WorldWideScience

Sample records for ubc lead focus

  1. Disruption of polyubiquitin gene Ubc leads to defective proliferation of hepatocytes and bipotent fetal liver epithelial progenitor cells

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyejin; Yoon, Min-Sik; Ryu, Kwon-Yul, E-mail: kyryu@uos.ac.kr

    2013-06-07

    Highlights: •Proliferation capacity of Ubc{sup −/−} FLCs was reduced during culture in vitro. •Ubc is required for proliferation of both hepatocytes and bipotent FLEPCs. •Bipotent FLEPCs exhibit highest Ubc transcription and proliferation capacity. •Cell types responsible for Ubc{sup −/−} fetal liver developmental defect were identified. -- Abstract: We have previously demonstrated that disruption of polyubiquitin gene Ubc leads to mid-gestation embryonic lethality most likely due to a defect in fetal liver development, which can be partially rescued by ectopic expression of Ub. In a previous study, we assessed the cause of embryonic lethality with respect to the fetal liver hematopoietic system. We confirmed that Ubc{sup −/−} embryonic lethality could not be attributed to impaired function of hematopoietic stem cells, which raises the question of whether or not FLECs such as hepatocytes and bile duct cells, the most abundant cell types in the liver, are affected by disruption of Ubc and contribute to embryonic lethality. To answer this, we isolated FLCs from E13.5 embryos and cultured them in vitro. We found that proliferation capacity of Ubc{sup −/−} cells was significantly reduced compared to that of control cells, especially during the early culture period, however we did not observe the increased number of apoptotic cells. Furthermore, levels of Ub conjugate, but not free Ub, decreased upon disruption of Ubc expression in FLCs, and this could not be compensated for by upregulation of other poly- or mono-ubiquitin genes. Intriguingly, the highest Ubc expression levels throughout the entire culture period were observed in bipotent FLEPCs. Hepatocytes and bipotent FLEPCs were most affected by disruption of Ubc, resulting in defective proliferation as well as reduced cell numbers in vitro. These results suggest that defective proliferation of these cell types may contribute to severe reduction of fetal liver size and potentially mid

  2. NRC/UBC Node

    Energy Technology Data Exchange (ETDEWEB)

    Ellis-Perry, B. [Univ. of British Columbia, Vancouver, British Columbia (Canada); Yogendran, Y. [NRC Inst. for Fuel Cell Innovation, Vancouver, British Columbia (Canada)

    2004-07-01

    'Full text:' In the search for cleaner, more sustainable energy sources, many of the most promising breakthroughs have been in hydrogen technology. However, this promise will remain unfulfilled without public interest and enthusiasm, and without the infrastructure to support the technology. In order to get there, we have to test, perfect, and demonstrate technology that is safe and affordable, and we must do so in practical, familiar settings. Ideally, such settings should be easily accessible to the engineers, planners, and architects of tomorrow while providing a showcase for hydrogen technology that will attract the general public. This place is the NRC/UBC Hydrogen Node. The UBC campus in Point Grey is home to leading edge, internationally recognized researchers in a range of disciplines, both within the University and at the NRC Institute for Fuel Cell Innovation. On average, 40,000 students, faculty, and staff use the campus every day; UBC graduates go on to leadership positions in communities around the globe. Its spectacular setting makes UBC a popular destination for thousands of visitors from around the world. In 2006 UBC will host the World Urban Forum, and in 2010 it will be one of the sites for the Vancouver-Whistler Olympic Games. UBC and its South Campus neighbourhoods are developing as a model sustainable community, offering an excellent opportunity to develop and showcase hydrogen infrastructure and technology in a real-life, attractive setting that will be seen by thousands of people around the world. UBC's facilities, location, and Trek 2010 commitment to excellence in learning, research, and sustainability make it an ideal location for such a project. The H2 Village at UBC will be an integrated hydrogen demonstration project, linked to the hydrogen highway. This project is bringing together leading companies, researchers, and government agencies committed to making the refinement and early adoption of safe hydrogen technology a

  3. NRC/UBC Node

    International Nuclear Information System (INIS)

    Ellis-Perry, B.; Yogendran, Y.

    2004-01-01

    'Full text:' In the search for cleaner, more sustainable energy sources, many of the most promising breakthroughs have been in hydrogen technology. However, this promise will remain unfulfilled without public interest and enthusiasm, and without the infrastructure to support the technology. In order to get there, we have to test, perfect, and demonstrate technology that is safe and affordable, and we must do so in practical, familiar settings. Ideally, such settings should be easily accessible to the engineers, planners, and architects of tomorrow while providing a showcase for hydrogen technology that will attract the general public. This place is the NRC/UBC Hydrogen Node. The UBC campus in Point Grey is home to leading edge, internationally recognized researchers in a range of disciplines, both within the University and at the NRC Institute for Fuel Cell Innovation. On average, 40,000 students, faculty, and staff use the campus every day; UBC graduates go on to leadership positions in communities around the globe. Its spectacular setting makes UBC a popular destination for thousands of visitors from around the world. In 2006 UBC will host the World Urban Forum, and in 2010 it will be one of the sites for the Vancouver-Whistler Olympic Games. UBC and its South Campus neighbourhoods are developing as a model sustainable community, offering an excellent opportunity to develop and showcase hydrogen infrastructure and technology in a real-life, attractive setting that will be seen by thousands of people around the world. UBC's facilities, location, and Trek 2010 commitment to excellence in learning, research, and sustainability make it an ideal location for such a project. The H2 Village at UBC will be an integrated hydrogen demonstration project, linked to the hydrogen highway. This project is bringing together leading companies, researchers, and government agencies committed to making the refinement and early adoption of safe hydrogen technology a reality

  4. Space Focus Lead Report

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, Geoffrey D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-10

    The Space Focus team is tasked with the definition of the Space Focused Science Topics, and with the review and ranking of the CSES proposals received in all the program areas. This is achieved by dedicated meetings or a series of informal discussions and/or e-mail reviews.

  5. Observation of an E2 (Ubc9-homodimer by crystallography

    Directory of Open Access Journals (Sweden)

    Aileen Y. Alontaga

    2016-06-01

    Full Text Available Post-translational modifications by the small ubiquitin-like modifiers (SUMO, in particular the formation of poly-SUMO-2 and -3 chains, regulates essential cellular functions and its aberration leads to life-threatening diseases (Geoffroy and Hay, 2009 [1]. It was shown previously that the non-covalent interaction between SUMO and the conjugating enzyme (E2 for SUMO, known as Ubc9, is required for poly-SUMO-2/3 chain formation (Knipscheer et al., 2007 [2]. However, the structure of SUMO-Ubc9 non-covalent complex, by itself, could not explain how the poly-SUMO-2/3 chain forms and consequently a Ubc9 homodimer, although never been observed, was proposed for poly-SUMO-2/3 chain formation (Knipscheer et al., 2007 [2]. Here, we solved the crystal structure of a heterotrimer containing a homodimer of Ubc9 and the RWD domain from RWDD3. The asymmetric Ubc9 homodimer is mediated by the N-terminal region of one Ubc9 molecule and a surface near the catalytic Cys of the second Ubc9 molecule (Fig. 1A. This N-terminal surface of Ubc9 that is involved in the homodimer formation also interacts with the RWD domain, the ubiquitin-fold domain of the SUMO activating enzyme (E1, SUMO, and the E3 ligase, RanBP2 (Knipscheer et al., 2007; Tong et al.. 1997; Tatham et al., 2005; Reverter and Lima, 2005; Capili and Lima, 2007; Wang et al., 2009, 2010; Wang and Chen, 2010; Alontaga et al., 2015 [2–10]. The existence of the Ubc9 homodimer in solution is supported by previously published solution NMR studies of rotational correlation time and chemical shift perturbation (Alontaga et al., 2015; Yuan et al., 1999 [10,11]. Site-directed mutagenesis and biochemical analysis suggests that this dimeric arrangement of Ubc9 is likely important for poly-SUMO chain formation (Fig. 1B and C. The asymmetric Ubc9 homodimer described for the first time in this work could provide the critical missing link in the poly-SUMO chain formation mechanism. The data presented here are related

  6. Physical and functional interactions between ZIP kinase and UbcH5

    International Nuclear Information System (INIS)

    Ohbayashi, Norihiko; Okada, Katsuya; Kawakami, Shiho; Togi, Sumihito; Sato, Noriko; Ikeda, Osamu; Kamitani, Shinya; Muromoto, Ryuta; Sekine, Yuichi; Kawai, Taro; Akira, Shizuo; Matsuda, Tadashi

    2008-01-01

    Zipper-interacting protein kinase (ZIPK) is a widely expressed serine/threonine kinase that has been implicated in cell death and transcriptional regulation, but its mechanism of regulation remains unknown. In our previous study, we showed that leukemia inhibitory factor stimulated threonine-265 phosphorylation of ZIPK, thereby leading to phosphorylation and activation of signal transducer and activator of transcription 3. Here, we identified UbcH5c as a novel ZIPK-binding partner by yeast two-hybrid screening. Importantly, we found that UbcH5c induced ubiquitination of ZIPK. Small-interfering RNA-mediated reduction of endogenous UbcH5 expression decreased ZIPK ubiquitination. Furthermore, coexpression of UbcH5c with ZIPK influenced promyelocytic leukemia protein nuclear body (PML-NB) formation. These results suggest that UbcH5 regulates ZIPK accumulation in PML-NBs by interacting with ZIPK and stimulating its ubiquitination

  7. The plasma focus - numerical experiments leading technology

    International Nuclear Information System (INIS)

    Saw, S.H.; Lee, S.

    2013-01-01

    Numerical experiments on the plasma focus are now used routinely to assist design and provide reference points for diagnostics. More importantly guidance has been given regarding the implementation of technology for new generations of plasma focus devices. For example intensive series of experiments have shown that it is of no use to reduce static bank inductance L0 below certain values because of the consistent loading effects of the plasma focus dynamics on the capacitor bank. Thus whilst it was thought that the PF1000 could receive major benefits by reducing its bank inductance L 0 , numerical experiments have shown to the contrary that its present L 0 of 30 nH is already optimum and that reducing L 0 would be a very expensive fruitless exercise. This knowledge gained from numerical experiments now acts as a general valuable guideline to all high performance (ie low inductance) plasma focus devices not to unnecessarily attempt to further lower the static inductance L 0 . The numerical experiments also show that the deterioration of the yield scaling law (e.g. the fusion neutron yield scaling with storage energy) is inevitable again due to the consistent loading effect of the plasma focus, which becomes more and more dominant as capacitor bank impedance reduces with increasing capacitance C 0 as storage energy is increased. This line of thinking has led to the suggestion of using higher voltages (as an alternative to increasing C 0 ) and to seeding of Deuterium with noble gases in order to enhance compression through thermodynamic mechanisms and through radiation cooling effects of strong line radiation. Circuit manipulation e.g. to enhance focus pinch compression by current-stepping is also being numerically experimented upon. Ultimately however systems have to be built, guided by numerical experiments, so that the predicted technology may be proven and realized. (author)

  8. Leading Online: An Autoethnography Focused on Leading an Instructional Focus on Student Learning in an Online School

    Science.gov (United States)

    Lancaster, Sally Ann

    2012-01-01

    The purpose in writing this autoethnography was to describe, analyze and interpret one leader's experience in leading a group of online teachers. I specifically wanted to identify the characteristics of an online learning environment that triggered teachers to focus on management issues rather than instructional learning issues; that is what…

  9. Degradation Signals Recognized by the Ubc6p-Ubc7p Ubiquitin-Conjugating Enzyme Pair

    Science.gov (United States)

    Gilon, Tamar; Chomsky, Orna; Kulka, Richard G.

    2000-01-01

    Proteolysis by the ubiquitin-proteasome system is highly selective. Specificity is achieved by the cooperation of diverse ubiquitin-conjugating enzymes (Ubcs or E2s) with a variety of ubiquitin ligases (E3s) and other ancillary factors. These recognize degradation signals characteristic of their target proteins. In a previous investigation, we identified signals directing the degradation of β-galactosidase and Ura3p fusion proteins via a subsidiary pathway of the ubiquitin-proteasome system involving Ubc6p and Ubc7p. This pathway has recently been shown to be essential for the degradation of misfolded and regulated proteins in the endoplasmic reticulum (ER) lumen and membrane, which are transported to the cytoplasm via the Sec61p translocon. Mutant backgrounds which prevent retrograde transport of ER proteins (hrd1/der3Δ and sec61-2) did not inhibit the degradation of the β-galactosidase and Ura3p fusions carrying Ubc6p/Ubc7p pathway signals. We therefore conclude that the ubiquitination of these fusion proteins takes place on the cytosolic face of the ER without prior transfer to the ER lumen. The contributions of different sequence elements to a 16-amino-acid-residue Ubc6p-Ubc7p-specific signal were analyzed by mutation. A patch of bulky hydrophobic residues was an essential element. In addition, positively charged residues were found to be essential. Unexpectedly, certain substitutions of bulky hydrophobic or positively charged residues with alanine created novel degradation signals, channeling the degradation of fusion proteins to an unidentified proteasomal pathway not involving Ubc6p and Ubc7p. PMID:10982838

  10. Kinetics of cesium lead halide perovskite nanoparticle growth; focusing and de-focusing of size distribution

    Science.gov (United States)

    Koolyk, Miriam; Amgar, Daniel; Aharon, Sigalit; Etgar, Lioz

    2016-03-01

    In this work we study the kinetics of cesium lead halide perovskite nanoparticle (NP) growth; the focusing and de-focusing of the NP size distribution. Cesium lead halide perovskite NPs are considered to be attractive materials for optoelectronic applications. Understanding the kinetics of the formation of these all-inorganic perovskite NPs is critical for reproducibly and reliably generating large amounts of uniformly sized NPs. Here we investigate different growth durations for CsPbI3 and CsPbBr3 NPs, tracking their growth by high-resolution transmission electron microscopy and size distribution analysis. As a result, we are able to provide a detailed model for the kinetics of their growth. It was observed that the CsPbI3 NPs exhibit focusing of the size distribution in the first 20 seconds of growth, followed by de-focusing over longer growth durations, while the CsPbBr3 NPs show de-focusing of the size distribution starting from the beginning of the growth. The monomer concentration is depleted faster in the case of CsPbBr3 than in the case of CsPbI3, due to faster diffusion of the monomers, which increases the critical radius and results in de-focusing of the population. Accordingly, focusing is not observed within 40 seconds of growth in the case of CsPbBr3. This study provides important knowledge on how to achieve a narrow size distribution of cesium lead halide perovskite NPs when generating large amounts of these promising, highly luminescent NPs.In this work we study the kinetics of cesium lead halide perovskite nanoparticle (NP) growth; the focusing and de-focusing of the NP size distribution. Cesium lead halide perovskite NPs are considered to be attractive materials for optoelectronic applications. Understanding the kinetics of the formation of these all-inorganic perovskite NPs is critical for reproducibly and reliably generating large amounts of uniformly sized NPs. Here we investigate different growth durations for CsPbI3 and CsPbBr3 NPs, tracking

  11. U.B.C.: Past, present and future

    International Nuclear Information System (INIS)

    Wall, W.D.

    1993-01-01

    This report documents the involvement of the International Conference of Building Officials (ICBO) in hazard mitigation, particularly in relation to earthquakes. It encompasses the history of the Uniform Building Code TM (U.B.C) provisions as they apply to earthquake hazard mitigation. Also discussed is Executive Order 12699. Conference membership services and benefits are reviewed and the future of ICBO, building codes and hazard mitigation are examined. The U.B.C. seismic provisions make a vast contribution to the design of buildings for seismic safety

  12. Focusing on Student Performance Through Accountability. Challenge to Lead Series

    Science.gov (United States)

    Diaz, Alicia; Lord, Joan

    2005-01-01

    This report, Focusing on Student Performance Through Accountability, shows that more students, in all groups, are meeting state standards. And parents, communities and education leaders are better informed about student performance than ever before. It shows that large gaps remain in every state. If the state is to reach the No Child Left Behind…

  13. Human Ubc9 is involved in intracellular HIV-1 Env stability after trafficking out of the trans-Golgi network in a Gag dependent manner.

    Directory of Open Access Journals (Sweden)

    Christopher R Bohl

    Full Text Available The cellular E2 Sumo conjugase, Ubc9 interacts with HIV-1 Gag, and is important for the assembly of infectious HIV-1 virions. In the previous study we demonstrated that in the absence of Ubc9, a defect in virion assembly was associated with decreased levels of mature intracellular Envelope (Env that affected Env incorporation into virions and virion infectivity. We have further characterized the effect of Ubc9 knockdown on HIV Env processing and assembly. We found that gp160 stability in the endoplasmic reticulum (ER and its trafficking to the trans-Golgi network (TGN were unaffected, indicating that the decreased intracellular mature Env levels in Ubc9-depleted cells were due to a selective degradation of mature Env gp120 after cleavage from gp160 and trafficked out of the TGN. Decreased levels of Gag and mature Env were found to be associated with the plasma membrane and lipid rafts, which suggest that these viral proteins were not trafficked correctly to the assembly site. Intracellular gp120 were partially rescued when treated with a combination of lysosome inhibitors. Taken together our results suggest that in the absence of Ubc9, gp120 is preferentially degraded in the lysosomes likely before trafficking to assembly sites leading to the production of defective virions. This study provides further insight in the processing and packaging of the HIV-1 gp120 into mature HIV-1 virions.

  14. Zoledronate induces apoptosis in cells from fibro-cellular membrane of unicameral bone cyst (UBC).

    Science.gov (United States)

    Yu, John; Chang, Seong-Sil; Suratwala, Sanjeev; Chung, Woo-Sik; Abdelmessieh, Peter; Lee, Hahn-Jun; Yang, Jay; Lee, Francis Young-In

    2005-09-01

    Unicameral bone cyst (UBC) is a benign cystic lesion in children which is prone to fracture. Various treatments are available, but recurrence after different types of percutaneous injection therapy can cause bone destruction and pathologic fracture. The potential therapeutic effects of anti-resorptive agents, such as bisphosphonates, have not been investigated for UBC. The objective of this study was to characterize the cells from the fibro-cellular membrane of unicameral bone cyst (UBC cells) and to determine whether zoledronate, a nitrogen-containing bisphosphonate, could induce apoptosis in UBC cells. Flow cytometry and immunoblotting were performed in order to determine whether zoledronate induced apoptosis. Cells derived from normal human trabecular bones were used as controls against UBC cells to compare the effect of zoledronate in inducing apoptosis. Immunohisto/cytochemistry (IHC/ICC) and mini-array analyses were performed on tissues and cultured cells. Isolated peripheral blood mononuclear cells were incubated with conditioned media from the UBC cells to determine whether they are capable of inducing osteoclastogenesis. UBC membrane is composed of cells staining positively with CD68, SDF-1, STRO-1 and RANKL, but in vitro cells showed no staining with antibodies to CD68 and STRO-1, suggesting that there was a clonal selection of stromal cells during cell culture. UBC cells also express RUNX2 (runt-related transcription factor-2, core binding factor-1), a key transcription factor for osteoblastic differentiation. In addition, media collected from UBC cells induced a generation of multi-nucleated osteoclast-like cells of peripheral blood mononuclear cells. Zoledronate induced apoptosis of UBC cells in a dose-dependent manner. Apoptosis was evidenced by induction of the active cleaved form of caspase-3. The baseline apoptotic fractions were similar in UBC cells and trabecular bone cells. However, in the overall apoptotic fractions in this study, trabecular

  15. Engaging Focus Group Methodology: The 4-H Middle School-Aged Youth Learning and Leading Study

    Science.gov (United States)

    Scott, Siri; Grant, Samantha; Nippolt, Pamela Larson

    2015-01-01

    With young people, discussing complex issues such as learning and leading in a focus group can be a challenge. To help prime youth for the discussion, we created a focus group approach that featured a fun, interactive activity. This article includes a description of the focus group activity, lessons learned, and suggestions for additional…

  16. Enhanced SUMOylation of proteins containing a SUMO-interacting motif by SUMO-Ubc9 fusion

    International Nuclear Information System (INIS)

    Kim, Eui Tae; Kim, Kyeong Kyu; Matunis, Mike J.; Ahn, Jin-Hyun

    2009-01-01

    Identifying new targets for SUMO and understanding the function of protein SUMOylation are largely limited by low level of SUMOylation. It was found recently that Ubc9, the SUMO E2 conjugating enzyme, is covalently modified by SUMO at a lysine 14 in the N-terminal alpha helix, and that SUMO-modified Ubc9 has enhanced conjugation activity for certain target proteins containing a SUMO-interacting motif (SIM). Here, we show that, compared to intact Ubc9, the SUMO-Ubc9 fusion protein has higher conjugating activity for SIM-containing targets such as Sp100 and human cytomegalovirus IE2. Assays using an IE2 SIM mutant revealed the requirement of SIM for the enhanced IE2 SUMOylation by SUMO-Ubc9. In pull-down assays with cell extracts, the SUMO-Ubc9 fusion protein bound to more diverse cellular proteins and interacted with some SIM-containing proteins with higher affinities than Ubc9. Therefore, the devised SUMO-Ubc9 fusion will be useful for identifying SIM-containing SUMO targets and producing SUMO-modified proteins.

  17. Structural model of the hUbA1-UbcH10 quaternary complex: in silico and experimental analysis of the protein-protein interactions between E1, E2 and ubiquitin.

    Directory of Open Access Journals (Sweden)

    Stefania Correale

    Full Text Available UbcH10 is a component of the Ubiquitin Conjugation Enzymes (Ubc; E2 involved in the ubiquitination cascade controlling the cell cycle progression, whereby ubiquitin, activated by E1, is transferred through E2 to the target protein with the involvement of E3 enzymes. In this work we propose the first three dimensional model of the tetrameric complex formed by the human UbA1 (E1, two ubiquitin molecules and UbcH10 (E2, leading to the transthiolation reaction. The 3D model was built up by using an experimentally guided incremental docking strategy that combined homology modeling, protein-protein docking and refinement by means of molecular dynamics simulations. The structural features of the in silico model allowed us to identify the regions that mediate the recognition between the interacting proteins, revealing the active role of the ubiquitin crosslinked to E1 in the complex formation. Finally, the role of these regions involved in the E1-E2 binding was validated by designing short peptides that specifically interfere with the binding of UbcH10, thus supporting the reliability of the proposed model and representing valuable scaffolds for the design of peptidomimetic compounds that can bind selectively to Ubcs and inhibit the ubiquitylation process in pathological disorders.

  18. Overexpression of UbcH10 alternates the cell cycle profile and accelerate the tumor proliferation in colon cancer

    Directory of Open Access Journals (Sweden)

    Hatoh Shinji

    2009-03-01

    Full Text Available Abstract Background UbcH10 participates in proper metaphase to anaphase transition, and abrogation of UbcH10 results in the premature separation of sister chromatids. To assess the potential role of UbcH10 in colon cancer progression, we analyzed the clinicopathological relevance of UbcH10 in colon cancer. Methods We firstly screened the expression profile of UbcH10 in various types of cancer tissues as well as cell lines. Thereafter, using the colon cancer cells line, we manipulated the expression of UbcH10 and evaluated the cell cycle profile and cellular proliferations. Furthermore, the clinicopathological significance of UbcH10 was immunohistologically evaluated in patients with colon cancer. Statistical analysis was performed using the student's t-test and Chi-square test. Results Using the colon cancer cells, depletion of UbcH10 resulted in suppression of cellular growth whereas overexpression of UbcH10 promoted the cellular growth and oncogenic cellular growth. Mitotic population was markedly alternated by the manipulation of UbcH10 expression. Immunohistochemical analysis indicated that UbcH10 was significantly higher in colon cancer tissue compared with normal colon epithelia. Furthermore, the clinicopathological evaluation revealed that UbcH10 was associated with high-grade histological tumors. Conclusion The results show the clinicopathological significance of UbcH10 in the progression of colon cancer. Thus UbcH10 may act as a novel biomarker in patients with colon cancer.

  19. Distinct Functional Domains of Ubc9 Dictate Cell Survival and Resistance to Genotoxic Stress

    Science.gov (United States)

    van Waardenburg, Robert C. A. M.; Duda, David M.; Lancaster, Cynthia S.; Schulman, Brenda A.; Bjornsti, Mary-Ann

    2006-01-01

    Covalent modification with SUMO alters protein function, intracellular localization, or protein-protein interactions. Target recognition is determined, in part, by the SUMO E2 enzyme, Ubc9, while Siz/Pias E3 ligases may facilitate select interactions by acting as substrate adaptors. A yeast conditional Ubc9P123L mutant was viable at 36°C yet exhibited enhanced sensitivity to DNA damage. To define functional domains in Ubc9 that dictate cellular responses to genotoxic stress versus those necessary for cell viability, a 1.75-Å structure of yeast Ubc9 that demonstrated considerable conservation of backbone architecture with human Ubc9 was solved. Nevertheless, differences in side chain geometry/charge guided the design of human/yeast chimeras, where swapping domains implicated in (i) binding residues within substrates that flank canonical SUMOylation sites, (ii) interactions with the RanBP2 E3 ligase, and (iii) binding of the heterodimeric E1 and SUMO had distinct effects on cell growth and resistance to DNA-damaging agents. Our findings establish a functional interaction between N-terminal and substrate-binding domains of Ubc9 and distinguish the activities of E3 ligases Siz1 and Siz2 in regulating cellular responses to genotoxic stress. PMID:16782883

  20. Overexpression of the E2 ubiquitin-conjugating enzyme UbcH10 causes chromosome missegregation and tumor formation.

    NARCIS (Netherlands)

    Ree, J.H.; Jeganathan, K.B.; Malureanu, L.; Deursen, J.M.A. van

    2010-01-01

    The anaphase-promoting complex/cyclosome (APC/C) E3 ubiquitin ligase functions with the E2 ubiquitin-conjugating enzyme UbcH10 in the orderly progression through mitosis by marking key mitotic regulators for destruction by the 26-S proteasome. UbcH10 is overexpressed in many human cancer types and

  1. 2013 Alan Blizzard Award Feature Article--Enriching Educational Experiences through UBC's First Year Seminar in Science (SCIE113)

    Science.gov (United States)

    Fox, Joanne; Birol, Gülnur; Han, Andrea; Cassidy, Alice; Nakonechny, Joanne; Berger, Jim; Peacock, Simon; Samuels, Lacey

    2014-01-01

    The First Year Seminar in Science (SCIE113) was developed during 2009/2010 academic year through an exemplary collaboration between faculty, administrators and educational support staff in the Faculty of Science at the University of British Columbia (UBC). SCIE113 reflects the vision and values of the Faculty of Science and UBC by offering an…

  2. Structure of human ubiquitin-conjugating enzyme E2 G2 (UBE2G2/UBC7)

    International Nuclear Information System (INIS)

    Arai, Ryoichi; Yoshikawa, Seiko; Murayama, Kazutaka; Imai, Yuzuru; Takahashi, Ryosuke; Shirouzu, Mikako; Yokoyama, Shigeyuki

    2006-01-01

    The crystal structure of human UBE2G2/UBC7 was solved at 2.56 Å resolution. The superimposition of UBE2G2 on UbcH7 in a c-Cbl–UbcH7–ZAP70 ternary complex suggested that the two loop regions of UBE2G2 interact with the RING domain in a similar way as UbcH7. The human ubiquitin-conjugating enzyme E2 G2 (UBE2G2/UBC7) is involved in protein degradation, including a process known as endoplasmic reticulum-associated degradation (ERAD). The crystal structure of human UBE2G2/UBC7 was solved at 2.56 Å resolution. The UBE2G2 structure comprises a single domain consisting of an antiparallel β-sheet with four strands, five α-helices and two 3 10 -helices. Structural comparison of human UBE2G2 with yeast Ubc7 indicated that the overall structures are similar except for the long loop region and the C-terminal helix. Superimposition of UBE2G2 on UbcH7 in a c-Cbl–UbcH7–ZAP70 ternary complex suggested that the two loop regions of UBE2G2 interact with the RING domain in a similar way to UbcH7. In addition, the extra loop region of UBE2G2 may interact with the RING domain or its neighbouring region and may be involved in the binding specificity and stability

  3. Knockdown of UbcH10 Enhances the Chemosensitivity of Dual Drug Resistant Breast Cancer Cells to Epirubicin and Docetaxel

    Directory of Open Access Journals (Sweden)

    Cheng Wang

    2015-03-01

    Full Text Available Breast cancer is one of the most common and lethal cancers in women. As a hub gene involved in a diversity of tumors, the ubiquitin-conjugating enzyme H10 (UbcH10, may also play some roles in the genesis and development of breast cancer. In the current study, we found that the expression of UbcH10 was up-regulated in some breast cancer tissues and five cell lines. We established a dual drug resistant cell line MCF-7/EPB (epirubicin/TXT (docetaxel and a lentiviral system expressing UbcH10 shRNA to investigate the effects of UbcH10 knockdown on the chemosensitivity of MCF-7/EPB/TXT cells to epirubicin and docetaxel. The knockdown of UbcH10 inhibited the proliferation of both MCF-7 and MCF-7/EPB/TXT cells, due to the G1 phase arrest in cell cycle. Furthermore, UbcH10 knockdown increased the sensitivity of MCF-7/EPB/TXT cells to epirubicin and docetaxel and promoted the apoptosis induced by these two drugs. Protein detection showed that, in addition to inhibiting the expression of Ki67 and cyclin D1, UbcH10 RNAi also impaired the increased BCL-2 and MDR-1 expression levels in MCF-7/EPB/TXT cells, which may contribute to abating the drug resistance in the breast cancer cells. Our research in the current study demonstrated that up-regulation of UbcH10 was involved in breast cancer and its knockdown can inhibit the growth of cancer cells and increase the chemosensitivity of the dual drug resistant breast cancer cells to epirubicin and docetaxel, suggesting that UbcH10 may be a promising target for the therapy of breast cancer.

  4. The fission yeast ubiquitin-conjugating enzymes UbcP3, Ubc15, and Rhp6 affect transcriptional silencing of the mating-type region

    DEFF Research Database (Denmark)

    Nielsen, Inga Sig; Nielsen, Olaf; Murray, Johanne M

    2002-01-01

    Genes transcribed by RNA polymerase II are silenced when introduced near the mat2 or mat3 mating-type loci of the fission yeast Schizosaccharomyces pombe. Silencing is mediated by a number of gene products and cis-acting elements. We report here the finding of novel trans-acting factors identified...... was not suppressed by a mutation in the 26S proteasome, suggesting that loss of silencing is not due to an increased degradation of silencing factors but rather to the posttranslational modification of proteins by ubiquitination. We discuss the implications of these results for the possible modes of action of UbcP3...

  5. Characterization of papillomavirus E1 helicase mutants defective for interaction with the SUMO-conjugating enzyme Ubc9

    International Nuclear Information System (INIS)

    Fradet-Turcotte, Amelie; Brault, Karine; Titolo, Steve; Howley, Peter M.; Archambault, Jacques

    2009-01-01

    The E1 helicase from BPV and HPV16 interacts with Ubc9 to facilitate viral genome replication. We report that HPV11 E1 also interacts with Ubc9 in vitro and in the yeast two-hybrid system. Residues in E1 involved in oligomerization (353-435) were sufficient for binding to Ubc9 in vitro, but the origin-binding and ATPase domains were additionally required in yeast. Nuclear accumulation of BPV E1 was shown previously to depend on its interaction with Ubc9 and sumoylation on lysine 514. In contrast, HPV11 and HPV16 E1 mutants defective for Ubc9 binding remained nuclear even when the SUMO pathway was inhibited. Furthermore, we found that K514 in BPV E1 and the analogous K559 in HPV11 E1 are not essential for nuclear accumulation of E1. These results suggest that the interaction of E1 with Ubc9 is not essential for its nuclear accumulation but, rather, depends on its oligomerization and binding to DNA and ATP.

  6. Preliminary Results of a Multicentre Study of the UBC Rapid Test for Detection of Urinary Bladder Cancer.

    Science.gov (United States)

    Ecke, Thorsten H; Arndt, Christian; Stephan, Carsten; Hallmann, Steffen; Lux, Oliver; Otto, Thomas; Ruttloff, Jürgen; Gerullis, Holger

    2015-05-01

    UBC Rapid is a test detecting fragments of cytokeratins 8 and 18 in urine. These are cytokeratins frequently overexpressed in tumor cells. We present the first results of a multi-centre study using UBC Rapid in patients with bladder cancer and healthy controls. Clinical urine samples from 92 patients with tumors of the urinary bladder (45 low-grade and 47 high-grade tumors) and from 33 healthy controls were used. Urine samples were analyzed by the UBC Rapid point-of-care (POC) system and evaluated both visually and quantitatively using a concile Omega 100 POC reader. For visual evaluation, different thresholds of band intensity for considering a test as positive were applied. Sensitivities and specificities were calculated by contingency analyses. We found that pathological concentrations by UBC Rapid are detectable in urine of patients with bladder cancer. The calculated diagnostic sensitivity of UBC Rapid in urine was 68.1% for high-grade, but only 46.2% for low-grade tumors. The specificity was 90.9%. The area under the curve (AUC) after receiver-operated curve (ROC) analysis was 0.733. Pathological levels of UBC Rapid in urine are higher in patients with bladder cancer in comparison to the control group (pbladder cancer and controls. Further studies with a greater number of patients will show how valuable these results are. Copyright© 2015 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  7. The dual effects of leading for safety: The mediating role of employee regulatory focus.

    Science.gov (United States)

    Kark, Ronit; Katz-Navon, Tal; Delegach, Marianna

    2015-09-01

    This study examined the underlying mechanisms through which transformational and transactional leadership influence employee safety behaviors. Linking leadership theory with self-regulatory focus (SRF) theory, we examined a model of dual effects of leadership on safety initiative and safety compliance behaviors as mediated by promotion and prevention self-regulations. We conducted an experimental study (N = 107), an online study (N = 99) and a field study (N = 798 employees and 49 managers). Results demonstrated that followers' situational promotion focus mediated the positive relationship between transformational leadership and safety initiative behaviors. Through all 3 studies, transactional active leadership was positively associated with followers' situational prevention focus, however, the association between followers' prevention focus and safety compliance behaviors was inconsistent, showing the expected mediation relationships in the experimental setting, but not in the online and field studies. We discuss theoretical and practical implications of the findings. (c) 2015 APA, all rights reserved).

  8. Improving Performance: Leading from the Bottom. PISA in Focus. No. 2

    Science.gov (United States)

    OECD Publishing (NJ1), 2011

    2011-01-01

    Since the PISA (Programme for International Student Assessment) 2000 and 2009 surveys both focused on reading, one can track in detail how student reading performance has changed over that period. Among the 26 OECD (Organisation for Economic Cooperation and Development) countries with comparable results in both assessments, Chile, Germany,…

  9. Mutually exclusive STAT1 modifications identified by Ubc9/substrate dimerization-dependent SUMOylation.

    Science.gov (United States)

    Zimnik, Susan; Gaestel, Matthias; Niedenthal, Rainer

    2009-03-01

    Post-translational modifications control the physiological activity of the signal transducer and activator of transcription STAT1. While phosphorylation at tyrosine Y701 is a prerequisite for STAT1 dimerization, its SUMOylation represses the transcriptional activity. Recently, we have demonstrated that SUMOylation at lysine K703 inhibits the phosphorylation of nearby localized Y701 of STAT1. Here, we analysed the influence of phosphorylation of Y701 on SUMOylation of K703 in vivo. For that reason, an Ubc9/substrate dimerization-dependent SUMOylation (USDDS) system was developed, which consists of fusions of the SUMOylation substrate and of the SUMO-conjugating enzyme Ubc9 to the chemically activatable heterodimerization domains FKBP and FRB, respectively. When FKBP fusion proteins of STAT1, p53, CRSP9, FOS, CSNK2B, HES1, TCF21 and MYF6 are coexpressed with Ubc9-FRB, treatment of HEK293 cells with the rapamycin-related dimerizer compound AP21967 induces SUMOylation of these proteins in vivo. For STAT1-FKBP and p53-FKBP we show that this SUMOylation takes place at their specific SUMOylation sites in vivo. Using USDDS, we then demonstrate that STAT1 phosphorylation at Y701 induced by interferon-beta treatment inhibits SUMOylation of K703 in vivo. Thus, pY701 and SUMO-K703 of STAT1 represent mutually exclusive modifications, which prevent signal integration at this molecule and probably ensure the existence of differentially modified subpopulations of STAT1 necessary for its regulated nuclear cytoplasmic activation/inactivation cycle.

  10. MEL-18 interacts with HSF2 and the SUMO E2 UBC9 to inhibit HSF2 sumoylation.

    Science.gov (United States)

    Zhang, Jie; Goodson, Michael L; Hong, Yiling; Sarge, Kevin D

    2008-03-21

    In a previous study we found that sumoylation of the DNA-binding protein heat shock factor 2 (HSF2) is up-regulated during mitosis, but the mechanism that mediates this regulation was unknown. Here we show that HSF2 interacts with the polycomb protein MEL-18, that this interaction decreases during mitosis, and that overexpression and RNA interference-mediated reduction of MEL-18 result in decreased and increased HSF2 sumoylation, respectively. Other results suggest that MEL-18 may also function to inhibit the sumoylation of other cellular proteins. The results also show that MEL-18 is able to interact with the small ubiquitin-like modifier (SUMO) ubiquitin carrier protein (E2) enzyme UBC9 and that MEL-18 inhibits the ability of UBC9 to transfer the SUMO protein to target proteins. Together, the results in this work suggest a mechanism in which MEL-18 bound to HSF2 inhibits its sumoylation by binding to and inhibiting the activity of UBC9 enzymes in the vicinity of HSF2. These results provide an explanation for how mitotic HSF2 sumoylation is regulated and suggest that MEL-18, in contrast to the sumoylation-stimulating activities of the polycomb protein PC2, actually functions like an anti-SUMO ubiquitin-protein isopeptide ligase (E3), interacting both with HSF2 and the SUMO E2 UBC9 but acting to inhibit UBC9 activity to decrease sumoylation of a target protein, in this case that of HSF2.

  11. Literature in Focus - “At the Leading Edge: the ATLAS and CMS LHC experiments”

    CERN Document Server

    CERN Library

    2010-01-01

    edited by Dan Green Too often descriptions of detectors focus on the “what” and not the “why”. This volume aims to elucidate how the requirements of the physics at the Large Hadron Collider (LHC) define the detector environment. In turn, the detector choices are made to adapt to that environment. The goal of LHC physics is to explore the mechanism for electroweak symmetry breaking. Because of the minuscule cross-sections which need to be explored, 0.1 fb, the LHC needs to provide 100 fb-1/yr, or an instantaneous luminosity of 1034 / (cm2 sec). With a bunch crossing interval of 25 nsec, well-matched to detector speeds, there will be 25 events occupying each bunch crossing. Thus the physics requires fast, finely segmented, low noise and radiation-resistant detectors which provide redundant measurements of the rarely produced electrons and muons. To achieve those goals, new ground was broken in constructing the A Toroidal LHC ApparatuS (ATLAS) and Compact Muon Soleno...

  12. Ectopic expression of ubiquitin-conjugating enzyme gene from wild rice, OgUBC1, confers resistance against UV-B radiation and Botrytis infection in Arabidopsis thaliana

    International Nuclear Information System (INIS)

    Jeon, En Hee; Pak, Jung Hun; Kim, Mi Jin; Kim, Hye Jeong; Shin, Sang Hyun; Lee, Jai Heon; Kim, Doh Hoon; Oh, Ju Sung; Oh, Boung-Jun; Jung, Ho Won; Chung, Young Soo

    2012-01-01

    Highlights: ► We isolated a novel E2 ubiquitin-conjugating enzyme from leaves of wild rice plants. ► The OgUBC1 was highly expressed in leaves treated with SA and UV-B radiation. ► The recombinant OgUBC1 has an enzymatic activity of E2 in vitro. ► The OgUBC1 could protect disruption of plant cells by UV-B radiation. ► OgUBC1 confers disease resistance and UV-B tolerance in transgenic Arabidopsis plants. -- Abstract: A previously unidentified gene encoding ubiquitin-conjugating enzyme was isolated from leaves of wild rice plant treated with wounding and microbe-associated molecular patterns. The OgUBC1 gene was composed of 148 amino acids and contained a typical active site and 21 ubiquitin thioester intermediate interaction residues and 4 E3 interaction residues. Both exogenous application of salicylic acid and UV-B irradiation triggered expression of OgUBC1 in leaves of wild rice. Recombinant OgUBC1 proteins bound to ubiquitins in vitro, proposing that the protein might act as E2 enzyme in planta. Heterologous expression of the OgUBC1 in Arabidopsis thaliana protected plants from cellular damage caused by an excess of UV-B radiation. A stable expression of chalcone synthase gene was detected in leaves of OgUBC1-expressing Arabidopsis, resulting in producing higher amounts of anthocyanin than those in wild-type Col-0 plants. Additionally, both pathogenesis-related gene1 and 5 were transcribed in the transgenic Arabidopsis in the absence of pathogen infection. The OgUBC1-expressing plants were resistant to the infection of Botrytis cinerea. Taken together, we suggested that the OgUBC1 is involved in ubiquitination process important for cellular response against biotic and abiotic stresses in plants.

  13. Ectopic expression of ubiquitin-conjugating enzyme gene from wild rice, OgUBC1, confers resistance against UV-B radiation and Botrytis infection in Arabidopsis thaliana

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, En Hee; Pak, Jung Hun; Kim, Mi Jin; Kim, Hye Jeong [Department of Genetic Engineering, Dong-A University, Busan 604-714 (Korea, Republic of); Shin, Sang Hyun [National Crop Experiment Station, Rural Development Administration, Suwon 441-100 (Korea, Republic of); Lee, Jai Heon; Kim, Doh Hoon; Oh, Ju Sung [Department of Genetic Engineering, Dong-A University, Busan 604-714 (Korea, Republic of); Oh, Boung-Jun [BioControl Center, Jeonnam 516-942 (Korea, Republic of); Jung, Ho Won, E-mail: hwjung@dau.ac.kr [Department of Genetic Engineering, Dong-A University, Busan 604-714 (Korea, Republic of); Chung, Young Soo, E-mail: chungys@dau.ac.kr [Department of Genetic Engineering, Dong-A University, Busan 604-714 (Korea, Republic of)

    2012-10-19

    Highlights: Black-Right-Pointing-Pointer We isolated a novel E2 ubiquitin-conjugating enzyme from leaves of wild rice plants. Black-Right-Pointing-Pointer The OgUBC1 was highly expressed in leaves treated with SA and UV-B radiation. Black-Right-Pointing-Pointer The recombinant OgUBC1 has an enzymatic activity of E2 in vitro. Black-Right-Pointing-Pointer The OgUBC1 could protect disruption of plant cells by UV-B radiation. Black-Right-Pointing-Pointer OgUBC1 confers disease resistance and UV-B tolerance in transgenic Arabidopsis plants. -- Abstract: A previously unidentified gene encoding ubiquitin-conjugating enzyme was isolated from leaves of wild rice plant treated with wounding and microbe-associated molecular patterns. The OgUBC1 gene was composed of 148 amino acids and contained a typical active site and 21 ubiquitin thioester intermediate interaction residues and 4 E3 interaction residues. Both exogenous application of salicylic acid and UV-B irradiation triggered expression of OgUBC1 in leaves of wild rice. Recombinant OgUBC1 proteins bound to ubiquitins in vitro, proposing that the protein might act as E2 enzyme in planta. Heterologous expression of the OgUBC1 in Arabidopsis thaliana protected plants from cellular damage caused by an excess of UV-B radiation. A stable expression of chalcone synthase gene was detected in leaves of OgUBC1-expressing Arabidopsis, resulting in producing higher amounts of anthocyanin than those in wild-type Col-0 plants. Additionally, both pathogenesis-related gene1 and 5 were transcribed in the transgenic Arabidopsis in the absence of pathogen infection. The OgUBC1-expressing plants were resistant to the infection of Botrytis cinerea. Taken together, we suggested that the OgUBC1 is involved in ubiquitination process important for cellular response against biotic and abiotic stresses in plants.

  14. Cellular Ubc2/Rad6 E2 ubiquitin-conjugating enzyme facilitates tombusvirus replication in yeast and plants

    International Nuclear Information System (INIS)

    Imura, Yoshiyuki; Molho, Melissa; Chuang, Chingkai; Nagy, Peter D.

    2015-01-01

    Mono- and multi-ubiquitination alters the functions and subcellular localization of many cellular and viral proteins. Viruses can co-opt or actively manipulate the ubiquitin network to support viral processes or suppress innate immunity. Using yeast (Saccharomyces cerevisiae) model host, we show that the yeast Rad6p (radiation sensitive 6) E2 ubiquitin-conjugating enzyme and its plant ortholog, AtUbc2, interact with two tombusviral replication proteins and these E2 ubiquitin-conjugating enzymes could be co-purified with the tombusvirus replicase. We demonstrate that TBSV RNA replication and the mono- and bi-ubiquitination level of p33 is decreased in rad6Δ yeast. However, plasmid-based expression of AtUbc2p could complement both defects in rad6Δ yeast. Knockdown of UBC2 expression in plants also decreases tombusvirus accumulation and reduces symptom severity, suggesting that Ubc2p is critical for virus replication in plants. We provide evidence that Rad6p is involved in promoting the subversion of Vps23p and Vps4p ESCRT proteins for viral replicase complex assembly. - Highlights: • Tombusvirus p33 replication protein interacts with cellular RAD6/Ubc2 E2 enzymes. • Deletion of RAD6 reduces tombusvirus replication in yeast. • Silencing of UBC2 in plants inhibits tombusvirus replication. • Mono- and bi-ubiquitination of p33 replication protein in yeast and in vitro. • Rad6p promotes the recruitment of cellular ESCRT proteins into the tombusvirus replicase

  15. Cellular Ubc2/Rad6 E2 ubiquitin-conjugating enzyme facilitates tombusvirus replication in yeast and plants

    Energy Technology Data Exchange (ETDEWEB)

    Imura, Yoshiyuki, E-mail: imura@brs.nihon-u.ac.jp; Molho, Melissa; Chuang, Chingkai; Nagy, Peter D., E-mail: pdnagy2@uky.edu

    2015-10-15

    Mono- and multi-ubiquitination alters the functions and subcellular localization of many cellular and viral proteins. Viruses can co-opt or actively manipulate the ubiquitin network to support viral processes or suppress innate immunity. Using yeast (Saccharomyces cerevisiae) model host, we show that the yeast Rad6p (radiation sensitive 6) E2 ubiquitin-conjugating enzyme and its plant ortholog, AtUbc2, interact with two tombusviral replication proteins and these E2 ubiquitin-conjugating enzymes could be co-purified with the tombusvirus replicase. We demonstrate that TBSV RNA replication and the mono- and bi-ubiquitination level of p33 is decreased in rad6Δ yeast. However, plasmid-based expression of AtUbc2p could complement both defects in rad6Δ yeast. Knockdown of UBC2 expression in plants also decreases tombusvirus accumulation and reduces symptom severity, suggesting that Ubc2p is critical for virus replication in plants. We provide evidence that Rad6p is involved in promoting the subversion of Vps23p and Vps4p ESCRT proteins for viral replicase complex assembly. - Highlights: • Tombusvirus p33 replication protein interacts with cellular RAD6/Ubc2 E2 enzymes. • Deletion of RAD6 reduces tombusvirus replication in yeast. • Silencing of UBC2 in plants inhibits tombusvirus replication. • Mono- and bi-ubiquitination of p33 replication protein in yeast and in vitro. • Rad6p promotes the recruitment of cellular ESCRT proteins into the tombusvirus replicase.

  16. Subsurface Contaminants Focus Area (SCFA) Lead Laboratory Providing Technical Assistance to the DOE Weapons Complex in Subsurface Contamination

    International Nuclear Information System (INIS)

    Wright, J. A. Jr.; Corey, J. C.

    2002-01-01

    The Subsurface Contaminants Focus Area (SCFA), a DOE-HQ EM-50 organization, is hosted and managed at the Savannah River Site in Aiken, South Carolina. SCFA is an integrated program chartered to find technology and scientific solutions to address DOE subsurface environmental restoration problems throughout the DOE Weapons Complex. Since its inception in 1989, the SCFA program has resulted in a total of 269 deployments of 83 innovative technologies. Until recently, the primary thrust of the program has been to develop, demonstrate, and deploy those remediation technology alternatives that are solutions to technology needs identified by the DOE Sites. Over the last several years, the DOE Sites began to express a need not only for innovative technologies, but also for technical assistance. In response to this need, DOE-HQ EM-50, in collaboration with and in support of a Strategic Lab Council recommendation directed each of its Focus Areas to implement a Lead Laboratory Concept to enhance their technical capabilities. Because each Focus Area is unique as defined by the contrast in either the type of contaminants involved or the environments in which they are found, the Focus Areas were given latitude in how they set up and implemented the Lead Lab Concept. The configuration of choice for the SCFA was a Lead-Partner Lab arrangement. Savannah River Technology Center (SRTC) teamed with the SCFA as the Focus Area's Lead Laboratory. SRTC then partnered with the DOE National Laboratories to create a virtual consulting function within DOE. The National Laboratories were established to help solve the Nation's most difficult problems, drawing from a resource pool of the most talented and gifted scientists and engineers. Following that logic, SRTC, through the Lead-Partner Lab arrangement, has that same resource base to draw from to provide assistance to any SCFA DOE customer throughout the Complex. This paper briefly describes how this particular arrangement is organized and

  17. Are We Doing Any Good? A Value-Added Analysis of UBC's Science One Program

    Directory of Open Access Journals (Sweden)

    Chris Waltham

    2012-12-01

    Full Text Available Science One is a full academic year interdisciplinary alternative to the traditional first-year experience in the Faculty of Science at the University of British Columbia (UBC. Anecdotal reports suggest that alumni/ae of the program do very well in upper-level classes and many become successful graduate and medical students. The high faculty/student ratio makes the program an expensive one, however, and thus we have sought rigorous evidence of the benefits to our students. Our approach has been a value-added one; we have compared high-school and upper-level undergraduate grades for students in all UBC's first-year science programs. We have found a clear signal that there is a large benefit to participating in Science One, and conclude that this arises from a combination of the recruitment of enthusiastic students who are up for a challenge, the Science One admissions process, and taking the program itself.Science One consiste en une année scolaire interdisciplinaire complète qui représente une variante de l’expérience traditionnelle vécue en première année à la Faculté des sciences de l’Université de la Colombie-Britannique (UBC. Des rapports isolés suggèrent que les anciens étudiants du programme obtiennent de très bons résultats dans les cours de niveau supérieur et plusieurs obtiennent leur diplôme avec succès et étudient en médecine. Cependant, le ratio élevé enseignant/étudiant fait en sorte que le programme coûte cher, c’est pourquoi les auteurs ont cherché à obtenir des données probantes sur les avantages qu’il présente pour leurs étudiants. Ils ont employé la méthode de la valeur ajoutée; ont comparé les notes obtenues au secondaire et celles des étudiants de premier cycle inscrits à des cours de niveau supérieur dans tous les programmes scientifiques offerts à l’UBC. Ils ont découvert que la participation à Science One est très bénéfique et ont conclu que cela résulte d

  18. Caspase recruitment domain of procaspase-2 could be a target for SUMO-1 modification through Ubc9

    International Nuclear Information System (INIS)

    Shirakura, Hiromi; Hayashi, Naoko; Ogino, Shin-ichi; Tsuruma, Kazuhiro; Uehara, Takashi; Nomura, Yasuyuki

    2005-01-01

    To identify the binding proteins that regulate the function of procaspase-2, we screened for proteins using the yeast two-hybrid method and isolated human Ubc9 and SUMO-1 as the candidates. Ubc9 and SUMO-1 interacted with the caspase recruitment domain of procaspase-2 in its N-terminal. We elucidated the covalent modification of procaspase-2 by SUMO-1 in mammalian cells by immunoprecipitation followed by Western blot analysis. Procaspase-2 and SUMO-1 were co-localized by dot-like structures in the nucleus that are related to promyelocytic leukemia bodies. Interestingly, a conjugation-deficient mutant (K60R) procaspase-2 resulted in a delay of its enzyme maturation (appearance of p12 subunit) compared to that of wild-type. Thus, the modification with SUMO-1 may play a critical role in the nuclear localization and the activation (maturation) of procaspase-2

  19. Estrogen receptor alpha and nuclear factor Y coordinately regulate the transcription of the SUMO-conjugating UBC9 gene in MCF-7 breast cancer cells.

    Directory of Open Access Journals (Sweden)

    Shibo Ying

    Full Text Available UBC9 encodes a protein that conjugates small ubiquitin-related modifier (SUMO to target proteins thereby changing their functions. Recently, it was noted that UBC9 expression and activity play a role in breast tumorigenesis and response to anticancer drugs. However, the underlying mechanism is poorly understood. To investigate the transcriptional regulation of the UBC9 gene, we identified and characterized its promoter and cis-elements. Promoter activity was tested using luciferase reporter assays. The binding of transcription factors to the promoter was detected by chromatin immunoprecipitation (ChIP, and their functional role was confirmed by siRNA knockdown. UBC9 mRNA and protein levels were measured by quantitative reverse transcription PCR and Western blot analysis, respectively. An increased expression of UBC9 mRNA and protein was found in MCF-7 breast cancer cells treated with 17β-estradiol (E2. Analysis of various deletion mutants revealed a 137 bp fragment upstream of the transcription initiation site to be sufficient for reporter gene transcription. Mutations of putative estrogen receptor α (ER-α (one imperfect estrogen response element, ERE and/or nuclear factor Y (NF-Y binding sites (two CCAAT boxes markedly reduced promoter activity. Similar results were obtained in ER-negative MDA-MB-231 cells except that the ERE mutation did not affect promoter activity. Additionally, promoter activity was stimulated upon E2 treatment and overexpression of ER-α or NF-YA in MCF-7 cells. ChIP confirmed direct binding of both transcription factors to the UBC9 promoter in vivo. Furthermore, UBC9 expression was diminished by ER-α and NF-Y siRNAs on the mRNA and protein levels. In conclusion, we identified the proximal UBC9 promoter and provided evidence that ER-α and NF-Y regulate UBC9 expression on the transcriptional level in response to E2 in MCF-7 cells. These findings may contribute to a better understanding of the regulation of UBC9 in ER

  20. Estrogen receptor alpha and nuclear factor Y coordinately regulate the transcription of the SUMO-conjugating UBC9 gene in MCF-7 breast cancer cells.

    Science.gov (United States)

    Ying, Shibo; Dünnebier, Thomas; Si, Jing; Hamann, Ute

    2013-01-01

    UBC9 encodes a protein that conjugates small ubiquitin-related modifier (SUMO) to target proteins thereby changing their functions. Recently, it was noted that UBC9 expression and activity play a role in breast tumorigenesis and response to anticancer drugs. However, the underlying mechanism is poorly understood. To investigate the transcriptional regulation of the UBC9 gene, we identified and characterized its promoter and cis-elements. Promoter activity was tested using luciferase reporter assays. The binding of transcription factors to the promoter was detected by chromatin immunoprecipitation (ChIP), and their functional role was confirmed by siRNA knockdown. UBC9 mRNA and protein levels were measured by quantitative reverse transcription PCR and Western blot analysis, respectively. An increased expression of UBC9 mRNA and protein was found in MCF-7 breast cancer cells treated with 17β-estradiol (E2). Analysis of various deletion mutants revealed a 137 bp fragment upstream of the transcription initiation site to be sufficient for reporter gene transcription. Mutations of putative estrogen receptor α (ER-α) (one imperfect estrogen response element, ERE) and/or nuclear factor Y (NF-Y) binding sites (two CCAAT boxes) markedly reduced promoter activity. Similar results were obtained in ER-negative MDA-MB-231 cells except that the ERE mutation did not affect promoter activity. Additionally, promoter activity was stimulated upon E2 treatment and overexpression of ER-α or NF-YA in MCF-7 cells. ChIP confirmed direct binding of both transcription factors to the UBC9 promoter in vivo. Furthermore, UBC9 expression was diminished by ER-α and NF-Y siRNAs on the mRNA and protein levels. In conclusion, we identified the proximal UBC9 promoter and provided evidence that ER-α and NF-Y regulate UBC9 expression on the transcriptional level in response to E2 in MCF-7 cells. These findings may contribute to a better understanding of the regulation of UBC9 in ER

  1. Inhibition of Ubc13-mediated Ubiquitination by GPS2 Regulates Multiple Stages of B Cell Development.

    Science.gov (United States)

    Lentucci, Claudia; Belkina, Anna C; Cederquist, Carly T; Chan, Michelle; Johnson, Holly E; Prasad, Sherry; Lopacinski, Amanda; Nikolajczyk, Barbara S; Monti, Stefano; Snyder-Cappione, Jennifer; Tanasa, Bogdan; Cardamone, M Dafne; Perissi, Valentina

    2017-02-17

    Non-proteolytic ubiquitin signaling mediated by Lys 63 ubiquitin chains plays a critical role in multiple pathways that are key to the development and activation of immune cells. Our previous work indicates that GPS2 (G-protein Pathway Suppressor 2) is a multifunctional protein regulating TNFα signaling and lipid metabolism in the adipose tissue through modulation of Lys 63 ubiquitination events. However, the full extent of GPS2-mediated regulation of ubiquitination and the underlying molecular mechanisms are unknown. Here, we report that GPS2 is required for restricting the activation of TLR and BCR signaling pathways and the AKT/FOXO1 pathway in immune cells based on direct inhibition of Ubc13 enzymatic activity. Relevance of this regulatory strategy is confirmed in vivo by B cell-targeted deletion of GPS2, resulting in developmental defects at multiple stages of B cell differentiation. Together, these findings reveal that GPS2 genomic and non-genomic functions are critical for the development and cellular homeostasis of B cells. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  2. Usefulness of Bladder Tumour Antigen (BTA) and Urinary Bladder Cancer test (UBC) in Transitional Cell Bladder Cancer (TCC) diagnosis and follow-up

    International Nuclear Information System (INIS)

    Nuvoli, S.; Spanu, A.; Masia, A.; Mulas, A.; Falchi, A.; Solinas, M.E.; Marrosu, A.; Madeddu, G.; Mocci, A.

    2002-01-01

    Aim: We evaluated BTA and UBC clinical utility in TCC diagnosis and follow-up. Materials and Methods: We enrolled consecutively 96 untreated TCC, 73 other genitourinary carcinomas (OC), 106 benign genitourinary diseases (BD) and 75 normal controls (C). After trans-urethral resection (TUR), TCC were classified by clinical staging (9 Ta, 27 T1, 32 T2, 20 T3 and 8 T4) and pathological grading (14 G1, 28 G2, 41 G3 and 13 G4). Urine BTA and UBC were assayed by monoclonal antibody methods, IEMA and IRMA, respectively (cut-off:14 U/ml and 8 μg/l, respectively). Results: Sensitivity, specificity, PPV, NPV and accuracy were 83.6%, 75.1%, 64.6%, 89.% and 72.4%, respectively for BTA and 53.1%, 89.4%, 72.8%, 78% and 75.6%, respectively for UBC. BTA and UBC specificities were determined combining OC and BD data, although UBC reached the highest value in OC (93.15%). Sensitivity and specificity differences between the two markers were significant (p<0.00001). BTA and UBC sensitivity and mean values significantly increased with progressive staging and grading. Moreover, marker levels were significantly higher in TCC compared to OC, BD and C. Seventy-one high stage and/or grade TCC underwent radical cystectomy, while 25 were monitored after TUR (14 cases: group A) or segmental cystectomy (11 cases: group B) for 8-32 months by periodical clinical examination, cystoscopy and urinary BTA and UBC assays. During follow-up, 9 group A cases developed recurrences and 5 were NED. BTA was elevated in 8/9 cases (88.8%) with recurrence, while borderline in the remaining one. UBC was above cut-off in 6/9 cases (66.6%) all with high BTA, while low in the remaining 3, confirming first observation data. Both marker increases preceded by several months the cystoscopic evidence of recurrence. In NED patients, BTA was low in all cases (100%), while UBC was under cut-off in 4/5 cases (80%) and slightly high in the remaining asymptomatic patient. Ten group B patients developed local recurrences

  3. "Common" lead isotopic measurements in silicate glasses and minerals by laser ablation double-focusing SC-ICPMS (2017)

    Data.gov (United States)

    Department of the Interior — This dataset is related to a 2017 journal article by A. J. Pietruszka and L. A. Neymark titled "Evaluation of laser ablation double-focusing SC-ICPMS for “common”...

  4. Development of a compact HTS lead unit for the SC correction coils of the SuperKEKB final focusing magnet system

    Energy Technology Data Exchange (ETDEWEB)

    Zong, Zhanguo, E-mail: zhanguo.zong@kek.jp; Ohuchi, Norihito; Tsuchiya, Kiyosumi; Arimoto, Yasushi

    2016-09-11

    Forty-three superconducting (SC) correction coils with maximum currents of about 60 A are installed in the SuperKEKB final focusing magnet system. Current leads to energize the SC correction coils should have an affordable heat load and fit the spatial constraints in the service cryostat where the current leads are installed. To address the requirements, design optimization of individual lead was performed with vapor cooled current lead made of a brass material, and a compact unit was designed to accommodate eight current leads together in order to be installed with one port in the service cryostat. The 2nd generation high temperature SC (HTS) tape was adopted and soldered at the cold end of the brass current lead to form a hybrid HTS lead structure. A prototype of the compact lead unit with HTS tape was constructed and tested with liquid helium (LHe) environment. This paper presents a cryogenic measurement system to simulate the real operation conditions in the service cryostat, and analysis of the experimental results. The measured results showed excellent agreement with the theoretical analysis and numerical simulation. In total, 11 sets of the compact HTS lead units were constructed for the 43 SC correction coils at KEK. One set from the mass production was tested in cryogenic conditions, and exhibited the same performance as the prototype. The compact HTS lead unit can feed currents to four SC correction coils simultaneously with the simple requirement of controlling and monitoring helium vapor flow, and has a heat load of about 0.762 L/h in terms of LHe consumption. - Highlights: • The requirements of the SC correction coils on current leads are introduced. • The optimum design of the brass vapor cooled current lead is described. • The compact structure of eight leads with HTS tape is presented. • The theoretical, numerical, and experimental results are compared. • The current lead heat load is evaluated for cryogenic system.

  5. A cost-saving statistically based screening technique for focused sampling of a lead-contaminated site

    International Nuclear Information System (INIS)

    Moscati, A.F. Jr.; Hediger, E.M.; Rupp, M.J.

    1986-01-01

    High concentrations of lead in soils along an abandoned railroad line prompted a remedial investigation to characterize the extent of contamination across a 7-acre site. Contamination was thought to be spotty across the site reflecting its past use in battery recycling operations at discrete locations. A screening technique was employed to delineate the more highly contaminated areas by testing a statistically determined minimum number of random samples from each of seven discrete site areas. The approach not only quickly identified those site areas which would require more extensive grid sampling, but also provided a statistically defensible basis for excluding other site areas from further consideration, thus saving the cost of additional sample collection and analysis. The reduction in the number of samples collected in ''clean'' areas of the site ranged from 45 to 60%

  6. Damage of reactor buildings occurred at the Fukushima Daiichi accident. Focusing on sequence leading to hydrogen explosions

    International Nuclear Information System (INIS)

    Naito, Masanori

    2011-01-01

    Fukushima Daiichi accident discharged enormous radioactive materials confined inside into the environment due to hydrogen explosions occurred at reactor buildings and forced many people to live the refugee life. This article described overview of Great East Japan Earthquake, specifications of Fukushima Daiichi nuclear power plants, sequence of plant status after earthquake occurrence and computerized simulation of plant behavior of Unit 1 leading to core melt and hydrogen explosion. Simulation results with estimated and assumed conditions showed water level decreased to bottom of reactor core after 4 hrs and 15 minutes passed, core melt started after 6 hrs and 49 minutes passed, failure of core support plate after 7 hrs and 18 minutes passed and through failure of penetration at bottom of pressure vessel after 7 hrs and 25 minutes passed. Hydrogen concentration at operating floor of reactor building of Unit 1 would be 15% accumulated and the pressure would amount to about 5 bars after hydrogen explosion if reactor building did not rupture with leak-tight structure. Since reactor building was not pressure-proof structure, walls of operating floor would rupture before 5 bars attained. (T. Tanaka)

  7. Interruption of infection transmission in the onchocerciasis focus of Ecuador leading to the cessation of ivermectin distribution.

    Directory of Open Access Journals (Sweden)

    Raquel Lovato

    2014-05-01

    Full Text Available INTRODUCTION: A clinically significant endemic focus of onchocerciasis existing in Esmeraldas Province, coastal Ecuador has been under an ivermectin mass drug administration program since 1991. The main transmitting vector in this area is the voracious blackfly, Simulium exiguum. This paper describes the assessments made that support the decision to cease mass treatment. METHODOLOGY AND PRINCIPLE FINDINGS: Thirty-five rounds of ivermectin treatment occurred between 1991-2009 with 29 of these carrying >85% coverage. Following the guidelines set by WHO for ceasing ivermectin distribution the impact on parasite transmission was measured in the two vector species by an O-150 PCR technique standard for assessing for the presence of Onchocerca volvulus. Up to seven collection sites in three major river systems were tested on four occasions between 1995 and 2008. The infectivity rates of 65.0 (CI 39-101 and 72.7 (CI 42-116 in 1995 dropped to zero at all seven collection sites by 2008. Assessment for the presence of antibodies against O. volvulus was made in 2001, 2006, 2007 and 2008 using standard ELISA assays for detecting anti-Ov16 antibodies. None of total of 1810 children aged 1-15 years (between 82 and 98% of children present in the surveyed villages tested in the above years were found to be carrying antibodies to this antigen. These findings were the basis for the cessation of mass drug treatment with ivermectin in 2009. SIGNIFICANCE: This fulfillment of the criteria for cessation of mass distribution of ivermectin in the only known endemic zone of onchocerciasis in Ecuador moves the country into the surveillance phase of official verification for national elimination of transmission of infection. These findings indicate that ivermectin given twice a year with greater than 85% of the community can move a program to the final stages of verification of transmission interruption.

  8. Interruption of infection transmission in the onchocerciasis focus of Ecuador leading to the cessation of ivermectin distribution.

    Science.gov (United States)

    Lovato, Raquel; Guevara, Angel; Guderian, Ronald; Proaño, Roberto; Unnasch, Thomas; Criollo, Hipatia; Hassan, Hassan K; Mackenzie, Charles D

    2014-05-01

    A clinically significant endemic focus of onchocerciasis existing in Esmeraldas Province, coastal Ecuador has been under an ivermectin mass drug administration program since 1991. The main transmitting vector in this area is the voracious blackfly, Simulium exiguum. This paper describes the assessments made that support the decision to cease mass treatment. Thirty-five rounds of ivermectin treatment occurred between 1991-2009 with 29 of these carrying >85% coverage. Following the guidelines set by WHO for ceasing ivermectin distribution the impact on parasite transmission was measured in the two vector species by an O-150 PCR technique standard for assessing for the presence of Onchocerca volvulus. Up to seven collection sites in three major river systems were tested on four occasions between 1995 and 2008. The infectivity rates of 65.0 (CI 39-101) and 72.7 (CI 42-116) in 1995 dropped to zero at all seven collection sites by 2008. Assessment for the presence of antibodies against O. volvulus was made in 2001, 2006, 2007 and 2008 using standard ELISA assays for detecting anti-Ov16 antibodies. None of total of 1810 children aged 1-15 years (between 82 and 98% of children present in the surveyed villages) tested in the above years were found to be carrying antibodies to this antigen. These findings were the basis for the cessation of mass drug treatment with ivermectin in 2009. This fulfillment of the criteria for cessation of mass distribution of ivermectin in the only known endemic zone of onchocerciasis in Ecuador moves the country into the surveillance phase of official verification for national elimination of transmission of infection. These findings indicate that ivermectin given twice a year with greater than 85% of the community can move a program to the final stages of verification of transmission interruption.

  9. Interruption of Infection Transmission in the Onchocerciasis Focus of Ecuador Leading to the Cessation of Ivermectin Distribution

    Science.gov (United States)

    Lovato, Raquel; Guevara, Angel; Guderian, Ronald; Proaño, Roberto; Unnasch, Thomas; Criollo, Hipatia; Hassan, Hassan K.; Mackenzie, Charles D.

    2014-01-01

    Introduction: A clinically significant endemic focus of onchocerciasis existing in Esmeraldas Province, coastal Ecuador has been under an ivermectin mass drug administration program since 1991. The main transmitting vector in this area is the voracious blackfly, Simulium exiguum. This paper describes the assessments made that support the decision to cease mass treatment. Methodology and Principle Findings: Thirty-five rounds of ivermectin treatment occurred between 1991–2009 with 29 of these carrying >85% coverage. Following the guidelines set by WHO for ceasing ivermectin distribution the impact on parasite transmission was measured in the two vector species by an O-150 PCR technique standard for assessing for the presence of Onchocerca volvulus. Up to seven collection sites in three major river systems were tested on four occasions between 1995 and 2008. The infectivity rates of 65.0 (CI 39–101) and 72.7 (CI 42–116) in 1995 dropped to zero at all seven collection sites by 2008. Assessment for the presence of antibodies against O. volvulus was made in 2001, 2006, 2007 and 2008 using standard ELISA assays for detecting anti-Ov16 antibodies. None of total of 1810 children aged 1–15 years (between 82 and 98% of children present in the surveyed villages) tested in the above years were found to be carrying antibodies to this antigen. These findings were the basis for the cessation of mass drug treatment with ivermectin in 2009. Significance: This fulfillment of the criteria for cessation of mass distribution of ivermectin in the only known endemic zone of onchocerciasis in Ecuador moves the country into the surveillance phase of official verification for national elimination of transmission of infection. These findings indicate that ivermectin given twice a year with greater than 85% of the community can move a program to the final stages of verification of transmission interruption. PMID:24853587

  10. Measurement of erosion of stainless steel by molten lead-free solder using micro-focus x-ray CT system

    International Nuclear Information System (INIS)

    Nishikawa, Hiroshi; Takemoto, Tadashi; Kang, Songai

    2009-01-01

    The severe erosion damage, which is caused by a molten lead-free solder, of wave solder equipment made into stainless steel has been encountered in operation. Then, the higher maintenance frequency and reduced life time of wave solder machine component is a serious issue in a manufacturing process. In this study, the evaluation method of erosion of stainless steel by molten lead-free solders was investigated using micro-focus X-ray systems for fluoroscopic and computed tomography (CT). As a result, it was found that the fluoroscopic image could truly reconstruct the cross-shape of the stainless steel sample after immersion test without destruction. In the case of X-ray systems for fluoroscopic and CT used in this study, three-dimensional data can be obtained. Therefore, it was possible to easily check the whole picture of the test sample after immersion test and to decide the maximum erosion depth of test sample. (author)

  11. Enactment of one-to-many communication may induce self-focused attention that leads to diminished perspective taking: The case of Facebook

    Directory of Open Access Journals (Sweden)

    Wen-Bin Chiou

    2013-05-01

    Full Text Available Social networking sites (SNSs provide users with an efficient interface for distributing information, such as photos or wall posts, to many others simultaneously. We demonstrated experimentally that this type of indiscriminate one-to-many (i.e., monologue communication may induce self-focused attention and thereby impair perspective taking. The present study used multiple paradigms to explore the link between engaging in online one-to-many communication and a decrease in perspective taking. Experiment 1 revealed that Facebookers who published a personal photo to the public or their friends were less likely to adopt another person's visual perspective than were those in the control group. Experiment 2 showed that Facebookers who engaged in indiscriminate one-to-many wall posting were more likely than those in the control group to rely heavily on their own perspectives. A state of self-focus, as measured by greater Stroop interference in naming the color of self-relevant versus neutral words, mediated the detrimental effect of indiscriminate one-to-many communication on cognitive perspective taking. These findings suggest that indiscriminate one-to-many communication on SNSs may promote public self-focus, leading to self-referential processing when making social judgments. Online monologue communication may be more harmful to perspective taking than previously understood.

  12. Structure of a SUMO-binding-motif mimic bound to Smt3p–Ubc9p: conservation of a noncovalent Ubiquitin-like protein–E2 complex as a platform for selective interactions within a SUMO pathway

    Science.gov (United States)

    Duda, David M.; van Waardenburg, Robert C. A. M.; Borg, Laura A.; McGarity, Sierra; Nourse, Amanda; Waddell, M. Brett; Bjornsti, Mary-Ann; Schulman, Brenda A.

    2007-01-01

    Summary The SUMO ubiquitin-like proteins play regulatory roles in cell division, transcription, DNA repair, and protein subcellular localization. Paralleling other ubiquitin-like proteins, SUMO proteins are proteolytically processed to maturity, conjugated to targets by E1-E2-E3 cascades, and subsequently recognized by specific downstream effectors containing a SUMO-binding motif (SBM). SUMO and its E2 from the budding yeast S. cerevisiae, Smt3p and Ubc9p, are encoded by essential genes. Here we describe the 1.9 Å resolution crystal structure of a noncovalent Smt3p–Ubc9p complex. Unexpectedly, a heterologous portion of the crystallized complex derived from the expression construct mimics an SBM, and binds Smt3p in a manner resembling SBM binding to human SUMO family members. In the complex, Smt3p binds a surface distal from Ubc9's catalytic cysteine. The structure implies that a single molecule of Smt3p cannot bind concurrently to both the noncovalent binding site and the catalytic cysteine of a single Ubc9p molecule. However, formation of higher-order complexes can occur, where a single Smt3p covalently linked to one Ubc9p's catalytic cysteine also binds noncovalently to another molecule of Ubc9p. Comparison with other structures from the SUMO pathway suggests that formation of the noncovalent Smt3p–Ubc9p complex occurs mutually exclusively with many other Smt3p and Ubc9p interactions in the conjugation cascade. By contrast, high-resolution insights into how Smt3p–Ubc9p can also interact with downstream recognition machineries come from contacts with the SBM mimic. Interestingly, the overall architecture of the Smt3p–Ubc9p complex is strikingly similar to recent structures from the ubiquitin pathway. The results imply that noncovalent ubiquitin-like protein–E2 complexes are conserved platforms, which function as parts of larger assemblies involved many protein post-translational regulatory pathways. PMID:17475278

  13. Inadequate environment, resources and values lead to missed nursing care: A focused ethnographic study on the surgical ward using the Fundamentals of Care framework.

    Science.gov (United States)

    Jangland, Eva; Teodorsson, Therese; Molander, Karin; Muntlin Athlin, Åsa

    2018-06-01

    To explore the delivery of care from the perspective of patients with acute abdominal pain focusing on the contextual factors at system level using the Fundamentals of Care framework. The Fundamentals of Care framework describes several contextual and systemic factors that can impact the delivery of care. To deliver high-quality, person-centred care, it is important to understand how these factors affect patients' experiences and care needs. A focused ethnographic approach. A total of 20 observations were performed on two surgical wards at a Swedish university hospital. Data were collected using participant observation and informal interviews and analysed using deductive content analysis. The findings, presented in four categories, reflect the value patients place on the caring relationship and a friendly atmosphere on the ward. Patients had concerns about the environment, particularly the high-tempo culture on the ward and its impact on their integrity, rest and sleep, access to information and planning, and need for support in addressing their existential thoughts. The observers also noted that missed nursing care had serious consequences for patient safety. Patients with acute abdominal pain were cared for in the high-tempo culture of a surgical ward with limited resources, unclear leadership and challenges to patients' safety. The findings highlight the crucial importance of prioritising and valuing the patients' fundamental care needs for recovery. Nursing leaders and nurses need to take the lead to reconceptualise the value of fundamental care in the acute care setting. To improve clinical practice, the value of fundamentals of care must be addressed regardless of patient's clinical condition. Providing a caring relationship is paramount to ensure a positive impact on patient's well-being and recovery. © 2017 John Wiley & Sons Ltd.

  14. Development of a Focused Library of Triazole-Linked Privileged-Structure-Based Conjugates Leading to the Discovery of Novel Phenotypic Hits against Protozoan Parasitic Infections.

    Science.gov (United States)

    Uliassi, Elisa; Piazzi, Lorna; Belluti, Federica; Mazzanti, Andrea; Kaiser, Marcel; Brun, Reto; Moraes, Carolina B; Freitas-Junior, Lucio H; Gul, Sheraz; Kuzikov, Maria; Ellinger, Bernhard; Borsari, Chiara; Costi, Maria Paola; Bolognesi, Maria Laura

    2018-04-06

    Protozoan infections caused by Plasmodium, Leishmania, and Trypanosoma spp. contribute significantly to the burden of infectious diseases worldwide, causing severe morbidity and mortality. The inadequacy of available treatments calls for cost- and time-effective drug discovery endeavors. To this end, we envisaged the triazole linkage of privileged structures as an effective drug design strategy to generate a focused library of high-quality compounds. The versatility of this approach was combined with the feasibility of a phenotypic assay, integrated with early ADME-tox profiling. Thus, an 18-membered library was efficiently assembled via Huisgen cycloaddition of phenothiazine, biphenyl, and phenylpiperazine scaffolds. The resulting 18 compounds were then tested against seven parasite strains, and counter-screened for selectivity against two mammalian cell lines. In parallel, hERG and cytochrome P450 (CYP) inhibition, and mitochondrial toxicity were assessed. Remarkably, 10-((1-(3-([1,1'-biphenyl]-3-yloxy)propyl)-1H-1,2,3-triazol-5-yl)methyl)-10H-phenothiazine (7) and 10-(3-(1-(3-([1,1'-biphenyl]-3-yloxy)propyl)-1H-1,2,3-triazol-4-yl)propyl)-10H-phenothiazine (12) showed respective IC 50 values of 1.8 and 1.9 μg mL -1 against T. cruzi, together with optimal selectivity. In particular, compound 7 showed a promising ADME-tox profile. Thus, hit 7 might be progressed as an antichagasic lead. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. UBC-Nepal expedition

    DEFF Research Database (Denmark)

    Hansen, Alexander B; Hoiland, Ryan L; Lewis, Nia C S

    2018-01-01

    the course of acclimatization to the hypoxia of terrestrial high altitude has not been examined. Thus, the purpose of the present study was to examine the influence of orally ingested antioxidants at clinically relevant doses (vitamins C and E and α-lipoic acid) on cerebrovascular regulation at sea level...... (344 m; n = 12; female n = 2 participants) and at high altitude (5050 m; n = 9; female n = 2) in a randomized, placebo-controlled and double-blinded crossover design. Hypercapnic and hypoxic cerebrovascular reactivity tests of the internal carotid artery (ICA) were conducted at sea level, and global...... that an oral antioxidant cocktail known to attenuate systemic oxidative stress failed to alter cerebrovascular function at sea level and CBF during acclimatization to high altitude....

  16. SUMO modification through rapamycin-mediated heterodimerization reveals a dual role for Ubc9 in targeting RanGAP1 to nuclear pore complexes

    International Nuclear Information System (INIS)

    Zhu Shanshan; Zhang Hong; Matunis, Michael J.

    2006-01-01

    SUMOs (small ubiquitin-related modifiers) are eukaryotic proteins that are covalently conjugated to other proteins and thereby regulate a wide range of important cellular processes. The molecular mechanisms by which SUMO modification influences the functions of most target proteins and cellular processes, however, remain poorly defined. A major obstacle to investigating the effects of SUMO modification is the availability of a system for selectively inducing the modification or demodification of an individual protein. To address this problem, we have developed a procedure using the rapamycin heterodimerizer system. This procedure involves co-expression of rapamycin-binding domain fusion proteins of SUMO and candidate SUMO substrates in living cells. Treating cells with rapamycin induces a tight association between SUMO and a single SUMO substrate, thereby allowing specific downstream effects to be analyzed. Using RanGAP1 as a model SUMO substrate, the heterodimerizer system was used to investigate the molecular mechanism by which SUMO modification targets RanGAP1 from the cytoplasm to nuclear pore complexes (NPCs). Our results revealed a dual role for Ubc9 in targeting RanGAP1 to NPCs: In addition to conjugating SUMO-1 to RanGAP1, Ubc9 is also required to form a stable ternary complex with SUMO-1 modified RanGAP1 and Nup358. As illustrated by our studies, the rapamycin heterodimerizer system represents a novel tool for studying the molecular effects of SUMO modification

  17. Efficacy of DNA double-strand breaks repair in breast cancer is decreased in carriers of the variant allele of the UBC9 gene c.73G>A polymorphism

    Energy Technology Data Exchange (ETDEWEB)

    Synowiec, Ewelina [Department of Molecular Genetics, University of Lodz, Lodz (Poland); Krupa, Renata [Laboratory of DNA Repair, Department of Molecular Genetics, University of Lodz, Banacha 12/16, Lodz (Poland); Morawiec, Zbigniew; Wasylecka, Maja [Department of Surgical Oncology, N. Copernicus Hospital, Lodz (Poland); Dziki, Lukasz; Morawiec, Jan [Department of General and Colorectal Surgery, Medical University of Lodz, Lodz (Poland); Blasiak, Janusz [Department of Molecular Genetics, University of Lodz, Lodz (Poland); Wozniak, Katarzyna, E-mail: wozniak@biol.uni.lodz.pl [Laboratory of DNA Repair, Department of Molecular Genetics, University of Lodz, Banacha 12/16, Lodz (Poland)

    2010-12-10

    UBC9 (E2) SUMO conjugating enzyme plays an important role in the maintenance of genome stability and integrity. In the present work we examined the association between the c.73G>A (Val25Met) polymorphism of the UBC9 gene (rs11553473) and efficacy of DNA double-strand breaks (DSBs) repair (DRE) in breast cancer patients. We determined the level of endogenous (basal) and exogenous (induced by {gamma}-irradiation) DSBs and efficacy of their repair in peripheral blood lymphocytes of 57 breast cancer patients and 70 healthy individuals. DNA damage and repair were studied by neutral comet assay. Genotypes were determined in DNA from peripheral blood lymphocytes by allele-specific PCR (ASO-PCR). We also correlated genotypes with the clinical characteristics of breast cancer patients. We observed a strong association between breast cancer occurrence and the variant allele carried genotypes in patients with elevated level of basal as well as induced DNA damage (OR 6.74, 95% CI 2.27-20.0 and OR 5.33, 95% CI 1.81-15.7, respectively). We also found statistically significant (p < 0.05) difference in DRE related to the c.73G>A polymorphism of the UBC9 gene in breast cancer patients. Carriers of variant allele have decreased DNA DRE as compared to wild type genotype carriers. We did not find any association with the UBC9 gene polymorphism and estrogen and progesterone receptor status. The variant allele of the UBC9 gene polymorphism was strongly inversely related to HER negative breast cancer patients (OR 0.03, 95% CI 0.00-0.23). Our results suggest that the c.73G>A polymorphism of the UBC9 gene may affect DNA DSBs repair efficacy in breast cancer patients.

  18. Efficacy of DNA double-strand breaks repair in breast cancer is decreased in carriers of the variant allele of the UBC9 gene c.73G>A polymorphism

    International Nuclear Information System (INIS)

    Synowiec, Ewelina; Krupa, Renata; Morawiec, Zbigniew; Wasylecka, Maja; Dziki, Lukasz; Morawiec, Jan; Blasiak, Janusz; Wozniak, Katarzyna

    2010-01-01

    UBC9 (E2) SUMO conjugating enzyme plays an important role in the maintenance of genome stability and integrity. In the present work we examined the association between the c.73G>A (Val25Met) polymorphism of the UBC9 gene (rs11553473) and efficacy of DNA double-strand breaks (DSBs) repair (DRE) in breast cancer patients. We determined the level of endogenous (basal) and exogenous (induced by γ-irradiation) DSBs and efficacy of their repair in peripheral blood lymphocytes of 57 breast cancer patients and 70 healthy individuals. DNA damage and repair were studied by neutral comet assay. Genotypes were determined in DNA from peripheral blood lymphocytes by allele-specific PCR (ASO-PCR). We also correlated genotypes with the clinical characteristics of breast cancer patients. We observed a strong association between breast cancer occurrence and the variant allele carried genotypes in patients with elevated level of basal as well as induced DNA damage (OR 6.74, 95% CI 2.27-20.0 and OR 5.33, 95% CI 1.81-15.7, respectively). We also found statistically significant (p A polymorphism of the UBC9 gene in breast cancer patients. Carriers of variant allele have decreased DNA DRE as compared to wild type genotype carriers. We did not find any association with the UBC9 gene polymorphism and estrogen and progesterone receptor status. The variant allele of the UBC9 gene polymorphism was strongly inversely related to HER negative breast cancer patients (OR 0.03, 95% CI 0.00-0.23). Our results suggest that the c.73G>A polymorphism of the UBC9 gene may affect DNA DSBs repair efficacy in breast cancer patients.

  19. Over-accumulation of nuclear IGF-1 receptor in tumor cells requires elevated expression of the receptor and the SUMO-conjugating enzyme Ubc9

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Hua; Lin, Yingbo; Badin, Margherita; Vasilcanu, Daiana; Stroemberg, Thomas [Department of Oncology and Pathology, The Karolinska Institute, Cancer Center Karolinska, SE-17176 Stockholm (Sweden); Jernberg-Wiklund, Helena [Department of Genetics and Pathology, Rudbeck Laboratory, Uppsala University, Uppsala (Sweden); Sehat, Bita [Department of Oncology and Pathology, The Karolinska Institute, Cancer Center Karolinska, SE-17176 Stockholm (Sweden); Larsson, Olle, E-mail: olle.larsson@ki.se [Department of Oncology and Pathology, The Karolinska Institute, Cancer Center Karolinska, SE-17176 Stockholm (Sweden)

    2011-01-14

    Research highlights: {yields} SUMOylation mediates nuclear translocation of IGF-1R which activates transcription. {yields} Here we show that nuclear IGF-1R over-accumulates in tumor cells. {yields} This requires overexpression of the receptor that is a common feature in tumor cells. {yields} An increased expression of the SUMO ligase Ubc9 seems to be an involved mechanism too. -- Abstract: The insulin-like growth factor 1 receptor (IGF-1R) plays crucial roles in tumor cell growth and is overexpressed in many cancers. IGF-1R's trans-membrane kinase signaling pathways have been well characterized. Very recently, we showed that SUMOylation mediates nuclear translocation of the IGF-1R, and that nuclear IGF-1R (nIGF-1R) binds to enhancer regions and activates transcription. We identified three lysine residues in the {beta}-subunit of the receptor and that mutation of these blocks nuclear translocation and gene activation. Furthermore, accumulation of nIGF-1R was proven strongly dependent on the specific SUMO-conjugating enzyme Ubc9. Here we show that nIGF-1R originates solely from the cell membrane and that phosphorylation of the core tyrosine residues of the receptor kinase is crucial for nuclear accumulation. We also compared the levels of nIGF-1R, measured as nuclear/membrane ratios, in tumor and normal cells. We found that the breast cancer cell line MCF-7 has 13-fold higher amounts of nIGF-1R than breast epithelial cells (IME) which showed only a small amount of nIGF-1R. In comparison, the total expression of IGF-1R was only 3.7- higher in MCF-7. Comparison of several other tumor and normal cell lines showed similar tumor cell over-accumulation of nIGF-1R, exceeding the total receptor expression substantially. Ectopic overexpression (>10-fold) of the receptor increased nIGF-1R in IME cells but not to that high level as in wild type MCF-7. The levels of Ubc9 were higher in all tumor cell lines, compared to the normal cells, and this probably contributes to over

  20. Over-accumulation of nuclear IGF-1 receptor in tumor cells requires elevated expression of the receptor and the SUMO-conjugating enzyme Ubc9

    International Nuclear Information System (INIS)

    Deng, Hua; Lin, Yingbo; Badin, Margherita; Vasilcanu, Daiana; Stroemberg, Thomas; Jernberg-Wiklund, Helena; Sehat, Bita; Larsson, Olle

    2011-01-01

    Research highlights: → SUMOylation mediates nuclear translocation of IGF-1R which activates transcription. → Here we show that nuclear IGF-1R over-accumulates in tumor cells. → This requires overexpression of the receptor that is a common feature in tumor cells. → An increased expression of the SUMO ligase Ubc9 seems to be an involved mechanism too. -- Abstract: The insulin-like growth factor 1 receptor (IGF-1R) plays crucial roles in tumor cell growth and is overexpressed in many cancers. IGF-1R's trans-membrane kinase signaling pathways have been well characterized. Very recently, we showed that SUMOylation mediates nuclear translocation of the IGF-1R, and that nuclear IGF-1R (nIGF-1R) binds to enhancer regions and activates transcription. We identified three lysine residues in the β-subunit of the receptor and that mutation of these blocks nuclear translocation and gene activation. Furthermore, accumulation of nIGF-1R was proven strongly dependent on the specific SUMO-conjugating enzyme Ubc9. Here we show that nIGF-1R originates solely from the cell membrane and that phosphorylation of the core tyrosine residues of the receptor kinase is crucial for nuclear accumulation. We also compared the levels of nIGF-1R, measured as nuclear/membrane ratios, in tumor and normal cells. We found that the breast cancer cell line MCF-7 has 13-fold higher amounts of nIGF-1R than breast epithelial cells (IME) which showed only a small amount of nIGF-1R. In comparison, the total expression of IGF-1R was only 3.7- higher in MCF-7. Comparison of several other tumor and normal cell lines showed similar tumor cell over-accumulation of nIGF-1R, exceeding the total receptor expression substantially. Ectopic overexpression (>10-fold) of the receptor increased nIGF-1R in IME cells but not to that high level as in wild type MCF-7. The levels of Ubc9 were higher in all tumor cell lines, compared to the normal cells, and this probably contributes to over-accumulation of nIGF-1R

  1. Influence of additives on the increase of the heating value of Bayah’s coal with upgrading brown coal (UBC) method

    Energy Technology Data Exchange (ETDEWEB)

    Heriyanto, Heri [Chemical Engineering of University Sultan AgengTirtayasa, Indonesia Email: herfais@yahoo.com (Indonesia); Widya Ernayati, K.; Umam, Chairul; Margareta, Nita

    2015-12-29

    UBC (upgrading brown coal) is a method of improving the quality of coal by using oil as an additive. Through processing in the oil media, not just the calories that increase, but there is also water repellent properties and a decrease in the tendency of spontaneous combustion of coal products produced. The results showed a decrease in the water levels of natural coal bayah reached 69%, increase in calorific value reached 21.2%. Increased caloric value and reduced water content caused by the water molecules on replacing seal the pores of coal by oil and atoms C on the oil that is bound to increase the percentage of coal carbon. As a result of this experiment is, the produced coal has better calorific value, the increasing of this new calorific value up to 23.8% with the additive waste lubricant, and the moisture content reduced up to 69.45%.

  2. Influence of additives on the increase of the heating value of Bayah’s coal with upgrading brown coal (UBC) method

    International Nuclear Information System (INIS)

    Heriyanto, Heri; Widya Ernayati, K.; Umam, Chairul; Margareta, Nita

    2015-01-01

    UBC (upgrading brown coal) is a method of improving the quality of coal by using oil as an additive. Through processing in the oil media, not just the calories that increase, but there is also water repellent properties and a decrease in the tendency of spontaneous combustion of coal products produced. The results showed a decrease in the water levels of natural coal bayah reached 69%, increase in calorific value reached 21.2%. Increased caloric value and reduced water content caused by the water molecules on replacing seal the pores of coal by oil and atoms C on the oil that is bound to increase the percentage of coal carbon. As a result of this experiment is, the produced coal has better calorific value, the increasing of this new calorific value up to 23.8% with the additive waste lubricant, and the moisture content reduced up to 69.45%

  3. Focus on focusing

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The discovery and impact of the principle of strong focusing was celebrated at a history Symposium at Stanford on 25 July in the course of the 1985 US Summer School on Particle Accelerators. Burt Richter, Stanford Linac Director, who introduced all the speakers with well chosen reminders about their various contributions related to the theme of the symposium, remarked that it was an appropriate time to be lauding the great contributions of accelerator physicists following the Nobel Prize award to Simon van der Meer for outstanding achievements in accelerator physics

  4. Focus on focusing

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1985-10-15

    The discovery and impact of the principle of strong focusing was celebrated at a history Symposium at Stanford on 25 July in the course of the 1985 US Summer School on Particle Accelerators. Burt Richter, Stanford Linac Director, who introduced all the speakers with well chosen reminders about their various contributions related to the theme of the symposium, remarked that it was an appropriate time to be lauding the great contributions of accelerator physicists following the Nobel Prize award to Simon van der Meer for outstanding achievements in accelerator physics.

  5. LEADING WITH LEADING INDICATORS

    International Nuclear Information System (INIS)

    PREVETTE, S.S.

    2005-01-01

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites

  6. Focusing ethnography

    DEFF Research Database (Denmark)

    Woermann, Niklas

    2018-01-01

    underpinnings of focusing ethnographic research by comparing different schools of thought and suggesting a practice theory-based approach. It argues that many research projects are focused but do not reflect on the process of focusing, describes how to identify focal settings or practices, and introduces......Building theory with ethnography and filmic research increasingly requires focussing on key practices or settings, instead of painting a broad panorama of a culture. But few authors discuss why and how to focus. This article provides a systematic discussion of the theoretical and methodological...

  7. Focused Ethnography

    Directory of Open Access Journals (Sweden)

    Hubert Knoblauch

    2005-09-01

    Full Text Available In this paper I focus on a distinctive kind of sociological ethnography which is particularly, though not exclusively, adopted in applied research. It has been proposed that this branch of ethno­graphy be referred to as focused ethnography. Focused ethnography shall be delineated within the context of other common conceptions of what may be called conventional ethnography. However, rather than being opposed to it, focused ethno­graphy is rather complementary to conventional ethnography, particularly in fields that are charac­teristic of socially and functionally differentiated contemporary society. The paper outlines the back­ground as well as the major methodological features of focused ethnography, such as short-term field visits, data intensity and time intensity, so as to provide a background for future studies in this area. URN: urn:nbn:de:0114-fqs0503440

  8. Lead poisoning

    Science.gov (United States)

    ... drinking water in homes containing pipes that were connected with lead solder . Although new building codes require ... lead in their bodies when they put lead objects in their mouths, especially if they swallow those ...

  9. Lead Poisoning

    Science.gov (United States)

    Lead is a metal that occurs naturally in the earth's crust. Lead can be found in all parts of our ... from human activities such as mining and manufacturing. Lead used to be in paint; older houses may ...

  10. Without 'Focus'

    Directory of Open Access Journals (Sweden)

    Aldo Sevi

    2010-12-01

    Full Text Available It is widely accepted that a notion of 'focus', more or less as conceived of in Jackendoff (1972, must be incorporated into our theory of grammar, as a means of accounting for certain observed correlations between prosodic facts and semantic/pragmatic facts. In this paper, we put forth the somewhat radical idea that the time has come to give up this customary view, and eliminate 'focus' from our theory of grammar. We argue that such a move is both economical and fruitful.Research over the years has revealed that the correlations between prosody, 'focus', and the alleged semantic/pragmatic effects of focus are much less clear and systematic than we may have initially hoped. First we argue that this state of affairs detracts significantly from the utility of our notion of 'focus', to the point of calling into question the very motivation for including it in the grammar. Then we look at some of the central data, and show how they might be analyzed without recourse to a notion of 'focus'. We concentrate on (i the effect of pitch accent placement on discourse congruence, and (ii the choice of 'associate' for the so-called 'focus sensitive' adverb only. We argue that our focus-free approach to the data improves empirical coverage, and begins to reveal patterns that have previously been obscured by preconceptions about 'focus'.ReferencesBeaver, D. & Clark, B. 2008. Sense and Sensitivity: How Focus Determines Meaning. Blackwell.Beaver, D., Clark, B., Flemming, E., Jaeger, T. F. & Wolters, M. 2007. ‘When semantics meets phonetics: Acoustical studies of second occurrence focus’. Language 83.2: 245–76.http://dx.doi.org/10.1353/lan.2007.0053Beckman, M. & Hirschberg, J. 1994. ‘The ToBI Annotation Conventions’. Ms.,http://www.cs.columbia.edu/~julia/files/conv.pdf.Bolinger, D. 1972. ‘Accent is predictable (if you are a mind-reader’. Language 48.3: 633–44.http://dx.doi.org/10.2307/412039Büring, D. 2006. ‘Focus projection and default

  11. Material focus

    DEFF Research Database (Denmark)

    Sokoler, Tomas; Vallgårda, Anna K. A.

    2009-01-01

    In this paper we build on the notion of computational composites, which hold a material perspective on computational technology. We argue that a focus on the material aspects of the technology could be a fruitful approach to achieve new expressions and to gain a new view on the technology's role...... in design. We study two of the computer's material properties: computed causality and connectability and through developing two computational composites that utilize these properties we begin to explore their potential expressions....

  12. Plasma Focus

    International Nuclear Information System (INIS)

    Bernard, Alain; Jolas, Alain; Garconnet, J.-P.; Mascureau, J. de; Nazet, Christian; Coudeville, Alain; Bekiarian, Andre.

    1977-01-01

    The present report is the edition of the lectures given in a conference on the Focus experiment held at the Centre d'etudes de Limeil, on Oct. 1975. After a survey of the early laboratories one will find the main results obtained in Limeil concerning interferometry, laser scattering, electric and magnetic-measurements, X-ray and neutron emission and also the possible use of explosive current generators instead of capacitor banks at high energy levels. The principal lines of future research are given in the conclusion [fr

  13. Focus: Digital

    DEFF Research Database (Denmark)

    Technology has been an all-important and defining element within the arts throughout the 20th century, and it has fundamentally changed the ways in which we produce and consume music. With this Focus we investigate the latest developments in the digital domain – and their pervasiveness and rapid...... production and reception of contemporary music and sound art. With ‘Digital’ we present four composers' very different answers to how technology impact their work. To Juliana Hodkinson it has become an integral part of her sonic writing. Rudiger Meyer analyses the relationships between art and design and how...

  14. Lead poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Beijers, J A

    1952-01-01

    Three cases of acute lead poisoning of cattle herds via ingestion are reported, and reference is made to several other incidents of lead in both humans and animals. The quantity of lead which was found in the livers of the dead cows varied from 6.5 to 19 mg/kg, while 1160 mg/kg of lead in the liver was found for a young cow which was poisoned experimentally with 5 gms of lead acetate per day; hence, there appears to be great variability in the amounts deposited that can lead to intoxication and death. No evidence was found for a lead seam around the teeth, prophyrinuria, or basophil granules in the erythrocytes during acute or chronic lead poisoning of cattle or horses examined. Reference is made to attempts of finding the boundary line between increased lead absorption and lead intoxication in humans, and an examination of 60 laborers in an offset-printing office containing a great deal of inhalable lead (0.16 to 1.9 mg/cu m air) is reviewed. Physical deviation, basophylic granulation of erythrocytes, increased lead content of the urine, and porphyrinuria only indicate an increased absorption of lead; the use of the term intoxication is justified if, in addition, there are complaints of lack of appetite, constipation, fatigue, abdominal pain, and emaciation.

  15. Lead Toxicity

    Science.gov (United States)

    ... o Do not use glazed ceramics, home remedies, cosmetics, or leaded-crystal glassware unless you know that they are lead safe. o If you live near an industry, mine, or waste site that may have contaminated ...

  16. Relational Leading

    DEFF Research Database (Denmark)

    Larsen, Mette Vinther; Rasmussen, Jørgen Gulddahl

    2015-01-01

    This first chapter presents the exploratory and curious approach to leading as relational processes – an approach that pervades the entire book. We explore leading from a perspective that emphasises the unpredictable challenges and triviality of everyday life, which we consider an interesting......, relevant and realistic way to examine leading. The chapter brings up a number of concepts and contexts as formulated by researchers within the field, and in this way seeks to construct a first understanding of relational leading....

  17. Lead Test

    Science.gov (United States)

    ... to do renovation and repair projects using lead-safe work practices to avoid creating more lead dust or ... in a dangerous area? Yes. If you are working in a potentially harmful environment with exposure to lead dust or fumes: Wash ...

  18. Focusing horn

    CERN Multimedia

    1980-01-01

    This was the first magnetic horn developed by Simon Van der Meer to collect antiprotons in the AD complex. It was used for the AA (antiproton accumulator). Making an antiproton beam took a lot of time and effort. Firstly, protons were accelerated to an energy of 26 GeV/c (protons at 26GeV/c, antiprotons at 3.6GeV/c) in the PS and ejected onto a metal target. From the spray of emerging particles, a magnetic horn picked out 3.6 GeV antiprotons for injection into the AA through a wide-aperture focusing quadrupole magnet. For a million protons hitting the target, just one antiproton was captured, 'cooled' and accumulated. It took 3 days to make a beam of 3 x 10^11 -, three hundred thousand million - antiprotons. The development of this technology was a key step to the functioning of CERN's Super Proton Synchrotron as a proton - antiproton collider.

  19. Leading Democratically

    Science.gov (United States)

    Brookfield, Stephen

    2010-01-01

    Democracy is the most venerated of American ideas, the one for which wars are fought and people die. So most people would probably agree that leaders should be able to lead well in a democratic society. Yet, genuinely democratic leadership is a relative rarity. Leading democratically means viewing leadership as a function or process, rather than…

  20. Leading change.

    Science.gov (United States)

    2017-02-27

    In response to feedback from nursing, midwifery and other care staff who wanted to understand better how the Leading Change, Adding Value framework applies to them, NHS England has updated its webpage to include practice examples.

  1. Decontamination & decommissioning focus area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In February 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.

  2. ALICE: Simulated lead-lead collision

    CERN Multimedia

    2003-01-01

    This track is an example of simulated data modelled for the ALICE detector on the Large Hadron Collider (LHC) at CERN, which will begin taking data in 2008. ALICE will focus on the study of collisions between nuclei of lead, a heavy element that produces many different particles when collided. It is hoped that these collisions will produce a new state of matter known as the quark-gluon plasma, which existed billionths of a second after the Big Bang.

  3. Ecotoxicology: Lead

    Science.gov (United States)

    Scheuhammer, A.M.; Beyer, W.N.; Schmitt, C.J.; Jorgensen, Sven Erik; Fath, Brian D.

    2008-01-01

    Lead (Pb) is a naturally occurring metallic element; trace concentrations are found in all environmental media and in all living things. However, certain human activities, especially base metal mining and smelting; combustion of leaded gasoline; the use of Pb in hunting, target shooting, and recreational angling; the use of Pb-based paints; and the uncontrolled disposal of Pb-containing products such as old vehicle batteries and electronic devices have resulted in increased environmental levels of Pb, and have created risks for Pb exposure and toxicity in invertebrates, fish, and wildlife in some ecosystems.

  4. Leading men

    DEFF Research Database (Denmark)

    Bekker-Nielsen, Tønnes

    2016-01-01

    Through a systematic comparison of c. 50 careers leading to the koinarchate or high priesthood of Asia, Bithynia, Galatia, Lycia, Macedonia and coastal Pontus, as described in funeral or honorary inscriptions of individual koinarchs, it is possible to identify common denominators but also disting...

  5. Who Leads China's Leading Universities?

    Science.gov (United States)

    Huang, Futao

    2017-01-01

    This study attempts to identify the major characteristics of two different groups of institutional leaders in China's leading universities. The study begins with a review of relevant literature and theory. Then, there is a brief introduction to the selection of party secretaries, deputy secretaries, presidents and vice presidents in leading…

  6. Lead user projects in practice

    DEFF Research Database (Denmark)

    Brem, Alexander; Gutstein, Adele

    2018-01-01

    Earlier research on the lead user method is focused on individual case studies and how the method was applied in a specific context. In this paper, we take a broader approach, analyzing a sample of 24 lead user projects, which included working with 188 lead users. These projects were analyzed...

  7. Focus on the success of others leads to selfish behavior

    NARCIS (Netherlands)

    van den Berg, Pieter; Molleman, Lucas; Weissing, Franz J.

    2015-01-01

    It has often been argued that the spectacular cognitive capacities of humans are the result of selection for the ability to gather, process, and use information about other people. Recent studies show that humans strongly and consistently differ in what type of social information they are interested

  8. Leading change: 3--implementation.

    Science.gov (United States)

    Kerridge, Joanna

    The potential for all staff to contribute to service improvement, irrespective of discipline, role or function, is outlined in the 2011 NHS leadership framework. This advocates developing the skills of the entire workforce to create a climate of continuous service improvement. As nurses are often required to take the lead in managing change in clinical practice, this final article in a three-part series focuses on implementing ande potentia reviewing change.

  9. Leading healthcare in complexity.

    Science.gov (United States)

    Cohn, Jeffrey

    2014-12-01

    Healthcare institutions and providers are in complexity. Networks of interconnections from relationships and technology create conditions in which interdependencies and non-linear dynamics lead to surprising, unpredictable outcomes. Previous effective approaches to leadership, focusing on top-down bureaucratic methods, are no longer effective. Leading in complexity requires leaders to accept the complexity, create an adaptive space in which innovation and creativity can flourish and then integrate the successful practices that emerge into the formal organizational structure. Several methods for doing adaptive space work will be discussed. Readers will be able to contrast traditional leadership approaches with leading in complexity. They will learn new behaviours that are required of complexity leaders, along with challenges they will face, often from other leaders within the organization.

  10. 2009 Community College Futures Assembly Focus: Leading Change--Leading in an Uncertain Environment

    Science.gov (United States)

    Campbell, Dale F.; Morris, Phillip A.

    2009-01-01

    The Community College Futures Assembly has served as a national, independent policy thinktank since 1995. Its purpose is to articulate the critical issues facing American community colleges and recognize innovative programs. Convening annually in January in Orlando, Florida, the Assembly offers a learning environment where tough questions are…

  11. Leading change: 2--planning.

    Science.gov (United States)

    Kerridge, Joanna

    National initiatives have outlined the importance of involving frontline staff in service improvement, and the ability to influence and manage change has been identified as an essential skill for delivering new models of care. Nurses often have to take the lead in managing change in clinical practice. The second in a three-part series is designed to help nurses at all levels develop the knowledge and skills to function as change agents within their organisations. This article focuses on planning the change and dealing with resistance.

  12. Focusing on customer service.

    Science.gov (United States)

    1996-01-01

    This booklet is devoted to a consideration of how good customer service in family planning programs can generate demand for products and services, bring customers back, and reduce costs. Customer service is defined as increasing client satisfaction through continuous concern for client preferences, staff accountability to clients, and respect for the rights of clients. Issues discussed include the introduction of a customer service approach and gaining staff commitment. The experience of PROSALUD in Bolivia in recruiting appropriate staff, supervising staff, soliciting client feedback, and marketing services is offered as an example of a successful customer service approach. The key customer service functions are described as 1) establishing a welcoming atmosphere, 2) streamlining client flow, 3) personalizing client services, and 4) organizing and providing clear information to clients. The role of the manager in developing procedures is explored, and the COPE (Client-Oriented Provider-Efficient) process is presented as a good way to begin to make improvements. Techniques in staff training in customer service include brainstorming, role playing, using case studies (examples of which are provided), and engaging in practice sessions. Training also leads to the development of effective customer service attitudes, and the differences between these and organizational/staff-focused attitudes are illustrated in a chart. The use of communication skills (asking open-ended questions, helping clients express their concerns, engaging in active listening, and handling difficult situations) is considered. Good recovery skills are important when things go wrong. Gathering and using client feedback is the next topic considered. This involves identifying, recording, and discussing customer service issues as well as taking action on these issues and evaluating the results. The booklet ends by providing a sample of customer service indicators, considering the maintenance of a

  13. Lead user projects in practice

    DEFF Research Database (Denmark)

    Brem, Alexander; Gutstein, Adele

    2018-01-01

    Earlier research on the lead user method is focused on individual case studies and how the method was applied in a specific context. In this paper, we take a broader approach, analyzing a sample of 24 lead user projects, which included working with 188 lead users. These projects were analyzed....... Moreover, crowdsourcing contests and netnography proved to be of significant value for the need, trend, and lead user identification phases. This paper concludes by discussing theoretical and practical implications, the limitations of this study, and recommendations for future studies....

  14. Plasma focus breeder

    International Nuclear Information System (INIS)

    Ikuta, Kazunari.

    1981-09-01

    Instead of using linear accelerators, it is possible to breed fissile fuels with the help of high current plasma focus device. A mechanism of accelerating proton beam in plasma focus device to high energy would be a change of inductance in plasma column because of rapid growth of plasma instability. A possible scheme of plasma focus breeder is also proposed. (author)

  15. Lead levels - blood

    Science.gov (United States)

    Blood lead levels ... is used to screen people at risk for lead poisoning. This may include industrial workers and children ... also used to measure how well treatment for lead poisoning is working. Lead is common in the ...

  16. Lead Poisoning Prevention Tips

    Science.gov (United States)

    ... or removed safely. How are children exposed to lead? Lead-based paint and lead contaminated dust are ... What can be done to prevent exposure to lead? It is important to determine the construction year ...

  17. Implementation Guide: Leading School Change

    Science.gov (United States)

    Whitaker, Todd

    2010-01-01

    This two-part "Implementation Guide" will help to deepen your understanding and sharpen your ability to implement each of the strategies discussed in "Leading School Change: Nine Strategies to Bring Everybody on Board" (ED509821). Part One offers discussion questions and activities which focus on each of the nine strategies. They can be completed…

  18. Stability of expanded plasma focus

    International Nuclear Information System (INIS)

    Soliman, H.M.

    1994-01-01

    In this study, the stabilization of the expanded plasma focus formed by 4.5 kJ plasma focus device of Mather type by magnetic field is presented. The experimental results of the induced axial magnetic field and electric probe measurements of the expanded plasma focus show that, the plasma consists of three plasmoids, electron temperature measurements off the plasmoids at a point close to the muzzle are 26 eV, 30 eV and 27 eV respectively and the electron densities are 6.6 x 10 14 , 6.1 x 10 14 / cm 3 respectively. The presence of external axial magnetic field (B 2 = 1.6 kg) at the mid distance between the breech and the muzzle has a less effect on the stability of expanded focus and it causes a restriction for the plasma motion. the electron temperature of the three plasmoids are found to increase in that case by 23%, 18.5% respectively. When this axial magnetic field is applied at the muzzle end, it leads to a more stable expanded plasma focus which consists mainly of one plasmoid with electron temperature of 39 eV and density of 3.4 x 10 14 / cm 3 . 5 figs

  19. FOCUS ON GRAPHENE

    International Nuclear Information System (INIS)

    Peres, N M R; Ribeiro, Ricardo M

    2009-01-01

    Graphene physics is currently one of the most active research areas in condensed matter physics. Countless theoretical and experimental studies have already been performed, targeting electronic, magnetic, thermal, optical, structural and vibrational properties. Also, studies that modify pristine graphene, aiming at finding new physics and possible new applications, have been considered. These include patterning nanoribbons and quantum dots, exposing graphene's surface to different chemical species, studying multilayer systems, and inducing strain and curvature (modifying in this way graphene's electronic properties). This focus issue includes many of the latest developments on graphene research. Focus on Graphene Contents The effect of sublattice symmetry breaking on the electronic properties of doped graphene A Qaiumzadeh and R Asgari Interfaces within graphene nanoribbons J Wurm, M Wimmer, I Adagideli, K Richter and H U Baranger Weak localization and transport gap in graphene antidot lattices J Eroms and D Weiss Electronic properties of graphene antidot lattices J A Fuerst, J G Pedersen, C Flindt, N A Mortensen, M Brandbyge, T G Pedersen and A-P Jauho Splitting of critical energies in the n=0 Landau level of graphene Ana L C Pereira Double-gated graphene-based devices S Russo, M F Craciun, M Yamamoto, S Tarucha and A F Morpurgo Pinning and switching of magnetic moments in bilayer graphene Eduardo V Castro, M P Lopez-Sancho and M A H Vozmediano Electronic transport properties of graphene nanoribbons Katsunori Wakabayashi, Yositake Takane, Masayuki Yamamoto and Manfred Sigrist Many-body effects on out-of-plane phonons in graphene J Gonzalez and E Perfetto Graphene zigzag ribbons, square lattice models and quantum spin chains Mahdi Zarea and Nancy Sandler On the universal ac optical background in graphene V P Gusynin, S G Sharapov and J P Carbotte Heat conduction in graphene: experimental study and theoretical interpretation S Ghosh, D L Nika, E P Pokatilov and A A

  20. Focused ultrasound in ophthalmology

    Directory of Open Access Journals (Sweden)

    Silverman RH

    2016-09-01

    Full Text Available Ronald H Silverman1,2 1Department of Ophthalmology, Columbia University Medical Center, 2F.L. Lizzi Center for Biomedical Engineering, Riverside Research, New York, NY, USA Abstract: The use of focused ultrasound to obtain diagnostically significant information about the eye goes back to the 1950s. This review describes the historical and technological development of ophthalmic ultrasound and its clinical application and impact. Ultrasound, like light, can be focused, which is crucial for formation of high-resolution, diagnostically useful images. Focused, single-element, mechanically scanned transducers are most common in ophthalmology. Specially designed transducers have been used to generate focused, high-intensity ultrasound that through thermal effects has been used to treat glaucoma (via cilio-destruction, tumors, and other pathologies. Linear and annular transducer arrays offer synthetic focusing in which precise timing of the excitation of independently addressable array elements allows formation of a converging wavefront to create a focus at one or more programmable depths. Most recently, linear array-based plane-wave ultrasound, in which the array emits an unfocused wavefront and focusing is performed solely on received data, has been demonstrated for imaging ocular anatomy and blood flow. While the history of ophthalmic ultrasound extends back over half-a-century, new and powerful technologic advances continue to be made, offering the prospect of novel diagnostic capabilities. Keywords: ophthalmic ultrasound, ultrasound biomicroscopy (UBM, high-intensity focused ultrasound (HIFU, ultrafast imaging, Doppler imaging 

  1. BrightFocus Foundation

    Science.gov (United States)

    ... About BrightFocus Foundation Featured Content BrightFocus: Investing in Science to Save Mind and Sight We're here to help. Explore ... recognition is very important. Monday, November 6, 2017 New Diagnosis? Managing a mind and sight disease is a journey. And you’ ...

  2. Focus on integrated quantum optics

    International Nuclear Information System (INIS)

    O'Brien, Jeremy; Patton, Brian; Sasaki, Masahide; Vučković, Jelena

    2013-01-01

    A key goal of research into quantum information processing is the development of technologies that are scaleable in complexity while allowing the mass manufacture of devices that promise transformative effects on information science. The demonstration that integrated photonics circuits could be made to perform operations that exploit the quantum nature of the photon has turned them into leading candidates for practical quantum information processing technologies. To fully achieve their promise, however, requires research from diverse fields. This focus issue provides a snapshot of some of the areas in which key advances have been made. We are grateful for the contributions from leading teams based around the globe and hope that the degree of progress being made in a challenging and exciting field is apparent from the papers published here. (editorial)

  3. Lead (Pb) Air Pollution

    Science.gov (United States)

    ... Regional Offices Labs and Research Centers Lead (Pb) Air Pollution Contact Us Share As a result of EPA's ... and protect aquatic and terrestrial ecosystems. Lead (Pb) Air Pollution Basic Information How does lead get in the ...

  4. Instabilities in the plasma focus

    International Nuclear Information System (INIS)

    Kaeppeler, H.J.

    1975-03-01

    The plasma focus was studied by many research teams in view of a possible approach to controlled thermonuclear fusion. Though it is questionable whether the plasma focus will ever lead to a fusion reactor, it nevertheless constitutes a strong source of neutron, X- and gamma radiation for simulating fusion reactor conditions. Furthermore, the plasma focus yields very high temperatures (10 7 K) and densities (> 10 19 cm -3 ) and thus provides interesting conditions for the study of high density plasmas. This review paper starts with a description of the compression stage of the focussing plasma, using a snow-plough model. It is shown that sophisticated MHD calculations substantiate the snowplough theory, but are not suited to describe the phenomena in the final compressed stage. For this purpose, a particle-in-cell calculation is employed, yielding a beam-beam collision model for the neutron production. Experimental evidence indicates that neutron production is associated with the appearence of m = O instabilities and is the direct result of collisions between anomalously accelerated ions. One of the mechanisms of ion acceleration are strong local electric fields. Another possible mechanism can bee seen in beam-plasma instabilities caused by runaway electrons. The analytical derivation of the dispersion relation for plasma focus conditions including runaway effect is discussed (orig.) [de

  5. Final focus nomenclature

    International Nuclear Information System (INIS)

    Erickson, R.

    1986-01-01

    The formal names and common names for all devices in the final focus system of the SLC are listed. The formal names consist of a device type designator, microprocessor designator, and a four-digit unit number

  6. Final focus test beam

    International Nuclear Information System (INIS)

    1991-03-01

    This report discusses the following: the Final Focus Test Beam Project; optical design; magnets; instrumentation; magnetic measurement and BPM calibration; mechanical alignment and stabilization; vacuum system; power supplies; control system; radiation shielding and personnel protection; infrastructure; and administration

  7. Facility Focus: Food Service.

    Science.gov (United States)

    College Planning & Management, 2002

    2002-01-01

    Describes the Hawthorn Court Community Center at Iowa State University, Ames, and the HUB-Robeson Center at Pennsylvania State University. Focuses on the food service offered in these new student-life buildings. Includes photographs. (EV)

  8. Focus group discussions

    CERN Document Server

    Hennink, Monique M

    2014-01-01

    The Understanding Research series focuses on the process of writing up social research. The series is broken down into three categories: Understanding Statistics, Understanding Measurement, and Understanding Qualitative Research. The books provide researchers with guides to understanding, writing, and evaluating social research. Each volume demonstrates how research should be represented, including how to write up the methodology as well as the research findings. Each volume also reviews how to appropriately evaluate published research. Focus Group Discussions addresses the challenges associated with conducting and writing focus group research. It provides detailed guidance on the practical and theoretical considerations in conducting focus group discussions including: designing the discussion guide, recruiting participants, training a field team, moderating techniques and ethical considerations. Monique Hennink describes how a methodology section is read and evaluated by others, such as journal reviewers or ...

  9. Final focus nomenclature

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, R.

    1986-08-08

    The formal names and common names for all devices in the final focus system of the SLC are listed. The formal names consist of a device type designator, microprocessor designator, and a four-digit unit number. (LEW)

  10. High harmonics focusing undulator

    Energy Technology Data Exchange (ETDEWEB)

    Varfolomeev, A.A.; Hairetdinov, A.H.; Smirnov, A.V.; Khlebnikov, A.S. [Kurchatov Institute, Moscow (Russian Federation)

    1995-12-31

    It was shown in our previous work that there exist a possibility to enhance significantly the {open_quote}natural{close_quote} focusing properties of the hybrid undulator. Here we analyze the actual undulator configurations which could provide such field structure. Numerical simulations using 2D code PANDIRA were carried out and the enhanced focusing properties of the undulator were demonstrated. The obtained results provide the solution for the beam transport in a very long (short wavelength) undulator schemes.

  11. The Individually Focused Interview

    DEFF Research Database (Denmark)

    Clausen, Aksel Skovgaard

    2012-01-01

    relatively “strong” interviewees (interview persons: IPs) with diverse backgrounds; (2) thorough planning of the interview with well-focused themes; and (3) a thorough and repeated introduction to the interview. The omission of audio transcriptions is an obvious solution to the researcher who wants a breadth...... of range of statements stemming from the use of many more interviewees than is often possible. The Individually Focused Interview (TIFI) also provides more time for involvement in the field and further analysis....

  12. Plutonium focus area

    International Nuclear Information System (INIS)

    1996-08-01

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this new approach, EM developed a management structure and principles that led to the creation of specific Focus Areas. These organizations were designed to focus the scientific and technical talent throughout DOE and the national scientific community on the major environmental restoration and waste management problems facing DOE. The Focus Area approach provides the framework for intersite cooperation and leveraging of resources on common problems. After the original establishment of five major Focus Areas within the Office of Technology Development (EM-50, now called the Office of Science and Technology), the Nuclear Materials Stabilization Task Group (EM-66) followed the structure already in place in EM-50 and chartered the Plutonium Focus Area (PFA). The following information outlines the scope and mission of the EM, EM-60, and EM-66 organizations as related to the PFA organizational structure

  13. Plasma focus matching conditions

    International Nuclear Information System (INIS)

    Soliman, H.M.; Masoud, M.M.; Elkhalafawy, T.A.

    1988-01-01

    A snow-plough and slug models have been used to obtain the optimum matching conditions of the plasma in the focus. The dimensions of the plasma focus device are, inner electrode radius = 2 cm, outer electrode radius = 5.5 cm, and its length = 8 cm. It was found that the maximum magnetic energy of 12.26 kJ has to be delivered to plasma focus whose density is 10 19 /cm 3 at focusing time of 2.55 μs and with total external inductance of 24.2 n H. The same method is used to evaluate the optimum matching conditions for the previous coaxial discharge system which had inner electrode radius = 1.6 cm, outer electrode radius = 3.3 cm and its length = 31.5 cm. These conditions are charging voltage = 12 kV, capacity of the condenser bank = 430 μf, plasma focus density = 10 19 /cm 3 focusing time = 8 μs and total external inductance = 60.32 n H.3 fig., 2 tab

  14. Cryogenic current leads

    Energy Technology Data Exchange (ETDEWEB)

    Zizek, F.

    1982-01-01

    Theoretical, technical and design questions are examined of cryogenic current leads for SP of magnetic systems. Simplified mathematical models are presented for the current leads. To illustrate modeling, the calculation is made of the real current leads for 500 A and three variants of current leads for 1500 A for the enterprise ''Shkoda.''

  15. Lead - nutritional considerations

    Science.gov (United States)

    ... billion people had toxic (poisonous) blood lead levels. Food Sources Lead can be found in canned goods if there is lead solder in the ... to bottled water for drinking and cooking. Avoid canned goods from foreign ... cans goes into effect. If imported wine containers have a lead foil ...

  16. The focus factor

    DEFF Research Database (Denmark)

    Nicolaisen, Jeppe; Frandsen, Tove Faber

    2015-01-01

    Introduction. We present a new bibliometric indicator to measure journal specialisation over time, named the focus factor. This new indicator is based on bibliographic coupling and counts the percentage of re-citations given in subsequent years. Method. The applicability of the new indicator....... To validate re-citations as caused by specialisation, other possible causes were measured and correlated (obsolescence, journal self-citations and number of references). Results. The results indicate that the focus factor is capable of distinguishing between general and specialised journals and thus...... effectively measures the intended phenomenon (i.e., journal specialisation). Only weak correlations were found between journal re-citations and obsolescence, journal self-citations, and number of references. Conclusions. The focus factor successfully measures journal specialisation over time. Measures based...

  17. Collective focusing ion accelerator

    International Nuclear Information System (INIS)

    Goldin, F.J.

    1986-01-01

    The principal subject of this dissertation is the trapping confinement of pure electron plasmas in bumpy toroidal magnetic fields, with particular attention given to the trapping procedure and the behavior of the plasma during the final equilibrium. The most important aspects of the equilibrium studied were the qualitative nature of the plasma configuration and motion and its density, distribution and stability. The motivation for this study was that an unneutralized cloud of electrons contained in a toroidal system, sufficiently dense and stable, may serve to electrostatically focus ions (against centrifugal and self space charge forces) in a cyclic ion accelerator. Such an accelerator, known as a Collective Focusing Ion Accelerator (CFIA) could be far smaller than conventional designs (which use external magnetic fields directly to focus the ions) due to the smaller gyro-radium of an electron in a magnetic field of given strength. The electron cloud generally drifted poloidally at a finite radius from the toroidal minor axis. As this would preclude focusing ions with such clouds, damping this motion was investigated. Finite resistance in the normally perfectly conductive vessel wall did this. In further preparation for a working CFIA, additional experiments studied the effect of ions on the stability of the electron cloud

  18. Plasma focus project

    International Nuclear Information System (INIS)

    Sahlin, H.L.

    1975-12-01

    The primary objective of this project is to provide a relatively simple pulsed power source for high density pulsed fusion studies with a variety of DT and other fusion microexplosion targets. The plasma focus operated on DT at 1 MJ should produce greater than or equal to 10 15 DT neutrons per pulse corresponding to 2800 J of nuclear energy release and for low pressure operation and appropriately configured high Z anode center should yield an x-ray burst of about 1000 J with a substantial fraction of this x-ray energy concentrated in the 5-100 kV range. Because of its x-ray and neutron production potential, the operation of the focus as an x-ray source is also under study and an initial design study for a repetitively pulsed 1 MJ plasma focus as a pulsed neutron materials testing source has been completed. The plasma focus seems particularly appropriate for application as a materials testing source for pulsed fusion reactors, for example, based on laser driven fusion microexplosions. The construction status of the device is described

  19. Lead inclusions in aluminium

    International Nuclear Information System (INIS)

    Johnson, E.; Johansen, A.; Sarholt-Kristensen, L.; Andersen, H.H.; Grabaek, L.; Bohr, J.

    1990-01-01

    Ion implantation at room temperature of lead into aluminum leads to spontaneous phase separation and formation of lead precipitates growing topotactically with the matrix. Unlike the highly pressurized (∼ 1-5 GPa) solid inclusions formed after noble gas implantations, the pressure in the lead precipitates is found to be less than 0.12 GPa. Recently the authors have observed the result that the lead inclusions in aluminum exhibit both superheating and supercooling. In this paper they review and elaborate on these results. Small implantation-induced lead precipitates embedded in an aluminum matrix were studied by x-ray diffraction

  20. Verification of radiation exposure using lead shields

    International Nuclear Information System (INIS)

    Hayashida, Keiichi; Yamamoto, Kenyu; Azuma, Masami

    2016-01-01

    A long time use of radiation during IVR (intervention radiology) treatment leads up to an increased exposure on IVR operator. In order to prepare good environment for the operator to work without worry about exposure, the authors examined exposure reduction with the shields attached to the angiography instrument, i. e. lead curtain and lead glass. In this study, the lumber spine phantom was radiated using the instrument and the radiation leaked outside with and without shields was measured by the ionization chamber type survey meter. The meter was placed at the position which was considered to be that for IVR operator, and changed vertically 20-100 cm above X-ray focus by 10 cm interval. The radiation at the position of 80 cm above X-ray focus was maximum without shield and was hardly reduced with lead curtain. However, it was reduced with lead curtain plus lead glass. Similar reduction effects were observed at the position of 90-100 cm above X-ray focus. On the other hand, the radiation at the position of 70 cm above X-ray focus was not reduced with either shield, because that position corresponded to the gap between lead curtain and lead glass. The radiation at the position of 20-60 cm above X-ray focus was reduced with lead curtain, even if without lead glass. These results show that lead curtain and lead glass attached to the instrument can reduce the radiation exposure on IVR operator. Using these shields is considered to be one of good means for IVR operator to work safely. (author)

  1. VOLUMETRIC LEAD ASSAY

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Dua, S.K.; Roelant, David; Kumar, Sachin

    2001-01-01

    This report describes a system for handling and radioassay of lead, consisting of a robot, a conveyor, and a gamma spectrometer. The report also presents a cost-benefit analysis of options: radioassay and recycling lead vs. disposal as waste

  2. NA49: lead-lead collision

    CERN Multimedia

    1996-01-01

    This is an image of an actual lead ion collision taken from tracking detectors on the NA49 experiment, part of the heavy ion project at CERN. These collisions produce a very complicated array of hadrons as the heavy ions break up. It is hoped that one of these collisions will eventually create a new state of matter known as quark-gluon plasma.

  3. Uranium-lead systematics

    International Nuclear Information System (INIS)

    Wickman, F.E.

    1983-01-01

    The method of Levchenkov and Shukolyukov for calculating age and time disturbance of minerals without correction for original lead is generalized to include the cases when (1) original lead and radiogenic lead leach differently, and (2) the crystals studied consist of a core and a mantle. It is also shown that a straight line obtained from the solution of the equations is the locus of the isotopic composition of original lead. (Auth.)

  4. To Lead or Not to Lead?

    Science.gov (United States)

    Bertenshaw, Maria; Bradford, Katie; Burns, Natalie; Flux, Rachel; Horan, Danielle

    2013-01-01

    The authors of this article, as student teachers, explored becoming facilitators in lessons focusing on micro-organisms. They elicited ideas from their students and found that even the brightest children held some misconceptions about micro-organisms. The students had some knowledge, but they had not learned how to apply this to investigations…

  5. Focusing of electromagnetic waves

    International Nuclear Information System (INIS)

    Dhayalan, V.

    1996-01-01

    The focusing of electromagnetic waves inside a slab has been examined together with two special cases in which the slab is reduced to a single interface or a single medium. To that end the exact solutions for the fields inside a layered medium have been used, given in terms of the outside current source in order to obtain the solutions for the focused electric field inside a slab. Both exact and asymptotic solutions of the problem have been considered, and the validity of the latter has been discussed. The author has developed a numerical algorithm for evaluation of the diffraction integral with special emphasis on reducing the computing time. The numerical techniques in the paper can be readily applied to evaluate similar diffraction integrals occurring e.g. in microstrip antennas. 46 refs

  6. Magnetic Focusing Horn

    CERN Multimedia

    1974-01-01

    This magnetic focusing horn was used for the AA (antiproton accumulator). Its development was an important step towards using CERN's Super Proton Synchrotron as a proton - antiproton collider. This eventually led to the discovery of the W and Z particles in 1983. Making an antiproton beam took a lot of time and effort. Firstly, protons were accelerated to an energy of 26 GeV in the PS and ejected onto a metal target. From the spray of emerging particles, a magnetic horn picked out 3.6 GeV antiprotons for injection into the AA through a wide-aperture focusing quadrupole magnet. For a million protons hitting the target, just one antiproton was captured, 'cooled' and accumulated. It took 3 days to make a beam of 3 x 10^11 -, three hundred thousand million - antiprotons.

  7. An adiabatic focuser

    International Nuclear Information System (INIS)

    Chen, P.; Oide, K.; Sessler, A.M.; Yu, S.S.

    1989-08-01

    Theoretical analysis is made of an intense relativistic electron beam, such as would be available from a linear collider, moving through a plasma of increasing density, but density always less than that of the beam (underdense). In this situation, the plasma electrons are expelled from the beam channel and the electrons are subject to an ever-increasing focusing force provided by the channel ions. Analysis is made on the beam radiation energy loss in the classical, the transition, and the quantum regimes. It is shown that the focuser is insensitive to the beam energy spread behaviors in the nonclassical regimes, the radiation limit on lenses (the Oide limit) can be exceeded. The sensitivity of the system to the topic mismatch and the nonlinearity is also analyzed. Examples are given with SLC-type and TLC-type parameters. 9 refs., 1 tab

  8. Line broadening by focusing

    International Nuclear Information System (INIS)

    Brito, A.L. de; Jabs, A.

    1983-01-01

    It is pointed out that the spectral width of a quasi-monochromatic light beam broadens when the beam is focused. A quantitative formula for this broadening is derived from classical wave theory. The effect is shown to explain some experiments on laser beams done by E. Panarella which that author has explained under the ad-hoc hypothesis that the frequency of the photons changes along with the intensity of the light beam. The line broadening by focusing might also contribute to gas ionization by incident light when the ionization potential is well above the mean photon energy. Some remarks are made on some direct applications of the Heisenberg relations in comparison with our treatment. (Author) [pt

  9. Focus on Delivery

    DEFF Research Database (Denmark)

    Hasman, Kirsten; Barfoed, Anne

    Background: Compared to other Nordic countries, Denmark has a high incidence of anal sphincter injury. Recent studies indicate that a strict focus on prevention of severe perineal trauma has decreased the incidence (1). This has resulted in changed clinical procedures in several Danish labour wards...... (2). It is, however, not clarified which of the multifaceted aspects of preventing perineal injury that might explain the decrease (3). Aims: We hypothesized that the use of structured reflection on a clinical practice by midwives and midwifery students would increase both parts’ knowledge on how...... attended the delivery, facilitated the midwife’s and the student’s structured reflection. Further, the project midwife held daily simulation workshops with midwives and students. Two focus group interviews with students and midwives were conducted and analyzed using content analysis. Results and conclusion...

  10. Atrioventricular Pacemaker Lead Reversal

    Directory of Open Access Journals (Sweden)

    Mehmet K Aktas, MD

    2007-01-01

    Full Text Available During cardiac surgery temporary epicardial atrial and ventricular leads are placed in case cardiac pacing is required postoperatively. We present the first reported series of patients with reversal of atrioventricular electrodes in the temporary pacemaker without any consequent deleterious hemodynamic effect. We review the electrocardiographic findings and discuss the findings that lead to the discovery of atrioventricular lead reversal.

  11. Lead Poisoning (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Lead Poisoning KidsHealth / For Parents / Lead Poisoning What's in ... Print en español La intoxicación por plomo About Lead Poisoning If you have young kids, it's important ...

  12. Focus Group Guide

    Science.gov (United States)

    2017-07-01

    home for the arrival of school- aged children. TIP: Do not conduct focus groups in a command conference room in the command group area. Doing so...organizational effectiveness and equal opportunity/equal employment opportunity/fair treatment and sexual assault and response factors (which are listed on the... Sexual Harassment (C) Sex Harassment Retaliation (D) Discrimination - Sex (E) Discrimination - Race (F) Discrimination - Disability (G

  13. Dialogicality in Focus

    DEFF Research Database (Denmark)

    The phenomenon which dialogism addresses is human interaction. It enables us to conceptualise human interaction as intersubjective, symbolic, cultural, transformative and conflictual, in short, as complex. The complexity of human interaction is evident in all domains of human life, for example, i......, because rather than applying dialogism to this or that domain, the present volume focuses on dialogicality itself to interrogate the concepts and methods which are taken for granted in the burgeoning literature. (Imprint: Nova Press)...

  14. Dense Plasma Focus Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hui [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Li, Shengtai [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jungman, Gerard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hayes-Sterbenz, Anna Catherine [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-31

    The mechanisms for pinch formation in Dense Plasma Focus (DPF) devices, with the generation of high-energy ions beams and subsequent neutron production over a relatively short distance, are not fully understood. Here we report on high-fidelity 2D and 3D numerical magnetohydrodynamic (MHD) simulations using the LA-COMPASS code to study the pinch formation dynamics and its associated instabilities and neutron production.

  15. The refining of secondary lead for use in advanced lead-acid batteries

    International Nuclear Information System (INIS)

    Ellis, Timothy W.; Mirza, Abbas H.

    2010-01-01

    Secondary lead, i.e. material produced by the recycling of lead-acid batteries has become the primary source of lead in much of the world. This has been important to the secondary lead industry as other uses have dwindled, e.g. lead based pigments, chemicals, fuel additives, solders and CRT glasses. Presently, battery manufacturing accounts for greater than 80% of lead consumption while recycled lead accounts for approximately the same market share of lead supply. These two facts strongly demonstrate the battery manufacturing and recycled lead are intimately coupled in everyday life. In this paper we will explore how recycled lead has become the material of choice for battery construction through the development of a recovery and refining process that exceeds the industries requirements. Particular focus will be on addressing the results presented by Prengaman on the effects of contaminant or tramp elements on gassing in lead-acid batteries. (author)

  16. Subsurface contaminants focus area

    International Nuclear Information System (INIS)

    1996-08-01

    The US Department of Enregy (DOE) Subsurface Contaminants Focus Area is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater that exist throughout the DOE complex, including radionuclides, heavy metals; and dense non-aqueous phase liquids (DNAPLs). More than 5,700 known DOE groundwater plumes have contaminated over 600 billion gallons of water and 200 million cubic meters of soil. Migration of these plumes threatens local and regional water sources, and in some cases has already adversely impacted off-site rsources. In addition, the Subsurface Contaminants Focus Area is responsible for supplying technologies for the remediation of numerous landfills at DOE facilities. These landfills are estimated to contain over 3 million cubic meters of radioactive and hazardous buried Technology developed within this specialty area will provide efective methods to contain contaminant plumes and new or alternative technologies for development of in situ technologies to minimize waste disposal costs and potential worker exposure by treating plumes in place. While addressing contaminant plumes emanating from DOE landfills, the Subsurface Contaminants Focus Area is also working to develop new or alternative technologies for the in situ stabilization, and nonintrusive characterization of these disposal sites

  17. Particle Accelerator Focus Automation

    Science.gov (United States)

    Lopes, José; Rocha, Jorge; Redondo, Luís; Cruz, João

    2017-08-01

    The Laboratório de Aceleradores e Tecnologias de Radiação (LATR) at the Campus Tecnológico e Nuclear, of Instituto Superior Técnico (IST) has a horizontal electrostatic particle accelerator based on the Van de Graaff machine which is used for research in the area of material characterization. This machine produces alfa (He+) and proton (H+) beams of some μA currents up to 2 MeV/q energies. Beam focusing is obtained using a cylindrical lens of the Einzel type, assembled near the high voltage terminal. This paper describes the developed system that automatically focuses the ion beam, using a personal computer running the LabVIEW software, a multifunction input/output board and signal conditioning circuits. The focusing procedure consists of a scanning method to find the lens bias voltage which maximizes the beam current measured on a beam stopper target, which is used as feedback for the scanning cycle. This system, as part of a wider start up and shut down automation system built for this particle accelerator, brings great advantages to the operation of the accelerator by turning it faster and easier to operate, requiring less human presence, and adding the possibility of total remote control in safe conditions.

  18. Particle Accelerator Focus Automation

    Directory of Open Access Journals (Sweden)

    Lopes José

    2017-08-01

    Full Text Available The Laboratório de Aceleradores e Tecnologias de Radiação (LATR at the Campus Tecnológico e Nuclear, of Instituto Superior Técnico (IST has a horizontal electrostatic particle accelerator based on the Van de Graaff machine which is used for research in the area of material characterization. This machine produces alfa (He+ and proton (H+ beams of some μA currents up to 2 MeV/q energies. Beam focusing is obtained using a cylindrical lens of the Einzel type, assembled near the high voltage terminal. This paper describes the developed system that automatically focuses the ion beam, using a personal computer running the LabVIEW software, a multifunction input/output board and signal conditioning circuits. The focusing procedure consists of a scanning method to find the lens bias voltage which maximizes the beam current measured on a beam stopper target, which is used as feedback for the scanning cycle. This system, as part of a wider start up and shut down automation system built for this particle accelerator, brings great advantages to the operation of the accelerator by turning it faster and easier to operate, requiring less human presence, and adding the possibility of total remote control in safe conditions.

  19. Subsurface contaminants focus area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The US Department of Enregy (DOE) Subsurface Contaminants Focus Area is developing technologies to address environmental problems associated with hazardous and radioactive contaminants in soil and groundwater that exist throughout the DOE complex, including radionuclides, heavy metals; and dense non-aqueous phase liquids (DNAPLs). More than 5,700 known DOE groundwater plumes have contaminated over 600 billion gallons of water and 200 million cubic meters of soil. Migration of these plumes threatens local and regional water sources, and in some cases has already adversely impacted off-site rsources. In addition, the Subsurface Contaminants Focus Area is responsible for supplying technologies for the remediation of numerous landfills at DOE facilities. These landfills are estimated to contain over 3 million cubic meters of radioactive and hazardous buried Technology developed within this specialty area will provide efective methods to contain contaminant plumes and new or alternative technologies for development of in situ technologies to minimize waste disposal costs and potential worker exposure by treating plumes in place. While addressing contaminant plumes emanating from DOE landfills, the Subsurface Contaminants Focus Area is also working to develop new or alternative technologies for the in situ stabilization, and nonintrusive characterization of these disposal sites.

  20. Superconductivity in nanostructured lead

    Science.gov (United States)

    Lungu, Anca; Bleiweiss, Michael; Amirzadeh, Jafar; Saygi, Salih; Dimofte, Andreea; Yin, Ming; Iqbal, Zafar; Datta, Timir

    2001-01-01

    Three-dimensional nanoscale structures of lead were fabricated by electrodeposition of pure lead into artificial porous opal. The size of the metallic regions was comparable to the superconducting coherence length of bulk lead. Tc as high as 7.36 K was observed, also d Tc/d H was 2.7 times smaller than in bulk lead. Many of the characteristics of these differ from bulk lead, a type I superconductor. Irreversibility line and magnetic relaxation rates ( S) were also studied. S( T) displayed two maxima, with a peak value about 10 times smaller than that of typical high- Tc superconductors.

  1. Lead in the environment

    Science.gov (United States)

    Pattee, Oliver H.; Pain, Deborah J.; Hoffman, David J.; Rattner, Barnett A.; Burton, G. Allen; Cairns, John

    2003-01-01

    Anthropogenic uses of lead have probably altered its availability and environmental distribution more than any other toxic element. Consequently, lead concentrations in many living organisms may be approaching thresholds of toxicity for the adverse effects of lead. Such thresholds are difficult to define, as they vary with the chemical and physical form of lead, exposure regime, other elements present and also vary both within and between species. The technological capability to accurately quantify low lead concentrations has increased over the last decade, and physiological and behavioral effects have been measured in wildlife with tissue lead concentrations below those previously considered safe for humans.s.236 Consequently. lead criteria for the protection of wildlife and human health are frequently under review, and 'thresholds' of lead toxicity are being reconsidered. Proposed lead criteria for the protection of natural resources have been reviewed by Eisler. Uptake of lead by plants is limited by its generally low availability in soils and sediments, and toxicity may be limited by storage mechanisms and its apparently limited translocation within most plants. Lead does not generally accumulate within the foliar parts of plants, which limits its transfer to higher trophic levels. Although lead may concentrate in plant and animal tissues, no evidence of biomagnification exists. Acid deposition onto surface waters and soils with low buffering capacity may influence the availability of lead for uptake by plants and animals, and this may merit investigation at susceptible sites. The biological significance of chronic low-level lead exposure to wildlife is sometimes difficult to quantify. Animals living in urban environments or near point sources of lead emission are inevitably subject to greater exposure to lead and enhanced risk of lead poisoning. Increasingly strict controls on lead emissions in many countries have reduced exposure to lead from some sources

  2. Arkansas People Participating in Lead Education (APPLE): results of a lead-safe training program.

    Science.gov (United States)

    Ferguson, Alesia; Bursac, Zoran; Kern, David F

    2011-06-01

    Lead is still seen as one of the most harmful environmental toxins for young children, with the predominant source being deteriorating lead-based paint. Those at continued risk include those living in homes built before 1978, renovators and remodelers, and especially those with limited access to proper healthcare and diets. Proper training on lead-safe work practices focused on preventing and reducing the spread of lead dust can help reduce lead exposure. Presented in this paper are experiences in delivering lead-safe work practices training in six Arkansas cities, and results from pre- and post- surveys delivered before and immediately after the training. Pre- and post-surveys assess strong and weak areas of training. Participants demonstrated positive shifts in attitude and behavior towards lead-safe work practices following training. However, our research found that more emphasis should be focused on clarifying current lead exposure sources and routes for children.

  3. Focus on Russia

    International Nuclear Information System (INIS)

    Van Koningsbrugge, H.

    2008-01-01

    A few articles in this magazine focus on the developments and policies in Russia. The titles of some of the articles are 'Between state power and liberal reform' on the task of the new Russian president to find a new balance between government interference and market economy; 'Green light for green energy' on the willingness of the Russian government to stimulate renewable energy; 'Russian power play' on the role of Gazprom in the liberalization of the Russian power market; 'Gazprom's risky strategy' on it's pricing strategy

  4. Focus on Organic Conductors

    Directory of Open Access Journals (Sweden)

    Shinya Uji, Takehiko Mori and Toshihiro Takahashi

    2009-01-01

    Full Text Available Organic materials are usually thought of as electrical insulators. Progress in chemical synthesis, however, has brought us a rich variety of conducting organic materials, which can be classified into conducting polymers and molecular crystals. Researchers can realize highly conducting molecular crystals in charge-transfer complexes, where suitable combinations of organic electron donor or acceptor molecules with counter ions or other organic molecules provide charge carriers. By means of a kind of chemical doping, the charge-transfer complexes exhibit high electrical conductivity and, thanks to their highly crystalline nature, even superconductivity has been observed. This focus issue of Science and Technology of Advanced Materials is devoted to the research into such 'organic conductors'The first organic metal was (TTF(TCNQ, which was found in 1973 to have high conductivity at room temperature and a metal–insulator transition at low temperatures. The first organic superconductor was (TMTSF2PF6, whose superconductivity under high pressures was reported by J´erome in 1980. After these findings, the research on organic conductors exploded. Hundreds of organic conductors have been reported, among which more than one hundred exhibit superconductivity. Recently, a single-component organic conductor has been found with metallic conductivity down to low temperatures.In these organic conductors, in spite of their simple electronic structures, much new physics has arisen from the low dimensionality. Examples are charge and spin density waves, characteristic metal–insulator transitions, charge order, unconventional superconductivity, superconductor–insulator transitions, and zero-gap conductors with Dirac cones. The discovery of this new physics is undoubtedly derived from the development of many intriguing novel organic conductors. High quality single crystals are indispensable to the precise measurement of electronic states.This focus issue

  5. Rheological phenomena in focus

    CERN Document Server

    Boger, DV

    1993-01-01

    More than possibly any other scientific discipline, rheology is easily visualized and the relevant literature contains many excellent photographs of unusual and often bizarre phenomena. The present book brings together these photographs for the first time. They are supported by a full explanatory text. Rheological Phenomena in Focus will be an indispensable support manual to all those who teach rheology or have to convince colleagues of the practical relevance of the subject within an industrial setting. For those who teach fluid mechanics, the book clearly illustrates the difference be

  6. Secondary lead production

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, R.G.

    1990-10-16

    This invention is concerned with the efficient recovery of soft lead from the paste component of used automobile lead-acid storage batteries. According to the invention, a scrap which contains lead oxide, lead sulfate, and antimony in an oxidized state is processed in the following steps to recover lead. A refractory lined reaction vessel is continuously charged with the scrap, along with a reductant effective for reducing lead oxide. The charged material is melted and agitated by means of a submerged lance at 900-1150{degree}C whereby some of the lead oxide of the scrap is reduced to form molten lead. A slag layer is then formed above the molten lead, and an amount of lead oxide is maintained in the slag layer. The molten lead, now containing under 0.5 wt % of antimony, is removed, and the antimony oxide in the scrap is concentrated as oxide in the slag layer. Preferred embodiments of the invention result in the production, in a single step, of a soft lead substantially free of antimony. The slag may be subsequently treated to reduce the antimony oxide and produce a valuable antimony-lead product. Further advantages of the process are that a wet battery paste may be used as the feed without prior drying, and the process can be conducted at a temperature 100-150{degree}C lower than in previously known methods. In addition, a smaller reactor can be employed which reduces both capital cost and fuel costs. The process of the invention is illustrated by descriptions of pilot plant tests. 1 fig.

  7. Focused detection logging technique

    International Nuclear Information System (INIS)

    Turcotte, R.E.

    1977-01-01

    In accordance with an illustrative embodiment of the present invention, a method and apparatus is disclosed for determining a characteristic of the media surrounding a borehole by emitting gamma radiation in at least one tightly collimated beam toward an earth formation adjacent a borehole, by detecting from a plurality of tightly collimated paths that are focused at a zone of intersection with and aligned to intersect with each emitted beam the gamma radiation scattered by the interaction of the emitted gamma radiation and the media at the zones of intersection, by misaligning the emitted beams and the tightly collimated paths to prevent their intersection, by detecting gamma radiation scattered by the interaction of the emitted gamma radiation and the media with the emitted beams and the tightly collimated paths misaligned and by determining from the detected gamma radiation a media characteristic. In one embodiment, the detection collimater used is formed of a material that is essentially opaque to gamma radiation at the energies of interest and includes a plurality of passageways that are spherically focused at a zone of intersection with one of the emitted beams of gamma radiation and that are arranged in a number of surfaces that are curved to be azimuthally symmetrical about the axis of the intersected beam. 14 figures

  8. Lead-Free Piezoelectrics

    CERN Document Server

    Nahm, Sahn

    2012-01-01

    Ecological restrictions in many parts of the world are demanding the elimination of Pb from all consumer items. At this moment in the piezoelectric ceramics industry, there is no issue of more importance than the transition to lead-free materials. The goal of Lead-Free Piezoelectrics is to provide a comprehensive overview of the fundamentals and developments in the field of lead-free materials and products to leading researchers in the world. The text presents chapters on demonstrated applications of the lead-free materials, which will allow readers to conceptualize the present possibilities and will be useful for both students and professionals conducting research on ferroelectrics, piezoelectrics, smart materials, lead-free materials, and a variety of applications including sensors, actuators, ultrasonic transducers and energy harvesters.

  9. Attentional Focusing Instructions and Force Production

    Directory of Open Access Journals (Sweden)

    David C Marchant

    2011-01-01

    Full Text Available Research progress assessing the role of attentional focusing instructions on skill acquisition and performance has lead researchers to apply this approach to force production tasks. Initial converging evidence indicates that force production tasks are sensitive to verbal instruction; externally focused instructions (onto movement outcomes, or onto the object force is being exerted against are shown to be more beneficial than internally focused instructions (focusing attention onto the movements being executed. These benefits are observed for maximal and accurate force production, as well as the maintenance of force production in prolonged tasks. A range of mechanisms are identified supporting the proposal that an external focus promotes movement efficiency in line with energy and effort conservation. Future research is required to assess how this developing body of work interacts with the broader understanding of psychological and physiological factors implicated in the effective production, maintenance and limitation of maximal or sub-maximal forces.

  10. Lead Poison Detection

    Science.gov (United States)

    1976-01-01

    With NASA contracts, Whittaker Corporations Space Science division has developed an electro-optical instrument to mass screen for lead poisoning. Device is portable and detects protoporphyrin in whole blood. Free corpuscular porphyrins occur as an early effect of lead ingestion. Also detects lead in urine used to confirm blood tests. Test is inexpensive and can be applied by relatively unskilled personnel. Similar Whittaker fluorometry device called "drug screen" can measure morphine and quinine in urine much faster and cheaper than other methods.

  11. Drowning: a leading killer!

    Directory of Open Access Journals (Sweden)

    Nuno Domingos Garrido

    2016-10-01

    Full Text Available Drowning kills at least 372,000 people worldwide every year and is the 3rd leading cause of unintentional death, accounting for 7% of all deaths stemming from accidents (WHO, 2014. Conceptually, “drowning” is a complex and multi-faceted phenomenon, characterized as a chain of events (Bierens, 2006. Drowning is defined as the process of experiencing respiratory impairment from immersion or submersion in liquid. Research on drowning as a phenomenon presents several difficulties - most of all, that global data concerning the number of occurrences are not accurate. Nevertheless, detailed analysis of the registered incidents allows the identification of risk factors of drowning. An in-depth analysis of the risk factors is the basis for the creation of targeted and effective strategies to prevent drowning. Due to variability of situations which could lead to a drowning episode, experts suggest the adoption of a multi-layer prevention model, rather than opting for isolated measures, since no single measure can prevent all deaths and injuries caused by submersion. Among the preventive measures we would like to emphasize instruction in swimming and water safety. So, what does "knowing how to swim" really mean? Some authors define mastery of this competence as swimming a given distance, while others put the emphasis on how this/any given distance is swum (Stallman, Junge, & Blixt, 2008. It has long been realized that there is no contradiction between learning those competencies which make a person less susceptible to drowning and those competencies which prepare the path towards higher levels of performance and competition. Aquatic movement researchers and practitioners and drowning prevention researchers and practitioners, share in the responsibility for drowning prevention though they are often unaware of it. The question “What should be taught to children?” is too infrequently asked. There remains great variation in what is taught and programs

  12. Doing focus group research

    DEFF Research Database (Denmark)

    Lindegaard, Laura Bang

    2014-01-01

    Scholars of ethnomethodologically informed discourse studies are often sceptical of the use of interview data such as focus group data. Some scholars quite simply reject interview data with reference to a general preference for so-called naturally occurring data. Other scholars acknowledge...... that interview data can be of some use if the distinction between natural and contrived data is given up and replaced with a distinction between interview data as topic or as resource. In greater detail, such scholars argue that interview data are perfectly adequate if the researcher wants to study the topic...... of interview interaction, but inadequate as data for studying phenomena that go beyond the phenomenon of interview interaction. Neither of these more and less sceptical positions are, on the face of it, surprising due to the ethnomethodological commitment to study social order as accomplished in situ...

  13. Focus on Succes

    Directory of Open Access Journals (Sweden)

    Ivan Slimák

    2011-10-01

    Full Text Available The Editor wishes to present the need and form of turning the focus of individuals and organisations to success, based on evaluating understanding of the situation, on complex improving the quality of work, production and life, and on awareness of accountability for consequences of one’s actions in the given environment and time. Understood by success is sustained financial and non-financial prosperity, whilst decisive is the evaluating process, the key element is loyalty of natural and physical persons, and the priority is loyalty of external customers. The address is targeted to would-be authors and readers of our Journal interested in engineering and management of quality of mutually correlate entities.

  14. Cosmological Final Focus Systems

    International Nuclear Information System (INIS)

    Irwin, J

    2004-01-01

    We develop the many striking parallels between the dynamics of light streams from distant galaxies and particle beams in accelerator final focus systems. Notably the deflections of light by mass clumps are identical to the kicks arising from the long-range beam-beam interactions of two counter-rotating particle beams (known as parasitic crossings). These deflections have sextupolar as well as quadrupolar components. We estimate the strength of such distortions for a variety of circumstances and argue that the sextupolar distortions from clumping within clusters may be observable. This possibility is enhanced by the facts that (1) the sextupolar distortions of background galaxies is a factor of 5 smaller than the quadrupolar distortion, (2) the angular orientation of the sextupolar and quadrupolar distortions from a mass distribution would be correlated, appearing as a slightly curved image, (3) these effects should be spatially clumped on the sky

  15. The FOCUS trial

    DEFF Research Database (Denmark)

    Glenthøj, Louise B; Fagerlund, Birgitte; Randers, Lasse

    2015-01-01

    BACKGROUND: Cognitive deficits are a distinct feature among people at ultra-high risk (UHR) for psychosis and pose a barrier to functional recovery. Insufficient evidence exists on how to ameliorate these cognitive deficits in patients at UHR for psychosis and hence improve daily living and quality...... of life. The aim of the trial is to investigate whether cognitive remediation can improve cognitive and psychosocial function in patients at UHR for psychosis. METHODS: The FOCUS trial (Function and Overall Cognition in Ultra-high risk States) is a randomised, parallel group, observer-blinded clinical...... trial enrolling 126 patients meeting the standardised criteria of being at UHR for psychosis. Patients are recruited from psychiatric in- and outpatient facilities in the Copenhagen catchment area. Patients are randomised to one of the two treatment arms: cognitive remediation plus standard treatment...

  16. Proceedings of the 43. annual conference of metallurgists of CIM and the 5. UBC-McGill biennial international symposium on fundamentals of mineral processing : particle size enlargement in mineral processing

    Energy Technology Data Exchange (ETDEWEB)

    Laskowski, J.S. [British Columbia Univ., Vancouver, BC (Canada)] (ed.)

    2004-07-01

    This conference focused on the technological, economic and environmental challenges of increased quantities of fine particles that result from mineral processing operations such as crushing and grinding. The fine particles create problems in both concentration unit operations and solid/liquid separation unit operations. In addition to introductory lectures on fine particle aggregation, the conference included sessions dealing with hydrophobic aggregation in fine particle beneficiation/flotation, flocculation, pelletization and briquetting. The conference featured 32 presentations of which 6 have been indexed separately for inclusion in this database. refs., tabs., figs.

  17. Lead poisoning in dogs

    Energy Technology Data Exchange (ETDEWEB)

    Bond, E; Kubin, R

    1949-01-01

    Diagnosis was made from clinical observation and laboratory examination of nine cases. A successful treatment is described based on the similarity of the metabolism of lead and calcium, the lead being deposited in the bones where it is harmless, if it remains there. Details are given of the treatment.

  18. Developmental immunotoxicology of lead

    International Nuclear Information System (INIS)

    Dietert, Rodney R.; Lee, Ji-Eun; Hussain, Irshad; Piepenbrink, Michael

    2004-01-01

    The heavy metal, lead, is a known developmental immunotoxicant that has been shown to produce immune alterations in humans as well as other species. Unlike many compounds that exert adverse immune effects, lead exposure at low to moderate levels does not produce widespread loss of immune cells. In contrast, changes resulting from lead exposure are subtle at the immune cell population level but, nevertheless, can be functionally dramatic. A hallmark of lead-induced immunotoxicity is a pronounced shift in the balance in T helper cell function toward T helper 2 responses at the expense of T helper 1 functions. This bias alters the nature and range of immune responses that can be produced thereby influencing host susceptibility to various diseases. Immunotoxic responses to lead appear to differ across life stages not only quantitatively with regard to dose response, but also qualitatively in terms of the spectrum of immune alterations. Experimental studies in several lab animal species suggest the latter stages of gestation are a period of considerable sensitivity for lead-induced immunotoxicity. This review describes the basic characteristics of lead-induced immunotoxicity emphasizing experimental animal results. It also provides a framework for the consideration of toxicant exposure effects across life stages. The existence of and probable basis for developmental windows of immune hyper-susceptibility are presented. Finally, the potential for lead to serve as a perinatal risk factor for childhood asthma as well as other diseases is considered

  19. Leading Educational Change Wisely

    Science.gov (United States)

    Forrester, Gillian

    2011-01-01

    In this article, the author reviews Christopher Branson's book entitled "Leading Educational Change Wisely". The book provides an alternative and engaging perspective on leading educational change. Branson utilises "wisdom" as its central conceptual device to present a thought-provoking and philosophical account on how leaders are able to build a…

  20. Focus on sustainability.

    Science.gov (United States)

    Thompson, R J; Godiksen, L; Hansen, G; Gustafson, D J; Brinkerhoff, D W; Ingle, M D; Rounds, T; Wing, H

    1990-01-01

    In recent years, sustainability has become one of the most critical concepts in international development and is having a dramatic impact on the way development is conceptualized and carried out. The US Agency for International Development (USAID) is incorporating this concept into its programs and projects. Factors encouraging sustainability of projects and programs include host government policies that support or constrain program objectives, national and/or local commitment to project goals, managerial leadership that helps shape improved policies, collaboration at all staff levels in program management, financial resources that cover program operational costs, appropriate program technology, integration of the program with the social and cultural setting of the country, community involvement in the program, sound environmental management, technical assistance oriented to transferring skills and increasing institutional capacity, perception by the host country that the project is "effective," training provided by the project to transfer skill needed for capacity-building, integration of the program into existing institutional framework, and external political, economic and environmental factors. Impediments to sustainability are often inherent in the donor agency's programming process. This includes the implicit assumption that program objectives can be accomplished in a relatively short time frame, when in fact capacity-building requires a lengthy commitment. USAID professionals are pressured to show near-term results which emphasize outputs rather than purpose and goal-level accomplishments achievable only after extensive effort. The emphasis on obligating money and on the project paper as a sales document leads project designers to talk with a great deal more certainty about project results than is warranted by the complex development situation. Uncertainty and flexibility should be designed into projects so activities and objects can change as more

  1. Lead-free piezoceramics.

    Science.gov (United States)

    Saito, Yasuyoshi; Takao, Hisaaki; Tani, Toshihiko; Nonoyama, Tatsuhiko; Takatori, Kazumasa; Homma, Takahiko; Nagaya, Toshiatsu; Nakamura, Masaya

    2004-11-04

    Lead has recently been expelled from many commercial applications and materials (for example, from solder, glass and pottery glaze) owing to concerns regarding its toxicity. Lead zirconium titanate (PZT) ceramics are high-performance piezoelectric materials, which are widely used in sensors, actuators and other electronic devices; they contain more than 60 weight per cent lead. Although there has been a concerted effort to develop lead-free piezoelectric ceramics, no effective alternative to PZT has yet been found. Here we report a lead-free piezoelectric ceramic with an electric-field-induced strain comparable to typical actuator-grade PZT. We achieved this through the combination of the discovery of a morphotropic phase boundary in an alkaline niobate-based perovskite solid solution, and the development of a processing route leading to highly textured polycrystals. The ceramic exhibits a piezoelectric constant d33 (the induced charge per unit force applied in the same direction) of above 300 picocoulombs per newton (pC N(-1)), and texturing the material leads to a peak d33 of 416 pC N(-1). The textured material also exhibits temperature-independent field-induced strain characteristics.

  2. Cable Diagnostic Focused Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Hartlein, R.A.; Hampton, R.N.

    2010-12-30

    This report summarizes an extensive effort made to understand how to effectively use the various diagnostic technologies to establish the condition of medium voltage underground cable circuits. These circuits make up an extensive portion of the electric delivery infrastructure in the United States. Much of this infrastructure is old and experiencing unacceptable failure rates. By deploying efficient diagnostic testing programs, electric utilities can replace or repair circuits that are about to fail, providing an optimal approach to improving electric system reliability. This is an intrinsically complex topic. Underground cable systems are not homogeneous. Cable circuits often contain multiple branches with different cable designs and a range of insulation materials. In addition, each insulation material ages differently as a function of time, temperature and operating environment. To complicate matters further, there are a wide variety of diagnostic technologies available for assessing the condition of cable circuits with a diversity of claims about the effectiveness of each approach. As a result, the benefits of deploying cable diagnostic testing programs have been difficult to establish, leading many utilities to avoid the their use altogether. This project was designed to help address these issues. The information provided is the result of a collaborative effort between Georgia Tech NEETRAC staff, Georgia Tech academic faculty, electric utility industry participants, as well as cable system diagnostic testing service providers and test equipment providers. Report topics include: •How cable systems age and fail, •The various technologies available for detecting potential failure sites, •The advantages and disadvantages of different diagnostic technologies, •Different approaches for utilities to employ cable system diagnostics. The primary deliverables of this project are this report, a Cable Diagnostic Handbook (a subset of this report) and an online

  3. Can You Lead Me Now? Leading in the Complex World of Homeland Security

    National Research Council Canada - National Science Library

    Joyce, Nola

    2007-01-01

    This thesis focuses on a theory of leading and the activities and processes used to move a bureaucratic, public agency to a higher level of fitness in the contexts of dynamic equilibrium and the edge of chaos...

  4. Lead poisoning in dogs

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, M R; Lewis, G

    1963-08-03

    Within a short period, 14 cases of lead poisoning in the dogs have been encountered. A detailed record appears justified as no published reference can be found to this condition occurring in Britain and because reports from other countries stress the similarity of the clinical manifestations of lead poisoning to those of the common infections of the dog. Five of the 14 clinical cases of lead poisoning are described. The available literature is reviewed and the diagnosis and significance of the condition discussed. 19 references, 2 tables.

  5. Stress wave focusing transducers

    Energy Technology Data Exchange (ETDEWEB)

    Visuri, S.R., LLNL

    1998-05-15

    Conversion of laser radiation to mechanical energy is the fundamental process behind many medical laser procedures, particularly those involving tissue destruction and removal. Stress waves can be generated with laser radiation in several ways: creation of a plasma and subsequent launch of a shock wave, thermoelastic expansion of the target tissue, vapor bubble collapse, and ablation recoil. Thermoelastic generation of stress waves generally requires short laser pulse durations and high energy density. Thermoelastic stress waves can be formed when the laser pulse duration is shorter than the acoustic transit time of the material: {tau}{sub c} = d/c{sub s} where d = absorption depth or spot diameter, whichever is smaller, and c{sub s} = sound speed in the material. The stress wave due to thermoelastic expansion travels at the sound speed (approximately 1500 m/s in tissue) and leaves the site of irradiation well before subsequent thermal events can be initiated. These stress waves, often evolving into shock waves, can be used to disrupt tissue. Shock waves are used in ophthalmology to perform intraocular microsurgery and photodisruptive procedures as well as in lithotripsy to fragment stones. We have explored a variety of transducers that can efficiently convert optical to mechanical energy. One such class of transducers allows a shock wave to be focused within a material such that the stress magnitude can be greatly increased compared to conventional geometries. Some transducer tips could be made to operate regardless of the absorption properties of the ambient media. The size and nature of the devices enable easy delivery, potentially minimally-invasive procedures, and precise tissue- targeting while limiting thermal loading. The transducer tips may have applications in lithotripsy, ophthalmology, drug delivery, and cardiology.

  6. Lead in Construction

    National Research Council Canada - National Science Library

    1993-01-01

    Although Occupational Safety and Health Administration (OSHA) regulations for occupational lead exposure have been in effect since 1971 for the construction and general industries, the agency regulations for general industry in 1978...

  7. Radiation shielding lead shield

    International Nuclear Information System (INIS)

    Dei, Shoichi.

    1991-01-01

    The present invention concerns lead shields for radiation shielding. Shield boxes are disposed so as to surround a pipeline through which radioactive liquids, mists or like other objects are passed. Flanges are formed to each of the end edges of the shield boxes and the shield boxes are connected to each other by the flanges. Upon installation, empty shield boxes not charged with lead particles and iron plate shields are secured at first at the periphery of the pipeline. Then, lead particles are charged into the shield boxes. This attains a state as if lead plate corresponding to the depth of the box is disposed. Accordingly, operations for installation, dismantling and restoration can be conducted in an empty state with reduced weight to facilitate the operations. (I.S.)

  8. Focus on Quantum Cryptography

    International Nuclear Information System (INIS)

    Kwiat, Paul G.

    2002-01-01

    Full text: In our modern era of telecommunications and the Internet, information has become a valuable commodity. Sometimes it must therefore be protected against theft - in this case, loss of secret information to an eavesdropper. Most of today's transactions are protected using encryption unproven to be secure against a computational attack by a classical computer and, in fact, the standardly used encryption algorithms are provably vulnerable to the mind-boggling parallelism of a quantum computer, should one ever be physically realized. Enter quantum cryptography. Underlying nearly all forms of encryption is the necessity for a truly secret key, a random string of zeros and ones; the basic notion of quantum cryptography is to employ single photon transmissions (or the closest attainable approximation to these) to distribute the random key material, while removing the threat of an undetected eavesdropper. Now, nearly twenty years since the seminal quantum cryptography paper by Bennett and Brassard (Bennett C H and Brassard G 1984 Proc. IEEE Int. Conf. on Computers, Systems, and Signal Processing (Bangalore) (New York: IEEE) pp 175-9), we take a look at several state-of-the-art implementations, and glimpse how future quantum cryptosystems might look. We start with papers from three of the world's leading experimental quantum cryptography efforts: Stucki et al and Bethune and Risk describe working systems for quantum key distribution (QKD) over telecommunications fibres (at 1550 nanometres and 1300 nanometres, respectively). The former's achievement of quantum key exchange over 67 kilometres of optical fibre is a world record, as is the experimental demonstration by Hughes et al of daylight free-space QKD over a 10 km atmospheric range. Next, Luetkenhaus and Jahma explore the possible vulnerabilities of such systems (which employ attenuated laser pulses instead of actual single photon states) to conceivable future eavesdropping technologies. Enzer et al have

  9. Lead contamination of inexpensive plastic jewelry

    Energy Technology Data Exchange (ETDEWEB)

    Yost, Jamie L. [Department of Chemistry, Ashland University, Ashland, Ohio (United States); Weidenhamer, Jeffrey D. [Department of Chemistry, Ashland University, Ashland, Ohio (United States)], E-mail: jweiden@ashland.edu

    2008-04-15

    The neurological hazards of lead to children are well-known. As a result of recent documented cases of lead poisoning, regulatory attention in the United States has focused on the lead content of children's metal jewelry. By contrast, little is known about the possible hazards of plastic jewelry items. The objective of this study was to determine whether inexpensive plastic jewelry is a possible source of toxic lead for children. Samples of more than 100 inexpensive plastic jewelry items were analyzed for lead content. Beads were screened by soaking in 1 M nitric acid. Nine items found to release more than 30 {mu}g of lead per bead were further tested for accessible lead, and scrapings of the bead coatings were analyzed for total lead content. The maximum accessible lead found was 49 {mu}g per bead, which is below the current US Consumer Product Safety Commission limit of 175 {mu}g. However, when the number of beads in each item was taken into account, six of the nine leaded samples contained more than 175 {mu}g accessible lead per item. The lead in these items appears to be associated with lead-based paints used to produce glossy coatings on imitation pearls and similar items. Coatings obtained by scraping individual beads contained 3.5-23% lead, which far exceeds the US regulatory limit of 0.06% lead in paints on items intended for children. Our results demonstrate that plastic jewelry items merit the attention of public health and consumer protection agencies seeking to limit the exposure of children to lead.

  10. Lead contamination of inexpensive plastic jewelry

    International Nuclear Information System (INIS)

    Yost, Jamie L.; Weidenhamer, Jeffrey D.

    2008-01-01

    The neurological hazards of lead to children are well-known. As a result of recent documented cases of lead poisoning, regulatory attention in the United States has focused on the lead content of children's metal jewelry. By contrast, little is known about the possible hazards of plastic jewelry items. The objective of this study was to determine whether inexpensive plastic jewelry is a possible source of toxic lead for children. Samples of more than 100 inexpensive plastic jewelry items were analyzed for lead content. Beads were screened by soaking in 1 M nitric acid. Nine items found to release more than 30 μg of lead per bead were further tested for accessible lead, and scrapings of the bead coatings were analyzed for total lead content. The maximum accessible lead found was 49 μg per bead, which is below the current US Consumer Product Safety Commission limit of 175 μg. However, when the number of beads in each item was taken into account, six of the nine leaded samples contained more than 175 μg accessible lead per item. The lead in these items appears to be associated with lead-based paints used to produce glossy coatings on imitation pearls and similar items. Coatings obtained by scraping individual beads contained 3.5-23% lead, which far exceeds the US regulatory limit of 0.06% lead in paints on items intended for children. Our results demonstrate that plastic jewelry items merit the attention of public health and consumer protection agencies seeking to limit the exposure of children to lead

  11. Lead poisoning in mink

    Energy Technology Data Exchange (ETDEWEB)

    Purdy, J G

    1962-03-01

    This paper describes a case of lead poisoning in minks. The mink were housed in pens which had been painted with a bridge paint containing lead. They had chewed on the pen and ingested the paint. The animals that did not die were moved to new pens, and vitamin D and calcium gluconate were added to their diets. In three days, a marked improvement was seen in the food and water consumption, and convolutions became less frequent.

  12. Lead poisoning in dogs

    International Nuclear Information System (INIS)

    Zook, B.C.; Carpenter, J.L.; Leeds, E.B.

    1969-01-01

    Lead poisoning was diagnosed and studied in 60 dogs. It was found that lead poisoning is a common disease of young dogs, especially in the summer and fall, and is related to their chewing and eating habits resulting in the ingestion of paint, linoleum, or other lead-containing materials. The signs were characterized by gastrointestinal dysfunction (colic, vomiting, and diarrhea) and nervous disorders (convulsions, hysteria, nervousness, behavioral changes). The blood findings, which the authors consider nearly pathognomonic, consisted of numerous stippled and immature (especially nucleated) erythrocytes in the absence of severe anemia. Protein and casts were frequently found in the urine. Radiography sometimes revealed lead-containing particles in the gastro-intestinal tract, and lead lines were occasionally detected in the metaphysis of long bones in immature dogs. Treatment with calcium ethylenediamine-tetraacetic acid resulted in rapid and often dramatic recoveries in nearly all instances. Removal of lead from the gastrointestinal tract and treatment to relieve pronounced central nervous disorders was sometimes necessary. 40 references, 6 figures, 7 tables

  13. Magnesium Diboride Current Leads

    Science.gov (United States)

    Panek, John

    2010-01-01

    A recently discovered superconductor, magnesium diboride (MgB2), can be used to fabricate conducting leads used in cryogenic applications. Dis covered to be superconducting in 2001, MgB2 has the advantage of remaining superconducting at higher temperatures than the previously used material, NbTi. The purpose of these leads is to provide 2 A of electricity to motors located in a 1.3 K environment. The providing environment is a relatively warm 17 K. Requirements for these leads are to survive temperature fluctuations in the 5 K and 11 K heat sinks, and not conduct excessive heat into the 1.3 K environment. Test data showed that each lead in the assembly could conduct 5 A at 4 K, which, when scaled to 17 K, still provided more than the required 2 A. The lead assembly consists of 12 steelclad MgB2 wires, a tensioned Kevlar support, a thermal heat sink interface at 4 K, and base plates. The wires are soldered to heavy copper leads at the 17 K end, and to thin copper-clad NbTi leads at the 1.3 K end. The leads were designed, fabricated, and tested at the Forschungszentrum Karlsruhe - Institut foer Technische Physik before inclusion in Goddard's XRS (X-Ray Spectrometer) instrument onboard the Astro-E2 spacecraft. A key factor is that MgB2 remains superconducting up to 30 K, which means that it does not introduce joule heating as a resistive wire would. Because the required temperature ranges are 1.3-17 K, this provides a large margin of safety. Previous designs lost superconductivity at around 8 K. The disadvantage to MgB2 is that it is a brittle ceramic, and making thin wires from it is challenging. The solution was to encase the leads in thin steel tubes for strength. Previous designs were so brittle as to risk instrument survival. MgB2 leads can be used in any cryogenic application where small currents need to be conducted at below 30 K. Because previous designs would superconduct only at up to 8 K, this new design would be ideal for the 8-30 K range.

  14. Gas cooled leads

    International Nuclear Information System (INIS)

    Shutt, R.P.; Rehak, M.L.; Hornik, K.E.

    1993-01-01

    The intent of this paper is to cover as completely as possible and in sufficient detail the topics relevant to lead design. The first part identifies the problems associated with lead design, states the mathematical formulation, and shows the results of numerical and analytical solutions. The second part presents the results of a parametric study whose object is to determine the best choice for cooling method, material, and geometry. These findings axe applied in a third part to the design of high-current leads whose end temperatures are determined from the surrounding equipment. It is found that cooling method or improved heat transfer are not critical once good heat exchange is established. The range 5 5 but extends over a large of values. Mass flow needed to prevent thermal runaway varies linearly with current above a given threshold. Below that value, the mass flow is constant with current. Transient analysis shows no evidence of hysteresis. If cooling is interrupted, the mass flow needed to restore the lead to its initially cooled state grows exponentially with the time that the lead was left without cooling

  15. A self-focusing mercury jet target

    CERN Document Server

    Johnson, C

    2002-01-01

    Mercury jet production targets have been studied in relation to antiproton production and, more recently, pion production for a neutrino factory. There has always been a temptation to include some self-focusing of the secondaries by passing a current through the mercury jet analogous to the already proven lithium lens. However, skin heating of the mercury causes fast vaporization leading to the development of a gliding discharge along the surface of the jet. This external discharge can, nevertheless, provide some useful focusing of the secondaries in the case of the neutrino factory. The technical complications must not be underestimated.

  16. Radiation reaction in a continuous focusing channel

    International Nuclear Information System (INIS)

    Huang, Z.; Chen, P.; Ruth, R.D.

    1995-01-01

    We show that the radiation damping rate of the transverse action of a particle in a straight, continuous focusing system is independent of the particle energy, and that no quantum excitation is induced. This absolute damping effect leads to the existence of a transverse ground state to which the particle inevitably decays and yields the minimum beam emittance that one can ever attain, γε min =ℎ/2mc, limited only by the uncertainty principle. Because of adiabatic invariance, the particle can be accelerated along the focusing channel in its ground state without any radiation energy loss

  17. Leading with charisma.

    Science.gov (United States)

    Davidhizar, R

    1993-04-01

    Traditionally, leaders have used characteristics related to authority, control, competition and logic. Such approaches are more autocratic, and task-oriented. With changes in society, employers are focusing less on tasks and more on job satisfaction. Leaders are focusing on co-operation versus competition. Human relations and recognition are being used as motivators. Charisma is an important characteristic for leaders who wish to motivate by interpersonal characteristics. Transformational leadership is an emerging paradigm for modern management and can be important to the modern nurse manager as well. This paper describes charisma and how it can be useful to the nurse manager.

  18. Relational Perspectives on Leading

    DEFF Research Database (Denmark)

    Relational Perspectives on Leading discusses leadership from a relational and social constructionism perspective as practiced on an everyday basis between people. The book pursues a fast growing, practice-based approach - particularly within the Anglo-Saxon parts of the world - to organization...

  19. Learn about Lead

    Science.gov (United States)

    ... Search Main menu Environmental Topics Air Bed Bugs Chemicals and Toxics Environmental Information by Location Greener Living Health Land, ... it has some beneficial uses, it can be toxic to humans and animals causing of health ... some types of industrial facilities, and past use of lead-based paint ...

  20. Leading Causes of Blindness

    Science.gov (United States)

    ... have cataracts. They are the leading cause of blindness in the world. By age 80, more than half of all people in the United States either will have a cataract or have had cataract surgery. Common symptoms are: Blurry vision Colors that seem faded Glare Not being able to ...

  1. Lead User Innovation

    DEFF Research Database (Denmark)

    Brem, Alexander; Larsen, Henry

    2015-01-01

    covers the opposite view, where a company actively searches and involves lead users, however, with limited success also. Based on both cases, we analyze how, in these emerging processes of relating, meaning is co-created in a way that narrows the shared conceptual space for imagination and collaboration...

  2. Girls Leading Outward

    Science.gov (United States)

    Hamed, Heather; Reyes, Jazmin; Moceri, Dominic C.; Morana, Laura; Elias, Maurice J.

    2011-01-01

    The authors describe a program implemented in Red Bank Middle School in New Jersey to help at-risk, minority middle school girls realize their leadership potential. The GLO (Girls Leading Outward) program was developed by the Developing Safe and Civil Schools Project at Rutgers University and is facilitated by university students. Selected middle…

  3. Leading through Conflict

    Science.gov (United States)

    Gerzon, Mark

    2006-01-01

    This article talks about leading significant learning opportunities through conflict of ideas in a school system. Catalyzing school change can turn emotional differences of opinion into learning opportunities. Leaders who want to deal effectively with these challenging, often tense situations need to be more than good managers. They need to be…

  4. Lead Time Study,

    Science.gov (United States)

    1982-05-01

    1979, the number of titanium fabrications dropped from 16 to 4, primarily because of the sponge shortage and EPA and OSHA requirements. Non-military...East - Taiwan, Korea, Singapore, Malaysia and Hong Kong. In addition, a significant amount of ceramic parts, lead frames and high technology

  5. Lead pollution in Islamabad

    International Nuclear Information System (INIS)

    Mohammad, D.; Khatoon, N.; Ishaque, M.; Ahmed, I.

    1997-01-01

    Lead pollution of urban area emanating from the vehicular exhaust alone is being labeled as one of the worst form of environmental degradation attracting our attention for remediation. For factual assessment samples were collected from different areas of Islamabad. These samples consisted of tree scrapings / peelings, which were dried and ground before undertaking analysis for the lead content. The samples were digested with an acid mixture to remove the organic matter and analyzed using GFAAS technique. A total of 81 samples have been analyzed. The results sowed a lead content varying in the range of 8-474 Mu g g/sup -1/) and 23 samples with Pb content <50 Mu g g-1 (8.0-50.0 Mu g g/sup -1/). Most of the samples also contained some growth which consisted of bacterial, algae and fugal cells and the results have been explained on the basis of Pb absorption by these cells. The procedure followed in this study is recommended for evaluation of lead pollution in urban areas. (author)

  6. EFFECT OF LEAD ACETATE

    African Journals Online (AJOL)

    MICROSOFT

    increase in the production of poultry meat at a reasonable cost (Alam et al., ...... 36(4): 537-541. Taggart MA, Figuerola J, Green AJ, Mateo R, Deacon C, Osborn D, ... selenium, lead and copper levels in the livers and bones of five waterfowl ...

  7. Intoxication for lead

    International Nuclear Information System (INIS)

    Velez, Ruben Dario; Tamayo, Margarita Maria

    1999-01-01

    We present a case of a hospitalized girl with bronchopneumonia, who needed mechanic ventilation. Also she had a developmental delay and Burtons border in gums. Radiological studies showed dense transverse metaphiseal bands in long bones and hyperdensity in basal ganglia. We found high serum lead levels

  8. Lead Thickness Measurements

    International Nuclear Information System (INIS)

    Rucinski, R.

    1998-01-01

    The preshower lead thickness applied to the outside of D-Zero's superconducting solenoid vacuum shell was measured at the time of application. This engineering documents those thickness measurements. The lead was ordered in sheets 0.09375-inch and 0.0625-inch thick. The tolerance on thickness was specified to be +/- 0.003-inch. The sheets all were within that thickness tolerance. The nomenclature for each sheet was designated 1T, 1B, 2T, 2B where the numeral designates it's location in the wrap and 'T' or 'B' is short for 'top' or 'bottom' half of the solenoid. Micrometer measurements were taken at six locations around the perimeter of each sheet. The width,length, and weight of each piece was then measured. Using an assumed pure lead density of 0.40974 lb/in 3 , an average sheet thickness was calculated and compared to the perimeter thickness measurements. In every case, the calculated average thickness was a few mils thinner than the perimeter measurements. The ratio was constant, 0.98. This discrepancy is likely due to the assumed pure lead density. It is not felt that the perimeter is thicker than the center regions. The data suggests that the physical thickness of the sheets is uniform to +/- 0.0015-inch.

  9. Anatomy of lead poisoning

    African Journals Online (AJOL)

    ABEOLUGBENGAS

    Results: The primary form of lead toxicity is by oxidative stress mechanisms, apoptosis and necrosis involving ... néfastes sur la reproduction à l'avenir. Résultats:La forme ... prostate cancers, abnormal sexual ..... ensure this work is a success.

  10. Scientometry Leading us Astray

    Czech Academy of Sciences Publication Activity Database

    Haindl, Michal

    2010-01-01

    Roč. 2010, č. 82 (2010), s. 8-8 ISSN 0926-4981 Institutional research plan: CEZ:AV0Z10750506 Keywords : scientometry Subject RIV: BD - Theory of Information http://ercim-news.ercim.eu/en82/european-scene/ scientometry -leading-us-astray

  11. Total contribution of airborne lead to blood lead.

    OpenAIRE

    Manton, W I

    1985-01-01

    A nine year study of blood lead concentrations and isotope ratios carried out on a married couple shows that pulmonary deposition cannot account for all the airborne lead in blood; that lead from bone may comprise 70% of blood lead; and that during pregnancy blood lead may double due to mobilisation of lead from bone.

  12. Total contribution of airborne lead to blood lead.

    Science.gov (United States)

    Manton, W I

    1985-01-01

    A nine year study of blood lead concentrations and isotope ratios carried out on a married couple shows that pulmonary deposition cannot account for all the airborne lead in blood; that lead from bone may comprise 70% of blood lead; and that during pregnancy blood lead may double due to mobilisation of lead from bone. PMID:3970881

  13. Seniors Take the Lead

    Science.gov (United States)

    Cohen, Maureen

    2012-01-01

    Many school leaders seek new strategies from their colleagues and education literature on how to develop and sustain a positive school culture where students feel safe and are able to reach their greatest potential in academic achievement. Leadership books focus on strategies of building professional learning communities and developing capacity…

  14. Safety and Health Topics: Lead

    Science.gov (United States)

    ... ammunition, pipes, cable covering, building material, solder, radiation shielding, collapsible tubes, and fishing weights. Lead is also ... lead linings in tanks and radiation protection, leaded glass, work involving soldering, and other work involving lead ...

  15. Focusators for laser-branding

    Science.gov (United States)

    Doskolovich, L. L.; Kazanskiy, N. L.; Kharitonov, S. I.; Uspleniev, G. V.

    A new method is investigated for synthesis of computer-generated optical elements: focusators that are able to focus the radial-symmetrical laser beam into complex focal contours, in particular into alphanumeric symbols. The method is based on decomposition of the focal contour into segments of straight lines and semi-circles, following corresponding spacing out of the focusator on elementary segments (concentric rings or sectors) and solution of the inverse task of focusing from focusator segments into corresponding elements of the focal contour. The results of numerical computing of the field from synthesized focusators into the letters are presented. The theoretical efficiency of the focusators discussed is no less than 85%. The amplitude masks and the results of operational studies of synthesized focusators are presented.

  16. Prosodic Focus Marking in Bai.

    NARCIS (Netherlands)

    Liu, Zenghui; Chen, A.; Van de Velde, Hans

    2014-01-01

    This study investigates prosodic marking of focus in Bai, a Sino-Tibetan language spoken in the Southwest of China, by adopting a semi-spontaneous experimental approach. Our data show that Bai speakers increase the duration of the focused constituent and reduce the duration of the post-focus

  17. Lead poisoning: The invisible disease

    Science.gov (United States)

    Friend, Milton

    1989-01-01

    Lead poisoning is an intoxication resulting from absorption of hazardous levels of lead into body tissues. Lead pellets from shot shells, when ingested, are the most common source of lead poisoning in migratory birds. Other far less common sources include lead fishing sinkers, mine wastes, paint pigments, bullets, and other lead objects that are swallowed.

  18. Lead toxicity: current concerns.

    OpenAIRE

    Goyer, R A

    1993-01-01

    Over the 20-year period since the first issue of Environmental Health Perspectives was published, there has been considerable progress in the understanding of the potential toxicity of exposure to lead. Many of these advances have been reviewed in published symposia, conferences, and review papers in EHP. This brief review identifies major advances as well as a number of current concerns that present opportunities for prevention and intervention strategies. The major scientific advance has be...

  19. CMS lead tungstate crystals

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    These crystals are made from lead tungstate, a crystal that is as clear as glass yet with nearly four times the density. They have been produced in Russia to be used as scintillators in the electromagnetic calorimeter on the CMS experiment, part of the LHC project at CERN. When an electron, positron or photon passes through the calorimeter it will cause a cascade of particles that will then be absorbed by these scintillating crystals, allowing the particle's energy to be measured.

  20. Maritime Load Dependent Lead Times - An Analysis

    DEFF Research Database (Denmark)

    Pahl, Julia; Voss, Stefan

    2017-01-01

    in production. Inspired by supply chain planning systems, we analyze the current state of (collaborative) planning in the maritime transport chain with focus on containers. Regarding the problem of congestion, we particularly emphasize on load dependent lead times (LDLT) which are well studied in production....

  1. Lead diffusion in monazite

    International Nuclear Information System (INIS)

    Gardes, E.

    2006-06-01

    Proper knowledge of the diffusion rates of lead in monazite is necessary to understand the U-Th-Pb age anomalies of this mineral, which is one of the most used in geochronology after zircon. Diffusion experiments were performed in NdPO 4 monocrystals and in Nd 0.66 Ca 0.17 Th 0.17 PO 4 polycrystals from Nd 0.66 Pb 0.17 Th 0.17 PO 4 thin films to investigate Pb 2+ + Th 4+ ↔ 2 Nd 3+ and Pb 2+ ↔ Ca 2+ exchanges. Diffusion annealings were run between 1200 and 1500 Celsius degrees, at room pressure, for durations ranging from one hour to one month. The diffusion profiles were analysed using TEM (transmission electronic microscopy) and RBS (Rutherford backscattering spectroscopy). The diffusivities extracted for Pb 2+ + Th 4+ ↔ 2 Nd 3+ exchange follow an Arrhenius law with parameters E equals 509 ± 24 kJ mol -1 and log(D 0 (m 2 s -1 )) equals -3.41 ± 0.77. Preliminary data for Pb 2+ ↔ Ca 2+ exchange are in agreement with this result. The extrapolation of our data to crustal temperatures yields very slow diffusivities. For instance, the time necessary for a 50 μm grain to lose all of its lead at 800 Celsius degrees is greater than the age of the Earth. From these results and other evidence from the literature, we conclude that most of the perturbations in U-Th-Pb ages of monazite cannot be attributed to lead diffusion, but rather to interactions with fluids. (author)

  2. lead glass brick

    CERN Multimedia

    When you look through the glass at a picture behind, the picture appears raised up because light is slowed down in the dense glass. It is this density (4.06 gcm-3) that makes lead glass attractive to physicists. The refractive index of the glass is 1.708 at 400nm (violet light), meaning that light travels in the glass at about 58% its normal speed. At CERN, the OPAL detector uses some 12000 blocks of glass like this to measure particle energies.

  3. Leading Change, Adding Value.

    Science.gov (United States)

    Evans, Nick

    2016-09-12

    Essential facts Leading Change, Adding Value is NHS England's new nursing and midwifery framework. It is designed to build on Compassion in Practice (CiP), which was published 3 years ago and set out the 6Cs: compassion, care, commitment, courage, competence and communication. CiP established the values at the heart of nursing and midwifery, while the new framework sets out how staff can help transform the health and care sectors to meet the aims of the NHS England's Five Year Forward View.

  4. Turning lead into gold

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø

    For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

  5. Remediation of lead contaminated soil

    International Nuclear Information System (INIS)

    Urban, W.; Krishnamurthy, S.

    1992-01-01

    Lead contaminated soil in urban area is of major concern because of the potential health risk to children. Many studies have established a direct correlation between lead in soil and elevated blood lead levels in children. In Minneapolis, Minnesota, Mielke et al. (1983) reported that 50% of the Hmong children with lead poisioning were in areas where soil lead levels were between 500 and 1000 micrograms per gram (ug/g), and 40% of the children suffering from lead poisioning lived in areas where soil lead levels exceeded 1000 ug/g. In urban areas, lead pollution in soil has come from many different sources. The sources include lead paint, lead batteries and automobile exhaust. Olson and Skogerbee (1975) found the following lead compounds in soils where the primary source of pollution was from automobiles: lead sulfate, lead oxide, lead dioxide, lead sulfide, and metallic lead. The primary form of lead found was lead sulfate. Lead sulfate, lead tetraoxide, white lead, and other forms of lead have been used in the manufacture of paints for houses. At present, two remediation techniques, solidification and Bureau of Mines fluosilicic acid leaching, are available for lead-contaminated sites. The objective of the present investigation at the Risk Reduction Engineering Laboratory (RREL), Edison, was to try to solubilize the lead species by appropriate reagents and then recover the contaminants by precipitation as lead sulfate, using environmentally acceptable methods. The apparatus used for mixing was a LabMaster mixer, with variable speed and high-shear impeller. Previous work had used nitric acid for dissolving metallic lead. Owing to the environmental concerns, it was decided to use acetic acid in the presence of oxygen. The theoretical justification for this approach is the favorable redox potential for the reaction between metallic lead, acetic acid, and gaseous oxygen

  6. Focus Groups Help To Focus the Marketing Strategy.

    Science.gov (United States)

    Ashar, Hanna; Lane, Maureen

    1996-01-01

    A university-based degree completion program for adults conducted focus group research to refine market positioning and promotion. Focus groups averaged five current students and recent graduates who reflected, demographically, the current student population. Results gave insight into reasons for selecting the university, aspects of the program…

  7. The optimum lead thickness for lead-activation detectors

    International Nuclear Information System (INIS)

    Si Fenni; Hu Qingyuan

    2009-01-01

    The optimum lead thickness for lead-activation detectors has been studied in this paper. First existence of the optimum lead thickness is explained theoretically. Then the optimum lead thickness is obtained by two methods, MCNP5 calculation and mathematical estimation. At last factors which affect the optimum lead thickness are discussed. It turns out that the optimum lead thickness is irrelevant to incident neutron energies. It is recommended 2.5 cm generally.

  8. NRC/UBC fuelling station with intelligent compression

    International Nuclear Information System (INIS)

    Dada, A.; Boyd, B.; Law, L.; Semczyszyn, D.

    2004-01-01

    BOC Canada Ltd. will design, integrate and construct the second fueling station on the Hydrogen Highway. This station will be located at the National Research Council's Institute for Fuel Cell Innovation on the campus of the University of British Columbia. BOC's design will bring together an existing alkaline electrolyser, new compression, storage and dispensing. The station will be designed to serve fuel cell passenger vehicles using 350-bar storage. However, the flexible design concept will allow for many other user needs including the potential for servicing larger vehicles, as well as filling portable storage systems for use at satellite stations. The novel station design also offers the potential to fuel from multiple hydrogen sources. Together with NRC, this fueling station will be used to increase public, consumer and investor awareness of hydrogen technologies. Design and construction of this facility will assist in the development of industry codes and standards and familiarize authorities having jurisdiction with hydrogen fueling. The system concept offers the utmost attention to safety, novelty and flexibility. (author)

  9. Who will lead?

    Science.gov (United States)

    Gustafson, R P; Schlosser, J R

    1997-01-01

    A recent survey conducted by the UCLA Center for Health Services Management and the Physician Executive Practice of Heidrick & Struggles, an executive search firm, sheds light on the emerging physician executive's role. The goal of the research was to identify success factors as a means of evaluating and developing effective industry leaders. Respondents were asked to look at specific skills in relation to nine categories: Communication, leadership, interpersonal skills, self-motivation/management, organizational knowledge, organizational strategy, administrative skills, and thinking. Communication, leadership, and self-motivation/management emerged, in that order, as the three most important success factors for physician executives. An individual's general competencies, work styles, and ability to lead others through organizational restructuring defines his or her appropriateness for managerial positions in the health care industry.

  10. Leading co-production

    DEFF Research Database (Denmark)

    Tortzen, Anne

    leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

  11. Regulatory focus in groupt contexts

    NARCIS (Netherlands)

    Faddegon, Krispijn Johannes

    2009-01-01

    The thesis examines the influence of group processes on the regulatory focus of individual group members. It is demonstrated that the group situation can affect group members' regulatory focus both in a top-down fashion (via the identitiy of the group) and in a bottom-up fashion (emerging from the

  12. CTE's Focus on Continuous Improvement

    Science.gov (United States)

    Foster, John; Kelley, Patricia; Pritz, Sandy; Hodes, Carol

    2011-01-01

    Just one of the ways career and technical education (CTE) is revamping its image is through increased attention to data-driven instructional techniques as a means of improving and focusing instruction on what matters most. Accountability and data have increasingly become a core focus of research, news, and commentary about education in recent…

  13. On the Semantics of Focus

    Science.gov (United States)

    Kess, Joseph F.

    1975-01-01

    This article discusses the semantics of the notion of focus, insofar as it relates to Filipino languages. The evolution of this notion is reviewed, and an alternative explanation of it is given, stressing the fact that grammar and semantics should be kept separate in a discussion of focus. (CLK)

  14. Lead and lead-based alloys as waste matrix materials

    International Nuclear Information System (INIS)

    Arustamov, A.E.; Ojovan, M.I.; Kachalov, M.B.

    1999-01-01

    Metals and alloys with relatively low melting temperatures such as lead and lead-based alloys are considered in Russia as prospective matrices for encapsulation of spent nuclear fuel in containers in preparation for final disposal in underground repositories. Now lead and lead-based alloys are being used for conditioning spent sealed radioactive sources at radioactive waste disposal facilities

  15. Electric motors in the focus; Elektroantrieb im Focus

    Energy Technology Data Exchange (ETDEWEB)

    Wilms, Jan

    2013-05-15

    In August 2013, the first electric series production model of Ford comes to the market: the Focus Electric. A 23-kWh lithium-ion battery supplies the 107 kilowatts (145 hp) electric motor of the Focus Electric with energy. This battery enables a range of 162 kilometers and a limited top speed of 136 kilometers per hour. However, with 40,000 Euro this electric-powered vehicles is too expensive.

  16. Focusing mechanisms in the Pulselac CU accelerator

    International Nuclear Information System (INIS)

    Johnson, D.J.; Lockner, T.R.

    1986-06-01

    The post-acceleration of a 400 keV, 10 kA proton beam by a 200 kV magnetically insulated gap is investigated. The deflection from self and applied E and B fields are measured and compared to calculated values. We find that the beam is inadequately space-charge neutralized without gas puffs in regions of applied-B field to allow efficient transport. The beam is also non-current neutralized in these regions leading to self-magnetic deflection. The applied-B field is used to focus the beam both directly as a solenoidal lens and indirectly by defining the equipotential surfaces in the accelerating gap. It is also pointed out how azimuthal asymmetries in the beam current density and cathode plasma cause beam self-field asymmetries that lead to emittance growth. 4 refs., 4 figs

  17. Plasma devices for focusing extreme light pulses

    International Nuclear Information System (INIS)

    Fuchs, J.; Gonoskov, A.A.; Nakatsutsumi, M.; Nazarov, W.; Quere, F.; Sergeev, A.M.; Yan, X.Q.

    2014-01-01

    Since the inception of the laser, there has been a constant push toward increasing the laser peak intensity, as this has lead to opening the exploration of new territories, and the production of compact sources of particles and radiation with unprecedented characteristics. However, increasing the peak laser intensity is usually performed by enhancing the produced laser properties, either by lowering its duration or increasing its energy, which involves a great level of complexity for the laser chain, or comes at great cost. Focusing tightly is another possibility to increase the laser intensity, but this comes at the risk of damaging the optics with target debris, as it requires their placement in close proximity to the interaction region. Plasma devices are an attractive, compact alternative to tightly focus extreme light pulses and further increase the final laser intensity. (authors)

  18. Lead poisoning in calves

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, J E

    1964-01-01

    Over a three-year period a farmer lost seven calves in their second month of age. One year ago a tentative diagnosis of rabies was given and a brain was submitted to the Health of Animals Division for examination. No Negri bodies were found. The owner stated that the calves first appeared listless and later exhibited severe nervous signs. Deaths occurred in from one to 24 hours after onset of signs. Appetite and bowel movements were normal. There was no increase in temperature. The calf would lie quietly for an interval, then rise, run down the alley, press against a wall, and go into a convulsion. It acted as if it were in severe pain and during one of the intermittent convulsions, it jumped over a three-foot partition. This calf was sent to the Regional Veterinary Laboratory at Brighton for necropsy. The calf had been dead for 72 hours when submitted to the laboratory. The only gross findings were of mild pleurisy and hemorrhage on the kidney. A tentative diagnosis of lead poisoning was offered and specimens sent to the Division of Pharmacology and Toxicology, Ontario Veterinary College.

  19. Plutonium focus area: Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    To ensure research and development programs focus on the most pressing environmental restoration and waste management problems at the U.S. Department of Energy (DOE), the Assistant Secretary for the Office of Environmental Management (EM) established a working group in August 1993 to implement a new approach to research and technology development. As part of this approach, EM developed a management structure and principles that led to creation of specific focus areas. These organizations were designed to focus scientific and technical talent throughout DOE and the national scientific community on major environmental restoration and waste management problems facing DOE. The focus area approach provides the framework for inter-site cooperation and leveraging of resources on common problems. After the original establishment of five major focus areas within the Office of Technology Development (EM-50), the Nuclear Materials Stabilization Task Group (NMSTG, EM-66) followed EM-50's structure and chartered the Plutonium Focus Area (PFA). NMSTG's charter to the PFA, described in detail later in this book, plays a major role in meeting the EM-66 commitments to the Defense Nuclear Facilities Safety Board (DNFSB). The PFA is a new program for FY96 and as such, the primary focus of revision 0 of this Technology Summary is an introduction to the Focus Area; its history, development, and management structure, including summaries of selected technologies being developed. Revision 1 to the Plutonium Focus Area Technology Summary is slated to include details on all technologies being developed, and is currently planned for release in August 1996. The following report outlines the scope and mission of the Office of Environmental Management, EM-60, and EM-66 organizations as related to the PFA organizational structure

  20. Wing Leading Edge Concepts for Noise Reduction

    Science.gov (United States)

    Shmilovich, Arvin; Yadlin, Yoram; Pitera, David M.

    2010-01-01

    This study focuses on the development of wing leading edge concepts for noise reduction during high-lift operations, without compromising landing stall speeds, stall characteristics or cruise performance. High-lift geometries, which can be obtained by conventional mechanical systems or morphing structures have been considered. A systematic aerodynamic analysis procedure was used to arrive at several promising configurations. The aerodynamic design of new wing leading edge shapes is obtained from a robust Computational Fluid Dynamics procedure. Acoustic benefits are qualitatively established through the evaluation of the computed flow fields.

  1. Compact electron beam focusing column

    Science.gov (United States)

    Persaud, Arun; Leung, Ka-Ngo; Reijonen, Jani

    2001-12-01

    A novel design for an electron beam focusing column has been developed at LBNL. The design is based on a low-energy spread multicusp plasma source which is used as a cathode for electron beam production. The focusing column is 10 mm in length. The electron beam is focused by means of electrostatic fields. The column is designed for a maximum voltage of 50 kV. Simulations of the electron trajectories have been performed by using the 2D simulation code IGUN and EGUN. The electron temperature has also been incorporated into the simulations. The electron beam simulations, column design and fabrication will be discussed in this presentation.

  2. LEADING EFFECTIVE MEETINGS IN A HOSPITALITY ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Slobodan Ivanovic

    2010-06-01

    Full Text Available Today’s business environment demands of the individual manager to lead effective meetings. This is a skill which has to be studied and to be used and constantly optimized in order to keep the team focused on the goals that were set. Meetings keep track of a teams and the organizations goals that are being met or not being met. The specific focus of a certain meeting depends on what on what is to be achieved, whether that be setting goals or keeping evidence of what is being done, and to do this one needs the proper information tolead it correctly and efficiently.

  3. Leading Your Leaders

    Science.gov (United States)

    Hale, Wayne N.

    2008-01-01

    life is good. More often when an unbelievably difficult test fails, we are left with a very long discussion of why and what was wrong in the design or execution of the test. Make sure that the test is well defined. Even then, it is important to explain to your leaders what inherent accuracy (or error) the test conditions or equipment have and what the assumptions or initial conditions were for the test. Test results without a good understanding of the test's accuracy or the pedigree of the test assumptions are worth very little. Finally, there is flight test data. Always limited, never at the edge of the envelope, it still shows how the real hardware works in a combined environment. Flight experience is dangerous because it typically doesn't show how close to the edge of the cliff the equipment is operating, but it does demonstrate how the hardware really works. A flight test is the ultimate test, again taken with the knowledge that it is probably not the extreme but something more like the middle of the environmental and systems performance. Good understanding of a problem and its solution always relies on a combination of all these methods. Be sure to lead your leaders by using all the tools you have at your disposal. At the end of the day, decisions in space flight always come down to a risk trade. Our business is not remotely safe, not in the sense that the public, the media, or our legislators use the term. Everything we do has a risk, cost, schedule, or performance trade-off. For your leaders to make an appropriate decision, you need to educate them, lead them, talk with them, and engage them in the discussion until full understanding takes place. It's your job. *

  4. Improving medical decisions for incapacitated persons: does focusing on "accurate predictions" lead to an inaccurate picture?

    Science.gov (United States)

    Kim, Scott Y H

    2014-04-01

    The Patient Preference Predictor (PPP) proposal places a high priority on the accuracy of predicting patients' preferences and finds the performance of surrogates inadequate. However, the quest to develop a highly accurate, individualized statistical model has significant obstacles. First, it will be impossible to validate the PPP beyond the limit imposed by 60%-80% reliability of people's preferences for future medical decisions--a figure no better than the known average accuracy of surrogates. Second, evidence supports the view that a sizable minority of persons may not even have preferences to predict. Third, many, perhaps most, people express their autonomy just as much by entrusting their loved ones to exercise their judgment than by desiring to specifically control future decisions. Surrogate decision making faces none of these issues and, in fact, it may be more efficient, accurate, and authoritative than is commonly assumed.

  5. Mental health nursing: Daring to be different, special and leading recovery-focused care?

    Science.gov (United States)

    Santangelo, Peter; Procter, Nicholas; Fassett, Denise

    2018-02-01

    How mental health nursing is differentiated from other disciplines and professions, and what special contribution mental health nurses make to health services, is a question at the heart of contemporary practice. One of the significant challenges for mental health nurses is identifying, developing and advancing those aspects of their practice that they consider differentiate them in the multi-disciplinary mental health care team and to articulate clearly what a mental health nurse is and does. This paper draws on data from interviews with 36 mental health nurses in Australia who identified their practice as autonomous. Participants were asked the question, "What's special about mental health nursing?" Constructivist grounded theory techniques were applied to the research process. Findings were formulated and expressed as the 'Ten P's of the professional profile that is mental health nursing', which are 'present', 'personal', 'participant partnering', 'professional', 'phenomenological', 'pragmatic', 'power-sharing', 'psycho-therapeutic', 'proud' and 'profound'. The combined elements of the findings present a theoretical construct of mental health nursing practice as something distinctive and special. It provides a model and exemplar for contemporary practice in mental health nursing, embracing the role of mental health nurses in the health care workforce as being well placed as providers of productive and effective care. © 2017 Australian College of Mental Health Nurses Inc.

  6. Focusing liquid microjets with nozzles

    International Nuclear Information System (INIS)

    Acero, A J; Ferrera, C; Montanero, J M; Gañán-Calvo, A M

    2012-01-01

    The stability of flow focusing taking place in a converging–diverging nozzle, as well as the size of the resulting microjets, is examined experimentally in this paper. The results obtained in most aspects of the problem are similar to those of the classical plate-orifice configuration. There is, however, a notable difference between flow focusing in nozzles and in the plate-orifice configuration. In the former case, the liquid meniscus oscillates laterally (global whipping) for a significant area of the control parameter plane, a phenomenon never observed when focusing with the plate-orifice configuration. Global whipping may constitute an important drawback of flow focusing with nozzles because it reduces the robustness of the technique. (paper)

  7. Wayside Teaching: Focusing on Relationships

    Science.gov (United States)

    Powell, Sara Davis

    2011-01-01

    Wayside teaching focuses on building and maintaining positive relationships with students. Teachers can implement certain wayside teaching practices to end the year in a positive way and begin preparing for the next school year.

  8. A study of plasma focus

    International Nuclear Information System (INIS)

    Hirano, Katsumi; Majima, Kazuo

    1976-01-01

    The behavior of the plasma acceleration between electrodes, the phenomena due to the pinch effect at the top of the electrodes and the neutron emission mechanism were experimentally studied. The plasma focus device was a Mather type coaxial discharge device, and the instruments used for the present purpose were a Rogoski coil, an image converter camera, a scintillation detector and a silver foil activation counter. The results of the present experiment were as follows. Plasma focus was not definitely made under the same condition. When the focus was seen, a dip was observed in the discharge wave form, and the emissions of X-ray and neutrons were detected. The angular anisotropy of neutron emission was observed, and corresponds to a beam target model. The phenomena showing the occurrence of focus were seen, when the current sheet was produced at a delayed time after discharge, and arrived at the muzzle with large velocity. The relation between the number of emitted neutrons and the velocity of the current sheet was obtained, whereas no systematic relation exists between the number of emitted neutrons and the velocity of pinch. When the focus was not observed, no dip was seen in current wave form, and the emissions of X-ray and neutrons were not detected. The reason of no focus was considered. (Kato, T.)

  9. Manurial properties of lead nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Berry, R A

    1924-01-01

    Water culture, pot and field experiments were conducted in order to determine the toxic and stimulating limit of lead nitrate in solution. Oats and rye grass were evaluated for evidence of lead poisoning. Results indicate that except in solutions of fairly high concentration, soil adsorbs the lead and destroys the toxicity of soluble lead salts. There was evidence to show that the addition of lead salts increased the rate of nitrification in soil.

  10. High Performance Lead--free Piezoelectric Materials

    OpenAIRE

    Gupta, Shashaank

    2013-01-01

    Piezoelectric materials find applications in number of devices requiring inter-conversion of mechanical and electrical energy.  These devices include different types of sensors, actuators and energy harvesting devices. A number of lead-based perovskite compositions (PZT, PMN-PT, PZN-PT etc.) have dominated the field in last few decades owing to their giant piezoresponse and convenient application relevant tunability. With increasing environmental concerns, in the last one decade, focus has be...

  11. Lead in teeth from lead-dosed goats: Microdistribution and relationship to the cumulative lead dose

    International Nuclear Information System (INIS)

    Bellis, David J.; Hetter, Katherine M.; Jones, Joseph; Amarasiriwardena, Dula; Parsons, Patrick J.

    2008-01-01

    Teeth are commonly used as a biomarker of long-term lead exposure. There appear to be few data, however, on the content or distribution of lead in teeth where data on specific lead intake (dose) are also available. This study describes the analysis of a convenience sample of teeth from animals that were dosed with lead for other purposes, i.e., a proficiency testing program for blood lead. Lead concentration of whole teeth obtained from 23 animals, as determined by atomic absorption spectrometry, varied from 0.6 to 80 μg g -1 . Linear regression of whole tooth lead (μg g -1 ) on the cumulative lead dose received by the animal (g) yielded a slope of 1.2, with r 2 =0.647 (p -1 , were found in circumpulpal dentine. Linear regression of circumpulpal lead (μg g -1 ) on cumulative lead dose (g) yielded a slope of 23 with r 2 =0.961 (p=0.0001). The data indicated that whole tooth lead, and especially circumpulpal lead, of dosed goats increased linearly with cumulative lead exposure. These data suggest that circumpulpal dentine is a better biomarker of cumulative lead exposure than is whole tooth lead, at least for lead-dosed goats

  12. Lead pollution sources and Impacts

    International Nuclear Information System (INIS)

    El-Haggar, S.M.; Saad, S.G.; Saleh, S.K.; El-Kady, M.A.

    1996-01-01

    Despite the medical awareness of lead toxicity, and despite legislation designed to reduce environmental contamination, lead is one of the most widely used heavy metals. Significant human exposure occurs from automobile exhaust fumes, cigarette smoking, lead-based paints and plumbing systems lead spread in the environment can take place in several ways, the most important of which is through the lead compounds released in automobile exhaust as a direct result of the addition of tetraethyl or tetraethyl lead to gasoline as octane boosting agents. Of special is the effect of lead pollution on children, which affects their behavioral and educational attributes considerably. The major channel through through which lead is absorbed is through inhalation of lead compounds in the atmosphere. Lead is a heavy metal characterized its malleability, ductility and poor conduction of electricity. So, it has a wide range of applications ranging from battery manufacturing to glazing ceramics. It is rarely found free in nature but is present in several minerals and compounds. The aim of this paper is to discuss natural and anthropogenic sources of lead together with its distribution and trends with emphasis on egypt. The effects of lead pollution on human health, vegetation and welfare are also presented. It could be concluded that, the excessive release of lead into the environment, especially through the atmosphere, can produce many detrimental and sometimes fatal effects on human, agriculture and zoological life. Besides, it is very plain that there is a serious problem of pollution lead in egypt and specially in cairo. 7 figs

  13. HINS Linac front end focusing system R&D

    Energy Technology Data Exchange (ETDEWEB)

    Apollinari, G.; Carcagno, R.H.; Dimarco, J.; Huang, Y.; Kashikhin, V.V.; Orris, D.F.; Page, T.M.; Rabehl, R.; Sylvester, C.; Tartaglia, M.A.; Terechkine, I.; /Fermilab /Argonne

    2008-08-01

    This report summarizes current status of an R&D program to develop a focusing system for the front end of a superconducting RF linac. Superconducting solenoids will be used as focusing lenses in the low energy accelerating sections of the front end. The development of focusing lenses for the first accelerating section is in the production stage, and lens certification activities are in preparation at FNAL. The report contains information about the focusing lens design and performance, including solenoid, dipole corrector, and power leads, and about cryogenic system design and performance. It also describes the lens magnetic axis position measurement technique and discusses scope of an acceptance/certification process.

  14. HINS Linac front end focusing system R and D

    International Nuclear Information System (INIS)

    Apollinari, G.; Carcagno, R.H.; Dimarco, J.; Huang, Y.; Kashikhin, V.V.; Orris, D.F.; Page, T.M.; Rabehl, R.; Sylvester, C.; Tartaglia, M.A.; Terechkine, I.; Fermilab; Argonne

    2008-01-01

    This report summarizes current status of an R and D program to develop a focusing system for the front end of a superconducting RF linac. Superconducting solenoids will be used as focusing lenses in the low energy accelerating sections of the front end. The development of focusing lenses for the first accelerating section is in the production stage, and lens certification activities are in preparation at FNAL. The report contains information about the focusing lens design and performance, including solenoid, dipole corrector, and power leads, and about cryogenic system design and performance. It also describes the lens magnetic axis position measurement technique and discusses scope of an acceptance/certification process

  15. Verum focus and polar questions

    Directory of Open Access Journals (Sweden)

    Ion Giurgea

    2012-11-01

    Full Text Available We argue that some word order phenomena in Romanian and Sardinian are the result of a checking operation in the left periphery involving verum focus (i.e. focus on the polarity component of the sentence. In particular, this operation accounts for some word order patterns found in polar questions. In Romanian, polarity fronting is realized as head-movement of (V+T to a higher peripheral head which bears a Focus-probe. This licenses VS orders for predications in which VS is not allowed as a neutral order (i-level predicates, iteratives, generics. In Sardinian, an entire phrase headed by the lexical predicate (verbal non-finite form or non-verbal predicate is fronted before the auxiliary. We argue that this order is obtained by two movement operations, head-raising of Aux to Foc and movement of the predicate phrase to SpecFoc. We also present the semantics of polarity focus, distinguishing several types of focus (informational, emphatic, contrastive.

  16. Lead Contamination and Microbial Lead Tolerance in Soils at Major ...

    African Journals Online (AJOL)

    Devika

    ABSTRACT: Lead pollution and lead tolerance levels of microbes in soil at major road junctions in Benin. City were investigated. Results revealed that distance from the road junctions affected the concentrations of lead in soil, as well as the microbial population density and types of microbes present in the soil. The highest ...

  17. Lead Contamination and Microbial Lead Tolerance in Soils at Major ...

    African Journals Online (AJOL)

    Lead pollution and lead tolerance levels of microbes in soil at major road junctions in Benin City were investigated. Results revealed that distance from the road junctions affected the concentrations of lead in soil, as well as the microbial population density and types of microbes present in the soil. The highest concentrations ...

  18. Leaded gasoline - an environmental problem

    International Nuclear Information System (INIS)

    Petrushevska, Ljubica

    2001-01-01

    In the European countries it is a clear trend towards the increasing consumption of unleaded gasolines. Driving force of this trend is, on the one hand the high toxicity of lead compounds and on the other, the necessity of purification of exhaust gases by catalytic converters, for which the lead represent a catalyst poison. In Macedonia, the limit lead content in the leaded gasolines is relatively high (0,6 g/l), as well as the consumption of the leaded gasolines. Rapid and complete transition to unleaded gasolines can be realized by the concept of step by step reduction of lead in our gasolines. (Original)

  19. Experimental lead poisoning in chickens

    Energy Technology Data Exchange (ETDEWEB)

    Silven, L.

    1967-01-01

    Poisoning of water fowl due to the intake of lead shot is not rare in the USA. In order to study this kind of poisoning more closely domestic fowl were given varying amounts of lead shot and lead powder. This treatment did not provoke any symptoms of poisoning. Chemical analyses of different organs, muscles, skeleton and eggs yielded low lead values. It is concluded that the low toxicity of lead administered as lead shot to the domestic fowl is due to a low absorption rate from the gastro-intestinal tract.

  20. Decontamination and coating of lead

    International Nuclear Information System (INIS)

    Rankin, W.N.; Bush, S.P.; Lyon, C.E.; Walker, V.

    1988-01-01

    Technology is being developed to decontaminate lead used in shielding applications in contaminated environments for recycle as shieldings. Technology is also being developed to coat either decontaminated lead or new lead before it is used in contaminated environments. The surface of the coating is expected to be much easier to decontaminate than the original lead surface. If contamination becomes severely embedded in the coating and cannot be removed, it can be easily cut with a knife and removed from the lead. The used coating can be disposed of as radioactive (hot hazardous) waste. The lead can then be recoated for further use as a shielding material

  1. Magnetically focused liquid drop radiator

    Science.gov (United States)

    Botts, Thomas E.; Powell, James R.; Lenard, Roger

    1986-01-01

    A magnetically focused liquid drop radiator for application in rejecting rgy from a spacecraft, characterized by a magnetizable liquid or slurry disposed in operative relationship within the liquid droplet generator and its fluid delivery system, in combination with magnetic means disposed in operative relationship around a liquid droplet collector of the LDR. The magnetic means are effective to focus streams of droplets directed from the generator toward the collector, thereby to assure that essentially all of the droplets are directed into the collector, even though some of the streams may be misdirected as they leave the generator. The magnetic focusing means is also effective to suppress splashing of liquid when the droplets impinge on the collector.

  2. Finding beam focus errors automatically

    International Nuclear Information System (INIS)

    Lee, M.J.; Clearwater, S.H.; Kleban, S.D.

    1987-01-01

    An automated method for finding beam focus errors using an optimization program called COMFORT-PLUS. The steps involved in finding the correction factors using COMFORT-PLUS has been used to find the beam focus errors for two damping rings at the SLAC Linear Collider. The program is to be used as an off-line program to analyze actual measured data for any SLC system. A limitation on the application of this procedure is found to be that it depends on the magnitude of the machine errors. Another is that the program is not totally automated since the user must decide a priori where to look for errors

  3. Forming lead-based anodes

    Energy Technology Data Exchange (ETDEWEB)

    Ogorodnichuk, V I; Voitsekhovich, R I

    1972-01-01

    Lead-based anodes can be produced by forming a layer of lead dioxide by chemical treatment in a solution of sulfuric acid in potassium permanganate at 80 to 100/sup 0/. The solution is mixed by compressed air. (RWR)

  4. Correlation between some parameters of lead absorption and lead intoxication

    Science.gov (United States)

    Waldron, H. A.

    1971-01-01

    Waldron, H. A. (1971).Brit. J. industr. Med.,28, 195-199. Correlation between some parameters of lead absorption and lead intoxication. Use has been made of data collected over a number of years from workers exposed to a lead hazard in a motor-car factory. The correlations between various parameters of lead absorption and lead intoxication were computed, including blood and urine lead concentrations, urinary coproporphyrin, ALA and PBG concentrations, and haemoglobin concentration. In all, 15 correlation coefficients were calculated, of which only six showed a statistically significant result (i.e., Plead and urine lead (r = 0·38, Plead and coproporphyrin (r = 0·42, Plead and ALA (r = 0·43, Plead and PBG (r = 0·19, P<0·05). PMID:5572689

  5. Common ECG Lead Placement Errors. Part I: Limb Lead Reversals

    Directory of Open Access Journals (Sweden)

    Allison V. Rosen

    2015-10-01

    Full Text Available Background: Electrocardiography (ECG is a very useful diagnostic tool. However, errors in placement of ECG leads can create artifacts, mimic pathologies, and hinder proper ECG interpretation. It is important for members of the health care team to be able to recognize the common patterns resulting from lead placement errors. Methods: 12-lead ECGs were recorded in a single male healthy subject in his mid 20s. Six different limb lead reversals were compared to ECG recordings from correct lead placement. Results: Classic ECG patterns were observed when leads were reversed. Methods of discriminating these ECG patterns from true pathologic findings were described. Conclusion: Correct recording and interpretation of ECGs is key to providing optimal patient care. It is therefore crucial to be able to recognize common ECG patterns that are indicative of lead reversals.

  6. Focusing on key development challenges

    International Development Research Centre (IDRC) Digital Library (Canada)

    addresses today's pressing environmental, social, economic, and political ... telecentre.org. Harness science, technology, and innovation to promote sustainable development and reduce poverty. ... capacities, support research that would lead to better policies and ... country researchers, and the private sector to produce.

  7. Depletion field focusing in semiconductors

    NARCIS (Netherlands)

    Prins, M.W.J.; Gelder, Van A.P.

    1996-01-01

    We calculate the three-dimensional depletion field profile in a semiconductor, for a planar semiconductor material with a spatially varying potential upon the surface, and for a tip-shaped semiconductor with a constant surface potential. The nonuniform electric field gives rise to focusing or

  8. Focus group report, Part I

    International Nuclear Information System (INIS)

    1997-07-01

    The Waste Policy Institute, through a cooperative agreement with the U.S. Department of Energy's (DOE) Office of Science and Technology (OST), conducted two focus groups with people who live or work near DOE sites. The purpose of the focus groups was to gain a better understanding of the general community's information needs about the development of innovative technologies that are used in the cleanup of the sites. The authors wanted to better understand of what role these people want to play in the development of new technologies, how OST communication products can help facilitate that role, and the usefulness of current OST communication products. WPI held the focus groups in communities near the Idaho National Engineering and Environmental Laboratory (INEEL) and the Savannah River Site (SRS) because they are among the DOE sites that cannot be cleaned up before 2006. To include many facets of the communities, WPI randomly selected participants from membership lists of organized groups in each community including: elected officials, school boards, unions, chambers of commerce, economic development organizations, environmental organizations, health and human service organizations, and area clergy. While in the communities, WPI also interviewed stakeholders such as tribal representatives and a Citizens Advisory Board (CAB) member. Qualitative data gathered during the focus group sessions give some indication of general stakeholder opinions. However, the authors caution readers not to make broad assumptions about the general stakeholder audience based on the opinions of a limited number of general community stakeholders

  9. Technology for Education. IDRA Focus.

    Science.gov (United States)

    IDRA Newsletter, 1998

    1998-01-01

    This theme issue includes five articles that focus on technology for education to benefit all students, including limited-English-proficient, minority, economically disadvantaged, and at-risk students. "Coca-Cola Valued Youth Program Students Meet Peers Via Video Conference" (Linda Cantu, Leticia Lopez-De La Garza) describes how at-risk…

  10. Environmental Protection: a shifting focus

    NARCIS (Netherlands)

    Dr. ir. Jan Venselaar

    2004-01-01

    The last two decades have seen a fundamental change in the way chemistry handles environmental issues. A shift in focus has occurred from 'end-of-pipe' to prevention and process integration. Presently an even more fundamental change is brought about by the need for sustainable development. It is

  11. Focus groups in organizational research

    Directory of Open Access Journals (Sweden)

    L. Kamfer

    1989-05-01

    Full Text Available Focus groups are commonly used in marketing research. In this article an application of the focus group technique within an organizational context is described. Nine focus groups were conducted during the planning stage of a survey intended to establish employee perceptions of advancement policies and practices in a major South African manufacturing company. Fourteen themes emerged from a content analysis of the discussions. Two of these reflected aspects requiring commitment decisions from management toward the survey. The others indicated areas of concern which should be included in the survey. In this way, the focus groups contributed useful information for the subsequent sample survey. Opsomming Fokusgroepe word algemeen in bemarkingsnavorsing aangewend. In hierdie studie word 'n toepassingvan die fokusgroeptegniek in die konteks van 'n opname binne 'n organisasie beskryf. Nege fokusgroepbesprekings is gevoer tydens die beplanningstadium van 'n opname wat binne 'n Suid-Afrikaanse vervaardigingsonderneming gedoen is. Die doel van die opname was om die persepsies van werknemers teenoor die bestaande personeel- en bestuursontwikkelingsbeleid en -praktyke van die maatskappy te bepaal. Veertien temas is deur middel van 'n inhoudontleding gei'dentifiseer. Twee hiervan het aspekte aangedui waaroor bestuur beginselbesluite t.o.v. die opname sou moes neem. Die ander het probleemareas aangedui wat by die ondersoek selfingesluit behoort te word. Sodoende het die fokusgroepe inligting verskafwat vir die latere vraelysopname belangrik was.

  12. Verum focus and polar questions

    Directory of Open Access Journals (Sweden)

    Ion Giurgea

    2012-01-01

    Full Text Available We argue that some word order phenomena in Romanian and Sardinian are the result of a checkingoperation in the left periphery involving verum focus (i.e. focus on the polarity component of the sentence.In particular, this operation accounts for some word order patterns found in polar questions. In Romanian,polarity fronting is realized as head-movement of (V+T to a higher peripheral head which bears a Focusprobe.This licenses VS orders for predications in which VS is not allowed as a neutral order (i-levelpredicates, iteratives, generics. In Sardinian, an entire phrase headed by the lexical predicate (verbal nonfiniteform or non-verbal predicate is fronted before the auxiliary. We argue that this order is obtained bytwo movement operations, head-raising of Aux to Foc and movement of the predicate phrase to SpecFoc. Wealso present the semantics of polarity focus, distinguishing several types of focus (informational, emphatic,contrastive.

  13. Work and Family. Special Focus.

    Science.gov (United States)

    Goetz, Kathy, Ed.

    1992-01-01

    This newsletter issue focuses on issues concerning families with both parents employed outside the home and describes several employer programs designed to help employees balance their work and family life. The newsletter includes the following articles: (1) "Work and Family: 1992"; (2) "Levi Strauss and Co.--A Work/Family Program…

  14. FOREWORD: Focus on Advanced Ceramics Focus on Advanced Ceramics

    Science.gov (United States)

    Ohashi, Naoki

    2011-06-01

    Much research has been devoted recently to developing technologies for renewable energy and improving the efficiency of the processes and devices used in industry and everyday life. Efficient solutions have been found using novel materials such as platinum and palladium-based catalysts for car exhaust systems, samarium-cobalt and neodymium-iron-boron permanent magnets for electrical motors, and so on. However, their realization has resulted in an increasing demand for rare elements and in their deficit, the development of new materials based on more abundant elements and new functionalities of traditional materials. Moreover, increasing environmental and health concerns demand substitution of toxic or hazardous substances with nature-friendly alternatives. In this context, this focus issue on advanced ceramics aims to review current trends in ceramics science and technology. It is related to the International Conference on Science and Technology of Advanced Ceramics (STAC) held annually to discuss the emerging issues in the field of ceramics. An important direction of ceramic science is the collaboration between experimental and theoretical sciences. Recent developments in density functional theory and computer technology have enabled the prediction of physical and chemical properties of ceramics, thereby assisting the design of new materials. Therefore, this focus issue includes articles devoted to theory and advanced characterization techniques. As mentioned above, the potential shortage of rare elements is becoming critical to the industry and has resulted in a Japanese government initiative called the 'Ubiquitous Element Strategy'. This focus issue also includes articles related to this strategy and to the associated topics of energy conversion, such as phosphors for high-efficiency lighting and photocatalysts for solar-energy harvesting. We hope that this focus issue will provide a timely overview of current trends and problems in ceramics science and

  15. Lead poisoning in domestic ducks

    Energy Technology Data Exchange (ETDEWEB)

    Rac, R; Crisp, C S

    1954-05-01

    The death of wild ducks, due to the ingestion of lead shop, occurs frequently and is well documented. This paper discusses the death of domestic ducks due to the ingestion of lead. It describes the symptoms, and pathology of the lead poisoning of a clutch of 11 ducklings which were being raised on a farm in Australia. 3 references, 1 table.

  16. A study on lead equivalent

    International Nuclear Information System (INIS)

    Lin Guanxin

    1991-01-01

    A study on the rules in which the lead equivalent of lead glass changes with the energy of X rays or γ ray is described. The reason of this change is discussed and a new testing method of lead equivalent is suggested

  17. The Analysis on Leading industries in Central Java Province

    Directory of Open Access Journals (Sweden)

    Setyani Irmawati

    2016-06-01

    Full Text Available The purpose of this research is for identifying the types of industriesthat become leading industries in Central Java Province. The methods, used are LQ (SLQ and DLQ and Shift Share. The result of this research shows that the the leading industries in Central Java Province are beverage industry, tobacco processing industry, textile industry, apparel industry, wood industry, printing industry, furniture industry and other processing industries.In the future, the development of the industry should not only focus on the leading industries  but also onnon-leading industries, so that the non leading industries will not be left behind.

  18. Lead- or Lead-bismuth-cooled fast reactors

    International Nuclear Information System (INIS)

    Bouchter, J.C.; Courouau, J.L.; Dufour, P.; Guidez, J.; Latge, C.; Martinelli, L.; Renault, C.; Rimpault, G.

    2014-01-01

    Lead-cooled fast reactors are one of the 6 concepts retained for the 4. generation of nuclear reactors. So far no lead-cooled reactors have existed in the world except lead-bismuth-cooled reactors in soviet submarines. Some problems linked to the use of the lead-bismuth eutectic appeared but were satisfactorily solved by a more rigorous monitoring of the chemistry of the lead-bismuth coolant. Lead presents various advantages as a coolant: no reactivity with water and the air,a high boiling temperature and low contamination when irradiated. The main asset of the lead-bismuth alloy is the drop of the fusion temperature from 327 C degrees to 125 C degrees. The main drawback of using lead (or lead-bismuth) is its high corrosiveness with metals like iron, chromium and nickel. The high corrosiveness of the coolant implies low flow velocities which means a bigger core and consequently a bigger reactor containment. Different research programs in the world (in Europe, Russia and the USA) are reviewed in the article but it appears that the development of this type of reactor requires technological breakthroughs concerning materials and the resistance to corrosion. Furthermore the concept of lead-cooled reactors seems to be associated to a range of low output power because of the compromise between the size of the reactor and its resistance to earthquakes. (A.C.)

  19. Electrical properties of a novel lead alkoxide precursor: Lead glycolate

    International Nuclear Information System (INIS)

    Tangboriboon, Nuchnapa; Pakdeewanishsukho, Kittikhun; Jamieson, Alexander; Sirivat, Anuvat; Wongkasemjit, Sujitra

    2006-01-01

    The reaction of lead acetate trihydrate Pb(CH 3 COO) 2 .3H 2 O and ethylene glycol, using triethylenetetramine (TETA) as a catalyst, provides in one step access to a polymer-like precursor of lead glycolate [-PbOCH 2 CH 2 O-]. On the basis of high-resolution mass spectroscopy, chemical analysis composition, FTIR, 13 C-solid state NMR and TGA, the lead glycolate precursor can be identified as a trimer structure. The FTIR spectrum demonstrates the characteristics of lead glycolate; the peaks at 1086 and 1042 cm -1 can be assigned to the C-O-Pb stretchings. The 13 C-solid state NMR spectrum gives notably only one peak at 68.639 ppm belonging to the ethylene glycol ligand. The phase transformations of lead glycolate and lead acetate trihydrate to lead oxide, their microstructures, and electrical properties were found to vary with increasing temperature. The lead glycolate precursor has superior electrical properties relative to those of lead acetate trihydrate, suggesting that the lead glycolate precursor can possibly be used as a starting material for producing electrical and semiconducting ceramics, viz. ferroelectric, anti-ferroelectric, and piezoelectric materials

  20. Influence of focus of attention, reinvestment and fall history on elderly gait stability

    NARCIS (Netherlands)

    de Melker Worms, Jonathan L.A.; Stins, John F.; van Wegen, Erwin E.H.; Loram, Ian D.; Beek, Peter J.

    2017-01-01

    Falls represent a substantial risk in the elderly. Previous studies have found that a focus on the outcome or effect of the movement (external focus of attention) leads to improved balance performance, whereas a focus on the movement execution itself (internal focus of attention) impairs balance

  1. Progress in engineering high strain lead-free piezoelectric ceramics

    International Nuclear Information System (INIS)

    Leontsev, Serhiy O; Eitel, Richard E

    2010-01-01

    Environmental concerns are strongly driving the need to replace the lead-based piezoelectric materials currently employed as multilayer actuators. The current review describes both compositional and structural engineering approaches to achieve enhanced piezoelectric properties in lead-free materials. The review of the compositional engineering approach focuses on compositional tuning of the properties and phase behavior in three promising families of lead-free perovskite ferroelectrics: the titanate, alkaline niobate and bismuth perovskites and their solid solutions. The 'structural engineering' approaches focus instead on optimization of microstructural features including grain size, grain orientation or texture, ferroelectric domain size and electrical bias field as potential paths to induce large piezoelectric properties in lead-free piezoceramics. It is suggested that a combination of both compositional and novel structural engineering approaches will be required in order to realize viable lead-free alternatives to current lead-based materials for piezoelectric actuator applications. (topical review)

  2. Progress in engineering high strain lead-free piezoelectric ceramics

    Science.gov (United States)

    Leontsev, Serhiy O; Eitel, Richard E

    2010-01-01

    Environmental concerns are strongly driving the need to replace the lead-based piezoelectric materials currently employed as multilayer actuators. The current review describes both compositional and structural engineering approaches to achieve enhanced piezoelectric properties in lead-free materials. The review of the compositional engineering approach focuses on compositional tuning of the properties and phase behavior in three promising families of lead-free perovskite ferroelectrics: the titanate, alkaline niobate and bismuth perovskites and their solid solutions. The ‘structural engineering’ approaches focus instead on optimization of microstructural features including grain size, grain orientation or texture, ferroelectric domain size and electrical bias field as potential paths to induce large piezoelectric properties in lead-free piezoceramics. It is suggested that a combination of both compositional and novel structural engineering approaches will be required in order to realize viable lead-free alternatives to current lead-based materials for piezoelectric actuator applications. PMID:27877343

  3. Current leads for superconducting magnets

    International Nuclear Information System (INIS)

    Ishibashi, Kenji

    1989-01-01

    Current leads for superconducting magnets have been studied since 1960's. The technology of current leads may seem to have been established both in theory and experiment before the middle of 1970's. Nevertheless, a wide variety of superconducting magnets have been introduced in the last 15 years, and the demands for special current leads have increased in accordance to the variety. A steady advance has been made in the design theory and fabrication of current leads. This paper describes the recent current lead technology regarding the design theory, safety in accidents, and high current capability. (author)

  4. Presence of lead in opium.

    Science.gov (United States)

    Aghaee-Afshar, Mahmoud; Khazaeli, Payam; Behnam, Behzad; Rezazadehkermani, Mohammad; Ashraf-Ganjooei, Narges

    2008-09-01

    Opium addiction is a common form of addiction in Middle East countries such as Iran. Recently several reports suggested some kinds of pathologic findings such as abdominal pain, nephropathy, and anemia in opium addict patients. Such pathologic findings suggest lead poisoning in the patients. In this study, the concentration of lead in 10 opium samples was evaluated. The mean concentration of lead in the opium samples was 1.88 ppm. This may explain some of the pathologic findings found in addict patients. The authors would suggest further investigations to evaluate the lead concentration in opium addicts' sera and also routine screening for lead poisoning in opium addict patients.

  5. Neurophysiological effects of lead exposure

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, I.; Wildt, K.; Gullberg, B.; Berlin, M.

    1983-10-01

    A series of neurophysiological variables was measured for men occupationally exposed to lead. The results were related to the degree of lead exposure and to the concentrations of lead and zinc protoporphyrin in blood. A small but significant correlation was observed between lead exposure and motor and sensory conduction velocities in the lower limbs, the conduction velocities of slow motor fibers in the upper limbs, and also sensory nerve action potentials. It is suggested that a neurophysiological examination should be considered in the surveillance of the health of lead workers.

  6. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.

    1994-01-01

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially of planned decommissioning operations. Thus lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for contaminated lead is removing the superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a scaled-off area. The slurry of abrasive and particles of lead falls through a floor and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling

  7. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling

  8. Latino Nursing Leadership: A Leading-Following Perspective.

    Science.gov (United States)

    Ortiz, Mario R

    2017-10-01

    Nurse leaders have many demands that must be attended to in a manner that is focused, so that organizational, professional, and personal visions are moved forward. The focus emerges from the values and beliefs of the nurse leaders. These values and beliefs embrace nursing models and theories that are the foundation from which they lead others.

  9. Involving Lead Users in Innovation

    DEFF Research Database (Denmark)

    Brem, Alexander; Bilgram, Volker; Gutstein, Adele

    2018-01-01

    Research on the lead user method has been conducted for more than thirty years and has shown that the method is more likely to generate breakthrough innovation than traditional market research tools. Based on a systematic literature review, this paper shows a detailed view on the broad variety...... of research on lead user characteristics, lead user processes, lead user identification and application, and success factors. The main challenge of the lead user method as identified in literature is the resource issue regarding time, manpower, and costs. Also, internal acceptance and the processing...... of the method have been spotted in literature, as well as the intellectual property protection issue. From the starting point of the initial lead user method process introduced by Lüthje and Herstatt (2004), results are integrated into a revisited view on the lead user method process. In addition, concrete...

  10. Large-capacity current leads

    International Nuclear Information System (INIS)

    Ballarino, A.

    2008-01-01

    Feeding superconducting magnets with reliable low-loss devices is a key issue for any cryo-electrical system. Conventional or HTS current leads can be used, and cooling methods, materials, and geometries can be chosen to optimize the thermo-electrical performance of the system. The LHC magnets are powered via more than 3000 current leads transporting altogether about 3 MA of current. With thousands of leads, the LHC lead project represents today the largest project of its kind ever undertaken. Following a review of the LHC lead project, an overview of the choices that can be made for the optimization of large capacity current leads is presented. Examples are given of other leads for large scale magnet systems for which the use of HTS is being envisaged

  11. Blood lead and lead-210 origins in residents of Toulouse

    International Nuclear Information System (INIS)

    Servant, J.; Delapart, M.

    1981-01-01

    Blood lead and lead-210 analyses were performed on blood samples from non-smoking residents of Toulouse (city of 400,000 inhabitants). Simultaneous surface soil lead content determinations were carried out by the same procedure on rural zone samples of southwestern France. The observed isotopic ratios were compared in order to evaluate food chain contamination. For an average of 19.7 +- 5.8 μg 100 cc -1 of lead in blood, atmospheric contamination amounts to 20%, estimated as follows: 6% from direct inhalation and 14% from dry deposits on vegetation absorbed as food. The natural levels carried over by the food chain reach 14.9 μg 100 cc -1 and have a 210 Pb/Pb concentration ratio of 0.055 dpmμg -1 . These results lead to a maximum value of 15 μg 100 cc -1 for natural lead in human blood according to the ICRP model. (author)

  12. Assessing Locally Focused Stability Operations

    Science.gov (United States)

    2014-01-01

    interest to other organizations within the Army, as well as to organizations within the Air Force, the Navy, the Marines, and the Intelligence Community...activities that lead to progress in the short term from a military standpoint (e.g., rewarding intelligence sources with food) may be at odds with...the aims and objectives of an aid organization working in the same area (e.g., preventing malnutrition for all), and both may impede the long-term

  13. Lead isotope ratios in artists' lead white: a progress report

    Energy Technology Data Exchange (ETDEWEB)

    Keisch, B; Callahan, R C [Carnegie-Mellon Univ., Pittsburgh, Pa. (USA)

    1976-07-01

    The lead isotope ratios in over four hundred samples of lead white have been determined. The samples represent various geographical sources and dates from the thirteenth century to the present. A new method for organizing this large volume of data is described which helps with the visualization of temporal and geographic patterns. A number of interesting relationships between lead isotope ratio and date or source are shown to exist. Some examples of successful applications of this methodology are described.

  14. Lead isotope ratios in artists' lead white: a progress report

    International Nuclear Information System (INIS)

    Keisch, B.; Callahan, R.C.

    1976-01-01

    The lead isotope ratios in over four hundred samples of lead white have been determined. The samples represent various geographical sources and dates from the thirteenth century to the present. A new method for organizing this large volume of data is described which helps with the visualization of temporal and geographic patterns. A number of interesting relationships between lead isotope ratio and date or source are shown to exist. Some examples of successful applications of this methodology are described. (author)

  15. Plasma focusing in coaxial gun

    International Nuclear Information System (INIS)

    Soliman, H.M.; Masoud, M.M.; El-Khalafawy, T.

    1986-01-01

    A capacitor bank has been discharged between two coaxial electrodes of 6.6 cm outer diameter, 3.2 cm inner diameter and length of 31.5 cm. filled with hydrogen gas at pressure of 310 μHg. Results show that, the axial and radial plasma current reach a maximum value at a position adjacent to the gun muzzle, at which the plasma focus occurs. The measurement of the electron temperature and density and azimuthal electric field along the axis of the expansion chamber, gives a maximum value at z∼18 cm from the gun muzzle, while the axial plasma current and velocity has a minimum value at that position. These results indicate that a second point of a plasma focus has been formed at z∼18 cm from the gun muzzle, along the axis of the expansion chamber

  16. Focusing Telescopes in Nuclear Astrophysics

    CERN Document Server

    Ballmoos, Peter von

    2007-01-01

    This volume is the first of its kind on focusing gamma-ray telescopes. Forty-eight refereed papers provide a comprehensive overview of the scientific potential and technical challenges of this nascent tool for nuclear astrophysics. The book features articles dealing with pivotal technologies such as grazing incident mirrors, multilayer coatings, Laue- and Fresnel-lenses - and even an optic using the curvature of space-time. The volume also presents an overview of detectors matching the ambitious objectives of gamma ray optics, and facilities for operating such systems on the ground and in space. The extraordinary scientific potential of focusing gamma-ray telescopes for the study of the most powerful sources and the most violent events in the Universe is emphasized in a series of introductory articles. Practicing professionals, and students interested in experimental high-energy astrophysics, will find this book a useful reference

  17. Reflectors to Focus Wave Energy

    DEFF Research Database (Denmark)

    Kramer, Morten; Frigaard, Peter

    2005-01-01

    Wave Energy Converters (WEC’s) extract wave energy from a limited area, often a single point or line even though the wave energy is generally spread out along the wave crest. By the use of wave reflectors (reflecting walls) the wave energy is effectively focused and increased by approximately 30......-50%. Clearly longer wave reflectors will focus more wave energy than shorter wave reflectors. Thus the draw back is the increased wave forces for the longer wave reflectors. In the paper a procedure for calculating the energy efficiency and the wave forces on the reflectors are described, this by use of a 3D...... boundary element method. The calculations are verified by laboratory experiments and a very good agreement is found. The paper gives estimates of possible power benefit for different wave reflector geometries and optimal geometrical design parameters are specified. On this basis inventors of WEC’s can...

  18. Ion beam generation and focusing

    International Nuclear Information System (INIS)

    Miller, P.A.; Mendel, C.W.; Swain, D.W.; Goldstein, S.A.

    1975-01-01

    Calculations have shown that efficiently generated and focused ion beams could have significant advantages over electron beams in achieving ignition of inertially-confined thermonuclear fuel. Efficient ion beam generation implies use of a good ion source and suppression of net electron current. Net electron flow can be reduced by allowing electrons to reflex through a highly transparent anode or by use of transverse magnetic fields (either beam self-fields or externally applied fields). Geometric focusing can be achieved if the beam is generated by appropriately shaped electrodes. Experimental results are presented which demonstrate ion beam generation in both reflexing and pinched-flow diodes. Spherically shaped electrodes are used to concentrate a proton beam, and target response to proton deposition is studied

  19. Plasma-focused cyclic accelerators

    International Nuclear Information System (INIS)

    Mondelli, A.A.; Chernin, D.P.

    1985-01-01

    The use of ambient plasma to neutralize the transverse forces of an intense particle beam has been known for many years. Most recently, the so-called ion-focused regime (IFR) for beam propagation has been used as a means of focusing intense electron beams in linear accelerators and suggested for injecting an electron beam across magnetic field lines into a high-current cyclic accelerator. One technique for generating the required background plasma for IFR propagation is to use a laser to ionize ambient gas in the accelerator chamber. This paper discusses an alternative means of plasma production for IFR, viz. by using RF breakdown. For this approach the accelerator chamber acts as a waveguide. This technique is not limited to toroidal accelerators. It may be applied to any accelerator or recirculator geometry as well as for beam steering and for injection or extraction of beams in closed accelerator configurations

  20. Optimum Design of Plasma Focus

    International Nuclear Information System (INIS)

    Ramos, Ruben; Gonzalez, Jose; Clausse, Alejandro

    2000-01-01

    The optimum design of Plasma Focus devices is presented based in a lumped parameter model of the MHD equations.Maps in the design parameters space are obtained, which determine the length and deuterium pressure required to produce a given neutron yield.Sensitivity analyses of the main effective numbers (sweeping efficiencies) was performed, and lately the optimum values were determined in order to set a basis for the conceptual design

  1. Focus On Photoshop Elements Focus on the Fundamentals

    CERN Document Server

    Asch, David

    2011-01-01

    Are you bewildered by the advanced editing options available in Photoshop Elements? Do you want to get the most out of your image without going bleary-eyed in front of a computer screen? This handy guide will explain the ins and outs of using Photoshop Elements, without having to spend hours staring at the screen. Using a fabulous combination of easy-to-follow advice and step-by-step instructions, Focus On Photoshop Elements gives great advice on setting up, storing and sharing your image library and teaches you the basics of RAW image processing and color correction, plus shows you how to edi

  2. Focusing of Shear Shock Waves

    Science.gov (United States)

    Giammarinaro, Bruno; Espíndola, David; Coulouvrat, François; Pinton, Gianmarco

    2018-01-01

    Focusing is a ubiquitous way to transform waves. Recently, a new type of shock wave has been observed experimentally with high-frame-rate ultrasound: shear shock waves in soft solids. These strongly nonlinear waves are characterized by a high Mach number, because the shear wave velocity is much slower, by 3 orders of magnitude, than the longitudinal wave velocity. Furthermore, these waves have a unique cubic nonlinearity which generates only odd harmonics. Unlike longitudinal waves for which only compressional shocks are possible, shear waves exhibit cubic nonlinearities which can generate positive and negative shocks. Here we present the experimental observation of shear shock wave focusing, generated by the vertical motion of a solid cylinder section embedded in a soft gelatin-graphite phantom to induce linearly vertically polarized motion. Raw ultrasound data from high-frame-rate (7692 images per second) acquisitions in combination with algorithms that are tuned to detect small displacements (approximately 1 μ m ) are used to generate quantitative movies of gel motion. The features of shear shock wave focusing are analyzed by comparing experimental observations with numerical simulations of a retarded-time elastodynamic equation with cubic nonlinearities and empirical attenuation laws for soft solids.

  3. High efficiency focus neutron generator

    Science.gov (United States)

    Sadeghi, H.; Amrollahi, R.; Zare, M.; Fazelpour, S.

    2017-12-01

    In the present paper, the new idea to increase the neutron yield of plasma focus devices is investigated and the results are presented. Based on many studies, more than 90% of neutrons in plasma focus devices were produced by beam target interactions and only 10% of them were due to thermonuclear reactions. While propounding the new idea, the number of collisions between deuteron ions and deuterium gas atoms were increased remarkably well. The COMSOL Multiphysics 5.2 was used to study the given idea in the known 28 plasma focus devices. In this circumstance, the neutron yield of this system was also obtained and reported. Finally, it was found that in the ENEA device with 1 Hz working frequency, 1.1 × 109 and 1.1 × 1011 neutrons per second were produced by D-D and D-T reactions, respectively. In addition, in the NX2 device with 16 Hz working frequency, 1.34 × 1010 and 1.34 × 1012 neutrons per second were produced by D-D and D-T reactions, respectively. The results show that with regards to the sizes and energy of these devices, they can be used as the efficient neutron generators.

  4. Focus group report - part II

    International Nuclear Information System (INIS)

    1997-12-01

    The Waste Policy Institute, through a cooperative agreement with the U.S. Department of Energy (DOE) Office of Science and Technology (OST) conducted a focus group with members of the Hanford Advisory Board (HAB), interviews with tribal government representatives, and a survey of Oak Ridge Local Oversight Committee (LOC) and Site Specific Advisory Board (SSAB) members. The purpose was to understand what members of the interested and involved public want to know about technology development and ways to get that information to them. These data collection activities were used as a follow-up to two previously held focus groups with the general public near Idaho National Engineering and Environmental Laboratory (INEEL) and the Savannah River Site (SRS). Most participants from the first two focus groups said they did not have time and/or were not interested in participating in technology decision-making. They said they would prefer to defer to members of their communities who are interested and want to be involved in technology decision-making

  5. Letting Students Take the Lead: A User-Centred Approach to Evaluating Subject Guides

    Directory of Open Access Journals (Sweden)

    Kimberley Hintz

    2010-12-01

    Full Text Available Objective – What do students need and want from library subject guides? Options such as Web 2.0 enhancement are now available to librarians creating subject-specific web pages. Librarians may be eager to implement these new tools, but are such add-ons a priority forstudents? This paper aims to start a dialogue on this issue by presenting the findings of the University of British Columbia (UBC Library’s Subject Guides Working Group (SGWG, which was tasked with assessing current library subject guides in order to make recommendations for the update and future development of UBC Library subject guides.Methods – The working group solicited feedback through a questionnaire that was distributed to undergraduate and graduate students from a variety of disciplines at UBC. The questionnaire included an evaluation of UBC subject guides, as well as guides from other academic libraries that used various platforms such as LibGuides and SubjectsPlus.Results – Respondents to the student questionnaire indicated that a simple and clean layout was of primary importance. Students also desired succinct annotations to resources and limited page scrolling. Meanwhile, few students identified Web 2.0 features such as rating systems and discussion forums as being important for their needs. The working group used the questionnaire data to create a “Top Ten” list of student recommendations.Conclusions – The “Top Ten” list of student recommendations was combined with stakeholder feedback from faculty, liaison librarians and Library Systems and Information Technology representatives to create the SGWG’s final recommendation for subject guide revision and enhancement. For the SGWG these findings called into question the necessity of Web 2.0 technologies within subject guide pages and highlighted the need for further research on the topic of subject guide usability and effectiveness.

  6. Superconducting magnets and leads thereto

    International Nuclear Information System (INIS)

    Biltcliffe, M.N.; Hanley, P.E.; McKinnon, J.B.; Wheatley, R.W.

    1975-01-01

    The magnet described comprises a cryostat containing a superconducting coil for the generation of a magnetic field, with a short-circuiting superconducting link connected across the coil, and electrical leads extending through the cryostat to the coil; these leads are provided with joints within the cryostat to enable them to be detached from the coil and removed from the cryostat without interrupting the current through the coil, thus reducing heat conduction to the cryostat through the leads. The joints are arranged so that the leads can be readily detached and re-attached to the coil from outside the cryostat. Gas-tight seals are provided where the leads pass through the outer wall of the cryostat, with caps that can be secured after removal of the leads. This kind of magnet can provide a stable magnetic field continuously over long periods, such as is required in nuclear magnetic resonance spectrometers. (U.K.)

  7. Taking the Lead : Gender, Social Context and Preference to Lead

    NARCIS (Netherlands)

    Hong, A.P.C.I.; Schaafsma, J.; van der Wijst, P.J.

    2014-01-01

    Previous research has demonstrated that women tend to emerge as leaders less often than men. In the present study, we examined to what extent women's and men's preference to lead is influenced by social context. It was hypothesized that women have a less strong preference to lead than men in a

  8. Skin toxicology of lead species evaluated by their permeability and proteomic profiles: a comparison of organic and inorganic lead.

    Science.gov (United States)

    Pan, Tai-Long; Wang, Pei-Wen; Al-Suwayeh, Saleh A; Chen, Chih-Chieh; Fang, Jia-You

    2010-08-01

    Lead compounds are known to cause cytotoxicity and genotoxicity. Lead absorption by the skin is an important route through which this metal enters the body. The purpose of this work was to evaluate the skin permeability and toxicological profiles of two lead species, lead acetate and lead nitrate. This study assessed lead-induced toxicity mechanisms by focusing on the histopathology, proteomics, cell growth, and cellular ATP. In vitro skin permeation assays showed that there was no significant difference of lead accumulation within and across the skin between the two lead species. The presence of simulated sweat reduced the skin uptake of lead. The skin deposition of lead acetate was greater than that of lead nitrate with in vivo topical application. On the other hand, lead nitrate produced greater changes in the skin's histology and proteomic profiles compared to lead acetate. Four protein spots which showed significant changes were identified and are discussed in this study. These included glucose-related protein precursor (GRP) 78, K14, alpha-actin, and Rho GDP-dissociation inhibitor 2 (RhoGDI2). These proteins are respectively associated with oxidative stress, apoptosis, wound healing, and proliferation. Lead presented a biphasic pattern on cell growth and intracellular ATP content, with a stimulating effect at low concentrations and an inhibitory effect on cell proliferation at higher concentrations. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

  9. Spent lead-acid battery recycling in China - A review and sustainable analyses on mass flow of lead.

    Science.gov (United States)

    Sun, Zhi; Cao, Hongbin; Zhang, Xihua; Lin, Xiao; Zheng, Wenwen; Cao, Guoqing; Sun, Yong; Zhang, Yi

    2017-06-01

    Lead is classified to be one of the top heavy metal pollutants in China. The corresponding environmental issues especially during the management of spent lead-acid battery have already caused significant public awareness and concern. This research gives a brief overview on the recycling situation based on an investigation of the lead industry in China and also the development of technologies for spent lead-acid batteries. The main principles and research focuses of different technologies including pyrometallurgy, hydrometallurgy and greener technologies are summarized and compared. Subsequently, the circulability of lead based on the entire life cycle analyses of lead-acid battery is calculated. By considering different recycling schemes, the recycling situation of spent lead-acid battery in China can be understood semi-quantitatively. According to this research, 30% of the primary lead production can be shut down that the lead production can still ensure consecutive life cycle operation of lead-acid battery, if proper management of the spent lead-acid battery is implemented according to current lead industry situation in China. This research provides a methodology on the view of lead circulability in the whole life cycle of a specific product and is aiming to contribute more quantitative guidelines for efficient organization of lead industry in China. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Archives of Atmospheric Lead Pollution

    Science.gov (United States)

    Weiss, Dominik; Shotyk, William; Kempf, Oliver

    Environmental archives such as peat bogs, sediments, corals, trees, polar ice, plant material from herbarium collections, and human tissue material have greatly helped to assess both ancient and recent atmospheric lead deposition and its sources on a regional and global scale. In Europe detectable atmospheric lead pollution began as early as 6000years ago due to enhanced soil dust and agricultural activities, as studies of peat bogs reveal. Increased lead emissions during ancient Greek and Roman times have been recorded and identified in many long-term archives such as lake sediments in Sweden, ice cores in Greenland, and peat bogs in Spain, Switzerland, the United Kingdom, and the Netherlands. For the period since the Industrial Revolution, other archives such as corals, trees, and herbarium collections provide similar chronologies of atmospheric lead pollution, with periods of enhanced lead deposition occurring at the turn of the century and since 1950. The main sources have been industry, including coal burning, ferrous and nonferrous smelting, and open waste incineration until c.1950 and leaded gasoline use since 1950. The greatest lead emissions to the atmosphere all over Europe occurred between 1950 and 1980 due to traffic exhaust. A marked drop in atmospheric lead fluxes found in most archives since the 1980s has been attributed to the phasing out of leaded gasoline. The isotope ratios of lead in the various archives show qualitatively similar temporal changes, for example, the immediate response to the introduction and phasing out of leaded gasoline. Isotope studies largely confirm source assessments based on lead emission inventories and allow the contributions of various anthropogenic sources to be calculated.

  11. Safe leads and lead changes in competitive team sports

    Science.gov (United States)

    Clauset, A.; Kogan, M.; Redner, S.

    2015-06-01

    We investigate the time evolution of lead changes within individual games of competitive team sports. Exploiting ideas from the theory of random walks, the number of lead changes within a single game follows a Gaussian distribution. We show that the probability that the last lead change and the time of the largest lead size are governed by the same arcsine law, a bimodal distribution that diverges at the start and at the end of the game. We also determine the probability that a given lead is "safe" as a function of its size L and game time t . Our predictions generally agree with comprehensive data on more than 1.25 million scoring events in roughly 40 000 games across four professional or semiprofessional team sports, and are more accurate than popular heuristics currently used in sports analytics.

  12. An elastic, low-background vertical focusing element for a doubly focusing neutron monochromator

    International Nuclear Information System (INIS)

    Smee, Stephen A.; Brand, Paul C.; Barry, Dwight D.; Broholm, Collin L.; Anand, Dave K.

    2001-01-01

    A novel, variable radius of curvature, device for the focusing of neutrons is presented. This elastic element consists of a thin variable thickness, constant width, aluminum blade to which diffracting crystals can be attached. When buckled, the blade assumes a circular focal shape, the radius of which is easily controlled by the relative displacement of supporting pivots. Precision electromechanical and optical measurements show that the slope of the buckled blade conforms to a circular arc to within 0.15 degree sign for radii in the range 900 mm< R<10 000 mm. This easily scalable, low mass mechanism is well suited for use in a focusing neutron monochromator, as the parasitic scattering typically associated with traditional lead screw and lever mechanisms is greatly reduced

  13. The quest for customer focus.

    Science.gov (United States)

    Gulati, Ranjay; Oldroyd, James B

    2005-04-01

    Companies have poured enormous amounts of money into customer relationship management, but in many cases the investment hasn't really paid off. That's because getting closer to customers isn't about building an information technology system. It's a learning journey-one that unfolds over four stages, requiring people and business units to coordinate in progressively more sophisticated ways. The journey begins with the creation of a companywide repository containing each interaction a customer has with the company, organized not by product, purchase, or location, but by customer. Communal coordination is what's called for at this stage, as each group contributes its information to the data pool separately from the others and then taps into it as needed. In the second stage, one-way serial coordination from centralized IT through analytical units and out to the operating units allows companies to go beyond just assembling data to drawing inferences. In stage three, companies shift their focus from past relationships to future behavior. Through symbiotic coordination, information flows back and forth between central analytic units and various organizational units like marketing, sales, and operations, as together they seek answers to questions like "How can we prevent customers from switching to a competitor?" and "Who would be most likely to buy a new product in the future"? In stage four, firms begin to move past discrete, formal initiatives and, through integral coordination, bring an increasingly sophisticated understanding oftheir customers to bear in all day-to-day operations. Skipping stages denies organizations the sure foundation they need to build a lasting customer-focused mind-set. Those that recognize this will invest their customer relationship dollars much more wisely-and will see their customer-focusing efforts pay offon the bottom line.

  14. Decontaminating lead bricks and shielding

    International Nuclear Information System (INIS)

    Lussiez, G.W.

    1993-01-01

    Lead used for shielding is often surface contaminated with radionuclides and is therefore a Resource Conservation and Recovery Act (RCRA) D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Lab. decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 100 metric tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 280 kPa (40 psig) rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a pump. A pump sends the slurry mixture back to the spray gun, creating a continuous process

  15. Neurological aspects of lead intoxication

    Energy Technology Data Exchange (ETDEWEB)

    Lehner, H

    1980-05-08

    This study gives a survey over the medical and scientific literature on lead intoxications, which were published until 1979. Neurologic aspects are of particular interest. At present dramatic cases of lead intoxications occur only rarely. However, there are numerous studies about cases of chronical, partly subclinical intoxications. This chronical type of lead intoxication can become manifest clinically as relatively vague symptoms, for example vertigos, insomnia, headaches and weakness. Contrary to this, serious encephalopathies, even with fatal outcome, and polyneuropathies with typical paresis of the radial nerve are preferably observed in acute lead intoxications. Besides the numerous sources of intoxication, also the different opinions found in literature are discussed, concerning the effects of lead on the human body. The fact that there are differing opinions about the limiting value of the blood-lead level at which intoxication symptoms have to be expected, becomes apparent when the determined blood-lead level values are compared and evaluated. Besides the description of general intoxication effects, the discussion of the neurologic aspects found in literature - not only those concerning the central, but also the peripheral system - are preferably concerned. Reports about neuropsychical alterations due to lead exposure, which are mainly found in children, supplement the numerous descriptions of the macroscopic and microscopic alterations of the nervous system provoked by lead. Finally the therapeutic and prophylactic measures given in the literature are discussed.

  16. Lead (Environmental Health Student Portal)

    Science.gov (United States)

    ... Air Pollution Home Indoor Air Pollution Outdoor Air Pollution Particulate Matter Ozone Chemicals Chemicals Home Mercury Lead Arsenic Volatile Organic Compounds Plastics Pesticides Climate Change ...

  17. Erythrocyte fluorescence and lead intoxication.

    Science.gov (United States)

    Clark, K G

    1976-01-01

    Blood samples from people exposed to inorganic lead were examined by fluorescence microscopy for excess erythrocyte porphyrin. With continued lead absorption, fluorescent erythrocytes appeared in the circulation of workers handling this metal or its compounds, and they progressively increased in number and brilliance. These changes ensued if the blood lead concentration was maintained above 2-42 mumol/l (50 mug/100 ml), and preceded any material fall in the haemoglobin value. At one factory, 62-5% of 81 symptomless workers showed erythrocyte fluorescence attributable to the toxic effects of lead. Excess fluorocytes were found in blood samples from a child with pica and three of her eight siblings. These four were subsequently shown to have slightly increased blood lead concentrations (2-03 to 2-32 mumol/l). Fluorescence microscopy for excess erythrocyte porphyrin is a sensitive method for the detection of chronic lead intoxication. A relatively slight increase in the blood lead is associated with demonstrabel changes in erythrocyte porphyrin content. The procedure requires little blood, and may be performed upon stored samples collected for lead estimation. The results are not readily influenced by contamination, and provide good confirmatory evidence for the absorption of biochemically active lead. PMID:963005

  18. Enhanced Leads and Appointment System

    Data.gov (United States)

    Social Security Administration — The data asset contains information on current or upcoming appointments, individuals who will be attending the appointment, potential intent to file a claim (lead),...

  19. Lead Poisoning in Wild Birds

    Science.gov (United States)

    Lahner, Lesanna L.; Franson, J. Christian

    2009-01-01

    Lead in its various forms has been used for thousands of years, originally in cooking utensils and glazes and more recently in many industrial and commercial applications. However, lead is a potent, potentially deadly toxin that damages many organs in the body and can affect all animals, including humans. By the mid 1990s, lead had been removed from many products in the United States, such as paint and fuel, but it is still commonly used in ammunition for hunting upland game birds, small mammals, and large game animals, as well as in fishing tackle. Wild birds, such as mourning doves, bald eagles, California condors, and loons, can die from the ingestion of one lead shot, bullet fragment, or sinker. According to a recent study on loon mortality, nearly half of adult loons found sick or dead during the breeding season in New England were diagnosed with confirmed or suspected lead poisoning from ingestion of lead fishing weights. Recent regulations in some states have restricted the use of lead ammunition on certain upland game hunting areas, as well as lead fishing tackle in areas frequented by common loons and trumpeter swans. A variety of alternatives to lead are available for use in hunting, shooting sports, and fishing activities.

  20. A focused bibliography on robotics

    Science.gov (United States)

    Mergler, H. W.

    1983-08-01

    The present bibliography focuses on eight robotics-related topics believed by the author to be of special interest to researchers in the field of industrial electronics: robots, sensors, kinematics, dynamics, control systems, actuators, vision, economics, and robot applications. This literature search was conducted through the 1970-present COMPENDEX data base, which provides world-wide coverage of nearly 3500 journals, conference proceedings and reports, and the 1969-1981 INSPEC data base, which is the largest for the English language in the fields of physics, electrotechnology, computers, and control.

  1. Focus on topological quantum computation

    International Nuclear Information System (INIS)

    Pachos, Jiannis K; Simon, Steven H

    2014-01-01

    Topological quantum computation started as a niche area of research aimed at employing particles with exotic statistics, called anyons, for performing quantum computation. Soon it evolved to include a wide variety of disciplines. Advances in the understanding of anyon properties inspired new quantum algorithms and helped in the characterization of topological phases of matter and their experimental realization. The conceptual appeal of topological systems as well as their promise for building fault-tolerant quantum technologies fuelled the fascination in this field. This ‘focus on’ collection brings together several of the latest developments in the field and facilitates the synergy between different approaches. (editorial)

  2. Focus on astronomical predictable events

    DEFF Research Database (Denmark)

    Jacobsen, Aase Roland

    2006-01-01

    At the Steno Museum Planetarium we have for many occasions used a countdown clock to get focus om astronomical events. A countdown clock can provide actuality to predictable events, for example The Venus Transit, Opportunity landing on Mars and The Solar Eclipse. The movement of the clock attracs...... the public and makes a point of interest in a small exhibit area. A countdown clock can be simple, but it is possible to expand the concept to an eye-catching part of a museum....

  3. Catastrophe in plasma focus evolution

    International Nuclear Information System (INIS)

    Ikuta, Kazunari.

    1984-07-01

    A theory of generating strong electric field in a dense plasma column in plasma focus is established by applying the formula for the electron thermal conductivity in destroyed magnetic surfaces like those in tokamaks. The origin of the electric field may be from abrupt rise of plasma resistivity when the irregularity of magnetic field is weak. However, the electric field can be from the inductive origin in case the irregularity attains a certain level. Both origin should be mixed up depending on the magnitude of the irregularity. (author)

  4. Final focus system for TLC

    International Nuclear Information System (INIS)

    Oide, K.

    1988-11-01

    A limit of the chromaticity correction for the final focus system of a TeV Linear Collider (TLC) is investigated. As the result, it becomes possible to increase the aperture of the final doublet with a small increase of the horizontal β function. The new optics design uses a final doublet of 0.5 mm half-aperture and 1.4 T pole-tip field. The length of the system is reduced from 400 m to 200 m by several optics changes. Tolerances for various machine errors with this optics are also studied. 5 refs., 7 figs., 2 tabs

  5. In vivo x-ray fluorescence of bone lead in the study of human lead metabolism: Serum lead, whole blood lead, bone lead, and cumulative exposure

    International Nuclear Information System (INIS)

    Cake, K.M.; Chettle, D.R.; Webber, C.E.; Gordon, C.L.

    1995-01-01

    Traditionally, clinical studies of lead's effect on health have relied on blood lead levels to indicate lead exposure. However, this is unsatisfactory because blood lead levels have a half-life of approximately 5 weeks, and thus reflect recent exposure. Over 90% of the lead body burden is in bone, and it is thought to have a long residence time, thus implying that measurements of bone lead reflect cumulative exposure. So, measurements of bone lead are useful in understanding the long-term health effects of lead. Ahlgren reported the first noninvasive measurements of bone lead in humans, where γ-rays from 57 Co were used to excite the K series x-rays of lead. The lead detection system at McMaster University uses a 109 Cd source which is positioned at the center of the detector face (HPGe) and a near backscatter (∼160 degrees) geometry. This arrangement allows great flexibility, since one can sample lead in a range of different bone sites due to a robust normalization technique which eliminates the need to correct for bone geometry, thickness of overlying tissue, and other related factors. The effective radiation dose to an adult during an x-ray fluorescence bone lead measurement is extremely low, being 35 nSv. This paper addresses the issue of how bone, whole blood, and serum lead concentrations can be related in order to understand a person's lead exposure history

  6. Tanks focus area. Annual report 1997

    International Nuclear Information System (INIS)

    Frey, J.

    1997-01-01

    The U.S. Department of Energy Office of Environmental Management is tasked with a major remediation project to treat and dispose of radioactive waste in hundreds of underground storage tanks. These tanks contain about 90,000,000 gallons of high-level and transuranic wastes. We have 68 known or assumed leaking tanks, that have allowed waste to migrate into the soil surrounding the tank. In some cases, the tank contents have reacted to form flammable gases, introducing additional safety risks. These tanks must be maintained in the safest possible condition until their eventual remediation to reduce the risk of waste migration and exposure to workers, the public, and the environment. Science and technology development for safer, more efficient, and cost-effective waste treatment methods will speed up progress toward the final remediation of these tanks. The DOE Office of Environmental Management established the Tanks Focus Area to serve as the DOE-EM's technology development program for radioactive waste tank remediation in partnership with the Offices of Waste Management and Environmental Restoration. The Tanks Focus Area is responsible for leading, coordinating, and facilitating science and technology development to support remediation at DOE's four major tank sites: the Hanford Site in Washington State, Idaho National Engineering and Environmental Laboratory in Idaho, Oak Ridge Reservation in Tennessee, and the Savannah River Site in South Carolina. The technical scope covers the major functions that comprise a complete tank remediation system: waste retrieval, waste pretreatment, waste immobilization, tank closure, and characterization of both the waste and tank. Safety is integrated across all the functions and is a key component of the Tanks Focus Area program

  7. The combination of electrospray and flow focusing

    Science.gov (United States)

    Gañán-Calvo, Alfonso M.; López-Herrera, José M.; Riesco-Chueca, Pascual

    2006-11-01

    An ultra-fine liquid atomization procedure combining the advantages of electrospray and flow focusing is presented. Both techniques are known to produce strikingly small and steady liquid micro-jets issuing from menisci held by capillary forces. Such menisci take the form of a cusp-like drop attached to the feeding tube (flow focusing: FF) or a Taylor cone (electrospray: ES). The issuing micro-jets are forced or ‘sucked’ from the parent meniscus either by pressure or electrohydrodynamic forces. Subsequent capillary breakup of the jet leads to fine sprays of remarkable quality. Here we describe the joint effect of pressurization and electrification in a flow focusing device, and the subsequent coupling of both ES and FF phenomena. For any given liquid and flow rate, the combined procedure gives rise to significantly smaller droplet sizes than observed in any of the source techniques. The co-flowing gas stream removes space charges; in addition, the perforated plate facing the feed tube provides an electric barrier, shielding the jet-meniscus or ‘production’ area from the spray or ‘product’ area. As a result, space charges and electrified droplets are removed from the production area, thus avoiding the ambient electric saturation which becomes a limiting factor in ES-spraying: a significantly enhanced spraying stability ensues, with a much wider operation range than FF or ES. Other unexpected outcomes from the combination are also shown. A theoretical model is developed to predict the emitted droplet size: a first integral of the momentum equation yielding a generalized Bernoulli equation, and an explicit approximation for the jet diameter and droplet size, accurate within a broad parametrical band.

  8. Focus on the Rashba effect

    Science.gov (United States)

    Bihlmayer, G.; Rader, O.; Winkler, R.

    2015-05-01

    The Rashba effect, discovered in 1959, continues to supply fertile ground for fundamental research and applications. It provided the basis for the proposal of the spin transistor by Datta and Das in 1990, which has largely inspired the broad and dynamic field of spintronics. More recent developments include new materials for the Rashba effect such as metal surfaces, interfaces and bulk materials. It has also given rise to new phenomena such as spin currents and the spin Hall effect, including its quantized version, which has led to the very active field of topological insulators. The Rashba effect plays a crucial role in yet more exotic fields of physics such as the search for Majorana fermions at semiconductor-superconductor interfaces and the interaction of ultracold atomic Bose and Fermi gases. Advances in our understanding of Rashba-type spin-orbit couplings, both qualitatively and quantitatively, can be obtained in many different ways. This focus issue brings together the wide range of research activities on Rashba physics to further promote the development of our physical pictures and concepts in this field. The present Editorial gives a brief account on the history of the Rashba effect including material that was previously not easily accessible before summarizing the key results of the present focus issue as a guidance to the reader.

  9. Plutonium focus area. Technology summary

    International Nuclear Information System (INIS)

    1997-09-01

    The Assistant Secretary for the Office of Environmental Management (EM) at the U.S. Department of Energy (DOE) chartered the Plutonium Focus Area (PFA) in October 1995. The PFA open-quotes...provides for peer and technical reviews of research and development in plutonium stabilization activities...close quotes In addition, the PFA identifies and develops relevant research and technology. The purpose of this document is to focus attention on the requirements used to develop research and technology for stabilization, storage, and preparation for disposition of nuclear materials. The PFA Technology Summary presents the approach the PFA uses to identify, recommend, and review research. It lists research requirements, research being conducted, and gaps where research is needed. It also summarizes research performed by the PFA in the traditional research summary format. This document encourages researchers and commercial enterprises to do business with PFA by submitting research proposals or open-quotes white papers.close quotes In addition, it suggests ways to increase the likelihood that PFA will recommend proposed research to the Nuclear Materials Stabilization Task Group (NMSTG) of DOE

  10. Plasma-focused cyclic accelerators

    International Nuclear Information System (INIS)

    Mondelli, A.A.; Chernin, D.P.

    1985-01-01

    The use of ambient plasma to neutralize the transverse forces of an intense particle beam has been known for many years. Most recently, the so-called ion-focused regime (IFR) for beam propagation has been used as a means of focusing intense electron beams in linear accelerators and suggested for injecting an electron beam across magnetic field lines into a high-current cyclic accelerator. One technique for generating the required background plasma for IFR propagation is to use a laser to ionize ambient gas in the accelerator chamber. For cyclic accelerators a technique is required for carrying the plasma channel and the beam around a bend. Multiple laser-generated channels with dipole magnetic fields to switch the beam from one channel to the next have been tested at Sandia. This paper discusses an alternative means of plasma production for IFR, viz. by using rf breakdown. For this approach the accelerator chamber acts as a waveguide. With a suitable driving frequency, a waveguide mode can be driven which has its peak field intensity on the axis with negligible fields at the chamber walls. The plasma production and hence the beam propagation is thereby isolated from the walls. This technique is not limited to toroidal accelerators. It may be applied to any accelerator or recirculator geometry as well as for beam steering and for injection or extraction of beams in closed accelerator configurations

  11. Discrete and modal focusing effects: principles and applications

    International Nuclear Information System (INIS)

    Stamate, E

    2012-01-01

    Charge flux distribution on the surface of biased electrodes of different geometries immersed in a plasma is investigated by three-dimensional simulations and experiments. It is demonstrated that the sheath surrounding the electrodes that interface insulators acts as an electrostatic lens, focusing the charges to distinct locations on the electrode surface depending on the entrance coordinates at the sheath edge. Two focusing effects are identified. Discrete focusing leads to the formation of a passive surface of no ion impact, near the edge of the electrodes interfacing insulators. Modal focusing results in the formation of certain ‘modal spots’ and/or ‘modal lines’. Several phenomenological aspects and potential applications are reviewed and further discussed, including charge focusing by a three-dimensional plasma–sheath–lens, ion dose uniformity during plasma immersion ion implantation, mass spectrometry and plasma monitoring. (paper)

  12. Discrete and modal focusing effects: principles and applications

    DEFF Research Database (Denmark)

    Stamate, Eugen

    2012-01-01

    Charge flux distribution on the surface of biased electrodes of different geometries immersed in a plasma is investigated by three-dimensional simulations and experiments. It is demonstrated that the sheath surrounding the electrodes that interface insulators acts as an electrostatic lens, focusing...... the charges to distinct locations on the electrode surface depending on the entrance coordinates at the sheath edge. Two focusing effects are identified. Discrete focusing leads to the formation of a passive surface of no ion impact, near the edge of the electrodes interfacing insulators. Modal focusing...... results in the formation of certain ‘modal spots’ and/or ‘modal lines’. Several phenomenological aspects and potential applications are reviewed and further discussed, including charge focusing by a three-dimensional plasma–sheath–lens, ion dose uniformity during plasma immersion ion implantation, mass...

  13. Leading change: a concept analysis.

    Science.gov (United States)

    Nelson-Brantley, Heather V; Ford, Debra J

    2017-04-01

    To report an analysis of the concept of leading change. Nurses have been called to lead change to advance the health of individuals, populations, and systems. Conceptual clarity about leading change in the context of nursing and healthcare systems provides an empirical direction for future research and theory development that can advance the science of leadership studies in nursing. Concept analysis. CINAHL, PubMed, PsycINFO, Psychology and Behavioral Sciences Collection, Health Business Elite and Business Source Premier databases were searched using the terms: leading change, transformation, reform, leadership and change. Literature published in English from 2001 - 2015 in the fields of nursing, medicine, organizational studies, business, education, psychology or sociology were included. Walker and Avant's method was used to identify descriptions, antecedents, consequences and empirical referents of the concept. Model, related and contrary cases were developed. Five defining attributes of leading change were identified: (a) individual and collective leadership; (b) operational support; (c) fostering relationships; (d) organizational learning; and (e) balance. Antecedents were external or internal driving forces and organizational readiness. The consequences of leading change included improved organizational performance and outcomes and new organizational culture and values. A theoretical definition and conceptual model of leading change were developed. Future studies that use and test the model may contribute to the refinement of a middle-range theory to advance nursing leadership research and education. From this, empirically derived interventions that prepare and enable nurses to lead change to advance health may be realized. © 2016 John Wiley & Sons Ltd.

  14. Lead poisoning from souvenir earthenware.

    Science.gov (United States)

    Hellström-Lindberg, Eva; Björklund, Andreas; Karlson-Stiber, Christine; Harper, Pauline; Seldén, Anders I

    2006-02-01

    A case of massive lead poisoning from juice contained in a Greek earthenware jug as well as six satellite cases of high lead exposure of similar origin is reported. The intoxicated patient was successfully treated with dimercaptosuccinic acid. Ceramic producers should adhere to the longstanding European legislation.

  15. Lead-free primary explosives

    Science.gov (United States)

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  16. Blood Test: Lead (For Parents)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Lead KidsHealth / For Parents / Blood Test: Lead What's ... español Análisis de sangre: plomo What Is a Blood Test? A blood test is when a sample of ...

  17. Leading a Recovery-oriented Social Enterprise.

    Science.gov (United States)

    Raeburn, Toby; Hungerford, Catherine; Sayers, Jan; Escott, Phil; Lopez, Violeta; Cleary, Michelle

    2015-05-01

    Recovery-oriented mental health services promote the principles of recovery, such as hope and optimism, and are characterized by a personalized approach to developing consumer self-determination. Nurse leaders are increasingly developing such services as social enterprises, but there is limited research on the leadership of these programs. Leading a recovery-oriented mental health nurse social enterprise requires visionary leadership, collaboration with consumers and local health providers, financial viability, and commitment to recovery-focused practice. This article describes the framework of an Australian mental health nursing social enterprise, including the service attributes and leadership lessons that have been learned from developing program sustainability.

  18. Leading change: 1--identifying the issue.

    Science.gov (United States)

    Kerridge, Joanna

    To enable sustainable change, nurses need to take the lead in managing it. Recent national initiatives have emphasised the importance of frontline staff in service improvement. The ability to influence and manage change has been identified as an essential skill for delivering new models of care. This article is the first in a three-part series designed to help nurses at all levels develop the knowledge and skills they will need to initiate and manage change. This article focuses on identifying what needs to be changed and why.

  19. Photocatalyzed removal of lead ion from lead-chelator solution

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Hyun; Na, Jung Won; Sung, Ki Woung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-07-01

    The present study was undertaken to examine the influence of such chelating agents on the ease and speed of photocatalyzed metal removal and deposition. With excess EDTA, the free EDTA competes with Pb for oxidation, and at a ten fold excess, no lead oxidation (hence removal) occurs. With insufficient EDTA, the corresponding initial concentration of Pb-EDTA is decreased; after its destruction, the remaining Pb{sup 2+} is removed more slowly, at rates found with lead nitrate solution. The net result is that the maximum rate of lead deposition occurs at the stoichiometric ratio of 1:1 EDTA : Pb{sup 2+}.

  20. Distribution of lead in teeth

    Energy Technology Data Exchange (ETDEWEB)

    Fremlin, J H; Tanti-Wipawin, W [Birmingham Univ. (UK). Dept. of Physics

    1976-07-01

    There is currently much concern with the amount of lead in the environment. Measurement of lead in teeth is being used to give information on the integrated uptake of lead by the individual over a period. The distribution of lead within individual teeth, is examined with the object of distinguishing lead deposited during formation or calcification from that taken up by the tooth over its working life after eruption. A tooth is sectioned and bombarded with 30-MeV ions of helium-3 from the Birmingham 1.52-m cyclotron, which produces polonium isotopes. The main useful activity is due to polonium-206, an ..cap alpha.. emitter, half-life 8 d. These ..cap alpha.. particles can be recorded by a plastic solid-state track detector.

  1. Distribution of lead in teeth

    International Nuclear Information System (INIS)

    Fremlin, J.H.; Tanti-Wipawin, W.

    1976-01-01

    There is currently much concern with the amount of lead in the environment. Measurement of lead in teeth is being used to give information on the integrated uptake of lead by the individual over a period. The distribution of lead within individual teeth, is examined with the object of distinguishing lead deposited during formation or calcification from that taken up by the tooth over its working life after eruption. A tooth is sectioned and bombarded with 30-MeV ions of helium-3 from the Birmingham 1.52-m cyclotron, which produces polonium isotopes. The main useful activity is due to polonium-206, an α emitter, half-life 8 d. These α particles can be recorded by a plastic solid-state track detector. (U.K.)

  2. Biosorption of lead phosphates by lead-tolerant bacteria as a mechanism for lead immobilization.

    Science.gov (United States)

    Rodríguez-Sánchez, Viridiana; Guzmán-Moreno, Jesús; Rodríguez-González, Vicente; Flores-de la Torre, Juan Armando; Ramírez-Santoyo, Rosa María; Vidales-Rodríguez, Luz Elena

    2017-08-01

    The study of metal-tolerant bacteria is important for bioremediation of contaminated environments and development of green technologies for material synthesis due to their potential to transform toxic metal ions into less toxic compounds by mechanisms such as reduction, oxidation and/or sequestration. In this study, we report the isolation of seven lead-tolerant bacteria from a metal-contaminated site at Zacatecas, México. The bacteria were identified as members of the Staphylococcus and Bacillus genera by microscopic, biochemical and 16S rDNA analyses. Minimal inhibitory concentration of these isolates was established between 4.5 and 7.0 mM of Pb(NO 3 ) 2 in solid and 1.0-4.0 mM of Pb(NO 3 ) 2 in liquid media. A quantitative analysis of the lead associated to bacterial biomass in growing cultures, revealed that the percentage of lead associated to biomass was between 1 and 37% in the PbT isolates. A mechanism of complexation/biosorption of lead ions as inorganic phosphates (lead hydroxyapatite and pyromorphite) in bacterial biomass, was determined by Fourier transform infrared spectroscopy and X-ray diffraction analyses. Thus, the ability of the lead-tolerant isolates to transform lead ions into stable and highly insoluble lead minerals make them potentially useful for immobilization of lead in mining waste.

  3. EU focus on climate change

    International Nuclear Information System (INIS)

    2002-01-01

    Faced with the mounting evidence of the harmful effects of climate change, the European Union is convinced that the world must take urgent action to tackle the problem. That is why the EU has been at the forefront of international efforts to deal with climate change for well over a decade. The EU is convinced that the status quo is simply not an option. Without urgent, concerted action, the problem will continue to get worse with potentially disastrous consequences. That is why the European Union has consistently taken the lead in international moves to tackle climate change and why it will continue to develop this strategy for as long as it takes to guarantee a world for ourselves and our children where everyone can grow, breathe and live in safety

  4. ZT Optimization: An Application Focus.

    Science.gov (United States)

    Tuley, Richard; Simpson, Kevin

    2017-03-17

    Significant research has been performed on the challenge of improving thermoelectric materials, with maximum peak figure of merit, ZT, the most common target. We use an approximate thermoelectric material model, matched to real materials, to demonstrate that when an application is known, average ZT is a significantly better optimization target. We quantify this difference with some examples, with one scenario showing that changing the doping to increase peak ZT by 19% can lead to a performance drop of 16%. The importance of average ZT means that the temperature at which the ZT peak occurs should be given similar weight to the value of the peak. An ideal material for an application operates across the maximum peak ZT, otherwise maximum performance occurs when the peak value is reduced in order to improve the peak position.

  5. Focusing telescopes in nuclear astrophysics

    International Nuclear Information System (INIS)

    Von Ballmoos, P.; Knodlseder, R.; Sazonov, S.; Griffiths, R.; Bastie, P.; Halloin, H.; Pareschi, G.; Ramsey, B.; Jensen, C.; Buis, E.J.; Ulmer, M.; Giommi, P.; Colafrancesco, S.; Comastri, A.; Barret, D.; Leising, M.; Hernanz, M.; Smith, D.; Abrosimov, N.; Smither, B.; Ubertini, P.; Olive, J.F.; Lund, N.; Pisa, A.; Courtois, P.; Roa, D.; Harrison, F.; Pareschi, G.; Frontera, F.; Von Ballmoos, P.; Barriere, N.; Rando, N.; Borde, J.; Hinglais, E.; Cledassou, R.; Duchon, P.; Sghedoni, M.; Huet, B.; Takahashi, T.; Caroli, E.; Quadrinin, L.; Buis, E.J.; Skinner, G.; Krizmanic, J.; Pareschi, G.; Loffredo, G.; Wunderer, C.; Weidenspointner, G.; Wunderer, C.; Koechlin, L.; Bignami, G.; Von Ballmoos, P.; Tueller, J.; Andritschke, T.; Laurens, A.; Evrard, J.

    2005-01-01

    The objective of this workshop is to consider the next generation of instrumentation to be required within the domain of nuclear astrophysics. A small, but growing community has been pursuing various techniques for the focusing of hard X-rays and gamma-rays with the aim of achieving a factor of up to 100 improvement in sensitivity over present technologies. Balloon flight tests of both multilayer mirrors and a Laue lens have been performed and ideas abound. At present, implementation scenarios for space missions are being studied at Esa, CNES, and elsewhere. The workshop will provide a first opportunity for this new community to meet, exchange technological know-how, discuss scientific objectives and synergies, and consolidate implementation approaches within National and European Space Science programs. This document gathers the slides of all the presentations

  6. Focusing telescopes in nuclear astrophysics

    Energy Technology Data Exchange (ETDEWEB)

    Von Ballmoos, P; Knodlseder, R; Sazonov, S; Griffiths, R; Bastie, P; Halloin, H; Pareschi, G; Ramsey, B; Jensen, C; Buis, E J; Ulmer, M; Giommi, P; Colafrancesco, S; Comastri, A; Barret, D; Leising, M; Hernanz, M; Smith, D; Abrosimov, N; Smither, B; Ubertini, P; Olive, J F; Lund, N; Pisa, A; Courtois, P; Roa, D; Harrison, F; Pareschi, G; Frontera, F; Von Ballmoos, P; Barriere, N; Rando, N; Borde, J; Hinglais, E; Cledassou, R; Duchon, P; Sghedoni, M; Huet, B; Takahashi, T; Caroli, E; Quadrinin, L; Buis, E J; Skinner, G; Krizmanic, J; Pareschi, G; Loffredo, G; Wunderer, C; Weidenspointner, G; Wunderer, C; Koechlin, L; Bignami, G; Von Ballmoos, P; Tueller, J; Andritschke, T; Laurens, A; Evrard, J

    2005-07-01

    The objective of this workshop is to consider the next generation of instrumentation to be required within the domain of nuclear astrophysics. A small, but growing community has been pursuing various techniques for the focusing of hard X-rays and gamma-rays with the aim of achieving a factor of up to 100 improvement in sensitivity over present technologies. Balloon flight tests of both multilayer mirrors and a Laue lens have been performed and ideas abound. At present, implementation scenarios for space missions are being studied at Esa, CNES, and elsewhere. The workshop will provide a first opportunity for this new community to meet, exchange technological know-how, discuss scientific objectives and synergies, and consolidate implementation approaches within National and European Space Science programs. This document gathers the slides of all the presentations.

  7. Tank Focus Area pretreatment activities

    International Nuclear Information System (INIS)

    McGinnis, C.P.; Welch, T.D.; Manke, K.L.

    1997-01-01

    Plans call for the high-level wastes to be retrieved from the tanks and immobilized in a stable waste form suitable for long-term isolation. Chemistry and chemical engineering operations are required to retrieve the wastes, to condition the wastes for subsequent steps, and to reduce the costs of the waste management enterprise. Pretreatment includes those processes between retrieval and immobilization, and includes preparation of suitable feed material for immobilization and separations to partition the waste into streams that yield lower life-cycle costs. Some of the technologies being developed by the Tank Focus Area (TFA) to process these wastes are described. These technologies fall roughly into three areas: (1) solid/liquid separation (SLS), (2) sludge pretreatment, and (3) supernate pretreatment

  8. Focus: Asian migration to Canada.

    Science.gov (United States)

    Kobayashi, A

    1988-01-01

    This collection of 5 short essays on Asian migration to Canada focuses on the relationships between individual migrants and their social contexts, both Asian and Canadian. Papers by Anderson and Kobayashi adopt research perspectives of outsider and insider, respectively. Vibert provides a historical overview against which the substantive issues introduced in the other 3 papers can be understood, and he illustrates the links between circumstances of migration and the larger issues by which the course of Canadian social progress has been steered. Mercer provides an introduction to issues that dominate the agenda of contemporary research, to show that Canadian communities of Asian heritage continue to grow in size, diversity, and complexity, as they become more established on the Canadian landscape. This collection is as much about the geography of racism as it is about migration.

  9. Environmental lead hazard to children.

    Science.gov (United States)

    Mittal, S K

    1992-01-01

    Clinically evident lead poisoning is rare in Indian children but is more common than in adults. In children, lead poisoning may appear as fever, seizures, anemia, or abdominal pain, while in adults it is more likely to manifest as chronic minor peripheral neuropathy or gum pigmentation. Children with acute lead poisoning can be treated with chelators such as EDTA and BAL, but many are left with permanent brain damage. The most common sources of acute lead poisoning in Indian children are inhalation of fumes from burned car batteries, ingestion of flaking paint, consuming food cooked in cheap aluminum or brass utensils, and eating contaminated soil. The sources of chronic lead poisoning are water from lead pipes and fumes from industrial or automotive exhaust. Another common source in India is application of "kajjal" to children's eyes. Sources of lead in Western countries, such as drinking water, canned food, residential paint, automotive fuel, and ambient air quality, are regulated by law. None of these are regulated in India.

  10. Focus on quantum Einstein gravity Focus on quantum Einstein gravity

    Science.gov (United States)

    Ambjorn, Jan; Reuter, Martin; Saueressig, Frank

    2012-09-01

    The gravitational asymptotic safety program summarizes the attempts to construct a consistent and predictive quantum theory of gravity within Wilson's generalized framework of renormalization. Its key ingredient is a non-Gaussian fixed point of the renormalization group flow which controls the behavior of the theory at trans-Planckian energies and renders gravity safe from unphysical divergences. Provided that the fixed point comes with a finite number of ultraviolet-attractive (relevant) directions, this construction gives rise to a consistent quantum field theory which is as predictive as an ordinary, perturbatively renormalizable one. This opens up the exciting possibility of establishing quantum Einstein gravity as a fundamental theory of gravity, without introducing supersymmetry or extra dimensions, and solely based on quantization techniques that are known to work well for the other fundamental forces of nature. While the idea of gravity being asymptotically safe was proposed by Steven Weinberg more than 30 years ago [1], the technical tools for investigating this scenario only emerged during the last decade. Here a key role is played by the exact functional renormalization group equation for gravity, which allows the construction of non-perturbative approximate solutions for the RG-flow of the gravitational couplings. Most remarkably, all solutions constructed to date exhibit a suitable non-Gaussian fixed point, lending strong support to the asymptotic safety conjecture. Moreover, the functional renormalization group also provides indications that the central idea of a non-Gaussian fixed point providing a safe ultraviolet completion also carries over to more realistic scenarios where gravity is coupled to a suitable matter sector like the standard model. These theoretical successes also triggered a wealth of studies focusing on the consequences of asymptotic safety in a wide range of phenomenological applications covering the physics of black holes, early

  11. Patient satisfaction: focusing on "excellent".

    Science.gov (United States)

    Otani, Koichiro; Waterman, Brian; Faulkner, Kelly M; Boslaugh, Sarah; Burroughs, Thomas E; Dunagan, W Claiborne

    2009-01-01

    In an emerging competitive market such as healthcare, managers should focus on achieving excellent ratings to distinguish their organization from others. When it comes to customer loyalty, "excellent" has a different meaning. Customers who are merely satisfied often do not come back. The purpose of this study was to find out what influences adult patients to rate their overall experience as "excellent." The study used patient satisfaction data collected from one major academic hospital and four community hospitals. After conducting a multiple logistic regression analysis, certain attributes were shown to be more likely than others to influence patients to rate their experiences as excellent. The study revealed that staff care is the most influential attribute, followed by nursing care. These two attributes are distinctively stronger drivers of overall satisfaction than are the other attributes studied (i.e., physician care, admission process, room, and food). Staff care and nursing care are under the control of healthcare managers. If improvements are needed, they can be accomplished through training programs such as total quality management or continuous quality improvement, through which staff employees and nurses learn to be sensitive to patients' needs. Satisfying patients' needs is the first step toward having loyal patients, so hospitals that strive to ensure their patients are completely satisfied are more likely to prosper.

  12. Magnetic tearing in plasma focus

    International Nuclear Information System (INIS)

    Sharkawy, W.

    1994-01-01

    A plasma focus device used is Mather type filled with hydrogen gas at pressure between 0.1 and 1 torr. When connected to a large capacitor ≤10 KV a discharge is started with peak current 100 KA. Under the influence of the radial electric field E r , due to the potential between electrodes, and B φ the plasma will drift in the axial direction with velocity cE r /B φ . An induced axial magnetic field B z has been detected which due to sheath velocity. A propagation of magnetosonic wave has been observed with velocity ≅10 3 m sec -1 . Such a wave might be excited when the magnetic pressure is much greater than the plasma kinetic pressure B 2 /8π>nKT. Assuming (MHD) to be stable, Tearing model was driven which generally has smaller growth rates than (MHD) modes. Using the designed theoretical model and the plasma parameters the electron energy dΦ/dt=Ba 2 /τ R was calculated to be 2.22 KeV, which is comparable with that detected from X-ray measurements. (author)

  13. Focus issue introduction: nonlinear photonics.

    Science.gov (United States)

    Akhmediev, Nail; Rottwitt, Karsten

    2012-11-19

    It is now 23 years since the first Topical Meeting "Nonlinear Guided Wave Phenomena" (Houston, TX, February 2-4, 1989) has been organised by George Stegeman and Allan Boardman with support of the Optical Society of America. These series of the OSA conferences known as NLGW, continued under the name "Nonlinear Photonics" starting from 2007. The latest one, in Colorado Springs in June 17-21, 2012 has been a great success despite the fierce fires advancing around the city at the time of the conference. This Focus issue is a collection of several papers presented at the conference with extended content submitted to Optics Express. Although this collection is small in comparison to the total number of papers presented at the conference, it gives a flavor of the topics considered at the meeting. It is also worthy to mention here that the next meeting "Nonlinear Photonics" is planned to be held in Barcelona - one of the main European centers on this subject.

  14. Findings: LANL outsourcing focus groups

    Energy Technology Data Exchange (ETDEWEB)

    Jannotta, M.J.; McCabe, V.B.

    1996-12-31

    In March 1996, a series of 24 3-hour dialog focus groups were held with randomly selected Laboratory employees and contractors to gain their perceptions regarding potentials and problems for privatization and consolidation. A secondary goal was to educate and inform the workforce about potentials and issues in privatization and consolidation. Two hundred and thirty-six participants engaged in a learning session and structured input exercises resulting in 2,768 usable comments. Comments were categorized using standard qualitative methods; resulting categories included positive and negative comments on four models (consolidation, spin offs, outsourcing, and corporate partnering) and implications for the workforce, the Laboratory, and the local economy. Categories were in the areas of increasing/decreasing jobs, expertise, opportunity/salary/benefits, quality/efficiency, and effect on the local area and economy. An additional concern was losing Laboratory culture and history. Data were gathered and categorized on employee opinion regarding elements of successful transition to the four models, and issues emerged in the areas of terms and conditions of employment; communication; involvement; sound business planning; ethics and fairness; community infrastructure. From the aggregated opinion of the participants, it is recommended that decision-makers: Plan using sound business principles and continually communicate plans to the workforce; Respect workforce investments in the Laboratory; Tell the workforce exactly what is going on at all times; Understand that economic growth in Northern New Mexico is not universally viewed as positive; and Establish dialog with stakeholders on growth issues.

  15. Workshop on crystals and focusing

    Science.gov (United States)

    Berreman, D. W.

    1980-12-01

    The purpose of the workshop on crystals and focusing was to exchange and pool the experience and information that the participants could contribute on the design and construction of monochromators for EXAFS with optimum speed, resolution and versatility. The panel was chaired by D.W. Berreman of BTL and included G. G. Cohen of NBS, S. Heald of Brookhaven National Labs and Lu Kun-quan of U. of Washington. Written contributions for the workshop were made by R. J. Emrich and J. R. Katzer of U. of Delaware, R. C. Gamble of Cal. Tech., J. Crane of Cal. Tech., and T. Matsushita of S. S. R. L. G. Bunker of U. of Washington was recording secretary, G. G. Cohen and S. Heald gave invited papers on the main program that were relevant to the workshop. Other contributors were R. Hänsel of U. of Kiel, W. Germany, G. Christoff of Ohio State and D. Hempstead of Rigaku/USA Inc., J. Holben of Marconi Avionics, Hertfordshire, England and J. Hastings of Brookhaven N. L.

  16. EDITORIAL: Focus on Carbon Nanotubes

    Science.gov (United States)

    2003-09-01

    The study of carbon nanotubes, since their discovery by Iijima in 1991, has become a full research field with significant contributions from all areas of research in solid-state and molecular physics and also from chemistry. This Focus Issue in New Journal of Physics reflects this active research, and presents articles detailing significant advances in the production of carbon nanotubes, the study of their mechanical and vibrational properties, electronic properties and optical transitions, and electrical and transport properties. Fundamental research, both theoretical and experimental, represents part of this progress. The potential applications of nanotubes will rely on the progress made in understanding their fundamental physics and chemistry, as presented here. We believe this Focus Issue will be an excellent guide for both beginners and experts in the research field of carbon nanotubes. It has been a great pleasure to edit the many excellent contributions from Europe, Japan, and the US, as well from a number of other countries, and to witness the remarkable effort put into the manuscripts by the contributors. We thank all the authors and referees involved in the process. In particular, we would like to express our gratitude to Alexander Bradshaw, who invited us put together this Focus Issue, and to Tim Smith and the New Journal of Physics staff for their extremely efficient handling of the manuscripts. Focus on Carbon Nanotubes Contents Transport theory of carbon nanotube Y junctions R Egger, B Trauzettel, S Chen and F Siano The tubular conical helix of graphitic boron nitride F F Xu, Y Bando and D Golberg Formation pathways for single-wall carbon nanotube multiterminal junctions Inna Ponomareva, Leonid A Chernozatonskii, Antonis N Andriotis and Madhu Menon Synthesis and manipulation of carbon nanotubes J W Seo, E Couteau, P Umek, K Hernadi, P Marcoux, B Lukic, Cs Mikó, M Milas, R Gaál and L Forró Transitional behaviour in the transformation from active end

  17. Focused conformational sampling in proteins

    Science.gov (United States)

    Bacci, Marco; Langini, Cassiano; Vymětal, Jiří; Caflisch, Amedeo; Vitalis, Andreas

    2017-11-01

    A detailed understanding of the conformational dynamics of biological molecules is difficult to obtain by experimental techniques due to resolution limitations in both time and space. Computer simulations avoid these in theory but are often too short to sample rare events reliably. Here we show that the progress index-guided sampling (PIGS) protocol can be used to enhance the sampling of rare events in selected parts of biomolecules without perturbing the remainder of the system. The method is very easy to use as it only requires as essential input a set of several features representing the parts of interest sufficiently. In this feature space, new states are discovered by spontaneous fluctuations alone and in unsupervised fashion. Because there are no energetic biases acting on phase space variables or projections thereof, the trajectories PIGS generates can be analyzed directly in the framework of transition networks. We demonstrate the possibility and usefulness of such focused explorations of biomolecules with two loops that are part of the binding sites of bromodomains, a family of epigenetic "reader" modules. This real-life application uncovers states that are structurally and kinetically far away from the initial crystallographic structures and are also metastable. Representative conformations are intended to be used in future high-throughput virtual screening campaigns.

  18. Optimization of an electrostatic quadrupole doublet focusing systems

    Energy Technology Data Exchange (ETDEWEB)

    Hussein, Oday A., E-mail: oah@sc.nahrainuniv.edu.iq [Department of Physics, College of Science, Al-Nahrain University, Baghdad (Iraq); Sise, Omer [Department of Science Education, Faculty of Education, Suleyman Demirel University, Isparta (Turkey)

    2017-05-15

    Highlights: • The imaging properties of an electrostatic quadrupole doublet lens were analyzed with the aid of computer simulation. • The optimal electrode voltages which lead to stigmatic image in both planes of the quadrupole doublet lens with minimum spot size at position sensitive detector (PSD) were found for two operation modes: point-to-point focusing and parallel-to-point focusing. • The imaging properties of are very sensitive to the lunching angle of the electron-beam. - Abstract: The imaging properties of an electrostatic quadrupole doublet lens were analyzed with the aid of computer simulation. The optimal electrode voltages which lead to stigmatic image in both planes of the quadrupole doublet lens with minimum spot size at position sensitive detector (PSD) were found for two operation modes: point-to-point focusing and parallel-to-point focusing. The optical properties as: Magnifications, spot sizes in the image plane and aberration figures were discussed. The results showed that the focusing of the lens was strong in the xy-plane in comparison with the focusing in the xz-plane. The distortion of the image was greater when the image position will be close to the lens in comparison with object position. Also, the imaging properties were very sensitive to the lunching angle of the electron-beam.

  19. Water quality criteria for lead

    Energy Technology Data Exchange (ETDEWEB)

    Nagpal, N.K.

    1987-01-01

    This report is one in a series that establishes water quality criteria for British Columbia. The report sets criteria for lead to protect a number of water uses, including drinking water, freshwater and marine aquatic life, wildlife, livestock, irrigation, and recreation. The criteria are set as either maximum concentrations of total lead that should not be exceeded at any time, or average concentrations that should not be exceeded over a 30-day period. Actual values are summarized.

  20. Chronic lead intoxication in calves

    Energy Technology Data Exchange (ETDEWEB)

    Wagenaar, G

    1963-01-01

    Four calves born in the winter of 1961-1962 died on a farm after a disease which had run its course for periods ranging from six weeks to a few months. A calf had also died showing similar symptoms during the previous year. All calves showed identical symptoms. Initially, their liveliness diminished; subsequently, they drank less and showed signs of pica. They finally died after the disease had run its course for about six weeks. The last calf, born late in February 1962, was in poor health as early as May, improved slightly when it had been sent out to grass but died in September, having fallen ill again in August. Autopsy was performed on three calves; all three were affected with chronic interstitial nephritis and uraemic endocarditis of the left auricle was present as well. The results obtained on toxicological investigation were indicative of lead poisoning. The liver of the calf was found to contain two mg of lead per kg, the cortex of the kidney containing twenty-five mg of lead per kg. These figures did not provide direct evidence of lead poisoning, but in evaluating these figures the fact was taken into account that the calf had no longer been able to ingest any lead for several months. Meanwhile, it was found that the stock-owner had fitted an old painted door in the calf-shed, which door was constantly being licked by the calves. The paint contained 18.6% of lead. This finding was followed by examination of the liver of a calf that had died previously. It was found to contain 49.7 mg of lead per kg. Accordingly, the calves had been affected with a form of lead poisoning running a relatively slow course, as a result of which the animals had developed chronic interstitial nephritis. The calves eventually died from uraemia. 4 references.

  1. Focusing on Cause or Cure?

    Science.gov (United States)

    Milner, Lauren C.; Cho, Mildred K.

    2013-01-01

    Background Biomedical research is influenced by many factors, including the involvement of stakeholder groups invested in research outcomes. Stakeholder involvement in research efforts raise questions of justice as their specific interests and motivations play a role in directing research resources that ultimately produce knowledge shaping how different conditions (and affected individuals) are understood and treated by society. This issue is highly relevant to child psychiatry research where diagnostic criteria and treatment strategies are often controversial. Biological similarities and stakeholder differences between attention deficit hyperactivity disorder (ADHD) and autism spectrum disorder (ASD) provide an opportunity to explore this issue by comparing research foci and stakeholder involvement in these conditions. Methods A subset of ADHD and ASD research articles published between 1970-2010 were randomly selected from the PubMed database and coded for research focus, funding source(s), and author-reported conflicts of interest (COIs). Chi-square analyses were performed to identify differences between and within ADHD and ASD research across time. Results The proportion of ADHD research dedicated to basic, description, and treatment research was roughly similar and remained stable over time, while ASD research showed a significant increase in basic research over the past decade. Government was the primary research funder for both conditions, but for-profit funders were a notable presence in ADHD research, while joint-funding efforts between non-profit and government funders were a notable presence in ASD research. Lastly, COIs were noted more frequently in ADHD than in ASD research. Conclusions Our study shows significant differences in research foci and funding sources between the conditions, and identifies the specific involvement of for-profit and non-profit groups in ADHD and ASD, respectively. Our findings highlight the relationship between stakeholders

  2. Identifying Lead Markets in the European Automotive Industry

    DEFF Research Database (Denmark)

    Cleff, Thomas; Grimpe, Christoph; Rammer, Christian

    2015-01-01

    for automobiles and national markets differ considerably in their lead market potential. The German market is found to be most promising to serve as a lead market, while other European countries with a strong automotive tradition like France, Italy, the UK, and Sweden score lower. Our findings suggest that firms......This paper presents an indicator-based methodology to identify lead markets in the European automotive industry. The lead market approach tries to explain why certain countries are better positioned than others for developing and launching new products. While much research stresses the role...... of excellence in technology and interaction among users and producers, the lead market approach focuses on the role of demand characteristics. Based on the concept of innovation design, a lead market is defined as a country where customers prefer that design which subsequently becomes the globally dominant...

  3. Focus groups reveal consumer ambivalence.

    Science.gov (United States)

    1983-01-01

    According to qualitative research, Salvadoreans are ambivalent about the use of contraceptives. Since complete responsibility for management of the CSM project was accepted by the Association Demografica Salvadorena (ADS), the agency which operates the contraceptive social marketing project in El Salvador, in November 1980, the need for decisions in such areas as product price increases, introduction of new condom brands, promotion of the vaginal foaming tablet, and assessment of product sales performance had arisen. The ICSMP funded market research, completed during 1983, was intended to provide the data on which such decisions by ADS could be based. The qualitative research involved 8 focus groups, comprised of men and women, aged 18-45, contraceptive users and nonusers, from the middle and lower socioeconomic strata of the city of San Salvador and other suburban areas. In each group a moderator led discussion of family planning and probed respondents for specific attitudes, knowledge, and behavior regarding the use of contraceptives. To assess attitudes at a more emotional level, moderators asked respondents to "draw" their ideas on certain issues. A marked discrepancy was revealed between respondents' intellectual responses to the issues raised in group discussion, as opposed to their feelings expressed in the drawings. Intellectually, participants responded very positively to family planning practice, but when they were asked to draw their perceptions, ambivalent feelings emerged. Drawings of both the user and the nonuser convey primarily negative aspects for either choice. The user is tense and moody toward her children; the nonuser loses her attractiveness and "dies." Figures also show drawings of some of the attitudes of single and married male participants. 1 drawing shows an incomplete and a complete circle, symbolizing a sterilized man (incomplete) and a nonsterilized man (complete). Another picture depicts a chained man who has lost his freedom

  4. Keep the focus on emissions

    Science.gov (United States)

    Clack, C.; Benson, S. M.; Peterson, P.; Long, J. C. S.

    2016-12-01

    Most think that the major battle over climate is between those that want to solve the climate problem and the climate deniers. But there is another conflict, perhaps equally significant between people who all agree climate is a problem but who disagree radically about what they think the solution is. The imperative for stopping further climate change is to stop GHG emissions and the first energy sector of importance is electricity. Every major plan to eliminate emmissions from energy requires a carbon-free electricity system. The most popular idea about how to do this is to use all renewable energy, i.e. solar and wind power. But no one has ever built a large scale 100% renewable energy system and the few examples we have about regions that have tried are not encouraging. As the percentage of renewable energy goes up, ensuring a reliable supply often requires a fossil-based back-up system, so emissions can actually increase. Also, 100% renewable systems rely on massive deployment rates, far beyond any historical precident and often assume that adequate energy storage will "happen" through a combination of currently unavailable technologies. This approach is about adding renewable capacity, not about reducing emissions. Sweden provides a counter example that relies entirely on nuclear power and hydro and has an emission-free, reliable energy system. Likewise, biofuel is often cited as a climate-friendly substitute for petroleum-based fuels. Life-cycle analsyis indicates biofuels are often worse than petroleum-based fuels. We focus efficiency measures on buildings, but efficiency in transportation is even more important because we don't really have the fuel that is carbon neutral. Vehicle efficiency and reductions in vehicle miles traveled does better to address emissions. As mitigation is so important, climate advocates used to think discussion of adaptation was a distraction that should be avoided. But losing track of the need to eliminate emissions is the real

  5. Lead isotope in mineral exploration

    International Nuclear Information System (INIS)

    Gulson, B.L.

    1986-01-01

    This book provides an up-to-date state-of-the-art review of lead isotopes in mineral exploration. Beginning with an historical review on suggested uses of lead isotopes in mineral exploration, the author then outlines the theoretical aspects of lead isotopes and illustrates that the method is based on well-known principles of radioactive decay, from which isotopic signatures for different styles of mineralization are derived. The varying isotopic signatures are then introduced. The major part of the book details over 40 case histories for base and precious metals, uranium and tin using sampling media such as sulfides, gossans, soils, weathered bedrock, vegetation and groundwaters. Advantages and disadvantages of each are discussed. Examples are given of the use of lead isotopes in testing conceptual models for exploration. The success rate and cost-effectiveness of the method are illustrated by actual exploration examples. Analytical advances which should lower the cost of the method and future uses are outlined. Many of the case histories use recently published or unpublished data, 27 tables of which are given in an appendix. Details of sampling, the methods for obtaining the isotope ratios, and a commercially-available integrated lead isotope service are also provided. (Auth.)

  6. Lead poisoning after gunshot wound

    Directory of Open Access Journals (Sweden)

    Paulo Roberto de Madureira

    2000-05-01

    Full Text Available CONTEXT: Despite the absence of symptoms in the majority of patients carrying lead bullet fragments in their bodies, there needs to be an awareness of the possible signs and symptoms of lead intoxication when bullets are lodged in large joints like knees, hips and shoulders. Such patients merit closer follow-up, and even surgical procedure for removing the fragments. OBJECTIVE: To describe a patient who developed clinical lead intoxication several years after a gunshot wound. DESIGN: Case report. CASE REPORT: A single white 23-year-old male, regular job as a bricklayer, with a history of chronic alcohol abuse, showed up at the emergency department complaining of abdominal pain with colic, weakness, vomiting and diarrhea with black feces. All the symptoms had a duration of two to three weeks, and had been recurrent for the last two years, with calming during interval periods of two to three weeks. Abdominal radiograms showed a bullet lodged in the left hip, with a neat bursogram of the whole synovial capsule. A course of chelating treatment using calcium versenate (EDTACaNa2 intravenously was started. After the chelation therapy the patient had recurrence of his symptoms and a radical solution for the chronic mobilization of lead was considered. A hip arthroplasty procedure was performed, leading to complete substitution of the left hip.

  7. Lead and Hyperactivity: Lead Levels Among Hyperactive Children

    Science.gov (United States)

    David, Oliver J.; And Others

    1977-01-01

    In the study it is shown that within a group of 84 hyperactive children (4 to 11 years old) those for whom an organic etiology is present have lead burdens lower than in those for whom no apparent cause could be found. (Author/SBH)

  8. EDITORIAL: Focus on Plasma Medicine

    Science.gov (United States)

    Morfill, G. E.; Kong, M. G.; Zimmermann, J. L.

    2009-11-01

    'Plasma Healthcare' is an emerging interdisciplinary research topic of rapidly growing importance, exploring considerable opportunities at the interface of plasma physics, chemistry and engineering with life sciences. Some of the scientific discoveries reported so far have already demonstrated clear benefits for healthcare in areas of medicine, food safety, environmental hygiene, and cosmetics. Examples include ongoing studies of prion inactivation, chronic wound treatment and plasma-mediated cancer therapy. Current research ranges from basic physical processes, plasma chemical design, to the interaction of plasmas with (i) eukaryotic (mammalian) cells; (ii) prokaryotic (bacteria) cells, viruses, spores and fungi; (iii) DNA, lipids, proteins and cell membranes; and (iv) living human, animal and plant tissues in the presence of biofluids. Of diverse interests in this new field is the need for hospital disinfection, in particular with respect to the alarming increase in bacterial resistance to antibiotics, the concomitant needs in private practices, nursing homes etc, the applications in personal hygiene—and the enticing possibility to 'design' plasmas as possible pharmaceutical products, employing ionic as well as molecular agents for medical treatment. The 'delivery' of the reactive plasma agents occurs at the gaseous level, which means that there is no need for a carrier medium and access to the treatment surface is optimal. This focus issue provides a close look at the current state of the art in Plasma Medicine with a number of forefront research articles as well as an introductory review. Focus on Plasma Medicine Contents Application of epifluorescence scanning for monitoring the efficacy of protein removal by RF gas-plasma decontamination Helen C Baxter, Patricia R Richardson, Gaynor A Campbell, Valeri I Kovalev, Robert Maier, James S Barton, Anita C Jones, Greg DeLarge, Mark Casey and Robert L Baxter Inactivation factors of spore-forming bacteria using low

  9. Leading an Independent School Today Means Leading Change

    Science.gov (United States)

    Walpole, Andrew Robert Nicholas

    2014-01-01

    This Executive Leadership Portfolio (ELP) is the story of my journey through the Ed.D. program that begins with me focusing my work on trying to reverse my school's attrition woes, then changes course as I try to make my project reverse my own failed head of school candidacies, and ends with me discovering that, along the way, I had learned to…

  10. Microcirculation in experimental lead poisoning

    Energy Technology Data Exchange (ETDEWEB)

    Fimiani, R; Silvestroni, A; Iavicoli, N

    1973-01-01

    A study was made of the microvascular system of the auricle of the ear in 15 rabbits to which a 10 percent solution of lead acetate (0.5cm/sup 3//kg) was administered daily for 15 days through the gastric tract. Every 5 days up to the 35th day, determinations of blood and urine lead, free erythrocyte protoporphyrins and urinary coproporphyrins were carried out. Observations of the microvascular system were carried out in basic conditions after 6, 11, 16, 26 and 36 days. On the 6th day there was no pathological finding; on the 11th day small changes of the vascular content were observed, progressively assuming a sludge-like aspect. These findings confirm the hypothesis that the earliest changes caused by lead appear in the vascular content, before parietal changes occur.

  11. Jet calculus beyond leading logarithms

    International Nuclear Information System (INIS)

    Kalinowski, J.; Konishi, K.; Taylor, T.R.

    1981-01-01

    It is shown that the evolution of hadronic jets produced in hard processes can be studied in terms of a simple parton branching picture, beyond the leading log approximation of QCD. The jet calculus is generalized to any given order of logs (but always to all orders of αsub(s)). We discuss the general structure of the formalism. Universality of jet evolution is discussed. We consider also a jet calorimetry measure and the multiplicity distribution of final states in a form which allows a systematic improvement of approximation. To the next-to-leading order, we prove the finiteness and elucidate the scheme dependence of parton subprocess probabilities. The physical inclusive cross section is shown to be scheme independent: next-to-leading results for e + e - → q (nonsinglet) + X agree with those of Curci and others. (orig.)

  12. Initial occupational exposure to lead

    Energy Technology Data Exchange (ETDEWEB)

    Forni, A.; Cambiaghi, G.; Secchi, G.C.

    1976-01-01

    Serial chromosome and biochemical studies were carried out in 11 subjects before and during initial occupational exposure to moderate quantities of lead fumes in a storage battery plant. The rate of abnormal metaphases, mostly with chromatid and one-break chromosome aberrations, was approximately doubled after one month of work; it further increased after two months of work; remained in this range up to seven months of exposure; and then tended to decrease somewhat. Blood lead levels increased progressively in the first few months, then reached a steady state. Urinary lead and coproporphyrin levels increased sharply after one month of work, while urinary delta-aminolevulinic acid (ALA) levels increased moderately. The ALA dehydratase (ALAD) activity of red blood cells (RBCs) was reduced to almost 50 percent of the initial values after one month, decreased further in subsequent months, and remained decreased through the remainder of the study.

  13. EDITORIAL: Focus on Attosecond Physics

    Science.gov (United States)

    Bandrauk, André D.; Krausz, Ferenc; Starace, Anthony F.

    2008-02-01

    future involve using overdense plasmas. Electronic processes on sub-atomic spatio-temporal scales are the basis of chemical physics, atomic, molecular, and optical physics, materials science, and even some life science processes. Research in these areas using the new attosecond tools will advance together with the ability to control electrons themselves. Indeed, we expect that developments will advance in a way that is similar to advances that have occurred on the femtosecond time scale, in which much previous experimental and theoretical work on the interaction of coherent light sources has led to the development of means for 'coherent control' of nuclear motion in molecules. This focus issue of New Journal of Physics is centered on experimental and theoretical advances in the development of new methodologies and tools for electron control on the attosecond time scale. Topics such as the efficient generation of harmonics; the generation of attosecond pulses, including those having only a few cycles and those produced from overdense plasmas; the description of various nonlinear, nonperturbative laser-matter interactions, including many-electron effects and few-cycle pulse effects; the analysis of ultrashort propagation effects in atomic and molecular media; and the development of inversion methods for electron tomography, as well as many other topics, are addressed in the current focus issue dedicated to the new field of 'Attosecond Physics'. Focus on Attosecond Physics Contents Observing the attosecond dynamics of nuclear wavepackets in molecules by using high harmonic generation in mixed gases Tsuneto Kanai, Eiji J Takahashi, Yasuo Nabekawa and Katsumi Midorikawa Core-polarization effects in molecular high harmonic generation G Jordan and A Scrinzi Interferometric autocorrelation of an attosecond pulse train calculated using feasible formulae Y Nabekawa and K Midorikawa Attosecond pulse generation from aligned molecules—dynamics and propagation in H2+ E Lorin, S

  14. Bioprospecting Archaea: Focus on Extreme Halophiles

    KAUST Repository

    Antunes, André

    2016-12-12

    In 1990, Woese et al. divided the Tree of Life into three separate domains: Eukarya, Bacteria, and Archaea. Archaea were originally perceived as little more than “odd bacteria” restricted to extreme environmental niches, but later discoveries challenged this assumption. Members of this domain populate a variety of unexpected environments (e.g. soils, seawater, and human bodies), and we currently witness ongoing massive expansions of the archaeal branch of the Tree of Life. Archaea are now recognized as major players in the biosphere and constitute a significant fraction of the earth’s biomass, yet they remain underexplored. An ongoing surge in exploration efforts is leading to an increase in the (a) number of isolated strains, (b) associated knowledge, and (c) utilization of Archaea in biotechnology. They are increasingly employed in fields as diverse as biocatalysis, biocomputing, bioplastic production, bioremediation, bioengineering, food, pharmaceuticals, and nutraceuticals. This chapter provides a general overview on bioprospecting Archaea, with a particular focus on extreme halophiles. We explore aspects such as diversity, ecology, screening techniques and biotechnology. Current and future trends in mining for applications are discussed.

  15. Literature in focus: A Berlin Romance

    CERN Multimedia

    2005-01-01

    The CERN staff have many hidden talents. Who knows, maybe a colleague you see every day is actually a virtuoso violinist, an accomplished sportsman or an internationally renowned collector. Mathilde Fontanet, a translator in the CERN Translation and Minutes Service, is a writer in her spare time. Those who read her first essays in the Graviton no doubt spotted her talent. Following the publication of four short stories, her first novel, 'Rabenstrasse 5', was published in Switzerland in May 2005. Its backdrop is the busy Berlin arts faculty in the early 1980s. Lydia, a student, meets a young woman who leads her into some rather unusual activities. In parallel, two friends, both professors of literature, each record their thoughts and emotions in a diary. The paths of Lydia and the two professors are to cross... The novel will be published in France on 14 October. Mathilde Fontanet will present it in the framework of a forthcoming 'Literature in Focus' event in the CERN Library. Mathilde Fontanet'Rabenstras...

  16. Chronic lead intoxication; Chronische Bleiintoxikation

    Energy Technology Data Exchange (ETDEWEB)

    Wieseler, B.; Leng, G. [Duesseldorf Univ. (Germany). Inst. fuer Hygiene; Lenz, S.; Schultz, C. [Klinikum Remscheid GmbH, Remscheid (Germany); Wilhelm, M. [Bochum Univ. (Germany). Inst. fuer Hygiene, Sozial- und Umweltmedizin

    1999-02-01

    The case of a female 68 years old patient is described. Here, a chronic lead intoxication was diagnosed after a two year old medical history with increasing attacks of colic-like abdominal pain often described as life-threatening. After repeated hospitalizations and intensive search for the cause of the symptoms, porphyria and anemia was found to be a sign of a chronic lead poisoning. The blood lead concentrations were always about a level of 600 {mu}g/L. The source of exposure could not be found by now. Neither home inspection nor environmental investigations have shown a recent source of lead intake by the patient. However, a possible occupational source of lead exposure at a blast furnace was established by anamnesis for 1952 to 1962. Thus, osteoporosis induced lead mobilisation was suspected. Noticeable are the results of the six abdominal survey radiographies taken during hospitalization within one year; three radiographies were taken following clinical admission and three before discharge of the patient. In comparison, the course shows a chronic relapsing alimentary supply from metallic particles of unknown genesis. The patient was treated with the sodium salt of 2,3-dimercapto-1-propansulfonic acid (DMPS, Dimaval{sup TM}). She was free of complain afterwards. Following therapy, the blood lead concentrations fell under a level of 400 {mu}m/L, but after several weeks the lead level raised up to the original level of 600 {mu}g/L. (orig.) [Deutsch] Es wird eine 68jaehrige Patientin vorgestellt, bei der nach fast zweijaehriger Krankengeschichte, die gekennzeichnet war durch rezidivierende, teils als lebensbedrohlich geschilderte Bauchkoliken, eine chronische Bleiintoxikation diagnostiziert wurde. Erst nach wiederholten stationaeren Krankenhausaufenthalten mit intensiver Suche nach der Krankheitsursache wurden das Krankheitsbild und die Laborwerte durch Zusatzuntersuchungen ergaenzt, so dass sich in der festgestellten Porphyrie und Anaemie die Diagnose der

  17. Deformation properties of lead isotopes

    International Nuclear Information System (INIS)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E.

    2016-01-01

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF 0 Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, 180 Pb and 184 Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF 0 functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF 0 functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron-rich lead isotopes undergo

  18. Ion Motion in the Adiabatic Focuser

    International Nuclear Information System (INIS)

    Henestroza, E.; Sessler, A.M.; Yu, S.S.

    2006-01-01

    In this paper we numerically study the effect of ion motion in an adiabatic focuser, motivated by a recent suggestion that ion motion in an adiabatic focuser might be significant and even preclude operation of the focuser as previously envisioned. It is shown that despite ion motion the adiabatic focuser should work as well as originally envisioned

  19. Leading in crisis: lessons for safety leaders.

    Science.gov (United States)

    George, William W; Denham, Charles R; Burgess, L Hayley; Angood, Peter B; Keohane, Carol

    2010-03-01

    The National Quality Forum (NQF) Safe Practices are a group of 34 evidence-based Safe Practices that should be universally used to reduce the risk of harm to patients. Four of these practices specifically address leadership. A recently published book, 7 Lessons for Leading in Crisis, offers practical advice on how to lead in crisis. An analysis of how concepts from the 7 lessons could be applied to the Safe Practices was presented nationally by webinar to assess the audience's reaction to the information. The objective of this article was to present the information and the audience's reaction to it. Recommendations for direct actions that health care leaders can take to accelerate adoption of NQF Safe Practices were presented to health care leaders, followed by an immediate direct survey that used Reichheld's "Net Promoter Score" to assess whether the concepts presented were considered applicable and valuable to the audience. In a separate presentation, the challenges and crises facing nursing leaders were addressed by nursing leaders. Six hundred seventy-four hospitals, with an average of 4.5 participants per hospital, participated in the webinar. A total of 272 safety leaders responded to a survey immediately after the webinar. A Net Promoter Score assessment revealed that 58% of those surveyed rated the value of the information at 10, and 91% scored the value of the webinar to be between 8 and 10, where 10 is considered a strong recommendation that those voting would recommend this program to others. The overwhelmingly high score indicated that the principles presented were important and valuable to this national audience of health care leadership. The 2010 environment of uncertainty and shrinking financial resources poses significant risk to patients and new challenges for leaders at all levels. A values-grounded focus on personal accountability for leading in crisis situations strongly resonates with those interested in or leading patient safety initiatives.

  20. Effects of attentional focus on walking stability in elderly.

    Science.gov (United States)

    de Melker Worms, Jonathan L A; Stins, John F; van Wegen, Erwin E H; Verschueren, Sabine M P; Beek, Peter J; Loram, Ian D

    2017-06-01

    Balance performance in the elderly is related to psychological factors such as attentional focus. We investigated the effects of internal vs. external focus of attention and fall history on walking stability in healthy older adults. Walking stability of twenty-eight healthy older adults was assessed by applying random unilateral decelerations on a split-belt treadmill and analysing the resulting balance recovery movements. The internal focus instruction was: concentrate on the movement of your legs, whereas the external focus instruction was: concentrate on the movement of the treadmill. In both conditions participants were asked to look ahead at a screen. Outcome measures were coefficient of variation of step length and step width, and characteristics of the centre of mass velocity time-series as analysed using statistical parametric mapping. Fall history was assessed using a questionnaire. After each perturbation participants required two to three strides to regain a normal gait pattern, as determined by the centre of mass velocity response. No effects were found of internal and external focus of attention instructions and fall history on any of the outcome measures. We conclude that, compared to an internal focus of attention instruction, external focus to the walking surface does not lead to improved balance recovery responses to gait perturbations in the elderly. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. EDITORIAL: Focus on Gravitational Lensing

    Science.gov (United States)

    Jain, Bhuvnesh

    2007-11-01

    Gravitational lensing emerged as an observational field following the 1979 discovery of a doubly imaged quasar lensed by a foreground galaxy. In the 1980s and '90s dozens of other multiply imaged systems were observed, as well as time delay measurements, weak and strong lensing by galaxies and galaxy clusters, and the discovery of microlensing in our galaxy. The rapid pace of advances has continued into the new century. Lensing is currently one of best techniques for finding and mapping dark matter over a wide range of scales, and also addresses broader cosmological questions such as understanding the nature of dark energy. This focus issue of New Journal of Physics presents a snapshot of current research in some of the exciting areas of lensing. It provides an occasion to look back at the advances of the last decade and ahead to the potential of the coming years. Just about a decade ago, microlensing was discovered through the magnification of stars in our galaxy by invisible objects with masses between that of Jupiter and a tenth the mass of the Sun. Thus a new component of the mass of our galaxy, dubbed MACHOs, was established (though a diffuse, cold dark matter-like component is still needed to make up most of the galaxy mass). More recently, microlensing led to another exciting discovery—of extra-solar planets with masses ranging from about five times that of Earth to that of Neptune. We can expect many more planets to be discovered through ongoing surveys. Microlensing is the best technique for finding Earth mass planets, though it is not as productive overall as other methods and does not allow for follow up observations. Beyond planet hunting, microlensing has enabled us to observe previously inaccessible systems, ranging from the surfaces of other stars to the accretion disks around the black holes powering distant quasars. Galaxies and galaxy clusters at cosmological distances can produce dramatic lensing effects: multiple images of background galaxies

  2. Self-focusing of electron bunches in a nonlinear plasma

    International Nuclear Information System (INIS)

    Krasovitskii, V.B.; Osmolovsky, S.I.

    1994-01-01

    The phenomena of self-focusing of previously bunched electron beam in hot nonlinear plasma with the frequency which less than the plasma one is studied. It is established that influence of the Miller's force nonlinearity of the plasma don't leads to self-focusing breaking. However in the case of a dense beam, the appearance strong resonant electric field is followed by the change of the sign of the plasma dielectric constant to positive at the beam axis. But the dielectric constant remain negative at the outer of the beam

  3. Mortality study of lead workers

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, W C; Gaffey, W R

    1975-01-01

    The mortality of 7,032 men employed for one or more years in lead production facilities or battery plants was followed over a 23-year period, 1947-70. Lead absorption in many of these men was greatly in excess of currently accepted standards based upon urinary and blood lead concentrations available for a portion of the group. There were 1,356 deaths reported. The standardized mortality ratio (SMR) for all causes was 107 for smelter workers and 99 for battery plant workers. Death from neoplasms were in slight excess in smelters, but not significantly increased in battery plants. There were no excess deaths from kidney tumors. The SMR for cardiovascular-renal disease was 96 for smelter workers and 101 for battery plant workers. There was definitely no excess in deaths from either stroke or hypertensive heart disease; however, deaths classified as other hypertensive disease and unspecified nephritis or renal sclerosis were higher than expected. The life expectancy of lead workers was calculated to be approximately the same as that of all U.S. males.

  4. High temperature superconductor current leads

    International Nuclear Information System (INIS)

    Zeimetz, B.; Liu, H.K.; Dou, S.X.

    1996-01-01

    Full text: The use of superconductors in high electrical current applications (magnets, transformers, generators etc.) usually requires cooling with liquid Helium, which is very expensive. The superconductor itself produces no heat, and the design of Helium dewars is very advanced. Therefore most of the heat loss, i.e. Helium consumption, comes from the current lead which connects the superconductor with its power source at room temperature. The current lead usually consists of a pair of thick copper wires. The discovery of the High Temperature Superconductors makes it possible to replace a part of the copper with superconducting material. This drastically reduces the heat losses because a) the superconductor generates no resistive heat and b) it is a very poor thermal conductor compared with the copper. In this work silver-sheathed superconducting tapes are used as current lead components. The work comprises both the production of the tapes and the overall design of the leads, in order to a) maximize the current capacity ('critical current') of the superconductor, b) minimize the thermal conductivity of the silver clad, and c) optimize the cooling conditions

  5. Lead apron: room for improvement

    Energy Technology Data Exchange (ETDEWEB)

    Boothroyd, A.E.; Russell, J.G.B.

    1987-02-01

    The amount of red bone marrow not protected by a lead apron was used as an assessment of protection efficiency, and the effect of change of shape was calculated. It was concluded that change of shape would increase protection and cut down cost. (U.K.).

  6. OPAL Various Lead Glass Blocks

    CERN Multimedia

    These lead glass blocks were part of a CERN detector called OPAL (one of the four experiments at the LEP particle detector). OPAL uses some 12 000 blocks of glass like this to measure particle energies in the electromagnetic calorimeter. This detector measured the energy deposited when electrons and photons were slowed down and stopped.

  7. Copper, lead and zinc production

    International Nuclear Information System (INIS)

    Ayers, J.; Ternan, S.

    2001-01-01

    This chapter provides information on the by-products and residues generated during the production of copper, lead and zinc. The purpose of this chapter is to describe by-products and residues which are generated, how these may be avoided or minimised, and available options for the utilization and management of residues. (author)

  8. Lead-iron phosophate glass

    International Nuclear Information System (INIS)

    Sales, B.C.; Boatner, L.A.

    1988-01-01

    The lead-iron phosphate nuclear waste glasses (LIPNWG) are the subject of the present chapter. They were discovered in 1984 while the authors were attempting to find a sintering aid for certain types of crystalline monazite ceramic high-level nuclear waste forms. In the present chapter, the term waste glass is synonymous with nuclear waste glass (NWG), and the acronym LIP is often used for lead-iron phosphate. Lead-iron phosphate glasses, like many of the previously studied phosphate glasses, are corrosion resistant in aqueous solutions at temperatures below 100 degrees C, and they can be melted and poured at temperatures that are relatively low in comparison with the processing temperatures required for current silicate glass compositions. Unlike the phosphate glasses investigated previously, however, LIPNWGs do not suffer from alteration due to devitrification during realistic and readily, achievable cooling periods. Additionally, lead-iron phosphate glass melts are not nearly as corrosive as the sodium phosphate melts investigated during the 1960s; and, therefore, they can be melted and processed using crucibles made from a variety of materials

  9. Current Leads, Links and Buses

    CERN Document Server

    Ballarino, A

    2014-01-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  10. Triplet states in lead isotopes

    International Nuclear Information System (INIS)

    Naz, Tabassum; Ahmad, Shakeb; Abusara, H.

    2017-01-01

    Axial and triaxial calculations within RHB have been done to study the shape coexistence phenomena in the lead isotopes. Triplet states have been found in the 184-190 Pb which are in accordance with the experimental and other theoretical observations. The energy difference (in MeV) between the first two excited states also gives the evidence for the same

  11. Lead in calcium supplements (abstract)

    International Nuclear Information System (INIS)

    Rehman, S.; Khalid, N.

    2011-01-01

    Lead present in calcium supplements is of grave concern as some lead levels have been measured up to the extent of regulatory limit set by the United States. Calcium supplements inevitably get contaminated with lead as both are naturally occurring elements. Therefore, it is imperative to indicate its level in these supplements in order to create awareness among consumers. In this study, a sophisticated analytical technique, atomic absorption spectrometry was used to analyze Pb contents in 27 commonly consumed Ca supplements manufactured by different national and multinational companies. The daily intake of lead through these supplements was calculated. Only 10% of the calcium supplements analyzed met the criteria of acceptable Pb levels (1.5 mu g/daily dose) in supplements/consumer products set by the United States. It was also found that Pb intake was highest in chelated calcium supplements 28.5 mu g/daily dose, whereas lowest 0.47 mu g/daily dose through calcium supplements with vitamin D formulation. In order to validate our results from the study conducted, IAEA-certified reference material (animal bone, H-5) was analyzed for its Pb levels. The levels of Pb determined were quite in good agreement with the certified values. (author)

  12. How to lead complex situations

    DEFF Research Database (Denmark)

    Hansen, Michael Pingel

    2013-01-01

    The military leader is experiencing increasingly more complex situations, whether it is as leader in a foreign combat environment or in the home-based public administration. Complex situations like these call for a special set of managerial responses and a special way of leading organisations...

  13. Current Leads, Links and Buses

    Energy Technology Data Exchange (ETDEWEB)

    Ballarino, A [European Organization for Nuclear Research, Geneva (Switzerland)

    2014-07-01

    Electrical transfer from a room temperature power source to a superconducting system is done via conventional or superconducting current leads and superconducting buses or links. The principles of optimization of these devices are presented, with emphasis on the cryogenic, electrical, and superconductor related aspects that drive choices for a system.

  14. Leading in a Technological Age

    Science.gov (United States)

    Yadgir, Sheri A.

    2011-01-01

    Technology is advancing more rapidly than at any time in history since the beginning of the Industrial Revolution. In fact, experts say that the world is leaving the Industrial Age of the 20th century and entering an Information Age that will lead into the future. These advances mean that important changes are being made in all areas of life--and…

  15. Leading with Soul and Spirit.

    Science.gov (United States)

    Bolman, Lee G.; Deal, Terrence E.

    2002-01-01

    Describes five qualities of effective leaders: Focus, passion, wisdom, courage, and integrity. Asserts that these qualities are rooted in faith and soul. Uses Harry Potter and Beowulf stories to illustrate spiritual development. Describes four gifts leaders can bestow on others: Authorship, love or caring, power, and significance. Authors wrote…

  16. Recyclization reactions leading to benzimidazoles

    International Nuclear Information System (INIS)

    Mamedov, Vakhid A; Murtazina, Anna M

    2011-01-01

    The published data on the recyclization reactions that afford benzimidazoles are generalized and systematized. Both classical and new methods of benzimidazole synthesis are considered. Attention is focused on the publications over the recent 10-15 years; of the earlier publications, only those unknown to the wide circle of chemists are analyzed.

  17. Recyclization reactions leading to benzimidazoles

    Science.gov (United States)

    Mamedov, Vakhid A.; Murtazina, Anna M.

    2011-05-01

    The published data on the recyclization reactions that afford benzimidazoles are generalized and systematized. Both classical and new methods of benzimidazole synthesis are considered. Attention is focused on the publications over the recent 10-15 years; of the earlier publications, only those unknown to the wide circle of chemists are analyzed.

  18. Effects of occupational lead exposure.

    Science.gov (United States)

    Wang, Y L; Lu, P K; Chen, Z Q; Liang, Y X; Lu, Q M; Pan, Z Q; Shao, M

    1985-01-01

    Fifty-three workers in a battery factory, 52 solderers in a television factory, and 50 embroidery workers (a reference group) were studied. The average air lead levels of the three workplaces were 0.578 mg/m3, 0.002 mg/m3, and 0.001 mg/m3, respectively. Adverse effects in terms of clinical manifestations and biochemical criteria were evident among the battery factory workers. A significant dose-response relationship existed between the toxic effects and the air lead levels. The solderers showed no apparent abnormalities in comparison with the embroidery workers. The early clinical manifestations were dysfunction of the central nervous system, indigestion, arthralgia, and myalgia in the extremities. A positive association was observed between the prevalence of fatigue, mild abdominal pain, and arthralgia and the blood lead (PbB), urinary lead (PbU), and zinc protoporphyrin (ZPP) levels. The symptomatic threshold values of PbB, PbU, and ZPP were 30 micrograms/dl (1.5 mumol/l), 0.045 mg/l (0.2 mumol/l), and 40 micrograms/dl (0.7 mumol/l), respectively. The PbB, PbU, free erythrocyte protoporphyrin, and ZPP levels and the blood aminolevulinic dehydratase ratio could be used as indicators of lead exposure, although ZPP is preferred for a preventive monitoring program. The motor and sensory conduction velocities of the median nerve were slower in the exposed groups than in the reference group. No effects on behavioral function were observed among the solderers.

  19. Gammatography of thick lead vessels

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Sundaram, V.M.

    1979-01-01

    Radiography, scintillation and GM counting and dose measurements using ionisation chamber equipment are commonly used for detecting flaws/voids in materials. The first method is mostly used for steel vessels and to a lesser extent thin lead vessels also and is essentially qualitative. Dose measuring techniques are used for very thick and large lead vessels for which high strength radioactive sources are required, with its inherent handling problems. For vessels of intermediate thicknesses, it is ideal to use a small strength source and a GM or scintillation counter assembly. At the Reactor Research Centre, Kalpakkam, such a system was used for checking three lead vessels of thicknesses varying from 38mm to 65mm. The tolerances specified were +- 4% variation in lead thickness. The measurements also revealed the non concentricity of one vessel which had a thickness varying from 38mm to 44mm. The second vessel was patently non-concentric and the dimensional variation was truly reproduced in the measurements. A third vessel was fabricated with careful control of dimensions and the measurements exhibited good concentricity. Small deviations were observed, attributable to imperfect bondings between steel and lead. This technique has the following advantages: (a) weaker sources used result in less handling problems reducing the personnel exposures considerably; (b) the sensitivity of the instrument is quite good because of better statistics; (c) the time required for scanning a small vessel is more, but a judicious use of a scintillometer for initial fast scan will help in reducing the total scanning time; (d) this method can take advantage of the dimensional variations themselves to get the calibration and to estimate the deviations from specified tolerances. (auth.)

  20. Deaths: Leading Causes for 2011.

    Science.gov (United States)

    Heron, Melonie

    2015-07-27

    This report presents final 2011 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements ‘‘Deaths: Final Data for 2011,’’ the National Center for Health Statistics’ annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2011. Causes of death classified by the International Classification of Diseases, 10th Revision (ICD–10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2011, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer’s disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2011 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission

  1. Deaths: Leading Causes for 2015.

    Science.gov (United States)

    Heron, Melonie

    2017-11-01

    Objectives-This report presents final 2015 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2015," the National Center for Health Statistics' annual report of final mortality statistics. Methods-Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2015. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. Results-In 2015, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Accidents (unintentional injuries); Cerebrovascular diseases; Alzheimer's disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2015 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without

  2. Deaths: leading causes for 2010.

    Science.gov (United States)

    Heron, Melonie

    2013-12-20

    This report presents final 2010 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements the Division of Vital Statistics' annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2010. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2010, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer's disease; Diabetes mellitus; Nephritis, nephrotic syndrome and nephrosis; Influenza and pneumonia; and Intentional self-harm (suicide). These 10 causes accounted for 75% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2010 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Necrotizing enterocolitis of newborn. Important variations in the leading causes of infant death are noted for the neonatal and post-neonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source

  3. Deaths: Leading Causes for 2013.

    Science.gov (United States)

    Heron, Melonie

    2016-02-16

    This report presents final 2013 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2013," the National Center for Health Statistics’ annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2013. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD–10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2013, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Accidents (unintentional injuries); Cerebrovascular diseases; Alzheimer’s disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). They accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2013 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Newborn affected by maternal complications of pregnancy; Sudden infant death syndrome; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as

  4. Deaths: Leading Causes for 2012.

    Science.gov (United States)

    Heron, Melonie

    2015-08-31

    This report presents final 2012 data on the 10 leading causes of death in the United States by age, sex, race, and Hispanic origin. Leading causes of infant, neonatal, and postneonatal death are also presented. This report supplements "Deaths: Final Data for 2012," the National Center for Health Statistics' annual report of final mortality statistics. Data in this report are based on information from all death certificates filed in the 50 states and the District of Columbia in 2012. Causes of death classified by the International Classification of Diseases, Tenth Revision (ICD-10) are ranked according to the number of deaths assigned to rankable causes. Cause-of-death statistics are based on the underlying cause of death. In 2012, the 10 leading causes of death were, in rank order: Diseases of heart; Malignant neoplasms; Chronic lower respiratory diseases; Cerebrovascular diseases; Accidents (unintentional injuries); Alzheimer's disease; Diabetes mellitus; Influenza and pneumonia; Nephritis, nephrotic syndrome and nephrosis; and Intentional self-harm (suicide). These causes accounted for 74% of all deaths occurring in the United States. Differences in the rankings are evident by age, sex, race, and Hispanic origin. Leading causes of infant death for 2012 were, in rank order: Congenital malformations, deformations and chromosomal abnormalities; Disorders related to short gestation and low birth weight, not elsewhere classified; Sudden infant death syndrome; Newborn affected by maternal complications of pregnancy; Accidents (unintentional injuries); Newborn affected by complications of placenta, cord and membranes; Bacterial sepsis of newborn; Respiratory distress of newborn; Diseases of the circulatory system; and Neonatal hemorrhage. Important variations in the leading causes of infant death are noted for the neonatal and postneonatal periods.

  5. Lead and Drinking Water from Private Wells

    Science.gov (United States)

    ... type=”submit” value=”Submit” /> Healthy Water Home Lead and Drinking Water from Private Wells Recommend on ... remove lead from my drinking water? What is lead? Lead is a naturally occurring bluish-gray metal ...

  6. ITB Berlin: The world's leading tourism fair

    Directory of Open Access Journals (Sweden)

    Đeri Lukrecija

    2010-01-01

    Full Text Available MICE is a significant segment of tourism industry. It is of great interest for exhibitors and visitors, as well as for host cities and organizers. ITB Berlin represents the world's leading travel trade show. This paper analyses the key trends of this event in the last five year period (from 2004 until 2008. Analyzed data was annually gathered by Gelzus Messe-Marktforschung GmbH. This research focused on exhibitors', trade visitors and private visitors' origin, age distribution of private visitors, exhibiting companies, exhibiting branches, interest for travel according to type and overall impression and outlook that was gathered through surveys at ITB Berlin. Data was collected in the period 2004-2008 and placed together to make a five year overview. The goal is to present a development of above mentioned values and to discover potential patterns and predict future trends for this tourism fair. .

  7. Potential uses of lead in nuclear waste disposal

    International Nuclear Information System (INIS)

    Goodwin, F.E.; Pool, K.H.; Westerman, R.E.; Pitman, S.G.; Telander, M.R.

    1991-01-01

    In order for lead to be considered as a nuclear waste packaging material, it must be shown that it has adequate corrosion resistance, and that it does not degrade the properties of other important structural or barrier elements in the waste package. The present work focused on determining (a) the corrosion resistance of commercial purity (CP) lead and a Pb-1.5% Sb alloy in irradiated, elevated-temperature tuff ground water environments; (b) the resistance of alloy 825, a candidate container alloy, to embrittlement by molten lead; and (c) the resistance of lead and the Pb-Sb alloy to localized (pitting, crevice) corrosion. The test results support the feasibility of using lead in nuclear waste containers

  8. Focusing: coming to the point in metamaterials

    Science.gov (United States)

    Guenneau, S.; Diatta, A.; McPhedran, R. C.

    2010-04-01

    This paper reviews some properties of lenses in curved and folded optical spaces. The point of the paper is to show some limitations of geometrical optics in the analysis of subwavelength focusing. We first provide a comprehensive derivation for the equation of geodesics in curved optical spaces, which is a tool of choice to design metamaterials in transformation optics. We then analyse the resolution of the image of a line source radiating in the Maxwell fisheye and the Veselago-Pendry slab lens. The former optical medium is deduced from the stereographic projection of a virtual sphere and displays a heterogeneous refractive index n(r) which is proportional to the inverse of 1 + r 2. The latter is described by a homogeneous, but negative, refractive index. It has been suggested that the fisheye makes a perfect lens without negative refraction [Leonhardt, Philbin arxiv:0805.4778v2]. However, we point out that the definition of super-resolution in such a heterogeneous medium should be computed with respect to the wavelength in a homogenised medium, and it is perhaps more adequate to talk about a conjugate image rather than a perfect image (the former does not necessarily contain the evanescent components of the source). We numerically find that both the Maxwell fisheye and a thick silver slab lens lead to a resolution close to λ/3 in transverse magnetic polarisation (electric field pointing orthogonal to the plane). We note a shift of the image plane in the latter lens. We also observe that two sources lead to multiple secondary images in the former lens, as confirmed from light rays travelling along geodesics of the virtual sphere. We further observe resolutions ranging from λ/2 to nearly λ/4 for magnetic dipoles of varying orientations of dipole moments within the fisheye in transverse electric polarisation (magnetic field pointing orthogonal to the plane). Finally, we analyse the Eaton lens for which the source and its image are either located within a unit

  9. Relational Leading and Dialogic Process

    DEFF Research Database (Denmark)

    Hansen, Lone Hersted

    The Ph.D. thesis contributes to a relational orientation to leading, emphasizing leadership as a shared, collaborative and co-creative activity. In this paradigm major emphasis is put on dialogue and interaction. Inspired by social constructionist ideas, the thesis considers approaches to learning...... and knowledge building as related to relational leading. The practices developed in the thesis research demonstrate that it is possible to create organizational learning and development through collaborative, dialogic practices in groups and teams, for instance combined with the use of roleplaying. In the work...... with the thesis, dialogically based practices inspired by action research with the aim to enhance collaborative knowledge building, reflexivity and dialogical skills in groups and teams were carried out, analyzed and documented. Participants included school principals, leaders of kindergartens, teachers...

  10. Leading Hadron Production at HERA

    Directory of Open Access Journals (Sweden)

    Buniatyan Armen

    2013-06-01

    Full Text Available Data from the recent measurements of very forward baryon and photon production with the H1 and ZEUS detectors at electron-proton collider HERA are presented and compared to the theoretical calculations and Monte Carlo models. Results are presented of the production of leading protons, neutrons and photons in deep inelastic scattering (ep → e' pX, ep → e'nX, ep → e'γX as well as the leading neutron production in the photoproduction of dijets (ep → ejjXn. The forward baryon and photon results from the H1 and ZEUS Experiments are compared also with the models of the hadronic interactions of high energy Cosmic Rays. The sensitivity of the HERA data to the differences between the models is demonstrated.

  11. [Noroviruses: leading cause of gastroenteritis].

    Science.gov (United States)

    Delacour, H; Dubrous, P; Koeck, J L

    2010-04-01

    Although noroviruses were the first viral agents to be linked to gastrointestinal disease, they were long considered a secondary cause far behind rotaviruses. Development of molecular-based diagnostic techniques has provided clearer insight into the epidemiological impact of noroviruses that are now recognized not only as the leading cause of non-bacterial gastroenteritis outbreaks but also as an important cause of sporadic gastroenteritis in both children and adults. Norovirus infection is generally characterized by mild acute vomiting and diarrhea usually lasting for only a few days, but it can lead to more severe and potentially life-threatening symptoms in high-risk groups such as young children, elderly, and immunodeficient persons. It has been demonstrated that they are present in tropical countries. Molecular epidemiological studies have documented the great genetic diversity of noroviruses with regular emergence of variants. Since no vaccine is available, prevention on norovirus infection depends mainly on strict personal and community hygiene measures.

  12. Deformation properties of lead isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Tolokonnikov, S. V.; Borzov, I. N.; Lutostansky, Yu. S.; Saperstein, E. E., E-mail: saper43-7@mail.ru [National Research Center Kurchatov Institute (Russian Federation)

    2016-01-15

    The deformation properties of a long lead isotopic chain up to the neutron drip line are analyzed on the basis of the energy density functional (EDF) in the FaNDF{sup 0} Fayans form. The question of whether the ground state of neutron-deficient lead isotopes can have a stable deformation is studied in detail. The prediction of this deformation is contained in the results obtained on the basis of the HFB-17 and HFB-27 Skyrme EDF versions and reported on Internet. The present analysis reveals that this is at odds with experimental data on charge radii and magnetic moments of odd lead isotopes. The Fayans EDF version predicts a spherical ground state for all light lead isotopes, but some of them (for example, {sup 180}Pb and {sup 184}Pb) prove to be very soft—that is, close to the point of a phase transition to a deformed state. Also, the results obtained in our present study are compared with the predictions of some other Skyrme EDF versions, including SKM*, SLy4, SLy6, and UNE1. By and large, their predictions are closer to the results arising upon the application of the Fayans functional. For example, the SLy4 functional predicts, in just the same way as the FaNDF{sup 0} functional, a spherical shape for all nuclei of this region. The remaining three Skyrme EDF versions lead to a deformation of some light lead isotopes, but their number is substantially smaller than that in the case of the HFB-17 and HFB-27 functionals. Moreover, the respective deformation energy is substantially lower, which gives grounds to hope for the restoration of a spherical shape upon going beyond the mean-field approximation, which we use here. Also, the deformation properties of neutron-rich lead isotopes are studied up to the neutron drip line. Here, the results obtained with the FaNDF{sup 0} functional are compared with the predictions of the HFB-17, HFB-27, SKM*, and SLy4 Skyrme EDF versions. All of the EDF versions considered here predict the existence of a region where neutron

  13. String Formation Beyond Leading Colour

    CERN Document Server

    Christiansen, Jesper R.

    2015-08-03

    We present a new model for the hadronisation of multi-parton systems, in which colour correlations beyond leading $N_C$ are allowed to influence the formation of confining potentials (strings). The multiplet structure of $SU(3)$ is combined with a minimisation of the string potential energy, to decide between which partons strings should form, allowing also for "baryonic" configurations (e.g., two colours can combine coherently to form an anticolour). In $e^+e^-$collisions, modifications to the leading-colour picture are small, suppressed by both colour and kinematics factors. But in $pp$ collisions, multi-parton interactions increase the number of possible subleading connections, counteracting their naive $1/N_C^2$ suppression. Moreover, those that reduce the overall string lengths are kinematically favoured. The model, which we have implemented in the PYTHIA 8 generator, is capable of reaching agreement not only with the important $\\left(n_\\mathrm{charged})$ distribution but also with measured rates (and ra...

  14. Lead and cadmium in food

    International Nuclear Information System (INIS)

    Gliesmann, S.; Kruse, H.; Kriews, M.; Mangels, H.

    1992-08-01

    The amounts of lead and cadmium produced and processed in these days are considerable. As a result, our environment is increasingly polluted by heavy metals and industrial installations, motor vehicles or incinerating plants appear to be among the main culprits here. Air and water are the media permitting the entry of heavy metals into our natural environment where they accumulate in the soil and then gradually migrate into the plants. Their further transport in the food constitutes the third step in the environmental spread of heavy metals. The consumption of muscle and organ meats, of vegetables, fruits, canned food and drinking water is unavoidably associated with some ingestion of lead and cadmium. The degree to which they are taken up and stored in different tissues is determined by absorption properties and the nutritional state of the organism. Cadmium tends to accumulate in the kidneys, lead is mainly stored in the bones. A continuously increasing uptake finally results in health injuries that range from unspecific complaints to damaged kidneys or bones and disorders of liver function. Children and elderly people are at a particular risk here. The level of food contamination is such that screening for heavy metals must be rigorously carried out once appropriate legal thresholds have been set, which ought to be based on proven detrimental effects of lead and cadmium on our health and also take account of infants and children or any other risk groups, where particular caution must be exercised. It should be pointed out that such thresholds have so far not been determined. (orig./MG) [de

  15. Leading Indian Business-Groups

    Directory of Open Access Journals (Sweden)

    Maria Alexandrovna Vorobyeva

    2016-01-01

    Full Text Available The goal of this paper is to investigate the evolution of the leading Indian business-groups under the conditions of economical liberalization. It is shown that the role of modern business-groups in the Indian economy is determined by their high rate in the gross domestic product (GDP, huge overall actives, substantial pert in the e[port of goods and services, as well as by their activities in modern branch structure formatting, and developing labor-intensive and high-tech branches. They strongly influence upon economical national strategies, they became a locomotive of internationalization and of transnationalization of India, the basis of the external economy factor system, the promoters of Indian "economical miracle" on the world scene, and the dynamical segment of economical and social development of modern India. The tendencies of the development of the leading Indian business groups are: gradual concentration of production in few clue sectors, "horizontal" structure, incorporation of the enterprises into joint-stock structure, attraction of hired top-managers and transnationaliziation. But against this background the leading Indian business-groups keep main traditional peculiarities: they mostly still belong to the families of their founders, even today they observe caste or communal relations which are the basis of their non-formal backbone tides, they still remain highly diversificated structures with weak interrelations. Specific national ambivalence and combination of traditions and innovations of the leading Indian business-groups provide their high vitality and stability in the controversial, multiform, overloaded with caste and confessional remains Indian reality. We conclude that in contrast to the dominant opinion transformation of these groups into multisectoral corporations of the western type is far from completion, and in the nearest perspective they will still possess all their peculiarities and incident social and economical

  16. Dual identities: organizational negotiation in STEM-focused Catholic schools

    Science.gov (United States)

    Kloser, Matthew; Wilsey, Matthew; Hopkins, Dawn W.; Dallavis, Julie W.; Lavin, Erin; Comuniello, Michael

    2017-06-01

    In the last decade, STEM-focused schools have opened their doors nationally in the hope of meeting students' contemporary educational needs. Despite the growth of these STEM-focused institutions, minimal research exists that follows how schools make a transition toward a STEM focus and what organizational structures are most conducive to a successful transition. The adoption of a STEM focus has clear implications for a school's organizational identity. For Catholic schools, the negotiation of a new STEM focus is especially complex, as Catholic schools have been shown to generally possess a distinct religious and cultural organizational identity. The adoption of a second, STEM-focused identity raises questions about whether and how these identities can coexist. Framed by perspectives on organizational identity and existing conceptualizations of the cultural and religious hallmarks of Catholic schools, this study utilizes a multiple-case study design to explore the organizational transition of four Catholic K-8 institutions to Catholic STEM-focused schools. These cases demonstrate the particular challenges of negotiating multiple organizational identities. While variation existed in how the four schools accommodated these identities, the most promising environments for successful transition drew upon an aggregative model of identity negotiation, that is, when schools attended to both identities, but ensured that the original Catholic identity of the school remained foundational to all decisions. The least successful identity negotiations occurred when there was a lack of common understanding about what comprised a STEM-focused school, leading to minimal buy-in from stakeholders or when a school sought to make the transition for recruitment or marketing rather than mission-driven reasons. Discussion of the more successful identity aggregation provides a framework for schools within and beyond the religious sector that desire to adopt an additional STEM-focused

  17. How to conduct focus groups: researching group priorities through discussion.

    Science.gov (United States)

    1992-01-01

    Focus groups serve to uncover priorities and beliefs of a target group, but health project designers do not always take the time to seek this information beforehand. Focus groups also allow various local subgroups to communicate their concerns before the project starts. Focus groups can also breed ideas and dialogue that individual interviews cannot and they provide baseline information so managers can determine if attitudes or priorities have resulted from the project. Diverse people have different beliefs, e.g., women who have young children view oral rehydration therapy differently from women with no children. Project designers can use these basic differences to arrive at some conclusions about general attitudes. Focus group facilitators should have a discussion outline to help keep the group on the topic of concern. They should limit sessions to 60-90 minutes. Each focus groups should include 8-10 people. It is important to have members of various community subgroups in each group. Yet group designers should be careful not to include within the same group, those who may intimidate other people in the group, e.g., in situations where farmers depend on middlemen, farmers may not be open if middlemen are also in the focus group. Facilitators should launch each session with an attempt to encourage the members to be open and to feel comfortable. For example, in Malawi, a facilitator leads her focus group discussions with songs. Stories are another icebreaker. It is important that all focus groups centering around a certain project discuss the same topics. Facilitators need to stress to the group that all discussions are to be kept confidential. The designers should also carefully word the questions so that facilitators will not impart their bias. Facilitators should not direct the group to certain conclusions, but instead keep the discussions focused.

  18. Tevatron HTS power lead test

    International Nuclear Information System (INIS)

    Feher, S.; Carcagno, R.; Orris, D.; Pischalnikov, Y.; Sylvester, C.; Tartaglia, M.; Tompkins, J.C.

    2004-01-01

    Two pairs of ASC 6 kA power leads developed for the Tevatron were successfully tested at Fermilab at over-current conditions. Stable operation was achieved while operating at a current of 9.56 kA for five hours and while continuously ramping between 0-9.56 kA at a ramp rate of 200 A/s for one hour. The minimum required liquid nitrogen flow rate was measured to be 1.5 g/s at 10 kA. After ramping up to 10 kA at 200A/s, it took only 15 minutes to stabilize the upper copper section of the lead with a flow of 1.8 g/s of liquid nitrogen vapor. Testing under extreme operating conditions--270-370 kPa liquid nitrogen vapor pressure and over 0.1 T external magnetic field--demonstrated that the HTS part of the lead can safely operate in the current sharing mode and that this design has large operating margin

  19. The LHC Lead Injector Chain

    CERN Document Server

    Beuret, A; Blas, A; Burkhardt, H; Carli, Christian; Chanel, M; Fowler, A; Gourber-Pace, M; Hancock, S; Hourican, M; Hill, C E; Jowett, John M; Kahle, K; Küchler, D; Lombardi, A M; Mahner, E; Manglunki, Django; Martini, M; Maury, S; Pedersen, F; Raich, U; Rossi, C; Royer, J P; Schindl, Karlheinz; Scrivens, R; Sermeus, L; Shaposhnikova, Elena; Tranquille, G; Vretenar, Maurizio; Zickler, T

    2004-01-01

    A sizeable part of the LHC physics programme foresees lead-lead collisions with a design luminosity of 1027 cm-2 s-1. This will be achieved after an upgrade of the ion injector chain comprising Linac3, LEIR, PS and SPS machines [1,2]. Each LHC ring will be filled in 10 min by almost 600 bunches, each of 7×107 lead ions. Central to the scheme is the Low Energy Ion Ring (LEIR) [3,4], which transforms long pulses from Linac3 into high-brilliance bunches by means of multi-turn injection, electron cooling and accumulation. Major limitations along the chain, including space charge, intrabeam scattering, vacuum issues and emittance preservation are highlighted. The conversion from LEAR (Low Energy Antiproton Ring) to LEIR involves new magnets and power converters, high-current electron cooling, broadband RF cavities, and a UHV vacuum system with getter (NEG) coatings to achieve a few 10-12 mbar. Major hardware changes in Linac3 and the PS are also covered. An early ion scheme with fewer bunches (but each at nominal...

  20. Leading Change with Slogans: Border University in Transition

    Science.gov (United States)

    Gonzales, Leslie D.; Pacheco, Arturo

    2012-01-01

    In this study, the authors problematize the use of slogans when it comes to leading major organizational change. Specifically, they outline the slogans that Border University leaders used to explain and justify the university's transition from a regional, primarily teaching-focused university to an aspiring nationally recognized, Tier One research…

  1. Leading Change: How Boards and Presidents Build Exceptional Academic Institutions

    Science.gov (United States)

    MacTaggart, Terrence

    2011-01-01

    In a time of transformation in higher education, "Leading Change: How Boards and Presidents Build Exceptional Institutions" fills a significant void in leadership literature and focuses on the changing level of board engagement. This book examines 18 institutions, across the spectrum of higher education, at which the board played a…

  2. Packaging and transportation of radioactively contaminated lead

    International Nuclear Information System (INIS)

    Gleason, Eugene; Holden, Gerard

    2007-01-01

    Under the management of the Nuclear Decommissioning Authority (NDA) the government of the United Kingdom has launched an ambitious program to remediate the nation's nuclear waste legacy. Over a twenty-five year period NDA plans to decommission several first generation nuclear power plants and other radioactive facilities. The use innovative, safe 'fit for purpose' technologies will be a major part of this complex program. This paper will present a case study of a recently completed project undertaken in support of the nuclear decommissioning activities at the Sellafield site in the United Kingdom. The focus is on an innovative application of new packaging technology developed for the safe transportation of radioactively contaminated lead objects. Several companies collaborated on the project and contributed to its safe and successful conclusion. These companies include British Nuclear Group, Gravatom Engineering, W. F. Bowker Transport, Atlantic Container Lines, MHF Logistical Solutions and Energy Solutions. New containers and a new innovative inter-modal packaging system to transport the radioactive lead were developed and demonstrated during the project. The project also demonstrated the potential contribution of international nuclear recycling activities as a safe, economic and feasible technical option for nuclear decommissioning in the United Kingdom. (authors)

  3. Organizational change, patient-focused care: an Australian perspective.

    Science.gov (United States)

    Braithwaite, J

    1995-08-01

    Hospitals throughout the world are attempting to improve organizational performance through a variety of means. The focus in this paper is on a leading teaching hospital in Australia for a review of current management strategy. In a time of shrinking resources, management adopted a multi-faceted change management program including restructuring the organization, becoming more patient-focused via a product-line management approach and emphasising efficiency and cost-reduction measures. The next stage in management thinking is to place greater emphasis on patient-focused care. It is concluded this has the propensity to yield substantial further benefits, including improved financial and quality of care outcomes, in the Australian as well as the British and wider Organization for Economic Co-operation and Development (OECD) context. 'Professionally, we have committed ourselves to creating caring environments that promote healing. We cannot meet this goal until we make a commitment to be patient-focused and give up being nurse-focused or facility-focused' (Kerfort and LeClair, 1991). 'In a customer-driven [organization], the distribution of roles is different. The organization is decentralized, with responsibility delegated to those who until now have comprised the order-obeying bottom level of the pyramid. The traditional, hierarchical corporate structure, in other words, is beginning to give way to a flattened, more horizontal structure' (Carlzon, 1987).

  4. Night Vision Goggles Objectives Lens Focusing Methodology

    National Research Council Canada - National Science Library

    Pinkus, Alan; Task, H. L

    2000-01-01

    ...: interpupillary distance, tilt, eye relief, height, eyepiece and objective lens focus. Currently, aircrew use a Hoffman 20/20 test unit to pre-focus their NVG objective lenses at optical infinity before boarding their aircraft...

  5. Natural convection in enclosures containing lead-bismuth and lead

    International Nuclear Information System (INIS)

    Dzodzo, M.; Cuckovic-Dzodzo, D.

    2001-01-01

    The design of liquid metal reactors such as Encapsulated Nuclear Heat Source (ENHS) which are based predominantly on the flow generated by natural convection effects demands knowledge of velocity and temperature fields, distribution of the local Nusselt numbers and values of the average Nusselt numbers for small coolant velocity regimes. Laminar natural convection in rectangular enclosures with different aspect ratios, containing lead-bismuth and lead is studied numerically in this paper. The numerical model takes into account variable properties of the liquid metals. The developed correlation for average Nusselt numbers is presented. It is concluded that average Nusselt numbers are lower than in 'normal' fluids (air, water and glycerol) for the same values of Rayleigh numbers. However, the heat flux, which can be achieved, is greater due to the high thermal conductivity of liquid metals. Some specific features of the flow fields generated by natural convection in liquid metals are presented. Their consequences on the design of heat exchangers for liquid metals are discussed. An application of the obtained results to the design of a new type of steam generator, which integrates the intermediate heat exchanger and secondary pool functions of the ENHS reactor, is presented. (authors)

  6. Self-focusing in laser produced spark

    International Nuclear Information System (INIS)

    Bakos, J.S.; Foeldes, I.B.

    1983-05-01

    The self-focusing effect appearing in different phases of development of laser produced breakdown plasma in air is investigated. Self-focusing during the ionization process is demonstrated. Thermal self-focusing was observed in the later stage of the plasma development at moderate light intensities. Plasma development was investigated by forward and side scattering of the laser light in the plasma. A crossed beam experiment gave evidence of the thermal mechanism of self-focusing. (author)

  7. Near-field flat focusing mirrors

    Science.gov (United States)

    Cheng, Yu-Chieh; Staliunas, Kestutis

    2018-03-01

    This article reviews recent progress towards the design of near-field flat focusing mirrors, focusing/imaging light patterns in reflection. An important feature of such flat focusing mirrors is their transverse invariance, as they do not possess any optical axis. We start with a review of the physical background to the different focusing mechanisms of near- and far-field focusing. These near-field focusing devices like flat lenses and the reviewed near-field focusing mirrors can implement planar focusing devices without any optical axis. In contrast, various types of far-field planar focusing devices, such as high-contrast gratings and metasurfaces, unavoidably break the transverse invariance due to their radially symmetrical structures. The particular realizations of near-field flat focusing mirrors including Bragg-like dielectric mirrors and dielectric subwavelength gratings are the main subjects of the review. The first flat focusing mirror was demonstrated with a chirped mirror and was shown to manage an angular dispersion for beam focusing, similar to the management of chromatic dispersion for pulse compression. Furthermore, the reviewed optimized chirped mirror demonstrated a long near-field focal length, hardly achieved by a flat lens or a planar hyperlens. Two more different configurations of dielectric subwavelength gratings that focus a light beam at normal or oblique incidence are also reviewed. We also summarize and compare focusing performance, limitations, and future perspectives between the reviewed flat focusing mirrors and other planar focusing devices including a flat lens with a negative-index material, a planar hyperlens, a high-contrast grating, and a metasurface.

  8. Correlations in particle production in proton-lead and lead-lead collisions at the LHC

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00361447

    In high-energy heavy-ion collisions at the Large Hadron Collider (LHC), a hot and dense state of matter called the Quark-Gluon Plasma (QGP) is formed. The initial collision geometry and the subsequent expansion during the QGP stage result in the correlations of produced particles, through which the properties of the QGP can be investigated. Two analyses based on the geometrical correlations of produced particles, one in proton-lead (p–Pb) collisions and the other in lead-lead (Pb–Pb) collisions, are presented in this thesis. The data analyzed in this thesis were collected with the ALICE detector at the LHC in p– Pb collisions at a nucleon–nucleon center-of-mass energy of 5.02 TeV, and Pb–Pb collisions at a nucleon–nucleon center-of-mass energy of 2.76 TeV. In the forward-central two-particle correlation analysis in p–Pb collisions, two-particle an- gular correlations between trigger particles in the forward pseudorapidity range (2.5 < |η| < 4.0) and associated particles in the central ran...

  9. Leading Baryon Production at HERA

    International Nuclear Information System (INIS)

    Dodonov, V.; Schmitt, S.

    2009-01-01

    The production of highly energetic forward neutrons has been studied in deep-inelastic scattering. The data were taken with the H1 detector at HERA in the years 2006-2007 and correspond to an integrated luminosity of 117 pb -1 . Semi-inclusive cross sections have been measured in the kinematic region 4 2 2 , 0.7*10 -4 -1 and the fractional momentum of the neutron 0.3 L T and compared to the predictions of models of leading neutron production. Differential cross sections for dijet photoproduction and in association with a leading neutron have been measured in the reaction e + p → e + jet jet X n with the ZEUS detector at HERA using an integrated luminosity of 40pb -1 . The data are consistent with a simple pion exchange model. The ratio of the neutron-tagged and dijet cross sections show violations of factorization of the lepton and photon vertices which can be explained by kinematic effects constraining the phase space for neutron production. Normalised double-differential leading-neutron cross sections have been measured in dijet photoproduction for the first time. The distributions can be fully characterised by only two energy dependent parameters extracted from fits to the data. Absorption effects were studied by comparing the dijet photoproduction measurements and similar results in deep inelastic scattering. No clear effect, not related to kinematics, was observed. In a resolved-enriched dijet photoproduction sample, significantly fewer neutrons were seen than for direct. This depletion can also be accounted for by kinematic constraints. The semi-inclusive reaction e + p → e + X p was studied with the ZEUS detector at HERA using an integrated luminosity of 12.8 pb -1 . The final state proton, which was detected with the ZEUS leading proton spectrometer, carried a large fraction of the incoming proton energy, x L > 0.32, and its transverse momentum squared satisfied p T 2 2 ; the exchanged photon virtuality, Q 2 , was greater than 3 GeV 2 and the range of

  10. The art of leading meetings.

    Science.gov (United States)

    English, C B

    1987-05-01

    The ability to skillfully lead meetings can contribute to a manager's effectiveness. There are four types of meetings, each serving different needs and requiring different leadership. A manager must know when to hold meetings, what leadership style is appropriate, how and when to use participative management, and how to facilitate a consensus. Considerable planning must be done before a meeting is held. Various leadership and communication skills are required to effectively open, conduct, and close a meeting. Finally, the leader needs to know how to deal with participants who become problems.

  11. Lead-nickel electrochemical batteries

    CERN Document Server

    Glaize, Christian

    2012-01-01

    The lead-acid accumulator was introduced in the middle of the 19th Century, the diverse variants of nickel accumulators between the beginning and the end of the 20th Century. Although old, these technologies are always very present on numerous markets. Unfortunately they are still not used in optimal conditions, often because of the misunderstanding of the internal electrochemical phenomena.This book will show that batteries are complex systems, made commercially available thanks to considerable amounts of scientific research, empiricism and practical knowledge. However, the design of

  12. Lead reactor strategy economical analysis

    International Nuclear Information System (INIS)

    Ciotti, Marco

    2013-01-01

    Conclusions: • A first attempt to evaluate LFR power plant electricity production cost has been performed; • Electricity price is similar to Gen III + plants; • The estimation accuracy is probably low; • Possible costs reduction could arise from coolant characteristics that may improve safety and simplicity by design; • Accident perception, not acceptable by public opinion, may be changed with low potential energy system (non exploding coolant); • Sustainability improvement could open to a better Public acceptance, depending on us. • Problems may arise in coupling a high capital cost low fuel cost plant in a grid with large amount of intermittent sources with priority dispatch. • Lead fast reactors can compete

  13. Soft mode of lead zirconate

    International Nuclear Information System (INIS)

    Pan'ko, G.F.; Prisedskij, V.V.; Klimov, V.V.

    1983-01-01

    Anisotropic diffusional scattering of electrons on PbZrO 3 crystal in the temperature range of phase transition has been recorded. As a result of its analysis it has been established that in lead zirconate the rotational vibrational mode G 25 plays the role of soft mode. The experiment is carried out using PbZrO 3 monocrystals in translucent electron microscope EhM-200, operating in the regime of microdiffraction at accelerating voltage of 150 kV and beam current 50 μA; sample preparation is realized using the method of shearing and fragmentation

  14. Flow over 50º Delta Wings with Different Leading-Edge Radii

    NARCIS (Netherlands)

    Verhaagen, N.G.

    2011-01-01

    The experimental study focuses on the effects of the leading-edge radius on the flow over 50º swept delta wing models. Three models were tested, one model has a sharp leading edge and two other have a semi-circular leading edge of different radius. The vortical flow on and off the surface of the

  15. Seveso directive: the leading innovations

    International Nuclear Information System (INIS)

    Cozzani, V.; Zanelli, S.

    1998-01-01

    Directive 96/82/EC on the control of major accident hazards caused by dangerous substances, also known as 'Seveso-II' Directive, was adopted by the European Council on December 1996. The member states of the European Community shall bring into force the Directive not later than February 1999. Some innovative aspects of the Directive are discussed. In particular, this paper focuses on the effects of the new criteria for the identification of establishments to which the Directive obligations will apply and for land use planning in the vicinity of the establishments [it

  16. Analysis and modeling of "focus" in context

    DEFF Research Database (Denmark)

    Hovy, Dirk; Anumanchipalli, Gopala; Parlikar, Alok

    2013-01-01

    This paper uses a crowd-sourced definition of a speech phenomenon we have called focus. Given sentences, text and speech, in isolation and in context, we asked annotators to identify what we term the focus word. We present their consistency in identifying the focused word, when presented with text...... or speech stimuli. We then build models to show how well we predict that focus word from lexical (and higher) level features. Also, using spectral and prosodic information, we show the differences in these focus words when spoken with and without context. Finally, we show how we can improve speech synthesis...

  17. Synthetic focusing in ultrasound modulated tomography

    KAUST Repository

    Kuchment, Peter; Kunyansky, Leonid

    2010-01-01

    Several hybrid tomographic methods utilizing ultrasound modulation have been introduced lately. Success of these methods hinges on the feasibility of focusing ultrasound waves at an arbitrary point of interest. Such focusing, however, is difficult to achieve in practice. We thus propose a way to avoid the use of focused waves through what we call synthetic focusing, i.e. by reconstructing the would-be response to the focused modulation from the measurements corresponding to realistic unfocused waves. Examples of reconstructions from simulated data are provided. This non-technical paper describes only the general concept, while technical details will appear elsewhere. © 2010 American Institute of Mathematical Sciences.

  18. Synthetic focusing in ultrasound modulated tomography

    KAUST Repository

    Kuchment, Peter

    2010-09-01

    Several hybrid tomographic methods utilizing ultrasound modulation have been introduced lately. Success of these methods hinges on the feasibility of focusing ultrasound waves at an arbitrary point of interest. Such focusing, however, is difficult to achieve in practice. We thus propose a way to avoid the use of focused waves through what we call synthetic focusing, i.e. by reconstructing the would-be response to the focused modulation from the measurements corresponding to realistic unfocused waves. Examples of reconstructions from simulated data are provided. This non-technical paper describes only the general concept, while technical details will appear elsewhere. © 2010 American Institute of Mathematical Sciences.

  19. String formation beyond leading colour

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, Jesper R. [Department of Astronomy and Theoretical Physics, Lund University,Sölvegatan 14, Lund (Sweden); Theoretical Physics, CERN,CH-1211, Geneva 23 (Switzerland); Skands, Peter Z. [Theoretical Physics, CERN,CH-1211, Geneva 23 (Switzerland); School of Physics and Astronomy, Monash University,VIC-3800 (Australia)

    2015-08-03

    We present a new model for the hadronisation of multi-parton systems, in which colour correlations beyond leading N{sub C} are allowed to influence the formation of confining potentials (strings). The multiplet structure of SU(3) is combined with a minimisation of the string potential energy, to decide between which partons strings should form, allowing also for “baryonic” configurations (e.g., two colours can combine coherently to form an anticolour). In e{sup +}e{sup −}collisions, modifications to the leading-colour picture are small, suppressed by both colour and kinematics factors. But in pp collisions, multi-parton interactions increase the number of possible subleading connections, counteracting their naive 1/N{sub C}{sup 2} suppression. Moreover, those that reduce the overall string lengths are kinematically favoured. The model, which we have implemented in the PYTHIA 8 generator, is capable of reaching agreement not only with the important 〈p{sub ⊥}〉(n{sub charged}) distribution but also with measured rates (and ratios) of kaons and hyperons, in both ee and pp collisions. Nonetheless, the shape of their p{sub ⊥} spectra remains challenging to explain.

  20. Lead -- supply/demand outlook

    International Nuclear Information System (INIS)

    Schnull, T.

    1999-01-01

    As Japan goes--so goes the world. That was the title of a recent lead article in The Economist that soberly discussed the potential of much more severe global economic problems occurring, if rapid and coordinated efforts were not made to stabilize the economic situation in Asia in general, and in Japan in particular. During the first 6 months of last year, commodity markets reacted violently to the spreading economic problems in Asia. More recent currency and financial problems in Russia have exacerbated an already unpleasant situation. One commodity after another--including oil, many of the agricultural commodities, and each of the base metals--have dropped sharply in price. Many are now trading at multiyear lows. Until there is an overall improvement in the outlook for these regions, sentiment will likely continue to be negative, and metals prices will remain under pressure. That being said, lead has maintained its value better than many other commodities during these difficult times, finding support in relatively strong fundamentals. The author takes a closer look at those supply and demand fundamentals, beginning with consumption

  1. All roads lead to Meyrin

    CERN Multimedia

    Communication locale

    2011-01-01

    Tous les chemins mènent à Meyrin - All roads lead to Meyrin From 29 September to 16 October, 2011, come to the Salle Antoine Verchère in Meyrin for Tous les chemins mènent à Meyrin. The celebration will include an exposition as well as a theatrical performance about Meyrin, the first satellite city in Switzerland. With the help of the memories and testimonies from the people of Meyrin, Tous les chemins mènent à Meyrin is putting the collective memories of the commune on display. It is an occasion for everyone, whether you're from near or far, to find out how all the roads lead to Meyrin.  Salle Antoine-Verchère Route de Meyrin 294 – 1217 Meyrin Tram 18 – Stop: Meyrin Village Thursdays / Fridays / Saturdays at 8pm Sundays at 5pm Regular ticket: CHF 15.- Concession ticket (students, chômeurs, AVS, AI): CHF 12.- Children up to 16: CHF 10.- Family ticket: CHF 35.-

  2. Finland's leading natural gas company

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    The ownership structure of Finland's leading natural gas company, Gasum, changed fundamentally in 1999, and the company is now no longer a subsidiary of Fortum Corporation. 'Our new strong and broad ownership base will enable us to develop the natural gas business and pipeline network in Finland in response to the requirements of our Finnish customers', says Antero Jaennes, Gasum's Chairman and CEO, who stresses that Gasum is committed to remaining the leading developer of the Finnish natural gas market and the number-one gas supplier. Natural gas usage in Finland in 1999 totalled 3.9 billion m 3 (38.7 TWh), unchanged from 1998. Natural gas accounted for 11% of Finland's total primary energy need, as it did in 1998. The proportion of natural gas used in district heating rose by 2% to 36%, and moved down 2% in power generation to 10%. Industry's use of natural gas fell 1% to 17%. 75% of natural gas was used in combined heat and power (CHP) generation in industry and district heating. In 2000, Gasum expects to sell 4 billion m 3 of natural gas (40 TWh)

  3. Recycling abandoned lead battery sites

    International Nuclear Information System (INIS)

    Montgomery, A.H.

    1993-01-01

    In the past, automobile batteries were recycled principally for their lead content. The waste generated at battery wrecking facilities consisted of spent acid, crushed casings (ebonite and plastic), and where secondary smelting was involved, matte, slag, and carbon from the smelting process. These waste products were generally disposed in an on-site in a landfill or stored in piles. If the facility shut down because further commercial operations were not financially viable, the waste piles remained to be addressed at a later date through remedial action or reclamation programs. There are many of these facilities in the US. Nationally, about 28 sites have been discovered by the US Environmental Protection Agency (EPA) under the Superfund program and are under investigation or administrative orders for remedial action. A major remediation effort is now underway at the Gould Superfund Site in Portland, Oregon, which was operated as a secondary smelting facility between 1949 and 1981. This paper describes the nature of the contamination at the Gould site and the work conducted by Canonie Environmental Services Corp. (Canonie) to develop a process which would treat the waste from battery wrecking operations and produce revenue generating recyclable products while removing the source contamination (lead) from the site. The full-scale commercial plant is now operating and is expected to achieve a throughput rate of between 200 and 250 tons per day in the coming weeks

  4. Lead pollution, disease, and behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Bryce-Smith, D; Waldron, H A

    1974-01-01

    Sources and health effects of atmospheric lead pollution are reviewed. Most of the Pb in gasoline is emitted in the exhaust gases as an aerosol containing particles of inorganic Pb. Some organic Pb is present, but the amount is usually less than 10% of the total. The size of these particles (0.18 to 0.90 micron) ensures maximum pulmonary penetration and absorption. The fallout of airborne particles produces very high concentrations of Pb in city dust, both inside and outside houses. Unpolluted soil contains about 15 ppM Pb, but samples of city dust contain 1000 to 6000 ppM. A daily intake of as little as 30 mg of dust containing 3% Pb produces clinical Pb poisoning in a few months. There is clear evidence to support the thesis that current levels in the environment are capable of producing behavioral abnormalities of types associated with educational disorders and delinquency, and also evidence that delinquents tend to have abnormal lead metabolism.

  5. What is lead-based paint?

    International Nuclear Information System (INIS)

    Vernon, L.S.

    1994-01-01

    The number of variety of lead-abatement regulations and requirements make it difficult and confusing to identify and properly respond to dangerous levels of lead in every situation. Definitions of ''lead-based paint'' and three test methods for lead detection are described to help determine when and how to test for the presence of lead

  6. [Pre-verbality in focusing and the need for self check. An attempt at "focusing check"].

    Science.gov (United States)

    Masui, T; Ikemi, A; Murayama, S

    1983-06-01

    Though the Focusing process is not entirely non-verbal, in Focusing, careful attention is paid by the Focuser and the Listener to the pre-verbal experiential process. In other words, Focusing involves attending to the felt sense that is not easily expressed in words immediately. Hence, during the process of learning to Focus, the Focusing teacher attempts to communicate the experiences of Focusing to the student which are not easily done by words. Due to such difficulties, the Focusing student may (and quite frequently does) mistake the experiential process in Focusing with other processes. Often, the felt sense can be confused with other phenomena such as "autogenic discharge". Also the Focuser may not stay with the felt sense and drift into "free association" or frequently, certain processes in "meditation" can be confused with Focusing. Therefore, there is a need for a "check" by which the Focusing student can confirm the Focusing experience for himself. For the Focusing student, such a "check" serves not only to confirm the Focusing process, but also an aid to learning Focusing. We will report here a "Focusing Check" which we developed by translating Eugene Gendlin's "Focusing Check" and making several modifications in it so that it will be more understandable to the Japanese. Along with the "Focusing Check" we developed, the authors discuss the need for such a check.

  7. Lead poisoning in small animals

    Energy Technology Data Exchange (ETDEWEB)

    Scott, H M

    1963-08-17

    During the period 1957 to 1959 a considerable number of dogs were seen which were suffering from colic. Colic is not normally a condition commonly encountered in the dog, and the number of cases seen was large in proportion to the number of dogs in the population concerned. A number of other dogs exhibited nervous signs which varied from symptoms of mild anxiety to exaggerated fits. There was a certain amount of overlapping between the 2 groups in that some cases which originally only showed signs of colic later progressed to the stage where they showed nervous symptoms. The following report deals with 28 cases of lead poisoning in dogs and cats which occurred at Broken Hill, Northern Rhodesia. 8 references, 4 tables.

  8. Anti-cancer Lead Molecule

    KAUST Repository

    Sagar, Sunil

    2014-04-17

    Derivatives of plumbagin can be selectively cytotoxic to breast cancer cells. Derivative `A` (Acetyl Plumbagin) has emerged as a lead molecule for testing against estrogen positive breast cancer and has shown low hepatotoxicity as well as overall lower toxicity in nude mice model. The toxicity of derivative `A` was determined to be even lower than vehicle control (ALT and AST markers). The possible mechanism of action identified based on the microarray experiments and pathway mapping shows that derivative `A` could be acting by altering the cholesterol-related mechanisms. The low toxicity profile of derivative `A` highlights its possible role as future anti-cancer drug and/or as an adjuvant drug to reduce the toxicity of highly toxic chemotherapeutic drugs

  9. Anti-cancer Lead Molecule

    KAUST Repository

    Sagar, Sunil; Kaur, Mandeep; Esau, Luke E.

    2014-01-01

    Derivatives of plumbagin can be selectively cytotoxic to breast cancer cells. Derivative `A` (Acetyl Plumbagin) has emerged as a lead molecule for testing against estrogen positive breast cancer and has shown low hepatotoxicity as well as overall lower toxicity in nude mice model. The toxicity of derivative `A` was determined to be even lower than vehicle control (ALT and AST markers). The possible mechanism of action identified based on the microarray experiments and pathway mapping shows that derivative `A` could be acting by altering the cholesterol-related mechanisms. The low toxicity profile of derivative `A` highlights its possible role as future anti-cancer drug and/or as an adjuvant drug to reduce the toxicity of highly toxic chemotherapeutic drugs

  10. Preliminary Hazard Classification of the 1714-N, Lead Storage

    International Nuclear Information System (INIS)

    Kerr, N. R.

    1999-01-01

    The 1714-N, -NA and -NB is a building segment that was deactivated under the N Area Deactivation Project. During the deactivation the building was designated as an area to store recycled or reused lead products. This document presents the Preliminary Hazard Classification (PHC) for the continued storage of lead products by Bechtel Hanford, Inc. (BHI). Two types of hazardous substances are the focus of this PHC: lead and residual radiological contamination. An evaluation contained in this PHC concludes that there is little risk from the remaining hazardous substances. It was further concluded that standard institutional controls that are implemented under the BHI contract provide adequate protection to people and the environment. No further safety analysis documentation is required for the continued lead storage

  11. Is Your Child Safe from Lead Poisoning?

    Centers for Disease Control (CDC) Podcasts

    In this podcast, Dr. Mary Jean Brown, chief of CDC's Lead Poisoning and Prevention Program, discusses the importance of testing children for lead poisoning, who should be tested, and what parents can do to prevent lead poisoning.

  12. Heavy flavour production in proton-lead and lead-lead collisions with LHCb

    Science.gov (United States)

    Winn, Michael

    2017-11-01

    The LHCb experiment offers the unique opportunity to study heavy-ion interactions in the forward region (2 kinematic domain complementary to the other 3 large experiments at the LHC. The detector has excellent capabilities for reconstructing quarkonia and open charm states, including baryons, down to zero pT. It can separate the prompt and displaced charm components. In pPb collisions, both forward and backward rapidities are covered thanks to the possibility of beam reversal. Results include measurements of the nuclear modification factor and forward-backward ratio for charmonium, open charm and bottomonium states. These quantities are sensitive probes for nuclear effects in heavy flavour production. Perspectives are given with the large accumulated luminosity during the 2016 pPb run at the LHC. In 2015, LHCb participated successfully for the first time in the PbPb data-taking. The status of the forward prompt J/ψ nuclear modification factor measurement in lead-lead collisions is discussed.

  13. Thermal self-focusing at oblique incidence

    International Nuclear Information System (INIS)

    Craxton, R.S.; McCrory, R.L.

    1984-03-01

    Thermal self-focusing at oblique incidence has been investigated in two-dimensional line-focus geometry using the Eulerian hydrodynamics simulation code SAGE. The laser beam interacts with a long-scale-length preformed plasma with an expontial density profiele. Questions to be addressed include: (1) What happens when a self-focusing channel reaches the turning point of the incident rays, and (2) Does the unabsorbed light return in the specular direction or back along the channel. A comparison is also made between thermal self-focusing at normal incidence in cylindrical and line-focus geometries: in cylindrical geometry the self-focusing mechanism is enhanced by the relative ease with which plasma may be expelled from a small cylindrical channel

  14. The identification of lead ammunition as a source of lead exposure in First Nations: The use of lead isotope ratios

    International Nuclear Information System (INIS)

    Tsuji, Leonard J.S.; Wainman, Bruce C.; Martin, Ian D.; Sutherland, Celine; Weber, Jean-Philippe; Dumas, Pierre; Nieboer, Evert

    2008-01-01

    The use of lead shotshell to hunt water birds has been associated with lead-contamination in game meat. However, evidence illustrating that lead shotshell is a source of lead exposure in subsistence hunting groups cannot be deemed definitive. This study seeks to determine whether lead shotshell constitutes a source of lead exposure using lead isotope ratios. We examined stable lead isotope ratios for lichens, lead shotshell and bullets, and blood from residents of Fort Albany and Kashechewan First Nations, and the City of Hamilton, Ontario, Canada. Data were analyzed using ANOVA and regression analyses. ANOVA of isotope ratios for blood revealed significant differences with respect to location, but not sex. Hamilton differed from both Kashechewan and Fort Albany; however, the First Nations did not differ from each other. ANOVA of the isotope ratios for lead ammunition and lichens revealed no significant differences between lichen groups (north and south) and for the lead ammunition sources (pellets and bullets). A plot of 206 Pb/ 204 Pb and 206 Pb/ 207 Pb values illustrated that lichens and lead ammunition were distinct groupings and only the 95% confidence ellipse of the First Nations group overlapped that of lead ammunition. In addition, partial correlations between blood-lead levels (adjusted for age) and isotope ratios revealed significant (p 206 Pb/ 204 Pb and 206 Pb/ 207 Pb, and a significant negative correlation for 208 Pb/ 206 Pb, as predicted if leaded ammunition were the source of lead exposure. In conclusion, lead ammunition was identified as a source of lead exposure for First Nations people; however, the isotope ratios for lead shotshell pellets and bullets were indistinguishable. Thus, lead-contaminated meat from game harvested with lead bullets may also be contributing to the lead body burden

  15. Needs of Non Energy-Focused Contractors

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, C.

    2012-12-01

    To better understand the informational needs of non energy-focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

  16. Needs of Non-Energy Focused Contractors

    Energy Technology Data Exchange (ETDEWEB)

    Liakus, C. [Building Media and the Building America Retrofit Alliance (BARA), Wilmington, DE (United States)

    2012-12-01

    To better understand the informational needs of non-energy focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

  17. Suppression of radiation excitation in focusing environment

    International Nuclear Information System (INIS)

    Huang, Z.; Ruth, R.D.

    1996-12-01

    Radiation damping and quantum excitation in an electron damping ring and a straight focusing channel are reviewed. They are found to be the two limiting cases in the study of a general bending and focusing combined system. In the intermediate regime where the radiation formation length is comparable to the betatron wavelength, quantum excitation can be exponentially suppressed by focusing field. This new regime may have interesting applications in the generation of ultra-low emittance beams

  18. Investigation and Evaluation of Children’s Blood Lead Levels around a Lead Battery Factory and Influencing Factors

    Directory of Open Access Journals (Sweden)

    Feng Zhang

    2016-05-01

    Full Text Available Lead pollution incidents have occurred frequently in mainland China, which has caused many lead poisoning incidents. This paper took a battery recycling factory as the subject, and focused on measuring the blood lead levels of environmental samples and all the children living around the factory, and analyzed the relationship between them. We collected blood samples from the surrounding residential area, as well as soil, water, vegetables. The atomic absorption method was applied to measure the lead content in these samples. The basic information of the generation procedure, operation type, habit and personal protect equipment was collected by an occupational hygiene investigation. Blood lead levels in 43.12% of the subjects exceeded 100 μg/L. The 50th and the 95th percentiles were 89 μg/L and 232 μg/L for blood lead levels in children, respectively, and the geometric mean was 94 μg/L. Children were stratified into groups by age, gender, parents’ occupation, distance and direction from the recycling plant. The difference of blood lead levels between groups was significant (p < 0.05. Four risk factors for elevated blood lead levels were found by logistic regression analysis, including younger age, male, shorter distance from the recycling plant, and parents with at least one working in the recycling plant. The rate of excess lead concentration in water was 6.25%, 6.06% in soil and 44.44% in leaf vegetables, which were all higher than the Chinese environment standards. The shorter the distance to the factory, the higher the value of BLL and lead levels in vegetable and environment samples. The lead level in the environmental samples was higher downwind of the recycling plant.

  19. Thermal self-focusing with multiple beams

    International Nuclear Information System (INIS)

    Craxton, R.S.; McCrory, R.L.

    1986-07-01

    Self-focusing in underdense plasmas in the presence of overlapping beams is of interest for multibeam laser-irradiation systems. The hydrodynamics/ray-tracing simulation code SAGE is used to model thermal self-focusing in two-dimensional line-focus geometry with beams incident obliquely at different angles. The conjecture that multiple overlapping beams may suppress self-focusing is investigated for parameters appropriate to reactor-sized targets; in particular, the dependence upon intensity, scale length and pulse width is examined. While the full problem is three-dimensional, insight may be gained from two-dimensional simulations

  20. Automatic focusing system of BSST in Antarctic

    Science.gov (United States)

    Tang, Peng-Yi; Liu, Jia-Jing; Zhang, Guang-yu; Wang, Jian

    2015-10-01

    Automatic focusing (AF) technology plays an important role in modern astronomical telescopes. Based on the focusing requirement of BSST (Bright Star Survey Telescope) in Antarctic, an AF system is set up. In this design, functions in OpenCV is used to find stars, the algorithm of area, HFD or FWHM are used to degree the focus metric by choosing. Curve fitting method is used to find focus position as the method of camera moving. All these design are suitable for unattended small telescope.

  1. Regulatory focus affects physician risk tolerance.

    Science.gov (United States)

    Veazie, Peter J; McIntosh, Scott; Chapman, Benjamin P; Dolan, James G

    2014-01-01

    Risk tolerance is a source of variation in physician decision-making. This variation, if independent of clinical concerns, can result in mistaken utilization of health services. To address such problems, it will be helpful to identify nonclinical factors of risk tolerance, particularly those amendable to intervention-regulatory focus theory suggests such a factor. This study tested whether regulatory focus affects risk tolerance among primary care physicians. Twenty-seven primary care physicians were assigned to promotion-focused or prevention-focused manipulations and compared on the Risk Taking Attitudes in Medical Decision Making scale using a randomization test. Results provide evidence that physicians assigned to the promotion-focus manipulation adopted an attitude of greater risk tolerance than the physicians assigned to the prevention-focused manipulation (p = 0.01). The Cohen's d statistic was conventionally large at 0.92. Results imply that situational regulatory focus in primary care physicians affects risk tolerance and may thereby be a nonclinical source of practice variation. Results also provide marginal evidence that chronic regulatory focus is associated with risk tolerance (p = 0.05), but the mechanism remains unclear. Research and intervention targeting physician risk tolerance may benefit by considering situational regulatory focus as an explanatory factor.

  2. FEMP Focus: 2011 Volume 20 Issue 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-04-05

    Department of Energy (DOE); Federal Energy Management Program; FEMP Focus Newsletter; December 2010; Alternative Financing, Guidance Documents, Recovery Act Technical Assistance, Training, Energy Awareness

  3. Brief Report: Effect of a Focused Imitation Intervention on Social Functioning in Children with Autism

    Science.gov (United States)

    Ingersoll, Brooke

    2012-01-01

    Imitation is an early skill thought to play a role in social development, leading some to suggest that teaching imitation to children with autism should lead to improvements in social functioning. This study used a randomized controlled trial to evaluate the effect of a focused imitation intervention on initiation of joint attention and…

  4. Leading Wave Amplitude of a Tsunami

    Science.gov (United States)

    Kanoglu, U.

    2015-12-01

    Okal and Synolakis (EGU General Assembly 2015, Geophysical Research Abstracts-Vol. 17-7622) recently discussed that why the maximum amplitude of a tsunami might not occur for the first wave. Okal and Synolakis list observations from 2011 Japan tsunami, which reached to Papeete, Tahiti with a fourth wave being largest and 72 min later after the first wave; 1960 Chilean tsunami reached Hilo, Hawaii with a maximum wave arriving 1 hour later with a height of 5m, first wave being only 1.2m. Largest later waves is a problem not only for local authorities both in terms of warning to the public and rescue efforts but also mislead the public thinking that it is safe to return shoreline or evacuated site after arrival of the first wave. Okal and Synolakis considered Hammack's (1972, Ph.D. Dissertation, Calif. Inst. Tech., 261 pp., Pasadena) linear dispersive analytical solution with a tsunami generation through an uplifting of a circular plug on the ocean floor. They performed parametric study for the radius of the plug and the depth of the ocean since these are the independent scaling lengths in the problem. They identified transition distance, as the second wave being larger, regarding the parameters of the problem. Here, we extend their analysis to an initial wave field with a finite crest length and, in addition, to a most common tsunami initial wave form of N-wave as presented by Tadepalli and Synolakis (1994, Proc. R. Soc. A: Math. Phys. Eng. Sci., 445, 99-112). We compare our results with non-dispersive linear shallow water wave results as presented by Kanoglu et al. (2013, Proc. R. Soc. A: Math. Phys. Eng. Sci., 469, 20130015), investigating focusing feature. We discuss the results both in terms of leading wave amplitude and tsunami focusing. Acknowledgment: The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 603839 (Project ASTARTE - Assessment, Strategy and Risk

  5. Possible Lead Free Nanocomposite Dielectrics for High Energy Storage Applications

    Directory of Open Access Journals (Sweden)

    Srinivas Kurpati

    2017-03-01

    Full Text Available There is an increasing demand to improve the energy density of dielectric capacitors for satisfying the next generation material systems. One effective approach is to embed high dielectric constant inclusions such as lead zirconia titanate in polymer matrix. However, with the increasing concerns on environmental safety and biocompatibility, the need to expel lead (Pb from modern electronics has been receiving more attention. Using high aspect ratio dielectric inclusions such as nanowires could lead to further enhancement of energy density. Therefore, the present brief review work focuses on the feasibility of development of a lead-free nanowire reinforced polymer matrix capacitor for energy storage application. It is expected that Lead-free sodium Niobate nanowires (NaNbO3 and Boron nitride will be a future candidate to be synthesized using simple hydrothermal method, followed by mixing them with polyvinylidene fluoride (PVDF/ divinyl tetramethyl disiloxanebis (benzocyclobutene matrix using a solution-casting method for Nanocomposites fabrication. The energy density of NaNbO3 and BN based composites are also be compared with that of lead-containing (PbTiO3/PVDF Nano composites to show the feasibility of replacing lead-containing materials from high-energy density dielectric capacitors. Further, this paper explores the feasibility of these materials for space applications because of high energy storage capacity, more flexibility and high operating temperatures. This paper is very much useful researchers who would like to work on polymer nanocomposites for high energy storage applications.

  6. Human geography of New Orleans' high-lead geochemical setting.

    Science.gov (United States)

    Campanella, Richard; Mielke, Howard W

    2008-12-01

    Previous soil lead studies in New Orleans focused on the geochemical footprint and its health impacts. This study examines the human geography of race, income, and age in pre-Katrina metropolitan New Orleans within the context of lead accumulation in soils. Sample points of soil lead data (n = 5,467) collected in 1998-2000 were mapped in a geographic information system (GIS), binned into 9 ranges, and queried by (1) 2000 Census racial demographic data, (2) 1999 median household income, and (3) 2000 age data. The absolute population generally declines as lead levels increase except at lead levels from 200-400 to 400-1,000 mg/kg when population increases; the African-American population comprises a disproportionate share of this cohort. The high-lead areas occur in the inner city, home to the largest populations of African-Americans in New Orleans. The mean household income curve indicates that lower economic groups are at risk to higher levels of lead. A total of 44,701 children under the age of 5 years, plus 123,579 children aged 5-17, lived in census block groups containing at least one sample point with over 100 mg/kg lead, and these include 23,124 and 64,064 young people, respectively, who live near at least one point over 400 mg/kg. Lead exposure affects a panoply of outcomes that influence the health and welfare of the community. Unless corrected, children are likely to return to the same or, because of lack of lead-safe practices during renovation, even higher exposure risks than before the flooding of New Orleans.

  7. Shorts due to diagnostic leads

    International Nuclear Information System (INIS)

    Ellis, J.F.; Lubell, M.S.; Pillsbury, R.D.; Shen, S.S.; Thome, R.J.; Walstrom, P.L.

    1985-01-01

    The superconducting toroidal field coils that are being tested in the Large Coil Test Facility (LCTF) are heavily instrumented. General Electric coil, a lead wire of an internal sensor became shorted across an estimated three or four turns of the pancake winding. This short occurred during the final stages of the winding fabrication and was not accessible for repair. Resistance, voltage gradient, and transient voltage decay measurements were performed to characterize the short and the magnetic damping of the large steel bobbin and outer structural ring. The 32-gage wire causing the short was estimated to be about 10 cm long, with a resistance of 55 mΩ. As a safety measure, we decided to burn out the shorted wire at room temperature before installing the coil in LCTF. Tests were made to determine the energy needed to vaporize a small wire. Computer calculations indicated that within the voltage limits set for the coil, it was not feasible to burn out the wire by rapidly dumping the coil from a low-current dc charge-up. We accomplished the burnout by applying 800 V at 3.25 A, and 60 Hz for about 1 s. Transient voltage decay measurements made after the burnout and compared with those made before the attempt confirmed that the short had indeed been opened

  8. Leading local politicians visit CERN

    CERN Multimedia

    2001-01-01

    Left to right:  Professor Maiani, Ernest Nycollin, Anne-Marie Comparini, and Jean Pépin surrounded by young PRAC. On the 13th of November leading local politicians : Mme Anne-Marie Comparini, Présidente du Conseil régional de Rhône-Alpes, M. Ernest Nycollin, Président du Conseil général de la Haute-Savoie et M. Jean Pépin, Président du Conseil général de l'Ain took part in a ceremony which featured the insertion of one of the first LHC magnets into its cryostat.  The department of l'Ain financed a large part of the contruction of building SMA 18 which will see intense activity during the assembly of LHC magnets over the next four years. The department of Haute-Savoie helped in the development of the ultrasonic welding machine for the superconducting cables and the conception of integrated circuits that will be used to measure temperature and pressure inside the magnets. T...

  9. Using Focus Group Research in Public Relations.

    Science.gov (United States)

    Grunig, Larissa A.

    1990-01-01

    Analyzes a recent instance of focus group research applied to a public relations case (rather than a marketing case). Reviews the advantages and disadvantages of this qualitative method, and describes the case of a county department of mental health relying on focus group research to help plan a program aimed at reducing the stigma of mental…

  10. Identifying Information Focuses in Listening Comprehension

    Science.gov (United States)

    Zhang, Hong-yan

    2011-01-01

    The study explains the process of learners' listening comprehension within Halliday's information theory in functional grammar, including the skills of identifying focuses while listening in college English teaching. Identifying information focuses in listening is proved to improve the students' communicative listening ability by the means of a…

  11. Plasma lenses for focusing relativistic electron beams

    International Nuclear Information System (INIS)

    Govil, R.; Wheeler, S.; Leemans, W.

    1997-01-01

    The next generation of colliders require tightly focused beams with high luminosity. To focus charged particle beams for such applications, a plasma focusing scheme has been proposed. Plasma lenses can be overdense (plasma density, n p much greater than electron beam density, n b ) or underdense (n p less than 2 n b ). In overdense lenses the space-charge force of the electron beam is canceled by the plasma and the remaining magnetic force causes the electron beam to self-pinch. The focusing gradient is nonlinear, resulting in spherical aberrations. In underdense lenses, the self-forces of the electron beam cancel, allowing the plasma ions to focus the beam. Although for a given beam density, a uniform underdense lens produces smaller focusing gradients than an overdense lens, it produces better beam quality since the focusing is done by plasma ions. The underdense lens can be improved by tapering the density of the plasma for optimal focusing. The underdense lens performance can be enhanced further by producing adiabatic plasma lenses to avoid the Oide limit on spot size due to synchrotron radiation by the electron beam. The plasma lens experiment at the Beam Test Facility (BTF) is designed to study the properties of plasma lenses in both overdense and underdense regimes. In particular, important issues such as electron beam matching, time response of the lens, lens aberrations and shot-to-shot reproducibility are being investigated

  12. Sparse Matrix for ECG Identification with Two-Lead Features

    Directory of Open Access Journals (Sweden)

    Kuo-Kun Tseng

    2015-01-01

    Full Text Available Electrocardiograph (ECG human identification has the potential to improve biometric security. However, improvements in ECG identification and feature extraction are required. Previous work has focused on single lead ECG signals. Our work proposes a new algorithm for human identification by mapping two-lead ECG signals onto a two-dimensional matrix then employing a sparse matrix method to process the matrix. And that is the first application of sparse matrix techniques for ECG identification. Moreover, the results of our experiments demonstrate the benefits of our approach over existing methods.

  13. Final focus systems for linear colliders

    International Nuclear Information System (INIS)

    Erickson, R.A.

    1987-11-01

    The final focus system of a linear collider must perform two primary functions, it must focus the two opposing beams so that their transverse dimensions at the interaction point are small enough to yield acceptable luminosity, and it must steer the beams together to maintain collisions. In addition, the final focus system must transport the outgoing beams to a location where they can be recycled or safely dumped. Elementary optical considerations for linear collider final focus systems are discussed, followed by chromatic aberrations. The design of the final focus system of the SLAC Linear Collider (SLC) is described. Tuning and diagnostics and steering to collision are discussed. Most of the examples illustrating the concepts covered are drawn from the SLC, but the principles and conclusions are said to be generally applicable to other linear collider designs as well. 26 refs., 17 figs

  14. Results from the Cooler and Lead Tests

    International Nuclear Information System (INIS)

    Green, Michael A.

    2010-01-01

    The report presents the results of testing MICE spectrometer magnet current leads on a test apparatus that combines both the copper leads and the high temperature superconducting (HTS) leads with a single Cryomech PT415 cooler and liquid helium tank. The current is carried through the copper leads from 300 K to the top of the HTS leads. The current is then carried through the HTS leads to a feed-through from the vacuum space to the inside of a liquid helium tank. The experiment allows one to measure the performance of both cooler stages along with the performance of the leads. While the leads were powered we measured the voltage drops through the copper leads, through the HTS leads, through spliced to the feed-through, through the feed-through and through the low-temperature superconducting loop that connects one lead to the other. Measurements were made using the leads that were used in spectrometer magnet 1A and spectrometer magnet 2A. These are the same leads that were used for Superbend and Venus magnets at LBNL. The IL/A for these leads was 5.2 x 10 6 m -1 . The leads turned out to be too long. The same measurements were made using the leads that were installed in magnet 2B. The magnet 2B leads had an IL/A of 3.3 x 10 6 A m -1 . This report discusses the cooler performance and the measured electrical performance of the lead circuit that contains the copper leads and the superconducting leads. All of the HTS leads that were installed in magnet 2B were current tested using this apparatus.

  15. Dietary exposure to lead in the Netherlands

    NARCIS (Netherlands)

    Boon PE; te Biesebeek JD; van Donkersgoed G; VVH; V&Z

    2017-01-01

    Uptake from the soil is the main route by which lead ends up in food. Lead in soil has its origin in both natural and anthropogenic sources. The lead concentration in food has decreased over the last decennia by the use of unleaded petrol and paint, and the replacement of lead water pipes.

  16. Women researchers lead wage hikes

    Science.gov (United States)

    Bell, Peter M.

    Women employed in the research and development fields in universities, government, and industry made substantial increases and lead men in salary gains in 1981, according to a far-reaching survey of 5000 respondents (Industrial Research and Development, April 1982). At the upper end, 20% of women researchers received salary increases of 14% or more, compared to 13% of the men. The raises were high in 1981; more than half the women in research and development had salary gains of over 9%.The employment picture for women in the scientific and technical fields is somewhat complicated by the affirmative efforts of hiring. More women were hired in 1981, and most newly hired women and men begin at the lowest salaries. This factor contributed to the reality that more women than men at the lower salary ranges received zero raises. However, according to the survey, this is not a trend, since the current efforts to add women in research fields are providing more rewards for women per amount of experience than for men: “…women working in R&D have far less experience than their male counterparts.” (IR&D, op cit.). The median years of experience is down in 1981 from previous years. Some 40% of the women surveyed had less than 6 years experience, compared to about 14% of the men. These figures contrast with those of the survey trends of previous years, which indicated a direct relation between salary and experience. It is still true that because larger numbers of men have over 16 years of experience, the highest paid employees in research and development fields are men. It is noted, however, that in the beginning salary scales ($16-27 k/yr) women outnumber men.

  17. Learning to lead at Toyota.

    Science.gov (United States)

    Spear, Steven J

    2004-05-01

    Many companies have tried to copy Toyota's famous production system--but without success. Why? Part of the reason, says the author, is that imitators fail to recognize the underlying principles of the Toyota Production System (TPS), focusing instead on specific tools and practices. This article tells the other part of the story. Building on a previous HBR article, "Decoding the DNA of the Toyota Production System," Spear explains how Toyota inculcates managers with TPS principles. He describes the training of a star recruit--a talented young American destined for a high-level position at one of Toyota's U.S. plants. Rich in detail, the story offers four basic lessons for any company wishing to train its managers to apply Toyota's system: There's no substitute for direct observation. Toyota employees are encouraged to observe failures as they occur--for example, by sitting next to a machine on the assembly line and waiting and watching for any problems. Proposed changes should always be structured as experiments. Employees embed explicit and testable assumptions in the analysis of their work. That allows them to examine the gaps between predicted and actual results. Workers and managers should experiment as frequently as possible. The company teaches employees at all levels to achieve continuous improvement through quick, simple experiments rather than through lengthy, complex ones. Managers should coach, not fix. Toyota managers act as enablers, directing employees but not telling them where to find opportunities for improvements. Rather than undergo a brief period of cursory walk-throughs, orientations, and introductions as incoming fast-track executives at most companies might, the executive in this story learned TPS the long, hard way--by practicing it, which is how Toyota trains any new employee, regardless of rank or function.

  18. Lead isotope analyses of standard rock samples

    International Nuclear Information System (INIS)

    Koide, Yoshiyuki; Nakamura, Eizo

    1990-01-01

    New results on lead isotope compositions of standard rock samples and their analytical procedures are reported. Bromide form anion exchange chromatography technique was adopted for the chemical separation lead from rock samples. The lead contamination during whole analytical procedure was low enough to determine lead isotope composition of common natural rocks. Silica-gel activator method was applied for emission of lead ions in the mass spectrometer. Using the data reduction of 'unfractionated ratios', we obtained good reproducibility, precision and accuracy on lead isotope compositions of NBS SRM. Here we present new reliable lead isotope compositions of GSJ standard rock samples and USGS standard rock, BCR-1. (author)

  19. Cool horizons lead to information loss

    Science.gov (United States)

    Chowdhury, Borun D.

    2013-10-01

    There are two evidences for information loss during black hole evaporation: (i) a pure state evolves to a mixed state and (ii) the map from the initial state to final state is non-invertible. Any proposed resolution of the information paradox must address both these issues. The firewall argument focuses only on the first and this leads to order one deviations from the Unruh vacuum for maximally entangled black holes. The nature of the argument does not extend to black holes in pure states. It was shown by Avery, Puhm and the author that requiring the initial state to final state map to be invertible mandates structure at the horizon even for pure states. The proof works if black holes can be formed in generic states and in this paper we show that this is indeed the case. We also demonstrate how models proposed by Susskind, Papadodimas et al. and Maldacena et al. end up making the initial to final state map non-invertible and thus make the horizon "cool" at the cost of unitarity.

  20. Nursing: not the problem, but leading solutions.

    Science.gov (United States)

    Smadu, Marlene; Shamian, Judith

    2012-01-01

    One of the major themes uncovered by Graham and Sibbald in their analysis of the 50-year-old issues of Hospital Administration in Canada (HAC) is the evolution of nursing. However, the HAC approach 50 years ago was that nursing was a problem to be solved, not a resource for health, the health system and the public, and that image would stay with nursing in Canada for many years to come. The recent commissioning by the Canadian Nurses Association of a National Expert Commission to examine sustainability of health and the healthcare system, and the resultant report, The Health of Our Nation, the Future of Our Health System: A Nursing Call to Action, released in June 2012, reflect a significantly different expectation about nurses and the nursing profession - they are not problems to be addressed, but are leading the solutions to better health, better care and better value. And patients are not passive recipients of care decided on by professionals alone, but central team members - "CEOs of their own healthcare" - in an inter-professional patient-/family-focused team that collectively supports people in their health journey. A number of examples of potential articles about and from nursing, based on the findings of the National Expert Commission, are included to illustrate how nursing should be reflected in an issue of HAC in 2012.

  1. Plant mediated detoxification of mercury and lead

    Directory of Open Access Journals (Sweden)

    Brajesh Kumar

    2017-05-01

    Full Text Available In recent years, the development of efficient green chemistry methods for detoxification of metal poisoning has become a major focus of researchers. They have investigated in order to find an eco-friendly and recyclable technique for the removal of heavy metal (Pb2+, Hg2+ contamination from the natural resources. One of the most considered methods is the removal of Pb2+, Hg2+ metal using green plants and their wastes. Among these plant wastes seem to be the best candidates and they are suitable for detoxification of heavy metals. Biosorption by plants involve complex mechanisms, mainly ion exchange, chelation, adsorption by physical forces and ion entrapment in inter and intra fibrillar capillaries and spaces of the structural polysaccharide cell wall network. The advantages of using green plants and their wastes for detoxification of heavy metal have interested researchers to investigate mechanisms of metal ion uptake, and to understand the possible utilization. In this review, we discuss the role of plants and their wastes for minimizing mercury and lead pollution with their toxic effect on both human beings and plants.

  2. Measurement of lead compound in stack gas

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Y; Hori, M; Tanikawa, N

    1979-01-01

    The concentration and particle-size distribution of lead compounds in the exhaust gas from various stationary sources are examined. The stationary sources concern lead production from battery scraps, lead smelting of cable mold, steel production from iron scraps, plastic combustion furnace, and a heavy oil boiler. A lead concentration of 0.2-100 mg/cu m in exhaust gas is detected. Furthermore, exhaust gas lead compounds are affected by the raw materials used.

  3. A UV prime focus spectrograph for the CFHT

    International Nuclear Information System (INIS)

    Boulade, O.; Vigroux, L.

    1986-03-01

    The UV prime spectrograph at the Canada-France-Hawaii Telescope is the first instrument to be designed with an aspherized diffraction grating. This technique leads to all reflective Schmidt designs with a very small amount of optical surface on fast aperture ratio. A thin backside illuminated RCA CCD is now used as the detector. Since the detector is at the focus of an f/1 mounting, within the optical path, a minicryostat (5 cm x 5 cm x 3 cm) was designed to minimize the central obscuration. This paper describes this new instrument and its performances

  4. Implementing a least cost and risk focused maintenance process

    International Nuclear Information System (INIS)

    Darling, S.S.

    1996-01-01

    The paper will focus on the vital role maintenance, big ''M'' (spares, PM program, planning and scheduling, turning the wrench), has in preserving return of investment, and safety in operation of high risk high value facilities/platforms. The maintenance process of today and for the future must utilize risk assessment and reliability engineering techniques to prioritize plant resources. The new process must provide for high levels of safety assurance yet allow for improved generation and transmission capacity while maintaining adequate system reliability. This approach ultimately leads to continuous and sustained reduction in operating cost, improved production capacity, and a safety culture based upon a risk determent cost-beneficial decision process

  5. Tanks Focus Area annual report FY2000

    International Nuclear Information System (INIS)

    2000-01-01

    The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation effort with tanks containing hazardous and radioactive waste resulting from the production of nuclear materials. With some 90 million gallons of waste in the form of solid, sludge, liquid, and gas stored in 287 tanks across the DOE complex, containing approximately 650 million curies, radioactive waste storage tank remediation is the nation's highest cleanup priority. Differing waste types and unique technical issues require specialized science and technology to achieve tank cleanup in an environmentally acceptable manner. Some of the waste has been stored for over 50 years in tanks that have exceeded their design lives. The challenge is to characterize and maintain these contents in a safe condition and continue to remediate and close each tank to minimize the risks of waste migration and exposure to workers, the public, and the environment. In 1994, the DOE's Office of Environmental Management (EM) created a group of integrated, multiorganizational teams focusing on specific areas of the EM cleanup mission. These teams have evolved into five focus areas managed within EM's Office of Science and Technology (OST): Tanks Focus Area (TFA); Deactivation and Decommissioning Focus Area; Nuclear Materials Focus Area; Subsurface Contaminants Focus Area; and Transuranic and Mixed Waste Focus Area

  6. Tanks Focus Area annual report FY2000

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-12-01

    The U.S. Department of Energy (DOE) continues to face a major radioactive waste tank remediation effort with tanks containing hazardous and radioactive waste resulting from the production of nuclear materials. With some 90 million gallons of waste in the form of solid, sludge, liquid, and gas stored in 287 tanks across the DOE complex, containing approximately 650 million curies, radioactive waste storage tank remediation is the nation's highest cleanup priority. Differing waste types and unique technical issues require specialized science and technology to achieve tank cleanup in an environmentally acceptable manner. Some of the waste has been stored for over 50 years in tanks that have exceeded their design lives. The challenge is to characterize and maintain these contents in a safe condition and continue to remediate and close each tank to minimize the risks of waste migration and exposure to workers, the public, and the environment. In 1994, the DOE's Office of Environmental Management (EM) created a group of integrated, multiorganizational teams focusing on specific areas of the EM cleanup mission. These teams have evolved into five focus areas managed within EM's Office of Science and Technology (OST): Tanks Focus Area (TFA); Deactivation and Decommissioning Focus Area; Nuclear Materials Focus Area; Subsurface Contaminants Focus Area; and Transuranic and Mixed Waste Focus Area.

  7. Deep-Focusing Time-Distance Helioseismology

    Science.gov (United States)

    Duvall, T. L., Jr.; Jensen, J. M.; Kosovichev, A. G.; Birch, A. C.; Fisher, Richard R. (Technical Monitor)

    2001-01-01

    Much progress has been made by measuring the travel times of solar acoustic waves from a central surface location to points at equal arc distance away. Depth information is obtained from the range of arc distances examined, with the larger distances revealing the deeper layers. This method we will call surface-focusing, as the common point, or focus, is at the surface. To obtain a clearer picture of the subsurface region, it would, no doubt, be better to focus on points below the surface. Our first attempt to do this used the ray theory to pick surface location pairs that would focus on a particular subsurface point. This is not the ideal procedure, as Born approximation kernels suggest that this focus should have zero sensitivity to sound speed inhomogeneities. However, the sensitivity is concentrated below the surface in a much better way than the old surface-focusing method, and so we expect the deep-focusing method to be more sensitive. A large sunspot group was studied by both methods. Inversions based on both methods will be compared.

  8. Focusing of Acoustic Waves through Acoustic Materials with Subwavelength Structures

    KAUST Repository

    Xiao, Bingmu

    2013-05-01

    In this thesis, wave propagation through acoustic materials with subwavelength slits structures is studied. Guided by the findings, acoustic wave focusing is achieved with a specific material design. By using a parameter retrieving method, an effective medium theory for a slab with periodic subwavelength cut-through slits is successfully derived. The theory is based on eigenfunction solutions to the acoustic wave equation. Numerical simulations are implemented by the finite-difference time-domain (FDTD) method for the two-dimensional acoustic wave equation. The theory provides the effective impedance and refractive index functions for the equivalent medium, which can reproduce the transmission and reflection spectral responses of the original structure. I analytically and numerically investigate both the validity and limitations of the theory, and the influences of material and geometry on the effective spectral responses are studied. Results show that large contrasts in impedance and density are conditions that validate the effective medium theory, and this approximation displays a better accuracy for a thick slab with narrow slits in it. Based on the effective medium theory developed, a design of a at slab with a snake shaped" subwavelength structure is proposed as a means of achieving acoustic focusing. The property of focusing is demonstrated by FDTD simulations. Good agreement is observed between the proposed structure and the equivalent lens pre- dicted by the theory, which leads to robust broadband focusing by a thin at slab.

  9. A MARKETING PARADIGM: LEADING ORGANISATIONS THAT CREATE BRAND IDENTITY IN A CONSCIOUSLY AND WELL DESIGNED AESTHETICS-FOCUSED MANNER

    Directory of Open Access Journals (Sweden)

    Ayça Can Kırgız

    2013-07-01

    Full Text Available Inasmuch as marketing is based on creating value for consumers and receiving values inreturn, needs of consumers and requests thereof arising incident thereto is of substantialimportance for marketers. Should the marketers be oriented to meet the needs of people insocieties that have passed to the consumption of experiences for the sake of creating value forconsumers by considering this, such an approach will be recognized as a 'value' they look forthrough the members/ consumers of cited societies and turn back again as a 'value' tobusinesses in return.Aesthetics is of the essence in order to create customer value however strategic managementof aesthetics, as well as other tools creating value, is also required for ensuring the fullpotential of the value expected in return of the investment made.The vitality of aesthetics incustomers’ lives provides opportunities for organizations to appeal to customers through avariety of sensory experiences and thereby benefitboth the customers and the organizationsthrough customer satisfaction and loyalty. These opportunities are not limited to industriessuch as fashion, cosmetics and entertainment that are concerned with aesthetic products assuch. They are not limited to exclusive, luxury products for high-end segments. Anyorganization whatsoever,in any industry, for any customer base, for profit or not for profit,governmental or private, consumer, industrial or service can benefit from using aesthetics.In this study, the concept of aesthetics is evaluated within the purview of product-focusedmarketing aesthetics and importance of aestheticsin terms of brand and people, andpioneering businesses that create brand identitiesknowingly and by planning will bediscussed with examples germane thereto.

  10. Technology of a small plasma focus

    International Nuclear Information System (INIS)

    Lee, S.

    1990-01-01

    This paper reviews plasma focus technology, including the underlying dynamic and energy balance theory, scaling of the neutron yield, cost effectiveness of the design, as well as the main subsystems, e.g., capacitor bank, spark-gap switch and triggering electronics, the plasma focus tube, some simple diagnostics, and a high-voltage charger. It discusses the range of densities and temperatures available with a small plasma focus, and the type of experiments and applications that can be carried out with it. 61 refs, 21 figs

  11. Designing focusing solenoids for superconducting RF accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Davis, G.; Kashikhin, V.V.; Page, T.; Terechkine, I.; Tompkins, J.; Wokas, T.; /Fermilab

    2006-08-01

    The design of a focusing solenoid for use in a superconducting RF linac requires resolving a range of problems with conflicting requirements. Providing the required focusing strength contradicts the goal of minimizing the stray field on the surfaces of adjacent superconducting RF cavities. The requirement of a compact solenoid, able to fit into a gap between cavities, contradicts the need of mechanical support necessary to restrain electromagnetic forces that can result in coil motion and subsequent quenching. In this report we will attempt to address these and other issues arising during the development of focusing solenoids. Some relevant test data will also be presented.

  12. Melatonin reduces lead levels in blood, brain and bone and increases lead excretion in rats subjected to subacute lead treatment.

    Science.gov (United States)

    Hernández-Plata, Everardo; Quiroz-Compeán, Fátima; Ramírez-Garcia, Gonzalo; Barrientos, Eunice Yáñez; Rodríguez-Morales, Nadia M; Flores, Alberto; Wrobel, Katarzina; Wrobel, Kazimierz; Méndez, Isabel; Díaz-Muñoz, Mauricio; Robles, Juvencio; Martínez-Alfaro, Minerva

    2015-03-04

    Melatonin, a hormone known for its effects on free radical scavenging and antioxidant activity, can reduce lead toxicity in vivo and in vitro.We examined the effects of melatonin on lead bio-distribution. Rats were intraperitoneally injected with lead acetate (10, 15 or 20mg/kg/day) with or without melatonin (10mg/kg/day) daily for 10 days. In rats intoxicated with the highest lead doses, those treated with melatonin had lower lead levels in blood and higher levels in urine and feces than those treated with lead alone, suggesting that melatonin increases lead excretion. To explore the mechanism underlying this effect, we first assessed whether lead/melatonin complexes were formed directly. Electronic density functional (DFT) calculations showed that a lead/melatonin complex is energetically feasible; however, UV spectroscopy and NMR analysis showed no evidence of such complexes. Next, we examined the liver mRNA levels of metallothioneins (MT) 1 and 2. Melatonin cotreatment increased the MT2 mRNA expression in the liver of rats that received the highest doses of lead. The potential effects of MTs on the tissue distribution and excretion of lead are not well understood. This is the first report to suggest that melatonin directly affects lead levels in organisms exposed to subacute lead intoxication. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  13. Applications of focused ion beams in microelectronics

    International Nuclear Information System (INIS)

    Broughton, C.; Beale, M.I.J.; Deshmukh, V.G.I.

    1986-04-01

    We present the conclusions of the RSRE programme on the application of focused ion beams in microelectronics and review the literature published in this field. We discuss the design and performance of focused beam implanters and the viability of their application to semiconductor device fabrication. Applications in the areas of lithography, direct implantation and micromachining are discussed in detail. Comparisons are made between the use of focused ion beams and existing techniques for these fabrication processes with a strong emphasis placed on the relative throughputs. We present results on a novel spot size measurement technique and the effect of beam heating on resist. We also present the results of studies into implantation passivation of resist to oxygen plasma attack as basis for a dry development lithography scheme. A novel lithography system employing flood electron exposure from a photocathode which is patterned by a focused ion beam which can also be used to repair mask defects is considered. (author)

  14. Focus Cities : Reducing the Vulnerability, Poverty and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Focus Cities : Reducing the Vulnerability, Poverty and Environmental Load in ... 000 lives in closely constructed houses built right up to the edge of the Rimac River. ... and the Lima Metropolitan Urban Plan will be updated in light of the results.

  15. Focusing on ADHD - Attention Deficit Hyperactivity Disorder

    Science.gov (United States)

    ... September 2014 Print this issue Focusing on ADHD Attention Deficit Hyperactivity Disorder En español Send us your comments ... might be signs of a developmental disorder called attention deficit hyperactivity disorder, or ADHD. ADHD is a common ...

  16. Spatial filters for focusing ultrasound images

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt; Gori, Paola

    2001-01-01

    , but the approach always yields point spread functions better or equal to a traditional dynamically focused image. Finally, the process was applied to in-vivo clinical images of the liver and right kidney from a 28 years old male. The data was obtained with a single element transducer focused at 100 mm....... A new method for making spatial matched filter focusing of RF ultrasound data is proposed based on the spatial impulse response description of the imaging. The response from a scatterer at any given point in space relative to the transducer can be calculated, and this gives the spatial matched filter...... for synthetic aperture imaging for single element transducers. It is evaluated using the Field II program. Data from a single 3 MHz transducer focused at a distance of 80 mm is processed. Far from the transducer focal region, the processing greatly improves the image resolution: the lateral slice...

  17. Structural Analysis of Extended Plasma Focus Chamber

    International Nuclear Information System (INIS)

    Mohd Azhar Ahmad; Abdul Halim Baijan; Siti Aiasah Hashim

    2016-01-01

    Accelerator Development Centre (ADC) of Nuclear Malaysia intends to upgrade the plasma focus device. It involves the extension part placed on top of the existing plasma focus vacuum chamber. This extended vacuum chamber purposely to give an extra space in conducting experiments on the existing plasma focus chamber. The aim of upgrading the plasma focus device is to solve the limitation in research and analysis of sample due to its done in an open system that cause analysis of samples is limited and less optimal. This extended chamber was design in considering the ease of fabrication as well as durability of its structural. Thus, this paper discusses the structural analysis in term of pressure loading effect in extended chamber. (author)

  18. FOCUS AND CONSTITUENT QUESTION FORMATION IN DAGBANI

    African Journals Online (AJOL)

    Issah

    Key words: SpecFoc, focus marker, clause initial, constituent interrogatives, information ... 1Throughout this work, I use the phrase interrogative words in a general way to refer to the ...... Wh-Questions and extraction asymmetries in Malagasy.

  19. Symmetric lens with extended depth of focus

    OpenAIRE

    Cho, Sung Nae

    2008-01-01

    The lens surface profile is derived based on the instantaneous focal length versus the lens radius data. The lens design based on instantaneous focal length versus the lens radius data has many useful applications in software assisted image focusing technology.

  20. Social Work Intervention Focused on Transitions

    Science.gov (United States)

    2016-12-19

    Study Focus: 30-day Rehospitalizations Among At-risk Older Adults Randomized to a Social Work-driven Care Transitions Intervention; Heart Disease; Diabetes; Hypertension; Cancer; Depression; Asthma; Chronic Heart Failure; Chronic Obstructive Pulmonary Disease; Stroke

  1. Nonverbal communication in the focus-group

    Directory of Open Access Journals (Sweden)

    Alina Simona TECĂU

    2015-12-01

    Full Text Available In the process of analysing the information obtained through focus group qualitative marketing research, a very important source of data is represented by non-verbal communication. Although the literature reveals an abundance of published material that describes how data obtained through focus group should be analysed, one of the least addressed issue is the interpretation of signals from participants: gestures, posture, dynamic and rhythm of speech or even the silence. This Article addresses precisely aspects of non-verbal communication in the focus group's and although not intended to examine in detail the results of a focus group, it shows how some of signals transmitted by participants of such research have been analysed and interpreted.

  2. Niger institute focuses on financial accountability | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-28

    Apr 28, 2016 ... Niger institute focuses on financial accountability ... on renewing outdated financial management systems that impeded effective management and reporting on its activities. ... Canada-Africa grants spur novel ideas, networks.

  3. Plasma focus as a pulsed power source

    International Nuclear Information System (INIS)

    Sahlin, H.; McFarland, G.; Barlett, R.; Gullickson, R.

    1975-01-01

    The plasma focus is a remarkable natural phenomena that achieves significant space-time compression of both particle and field energy. Depending on the mode of operation, about 20 percent of the bank energy can be concentrated into the kinetic energy of a thin, dense, cylindrically convergent gas shell, or into a small-diameter, high-ν/γ relativistic electron burst and oppositely directed ion burst. The kinetic energy of the fast ions and electrons can exceed the applied voltage by a factor of greater than 100. The different modes of energy concentration by the plasma focus are presented and discussed both in terms of their role in the direct yield of the focus and for the case of a plasma focus supplemented by various fusionable targets

  4. Acute and chronic lead poisoning in cattle

    Energy Technology Data Exchange (ETDEWEB)

    Iosif, C

    1966-02-01

    Three cases of acute plumbism in cows are detailed: one of a six-year-old cow who accidentally ate about 100 gm. of lead (in 1956); the second of a 12-year-old cow who accidentally ate a packet containing about 100 gm. of lead used in painting; and the third of a three-week-old heifer who licked a freshly painted bucket. Route of exposure to lead can be gastrointestinal following deposition of lead fumes (lead oxide, sulfide, and sulfate) on pasturage and in exposed drinking water, or respiratory following the inhalation of such fumes. The presence of CO/sub 2/ in the respiratory tract is thought to provide a favorable situation for the dissolution of lead and the formation of soluble lead complexes. One author has calculated that 12% of respired lead is absorbed into the organism, while only 1-2% of ingested lead is absorbed.

  5. Screening children for elevated blood lead - Learnings from the literature

    Energy Technology Data Exchange (ETDEWEB)

    Boreland, Frances [Broken Hill Centre for Remote Health Research, Broken Hill University Department of Rural Health, University of Sydney, Corrindah Court, PO Box 457, Broken Hill, NSW 2880 (Australia)], E-mail: fboreland@gwahs.health.nsw.gov.au; Lyle, David [Broken Hill Centre for Remote Health Research, Broken Hill University Department of Rural Health, University of Sydney, Corrindah Court, PO Box 457, Broken Hill, NSW 2880 (Australia)], E-mail: dlyle@gwahs.health.nsw.gov.au

    2008-02-01

    Introduction: Although it is important that children at risk of developing elevated blood lead receive regular screening, attendance at screening programs is variable. A literature review was undertaken to better understand the factors that affect carers' decisions about whether or not to take their children for blood lead screening. Method: Electronic databases (Medline, EMBASE, CINAHL, Psychinfo) were searched to identify relevant publications, supported by reviewing reference lists of identified articles and searching with internet-based search engines. Results: Thirty-four published studies dealing with blood lead screening rates were identified, of which only seven papers focused specifically on parent's attitudes to blood lead screening. The barriers to and enablers of screening for elevated blood lead levels appear to be similar to those identified for other screening programs. Discussion: It is recommended that attendance at screening be routinely monitored, and that where participation is suboptimal further research be undertaken, in close co-operation with affected communities or sub-groups, to determine how best to encourage screening and to protect children from lead. It is important to minimize stigma and to ensure, as far as possible, that practical barriers such as lack of transport do not restrict access to screening programs.

  6. A systems approach to risk management through leading safety indicators

    International Nuclear Information System (INIS)

    Leveson, Nancy

    2015-01-01

    The goal of leading indicators for safety is to identify the potential for an accident before it occurs. Past efforts have focused on identifying general leading indicators, such as maintenance backlog, that apply widely in an industry or even across industries. Other recommendations produce more system-specific leading indicators, but start from system hazard analysis and thus are limited by the causes considered by the traditional hazard analysis techniques. Most rely on quantitative metrics, often based on probabilistic risk assessments. This paper describes a new and different approach to identifying system-specific leading indicators and provides guidance in designing a risk management structure to generate, monitor and use the results. The approach is based on the STAMP (System-Theoretic Accident Model and Processes) model of accident causation and tools that have been designed to build on that model. STAMP extends current accident causality to include more complex causes than simply component failures and chains of failure events or deviations from operational expectations. It incorporates basic principles of systems thinking and is based on systems theory rather than traditional reliability theory. - Highlights: • Much effort has gone into developing leading indicators with only limited success. • A systems-theoretic, assumption-based approach may be more successful. • Leading indicators are warning signals of an assumption’s changing vulnerability. • Heuristic biases can be controlled by using plausibility rather than likelihood

  7. The detrimental effects of lead on human and animal health

    Directory of Open Access Journals (Sweden)

    Mohammed Abdulrazzaq Assi

    2016-06-01

    Full Text Available Lead, a chemical element in the carbon group with symbol Pb (from Latin: Plumbum, meaning “the liquid silver” and has an atomic number 82 in the periodic table. It was the first element that was characterized by its kind of toxicity. In animal systems, lead (Pb has been incriminated in a wide spectrum of toxic effects and it is considered one of the persistent ubiquitous heavy metals. Being exposed to this metal could lead to the change of testicular functions in human beings as well as in the wildlife. The lead poising is a real threat to the public health, especially in the developing countries. Accordingly, great efforts on the part of the occupational and public health have been taken to curb the dangers of this metal. Hematopoietic, renal, reproductive, and central nervous system are among the parts of the human body and systems that are vulnerable toward the dangers following exposure to high level of Pb. In this review, we discussed the massive harmful impact that leads acetate toxicity has on the animals and the worrying fact that this harmful toxicant can be found quite easily in the environment and abundance. Highlighting its (Pb effects on various organs in the biological systems, its economic, as well as scientific importance, with the view to educate the public/professionals who work in this area. In this study, we focus on the current studies and research related to lead toxicity in animals and also to a certain extent toward human as well.

  8. Screening children for elevated blood lead - Learnings from the literature

    International Nuclear Information System (INIS)

    Boreland, Frances; Lyle, David

    2008-01-01

    Introduction: Although it is important that children at risk of developing elevated blood lead receive regular screening, attendance at screening programs is variable. A literature review was undertaken to better understand the factors that affect carers' decisions about whether or not to take their children for blood lead screening. Method: Electronic databases (Medline, EMBASE, CINAHL, Psychinfo) were searched to identify relevant publications, supported by reviewing reference lists of identified articles and searching with internet-based search engines. Results: Thirty-four published studies dealing with blood lead screening rates were identified, of which only seven papers focused specifically on parent's attitudes to blood lead screening. The barriers to and enablers of screening for elevated blood lead levels appear to be similar to those identified for other screening programs. Discussion: It is recommended that attendance at screening be routinely monitored, and that where participation is suboptimal further research be undertaken, in close co-operation with affected communities or sub-groups, to determine how best to encourage screening and to protect children from lead. It is important to minimize stigma and to ensure, as far as possible, that practical barriers such as lack of transport do not restrict access to screening programs

  9. Lead-Binding Proteins: A Review

    Directory of Open Access Journals (Sweden)

    Harvey C. Gonick

    2011-01-01

    Full Text Available Lead-binding proteins are a series of low molecular weight proteins, analogous to metallothionein, which segregate lead in a nontoxic form in several organs (kidney, brain, lung, liver, erythrocyte. Whether the lead-binding proteins in every organ are identical or different remains to be determined. In the erythrocyte, delta-aminolevulinic acid dehydratase (ALAD isoforms have commanded the greatest attention as proteins and enzymes that are both inhibitable and inducible by lead. ALAD-2, although it binds lead to a greater degree than ALAD-1, appears to bind lead in a less toxic form. What may be of greater significance is that a low molecular weight lead-binding protein, approximately 10 kDa, appears in the erythrocyte once blood lead exceeds 39 μg/dL and eventually surpasses the lead-binding capacity of ALAD. In brain and kidney of environmentally exposed humans and animals, a cytoplasmic lead-binding protein has been identified as thymosin β4, a 5 kDa protein. In kidney, but not brain, another lead-binding protein has been identified as acyl-CoA binding protein, a 9 kDa protein. Each of these proteins, when coincubated with liver ALAD and titrated with lead, diminishes the inhibition of ALAD by lead, verifying their ability to segregate lead in a nontoxic form.

  10. Neurobehavioural effects of occupational exposure to lead.

    Science.gov (United States)

    Williamson, A M; Teo, R K

    1986-06-01

    A set of neurobehavioural tests selected on the basis of information processing theory was used to study the effect of low level occupational lead exposure on 59 lead workers compared with a matched control group of the same number. Only one of the lead exposed group had a blood lead concentration above the current threshold limit value of 3.81 mumol/l at the time of testing (mean 2.36 mumol/l, range 1.19-3.92 mumol/l) and none had been detected above that level in the previous three years. Nevertheless, most neurobehavioural functions tested showed some impairment in the lead workers. Visual sensory function was affected and, perhaps as a consequence, sustained attention and psychomotor tasks were performed more slowly by the lead exposed group. Cognitive functions were also impaired, with sensory store memory, short term memory, and learning abilities all showing deficits in lead workers. Such cognitive deficits may also be partly due to initial degradation of the visual input. Long term memory performance compared equally with control levels possibly because of development of a compensatory strategy such as rehearsal by the lead exposed subjects. Multiple linear regression analysis relating to lead workers test performance and their lead exposure showed that performance on the sensory store memory test alone was significantly related to exposure. This was probably due to the homogeneity of the lead exposed group with regard to blood lead concentrations and the use of blood lead as a measure of chronic lead exposure.

  11. Neurobehavioural effects of occupational exposure to lead

    Energy Technology Data Exchange (ETDEWEB)

    Williamson, A.M.; Teo, R.K.

    1986-06-01

    A set of neurobehavioural tests selected on the basis of information processing theory was used to study the effect of low level occupational lead exposure on 59 lead workers compared with a matched control group of the same number. Only one of the lead exposed group had a blood lead concentration above the current threshold limit value of 3.81 mumol/l at the time of testing (mean 2.36 mumol/l, range 1.19-3.92 mumol/l) and none had been detected above that level in the previous three years. Nevertheless, most neurobehavioural functions tested showed some impairment in the lead workers. Visual sensory function was affected and, perhaps as a consequence, sustained attention and psychomotor tasks were performed more slowly by the lead exposed group. Cognitive functions were also impaired, with sensory store memory, short term memory, and learning abilities all showing deficits in lead workers. Such cognitive deficits may also be partly due to initial degradation of the visual input. Long term memory performance compared equally with control levels possibly because of development of a compensatory strategy such as rehearsal by the lead exposed subjects. Multiple linear regression analysis relating to lead workers test performance and their lead exposure showed that performance on the sensory store memory test alone was significantly related to exposure. This was probably due to the homogeneity of the lead exposed group with regard to blood lead concentrations and the use of blood lead as a measure of chronic lead exposure.

  12. Deployment Support Leading to Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Cook, E E

    1997-10-01

    The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB's ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should

  13. Kinetics of oil saponification by lead salts in ancient preparations of pharmaceutical lead plasters and painting lead mediums.

    Science.gov (United States)

    Cotte, M; Checroun, E; Susini, J; Dumas, P; Tchoreloff, P; Besnard, M; Walter, Ph

    2006-12-15

    Lead soaps can be found in archaeological cosmetics as well as in oil paintings, as product of interactions of lead salts with oil. In this context, a better understanding of the formation of lead soaps allows a follow-up of the historical evolution of preparation recipes and provides new insights into conservation conditions. First, ancient recipes of both pharmaceutical lead plasters and painting lead mediums, mixtures of oil and lead salts, were reconstructed. The ester saponification by lead salts is determined by the preparation parameters which were quantified by FT-IR spectrometry. In particular, ATR/FT-IR spectrometer was calibrated by the standard addition method to quantitatively follow the kinetics of this reaction. The influence of different parameters such as temperature, presence of water and choice of lead salts was assessed: the saponification is clearly accelerated by water and heating. This analysis provides chemical explanations to the historical evolution of cosmetic and painting preparation recipes.

  14. Focused labeled proof systems for modal logic

    OpenAIRE

    Miller , Dale; Volpe , Marco

    2015-01-01

    International audience; Focused proofs are sequent calculus proofs that group inference rules into alternating positive and negative phases. These phases can then be used to define macro-level inference rules from Gentzen's original and tiny introduction and structural rules. We show here that the inference rules of labeled proof systems for modal logics can similarly be described as pairs of such phases within the LKF focused proof system for first-order classical logic. We consider the syst...

  15. Superconducting quadrupoles for the SLC final focus

    International Nuclear Information System (INIS)

    Erickson, R.; Fieguth, T.; Murray, J.J.

    1987-01-01

    The final focus system of the SLC will be upgraded by replacing the final quadrupoles with higher gradient superconducting magnets positioned closer to the interaction point. The parameters of the new system have been chosen to be compatible with the experimental detectors with a minimum of changes to other final focus components. These parameter choices are discussed along with the expected improvement in SLC performance

  16. Superconducting quadrupoles for the SLC final focus

    International Nuclear Information System (INIS)

    Erickson, R.; Fieguth, T.; Murray, J.J.

    1987-01-01

    The final focus system of the SLC will be upgraded by replacing the final quadrupoles with higher gradient supperconducting magnets positioned closer to the interaction point. The parameters of the new system have been chosen to be compatible with the experimental detectors with a minimum of changes to other final focus components. These parameter choices are discussed along with the expected improvement in SLC performance

  17. The final focus test beam project

    International Nuclear Information System (INIS)

    Burke, D.

    1991-05-01

    An overview is given of the Final Focus Test Beam (FFTB) that is being constructed as a prototype final focus system for a future electron-positron linear collider. This beam line will use as input the 50 GeV electron beam from the SLC linac, and is designed to reduce the transverse dimensions of the beam spot at the focal point to 1 μm. 5 refs., 2 figs., 1 tab

  18. Draft of textbook focused on indirect taxes

    OpenAIRE

    Nováková, Hana

    2012-01-01

    The diploma thesis is about draft of textbook which is focused on indirect taxes for business school. The thesis is divided into theoretical and practical part. The theoretical part is focused on teaching tax issues at business school. Readers are introduced with basic studying documents, for example framework educational program and school educational program. In the following part I have conducted didactic analysis of curriculum and textbook of economics for business schools. The draft of t...

  19. Microflow Cytometers with Integrated Hydrodynamic Focusing

    Directory of Open Access Journals (Sweden)

    Martin Schmidt

    2013-04-01

    Full Text Available This study demonstrates the suitability of microfluidic structures for high throughput blood cell analysis. The microfluidic chips exploit fully integrated hydrodynamic focusing based on two different concepts: Two-stage cascade focusing and spin focusing (vortex principle. The sample—A suspension of micro particles or blood cells—is injected into a sheath fluid streaming at a substantially higher flow rate, which assures positioning of the particles in the center of the flow channel. Particle velocities of a few m/s are achieved as required for high throughput blood cell analysis. The stability of hydrodynamic particle positioning was evaluated by measuring the pulse heights distributions of fluorescence signals from calibration beads. Quantitative assessment based on coefficient of variation for the fluorescence intensity distributions resulted in a value of about 3% determined for the micro-device exploiting cascade hydrodynamic focusing. For the spin focusing approach similar values were achieved for sample flow rates being 1.5 times lower. Our results indicate that the performances of both variants of hydrodynamic focusing suit for blood cell differentiation and counting. The potential of the micro flow cytometer is demonstrated by detecting immunologically labeled CD3 positive and CD4 positive T-lymphocytes in blood.

  20. Veselago focusing of anisotropic massless Dirac fermions

    Science.gov (United States)

    Zhang, Shu-Hui; Yang, Wen; Peeters, F. M.

    2018-05-01

    Massless Dirac fermions (MDFs) emerge as quasiparticles in various novel materials such as graphene and topological insulators, and they exhibit several intriguing properties, of which Veselago focusing is an outstanding example with a lot of possible applications. However, up to now Veselago focusing merely occurred in p-n junction devices based on the isotropic MDF, which lacks the tunability needed for realistic applications. Here, motivated by the emergence of novel Dirac materials, we investigate the propagation behaviors of anisotropic MDFs in such a p-n junction structure. By projecting the Hamiltonian of the anisotropic MDF to that of the isotropic MDF and deriving an exact analytical expression for the propagator, precise Veselago focusing is demonstrated without the need for mirror symmetry of the electron source and its focusing image. We show a tunable focusing position that can be used in a device to probe masked atom-scale defects. This study provides an innovative concept to realize Veselago focusing relevant for potential applications, and it paves the way for the design of novel electron optics devices by exploiting the anisotropic MDF.