WorldWideScience

Sample records for type synthesis characterization

  1. Synthesis and characterization of pyrochlore-type yttrium titanate ...

    Indian Academy of Sciences (India)

    result in better behaviour in hydrogen storage. Keywords. Yttrium titanate; sol–gel method; synthesis. ... cursor, in which metal ions are uniformly distributed. During the calcination step the polymeric network col- ... mined using an EDX spectrometer attached to the FESEM. (FESEM, JSM-7001F, JEOL Japan). TEM samples ...

  2. Synthesis and characterization of Ruddlesden–Popper (RP) type ...

    Indian Academy of Sciences (India)

    Administrator

    ween the rock-salt layers. The three ABO3 perovskite layers with corner-sharing BO6 octahedra along c direction are separated by AO rock-salt layers in the third member of the RP family, A4B3O10. The n = 1 phases with K2NiF4 type structure, possess 2D char- acter. Increase in n is expected to strengthen B–O–B.

  3. Synthesis and characterization of type silicoaluminophosphates catalytic support

    International Nuclear Information System (INIS)

    Leite, C.E.T.; Carvalho, M.W.N.C.; Pereira, K.R.O.

    2010-01-01

    The refining processes, the catalytic hydrocracking is the future of diesel oil in Brazil and the first units are already scheduled to be inaugurated. Among the catalysts used in this process, silicoaluminophosphates (SAPO's) have considerable potential for use as they have been effective in the isomerization of n-alkanes, the isomerization of olefins and alkylation of aromatics. Because of this, the objective is to develop catalysts that will be used in hydrocracking reactions. The media like SAPO-5 were synthesized with different ratios silicon/aluminum, which is used as a catalytic support and have the function of crack organic molecules, since it has acidic character. The materials were characterized by techniques: X-ray diffraction, chemical analysis and textural by BET. After summarizing the media found that they had agreements with the crystalline phases presented in the literature.(author)

  4. Novel acridone-modified MCM-41 type silica: Synthesis, characterization and fluorescence tuning

    Directory of Open Access Journals (Sweden)

    Maximilian Hemgesberg

    2011-06-01

    Full Text Available A Mobil Composition of Matter (MCM-41 type mesoporous silica material containing N-propylacridone groups has been successfully prepared by co-condensation of an appropriate organic precursor with tetraethyl orthosilicate (TEOS under alkaline sol–gel conditions. The resulting material was fully characterized by means of X-ray diffraction (XRD, N2-adsorption–desorption, transmission electron microscopy (TEM, IR and UV–vis spectroscopy, as well as 29Si and 13C CP-MAS NMR techniques. The material features a high inner surface area and a highly ordered two-dimensional hexagonal pore structure. The fluorescence properties of the organic chromophore can be tuned via complexation of its carbonyl group with scandium triflate, which makes the material a good candidate for solid state sensors and optics. The successful synthesis of highly ordered MCM materials through co-condensation was found to be dependent on the chemical interaction of the different precursors.

  5. Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications

    Science.gov (United States)

    Lee, Bae Hoon; Lum, Nathaniel; Seow, Li Yuan; Lim, Pei Qi; Tan, Lay Poh

    2016-01-01

    Gelatin methacryloyl (GelMA) has been increasingly considered as an important bioink material due to its tailorable mechanical properties, good biocompatibility, and ability to be photopolymerized in situ as well as printability. GelMA can be classified into two types: type A GelMA (a product from acid treatment) and type B GelMA (a product from alkali treatment). In current literature, there is little research on the comparison of type A GelMA and type B GelMA in terms of synthesis, rheological properties, and printability for bioink applications. Here, we report the synthesis, rheological properties, and printability of types A and B GelMA. Types A and B GelMA samples with different degrees of substitution (DS) were prepared in a controllable manner by a time-lapse loading method of methacrylic anhydride (MAA) and different feed ratios of MAA to gelatin. Type B GelMA tended to have a slightly higher DS compared to type A GelMA, especially in a lower feed ratio of MAA to gelatin. All the type A and type B GelMA solutions with different DS exhibited shear thinning behaviours at 37 °C. However, only GelMA with a high DS had an easy-to-extrude feature at room temperature. The cell-laden printed constructs of types A and B GelMA at 20% w/v showed around 75% cell viability. PMID:28773918

  6. Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications

    Directory of Open Access Journals (Sweden)

    Bae Hoon Lee

    2016-09-01

    Full Text Available Gelatin methacryloyl (GelMA has been increasingly considered as an important bioink material due to its tailorable mechanical properties, good biocompatibility, and ability to be photopolymerized in situ as well as printability. GelMA can be classified into two types: type A GelMA (a product from acid treatment and type B GelMA (a product from alkali treatment. In current literature, there is little research on the comparison of type A GelMA and type B GelMA in terms of synthesis, rheological properties, and printability for bioink applications. Here, we report the synthesis, rheological properties, and printability of types A and B GelMA. Types A and B GelMA samples with different degrees of substitution (DS were prepared in a controllable manner by a time-lapse loading method of methacrylic anhydride (MAA and different feed ratios of MAA to gelatin. Type B GelMA tended to have a slightly higher DS compared to type A GelMA, especially in a lower feed ratio of MAA to gelatin. All the type A and type B GelMA solutions with different DS exhibited shear thinning behaviours at 37 °C. However, only GelMA with a high DS had an easy-to-extrude feature at room temperature. The cell-laden printed constructs of types A and B GelMA at 20% w/v showed around 75% cell viability.

  7. Synthesis and magnetic characterization of Sr-based Ni2X-type hexaferrite

    Directory of Open Access Journals (Sweden)

    K. Kamishima

    2015-10-01

    Full Text Available We have investigated the synthesis conditions, and the magnetic properties of the Sr2Ni2X-type hexagonal ferrite, Sr2Ni2Fe28O46. The Sr2Ni2X-type hexaferrite was synthesized at 1240∘C. The spontaneous magnetization at 5 K was 44.2 μB/f.u., suggesting that most of the Ni2+ ions are at the up-spin octahedral sites in the spinel-structure blocks within the model of a Néel-type collinear ferrimagnetic structure. The Curie temperature of the Sr2Ni2X-type hexaferrite was estimated to be TC[Sr2Ni2X] = 472∘C. This is consistent with the difference of the block stacking structures of SrM-type, Sr2Ni2X-type, SrNi2W-type, and nickel spinel ferrites.

  8. Chimie douce synthesis and thermochemical characterization of mesoporous perovskite-type titanate phases

    International Nuclear Information System (INIS)

    Bocher, Laura; Aguirre, Myriam H.; Robert, Rosa; Trottmann, Matthias; Logvinovich, Dmitry; Hug, Paul; Weidenkaff, Anke

    2007-01-01

    Various compositions of perovskite-type titanates were synthesised by a chimie douce synthesis method with emphasis on low synthesis temperatures. The cations were complexed by citric acid as chelating agent forming a homogeneous organic/inorganic network. The thermal decomposition of this xerogel precursor was investigated by thermogravimetric analysis (TGA). Simultaneous thermal analysis with mass spectrometry (MS) in combination with infrared spectroscopy (IR) allowed studying the precursor decomposition mechanism. The perovskite phase formation was investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The citrate precursor was decomposed by two different preparation methods to evaluate the influence on the morphology and size of perovskite-type particles. The perovskite-type titanates obtained by thermal decomposition of precursors revealed well-defined mesoporous morphology. Ultrafine perovskite-type particles were also synthesized inside micro-droplets in an aerosol process using ultrasonic spray combustion (USC). This alternative preparation enhanced the specific surface area particles by a factor 3 reaching 50-60 m 2 /g

  9. Synthesis and magnetic characterization of Sr-based Ni{sub 2}X-type hexaferrite

    Energy Technology Data Exchange (ETDEWEB)

    Kamishima, K., E-mail: kamisima@fms.saitama-u.ac.jp; Mashiko, T.; Kakizaki, K.; Sakai, M. [Graduate School of Science and Engineering, Saitama University, 255 Shimo-Okubo, Saitama 338-8570 (Japan); Watanabe, K. [Biomolecular Characterization Unit, Center of Sustainable Resource Science, RIKEN, 2-1 Wako, Saitama 351-0198 (Japan); Abe, H. [Advanced Electronic Materials Center, National Institute of Materials Science, 1-1 Namiki, Tsukuba 305-0044 (Japan)

    2015-10-15

    We have investigated the synthesis conditions, and the magnetic properties of the Sr{sub 2}Ni{sub 2}X-type hexagonal ferrite, Sr{sub 2}Ni{sub 2}Fe{sub 28}O{sub 46}. The Sr{sub 2}Ni{sub 2}X-type hexaferrite was synthesized at 1240{sup ∘}C. The spontaneous magnetization at 5 K was 44.2 μ{sub B}/f.u., suggesting that most of the Ni{sup 2+} ions are at the up-spin octahedral sites in the spinel-structure blocks within the model of a Néel-type collinear ferrimagnetic structure. The Curie temperature of the Sr{sub 2}Ni{sub 2}X-type hexaferrite was estimated to be T{sub C}[Sr{sub 2}Ni{sub 2}X] = 472{sup ∘}C. This is consistent with the difference of the block stacking structures of SrM-type, Sr{sub 2}Ni{sub 2}X-type, SrNi{sub 2}W-type, and nickel spinel ferrites.

  10. SYNTHESIS, CHARACTERIZATION AND ANTIBACTERIAL ...

    African Journals Online (AJOL)

    Preferred Customer

    E-mail: a-ahmadi@kiau.ac.ir; ahmadikiau@yahoo.com. SYNTHESIS, CHARACTERIZATION AND ANTIBACTERIAL EVALUATION OF. SOME NOVEL DERIVATIVES OF 2-BROMOMETHYL-BENZIMIDAZOLE. Abbas Ahmadi*. Department of Medicinal Chemistry, Pharmaceutical Sciences Branch, Islamic Azad University,.

  11. Synthesis, characterization and OFET property of four diaminouracil bridged novel ball-type phthalocyanines

    Science.gov (United States)

    Yazıcı, Ayşegül; Avcı, Ayşe; Altındal, Ahmet; Salih, Bekir; Bekaroğlu, Özer

    New ball-type metallobisphthalocyanines 2 (Co2Pc2) and 3(Zn2Pc2) were synthesized from the corresponding 4,4‧-[(5,6-diaminopyrimidine-2,4-diyl)bis(oxy)] diphytalonitril 1, which can be obtained by a nucleophilic displacement reaction of 4-nitrophthalonitrile with 5,6-diaminouracil sulfate. Characterization of novel compounds was performed by UV-vis, FT-IR, 1H-NMR, MALDI-TOF mass spectroscopy and elemental analysis. Organic field effect transistor devices (OFETs) with top gate structure were fabricated using these novel compounds as the active material. The devices were characterized by means of their output and transfer characteristics, and it was found that these OFET devices exhibit p-type behavior. When compared with the 2-based device, the OFET with 3 showed higher field effect mobility and larger on/of current ratio. OFET devices with top gate structure were fabricated using the new ball-type metallo bisphthalocyanines as the active material. The devices characterized by means of their output and transfer characteristics and it was found that OFET devices exhibit p-type behavior.

  12. Nanoscale Hollow Spheres: Microemulsion-Based Synthesis, Structural Characterization and Container-Type Functionality

    Directory of Open Access Journals (Sweden)

    Marcus Roming

    2010-08-01

    Full Text Available A wide variety of nanoscale hollow spheres can be obtained via a microemulsion approach. This includes oxides (e.g., ZnO, TiO2, SnO2, AlO(OH, La(OH3, sulfides (e.g., Cu2S, CuS as well as elemental metals (e.g., Ag, Au. All hollow spheres are realized with outer diameters of 10-60 nm, an inner cavity size of 2-30 nm and a wall thickness of 2-15 nm. The microemulsion approach allows modification of the composition of the hollow spheres, fine-tuning their diameter and encapsulation of various ingredients inside the resulting “nanocontainers”. This review summarizes the experimental conditions of synthesis and compares them to other methods of preparing hollow spheres. Moreover, the structural characterization and selected properties of the as-prepared hollow spheres are discussed. The latter is especially focused on container-functionalities with the encapsulation of inorganic salts (e.g., KSCN, K2S2O8, KF, biomolecules/bioactive molecules (e.g., phenylalanine, quercetin, nicotinic acid and fluorescent dyes (e.g., rhodamine, riboflavin as representative examples.

  13. Synthesis, Characterization and Ferroelectric Properties of LN-Type ZnSnO3 Nanostructures

    Science.gov (United States)

    Kons, Corisa

    With increasing focus on the ill health and environmental effects of lead there is a greater push to develop Pb-free devices and materials. To this extent, ecofriendly and earth abundant LiNbO3-type ZnSnO3, a derivative of the ABO3 perovskite structure, has a high theoretically predicted polarization making it an excellent choice as a suitable alternative to lead based material such as PZT. In this work we present a novel synthesis procedure for the growth of various ZnSnO3 nanostructures by combined physical/chemical processes. Various ZnSnO3 nanostructures of different dimensions were grown from a ZnO:Al template layer on a Si (100) substrate deposited by pulsed laser deposition followed by a strategic solvothermal process. The ferroelectric properties of each sample were explored and a remanent polarization as high as nearly 30 muC/cm2 was found in aligned nanowire arrayed films. An in-depth understanding of the structure-property relationship is key to the future development of this material and is the subject of future investigations.

  14. Synthesis and characterization of p-type boron-doped IIb diamond large single crystals

    International Nuclear Information System (INIS)

    Li Shang-Sheng; Li Xiao-Lei; Su Tai-Chao; Jia Xiao-Peng; Ma Hong-An; Huang Guo-Feng; Li Yong

    2011-01-01

    High-quality p-type boron-doped IIb diamond large single crystals are successfully synthesized by the temperature gradient method in a china-type cubic anvil high-pressure apparatus at about 5.5 GPa and 1600 K. The morphologies and surface textures of the synthetic diamond crystals with different boron additive quantities are characterized by using an optical microscope and a scanning electron microscope respectively. The impurities of nitrogen and boron in diamonds are detected by micro Fourier transform infrared technique. The electrical properties including resistivities, Hall coefficients, Hall mobilities and carrier densities of the synthesized samples are measured by a four-point probe and the Hall effect method. The results show that large p-type boron-doped diamond single crystals with few nitrogen impurities have been synthesized. With the increase of quantity of additive boron, some high-index crystal faces such as {113} gradually disappear, and some stripes and triangle pits occur on the crystal surface. This work is helpful for the further research and application of boron-doped semiconductor diamond. (cross-disciplinary physics and related areas of science and technology)

  15. Phosphine-free synthesis and characterization of type-II ZnSe/CdS core-shell quantum dots

    Science.gov (United States)

    Ghasemzadeh, Roghayyeh; Armanmehr, Mohammad Hasan; Abedi, Mohammad; Fateh, Davood Sadeghi; Bahreini, Zaker

    2018-01-01

    A phosphine-free route for synthesis of type-II ZnSe/CdS core-shell quantum dots, using green, low cost and environmentally friendly reagents and phosphine-free solvents such as 1-octadecene (ODE) and liquid paraffin has been reported. Hot-injection technique has been used for the synthesis of ZnSe core quantum dots. The CdS shell quantum dots prepared by reaction of CdO precursor and S powder in 1-octadecene (ODE). The ZnSe/CdS core-shell quantum dots were synthesized via successive ion layer adsorption and reaction (SILAR) technique. The characterization of produced quantum dots were performed by absorption and fluorescence spectroscopy, X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) and transmission electron microscopy (TEM). The results showed the formation of type-II ZnSe/CdS core-shell quantum dots with FWHM 32 nm and uniform size distribution.

  16. Encapsulation of mangiferin in ordered mesoporous silica type SBA-15: synthesis and characterization

    Science.gov (United States)

    Pontes Silva, Cássia Roberta; da Rocha Ferreira, Fabricia; Dresch Webler, Geovana; Osimar Sousa da Silva, Antônio; Caxico de Abreu, Fabiane; Fonseca, Eduardo J. S.

    2017-06-01

    SBA-15 ordered mesoporous silica were synthesized using the method reported by Zhao et al (1998 J. Am. Chem. Soc. 120 6024-36). The goal of this work is to study the encapsulation of mangiferin (MGN) into porous SBA-15. SBA-MGN composites were obtained from a mixture of SBA-15 and MGN. The structures of these materials were analyzed using different characterization techniques: differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), N2 adsorption-desorption measurement, transmission electron microscopy (TEM), absorbance spectra and electrochemical assay. The isotherms of the adsorption/desorption for SBA-15 and SBA-MGN are type IV, showing that the ordered mesoporous structure of SBA-15 was maintained even after the incorporation of MGN. The decrease in the value of the specific surface area and the reduction in pore volume confirmed the incorporation of MGN at the surface and in the pores of SBA-15. The incorporation of MGN in SBA-15 aims to increase the solubility of mangiferin.

  17. Synthesis of some Mg/Co-Al type nano hydrotalcites and characterization

    Directory of Open Access Journals (Sweden)

    Khadijeh Shekoohi

    2017-01-01

    Full Text Available Hydrotalcites are quite prevalent in nature and their importance is growing more and more because of their very wide range of potential applications and uses. Because hydrotalcite does not exist in significant quantities in nature, coprecipitation methods are the most used for prepartion of hydrotalcite. In this study: Two types of Nano hydrotalcite compounds containing one divalent (Mg-Al and two divalent cation(Co-Mg-Al were synthesized based on aqueous solutions of corresponding nitrates by co-precipitation method. The molar ratio influences structure and performance of hydrotalcite largely. The crystallinity and crystallite size of the hydrotalcite were observed to varying with molar of M2+/M3+ ratio. The structure and morphology of the Nano hydrotalcites were characterized by powder X-ray diffraction, scanning electron microscopy, Fourier-transformed Infrared spectroscopy and thermal gravimetric analysis. The crystallite size of the hydrotalcite was observed to increase when the Mg/Al molar ratio increases and, more significantly, when a second divalent cation (cobalt was added.

  18. Synthesis and characterization of spinel-type zinc aluminate nanoparticles by a modified sol-gel method using new precursor

    Energy Technology Data Exchange (ETDEWEB)

    Davar, Fatemeh, E-mail: davar@kashanu.ac.ir [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317-51167 (Iran, Islamic Republic of); Salavati-Niasari, Masoud, E-mail: salavati@kashanu.ac.ir [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317-51167 (Iran, Islamic Republic of); Department of Inorganic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, P. O. Box. 87317-51167 (Iran, Islamic Republic of)

    2011-02-03

    Research highlights: > Modified sol-gel method for synthesis of spinel-type zinc aluminate nanoparticles. > Zn(en){sub 2}{sup 2+} complex (en = ethylenediamine) as new Zn{sup 2+} source. > Effect of reaction temperature on the particle size. - Abstract: In the present paper, we report the successful synthesis of spinel-type of zinc aluminate (ZnAl{sub 2}O{sub 4}) nanoparticles by a modified sol-gel method. Aluminum nitrate and Zn(en){sub 2}{sup +} complex (en: ethylenediamine) as new Zn{sup 2+} source were used. Diethylene glycol monoethyl ether and citric acid are employed as solvent and chelating agent. This method starts from the precursor complex, and involves formation of homogeneous solid intermediates, reducing atomic diffusion paths during thermal treatment. ZnO and ZnAl{sub 2}O{sub 4} nanocrystals were obtained when the precursor was heat-treated at 350 deg. C in air for 2 h. The stages of the formation of ZnAl{sub 2}O{sub 4}, as well as the characterization of the resulting compounds were done using thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The structure, particle size, and temperature of formation of ZnAl{sub 2}O{sub 4} phases were found to depend on the precursors and methods used for preparation and the calcination temperature. The lowest temperature for preparation of the ZnAl{sub 2}O{sub 4} is about 550 deg. C.

  19. Synthesis and characterization of β type solid solution in the binary ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. We have investigated Bi2O3–Eu2O3 binary system by doping with Eu2O3 in the composition range from 1 to 10 mole% via solid state reactions and succeeded to stabilize β-Bi2O3 phase which is metastable when pure. Stability of β-Bi2O3 polymorph was influenced by heat treatment temperature. Tetragonal type.

  20. Primary study on synthesis and characterization of the new type EB curable resins. Pt.2: Alkyd resins modified by LFA

    International Nuclear Information System (INIS)

    Yi Min; Wei Jinshan; Li Jun; Wang Ruiyu; Ha Hongfei

    1995-01-01

    The authors have synthesized a new type of EB curable resin by using oil fatty acid. The preparation method of coating and the performance of EB curing coating film were described. The synthesis process has been simplified and the price of the raw materials was lower

  1. SYNTHESIS AND STRUCTURAL CHARACTERIZATION nanocopper ( o) VIA MICROWAVE - ULTRASOUND , STABILIZED WITH TYPE OLIGOMERS TEREPHTHALATE BIS -2 - hydroxyethyl ( BHET )

    OpenAIRE

    Guzmán Duxtan, A.; Laboratorio de Química Cuántica y Nuevos Materiales,Departamento Académico de Físicoquímica,Facultad de Química e Ingeniería Química,Universidad Nacional Mayor de San Marcos,Lima,Perú.; Arroyo Cuyubamba, J.; Laboratorio de Química Cuántica y Nuevos Materiales,Departamento Académico de Físicoquímica,Facultad de Química e Ingeniería Química,Universidad Nacional Mayor de San Marcos,Lima,Perú.; Cárcamo Cabrera, H.; Facultad de Química e Ingeniería Química,Universidad Nacional Mayor de San Marcos,Lima,Perú.; López Mariluz, P.; Unidad de Servicios de Análisis Químicos,Facultad de Química e Ingeniería Química,Universidad Nacional Mayor de San Marcos,Lima,Perú.

    2014-01-01

    This paper describes the synthesis and characterization of copper nanoparticles (O) - Cu NPs (O) - applying the method assisted polyol ( glycolysis ) microwave ( MW ) , using an organic synthetic precursor of Cu ( II ) previously synthesized and polyethylene terephthalate ( PET ), the depolymerization reaction by MW was conducted with ethylene glycol (EG) by its high dielectric constant ( 41.4 at 298K ) and dielectric loss , allowing it to be rapidly heated with microwave radiation and achiev...

  2. Synthesis, crystal structure and characterization of novel open framework CHA-type aluminophosphate involving a chiral diamine.

    Science.gov (United States)

    Komura, Kenichi; Horibe, Yukiko; Yajima, Hiroaki; Hiyoshi, Norihito; Ikeda, Takuji

    2016-09-27

    A highly crystalline new precursor of CHA-type zeolite AlPO 4 -34 was obtained by using an aluminophosphate gel with a chiral diamine [(S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine; C 9 H 18 N 2 ] as an organic structure directing agent under hydrothermal synthesis conditions. This precursor (called GAM-1) was changed into the zeolite AlPO 4 -34 which had a high porosity (the Brunauer-Emmett-Teller (BET) surface area is approximately 700 m 3 g -1 ) using calcination. The GAM-1 obtained was characterized by various measurements, e.g., powder X-ray diffraction, scanning electron microscopy, and solid-state nuclear magnetic resonance spectroscopy, and so on. Structure determination from powder diffraction data revealed that the new precursor GAM-1 has triclinic symmetry [space group P1[combining macron], a = 9.16535(11) Å, b = 9.23042(11) Å, c = 9.29228(11) Å, α = 79.8243(7)°, β = 87.4593(7)°, γ = 86.5365(7)°] and the chemical formula was estimated to be: |Al 6 P 6 O 24 H 2 F 2 |(C 9 H 18 N 2 )·2.5(H 2 O). It also revealed that a two edge sharing AlO 4 F 2 octahedron with an [triple bond, length as m-dash]Al-F-Al[triple bond, length as m-dash] bridge was included in the framework. GAM-1 was transformed into AlPO 4 -34 with rhombohedral symmetry (R3[combining macron]) by elevating temperature to over 400 °C. At high temperatures, AlO 4 F 2 octahedron connectivity was changed into an AlO 4 tetrahedron. The crystal structure of the dehydrated AlPO 4 -34 changed back to a triclinic symmetry (P1) model again after rehydration in the atmosphere.

  3. Primary study on synthesis and characterization of the new type EB curable resins. Pt.1: Acrylic resins modified by light-oil

    International Nuclear Information System (INIS)

    Wei Jinshan; Yi Min; Wang Ruiyu; Li Jun; Ha Hongfei

    1995-01-01

    An acrylic resin modified by vegetable oil with high degree of unsaturation level has been synthesized. The characterization of coating film EB cured by the modified acrylic resin was studied primarily. The new type of EB curable acrylic resin is possessed of many merits such as cheap raw materials, simple synthesis technique and pretty characteristics of coating film. It is especially fit for timber surface coatings cured by EB radiation

  4. Enzymatic Synthesis of N-Acetyllactosamine (LacNAc Type 1 Oligomers and Characterization as Multivalent Galectin Ligands

    Directory of Open Access Journals (Sweden)

    Thomas Fischöder

    2017-08-01

    Full Text Available Repeats of the disaccharide unit N-acetyllactosamine (LacNAc occur as type 1 (Galβ1, 3GlcNAc and type 2 (Galβ1, 4GlcNAc glycosylation motifs on glycoproteins and glycolipids. The LacNAc motif acts as binding ligand for lectins and is involved in many biological recognition events. To the best of our knowledge, we present, for the first time, the synthesis of LacNAc type 1 oligomers using recombinant β1,3-galactosyltransferase from Escherichia coli and β1,3-N-acetylglucosaminyltranferase from Helicobacter pylori. Tetrasaccharide glycans presenting LacNAc type 1 repeats or LacNAc type 1 at the reducing or non-reducing end, respectively, were conjugated to bovine serum albumin as a protein scaffold by squarate linker chemistry. The resulting multivalent LacNAc type 1 presenting neo-glycoproteins were further studied for specific binding of the tumor-associated human galectin 3 (Gal-3 and its truncated counterpart Gal-3∆ in an enzyme-linked lectin assay (ELLA. We observed a significantly increased affinity of Gal-3∆ towards the multivalent neo-glycoprotein presenting LacNAc type 1 repeating units. This is the first evidence for differences in glycan selectivity of Gal-3∆ and Gal-3 and may be further utilized for tracing Gal-3∆ during tumor progression and therapy.

  5. Synthesis and characterization of the Y-type barium hexaferrite (Ba2CoZnFe12O22) obtained by ultrasonic interdispersion of chemical precitates

    International Nuclear Information System (INIS)

    Junior, E.S.G.; Santos, M.R.C.; Jardim, P.M.; Ogasawara, T.; Almeida, L.H.

    2011-01-01

    This work is to study the synthesis and characterization of the Y-type barium hexaferrite powder (Ba2CoZnFe12O22) by chemical precipitation of the precursor materials Fe(OH)3, Co(OH)2, Zn(OH)2 and Ba(OH)2 separately and ultrasonic inter-dispersion, followed by drying and calcining. The study shows that the phase formation of the Y-type barium hexaferrite begins to emerge already at a temperature of 900 ° C with further phases still present, characterized by X-ray diffraction, the grain growth of the final product of the synthesis as a function of calcination temperature is visible by SEM, the measured magnetic of the powder through the hysteresis curve confirms that the material is magnetically soft at room temperature. The synthesis method developed in this research is an option to achieve the results that would be obtained if the co-precipitation of the ferric hydroxides, of cobalt, zinc and barium were thermodynamically possible. (author)

  6. Synthesis, characterization and properties

    Indian Academy of Sciences (India)

    Unknown

    C−H⋅⋅⋅O bonds leading to an intricate hydrogen bonding network. Keywords. Synthesis .... in the refinement riding on their respective parent atoms. ..... nent peaks at 326 and 255 nm which can be assigned to transitions of the intramolecularly hydrogen-bon- ded salicylidenimino chromophore. Cotton effects of negative ...

  7. Synthesis and structural and thermodynamical characterization of hollandite type material intended for the specific containment of cesium

    International Nuclear Information System (INIS)

    Leinekugel-Le-Cocq-Errien, A.Y.

    2005-09-01

    This thesis deals with the characterization of the Ba 1 Cs 0.28 Fe 0.82 Al 1.46 Ti 5.72 O 16 hollandite envisaged for Cs containment. Techniques used are essentially classical powder XRD or synchrotron radiation at the absorption threshold of Ba and Cs, TEM and high-temperature calorimetry. Two syntheses have been studied: an alcoxide route and a dry route. After sintering, both routes lead to an incommensurate modulated tetragonal hollandite structure (space group: I4/m(00γ)00) with a modulation vector distribution. Before sintering, the material obtained by the alcoxide route is composed of three phases: a tetragonal hollandite like above, a monoclinic Ba-free hollandite and a weak-coherence-length phase containing only Ba. On contrary, the dry route already leads to the tetragonal hollandite at this step of the synthesis. High temperature oxide melt solution calorimetry was used to derive standard enthalpy of formation of hollandite to deduce its free enthalpy of formation. (author)

  8. Hydrothermal synthesis, characterization and luminescent ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Hydrothermal synthesis, characterization and luminescent properties of lanthanide-doped NaLaF 4 nanoparticles. JIGMET LADOL HEENA KHAJURIA SONIKA KHAJURIA ... Keywords. Citric acid; X-ray diffraction; down-conversion emission; energy transfer.

  9. Hydrothermal synthesis, characterization and luminescent ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Hydrothermal synthesis, characterization and luminescent properties of lanthanide-doped NaLaF 4 nanoparticles. JIGMET LADOL HEENA KHAJURIA SONIKA KHAJURIA HAQ NAWAZ SHEIKH. Volume 39 Issue 4 August 2016 pp 943-952 ...

  10. SHORT COMMUNICATION SYNTHESIS, CHARACTERIZATION ...

    African Journals Online (AJOL)

    Preferred Customer

    oxazine-. 2-ol methyl-2,3-diphenyl-2H-1,4-oxazine-2-ol (2). Characterization was performed using elemental analysis, UV-Vis and 1HNMR spectroscopy. The structure of this oxazine compound was determined by X-ray crystallography, and we ...

  11. Synthesis and Characterization of a Heterometallic Extended Architecture Based on a Manganese(II)-Substituted Sandwich-Type Polyoxotungstate.

    Science.gov (United States)

    Ibrahim, Masooma; Moreno-Pineda, Eufemio; Bergfeldt, Thomas; Anson, Christopher E; Powell, Annie K

    2018-01-17

    The reaction of [ α -P₂W 15 O 56 ] 12- with Mn II and Dy III in an aqueous basic solution led to the isolation of an all inorganic heterometallic aggregate Na 10 (OH₂) 42 [{Dy(H₂O)₆}₂Mn₄P₄W 30 O 112 (H₂O)₂]·17H₂O ( Dy₂Mn₄-P₂W 15 ). Single-crystal X-ray diffraction revealed that Dy₂Mn₄-P₂W 15 crystallizes in the triclinic system with space group P 1 ¯ , and consists of a tetranuclear manganese(II)-substituted sandwich-type phosphotungstate [Mn₄(H₂O)₂(P₂W 15 O 56 )₂] 16- ( Mn₄-P₂W 15 ), Na, and Dy III cations. Compound Dy₂Mn₄-P₂W 15 exhibits a 1D ladder-like chain structure based on sandwich-type segments and dysprosium cations as linkers, which are further connected into a three-dimensional open framework by sodium cations. The title compound was structurally and compositionally characterized in solid state by single-crystal XRD, powder X-ray diffraction (PXRD), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric (TGA), and elemental analyses. Further, the absorption and emission electronic spectra in aqueous solutions of Dy₂Mn₄-P₂W 15 and Mn₄-P₂W 15 were studied. Also, magnetic properties were studied and compared with the magnetic behavior of [Mn₄(H₂O)₂(P₂W 15 O 56 )₂] 16- .

  12. Synthesis and Characterization of a Heterometallic Extended Architecture Based on a Manganese(II-Substituted Sandwich-Type Polyoxotungstate

    Directory of Open Access Journals (Sweden)

    Masooma Ibrahim

    2018-01-01

    Full Text Available The reaction of [α-P2W15O56]12− with MnII and DyIII in an aqueous basic solution led to the isolation of an all inorganic heterometallic aggregate Na10(OH242[{Dy(H2O6}2Mn4P4W30O112(H2O2]·17H2O (Dy2Mn4-P2W15. Single-crystal X-ray diffraction revealed that Dy2Mn4-P2W15 crystallizes in the triclinic system with space group P 1 ¯ , and consists of a tetranuclear manganese(II-substituted sandwich-type phosphotungstate [Mn4(H2O2(P2W15O562]16− (Mn4-P2W15, Na, and DyIII cations. Compound Dy2Mn4-P2W15 exhibits a 1D ladder-like chain structure based on sandwich-type segments and dysprosium cations as linkers, which are further connected into a three-dimensional open framework by sodium cations. The title compound was structurally and compositionally characterized in solid state by single-crystal XRD, powder X-ray diffraction (PXRD, Fourier-transform infrared spectroscopy (FTIR, thermogravimetric (TGA, and elemental analyses. Further, the absorption and emission electronic spectra in aqueous solutions of Dy2Mn4-P2W15 and Mn4-P2W15 were studied. Also, magnetic properties were studied and compared with the magnetic behavior of [Mn4(H2O2(P2W15O562]16−.

  13. Monophasic zircon-type tetragonal Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution: synthesis, characterization, and optical properties

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Juan; Zhao, Zongyan [School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Wang, Yu’an [Shenzhen Water (Group) Co. Ltd., Shenzhen 518000 (China); Zhou, Dacheng; Ma, Chenshuo; Cao, Yuechan [School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Qiu, Jianbei, E-mail: qiu@kmust.edu.cn [School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650093 (China)

    2014-09-15

    Highlights: • Complete Eu{sub 1−x}Bi{sub x}VO{sub 4} with zircon-type structure was successfully synthesized. • The band gap of the samples could be adjusted and controlled by bismuth content. • Eu{sub 1−x}Bi{sub x}VO{sub 4} show strong red emission under both near UV and visible-light excitation. - Abstract: By combining the methods of co-precipitation and hydrothermal synthesis methods, the complete solid-solution of Eu{sub 1−x}Bi{sub x}VO{sub 4} with monophasic zircon-type structure was successfully synthesized. The zircon-type structure was determined by X-ray diffractometer and Raman scattering, and the optical properties were characterized by ultraviolet-visible diffuse reflectance and photoluminescence spectrophotometer. The results indicate that the band gap of Eu{sub 1−x}Bi{sub x}VO{sub 4} could be adjusted and controlled by bismuth content in the range of x = 0–0.9. Meanwhile, the Eu{sub 1−x}Bi{sub x}VO{sub 4} solid-solution phosphors show strong red light emission was shown in 619 nm under both near UV-light and visible-light excitation. Notably, the emission intensity of Eu{sub 1−x}Bi{sub x}VO{sub 4} (x = 0.4) is the strongest in all samples.

  14. Synthesis and characterization of an additive type super plasticizers obtained from plastics cups of polystyrene; Sintese e caracterizacao de um aditivo tipo superplastificantes obtido a partir de copos plasticos de poliestireno

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Carolina G.L.; Freire, Carolina B.; Tello, Cledola C. de O., E-mail: carolina_gabriela316@yahoo.com.br, E-mail: cbf@cdtn.br, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-BH), Belo Horizonte, MG (Brazil)

    2013-07-01

    This paper aims to describe the synthesis of an additive type superplasticizer from alternative material - plastic cups used of polystyrene - and characterize it physically and chemically in order to verify their efficiency and compare it with a commercial use superplasticizer. Following the search, the synthesized superplasticizer is used in mortars to assess their efficiency.

  15. Synthesis and Preliminary Characterization of a PPE-Type Polymer Containing Substituted Fullerenes and Transition Metal Ligation Sites

    Directory of Open Access Journals (Sweden)

    Corinne A. Basinger

    2015-01-01

    Full Text Available A substituted fullerene was incorporated into a PPE-conjugated polymer repeat unit. This subunit was then polymerized via Sonogashira coupling with other repeat units to create polymeric systems approaching 50 repeat units (based on GPC characterization. Bipyridine ligands were incorporated into some of these repeat units to provide sites for transition metal coordination. Photophysical characterization of the absorption and emission properties of these systems shows excited states located on both the fullerene and aromatic backbone of the polymers that exist in a thermally controlled equilibrium. Future work will explore other substituted polyaromatic systems using similar methodologies.

  16. Synthesis and Characterization of a Gel-Type Electrolyte with Ionic Liquid Added for Dye-Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Le-Yan Shi

    2013-01-01

    Full Text Available This study intends to develop the electrolyte needed in dye-sensitized solar cells (DSSCs. Moreover, three different ionic liquids in different molalities are added to the gel-type electrolyte. Experimental results show that the DSSC composed of the gel-type electrolyte with no ionic liquid added can acquire 4.13% photoelectric conversion efficiency. However, the DSSC composed of the gel-type electrolyte with 0.4 M of 1-butyl-3-methylimidazolium chloride added has an open-circuit voltage of 810 mV, a short-circuit current density of 9.56 mA/cm2, and photoelectric conversion efficiency reaching 4.89%. Comparing this DSSC with the DSSC with no ionic liquid added, the photoelectric conversion efficiency can be enhanced by 18.4%. As to durability, the DSSC composed of the gel-type electrolyte with ionic liquid added still has a photoelectric conversion efficiency of 3.28% on the 7th day after it is stored in an enclosed space and maintains 0.72% efficiency on the 14th day. When the proposed DSSC is compared with the DSSC prepared by using a liquid-type electrolyte, the durability of its photoelectric conversion efficiency can be increased by 7 times.

  17. Isolation, synthesis and characterization of ω-TRTX-Cc1a, a novel tarantula venom peptide that selectively targets L-type Cav channels.

    Science.gov (United States)

    Klint, Julie K; Berecki, Géza; Durek, Thomas; Mobli, Mehdi; Knapp, Oliver; King, Glenn F; Adams, David J; Alewood, Paul F; Rash, Lachlan D

    2014-05-15

    Spider venoms are replete with peptidic ion channel modulators, often with novel subtype selectivity, making them a rich source of pharmacological tools and drug leads. In a search for subtype-selective blockers of voltage-gated calcium (CaV) channels, we isolated and characterized a novel 39-residue peptide, ω-TRTX-Cc1a (Cc1a), from the venom of the tarantula Citharischius crawshayi (now Pelinobius muticus). Cc1a is 67% identical to the spider toxin ω-TRTX-Hg1a, an inhibitor of CaV2.3 channels. We assembled Cc1a using a combination of Boc solid-phase peptide synthesis and native chemical ligation. Oxidative folding yielded two stable, slowly interconverting isomers. Cc1a preferentially inhibited Ba(2+) currents (IBa) mediated by L-type (CaV1.2 and CaV1.3) CaV channels heterologously expressed in Xenopus oocytes, with half-maximal inhibitory concentration (IC50) values of 825nM and 2.24μM, respectively. In rat dorsal root ganglion neurons, Cc1a inhibited IBa mediated by high voltage-activated CaV channels but did not affect low voltage-activated T-type CaV channels. Cc1a exhibited weak activity at NaV1.5 and NaV1.7 voltage-gated sodium (NaV) channels stably expressed in mammalian HEK or CHO cells, respectively. Experiments with modified Cc1a peptides, truncated at the N-terminus (ΔG1-E5) or C-terminus (ΔW35-V39), demonstrated that the N- and C-termini are important for voltage-gated ion channel modulation. We conclude that Cc1a represents a novel pharmacological tool for probing the structure and function of L-type CaV channels. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Synthesis and characterization of type silicoaluminophosphates catalytic support; Sintese e caracterizacao de suportes cataliticos do tipo silicoaluminofosfatico

    Energy Technology Data Exchange (ETDEWEB)

    Leite, C.E.T.; Carvalho, M.W.N.C.; Pereira, K.R.O., E-mail: carlosedisio@hotmail.co [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia Quimica. Lab. de Catalise, Adsorcao e Biocombustiveis

    2010-07-01

    The refining processes, the catalytic hydrocracking is the future of diesel oil in Brazil and the first units are already scheduled to be inaugurated. Among the catalysts used in this process, silicoaluminophosphates (SAPO's) have considerable potential for use as they have been effective in the isomerization of n-alkanes, the isomerization of olefins and alkylation of aromatics. Because of this, the objective is to develop catalysts that will be used in hydrocracking reactions. The media like SAPO-5 were synthesized with different ratios silicon/aluminum, which is used as a catalytic support and have the function of crack organic molecules, since it has acidic character. The materials were characterized by techniques: X-ray diffraction, chemical analysis and textural by BET. After summarizing the media found that they had agreements with the crystalline phases presented in the literature.(author)

  19. Gallium(III)-Containing, Sandwich-Type Heteropolytungstates: Synthesis, Solution Characterization, and Hydrolytic Studies toward Phosphoester and Phosphoanhydride Bond Cleavage.

    Science.gov (United States)

    Kandasamy, Balamurugan; Vanhaecht, Stef; Nkala, Fiona Marylyn; Beelen, Tessa; Bassil, Bassem S; Parac-Vogt, Tatjana N; Kortz, Ulrich

    2016-09-19

    The gallium(III)-containing heteropolytungstates [Ga4(H2O)10(β-XW9O33)2](6-) (X = As(III), 1; Sb(III), 2) were synthesized in aqueous acidic medium by reaction of Ga(3+) ions with the trilacunary, lone-pair-containing [XW9O33](9-). Polyanions 1 and 2 are isostructural and crystallized as the hydrated sodium salts Na6[Ga4(H2O)10(β-AsW9O33)2]·28H2O (Na-1) and Na6[Ga4(H2O)10(β-SbW9O33)2]·30H2O (Na-2) in the monoclinic space group P21/c, with unit cell parameters a = 16.0218(12) Å, b = 15.2044(10) Å, c = 20.0821(12) Å, and β = 95.82(0)°, as well as a = 16.0912(5) Å, b = 15.2178(5) Å, c = 20.1047(5) Å, and β = 96.2(0)°, respectively. The corresponding tellurium(IV) derivative [Ga4(H2O)10(β-TeW9O33)2](4-) (3) was also prepared, by direct reaction of sodium tungstate, tellurium(IV) oxide, and gallium nitrate. Polyanion 3 crystallized as the mixed rubidium/sodium salt Rb2Na2[Ga4(H2O)10(β-TeW9O33)2]·28H2O (RbNa-3) in the triclinic space group P1̅ with unit cell parameters a = 12.5629(15) Å, b = 13.2208(18) Å, c = 15.474(2) Å, α = 80.52(1)°, β = 84.37(1)°, and γ = 65.83(1)°. All polyanions 1-3 were characterized in the solid state by single-crystal XRD, FT-IR, TGA, and elemental analysis, and polyanion 2 was also characterized in solution by (183)W NMR and UV-vis spectroscopy. Polyanion 2 was used as a homogeneous catalyst toward adenosine triphosphate (ATP) and the DNA model substrate 4-nitrophenylphosphate, monitored by (1)H and (31)P NMR spectroscopy. The encapsulated gallium(III) centers in 2 promote the Lewis acidic synergistic activation of the hydrolysis of ATP and DNA model substrates at a higher rate in near-physiological conditions. A strong interaction of 2 with the P-O bond of ATP was evidenced by changes in chemical shift values and line broadening of the (31)P nucleus in ATP upon addition of the polyanion.

  20. Synthesis and characterization of poly(vinylchloride type macrophotoinitiator comprising side-chain thioxanthone via click chemistry

    Directory of Open Access Journals (Sweden)

    2011-04-01

    Full Text Available Nowadays, the use of macromolecular photoinitiators provides for a good compatibility of the initiator in the formulation. Moreover, the migration of the initiator to the surface of the material is prevented, which results in low-odor and non-toxic coatings. In the present study, it has been demonstrated that polyvinylchloride macrophotoinitiator (PVC-TX containing side chain thioxanthone (2% moieties were successfully prepared by 'click chemistry'. For this purpose, propargyl thioxanthone and polyvinylchloride with side chain azide moieties were reacted in N,N-dimethylformamide for 24 hours at 25°C in order to give corresponding macrophotoinitiator. The synthesized polymer was characterized by 1H-NMR (nuclear magnetic resonance, UV (ultraviolet and fluorescence spectroscopies and water based gel permeation chromatography. Obtained macrophotoinitiator has similar absorption characteristics compared to parent thioxanthone. Its capabilities to act as initiator for the photopolymerization of methacrylic acid, methyl methacrylate, N-vinyl pyrrolidone and styrene in various solvents in the absence and presence of triethylamine media were also examined.

  1. Synthesis and characterization of Taurine

    Directory of Open Access Journals (Sweden)

    B Bayarmaa

    2014-10-01

    Full Text Available Have been obtained 2-aminoethanesulfonic acid (taurine from ethanolamine, sulfuric acid and sodium sulfite during the synthesis in laboratory condition. The process involves two steps of reactions, the first was esterification of ethanolamine with sulfuric acid to produce the intermediate product of 2-aminoethyl ester which than was extended to the second step by sulfonation with sodium sulfite to produce 2-aminoethanesulfonic acid. Resulting product was analyzed using 1H-NMR, IR, FAB-MS analysis and examined purity characterizations of the synthesized products. DOI: http://dx.doi.org/10.5564/mjc.v14i0.200 Mongolian Journal of Chemistry 14 (40, 2013, p57-60

  2. Synthesis and characterization of two novel chiral-type formate frameworks templated by protonated diethylamine and ammonium cations

    Science.gov (United States)

    Mączka, Mirosław; Gągor, Anna; Hanuza, Jerzy; Pikul, Adam; Drozd, Marek

    2017-01-01

    Two novel formate frameworks templated by ammonium and diethylammonium (DEtA+) cations have been synthesized. Chemical analysis as well as optical, Raman and IR studies showed partial substitution of nickel ions by Cr(III) or Fe(III). X-ray diffraction revealed that these compounds crystallize in the chiral-type structure of P6322 symmetry. The oxygen atoms from formate ligands form octahedral coordination around the metal centers and the octahedra are bridged by the formate groups in the anti-anti mode configuration forming the hexagonal structure with large channels expanding along the c direction. The channels are filled with disordered DEtA+ and NH4+ ions and they show unusual compression with the c/a ratio of only 0.862 and 0.852 for the iron- and chromium-containing compound, respectively. Magnetic studies revealed that the both compounds order magnetically at low temperatures but the ordering temperature is significantly higher for the iron compound (37 K) compared to the chromium analogue (26 K).

  3. Synthesis and characterization of two novel chiral-type formate frameworks templated by protonated diethylamine and ammonium cations

    Energy Technology Data Exchange (ETDEWEB)

    Mączka, Mirosław, E-mail: m.maczka@int.pan.wroc.pl [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Box 1410, 50-950 Wrocław 2 (Poland); Gągor, Anna [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Box 1410, 50-950 Wrocław 2 (Poland); Hanuza, Jerzy [Department of Bioorganic Chemistry, University of Economics, 53 345 Wroclaw (Poland); Pikul, Adam; Drozd, Marek [Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Box 1410, 50-950 Wrocław 2 (Poland)

    2017-01-15

    Two novel formate frameworks templated by ammonium and diethylammonium (DEtA{sup +}) cations have been synthesized. Chemical analysis as well as optical, Raman and IR studies showed partial substitution of nickel ions by Cr(III) or Fe(III). X-ray diffraction revealed that these compounds crystallize in the chiral-type structure of P6{sub 3}22 symmetry. The oxygen atoms from formate ligands form octahedral coordination around the metal centers and the octahedra are bridged by the formate groups in the anti-anti mode configuration forming the hexagonal structure with large channels expanding along the c direction. The channels are filled with disordered DEtA{sup +} and NH{sub 4}{sup +} ions and they show unusual compression with the c/a ratio of only 0.862 and 0.852 for the iron- and chromium-containing compound, respectively. Magnetic studies revealed that the both compounds order magnetically at low temperatures but the ordering temperature is significantly higher for the iron compound (37 K) compared to the chromium analogue (26 K). - Graphical abstract: Temperature dependence of magnetization M of DEtAFeNi showing magnetic order at 37 K. - Highlights: • Two novel chiral formates of P6{sub 3}22 symmetry were synthesized. • The structures contain strongly compressed hexagonal channels filled with disordered cations. • The obtained compounds exhibit magnetic order at low temperatures. • Raman, IR and absorption spectra prove incorporation of Cr(III) and Fe(III) in the frameworks.

  4. Two-dimensional carbon fundamental properties, synthesis, characterization, and applications

    CERN Document Server

    Yihong, Wu; Ting, Yu

    2013-01-01

    After a brief introduction to the fundamental properties of graphene, this book focuses on synthesis, characterization and application of various types of two-dimensional (2D) nanocarbons ranging from single/few layer graphene to carbon nanowalls and graphene oxides. Three major synthesis techniques are covered: epitaxial growth of graphene on SiC, chemical synthesis of graphene on metal, and chemical vapor deposition of vertically aligned carbon nanosheets or nanowalls. One chapter is dedicated to characterization of 2D nanocarbon using Raman spectroscopy. It provides extensive coverage for a

  5. Synthesis and Characterization of Novel Quaternary Thioaluminogermanates

    KAUST Repository

    Al-Bloushi, Mohammed

    2013-05-01

    Metal chalcogenides form an important class of inorganic materials, which include several technologically important applications. The design of metal chlcogenides is of technological interest and has encouraged recent research into moderate temperature solid-state synthetic methods for the single crystal growth of new materials. The aim of this project is the investigation and development of synthetic methodology for the synthesis of novel metal chlcogenides. The new inorganic compounds of the type “M(AlS2)(GeS2)” (M = Na and K) are new metal-chalcogenides, synthesized by the classical solid state approach. The characterization of these compounds was carried out by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Single crystal and powder X-ray diffraction, solid state Nuclear Magnetic Resonance (NMR), Ultraviolet-visible (UV-VIS), Infrared (IR) and Raman spectroscopy. These theses study the synthesis of metal chalcogenides through the use of standard chemical techniques. The systematic studies demonstrate the effect of the reactants ratio and reaction temperature on the synthesis and growth of the single crystals. Metal chalcogenides have several potential applications in gas separation, ion exchange, environmental remediation, and energy storage. Especially, the ion exchange materials have found\\tpossible applications in waste-water treatment, water softening, metal separation, and production of high purity water.

  6. Synthesis and characterization of saturated polyester and ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of saturated polyester and nanocomposites derived from glycolyzed PET waste ... construction industries. PET is widely used in the packaging of beverages and drugs. ... ing the synthesis of saturated polyester (from GPET waste). This has been done for the estimation of the maximum. 277 ...

  7. Synthesis, characterization and application of semiconducting oxide ...

    Indian Academy of Sciences (India)

    Nanostructured; Cu2O nanostructures; electrolysis based oxidation; aligned ZnO nanorods. Abstract. In the present study, we report the synthesis, characterization and application of nanostructured oxide materials. The oxide ... The copper electrode served as a sacrificial anode for the synthesis of different nanostructures.

  8. Synthesis, Characterization and Antibacterial Activity of Imidazole ...

    African Journals Online (AJOL)

    NICO

    Synthesis, Characterization and Antibacterial Activity of. Imidazole Derivatives of 1,10-Phenanthroline and their .... Synthesis of Ligands (L1, L2). Ligands (L1. , L2) were synthesized by a method similar to one ... (50 mL). Dropwise addition of concentrated aqueaus ammonia to neutralize gave a yellow precipitate, which was ...

  9. Synthesis and characterization of tetraethylammonium tetrachloro ...

    Indian Academy of Sciences (India)

    Unknown

    Synthesis and characterization of tetraethylammonium tetrachloro- cobaltate crystals. M A KANDHASWAMY and V SRINIVASAN*. Department of Physics, Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore 641 020, India. MS received 7 February 2000; revised 27 December 2001. Abstract.

  10. Biological synthesis and characterization of silver nanoparticles ...

    Indian Academy of Sciences (India)

    Biological synthesis and characterization of silver nanoparticles using. Eclipta alba leaf extract and evaluation of its cytotoxic and antimicrobial potential. PARAMASIVAM PREMASUDHA1, MUDILI VENKATARAMANA2,∗, MARRIAPPAN ABIRAMI3,. PERIYASAMY VANATHI4, KADIRVELU KRISHNA2 and RAMASAMY ...

  11. Synthesis and characterization of M-type barium hexferrite by ultrasonic inter-dispersion of chemical precipitate; Sintese e caracterizacao de hexaferrita de bario tipo M por interdispersao ultrassonica de precipitado quimico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Junior, E.S.; Gomes Junior, G.G.; Ogasawara, T., E-mail: edil@metalmat.ufrj.b [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Dept. de Eng. Metalurgica e Materiais

    2010-07-01

    This work is concerned with the study the synthesis and characterization of M-type barium hexaferrite powder by chemical precipitation type and ultrasonic interdispersion of precursor materials Fe(OH){sub 3} and Ba(OH){sub 2},separately and ultrasonic inter-dispersion, followed by drying and calcining. In order to guide the experimental work was carried out a preliminary thermodynamic analysis of the system Ba-Fe-H{sub 2}O at 25 deg C. The study shows that the phase formation of M-type barium hexaferrite is obtained at a calcination at 1000 deg C, characterized by X-ray diffraction, the grain growth of the final product of synthesis depending on the calcination temperature is visible by SEM. The synthesis method developed in this research is an option to achieve the results that would be obtained if the co-precipitation of ferric and barium hydroxide was thermodynamically possible, where you can get crystallization of barium hexaferrite in a calcination at 1000 deg C. (author)

  12. SYNTHESIS, CHARACTERIZATION AND DENSITY FUNCTIONAL ...

    African Journals Online (AJOL)

    Preferred Customer

    KEY WORDS: Monoacyl aniline, Synthesis, Density functional theory, Rotation barrier. INTRODUCTION ... on the electron density in the phenyl ring and the respective accelerating and decelerating effects on the rate of ... compounds were determined using Nujol mulls and of liquids either in dichloromethane or chloroform ...

  13. SYNTHESIS AND CHARACTERIZATION OF FUNCTIONALIZED ...

    African Journals Online (AJOL)

    2016-07-30

    E-mail: b_mohtat@yahoo.com. This work is licensed under the Creative Commons ... Department of Chemistry, Islamic Azad University, Karaj Branch, Karaj, Iran. (Received July 30, 2016; revised ..... Chem. 2013, 9, 2846-2851. 7. Mohamed, K.S.; Soliman, M.A.; El-Remaily, M.A.A.; Abdel-Ghany, H. Eco-friendly synthesis of ...

  14. Synthesis and characterization of dental composites

    Science.gov (United States)

    Djustiana, Nina; Greviana, Nadia; Faza, Yanwar; Sunarso

    2018-02-01

    During the last few decades, the increasing demands in esthetic dentistry have led to the development of dental composites material that provide similar appearance to the natural teeth. Recently, esthetic trend was an issue which increase the demand for teeth restorations that is similar with the origin. The esthetics of dental composite are more superior compared to amalgam, since its color look similar with natural teeth. Various dental composites have been developed using many type of fillers such as amorphous silica, quartz), borosilicate, Li-Sr-Ba-Al glass and oxide: zirconia and alumina. Researchers in Faculty of Dentistry University of Padjadjaran have prepared dental composites using zirconia-alumina-silica (ZAS) system as the filler. The aim is to improve the mechanical properties and the esthetic of the dental composites. The ZAS was obtained from chemical grade purity chemicals and Indonesia's natural sand as precursors its characterization were also presented. This novel method covers the procedure to synthesis and characterize dental composites in Padjadjaran University and some review about dental composites in global research.

  15. Synthesis and characterization of Ba0.5Pb0.5TiO3 perovskite - type thin films deposited by spin coating at low temperatures

    International Nuclear Information System (INIS)

    Wermuth, T.B.; Wiederkehr, N.A.; Alves, A.K.; Bergmann, C.P.

    2014-01-01

    In this paper we present a non-aqueous sol-gel route for the obtention of solid compounds and thin films of oxide type- perovskite ABO 3 , such as Ba 0.5 Pb 0.5 TiO 3 , synthesized by sol - gel route with subsequent heat treatment. The solid compounds were characterized by X-ray diffraction (XRD) techniques and thermal analysis (TGA / DTA). The thin film was obtained by using spin-coating techniques at low temperatures onto commercial substrates of polymethylmethacrylate (PMMA) and characterized by contact angle, atomic force microscopy (AFM) and scanning electron microscopy (SEM). The results show that the films present microstructures and roughness directly related to annealing temperatures, characterized by the formation of crystalline nanostructures with surface regularity and transparency. (author)

  16. Synthesis and characterization of polypyrrole grafted chitin

    Science.gov (United States)

    Ramaprasad, A. T.; Latha, D.; Rao, Vijayalakshmi

    2017-05-01

    Synthesis and characterization of chitin grafted with polypyrrole (PPy) is reported in this paper. Chitin is soaked in pyrrole solution of various concentrations for different time intervals and polymerized using ammonium peroxy disulphate (APS) as an initiator. Grafting percentage of polypyrrole onto chitin is calculated from weight of chitin before and after grafting. Grafting of polymer is further verified by dissolution studies. The grafted polymer samples are characterized by FTIR, UV-Vis absorption spectrum, XRD, DSC, TGA, AFM, SEM and conductivity studies.

  17. Biological synthesis and characterization of intracellular gold ...

    Indian Academy of Sciences (India)

    Nanoparticles are produced by various methods like physical, chemical, mechanical and biological. Biological me- thods of ... Stable nanoparticles were produced when an aqueous solution of chloroauric acid (HAuCl4) was reduced ... for the biomimetic synthesis and characterization of protein capped silver nanoparticles.

  18. Synthesis and optical characterization of copper nanoparticles ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 1. Synthesis and optical characterization of copper nanoparticles prepared by laser ablation. SAMIRA MONIRI MAHMOOD GHORANNEVISS MOHAMMAD REZA HANTEHZADEH MOHSEN ASADI ASADABAD. Volume 40 Issue 1 February 2017 pp 37-43 ...

  19. Synthesis and characterization of gold nanoparticles incorporated ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of gold nanoparticles incorporated bentonite clay for electrocatalytic sensing of arsenic(III). Pankaj Kumar Rastogi Dharmendra Kumar Yadav Shruti Pandey Vellaichamy Ganesan Piyush Kumar Sonkar Rupali Gupta. Regular Articles Volume 128 Issue 3 March 2016 pp 349-356 ...

  20. Synthesis, characterization, antimicrobial activity and molecular ...

    African Journals Online (AJOL)

    Synthesis, characterization, antimicrobial activity and molecular docking studies of combined pyrazol-barbituric acid pharmacophores. Assem Barakat, Bandar M. Al-Qahtani, Abdullah M. Al-Majid, M. Ali Mohammed Rafi Shaik, Mohamed H.M. Al-Agamy, Abdul Wadood ...

  1. Synthesis and characterization of a reduced heteropoly ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 114; Issue 2. Synthesis and characterization of a ... Shivaiah Samar K Das. Inorganic and Analytical Volume 114 Issue 2 April 2002 pp 107-114 ... Compound (1) crystallizes in a cubic space group 3 ¯ , with = 22.2001(6) Å and = 8. The anion [VVO4W 10 VI V 2 ...

  2. Synthesis, characterization and antimicrobial activity of mixed ...

    African Journals Online (AJOL)

    Synthesis, characterization and antimicrobial activity of mixed ascorbic acid - nicotinamide metal complexes. ... The result of the antimicrobial studies showed that the mixed complexes have higher inhibitory activity than the original ligands against the tested bacteria and fungi species. KEY WORDS: Ascorbic acid, ...

  3. Synthesis, spectroscopic characterization and catalytic oxidation ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 3. Synthesis, spectroscopic characterization and catalytic oxidation properties of ONO/ONS donor Schiff base ruthenium(III) complexes containing PPh3/AsPh3. Priyarega M Muthu Tamizh R Karvembu R Prabhakaran K Natarajan. Volume 123 Issue 3 May ...

  4. Synthesis, characterization and photochemistry of a new ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 9. Synthesis, characterization and photochemistry of a new heptamolybdate supported magnesium-aqua coordination complex. Savita S Khandolkar Pallepogu Raghavaiah Bikshandarkoil R Srinivasan. Volume 127 Issue 9 September 2015 pp 1581-1588 ...

  5. HYDROTHERMAL SYNTHESIS AND CHARACTERIZATION OF A ...

    African Journals Online (AJOL)

    Preferred Customer

    HYDROTHERMAL SYNTHESIS AND CHARACTERIZATION OF A BINUCLEAR. COMPLEX AND A COORDINATION POLYMER OF COPPER(II). Masoumeh Tabatabaee1*, Reza Mohamadinasab1, Kazem Ghaini1 and Hamid Reza Khavasi2. 1Department of Chemistry, Islamic Azad University, Yazd Branch, Yazd, Iran.

  6. Synthesis, characterizations and applications of some nanomaterials

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 65; Issue 4. Synthesis, characterizations and applications of some nanomaterials (TiO2 and SiC nanostructured films, organized CNT structures, ZnO structures and CNT{blood platelet clusters). O N Srivastava A Srivastava D Dash D P Singh R M Yadava P R Mishra J ...

  7. Synthesis, characterization and photoluminescence properties of ...

    Indian Academy of Sciences (India)

    Synthesis of a new nano hybrid of 5,10,15,20-mesotetra(4-aminophenyl) porphyrin (TAP) functionalized with multi-walled carbon nanotubes (MWCNTs) through an amide linkage is reported for the first time. ThisMWCNT-TAP hybrid was characterized by Raman, Fourier transform infrared (FT-IR), Transmissionelectron ...

  8. Synthesis, characterization and electrochemical performance of ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 6. Synthesis, characterization and electrochemical performance of Li 2 Ni x Fe 1 − x SiO 4 cathode materials for lithium ion batteries. A Y SHENOUDA M M S SANAD. Volume 40 Issue 6 October 2017 pp 1055-1060 ...

  9. Synthesis, characterization and antibacterial evaluation of ...

    African Journals Online (AJOL)

    The synthesis, characterization and anti-bacterial evaluation of two palmitoyl amino acids is reported in this work. The reported antimicrobial activity of some fatty acid derivatives encouraged the investigation of the possible influence of an aromatic group substituent on a saturated fatty acid residue. The compounds were ...

  10. Synthesis, characterizations and applications of some ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 65; Issue 4. Synthesis, characterizations and applications of some nanomaterials (TiO2 and SiC nanostructured films, organized CNT structures, ZnO structures and CNT{blood platelet clusters). O N Srivastava A Srivastava D Dash D P Singh R M Yadava P R Mishra J ...

  11. Zeolite from fly ash: synthesis and characterization

    Indian Academy of Sciences (India)

    Unknown

    disposal or to minimize the environmental impact. One of the approaches is the conversion of fly ash to zeolites, which have wide applications in ion exchange, as mole- cular sieves, catalysts, and adsorbents (Breck 1974). The present study is concerned with the synthesis of zeolite from coal fly ash and its characterization ...

  12. Synthesis, Characterization and Antibacterial Evaluations of the ...

    African Journals Online (AJOL)

    MBI

    2014-06-05

    Jun 5, 2014 ... 39. Synthesis, Characterization and Antibacterial Evaluations of the Schiff. Base 2-(1-(2-(Piperazin-1-yl)ethylimino)ethyl)Phenol and its Complexes of. Mn(II), Ni(II) and Zn(II). Salga, M. S., Sada, I. and Abdullahi, A. Department of Pure and Industrial Chemistry, Umaru Musa 'Yar Adua University, Katsina.

  13. synthesis, characterization, thermal behavior and antimicrobial

    African Journals Online (AJOL)

    The present work deals with the synthesis and characterization of Co, Ni, Cd, Zn and Cu(II) complexes of 3-methyl benzoic acid with/without hydrazine. EXPERIMENTAL. The chemicals and solvents used were of AR grade received from Fluka Chemicals. The double distilled water was used for the preparation and chemical ...

  14. Synthesis and characterization of a reduced heteropoly ...

    Indian Academy of Sciences (India)

    Pope and Flynn reported a series of such compounds of the general formula VtVnW12−n. −+. )3(. 40. O n. (where Vt is the vanadium in the center of the tertrahedron, n = 2, 3, 4)5,6. The synthesis and characterization of these heteropolytungstovanadates have been described many years ago, but the reduced analogue of ...

  15. Synthesis and Structural Characterization of a CHA-type AlPO4Molecular Sieve with Penta-Coordinated Framework Aluminum Atoms.

    Science.gov (United States)

    Park, Gi Tae; Jo, Donghui; Ahn, Nak Ho; Cho, Jung; Hong, Suk Bong

    2017-07-17

    The structure-directing effects of a series of polymethylimidazolium cations with different numbers of methyl groups as organic structure-directing agents (OSDAs) in the synthesis of aluminophosphate (AlPO 4 )-based molecular sieves in both fluoride and hydroxide media are investigated. On the one hand, among the OSDAs studied here, the smallest 1,3-dimethylimidazolium and the largest 1,2,3,4,5-pentamethylimidazolium cations were found to direct the synthesis of a new variant of the triclinic chabazite (CHA)-type AlPO 4 material, designated AlPO 4 -34(t) V , and the one-dimensional small-pore silicoaluminophosphate (SAPO) molecular sieve STA-6 in hydroxide media, respectively. On the other hand, the intermediate-sized 1,2,3,4-tetramethylimidazolium cation gave SSZ-51, a two-dimensional large-pore SAPO material, in fluoride media. Synchrotron powder X-ray diffraction and Rietveld analyses reveal that as-made AlPO 4 -34(t) V contains penta-coordinated framework Al species connected by hydroxyl groups, as well as tetrahedral framework Al, which contrasts with the distortions arising from the two F - or OH - bridges between octahedral Al atoms in all already known AlPO 4 -34 materials. The presence of Al-OH-Al linkages in this triclinic AlPO 4 -34 molecular sieve has been further corroborated by thermal analysis, variable-temperature IR,27Al magic-angle spinning NMR, and dispersion-corrected density functional theory calculations.

  16. A microwave route for the synthesis of nanoflakes and dendrites-type beta-ln2S3 and their characterization.

    Science.gov (United States)

    Patra, Chitta Ranjan; Patra, Sujata; Gabashvili, Alexandra; Mastai, Yitzhak; Koltypin, Yuri; Gedanken, Aharon; Palchik, Valery; Slifkin, Michael A

    2006-03-01

    In this article, a simple microwave route was applied for the synthesis of nanoflakes and dendrite-type beta-indium sulfide (In2S3) in high yield (> 97%), using a homogeneous mixture of indium(lll)chloride and thiourea in an ethylene glycol (EG)/polyethylene glycol (PEG400) solvent. The reaction was conducted in a simple domestic microwave oven (DMO). Powder X-ray diffraction (XRD), low resolution and high resolution transmission electron microscopy (LRTEM and HRTEM), selected area electron diffraction (SAED), and energy dispersive X-ray spectroscopy (EDS), were applied to investigate the crystallinity, structure, morphology, and composition of the In2S3 nano-materials. Both the as-synthesized and calcined In2S3 products were a body-centered tetragonal (bct) phase, observed by XRD and HRTEM. The length and width of the resulting nanoflakes were in the range of 70-600 nm and 4-10 nm, respectively. The optical band gap of the powder was determined by diffuse reflectance spectroscopy (DRS) and was found to be 2.44 eV. The electronic properties of the products were studied by measuring the optical absorption spectra using photoacoustic spectroscopy. The band gap calculated by this method was found to be 2.52 eV. A possible mechanism for the formation of nanoflakes/dendrites-type In2S3 was also discussed.

  17. Synthesis, Properties Characterization and Applications of Various Organobismuth Compounds

    Directory of Open Access Journals (Sweden)

    Jingfei Luan

    2011-05-01

    Full Text Available Organobismuth chemistry was emphasized in this review article due to the low price, low toxicity and low radioactivity characteristics of bismuth. As an environmentally-friendly class of organometallic compounds, different types of organobismuth compounds have been used in organic synthesis, catalysis, materials, etc. The synthesis and property characterization of many organobismuth compounds had been summarized. This review article also presented a survey of various applications of organobismuth compounds in organic transformations, as reagents or catalysts. The reactivity, reaction pathways and mechanisms of reactions with organobismuths were discussed. Less common and limiting aspects of organobismuth compounds were also briefly mentioned.

  18. Synthesis, characterization, photoluminescence and thermally ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. Sm3+-doped ZnAl2O4 phosphor was synthesized by citrate sol–gel method and characterized using. X-ray diffraction and scanning electron microscopy to identify the crystalline phase and determine the parti- cle size. Photoluminescence (PL) studies on the sample showed emission peaks at 563, 601, 646 and ...

  19. SYNTHESIS AND CHARACTERIZATION OF NANOCOMPOSITE ...

    African Journals Online (AJOL)

    ABSTRACT. In this work, nano ferrite spinel NiFe2O4 was synthesized by sol-gel method and characterized by. SEM, XRD, FT-IR, and VSM. In second step Schiff base made from salicylaldehyde and amino propyl triethoxy silane was used for modification of the synthesized nano ferrit. In the third step removal of Ni(II) was ...

  20. Synthesis, characterization, photoluminescence and thermally ...

    Indian Academy of Sciences (India)

    Administrator

    grinding and heating in (Ar + 10% H2) atmosphere. 2.2 Sample characterization. The as-synthesized ... with literature value of cell parameter a = 8⋅059 A. No impurity phase was observed. The XRD pattern was ..... are thankful to Dr N D Dahale, Fuel Chemistry Division,. BARC, Dr T K Seshagiri, former scientist, and Shri.

  1. Electronic, electrical and magnetic ceramics synthesis and characterization

    International Nuclear Information System (INIS)

    Calix, V.S.; Saligan, P.P.; Naval, P.C.

    1989-01-01

    This paper describes the research and development activities of the Philippine Nuclear Research Institute (PNRI) on the synthesis and characterization of soft and hard ferrites and some beta alumina type superionic conductor materials. XRD, XRF and Moessbauer effect spectrometry are used to determine the structure phases, compositions and some magnetic properties of the materials. Effects of composition and preparation methods on the bulk electronic and magnetic properties are also discussed. (Auth.). 6 figs.; 3 tabs

  2. Synthesis of type A zeolite from calcinated kaolin

    International Nuclear Information System (INIS)

    Rodrigues, E.C.; Neves, R.F.; Souza, J.A.S.; Moraes, C.G.; Macedo, E.N.

    2011-01-01

    The mineral production has caused great concern in environmental and industrial scenario due to the effects caused to the environment. The industries of processing kaolin for paper are important economically for the state of Para, but produce huge quantities of tailings, which depend on large areas to be stocked. This material is rich in silico-aluminates can be recycled and used as raw material for other industries. The objective is to synthesize zeolite A at different temperatures of calcination and synthesis. The starting materials and synthesis of zeolite A have been identified and characterized through analysis of X-ray diffraction (DRX) and scanning electron microscopy (MEV). The synthesis process of zeolite A, using as source of silica and the aluminum metakaolin, which was calcined at temperatures of 700 ° C and 800 ° C for 2 hours of landing in a burning furnace type muffle. Observed in relation to the calcination of kaolin as the main phase, the metakaolin. This is just a removal of water from its structure, so we opted for the lower temperature, less energy consumption. The synthesis process of zeolite A, produced good results for the formation of zeolites type A, which were characterized with high purities. (author)

  3. Photocatalytic semiconductors synthesis, characterization, and environmental applications

    CERN Document Server

    Hernández-Ramírez, Aracely

    2014-01-01

    This critical volume examines the different methods used for the synthesis of a great number of photocatalysts, including TiO2, ZnO and other modified semiconductors, as well as characterization techniques used for determining the optical, structural and morphological properties of the semiconducting materials. Additionally, the authors discuss photoelectrochemical methods for determining the light activity of the photocatalytic semiconductors by means of measurement of properties such as band gap energy, flat band potential and kinetics of hole and electron transfer. Photocatalytic Semiconductors: Synthesis, Characterization and Environmental Applications provide an overview of the semiconductor materials from first- to third-generation photocatalysts and their applications in wastewater treatment and water disinfection. The book further presents economic and toxicological aspects in the production and application of photocatalytic materials.

  4. Polypyrrole-silver Nanocomposite: Synthesis and Characterization

    OpenAIRE

    D. M. Nerkar; S. V. Panse; S. P. Patil; S. E. Jaware; G. G. Padhye

    2016-01-01

    Polypyrrole-Silver (PPy-Ag) nanocomposite has been successfully synthesized by the chemical oxidative polymerization of pyrrole with iron (III) chloride as an oxidant, in the presence of a colloidal suspension of silver nanoparticles. Turkevich method (Citrate reduction method) was used for the synthesis of silver nanoparticles (Ag NPs). The silver nanoparticles were characterized by UV-Visible spectroscopy which showed an absorption band at 423 nm confirming the formation of nanoparticles. P...

  5. Synthesis, structural and electrical characterizations of thermally ...

    African Journals Online (AJOL)

    Synthesis, structural and electrical characterizations of thermally evaporated Cu 2 SnS 3 thin films. ... The surface profilometer shows that the deposited films are rough. The XRD spectra identified the ... The electrical resistivity of the deposited Cu2SnS3 film is 2.55 x 10-3 Ωcm. The conductivity is in the order of 103 Ω-1cm-1.

  6. Synthesis and characterization of -phosphorylated thioureas ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 122; Issue 3. Synthesis and characterization of -phosphorylated thioureas RNHC(S)NHP(O)(OPr)2 (R = 2-MeC6H4, 2,6-Me2C6H3, 2,4,6-Me3C6H2). Damir A Safin Maria G Babashkina Michael Bolte Axel Klein. Full Papers Volume 122 Issue 3 May 2010 pp 409- ...

  7. Synthesis and characterization of a reduced heteropoly ...

    Indian Academy of Sciences (India)

    compounds of the general formula VtVnW12−n. −+. )3(. 40. O n. (where Vt is the vanadium in the center of the tertrahedron, n = 2, 3, 4)5,6. The synthesis and characterization of these heteropolytungstovanadates have been described many years ago, but the reduced analogue of any of these in the series has yet to be ...

  8. Synthesis and characterization of new ionic liquids

    International Nuclear Information System (INIS)

    Oliveira, L.M.C. de; Mattedi, S.; Boaventura, J.S.; Iglesias, M.; Universidad de Santiago de Compostela

    2010-01-01

    In recent years, ionic liquids have been highlighted for its potential in various industrial applications. Among them, the salts of Broensted has a promising profile for the low toxicity, low cost and simple synthesis. This paper presents the synthesis and characterization of new salts of Bronsted with branched (lactate) or large chain anions (oleate) for future use as additives promoters of proton conductivity in fuel cells of ethanol. Experimental data were measured for density, sound velocity and conductivity of pure ionic liquids and mixtures. The density decreases linearly with increasing temperature, and sound velocity shows a similar trend, but not linear. The conductivity increases according to the Arrhenius model with activation energy less than 10 J/mol. Tests NMR, FTIR and TGA confirm ionic structure and thermal stability up to 165 deg C. (author)

  9. Synthesis, Characterization, In Vitro Evaluation, and Preclinical Profiling of beta-Cyclodextrin Polyrotaxane Families for Use As Potential Niemann-Pick Type C Therapeutics

    Science.gov (United States)

    Collins, Christopher J.

    Niemann-Pick Disease Type C (NPC) is a rare, autosomal recessive genetic disorder featuring a loss of proteins responsible for unesterified cholesterol (UC) trafficking through the late endosomes/lysosomes (LE/LY) of every cell of the body. Disruption of this pathway leads to abnormal accumulation and storage of UC and other lipids. A broad range of visceral and neurological symptoms result from this accumulation exhibiting a variable age of onset and a disease progression that is ultimately fatal. The disease has an incidence of approximately 1 in 120,000 live births and has no known effective treatment. beta-Cyclodextrin (beta-CD) are natural small molecules macrocycles composed of glucose units with a hydrophobic inner cavity and hydrophilic outer rims. beta-CD derivatives have recently been shown to be effective therapeutics for NPC in cellular and animal models. In the mouse model of the disease, beta-CD therapy increases overall lifetime by as much as 50% and slows the progression of neurodegeneration. The progress has led to the initiation of a National Institutes of Health phase I clinical trial. A main drawback of beta-CD administration is the poor pharmacokinetic profile characterized by rapid renal clearance of the drug through the urine. Libraries of beta-CD derivative carrying high molecular weight polyrotaxane (PR) systems have been designed to prevent glomerular filtration of the injected beta-CD dose. An initial family of unmodified beta-CD PRs was synthesized, characterized, and their therapeutic efficacy was tested in NPC fibroblasts. This was followed by screening of PRs consisting of mixed beta-CD derivative threading featuring charged sulfobutylether beta-CD. Finally, we sought to define PR structure-property effects on in vivo pharmacokinetics, biodistribution, toxicity, immunogenicity, and protein hard corona composition. This was accomplished using a family of gadolinium carrying PRs composed of triblock Pluronic co-polymers of varying

  10. Graphene optoelectronics synthesis, characterization, properties, and applications

    CERN Document Server

    bin M Yusoff, Abdul Rashid

    2014-01-01

    This first book on emerging applications for this innovative material gives an up-to-date account of the many opportunities graphene offers high-end optoelectronics.The text focuses on potential as well as already realized applications, discussing metallic and passive components, such as transparent conductors and smart windows, as well as high-frequency devices, spintronics, photonics, and terahertz devices. Also included are sections on the fundamental properties, synthesis, and characterization of graphene. With its unique coverage, this book will be welcomed by materials scientists, solid-

  11. Design, synthesis, characterization and study of novel conjugated polymers

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Wu [Iowa State Univ., Ames, IA (United States)

    1997-06-24

    After introducing the subject of conjugated polymers, the thesis has three sections each containing a literature survey, results and discussion, conclusions, and experimental methods on the following: synthesis, characterization of electroluminescent polymers containing conjugated aryl, olefinic, thiophene and acetylenic units and their studies for use in light-emitting diodes; synthesis, characterization and study of conjugated polymers containing silole unit in the main chain; and synthesis, characterization and study of silicon-bridged and butadiene-linked polythiophenes.

  12. Synthesis and characterization of peapods and DWCNTs

    Energy Technology Data Exchange (ETDEWEB)

    Anis, B.; Kuntscher, C.A. [Experimentalphysik 2, Universitaet Augsburg, 86195 Augsburg (Germany); Fischer, M.; Schreck, M. [Experimentalphysik 4, Universitaet Augsburg, 86195 Augsburg (Germany); Haubner, K.; Dunsch, L. [Center of Spectroelectrochemistry, IFW Dresden, P.O. Box 270116, 01171 Dresden (Germany)

    2012-12-15

    We report the synthesis and characterization of C{sub 60} rate at SWCNT peapods and double-walled carbon nanotubes (DWCNTs) derived from the peapods. Single-walled carbon nanotubes (SWCNTs), C{sub 60} rate at SWCNT peapods, and DWCNTs were characterized by Raman and optical spectroscopy. The radial breathing modes (RBMs) of the tubes in C{sub 60} rate at SWCNT peapods are shifted to higher energies compared to the RBMs in SWCNTs, while in the case of DWCNTs the RBMs related to the outer tubes are shifted to lower energies compared to SWCNTs. A similar trend is observed for the absorption bands. These results suggest that the filling of the SWCNTs with C{sub 60} molecules decreases the average diameter of the electron cloud around the tubes, whereas the filling with an inner tube increases it. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Synthesis and structural characterization of amorphous alloys of the Fe-Ni-B type; Sintesis y caracterizacion estructural de aleaciones amorfas del tipo Fe-Ni-B

    Energy Technology Data Exchange (ETDEWEB)

    Cabral P, A.; Jimenez B, J.; Garcia S, I. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2004-07-01

    It was prepared the alloy FeNiB for chemical reduction, using four p H values (5, 6, 7 and 7.5). To p H=6 partially oxidized particles were obtained, between 16 and 20%. In the synthesis to other p H values, the obtained particles were highly oxidized (65-90%) according to the X-ray diffraction results, in all the preparations the particles were partially crystallized, with crystal size that varied between 4 and 10 nm. The structure of these particles can be consider that they are formed by a nucleus due to the alloy and an oxide armor recovering it. (Author)

  14. Synthesis, Transfer, and Characterization of Nanoscale 2-Dimensional Materials

    Science.gov (United States)

    2015-09-01

    stack is floating on top of the DDI water surface. Instead of removing the stack with the target substrate, a graphene/copper foil substrate (graphene...demonstrated the synthesis of graphene, hexagonal boron nitride, and bismuth telluride using chemical and physical vapor deposition techniques. Making...for material synthesis, transfer, and characterization. 15. SUBJECT TERMS graphene, hexagonal boron nitride, bismuth telluride, synthesis, transfer

  15. Selective synthesis of FAU-type zeolites

    Science.gov (United States)

    Garcia, Gustavo; Cabrera, Saúl; Hedlund, Jonas; Mouzon, Johanne

    2018-05-01

    In the present work, parameters influencing the selectivity of the synthesis of FAU-zeolites from diatomite were studied. The final products after varying synthesis time were characterized by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and gas adsorption. It was found that high concentrations of NaCl could completely inhibit the formation of zeolite P, which otherwise usually forms as soon as maximum FAU crystallinity is reached. In the presence of NaCl, the FAU crystals were stable for extended time after completed crystallization of FAU before formation of sodalite. It was also found that addition of NaCl barely changed the crystallization kinetics of FAU zeolite and only reduced the final FAU particle size and SiO2/Al2O3 ratio slightly. Other salts containing either Na or Cl were also investigated. Our results suggest that there is a synergistic effect between Na+ and Cl-. This is attributed to the formation of (Na4Cl)3+ clusters that stabilize the sodalite cages. This new finding may be used to increase the selectivity of syntheses leading to FAU-zeolites and avoid the formation of undesirable by-products, especially if impure natural sources of aluminosilica are used.

  16. Synthesis and structural and thermodynamical characterization of hollandite type material intended for the specific containment of cesium; Synthese et caracterisation de ceramiques de type hollandite destinees au conditionnement specifique du cecium

    Energy Technology Data Exchange (ETDEWEB)

    Leinekugel-Le-Cocq-Errien, A.Y

    2005-09-15

    This thesis deals with the characterization of the Ba{sub 1}Cs{sub 0.28}Fe{sub 0.82}Al{sub 1.46}Ti{sub 5.72}O{sub 16} hollandite envisaged for Cs containment. Techniques used are essentially classical powder XRD or synchrotron radiation at the absorption threshold of Ba and Cs, TEM and high-temperature calorimetry. Two syntheses have been studied: an alcoxide route and a dry route. After sintering, both routes lead to an incommensurate modulated tetragonal hollandite structure (space group: I4/m(00{gamma})00) with a modulation vector distribution. Before sintering, the material obtained by the alcoxide route is composed of three phases: a tetragonal hollandite like above, a monoclinic Ba-free hollandite and a weak-coherence-length phase containing only Ba. On contrary, the dry route already leads to the tetragonal hollandite at this step of the synthesis. High temperature oxide melt solution calorimetry was used to derive standard enthalpy of formation of hollandite to deduce its free enthalpy of formation. (author)

  17. Synthesis and characterization of n-type NiO:Al thin films for fabrication of p-n NiO homojunctions

    Science.gov (United States)

    Sun, Hui; Liao, Ming-Han; Chen, Sheng-Chi; Li, Zhi-Yue; Lin, Po-Chun; Song, Shu-Mei

    2018-03-01

    n-type NiO:Al thin films were deposited by RF magnetron sputtering. Their optoelectronic properties versus Al target power was investigated. The results show that with increasing Al target power, the conduction type of NiO films changes from p-type to n-type. The variation of the film’s electrical and optical properties depends on Al amount in the film. When Al target power is relatively low, Al3+ cations tend to enter nickel vacancy sites, which makes the lattice structure of NiO more complete. This improves the carrier mobility and film’s transmittance. However, when Al target power exceeds 40 W, Al atoms begin to enter into interstitial sites and form an Al cluster in the NiO film. This behavior is beneficial for improving the film’s n-type conductivity but degrades the film’s transmittance. Finally, Al/(p-type NiO)/(n-type NiO:Al)/ITO homojunctions were fabricated. Their performance was compared with Al/(p-type NiO)/ITO heterojunctions without an n-type NiO layer. Thanks to the better interface quality between the two NiO layers, the homojunctions present better performance.

  18. Flame synthesis and characterization of nanocrystalline titania powders

    Directory of Open Access Journals (Sweden)

    Bhaskaran Manjith Kumar

    2012-09-01

    Full Text Available Flame reactors are considered to be one of the most promising and versatile synthesis routes for the largescale production of submicron and nanosized particles. An annular co-flow type oxy-gas diffusion burner was designed for its application in a modular flame reactor for the synthesis of nanocrystalline oxide ceramics. The burner consisted of multiple ports for the individually regulated flow of a precursor vapour, inert gas, fuel gas and oxidizer. The nanopowders formed during flame synthesis in the reaction chamber were collected by a suitable set of filters. In the present study, TTIP was used as the precursor for the synthesis of nanocrystalline TiO2 and helium was used to carry the precursor vapour to the burner head. Methane and oxygen were used as fuel and oxidizer respectively. The operating conditions were varied by systematically changing the flow rates of the gases involved. The synthesized powders were characterized using standard techniques such as XRD, SEM, TEM, BET etc., in order to determine the crystallite size, phase content, morphology, particle size and degree of agglomeration. The influences of gas flow rates on the powder characteristics are discussed.

  19. Synthesis and Characterization of a Schiff Base Cobalt (III) Complex ...

    African Journals Online (AJOL)

    2017-12-18

    Dec 18, 2017 ... Synthesis and Characterization of a Schiff Base Cobalt (III) Complex and ... zinc, palladium, magnesium and gold and most ..... Synthesis, spectral characterization, solution equilibria, in vitro antibacterial and cytotoxic activities of Cu(II), Ni(II), Mn(II), Co(II) and Zn(II) complexes with Schiff base derived from 5 ...

  20. Synthesis and characterization of zeolite L

    International Nuclear Information System (INIS)

    Ko, Yong Sig; Ahn, Wha Seung

    1999-01-01

    Substantial reduction in synthesis time was achieved for zeolite L crystallization by attempting a hydrothermal synthesis at elevated temperature of 443K in a Na + /K+ mixed alkali system. Pure zeolite L could be obtained from a gel with the molar composition 5.4K 2 O-5.7Na 2 O-Al 2 O 3 -30SiO 2 -500H 2 O after 24h. Zeolite L could be obtained in high purity at the optimum Na 2 O/(K 2 O+Na 2 O) ratio of around 0.5, while zeolite W was formed when the Na 2 O/(K 2 O+Na 2 O) ratio was more than 0.66. The crystalline zeolite L samples obtained were characterized by means of elemental chemical analysis, XRD, SEM, FTi.r. spectroscopy, and particle size analyzer. In addition, two probe reaction studies were conducted. In toluene alkylation, H-L catalyst showed high catalytic activity at the beginning, but was deactivated quickly probably due to one-dimensional pore structure being blocked by the coke formed. High amounts of trimethylbenzene or diethylbenzene were observed due to the large 12-membered ring pore structure of zeolite L. Pt/NaKL catalyst prepared showed a high conversion of n-hexane and high selectivity to benzene in n-hexane aromatization reaction

  1. Synthesis and characterization of innovative insulation materials

    Directory of Open Access Journals (Sweden)

    Skaropoulou Aggeliki

    2018-01-01

    Full Text Available Insulation elements are distinguished in inorganic fibrous and organic foamed materials. Foamed insulation materials are of great acceptance and use, but their major disadvantage is their flammability. In case of fire, they tend to transmit the flame producing toxic gases. In this paper, the synthesis and characterization of innovative inorganic insulation materials with properties competitive to commercial is presented. Their synthesis involves the mixing of inorganic raw material and water with reinforcing agent or/and foaming agent leading to the formation of a gel. Depending on raw materials nature, the insulation material is produced by freeze drying or ambient drying techniques of the gel. The raw material used are chemically benign and abundantly available materials, or industrial by-products and the final products are non-toxic and, in some cases, non-flammable. Their density and thermal conductivity was measured and found 0.02-0.06 g/cm3 and 0.03-0.04 W/mK, respectively.

  2. Zeolite from fly ash: synthesis and characterization

    Indian Academy of Sciences (India)

    Coal fly ash was used to synthesize X-type zeolite by alkali fusion followed by hydrothermal treatment. The synthesized zeolite was characterized using various techniques such as X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, BET method for surface area measurement etc.

  3. Synthesis and characterization of a reduced heteropoly ...

    Indian Academy of Sciences (India)

    Compound (1) crystallizes in a cubic space group 3 ¯ , with = 22.2001(6) Å and = 8. The anion [VVO4W 10 VI V 2 IV O36]7- is a typical Keggin type structure with VVO4 as the central tetrahedron. (1) has further been characterized by elemental analyses, redox titration, IR, EPR, and electronic spectroscopy and room ...

  4. Synthesis, characterization, sintering and dielectric properties of ...

    Indian Academy of Sciences (India)

    Nanoparticles of barium gadolinium antimonate (Ba2GdSbO6), a complex perovskite-type oxide, has been synthesized using an auto ignition combustion process for the first time. The nanoparticles thus obtained have been characterized by powder X-ray diffraction, thermogravimetric analysis, differential thermal analysis, ...

  5. Green synthesis and characterization of graphene nanosheets

    Energy Technology Data Exchange (ETDEWEB)

    Tavakoli, Farnosh [School of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of); Salavati-Niasari, Masoud, E-mail: salavati@kashanu.ac.ir [Institute of Nano Science and Nano Technology, University of Kashan, Kashan, P. O. Box. 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Department of Inorganic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, P. O. Box. 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Badiei, Alireza [School of Chemistry, College of Science, University of Tehran, Tehran (Iran, Islamic Republic of); Mohandes, Fatemeh [Department of Inorganic Chemistry, Faculty of Chemistry, University of Kashan, Kashan, P. O. Box. 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of)

    2015-03-15

    Highlights: • For the first time, we have synthesized graphene nanosheets in the presence of pomegranate juice. • Here pomegranate juice was used not only as reductant but also as capping agent. • FT-IR, XRD, SEM, EDS and TEM were used to characterize the samples. • According to TEM image, graphene nanosheet is individually exfoliated after stirring for 24 h. • As shown in the TEM image, graphene monolayer is obtained. - Abstract: For the first time, we have successfully synthesized graphene nanosheets in the presence of pomegranate juice. In this approach, pomegranate juice was used not only as reductant but also as capping agent to form graphene nanosheets. At first, the improved Hummer method to oxidize graphite for the synthesis of graphene oxide (GO) was applied, and then the as-produced graphene oxide was reduced by pomegranate juice to form graphene nanosheets. Fourier transformed infrared (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), high resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM) and raman were used to characterize the samples. The results obtained from the characterization techniques proved high purity of the final products.

  6. Synthesis, Characterization and Reactions of (Azidoethynyltrimethylsilane

    Directory of Open Access Journals (Sweden)

    Klaus Banert

    2015-12-01

    Full Text Available Synthesis of azido(trimethylsilylacetylene (6 was performed by treating the iodonium salt 5 with highly soluble hexadecyltributylphosphonium azide (QN3 at −40 °C. Although this product is very unstable, it can nevertheless be trapped by the click reaction with cyclooctyne to give the corresponding 1,2,3-triazole, and also directly characterized by 1H- and 13C-NMR data as well as IR-spectra, which were measured in solution at low temperature and in the gas phase. The thermal or photochemical decay of azide 6 leads to cyano(trimethylsilylcarbene. This is demonstrated not only by quantum chemical calculations, but also by the trapping reactions with the help of isobutene.

  7. Synthesis and characterization of boron nitrides nanotubes

    International Nuclear Information System (INIS)

    Ferreira, T.H.; Sousa, E.M.B.

    2010-01-01

    This paper presents a new synthesis for the production of boron nitride nanotubes (BNNT) from boron powder, ammonium nitrate and hematite tube furnace CVD method. The samples were subjected to some characterization techniques as infrared spectroscopy, thermal analysis, X-ray diffraction and scanning electron microscopy and transmission. By analyzing the results can explain the chemical reactions involved in the process and confirm the formation of BNNT with several layers and about 30 nanometers in diameter. Due to excellent mechanical properties and its chemical and thermal stability this material is promising for various applications. However, BNNT has received much less attention than carbon nanotubes, it is because of great difficulty to synthesize appreciable quantities from the techniques currently known, and this is one of the main reasons this work.(author)

  8. Synthesis and characterization of a cerebral radiotracer

    International Nuclear Information System (INIS)

    Ben hamouda, Salem

    2010-01-01

    The development of nuclear medicine is based on research of new radiopharmaceuticals, in particular, relying on technetium-99m, the most used radioisotope in terms of availability and low cost. A similar study on Rhenium (185/187Re) is essential for monitoring physico-chemical studies due to the high specific activity of technetium-99m. During this work, we have synthesized and labeled with technetium the N-methyl-4-hydroxy piperidinyl ferrocenyl carboxylate. The marking is done by exchange of ligands between the iron group of ferrocene and tricabonyl technetium core. We have succeeded to synthesis the N-methyl-4-hydroxy piperidinyl carboxyl cyclopentadienyl tricarbonyl rhenium (the molecular analogue of the technetium). We characterized it by MS, IR and NMR (1H, 13C) The structure of N-methyl-4-hydroxy piperidinyl carboxyl cyclopentadienyl tricarbonyl technetium is well justified.

  9. Synthesis and characterization of energetic thermoplastic elastomers for propellant formulations

    Directory of Open Access Journals (Sweden)

    Aparecida M. Kawamoto

    2009-01-01

    Full Text Available Synthesis and characterization of energetic ABA-type thermoplastic elastomers for propellant formulations has been carried out. Following the working plan elaborated, the synthesis and characterization of Poly 3- bromomethyl-3-methyl oxetane (PolyBrMMO, Poly 3- azidomethyl-3-methyl oxetane (PolyAMMO, Poly 3,3-bis-azidomethyl oxetane (PolyBAMO and Copolymer PolyBAMO/AMMO (by TDI end capping has been successfully performed. The thermoplastic elastomers (TPEs were synthesized using the chain elongation process PolyAMMO, GAP and PolyBAMO by diisocyanates. In this method 2.4-toluene diisocyanate (TDI is used to link block A (hard and mono- functional to B (soft and di-functional. For the hard A-block we used PolyBAMO and for the soft B-block we used PolyAMMO or GAP.This is a joint project set up, some years ago, between the Chemistry Division of the Institute of Aeronautics and Space (IAE - subordinated to the Brazilian Ministry of Defense - and the Fraunhofer Institut Chemische Technologie (ICT, in Germany. The products were characterized by different techniques as IR- and (1H,13CNMR spectroscopies, elemental and thermal analyses. New methodologies based on FT-IR analysis have been developed as an alternative for the determination of the molecular weight and CHNO content of the energetic polymers.

  10. Synthesis, characterization and anti-proliferative activity of Cd(II) complexes with NNN type pyrazole-based ligand and pseudohalide ligands as coligand

    Science.gov (United States)

    Hopa, Cigdem; Yildirim, Hatice; Kara, Hulya; Kurtaran, Raif; Alkan, Mahir

    2014-03-01

    Cd(II) complexes of tridentate nitrogen donor ligand, 2,6-bis(3,4,5-trimethylpyrazolyl)pyridine (btmpp), Cd(btmpp)X2 (X:Cl, ONO or N(CN)2) have been synthesized and characterized by elemental and spectral (FT-IR, 1H NMR, 13C NMR, UV-Vis) analyses, differential thermal analysis and single crystal X-ray diffraction studies. The molecular structure of reported complex 1, revealed distorted square-pyramidal geometry around Cadmium. Complexes 1-3 and corresponding ligand were tested for cytotoxic activity against the human carcinoma cell lines HEP3B (hepatocellular carcinoma), PC3 (prostate adenocarcinoma), MCF7 (breast adenocarcinoma) and Saos2 (osteosarcoma). The results show that, complexes are more cytotoxic than the free ligand and complex 2 is the most cytotoxic complex for PC3.

  11. Synthesis and characterization of fluorine compounds

    International Nuclear Information System (INIS)

    Martinez Carrillo, M.

    1991-01-01

    The ( 18 F) D-glucose, 2-deoxy fluorine ( 18 FDG) is a radio pharmaceutic that is used in nuclear medicine it is utilized mainly in the glucose metabolism. It allows recently to observe the tumors accumulation and growing. The obtention of this radio pharmaceutic can realize by a nucleophilic or electrophilic process through the use of different fluorinated agents obtained as intermediates for introducing the 18 F radionuclide in a final step of synthesis. The first methods already has been studied in the National Institute of Nuclear Research. The second one which is based this work and it was realized through the reaction of acetyl hypo fluorite (CH 3 COOF) with tri acetyl glucal (TAG) in turn they require the obtention of several fluorated compounds that they serve as intermediates for their obtention so that objective of this work was to find the adequate technique for the obtention of anhydride hydrofluoric acid (HF), KF.2 HF and elemental fluorine so as the design and construction of the systems and equipment used for carry out each one of the reactions. Moreover it was designed the system that will be used for the obtention of acetyl hypo fluoride and the synthesis of composite tetraacetilide 3,4,6 tri-D-glucopyranosil fluoride (TAG-F) for that finally by hydrolysis it was obtained the 2-deoxy fluoride-D-glucose (TAG) in inactive. In this system were realized several preliminary tests. The results are showed in the content of this work also the techniques for compounds characterization were given. (Author)

  12. Synthesis and Characterization of Nano Scale YBCO

    International Nuclear Information System (INIS)

    Sukirman, E.; Wisnu AA; Yustinus P; Sahidin W, D.; Rina M, Th.

    2009-01-01

    Synthesis and characterization of the nano scale YBCO superconductor have been performed. The nano scale superconductor was synthesized from YBCO system (YBa 2 Cu 3 O 7-X ). Raw materials, namely Y 2 O 3 , BaCO 3 , and Cu°, were balanced and mixed with ethanol using magnetic steering as a churn in a beaker glass. Then, the precursor was calcined at T k = 900°C for 5 hours and repeated it until three times. The resulting precursor was ground by using High Energy Milling (HEM) for t = 0, 30, 50, 70, and 90 hour and hereinafter precursors are successively referred as YKM-00, YKM-30, YKM-50, YKM-70, and YKM-90. The resulting powders phase were characterized by means of x-ray diffraction technique using the Rietveld analysis method. Precursor of YKM-90 was pressed into pellets, and then sintered at various temperatures and periods. The sample phase was then characterized by using the Rietveld analysis method based on the x-ray diffraction data. The crystallites size were calculated using Scherrer formula. Results of analysis indicate that by minimizing crystallites size, period of sinter can be shortened from 10 to 1 hour, resulting crystallite size of D = 925 Å, critical current density of J c = 4 A / cm 2 , and can be grown of about 15 weight % of 211-phase in a matrix of 123-phase. The decrease of crystallite size will generate a change in physical properties dramatically, if the crystallite size of the material, D is smaller or equal to the coherence length of 10 Å. (author)

  13. Synthesis and characterization of an A2BC type phthalocyanine and its visible-light-responsive photocatalytic H2 production performance on graphitic carbon nitride.

    Science.gov (United States)

    Guo, Yingying; Song, Shuaishuai; Zheng, Ya; Li, Renjie; Peng, Tianyou

    2016-09-28

    A highly asymmetric A2BC type zinc phthalocyanine (Zn-di-PcNcTh) has been designed and synthesized. The Zn-di-PcNcTh used a π electron rich thiophene ring in place of the benzenoid rings of phthalocyanine which acted as an electron donor, diphenylphenoxy substituents to retard aggregation and a carboxyl-naphthalene unit as an electron acceptor. The asymmetric phthalocyanine shows a strongly split Q-band and wide spectral absorption in the visible/near-IR light region, which can extend the spectral response region of graphitic carbon nitride (g-C3N4) from ∼450 nm to more than 800 nm. By using it as a sensitizer of 1.0 wt% Pt-loaded graphitic carbon nitride (g-C3N4), the experimental results indicate that Zn-di-PcNcTh-Pt/g-C3N4 shows a H2 production efficiency of 249 μmol h(-1) with an impressive turnover number (TON) of 9960.8 h(-1) under visible light (λ≥ 420 nm) irradiation, much higher than that of pristine Pt/g-C3N4. Owing to the introduction of a highly bathochromic shift of 3,4-dicyanothiophene and the valuable "push-pull" effect from the thiophene (electron donor) to the carboxyl-naphthalene (electron acceptor) unit, Zn-di-PcNcTh/g-C3N4 gives an extremely high apparent quantum yield (AQY) of 2.44%, 3.05%, and 1.53% under 700, 730, and 800 nm monochromatic light irradiation, respectively, under optimized photocatalytic conditions.

  14. Polypyrrole-silver Nanocomposite: Synthesis and Characterization

    Directory of Open Access Journals (Sweden)

    D. M. Nerkar

    2016-07-01

    Full Text Available Polypyrrole-Silver (PPy-Ag nanocomposite has been successfully synthesized by the chemical oxidative polymerization of pyrrole with iron (III chloride as an oxidant, in the presence of a colloidal suspension of silver nanoparticles. Turkevich method (Citrate reduction method was used for the synthesis of silver nanoparticles (Ag NPs. The silver nanoparticles were characterized by UV-Visible spectroscopy which showed an absorption band at 423 nm confirming the formation of nanoparticles. PPy-Ag nanocomposite was characterized by Transmission Electron Microscopy (TEM, Scanning Electron Microscopy (SEM, Fourier Transform Infrared Spectroscopy (FTIR and X-ray diffraction (XRD techniques for morphological and structural confirmations. TEM and SEM images revealed that the silver nanoparticles were well dispersed in the PPy matrix. XRD pattern showed that PPy is amorphous but the presence of the peaks at 2q values of 38.24°, 44.57°, 64.51° and 78.45° corresponding to a cubic phase of silver, revealed the incorporation of silver nanoparticles in the PPy matrix. A possible formation mechanism of PPy-Ag nanocomposite was also proposed. The electrical conductivity of PPy-Ag nanocomposite was studied using two probe method. The electrical conductivity of the PPy-Ag nanocomposite prepared was found to be 4.657´10- 2 S/cm, whereas that of pure PPy was found to be 9.85´10-3 S/cm at room temperature (303 K. The value of activation energy (Ea for pure PPy was 0.045 eV while it decreased to 0.034 eV for PPy-Ag nanocomposite. The synthesized nanocomposite powder can be utilized as a potential material for fabrication of gas sensors operating at room temperature.

  15. Synthesis and characterization of functional magnetic nanocomposites

    Science.gov (United States)

    Gass, J.; Sanders, J.; Srinath, S.; Srikanth, H.

    2006-03-01

    Magnetic nanoparticles and carbon nanotubes have been excellent functional materials that could be dispersed in polymer matrices for various applications. However, uniform dispersion of particles in polymers without agglomeration is quite challenging. We have fabricated PMMA/polypyrrole bilayer structures embedded with Fe3O4 magnetite nanoparticles synthesized using wet chemical synthesis. Agglomeration-free dispersion of nanoparticles was achieved by coating the particles with surfactants and by dissolving both the particles and PMMA in chlorobenzene. Structural characterization was done using XRD and TEM. Magnetic properties of the bilayer structures indicated superparamagnetic behavior that is desirable for RF applications as the magnetic losses are reduced. Our polymer nanocomposite bilayer films with conducting polymer coatings are potential candidates for tunable RF applications with integrated EMI suppression. We will also report on our studies of pumped ferrofluids flowing past carbon nanotubes that are arranged in microchannel arrays. Magnetization under various flow conditions is investigated and correlated with the hydrodynamic properties. This scheme provides a novel method of energy conversion and storage using nanocomposite materials.

  16. Synthesis and characterization of cuprate superconductors

    International Nuclear Information System (INIS)

    Schaeffer, R.W. III.

    1992-01-01

    Superconducting powders and films were synthesized by a variety of methods and solvent systems: chemical solidification, freeze drying, and spray pyrolysis from livid ammonia (to form powders and films); reactions in molten sodium hydroxide/sodium peroxide and sodium nitrate/potassium nitrate mixtures (to form powders); and gel formation, coprecipitation, and spray drying from aqueous/organic mixtures (to form powders and films). These materials were characterized for elemental content and phase purity by gravimetric and volumetric analysis, atomic absorption spectroscopy, x-ray fluorescence and x-ray diffraction techniques. Particle size and surface morphology were determined by scanning electron microscopy and x-ray diffraction analysis. Also, precursor reactions were followed as a function of temperature with thermal gravimetric analysis and differential scanning calorimetry. Finally, physical properties determined for the resulting superconducting phases included resistivity, magnetic susceptibility, critical current, and percent Meissner effect. These results are discussed as a function of process parameters with particular attention to the role of atomic level mixing in solid state synthesis

  17. Synthesis and Characterization of 2-D Materials

    Science.gov (United States)

    Pazos, S.; Sahoo, P.; Afaneh, T.; Rodriguez Gutierrez, H.

    Atomically thin transition-metal dichacogenides (TMD), graphene, and boron nitride (BN) are two-dimensional materials where the charge carriers (electrons and holes) are confined to move in a plane. They exhibit distinctive optoelectronic properties compared to their bulk layered counterparts. When combined into heterostructures, these materials open more possibilities in terms of new properties and device functionality. In this work, WSe2 and graphene were grown using Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) techniques. The quality and morphology of each material was checked using Raman, Photoluminescence Spectroscopy, and Scanning Electron Microscopy. Graphene had been successfully grown homogenously, characterized, and transferred from copper to silicon dioxide substrates; these films will be used in future studies to build 2-D devices. Different morphologies of WSe2 2-D islands were successfully grown on SiO2 substrates. Depending on the synthesis conditions, the material on each sample had single layer, double layer, and multi-layer areas. A variety of 2-D morphologies were also observed in the 2-D islands. This project is supported by the NSF REU Grant #1560090 and NSF Grant #DMR-1557434.

  18. Synthesis and characterization of novel nanothermometers

    Energy Technology Data Exchange (ETDEWEB)

    Baumert, Delphine [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Larsen, George [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coopersmith, Kaitlin [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Schyck, Sarah [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-23

    A straightforward approach was developed for the synthesis of Pd, Pd-Fe2O3, Au-Fe2O3, and Au-Pd-Fe2O3 nanothermometers, using a single SL DNA. These NP-DNA conjugates were characterized using techniques including EDX measurements, ζ-potential of NPs before and after DNA functionalization, electron microscopy studies and fluorescence spectroscopy. The fluorescence studies of the NP-DNA demonstrate the interaction between the NP and the fluorophore, which is quenched in the case of Au-Pd-Fe2O3 NPs and is perhaps enhanced (when compared to AuNPs) in the case of Pd and Pd-Fe2O3 NPs. In order to achieve more accurate and reproducible measurements, designing a system that is able to hold the NP-DNA conjugates at a temperature for a longer period of time to allow them to 12 equilibrate is currently underway. Our studies show that Au-Pd-Fe2O3 NPs are the best candidate material to serve as nanothermometers when compared to Pd, Pd-Fe2O3, and Au-Fe2O3 materials.

  19. SYNTHESIS AND CHARACTERIZATION OF IRON (II) AND NICKEL ...

    African Journals Online (AJOL)

    DR. AMINU

    SYNTHESIS AND CHARACTERIZATION OF IRON (II) AND NICKEL (II). SCHIFF BASE COMPLEXES. * Aliyu, H. N. and A. S. ... synthesis and magnetic studies on schiff base complexes of copper (II). Recently, Xishi et al. (2003) .... pyridylmethanimines as Tuneable Alternatives to Bipyridine Ligan in Copper Medicated Atom.

  20. Synthesis and characterization of six-membered pincer ...

    Indian Academy of Sciences (India)

    0013167

    SUPPORTING INFORMATION. REGULAR ARTICLE. Synthesis and characterization of six-membered pincer nickelacycles and application in alkylation of benzothiazole. †. HANUMANPRASAD PANDIRI,a DIPESH M SHARMA,a RAJESH G GONNADEb and. BENUDHAR PUNJI*,a. aOrganometallic Synthesis and Catalysis ...

  1. Synthesis and characterization of five-coordinated indium amidinates

    Energy Technology Data Exchange (ETDEWEB)

    Riahi, Yasaman

    2016-07-29

    The focus of this work is synthesis, characterization and exploring the reactivity of new indium amidinate compounds of the type R{sub 2}InX (R = R''NCR'NR''; R' = Ph, R'' = SiMe{sub 3}, iPr, dipp; X = Br, Cl) with the coordination number of five and R{sub 3}In (R = Me{sub 3}SiNCPhNSiMe{sub 3}) with the coordination number of six. By using amidinates as chelating ligands the electron deficiency of indium atom will be resolved. Additionally, by using different substituents the study of the different synthesized indium amidinates has become possible. The selected method for the synthesis allows the carbodiimides to react with organolithium compounds to get the corresponding lithium amidinates. Afterwards the resulting lithium amidinates take part in transmetalation reactions with InBr{sub 3} and InCl{sub 3}. The study of the reactivity of indium amidinate complexes including nucleophilic reactions as well as their reduction were also examined. Beside crystal structure analysis, nuclear magnetic resonance spectroscopy as well as elemental analysis has been applied to characterize the compounds.

  2. Synthesis and Characterization of MAX Ceramics (MAXCERs)

    Science.gov (United States)

    Nelson, Johnny Carl

    This research has focused on the design and development of novel multifunctional MAX reinforced ceramics (MAXCERs). These MAXCERs were manufactured with 1-50 vol% ratios of ceramics to MAX phases. Chapter II reports on the synthesis and tribological behavior of Ti3SiC2 matrix composites by incorporating (1 and 6 vol%) Al2O3, (1 and 5 vol%) BN, and (1 and 5 vol%) B4C ceramic particulate additives in the matrix. All the composites were fabricated by pressureless sintering by using 1 wt% Ni as a sintering agent at 1550 °C for 2 hours. SEM and XRD studies showed that Al2O3 is relatively inert in the Ti3SiC 2 matrix whereas BN and B4C reacted significantly with the Ti3 SiC2 matrix to form TiB2. Detailed tribological studies showed that Ti3SiC2-1wt%Ni (baseline) samples showed dual type tribological behavior where the friction coefficient (micro) was low ( 0.2) during stage 1, thereafter micro increased sharply and transitioned into stage 2 ( 0.8). The addition of Al2O3 as an additive had little effect on the tribological behavior, but the addition of B4C and BN was able to enhance the tribological behavior by increasing the transition distance (TD). Chapter III reports on the synthesis and tribological behavior of TiB2 matrix composites by incorporating (10, 30, and 50 vol%) Ti3SiC2 ceramic particulate additives in the matrix. The fabrication parameters were similar to the Ti3SiC2 samples from Chapter II. There was minimal reaction between the TiB2 and the Ti3SiC2. Detailed tribological studies showed that TiB2 (baseline) and TiB2-10%Ti 3SiC2 samples showed an average micro of 0.29 and 0.28, respectively. TiB2-30%Ti3SiC2 and TiB 2-50%Ti3SiC2 showed dual-type tribological behavior where micro was low ( 0.25) during stage 1, thereafter micro increased gradually and transitioned into stage 2 ( 0.6). Low wear rates were seen for all samples.

  3. Synthesis and characterization of amorphous cellulose from triacetate of cellulose

    International Nuclear Information System (INIS)

    Vega-Baudrit, Jose; Sibaja, Maria; Nikolaeva, Svetlana; Rivera A, Andrea

    2014-01-01

    It was carried-out a study for the synthesis and characterization of amorphous cellulose starting from cellulose triacetate. X-rays diffraction was used in order to obtain the cellulose crystallinity degree, also infrared spectroscopy FTIR was used. (author)

  4. Synthesis, spectroscopic and DFT characterization of 4 β -(4- tert ...

    African Journals Online (AJOL)

    Synthesis, spectroscopic and DFT characterization of 4 β -(4-tert-butylphenoxy) phthalocyanine positional isomers for non-linear optical absorption. Denisha Gounden, Grace N. Ngubeni, Marcel S. Louzada, Samson Khene, Jonathan Britton, Nolwazi Nombona ...

  5. Gold (I)-selenolate complexes: Synthesis, characterization and ...

    Indian Academy of Sciences (India)

    selenolate complexes: Synthesis, characterization and ligand exchange reactions. Krishna P Bhabak ... This study indicates that the nature of selenolate plays an important role in ligand exchange reactions in gold(I) selenolates. Furthermore, the ...

  6. Synthesis, characterization and emission properties of quinolin-8 ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 116; Issue 5. Synthesis, characterization and emission properties of quinolin-8-olato chelated ruthenium organometallics. Bikash Kumar Panda. Volume 116 ... Keywords. Ruthenium organometallics; quinolin-8-olato chelation; emission properties; trivalent ruthenium.

  7. Synthesis and characterization of ceria nanomaterials

    Science.gov (United States)

    Cheong Ng, Nitzia

    Cerium dioxide or ceria, CeO2, has been widely used in industry as catalyst for automotive exhaust controls, chemical mechanical polishing (CMP) slurries, and high temperature fuel cells because of its unique metal oxide properties. This well-known rare metal oxide has high thermal stability, electrical conductivity and chemical diffusivity. Proper synthesis method requires knowledge of reaction temperature, concentration, and time effects on the synthesis. In this work, ceria nanomaterials were prepared via the hydrothermal method using a Teflon autoclave. Cerium nitrate solution was used as the source and three different precursors: NaOH, H2O 2, and NH4OH were used as the oxidizing agents. CeO 2 nanoplates, nanocubes and nanorods were produced and studied using transmission electron microscopy (TEM), BET specific surface area, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Through characterization, CeO2 nanomaterials showed the presence of mixed valence states (Ce3+ and Ce4+) through XPS spectra. Deconvolution was performed to investigate the ratio of Ce 3+/Ce4+ concentration in the synthesized CeO2 nanostructures. Nanocubes showed a higher Ce3+ concentration. CeO2 nanomaterials were found to be mesoporous. Nanoplates synthesized with H2O2, and NH4OH were found with surface areas of 95.11 m2/g and 62.07 m2/g, respectively. Nanorods and nanocubes showed surface areas of 16.77 m2/g and 16.55 m2/g, respectively. The prepared ceria nanoplates, nanocubes and nanorods had crystallite size in the range of 5--25 nm and pore size range of 7--15 nm. XRD spectra confirmed that the peaks were indexed to the cubic phase of CeO2 with fluorite structure and with an average lattice parameter, 5.407 A. Higher Ce3+ concentration and exposed surface of crystalline planes suggest that nanorods are better catalyst for CO oxidation and oxygen storage capacity (OSC).

  8. Synthesis, characterization and luminescence properties of zinc oxide nanostructures

    Science.gov (United States)

    Khan, Aurangzeb

    Zinc oxide (ZnO) represents an important semiconductor material due to its wideband gap (3.37 eV at room temperature), large exciton binding energy (60 meV), high optical gain, and luminescence as well as piezoelectric properties [1]. From the 1960s, ZnO thin films have been extensively studied because of their applications as sensors, transducers and catalysts [2]. Since a few decades, one-dimensional nanostructures have become the focus point in nanoscience and nanotechnology. Nanostructures are considered to have unique physical, chemical, catalytic and optical properties that are profoundly different from their bulk counterparts. Since the discovery of carbon nanotubes (CNTs) in 1991, a string of research activities led to the growth and characterization of nanostructures of various materials including semiconductors such as Si, Ge and also compound semiconductors such as InP, GaAs, GaN and ZnO. ZnO is a versatile material and has shown potential for the synthesis of various types of nanostructures such as nanocombs, nanorings, nanohelices/nanosprings, nanobelts, nanowires and nanocages under specific growth conditions and probably has the richest family of nanostructures among all materials, both in structure and properties. This dissertation presents the synthesis, characterization and luminescence properties of ZnO nanostructures with the development of a PVD system. The nanostructures of ZnO are synthesized on various kinds of substrates such as Silicon, Sapphire and Alumina. We have synthesized a large family of nanostructures such as nanowires, nanorods, nanobelts, aligned nanorods, nanosheets, nanospheres, nanocombs, microspheres, hexagons etc. The nanostructures are then characterized by SEM, EDX, TEM, HRTEM, XRD, Raman Spectroscopy, PL and CL. From the characterization of the materials, we observed that these nanostructures are of good crystalline quality. PL and CL spectra reveal that all the nanostructures emit a ˜380 nm (UV) usually called the near

  9. Novel Green Synthesis and Characterization of Nanopolymer ...

    African Journals Online (AJOL)

    Purpose: To develop a novel approach to green synthesis of nano-polymer porous gold oxide nanoparticles, and examine the effects of the temperatures on their surface. Methods: Green synthesis of nano-polymer porous gold oxide nanoparticles (GONPs) using cetyle trimethylammonium bromide (CTAB) surfactant with a ...

  10. Synthesis, spectroscopic characterization and electronic structure of ...

    Indian Academy of Sciences (India)

    Unknown

    Copper(I) carbene complex; carbene complex synthesis; Cu(I)–carbene electronic structure. 1. Introduction. Metal carbene complexes are arguably the most ver- satile organometallic reagents that have been devel- oped for organic synthesis.1 Different reactions of these complexes have been reported since their dis-.

  11. Synthesis of amidoalkyl naphthol via Ritter-type reaction catalysed ...

    Indian Academy of Sciences (India)

    Multi-component reactions (MCRs) play an important role in organic synthesis since they generally occur in a single pot and exhibit a high atom-economy and selectivity. Ritter-type reaction is an important MCR in organic synthesis for C–N bond forming to afford. N-alkyl amide compounds, which are ubiquitous to a variety ...

  12. Boron carbide nanowires: Synthesis and characterization

    Science.gov (United States)

    Guan, Zhe

    Bulk boron carbide has been widely used in ballistic armored vest and the property characterization has been heavily focused on mechanical properties. Even though boron carbides have also been projected as a promising class of high temperature thermoelectric materials for energy harvesting, the research has been limited in this field. Since the thermal conductivity of bulk boron carbide is still relatively high, there is a great opportunity to take advantage of the nano effect to further reduce it for better thermoelectric performance. This dissertation work aims to explore whether improved thermoelectric performance can be found in boron carbide nanowires compared with their bulk counterparts. This dissertation work consists of four main parts. (1) Synthesis of boron carbide nanowires. Boron carbide nanowires were synthesized by co-pyrolysis of diborane and methane at low temperatures (with 879 °C as the lowest) in a home-built low pressure chemical vapor deposition (LPCVD) system. The CVD-based method is energy efficient and cost effective. The as-synthesized nanowires were characterized by electron microscopy extensively. The transmission electron microscopy (TEM) results show the nanowires are single crystalline with planar defects. Depending on the geometrical relationship between the preferred growth direction of the nanowire and the orientation of the defects, the as-synthesized nanowires could be further divided into two categories: transverse fault (TF) nanowires grow normal to the defect plane, while axial fault (AF) ones grow within the defect plane. (2) Understanding the growth mechanism of as-synthesized boron carbide nanowires. The growth mechanism can be generally considered as the famous vapor-liquid-solid (VLS) mechanism. TF and AF nanowires were found to be guided by Ni-B catalysts of two phases. A TF nanowire is lead by a hexagonal phase catalyst, which was proved to be in a liquid state during reaction. While an AF nanowires is catalyzed by a

  13. Synthesis, characterization and ion exchange properties of ...

    Indian Academy of Sciences (India)

    –1 dry exchanger, respectively. The material ... been found to have better properties than the simple salts of metals. The selectivity may be enhanced ... capacity and higher stability at elevated temperature. This paper deals with the synthesis, ...

  14. Synthesis, Characterization and Antimicrobial Activity of Copper(II ...

    African Journals Online (AJOL)

    This study presents the synthesis, characterization and antimicrobial activity of copper(II) complexes of some ortho-substituted aniline Schiff bases (L1–L8). The Schiff bases and their respective copper(II) complexes were characterized by a combination of elemental analysis, infrared and UV/Visible studies. The structures of ...

  15. Synthesis and characterization of poly(2,5-dimethoxyaniline) and ...

    Indian Academy of Sciences (India)

    Unknown

    Mater. Sci., Vol. 24, No. 4, August 2001, pp. 389–396. © Indian Academy of Sciences. 389. Synthesis and characterization of poly(2,5-dimethoxyaniline) and poly(aniline-Co-2 ... remarkably improved solubility in common organic solvents, were obtained by chemical polymerization, and characterized by a host of physical ...

  16. Synthesis of mixed-linked xylans for enzyme characterization

    DEFF Research Database (Denmark)

    Boos, Irene; Clausen, Mads Hartvig

    of arabinoxylans. This can be achieved by chemical synthesis of well-defined oligosaccharides as models for the more complex macromolecules. Moreover, the utilization of enzyme resistant substrates can support the mapping of the active site of glycosyl-hydrolases. The talk will highlight the synthesis of mixed O......- and S-linked tetraxylans as possible interesting candidates for the investigation and characterization of arabinoxylan degrading enzymes....

  17. Studies on bismuth carboxylates—synthesis and characterization of ...

    Indian Academy of Sciences (India)

    synthesis and characterization of a new structural form of bismuth(III) dipicolinate ... Synthesis and X-ray structure of a new bismuth dipicolinate cooordination polymer, {[Bi((2,6-O2C)2C5H3N)((2-HO2C-6-O2C)C5H3N)(H2O)]2.5H2O} (7) are ...

  18. Synthesis and characterization of nanophased silver tungstate

    Indian Academy of Sciences (India)

    of silver tungstate nanoparticles. 2. Experimental. Silver tungstate nanoparticles were synthesized by reacting AR grade silver nitrate. (AgNO3) and sodium tungstate (Na2WO4) using distilled water as solvent at room temperature. The method followed for this synthesis is similar to that used by. Takahashi et al [9]. However ...

  19. Synthesis and Characterization of Colloidal MCM-41

    Czech Academy of Sciences Publication Activity Database

    Rathouský, Jiří; Zukalová, Markéta; Kooyman, P. J.; Zukal, Arnošt

    2004-01-01

    Roč. 241, - (2004), s. 81-86 ISSN 0927-7757 Institutional research plan: CEZ:AV0Z4040901 Keywords : colloidal MCM-41 * homogeneous precipitation * salt effect in the synthesis Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.513, year: 2004

  20. Colloidal phytosterols: synthesis, characterization and bioaccessibility

    NARCIS (Netherlands)

    Rossi, L.; Seijen ten Hoorn, J.W.M.; Melnikov, S.M.; Velikov, K.P.

    2010-01-01

    We demonstrate the synthesis of phytosterol colloidal particles using a simple food grade method based on antisolvent precipitation in the presence of a non-ionic surfactant. The resulting colloidal particles have a rod-like shape with some degree of crystallinity. The colloidal dispersions display

  1. Synthesis and Characterization of Nanostructured Sulfated Zirconias

    Czech Academy of Sciences Publication Activity Database

    Lutecki, M.; Šolcová, Olga; Werner, S.; Breitkopf, C.

    2010-01-01

    Roč. 53, č. 1 (2010), s. 13-20 ISSN 0928-0707 Grant - others:DFG(DE) BR2068/2-1; DFG(DE) BR2068/2-2 Institutional research plan: CEZ:AV0Z40720504 Keywords : sulfated zirconia * template assisted synthesis * porous materials Subject RIV: CA - Inorganic Chemistry Impact factor: 1.525, year: 2010

  2. Ionothermal synthesis and structural characterization of [Cu ...

    Indian Academy of Sciences (India)

    bSchool of Chemistry and Chemical Engineering, Harbin Normal University, No. 1 Shida Road Limin development Zone, Harbin 150025, P. R. China e-mail: caiqinghai@yahoo.com. MS received 29 December 2014; revised 2 April 2015; accepted 3 April 2015. Abstract. The ionothermal synthesis and spectroscopic, thermal ...

  3. Synthesis, spectral characterization and in vitro antibacterial ...

    African Journals Online (AJOL)

    Shafqat Nadeem

    2015-12-17

    Dec 17, 2015 ... Petra/Osiris/Molinspiration analysis. Abstract The paper emphasizes on the synthesis of Palladium(II) iodide complexes containing based ligands. The new compounds .... The spectral conditions were as follows: 32 K data points,. 1.822 s acquisition time, 2.00 s pulse delay and 6.00 ls pulse width. The 13C ...

  4. Synthesis, characterization and photochemistry of a new ...

    Indian Academy of Sciences (India)

    Abstract. The synthesis, crystal structure, redox characteristics and photochemistry of a new heptamolyb- date supported magnesium-aqua coordination complex viz. (hmtH)2[{Mg(H2O)5}2{Mo7O24}]·3H2O 1 (hmt. = hexamethylenetetramine) is reported. The cyclic voltammogram reveals quasireversible redox behaviour.

  5. Biological synthesis and characterization of intracellular gold ...

    Indian Academy of Sciences (India)

    ... nontoxic, safe, biocompatible and environmentally acceptable. In the present study, Aspergillus fumigatus was used for the intracellular synthesis of gold nanoparticles. Stable nanoparticles were produced when an aqueous solution of chloroauric acid (HAuCl4) was reduced by A. fumigatus biomass as the reducing agent ...

  6. Biological synthesis and characterization of silver nanoparticles ...

    Indian Academy of Sciences (India)

    eral plant extracts, particularly Lantana camara, Moringa oleifera, Catharanthus roseus, Eucalyptus hybrid, Cassia auriculata.23 However, potential of the plants as biologi- cal materials for the synthesis of nanoparticles is still under exploitation. In the present study, we developed an optimized method for syntheses of silver ...

  7. Synthesis, characterization and antimicrobial screening of hybrid ...

    Indian Academy of Sciences (India)

    sants.20 Comparative structure of drugs and reported bio-active quinoline derivatives shown in figure 1. As a result of remarkable pharmacological efficiency of quinoline, pyrimidine and morpholine derivatives, our studies have been focused towards the synthesis and bio-evaluation of these derivatives by hybrid approach.

  8. Synthesis, spectroscopic characterization and catalytic oxidation ...

    Indian Academy of Sciences (India)

    Oxidation of alcohols to carbonyl compounds is one of the most pivotal functional group transformations in organic synthesis. Three important natural enzymes ..... 6. Benzyl alcohol. Benzaldehyde. 57. 1-Phenylethanol. Acetophenone. 65. Cyclohexanol. Cyclohexanone. 49 a Reaction time, 5 h. b Yields based on substrate.

  9. Synthesis, stabilization, and characterization of metal nanoparticles

    Science.gov (United States)

    White, Gregory Von, II

    Wet chemical synthesis techniques offer the ability to control various nanoparticle characteristics including size, shape, dispersibility in both aqueous and organic solvents, and tailored surface chemistries appropriate for different applications. Large quantities of stabilizing ligands or surfactants are often required during synthesis to achieve these nanoparticle characteristics. Unfortunately, excess reaction byproducts, surfactants, and ligands remaining in solution after nanoparticle synthesis can impede application, and therefore post-synthesis purification must be employed. A liquid-liquid solvent/antisolvent pair (typically ethanol/toluene or ethanol/hexane for gold nanoparticles, GNPs) can be used to both purify and size-selectively fractionate hydrophobically modified nanoparticles. Alternatively, carbon dioxide may be used in place of a liquid antisolvent, a "green" approach, enabling both nanoparticle purification and size-selective fractionation while simultaneously eliminating mixed solvent waste and allowing solvent recycle. We have used small-angle neutron scattering (SANS) to investigate the ligand structure and composition response of alkanethiol modified gold and silver nanoparticles at varying anti-solvent conditions (CO2 or ethanol). The ligand lengths and ligand solvation for alkanethiol gold and silver NPs were found to decrease with increased antisolvent concentrations directly impacting their dispersibility in solution. Calculated Flory-Huggins interaction parameters support our SANS study for dodecanethiol dispersibility in the mixed organic solvents. This research has led to a greater understanding of the liquid-liquid precipitation process for metal nanoparticles, and provides critical results for future interaction energy modeling.

  10. Synthesis, Characterization and Application of Nano Lepidocrocite ...

    African Journals Online (AJOL)

    NICO

    were finely ground with a pestle in an agate mortar and were stored in an airtight bottle. 2.3. Synthesis of Magnetite (Fe3O4) Nanoparticles. Fe3O4 nanoparticles were synthesized in a similar fashion as mentioned for FeOOH except that the washing was done 3–4. RESEARCH ARTICLE. A. Agarwal, H. Joshi and A. Kumar,.

  11. Synthesis and characterization of silver molybdate nanowires ...

    Indian Academy of Sciences (India)

    Wintec

    approaches have been proved to provide an alternative route for the synthesis of 1-D nanomaterials (Buhro et al ... magnetic stirring to form a homogeneous greenish-yellow precipitate. The resulting precipitate was ... the size-dependent optical properties of the nanomaterials, due to the quantum confinements of the photo- ...

  12. Synthesis, spectroscopic characterization and catalytic oxidation ...

    Indian Academy of Sciences (India)

    tion in the development of catalysis, magnetism, molec- ular architectures and materials chemistry. Oxidation of alcohols to carbonyl compounds is one of the most pivotal functional group transformations in organic synthesis. Three important natural enzymes used for oxidation reactions are cytochrome P-450, per- oxidases ...

  13. Synthesis, Characterization and Antimicrobial Activities of Some ...

    African Journals Online (AJOL)

    user

    of metal ions with vitamin.111: Synthesis and infrared spectra of metal complexes with pyridoxamine and pyridoxine. Inorg. Chim. Acta, 46, 191-197. Gary, J and Adeyemo, A (1981) Interaction of vitamin B1 with Zn(II), Cd (II) and Hg(II) in. Deuterated Dimethyl Sulfoxide. Inorg. Chim. Acta, 55, 93-98. Gohzalez-vergara, E ...

  14. Synthesis and characterization of struvite nano particles

    Science.gov (United States)

    Rathod, K. R.; Jogiya, B. V.; Chauhan, C. K.; Joshi, M. J.

    2015-06-01

    Struvite, Ammonium Magnesium Phosphate Hexahydrate [(AMPH) - (NH4)MgPO4.6(H2O)], is one of the fascinating inorganic phosphate minerals. Struvite is one of the components of the urinary stones. Struvite occurs as crystallites in urine and grows as a type of kidney stone. In this study, struvite nano particles were synthesized by wet chemical technique. The aqueous solutions containing dissolved Mg(CH3COO)2.4H2O and (NH4)H2PO4 mixed at the Mg/P molar ratio of 1.00. The synthesized struvite nano particles were characterized by XRD, FT-IR, Thermal Analysis and TEM. From XRD, crystal structure of the nano particle was found to be orthorhombic and crystalline size was found to be within 11 to 26 nm. The FT-IR spectrum for the struvite nano particles confirmed the presence of a water molecule and metal-oxygen stretching vibration, O-H stretching and bending, N-H bending and stretching, P-O bending and stretching vibrations. The Thermal Analysis was carried out from room temperature to 900°C. From TEM analysis, particle size was 23 to 30 nm. All the results were compared with bulk struvite.

  15. Synthesis and characterization of luminescence magnetic nanocomposite

    International Nuclear Information System (INIS)

    Kiplagat, Ayabei; Onani, Martin O.; Meyer, Mervin; Akenga, Teresa A.; Dejene, Francis B.

    2016-01-01

    We report a new type of indium based quantum dots which were conjugated to the magnetic Fe 2 O 3 nanoparticles. They were characterized by photoluminescence (PL), high resolution transmission electron microscopy (HRTEM), superconducting quantum interference device (SQUID) and fourier transform infra-red (FTIR). The photoluminescence characteristics of the coupled and uncoupled indium based quantum dots were investigated to determine whether the fluorescing property could be retained in the bifunctional system. Generally, the PL intensity of the quantum dots was observed to reduce significantly and with huge red shift most probably due to quenching effects for the MNPs. The average size of the coupled nanoparticles were found to range between 4 and 5 nm for the quantum dots and range of 6–13 nm for the Fe 2 O 3 magnetic nanoparticles as revealed by both HRTEM and XRD. The highest magnetic saturation reached for both bare and functionalized magnetic nanoparticles was 68.58 emu/g. The FTIR data revealed that the postulated functional groups were actually present in both the bare and functionalized nanoparticles. For instance, Fe–O was observed at around 580 cm −1 , O–H at 3432 cm −1 and thiol group at 2929 cm −1 for meso-2,3-dimercaptosuccinic acid capped Fe 2 O 3 magnetic nanoparticles. The energy dispersive spectroscopy (EDS) also confirmed that all the elements of the nanocomposite were actually present in the designed material.

  16. Synthesis and characterization of hybrid nanostructures

    OpenAIRE

    Mokari, Taleb

    2011-01-01

    There has been significant interest in the development of multicomponent nanocrystals formed by the assembly of two or more different materials with control over size, shape, composition, and spatial orientation. In particular, the selective growth of metals on the tips of semiconductor nanorods and wires can act to couple the electrical and optical properties of semiconductors with the unique properties of various metals. Here, we outline our progress on the solution-phase synthesis of metal...

  17. Synthesis, characterization and applications of different nanostructures

    Science.gov (United States)

    Snyder, Whitney Elaine

    There has been a growing interest in the field of nanoscience for the last several decades including the use in optical, electrical, biological and medicinal applications. This thesis focuses on the synthesis of different nanoparticles for their potential uses in drug delivery and antimicrobial agents as well as porous alumina membranes as surface enhanced Raman scattering or SERS substrates. The synthesis of nanocomposites (NCs) composed of silica and poly(4-vinyl pyridine) (P4VP) in a basic ethanol solution is presented in chapter 2. The composition of the NCs appears to be homogenous after synthesis and is greatly affected by heat and pH changes. When the NCs are heated, a core-shell nanostructure is produced with silica forming a shell around a P4VP core. At lower pHs, the NCs form a silica core with a P4VP shell while at higher pHs the silica is etched away causing the NC to decompose. A novel synthesis method of growing stable copper oxide nanoparticles with poly(acrylic acid) (PAA) is presented in chapter 3. Insoluble copper (I) oxide is dissolved with ammonium hydroxide and reduced using sodium borohydride to form metallic copper nanoparticles that oxidize overtime to form copper oxide nanoparticles stable in an aqueous environment. In addition to copper oxide nanoparticles, copper (I) iodide and copper (II) sulfide particles were also synthesized in the presence of PAA. In chapter 4, alumina membranes with 100nm and 200nm pores were coated with silver and used as SERS substrates to detect small molecules. The alumina membranes are coated with silver by reducing silver (I) oxide with ethanol. The thickness of the silver layer depends primarily on the length of time the substrate comes into contact with the Ag2O in solution with longer exposure times producing thicker films. Raman scattering of 10-100nM adenine concentrations were collected.

  18. Synthesis and characterization of luminescence magnetic nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Kiplagat, Ayabei [DST/Mintek Nanotechnology Innovation Centre, Department of Chemistry, University of the Western Cape, Private Bag X17, Bellville (South Africa); Onani, Martin O., E-mail: monani@uwc.ac.za [DST/Mintek Nanotechnology Innovation Centre, Department of Chemistry, University of the Western Cape, Private Bag X17, Bellville (South Africa); Meyer, Mervin [DST/Mintek Nanotechnology Innovation Centre, Department of Biotechnology, University of the Western Cape, Private Bag X17, Bellville (South Africa); Akenga, Teresa A. [Department of Chemistry, University of Eldoret, P.O. Box 1125, Eldoret (Kenya); Dejene, Francis B. [Department of Physics, University of the Free State, QwaQwa Campus, Private Bag X13, Phuthadithaba 9866 (South Africa)

    2016-01-01

    We report a new type of indium based quantum dots which were conjugated to the magnetic Fe{sub 2}O{sub 3} nanoparticles. They were characterized by photoluminescence (PL), high resolution transmission electron microscopy (HRTEM), superconducting quantum interference device (SQUID) and fourier transform infra-red (FTIR). The photoluminescence characteristics of the coupled and uncoupled indium based quantum dots were investigated to determine whether the fluorescing property could be retained in the bifunctional system. Generally, the PL intensity of the quantum dots was observed to reduce significantly and with huge red shift most probably due to quenching effects for the MNPs. The average size of the coupled nanoparticles were found to range between 4 and 5 nm for the quantum dots and range of 6–13 nm for the Fe{sub 2}O{sub 3} magnetic nanoparticles as revealed by both HRTEM and XRD. The highest magnetic saturation reached for both bare and functionalized magnetic nanoparticles was 68.58 emu/g. The FTIR data revealed that the postulated functional groups were actually present in both the bare and functionalized nanoparticles. For instance, Fe–O was observed at around 580 cm{sup −1}, O–H at 3432 cm{sup −1} and thiol group at 2929 cm{sup −1} for meso-2,3-dimercaptosuccinic acid capped Fe{sub 2}O{sub 3} magnetic nanoparticles. The energy dispersive spectroscopy (EDS) also confirmed that all the elements of the nanocomposite were actually present in the designed material.

  19. Characterization of a beta 1----3-N-acetylglucosaminyltransferase associated with synthesis of type 1 and type 2 lacto-series tumor-associated antigens from the human colonic adenocarcinoma cell line SW403.

    Science.gov (United States)

    Holmes, E H

    1988-01-01

    Previous studies have indicated that activation of a normally unexpressed beta 1----3-N-acetylglucosaminyltransferase is responsible for the accumulation of a wide diversity of both type 1 and 2 lacto-series antigens in human colonic adenocarcinomas. A beta 1----3-N-acetylglucosaminyltransferase has been solubilized from the human colonic adenocarcinoma cell line SW403 by 0.2% Triton X-100 and some of its properties have been studied. The enzyme was active over a broad pH range from 5.8 to 7.5 and had a strict requirement for Mn2+ as a divalent metal ion. Transfer of N-acetylglucosamine (GlcNAc) to lactosylceramide was optimal when assayed in the presence of a final concentration of Triton CF-54 of 0.3%. Inclusion of CDPcholine in the reaction mixture stimulated the activity by protecting the UDP[14C]GlcNAc from hydrolysis by endogenous enzymes. The kinetic parameters of the enzyme were studied. Km values for acceptors nLc4 and nLc6 were determined to be 0.19 mM for each. However, the Vmax values calculated for these acceptors were 150 and 110 pmol/h/mg protein for nLc4 and nLc6, respectively, suggesting reduced potential for further elongation as the chain length increases. The Km for UDPGlcNAc was determined to be 0.17 mM. Studies of the acceptor specificity have indicated transfer of GlcNAc occurs mainly to type 2 chain nonfucosylated structures. However, elongation of the type 1 chain structure Lc4 was also detected.

  20. Synthesis and Characterization of Metal Phosphates for Photocatalytic Applications

    KAUST Repository

    Al-Sabban, Bedour

    2012-07-01

    Solar energy is the most abundant efficient and important source of renewable energy. The objective of this study is to develop highly efficient visible light responsive photocatalysts for overall water splitting. This is done by using silver or copper containing materials. Phosphate compounds have caught much attention due to their rigid structure, thermal stability and resistance to chemical attacks. Solid phosphates can be prepared by direct solid-state reaction between metal cations and phosphate anions at high temperatures. Double metal phosphates of the Nasion-type structure had shown further technological importance. It has been reported that well-crystallized double metal phosphate particles have excellent ordering and cationic conduction channels in the Nasicon framework. In this study, several Nasion-type structured materials have been synthesized by solid-state method (e.g. CuTi2(PO4)3 and AgTi2(PO4)3) heated up under different temperatures (400–1100C) in N2 or air atmosphere. These materials were characterized by XRD, SEM, DR-UV-Vis spectroscopy and tested for photocatalytic applications. A new method for direct synthesis of photoelectrode on Ti Plate had been demonstrated. Further investigations on controlling the size and morphology for better performance of single and double metal phosphates will be done.

  1. Synthesis and characterization of the Y-type barium hexaferrite (Ba{sub 2}CoZnFe{sub 12}O{sub 22}) obtained by ultrasonic interdispersion of chemical precitates; Sintese e caracterizacao de hexaferrita de bario tipo Y (Ba{sub 2}CoZnFe{sub 12}O{sub 22}) obtida por interdispersao ultrassonica de precipitado quimico

    Energy Technology Data Exchange (ETDEWEB)

    Junior, E.S.G.; Santos, M.R.C.; Jardim, P.M.; Ogasawara, T.; Almeida, L.H., E-mail: edil@metalmat.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Departamento de Engenharia Metalurgica e Materiais

    2011-07-01

    This work is to study the synthesis and characterization of the Y-type barium hexaferrite powder (Ba2CoZnFe12O22) by chemical precipitation of the precursor materials Fe(OH)3, Co(OH)2, Zn(OH)2 and Ba(OH)2 separately and ultrasonic inter-dispersion, followed by drying and calcining. The study shows that the phase formation of the Y-type barium hexaferrite begins to emerge already at a temperature of 900 ° C with further phases still present, characterized by X-ray diffraction, the grain growth of the final product of the synthesis as a function of calcination temperature is visible by SEM, the measured magnetic of the powder through the hysteresis curve confirms that the material is magnetically soft at room temperature. The synthesis method developed in this research is an option to achieve the results that would be obtained if the co-precipitation of the ferric hydroxides, of cobalt, zinc and barium were thermodynamically possible. (author)

  2. Síntese e caracterização de óxido hidróxido de manganês do tipo manganita (γ -MnOOH Synthesis and characterization of manganese oxyhydroxide manganite (γ -MnOOH type

    Directory of Open Access Journals (Sweden)

    B. A. M. Figueira

    2008-06-01

    Full Text Available Óxido hidróxido de manganês (γ - MnOOH do tipo da manganita foi sintetizado por uma rota simples, em que a chave precursora K-birnessita foi preparada pelo método sol-gel. O tratamento hidrotermal da estrutura lamelar do tipo da birnessita favorece a obtenção de estruturas em túnel, sendo que o tamanho destes túneis depende das condições empregadas na síntese (pH, temperatura e tempo. A comprovação da formação de manganita sob as condições de síntese empregadas foi verificada pelas técnicas de difração de raios X, microscopia eletrônica de varredura, análises termogravimétrica e térmica diferencial e espectroscopia de infravermelho.Manganese oxyhydroxide (g - MnOOH of the manganite type has been synthesized by a simple route with K-birnessite prepared by the sol-gel method. The hydrothermal treatment of the lamellar birnessite type structure facilitates the formation of tunnel structures where the size of the tunnels depends on the synthesis conditions (pH, temperature and time. The evidence of manganite formation under the synthesis conditions were made by X-ray diffraction, scanning electron microscopy, thermogravimetry, differential thermal analysis and infrared spectroscopy.

  3. Synthesis and characterization of magnetite nanoparticles coated with lauric acid

    Energy Technology Data Exchange (ETDEWEB)

    Mamani, J.B., E-mail: javierbm@einstein.br [Instituto do Cérebro-InCe, Hospital Israelita Albert Einstein-HIAE, 05651-901 São Paulo (Brazil); Costa-Filho, A.J. [Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto, Universidade de São Paulo, Ribeirão Preto (Brazil); Cornejo, D.R. [Instituto de Física Universidade de São Paulo, USP, São Paulo (Brazil); Vieira, E.D. [Instituto de Física, Universidade Federal de Goiás, Goiânia (Brazil); Gamarra, L.F. [Instituto do Cérebro-InCe, Hospital Israelita Albert Einstein-HIAE, 05651-901 São Paulo (Brazil)

    2013-07-15

    Understanding the process of synthesis of magnetic nanoparticles is important for its implementation in in vitro and in vivo studies. In this work we report the synthesis of magnetic nanoparticles made from ferrous oxide through coprecipitation chemical process. The nanostructured material was coated with lauric acid and dispersed in aqueous medium containing surfactant that yielded a stable colloidal suspension. The characterization of magnetic nanoparticles with distinct physico-chemical configurations is fundamental for biomedical applications. Therefore magnetic nanoparticles were characterized in terms of their morphology by means of TEM and DLS, which showed a polydispersed set of spherical nanoparticles (average diameter of ca. 9 nm) as a result of the protocol. The structural properties were characterized by using X-ray diffraction (XRD). XRD pattern showed the presence of peaks corresponding to the spinel phase of magnetite (Fe{sub 3}O{sub 4}). The relaxivities r{sub 2} and r{sub 2}* values were determined from the transverse relaxation times T{sub 2} and T{sub 2}* at 3 T. Magnetic characterization was performed using SQUID and FMR, which evidenced the superparamagnetic properties of the nanoparticles. Thermal characterization using DSC showed exothermic events associated with the oxidation of magnetite to maghemite. - Highlights: • Synthesis of magnetic nanoparticles coated with lauric acid • Characterization of magnetic nanoparticles • Morphological, structural, magnetic, calorimetric and relaxometric characterization.

  4. Synthesis and characterization of Trichloroisocyanouric acid ...

    Indian Academy of Sciences (India)

    Abstract. Trichloroisocyanouric acid (TCCA)-functionalized mesoporous silica nanocomposites (SBA/. TCCA) were synthesized and characterized for the acylation of indole. The uniform incorporation of TCCA inside the SBA-15 matrix was confirmed by standard characterization techniques (PXRD, Adsorption studies,. FT-IR ...

  5. The synthesis and characterization of iron nanoparticles

    Science.gov (United States)

    Bennett, Tyler

    Nanoparticle synthesis has garnered attention for technological applications for catalysts, industrial processing, and medical applications. The size ranges for these is in the particles nanostructural domain. Pure iron nanoparticles have been of particular interest for their reactivity and relative biological inertness. Applications include cancer treatment and carrying medicine to a relevant site. Unfortunately, because of their reactivity, pure iron nanoparticles have been difficult to study. This is because of their accelerated tendency to form oxides in air, due to the increased surface area to volume ratio. Using synthesis processes with polyphenols or long chain amines, air stable iron nanoparticles have been produced with a diameter size range of ~ 2 to about ~10 nm, but apparently have transformed due to internal pressure and crystallographic defects to the FCC phase. The FCC crystals have been seen to form icosahedral and decahedral shapes. This size is within the range for use as a catalyst for the growth of both carbon nanotubes and boron nitride nanotubes as well for biomedical applications. The advantages of these kinds of catalysts are that nanotube growth can be for the first time separated from the catalyst formation. Additionally, the catalyst size can be preselected for a certain size nanotube to grow. In summary: (1) we found the size distributions of nanoparticles for various synthesis processes, (2) we discovered the right size range for growth of nanotubes from the iron nanoparticles, (3) the nanoparticles are under a very high internal pressure, (4) the nanoparticles are in the FCC phase, (5) they appear to be in icosahedral and decahedral structures, (6) they undergo room temperature twinning, (7) the FCC crystals are distorted due to carbon in octahedral sites, (8) the iron nanoparticles are stable in air, (9) adding small amounts of copper make the iron nanoparticles smaller.

  6. Synthesis and characterization of nanosize sodium titanates

    Energy Technology Data Exchange (ETDEWEB)

    Elvington, M. C.; Tosten, M.; Taylor-Pashow, K. M. L.; Hobbs, D. T., E-mail: david.hobbs@srnl.doe.gov [Savannah River National Laboratory (United States)

    2012-11-15

    This paper describes the synthesis and peroxide-modification of nanosize monosodium titanate (nMST). The synthesis method was derived from a sol-gel process used to produce micron-sized monosodium titanate (MST). Key modifications to this process include altering reagent concentrations, omitting a particle seed step, and introducing a non-ionic surfactant to facilitate control of particle formation and growth. The nMST material exhibits spherical-shaped particle morphology with a monodisperse distribution of particle diameters in the range from 100 to 150 nm. The BET surface area and isoelectric point of the nMST measured 285 m{sup 2} g{sup -1} and 3.34 pH units, respectively, which is more than an order of magnitude higher in surface area and a pH unit lower than that measured for the microsize MST. The nMST material serves as an effective ion exchanger under both weakly acidic and strongly alkaline conditions and was converted to a peroxotitanate form by reaction with hydrogen peroxide.

  7. Synthesis and characterization of CuO nanoparticles using strong ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of CuO nanoparticles using strong base electrolyte ... Fourier transform infrared spectrum showed that the CuO ..... Hydrogen bub- bles play a key role in generation of sparks and metal removal in the electrochemical discharge process. Flower-like morphology could be attained with both the.

  8. Synthesis, characterization and crystal structure of new nickel ...

    Indian Academy of Sciences (India)

    School of Chemistry, University College of Science, University of Tehran, Tehran, Iran. Email: alnema@khayam.ut.ac.ir ... nation polymers and coordination complexes, is a suit- able building block for supramolecular ..... Kianpour G, Salavati-Niasari M and Emadi H 2013. Precipitation synthesis and characterization of cobalt.

  9. Synthesis and characterization of cupric oxide (CuO) nanoparticles ...

    African Journals Online (AJOL)

    Synthesis and characterization of cupric oxide (CuO) nanoparticles and their application for the removal of dyes. ... Thermodynamic and kinetic studies were also performed to determine the feasibility of the process. The maximum MB removal was observed to be 88.93%. The pH of point zero charge (pHPZC) of adsorbent ...

  10. Synthesis, spectral characterization and redox properties of iron (II ...

    Indian Academy of Sciences (India)

    Unknown

    Synthesis, spectral characterization and redox properties of iron. (II) complexes of 1-alkyl-2-(arylazo)imidazole. U S RAY, D BANERJEE and C SINHA*. Department of Chemistry, The University of Burdwan, Burdwan 713 104,. India e-mail: c_r_sinha@yahoo.com. MS received 26 February 2003; revised 12 May 2003.

  11. Synthesis and characterization of reactive dye-cassava mesocarp ...

    African Journals Online (AJOL)

    The synthesis of triazine based reactive dyes was carried out. The resultant dyes were characterized by thin layers chromatography, molecular weight, infrared and ultra- violet spectroscopy, and used in dyeing cassava mesocarp to produce dye modified cellulosic substrates. The dyed substrates were tested for dye fixation, ...

  12. Synthesis and characterization of nano silicon and titanium nitride ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of nano silicon and titanium nitride powders using atmospheric microwave plasma technique ... nucleation of silicon vapour produced by the radial injection of silicon tetrachloride vapour and nano titanium nitride was synthesized by using liquid titanium tetrachloride as the precursor.

  13. Synthesis, characterization, crystal structure and DNA-binding study ...

    Indian Academy of Sciences (India)

    BOLIN

    SYNOPSIS. Synthesis and characterization of four mononuclear eight coordinated cadmium(II) complexes with newly explored carboxamide derivatives and study of interaction with calf-thymus DNA are reported. The results suggest that neutral complexes 2a and 2b bind to DNA in an intercalative mode. On the other hand, ...

  14. Synthesis, spectral characterization of Schiff base transition metal ...

    Indian Academy of Sciences (India)

    TECS

    Synthesis, spectral characterization of Schiff base transition metal complexes: DNA cleavage and antimicrobial activity studies. N RAMAN,* J DHAVEETHU RAJA and A SAKTHIVEL. Department of Chemistry, VHNSN College, Virudhunagar 626 001 e-mail: drn_ raman@yahoo.co.in. MS received 1 May 2007; revised 7 July ...

  15. Synthesis, characterization and emission properties of quinolin-8 ...

    Indian Academy of Sciences (India)

    Unknown

    Synthesis, characterization and emission properties of quinolin-8-olato chelated ruthenium organometallics. BIKASH KUMAR PANDA. Department of Inorganic Chemistry, Indian Association for the Cultivation of Science, Kolkata 700 032,. India e-mail: b_panda@hotmail.com. MS received 2 June 2004; revised 21 July 2004.

  16. Synthesis & Characterization of New bis-Symmetrical Adipoyl ...

    African Journals Online (AJOL)

    Full Title: Synthesis and Characterization of New bis-Symmetrical Adipoyl, Terepthaloyl, Chiral Diimido-di-L-alanine Diesters and Chiral Phthaloyl-L-alanine Ester of Tripropoxy p-tert-Butyl Calix[4]arene and Study of Their Hosting Ability for Alanine and Na+. Bis-symmetrical tripropoxy p-tert-butyl calix[4]arene esters were ...

  17. Synthesis, characterization of N-, S-, O-substituted naphtho- and ...

    Indian Academy of Sciences (India)

    Sci. Vol. 124, No. 3, May 2012, pp. 657–667. c Indian Academy of Sciences. Synthesis, characterization of N-, S-, O-substituted naphtho- and benzoquinones and a structural study. CEMIL IBIS. ∗ and NAHIDE GULSAH DENIZ. Engineering Faculty, Department of Chemistry, Division of Organic Chemistry, Istanbul University,.

  18. Synthesis, characterization and self-assembly of Co 3 complexes ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 126; Issue 5. Synthesis, characterization and self-assembly of Co3+ complexes appended with phenol and catechol groups. Afsar Ali Deepak Bansal Rajeev Gupt. Special issue on Chemical Crystallography Volume 126 Issue 5 September 2014 pp 1535-1546 ...

  19. Synthesis, characterization and investigation of catalytic activity of ...

    Indian Academy of Sciences (India)

    J. Chem. Sci. Vol. 124, No. 4, July 2012, pp. 827–834. c Indian Academy of Sciences. Synthesis, characterization and investigation of catalytic activity ..... 2004 J. Catal. 222 107. 8. Rajgopal R, Vetrivel R and Rao B S 2000 Catal. Lett. 65 99. 9. Rao B S, Sreekumar K and Jyothi T M 1998 Indian. Patent 2707/98. 10.

  20. Synthesis, spectral characterization and antihaemostatic activity of 1 ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 118; Issue 2. Synthesis, spectral characterization and antihaemostatic activity of 1,2,4-triazoles ... Author Affiliations. Ravindra R Kamble1 Belgur S Sudha1. Department of Chemistry and Food Science, Yuvaraja's College, University of Mysore, Mysore 570 005 ...

  1. Synthesis and photoelectrochemical characterization of a high molar ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 4. Synthesis and photoelectrochemical characterization of a high molar extinction coefficient heteroleptic ruthenium(II) complex. L Giribabu Vrun Kumar Singh M Srinivasu Ch Vijay Kumar V Gopal Reddy Y Soujnya P Yella Reddy. Volume 123 Issue 4 July ...

  2. An efficient synthesis, X-ray and spectral characterization of ...

    Indian Academy of Sciences (India)

    An efficient synthesis, X-ray and spectral characterization of biphenyl derivatives. Ravindra R Kamble Dharesh B Biradar Gangadhar Y Meti Tasneem Taj Tegginamath Gireesh Imthiyaz Ahmed M Khazi Sundar T Vaidyanathan Raju Mohandoss Balasubramanian Sridhar Viraraghav Parthasarathi. Volume 123 Issue 4 July ...

  3. Synthesis and characterization of magnetite/hydroxyapatite tubes ...

    Indian Academy of Sciences (India)

    ... Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 39; Issue 2. Synthesis and characterization of magnetite/hydroxyapatite tubes using natural template for biomedical applications. M SNEHA N MEENAKSHI SUNDARAM A KANDASWAMY. Volume 39 Issue 2 April ...

  4. Synthesis, characterization and magnetic properties of polyaniline/ γ ...

    Indian Academy of Sciences (India)

    Administrator

    deposition technique by placing fine-graded γ-Fe2O3 in a polymerization mixture of aniline. The composites are characterized by using ... All chemicals of analytical grade procured from Sigma-. Aldrich were used for the synthesis of .... PANI seem to exhibit transition peaks in the temperature range of 125–175°C. In case of ...

  5. Synthesis, characterization of N-, S-, O-substituted naphtho- and ...

    Indian Academy of Sciences (India)

    657–667. c Indian Academy of Sciences. Synthesis, characterization of ... naphthoquinone) were investigated.16 Novel vitamin K3 analogues were ... 1.2Ueq(C). The selected bond distances, bond and tor- sion angles for compound 13 were listed in tables 2 and 3, respectively. Drawings were performed with the program ...

  6. organic-inorganic hybrid materials. i: synthesis, characterization and ...

    African Journals Online (AJOL)

    a

    organic-inorganic nanocomposites, and models in the area of biomimetics [13]. Hence, with a focus towards developing a potential photoresist material that has a lithographic action [14], we report herein the facile synthesis, characterization and properties of a novel octasilsesquioxane, which by virtue of its terminal chlorine ...

  7. Synthesis, characterization, X-ray crystal structure, electrochemical ...

    Indian Academy of Sciences (India)

    DOI 10.1007/s12039-015-0978-8. Synthesis, characterization, X-ray crystal structure, electrochemical evaluation and anti-cancer studies of a mixed ligand Cu(II) complex of (E)-N -((2-hydroxynaphthalen-1-yl)methylene)acetohydrazide. IRAN SHEIKHSHOAIEa, S YOUSEF EBRAHIMIPOURa,∗, MAHDIEH SHEIKHSHOAIEa,.

  8. Synthesis, characterization and isotherm studies of new composite ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 7. Synthesis, characterization and isotherm ... With different methods, different molar ratios and different surfactants have been investigated to reach the optimum conditions for synthesized zirconium tungstate (Zr(IV)W). Zr(IV)W with different molar ratios of ...

  9. Synthesis, characterization and ion recognition studies of lower rim ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 6. Synthesis, characterization and ion recognition studies of lower rim 1,3-di{rhodamine} conjugate of calix[4]arene. Jugun Prakash Chinta Jayaraman Dessingou Chebrolu Pulla Rao. Regular Articles Volume 125 Issue 6 November 2013 pp 1455-1461 ...

  10. Synthesis and characterization of new meso-substituted ...

    Indian Academy of Sciences (India)

    The synthesis and characterization of new meso-substituted unsymmetrical metalloporphyrins has been described. A new modified Adler method ... P Bandgar1 Pradip B Gujarathi1. Organic Chemistry Research Laboratory, School of Chemical Sciences, Swami Ramanand Teerth Marathwada University, Nanded 431 606 ...

  11. Synthesis and characterization of solid heterogeneous catalyst for ...

    African Journals Online (AJOL)

    Synthesis and characterization of solid heterogeneous catalyst for the production of biodiesel from high FFA waste cooking oil. Nasar Mansir, Taufiq-Yap Yun Hin. Abstract. No Abstract. Keywords: Biodiesel, Transesterification, High FFA waste cooking oil, Heterogeneous catalyst, Single step reaction process. Full Text:.

  12. Synthesis, characterization and photo-epoxidation performance of ...

    Indian Academy of Sciences (India)

    Synthesis, characterization and photo-epoxidation performance of Au-loaded photocatalysts. VAN-HUY NGUYEN, HSIANG-YU CHAN and JEFFREY C S WU. ∗. Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan e-mail: cswu@ntu.edu.tw. MS received 7 November 2012; revised 11 ...

  13. Synthesis and characterization of thermally stable oligomer-metal ...

    African Journals Online (AJOL)

    Synthesis and characterization of thermally stable oligomer-metal complexes of copper(II), nickel(II), zinc(II) and cobalt(II) derived from oligo- p - nitrophenylazomethinephenol. ... Based on half degradation temperature parameters Cu(II) and Zn(II) complexes were more resistant than the others. KEY WORDS: Oligomer metal ...

  14. Synthesis, characterization and evaluation of biological activities of ...

    African Journals Online (AJOL)

    Original Research Article. Synthesis, characterization and evaluation of biological activities of manganese-doped zinc oxide nanoparticles. Shakeel Ahmad Khan1*, Sammia Shahid1, Waqas Bashir1, Sadia Kanwal2 and. Ahsan Iqbal3. 1Department of Chemistry, University of Management and Technology, Lahore-54000, ...

  15. SYNTHESIS, CHARACTERIZATION AND BIOACTIVITY Zn2+, Cu2+ ...

    African Journals Online (AJOL)

    The work extended to synthesis the Zn2+, Ni2+, Cu2+, Co2+, Mn2+, Ru3+, Fe3+,. VO2+ and UO2. 2+ complexes with the prepared ligand to evaluate the effect of azo group on the microbicides activities of the prepared compounds. All compounds were characterized by spectroscopic and analytical tools like elemental and ...

  16. Synthesis, structural characterization and biological activity of a ...

    Indian Academy of Sciences (India)

    3.1 Synthesis and formulation. Schiff base ligand H2L was synthesized by 1:1 conden- sation of O-aminophenol and O-vanillin in dehydrated alcohol. 1 was prepared using reaction among Zn(II) salt and the ligand in methanol. Coordination geo- metry of 1 was determined by different spectroscopic characterization.

  17. Large scale synthesis and characterization of Ni nanoparticles by ...

    Indian Academy of Sciences (India)

    ... Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 31; Issue 1. Large scale synthesis and characterization of Ni nanoparticles by solution reduction method. Huazhi Wang Xinli Kou Jie Zhang Jiangong Li. Nanomaterials Volume 31 Issue 1 February 2008 pp 97-100 ...

  18. Synthesis and characterization of bi-functional magneto-luminescent ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 128; Issue 7. Synthesis and characterization of bi-functional magneto-luminescent Fe₃O₄ @ SiO₂ @ NaLuF₄ :Eu³⁺ hybrid core / shell nanospheres. JIGMET LADOL HEENA KHAJURIA HAQ NAWAZ SHEIKH YUGAL KHAJURIA. Regular Article Volume 128 Issue ...

  19. SYNTHESIS AND CHARACTERIZATION OF N, N'-BIS-(3 ...

    African Journals Online (AJOL)

    user

    base complexes derived from Salicylaldehyde and histidine with some divalent transition metal ions. Furthermore, Syed (1993) reported the synthesis, characterization and biological evaluation of some. Schiff base metal complexes derived from Anthranilic acid-sugar and naturally occurring amino acid-sugar. Schiff bases ...

  20. Synthesis, characterization and antimicrobial studies of cadmium(II)

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 130; Issue 4. Synthesis, characterization and antimicrobial studies of cadmium(II) complexes with a tetraazamacrocycle (LB) and its cyanoethyl N-pendent derivative (LBX). MD SHAH ALAM SASWATA RABI MD MASUDUR RAHMAN ADRITY BAIDYA MANASHI DEBI ...

  1. Synthesis and spectroscopic characterization of palladium-doped ...

    Indian Academy of Sciences (India)

    Abstract. In this work, we reported synthesis of palladium (Pd)-doped titanium dioxide (TiO2) (Pd-TiO2) nanopar- ticles by the sol–gel-assisted method. The synthesized Pd-doped TiO2 nanoparticles were characterized using X-ray diffraction, transmission electronic microscopy, energy-dispersive spectroscopy, Fourier ...

  2. Synthesis and Characterization of Pyridine Functionalized ...

    African Journals Online (AJOL)

    picolyl) imidazolium salts (1). Treatment of the synthesized imidazolium salt with silver(I) oxide resulted in the formation of bis NHC silver(I) complex (2). The compound was characterized spectroscopically (NMR, mass spectrometry), by elemental ...

  3. Electrochemical synthesis and spectroscopic characterization of ...

    African Journals Online (AJOL)

    phenylpyrrole) coatings in an organic medium on iron and platinum electrodes. ... XPS measurements, infrared (FT-IR) and electronic absorption (UV-vis) spectroscopies were used to characterize the iron and platinum-coated electrodes. Finally the ...

  4. Synthesis, characterization and electrochemistry of heterobimetallic ...

    African Journals Online (AJOL)

    dimethylpyrazolyl) borate with a series of manganese(II) Schiff bases have been synthesized. Characterization by UV, IR, MS and elemental analysis support their formulations. Cyclic and differential pulse voltammograms of manganese(II) Schiff base ...

  5. Synthesis and characterization of hybrid nanostructures

    Directory of Open Access Journals (Sweden)

    Taleb Mokari

    2011-05-01

    Full Text Available There has been significant interest in the development of multicomponent nanocrystals formed by the assembly of two or more different materials with control over size, shape, composition, and spatial orientation. In particular, the selective growth of metals on the tips of semiconductor nanorods and wires can act to couple the electrical and optical properties of semiconductors with the unique properties of various metals. Here, we outline our progress on the solution-phase synthesis of metal-semiconductor heterojunctions formed by the growth of Au, Pt, or other binary catalytic metal systems on metal (Cd, Pb, Cu-chalcogenide nanostructures. We show the ability to grow the metal on various shapes (spherical, rods, hexagonal prisms, and wires. Furthermore, manipulating the composition of the metal nanoparticles is also shown, where PtNi and PtCo alloys are our main focus. The magnetic and electrical properties of the developed hybrid nanostructures are shown.

  6. Synthesis, characterization and photophysical studies of ...

    Indian Academy of Sciences (India)

    These novel zinc(II) porphyrin-benzo--pyrone dyads successfully underwent demetallation in the presence of concentrated hydrochloric acid in chloroform at 25°C to form the corresponding free-base porphyrin analogues in good yields. The newly synthesized products were characterized on the basis of spectral data and ...

  7. Synthesis and characterization of fluorophore attached silver ...

    Indian Academy of Sciences (India)

    Silver nanoparticles stabilized by soluble starch were synthesized and characterized. in vivo studies in rats showed no toxicity and revealed their distribution in various tissues and permeability across BBB. This starch stabilized silver nanoparticles have good biological characteristics to act as a potential promising vector for ...

  8. Synthesis, characterization and photocatalytic reactions of ...

    Indian Academy of Sciences (India)

    Titanium dioxide is one of the most extensively investigated photocatalyst and is the subject of extensive .... with commercial titania powder from Merck. 2.2 Characterization. X-ray diffraction patterns of the ..... Bickley R I and Navio J A 1985 Photocatalytic production of energy-rich compounds (eds) G Grassi and D O Hall ...

  9. Synthesis, crystal structures, spectroscopic characterization and in ...

    Indian Academy of Sciences (India)

    Both the complexes were structurally characterized by single crystal XRD. The crystal structure of complex 1 displays a distorted square pyramidal geometry in which Schiff base is coordinated to the Cu(II) ion via ONO-donor in the axial mode, whereas, the chelating diamine displays axial and equatorial mode of binding via ...

  10. Synthesis and characterization of multicolour fluorescent ...

    Indian Academy of Sciences (India)

    Abstract. In this study, we successfully developed Y2O3 nanoparticles doped with Tb3+ and Eu3+ ions to generate fluorescent images of latent fingerprints. The optical and structural characterization of the nanoparticles was carried out and the fluorescence mechanisms are discussed. In our studies, the developed ...

  11. SYNTHESIS AND CHARACTERIZATION OF NEW HEAT ...

    African Journals Online (AJOL)

    Preferred Customer

    ABSTRACT. New series of olefinic poly(ether-amide)s (OPEA)s 6a-f was synthesized from 4,4′-bis(1,4- diphenoxybutane)diacrylic acid 4 and aromatic diamine 5a-f via a direct polycondensation reaction. The resulting polymers were characterized by Fourier transform infrared spectra (FTIR), nuclear magnetic resonance ...

  12. Synthesis, characterization and antimicrobial activity of mixed ...

    African Journals Online (AJOL)

    A new series of Mn(II), Fe(II), Co(II), Cu(II) and Zn(II) mixed ligands-metal complexes derived from salicylic acid (SA) and 1,10-phenanthroline (PHEN) have been synthesized and characterized by spectroscopic studies. The coordination of the two ligands towards central metal ions has been proposed in the light of ...

  13. Synthesis, spectrometric characterization and trypanocidal activity of ...

    African Journals Online (AJOL)

    ... Coupled with High-Performance Liquid Chromatography) and they were characterized using spectrometry IR, NMR 1H and 13C (Nuclear Magnetic Resonance). These compounds were then tested in vitro on Trypanosoma brucei brucei according to the “LILIT, Alamar Blue” method to estimate their trypanocidal activity.

  14. Synthesis, characterization and gas sensing performance of ...

    Indian Academy of Sciences (India)

    The product obtained was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscope, thermogravimetric analysis and magic-angle spin nuclear magneticresonance (MAS NMR). The crystal structure of the product was determined from X-ray powder diffraction data by applying ...

  15. synthesis, characterization and antibacterial studies of metal

    African Journals Online (AJOL)

    Preferred Customer

    sulfonamide (sulfadiazine) with some N-alkyl-N-phenyl dithiocarbamate have been synthesized and characterized by elemental analysis, conductivity measurements, UV-Vis and FTIR spectroscopy. The complexes are formulated as four coordinate MN2S2 species in which the metal ions are coordinated to one molecule of.

  16. Synthesis, Characterization, Antimicrobial Activity and Antioxidant ...

    African Journals Online (AJOL)

    The Schiff base ligand and the metal (II) complexes prepared were characterized by melting point/decomposition temperature, solubility, conductivity, FT-IR spectra and elemental analysis results. IR spectra of the free ligand showed a band at 1655cm-1 which is assigned to the (-C=N-) stretching vibration of the azomethine.

  17. Biomimetic synthesis and characterization of semiconducting hybrid

    Indian Academy of Sciences (India)

    Triple hybrid materials based on polyaniline-polyethylene glycol and cadmium sulphide have been prepared by the duffusion–limited biomimetic route and characterized by a number of spectroscopic, XRD, SEM, thermal and electrical measurements. These hybrid materials have been prepared by controlled precipitation of ...

  18. Synthesis and characterization of sodium alkoxides

    Indian Academy of Sciences (India)

    These compounds were characterized using X-ray diffraction technique and IR spectroscopy. The elemental analysis was carried out by CHNS analyser and atomic emission spectroscopy. Normal chain sodium alkoxides were found to exhibit tetragonal crystal structure. Crystal structures of sodium ethoxide and sodium ...

  19. Synthesis, characterization and antibacterial studies of metal ...

    African Journals Online (AJOL)

    Co(II), Cu(II), Pd(II) and Pt(II) complexes of 4-amino-N-(2-pyrimidinyl)benzene sulfonamide (sulfadiazine) with some N-alkyl-N-phenyl dithiocarbamate have been synthesized and characterized by elemental analysis, conductivity measurements, UV-Vis and FTIR spectroscopy. The complexes are formulated as four ...

  20. Synthesis and characterization of superabsorbent hydrogel based ...

    African Journals Online (AJOL)

    In this work, acrylonitrile (AN) and acrylic acid (AA) monomers were directly grafted onto chitosan using ammonium persulfate (APS) as an initiator and methylenebisacrylamide (MBA) as a crosslinking agent under an inert atmosphere. The hydrogels structure was characterized by Fourier transform infrared (FTIR) ...

  1. Synthesis, characterization and gas sensing property of ...

    Indian Academy of Sciences (India)

    Hydroxyapatite (HAp) biomaterial ceramic was synthesized by three different processing routes viz. wet chemical process, microwave irradiation process, and hydrothermal technique. The synthesized ceramic powders were characterized by SEM, XRD, FTIR and XPS techniques. The dielectric measurements were carried ...

  2. Synthesis, characterization and gas sensing performance of ...

    Indian Academy of Sciences (India)

    The product obtained was characterized by Fourier transform infrared spectroscopy,. X-ray diffraction, scanning electron microscope, thermogravimetric analysis and magic-angle spin nuclear mag- netic resonance (MAS NMR). The crystal structure of the product was determined from X-ray powder diffraction data by ...

  3. Synthesis, physical characterization, antibacterial activity and ...

    African Journals Online (AJOL)

    Some five-coordinated cobalt(III) complexes were synthesized and characterized using elemental analysis, 1H NMR and IR spectra. The formation constants and the thermodynamic parameters were measured spectrophotometrically for the 1:1 adduct formation of [Co(Chel)(PBu3)]ClO4.H2O where Chel = cd3OMesalen, ...

  4. Biomimetic synthesis and characterization of semiconducting hybrid ...

    Indian Academy of Sciences (India)

    Triple hybrid materials based on polyaniline-polyethylene glycol and cadmium sulphide have been prepared by the duffusion–limited biomimetic route and characterized by a number of spectroscopic, XRD, SEM, thermal and electrical measurements. These hybrid materials have been prepared by controlled precipitation of ...

  5. Synthesis, characterization and antimicrobial screening of hybrid ...

    Indian Academy of Sciences (India)

    chloroquinolin-3-yl)-6-(aryl)pyrimidin-2-yl)-2-morpholinoacetamides (5a-l) were synthesized by multistep reactions. Compounds were characterized by IR, NMR and mass spectra. Antimicrobial screening of title compounds (5a-l) was carried out ...

  6. Synthesis, Characterization and Antimicrobial Activities of Some ...

    African Journals Online (AJOL)

    Some transition metal complexes of nicotinamide have been prepared and characterized using melting point, conductivity measurement, infrared, electronic, HNMR and atomic absorption spectroscopic methods. . The antibacterial and antifungal studies of the metal complexes and the ligand have been evaluated against ...

  7. Synthesis, characterization, and utilization of polyol amphiphile molecules

    Science.gov (United States)

    Osenar, Paul

    1998-12-01

    Recent interest in self-organizing systems has led to the development of numerous novel molecules. This work describes the synthesis and characterization of a new type of amphiphile based on polar moieties of oligo(vinyl alcohol). The use of oligomeric moieties allows access to hydroxylated, nonionic amphiphiles beyond those available via the alkylation of various carbohydrates. Two synthetic pathways have been developed based on a precursor diblock structure of a hydrophobe and an oligo(vinyl ether) chain. The first methodology relies on aldol group transfer polymerization of various silyl vinyl ether monomers. In this method, a functionalized initiator was designed based on 4-hydroxybenzaldehyde in order to synthesize oligomers with a phenol terminus. Incorporation of a hydrophobic moiety was then accomplished via esterification to this terminus. A second approach to the precursor diblock was also developed based on direct initiation with a hydrophobe. Here, an aldehyde terminated hydrophobe was converted into an alpha-iodoether by reaction with trimethylsilyl iodide. In the presence of a Lewis acid catalyst, various alkyl vinyl ether oligomers can be grown from the hydrophobe via cationic polymerization techniques. These diblock structures can be converted to polyol amphiphiles by cleaving the ether side groups to yield a chain of hydroxyl groups. In the case of the silyl ethers, cleavage occurs with exposure to hydrofluoric acid; while those based on t-butyl ethers can be converted to silyl ethers with trimethylsilyl iodide and subsequently cleaved with fluoride ion. Polyol amphiphiles were synthesized with various hydroxyl chain lengths and hydrophobic moieties, including oleyl and oligo(styrene). These novel amphiphiles are predictably hygroscopic, forming lyotropic liquid crystals upon exposure to water. The resulting lamellar and hexagonal mesophases were characterized by a variety of techniques including small angle x-ray scattering and polarized optical

  8. Synthesis and characterization of melanin in DMSO

    Science.gov (United States)

    Bronze-Uhle, Erika S.; Batagin-Neto, Augusto; Xavier, Pedro H. P.; Fernandes, Nicole I.; de Azevedo, Eduardo R.; Graeff, Carlos F. O.

    2013-09-01

    Recently soluble melanin derivatives have been obtained by a synthetic procedure carried out in DMSO (D-melanin). In this work a comparative study of the structural characteristics of synthetic melanin derivatives obtained by oxidation of L-DOPA in H2O and DMSO are presented. To this end, Fourier-transform infrared spectroscopy as well as proton and carbon nuclear magnetic resonance techniques has been employed. In addition, aging effects have been investigated for D-melanin. The results suggest that sulfonate groups (-SO2CH3) from the oxidation of DMSO, are incorporated into melanin, which confers protection to the phenolic hydroxyl group present in its structure. The solubility of D-melanin in DMSO is attributed to the presence of these groups. When D-melanin is left in air for long time periods, the sulfonate groups leave the structure, and an insoluble compound is obtained. NaOH and water have been used, in order to accelerate the release of the sulfonate groups attached to D-melanin, thereby corroborating the proposed structure and the synthesis mechanism.

  9. Synthesis and characterization of porous calcium phosphate

    International Nuclear Information System (INIS)

    Granados C, F.; Serrano G, J.; Bonifacio M, J.

    2007-01-01

    The porous calcium phosphate was prepared by the continuous precipitation method using Ca(NO 3 ) 2 .4H 2 O and NH 4 H 2 PO 4 salts. The synthesized material was structurally and superficially characterized using the XRD, BET, IR TGA and SEM techniques. The obtained inorganic material was identified as calcium phosphate that presents a great specific area for what can be efficiently used as adsorbent material for adsorption studies in the radioactive wastes treatment present in aqueous solution. (Author)

  10. Synthesis, characterization and evaluation of bioactivity and ...

    Indian Academy of Sciences (India)

    Abstract. Bioactive glasses in the systems SiO2–CaO–P2O5–MgO (BGZn0) and SiO2–CaO–P2O5–MgO–ZnO. (BGZn5), were prepared by sol–gel method and then characterized. Surface reactivity was studied in simulated body fluid (SBF) to determine the effect of zinc (Zn) addition as a trace element. The effect of Zn ...

  11. Synthesis, characterization and performance of bifunctional catalysts for the synthesis of menthol from citronellal

    NARCIS (Netherlands)

    ten Dam, J.; Ramanathan, A; Djanashvili, K.; Kapteijn, F.; Hanefeld, U.

    2017-01-01

    The synthesis of a series of bifunctional catalysts (1 wt% Pt/W-TUD-1 (Technische Universiteit Delft-1) and 1 wt% Pt/WO3/TUD-1) with different tungsten loadings (5-30 wt% WO3) is described. They were characterized using ICP-OES, INAA, N2 physisorption, XRD and

  12. Synthesis and characterization of dihexyldithiocarbamate as a chelating agent in extraction of gold(III)

    Energy Technology Data Exchange (ETDEWEB)

    Fatimah, Soja Siti, E-mail: soja-sf@upi.edu [Departemen Pendidikan Kimia, Universitas Pendidikan Indonesia, Jl. Dr. Setiabudhi No. 229, Bandung 40154 (Indonesia); Department of Chemistry, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang, Km. 21, Jatinangor (Indonesia); Bahti, Husein H.; Hastiawan, Iwan [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Padjadjaran University, Jl. Raya Bandung-Sumedang, Km. 21, Jatinangor (Indonesia); Permanasari, Anna [Departemen Pendidikan Kimia, Universitas Pendidikan Indonesia, Jl. Dr. Setiabudhi No. 229, Bandung 40154 (Indonesia)

    2016-02-08

    The use of dialkyldithiocarbamates as chelating agents of transition metals have been developing for decades. Many chelating agents have been synthesized and used in the extraction of the metals. Studies on particular aspects of extraction of the metals, such as the effect of increasing hydrophobicity of chelating agents on the effectiveness of the extraction, have been done. However, despite the many studies on the synthesis and applications of this type of chelating agents, interests in the aspect of molecular structure of the synthesized ligands and of their complexes, have been limited. This study aimed at synthesizing and characterizing dihexylthiocarbamate, and using the ligand for the extraction of gold III). Characterization of the ligand and of its metal complex were done by using elemental analysis, DTG, and spectroscopic methods to include NMR, ({sup 1}H, and {sup 13}C), FTIR, and MS-ESI. Data on the synthesis, characterization, and the application of the ligand as a chelating agent are presented.

  13. Synthesis and characterization of dihexyldithiocarbamate as a chelating agent in extraction of gold(III)

    Science.gov (United States)

    Fatimah, Soja Siti; Bahti, Husein H.; Hastiawan, Iwan; Permanasari, Anna

    2016-02-01

    The use of dialkyldithiocarbamates as chelating agents of transition metals have been developing for decades. Many chelating agents have been synthesized and used in the extraction of the metals. Studies on particular aspects of extraction of the metals, such as the effect of increasing hydrophobicity of chelating agents on the effectiveness of the extraction, have been done. However, despite the many studies on the synthesis and applications of this type of chelating agents, interests in the aspect of molecular structure of the synthesized ligands and of their complexes, have been limited. This study aimed at synthesizing and characterizing dihexylthiocarbamate, and using the ligand for the extraction of gold III). Characterization of the ligand and of its metal complex were done by using elemental analysis, DTG, and spectroscopic methods to include NMR, (1H, and 13C), FTIR, and MS-ESI. Data on the synthesis, characterization, and the application of the ligand as a chelating agent are presented.

  14. Hydrothermal synthesis, structure and characterization of new ...

    Indian Academy of Sciences (India)

    Unknown

    Keywords. Hydrothermal; crystal structure; solid electrolyte; iron (III) pyrophosphate. 1. Introduction ... tion, structure and electrical conductivity and the higher values of ..... type cavity structure. Acknowledgements. The authors would like to express their thanks to DST,. New Delhi, for financial assistance under the projects.

  15. Hydrothermal synthesis, structure and characterization of new ...

    Indian Academy of Sciences (India)

    Unknown

    The structure has tunnel-type cavities and are congenial for ion transportation through them. The compound exhibits moderate thermal stability. Keywords. Hydrothermal; crystal structure; solid electrolyte; iron (III) pyrophosphate. 1. Introduction. NASICON and related compounds belong to the well known family of solid ...

  16. Synthesis and characterization of calcium doped lanthanum ...

    Indian Academy of Sciences (India)

    56

    substituent in the A site decreases the band gap energy and changes the magnetic, electric and photocatalytic properties. In this perovskite type oxides, the doped lanthanum based La1-xAxMnO3manganites(A is an alkaline element such as Ca2+, Sr2+, Na+, K+ and etc.) have interesting properties. These materials.

  17. Synthesis, characterization, Hirshfeld surface and theoretical ...

    Indian Academy of Sciences (India)

    ALI HARCHANI

    Colour code: light blue polyhedral belong to Mo, violet polyhedral belong to P; red circle – oxygen, white ... distinguish indirect connections through NH3 group or the lattice water. between the terminal oxygen atoms of the .... ing 3D supramolecular architecture constructed of. Standberg-type polyoxometalate Struct. Chem.

  18. Synthesis and structural characterization of zirconium phosphate ...

    Indian Academy of Sciences (India)

    case the formula of the derivative should contain the monoanionic adipate fragment: (OOC-(CH2)4-COOH). This formula is in agreement with TGA .... desribed in case of other similar λ-type derivatives.6,7. The OH exchanged phase has an ... C–H symmetric and asymmetric stretching vibra- tions of dmso methyl groups and ...

  19. Synthesis and characterization of Co nanoparticles

    Science.gov (United States)

    Singh, J.; Tripathi1, J.; Kaurav, N.

    2017-05-01

    Nanoparticles of Cobalt (Co) have attracted great interest in recent years because of their unique physical and optical properties that are of industrial importance. To understand their basic properties, Co nanoparticles were synthesized by Polyol method using Cobalt acetate and ethylene glycol in the presence of some pellets of sodium hydroxide. The synthesized powder was characterized X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR). The average particle size and lattice parameter estimated by XRD were found to be ˜37.3 nm and 3.1653 Å respectively. The results suggest suitability of these nanoparticles as dopants in other materials such as polymer materials and oxides.

  20. Glutathione synthesis and homeostasis in isolated type II alveolar cells

    International Nuclear Information System (INIS)

    Saito, K.; Warshaw, J.B.; Prough, R.A.

    1986-01-01

    After isolation of Type II cells from neonatal rat lung, the glutathione (GSH) levels in these cells were greatly depressed. The total glutathione content could be increased 5-fold within 12-24 h by incubating the cells in media containing sulfur amino acids. Similarly, the activity of γ-glutamyltranspeptidase was low immediately after isolation, but was increased 2-fold during the first 24 h culture. Addition of either GSH or GSSG to the culture media increased the GSH content of Type II cells 2-2.5-fold. Buthionine sulfoximine and NaF prevented this replenishment of GSH during 24 h culture. When the rates of de novo synthesis of GSH and GSSG from 35 S-cysteine were measured, the amounts of newly formed GSH decreased to 80% in the presence of GSH or GSSG. This suggests that exogenous GSH/GSSG can be taken up by the Type II cells to replenish the intracellular pool of GSH. Methionine was not as effective as cysteine in the synthesis of GSH. These results suggest that GSH levels in the isolated Type II cell can be maintained by de novo synthesis or uptake of exogenous GSH. Most of the GSH synthesized from cysteine, however, was excreted into the media of the cultured cells indicative of a potential role for the type II cell in export of the non-protein thiol

  1. Synthesis and Characterization of Antimicrobial Nanomaterials

    Science.gov (United States)

    2013-01-01

    2013-1007, 1 March 2013. 2. INTRODUCTION Throughout the plant and animal kingdoms , organisms possess mechanisms that actively protect against...phenomenon is of particular interest, as silver inhibits the growth of a wide range of pathogenic bacteria, fungi and viruses.19 Herein, we report...several examples of fortuitous silver nanoparticle formation by various species of bacteria, fungi , and plant extracts. 29 Biosynthesis of this type

  2. Synthesis, Characterization and Application of Hydrophobic Zeolites

    OpenAIRE

    Heidari, Rulis

    2016-01-01

    The aim of the thesis was to design and synthesize a type of zeolite with the characteristics of hydrophobicity, high porosity, and proper pore size, which can be used for high-performance adsorption of ethanol from aqueous solution. In addition, the aim was to synthesize hydrophobic microporous zeolites including theoretic and experimental content. The experiment was carried out using hydroxide basic system and hydrogen fluoride neutral based on hydrothermal methods. Pure silica zeolites...

  3. Synthesis and characterization of carboxymethyl tamarind

    Directory of Open Access Journals (Sweden)

    Shunwei WU

    2015-10-01

    Full Text Available Series of carboxymethyl tamarind kernel polysaccharide (CMTKP with different degree of substitution (DS were prepared by the reactions of tamarind kernel polysaccharide (TKP and sodium monochloroacetic acid (SMCA in alkaline aqueous isopropanol. The influence of mole ratio of NaOH to SMCA, SMCA concentration, reaction temperature and time on DS, reaction efficiency (RE as well as the transmittance and apparent viscosity of CMTKP aqueous solution was investigated. The maximum DS of 0.92 and the RE of 77% were obtained. The solubility of CMTKP in cold water and the freeze-thaw stability were apparently improved and the transmittance of the mass fraction of 2% CMTKP aqueous solution could be up to 97%. Thermal stability decreased showed by TGA, and crystalline region reduced with the increasing of DS after carboxymethylation showed by XRD. The structure was characterized by FT-IR and solid-state 13C NMR.

  4. Energetic Di- and Trinitromethylpyridines: Synthesis and Characterization

    Directory of Open Access Journals (Sweden)

    Yiying Zhang

    2017-12-01

    Full Text Available Pyridine derivatives based on the addition of trinitromethyl functional groups were synthesized by the reaction of N2O4 with the corresponding pyridinecarboxaldoximes, then they were converted into dinitromethylide hydrazinium salts. These energetic compounds were fully characterized by IR and NMR spectroscopy, elemental analysis, differential scanning calorimetry (DSC, and X-ray crystallography. These pyridine derivatives have good densities, positive enthalpies of formation, and acceptable sensitivity values. Theoretical calculations carried out using Gaussian 03 and EXPLO5 programs demonstrated good to excellent detonation velocities and pressures. Each of these compounds is superior in performance to TNT, while 2,6-bis(trinitromethylpyridine (D = 8700 m·s−1, P = 33.2 GPa shows comparable detonation performance to that of RDX, but its thermal stability is too low, making it inferior to RDX.

  5. Synthesis and characterization of deuterated polyethylene

    International Nuclear Information System (INIS)

    Jia Xianbin; Luo Xuan; Chang Guanjun; Du Kai; Zhang Lin; Xie Zhengwei; Li Xinjuan; Lu Zaijun

    2009-01-01

    Due to its remarkable isotope effects, excellent kinetic stability towards C-D bond break, high degree of deuteration, and being non-radioactive, deuterated polyethylene (d-PE) is widely used in many fields, such as in inertially confined fusion (ICF) as target material, in production of low loss plastic optical fibers, and in study of the compatibility of different polymers. For the necessary of ICF, the d-PE was synthesized by the anionic polymerization and palladium-catalyzed hydrogenation. Furthermore, by the method of FTIR, 1H NMR and GPC, the deuterated ratio and structure of d-PE have been characterized. The results show that the d-PE has the high deuterated ratio and molecular weight, narrow molecular-weight distribution, the polymer material fits the basic necessary of ICF. (authors)

  6. Organic nanomaterials: synthesis, characterization, and device applications

    CERN Document Server

    Torres, Tomas

    2013-01-01

    Recent developments in nanoscience and nanotechnology have given rise to a new generation of functional organic nanomaterials with controlled morphology and well-defined properties, which enable a broad range of useful applications. This book explores some of the most important of these organic nanomaterials, describing how they are synthesized and characterized. Moreover, the book explains how researchers have incorporated organic nanomaterials into devices for real-world applications.Featuring contributions from an international team of leading nanoscientists, Organic Nanomaterials is divided into five parts:Part One introduces the fundamentals of nanomaterials and self-assembled nanostructuresPart Two examines carbon nanostructures—from fullerenes to carbon nanotubes to graphene—reporting on properties, theoretical studies, and applicationsPart Three investigates key aspects of some inorganic materials, self-assembled monolayers,...

  7. Synthesis and Characterization Studies of MIL-101

    Directory of Open Access Journals (Sweden)

    Emine Kaya EKİNCİ

    2017-12-01

    Full Text Available MIL-101 is a kind of Metal Organic Frameworks (MOFs, which have attracted much attention in the past decade due to its promising application in chemical industries. MIL-101 is also known as “Porous Chromium Terephthalate”. It has very high surface area and pore volume. MIL-101 exhibits exceptional stability against moisture and other chemicals and is composed of coordinately unsaturated Cr- sites with high concentration available for catalysis and adsorption. MIL-101 was synthesized by hydrothermal method and characterized by XRD, nitrogen adsorption and desorption analyses and SEM. XRD patterns show the presence of MIL-101’s crystal structure with high surface area (~2400 m2/g. Nitrogen adsorption-desorption analyzes showed that the material exhibited mesoporous material behavior.

  8. Characterization structural and morphology ZSM-5 zeolite by hydrothermal synthesis

    International Nuclear Information System (INIS)

    Silva, V.J.; Crispim, A.C.; Queiroz, M.B.; Laborde, H.M.; Rodrigues, M.G.F.; Menezes, R.R.

    2009-01-01

    Solid acids are catalytic materials commonly used in the chemical industry. Among these zeolites are the most important business processes including water treatment, gas separation, and cracking long hydrocarbon chains to produce high octane gasoline. Its synthesis, characterization and applications have been widely studied. The objective this study was to synthesize the ZSM-5 zeolite for future use in separation processes and catalysis. The zeolite ZSM-5 was prepared by hydrothermal synthesis at 170°C, using silica, deionized water and the director of structures (TPABr - tetrapropylammonium bromide). The materials were characterized by X ray diffraction (XRD), scanning electron microscopy (SEM) and semiquantitative chemical analysis by X ray fluorescence (XRF). According to the XRD was possible to observe the formation of ZSM-5 zeolite, with peaks intense and well defined. The SEM showed the formation of individual particles, clean, rounded shapes. (author)

  9. Synthesis and Characterization of Surface Functionalized Nanobiocomposite by Nano Hydroxyapatite

    OpenAIRE

    M. Meskinfam; M. S. Sadjadi; H. Jazdarreh

    2012-01-01

    In this study, synthesis of biomemitic patterned nano hydroxyapatite-starch biocomposites using different concentration of starch to evaluate effect of polymer alteration on biocomposites structural properties has been reported. Formation of hydroxyapatite nano particles was confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). Size and morphology of the samples were characterized using scanning and transmission electron microscopy (SEM...

  10. MFI-molecular sieve membranes:synthesis, characterization and modelling

    OpenAIRE

    Jareman, Fredrik

    2002-01-01

    This work concerns evaluation by permeation measurements and modeling of thin (<2µm) MFI molecular sieve membranes and, to a smaller extent, synthesis of such materials. The membranes have been synthesized on graded a-alumina microfiltration filters using The seed film method. Scanning electron microscopy and x-ray diffraction were used for characterization in addition to permeation measurements. Mathematical models describing membrane flux for real membranes and defect distributions were ...

  11. Open-Framework Germanates and Nickel Germanates : Synthesis and Characterization

    OpenAIRE

    Huang, Shiliang

    2012-01-01

    Microporous materials have a wide range of important applications in separation, gas adsorption, ion-exchange and catalysis. Open-framework germanates are a family of microporous compounds and are of particular interest. This thesis focuses on the synthesis and characterization of new open-framework germanates as well as introducing the transition-metal nickel into germanate structures. One new microporous germanosilicate, SU-78 and four new open-framework germanates, SU-74, SU-75, SU-69 and ...

  12. Synthesis and characterization of new amino acyl-4-thiazolidones

    Directory of Open Access Journals (Sweden)

    Ana Cristina Lima Leite

    2007-04-01

    Full Text Available A series of heterocyclic compounds with a 4-thiazolidone nucleus and amino acyl moiety were synthesized by protection reaction of thiosemicarbazide using the symmetrical anhydride (Boc2O and cyclization with chloroacetic acid under mild conditions. Trifluoroacetic acid was used to obtain 4-thiazolidone and the alpha-amino acid condensation reactions were carried out using strategies for peptide synthesis. The characterization of this new class of compounds was performed using IR and ¹H-NMR spectroscopy.

  13. Synthesis and Characterization of Chemically Etched Nanostructured Silicon

    KAUST Repository

    Mughal, Asad Jahangir

    2012-05-01

    Silicon is an essential element in today’s modern world. Nanostructured Si is a more recently studied variant, which has currently garnered much attention. When its spatial dimensions are confined below a certain limit, its optical properties change dramatically. It transforms from an indirect bandgap material that does not absorb or emit light efficiently into one which can emit visible light at room temperatures. Although much work has been conducted in understanding the properties of nanostructured Si, in particular porous Si surfaces, a clear understanding of the origin of photoluminescence has not yet been produced. Typical synthesis approaches used to produce nanostructured Si, in particular porous Si and nanocrystalline Si have involved complex preparations used at high temperatures, pressures, or currents. The purpose of this thesis is to develop an easier synthesis approach to produce nanostructured Si as well as arrive at a clearer understanding of the origin of photoluminescence in these systems. We used a simple chemical etching technique followed by sonication to produce nanostructured Si suspensions. The etching process involved producing pores on the surface of a Si substrate in a solution containing hydrofluoric acid and an oxidant. Nanocrystalline Si as well as nanoscale amorphous porous Si suspensions were successfully synthesized using this process. We probed into the phase, composition, and origin of photoluminescence in these materials, through the use of several characterization techniques. TEM and SEM were used to determine morphology and phase. FT-IR and XPS were employed to study chemical compositions, and steady state and time resolved optical spectroscopy techniques were applied to resolve their photoluminescent properties. Our work has revealed that the type of oxidant utilized during etching had a significant impact on the final product. When using nitric acid as the oxidant, we formed nanocrystalline Si suspensions composed of

  14. Synthesis and characterization of biomorphic ceramics

    International Nuclear Information System (INIS)

    Rambo, Carlos Renato

    2001-01-01

    Biotemplating represents a recently developed technology for manufacturing of biomorphous ceramics from naturally grown plant structures. This approach allows the production of ceramic materials with cellular structure, where the microstructural features of the ceramic product are similar to the native plant. After processing, the biomorphic ceramic exhibits directed pore morphology in the micrometer range. Biomorphic SiC fibers were produced from bamboo by carbothermal reduction of SiO 2 originally present in the bamboo structure. Bamboo pieces were heated up to 1500 deg C in argon to promote the reaction between carbon and silica. Biomorphic alumina, mullite and zirconia ceramics were manufactured via the sol-gel route by repeated infiltration of low viscous oxide precursors (sols) into rattan, pine and bamboo structures. The raw samples were pyrolyzed at 800 deg C in nitrogen for 1h and subsequently annealed at 1550 deg C in air. The microstructure and physical properties of the biomorphic ceramics were characterized by X-ray diffraction (XRD) and high temperature-XRD, scanning electron microscopy (SEM), porosimetry and picnometry. Thermal analysis (TGA/DTA) was performed on the infiltrated samples in order to evaluate the reactions and the total weight loss during the thermal process. The mechanical properties were evaluated by compressive strength tests. In contrast to conventional processed ceramic foam of similar porosity, the microstructure highly porous biomorphic ceramics shows uniaxial pore morphology with anisotropic properties. These properties are favorable for applications in catalyst support, filters or low-density heat insulation structures, or as biomaterials. (author)

  15. Polypeptide Grafted Hyaluronan: Synthesis and Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiaojun [ORNL; Messman, Jamie M [ORNL; Mays, Jimmy [ORNL; Baskaran, Durairaj [University of Tennessee, Knoxville (UTK)

    2010-01-01

    Poly(L-leucine) grafted hyaluronan (HA-g-PLeu) has been synthesized via a Michael addition reaction between primary amine terminated poly(L-leucine) and acrylate-functionalized HA (TBAHA-acrylate). The precursor hyaluronan was first functionalized with acrylate groups by reaction with acryloyl chloride in the presence of triethylamine in N,N-dimethylformamide. 1H NMR analysis of the resulting product indicated that an increase in the concentration of acryloylchoride with respect to hydroxyl groups on HA has only a moderate effect on functionalization efficiency, f. A precise control of stoichiometry was not achieved, which could be attributed to partial solubility of intermolecular aggregates and the hygroscopic nature of HA. Michael addition at high [PLeu- NH2]/[acrylate]TBAHA ratios gave a molar grafting ratio of only 0.20 with respect to the repeat unit of HA, indicating grafting limitation due to insolubility of the grafted HA-g-PLeu. Soluble HA-g-PLeu graft copolymers were obtained for low grafting ratios (<0.039) with <8.6% by mass of PLeu and were characterized thoroughly using light scattering, 1H NMR, FT-IR, and AFM techniques. Light scattering experiments showed a strong hydrophobic interaction between PLeu chains, resulting in aggregates with segregated nongrafted HA segments. This yields local networks of aggregates, as demonstrated by atomic force microscopy. Circular dichroism spectroscopy showed a -sheet conformation for aggregates of poly(L-leucine).

  16. Solvothermal synthesis and characterization of CZTS nanocrystals

    Science.gov (United States)

    Dumasiya, Ajay; Shah, N. M.

    2017-05-01

    Cu2ZnSnS4 (CZTS) is a promising thin film absorber material for low cost solar cell applications. CZTS nanoparticle ink synthesized using solvothermal route is an attractive option to deposit absorber layer using screen printing or spin coating method in CZTS thin film solar cell. In this study we have synthesized CZTS nanocrystals using solvothermal method from aqueous solution of Copper nitrate [Cu(NO3)2], Zinc nitrate [Zn(NO3)2], tin chloride [SnCl4] and thiourea with varying concentration of Cu(NO3)2 (viz 0.82 mmol,1.4 mmol, 1.7 mmol) keeping concentrations of rest of solutions constant. As synthesized CZTS nanocrystals are characterized using Energy Dispersive Analysis of X-rays (EDAX) to verify stoichiometry of elements. Analysis of EDAX data suggests that CZTS nanocrystals having Copper nitrate [Cu (NO3)2] concentration of 1.4 m mole is near stoichiometric. X-ray diffraction analysis study of CZTS nanocrystals having Copper nitrate [Cu (NO3)2] concentration of 1.4 m mole reveals the preferred orientation of the grains in (112), (220) and (312) direction confirming Kesterite structure of CZTS.

  17. A novel vanadium n-propylamino phosphate catalyst: synthesis, characterization and applications

    Directory of Open Access Journals (Sweden)

    Rajini Anumula

    2012-01-01

    Full Text Available A novel, lamellar type Vanadium n-propylamino phosphate catalyst is synthesized and characterized by using various physicochemical techniques such as Powder X-ray diffraction, Scanning electron microscopy/Energy dispersive X-ray analysis, Thermogravimetry/Differential thermal analysis, Fourier transform Infrared analysis, Electron spin resonance spectroscopy, Ultraviolet - Visible Diffuse reflectance spectroscopy, X-ray Photoelectron spectroscopy, 31P Magic angle spinning Nuclear Magnetic Resonance spectroscopy and Catalytic applications toward Octahydroquinazolinone synthesis. It is found that the n-propylamine is present as sandwich between Vanadyl phosphate layers. Most of the Vanadium is present as V4+ ions in tetrahedral co-ordination. Vanadium n-propylamino phosphate catalyses Octahydroquinazolinone synthesis more effeciently and the optimum conditions required for Octahydroquinazolinone synthesis are, Benzaldehyde (2 mmol, Dimedone (2 mmol, Urea (4 mmol, Methanol + Water (1:1, 5 mL and Catalyst (0.05 g. A plausible mechanism is also proposed.

  18. A novel vanadium n-propylamino phosphate catalyst: synthesis, characterization and applications

    Directory of Open Access Journals (Sweden)

    Rajini Anumula

    2013-02-01

    Full Text Available A novel, lamellar type Vanadium n-propylamino phosphate catalyst is synthesized and characterized by using various physicochemical techniques such as Powder X-ray diffraction, Scanning electron microscopy/Energy dispersive X-ray analysis, Thermogravimetry/Differential thermal analysis, Fourier transform Infrared analysis, Electron spin resonance spectroscopy, Ultraviolet - Visible Diffuse reflectance spectroscopy, X-ray Photoelectron spectroscopy, 31P Magic angle spinning Nuclear Magnetic Resonance spectroscopy and Catalytic applications toward Octahydroquinazolinone synthesis. It is found that the n-propylamine is present as sandwich between Vanadyl phosphate layers. Most of the Vanadium is present as V4+ ions in tetrahedral co-ordination. Vanadium n-propylamino phosphate catalyses Octahydroquinazolinone synthesis more effeciently and the optimum conditions required for Octahydroquinazolinone synthesis are, Benzaldehyde (2 mmol, Dimedone (2 mmol, Urea (4 mmol, Methanol + Water (1:1, 5 mL and Catalyst (0.05 g. A plausible mechanism is also proposed.

  19. Synthesis and characterization of polyimide silica hybrids

    International Nuclear Information System (INIS)

    Ullah, S.M.

    2010-01-01

    Flexible-chain polyimide (PIF) was synthesized from 4, 4'-oxydianiline (ODA) and pyromellitic dianhydride (PMDA) and the stiff-chain polyimide (PI S ) was derived from 1, 5-diaminonepthaline (DAN) and pyromellitic anhydride (PMDA). Molecular composites of polyimide were prepared by embedding the stiff-chain polyimide (PIS) in to ductile matrix of flexible-polyimide (PI F ) by blending their respective poly(amic acid) solution (20:80). Blend of rigid and flexible polyimide (20:80) was reinforced with silica up to 35 wt % by sol-gel process to form the silica reinforced molecular composite (SRMC). Silica reinforced molecular composite (SRMC) were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and tensile testing (TT). FTIR results showed the shifting of Si - O - Si peak toward lower wave number with the increase in the silica wt % indicates the increase in the silica particle size. The oxidative degradation of SRMC showed an improvement of 23 degree C in composite having 30 wt% silica contents. Similarly, modulus of SRMC was increased as the concentration of silica was increased. Silica reinforced (co-)polyimide (SRCO) was prepared from the same monomers DAN, ODA and PMDA (20:80:100) and reinforced with different of silica up to 35 wt%. Comparison of thermo-mechanical properties of SRMC with SRCO was also done. Both the composite showed similar peak shift to low wave number with the increase in the wt% of silica was observed as in the case of SRMC. TG results of SRCO showed the 13 degree C improvement in the oxidative degradation with 30 wt% silica content. Tensile testing shows the 80% increase in the modulus with 35 wt% silica content. The result showed that SRMC are 15 degree C more stable than SRCO with 30 wt% silica. SRMC have 15% more modulus than SRCO with 30 wt% silica. This shows that thermo mechanical stability of SRMC's over SRCO's composites. (author)

  20. Synthesis and characterization of biocompatible gold nanoparticles

    International Nuclear Information System (INIS)

    Perez-Rebolledo, Anayive; Costa, Pryscila Rodrigues da; Janeti, Milena Murucci; Ferreira, Andrea Vidal; Santos, Raquel Gouvia dos

    2010-01-01

    Nanotechnology is a broad and interdisciplinary area of research that has been an important increase in recent years. Among the various types of nanomaterials studied stand out in particular the gold nanoparticles (AuNPs) which can be applied in several fields such as biotechnology and biomedicine. The interest in development of AuNPs is due to its extraordinary physical and chemical properties resulting from the nanoscale. In this work it was developed a new process to obtain biocompatible AuNPs, whose surface was modified to allow its subsequent association to drugs with antitumor activity. Were obtained AuNPs modified with thiols, which allowed conjugation of the polymer polyethylene glycol (PEG). The results indicate the formation of AuNPs stabilized by citrate ion, with sizes ranging 5-10 nm and strong absorption at 520 nm. Nanoparticles modified with thiol and PEG showed sizes of 62 nm and 644 nm, respectively, and had easy redispersion in water. The concentration of nanoparticles in each solution was determined by neutron activation analysis. author)

  1. Carbon nanotubes: Synthesis, characterization, and applications

    Science.gov (United States)

    Deck, Christian Peter

    Carbon nanotubes (CNTs) possess exceptional material properties, making them desirable for use in a variety of applications. In this work, CNTs were grown using two distinct catalytic chemical vapor deposition (CVD) procedures, floating catalyst CVD and thermal CVD, which differed in the method of catalyst introduction. Reaction conditions were optimized to synthesize nanotubes with desired characteristics, and the effects of varying growth parameters were studied. These parameters included gas composition, temperature, reaction duration, and catalyst and substrate material. The CNT products were then examined using several approaches. For each CVD method, nanotube growth rates were determined and the formation and termination mechanisms were investigated. The effects of reaction parameters on nanotube diameters and morphology were also explored to identify means of controlling these important properties. In addition to investigating the effects of different growth parameters, the material properties of nanotubes were also studied. The floating catalyst CVD method produced thick mats of nanotubes, and the mechanical response of these samples was examined using in-situ compression and tension testing. These results indicated that mat structure is composed of discontinuous nanotubes, and a time-dependent response was also observed. In addition, the electrical resistance of bulk CNT samples was found to increase for tubes grown with higher catalyst concentrations and with bamboo morphologies. The properties of nanotubes synthesized using thermal CVD were also examined. Mechanical testing was performed using the same in-situ compression approach developed for floating catalyst CVD samples. A second characterization method was devised, where an optical approach was used to measure the deflection of patterned nanotubes exposed to an applied fluid flow. This response was also simulated, and comparisons with the experimental data were used to determine the flexural

  2. Synthesis and characterization of diblock copolymer templated iron oxide nanoparticles

    Science.gov (United States)

    Akcora, Pinar

    2005-07-01

    Templating ordered assemblies of magnetic oxide nanoparticles within self-assembled diblock copolymers of varying morphologies is an important problem with a wide applicability such as in electromagnetics, optical devices, metal catalysts, medicine and biology. In this thesis, the effects of different polymer structures on particle ordering and resultant magnetic properties have been investigated using various microstructure and magnetic characterization tools. Ring-opening metathesis polymerization (ROMP) of norbornene and functionalized norbornene monomers has been used to synthesize diblock copolymers of narrow polydispersities using Grubbs' catalyst. These block copolymers can be used as templates to form inorganic nanoparticles. In this research, the structural and physical understanding of the inorganic-copolymer system was studied by small-angle neutron and x-ray scattering techniques and transmission electron microscopy. Synthesis of gamma-Fe2O3 nanoparticles has been achieved within novel block copolymers of (norbornene)-b-(deuterated norbornene dicarboxylic) acid and (norbornene methanol-(norbornene dicarboxylic acid). The polymer morphologies were controlled by varying the volume fractions of the constituent blocks. The pure norbornene based diblock copolymer morphologies were demonstrated by electron microscopy for the first tune. Spherical, cylindrical and lamellar morphologies of these novel diblock copolymers were reported. The block ratios of the synthesized polymers were determined using gel permeation chromatography-light scattering, elemental analysis and UV-VIS spectroscopy. Solution phase doping and submersion of thin films in metal salt solutions were employed as metal doping methods and the observed nanoparticle structures were compared to those of the undoped copolymer morphologies. This project reports on the types of templating structures and dispersion of the nanoparticles. The effects of particle, interactions on the microphase

  3. SYNTHESIS AND CHARACTERIZATION OF ADVANCED MAGNETIC MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Monica Sorescu

    2004-09-22

    The work described in this grant report was focused mainly on the properties of novel magnetic intermetallics. In the first project, we synthesized several 2:17 intermetallic compounds, namely Nd{sub 2}Fe{sub 15}Si{sub 2}, Nd{sub 2}Fe{sub 15}Al{sub 2}, Nd{sub 2}Fe{sub 15}SiAl and Nd{sub 2}Fe{sub 15}SiMn, as well as several 1:12 intermetallic compounds, such as NdFe{sub 10}Si{sub 2}, NdFe{sub 10}Al{sub 2}, NdFe{sub 10}SiAl and NdFe{sub 10}MnAl. In the second project, seven compositions of Nd{sub x}Fe{sub 100-x-y}B{sub y} ribbons were prepared by a melt spinning method with Nd and B content increasing from 7.3 and 3.6 to 11 and 6, respectively. The alloys were annealed under optimized conditions to obtain a composite material consisting of the hard magnetic Nd{sub 2}Fe{sub 14}B and soft magnetic {alpha}-Fe phases, typical of a spring magnet structure. In the third project, intermetallic compounds of the type Zr{sub 1}Cr{sub 1}Fe{sub 1}T{sub 0.8} with T = Al, Co and Fe were subjected to hydrogenation. In the fourth project, we performed three crucial experiments. In the first experiment, we subjected a mixture of Fe{sub 3}O{sub 4} and Fe (80-20 wt %) to mechanochemical activation by high-energy ball milling, for time periods ranging from 0.5 to 14 hours. In the second experiment, we ball-milled Fe{sub 3}O{sub 4}:Co{sup 2+} (x = 0.1) for time intervals between 2.5 and 17.5 hours. Finally, we exposed a mixture of Fe{sub 3}O{sub 4} and Co (80-20 wt %) to mechanochemical activation for time periods ranging from 0.5 to 10 hours. In all cases, the structural and magnetic properties of the systems involved were elucidated by X-ray diffraction (XRD), Moessbauer spectroscopy and hysteresis loop measurements. The four projects resulted in four papers, which were published in Intermetallics, IEEE Transactions on Magnetics, Journal of Materials Science Letters and Materials Chemistry and Physics. The contributions reveal for the first time in literature the effect of

  4. Synthesis and Characterization of Colloidal Metal and Photovoltaic Semiconductor Nanocrystals

    KAUST Repository

    Abulikemu, Mutalifu

    2014-11-05

    Metal and semiconducting nanocrystals have received a great deal of attention from fundamental scientists and application-oriented researchers due to their physical and chemical properties, which differ from those of bulk materials. Nanocrystals are essential building blocks in the development of nanostructured devices for energy conversion. Colloidal metals and metal chalcogenides have been developed for use as nanocrystal inks to produce efficient solar cells with lower costs. All high-performing photovoltaic nanocrystals contain toxic elements, such as Pb, or scarce elements, such as In; thus, the production of solution-processable nanocrystals from earth-abundant materials using environmentally benign synthesis and processing methods has become a major challenge for the inorganic semiconductor-based solar field. This dissertation, divided into two parts, addresses several aspects of these emerging challenges. The first portion of the thesis describes the synthesis and characterization of nanocrystals of antimony sulfide, which is composed of non-scarce and non-toxic elements, and examines their performance in photovoltaic devices. The effect of various synthetic parameters on the final morphology is explored. The structural, optical and morphological properties of the nanocrystals were investigated, and Sb2S3 nanocrystal-based solid-state semiconductor-sensitized solar cells were fabricated using different deposition processes. We achieved promising power conversion efficiencies of 1.48%. The second part of the thesis demonstrates a novel method for the in situ synthesis and patterning of nanocrystals via reactive inkjet printing. The use of low-cost manufacturing approaches for the synthesis of nanocrystals is critical for many applications, including photonics and electronics. In this work, a simple, low-cost method for the synthesis of nanocrystals with minimum size variation and waste using reactive inkjet printing is introduced. As a proof of concept, the

  5. Nanoscale Synthesis and Characterization Laboratory Annual Report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, A V

    2008-04-07

    The Nanoscale Synthesis and Characterization Laboratory's (NSCL) primary mission is to create and advance interdisciplinary research and development opportunities in nanoscience and technology. The NSCL is delivering on its mission providing Laboratory programs with scientific solutions through the use of nanoscale synthesis and characterization. While this annual report summarizes 2007 activities, we have focused on nanoporous materials, advanced high strength, nanostructured metals, novel 3-dimensional lithography and characterization at the nanoscale for the past 3 years. In these three years we have synthesized the first monolithic nanoporous metal foams with less than 10% relative density; we have produced ultrasmooth nanocrystalline diamond inertial confinement fusion capsules; we have synthesized 3-dimensional graded density structures from full density to 5% relative density using nanolithography; and we have established ultrasmall angle x-ray scattering as a non-destructive tool to determine the structure on the sub 300nm scale. The NSCL also has a mission to recruit and to train personnel for Lab programs. The NSCL continues to attract talented scientists to the Laboratory. Andrew Detor from Massachusetts Institute of Technology, Sutapa Ghosal from the University of California, Irvine, Xiang Ying Wang from Shanghai Institute of Technology, and Arne Wittstock from University of Bremen joined the NSCL this year. The NSCL is pursuing four science and technology themes: nanoporous materials, advanced nanocrystalline materials, novel three-dimensional nanofabrication technologies, and nondestructive characterization at the mesoscale. The NSCL is also pursuing building new facilities for science and technology such as nanorobotics and atomic layer deposition.

  6. Lanthanide phosphonates: Synthesis, thermal stability and magnetic characterization

    Energy Technology Data Exchange (ETDEWEB)

    Amghouz, Z., E-mail: amghouz.uo@uniovi.es [Departamentos de Quimica Fisica y Analitica y Quimica Organica e Inorganica, Universidad de Oviedo - CINN, 33006 Oviedo (Spain); Garcia, J.R.; Garcia-Granda, S. [Departamentos de Quimica Fisica y Analitica y Quimica Organica e Inorganica, Universidad de Oviedo - CINN, 33006 Oviedo (Spain); Clearfield, A. [Department of Chemistry, Texas A and M University, College Station, TX 77842-3012 (United States); Rodriguez Fernandez, J.; Pedro, I. de [CITIMAC, Facultad de Ciencias, Universidad de Cantabria, 39005 Santander (Spain); Blanco, J.A. [Departamento de Fisica, Universidad de Oviedo, 33007 Oviedo (Spain)

    2012-09-25

    Highlights: Black-Right-Pointing-Pointer Report of the complete series of lanthanide 1,4-phenylbis(phosphonate). Black-Right-Pointing-Pointer Synthesis under conventional hydrothermal synthesis or microwave-assisted hydrothermal synthesis. Black-Right-Pointing-Pointer Cation size is the key factor for the structural and particles size variations. Black-Right-Pointing-Pointer Thermal behaviour is characterized by unusual very high thermal stability. - Abstract: Series of novel organic-inorganic hybrids materials based on trivalent lanthanides (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) and 1,4-phenylbis(phosphonate) obtained under hydrothermal conditions either by oven heat or microwave irradiation. The anhydrous compounds containing La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, and Ho, are isostructural. However, the compounds based on Y, Er, Tm, Yb, and Lu are hydrated and their structures have not yet been solved. The series of compounds are characterized by PXRD, TEM, SEM-EDX and thermal analyses (TG-MS and DSC). TEM study show a variable particles size with a minimum mean-particle size of ca. 30 nm. These compounds exhibit unusual very high thermal stability. The size of particles and the thermal stability are depending on lanthanide(III) cation features. All the investigated materials show paramagnetic behaviour. The magnetic susceptibility data follow a Curie-Weiss laws with paramagnetic effective moments in good agreement with those expected for Ln{sup 3+} free ions.

  7. Oxidative synthesis of a novel polyphenol having pendant Schiff base group: Synthesis, characterization, non-isothermal decomposition kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Dilek, Deniz [Faculty of Education, Secondary Science and Mathematics Education, Canakkale Onsekiz Mart University, 17100 Canakkale (Turkey); Dogan, Fatih, E-mail: fatihdogan@comu.edu.tr [Faculty of Education, Secondary Science and Mathematics Education, Canakkale Onsekiz Mart University, 17100 Canakkale (Turkey); Bilici, Ali, E-mail: alibilici66@hotmail.com [Control Laboratory of Agricultural and Forestry Ministry, 34153 Istanbul (Turkey); Kaya, Ismet [Department of Chemistry, Faculty of Science and Arts, Canakkale Onsekiz Mart University, Canakkale (Turkey)

    2011-05-10

    Research highlights: {yields} In this study, the synthesis and thermal characterization of a new functional polyphenol are reported. {yields} Non-isothermal methods were used to evaluate the thermal decomposition kinetics of resulting polymer. {yields} Thermal decomposition of polymer follows a diffusion type kinetic model. {yields} It is noted that this kinetic model is quite rare in polymer degradation studies. - Abstract: In here, the facile synthesis and thermal characterization of a novel polyphenol containing Schiff base pendant group, poly(4-{l_brace}[(4-hydroxyphenyl)imino]methyl{r_brace}benzene-1,2,3-triol) [PHPIMB], are reported. UV-vis, FT-IR, {sup 1}H NMR, {sup 13}C NMR, GPC, TG/DTG-DTA, CV (cyclic voltammetry) and solid state conductivity measurements were utilized to characterize the obtained monomer and polymer. The spectral analyses results showed that PHPIMB was composed of polyphenol main chains containing Schiff base pendant side groups. Thermal properties of the polymer were investigated by thermogravimetric analyses under a nitrogen atmosphere. Five methods were used to study the thermal decomposition of PHPIMB at different heating rate and the results obtained by using all the kinetic methods were compared with each other. The thermal decomposition of PHPIMB was found to be a simple process composed of three stages. These investigated methods were those of Flynn-Wall-Ozawa (FWO), Tang, Kissinger-Akahira-Sunose (KAS), Friedman and Kissinger methods.

  8. Synthesis and Characterization of LaTiO2N

    Science.gov (United States)

    Rugen, Evan E.

    Photocatalysts offer an excellent opportunity to shift the global energy landscape from a fossil fuel-dependent paradigm to sustainable and carbon-neutral solar fuels. Oxynitride materials such as LaTiO2N are potential photocatalysts for the water splitting reaction due to their high oxidative stability and their narrow band gaps, which are suitable for visible light absorption. However, facile synthetic routes to metal oxynitrides with controlled morphologies are rare, and the local structures of these materials are under-characterized. Ultrasonic spray synthesis (USS) offers a facile method toward complex metal oxides which can potentially be converted to oxynitrides with preservation of the microsphere structures that typify the products from such aerosol routes. Here, La-Ti-O microspheres were facilely produced by USS and converted by ammonolysis to LaTiO2N microspheres with porous shells and hollow interiors. This particle architecture is accounted for by coupling suitable combustion chemistry with the aerosol technique, producing precursor particles where the La3+ and Ti4+ are well-mixed at small length scales; this feature enables preservation of the microsphere morphology during nitridation despite the crystallographic changes that occur. The LaTiO2N microspheres are comparable oxygen evolving photocatalysts to samples produced by conventional solid state methods. Pair distribution function (PDF) analysis is a local probe designed to examine the structure of disordered crystalline materials, and is an ideal technique for characterizing the ordering of anions in oxynitrides. Preliminary studies using PDF analysis to determine the presence of anion ordering and local structure in LaTiO2N produced by solid state methods are presented here. Future experiments are proposed that will grant detailed insight into the factors driving the degree of anion ordering in these types of materials. These results demonstrate the utility of USS as a facile, potentially

  9. Synthesis and characterization of poly aniline for electrochemical biosensor construction

    International Nuclear Information System (INIS)

    Magalhaes, Gleice S.L.; Southgate, Erica F.; Alhadeff, Eliana M.; Guimaraes, Maria Jose O.C.

    2011-01-01

    Conductors polymers have many attractive interests to the industry due their highly technological applications. This work treats specially of polyaniline because it's large electrical conductivity, electrochemical properties, associate to the chemical stability in environmental conditions and synthesis facility. The main of this work is the application in a construction of an electrochemical biosensor for ethanol detection and quantification. Different conditions of synthesis of the conductor emeraldine polyaniline form were studied, investigated the influence of the dopant agent and the reactional environment conditions temperature on the reaction yield and conductivities. The polyaniline that showed the best conductivity were characterized by differential and thermal gravimetric analysis, infrared spectroscopy, X ray diffraction, and cycle voltammetry, comparing with the commercial polyaniline. (author)

  10. Characterization of sialon-type materials

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, Paul Newman [Univ. of California, Berkeley, CA (United States)

    1977-06-01

    Four sialon-type materials using volcanic ash as a raw material were characterized and some of their properties were determined. The M3 and M4 materials were identified as β1--Si3N4 sialons; their principal constituent is silicon. The M2 material was identified as a 15R-A1N polytype sialon whose principal constituent is aluminum. The M1 material is a mixture of the two types. An overview of results showing the general structural formulae and the relative order of the materials with respect to various properties as determined by the investigation is presented. It is concluded that of the materials tested, the M2 material shows the most promise as a candidate for meeting some of the current needs for high-temperature materials. It is also concluded that more research is needed in order to explain the low resistance of these materials to thermal shock since their coefficients of thermal expansion are relatively low.

  11. Synthesis and characterization of heterobimetallic complexes of the type [Cu(pn2][MCl4] where M = Co(II, Ni(II, Cu(II, Zn(II, Cd(II, and Hg(II

    Directory of Open Access Journals (Sweden)

    Seema Yadav

    2016-11-01

    Full Text Available A series of new bimetallic transition metal complexes of the type [Cu(pn2] [MCl4] have been synthesized (where M = Co(II, Ni(II, Cu(II, Zn(II, Cd(II and Hg(II, pn = 1,3-diaminopropane and characterized by elemental analysis, molar conductance, TGA, IR and electronic spectra. All the compounds are 1:1 electrolyte in DMF. The Cu(II ion is square-planar while metal ions in the anionic moiety acquire their usual tetrahedral arrangement. On the basis of these studies it is concluded that anionic moiety is electrically stabilized by its cationic counterpart.

  12. Progress towards discovery of antifibrotic drugs targeting synthesis of type I collagen

    KAUST Repository

    Fritz, Dillon Jeffery

    2011-08-01

    Type I collagen is the most abundant protein in human body. Fibrosis is characterized by excessive synthesis of type I collagen in parenchymal organs. It is a leading cause of morbidity and mortality worldwide, about 45% of all natural deaths are attributable to some fibroproliferative disease. There is no cure for fibrosis. To find specific antifibrotic therapy targeting type I collagen, critical molecular interactions regulating its synthesis must be elucidated. Type I and type III collagen mRNAs have a unique sequence element at the 5\\' end, the 5\\' stem-loop. This stem-loop is not found in any other mRNA. We cloned LARP6 as the protein which binds collagen 5\\' stem-loop with high affinity and specificity. Mutation of the 5\\' stem-loop or knock down of LARP6 greatly diminishes collagen expression. Mice with mutation of the 5\\' stem-loop are resistant to development of liver fibrosis. LARP6 associates collagen mRNAs with filaments composed of nonmuscle myosin; disruption of these filaments abolishes synthesis of type I collagen. Thus, LARP6 dependent collagen synthesis is the specific mechanism of high collagen expression seen in fibrosis. We developed fluorescence polarization (FP) method to screen for drugs that can inhibit binding of LARP6 to 5\\' stem-loop RNA. FP is high when LARP6 is bound, but decreases to low levels when the binding is competed out. Thus, by measuring decrease in FP it is possible to identify chemical compounds that can dissociate LARP6 from the 5\\' stem-loop. The method is simple, fast and suitable for high throughput screening. © 2011 Bentham Science Publishers Ltd.

  13. Electrochemical synthesis and characterization of zinc oxalate nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Shamsipur, Mojtaba, E-mail: mshamsipur@yahoo.com [Department of Chemistry, Razi University, Kermanshah (Iran, Islamic Republic of); Roushani, Mahmoud [Department of Chemistry, Razi University, Kermanshah (Iran, Islamic Republic of); Department of Chemistry, Ilam University, Ilam (Iran, Islamic Republic of); Pourmortazavi, Seied Mahdi [Faculty of Material and Manufacturing Technologies, Malek Ashtar University of Technology, Tehran (Iran, Islamic Republic of)

    2013-03-15

    Highlights: ► Synthesis of zinc oxalate nanoparticles via electrolysis of a zinc plate anode in sodium oxalate solutions. ► Design of a Taguchi orthogonal array to identify the optimal experimental conditions. ► Controlling the size and shape of particles via applied voltage and oxalate concentration. ► Characterization of zinc oxalate nanoparticles by SEM, UV–vis, FT-IR and TG–DTA. - Abstract: A rapid, clean and simple electrodeposition method was designed for the synthesis of zinc oxalate nanoparticles. Zinc oxalate nanoparticles in different size and shapes were electrodeposited by electrolysis of a zinc plate anode in sodium oxalate aqueous solutions. It was found that the size and shape of the product could be tuned by electrolysis voltage, oxalate ion concentration, and stirring rate of electrolyte solution. A Taguchi orthogonal array design was designed to identify the optimal experimental conditions. The morphological characterization of the product was carried out by scanning electron microscopy. UV–vis and FT-IR spectroscopies were also used to characterize the electrodeposited nanoparticles. The TG–DTA studies of the nanoparticles indicated that the main thermal degradation occurs in two steps over a temperature range of 350–430 °C. In contrast to the existing methods, the present study describes a process which can be easily scaled up for the production of nano-sized zinc oxalate powder.

  14. The Kagomé topology of the gallium and indium metal-organic framework types with a MIL-68 structure: synthesis, XRD, solid-state NMR characterizations, and hydrogen adsorption.

    Science.gov (United States)

    Volkringer, Christophe; Meddouri, Mohamed; Loiseau, Thierry; Guillou, Nathalie; Marrot, Jérôme; Férey, Gérard; Haouas, Mohamed; Taulelle, Francis; Audebrand, Nathalie; Latroche, Michel

    2008-12-15

    The vanadium-based terephthalate analogs of MIL-68 have been obtained with gallium and indium (network composition: M(OH)(O(2)C-C(6)H(4)-CO(2)), M = Ga or In) by using a solvothermal synthesis technique using N,N-dimethylformamide as a solvent (10 and 48 h, for Ga and In, respectively, at 100 degrees C). They have been characterized by X-ray diffraction analysis; vibrational spectroscopy; and solid-state (1)H and (1)H-(1)H radio-frequency-driven dipolar recoupling (RFDR), (1)H-(1)H double quantum correlation (DQ), and (13)C{(1)H} cross polarization magic angle spinning (CPMAS) NMR spectroscopy. The three-dimensional network with a Kagomé-like lattice is built up from the connection of infinite trans-connected chains of octahedral units MO(4)(OH)(2) (M = Ga or In), linked to each other through the terephthalate ligands in order to generate triangular and hexagonal one-dimensional channels. The presence of DMF molecules with strong interactions within the channels as well as their departure upon calcination (150 degrees C under a primary vacuum) of the materials has been confirmed by subjecting MIL-68 (Ga) to solid-state (1)H MAS NMR. The (1)H-(1)H RFDR and (1)H-(1)H DQ spectra revealed important information on the spatial arrangement of the guest species with respect to the hybrid organic-inorganic network. (13)C{(1)H} CPMAS NMR of activated samples provided crystallographically independent sites in agreement with X-ray diffraction structure determination. Brunauer-Emmett-Teller surface areas are 1117(24) and 746(31) m(2) g(-1) for MIL-98 (Ga) and MIL-68 (In), respectively. Hydrogen adsorption isotherms have been measured at 77 K, and the storage capacities are found to be 2.46 and 1.98 wt % under a saturated pressure of 4 MPa for MIL-68 (Ga) and MIL-68 (In), respectively. For comparison, the hydrogen uptake for the aluminum trimesate MIL-110, which has an open framework with 16 A channels, is 3 wt % under 4 MPa.

  15. Synthesis and characterization of the polyaniline dopant Schiff base

    Directory of Open Access Journals (Sweden)

    Mirian Y. Matsumoto

    2012-06-01

    Full Text Available The Schiff base, N-salicilidenoanilina was used as dopant to induce polymerization of aniline and thus preparing polyaniline (PAni. The different conditions of preparation, including Schiff base structure, and the dosage of acidity reaction medium, were investigated to discuss the influence of these conditions relative conductivity of the resulting samples. The products were also characterized by Fourier transform infrared (FTIR, ultraviolet-visible (UV-Vis, electrochemical impedance spectroscopy (EIE. The results showed the synthesis conditions play an important in the formation and the final properties of the polyaniline

  16. Boronate esters: Synthesis, characterization and molecular base receptor analysis

    Science.gov (United States)

    Gómez-Jaimes, Gelen; Barba, Victor

    2014-10-01

    The synthesis of three boronate esters obtained by reacting 4-fluorophenylboronic (1), 4-iodophenylboronic (2) and 3,4-chlorophenylboronic (3) acids with 2,4,5-trihidroxybenzaldehyde is reported. The structural characterization was determined by spectroscopic and spectrometric techniques. The boron atom was evaluated to acts as Lewis acid center in the reaction with pyridine (Py), triethylamine (TEA) and fluoride anion (F-). The titration method was followed by UV-Vis and 11B NMR spectroscopy; results indicate the good interaction with the fluoride ion but poor coordination towards pyridine in solution.

  17. Synthesis and Biophysical Characterization of Chlorambucil Anticancer Ether Lipid Prodrugs

    DEFF Research Database (Denmark)

    Pedersen, Palle Jacob; Christensen, Mikkel Stochkendahl; Ruysschaert, Tristan

    2009-01-01

    The synthesis and biophysical characterization of four prodrug ether phospholipid conjugates are described. The lipids are prepared from the anticancer drug chlorambucil and have C16 and C18 ether chains with phosphatidylcholine or phosphatidylglycerol headgroups. All four prodrugs have the ability...... to form unilamellar liposomes (86-125 nm) and are hydrolyzed by phospholipase A2, resulting in chlorambucil release. Liposomal formulations of prodrug lipids displayed cytotoxicity toward HT-29, MT-3, and ES-2 cancer cell lines in the presence of phospholipase A2, with IC50 values in the 8-36 μM range....

  18. Synthesis and Characterization of Biscoumarin and Benzopyrano Dicoumarin Derivatives

    International Nuclear Information System (INIS)

    Nik Khairunissa' Nik Abdullah Zawawi; Muhammad Taha; Norizan Ahmat; Nor Hadiani Ismail; Nik Khairunissa' Nik Abdullah Zawawi; Muhammad Taha; Norizan Ahmat; Nor Hadiani Ismail

    2016-01-01

    The wide-ranging biological activities of 4-hydroxycoumarin have stimulated considerable interest in this class of compounds, and various biscoumarin derivatives have been synthesized. Recently, a number of methods have been reported for the synthesis of biscoumarin by the reaction of 4-hydroxycoumarin and various aldehydes in the presence of catalysts. In the present study, a new series of biscoumarin and benzopyrano dicoumarin were synthesized and physically characterized by nuclear magnetic resonane ( 1 H and 13 C NMR), fourier transform infrared spectroscopy (FTIR), mass spectrometry (MS) and melting point. (author)

  19. Controllable synthesis and characterization of alumina/MWNT nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Nemeth, Zoltan; Hernadi, Klara [Department of Applied and Environmental Chemistry, University of Szeged, Rerrich Bela ter 1, 6720 Szeged (Hungary); Marko, Kata; Erdohelyi, Andras [Department of Physical Chemistry and Material Science, University of Szeged, Aradi ter 2, 6720 Szeged (Hungary); Forro, Laszlo [Laboratory of Physics of Complex Matter, IPMC, EPFL, 1026 Ecublens (Switzerland)

    2011-11-15

    The aim of this work is to develop a controllable synthesis pathway which produces a stable alumina layer on the surface of carbon nanotubes by impregnation method. Precursor compounds such as aluminium isopropoxide and aluminium-acetyl-acetonate were used to cover the surface of multiwalled carbon nanotubes (MWNTs) under different solvent conditions. As-prepared alumina coverages were characterized by TEM, SEM, SEM-EDX, TG and X-ray diffraction techniques. Results revealed that homogeneous coverage can be achieved in a controllable way. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Synthesis and characterization of cobalt sulfide nanoparticles by sonochemical method

    Science.gov (United States)

    Muradov, Mustafa B.; Balayeva, Ofeliya O.; Azizov, Abdulsaid A.; Maharramov, Abel M.; Qahramanli, Lala R.; Eyvazova, Goncha M.; Aghamaliyev, Zohrab A.

    2018-03-01

    Convenient and environmentally friendly synthesis of Co9S8/PVA, CoxSy/EG and CoxSy/3-MPA nanocomposites were carried out in the presence of ultrasonic irradiation by the liquid phase synthesis of the sonochemical method. For the synthesis, cobalt acetate tetrahydrate [Co(CH3COO)2·4H2O] and sodium sulfide (Na2S·9H2O) were used as a cobalt and sulfur precursor, respectively. Polyvinyl alcohol (PVA), ethylene glycol (EG) and 3-mercaptopropionic acid (3-MPA) were used as a capping agent and surfactant. The structural, optical properties and morphology of nanocomposites were characterized using X-ray diffractometer (XRD), Ultraviolet/Visible Spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The optical band gap of Co9S8/PVA is 1.81 eV and for CoxSy/EG is 2.42 eV, where the direct band gap of bulk cobalt sulfide is (0.78-0.9 eV). The wide band gap indicates that synthesised nanocomposites can be used in the fabrication of optical and photonic devices. The growth mechanisms of the Co9S8, CoS2 and Co3S4 nanoparticles were discussed by the reactions. The effects of sonication time and annealing temperature on the properties of the nanoparticles have been studied in detail.

  1. Materials Research Society Symposium Proceedings Volume 635. Anisotropic Nanoparticles - Synthesis, Characterization and Applications

    National Research Council Canada - National Science Library

    Lyon, L

    2000-01-01

    This volume contains a series of papers originally presented at Symposium C, "Anisotropic Nanoparticles Synthesis, Characterization and Applications," at the 2000 MRS Fall Meeting in Boston, Massachusetts...

  2. Electrochemical synthesis and characterization of copper (I oxide

    Directory of Open Access Journals (Sweden)

    Bugarinović Sanja J.

    2009-01-01

    Full Text Available The quest and need for clean and economical energy sources have increased interest in the development of thin film cells technologies. Electrochemical deposition is an attractive method for synthesis of thin films. It offers the advantages of low synthesis temperature, low cost and high purity. Copper (I oxide or cuprous oxide is an oxide semiconductor which is used as the anodic material in the form of thin film in lithium batteries and solar cells. The cathodic process of synthesis of cuprous oxide thin film is carried out in a potentiostatic mode from the organic electrolyte. The process parameters are chosen in that way to accomplish maximum difference between the potentials at which Cu2O and CuO are obtained. The electrochemical characterization was carried out by cyclic voltammetry. The electrodeposition techniques are particularly well suited for the deposition of single elements but it is also possible to carry out simultaneous depositions of several elements and syntheses of well-defined alternating layers of metals and oxides with thicknesses down to a few nm. Nanomaterials exhibit novel physical properties and play an important role in fundamental research. In addition, cuprous oxide is commonly used as a pigment, a fungicide, and an antifouling agent for marine paints. It is insoluble in water and organic solvents. This work presents the examinations of the influence of bath, temperature, pH and current density on the characteristics of electrochemically synthesized cuprous oxide. In the 'classic' process of synthesis, which is carried out under galvanostatic conditions on the anode, the grain size of the powder decreases with the increase in current density while the grain colour becomes lighter. The best commercial quality of the Cu2O (grain size, colour, content of choride was obtained at the temperature of 80°C, concentration of NaCl of 3 mol/dm3 and current density of 400 A/m2.

  3. Synthesis and characterization of acidic mesoporous borosilicate thin films.

    Science.gov (United States)

    Xiu, Tongping; Liu, Qian; Wang, Jiacheng

    2009-02-01

    Work on the synthesis and characterization of acidic wormhole-like ordered mesoporous borosilicate thin films (MBSTFs) on silicon wafers is described in this paper. The MBSTFs coated by the dip-coating method were prepared through an evaporation-induced self-assembly (EISA) process using nonionic block copolymers as structure-directing agents. Fourier transform infrared (FT-IR) spectroscopy confirmed the formation of borosiloxane bonds (Si-O-B). High-resolution transmission electron microscopy (HRTEM) and N2 sorption evidenced a wormhole-like mesoporous structure in the MBSTFs obtained. Scanning electron microscopy (SEM) images of the cross sections and surfaces of the samples showed that MBSTFs on silicon wafers were continuous, homogeneous and did not crack. The acidic properties of the MBSTFs were characterized by FT-IR spectra of chemisorbed pyridine. The MBSTFs thus prepared may find their future applications in many fields including chemical sensors, catalysis, optical coating, molecule separation, etc.

  4. Uranium and thorium based phosphate matrix: synthesis, characterizations and lixiviation

    International Nuclear Information System (INIS)

    Dacheux, N.

    1995-03-01

    In the framework of the search for a ceramic material usable in the radioactive waste storage, uranium and thorium phosphates have been investigated. Their experimental synthesis conditions have been entirely reviewed, they lead to the preparation of four new compounds: U(UO 2 )(PO 4 ) 2 , U 2 O(PO 4 ) 2 , UCIPO 4 , 4H 2 O, and Th 4 (PO 4 ) 4 P 2 O 7 . Experimental evidenced are advanced for non existent compounds such as: U 3 (PO 4 ) 4 , U 2 O 3 P 2 O 7 and Th 3 (PO 4 ) 4 . Characterization by several techniques (X-rays and neutron powder diffractions, UV-Visible and Infra-red spectroscopies, XPS,...) were performed. The ab initio structure determination of U(UO 2 )(PO 4 ) 2 has been achieved by X-rays and refined by neutron diffractions. Through its physico-chemical analysis, we found that this compound was a new mixed valence uranium phosphate in which U 4+ and UO 2 2+ ions are ordered in pairs along parallel chains according to a new type of arrangement. Reaction mechanism, starting from UCIPO 4 , 4H 2 O and based on redox processes of uranium in solid state was set up. From two main matrices U(UO 2 )(PO 4 ) 2 and Th 4 (PO 4 ) 4 P 2 O 7 , solid solutions were studied. They consist of replacement of U(IV) by Th(IV) and reversely. The leaching tests on pure, loaded and doped matrices were performed in terms of storage time, pH of solutions, and determined by the use of solids labelled with 230 U or by the measurement of uranyl concentration by Laser-Induced Time-Resolved Spectro-fluorimetry. Average concentration of uranium in the liquid phase is around 10 -4 M to 10 -6 M. Taking into account the very low solubilities of the studied phosphate ceramics, we estimated their chemical performances promising as an answer to the important nuclear waste problem, if we compare them to the glasses used at the present time. (author)

  5. Synthesis and characterization of iron nano particles for the arsenic removal in water

    International Nuclear Information System (INIS)

    Gutierrez M, O. E.

    2011-01-01

    The synthesis of iron nanoparticles for the removal of metallic ions in polluted waters has been during the last years study topic for different world organizations. This work presents a synthesis method of conditioned coal with iron nanoparticles starting from the use of leaves of pineapple crown, with the purpose of using it in arsenic removal processes in aqueous phase. For the synthesis of this material, the leaves of the pineapple crown were used like supports structure of the iron nanoparticles. First, the pyrolysis appropriate temperature was determined. For the preparation of the support material, this had contact with a ferric nitrate and hexamine solution, because the preparation of the material and the coal synthesis were realized during the pyrolysis process, where the hexamine molecules and the ferric nitrate react, causing the reduction of the iron particles and their dispersion on the support material, obtaining as product a conditioned coal with iron nanoparticles. For the characterization of the materials were used techniques as: Scanning electron microscopy, Transmission electron microscopy, X-Rays Diffraction), X-Ray photoelectron spectroscopy and Moessbauer spectroscopy; moreover was determined the isoelectric point and the density of surface sites. The arsenic sorption capacity of the materials was evaluated by means of the methodology type lots where was determined the sorption kinetics and isotherms in terms of arsenic concentration and mass. (Author)

  6. Synthesis and characterization of related substances and metabolite of tadalafil, a PDE-5 inhibitor

    Directory of Open Access Journals (Sweden)

    Goverdhan Gilla

    2013-03-01

    Full Text Available Tadalafil (Cialis is a potent and selective inhibitor of cyclic guanosine monophosphate (cGMP-specific phosphodiesterase type-5 (PDE-5 and it is administered orally for the treatment of erectile dysfunction (ED. Two synthetic schemes were evaluated to study the impurity profile of tadalafil. Six impurities were detected in the bulk substance (prepared by two methods at a level of 0.1-0.15%. Identification, synthesis, characterization of impurities (related substances and metabolite and origin of their formation is described .

  7. Selective synthesis and characterization of chlorins as sensitizers for photodynamic therapy

    Science.gov (United States)

    Montforts, Franz-Peter; Kusch, Dirk; Hoper, Frank; Braun, Stefan; Gerlach, Benjamin; Brauer, Hans-Dieter; Schermann, Guido; Moser, Joerg G.

    1996-04-01

    Chlorin type sensitizers have ideal photophysical properties for an application in PDT. The basic chlorin framework of these sensitizers has to be modified by attachment of lipophilic and hydrophilic residues to achieve a good cell uptake and tumor enrichment. In the present study we describe the selective synthesis of amphiphilic chlorins starting from the readily accessible red blood pigment heme. The photophysical properties of the well defined synthetic chlorins are characterized by photophysical investigations. The kinetic of cell uptake, the localization in the cell and the photodynamic behavior of the amphiphilic sensitizers are demonstrated by incubation of A 375 cancer cell lines with structurally different chlorins.

  8. Synthesis, characterization and behaviour of trans-bis (argininate) copper (II) to gamma radiation

    International Nuclear Information System (INIS)

    Pereira, A.B.

    1984-01-01

    The synthesis, the characterization and the behaviour to gamma radiation of trans-bis (argininate) copper (II) are presented. The synthesis is made from copper sulfate, sodium hydroxide and hydrochloride of L (+) arginine, in aqueous medium, and the characterization by infrared spectroscopy, visible and ultraviolet spectroscopy and elementary analysis. (C.G.C.)

  9. Model Ziegler-type hydrogenation catalyst precursors, [(1,5-COD)M(mu-O2C8H15)]2 (M = Ir and Rh): synthesis, characterization, and demonstration of catalytic activity en route to identifying the true industrial hydrogenation catalysts.

    Science.gov (United States)

    Alley, William M; Girard, Chase W; Ozkar, Saim; Finke, Richard G

    2009-02-02

    The compounds [(1,5-COD)M(mu-O2C8H15)]2 (COD = cyclooctadiene, M = Ir (1) or Rh (2), O2C8H15 = 2-ethylhexanoate) were synthesized by addition of Bu3NH(2-ethylhexanoate) or Na(2-ethylhexanoate) to acetone suspensions of [(1,5-COD)Ir(mu-Cl)]2 or [(1,5-COD)Rh(mu-Cl)]2, respectively. The synthesis of such well-defined second and third row model precursors is key to determining the true nature of commercial Ziegler-type hydrogenation catalysts (i.e., catalysts made from the combination of a non-zerovalent, group 8-10 transition metal precatalyst and a trialkylaluminum cocatalyst), an unsolved, approximately 40 year old problem. The characterizations of 1 and 2 were accomplished by elemental analysis, melting point, FAB-MS, FT-IR, UV-vis, NMR spectroscopy, and single crystal X-ray diffraction. The complexes, C32H54Ir2O4 and C32H54O4Rh2, are isostructural: monoclinic, P2(1)/n, Z = 4. The lattice constants for 1 are a = 15.7748(5) A, b = 9.8962(3) A, c = 20.8847(7) A, beta = 108.408(2) degrees. The lattice constants for 2 are a = 15.7608(4) A, b = 9.9032(3) A, c = 20.8259(5) A, beta = 108.527(1) degrees. Complexes 1 and 2 are dimeric, bridged by the 2-ethylhexanoates, and with one 1,5-COD ligand bound to each metal. The formally 16 electron metal atoms are in square ligand planes with dihedral angles between the planes of 56.5 degrees for 1 and 58.1 degrees for 2. The M-M distances of 3.2776(2) and 3.3390(4) A for 1 and 2, respectively, fall in the range of similar structures thought to have some M-M interaction despite the lack of a formal M-M bond. Demonstration that active Ziegler-type hydrogenation catalysts are made when 1 or 2 combine with AlEt3 is provided, results that open the door to the use of 1 and 2 as well-defined third and second row congeners, respectively, of Ziegler-type hydrogenation catalysts. These compounds have proven important in addressing the previously unsolved problem of the true nature of the catalyst in industrial Ziegler-type hydrogenation

  10. The synthesis and characterization of biotin-silver-dendrimer nanocomposites as novel bioselective labels

    Science.gov (United States)

    Malý, J.; Lampová, H.; Semerádtová, A.; Štofik, M.; Kováčik, L.

    2009-09-01

    This paper presents a synthesis of a novel nanoparticle label with selective biorecognition properties based on a biotinylated silver-dendrimer nanocomposite (AgDNC). Two types of labels, a biotin-AgDNC (bio-AgDNC) and a biotinylated AgDNC with a poly(ethylene)glycol spacer (bio-PEG-AgDNC), were synthesized from a generation 7 (G7) hydroxyl-terminated ethylenediamine-core-type (2-carbon core) PAMAM dendrimer (DDM) by an N,N'-dicyclohexylcarbodiimide (DDC) biotin coupling and a NaBH4 silver reduction method. Synthesized conjugates were characterized by several analytical methods, such as UV-vis, FTIR, AFM, TEM, ELISA, HABA assay and SPR. The results show that stable biotinylated nanocomposites can be formed either with internalized silver nanoparticles (AgNPs) in a DMM polymer backbone ('type I') or as externally protected ('type E'), depending on the molar ratio of the silver/DMM conjugate and type of conjugate. Furthermore, the selective biorecognition function of the biotin is not affected by the AgNPs' synthesis step, which allows a potential application of silver nanocomposite conjugates as biospecific labels in various bioanalytical assays, or potentially as fluorescence cell biomarkers. An exploitation of the presented label in the development of electrochemical immunosensors is anticipated.

  11. New hydrazones of ferulic acid: synthesis, characterization and biological activity.

    Science.gov (United States)

    Wolszleger, Maria; Stan, Cătălina Daniela; Apotrosoaei, Maria; Vasincu, Ioana; Pânzariu, Andreea; Profire, Lenuţa

    2014-01-01

    The ferulic acid (4-hydroxy-3-methoxy-cinnamic acid) is a phenolic compound with important antioxidant effects and which nowadays is being extensively studied for his potential indications in inflammatory and neurodegenerative diseases, hypertension, atherosclerosis, etc. The synthesis of new ferulic acid compounds with potential antioxidant activity. The synthesis of the designed compounds was performed in several steps: (i) the obtaining of ferulic acid chloride by reacting of ferulic acid with thionyl chloride; (ii) the reaction between the ferulic acid chloride and hydrazine hydrate 98% to obtain the ferulic acid hydrazide; (iii) the condensation of ferrulic acid hydrazide with various benzaldehydes (2-hydroxy/3-hydroxy/4-hydroxy/2-nitro/3-nitro/4-nitro/2-methoxi/ 4-chloro/4-fluoro/4-bromo-benzaldehyde) resulting the correspond- ing hydrazones. The structure of the synthesized compounds was confirmed by FT-IR spectroscopy and the evaluation of antioxidant potential was achieved by determining the total antioxidant capacity and reducing power. In this study new hydrazones of ferulic acid have been synthesized, physic-chemical and spectral characterized. The evaluation of antioxidant potential using in vitro methods showed the favorable influence of the structural modulation on the antioxidant effects of ferulic acid.

  12. Synthesis and characterization of related substances of Azilsartan Kamedoxomil

    Directory of Open Access Journals (Sweden)

    Maddi N. V. D. Harikiran

    2017-03-01

    Full Text Available Azilsartan Kamedoxomil is an AT1-subtype angiotensin II receptor blocker (ARB. During the laboratory synthesis of Azilsartan Kamedoxomil, four related substances of Azilsartan Kamedoxomil were observed and identified. These were 2-Ethoxy-3-[[4-[2- [4-[(5-methyl-2-oxo-1,3-dioxol-4-ylmethyl]-5-oxo-1,2,4-oxadiazol-3-yl]phenyl]phenyl] methyl] benzimidazole-4-carboxylic acid (azilsartan N-medoxomil, 9, (5-methyl-2-oxo- 1,3-dioxol-4-ylmethyl 2-ethoxy-3-[[4-[2-[4-[(5-methyl-2-oxo-1,3-dioxol-4-ylmethyl]-5- oxo-1,2,4-oxadiazol-3-yl]phenyl]phenyl] methyl] benzimidazole-4-carboxylate (azilsartan dimedoxomil, 10, (5-methyl-2-oxo-1,3-dioxo-4-ylmethyl 1-[2’-(4,5-dihydro-5-oxo-4H- 1,2,4-oxadiazol-3-ylbiphenyl-4-yl]methyl]-2-methoxy-1H-benzimidazole-7-carboxylate (methoxy analogue of azilsartan medoxomil, 11, Methyl 1-((2’-amidobiphenyl-4-yl methyl-2-ethoxy-1H-benzo[d]imidazole-7-carboxylate (amide methyl ester, 12. The present work describes the origin, synthesis and characterization of these related substances.

  13. Synthesis and characterization of the natural and burned hydrotalcite

    International Nuclear Information System (INIS)

    Granados C, F.

    2006-01-01

    The synthesis and the structural and surface properties of the natural and burned hydrotalcite using salts of AlCl 3 and MgCl 2 .6H 2 O its were studied. Its were used those analysis of BET, IR, XRD, TGA and SEM to characterize these materials. The obtained product was identified as the natural or carbonated hydrotalcite of chemical formula Mg 6 Al 2 (OH) 16 CO 3 .4H 2 O. The hydrotalcite was roasted at 500 C during 5 h and the was obtained roasted hydrotalcite (HTC) that is a material of high selectivity toward the anions that it can be efficiently used as adsorbent material in studies of adsorption for the treatment of anionic radioactive waste present in watery solution. (Author)

  14. Synthesis and characterization of new polyamino-cyclodextrin materials.

    Science.gov (United States)

    Lo Meo, Paolo; D'Anna, Francesca; Gruttadauria, Michelangelo; Riela, Serena; Noto, Renato

    2012-01-10

    With the aim of the synthesis of chemically modified cyclodextrins bearing polyamine pendant groups, potentially useful as capping agents for the preparation of nanosized metal systems or as auxiliaries for gene transfection, the reaction between the heptakis-(6-iodo)-(6-deoxy)-β-cyclodextrin and various polyamines has been explored. This synthetic approach allows obtaining materials constituted by mixtures of cyclodextrins, having different degrees of substitution, which were satisfactorily characterized by means of various complementary techniques (ESI-MS, NMR, potentiometric titration). The products obtained were successfully subjected to preliminary tests for their binding abilities towards suitable organic guests and as capping agents for the preparation of stable silver nanoparticles. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. Optimization of amine-terminated polyacrylonitrile synthesis and characterization

    Directory of Open Access Journals (Sweden)

    Mohamed H. El-Newehy

    2014-04-01

    Full Text Available Amine-terminated PANs were prepared in two steps. The first step includes free radical polymerization of acrylonitrile (AN using initiator pair of ammonium persulfate and sodium thiosulfate as redox system. In the second step, the amino groups were introduced through the reaction of polyacrylonitrile with excess of different diamines (10-fold including ethylenediamine (EDA, hexamethylenediamine (HMDA and octamethylenediamine (OMDA, to yield PAN–EDA, PAN–HMDA and PAN–OMDA, respectively. Optimization of the amine-terminated PANs synthesis was carried out at different temperatures (30–90 °C and different time intervals (4–24 h. In addition, the introduction of the amino group was followed by the piperidine test and recording of the FT-IR spectra. All polymers were characterized by, 1H NMR spectra, thermogravimetric analysis (TGA, and FT-IR spectra.

  16. Synthesis and characterization of silica-coated nanoparticles of magnetite

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, R. V., E-mail: robertavia@gmail.com; Pereira, I. L. S.; Cavalcante, L. C. D. [Universidade Federal de Minas Gerais, Departamento de Quimica (Brazil); Gamarra, L. F. [Instituto Israelita de Ensino e Pesquisa Albert Einstein, IIEPAE (Brazil); Carneiro, S. M. [Instituto Butantan (Brazil); Amaro, E. [Instituto Israelita de Ensino e Pesquisa Albert Einstein, IIEPAE (Brazil); Fabris, J. D.; Domingues, R. Z. [Universidade Federal de Minas Gerais, Departamento de Quimica (Brazil); Andrade, A. L., E-mail: angelala01@hotmail.com [Universidade Federal de Minas Gerais, Departamento de Quimica/s10 (Brazil)

    2010-01-15

    Magnetic nanoparticles coated with silica have been subjected of extensive, and, in many aspects, also intensive investigations because of their potential application in different technological fields, particularly in biomedicine. This work was conceived and is being carried out in two main parts: (1) synthesis of the ferrimagnetic nanoparticles, specifically magnetite, and (2) coating these particles with tetraethyl orthosilicate (TEOS). The nanosized magnetite sample was prepared by the reduction-precipitation and the nanomagnetite particles were coated by the sol-gel method, based on the hydrolysis of tetraethyl orthosilicate (TEOS). The so obtained materials were characterized with powder X-ray diffraction (XRD), FTIR spectroscopy, saturation magnetization measurements, and {sup 57}Fe Moessbauer spectroscopy at room temperature.

  17. Synthesis, characterization, and antimicrobial properties of copper nanoparticles

    Science.gov (United States)

    Usman, Muhammad Sani; Zowalaty, Mohamed Ezzat El; Shameli, Kamyar; Zainuddin, Norhazlin; Salama, Mohamed; Ibrahim, Nor Azowa

    2013-01-01

    Copper nanoparticle synthesis has been gaining attention due to its availability. However, factors such as agglomeration and rapid oxidation have made it a difficult research area. In the present work, pure copper nanoparticles were prepared in the presence of a chitosan stabilizer through chemical means. The purity of the nanoparticles was authenticated using different characterization techniques, including ultraviolet visible spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and field emission scanning electron microscopy. The antibacterial as well as antifungal activity of the nanoparticles were investigated using several microorganisms of interest, including methicillin-resistant Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Salmonella choleraesuis, and Candida albicans. The effect of a chitosan medium on growth of the microorganism was studied, and this was found to influence growth rate. The size of the copper nanoparticles obtained was in the range of 2–350 nm, depending on the concentration of the chitosan stabilizer. PMID:24293998

  18. Electrochemical Synthesis and Characterization of Zinc Sulfide Nanoparticles

    Directory of Open Access Journals (Sweden)

    M. Rahimi-Nasarabadi

    2014-04-01

    Full Text Available Electrosynthesis process has been used for preparation of zinc sulfide nanoparticles. Zinc sulfide nanoparticles in different size and shapes were electrodeposited by electrolysis of zinc plate as anode in sodium sulfide solution. Effects of several reaction variables, such as electrolysis voltage, sulfide ion concentration as reactant, stirring rate of electrolyte solution and temperature on particle size of prepared zinc sulfide were investigated. The significance of these parameters in tuning the size of zinc sulfide particles was quantitatively evaluated by analysis of variance (ANOVA. Also, optimum conditions for synthesis of zinc sulfide nanoparticles via electrosynthesis reaction were proposed. The structure and composition of prepared nanoparticles under optimum condition was characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM, transmission electron microscopy (TEM, and UV-Vis spectrophotometry techniques.

  19. Synthesis and Characterization of Hydroxyapatite/Fullerenol Nanocomposites.

    Science.gov (United States)

    Djordjevic, Aleksandar; Ignjatovic, Nenad; Seke, Mariana; Jovic, Danica; Uskokovic, Dragan; Rakocevic, Zlatko

    2015-02-01

    Fullerenols are polyhydroxylated, water soluble derivatives of fullerene C60, with potential application in medicine as diagnostic agents, antioxidants or nano drug carriers. This paper describes synthesis and physical characterization of a new nanocomposite hydroxyapatite/fullerenol. Surface of the nanocomposite hydroxyapatite/fullerenol is inhomogeneous with the diameter of the particles in the range from 100 nm to 350 nm. The ζ potential of this nanocomposite is ten times lower when compared to hydroxyapatite. Surface phosphate groups of hydroxyapatite are prone to forming hydrogen bonds, when in close contact with hydroxyl groups, which could lead to formation of hydrogen bonds between hydroxyapatite and hydroxyl groups of fullerenol. The surface of hydroxyapatite particles (-2.5 mV) was modified by fullerenol particles, as confirmed by the obtained ζ potential value of the nanocomposite biomaterial hydroxyapatite/fullerenol (-25.0 mV). Keywords: Hydroxyapatite, Fullerenol, Nanocomposite, Surface Analysis.

  20. Synthesis and Spectroscopic Characterization of Two Tetrasubstituted Cationic Porphyrin Derivatives

    Directory of Open Access Journals (Sweden)

    Newton M. Barbosa Neto

    2011-07-01

    Full Text Available An imidazolium tetrasubstituted cationic porphyrin derivative (the free base and its Zn(II complex with five-membered heterocyclic groups in the meso-positions were synthesized using microwave irradiation, and the compounds obtained characterized by 1H-NMR and mass spectrometry. We observed that under microwave irradiation the yield is similar to when the synthesis is performed under conventional heating, however, the time required to prepare the porphyrins decreases enormously. In order to investigate the electronic state of these compounds, we employed UV-Vis and fluorescence spectroscopy combined with quantum chemical calculations. The results reveal the presence, in both compounds, of a large number of electronic states involving the association between the Soret and a blue-shifted band. The Soret band in both compounds also shows a considerable solvent dependence. As for emission, these compounds present low quantum yield at room temperature and no solvent influence on the fluorescence spectra was observed.

  1. Synthesis, characterization and catalytic activity of CdO nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Singh, G., E-mail: gsingh4us@yahoo.com [Department of Chemistry, D.D.U. Gorakhpur University, Gorakhpur 273009 (India); Kapoor, I.P.S.; Dubey, Reena; Srivastava, Pratibha [Department of Chemistry, D.D.U. Gorakhpur University, Gorakhpur 273009 (India)

    2011-02-15

    In this paper, we report the synthesis of nanocrystalline cadmium oxide (CdO) and its characterization by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Its catalytic activity was investigated on the thermal decomposition of 1,2,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX), ammonium perchlorate (AP), hydroxyl terminated polybutadiene (HTPB) and composite solid propellants (CSPs) using thermogravimetric analysis (TG), simultaneous thermogravimerty and differential scanning calorimetry (TG-DSC) and ignition delay measurements. Kinetics of thermal decomposition of AP + CdO has also been investigated using model free (isoconversional) and model-fitting approaches which have been applied to data for isothermal TG decomposition. All these studies show enhancement in the rate of decomposition of AP, HTPB and CSPs but no effect on HMX. The burning rate of CSPs has also been found to be increased with CdO nanocrystals.

  2. Nanoscale Synthesis and Characterization Laboratory Annual Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, A V; Lesuer, D R

    2006-01-03

    The Nanoscale Synthesis and Characterization Laboratory's (NSCL) primary mission is to create and advance interdisciplinary research and development opportunities in nanoscience and technology. The initial emphasis of the NSCL has been on development of scientific solutions in support of target fabrication for the NIF laser and other stockpile stewardship experimental platforms. Particular emphasis has been placed on the design and development of innovative new materials and structures for use in these targets. Projects range from the development of new high strength nanocrystalline alloys to graded density materials to high Z nanoporous structures. The NSCL also has a mission to recruit and train personnel for Lab programs such as the National Ignition Facility (NIF), Defense and Nuclear Technologies (DNT), and Nonproliferation, Arms control and International security (NAI). The NSCL continues to attract talented scientists to the Laboratory.

  3. Characterization of a NIMONIC TYPE super alloy

    International Nuclear Information System (INIS)

    Zamora Rangel, L.; Martinez Martinez, E.

    1985-01-01

    Mechanical properties of strength and thermofluence of a NIMONIC type super alloy under thermal treatment was determined. The relationship between microstructure, phases and precipitates was also studied. (author)

  4. Synthesis and characterization of different morphological SnS nanomaterials

    International Nuclear Information System (INIS)

    Chaki, Sunil H; Chaudhary, Mahesh D; Deshpande, M P

    2014-01-01

    SnS in three nano forms possessing different morphologies such as particles, whiskers and ribbons were synthesised by chemical route. The morphology variation was brought about in the chemical route synthesis by varying a synthesis parameter such as temperature and influencing the synthesis by use of surfactant. The elemental composition determination by energy dispersive analysis of x-rays (EDAX) showed that all three synthesized SnS nanomaterials were tin deficient. The x-ray diffraction (XRD) study of the three SnS nanomaterials showed that all of them possess orthorhombic structure. The Raman spectra of the three SnS nanomaterials showed that all three samples possess three common distinguishable peaks. In them two peaks lying at 98 ± 1 cm −1 and 224 ± 4 cm −1 are the characteristic A g mode of SnS. The third peak lying at 302 ± 1 cm −1 is associated with secondary Sn 2 S 3 phase. The transmission electron microscopy (TEM) confirmed the respective morphologies. The optical analysis showed that they possess direct as well as indirect optical bandgap. The electrical transport properties study on the pellets prepared from the different nanomaterials of SnS showed them to be semiconducting and p-type in nature. The current–voltage (I–V) plots of the silver (Ag)/SnS nanomaterials pellets for dark and incandescent illumination showed that all configurations showed good ohmic behaviour except Ag/SnS nanoribbons pellet configuration under illumination. All the obtained results are discussed in detail. (paper)

  5. Does Negative Type Characterize the Round Sphere?

    DEFF Research Database (Denmark)

    Kokkendorff, Simon Lyngby

    2007-01-01

    We discuss the measure theoretic metric invariants extent, mean distance and symmetry ratio and their relation to the concept of negative type of a metric space. A conjecture stating that a compact Riemannian manifold with symmetry ratio 1 must be a round sphere, was put forward in a previous paper....... We resolve this conjecture in the class of Riemannian symmetric spaces by showing, that a Riemannian manifold with symmetry ratio 1 must be of negative type and that the only compact Riemannian symmetric spaces of negative type are the round spheres....

  6. Combustion synthesis and characterization of uranium and thorium tellurides

    International Nuclear Information System (INIS)

    Czechowicz, D.G.

    1985-10-01

    This report describes an investigation of the chemical systems uranium-tellurium and thorium-tellurium. A novel synthesis technique, combustion synthesis, which uses the exothermic heat of reaction rather than externally supplied heat, was utilized to form the phases UTe, U 3 Te 4 , and UTe 2 in the U-Te system and the phases ThTe, Th 2 Te 3 , and ThTe 2 in the Th-Te system from reactions of the type U/sub x/ + Te/sub y/ = U/sub x/Te/sub y/. With this synthetic method, U-Te and Th-Te products could be formed in a matter of seconds, and the purity of the products was often greater than that of the starting materials used. Control over final product stoichiometry was found to be very difficult. The product phase distribution observed in combustion products, as determined by x-ray diffraction, electron microprobe, and optical metallographic methods, was found to be spatially complex. Lattice constants were calculated from x-ray diffraction patterns for the compounds UTe, U 3 Te 4 , and ThTe. SOLGASMIX thermodynamic equilibrium calculations were performed using available and estimated thermodynamic data on the system U-Te-O in an attempt to understand the products formed by combustion. Adiabatic combustion reaction temperatures for specific U-Te and Th-Te reactions were also calculated utilizing available and estimated thermodynamic data. 71 refs., 31 figs., 15 tabs

  7. Tuned apatitic materials: Synthesis, characterization and potential antimicrobial applications

    Science.gov (United States)

    Fierascu, Irina; Fierascu, Radu Claudiu; Somoghi, Raluca; Ion, Rodica Mariana; Moanta, Adriana; Avramescu, Sorin Marius; Damian, Celina Maria; Ditu, Lia Mara

    2018-04-01

    Inorganic antimicrobial materials can be viable for multiple applications (related to its use for new buildings with special requirements related to microbiological loading, such as hospital buildings and for consolidation of cultural heritage constructions); also the use of substituted hydroxyapatites for protection of stone artefacts against environmental factors (acidic rain) and biodeterioration it's an option to no longer use of toxic substances. This paper presents methods of synthesis and characterization of the material from the point of view of the obtained structures and final applications. The materials were characterized in terms of composition and morphology (using X-ray Diffraction, X-ray Fluorescence, Inductively coupled plasma-atomic emission spectrometry, Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy, Surface area and pore size determination). Antimicrobial activity was tested against filamentous fungi strains and pathogenic bacteria strains, using both spot on lawn qualitative method (on agar medium) and serial microdilution quantitative method (in broth medium). Further, it was evaluated the anti-biofilm activity of the tested samples toward the most important microbial strains implicated in biofilm development, using crystal violet stained biofilms microtiter assay, followed by spectrophotometric quantitative evaluation.

  8. Synthesis and Characterization of Gelatin-Based Magnetic Hydrogels

    Science.gov (United States)

    Helminger, Maria; Wu, Baohu; Kollmann, Tina; Benke, Dominik; Schwahn, Dietmar; Pipich, Vitaliy; Faivre, Damien; Zahn, Dirk; Cölfen, Helmut

    2014-01-01

    A simple preparation of thermoreversible gelatin-based ferrogels in water provides a constant structure defined by the crosslinking degree for gelatin contents between 6 and 18 wt%. The possibility of varying magnetite nanoparticle concentration between 20 and 70 wt% is also reported. Simulation studies hint at the suitability of collagen to bind iron and hydroxide ions, suggesting that collagen acts as a nucleation seed to iron hydroxide aggregation, and thus the intergrowth of collagen and magnetite nanoparticles already at the precursor stage. The detailed structure of the individual ferrogel components is characterized by small-angle neutron scattering (SANS) using contrast matching. The magnetite structure characterization is supplemented by small-angle X-ray scattering and microscopy only visualizing magnetite. SANS shows an unchanged gelatin structure of average mesh size larger than the nanoparticles with respect to gel concentration while the magnetite nanoparticles size of around 10 nm seems to be limited by the gel mesh size. Swelling measurements underline that magnetite acts as additional crosslinker and therefore varying the magnetic and mechanical properties of the ferrogels. Overall, the simple and variable synthesis protocol, the cheap and easy accessibility of the components as well as the biocompatibility of the gelatin-based materials suggest them for a number of applications including actuators. PMID:25844086

  9. Synthesis and characterization of carbon fibers obtained through plasma techniques

    International Nuclear Information System (INIS)

    Valdivia B, M.

    2005-01-01

    The study of carbon, particularly the nano technology is a recent field, the one which has important implications in the science of new materials. It investigation is of great interest for industries producers of ceramic, metallurgy, electronic, energy storage, biomedicine, among others. The diverse application fields are a reason at national as international level, so that many works are focused in the production of nano fibers of carbon. The Thermal plasma applications laboratory (LAPT) of the National Institute of Nuclear Research (ININ), it is carrying out works about carbon nano technology. The present work has as purpose to carry out the synthesis and characterization of the carbon nano fibers which are obtained by electric arch of alternating current (CA) to high frequencies and by a plasma gun of non transferred arch, where are used hydrocarbons like benzene, methane, acetylene like carbon source and ferrocene, nickel, yttrium and cerium oxide like catalysts. For both techniques its were thought about a relationship among hydrocarbon-catalyst that it favored to the nano fibers production. The obtained product of each experiment outlined it was analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD), analysis with those were obtained pictures and diffraction graphs, which were observed to arrive to one conclusion on the operation conditions, same analysis with those were characterized the tests carried out according to the nano structures formation of carbon. (Author)

  10. Gamma radiation-induced synthesis and characterization of Polyvinylpyrrolidone nanogels

    Science.gov (United States)

    Ges, A. A.; Viltres, H.; Borja, R.; Rapado, M.; Aguilera, Y.

    2017-01-01

    Due to the importance of bioactive peptides, proteins and drug for pharmaceutical purpose, there is a growing interest for suitable delivery systems, able to increase their bioavailability and to target them to the desired location. Some of the most studied delivery systems involve encapsulation or entrapment of drugs into biocompatible polymeric devices. A multitude of techniques have been described for the synthesis of nanomaterials from polymers, however, the use of ionizing radiation (γ, e-), to obtain nano- and microgels polymer is characterized by the possibility of obtaining products with a high degree of purity. Although, in the world, electronic radiation is used for this purpose, gamma radiation has not been utilized for these purposes. In this paper is developed the formulation the formulation of Polyvinylpyrrolidone (PVP) nanogels synthesized by gamma radiation techniques, for their evaluation as potential system of drug delivery. Experiments were performed in absence of oxygen using aqueous solutions of PVP (0.05% -1%). Crosslinking reactions were carried out at 25° C in a gamma irradiation chamber with a 60Co source (MPX-γ 30). The Viscosimetry, Light Scattering, X-Ray Diffraction and Transmission Electron Microscopy (TEM), were used as characterization techniques.

  11. Synthesis and characterization of thermoplastic polyurethane/nanoclay composites

    Energy Technology Data Exchange (ETDEWEB)

    Pizzatto, Leandro [Autotravi Borrachas e Plasticos Ltda, Caxias do Sul (Brazil); Lizot, Analice; Fiorio, Rudinei [Departamento de Engenharia Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Amorim, Cintia L.; Machado, Giovanna [Programa de Pos-Graduacao em Materiais, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Giovanela, Marcelo [Departamento de Fisica e Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Zattera, Ademir J. [Departamento de Engenharia Quimica, Universidade de Caxias do Sul, Caxias do Sul (Brazil); Crespo, Janaina S. [Grupo de Materiais Elastomericos, Universidade de Caxias do Sul, Caxias do Sul (Brazil)], E-mail: jscrespo@ucs.br

    2009-03-01

    In this study thermoplastic polyurethane (TPU) composites were obtained with different nanoclay contents (0, 1, 3 for all cases and 10 wt.% in some cases). The nanoclay Cloisite (registered) 30B (C30B) was dispersed in the TPU matrix by melt processing (twin-screw extruder; TPU-E composites) and during bulk polymerization (TPU-S composites). The synthesis method involved the two-step bulk polymerization of polyesterpolyol (molecular weight 2000 g mol{sup -1}) and diphenylmethanediisocyanate (MDI) with 1,4-butanediol as the chain extender. The dispersion state of the nanoclay particles and its effect on the mechanical properties of the composites, before and after ageing, was investigated. The characterization of TPU/nanoclay composites was carried out by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanical characterization was performed through determination of the tensile and tear strengths. The TPU-E 3 wt.% composite showed the best improvement with increases in stress and strain at break (28% and 35%, respectively) and energy (88%), compared to the TPU-E (sample without nanoclay)

  12. Synthesis and characterization of carboxylic acid functionalized silicon nanoparticles

    Science.gov (United States)

    Shaner, Ted V.

    Silicon nanoparticles are of great interest in a great number of fields. Silicon nanoparticles show great promise particularly in the field of bioimaging. Carboxylic acid functionalized silicon nanoparticles have the ability to covalently bond to biomolecules through the conjugation of the carboxylic acid to an amine functionalized biomolecule. This thesis explores the synthesis of silicon nanoparticles functionalized by both carboxylic acids and alkenes and their carboxylic acid functionality. Also discussed is the characterization of the silicon nanoparticles by the use of x-ray spectroscopy. Finally, the nature of the Si-H bond that is observed on the surface of the silicon nanoparticles will be investigated using photoassisted exciton mediated hydrosilation reactions. The silicon nanoparticles are synthesized from both carboxylic acids and alkenes. However, the lack of solubility of diacids is a significant barrier to carboxylic acid functionalization by a mixture of monoacids and diacids. A synthesis route to overcome this obstacle is to synthesize silicon nanoparticles with terminal vinyl group. This terminal vinyl group is distal to the surface of the silicon nanoparticle. The conversion of the vinyl group to a carboxylic acid is accomplished by oxidative cleavage using ozonolysis. The carboxylic acid functionalized silicon nanoparticles were then successfully conjugated to amine functionalized DNA strand through an n-hydroxy succinimide ester activation step, which promotes the formation of the amide bond. Conjugation was characterized by TEM and polyacrylamide gel electrophoresis (PAGE). The PAGE results show that the silicon nanoparticle conjugates move slower through the polyacrylamide gel, resulting in a significant separation from the nonconjugated DNA. The silicon nanoparticles were then characterized by the use of x-ray absorption near edge spectroscopy (Xanes) and x-ray photoelectron spectroscopy (XPS) to investigate the bonding and chemical

  13. Chemical Synthesis and Characterization of Carbon Supported Palladium Electro-Catalysts

    Science.gov (United States)

    Acosta, J. J.; Favilla, P. C.; Collet-Lacoste, J. R.

    The aim of this work is to present the results obtained for the synthesis of Pd NPs by the modified-polyol method with Vulcan XC-72R as support. Two different ways were used to synthesize catalysts: (a) Maintaining the initial pH of the synthesis equal to 12 and changing the initial concentration of the precursor to obtain an overall 10 wt.% nominal Pd load; (b) Fixing the initial concentration of the precursor at 2mM whilst changing the initial pH of the synthesis at different values to obtain an overall 10wt.% nominal Pd load. Catalysts were characterized using X-ray diffraction (XRD), Transmission electron microscopy (HRTEM, TEM, STEM) and cyclic voltammetry (CV). This work shows that the density of NPs generated during the nucleation process is a consequence of the fluctuation of the concentration. The standard deviation of the diameters varied linearly with the mean volume for values between 0.5mM and 6mM, demonstrating that there was a clear separation between nucleation and growth processes. The final mean diameter strongly depends on the initial pH of the synthesis for the same initial concentration of the precursor; mean diameters are smaller for basic media. The analysis of the voltammograms allowed the determination of the coverage fraction of oxygen on Pd, obtaining a value of 0.51 with a structure type c(2×2). The coverage value found for CO is 0.71 with a structure type p(2×2)-3CO.

  14. Synthesis, characterization, and controlled assembly of functional nanostructures

    Science.gov (United States)

    Patete, Jonathan M.

    Nanomaterials represent a particularly interesting class of materials for research, as they bridge the gap between bulk materials and atomic or molecular structures, and often exhibit both novel chemical and physical properties. These properties may be altered not only by the chemical composition of the material but also by the size and shape of the nanoparticle. More specifically, the inherent anisotropy of one-dimensional nanostructures renders them as particularly efficient for electron transport applications. These materials are also highly sought after, because their distinctive shape allows for facile incorporation into functional device configurations. My graduate research has spanned several stages of nanotechnology from the synthesis and characterization of one-dimensional metal oxide nanostructures to the assembly of metal nanoparticles for practical device engineering. In particular, I have investigated the effect of the nanoscale size regime on the electronic, magnetic, and optical properties of as-prepared nanowires composed of hexagonal yttrium manganese oxide and olivine lithium iron phosphate. As a multiferroic material, h-YMnO3 is predominately sought after for applications in data storage devices. Alternatively, nanoscale LiFePO4 has shown a lot of promise as a cathode material in advanced lithium ion battery systems. The synthesis of both materials was achieved through template-directed methods, thereby allowing for precise control over the size and morphology of the as-obtained product. Finally, purposeful, directed methods for controlling the deposition pattern of metallic nanoparticles on a two-dimensional surface will be presented, and their viability as functional optical sensors will be explored.

  15. Nanocrystalline hydroxyapatite doped with magnesium and zinc: Synthesis and characterization

    International Nuclear Information System (INIS)

    Kalita, Samar J.; Bhatt, Himesh A.

    2007-01-01

    During recent years, there have been efforts in developing nanocrystalline bioceramics, to enhance their mechanical and biological properties for use in tissue engineering applications. In this research, we made an attempt to synthesize nanocrystalline bioactive hydroxyapatite (Ca 10 (PO 4 ) 6 (OH) 2 , HAp) ceramic powder in the lower-end of nano-range (2-10 nm), using a simple low-temperature sol-gel technique and studied its densification behavior. We further studied the effects of metal ion dopants during synthesis on powder morphology, and the properties of the sintered structures. Calcium nitrate and triethyl phosphite were used as precursors for calcium and phosphorous, respectively, for sol-gel synthesis. Calculated quantities of magnesium oxide and zinc oxide were incorporated as dopants into amorphous dried powder, prior to calcination at 250-550 o C. The synthesized powders were analyzed for their phases using X-ray diffraction technique and characterized for powder morphology and particle size using transmission electron microscopy (TEM). TEM analysis showed that the average particle size of the synthesized powders were in the range of 2-10 nm. The synthesized nano-powders were uniaxially compacted and then sintered at 1250 o C and 1300 o C for 6 h, separately, in air. A maximum average sintered density of 3.29 g/cm 3 was achieved in structures sintered at 1300 o C, developed from nano-powder doped with magnesium. Vickers hardness testing was performed to determine the hardness of the sintered structures. Uniaxial compression tests were performed to evaluate the mechanical properties. Bioactivity and biodegradation behavior of the sintered structures were assessed in simulated body fluid (SBF) and maintained in a dynamic state

  16. Hydrothermal synthesis and characterization of zirconia based catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Caillot, T., E-mail: Thierry.caillot@ircelyon.univ-lyon1.fr; Salama, Z.; Chanut, N.; Cadete Santos Aires, F.J.; Bennici, S.; Auroux, A.

    2013-07-15

    In this work, three equimolar mixed oxides ZrO{sub 2}/CeO{sub 2}, ZrO{sub 2}/TiO{sub 2}, ZrO{sub 2}/La{sub 2}O{sub 3} and a reference ZrO{sub 2} have been synthesized by hydrothermal method. The structural and surface properties of these materials have been fully characterized by X-ray diffraction, transmission electron microscopy, surface area measurement, chemical analysis, XPS, infrared spectroscopy after adsorption of pyridine and adsorption microcalorimetry of NH{sub 3} and SO{sub 2} probe molecules. All investigated mixed oxides are amphoteric and possess redox centers on their surface. Moreover, hydrothermal synthesis leads to catalysts with higher surface area and with better acid–base properties than classical coprecipitation method. Both Lewis and Brønsted acid sites are present on the surface of the mixed oxides. Compared to the other samples, the ZrO{sub 2}/TiO{sub 2} material appears to be the best candidate for further application in acid–base catalysis. - Graphical abstract: Mesoporous amorphous phase with a high surface area of titania zirconia mixed oxide obtained by hydrothermal preparation. - Highlights: • Three zirconia based catalysts and a reference were prepared by hydrothermal synthesis. • Mixed oxides present larger surface areas than the reference ZrO{sub 2}. • ZrO{sub 2}/TiO{sub 2} catalyst presents a mesoporous structure with high surface area. • ZrO{sub 2}/TiO{sub 2} catalyst presents simultaneously strong acidic and basic properties.

  17. Synthesis and characterization of poly iodine anilines by plasma

    International Nuclear Information System (INIS)

    Enriquez P, M.A.

    2003-01-01

    The polymers and organic materials present a numberless quantity of applications. However, it has not been but until recent times that it has been found that some of these materials can possess semiconductor properties. This has generated a great interest for the investigation in the area of semiconductor polymers. The poly aniline (Pan) it is one of the main semiconductor polymers because their electric properties change depending on the doping and of the state of oxidation to the one the molecules are subjected. The synthesis of this material has been carried out by means of chemical oxidation or electrochemistry. In this work a study is presented on the formation of poly aniline polymers with halogens chemically united to the aniline ring, poly(m-iodine aniline) (m-PAnI) and poly(m-chloroaniline) (m-PAnCI) for plasma. The plasma is generated by means of discharges of splendor with an r f amplifier to 13.5 MHz to drops pressures (10 -2 mbar). The synthesized polymers were obtained in form of thin film in the walls of the reactor and in the substrate introduced in the one. The electric properties of the polymers were evaluated in function of the time of reaction. Also, the conductivity of the polymers was compared synthesized in this work with reported data of synthesized poly aniline and doped with iodine for plasma. The highest values in conductivity are obtained in the poly aniline where the halogens are chemically connected to the ring that if it is doped with iodine. The atomic proportion in the surface of the polymers was analyzed by dispersive energy spectroscopy with which is deduced that the halogens come off of the molecules of the monomers or of the polymer in formation and that the atoms of iodine get lost more easily than those of chlorine. Other techniques that were used to characterize to the poly aniline were scanning electron microscopy, infrared spectroscopy, thermal gravimetric analysis and X-ray diffraction. The results are presented in

  18. Solid-state Chemical Reaction Synthesis and Characterization of Lanthanum Tartrate Nanocrystallites Under Ultrasonication Spectra

    Science.gov (United States)

    Li, Dao-hua; He, Shao-fen; Chen, Jie; Jiang, Cheng-yan; Yang, Cheng

    2017-09-01

    Under near room temperature, by using sodium tartrate, lanthanum trichloride, lanthanum acetate, and lanthanum nitrate as reactants, we synthesize the lanthanum tartrate nanocrystals in one step under the condition that the infrared lamp is irradiated and the polyethylene glycol 400 is used as the surfactant, where the synthesis method of nanoparticles by solid phase chemical reaction is used. Deionized water after washing with ethanol washes. Tartaric acid lanthanum crystalline powder is gotten, respectively. Analyze solid products phase using X-ray diffraction (XRD) and electron diffraction; characterize the functional groups structure with infrared spectra, and analyzethe change of functional groups in drugs before and after reaction; observe the size, shape, and size distribution of particlesby transmission electron microscopy(TEM). Testing 3 types of tartaric acid crystal powder of lanthanum are nano-crystallization, solid products are granular and relatively uniform in size, with an average particle diameter of about 40 nm, and the yield rate is approximately 92.3%. Furthermore, during the synthesis, the solid-state reaction conditions including raw materials, matching proportion of reactants, additions of inert substance, addition of trace solvents, surfactants and porphyrization time, etc, all have some influence on the morphology, particle size and size distribution of the final products. During the synthesis of the lanthanum tartrate nanocrystallites, the solid state reaction conditions such as changing reactant, matching proportion of reactant, adding inert substance, joining a little solvent or surface active solvent and grinding at different times may influence morphology, particle size and the size distribution of final products.

  19. Monodisperse hollow silica nanospheres for nano insulation materials: synthesis, characterization, and life cycle assessment.

    Science.gov (United States)

    Gao, Tao; Jelle, Bjørn Petter; Sandberg, Linn Ingunn C; Gustavsen, Arild

    2013-02-01

    The application of manufactured nanomaterials provides not only advantages resulting from their unique properties but also disadvantages derived from the high energy use and CO(2) burden related to their manufacture, operation, and disposal. It is therefore important to understand the trade-offs of process economics of nanomaterial production and their associated environmental footprints in order to strengthen the existing advantages while counteracting disadvantages. This work reports the synthesis, characterization, and life cycle assessment (LCA) of a new type of superinsulating materials, nano insulation materials (NIMs), which are made of hollow silica nanospheres (HSNSs) and have great flexibility in modifying their properties by tuning the corresponding structural parameters. The as-prepared HSNSs in this work have a typical inner pore diameter of about 150 nm and a shell thickness of about 10-15 nm and exhibit a reduced thermal conductivity of about 0.02 W/(m K) because of their size-dependent thermal conduction at the nanometer scale. The energy and raw material consumption related to the synthesis of HSNSs have been analyzed by the LCA method. The results indicate that the recycle of chemicals, up-scaling production, and use of environmentally friendly materials can greatly affect the process of environmental footprints. New synthesis routes for NIMs with improved thermal performance and energy and environmental features are also recommended on the basis of the LCA study.

  20. Synthesis and characterization of polycaprolactone for anterior cruciate ligament regeneration

    International Nuclear Information System (INIS)

    Gurlek, Ayse Cansu; Sevinc, Burcu; Bayrak, Ece; Erisken, Cevat

    2017-01-01

    Anterior cruciate ligament (ACL) is the most frequently torn ligament in the knee, and complete healing is unlikely due to lack of vascularization. Current approaches for the treatment of ACL injuries include surgical interventions and grafting, however recent reports show that surgeries have 94% recurrency, and that repaired tissues are biomechanically inferior to the native tissue. These necessitate the need for new strategies for scar-free repair/regeneration of ACL injuries. Polycaprolactone (PCL) is a biodegradable and biocompatible synthetic polymer, which has been widely used in the connective tissue repair/regeneration attempts. Here, we report on the synthesis of PCL via ring opening polymerization using ε-caprolactone as the monomer, and ammonium heptamolybdate as a catalyst. The synthesized PCL was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Nuclear Magnetic Resonance (NMR) spectroscopy. It was then processed using electrospinning to form nanofiber-based scaffolds. These scaffolds were characterized in terms of surface as well as mechanical properties, and compared to the properties of commercially available PCL, and of native ACL tissue harvested from sheep. In addition, scaffolds fabricated with synthesized PCL were evaluated regarding their cell attachment capacity using human bone marrow mesenchymal stem cells (hBMSCs). Our findings demonstrated that the synthesized PCL is similar to its commercially available counterpart in terms of surface morphology and mechanical properties. In addition, fibrous scaffolds generated with electrospinning showed weaker mechanical properties visa vis native ACL tissue in terms of ultimate stress, and elastic modulus. Also, the synthesized PCL can accommodate cell attachment when tested with hBMSCs. Putting together, these observations reveal that the PCL synthesized in this study could be a good candidate as a biomaterial for ligament repair or regeneration. - Highlights: • Synthesis of

  1. Synthesis and characterization of tungsten carbide doped cobalt via gas-solid reaction in rotary bed reactor

    International Nuclear Information System (INIS)

    Tertuliano, R.S.C.; Araujo, C.P.B. de; Frota, A.V.V.M.; Moriyama, A.L.L.; Souza, C.P. de

    2016-01-01

    The search for materials with high added value, high applicability and sustainability, motivates innovations in all areas of engineering. In this context, so-called doped carbides, ceramic and metal compounds are included. This work proposes the synthesis and characterization of tungsten carbide doped cobalt (WC-Co) through the gas-solid reaction in a rotating bed reactor. The production stages of the material are: precursor synthesis by wetting, drying at 80 deg C, characterization of the precursor by MEV, DRX and FRX, gas-solid reaction at 750 deg C in a reducing atmosphere of CH 4 / H 2 in a rotary reactor at 34 rpm and characterization of the reaction product by the techniques already mentioned. The results showed that tungsten carbide powders were produced with cobalt inserted into the structure, with high surface area, nanometric grains and with potential for applications in the areas of catalysis, reactors and fuel cells, showing the relevance of this type of research

  2. Metal containing mesoporous silica materials: Synthesis, characterization, and applications

    Science.gov (United States)

    Gomez, Sinue

    The work presented here comprises the development of a new route for the incorporation of transition metals (TM = Mn, V, Cr) into the pores of mesoporous silica materials, the characterization, and the applications of the resulting materials. The mesoporous silica material used in this work is of the M41S family, known as MCM-48. The first part of the work is going to be focused on in the incorporation of manganese species. Characterization of the resulting materials will be sub-divided in two major parts: (1) Structural and textural properties and (2) Analysis of the Mn oxidation state, coordination and location in the mesoporous host. The process of incorporation of Mn into the mesoporous materials takes place by using high valence metal precursor anions. Then a mechanism to describe the process of loading the Mn species will be proposed. The method developed makes possible the incorporation of high loadings of transition metals while maintaining the properties of the host material, MCM-48. In the second part of the research the synthesis method developed in the first part is used to incorporate other transition metals such as vanadium and chromium. As in the first part, the nature of the TM species is investigated and their catalytic application in oxidation of styrene is also studied. The materials show good activity towards styrene oxidation with conversions as high as 100%. The catalysts can also be recycled without significant loss of activity. Finally, the last part of the research deals with the incorporation of tin oxide into mesoporous silica. A similar approach to the one used for transition metals was used to load tin in MCM-48, however, discrete tin oxide nanoparticles were formed on the surface of the mesoporous structure rather than inside of the pores. The sensing properties towards reducing gases such as hydrogen of these materials were tested, and the Sn containing mesoporous silica show promising properties for gas sensing applications.

  3. Synthesis and characterization of advanced nanomaterials for energy applications

    Science.gov (United States)

    Xie, Ming

    Energy is essential for life. It is thus important to continue understanding how to reduce energy consumption, and increase energy generation. The use of nanoscale materials (nanomaterials) are expected to reduce resources and energy needed in fabricating electrical and electronic devices and help in reducing energy consumption. For example, boron nitride nanotubes (BNNTs) which have uniform band structures, are expected to find application in nanoscale electronic and optoelectronic devices. These devices will have smaller dimension, cost fewer resources and less energy to fabricate, and consume less energy due to minimum electron scattering in their ideally defect-free tubular structures. On the other hand, nanomaterials are also expected to improve the performance of thermoelectric devices that can convert heat into energy. In this thesis, we first investigated low-temperature synthesis of BNNTs (Chapter 1). Effects of substrate temperatures, bias voltages, and catalysts are discussed and a selective-phase growth model is proposed. During the course of this investigation, we discovered Si nanotubes (SiNTs) by catalytic plasma treatment (Chapter 2). The detailed growth parameters and characterizations are presented and a modified growth model is discussed. In addition, electronic properties are measured by AFM. Since Si has exceptional thermoelectric properties, the newly discovered SiNTs are prospects for related applications. We have thus evaluated the potential conversion efficiency and production cost of various nanostructured thermoelectric materials (Chapter 3 and 4). Based on state-of-the-art dish-stirling systems, we evaluate the feasibility of replacing stirling engines by thermoelectric modules. Finally, we have decided to investigate the properties of boron-nanocarbon ensembles (Chapter 5 and 6) as prospective thermoelectric materials. Detailed characterizations includes SEM, HRTEM, Raman, XRD are presented. Seebeck coefficient and electrical

  4. Synthesis, characterization and in vivo evaluation of biocompatible ferrogels

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Lopez, M.T., E-mail: modesto@ugr.es [Department of Applied Physics, University of Granada, Granada (Spain); Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Rodriguez, I.A. [Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Department of Histology (Tissue Engineering Group), University of Granada, Granada (Spain); Rodriguez-Arco, L. [Department of Applied Physics, University of Granada, Granada (Spain); Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Carriel, V. [Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Department of Histology (Tissue Engineering Group), University of Granada, Granada (Spain); Bonhome-Espinosa, A.B. [Department of Applied Physics, University of Granada, Granada (Spain); Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Campos, F. [Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain); Department of Histology (Tissue Engineering Group), University of Granada, Granada (Spain); Zubarev, A. [Department of Mathematical Physics, Ural Federal University, Ekaterinburg (Russian Federation); Duran, J.D.G. [Department of Applied Physics, University of Granada, Granada (Spain); Instituto de Investigación Biosanitaria ibs.GRANADA, Granada (Spain)

    2017-06-01

    A hydrogel is a 3-D network of polymer chains in which water is the dispersion medium. Hydrogels have found extensive applications in the biomedical field due to their resemblance to living tissues. Furthermore, hydrogels can be endowed with exceptional properties by addition of synthetic materials. For example, magnetic field-sensitive gels, called ferrogels, are obtained by embedding magnetic particles in the polymer network. Novel living tissues with unique magnetic field-sensitive properties were recently prepared by 3-D cell culture in biocompatible ferrogels. This paper critically reviews the most recent progress and perspectives in their synthesis, characterization and biocompatibility evaluation. Optimization of ferrogels for this novel application requires low-density, strongly magnetic, multi-domain particles. Interestingly, the rheological properties of the resulting ferrogels in the absence of field were largely enhanced with respect to nonmagnetic hydrogels, which can only be explained by the additional cross-linking imparted by the embedded magnetic particles. Remarkably, rheological measurements under an applied magnetic field demonstrated that ferrogels presented reversibly tunable mechanical properties, which constitutes a unique advantage with respect to nonmagnetic hydrogels. In vivo evaluation of ferrogels showed good biocompatibility, with only some local inflammatory response, and no particle migration or damage to distant organs.

  5. L-arginine modified magnetic nanoparticles: green synthesis and characterization

    Science.gov (United States)

    Bagherpour, A. R.; Kashanian, F.; Seyyed Ebrahimi, S. A.; Habibi-Rezaei, M.

    2018-02-01

    In recent years, there has been considerable interest in Arg which is a unique, nontoxic, and biocompatible biomolecule since it can be utilized as an agent for the functionalization and subsequent stabilization of MNPs against oxidation and aggregation, during or after a synthesis procedure. Our studies demonstrate that Arg has great impacts on MNPs with the decreasing size of the particle. Also, saturation magnetization and electrostatic interactions of RMNPs have a direct impact on biological molecules such as proteins and nucleic acids. By controlling the concentration of Arg, it is possible to accurately control the above-mentioned characteristics, which are useful tools for applications such as connecting to antibodies, catalysis, drug loading, and modification of MNP stability. In the current study, three RMNPs with different Arg densities, i.e. 0.42, 1.62, and 2.29 μg per mg were successfully synthesized through a simple co-precipitation method (named p 0.5, p 1, and p 1.5, respectively) and verified by colorimetric determination. Also, the as-synthesized RMNP powders were characterized by XRD, SEM/EDAX, FTIR, VSM, and zeta potential analysis. The presence of a magnetic core was proved by XRD, FTIR, and EDAX. Colorimetric analysis showed the existence of Arg in the synthesized samples. According to the zeta potential and VSM results, increasing the cap of Arg on the MNP surface leads to an increase in the surface charge and decrease in the magnetization of the RMNPs, respectively.

  6. Synthesis and characterization of pillared stevensites: application to chromate adsorption.

    Science.gov (United States)

    Benhammou, A; Yaacoubi, A; Nibou, L; Bonnet, J P; Tanouti, B

    2011-01-01

    The purpose of this work was to study the synthesis of pillared interlayered clays from Moroccan stevensite called locally 'Ghassoul'. This clay has been intercalated with cetyltrimethylammonium surfactant (CTA-Stv) and aluminium hydroxypolycation (Al13-Stv). Characterization studies were performed using XRF, XRD, FTIR and DTA/TG analysis. Basal spacing values of Al13-Stv and CTA-Stv increased respectively from 13.5 A for natural stevensite to 17.5 and 17.6 A with increasing Al13(7+)/clay and CTA+/clay ratios. The DTA/TG results showed that Al13-Stv has a relatively high thermal stability compared with CTA-Stv. A quasi-irreversible intercalation by exchanging the interlayer inorganic cations with voluminous pillars Al13(7+) or CTA+ was observed. Batch adsorption of chromate anions from aqueous solutions was investigated and the results showed that both pillared clays had great affinity for the chromate compared with untreated stevensite. The Dubinin-Kaganer-Radushkevich (DKR) model was selected to describe the adsorption isotherms. The maximum adsorption capacities for natural stevensite, Al13-Stv and CTA-Stv are 13.7, 75.4 and 195.6 mmol/kg, respectively.

  7. Synthesis, characterization and biological applications of mycosynthesized silver nanoparticles.

    Science.gov (United States)

    Anbazhagan, Sathiyaseelan; Azeez, Shajahan; Morukattu, Girilal; Rajan, Ramachandran; Venkatesan, Kaviyarasan; Thangavelu, Kalaichelvan Puthupalayam

    2017-10-01

    Silver nanoparticles (AgNPs) have been known for their inhibitory and bactericidal effects. In the present study, less toxic AgNPs using Cunninghamella echinulata is reported for the first time. The obtained AgNPs were characterized using UV-Visible spectrophotometer, XRD, FT-IR, FE-SEM with EDAX and HR-TEM. AgNPs showed the maximum absorbance at 420-430 nm. The transmission electron micrograph revealed the formation of considerably uniform-sized AgNPs with an average size of 20-50 nm. The reducing and capping agents responsible for AgNP synthesis were identified by FT-IR. AgNP-incorporated cotton fabrics exhibited promising antibacterial activity against pathogenic bacteria. In addition, the in vitro cell viability of Vero cells (African green monkey kidney cells) was analyzed and the IC 50 value of AgNPs was found to be 62.8 µg/mL. Taken together, these results clearly reveal less toxic AgNPs which could be exploited for various biomedical applications.

  8. Synthesis and characterization of Ce doped MFI zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Kalita, Banani [Department of Chemistry, Gauhati University, Guwahati, Assam 781014 (India); Talukdar, Anup K., E-mail: anup_t@sify.com [Department of Chemistry, Gauhati University, Guwahati, Assam 781014 (India)

    2012-04-16

    Highlights: Black-Right-Pointing-Pointer Cerium was incorporated into the tetrahedral position of MFI zeolite structure. Black-Right-Pointing-Pointer Unit cell volume increases with an increase of Ce content in the framework of MFI. Black-Right-Pointing-Pointer A band at 310 nm in the UV-vis spectra indicates Ce incorporation in MFI structure. Black-Right-Pointing-Pointer The mass loss (%) in the region 373-423 K decreases with increase of Ce in MFI. - Abstract: Ce doped MFI (mobil five) zeolites with different Si to (Ce + Al) and different Ce to Al ratios were synthesized by a hydrothermal synthesis method. All the samples were characterized by different techniques such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), UV-vis diffuse reflectance spectroscopy (DRS) and scanning electron microscopy (SEM). The results showed that almost pure MFI phase was obtained in all cases with incorporation of cerium metal into the framework. The increase in unit cell parameters observed with an increase in Ce content is indicative of incorporation of Ce into the framework structure of microporous material MFI. Corroboration of the framework incorporation of Ce into the MFI zeolite structure was also obtained from the UV-vis DRS spectra by the presence of an absorption band at 280 nm. TGA and SEM of the samples provide complementary evidence for Ce incorporation into the framework MFI structure.

  9. Hydrothermal synthesis and characterization of zirconia based catalysts

    Science.gov (United States)

    Caillot, T.; Salama, Z.; Chanut, N.; Cadete Santos Aires, F. J.; Bennici, S.; Auroux, A.

    2013-07-01

    In this work, three equimolar mixed oxides ZrO2/CeO2, ZrO2/TiO2, ZrO2/La2O3 and a reference ZrO2 have been synthesized by hydrothermal method. The structural and surface properties of these materials have been fully characterized by X-ray diffraction, transmission electron microscopy, surface area measurement, chemical analysis, XPS, infrared spectroscopy after adsorption of pyridine and adsorption microcalorimetry of NH3 and SO2 probe molecules. All investigated mixed oxides are amphoteric and possess redox centers on their surface. Moreover, hydrothermal synthesis leads to catalysts with higher surface area and with better acid-base properties than classical coprecipitation method. Both Lewis and Brønsted acid sites are present on the surface of the mixed oxides. Compared to the other samples, the ZrO2/TiO2 material appears to be the best candidate for further application in acid-base catalysis.

  10. Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches

    Directory of Open Access Journals (Sweden)

    Xi-Feng Zhang

    2016-09-01

    Full Text Available Recent advances in nanoscience and nanotechnology radically changed the way we diagnose, treat, and prevent various diseases in all aspects of human life. Silver nanoparticles (AgNPs are one of the most vital and fascinating nanomaterials among several metallic nanoparticles that are involved in biomedical applications. AgNPs play an important role in nanoscience and nanotechnology, particularly in nanomedicine. Although several noble metals have been used for various purposes, AgNPs have been focused on potential applications in cancer diagnosis and therapy. In this review, we discuss the synthesis of AgNPs using physical, chemical, and biological methods. We also discuss the properties of AgNPs and methods for their characterization. More importantly, we extensively discuss the multifunctional bio-applications of AgNPs; for example, as antibacterial, antifungal, antiviral, anti-inflammatory, anti-angiogenic, and anti-cancer agents, and the mechanism of the anti-cancer activity of AgNPs. In addition, we discuss therapeutic approaches and challenges for cancer therapy using AgNPs. Finally, we conclude by discussing the future perspective of AgNPs.

  11. Synthesis and characterization of tricalcium phosphate ceramics doped with zinc

    International Nuclear Information System (INIS)

    Kai, K.C.; Marchi, J.; Ussui, V.; Bressiani, A.H.A.

    2011-01-01

    Due to its biocompatibility, the tricalcium phosphate (TCP) is used as a biomaterial for bone replacement and reconstruction. Zinc (Zn) can replace calcium in the crystal structure of TCP to be added in small quantities, can result in stimulatory effects on bone formation in vitro and in vivo. In this work, pure TCP and Zn-TCP, with general formula (Ca 1-x Zn x ) 3 (PO 4 ) 2 and 0 ≤ x ≤ 0.0225, were prepared by wet synthesis, from precursors Ca(OH) 2 , H 3 PO 4 and ZnO, after calcinated at 800 deg C and characterized by X-ray diffraction, specific surface area, agglomerate size distribution, differential thermal analysis and scanning electron microscopy. The results showed that the addition of small amounts of Zn resulted in TCP with suitable densification and higher specific surface area, may be promising as biomaterial due to the stimulatory effects of zinc associated with suitable mechanical properties of the final material. (author)

  12. Zinc impregnated cellulose nanocomposites: Synthesis, characterization and applications

    Science.gov (United States)

    Ali, Attarad; Ambreen, Sidra; Maqbool, Qaisar; Naz, Sania; Shams, Muhammad Fahad; Ahmad, Madiha; Phull, Abdul Rehman; Zia, Muhammad

    2016-11-01

    Nanocomposite materials have broad applicability due to synergistic effect of combined components. In present investigation, cellulose isolated from citrus peel waste is used as a supporting material; impregnation of zinc oxide nanoparticles via co-precipitation method. The characterization of nano composite is carried out through Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and Thermo-gravimetric analysis (TGA) resulting less than 10 μm cellulose fiber and approx. 50 nm ZnO NPs. Zinc oxide impregnated cellulose (ZnO-Cel) exhibited significant bacterial devastation property when compared to ZnO NPs or Cellulose via disc diffusion and colony forming unit methods. In addition, the ZnO-Cel exhibited significant total antioxidant, and minor DPPH free radical scavenging and total reducing power activities. The nano composite also showed time dependent increase in photocatalytic by effectively degrading methylene blue dye up to 69.5% under sunlight irradiation within 90 min. The results suggest effective utilization of cellulose obtained from citrus waste and synthesis of pharmacologically important nano-composites that can be exploited in wound dressing; defence against microbial attack and healing due to antioxidative property, furthermore can also be used for waste water treatment.

  13. Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches

    Science.gov (United States)

    Zhang, Xi-Feng; Liu, Zhi-Guo; Shen, Wei; Gurunathan, Sangiliyandi

    2016-01-01

    Recent advances in nanoscience and nanotechnology radically changed the way we diagnose, treat, and prevent various diseases in all aspects of human life. Silver nanoparticles (AgNPs) are one of the most vital and fascinating nanomaterials among several metallic nanoparticles that are involved in biomedical applications. AgNPs play an important role in nanoscience and nanotechnology, particularly in nanomedicine. Although several noble metals have been used for various purposes, AgNPs have been focused on potential applications in cancer diagnosis and therapy. In this review, we discuss the synthesis of AgNPs using physical, chemical, and biological methods. We also discuss the properties of AgNPs and methods for their characterization. More importantly, we extensively discuss the multifunctional bio-applications of AgNPs; for example, as antibacterial, antifungal, antiviral, anti-inflammatory, anti-angiogenic, and anti-cancer agents, and the mechanism of the anti-cancer activity of AgNPs. In addition, we discuss therapeutic approaches and challenges for cancer therapy using AgNPs. Finally, we conclude by discussing the future perspective of AgNPs. PMID:27649147

  14. Synthesis, characterization, applications, and challenges of iron oxide nanoparticles

    Directory of Open Access Journals (Sweden)

    Ali A

    2016-08-01

    Full Text Available Attarad Ali,1 Hira Zafar,1 Muhammad Zia,1 Ihsan ul Haq,2 Abdul Rehman Phull,3 Joham Sarfraz Ali,1 Altaf Hussain4 1Department of Biotechnology, 2Department of Pharmacy, Quaid-i-Azam University, Islamabad, Pakistan; 3Department of Biology, Kongju National University, Kongju, South Korea; 4Department of Materials Science and Engineering, Institute of Space Technology, Islamabad, Pakistan Abstract: Recently, iron oxide nanoparticles (NPs have attracted much consideration due to their unique properties, such as superparamagnetism, surface-to-volume ratio, greater surface area, and easy separation methodology. Various physical, chemical, and biological methods have been adopted to synthesize magnetic NPs with suitable surface chemistry. This review summarizes the methods for the preparation of iron oxide NPs, size and morphology control, and magnetic properties with recent bioengineering, commercial, and industrial applications. Iron oxides exhibit great potential in the fields of life sciences such as biomedicine, agriculture, and environment. Nontoxic conduct and biocompatible applications of magnetic NPs can be enriched further by special surface coating with organic or inorganic molecules, including surfactants, drugs, proteins, starches, enzymes, antibodies, nucleotides, nonionic detergents, and polyelectrolytes. Magnetic NPs can also be directed to an organ, tissue, or tumor using an external magnetic field for hyperthermic treatment of patients. Keeping in mind the current interest in iron NPs, this review is designed to report recent information from synthesis to characterization, and applications of iron NPs. Keywords: superparamagnetism, iron oxide nanoparticles, surfactants, hyperthermia, biodistribution, bioelimination

  15. Encapsulated Nanoparticle Synthesis and Characterization for Improved Storage Fluids: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Glatzmaier, G. C.; Pradhan, S.; Kang, J.; Curtis, C.; Blake, D.

    2010-10-01

    Nanoparticles are typically composed of 50--500 atoms and exhibit properties that are significantly different from the properties of larger, macroscale particles that have the same composition. The addition of these particles to traditional fluids may improve the fluids' thermophysical properties. As an example, the addition of a nanoparticle or set of nanoparticles to a storage fluid may double its heat capacity. This increase in heat capacity would allow a sensible thermal energy storage system to store the same amount of thermal energy in half the amount of storage fluid. The benefit is lower costs for the storage fluid and the storage tanks, resulting in lower-cost electricity. The goal of this long-term research is to create a new class of fluids that enable concentrating solar power plants to operate with greater efficiency and lower electricity costs. Initial research on this topic developed molecular dynamic models that predicted the energy states and transition temperatures for these particles. Recent research has extended the modeling work, along with initiating the synthesis and characterization of bare metal nanoparticles and metal nanoparticles that are encapsulated with inert silica coatings. These particles possess properties that make them excellent candidates for enhancing the heat capacity of storage fluids.

  16. Synthesis of type A zeolite from calcinated kaolin; Sintese de zeolita tipo A a partir de caulim calcinado

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, E.C.; Neves, R.F.; Souza, J.A.S. [Universidade Federal do Para (PPEQ/UFPA), Abaetetuba, PA (Brazil). Instituto de Engenharia Quimica. Programa de Pos-Graduacao; Moraes, C.G.; Macedo, E.N., E-mail: mersone7@yahoo.com.br [Universidade Federal do Para (PRODERNA/UFPA), Abaetetuba, PA (Brazil). Programa de Pos-Graduacao em Engenharia de Recursos Naturais da Amazonia

    2011-07-01

    The mineral production has caused great concern in environmental and industrial scenario due to the effects caused to the environment. The industries of processing kaolin for paper are important economically for the state of Para, but produce huge quantities of tailings, which depend on large areas to be stocked. This material is rich in silico-aluminates can be recycled and used as raw material for other industries. The objective is to synthesize zeolite A at different temperatures of calcination and synthesis. The starting materials and synthesis of zeolite A have been identified and characterized through analysis of X-ray diffraction (DRX) and scanning electron microscopy (MEV). The synthesis process of zeolite A, using as source of silica and the aluminum metakaolin, which was calcined at temperatures of 700 ° C and 800 ° C for 2 hours of landing in a burning furnace type muffle. Observed in relation to the calcination of kaolin as the main phase, the metakaolin. This is just a removal of water from its structure, so we opted for the lower temperature, less energy consumption. The synthesis process of zeolite A, produced good results for the formation of zeolites type A, which were characterized with high purities. (author)

  17. Novel bio-based epoxy-polyurethane materials from modified vegetable oils – synthesis and characterization

    Directory of Open Access Journals (Sweden)

    A. Sienkiewicz

    2017-04-01

    Full Text Available Presented research shows the results of a study on mechanical properties of materials obtained in the course of innovatory application of epoxidized vegetable oil in the synthesis of new bio-based epoxy resins, crosslinked with curing agents which are not typical for epoxy materials. The product was obtained via modern and pro-ecological modification of a well-known synthesis method of epoxies, namely the epoxy fusion process, then it was crosslinked using polyisocyanates of different structure: toluene-2,4-diisocyanate (TDI, hexamethylene diisocyanate (HDI and 4,4’-methylene diphenyl diisocyanate (MDI. The obtained epoxy-polyurethane materials are characterized by various mechanical properties, which depend on the type of chosen isocyanate. Compositions based on HDI exhibit better mechanical characteristics than elastic polyurethane materials based on hydroxylated soybean oil. Materials cured with aromatic isocyanates MDI and TDI are characterized by higher mechanical resistance comparable with cast polyurethane based on petrochemical resources. Epoxy fusion product cured with toluene-2,4-diisocyanate in a presence of Dabco T9 appears to have the best mechanical properties among all tested compositions.

  18. Synthesis and characterization of perovskite-type La1-yCayMn1-xB″xO3±δ nanomaterials (B″ = Ni, Fe; x = 0.2, 0.5; y = 0.4, 0.25)

    Science.gov (United States)

    Franke, Daniela; Trots, Dmytro; Vasylechko, Leonid; Vashook, Vladimir; Guth, Ulrich

    2018-02-01

    Perovskite-type nanomaterials of the compositions La1-yCayMn1-xB″xO3±δ with B'' = Ni, Fe; x = 0.2, 0.5 and y = 0.4, 0.25 were prepared using two different preparation routes (synthesis by precipitation and the PVA/sucrose method) at 500 °C-700 °C. The calcined products of the syntheses were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and physisorption measurements. The materials from the PVA/sucrose method contain particles with diameters from 33 nm to 48 nm, generate specific surface areas up to 33 m2/g and form pure compared to 45 nm-93 nm and up to 18 m2/g from precipitation method which contain a significant amount of sodium ions. The agglomeration process was analyzed for one nanomaterial (B'' = Fe, x = 0.2, y = 0.4) from the PVA/sucrose method using temperature dependent XRD showing only a slight growth (4.3%) of nanoparticles at 600 °C. The materials from the PVA/sucrose method turned out to be more suitable as electrode materials in electrochemical applications (SOFC, sensors) because of smaller particle sizes, higher specific surface areas and purity.

  19. Second harmonic chalcone crystal: Synthesis, growth and characterization

    Energy Technology Data Exchange (ETDEWEB)

    D' Silva, E.D., E-mail: deepak.dsilva@gmail.co [Department of studies in Physics, Mangalore University, Mangalagangotri, Mangalore 574199 (India); Narayan Rao, D. [School of Physics, University of Hyderabad, Hyderabad 500046 (India); Philip, Reji [Light and Matter Physics Group, Raman Research Institute, Bangalore 560080 (India); Butcher, Ray J. [Department of Chemistry, Howard University, Washington, DC 20059 (United States); Rajnikant [Department of Physics and Electronics, University of Jammu, Jammu Tawi 180006 (India); Dharmaprakash, S.M. [Department of studies in Physics, Mangalore University, Mangalagangotri, Mangalore 574199 (India)

    2011-05-15

    The novel nonlinear optical chalcone derivative (2E)-3-[4-(methylsulfanyl)phenyl]-1-(3-bromophenyl)prop-2-en-1-one (3Br4MSP) crystals have been grown by slow evaporation technique at ambient temperature. The crystal was subjected to different types of characterization method in order to study its possible application in nonlinear optics. The structure determination of the grown crystal was done by single crystal X-ray diffraction study. The morphology of the crystal is studied. The crystal was subjected to thermal analysis to find its thermal stability. The grown crystals were characterized for their optical transmission and mechanical hardness. The second harmonic generation (SHG) efficiency of the crystal is obtained by classical powdered technique. The laser damage threshold for 3Br4MSP crystal was determined using Q-switched Nd:YAG laser.

  20. Electrochemical synthesis and characterization of copper (I) oxide

    OpenAIRE

    Bugarinović Sanja J.; Grekulović Vesna J.; Rajčić-Vujasinović Mirjana M.; Stević Zoran M.; Stanković Zvonimir D.

    2009-01-01

    The quest and need for clean and economical energy sources have increased interest in the development of thin film cells technologies. Electrochemical deposition is an attractive method for synthesis of thin films. It offers the advantages of low synthesis temperature, low cost and high purity. Copper (I) oxide or cuprous oxide is an oxide semiconductor which is used as the anodic material in the form of thin film in lithium batteries and solar cells. The cathodic process of synthesis of cupr...

  1. Synthesis and characterization of low-dimensional molecular magnetic materials

    Science.gov (United States)

    Liu, Chen

    This dissertation presents experimental results from the synthesis and structural, magnetic characterization of representative low-dimensional molecule-based magnetic materials. Most of the materials reported in this dissertation, both coordination polymers and cuprate, are obtained as the result of synthesizing and characterizing spin ladder systems; except the material studied in Chapter 2, ferricenyl(III)trisferrocenyl(II)borate, which is not related to the spin ladder project. The interest in spin ladder systems is due to the discovery of high-temperature superconductivity in doped cuprates possessing ladder-like structures, and it is hoped that investigation of the magnetic behavior of ladder-like structures will help us understand the mechanism of high-temperature superconductivity. Chapter 1 reviews fundamental knowledge of molecular magnetism, general synthetic strategies for low-dimensional coordination polymers, and a brief introduction to the current status of research on spin ladder systems. Chapter 2 presents a modified synthetic procedure of a previously known monomeric complex, ferricenyl(III)trisferrocenyl(II)borate, 1. Its magnetic properties were characterized and previous results have been disproved. Chapter 3 investigates the magnetism of [CuCl2(CH3CN)] 2, 2, a cuprate whose structure consists of isolated noninterpenetrating ladders formed by the stacking of Cu(II) dimers. This material presents an unexpected ferromagnetic interaction both within the dimeric units and between the dimers, and this behavior has been rationalized based on the effect of its terminal nonbridging ligands. In Chapter 4, the synthesis and magnetism of two ladder-like coordination polymers, [Co(NO3)2(4,4'-bipyridine) 1.5(MeCN)]n, 3, and Ni2(2,6-pyridinedicarboxylic acid)2(H2O)4(pyrazine), 4, are reported. Compound 3 possesses a covalent one-dimensional ladder structure in which Co(II) ions are bridged through bipyridine molecules. Compared to the materials discussed in

  2. Preparation and characterization of aminobenzyl cellulose by two step synthesis from native cellulose

    Science.gov (United States)

    Synthesis and structural characterizations of nitro- and amino-benzyl cellulose were carried out. Cellulose derivatives were synthesized by etherification. Nitrobenzylation produced 80% yield by treating a mixture of microcrystalline cellulose, 4-dimethyl aminopyridine and 4-nitrobenzyl chloride at ...

  3. Synthesis, characterization and the release kinetics of antiproliferative agents from polyamidoamine conjugates

    CSIR Research Space (South Africa)

    Aderibigbe, BA

    2015-01-01

    Full Text Available of Microencapsulation: Micro and Nano Carriers Synthesis, characterization and the release kinetics of antiproliferative agents from polyamidoamine conjugates B. A. Aderibigbea, E. R. Sadikub, S. S. Rayc, X. Y. Mbiandad, M. C. Fotsingd, J. Jayaramuduc & S. J...

  4. Synthesis and characterization of the cyanobenzene-ethylenedithio-TTF donor

    Directory of Open Access Journals (Sweden)

    Sandrina Oliveira

    2015-06-01

    Full Text Available A dissymmetric TTF-type electron donor, cyanobenzene-ethylenedithio-tetrathiafulvalene (CNB-EDT-TTF, was obtained in high yield, by a cross-coupling reaction with triethyl phosphite between 2-thioxobenzo[d][1,3]dithiole-5-carbonitrile and 5,6-dihydro-[1,3]dithiolo[4,5-b][1,4]dithiin-2-one. This new donor was characterized namely by single crystal X-ray diffraction, cyclic voltammetry, NMR, UV-visible and IR spectroscopy.

  5. Characterization of WbiQ: An α1,2-fucosyltransferase from Escherichia coli O127:K63(B8), and synthesis of H-type 3 blood group antigen

    International Nuclear Information System (INIS)

    Pettit, Nicholas; Styslinger, Thomas; Mei, Zhen; Han, Weiqing; Zhao, Guohui; Wang, Peng George

    2010-01-01

    Research highlights: → WbiQ is an α1,2-fucosyltransferase from Escherichia coli O127. → WbiQ demonstrates strict substrate specificity for the Gal-β1,3-GalNAc acceptor. → WbiQ was used to synthesize milligram scale of the H-type 3 blood group antigen. -- Abstract: Escherichia coli O127:K63(B8) possesses high human blood group H (O) activity due to its O-antigen repeating unit structure. In this work, the wbiQ gene from E. coli O127:K63(B8) was expressed in E. coli BL21 (DE3) and purified as a fusion protein containing an N-terminal GST affinity tag. Using the GST-WbiQ fusion protein, the wbiQ gene was identified to encode an α1,2-fucosyltransferase using a radioactivity based assay, thin-layer chromatography assay, as well confirming product formation by using mass spectrometry and NMR spectroscopy. The fused enzyme (GST-WbiQ) has an optimal pH range from 6.5 to 7.5 and does not require the presence of a divalent metal to be enzymatically active. WbiQ displays strict substrate specificity, displaying activity only towards acceptors that contain Gal-β1,3-GalNAc-α-OR linkages; indicating that both the Gal and GalNAc residues are vital for enzymatic activity. In addition, WbiQ was used to prepare the H-type 3 blood group antigen, Fuc-α1,2-Gal-β1,3-GalNAc-α-OMe, on a milligram scale.

  6. Low Temperature Solid-State Synthesis and Characterization of LaBO3

    Directory of Open Access Journals (Sweden)

    Azmi Seyhun KIPÇAK

    2016-11-01

    Full Text Available Rare earth (lanthanide series borates, possess high vacuum ultraviolet (VUV transparency, large electronic band gaps, chemical and environmental stability and exceptionally large optical damage thresholds and used in the development of plasma display panels (PDPs. In this study the synthesis of lanthanum borates via solid-state method is studied. For this purpose, lanthanum oxide (La2O3 and boric acid (H3BO3 are used for as lanthanum and boron sources, respectively. Different elemental molar ratios of La to B (between 3:1 to 1:6 as La2O3:H3BO3 were reacted by solid-state method at the reaction temperatures between 500°C - 700°C with the constant reaction time of 4 h. Following the synthesis, characterizations of the synthesized products are conducted by X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FT-IR, Raman spectroscopy and scanning electron microscope (SEM. From the results of the experiments, three types of lanthanum borates of; La3BO6, LaBO3 and La(BO23 were observed at different reaction parameters. Among these three types of lanthanum borates LaBO3 phase were obtained as a major phase.

  7. Synthesis, characterization, and reactivity of pentamethylcyclopentadienyl complexes of divalent cobalt and nickel

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Michael Edward [Univ. of California, Berkeley, CA (United States)

    1993-10-01

    The thesis is divided into the following 4 chapters: synthesis, characterization, and reactivity of trinuclear pentamethylcyclopentadienyl cobalt and nickel clusters with triply-bridging methylidyne groups; chemical and physical properties of pentamethylcyclopentadienyl acetylacetonate complexes of Co(II) and Ni(II); synthesis, characterization, and reactivity of pentamethylcyclopentadienyl halide complexes of Co and Ni; and crystallographic studies of distortions in metallocenes with C5-symmetrical cyclopentadienyl rings.

  8. Synthesis and characterization of magnetite nanoparticles from mineral magnetite

    International Nuclear Information System (INIS)

    Morel, Mauricio; Martínez, Francisco; Mosquera, Edgar

    2013-01-01

    We have synthesized magnetite nanoparticles with sizes that range from 20 to 30 nm from mineral magnetite roughly 45 μm in size. The procedure consists in the dissolution of the mineral in an acidic medium and subsequent precipitation in a basic medium in the presence of oleic acid. Two experiments were conducted in different gaseous environments. The first was carried out in an environment exposed to air (M1) and the second in an N 2 (M2) environment. The x-ray diffraction results showed a slight difference, which corresponds to the surface oxidation of magnetite. The sizes of the modified nanoparticles were determined through the Scherrer equation and transmission electron microscopy. An organic material mass loss corresponding to 18% was observed through a thermogravimetric analysis. The Fourier transform infrared spectroscopic analysis provides information about the type of bond that is formed on the surface of the nanoparticle, which corresponds to a bidentate chelate. The vibrating sample magnetometer results show a superparamagnetic behavior for sample M1. - Highlights: • A new method for synthesis of nanoparticles from mineral microparticles. • Search agreggate value to the mineral by mean nanoscience. • The stoichiometric ratio of the ions Fe 2+ and Fe 3+ from the mineral magnetite is synergistic

  9. Synthesis and characterization of solid solutions in ABCO 4 system

    Science.gov (United States)

    Novoselov, A.; Zimina, G.; Komissarova, L.; Pajaczkowska, A.

    2006-01-01

    Formation of continuous solid solutions with a tetragonal structure of K 2NiF 4-type was investigated by direct solid-state synthesis, carbonate precipitations, the freeze-drying method and the Czochralski crystal growth technique. In the systems of SrLaAlO 4-CaLaAlO 4, SrNdAlO 4-CaNdAlO 4, SrPrAlO 4-CaPrAlO 4, SrLaAlO 4-SrLaGaO 4 and SrLaAlO 4-SrLaFeO 4 solid solutions are formed in the whole concentration range (0.0⩽ x⩽1.0) and in the systems of SrLaAlO 4-SrLaMnO 4 and SrLaAlO 4-SrLaCrO 4 in the limited compositional interval of (0.0⩽ x⩽0.20) and (0.0⩽ x⩽0.25), respectively, with composition dependency of lattice constants following Vegard's law.

  10. Synthesis, Characterization and Biological Activity Studies of Mixed ...

    African Journals Online (AJOL)

    ADOWIE PERE

    is due to the coordination of the metal to the ligand by some complexes through this site. Cobalt and. Nickel complexes of the 3 mmol synthesis with. Nickel complex of the 5mmol synthesis still retain the band as seen in Paracetamol showing that they do not coordinate through this site. Another important band was observed ...

  11. SYNTHESIS, CHARACTERIZATION AND BIO-ACTIVITY OF SOME ...

    African Journals Online (AJOL)

    Preferred Customer

    Organophosphorus compounds have wide range of applications in the industrial, agricultural and medicinal chemistry owing to their unique physicochemical and biological properties. Their utility as reagents and potential synthons in organic synthesis is gaining increased attention [1]. Synthesis of a-aminophosphonates, ...

  12. Synthesis and characterization of metal oxide nanorod brushes

    Indian Academy of Sciences (India)

    WINTEC

    ducing chromium ions during the synthesis of alumina rods. Keywords. Metal oxide nanorods; nanorod brushes; alumina nanorods; MoO3 nanorods; ZnO nanorods; ruby nanorods. 1. Introduction. Synthesis of one-dimensional metal oxide nanostructures is getting enormous attention in recent years due to their potential ...

  13. Synthesis and characterization of core–shell magnetic molecularly ...

    Indian Academy of Sciences (India)

    Abstract. In this study, simple, effective and general processes were used for the synthesis of a new nano- molecularly imprinted polymers (MIPs) layer on magnetic Fe3O4 nanoparticles (NPs) with uniform core–shell struc- ture by combining surface imprinting and nanotechniques. The first step for the synthesis of magnetic ...

  14. Synthesis and characterization of new homologous series of ...

    Indian Academy of Sciences (India)

    ease of synthesis and their excellent mesomorphic behaviour. The isoxazole ring incorporates a strong. ∗ .... Synthesis of unsymmetrical liquid crystalline compounds. 69. Table 1. Elemental analysis for chalcone (series I) ..... oxadiazole/Thiadiazole heterocyclic rings containing. Liquid Crystals J. Chem. Sci. 127 1831. 14.

  15. Synthesis and characterization of core–shell magnetic molecularly ...

    Indian Academy of Sciences (India)

    In this study, simple, effective and general processes were used for the synthesis of a new nanomolecularly imprinted polymers (MIPs) layer on magnetic Fe3O4 nanoparticles (NPs) with uniform core–shell structure by combining surface imprinting and nanotechniques. The first step for the synthesis of magnetic NPs was ...

  16. Synthesis and Characterization of Silver Nanoparticles for an Undergraduate Laboratory

    Science.gov (United States)

    Orbaek, Alvin W.; McHale, Mary M.; Barron, Andrew R.

    2015-01-01

    The aim of this simple, quick, and safe laboratory exercise is to provide undergraduate students an introduction to nanotechnology using nanoparticle (NP) synthesis. Students are provided two procedures that allow for the synthesis of different yet controlled sizes of silver NPs. After preparing the NPs, the students perform UV-visible…

  17. Synthesis, characterization of bay-substituted perylene diimide based D-A-D type small molecules and their applications as a non-fullerene electron acceptor in polymer solar cells

    Directory of Open Access Journals (Sweden)

    Ramasamy Ganesamoorthy

    2018-03-01

    Full Text Available We report a series of bay substituted perylene diimide based donor-acceptor-donor (D-A-D type small molecule acceptor derivatives such as S-I, S-II, S-III and S-IV for small molecule based organic solar cell (SM-OSC applications. The electron rich thiophene derivatives such as thiophene, 2-hexylthiophene, 2,2′-bithiophene, and 5-hexyl-2,2′-bithiophene were used as a donor (D, and perylene diimide was used as an acceptor (A. The synthesized small molecules were confirmed by FT-IR, NMR, and HR-MS. The small molecules showed wide and strong absorption in the UV-vis region up to 750 nm, which reduced the optical band gap to <2 eV. The calculated highest occupied molecular orbital (HOMO and the lowest unoccupied molecular orbital (LUMO were comparable with those of the PC61BM. Scanning electron microscope (SEM studies confirmed the aggregation of the small molecules, S-I to S-IV. Small molecules showed thermal stability up to 300 °C. In bulk heterojunction organic solar cells (BHJ-OSCs, the S-I based device showed a maximum power conversion efficiency (PCE of 0.12% with P3HT polymer donor. The PCE was declined with respect to the number of thiophene units and the flexible alkyl chain in the bay position. Keywords: Perylene diimide, Donor–acceptor, Small molecule, Non-fullerene, Suzuki coupling

  18. Synthesis, characterization and antimicrobial activity of some novel benzimidazole derivatives.

    Science.gov (United States)

    Krishnanjaneyulu, Immadisetty Sri; Saravanan, Govindaraj; Vamsi, Janga; Supriya, Pamidipamula; Bhavana, Jarugula Udaya; Sunil Kumar, Mittineni Venkata

    2014-01-01

    A series of novel N-((1H-benzoimidazol-1-yl) methyl)-4-(1-phenyl-5-substituted-4, 5-dihydro-1-benzoimidazol-1-yl) methyl)-4-(1-phenyl-5-substituted-4, 5-dihydro-1H-pyrazol-3-yl) benzenamine were synthesized by treating various 1-(4-((1H-benzoimidazol-1-yl) methylamino) phenyl)-3-substitutedprop-2-en-1-one with phenyl hydrazine in the presence of sodium acetate through a simple ring closure reaction. The starting material, 1-(4-((1H-benzoimidazol-1-yl) methylamino) phenyl)-3-substitutedprop-2-en-1-one,-benzoimidazol-1-yl) methylamino) phenyl)-3-substitutedprop-2-en-1-one, was synthesized from o-phenylenediamine by a multistep synthesis. All the synthesized compounds were characterized by spectroscopic means and elemental analyses. The title compounds were investigated for in vitro antibacterial and antifungal properties against some human pathogenic microorganisms by employing the agar streak dilution method using Ciprofloxacin and Ketoconazole as standard drugs. All title compounds showed activity against the entire strains of microorganism. Structural activity relationship studies reveal that compounds possessing an electron-withdrawing group display better activity than the compounds containing electron-donating groups, whereas the unsubstituted derivatives display moderate activity. Based on the results obtained, N-((1H-benzoimidazol-1-yl) methyl)-4-(1-phenyl-5-(4-(trifluoromethyl) phenyl)-4,5-dihydro-1H-pyrazol-3-yl) benzenamine 5i was found to be very active compared with the rest of the compounds and standard drugs that were subjected to antimicrobial assay.

  19. Synthesis and characterization of magnetite/PLGA/chitosan nanoparticles

    International Nuclear Information System (INIS)

    Ibarra, Jaime; Melendres, Julio; Almada, Mario; Juárez, Josué; Valdez, Miguel A; Burboa, María G; Taboada, Pablo

    2015-01-01

    In this work, we report the synthesis and characterization of a new hybrid nanoparticles system performed by magnetite nanoparticles, loaded in a PLGA matrix, and stabilized by different concentrations of chitosan. Magnetite nanoparticles were hydrophobized with oleic acid and entrapped in a PLGA matrix by the emulsion solvent evaporation method, after that, magnetite/PLGA/chitosan nanoparticles were obtained by adding dropwise magnetite/PLGA nanoparticles in chitosan solutions. Magnetite/PLGA nanoparticles produced with different molar ratios did not show significant differences in size and the 3:1 molar ratio showed best spherical shapes as well as uniform particle size. Isothermal titration calorimetry studies demonstrated that the first stage of PLGA-chitosan interaction is mostly regulated by electrostatic forces. Based on a single set of identical sites model, we obtained for the average number of binding sites a value of 3.4, which can be considered as the number of chitosan chains per nanoparticle. This value was confirmed by using a model based on the DLVO theory and fitting zeta potential measurements of magnetite/PLGA/chitosan nanoparticles. From the adjusted parameters, we found that an average number of chitosan molecules of 3.6 per nanoparticle are attached onto the surface of the PLGA matrix. Finally, we evaluated the effect of surface charge of nanoparticles on a membrane model of endothelial cells performed by a mixture of three phospholipids at the air–water interface. Different isotherms and adsorption curves show that cationic surface of charged nanoparticles strongly interact with the phospholipids mixture and these results can be the basis of future experiments to understand the nanoparticles- cell membrane interaction. (paper)

  20. Synthesis and characterization of magnetite/PLGA/chitosan nanoparticles

    Science.gov (United States)

    Ibarra, Jaime; Melendres, Julio; Almada, Mario; Burboa, María G.; Taboada, Pablo; Juárez, Josué; Valdez, Miguel A.

    2015-09-01

    In this work, we report the synthesis and characterization of a new hybrid nanoparticles system performed by magnetite nanoparticles, loaded in a PLGA matrix, and stabilized by different concentrations of chitosan. Magnetite nanoparticles were hydrophobized with oleic acid and entrapped in a PLGA matrix by the emulsion solvent evaporation method, after that, magnetite/PLGA/chitosan nanoparticles were obtained by adding dropwise magnetite/PLGA nanoparticles in chitosan solutions. Magnetite/PLGA nanoparticles produced with different molar ratios did not show significant differences in size and the 3:1 molar ratio showed best spherical shapes as well as uniform particle size. Isothermal titration calorimetry studies demonstrated that the first stage of PLGA-chitosan interaction is mostly regulated by electrostatic forces. Based on a single set of identical sites model, we obtained for the average number of binding sites a value of 3.4, which can be considered as the number of chitosan chains per nanoparticle. This value was confirmed by using a model based on the DLVO theory and fitting zeta potential measurements of magnetite/PLGA/chitosan nanoparticles. From the adjusted parameters, we found that an average number of chitosan molecules of 3.6 per nanoparticle are attached onto the surface of the PLGA matrix. Finally, we evaluated the effect of surface charge of nanoparticles on a membrane model of endothelial cells performed by a mixture of three phospholipids at the air-water interface. Different isotherms and adsorption curves show that cationic surface of charged nanoparticles strongly interact with the phospholipids mixture and these results can be the basis of future experiments to understand the nanoparticles- cell membrane interaction.

  1. Synthesis and characterization of Ti–Ta–Nb–Mn foams

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar, C., E-mail: claudio.aguilar@usm.cl [Departamento de Ingeniería Metalúrgica y Materiales, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Guerra, C. [Departamento de Ingeniería Metalúrgica y Materiales, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Lascano, S. [Departamento de Ingeniería Mecánica, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Guzman, D. [Departamento de Metalurgia, Universidad de Atacama, Av. Copayapu 485, Copiapó (Chile); Rojas, P.A. [Escuela de Ingeniería Mecánica, Facultad de Ingeniería, Pontificia Universidad Católica de Valparaíso, Av. Los Carrera, 01567 Quilpué (Chile); Thirumurugan, M. [Departamento de Ingeniería Metalúrgica y Materiales, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso (Chile); Bejar, L.; Medina, A. [Universidad Michoacana de San Nicolás de Hidalgo, Ciudad Universitaria, Morelia, Michoacán (Mexico)

    2016-01-01

    The unprecedented increase in human life expectancy have produced profound changes in the prevailing patterns of disease, like the observed increased in degenerative disc diseases, which cause degradation of the bones. Ti–Nb–Ta alloys are promising materials to replace the damaged bone due to their excellent mechanical and corrosion resistance properties. In general metallic foams are widely used for medical application due to their lower elastic moduli compare to bulk materials. In this work we studied the synthesis of 34Nb–29Ta–xMn (x: 2, 4 and 6 wt.% Mn) alloy foams (50% v/v) using ammonium hydrogen carbonate as a space holder. Alloys were produced through mechanical alloying in a planetary mill for 50 h. Green compacts were obtained by applying 430 MPa pressure. To remove the space holder from the matrix the green compacts were heated to 180 °C for 1.5 h and after sintered at 1300 °C for 3 h. Foams were characterized by x-ray diffraction, scanning, transmission electron microscopy and optical microscopy. The elastic modulus of the foam was measured as ~ 30 GPa, and the values are almost equal to the values predicted using various theoretical models. - Highlights: • Metallic foams of Ti–34Nb–29Ta–xMn (x: 2, 4 and 6 wt.% Mn) alloys were synthetized. • The macro and micro pore produced have sizes smaller than 600 and 20 μm, respectively. • The macro and micro pores shows good characteristics to cell adhesion and bone ingrowth. • Elastic properties were comparable to that exhibited by cortical bone.

  2. Synthesis and characterization of nanoparticles capped with medicinal plant extracts

    Science.gov (United States)

    Rekulapally, Sujith R.

    In this study, synthesis, characterization and biological application of series nanometal (silver, Ag) and nanometal oxide (titania, TiO2) were carried out. These nanomaterials were prepared using wet-chemistry method and then coated using natural plant extract. Three medicinal plants, namely Zingiber officinale (Ginger), Allium sativum (Garlic) and Capsicum annuum (Chili) were chosen as grafting agent to decrease the side-effects and increase the efficiency of NPs towards living organism. Extraction conditions were controlled under 60-100 °C for 8 hrs. Ag and TiO2 NPs were fabricated using colloidal chemistry and variables were controlled at ambient condition. The band gap of TiO2 NPs used as disinfectant was also modified through coating the medicinal plant extracts. The medicinal plant extracts and coated NPs were measured using spectroscopic methods. Ultraviolet-visible spectra indicated the Ag NPs were formed. The peak at 410 nm resulted from the electrons transferred from their ground to the excited state. The broadened full width at half maximum (FWHM) suggested the ultrafine particles were obtained. The lipid soluble compounds, phenols, tri-terpenoids, flavanoids, capsaicinoids, flavonoids, carotenoids, steroids steroidal glycosides, and vitamins were determined from the high performance liquid chromatographical analyses. X-ray powder diffraction indicated that the face-centered cubic Ag (PDF: 00-004-0783, a = 4.0862A, a = 90°) and anatase TiO2 (PDF: 01-08-1285, a = 3.7845, c = 9.5143A, a = 90°) were obtained using colloidal chemistry. Bactericidal activity indicated that these core-shelled TiO 2 were effective (MBC=0.6 ppm, within 30 mins) at inactivating Gram-positive and Gram-negative bacteria. It is proposed that the medicinal extracts enhanced the potency of NPs against bacteria. From our previous study, the Ag NPs were highly effective at inactivating both bacteria.

  3. Synthesis, characterization and antimicrobial activity of some novel benzimidazole derivatives

    Directory of Open Access Journals (Sweden)

    Immadisetty Sri Krishnanjaneyulu

    2014-01-01

    Full Text Available A series of novel N-((1H-benzoimidazol-1-yl methyl-4-(1-phenyl-5-substituted-4, 5-dihydro-1-benzoimidazol-1-yl methyl-4-(1-phenyl-5-substituted-4, 5-dihydro-1H-pyrazol-3-yl benzenamine were synthesized by treating various 1-(4-((1H-benzoimidazol-1-yl methylamino phenyl-3-substitutedprop-2-en-1-one with phenyl hydrazine in the presence of sodium acetate through a simple ring closure reaction. The starting material, 1-(4-((1H-benzoimidazol-1-yl methylamino phenyl-3-substitutedprop-2-en-1-one,-benzoimidazol-1-yl methylamino phenyl-3-substitutedprop-2-en-1-one, was synthesized from o-phenylenediamine by a multistep synthesis. All the synthesized compounds were characterized by spectroscopic means and elemental analyses. The title compounds were investigated for in vitro antibacterial and antifungal properties against some human pathogenic microorganisms by employing the agar streak dilution method using Ciprofloxacin and Ketoconazole as standard drugs. All title compounds showed activity against the entire strains of microorganism. Structural activity relationship studies reveal that compounds possessing an electron-withdrawing group display better activity than the compounds containing electron-donating groups, whereas the unsubstituted derivatives display moderate activity. Based on the results obtained, N-((1H-benzoimidazol-1-yl methyl-4-(1-phenyl-5-(4-(trifluoromethyl phenyl-4,5-dihydro-1H-pyrazol-3-yl benzenamine 5i was found to be very active compared with the rest of the compounds and standard drugs that were subjected to antimicrobial assay.

  4. Design and synthesis of ruthenium(II) OCO pincer type NHC ...

    Indian Academy of Sciences (India)

    Design and synthesis of ruthenium(II) OCO pincer type NHC complexes and their catalytic role towards the synthesis of ... of generation of vacant coordination site and cataly- tically active species. It was naturally obvious that ..... The NHC proligand 1,3-bis(3,5-di-tert-butyl-2-hydro- xyphenyl)imidazolinium chloride (HL) was ...

  5. Synthesis, Characterization (Molecular-Morphological) and Theoretical Morphology Predictions of Poly(cyclohexadiene) Containing Linear Triblock Terpolymers

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Rajeev [ORNL; Dadmun, Mark D [ORNL; Sumpter, Bobby G [ORNL; Mays, Jimmy [ORNL; Avgeropoulos, Apostolos [University of Athens, Athens, Greece; Zafeiropoulos, N.E. [University of Athens, Athens, Greece; Misichoronis, K. [University of Athens, Athens, Greece; Rangou, S. [University of Athens, Athens, Greece; Ashcraft, E. [University of Tennessee, Knoxville (UTK)

    2013-01-01

    The synthesis via anionic polymerization of six linear triblock terpolymers with various sequences of blocks such as PS (polystyrene), PB (polybutadiene), PI (polyisoprene) and PCHD (poly(1,3-cyclohexadiene)) is reported. The synthesis of the terpolymers was accomplished by the use of anionic polymerization with high vacuum techniques and sequential monomer addition. Molecular characterization of the samples was performed via size exclusion chromatography and membrane osmometry to measure polydispersity indices and the number-average molecular weights, respectively. Proton nuclear magnetic resonance spectroscopy was adopted to verify the type of microstructure for the polydienes as well as to calculate the molar composition. Structural characterization was performed via transmission electron microscopy and small angle X-ray scattering and several morphologies were observed including one which has not been reported previously. Real-space self-consistent field theory (SCFT) without a priori knowledge about the symmetry of the periodic structures was used to elucidate the thermodynamics of the synthesized triblock copolymers.

  6. Synthesis and characterization of high-temperature ceramic YBCO nanostructures prepared from a novel precursor

    Directory of Open Access Journals (Sweden)

    M. Salavati-Niasari

    2011-01-01

    Full Text Available As a new precursor, [tris(2-hydroxyacetophenato triaqua(III], [Y(HAP3(H2O3]; complex was used in thermal decomposition process for the synthesis of rod-like high-temperature ceramic YBCO with length of about 320-350 nm and diameters 60–90 nm. The as-synthesized products were characterized by XRD, FT-IR, TEM, SEM and EDX analyses. The results showed that by using fine raw materials, the calcination temperature can be reduced to 870 ºC. It was found that this type of precursor have clearly effects on the size and morphology of product because the organic ligands around yttrium center act like a protecting agent to prevent agglomeration.

  7. Bio-inspired synthesis and characterization of superparamagnetic particles; Sintese e caracterizacao bioinspirada de particulas superparamagneticas

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Vinicius F., E-mail: vfc_mg@yahoo.com.br [Universidade Federal de Itajuba (UNIFEI), MG (Brazil); Queiroz, Alvaro A.A. [Universidade Federal de Itajuba (UNIFEI), MG (Brazil). Centro de Estudos e Inovacao em Materiais Biofuncionais Avancados

    2012-08-15

    This paper discusses the bio-inspired synthesis of type YFeAl ferrites encapsulated into polyglycerol dendrimers (PGLD) generation 3. The structure and morphological properties of the system YFeAl/PGLD was characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The magnetic properties were studied through the techniques of Moessbauer spectroscopy and magnetization. The cytotoxicity of the nanoparticles encapsulated in dendrimers PGLD G3 at the cell membrane was studied against mammalian cell line CHO.K1 measuring the amount of lactate dehydrogenase (LDH) released by the cell damage. Microscopy TEM and XRD analysis indicate that spherical nanoparticles were obtained highly crystalline and monodisperse with size 20 nm

  8. Synthesis and characterization of thorium(IV) and uranium(IV) complexes with Schiff bases

    Energy Technology Data Exchange (ETDEWEB)

    Radoske, Thomas; Maerz, Juliane; Kaden, Peter; Patzschke, Michael; Ikeda-Ohno, Atsushi [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Chemistry of the F-Elements

    2017-06-01

    We report herein the synthesis and characterization of several imine complexes of tetravalent thorium (Th(IV)) and uranium (U(IV)). The ligands investigated in this study are a Schiff base type, including the well-known salen ligand (H{sub 2}Le, Fig. 1). The complexation in solution was investigated by NMR measurements indicating paramagnetic effects of unpaired f-electrons of U(IV) on the ligand molecule. We also determined the solid-state molecular structures of the synthesized complexes by single crystal X-ray diffraction. The synthesized complexes show an eight-fold coordination geometry around the actinide center surrounded by two tetradentate ligands with 2N- and 2O-donor atoms.

  9. Synthesis of organometallic hydroxides of titanium, vanadium, cobalt and chromium as precursors of thin films type MaOb

    International Nuclear Information System (INIS)

    Montero Villalobos, Mavis

    2001-01-01

    This study shows the results obtained from a general objective that was the synthesis and characterization of precursors of thin films of metallic oxides, two different routes of synthesis have been practiced: route molecular precursors and route Sol-Gel technic. In the first route one of the objectives of the investigation is to obtain a molecular precursor of material type M a O b a route of synthesis have been tried proved that involves anhydrous chlorides of the transition metals and linked R that are alcoxides of metal such as silicon, titanium and zirconium. In the second route the general objective to create thin films of metallic oxide has been maintained but the way to resolve the problem has changed, not giving so much emphasis to the molecular precursors as it was originally presented (this due mainly to its instability and difficulty of synthesis), but being supported in the sun-gel chemistry. It was started a new synthesis line through the sun-gel chemistry that is more versatile and simplifies the process in the film formation [es

  10. Facile synthesis of B-type carbonated nanoapatite with tailored microstructure

    Energy Technology Data Exchange (ETDEWEB)

    Gualtieri, Magdalena Lassinantti, E-mail: magdalena.gualtieri@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Romagnoli, Marcello, E-mail: marcello.romagnoli@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Hanuskova, Miriam, E-mail: Miriam.hanuskova@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Fabbri, Elena, E-mail: Elena.fabbri@unimore.it [Dipartimento Ingegneria “Enzo Ferrari”, Università degli studi di Modena e Reggio Emilia, I-41125 Modena (Italy); Gualtieri, Alessandro F., E-mail: Alessandro.gualtieri@unimore.it [Dipartimento di Scienze Chimiche e Geologiche, Università degli studi di Modena e Reggio Emilia, I-41121 Modena (Italy)

    2014-12-15

    Nanolime and a phosphate-based chelating agent were used to synthesize B-type carbonated apatite. Developed Rietveld refinement strategies allowed one to determine process yield, product crystallinity as well as structural (unit cell) and microstructural (size, strain) parameters. The effect of synthesis temperature (20–60 °C) as well as Ca/P ratio (1.5–2.5) and solid content (10–30 wt%) of the starting batch on these properties were investigated. FTIR, TEM and gas adsorption data provided supporting evidence. The process yield was 42–60 wt% and found to be governed by the Ca/P ratio. The purified products had high specific surface area (107–186 m{sup 2}/g) and crystallinity (76–97%). The unit cell parameters, correlated to the degree of structural carbonate, were sensitive to the Ca/P ratio. Instead, temperature governed the microstructural parameters. Less strained and larger crystals were obtained at higher temperatures. Long-term aging up to 6 months at 20 °C compensated for higher crystal growth kinetics at higher temperature. - Graphical abstract: Controlled synthesis of carbonated apatite at moderate temperatures using nanolime and sodiumhexametaphosphate as starting reagent. - Highlights: • Chemical synthesis of nano-sized apatite with tailored microstructure was performed. • Colloidal Ca(OH){sub 2} and a phosphorus-based chelating agents were used as reagents. • The method is simple and reproducible which facilitate industrial process scale-up. • Rietveld refinement strategies for product characterization were developed. • Rietveld analyses provided yield, microstructural and structure information.

  11. Facile synthesis of B-type carbonated nanoapatite with tailored microstructure

    International Nuclear Information System (INIS)

    Gualtieri, Magdalena Lassinantti; Romagnoli, Marcello; Hanuskova, Miriam; Fabbri, Elena; Gualtieri, Alessandro F.

    2014-01-01

    Nanolime and a phosphate-based chelating agent were used to synthesize B-type carbonated apatite. Developed Rietveld refinement strategies allowed one to determine process yield, product crystallinity as well as structural (unit cell) and microstructural (size, strain) parameters. The effect of synthesis temperature (20–60 °C) as well as Ca/P ratio (1.5–2.5) and solid content (10–30 wt%) of the starting batch on these properties were investigated. FTIR, TEM and gas adsorption data provided supporting evidence. The process yield was 42–60 wt% and found to be governed by the Ca/P ratio. The purified products had high specific surface area (107–186 m 2 /g) and crystallinity (76–97%). The unit cell parameters, correlated to the degree of structural carbonate, were sensitive to the Ca/P ratio. Instead, temperature governed the microstructural parameters. Less strained and larger crystals were obtained at higher temperatures. Long-term aging up to 6 months at 20 °C compensated for higher crystal growth kinetics at higher temperature. - Graphical abstract: Controlled synthesis of carbonated apatite at moderate temperatures using nanolime and sodiumhexametaphosphate as starting reagent. - Highlights: • Chemical synthesis of nano-sized apatite with tailored microstructure was performed. • Colloidal Ca(OH) 2 and a phosphorus-based chelating agents were used as reagents. • The method is simple and reproducible which facilitate industrial process scale-up. • Rietveld refinement strategies for product characterization were developed. • Rietveld analyses provided yield, microstructural and structure information

  12. Directing factors affecting the synthesis of a MFI-type zeolite

    International Nuclear Information System (INIS)

    Vinaches, P.; Pergher, S.B.C.; Lopes, C.W.; Gomez-Hortiguela, L.; Finger, P.H.; Silva, B.A. da; Dallago, R.M.; Mignoni, M.L.

    2016-01-01

    Full text: Zeolites are crystalline tectosilicates constituted by (TO4) tetrahedra connected through the oxygens of their vertices. The importance of these materials is that their properties differ, due to their variable compositions and structures, leading to the possibility of applying them into different industries, for example, as catalyst in petroleum industry or sensors in quality control. One of the big questions in this area is about the understanding of the chemistry that directs to one or another type of zeolite. Another important question is the search of new zeolitic structures for new applications. One approach to answer both is the study of the structure-directing agents, which are inorganic or organic molecules used in the synthesis of zeolites. New and already-used molecules have been studied within different synthesis conditions and different techniques, as characterization or computational studies. And several attempts of rationalization were and, still, will be performed. In this research, an imidazolium-based compound was studied in hydrothermal zeolite synthesis as organic structure-directing agent (OSDA). The products were obtained with Si/Al or Si/(Al+Zn) compositions, proved by ICP data. X-ray diffractograms showed two different zeolitic types: MFI and TON. It was observed that when Zn was present in the synthesis gel, pure MFI phases were able to appear. But in his absence, the products were all mixtures of MFI and TON zeolites. It was also possible to distinguish both phases by SEM micrographs, as MFI had brick-like shape and TON appeared as needles. The obtained zeolites were stable until 900°C minimum, as tested by a TG/DTG/DSC experiment. To prove that the chosen OSDA directed these structures, a CHN analysis was performed, resulting in integrity of the molecules inside the zeolitic pores and cavities. Finally, a rationale about the location and conformation of the OSDA was needed to understand these experimental results. So, it was

  13. Directing factors affecting the synthesis of a MFI-type zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Vinaches, P.; Pergher, S.B.C. [Universidade Federal de Rio Grande do Norte (UFRN), RN (Brazil); Lopes, C.W. [Institute of Chemical Technology, Mumbai (India); Gomez-Hortiguela, L. [Instituto de Catalisis y Petroleoquimica, Madrid (Spain); Finger, P.H.; Silva, B.A. da; Dallago, R.M.; Mignoni, M.L. [Universidade Regional Integrada do Alto Uruguai e das Missoes (URI), Erechim, RS (Brazil)

    2016-07-01

    Full text: Zeolites are crystalline tectosilicates constituted by (TO4) tetrahedra connected through the oxygens of their vertices. The importance of these materials is that their properties differ, due to their variable compositions and structures, leading to the possibility of applying them into different industries, for example, as catalyst in petroleum industry or sensors in quality control. One of the big questions in this area is about the understanding of the chemistry that directs to one or another type of zeolite. Another important question is the search of new zeolitic structures for new applications. One approach to answer both is the study of the structure-directing agents, which are inorganic or organic molecules used in the synthesis of zeolites. New and already-used molecules have been studied within different synthesis conditions and different techniques, as characterization or computational studies. And several attempts of rationalization were and, still, will be performed. In this research, an imidazolium-based compound was studied in hydrothermal zeolite synthesis as organic structure-directing agent (OSDA). The products were obtained with Si/Al or Si/(Al+Zn) compositions, proved by ICP data. X-ray diffractograms showed two different zeolitic types: MFI and TON. It was observed that when Zn was present in the synthesis gel, pure MFI phases were able to appear. But in his absence, the products were all mixtures of MFI and TON zeolites. It was also possible to distinguish both phases by SEM micrographs, as MFI had brick-like shape and TON appeared as needles. The obtained zeolites were stable until 900°C minimum, as tested by a TG/DTG/DSC experiment. To prove that the chosen OSDA directed these structures, a CHN analysis was performed, resulting in integrity of the molecules inside the zeolitic pores and cavities. Finally, a rationale about the location and conformation of the OSDA was needed to understand these experimental results. So, it was

  14. Synthesis and characterization of some new molybdenum(V) complexes

    International Nuclear Information System (INIS)

    Kamenar, Boris; Korpar-Choling, Branka; Cindrich, Marina; Matkovich-Chalogovich, Dubravka; Penavich, Maja

    1997-01-01

    The molybdenium(V) complexes of the types Mo 2 O 3 L 4 (L = acetylacetone or dibenzolymethane), Mo 2 O 4 L 2 L' 2 solvated with L' (L = dibenzolymethane, L' = morpholine or thiomorpholine), and NR-morphH)[Mo 8 O 2 0LL' 3 ] (R = methyl or ethyl, L = dibenzolymethane, L' = NR-morpholine) have been synthesized for the first time. All were characterized by chemical analyses, IR spectra and magnethochemical measurements. Crystal structure of [Mo 2 O 4 (dbm) 2 (morph) 2 ].(morph) has been determined by X-ray diffraction technique. Complex is dinuclear containing the molybdenium atoms in a distorted octahedral geometry. Each molybdenium atom is surrounded by two bridging oxo-oxygen atoms, two oxygen atoms from one bidentately coordinated dibenzolymethane ligand, one nitrogen atom from morpholine molecule and one terminal oxo-oxygen atom. The solvated morpholine molecule is disordered around the diad axis. (author)

  15. Synthesis and Characterization of Silicon Nanowires by Electroless Etching

    Science.gov (United States)

    Bhujel, Rabina; Rizal, Umesh; Agarwal, Amit; Swain, Bhabani S.; Swain, Bibhu P.

    2018-02-01

    Silicon nanowires (SiNWs) were synthesized by two-step electroless etching of p-type Si (100) wafer and characterized by field emission scanning electron microscopy, UV-Vis spectroscopy, x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The vibrational signature at 1108 and 2087 cm-1 confirmed SiNWs were passivated by both oxygen and hydrogen atoms. Raman peak at 517 cm-1 indicated crystalline SiNWs with tailing toward redshift due to Fano effect. The Si(2p) and Si(2s) core orbital spectra of SiNWs were found at 99.8 and 150.5 eV, respectively. Moreover, the reflection of SiNWs is minimized to 1 to 5% in the 650-nm wavelength.

  16. SYNTHESIS, CHARACTERIZATION AND CRYSTAL STRUCTURE OF BIS-(2-HYDROXYBENZALDEHYDEDIAMINOGUANIZONE

    Directory of Open Access Journals (Sweden)

    Diana Dragancea, Vladimir B. Arion, Sergiu Shova

    2008-12-01

    Full Text Available The new ligand, bis(2-hydroxybenzaldehydediaminoguanizone (1 has been synthesized and characterized by elemental analysis, IR and 1H NMR spectroscopies. The crystal structure of the compound was determined by X-ray diffraction. The ligand C15H15N5O2·C2H5OH crystallizes in the monoclinic space group P21/c with unit cell parameters a = 8.9102(3, b = 10.0357(3, c = 19.7618(6 Å, β = 98.385(2°, Z = 4, V = 1748.21(9 Å3, R1 = 0.040. The amino form of the ligand adopts a planar conformation stabilized by two intramolecular hydrogen bonds of the type O–H···N, in which the H atoms of the central amino group are directed to the lone-pair regions of the azomethine nitrogen atoms.

  17. Synthesis, characterization and thermal behavior of rare earth amido sulfonates

    International Nuclear Information System (INIS)

    Luiz, Jose Marques; Nunes, Ronaldo Spezia; Matos, Jivaldo do Rosario

    2013-01-01

    Hydrated compounds prepared in aqueous solution by reaction between amidosulfonic acid [H 3 NSO 3 ] and suspensions of rare earth hydroxycarbonates [Ln 2 (OH) x (CO 3 ) y .zH 2 O] were characterized by elemental analysis (% Ln, % N and % H), infrared spectroscopy (FTIR) and thermogravimetry (TG). The compounds presented the stoichiometry Ln(NH 2 SO 3 ) 3 .xH 2 O (where x = 1, 5, 2.0 or 3.0). The IR spectra showed absorptions characteristic of H 2 O molecules and NH 2 SO 3 groups. Degree of hydration, thermal decomposition steps and formation of stable intermediates of the type [Ln 2 (SO 4 ) 3 ] and (Ln 2 O 2 SO 4 ), besides formation of their oxides, was determined by thermogravimetry. (author)

  18. Combustion synthesis and characterization of nanocrystalline WO3.

    Science.gov (United States)

    Morales, Walter; Cason, Michael; Aina, Olawunmi; de Tacconi, Norma R; Rajeshwar, Krishnan

    2008-05-21

    The energy payback time associated with the semiconductor active material is an important parameter in a photovoltaic solar cell device. Thus lowering the energy requirements for the semiconductor synthesis step or making it more energy-efficient is critical toward making the overall device economics more competitive relative to other nonpolluting energy options. In this communication, combustion synthesis is demonstrated to be a versatile and energy-efficient method for preparing inorganic oxide semiconductors such as tungsten trioxide (WO3) for photovoltaic or photocatalytic solar energy conversion. The energy efficiency of combustion synthesis accrues from the fact that high process temperatures are self-sustained by the exothermicity of the combustion process, and the only external thermal energy input needed is for dehydration of the fuel/oxidizer precursor mixture and bringing it to ignition. Importantly, we show that, in this approach, it is also possible to tune the optical characteristics of the oxide semiconductor (i.e., shift its response toward the visible range of the electromagnetic spectrum) in situ by doping the host semiconductor during the formative stage itself. As a bonus, the resultant material shows enhanced surface properties such as markedly improved organic dye uptake relative to benchmark samples obtained from commercial sources. Finally, this synthesis approach requires only very simple equipment, a feature that it shares with other "mild" inorganic semiconductor synthesis routes such as sol-gel chemistry, chemical bath deposition, and electrodeposition. The present study constitutes the first use of combustion synthesis for preparing WO3 powder comprising nanosized particles.

  19. Particle synthesis, characterization, and properties of filled polymer systems

    Science.gov (United States)

    Kohls, Douglas J.

    This dissertation presents results on the reinforcement of an elastomer system using different types of fillers and comparing the resulting mechanical properties of compounds made with these fillers. The analytic approach uses two classical models with which fillers are thought to reinforce elastomers. The first mechanism being based on filler structure while the second involves the interaction of the filler with an elastomer. Two new types of fillers are investigated: a fumed silica-carbon composite and a layered silicate. These fillers are compounded into elastomers using formulations that are standard in the tire industry for tire tread compounds. This work builds off of previous studies that use techniques such as microscopy and gas adsorption to characterize filler structure by adding the use of small-angle x-ray scattering to characterize fillers based on three structural levels. Classical rubber elasticity principles with recent fractal model analysis are used to describe how the structural levels of the fillers relate to elastomer reinforcement. Analysis of the SAXS data gives information about the size of the primary particle and of the aggregate formed by these primary particles. It is found, through analyzing the SAXS data, that the ratio of these two structural sizes gives the degree of aggregation or the number of particles in an aggregate. The measurement and analysis of the degree of aggregation and how it correlates with measured mechanical properties of compounds is presented in this dissertation. The results from the USAXS and the mechanical testing of elastomers showed that the degree of aggregation, z, helps to identify what is a 'reinforcing' filler. Higher degree of aggregation correlated with better mechanical properties. While other studies have shown the effects of surface modifications, filler concentration, and surface area, the studies in this dissertation conclude that the degree of aggregation is an important parameter that can predict

  20. Synthesis and Characterization of Hydroxyapatite Powder by Wet Precipitation Method

    Science.gov (United States)

    Cahyaningrum, S. E.; Herdyastuty, N.; Devina, B.; Supangat, D.

    2018-01-01

    Hydroxyapatite is main inorganic component of the bone with formula Ca10(PO4)6(OH)2. Hydroxyapatite can be used as substituted bone biomaterial because biocompatible, non toxic, and osteoconductive. In this study, hydroxyapatite is synthesized using wet precipitation method from egg shell. The product was sintered at different temperatures of 800°C to 1000°C to improve its crystallinity. The hydroxyapatite was characterized by X-ray analysis, Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) to reveal its phase content, morphology and types of bond present within it. The analytical results showed hydroxyapatite had range in crystallinity from 85.527 to 98.753%. The analytical functional groups showed that presence of functional groups such as OH, (PO4)3 2‑, and CO3 2‑ that indicated as hydroxyapatite. The result of characterization SEM indicated that hydroxyapatite without sintering and HAp sintering at 800 °C were irregular shape without pore. The best hydroxyapatite with temperature sintering at 900 °C showed oval shaped with pores without agglomerated.

  1. SYNTHESIS AND CHARACTERIZATION OF POLYIMIDE-ZEOLITE MIXED MATRIX MEMBRANE

    Directory of Open Access Journals (Sweden)

    Budiyono Budiyono

    2012-02-01

    Full Text Available Biogas has become an attractive alternative energy source due to the limitation of energy from fossil. In this study, a new type of mixed matrix membrane (MMM consisting of polyimide-zeolite was synthesized and characterized for biogas purification. The MMM consists of medium concentration of polymer (20% wt polyimide, 80% N-Methyl-2-pyrrolidone (NMP and 25% zeolite 4A in total solid were prepared by a dry/wet phase inversion technique.  The fabricated MMM was characterized using SEM, DSC, TGA and gas permeation. Post treatment coating procedure was also conducted. The research showed that surface coating by 3% silicone rubber toward MMM PI 20% gave the significant effect to improve membrane selectivity. The ideal selectivity for CO2/CH4 separation increased from 0.99 for before coating to 7.9 after coating for PI-Zeolite MMM, respectively. The results suggest that PI-Zeolite MMM with good post treatment procedure will increase the membrane selectivity and permeability with more saver polymer requirement as well as energy saving due to low energy for mixing.

  2. Synthesis and characterization of pyrochlore-type yttrium titanate ...

    Indian Academy of Sciences (India)

    Subramanian et al 1983). Mostly, A is a trivalent rare-earth ion, but can also be a mono-, divalent cation, and. B may be 3d, 4d or 5d transition elements having an appro- priate oxidation state required for charge balance to give rise to the composition, ...

  3. Synthesis, characterization and oxide ionic conductivity of β-type ...

    Indian Academy of Sciences (India)

    increasingly important for applications in energy conversion, chemical processing, sensing and ... Structural disorder during transformation may also contribute to the improve- ment of ionic conductivity. The β → δ phase transition for pure β-Bi2O3 at a temperature of about 660–670. ◦. C has been reported using DTA thermal ...

  4. Synthesis and characterization of type solid solution in the binary ...

    Indian Academy of Sciences (India)

    Author Affiliations. O Turkoglu1 M Soylak1 I Belenli2. Department of Chemistry, Faculty of Art and Science, Erciyes University, 38039 Kayseri, Turkey; Department of Physics, Faculty of Art and Science, Erciyes University, 38039 Kayseri, Turkey ...

  5. Synthesis, characterization and oxide ionic conductivity of β-type ...

    Indian Academy of Sciences (India)

    heating rate in air. The electrical conductivity of β-Bi2O3 doped with 1–8 mole% Yb2O3 increased with increasing temperature up to ∼659. ◦. C. Beyond this temperature con- ductivity increased sharply up to about 681. ◦. C. The reason for the sharp increase in conductivity was the phase transi- tion and an alteration in the ...

  6. Synthesis and characterization of Ruddlesden–Popper (RP) type ...

    Indian Academy of Sciences (India)

    Administrator

    Lee J Y, Swinnea J S, Steinfink H, Reiff W M,. Pei S and Jorgensen J D 1993 J. Solid State Chem. 103 1. 12. Mahesh R, Mahendiran R, Raychaudhuri A K and. Rao C N R 1996 J. Solid State Chem. 122 448. 13. Briceno G. Chang H, Sun X, Schultz P G and Xiang. X D 1995 Science 270 273. 14. Zhang R L, Zhao B C, Song ...

  7. Fuel type characterization based on coarse resolution MODIS satellite data

    Directory of Open Access Journals (Sweden)

    Lanorte A

    2007-01-01

    Full Text Available Fuel types is one of the most important factors that should be taken into consideration for computing spatial fire hazard and risk and simulating fire growth and intensity across a landscape. In the present study, forest fuel mapping is considered from a remote sensing perspective. The purpose is to delineate forest types by exploring the use of coarse resolution satellite remote sensing MODIS imagery. In order to ascertain how well MODIS data can provide an exhaustive classification of fuel properties a sample area characterized by mixed vegetation covers and complex topography was analysed. The study area is located in the South of Italy. Fieldwork fuel type recognitions, performed before, after and during the acquisition of remote sensing MODIS data, were used as ground-truth dataset to assess the obtained results. The method comprised the following three steps: (I adaptation of Prometheus fuel types for obtaining a standardization system useful for remotely sensed classification of fuel types and properties in the considered Mediterranean ecosystems; (II model construction for the spectral characterization and mapping of fuel types based on two different approach, maximum likelihood (ML classification algorithm and spectral Mixture Analysis (MTMF; (III accuracy assessment for the performance evaluation based on the comparison of MODIS-based results with ground-truth. Results from our analyses showed that the use of remotely sensed MODIS data provided a valuable characterization and mapping of fuel types being that the achieved classification accuracy was higher than 73% for ML classifier and higher than 83% for MTMF.

  8. A new Cd (II)-containing ionic liquid: Synthesis, characterization and ...

    Indian Academy of Sciences (India)

    The present work reports on the synthesis, characterization and performance of a new metal-containing ionic liquid [(C4H9)2-bta][(C4H9-bta)CdCl3] (bta = benzotriazole) as electrocatalyst for hydrogen peroxide reduction. The structure of the Cd(II)-containing ionic liquid (Cd-IL) has been characterized by X-ray ...

  9. Synthesis and characterization of polymer matrix nanocomposites and their components

    Science.gov (United States)

    Burnside, Shelly Dawn

    Herein we present synthesis schemes and characterization results for polymer matrix nanocomposite reinforced with organically modified layered silicates. These host materials with ultrafine dimensions are promising candidates for polymer and have been previously shown to yield substantial property enhancements at low silicate loadings due to their extreme geometry. Siloxane nanocomposites with a variety of nanostructures were formed. Thermal stability, solvent uptake and moduli of the nanocomposites were explores. Exfoliated nanocomposites displayed enhanced properties when compared to unreinforced siloxanes, and at lower volume fraction filler than in conventional composites. Large amounts of bound polymer, polymer affected by the silicate, were found in exfoliated nanocomposites as a result of the extreme geometry of the layered silicate. This bound polymer was related to the dramatic property enhancements in the nanocomposites. The behavior of these nanocomposites is compared to behavior expected from traditional models developed for conventional composites and model elastomeric networks. A lightly brominated polymer has been intercalated into a single crystal of organically exchanged vermiculite. The intercalation was followed using x-ray diffraction by monitoring the gallery height of the vermiculite host. Rutherford Backscattering Spectroscopy, used to confirm polymer intercalation, showed a constant bromine content in the direction normal to the layers. Atomic Force Microscopy images of a cleaved polymer-intercalated crystal showed raised hemispheres on an otherwise flat background. The hemispheres consist of single chains or aggregates of 3-40 polymer chains resulting from relaxations following cleaving. Three component or Hansen solubility parameters (delta) of organically modified layered silicates, the reinforcing agent in polymer matrix nanocomposites presented herein, have been determined. Two experimental techniques, temporal turbidimetry and

  10. Transition metal borides. Synthesis, characterization and superconducting properties

    International Nuclear Information System (INIS)

    Kayhan, Mehmet

    2013-01-01

    A systematic study was done on the synthesis and superconducting properties of metal rich transition metal borides. Five different binary systems were investigated including the boride systems of niobium, tantalum, molybdenum, tungsten and rhenium. High temperature solid state methods were used in order to synthesize samples of different transition metal borides of the composition M 2 B, MB, M 3 B 2 , MB 2 , and M 2 B 4 . The reactions were carried out in three different furnaces with different sample containers: the electric arc (copper crucible), the high frequency induction furnace (boron nitride, tantalum or glassy carbon crucibles), and the conventional tube furnace (sealed evacuated quartz ampoules). The products obtained were characterized with X-ray powder diffractometry, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Phase analyses and crystal structure refinements using the Rietveld method and based on structure models known from literature were performed. A neutron diffraction measurement was done for W 2 B 4 to allow for a complete crystal structure determination, because of the presence of a heavy element like tungsten and a light element like boron that made it difficult to determine the accurate determination of the boron atom positions and occupancies from X-ray data. A new structure model for W 2 B 4 was proposed. Magnetic measurements in a SQUID magnetometer down to temperatures as low as 1.8 K were performed to several of the products in order to see if the transition metal borides become superconducting at low temperatures, and the results were compared with data from literature. Superconducting properties were found for the following compounds: NbB 2 (T C = 3.5 K), β-MoB (T C = 2.4 K), β-WB (T C = 2.0 K), α-WB (T C = 4.3 K), W 2 B 4 (T C = 5.4 K), Re 7 B 3 (T C = 2.4 K). A relationship between the superconducting properties and the compositional and structural features was discussed for metal diborides. Also it was

  11. Synthesis by plasma and characterization of compounds derived from polyacetylene

    International Nuclear Information System (INIS)

    Vasquez O, M.

    2004-01-01

    This work presents a study on, the synthesis by plasma and the characterization of an aliphatic conjugated polymer, polyacetylene-chlorinated (Pac), and two aromatic polymers, Poly pyrrole (P Py-Cl) and Poly thiophene (Pth-Cl) synthesized with chlorine and the electrical conductivity. The last two polymers were synthesized to compare the chlorine-polymer interaction in aliphatic and aromatic polymers synthesized by plasma and their repercussion on the electrical transport of charges in the material. The structure and morphology of the polymers were studied using scanning electron microscopy (Sem), energy dispersive spectroscopy (EDS), infrared spectroscopy (Ft-IR), conductivity analysis and X-Ray photon spectroscopy (XPS). The results showed that Pac is soluble in acetone and other organic solvents, which indicates a low proportion of crosslinking in the polymers. This point is important because the crosslinking reduces the electrical conductivity in the material. The Pac conductivity is in the range of 1 x 10 -12 to 6 x 10 -4 S/cm in the internal of 35- 90% of relative humidity. A possible mechanism for the transport of electrical charges in Pac is by means of the double and simple conjugated bonds in the polymers. Pth-Cl and P Py-Cl present electric conductivity in the interval of 9 x 10 -5 to 1 x 10 -2 S/cm and show a great dependence on the relative humidity. The chlorine addition in these polymers was through simultaneous polymerization with chloroform. This last compound can decompose if the energy of the plasma is relatively high, and the fragments can link to the polymer in a hybrid process of copolymerization. An important point of this work is that the polymer is soluble, a difference of the obtained via plasma as the poli aniline, P Py-CI and Pth-Cl both studied in this work. If took in account that the Pac is single the monomer and that P Py-Cl and Pth-CI is affected by the chlorine that modifies the conductivity of the material, then Pac presents an

  12. The Synthesis, Characterization and Catalytic Reaction Studies of Monodisperse Platinum Nanoparticles in Mesoporous Oxide Materials

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, Robert M. [Univ. of California, Berkeley, CA (United States)

    2006-01-01

    A catalyst design program was implemented in which Pt nanoparticles, either of monodisperse size and/or shape were synthesized, characterized and studied in a number of hydrocarbon conversion reactions. The novel preparation of these materials enables exquisite control over their physical and chemical properties that could be controlled (and therefore rationally tuned) during synthesis. The ability to synthesize rather than prepare catalysts followed by thorough characterization enable accurate structure-function relationships to be elucidated. This thesis emphasizes all three aspects of catalyst design: synthesis, characterization and reactivity studies. The precise control of metal nanoparticle size, surface structure and composition may enable the development of highly active and selective heterogeneous catalysts.

  13. Synthesis and characterization of polyaniline-hexaferrite composites

    Energy Technology Data Exchange (ETDEWEB)

    Khursheed, Tooba [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Islam, M.U., E-mail: dr.misbahulislam@bzu.edu.pk [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Asif Iqbal, M. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); College of E & ME, National University of Science and Technology, Islamabad (Pakistan); Ali, Irshad, E-mail: irshadalibzu@gmail.com [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Shakoor, Abdul [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Awan, M.S. [Center for Micro and Nano Devices Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan); Iftikhar, Aisha [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Azhar Khan, Muhammad [Department of Physics, The Islamia University of Bahawalpur, Bahawalpur 63100 (Pakistan); Naeem Ashiq, Muhammad [Institute of Chemical Science, Bahauddin Zakariya University, Multan 60800 (Pakistan)

    2015-11-01

    Polyaniline was synthesized by chemical polymerization using aniline as monomer, and Y-type hexaferrite with composition (Co{sub 2}Mn{sub 2}Sr{sub 1.66}Nd{sub 0.4}Fe{sub 10}O{sub 22}) was prepared by co-precipitation assisted by surfactant. Three composites of Polyaniline with different ferrite ratios were prepared by mechanical blending. The synthesized samples were characterized by X-Ray diffraction, Scanning electron microscopy and electrical measurements. The XRD analysis reveals that no second phase was observed in Y-type hexagonal ferrite. In PANI-Ferrite composites, significant changes in resistivity, real and imaginary part of complex permittivity were observed with the increase of ferrite in the polyaniline matrix. At low frequencies the magnitude of dielectric constant and complex permittivity is high with few relaxation peaks. AC conductivity of PANI-Ferrite composites increase with the increase of frequency following Jonscher law. The resistivity and activation energy were found to show similar behavior. - Highlights: • Co{sub 2}Mn{sub 2}Sr{sub 1.66}Nd{sub 0.4}Fe{sub 10}O{sub 22} was prepared by co-precipitation. • Polyaniline was synthesized by chemical polymerization. • AC conductivity increase with the increase of frequency. • The resistivity and activation energy were found to show similar behavior.

  14. Designing Selectivity in Metal-Semiconductor Nanocrystals: Synthesis, Characterization, and Self-Assembly

    Science.gov (United States)

    Pavlopoulos, Nicholas George

    This dissertation contains six chapters detailing recent advances that have been made in the synthesis and characterization of metal-semiconductor hybrid nanocrystals (HNCs), and the applications of these materials. Primarily focused on the synthesis of well-defined II-VI semiconductor nanorod (NR) and tetrapod (TP) based constructs of interest for photocatalytic and solar energy applications, the research described herein discusses progress towards the realization of key design rules for the synthesis of functional semiconductor nanocrystals (NCs). As such, a blend of novel synthesis, advanced characterization, and direct application of heterostructured nanoparticles are presented. The first chapter is a review summarizing the design, synthesis, properties, and applications of multicomponent nanomaterials composed of disparate semiconductor and metal domains. By coupling two compositionally distinct materials onto a single nanocrystal, synergistic properties can arise that are not present in the isolated components, ranging from self-assembly to photocatalysis. For semiconductor nanomaterials, this was first realized in the ability to tune nanomaterial dimensions from 0-D quantum dot (QD) structures to cylindrical (NR) and branched (TP) structures by exploitation of advanced colloidal synthesis techniques and understandings of NC facet reactivities. The second chapter is focused on the synthesis and characterization of well-defined CdSe-seeded-CdS (CdSe CdS) NR systems synthesized by overcoating of wurtzite (W) CdSe quantum dots with W-CdS shells. 1-dimensional NRs have been interesting constructs for applications such as solar concentrators, optical gains, and photocatalysis. Through synthetic control over CdSe CdS NR systems, materials with small and large CdSe seeds were prepared, and for each seed size, multiple NR lengths were prepared. Through transient absorption studies, it was found that band alignment did not affect the efficiency of charge localization

  15. Synthesis, characterization and mechanistic insights of mycogenic iron oxide nanoparticles

    Science.gov (United States)

    Bhargava, Arpit; Jain, Navin; Barathi L., Manju; Akhtar, Mohd. Sayeed; Yun, Yeoung-Sang; Panwar, Jitendra

    2013-11-01

    In the present study, extracellular synthesis of iron oxide nanoparticles (IONPs) was achieved using Aspergillus japonicus isolate AJP01. The isolate demonstrated its ability to hydrolyze the precursor salt solution, a mixture of iron cyanide complexes, under ambient conditions. Hydrolysis of these complexes released ferric and ferrous ions, which underwent protein-mediated coprecipitation and controlled nucleation resulting in the formation of IONPs. Transmission electron microscopy, selected area electron diffraction pattern, energy dispersive spectroscopy and grazing incidence X-ray diffraction analysis confirmed the mycosynthesis of IONPs. The synthesized particles were cubic in shape with a size range of 60-70 nm with crystal structure corresponding to magnetite. Scanning electron microscopy analysis revealed the absence of IONPs on fungal biomass surface, indicating the extracellular nature of synthesis. Fourier transform infrared spectroscopy confirmed the presence of proteins on as-synthesised IONPs, which may confer their stability. Preliminary investigation indicated the role of proteins in the synthesis and stabilization of IONPs. On the basis of present findings, a probable mechanism for synthesis of IONPs is suggested. The simplicity and versatility of the present approach can be utilized for the synthesis of other nanomaterials.

  16. Synthesis and application of branched type II arabinogalactans

    DEFF Research Database (Denmark)

    Andersen, Mathias Christian Franch; Boos, Irene; Ruprecht, Colin

    2017-01-01

    The synthesis of linear- and (1→6)-branched β-(1→3)-D-galactans, structures found in plant arabinogalactan proteins (AGPs) is described. The synthetic strategy relies on iterative couplings of mono- and disaccharide thioglycoside donors, followed by a late stage glycosylation of heptagalactan...

  17. Synthesis and properties of heterocyclic type I photoinitiators

    International Nuclear Information System (INIS)

    Liska, R.; Knaus, S.; Wendrinsky, J.

    1999-01-01

    The synthesis and properties of a series of new heterocyclic hydroxyalkylphenone-analogous photoinitiators (PIs) is described. The PIs are obtained by reaction of aromatic organolithium compounds with nitriles or by Friedel-Craft's-acylation. Preliminary photocalorimetric tests and UV absorption data are included

  18. Interpretation of stream programs: characterizing type 2 polynomial time complexity

    OpenAIRE

    Férée , Hugo; Hainry , Emmanuel; Hoyrup , Mathieu; Péchoux , Romain

    2010-01-01

    International audience; We study polynomial time complexity of type 2 functionals. For that purpose, we introduce a first order functional stream language. We give criteria, named well-founded, on such programs relying on second order interpretation that characterize two variants of type 2 polynomial complexity including the Basic Feasible Functions (BFF). These charac- terizations provide a new insight on the complexity of stream programs. Finally, we adapt these results to functions over th...

  19. ATP synthesis is impaired in isolated mitochondria from myotubes established from type 2 diabetic subjects

    DEFF Research Database (Denmark)

    Minet, Ariane D; Gaster, Michael

    2010-01-01

    obese and eight subjects with type 2 diabetes precultured under normophysiological conditions. Furthermore, mitochondria were isolated and ATP production was measured by luminescence at baseline and during acute insulin stimulation with or without concomitant ATP utilization by hexokinase. Mitochondrial...... mass and the ATP synthesis rate, neither at baseline nor during acute insulin stimulation, were not different between groups. The ratio of ATP synthesis rate at hexokinase versus ATP synthesis rate at baseline was lower in diabetic mitochondria compared to lean mitochondria. Thus the lower content...... of muscle mitochondria in type 2 diabetes in vivo is an adaptive trait and mitochondrial dysfunction in type 2 diabetes in vivo is based both on primarily impaired ATP synthesis and an adaptive loss of mitochondrial mass....

  20. Geoelectric characterization of Aquifer types in the basement ...

    African Journals Online (AJOL)

    Geoelectric characterization of Aquifer types in the basement complex terrain of parts of Osun state,Nigeria. S Bayode, JS Ojo, MO Olorunfemi. Abstract. No Abstract. Global Journal of Pure and Applied Sciences Vol. 12(3) 2006: 377-385. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT ...

  1. Synthesis and Characterization of Pine Needles Reinforced RF Matrix Based Biocomposites

    OpenAIRE

    Singha, A. S.; Thakur, Vijay Kumar

    2008-01-01

    Synthesis and characterization of pine needles reinforced thermosetting resin (Resorcinol-Formaldehyde) which is most suitable as composite matrix has been reported. The polycondensation reaction between resorcinol and formaldehyde (RF) in different molar ratios has been applied to the synthesis of RF polymer matrix. A thermosetting resin based composite, containing approximately 10, 20, 30 and 40% of natural fiber by weight, has been obtained by adding pine needles to the Resorcinol-Formalde...

  2. Synthesis and characterization of a compact tricyclic resorcinol from (+)- and (-)-3-pinanol.

    Science.gov (United States)

    Lu, Dai; Nikas, Spyros P; Han, Xiu-Wen; Parrish, Damon A; Makriyannis, Alexandros

    2012-08-29

    Resorcinol derivatives are important building blocks in the synthesis of natural products and pharmaceutical compounds including cannabinoids. Here we describe the synthesis and the structural characterization of a key resorcinol which carries a fully restricted bridged bicyclic group. We also report a potential mechanism for the acid catalyzed condensation of (+)- or (-)-3-pinanol with 2,6-dimethoxyphenol. The synthesized resorcinol facilitates the development of novel conformationally restricted cannabinoid analogs.

  3. Synthesis and characterization of a compact tricyclic resorcinol from (+)- and (−)-3-pinanol

    OpenAIRE

    Lu, Dai; Nikas, Spyros P.; Han, Xiu-Wen; Parrish, Damon A.; Makriyannis, Alexandros

    2012-01-01

    Resorcinol derivatives are important building blocks in the synthesis of natural products and pharmaceutical compounds including cannabinoids. Here we describe the synthesis and the structural characterization of a key resorcinol which carries a fully restricted bridged bicyclic group. We also report a potential mechanism for the acid catalyzed condensation of (+)- or (−)-3-pinanol with 2,6-dimethoxyphenol. The synthesized resorcinol facilitates the development of novel conformationally restr...

  4. Synthesis and characterization of a linker for primary amines used in the solid phase organic synthesis of spermidine

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Emerson T. da; San Gil, Rosane A.S.; Lima, Edson L.S. [Universidade Federal do Rio de Janeiro (IQ/UFRJ), RJ (Brazil). Inst. de Quimica; Caldarelli, Stefano [Aix-Marseille Univ., Marseille (France). Campus de Saint Jerome; Ziarelli, Fabio [Aix-Marseille Universite Spectropole - Federation de Sciences Chimiques de Marseille, Campus de Saint Jerome (France)

    2011-07-01

    A linker resin for the synthesis of functionalized spermidine in good yield is described, along with its characterization by infrared (IR), {sup 13}C solid-state nuclear magnetic resonance with cross polarization and magic angle spinning ({sup 13}C CPMAS NMR) and {sup 1}H high resolution magic angle spinning nuclear magnetic resonance ({sup 1}H HRMAS NMR). This linker has been regenerated after cleavage of spermidine and re-used without loss of efficiency. (author)

  5. Kaliophilite from fly ash: synthesis, characterization and stability

    Indian Academy of Sciences (India)

    Administrator

    hydrogen production, ammonia synthesis and catalytic combustion of diesel soot (Juntgen 1985). As for the syn- thesis, kaliophilite was mostly synthesized using flint clay or sodalite (Juntgen 1985) as raw materials and syn- thesis from fly ash has not been reported yet. Fly ash is a by-product derived from the combustion of.

  6. synthesis and spectra characterization of mixed- ligand complexes

    African Journals Online (AJOL)

    BARTH EKWUEME

    bipyridine(bpy) has been announced to be “the most used ligand in coordination chemistry” (Humphries, et al., 2005), 2,2':6',2''-terpyridine (tpy) also has a rich chemistry. Almost 70 years ago, Burstall and Morgan reported the first synthesis of 2, 2':6', 2''-terpyridine. (Bermejo, et al., 1999). The kinetics and mechanism of ...

  7. Synthesis and characterization of gelatin based polyester urethane ...

    Indian Academy of Sciences (India)

    Unknown

    After 48 h, the culture plates were analysed under microscope for cell growth pattern as well as their adhesion and spreading. 3. Results and discussion. 3.1 Synthesis of gelatin based polyester urethane scaffold. The main objective of this investigation was to design and synthesize some novel biodegradable polyurethane.

  8. Synthesis, characterization and emission properties of quinolin-8 ...

    Indian Academy of Sciences (India)

    Unknown

    chelated ruthenium organometallics. BIKASH KUMAR PANDA. Department of Inorganic ... Ruthenium organometallics; quinolin-8-olato chelation; emission properties; trivalent ruthenium. 1. Introduction. There is continuing ... chem.istry of orthometallated ruthenium compounds is of current interest in the context of synthesis ...

  9. Metathesis synthesis and characterization of complex metal fluoride ...

    Indian Academy of Sciences (India)

    Administrator

    V MANIVANNAN*, P PARHI and JONATHAN W KRAMER. Department of Mechanical Engineering, Campus Delivery 1374, Colorado State University, Fort Collins,. CO 80523, USA. MS received 30 April 2008. Abstract. Metathesis synthesis of complex metal fluorides using mechanochemical activation has been reported.

  10. The Synthesis and Characterization of Several Corroles | Zipp ...

    African Journals Online (AJOL)

    The synthesis of 10-[2-(benzoylamino)phenyl]-5,15-diphenylcorrole (DPAPCrl) suggests that a large, bulky meso substituent can be incorporated into the corrole with no loss of stability or significant decrease in yield. Both TPCrl and DPAPCrl were crystallized and their crystal structure is reported. KEYWORDS Corrole ...

  11. Synthesis, characterization and antimicrobial studies of bio silica ...

    Indian Academy of Sciences (India)

    37

    disadvantages of flame synthesis [24]. The Laser ablation method has limitations in wavelength of the laser impinging metallic target, duration of laser pulses, laser fluence, duration of ablation and effective liquid medium with or without the presence of surfactants. [25]. Reverse microemulsion method limits its high cost and ...

  12. Noble silver nanoparticles (AgNPs) synthesis and characterization ...

    African Journals Online (AJOL)

    Nanotechnology is rapidly growing with nanoparticles produced and utilized in a wide range of pharmaceutical and commercial products throughout the world. In this study, fig (Ficus carica) leaf extracts were used for ecofriendly extracellular synthesis of stable silver nanoparticles (AgNPs) by treating an aqueous silver ...

  13. Synthesis and characterization of reactive dye-cassava mesocarp ...

    African Journals Online (AJOL)

    USER

    2010-05-17

    May 17, 2010 ... 2Industrial Safety and Environmental Technology Department, Petroleum Training Institute, Effurun, Delta State, Nigeria. Accepted 19 April, 2010. The synthesis of triazine based ..... C- H out of plane bend (polynuclear aromatic) 1726 and 1703. 1750, 1709. 1751. -C = N – stretching. 1625. 1642. 1697.

  14. Synthesis and pharmacological characterization of certain baclofen analogues

    DEFF Research Database (Denmark)

    Attia, M.I.; Herdeis, C.; Bräuner-Osborne, Hans

    2013-01-01

    (RS)-4-Amino-3-(4-chlorophenyl)butanoic acid (baclofen, 2) is the prototypic selective GABAR agonist and is used clinically for the treatment of spasticity associated with brain and spinal cord injuries. Synthesis and GABA receptor agonist activity of certain amino acids structurally related...

  15. The synthesis, characterization and biological evaluation of a stable ...

    African Journals Online (AJOL)

    A convenient one pot synthesis of two novel compounds including a stable phosphorus ylide and an imidazole from electron-poor acetylenes in fairly good yields by the condensation of triphenylphosphine and acetylene derivatives, in the presence of dimethyl thiourea from the 1:1:1 addition reactions is described.

  16. Large scale synthesis and characterization of Ni nanoparticles by ...

    Indian Academy of Sciences (India)

    WINTEC

    energy absorption, fuel cell electrodes, catalysts etc. So the synthesis of Ni nanoparticles has attracted considerable attention. Although many methods are used to prepare Ni particles (Pfeil and Leonard 1987; Degen and Matek. 1999; Zheng et al 2001; Ni et al 2003; Syukri et al 2003;. Hou and Gao 2004; Kumar et al 2004; ...

  17. Synthesis, Characterization and Antibacterial Activity of New 1,2 ...

    African Journals Online (AJOL)

    Synthesis of two series of 1,2- and 1,4-bis(thioureido)benzene derivatives was accomplished by the treatment of corresponding alkanoyl/aroyl chlorides with potassium thiocyanate in dry acetone to afford the respective isothiocyanates as intermediates. The latter were treated in situ with 1,2- and 1,4-diaminobenzene, ...

  18. Synthesis and Characterization of New bis-Symmetrical Adipoyl ...

    African Journals Online (AJOL)

    NJD

    connected via a single bridge between the narrow rims were prepared by reacting the triester monoacid chloride with. 1,2-diaminoethane or ethylene glycol in benzene. X-ray struc- tural studies showed the usual pinched cone conformation of the two calix[4]arene units.5. In this study, we report the synthesis of new calix[4] ...

  19. synthesis and optical characterization of acid-doped polyaniline thin ...

    African Journals Online (AJOL)

    HOD

    biological sensors, actuators, micro electronic devices, etc. It is a good material for applications in photocells, transducers, circuit boards, rechargeable batteries, .... with Silver Nanoparticles”, Advances in Materials. Physics and Chemistry,Vol. 2, pp 75-81, 2012. [5] Fernando, J., and Vedhi, C.,“Synthesis, Spectral and.

  20. Synthesis and characterization of mesoporous Si-MCM-41 materials ...

    Indian Academy of Sciences (India)

    Administrator

    synthesis of plasticizers, perfumes, fragrance in cosme- tics, flavours in food, diluents in paints and coatings and intermediates in drugs, dye stuffs and fine chemicals. (Otera 2003). The conventional catalyst used in esterifi- cation reactions is sulphuric acid, methanesulfonic acid or p-toluenesulfonic acid that are cited as ...

  1. Synthesis and characterization of 4-[(E)-(-2,5 ...

    African Journals Online (AJOL)

    The synthesis of 4-[(E)-(-2,5- dimethoxybenzylidene)amino] benzoic acid. Schiff base, SBDAB was carried out inorder to determine its inhibitory efficiency at higher temperature using weight loss and gasometric techniques. The results showed that the inhibition efficiency of the studied Schiff base increased with increase in ...

  2. Synthesis, characterization and isotherm studies of new composite ...

    Indian Academy of Sciences (India)

    Sorption isotherm studies were conducted in order to investigate the sorption mechanism controlling the sorption process of La3+, Ce3+,. Sm3+ and Nd3+ onto POTZr(IV)WP. 2. Material and method. 2.1 Chemicals and reagents. The main reagents used for the synthesis were zirconium oxychloride (ZrOCl2·8H2O), N-cetyl-N ...

  3. Novel polymers for biomedical and pharmaceutical applications: synthesis and characterization

    OpenAIRE

    Taresco, Vincenzo

    2014-01-01

    The aim of this PhD thesis work has been the synthesis of novel antimicrobial amphiphilic polymers to prevent microbial biofilm related-infections and counteract microbial resistance onset. In fact, microbial biofilms are difficultly eradicable due to their high antibiotic resistance. To reach this purpose different strategies along this work were exploited.

  4. Synthesis and photonic bandgap characterization of polymer inverse opals

    Energy Technology Data Exchange (ETDEWEB)

    Miguez, H.; Meseguer, F.; Lopez, C. [Consejo Superior de Investigaciones Cientificas, Madrid (Spain). Inst. de Ciencia de Materiales; Universidad Politecnica de Valencia (Spain). Centro Tecnologico de Ondas; Lopez-Tejeira, F.; Sanchez-Dehesa, J. [Universidad Autonoma de Madrid (Spain). Dept. de Fisica Teorica de la Materia Condensada

    2001-03-16

    Polymer inverse opals with long-range order have been fabricated and their photonic crystal behavior examined. Good agreement between band structure calculations and experiment is found. It is envisaged that these inverse opals could be used for the modification of the electronic properties of incorporated luminescent materials and as matrices for the synthesis of spherical colloidal particles. (orig.)

  5. Synthesis of an Albendazole Metabolite: Characterization and HPLC Determination

    Science.gov (United States)

    Mahler, Graciela; Davyt, Danilo; Gordon, Sandra; Incerti, Marcelo; Nunez, Ivana; Pezaroglo, Horacio; Scarone, Laura; Serra, Gloria; Silvera, Mauricio; Manta, Eduardo

    2008-01-01

    In this laboratory activity, students are introduced to the synthesis of an albendazole metabolite obtained by a sulfide oxidation reaction. Albendazole as well as its metabolite, albendazole sulfoxide, are used as anthelmintic drugs. The oxidation reagent is H[subscript 2]O[subscript 2] in acetic acid. The reaction is environmental friendly,…

  6. Synthesis and characterization of Eichhornia-mediated copper oxide ...

    Indian Academy of Sciences (India)

    Chemical synthesis methods lead to absorption of several toxic chemicals on the surface that may have unde- sirable effects in the medical applications [19]. To reduce the toxicity, we have focussed our attention on green syn- thesis of nanoparticles. Currently, zinc oxide, gold, silver and copper oxide nanoparticles are ...

  7. synthesis, characterization studies of 2-[(2-hydroxyph carboxamide ...

    African Journals Online (AJOL)

    User

    2016-06-01

    Jun 1, 2016 ... reports synthesis of hydroxyphenyl)methylidene}hydrazine derived from salicyladehyde and semicarbazid its Copper (II) and Zinc (II) complexes. MATERIALS AND METHODS. Materials and Collection of Sample. All reagents used are of analytical grade and used without purification. Melting point/decomp.

  8. Synthesis and characterization of mesoporous Si-MCM-41 materials ...

    Indian Academy of Sciences (India)

    Administrator

    good thermal stability, high surface area as well as retention of surface area at high temperature. ... 4 ion exchange and subsequent thermal decompo- .... ing rate of 2 °C/min. The final material obtained was used for all further studies. 2.2c Synthesis of Al-MCM-41: In the present synthetic endeavour the objective is to ...

  9. Synthesis, characterization and cytotoxic activity of palladium (II ...

    Indian Academy of Sciences (India)

    considerable cytotoxicity while the ligands were non-toxic on the tested cell lines. Keywords. Carbohydrate; pyridyl triazole; palladium complexes; cytotoxicity. 1. Introduction. Bioinorganic chemistry is a rapidly developing field dealing with the synthesis and biological investigation of inorganic complexes.1–5 In inorganic ...

  10. Characterization of cloned cells from an immortalized fetal pulmonary type II cell line

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, R.F.; Waide, J.J.; Lechner, J.F.

    1995-12-01

    A cultured cell line that maintained expression of pulmonary type II cell markers of differentiation would be advantageous to generate a large number of homogenous cells in which to study the biochemical functions of type II cells. Type II epithelial cells are the source of pulmonary surfactant and a cell of origin for pulmonary adenomas. Last year our laboratory reported the induction of expression of two phenotypic markers of pulmonary type II cells (alkaline phosphatase activity and surfactant lipid synthesis) in cultured fetal rat lung epithelial (FRLE) cells, a spontaneously immortalized cell line of fetal rat lung type II cell origin. Subsequently, the induction of the ability to synthesize surfactant lipid became difficult to repeat. We hypothesized that the cell line was heterogenuous and some cells were more like type II cells than others. The purpose of this study was to test this hypothesis and to obtain a cultured cell line with type II cell phenotypic markers by cloning several FRLE cells and characterizing them for phenotypic markers of type II cells (alkaline phosphatase activity and presence of surfactant lipids). Thirty cloned cell lines were analyzed for induced alkaline phosphatase activity (on x-axis) and for percent of phospholipids that were disaturated (i.e., surfactant).

  11. Synthesis, characterization, and antiplasmodial activity of polymer-incorporated aminoquinolines

    CSIR Research Space (South Africa)

    Aderibigbe, BA

    2014-01-01

    Full Text Available In this research, aminoquinoline compounds were synthesized, characterized and incorporated into water soluble polymers to form conjugates. The conjugates were characterized by X ray Diffraction (XRD), Thermal Gravimetric Analysis (TGA), Scanning...

  12. Synthesis of mig-type electron guns for gyrotrons

    International Nuclear Information System (INIS)

    Castro, J.J.B. de; Montes, A.; Silva, C.A.B.

    1984-01-01

    A synthesis method is used in the design of axially symmetrical guns in the moderate to high space charge regime. Self-consistent equations for the temperature limited emission case are used to represent the beam and solve the internal problem, under the requirement of laminar flow. The external problem is solved by integrating the equations with boundary conditions defined by the analytically extended solutions of the internal problem. This technique will be used in the development of INPE's gyrotron. (Author) [pt

  13. [Synthesis and characterization of mixed metal oxide pigments].

    Science.gov (United States)

    Ding, Jie; Yue, Shi-juan; Liu, Cui-ge; Wei, Yong-ju; Meng, Tao; Jiang, Han-jie; Shi, Yong-zheng; Xu, Yi-zhuang; Yu, Jiang; Wu, Jin-guang

    2012-03-01

    In the present work, aluminum chloride and various soluble salts of doping ions were dissolved in water. In addition, urea and polyvinyl pyrrolidone (PVP) were also dissolved in the above aqueous solution under supersonic treatments. Then the solutions were heated to induce the hydrolysis of urea so that soluble aluminum and doping ions convert into insoluble hydroxide or carbonate gels. After calcinations, the obtained gels change to mixed metal oxide pigments whose color is related to type and concentrations of the doping ions. XRD characterization demonstrates that the diffraction patterns of the products are the same as that of alpha-alumina. Diffuse reflectance spectra of samples of the samples in UV-Vis regions show that the absorption bands for d-d transitions of the doping ions undergo considerable change as the coordinate environments change. In addition, L*, a* and b* values of the pigments were measured by using UV-Vis densitometer. SEM results indicate that the size of the pigment powders is in the range 200-300 nm. The pigments are quite stable since no evidence of dissolution was observed after the synthesized pigment is soaked for 24 hours. ICP test shows that very little amount of doped metal occurs in the corresponding filtrate. The above results suggest that these new kinds of mixed metal oxide pigments are stable, non-toxic, environmental friendly and they may be applicable in molten spinning process and provide a new chance for non-aqueous printing and dyeing industry.

  14. Synthesis and characterization of silver nanoparticles in natural rubber

    International Nuclear Information System (INIS)

    Abu Bakar, N.H.H.; Ismail, J.; Abu Bakar, M.

    2007-01-01

    Silver nanoparticles are formed in natural rubber matrix via photo reduction of film cast from natural rubber latex (NRL) containing silver salt. The resulting NR-Ag nanocomposite is characterized using TEM, XRD and UV spectroscopic techniques. The nanoparticles, diameter ranging between 4 and 10 nm, are dispersed within distinct interfaces which correspond to the inter-particle boundaries of the NRL particles that form the matrix. The average width of the interfaces is 8 nm. X-ray diffraction (XRD) analysis confirms the nanoparticles as metallic silver of the face-centered cubic type. UV-vis absorption spectra show peaks characteristic of the surface plasmon resonance of nano-sized silver. A comparison with the results of formation of silver, obtained under similar reduction condition, in a series of matrices namely de-proteinized natural rubber latex (DNRL), NRL containing sodium dodecyl sulfate (SDS), aqueous solutions of bovain serum albumin and SDS, suggests that the protein in natural rubber is responsible for the formation of stable silver nanoparticles in the natural rubber (NR) matrix

  15. Cobalt-doped nanohydroxyapatite: synthesis, characterization, antimicrobial and hemolytic studies

    Energy Technology Data Exchange (ETDEWEB)

    Tank, Kashmira P., E-mail: kashmira_physics@yahoo.co.in [Saurashtra University, Crystal Growth Laboratory, Physics Department (India); Chudasama, Kiran S.; Thaker, Vrinda S. [Saurashtra University, Bioscience Department (India); Joshi, Mihir J., E-mail: mshilp24@rediffmail.com [Saurashtra University, Crystal Growth Laboratory, Physics Department (India)

    2013-05-15

    Hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}; HAP) is a major mineral component of the calcified tissues, and it has various applications in medicine and dentistry. In the present investigation, cobalt-doped hydroxyapatite (Co-HAP) nanoparticles were synthesized by surfactant-mediated approach and characterized by different techniques. The EDAX was carried out to estimate the amount of doping in Co-HAP. The transmission electron microscopy result suggested the transformation of morphology from needle shaped to spherical type on increasing the doping concentration. The powder XRD study indicated the formation of a new phase of brushite for higher concentration of cobalt. The average particle size and strain were calculated using Williamson-Hall analysis. The average particle size was found to be 30-60 nm. The FTIR study confirmed the presence of various functional groups in the samples. The antimicrobial activity was evaluated against four organisms Pseudomonas aeruginosa and Shigella flexneri as Gram negative as well as Micrococcus luteus and Staphylococcus aureus as Gram positive. The hemolytic test result suggested that all samples were non-hemolytic. The photoluminescence study was carried out to identify its possible applicability as a fluorescent probe.

  16. Synthesis and characterization of silica nanoparticles from clay

    Directory of Open Access Journals (Sweden)

    Usama Zulfiqar

    2016-03-01

    Full Text Available We report a method to synthesize silica nanoparticles from bentonite clay. A series of thermal and acid treatment processes was performed on bentonite clay to lower the alumina and increase the silica content. The obtained silica rich clay was treated in two different concentrations (10 wt% and 40 wt% with sodium hydroxide solution to form sodium silicate solutions (SSS. One type of SSS was hydrolyzed with three different concentrations (5 M, 10 M and 15 M of nitric acid in the presence of ethanol as cosolvent while the other SSS was hydrolyzed with nitric acid in the presence of three different quantities (10 ml, 20 ml and 30 ml of ethanol as cosolvent. A range of silica particle sizes from nanometer to micrometer was obtained by varying the contents of silica rich clay, HNO3, and ethanol. It was observed that the concentration of silica rich clay and HNO3 had a direct effect on the particle size. The increase in the quantity of ethanol from 10 ml to 20 ml produced bimodal particles of nanometer and micrometer size, which maintained at 30 ml. Inductively coupled plasma optical emission spectroscopy, atomic absorption spectroscopy, X-ray fluorescence, scanning electron microscopy and X-ray diffraction were utilized to characterize the clay, SSS and nanoparticles.

  17. Synthesis and characterizations of melamine-based epoxy resins.

    Science.gov (United States)

    Ricciotti, Laura; Roviello, Giuseppina; Tarallo, Oreste; Borbone, Fabio; Ferone, Claudio; Colangelo, Francesco; Catauro, Michelina; Cioffi, Raffaele

    2013-09-05

    A new, easy and cost-effective synthetic procedure for the preparation of thermosetting melamine-based epoxy resins is reported. By this innovative synthetic method, different kinds of resins can be obtained just by mixing the reagents in the presence of a catalyst without solvent and with mild curing conditions. Two types of resins were synthesized using melamine and a glycidyl derivative (resins I) or by adding a silane derivative (resin II). The resins were characterized by means of chemical-physical and thermal techniques. Experimental results show that all the prepared resins have a good thermal stability, but differ for their mechanical properties: resin I exhibits remarkable stiffness with a storage modulus value up to 830 MPa at room temperature, while lower storage moduli were found for resin II, indicating that the presence of silane groups could enhance the flexibility of these materials. The resins show a pot life higher than 30 min, which makes these resins good candidates for practical applications. The functionalization with silane terminations can be exploited in the formulation of hybrid organic-inorganic composite materials.

  18. Synthesis and characterization of highly triboluminescent doped europium tetrakis compounds

    International Nuclear Information System (INIS)

    Fontenot, Ross S.; Hollerman, William A.; Bhat, Kamala N.; Aggarwal, Mohan D.

    2012-01-01

    One of the most intriguing properties involving crystals is their ability to emit light when fractured. While this property was discovered over 200 years ago, no one has ever been able to come up with a complete theory that can predict the physical principles associated with triboluminescence. However, this has not stopped scientists from coming up with various uses for these materials. One such application is to use these materials as the active element for smart impact sensors that can warn of catastrophic impacts. If these sensors are to become a reality however, the material must emit a bright light when fractured. One of the brightest triboluminescent materials found thus far is europium dibenzoylmethide triethylammonium (EuD 4 TEA). This material was discovered by Hurt in 1966 and is bright enough to be seen in daylight. In 2011, the authors discovered that synthesizing EuD 4 TEA using europium nitrate instead of chloride significantly increased the triboluminescence yield and made the synthesis much easier and more consistent. However, to date, there are few investigations into the effects of dopants on the triboluminescence of EuD 4 TEA. This paper reports the investigation of the effects of various dopants on: (1) The triboluminescent light yield, (2) Crystal size and structure, (3) Synthesis time, and (4) Prompt decay time. Results show that inclusion of dopants during synthesis increases the triboluminescence emission of EuD 4 TEA by 55%, significantly reduces the synthesis time, and controls the decay time. All of these properties can be useful for constructing the first prototype of a customized impact sensor. - Highlights: ► Doped europium dibenzoylmethide triethylammonium (EuD 4 TEA) was synthesized. ► Effects of dopants was studied from EuD 4 TEA during low velocity (<10 m/s) impacts. ► The triboluminescent light yield, decay time, and synthesis time were measured. ► A specially-built drop tower was developed to measure triboluminescence

  19. Advances in acrylic-alkyd hybrid synthesis and characterization

    Science.gov (United States)

    Dziczkowski, Jamie

    2008-10-01

    performance. Reversible-addition fragmentation polymerization techniques were employed to create a new class of acrylic-alkyd hybrid materials. Medium and long oil alkyds made from the monoglyceride process using soybean oil, glycerol, and phthalic anhydride were modified with a RAFT chain transfer agent. The alkyd macro-RAFT agents were reached by end-capping a medium oil soya-based alkyd with a carboxy-functional trithiocarbonate. The alkyd macro-RAFT agents were then used to create acrylic-alkyd block structures by polymerizing different acrylic monomers, including both acrylates and methacrylates in the presence of the macro-RAFT agent and 2, 2'-azobisisobutyronitrile (AIBN). Co-acrylic segments were reached by complete polymerization of one monomer followed by the addition of a second monomer and additional free radical initiator. The alkyds, macro-RAFT agents and, acrylic-alkyd blocks were characterized by size-exclusion chromatography (SEC), FTIR, and 1H-NMR. Pseudo-first-order kinetics behavior and conversion vs. molecular weight plots show that the RAFT-mediated reaction afforded a more controlled process for the synthesis of acrylated-alkyd materials. Preliminary coatings tests showed that material properties of acrylated-alkyds achieved by RAFT polymerization exhibit good overall coatings properties including adhesion, gloss, hardness, and impact resistance.

  20. Synthesis and characterization of aminated perfluoro polymer electrolytes

    Science.gov (United States)

    Page-Belknap, Zachary Stephan Glenn

    Polymer electrolytes have been developed for use in anion exchange membrane fuel cells for years. However, due to the highly corrosive environment within these fuel cells, poor chemical stability of the polymers and low ion conductivity have led to high development costs and thus prevention from widespread commercialization. The work in this study aims to provide a solution to these problems through the synthesis and characterization of a novel polymer electrolyte. The 800 EW 3M PFSA sulfonyl fluoride precursor was aminated with 3-(dimethylamino)-1-propylamine to yield a functional polymer electrolyte following quaternization, referred to in this work as PFSa-PTMa. 1 M solutions of LiPF6, HCL, KOH, NaOH, CsOH, NaHCO3 and Na2CO3 were used to exchange the polymer to alternate counterion forms. Chemical structure analysis was performed using both FT and ATR infrared spectroscopy to confirm sulfonyl fluoride replacement and the absence of sulfonic acid sites. Mechanical testing of the polymer, following counterion exchange with KOH, at saturated conditions and 60 ºC exhibited a tensile strength of 13 +/- 2.0 MPa, a Young's modulus of 87 +/- 16 MPa and a degree of elongation reaching 75% +/- 9.1%, which indicated no mechanical degradation following exposure to a highly basic environment. Conductivities of the polymer in the Cl- and OH- counterion forms at saturated conditions and 90 ºC were observed at 26 +/- 8.0 mS cm-1 and 1.1 +/- 0.1 mS cm-1, respectively. OH- conductivities were slightly above those observed for CO32- and HCO 3- counterions at the same conditions, 0.63 +/- 0.18 and 0.66 +/- 0.21 mS cm-1 respectively. The ion exchange capacity (IEC) of the polymer in the Cl- counterion form was measured via titration at 0.57 meq g-1 which correlated to 11.2 +/- 0.10 water molecules per ion site when at 60ºC and 95% relative humidity. The IEC of the polymer in the OH- counterion form following titration expressed nearly negligible charge density, less than 0.01 meq

  1. Design, synthesis, and characterization of new materials for thermoelectric applications

    Science.gov (United States)

    Reynolds, Thomas Kent

    Currently, the best known material for thermoelectric refrigeration at room temperature is and alloy of Bi2Te3 and Sb 2Te3. This material has been the basis for room temperature thermoelectric cooling for over 40 years, but its low cooling efficiency (≈10% of Carnot Efficiency) has limited its adaptation to small-market specialty applications. Since Bi2Te3 and its alloys have been studied so extensively, it is doubtful that large improvements in efficiency can be made by further modifications of Bi2Te3 (ie. by changing doping or processing of the material). Therefore, this dissertation deals with the discovery and exploration of completely new systems of compounds. The most important parameter for characterizing the efficiency of a thermoelectric material is the dimensionless quantity ZT, where ZT = S2T/rhokappa. Here, S is the thermopower, T is the temperature, kappa is the thermal conductivity, and rho is the electrical resistivity. These variables are not independent of each other, and usually if one of the values is altered by changing composition or doping, the others change as well. Understanding these parameters in depth leads us to several guidelines for searching for better thermoelectric materials and these are discussed in the dissertation. The concept of obtaining highly symmetric crystal structures and also its relation to increasing the value of ZT is discussed. The synthesis of several new quaternary compounds by starting with highly symmetric tetrahedral anion building blocks is presented. While some of these compounds did in fact have high symmetry structures, none were suitable for further studies because they all had large bandgaps. Further systems we explored include heavy metal telluride compounds and compounds that have multiple ordered anions. These systems were chosen based on the concept of minimizing thermal conductivity. A brief chapter on skutterudite materials explores a few new compounds discovered in this highly researched area. The

  2. Bronchoalveolar lavage fluid from normal rats stimulates DNA synthesis in rat alveolar type II cells

    International Nuclear Information System (INIS)

    Leslie, C.C.; McCormick-Shannon, K.; Mason, R.J.

    1989-01-01

    Proliferation of alveolar type II cells after lung injury is important for the restoration of the alveolar epithelium. Bronchoalveolar lavage fluid (BALF) may represent an important source of growth factors for alveolar type II cells. To test this possibility, BALF fluid was collected from normal rats, concentrated 10-fold by Amicon filtration, and tested for its ability to stimulate DNA synthesis in rat alveolar type II cells in primary culture. BALF induced a dose-dependent increase in type II cell DNA synthesis resulting in a 6-fold increase in [3H]thymidine incorporation. Similar doses also stimulated [3H]thymidine incorporation into rat lung fibroblasts by 6- to 8-fold. Removal of pulmonary surface active material by centrifugation did not significantly reduce the stimulatory activity of BALF for type II cells. The stimulation of type II cell DNA synthesis by BALF was reduced by 100% after heating at 100 degrees C for 10 min, and by approximately 80% after reduction with dithiothreitol, and after trypsin treatment. Dialysis of BALF against 1 N acetic acid resulted in a 27% reduction in stimulatory activity. The effect of BALF in promoting type II cell DNA synthesis was more pronounced when tested in the presence of serum, although serum itself has very little effect on type II cell DNA synthesis. When BALF was tested in combination with other substances that stimulate type II cell DNA synthesis (cholera toxin, insulin, epidermal growth factor, and acidic fibroblast growth factor), additive effects or greater were observed. When BALF was chromatographed over Sephadex G150, the activity eluted with an apparent molecular weight of 100 kDa

  3. An alternative gas sensor material: Synthesis and electrical characterization of SmCoO3

    International Nuclear Information System (INIS)

    Michel, Carlos Rafael; Delgado, Emilio; Santillan, Gloria; Martinez, Alma H.; Chavez-Chavez, Arturo

    2007-01-01

    Single-phase perovskite SmCoO 3 was prepared by a wet-chemical synthesis technique using metal-nitrates and citric acid; after its characterization by thermal analyses and X-ray diffraction, sintering at 900 deg. C in air, gave single phase and well crystallized powders. The powders were mixed with an organic solvent to prepare a slurry, which was deposited on alumina substrates as thick films, using the screen-printing technique. Electrical and gas sensing properties of sintered SmCoO 3 films were investigated in air, O 2 and CO 2 , the results show that sensitivity reached a maximum value at 420 deg. C, for both gases. Dynamic tests revealed a better behavior of SmCoO 3 in CO 2 than O 2 , due to a fast response and a larger electrical resistance change to this gas. X-ray diffraction made on powders after electrical characterization in gases, showed that perovskite-type structure was preserved

  4. Synthesis and characterization of porous silicon as hydroxyapatite host matrix of biomedical applications.

    Directory of Open Access Journals (Sweden)

    A Dussan

    Full Text Available In this work, porous-silicon samples were prepared by electrochemical etching on p-type (B-doped Silicon (Si wafers. Hydrofluoric acid (HF-ethanol (C2H5OH [HF:Et] and Hydrofluoric acid (HF-dimethylformamide (DMF-C3H7NO [HF:DMF] solution concentrations were varied between [1:2]-[1:3] and [1:7]-[1:9], respectively. Effects of synthesis parameters, like current density, solution concentrations, reaction time, on morphological properties were studied by scanning electron microscopy (SEM and atomic force microscopy (AFM measurements. Pore sizes varying from 20 nm to micrometers were obtained for long reaction times and [HF:Et] [1:2] concentrations; while pore sizes in the same order were observed for [HF:DMF] [1:7], but for shorter reaction time. Greater surface uniformity and pore distribution was obtained for a current density of around 8 mA/cm2 using solutions with DMF. A correlation between reflectance measurements and pore size is presented. The porous-silicon samples were used as substrate for hydroxyapatite growth by sol-gel method. X-ray diffraction (XRD and SEM were used to characterize the layers grown. It was found that the layer topography obtained on PS samples was characterized by the evidence of Hydroxyapatite in the inter-pore regions and over the surface.

  5. Synthesis of the Mg Al alloy, their characterization and use for storing hydrogen

    International Nuclear Information System (INIS)

    Sampayo P, A.; Iturbe G, J. L.; Lopez M, B. E.; Sandoval J, A.

    2008-01-01

    This paper presents the synthesis and characterization of the MgAI intermetallic in two Mg25AI and Mg50AI stoichiometric relationships and its possible use for storing hydrogen. The intermetallic was prepared by thermal induction and argon atmosphere. The slug obtained was subjected to heat treatment for homogenization at 300 C during 72 hours. It decreased the particle size with a Spex mill high-energy type built at the National Institute of Nuclear Research, the milling time was 30 to 60 minutes. The material was characterized by scanning electron microscopy and X- ray diffraction tests were carried out hydrogenation in a micro-reactor by varying pressure, temperature and reaction time. The material was analyzed by thermal gravimetric system before and after the hydrogenation process. The results indicate that the intermetallic phase gamma through the milling process does not change with the times used for this purpose were obtained particle sizes smaller than a micron, as demonstrated by the analysis of scanning electron microscopy. X-ray diffraction it was found that there is no phase change in the structure of intermetallic with times of up to one hour of milling. Regarding the amount of hydrogen absorbed in this material with the experimental conditions made especially pressure and temperature, the first results reported 3% hydrogen around, these results were obtained by thermal gravimetric system. (Author)

  6. Discovery and development of the N-terminal procollagen type II (NPII) biomarker: a tool for measuring collagen type II synthesis.

    Science.gov (United States)

    Nemirovskiy, O V; Sunyer, T; Aggarwal, P; Abrams, M; Hellio Le Graverand, M P; Mathews, W R

    2008-12-01

    Progression of joint damage in osteoarthritis (OA) is likely to result from an imbalance between cartilage degradation and synthesis processes. Markers reflecting these two components appear to be promising in predicting the rate of OA progression. Both N- and C-terminal propeptides of type II collagen reflect the rates of collagen type II synthesis. The ability to quantify the procollagen peptides in biological fluids would enable a better understanding of OA disease pathology and provide means for assessing the proof of mechanism of anabolic disease modifying OA drugs (DMOADs). A polyclonal antibody that recognizes the sequence GPKGQKGEPGDIKDI in the propeptide region of rat, dog, and human type II collagen was raised in chicken and peptide-affinity purified. The immunoaffinity liquid chromatography mass spectrometry (LC-MS/MS) was used to extensively characterize N-terminal procollagen type II (NPII) peptides found in biological fluids. The novel competition enzyme-linked immunosorbent assay (ELISA) assay was developed to quantitatively measure the NPII peptides. Several peptides ranging from 17 to 41 amino acids with various modifications including hydroxylations on proline and lysine residues, oxidation of lysines to allysines, and attachments of glucose and galactose moieties to hydroxylysines were identified in a simple system such as ex vivo cultures of human articular cartilage (HAC) explants as well as in more complex biological fluids such as human urine and plasma. A competitive ELISA assay has been developed and applied to urine, plasma, and synovial fluid matrices in human, rat and dog samples. A novel NPII assay has been developed and applied to OA and normal human subjects to understand the changes in collagen type II synthesis related to the pathology of OA.

  7. A General Asymmetric Formal Synthesis of Aza-Baylis-Hillman Type Products under Bifunctional Catalysis.

    Science.gov (United States)

    Frías, María; Carrasco, Ana Cristina; Fraile, Alberto; Alemán, José

    2018-03-02

    A new organocatalytic strategy for the synthesis of enantioenriched aza-Baylis-Hillman type products via a frustrated vinylogous reaction is presented. This process proceeds under mild conditions with good yields, completed Z/E selectivity and excellent enantioselectivities. Moreover, easy derivatizations of the final products led to important building blocks of organic synthesis such as 1,3-aminoalcohols and Lewis base catalysts. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Synthesis, Characterization and Applications in Catalysis of Polyoxometalate/Zeolite Composites

    Directory of Open Access Journals (Sweden)

    Frédéric Lefebvre

    2016-05-01

    Full Text Available An overview of the synthesis, characterization and catalytic applications of polyoxometalates/zeolites composites is given. The solids obtained by direct synthesis of the polyoxometalate in the presence of the zeolite are first described with their applications in catalysis. Those obtained by a direct mixing of the two components are then reviewed. In all cases, special care is taken in the localization of the polyoxometalate, inside the zeolite crystal, in mesopores or at the external surface of the crystals, as deduced from the characterization methods.

  9. Synthesis, optical and morphological characterization of MPA-capped PbSe nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Ouma, Immaculate L.A.; Mushonga, Paul [Departments of Chemistry, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Madiehe, Abram M.; Meyer, Mervin [Departments of Biotechnology, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Dejene, Francis B. [Department of Physics, University of the Free State (QwaQwa campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Onani, Martin O., E-mail: monani@uwc.ac.za [Departments of Chemistry, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa)

    2014-04-15

    This work focuses on the synthesis and characterization of 3-mercaptopropionic acid-capped PbSe nanocrystals (NCs) using an aqueous synthetic protocol. The synthesis was carried out at room temperature and resulted in uniform NCs. The as-synthesized NCs were characterized using photoluminescence spectroscopy, HR-TEM and X-Ray diffraction. They showed a perfect Gaussian peak at 1203 nm with average diameters of ≤3 nm and diffraction patterns consistent with rock-salt structure of PbSe NCs.

  10. Synthesis and Characterization of Two New p-tert-Butylcalix[4]-arene Schiff Bases

    Directory of Open Access Journals (Sweden)

    Saeed Taghvaee Ganjali

    2001-03-01

    Full Text Available Synthesis and characterization of two new Schiff bases of p-tertbuthylcalix[4]arene (H2L1 and HL2 is described. The synthesis of H2L1 and HL2 has been achieved by the condensation of salicylaldehyde with the amine group of upper rim monoamine p-tert-butylcalix[4]arene in ethanol. These compounds have been characterized on the basis of elemental analysis and spectral data. Solvatochromicity and fluorescence properties were observed and measured for H2L1 and HL2. Solvatochromicity of these ligands indicates their potential for NLO applications.

  11. Stimulation of DNA synthesis in cultured rat alveolar type II cells

    International Nuclear Information System (INIS)

    Leslie, C.C.; McCormick-Shannon, K.; Robinson, P.C.; Mason, R.J.

    1985-01-01

    Restoration of the alveolar epithelium after injury is thought to be dependent on the proliferation of alveolar type II cells. To understand the factors that may be involved in promoting type II cell proliferation in vivo, we determined the effect of potential mitogens and culture substrata on DNA synthesis in rat alveolar type II cells in primary culture. Type II cells cultured in basal medium containing 10% fetal bovine serum (FBS) exhibited essentially no DNA synthesis. Factors that stimulated 3 H-thymidine incorporation included cholera toxin, epidermal growth factor, and rat serum. The greatest degree of stimulation was achieved by plating type II cells on an extracellular matrix prepared from bovine corneal endothelial cells and then by culturing the pneumocytes in medium containing rat serum, cholera toxin, insulin, and epidermal growth factor. Under conditions of stimulation of 3 H-thymidine incorporation there was an increased DNA content per culture dish but no increase in cell number. The ability of various culture conditions to promote DNA synthesis in type II cells was verified by autoradiography. Type II cells were identified by the presence of cytoplasmic inclusions, which were visualized by tannic acid staining before autoradiography. These results demonstrate the importance of soluble factors and culture substratum in stimulating DNA synthesis in rat alveolar type II cells in primary culture

  12. Synthesis and characterization of highly conjugated, chiral bridging ligands.

    Science.gov (United States)

    Sauers, Angela L; Ho, Douglas M; Bernhard, Stefan

    2004-12-10

    This paper describes the synthesis of four chiral derivatives of the electronically highly conjugated tetra-2-pyridylpyrazine (TPPZ) bridging ligand, which are denoted (R)- and (S)-4,5- and 5,6-pineno-tetra-2-pyridylpyrazine (PTPPZ). Preparation of these ligands was undertaken through the use of commercially available, enantiomerically pure (1R)- and (1S)-alpha-pinene, which was functionalized and subsequently employed in a Krohnke pyridine synthesis involving a furan-substituted pyridinium salt to yield a chiral, furan-substituted pyridyl intermediate. Oxidative degradation and subsequent reduction of this furan led to a chiral, substituted 2-pyridylaldehyde, which underwent a pyridoin condensation followed by cyclization to produce the final PTPPZ ligands.

  13. Characterization of Nanocarbon Copper Composites Manufactured in Metallurgical Synthesis Process

    Science.gov (United States)

    Knych, Tadeusz; Kwaśniewski, Paweł; Kiesiewicz, Grzegorz; Mamala, Andrzej; Kawecki, Artur; Smyrak, Beata

    2014-08-01

    Currently, there is a worldwide search for new forms of materials with properties that are significantly improved in comparison to materials currently in use. One promising research direction lies in the synthesis of metals containing modern carbon materials ( e.g., graphene, nanotubes). In this article, the research results of metallurgical synthesis of a mixture of copper and two different kinds of carbon (activated carbon and multiwall carbon nanotubes) are shown. Samples of copper-carbon nanocomposite were synthesized by simultaneously exposing molten copper to an electrical current while vigorously stirring and adding carbon while under an inert gas atmosphere. The article contains research results of density, hardness, electrical conductivity, structure (TEM), and carbon decomposition (SIMS method) for the obtained materials.

  14. Synthesis, characterization and in vitro antibacterial activity of novel ...

    Indian Academy of Sciences (India)

    MARZIEH ABBASI

    dried and activated in vacuum at 100. ◦. C. Activated diatomite. (2 g) was dispersed in dry CH2Cl2 and chlorosulfonic acid. (1 mL) was added to the solution at room temperature. After. 2 h, the white solid was filtered, washed repeatedly by dry. CH2Cl2, and dried at 120. ◦. C for 12 h. 2.3 General procedure for the synthesis of.

  15. Synthesis and characterization of mesoporous Si–MCM-41 ...

    Indian Academy of Sciences (India)

    Administrator

    Table S1. MCM-41 synthesis strategies—parameters optimized. BET surface area at different temperature (m2/g). SiO2. Template Template H2O Temp. Aging. Parameters. No. source source mole mole. (°C) time (h) pH. 550 °C. 700 °C. 900 °C. Aging time. 1. Na2SiO3. CTABr. 0⋅25. 80. RT. 1. 10⋅5. 640. 490. 370. 2.

  16. Synthesis and spectral characterization of homo- and hetero ...

    Indian Academy of Sciences (India)

    Unknown

    In this work, we report the synthesis of dinuclear stable, magnetically. *For correspondence ... dropwise to a methanol solution (50 ml) of H4L (0⋅3 g, 0⋅55 mM) in presence of LiOH. (0⋅06 g, 2⋅5 mM), and refluxed ..... Because of the sparing solubility of H4L in common organic solvents, the solution electronic spectrum was ...

  17. Synthesis, characterization and Antioxidant evaluation of Cu (II ...

    African Journals Online (AJOL)

    MBI

    2013-06-25

    Jun 25, 2013 ... ligand and its complexes of Cu (II), Zn (II) and Cd. (II). Materials and Methods. Materials: 1-(2-Aminoethyl)piperazine, salicylaldehyde, CuCl2, ZnCl2, CdCl2 salts and. DMSO-d6 were obtained from Aldrich. All solvent were of analytical grade and used without further purifications. Synthesis: The Schiff base ...

  18. Synthesis and characterization of light-element nanomaterials

    Science.gov (United States)

    Xu, Ting Terry

    One-dimensional (1D) nanostructures are attractive because of their interesting physical, chemical, electrical properties and potential applications in nanoelectronics, nanocomposites and others. Significant research progresses have been made on synthesizing 1 D nanostructures recently. In this dissertation, we report our recent results on synthesis of carbon-related and boron-related nanostructures. We are interested in using carbon-related nanostructure in nanocomposites application, and using boron-related nanostructure in nanoelectronics application. Vapor phase growth synthetic strategy was adopted in this work. A template-based synthesis approach was employed to produce carbon-related nanostructures. Using this approach, nanomaterials having uniform geometries and dimensions can be created via appropriate manipulation of the template fabrication and materials deposition processes. In this work, porous anodic alumina films were used as templates and chemical vapor deposition process was used as materials deposition tool. One of our accomplishments was the synthesis of novel dumbbell-shaped carbon nanotubes. The dumbbell-shaped nanomaterials are promising in nanocomposites application, where enhanced load-transfer through mechanical interlocking with the matrix at the widened ends is anticipated. Motivated by the theoretical prediction of the existence of metallic single-walled boron and metal boride nanotubes, experimental works on synthesis of novel boron-related nanostructures have been carried out. Using a home-built low-pressure chemical vapor deposition system, various boron-related nanostructures have been synthesized. For example, non-catalyst-assisted growth of crystalline boron nanoribbons was achieved by pyrolysis of diborane at relatively low temperature and pressure. Catalyst-assisted growth of calcium boride nanowires was observed by pyrolysis of diborane over calcium oxide powder. Catalyst-assisted growth of boron wire-catalyst-tube hybrid

  19. Controlling Magnetic and Ferroelectric Order Through Geometry: Synthesis, Ab Initio Theory, Characterization of New Multi-Ferric Fluoride Materials

    Energy Technology Data Exchange (ETDEWEB)

    Halasyamani, Shiv [Univ. of Houston, TX (United States); Fennie, Craig [Cornell Univ., Ithaca, NY (United States)

    2016-11-03

    We have focused on the synthesis, characterization, and ab initio theory on multi-functional mixed-metal fluorides. With funding from the DOE, we have successfully synthesized and characterized a variety of mixed metal fluoride materials.

  20. Oegylated and cross-linking carbazole dendrons and dendrimers: Synthesis, characterization, assembly and thin film fabrication

    Science.gov (United States)

    Felipe, Mary Jane Legaspi

    2011-12-01

    Dendrimers and dendrons (fractional dendrimers) are macromolecular structures that have well-defined molecular weights and precise number of functional groups. Tailoring these structures has provided designer molecules that can be used for various applications including drug delivery, sensors, and anti-biofouling surfaces. Overall, this dissertation provides novel protocols for the understanding of molecular design, synthesis, and structure-property relationship of OEGylated and conjugated carbazole dendrons and dendrimers. In this design, the use of oligo(ethylene glycol) (OEG) allows for the fabrication of biocompatible materials and imparts hydrophilicity on the structure while the carbazole functionality allows the cross-linking of these designer molecules. Such fine-tuning of macromolecular structures leading to the fabrication of anti-biofouling thin films, nanostructuring at the air-water interface, and assembly into supramolecular superstructures are considered in this dissertation. Chapter 2 details the synthesis, characterization, and electrochemical cross-linking of OEGylated linear dendrons and "Janus-type" dendrimers. Cross-linking the carbazole moieties enables the deposition of these films on Au, indium tin oxide-coated glass, and doped silicon through cyclic voltammetry and provides films with secondary level of organization imparted by the inter- and intra-molecular interaction among the carbazole units. Chapter 3 describes the fabrication of nonspecific protein adsorption resistant surfaces through electrochemical grafting of three different dendrons on SAM carbazole-coated gold substrates. The predictable shape of each dendron and the ability to cross-link the carbazole units have enabled parametrization of OEG conformation and density on these interfaces. Chapter 4 demonstrates the fundamental architectural requirements for obtaining stable films with OEGylated linear dendron molecules providing a new architectural design of nanostructuring

  1. Synthesis and Characterization of Nanocrystalline Aluminophosphate AlPO4-5 Molecular Sieve

    Directory of Open Access Journals (Sweden)

    Asir Alnaama

    2018-03-01

    Full Text Available Nanocrystalline aluminophosphate AlPO4-5 molecular sieves were synthesized by hydrothermal method (HTS. Synthesis parameters like time and temperature of crystallization were investigated. Type of template (R and ratio of R/P2O5 were studied also. Characterization of the synthesized AlPO4-5 were done by powder X-ray diffraction (XRD, scanning electron microscopy (SEM/EDX, Fourier transform infrared (FTIR, differential scanning calorimetry-thermogravimetry analysis (DSC-TGA, and N2 adsorption-desorption BET analysis. XRD patterns results showed excellent crystallinity for two types of templates, di-n-propylamine (DPA and tetrapropyl ammonium hydroxide (TPAOH for alumminophosphate five (AFI structure. Nano-level for particle size of 66 nm was revealed by AFM test. Good thermal stability was obtained in DSC-TGA results. Best time and temperature of crystallization of 24h and 190 O C were got. Optimum R/P2O5 for two kind of template was established.

  2. Fabrication and characterization of w-type hexa-ferrites

    International Nuclear Information System (INIS)

    Rana, U. M.; Islam, M. U.; Qadri, U.; Niazi, S. B.

    2006-01-01

    W-type Hexagonal ferrites BaCu/sub 2-x/Zn/sub x/ Fe/sub 16/O/sub 27/ (X=0.0, 0.5, 1.0, 1.5, 2.0) were prepared by co-precipitation technique. The samples were characterized on the basis of electrical properties. By measuring electrical resistivity and thermopower the conduction in these materials is attributed to the hopping mechanism of electrons between Fe/sup +2/ and Fe/sup +3/ along with holes transfer between Zn/sup 2+/ and Zn/sup +3/. The thermoelectric power results show that all these samples are degenerate type semiconductors. (author)

  3. Synthesis and Test of 'New' Gel-Type Lithium Electrolytes

    National Research Council Canada - National Science Library

    Scrosati, Bruno

    1994-01-01

    In this 6th two-month period we have continued the characterization of PMMA-based electrolyte membranes by examining the phenomena occurring at the interface between these membranes and the lithium...

  4. Synthesis and characterization of nano silicon and titanium nitride ...

    Indian Academy of Sciences (India)

    ... nano titanium nitride was synthesized by using liquid titanium tetrachloride as the precursor. The synthesized nano silicon and titanium nitride powders were characterized by XRD, XPS, TEM, SEM and BET. The characterization techniques indicated that the synthesized powders were indeed crystalline nanomaterials.

  5. Synthesis and electrochemical characterization of stabilized nickel nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Dominguez-Crespo, M.A.; Ramirez-Meneses, E.; Torres Huerta, A.M. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, CICATA-IPN Unidad Altamira, Carretera Tampico-Puerto Industrial, C.P. 89600 Altamira, Tamaulipas (Mexico); Montiel-Palma, V. [Centro de Investigaciones Quimicas, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, Colonia Chamilpa, C.P.62201 Cuernavaca, Morelos (Mexico); Dorantes Rosales, H. [Departamento de Metalurgia, Escuela Superior de Ingenieria Quimica e Industrias Extractivas - IPN, C.P. 07300, D.F. (Mexico)

    2009-02-15

    Nickel stabilized nanoparticles produced by an organometallic approach (Chaudret's method) starting from the complex Ni(1,5-COD){sub 2} were used as electrode materials for hydrogen evolution in NaOH at two temperatures (298 and 323 K). The synthesis of the nickel nanoparticles was performed in the presence of two different stabilizers, 1,3-diaminopropane (DAP) and anthranilic acid (AA), by varying the molar ratios (1:1, 1:2 and 1:5 metal:ligand) in order to evaluate their influence on the shape, dispersion, size and electrocatalytic activity of the metallic particles. The presence of an appropriate amount of stabilizer is an effective alternative to the synthesis of small monodispersed metal nanoparticles with diameters around 5 and 8 nm for DAP and AA, respectively. The results are discussed in terms of morphology and the surface state of the nanoparticles. The importance of developing a well-controlled synthetic method which results in higher performances of the resulting nanoparticles is highlighted. Herein we found that the performance with respect to the HER of the Ni electrodes dispersed on a carbon black Vulcan substrate is active and comparable to that reported in the literature for the state-of-the-art electrocatalysts. Appreciable cathodic current densities of {proportional_to}240 mA cm{sup -2} were measured with highly dispersed nickel particles (Ni-5{sub DAP}). This work demonstrates that the aforementioned method can be extended to the preparation of highly active stabilized metal particles without inhibiting the electron transfer for the HER reaction, and it could also be applied to the synthesis of bimetallic nanoparticles. (author)

  6. Green synthesis and characterization of silver nanoparticle using Aloe barbadensis

    Energy Technology Data Exchange (ETDEWEB)

    Thappily, Praveen, E-mail: pravvmon@gmail.com, E-mail: shiiuvenus@gmail.com; Shiju, K., E-mail: pravvmon@gmail.com, E-mail: shiiuvenus@gmail.com [Laboratory for Molecular Photonics and Electronics (LAMP), Department of Physics, National Institute of Technology, Calicut, Kerala 673601 (India)

    2014-10-15

    Green synthesis of silver nanoparticles was achieved by simple visible light irradiation using aloe barbadensis leaf extract as reducing agent. UV-Vis spectroscopic analysis was used for confirmation of the successful formation of nanoparticles. Investigated the effect of light irradiation time on the light absorption of the nanoparticles. It is observed that upto 25 minutes of light irradiation, the absorption is linearly increasing with time and after that it becomes saturated. Finally, theoretically fitted the time-absorption graph and modeled a relation between them with the help of simulation software.

  7. Synthesis and characterization of zwitterionic carbon dioxide fixing reagents

    DEFF Research Database (Denmark)

    Mikkelsen, Mette; Jørgensen, Mikkel; Krebs, Frederik C

    2010-01-01

    The synthesis of three amine-based carbon dioxide fixing reagents is presented. The reagents were designed so that they would be able to bind CO2 reversibly through the formation of the well known carbamates that was stabilized through forming a zwitterion. CO2 fixing experiments were performed...... with 13CO2 labeling and medium pressure NMR. The experiments showed that two of the three reagents were able to form carbamates and thus bind CO2. In addition we investigated this particular class of molecules for the possible formation of neutrally charged spiro compounds and we show that these did...

  8. Synthesis, characterization, antimicrobial and anticancer studies of new steroidal pyrazolines

    Directory of Open Access Journals (Sweden)

    Shamsuzzaman

    2016-01-01

    Full Text Available A convenient synthesis of 2′-(2″,4″-dinitrophenyl-5α-cholestano [5,7-c d] pyrazolines 4–6 from cholest-5-en-7-one 1–3 was performed and structural assignment of the products was confirmed on the basis of IR, 1H NMR, 13C NMR, MS and analytical data. The synthesized compounds were screened for in vitro antimicrobial activity against different strains during which compound 6 showed potent antimicrobial behaviour against Corynebacterium xerosis and Staphylococcus epidermidis. The synthesized compounds were also screened for in vitro anticancer activity against human cancer cell lines during which compound 5 exhibited significant anticancer activity.

  9. Green synthesis and characterization of silver nanoparticle using Aloe barbadensis

    Science.gov (United States)

    Thappily, Praveen; Shiju, K.

    2014-10-01

    Green synthesis of silver nanoparticles was achieved by simple visible light irradiation using aloe barbadensis leaf extract as reducing agent. UV-Vis spectroscopic analysis was used for confirmation of the successful formation of nanoparticles. Investigated the effect of light irradiation time on the light absorption of the nanoparticles. It is observed that upto 25 minutes of light irradiation, the absorption is linearly increasing with time and after that it becomes saturated. Finally, theoretically fitted the time-absorption graph and modeled a relation between them with the help of simulation software.

  10. Synthesis and Characterization of 5-(hydrazino-alkyl) Tetrazoles

    Science.gov (United States)

    2014-07-01

    structure and 1H NMR spectrum of hydrazone 7 7 Synthesis of 5 - (hydrazino - alkyl) tetrazole via BOC hydrazine Amino acid- BOC Amino acid . HCl...Acidic medium Tetrazole-R-N2H2- BOC Acidic medium Tetrazole-R-N2H2 . HCl  Address solubility issues  Solid state structures of hydrochloride salt...hydrazino - alkyl) tetrazole via BOC hydrazine Removal of BOC protecting group 11, n = 1 12, n = 2 1H NMR and DSC of 5-(hydrazino-methyl)tetrazole

  11. Synthesis and characterization of covalent diphenylalanine nanotube-folic acid conjugates

    DEFF Research Database (Denmark)

    León, John Jairo Castillo; Rindzevicius, Tomas; Wu, Kaiyu

    2014-01-01

    Herein, we describe the synthesis and characterization of a covalent nanoscale assembly formed between diphenylalanine micro/nanotubes (PNT) and folic acid (FA). The conjugate was obtained via chemical functionalization through coupling of amine groups of PNTs and carboxylic groups of FA. The sur......Herein, we describe the synthesis and characterization of a covalent nanoscale assembly formed between diphenylalanine micro/nanotubes (PNT) and folic acid (FA). The conjugate was obtained via chemical functionalization through coupling of amine groups of PNTs and carboxylic groups of FA...... performed on a large area silver-capped (diameter of 62 nm) silicon nanopillars with an approximate height of 400 nm and a width of 200 nm. The results showed that the PNT-FA synthesis procedure preserves the molecular structure of FA. The PNT-FA conjugate presented in this study is a promising candidate...

  12. Green approach for the synthesis and characterization of ZrSnO4 nanopowder

    Science.gov (United States)

    Athar, Taimur; Vishwakarma, Sandeep Kumar; Bardia, Avinash; Alabass, Razzaq; Alqarlosy, Ahmed; Khan, Aleem Ahmed

    2016-06-01

    Well-defined structural framework of ZrSnO4 nanopowder has been synthesized for the fabrications of cost-effective and sensitive devices which give final reproducible result with reliability under ideal conditions. The synthesis was carried out at moderate temperature and then finally dried in the laboratory oven and then followed with calcination at 1000 °C for 4 h to get phase selective product. It was observed that gelation time depends on the concentration of reactants and temperature. The characterization of ZrSnO4 was carried out with XRD, SEM, TEM, UV, thermal analysis, DLS and FT-IR techniques. With adjustment of reaction parameters, the systematic tuning of the particle size, shape and functional properties can be controlled. It was concluded that self-assembly is an integral part for the synthesis and opens a new exciting opportunity for better understanding the formation of nanostructure framework from micro- to nanoscale along with mechanistic via wet chemical approach. ZrSnO4 has vital role in identifying its potential cytotoxicity in the biological systems. The cytotoxicity effects of ZrSnO4 nanopowder in vitro were evaluated in three different human cell types (hepatocytes, mesenchymal stem cells and neuronal cells). Acute exposure of nanoparticles was found to have greater cytotoxic effect at higher concentration (30 µg/ml). However, partial detoxification was observed during nanoparticles exposure at day 6. The study concluded that an initial stress from nanoparticles incorporates sealing or detoxification of nanoparticles which may help to recover cell viability.

  13. Microwave radiation hydrothermal synthesis and characterization of micro- and mesoporous composite molecular sieve Y/SBA-15

    Directory of Open Access Journals (Sweden)

    Wenyuan Wu

    2017-05-01

    Full Text Available A microwave radiation hydrothermal method to control synthesis of micro- and mesoporous Y/SBA-15 composite molecular sieves was reported. The synthesized SBA-15 and Y/SBA-15 were characterized by scanning electron microscopy (SEM and N2 adsorption–desorption. The three kinds of different concentrations of hydrochloric acid (0.75 M, 2 M and 3.25 M were used to investigate the effect on Y/SBA-15. The analysis results of the composite products indicated that the optimization synthesis condition employed zeolite type Y and TEOS as silicon sources under 0.75 M hydrochloric acid by the microwave radiation hydrothermal synthesis method. The N2 adsorption–desorption test results of micro–mesoporous composite molecular sieve type Y/SBA-15 in mesoporous extent indicated that SBET is 355.529 m2/g, D‾BET is 4.050 nm, and mesoporous aperture focuses on the distribution region of 5.3 nm. It was found that the received composite product has an appropriate proportion of smaller size, larger size pore structure and the thicker pore wall. In addition, its internal channels have a high degree of order and smooth flow in long-range channels.

  14. Nano-/micro metallic wire synthesis on Si substrate and their characterization

    International Nuclear Information System (INIS)

    Kaur, Jaskiran; Kaur, Harmanmeet; Singh, Surinder; Kanjilal, Dinakar; Chakarvarti, Shiv Kumar

    2014-01-01

    Nano-/micro wires of copper are grown on semiconducting Si substrate using the template method. It involves the irradiation of 8 um thick polymeric layer coated on Si with150 MeV Ni ion beam at a fluence of 2E8. Later, by using the simple technique of electrodeposition, copper nano-/micro wires were grown via template synthesis. Synthesized wires were morphologically characterized using SEM and electrical characterization was carried out by finding I-V plot

  15. Synthesis and characterization of implants for bone substitutions made of biomedical apatites containing silicon

    OpenAIRE

    Sprio, Simone

    2008-01-01

    In the last decades the development of bone substitutes characterized by a superior biomimetism has become of particular interest, owing to the increasing economic and societal impact of the bone diseases. In the present work of research the development of bone substitutes characterized by improved biomimetism, has been faced in a chemical, structural and morphological perspective. From a chemical point of view, it has been developed the synthesis of hydroxyapatite powders, exhibiting m...

  16. Synthesis and characterization of homogeneous interstitial solutions of nitrogen and carbon in iron-based lattices

    DEFF Research Database (Denmark)

    Brink, Bastian Klüge

    work in synthesis and characterization of interstitial solutions ofnitrogen and carbon in iron-based lattices. In order to avoid the influences of gradients incomposition and residual stresses, which are typically found in treated surface layers,homogenous samples are needed. These were prepared from...... pure iron or austeniticstainless steel using gaseous mixtures of ammonia, hydrogen, acetylene and propene atelevated temperatures.Structural and magnetic properties have been characterized with neutron diffraction,vibrating sample magnetometry and Mössbauer spectroscopy. Thermal expansion...

  17. MCM-41 ordered mesoporous molecular sieves synthesis and characterization

    Directory of Open Access Journals (Sweden)

    Rogério A.A. Melo

    1999-07-01

    Full Text Available The aim of this work was to study the hydrothermal synthesis of Si and SiAlMCM-41 performed under both autogenic pressure and refluxing conditions. XRD data showed that the MCM-41 phase may be formed by both processes and that the synthesized material in the presence of Al and/or under reflux presents the hexagonally arrangement of less ordered mesopores. However, as verified by XRD and physisorption data, the order was improved with higher synthesis times. 29Si and 1H - 29Si C/P MAS NMR spectra showed that a great part of the Si atoms exists as silanol groups which originate resonance peaks at -110, -100 and -91 ppm. The presence of Al atoms may generate Si(3Si, Al and Si(2Si, 2Al environments which might be contributing to resonance peaks at -100 and -91 ppm. The 27Al MAS NMR spectrum of the as synthesized AlSiMCM-41 showed a resonance peak of tetrahedral framework aluminum close to 53 ppm and two others, one close to 14 ppm attributed to Al(H2O6+3 species and the other a weak signal close to 32 ppm attributed to pentacoordinated Al. 27Al MAS NMR spectra of the calcined sample showed a peak at 0 ppm corresponding to an hexacoordinated extra-framework aluminum formed during calcination.

  18. Synthesis and Characterization of Soluble Alkylalcohol-derivatized Graphene Oxide

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Seunghyun; Sohn, Honglae [Chosun Univ., Gwangju (Korea, Republic of); Ko, Young Chun [Sehan Univ., Chonnnam (Korea, Republic of)

    2013-04-15

    So, many effective synthetic methodologies have been developed for graphene oxide. Since the successful synthetic methods of graphene oxide were invented by Brodie in 1859 and by Hummers and Offeman in 1958, during eight years of the modern period studies graphene oxide synthesis have been achieved considerably by modifying Brodie's, and Hummers and Offeman's methods. Most exfoliation of graphite oxide has been possible either by sudden thermal expansion or ultrasonic dispersion of graphite to obtain graphene. Graphene oxide is a water-insoluble nanomaterial containing carboxylic, epoxy, and hydoxyl groups. That is, graphene oxide is an oxidized nanomaterial with acidic functional group and the oxidants intercalated in the inter-thin layer space. This guides to a route for exfoliation of graphite by rapid de-intercalation. The graphene oxide is considered as a special and new material possessing a high area to volume ratio and violent charge transport properties. These novel properties can be made graphene oxide greatly promising for the diverse applications including high functional batteries, sensors, solar energy system, and highly sophisticated micro-electrical devices such as field-effect transistors and electromechanical resonators. Here, therefore, we report a synthesis on derivatization of graphene oxide with alkylalcohol to give soluble graphenes. Because the soluble alkoxy-derivatized graphene oxides may be presented a particular electronic transport properties. In this paper we study to yield a basic optical properties data of the soluble graphene oxides.

  19. Synthesis, characterization and sensing application of novel semiconductor oxides.

    Science.gov (United States)

    Li, G J; Kawi, S

    1998-02-01

    Mesoporous SnO(2) with high surface areas were synthesized using a cationic surfactant (N-cetyl-N,N,N-trimethylammonium bromide) as a synthetic template. Acidity of the starting synthesis slurry was used as one of the controlling parameters for the synthesis. After the SnO(2) was synthesized at pH 7.15, it was calcined at 723 K for 10 h in air. It had a BET surface area of 156.8 m(2) g(-1) with a pore diameter of 38.4 A. Infrared spectroscopy (FTIR) and thermal analysis techniques (thermogravimetry and differential thermal analysis) showed that the surfactant was incorporated in the mesopores of SnO(2) and calcination in air at 673-723 K was needed to remove the surfactant completely from the mesopores. The effects of SnO(2) surface area on its gas sensing properties were also investigated. It was observed that SnO(2) with higher surface areas had much higher sensitivities to hydrogen at 573 K.

  20. Synthesis and characterization of hydroxyapatite from fish bone waste

    Energy Technology Data Exchange (ETDEWEB)

    Marliana, Ana, E-mail: na-cwith22@yahoo.co.id; Fitriani, Eka; Ramadhan, Fauzan; Suhandono, Steven; Yuliani, Keti; Windarti, Tri [Chemistry Department, Faculty of Science and Mathematics, Diponegoro University, Indonesia, 50 275 (Indonesia)

    2015-12-29

    Waste fish bones is a problem stemming from activities in the field of fisheries and it has not been used optimally. Fish bones contain calcium as natural source that used to synthesize hydroxyapatite (HA). In this research, HA synthesized from waste fish bones as local wisdom in Semarang. The goal are to produce HA with cheaper production costs and to reduce the environmental problems caused by waste bones. The novelty of this study was using of local fish bone as a source of calcium and simple method of synthesis. Synthesis process of HA can be done through a maceration process with firing temperatures of 1000°C or followed by a sol-gel method with firing at 550°C. The results are analyzed using FTIR (Fourier Transform Infrared), XRD (X-Ray Diffraction) and SEM-EDX (Scanning Electron Microscopy-Energy Dispersive X-Ray). FTIR spectra showed absorption of phosphate and OH group belonging to HA as evidenced by the results of XRD. The average grain size by maceration and synthesized results are not significant different, which is about 69 nm. The ratio of Ca/P of HA by maceration result is 0.89, then increase after continued in the sol-gel process to 1.41. Morphology of HA by maceration results are regular and uniform particle growth, while the morphology of HA after the sol-gel process are irregular and agglomerated.

  1. Synthesis and Characterization of Multimetallic Fe(II) and Mn(II ...

    African Journals Online (AJOL)

    MBI

    Synthesis and Characterization of Multimetallic Fe(II) and Mn(II) Using. N4O3 Potentially Heptadentate Ligand. Mustapha, A. and Gani, S. M.. Department of Chemistry, Federal University Dutse, PMB 7156, Jigawa State. Email: abmustapha2004@yahoo.com. ABSTRACT. Potentially heptadentate (N4O3) tripodal Schiff-base ...

  2. Synthesis, characterization and behaviour to gamma radiation of the bis-L-alaninato-copper (II)

    International Nuclear Information System (INIS)

    Passos, B.F.T.

    1985-01-01

    The behaviour of coordinated compound obtained from the copper (II) and the L-(+)- alanine to gamma radiation was determined. A study of synthesis and characterization of this complex was made with elementary analysis, ultraviolet and visible electronic spectroscopy, infrared vibrational spectroscopy, proton magnetic resonance spectroscopy and thermo-gravimetric analysis. (C.G.C.)

  3. Synthesis, Characterization, and Saccharide Binding Studies of Bile Acid − Porphyrin Conjugates

    Directory of Open Access Journals (Sweden)

    Vladimír Král

    2007-01-01

    Full Text Available Synthesis and characterization of bile acid-porphyrin conjugates (BAPs are reported. Binding of saccharides with BAPs in aqueous methanol was studied by monitoring changes in the visible absorption spectral of the porphyrin-moieties. Although these studies clearly showed absorbance changes, suggesting quite high if non-selective binding, the mass spectral studies do not unambiguously support these results.

  4. Synthesis and characterization of a new efficient blue-light- emitting copolymer

    NARCIS (Netherlands)

    Hilberer, A; Brouwer, H.J; van der Scheer, B.J.; Wildeman, J.; Hadziioannou, G

    1995-01-01

    In this paper we present the synthesis, the characterization, and the use in light-emitting diodes of a new blue-light-emitting copolymer, poly[2,5,2'',5''-tetraoctyl-p-terphenyl-4,4''-ylenevinylene-p-phenylenevinylene]. This copolymer, obtained by a poly-Heck reaction, has a fully unsaturated

  5. Synthesis and characterization of γ-Bi2O3 based solid electrolyte ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 4. Synthesis and characterization of -Bi2O3 based solid electrolyte doped with Nb2O5. Handan Ozlu Soner Cakar Caner Bilir Ersay Ersoy Orhan Turkoglu. Volume 37 Issue 4 June 2014 pp 843-848 ...

  6. Facile synthesis and characterization of rough surface V2O5 ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 40; Issue 6. Facile synthesis and characterization of rough surface V 2 O 5 nanomaterials for pseudo-supercapacitor electrode material with high capacitance. YIFU ZHANG YUTING HUANG. Volume 40 Issue 6 October 2017 pp 1137-1149 ...

  7. Synthesis and characterization of silica–gold core-shell (SiO2@Au ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of silica–gold core-shell (SiO2@Au) nanoparticles. DEEPIKA KANDPAL. 1,∗. , SUCHITA KALELE. 2 and S K KULKARNI. 2. 1. Department of Physics, G.B. Pant University of Agriculture & Technology,. Pantnagar 263 145, India. 2. Department of Physics, University of Pune, Pune 411 007, ...

  8. Design, synthesis and characterization of 1 H-pyridin-4-yl-3, 5 ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 3. Design, synthesis and characterization of 1 H-pyridin-4-yl-3, 5-disubstituted indazoles and their anti-inflammatory and analgesic activity. Arava Veera Reddy Surendrareddy Gogireddy P K Dubey Madhava Reddy B Veeresh B. Regular Articles Volume ...

  9. Synthesis and characterization of MoO3–WO3 composite thin films ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 36; Issue 1. Synthesis and characterization of MoO3–WO3 composite thin films by liquid phase deposition technique: Investigation of its photochromic properties. H M Farveez Ahmed Noor Shahina Begum. Volume 36 Issue 1 February 2013 pp 45-49 ...

  10. 133–137 Synthesis and Characterization of 5-Substituted 1H ...

    African Journals Online (AJOL)

    Kametani Koichi

    Synthesis and Characterization of 5-Substituted 1H-tetrazoles in the Presence of Nano-TiCl4.SiO2. L. Zamania,*, B. F. Mirjalilia, K. Zomorodianb and S. Zomorodianb a. Department of Chemistry, College of Science, Yazd University, Yazd, P.O.Box 8915813149, Iran. b. Center of Basic Researches in Infectious Diseases and ...

  11. Synthesis and characterization of aqueous MPA-capped CdS–ZnS ...

    Indian Academy of Sciences (India)

    713–721. Synthesis and characterization of aqueous MPA-capped. CdS–ZnS core–shell quantum dots. ATEFEH EMAMDOUST1, SABER FARJAMI SHAYESTEH1,∗ and. MAZIYAR MARANDI2. 1Nanostructure Lab, Department of Physics, University of Guilan, Guilan, Iran. 2Department of Physics, Arak University, Arak, Iran.

  12. Synthesis and characterization of sol–gel derived ZnS: Mn 2 ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of undoped and Mn2+ doped ZnS nanocrystallites (radius 2–3 nm) embedded in a partially densified silica gel matrix are presented. Optical transmittance, photoluminescence (PL), ellipsometric and electron spin resonance measurements revealed manifestation of quantum size effect.

  13. Synthesis, characterization and gas sensing performance of SnO2 ...

    Indian Academy of Sciences (India)

    Synthesis, characterization and gas sensing performance of SnO2 thin films prepared by spray pyrolysis. GANESH E PATIL, D D KAJALE, D N CHAVAN†, N K PAWAR††, P T AHIRE, S D SHINDE#,. V B GAIKWAD# and G H JAIN. ∗. Materials Research Laboratory, Arts, Commerce and Science College, Nandgaon 423 106, ...

  14. Synthesis and characterization of LiMg y Mn 2–y O 4 cathode ...

    Indian Academy of Sciences (India)

    Synthesis and characterization of LiMgyMn2–yO4 cathode materials by a modified Pechini process for lithium batteries. A Subramania N Angayarkanni ... 1 : 1 (v/v) mixture of EC and DEC. The charge–discharge studies were performed and the results were compared with materials prepared by a solid state thermal method.

  15. Synthesis, characterization and drug-delivery activity of rifampin ...

    Indian Academy of Sciences (India)

    Rif.) and further characterized by. WAFS, differential scanning calorimetry (DSC), ultraviolet– visible (UV–visible) techniques, and swelling properties [9]. PVA was also structurally modified with isopropylacryl amide [10], hydroxyl acids [11], ...

  16. Synthesis and characterization of nanoboron powders prepared with ...

    Indian Academy of Sciences (India)

    % hydrochloric acid (only one) to remove impurities. Boron powders were obtained after centrifuging, decanting, washing and drying operations. Sample was characterized by inductively coupled plasma (ICP), energy-dispersive spectroscopy, ...

  17. Synthesis, characterization and application of an inorgano organic ...

    Indian Academy of Sciences (India)

    , followed by its derivatization using para-chlorophenol (CP). The resulting compound is abbreviated as ZWCP. ZWCP has been characterized for elemental analysis, spectral analysis (FTIR), X-ray analysis and thermal analysis (TGA).

  18. Synthesis and characterization of PbTe micro/nanostructures ...

    Indian Academy of Sciences (India)

    Administrator

    dioxaoctane and. 2-hydroxybenzophenone marked as (2-HBP)-(DaDo) was synthesized, characterized and then used as capping agent for the preparation of PbTe micro/nanostructures. Besides the as-synthesized Schiff base compound,.

  19. Synthesis, characterization and antimicrobial studies of Cu(II) and ...

    African Journals Online (AJOL)

    chloroaniline were synthesized and characterized by solubility test, infrared spectra, conductivity measurement, magnetic susceptibility, metal-ligand ratio determination, and antimicrobial activity. The low molar conductance values range (16.

  20. Synthesis, characterization, x-ray structure and antimicrobial activity ...

    African Journals Online (AJOL)

    Purpose: To synthesize thiosemicarbazide and determine its antimicrobial properties. Methods: Pyridine-based thiosemicarbazide was synthesized, characterized and evaluated for antimicrobial activity. The structure of the synthesized compound was established by spectral analysis, namely, Fourier transform infrared ...