Magmatism during Gondwana breakup

DEFF Research Database (Denmark)

van der Meer, Quinten; Scott, J.M.; Waight, Tod Earle

2013-01-01

Newly determined mid-late Cretaceous 40Ar/39Ar ages on megacrystic kaersutite from lamprophyre dikes in central and north Westland (New Zealand) are presented. These ages (88 Ma, 86 Ma and 68 Ma) indicate that the intrusion of mafic dikes was not necessarily restricted to the previously establish...

Ultramafic rocks of the western Idaho suture zone: Asbestos Peak and Misery Ridge

Energy Technology Data Exchange (ETDEWEB)

Godchaux, M.M. (Mount Holyoke Coll., South Hadley, MA (United States). Dept. of Geology); Bonnichsen, B. (Univ. of Idaho, Moscow, ID (United States))

1993-04-01

The Western Idaho Ultramafic Belt extends northward from the town of Weiser to the northern end of Dworshak Reservoir; in its northern portion most of the ultramafic bodies are localized along the suture zone where the Mesozoic oceanic accreted terranes meet the continental craton. Of the twenty bodies investigated, all are small, all are in fault contact with their metavolcanic and metasedimentary host rocks, all have been metamorphosed, and all display deformational fabrics in at least some portion of the outcrop area, suggesting that deformation continued after peak metamorphism. The degree of metamorphism ranges from incipient serpentinization to attainment of equilibrium in the upper amphibolite facies. Some bodies have been intruded by granitic dikes or pegmatite veins after emplacement, and have locally undergone contact metasomatism. Two particularly complex bodies, Asbestos Peak and Misery Ridge, were chosen for detailed petrographic and chemical study. Asbestos Peak is composed mostly of decussate anthophyllite-talc rock containing isolated patches of harzburgite protolith, and has blackwall border zones. Misery Ridge is composed mostly of coarse-grained sheared tremolite-talc schist without remnant protolith, and lacks true blackwall zones. Both bodies exhibit an unusual and enigmatic hornblende-poikiloblastic garnet-green spinel-skeletal ilmenite assemblage, present in some places as well-defined border zones and in other places as cross-cutting bodies.

Magmatism during Gondwana break-up : new geochronological data from Westland, New Zealand

International Nuclear Information System (INIS)

Van der Meer, Q.H.A.; Scott, J.M.; Waight, T.E.; Sudo, M.; Schersten, A.; Cooper, A.F.; Spell, T.L.

2013-01-01

Newly determined Late Cretaceous 40 Ar/ 39 Ar ages on megacrystic kaersutite from four lamprophyre dikes, and a U-Pb zircon age on a trachyte, from central and north Westland (New Zealand) are presented. These ages suggest that the intrusion of mafic dikes (88-86 and 69 Ma) was not necessarily restricted to the previously established narrow age range of 80-92 Ma. The younger lamprophyre and trachyte dikes (c. 68-70 Ma) imply that tensional stresses in the Western Province were either renewed at this time, or that extension and related magmatism continued during opening of the Tasman Sea. Extension-related magmatism in the region not only preceded Tasman seafloor spreading initiation (starting at c. 83 Ma, lasting to c. 53 Ma), but may have sporadically continued for up to 15 Ma after continental break-up. (author)

Occurrence model for magmatic sulfide-rich nickel-copper-(platinum-group element) deposits related to mafic and ultramafic dike-sill complexes: Chapter I in Mineral deposit models for resource assessment

Science.gov (United States)

Schulz, Klaus J.; Woodruff, Laurel G.; Nicholson, Suzanne W.; Seal, Robert R.; Piatak, Nadine M.; Chandler, Val W.; Mars, John L.

2014-01-01

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGE), account for approximately 60 percent of the world’s nickel production. Most of the remainder of the Ni production is derived from lateritic deposits, which form by weathering of ultramafic rocks in humid tropical conditions. Magmatic Ni-Cu±PGE sulfide deposits are spatially and genetically related to bodies of mafic and/or ultramafic rocks. The sulfide deposits form when the mantle-derived mafic and/or ultramafic magmas become sulfide-saturated and segregate immiscible sulfide liquid, commonly following interaction with continental crustal rocks.

Ultramafic-derived arsenic in a fractured bedrock aquifer

International Nuclear Information System (INIS)

Ryan, Peter C.; Kim, Jonathan; Wall, Andrew J.; Moen, Jonathan C.; Corenthal, Lilly G.; Chow, Daniel R.; Sullivan, Colleen M.; Bright, Kevin S.

2011-01-01

Highlights: → Arsenic is elevated in groundwater from a fractured bedrock aquifer system in northern Vermont, USA. → The arsenic source is serpentinized ultramafic rock. → Antigorite, magnetite (MgCO 3 ) and magnetite (Fe 3 O 4 ) appear to be the main mineralogical hosts of arsenic in the ultramafic rock. → Arsenic appears to be introduced to the ultramafic rock when As-bearing fluids are driven out of sediments during subduction. → The occurrence of serpentinized ultramafic rocks in many orogenic belts suggests that similar arsenic anomalies may occur in geologically-similar terranes globally. - Abstract: In the fractured bedrock aquifer of northern Vermont, USA, As concentrations in groundwater range from 3 ) with lesser amounts in magnetite (Fe 3 O 4 ). Hydrochemistry of monitoring wells drilled into fractured ultramafic rock in a groundwater recharge area with no anthropogenic As source reveals above background As (2-9 μg/L) and an Mg-HCO 3 hydrochemical signature that reflects dissolution of antigorite and magnesite, confirming that As in groundwater can be derived from ultramafic rock dissolution. Arsenic mobility in groundwater affected by ultramafic rock dissolution may be enhanced by alkaline pH values and relatively high HCO 3 - concentrations.

Olivine-hornblende-lamprophyre dikes from Quebrada los Sapos, El Teniente, Central Chile (34°S: implications for the temporal geochemical evolution of the Andean subarc mantle Diques lamprofídicos de olivino-hornblenda de la quebrada los Sapos, El Teniente, Chile central (34°S: implicancias para la evolución temporal de la geoquímica del manto subarco Andino

Directory of Open Access Journals (Sweden)

Charles R Stern

2011-01-01

Full Text Available Mafic Mg-olivine (Fo884-hornblende lamprophyre dikes, with Ni -190 ppm and Cr -390 ppm, cut late Miocene lavas in the Quebrada los Sapos a few kilometers west of the El Teniente Cu-Mo mine. These dikes have petro-chemical affinities with other less primitive, Pliocene (2.9-3.9 Ma, olivine-free lamprophyres previously described from both within and in the vicinity of El Teniente. The mafic mantle-derived lamprophyre dikes from Quebrada los Sapos have La/Yb ratios of 10-13, higher than the ratios of 4-9 for older Late Miocene El Teniente Mafic Complex olivine basalts, suggesting a temporal decrease in the percent of partial mantle melting, consistent with the observed decrease in the volume of igneous rocks through time at this latitude, as well as the ultímate cessation of magmatism and >40 km eastward are migration by the Late Pliocene. Less primitive olivine-free lamprophyres have higher La and lower Yb, resulting in higher La/Yb ratios of 15-44, due to crystal-liquid fractionation involving hornblende, but not plagioclase, the crystallization of which is suppressed by the high H2O contents of the lamprophyres. The lamprophyre dikes, as well as younger (1.8-2.3 Ma olivine-bearing basaltic-andesite lava flows in the valley of the Cachapoal river, have 87Sr/86Sr=0.7041 to 0.7049, or = +1.2 to -1.1 and 206Pb/204Pb=18.60 to 18.68, while Middle to Late Miocene (6.5-13.9 Ma El Teniente Volcanic and Plutonic Complex igneous rocks have lower 87Sr/86Sr=0.7039 to 0.7041 and 206Pb/204Pb=18.56 to 18.59, and higher G =+1.9 to +3.8, and older Oligocene to Early Miocene (>15 Ma Abanico or Coya-Machalí Formation volcanic and plutonic rocks in the region have even lower 87Sr/86Sr=0.7033 to 0.7039 and 206Pb/204Pb=18.45 to 18.57, and higher G Nd=+3.8 to +6.2. The data indicate a significant progressive temporal evolution, between the Oligocene and the Pliocene, to higher 87Sr/86Sr and 206Pb/204Pb, and lower for mantle-derived mafic magmas, and by implication

[Estimation of spur dike-affected fish habitat area].

Science.gov (United States)

Ray-Shyan, Wu; Yan-Ru, Chen; Yi-Liang, Ge

2012-04-01

Based on the HEC-RAS and River 2D modes, and taking 5% change rate of weighted usable area (WUA) as the threshold to define the spur dike- affected area of target fish species Acrossocheilus paradoxus in Fazi River in Taiwan, this paper studied the affected area of the fish habitat by spur dike, and, in combining with the references about the installations of spur dikes in Taiwan in recent 10 years, analyzed the relative importance of related affecting factors such as dike height, dike length (water block rate), average slope gradient of river way, single or double spur dike, and flow discharge. In spite of the length of the dike, the affected area in downstream was farther, and was about 2-6 times as large as that in upstream. The ratio of the affected area in downstream / upstream decreased with increasing slope gradient, but increased with increasing dike length and flow discharge. When the discharge was approximate to 10 years return periods, the ratio of the affected area would be close to a constant of 2. Building double spur dike would produce a better WUA than building single spur dike.

Breach growth in clay-dikes

OpenAIRE

Zhu, Y.

2006-01-01

Numerous flood disasters occur every year worldwide, mostly resulting from failure of dikes, some with catastrophic outcomes. Examples are the dike failures along the Yangtze River in China in 1931 due to heavy rainstorms and those in the Netherlands in 1953 due to a storm surge at the North Sea. Both floods induced many deaths and enormous economic losses. The consequences of a flood induced by a dike burst can vary strongly and depend mainly on the speed and rate of inundation of the polder...

Constraints on dike propagation from continuous GPS measurements

Science.gov (United States)

Segall, P.; Cervelli, Peter; Owen, S.; Lisowski, M.; Miklius, Asta

2001-01-01

The January 1997 East Rift Zone eruption on Kilauea volcano, Hawaii, occurred within a network of continuous Global Positioning System (GPS) receivers. The GPS measurements reveal the temporal history of deformation during dike intrusion, beginning ??? 8 hours prior to the onset of the eruption. The dike volume as a function of time, estimated from the GPS data using elastic Green's functions for a homogeneous half-space, shows that only two thirds of the final dike volume accumulated prior to the eruption and the rate of volume change decreased with time. These observations are inconsistent with simple models of dike propagation, which predict accelerating dike volume up to the time of the eruption and little or no change thereafter. Deflationary tilt changes at Kilauea summit mirror the inferred dike volume history, suggesting that the rate of dike propagation is limited by flow of magma into the dike. A simple, lumped parameter model of a coupled dike magma chamber system shows that the tendency for a dike to end in an eruption (rather than intrusion) is favored by high initial dike pressures, compressional stress states, large, compressible magma reservoirs, and highly conductive conduits linking the dike and source reservoirs. Comparison of model predictions to the observed dike volume history, the ratio of erupted to intruded magma, and the deflationary history of the summit magma chamber suggest that most of the magma supplied to the growing dike came from sources near to the eruption through highly conductive conduits. Interpretation is complicated by the presence of multiple source reservoirs, magma vesiculation and cooling, as well as spatial variations in dike-normal stress. Reinflation of the summit magma chamber following the eruption was measured by GPS and accompanied a rise in the level of the Pu'u O'o lava lake. For a spheroidal chamber these data imply a summit magma chamber volume of ??? 20 km3, consistent with recent estimates from seismic

Geologic map of Harrat Hutaymah, with petrologic classification and distribution of ultramafic inclusions, Saudi Arabia

Science.gov (United States)

Thornber, Carl R.

1990-01-01

This map shows detailed geology of the Quaternary and Tertiary volcanic deposits that comprise Harrat Hutaymah and an updated and generalized compilation of the underlying Proterozoic and Paleozoic basement rocks. Quaternary alluvial cover and details of basement geology (that is, faults, dikes, and other features) are not shown. Volcanic unit descriptions and contact relations are based upon field investigation by the author and on compilation and revision of mapping Kellogg (1984; northern half of area) and Pallister (1984; southern half of area). A single K-Ar date of 1.80 ± 0.05 Ma for an alkali olivine basalt flow transected by the Al Hutaymah tuff ring (Pallister, 1984) provides the basis for an estimated late Tertiary to Quaternary age range for all harrat volcanic units other than unit Qtr (tuff reworked during Quaternary age time). Contact relations and unit descriptions for the basement rocks were compiled from Pallister (1984), Kellogg (1984 and 1985), DuBray (1984), Johnson and Williams (1984), Vaslet and others (1987), Cole and Hedge (1986), and Richter and others (1984). All rock unit names in this report are informal and capitalization follows Saudi Arabian stratigraphic nomenclature (Fitch, 1980). Geographic information was compiled from Pallister (1984), Kellogg (1984), and Fuller (in Johnson and Williams, 1984) and from field investigation by the author in 1986. The pie diagrams on the map show the distribution and petrology of ultramafic xenoliths of Harrat Hutaymah. The pie diagrams are explained by a detailed classification of ultramafic xenoliths that is introduced in this report.

Revision of Scheumann’s classification of melilitic lamprophyres and related melilitic rocks in light of new analytical data

Czech Academy of Sciences Publication Activity Database

Ulrych, Jaromír; Adamovič, Jiří; Krmíček, L.; Ackerman, Lukáš; Balogh, K.

2014-01-01

Roč. 59, č. 1 (2014), s. 3-22 ISSN 1802-6222 R&D Projects: GA AV ČR IAA300130902 Institutional support: RVO:67985831 Keywords : melilitic rocks * lamprophyres * polzenites * classification * geochemistry * Bohemian Massif Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.405, year: 2014

Asymmetrical to symmetrical magnetic fabric of dikes: Paleo-flow orientations and Paleo-stresses recorded on feeder-bodies from the Motru Dike Swarm (Romania)

Science.gov (United States)

Féménias, Olivier; Diot, Hervé; Berza, Tudor; Gauffriau, Antoine; Demaiffe, Daniel

2004-08-01

The fabric in a dike is representative of the magmatic flow, considered as Newtonian. The anisotropy of magnetic susceptibility of the rocks gives a good representation of the shape-preferred orientation which, in turn, is a marker of the magmatic flow. Generally, a symmetrical pattern of the fabric across the dike is in agreement with a flow of magma within a channel: the flow direction is then reliable with this imbrication. An asymmetrical fabric is dependent on the flow and displacement of the wall. We present the case of both symmetrical and asymmetrical dike fabrics recording different emplacements. From a Pan-African calc-alkaline dike swarm (of basaltic-andesitic-dacitic-rhyolitic composition) of the Alpine Danubian window from South Carpathians (Romania), two populations of dikes have been described: thick (1-30 m) N-S-trending dikes and thin (movement of the walls. In contrast, the thin dikes are symmetrical and frequently display an arteritic morphology that limits the dike length, with no cartographic extension. We propose to relate the two types of dikes to the same regional stress field in a continuum of emplacement during a regional brittle event.

Dike zones on Venus

Science.gov (United States)

Markov, M. S.; Sukhanov, A. L.

1987-01-01

Venusian dike zone structures were identified from Venera 15 and 16 radar images. These include: a zone of subparallel rows centered at 30 deg N, 7 deg E; a system of intersecting bands centered at 67 deg N, 284 deg E; polygonal systems in lavas covering the structural base uplift centered at 47 deg N, 200 deg E; a system of light bands in the region of the ring structure centered at 43 deg N, 13 deg E; and a dike band centered at 27 deg N, 36 deg E.

Magma flow through elastic-walled dikes

NARCIS (Netherlands)

Bokhove, Onno; Woods, A.W.; de Boer, A

2005-01-01

A convection–diffusion model for the averaged flow of a viscous, incompressible magma through an elastic medium is considered. The magma flows through a dike from a magma reservoir to the Earth’s surface; only changes in dike width and velocity over large vertical length scales relative to the

Graben Formation and Dike Arrest during the 2009 Harrat Lunayyir Dike Intrusion in Saudi Arabia: Insights from InSAR, Stress Calculations and Analog Experiments

KAUST Repository

Xu, Wenbin; Jonsson, Sigurjon; Corbi, Fabio; Rivalta, Eleonora

2016-01-01

Detailed spatial and temporal accounts of propagating dikes from crustal deformation data, including their interplay with faulting, are rare, leaving many questions about how this interplay affects graben formation and the arrest of dikes unanswered. Here we use InSAR observations, stress calculations and analog experiments to investigate the interaction between an intruding dike and normal faulting during the 2009 Harrat Lunayyir dike intrusion in western Saudi Arabia. We generated five displacement maps from InSAR data to unravel the temporal evolution of deformation covering the majority of the intrusion. We find that the observed surface displacements can be modeled by a ~2-m-thick dike with an upper tip ~2 km below the surface on 16 May 2009, four weeks after the onset of seismic unrest. In the following three days, the dike propagated to within ~1 km of the surface with graben-bounding normal faulting dominating the near-field deformation. The volume of the dike doubled between mid-May and mid-June. We carried out analog experiments that indicate that the wedge-shaped graben grew outwards with the faulting style changing progressively from normal faulting to oblique. Coulomb failure stress change calculations show that the intruding dike caused two zones of shallow horizontal tension on both sides of the dike, producing two zones of fissuring and normal faulting at the surface. In return, the faulting provoked compression around the upper tip of the dike, holding back its vertical propagation.

Graben Formation and Dike Arrest during the 2009 Harrat Lunayyir Dike Intrusion in Saudi Arabia: Insights from InSAR, Stress Calculations and Analog Experiments

KAUST Repository

Xu, Wenbin

2016-03-04

Detailed spatial and temporal accounts of propagating dikes from crustal deformation data, including their interplay with faulting, are rare, leaving many questions about how this interplay affects graben formation and the arrest of dikes unanswered. Here we use InSAR observations, stress calculations and analog experiments to investigate the interaction between an intruding dike and normal faulting during the 2009 Harrat Lunayyir dike intrusion in western Saudi Arabia. We generated five displacement maps from InSAR data to unravel the temporal evolution of deformation covering the majority of the intrusion. We find that the observed surface displacements can be modeled by a ~2-m-thick dike with an upper tip ~2 km below the surface on 16 May 2009, four weeks after the onset of seismic unrest. In the following three days, the dike propagated to within ~1 km of the surface with graben-bounding normal faulting dominating the near-field deformation. The volume of the dike doubled between mid-May and mid-June. We carried out analog experiments that indicate that the wedge-shaped graben grew outwards with the faulting style changing progressively from normal faulting to oblique. Coulomb failure stress change calculations show that the intruding dike caused two zones of shallow horizontal tension on both sides of the dike, producing two zones of fissuring and normal faulting at the surface. In return, the faulting provoked compression around the upper tip of the dike, holding back its vertical propagation.

Intrusion of lamprophyre dyke and related deformation effects in the host rock salt: A case study from the Loulé diapir, Portugal

Czech Academy of Sciences Publication Activity Database

Machek, Matěj; Roxerová, Zuzana; Závada, Prokop; Silva, P. F.; Henry, B.; Dědeček, Petr; Petrovský, Eduard; Marques, F. O.

2014-01-01

Roč. 629, August (2014), s. 165-178 ISSN 0040-1951 Institutional support: RVO:67985530 Keywords : AMS * lamprophyre dyke * rock salt * paleomagnetism * microstructure * CPO Subject RIV: DB - Geology ; Mineralogy Impact factor: 2.872, year: 2014

Ultramafic-derived arsenic in a fractured bedrock aquifer

Science.gov (United States)

Ryan, P.C.; Kim, J.; Wall, A.J.; Moen, J.C.; Corenthal, L.G.; Chow, D.R.; Sullivan, C.M.; Bright, K.S.

2011-01-01

In the fractured bedrock aquifer of northern Vermont, USA, As concentrations in groundwater range from chemical extraction, X-ray diffraction (XRD) and stoichiometric analysis indicates that the majority of the As is located in antigorite and magnesite (MgCO3) with lesser amounts in magnetite (Fe3O4). Hydrochemistry of monitoring wells drilled into fractured ultramafic rock in a groundwater recharge area with no anthropogenic As source reveals above background As (2-9??g/L) and an Mg-HCO3 hydrochemical signature that reflects dissolution of antigorite and magnesite, confirming that As in groundwater can be derived from ultramafic rock dissolution. Arsenic mobility in groundwater affected by ultramafic rock dissolution may be enhanced by alkaline pH values and relatively high HCO3- concentrations. ?? 2011 Elsevier Ltd.

Hydraulic model tests of an innovative dike crest design

NARCIS (Netherlands)

Verhagen, H.J.; Kortenhaus, A.; Bollinger, K.; Dassayanake, D.

2007-01-01

Report on laboratory tests on a crest drainage dike; investigation if a channel in the crest of the dike is able to decrease the amount of overtopping over the dike. Chapter 2 provides details about findings from previous studies and the relevance of those findings to this research project.

The U-Pb System in Schorlomite from Calcite-Amphobole-Pyroxene Pegmatite of the Afrikanda Complex (Kola Peninsula)

Science.gov (United States)

Salnikova, E. B.; Stifeeva, M. V.; Chakhmouradian, A. R.; Glebovitsky, V. A.; Reguir, E. P.

2018-02-01

The geochronological U-Pb study of shorlomite from igneous rocks of the alkali-ultramafic Afrikanda massif (Kola Peninsula) was performed. The results demonstrate the reliability of calcium garnet as a mineral for the U-Pb geochronology of a wide range of igneous rocks, i.e., carbonatite, syenite, foidolite, foidite, melilitolite, melilitite, lamprophyres, micaceous kimberlites, etc., and associated rare earth and trace elements (REE, Nb, Zr) mineralization.

Dike Propagation Near Drifts

International Nuclear Information System (INIS)

2002-01-01

The purpose of this Analysis and Model Report (AMR) supporting the Site Recommendation/License Application (SR/LA) for the Yucca Mountain Project is the development of elementary analyses of the interactions of a hypothetical dike with a repository drift (i.e., tunnel) and with the drift contents at the potential Yucca Mountain repository. This effort is intended to support the analysis of disruptive events for Total System Performance Assessment (TSPA). This AMR supports the Process Model Report (PMR) on disruptive events (CRWMS M and O 2000a). This purpose is documented in the development plan (DP) ''Coordinate Modeling of Dike Propagation Near Drifts Consequences for TSPA-SR/LA'' (CRWMS M and O 2000b). Evaluation of that Development Plan and the work to be conducted to prepare Interim Change Notice (ICN) 1 of this report, which now includes the design option of ''Open'' drifts, indicated that no revision to that DP was needed. These analyses are intended to provide reasonable bounds for a number of expected effects: (1) Temperature changes to the waste package from exposure to magma; (2) The gas flow available to degrade waste containers during the intrusion; (3) Movement of the waste package as it is displaced by the gas, pyroclasts and magma from the intruding dike (the number of packages damaged); (4) Movement of the backfill (Backfill is treated here as a design option); (5) The nature of the mechanics of the dike/drift interaction. These analyses serve two objectives: to provide preliminary analyses needed to support evaluation of the consequences of an intrusive event and to provide a basis for addressing some of the concerns of the Nuclear Regulatory Commission (NRC) expressed in the Igneous Activity Issue Resolution Status Report

Experimental investigation of fluvial dike breaching due to flow overtopping

Science.gov (United States)

El Kadi Abderrezzak, K.; Rifai, I.; Erpicum, S.; Archambeau, P.; Violeau, D.; Pirotton, M.; Dewals, B.

2017-12-01

The failure of fluvial dikes (levees) often leads to devastating floods that cause loss of life and damages to public infrastructure. Overtopping flows have been recognized as one of the most frequent cause of dike erosion and breaching. Fluvial dike breaching is different from frontal dike (embankments) breaching, because of specific geometry and boundary conditions. The current knowledge on the physical processes underpinning fluvial dike failure due to overtopping remains limited. In addition, there is a lack of a continuous monitoring of the 3D breach formation, limiting the analysis of the key mechanisms governing the breach development and the validation of conceptual or physically-based models. Laboratory tests on breach growth in homogeneous, non-cohesive sandy fluvial dikes due to flow overtopping have been performed. Two experimental setups have been constructed, permitting the investigation of various hydraulic and geometric parameters. Each experimental setup includes a main channel, separated from a floodplain by a dike. A rectangular initial notch is cut in the crest to initiate dike breaching. The breach development is monitored continuously using a specific developed laser profilometry technique. The observations have shown that the breach develops in two stages: first the breach deepens and widens with the breach centerline being gradually shifted toward the downstream side of the main channel. This behavior underlines the influence of the flow momentum component parallel to the dike crest. Second, the dike geometry upstream of the breach stops evolving and the breach widening continues only toward the downstream side of the main channel. The breach evolution has been found strongly affected by the flow conditions (i.e. inflow discharge in the main channel, downstream boundary condition) and floodplain confinement. The findings of this work shed light on key mechanisms of fluvial dike breaching, which differ substantially from those of dam

Magma Reservoirs Feeding Giant Radiating Dike Swarms: Insights from Venus

Science.gov (United States)

Grosfils, E. B.; Ernst, R. E.

2003-01-01

Evidence of lateral dike propagation from shallow magma reservoirs is quite common on the terrestrial planets, and examination of the giant radiating dike swarm population on Venus continues to provide new insight into the way these complex magmatic systems form and evolve. For example, it is becoming clear that many swarms are an amalgamation of multiple discrete phases of dike intrusion. This is not surprising in and of itself, as on Earth there is clear evidence that formation of both magma reservoirs and individual giant radiating dikes often involves periodic magma injection. Similarly, giant radiating swarms on Earth can contain temporally discrete subswarms defined on the basis of geometry, crosscutting relationships, and geochemical or paleomagnetic signatures. The Venus data are important, however, because erosion, sedimentation, plate tectonic disruption, etc. on Earth have destroyed most giant radiating dike swarm's source regions, and thus we remain uncertain about the geometry and temporal evolution of the magma sources from which the dikes are fed. Are the reservoirs which feed the dikes large or small, and what are the implications for how the dikes themselves form? Does each subswarm originate from a single, periodically reactivated reservoir, or do subswarms emerge from multiple discrete geographic foci? If the latter, are these discrete foci located at the margins of a single large magma body, or do multiple smaller reservoirs define the character of the magmatic center as a whole? Similarly, does the locus of magmatic activity change with time, or are all the foci active simultaneously? Careful study of giant radiating dike swarms on Venus is yielding the data necessary to address these questions and constrain future modeling efforts. Here, using giant radiating dike swarms from the Nemesis Tessera (V14) and Carson (V43) quadrangles as examples, we illustrate some of the dike swarm focal region diversity observed on Venus and briefly explore some

Modeling of self-potential anomalies near vertical dikes.

Science.gov (United States)

Fitterman, D.V.

1983-01-01

The self-potential (SP) Green's function for an outcropping vertical dike is derived from solutions for the dc resistivity problem for the same geometry. The Green's functions are numerically integrated over rectangular source regions on the contacts between the dike and the surrounding material to obtain the SP anomaly. The analysis is valid for thermoelectrical source mechanisms. Two types of anomalies can be produced by this geometry. When the two source planes are polarized in opposite directions, a monopolar anomaly is produced. This corresponds to the thermoelectrical properties of the dike being in contrast with the surrounding material. When the thermoelectric coefficients change monotonically across the dike, a dipolar anomaly is produced. In either case positive and negative anomalies are possible, and the greatest variation in potential will occur in the most resistive regions. -Author

Magma Expansion and Fragmentation in a Propagating Dike (Invited)

Science.gov (United States)

Jaupart, C. P.; Taisne, B.

2010-12-01

The influence of magma expansion due to volatile exsolution and gas dilation on dike propagation is studied using a new numerical code. Many natural magmas contain sufficient amounts of volatiles for fragmentation to occur well below Earth's surface. Magma fragmentation has been studied for volcanic flows through open conduits but it should also occur within dikes that rise towards Earth's surface. We consider the flow of a volatile-rich magma in a hydraulic fracture. The mixture of melt and gas is treated as a compressible viscous fluid below the fragmentation level and as a gas phase carrying melt droplets above it. A numerical code solves for elastic deformation of host rocks, the flow of the magmatic mixture and fracturing at the dike tip. With volatile-free magma, a dike fed at a constant rate in a uniform medium adopts a constant shape and width and rises at a constant velocity. With volatiles involved, magma expands and hence the volume flux of magma increases. With no fragmentation, this enhanced flux leads to acceleration of the dike. Simple scaling laws allow accurate predictions of dike width and ascent rate for a wide range of conditions. With fragmentation, dike behavior is markedly different. Due to the sharp drop of head loss that occurs in gas-rich fragmented material, large internal overpressures develop below the tip and induce swelling of the nose region, leading to deceleration of the dike. Thus, the paradoxical result is that, with no viscous impediment on magma flow and a large buoyancy force, the dike stalls. This process may account for some of the tuffisite veins and intrusions that are found in and around magma conduits, notably in the Unzen drillhole, Japan. We apply these results to the two-month long period of volcanic unrest that preceded the May 1980 eruption of Mount St Helens. An initial phase of rapid earthquake migration from the 7-8 km deep reservoir to shallow levels was followed by very slow progression of magma within the

Mesoproterozoic diamondiferous ultramafic pipes at Majhgawan ...

Indian Academy of Sciences (India)

tial melt depletion prior to subsequent metaso- matic enrichment ... diferous ultramafic pipes (considered in this paper to belong to ...... at the Department of Earth Sciences, University of .... Int. Kimberlite Conference, Victoria, British Columbia,.

Geometric and kinematic features of the dike complex at Mt. Somma, Vesuvio (Italy)

Science.gov (United States)

Porreca, M.; Acocella, V.; Massimi, E.; Mattei, M.; Funiciello, R.; De Benedetti, A. A.

2006-05-01

Dikes provide important information on the structure, state of stress and activity of a volcano. Mt. Somma borders part of the Vesuvio cone (Italy), displaying ˜ 100 dikes emplaced between ˜ 18 and 30 ka. Field, AMS (anisotropy of magnetic susceptibility) and thin section analyses are used to characterize their geometry and kinematics (direction and sense of flow). The dikes mostly have a NNW-SSE to NE-SW strike. Approximately 57% are radial to the older Somma edifice, ˜ 27% are oblique and ˜ 16% tangential. Among the latter two groups, ˜ 32% are outward dipping and ˜ 11% inward dipping. The dike thickness varies between 0.2 and 3 m, with a mean value of 1.17 m. The kinematics of 19 dikes is determined through a combination of field (8 dikes), AMS (16 dikes) and thin section analyses (15 dikes). Thirteen dikes have a vertical upward flow, whereas six have an oblique-subhorizontal flow, suggesting a lateral propagation from the summit or eccentric vents of the former Somma edifice. These propagation paths differ from those deducible from the recent activity, as all the seven major fissure eruptions between 1631 and 1944 were related to the lateral propagation of radial dikes. We propose that these different behaviours in dike propagation may be mainly related to the opening conditions of the summit conduit. The laterally propagating dikes in 1631-1944 formed with an open conduit. Conversely, the vertically propagating dikes may have formed, between 18 and 30 ka, with a closed conduit.

Lamprophyres from the Harohalli dyke swarm in the Halaguru and Mysore areas, Southern India: Implications for backarc basin magmatism

Science.gov (United States)

Lanjewar, Shubhangi; Randive, Kirtikumar

2018-05-01

The Bangalore and Harohalli dyke swarms occur in the eastern part of the Dharwar craton. The older Bangalore dyke swarm is made up of dolerites, trending east-west, and the younger contains alkaline dykes that trend approximately north-south. The lamprophyres of the Harohalli dyke swarm occur in the Halaguru and Mysore industrial areas where they are exposed as fresh porphyritic - panidiomorphic dykes, containing crustal xenoliths, and showing chilled contacts with the country rock charnokites. They are chiefly composed of amphiboles which form well-developed phenocrysts. Clinopyroxenes are present in some of the dykes. Compositional zoning is observed in clinopyroxenes and amphiboles; their zoning patterns indicate that the magma experienced cryptic variations and that fractional crystallization was a dominant process in the evolution of the Harohalli Lamprophyres (HRL). The HRL are calc-alkaline with shoshonitic affinity and exhibit a K2O/Na2O ratio of ∼1. They show primitive (MORB-like) trace-element characters. LILE and LREE both show marginally enriched patterns; whereas HFSE and HREE show strongly depleted patterns. In the regional geologic sense, HRL dykes are characterised by two major influences; namely, (i) primary source region characteristics, which are geochemically more primitive, roughly falling within fields of primitive - MORB and enriched- MORB and (ii) the continental lithosphere. The data points for the HRL distinctly show their proximity to N-MORB and scatter towards the continental crust. Moreover, features like xenolith assimilation might influence the trace-element characteristics of the HRL dykes. Such magmas with mixed characters can be formed in a backarc basin environment. Geochemical proxies such as Ba/Nb vs Nb/Yb, Ba/Th vs Th/Nb, and the water content of magmas; which have been effectively used for discriminating backarc basin magmas worldwide, also indicate that the HRL magmas were generated in a backarc environment with inputs from

Engineering evaluation of porous-dike intake screening systems

International Nuclear Information System (INIS)

Roberge, J.C.

1978-01-01

As one of many concepts currently under investigation for use in screening fish and larvae from power plant intakes, the porous-dike system presents unique challenges to the designer and constructor. A complete understanding of the hydraulic losses through such a structure is necessary to properly size and locate the intake and to ensure proper pump selection and performance. In the study described in this report, an analogy with frictional losses in conduits was employed, and empirical data on losses were determined for three sizes of filter stone typical of the types used in the construction of a porous-dike intake system. These empirical data were compared with additional information from the literature. The dependence of hydraulic losses through large-diameter media on stone shape and porosity were demonstrated although no empirical expression of this dependence was developed. A hypothetical porous-dike intake installation was developed, demonstrating the fundamental design considerations which must be made for such a structure. Finally, a cursory economic comparison of various intake screening systems demonstrated that the porous-dike intake concept was economically competitive with all others

Propagation of dikes at Vesuvio (Italy) and the effect of Mt. Somma

Science.gov (United States)

Acocella, V.; Porreca, M.; Neri, M.; Massimi, E.; Mattei, M.

2006-04-01

Dikes provide crucial information on how magma propagates within volcanoes. Somma-Vesuvio (Italy) consists of the active Vesuvio cone, partly bordered by the older Mt. Somma edifice. Historical chronicles on the fissure eruptions in 1694-1944 are matched with an analytical solution to define the propagation path of the related dikes and to study any control of the Mt. Somma relief. The fissures always consisted of the downslope migration of vents from an open summit conduit, indicating lateral propagation as the predominant mechanism for shallow dike emplacement. No fissure emplaced beyond Mt. Somma, suggesting that its buttressing hinders the propagation of the radial dikes. An analytical solution is defined to describe the mechanism of formation of the laterally propagating dikes and to evaluate the effect of topography. The application to Somma-Vesuvio suggests that, under ordinary excess magmatic pressures, the dikes should not propagate laterally at depths >240-480 m below the surface, as the increased lithostatic pressure requires magmatic pressures higher than average. This implies that, when the conduit is open, the lateral emplacement of dikes is expectable on the S, W and E slopes. The lack of fissures N of Mt. Somma is explained by its buttressing, which hinders dike propagation.

Automatic Monitoring System Design and Failure Probability Analysis for River Dikes on Steep Channel

Science.gov (United States)

Chang, Yin-Lung; Lin, Yi-Jun; Tung, Yeou-Koung

2017-04-01

The purposes of this study includes: (1) design an automatic monitoring system for river dike; and (2) develop a framework which enables the determination of dike failure probabilities for various failure modes during a rainstorm. The historical dike failure data collected in this study indicate that most dikes in Taiwan collapsed under the 20-years return period discharge, which means the probability of dike failure is much higher than that of overtopping. We installed the dike monitoring system on the Chiu-She Dike which located on the middle stream of Dajia River, Taiwan. The system includes: (1) vertical distributed pore water pressure sensors in front of and behind the dike; (2) Time Domain Reflectometry (TDR) to measure the displacement of dike; (3) wireless floating device to measure the scouring depth at the toe of dike; and (4) water level gauge. The monitoring system recorded the variation of pore pressure inside the Chiu-She Dike and the scouring depth during Typhoon Megi. The recorded data showed that the highest groundwater level insides the dike occurred 15 hours after the peak discharge. We developed a framework which accounts for the uncertainties from return period discharge, Manning's n, scouring depth, soil cohesion, and friction angle and enables the determination of dike failure probabilities for various failure modes such as overtopping, surface erosion, mass failure, toe sliding and overturning. The framework was applied to Chiu-She, Feng-Chou, and Ke-Chuang Dikes on Dajia River. The results indicate that the toe sliding or overturning has the highest probability than other failure modes. Furthermore, the overall failure probability (integrate different failure modes) reaches 50% under 10-years return period flood which agrees with the historical failure data for the study reaches.

METHODOLOGY FOR HYDRAULIC CALCULATION OF RIVER REGULATION AND DETERMINATION OF DIKE PARAMETERS

Directory of Open Access Journals (Sweden)

E. I. Mikhnevich

2017-01-01

Full Text Available Territory protection against flood water inundation and creation of polder systems are carried out with the help of protection dikes. One of the main requirements to the composition of polder systems in flood plains is a location of border dikes beyond meander belt in order to avoid their erosion when meander development occurs. Meander belt width can be determined on the basis of the analysis of multi-year land surveying pertaining top river-bed building and in the case when such data is not available this parameter is calculated in accordance with the Snishchenko formula. While banking-up a river bed a flooded area is decreasing and, consequently, water level in inter-dike space and rate of flood water are significantly increasing. For this reason it is necessary to locate dikes at a such distance from a river bed which will not cause rather high increase in water level and flow velocity in the inter-dike space. Methodology for hydraulic calculation of river regulation has been developed in order to substantiate design parameters for levee systems, creation of favourable hydraulic regime in these systems and provision of sustainability for dikes. Its main elements are calculations of pass-through capacity of the leveed channel and rise of water level in inter-dike space, and distance between dikes and their crest level. Peculiar feature of the proposed calculated formulae is an interaction consideration of channel and inundated flows. Their mass-exchanging process results in slowing-down of the channel flow and acceleration of the inundated flow. This occurrence is taken into account and coefficients of kinematic efficiency are introduced to the elements of water flow rate in the river channel and flood plain, respectively. The adduced dependencies for determination of a dike crest level (consequently their height take into consideration a rise of water level in inter-dike space for two types of polder systems: non-inundable (winter dikes with

Overview of Hole GT3A: The sheeted dike/gabbro transition

Science.gov (United States)

Abe, N.; Harris, M.; Michibayashi, K.; de Obeso, J. C.; Kelemen, P. B.; Takazawa, E.; Teagle, D. A. H.; Coggon, J. A.; Matter, J. M.; Phase I Science Party, T. O. D. P.

2017-12-01

Hole GT3A (23.11409 N, 58.21172 E) was drilled by the Oman Drilling Project (OmDP) into Wadi Abdah of the Samail ophiolite, Oman. OmDP is an international collaboration supported by the International Continental Scientifi1c Drilling Program, the Deep Carbon Observatory, NSF, IODP, JAMSTEC, and the European, Japanese, German and Swiss Science Foundations, with in-kind support in Oman from the Ministry of Regional Municipalities and Water Resources, Public Authority of Mining, Sultan Qaboos University, and the German University of Technology. Hole GT3A was diamond cored in February to March 2017 to a total depth of 400 m. The outer surfaces of the cores were imaged and described on site before being curated, boxed and shipped to the IODP drill ship Chikyu, where they underwent comprehensive visual and instrumental analysis. Hole GT3A recovered predominantly sheeted dikes and gabbros and has been sub-divided into 4 igneous groups based on the abundance of gabbro downhole. Group 1 (Upper Sheeted Dike Sequence) occurs from 0 to 111.02 m, group II (Upper Gabbro Sequence) is from 111.02 to 127.89 m, group III (Lower Sheeted Dike Sequence) is between 127.89 to 233.84 m and group IV (Lower Gabbro Sequence) is from 233.84 to 400 m. Group II and IV are both associated with almost equal proportions of dikes to gabbroic lithologies, whereas group I & III have >95% dikes. The sheeted dikes were logged as either basalt (46.9 %) or diabase (26.2 %) depending on the predominant grain size of the dike. Gabbroic lithologies include (most to least abundant) gabbro, oxide gabbro and olivine gabbro. Other lithologies present include diorite (7.5%) and tonalite and trondhjemite (1%). Tonalite and trondhjemite are present as cm-sized dikelets and are found within group II and IV. Gabbroic lithologies generally display a varitextured appearance and are characterised by the co-existence of poikilitic and granular domains. Detailed observations of chilled margins and igneous contacts reveal

Geological characteristics of dike-structural belt in Taoshan orefield and its relationship to uranium deposits

International Nuclear Information System (INIS)

Zhang Wanliang; Zou Maoqing; Shao Fei; Nie Bin

2009-01-01

Taoshan uranium field is occurred in the Taoshan composite batholith in the central Jiangxi Province. The main body of the batholith was formed in Triassic-Early Cretaceous. In Late Cretaceous-Eogene, NE strike fault structure and dike belt were developed in the batholith. From the north to the south, there are successive Xiaobu-Matian dike-structural belt, Wangnitian dike- structural belt, Huangtan-Yueyuan dike-structural belt, Xibei-Shangluo dike-structural belt, Jipoling dike-structural belt, Wangce dike-structural belt and Shiyuanling dike-structural belt. These belts are controlled by the main fault, share the same space and similar time with the uranium mineralization, which is one of the important factors in positioning the uranium ore as well as the prospecting direction of exploration. (authors)

Clastic dike from Baga, Goa

Digital Repository Service at National Institute of Oceanography (India)

Setty, M.G.A.P.; Wagle, B.G.

analogous to igneous dikes in appearance and also in their field relationships. These are injections of mobilized sediment into fracture zones and bedding planes of sedimentary sequences and reported from widely scattered regions throughout the world...

New Experiences in Dike Construction with Soil-Ash Composites and Fine-Grained Dredged Materials

Directory of Open Access Journals (Sweden)

Duszyński Remigiusz

2017-12-01

Full Text Available The supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction properties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed materials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dike cover materials resulting in economical, environmentally friendly and sustainable dikes. Ash from EC Gdańsk and dredged sand from the Vistula river were mixed to form an engineering material used for dike construction. The optimum sand-ash composites were applied at a field test site to build a large-scale research dike. Fine-grained dredged materials from Germany were chosen to be applied in a second full-scale research dike in Rostock. All materials were investigated according to the standards for soil mechanical analysis. This includes basic soil properties, mechanical characteristics, such as grain-size distribution, compaction parameters, compressibility, shear strength, and water permeability. In the field, the infiltration of water into the dike body as well as the erosion resistance of the cover material against overflowing water was determined. Results of both laboratory and field testing are discussed in this paper. In conclusion, the mixing of bottom ash with mineral soil, such as relatively uniform dredged sand, fairly improves the geotechnical parameters of the composite, compared to the constituents. Depending on the composite, the materials may be suitable to build a dike core or an erosion-resistant dike cover.

New Experiences in Dike Construction with Soil-Ash Composites and Fine-Grained Dredged Materials

Science.gov (United States)

Duszyński, Remigiusz; Duszyńska, Angelika; Cantré, Stefan

2017-12-01

The supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction properties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed materials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dike cover materials resulting in economical, environmentally friendly and sustainable dikes. Ash from EC Gdańsk and dredged sand from the Vistula river were mixed to form an engineering material used for dike construction. The optimum sand-ash composites were applied at a field test site to build a large-scale research dike. Fine-grained dredged materials from Germany were chosen to be applied in a second full-scale research dike in Rostock. All materials were investigated according to the standards for soil mechanical analysis. This includes basic soil properties, mechanical characteristics, such as grain-size distribution, compaction parameters, compressibility, shear strength, and water permeability. In the field, the infiltration of water into the dike body as well as the erosion resistance of the cover material against overflowing water was determined. Results of both laboratory and field testing are discussed in this paper. In conclusion, the mixing of bottom ash with mineral soil, such as relatively uniform dredged sand, fairly improves the geotechnical parameters of the composite, compared to the constituents. Depending on the composite, the materials may be suitable to build a dike core or an erosion-resistant dike cover.

Platinum group elements geochemistry of ultramafic and associated ...

Indian Academy of Sciences (India)

group element (PGE) and associated gold mineralization in these ultramafic rocks. A mineral ... Paleoproterozoic age, mostly emplaced into the .... tified reference materials (CRM) from the US Geo- ..... Classification diagram (Barnes et al.

Geochemistry of the alkaline volcanicsubvolcanic rocks of the Fernando de Noronha Archipelago, southern Atlantic Ocean

Directory of Open Access Journals (Sweden)

Rosana Peporine Lopes

Full Text Available The Fernando de Noronha Archipelago presents, on its main island, a centrally-located stratigraphic unit, the Remédios Formation (age around 8 - 12 Ma constituted by basal pyroclastic rocks intruded by dikes, plugs and domes of varied igneous rocks, capped by flows and pyroclastics of mafic to ultramafic rocks of the Quixaba Formation (age around 1 - 3 Ma, which is limited from the underlying unit by an extensive irregular erosion surface. A predominant sodic Remédios series (basanites, tephrites, tephriphonolites, essexite, phonolites can be separated from a moderately potassic Remédios sequence (alkali basalts, trachyandesites, trachytes, both alkaline series showing mostly continuous geochemical trends in variation diagrams for major as well as trace elements, indicating evolution by crystal fractionation (mainly, separation of mafic minerals, including apatites and titanites. There are textural and mineralogical evidences pointing to hybrid origin of some intermediate rocks (e.g., resorbed pyroxene phenocrysts in basaltic trachyandesites, and in some lamprophyres. The primitive Quixaba rocks are mostly melanephelinites and basanites, primitive undersaturated sodic types. Geology (erosion surface, stratigraphy (two distinct units separated by a large time interval, petrography (varied Remédios Formation, more uniform Quixaba unit and geochemistry indicate that the islands represent the activity of a protracted volcanic episode, fueled by intermittent melting of an enriched mantle, not related to asthenospheric plume activity.

Analysis of Overtopping Flow on Sea Dikes in Oblique and Short-Crested Waves

DEFF Research Database (Denmark)

Nørgaard, Jørgen Harck; Andersen, Thomas Lykke; Burcharth, Hans F.

2013-01-01

-empirical formulae for the estimation of flow depths and flow velocities across a dike. The results have been coupled to the actual erosion of the landward dike slope determined by full-scale 2D tests using the so-called “Overtopping Simulator”. This paper describes the results from 96 small-scale tests carried out...... directions on the dike, and the statistical distribution of individual flow parameters are needed to obtain more realistic estimates of dike erosion caused by wave overtopping....

Dike-induced contraction along oceanic and continental divergent plate boundaries

KAUST Repository

Trippanera, D.

2014-10-28

The axis of divergent plate boundaries shows extension fractures and normal faults at the surface. Here we present evidence of contraction along the axis of the oceanic ridge of Iceland and the continental Main Ethiopian Rift. Contraction is found at the base of the tilted hanging wall of dilational normal faults, balancing part of their extension. Our experiments suggest that these structures result from dike emplacement. Multiple dike injection induces subsidence above and uplift to the sides of the dikes; the transition in between is accommodated by reverse faults and subsequent peripheral inward dipping normal faults. Our results suggest that contraction is a direct product of magma emplacement along divergent plate boundaries, at various scales, marking a precise evolutionary stage and initiating part of the extensional structures (extension fractures and normal faults). Key Points Contraction along divergent plate boundaries results from dike emplacementContraction generates extensional structures along divergent plate boundariesSurface deformation along divergent plate boundaries may be magma induced

Dike-induced contraction along oceanic and continental divergent plate boundaries

KAUST Repository

Trippanera, D.; Acocella, V.; Ruch, Joel

2014-01-01

The axis of divergent plate boundaries shows extension fractures and normal faults at the surface. Here we present evidence of contraction along the axis of the oceanic ridge of Iceland and the continental Main Ethiopian Rift. Contraction is found at the base of the tilted hanging wall of dilational normal faults, balancing part of their extension. Our experiments suggest that these structures result from dike emplacement. Multiple dike injection induces subsidence above and uplift to the sides of the dikes; the transition in between is accommodated by reverse faults and subsequent peripheral inward dipping normal faults. Our results suggest that contraction is a direct product of magma emplacement along divergent plate boundaries, at various scales, marking a precise evolutionary stage and initiating part of the extensional structures (extension fractures and normal faults). Key Points Contraction along divergent plate boundaries results from dike emplacementContraction generates extensional structures along divergent plate boundariesSurface deformation along divergent plate boundaries may be magma induced

How diking affects the longer-term structure and evolution of divergent plate boundaries

KAUST Repository

Trippanera, Daniele

2015-04-01

Recurrent diking episodes along divergent plate boundaries, as at Dabbahu (2005, Afar) or at Bardarbunga (2014, Iceland) , highlight the possibility to have m-wide opening in a short time (days to weeks). This suggests a prominent role of magma enhancing transient plate separations. However, the role of diking on a longer term (> 102 years) and its influence on the structure and the evolution of a divergent plate boundary is still poorly investigated. Here we use field surveys along the oceanic Icelandic and continental Ethiopian plate boundaries, along five eruptive fissures and four rift segments. Field observations have also been integrated with analogue and numerical models of dike emplacement to better understand the effect of dike emplacement at depth and at the surface. Our results show that the dike-fed eruptive fissures are systematically associated with graben structures formed by inward dipping normal faults having throws up to 10 m and commonly propagating downward. Moreover, rift segments (i.e. mature rift zones), despite any asymmetry and repetition, are characterized by the same features as the eruptive fissures, the only difference lying in the larger size (higher fault throws, up to 40 m, and wider deformation zones). Analogue and numerical models of dike intrusion confirm that all the structural features observed along the rift segments may be dike-induced; these features include downward propagating normal faults bordering graben structures, contraction at the base of the hanging walls of the faults and upward propagating faults. Simple calculations based on the deeper structure of the eroded rift segments in eastern and western Iceland also suggest that all the fault slip in the active rift segments may result from diking. These results suggest that the overall deformation pattern of eruptive fissures and rift segments may be explained only by dike emplacement. In a magmatic rift, the regional tectonic stress may rarely be high enough to be

Scattering of electromagnetic plane waves by a buried vertical dike

Directory of Open Access Journals (Sweden)

Batista Lurimar S.

2003-01-01

Full Text Available The complete and exact solution of the scattering of a TE mode frequency domain electromagnetic plane wave by a vertical dike under a conductive overburden has been established. An integral representation composed of one-sided Fourier transforms describes the scattered electric field components in each one of the five media: air, overburden, dike, and the country rocks on both sides of the dike. The determination of the terms of the series that represents the spectral components of the Fourier integrals requires the numerical inversion of a sparse matrix, and the method of successive approaches. The zero-order term of the series representation for the spectral components of the overburden, for given values of the electrical and geometrical parameters of the model, has been computed. This result allowed to determine an approximate value of the variation of the electric field on the top of the overburden in the direction perpendicular to the strike of the dike. The results demonstrate the efficiency of this forward electromagnetic modeling, and are fundamental for the interpretation of VLF and Magnetotelluric data.

Highly refractory Archaean peridotite cumulates: Petrology and geochemistry of the Seqi Ultramafic Complex, SW Greenland

Directory of Open Access Journals (Sweden)

Kristoffer Szilas

2018-05-01

Full Text Available This paper investigates the petrogenesis of the Seqi Ultramafic Complex, which covers a total area of approximately 0.5 km2. The ultramafic rocks are hosted by tonalitic orthogneiss of the ca. 3000 Ma Akia terrane with crosscutting granitoid sheets providing an absolute minimum age of 2978 ± 8 Ma for the Seqi Ultramafic Complex. The Seqi rocks represent a broad range of olivine-dominated plutonic rocks with varying modal amounts of chromite, orthopyroxene and amphibole, i.e. various types of dunite (s.s., peridotite (s.l., as well as chromitite. The Seqi Ultramafic Complex is characterised primarily by refractory dunite, with highly forsteritic olivine with core compositions having Mg# ranging from about 91 to 93. The overall high modal contents, as well as the specific compositions, of chromite rule out that these rocks represent a fragment of Earth's mantle. The occurrence of stratiform chromitite bands in peridotite, thin chromite layers in dunite and poikilitic orthopyroxene in peridotite instead supports the interpretation that the Seqi Ultramafic Complex represents the remnant of a fragmented layered complex or a magma conduit, which was subsequently broken up and entrained during the formation of the regional continental crust.Integrating all of the characteristics of the Seqi Ultramafic Complex points to formation of these highly refractory peridotites from an extremely magnesian (Mg# ∼ 80, near-anhydrous magma, as olivine-dominated cumulates with high modal contents of chromite. It is noted that the Seqi cumulates were derived from a mantle source by extreme degrees of partial melting (>40%. This mantle source could potentially represent the precursor for the sub-continental lithospheric mantle (SCLM in this region, which has previously been shown to be ultra-depleted. The Seqi Ultramafic Complex, as well as similar peridotite bodies in the Fiskefjord region, may thus constitute the earliest cumulates that formed during the

Reliability analysis of the Red River dikes system in Viet Nam

NARCIS (Netherlands)

Pham Quang, T.

2014-01-01

This dissertation presents the applications of probabilistic-based frameworks in geotechnical and hydraulic engineering, for the assessment of the Red River dikes in Viet Nam. Dike along rivers often spread over the deltaic environment and its earthen structures are parts of a long civilian history,

Wind turbines and dike safety : Influence of time dependant loads and focus on long term behavior

NARCIS (Netherlands)

Holscher, P.; Kothuis, Baukje; Kok, Matthijs

2017-01-01

Dikes are attractive locations to construct wind turbines. Wind turbines can accentuate the dike as a linear element in the landscape. Dikes are often windy spots, that are accessible for construction and maintenance using the existing work road along the dike. With

Dike intrusions during rifting episodes obey scaling relationships similar to earthquakes

Science.gov (United States)

L., Passarelli; E., Rivalta; A., Shuler

2014-01-01

As continental rifts evolve towards mid-ocean ridges, strain is accommodated by repeated episodes of faulting and magmatism. Discrete rifting episodes have been observed along two subaerial divergent plate boundaries, the Krafla segment of the Northern Volcanic Rift Zone in Iceland and the Manda-Hararo segment of the Red Sea Rift in Ethiopia. In both cases, the initial and largest dike intrusion was followed by a series of smaller intrusions. By performing a statistical analysis of these rifting episodes, we demonstrate that dike intrusions obey scaling relationships similar to earthquakes. We find that the dimensions of dike intrusions obey a power law analogous to the Gutenberg-Richter relation, and the long-term release of geodetic moment is governed by a relationship consistent with the Omori law. Due to the effects of magma supply, the timing of secondary dike intrusions differs from that of the aftershocks. This work provides evidence of self-similarity in the rifting process. PMID:24469260

Comparison of microbial communities associated with three Atlantic ultramafic hydrothermal systems.

Science.gov (United States)

Roussel, Erwan G; Konn, Cécile; Charlou, Jean-Luc; Donval, Jean-Pierre; Fouquet, Yves; Querellou, Joël; Prieur, Daniel; Bonavita, Marie-Anne Cambon

2011-09-01

The distribution of Archaea and methanogenic, methanotrophic and sulfate-reducing communities in three Atlantic ultramafic-hosted hydrothermal systems (Rainbow, Ashadze, Lost City) was compared using 16S rRNA gene and functional gene (mcrA, pmoA and dsrA) clone libraries. The overall archaeal community was diverse and heterogeneously distributed between the hydrothermal sites and the types of samples analyzed (seawater, hydrothermal fluid, chimney and sediment). The Lost City hydrothermal field, characterized by high alkaline warm fluids (pH>11; Tphylum and Methanopyrales order were also retrieved from the Rainbow and Ashadze hydrothermal fluids. However, the methanogenic Methanococcales was the most widely distributed hyper/thermophilic archaeal group among the hot and acidic ultramafic-hosted hydrothermal system environments. Most of the lineages detected are linked to methane and hydrogen cycling, suggesting that in ultramafic-hosted hydrothermal systems, large methanogenic and methanotrophic communities could be fuelled by hydrothermal fluids highly enriched in methane and hydrogen. © 2011 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

Impact of lime treated soils performance on design of earthfill dikes

Directory of Open Access Journals (Sweden)

Nerincx Nicolas

2016-01-01

Full Text Available Nowadays soil treatment with lime in civil engineering is widespread in many countries on all continents, within several construction fields. The interest of the hydraulic works community regarding this technique is currently growing. It has been indeed shown during the last decade that appropriate treatment technologies provide lime treated soils with high level properties such as excellent homogeneity, low permeability, internal and external erosion resistance and mechanical stability. Those have been shown in laboratory and for some properties with full scale experiments. The so conferred soil properties can lead to innovative earthfill dams and dikes designs by addressing some of the typical designer’s problems, such as stability, watertightness, internal erosion, surface protection and flood control. However, lime treated soil external erosion resistance is still to be quantified in the field for proper designing and dimensioning of lime treated soil external erosion protection or spillways. With this purpose, an experimental earthfill dike has been built along the river Vidourle (France in July 2015, in the frame of the French R&D program “DigueELITE”. This 50 m long and 3,5 m high dike is made of lime treated silt and is provided with sensors (succion, water content and temperature and piezometer in order to be monitored. It will also be tested against surface erosion. The final objective of this R&D program is to provide guidelines for designing innovative overflow resistant earthfill dikes. This article describes the performance reached by lime treated soils and associated design requirements and application; the experimental dike construction and lessons learned; the monitoring program; the dike design perspectives opened by soil treatment.

Evaluation of Major Dike-Impounded Ground-Water Reservoirs, Island of Oahu

Science.gov (United States)

Takasaki, Kiyoshi J.; Mink, John Francis

1985-01-01

Ground-water reservoirs impounded by volcanic dikes receive a substantial part of the total recharge to ground water on the island of Oahu because they generally underlie the rainiest areas. These reservoirs accumulate the infiltration from rainfall, store it temporarily, and steadily leak it to abutting basal reservoirs or to streams cutting into them. The dike reservoirs have high hydraulic heads and are mostly isolated from saline water. The most important and productive of the dike-impounded reservoirs are in an area of about 135 square miles in the main fissure zone of the Koolau volcano where the top of the dike-impounded water reaches an altitude of at least 1,000 feet. Water is impounded and stored both above and below sea level. The water stored above sea level in the 135 square mile area has been roughly estimated at 560 billion gallons. In comparison, the water stored above sea level in reservoirs underlying a dike-intruded area of about 53 square miles in the Waianae Range has been roughly estimated at 100 billion gallons. Storage below sea level is indeterminable, owing to uncertainties about the ability of the rock to store water as dike density increases and porosity decreases. Tunnels, by breaching dike controls, have reduced the water stored above sea level by at least 50 billion gallons in the Koolau Range and by 5 1/2 billion gallons in the Waianae Range, only a small part of the total water stored. Total leakage from storage in the Koolau Range has been estimated at about 280 Mgal/d (million gallons per day). This estimated leakage from the dike-impounded reservoirs makes up a significant part of the ground-water yield of the Koolau Range, which has been estimated to range from 450 to 580 Mgal/d. The largest unused surface leakage is in the Kaneohe, Kahana, and Punaluu areas, and the largest unused underflow occurs in the Waialee, Hauula-Laie, Punaluu, and Kahana areas. The unused underflow leakage is small in areas near and east of Waialae, but

A laser profilometry technique for monitoring fluvial dike breaching in laboratory experiments

Science.gov (United States)

Dewals, Benjamin; Rifai, Ismail; Erpicum, Sébastien; Archambeau, Pierre; Violeau, Damien; Pirotton, Michel; El kadi Abderrezzak, Kamal

2017-04-01

A challenging aspect for experimental modelling of fluvial dike breaching is the continuous monitoring of the transient breach geometry. In dam breaching cases induced by flow overtopping over the whole breach crest (plane erosion), a side view through a glass wall is sufficient to monitor the breach formation. This approach can be extended for 3D dam breach tests (spatial erosion) if the glass wall is located along the breach centreline. In contrast, using a side view does not apply for monitoring fluvial dike breaching, because the breach is not symmetric in this case. We present a non-intrusive, high resolution technique to record the breach development in experimental models of fluvial dikes by means of a laser profilometry (Rifai et al. 2016). Most methods used for monitoring dam and dike breaching involve the projection of a pattern (fringes, grid) on the dam or dike body and the analysis of its deformation on images recorded during the breaching (e.g., Pickert et al. 2011, Frank and Hager 2014). A major limitation of these methods stems from reflection on the water surface, particularly in the vicinity of the breach where the free surface is irregular and rippled. This issue was addressed by Spinewine et al. (2004), who used a single laser sheet so that reflections on the water surface were strongly limited and did not hamper the accurate processing of each image. We have developed a similar laser profilometry technique tailored for laboratory experiments on fluvial dike breaching. The setup is simple and relatively low cost. It consists of a digital video camera (resolution of 1920 × 1080 pixels at 60 frames per second) and a swiping red diode 30 mW laser that enables the projection of a laser sheet over the dike body. The 2D image coordinates of each deformed laser profile incident on the dike are transformed into 3D object coordinates using the Direct Linear Transformation (DLT) algorithm. All 3D object coordinates computed over a swiping cycle of the

Distributed optical fiber-based monitoring approach of spatial seepage behavior in dike engineering

Science.gov (United States)

Su, Huaizhi; Ou, Bin; Yang, Lifu; Wen, Zhiping

2018-07-01

The failure caused by seepage is the most common one in dike engineering. As to the characteristics of seepage in dike, such as longitudinal extension engineering, the randomness, strong concealment and small initial quantity order, by means of distributed fiber temperature sensor system (DTS), adopting an improved optical fiber layer layout scheme, the location of initial interpolation point of the saturation line is obtained. With the barycentric Lagrange interpolation collocation method (BLICM), the infiltrated surface of dike full-section is generated. Combined with linear optical fiber monitoring seepage method, BLICM is applied in an engineering case, which shows that a real-time seepage monitoring technique is presented in full-section of dike based on the combination method.

How integrating 3D LiDAR data in the dike surveillance protocol: The French case

Science.gov (United States)

Bretar, F.; Mériaux, P.; Fauchard, C.

2012-04-01

The recent and dramatic floods of the last years in Europe (e.g. Rhône river major flood, December 2003, Windstorm Xynthia, February 2010, in France) and in the United-States (Hurricane Katrina, August 2005) showed the vulnerability of flood or coastal defence systems. The first key point for avoiding these dramatic damages and the high cost of a failure and its consequences lies in the appropriate conception and construction of the dikes, but above all in the relevance of the surveillance protocol. Many factors introduce weaknesses in the fluvial or maritime dikes. Most of them are old embankment structures. For instance, some of the French Loire River dikes were built several centuries ago. They may have been rebuilt, modified, heightened several times, with some materials that do not necessarily match the original conception of the structure. In other respects, tree roots or animal burrows could modify the structure of the dike and reduce the watertightness or mechanical properties. The French government has built a national database, "BarDigues", since 1999 to inventory and characterize dikes. Today, there are approx. 9000 km of dikes protecting 1.5 to 2 millions of people. In the meantime, a GIS application, called « Dike SIRS » [Maurel P., 2004] , provides an operational and accurate tool to several great stakeholders in charge of managing more than 100 km of dikes. Today, the dike surveillance and diagnosis protocol consists in identifying the weaknesses of the structure and providing the degree of safety by making a preliminary study (historical research, geological and morphodynamic study, topography), geophysical study (e.g. electromagnetic methods and electrical resistivity tomography) and at last geotechnical study (e.g. drillings and stability modelling) at the very local scale when necessary [Mériaux P. & Royet P, 2007] . Considering the stretch of hundreds of kilometres, rapid, cost-effective and reliable techniques for surveying the dike must be

Petrogenesis of the Alaskan-type mafic-ultramafic complex in the Makkah quadrangle, western Arabian Shield, Saudi Arabia

Science.gov (United States)

Habtoor, Abdelmonem; Ahmed, Ahmed Hassan; Harbi, Hesham

2016-10-01

The Makkah quadrangle is a part of the Jeddah terrane in the Precambrian basement, Western Arabian Shield of Saudi Arabia. Gabal Taftafan mafic-ultramafic complex lies within the central part of the Makkah quadrangle. The Taftafan mafic-ultramafic complex is a well-differentiated rock association which comprises of dunite core, hornblende- and plagioclase-bearing peridotites, troctolite, clinopyroxenite and marginal gabbro, in a distinctive zonal structure. The bulk-rock geochemistry of the Taftafan mafic-ultramafic rocks is characterized by a tholeiitic/sub-alkaline affinity with high Mg in the ultramafic core (0.84) and is systematically decreased towards the marginal gabbro (0.60). The patterns of trace elements show enrichment in the fluid-mobile elements (Sr, Ba) and a pronounced negative Nb anomaly which reflect a hydrous parental magma generated in a subduction tectonic setting. The mafic-ultramafic rocks of the Taftafan complex have low total rare earth elements (REE) displaying sub-parallel patterns leading to the assumption that these rocks are comagmatic and are formed by fractional crystallization from a common magma type. The platinum-group elements (PGE) content of all rock types in the Taftafan complex is very low, with ∑ PPGE > ∑ IPGE; displaying slightly positive slopes of the PGE distribution patterns. The chemistry of ferromagnesian minerals is characterized by a high forsterite (Fo) olivine with wide range (Fo91-67), from ultramafic core to the marginal gabbro, Ca-rich diopsidic clinopyroxene, and calcic hornblende. Orthopyroxene is almost absent from all rock types, or very rare when present. Hornblende and Ca-plagioclase possess the longest crystallization history since they are present in almost all rock types of the complex. Spinels in the dunite and hornblende-bearing peridotite core show homogeneous composition with intermediate Cr# (0.53-0.67). Plagioclase-bearing peridotite and troctolite have two exsolved types of spinel; Al

Structure - Riverine Flow Structure (Dike/Wingdam)

Data.gov (United States)

Army Corps of Engineers, Department of the Army, Department of Defense — A natural or man-made flow (or sediment) control structure in a water course or water body such as a dike or weir. This feature should not be used to model a levee....

Structural control on basaltic dike and sill emplacement, Paiute Ridge mafic intrusion complex, southern Nevada

International Nuclear Information System (INIS)

Carter Krogh, K.E.; Valentine, G.A.

1996-08-01

Late Miocene basaltic sills and dikes in the Paiute Ridge area of southern nevada show evidence that their emplacement was structurally controlled. Basaltic dikes in this area formed by dilating pre-existing vertical to steeply E-dipping normal faults. Magma propagation along these faults must have required less energy than the creation of a self-propagated fracture at dike tips and the magma pressure must have been greater than the compressive stress perpendicular to the fault surface. N- to NE-trending en echelon dikes formed locally and are not obviously attached to the three main dikes in the area. The en echelon segments are probably pieces of deeper dikes, which are segmented perhaps as a result of a documented rotation of the regional stresses. Alternatively, changes in orientation of principal stresses in the vicinity of each en echelon dike could have resulted from local loads associated with paleotopographic highs or nearby structures. Sills locally branched off some dikes within 300 m of the paleosurface. These subhorizontal bodies occur consistently in the hanging wall block of the dike-injected faults, and intrude Tertiary tuffs near the Paleozoic-Tertiary contact. The authors suggest that the change in stresses near the earth's surface, the material strength of the tuff and paleozoic rocks, and the Paleozoic bedding dip direction probably controlled the location of sill formation and direction of sill propagation. The two largest sills deflected the overlying tuffs to form lopoliths, indicating that the magma pressure exceeded vertical stresses at that location and that the shallow level and large size of the sills allowed interaction with the free (earth's) surface. 32 refs., 4 figs., 1 tab

Southern African Phanerozoic Carbonatites: Perspectives on Their Sources and Petrogeneses

Science.gov (United States)

Janney, P. E.; Ogungbuyi, P. I.; Marageni, M.; Harris, C.; Reid, D. L.

2017-12-01

Found worldwide, carbonatites are particularly numerous in southern Africa and reflect one expression of abundant intraplate alkaline magmatism of Proterozoic to Paleogene age in the region. Phanerozoic southern African carbonatites tend to be concentrated near the margins of the continent (especially the western margin), and near the East African Rift, and often occur in discrete magmatic lineations also containing kimberlites, melilitites, nephelinites and differentiated silica-undersaturated rocks such as phonolites and syenites. We present a synthesis of geochemical and radiogenic and stable isotope results for southern African carbonatites, including new trace element and isotope data from four Phanerozoic carbonatite complexes in South Africa and Namibia: Marinkas Quellen (MQ; southernmost Namibia, ≈525 Ma), Saltpeterkop (SPK; near Sutherland, South Africa, 74 Ma), Zandkopsdrift (ZKD; near Garies, South Africa, 55 Ma, a major REE deposit in development), and Dicker Willem (DW; near Aus, southern Namibia, 49 Ma). All are located in the Early-mid Proterozoic Namaqua-Natal mobile belt. These carbonatite complexes are each associated with linear, NE-SW oriented magmatic provinces, i.e., the Kuboos-Bremen Line of felsic alkaline intrusions and ultramafic lamprophyres (MQ); the Western Cape olivine melilitite province (SPK); the Namaqualand-Bushmanland-Warmbad province of olivine melilitites and kimberlites (ZKD) and the Schwarzeberg-Klinghardt-Gibeon swarm of nephelinites, phonolites and kimberlites (DW), the latter three provinces are of Paleogene to Late Cretaceous age and are clearly age progressive. Each of the four carbonatite complexes contain silica-undersaturated igneous rocks such as potassic trachyte (MQ, SPK & DW), alkaline lamprophyre (ZKD), ijolite (MQ & DW) and olivine melilitite (ZKD and SPK). Most also contain hybrid silicate-carbonate igneous rocks with <35 wt.% SiO2 and ≥20 wt.% CO2 such as nepheline sövite (DW), aillikite (ZKD) and other

Hydrogeochemistry of deep groundwaters of mafic and ultramafic rocks in Finland

International Nuclear Information System (INIS)

Ruskeeniemi, T.; Blomqvist, R.; Lindberg, A.; Ahonen, L.; Frape, S.

1996-12-01

The present work reports and interprets the hydrogeochemical and hydrogeological data obtained from deep groundwaters in various mafic-ultramafic formations in Finland. The work is mainly based on the results of the research project 'Geochemistry of deep groundwaters' financed by the Ministry of Trade and Industry and the Geological Survey of Finland. Five sites were selected for this study: (1) Juuka, (2) Keminmaa, (3) Maentsaelae, (4) Ranua, and (5) Ylivieska. Keminmaa and Ranua are located in Early Proterozoic layered intrusions dated at 2.44 Ga. The Juuka site lies within the massive Miihkali serpentinite, which is thought to represent the ultramafic part of a Proterozoic (1.97 Ga) ophiolite complex. The Maentsaelae gabbro represents the deep parts of the Svecofennian volcanic sequence, while the Ylivieska mafic-ultramafic intrusion is one of a group of Svecokarelian Ni-potential intrusions 1.9 Ga in age. For reference, groundwaters from four other sites are also briefly described. Three of these sites are located within the nickel mining regions of Enonkoski, Kotalahti and Vammala, while the fourth is a small Ni mineralization at Hyvelae, Noormarkku. The four reference sites are all of Svecokarelian age. (refs.)

Hydrogeochemistry of deep groundwaters of mafic and ultramafic rocks in Finland

Energy Technology Data Exchange (ETDEWEB)

Ruskeeniemi, T.; Blomqvist, R.; Lindberg, A.; Ahonen, L. [Geological Survey of Finland, Espoo (Finland); Frape, S. [Waterloo Univ., ON (Canada)

1996-12-01

The present work reports and interprets the hydrogeochemical and hydrogeological data obtained from deep groundwaters in various mafic-ultramafic formations in Finland. The work is mainly based on the results of the research project `Geochemistry of deep groundwaters` financed by the Ministry of Trade and Industry and the Geological Survey of Finland. Five sites were selected for this study: (1) Juuka, (2) Keminmaa, (3) Maentsaelae, (4) Ranua, and (5) Ylivieska. Keminmaa and Ranua are located in Early Proterozoic layered intrusions dated at 2.44 Ga. The Juuka site lies within the massive Miihkali serpentinite, which is thought to represent the ultramafic part of a Proterozoic (1.97 Ga) ophiolite complex. The Maentsaelae gabbro represents the deep parts of the Svecofennian volcanic sequence, while the Ylivieska mafic-ultramafic intrusion is one of a group of Svecokarelian Ni-potential intrusions 1.9 Ga in age. For reference, groundwaters from four other sites are also briefly described. Three of these sites are located within the nickel mining regions of Enonkoski, Kotalahti and Vammala, while the fourth is a small Ni mineralization at Hyvelae, Noormarkku. The four reference sites are all of Svecokarelian age. (refs.).

Experiments and Numerical Simulations of Dike Erosion due to a Wave Impact

Directory of Open Access Journals (Sweden)

Stefania Evangelista

2015-10-01

Full Text Available Dike erosion is a crucial issue in coastal and fluvial flood risk management. These defense structures appear vulnerable to extreme hydrological events, whose potential occurrence risk seems to be recently increased due to climate change. Their design and reinforcement is, however, a complex task, and although numerical models are very powerful nowadays, real processes cannot be accurately predicted; therefore, physical models constitute a useful tool to investigate different features under controlled conditions. This paper presents some laboratory experimental results of erosion of a sand dike produced by the impact of a dam break wave. Experiments have been conducted in the Water Engineering Laboratory at the University of Cassino and Southern Lazio, Italy, in a rectangular channel: here, the sudden opening of a gate forming the reservoir generates the wave impacting the dike, made in turn of two different, almost uniform sands. The physical evidence proves that the erosion process is strongly unsteady and significantly different from a gradual overtopping and highlights the importance of apparent cohesion for the fine sand dike. The experimental results have also been compared against the ones obtained through the numerical integration of a two-phase model, which shows the reasonable predictive capability of the temporal free surface and dike profile evolution.

Linking geology, fluid chemistry, and microbial activity of basalt- and ultramafic-hosted deep-sea hydrothermal vent environments.

Science.gov (United States)

Perner, M; Hansen, M; Seifert, R; Strauss, H; Koschinsky, A; Petersen, S

2013-07-01

Hydrothermal fluids passing through basaltic rocks along mid-ocean ridges are known to be enriched in sulfide, while those circulating through ultramafic mantle rocks are typically elevated in hydrogen. Therefore, it has been estimated that the maximum energy in basalt-hosted systems is available through sulfide oxidation and in ultramafic-hosted systems through hydrogen oxidation. Furthermore, thermodynamic models suggest that the greatest biomass potential arises from sulfide oxidation in basalt-hosted and from hydrogen oxidation in ultramafic-hosted systems. We tested these predictions by measuring biological sulfide and hydrogen removal and subsequent autotrophic CO2 fixation in chemically distinct hydrothermal fluids from basalt-hosted and ultramafic-hosted vents. We found a large potential of microbial hydrogen oxidation in naturally hydrogen-rich (ultramafic-hosted) but also in naturally hydrogen-poor (basalt-hosted) hydrothermal fluids. Moreover, hydrogen oxidation-based primary production proved to be highly attractive under our incubation conditions regardless whether hydrothermal fluids from ultramafic-hosted or basalt-hosted sites were used. Site-specific hydrogen and sulfide availability alone did not appear to determine whether hydrogen or sulfide oxidation provides the energy for primary production by the free-living microbes in the tested hydrothermal fluids. This suggests that more complex features (e.g., a combination of oxygen, temperature, biological interactions) may play a role for determining which energy source is preferably used in chemically distinct hydrothermal vent biotopes. © 2013 John Wiley & Sons Ltd.

A Plastic Flow and Rheomorfic Differentiation of the Mantle Ultramafic Rocks

Directory of Open Access Journals (Sweden)

D. E. Saveliev

2014-12-01

Full Text Available In this paper, the general characteristics of morphological features of the ophiolitic ultramafic rock formations are discussed. The ultramafic rocks are the fragments of upper mantle, which were exposed on the surface due to tectonic events. It is shown that their main chemical and structural characteristic is a stratification accompanied by separation of the rheologically weakest dunite bodies usually containing the economic amount of chromite ore. Based on results of conducted analysis, we propose a new hypothesis of petro- and ore genesis in the upper mantle. Using the thermodynamic approach, we developed the rheomorfic model of the differentiation of the mantle matter. This model solves many problems inherent to currently used magmatic or metasomatic models.

Adapting to climate change: a comparison of two strategies for dike heightening

NARCIS (Netherlands)

Hoekstra, Arjen Ysbert; de Kok, Jean-Luc

2008-01-01

In the Netherlands the current dike design policy is to design flood defence structures corresponding to an agreed flooding probability with an extra safety board of at least 0.5 m. For river dikes a return period of 1,250 years is used to determine the design water levels. A problem with this

A Fragment of Ophiolite Assemblage of Kasargi Lake Area: East-Urals Megazone, Northern Part of the Southern Urals

Directory of Open Access Journals (Sweden)

D. E. Saveliev

2014-03-01

Full Text Available The results of study of rocks of ophiolite assemblage exposed on the east coast of Kasargi Lake are presented. The ophiolite assemblage is formed with the serpentinised ultramafic rocks of dunite-harzburgite association, which are residual and the shlirenbanded gabbros with a number of later dikes of diabases and porphiritic gabbros. The chemical content of mafic and ultramafic rocks of Kasargi massif shows that they are likely the equivalent rocks encountered within the backarc spreading ridges.

Buffered and unbuffered dike emplacement on Earth and Venus - Implications for magma reservoir size, depth, and rate of magma replenishment

Science.gov (United States)

Parfitt, E. A.; Head, J. W., III

1993-01-01

Models of the emplacement of lateral dikes from magma chambers under constant (buffered) driving pressure conditions and declining (unbuffered) driving pressure conditions indicate that the two pressure scenarios lead to distinctly different styles of dike emplacement. In the unbuffered case, the lengths and widths of laterally emplaced dikes will be severely limited and the dike lengths will be highly dependent on chamber size; this dependence suggests that average dike length can be used to infer the dimensions of the source magma reservoir. On Earth, the characteristics of many mafic-dike swarms suggest that they were emplaced in buffered conditions (e.g., the Mackenzie dike swarm in Canada and some dikes within the Scottish Tertiary). On Venus, the distinctive radial fractures and graben surrounding circular to oval features and edifices on many size scales and extending for hundreds to over a thousand km are candidates for dike emplacement in buffered conditions.

Investigation of hydrodynamics on local scour by shape of single spur dike in river bend

International Nuclear Information System (INIS)

Masjedi, A; Foroushani, E P

2012-01-01

A series of experiments were conducted in which the the scour hole associated with model spur dike was measured in a 180 degree laboratory flume bend under clear-water overtopping flows. In this study, the local scour were conducted for three different shapes of oblong, rectangulat chamfered of straight spur dikes at the bend with various Froude number. The main goals of the experiments were to evaluate the effect of the three different shapes of straight spur dikes on the volume of scour and potential aquatic habitat and on minimizing erosion adjacent to the streambanks. The experiments showed that of the three different shapes of straight spur dikes tested, the least erosion of the around in the near bank region was associated with the spur dikes with oblong shape, while the greatest volume of the scour hole was associated with the rectangular shape. So it was observed that, as Froude number increases, the scour increases.

The basic and ultrabasic dikes from the coast region between the Sao Sebastiao and Ubatuba cities, Sao Paulo State, SP, Brazil

International Nuclear Information System (INIS)

Garda, Gianna Maria

1995-01-01

The coastline between Sao Sebastiao and Ubatuba cities and the shores of Sao Sebastiao, Anchieta and Mar Virado islands (Sao Paulo State, Brazil) are crosscut by several small swarms and isolated dykes trending N55E. The main rock types range from basic to intermediate, but also a conspicuous variety of alkaline lamprophyres occur side by side with the main group. The thickness of the basic to intermediate dykes vary widely, from a few centimeters to several metres, while the lamprophyres are a few tens of centimeters thick. The objective of this thesis is the petrographic, mineralogic, petrochemical and isotopic characterization of the basic and ultrabasic dykes that occur between the Sao Sebastiao and Ubatuba cities (State of Sao Paulo), also including some occurrences from the Sao Sebastiao, Mar Virado and Anchieta islands and from the Bairro Alto region (Folha de Natividade da Serra). The petrogenetic model presented is based in the national and international bibliography. (author)

Petrogenesis and geochemical characterisation of ultramafic cumulate rocks from Hawes Head, Fiordland, New Zealand

International Nuclear Information System (INIS)

Daczko, N.R.; Emami, S.; Allibone, A.H.; Turnbull, I.M.

2012-01-01

Early Cretaceous parts of the western Median Batholith (Western Fiordland Orthogneiss) represent the exposed root of a magmatic arc of dioritic to monzodioritic composition (SiO 2 = 51-55 wt%; Na 2 O/K 2 O = 3.7-8.8 in this study). We characterise for the first time the field relationships, petrography, mineralogy and geochemistry of ultramafic and mafic cumulates at Hawes Head, the largest exposure of ultramafic rocks in western Fiordland. We distinguish three related rock types at Hawes Head: hornblende peridotite (MgO = 21-35 wt%); hornblendite (MgO = 15-16 wt%); and pyroxenite (MgO = 21 wt%). Petrogenetic relationships between the ultramafic rocks and the surrounding Misty Pluton of the Western Fiordland Orthogneiss are demonstrated by: (i) mutually cross-cutting relationships; (ii) similar mafic phases (e.g. pyroxene and amphibole) with elevated Mg-numbers (e.g. olivine Mg/(Mg+Fe) = 0.77-0.82); (iii) fractionation trends in mineral geochemistry; and (iv) shared depleted heavy rare earth element patterns. In addition, the application of solid/liquid partition coefficients indicates that olivine in the ultramafic rocks at Hawes Head crystallised from a magma with Mg/(Mg+Fe) = 0.54-0.57. The olivine grains therefore represent a plausible early crystallising phase of the adjacent Western Fiordland Orthogneiss (Mg/(Mg+Fe) = 0.51-0.55). (author). 42 refs., 5 figs., 1 tab.

Influence of Clastic Dikes on Vertical Migration of Contaminants in the Vadose Zonde at Hanford

International Nuclear Information System (INIS)

Murray, Christopher J.; Ward, Anderson L.; Wilson, John L.

2004-01-01

The purpose of this study was to examine the hypothesis that clastic dikes could form a preferential flow path through the vadose zone to the water table at the Hanford Site. Clastic dikes are subvertical structures that form within sedimentary sequences after deposition and cut across the original sedimentary layers. They are common throughout the Hanford Site, often occurring in organized polygonal networks. In the initial phase of the project, we analyzed the large-scale geometry of the clastic dikes and developed an algorithm for simulating their spatial distribution. This result will be useful in providing maps of the potential distribution of clastic dikes in areas where they are not exposed at the surface (e.g., where covered by windblown sand or construction of facilities like tank farms at the surface). In addition to the study of the large-scale distribution of the dikes, a major focus of the project was on field, laboratory, and modeling studies of the hydrogeological properties of the clastic dikes and the effect that they have on transport of water through the vadose zone. These studies were performed at two field locations at the Hanford Site. We performed an extensive series of field and laboratory measurements of a large number of samples from the clastic dikes, linked with infrared (IR) and visual imagery of the clastic dikes and surrounding matrix. We developed a series of correlations from the sample data that allowed us to estimate the unsaturated hydraulic conductivity of the dike and matrix at an extremely high resolution (approximately 1 mm). The resulting grids, each of which measured several meters on a side and included nearly four million grid nodes, were used to study the distribution of moisture between the clastic dike and surrounding matrix, as well as the relative velocities that moisture would have through the clastic dike and matrix for a number of different recharge scenarios. Results show the development of complex flow networks

Pandora and Dike in Hesiod’s Works and days

Directory of Open Access Journals (Sweden)

Katherine Olstein

1980-12-01

Full Text Available Pandora and Dike are negative and positive analogues integral as such to the most important themes of the poem. Pandora's myth explains why strife is deadly and must be rejected for accumulating Bios on the land. As punishment for Prometheus' attempts to trick Zeus, Pandora and her descendants eternally trick men who also cheat each other, neglecting productive work. The evils from Pandora's jar and the several ages of unjust men destroyed by Zeus represent respectively individual and generational mortality. Nevertheless, through Dike —harmonious work and Bios attained in the Just City, a new Golden Age— men may hope to recapture their immortality.

K-Ar geology, geochemistry and geochronology from the Maria River region dikes, Parana State southeastern part, Brazil

International Nuclear Information System (INIS)

Silva Junior, Renato Oliveira da; Dall'Agnol, Roberto; Oliveira, Elson Paiva de

1996-01-01

The paper synthesizes the geological, petrographical, geochemical and geochronological data from the Maria River region dikes, situated at the southeastern part of the Para State, Brazil. It identifies five groups of dikes and determines the age of these dikes, through the Potassium-Argon (K-Ar) methodology

Sr and Nd isotope composition of the metamorphic, sedimentary and ultramafic xenoliths of Lanzarote (Canary Islands): Implications for magma sources

Science.gov (United States)

Aparicio, Alfredo; Tassinari, Colombo C. G.; García, Roberto; Araña, Vicente

2010-01-01

The lavas produced by the Timanfaya eruption of 1730-1736 (Lanzarote, Canary Islands) contain a great many sedimentary and metamorphic (metasedimentary), and mafic and ultramafic plutonic xenoliths. Among the metamorphosed carbonate rocks (calc-silicate rocks [CSRs]) are monomineral rocks with forsterite or wollastonite, as well as rocks containing olivine ± orthopyroxene ± clinopyroxene ± plagioclase; their mineralogical compositions are identical to those of the mafic (gabbros) and ultramafic (dunite, wherlite and lherzolite) xenoliths. The 87Sr/ 86Sr (around 0.703) and 143Nd/ 144Nd (around 0.512) isotope ratios of the ultramafic and metasedimentary xenoliths are similar, while the 147Sm/ 144Nd ratios show crustal values (0.13-0.16) in the ultramafic xenoliths and mantle values (0.18-0.25) in some CSRs. The apparent isotopic anomaly of the metamorphic xenoliths can be explained in terms of the heat source (basaltic intrusion) inducing strong isotopic exchange ( 87Sr/ 86Sr and 143Nd/ 144Nd) between metasedimentary and basaltic rocks. Petrofabric analysis also showed a possible relationship between the ultramafic and metamorphic xenoliths.

Preliminary investigations on the carbon dioxide sequestering potential of the ultramafic rock

Energy Technology Data Exchange (ETDEWEB)

Goff, F.; Guthrie, G.; Counce, D.; Kluk, E.; Bergfeld, D.; Snow, M.

1997-08-01

Fossil fuels continue to provide major sources of energy to the modern world even though global emissions of CO{sub 2} are presently at levels of 19 Gt/yr. Future antipollution measures may include sequestering of waste CO{sub 2} as magnesite (MgCO{sub 3}) by processing ultramafic rocks to obtain reactable Mg. Huge ultramafic deposits consisting of relatively pure Mg-rich silicates exist throughout much of the world in ophiolites and layered intrusions. Peridotites (especially dunites) and serpentinites comprise the best ores because they contain the most Mg by weight and are relatively reactive to hot acids such as HCl. Although mining such deposits on a large scale would have environmental impacts, the sequestering process could provide Cr, Ni, and other metals as byproducts and could dispose of existing waste (white) asbestos. Small ultramafic bodies ({approximately} 1 km{sup 3}) can potentially sequester about 1 Gt of CO{sub 2} or about 20% of annual US emissions. A single large deposit of dunite ({approximately} 30 km{sup 3}) could dispose of about 20 yr of current US CO{sub 2} emissions. The cost and environmental impact of mining these deposits must be weighed against the increased costs of energy and benefits to the atmosphere and climate.

Geothermobarometry for ultramafic assemblages from the Emeishan Large Igneous Province, Southwest China and the Nikos and Zulu Kimberlites, Nunavut, Canada

Science.gov (United States)

Zhao, D.

2009-05-01

To understand and contrast the origins of ultramafic assemblages from basaltic and kimberlitic rocks and their associated deposits, such as V-Ti magnetite and Ni-Cu-(PGE) sulfide deposits and diamond, applicable thermobarometers were evaluated and applied to the ultramafic assemblages from the Emeishan Large Igneous Province (ELIP), Southwest China and from the Nikos and Zulu Kimberlites of Nunavut, Canada. The ELIP is located in the Yangtze Block, Southwest China and composed of Permian Emeishan Flood basalt (EFB) and associated layered mafic-ultramafic intrusions. Some of these intrusions host V-Ti magnetite deposits; while others contain Ni-Cu-(PGE) sulfide deposits. It is not clear why some intrusions host magnetite deposits and others contain sulfide deposits. The P-T conditions for the ultramafic assemblages from the mafic-ultramafic intrusions in the ELIP were calculated in order to understand the origins and the associated mineral deposits. The ultramafic assemblages are peridotite, olivine pyroxenite, pyroxenite in the layered intrusions and the common minerals include spinel, olivine, clinopyroxene, orthopyroxene, and minor magnetite and ilmenite. Using a two pyroxene thermometer and a Ca-Mg exchange barometer between olivine and clinopyroxene, a spinel-olivine-clinopyroxene-orthopyroxene assemblage from the Xinjie intrusion yields a T-P of 905°C and 17 kbar; and a similar assemblage from the Jinbaoshan intrusion yields a T-P of 1124°C and 31 kbar. The Nikos kimberlite, near Elwin Bay on Somerset Island, is located at the northeast end of the northeast-southwest kimberlite zone; and the Zulu kimberlite is located on the neighboring Brodeur Peninsula of Baffin Island, Nunavut. The ultramafic assemblages from the Canadian Kimberlites include garnet lherzolite, garnet-spinel lherzolite, spinel lherzolite, dunite, garnet websterite, spinel websterite and garnet clinopyroxenite. The calculated P-T conditions are in the range of 760 to 1180°C and 25 to 60

Wind turbines along highways and on the dikes Houtribdijk and Afsluitdijk in the Netherlands

International Nuclear Information System (INIS)

Johanson, J.C.P.; Meesters, H.J.N.

1993-01-01

Attention is paid to the safety, control and maintenance of dikes with regard to the placing of wind turbines on the dikes, as mentioned in the title. Also the possible damage to the bird population and the visual impact of wind turbines are dealt with. 5 refs

Geochemical constraints on sources of metabolic energy for chemolithoautotrophy in ultramafic-hosted deep-sea hydrothermal systems.

Science.gov (United States)

McCollom, Thomas M

2007-12-01

Numerical models are employed to investigate sources of chemical energy for autotrophic microbial metabolism that develop during mixing of oxidized seawater with strongly reduced fluids discharged from ultramafic-hosted hydrothermal systems on the seafloor. Hydrothermal fluids in these systems are highly enriched in H(2) and CH(4) as a result of alteration of ultramafic rocks (serpentinization) in the subsurface. Based on the availability of chemical energy sources, inferences are made about the likely metabolic diversity, relative abundance, and spatial distribution of microorganisms within ultramafic-hosted systems. Metabolic reactions involving H(2) and CH(4), particularly hydrogen oxidation, methanotrophy, sulfate reduction, and methanogenesis, represent the predominant sources of chemical energy during fluid mixing. Owing to chemical gradients that develop from fluid mixing, aerobic metabolisms are likely to predominate in low-temperature environments (energy per kilogram of hydrothermal fluid, while anaerobic metabolic reactions can supply about 1 kJ, which is sufficient to support a maximum of approximately 120 mg (dry weight) of primary biomass production by aerobic organisms and approximately 20-30 mg biomass by anaerobes. The results indicate that ultramafic-hosted systems are capable of supplying about twice as much chemical energy as analogous deep-sea hydrothermal systems hosted in basaltic rocks.

The Morphological Characteristics and Mechanical Formation of Giant Radial Dike Swarms on Venus: An Overview Emphasizing Recent Numerical Modeling Insights

Science.gov (United States)

McGovern, P. J., Jr.; Grosfils, E. B.; Le Corvec, N.; Ernst, R. E.; Galgana, G. A.

2017-12-01

Over 200 giant radial dike swarms have been identified on Venus using Magellan data, yielding insight into morphological characteristics long since erased by erosion and other processes on Earth. Since such radial dike systems are typically associated with magma reservoirs, large volcanoes and/or larger-scale plume activity—and because dike geometry reflects stress conditions at the time of intrusion—assessing giant radial dike formation in the context of swarm morphology can place important constraints upon this fundamental volcanotectonic process. Recent numerical models reveal that, contrary to what is reported in much of the published literature, it is not easy, mechanically, to produce either large or small radial dike systems. After extensive numerical examination of reservoir inflation, however, under conditions ranging from a simple halfspace to complex flexural loading, we have thus far identified four scenarios that produce radial dike systems. Two of these scenarios yield dike systems akin to those often associated with shield and stratocone volcanoes on Earth, while the other two, our focus here, are more consistent with the giant radial dike system geometries catalogued on Venus. In this presentation we will (a) review key morphological characteristics of the giant radial systems identified on Venus, (b) briefly illustrate why it is not easy, mechanically, to produce a radial dike system, (c) present the two volcanological circumstances we have identified that do allow a giant radial dike system to form, and (d) discuss current model limitations and potentially fruitful directions for future research.

Rock- and Paleomagnetic Properties and Modeling of a Deep Crustal Volcanic System, the Reinfjord Ultramafic Complex, Seiland Igneous Province, Northern Norway

Science.gov (United States)

ter Maat, G. W.; Pastore, Z.; Michels, A.; Church, N. S.; McEnroe, S. A.; Larsen, R. B.

2017-12-01

The Reinfjord Ultramafic Complex is part of the 5000 km2 Seiland Igneous Province (SIP) in Northern Norway. The SIP is argued to be the deep-seated conduit system of a Large Igneous Province and was emplaced at 25-35 km depth in less than 10 Ma (570-560 Ma). The Reinfjord Ultramafic Complex was emplaced during three major successive events at 22-28km depth at pressures of 6-8kb, with associated temperatures 1450-1500°C (Roberts, 2006). The rocks are divided into three formations: the central series (CS) consisting of mainly dunites, upper layered series (ULS) consisting of dunites and wehrlites, a lower layered series (LLS) containing most pyroxene-rich rocks and a marginal zone (MZ) which formed where the ultramafic melts intruded the gabbro-norite and metasedimentary gneisses. Deep exposures such as the Reinfjord Ultramafic Complex are rare, therefore this study gives a unique insight in the rock magnetic properties of a deep ultramafic system. Localised serpentinised zones provide an opportunity to observe the effect of this alteration process on the magnetic properties of deep-seated rocks. Here, we present the results from the rock magnetic properties, a paleomagnetic study and combined potential-fields modeling. The study of the rock magnetic properties provides insight in primary processes associated with the intrusion, and later serpentinization. The paleomagnetic data yields two distinct directions. One direction corresponds to a Laurentia pole at ≈ 532 Ma while the other, though younger, is not yet fully understood. Rock magnetic properties were measured on > 700 specimens and used to constrain the modelling of gravity, high-resolution helicopter, and ground magnetic data. The intrusion is modelled as a cylindrically shaped complex with a dunite core surrounded by wehrlite and gabbro. The ultramafic part of the complex dips to the NE and its maximum vertical extent is modelled to 1400m. Furthermore, modelling allows estimation of relative volumes of

Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes

Science.gov (United States)

Harp, A. G.; Valentine, G. A.

2018-02-01

Mafic flank eruptions are common events that pose a serious hazard to the communities and infrastructure often encroaching on the slopes of stratovolcanoes. Flank vent locations are dictated by the propagation path of their feeder dikes. The dikes are commonly thought to propagate either laterally from the central conduit or vertically from a deeper source. However, these interpretations are often based on indirect measurements, such as surface deformation and seismicity at active systems, and several studies at eroded volcanoes indicate the propagation paths may be more complex. We investigated the Oligocene age Summer Coon volcano (Colorado, USA), where erosion has exposed over 700 basaltic-andesitic radial dikes, to constrain the propagation directions, geometries, and spatial distributions of mafic dikes within a stratovolcano. The mean fabric angle of aligned plagioclase crystals was measured in oriented samples from the margins of 77 dikes. Of the 41 dikes with statistically significant flow fabrics, 85% had fabric angles that were inclined—plunging both inward and outward relative to the center of the volcano. After comparing fabric angles to those reported in other studies, we infer that, while most of the dikes with outward-plunging fabrics descended toward the flanks from a source within the edifice and near its axis, dikes with inward-plunging fabrics ascended through the edifice and toward the flanks from a deeper source. A possible control for the inclination of ascending dikes was the ratio between magma overpressure and the normal stress in the host rock. While higher ratios led to high-angle propagation, lower ratios resulted in inclined emplacement. Dikes crop out in higher frequencies within a zone surrounding the volcano axis at 2500 m radial distance from the center and may be the result of ascending dikes, emplaced at similar propagation angles, intersecting the current level of exposure at common distances from the volcano axis. The process

Rock mass joint treated by jet grouting at Diavik A418 dike south abutment

Energy Technology Data Exchange (ETDEWEB)

Baisre, C.A. [SNC-Lavalin, Montreal, PQ (Canada); Hatch Energy, Montreal, PQ (Canada)

2009-07-01

In order to exploit the diamond pipes at the Diavik mines, located in the Northwest Territories, two dikes were built into the Lac de Gras, dikes A154 and A418. However, during the construction of the curtain grouting of the A418 Dike, the pressure grouting technique did not achieve the desired closure of a subhorizontal joint located at variable depth beneath the dike foundation into the granite rock mass at the south abutment. The joint was filled mainly with silt, sand and gravel. This paper reviewed the problems with the pressure grouting treatment methodology, and the final decision of the designers and construction manager to treat the joint by jet grouting. The paper outlined pressure grouting, with particular reference to technical specifications; curtain grouting analysis; and joint grouting investigation. The joint treatment by jet grouting was described and the most important features of the core drilling after jetting were outlined. The permeability of the joint was reduced significantly in the treated area, according to observations made during jetting and in the recovered cores and the permeability tests. 1 tab., 7 figs.

Generation of Hydrogen and Methane during Experimental Low-Temperature Reaction of Ultramafic Rocks with Water

Science.gov (United States)

McCollom, Thomas M.; Donaldson, Christopher

2016-06-01

Serpentinization of ultramafic rocks is widely recognized as a source of molecular hydrogen (H2) and methane (CH4) to support microbial activity, but the extent and rates of formation of these compounds in low-temperature, near-surface environments are poorly understood. Laboratory experiments were conducted to examine the production of H2 and CH4 during low-temperature reaction of water with ultramafic rocks and minerals. Experiments were performed by heating olivine or harzburgite with aqueous solutions at 90°C for up to 213 days in glass bottles sealed with butyl rubber stoppers. Although H2 and CH4 increased steadily throughout the experiments, the levels were very similar to those found in mineral-free controls, indicating that the rubber stoppers were the predominant source of these compounds. Levels of H2 above background were observed only during the first few days of reaction of harzburgite when CO2 was added to the headspace, with no detectable production of H2 or CH4 above background during further heating of the harzburgite or in experiments with other mineral reactants. Consequently, our results indicate that production of H2 and CH4 during low-temperature alteration of ultramafic rocks may be much more limited than some recent experimental studies have suggested. We also found no evidence to support a recent report suggesting that spinels in ultramafic rocks may stimulate H2 production. While secondary silicates were observed to precipitate during the experiments, formation of these deposits was dominated by Si released by dissolution of the glass bottles, and reaction of the primary silicate minerals appeared to be very limited. While use of glass bottles and rubber stoppers has become commonplace in experiments intended to study processes that occur during serpentinization of ultramafic rocks at low temperatures, the high levels of H2, CH4, and SiO2 released during heating indicate that these reactor materials are unsuitable for this purpose.

A model, describing the influence of water management alternatives on dike stability

Directory of Open Access Journals (Sweden)

J. W. M. Lambert

2015-11-01

Full Text Available The awareness is rising that economic effects of Land Subsidence are high. Nevertheless, quantifying these economic losses is difficult and, as far as known, not yet done in a sophisticated way. Also, to be able to decide about future strategies, for example to avoid or decrease subsidence, it is necessary to know the financial consequences of measures and possible solutions. As a first step to quantify these economic effects, a MODFLOW-SCR (coupled MODFLOW-Settlements model is coupled with the model DAM. Based on the local stratigraphy, the shape and composition of the existing dike or levee, the level of the surface water and the surface level, macro-stability of the dike is calculated and – if the dike does not meet the required stability – adaptions are proposed. The model enables to separate effects that are caused by sea-level rise and the effects of subsidence. Coupling the DAM model with an economic model to calculate costs of these adaptions is under construction.

A jurassic-cretaceous dolerite dike from Sri Lanka

International Nuclear Information System (INIS)

Yoshida, M.; Vitanage, P.W.

1989-01-01

A dolerite dike from southwestern Sri Lanka gave whole-rock K-Ar ages of 152.6 ± 7.6 Ma and 143.3 ± 7.2 Ma. Many of the other dolerite dikes of Sri Lanka are considered to be of Mesozoic ages judging from the present age data and tectonometamorphic history of Sri Lanka. Petrographic similarities should not be used for age correlations, because dolerites of different age may have the same petrography. Preliminary natural remanent magnetization (NRM) after AF and thermal demagnetization gave a mean inclination of 24.6deg and declination of 67.5deg with α95=21.7deg. A virtual geomagnetic pole position calculated from the mean NRM was rotated relative to Antarctica so as to fit with that obtained from the Jurassic Ferrar dolerite of Antarctica. This rotation results in the location and attitude of Sri Lanka to attach with Antarctica at Lutzow-Holm Bay as suggested by Barron et al. (1978). (author). 18 refs

The U resources inventory at Tebalungkang sector, west Kalimantan systematic prospection stage

International Nuclear Information System (INIS)

Soetopo, B.; Suripto; Boman; Sajiyo

1996-01-01

The systematic prospection at Tebalungkang sector, West Kalimantan was carried out to characterize the occurrence of U mineralization and to invent the potential U resources at the area. The investigation was done on the basis of previous results, i.e. radiometric anomalous outcrops and boulders of 1000-7000 C/s. The methods for the investigation was systematic geological mapping and radiometric measurements of soil and tranced rocks and supported by mineralogical and geochemical analyses. The results of the investigation show that this area consists of metamorphic rocks, intruded by granite quartz-diorite batholites and dike of andesite and lamprophyre. From geological structure this is 30 o plunging from anticlin NE-SW and NNW-SSE, is crossed by NE-SW and E-W normal faults and NW-SE and WNW-ESE strike slip faults. Uranium mineralization appears in quartz-schist brecciated and quachitite (lamprophyre). The radioactive minerals were thorite and monazite, associated with rutile, ilmenite, magnetite, hematite, pyrite, calcopyrite, muscovite, apatite and allanite. The U content from rock samples has been found to be 4,5-54,75 ppm U

Case studies of extended model-based flood forecasting: prediction of dike strength and flood impacts

Science.gov (United States)

Stuparu, Dana; Bachmann, Daniel; Bogaard, Tom; Twigt, Daniel; Verkade, Jan; de Bruijn, Karin; de Leeuw, Annemargreet

2017-04-01

Flood forecasts, warning and emergency response are important components in flood risk management. Most flood forecasting systems use models to translate weather predictions to forecasted discharges or water levels. However, this information is often not sufficient for real time decisions. A sound understanding of the reliability of embankments and flood dynamics is needed to react timely and reduce the negative effects of the flood. Where are the weak points in the dike system? When, how much and where the water will flow? When and where is the greatest impact expected? Model-based flood impact forecasting tries to answer these questions by adding new dimensions to the existing forecasting systems by providing forecasted information about: (a) the dike strength during the event (reliability), (b) the flood extent in case of an overflow or a dike failure (flood spread) and (c) the assets at risk (impacts). This work presents three study-cases in which such a set-up is applied. Special features are highlighted. Forecasting of dike strength. The first study-case focusses on the forecast of dike strength in the Netherlands for the river Rhine branches Waal, Nederrijn and IJssel. A so-called reliability transformation is used to translate the predicted water levels at selected dike sections into failure probabilities during a flood event. The reliability of a dike section is defined by fragility curves - a summary of the dike strength conditional to the water level. The reliability information enhances the emergency management and inspections of embankments. Ensemble forecasting. The second study-case shows the setup of a flood impact forecasting system in Dumfries, Scotland. The existing forecasting system is extended with a 2D flood spreading model in combination with the Delft-FIAT impact model. Ensemble forecasts are used to make use of the uncertainty in the precipitation forecasts, which is useful to quantify the certainty of a forecasted flood event. From global

Source characteristics and tectonic setting of mafic-ultramafic intrusions in North Xinjiang, NW China: Insights from the petrology and geochemistry of the Lubei mafic-ultramafic intrusion

Science.gov (United States)

Chen, Bao-Yun; Yu, Jin-Jie; Liu, Shuai-Jie

2018-05-01

The newly discovered Lubei sulfide-bearing mafic-ultramafic intrusion forms the western extension of the Huangshan-Jin'erquan mafic-ultramafic intrusion belt in East Tianshan, NW China. The Lubei intrusion comprises hornblende peridotite, lherzolite, and harzburgite in its southern portion, gabbro in its middle portion, and hornblende gabbro in its northern portion. Intrusive relationships indicate that three magma pulses were involved in the formation of the intrusion, and that they were likely evolved from a common primitive magma. Estimated compositions of the Lubei primitive magma are similar to those of island arc calc-alkaline basalt except for the low Na2O and CaO contents of the Lubei primitive magma. This paper reports on the mineral compositions, whole-rock major and trace element contents, and Rb-Sr and Sm-Nd isotopic compositions of the Lubei intrusion, and a zircon LA-MC-ICP-MS U-Pb age for hornblende gabbro. The Lubei intrusion is characterized by enrichment in large-ion lithophile elements, depletion in high-field-strength elements, and marked negative Nb and Ta anomalies, with enrichment in chondrite-normalized light rare earth elements. It exhibits low (87Sr/86Sr)i ratios of 0.70333-0.70636 and low (143Nd/144Nd)i ratios of 0.51214-0.51260, with positive εNd values of +4.01 to +6.33. LA-ICP-MS U-Pb zircon ages yielded a weighted-mean age of 287.9 ± 1.6 Ma for the Lubei intrusion. Contemporaneous mafic-ultramafic intrusions in different tectonic domains in North Xinjiang show similar geological and geochemical signatures to the Lubei intrusion, suggesting a source region of metasomatized mantle previously modified by hydrous fluids from the slab subducted beneath the North Xinjiang region in the early Permian. Metasomatism of the mantle was dominated by hydrous fluids and was related to subduction of the Paleo-Asian oceanic lithosphere during the Paleozoic. Sr-Nd-Pb isotopic compositions suggest that the mantle source was a mixture of depleted mid

Fish assemblages, connectivity, and habitat rehabilitation in a diked Great Lakes coastal wetland complex

Science.gov (United States)

Kowalski, Kurt P.; Wiley, Michael J.; Wilcox, Douglas A.

2014-01-01

Fish and plant assemblages in the highly modified Crane Creek coastal wetland complex of Lake Erie were sampled to characterize their spatial and seasonal patterns and to examine the implications of the hydrologic connection of diked wetland units to Lake Erie. Fyke netting captured 52 species and an abundance of fish in the Lake Erie–connected wetlands, but fewer than half of those species and much lower numbers and total masses of fish were captured in diked wetland units. Although all wetland units were immediately adjacent to Lake Erie, there were also pronounced differences in water quality and wetland vegetation between the hydrologically isolated and lake-connected wetlands. Large seasonal variations in fish assemblage composition and biomass were observed in connected wetland units but not in disconnected units. Reestablishment of hydrologic connectivity in diked wetland units would allow coastal Lake Erie fish to use these vegetated habitats seasonally, although connectivity does appear to pose some risks, such as the expansion of invasive plants and localized reductions in water quality. Periodic isolation and drawdown of the diked units could still be used to mimic intermediate levels of disturbance and manage invasive wetland vegetation.

Assessment of Shallow-Water Habitat Availability in Modified Dike Structures, Lower Missouri River, 2004

Science.gov (United States)

Jacobson, Robert B.; Elliott, Caroline M.; Johnson, Harold E.

2004-01-01

This study documented the effects of wing-dike notching on the availabilit of shallow water habitat in the Lower Missouri River. Five wing dikes were surveyed in late May 2004 after they were notched in early May as part of shallow-water habitat (SWH) rehabilitation activities undertaken by the U.S. Army Corps of Engineers. Surveys included high-resolution hydroacoustic depth, velocity, and substrate mapping. Relations of bottom elevations within the wing dike fields to index discharges and water-surface elevations indicate that little habitat meeting the SWH definition was created immediately following notching. This result is not unexpected, as significant geomorphic adjustment may require large flow events. Depth, velocity, and substrate measurements in the post-rehabilitation time period provide baseline data for monitoring ongoing changes. Differences in elevation and substrate were noted at all sites. Most dike fields showed substantial aggradation and replacement of mud substrate with sandier sediment, although the changes did not result in increased availability of SWH at the index discharge. It is not known how much of the elevation and substrate changes can be attributed directly to notching and how much would result from normal sediment transport variation.

GPR Imaging of Clastic Dikes at the Hanford Site, Hanford, Washington

International Nuclear Information System (INIS)

Clement, William P.; Murray, Christopher J.

2007-01-01

We use ground penetrating radar (GPR) data to help determine the spatial distribution and the subsurface geometry of clastic injection dikes at the Hanford site. This information will help to improve the understanding of the hydrological role of these ubiquitous clastic dikes at the Hanford Site. We collected 100 MHz ground penetrating radar (GPR) 3D surface reflection data at two sites, the S-16 Pond and the Army Loop Road sites, and 2D reflection data along a 6.9 km linear transect near the Army Loop Road site. The dikes are distinguished in the GPR data by a strongly attenuated zone, disruptions in the continuity of reflections, and diffractions where reflections are disrupted. In general, the data quality is better at the Army Loop Road and Traverse sites than at the S-16 Pond site, probably due to the presence of cobbles at the S-16 Pond site. A high-moisture, fine-grained unit probably causes the strong reflections at the Army Loop Road site and the Traverse survey site. The signal penetration varies between 5 to 12 m below the land surface

Hazard Models From Periodic Dike Intrusions at Kı¯lauea Volcano, Hawai`i

Science.gov (United States)

Montgomery-Brown, E. K.; Miklius, A.

2016-12-01

The persistence and regular recurrence intervals of dike intrusions in the East Rift Zone (ERZ) of Kı¯lauea Volcano lead to the possibility of constructing a time-dependent intrusion hazard model. Dike intrusions are commonly observed in Kı¯lauea Volcano's ERZ and can occur repeatedly in regions that correlate with seismic segments (sections of rift seismicity with persistent definitive lateral boundaries) proposed by Wright and Klein (USGS PP1806, 2014). Five such ERZ intrusions have occurred since 1983 with inferred locations downrift of the bend in Kı¯lauea's ERZ, with the first (1983) being the start of the ongoing ERZ eruption. The ERZ intrusions occur on one of two segments that are spatially coincident with seismic segments: Makaopuhi (1993 and 2007) and Nāpau (1983, 1997, and 2011). During each intrusion, the amount of inferred dike opening was between 2 and 3 meters. The times between ERZ intrusions for same-segment pairs are all close to 14 years: 14.07 (1983-1997), 14.09 (1997-2011), and 13.95 (1993-2007) years, with the Nāpau segment becoming active about 3.5 years after the Makaopuhi segment in each case. Four additional upper ERZ intrusions are also considered here. Dikes in the upper ERZ have much smaller opening ( 10 cm), and have shorter recurrence intervals of 8 years with more variability. The amount of modeled dike opening during each of these events roughly corresponds to the amount of seaward south flank motion and deep rift opening accumulated in the time between events. Additionally, the recurrence interval of 14 years appears to be unaffected by the magma surge of 2003-2007, suggesting that flank motion, rather than magma supply, could be a controlling factor in the timing and periodicity of intrusions. Flank control over the timing of magma intrusions runs counter to the historical research suggesting that dike intrusions at Kı¯lauea are driven by magma overpressure. This relatively free sliding may have resulted from decreased

Seismic Amplitude Ratio Analysis of the 2014-2015 Bár∂arbunga-Holuhraun Dike Propagation and Eruption

Science.gov (United States)

Caudron, Corentin; White, Robert S.; Green, Robert G.; Woods, Jennifer; Ágústsdóttir, Thorbjörg; Donaldson, Clare; Greenfield, Tim; Rivalta, Eleonora; Brandsdóttir, Bryndís.

2018-01-01

Magma is transported in brittle rock through dikes and sills. This movement may be accompanied by the release of seismic energy that can be tracked from the Earth's surface. Locating dikes and deciphering their dynamics is therefore of prime importance in understanding and potentially forecasting volcanic eruptions. The Seismic Amplitude Ratio Analysis (SARA) method aims to track melt propagation using the amplitudes recorded across a seismic network without picking the arrival times of individual earthquake phases. This study validates this methodology by comparing SARA locations (filtered between 2 and 16 Hz) with the earthquake locations (same frequency band) recorded during the 2014-2015 Bár∂arbunga-Holuhraun dike intrusion and eruption in Iceland. Integrating both approaches also provides the opportunity to investigate the spatiotemporal characteristics of magma migration during the dike intrusion and ensuing eruption. During the intrusion SARA locations correspond remarkably well to the locations of earthquakes. Several exceptions are, however, observed. (1) A low-frequency signal was possibly associated with a subglacial eruption on 23 August. (2) A systematic retreat of the seismicity was also observed to the back of each active segment during stalled phases and was associated with a larger spatial extent of the seismic energy source. This behavior may be controlled by the dike's shape and/or by dike inflation. (3) During the eruption SARA locations consistently focused at the eruptive site. (4) Tremor-rich signal close to ice cauldrons occurred on 3 September. This study demonstrates the power of the SARA methodology, provided robust site amplification; Quality Factors and seismic velocities are available.

Mean Flow and Turbulence Near a Series of Dikes

Science.gov (United States)

Yaeger, M. A.; Duan, J. G.

2008-12-01

Scour around various structures obstructing flow in an open channel is a common problem faced by river engineers. To better understand why this occurs, two questions must be answered: what are the mean flow and turbulence distributions around these structures and how do these two fields affect sediment transport? In addition, are the mean flow or turbulence properties more important in predicting the local transport rate? To answer these questions, a near-bed turbulence and shear stress study was conducted in a flat, fixed bed laboratory flume. Three dikes were placed on the left wall at right angles to the flow, extending partway into the flow, and remaining fully emerged throughout the experiment. A micro acoustic Doppler velocimeter (ADV) was used to measure velocities near the bed in the x, y, and z directions and then the turbulence intensities and Reynolds stresses were calculated from these measurements. Preliminary results showed that mean velocity has no relation to the formation of scour near the tips of the dikes but that Reynolds stresses and turbulence intensities do. It was shown that the horizontal component of the Reynolds stress near the bed contributed the most to the formation of scour. The maximum value of this component was over 200 times that of the mean bed shear stress of the incoming flow, whereas in a single dike field, the same Reynolds stress is about 60 times that of the incoming flow. The magnitudes of the other two components of the Reynolds stress were less than that of the horizontal component, with magnitudes about 20 times that of the incoming flow. This may be attributed to the very small contribution of the vertical velocity in these components. Turbulence intensity magnitudes were about 3 to 5 times that of the incoming flow, with the largest being u'. The largest values for both Reynolds stresses and turbulence intensities were seen at the tip of the second dike in the series. Better understanding of these flow processes will

On the physical links between the dynamics of the Izu Islands 2000 dike intrusions and the statistics of the induced seismicity

Science.gov (United States)

Passarelli, Luigi; Rivalta, Eleonora; Simone, Cesca; Aoki, Yosuke

2014-05-01

The emplacement of magma-filled dikes often induce abundant seismicity in the surrounding host rocks. Most of the earthquakes are thought to occur close to the propagating tip (or edges, in 3D) of the dike, where stresses are concentrated. The resulting seismicity often appears as a swarm, controlled mainly by dike-induced stresses and stressing rate and by other factors, such as the background stressing rate, tectonic setting, regional stresses and tectonic history. The spatial distribution and focal mechanisms of the seismicity bear information on the interaction of the dike stress field and the tectonic setting of the area. The seismicity accompanying the intrusion of a dike is usually characterized by weak events, for which it is difficult to calculate the focal mechanisms. Therefore, only for a few well-recorded dike intrusions a catalog of focal mechanisms, allowing to perform a robust statistical analysis, is available. The 2000 dike intrusion at Miyakejima is in this sense an outstanding case, as about 18000 seismic events were recorded in a time span of three months. This seismic swarm was one of the most energetic ever recorded with five M>6 earthquakes. For this swarm a catalog of 1500 focal mechanisms is avalable (NIED, Japan). We perform a clustering analysis of the focal mechanism solutions, in order to infer the most frequent focal mechanism features prior to the intrusion (pre-diking period) and during the co-diking period. As previously suggested, we find that the dike stress field modified substantially the pre-existing seismicity pattern, by shadowing some non-optimally oriented strike-slip structures and increasing seismic rate on optimally oriented strike-slip tectonic structures. Alongside, during the co-diking period a large number of normal and oblique-normal faulting were observed. These events cannot be explained within the tectonics of the intrusion area. We suggest they are directly generated by the intense stress field induced at the

Evaluation of computer-based library services at Kenneth Dike ...

African Journals Online (AJOL)

This study evaluated computer-based library services/routines at Kenneth Dike Library, University of Ibadan. Four research questions were developed and answered. A survey research design was adopted; using questionnaire as the instrument for data collection. A total of 200 respondents randomly selected from 10 ...

Experiments of dike-induced deformation: Insights on the long-term evolution of divergent plate boundaries

KAUST Repository

Trippanera, D.

2015-10-22

The shallow transport of magma occurs through dikes causing surface deformation. Our understanding of the effects of diking at the surface is limited, especially on the long term, for repeated intrusive episodes. We use analogue models to study the upper crustal deformation induced by dikes. We insert metal plates within cohesive sand with three setups: in setup A, the intrusion rises upward with constant thickness and in setups B and C, the intrusion thickens at a fixed depth, with final rectangular (setup B) or triangular (setup C) shape in section. Setup A creates a doming delimited by reverse faults, with secondary apical graben, without close correspondence in nature. In setups B and C, a depression flanked by two uplifted areas is bordered by inward dipping normal faults propagating downward and, for deeper intrusions in setup B, also by inner faults, reverse at the surface; this deformation is similar to what is observed in nature, suggesting a consistent physical behavior. Dikes in nature initially propagate developing a mode I fracture at the tip, subsequently thickened by magma intrusion, without any host rock translation in the propagation direction (as in setup A). The deformation pattern in setups B and C depends on the intrusion depth and thickness, consistently to what is observed along divergent plate boundaries. The early deformation in setups B and C is similar to that from a single rifting episode (i.e., Lakagigar, Iceland, and Dabbahu, Afar), whereas the late stages resemble the structure of mature rifts (i.e., Krafla, Iceland), confirming diking as a major process in shaping divergent plate boundaries.

Topographic and Structural Effects on Dike Propagation and Eruption

International Nuclear Information System (INIS)

E. Gaffney

2006-01-01

We have modeled magma flow in a dike rising in a crack whose strike runs from a highland or ridge to an adjacent lowland to determine the effect of topography on the flow, using a 3D hydromechanical code, FLAC3D (http://www.itascacg.com). The aperture, a, is calculated as a variable in a sheet of zones of fixed width d during the simulation as a function of model deformation. The permeability tensor of each zone is adjusted at each time step in response to the pressure in the cell according to the relationship k ij = (delta) ij α 3 /12μd, which is obtained by equating the flow through the layer of permeable zones from Darcy's law with Poiseuille's law under the same gradient. The fluid viscosity is μ, and the crack width is a We found a distinct tendency for the flow to be diverted away from the highland end of the strike toward the lowland. For the 4-km long strike length we modeled, eruption was offset between 500 and 1250 m toward the lowland from the center of the strike length. Separation of the geometric effect of the topography from the topographic overburden effect on lateral confining stresses at the crack indicates that both contribute to the effect. Although this analysis explains a tendency for volcanic eruptions to occur in low lands, it does not preclude eruptions on highlands. If the strike on the dike is parallel to the length of a ridge, the effect described here will not operate. Another possibility is that the strike length of a dike may be so short that its strike does not extend far beyond the edge of the ridge. A separate simulation used a 2D discrete element code, UDEC (http://www.itascacg.com) to investigate the interaction of magma in a vertical dike with normal faults and stratigraphy. We found that steeper faults are more easily intruded and that, as the magma rises to within a few hundred meters of the surface, sills are intruded into stratigraphic discontinuities in the hanging wall but not into the foot wall. The particular

The Behaviour of Chromium Isotopes during the Oxidative Weathering of Ultramafic Rocks

DEFF Research Database (Denmark)

Paulukat, Cora Stefanie; Døssing, Lasse Nørbye; Mondal, Sisir K.

The chromium isotope system has been proven to be a redox-sensitve proxy in ancient and modern environmental studies (e.g. [1], [2]). In this study we investigated Cr isotope fractionation during soil formation from Archean (3.1-3.3 Ga) ultramafic rocks, intruded into metamorphic rocks of the Iron...

Conceptual model for reinforced grass on inner dike slopes

NARCIS (Netherlands)

Verhagen, H.J.; ComCoast

2005-01-01

A desk study has been carried out in order to develop a conceptual model for the erosion of inner dike slopes with reinforced grass cover. Based on the results the following can be concluded: The presence of a geosynthetic in a grass slope can be taken into account in the EPM method by increasing

Study of Water Quality Changes due to Offshore Dike Development Plan at Semarang Bay

Science.gov (United States)

Wibowo, M.; Hakim, B. A.

2018-03-01

Now, coast of Semarang Gulf is experiencing rapid growth because Semarang as a center economic growth in Central Java. On the other hand, coast of Gulf Semarang also experience a variety of very complex problems, such as tidal flood, land subsidence, as well as coastal damage due to erosion and sedimentation process. To overcome these problems BPPT and other institutions proposed construction of offshore dike. Construction of the offshore dike is a technology intervention to the marine environment that will certainly affect the hydrodynamic balance in coastal water including water quality in the Gulf of Semarang. Therefore, to determine changes in water quality that will happen is necessary to study the water quality modeling. The study was conducted by using a computational modeling software MIKE-21 Eco Lab Module from DHI. Based on this study result knowed that development offshore dike will change water quality in the west and east dam that formed. In west dam the average value of the DO decline 81.56% - 93.32 % and the average value of BOD rise from 22.01 to 31.19% and in the east dam, there is an increase average value DO of 83.19% - 75.80%, while the average value of BOD decrease by 95,04% - 96.01%. To prevent the downward trend in water quality due to the construction of the offshore dike, its necessary precautions at the upstream area before entering the Gulf of Semarang.

Mesozoic mafic dikes from the Shandong Peninsula, North China Craton: Petrogenesis and tectonic implications

International Nuclear Information System (INIS)

Liu Shen; Hu Ruizhong; Zhao Junhong; Feng Caixia; Zou, Haibo

2006-01-01

Mesozoic mafic dikes are widely distributed in Luxi (Mengyin and Zichuan) and Jiaodong regions of the Shandong Peninsula, China, providing an opportunity of investigating the nature of the lost lithospheric mantle beneath the North China Craton (NCC). The mafic dikes are characterized by strong depletion in high field strength elements (HFSE), enrichment in light rare earth elements (LREE), highly variable Th/U ratios, high initial ( 87 Sr/ 86 Sr) i (0.7050-0.7099) and negative ε Nd (T) (-6.0 to -17.6). They were derived from melting of metasomatized portions of the subcontinental lithospheric mantle, followed by fractionation of clinopyroxenes. The similarity in Nd isotopic compositions between the Mengyin gabbro dikes and the Paleozoic peridotite xenoliths suggests that ancient lithospheric mantle was still retained at 120 Ma below Mengyin, although the ancient lithospheric mantle in many other places beneath NCC had been severely modified. There might be multiple enrichment events in the lithospheric mantle. An early-stage (before or during Paleozoic) rutile-rich metasomatism affected the lithospheric mantle below Mengyin, Jiaodong and Zichuan. Since then, the lithospheric mantle beneath Mengyin was isolated. A late-stage metasomatism by silicate melts modified the lithospheric mantle beneath Jiaodong and Zichuan but not Mengyin. The removal of the enriched lithospheric mantle and the generation of the mafic dikes may be mainly related to the convective overturn accompanying Jurassic-Cretaceous subduction of the paleo-Pacific plate. (author)

Tectonic implications of a paleomagnetic direction obtained from a Miocene dike swarm in central Honshu, Japan

Science.gov (United States)

Hoshi, H.; Sugisaki, Y.

2017-12-01

Central Honshu of Japan is an ideal field for the study of crustal deformation related to arc-arc collision. In this study we obtained rock magnetic and paleomagnetic results from early Miocene igneous rocks in central Honshu in order to examine rotational deformation caused by the collision of the Izu-Bonin-Mariana (IBM) arc with central Honshu. In Takane of the Hida region, gabbro intrusions and older sedimentary rocks are intruded by numerous andesitic dikes that comprise a parallel dike swarm. The dikes formed under two different normal-faulting paleostress conditions, which were suggested using a method of clustering dike orientations. Cross-cutting relationships indicate that the two paleostress conditions existed during the same period. More than 240 oriented cores were taken at 38 sites in two localities for magnetic study. The andesites and gabbros generally have magnetite, and some andesites also contain pyrrhotite. The magnetite records easterly deflected remanent magnetization directions of dual polarities that pass the reversals test. Positive baked contact tests at two sites demonstrate that the easterly deflected direction is a thermoremanent magnetization acquired at the time of intrusion. The overall in situ (i.e., in geographic coordinates) mean direction for andesitic dikes is judged to be highly reliable, although there are two possible scenarios for explaining the easterly deflection: (1) clockwise rotation and (2) tilting to the northwest. We prefer the former scenario and conclude that 45° clockwise rotation occurred in Takane with respect to the North China Block of the Asian continent. This rotation must represent the clockwise rotation of entire Southwest Japan during the opening period of the Japan Sea. Very little difference is observed between the amount of the easterly deflection in Takane and those in the Tokai and Hokuriku regions, indicating no significant relative rotation. Thus, the crust beneath Takane has not suffered rotation

New insights into the origin of ladder dikes: Implications for punctuated growth and crystal accumulation in the Cathedral Peak granodiorite

Science.gov (United States)

Wiebe, R. A.; Jellinek, A. M.; Hodge, K. F.

2017-04-01

Ladder dikes are steep tabular bodies, typically a meter or less thick, composed of moderately dipping, concave upward, alternating dark (i.e. schlieren) and light bands oriented roughly perpendicular to the ladder dike margins. These structures occur widely but sparsely in granitic rocks and are found prominently in the Cathedral Peak granodiorite (CPG) of the Tuolumne Intrusive suite. Previous studies have interpreted that ladder dikes form as a result of processes including the downward flow of crystal mush in cracks within strong crystal mush or by upward flow in steep tubes that migrate within a strong crystal mush. Our new observations indicate that ladder dikes formed by downward flow of crystal mush in troughs or valleys, in a manner potentially comparable to trough bands in mafic layered intrusions. Extensions of the schlieren outward and upward away from the ladder dike margins into the host granite demonstrate that the host granite was deposited as mounds on both sides at the same time as the ladder dikes. Ladder dikes, therefore, record lateral flows of crystal mush on a magma chamber floor. Vertical exposures suggest these flows are on the order of ten meters thick. Some steep exposures on granite domes indicate multiple ladder dikes (and flows) over a stratigraphic height of 80-100 m. Later (stratigraphically higher) flows commonly deform and erode the top of an earlier flow, and granitic material rich in K-feldspar megacrysts has locally engulfed large blocks of ladder dikes, demonstrating that the megacrysts were also transported in flows. Flows in the CPG are directed away from the center of the pluton toward the western and eastern margins and apparently spread along a strong crystal mush floor and into a rheologically complex CPG magma. Whereas established dynamical models for spreading (single phase) gravity currents with simple and complex rheologies explain the elongate geometry, spacing and orientation of the tabular bodies, the origin and

Developing Sustainable Agromining Systems in Agricultural Ultramafic Soils for Nickel Recovery

Directory of Open Access Journals (Sweden)

Petra Susan Kidd

2018-06-01

Full Text Available Ultramafic soils are typically enriched in nickel (Ni, chromium (Cr, and cobalt (Co and deficient in essential nutrients, making them unattractive for traditional agriculture. Implementing agromining systems in ultramafic agricultural soils represent an ecological option for the sustainable management and re-valorisation of these low-productivity landscapes. These novel agroecosystems cultivate Ni-hyperaccumulating plants which are able to bioaccumulate this metal in their aerial plant parts; harvested biomass can be incinerated to produce Ni-enriched ash or “bio-ore” from which Ni metal, Ni ecocatalysts or pure Ni salts can be recovered. Nickel hyperaccumulation has been documented in ~450 species, and in temperate latitudes these mainly belong to the family Brassicaceae and particularly to the genus Odontarrhena (syn. Alyssum pro parte. Agromining allows for sustainable metal recovery without causing the environmental impacts associated with conventional mining activities, and at the same time, can improve soil fertility and quality and provide essential ecosystem services. Parallel reductions in Ni phytotoxicity over time would also permit cultivation of conventional agricultural crops. Field studies in Europe have been restricted to Mediterranean areas and these only evaluated the Ni-hyperaccumulator Odontarrhena muralis s.l. Two recent EU projects (Agronickel and LIFE-Agromine have established a network of agromining field sites in ultramafic regions with different edapho-climatic characteristics across Albania, Austria, Greece and Spain. Soil and crop management practices are being developed so as to optimize the Ni agromining process; field studies are evaluating the potential benefits of fertilization regimes, crop selection and cropping patterns, and bioaugmentation with plant-associated microorganisms. Hydrometallurgical processes are being up-scaled to produce nickel compounds and energy from hyperaccumulator biomass. Exploratory

Uncertainty assessment of a dike with an anchored sheet pile wall using FEM

Directory of Open Access Journals (Sweden)

Rippi Aikaterini

2016-01-01

Full Text Available The Dutch design codes for the dikes with retaining walls rely on Finite Element Analysis (FEM in combination with partial safety factors. However, this can lead to conservative designs. For this reason, in this study, a reliability analysis is carried out with FEM calculations aiming to demonstrate the feasibility of reliability analysis for a dike with an anchored sheet pile wall modelled in the 2D FEM, Plaxis. Sensitivity and reliability analyses were carried out and enabled by coupling the uncertainty package, OpenTURNS and Plaxis. The most relevant (ultimate limit states concern the anchor, the sheet pile wall, the soil body failure (global instability and finally the system. The case was used to investigate the applicability of the First Order Reliability Method (FORM and Directional Sampling (DS to analysing these limit states. The final goal is to estimate the probability of failure and identify the most important soil properties that affect the behaviour of each component and the system as a whole. The results of this research can be used to assess and optimize the current design procedure for dikes with retaining walls.

Evaluation of ultramafic deposits in the Eastern United States and Puerto Rico as sources of magnesium for carbon dioxide sequestration

Energy Technology Data Exchange (ETDEWEB)

Fraser Goff; George Guthrie; Bruce Lipin; Melissa Fite; Steve Chipera; Dale Counce; Emily Kluk; Hans Ziock

2000-04-01

In this report, the authors evaluate the resource potential of extractable magnesium from ultramafic bodies located in Vermont, the Pennsylvania-Maryland-District-of-Columbia (PA-MD-DC) region, western North Carolina, and southwestern Puerto Rico. The first three regions occur in the Appalachian Mountains and contain the most attractive deposits in the eastern United States. They were formed during prograde metamorphism of serpentinized peridotite fragments originating from an ophiolite protolith. The ultramafic rocks consist of variably serpentinized dunite, harzburgite, and minor iherzolite generally containing antigorite and/or lizardite as the major serpentine minor phases. Chrysotile contents vary from minor to major, depending on occurrence. Most bodies contain an outer sheath of chlorite-talc-tremolite rock. Larger deposits in Vermont and most deposits in North Carolina contain a core of dunite. Magnesite and other carbonates are common accessories. In these deposits, MgO ranges from 36 to 48 wt % with relatively pure dunite having the highest MgO and lowest H{sub 2}O contents. Ultramafic deposits in southwestern Puerto Rico consist of serpentinized dunite and harzburgite thought to be emplaced as large diapirs or as fragments in tectonic melanges. They consist of nearly pure, low-grade serpentinite in which lizardite and chrysotile are the primary serpentine minerals. Chlorite is ubiquitous in trace amounts. Magnesite is a common accessory. Contents of MgO and H{sub 2}O are rather uniform at roughly 36 and 13 wt %. Dissolution experiments show that all serpentinites and dunite-rich rocks are soluble in 1:1 mixtures of 35% HCl and water by volume. The experiments suggest that low-grade serpentinites from Puerto Rico are slightly more reactive than the higher grade, antigorite-bearing serpentinites of the Appalachian Mountains. The experiments also show that the low-grade serpentinites and relatively pure dunites contain the least amounts of undesirable

Topographic and Structural Effects on Dike Propagation and Eruption

Energy Technology Data Exchange (ETDEWEB)

E. Gaffney

2006-04-13

We have modeled magma flow in a dike rising in a crack whose strike runs from a highland or ridge to an adjacent lowland to determine the effect of topography on the flow, using a 3D hydromechanical code, FLAC3D (http://www.itascacg.com). The aperture, a, is calculated as a variable in a sheet of zones of fixed width d during the simulation as a function of model deformation. The permeability tensor of each zone is adjusted at each time step in response to the pressure in the cell according to the relationship k{sub ij} = {delta}{sub ij} {alpha}{sup 3}/12{mu}d, which is obtained by equating the flow through the layer of permeable zones from Darcy's law with Poiseuille's law under the same gradient. The fluid viscosity is {mu}, and the crack width is a We found a distinct tendency for the flow to be diverted away from the highland end of the strike toward the lowland. For the 4-km long strike length we modeled, eruption was offset between 500 and 1250 m toward the lowland from the center of the strike length. Separation of the geometric effect of the topography from the topographic overburden effect on lateral confining stresses at the crack indicates that both contribute to the effect. Although this analysis explains a tendency for volcanic eruptions to occur in low lands, it does not preclude eruptions on highlands. If the strike on the dike is parallel to the length of a ridge, the effect described here will not operate. Another possibility is that the strike length of a dike may be so short that its strike does not extend far beyond the edge of the ridge. A separate simulation used a 2D discrete element code, UDEC (http://www.itascacg.com) to investigate the interaction of magma in a vertical dike with normal faults and stratigraphy. We found that steeper faults are more easily intruded and that, as the magma rises to within a few hundred meters of the surface, sills are intruded into stratigraphic discontinuities in the hanging wall but not into the

Inflation and Collapse of the Wai'anae Volcano (Oahu,Hawaii, USA):Insights from Magnetic Fabric Studies of Dikes

Science.gov (United States)

Lau, J. K. S.; Herrero-Bervera, E.; Moreira, M. A. D. A.

2016-12-01

The Waianae Volcano is the older of two shield volcanoes that make up the island of Oahu. Previous age determinations suggest that the subaerial portion of the edifice erupted between approximately 3.7 and 2.7 Ma. The eroded Waianae Volcano had a well-developed caldera centered near the back of its two most prominent valleys and two major rift zones: a prominent north-west rift zone, well-defined by a complex of sub-parallel dikes trending approximately N52W, and a more diffuse south rift zone trending between S20W to due South. In order to investigate the volcanic evolution, the plumbing and the triggering mechanisms of the catastrophic mass wasting that had occurred in the volcano, we have undertaken an AMS study of 7 dikes from the volcano. The width of the dikes ranged between 0.5 to 4 m. Low-field susceptibility versus temperature (k-T) and SIRM experiments were able to identify magnetite at 575 0C and at about 250-300 0C, corresponding to titanomagnetite.. Magnetic fabric studies of the dikes along a NW-SE section across the present southwestern part of the Waianae volcano have been conducted. The flow direction was studied using the imbrication angle between the dike walls and the magnetic foliation. The flow direction has been obtained in the 7 studied dikes. For the majority of the cases, the maximum axis, K1, appears to be perpendicular to the flow direction, and in some cases, with a permutation with respect to the intermediate axis, K2, or even with respect to the minimum axis, K3. In addition, in one of the sites studied, the minimum axis, K3, is very close to the flow direction. In all cases, the magma flowed along a direction with a moderate plunge. For six of the dikes, the interpreted flow was from the internal part of the volcano towards the volcano border, and corresponds probably to the inflation phase of the volcano. In two cases (dikes located on the northwestern side of the volcano), the flow is slightly downwards, possibly related to the

Compressible magma flow in a two-dimensional elastic-walled dike

NARCIS (Netherlands)

Woods, A.W.; Bokhove, Onno; de Boer, A; Hill, B.E.

2006-01-01

The ascent of magma to the Earth's surface is commonly modeled by assuming a fixed dike or flow geometry from a deep subsurface reservoir to the surface. In practice, however, this flow geometry is produced by deformation of the crust by ascending overpressured magma. Here, we explore how this

Mathematical investigation of tsunami-like long waves interaction with submerge dike of different thickness

Science.gov (United States)

Zhiltsov, Konstantin; Kostyushin, Kirill; Kagenov, Anuar; Tyryshkin, Ilya

2017-11-01

This paper presents a mathematical investigation of the interaction of a long tsunami-type wave with a submerge dike. The calculations were performed by using the freeware package OpenFOAM. Unsteady two-dimensional Navier-Stokes equations were used for mathematical modeling of incompressible two-phase medium. The Volume of Fluid (VOF) method is used to capture the free surface of a liquid. The effects caused by long wave of defined amplitude motion through a submerged dike of varying thickness were discussed in detail. Numerical results show that after wave passing through the barrier, multiple vortex structures were formed behind. Intensity of vortex depended on the size of the barrier. The effectiveness of the submerge barrier was estimated by evaluating the wave reflection and transmission coefficients using the energy integral method. Then, the curves of the dependences of the reflection and transmission coefficients were obtained for the interaction of waves with the dike. Finally, it was confirmed that the energy of the wave could be reduced by more than 50% when it passed through the barrier.

Assessment of study space usage in the Kenneth Dike Library ...

African Journals Online (AJOL)

This paper explored the actual use of the physical space in Kenneth Dike Library by the students' population, the role these spaces are playing for learning and for related services in the university of Ibadan academic environment. It looked at the suitability of available spaces and suggestions for improvement. Survey ...

Petrophysical characterization of the hydrothermal root zone in the sheeted dike complex from IODP Hole 1256D.

Science.gov (United States)

Violay, M.; Pezard, P. A.; Ildefonse, B.; Belghoul, A.; Mainprice, D.

2009-04-01

IODP (Integrated Ocean Drilling Program.) Site 1256 is located on the Cocos Plate in the Eastern Equatorial Pacific Ocean. It samples 15 Ma-old oceanic lithosphere that was formed at the EPR during a period of superfast spreading rate (> 200mm/yr). Drilling operations at Site 1256 were conducted during three ODP and IODP expeditions, and reached for the first time gabbros below the sheeted dike complex in Hole 1256D. This offers a unique opportunity to study in situ the fossil root zone of the sheeted dike complex in present-day oceanic crust. This zone is a boundary layer between the magmatic system of the melt lens (around 1100 °C), and the overlying high temperature hydrothermal system (≤ 450 °C). This boundary layer during crustal accretion is critical to our understanding of crustal processes along mid-ocean ridges. This work focuses on the petrophysical characterization of the root zone. Physical properties were determined from downhole geophysical profiles and images, and from laboratory petrophysical measurements from 21 minicores. Dikes, granoblastic dikes and gabbros testify to an important hydrothermal circulation in the vicinity of the magmatic lens. Porosity is primarily controlled by sample initial texture, hydrothermal alteration, and recrystallization processes. Green schist facies alteration of basalts is associated to relatively higher porosity values (≈ 2%) and a very variable organization of the pore space, as revealed by electrical properties. The electrical formation factor in diabase is high and variable (920 to 6087). Granoblastic dikes are characterized by locally recrystallized texture with Cpx and Opx (granulite facies) and little alteration at low temperature. The recrystallization induces abrupt decrease in porosity (fairly constant porosity, which likely consist mostly in microcracks. Crack density increases linearly with depth from 0.02 in diabase to 0.08 in gabbros. It is consistent with a fissural porosity (crack aspect ratio

Detecting areal changes in tidal flats after sea dike construction ...

Indian Academy of Sciences (India)

The main objective of this study was to estimate changes in the area of tidal flats that occurred after sea dike construction on the western coast of South Korea using Landsat-TM images. Applying the ISODATA method of unsupervised classification for Landsat-TM images, the tidal flats were identified, and the resulting areas ...

Sedimentation and contamination patterns of dike systems along the Rhône River (France)

Science.gov (United States)

Seignemartin, Gabrielle; Tena, Alvaro; Piégay, Hervé; Roux, Gwenaelle; Winiarski, Thierry

2017-04-01

Humans have historically modified the Rhône River, especially in the last centuries. In the 19th century, the river was systematically embanked for flood protection purposes, and works continued along the 20th century with dike system engineering work for navigation. The Rhône was canalised and its historical course by-passed by a series of hydroelectric dams. Besides, industrial activity polluted the river. For example, high levels of PCB's were attributed to the inputs of the heavily industrialized zone downstream from Lyon. During floods, these contaminants, associated with the suspended sediment, were trapped by the engineering works and the floodplain. Currently, a master plan to reactivate the river dynamics in the alluvial margins by removing the groyne-fields and dikes in the by-passed sections is being implemented. Within this context, this work aims to assess historical dynamics of sediment and associated contaminants in the floodplain (e.g. trace metal elements), notably in the dike system, in order to evaluate the contamination risk related to bank protection removal. With this objective, a transversal methodology has been applied coupling GIS diachronic analysis (old maps, bathymetric data, Orthophotos, LIDAR, etc.) to understand the historical floodplain evolution, sediment survey to obtain sediment thickness (metal rod and Ground Penetrating Radar), and sediment sampling (manual auger and core sampling) to obtain the metal element concentrations (X-Ray Fluorescence and Inductively Coupled Plasma Mass Spectrometry). By this way, metal element patterns were defined and used as contamination tracing indicators to apprehend the contamination history but also as geochemical background indicators to define the sediment source influence. We found that sediment temporal patterns are directly related with the by-pass construction year. Spatially, fine sediment deposition predominates in the dike systems, being lower in the floodplain already disconnected in

Geochemical characteristics and tectonic setting of the Tuerkubantao mafic-ultramafic intrusion in West Junggar, Xinjiang, China

Directory of Open Access Journals (Sweden)

Yufeng Deng

2015-03-01

Full Text Available Mineral chemistry, whole-rock major oxide, and trace element compositions have been determined for the Tuerkubantao mafic-ultramafic intrusion, in order to understand the early Paleozoic tectonic evolution of the West Junggar orogenic belt at the southern margin of the Central Asian orogenic belt. The Tuerkubantao mafic-ultramafic intrusion is a well-differentiated complex comprising peridotite, olivine pyroxenite, gabbro, and diorite. The ultramafic rocks are mostly seen in the central part of the intrusion and surrounded by mafic rocks. The Tuerkubantao intrusive rocks are characterized by enrichment of large ion lithophile elements and depleted high field strength elements relative to N-MORB. In addition, the Tuerkubantao intrusion displays relatively low Th/U and Nb/U (1.13–2.98 and 2.53–7.02, respectively and high La/Nb and Ba/Nb (1.15–4.19 and 37.7–79.82, respectively. These features indicate that the primary magma of the intrusion was derived from partial melting of a previously metasomatized mantle source in a subduction setting. The trace element patterns of peridotites, gabbros, and diorite in the Tuerkubantao intrusion have sub-parallel trends, suggesting that the different rock types are related to each other by differentiation of the same primary magma. The intrusive contact between peridotite and gabbro clearly suggest that the Tuerkubantao is not a fragment of an ophiolite. However, the Tuerkubantao intrusion displays many similarities with Alaskan-type mafic-ultramafic intrusions along major sutures of Phanerozoic orogenic belts. Common features include their geodynamic setting, internal lithological zoning, and geochemistry. The striking similarities indicate that the middle Devonian Tuerkubantao intrusion likely formed in a subduction-related setting similar to that of the Alaskan-type intrusions. In combination with the Devonian magmatism and porphyry mineralization, we propose that subduction of the oceanic slab has

Monogenetic volcanoes fed by interconnected dikes and sills in the Hopi Buttes volcanic field, Navajo Nation, USA

Science.gov (United States)

Muirhead, James D.; Van Eaton, Alexa R.; Re, Giuseppe; White, James D. L.; Ort, Michael H.

2016-01-01

Although monogenetic volcanic fields pose hazards to major cities worldwide, their shallow magma feeders (networks. Analysis of vent alignments using the pyroclastic massifs and other eruptive centers (e.g., maar-diatremes) shows a NW-SE trend, parallel to that of dikes in the region. We therefore infer that dikes fed many of the eruptions. Dikes are also observed in places transforming to transgressive (ramping) sills. Estimates of the observable volume of dikes (maximum volume of 1.90 × 106 m3) and sills (minimum volume of 8.47 × 105 m3) in this study reveal that sills at Hopi Buttes make up at least 30 % of the shallow intruded volume (∼2.75 × 106 m3 total) within 350 m of the paeosurface. We have also identified saucer-shaped sills, which are not traditionally associated with monogenetic volcanic fields. Our study demonstrates that shallow feeders in monogenetic fields can form geometrically complex networks, particularly those intruding poorly consolidated sedimentary rocks. We conclude that the Hopi Buttes eruptions were primarily fed by NW-SE-striking dikes. However, saucer-shaped sills also played an important role in modulating eruptions by transporting magma toward and away from eruptive conduits. Sill development could have been accompanied by surface uplifts on the order of decimeters. We infer that the characteristic feeder systems described here for the Hopi Buttes may underlie monogenetic fields elsewhere, particularly where magma intersects shallow, and often weak, sedimentary rocks. Results from this study support growing evidence of the important role of shallow sills in active monogenetic fields.

Passive monitoring of a sea dike during a tidal cycle using sea waves as a seismic noise source

Science.gov (United States)

Joubert, Anaëlle; Feuvre, Mathieu Le; Cote, Philippe

2018-05-01

Over the past decade, ambient seismic noise has been used successfully to monitor various geological objects with high accuracy. Recently, it has been shown that surface seismic waves propagating within a sea dike body can be retrieved from the cross-correlation of ambient seismic noise generated by sea waves. We use sea wave impacts to monitor the response of a sea dike during a tidal cycle using empirical Green's functions. These are obtained either by cross-correlation or deconvolution, from signals recorded by sensors installed linearly on the crest of a dike. Our analysis is based on delay and spectral amplitude measurements performed on reconstructed surface waves propagating along the array. We show that localized variations of velocity and attenuation are correlated with changes in water level as a probable consequence of water infiltration inside the structure. Sea dike monitoring is of critical importance for safety and economic reasons, as internal erosion is generally only detected at late stages by visual observations. The method proposed here may provide a solution for detecting structural weaknesses, monitoring progressive internal erosion, and delineating areas of interest for further geotechnical studies, in view to understanding the erosion mechanisms involved.

Clinopyroxenite dikes crosscutting banded peridotites just above the metamorphic sole in the Oman ophiolite: early cumulates from the primary V3 lava

Science.gov (United States)

Ishimaru, Satoko; Arai, Shoji; Tamura, Akihiro

2013-04-01

Oman ophiolite is one of the well-known ophiolites for excellent exposures not only of the mantle section but also of the crustal section including effusive rocks and the underlying metamorphic rocks. In the Oman ophiolite, three types of effusive rocks (V1, V2 and V3 from the lower sequences) are recognized: i.e., V1, MORB-like magma, V2, island-arc type lava, and V3, intra-plate lava (Godard et al., 2003 and references there in). V1 and V2 lavas are dominant (> 95 %) as effusive rocks and have been observed in almost all the blocks of northern part of the Oman ophiolite (Godard et al., 2003), but V3 lava has been reported only from Salahi area (Alabaster et al., 1982). It is clear that there was a time gap of lava eruption between V1-2 and V3 based on the presence of pelagic sediments in between (Godard et al., 2003). In addition, V3 lavas are fed by a series of doleritic dikes crosscutting V2 lava (Alley unit) (Alabaster et al., 1982). We found clinopyroxenite (CPXITE) dikes crosscutting deformation structure of basal peridotites just above the metamorphic sole in Wadi Ash Shiyah. The sole metamorphic rock is garnet amphibolite, which overlies the banded and deformed harzburgite and dunite. The CPXITE is composed of coarse clinopyroxene (CPX) with minor amount of chlorite, garnet (hydrous/anhydrous grossular-andradite) with inclusions of titanite, and serpentine formed at a later low-temperature stage. The width of the CPXITE dikes is 2-5 cm (10 cm at maximum) and the dikes contain small blocks of wall harzburgite. Almost all the silicates are serpentinized in the harzburgite blocks except for some CPX. The Mg# (= Mg/(Mg + Fe) atomic ratio) of the CPX is almost constant (= 0.94-0.95) in the serpentinite blocks but varies within the dikes, highest at the contact with the block (0.94) and decreasing with the distance from the contact to 0.81 (0.85 on average). The contents of Al2O3, Cr2O3, and TiO2 in the CPX of the dikes are 0.5-2.0, 0.2-0.6, and 0

Rare-earth element geochemistry in the Luanga Mafic-Ultramafic Complex, Para

International Nuclear Information System (INIS)

Suita, M.T.F.; Nilson, A.A.

1989-01-01

Six whole-rock samples (harzburgite, orthopyroxenic and norite) of the Luanga Mafic-Ultramafic Complex (Para) were analysed for rare-earth elements (REE) through plasma spectrometry. The Luanga Complex is a deformed and metamorphosed layered mafic-ultramafic body of Archaean age. The Complex underwent medium-grade metamorphism in three stages. The first stage (medium grade) involved local formation of tremolite and reduction of Ca content in plagioclase. The second stage (low grade) consisted of serpentinization of amphibole or ortopyroxene forming bastile and generation of albite + epidote + white mica + actinolite from plagioclase. The third stage involved renewed serpentinization and/or talcification of pre-existing minerals (including serpentine) along fracture and fault surfaces. The analysed rocks display light rare-earth element (LREE) enrichment up to sixty times the composition of the Leedly chondrite and La/Yb ratios from 6.2 to 20.0 they are low in medium rare-earth elements (MREE), displaying discrete to strong negative Eu anomaly even in plagioclase cumulates and are slightly enriched in heavy rare-earth elements (HREE), usually higher than chondrite values. The low MREE area related to the occurrence of orthopyroxene (bronzite) in a way similar to the pattern of alpine periodotites, while HREE enrichment is compatible with the presence of bronzite and Mg-olivine, probably an inherited igneous feature. (author) [pt

Three-Dimensional Analysis of dike/fault interaction at Mono Basin (California) using the Finite Element Method

Science.gov (United States)

La Marra, D.; Battaglia, M.

2013-12-01

Mono Basin is a north-trending graben that extends from the northern edge of Long Valley caldera towards the Bodie Hills and is bounded by the Cowtrack Mountains on the east and the Sierra Nevada on the west. The Mono-Inyo Craters volcanic chain forms a north-trending zone of volcanic vents extending from the west moat of the Long Valley caldera to Mono Lake. The Hartley Springs fault transects the southern Mono Craters-Inyo Domes area between the western part of the Long Valley caldera and June Lake. Stratigraphic data suggest that a series of strong earthquakes occurred during the North Mono-Inyo eruption sequence of ~1350 A.D. The spatial and temporal proximity between Hartley Springs Fault motion and the North Mono-Inyo eruption sequence suggests a possible relation between seismic events and eruptions. We investigate the interactions between slip along the Hartley Springs fault and dike intrusion beneath the Mono-Inyo craters using a three-dimensional finite element model of the Mono Basin. We employ a realistic representation of the Basin that includes topography, vertical and lateral heterogeneities of the crust, contact relations between fault planes, and a physical model of the pressure required to propagate the dike. We estimate (a) the distribution of Coulomb stress changes to study the influence of dike intrusion on Hartley Springs fault, and (b) the local stress and volumetric dilatation changes to understand how fault slip may influence the propagation of a dike towards the surface.

3-D flow and scour near a submerged wing dike: ADCP measurements on the Missouri River

Science.gov (United States)

Jamieson, E.C.; Rennie, C.D.; Jacobson, R.B.; Townsend, R.D.

2011-01-01

Detailed mapping of bathymetry and three-dimensional water velocities using a boat-mounted single-beam sonar and acoustic Doppler current profiler (ADCP) was carried out in the vicinity of two submerged wing dikes located in the Lower Missouri River near Columbia, Missouri. During high spring flows the wing dikes become submerged, creating a unique combination of vertical flow separation and overtopping (plunging) flow conditions, causing large-scale three-dimensional turbulent flow structures to form. On three different days and for a range of discharges, sampling transects at 5 and 20 m spacing were completed, covering the area adjacent to and upstream and downstream from two different wing dikes. The objectives of this research are to evaluate whether an ADCP can identify and measure large-scale flow features such as recirculating flow and vortex shedding that develop in the vicinity of a submerged wing dike; and whether or not moving-boat (single-transect) data are sufficient for resolving complex three-dimensional flow fields. Results indicate that spatial averaging from multiple nearby single transects may be more representative of an inherently complex (temporally and spatially variable) three-dimensional flow field than repeated single transects. Results also indicate a correspondence between the location of calculated vortex cores (resolved from the interpolated three-dimensional flow field) and the nearby scour holes, providing new insight into the connections between vertically oriented coherent structures and local scour, with the unique perspective of flow and morphology in a large river.

Potential Hydrogen Yields from Ultramafic Rocks of the Coast Range Ophiolite and Zambales Ophiolite: Inferences from Mössbauer Spectroscopy

Science.gov (United States)

Stander, A.; Nelms, M.; Wilkinson, K.; Dyar, M. D.; Cardace, D.

2013-12-01

The reduced status of mantle rocks is a possible controller and indicator of deep life habitat, due to interactions between water and ultramafic (Fe, Mg-rich) minerals, which, under reducing conditions, can yield copious free hydrogen, which is an energy source for rock-hosted chemosynthetic life. In this work, Mössbauer spectroscopy was used to parameterize the redox status of Fe in altering peridotites of the Coast Range Ophiolite (CRO) in California, USA and Zambales Ophiolite (ZO) in the Philippines. Fe-bearing minerals were identified and data were collected for the percentages of Fe(III)and Fe(II)and bulk Fe concentration. Thin section analysis shows that relict primary olivines and spinels generally constitute a small percentage of the ZO and CRO rock, and given satisfactory estimates of the volume of the ultramafic units of the ZO and CRO, a stoichiometric H2 production can be estimated. In addition, ZO serpentinites are ~63,000 ppm Fe in bulk samples; they contain ~41-58% Fe(III)and ~23-34% Fe(II) in serpentine and relict minerals along with ~8-30% of the total Fe as magnetite. CRO serpentinites are ~42,000 ppm Fe in bulk samples; they contain ~15-50% Fe(III), ~22-88% Fe(II) in serpentine and relict minerals, and ~0-52% of total Fe is in magnetite (Fe(II)Fe(III)2O4). Assuming stoichiometric production of H2, and given the following representation of serpentinization 2(FeO)rock + H2O → (Fe2O3)rock +H2, we calculated the maximum quantity of hydrogen released and yet to be released through the oxidation of Fe(II). Given that relatively high Fe(III)/Fetotal values can imply higher water:rock ratios during rock alteration (Andreani et al., 2013), we can deduce that ZO ultramafics in this study have experienced a net higher water:rock ratio than CRO ultramafics. We compare possible H2 yields and contrast the tectonic and alteration histories of the selected ultramafic units. (M. Andreani, M. Muñoz, C. Marcaillou, A. Delacour, 2013, μXANES study of iron

An analysis of resistivity monitoring data on the sea dike, Teaan, South Korea

Science.gov (United States)

Song, S. Y.; Nam, M. J.; Cho, S. O.; Lim, S. K.

2017-12-01

Many coastal levees have been constructed within the peninsula of the South Korea to prevent tidal waves from overflowing. For a proper maintenance of the levees, it is important to monitor the embankments from being deteriorated. For the monitoring, this study make a feasibility study on the application of time-lapse (TL) electrical resistivity surveys. The survey can detect anomalies within the embankments, which are possibly generated by defects of facilities or seawater intrusion. Among coastal levees in Korea, we made TL surveys over the Iwon dike located on the Taean-gun, Chungcheongnam-do in the south-west of the South Korea in April 2015. Since visible seepage of the seewater was observed nearby the dike, we conducted monitoring in this area. TL resistivity surveys had been made 11 times for the duration of nine days along a survey line, which located 10 m away from the crest and parallel to the dike. For the analysis and interpretation of the TL data, we first analysed the effects of sea-level variation on the TL electrical resistivity data through numerical simulation. The simulation of TL data are made using dipole-dipole array with an electrode spacing of 3 m along a survey line longer than 100 m. Numerical test showed that it can be difficult to analyse effects of seawater on the dike in single data. So we conducted 4D DC inversion of TL data to analyse spatial distribution of seawater to detect possible seepage region. For the improvement of inversion resolution, we considered a spatial regularization properly representing the characteristics of levees whose major seepage occur across the embankment in order to improve the resolution. In making 4D inversion, we chose several TL data sets which are obtained at a similar conditions, e.g., similar sea level or similar time of a day. From this 4D inversion, we could analyse weak zone to be necessary to monitor continuously.

Dike Strength Analysis on a Regional Scale Based On a Stochastic Subsoil Model

Science.gov (United States)

Koelewijn, A. R.; Vastenburg, E. W.

2013-12-01

About two-third of the Netherlands is protected against flooding by dikes and levees. The subsoil can be characterized by fluvial and marine sediments. Maintaining the safety of these dikes and levees is of vital importance. Insufficient safety is not permissible, but excessive safety would imply a waste of money and other resources. Therefore safety assessments are carried out on a regular basis. Over the past decades, a practice has grown to calculate a limited number of cross-sections, roughly one every 500 to 1000 meters. For this purpose, a representative cross-section is selected as an estimate of the most vulnerable surface geometry and the subsoil conditions determined from boreholes and cone penetration tests, for which slope stability and piping analyses are carried out. This is a time-consuming procedure which is not only expensive, but also neglects geological knowledge. A method to incorporate geological knowledge of an area, including updating on the basis of additional investigations, has been described in Koelewijn et al. [2011]. In addition, various groups have worked to incorporate geotechnical stability models and detailed Lidar-measurements of the surface into a more efficient and rational calculation process [Knoeff et al. 2011, Lam et al. 2013, van den Ham & Mastbergen, 2013]. Combining this experience with the 3D subsoil model opens possibilities for cost-effective additional soil investigations for those locations where ruling out unfavorable conditions really influences the decisions to be made regarding rejection and improvement, see the figure for examples of different subsoil profiles along a dike. The resulting system has been applied for semi-automated calculations of dikes in various parts of the Netherlands, totalling over 4000 km by now, and a part of the Mississippi levee system. [van den Ham & Mastbergen, 2013] G.A. van den Ham & D.R. Mastbergen, A semi-probabilistic assessment method for flow slides. AGU Fall meeting, 2013

Case Study: Wenduine, Belgium : Vulnerability of buildings on a coastal dike

NARCIS (Netherlands)

Chen, X.; Kothuis, Baukje; Kok, Matthijs

2017-01-01

On coastal dikes in Belgium, many residential buildings are found. Most of the old buildings are masonry structures with two to three floors (Figure 1). The ground floors are always elevated (Figure 2), and the entrances of the basements are closed by shutters

Osmium Isotopic Evolution of the Mantle Sources of Precambrian Ultramafic Rocks

Science.gov (United States)

Gangopadhyay, A.; Walker, R. J.

2006-12-01

The Os isotopic composition of the modern mantle, as recorded collectively by ocean island basalts, mid- oceanic ridge basalts (MORB) and abyssal peridotites, is evidently highly heterogeneous (γ Os(I) ranging from +25). One important question, therefore, is how and when the Earth's mantle developed such large-scale Os isotopic heterogeneities. Previous Os isotopic studies of ancient ultramafic systems, including komatiites and picrites, have shown that the Os isotopic heterogeneity of the terrestrial mantle can be traced as far back as the late-Archean (~ 2.7-2.8 Ga). This observation is based on the initial Os isotopic ratios obtained for the mantle sources of some of the ancient ultramafic rocks determined through analyses of numerous Os-rich whole-rock and/or mineral samples. In some cases, the closed-system behavior of these ancient ultramafic rocks was demonstrated via the generation of isochrons of precise ages, consistent with those obtained from other radiogenic isotopic systems. Thus, a compilation of the published initial ^{187}Os/^{188}Os ratios reported for the mantle sources of komatiitic and picritic rocks is now possible that covers a large range of geologic time spanning from the Mesozoic (ca. 89 Ma Gorgona komatiites) to the Mid-Archean (e.g., ca. 3.3 Ga Commondale komatiites), which provides a comprehensive picture of the Os isotopic evolution of their mantle sources through geologic time. Several Precambrian komatiite/picrite systems are characterized by suprachondritic initial ^{187}Os/^{188}Os ratios (e.g., Belingwe, Kostomuksha, Pechenga). Such long-term enrichments in ^{187}Os of the mantle sources for these rocks may be explained via recycling of old mafic oceanic crust or incorporation of putative suprachondritic outer core materials entrained into their mantle sources. The relative importance of the two processes for some modern mantle-derived systems (e.g., Hawaiian picrites) is an issue of substantial debate. Importantly, however, the

Redistribution of Iron and Titanium in High-Pressure Ultramafic Rocks

Science.gov (United States)

Crossley, Rosalind J.; Evans, Katy A.; Reddy, Steven M.; Lester, Gregory W.

2017-11-01

The redox state of iron in high-pressure serpentinites, which host a significant proportion of Fe3+ in subduction zones, can be used to provide an insight into iron cycling and constrain the composition of subduction zone fluids. In this study, we use oxide and silicate mineral textures, interpretation of mineral parageneses, mineral composition data, and whole rock geochemistry of high-pressure retrogressed ultramafic rocks from the Zermatt-Saas Zone to constrain the distribution of iron and titanium, and iron oxidation state. These data provide an insight on the oxidation state and composition of fluids at depth in subduction zones. Oxide minerals host the bulk of iron, particularly Fe3+. The increase in mode of magnetite and observation of magnetite within antigorite veins in the investigated ultramafic samples during initial retrogression is most consistent with oxidation of existing iron within the samples during the infiltration of an oxidizing fluid since it is difficult to reconcile addition of Fe3+ with the known limited solubility of this species. However, high Ti contents are not typical of serpentinites and also cannot be accounted for by simple mixing of a depleted mantle protolith with the nearby Allalin gabbro. Titanium-rich phases coincide with prograde metamorphism and initial exhumation, implying the early seafloor and/or prograde addition and late mobilization of Ti. If Ti addition has occurred, then the introduction of Fe3+, also generally considered to be immobile, cannot be disregarded. We explore possible transport vectors for Ti and Fe through mineral texture analysis.

Crystallisation of mela-aillikites of the Narsaq region, Gardar alkaline province, south Greenland and relationships to other aillikitic carbonatitic associations in the province

Science.gov (United States)

Upton, B. G. J.; Craven, J. A.; Kirstein, L. A.

2006-11-01

Aillikites (carbonated, melilite-free ultramafic lamprophyres grading to carbonatites) are minor components of the Gardar alkaline igneous province. They occur principally as minor intrusions and as clasts in diatremes, but more voluminous aillikitic intrusions crop out near the Ilímaussaq Complex, which they predate by a few million years. These larger intrusions were emplaced at 1160 ± 5 Ma. They are essentially carbonate-free and, consisting almost wholly of ferromagnesian silicate and oxide minerals, are mela-aillikites. Typically the mela-aillikites are fine-grained rocks composed largely of olivine, clinopyroxene, phlogopite and magnetite that crystallised in open systems, permitting loss of volatile-rich residues. The petrography is highly complex, involving at least 28 mineral species. Pyroxenitic veins were emplaced while the host-rocks were still at high temperatures and represent channels through which fluorinated silico-carbonatitic residual melts escaped, with exsolving CO 2 as propellant. Precipitation of Ca-rich minerals including monticellite, perovskite, vesuvianite, wollastonite and cuspidine was a result of dissociation of the calcium carbonate in the residual melts. Late-stage crystallisation was in a highly oxidising environment in which the 'common minerals' attain extreme compositions (almost pure forsterite, ferrian-diopside, highly magnesian ilmenite, Ba-Ti-rich phlogopite and Sr-rich kaersutite). Spatially associated diatremes may be vents through which CO 2-rich gases erupted. The whole-rock compositions are considered to be well removed from those of co-existing melts: compaction and expulsion of highly mobile residual melts is inferred to have left the mela-aillikites as aberrant cumulates. The mela-aillikites are a late-Gardar manifestation of the aillikitic magmatism that occurred intermittently in the province for over 120 Ma. Repetitive formation of metasomite vein systems in the deep lithospheric mantle is postulated. These

Erratum: Correction to: Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes

Science.gov (United States)

Harp, A. G.; Valentine, G. A.

2018-06-01

In the article "Emplacement controls for the basaltic-andesitic radial dikes of Summer Coon volcano and implications for flank vents at stratovolcanoes", the vertical axis for Fig. 8 a was incorrectly labeled (i.e., the value for dikes per km2).

Pre-eruption deformation caused by dike intrusion beneath Kizimen volcano, Kamchatka, Russia, observed by InSAR

Science.gov (United States)

Ji, Lingyun; Lu, Zhong; Dzurisin, Daniel; Senyukov, Sergey

2013-01-01

Interferometric synthetic aperture radar (InSAR) images reveal a pre-eruption deformation signal at Kizimen volcano, Kamchatka, Russia, where an ongoing eruption began in mid-November, 2010. The previous eruption of this basaltic andesite-to-dacite stratovolcano occurred in 1927–1928. InSAR images from both ascending and descending orbital passes of Envisat and ALOS PALSAR satellites show as much as 6 cm of line-of-sight shortening from September 2008 to September 2010 in a broad area centered at Kizimen. About 20 cm of opening of a nearly vertical dike provides an adequate fit to the surface deformation pattern. The model dike is approximately 14 km long, 10 km high, centered 13 km beneath Kizimen, and strikes NE–SW. Time-series analysis of multi-temporal interferograms indicates that (1) intrusion started sometime between late 2008 and July 2009, (2) continued at a nearly constant rate, and (3) resulted in a volume expansion of 3.2 × 107 m3 by September 2010, i.e., about two months before the onset of the 2010 eruption. Earthquakes located above the tip of the dike accompanied the intrusion. Eventually, magma pressure in the dike exceeded the confining strength of the host rock, triggering the 2010 eruption. Our results provide insight into the intrusion process that preceded an explosive eruption at a Pacific Rim stratovolcano following nearly a century of quiescence, and therefore have implications for monitoring and hazards assessment at similar volcanoes elsewhere.

Investigation of the geochemical and mineralogical characteristics of the dikes associated with copper mineralization at the southeastern Ardestan (NE Isfahan

Directory of Open Access Journals (Sweden)

Maryam Salehi

2017-07-01

Full Text Available The Ardestan study area lies in the northeast of Isfahan and at the outer margin of Urumieh -Dokhtar Volcanic Arc (UDMA. In this area, copper mineralization is associated with dikes. Mineralization occurred as sulfides (chalcocite, chalcopyrite and bornite and oxides (malachite and azurite. According to field studies as well as petrographic and geochemical investigations, two different types of dikes are present. The first type, trending NW-SE and comprising fine crystalline gabbro, whereas the second type with relatively E-W trend are gabbro and pyroxene diorite. Geochemically, these rock are characterized by SiO2 = 45.8 to 52.8 wt.%, MgO with 6.9 wt.% (average, Na2O+K2O = 5.6 wt.%, and Al2O3/TiO2 = 16.8%. All dikes are alkaline, related to back-arc tectonic setting in a wider concept associated with changing in source of magmatism. The second type shows enrichment in Ba, Sr, Rb, K, Zr, Nb, Ti, Cr and Ni in comparison to the first type. The first type is generated as a result of a subducted modified mantle while the latter shows an enriched astenospheric mantle source. It appears that there is a weak correlation between ore-forming and volatile elements in the mafic dikes. Overall, the same tectonic stresses are an essential controlling factor for the formation of second type E-W dikes associated with mineralization.

The rheological behavior of fracture-filling cherts: example of Barite Valley dikes, Barberton Greenstone Belt, South Africa

Science.gov (United States)

Ledevin, M.; Arndt, N.; Simionovici, A.

2014-05-01

A 100 m-thick complex of near-vertical carbonaceous chert dikes marks the transition from the Mendon to Mapepe Formations (3260 Ma) in the Barberton Greenstone Belt, South Africa. Fracturing was intense in this area, as shown by the profusion and width of the dikes (ca. 1 m on average) and by the abundance of completely shattered rocks. The dike-and-sill organization of the fracture network and the upward narrowing of some of the large veins indicate that at least part of the fluid originated at depth and migrated upward in this hydrothermal plumbing system. Abundant angular fragments of silicified country rock are suspended and uniformly distributed within the larger dikes. Jigsaw-fit structures and confined bursting textures indicate that hydraulic fracturing was at the origin of the veins. The confinement of the dike system beneath an impact spherule bed suggests that the hydrothermal circulations were triggered by the impact and located at the external margin of a large crater. From the geometry of the dikes and the petrography of the cherts, we infer that the fluid that invaded the fractures was thixotropic. On one hand, the injection of black chert into extremely fine fractures is evidence for low viscosity at the time of injection; on the other hand, the lack of closure of larger veins and the suspension of large fragments in a chert matrix provide evidence of high viscosity soon thereafter. The inference is that the viscosity of the injected fluid increased from low to high as the fluid velocity decreased. Such rheological behavior is characteristic of media composed of solid and colloidal particles suspended in a liquid. The presence of abundant clay-sized, rounded particles of silica, carbonaceous matter and clay minerals, the high proportion of siliceous matrix and the capacity of colloidal silica to form cohesive 3-D networks through gelation, account for the viscosity increase and thixotropic behavior of the fluid that filled the veins. Stirring and

How diking affects the longer-term structure and evolution of divergent plate boundaries

KAUST Repository

Trippanera, Daniele; Acocella, Valerio; Ruch, Joel; Rivalta, Eleonora

2015-01-01

Recurrent diking episodes along divergent plate boundaries, as at Dabbahu (2005, Afar) or at Bardarbunga (2014, Iceland) , highlight the possibility to have m-wide opening in a short time (days to weeks). This suggests a prominent role of magma

A hybrid composite dike suite from the northern Arabian Nubian Shield, southwest Jordan: Implications for magma mixing and partial melting of granite by mafic magma

Science.gov (United States)

Jarrar, Ghaleb H.; Yaseen, Najel; Theye, Thomas

2013-03-01

The Arabian Nubian Shield is an exemplary juvenile continental crust of Neoproterozoic age (1000-542 Ma). The post-collisional rift-related stage (~ 610 to 542 Ma) of its formation is characterized among others by the intrusion of several generations of simple and composite dikes. This study documents a suite of hybrid composite dikes and a natural example of partial melting of granite by a mafic magma from the northernmost extremity of Arabian Nubian Shield in southwest Jordan. The petrogenesis of this suite is discussed on the basis of field, petrographic, geochemical, and Rb/Sr isotopic data. These dikes give spectacular examples of the interaction between basaltic magma and the granitic basement. This interaction ranges from brecciation, partial melting of the host alkali feldspar granite to complete assimilation of the granitic material. Field structures range from intrusive breccia (angular partially melted granitic fragments in a mafic groundmass) to the formation of hybrid composite dikes that are up to 14 m in thickness. The rims of these dikes are trachyandesite (latite) with alkali feldspar ovoids (up to 1 cm in diameter); while the central cores are trachydacite to dacite and again with alkali feldspar ovoids and xenoliths from the dike rims. The granitic xenoliths in the intrusive breccia have been subjected to at least 33% partial melting. A seven-point Rb/Sr isochron from one of these composite dikes yields an age of 561 ± 33 Ma and an initial 87Sr/86Sr ratio of 0.70326 ± 0.0003 (2σ) and MSWD of 0.62. Geochemical modeling using major, trace, rare earth elements and isotopes suggests the generation of the hybrid composite dike suite through the assimilation of 30% to 60% granitic crustal material by a basaltic magma, while the latter was undergoing fractional crystallization at different levels in the continental crust.

The Weakest Link : Spatial Variability in the Piping Failure Mechanism of Dikes

NARCIS (Netherlands)

Kanning, W.

2012-01-01

Piping is an important failure mechanism of flood defense structures. A dike fails due to piping when a head difference causes first the uplift of an inland blanket layer, and subsequently soil erosion due to a ground water flow. Spatial variability of subsoil parameters causes the probability of

Ring faults and ring dikes around the Orientale basin on the Moon.

Science.gov (United States)

Andrews-Hanna, Jeffrey C; Head, James W; Johnson, Brandon; Keane, James T; Kiefer, Walter S; McGovern, Patrick J; Neumann, Gregory A; Wieczorek, Mark A; Zuber, Maria T

2018-08-01

The Orientale basin is the youngest and best-preserved multiring impact basin on the Moon, having experienced only modest modification by subsequent impacts and volcanism. Orientale is often treated as the type example of a multiring basin, with three prominent rings outside of the inner depression: the Inner Rook Montes, the Outer Rook Montes, and the Cordillera. Here we use gravity data from NASA's Gravity Recovery and Interior Laboratory (GRAIL) mission to reveal the subsurface structure of Orientale and its ring system. Gradients of the gravity data reveal a continuous ring dike intruded into the Outer Rook along the plane of the fault associated with the ring scarp. The volume of this ring dike is ~18 times greater than the volume of all extrusive mare deposits associated with the basin. The gravity gradient signature of the Cordillera ring indicates an offset along the fault across a shallow density interface, interpreted to be the base of the low-density ejecta blanket. Both gravity gradients and crustal thickness models indicate that the edge of the central cavity is shifted inward relative to the equivalent Inner Rook ring at the surface. Models of the deep basin structure show inflections along the crust-mantle interface at both the Outer Rook and Cordillera rings, indicating that the basin ring faults extend from the surface to at least the base of the crust. Fault dips range from 13-22° for the Cordillera fault in the northeastern quadrant, to 90° for the Outer Rook in the northwestern quadrant. The fault dips for both outer rings are lowest in the northeast, possibly due to the effects of either the direction of projectile motion or regional gradients in pre-impact crustal thickness. Similar ring dikes and ring faults are observed around the majority of lunar basins.

Geochemical characteristics of mafic and ultramafic rocks from the Naga Hills Ophiolite, India: Implications for petrogenesis

Directory of Open Access Journals (Sweden)

Ajoy Dey

2018-03-01

Full Text Available The Naga Hills Ophiolite (NHO represents one of the fragments of Tethyan oceanic crust in the Himalayan Orogenic system which is exposed in the Phek and Kiphire districts of Nagaland, India. The NHO is composed of partially serpentinized dunite, peridotite, gabbro, basalt, minor plagiogranite, diorite dyke and marine sediments. The basalts are mainly composed of fine grained plagioclase feldspar, clinopyroxene and orthopyroxene and show quenching and variolitic textures. The gabbros are characterized by medium to coarse grained plagioclase, orthopyroxene and clinopyroxene with ophitic to sub-ophitic textures. The ultramafic cumulates are represented by olivine, Cpx and Opx. Geochemically, the basalts and gabbros are sub-alkaline to alkaline and show tholeiitic features. The basalts are characterized by 44.1–45.6 wt.% of SiO2 with 28–38 of Mg#, and the gabbros by 38.7–43.7 wt.% of SiO2, and 26–79 of Mg#. The ultramafic rocks are characterized by 37.4–52.2 wt.% of SiO2, and 80–88 of Mg#. In multi-element diagrams (spidergrams both basalts and gabbros show fractionated trends with strong negative anomalies of Zr, Nb, Sr and a gentle negative anomaly of P. However, the rare earth element (REE plots of the basalts and gabbros show two distinct patterns. The first pattern, represented by light REE (LREE depletion, suggests N-MORB features and can be interpreted as a signature of Paleo-Tethyan oceanic crust. The second pattern, represented by LREE enrichment with negligible negative Eu anomaly, conforms to E-MORB, and may be related to an arc tectonic setting. In V vs. Ti/1000, Cr vs. Y and AFM diagrams, the basalts and gabbros plot within Island Arc Tholeiite (IAT and MORB fields suggesting both ridge and arc related settings. The ultramafic rocks exhibit two distinct patterns both in spidergrams and in REE plots. In the spidergram, one group displays highly enriched pattern, whereas the other group shows near flat pattern compared

Weathering and vegetation controls on nickel isotope fractionation in surface ultramafic environments (Albania)

Science.gov (United States)

Estrade, Nicolas; Cloquet, Christophe; Echevarria, Guillaume; Sterckeman, Thibault; Deng, Tenghaobo; Tang, YeTao; Morel, Jean-Louis

2015-08-01

The dissolved nickel (Ni) isotopic composition of rivers and oceans presents an apparent paradox. Even though rivers represent a major source of Ni in the oceans, seawater is more enriched in the heavier isotopes than river-water. Additional sources or processes must therefore be invoked to account for the isotopic budget of dissolved Ni in seawater. Weathering of continental rocks is thought to play a major role in determining the magnitude and sign of isotopic fractionation of metals between a rock and the dissolved product. We present a study of Ni isotopes in the rock-soil-plant systems of several ultramafic environments. The results reveal key insights into the magnitude and the control of isotopic fractionation during the weathering of continental ultramafic rocks. This study introduces new constraints on the influence of vegetation during the weathering process, which should be taken into account in interpretations of the variability of Ni isotopes in rivers. The study area is located in a temperate climate zone within the ophiolitic belt area of Albania. The serpentinized peridotites sampled present a narrow range of heavy Ni isotopic compositions (δ60Ni = 0.25 ± 0.16 ‰, 2SD n = 2). At two locations, horizons within two soil profiles affected by different degrees of weathering all presented light isotopic compositions compared to the parent rock (Δ60Nisoil-rock up to - 0.63 ‰). This suggests that the soil pool takes up the light isotopes, while the heavier isotopes remain in the dissolved phase. By combining elemental and mineralogical analyses with the isotope compositions determined for the soils, the extent of fractionation was found to be controlled by the secondary minerals formed in the soil. The types of vegetation growing on ultramafic-derived soils are highly adapted and include both Ni-hyperaccumulating species, which can accumulate several percent per weight of Ni, and non-accumulating species. Whole-plant isotopic compositions were found

Uncertainty assessment of a dike with an anchored sheet pile wall using FEM

NARCIS (Netherlands)

Rippi, Aikaterini; Nuttall, Jonathan; Teixeira, Ana; Schweckendiek, T.; Lang, M.; Klijn, F.; Samuels, P.

2016-01-01

The Dutch design codes for the dikes with retaining walls rely on Finite Element Analysis (FEM) in combination with partial safety factors. However, this can lead to conservative designs. For this reason, in this study, a reliability analysis is carried out with FEM calculations aiming to

Lunar floor-fractured craters: Modes of dike and sill emplacement and implications of gas production and intrusion cooling on surface morphology and structure

Science.gov (United States)

Wilson, Lionel; Head, James W.

2018-05-01

Lunar floor-fractured craters (FFCs) represent the surface manifestation of a class of shallow crustal intrusions in which magma-filled cracks (dikes) rising to the surface from great depth encounter contrasts in host rock lithology (breccia lens, rigid solidified melt sheet) and intrude laterally to form a sill, laccolith or bysmalith, thereby uplifting and deforming the crater floor. Recent developments in the knowledge of lunar crustal thickness and density structure have enabled important revisions to models of the generation, ascent and eruption of magma, and new knowledge about the presence and behavior of magmatic volatiles has provided additional perspectives on shallow intrusion processes in FFCs. We use these new data to assess the processes that occur during dike and sill emplacement with particular emphasis on tracking the fate and migration of volatiles and their relation to candidate venting processes. FFCs result when dikes are capable of intruding close to the surface, but fail to erupt because of the substructure of their host impact craters, and instead intrude laterally after encountering a boundary where an increase in ductility (base of breccia lens) or rigidity (base of solidified melt sheet) occurs. Magma in dikes approaching the lunar surface experiences increasingly lower overburden pressures: this enhances CO gas formation and brings the magma into the realm of the low pressure release of H2O and sulfur compounds, both factors adding volatiles to those already collected in the rising low-pressure part of the dike tip. High magma rise velocity is driven by the positive buoyancy of the magma in the part of the dike remaining in the mantle. The dike tip overshoots the interface and the consequent excess pressure at the interface drives the horizontal flow of magma to form the intrusion and raise the crater floor. If sill intrusion were controlled by the physical properties at the base of the melt sheet, dikes would be required to approach to

A transitional alkalic dolerite dike suite of Mesozoic age in Southeastern New England

Science.gov (United States)

Hermes, O. Don; Rao, J. M.; Dickenson, M. P.; Pierce, T. A.

1984-12-01

Dike rocks from the New England platform of Rhode Island and adjacent Massachusetts consist of premetamorphic and post-metamorphic suites. The older group includes metamorphosed dolerite, minette, and schistose dioritic rocks. Post-metamorphic dikes consist of dolerite and sparse monchiquite. The post-metamorphic dolerites are of comparable age to the Eastern North American dolerite suite associated with the Mesozoic basins along the eastern seaboard of North America. However, the southeastern New England dolerites exhibit mineralogy and chemistry more typical of a transitional alkalic suite compared to the more subalkalic tholeiitic dolerites of the Eastern North American suite. Both suites are compatible with a rift tectonic setting, but the more alkalic dolerites may represent a deeper source of small volume melts compared to the Eastern North American dolerites. These more alkaline melts may have concentrated at local centers, or they may be typical of flank dolerites as opposed to the less alkalic varieties that occur within the central axial rift.

Experimental Investigation on the Scour Hole Geometric Dimensions in Different Spur Dikes in 90 Degree Bend for Non-Submerged Conditions

Directory of Open Access Journals (Sweden)

somayeh rahimi

2017-06-01

Full Text Available Introduction: Outer bank region is always exposed to destruction and scour due to secondary flow. Different methods are generally used to protect the outer bank. One of the most common and economical ways is spur dike. As an obstacle in the flow, spur dikes protect the outer bank through decreasing the velocity and forming vortexes between them and as a result sedimentation along that area. However, the spur dike increases the shear stress and local scour around the spur, especially its nose.. This study investigates the scour hole dimensions around three types of spur dike including permeable, impermeable and bandal-like spur dike which is done as a combination of permeable and impermeable spur dike. Few studies were focused on field applications and laboratory experiments to investigate the practical applicability of the bandal-like structure in natural rivers. Rahman et al. (4 Studied the prediction of main channel degradation and local scour around hydraulic structures (impermeable and bandal-like spur dikes under non-submerged condition. Teraguchi et al. (9 Investigated the influenced of submerged condition on flow characteristics and sediment transport process caused by bandal-like structures with different spacing and alignment under live-bed scour condition through laboratory experiments. Materials and Methods: Experiments were carried out in the Physical Modeling Laboratory of Faculty of Water Science Engineering of Shahid Chamran University, Ahwaz. The main channel consisted of a 5m long upstream and a 3m long downstream straight reaches. A 90 degree bend was located between the two straight reach. The channel was of rectangular cross section, having a width of 0.7m and depth of 0.6m, with mild bends (ratio of radius to a width equal to 4 and it was filled with almost uniform sediment with a median particle size of D50=1.5 mm. The discharges were measured using an ultrasonic flow meter, which was installed on the pipe inlet of the

Effect of inflow discharges on the development of matric suction and volumetric water content for dike during overtopping tests

Science.gov (United States)

Hassan, Marwan A.; Ismail, Mohd A. M.

2017-10-01

The point of this review is to depict the impact of various inflow discharge rate releases on the instruments of matric suction and volumetric water content during an experimental test of spatial overtopping failure at school of civil engineering in universiti Sains of Malaysia. A dry sand dike was conducted inside small flume channel with twelve sensors of tensiometer and Time-Domain Reflectometer (TDR). Instruments are installed in the soil at different locations in downstream and upstream slopes of the dike for measuring the response of matric suction and volumetric water content, respectively. Two values of inflow discharge rates of 30 and 40 L/min are utilized as a part of these experiments to simulate the effectiveness of water reservoirs in erosion mechanism. The outcomes demonstrate that the matric suction and volumetric water content are decreased and increased, respectively for both inflow discharges. The higher inflow discharges accelerate the saturation of dike soil and the erosion process faster than that for the lower inflow discharges.

Geology and petrography of basement in south extreme in Sierra Grande de San Luis, Argentina

International Nuclear Information System (INIS)

Morosini, A.; Ortiz Suarez, A.

2007-01-01

In the south of the Sierra de San Luis is recognized a basement composed by La Escalerilla and Los Puquios granites, accompanied by schist, mylonite s and mafic-ultramafic rocks. The schists, La Escalerilla granite and the mafic -ultramafic rocks are affected by a regional metamorphism in anphibolites facies, the two first present a N-S foliation di ping to east. The mylonite s correspond to a second event of deformation, distributed in thin belts of NNE-SSO direction and inclination to east, developed in green schist to anphibolites facies. Los Puquios granite represents the more young of the basement rocks and the intrusion was associated with a shear zone. Los Puquios granite forms dikes and small plutons cutting La Escalerilla granite and micas chits in high cortical levels

A Jurassic Shock-Aftershock Earthquake Sequence Recorded by Small Clastic Pipes and Dikes within Dune Cross-Strata, Zion National Park, Utah

Science.gov (United States)

Loope, D. B.; Zlotnik, V. A.; Kettler, R. M.; Pederson, D. T.

2012-12-01

Eolian sandstones of south-central and southeast Utah contain large volumes of contorted cross-strata that have long been recognized as products of liquefaction caused by seismic shaking. Unlike most sites where Navajo Sandstone is exposed, in Zion National Park (southwestern Utah), the Navajo contains very, very few contorted strata. We have, however, mapped the distribution of more than 1,000 small-scale, vertical pipes and dikes in uncontorted cross-strata of the Navajo at two small study sites in Zion. Pipes are 2-5 cm in diameter and up to 3 m long; dikes are ~6 cm wide. Clusters of the water-escape structures lie directly above and below numerous, near-horizontal bounding surfaces. Dikes are restricted to the wind-ripple strata that lie above the bounding surfaces. Pipes are common both above and below the bounding surfaces. In map view, most pipes are arranged in lines. Near the bounding surfaces, pipes merge upward with shallow dikes trending parallel to the lines of pipes. Pipes formed in grainflows—homogeneous, well-sorted sand lacking cohesion. Dikes formed above the bounding surface, in more-cohesive, poorly sorted, wind-ripple strata. As liquefaction began, expansion of subsurface sand caused spreading within the unliquified (capping) beds near the land surface. Dikes intruded cracks in the wind-ripple strata, and pipes rose from the better-sorted sand to interdune surfaces, following trends of cracks. Because the wind-ripple strata had low cohesive strength, a depression formed around each rupture, and ejected sand built upward to a flat-topped surface rather than forming the cone of a classic sand volcano. In one 3 m2 portion of the map area, a cluster of about 20 pipes and dikes, many with truncated tops, record eight stratigraphically distinct seismic events. The large dunes that deposited the Navajo cross-strata likely moved ~1m/yr. When, in response to seismic shaking, a few liters of fluidized sand erupted onto the lowermost portion of the

Environmental and Geographical Factors Structure Soil Microbial Diversity in New Caledonian Ultramafic Substrates: A Metagenomic Approach.

Directory of Open Access Journals (Sweden)

Véronique Gourmelon

Full Text Available Soil microorganisms play key roles in ecosystem functioning and are known to be influenced by biotic and abiotic factors, such as plant cover or edaphic parameters. New Caledonia, a biodiversity hotspot located in the southwest Pacific, is one-third covered by ultramafic substrates. These types of soils are notably characterised by low nutrient content and high heavy metal concentrations. Ultramafic outcrops harbour diverse vegetation types and remarkable plant diversity. In this study, we aimed to assess soil bacterial and fungal diversity in New Caledonian ultramafic substrates and to determine whether floristic composition, edaphic parameters and geographical factors affect this microbial diversity. Therefore, four plant formation types at two distinct sites were studied. These formations represent different stages in a potential chronosequence. Soil cores, according to a given sampling procedure, were collected to assess microbial diversity using a metagenomic approach, and to characterise the physico-chemical parameters. A botanical inventory was also performed. Our results indicated that microbial richness, composition and abundance were linked to the plant cover type and the dominant plant species. Furthermore, a large proportion of Ascomycota phylum (fungi, mostly in non-rainforest formations, and Planctomycetes phylum (bacteria in all formations were observed. Interestingly, such patterns could be indicators of past disturbances that occurred on different time scales. Furthermore, the bacteria and fungi were influenced by diverse edaphic parameters as well as by the interplay between these two soil communities. Another striking finding was the existence of a site effect. Differences in microbial communities between geographical locations may be explained by dispersal limitation in the context of the biogeographical island theory. In conclusion, each plant formation at each site possesses is own microbial community resulting from

Jurassic-Paleogene intra-oceanic magmatic evolution of the Ankara Mélange, North-Central Anatolia, Turkey

Science.gov (United States)

Sarifakioglu, E.; Dilek, Y.; Sevin, M.

2013-11-01

Oceanic rocks in the Ankara Mélange along the Izmir-Ankara-Erzincan suture zone (IAESZ) in North-Central Anatolia include locally coherent ophiolite complexes (~179 Ma and ~80 Ma), seamount or oceanic plateau volcanic units with pelagic and reefal limestones (96.6 ± 1.8 Ma), metamorphic rocks with ages of 187.4 ± 3.7 Ma, 158.4 ± 4.2 Ma, and 83.5 ± 1.2 Ma, and subalkaline to alkaline volcanic and plutonic rocks of an island arc origin (~67-63 Ma). All but the arc rocks occur in a shaly-graywacke and/or serpentinite matrix, and are deformed by south-vergent thrust faults and folds that developed in the Middle to Late Eocene due to continental collisions in the region. Ophiolitic volcanic rocks have mid-ocean ridge (MORB) and island arc tholeiite (IAT) affinities showing moderate to significant LILE enrichment and depletion in Nb, Hf, Ti, Y and Yb, which indicate the influence of subduction-derived fluids in their melt evolution. Seamount/oceanic plateau basalts show ocean island basalt (OIB) affinities. The arc-related volcanic rocks, lamprophyric dikes and syeno-dioritic plutons exhibit high-K shoshonitic to medium-to high-K calc-alkaline compositions with strong enrichment in LILE, REE and Pb, and initial ϵNd values between +1.3 and +1.7. Subalkaline arc volcanic units occur in the northern part of the mélange, whereas the younger alkaline volcanic rocks and intrusions (lamprophyre dikes and syeno-dioritic plutons) in the southern part. The Early to Late Jurassic and Late Cretaceous epidote-actinolite, epidote-chlorite and epidote-glaucophane schists represent the metamorphic units formed in a subduction channel in the Northern Neotethys. The Middle to Upper Triassic neritic limestones spatially associated with the seamount volcanic rocks indicate that the Northern Neotethys was an open ocean with its MORB-type oceanic lithosphere by the Early Triassic. The Latest Cretaceous-Early Paleocene island arc volcanic, dike and plutonic rocks with

Wind turbines along highways and on the dikes Houtribdijk and Afsluitdijk in the Netherlands. Windmolens langs autosnelwegen en op de waterkeringen Houtribdijk en Afsluitdijk

Energy Technology Data Exchange (ETDEWEB)

Johanson, J C.P.; Meesters, H J.N.

1993-10-29

Attention is paid to the safety, control and maintenance of dikes with regard to the placing of wind turbines on the dikes, as mentioned in the title. Also the possible damage to the bird population and the visual impact of wind turbines are dealt with. 5 refs.

IJsselmij realises Europe's largest windfarm (7,5 MW) on the dike of the Noordoostpolder

Energy Technology Data Exchange (ETDEWEB)

Paes, H F; Nauta, Y

1988-01-01

IJsselmij is an energy distribution company in the eastern part of the Netherlands. The company realized in 1987 a 7.5 MW windfarm along the IJsselmeer-dike north of Urk village. The windfarm, erected in the Noordoostpolder at the inside of the dike, consists of 25 wind turbines with a rotordiameter of 25 meters and a rated power of 300 kW each. The total investment will be 23 million Dutch guilders. Successively the following items with regard to the project are discussed: selection of the location for the wind turbines; construction of the foundations; description of the wind turbines; the electric connection of the wind turbine transformers to the grid; the data-communication system which consists of the wind turbine computer and the central computer in the control building; financial-economical aspects and aspects on sound and birds. Finally technical specifications of the windfarm are given. 6 figs., 1 ref.

Changes in optical properties, chemistry, and micropore and mesopore characteristics of bituminous coal at the contact with dikes in the Illinois Basin

Science.gov (United States)

Mastalerz, Maria; Drobniak, A.; Schimmelmann, A.

2009-01-01

Changes in high-volatile bituminous coal (Pennsylvanian) near contacts with two volcanic intrusions in Illinois were investigated with respect to optical properties, coal chemistry, and coal pore structure. Vitrinite reflectance (Ro) increases from 0.62% to 5.03% within a distance of 5.5??m from the larger dike, and from 0.63% to 3.71% within 3.3??m from the small dike. Elemental chemistry of the coal shows distinct reductions in hydrogen and nitrogen content close to the intrusions. No trend was observed for total sulfur content, but decreases in sulfate content towards the dikes indicate thermochemical sulfate reduction (TSR). Contact-metamorphism has a dramatic effect on coal porosity, and microporosity in particular. Around the large dike, the micropore volume, after a slight initial increase, progressively decreases from 0.0417??cm3/g in coal situated 4.7??m from the intrusive contact to 0.0126??cm3/g at the contact. Strongly decreasing mesopore and micropore volumes in the altered zone, together with frequent cleat and fracture filling by calcite, indicate deteriorating conditions for both coalbed gas sorption and gas transmissibility. ?? 2008 Elsevier B.V. All rights reserved.

Petrogenesis of Early Cretaceous dioritic dikes in the Shanyang-Zhashui area, South Qinling, central China: Evidence for partial melting of thickened lower continental crust

Science.gov (United States)

Chen, Lei; Yan, Zhen; Wang, Zongqi; Wang, Kunming

2018-06-01

The dioritic dikes distributed in the Shanyang-Zhashui area of the South Qinling region play an important role in understanding the deep magmatic processes and tectonic evolution during the orogenic process. The zircon Usbnd Pb ages of the dioritic dikes indicate that they were emplaced at ∼144 Ma and therefore postdate the dikes that formed in the intracontinental orogenic background after the continental collision between the North China Block (NCB) and the South China Block (SCB). The dioritic dikes have SiO2 contents of 56.86-64.93 wt%; K2O contents of 1.65-3.21 wt%; low MgO (1.50-2.66 wt%), Y (14.4-25.5 ppm) and heavy rare earth element (HREE) contents; low Mg# values (39.9-49); high Sr contents (528-4833 ppm); and high Sr/Y ratios (32.8-189). They exhibit highly fractionated REE and flat HREE patterns, strong enrichment in large ion lithophile elements (LILEs; e.g., Rb, Ba, and U) and depletion in high field strength elements (HFSEs) (e.g., Nb), as well as positive Sr and negative Ti anomalies. Furthermore, these dioritic dikes exhibit (87Sr/86Sr)i ratios ranging from 0.7048 to 0.7083, εNd(t) values ranging from -3.3 to -1.4, and εHf(t) values ranging from -4.1 to 1.6. The geochemical patterns of the dioritic dikes indicate that they possess adakitic characteristics. Moreover, the low MgO contents, Mg# values, Ni contents, Th/Ce ratios, and Srsbnd Ndsbnd Hf isotopic features all indicate that these dioritic dikes were generated by the partial melting of thickened mafic lower crust. The high La/Yb and Sr/Y ratios, low Y and Yb contents, absence of significant Eu anomalies, flat HREE patterns, and low Nb/Ta ratios of these rocks suggest that the adakitic melts were derived from the melting of garnet-bearing amphibolite. The geochronologic, elemental and isotopic evidence suggests that the dioritic dikes may have formed in a locally extensional environment within an overall N-S compressional setting or during the transition from compressional to extensional

Down and Out at Pacaya Volcano: A Glimpse of Magma Storage and Diking as Interpreted From GPS Geodesy

Science.gov (United States)

Lechner, H. N.; Waite, G. P.; Wauthier, D. C.; Escobar-Wolf, R. P.; Lopez-Hetland, B.

2017-12-01

Geodetic data from an eight-station GPS network at Pacaya volcano Guatemala allows us to produce a simple analytical model of deformation sources associated with the 2010 eruption and the eruptive period in 2013-2014. Deformation signals for both eruptive time-periods indicate downward vertical and outward horizontal motion at several stations surrounding the volcano. The objective of this research was to better understand the magmatic plumbing system and sources of this deformation. Because this down-and-out displacement is difficult to explain with a single source, we chose a model that includes a combination of a dike and spherical source. Our modelling suggests that deformation is dominated the inflation of a shallow dike seated high within the volcanic edifice and deflation of a deeper, spherical source below the SW flank of the volcano. The source parameters for the dike feature are in good agreement with the observed orientation of recent vent emplacements on the edifice as well the horizontal displacement, while the parameters for a deeper spherical source accommodate the downward vertical motion. This study presents GPS observations at Pacaya dating back to 2009 and provides a glimpse of simple models of possible deformation sources.

Morphology versus U-Pb systematics in zircon: A high-resolution isotopic study of a zircon population from a Variscan dike in the Central Alps

International Nuclear Information System (INIS)

Bossart, P.J.; Meier, M.; Oberli, F.; Steiger, R.H.

1986-01-01

U/Pb isotopic measurements on individual zircon crystals combined with morphological analyses permit the identification of three distinct components within the zircon population of the Saedelhorn diorite, a Variscan dike from the western Gotthard (Central Alps, Switzerland): (i) 94% of the grains in the zircon population are elongate crystals with pronounced skeletal morphology indicative of rapid growth from a supercooled melt. (ii) 5% of the population consist of turbid, mostly subhedral zircons frequently showing D-type morphology and elevated uranium contents compared to the skeletal variety. Single-crystal and multi-grain U-Pb isotopic data of group (i) and (ii) zircons define an intrusion age of 293 + 5/ -4 m.y. for the dike. (iii) Rare, transparent zircon crystals (< 1% of the zircons population) yield apparent U-Pb ages in the range of 370-490 m.y. and display morphological and isotopic characteristics closely resembling those of a Caledonian orthogneiss intruded by the dike. This implies presence of assimilated wall-rock components in the macroscopically homogeneous dike sample. (orig./WB)

The basic and ultrabasic dikes from the coast region between the Sao Sebastiao and Ubatuba cities, Sao Paulo State, SP, Brazil; Os diques basicos e ultrabasicos da regiao costeira entre as cidades de Sao Sebastiao e Ubatuba, estado de Sao Paulo, SP, Brasil

Energy Technology Data Exchange (ETDEWEB)

Garda, Gianna Maria

1995-12-31

The coastline between Sao Sebastiao and Ubatuba cities and the shores of Sao Sebastiao, Anchieta and Mar Virado islands (Sao Paulo State, Brazil) are crosscut by several small swarms and isolated dykes trending N55E. The main rock types range from basic to intermediate, but also a conspicuous variety of alkaline lamprophyres occur side by side with the main group. The thickness of the basic to intermediate dykes vary widely, from a few centimeters to several metres, while the lamprophyres are a few tens of centimeters thick. The objective of this thesis is the petrographic, mineralogic, petrochemical and isotopic characterization of the basic and ultrabasic dykes that occur between the Sao Sebastiao and Ubatuba cities (State of Sao Paulo), also including some occurrences from the Sao Sebastiao, Mar Virado and Anchieta islands and from the Bairro Alto region (Folha de Natividade da Serra). The petrogenetic model presented is based in the national and international bibliography. (author) 146 refs., 44 figs., 24 tabs.

The basic and ultrabasic dikes from the coast region between the Sao Sebastiao and Ubatuba cities, Sao Paulo State, SP, Brazil; Os diques basicos e ultrabasicos da regiao costeira entre as cidades de Sao Sebastiao e Ubatuba, estado de Sao Paulo, SP, Brasil

Energy Technology Data Exchange (ETDEWEB)

Garda, Gianna Maria

1996-12-31

The coastline between Sao Sebastiao and Ubatuba cities and the shores of Sao Sebastiao, Anchieta and Mar Virado islands (Sao Paulo State, Brazil) are crosscut by several small swarms and isolated dykes trending N55E. The main rock types range from basic to intermediate, but also a conspicuous variety of alkaline lamprophyres occur side by side with the main group. The thickness of the basic to intermediate dykes vary widely, from a few centimeters to several metres, while the lamprophyres are a few tens of centimeters thick. The objective of this thesis is the petrographic, mineralogic, petrochemical and isotopic characterization of the basic and ultrabasic dykes that occur between the Sao Sebastiao and Ubatuba cities (State of Sao Paulo), also including some occurrences from the Sao Sebastiao, Mar Virado and Anchieta islands and from the Bairro Alto region (Folha de Natividade da Serra). The petrogenetic model presented is based in the national and international bibliography. (author) 146 refs., 44 figs., 24 tabs.

Consideration of the ultramafic intrusive rocks in Arroyo Las Palmas (ex Cerro Chato - Las Canias) Durazno. R. O. del Uruguay

International Nuclear Information System (INIS)

Coronel, N.

1987-01-01

This work is about the ultramafic rocks which its chemistry composition fluctuate since the basic to the ultra basic field and appear in the nascent of the Las Palmas stream near Las Canias and Cerro Chato district.

Field geology, geochronology and geochemistry of mafic-ultramafic rocks from Alxa, China: Implications for Late Permian accretionary tectonics in the southern Altaids

Science.gov (United States)

Feng, Jianyun; Xiao, Wenjiao; Windley, Brian; Han, Chunming; Wan, Bo; Zhang, Ji'en; Ao, Songjian; Zhang, Zhiyong; Lin, Lina

2013-12-01

The time of termination of orogenesis for the southern Altaids has been controversial. Systematic investigations of field geology, geochronology and geochemistry on newly discriminated mafic-ultramafic rocks from northern Alxa in the southern Altaids were conducted to address the termination problem. The mafic-ultramafic rocks are located in the Bijiertai, Honggueryulin, and Qinggele areas, stretching from west to east for about 100 km. All rocks occur high-grade gneisses as tectonic lenses that are composed of peridotite, pyroxenite, gabbro, and serpentinite, most of which have undergone pronounced alteration, i.e., serpentinization and chloritization. Geochemically, the rocks are characterized by uniform compositional trends, i.e., with low SiO2-contents (42.51-52.21 wt.%) and alkalinity (Na2O + K2O) (0.01-5.45 wt.%, mostly less than 0.8 wt.%), and enrichments in MgO (7.37-43.36 wt.%), with Mg# = 52.75-91.87. As the rocks have been strongly altered and have a wide range of loss-on-ignition (LOI: 0.44-14.07 wt.%) values, they may have been subjected to considerable alteration by either seawater or metamorphic fluids. The REE and trace element patterns show a relatively fractionated trend with LILE enrichment and HFSE depletion, similar to that of T-MORB between N-MORB and E-MORB, indicating that the parental melt resulted from the partial melting of oceanic lithospheric mantle overprinted by fluid alteration of island-arc origin. The ultramafic rocks are relics derived from the magma after a large degree of partial melting of oceanic lithospheric mantle with superposed island arc processes under the influence of mid-ocean-ridge magmatism. LA-ICP MS U-Pb zircon ages of gabbros from three spots are 274 ± 3 Ma (MSWD = 0.35), 306 ± 3 Ma (MSWD = 0.49), 262 ± 5 Ma (MSWD = 1.2), respectively, representing the formation ages of the mafic-ultramafic rocks. Therefore, considering other previously published data, we suggest that the mafic-ultramafic rocks were products of

Bacterially Induced Weathering of Ultramafic Rock and Its Implications for Phytoextraction

Science.gov (United States)

Kidd, Petra; Kuffner, Melanie; Prieto-Fernández, Ángeles; Hann, Stephan; Monterroso, Carmela; Sessitsch, Angela; Wenzel, Walter; Puschenreiter, Markus

2013-01-01

The bioavailability of metals in soil is often cited as a limiting factor of phytoextraction (or phytomining). Bacterial metabolites, such as organic acids, siderophores, or biosurfactants, have been shown to mobilize metals, and their use to improve metal extraction has been proposed. In this study, the weathering capacities of, and Ni mobilization by, bacterial strains were evaluated. Minimal medium containing ground ultramafic rock was inoculated with either of two Arthrobacter strains: LA44 (indole acetic acid [IAA] producer) or SBA82 (siderophore producer, PO4 solubilizer, and IAA producer). Trace elements and organic compounds were determined in aliquots taken at different time intervals after inoculation. Trace metal fractionation was carried out on the remaining rock at the end of the experiment. The results suggest that the strains act upon different mineral phases. LA44 is a more efficient Ni mobilizer, apparently solubilizing Ni associated with Mn oxides, and this appeared to be related to oxalate production. SBA82 also leads to release of Ni and Mn, albeit to a much lower extent. In this case, the concurrent mobilization of Fe and Si indicates preferential weathering of Fe oxides and serpentine minerals, possibly related to the siderophore production capacity of the strain. The same bacterial strains were tested in a soil-plant system: the Ni hyperaccumulator Alyssum serpyllifolium subsp. malacitanum was grown in ultramafic soil in a rhizobox system and inoculated with each bacterial strain. At harvest, biomass production and shoot Ni concentrations were higher in plants from inoculated pots than from noninoculated pots. Ni yield was significantly enhanced in plants inoculated with LA44. These results suggest that Ni-mobilizing inoculants could be useful for improving Ni uptake by hyperaccumulator plants. PMID:23793627

Nation-building Behind the Dike: Dutch Nationalism and the Visual Culture of Hydraulic Engineering

NARCIS (Netherlands)

Ensel, R.

2017-01-01

This article charts a crucial chapter in the history of Dutch nationalism, i. e. the topic of ‘water management’, by delving into the debate on the construction of the Afsluitdijk. The closure of the Zuiderzee by the construction of a dike is one of the most significant infrastructural projects of

Geodetic evidence for en echelon dike emplacement and concurrent slow slip during the June 2007 intrusion and eruption at Kīlauea volcano, Hawaii

Science.gov (United States)

Montgomery-Brown, E. K.; Sinnett, D.K.; Poland, M.; Segall, P.; Orr, T.; Zebker, H.; Miklius, Asta

2010-01-01

A series of complex events at Kīlauea Volcano, Hawaii, 17 June to 19 June 2007, began with an intrusion in the upper east rift zone (ERZ) and culminated with a small eruption (1500 m3). Surface deformation due to the intrusion was recorded in unprecedented detail by Global Positioning System (GPS) and tilt networks as well as interferometric synthetic aperture radar (InSAR) data acquired by the ENVISAT and ALOS satellites. A joint nonlinear inversion of GPS, tilt, and InSAR data yields a deflationary source beneath the summit caldera and an ENE-striking uniform-opening dislocation with ~2 m opening, a dip of ∼80° to the south, and extending from the surface to ~2 km depth. This simple model reasonably fits the overall pattern of deformation but significantly misfits data near the western end of an inferred dike-like source. Three more complex dike models are tested that allow for distributed opening including (1) a dike that follows the surface trace of the active rift zone, (2) a dike that follows the symmetry axis of InSAR deformation, and (3) two en echelon dike segments beneath mapped surface cracks and newly formed steaming areas. The en echelon dike model best fits near-field GPS and tilt data. Maximum opening of 2.4 m occurred on the eastern segment beneath the eruptive vent. Although this model represents the best fit to the ERZ data, it still fails to explain data from a coastal tiltmeter and GPS sites on Kīlauea's southwestern flank. The southwest flank GPS sites and the coastal tiltmeter exhibit deformation consistent with observations of previous slow slip events beneath Kīlauea's south flank, but inconsistent with observations of previous intrusions. Slow slip events at Kīlauea and elsewhere are thought to occur in a transition zone between locked and stably sliding zones of a fault. An inversion including slip on a basal decollement improves fit to these data and suggests a maximum of ~15 cm of seaward fault motion, comparable to previous slow

Modeling Thermal Pressurization Around Shallow Dikes Using Temperature-Dependent Hydraulic Properties: Implications for Deformation Around Intrusions

Science.gov (United States)

Townsend, Meredith R.

2018-01-01

Pressurization and flow of groundwater around igneous intrusions depend in part on the hydraulic diffusivity of the host rocks and processes that enhance diffusivity, such as fracturing, or decrease diffusivity, such as mineral precipitation during chemical alteration. Characterizing and quantifying the coupled effects of alteration, pore pressurization, and deformation have significant implications for deformation around intrusions, geothermal energy, contact metamorphism, and heat transfer at mid-ocean ridges. Fractures around dikes at Ship Rock, New Mexico, indicate that pore pressures in the host rocks exceeded hydrostatic conditions by at least 15 MPa following dike emplacement. Hydraulic measurements and petrographic analysis indicate that mineral precipitation clogged the pores of the host rock, reducing porosity from 0.25 to reducing permeability by 5 orders of magnitude. Field data from Ship Rock are used to motivate and constrain numerical models for thermal pore fluid pressurization adjacent to a meter-scale dike, using temperature-dependent hydraulic properties in the host rock as a proxy for porosity loss by mineral precipitation during chemical alteration. Reduction in permeability by chemical alteration has a negligible effect on pressurization. However, reduction in porosity by mineral precipitation increases fluid pressure by constricting pore volume and is identified as a potentially significant source of pressure. A scaling relationship is derived to determine when porosity loss becomes important; if permeability is low enough, pressurization by porosity loss outweighs pressurization by thermal expansion of fluids.

Finite element analysis of ground deformation due to dike intrusion with applications to Mt. Etna volcano

Directory of Open Access Journals (Sweden)

G. La Rosa

2004-06-01

Full Text Available A 2D finite elements study was carried out to analyse the effects caused by dike intrusion inside a heterogeneous medium and with a realistic topography of Mt. Etna volcano. Firstly, the method (dimension domain, elements type was calibrated using plane strain models in elastic half-spaces; the results were compared with those obtained from analytical dislocation models. Then the effects caused both by the topographic variations and the presence of multi-layered medium on the surface, were studied. In particular, an application was then considered to Mt. Etna by taking into account the real topography and the stratification deduced from seismic tomography. In these conditions, the effects expected by the dike, employed to model the 2001 eruption under simple elastic half-space medium conditions, were computed, showing that topography is extremely important, at least in the near field.

Titaniferous magnetite and barite from the San Gregorio de Polanco dike swarm, Paraná Magmatic Province, Uruguay

Directory of Open Access Journals (Sweden)

Rossana Muzio

2013-07-01

Full Text Available The San Gregorio de Polanco Dike Swarm (Tacuarembó Department, Uruguay is the southernmost set of dikes in the Paraná Magmatic Province of Uruguay. Five major dikes have been identified with two main structural trends: N140º–N170º and N50º–N80º. The dikes have tholeiitic affinities and are composed of plagioclase (An55, augite and augite-pigeonite, relicts of olivine and opaque minerals. These rocks have high contents of Fe–Ti oxides (titanomagnetites, the mineralogical and textural characteristics of which have been studied using scanning electron microscopy and energy dispersive spectrometry techniques (SEM – EDS. These features, along with other mineralogical and textural relationships, have been used to propose the following crystallization sequence for the dikes: (i crystallization of olivine, plagioclase and Ca-rich pyroxene phenocrysts; (ii precipitation of the first population of Ti-magnetite; (iii crystallization of plagioclase and pyroxene in the groundmass; (iv partial dissolution of Ti-magnetite by reaction with magmatic fluids; (v crystallization of the second population of Ti-magnetite and finally, (vi crystallization of interstitial barite.   Resumen El Haz de Diques de San Gregorio de Polanco (Departamento de Tacuarembó, Uruguay es la ocurrencia más meridional de diques pertenecientes a la Provincia Magmática Paraná en Uruguay. Fueron identificados cinco 5 diques principales con dos direcciones estructurales principales: N140º - N170º y N50º - N80º, respectivamente. Son diques de afinidad tholeítica compuestos por plagioclasa (An55, augita y augita-pigeonita, relictos de olivina y minerales opacos. Estos diques se caracterizan por el alto contenido de óxidos de Fe y Ti (titanomagnetitas, cuyas características mineralógicas y texturales fueron estudiadas con microscopio electrónico de barrido y espectrometría de energía dispersiva (SEM-EDS, incluyendo mapeos composicionales. Estas caracter

Nickel and other metal uptake and accumulation by species of Alyssum (Brassicaceae) from the ultramafics of Iran

International Nuclear Information System (INIS)

Ghaderian, S.M.; Mohtadi, A.; Rahiminejad, M.R.; Baker, A.J.M.

2007-01-01

Some plants growing on serpentine (ultramafic) soils are able to hyperaccumulate nickel in their above-ground parts. The genus Alyssum L. contains the greatest number of Ni-hyperaccumulator plants so far reported. There are substantial areas of serpentine soils at many locations in Iran. This paper presents the analyses for Ni, Cr, Mn, Fe, Mg and Ca in soils and Alyssum species from the ultramafics of west and northwest Iran. Soil analysis for total elements in these areas indicates that typical concentrations of Ni, Cr, Mn, Fe, Mg and Ca are up to about 1240, 365, 800, 51,150, 152,390 and 11,790 μg g -1 , respectively. During this study, seven Alyssum species were collected. Analysis of leaf dry matter shows that Alyssum bracteatum can contain up to 2300 μg Ni g -1 , while the other species contain much lower concentrations of Ni and other elements. A. bracteatum is endemic to Iran and the first Ni hyperaccumulator reported from this species. - Analysis of leaf dry matter shows that Alyssum bracteatum, endemic to Iran, can contain up to 2300 μg Ni g -1 , while other species contain much lower concentrations of Ni and other elements

Metasomatized and hybrid rocks associated with a Palaeoarchaean layered ultramafic intrusion on the Johannesburg Dome, South Africa

Science.gov (United States)

Anhaeusser, Carl R.

2015-02-01

The Johannesburg Dome occurs as an inlier of Palaeoarchaean-Mesoarchaean granitic rocks, gneisses and greenstones in the central part of the Kaapvaal Craton, South Africa. In the west-central part of the dome a large greenstone remnant is surrounded and intruded by ca. 3114 Ma porphyritic granodiorites. Referred to locally as the Zandspruit greenstone remnant, it consists of a shallow-dipping ultramafic complex comprised of a number of alternating layers of harzburgite and pyroxenite. The ultramafic rocks are metamorphosed to greenschist grade and have largely been altered to serpentinite and amphibolite (tremolite-actinolite). In the granite-greenstone contact areas the porphyritic granodiorite has partially assimilated the greenstones producing a variety of hybrid rocks of dioritic composition. The hybrid rocks contain enclaves or xenoliths of greenstone and, in places, orbicular granite structures. Particularly noteworthy is an unusual zone of potash-metasomatized rock, occurring adjacent to the porphyritic granodiorite, consisting dominantly of biotite and lesser amounts of carbonate, quartz and sericite. Large potash-feldspar megacrysts and blotchy aggregated feldspar clusters give the rocks a unique texture. An interpretation placed on these rocks is that they represent metasomatized metapyroxenites of the layered ultramafic complex. Field relationships and geochemical data suggest that the rocks were influenced by hydrothermal fluids emanating from the intrusive porphyritic granodiorite. The adjacent greenstones were most likely transformed largely by the process of infiltration metasomatism, rather than simple diffusion, as CO2, H2O as well as dissolved components were added to the greenstones. Element mobility appears to have been complex as those generally regarded as being immobile, such as Ti, Y, Zr, Hf, Ta, Nb, Th, Sc, Ni, Cr, V, and Co, have undergone addition or depletion from the greenstones. Relative to all the rocks analyzed from the greenstones

Jurassic-Paleogene intraoceanic magmatic evolution of the Ankara Mélange, north-central Anatolia, Turkey

Science.gov (United States)

Sarifakioglu, E.; Dilek, Y.; Sevin, M.

2014-02-01

Oceanic rocks in the Ankara Mélange along the Izmir-Ankara-Erzincan suture zone (IAESZ) in north-central Anatolia include locally coherent ophiolite complexes (∼ 179 Ma and ∼ 80 Ma), seamount or oceanic plateau volcanic units with pelagic and reefal limestones (96.6 ± 1.8 Ma), metamorphic rocks with ages of 256.9 ± 8.0 Ma, 187.4 ± 3.7 Ma, 158.4 ± 4.2 Ma, and 83.5 ± 1.2 Ma indicating northern Tethys during the late Paleozoic through Cretaceous, and subalkaline to alkaline volcanic and plutonic rocks of an island arc origin (∼ 67-63 Ma). All but the arc rocks occur in a shale-graywacke and/or serpentinite matrix, and are deformed by south-vergent thrust faults and folds that developed in the middle to late Eocene due to continental collisions in the region. Ophiolitic volcanic rocks have mid-ocean ridge (MORB) and island arc tholeiite (IAT) affinities showing moderate to significant large ion lithophile elements (LILE) enrichment and depletion in Nb, Hf, Ti, Y and Yb, which indicate the influence of subduction-derived fluids in their melt evolution. Seamount/oceanic plateau basalts show ocean island basalt (OIB) affinities. The arc-related volcanic rocks, lamprophyric dikes and syenodioritic plutons exhibit high-K shoshonitic to medium- to high-K calc-alkaline compositions with strong enrichment in LILE, rare earth elements (REE) and Pb, and initial ɛNd values between +1.3 and +1.7. Subalkaline arc volcanic units occur in the northern part of the mélange, whereas the younger alkaline volcanic rocks and intrusions (lamprophyre dikes and syenodioritic plutons) in the southern part. The late Permian, Early to Late Jurassic, and Late Cretaceous amphibole-epidote schist, epidote-actinolite, epidote-chlorite and epidote-glaucophane schists represent the metamorphic units formed in a subduction channel in the northern Neotethys. The Middle to Upper Triassic neritic limestones spatially associated with the seamount volcanic rocks indicate that the northern

The Importance of Hydraulic Structures for Society: Quay Walls and Dikes in the Netherlands

Directory of Open Access Journals (Sweden)

de Gijt J.G.

2015-12-01

Full Text Available Since mankind exists, men have undertaken engineering activities to make their life more pleasant and secure. However this has not been an easy task, especially in the past. The knowledge of mathematics and physics to describe engineering problems became available only since 1400-1500. Nevertheless, great achievements have been made by man before that time, e.g. the pyramids in Egypt, the first sluice in China, the Borobudur temple in Indonesia, and the design and building activities of the Inca’s in South America. To illustrate this development, also the world economy, world ecology will be shortly mentioned. The structures that are briefly discussed in this paper are: soil and concrete dams for generating electricity, reservoirs for irrigation and drinking water, dikes, sluices, inland and sea, tunnels, and quay walls. This paper presents an overview of hydraulic structures in general with the emphasis on quay walls and dikes in the Netherlands. Examples of these structures will be discussed illustrating present state of the art and also with a view to the future. Conclusions and recommendations are given to enhance the knowledge of hydraulic structures.

Reinforcement of Soft Foundation with Geotextile and Observation for Sea Dike Project of Zhapu Port

Institute of Scientific and Technical Information of China (English)

章香雅; 郑祖祯

2003-01-01

The design method of reinforcement of soft foundation with geotextile for the sea dike of the Zhapu Port is discussed in this paper. The prototype behaviours such as pore water pressure, settlement and so on were observed. The degree of consolidation is found out from observed pore water pressure and observed settlement respectively, then the strength increment of soil is calculated and compared with that obtained from vane shear tests. For the use of observed pore water pressure, the consolidation coefficient of soil is deduced approximately with a method named experimental exponential interpolation. The degree of consolidation of the ground is deduced theoretically from the dissipation of pore water pressure. Besides, the logarithmic curve and hyperbola are used to fit the observed time-settlement curve, and the degree of consolidation of soil is obtained according to the definition of the consolidation degree. After preliminary verification with observed prototype data, the method to reinforce the low dike with geotextile is considered to be simple and rational, and it can also reduce the construction cost.

Water Resources Research Program. Abatement of malodors at diked, dredged-material disposal sites. Final report

Energy Technology Data Exchange (ETDEWEB)

Harrison, W.; Dravnieks, A.; Zussman, R.; Goltz, R.

1976-06-01

Samples of malodorous air and dredged material were collected at diked disposal sites at the following locations: Buffalo, NY; Milwaukee, WI; Mobile, AL; York Harbor, ME; Houston, TX; Detroit, MI; and Anacortes, WA; during the period July--October, 1975. Odorous compounds in the air samples were identified by gas chromatography/mass spectrometry, while the detection threshold, intensity, and character of the various odors were determined by experienced panelists using a dynamic, forced-choice-triangle olfactometer. Although significant problems with malodors were not observed beyond the disposal-area dikes during site visits, noteworthy odor episodes had occurred at some sites. An odor-abatement strategy is presented for handling the expected range of odor conditions at dredged-material disposal sites. Its aim is to reduce to an acceptable level the intensity of malodors in an affected community. The main steps in the strategy cover selection of the disposal site, site preparation, odor characterization of sediments to be dredged, malodor abatement during dredging and disposal operations, malodor abatement after filling of the disposal site, and the handling of malodor complaints.

Operational wave now- and forecast in the German Bight as a basis for the assessment of wave-induced hydrodynamic loads on coastal dikes

Science.gov (United States)

Dreier, Norman; Fröhle, Peter

2017-12-01

The knowledge of the wave-induced hydrodynamic loads on coastal dikes including their temporal and spatial resolution on the dike in combination with actual water levels is of crucial importance of any risk-based early warning system. As a basis for the assessment of the wave-induced hydrodynamic loads, an operational wave now- and forecast system is set up that consists of i) available field measurements from the federal and local authorities and ii) data from numerical simulation of waves in the German Bight using the SWAN wave model. In this study, results of the hindcast of deep water wave conditions during the winter storm on 5-6 December, 2013 (German name `Xaver') are shown and compared with available measurements. Moreover field measurements of wave run-up from the local authorities at a sea dike on the German North Sea Island of Pellworm are presented and compared against calculated wave run-up using the EurOtop (2016) approach.

Assessment of chevron dikes for the enhancement of physical-aquatic habitat within the Middle Mississippi River, USA

Science.gov (United States)

Remo, Jonathan W. F.; Khanal, Anish; Pinter, Nicholas

2013-09-01

Blunt-nosed chevron dikes, a new invention now being widely constructed on the Middle Mississippi River (MMR), have been justified as a tool for enhancing physical-aquatic habitat. Chevron dikes were initially designed to concentrate flow, induce channel scour, and thus facilitate river navigation. More recently, these structures have been justified, in part, for promoting habitat heterogeneity. The ability of chevrons to create and diversify physical-aquatic habitat, however, has not been empirically evaluated. To assess the ability of chevrons to create and diversify physical-aquatic habitat, we compiled hydrologic and geospatial data for three channel reference conditions along a 2.0 km (∼140 ha) reach of the MMR where three chevrons were constructed in late 2007. We used the hydrologic and hydraulic data to construct detailed 2-D hydrodynamic models for three reference condition: historic (circa 1890), pre-chevron, and post-chevron channel conditions. These models documented changes in depths and flow dynamics for a wide range of in-channel discharges. Depth-velocity habitat classes were used to assess change in physical-aquatic habitat patches and spatial statistical tools in order to evaluate the reach-scale habitat patch diversity. Comparisons of pre- and post-chevron conditions revealed increases in deep to very deep (>3.0 m) areas of slow moving (3.0 m], low velocity [<0.6 m/s]). Chevron construction also created some (0.8-3.8 ha) shallow-water habitat (0-1.5 m depth with a 0-0.6 m/s velocity) for flows ⩽2.0 × MAF and contributed to an 8-35% increase in physical-aquatic-habitat diversity compared to pre-chevron channel conditions. However, modeling of the historic reference condition (less engineered channel, circa 1890) revealed that the historical physical-aquatic-habitat mosaic consisted of a wider and shallower channel with: 45-390% more shallow-water habitat (2.4-11.0 ha) and 22-83% more physical-aquatic-habitat diversity, but little over

Metamorphic evolution and U-Pb zircon SHRIMP geochronology of the Belizário ultramafic amphibolite, Encantadas Complex, southernmost Brazil

Directory of Open Access Journals (Sweden)

Hartmann Léo A.

2003-01-01

Full Text Available The integrated investigation of metamorphism and zircon U-Pb SHRIMP geochronology of the Belizário ultramafic amphibolite from southernmost Brazil leads to a better understanding of the processes involved in the generation of the Encantadas Complex. Magmatic evidence of the magnesian basalt or pyroxenite protolith is only preserved in cores of zircon crystals, which are dated at 2257 ± 12 Ma. Amphibolite facies metamorphism M1 formed voluminous hornblende in the investigated rock possibly at 1989 ± 21 Ma. This ultramafic rock was re-metamorphosed at 702±21 Ma during a greenschist facies eventM2; the assemblage actinolite + oligoclase + microcline + epidote + titanite + monazite formed by alteration of hornblende. The metamorphic events are probably related to the Encantadas Orogeny (2257±12 Ma and Camboriú Orogeny (~ 1989 Ma of the Trans-Amazonian Cycle, followed by an orogenic event (702±21 Ma of the Brasiliano Cycle. The intervening cratonic period (2000-700 Ma corresponds to the existence of the Supercontinent Atlantica, known regionally as the Rio de la Plata Craton.

Rb-Sr and Nd-Sr isotope geochemistry and petrogenesis of the Misho Mountains mafic dikes (NW Iran

Directory of Open Access Journals (Sweden)

Maryam Ahankoub

2017-02-01

Full Text Available Introduction There are some theories about the Paleotethys event during the Paleozoic that have been proposed by geologists (Metcalfe, 2006. Some scientist offered some pieces of evidence about the northern margin of Gondwana (Zhu et al., 2010. The Paleotethys Ocean and Hercynian orogenic report first in Iran, have been Offered from the Morrow and Misho Mountain (Eftekharnejad, 1981. Misho Mountains is located between the north and south Misho faults and cause the formation of a positive flower structure (Moayyed and Hossainzade, 2011. There is theory about Misho southern fault as the best candidate of the Paleotethys suture zone (Moayyed and Hossainzade, 2011. Geochemistry and Sr –Nd isotopic data of the A2 granitic and Synite rocks of the East Misho, indicate that the magmatism post collision has occurred in the active continental margin by extensional zones of the following the closure of the Paleotethys (Ahankoub, 2012. Granite and syenite rocks have been cut by mafic dikes. Mafic dikes are often formed in extensional tectonic settings related to mantle plume or continental break –up (Zhu et al., 2009. In this paper, we use the geochemistry and Nd-Sr isotope data to determined petrogenesis, tectono-magmatic setting and age of Misho mafic dikes. Materials and methods After petrography study of 30 thin sections of mafic dike rocks, 8 samples were selected for whole-rock chemical analyses using ICP-MS and ICP-AES instruments by ACME Company in Vancouver, Canada. We prepared 6 sample For Sm-Nd and Rb-Sr analysis. Sr and Nd isotope ratios were measured with a thermal ionization mass spectrometer, VG Sector 54–30 at the Nagoya University. The isotope abundances of Rb, Sr, Nd, and Sm were measured by the ID method with a Finnigan MAT Thermoquad THQ thermal ionization quadrupole mass spectrometer at the Nagoya University. NBS987 and JNdi-1 were measured as natural Sr and Nd isotope ratio standards (Tanaka et al., 2000. Averages and 2σ errors

Sulfide mineralization in ultramafic rocks of the Faryab ophiolite complex, southern Kerman

Directory of Open Access Journals (Sweden)

Mohammad Ali Rajabzadeh

2015-10-01

Full Text Available Introduction Worldwide, Ni-Cu and PGE magmatic sulfide deposits are confined to the lower parts of stratiform mafic and ultramafic complexes. However, ophiolite mafic and ultramafic complexes have been rarely explored for sulfide deposits despite the fact that they have been extensively explored and exploited for chromite. Sulfide saturation during magmatic evolution is necessary for sulfide mineralization, in which sulfide melts scavenge chalcophile metals from the parent magma and concentrate them in specific lithological zones. The lack of exploration for sulfides in this environment suggests that sulfide saturation is rarely attained in ophiolite-related magmas. Some ophiolites, however, contain sulfide deposits, such as at Acoje in Philippines, and Cliffs in Shetland, U.K. (Evans, 2000; Naldrett, 2004. The Faryab ophiolite complex in southern Kerman Province, the most important mining area for chromite deposits in Iran, is located in the southwest part of the Makran Zone. Evidence of sulfide mineralization has been reported there by some authors (e.g. Rajabzadeh and Moosavinasab, 2013. This paper discusses the genesis of sulfides in the Faryab ophiolite using mineral chemistry of the major mineral phases in different rocks of the ophiolite column in order to determine the possible lithological location of sulfide deposits. Materials and methods Seventy three rock samples from cumulate units were collected from surficial occurrences and drill core. The samples were studied using conventional microscopic methods and the mineralogy confirmed by x-ray diffraction. Electron microprobe analysis was carried out on different mineral phases in order to determine the chemistry of the minerals used in the interpretation of magma evolution in the Faryab ophiolite. Lithologically, the Faryab ophiolite complex is divided into two major parts: the northern part includes magmatic rocks and the southern part is comprised of rocks residual after partial

Silicate geothermometry as an indicator of water-rock interaction processes in the serpentinized mafic-ultramafic intrusion of Ylivieska

International Nuclear Information System (INIS)

Ruskeeniemi, T.; Blomqvist, R.; Vuorela, P.; Frape, S.K.; Blyth, A.

1996-01-01

The aim of the study was to use oxygen and hydrogen isotopes to examine the origin of different generations of serpentine. Of special interest was the study of low-temperature generations that may be correlated with the present meteoric waters. The research was commenced with drill core logging in order to obtain insight into the fracture minerals and their distribution in a mafic-ultramafic intrusion. (39 refs., 17 figs., 5 tabs.)

Diverse P-T paths for the Cycladic ultramafic rock associations: Constraints on their origin, emplacement and exhumation

International Nuclear Information System (INIS)

Katzir, Y; Garfunkel, Z; Avigad, D; Matthews, A

2008-01-01

Within the Alpine orogen of the Cyclades ultramafic rocks occur in diverse tectonic positions, are associated with a variety of rock sequences and are regionally metamorphosed at variable conditions. Here this diversity is interpreted in terms of variable mechanisms for incorporation of mantle rocks into orogenic belts and used to better constrain spatial heterogeneity of P-T burial and exhumation paths in the Cyclades. The Cycladic Blueschist Unit (CBU) was metamorphosed first at high pressure conditions in the Eocene (M1) and variably overprinted during exhumation in the Early Miocene (M2). On the islands of Syros and Evia the CBU includes relatively thin HP-LT ophiolitic melange intervals hosted by meta-sedimentary sequences. Meta-serpentinites are associated with eclogitized metagabbro and metabasites on Syros, but with epidote blueschists on Evia. Given the wide and comparable geochemical heterogeneity in the Syros and Evian melanges, the Syros metabasites record higher M1 temperatures (450-500 deg. C) relative to their Evian counterparts (400-430 deg. C). The M2 overprint is manifested in Syros by greenschist facies assemblages (∼450 deg. C), whereas pumpellyite-actinolite assemblage (∼350 deg. C) overgrew blueschists in Evia. Within the M2 migmatized leucogneiss core of the Naxos dome (∼700 0 C) meta-peridotite lenses are the sole preservers of pre-M2 history. The Naxos meta-peridotites possess relict mantle assemblage, fertile spinel lherzolite chemical composition and mantle-like oxygen isotope ratios. Thus unlike ophiolite-associated ultramafics in the Cyclades that were serpentinized prior to metamorphism, the Naxos metaperidotites were directly emplaced from the subcontinental mantle into an underthrust continent during collision and HP metamorphism. Ultramafic assemblages constrain M1 temperatures on Naxos to 550-650 0 C. It follows that going southeastwards from Evia through Syros to Naxos progressively deeper levels of the subducted plate are

EroGRASS : Failure of grass cover layers at seaward and shoreward dike slopes. design, construction and performance

NARCIS (Netherlands)

Verhagen, H.J.; Verheij, H.J.; Cao, T.M.; Dassanayake, D.; Roelvink, D.; Piontkowitz, T.

2009-01-01

A large number of the dikes in the North Sea and Baltic Sea regions are covered with grass that is exposed to hydraulic loading from waves and currents during storm surges. During previous storm surges the grass cover layers often showed large strength and remained undamaged. A clear physical

Impacts of ultramafic outcrops in Peninsular Malaysia and Sabah on soil and water quality.

Science.gov (United States)

Tashakor, Mahsa; Modabberi, Soroush; van der Ent, Antony; Echevarria, Guillaume

2018-05-08

This study focused on the influence of ultramafic terrains on soil and surface water environmental chemistry in Peninsular Malaysia and in the State of Sabah also in Malaysia. The sampling included 27 soils from four isolated outcrops at Cheroh, Bentong, Bukit Rokan, and Petasih from Peninsular Malaysia and sites near Ranau in Sabah. Water samples were also collected from rivers and subsurface waters interacting with the ultramafic bodies in these study sites. Physico-chemical parameters (including pH, EC, CEC) as well as the concentration of major and trace elements were measured in these soils and waters. Geochemical indices (geoaccumulation index, enrichment factor, and concentration factor) were calculated. Al 2 O 3 and Fe 2 O 3 had relatively high concentrations in the samples. A depletion in MgO, CaO, and Na 2 O was observed as a result of leaching in tropical climate, and in relation to weathering and pedogenesis processes. Chromium, Ni, and Co were enriched and confirmed by the significant values obtained for Igeo, EF, and CF, which correspond to the extreme levels of contamination for Cr and high to moderate levels of contamination for Ni and Co. The concentrations of Cr, Ni, and Co in surface waters did not reflect the local geochemistry and were within the permissible ranges according to WHO and INWQS standards. Subsurface waters were strongly enriched by these elements and exceeded these standards. The association between Cr and Ni was confirmed by factor analysis. The unexpected enrichment of Cu in an isolated component can be explained by localized mineralization in Sabah.

Rhizosphere bacteria of Costularia spp. from ultramafic soils in New Caledonia: diversity, tolerance to extreme edaphic conditions, and role in plant growth and mineral nutrition.

Science.gov (United States)

Gonin, Mathieu; Gensous, Simon; Lagrange, Alexandre; Ducousso, Marc; Amir, Hamid; Jourand, Philippe

2013-03-01

Rhizosphere bacteria were isolated from Costularia spp., pioneer sedges from ultramafic soils in New Caledonia, which is a hotspot of biodiversity in the South Pacific. Genus identification, ability to tolerate edaphic constraints, and plant-growth-promoting (PGP) properties were analysed. We found that 10(5) colony-forming units per gram of root were dominated by Proteobacteria (69%) and comprised 21 genera, including Burkholderia (28%), Curtobacterium (15%), Bradyrhizobium (9%), Sphingomonas (8%), Rhizobium (7%), and Bacillus (5%). High proportions of bacteria tolerated many elements of the extreme edaphic conditions: 82% tolerated 100 μmol·L(-1) chromium, 70% 1 mmol·L(-1) nickel, 63% 10 mmol·L(-1) manganese, 24% 1 mmol·L(-1) cobalt, and 42% an unbalanced calcium/magnesium ratio (1/16). These strains also exhibited multiple PGP properties, including the ability to produce ammonia (65%), indole-3-acetic acid (60%), siderophores (52%), and 1-aminocyclopropane-1-carboxylate (ACC) deaminase (39%); as well as the capacity to solubilize phosphates (19%). The best-performing strains were inoculated with Sorghum sp. grown on ultramafic substrate. Three strains significantly enhanced the shoot biomass by up to 33%. The most successful strains influenced plant nutrition through the mobilization of metals in roots and a reduction of metal transfer to shoots. These results suggest a key role of these bacteria in plant growth, nutrition, and adaptation to the ultramafic constraints.

International Uranium Resources Evaluation Project (IUREP) orientation phase mission summary report: Rwanda

International Nuclear Information System (INIS)

1985-01-01

A report has recently been published which describes the findings of the International Uranium Resources Evaluation Project (IUREP) Mission to Rwanda. The IUREP Orientation Phase Mission to Rwanda estimates that the Speculative Resources of that country fall within the range of 500 to 5 000 tonnes of uranium. The majority of this potential is expected to be located in the Precambrian Ruzizian, especially in conjunction with tectonized pegmatoidal remobilizations of metamorphic sediments of western Rwanda. Other favourable geological environments include lamprophyric dikes and post tectonic granites of central Rwanda. The Mission recommends that over a period of five years approximately US$4.2 million be spent on exploration in Rwanda. The majority of this would be spent on airborne and ground geophysical surveys ($1.5 million) and exploration drilling ($1 million). Prospecting, trenching and tunneling and analytical work would require the remainder of the $4.2 million ($1.7 million). (author)

Origins of high pH mineral waters from ultramafic rocks, Central Portugal

Energy Technology Data Exchange (ETDEWEB)

Marques, Jose M. [Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001, Lisboa (Portugal)], E-mail: jose.marques@ist.ult.pt; Carreira, Paula M. [Instituto Tecnologico e Nuclear, Estrada Nacional No 10, 2686-953 Sacavem (Portugal); Carvalho, Maria Rosario [Departamento de Geologia, Faculdade de Ciencias, Universidade de Lisboa, Ed. C6, 3oP, Campo Grande, 1749-016 Lisboa (Portugal); Matias, Maria J. [Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001, Lisboa (Portugal); Goff, Fraser E. [Earth and Planetary Sciences Department MSCO3-2040, University of New Mexico, Albuquerque, New Mexico 87131-000 (United States); Basto, Maria J.; Graca, Rui C.; Aires-Barros, Luis [Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001, Lisboa (Portugal); Rocha, Luis [Junta de Freguesia, Av. da Libertacao, 45-D, 7460-002, Cabeco de Vide (Portugal)

2008-12-15

This paper reviews the geochemical, isotopic ({sup 2}H, {sup 18}O, {sup 13}C, {sup 3}H and {sup 14}C) and numerical modelling approaches to evaluate possible geological sources of the high pH (11.5)/Na-Cl/Ca-OH mineral waters from the Cabeco de Vide region (Central-Portugal). Water-rock interaction studies have greatly contributed to a conceptual hydrogeological circulation model of the Cabeco de Vide mineral waters, which was corroborated by numerical modelling approaches. The local shallow groundwaters belong to the Mg-HCO{sub 3} type, and are derived by interaction with the local serpentinized rocks. At depth, these type waters evolve into the high pH/Na-Cl/Ca-OH mineral waters of Cabeco de Vide spas, issuing from the intrusive contact between mafic/ultramafic rocks and an older carbonate sequence. The Cabeco de Vide mineral waters are supersaturated with respect to serpentine indicating that they may cause serpentinization. Magnesium silicate phases (brucite and serpentine) seem to control Mg concentrations in Cabeco de Vide mineral waters. Similar {delta}{sup 2}H and {delta}{sup 18}O suggest a common meteoric origin and that the Mg-HCO{sub 3} type waters have evolved towards Cabeco de Vide mineral waters. The reaction path simulations show that the progressive evolution of the Ca-HCO{sub 3} to Mg-HCO{sub 3} waters can be attributed to the interaction of meteoric waters with serpentinites. The sequential dissolution at CO{sub 2} (g) closed system conditions leads to the precipitation of calcite, magnesite, amorphous silica, chrysotile and brucite, indicating that the waters would be responsible for the serpentinization of fresh ultramafic rocks (dunites) present at depth. The apparent age of Cabeco de Vide mineral waters was determined as 2790 {+-} 40 a BP, on the basis of {sup 14}C and {sup 13}C values, which is in agreement with the {sup 3}H concentrations being below the detection limit.

Si-Metasomatism During Serpentinization of Jurassic Ultramafic Sea-floor: a Comparative Study

Science.gov (United States)

Vogel, M.; Frueh-Green, G. L.; Boschi, C.; Schwarzenbach, E. M.

2014-12-01

The Bracco-Levanto ophiolitic complex (northwestern Italy) represents one of the largest and better-exposed ophiolitic successions in the Northern Apennines. It is considered to be a fragment of heterogeneous Jurassic lithosphere that records tectono-magmatic and alteration histories similar to those documented along the Mid-Atlantic Ridge (MAR), such as at the 15°20'N area and the Atlantis Massif at 30°N. Structural and petrological studies on these rocks provide constraints on metamorphic/deformation processes during formation and hydrothermal alteration of the Jurassic oceanic lithosphere. We present a petrological and geochemical study of serpentinization processes and fluid-rock interaction in the Bracco-Levanto ophiolitic complex and compare these to published data from modern oceanic hydrothermal systems, such as the Lost City hydrothermal field hosted in serpentinites on the Atlantis Massif. Major element and mineral compositional data allow us to distinguish a multiphase history of alteration characterized by: (1) widespread Si-metasomatism during progressive serpentinization, and (2) multiple phases of veining and carbonate precipitation associated with circulation of seawater in the shallow ultramafic-dominated portions of the Jurassic seafloor, resulting in the formation of ophicalcites. In detail, regional variations in Si, Mg and Al content are observed in zones of ophicalcite formation, indicating metasomatic reactions and Si-Al transport during long-lived fluid-rock interaction and channelling of hydrothermal fluids. Rare earth element and isotopic analysis indicate that the Si-rich fluids are derived from alteration of pyroxenes to talc and tremolite in ultramafic rocks at depth. Comparison with serpentinites from the Atlantis Massif and 15°20'N indicates a similar degree of Si-enrichment in the modern seafloor and suggests that Si-metasomatism may be a fundamental process associated with serpentinization at slow-spreading ridge environments

The emerald deposits of ultramafic rocks of Capoeirana and Belmont, State of Minas Gerais, Brazil

International Nuclear Information System (INIS)

Abreu Machado, G.; Schorscher, H.

1998-01-01

The emerald deposits of Capoeirana and Belmont, State of Minas Gerais (MG), Brazil, occur vithin an area comprising a deeply weathered Archean Metavulcano-Sedimentary Sequence (SVS) in tectonic contact with the Borrachudos Metagranitoids (GB) and Fluorite bearing Foliated Metagranitoids (MGF). The SVS is formed by intercalation s of ultramafic schists and amphibolites, basic to intermediate amphibolites, vulcanoclastic, metapelitic and calcsilicate schists and gneisses, banded iron formation and metacherts. The metaultramafic rocks include minor chromitite cumulates and occur at the base of the SVS. When metasomatized in the shear zones adjoining GB and MGF they host emerald mineralizations. (author)

Ferroan Dolomitization by Seawater Interaction with Mafic Igneous Dikes and Carbonate Host Rock at the Latemar Platform, Dolomites, Italy: Numerical Modeling of Spatial, Temporal, and Temperature Data

Directory of Open Access Journals (Sweden)

K. Blomme

2017-01-01

Full Text Available Numerous publications address the petrogenesis of the partially dolomitized Latemar carbonate platform, Italy. A common factor is interpretation of geochemical data in terms of heating via regional igneous activity that provided kinetically favorable conditions for replacement dolomitization. New field, petrographic, XRD, and geochemical data demonstrate a spatial, temporal, and geochemical link between replacement dolomite and local mafic igneous dikes that pervasively intrude the platform. Dikes are dominated by strongly altered plagioclase and clinopyroxene. Significantly, where ferroan dolomite is present, it borders dikes. We hypothesize that seawater interacted with mafic minerals, causing Fe enrichment in the fluid that subsequently participated in dolomitization. This hypothesis was tested numerically through thermodynamic (MELTS, Arxim-GEM and reactive flow (Arxim-LMA simulations. Results confirm that seawater becomes Fe-enriched during interaction with clinopyroxene (diopside-hedenbergite and plagioclase (anorthite-albite-orthoclase solid solutions. Reaction of modified seawater with limestone causes ferroan and nonferroan replacement dolomitization. Dolomite quantities are strongly influenced by temperature. At 40 to 80°C, ferroan dolomite proportions decrease with increasing temperature, indicating that Latemar dolomitization likely occurred at lower temperatures. This relationship between igneous dikes and dolomitization may have general significance due to the widespread association of carbonates with rifting-related igneous environments.

Origin of ultramafic-hosted magnesite on Margarita Island, Venezuela

Science.gov (United States)

Abu-Jaber, N. S.; Kimberley, M. M.

1992-06-01

Ultramafic-hosted deposits of magnesite (MgCO3) have been studied on Margarita Island, Venezuela, to elucidate the source of carbon and conditions of formation for this type of ore. Petrographic, mineralogic, and δ18O data indicate that magnesite precipitated on Margarita in near-surface environments at low P and T. δ13C ranges from -9 to -16‰ PDB within the magnesite and -8 to -10‰ PDB within some calcite and dolomite elsewhere on the island. The isotopically light dolomite fills karst and the calcite occurs as stock-work veins which resemble the magnesite deposits. These carbon isotopic ratios are consistent with a deep-seated source rather than an overlying source from a zone of surficial weathering. However, there is not much enrichment of precious metals and no enrichment of heavy rare-earth elements, as would be expected if the carbon had migrated upward as aqueous carbonate ions. The carbon probably has risen as a gaseous mixture of CO2 and CH4 which partially dissolved in near-surface water before leaching cations and precipitating as magnesite and other carbonates. The process probably is ongoing, given regional exhalation of carbonaceous gases.

The May 2005 eruption of Fernandina volcano, Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

Science.gov (United States)

Chadwick, W.W.; Jonsson, Sigurjon; Geist, Dennis J.; Poland, M.; Johnson, Daniel J.; Batt, S.; Harpp, Karen S.; Ruiz, A.

2011-01-01

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45–60°) toward the caldera at the surface and more gently dipping (~12–14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another.

The May 2005 eruption of Fernandina volcano, Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

KAUST Repository

Chadwick, William W Jr; Jonsson, Sigurjon; Geist, Dennis J.; Poland, Michael P.; Johnson, Daniel J.; Batt, Spencer; Harpp, Karen S.; Ruiz, André s Gorki

2010-01-01

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45-60°) toward the caldera at the surface and more gently dipping (~12-14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another. © 2010 Springer-Verlag.

The May 2005 eruption of Fernandina volcano, Galápagos: The first circumferential dike intrusion observed by GPS and InSAR

KAUST Repository

Chadwick, William W Jr

2010-12-15

The May 2005 eruption of Fernandina volcano, Galápagos, occurred along circumferential fissures parallel to the caldera rim and fed lava flows down the steep southwestern slope of the volcano for several weeks. This was the first circumferential dike intrusion ever observed by both InSAR and GPS measurements and thus provides an opportunity to determine the subsurface geometry of these enigmatic structures that are common on Galápagos volcanoes but are rare elsewhere. Pre- and post- eruption ground deformation between 2002 and 2006 can be modeled by the inflation of two separate magma reservoirs beneath the caldera: a shallow sill at ~1 km depth and a deeper point-source at ~5 km depth, and we infer that this system also existed at the time of the 2005 eruption. The co-eruption deformation is dominated by uplift near the 2005 eruptive fissures, superimposed on a broad subsidence centered on the caldera. Modeling of the co-eruption deformation was performed by including various combinations of planar dislocations to simulate the 2005 circumferential dike intrusion. We found that a single planar dike could not match both the InSAR and GPS data. Our best-fit model includes three planar dikes connected along hinge lines to simulate a curved concave shell that is steeply dipping (~45-60°) toward the caldera at the surface and more gently dipping (~12-14°) at depth where it connects to the horizontal sub-caldera sill. The shallow sill is underlain by the deep point source. The geometry of this modeled magmatic system is consistent with the petrology of Fernandina lavas, which suggest that circumferential eruptions tap the shallowest parts of the system, whereas radial eruptions are fed from deeper levels. The recent history of eruptions at Fernandina is also consistent with the idea that circumferential and radial intrusions are sometimes in a stress-feedback relationship and alternate in time with one another. © 2010 Springer-Verlag.

Interaction of extended mantle plume head with ancient lithosphere: evidence from deep-seated xenoliths in basalts and lamprophyre diatremes in Western Syria

Science.gov (United States)

Sharkov, Evgenii

2016-04-01

The Middle Cretaceous lamprophyric diatremes of the Jabel Ansaria Ridge contain xenoliths of ancient lower crustal rocks mainly represented by the suite of partly altered garnet granulite and eclogite-like rocks, which were formed at the expense of ferrogabbros and ferroclinopyroxenites most likely in the course of underplating of Fe-Ti basalt. Garnet (Alm26Grs11Py63) megacrysts and coarse-granular garnet-clinopyroxene intergrowths are most likely the varieties of rocks of this series. Garnet megacrysts are represented by large (up to 10 cm in diameter) round "nodules," often molten from the surface. Garnet is usually fractured, and the kelyphite material similar to that in rocks of the eclogite-granulite series occurs in fractures. In addition, we found several intergrowths of garnet with large (up to 3-5 cm in length) crystals of high-Al augite with the low of Ti and Na contents like in rocks of the eclogite-granulite suite. Coarse-grained garnet-clinopyroxene-hornblende rocks with spinel, as well as megacrysts of Al-Ti augite with kaersutite, form the second group in prevalence. This group is close to mantle xenoliths of the "black series" in alkali Fe-Ti basalt worldwide. Kaersutite in these rocks contains gaseous cavities, which provides evidence for the origin of rocks at the expense of a strongly fluidized melt/fluid. In contrast to rocks of the eclogite-granulite series, these rocks did not undergo alteration. Garnet Alm19-26Grs12-13.5Py59-67.5 usually associates with dark opaque spinel. In contrast, the Late Cenozoic plateaubasalts of the region practically do not contain lower crustal xenoliths, whereas xenoliths of mantle spinel lherzolite (fragments of the upper cooled rim of the plume head) are widely abundant. According to data of mineralogical thermobarometry, rocks of the eclogite-granulite suite were formed at 13.5-15.4 kbar (depths of 45-54 km) and 965-1115°C. Rocks of this suite are typical representatives of the continental lower crust

Composition of the earth's upper mantle. II - Volatile trace elements in ultramafic xenoliths

Science.gov (United States)

Morgan, J. W.; Wandless, G. A.; Petrie, R. K.; Irving, A. J.

1980-01-01

Radiochemical neutron activation analysis was used to determine the nine volatile elements Ag, Bi, Cd, In, Sb, Se, Te, Tl, and Zn in 19 ultramafic rocks, consisting mainly of spinel and garnet lherzolites. A sheared garnet lherzolite, PHN 1611, may approximate undepleted mantle material and tends to have a higher volatile element content than the depleted mantle material represented by spinel lherzolites. Comparisons of continental basalts with PHN 1611 and of oceanic ridge basalts with spinel lherzolites show similar basalt: source material partition factors for eight of the nine volatile elements, Sb being the exception. The strong depletion of Te and Se in the mantle, relative to lithophile elements of similar volatility, suggests that 97% of the earth's S, Se and Te may be in the outer core.

The Berezitovoe gold-polymetallic deposit (Upper Amur region, Russia: Structure, mineralogy and genetic aspects

Directory of Open Access Journals (Sweden)

Alexandr S. Vakh

2016-05-01

Full Text Available The Berezitovoe deposit in the Sergachi volcano-plutonic and metallogenic belt preserves evidence for polymetallic mineralization of multiple stages. The steeply dipping garnet-tourmaline-muscovite-quartz metasomatites (with K-Ar ages of 132 ± 2.9 and 127 ± 4.4 Ma carry two distinct stages of mineralization developed at different times: (1 polymetallic mineralization and (2 gold-quartz. The deposit is located within Paleozoic gneissose granitoids of the Pikansky complex (dated as 379 ± 1.1 Ma by zircon U-Pb method intruded by early Cretaceous porphyry-like granites of the Haikta pluton (dated as 137 ± 0.67 Ma by zircon U-Pb method and late Cretaceous dikes of porphyrites, porphyries, and lamprophyres. Evidence suggests the action of late gold-bearing hydrothermal fluids on the early polymetallic ores and the selective mobilization of some elements from these lead to redeposition together with complex sulphosalts.

Resilience as strategy for climate adaptation under uncertainty. Case study on the area outside the dike of Rotterdam

International Nuclear Information System (INIS)

De Jong, A.

2008-07-01

This study has two aims; (1) to obtain insight in the concepts resilience and uncertainty; to gain insight in how a resilience oriented approach deals with uncertainties about the future; and (2) putting the resilience oriented approach into operation in a case: the area outside the dike of Rotterdam, the Netherlands, which is designated for new buildings [nl

Serpentinization and carbonation of pristine continental ultramafic rocks and applications to the oceanic crust; H2O-CO2 alteration of dunites and re-distribution of Ni-Cu-PGE in sulphide deposits

Science.gov (United States)

Grant, Thomas; McEnroe, Suzanne; Eske Sørensen, Bjørn; Larsen, Rune; Pastore, Zeudia; Rune Grannes, Kim; Nikolaisen, Even

2017-04-01

Here, we document carbonation and serpentinization within a suite of ultramafic rocks from a continental setting. These ultramafic rocks vary from pristine dunites to varying degrees of serpentinization which locally penetrates the ultramafic complex. Hence, it allows us to observe a number of delicate serpentinization and carbonation reactions, otherwise lost during more extensive alteration or tectonic events. We use a multi-disciplinary approach using petrographic, EPMA, thermodynamic modelling and geophysical data to reveal how the initial stages of serpentization and carbonation in dunites affects the distribution of economic to sub-economic deposits of Ni-Cu and PGE. The data can then be applied to oceanic crust. The samples are dunites and poikilitic wehrlites from the Reinfjord Ultramafic complex, Seiland Igneous Province Northern Norway. The complex formed through crystallization of picritic melts in the lower continental crust. The dunites contain small amounts of interstitial clinopyroxene, sulphides and spinel, with local enrichments in Ni, Cu and PGE. Late magmatic CO2-H2O-S fluids reacted with the dunite forming clots of amphibole + dolomite + sulphides + enstatite, reaction rims of enstatite + dolomite, and inclusions trails of dolomite + enstatite + magnetite + CO2 fluid. Thermodynamic modelling reveals that these textures formed at pressures of >12 kbar and temperatures 850-950 °C, which would be consistent with the late magmatic history of the Reinfjord complex. The clots and reactions have local association with enrichments in gold-rich PGMs. A second stage of alteration involved H2O-dominated fluids. These formed predominantly lizardite serpentinization, as is often concentrated within highly localized fracture zones. Thermodynamic modelling shows that these formed serpentinization interacted with the earlier formed carbonate bearing assemblages leading to the formation of serpentinite, native copper and symplectites of brucite + calcite. The

Chemical and isotopic characterization of water-rock interactions in shales induced by the intrusion of a basaltic dike: A natural analogue for radioactive waste disposal

International Nuclear Information System (INIS)

Techer, Isabelle; Rousset, Davy; Clauer, Norbert; Lancelot, Joel; Boisson, Jean-Yves

2006-01-01

Disposal of nuclear waste in deep geological formations is expected to induce thermal fluxes for hundreds of years with maximum temperature reaching about 100-150 deg. C in the nearfield argillaceous environment. The long-term behavior of clays subjected to such thermal gradients needs to be perfectly understood in safety assessment considerations. In this respect, a Toarcian argillaceous unit thermally disturbed by the intrusion of a 1.1-m wide basaltic dike at the Perthus pass (Herault, France), was studied in detail as a natural analogue. The thermal imprint induced by the dike was evaluated by a mineralogical, chemical and K-Ar study of the <2 μm clay fraction of shale samples collected at increasing distance from the basalt. The data suggest that the mineral composition of the shales was not significantly disturbed when the temperature was below 100-150 deg. C. Closer to the dike at 150-300 deg. C, changes such as progressive dissolution of chlorite and kaolinite, increased content of the mixed layers illite-smectite with more illite layers, complete decalcification and subsequent increased content of quartz, were found. At the eastern contact with the dike, the mineral and chemical compositions of both the shales and the basalt suggest water-rock interactions subsequent to the intrusion with precipitation of palagonite and renewed but discrete deposition of carbonate. A pencil cleavage developed in the shales during the dike emplacement probably favored water circulation along the contact. Strontium isotopic data suggest that the fluids of probable meteoric origin, reacted with Bathonian and Bajocian limestones before entering the underlying Toarcian shales. By analogy with deep geological radioactive waste repositories, the results report discrete mineralogical variations of the clays when subjected to temperatures of 100-150 deg. C that are expected in deep storage conditions. Beyond 150 deg. C, significant mineralogical changes may alter the physical and

RESTORING A DAMAGED 16-YEAR -OLD INSULATING POLYMER CONCRETE DIKE OVERLAY: REPAIR MATERIALS AND TECHNOLOGIES.

Energy Technology Data Exchange (ETDEWEB)

SUGAMA,T.

2007-01-01

The objective of this program was to design and formulate organic polymer-based material systems suitable for repairing and restoring the overlay panels of insulating lightweight polymer concrete (ILPC) from the concrete floor and slope wall of a dike at KeySpan liquefied natural gas (LNG) facility in Greenpoint, Brooklyn, NY, just over sixteen years ago. It also included undertaking a small-scale field demonstration to ensure that the commercial repairing technologies were applicable to the designed and formulated materials.

Dike intrusions into bituminous coal, Illinois Basin: H, C, N, O isotopic responses to rapid and brief heating

Science.gov (United States)

Schimmelmann, A.; Mastalerz, Maria; Gao, L.; Sauer, P.E.; Topalov, K.

2009-01-01

Unlike long-term heating in subsiding sedimentary basins, the near-instantaneous thermal maturation of sedimentary organic matter near magmatic intrusions is comparable to artificial thermal maturation in the laboratory in terms of short duration and limited extent. This study investigates chemical and H, C, N, O isotopic changes in high volatile bituminous coal near two Illinois dike contacts and compares observed patterns and trends with data from other published studies and from artificial maturation experiments. Our study pioneers in quantifying isotopically exchangeable hydrogen and measuring the D/H (i.e., 2H/1H) ratio of isotopically non-exchangeable organic hydrogen in kerogen near magmatic contacts. Thermal stress in coal caused a reduction of isotopically exchangeable hydrogen in kerogen from 5% to 6% in unaltered coal to 2-3% at contacts, mostly due to elimination of functional groups (e.g., {single bond}OH, {single bond}COOH, {single bond}NH2). In contrast to all previously published data on D/H in thermally matured organic matter, the more mature kerogen near the two dike contacts is D-depleted, which is attributed to (i) thermal elimination of D-enriched functional groups, and (ii) thermal drying of hydrologically isolated coal prior to the onset of cracking reactions, thereby precluding D-transfer from relatively D-enriched water into kerogen. Maxima in organic nitrogen concentration and in the atomic N/C ratio of kerogen at a distance of ???2.5 to ???3.5 m from the thicker dike indicate that reactive N-compounds had been pyrolytically liberated at high temperature closer to the contact, migrated through the coal seam, and recombined with coal kerogen in a zone of lower temperature. The same principle extends to organic carbon, because a strong ??13Ckerogen vs. ??15Nkerogen correlation across 5.5 m of coal adjacent to the thicker dike indicates that coal was functioning as a flow-through reactor along a dynamic thermal gradient facilitating back

Nuevos datos sobre mineralizaciones de vermiculita asociadas a rocas ultrabásicas de la provincia de Málaga: Carratraca

Directory of Open Access Journals (Sweden)

Luque, F. J.

1986-12-01

Full Text Available The vermiculite studied in this paper is located within a pegmatitic pocket-like dike in the ultramafic massif of Sierra de Aguas (Carratraca , Málaga. The behaviour of natural and Mg-saturated samples is that of a trioctahedral vermiculite. Nevertheless, when the samples are saturated with K+, no collapse to 10 A is observed. This fact is probably due to the presence of brucitic layers in the interlayer space of the vermiculite, although a true chlorite structure is not reached. A genesis of vermiculite, from a magnesium-rich mica, temporally related with the meteoric serpentinization of the massif is proposed. Moreover, the genetic relationship of these verrniculitebearing dikes with the ultramafic massifs is discussed.

La vermiculita estudiada en este trabajo se encuentra en un dique-bolsada de textura pegmatítica situado en el macizo ultramáfico de la Sierra de Aguas (Carratraca, Málaga. El comportamiento de las muestras naturales y saturadas con Mg⁺⁺ corresponde al esperado para una vermiculita trioctaédrica. Sin embargo, cuando las muestras se han tratado con K⁺ se observa que no colapsan a 10 A. Este hecho es atribuido a la presencia de capas brucíticas en el espacio interlaminar de la vermiculita, aunque sin llegar a formarse una auténtica clorita. El origen de la vermiculita, a partir de una mica original rica en magnesio, se relaciona temporalmente con la serpentinización meteórica del macizo. Asimismo se discute la posibilidad de una relación genética directa de estos diques con vermiculita y los macizos ultramáficos.

Nickel-tolerant ectomycorrhizal Pisolithus albus ultramafic ecotype isolated from nickel mines in New Caledonia strongly enhance growth of the host plant Eucalyptus globulus at toxic nickel concentrations.

Science.gov (United States)

Jourand, Philippe; Ducousso, Marc; Reid, Robert; Majorel, Clarisse; Richert, Clément; Riss, Jennifer; Lebrun, Michel

2010-10-01

Ectomycorrhizal (ECM) Pisolithus albus (Cooke & Massee), belonging to the ultramafic ecotype isolated in nickel-rich serpentine soils from New Caledonia (a tropical hotspot of biodiversity) and showing in vitro adaptive nickel tolerance, were inoculated to Eucalyptus globulus Labill used as a Myrtaceae plant-host model to study ectomycorrhizal symbiosis. Plants were then exposed to a nickel (Ni) dose-response experiment with increased Ni treatments up to 60 mg kg( - )(1) soil as extractable Ni content in serpentine soils. Results showed that plants inoculated with ultramafic ECM P. albus were able to tolerate high and toxic concentrations of Ni (up to 60 μg g( - )(1)) while uninoculated controls were not. At the highest Ni concentration tested, root growth was more than 20-fold higher and shoot growth more than 30-fold higher in ECM plants compared with control plants. The improved growth in ECM plants was associated with a 2.4-fold reduction in root Ni concentration but a massive 60-fold reduction in transfer of Ni from root to shoots. In vitro, P. albus strains could withstand high Ni concentrations but accumulated very little Ni in its tissue. The lower Ni uptake by mycorrhizal plants could not be explained by increased release of metal-complexing chelates since these were 5- to 12-fold lower in mycorrhizal plants at high Ni concentrations. It is proposed that the fungal sheath covering the plant roots acts as an effective barrier to limit transfer of Ni from soil into the root tissue. The degree of tolerance conferred by the ultramafic P. albus isolates to growth of the host tree species is considerably greater than previously reported for other ECM. The primary mechanisms underlying this improved growth were identified as reduced Ni uptake into the roots and markedly reduced transfer from root to shoot in mycorrhizal plants. The fact that these positive responses were observed at Ni concentrations commonly observed in serpentinic soils suggests that

Ultramafic clasts from the South Chamorro serpentine mud volcano reveal a polyphase serpentinization history of the Mariana forearc mantle

Science.gov (United States)

Kahl, Wolf-Achim; Jöns, Niels; Bach, Wolfgang; Klein, Frieder; Alt, Jeffrey C.

2015-06-01

Serpentine seamounts located on the outer half of the pervasively fractured Mariana forearc provide an excellent window into the forearc devolatilization processes, which can strongly influence the cycling of volatiles and trace elements in subduction zones. Serpentinized ultramafic clasts recovered from an active mud volcano in the Mariana forearc reveal microstructures, mineral assemblages and compositions that are indicative of a complex polyphase alteration history. Petrologic phase relations and oxygen isotopes suggest that ultramafic clasts were serpentinized at temperatures below 200 °C. Several successive serpentinization events represented by different vein generations with distinct trace element contents can be recognized. Measured in situ Rb/Cs ratios are fairly uniform ranging between 1 and 10, which is consistent with Cs mobilization from sediments at lower temperatures and lends further credence to the low-temperature conditions proposed in models of the thermal structure in forearc settings. Late veins show lower fluid mobile element (FME) concentrations than early veins, suggesting a decreasing influence of fluid discharge from the subducting slab on the composition of the serpentinizing fluids. The continuous microfabric and mineral chemical evolution observed in the ultramafic clasts may have implications as to the origin and nature of the serpentinizing fluids. We hypothesize that opal and smectite dehydration produce quartz-saturated fluids with high FME contents and Rb/Cs between 1 and 4 that cause the early pervasive serpentinization. The partially serpentinized material may then be eroded from the basal plane of the suprasubduction mantle wedge. Serpentinization continued but the interacting fluids did not carry a pronounced sedimentary signature, either because FMEs were no longer released from the slab, or due to an en route loss of FMEs. Late chrysotile veins that document the increased access of fluids in a now fluid-dominated regime are

The Production of Methane, Hydrogen, and Organic Compounds in Ultramafic-Hosted Hydrothermal Vents of the Mid-Atlantic Ridge

Science.gov (United States)

Charlou, J.L.; Holm, N.G.; Mousis, O.

2015-01-01

Abstract Both hydrogen and methane are consistently discharged in large quantities in hydrothermal fluids issued from ultramafic-hosted hydrothermal fields discovered along the Mid-Atlantic Ridge. Considering the vast number of these fields discovered or inferred, hydrothermal fluxes represent a significant input of H2 and CH4 to the ocean. Although there are lines of evidence of their abiogenic formation from stable C and H isotope results, laboratory experiments, and thermodynamic data, neither their origin nor the reaction pathways generating these gases have been fully constrained yet. Organic compounds detected in the fluids may also be derived from abiotic reactions. Although thermodynamics are favorable and extensive experimental work has been done on Fischer-Tropsch-type reactions, for instance, nothing is clear yet about their origin and formation mechanism from actual data. Since chemolithotrophic microbial communities commonly colonize hydrothermal vents, biogenic and thermogenic processes are likely to contribute to the production of H2, CH4, and other organic compounds. There seems to be a consensus toward a mixed origin (both sources and processes) that is consistent with the ambiguous nature of the isotopic data. But the question that remains is, to what proportions? More systematic experiments as well as integrated geochemical approaches are needed to disentangle hydrothermal geochemistry. This understanding is of prime importance considering the implications of hydrothermal H2, CH4, and organic compounds for the ocean global budget, global cycles, and the origin of life. Key Words: Hydrogen—Methane—Organics—MAR—Abiotic synthesis—Serpentinization—Ultramafic-hosted hydrothermal vents. Astrobiology 15, 381–399. PMID:25984920

Resonance oscillations of the Soufrière Hills Volcano (Montserrat, W.I.) magmatic system induced by forced magma flow from the reservoir into the upper plumbing dike

Science.gov (United States)

Chen, Chin-Wu; Huang, Hsin-Fu; Hautmann, Stefanie; Sacks, I. Selwyn; Linde, Alan T.; Taira, Taka'aki

2018-01-01

Short-period deformation cycles are a common phenomenon at active volcanoes and are often attributed to the instability of magma flow in the upper plumbing system caused by fluctuations in magma viscosity related to cooling, degassing, and crystallization. Here we present 20-min periodic oscillations in ground deformation based on high-precision continuous borehole strain data that were associated with the 2003 massive dome-collapse at the Soufrière Hills Volcano, Montserrat (West Indies). These high-frequency oscillations lasted 80 min and were preceded by a 4-hour episode of rapid expansion of the shallow magma reservoir. Strain amplitude ratios indicate that the deformational changes were generated by pressure variations in the shallow magma reservoir and - with reversed polarity - the adjacent plumbing dike. The unusually short period of the oscillations cannot be explained with thermally induced variations in magma properties. We investigate the underlying mechanism of the oscillations via a numerical model of forced magma flow through a reservoir-dike system accounting for time-dependent dilation/contraction of the dike due to a viscous response in the surrounding host rock. Our results suggest that the cyclic pressure variations are modulated by the dynamical interplay between rapid expansion of the magma chamber and the incapacity of the narrow dike to take up fast enough the magma volumes supplied by the reservoir. Our results allow us to place first order constraints on the viscosity of crustal host rocks and consequently its fractional melt content. Hence, we present for the first time crustal-scale in situ measurements of rheological properties of mush zones surrounding magmatic systems.

26Al-26Mg deficit dating ultramafic meteorites and silicate planetesimal differentiation in the early Solar System?

DEFF Research Database (Denmark)

Baker, Joel A.; Schiller, Martin; Bizzarro, Martin

2012-01-01

Meteorites with significantly sub-chondritic Al/Mg that formed in the first 2million years of the Solar System should be characterised by deficits in the abundance of Mg (d Mg ) due to the absence of in-growth of Mg from the decay of short-lived Al (t =0.73Myr). However, these Mg deficits...... will be small (d Mg >-0.037‰) even for material that formed at the same time as the Solar System's oldest solids - calcium-aluminium-rich inclusions - and thus measurement of these deficits is analytically challenging.Here, we report on a search for Mg deficits in three types of ultramafic meteorites...

Geophysical evidence for an extensive Pie de Palo Complex mafic-ultramafic belt, San Juan, Argentina

Science.gov (United States)

Chernicoff, Carlos J.; Vujovich, Graciela I.; van Staal, Cees R.

2009-12-01

The recent completion of a high-resolution aeromagnetic survey over the Pie de Palo uplift of the western Sierras Pampeanas has revealed an area of large magnetic anomalies associated with the Pie de Palo Complex. The Las Pirquitas thrust, which has transported and uplifted the Pie de Palo Complex, is recognized for at least 30 km in a roughly NE direction along the western boundary of the Pie de Palo Complex, beyond its limited outcrop. The type of sediments of the Caucete Group in the footwall of the Las Pirquitas thrust, which are regarded as the leading edge of the Precordillera terrane, are associated with much less pronounced magnetic anomalies. In addition, a conspicuous, NNE trending, broad magnetic high stands out in the survey, several kilometers to the east of the main outcrops of the Pie de Palo Complex; this broad magnetic anomaly bisects the Pie de Palo basement block, and continues further south at least as far as 32°S, the southern boundary of the latest aeromagnetic survey. This magnetic anomaly is interpreted to represent a structure corresponding to the Grenvillian Precordillera-Pie de Palo tectonic boundary zone, and would comprise the buried largest part of the mafic-ultramafic belt. The geophysical model of the magnetic data indicates that the boundary zone dips to the east, possibly suggesting the existence of a set of synthetic east dipping, west-verging thrusts, of which only one major structure (Las Pirquitas thrust) is exposed; the possibility of other slivers of upthrust boundary zone material cannot be excluded. It is considered that the Pie de Palo Complex represents a small sliver upthrust from the unexposed boundary zone material (containing highly magnetic mafic-ultramafic rocks). The east-dipping, west verging structures associated with the Pie de Palo Complex are suggested to represent an Ordovician reactivation of a Grenvillian suture zone developed when the Precordillera basement and Pie de Palo terrane docked; this

Intense CH{sub 4} plumes generated by serpentinization of ultramafic rocks at the intersection of the 15{degree}20[minutes]N fracture zone and the Mid-Atlantic Ridge

Energy Technology Data Exchange (ETDEWEB)

Charlou, J.L.; Fouquet, Y.; Bougault, H.; Donval, J.P.; Etoubleau, J. [IFREMER Centre de Brest, Plouzane (France). Dept. Geosciences Marines; Jean-Baptiste, P.; Dapoigny, A. [CEA Saclay, Gif-sur-Yvette (France); Appriou, P. [Univ. de Bretagne Occidentale, Brest (France); Rona, P.A. [Rutgers-the State Univ. of New Jersey, New Brunswick, NJ (United States)

1998-07-01

As part of the FARA French-US Program designed to study the Mid-Atlantic Ridge (MAR) between 15{degree}N and the Azores, twenty-three dives with the submersible Nautile were conducted during the French-US Faranaut 15N cruise on the eastern and western parts of the Fracture Zone/Ridge axis intersection. South of the eastern ridge-transform fault intersection, nine Nautile dives were made within the rift valley and along the western rift valley wall. CH{sub 4} concentrations in the bottom waters reach 53.2 nmol/kg along faulted zones on top and on the east flank of the ultramafic inner corner high where serpentinized rocks outcrop. No {sup 3}He anomaly is associated with methane, ruling out any primary mantle component. High CH{sub 4} anomalies (up to 22 nmol/kg) are also present in the bottom waters of the rift valley northern segment on both the western and eastern valley walls and on the inner high adjacent to the eastern wall where ultramafic rocks outcrop. Seven vertical hydrocasts carried out in the axial valley (4500 M deep) show an intense CH{sub 4} anomaly, with a maximum (35.8 nmol/kg) at 3200 m depth. CH{sub 4} concentrations of 9.9--14.9 nmol/kg are also present on the western wall along the 3200 m isobath. CH{sub 4} output from ultramafic outcrops on the western and eastern intersections of the Fracture Zone with the MAR is believed to reflect ongoing serpentinization.

Mineral potential for nickel, copper, platinum group elements(PGE), and chromium deposits hosted in ultramafic rocks in the Islamic Republic of Mauritania (phase V, deliverable 67): Chapter G in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

Science.gov (United States)

Taylor, Cliff D.; Marsh, Erin; Anderson, Eric D.

2015-01-01

PRISM-I summary documents mention the presence of mafic-ultramafic igneous intrusive rocks in several areas of Mauritania and a number of chromium (Cr) and copper-nickel (Cu-Ni (±Co, Au)) occurrences associated with them. Permissive geologic settings generally include greenstone belts of any age, layered mafic-ultramafic and unlayered gabbro-anorthosite intrusive complexes in cratonic settings, ophiolite complexes, flood basalt provinces, and fluid-rich shear zones cutting accumulations of mafic-ultramafic rocks. Regions of Mauritania having these characteristics that are discussed in PRISM-I texts include the Mesoarchean greenstone belts of the TasiastTijirit terrane in the southwestern Rgueïbat Shield, two separate layered ultramafic complexes in the Amsaga Complex west of Atar, serpentinized metadunites in Mesoarchean rocks of the Rgueïbat Shield in the Zednes map sheet, several lateritized annular mafic-ultramafic complexes in the Paleoproterozoic northwestern portion of the Rgueïbat Shield, and the serpentinized ophiolitic segments of the Gorgol Noir Complex in the axial portion of the southern Mauritanides. Bureau de Recherches Géologiques et Minières (BRGM) work in the “Extreme Sud” zone also suggests that small copper occurrences associated with the extensive Jurassic microgabbroic intrusive rocks in the Taoudeni Basin of southeastern Mauritania could have potential for magmatic Cu-Ni (PGE, Co, Au) sulfide mineralization. Similarly, Jurassic mafic intrusive rocks in the northeastern Taoudeni Basin may be permissive. Known magmatic Cu-Ni deposits of these types in Mauritania are few in number and some uncertainty exists as to the nature of several of the more important ones.

Carbonate Cements from the Sverrefjell and Sigurdfjell Volcanoes, Svalbard Norway: Analogs for Martian Carbonates

Science.gov (United States)

Blake, D. F.; Treiman, A. H.; Morris, R.; Bish, D.; Amundsen, H.E.F.; Steele, A.

2011-01-01

The Sverrefjell and Sigurdfjell volcanic complexes erupted at 1Ma on Svalbard, Norway. Sverrefjell is a cone of cinders, pillow lavas and dikes; Sigurdfjell is elongate in outcrop and may represent a fissure eruption [1]. The lavas of both volcanos were volatile rich. The volcanos erupted under ice and were subsequently dissected by glaciation (glacial eratics are present on most of Sverrefjell, even on its summit). Eruption beneath an ice sheet is inferred, based on the presence of pillow lavas from near sea level to 1000 m above sea level. Sverrefjell contains the largest fraction of ultramafic xenoliths of any volcanic complex in the world, in places accounting for as much as 50% of the volume of the outcrop. The Sverrefjell and Sigurdfell volcanos contain carbonate cements of several varieties: (1) Amundsen [2] reported Mg-Fe-rich carbonate in sub-mm globules in basalts and ultramafic xenoliths from the volcanos. These globules are the best terrestrial analogs to the carbonate globules in the Mars meteorite ALH84001 [3]. (2) Thick (1-3 cm) coatings of carbonate cement drape the walls of vertical volcanic pipes or conduits on the flanks and near the present summit of Sverrefjell. Similar occurrences are found on Sigurdfjell. (3) Breccia-filled pipes or vents occur on Sverrefjell and Siggurdfjell in which the breccia fragments are cemented by carbonate. The fragments themselves commonly contain carbonate globules similar to those found in the basalts and ultramafic xenoliths.

PTAGIS - Development of Large PIT-Tag Antennas to Estimate Migration Timing and Survival for Adult Salmonids near Pile Dikes in the Columbia River Estuary

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — We continued research and development of a passive PIT-tag detection system along a pile dike in the estuary (rkm 70). Target fish for this system are returning...

Mineralogía y Geotermometría de los diques ácidos con grafito asociados a rocas ultramáficas de la Serranía de Ronda. Málaga

Directory of Open Access Journals (Sweden)

Galán, E.

1987-12-01

Full Text Available A geological, mineralogical and geothermometrical study of a group of acidic graphitebearing dikes from the Ronda ultramafic massif (Málaga province has been carried out. These dikes are hosted in serpentinized peridotites and they appear near the eastern and southern contacts of the massif. On the basis of their mineralogical features, two rock types have been distinguished, since they show or not hydrothermal alteration processes. Unaltered dikes present a mineral association composed by cordierite, garnet, quartz, biotite, graphite, Fe·Ti oxides, sulfides and minor amounts of plagioclase, sillimanite, hercynite and zircon. In the hydrothermally transformed dikes, this original mineral assemblage has been more or less erased, occuring "pinitization" of cordierite, chloritization of garnet and biotite, and ilmenite is transformed to "Ieucoxene". Graphite is a main mineral in both the unaltered and transformed dikes, ranging their abundance about 15%. The geothermometrical study has been done using the biotite-garnet pair and the value of graphite "c" parameter. The estimated temperatures are clase to 800º C, that are in good agreement with the given temperature for the emplacement of the ultramafic body. From all these data, formation of the dikes by anateetic partial melting of the sedimentary wall rocks (belonging to the Blanca Unit, in presence of a CO2- and CH4 rich fluid that migrated from the metamorphosed sediments towards low pressure fractures zones inside the peridotite massif, is proposed.Se ha realizado un estudio geológico, mineralógico y geotermométrico de un grupo de diques ácidos con grafito localizados en peridotitas serpentinizadas del macizo ultrabásico de Ronda (Málaga. Estos diques presentan distintos estados de alteración hidrotermal. En los diques inalterados, la paragénesis está compuesta por cordierita, granate, cuarzo, biotita, grafito, ilmenita, rutilo, sulfuros y pequeñas cantidades de plagioclasa

Petrology and geochemistry of meta-ultramafic rocks in the Paleozoic Granjeno Schist, northeastern Mexico: Remnants of Pangaea ocean floor

Science.gov (United States)

Torres-Sánchez, Sonia Alejandra; Augustsson, Carita; Jenchen, Uwe; Rafael Barboza-Gudiño, J.; Alemán Gallardo, Eduardo; Ramírez Fernández, Juan Alonso; Torres-Sánchez, Darío; Abratis, Michael

2017-08-01

The Granjeno Schist is a meta-volcanosedimentary upper Paleozoic complex in northeastern Mexico. We suggest different tectonic settings for metamorphism of its serpentinite and talc-bearing rocks based on petrographic and geochemical compositions. According to the REE ratios (LaN/YbN = 0.51 -20.0 and LaN/SmN = 0.72-9.1) and the enrichment in the highly incompatible elements Cs (0.1 ppm), U (2.8 ppm), and Zr (60 ppm) as well as depletion in Ba (1 - 15 ppm), Sr (1 -184 ppm), Pb (0.1 -14 ppm), and Ce (0.1 -1.9 ppm) the rocks have mid-ocean ridge and subduction zones characteristics. The serpentinite contains Al-chromite, ferrian chromite and magnetite. The Al-chromite is characterized by Cr# of 0.48 to 0.55 suggesting a MORB origin, and Cr# of 0.93 to 1.00 for the ferrian chromite indicates a prograde metamorphism. We propose at least two serpentinization stages of lithospheric mantle for the ultramafic rock of the Granjeno Schist, (1) a first in an ocean-floor environment at sub-greenschist to greenschist facies conditions and (2) later a serpentinization phase related to the progressive replacement of spinel by ferrian chromite and magnetite at greenschist to low amphibolite facies conditions during regional metamorphism. The second serpentinization phase took place in an active continental margin during the Pennsylvanian. We propose that the origin of the ultramafic rocks is related to an obduction and accretional event at the western margin of Pangea.

Petrology and geochemistry of meta-ultramafic rocks in the Paleozoic Granjeno Schist, northeastern Mexico: Remnants of Pangaea ocean floor

Directory of Open Access Journals (Sweden)

Torres-Sánchez Sonia Alejandra

2017-08-01

Full Text Available The Granjeno Schist is a meta-volcanosedimentary upper Paleozoic complex in northeastern Mexico. We suggest different tectonic settings for metamorphism of its serpentinite and talc-bearing rocks based on petrographic and geochemical compositions. According to the REE ratios (LaN/YbN = 0.51 –20.0 and LaN/SmN = 0.72–9.1 and the enrichment in the highly incompatible elements Cs (0.1 ppm, U (2.8 ppm, and Zr (60 ppm as well as depletion in Ba (1 – 15 ppm, Sr (1 –184 ppm, Pb (0.1 –14 ppm, and Ce (0.1 –1.9 ppm the rocks have mid-ocean ridge and subduction zones characteristics. The serpentinite contains Al-chromite, ferrian chromite and magnetite. The Al-chromite is characterized by Cr# of 0.48 to 0.55 suggesting a MORB origin, and Cr# of 0.93 to 1.00 for the ferrian chromite indicates a prograde metamorphism. We propose at least two serpentinization stages of lithospheric mantle for the ultramafic rock of the Granjeno Schist, (1 a first in an ocean-floor environment at sub-greenschist to greenschist facies conditions and (2 later a serpentinization phase related to the progressive replacement of spinel by ferrian chromite and magnetite at greenschist to low amphibolite facies conditions during regional metamorphism. The second serpentinization phase took place in an active continental margin during the Pennsylvanian. We propose that the origin of the ultramafic rocks is related to an obduction and accretional event at the western margin of Pangea.

Genesis of the Permian Kemozibayi sulfide-bearing mafic-ultramafic intrusion in Altay, NW China: Evidence from zircon geochronology, Hf and O isotopes and mineral chemistry

Science.gov (United States)

Tang, Dongmei; Qin, Kezhang; Xue, Shengchao; Mao, Yajing; Evans, Noreen J.; Niu, Yanjie; Chen, Junlu

2017-11-01

The recently discovered Kemozibayi mafic-ultramafic intrusion and its associated magmatic Cu-Ni sulfide deposits are located at the southern margin of the Chinese Altai Mountain, Central Asian Orogenic Belt in north Xinjiang, NW China. The intrusion is composed of olivine websterite, norite, gabbro and diorite. Disseminated and net-textured Ni-Cu sulfide ores are hosted in the center of the gabbro. In this work, new zircon U-Pb ages, Hf-O isotopic and sulfide S isotopic data, and whole rock and mineral chemical analyses are combined in order to elucidate the characteristics of the mantle source, nature of subduction processes, degree of crustal contamination, geodynamic setting of bimodal magmatism in the region, and the metallogenic potential of economic Cu-Ni sulfide deposit at depth. SIMS zircon U-Pb dating of the gabbro yields Permian ages (278.3 ± 1.9 Ma), coeval with the Kalatongke Cu-Ni deposit and with Cu-Ni deposits in the Eastern Tianshan and Beishan areas. Several lines of evidence (positive εHf(t) from + 7.1 to + 13.3, Al2O3, TiO2 and SiO2 contents in clinopyroxene from olivine websterite, high whole rock TiO2 contents) suggest that the primary magma of the Kemozibayi intrusion was a calc-alkaline basaltic magma derived from depleted mantle, and that the degree of partial melting in the magma source was high. The evolution of the Kemozibayi mafic-ultramafic complex was strongly controlled by fractional crystallization and the crystallization sequence was olivine websterite, norite, and then gabbro. This is evidenced by whole rock Fe2O3 contents that are positively correlated with MgO and negatively correlated with Al2O3, CaO and Na2O, similar LREE enrichment and negative Nb, Ta, Hf anomalies in chondrite and primitive mantle-normalized patterns, and a decrease in total REE and trace elements contents and magnetite content from gabbro through to norite and olivine websterite. Varied and low εHf(t) (+ 7.1 to + 13.3) and high δ18O values (+ 6.4‰ to

Metamorphism Near the Dike-Gabbro Transition in the Ocean Crust Based on Preliminary Results from Oman Drilling Project Hole GT3A

Science.gov (United States)

Manning, C. E.; Nozaka, T.; Harris, M.; Michibayashi, K.; de Obeso, J. C.; D'Andres, J.; Lefay, R.; Leong, J. A. M.; Zeko, D.; Kelemen, P. B.; Teagle, D. A. H.

2017-12-01

Oman Drilling Project Hole GT3A intersected 400 m of altered basaltic dikes, gabbros, and diorites. The 100% recovery affords an unprecedented opportunity to study metamorphism and hydrothermal alteration near the dike-gabbro transition in the ocean crust. Hydrothermal alteration is ubiquitous; all rocks are at least moderately altered, and mean alteration intensity is 54%. The earliest alteration in all rock types is background replacement of igneous minerals, some of which occurred at clinopyroxene amphibolite facies, as indicated by brown-green hornblende, calcic plagioclase, and secondary cpx. In addition, background alteration includes greenschist, subgreenschist, and zeolite facies minerals. More extensive alteration is locally observed in halos around veins, patches, and zones related to deformation. Dense networks of hydrothermal veins record a complex history of fluid-rock alteration. During core description, 10,727 individual veins and 371 vein networks were logged in the 400 m of Hole GT3A. The veins displayed a range of textures and connectivities. The total density of veins in Hole GT3A is 26.8 veins m-1. Vein density shows no correlation with depth, but may be higher near dike margins and faults. Vein minerals include amphibole, epidote, quartz, chlorite, prehnite, zeolite (chiefly laumontite) and calcite in a range of combinations. Analysis of crosscutting relations leads to classification of 4 main vein types. In order of generally oldest to youngest these are: amphibole, quartz-epidote-chlorite (QEC), zeolite-prehnite (ZP), and calcite. QEC and ZP vein types may contain any combination of minerals except quartz alone; veins filled only by quartz may occur at any relative time. Macroscopic amphibole veins are rare and show no variation with depth. QEC vein densities appear to be higher (>9.3 veins m-1) in the upper 300 m of GT3A, where dikes predominate. In contrast, there are 5.5 veins m-1 at 300-400 m, where gabbros and diorites are abundant. ZP

Potassium-argon dating of polyhalite in southeastern New Mexico

International Nuclear Information System (INIS)

Brookins, D.G.; Register, J.K. Jr.; Krueger, H.W.

1980-01-01

Polyhalite, K 2 Ca 2 Mg(SO 4 ) 4 .2H 2 O, is an important mineral in many evaporites. Although its use for K-Ar dating has never been investigated, present results indicate that it is a very useful mineral for dating events ranging from the time of potash mineralization to any younger events which may have affected the evaporite. Five K-Ar dates on pure polyhalite, including two from included material and from beds distorted by the formation of a rubble chimney, yield dates between 198 and 216 Myp, in good agreement with Rb-Sr dates and the diagenetic age of the potash deposits from the same rocks. Two polyhalites mixed with sylvite gave lower dates, which is to be expected because of radiogenic 40 Ar loss from the sylvite phase. One polyhalite, formed after the intrusion of a 31 Myr lamprophyre dike, yielded 21 Myr. Collectively, the results indicate that pure polyhalite is satisfactory for K-Ar dating and may provide critical age information in studies of the geologic history of the evaporite sequences. (author)

Zircon and baddeleyite from the economic ultramafic-mafic Noril'sk-1 intrusion (Russia): Hf-isotope constraints on source composition

Science.gov (United States)

Malitch, K. N.; Belousova, E. A.; Badanina, I. Yu.; Griffin, W. L.

2012-04-01

The ultramafic-mafic Noril'sk-1 intrusion in the northwestern part of the Siberian Craton (Russia) represents one of three known Noril'sk-type, ore-bearing intrusions, which host one of the world's major economic sulphide platinum-group-element (PGE)-Cu-Ni deposits. Zircon and baddeleyite dated previously both by SHRIMP (i.e. 248.0 ± 3.7 Ma, Campbell et al. 1992) and ID-TIMS (251.1 ± 3.6 Ma, Kamo et al. 1996) have been restricted to one lithology (e.g. leucogabbro) of the Noril'sk-1 intrusion. To better constrain the age of igneous event and sources involved in its generation our multi-technique study utilized ten rock samples characteristic of unmineralized and mineralized lithologies. The rocks investigated comprise (from top to bottom) gabbro-diorite (sample N1-1), leucogabbro (N1-3), olivine-free gabbro (N1-2 and N1-4), olivine-bearing gabbro (N1-5), olivine gabbro (N1-6), plagiowehrlite and plagiodunite (N1-7), taxitic-textured rocks comprising melanotroctolite, olivine gabbro with relics of ultramafic rocks (N1-8, N1-9) and contact fine-grained gabbro (N1-10). Sulphide PGE-Cu-Ni ores occur in ultramafic (N1-7) and taxitic-textured rocks (N1-8 and N1-9), which have thickness of about 17 m, whereas the low-sulphide horizon of about 1 m thick occurs in the upper part of intrusion (N1-3). In situ U-Pb analyses of zircon from these rocks, combined with detailed study of crystal morphology and internal structure, identify four zircon populations (Malitch et al. 2012). The U-Pb ages of baddeleyite and the defined zircon populations cover a significant time span, from Late Paleozoic to Early Mesozoic (e.g., 290 ± 2.8; 261.3 ± 1.6; 245.7 ± 1.1; 236.5 ± 1.8 and 226.7 ± 0.9 Ma). The established distribution of U-Pb ages implies that crystallization of baddeleyite and zircon corresponds to several stages of protracted evolution of ultramafic-mafic magmas at deep-seated staging chambers and/or probably characterizes interaction of distinct magmas during formation

Composition of coarse-grained magnetite from pegmatite dikes related to plutons of quartz monzonite in the Jabal Lababa area, Kingdom of Saudi Arabia

Science.gov (United States)

Overstreet, William C.; Mousa, Hassan; Matzko, John J.

1985-01-01

Crystals of magnetite as large as 30 mm long and 7 mm thick are locally present in quartz-rich zones of interior and exterior pegmatite dikes related to plutons of quartz monzonite in the Jabal Lababa area. Niobium, tin, and yttrium are strongly enriched in six specimens of magnetite from interior pegmatite dikes in a small pluton where these elements form geochemical anomalies in nonmagnetic heavy-mineral concentrates from wadi sediment. Less abundant anomalous elements in the magnetite are molybdenum, lead, and zirconium, which also tend to be present in anomalous amounts in the nonmagnetic concentrates from the niobium-bearing pluton. The most anomalous trace element in the magnetite is zinc, which is at least 10 times as abundant as it is in the quartz monzonite plutons or in the nonmagnetic concentrates. The capacity of magnetite to scavenge molybdenum, zinc, niobium, lead, tin, yttrium, and zirconium suggests the possible utility of magnetite as a geochemical sample medium.

Paleointensity determination on Neoarchaean dikes within the Vodlozerskii terrane of the Karelian craton

Science.gov (United States)

Shcherbakova, V. V.; Lubnina, N. V.; Shcherbakov, V. P.; Zhidkov, G. V.; Tsel'movich, V. A.

2017-09-01

The results of paleomagnetic studies and paleointensity determinations from two Neoarchaean Shala dikes with an age of 2504 Ma, located within the Vodlozerskii terrane of the Karelian craton, are presented. The characteristic components of primary magnetization with shallow inclinations I = -5.7 and 1.9 are revealed; the reliability of the determinations is supported by two contact tests. High paleointensity values are obtained by the Thellier-Coe and Wilson techniques. The calculated values of the virtual dipole moment (11.5 and 13.8) × 1022 A m2 are noticeably higher than the present value of 7.8 × 1022 A m2. Our results, in combination with the previous data presented in the world database, support the hypothesized existence of a period of high paleointensity in the Late Archaean-Early Proterozoic.

DURATION OF GRANITOID MAGMATISM IN PERIPHERAL PARTS OF LARGE IGNEOUS PROVINCES (BASED ON 40AR/39AR ISOTOPIC STUDIES OF ALTAI PERMIAN-TRIASSIC GRANITOIDS

Directory of Open Access Journals (Sweden)

O. A. Gavryushkina

2017-01-01

Full Text Available In large igneous provinces (LIP of fold areas, granitoid rocks are dominant, while mantle-derivated rocks play a subordinate role in rock formation. If magma emissions are impulsive, it may take 25–30 million years for a LIP to form and take shape. In this paper, we present the results of 40Ar/39Ar isotopic studies of Permian-Triassic grani­toids in the Altai region, Russia, and clarify the evolution of this region located at the periphery of the Siberian LIP. These granitoids are very diverse and differ not only in their rock set, but also in the composition features. In the study region, the granodiorite-granite and granite-leucogranite association with the characteristics of I- and S-types as well rare metal ore-bearing leucogranites are observed along with gabbro- and syenite-granite series, including mafic and intermediate rocks with the A2-type geochemical features. The 40Ar/39Ar data obtained in our study suggest that most of the studied granitoids intruded within a short period of time, 254–247 Ma. This timeline is closely related to the formation of granitoids in theKuznetsk basin and dolerite dikes in the Terekta complex (251–248 and 255±5 Ma, respectively, as well as intrusions of lamproite and lamprophyre dikes of the Chuya complex (245–242 and 237–235 Ma. Thus, we conclude that the Altai Permian-Triassic granitoids are varied mainly due to the evolution of mafic magmatism.

Comparison of invasive and non-invasive electromagnetic methods in soil water content estimation of a dike model

International Nuclear Information System (INIS)

Preko, Kwasi; Scheuermann, Alexander; Wilhelm, Helmut

2009-01-01

Water infiltration through a dike model under controlled flooding and drainage conditions was investigated using the gravimetric soil water sampling technique and electromagnetic techniques, in particular ground penetrating radar (GPR) applied in different forms, time domain reflectometry with intelligent microelements (TRIME-TDR) and spatial-time domain reflectometry (S-TDR). The experiments were conducted on the model in two phases. In the first phase, the model was flooded with varying water levels between 0 and 1.25 m above the waterproof base of the model. In the second phase, the characteristics of the temporal water content changes were investigated over a period of 65 days as the flood water drained off from the 1.25 m level. The dike model was constructed with soil of the texture class loamy sand. The aim of the experiment was to investigate whether GPR-based invasive and non-invasive methods were able to quantitatively observe and correctly monitor temporal changes in the volumetric water content (VWC) within embankment dams. The VWC values from the various techniques corresponded very well, especially with low VWC values. A comparison with the VWC of gravimetric soil water sampling showed a satisfactory reproducibility. Characteristic discrepancies were recorded with higher values of the VWC. Under saturated conditions only the invasive methods were able to produce reasonable values of the VWC. After the release of the highest flood level, the drainage phase could be characterized by two invasive methods based on the TDR and GPR techniques

The rheological behaviour of fracture-filling cherts: example of Barite Valley dikes, Barberton Greenstone Belt, South Africa

Science.gov (United States)

Ledevin, M.; Arndt, N.; Davaille, A.; Ledevin, R.; Simionovici, A.

2015-02-01

In the Barberton Greenstone Belt, South Africa, a 100-250 m thick complex of carbonaceous chert dikes marks the transition from the Mendon Formation to the Mapepe Formation (3260 Ma). The sub-vertical- to vertical position of the fractures, the abundance of highly shattered zones with poorly rotated angular fragments and common jigsaw fit, radial structures, and multiple injection features point to repetitive hydraulic fracturing that released overpressured fluids trapped within the shallow crust. The chemical and isotopic compositions of the chert favour a model whereby seawater-derived fluids circulated at low temperature (clay-sized, rounded particles of silica, carbonaceous matter and minor clay minerals, all suspended in a siliceous colloidal solution. The dike geometry and characteristics of the slurry concur on that the chert was viscoelastic, and most probably thixotropic at the time of injection: the penetration of black chert into extremely fine fractures is evidence for low viscosity at the time of injection and the suspension of large country rock fragments in the chert matrix provides evidence of high viscosity soon thereafter. We explain the rheology by the particulate and colloidal structure of the slurry, and by the characteristic of silica suspensions to form cohesive 3-D networks through gelation. Our results provide valuable information about the compositions, physical characteristics and rheological properties of the fluids that circulated through Archean volcano-sedimentary sequences, which is an additional step to understand conditions on the floor of Archean oceans, the habitat of early life.

Multiple magmatism in an evolving suprasubduction zone mantle wedge: The case of the composite mafic-ultramafic complex of Gaositai, North China Craton

Science.gov (United States)

Yang, Fan; Santosh, M.; Tsunogae, T.; Tang, Li; Teng, Xueming

2017-07-01

The suprasubduction zone mantle wedge of active convergent margins is impregnated by melts and fluids leading to the formation of a variety of magmatic and metasomatic rock suites. Here we investigate a composite mafic-ultramafic intrusion at Gaositai, in the northern margin of the North China Craton (NCC). The hornblende gabbro-serpentinite-dunite-pyroxenite-gabbro-diorite suite surrounded by hornblendites of this complex has long been considered to represent an "Alaskan-type" zoned pluton. We present petrologic, mineral chemical, geochemical and zircon U-Pb and Lu-Hf data from the various rock types from Gaositai including hornblende gabbro, serpentinite, dunite, pyroxenite, diorite and the basement hornblendite which reveal the case of multiple melt generation and melt-peridotite interaction. Our new mineral chemical data from the mafic-ultramafic suite exclude an "Alaskan-type" affinity, and the bulk geochemical features are consistent with subduction-related magmatism with enrichment of LILE (K, Rb, and Ba) and LREE (La and Ce), and depletion of HFSE (Nb, Ta, Zr, and Hf) and HREE. Zircon U-Pb geochronology reveals that the hornblendites surrounding the Gaositai complex are nearly 2 billion years older than the intrusive complex and yield early Paleoproterozoic emplacement ages (2433-2460 Ma), followed by late Paleoproterozoic metamorphism (1897 Ma). The serpentinites trace the history of a long-lived and replenished ancient sub-continental lithospheric mantle with the oldest zircon population dated as 2479 Ma and 1896 Ma, closely corresponding with the ages obtained from the basement rock, followed by Neoproterozoic and Phanerozoic zircon growth. The oldest member in the Gaositai composite intrusion is the dunite that yields emplacement age of 755 Ma, followed by pyroxenite formed through the interaction of slab melt and wedge mantle peridotite at 401 Ma. All the rock suites also carry multiple population of younger zircons ranging in age from Paleozoic to

Paleomagnetism of Early Cambrian Itabaiana mafic dikes (NE Brazil) and the final assembly of Gondwana

Science.gov (United States)

Trindade, Ricardo I. F.; D'Agrella-Filho, Manoel S.; Epof, Igor; Brito Neves, Benjamim B.

2006-04-01

Paleomagnetic analysis on 15 early Cambrian mafic dikes from Itabaiana (Paraíba State) yielded a southern (northwestern) direction with steep upward (downward) inclination ( Dm = 167.5°, Im = - 63.7°, α95 = 7.3°). AF and Thermal demagnetization, thermomagnetic curves, and hysteresis results suggest that this component is dominantly carried by fine-grained SD magnetite. The high stability of this component and positive baked contact tests on three dikes indicate it represents a primary thermoremanent magnetization. Ar-Ar analysis on whole-rock samples from two sites provides a strong constraint on the age of the Itabaiana paleomagnetic pole (134.6° E, 34.9° S; A95 = 7.3, K = 28) defined by plateau ages of 525 ± 5 and 526 ± 4 Ma. This pole completely satisfies six out of the seven quality criteria proposed by Van der Voo [R. Van der Voo, The reliability of paleomagnetic data, Tectonophysics 184 (1990) 1-9.] and permits a tight constraint on the Early Cambrian sector of the Gondwana apparent polar wander path. Paleogeographic reconstructions consistent with the available paleomagnetic and geological record show that Gondwana was sutured along three major orogenies, the Mozambique (Brasilano/Pan-African) Orogeny (800-650 Ma), the Kuunga Orogeny (570-530 Ma) and the Pampean-Araguaia Orogeny (540-520 Ma). We suggest that after rifting away from Laurentia at the end of the Neoproterozoic, opening the Iapetus ocean, the Amazonian craton and minor adjoining blocks, such as Rio Apa and Pampia, collided with the proto-Gondwana by Cambrian times at ca. 530-520 Ma. Unless for small adjustments, Gondwana was completely formed by 525 Ma whose paleogeography is defined by the Itabaiana pole.

The MajuagaaA Kimberlite Dike, Maniitsoq Regio, West Greenland: Constraints on an Mg-rich Silicocarbonatitic Melt Composition from Groundmass Mineralogy and Bulk Compositions

DEFF Research Database (Denmark)

Nielsen, Troels F. D.; Sand, Karina Krarup

2008-01-01

The Majuagaa kimberlite dike in the Maniitsoq region, southern West Greenland, is 564 Ma old, 2.5 km long, and up to 2 m wide. It is well exposed and very fresh, allowing detailed petrographic and chemical investigations. Little or no serpentinization is observed, and primary petrographic...

Effects of interaction between ultramafic tectonite and mafic magma on Nd-Pb-Sr isotopic systems in the Neoproterozoic Chaya Massif, Baikal-Muya ophiolite belt

Science.gov (United States)

Amelin, Yuri V.; Ritsk, Eugeni Yu.; Neymark, Leonid A.

1997-04-01

Sm-Nd, Rb-Sr and U-Pb isotopic systems have been studied in minerals and whole rocks of harzburgites and mafic cumulates from the Chaya Massif, Baikal-Muya ophiolite belt, eastern Siberia, in order to determine the relationship between mantle ultramafic and crustal mafic sections. Geological relations in the Chaya Massif indicate that the mafic magmas were emplaced into, and interacted with older solid peridotite. Hand picked, acid-leached, primary rock-forming and accessory minerals (olivine, orthopyroxene, clinopyroxene and plagioclase) from the two harzburgite samples show coherent behavior and yield 147Sm/ 144Nd- 143Nd/ 144Nd and 238U/ 204Pb- 206Pb/ 204Pb mineral isochrons, corresponding to ages of 640 ± 58 Ma (95% confidence level) and 620 ± 71 Ma, respectively. These values are indistinguishable from the crystallization age of the Chaya mafic units of 627 ± 25 Ma (a weighted average of internal isochron Sm-Nd ages of four mafic cumulates). The Rb-Sr and Sm-Nd isotopic systems in the harzburgite whole-rock samples were disturbed by hydrothermal alteration. These alteration-related isotopic shifts mimic the trend of variations in primary isotopic compositions in the mafic sequence, thus emphasizing that isotopic data for ultramafic rocks should be interpreted with great caution. On the basis of initial Sr and Nd values, ultramafic and mafic rocks of the Chaya Massif can be divided into two groups: (1) harzburgites and the lower mafic unit gabbronorites withɛ Nd = +6.6 to +7.1 andɛ Sr = -11 to -16; and (2) websterite of the lower unit and gabbronorites of the upper mafic unit:ɛ Nd = +4.6 to +6.1 andɛ Sr = -8 to -9. Initial Pb isotopic ratios are identical in all rocks studied, with mean values of 206Pb/ 204Pb= 16.994 ± 0.023 and 207Pb/ 204Pb= 15.363 ± 0.015. The similarity of ages and initial isotopic ratios within the first group indicates that the isotopic systems in the pre-existing depleted peridotite were reset by extensive interaction with

U-Pb isotope systematics in josephinites and associated rocks

Energy Technology Data Exchange (ETDEWEB)

Goepel, C.; Manhes, G.; Allegre, C.J. (Lab. Geochimie et Cosmochimie, I.P.G., 75 - Paris (France))

1990-02-01

Josephinite nodules, composed of metallic nickel iron alloy intergrown with andradite garnet, are found in the peridotitic section of an obducted ophiolite in SW Oregon. The origin of josephinite is widely debated: for example, previous investigation have proposed it as a byproduct of low temperature synserpentinization processes linked to the intrusion of dikes or and its derivation from primitive mantle, conceivably from as deep as the core mantle boundary. We report U-Pb data from josephinites, wyrdite (a rock associated with josephinite) consisting of rutile and ilmente intergrown with silicates, and their surrounding rocks (hornblende diorites and harzburgites). The measured Pb isotopic composition of all decontaminated, leached josephinite metal samples plots in the Pb-Pb diagram just above/in the MORB field, while the first leachates are characterized by higher {sup 207}Pb/{sup 204}Pb ratios. The isotopic Pb composition measured in the leachates of the wyrdite defines a line whose slope corresponds to an age of 159{plus minus}8 Myr. The harzburgites show a wide spread in Pb isotopic compositions; all samples lie above the MORB field and three samples plot to the left side of the 4.55 AE geochron. The hornblende diorite dikes, characterized by the highest U and Pb concentrations of all studied rocks, plot in the MORB field. None of these different rocks is characterized by a single or homogeneous Pb composition. All samples are affected by secondary alteration processes: the circulation of hydrothermal fluids disturbed the dikes and ultramafic rocks and serpentinization processes have affected harzburgites, josephinites, and wyrdites. Thus the Pb isotopic composition measured today represents a mixture of initial Pb, radiogenic Pb and inherited Pb in variable proportions. Concerning the origin of josephinite these results show a close relationship between josephinite, wyrdite, and the dikes. (orig./WB).

Geochronology and Sr–Nd–Hf isotopic composition of the granites, enclaves, and dikes in the Karamay area, NW China: Insights into late Carboniferous crustal growth of West Junggar

Directory of Open Access Journals (Sweden)

Di Li

2015-03-01

Full Text Available New whole-rock major and trace elements, and zircon U–Pb and Hf–Nd isotope compositions are reported for the Karamay dikes, enclaves, and host granites in the West Junggar, NW China. Zircon U–Pb dating of the Karamay pluton yields an age of 300.7 ± 2.3 Ma for the enclave and 300.0 ± 2.6 Ma for the host granite, which was intruded by dike with an age of 298 Ma. The host granites exhibit relatively low SiO2 contents and A/CNK and Ga/Al ratios, low initial 87Sr/86Sr ratios (0.703421–0.703526 and positive εHf(t (5.5–14.1 and εNd(t (7.3–8.1 values with a young model age, suggesting that they are I-type granites and were mainly derived from a juvenile lower crustal source. The enclaves and dikes belong to an andesitic calc-alkaline series and have high MgO concentrations at low silica content and positive εHf(t (7.6–13.2, 14.2–14.9 and εNd(t (6.8–8.3, ∼6.9 values. They are enriched in LILEs (Rb, Ba and U and LREE and depleted in HFSEs (Nb and Ta with insignificant negative Eu anomalies, indicating that the melts were derived from an enriched lithospheric mantle modified by subducted oceanic crust-derived melts and minor fluids, followed by fractional crystallization. The Karamay host granites and enclaves are of mixed origin and are most probably formed by the interaction between the lower crust- and lithospheric mantle-derived magmas, and were intruded by the unmixed dikes subsequently. The upwelling mantle through a slab window in an island arc environment might have triggered partial melting of the lithospheric mantle and its subsequent interaction with the granitic magma, further suggesting that the ridge subduction played an important role in the crustal growth of West Junggar.

Cr-isotope fractionation during oxidative weathering of ultramafic rocks and its impact on river waters

DEFF Research Database (Denmark)

Paulukat, Cora Stefanie; Døssing, Lasse Nørbye; Mondal, Sisir K.

We investigated Cr isotope fractionation during soil formation from Precambrian ultramafic rocks. A soil profile was logged in an active open-cast chromite mine (Sukinda Valley, India). In addition, mine and river waters, as well as seawater were collected to trace the Cr-isotope signal...... values as heavy as +1.33±0.05‰. Where the drainage water merges with the river water, a slightly positively fractionated δ53Cr value (0.03±0.019‰) reflects a mixed isotope signal. With increasing distance from the mine, river water δ53Cr again becomes increasingly positively fractionated, indicating...... into the sea. The aim of the study is to recognize Cr isotope fractionation processes within the mining-area and the impact of the mine runoff on the δ53Cr of the nearby river. The weathering profile shows a distinct upward trend to more negative δ53Cr values. While the well preserved rocks at the base closely...

Smart sensor-based geospatial architecture for dike monitoring

Science.gov (United States)

Herle, S.; Becker, R.; Blankenbach, J.

2016-04-01

Artificial hydraulic structures like dams or dikes used for water level regulations or flood prevention are continuously under the influence of the weather and variable river regimes. Thus, ongoing monitoring and simulation is crucial in order to determine the inner condition. Potentially life-threatening situations, in extreme case a failure, must be counteracted by all available means. Nowadays flood warning systems rely exclusively on water level forecast without considering the state of the structure itself. Area-covering continuous knowledge of the inner state including time dependent changes increases the capability of recognizing and locating vulnerable spots for early treatment. In case of a predicted breach, advance warning time for alerting affected citizens can be extended. Our approach is composed of smart sensors integrated in a service-oriented geospatial architecture to monitor and simulate artificial hydraulic structures continuously. The sensors observe the inner state of the construction like the soil moisture or the stress and deformation over time but also various external influences like water levels or wind speed. They are interconnected in distributed network architecture by a so-called sensor bus system based on lightweight protocols like Message Queue Telemetry Transport for Sensor Networks (MQTT-SN). These sensor data streams are transferred into an OGC Sensor Web Enablement (SWE) data structure providing high-level geo web services to end users. Bundled with 3rd party geo web services (WMS etc.) powerful processing and simulation tools can be invoked using the Web Processing Service (WPS) standard. Results will be visualized in a geoportal allowing user access to all information.

Localization of Volcanic Activity: Topographic Effects on Dike Propagation, Eruption and COnduit Formation

Energy Technology Data Exchange (ETDEWEB)

E.S. Gaffney; B. Damjanac

2006-05-12

Magma flow in a dike rising in a crack whose strike runs from a highland or a ridge to an adjacent lowland has been modeled to determine the effect of topography on the flow. It is found that there is a distinct tendency for the flow to be diverted away from the highland end of the strike toward the lowland. Separation of the geometric effect of the topography from its effect on lateral confining stresses on the crack indicates that both contribute to the effect but that the effect of stress is less important. Although this analysis explains a tendency for volcanic eruptions to occur in low lands, it does not preclude eruptions on highlands. The particular configuration modeled mimics topography around the proposed nuclear waste repository at Yucca Mountain, Nevada, so that the results may indicate some reduction in the volcanic hazard to the site.

Localization of Volcanic Activity: Topographic Effects on Dike Propagation, Eruption and Conduit Formation

International Nuclear Information System (INIS)

E.S. Gaffney; B. Damjanac

2006-01-01

Magma flow in a dike rising in a crack whose strike runs from a highland or a ridge to an adjacent lowland has been modeled to determine the effect of topography on the flow. It is found that there is a distinct tendency for the flow to be diverted away from the highland end of the strike toward the lowland. Separation of the geometric effect of the topography from its effect on lateral confining stresses on the crack indicates that both contribute to the effect but that the effect of stress is less important. Although this analysis explains a tendency for volcanic eruptions to occur in low lands, it does not preclude eruptions on highlands. The particular configuration modeled mimics topography around the proposed nuclear waste repository at Yucca Mountain, Nevada, so that the results may indicate some reduction in the volcanic hazard to the site

MATLAB-based algorithm to estimate depths of isolated thin dike-like sources using higher-order horizontal derivatives of magnetic anomalies.

Science.gov (United States)

Ekinci, Yunus Levent

2016-01-01

This paper presents an easy-to-use open source computer algorithm (code) for estimating the depths of isolated single thin dike-like source bodies by using numerical second-, third-, and fourth-order horizontal derivatives computed from observed magnetic anomalies. The approach does not require a priori information and uses some filters of successive graticule spacings. The computed higher-order horizontal derivative datasets are used to solve nonlinear equations for depth determination. The solutions are independent from the magnetization and ambient field directions. The practical usability of the developed code, designed in MATLAB R2012b (MathWorks Inc.), was successfully examined using some synthetic simulations with and without noise. The algorithm was then used to estimate the depths of some ore bodies buried in different regions (USA, Sweden, and Canada). Real data tests clearly indicated that the obtained depths are in good agreement with those of previous studies and drilling information. Additionally, a state-of-the-art inversion scheme based on particle swarm optimization produced comparable results to those of the higher-order horizontal derivative analyses in both synthetic and real anomaly cases. Accordingly, the proposed code is verified to be useful in interpreting isolated single thin dike-like magnetized bodies and may be an alternative processing technique. The open source code can be easily modified and adapted to suit the benefits of other researchers.

Unraveling the Alteration History of Serpentinites and Associated Ultramafic Rocks from the Kampos HPLT Subduction Complex, Syros, Greece

Science.gov (United States)

Cooperdock, E. H. G.; Stockli, D. F.

2016-12-01

Serpentinization, hydration of peridotite, has a profound effect on fundamental tectonic and petrologic processes such as deformation of the lithosphere, bulk rheology, fluid-mobile element cycling and deep earth carbon cycling. Though numerous studies have investigated the petrology, structure and geochemistry of serpentinites, the absolute chronology of serpentinization remains elusive due to a lack of accessory minerals that can be dated using established geochronological techniques. Magnetite forms as a common secondary mineral in serpentinites from the fluid-induced breakdown reaction of primary peridotite minerals. Magnetite (U-Th)/He chronometry provides the potential to directly date the cooling of exhumed ultramafic bodies and the low-temperature fluid alteration of serpentinites. We present the first application of magnetite (U-Th)/He chronometry to date stages of alteration in ultramafic rocks from the Kampos mélange belt, a high-pressure low-temperature (HP-LT) subduction complex that experienced exhumation in the Miocene on the island of Syros, Greece. Two generations of magnetite are distinguishable by grain size, magnetite trace element geochemistry and (U-Th)/He age. Large magnetite grains (mm) from a chlorite schist and a serpentinite schist have distinct geochemical signatures indicative of formation during blackwall-related fluid alteration and record Mid-Miocene exhumation-related cooling ages, similar to zircon (U-Th)/He ages from northern Syros. Smaller grains (µm) from the serpentinite schist lack blackwall-related fluid signatures and record post-exhumation mineral formation associated with widespread high-angle Pliocene normal faulting. These results reveal evidence for multiple episodes of fluid-rock alteration, which has implications for the cooling history and local geochemical exchanges of this HP-LT terrane. Given the fundamental impact of serpentinizaton on a vast array of tectonic, petrological, and geochemical processes, the

Rapakivi texture in porphyritic dikes within the Karavanke Granitic Massif (Slovenia

Directory of Open Access Journals (Sweden)

Giuliano Bellieni

2002-01-01

Full Text Available The northern Karavanke Granitic Massif straddles the Slovenian–Austrian border. The investigated area lies in northern Slovenia, and extends from the western Slovenian–Austrian border to the east for about 30 km, with a maximum width of 2 km. The massif exhibits a bimodal magmatic association comprising mainly syenogranite and syenite with contemporaneous gabbroic rocks. Rocks of intermediate composition are less abundant and show field, textural and chemical features suggesting that they have formed as a result of the interaction (mixing and mingling between felsic and mafic magmas. Plagioclasemantled alkali feldspars occur in dikes of porphyritic syenite, which cut larger bodies of gabbroic rocks. Field, mineralogical, petrographic and geochemical evidences suggest that the porphyritic syenite is a hybrid rock, formed by the interaction of mafic and felsic magmas. The formation of plagioclase-mantled alkali feldspar can be explained by the introduction of alkali feldspar from felsic, syenogranitic magma into more mafic magma, causing local undercooling in the portion of mafic magma surrounding the crystals. This resulted in the growth of cellular plagioclase, with quartz infilling, in a thermally and compositionally equilibrating system.

Occurrence and mineral chemistry of chromite and related silicates from the Hongshishan mafic-ultramafic complex, NW China with petrogenetic implications

Science.gov (United States)

Ruan, Banxiao; Yu, Yingmin; Lv, Xinbiao; Feng, Jing; Wei, Wei; Wu, Chunming; Wang, Heng

2017-10-01

The Hongshishan mafic-ultramafic complex is located in the western Beishan Terrane, NW China, and hosts an economic Ni-Cu deposit. Chromite as accessory mineral from the complex is divided into three types based on its occurrence and morphology. Quantitative electron probe microanalysis (EPMA) have been conducted on the different types of chromites. Type 1 chromite occurs as inclusions within silicate minerals and has relatively homogeneous composition. Type 2 chromite occurs among serpentine, as interstitial phase. Type 3 chromite is zoned and exhibits a sudden change in compositions from core to rim. Type 1 chromite occurs in olivine gabbro and troctolite showing homogeneous composition. This chromite is more likely primary. Interstitial type 2 and zoned type 3 chromite has compositional variation from core to rim and is more likely modified. Abundant inclusions of orthopyroxene, phlogopite and hornblende occur within type 2 and type 3 chromites. The parental melt of type 1 chromite has an estimated composition of 14.5 wt% MgO, 12.3 wt% Al2O3 and 1.9 wt% TiO2 and is characterized by high temperature, picritic affinity, hydrous nature and high Mg and Ti contents. Compositions of chromite and clinopyroxene are distinct from those of Alaskan-type complexes and imply that the subduction-related environment is not reasonable. Post orogenic extension and the early Permian mantle plume are responsible for the emplacement of mafic-ultramafic complexes in the Beishan Terrane. The cores of zoned chromites are classified as ferrous chromite and the rims as ferrian chromite. The formation of ferrian rim involves reaction of ferrous chromite, forsterite and magnetite to produce ferrian chromite and chlorite, or alternaively, the rim can be simply envisioned as the result of external addition of magnetite in solution to the already formed ferrous chromite.

Basic and ultrabasic coastal dykes adjacent to the Sao Sebastiao Channel (North coast of Sao Paulo State, Brazil)

International Nuclear Information System (INIS)

Garda, Gianna Maria; Schorscher, Johann Hans Daniel

1996-01-01

The portions of the Precambrian Costeiro Complex adjacent to the Sao Sebastiao Channel (Sao Paulo State, Brazil) are crosscut by mafic dykes of basic to intermediate composition, lamprophyres and trachytes. The former have been correlated with the basalts of the Parana Basin, while the lamprophyres are expressions of an alkaline magmatism different from the one that happened approximately 80 Ma ago in the Sao Sebastiao, Buzios, Vitoria and Montao de Trigo islands, where more acid terms predominate with associated trachytes and rare phonolites. The basic-ultrabasic lamprophyric magmatism is widespread along the Sao Paulo and Rio de Janeiro coasts; they are independent from and most likely older than the stocks and alkaline massifs. (author)

A Late Mesozoic short-lived shift from fluid-dominated to sediment-dominated mantle metasomatism in the northeast South China Block and its tectonic implications

Science.gov (United States)

Pan, Fa-Bin; Jin, Chong; Jia, Bao-Jian; Liu, Rong; He, Xiaobo; Gao, Zhong; Tao, Lu; Zhou, Xiao-Chun; Zhang, Li-Qi

2018-06-01

Early Cretaceous northwest (NW)-trending dolerite and amphibole lamprophyre dykes exposed in NW Zhejiang Province provide a number of new insights into the nature of the subcontinental mantle on the northeast (NE) South China Block (SCB). These dykes have a high Al2O3 (14.04-17.89 wt%) and K2O (0.66-2.69 wt%) contents but relatively low Na2O (2.48-4.61 wt%) and TiO2 (1.33-2.79 wt%) makeup alongside moderate K2O/Na2O ratios between 0.26 and 1.04. These amphibole lamprophyre dykes also have higher MgO, Cr, and Ni contents than those of comparable dolerites that have SiO2 content ranging from 46.32 to 49.87 wt%. The most striking feature of these intrusions is that they contain higher contents of Rb, Th, U, Nb, Ta, and LREE compared to their dolerite counterparts, although both amphibole lamprophyres and dolerites do exhibit similar geochemical patterns that are indicative of subduction-related origins. These features imply that an ambient peridotitic mantle that acted as the source for the amphibole lamprophyre magma source may have reacted with silicate-rich melts leading to olivine consumption while maintaining orthopyroxene. The geochemical composition of these dolerites are likely influenced to a variable extent by the fractionation of olivine, orthopyroxene, clinopyroxene, Fe-Ti oxides, and apatite, while their amphibole lamprophyre counterparts have been modified to a minor degree by amphibole fractionation. Measured Sr-Nd isotopic compositions suggest relatively constant Nd isotopic compositions (-0.36 to +1.52) with more variable Sr isotopic compositions (0.7071 to 0.7306). We hence propose that both the dolerite and amphibole lamprophyre dykes in this region are the products of mantle source metasomatism by the subducted Paleo-Pacific slab. The dolerite dykes are mainly associated with slab-derived fluids, while the lamprophyre dykes are related to both slab-derived fluids and sediment melts. Evidence in support of metasomatism comprising distinct two

Chromian spinels in highly altered ultramafic rocks from the Sartohay ophiolitic mélange, Xinjiang, NW China

Science.gov (United States)

Qiu, Tian; Zhu, Yongfeng

2018-06-01

The Sartohay ophiolitic mélange is located in western Junggar (Xinjiang province, NW China), which is a major component of the core part of the Central Asian Orogenic Belt (CAOB). Chromian spinels in serpentinite, talc schist, carbonate-talc schist and listwaenite in Sartohay ophiolitic mélange retain primary compositions with Cr# of 0.39-0.65, Mg# = 0.48-0.67, and Fe3+# evolution of chromian spinels in highly altered ultramafic rocks from the Sartohay ophiolitic mélange. Chromian spinels in serpentinite and talc schist were rimmed by Cr-magnetite, which was dissolved completely during transformation from serpentinite/talc schist to listwaenite. Chromian spinels were then transformed into Fe2+-rich chromite in shear zones, which characterized by high fluid/rock ratios. This Fe2+-rich chromite and/or chromian spinels could then be transformed into Fe3+-rich chromite in oxidizing conditions at shallow levels.

Late Precambrian Balkan-Carpathian ophiolite — a slice of the Pan-African ocean crust?: geochemical and tectonic insights from the Tcherni Vrah and Deli Jovan massifs, Bulgaria and Serbia

Science.gov (United States)

Savov, Ivan; Ryan, Jeff; Haydoutov, Ivan; Schijf, Johan

2001-10-01

The Balkan-Carpathian ophiolite (BCO), which outcrops in Bulgaria, Serbia and Romania, is a Late Precambrian (563 Ma) mafic/ultramafic complex unique in that it has not been strongly deformed or metamorphosed, as have most other basement sequences in Alpine Europe. Samples collected for study from the Tcherni Vrah and Deli Jovan segments of BCO include cumulate dunites, troctolites, wehrlites and plagioclase wehrlites; olivine and amphibole-bearing gabbros; anorthosites; diabases and microgabbros; and basalts representing massive flows, dikes, and pillow lavas, as well as hyaloclastites and umbers (preserved sedimentary cover). Relict Ol, Cpx and Hbl in cumulate peridotites indicate original orthocumulate textures. Plagioclase in troctolites and anorthosites range from An60 to An70. Cumulate gabbro textures range from ophitic to poikilitic, with an inferred crystallization order of Ol-(Plag+Cpx)-Hbl. The extrusive rocks exhibit poikilitic, ophitic and intersertal textures, with Cpx and/or Plag (Oligoclase-Andesine) phenocrysts. The major opaques are Ti-Magnetite and Ilmenite. The metamorphic paragenesis in the mafic samples is Chl-Trem-Ep, whereas the ultramafic rocks show variable degrees of serpentinization, with lizardite and antigorite as dominant phases. Our samples are compositionally and geochemically similar to modern oceanic crust. Major element, trace element and rare earth element (REE) signatures in BCO basalts are comparable to those of MORB. In terms of basalt and dike composition, the BCO is a 'high-Ti' or 'oceanic' ophiolite, based on the classification scheme of Serri [Earth Planet. Sci. Lett. 52 (1981) 203]. Our petrologic and geochemical results, combined with the tectonic position of the BCO massifs (overlain by and in contact with Late Cambrian island arc and back-arc sequences), suggest that the BCO may have formed in a mid-ocean ridge setting. If the BCO records the existence of a Precambrian ocean basin, then there may be a relationship

Catchment-wide weathering and erosion rates of mafic, ultramafic, and granitic rock from cosmogenic meteoric 10Be/9Be ratios

Science.gov (United States)

Dannhaus, N.; Wittmann, H.; Krám, P.; Christl, M.; von Blanckenburg, F.

2018-02-01

Quantifying rates of weathering and erosion of mafic rocks is essential for estimating changes to the oceans alkalinity budget that plays a significant role in regulating atmospheric CO2 levels. In this study, we present catchment-wide rates of weathering, erosion, and denudation measured with cosmogenic nuclides in mafic and ultramafic rock. We use the ratio of the meteoric cosmogenic nuclide 10Be, deposited from the atmosphere onto the weathering zone, to stable 9Be, a trace metal released by silicate weathering. We tested this approach in stream sediment and water from three upland forested catchments in the north-west Czech Republic. The catchments are underlain by felsic (granite), mafic (amphibolite) and ultramafic (serpentinite) lithologies. Due to acid rain deposition in the 20th century, the waters in the granite catchment exhibit acidic pH, whereas waters in the mafic catchments exhibit neutral to alkaline pH values due to their acid buffering capability. The atmospheric depositional 10Be flux is estimated to be balanced with the streams' dissolved and particulate meteoric 10Be export flux to within a factor of two. We suggest a correlation method to derive bedrock Be concentrations, required as an input parameter, which are highly heterogeneous in these small catchments. Derived Earth surface metrics comprise (1) Denudation rates calculated from the 10Be/9Be ratio of the "reactive" Be (meaning sorbed to mineral surfaces) range between 110 and 185 t km-2 y-1 (40 and 70 mm ky-1). These rates are similar to denudation rates we obtained from in situ-cosmogenic 10Be in quartz minerals present in the bedrock or in quartz veins in the felsic and the mafic catchment. (2) The degree of weathering, calculated from the fraction of 9Be released from primary minerals as a new proxy, is about 40-50% in the mafic catchments, and 10% in the granitic catchment. Lastly, (3) erosion rates were calculated from 10Be concentrations in river sediment and corrected for sorting

Important aspects of residue sampling in drilling dikes; Aspectos importantes para a amostragem de residuos em diques de perfuracao

Energy Technology Data Exchange (ETDEWEB)

Silva, Gilvan Ferreira da [PETROBRAS, Rio de Janeiro (Brazil). Centro de Pesquisas. Div. de Explotacao

1990-12-31

This paper describes the importance of sampling in the evaluation of physical and chemical properties of residues found in drilling dikes, considering the later selection of treatment methods or discard of these residues. We present the fundamental concepts of applied statistics, which are essential to the elaboration of sampling plans, with views of obtaining exact and precise results. Other types of samples are also presented, as well as sampling equipment and methods for storage and preservation of the samples. As a conclusion, we the example of the implementation of a sampling plan. (author) 3 refs., 9 figs., 3 tabs.

Important aspects of residue sampling in drilling dikes; Aspectos importantes para a amostragem de residuos em diques de perfuracao

Energy Technology Data Exchange (ETDEWEB)

Silva, Gilvan Ferreira da [PETROBRAS, Rio de Janeiro (Brazil). Centro de Pesquisas. Div. de Explotacao

1989-12-31

This paper describes the importance of sampling in the evaluation of physical and chemical properties of residues found in drilling dikes, considering the later selection of treatment methods or discard of these residues. We present the fundamental concepts of applied statistics, which are essential to the elaboration of sampling plans, with views of obtaining exact and precise results. Other types of samples are also presented, as well as sampling equipment and methods for storage and preservation of the samples. As a conclusion, we the example of the implementation of a sampling plan. (author) 3 refs., 9 figs., 3 tabs.

The global distribution of giant radiating dike swarms on Venus: Implications for the global stress state

Science.gov (United States)

Grosfils, Eric B.; Head, James W.

1994-01-01

Magellan radar data of Venus reveal 163 large radial lineament systems composed of graben, fissure, and fracture elements. On the basis of their structure, plan view geometry, and volcanic associations, at least 72% are interpreted to have formed primarily through subsurface dike swarm emplacement, the remainder through uplift or a combination of these two mechanisms. The population of swarms is used to determine regional and global stress orientation. The stress configuration recorded from 330-210 deg E (Aphrodite Terra) is best explained by isostatic compensation of existing long wavelength topography or coupling between mantle flow and the lithosphere. The rest are correlated with concentrations of rifting and volcanism in the Beta-Atla-Themis region. The global stress field on Venus is different than that of Earth, where plate boundary forces dominate.

Geologic feasibility of talc and serpentinite bodies from the Appalachian Mountain region of eastern United States with regard to siting of radioactive-waste repositories. Part I. Additional conclusions relating to ultramafic rocks. Part II. Field investigations of talc and serpentinite deposits. Supplementary report

International Nuclear Information System (INIS)

Wenner, D.B.

1976-01-01

Ultramafic rocks and serpentinites appear to have many favorable features that make them worthy of further consideration. Such rock types are widely distributed in this country and display wide variations in their physical properties, based largely on the degree of serpentinization and mineral content. For example, serpentinite has certain self-sealing and flowage characteristics that render it impermeable at depth, whereas unserpentinized ultramafic rocks are structurally very rigid and strong. Another favorable property of ultramafic rocks is the relatively low thermal expansion coefficient. Talc also has some favorable features and characteristics such as a high thermal stability and a low porosity and permeability. This present study has verified that very little ground water influx occurs in talcose rocks except in large fault zones. A major drawback for the usage of talc for containment of radioactive wastes is due to the relatively small sizes of most bodies. However, some of the large talc-carbonate units in the Missisquoi Valley Region of Vermont has potential. Consideration should also be given to other crystalline rocks as well, particularly schists, since they commonly contain micaceous materials which have similar properties to talc and serpentine. In considering various types of rocks for containment of radioactive wastes, the important properties are thermal conductivities, thermal expansion coefficients, thermal stabilities, and how high radiation fluxes affect these properties

Multistage crack seal vein and hydrothermal Ni enrichment in serpentinized ultramafic rocks (Koniambo massif, New Caledonia)

Science.gov (United States)

Cathelineau, Michel; Myagkiy, Andrey; Quesnel, Benoit; Boiron, Marie-Christine; Gautier, Pierre; Boulvais, Philippe; Ulrich, Marc; Truche, Laurent; Golfier, Fabrice; Drouillet, Maxime

2017-10-01

Sets of fractures and breccia sealed by Ni-rich silicates and quartz occur within saprock of the New Caledonian regolith developed over ultramafic rocks. The crystallization sequence in fractures is as follows: (1) serpentine stage: lizardite > polygonal serpentine > white lizardite; (2) Ni stage: Ni-Mg kerolite followed by red-brown microcrystalline quartz; and (3) supergene stages. The red-brown microcrystalline quartz corresponds to the very last stage of the Ni sequence and is inferred to have precipitated within the 50-95 °C temperature range. It constitutes also the main cement of breccia that has all the typical features of hydraulic fracturing. The whole sequence is therefore interpreted as the result of hydrothermal fluid circulation under medium to low temperature and fluctuating fluid pressure. Although frequently described as the result of a single downward redistribution of Ni and Mg leached in the upper part of the regolith under ambient temperature, the Ni silicate veins thus appear as the result of recurrent crack and seal process, corresponding to upward medium temperature fluid convection, hydraulic fracturing and subsequent fluid mixing, and mineral deposition.

Further Sr and Nd isotopic results from peridotites of the Ronda Ultramafic Complex

International Nuclear Information System (INIS)

Reisberg, L.; Zindler, A.

1989-01-01

Clinopyroxenes derived from peridotites of the spinel and garnet facies of the Ronda Ultramafic Complex yield Sr and Nd isotopic ratios which extend the range of compositions found in the massif to values as depleted as 0.70205 for Sr and 0.51363 for Nd. Large-amplitude, short-wavelength isotopic variations are found to be uniquitous throughout the massif. In the garnet facies, some of these variations are shown to be produced by the tectonic disaggregation of mafic layers in an isotopically depleted peridotite matrix. Ages obtained from garnet-clinopyroxene Sm-Nd isochrons (about 22 m.y.) agree with previous determinations of the time of crustal emplacement. In the plagioclase facies, where the Sr and Nd isotopic compositions have been very strongly affected by recent cryptic metasomatism, detailed study of one sample reveals that intermineral Nd isotopic equilibrium exists between clinopyroxene, orthopyroxene, and plagioclase. This indicates that the metasomatism occurred at high temperatures, and thus probably within the mantle. A rough correlation between 143 Nd/ 144 Nd and 147 Sm/ 144 N, with an apparent 'age' of 1.3 b.y. and an initial ε Nd (0) value of +6.0, is observed among clinopyroxenes derived from river sediments from throughout the massif. This age is interpreted as the time that the massif left the convecting mantle and became incorporated into the sub-continental lithosphere. (orig.)

Physical properties of the Miyamori ultramafic complex in the Kitakami Mountains, northeast Japan; Miyamori choku tetsushitsu gantai no butsuriteki seishitsu

Energy Technology Data Exchange (ETDEWEB)

Kanaya, H.; Katada, M.; Nagahara, M.

1998-03-05

Physical properties of 61 rock sample collected from 22 outcrops of the Miyamori ultramafic complex in the Kitakami Mountains are reported in this paper. Their density, P-wave velocity, magnetic susceptibility, Curie temperature, and natural remanent magnetization were newly measured and discussed based on the petrographic data. The western part of the Miyamori ultramafic complex was intruded by an early Cretaceous granite, which thermally affected one-third of this complex. The characteristics of data are summarized as follows. Rock density varies from 2.56 to 3.15 g/cm{sup 3} with an average of 2.76 g/cm{sup 3} (gabroic rocks are excluded). P-wave velocity varies from 4.26 to 6.76 km/s with an average of 5.83 km/s. Magnetic susceptibility varies from 1.2 to 14.4 times 10{sup -3} (cgsemu) and the Konigsberger ratio varies widely from 0.3 to 4.9, with ratio less than 1.1 for most of the strongly metamorphosd rocks. Curie temperature is approximately 578degC in 65 percent of the rock samples, indicating the presence of magnetite, whereas many strongly metamorphosed rocks have two Curie temperatures for hematite, magnetite and titanomagnetite. One sample have three Curie temperatures for hematite, magnetite and titanomagnetite. The declination of natural remanent magnetization of the rocks are mostly plotted in the northwest and all the inclinations plot downward. The average of inclination and declination are 50degN and 35degW, respectively. In preliminary palaeomagnetic observations by AC demagnetizations, the mean direction of 18 outcrops show the results similar to that of natural remanent magnetization (51degN,39degW). Significant difference was not recognized between the strongly metamorphosed and the less metamorphosed rocks. It is evident that the decreasing tendency of rock density and P-wave velocity with increasing magnetic susceptibility was caused by serpentinization. But it is not clear when serpentinization occur

Transient deformation in the Asal-Ghoubbet Rift (Djibouti) since the 1978 diking event: Is deformation controlled by magma supply rates?

Science.gov (United States)

Smittarello, D.; Grandin, R.; de Chabalier, J. B.; Doubre, C.; Deprez, A.; Masson, F.; Socquet, A.; Ibrahim Ahmed, S.

2016-12-01

Within the Afar Depression, the Asal-Ghoubbet Rift (AG Rift)in Djibouti lies in the subaerial continuation of the Aden ridge system. This segment constitutes a natural laboratory to study rifting processes and mechanisms involved in continental breakup and oceanic spreading. In November 1978, an exceptional rifting event occurred in the AG Rift. Regularly upgraded and improved geodetic technology has been used to monitor this event and the postdiking deformation. In light of recent results obtained for the Manda Hararo-Dabbahu rifting event (2005-2010), we propose that the horizontal and vertical geodetic data can be modeled with a double source, involving a dike-like inflation component aligned along the rift axis and a spherical pressure source located at midsegment below the Fieale caldera. By revisiting the codiking data, we propose that the reservoir below Fieale could have fed, at least partially, the 1978 injection and the contemporaneous Ardoukoba eruption and potentially induced local subsidence due to magma draining out of the central reservoir. As an alternative to previously proposed viscoelastic relaxation models, we reinterpret postdiking observations using a purely elastic rheology. We determine the relative contribution of a midsegment reservoir inflation and a dike-like opening component, together with their respective time evolutions. Our results suggest that interactions between steadily accumulating tectonic strain and temporal variations in melt supply to the shallow magma plumbing system below the AG Rift may entirely explain the geodetic observations and that viscoelastic deformation processes played a minor role in the 30 years following the 1978 rifting event.

The abundance and distribution of uranium in some oceanic, continental ultramafic inclusions and host basalts

International Nuclear Information System (INIS)

Hamilton, E.I.

1975-01-01

The abundance and distribution of uranium in various continental and oceanic ultramafic inclusions and host basalts are reported. Uranium was determined by neutron activation (fission products, fission tracks and delayed-neutron methods) and alpha-particle autoradiography; data is also reported for the uranium content of various USGS standard rock powders. The concentration of uranium in both oceanic and continental samples is similar, levels are controlled by mineral compositions and their relative abundance in different rock types. Highest levels are found in feldspathic and lowest in olivine-rich inclusions. Uranium is enriched in mylonitised samples and along some inter-crystal boundaries. With the exception of some apatites, highest levels of uranium are in clinopyroxenes (chrome) and lowest in olivines; no enrichment of uranium in orthopyroxenes was observed. Attention is drawn to the problem of obtaining representative samples from the sea floor which have not been altered by saline solutions and the identification of uranium and daughter products present along inter-crystal boundaries. Differences in observed heat flow between continental and oceanic areas may reflect inadequate sampling of representative rock types present below the sea floor and lack of information for the true abundance and distribution of uranium in such rocks

Serpentinization and fluid-rock interaction in Jurassic mafic and ultramafic sea-floor: constraints from Ligurian ophiolite sequences

Science.gov (United States)

Vogel, Monica; Früh-Green, Gretchen L.; Boschi, Chiara; Schwarzenbach, Esther M.

2014-05-01

The Bracco-Levanto ophiolitic complex (Eastern Liguria) represents one of the largest and better-exposed ophiolitic successions in the Northern Apennines. It is considered to be a fragment of heterogeneous Jurassic lithosphere that records tectono-magmatic and alteration histories similar to those documented along the Mid-Atlantic Ridge, such as at the 15°20'N area and the Atlantis Massif at 30°N. Structural and petrological studies on these rocks provide constraints on metamorphic/deformation processes during formation and hydrothermal alteration of the Jurassic oceanic lithosphere. We present a petrological and geochemical study of deformation processes and fluid-rock interaction in the Bracco-Levanto ophiolitic complex and compare these to modern oceanic hydrothermal systems, such as the Lost City Hydrothermal Field hosted in ultramafic rocks on the Atlantis Massif. A focus is on investigating mass transfer and fluid flow paths during high and low temperature hydrothermal activity, and on processes leading to hydrothermal carbonate precipitation and the formation of ophicalcites, which are characteristic of the Bracco-Levanto sequences. Major element and mineral compositional data allow us to distinguish a multiphase history of alteration characterized by: (1) widespread SiO2 metasomatism during progressive serpentinization, and (2) multiple phases of veining and carbonate precipitation associated with circulation of seawater and high fluid-rock ratios in the shallow ultramafic-dominated portions of the Jurassic seafloor. We observe regional variations in MgO, SiO2 and Al2O3, suggesting Si-flux towards stratigraphically higher units. In general, the ophicalcites have higher Si, Al and Fe concentrations and lower Mg than the serpentinite basement rocks or serpentinites with minimal carbonate veins. Bulk rock trace element data and Sr isotope ratios indicate seawater reacting with rocks of more mafic composition, then channeled towards stratigraphically higher

The Wenquan ultramafic rocks in the Central East Kunlun Fault zone, Qinghai-Tibet Plateau—crustal relics of the Paleo-Tethys ocean

Science.gov (United States)

Jia, Lihui; Meng, Fancong; Feng, Huibin

2018-06-01

The Wenquan ultramafic rocks, located in the East Kunlun Orogenic belt in the northeastern part of the Qinghai-Tibet Plateau, consist of dunite, wehrlite, olivine-clinopyroxenite and clinopyroxenite, and exhibit cumulate textures. Olivine from dunite has high Fo (forsterite, 90.0-91.8 wt%) and NiO content (0.15-0.42 wt%). Cr-spinels from all of the rocks in this suite are characterized by high Cr# (100×[Cr/(Cr + Al)], 67-91), low Mg# (100×[Mg/(Mg + Fe2+)], 17-35) and low TiO2 contents (mostly rocks show enrichment of LILE, Sr, and Ba, and depletion of Nb and Th. High-Mg# (mostly > 80) and low-CaO (evolution along the Central East Kunlun Fault zone.

Field characteristics, petrography, and geochronology of the Hohonu Batholith and the adjacent Granite Hill Complex, North Westland, New Zealand

International Nuclear Information System (INIS)

Waight, T.E.; Weaver, S.D.; Ireland, T.R.; Maas, R.; Muir, R.J.; Shelley, D.

1997-01-01

Detailed geological mapping, petrography, geochemistry and geochronological studies in the Hohonu Batholith, North Westland, have identified 10 granitoid plutons emplaced during three intrusive episodes. The earliest episode is represented by a single dated Paleozoic pluton, Summit Granite (new) (381.2 ± 7.3 Ma), which is correlated with a discrete pulse of Mid-Late Devonian plutonism recognised in the Karamea Batholith. The undated Mount Graham Granite (new) is also likely to be Paleozoic, based on chemical and petrographic characteristics. The bulk of the batholith (seven plutons) was emplaced in the mid Cretaceous (114-109 Ma) and comprises two related, yet distinct, geochemical suites, which correlate with the previously defined Rahu Suite. The plutons identified are (from north to south): Pah Point Granite; Jays Creek Granodiorite (new); Uncle Bay Tonalite; Te Kinga Monzogranite; Deutgam Granodiorite; Turiwhate Granodiorite (new); and Arahura Granite (new). Mid-Cretaceous plutonism in the Western Province is considered to be the result of crustal thinning and extension following overthickening during collision of the Early Cretaceous Median Tectonic Zone volcanic arc. Late Cretaceous alkaline activity is represented by the emplacement of the A-type French Creek Granite at 1.7 ± 1.8 Ma, contemporaneous with intrusion of a major swarm of doleritic-lamprophyric dikes - the Hohonu Dike Swarm. These events correlate with the first appearance of oceanic crust in the Tasman Sea. The Granite Hill Complex is a suite of amphibolite facies gneisses occurring as an uplifted wedge between the Alpine Fault nd the Hohonu Batholith. These gneisses are considered to represent an extension of the Fraser Complex to the south. A detailed understanding of their geological affinities and history is yet to be established. (author). 66 refs., 7 figs., 3 tabs

Mid Ocean Ridge Processes at Very Low Melt Supply : Submersible Exploration of Smooth Ultramafic Seafloor at the Southwest Indian Ridge, 64 degree E

Science.gov (United States)

Cannat, M.; Agrinier, P.; Bickert, M.; Brunelli, D.; Hamelin, C.; Lecoeuvre, A.; Lie Onstad, S.; Maia, M.; Prampolini, M.; Rouméjon, S.; Vitale Brovarone, A.; Besançon, S.; Assaoui, E. M.

2017-12-01

Mid-ocean ridges are the Earth's most extensive and active volcanic chains. They are also, particularly at slow spreading rates, rift zones, where plate divergence is in part accommodated by faults. Large offset normal faults, also called detachments, are characteristic of slow-spreading ridges, where they account for the widespread emplacement of mantle-derived rocks at the seafloor. In most cases, these detachments occur together with ridge magmatism, with melt injection and faulting interacting to shape the newly formed oceanic lithosphere. Here, we seek to better understand these interactions and their effects on oceanic accretion by studying the end-member case of a ridge where magmatism is locally almost absent. The portion of the Southwest Indian ridge we are studying has an overal low melt supply, focused to discrete axial volcanoes, leaving almost zero melt to intervening sections of the axial valley. One of these nearly amagmatic section of the ridge, located at 64°E, has been the focus of several past cruises (sampling, mapping and seismic experiments). Here we report on the most recent cruise to the area (RV Pourquoi Pas? with ROV Victor; dec-jan 2017), during which we performed high resolution mapping, submersible exploration and sampling of the ultramafic seafloor and of sparse volcanic formations. Our findings are consistent with the flip-flop detachment hypothesis proposed for this area by Sauter et al. (Nature Geosciences, 2013; ultramafic seafloor forming in the footwall of successive detachment faults, each cutting into the footwall of the previous fault, with an opposite polarity). Our observations also document the extent and geometry of deformation in the footwall of a young axial detachment, the role of mass-wasting for the evolution of this detachment, and provide spectacular evidence for serpentinization-related hydrothermal circulation and for spatial links between faults and volcanic eruptions.

Burkholderia novacaledonica sp. nov. and B. ultramafica sp. nov. isolated from roots of Costularia spp. pioneer plants of ultramafic soils in New Caledonia.

Science.gov (United States)

Guentas, Linda; Gensous, Simon; Cavaloc, Yvon; Ducousso, Marc; Amir, Hamid; De Georges de Ledenon, Benjamin; Moulin, Lionel; Jourand, Philippe

2016-05-01

The taxonomic status of eleven rhizospheric bacterial strains belonging to the genus Burkholderia and isolated from roots of Costularia (Cyperaceae), tropical herbaceous pioneer plants growing on ultramafic soils in New Caledonia, was investigated using a polyphasic taxonomic approach. The genetic analyses (16S rRNA genes, gyrB, recA, nreB and cnr) confirmed that all strains are Burkholderia and cluster into two separated groups. The DNA hybridization results showed low relatedness values to the closest relatives Burkholderia species. The phenotypic analyses confirmed that the two groups of strains could be differentiated from each other and from other known Burkholderia species. This polyphasic study revealed that these two groups of strains represent each a novel species of Burkholderia, for which the names Burkholderia novacaledonica sp. nov. (type strain STM10272(T)=LMG28615(T)=CIP110887(T)) and B. ultramafica sp. nov. (type strain STM10279(T)=LMG28614(T)=CIP110886(T)) are proposed, respectively. These strains of Burkholderia presented specific ecological traits such as the tolerance to the extreme edaphic constraints of ultramafic soils: they grew at pH between 4 and 8 and tolerate the strong unbalanced Ca/Mg ratio (1/19) and the high concentrations of heavy metals i.e. Co, Cr, Mn and Ni. Noteworthy B. ultramafica tolerated nickel until 10mM and B. novacaledonica up to 5mM. The presence of the nickel (nreB) and cobalt/nickel (cnr) resistance determinants encoding for protein involved in metal tolerance was found in all strains of both groups. Moreover, most of the strains were able to produce plant growth promoting molecules (ACC, IAA, NH3 and siderophores). Such ecological traits suggest that these new species of Burkholderia might be environmentally adaptable plant-associated bacteria and beneficial to plants. Copyright © 2016 Elsevier GmbH. All rights reserved.

Climate Change Impact Assessment of Dike Safety and Flood Risk in the Vidaa River System

DEFF Research Database (Denmark)

Madsen, H.; Sunyer Pinya, Maria Antonia; Larsen, J.

2013-01-01

The impact of climate change on the flood risk and dike safety in the Vidaa River system, a cross-border catchment located in the southern part of Jutland, Denmark and northern Germany, is analysed. The river discharges to the Wadden Sea through a tidal sluice, and extreme water level conditions...... in the river system occur in periods of high sea water levels where the sluice is closed and increased catchment run-off take place. Climate model data from the ENSEMBLES data archive are used to assess the changes in climate variables and the resulting effect on catchment run-off. Extreme catchment run......-off is expected to increase about 8 % in 2050 and 14 % in 2100. The changes in sea water level is assessed considering climate projections of mean sea level rise, isostatic changes, and changes in storm surge statistics. At the Vidaa sluice a mean sea level rise of 0.15–0.39 m in 2050 and 0.41–1.11 m in 2010...

Metasomatic Reaction Zones as Monitors of Trace Element Transfer at the Slab-Mantle Interface: the Case of the Hochwart Peridotite (Ulten Zone, Italy)

Science.gov (United States)

Marocchi, M.; Hermann, J.; Bargossi, G. M.; Mair, V.; Morten, L.

2006-12-01

Ultramafic blocks belonging to the Hochwart peridotite outcrop (Ulten Zone, Italian Alps) preserve a series of metasomatic mineral zones generated by infiltration of Si-rich hydrous fluids which occurred at the gneiss- peridotite interface. The age of the high pressure metamorphism for the Hochwart complex has been constrained at 330 Ma (Tumiati et al., 2003, EPSL, 210, 509-526). The country rocks are stromatic gneisses consisting mainly of quartz, K-feldspar, garnet, kyanite, biotite and muscovite. The ultramafic body consists of strongly serpentinized metaperidotites which are exposed as a hectometre-size lens along a steep gully, associated to monomineralic zones that developed at the contact between the peridotite body and the garnet gneiss country rocks. The composition of the metasomatic zones has been investigated in detail and records an order of metasomatic zoning formed by phlogopite-rich to tremolite-anthophyllite-rich rocks going from the host gneiss towards the peridotite. In some cases, the ultramafics fade into the gneisses developing serpentine and talc which has replaced, presumably at lower temperatures, the serpentine matrix and occurs in association with chlorite. Phlogopite aggregates (phlogopitite) with accessory minerals (quartz + zircon + apatite) and metabasic pods (phlogopite and hornblende) also occur. Black tourmaline (schorl-dravite solid solution) has been found for the first time in the contact near the phlogopite zone, suggesting an external addition of elements (boron and fluorine) to the system at high temperature. The formation of the metasomatic zones composed exclusively of hydrous phases must have involved extensive H2O-metasomatism as already documented for the Ulten peridotites. The source for these fluids can be a system of trondhjemitic-pegmatitic dikes cutting the peridotite that would have channelled aqueous fluids into the ultramafic rocks. Whole-rock geochemistry and trace element (LA ICP-MS) composition of hydrous

Variable sources for Cretaceous to recent HIMU and HIMU-like intraplate magmatism in New Zealand

DEFF Research Database (Denmark)

van der Meer, Quinten; Waight, Tod Earle; Scott, James

2017-01-01

–100Ma) calc-alkaline lamprophyres are compositionally similar to the preceding arc-magmatism (206Pb/204Pb(i)=18.6, 207Pb/204Pb(i)=15.62, 208Pb/204Pb(i)=38.6, 87Sr/86Sr(i)=0.7063–0.7074, εNd(i)=−2.1 −+0.1 and εHf(i)=−0.2 −+2.3) and are interpreted as melts originating from subduction-modified lithosphere....... Alkaline dikes erupted on the inboard Gondwana margin shortly after cessation of subduction (92–84Ma) have heterogeneous isotopic properties: 206Pb/204Pb(i)=18.7 to 19.4, 207Pb/204Pb(i)=15.60 to 15.65, 208Pb/204Pb(i)=38.6 to 39.4, 87Sr/86Sr(i)=0.7031 to 0.7068, εNd(i)=+4.5 to +8.0 and εHf(i)=+5.1 to +8...... from the complex local subduction history. A coeval episode of alkaline magmatism (mainly 98–82Ma) occurred outboard of Gondwana’s former active margin and on the Hikurangi oceanic plateau (accreted to Zealandia in the Early Cretaceous) with compositions closer to true HIMU (206Pb/204Pb(i)≈20.5, 207Pb...

Carbonation of Subduction Interface Ultramafic Rocks and Implications for Deep Carbon Cycling: Evidence from Hybrid Serpentinite-Marble in the Voltri Massif, Italy

Science.gov (United States)

Scambelluri, M.; Bebout, G. E.; Gilio, M.; Belmonte, D.; Campomenosi, N.; Crispini, L.

2015-12-01

Release of COH fluids from hydrous minerals and carbonates influences element recycling and magmatism at subduction zones. Contradictory interpretations exist regarding the retention/storage of C in subducting plates and in the forearc to subarc mantle. Multiple lines of evidence indicate mobility of C in forearcs; however, the magnitude of this loss is highly uncertain[1-5]. A poorly constrained fraction of the 40-115 Mt/y of C initially subducted is released into fluids (e.g., by decarbonation, carbonate dissolution), and 18-43 Mt/y is returned at arc volcanoes[2-5, refs. therein]. The imbalance could reflect subduction into the deeper mantle or forearc/subarc storage[4-7]. We examine the fate of C in slab/interface ultramafic rocks, and by analogy serpentinized mantle wedge, via study of fluid-rock evolution of marble and variably carbonated serpentinite (Ligurian Alps). Based on petrography, and major/trace element and C and O isotope compositions, we demonstrate that serpentinite dehydration at 2-2.5 GPa, 550°C released aqueous fluids triggering breakdown of dolomite in nearby marbles, thus releasing C into fluids. Carbonate + olivine veins document flow of COH fluids; interaction of these COH fluids with serpentinite led to formation of high-pressure carbonated ultramafic-rock domains, thus resulting in retention of C in some rocks at an ancient subduction interface. We stress that lithologically complex interfaces could contain sites of both C release and C addition, further confounding estimates of net C loss at forearc and subarc depths [cf 4,5]. Sites of C retention, also including carbonate veins and graphite as reduced carbonate[7], could influence the transfer of slab C to at least the depths beneath volcanic fronts. 1. Poli S et al. 2009 EPSL; 2. Ague and Nicolescu 2014 Nat Geosci; 3. Cook-Collars et al. 2014 Chem Geol; 4. Collins et al. 2015 Chem Geol; 5. Kelemen and Manning 2015 PNAS; 6. Sapienza et al. 2009 CMP; 7 Galvez et al. 2013 Nat Geosci

Gabbroic lithologies of the dike-gabbro transition, Hole GT3A, Oman Drilling Project

Science.gov (United States)

Jesus, A. P. M.; Koepke, J.; Morishita, T.; Beinlich, A.; Johnson, K. T. M.; Greenberger, R. N.; Harris, M.; Michibayashi, K.; de Obeso, J. C.

2017-12-01

Hole GT3A intersects 400 m of oceanic crust providing unique insight into the dike-gabbro transition and the variability of the high level gabbros in the Samail ophiolite. Olivine gabbro and olivine bearing gabbro occur exclusively within the Upper Gabbro Sequence (16 % thickness; 111.02 m - 127.89 m) whereas oxide gabbro and disseminated oxide gabbro represent ca 5 % of the Lower Gabbro Sequence (233.84 m - 398.21 m). Gabbro with less than 1 vol. % olivine and oxide is the most common lithology in both Gabbro Sequences (10-13 %). Most gabbroic rocks were classified as "varitextured" due to textural and grain size macroscopic variations forming irregular domains/patches. Varitextured gabbros are medium-grained (1-5 mm), with seriate grain size distribution and subophitic/poikilitic to granular textural domains. Poikilitic domains comprise clinopyroxene with plagioclase chadacrysts, whereas in granular domains plagioclase interstices are filled by green-brown magmatic hornblende; plagioclase is zoned in both domains. Olivine (bearing) gabbros have 4-8 mm skeletal olivine pseudomorphs with roundish inclusions of chromite and plagioclase. Oxide (disseminated) gabbros comprise variable amounts of plagioclase, clinopyroxene, Oman paleo ridge.

Evolution of fracture permeability of ultramafic rocks undergoing serpentinization at hydrothermal conditions: An experimental study

Science.gov (United States)

Farough, Aida; Moore, Diane E.; Lockner, David A.; Lowell, R.P.

2016-01-01

We performed flow-through laboratory experiments on five cylindrically cored samples of ultramafic rocks, in which we generated a well-mated through-going tensile fracture, to investigate evolution of fracture permeability during serpentinization. The samples were tested in a triaxial loading machine at a confining pressure of 50 MPa, pore pressure of 20 MPa, and temperature of 260°C, simulating a depth of 2 km under hydrostatic conditions. A pore pressure difference of up to 2 MPa was imposed across the ends of the sample. Fracture permeability decreased by 1–2 orders of magnitude during the 200–330 h experiments. Electron microprobe and SEM data indicated the formation of needle-shaped crystals of serpentine composition along the walls of the fracture, and chemical analyses of sampled pore fluids were consistent with dissolution of ferro-magnesian minerals. By comparing the difference between fracture permeability and matrix permeability measured on intact samples of the same rock types, we concluded that the contribution of the low matrix permeability to flow is negligible and essentially all of the flow is focused in the tensile fracture. The experimental results suggest that the fracture network in long-lived hydrothermal circulation systems can be sealed rapidly as a result of mineral precipitation, and generation of new permeability resulting from a combination of tectonic and crystallization-induced stresses is required to maintain fluid circulation.

Mafic and ultramafic rocks, and platinum mineralisation potential, in the Longwood Range, Southland, New Zealand

International Nuclear Information System (INIS)

Ashley, P.; Craw, D.; Mackenzie, D.; Rombouts, M.; Reay, A.

2012-01-01

Intrusive rocks in the Longwood Range represent a component of the Permian Brook Street Terrane. They include diffusely layered, cumulate-textured olivine gabbro, troctolite, and gabbro, and gradations into non-cumulate gabbro and gabbronorite. Volumetrically small ultramafic layers occur (plagioclase wehrlite), and thin veins of felsic rocks ranging from quartz diorite to trondhjemite. Primary olivine, plagioclase, clinopyroxene, and subordinate orthopyroxene and hornblende are commonly altered or metamorphosed to amphiboles, minor spinel, magnetite, chlorite, biotite and clinozoisite, and serpentine in olivine-rich rocks. Accessory primary Ti-bearing magnetite and ilmenite occur, and trace Cr-magnetite is characteristic of olivine-rich rocks. Trace pyrrhotite, chalcopyrite, pentlandite, and pyrite could reflect equilibrated late magmatic, and alteration-derived phases. Key petrochemical characteristics of the rock suite are high Mg, Al, Ca, and Sr contents, and low alkali, LILE, and sulfur contents. Platinum and Pd are locally enriched in drill-hole intercepts, but zones appear unrelated to rock type, magnetic properties, or to S, Cu, Ni, Cr, or Au values. Local platinum group element (PGE) enrichment in altered rocks implies metamorphic and/or hydrothermal redistribution. Pervasive PGE enrichment in Longwood rocks is an indicator of potential 'fertility', but evidence is currently lacking for the precipitation of primary stratiform PGE accumulations from a sulfide liquid saturated magma. (author). 41 refs., 11 figs., 2 tabs.

Nickel speciation in several serpentine (ultramafic) topsoils via bulk synchrotron-based techniques

Energy Technology Data Exchange (ETDEWEB)

Siebecker, Matthew G.; Chaney, Rufus L.; Sparks, Donald L.

2017-07-01

Serpentine soils have elevated concentrations of trace metals including nickel, cobalt, and chromium compared to non-serpentine soils. Identifying the nickel bearing minerals allows for prediction of potential mobility of nickel. Synchrotron-based techniques can identify the solid-phase chemical forms of nickel with minimal sample treatment. Element concentrations are known to vary among soil particle sizes in serpentine soils. Sonication is a useful method to physically disperse sand, silt and clay particles in soils. Synchrotron-based techniques and sonication were employed to identify nickel species in discrete particle size fractions in several serpentine (ultramafic) topsoils to better understand solid-phase nickel geochemistry. Nickel commonly resided in primary serpentine parent material such as layered-phyllosilicate and chain-inosilicate minerals and was associated with iron oxides. In the clay fractions, nickel was associated with iron oxides and primary serpentine minerals, such as lizardite. Linear combination fitting (LCF) was used to characterize nickel species. Total metal concentration did not correlate with nickel speciation and is not an indicator of the major nickel species in the soil. Differences in soil texture were related to different nickel speciation for several particle size fractionated samples. A discussion on LCF illustrates the importance of choosing standards based not only on statistical methods such as Target Transformation but also on sample mineralogy and particle size. Results from the F-test (Hamilton test), which is an underutilized tool in the literature for LCF in soils, highlight its usefulness to determine the appropriate number of standards to for LCF. EXAFS shell fitting illustrates that destructive interference commonly found for light and heavy elements in layered double hydroxides and in phyllosilicates also can occur in inosilicate minerals, causing similar structural features and leading to false positive results in

Development of polymer concrete for dike insulation at LNG facilities: Phase 4, Low cost materials

Energy Technology Data Exchange (ETDEWEB)

Kukacka, L.E.

1991-01-01

Earlier GRI-sponsored work at Brookhaven National Laboratory has resulted in the development and utilization of insulating polymer concrete composites (IPC) as a means of reducing the evaporation rate of liquified natural gas in the event of a spill into a containment dike, thereby improving the safety at these sites. Although all of the required properties can be attained with the IPC, it was estimated that a low-cost replacement for the expensive organic binder would be necessary before use of the material would be cost-effective. In the current program, several latex modified cement formulations were evaluated and the most promising one identified. A mixture of two carboxylated styrene-butadiene latexes was selected for use in detailed laboratory property characterizations and a subsequent field evaluation. When compared to the properties of IPC, the latex-modified insulating materials display somewhat higher thermal conductivities, greater permeability to water, and reduced strength. However, these properties still meet most of the performance criteria, and the unit cost of the material is less than one-fifth that of IPC made with epoxy binders. When installed as a 0.75-in. thick overlay, material costs are estimated to be $1.00/ft{sup 2}.

Formation of pyroxenite layers in the Totalp ultramafic massif (Swiss Alps) - Insights from highly siderophile elements and Os isotopes

Science.gov (United States)

van Acken, David; Becker, Harry; Walker, Richard J.; McDonough, William F.; Wombacher, Frank; Ash, Richard D.; Piccoli, Phil M.

2010-01-01

Pyroxenitic layers are a minor constituent of ultramafic mantle massifs, but are considered important for basalt generation and mantle refertilization. Mafic spinel websterite and garnet-spinel clinopyroxenite layers within Jurassic ocean floor peridotites from the Totalp ultramafic massif (eastern Swiss Alps) were analyzed for their highly siderophile element (HSE) and Os isotope composition. Aluminum-poor pyroxenites (websterites) display chondritic to suprachondritic initial γOs (160 Ma) of -2 to +27. Osmium, Ir and Ru abundances are depleted in websterites relative to the associated peridotites and to mantle lherzolites worldwide, but relative abundances (Os/Ir, Ru/Ir) are similar. Conversely, Pt/Ir, Pd/Ir and Re/Ir are elevated. Aluminum-rich pyroxenites (clinopyroxenites) are characterized by highly radiogenic 187Os/ 188Os with initial γOs (160 Ma) between +20 and +1700. Their HSE composition is similar to that of basalts, as they are more depleted in Os, Ir and Ru compared to Totalp websterites, along with even higher Pt/Ir, Pd/Ir and Re/Ir. The data are most consistent with multiple episodes of reaction of mafic pyroxenite precursor melts with surrounding peridotites, with the highest degree of interaction recorded in the websterites, which typically occur in direct contact to peridotites. Clinopyroxenites, in contrast, represent melt-dominated systems, which retained the precursor melt characteristics to a large extent. The melts may have been derived from a sublithospheric mantle source with high Pd/Ir, Pt/Ir and Re/Os, coupled with highly radiogenic 187Os/ 188Os compositions. Modeling indicates that partial melting of subducted, old oceanic crust in the asthenosphere could be a possible source for such melts. Pentlandite and godlevskite are identified in both types of pyroxenites as the predominant sulfide minerals and HSE carriers. Heterogeneous HSE abundances within these sulfide grains likely reflect subsolidus processes. In contrast, large grain

An X-ray, EPMA, and oxygen isotope study of vermiculitized micas in the ultramafic rocks at Askos, Macedonia, Greece

International Nuclear Information System (INIS)

Tsirambides, A.; Michailidis, K.

1999-01-01

40% with the biotite percentage dominating in the mixed phase. Lower abundances (20-40%) of biotite/smectite and chlorite/vermiculite occur in both finer fractions (2-20 and <2 μm) of all vermiculitic samples. Vermiculite/smectite is very abundant in the <2 μm fractions of most vermiculitic samples. The DTA curves of the samples analyzed are characteristic of Mg-vermiculites. The electron microprobe analyses show a gradual K leaching from precursor mica with increasing degree of weathering. Oxygen isotope results confirm this assumption. Initially, hydrothermal fluids derived from the neighboring granitic intrusions, were responsible for the micatization of the primary minerals of the ultramafic bodies. Hydrothermal activity was also responsible for the partial formation of corrensite. Consequently, water moving downwards was very important for the formation of the vermiculite and other clay mineral mixed-layer phases through the alteration of micas and chlorite. The low relief and the long-lasting tectonic stability of the area were essential for the development of a significant thickness of the vermiculite zones. These vermiculites have properties desirable in certain building, agriculture, and horticulture products. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Polyphase serpentinization history of Mariana forearc mantle: observations on the microfabric of ultramafic clasts from ODP Leg 195, Site 1200

Science.gov (United States)

Kahl, Wolf-Achim; Jöns, Niels; Bach, Wolfgang; Klein, Frieder

2013-04-01

In the forearc of the Mariana subduction zone system, a number of seamounts form from extrusion of blueschist and serpentine mud. Ocean Drilling Program Leg 195 drilled the South Chamorro seamount, where ultramafic clasts occur within the mud matrix. These clasts show a complex serpentinization history, which bears the potential for tracking the alteration history during uplift and cooling of mantle wedge rocks to the seafloor. Moreover, the microfabrics of the highly serpentinized harzburgite and dunite clasts exhibit evidence for multiple fracturing events in the forearc mantle. These, in turn, lead to fluid influx and varied styles of serpentinization of harzburgite and dunite. The serpentinized ultramafic clasts exhibit a variety of microfabrics that range from virtually undeformed to strongly deformed samples. Pervasively serpentinized harzburgites feature either an equigranular fabric of serpentinized olivine and orthopyroxene crystals, or different vein generations related to multiple stages of serpentinization. Several types of fluid pathways in harzburgites are present: (i) veins containing brucite and iron oxides, developed linearly without marked conformance with the rock fabric. In places, these veins developed mm-cm wide halos with finger-shaped serpentinization fronts. Veins of type (i) are either developed as syntaxial veins from a single crack-seal event with large magnetite crystals growing from one wall to the other (as confirmed with high-resolution X-ray microtomography), or formed by multiple fluid events. (ii) serpentine veins that encompass regions of marginally serpentinized, microgranular olivine and large orthopyroxene crystals. (iii) extensional serpentine veins (known as "Frankenstein" type). In the clasts studied, their occurrence is restricted to the halo region of type (i) veins. (iv) as a late-stage feature, extensional veins documenting multiple crack-seal events can be present in the serpentinites (either in undeformed regions with

Effect of ultramafic intrusions and associated mineralized rocks on the aqueous geochemistry of the Tangle Lakes Area, Alaska: Chapter C in Studies by the U.S. Geological Survey in Alaska, 2011

Science.gov (United States)

Wang, Bronwen; Gough, Larry P.; Wanty, Richard B.; Lee, Gregory K.; Vohden, James; O’Neill, J. Michael; Kerin, L. Jack

2013-01-01

Stream water was collected at 30 sites within the Tangle Lakes area of the Delta mineral belt in Alaska. Sampling focused on streams near the ultramafic rocks of the Fish Lake intrusive complex south of Eureka Creek and the Tangle Complex area east of Fourteen Mile Lake, as well as on those within the deformed metasedimentary, metavolcanic, and intrusive rocks of the Specimen Creek drainage and drainages east of Eureka Glacier. Major, minor, and trace elements were analyzed in aqueous samples for this reconnaissance aqueous geochemistry effort. The lithologic differences within the study area are reflected in the major-ion chemistry of the water. The dominant major cation in streams draining mafic and ultramafic rocks is Mg2+; abundant Mg and low Ca in these streams reflect the abundance of Mg-rich minerals in these intrusions. Nickel and Cu are detected in 84 percent and 87 percent of the filtered samples, respectively. Nickel and Cu concentrations ranged from Ni life criteria; however, Cu concentrations exceed the hardness-based criteria for both chronic and acute exposure at some sites. The entire rare earth element (REE) suite is found in samples from the Specimen Creek sites MH5, MH4, and MH6 and, with the exception of Tb and Tm, at site MH14. These samples were all collected within drainages containing or downstream from Tertiary gabbro, diabase, and metagabbro (Trgb) exposures. Chondrite and source rock fractionation profiles for the aqueous samples were light rare earth element depleted, with negative Ce and Eu anomalies, indicating fractionation of the REE during weathering. Fractionation patterns indicate that the REE are primarily in the dissolved, as opposed to colloidal, phase.

Moessbauer Study of Serpentine Minerals in the Ultramafic Body of Tehuitzingo, Southern Mexico

International Nuclear Information System (INIS)

Gonzalez-Mancera, G.; Ortega-Gutierrez, F.; Nava, N. E.; Arriola, H. S.

2003-01-01

Serpentine 'polymorph' minerals (chrysotile, lizardite, and antigorite) are hydrous Mg-Fe silicates that commonly form serpentine rock (serpentinite) by hydration of olivine-pyroxene peridotites from the mantle of the Earth. During the complex geologic history of orogenic belts, the redox and hydration state of the mantle changes, and olivine and pyroxenes are replaced by serpentine group minerals during tectonic deformation and uplift. Unfortunately, modern microanalysis of minerals by electron probe does not distinguish the oxidation state of iron, and it has to be assumed or estimated by precise methods, such as Moessbauer spectrometry. The studied samples were collected in the Xayacatlan Formation of the Tehuitzingo area, State of Puebla, within the Paleozoic Acatlan Complex. The original mantle peridotite was completely converted to serpentinite, with secondary crystallization of Fe-Mg oxides, calcsilicates, and carbonates. The three serpentine 'polymorphs' were identified in the studied samples, although with a clear predominance of the high-temperature member antigorite, which was preliminary determined by optical petrography, X-ray diffraction, electron probe, and scanning electron microscopy. Microprobe total iron content in most specimens was +3 substitution at the tetrahedral site may also occur according to some Moessbauer studies. This paper studied the iron valence state and its position in serpentine minerals of the Tehuitzingo ultramafic body using Moessbauer techniques. The analyses in most samples detected one doublet, compatible with Fe +2 in octahedral coordination, but only two specimens displayed two doublets corresponding to Fe +2 and Fe +3 in octahedral coordination. Doublets corresponding to Fe +3 in tetrahedral sites were not found. The parameters obtained for all the Fe +2 doublets are similar (QS=2.76±0.08 mm/sec, and IS=1.12±0.01), whereas the ratio Fe +3 /Fe +2 (0-0.34) has a strong tendency for iron to be in a divalent state. This

Miocene Basaltic Lava Flows and Dikes of the Intervening Area Between Picture Gorge and Steens Basalt of the CRBG, Eastern Oregon

Science.gov (United States)

Cahoon, E. B.; Streck, M. J.

2016-12-01

Mid-Miocene basaltic lavas and dikes are exposed in the area between the southern extent of the Picture Gorge Basalt (PGB) and the northern extent of Steens Basalt in a wide corridor of the Malheur National Forest, eastern Oregon. An approximate mid-Miocene age of sampled basaltic units is indicated by stratigraphic relationships to the 16 Ma Dinner Creek Tuff. Lavas provide an opportunity to extend and/or revise distribution areas of either CRBG unit and explore the petrologic transition between them. The PGB and the Steens Basalt largely represent geochemically distinct tholeiitic units of the CRBG; although each unit displays internal complexity. Lavas of PGB are relatively primitive (MgO 5-9 wt.%) while Steens Basalt ranges in MgO from >9 to 3 wt.% but both units are commonly coarsely porphyritic. Conversely, Steens Basalt compositions are on average more enriched in highly incompatible elements (e.g. Rb, Th) and relatively enriched in the lesser incompatible elements (e.g. Y, Yb) compared to the Picture Gorge basalts. These compositional signatures produce inclined and flat patterns on mantle-normalized incompatible trace element plots but with similar troughs and spikes, respectively. New compositional data from our study area indicate basaltic lavas can be assigned as PGB lava flows and dikes, and also to a compositional group chemically distinct between Steens Basalt and PGB. Distribution of lava flows with PGB composition extend this CRBG unit significantly south/southeast closing the exposure gap between PGB and Steens Basalt. We await data that match Steens Basalt compositions but basaltic lavas with petrographic features akin to Steens Basalt have been identified in the study area. Lavas of the transitional unit share characteristics with Upper Steens and Picture Gorge basalt types, but identify a new seemingly unique composition. This composition is slightly more depleted in the lesser incompatible elements (i.e. steeper pattern) on mantle normalized

Variscan potassic dyke magmatism of durbachitic affinity at the southern end of the Bohemian Massif (Lower Austria)

Science.gov (United States)

Zeitlhofer, Helga; Grasemann, Bernhard; Petrakakis, Konstantin

2016-06-01

Dykes in the Strudengau area (SW Moldanubian Zone, Austria) can be mineralogically divided into lamprophyres (spessartites and kersantites) and felsic dykes (granite porphyries, granitic dykes and pegmatoid dykes). Geochemical analyses of 11 lamprophyres and 7 felsic dykes show evidence of fractional crystallization. The lamprophyres are characterized by metaluminous compositions, intermediate SiO2 contents and high amounts of MgO and K2O; these rocks have high Ba (800-3000 ppm) and Sr (250-1000 ppm) contents as well as an enrichment of large-ion lithophile elements over high field strength elements, typical for enriched mantle sources with variable modifications due to fractionation and crustal contamination. This geochemical signature has been reported from durbachites (biotite- and K feldspar-rich mela-syenites particularly characteristic of the Variscan orogen in Central Europe). For most major elements, calculated fractionation trends from crystallization experiments of durbachites give an excellent match with the data from the Strudengau dykes. This suggests that the lamprophyres and felsic dykes were both products of fractional crystallization and subsequent magma mixing of durbachitic and leucogranitic melts. Rb-Sr geochronological data on biotite from five undeformed kersantites and a locally deformed granite porphyry gave cooling ages of c. 334-318 Ma, indicating synchronous intrusion of the dykes with the nearby outcropping Weinsberger granite (part of the South Bohemian Batholith, c. 330-310 Ma). Oriented matrix biotite separated from the locally deformed granite porphyry gave an Rb-Sr age of c. 318 Ma, interpreted as a deformation age during extensional tectonics. We propose a large-scale extensional regime at c. 320 Ma in the Strudengau area, accompanied by plutonism of fractionated magmas of syncollisional mantle-derived sources, mixed with crustal components. This geodynamic setting is comparable to other areas in the Variscan belt documenting an

Geochemical models of metasomatism in ultramafic systems: Serpentinization, rodingitization, and sea floor carbonate chimney precipitation

Science.gov (United States)

Palandri, J.L.; Reed, M.H.

2004-01-01

In a series of water-rock reaction simulations, we assess the processes of serpentinization of harzburgite and related calcium metasomatism resulting in rodingite-type alteration, and seafloor carbonate chimney precipitation. At temperatures from 25 to 300??C (P = 10 to 100 bar), using either fresh water or seawater, serpentinization simulations produce an assemblage commonly observed in natural systems, dominated by serpentine, magnetite, and brucite. The reacted waters in the simulations show similar trends in composition with decreasing water-rock ratios, becoming hyper-alkaline and strongly reducing, with increased dissolved calcium. At 25??C and w/r less than ???32, conditions are sufficiently reducing to yield H2 gas, nickel-iron alloy and native copper. Hyperalkalinity results from OH- production by olivine and pyroxene dissolution in the absence of counterbalancing OH- consumption by alteration mineral precipitation except at very high pH; at moderate pH there are no stable calcium minerals and only a small amount of chlorite forms, limited by aluminum, thus allowing Mg2+ and Ca2+ to accumulate in the aqueous phase in exchange for H+. The reducing conditions result from oxidation of ferrous iron in olivine and pyroxene to ferric iron in magnetite. Trace metals are computed to be nearly insoluble below 300??C, except for mercury, for which high pH stabilizes aqueous and gaseous Hg??. In serpentinization by seawater at 300??C, Ag, Au, Pd, and Pt may approach ore-forming concentrations in sulfide complexes. Simulated mixing of the fluid derived from serpentinization with cold seawater produces a mineral assemblage dominated by calcite, similar to recently discovered submarine, ultramafic rock-hosted, carbonate mineral deposits precipitating at hydrothermal vents. Simulated reaction of gabbroic or basaltic rocks with the hyperalkaline calcium- and aluminum-rich fluid produced during serpentinization at 300??C yields rodingite-type mineral assemblages, including

The physical properties of coal

CSIR Research Space (South Africa)

Van Schoor, Abraham M

2015-01-01

Full Text Available FORMATION KIMBERLITE LAMPROPHYRE LAVA LIMESTONE LUTACEOUS ARENITE LUTITE MAGNETITE METAMORPHIC ROCKS MONZONITE NORITE OLIVINE GABBRO PLUTONIC ROCKS PYROCLASTIC BRECCIA PYROXENITE QUARTZ DIORITE RHYOLITE RUDITE SAND SEDIMENTARY SILCRETE SILICICLASTIC SEDIMENT...

Impact on the deep biosphere of CO2 geological sequestration in (ultra)mafic rocks and retroactive consequences on its fate

Science.gov (United States)

Ménez, Bénédicte; Gérard, Emmanuelle; Rommevaux-Jestin, Céline; Dupraz, Sébastien; Guyot, François; Arnar Alfreősson, Helgi; Reynir Gíslason, Sigurőur; Sigurőardóttir, Hólmfríiur

2010-05-01

Due to their reactivity and high potential of carbonation, mafic and ultramafic rocks constitute targets of great interest to safely and permanently sequestrate anthropogenic CO2 and thus, limit the potential major environmental consequences of its increasing atmospheric level. In addition, subsurface (ultra)mafic environments are recognized to harbor diverse and active microbial populations that may be stimulated or decimated following CO2 injection (± impurities) and subsequent acidification. However, the nature and amplitude of the involved biogeochemical pathways are still unknown. To avoid unforeseen consequences at all time scales (e.g. reservoir souring and clogging, bioproduction of H2S and CH4), the impact of CO2 injection on deep biota with unknown ecology, and their retroactive effects on the capacity and long-term stability of CO2 storage sites, have to be determined. We present here combined field and experimental investigations focused on the Icelandic pilot site, implemented in the Hengill area (SW Iceland) at the Hellisheidi geothermal power plant (thanks to the CarbFix program, a consortium between the University of Iceland, Reykjavik Energy, the French CNRS of Toulouse and Columbia University in N.Y., U.S.A. and to the companion French ANR-CO2FIX project). This field scale injection of CO2 charged water is here designed to study the feasibility of storing permanently CO2 in basaltic rocks and to optimize industrial methods. Prior to the injection, the microbiological initial state was characterized through regular sampling at various seasons (i.e., October '08, July '09, February '10). DNA was extracted and amplified from the deep and shallow observatory wells, after filtration of 20 to 30 liters of groundwater collected in the depth interval 400-980 m using a specifically developed sampling protocol aiming at reducing contamination risks. An inventory of living indigenous bacteria and archaea was then done using molecular methods based on the

Unraveling multiple phases of sulfur cycling during the alteration of ancient ultramafic oceanic lithosphere

Science.gov (United States)

Schwarzenbach, Esther M.; Gill, Benjamin C.; Johnston, David T.

2018-02-01

Ultramafic-hosted hydrothermal systems - characterized by ongoing serpentinization reactions - exert an important influence on the global sulfur cycle. Extensive water-rock interaction causes elemental exchange between seawater and the oceanic lithosphere, effectively removing sulfate from seawater through both abiogenic and biogenic processes. Here, we use bulk rock multiple sulfur isotope signatures (32S, 33S, 34S) and in situ sulfide analyses together with petrographic observations to track the sulfur cycling processes and the hydrothermal evolution of ancient peridotite-hosted hydrothermal systems. We investigate serpentinized peridotites from the Northern Apennine ophiolite in Italy and the Santa Elena ophiolite in Costa Rica and compare those with the Iberian Margin (Ocean Drilling Program (ODP) Leg 149 and 173) and the 15°20‧N Fracture Zone along the Mid-Atlantic Ridge (ODP Leg 209). In situ measurements of sulfides in the Northern Apennine serpentinites preserve a large range in δ34Ssulfide of -33.8 to +13.3‰ with significant heterogeneities within single sulfide grains and depending on mineralogy. Detailed mineralogical investigation and comparison with bulk rock Δ33Ssulfide and in situ δ34Ssulfide data implies a thermal evolution of the system from high temperatures (∼350 °C) that allowed thermochemical sulfate reduction and input of hydrothermal sulfide to lower temperatures (rock associated with detachment faulting along a mid-ocean ridge spreading center. The Santa Elena peridotites preserve distinct signatures for fluid circulation at high temperatures with both closed system thermochemical sulfate reduction and input of mafic-derived sulfur. In addition, the peridotites provide strong evidence that low Ca2+ concentrations in peridotite-hosted systems can limit sulfate removal during anhydrite precipitation at temperatures above 150 °C. This may play a central role for the availability of sulfate to microbial communities within these

Mineral chemistry and petrology of highly magnesian ultramafic cumulates from the Sarve-Abad (Sawlava) ophiolites (Kurdistan, NW Iran): New evidence for boninitic magmatism in intra-oceanic fore-arc setting in the Neo-Tethys between Arabia and Iran

Science.gov (United States)

Allahyari, Khalil; Saccani, Emilio; Rahimzadeh, Bahman; Zeda, Ottavia

2014-01-01

The Sarve-Abad (Sawlava) ophiolitic complex consists of several tectonically dismembered ophiolitic sequences. They are located along the Main Zagros Thrust Zone, which marks the ophiolitic suture between the Arabian and Sanandaj-Sirjan continental blocks. They represent a portion of the southern Neo-Tethyan oceanic lithosphere, which originally existed between the Arabian (to the south) and Eurasian (to the north) continental margins. The Sarve-Abad ophiolites include cumulitic lherzolites bearing minor dunite and chromitite lenses in places. The main rock-forming minerals in ultramafic cumulates are cumulus olivine and inter-cumulus clinopyroxene and orthopyroxene. Minor (<5%) chromian spinel occurs as both cumulus and inter-cumulus phases.

Hydrogeochemical and stream sediment detailed geochemical survey for Thomas Range-Wasatch, Utah. Cottonwood project area

International Nuclear Information System (INIS)

Butz, T.R.; Bard, C.S.; Witt, D.A.; Helgerson, R.N.; Grimes, J.G.; Pritz, P.M.

1980-01-01

Results of Cottonwood project area of the Thomas Range-Wasatch detailed geochemical survey are reported. Field and laboratory data are presented for 15 groundwater samples, 79 stream sediment samples, and 85 radiometric readings. Statistical and areal distributions of uranium and possible uranium-related variables are given. A generalized geologic map of the project area is provided, and pertinent geologic factors which may be of significance in evaluating the potential for uranium mineralization are briefly discussed. Uranium concentrations in groundwater range from 0.25 to 3.89 ppB. The highest concentrations are from groundwaters from the Little Cottonwood and Ferguson Stocks. Variables that appear to be associated with uranium in groundwater include cobalt, iron, potassium, manganese, nickel, sulfate, and to a lesser extent, molybdenum and strontium. This association is attributed to the Monzonitic Little Cottonwood Stock, granodioritic to granitic and lamprophyric dikes, and known sulfide deposits. Soluble uranium concentrations (U-FL) in stream sediments range from 0.31 to 72.64 ppM. Total uranium concentrations (U-NT) range from 1.80 to 75.20 ppM. Thorium concentrations range from <2 to 48 ppM. Anomalous values for uranium and thorium are concentrated within the area of outcrop of the Little Cottonwood and Ferguson Stocks. Variables which are areally associated with high values of uranium, thorium, and the U-FL:U-NT ratio within the Little Cottonwood Stock are barium, copper, molybdenum, and zinc. High concentrations of these variables are located near sulfide deposits within the Little Cottonwood Stock

The Krásná Hora, Milešov, and Příčovy Sb-Au ore deposits, Bohemian Massif: mineralogy, fluid inclusions, and stable isotope constraints on the deposit formation

Science.gov (United States)

Němec, Matěj; Zachariáš, Jiří

2018-02-01

The Krásná Hora-Milešov and Příčovy districts (Czech Republic) are the unique examples of Sb-Au subtype orogenic gold deposits in the Bohemian Massif. They are represented by quartz-stibnite veins and massive stibnite lenses grading into low-grade, disseminated ores in altered host rocks. Gold postdates the stibnite and is often replaced by aurostibite. The ore zones are hosted by hydrothermally altered dikes of lamprophyres (Krásná Hora-Milešov) or are associated with local strike-slip faults (Příčovy). Formation of Sb-Au deposits probably occurred shortly after the main gold-bearing event (348-338 Ma; Au-only deposits) in the central part of the Bohemian Massif. Fluid inclusion analyses suggest that stibnite precipitated at 250 to 130 °C and gold at 200 to 130 °C from low-salinity aqueous fluids. The main quartz gangue hosting the ore precipitated from the same type of fluid at about 300 °C. Early quartz-arsenopyrite veins are not associated with the Sb-Au deposition and formed from low-salinity, aqueous-carbonic fluid at higher pressure and temperature ( 250 MPa, 400 °C). The estimated oxygen isotope composition of the ore-bearing fluid (4 ± 1‰ SMOW; based on post-ore calcite) suggests its metamorphic or mixed magmatic-metamorphic origin and excludes the involvement of meteoric water. Rapid cooling of warm hydrothermal fluids reacting with "cold" host rock was probably the most important factor in the formation of both stibnite and gold.

Radiometric ages of some igneous rocks from the southern and southwestern coalfields of New South Wales

International Nuclear Information System (INIS)

Carr, P.F.; Facer, R.A.

1980-01-01

Samples from six igneous rock units of the Southern and Southwestern Coalfields (Sydney Basin) of New South Wales have been dated using the K-Ar radiometric technique. The following ages were determined: a dolerite from Towradgi, 243 +- 10 MY; a dolerite from a diamond-drill hole at Sutton Forest, 202 +- 8 MY; the Bong Bong Basalt, 190 +- 8 MY; the Good Dog Lamprophyre, 101 +- 4 MY; a teschenite from South Bulli coal mine 74.0 +- 3.6 MY; and a dolerite from Robertson, 63.8 +- 3.2 MY. Combination of these new ages wth previously-published ages indicates that igneous activity in the Southern and Southwestern Coalfields occurred during four discrete periods of time - Middle-to-Late Permian; Late Triassic to Early Jurassic; mid-Cretaceous (only the Good Dog Lamprophyre has yielded such an age); and latest Cretaceous to Late Oligocene

Field-trip guide to the vents, dikes, stratigraphy, and structure of the Columbia River Basalt Group, eastern Oregon and southeastern Washington

Science.gov (United States)

Camp, Victor E; Reidel, Stephen P.; Ross, Martin E.; Brown, Richard J.; Self, Stephen

2017-06-22

The Columbia River Basalt Group covers an area of more than 210,000 km2 with an estimated volume of 210,000 km3. As the youngest continental flood-basalt province on Earth (16.7–5.5 Ma), it is well preserved, with a coherent and detailed stratigraphy exposed in the deep canyonlands of eastern Oregon and southeastern Washington. The Columbia River flood-basalt province is often cited as a model for the study of similar provinces worldwide.This field-trip guide explores the main source region of the Columbia River Basalt Group and is written for trip participants attending the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon, USA. The first part of the guide provides an overview of the geologic features common in the Columbia River flood-basalt province and the stratigraphic terminology used in the Columbia River Basalt Group. The accompanying road log examines the stratigraphic evolution, eruption history, and structure of the province through a field examination of the lavas, dikes, and pyroclastic rocks of the Columbia River Basalt Group.

Airborne gamma-ray and magnetic anomaly signatures of serpentinite in relation to soil geochemistry, northern California

Science.gov (United States)

McCafferty, A.E.; Van Gosen, B. S.

2009-01-01

Serpentinized ultramafic rocks and associated soils in northern California are characterized by high concentrations of Cr and Ni, low levels of radioelements (K, Th, and U) and high amounts of ferrimagnetic minerals (primarily magnetite). Geophysical attributes over ultramafic rocks, which include airborne gamma-ray and magnetic anomaly data, are quantified and provide indirect measurements on the relative abundance of radioelements and magnetic minerals, respectively. Attributes are defined through a statistical modeling approach and the results are portrayed as probabilities in chart and map form. Two predictive models are presented, including one derived from the aeromagnetic anomaly data and one from a combination of the airborne K, Th and U gamma-ray data. Both models distinguish preferential values within the aerogeophysical data that coincide with mapped and potentially unmapped ultramafic rocks. The magnetic predictive model shows positive probabilities associated with magnetic anomaly highs and, to a lesser degree, anomaly lows, which accurately locate many known ultramafic outcrops, but more interestingly, locate potentially unmapped ultramafic rocks, possible extensions of ultramafic bodies that dip into the shallow subsurface, as well as prospective buried ultramafic rocks. The airborne radiometric model shows positive probabilities in association with anomalously low gamma radiation measurements over ultramafic rock, which is similar to that produced by gabbro, metavolcanic rock, and water bodies. All of these features share the characteristic of being depleted in K, Th and U. Gabbro is the only rock type in the study area that shares similar magnetic properties with the ultramafic rock. The aerogeophysical model results are compared to the distribution of ultramafic outcrops and to Cr, Ni, K, Th and U concentrations and magnetic susceptibility measurements from soil samples. Analysis of the soil data indicates high positive correlation between

Characterization and sources of colored dissolved organic matter in a coral reef ecosystem subject to ultramafic erosion pressure (New Caledonia, Southwest Pacific).

Science.gov (United States)

Martias, Chloé; Tedetti, Marc; Lantoine, François; Jamet, Léocadie; Dupouy, Cécile

2018-03-01

The eastern lagoon of New Caledonia (NC, Southwest Pacific), listed as a UNESCO World Heritage site, hosts the world's second longest double-barrier coral reef. This lagoon receives river inputs, oceanic water arrivals, and erosion pressure from ultramafic rocks, enriched in nickel (Ni) and cobalt (Co). The aim of this study was to characterize colored dissolved organic matter (CDOM), as well as to determine its main sources and its possible relationships (through the use of Pearson correlation coefficients, r) with biogeochemical parameters, plankton communities and trace metals in the NC eastern lagoon. Water samples were collected in March 2016 along a series of river/lagoon/open-ocean transects. The absorption coefficient at 350nm (a 350 ) revealed the influence of river inputs on the CDOM distribution. The high values of spectral slope (S 275-295 , >0.03m -1 ) and the low values of specific ultraviolet absorbance (SUVA 254 , CDOM in surface waters. The application of parallel factor analysis (PARAFAC) on excitation-emission matrices (EEMs) allowed the identification of four CDOM components: (1) one humic- and one tyrosine-like fluorophores. They had terrestrial origin, exported through rivers and undergoing photo- and bio-degradation in the lagoon. These two fluorophores were linked to manganese (Mn) in southern rivers (r=0.46-0.50, n=21, pCDOM sources in the NC eastern lagoon. Copyright © 2017 Elsevier B.V. All rights reserved.

Geophysical and geological surveys along the northeastern flank of Mount error, Northwestern Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Ramana, M.V.; Rajendraprasad, B.; Hansen, R.D.

of the seamount suggest an igneous basement consisting of lamprophyre occuring as a thin slab (sill). Further, the average bathymetric contour of 4500 m and the magnetic model studies suggest that the lower boundary of the magnetisation contrast perhaps coincides...

Petrology and geochemistry of Variscan dykes from the Jáchymov (Joachimsthal) ore district, Czech Republic

Czech Academy of Sciences Publication Activity Database

Štemprok, M.; Seifert, T.; Holub, F. V.; Chlupáčová, M.; Dolejš, D.; Novák, Jiří Karel; Pivec, E.; Lang, Miloš

2008-01-01

Roč. 53, č. 1 (2008), s. 65-104 ISSN 1802-6222 Institutional research plan: CEZ:AV0Z30130516 Keywords : lamprophyre * granite porphyry * uranium mineralization * magma mixing * Western Krušné hory/Erzgebirge Pluton Subject RIV: DB - Geology ; Mineralogy

Development of polymer concrete for dike insulation at LNG facilities: Phase 4, Low cost materials. Final report, September 1, 1987--April 30, 1990

Energy Technology Data Exchange (ETDEWEB)

Kukacka, L.E.

1991-01-01

Earlier GRI-sponsored work at Brookhaven National Laboratory has resulted in the development and utilization of insulating polymer concrete composites (IPC) as a means of reducing the evaporation rate of liquified natural gas in the event of a spill into a containment dike, thereby improving the safety at these sites. Although all of the required properties can be attained with the IPC, it was estimated that a low-cost replacement for the expensive organic binder would be necessary before use of the material would be cost-effective. In the current program, several latex modified cement formulations were evaluated and the most promising one identified. A mixture of two carboxylated styrene-butadiene latexes was selected for use in detailed laboratory property characterizations and a subsequent field evaluation. When compared to the properties of IPC, the latex-modified insulating materials display somewhat higher thermal conductivities, greater permeability to water, and reduced strength. However, these properties still meet most of the performance criteria, and the unit cost of the material is less than one-fifth that of IPC made with epoxy binders. When installed as a 0.75-in. thick overlay, material costs are estimated to be $1.00/ft{sup 2}.

Truly Distributed Optical Fiber Sensors for Structural Health Monitoring: From the Telecommunication Optical Fiber Drawling Tower to Water Leakage Detection in Dikes and Concrete Structure Strain Monitoring

Directory of Open Access Journals (Sweden)

Jean-Marie Henault

2010-01-01

Full Text Available Although optical fiber sensors have been developed for 30 years, there is a gap between lab experiments and field applications. This article focuses on specific methods developed to evaluate the whole sensing chain, with an emphasis on (i commercially-available optoelectronic instruments and (ii sensing cable. A number of additional considerations for a successful pairing of these two must be taken into account for successful field applications. These considerations are further developed within this article and illustrated with practical applications of water leakage detection in dikes and concrete structures monitoring, making use of distributed temperature and strain sensing based on Rayleigh, Raman, and Brillouin scattering in optical fibers. They include an adequate choice of working wavelengths, dedicated localization processes, choices of connector type, and further include a useful selection of traditional reference sensors to be installed nearby the optical fiber sensors, as well as temperature compensation in case of strain sensing.

Compositional diversity in peridotites as result of a multi-process history: The Pacific-derived Santa Elena ophiolite, northwest Costa Rica

Science.gov (United States)

Escuder-Viruete, Javier; Baumgartner, Peter O.; Castillo-Carrión, Mercedes

2015-08-01

The Santa Elena ophiolite (SEO) is an ultramafic nappe of more than 270 km2 overlying a tectonic serpentinite-matrix mélange in northwest Costa Rica. It is mainly composed of Cpx-rich and Cpx-poor harzburgites (~ 2.5 km-thick), with minor lherzolite, dunite and chromitite, as well as intrusive mafic sills and subvertical dikes, which coalesce into an upper Isla Negritos gabbroic sill complex. Minerals and whole-rock features of the Cpx-rich and Cpx-poor harzburgites share features of the abyssal and supra-subduction zone (SSZ) peridotites, respectively. To explain these characteristics two-stages of melting and refertilization processes are required. By means of trace element modeling, the composition of Cpx-rich harzburgites may be reproduced by up to ~ 5-10% melting of a primitive mantle source, and the composition of Cpx-poor harzburgites and dunites by ~ 15-18% melting of an already depleted mantle. Therefore, the Cpx-rich harzburgites can be interpreted as product of first-stage melting and low-degrees of melt-rock interaction in a mid-ocean ridge environment, and the Cpx-poor harzburgites and dunites as the product of second-stage melting and refertilization in a SSZ setting. The mafic sills and the Isla Negrito gabbros are genetically related and can be explained as crystallization from the liquids that were extracted from the lower SSZ mantle levels and emplaced at shallow conditions. The Murciélagos Island basalts are not directly related to the ultramafic and mafic rocks of the SEO. Their E-MORB-like composition is similar to most of the CLIP mafic lavas and suggests a common Caribbean plume-related source. The SEO represents a fragment of Pacific-derived, SSZ oceanic lithosphere emplaced onto the southern North America margin during the late Cretaceous. Because of the predominance of rollback-induced extension during its history, only a limited amount of crustal rocks were formed and preserved in the SEO.

Petrology and deformation style of lithospheric mantle beneath the Heldburg Dike swarm (Central Germany) subset of Central European Volcanic Province

Science.gov (United States)

Kukuła, Anna; Puziewicz, Jacek; Hidas, Károly; Ntaflos, Theodoros; Matusiak-Małek, Magdalena; Milke, Ralf

2017-04-01

The Heldburg Dike swarm is a set of Cenozoic alkali basalt dikes occurring in the central part of Germany at the border between Thuringia and Bavaria. We studied xenoliths from Strauf, Feldstein, Bramberg and from the active quarry in Zeilberg. The peridotites from Strauf, Feldstein and Bramberg have the composition of spinel lherzolite (15), spinel harzburgite (9) and dunite (3). They vary in size from 1.5 cm (Strauf) up to 20 cm (Zeilberg). We distinguish groups (A, A- and B) of peridotites based on different forsterite content in olivine. Group A consists of olivine (89.6 - 91.8 Fo), orthopyroxene (Mg# 0.90-0.93, Al 0.05-0.18 a pfu), clinopyroxene (Mg# 0.87-0.95, Al 0.06-0.26 a pfu) and spinel (Cr# 0.13-0.65, Mg# 0.54-0.78). Clinopyroxene rare earth elements (REE) patterns are S-shaped (Feldstein, Bramberg) or U-shaped (Strauf); spoon-shaped patterns occur occasionally. Trace element (TE) patterns show negative Nb, Ta, Zr, Hf, Ti and positive Th, U anomalies. The most magnesian clinopyroxene (xenolith 3140, Feldstein) is strongly aluminous and LREE depletedwith weak anomalies in TE patterns. Group A- is contains olivine (88.9-89.5 Fo), orthopyroxene (Mg# 0.89-0.90, Al 0.10-0.13 a pfu) and clinopyroxene (Mg# 0.90-0.92, Al 0.10-0.17 a pfu). Clinopyroxene is increasingly enriched in REEs from Lu to La. TE patterns are similar to those of group A but with less pronounced anomalies. Group B (3 xenoliths only) consists of olivine Fo 86.7-88.9, orthopyroxene (Mg# 0.88-0.89, Al 0.07-0.19 a pfu), clinopyroxene (Mg# 0.88-0.90, Al 0.10-0.26 a pfu). Clinopyroxene is enriched in LREE, concave upward in Pr. TE patterns are similar to those in group A. One of group B harzburgites contains grains (up to 0.5 mm) of Ca-Mg carbonate located in interstices. The clinopyroxene chemical composition plots away from the melting trend in the MgO-Al2O3 diagram of Upton et al. (2011), suggesting a later addition of the clinopyroxene. The composition of orthopyroxene corresponds to ca. 15

The Santa Rita Shear Zone: Major Mesozoic deformation along the western flank of the White-Inyo Range, CA

Energy Technology Data Exchange (ETDEWEB)

Brudos, T.C.; Paterson, S.R. (Univ. of Southern California, Los Angeles, CA (United States). Dept. of Geological Sciences)

1993-04-01

The Santa Rita Shear Zone (SRSZ), briefly described by Ross (1967), deforms the western part of the 164 Ma Santa Rita Flat pluton (SRFP), located SSE of Big Pine, CA. The SRSZ comprises a subvertical zone of solid-state deformation (strike N15E) over an area at least 13 km long by 2--3 km wide. Exposure of the shear zone is limited to the north and west by overlying Quaternary volcanics and basin fill within the Late Cenozoic Owens Valley graben. The SRSZ is larger than its present outcrop extent: strain magnitudes are highest within the westernmost exposures. The SRSZ along this western margin is a continuous zone of deformation comprising a mm-scale solid-state foliation containing igneous feldspars flattened into ovals with > 10:1 aspect ratios. The authors have identified three dike phases within the SRFP: (1) minor NE-striking Phase 1 dikes, comprising cm-scale aplites; (2) widespread m-scale Phase 2 dikes, which strike N10E; and (3) m-scale NW-striking Phase 3 mafic dikes. The Phase 1 and Phase 3 dikes are pre- and post-tectonic respectively; observations described below indicate the Phase 2 dikes are syn- to post-deformation. Deformation becomes localized along the Phase 2 dikes -- which are parallel to the orientation of the main body of the shear zone. Solid-state fabrics imposed on the Phase 2 dikes formed at higher temperatures than those within the SRFP, and in the east the SRFP is deformed only within a few cm of the dikes. They surmise syntectonic emplacement of the dikes into dislocational surfaces within the SRSZ, followed by solid-state deformation of the cooling dikes. Several workers have suggested the dikes within the SRFP are part of the 148 Ma independence dike swarm (referring to the Phase 2 or 3 dikes). If correct, this correlation indicates a Jurassic age for the SRSZ. Radiometric analyses of the dikes are in progress.

Precambrian tholeiitic-dacitic rock-suites and Cambrian ultramafic rocks in the Pennine nappe system of the Alps: Evidence from Sm-Nd isotopes and rare earth elements

Science.gov (United States)

Stille, P.; Tatsumoto, M.

1985-04-01

Major element, trace element and Sm-Nd isotope analyses were made of polymetamorphic hornblendefelses, plagioclase amphibolites and banded amphibolites from the Berisal complex in the Simplon area (Italy, Switzerland) to determine their age, origin and genetic relationships. In light of major and rare earth element data, the hornblendefelses are inferred to have originally been pyroxene-rich cumulates, the plagioclase amphibolites and the dark layers of the banded amphibolites to have been tholeiitic basalts and the light layers dacites. The Sm-Nd isotope data yield isochron ages of 475±81 Ma for the hornblendefelses, 1,018±59 Ma for the plagioclase amphibolites and 1,071±43 Ma for the banded amphibolites. The 1 Ga magmatic event is the oldest one ever found in the crystalline basement of the Pennine nappes. The Sm -Nd isotope data support the consanguinity of the tholeiitic dark layers and the dacitic light layers of the banded amphibolites with the tholeiitic plagioclase amphibolites and the ultramafic hornblendefelses. The initial ɛ Nd values indicate that all three rock types originated from sources depleted in light rare earth elements. We suggest that plagioclase and banded amphibolites were a Proterozoic tholeiite-dacite sequence that was strongly deformed and flattened during subsequent folding. The hornblendefelses are thought to be Cambrian intrusions of pyroxene-rich material.

Potencial agroecológico de Ateleia cubensis (DC Dietr. var. cubensis (Griseb. Mohlenber en condiciones naturales del núcleo ultramáfico de Camagüey/Agroecological potential of Ateleia cubensis (DC Dietr. var. cubensis (Griseb. Mohlenber in natural conditions of Camagüey ultramafic core

Directory of Open Access Journals (Sweden)

Delmy Triana González

2014-09-01

Full Text Available RESUMEN Con el objetivo de evaluar el potencial agroecológico de Ateleia cubensis (DC Dietr. var. cubensis (Griseb. Mohlenber en condiciones naturales del núcleo ultramáfico de Camagüey, se desarrolló un estudio en el municipio Minas, durante los meses comprendidos entre enero del 2014 y enero del año 2015, sobre un suelo Fersialítico rojo pardusco ferromagnesial (Inceptisol - Cambisol. Se estimó la densidad natural de la especie en el área a través de 20 parcelas de muestreo permanentes (36 m2 distribuidas aleatoriamente, se determinó la densidad de la madera para ser utilizada en el cálculo del carbono retenido, el volumen de madera, raíces, follaje y hojarasca. Los resultados muestran una densidad de 8 055 plantas /ha de A. cubensis con beneficios desde el punto de vista agroecológico reconocido por las bondades que ofrece al ecosistema. ABSTRACT Agroecological potential of Ateleia cubensis (DC Dietr. var. cubensis (Griseb. Mohlenber in natural conditions of Camagüey ultramafic core In order to evaluate the agroecological potential of o Ateleia cubensis (DC Dietr. var. cubensis (Griseb. Mohlenber in natural conditions of Camagüey ultramafic core, a study was conducted in the municipality Minas, during the months between January 2014 and January 2015, on a brownish red soil Fersialitic ferromagnesian (Inceptisol - Cambisol. The natural density of the species in the area through 20 permanent sample plots (36 m2 randomly distributed, estimated density of the wood to be used in the calculation of carbon retained, the volume of wood, roots, foliage was determined and stubble. The results show a density of 8 055 plants / ha of A. cubensis with benefits from the agroecological point of view recognized the advantages offered to ecosystem.

The Late Cretaceous Alkaline Igneous Province in the Iberian Peninsula, and its tectonic significance

Science.gov (United States)

Rock, N. M. S.

1982-04-01

The Iberian Province consists of the following: the three subvolcanic, syenitic, major intrusive complexes of Monchique, Sines and Sintra in W. and SW Portugal, together with their basanitic/lamprophyric minor intrusive suites; basanitic volcanic complexes around Lisbon; at least some of a widespread suite of basanitic to theralitic minor intrusives in west central Portugal; about 80 small basanitic/lamprophyric to nepheline syenitic intrusions scattered through the Pyrenees, NE Spain, the French Corbières, and off the coast of NW Spain; and the Ormonde Seamount of the Gorringe Bank off the SW coast of Portugal. Most of these occurrences have been dated isotopically or from field evidence as Late Cretaceous. Geological and petrological details of the various occurrences are compiled and reviewed. Primary basanitic magmas were probably parental to the entire Province, and generated syenitic magmas by differentiation processes; oversaturated rocks were produced by alkali loss and perhaps also by crustal involvement. The Iberian Province is related to the opening of the N. Atlantic, specifically that of the Bay of Biscay.

Geological setting, emplacement mechanism and igneous evolution of the Atchiza mafic-ultramafic layered suite in north-west Mozambique

Science.gov (United States)

Ibraimo, Daniel Luis; Larsen, Rune B.

2015-11-01

The Atchiza mafic and ultramafic-layered suite (hereafter, "Atchiza Suite) crops out in an area 330 km2 west of the Mozambican Tete province. In an early account of the geology of this intrusion, it was considered the continuation of the Great Dyke of Zimbabwe, an idea that was aborted after detailed studies. Nevertheless, the Ni concentrations in the Atchiza outcrop rocks are considerable. Our investigation used field evidence, hand specimens and petrography descriptions, mineral chemistry studies using electron microprobe analysis and tectonic analysis to arrive at a plausible mineralogical composition and understanding of the tectonic setting for the igneous evolution. The mineral composition from the Atchiza Suite indicates that these are cumulates. The magmatic segregation from the petrographic and mineral composition reasoning indicates that dunite-lherzolitic peridotite-olivine gabbro-gabbronorite-gabbro-pegmatitic gabbro is the rock formation sequence. Olivine and chromite were the first phases formed, followed by pyroxene and plagioclase. In addition, it is shown that these minerals are near-liquidus crystallization products of basaltic magma with olivine Fo: 87.06 in dunite, mean values of clinopyroxene are (Wo: 36.4, En: 48.0, Fs: 15.2), orthopyroxene (Wo: 2.95, En: 73.0, Fs: 24.2) and plagioclase An: 71.3, respectively. Opaque minerals comprise Fe-Ti oxides and (Fe, Cr) spinel up to 4.8 vol.%, but chromitite layers are not present. Most of the opaque minerals are interstitial to pyroxene. Sulphides are common in gabbros, with pyrrhotite, pentlandite, chalcopyrite, pyrite and covellite together comprising 0.4-2.0 vol.%. The whole rock Rare Earth Element (REE) concentrations are mainly a result of differentiation, but slight crustal contamination/assimilation contributed to the REE contents. In addition, they also show Eu enrichment, suggesting that plagioclase fractionation was important in the rock. The Atchiza Suite preserves a deep-seated plumbing

Miscellaneous investigations series: Bedrock geologic map of the Lone Mountain pluton area, Esmeralda County, Nevada

International Nuclear Information System (INIS)

Maldonado, F.

1984-01-01

The joint attitudes were measured in the field and plotted on aerial photos at a scale of 1:24,000. The pluton is intensely jointed, primarily as a result of cooling and movement of the magma within a northwest-trending stress field. Foliation, in general, is poorly developed, and quality varies from area to area, but it is best developed close to the contacts with the metasedimentary rocks. A prominent northwest foliation direction was observed that parallels the northwest elongation of the exposed pluton. Faults in the pluton are difficult to identify because of the homogeneity of the rock. Several faults were mapped in the northern part of the area where they have a northeast trend and intersect the northwest-trending lamprophyre dikes with little apparent displacement. A major fault that bounds the northern part of the pluton is downthrown to the north and strikes northeast. This fault offsets the alluvium, the metasedimentary rocks, and the pluton and forms fault scraps as high as 10 m. Aeromagnetic data (US Geological Survey, 1979) suggest the following: (1) the local magnetic highs in the central part of the Lone Mountain pluton are probably related to topographic highs (peaks) where the flight lines are closer to the pluton; (2) a magnetic low in the northeastern part of Lone Mountain coincides with the pluton-country rock contact, which may be very steep; (3) the contours for the southwestern part of the mapped area indicate that the pluton-country rock contact is not as steep as that in the northeastern part and that the pluton probably coalesces at depth with the Weepah pluton, a pluton exposed south of the mapped area; and (4) the contours for the area of the Lone Mountain pluton express a northwest-trending gradient that parallels the northwest elongation of the Lone Mountain pluton and the northwest-trending stress field. 10 refs

Arrested diatreme development: Standing Rocks East, Hopi Buttes, Navajo Nation, USA

Science.gov (United States)

Lefebvre, Nathalie S.; White, James D. L.; Kjarsgaard, Bruce A.

2016-01-01

Maar-diatreme volcanoes, defined by their relatively large pyroclastic debris-filled subsurface structures and craters that cut into the pre-eruptive land surface, are typically found in small-volume mafic to ultramafic monogenetic volcanic fields. Diatremes are associated with strong explosions throughout most of their development, focused along feeder dikes and generally attributed to magma-water interaction, or high magmatic volatiles. Detailed mapping of the magnificently exposed Standing Rocks East (SRE) diatreme shows evidence of additional eruptive complexity, and offers new insights into how the plumbing and vent structures of small-volume volcanoes evolve during an eruption. SRE is part of a larger, basanitic volcanic complex that includes several diatremes formed along a series of irregular, offset NW-SE trending dikes exposed 300 m below the pre-eruptive land surface. Its similarly oriented elliptical-shaped diatreme structure comprises predominantly country rock lithic-rich breccia of coarse inhomogeneously mixed wall-rock blocks sourced from above and below the current surface, plus sparse juvenile material. Domains of pyroclastic deposits crosscut the country rock breccia deposits, and the best exposed is the NW massif rising 35 m above the current erosional surface. It represents a cross-section of an evolving crater floor, and comprises matrix-rich lapilli tuff and spatter deposits cut by irregularly distributed dikes, some with very complex textures. The most significant deposit, in terms of volume, is an unbedded lapilli tuff that is poorly sorted and has a well-mixed population of wall-rock and juvenile clast varieties, thus resembling deposits typical of diatremes. It is overlain by and locally intercalated with spatter deposits, and this irregular contact demarcates the base of what was during eruption an uneven, evolving crater floor. The generally massive, variably welded spatter deposits constitute mostly lapilli-sized juvenile clasts with

Magmatism and fenitization in the Cretaceous potassium-alkaline-carbonatitic complex of Ipanema São Paulo State, Brazil

Science.gov (United States)

Guarino, Vincenza; Azzone, Rogério Guitarrari; Brotzu, Pietro; de Barros Gomes, Celso; Melluso, Leone; Morbidelli, Lucio; Ruberti, Excelso; Tassinari, Colombo Celso Gaeta; Brilli, Mauro

2012-01-01

The Ipanema alkaline-carbonatitic complex is part of the Meso-Cenozoic alkaline magmatism located within the southeastern part of the Brazilian Platform. Drill-core and field sampling have indicated the occurrence of glimmerites, with subordinate shonkinites (mela-syenites), clinopyroxene-bearing glimmerites, diorites and syenites. The glimmerites are cross-cut by lamprophyric dykes and calciocarbonatites. Fenitization has deeply affected the country rocks, originating dioritic and syenitic rocks. The Ipanema rocks show a distinct potassic affinity. The initial Sr-Nd- isotopic composition of the Ipanema rocks (87Sr/86Sr = 0.70661-0.70754 and 143Nd/144Nd = 0.51169-0.51181) is similar to that of tholeiitic and potassium-rich-alkaline rocks of the Eastern Paraguay. Stable isotope data for the Ipanema calciocarbonatite suggest interaction with fluids at temperatures typical of hydrothermal stages, as hypothesized for other carbonatite complexes from southeastern Brazil. The chemical differences between the lamprophyre, glimmerites, carbonatites, apatitites and magnetitites, and the absence of marked REE enrichment in the evolved lithologies, all indicate that fractional crystallization and accumulus of liquidus phases in a magma reservoir, likely coupled with liquid immiscibility processes, may have played an important role in the genesis of the Ipanema rocks.

Water - rock interaction in different rock environments

International Nuclear Information System (INIS)

Lamminen, S.

1995-01-01

The study assesses the groundwater geochemistry and geological environment of 44 study sites for radioactive waste disposal. Initially, the study sites were divided by rock type into 5 groups: (1) acid - intermediate rocks, (2) mafic - ultramafic rocks, (3) gabbros, amphibolites and gneisses that contain calc-silicate (skarn) rocks, (4) carbonates and (5) sandstones. Separate assessments are made of acid - intermediate plutonic rocks and of a subgroup that comprises migmatites, granite and mica gneiss. These all belong to the group of acid - intermediate rocks. Within the mafic -ultramafic rock group, a subgroup that comprises mafic - ultramafic plutonic rocks, serpentinites, mafic - ultramafic volcanic rocks and volcanic - sedimentary schists is also evaluated separately. Bedrock groundwaters are classified by their concentration of total dissolved solids as fresh, brackish, saline, strongly saline and brine-class groundwaters. (75 refs., 24 figs., 3 tabs.)

Development of method for evaluating estimated inundation area by using river flood analysis based on multiple flood scenarios

Science.gov (United States)

Ono, T.; Takahashi, T.

2017-12-01

Non-structural mitigation measures such as flood hazard map based on estimated inundation area have been more important because heavy rains exceeding the design rainfall frequently occur in recent years. However, conventional method may lead to an underestimation of the area because assumed locations of dike breach in river flood analysis are limited to the cases exceeding the high-water level. The objective of this study is to consider the uncertainty of estimated inundation area with difference of the location of dike breach in river flood analysis. This study proposed multiple flood scenarios which can set automatically multiple locations of dike breach in river flood analysis. The major premise of adopting this method is not to be able to predict the location of dike breach correctly. The proposed method utilized interval of dike breach which is distance of dike breaches placed next to each other. That is, multiple locations of dike breach were set every interval of dike breach. The 2D shallow water equations was adopted as the governing equation of river flood analysis, and the leap-frog scheme with staggered grid was used. The river flood analysis was verified by applying for the 2015 Kinugawa river flooding, and the proposed multiple flood scenarios was applied for the Akutagawa river in Takatsuki city. As the result of computation in the Akutagawa river, a comparison with each computed maximum inundation depth of dike breaches placed next to each other proved that the proposed method enabled to prevent underestimation of estimated inundation area. Further, the analyses on spatial distribution of inundation class and maximum inundation depth in each of the measurement points also proved that the optimum interval of dike breach which can evaluate the maximum inundation area using the minimum assumed locations of dike breach. In brief, this study found the optimum interval of dike breach in the Akutagawa river, which enabled estimated maximum inundation area

Magmatic controls on axial relief and faulting at mid-ocean ridges

Science.gov (United States)

Liu, Zhonglan; Buck, W. Roger

2018-06-01

Previous models do not simultaneously reproduce the observed range of axial relief and fault patterns at plate spreading centers. We suggest that this failure is due to the approximation that magmatic dikes open continuously rather than in discrete events. During short - lived events, dikes open not only in the strong axial lithosphere but also some distance into the underlying weaker asthenosphere. Axial valley relief affects the partitioning of magma between the lithosphere and asthenosphere during diking events. The deeper the valley, the more magma goes into lithospheric dikes in each event and so the greater the average opening rate of those dikes. The long-term rate of lithospheric dike opening controls faulting rate and axial depth. The feedback between axial valley depth D and lithospheric dike opening rate allows us to analytically relate steady-state values of D to lithospheric thickness HL and crustal thickness HC. A two-dimensional model numerical model with a fixed axial lithospheric structure illustrates the analytic model implications for axial faulting. The predictions of this new model are broadly consistent with global and segment-scale trends of axial depth and fault patterns with HL and HC.

Origin of spinel lamella and/or inclusions in olivine of harzburgite form the Pauza ultramafic rocks from the Kurdistan region, northeastern Iraq

Science.gov (United States)

Mohammad, Y.; Maekawa, H.; Karim, K.

2009-04-01

Exsolution lamellae and octahedral inclusions of chromian spinel occur in olivine of harzburgite of the Pauza ultramafic rocks, Kurdistan region, northeastern Iraq. The lamella is up to 80μm long and up to 50 μm wide. The lamellae and octahedral inclusions of chromian spinel are distributed heterogeneously in the host olivine crystal. They are depleted in Al2O3 relative to the subhedral spinel grains in the matrix and spinel lamella in orthopyroxene. Olivine (Fo92 - 93) with spinel lamellae occurs as fine-grained crystals around orthopyroxene, whereas olivine (Fo90-91) free from spinel is found in matrix. Based on back-scattered images analyses, enrichments of both Cr # and Fe+3 in the chromian spinel lamella in olivine (replacive olivine) relative to that in adjacent orthopyroxene. As well as the compositions of chromian spinel lamellae host olivine are more Mg-rich than the matrix olivine. Furthermore the restriction of olivine with spinel lamellae and octahedral inclusions on around orthopyroxene, and the similarity of spinel lamella orientations in both olivine and adjacent orthopyroxene. This study concludes that the spinel inclusions in olivine are remnant (inherited from former orthopyroxene) spinel exsolution lamella in orthopyroxene, that has been formed in upper mantle conditions ( T = 1200 °C, P = 2.5 GPa ). Replacive olivine are formed by reaction of ascending silica poor melt and orthopyroxene in harzburgite as pressure decrease the solubility of silica-rich phase (orthopyroxene) in the system increase, therefore ascending melt dissolve pyroxene with spinel exsolution lamella and precipitate replacive olivine with spinel inclusions. We can conclude that the olivines with spinel lamella are not necessary to be original and presenting ultrahigh-pressure and/or ultra deep-mantle conditions as previously concluded. It has been formed by melting of orthopyroxene (orthopyroxene with spinel exsolution lamella = olivine with spinel lamellae and octahedral

Complete preservation of ophiolite suite from south Andaman, India ...

Indian Academy of Sciences (India)

ately high specific gravity; serpentinization within this ultramafic cumulate occurs along number of fracture planes. This type of multi-directional fractures form mesh-like structures. Petrographi- cally the ultramafic cumulates are represented by olivine clinopyroxenites and these are composed of clinopyroxene, olivine and ...

Study of the mining possibilities in the surroundings of Mahoma - Guaycuru phase I Feasibility of the mafic body of Mahoma-Guaycuru and of the complex mafic - Stratified ultramafic of the Cerros Negros and San Jose and Colonia provinces

International Nuclear Information System (INIS)

Coronel, N.; Techera, J.; Ramos, E.; Pineyro, G.

1990-01-01

In Mahoma - Guaycuru area has been carried out regional cartography to place the geologic context, mainly the Mahoma bodies magmatic intrusive s, Guaycuru and Cerros Negros. The area has good mining possibilities due to their geologic environment. They exist also geochemical anomalies in the area that they should be taken as base for future works in the same one. In this environment studies were begun with the bodies magmatic mafic and ultramafic, due to its feasibility in Platino ides, Chromium, Nickel, Cobalt . It intent to adjust in a following stage (it Leaves II) a work methodology in an occurrence of minerals metallic. for future works,la occurrence of metallic minerals it lacks elements of economic interest in concentrations high, just as it demonstrates it the geochemical of rocks carried out, and the lack of anomalies in the geochemical of active silts and of floors. As element of interest single Gold appears in samples alluvial deposits but their source would not be the mafic rocks. Other occurrence of metallic minerals appears

victor e. dike

African Journals Online (AJOL)

NESG PUBLICATIONS

FAILED VISIONS AND ECONOMIC TRANSFORMATION: CAN NIGERIA ... improve the living conditions of the people. The major ..... supports high economic performance. In conclusion, for the economy to move beyond its present stage.

40Ar/39Ar geochronology of the El Teniente porphyry copper deposit

International Nuclear Information System (INIS)

Maksaev, V; Munizaga, F; McWilliams, M; Thiele, K; Arevalo, A; Zuniga, P; Floody, R

2001-01-01

Chile's El Teniente deposit is the largest known porphyry Cu-Mo orebody (>70 Mt Cu ), and is genetically related to Late Miocene-Early Pliocene igneous activity on the western slopes of the Andean Cordillera (cf. Howell and Molloy, 1960, Camus, 1975, Cuadra, 1986, Skewes and Stern, 1995). The deposit is 2700 m long by 1000 to 1700 m wide and is elongated in a N-S direction, with a recognized vertical extent of about 1800 m. Approximately 80% of the copper at El Teniente is distributed within a stockwork of mineralized veinlets and minor hydrothermal breccias within pervasively altered andesites, basalts and gabbros that are part of the Upper Miocene country rocks. Two intrusive bodies occur within the deposit, the Sewell Diorite (actually a tonalite) in the southeast part of the orebody and the dacitic Teniente Porphyry in its northern part. The Teniente Porphyry occurs as a north-south trending dike 1500 m long and 200 m wide. Minor quartz-diorite or tonalite intrusions known as the Central Diorite and the Northern Diorite occur along the eastern side of the deposit. Hydrothermal breccias commonly occur along the contacts of intrusive bodies with the country rocks. The Braden Breccia is a conspicuous diatreme in the center of the deposit that forms a pipe 1200 m in diameter at the surface, narrowing to 600 m at a depth of 1800 m. The Braden diatreme pipe is poorly mineralized (∼0.3% Cu), but it is surrounded by the copper-rich Marginal Breccia, a discontinuous rim of tourmaline-matrix hydrothermal breccia. Latite dikes intrude El Teniente, some forming altered ring dikes that encircle the Braden breccia pipe. After mineralization had ceased, the southern section of the deposit was cut by a 3.8 ± 0.3 Ma lamprophyre dyke, marking the end of igneous activity (Cuadra, 1986). Biotite-dominated K-silicate alteration is widespread within the orebody. In contrast, pervasive phyllic alteration is restricted to 'diorite' intrusions, and to the Braden and Marginal

Tidal current and tidal energy changes imposed by a dynamic tidal power system in the Taiwan Strait, China

Science.gov (United States)

Dai, Peng; Zhang, Jisheng; Zheng, Jinhai

2017-12-01

The Taiwan Strait has recently been proposed as a promising site for dynamic tidal power systems because of its shallow depth and strong tides. Dynamic tidal power is a new concept for extracting tidal potential energy in which a coast-perpendicular dike is used to create water head and generate electricity via turbines inserted in the dike. Before starting such a project, the potential power output and hydrodynamic impacts of the dike must be assessed. In this study, a two-dimensional numerical model based on the Delft3D-FLOW module is established to simulate tides in China. A dike module is developed to account for turbine processes and estimate power output by integrating a special algorithm into the model. The domain decomposition technique is used to divide the computational zone into two subdomains with grid refinement near the dike. The hydrodynamic processes predicted by the model, both with and without the proposed construction, are examined in detail, including tidal currents and tidal energy flux. The predicted time-averaged power yields with various opening ratios are presented. The results show that time-averaged power yield peaks at an 8% opening ratio. For semidiurnal tides, the flow velocity increases in front of the head of the dike and decreases on either side. For diurnal tides, these changes are complicated by the oblique incidence of tidal currents with respect to the dike as well as by bathymetric features. The dike itself blocks the propagation of tidal energy flux.

Paleomagnetic evidence bearing on Tertiary tectonics of the Tihamat Asir coastal plain, southwestern Saudi Arabia

Science.gov (United States)

Kellogg, K.S.; Blank, H.R.

1982-01-01

Paleomagnetic directions determined for an upper Oligocene to lower Miocene dike swarm and from two lower Miocene layered gabbros in the Tihamat Asir coastal plain of southwestern Saudi Arabia are used to test several hypotheses concerning the tectonics of rifting along the eastern margin of the Red Sea. The dikes and gabbros were emplaced during the initial phases of Red Sea rifting and may mark the transition between continental and oceanic crust. Although these rocks have been hydrothermally altered to varying degrees, reliable remanent directions after alternating-field demagnetization were obtained for 23 dikes and for gabbros at Jabal at Tirf and Wadi Liyyah. Twelve of the dikes are reversely magnetized. After the directions of the reversely magnetized dikes are inverted 180?, the mean direction calculated for the normal dikes is approximately 24? more downward than that calculated for the reversed dikes. This result is similar to that found for the As Sarat volcanic field, 100 km to the north, and may be due to a displaced dipole source for the field. The unrotated mean remanent direction for the dikes (inverting reversed dike directions 180?) is D (declination) = 353.2? and I (inclination) = 6.8? with a95 (radius of the cone of 95 percent confidence) = 8.9? whereas directions from the Jabal at Tirf and Wadi Liyyah gabbros lie at D = 176.2?, I = -1.6? (a95 = 7 1 ?) and D = 17.1?, I = 16.3? (a 95 = 8.7?), respectively. Comparing these results with the results from the As Sarat volcanic field, all the paleomagnetic evidence supports a model for approximately 20 ? of westward tilting of the Wadi Damad and Wadi Jizan areas after the emplacement of the Jabal at Tiff gabbro. The Wadi Liyyah area may have been tilted even more toward the Red Sea. The paleomagnetic directions from three widely separated localities in the Jabal at Tirf gabbro are not significantly different, a fact which indicates that the body cooled in approximately its present bowl shape. Evidence

Petrogenetic importance of Cr - spinel metaperidotite

International Nuclear Information System (INIS)

Snarska, B.

2010-01-01

The research is ultramafic body Komarovce the site, which represents the spinel metaperidotit. In recent works dealing with the problems of genesis and tectonic ultramafic rocks placement consideration, Cr - spinel, which is considered an important petrogenetic indicator. Based on its chemical composition can further characterize the origin of peridotite.

Laboratory investigations of the effects of nitrification-induced acidification on Cr cycling in vadose zone material partially derived from ultramafic rocks

Science.gov (United States)

Mills, Christopher T.; Goldhaber, Martin B.

2012-01-01

Sacramento Valley (California, USA) soils and sediments have high concentrations of Cr(III) because they are partially derived from ultramafic material. Some Cr(III) is oxidized to more toxic and mobile Cr(VI) by soil Mn oxides. Valley soils typically have neutral to alkaline pH at which Cr(III) is highly immobile. Much of the valley is under cultivation and is both fertilized and irrigated. A series of laboratory incubation experiments were conducted to assess how cultivation might impact Cr cycling in shallow vadose zone material from the valley. The first experiments employed low (7.1 mmol N per kg soil) and high (35 mmol N kg− 1) concentrations of applied (NH4)2SO4. Initially, Cr(VI) concentrations were up to 45 and 60% greater than controls in low and high incubations, respectively. After microbially-mediated oxidation of all NH4+, Cr(VI) concentrations dropped below control values. Increased nitrifying bacterial populations (estimated by measurement of phospholipid fatty acids) may have increased the Cr(VI) reduction capacity of the vadose zone material resulting in the observed decreases in Cr(VI). Another series of incubations employed vadose zone material from a different location to which low (45 meq kg− 1) and high (128 meq kg− 1) amounts of NH4Cl, KCl, and CaCl2 were applied. All treatments, except high concentration KCl, resulted in mean soil Cr(VI) concentrations that were greater than the control. High concentrations of water-leachable Ba2 + (mean 38 μmol kg− 1) in this treatment may have limited Cr(VI) solubility. A final set of incubations were amended with low (7.1 mmol N kg− 1) and high (35 mmol N kg− 1) concentrations of commercial liquid ammonium polyphosphate (APP) fertilizer which contained high concentrations of Cr(III). Soil Cr(VI) in the low APP incubations increased to a concentration of 1.8 μmol kg− 1 (5 × control) over 109 days suggesting that Cr(III) added with the APP fertilizer was more

experimental investigation of flow pattern around repelling and ...

African Journals Online (AJOL)

A. Mahdieh NajafAbadi and M. M. Bateni

2017-09-01

Sep 1, 2017 ... ABSTRACT. Use of T-head spur dikes is one of the common methods to control erosion of riverbanks. Nevertheless, setting spur dikes in the flow direction leads to modification of flow path and local scour in the site of the spur dike. In case of intensification, this can destruct the structure and the riverbank.

Elastic source model of the North Mono eruption (1325-1368 A.D.) based on shoreline deformation

Science.gov (United States)

Shaffer, Wil; Bursik, Marcus; Renshaw, Carl

2010-12-01

Topographic data from the Shuttle Radar Topography Mission (SRTM) captures the permanent deformation of a prominent highstand of Mono Lake, California USA. Deformation of the Dechambeau Ranch highstand shoreline was measured using the elevation of the beach berm—shoreline bluff break-in-slope. Point source models and a boundary element dike model were used to approximate the source of deformation underneath the northern end of the Mono Craters. The point source model could not adequately explain the observed deformation. The dike model yielded the best results for a NW trending dike dipping 60° NE and inflated to widths greater than 60 m. The results suggest that the geometry of the source is more complex than a simple vertical dike and that the deformation is better explained with a dipping dike following a normal fault, or an elongated cryptodome.

Petrographic, geochemical and isotopic evidence of crustal assimilation processes in the Ponte Nova alkaline mafic-ultramafic massif, SE Brazil

Science.gov (United States)

Azzone, Rogério Guitarrari; Montecinos Munoz, Patricio; Enrich, Gaston Eduardo Rojas; Alves, Adriana; Ruberti, Excelso; Gomes, Celsode Barros

2016-09-01

Crustal assimilation plus crystal fractionation processes of different basanite magma batches control the evolution of the Ponte Nova cretaceous alkaline mafic-ultramafic massif in SE Brazil. This massif is composed of several intrusions, the main ones with a cumulate character. Disequilibrium features in the early-crystallized phases (e.g., corrosion and sieve textures in cores of clinopyroxene crystals, spongy-cellular-textured plagioclase crystals, gulf corrosion texture in olivine crystals) and classical hybridization textures (e.g., blade biotite and acicular apatite crystals) provide strong evidence of open-system behavior. All samples are olivine- and nepheline-normative rocks with basic-ultrabasic and potassic characters and variable incompatible element enrichments. The wide ranges of whole-rock 87Sr/86Sri and 143Nd/144Ndi ratios (0.70432-0.70641 and 0.512216-0.512555, respectively) are indicative of crustal contribution from the Precambrian basement host rocks. Plagioclase and apatite 87Sr/86Sr ratios (0.70422-0.70927) obtained for the most primitive samples of each intrusion indicate disequilibrium conditions from early- to principal-crystallization stages. Isotope mixing-model curves between the least contaminated alkaline basic magma and heterogeneous local crustal components indicate that each intrusion of the massif is differentiated from the others by varied degrees of crustal contribution. The primary mechanisms of crustal contribution to the Ponte Nova massif involve the assimilation of host rock xenoliths during the development of the chamber environment and the assimilation of partial melts from the surrounding host rocks. Thermodynamic models using the melts algorithm indicate that parental alkaline basic magmas can be strongly affected by contamination processes subsequently to their initial stages of crystallization when there is sufficient energy to assimilate partial melts of crustal host rocks. The assimilation processes are considered to

Oxidative release of chromium from Archean ultramafic rocks, its transport and environmental impact – A Cr isotope perspective on the Sukinda valley ore district (Orissa, India)

International Nuclear Information System (INIS)

Paulukat, Cora; Døssing, Lasse N.; Mondal, Sisir K.; Voegelin, Andrea R.; Frei, Robert

2015-01-01

Highlights: • Cr in lateritic soil profiles in Sukinda valley are partly highly negatively fractionated. • Oxidative weathering and mining operations affect the Cr isotope composition of the local surface water. • Isotopically heavy Cr from land is probably preserved during its transport to the sea. • The environmental impact of toxic Cr(VI) can potentially be diminished by microbial mats. - Abstract: This study investigates Cr isotope fractionation during soil formation from Archean (3.1–3.3 Ga) ultramafic rocks in a chromite mining area in the southern Singhbhum Craton (Orissa, India). The Cr-isotope signatures of two studied weathering profiles, range from non-fractionated mantle values to negatively fractionated values as low as δ 53 Cr = −1.29 ± 0.04‰. Local surface waters are isotopically heavy relative to the soils. This supports the hypothesis that during oxidative weathering isotopically heavy Cr(VI) is leached from the soils to runoff. The impact of mining pollution is observed downstream from the mine where surface water Cr concentrations are significantly increased, accompanied by a shift to less positive δ 53 Cr values relative to upstream unpolluted surface water. A microbial mat sample indicates that microbes have the potential to reduce and immobilize Cr(VI), which could be a factor in controlling the hazardous impact of Cr(VI) on health and environment. The positive Cr isotope signatures of the Brahmani estuary and coastal seawater collected from the Bay of Bengal further indicate that the positively fractionated Cr isotope signal from the catchment area is preserved during its transport to the sea. Isotopically lighter Cr(VI) downstream from the mine is probably back-reduced to Cr(III) during riverine transport leading to similar Cr-isotope values in the estuary as observed upstream from the mine

Oman Drilling Project GT3 site survey: dynamics at the roof of an oceanic magma chamber

Science.gov (United States)

France, L.; Nicollet, C.; Debret, B.; Lombard, M.; Berthod, C.; Ildefonse, B.; Koepke, J.

2017-12-01

Oman Drilling Project (OmanDP) aims at bringing new constraints on oceanic crust accretion and evolution by drilling Holes in the whole ophiolite section (mantle and crust). Among those, operations at GT3 in the Sumail massif drilled 400 m to sample the dike - gabbro transition that corresponds to the top (gabbros) and roof (dikes) of the axial magma chamber, an interface where hydrothermal and magmatic system interacts. Previous studies based on oceanic crust formed at present day fast-spreading ridges and preserved in ophiolites have highlighted that this interface is a dynamic horizon where the axial melt lens that top the main magma chamber can intrude, reheat, and partially assimilate previously hydrothermally altered roof rocks. Here we present the preliminary results obtained in GT3 area that have allowed the community to choose the drilling site. We provide a geological and structural map of the area, together with new petrographic and chemical constraints on the dynamics of the dike - gabbro transition. Our new results allow us to quantify the dynamic processes, and to propose that 1/ the intrusive contact of the varitextured gabbro within the dikes highlights the intrusion of the melt lens top in the dike rooting zone, 2/ both dikes and previously crystallized gabbros are reheated, and recrystallized by underlying melt lens dynamics (up to 1050°C, largely above the hydrous solidus temperature of altered dikes and gabbros), 3/ the reheating range can be > 200°C, 4/ the melt lens depth variations for a given ridge position is > 200m, 5/ the reheating stage and associated recrystallization within the dikes occurred under hydrous conditions, 6/ the reheating stage is recorded at the root zone of the sheeted dike complex by one of the highest stable conductive thermal gradient ever recorded on Earth ( 3°C/m), 7/ local chemical variations in recrystallized dikes and gabbros are highlighted and used to quantify crystallization and anatectic processes, and the

The Relation Between Plate Spreading Rate, Crustal Thickness and Axial Relief at Mid-Ocean Ridges

Science.gov (United States)

Liu, Z.; Buck, W. R.

2017-12-01

Variations in axial valley relief and in faulting at plate spreading centers are clearly related to magma supply and axial lithospheric structure. Previous models that consider the interaction of magmatic dikes with lithospheric stretching do not successfully reproduce both of these trends. We present the first model that reproduces these trends by making simple assumptions about the partitioning of magma between dikes, gabbros and extrusives. A key concept is that dikes open not only in the brittle axial lithosphere but also into the underlying ductile crust, where they cool to form gabbro. The amount of gabbro so intruded depends on magma pressure that is related to axial relief. The deeper the valley the less magma goes into gabbros and the more magma is available for dikes to accommodate plate separation. We define the fraction of plate separation rate accommodated by dikes as M. If Mreasonable. Finally, we describe themo-mechanical models that allow us to relate plate spreading rate and crustal thickness and to axial valley depth.

History of dams at the Department of Energy's Savannah River Site, Aiken, South Carolina

International Nuclear Information System (INIS)

Jones, M.P.; Wilson, C.B.

1995-01-01

Since the production of nuclear material at SRS for weapons required large quantities of cooling water, a series of canals, dikes, and dams were constructed to provide conveyance systems and reservoirs. This paper presents a brief overview of the history of the construction of the dams and dikes. Attention is given to the use of asphaltic concrete for 30 years (and its maintenance and repair) to line the banks of dikes and the upstream slopes of dams to prevent erosion and possible failure. The ability of asphaltic concrete in preventing dam/dike failure was proven. Benefits and drawbacks to the use of this material are discussed based on the extensive experience at SRS

Fault and graben growth along active magmatic divergent plate boundaries in Iceland and Ethiopia

KAUST Repository

Trippanera, D.; Acocella, V.; Ruch, Joel; Abebe, B.

2015-01-01

Recent studies highlight the importance of annual-scale dike-induced rifting episodes in developing normal faults and graben along the active axis of magmatic divergent plate boundaries (MDPB). However, the longer-term (102-105 years) role of diking on the cumulative surface deformation and evolution of MDPB is not yet well understood. To better understand the longer-term normal faults and graben along the axis of MDPB, we analyze fissure swarms in Iceland and Ethiopia. We first focus on the simplest case of immature fissure swarms, with single dike-fed eruptive fissures; these consist of a <1 km wide graben bordered by normal faults with displacement up to a few meters, consistent with theoretical models and geodetic data. A similar structural pattern is found, with asymmetric and multiple graben, within wider mature fissure swarms, formed by several dike-fed eruptive fissures. We then consider the lateral termination of normal faults along these graben, to detect their upward or downward propagation. Most faults terminate as open fractures on flat surface, suggesting downward fault propagation; this is consistent with recent experiments showing dike-induced normal faults propagating downward from the surface. However, some normal faults also terminate as open fractures on monoclines, which resemble fault propagation folds; this suggests upward propagation of reactivated buried faults, promoted by diking. These results suggest that fault growth and graben development, as well as the longer-term evolution of the axis of MDPB, may be explained only through dike emplacement and that any amagmatic faulting is not necessary.

Fault and graben growth along active magmatic divergent plate boundaries in Iceland and Ethiopia

KAUST Repository

Trippanera, D.

2015-10-08

Recent studies highlight the importance of annual-scale dike-induced rifting episodes in developing normal faults and graben along the active axis of magmatic divergent plate boundaries (MDPB). However, the longer-term (102-105 years) role of diking on the cumulative surface deformation and evolution of MDPB is not yet well understood. To better understand the longer-term normal faults and graben along the axis of MDPB, we analyze fissure swarms in Iceland and Ethiopia. We first focus on the simplest case of immature fissure swarms, with single dike-fed eruptive fissures; these consist of a <1 km wide graben bordered by normal faults with displacement up to a few meters, consistent with theoretical models and geodetic data. A similar structural pattern is found, with asymmetric and multiple graben, within wider mature fissure swarms, formed by several dike-fed eruptive fissures. We then consider the lateral termination of normal faults along these graben, to detect their upward or downward propagation. Most faults terminate as open fractures on flat surface, suggesting downward fault propagation; this is consistent with recent experiments showing dike-induced normal faults propagating downward from the surface. However, some normal faults also terminate as open fractures on monoclines, which resemble fault propagation folds; this suggests upward propagation of reactivated buried faults, promoted by diking. These results suggest that fault growth and graben development, as well as the longer-term evolution of the axis of MDPB, may be explained only through dike emplacement and that any amagmatic faulting is not necessary.

The conjunction of factors that lead to formation of giant gold provinces and deposits in non-arc settings

Science.gov (United States)

Groves, David I.; Goldfarb, Richard J.; Santosh, M.

2016-01-01

It is quite evident that it is not anomalous metal transport, nor unique depositional conditions, nor any single factor at the deposit scale, that dictates whether a mineral deposit becomes a giant or not. A hierarchical approach thus is required to progressively examine controlling parameters at successively decreasing scales in the total mineral system to understand the location of giant gold deposits in non-arc environments. For giant orogenic, intrusion-related gold systems (IRGS) and Carlin-type gold deposits and iron oxide-copper-gold (IOCG) deposits, there are common factors among all of these at the lithospheric to crustal scale. All are sited in giant gold provinces controlled by complex fundamental fault or shear zones that follow craton margins or, in the case of most Phanerozoic orogenic giants, define the primary suture zones between tectonic terranes. Giant provinces of IRGS, IOCG, and Carlin-type deposits require melting of metasomatized lithosphere beneath craton margins with ascent of hybrid lamprophyric to granitic magmas and associated heat flux to generate the giant province. The IRGS and IOCG deposits require direct exsolution of volatile-rich magmatic-hydrothermal fluids, whereas the association of such melts with Carlin-type ores is more indirect and enigmatic. Giant orogenic gold provinces show no direct relationship to such magmatism, forming from metamorphic fluids, but show an indirect relationship to lamprophyres that reflect the mantle connectivity of controlling first-order structures.

Rock Magnetic Study of IODP/ICDP Expedition 364 Site M0077A Drill Cores: Post-Impact Sediments, Impact Breccias, Melt, Granitic Basement and Dikes

Science.gov (United States)

Fucugauchi, J. U.; Perez-Cruz, L. L.; Rebolledo-Vieyra, M.; Tikoo, S.; Zylberman, W.; Lofi, J.

2017-12-01

Drilling at Site M0077 sampled post-impact sediments overlying a peak ring consisting of impact breccias, melt rock and granitoids. Here we focus on characterizing the peak ring using magnetic properties, which vary widely and depend on mineralogy, depositional and emplacement conditions and secondary alterations. Rock magnetic properties are integrated with Multi-Sensor Core Logger (MSCL) data, vertical seismic profile, physical properties, petrographic and chemical analyses and geophysical models. We measure low-field magnetic susceptibility at low- and high-frequencies, intensity and direction of natural remanent magnetization (NRM) and laboratory-induced isothermal (IRM) and anhysteretic (ARM) magnetizations, alternating-field demagnetization of NRM, IRM and NRM, susceptibility variation with temperature, anisotropy of magnetic susceptibility, hysteresis and IRM back-field demagnetization. Post-impact carbonates show low susceptibilities and NRM intensities, variable frequency-dependent susceptibilities and multivectorial remanences residing in low and high coercivity minerals. Hysteresis loops show low coercivity saturation magnetizations and variable paramagnetic mineral contents. Impact breccias (suevites) and melt rock show higher susceptibilities, low frequency-dependent susceptibilities, high NRM, ARM and IRM intensities and moderate ARM intensity/susceptibility ratios. Magnetic signal is dominated by fine-grained magnetite and titanomagnetites with PSD domain states. Melt rocks at the base of impactite section show the highest susceptibilities and remanence intensities. Basement section is characterized by low susceptibilities in the granites and higher values in the dikes, with NRM and ARM intensities increasing towards the base. The high susceptibilities and remanence intensities correlate with high seismic velocities, density and decreased porosity and electrical resistivity. Fracturing and alteration account for the reduced seismic velocities

Rb-Sr geochronology and geochemical characteristics of mafic dikes in the Nova Lacerda and Conquista D'Oeste region, Mato Grosso, SW Amazonian Craton; Geocronologia Rb-Sr e caracteristicas geoquimicas dos diques maficos da regiao de Nova Lacerda e Conquista D'Oeste (MT), porcao sudoeste do Craton Amazonico

Energy Technology Data Exchange (ETDEWEB)

Costa, Paulo Cesar Correa da; Matos, Joao Batista de [Universidade Federal de Mato Grosso (UFMT), Cuiaba, MT (Brazil). Dept. de Recursos Minerais; Grupo de Pesquisas em Evolucao Crustal e Metalogenia Guapore, Cuiaba, MT (Brazil)], e-mail: pccorrea@ufmt.br, e-mail: jmatos@cpd.ufmt.br; Girardi, Vicente Antonio Vitorio [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Geociencias. Dept. de Mineralogia e Geotectonica], e-mail: girardi@usp.br; Ruiz, Amarildo Salina [Universidade Federal de Mato Grosso (UFMT), Cuiaba, MT (Brazil). Dept. de Geologia Geral; Grupo de Pesquisas em Evolucao Crustal e Metalogenia Guapore, Cuiaba, MT (Brazil)], e-mail: asruiz@rc.unesp.br

2009-07-01

In the Nova Lacerda and Conquista D'Oeste regions, Mato Grosso State, SW part of the Amazonian Craton, mafic dikes trending NNW intrude the Nova Lacerda Granite (1462{+-}12 Ma), within the Jauru Domain, in the Rondonia-San Ignacio Province (1.55 - 1.3 Ga). The mafic swarm comprises diabases, metadiabases and amphibolites. Metadiabases originated from uralitization of diabases. These rocks have tholeiitic affinity and predominant basaltic composition. Some samples are andesi-basalts. The ages of diabases and metabasites are 1380 {+-} 32 Ma and 1330 {+-} 120 Ma respectively. Geochemical data indicate that the compositional variation of diabases and metadiadases is due to fractional crystallization of evolved tholeiitic magmas. The origin of the basaltic magmas is related to a heterogeneous mantle source. (author)

The Influence of Baker Bay and Sand Island on Circulations in the Mouth of the Columbia River

Science.gov (United States)

2014-06-01

Island is a good example of a dredge spoils area protected by a pile dike system. Without the stabilizing effect of the Sand Island pile dikes, the...Sand Island) and pile dikes, and the effects of these features on adjacent water masses in the lower Columbia River. 4 THIS PAGE INTENTIONALLY...each drifter using Velcro and nylon straps with pinch buckles. Each case contained a 1-Hz sampling internally-logging GT-31 handheld GPS unit for

Chromitites of the Akkarginskiy massif (the Southern Urals

Directory of Open Access Journals (Sweden)

D. E. Saveliev

2018-03-01

Full Text Available We consider the geological features of ultramafic rock and chrome ore deposits. It is shown that all studied deposits are podiform in morphology that is typical for the ophiolite ultramafic rocks. Morphological and chemical features of the accessory and oreforming spinels are described. Accessory chrome spinels from ultramafic rocks are middle-Cr and high-Cr in chemistry (>42% Cr2O3. All studied ore-forming chrome spinels from deposits in the Main Ore Zone are high-Cr (54–63% Cr2O3. Some middle-Cr oreforming spinels were found in deposit of the East Ore Zone (48% Cr2O3. We adduce a proof of the tectonic origin of present-day structure of the Akkarginskiy massif and its chrome ore deposits.

The Pobei Cu-Ni and Fe ore deposits in NW China are comagmatic evolution products: evidence from ore microscopy, zircon U-Pb chronology and geochemistry

Energy Technology Data Exchange (ETDEWEB)

Liu, G.I.; Li, W.Y.; Lu, X.B.; Huo, Y.H.; Zhang, B.

2017-11-01

The Pobei mafic-ultramafic complex in northwestern China comprises magmatic Cu-Ni sulfide ore deposits coexisting with Fe-Ti oxide deposits. The Poshi, Poyi, and Podong ultramafic intrusions host the Cu-Ni ore. The ultramafic intrusions experienced four stages during its formation. The intrusion sequence was as follows: dunite, hornblende-peridotite, wehrlite and pyroxenite. The wall rock of the ultramafic intrusions is the gabbro intrusion in the southwestern of the Pobei complex. The Xiaochangshan magmatic deposit outcrops in the magnetitemineralized gabbro in the northeastern part of the Pobei complex. The main emplacement events related to the mineralization in the Pobei complex, are the magnetite-mineralized gabbro related to the Xiaochangshan Fe deposit, the gabbro intrusion associated to the Poyi, Poshi and Podong Cu-Ni deposits, and the ultramafic intrusions that host Cu-Ni deposits (Poyi and Poshi). The U-Pb age of the magnetite-mineralized gabbro is 276±1.7Ma, which is similar to that of the Pobei mafic intrusions. The εHf(t) value of zircon in the magnetite-mineralized gabbro is almost the same as that of the gabbro around the Poyi and Poshi Cu-Ni deposits, indicating that the rocks related to Cu-Ni and magnetite deposits probably originated from the same parental magma. There is a trend of crystallization differentiation evolution in the Harker diagram from the dunite in the Cu-Ni deposit to the magnetite-mineralized gabbro. The monosulfide solid solution fractional crystallization was weak in Pobei; thus, the Pd/Ir values were only influenced by the crystallization of silicate minerals. The more complete the magma evolution is, the greater is the Pd/Ir ratio. The Pd/Ir values of dunite, the lithofacies containing sulfide (including hornblende peridotite, wehrlite, and pyroxenite) in the Poyi Cu-Ni deposit, magnetite-mineralized gabbro, and massive magnetite, are 8.55, 12.18, 12.26, and 18.14, respectively. Thus, the massive magnetite was probably the

The Pobei Cu-Ni and Fe ore deposits in NW China are comagmatic evolution products: evidence from ore microscopy, zircon U-Pb chronology and geochemistry

International Nuclear Information System (INIS)

Liu, G.I.; Li, W.Y.; Lu, X.B.; Huo, Y.H.; Zhang, B.

2017-01-01

The Pobei mafic-ultramafic complex in northwestern China comprises magmatic Cu-Ni sulfide ore deposits coexisting with Fe-Ti oxide deposits. The Poshi, Poyi, and Podong ultramafic intrusions host the Cu-Ni ore. The ultramafic intrusions experienced four stages during its formation. The intrusion sequence was as follows: dunite, hornblende-peridotite, wehrlite and pyroxenite. The wall rock of the ultramafic intrusions is the gabbro intrusion in the southwestern of the Pobei complex. The Xiaochangshan magmatic deposit outcrops in the magnetitemineralized gabbro in the northeastern part of the Pobei complex. The main emplacement events related to the mineralization in the Pobei complex, are the magnetite-mineralized gabbro related to the Xiaochangshan Fe deposit, the gabbro intrusion associated to the Poyi, Poshi and Podong Cu-Ni deposits, and the ultramafic intrusions that host Cu-Ni deposits (Poyi and Poshi). The U-Pb age of the magnetite-mineralized gabbro is 276±1.7Ma, which is similar to that of the Pobei mafic intrusions. The εHf(t) value of zircon in the magnetite-mineralized gabbro is almost the same as that of the gabbro around the Poyi and Poshi Cu-Ni deposits, indicating that the rocks related to Cu-Ni and magnetite deposits probably originated from the same parental magma. There is a trend of crystallization differentiation evolution in the Harker diagram from the dunite in the Cu-Ni deposit to the magnetite-mineralized gabbro. The monosulfide solid solution fractional crystallization was weak in Pobei; thus, the Pd/Ir values were only influenced by the crystallization of silicate minerals. The more complete the magma evolution is, the greater is the Pd/Ir ratio. The Pd/Ir values of dunite, the lithofacies containing sulfide (including hornblende peridotite, wehrlite, and pyroxenite) in the Poyi Cu-Ni deposit, magnetite-mineralized gabbro, and massive magnetite, are 8.55, 12.18, 12.26, and 18.14, respectively. Thus, the massive magnetite was probably the

Geology of the Integrated Disposal Facility Trench

International Nuclear Information System (INIS)

Reidel, Steve P.; Fecht, Karl R.

2005-01-01

This report describes the geology of the integrated Disposal Facility (IDF) Trench. The stratigraphy consists of some of the youngest sediments of the Missoula floods (younger than 770 ka). The lithology is dominated sands with minor silts and gravels that are largely unconsolidated. The stratigraphy can be subdivided into five geologic units that can be mapped throughout the trench. Four of the units were deposited by the Missoula floods and the youngest consists of windblown sand and silt. The sediment has little moisture and is consistent with that observed in the characterization boreholes. The sedimentary layers are flat lying and there are no faults or folds present. Two clastic dikes were encountered, one along the west wall and one that can be traced from the north to the southwall. The north-south clastic dike nearly bifurcates the trench but the west wall clastic dike can not be traced very far east into the trench. The classic dikes consist mainly of sand with clay-lined walls. The sediment in the dikes is compacted to partly cemented and are more resistant than the layered sediments

Preliminary Geophysical Investigations of the Ship Rock Diatreme, Navajo Nation, New Mexico

Science.gov (United States)

Gruen, E. M.; McCarthy, L.; Namingha, G.; Bank, C.; Noblett, J.; Semken, S.

2003-12-01

Magnetic and gravity data were collected at the Ship Rock minette neck and dikes, part of the Navajo volcanic field in the central Colorado Plateau, to investigate their subsurface structure. The deep root system of Ship Rock, an exhumed Oligocene maar-diatreme complex, has not been resolved. The diatreme is largely composed of minette tuff-breccia with a large wallrock fraction, whereas the dikes are composed of hypabyssal minette. The country rock is the Upper Cretaceous Mancos Shale. Density and magnetic contrasts between the igneous rock and surrounding shale suggest that the buried structure of Ship Rock can be imaged. Preliminary geophysical investigations were carried out in order to test this hypothesis. We collected magnetic and gravitational data along four lines selected to transect the major south and northeast dikes and to partly encircle the diatreme. Modeling differently sized, oriented and shaped intrusions, we created theoretical Free Air anomaly curves to try to match the two clearest anomalies. Modeling necessitates (i) that the major north-south dike dips west and (ii) the presence of a high-density, deep body near the diatreme. The Free Air anomaly curves show that smaller dikes might not be detected from gravity data; however, they are necessary to determine the presence of large, dense bodies. Although not modeled, the magnetics curves show that smaller dikes can easily be detected. Our study results are promising, and we plan a more thorough investigation in the future which will produce a magnetic map to determine if further buried dikes exist in the vicinity, and measure gravity along additional profiles to better constrain the location of the dense body at depth.

Shallow conduit system at Kilauea Volcano, Hawaii, revealed by seismic signals associated with degassing bursts

Science.gov (United States)

Chouet, Bernard; Dawson, Phillip

2011-01-01

Eruptive activity at the summit of Kilauea Volcano, Hawaii, beginning in March, 2008 and continuing to the present time is characterized by episodic explosive bursts of gas and ash from a vent within Halemaumau Pit Crater. These bursts are accompanied by seismic signals that are well recorded by a broadband network deployed in the summit caldera. We investigate in detail the dimensions and oscillation modes of the source of a representative burst in the 1−10 s band. An extended source is realized by a set of point sources distributed on a grid surrounding the source centroid, where the centroid position and source geometry are fixed from previous modeling of very-long-period (VLP) data in the 10–50 s band. The source time histories of all point sources are obtained simultaneously through waveform inversion carried out in the frequency domain. Short-scale noisy fluctuations of the source time histories between adjacent sources are suppressed with a smoothing constraint, whose strength is determined through a minimization of the Akaike Bayesian Information Criterion (ABIC). Waveform inversions carried out for homogeneous and heterogeneous velocity structures both image a dominant source component in the form of an east trending dike with dimensions of 2.9 × 2.9 km. The dike extends ∼2 km west and ∼0.9 km east of the VLP centroid and spans the depth range 0.2–3.1 km. The source model for a homogeneous velocity structure suggests the dike is hinged at the source centroid where it bends from a strike E 27°N with northern dip of 85° west of the centroid, to a strike E 7°N with northern dip of 80° east of the centroid. The oscillating behavior of the dike is dominated by simple harmonic modes with frequencies ∼0.2 Hz and ∼0.5 Hz, representing the fundamental mode ν11 and first degenerate mode ν12 = ν21 of the dike. Although not strongly supported by data in the 1–10 s band, a north striking dike segment is required for enhanced compatibility with

Red-Sea rift magmatism near Al Lith, Kingdom of Saudi Arabia

Science.gov (United States)

Pallister, J.S.

1986-01-01

A newly recognized Tertiary dike complex and comagmatic volcanic rocks exposed on the central Saudi Arabian coastal plain record early stages of magmatism related to Red Sea rifting. Intrusive and stratigraphic relationships, and new potassium-argon dating indicate episodic magmatism from about 30 Ma to the present. Additional stratigraphic and radiometric evidence suggests that limited rift-related magmatism may have began as early as about 50 Ma ago. An early phase of crustal extension in the region was accompanied by faulting and graben formation and by dike-swarm intrusion. The style of extension and intrusion changed approximately 20 Ma ago. Localized volcanism and sheeted dike injection ceased and were replaced by the intrusion of thick gabbro dikes. This change may mark the onset of sea-floor spreading in the central Red Sea.

Lower crustal xenoliths, Chinese Peak lava flow, central Sierra Nevada.

Science.gov (United States)

Dodge, F.C.W.; Calk, L.C.; Kistler, R.W.

1986-01-01

This assemblage of pyroxenite, peridotite and mafic granulite xenoliths in the toe of a 10 m.y. trachybasalt flow remnant overlying late Cretaceous granitic rocks, indicates the presence of a mafic-ultramafic complex beneath this part of central California; orthopyroxenites, websterites and clinopyroxenites are dominant. A few of the xenoliths contain ovoid opaque patches that are apparently pseudomorphs after garnet and have pyralspite garnet compositions; using a garnet-orthopyroxene geobarometer, they indicate a lower crustal depth of approx 40 km. Abundant mafic granulites can be subdivided into those with Al2O3 = or 15% and showing considerable scatter on oxide variation diagrams. The high-alumina granulite xenoliths have relatively low 87Rb/86Sr but high 87Sr/86Sr, whereas the low-alumina and ultramafic xenoliths have a wide range of 87Rb/86Sr, but lower 87Sr/86Sr; the isotopic data indicate roughly the same age as that of overlying granitic plutons (approx 100 m.y.). However, the granitic rocks have initial 87Sr/86Sr ratios intermediate between those of the high-alumina and ultramafic xenoliths, suggesting that they result from the mixing of basaltic magma (represented by the ultramafic rocks) and crustal materials, with subsequent crystal fractionation.-R.A.H.

Carbonate control of H2 and CH4 production in serpentinization systems at elevated P-Ts

Science.gov (United States)

Jones, L. Camille; Rosenbauer, Robert; Goldsmith, Jonas I.; Oze, Christopher

2010-01-01

Serpentinization of forsteritic olivine results in the inorganic synthesis of molecular hydrogen (H2) in ultramafic hydrothermal systems (e.g., mid-ocean ridge and forearc environments). Inorganic carbon in those hydrothermal systems may react with H2 to produce methane (CH4) and other hydrocarbons or react with dissolved metal ions to form carbonate minerals. Here, we report serpentinization experiments at 200°C and 300 bar demonstrating Fe2+ being incorporated into carbonates more rapidly than Fe2+ oxidation (and concomitant H2 formation) leading to diminished yields of H2 and H2-dependent CH4. In addition, carbonate formation is temporally fast in carbonate oversaturated fluids. Our results demonstrate that carbonate chemistry ultimately modulates the abiotic synthesis of both H2 and CH4 in hydrothermal ultramafic systems and that ultramafic systems present great potential for CO2-mineral sequestration.

New evidence for the asthenospheric origin of the Cameroon Volcanic Line from 1D shear wave velocities

CSIR Research Space (South Africa)

Tokam, AP

2013-10-01

Full Text Available the mantle composition beneath Ethiopia and southern Brazil (Keranen et al., 2009; Julia et al., 2008). Many petrological studies of ultramafic orogenic massifs and ultramafic xenoliths along the CVL (mainly around Mount Cameroon and the Adamawa....N. and Oya, M. 2010. Petrological and chemical variability of peridotite xenoliths from the Cameroon Volcanic Line, West Africa: an evidence from Plume emplacement. Journal of Mineralogical and Petrological Sciences, 107, 57-69. McKenzie, D...

Fragility analysis of flood protection structures in earthquake and flood prone areas around Cologne, Germany for multi-hazard risk assessment

Science.gov (United States)

Tyagunov, Sergey; Vorogushyn, Sergiy; Munoz Jimenez, Cristina; Parolai, Stefano; Fleming, Kevin; Merz, Bruno; Zschau, Jochen

2013-04-01

The work presents a methodology for fragility analyses of fluvial earthen dikes in earthquake and flood prone areas. Fragility estimates are being integrated into the multi-hazard (earthquake-flood) risk analysis being undertaken within the framework of the EU FP7 project MATRIX (New Multi-Hazard and Multi-Risk Assessment Methods for Europe) for the city of Cologne, Germany. Scenarios of probable cascading events due to the earthquake-triggered failure of flood protection dikes and the subsequent inundation of surroundings are analyzed for the area between the gauges Andernach and Düsseldorf along the Rhine River. Along this river stretch, urban areas are partly protected by earthen dikes, which may be prone to failure during exceptional floods and/or earthquakes. The seismic fragility of the dikes is considered in terms of liquefaction potential (factor of safety), estimated by the use of the simplified procedure of Seed and Idriss. It is assumed that initiation of liquefaction at any point throughout the earthen dikes' body corresponds to the failure of the dike and, therefore, this should be taken into account for the flood risk calculations. The estimated damage potential of such structures is presented as a two-dimensional surface (as a function of seismic hazard and water level). Uncertainties in geometrical and geotechnical dike parameters are considered within the framework of Monte Carlo simulations. Taking into consideration the spatial configuration of the existing flood protection system within the area under consideration, seismic hazard curves (in terms of PGA) are calculated for sites along the river segment of interest at intervals of 1 km. The obtained estimates are used to calculate the flood risk when considering the temporal coincidence of seismic and flood events. Changes in flood risk for the considered hazard cascade scenarios are quantified and compared to the single-hazard scenarios.

Magnetic Signature of the Lunar South Pole-Aitken Basin: Character, Origin, and Age

Science.gov (United States)

Purucker, Michael E.; Head, James W., III; Wilson, Lionel

2012-01-01

A new magnetic map of the Moon, based on Lunar Prospector (LP) magnetometer observations, sheds light on the origin of the South Pole-Aitken Basin (SPA), the largest and oldest of the recognized lunar basins. A set of WNW-trending linear to arcuate magnetic features, evident in both the radial and scalar observations, covers much of a 1000 km wide region centered on the NW portion of SPA. The source bodies are not at the surface because the magnetic features show no first-order correspondence to any surface topographic or structural feature. Patchy mare basalts of possible late Imbrianage are emplaced within SPA and are inferred to have been emplaced through dikes, directly from mantle sources. We infer that the magnetic features represent dike swarms that served as feeders for these mare basalts, as evident from the location of the Thomson/ Mare Ingenii, Van de Graaff, and Leeuwenhoek mare basalts on the two largest magnetic features in the region. Modeling suggests that the dike zone is between 25 and 50 km wide at the surface, and dike magnetization contrasts are in the range of 0.2 A/m. We theorize that the basaltic dikes were emplaced in the lunar crust when a long-lived dynamo was active. Based on pressure, temperature, and stress conditions prevalent in the lunar crust, dikes are expected to be a dominantly subsurface phenomenon, consistent with the observations reported here.

Prospects and requirements for an operational modelling unit in flood crisis situations

Directory of Open Access Journals (Sweden)

Anders Katharina

2016-01-01

Full Text Available Dike failure events pose severe flood crisis situations on areas in the hinterland of dikes. In recent decades the importance of being prepared for dike breaches has been increasingly recognized. However, the pre-assessment of inundation resulting from dike breaches is possible only based on scenarios, which might not reflect the situation of a real event. This paper presents a setup and workflow that allows to model dike breachinduced inundation operationally, i.e. when an event is imminent or occurring. A comprehensive system setup of an operational modelling unit has been developed and implemented in the frame of a federal project in Saxony-Anhalt, Germany. The modelling unit setup comprises a powerful methodology of flood modelling and elaborated operational guidelines for crisis situations. Nevertheless, it is of fundamental importance that the modelling unit is instated prior to flood events as a permanent system. Moreover the unit needs to be fully integrated in flood crisis management. If these crucial requirements are met, a modelling unit is capable of fundamentally supporting flood management with operational prognoses of adequate quality even in the limited timeframe of crisis situations.

Vertical linear feeder to elliptical igneous saucer-shaped sills: evidences from structural observations, geochemistry and experimental modeling

Science.gov (United States)

Galerne, C. Y.; Galland, O.; Neumann, E. R.; Planke, S.

2009-12-01

The structural relationships between sills and their feeders are poorly documented because they are rarely observed in the field and difficult to image on seismic data. For instance, it is unclear whether sills are fed by pipes, dikes or other sills. Nevertheless, the geometrical relationships between sills and their feeders provide first-order constraints on magma emplacement mechanisms. Here, we investigate the structural and geochemical relationships between sills and potential feeder dikes in a remarkably well-preserved and exposed sill complex, the Golden Valley Sill Complex (GVSC), Karoo Basin, South Africa. The GVSC consists of five major saucer-shaped sills and six dikes. The Golden Valley sill itself is an elliptical saucer, with a N-S trend. A one meter thick dike (D4) crops out underneath the southern tip of the Golden Valley sill. The strike of this dike is parallel to the long axis of the Golden Valley sill. Detailed sampling and geochemical analyses of the GVSC show that each sill and dike exhibits a specific geochemical signature. The Golden Valley sill and its underlying dike D4 have identical signatures. Although there is no clear structural evidence, the consistent geometrical and geochemical relationships between the Golden Valley sill and the D4 dike suggest that this vertical linear structure is the feeder of the overlying saucer-shaped sill. In order to investigate the relationships between sills and feeders, we resorted to scaled laboratory experiments. The experiments consisted of a low-viscosity vegetable oil representing magma and a cohesive fine-grained silica flour representing brittle rocks. We placed a horizontal weak layer into the silica flour, just above the top of the inlet, to simulate strata. Such a weak layer controlled the formation of horizontal sill that subsequently turned into a transgressive sheet leading to the formation of a saucer geometry. We ran experiments with varying inlet shapes: 1) a point inlet representing a

Geochemistry of reduced gas related to serpentinization of the Zambales ophiolite, Philippines

Science.gov (United States)

Abrajano, T.A.; Sturchio, N.C.; Kennedy, B.M.; Lyon, G.L.; Muehlenbachs, K.; Böhlke, J.K.

1990-01-01

Methane-hydrogen gas seeps with mantle-like C and noble gas isotopic characteristics issue from partially serpentinized ultramafic rocks in the Zambales ophiolite, Philippines. New measurements of noble gas and 14C isotope abundances, rock/mixed-volatile equilibrium calculations, and previous chemical and isotopic data suggest that these reduced gases are products of periodotite hydration. The gas seeps are produced in rock-dominated zones of serpentinization, and similar gases may be ubiquitous in ultramafic terranes undergoing serpentinization.

Development of kink bands in granodiorite: Effect of mechanical heterogeneities, fault geometry, and friction

Science.gov (United States)

Chheda, T. D.; Nevitt, J. M.; Pollard, D. D.

2014-12-01

The formation of monoclinal right-lateral kink bands in Lake Edison granodiorite (central Sierra Nevada, CA) is investigated through field observations and mechanics based numerical modeling. Vertical faults act as weak surfaces within the granodiorite, and vertical granodiorite slabs bounded by closely-spaced faults curve into a kink. Leucocratic dikes are observed in association with kinking. Measurements were made on maps of Hilgard, Waterfall, Trail Fork, Kip Camp (Pollard and Segall, 1983b) and Bear Creek kink bands (Martel, 1998). Outcrop scale geometric parameters such as fault length andspacing, kink angle, and dike width are used to construct a representative geometry to be used in a finite element model. Three orders of fault were classified, length = 1.8, 7.2 and 28.8 m, and spacing = 0.3, 1.2 and 3.6 m, respectively. The model faults are oriented at 25° to the direction of shortening (horizontal most compressive stress), consistent with measurements of wing crack orientations in the field area. The model also includes a vertical leucocratic dike, oriented perpendicular to the faults and with material properties consistent with aplite. Curvature of the deformed faults across the kink band was used to compare the effects of material properties, strain, and fault and dike geometry. Model results indicate that the presence of the dike, which provides a mechanical heterogeneity, is critical to kinking in these rocks. Keeping properties of the model granodiorite constant, curvature increased with decrease in yield strength and Young's modulus of the dike. Curvature increased significantly as yield strength decreased from 95 to 90 MPa, and below this threshold value, limb rotation for the kink band was restricted to the dike. Changing Poisson's ratio had no significant effect. The addition of small faults between bounding faults, decreasing fault spacing or increasing dike width increases the curvature. Increasing friction along the faults decreases slip, so

Deformation associated with the denudation of mantle-derived rocks at the Mid-Atlantic Ridge 13°-15°N: The role of magmatic injections and hydrothermal alteration

Science.gov (United States)

Picazo, Suzanne; Cannat, Mathilde; Delacour, AdéLie; EscartíN, Javier; RouméJon, StéPhane; Silantyev, Sergei

2012-09-01

Outcrops of deeply derived ultramafic rocks and gabbros are widespread along slow spreading ridges where they are exposed in the footwall of detachment faults. We report on the microstructural and petrological characteristics of a large number of samples from ultramafic exposures in the walls of the Mid-Atlantic Ridge (MAR) axial valley at three distinct locations at lat. 13°N and 14°45'N. One of these locations corresponds to the footwall beneath a corrugated paleo-fault surface. Bearing in mind that dredging and ROV sampling may not preserve the most fragile lithologies (fault gouges), this study allows us to document a sequence of deformation, and the magmatic and hydrothermal history recorded in the footwall within a few hundred meters of the axial detachment fault. At the three sampled locations, we find that tremolitic amphiboles have localized deformation in the ultramafic rocks prior to the onset of serpentinization. We interpret these tremolites as hydrothermal alteration products after evolved gabbroic rocks intruded into the peridotites. We also document two types of brittle deformation in the ultramafic rocks, which we infer could produce the sustained low magnitude seismicity recorded at ridge axis detachment faults. The first type of brittle deformation affects fresh peridotite and is associated with the injection of the evolved gabbroic melts, and the second type affects serpentinized peridotites and is associated with the injection of Si-rich hydrothermal fluids that promote talc crystallization, leading to strain localization in thin talc shear zones. We also observed chlorite + serpentine shear zones but did not identify samples with serpentine-only shear zones. Although the proportion of magmatic injections in the ultramafic rocks is variable, these characteristics are found at each investigated location and are therefore proposed as fundamental components of the deformation in the footwall of the detachment faults associated with denudation of

Flood early warning system : Design, implementation and computational modules

NARCIS (Netherlands)

Krzhizhanovskaya, V.V.; Shirshov, G.S.; Melnikova, N.B.; Belleman, R.G.; Rusadi, F.I.; Broekhuijsen, B.J.; Gouldby, B.P.; Lhomme, J.; Balis, B.; Bubak, M.; Pyayt, A.L.; Mokhov, I.I.; Ozhigin, A.V.; Lang, B.; Meijer, R.J.

2011-01-01

We present a prototype of the flood early warning system (EWS) developed within the UrbanFlood FP7 project. The system monitors sensor networks installed in flood defenses (dikes, dams, embankments, etc.), detects sensor signal abnormalities, calculates dike failure probability, and simulates

Evolution of Icelandic Central Volcanoes: Evidence from the Austurhorn Plutonic and Vestmannaeyjar Volcanic Complexes

Science.gov (United States)

1989-09-01

complex (figure 3.2; Blake, 1964, 1970). They consist of basic, intermediate and acid lavas as well as pyroclastic deposits. Early propylitic ...hypothesis because dikes are heavily fractured and commonly show incipient propylitization along fracture surfaces. Mafic dikes exhibit a sharp maximum in

Integrated Experimental and Modeling Studies of Mineral Carbonation as a Mechanism for Permanent Carbon Sequestration in Mafic/Ultramafic Rocks

Energy Technology Data Exchange (ETDEWEB)

Wang, Zhengrong [Yale Univ., New Haven, CT (United States); Qiu, Lin [Yale Univ., New Haven, CT (United States); Zhang, Shuang [Yale Univ., New Haven, CT (United States); Bolton, Edward [Yale Univ., New Haven, CT (United States); Bercovici, David [Yale Univ., New Haven, CT (United States); Ague, Jay [Yale Univ., New Haven, CT (United States); Karato, Shun-Ichiro [Yale Univ., New Haven, CT (United States); Oristaglio, Michael [Yale Univ., New Haven, CT (United States); Zhu, Wen-Iu [Univ. of Maryland, College Park, MD (United States); Lisabeth, Harry [Univ. of Maryland, College Park, MD (United States); Johnson, Kevin [Univ. of Hawaii, Honolulu, HI (United States)

2014-09-30

A program of laboratory experiments, modeling and fieldwork was carried out at Yale University, University of Maryland, and University of Hawai‘i, under a DOE Award (DE-FE0004375) to study mineral carbonation as a practical method of geologic carbon sequestration. Mineral carbonation, also called carbon mineralization, is the conversion of (fluid) carbon dioxide into (solid) carbonate minerals in rocks, by way of naturally occurring chemical reactions. Mafic and ultramafic rocks, such as volcanic basalt, are natural candidates for carbonation, because the magnesium and iron silicate minerals in these rocks react with brines of dissolved carbon dioxide to form carbonate minerals. By trapping carbon dioxide (CO₂) underground as a constituent of solid rock, carbonation of natural basalt formations would be a secure method of sequestering CO₂ captured at power plants in efforts to mitigate climate change. Geochemical laboratory experiments at Yale, carried out in a batch reactor at 200°C and 150 bar (15 MPa), studied carbonation of the olivine mineral forsterite (Mg₂SiO₄) reacting with CO₂ brines in the form of sodium bicarbonate (NaHCO₃) solutions. The main carbonation product in these reactions is the carbonate mineral magnesite (MgCO₃). A series of 32 runs varied the reaction time, the reactive surface area of olivine grains and powders, the concentration of the reacting fluid, and the starting ratio of fluid to olivine mass. These experiments were the first to study the rate of olivine carbonation under passive conditions approaching equilibrium. The results show that, in a simple batch reaction, olivine carbonation is fastest during the first 24 hours and then slows significantly and even reverses. A natural measure of the extent of carbonation is a quantity called the carbonation fraction, which compares the amount of carbon removed from solution, during a run, to the maximum amount

Scientific Results of Conduit Drilling in the Unzen Scientific Drilling Project (USDP

Directory of Open Access Journals (Sweden)

Kozo Uto

2005-09-01

Full Text Available Abstract Directional drilling at Unzen Volcano in Japan duringmid of 2004 penetrated the magma conduit and successfullyrecovered samples of the lava dike that is believed to havefed the 1991–1995 eruption. The dike was sampled about1.3 km below the volcano’s summit vent and is intrudedinto a broader conduit zone that is 0.5 km wide. This zoneconsists of multiple older lava dikes and pyroclastic veinsand has cooled to less than 200˚C. The lava dike sample wasunexpectedly altered, suggesting that circulation of hydrothermalfluids rapidly cools the conduit region of even veryactive volcanoes. It is likely that seismic signals monitoredprior to emergence of the lava dome reflected fracturing ofthe country rocks, caused by veining as volatiles escapedpredominantly upward, not outward, from the rising magma.Geophysical and geological investigation of cuttings andcore samples from the conduit and of bore-hole logging datacontinues.

Mineralización de talco asociada a los cuerpos ultramáficos de la Faja del Río de Las Tunas, Cordillera Frontal de Mendoza

Directory of Open Access Journals (Sweden)

Gargiulo, María Florencia

2011-12-01

Full Text Available Talc mineralization related to the ultramafic bodies of the Río de Las Tunas belt, Frontal Cordillera of Mendoza province. This contribution shows the main characteristics of the talc mineralization related to the Río de Las Tunas ultramafic bodies in the Salamanca Mining District, Frontal Cordillera of Mendoza province. According to the parageneses defined on the studied samples, three generations of talc were established: 1º crystallized in metaperidotites and related to the prograde stage of the regional metamorphism; 2º crystallized inreaction zones (mostly in the talc zone developed at the boundary between metaperidotites and their country-rocks.These reaction zones evidence a metasomatic process due to geochemical gradient between the ultramafic body and their country-rocks. This process was developed during the retrogression of the regional metamorphic cycle. 3º Talc present in shear-zones that cut across the ultramafic bodies. The extreme serpentinization of the ultramaficbodies is concentrated in shear-zones where the serpentine is subsequently replaced by talc ± carbonates related with a hydrothermal stage. Aqueous fluids relatively enriched in CO2 flowed through these shear-zones causing the cease of serpentine formation favoring the talc and/or carbonates. Mined talc deposits are those in shear zones and reaction zones. They are mostly industrial-, asbestine- or talcschist-type. The talc related to the hydrothermal stage can locally reach first and extra qualities.

Signal Processing Methods for Flood Early Warning Systems

NARCIS (Netherlands)

Pyayt, A.L.; Mokhov, I.I.; Kozionov, A.P.; Kusherbaeva, V.T.; Krzhizhanovskaya, V.V.; Broekhuijsen, B.J.; Meijer, R.J.; Hinkelmann, R.; Nasermoaddeli, M.H.; Liong, S.Y.; Savic, D.; Fröhle, P.; Daemrich, K.F.

2012-01-01

We present in a data-driven approach for detection of anomalies in earthen dam (dike) behaviour that can indicate the onset of flood defence structure failure. This approach is implemented in the UrbanFlood early warning system's Artificial Intelligence component that processes dike measurements in

Magma sources during Gondwana breakup: chemistry and chronology of Cretaceous magmatism in Westland, New Zealand

DEFF Research Database (Denmark)

van der Meer, Quinten Har Adriaan; Waight, Tod Earle; Scott, James M.

2013-01-01

by emplacement of granitoid plutons, the deposition of terrestrial Pororari Group sediments in extensional half-grabens across on- and offshore Westland, and the intrusion of mafic dikes from 90 Ma. These dikes are concentrated in the swarms of the Paparoa and Hohonu Ranges and were intruded prior...... to and simultaneous with volumetrically minor A-type plutonism at 82 Ma. The emplacement of mafic dikes and A-type plutonism at 82 Ma is significant as it coincides with the age of the oldest seafloor in the Tasman Sea, therefore it represents magmatism coincident with the initiation of seafloor spreading which...

Sr isotopic tracer study of the Samail ophiolite, Oman

International Nuclear Information System (INIS)

Lanphere, M.A.; Coleman, R.G.; Hopson, C.A.

1981-01-01

We have measured Rb and Sr concentrations and Sr isotopic compositions in 41 whole-rock samples and 12 mineral separates from units of the Samail ophiolite, including peridotite, gabbro, plagiogranite diabase dikes, and gabbro and websterite dikes within the metamorphic peridotite. Ten samples of cummulate gabbro from the Wadir Kadir section and nine samples from the Wadi Khafifah section have mean 87 Sr/ 86 Sr ratios and standard deviations of 0.70314 +- 0.00030 and 0.70306 +- 0.00034, respectively. The dispersion in Sr isotopic composition may reflect real heterogeneities in the magma source region. The average Sr isotopic composition of cumulate gabbro falls in the range of isotopic compositions of modern midocean ridge basalt. The 87 Sr/ 86 Sr ratios of noncumulate gabbro, plagiogranite, and diabase dikes range from 0.7034 to 0.7047, 0.7038 to 0.7046, and 0.7037 to 0.7061, respectively. These higher 87 Sr/ 86 Sr ratios are due to alteration of initial magmatic compositions by hydrothermal exchange with seawater. Mineral separates from dikes that cut harzburgite tectonite have Sr isotopic compositions which agree with that of cumulate gabbro. These data indicate that the cumulate gabbro and the different dikes were derived from partial melting of source regions that had similar long-term histories and chemical compositions

Risk reduction by combining nature values with flood protection?

Directory of Open Access Journals (Sweden)

Van Loon-Steensma Jantsje M.

2016-01-01

Full Text Available In the Netherlands, the concept of a multifunctional dike has already often been implemented, and has been identified as a promising climate adaptation measure. In a multifunctional dike, functions like urban development, transport infrastructure, recreation, agriculture or nature are deliberately combined with its primary flood protection function. This means that the design must be based on the requirements and life span of all different functions, while in a monofunctional dike only the flood protection function is considered. By accommodating other functions, a multifunctional dike may easier fit into, or even contribute to the quality of the landscape. Moreover, these other functions may help in financing the flood protection works, but governance is more complicated. To avoid costly adjustments forthcoming from changed safety standards, incorporation of multiple functions can require a more “robust” flood defence than a monofunctional flood defence. A robust flood defence can withstand more extreme situations than required by the present safety standards, and has a substantially lower flooding probability. Therefore, a multifunctional dike may be attractive in view of the uncertainties regarding the effects of climate change and a changing world. Moreover, it will result in reduced flood risk. As part of the Dutch Delta programme, several explorative studies on multifunctional dikes were initiated. Most studies focused on urban areas, but also in the rural area interest emerged for multifunctional dikes, e.g. for the integration of salt marshes into the flood defences. Marshes provide valuable habitat for vegetation and invertebrate species, and are important for wading birds. Furthermore, under condition of abundant sediment availability they can keep pace with sea level rise. Explorative modelling results indicate that vegetated forelands affect wave heights, even under extreme conditions. However, the inclusion of a vegetated

First evidence of lamprophyric magmatism within the Subbetic Zone (Southern Spain)

NARCIS (Netherlands)

Puga, E.; Beccaluva, L.; Bianchini, G.; De Federico, A.D.; Puga, M.A.D.; Alvarez-Valero, A.M.; Galindo-Zaldivar, J.; Wijbrans, J.R.

2010-01-01

Two drillings carried out at Cerro Prieto (Province of Málaga), together with additional geophysical data, revealed the existence of an igneous body formed of rock-types previously unknown in the Subbetic zone. The recovered rocks, emplaced under hypoabyssal conditions, are predominantly porphyric,

Aqueous Geochemical Dynamics at the Coast Range Ophiolite Microbial Observatory and The Case for Subsurface Mixing of Regional Groundwaters

Science.gov (United States)

Cardace, D.; Schrenk, M. O.; McCollom, T. M.; Hoehler, T. M.

2017-12-01

Serpentinization is the aqueous alteration (or hydration) of olivine and pyroxene minerals in ultramafic rocks, occurring in the seabed and ultramafic units on continents, such as at the Coast Range Ophiolite (CRO) in northern California, USA. Mineral products of serpentinization include serpentine, magnetite, brucite, talc, oxyhydroxides, carbonates, and diverse clay minerals. Such mineral transformations generate extremely high pH solutions with characteristic cation and dissolved metal loads, transmitting CH4, H2, and CO gas mixtures from depth; deep life in ultramafic terrains is thought to be fueled by chemical energy derived from these geochemical reactions. The installation of 8 groundwater monitoring wells in the CRO has allowed frequent monitoring since 2011. Influx of deeply sourced, serpentinization-influenced waters is evidenced by related geochemical shifts (e.g., pH, oxidation-reduction potential), but is apparently mixing with other, regionally important groundwater types. Evaluation salinity loads in concert with other parameters, we model the mixing scenario of this site of ongoing scientific study and experimentation.

Juvenile helium in ancient rocks: II. U-He,K-Ar, Sm-Nd, and Rb-Sr systematics in the Monche Pluton. 3He/4He ratios frozen in uranium-free ultramafic rocks

International Nuclear Information System (INIS)

Tolstikhin, I.N.; Dokuchaeva, V.S.; Kamensky, I.L.; Amelin, Yu.V.

1992-01-01

The important geodynamic parameter, the 3 He/ 4 He ratio in rocks and fluids of the continental crust, is generally decreasing from the mantle values (≅ 10 -5 ) to the radiogenic ratio (≅ 10 -8 ) on the time scale of about 1 Ga or less. However, the ratios, observed in some ancient rocks and minerals, are much higher than the radiogenic value due to a preferential retention of trapped He, when compared with radiogenic helium and/or a low U/ 3 He ratio in a sample. The distribution of He, Ar, Nd, and Sr isotopes, K, Rb, Sm, and U in ultrabasic rocks, in rock-forming minerals, in ores from the 2.49 Ga Monche Pluton, and in basic rocks of the Main Range (the Kola Peninsula) enables one to distinguish sources of the rocks and trapped fluids and outline some peculiarities of petrogenetic and fluid processes. The initial values of var-epsilon Nd (T) = -0.9 ± 0.5 , 87 Sr/ 86 Sr(T) = 0.7021 ± 0.0002, for the 2.49 Ga Monche Pluton are rather similar to these for other layered intrusions of the Baltic Shield. They differ considerably from the model values for the depleted 2.5 Ga old mantle. The observed and rather different sources of 3 He and 4 He as well as the considerable constancy of their ratio in different minerals, separated from both the ultramafic rocks and gabbros, implies: (1) an intensive process of mixing between mantle and crustal components: a melt convection in the chamber may have occurred; (2) the two types of rocks could originate by crystallization differentiation of one and the same melt. Practically all 3 He and 4 He are concentrated in secondary amphiboles; hence the fluid which stimulated the metamorphic process was probably released from the ultramafite-bearing melt

The Wallula fault and tectonic framework of south-central Washington, as interpreted from magnetic and gravity anomalies

Science.gov (United States)

Blakely, Richard J.; Sherrod, Brian; Weaver, Craig S.; Wells, Ray; Rohay, Alan C.

2014-01-01

The Yakima fold and thrust belt (YFTB) in central Washington has accommodated regional, mostly north-directed, deformation of the Cascadia backarc since prior to emplacement of Miocene flood basalt of the Columbia River Basalt Group (CRBG). The YFTB consists of two structural domains. Northern folds of the YFTB strike eastward and terminate at the western margin of a 20-mGal negative gravity anomaly, the Pasco gravity low, straddling the North American continental margin. Southern folds of the YFTB strike southeastward, form part of the Olympic–Wallowa lineament (OWL), and pass south of the Pasco gravity low as the Wallula fault zone. An upper crustal model based on gravity and magnetic anomalies suggests that the Pasco gravity low is caused in part by an 8-km-deep Tertiary basin, the Pasco sub-basin, abutting the continental margin and concealed beneath CRBG. The Pasco sub-basin is crossed by north-northwest-striking magnetic anomalies caused by dikes of the 8.5 Ma Ice Harbor Member of the CRBG. At their northern end, dikes connect with the eastern terminus of the Saddle Mountains thrust of the YFTB. At their southern end, dikes are disrupted by the Wallula fault zone. The episode of NE–SW extension that promoted Ice Harbor dike injection apparently involved strike-slip displacement on the Saddle Mountains and Wallula faults. The amount of lateral shear on the OWL impacts the level of seismic hazard in the Cascadia region. Ice Harbor dikes, as mapped with aeromagnetic data, are dextrally offset by the Wallula fault zone a total of 6.9 km. Assuming that dike offsets are tectonic in origin, the Wallula fault zone has experienced an average dextral shear of 0.8 mm/y since dike emplacement 8.5 Ma, consistent with right-lateral stream offsets observed at other locations along the OWL. Southeastward, the Wallula fault transfers strain to the north-striking Hite fault, the possible location of the M 5.7 Milton-Freewater earthquake in 1936.

The McMurdo Dry Valleys Magmatic Laboratory Workshop of 2005 in Antarctica

Science.gov (United States)

Marsh, B. D.; Simon, A.; Charrier, A. D.; Hersum, T. G.; Eschholz, E.

2005-12-01

In January of 2005, twenty-five petrologists, volcanologists, geochemists, structural geologists, and magma dynamicists spent two weeks studying and discussing the Magmatic Mush Column represented by the 180 Ma Ferrar Dolerites of the McMurdo Dry Valleys, Antarctica. This exceptionally well-exposed system shows a series of massive interconnected sills culminating in a capping of regional flood basalts. The lowermost sill, the Basement Sill, contains a massive ultramafic tongue of large phenocrysts of orthopyroxene (Opx) with subordinate Cpx and much smaller plagioclase. The 3-D distribution of this Opx Tongue serves as a tracer for the filling dynamics and local motion of the magma. Ponding of the Basement Sill has resulted in a small (500 m), but exceedingly diversified and extensively layered ultramafic intrusion, the Dais Intrusion. Because of the relatively rapid cooling time of this body, the Dais textures have been preserved before extensive annealing, which presents the possibility of using these textures to understand those of much larger, slowly cooled bodies. The combination of seeing in detail a wide variety of exceptional field relations depicting layering, sill emplacement mechanics, internal ordering and crystal sorting in the Opx Tongue, dike and fissure distributions, wall rock thermal effects, and many other first order features of central interest to understanding magmatic processes and performing research in real time was a new challenge to all involved. Facilities were set up at McMurdo Station for rock cutting, thin-section making, map making, GIS analysis, petrographic analysis, and computer modeling using existing chemical and physical data on a spectrum of the representative rock types. At any one time half the group was housed in the field in Bull Pass near Wright Valley and the remaining group was shuttled in by helicopter each day. The principal groups were switched about every three days. Areas for daily field-work were decided upon by

An assessment of the collection development and acquisition ...

African Journals Online (AJOL)

This study is an assessment of the collection development and acquisition processes in Kenneth Dike Library, University of Ibadan, Nigeria. The records are critically examined. Data on books purchased and donated from 2006 t o 2013 was obtained from the acquisition records and accession registers in Kenneth Dike ...

Modelling magma-drift interaction at the proposed high-level radioactive waste repository at Yucca Mountain, Nevada, USA

NARCIS (Netherlands)

Woods, Andrew W.; Sparks, Steve; Bokhove, Onno; Lejeune, Anne-Marie; Connor, Charles B.; Hill, Britain E.

2002-01-01

We examine the possible ascent of alkali basalt magma containing 2 wt percent water through a dike and into a horizontal subsurface drift as part of a risk assessment for the proposed high-level radioactive waste repository beneath Yucca Mountain, Nevada, USA. On intersection of the dike with the

Dam break modelling, risk assessment and uncertainty analysis for flood mitigation

NARCIS (Netherlands)

Zagonjolli, M.

2007-01-01

In this thesis a range of modelling techniques is explored to deal effectively with flood risk management. In particular, attention is paid to floods caused by failure of hydraulic structures such as dams and dikes. The methods considered here are applied for simulating dam and dike failure events,

The decompression of basaltic magma into a sub-surface repository

NARCIS (Netherlands)

Bokhove, Onno; Woods, A.W.

2002-01-01

We examine the ascent of volatile-rich basaltic magma through a vertical dike that intersects a horizontal tunnel of comparable cross-sectional area to the dike and located 300 $m$ below the surface and initially filled with air at atmospheric pressure. This process is a simplified representation of

Some Comments on the Entropy-Based Criteria for Piping

Directory of Open Access Journals (Sweden)

Emöke Imre

2015-04-01

Full Text Available This paper is an extension of previous work which characterises soil behaviours using the grading entropy diagram. The present work looks at the piping process in granular soils, by considering some new data from flood-protection dikes. The piping process is divided into three parts here: particle movement at the micro scale to segregate free water; sand boil development (which is the initiation of the pipe, and pipe growth. In the first part of the process, which occurs during the rising flood, the increase in shear stress along the dike base may cause segregation of water into micro pipes if the subsoil in the dike base is relatively loose. This occurs at the maximum dike base shear stress level (ratio of shear stress and strength zone which is close to the toe. In the second part of the process, the shear strain increment causes a sudden, asymmetric slide and cracking of the dike leading to the localized excess pore pressure, liquefaction and the formation of a sand boil. In the third part of the process, the soil erosion initiated through the sand boil continues, and the pipe grows. The piping in the Hungarian dikes often occurs in a two-layer system; where the base layer is coarser with higher permeability and the cover layer is finer with lower permeability. The new data presented here show that the soils ejected from the sand boils are generally silty sands and sands, which are prone to both erosion (on the basis of the entropy criterion and liquefaction. They originate from the cover layer which is basically identical to the soil used in the Dutch backward erosion experiments.

Petrogenesis of postcollisional magmatism at Scheelite Dome, Yukon, Canada: Evidence for a lithospheric mantle source for magmas associated with intrusion-related gold systems

Science.gov (United States)

Mair, John L.; Farmer, G. Lang; Groves, David I.; Hart, Craig J.R.; Goldfarb, Richard J.

2011-01-01

The type examples for the class of deposits termed intrusion-related gold systems occur in the Tombstone-Tungsten belt of Alaska and Yukon, on the eastern side of the Tintina gold province. In this part of the northern Cordillera, extensive mid-Cretaceous postcollisional plutonism took place following the accretion of exotic terranes to the continental margin. The most cratonward of the resulting plutonic belts comprises small isolated intrusive centers, with compositionally diverse, dominantly potassic rocks, as exemplified at Scheelite Dome, located in central Yukon. Similar to other spatially and temporally related intrusive centers, the Scheelite Dome intrusions are genetically associated with intrusion-related gold deposits. Intrusions have exceptional variability, ranging from volumetrically dominant clinopyroxene-bearing monzogranites, to calc-alkaline minettes and spessartites, with an intervening range of intermediate to felsic stocks and dikes, including leucominettes, quartz monzonites, quartz monzodiorites, and granodiorites. All rock types are potassic, are strongly enriched in LILEs and LREEs, and feature high LILE/HFSE ratios. Clinopyroxene is common to all rock types and ranges from salite in felsic rocks to high Mg augite and Cr-rich diopside in lamprophyres. Less common, calcic amphibole ranges from actinolitic hornblende to pargasite. The rocks have strongly radiogenic Sr (initial 87Sr/86Sr from 0.711-0.714) and Pb isotope ratios (206Pb/204Pb from 19.2-19.7), and negative initial εNd values (-8.06 to -11.26). Whole-rock major and trace element, radiogenic isotope, and mineralogical data suggest that the felsic to intermediate rocks were derived from mafic potassic magmas sourced from the lithospheric mantle via fractional crystallization and minor assimilation of metasedimentary crust. Mainly unmodified minettes and spessartites represent the most primitive and final phases emplaced. Metasomatic enrichments in the underlying lithospheric mantle

High Frequency Electromagnetic Impedance Imaging for Vadose Zone and Groundwater Characterization

International Nuclear Information System (INIS)

Newman, Greory A.; Alumbaugh, David L.; Hoversten, Michael; Nichols, Edward

2003-01-01

A geophysical experiment is described for characterizing the clastic dike systems, which are ubiquitous within the vadose zone at the Hanford Nuclear Reservation. because the dikes possess a significant electrical contrast from the insulating host medium, we have applied controlled source audio magnetotelluric (CSAMT) measurements to map their geometric extent and to further clarify if the dike complex acts as a conduit for contaminant transport within the vadose zone. Because of cost and weak natural field signal levels, we employed controlled field sourcing using the STRATGEM acquisition system. Use of artificial fields often goes with the assumption that the data required in the far-field of the transmitter

Timing of mafic magmatism in the Tapajós Province (Brazil) and implications for the evolution of the Amazon Craton: evidence from baddeleyite and zircon U Pb SHRIMP geochronology

Science.gov (United States)

Santos, João Orestes Schneider; Hartmann, Léo Afraneo; McNaughton, Neal Jesse; Fletcher, Ian Robert

2002-09-01

The precise timing and possible sources of the mafic rocks in the Amazon craton are critical for reconstruction of the Atlantica supercontinent and correlation of mafic magmatism worldwide. New SHRIMP U-Pb baddeleyite and zircon ages and the reinterpretation of 207 existing dates indicate one orogenic (Ingarana) and four postorogenic (Crepori, Cachoeira Seca, Piranhas, and Periquito) basaltic events in the Tapajós Province, south central Amazon craton. Orogenic gabbro dikes that host gold mineralization are 1893 Ma and interpreted as associated with the Ingarana gabbro intrusions of the bimodal calk-alkalic Parauari intrusive suite. The age of 1893 Ma can be used as a guide to discriminate older and mineralized orogenic dikes from younger and nonmineralized Crepori- and Cachoeira Seca-related mafic dikes. The baddeleyite U-Pb age of the postorogenic Crepori dolerite (gabbro-dolerite sills and dikes) is 1780±9 Ma, ˜150 my older than the ages provided by K-Ar. This value correlates well with the Avanavero tholeiitic intrusions in the Roraima group, in the northern part of the craton in Guyana, Venezuela, and Roraima in Brazil. Early Statherian tholeiitic magmatism was widespread not only in the Amazon craton, but also in the La Plata craton of southern South America, where it is known as the giant Piedra Alta swarm of Uruguay and the post-Trans-Amazonian dikes of Tandil in Argentina. The Cachoeira Seca troctolite represents laccoliths, Feixes, and São Domingos, whose baddeleyite U-Pb age is 1186±12 Ma, 120-150 my older than the known K-Ar ages. This age is comparable to other Stenian gabbroic rocks with alkalic affinity in the craton, such as the Seringa Formation in NE Amazonas and the basaltic flows of the Nova Floresta formation in Rondônia. Dolerite from the giant Piranhas dike swarm in the western Tapajós Province has a Middle Cambrian age (507±4 Ma, baddeleyite) and inherited zircons in the 2238-1229 Ma range. The Piranhas dikes fill extensional NNE and

Socio-Technical Security Metrics (Dagstuhl Seminar 14491)

NARCIS (Netherlands)

Gollmann, Dieter; Herley, Cormac; Koenig, Vincent; Pieters, Wolter; Sasse, Martina Angela

2015-01-01

This report documents the program and the outcomes of Dagstuhl Seminar 14491 "Socio-Technical Security Metrics". In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that the dikes should be high enough to

Bedrock Geology and Asbestos Deposits of the Upper Missisquoi Valley and Vicinity, Vermont

Science.gov (United States)

Cady, Wallace Martin; Albee, Arden Leroy; Chidester, A.H.

1963-01-01

conglomerate in which the mineral chloritoid is common. The overlying Moretown formation, also of Middle Ordovician age, contains granulite and slate, also greenstone and amphibolite of the Coburn Hill volcanic member. The Shaw Mountain formation, made up of conglomerate, phyllite, and limestone, is the oldest Silurian unit. The Shaw Mountain formation is succeeded by the Northfield slate of Middle Silurian age. The igneous rocks of the region include various ultramafic plutonic rocks, such as dunite, peridotite, and serpentinite, probably of Late Ordovician age; sills and nearly concordant dikes of metagabbro of Late Ordovician age; biotite granite plutons or Middle or Late Devonian age, most notably on Eltey Mountain; and hypabyssallamprophyre, probably of late Permian age. Metamorphic zoning is shown by the distribution of rocks of the epidote-amphibolite facies and the greenschist facies in and near the Green Mountains, and near Coburn Hill and Eltey Mountain. Metasomatism related to regional metamorphism has produced porphyroblasts and quartz segregations in the sedimentary and volcanic rocks, and steatitization and carbonatization of serpentinite. Contact metamorphism has formed rocks of the epidote-amphibolite facies near granite plutons, and probably calc-silicate rock at the contacts of ultramafic plutons. The axial anticline of the Green Mountain anticlinorium and other anticlines and synclines to the east are the major longitudinal structural features of the area. These structures are complicated by transverse folds, particularly a syncline in the vicinity of Tillotson Peak. Early minor cross folds that are best developed in the Hazens Notch formation are believed to be genetically related to the transverse folds. The axial planes of the cross folds are folded about the axes of the later longitudinal folds of the Green Mountain anticlinorium. The longitudinal and transverse fold systems probably formed in the same episode of defor

Biosphere in 3.5 Ga submarine hydrothermal system

Energy Technology Data Exchange (ETDEWEB)

Ueno, Yuichiro [Tokyo Univ. (Japan). Dept. of Earth Science and Astronomy

2003-04-01

Abundant organic matter (kerogen) was identified in {approx}3.5 Ga hydrothermal silica dikes from the North Pole area in the Pilbara craton, Western Australia. The silica dikes developed in the uppermost 1000 m of the ancient oceanic crust. Thus, they would have been deposited in the 3.5 Ga sub-seafloor hydrothermal system. The carbon and nitrogen isotopic compositions of the kerogen were analyzed in this study. Their highly {sup 13}C-depleted isotopic compositions ({delta}{sup 13}C = -38 to -33 per mille) strongly suggest that they are originally derived from biologically produced organic matter. The remarkable similarity of the {delta}{sup 13}C values between the kerogen and modern hydrothermal vent organisms may suggest that the kerogen was derived from chemoautotrophic organisms. This idea is also consistent with their nitrogen isotopic compositions ({delta}{sup 15}N = -4 to +4 per mille). The silica dikes consist mainly of fine-grained silica with minor pyrite and sphalerite. These mineral assemblages indicate that the silica dike was deposited from relatively low-temperature (probably less than 150degC) reducing hydrothermal fluid. Thus, anaerobic thermophilic/hyperthermophilic organisms could have survived in the hydrothermal fluid, which formed the silica dikes. Therefore, it is plausible that a chemoautotrophic-based biosphere (possibly methanogenesis) probably existed in the Early Archean sub-seafloor hydrothermal system. (author)

A geochemical study of lithospheric mantle beneath Northern Victoria Land (Antarctica): main evidences from volatile content in ultramafic xenoliths

Science.gov (United States)

Correale, Alessandra; Pelorosso, Beatrice; Rizzo, Andrea Luca; Coltorti, Massimo; Italiano, Francesco; Bonadiman, Costanza

2017-04-01

A geochemical study of ultramafic xenoliths from Northern Victoria Land (Green Point, GP and Handler Ridge, HR), is carried out in order to investigate the features of the lithosphere mantle beneath the Western Antarctic Ridge System (WARS). The majority of samples is spinel anhydrous lherzolite with rare presence of secondary phases (secondary cpx and glass). Geothermobarometric calculations, based on the Fe/Mg distribution among the peridotite minerals reveal that Sub Continental Lithospheric Mantle (SCLM) beneath Handler Ridge records temperatures and redox conditions higher then Greene Point (P fixed at 15 Kbar). Moreover, geochemical models evidence that, GP mantle domain represents a residuum after ˜7 to 21 % of partial melting in the spinel stability field, which was variably affected by interaction with infiltrating melts, acting in different times, from at least Jurassic to Cenozoic (Pelorosso et al., 2016). Fluid inclusions (FI) entrapped in olivine and pyroxene crystals were investigated for elemental and isotopic contents of both, noble gases (He, Ne, Ar) and CO2. He, Ar and Ne concentrations range from 1.52×10-14 to 1.07×10-12, from 4.09×10-13 to 3.47×10-11and from 2.84×10-16 to 7.57×10-14 mol/g, respectively, while the CO2amounts are between 7.08×10-10 and 8.12×10-7 mol/g. The 3He/4He varies between 5.95 and 20.18 Ra (where Ra is the 3He/4He ratio of air), being the lowest and the highest values measured in the He-poorer samples. Post-eruptive input of cosmogenic 3He and radiogenic 4He seems to influence mainly the samples associated to a lower He concentrations, increasing and decreasing respectively their primordial 3He/4He values, that for all the other samples range between 6.76 and 7.45 Ra. This range reasonably reflects the isotope signature of mantle beneath the investigated areas. The 4He/40Ar* ratio corrected for atmospheric-derived contamination ranges between 0.004 and 0.39. The lowest 4He/40Ar* values (4He/40Ar*correspondence of

LA-ICP-MS U-Pb apatite dating of Lower Cretaceous rocks from teschenite-picrite association in the Silesian Unit (southern Poland

Directory of Open Access Journals (Sweden)

Szopa Krzysztof

2014-08-01

Full Text Available The main products of volcanic activity in the teschenite-picrite association (TPA are shallow, sub-volcanic intrusions, which predominate over extrusive volcanic rocks. They comprise a wide range of intrusive rocks which fall into two main groups: alkaline (teschenite, picrite, syenite, lamprophyre and subalkaline (dolerite. Previous 40Ar/39Ar and 40K/40Ar dating of these rocks in the Polish Outer Western Carpathians, performed on kaersutite, sub-silicic diopside, phlogopite/biotite as well as on whole rock samples has yielded Early Cretaceous ages. Fluorapatite crystals were dated by the U-Pb LA-ICP-MS method to obtain the age of selected magmatic rocks (teschenite, lamprophyre from the Cieszyn igneous province. Apatite-bearing samples from Boguszowice, Puńców and Lipowa yield U-Pb ages of 103± 20 Ma, 119.6 ± 3.2 Ma and 126.5 ± 8.8 Ma, respectively. The weighted average age for all three samples is 117.8 ± 7.3 Ma (MSWD = 2.7. The considerably smaller dispersion in the apatite ages compared to the published amphibole and biotite ages is probably caused by the U-Pb system in apatite being less susceptible to the effects of hydrothermal alternation than the 40Ar/39Ar or 40K/40Ar system in amphibole and/or biotite. Available data suggest that volcanic activity in the Silesian Basin took place from 128 to 103 Ma with the the main magmatic phase constrained to 128-120 Ma.

Cobalt—Styles of deposits and the search for primary deposits

Science.gov (United States)

Hitzman, Murray W.; Bookstrom, Arthur A.; Slack, John F.; Zientek, Michael L.

2017-11-30

Cobalt (Co) is a potentially critical mineral. The vast majority of cobalt is a byproduct of copper and (or) nickel production. Cobalt is increasingly used in magnets and rechargeable batteries. More than 50 percent of primary cobalt production is from the Central African Copperbelt. The Central African Copperbelt is the only sedimentary rock-hosted stratiform copper district that contains significant cobalt. Its presence may indicate significant mafic-ultramafic rocks in the local basement. The balance of primary cobalt production is from magmatic nickel-copper and nickel laterite deposits. Cobalt is present in several carbonate-hosted lead-zinc and copper districts. It is also variably present in Besshi-type volcanogenic massive sulfide and siliciclastic sedimentary rock-hosted deposits in back arc and rift environments associated with mafic-ultramafic rocks. Metasedimentary cobalt-copper-gold deposits (such as Blackbird, Idaho), iron oxide-copper-gold deposits, and the five-element vein deposits (such as Cobalt, Ontario) contain different amounts of cobalt. None of these deposit types show direct links to mafic-ultramafic rocks; the deposits may result from crustal-scale hydrothermal systems capable of leaching and transporting cobalt from great depths. Hydrothermal deposits associated with ultramafic rocks, typified by the Bou Azzer district of Morocco, represent another type of primary cobalt deposit.In the United States, exploration for cobalt deposits may focus on magmatic nickel-copper deposits in the Archean and Proterozoic rocks of the Midwest and the east coast (Pennsylvania) and younger mafic rocks in southeastern and southern Alaska; also, possibly basement rocks in southeastern Missouri. Other potential exploration targets include—The Belt-Purcell basin of British Columbia (Canada), Idaho, Montana, and Washington for different styles of sedimentary rock-hosted cobalt deposits;Besshi-type VMS deposits, such as the Greens Creek (Alaska) deposit and

Using MicroFTIR to Map Mineral Distributions in Serpentinizing Systems

Science.gov (United States)

Johnson, A.; Kubo, M. D.; Cardace, D.

2016-12-01

Serpentinization, the water-rock reaction forming serpentine mineral assemblages from ultramafic precursors, can co-occur with the production of hydrogen, methane, and diverse organic compounds (McCollom and Seewald, 2013), evolving water appropriate for carbonate precipitation, including in ophiolite groundwater flow systems and travertine-producing seeps/springs. Serpentinization is regarded as a geologic process important to the sustainability of the deep biosphere (Schrenk et al., 2013) and the origin of life (Schulte et al., 2006). In this study, we manually polished wafers of ultramafic rocks/associated minerals (serpentinite, peridotite, pyroxenite, dunite; olivine, diopside, serpentine, magnetite), and travertine/constituent minerals (carbonate crusts; calcite, dolomite), and observed mineral boundaries and interfaces using µFTIR analysis in reflection mode. We used a Thermo Nicolet iS50 FTIR spectrometer coupled with a Continuum IR microscope to map minerals/boundaries. We identify, confirm, and document FTIR wavenumber regions linked to serpentinite- and travertine-associated minerals by referencing IR spectra (RRUFF) and aligning with x-ray diffraction. The ultramafic and carbonate samples are from the following field localities: McLaughlin Natural Reserve - a UC research reserve, Lower Lake, CA; Zambales, PH; Ontario, CA; Yellow Dog, MI; Taskesti, TK; Twin Sisters Range, WA; Sharon, MA; Klamath Mountains, CA; Dun Mountain, NZ; and Sussex County, NJ. Our goals are to provide comprehensive µFTIR characterization of mineral profiles important in serpentinites and related rocks, and evaluate the resolving power of µFTIR for the detection of mineral-encapsulated, residual organic compounds from biological activity. We report on µFTIR data for naturally occurring ultramafics and travertines and also estimate the limit of detection for cell membrane components in mineral matrices, impregnating increasing mass proportions of xanthan gum in a peridotite sand

Sudbury project (University of Muenster-Ontario Geological Survey): New investigations on Sudbury breccia

Science.gov (United States)

Mueller-Mohr, V.

Sudbury breccias occur as discordant dike breccias within the footwall rocks of the Sudbury structure, which is regarded as the possible remnant of a multiring basin. Exposures of Sudbury breccias in the North Range are known up to a radial distance of 60-80 km from the Sudbury Igneous Complex (SIC). The breccias appear more frequent within a zone of 10 km adjacent to the SIC and a further zone located about 20-33 km north of the structure. From differences in the structure of the breccias, as for example the size of the breccia dikes, contact relationships between breccia and country rock as well as between different breccia dikes, fragment content, and fabric of the ground mass, as seen in this section, the Sudbury Breccias have been classified into four different types. (1) Early breccias with a clastic/crystalline matrix comprise small dikes ranging in size from approx. 1 cm to max. 20 cm. (2) Polymict breccias with a clastic matrix represent the most common type of Sudbury breccia. The thickness of the dikes varies from several tens of centimeters to a few meters but can also extend to more than 100 m in the case of the largest known breccia dike. Contacts with country rock are sharp or gradational. Heterogenous matrix consisting of a fine-grained rock flour displays nonoriented textures as well as extreme flow lines. Chemical analysis substantiates at least some mixing with allochthonous material. (3) Breccias with a crystalline matrix are a subordinate type of Sudbury breccia. According to petrographical and chemical differences, three subtypes have been separated. (4) Late breccias with a clastic matrix are believed to represent the latest phase of brecciation. Two subtypes have been distinguished due to differences in the fragment content.

Superimposed deformation in seconds: breccias from the impact structure at Kentland, Indiana (USA)

Science.gov (United States)

Bjørnerud, M. G.

1998-05-01

Breccias from the central uplift at the Kentland, Indiana impact structure have outcrop and microscopic characteristics that give insight into events that may occur in a carbonate-dominated sedimentary sequence in the moments following hypervelocity impact. Three distinct types of brecciated rock bodies — fault breccias, breccia lenses, and breccia dikes — suggest multiple mechanisms of fragmentation. The fault breccias occur along steeply dipping faults that coincide with compositional discontinuities in the stratigraphic succession. The breccia lenses and dikes are less localized in occurrence and show no systematic spatial distribution or orientation. The fault breccias and breccia lenses show no consistent cross-cutting relationships, but both are transected by the breccia dikes. Textural analysis reveals significant differences in particle size distributions for the different breccias. The fault breccias are typically monomict, coarsest and least uniform in grain size, and yield the highest power-law exponent (fractal dimension) in plots of particle size vs. frequency. The polymict dike filling is finest and most uniform in grain size, has the lowest power-law exponent, and is locally laminated and size-sorted. SEM images of the dike-filling breccia show that fragmentation occurred to the scale of microns. Material within the breccia lenses has textural characteristics intermediate between the other two types, but the irregular morphology of these bodies suggests a mechanism of formation different from that of either of the other breccia categories. The breccia lenses and dikes both have sub-mm-scale spheroidal vugs that may have been formed by carbon dioxide bubbles released during sudden devolatilization of the carbonate country rock. Collectively, these observations shed light on the processes that occur during the excavation and modification phases of crater formation in carbonate strata — heterogeneous, polyphase, multiscale deformation accomplished

New insights into the magma chamber activity under Mauna Loa inferred from SBAS-InSAR and geodetic inversion modelling

Science.gov (United States)

Varugu, B. K.; Amelung, F.

2017-12-01

Mauna Loa volcano, located on the Big Island, Hawaii, is the largest volcano on the earth and historically been one of the most active volcanoes on the earth. Since its last eruption in 1984, there was a decrease in the magmatic activity, yet episodic inflations with increased seismicity sparks interests in the scientific community and there is strong need to monitor the volcano with growing infrastructure close to the flanks of the volcano. Geodetic modelling of the previous inflations illustrate that the magma activity is due to inflation of hydraulically connected dike and magma chamber located from 4-8km beneath the summit (Amelung et al. 2007). Most of the seismicity observed on Mauna Loa is due to the movement along a decollement fault situated at the base of the volcano. Magma inflation under Mauna Loa has started again during the last quarter of 2013 and is continuing still with an increased seismicity. In this study, we used 140 images form COSMO SkyMED between 2013-2017 to derive and model the ground deformation. We carried out time series InSAR analysis using Small Baseline (SB) approach. While the deformation pattern seems similar in many ways to the previous inflation periods, geodetic modelling for inversion of source parameters indicate a significant propagation of the dike ( 1 km) into the South West Rift Zone(SWRZ) and a decreased depth of the dike top from summit, compared to the previous inflations. Such propagation needs to be studied further in view of the steep slope of SWRZ. In understanding the dynamics of this propagating dike, we also observed an increased seismic activity since 2014 in the vicinity of the modelled dike. Here in this study we attempt to characterize the stresses induced by the propagating dike and seaward slipping movement along the basal decollement, to explain the increased seismicity using a finite element model.

Magma viscosity estimation based on analysis of erupted products. Potential assessment for large-scale pyroclastic eruptions

International Nuclear Information System (INIS)

Takeuchi, Shingo

2010-01-01

After the formulation of guidelines for volcanic hazards in site evaluation for nuclear installations (e.g. JEAG4625-2009), it is required to establish appropriate methods to assess potential of large-scale pyroclastic eruptions at long-dormant volcanoes, which is one of the most hazardous volcanic phenomena on the safety of the installations. In considering the volcanic dormancy, magma eruptability is an important concept. The magma eruptability is dominantly controlled by magma viscosity, which can be estimated from petrological analysis of erupted materials. Therefore, viscosity estimation of magmas erupted in past eruptions should provide important information to assess future activities at hazardous volcanoes. In order to show the importance of magma viscosity in the concept of magma eruptability, this report overviews dike propagation processes from a magma chamber and nature of magma viscosity. Magma viscosity at pre-eruptive conditions of magma chambers were compiled based on previous petrological studies on past eruptions in Japan. There are only 16 examples of eruptions at 9 volcanoes satisfying data requirement for magma viscosity estimation. Estimated magma viscosities range from 10 2 to 10 7 Pa·s for basaltic to rhyolitic magmas. Most of examples fall below dike propagation limit of magma viscosity (ca. 10 6 Pa·s) estimated based on a dike propagation model. Highly viscous magmas (ca. 10 7 Pa·s) than the dike propagation limit are considered to lose eruptability which is the ability to form dikes and initiate eruptions. However, in some cases, small precursory eruptions of less viscous magmas commonly occurred just before climactic eruptions of the highly viscous magmas, suggesting that the precursory dike propagation by the less viscous magmas induced the following eruptions of highly viscous magmas (ca. 10 7 Pa·s). (author)

experimental investigation of flow pattern around repelling

African Journals Online (AJOL)

A. Mahdieh NajafAbadi and M. M. Bateni

2017-09-01

Sep 1, 2017 ... FLOW-3D® software used to simulate flow pattern. The simulation was .... separated into separation zone, shear layer, vortices zone, end point of vorticity zone and primary flow zone. In the figure, b1 and b2 denote ... closer to the wall for the attractive spur dike. For case of the repelling spur dike, transverse.

New U Pb SHRIMP zircon age for the Schurwedraai alkali granite: Implications for pre-impact development of the Vredefort Dome and extent of Bushveld magmatism, South Africa

Science.gov (United States)

Graham, I. T.; De Waal, S. A.; Armstrong, R. A.

2005-12-01

The Schurwedraai alkali granite is one of a number of prominent ultramafic-mafic and felsic intrusions in the Neoarchaean to Palaeoproterozoic sub-vertical supracrustal collar rocks of the Vredefort Dome, South Africa. The alkali granite intruded the Neoarchaean Witwatersrand Supergroup and has a peralkaline to peraluminous composition. A new zircon SHRIMP crystallization age of 2052 ± 14 Ma for the Schurwedraai alkali granite places it statistically before the Vredefort impact event at 2023 ± 4 Ma and within the accepted emplacement interval of 2050-2060 Ma of the Bushveld magmatic event. The presence of the alkali granite and associated small ultramafic-mafic intrusions in the Vredefort collar rocks extends the southern extremity of Bushveld-related intrusions to some 120 km south of Johannesburg and about 150 km south of the current outcrop area of the Bushveld Complex. The combined effect of these ultramafic-mafic and felsic bodies may have contributed to a pronouncedly steep pre-impact geothermal gradient in the Vredefort area, and to the amphibolite-grade metamorphism observed in the supracrustal collar rocks of the Vredefort Dome.

Komatiites and nickel sulphide orebodies of the Black Swan area, Yilgarn Craton, Western Australia. 1. Petrology and volcanology of host rocks

Science.gov (United States)

Hill, R. E. T.; Barnes, S. J.; Dowling, S. E.; Thordarson, T.

2004-11-01

The Black Swan Succession is a bimodal association of dacitic and komatiitic volcanic rocks located about 50 km NNE of Kalgoorlie, within the 2.7-Ga Eastern Goldfields greenstone province of the Yilgarn Craton. The komatiite stratigraphy comprises a steep dipping, east facing package about 700 m in maximum thickness and about 2.5 km in strike length (Fig. 1), which hosts a number of economically exploitable Ni sulphide orebodies including the Silver Swan massive ore shoot (approximately half a million tonnes at about 10.5% Ni). The sequence can be subdivided into a Lower Felsic Unit, comprising coherent and autobrecciated facies of multiple dacite lava flows; an upper Eastern and lower Western Ultramafic Unit, each showing marked lateral facies variation, and an Upper Felsic Unit coeval with the Eastern Ultramafic Unit. The komatiite sequence has been metamorphosed at sub-greenschist facies in the presence of high proportions of CO2-rich fluid, giving rise to pervasive talc carbonate and talc carbonate quartz assemblages, with extensive preservation of pseudomorphed igneous textures. Cores of lizardite serpentinite are present in the thickest parts of the ultramafic succession. The degree of penetrative deformation is generally very low, and original stratigraphic relationships are largely intact in much of the sequence. The Eastern Ultramafic Unit and Western Ultramafic Unit are interpreted as components of a single large komatiite flow field, representing overlapping stages in the emplacement of a series of distributory lava pathways and flanking sheet flows. The Western Ultramafic Unit which hosts the bulk of the high-grade massive and disseminated ores is a sequence dominated by coarse-grained olivine cumulates, 2 km wide and up to 500 m thick, with major magma pathways represented by thick, homogenous olivine mesocumulate piles at its northern and southern ends: respectively 400 and 200 m thick. The sequence between the two major pathways consists of olivine

EFFECT OF ALTERNATIVE MULTINUTRIENT SOURCES ON SOIL CHEMICAL PROPERTIES

Directory of Open Access Journals (Sweden)

Vanessa Martins

2015-02-01

Full Text Available The current high price of potassium chloride and the dependence of Brazil on imported materials to supply the domestic demand call for studies evaluating the efficiency of alternative sources of nutrients. The aim of this work was to evaluate the effect of silicate rock powder and a manganese mining by-product, and secondary materials originated from these two materials, on soil chemical properties and on brachiaria production. This greenhouse experiment was conducted in pots with 5 kg of soil (Latossolo Vermelho-Amarelo distrófico - Oxisol. The alternative nutrient sources were: verdete, verdete treated with NH4OH, phonolite, ultramafic rock, mining waste and the proportion of 75 % of these K fertilizers and 25 % lime. Mixtures containing 25 % of lime were heated at 800 ºC for 1 h. These sources were applied at rates of 0, 150, 300, 450 and 600 kg ha-1 K2O, and incubated for 45 days. The mixtures of heated silicate rocks with lime promoted higher increases in soil pH in decreasing order: ultramafic rock>verdete>phonolite>mining waste. Applying the mining waste-lime mixture increased soil exchangeable K, and available P when ultramafic rock was incorporated. When ultramafic rock was applied, the release of Ca2+ increased significantly. Mining subproduct released the highest amount of Zn2+ and Mn2+ to the soil. The application of alternative sources of K, with variable chemical composition, altered the nutrient availability and soil chemical properties, improving mainly plant development and K plant uptake, and are important nutrient sources.

Climate change and the Lower Weser region: Direct and indirect consequences of a climate change for the ecological situation in the Weser, the forelands and in the diked marshes. Final report; Klimaaenderung und Unterweserregion (KLIMU) 'Fallstudie Weseraestuar'. Direkte und indirekte Auswirkungen eines Klimawandels auf die oekologischen Verhaeltnisse in Weser, Vorland und Binnendeichsmarschen. Teilprojekt Oekologischer Komplex. T. A: Binnenland. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Kraft, D.; Schirmer, M.

2001-03-01

In the subproject 'Ecological Complex' within the combined project 'Climate Change and the Lower Weser Region' (KLIMU), formerly 'Case Study Weser Estuary', the ecological effects of a climate change for the Lower Weser, the tidal forelands and the marshes protected by dikes are assessed. For the description of the ecological situation of the research area the biotope types acc. to DRACHENFELS are assessed and processed using a GIS (ARC View/ARC Info), complemented by relief data, status of protection, agricultural utilization and soil parameters. When a defined future climate (climate scenario) with +55 cm sea-level, +30 cm tidal rise, increased precipitation (but with -6% in summer.) and +2.7 C mean annual temperature acts upon this landscape, the following consequences will arise (without morphological adaptation), which are described in the final report part A for the marshes and in part B for the Lower Weser and the forelands: the shallow water areas of the Lower Weser increase by 29%, tidal areas by 55% and the tidal reeds by 250%; the grassland outside the summerdikes looses it's agricultural value and decreases by 30%. CO{sub 2}- and temperature-increase will rise the biomass production of the reeds by up to 25%, the invasion of neophytes and neozoans will be accelerated. In general the conditions in the foreland will become more natural. In the marshes protected by dikes the raised temperature will promote the invasion of thermophilic species as well; raised temperature and CO{sub 2}-contents of the atmosphere will allow an increase in productivity by 25% and thus help the agriculture. The biotope types of the moist grassland will remain dominated by agriculture, areas within 2 km from the dikes will tend to become more moist, areas far from there will in parts suffer from considerable drought during summer. The reaction options of the coastal protection result in the consumption of highly valued nature-areas (e.g. for a

Water resources of Windward Oahu, Hawaii

Science.gov (United States)

Takasaki, K.J.; Hirashima, George Tokusuke; Lubke, E.R.

1969-01-01

Windward Oahu lies in a large cavity--an erosional remnant of the Koolau volcanic dome at its greatest stage of growth. Outcrops include volcanic rocks associated with caldera collapse and the main fissure zone which is marked by a dike complex that extends along the main axis of the dome. The fissure zone intersects and underlies the Koolau Range north of Waiahole Valley. South of Waiahole Valley, the crest of the Koolau Range is in the marginal dike zone, an area of scattered dikes. The crest of the range forms the western boundary of windward Oahu. Dikes, mostly vertical and parallel or subparallel to the fissure zone, control movement and discharge of ground water because they are less permeable than the rocks they intrude. Dikes impound or partly impound ground water by preventing or retarding its movement toward discharge points. The top of this water, called high-level water in Hawaii, is at an altitude of about 1,000 feet in the north end of windward Oahu and 400 feet near the south end in Waimanalo Valley. It underlies most of the area and extends near or to the surface in poorly permeable rocks in low-lying areas. Permeability is high in less weathered mountain areas and is highest farthest away from the dike complex. Ground-water storage fluctuates to some degree owing to limited changes in the level of the ground-water reservoir--maximum storage is about 60,000 million gallons. The fluctuations control the rate at which ground water discharges. Even at its lowest recorded level, the reservoir contains a major part of the storage capacity because most of the area is perennially saturated to or near the surface. Tunnels have reduced storage by about 26,000 million gallons--only a fraction of the total storage--by breaching dike controls. Much of the reduction in storage can be restored if the .breached dike controls are replaced by flow-regulating bulkheads. Perennial streams intersect high-level water and collectively form its principal discharge. The

Mineral Carbonation Employing Ultramafic Mine Waste

Science.gov (United States)

Southam, G.; McCutcheon, J.; Power, I. M.; Harrison, A. L.; Wilson, S. A.; Dipple, G. M.

2014-12-01

Carbonate minerals are an important, stable carbon sink being investigated as a strategy to sequester CO2 produced by human activity. A natural playa (Atlin, BC, CAN) that has demonstrated the ability to microbially-accelerate hydromagnesite formation was used as an experimental model. Growth of microbial mats from Atlin, in a 10 m long flow-through bioreactor catalysed hydromagnesite precipitation under 'natural' conditions. To enhance mineral carbonation, chrysotile from the Clinton Creek Asbestos Mine (YT, CAN) was used as a target substrate for sulphuric acid leaching, releasing as much as 94% of the magnesium into solution via chemical weathering. This magnesium-rich 'feedstock' was used to examine the ability of the microbialites to enhance carbonate mineral precipitation using only atmospheric CO2 as the carbon source. The phototrophic consortium catalysed the precipitation of platy hydromagnesite [Mg5(CO3)4(OH)2·4H2O] accompanied by magnesite [MgCO3], aragonite [CaCO3], and minor dypingite [Mg5(CO3)4(OH)2·5H2O]. Scanning Electron Microscopy-Energy Dispersive Spectroscopy indicated that cell exteriors and extracellular polymeric substances (EPS) served as nucleation sites for carbonate precipitation. In many cases, entire cyanobacteria filaments were entombed in magnesium carbonate coatings, which appeared to contain a framework of EPS. Cell coatings were composed of small crystals, which intuitively resulted from rapid crystal nucleation. Excess nutrient addition generated eutrophic conditions in the bioreactor, resulting in the growth of a pellicle that sealed the bioreactor contents from the atmosphere. The resulting anaerobic conditions induced fermentation and subsequent acid generation, which in turn caused a drop in pH to circumneutral values and a reduction in carbonate precipitation. Monitoring of the water chemistry conditions indicated that a high pH (> 9.4), and relatively high concentrations of magnesium (> 3000 ppm), compared with the natural wetland (up to 1000 ppm), and dissolved inorganic carbon (> 20 mM C) were ideal for carbonate precipitation. Under optimum nutrient and magnesium inputs, a mass balance calculation using water chemistry data and hydromagnesite as the sole mineral product resulted in a carbon sequestration rate of 61 t C/ha/year.

Geodetic measurements and numerical models of the Afar rifting sequence 2005-2010

Science.gov (United States)

Ali, T.; Feigl, K.; Calais, E.; Hamling, I. J.; Wright, T. J.

2012-12-01

Rifting episodes are characterized by magma migration and dike intrusions that perturb the stress field within the surrounding lithosphere, inducing viscous flow in the lower crust and upper mantle that leads to observable, transient surface deformation. The Manda Hararo-Dabbahu rifting episode that occurred in the Afar depression between 2005 and 2010 is the first such episode to unfold fully in the era of satellite geodesy, thus providing a unique opportunity to probe the rheology of lithosphere at a divergent plate boundary. GPS and SAR measurements over the region since 2005 show accelerated surface deformation rates during post-diking intervals [Wright et al., Nature Geosci., 2012]. Using these observations in combination with a numerical model, we estimate model parameters that best explain the deformation signal. Our model accounts for three distinct processes: (i) secular plate spreading between Nubian and Arabian plates, (ii) time dependent post-rifting viscoelastic relaxation following the 14 dike intrusions that occurred between 2005 and 2010, including the 60 km long mega dike intrusion of September 2005, and (iii) magma accumulation within crustal reservoirs that feed the dikes. To model the time dependent deformation field, we use the open-source unstructured finite element code, Defmod [Ali, 2011, http://defmod.googlecode.com/]. Using a gradient-based iterative scheme [Ali and Feigl, Geochem. Geophys. Geosyst., 2012], we optimize the fit between observed and modeled deformation to estimate parameters in the model, including the locking depth of the rift zone, geometry and depth of magma reservoirs and rheological properties of lower crust and upper mantle, along with their formal uncertainties.

Failure of Grass Covered Flood Defences with Roads on Top Due to Wave Overtopping: A Probabilistic Assessment Method

Directory of Open Access Journals (Sweden)

Juan P. Aguilar-López

2018-06-01

Full Text Available Hard structures, i.e., roads, are commonly found over flood defences, such as dikes, in order to ensure access and connectivity between flood protected areas. Several climate change future scenario studies have concluded that flood defences will be required to withstand more severe storms than the ones used for their original design. Therefore, this paper presents a probabilistic methodology to assess the effect of a road on top of a dike: it gives the failure probability of the grass cover due to wave overtopping over a wide range of design storms. The methodology was developed by building two different dike configurations in computational fluid dynamics Navier–Stokes solution software; one with a road on top and one without a road. Both models were validated with experimental data collected from field-scale experiments. Later, both models were used to produce data sets for training simpler and faster emulators. These emulators were coupled to a simplified erosion model which allowed testing storm scenarios which resulted in local scouring conditioned statistical failure probabilities. From these results it was estimated that the dike with a road has higher probabilities (5 × 10−5 > Pf >1 × 10−4 of failure than a dike without a road (Pf < 1 × 10−6 if realistic grass quality spatial distributions were assumed. The coupled emulator-erosion model was able to yield realistic probabilities, given all the uncertainties in the modelling process and it seems to be a promising tool for quantifying grass cover erosion failure.

Surface deformation induced by magmatic processes at Pacaya Volcano, Guatemala revealed by InSAR

Science.gov (United States)

Wnuk, K.; Wauthier, C.

2017-09-01

Pacaya Volcano, Guatemala is a continuously active, basaltic volcano with an unstable western flank. Despite continuous activity since 1961, a lack of high temporal resolution geodetic surveying has prevented detailed modeling of Pacaya's underlying magmatic plumbing system. A new, temporally dense dataset of Interferometric Synthetic Aperture Radar (InSAR) RADARSAT-2 images, spanning December 2012 to March 2014, show magmatic deformation before and during major eruptions in January and March 2014. Inversion of InSAR surface displacements using simple analytical forward models suggest that three magma bodies are responsible for the observed deformation: (1) a 4 km deep spherical reservoir located northwest of the summit, (2) a 0.4 km deep spherical source located directly west of the summit, and (3) a shallow dike below the summit. Periods of heightened volcanic activity are instigated by magma pulses at depth, resulting in rapid inflation of the edifice. We observe an intrusion cycle at Pacaya that consists of deflation of one or both magma reservoirs followed by dike intrusion. Intrusion volumes are proportional to reservoir volume loss and do not always result in an eruption. Periods of increased activity culminate with larger dike-fed eruptions. Large eruptions are followed by inter-eruptive periods marked by a decrease in crater explosions and a lack of detected deformation. Co-eruptive flank motion appears to have initiated a new stage of volcanic rifting at Pacaya defined by repeated NW-SE oriented dike intrusions. This creates a positive feedback relationship whereby magmatic forcing from eruptive dike intrusions induce flank motion.

Selective Recovery of Yttrium and Ytterbium Oxides from Abu Rusheid REEs Concentrate via Alkaline Leaching and Solvent Extraction

International Nuclear Information System (INIS)

El-Sheikh, E.M.

2017-01-01

The REEs concentrate prepared from Abu Rusheid lamprophyre ore material is found to assay 44.65% Y_2O_3 and 13.87% Yb_2O_3 together with less amounts of 10 other REEs. This concentrate has been subjected to alkaline leaching process using seven different alkali reagents (single or mixed). From the obtained results, the mixed Na_2CO_3/(NH_4)HCO_3 reagent has been able to leach up to 87.32 % of Yb and 98.73% of Y together with a minor amount of Eu( 1.44)%. Finally, TBP extractant has been used to separate highly pure Yb and Y concentrate oxides from the nitrate solution

Metamorphic assemblages and the direction of flow of metamorphic fluids in four instances of serpentinization

Science.gov (United States)

Barnes, I.; Rapp, J.B.; O'Neil, J.R.; Sheppard, R.A.; Gude, A.J.

1972-01-01

Fluids related to Serpentinization are of at least three types. The first reported (Barnes and O'Neil, 1969) is a fluid of local meteoric origin, the chemical and thermodynamic properties of which are entirely controlled by olivine, orthopyroxene, brucite, and serpentine reactions. It is a Ca+2-OH-1 type and is shown experimentally to be capable of reacting with albite to yield calcium hydroxy silicates. Rodingites may form where the Ca+2-OH-1 type waters flow across the ultramafic contact and react with siliceous country rock. The second type of fluid has its chemical composition largely controlled before it enters the ultramafic rocks, but reactions within the ultramafic rocks fix the thermodynamic properties by reactions of orthopyroxene, olivine, calcite, brucite, and serpentine. The precipitation of brucite from this fluid clearly shows that fluid flow allows reaction products to be deposited at a distance from the point of solution. Thus, textural evidence for volume relations during Serpentinization may not be valid. The third type of fluid has its chemical properties fixed in part before the reactions with ultramafic rocks, in part by the reactions of orthopyroxene, olivine, and serpentine and in part by reactions with siliceous country rock at the contact. The reactions of the ultramafic rock and country rock with the fluid must be contemporaneous and require flow to be along the contact. This third type of fluid is grossly supersaturated with talc and tremolite, both found along the contact. The occurrence of magadiite, kenyaite, mountainite, and rhodesite along the contact is probably due to a late stage low-temperature reaction of fluids of the same thermodynamic properties as those that formed the talc and tremolite at higher temperatures. Oxygen isotope analyses of some of these minerals supports this conclusion. Rodingites form from Ca+2-rich fluids flowing across the contact; talc and tremolite form from silica-rich fluids flowing along the contact

Sulfur and carbon geochemistry of the Santa Elena peridotites: Comparing oceanic and continental processes during peridotite alteration

Science.gov (United States)

Schwarzenbach, Esther M.; Gill, Benjamin C.; Gazel, Esteban; Madrigal, Pilar

2016-05-01

Ultramafic rocks exposed on the continent serve as a window into oceanic and continental processes of water-peridotite interaction, so called serpentinization. In both environments there are active carbon and sulfur cycles that contain abiogenic and biogenic processes, which are eventually imprinted in the geochemical signatures of the basement rocks and the calcite and magnesite deposits associated with fluids that issue from these systems. Here, we present the carbon and sulfur geochemistry of ultramafic rocks and carbonate deposits from the Santa Elena ophiolite in Costa Rica. The aim of this study is to leverage the geochemistry of the ultramafic sequence and associated deposits to distinguish between processes that were dominant during ocean floor alteration and those dominant during low-temperature, continental water-peridotite interaction. The peridotites are variably serpentinized with total sulfur concentrations up to 877 ppm that is typically dominated by sulfide over sulfate. With the exception of one sample the ultramafic rocks are characterized by positive δ34Ssulfide (up to + 23.1‰) and δ34Ssulfate values (up to + 35.0‰). Carbon contents in the peridotites are low and are isotopically distinct from typical oceanic serpentinites. In particular, δ13C of the inorganic carbon suggests that the carbon is not derived from seawater, but rather the product of the interaction of meteoric water with the ultramafic rocks. In contrast, the sulfur isotope data from sulfide minerals in the peridotites preserve evidence for interaction with a hydrothermal fluid. Specifically, they indicate closed system abiogenic sulfate reduction suggesting that oceanic serpentinization occurred with limited input of seawater. Overall, the geochemical signatures preserve evidence for both oceanic and continental water-rock interaction with the majority of carbon (and possibly sulfate) being incorporated during continental water-rock interaction. Furthermore, there is

An alkaline spring system within the Del Puerto ophiolite (California USA): A Mars analog site

Energy Technology Data Exchange (ETDEWEB)

Blank, J.G.; Green, S.; Blake, D.; Valley, J.; Kita, N.; Treiman, A.; Dobson, P.F.

2008-10-01

Mars appears to have experienced little compositional differentiation of primitive lithosphere, and thus much of the surface of Mars is covered by mafic lavas. On Earth, mafic and ultramafic rocks present in ophiolites, oceanic crust and upper mantle that have been obducted onto land, are therefore good analogs for Mars. The characteristic mineralogy, aqueous geochemistry, and microbial communities of cold-water alkaline springs associated with these mafic and ultramafic rocks represent a particularly compelling analog for potential life-bearing systems. Serpentinization, the reaction of water with mafic minerals such as olivine and pyroxene, yields fluids with unusual chemistry (Mg-OH and Ca-OH waters with pH values up to {approx}12), as well as heat and hydrogen gas that can sustain subsurface, chemosynthetic ecosystems. The recent observation of seeps from pole-facing crater and canyon walls in the higher Martian latitudes supports the hypothesis that even present conditions might allow for a rockhosted chemosynthetic biosphere in near-surface regions of the Martian crust. The generation of methane within a zone of active serpentinization, through either abiogenic or biogenic processes, could account for the presence of methane detected in the Martian atmosphere. For all of these reasons, studies of terrestrial alkaline springs associated with mafic and ultramafic rocks are particularly timely. This study focuses on the alkaline Adobe Springs, emanating from mafic and ultramafic rocks of the California Coast Range, where a community of novel bacteria is associated with the precipitation of Mg-Ca carbonate cements. The carbonates may serve as a biosignature that could be used in the search for evidence of life on Mars.

Platinum, palladium, and rhodium in volcanic and plutonic rocks from the Gravina-Nutzotin belt, Alaska

Science.gov (United States)

Page, Norman J; Berg, Henry C.; Haffty, Joseph

1977-01-01

The Gravina-Nutzotin belt of Middle (?) Jurassic to middle Cretaceous sedimentary and volcanic rocks in south and southeastern Alaska includes concentrically zoned ultramafic complexes known to contain platinum-group metals. Previous isotopic, petrologic, and geologic studies suggested a close relation in time and space between the volcanic rocks and the ultramafic complexes. Interpretation of 40 analyses for platinum, palladium, and rhodium in volcanic and plutonic rocks of the belt indicates a strong geochemical correlation between the two groups of rocks and is in support of their being cogenetic either from directly connected magma chambers and flows or indirectly by selective concentration processes from similar mantle material.

FEBEX II Project Post-mortem analysis EDZ assessment

International Nuclear Information System (INIS)

Bazargan Sabet, B.; Shao, H.; Autio, J.; Elorza, F. J.

2004-01-01

Within the framework of the FEBEX II project a multidisciplinary team studied the mechanisms of creation of the potential damaged zone around the test drift. The research program includes laboratory and in situ investigations as well as the numerical modelling of the observed phenomena. Where laboratory investigations are concerned, the 14C-PMMA technique was applied to study the spatial distribution of porosity in the samples taken from the test drift wall. In addition complementary microscopy and scanning electron microscopy (SEM) studies were performed to make qualitative investigations on the pore apertures and minerals in porous regions. The results obtained with the PMMA method have not shown any clear increased porosity zone adjacent to the tunnel wall. The total porosity of the samples varied between 0.6-1.2%. The samples of unplugged region did not differ from the samples of plugged region. A clear increase in porosity to depths of 10-15 mm from the tunnel wall was detected in lamprophyre samples. According to the SEM/EDX analyses the excavation-disturbed zone in the granite matrix extended to depths of 1-3 mm from the wall surface. A few quartz grains were crushed and some micro fractures were found. Gas permeability tests were carried out on two hollow cylinder samples of about 1m long each taken on the granite wall perpendicular to the drift axis. The first sample was cored in the service area far from the heated zone and the second one at the level of the heater. The tests were performed at constant gas pressure by setting a steady state radial flow through a section of 1cm wide isolated by means of four mini-packers. The profile of the gas permeability according to the core length has been established. The results obtained for both considered samples have shown permeability ranging between 3.5 10-18 and 8.4 10-19m2, pointing out the absence of a marked damage. Acoustic investigations have been carried out with the objective of quantifying the

FEBEX II Project Post-mortem analysis EDZ assessment

Energy Technology Data Exchange (ETDEWEB)

Bazargan Sabet, B.; Shao, H.; Autio, J.; Elorza, F. J.

2004-07-01

Within the framework of the FEBEX II project a multidisciplinary team studied the mechanisms of creation of the potential damaged zone around the test drift. The research program includes laboratory and in situ investigations as well as the numerical modelling of the observed phenomena. Where laboratory investigations are concerned, the 14C-PMMA technique was applied to study the spatial distribution of porosity in the samples taken from the test drift wall. In addition complementary microscopy and scanning electron microscopy (SEM) studies were performed to make qualitative investigations on the pore apertures and minerals in porous regions. The results obtained with the PMMA method have not shown any clear increased porosity zone adjacent to the tunnel wall. The total porosity of the samples varied between 0.6-1.2%. The samples of unplugged region did not differ from the samples of plugged region. A clear increase in porosity to depths of 10-15 mm from the tunnel wall was detected in lamprophyre samples. According to the SEM/EDX analyses the excavation-disturbed zone in the granite matrix extended to depths of 1-3 mm from the wall surface. A few quartz grains were crushed and some micro fractures were found. Gas permeability tests were carried out on two hollow cylinder samples of about 1m long each taken on the granite wall perpendicular to the drift axis. The first sample was cored in the service area far from the heated zone and the second one at the level of the heater. The tests were performed at constant gas pressure by setting a steady state radial flow through a section of 1cm wide isolated by means of four mini-packers. The profile of the gas permeability according to the core length has been established. The results obtained for both considered samples have shown permeability ranging between 3.5 10-18 and 8.4 10-19m2, pointing out the absence of a marked damage. Acoustic investigations have been carried out with the objective of quantifying the

Mafic inclusions in Yosemite granites and Lassen Pk lavas: records of complex crust-mantle interactions

Energy Technology Data Exchange (ETDEWEB)

Reid, J.B. Jr.; Flinn, J.E.

1985-01-01

This study compares three small-scale magmatic systems dominated by mafic/felsic interaction that appear to be analogs to the evolution of their larger host systems: mafic inclusions from modern Lassen Pk lavas along with inclusions and related synplutonic dike materials from granitoids in the Tuolumne Intrusive Series. Each system represents quickly chilled mafic melt previously contaminated by digestion of rewarmed, super-solidus felsic hosts. Contaminants occur in part as megacrysts of reworked oligoclase with lesser hb and biot. Within each group MgO-variation diagrams for Fe, Ca, Ti, Si are strikingly linear (r>.96); alkalis are decidedly less regular, and many hybrid rocks show a curious, pronounced Na enrichment. Field data, petrography, and best fit modeling suggests this may result from flow concentration of oligoclase xenocrysts within contaminated synplutonic dikes, and is preserved in the inclusions when dike cores chill as pillows in their felsic host. Dissolution of mafic inclusions erases these anomalies and creates a more regular series of two-component mafic-felsic mixtures in the large host system. The inclusions and dikes thus appear to record a variety of late-stage mafic-felsic interactive processes that earlier and on a larger scale created much of the compositional variety of their intermediate host rocks.

Comportement des sols latéritiques compactés dans les remblais et digues de retenue des rejets miniers du Katanga (RDC)

OpenAIRE

Mukoko Kalenda, Gustave

2014-01-01

The use of laterites as building materials in the tropical countries, in particular in the road embankments and restraint dikes of mining discharge is strongly increased. After their implementation in tailings sites to dyke the mining discharges to avoid diffuse pollution in the environment, these lateritic materials are submitted to complex solicitation which can influence in a very important way their hydromechanical properties. In most of the cases of breaks of dikes, hydraulic fracturing ...

Living behind dikes : mimicking flooding experiences

NARCIS (Netherlands)

Zaalberg, R.; Midden, C.J.H.

2013-01-01

Delta areas like the Netherlands are threatened by global climate change. Awareness is, however, rather low. Our research objective was to investigate whether coping responses to flooding risks could be enhanced in a virtual environment (VE). A laboratory experiment was conducted in which

Bedrock Geologic Map of Vermont - Dikes

Data.gov (United States)

Vermont Center for Geographic Information — The bedrock geology was last mapped at a statewide scale 50 years ago at a scale of 1:250,000 (Doll and others, 1961). The 1961 map was compiled from 1:62,500-scale...

Whole-rock and mineral compositional constraints on the magmatic evolution of the Ni-Cu-(PGE) sulfide ore-bearing Kevitsa intrusion, northern Finland

Science.gov (United States)

Luolavirta, Kirsi; Hanski, Eero; Maier, Wolfgang; Santaguida, Frank

2018-01-01

The 2.06 Ga mafic-ultramafic Kevitsa intrusion is located in the Central Lapland greenstone belt. The lower ultramafic part of the intrusion hosts a large disseminated Ni-Cu-(PGE) sulfide deposit with Ni tenors ranging widely from architecture, variations in whole-rock and mineral compositions, and the presence of numerous inclusions and xenoliths. The OLPXs are mainly composed of cumulus olivine (Fo77-89) and clinopyroxene (Mg#81-92) with variable amounts of oikocrystic orthopyroxene (Mg#79-84). They comprise the bulk of the ultramafic cumulates and are the dominant host rocks to the sulfide ore. The host rocks to the regular and false ore type are mineralogically and compositionally similar (Fo 80-83, mostly) and show mildly LREE-enriched REE patterns (CeN/YbN 2), characteristic for the bulk of the Kevitsa ultramafic cumulates. The abundance of orthopyroxene and magnetite is lowest in the host rocks to the Ni-PGE ore type, being in line with the mineral compositions of the silicates, which are the most primitive in the intrusion. However, it contrasts with the LREE-enriched nature of the ore type (CeN/YbN 7), indicating significant involvement of crustal material in the magma. The contrasting intrusive stratigraphy in the different parts of the intrusion likely reflects different emplacement histories. It is proposed that the Kevitsa magma chamber was initially filled by stable continuous flow ("single" input) of basaltic magma followed by differentiation in an at least nearly closed system. In the following stage, new magma pulses were repeatedly emplaced into the interior of the intrusion in a dynamic (open) system forming the sulfide ore bodies. To gain the peculiar compositional and mineralogical characteristics of the Ni-PGE ore type, the related magma probably interacted with different country rocks en route to the Kevitsa magma chamber.

The Latemar: A Middle Triassic polygonal fault-block platform controlled by synsedimentary tectonics

Science.gov (United States)

Preto, Nereo; Franceschi, Marco; Gattolin, Giovanni; Massironi, Matteo; Riva, Alberto; Gramigna, Pierparide; Bertoldi, Luca; Nardon, Sergio

2011-03-01

Detailed field mapping of a Middle Triassic carbonate buildup, the Latemar in the western Dolomites, northern Italy, has been carried out. The Latemar is an isolated carbonate buildup that nucleates on a fault-bounded structural high (horst) cut into the underlying late Anisian carbonate bank of the Contrin Fm. This study demonstrates that extensional synsedimentary tectonics is the main factor controlling its geometry and provides an age for this tectonic phase. In an early phase, slopes were mostly composed of well bedded, clinostratified grainstones and rudstones. In a later stage, the deposition of grainstones was accompanied by the emplacement of clinostratified megabreccias. The upper portion of slopes is a microbial boundstone with abundant Tubiphytes and patches or lenses of grainstone. Boundstones may occasionally expand into the platform interior and downward to the base of the slope. The depositional profile was that of a mounded platform. The buildup is dissected by a dense framework of high angle fractures and faults, and by magmatic and sedimentary dikes, exhibiting two principal directions trending NNW-SSE and ENE-WSW. Faults trending WNW-ESE were also observed. Magmatic dikes are related to the emplacement of the nearby Predazzo intrusion and are thus upper Ladinian. Kinematic indicators of strike-slip activity were observed on fault planes trending NNE-SSW and NNW-SSE, that can be attributed to Cenozoic Alpine tectonics. Faults, magmatic dikes and sedimentary dikes show systematic cross-cutting relationships, with strike-slip faults cutting magmatic dikes, and magmatic dikes cutting sedimentary (neptunian) dikes. ENE-WSW and WNW-ESE faults are cut by all other structures, and record the oldest tectonic activity in the region. Structural analysis attributes this tectonic phase to an extensional stress field, with a direction of maximum extension oriented ca. N-S. Several lines of evidence, including sealed faults and growth wedge geometries allow us

Processes accompanying of mantle plume emplacement into continental lithosphere: Evidence from NW Arabian plate, Western Syria

Science.gov (United States)

Sharkov, E. V.

2015-12-01

Lower crustal xenoliths occurred in the Middle Cretaceous lamprophyre diatremes in Jabel Ansaria (Western Syria) (Sharkov et al., 1992). They are represented mainly garnet granulites and eclogite-like rocks, which underwent by deformations and retrograde metamorphism, and younger fresh pegmatoid garnet-kaersutite-clinopyroxene (Al-Ti augite) rocks; mantle peridotites are absent in these populations. According to mineralogical geothermobarometers, forming of garnet-granulite suite rocks occurred under pressure 13.5-15.4 kbar (depths 45-54 kn) and temperature 965-1115oC. At the same time, among populations of mantle xenoliths in the Late Cenozoic platobasalts of the region, quite the contrary, lower crustal xenoliths are absent, however, predominated spinel lherzolites (fragments of upper cooled rim of a plume head), derived from the close depths (30-40 km: Sharkov, Bogatikov, 2015). From this follows that ancient continental crust was existed here even in the Middle Cretaceous, but in the Late Cenozoic was removed by extended mantle plume head; at that upper sialic crust was not involved in geomechanic processes, because Precambrian metamorphic rocks survived as a basement for Cambrian to Cenozoic sedimentary cover of Arabian platform. In other words, though cardinal rebuilding of deep-seated structure of the region occurred in the Late Cenozoic but it did not affect on the upper shell of the ancient lithosphere. Because composition of mantle xenolithis in basalts is practically similar worldwide, we suggest that deep-seated processes are analogous also. As emplacement of the mantle plume heads accompanied by powerful basaltic magmatism, very likely that range of lower (mafic) continental crust existence is very convenient for extension of plume heads and their adiabatic melting. If such level, because of whatever reasons, was not reached, melting was limited but appeared excess of volatile matters which led to forming of lamprophyre or even kimberlite.

Investigating Natural Analogues for Co{sub 2} Sequestration in Ultra Mafic Rocks: A Reactive Transport Modelling Approach

Energy Technology Data Exchange (ETDEWEB)

Gherardi, F. [Istituto di Geoscienze e Georisorse, Consiglio Nazionale delle Ricerche, Pisa (Italy)

2013-07-15

Serpentinites of Ligurian ophiolites are studied as natural analogues for CO{sub 2} mineral sequestration in Italy. Mineralogical and geochemical observations indicate that silicification and carbonation are typical alteration processes induced by the interaction of CO{sub 2} charged fluids with pristine ultramafic rocks. Multicomponent reactive transport models have been applied to reproduce natural patterns and investigate carbon sequestration efficiency under high P{sub CO2} conditions. Temporal changes in porosity and permeability are predicted to affect the spatial and temporal occurrence of secondary minerals. The feedback between mineralogical transformations and transport properties of the geological media emerges as a key factor controlling the mineral carbonation potential of the investigated ultramafic rocks. (author)

PROBABILISTIC ANALYSES OF WASTE PACKAGE QUANTITIES IMPACTED BY POTENTIAL IGNEOUS DISRUPTION AT YUCCA MOUNTAIN

International Nuclear Information System (INIS)

M.G. Wallace

2005-01-01

A probabilistic analysis was conducted to estimate ranges for the numbers of waste packages that could be damaged in a potential future igneous event through a repository at Yucca Mountain. The analyses include disruption from an intrusive igneous event and from an extrusive volcanic event. This analysis supports the evaluation of the potential consequences of future igneous activity as part of the total system performance assessment for the license application for the Yucca Mountain Project (YMP). The first scenario, igneous intrusion, investigated the case where one or more igneous dikes intersect the repository. A swarm of dikes was characterized by distributions of length, width, azimuth, and number of dikes and the spacings between them. Through the use in part of a latin hypercube simulator and a modified video game engine, mathematical relationships were built between those parameters and the number of waste packages hit. Corresponding cumulative distribution function curves (CDFs) for the number of waste packages hit under several different scenarios were calculated. Variations in dike thickness ranges, as well as in repository magma bulkhead positions were examined through sensitivity studies. It was assumed that all waste packages in an emplacement drift would be impacted if that drift were intersected by a dike. Over 10,000 individual simulations were performed. Based on these calculations, out of a total of over 11,000 planned waste packages distributed over an area of approximately 5.5 km 2 , the median number of waste packages impacted was roughly 1/10 of the total. Individual cases ranged from 0 waste packages to the entire inventory being impacted. The igneous intrusion analysis involved an explicit characterization of dike-drift intersections, built upon various distributions that reflect the uncertainties associated with the inputs. The second igneous scenario, volcanic eruption (eruptive conduits), considered the effects of conduits formed in

DualSPHysics: A numerical tool to simulate real breakwaters

Science.gov (United States)

Zhang, Feng; Crespo, Alejandro; Altomare, Corrado; Domínguez, José; Marzeddu, Andrea; Shang, Shao-ping; Gómez-Gesteira, Moncho

2018-02-01

The open-source code DualSPHysics is used in this work to compute the wave run-up in an existing dike in the Chinese coast using realistic dimensions, bathymetry and wave conditions. The GPU computing power of the DualSPHysics allows simulating real-engineering problems that involve complex geometries with a high resolution in a reasonable computational time. The code is first validated by comparing the numerical free-surface elevation, the wave orbital velocities and the time series of the run-up with physical data in a wave flume. Those experiments include a smooth dike and an armored dike with two layers of cubic blocks. After validation, the code is applied to a real case to obtain the wave run-up under different incident wave conditions. In order to simulate the real open sea, the spurious reflections from the wavemaker are removed by using an active wave absorption technique.

Subsurface Geology of the Fenton Hill Hot Dry Rock Geothermal Energy Site

Energy Technology Data Exchange (ETDEWEB)

Levey, Schon S.

2010-12-01

The Precambrian rock penetrated by wells EE-2A and -3A belongs to one or more granitic to granodioritic plutons. The plutonic rock contains two major xenolith zones of amphibolite, locally surrounded by fine-grained mafic rock of hybrid igneous origin. The granodiorite is cut by numerous leucogranite dikes that diminish in abundance with depth. The most prominent structural feature is the main breccia zone, in which the rock is highly fractured and moderately altered. This zone is at least 75 m thick and is of uncertain but near-horizontal orientation. Fracture abundance decreases with increasing depth below the main breccia zone, and fractures tend to be associated with leucogranite dikes. This association suggests that at least some of the fractures making up the geothermal reservoir are of Precambrian age or have long-range orientations controlled by the presence of Precambrian-age granitic dikes.

Fusion of arkosic sand by intrusive andesite

Science.gov (United States)

Bailey, Roy A.

1954-01-01

An andesite dike in the Valles Mountains of northern New Mexico has intruded and partly fused arkosic sediments for a distance of 50 feet from its contacts. The dike is semi-circular in form, has a maximum width of about 100 feet, and is about 500 feet long. Small associated arcuate dikes are arranged in spiral fashion around the main dike, suggesting that they were intruded along shear fractures similar to those described by Burbank (1941). The fused rocks surrounding the andesite dike are of three general types: 1) partly fused arkosic sand, 2) fused clay, and 3) hybrid rocks. The fused arkosic sand consists of relict detrital grains of quartz, orthoclose, and plagioclase, imbedded in colorless glass containing microlites of tridymite, cordierite, and magnetite. The relict quartz grains are corroded and embayed by glass; the orthoclase is sanidinized and partly fused; and the plagioclase is inverted to the high temperature form and is partly fused. The fused clay, which was originally a mixture of montmorillonite and hydromica, consists primarily of cordierite but also contains needle-like crystals of sillimanite (?) or mullite (?). The hybrid rocks originated in part by intermixing of fused arkosic sediments and andesitic liquid and in part by diffusion of mafic constituents through the fused sediments. They are rich in cordierite and magnetite and also contain hypersthene, augite, and plagioclase. The composition of pigeonite in the andesite indicates that the temperature of the andesite at the time of intrusion probably did not exceed 1200?C. Samples of arkosic sand were fused in the presence of water in a Morey bomb at 1050?C. Stability relations of certain minerals in the fused sand suggest that fusion may have taken place at a lower temperature, however, and the fluxing action of volatiles from the andesite are thought to have made this possible.

Temporal Evolution of Surface Deformation and Magma Sources at Pacaya Volcano, Guatemala Revealed by InSAR

Science.gov (United States)

Wnuk, K.; Wauthier, C.

2016-12-01

Pacaya Volcano, Guatemala is a persistently active volcano whose western flank is unstable. Despite continuous activity since 1961, a lack of high temporal resolution geodetic surveying has prevented detailed modeling of Pacaya's underlying magmatic plumbing system. A new, temporally dense dataset of Interferometric Synthetic Aperture Radar (InSAR) RADARSAT-2 images, spanning December 2012 to March 2014, shows magmatic deformation before and during major eruptions in January and March 2014. Inverse modeling of InSAR surface displacements suggest that three magma bodies are responsible for observed deformation: (1) a 3.7 km deep spherical reservoir located northwest of the summit, (2) a 0.4 km deep spherical source located directly west of the summit, and (3) a shallow dike below the summit that provides the primary transport pathway for erupted materials. Periods of heightened activity are brought on by magma pulses at depth, which result in rapid inflation of the edifice. We observe an intrusion cycle at Pacaya that consists of deflation of one or both magma reservoirs followed by dike intrusion. Intrusion volumes are proportional to reservoir volume loss, and do not always result in an eruption. Periods of increased activity culminate with larger dike fed eruptions. Large eruptions are followed by inter eruptive periods marked by a decrease in crater explosions and a lack of deformation. A full understanding of magmatic processes at Pacaya is required to assess potential impacts on other aspects of the volcano such as the unstable western flank. Co-eruptive flank motion appears to have initiated a new stage of volcanic rifting at Pacaya defined by repeated NW-SE dike intrusions. This creates a positive feedback relationship whereby magmatic forcing from eruptive dike intrusions induces flank motion

Structure and Geochemistry of the Continental-Oceanic Crust Boundary of the Red Sea and the Rifted Margin of Western Arabia

Science.gov (United States)

Dilek, Y.; Furnes, H.; Schoenberg, R.

2009-12-01

The continental-oceanic crust boundary and an incipient oceanic crust of the Red Sea opening are exposed within the Arabian plate along a narrow zone of the Tihama Asir coastal plain in SW Saudi Arabia. Dike swarms, layered gabbros, granophyres and basalts of the 22 Ma Tihama Asir (TA) continental margin ophiolite represent products of magmatic differentiation formed during the initial stages of rifting between the African and Arabian plates. Nearly 4-km-wide zone of NW-trending sheeted dikes are the first products of mafic magmatism associated with incipient oceanic crust formation following the initial continental breakup. Gabbro intrusions are composed of cpx-ol-gabbro, cpx-gabbro, and norite/troctolite, and are crosscut by fine-grained basaltic dikes. Granophyre bodies intrude the sheeted dike swarms and are locally intrusive into the gabbros. Regional Bouger gravity anomalies suggest that the Miocene mafic crust represented by the TA complex extends westward beneath the coastal plain sedimentary rocks and the main trough of the Red Sea. The TA complex marks an incipient Red Sea oceanic crust that was accreted to the NE side of the newly formed continental rift in the earliest stages of seafloor spreading. Its basaltic to trachyandesitic lavas and dikes straddle the subalkaline-mildly alkaline boundary. Incompatible trace element relationships (e.g. Zr-Ti, Zr-P) indicate two distinct populations. The REE concentrations show an overall enrichment compared to N-MORB; light REEs are enriched over the heavy ones ((La/Yb)n > 1), pointing to an E-MORB influence. Nd-isotope data show ɛNd values ranging from +4 to +8, supporting an E-MORB melt source. The relatively large variations in ɛNd values also suggest various degrees of involvement of continental crust during ascent and emplacement, or by mixing of another mantle source.

First results from analysis of coordinated AVIRIS, TIMS, and ISM (French) data for the Ronda (Spain) and Beni Bousera (Morocco) peridotites

Science.gov (United States)

Mustard, J. F.; Hurtrez, S.; Pinet, P.; Sotin, C.

1992-01-01

Ultramafic rocks are relatively rare at the Earth's surface but constitute the vast majority of the Earth by volume. Exposures of ultramafic bodies are therefore crucial for deducing many important processes that occur in the Earth's mantle. An important science question regarding the spatial distribution, abundance, and composition of mafic minerals in ultramafic bodies that can be examined with advanced sensor data is the melting process. When a lherzolite melts, clinopyroxene (cpx) melts first and therefore variations in the modal amount of cpx remaining in the mantle are a reflection of the amount of fractional melting that has occurred. Fe goes preferentially into the melt during melting but a 20 percent batch melting (i.e. closed system) acquires less Fe relative to 20 percent fractional melting (i.e. open system). Since the strength and wavelength of diagnostic absorptions is a strong function of Fe content, it is possible to make maps of the variation in Fe:Mg ratios which can be related to the general melting process. Accurate ground-truth information about local mineralogy provides internal calibration and consistency checks. Investigations using imaging spectrometer are very complementary to field studies because advanced sensor data can provide a synoptic view of modal mineralogy and chemical composition whereas field studies focus on detailed characterization of local areas. Two excellent exposures of ultramafic lithologies are being investigated with visible to mid-infrared imaging spectrometer data: the Ronda peridotite near Ronda, Spain and the Beni Bousera ophiolitic fragment in northern Morocco. Although separated by the Alboran Sea, these bodies are thought to be related and represent fertile sub-continental mantle. The Ronda peridotite is predominantly spinel lherzolite but grades into harzburgite and shows considerable variation in major and trace element compositions. Mafic layering and dykes (i.e. olivine gabbro) are also observed. This

Magma Dynamics at Yucca Mountain, Nevada

Energy Technology Data Exchange (ETDEWEB)

D. Krier

2005-08-29

Small-volume basaltic volcanic activity at Yucca Mountain has been identified as one of the potential events that could lead to release of radioactive material from the U.S. Department of Energy (DOE) designated nuclear waste repository at Yucca Mountain. Release of material could occur indirectly as a result of magmatic dike intrusion into the repository (with no associated surface eruption) by changing groundwater flow paths, or as a result of an eruption (dike intrusion of the repository drifts, followed by surface eruption of contaminated ash) or volcanic ejection of material onto the Earth's surface and the redistribution of contaminated volcanic tephra. Either release method includes interaction between emplacement drifts and a magmatic dike or conduit, and natural (geologic) processes that might interrupt or halt igneous activity. This analysis provides summary information on two approaches to evaluate effects of disruption at the repository by basaltic igneous activity: (1) descriptions of the physical geometry of ascending basaltic dikes and their interaction with silicic host rocks similar in composition to the repository host rocks; and (2) a summary of calculations developed to quantify the response of emplacement drifts that have been flooded with magma and repressurized following blockage of an eruptive conduit. The purpose of these analyses is to explore the potential consequences that could occur during the full duration of an igneous event.

Magma Dynamics at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

D. Krier

2005-01-01

Small-volume basaltic volcanic activity at Yucca Mountain has been identified as one of the potential events that could lead to release of radioactive material from the U.S. Department of Energy (DOE) designated nuclear waste repository at Yucca Mountain. Release of material could occur indirectly as a result of magmatic dike intrusion into the repository (with no associated surface eruption) by changing groundwater flow paths, or as a result of an eruption (dike intrusion of the repository drifts, followed by surface eruption of contaminated ash) or volcanic ejection of material onto the Earth's surface and the redistribution of contaminated volcanic tephra. Either release method includes interaction between emplacement drifts and a magmatic dike or conduit, and natural (geologic) processes that might interrupt or halt igneous activity. This analysis provides summary information on two approaches to evaluate effects of disruption at the repository by basaltic igneous activity: (1) descriptions of the physical geometry of ascending basaltic dikes and their interaction with silicic host rocks similar in composition to the repository host rocks; and (2) a summary of calculations developed to quantify the response of emplacement drifts that have been flooded with magma and repressurized following blockage of an eruptive conduit. The purpose of these analyses is to explore the potential consequences that could occur during the full duration of an igneous event

Rifts of deeply eroded Hawaiian basaltic shields: A structural analog for large Martian volcanoes

Science.gov (United States)

Knight, Michael D.; Walker, G. P. L.; Mouginis-Mark, P. J.; Rowland, Scott K.

1988-01-01

Recently derived morphologic evidence suggests that intrusive events have not only influenced the growth of young shield volcanoes on Mars but also the distribution of volatiles surrounding these volcanoes: in addition to rift zones and flank eruptions on Arsia Mons and Pavonis Mons, melt water channels were identified to the northwest of Hecates Tholus, to the south of Hadriaca Patera, and to the SE of Olympus Mons. Melt water release could be the surface expression of tectonic deformation of the region or, potentially, intrusive events associated with dike emplacement from each of these volcanoes. In this study the structural properties of Hawaiian shield volcanoes were studied where subaerial erosion has removed a sufficient amount of the surface to enable a direct investigation of the internal structure of the volcanoes. The field investigation of dike morphology and magma flow characteristics for several volcanoes in Hawaii is reported. A comprehensive investigation was made of the Koolau dike complex that passes through the summit caldera. A study of two other dissected Hawaiian volcanoes, namely Waianae and East Molokai, was commenced. The goal is not only to understand the emplacement process and magma flow within these terrestrial dikes, but also to explore the possible role that intrusive events may have played in volcano growth and the distribution of melt water release on Mars.

Rifts of deeply eroded Hawaiian basaltic shields: a structural analog for large Martian volcanoes

International Nuclear Information System (INIS)

Knight, M.D.; Walker, G.P.L.; Mouginis-Mark, P.J.; Rowland, S.K.

1988-01-01

Recently derived morphologic evidence suggests that intrusive events have not only influenced the growth of young shield volcanoes on Mars but also the distribution of volatiles surrounding these volcanoes: in addition to rift zones and flank eruptions on Arsia Mons and Pavonis Mons, melt water channels were identified to the northwest of Hecates Tholus, to the south of Hadriaca Patera, and to the SE of Olympus Mons. Melt water release could be the surface expression of tectonic deformation of the region or, potentially, intrusive events associated with dike emplacement from each of these volcanoes. In this study the structural properties of Hawaiian shield volcanoes were studied where subaerial erosion has removed a sufficient amount of the surface to enable a direct investigation of the internal structure of the volcanoes. The field investigation of dike morphology and magma flow characteristics for several volcanoes in Hawaii is reported. A comprehensive investigation was made of the Koolau dike complex that passes through the summit caldera. A study of two other dissected Hawaiian volcanoes, namely Waianae and East Molokai, was commenced. The goal is not only to understand the emplacement process and magma flow within these terrestrial dikes, but also to explore the possible role that intrusive events may have played in volcano growth and the distribution of melt water release on Mars

The Environmental Assessment and Management (TEAM) Guide: Colorado Supplement

Science.gov (United States)

2010-03-01

Nest c. Flattops d. Great Sand Dunes e. La Garita f. Maroon Bells -- Snowmass g. Mount Zirkel h. Rawah i. Weminuche j. West Elk B. All...of Sections XIII.D., XIII.E., or XIII.F.: 1. National Monuments a. Florissant Fossil Beds b. Colorado c. Dinosaur d. Great Sand Dunes (those...that the minimum distance between tanks and toe of interior dike walls is 5 ft (1.5 m). Verify that drains for diked area are controlled in a manner so

Middle Holocene coastal environment and the rise of the Liangzhu City complex on the Yangtze delta, China

Science.gov (United States)

Liu, Yan; Sun, Qianli; Thomas, Ian; Zhang, Li; Finlayson, Brian; Zhang, Weiguo; Chen, Jing; Chen, Zhongyuan

2015-11-01

The large prehistoric city of Liangzhu and its associated earthen dike emerged on the Yangtze delta-coast after two millennia of occupation in this area by scattered communities. Details of its development have been widely discussed in the literature. Our results reveal that the city was selectively built at the head of an embayment backed by hills, with close access to food, freshwater and timber, and with protection from coastal hazards. Radiocarbon and optically stimulated luminescence (OSL) dating shows that it was built around 4.8-4.5 ka, and the earthen dike was constructed a little later at 4.1 ka. During this time, saltwater wetlands were changing to freshwater in response to rapid coastal progradation as the postglacial sea-level rise stabilized. This facilitated rice farming and furthered the development of the city with elaborate city planning. The younger large-scale earthen dike and artificial ponds possibly suggest increasing demand for flood mitigation and irrigation.

Lunar floor-fractured craters as magmatic intrusions: Geometry, modes of emplacement, associated tectonic and volcanic features, and implications for gravity anomalies

Science.gov (United States)

Jozwiak, Lauren M.; Head, James W.; Wilson, Lionel

2015-03-01

Lunar floor-fractured craters are a class of 170 lunar craters with anomalously shallow, fractured floors. Two end-member processes have been proposed for the floor formation: viscous relaxation, and subcrater magmatic intrusion and sill formation. Recent morphometric analysis with new Lunar Reconnaissance Orbiter Laser Altimeter (LOLA) and image (LROC) data supports an origin related to shallow magmatic intrusion and uplift. We find that the distribution and characteristics of the FFC population correlates strongly with crustal thickness and the predicted frequency distribution of overpressurization values of magmatic dikes. For a typical nearside lunar crustal thickness, dikes with high overpressurization values favor surface effusive eruptions, medium values favor intrusion and sill formation, and low values favor formation of solidified dikes concentrated lower in the crust. We develop a model for this process, make predictions for the morphologic, morphometric, volcanic, and geophysical consequences of the process and then compare these predictions with the population of observed floor-fractured craters. In our model, the process of magmatic intrusion and sill formation begins when a dike propagates vertically towards the surface; as the dike encounters the underdense brecciated region beneath the crater, the magmatic driving pressure is insufficient to continue vertical propagation, but pressure in the stalled dike exceeds the local lithostatic pressure. The dike then begins to propagate laterally forming a sill which does not propagate past the crater floor region because increased overburden pressure from the crater wall and rim crest pinch off the dike at this boundary; the sill then continues to inflate, further raising and fracturing the brittle crater floor. When the intrusion diameter to intrusion depth ratio is smaller than a critical value, the intrusion assumes a laccolith shape with a domed central region. When the ratio exceeds a critical value

Geochemistry of metavolcanic rocks in the Archean Greenstone Belt of Identidade, SE Para, Brazil

International Nuclear Information System (INIS)

Souza, Zorano S.

1995-01-01

The paper discusses the geochemistry of the ultramafic and mafic volcanic rocks of the Identidade belt (IDB), in order to present hypothesis about their possible sources and magmatic evolution. The chemical data were obtained by ICP method. The analytical errors are less then 5% for major elements, less than 10% for the minor ones, and around 5% for trace elements. Save additional data from the meta ultramafic rocks of the Seringa belt, situated 100 km to the west of the IDB, were also considered. The XLFRAC program was employed for fractional crystallization modelling of major elements. For trace element modelling the equations of fractional crystallization and equilibrium partial melting were applied, using an unpublished program written in Pascal. 10 figs. 8 tabs

Strengths and strain energies of volcanic edifices: implications for eruptions, collapse calderas, and landslides

Directory of Open Access Journals (Sweden)

A. Gudmundsson

2012-07-01

Full Text Available Natural hazards associated with volcanic edifices depend partly on how fracture resistant the edifices are, i.e. on their strengths. Observations worldwide indicate that large fluid-driven extension fractures (dikes, inclined sheets, shear fractures (landslides, and mixed-mode fractures (ring dikes and ring faults normally propagate more easily in a basaltic edifice (shield volcano than in a stratovolcano. For example, dike-fed eruptions occur once every few years in many basaltic edifices but once every 10^2-3 yr in many stratovolcanoes. Large landslides and caldera collapses also appear to be more common in a typical basaltic edifice/shield volcano than in a typical stratovolcano. In contrast to a basaltic edifice, a stratovolcano is composed of mechanically dissimilar rock layers, i.e. layers with mismatching elastic properties (primarily Young's modulus. Elastic mismatch encourages fracture deflection and arrest at contacts and increases the amount of energy needed for a large-scale edifice failure. Fracture-related hazards depend on the potential energy available to propagate the fractures which, in turn, depends on the boundary conditions during fracture propagation. Here there are two possible scenarios: one in which the outer boundary of the volcanic edifice or rift zone does not move during the fracture propagation (constant displacement; the other in which the boundary moves (constant load. In the former, the total potential energy is the strain energy stored in the volcano before fracture formation; in the latter, the total potential energy is the strain energy plus the work done by the forces moving the boundary. Constant-displacement boundary conditions favor small eruptions, landslides, and caldera collapses, whereas constant-load conditions favor comparatively large eruptions, landslides, and collapses. For a typical magma chamber (sill-like with a diameter of 8 km, the strain energy change due to magma-chamber inflation

Behaviour of the Sm-Nd and Rb-Sr systems of the mafic-ultramafic layered sequence from Ribeirao dos Motas (Archaean), meridional craton Sao Francisco: evidences of mantle source enrichment and isotopic fractionation; Comportamento dos sistemas Sm-Nd e Rb-Sr da sequencia acamadada mafico-ultramafico Ribeirao dos Motas (Arqueano), craton Sao Francisco Meridional: evidencias de enriquecimento mantelico e fracionamento isotopico

Energy Technology Data Exchange (ETDEWEB)

Carneiro, Mauricio Antonio; Carvalho Junior, Irneu Mendes de; Oliveira, Arildo Henrique de [Ouro Preto Univ., (UFOP), MG (Brazil). Dept. de Geologia]. E-mail: mauricio@degeo.ufop.br; Teixeira, Wilson [Sao Paulo Univ., SP (Brazil). Inst. de Geociencias. Dept. de Mineralogia e Geotectonica; Pimentel, Marcio Martins [Brasilia Univ., DF (Brazil). Inst. de Geociencias. Lab. de Geocronologia

2004-10-15

The Ribeirao dos Motas layered sequence (SARM) crops out in the southern part of the Sao Francisco Craton, Brazil. This sequence comprises phaneritic meta ultramafic and metamafic rocks, which, although slightly deformed and metamorphosed, retain primary igneous layers. Porphyritic rocks with idiomorphic pyroxene crystals and heteradcumulate and adcumulate textures are also present. Eighteen isotopic analyses were performed in the SARM, comprising rocks with primary (relict) textures, as well as rocks in amphibolite facies and retro-metamorphosed to green-schist facies. Seven samples yield a Sm/Nd isochron age of 2.79 +- 0.30 Ga (MSWD=1.2 e epsilon {sub Ndt}=+0.48), constraining the accretion time of the SARM rocks. The positive epsilon {sub Ndt} value coupled with the Rb/Sr evidence is consistent with mantle source relatively enriched in Nd and Sr isotopes. Nevertheless, some SARM samples display isotopic fractionation and disturbance, which can be ascribed to the following processes or their combinations: a) mobilization of the incompatible elements due to regional high grade metamorphism; b) isotopic changes during upper amphibolite facies overprint; c) isotopic resetting by low-grade fluids associated to the Claudio Shear zone, which is located nearby the SARM. (author)

COMPEREHENSIVE TECHNICAL STUDIES OF FLOOD CONTROL OVER SOLO CITY AREA (CASE STUDY IN DEMANGAN BARRAGE

Directory of Open Access Journals (Sweden)

Ali Trusharyanto

2013-05-01

Full Text Available City of Surakarta, known as Solo City is one of cities in Central Java Province traversed by Bengawan Solo River. Heavy rainfall in upstream area of Bengawan Solo River causes increase in high water level at downstream. Bengawan Solo River will be higher than water level in drainage system which may induce a backwater flow. Since Colonization era, the government has built dikes and barrages against backwater flow and inundation problem. One of the barrages was Demangan Barrage dividing river flow into Bengawan Solo River and Pepe River. It was equipped with total capacity pump of 12,3 m3/s. The inundation is not only caused by the backwater flow coming from Bengawan Solo River, but also surface runoff as the result of the excess rainfall which cannot be drained gravitationally to the main river if the gate was closed. Therefore, comprehensive study combining hydrology and hydraulics analysis is highly needed in order to achieve more effective flood control management. Hydrology analysis was done to estimate the direct runoff hydrograph from catchment area in Solo City to downstream of Pepe River. While in hydraulics case, hydraulic parameter in downstream of Pepe River influenced by Bengawan Solo River stream was analyzed. Both studies were simulated using software HEC-RAS 4.1.0 version. The simulation considered drainage channel, gate, pump system and dike in Pepe River downstream. Simulation using 10 years of return period in Solo City and average annual water level in Bengawan Solo River showed that Pepe River can flow through the gate, while the highest water level is still below the dike. Simulation considering 10 years of return period, water level hydrograph of Bengawan Solo River, existing pump, and gate operation inferred that Pepe River surpassed top of dike. Capacity of required pump should be more than 168,3 m3/s in order to pass 10 years of return period. By combining operational of existing pump and dike elevated up to +87,63 m

Using Lava Tube Skylight Thermal Emission Spectra to Determine Lava Composition on Io: Quantitative Constraints for Observations by Future Missions to the Jovian System.

Science.gov (United States)

Davies, A. G.

2008-12-01

Deriving the composition of Io's dominant lavas (mafic or ultramafic?) is a major objective of the next missions to the jovian system. The best opportunities for making this determination are from observations of thermal emission from skylights, holes in the roof of a lava tube through which incandescent lava radiates, and Io thermal outbursts, where lava fountaining is taking place [1]. Allowing for lava cooling across the skylight, the expected thermal emission spectra from skylights of different sizes have been calculated for laminar and turbulent tube flow and for mafic and ultramafic composition lavas. The difference between the resulting mafic and ultramafic lava spectra has been quantified, as has the instrument sensitivity needed to acquire the necessary data to determine lava eruption temperature, both from Europa orbit and during an Io flyby. A skylight is an excellent target to observe lava that has cooled very little since eruption (California Institute of Technology, under contract to NASA. AGD is supported by a grant from the NASA OPR Program. References: [1] Davies, A. G., 1996, Icarus, 124, 45-61. [2] Keszthelyi, L., et al., 2006, JGS, 163, 253-264. [3] Davies, A. G., 2007, Volcanism on Io, Cambridge University Press. [4] Keszthelyi, L., et al., 2007, Icarus, 192, 491-502. [5] Davies, A. G., et al., 2006, Icarus, 184, 460-477.

Surface deformation in volcanic rift zones

Science.gov (United States)

Pollard, D.D.; Delaney, P.T.; Duffield, W.A.; Endo, E.T.; Okamura, A.T.

1983-01-01

The principal conduits for magma transport within rift zones of basaltic volcanoes are steeply dipping dikes, some of which feed fissure eruptions. Elastic displacements accompanying a single dike emplacement elevate the flanks of the rift relative to a central depression. Concomitant normal faulting may transform the depression into a graben thus accentuating the topographic features of the rift. If eruption occurs the characteristic ridge-trough-ridge displacement profile changes to a single ridge, centered at the fissure, and the erupted lava alters the local topography. A well-developed rift zone owes its structure and topography to the integrated effects of many magmatic rifting events. To investigate this process we compute the elastic displacements and stresses in a homogeneous, two-dimensional half-space driven by a pressurized crack that may breach the surface. A derivative graphical method permits one to estimate the three geometric parameters of the dike (height, inclination, and depth-to-center) and the mechanical parameter (driving pressure/rock stiffness) from a smoothly varying displacement profile. Direct comparison of measured and theoretical profiles may be used to estimate these parameters even if inelastic deformation, notably normal faulting, creates discontinuities in the profile. Geological structures (open cracks, normal faults, buckles, and thrust faults) form because of stresses induced by dike emplacement and fissure eruption. Theoretical stress states associated with dilation of a pressurized crack are used to interpret the distribution and orientation of these structures and their role in rift formation. ?? 1983.

SUBJECT INDEX

Indian Academy of Sciences (India)

(Afyon-Sandıklı) geothermal systems, SW Turkey 1081. Microtremor measurements ... Analysis of carbon dioxide, water vapour and energy fluxes over an Indian ... Petrological and geochemical characteristics of Paleo- proterozoic ultramafic ...

Detailed petrographic-structural study of an outcrop of Crystalline Basement of Montevideo

International Nuclear Information System (INIS)

Pascale, A.; Oyhantçabal, P.

2010-01-01

Preliminary data analysis of detailed outcrop Punta Virgilo, located on the S E coast of the department of Montevideo are presented. The investigated outcrop includes gneisses, amphibolite s and several generations of pegmatite and aplite dikes of Paleoproterozoic metamorphic basement, plus a set of dikes emplaced lamprófido exhumed once the area. Petrographic and microstructural studies of metamorphic units allowed to determine the conditions of metamorphism and deformation temperature between 520-720 ° C and pressure between 2 and 6 kbar (depth of 10 to 23 km)

Generation, ascent and eruption of magma on the Moon: New insights into source depths, magma supply, intrusions and effusive/explosive eruptions (Part 2: Predicted emplacement processes and observations)

Science.gov (United States)

Head, James W.; Wilson, Lionel

2017-02-01

We utilize a theoretical analysis of the generation, ascent, intrusion and eruption of basaltic magma on the Moon to develop new insights into magma source depths, supply processes, transport and emplacement mechanisms via dike intrusions, and effusive and explosive eruptions. We make predictions about the intrusion and eruption processes and compare these with the range of observed styles of mare volcanism, and related features and deposits. Density contrasts between the bulk mantle and regions with a greater abundance of heat sources will cause larger heated regions to rise as buoyant melt-rich diapirs that generate partial melts that can undergo collection into magma source regions; diapirs rise to the base of the anorthositic crustal density trap (when the crust is thicker than the elastic lithosphere) or, later in history, to the base of the lithospheric rheological trap (when the thickening lithosphere exceeds the thickness of the crust). Residual diapiric buoyancy, and continued production and arrival of diapiric material, enhances melt volume and overpressurizes the source regions, producing sufficient stress to cause brittle deformation of the elastic part of the overlying lithosphere; a magma-filled crack initiates and propagates toward the surface as a convex upward, blade-shaped dike. The volume of magma released in a single event is likely to lie in the range 102 km3 to 103 km3, corresponding to dikes with widths of 40-100 m and both vertical and horizontal extents of 60-100 km, favoring eruption on the lunar nearside. Shallower magma sources produce dikes that are continuous from the source region to the surface, but deeper sources will propagate dikes that detach from the source region and ascend as discrete penny-shaped structures. As the Moon cools with time, the lithosphere thickens, source regions become less abundant, and rheological traps become increasingly deep; the state of stress in the lithosphere becomes increasingly contractional

Silurian extension in the Upper Connecticut Valley, United States and the origin of middle Paleozoic basins in the Québec embayment

Science.gov (United States)

Rankin, D.W.; Coish, R.A.; Tucker, R.D.; Peng, Z.X.; Wilson, S.A.; Rouff, A.A.

2007-01-01

Pre-Silurian strata of the Bronson Hill arch (BHA) in the Upper Connecticut Valley, NH-VT are host to the latest Ludlow Comerford Intrusive Suite consisting, east to west, of a mafic dike swarm with sheeted dikes, and an intrusive complex. The rocks are mostly mafic but with compositions ranging from gabbro to leucocratic tonalite. The suite is truncated on the west by the Monroe fault, a late Acadian thrust that carries rocks of the BHA westward over Silurian-Devonian strata of the Connecticut Valley-Gaspe?? trough (CVGT). Dikes intrude folded strata with a pre-intrusion metamorphic fabric (Taconian?) but they experienced Acadian deformation. Twenty fractions of zircon and baddeleyite from three sample sites of gabbrodiorite spanning nearly 40 km yield a weighted 207Pb/206Pb age of 419 ?? 1 Ma. Greenschist-facies dikes, sampled over a strike distance of 35 km, were tholeiitic basalts formed by partial melting of asthenospheric mantle, with little or no influence from mantle or crustal lithosphere. The dike chemistry is similar to mid-ocean ridge, within-plate, and back-arc basin basalts. Parent magmas originated in the asthenosphere and were erupted through severely thinned lithosphere adjacent to the CVGT. Extensive middle Paleozoic basins in the internides of the Appalachian orogen are restricted to the Que??bec embayment of the Laurentian rifted margin, and include the CVGT and the Central Maine trough (CMT), separated from the BHA by a Silurian tectonic hinge. The NE-trending Comerford intrusions parallel the CVGT, CMT, and the tectonic hinge, and indicate NW-SE extension. During post-Taconian convergence, the irregular margins of composite Laurentia and Avalon permitted continued collision in Newfoundland (St. Lawrence promontory) and coeval extension in the Que??bec embayment. Extension may be related to hinge retreat of the northwest directed Brunswick subduction complex and rise of the asthenosphere following slab break-off. An alternative hypothesis is

The role of magmatic loads and rift jumps in generating seaward dipping reflectors on volcanic rifted margins

Science.gov (United States)

Buck, W. Roger

2017-05-01

The largest volcanic constructs on Earth are the seismically imaged seaward dipping reflector (SDR) units found offshore of many rifted continental margins, including most that border the Atlantic Ocean. Whether their formation requires large magnitude (i.e. 10 s of km) of normal fault slip or results from the deflection of the lithosphere by the weight of volcanic flows is controversial. Though there is evidence for faulting associated with some SDRs, this paper considers the range of structures that can be produced by magmatic and volcanic loading alone. To do this an idealized mechanical model for the construction of rift-related volcanic flow structures is developed. Dikes open as plates move away from the center of a model rift and volcanic flows fill the depression produced by the load caused by dike solidification. The thin elastic plate flexure approximation allows a closed form description of the shape of both the contacts between flows and between the flows and underlying dikes. The model depends on two independent parameters: the flexure parameter, α, and the maximum isostatically supported extrusive layer thickness, w0. For reasonable values of these parameters the model reproduces the observed down-dip thickening of flows and the range of reflector dip angles. A numerical scheme using the analytic results allows simulation of the effect of temporal changes in the locus of magmatic spreading as well as changes in the amount of volcanic infill. Either jumps in the location of the center of diking or periods with no volcanism result in separate units or "packages" of model SDRs, in which the flow-dike contact dips landward, consistent with observations previously attributed only to listric normal fault offset. When jumps in the spreading center are small (i.e. less than α) they result in thicker, narrower volcanic units on one side of a rift compared to those on the other side. This is similar to the asymmetric distributions of volcanic packages seen

Seismic source dynamics of gas-piston activity at Kı̄lauea Volcano, Hawai‘i

Science.gov (United States)

Chouet, Bernard A.; Dawson, Phillip B.

2015-01-01

Since 2008, eruptive activity at the summit of Kı̄lauea Volcano, Hawai‘i has been confined to the new Overlook pit crater within the Halema‘uma‘u Crater. Among the broad range of magmatic processes observed in the new pit are recurring episodes of gas pistoning. The gas-piston activity is accompanied by seismic signals that are recorded by a broadband network deployed in the summit caldera. We use raw data recorded with this network to model the source mechanism of representative gas-piston events in a sequence that occurred on 20–25 August 2011 during a gentle inflation of the Kı̄lauea summit. To determine the source centroid location and source mechanism, we minimize the residual error between data and synthetics calculated by the finite difference method for a point source embedded in a homogeneous medium that takes topography into account. We apply a new waveform inversion method that accounts for the contributions from both translation and tilt in horizontal seismograms through the use of Green's functions representing the seismometer response to translation and tilt ground motions. This method enables a robust description of the source mechanism over the period range 1–10,000 s. Most of the seismic wavefield produced by gas-pistoning originates in a source region ∼1 km below the eastern perimeter of the Halema‘uma‘u pit crater. The observed waveforms are well explained by a simple volumetric source with geometry composed of two intersecting cracks featuring an east striking crack (dike) dipping 80°to the north, intersecting a north striking crack (another dike) dipping 65° to the east. Each gas-piston event is marked by a similar rapid inflation lasting a few minutes, trailed by a slower deflation ramp extending up to 15 min, attributed to the efficient coupling at the source centroid location of the pressure and momentum changes accompanying the growth and collapse of a layer of foam at the top of the lava column. Assuming a

An evaluation of thematic mapper simulator data for the geobotanical discrimination of rock types in Southwest Oregon

Science.gov (United States)

Weinstock, K. J.; Morrissey, L. A.

1984-01-01

Rock type identification may be assisted by the use of remote sensing of associated vegetation, particularly in areas of dense vegetative cover where surface materials are not imaged directly by the sensor. The geobotanical discrimination of ultramafic parent materials was investigated and analytical techniques for lithologic mapping and mineral exploration were developed. The utility of remotely sensed data to discriminate vegetation types associated with ultramafic parent materials in a study area in southwest Oregon were evaluated. A number of specific objectives were identified, which include: (1) establishment of the association between vegetation and rock types; (2) examination of the spectral separability of vegetation types associated with rock types; (3) determination of the contribution of each TMS band for discriminating vegetation associated with rock types and (4) comparison of analytical techniques for spectrally classifying vegetation.

Geological influence of andesite intrusion on diatomite. Pt. 2. Physical property changes of diatomite and self-sealing mechanism

Energy Technology Data Exchange (ETDEWEB)

Chigira, Masahiro; Nakata, Eiji [Central Research Inst. of Electric Power Industry, Abiko, Chiba (Japan). Abiko Research Lab.

1996-03-01

Diatomite alteration by andesite intrusion was studied especially on their physical property changes and the dynamic alteration processes for the diatomite of the Miocene Iwaya Formation in the Akita Prefecture, northern Japan. Diatomite is altered in different ways according to the extent of infiltration of hydrothermal solution into diatomite from dike. When the solution infiltrates into diatomite in large amount, smectite is formed in diatomite which is subsequently compacted to the most, and amorphous silica and poorly crystallized opal-CT precipitate in the compacted zone to form impermeable opaline chert. The chert zone becomes a hydraulic barrier against the infiltration of hydrothermal solution to make a closed system around the heat source, where opal-A transforms into opal-CT. When hydrothermal solution does not infiltrate into diatomite, diatomite is altered only by the heat from the andesitic dike: diatomite is compacted under higher temperatures near the dike, and consequently permeability is lowered. In both cases, diatomite is altered so as to mitigate the influence of magma intrusion. (author). 66 refs.

Geological influence of andesite intrusion on diatomite. Pt. 2. Physical property changes of diatomite and self-sealing mechanism

International Nuclear Information System (INIS)

Chigira, Masahiro; Nakata, Eiji

1996-01-01

Diatomite alteration by andesite intrusion was studied especially on their physical property changes and the dynamic alteration processes for the diatomite of the Miocene Iwaya Formation in the Akita Prefecture, northern Japan. Diatomite is altered in different ways according to the extent of infiltration of hydrothermal solution into diatomite from dike. When the solution infiltrates into diatomite in large amount, smectite is formed in diatomite which is subsequently compacted to the most, and amorphous silica and poorly crystallized opal-CT precipitate in the compacted zone to form impermeable opaline chert. The chert zone becomes a hydraulic barrier against the infiltration of hydrothermal solution to make a closed system around the heat source, where opal-A transforms into opal-CT. When hydrothermal solution does not infiltrate into diatomite, diatomite is altered only by the heat from the andesitic dike: diatomite is compacted under higher temperatures near the dike, and consequently permeability is lowered. In both cases, diatomite is altered so as to mitigate the influence of magma intrusion. (author). 66 refs

Analysis of Nigerian Hydrometeorological Data | Dike | Nigerian ...

African Journals Online (AJOL)

Missing records were determined by the mass curve analysis for rainfall and regression analysis for runoff involving runoff data at neighbouring site. Tests on time homogeneity, showed that the annual rainfall records at Port Harcourt, Enugu and Lokoja were stationary and random, the annual runoff records of River Niger at ...

Networking Nature, or Serengeti Behind the Dikes

NARCIS (Netherlands)

Belt, van den H.

2004-01-01

Nowadays, wildlife has no chance to be conserved and maintained without the helping hand of man. Ambitious plans to adopt an offensive rather than defensive approach to conservation by creating ‘new nature’ led to initiatives to build ecological networks, from the local, through the regional and the

Aboveground Net Primary Productivity in a Riparian Wetland Following Restoration of Hydrology.

Science.gov (United States)

Koontz, Melissa; Lundberg, Christopher; Lane, Robert; Day, John; Pezeshki, Reza

2016-02-04

This research presents the initial results of the effects of hydrological restoration on forested wetlands in the Mississippi alluvial plain near Memphis, Tennessee. Measurements were carried out in a secondary channel, the Loosahatchie Chute, in which rock dikes were constructed in the 1960s to keep most flow in the main navigation channel. In 2008-2009, the dikes were notched to allow more flow into the secondary channel. Study sites were established based on relative distance downstream of the notched dikes. Additionally, a reference site was established north of the Loosahatchie Chute where the dikes remained unnotched. We compared various components of vegetation composition and productivity at sites in the riparian wetlands for two years. Salix nigra had the highest Importance Value at every site. Species with minor Importance Values were Celtis laevigata, Acer rubrum, and Plantanus occidentalis. Productivity increased more following the introduction of river water in affected sites compared to the reference. Aboveground net primary productivity was highest at the reference site (2926 ± 458.1 g·m(-2)·year(-1)), the intact site; however, there were greater increase at the sites in the Loosahatchie Chute, where measurements ranged from 1197.7 ± 160.0 g m(-2)·year(-1)·to 2874.2 ± 794.0 g·m(-2)·year(-1). The site furthest from the notching was the most affected. Pulsed inputs into these wetlands may enhance forested wetland productivity. Continued monitoring will quantify impacts of restored channel hydrology along the Mississippi River.

Hydrodynamic and Ecological Assessment of Nearshore Restoration: A Modeling Study

International Nuclear Information System (INIS)

Yang, Zhaoqing; Sobocinski, Kathryn L.; Heatwole, Danelle W.; Khangaonkar, Tarang; Thom, Ronald M.; Fuller, Roger

2010-01-01

Along the Pacific Northwest coast, much of the estuarine habitat has been diked over the last century for agricultural land use, residential and commercial development, and transportation corridors. As a result, many of the ecological processes and functions have been disrupted. To protect coastal habitats that are vital to aquatic species, many restoration projects are currently underway to restore the estuarine and coastal ecosystems through dike breaches, setbacks, and removals. Information on physical processes and hydrodynamic conditions are critical for the assessment of the success of restoration actions. Restoration of a 160- acre property at the mouth of the Stillaguamish River in Puget Sound has been proposed. The goal is to restore native tidal habitats and estuary-scale ecological processes by removing the dike. In this study, a three-dimensional hydrodynamic model was developed for the Stillaguamish River estuary to simulate estuarine processes. The model was calibrated to observed tide, current, and salinity data for existing conditions and applied to simulate the hydrodynamic responses to two restoration alternatives. Responses were evaluated at the scale of the restoration footprint. Model data was combined with biophysical data to predict habitat responses at the site. Results showed that the proposed dike removal would result in desired tidal flushing and conditions that would support four habitat types on the restoration footprint. At the estuary scale, restoration would substantially increase the proportion of area flushed with freshwater (< 5 ppt) at flood tide. Potential implications of predicted changes in salinity and flow dynamics are discussed relative to the distribution of tidal marsh habitat.

Aboveground Net Primary Productivity in a Riparian Wetland Following Restoration of Hydrology

Directory of Open Access Journals (Sweden)

Melissa Koontz

2016-02-01

Full Text Available This research presents the initial results of the effects of hydrological restoration on forested wetlands in the Mississippi alluvial plain near Memphis, Tennessee. Measurements were carried out in a secondary channel, the Loosahatchie Chute, in which rock dikes were constructed in the 1960s to keep most flow in the main navigation channel. In 2008–2009, the dikes were notched to allow more flow into the secondary channel. Study sites were established based on relative distance downstream of the notched dikes. Additionally, a reference site was established north of the Loosahatchie Chute where the dikes remained unnotched. We compared various components of vegetation composition and productivity at sites in the riparian wetlands for two years. Salix nigra had the highest Importance Value at every site. Species with minor Importance Values were Celtis laevigata, Acer rubrum, and Plantanus occidentalis. Productivity increased more following the introduction of river water in affected sites compared to the reference. Aboveground net primary productivity was highest at the reference site (2926 ± 458.1 g·m−2·year−1, the intact site; however, there were greater increase at the sites in the Loosahatchie Chute, where measurements ranged from 1197.7 ± 160.0 g m−2·year−1·to 2874.2 ± 794.0 g·m−2·year−1. The site furthest from the notching was the most affected. Pulsed inputs into these wetlands may enhance forested wetland productivity. Continued monitoring will quantify impacts of restored channel hydrology along the Mississippi River.

Hydrodynamic Modeling Analysis for Leque Island and zis a ba Restoration Feasibility Study

Energy Technology Data Exchange (ETDEWEB)

Whiting, Jonathan M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Khangaonkar, Tarang [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-01-31

Ducks Unlimited, Inc. in collaboration with Washington State Department of Fish and Wildlife (WDFW), and Stillaguamish Tribe of Indians have proposed the restoration of Leque Island and zis a ba (formerly Matterand) sites near the mouth of Old Stillaguamish River Channel in Port Susan Bay, Washington. The Leque Island site, which is owned by WDFW, consists of nearly 253 acres of land south of Highway 532 that is currently behind a perimeter dike. The 90-acres zis a ba site, also shielded by dikes along the shoreline, is located just upstream of Leque Island and is owned by Stillaguamish Tribes. The proposed actions consider the removal or modification of perimeter dikes at both locations to allow estuarine functions to be restored. The overall objective of the proposed projects is to remove the dike barriers to 1) provide connectivity and access between the tidal river channel and the restoration site for use by juvenile migrating salmon and 2) create a self-sustaining tidal marsh habitat. Ducks Unlimited engaged Pacific Northwest National Laboratory (PNNL) to develop a three-dimensional hydrodynamic model of the Port Susan Bay, Skagit Bay, and the interconnecting Leque Island region for use in support of the feasibility assessment for the Leque Island and zis a ba restoration projects. The objective of this modeling-based feasibility assessment is to evaluate the performance of proposed restoration actions in terms of achieving habitat goals while assessing the potential hydraulic and sediment transport impacts to the site and surrounding parcels of land.

Anatomy of an intruded coal, I: Effect of contact metamorphism on whole-coal geochemistry, Springfield (No. 5) (Pennsylvanian) coal, Illinois Basin

Energy Technology Data Exchange (ETDEWEB)

Rimmer, Susan M. [Department of Geology, Southern Illinois University Carbondale, Carbondale, IL 62901 (United States); Yoksoulian, Lois E. [Department of Earth and Environmental Sciences, University of Kentucky, Lexington, KY 40506 (United States); Hower, James C. [Center for Applied Energy Research, University of Kentucky, 2540 Research Park Drive, Lexington, KY 40511 (United States)

2009-08-01

If time and heating rate are important agents in coal maturation, one might expect to see differences in chemical changes in response to maturation depending on the means of increased rank. Using a suite of samples obtained from an intruded Pennsylvanian-age coal in southern Illinois, we present whole-coal chemical data. Comparing these data to extant geochemical data for coals that have undergone normal burial maturation, we evaluated the hypothesis that if coal alteration occurs rapidly (due to intrusion) rather than gradually (burial maturation), then different relationships are seen in chemical composition (proximate and ultimate analyses) and vitrinite reflectance. The Pennsylvanian-age (Asturian [Westphalian D]) Springfield (No. 5) coal is mined at the Big Ridge Mine, near Eldorado, southern Illinois. This high volatile B bituminous coal was intruded by an ultramafic igneous intrusion during the early Permian. Alteration occurs out to {proportional_to} 1.2 x dike thickness and includes an increase in random vitrinite reflectance (R{sub m}) from levels {proportional_to} 0.7% to over 5.3%, loss of liptinites, and formation of devolatilization vacuoles and fine mosaic texture. Decreases in volatile matter (VM) and increases in fixed carbon (FC) appear to be less than would be expected for the level of reflectance seen within the alteration halo. Carbonate minerals have a major influence on proximate analyses but even following the removal of carbonates, the decrease in VM is still less than would be seen in coals of similar vitrinite reflectance that were altered by normal burial maturation. Carbonate mineralization also contributes to variability in ultimate analysis values approaching the intrusion, particularly for %C and %O. After carbonate removal, data for these coals do not appear to follow the normal burial coalification tracks when plotted on a van Krevelen diagram and on a Seyler chart. These differences suggest that a slightly different maturation

Inside the volcano: The how and why of Thrihnukagigur volcano, Iceland

Science.gov (United States)

LaFemina, Peter; Hudak, Michael; Feineman, Maureen; Geirsson, Halldor; Normandeau, Jim; Furman, Tanya

2015-04-01

The Thrihnukagigur volcano, located in the Brennisteinsfjöll fissure swarm on the Reykjanes Peninsula, Iceland, offers a unique exposure of the upper magmatic plumbing system of a monogenetic volcano. The volcano formed during a dike-fed strombolian eruption ~3500 BP with flow-back leaving an evacuated conduit, elongated parallel to the regional maximum horizontal stress. At least two vents were formed above the dike, as well as several small hornitos south-southwest of the main vent. In addition to the evacuated conduit, a cave exists 120 m below the vent. The cave exposes stacked lava flows and a buried cinder cone. The unconsolidated tephra of the cone is cross-cut by a NNE-trending dike, which runs across the ceiling of this cave to the vent that produced lava and tephra during the ~3500 BP fissure eruption. We present geochemical, petrologic and geologic observations, including a high-resolution three-dimensional scan of the system that indicate the dike intersected, eroded and assimilated unconsolidated tephra from the buried cinder cone, thus excavating a region along the dike, allowing for future slumping and cave formation. Two petrographically distinct populations of plagioclase phenocrysts are present in the system: a population of smaller (maximum length 1 mm) acicular phenocrysts and a population of larger (maximum length 10 mm) tabular phenocrysts that is commonly broken and displays disequilibrium sieve textures. The acicular plagioclase crystals are present in the dike and lavas while the tabular crystals are in these units and the buried tephra. An intrusion that appears not to have interacted with the tephra has only acicular plagioclase. This suggests that a magma crystallizing a single acicular population of plagioclase intruded the cinder cone and rapidly assimilated the tephra, incorporating the tabular population of phenocrysts from the cone. Petrographic thin-sections of lavas sampled near the vent show undigested fragments of tephra from

Magnetic properties of variably serpentinized peridotites and their implication for the evolution of oceanic core complexes

NARCIS (Netherlands)

Maffione, M.; Morris, A.; Plümper, O.|info:eu-repo/dai/nl/37155960X; van Hinsbergen, D.J.J.|info:eu-repo/dai/nl/269263624

Serpentinization of ultramafic rocks during hydrothermal alteration at mid-ocean ridges profoundly changes the physical, chemical, rheological, and magnetic properties of the oceanic lithosphere. There is renewed interest in this process following the discovery of widespread exposures of

Felsic maar-diatreme volcanoes: a review

Science.gov (United States)

Ross, Pierre-Simon; Carrasco Núñez, Gerardo; Hayman, Patrick

2017-02-01

breccias (Kelian, Mt. Rawdon). Pyroclastic rocks in the diatreme are typically poorly sorted, and ash-rich. They contain a heterolithic mix of juvenile clasts and lithic clasts from various stratigraphic levels. Megablocks derived from the ejecta ring or the country rocks are often found in the diatremes. Evidence for multiple explosions is in the form of steep crosscutting pyroclastic bodies within some diatremes and fragments of pyroclastic rocks within other pyroclastic facies. Pyroclastic rocks are cut by coherent felsic dikes and plugs which may have been feeders to lava domes at the surface. Allowing for the difference in magma composition, felsic maar-diatreme volcanoes have many similarities with their ultramafic to mafic equivalents. Differences include a common association with felsic domes, inside the crater or just outside (Wau), although the domes within the crater may be destroyed during the eruption (Hoya de Estrada, Tepexitl); the dikes and plugs feeding and invading felsic diatremes seem larger; the processes of phreatomagmatic explosions involving felsic magmas may be different.

View of an intact oceanic arc, from surficial to mesozonal levels: Cretaceous Alisitos arc, Baja California

Science.gov (United States)

Busby, Cathy; Fackler Adams, Benjamin; Mattinson, James; Deoreo, Stephen

2006-01-01

suspensions that mixed completely with water. In contrast, gentler slopes on the opposite flank allowed pyroclastic flows to enter the sea with integrity, and supported extensive buildups of bioherms. Caldera collapse on the major subaerial edifice ponded the tuff of Aguajito to a thickness of at least 3 km. The outflow ignimbrite forms a marker in nonmarine to shallow marine sections, and in deepwater sections it occurs as blocks up to 150 m long in a debris-avalanche deposit. These welded ignimbrite blocks were deposited hot enough to deform plastically and form peperite with the debris-avalanche matrix. The debris avalanche was likely triggered by injection of feeder dikes along the basin-bounding fault zone during the caldera-forming eruption. Intra-arc extension controlled very high subsidence rates, followed shortly thereafter by accretion through back-arc basin closure by 105 Ma. Accretion of the oceanic arc may have been accomplished by detachment of the upper crust along a still hot, thick middle crustal tonalitic layer, during subduction of mafic-ultramafic substrate.

New age (ca. 2970 Ma), mantle source composition and geodynamic constraints on the Archean Fiskenæsset anorthosite complex, SW Greenland

DEFF Research Database (Denmark)

Polat, A; Frei, Robert; Scherstén, Anders

2010-01-01

The Archean Fiskenæsset Complex, SW Greenland, consists of an association of ca. 550-meter-thick layered anorthosite, leucogabbro, gabbro, and ultramafic rocks (peridotite, pyroxenite, dunite, hornblendite). The complex was intruded by tonalite, trondhjemite, and granodiorite (TTG) sheets (now...... orthogneisses) during thrusting that was followed by several phases of isoclinal folding. The trace element systematics of the Fiskenæsset Complex and associated volcanic rocks are consistent with a supra-subduction zone geodynamic setting. The Fiskenæsset anorthosites, leucogabbros, gabbros and ultramafic...... rocks collectively yield an Sm–Nd errorchron age of 2973 ± 28 Ma (MSWD = 33), with an average initial eNd = + 3.3 ± 0.7, consistent with a long-term depleted mantle source. Regression of Pb isotope data define an age of 2945 ± 36 Ma (MSWD = 44); and the regression line intersects the average growth...

The 3.1 Ga Nuggihalli chromite deposits, Western Dhawar craton (India)

DEFF Research Database (Denmark)

Mukherjee, Ria; Mondal, Sisir K.; Frei, Robert

2012-01-01

The Nuggihalli greenstone belt is part of the older greenstone belts (3.4 - 3.0 Ga) in the Western Dharwar Craton, southern India. This greenstone sequence consists of conformable metavolcanic and metasedimentary supracrustal rock assemblages that belong to the Sargur Group. Sill-like ultramafic......-mafic plutonic bodies are present within these supracrustal rocks (schist rocks) which are in turn enclosed by tonalite-trondhjemite-granodiorite gneiss (TTG). The sill-like ultramafic-mafic rocks are cumulates derived from a high-Mg parental magma that are represented by chromitite-hosted serpentinite...... and tremolite-chlorite-actinolite- schist (altered peridotite), anorthosite, pyroxenite, and gabbro hosting magnetite bands. The first whole-rock Sm-Nd data for the peridotite anorthosite- pyroxenite-gabbro unit has been obtained yielding an age of 3125 ± 120 Ma (MSWD = 1.3) which is similar to reported ages...

Tailings and mineral carbonation : the potential for atmospheric CO{sub 2} sequestration

Energy Technology Data Exchange (ETDEWEB)

Rollo, H.A. [Lorax Environmental Services Ltd., Vancouver, BC (Canada); Jamieson, H.E. [Queen' s Univ., Kingston, ON (Canada). Dept. of Geological Sciences and Geological Engineering; Lee, C.A. [Dillon Consulting Ltd., Cambridge, ON (Canada)

2009-02-15

Carbon dioxide (CO{sub 2}) sequestration includes geological storage, ocean storage, organic storage, and mineral storage (mineral carbonation). This presentation discussed tailings and mineral carbonation and the potential for atmospheric CO{sub 2} sequestration. In particular, it outlined CO{sub 2} sequestration and presented a history of investigations. The Ekati Diamond Mine was discussed with particular reference to its location, geology, and processing. Other topics that were presented included mineralogy; water chemistry; modeling results; and estimates of annual CO{sub 2} sequestration. Conclusions and implications were also presented. It was concluded that ore processing at mines with ultramafic host rocks have the potential to partially offset CO{sub 2} emissions. In addition, it was found that existing tailings at ultramafic deposits may be viable source materials for CO{sub 2} sequestration by mineral carbonation. tabs., figs.

Petrogenesis of oceanic kimberlites and included mantle megacrysts: the Malaitan alnoite

International Nuclear Information System (INIS)

Neal, C.R.

1988-01-01

The study of unambiguous suboceanic mantle was facilitated by the occurrence of anomalous kimberlite-type intrusives on Malaita in the Solomon Islands. The pseudo-kimberlites were termed alnoites, and are basically mica lamprophyres with melilite in the ground mass. Alnoitic magmas were explosively intruded into the Ontong Java Plateau (OJP) 34 Ma ago. The OJP is a vastly overthickened portion of the Pacific plate which now abuts the Indo-Australian plate. Malaita is considered to be the obducted leading edge of the OJP. Initial diapiric upwelling beneath the OJP produced the proto-alnoite magma. After impingement on the rigid lithosphere, megacrysts fractionation occurred, with augites precipitating first, representing the parental magma. Sea water-altered oceanic crust, which underplated the OJP, was assimilated by the proto-alnoite magma during megacrysts fractionation

Evaluation of the exploration drilling result of TML-3, TML-4, TML-5, TML-6 at Tanah Merah sector West Kalimantan

International Nuclear Information System (INIS)

Manto-Widodo; Sartapa; Widito, P

2000-01-01

Previous researcher obvioused that the uranium favourable zone at Tanah Merah has been existed, it is oriented NW-SE. In those zones have been discovered uranium mineralizations of NW-SE orientation and sub vertical dipping. This research intend to get knowledge about the uranium geology, character and geometry of the sub surface mineralization using exploration drilling. The result shows that lithologically the area dominated by biotite quartzite which is intruded by granitic rocks and lamprophyres. The mineralization consist of uraninite/ pitchblende associated by pyrite, chalcopyrite, pyrhotite, ilmenite, molybdenite, quartz, feldsphart and biotite. It seems to be granitic related mineralization as a vein type. Surface mineralization could be correlable to those of sub surface with in the lensoid or tabular shape favourable zones. Geological reserve of those mineralization is about 157 ton U 3 O 8

Chromium isotope variations (δ53/52Cr) in mantle-derived sources and their weathering products: Implications for environmental studies and the evolution of δ53/52Cr in the Earth’s mantle over geologic time

Czech Academy of Sciences Publication Activity Database

Farkaš, J.; Chrastný, V.; Novák, M.; Čadková, E.; Pašava, J.; Chakrabarti, R.; Jacobsen, S. B.; Ackerman, Lukáš; Bullen, T. D.

2013-01-01

Roč. 123, 15 December 2013 (2013), s. 74-92 ISSN 0016-7037 Keywords : chemical weathering * chromite * chromium * isotopic composition * isotopic fractionation * mantle chemistry * mantle source * serpentine * serpentinization * ultramafic rock Subject RIV: DD - Geochemistry Impact factor: 4.250, year: 2013

Mahoma - Guaycuru project. Mining study possibilities around Mahoma - Guaycuru

International Nuclear Information System (INIS)

Coronel, N.; Techera, J.

1991-01-01

This work is about the mining study possibilities in Mahoma - Guaycuru mafic complex and the stratified ultramafic complex in the black hill area - San Jose and Colon ia town. These zones have good mining chances because of the geological environment

Magmatic ore deposits in layered intrusions - Descriptive model for reef-type PGE and contact-type Cu-Ni-PGE deposits

Science.gov (United States)

Zientek, Michael L.

2012-01-01

Layered, ultramafic to mafic intrusions are uncommon in the geologic record, but host magmatic ore deposits containing most of the world's economic concentrations of platinum-group elements (PGE) (figs. 1 and 2). These deposits are mined primarily for their platinum, palladium, and rhodium contents (table 1). Magmatic ore deposits are derived from accumulations of crystals of metallic oxides, or immiscible sulfide, or oxide liquids that formed during the cooling and crystallization of magma, typically with mafic to ultramafic compositions. "PGE reefs" are stratabound PGE-enriched lode mineralization in mafic to ultramafic layered intrusions. The term "reef" is derived from Australian and South African literature for this style of mineralization and used to refer to (1) the rock layer that is mineralized and has distinctive texture or mineralogy (Naldrett, 2004), or (2) the PGE-enriched sulfide mineralization that occurs within the rock layer. For example, Viljoen (1999) broadly defined the Merensky Reef as "a mineralized zone within or closely associated with an unconformity surface in the ultramafic cumulate at the base of the Merensky Cyclic Unit." In this report, we will use the term PGE reef to refer to the PGE-enriched mineralization, not the host rock layer. Within a layered igneous intrusion, reef-type mineralization is laterally persistent along strike, extending for the length of the intrusion, typically tens to hundreds of kilometers. However, the mineralized interval is thin, generally centimeters to meters thick, relative to the stratigraphic thickness of layers in an intrusion that vary from hundreds to thousands of meters. PGE-enriched sulfide mineralization is also found near the contacts or margins of layered mafic to ultramafic intrusions (Iljina and Lee, 2005). This contact-type mineralization consists of disseminated to massive concentrations of iron-copper-nickel-PGE-enriched sulfide mineral concentrations in zones that can be tens to hundreds

Volcanic and Tectonic Activity in the Red Sea Region (2004-2013): Insights from Satellite Radar Interferometry and Optical Imagery

KAUST Repository

Xu, Wenbin

2015-04-01

Studying recent volcanic and tectonic events in the Red Sea region is important for improving our knowledge of the Red Sea plate boundary and for regional geohazard assessments. However, limited information has been available about the past activity due to insufficient in-situ data and remoteness of some of the activity. In this dissertation, I have used satellite remote sensing to derive new information about several recent volcanic and tectonic events in the Red Sea region. I first report on three volcanic eruptions in the southern Red Sea, the 2007-8 Jebel at Tair eruption and the 2011-12 & 2013 Zubair eruptions, which resulted in formation of two new islands. Series of high- resolution optical images were used to map the extent of lava flows and to observe and analyze the growth and destructive processes of the new islands. I used Interferometric Synthetic Aperture Radar (InSAR) data to study the evolution of lava flows, to estimate their volumes, as well as to generate ground displacements maps, which were used to model the dikes that fed the eruptions. I then report on my work of the 2009 Harrat Lunayyir dike intrusion and the 2004 Tabuk earthquake sequence in western Saudi Arabia. I used InSAR observations and stress calculations to study the intruding dike at Harrat Lunayyir, while I combined InSAR data and Bayesian estimation to study the Tabuk earthquake activity. The key findings of the thesis are: 1) The recent volcanic eruptions in the southern Red Sea indicate that the area is magmatically more active than previously acknowledged and that a rifting episode has been taken place in the southern Red Sea; 2) Stress interactions between an ascending dike intrusion and normal faulting on graben-bounding faults above the dike can inhibit vertical propagation of magma towards the surface; 3) InSAR observations can improve locations of shallow earthquakes and fault model uncertainties are useful to associate earthquake activity with mapped faults; 4). The

Granitoids of the Dry Valleys area, southern Victoria Land, Antarctica : plutons, field relationships, and isotopic dating

International Nuclear Information System (INIS)

Allibone, A.H.; Cox, S.C.; Johnstone, R.D.

1993-01-01

Detailed mapping throughout much of the Dry Valleys area indicates the region is underlain by 15 major granitoid plutons and numerous smaller plugs and dikes. Intrusive relationships of these plutons and dikes indicate repeated intrusion of superficially similar granitoids at different times. Sufficient internal lithologic variation occurs within individual plutons, to allow correlation with several of the previously defined granitoid units based on lithologic character. Consequently, previous subdivision schemes based on lithology are no longer tenable and are here replaced with a subdivision scheme based on the identification of individual plutons. The elongate, concordant Bonney, Denton, Cavendish, and Wheeler Plutons, which range in composition between monzodiorite and granodiorite, are the oldest relatively undeformed plutons in the Dry Valleys area. Each pluton is characterised by flow alignment of K-feldspar megacrysts, hornblende, biotite, and mafic enclaves. Field relationships and radiometric dating indicate these are deep-level plutons, emplaced synchronous with upper amphibolite facies metamorphism of the adjacent Koettlitz Group between 589 and 490 Ma ago. Elongate, discordant plutons of equigranular homogeneous biotite granodiorite and granite (Hedley, Valhalla, St Johns, Suess) were subsequently emplaced by stoping at a relatively high crustal level at 490 Ma. These eight plutons are cut by numerous swarms of Vanda mafic and felsic porphyry dikes. The ovoid, discordant, high level Pearse, Nibelungen, Orestes, Brownworth, Swinford, and Harker Plutons, emplaced between c. 486 and 477 Ma, display mutually crosscutting relationships with the youngest of the Vanda dikes. These younger plutons range in composition between monzonite and granite. Some are characterised by K-feldspar megacrystic textures superficially similar to some of the oldest concordant plutons. (author). 57 refs.; 2 tabs.; 4 figs

Design/Installation and Structural Integrity Assessment of the Bethel Valley Low-Level Waste Collection and Transfer System Upgrade for Building 3544 (Process Waste Treatment Plant) at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1996-12-01

This document describes and assesses planned modifications to be made to the Building 3544 Process Waste Treatment Plant of the Oak Ridge National Laboratory, Oak Ridge, Tennessee. The modifications are made in response to the requirements of the Federal Facility Agreement (FFA) relating to environmental protection requirements for tank systems. The modifications include the provision of a new double contained LLW line replacing an existing buried line that does not provide double containment. This new above ground, double contained pipeline is provided to permit discharge of treated process waste fluid to an outside truck loading station. The new double contained discharge line is provided with leak detection and provisions to remove accumulated liquid. An existing LLW transfer pump, concentrated waste tank, piping and accessories are being utilized, with the addition of a secondary containment system comprised of a dike, a chemically resistant internal coating on the diked area surfaces and operator surveillance on a daily basis for the diked area leak detection. This assessment concludes that the planned modifications comply with applicable requirements of Federal Facility Agreement, Docket No. 89-04-FF, covering the Oak Ridge Reservation

Storage tank catchbasins at the Esso (S. A. F. ) Refinery in Fos-sur-Mer were made liquid-tight

Energy Technology Data Exchange (ETDEWEB)

Poteur, M; Magne, R

1978-12-01

The storage tank catch basins at the Esso (S.A.F.) Refinery in Fos-sur-Mer were made liquid-tight to prevent potential ground water pollution by leakage of petroleum product tanks, such as had occurred at this plant in Nov. 1976. Economic and technological studies showed that the sealing of a dike could best be achieved by incorporating, via injection and compaction by vibration, a thin, vertical, compliant, continuous clay-cement shield along the axis of the dike rather than by lining it with concrete, asphalt, or plastic sheets. About 13 km of dikes were treated by this technique, and a grout shield with an average depth of 3.5 m and a vertical surface of 45,000 sq m was constructed in just six months (Feb.-Aug. 1978). Tests showed that the permeability coefficient, relative to water and gasoline, of this grout shield did not exceed 0.00001 cm/sec or 1Vertical Bar3< of the value for peat. This method can also be used to seal off the subsoil of an entire refinery or other industrial plant from its surroundings.

Effectiveness of distributed temperature measurements for early detection of piping in river embankments

Science.gov (United States)

Bersan, Silvia; Koelewijn, André R.; Simonini, Paolo

2018-02-01

Internal erosion is the cause of a significant percentage of failure and incidents involving both dams and river embankments in many countries. In the past 20 years the use of fibre-optic Distributed Temperature Sensing (DTS) in dams has proved to be an effective tool for the detection of leakages and internal erosion. This work investigates the effectiveness of DTS for dike monitoring, focusing on the early detection of backward erosion piping, a mechanism that affects the foundation layer of structures resting on permeable, sandy soils. The paper presents data from a piping test performed on a large-scale experimental dike equipped with a DTS system together with a large number of accompanying sensors. The effect of seepage and piping on the temperature field is analysed, eventually identifying the processes that cause the onset of thermal anomalies around piping channels and thus enable their early detection. Making use of dimensional analysis, the factors that influence this thermal response of a dike foundation are identified. Finally some tools are provided that can be helpful for the design of monitoring systems and for the interpretation of temperature data.

Si-metasomatism in serpentinized peridotite: The effects of talc-alteration on strontium and boron isotopes in abyssal serpentinites from Hole 1268a, ODP Leg 209

Science.gov (United States)

Harvey, Jason; Savov, Ivan P.; Agostini, Samuele; Cliff, Robert A.; Walshaw, Richard

2014-02-01

Ultramafic rocks recovered from Hole 1268a, Ocean Drilling Program Leg 209, to the south of the 15°20‧N Fracture Zone on the Mid-Atlantic ridge have experienced a complex history of melt depletion and subsequent interaction with a series of fluids under varying temperature and pH conditions. After intense melt depletion, varying degrees of serpentinization at 100-200 °C took place, initially under seawater-like pH conditions. Subsequently, interaction with a higher temperature (300-350 °C) fluid with low (4-5) pH and low MgO/SiO2 resulted in the heterogeneous alteration of these serpentinites to talc-bearing ultramafic lithologies. The proximity of the currently active, high temperature Logatchev hydrothermal field, located on the opposite flank of the Mid-Atlantic ridge, suggests that unlike more distal localities sampled during ODP Leg 209, Hole 1268a has experienced Si-metasomatism (i.e. talc-alteration) by a Logatchev-like hydrothermal fluid. Serpentinite strontium isotope ratios were not materially shifted by interaction with the subsequent high-T fluid, despite the likelihood that this fluid had locally interacted with mid-ocean ridge gabbro. 87Sr/86Sr in the ultramafic lithologies of Hole 1268a are close to that of seawater (c.0.709) and even acid leached serpentinites retain 87Sr/86Sr in excess of 0.707, indistinguishable from Logatchev hydrothermal fluid. On the other hand, boron isotope ratios appear to have been shifted from seawater-like values in the serpentinites (δ11B = c.+40‰) to much lighter values in talc-altered serpentinites (δ11B = +9 to +20‰). This is likely a consequence of the effects of changing ambient pH and temperature during the mineralogical transition from serpentine to talc. Heterogeneous boron isotope systematics have consequences for the composition of ultramafic portions of the lithosphere returned to the convecting mantle by subduction. Inhomogeneities in δ11B, [B] and mineralogy introduce significant uncertainties in

Mineralogy of Surface Serpentinite Outcrops in the Coast Range Ophiolite: Implications for the Deep Biosphere and Astrobiology

Science.gov (United States)

Mccann, A. R.; Cardace, D.; Carnevale, D.; Ehlmann, B. L.

2011-12-01

California contains a number of ultramafic (Fe- and Mg rich) rock bodies, including the Coast Range Ophiolite, a block of oceanic crust and upper mantle tectonically emplaced onto land. These ultramafic rocks are primarily composed of olivine and pyroxene, both of which are stable at the high temperatures and pressures in the deep subsurface where they crystallize but become unstable at low temperature and low pressure conditions near the surface. They are highly reduced rocks, creating chemical disequilibria, which can theoretically provide energy to chemoautotrophic organisms. Serpentinization (serpentine-forming) reactions between the rocks and water produce hydrogen molecules, which can be metabolized by diverse organisms. Earth and Mars have shown evidence of similar early geologic histories, possibly with widespread reducing habitable environments (Schulte et al., 2006). Recent data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) have shown serpentine-bearing outcrops near Nili Fossae (21 N, 282 W) and elsewhere in Mars' cratered highlands. Serpentine-bearing outcrops are rare, but their presence confirms that such systems involving the aqueous alteration of ultramafic rocks were active in the past (specifically during the Noachian epoch (older than ~3.7 billion years), possibly producing aqueous habitats suitable for chemoautotrophic life (Ehlmann et al., 2010). Remotely sensed data cannot confirm whether there is active serpentinization on Mars, however exposed, presently serpentinizing ultramafics in terrestrial ophiolites such as those of the California Coast Range provide points of comparison for similar Martian rocks. Volume expansion during serpentinization fractures the host rock, exposing new reaction surfaces, allowing further serpentinization. If subsurface liquid water is present on Mars, serpentinization may still be occurring. We will provide x-ray diffraction and petrographic data for surface serpentinites from the Coast

Physiological and genomic features of highly alkaliphilic hydrogen-utilizing Betaproteobacteria from a continental serpentinizing site

NARCIS (Netherlands)

Suzuki, S.; Kuenen, J.G.; Schipper, K.; van der Velde, S.; Ishii, S.; Wu, A.; Sorokin, D.Y.; Tenney, A.; Meng, X.Y.; Morrill, P.L.; Kamagata, Y.; Muyzer, G.; Nealson, K.H.

2014-01-01

Serpentinization, or the aqueous alteration of ultramafic rocks, results in challenging environments for life in continental sites due to the combination of extremely high pH, low salinity and lack of obvious electron acceptors and carbon sources. Nevertheless, certain Betaproteobacteria have been

Publications - IC 46 | Alaska Division of Geological & Geophysical Surveys

Science.gov (United States)

quality and completeness of the information in these annual reports is dependent on input from all members ; Salcha River; Sand and Gravel; Scheelite; Sericite; Seward Peninsula; Shotgun; Shulin Lake; Silica North; Turbidites; Ultramafic; Usibelli Mine; Vein Deposit; Volcanogenic Massive Sulfide; Water Quality

Hydrothermal circulation, serpentinization, and degassing at a rift valley-fracture zone intersection: Mid-Atlantic Ridge near 15[degree]N, 45[degree]W

Energy Technology Data Exchange (ETDEWEB)

Rona, P.A.; Nelson, T.A. (National Oceanic and Atmospheric Administration, Miami, FL (United States)); Bougault, H.; Charlou, J.L.; Needham, H.D. (Inst. Francais de Recherche pour I' Exploitation de la Mer, Centre de Brest (France)); Appriou, P. (Univ. of Western Brittany, Brest (France)); Trefry, J.H. (Florida Inst. of Technology, Melbourne (United States)); Eberhart, G.L.; Barone, A. (Lamont-Doherty Geological Observatory, Palisades, NY (United States))

1992-09-01

A hydrothermal system characterized by high ratios of methane to both manganese and suspended particulate matter was detected in seawater sampled at the eastern intersection of the rift valley of the Mid-Atlantic Ridge with the Fifteen-Twenty Fracture Zone. This finding contrasts with low ratios in black smoker-type hydrothermal systems that occur within spreading segments. Near-bottom water sampling coordinated with SeaBeam bathymetry and camera-temperature tows detected the highest concentrations of methane at fault zones in rocks with the appearance of altered ultramafic units in a large dome that forms part of the inside corner high at the intersection. The distinct chemical signatures of the two types of hydrothermal systems are inferred to be controlled by different circulation pathways related to reaction of seawater primarily with ultramafic rocks at intersections of spreading segments with fracture zones but with mafic rocks within spreading segments.

Global Carbon Cycle of the Precambrian Earth

DEFF Research Database (Denmark)

Wiewióra, Justyna

The carbon isotopic composition of distinct Archaean geological records provides information about the global carbon cycle and emergence of life on early Earth. We utilized carbon isotopic records of Greenlandic carbonatites, diamonds, graphites, marbles, metacarbonates and ultramafic rocks...... in the surface environment and recycled back into the mantle In the third manuscript we investigate the carbon cycle components, which have maintained the carbon isotope composition of the mantle constant through time. Assuming constant organic ratio of the total carbon burial (f), we show that increased.......1‰) and metacarbonate ( -6.1 ± 0.1‰ to +1.5 ± 0.0‰) rocks from the ~3.8 Ga Isua Supracrustal Belt as resulting from the Rayleigh distillation process, which affected the ultramafic reservoir with initial δ13C between -2‰ and 0‰. Due to its high primary δ13C signature, carbon in the Isuan magnesite was most likely...

Integrated geophysical surveys for searching of podiform chromite in Albania

Energy Technology Data Exchange (ETDEWEB)

Kospiri, Aleksander; Zajmi, Asim [Geophysical and Geochemical Center, Tirana (Albania)

1995-12-31

The purpose of this paper is to describe the application of geophysical methods to the search for chromite in Albania. Albania is well known for its chromite resources and ranks third amongst world producers of high-quality chromite. The ultramafic massif of Bulqiza, is the most important chromite bearing one. Surveying a surface of about 120 square kilometers (30% of massifs area) in that massif with integrated geophysical methods a considerable number of targets has been discovered, from which some are already objects under mine activity. In the integrated methods for chromite exploration in Bulqiza ultramafic massif are included: geological, gravity, magnetic and electrical mapping of the scale 1:2000 with survey grids 40x20m, 20x5m. Based on the interpretations of geophysical exploration were projected drilling which led to the discovery of some big ore deposits. (author). 12 refs., 3 figs

Deformation associated to exhumation of serpentinized mantle rocks in a fossil Ocean Continent Transition: The Totalp unit in SE Switzerland

Science.gov (United States)

Picazo, S.; Manatschal, G.; Cannat, M.; Andréani, M.

2013-08-01

Although the exhumation of ultramafic rocks in slow and ultraslow spreading Mid-Ocean Ridges and Ocean Continent Transitions (OCTs) has been extensively investigated, the deformation processes related to mantle exhumation are poorly constrained. In this paper we present a new geological map and a section across the exhumed serpentinized peridotites of the Totalp unit near Davos (SE Switzerland), and we propose that the Totalp unit is formed by two Alpine thrust sheets. Geological mapping indicates local exposure of a paleo-seafloor that is formed by an exhumed detachment surface and serpentinized peridotites. The top of the exhumed mantle rocks is made of ophicalcites that resulted from the carbonation of serpentine under static conditions at the seafloor. The ophicalcites preserve depositional contacts with Upper Jurassic to Lower Cretaceous pelagic sediments (Bernoulli and Weissert, 1985). These sequences did not exceed prehnite-pumpellyite metamorphic facies conditions, and locally escaped Alpine deformation. Thin mylonitic shear zones as well as foliated amphibole-bearing ultramafic rocks have been mapped. The age of these rocks and the link with the final exhumation history are yet unknown but since amphibole-bearing ultramafic rocks can be found as clasts in cataclasites related to the detachment fault, they pre-date detachment faulting. Our petrostructural study of the exhumed serpentinized rocks also reveals a deformation gradient from cataclasis to gouge formation within 150 m in the footwall of the proposed paleo-detachment fault. This deformation postdates serpentinization. It involves a component of plastic deformation of serpentine in the most highly strained intervals that has suffered pronounced grain-size reduction and a polyphase cataclastic overprint.

Socio-economic Evaluation Of Different Alternatives For Flood Protection Within The Rivierenland-project

Science.gov (United States)

Boot, S. P.; van Ast, J. A.

The Netherlands have a tradition of protecting land against flooding from the main rivers Rhine, Meuse and Scheldt by means of an extensive system of dikes. In recent years, however, this approach to protection has been increasingly questioned with re- gard to its sustainability and cost-effectiveness. The argument is that although the continued elevation of dikes may be technically feasible, there are several disadvan- tages to this approach. Firstly, a vast network of dikes requires a very high degree of organisation of water management, in which mistakes can not be afforded. Such a high degree of organisation may not always be maintainable in the future, due to changed economic or political circumstances. Secondly, it may not be the most cost- effective system for maintaining safety in the long term. Thirdly, it may not be the most desirable approach in terms of sustainability. One of the alternatives to contin- ued dike-elevation is the concept 'room for the river' ('ruimte voor de rivier'), which aims to give more space to rivers in the horizontal in stead of the vertical dimen- sion. This approach would reduce the risk of flooding, defined as the product of the probability and the consequences of flooding. In order to explore the long term con- sequences of both alternatives ('dike elevation' and 'room for the river'), the ministry of Verkeer en Waterstaat (Public Works, Transport and Water Management) started the 'Rivierenland'-project. The comparison of the alternatives mentioned was based on a fictitious project to adjust a region of The Netherlands, between the rivers Rhine and Meuse, to the concept of 'room for water'. The consequence of this adjustment would be that safety within that region would no longer be safeguarded by dikes, but by adjusting daily life to the 'demands of the water'. Part of the 'Rivierenland'-project was an analysis of the socio-economic costs and benefits of the alternative approaches. Within this analysis, a study was performed

Compositional variations in the Mesoarchean chromites of the Nuggihalli schist belt, Western Dharwar Craton (India)

DEFF Research Database (Denmark)

Mukherjee, Ria; Mondal, Sisir Kanti; Rosing, Minik Thorleif

2010-01-01

in silicate-rich chromitite (similar to 50% modal chromite) and serpentinite (similar to 2% modal chromite) throughout the entire ultramafic sequence. However, the primary composition of chromite is preserved in the massive chromitites (similar to 60-75% modal chromite) from the Byrapur and the Bhaktarhalli...

A conceptual hydrogeological model of ophiolitic aquifers (serpentinised peridotite): The test example of Mt. Prinzera (Northern Italy)

NARCIS (Netherlands)

Segadelli, Stefano; Vescovi, Paolo; Ogata, Kei; Chelli, Alessandro; Zanini, Andrea; Boschetti, Tiziano; Petrella, Emma; Toscani, Lorenzo; Gargini, Alessandro; Celico, Fulvio

2017-01-01

© 2016 John Wiley & Sons, Ltd.The main aim of this study is the experimental analysis of the hydrogeological behaviour of the Mt. Prinzera ultramafic massif in the northern Apennines, Italy. The analysed multidisciplinary database has been acquired through (a) geologic and structural survey; (b)

The Jiaodong gold district, northeastern China, in the context of the Late Paleozoic and Late Mesozoic large igneous provinces, orogeny and metallogeny in Eurasia

NARCIS (Netherlands)

de Boorder, Hugo

The Permo-Triassic continental large igneous provinces (LIPs) of Eurasia linked in to orogenic systems in decay. Their bulk appearance varies from the massive flood-basalts and (ultra)mafic intrusives to the groups of coeval, widely spread, diverse intrusions and extrusions of the Scattered Igneous

New exploration methods for platinum and rhodium deposits poor in base-metal sulphides

DEFF Research Database (Denmark)

Ohnenstetter, M.; Johan, Z.; Cocherie, A.

1999-01-01

Platinum-group elements (PGE) are typically associated with mafic and ultramafic intrusive rocks and the main exploration targets are layers and zones rich in PGE-bearing sulphides. Some PGE occurences, however, are in sulphide-poor situations and this raises the possibility that PGE deposits may...

Geochemical characteristics of granitoids and related mafic granulites from the Pan-African Dahomeyide belt, southeastern Ghana

International Nuclear Information System (INIS)

Aidoo, F.

2012-07-01

The Dahorneyide orogenic belt marks the southeastern limit of the West Africa craton (WAC). The belt consists of three structural units which include the deformed eastern edge of the WAC with its cover rocks made up of the Togo and the Buern Structural Units (external nappes), a suture zone assemblage of mafic and ultramafic rocks, and granitoid gneiss-rnigmatite assemblages (east of the suture zone). Geochemical and petrographic characteristics of the granitoids from the external nappes and mafic and ultramafic granulites roeks from the suture zone have been studied with the objective of inferring their petrogenesis and tectonic setting in which they were formed. Twenty five (25) representative samples were selected for petrographic studies and fifteen samples for major and trace elements composition using ICP-AES and ICP-MS respectively. The granitoids gneisses are mainly biotite muscovite gneisses, migmatites and granodiorites made up of quartz (25-68%), biotite (7-30%), plagioclase (8-40%), muscovite (4-20%) with some few pyroxene, sericite and calcite observed in some oF the samples. Within these rocks is an amphibole rich gneiss composed of about 45% amphiboles. The granitoid gneisses contain SiO 2 content of 40.60-68.90 wt. % with low Mg# of 36-46. Geochernically, they are classified as I-type, mctaluminous to peraluminous, magnessian to ferroan, calcic to calc alkali granitoids. They exhibit fractionated REE patterns with (La/Sm) N = 1.80-5.85 and (La/Yb) N = 3.76-76.30, and negative to positive Eu anomalies (Eu/Eu*'' = 0.68-2.10. The primitive mantle-normalised, trace element patterns show that the granitoid gneisses are characterised by enrichment in LILE relative to HFSE and in LREE relative HREE. They display subduction-related trace element characteristics of positive Ba and negative Ti, Ta, Nb and Hf anomalies. The mafic granulites are composed of quartz (16-43%), hornblende (12-45%), plagioclase (13-23%), pyroxene (13-17%), garnet (4

Storage of oil above ground for underground: Regulations, costs, and risks

International Nuclear Information System (INIS)

Lively-Diebold, B.; Driscoll, W.; Ameer, P.; Watson, S.

1993-01-01

Some owners of underground storage tank systems (USTs) appear to be replacing their systems with aboveground storage tank systems (ASTs) without full knowledge of the US Government environmental regulations that apply to facilities with ASTs, and their associated costs. This paper discusses the major federal regulatory requirements for USTs and ASTS, and presents the compliance costs for new tank systems that range in capacity from 1,000 to 10,000 gallons. The costs of two model UST system and two model AST systems are considered for new oil storage capacity, expansion of existing capacity, and replacement of an existing UST or AS T. For new capacity, ASTs are less expensive than USTs, although ASTs do have significant regulatory compliance costs that range from an estimated $8,000 to $14,000 in present value terms, depending on the size and type of system. For expanded or replacement capacity, ASTs are in all but one case less expensive than USTS; the exception is the expansion of capacity at an existing UST facility. In this case, the cost of a protected steel tank UST system is comparable to the cost of an AST system. Considering the present value of all costs over a 30 year useful life, the cost for an AST with a concrete dike is less than the cost of an AST with an earthen dike, for the tank sizes considered. This is because concrete dikes are cost competitive for small tanks, and the costs to clean up a release are higher for earthen dikes, due to the cost of disposal and replacement of oil-contaminated soil. The cost analyses presented here are not comprehensive, and are intended primarily for illustrative purposes. Only the major costs of tank purchase, installation, and regulatory compliance were considered

Analysis of the Nuevo Leon magnetic anomaly and its possible relation to the Cerro Prieto magmatic-hydrothermal system

Energy Technology Data Exchange (ETDEWEB)

Goldstein, N.E.; Wilt, M.J.; Corrigan, D.J.

1982-10-01

The broad dipolar magnetic anomaly whose positive peak is centered near Ejido Nuevo Leon, some 5 km east of the Cerro Prieto I Power Plant, has long been suspected to have a genetic relationship to the thermal source of the Cerro Prieto geothermal system. This suspicion was reinforced after several deep geothermal wells, drilled to depths of 3 to 3.5 km over the anomaly, intersected an apparent dike-sill complex consisting mainly of diabase but with minor rhyodacite. A detailed fit of the observed magnetic field to a computer model indicates that the source may be approximated by a tabular block 4 by 6 km in area, 3.7 km in depth, 2.3 km thick, and dipping slightly to the north. Mafic dike chips from one well, NL-1, were analyzed by means of electron microprobe analyses which showed tham to contain a titanomagnetite that is paramagnetic at in-situ temperature conditions. As the dike mineralogy does not account for the magnetic anomaly, the magnetic source is believed to be a deeper, magnetite-rich assemblage of peridotite-gabbro plutons. the suite of igneous rocks was probably passively emplaced at a shallow depth in response to crustal extension and thinning brought on by strike-slip faulting. The bottom of the magnetic source body, at an estimated depth of 6 km, is presumed to be at or near that of the Curie isotherm (575/sup 0/C) for magnetite, the principal ferromagnetic mineral in peridotitic-gabbroic rocks. The geological model derived from the magnetic study is generally supported by other geophysical data. In particular, earthquake data suggest dike injection is occurring at depths of 6 to 11 km in an area beneath the magnetic source. Thus, it is possible that heat for the geothermal field is being maintained by continuing crustal extension and magmatic activity.

Differences in sedge fen vegetation upstream and downstream from a managed impoundment

Science.gov (United States)

Kowalski, Kurt P.; Wilcox, Douglas A.

2003-01-01

The U.S. Fish and Wildlife Service proposed the restoration of wetlands impacted by a series of drainage ditches and pools located in an extensive undeveloped peatland in the Seney National Wildlife Refuge, Michigan. This study examined the nature and extent of degradation to the Marsh Creek wetlands caused by alteration of natural hydrology by a water-storage pool (C-3 Pool) that intersects the Marsh Creek channel. We tested the hypothesis that a reduction in moderate-intensity disturbance associated with natural water-level fluctuations below the C-3 dike contributed to lower species richness, reduced floristic quality and a larger tree and shrub component than vegetation upstream from the pool. Wetland plant communities were sampled quantitatively and analyzed for species richness, floristic quality and physiognomy. Aerial photographs, GIS databases and GPS data contributed to the characterization and analysis of the Marsh Creek wetlands. Results showed that there was lower species richness in vegetated areas downstream from the pool, but not the anticipated growth in shrubs. Wetland vegetation upstream and downstream from the pool had similar floristic quality, except for a greater number of weedy taxa above the pool. Seepage through the pool dike and localized ground-water discharge created conditions very similar to those observed around beaver dams in Marsh Creek. In essence, the dike containing the C-3 Pool affected hydrology and wetland plant communities in a manner similar to an enormous beaver dam, except that it did not allow seasonal flooding episodes to occur. Management actions to release water from the pool into the original Marsh Creek channel at certain times and in certain amounts that mimic the natural flow regime would be expected to promote greater plant species richness and minimize the negative impacts of the dike.

Leaching properties of substances from marine-deposited combustion wastes; Stofudvaskning fra marint deponerede forbraendingsrester

Energy Technology Data Exchange (ETDEWEB)

Aagaard Hansen, E; Hjelmar, O

1992-09-01

During the period 1986-1991/92, approximately 640,000 tons of coal fly ash (CFA) and 535,000 tons of municipal solid waste incinerator (MSWI) ash (fly ash and bottom ash) have been used as a filling material in a land reclamation disposal site at a new coal-fired power plant at Avedoere, Denmark. A shallow coastal area of a maximum water depth of ca. 2 m was surrounded by dikes and gradually filled up by backtipping the combustion residues to a total height of 2-3 m above sea level. The dikes and the bottom of the site are water-permeable and a top cover of clay restricts the infiltration of precipitaion into the finalized parts of the site. The leaching and hydraulic properties of the depositied residues were investigated in order to provide and estimate of the emission of selected trace elements. The results are given in detail. The composition of the leachates collected from various parts of the site appear to a certain degree to reflect the type of residues deposited. Relatively high concentrations of NVOC and ammonia-N were found in the leachates from deposited MSWI ash, whereas the presence of measurable concentrations of Cr appeared only in areas containing CFA without MSWI ash. Significant differences were found between residue permeabilities determined in the field (higher) and in the laboratory (lower). One field measurement gave a permeability of ca. 10{sup -5} m/s for deposited CFA. This may have a serious impact on future evaluations of hydraulic conditions in coal fly ash disposal sites. It is recommended that it should be ensured that water displaced from the diked area will pass through deposited residues before it flows through the bottom and/or the dikes. (AB).

Leaching properties of substances from marine-deposited combustion wastes. Stofudvaskning fra marint deponerede forbraendingsrester

Energy Technology Data Exchange (ETDEWEB)

Aagaard Hansen, E; Hjelmar, O

1992-09-01

During the period 1986-1991/92, approximately 640,000 tons of coal fly ash (CFA) and 535,000 tons of municipal solid waste incinerator (MSWI) ash (fly ash and bottom ash) have been used as a filling material in a land reclamation disposal site at a new coal-fired power plant at Avedoere, Denmark. A shallow coastal area of a maximum water depth of ca. 2 m was surrounded by dikes and gradually filled up by backtipping the combustion residues to a total height of 2-3 m above sea level. The dikes and the bottom of the site are water-permeable and a top cover of clay restricts the infiltration of precipitaion into the finalized parts of the site. The leaching and hydraulic properties of the depositied residues were investigated in order to provide and estimate of the emission of selected trace elements. The results are given in detail. The composition of the leachates collected from various parts of the site appear to a certain degree to reflect the type of residues deposited. Relatively high concentrations of NVOC and ammonia-N were found in the leachates from deposited MSWI ash, whereas the presence of measurable concentrations of Cr appeared only in areas containing CFA without MSWI ash. Significant differences were found between residue permeabilities determined in the field (higher) and in the laboratory (lower). One field measurement gave a permeability of ca. 10[sup -5] m/s for deposited CFA. This may have a serious impact on future evaluations of hydraulic conditions in coal fly ash disposal sites. It is recommended that it should be ensured that water displaced from the diked area will pass through deposited residues before it flows through the bottom and/or the dikes. (AB).

Quantitative flood risk assessment for Polders

International Nuclear Information System (INIS)

Manen, Sipke E. van; Brinkhuis, Martine

2005-01-01

In the Netherlands, the design of dikes and other water retaining structures is based on an acceptable probability (frequency) of overtopping. In 1993 a new safety concept was introduced based on total flood risk. Risk was defined as the product of probability and consequences. In recent years advanced tools have become available to calculate the actual flood risk of a polder. This paper describes the application of these tools to an existing lowland river area. The complete chain of calculations necessary to estimate the risk of flooding of a polder (or dike ring) is presented. The difficulties in applying the present day tools and the largest uncertainties in the calculations are shown

Quantitative flood risk assessment for Polders

Energy Technology Data Exchange (ETDEWEB)

Manen, Sipke E. van [Ministry of Transport, Public Works and Water Management, Bouwdienst Rijkswaterstaat, Griffioenlaan 2, Utrecht 3526 (Netherlands)]. E-mail: s.e.vmanen@bwd.rws.minvenw.nl; Brinkhuis, Martine [Ministry of Transport, Public Works and Water Management, Delft (Netherlands)

2005-12-01

In the Netherlands, the design of dikes and other water retaining structures is based on an acceptable probability (frequency) of overtopping. In 1993 a new safety concept was introduced based on total flood risk. Risk was defined as the product of probability and consequences. In recent years advanced tools have become available to calculate the actual flood risk of a polder. This paper describes the application of these tools to an existing lowland river area. The complete chain of calculations necessary to estimate the risk of flooding of a polder (or dike ring) is presented. The difficulties in applying the present day tools and the largest uncertainties in the calculations are shown.

Determining baseline element composition of lichens. II. Hypogymnia enteromorpha and Usnea spp. at Redwood National Park, California

Science.gov (United States)

Gough, L.P.; Jackson, L.L.; Sacklin, J.A.

1988-01-01

Hypogymnia enteromorpha and Usnea spp. were collected in the Little Bald Hills ultramafic region of Redwood National Park, California, to establish element-concentration norms. Baselines are presented for Ba, Ca, Cu, Mn, Ni, P, Sr, V, and Zn for both lichen species; for Li, Mg, and K for H. enteromorpha; and for Al, Ce, Cr, Co, Fe, Na, and Ti for Usnea. Element concentrations of future collections of this same material can be used to monitor possible air quality changes anticipated from mining activities planned nearby. The variability in the element concentrations was partitioned between geographical distance increments and sample preparation and analysis procedures. In general, most of this variability was found in samples less than a few hundreds of meters apart rather than those at about 1 km apart. Therefore, except for Ba and Co, no large geographical element-concentration trends were observed. Samples of both species contained elevated levels of Ni and Mg, which probably reflect the ultramafic terrain over which they occur.

Gravimetric structure for the abyssal mantle massif of Saint Peter and Saint Paul peridotite ridge, Equatorial Atlantic Ocean, and its relation to active uplift

Directory of Open Access Journals (Sweden)

KENJI F. MOTOKI

2014-06-01

Full Text Available This paper presents gravimetric and morphologic analyses based on the satellite-derived data set of EGM2008 and TOPEX for the area of the oceanic mantle massif of the Saint Peter and Saint Paul peridotite ridge, Equatorial Atlantic Ocean. The free-air anomaly indicates that the present plate boundary is not situated along the longitudinal graben which cuts peridotite ridge, but about 20 km to the north of it. The high Bouguer anomaly of the peridotite ridge suggests that it is constituted mainly by unserpentinised ultramafic rocks. The absence of isostatic compensation and low-degree serpentinisation of the ultramafic rocks indicate that the peridotite ridge is sustained mainly by active tectonic uplift. The unparallel relation between the transform fault and the relative plate motion generates near north-south compression and the consequent tectonic uplift. In this sense, the peridotite massif is a pressure ridge due to the strike-slip displacement of the Saint Paul Transform Fault.

Evaluation of Southern Quebec asbestos residues for CO2 sequestration by mineral carbonation

Energy Technology Data Exchange (ETDEWEB)

Beaudoin, G.; Hebert, R.; Constantin, M. [Laval Univ., Quebec City, PQ (Canada); Bonin, G. [LAB Chrysotile Inc., Black Lake, PQ (Canada); Dipple, G. [British Columbia Univ., Vancouver, BC (Canada)

2003-08-01

One alternative to help reduce carbon dioxide (CO{sub 2}) levels in the atmosphere is to sequester CO{sub 2} by mineral carbonation using ultramafic rock-hosted magnesian silicates (serpentine, olivine, talc). The carbonation process produces magnesite, which is a geologically stable and an environmentally safe magnesium carbonate. Three CO{sub 2} sinks exist in southern Quebec use such silicates. They are: (1) asbestos mill residues, (2) associated mine waste, and (3) ultramafic bedrock. Extraction of asbestos in the region has been accomplished from serpentinized harzburgite located in the Thetford Mines and Asbestos ophiolitic massifs and also from the highly sheared Pennington Sheet. The physical and chemical properties of magnesium silicate deposits greatly determine their carbonation potential. A wide range of properties was observed in samples obtained from almost all asbestos mill residues and waste. The reaction which takes place depends on the mineral content. The kinetics of the reactions are influenced by humidity and grain size.

Evaluation of southern Quebec asbestos residues for CO{sub 2} sequestration by mineral carbonation : preliminary result

Energy Technology Data Exchange (ETDEWEB)

Huot, F. [Geo-conseils, Cap-Rouge, PQ (Canada); Beaudoin, G.; Hebert, R.; Constantin, M. [Laval Univ., Dept. of Geology and Geological Engineering, Quebec City, PQ (Canada); Bonin, G. [LAB Chrysotile Inc., Black Lake, PQ (Canada); Dipple, G.M. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Earth and Ocean Sciences

2003-07-01

Carbon dioxide (CO{sub 2}) sequestration is one approach that can help reduce CO{sub 2} levels in the atmosphere. This paper discusses CO{sub 2} sequestration by mineral carbonation using ultramafic rock-hosted magnesian silicates (serpentine, olivine, talc). The carbonation process produces magnesite, which is a geologically stable and an environmentally safe magnesium carbonate. There are 3 potential CO{sub 2} sinks in southern Quebec that use such silicates. They are: (1) asbestos mill residues, (2) associated mine waste, and (3) ultramafic bedrock. Asbestos is extracted from serpentinized harzburgite located in the Thetford Mines and Asbestos ophiolitic massifs and also from the highly sheared Pennington Sheet. The physical and chemical properties of magnesium silicate deposits greatly determine their carbonation potential. A wide range of properties was observed in samples obtained from almost all asbestos mill residues and waste. The reaction which takes place depends on the mineral content. The kinetics of the reactions are influenced by humidity and grain size.

Adapting to climate change: the self learning dike

NARCIS (Netherlands)

Hoekstra, Arjen Ysbert; de Kok, Jean-Luc; Augustijn, Dionysius C.M.; van Os, A.G.

2007-01-01

A problem with the current probabilistic flood prevention strategy in the Netherlands is that it builds on knowledge about the probability distributions for extreme discharges, which are subject to considerable uncertainties due to limited peak discharge records and climate change. It is inherent to

Application of the Diminishing Returns Concept in the Hydroecologic Restoration of Riverscapes

International Nuclear Information System (INIS)

Diefenderfer, Heida L.; Johnson, Gary E.; Skalski, John R.; Breithaupt, Stephen A.; Coleman, Andre M.

2012-01-01

Principles for optimizing the number and placement of ecological restoration actions on rivers and coasts would be useful in project engineering design and program planning. This study demonstrated that the yield of inundated floodplain habitat area from dike breaching conforms to a diminishing returns model. The aggregate effects of establishing hydrologic connections between a tidally influenced main stem river and the floodplain were experimentally examined using a hydrodynamic model. Restoration clusters of size 1, 4, 8, and more, replicated and randomized within the landscape, yielded average wetted floodplain area conforming with an exponential rise to maximum curve2(0.99)r=. Analysis of the average incremental change in floodplain inundation produced per breach showed that opening 25 % of the channels crossing the dike provided the maximum return on investment as measured by wetted area. Midstream breaches yielded 60 % and upstream breaches 2 % of the wetted area produced by downstream breaches. Dike-breach restoration programs therefore can be optimized by strategic determination of the spatial configuration and number of demolitions, though biological factors such as the accessibility of floodplain habitat and total length of channels connected also need to be considered. These findings have implications for cost-benefit analyses in restoration program planning.

Pesticides in soil and sediment of a dyke-protected area of the Red River Delta, Vietnam

Science.gov (United States)

Braun, Gianna; Bläsing, Melanie; Kruse, Jens; Amelung, Wulf; Renaud, Fabrice; Sebesvari, Zita

2017-04-01

Coastal regions are densely populated but at the same time represent important agricultural areas for food production of the growing world population. To sustain high agricultural yields, in monocultures such as permanent rice systems, pesticides are used in high quantity and frequency. While earlier studies monitored the fate of pesticides in paddy rice systems, the overall fate of these compounds is altered nowadays due to the construction of dykes, which are needed in many delta regions to protect them from high tides, storm surges and salt water intrusion such as in the Red River Delta. The dyke system regulates the discharge and water exchange inside the diked area including irrigation channels for the paddy rice production. Local authorities observed increasing pollution towards the sea (highest pollution close to the dykes) and hypothesized that the dyke system would prevent water exchange and thus lead to an accumulation of pollutants within the diked area. Hence, the purpose of this study was to investigate the effect of dykes on pesticide pollution patterns in coastal delta regions of the Red River Delta. The study was conducted in the district Giao Thuy of the Red River Delta, Vietnam. This area is surrounded by a sea and river dyke; both have several inlet and outlet gates to control the water level in the irrigation channels. We determined the pesticide pollution pattern in a diked agricultural area, as well as along salinity gradients in and outside the diked areas. Samples were taken from rice fields and sediments from irrigation channels inside the diked area as well from saline aquaculture fields located outside the dyke. Pesticide analysis was conducted by accelerated solvent extraction (ASE), followed up by the clean-up process described by Laabs et al. (2007) and analyses using gas chromatography coupled with a mass selective detector (MSD). Preliminary results suggest that out of the 26 analysed compounds chlorpyrifos, propiconazole and

Journal of Earth System Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Earth System Science; Volume 115; Issue 1. Mesoproterozoic diamondiferous ultramafic pipes at Majhgawan and Hinota, Panna area, central India: Key to the nature of sub-continental lithospheric mantle beneath the Vindhyan basin. N V Chalapathi Rao. Volume 115 Issue 1 February 2006 pp ...

An appraisal of an iterative construction of the endmembers controlling the composition of deep-sea manganese nodules from the Central Indian Ocean Basin.

Digital Repository Service at National Institute of Oceanography (India)

Renner, R.M.; Nath, B.N.; Glasby, G.P.

. The elements loaded on each were: (1) Mn, Zn, Ni, Cu, Mn-rich, (2) Fe, Ti, P, Co, Fe-rich, (3) Si, Al, Na, K, clay minerals, (3) Mg, ultramafic material, possibly including Mn, Cr, V, Ca, Na. These latter elements were also detected by their log-ratio variances...

Studium distribuce Pt-kovů v ultrabazických horninách svitavské tíhové a magnetické anomálie

Czech Academy of Sciences Publication Activity Database

Pašava, J.; Vymazalová, A.; Knésl, I.; Ackerman, Lukáš

2007-01-01

Roč. 2006, - (2007), s. 130-132 ISSN 0514-8057 R&D Projects: GA AV ČR KJB300130612 Institutional research plan: CEZ:AV0Z30130516 Keywords : PGE * ultramafic rocks * Svitavy Subject RIV: DB - Geology ; Mineralogy http://www.geology.cz/zpravy/obsah/2006/2006-str.130-132.pdf

Source and fractionation controls on subduction-related plutons and dike swarms in southern Patagonia (Torres del Paine area) and the low Nb/Ta of upper crustal igneous rocks

Science.gov (United States)

Müntener, Othmar; Ewing, Tanya; Baumgartner, Lukas P.; Manzini, Mélina; Roux, Thibaud; Pellaud, Pierre; Allemann, Luc

2018-05-01

The subduction system in southern Patagonia provides direct evidence for the variability of the position of an active continental arc with respect to the subducting plate through time, but the consequences on the arc magmatic record are less well studied. Here we present a geochemical and geochronological study on small plutons and dykes from the upper crust of the southern Patagonian Andes at 51°S, which formed as a result of the subduction of the Nazca and Antarctic plates beneath the South American continent. In situ U-Pb geochronology on zircons and bulk rock geochemical data of plutonic and dyke rocks are used to constrain the magmatic evolution of the retro-arc over the last 30 Ma. We demonstrate that these combined U-Pb and geochemical data for magmatic rocks track the temporal and spatial migration of the active arc, and associated retro-arc magmatism. Our dataset indicates that the rear-arc area is characterized by small volumes of alkaline basaltic magmas at 29-30 Ma that are characterized by low La/Nb and Th/Nb ratios with negligible arc signatures. Subsequent progressive eastward migration of the active arc culminated with the emplacement of calc-alkaline plutons and dikes 17-16 Ma with elevated La/Nb and Th/Nb ratios and typical subduction signatures constraining the easternmost position of the southern Patagonian batholith at that time. Geochemical data on the post-16 Ma igneous rocks including the Torres del Paine laccolith indicate an evolution to transitional K-rich calc-alkaline magmatism at 12.5 ± 0.2 Ma. We show that trace element ratios such as Nb/Ta and Dy/Yb systematically decrease with increasing SiO2, for both the 17-16 Ma calc-alkaline and the 12-13 Ma K-rich transitional magmatism. In contrast, Th/Nb and La/Nb monitor the changes in the source composition of these magmas. We suggest that the transition from the common calc-alkaline to K-rich transitional magmatism involves a change in the source component, while the trace element ratios

Compositional Variation of Chrome Spinels in the Ore-bearing Zones of the Kraka Ophiolite and the Chromitite Origin

Directory of Open Access Journals (Sweden)

D. E. Saveliev

2017-07-01

Full Text Available The article considers a chemical variation of accessory and ore-forming chrome spinels from the Kraka ultramafic massif at the different scales, from the deposit to the thin section. A correlation analysis of compositional and structural features of ultramafic rocks and ores was performed. The ultramafic rocks and chromitites in the studied massif show the distinct deformation structures and tectonite olivine fabric. A typical chemical gap (i.e. Cr#=Cr/(Cr+Al was observed between peridotite, on the one hand, and dunite and chromitite, on the other hand, on the scale of deposits and ore-bearing zones. The location and size of this gap depend on the type of deposit. The gap becomes wider from the disseminated tabular bodies to the typical podiform ones. It has been found that in the thin initial dunite veinlets in peridotite the chrome spinels chemistry changes gradually and there is no Cr# gap between peridotite and dunite. The dunite venlets show a strong olivine fabric, which is an evidence of their high-temperature plastic flow origin. It has been revealed that new chrome spinel grains previously formed as rods or needles and then coarsened. We explained this observation as the result of impurity segregation, coalescence and spheroidization induced by the plastic deformation of olivine. It is inferred that a solid crystal flow is the main requirement for the dunite and chromitite body formation in the Kraka ophiolite massif. In the solid stream, the mineral phase separation takes place. For example, olivine and orthopyroxene grains of parental peridotite separate from one another, and weaker (more mobile olivine grains form dunite bodies in which chromitite appears as a result of impurity segregation.

The Sidi Mohamed peridotites (Edough Massif, NE Algeria ...

Indian Academy of Sciences (India)

We suggest that the Sidi Mohamed ultramafic body was derived directly from the upper mantle and tectonically ... The aim of this paper is to determine the nature of the peridotite .... REE were enriched using the method described by. Zuleger .... Table 1. Chemical composition of the peridotites from Sidi Mohamed outcrop.