WorldWideScience

Sample records for two-stage selenization methods

  1. Recursive algorithm for the two-stage EFOP estimation method

    Institute of Scientific and Technical Information of China (English)

    LUO GuiMing; HUANG Jian

    2008-01-01

    A recursive algorithm for the two-stage empirical frequency-domain optimal param-eter (EFOP) estimation method Was proposed. The EFOP method was a novel sys-tem identificallon method for Black-box models that combines time-domain esti-mation and frequency-domain estimation. It has improved anti-disturbance perfor-mance, and could precisely identify models with fewer sample numbers. The two-stage EFOP method based on the boot-strap technique was generally suitable for Black-box models, but it was an iterative method and takes too much computation work so that it did not work well online. A recursive algorithm was proposed for dis-turbed stochastic systems. Some simulation examples are included to demonstrate the validity of the new method.

  2. A Two-stage Polynomial Method for Spectrum Emissivity Modeling

    OpenAIRE

    Qiu, Qirong; Liu, Shi; Teng, Jing; Yan, Yong

    2015-01-01

    Spectral emissivity is a key in the temperature measurement by radiation methods, but not easy to determine in a combustion environment, due to the interrelated influence of temperature and wave length of the radiation. In multi-wavelength radiation thermometry, knowing the spectral emissivity of the material is a prerequisite. However in many circumstances such a property is a complex function of temperature and wavelength and reliable models are yet to be sought. In this study, a two stages...

  3. A two-stage method for inverse medium scattering

    KAUST Repository

    Ito, Kazufumi

    2013-03-01

    We present a novel numerical method to the time-harmonic inverse medium scattering problem of recovering the refractive index from noisy near-field scattered data. The approach consists of two stages, one pruning step of detecting the scatterer support, and one resolution enhancing step with nonsmooth mixed regularization. The first step is strictly direct and of sampling type, and it faithfully detects the scatterer support. The second step is an innovative application of nonsmooth mixed regularization, and it accurately resolves the scatterer size as well as intensities. The nonsmooth model can be efficiently solved by a semi-smooth Newton-type method. Numerical results for two- and three-dimensional examples indicate that the new approach is accurate, computationally efficient, and robust with respect to data noise. © 2012 Elsevier Inc.

  4. TWO-STAGE OCCLUDED OBJECT RECOGNITION METHOD FOR MICROASSEMBLY

    Institute of Scientific and Technical Information of China (English)

    WANG Huaming; ZHU Jianying

    2007-01-01

    A two-stage object recognition algorithm with the presence of occlusion is presented for microassembly. Coarse localization determines whether template is in image or not and approximately where it is, and fine localization gives its accurate position. In coarse localization, local feature, which is invariant to translation, rotation and occlusion, is used to form signatures. By comparing signature of template with that of image, approximate transformation parameter from template to image is obtained, which is used as initial parameter value for fine localization. An objective function, which is a function of transformation parameter, is constructed in fine localization and minimized to realize sub-pixel localization accuracy. The occluded pixels are not taken into account in objective function, so the localization accuracy will not be influenced by the occlusion.

  5. The CSS and The Two-Staged Methods for Parameter Estimation in SARFIMA Models

    Directory of Open Access Journals (Sweden)

    Erol Egrioglu

    2011-01-01

    Full Text Available Seasonal Autoregressive Fractionally Integrated Moving Average (SARFIMA models are used in the analysis of seasonal long memory-dependent time series. Two methods, which are conditional sum of squares (CSS and two-staged methods introduced by Hosking (1984, are proposed to estimate the parameters of SARFIMA models. However, no simulation study has been conducted in the literature. Therefore, it is not known how these methods behave under different parameter settings and sample sizes in SARFIMA models. The aim of this study is to show the behavior of these methods by a simulation study. According to results of the simulation, advantages and disadvantages of both methods under different parameter settings and sample sizes are discussed by comparing the root mean square error (RMSE obtained by the CSS and two-staged methods. As a result of the comparison, it is seen that CSS method produces better results than those obtained from the two-staged method.

  6. Method of oxygen-enriched two-stage underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Liu Hongtao; Chen Feng; Pan Xia; Yao Kai; Liu Shuqin

    2011-01-01

    Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times. A model test using the oxygen-enriched two-stage coal gasification method was carried out. The composition of the gas produced, the time ratio of the two stages, and the role of the temperature field were analysed. The results show that oxygen-enriched two-stage gasification shortens the time of the first stage and prolongs the time of the second stage. Feed oxygen concentrations of 30%,35%, 40%, 45%, 60%, or 80% gave time ratios (first stage to second stage) of 1:0.12, 1:0.21, 1:0.51, 1:0.64,1:0.90, and 1:4.0 respectively. Cooling rates of the temperature field after steam injection decreased with time from about 19.1-27.4 ℃/min to 2.3-6.8 ℃/min. But this rate increased with increasing oxygen concentrations in the first stage. The caloric value of the syngas improves with increased oxygen concentration in the first stage. Injection of 80% oxygen-enriched air gave gas with the highest caloric value and also gave the longest production time. The caloric value of the gas obtained from the oxygenenriched two-stage gasification method lies in the range from 5.31 MJ/Nm3 to 10.54 MJ/Nm3.

  7. Performance measurement of insurance firms using a two-stage DEA method

    Directory of Open Access Journals (Sweden)

    Raha Jalili Sabet

    2013-01-01

    Full Text Available Measuring the relative performance of insurance firms plays an important role in this industry. In this paper, we present a two-stage data envelopment analysis to measure the performance of insurance firms, which were active over the period of 2006-2010. The proposed study of this paper performs DEA method in two stages where the first stage considers five inputs and three outputs while the second stage considers the outputs of the first stage as the inputs of the second stage and uses three different outputs for this stage. The results of our survey have indicated that while there were 4 efficient insurance firms most other insurances were noticeably inefficient. This means market was monopolized mostly by a limited number of insurance firms and competition was not fare enough to let other firms participate in economy, more efficiently.

  8. FORMATION OF HIGHLY RESISTANT CARBIDE AND BORIDE COATINGS BY A TWO-STAGE DEPOSITION METHOD

    Directory of Open Access Journals (Sweden)

    W. I. Sawich

    2011-01-01

    Full Text Available A study was made of the aspects of forming highly resistant coatings in the surface zone of tool steels and solid carbide inserts by a two-stage method. at the first stage of the method, pure Ta or Nb coatings were electrodeposited on samples of tool steel and solid carbide insert in a molten salt bath containing Ta and Nb fluorides. at the second stage, the electrodeposited coating of Ta (Nb was subjected to carburizing or boriding to form carbide (TaC, NbC or boride (TaB, NbB cladding layers.

  9. Two-Stage Orthogonal Least Squares Methods for Neural Network Construction.

    Science.gov (United States)

    Zhang, Long; Li, Kang; Bai, Er-Wei; Irwin, George W

    2015-08-01

    A number of neural networks can be formulated as the linear-in-the-parameters models. Training such networks can be transformed to a model selection problem where a compact model is selected from all the candidates using subset selection algorithms. Forward selection methods are popular fast subset selection approaches. However, they may only produce suboptimal models and can be trapped into a local minimum. More recently, a two-stage fast recursive algorithm (TSFRA) combining forward selection and backward model refinement has been proposed to improve the compactness and generalization performance of the model. This paper proposes unified two-stage orthogonal least squares methods instead of the fast recursive-based methods. In contrast to the TSFRA, this paper derives a new simplified relationship between the forward and the backward stages to avoid repetitive computations using the inherent orthogonal properties of the least squares methods. Furthermore, a new term exchanging scheme for backward model refinement is introduced to reduce computational demand. Finally, given the error reduction ratio criterion, effective and efficient forward and backward subset selection procedures are proposed. Extensive examples are presented to demonstrate the improved model compactness constructed by the proposed technique in comparison with some popular methods.

  10. A two-stage method to determine optimal product sampling considering dynamic potential market.

    Science.gov (United States)

    Hu, Zhineng; Lu, Wei; Han, Bing

    2015-01-01

    This paper develops an optimization model for the diffusion effects of free samples under dynamic changes in potential market based on the characteristics of independent product and presents a two-stage method to figure out the sampling level. The impact analysis of the key factors on the sampling level shows that the increase of the external coefficient or internal coefficient has a negative influence on the sampling level. And the changing rate of the potential market has no significant influence on the sampling level whereas the repeat purchase has a positive one. Using logistic analysis and regression analysis, the global sensitivity analysis gives a whole analysis of the interaction of all parameters, which provides a two-stage method to estimate the impact of the relevant parameters in the case of inaccuracy of the parameters and to be able to construct a 95% confidence interval for the predicted sampling level. Finally, the paper provides the operational steps to improve the accuracy of the parameter estimation and an innovational way to estimate the sampling level.

  11. Selective capsulotomies of the expanded breast as a remodelling method in two-stage breast reconstruction.

    Science.gov (United States)

    Grimaldi, Luca; Campana, Matteo; Brandi, Cesare; Nisi, Giuseppe; Brafa, Anna; Calabrò, Massimiliano; D'Aniello, Carlo

    2013-06-01

    The two-stage breast reconstruction with tissue expander and prosthesis is nowadays a common method for achieving a satisfactory appearance in selected patients who had a mastectomy, but its most common aesthetic drawback is represented by an excessive volumetric increment of the superior half of the reconstructed breast, with a convexity of the profile in that area. A possible solution to limit this effect, and to fulfil the inferior pole, may be obtained by reducing the inferior tissue resistance by means of capsulotomies. This study reports the effects of various types of capsulotomies, performed in 72 patients after removal of the mammary expander, with the aim of emphasising the convexity of the inferior mammary aspect in the expanded breast. According to each kind of desired modification, possible solutions are described. On the basis of subjective and objective evaluations, an overall high degree of satisfaction has been evidenced. The described selective capsulotomies, when properly carried out, may significantly improve the aesthetic results in two-stage reconstructed breasts, with no additional scars, with minimal risks, and with little lengthening of the surgical time.

  12. Two-Stage Over-the-Air (OTA Test Method for LTE MIMO Device Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Ya Jing

    2012-01-01

    Full Text Available With MIMO technology being adopted by the wireless communication standards LTE and HSPA+, MIMO OTA research has attracted wide interest from both industry and academia. Parallel studies are underway in COST2100, CTIA, and 3GPP RAN WG4. The major test challenge for MIMO OTA is how to create a repeatable scenario which accurately reflects the MIMO antenna radiation performance in a realistic wireless propagation environment. Different MIMO OTA methods differ in the way to reproduce a specified MIMO channel model. This paper introduces a novel, flexible, and cost-effective method for measuring MIMO OTA using a two-stage approach. In the first stage, the antenna pattern is measured in an anechoic chamber using a nonintrusive approach, that is without cabled connections or modifying the device. In the second stage, the antenna pattern is convolved with the chosen channel model in a channel emulator to measure throughput using a cabled connection.

  13. A Two-stage Tuning Method of Servo Parameters for Feed Drives in Machine Tools

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the evaluation of dynamic performance for feed drives in machine tools, this paper presents a two-stage tuning method of servo parameters. In the first stage, the evaluation of dynamic performance, parameter tuning and optimization on a mechatronic integrated system simulation platform of feed drives are performed. As a result, a servo parameter combination is acquired. In the second stage, the servo parameter combination from the first stage is set and tuned further in a real machine tool whose dynamic performance is measured and evaluated using the cross grid encoder developed by Heidenhain GmbH. A case study shows that this method simplifies the test process effectively and results in a good dynamic performance in a real machine tool.

  14. A two-stage heuristic method for vehicle routing problem with split deliveries and pickups

    Institute of Scientific and Technical Information of China (English)

    Yong WANG; Xiao-lei MA; Yun-teng LAO; Hai-yan YU; Yong LIU

    2014-01-01

    The vehicle routing problem (VRP) is a well-known combinatorial optimization issue in transportation and logistics network systems. There exist several limitations associated with the traditional VRP. Releasing the restricted conditions of traditional VRP has become a research focus in the past few decades. The vehicle routing problem with split deliveries and pickups (VRPSPDP) is particularly proposed to release the constraints on the visiting times per customer and vehicle capacity, that is, to allow the deliveries and pickups for each customer to be simultaneously split more than once. Few studies have focused on the VRPSPDP problem. In this paper we propose a two-stage heuristic method integrating the initial heuristic algorithm and hybrid heuristic algorithm to study the VRPSPDP problem. To validate the proposed algorithm, Solomon benchmark datasets and extended Solomon benchmark datasets were modified to compare with three other popular algorithms. A total of 18 datasets were used to evaluate the effectiveness of the proposed method. The computational results indicated that the proposed algorithm is superior to these three algorithms for VRPSPDP in terms of total travel cost and average loading rate.

  15. Two-stage method for purification of ceruloplasmin based on its interaction with neomycin.

    Science.gov (United States)

    Sokolov, A V; Kostevich, V A; Romanico, D N; Zakharova, E T; Vasilyev, V B

    2012-06-01

    A two-stage chromatography that yields highly purified ceruloplasmin (CP) from human plasma and from rat and rabbit serum is described. The isolation procedure is based on the interaction of CP with neomycin, and it provides a high yield of CP. Constants of inhibition by gentamycin, kanamycin, and neomycin of oxidase activity of CP in its reaction with p-phenylenediamine were assayed. The lowest K(i) for neomycin (11 µM) corresponded to the highest specific adsorption of CP on neomycin-agarose (10 mg CP/ml of resin). Isolation of CP from 1.4 liters of human plasma using ion-exchange chromatography on UNO-Sphere Q and affinity chromatography on neomycin-agarose yields 348 mg of CP with 412-fold purification degree. Human CP preparation obtained with A(610)/A(280) ~ 0.052 contained neither immunoreactive prothrombin nor active thrombin. Upon storage at 37°C under sterile conditions, the preparation remained stable for two months. Efficient preparation of highly purified CP from rat and rabbit sera treated according to a similar protocol suggests the suitability of our method for isolation of CP from plasma and serum of other animals. The yield of CP in three separate purifications was no less than 78%.

  16. A Two-Stage Compression Method for the Fault Detection of Roller Bearings

    Directory of Open Access Journals (Sweden)

    Huaqing Wang

    2016-01-01

    Full Text Available Data measurement of roller bearings condition monitoring is carried out based on the Shannon sampling theorem, resulting in massive amounts of redundant information, which will lead to a big-data problem increasing the difficulty of roller bearing fault diagnosis. To overcome the aforementioned shortcoming, a two-stage compressed fault detection strategy is proposed in this study. First, a sliding window is utilized to divide the original signals into several segments and a selected symptom parameter is employed to represent each segment, through which a symptom parameter wave can be obtained and the raw vibration signals are compressed to a certain level with the faulty information remaining. Second, a fault detection scheme based on the compressed sensing is applied to extract the fault features, which can compress the symptom parameter wave thoroughly with a random matrix called the measurement matrix. The experimental results validate the effectiveness of the proposed method and the comparison of the three selected symptom parameters is also presented in this paper.

  17. A two-stage method for microcalcification cluster segmentation in mammography by deformable models

    Energy Technology Data Exchange (ETDEWEB)

    Arikidis, N.; Kazantzi, A.; Skiadopoulos, S.; Karahaliou, A.; Costaridou, L., E-mail: costarid@upatras.gr [Department of Medical Physics, School of Medicine, University of Patras, Patras 26504 (Greece); Vassiou, K. [Department of Anatomy, School of Medicine, University of Thessaly, Larissa 41500 (Greece)

    2015-10-15

    Purpose: Segmentation of microcalcification (MC) clusters in x-ray mammography is a difficult task for radiologists. Accurate segmentation is prerequisite for quantitative image analysis of MC clusters and subsequent feature extraction and classification in computer-aided diagnosis schemes. Methods: In this study, a two-stage semiautomated segmentation method of MC clusters is investigated. The first stage is targeted to accurate and time efficient segmentation of the majority of the particles of a MC cluster, by means of a level set method. The second stage is targeted to shape refinement of selected individual MCs, by means of an active contour model. Both methods are applied in the framework of a rich scale-space representation, provided by the wavelet transform at integer scales. Segmentation reliability of the proposed method in terms of inter and intraobserver agreements was evaluated in a case sample of 80 MC clusters originating from the digital database for screening mammography, corresponding to 4 morphology types (punctate: 22, fine linear branching: 16, pleomorphic: 18, and amorphous: 24) of MC clusters, assessing radiologists’ segmentations quantitatively by two distance metrics (Hausdorff distance—HDIST{sub cluster}, average of minimum distance—AMINDIST{sub cluster}) and the area overlap measure (AOM{sub cluster}). The effect of the proposed segmentation method on MC cluster characterization accuracy was evaluated in a case sample of 162 pleomorphic MC clusters (72 malignant and 90 benign). Ten MC cluster features, targeted to capture morphologic properties of individual MCs in a cluster (area, major length, perimeter, compactness, and spread), were extracted and a correlation-based feature selection method yielded a feature subset to feed in a support vector machine classifier. Classification performance of the MC cluster features was estimated by means of the area under receiver operating characteristic curve (Az ± Standard Error) utilizing

  18. A cause and effect two-stage BSC-DEA method for measuring the relative efficiency of organizations

    Directory of Open Access Journals (Sweden)

    Seyed Esmaeel Najafi

    2011-01-01

    Full Text Available This paper presents an integration of balanced score card (BSE with two-stage data envelopment analysis (DEA. The proposed model of this paper uses different financial and non-financial perspectives to evaluate the performance of decision making units in different BSC stages. At each stage, a two-stage DEA method is implemented to measure the relative efficiency of decision making units and the results are monitored using the cause and effect relationships. An empirical study for a banking sector is also performed using the method developed in this paper and the results are briefly analyzed.

  19. A Two-Stage State Recognition Method for Asynchronous SSVEP-Based Brain-Computer Interface System

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zimu; DENG Zhidong

    2013-01-01

    A two-stage state recognition method is proposed for asynchronous SSVEP (steady-state visual evoked potential) based brain-computer interface (SBCI) system.The two-stage method is composed of the idle state (IS) detection and control state (CS) discrimination modules.Based on blind source separation and continuous wavelet transform techniques,the proposed method integrates functions of multi-electrode spatial filtering and feature extraction.In IS detection module,a method using the ensemble IS feature is proposed.In CS discrimination module,the ensemble CS feature is designed as feature vector for control intent classification.Further,performance comparisons are investigated among our IS detection module and other existing ones.Also the experimental results validate the satisfactory performance of our CS discrimination module.

  20. A Two-Stage Bayesian Network Method for 3D Human Pose Estimation from Monocular Image Sequences

    Directory of Open Access Journals (Sweden)

    Wang Yuan-Kai

    2010-01-01

    Full Text Available Abstract This paper proposes a novel human motion capture method that locates human body joint position and reconstructs the human pose in 3D space from monocular images. We propose a two-stage framework including 2D and 3D probabilistic graphical models which can solve the occlusion problem for the estimation of human joint positions. The 2D and 3D models adopt directed acyclic structure to avoid error propagation of inference. Image observations corresponding to shape and appearance features of humans are considered as evidence for the inference of 2D joint positions in the 2D model. Both the 2D and 3D models utilize the Expectation Maximization algorithm to learn prior distributions of the models. An annealed Gibbs sampling method is proposed for the two-stage method to inference the maximum posteriori distributions of joint positions. The annealing process can efficiently explore the mode of distributions and find solutions in high-dimensional space. Experiments are conducted on the HumanEva dataset with image sequences of walking motion, which has challenges of occlusion and loss of image observations. Experimental results show that the proposed two-stage approach can efficiently estimate more accurate human poses.

  1. Photoluminescence properties of lead selenide produced by selenization and a solvothermal method

    Science.gov (United States)

    Kim, Jungdong; Ahn, Hak-Young; Kim, Seung Gi; Oh, Eunsoon; Ju, Byeong-Kwon; Choi, Won Jun; Cho, So-Hye

    2017-01-01

    We studied temperature-dependent photoluminescence (PL) spectra of lead selenide (PbSe) dendrites and cubes grown by a solvothermal method. Their PL peaks were located at ˜8 μm at 10 K with a full width at half maximum (FWHM) of 10 meV. Using the temperature-dependent FWHM values, we obtained carrier-phonon coupling coefficients for PbSe. We also demonstrated mechanochemical synthesis of polycrystalline PbS nanoparticles and their successful conversion into a PbSe layer composed of nanocrystals by a selenization process with thermal treatment. The nanocrystals were found to be formed by the orientation alignment of small grains in the process. The PL peak energies of the PbSe layers as well as the PbSe dendrites and the cubes agreed well with their absorption edges in the transmission spectra, indicating that the photoluminescence originates from the band-edge emission. The band-edge emissions hold promise for the development of potential mid-infrared light sources using PbSe fabricated by these methods.

  2. Influence of one- or two-stage methods for polymerizing complete dentures on adaptation and teeth movements

    Directory of Open Access Journals (Sweden)

    Moises NOGUEIRA

    Full Text Available Abstract Introduction The quality of complete dentures might be influenced by the method of confection. Objective To evaluate the influence of two different methods of processing muco-supported complete dentures on their adaptation and teeth movements. Material and method Denture confection was assigned in two groups (n=10 for upper and lower arches according to polymerization method: 1 conventional one-stage - a wax trial base was made, teeth were arranged and polymerized; 2 two-stage method - the base was waxed and first polymerized. With the denture base polymerized, the teeth were arranged and then, performed the final polymerization. Teeth movements were evaluated in the distances between incisive (I-I, pre-molars (P-P, molars (M-M, left incisor to left molar (LI-LM and right incisor to right molar (RI-RM. For the adaptation analysis, dentures were cut in three different positions: (A distal face of canines, (B mesial face of the first molars, and (C distal face of second molars. Result Denture bases have shown a significant better adaptation when polymerized in the one-stage procedure for both the upper (p=0.000 and the lower (p=0.000 arches, with region A presenting significant better adaptation than region C. In the upper arch, significant reduction in the distance between I-I was observed in the one-stage technique, while the two-stage technique promoted significant reduction in the RI-RM distance. In the lower arch, one-stage technique promoted significant reduction in the distance for RI-RM and two-stage promoted significant reduction in the LI-LM distance. Conclusion Conventional one-stage method presented the better results for denture adaptation. Both fabrication methods presented some alteration in teeth movements.

  3. Variational Level Set Method for Two-Stage Image Segmentation Based on Morphological Gradients

    Directory of Open Access Journals (Sweden)

    Zemin Ren

    2014-01-01

    Full Text Available We use variational level set method and transition region extraction techniques to achieve image segmentation task. The proposed scheme is done by two steps. We first develop a novel algorithm to extract transition region based on the morphological gradient. After this, we integrate the transition region into a variational level set framework and develop a novel geometric active contour model, which include an external energy based on transition region and fractional order edge indicator function. The external energy is used to drive the zero level set toward the desired image features, such as object boundaries. Due to this external energy, the proposed model allows for more flexible initialization. The fractional order edge indicator function is incorporated into the length regularization term to diminish the influence of noise. Moreover, internal energy is added into the proposed model to penalize the deviation of the level set function from a signed distance function. The results evolution of the level set function is the gradient flow that minimizes the overall energy functional. The proposed model has been applied to both synthetic and real images with promising results.

  4. Two-stage open-loop velocity compensating method applied to multi-mass elastic transmission system

    Directory of Open Access Journals (Sweden)

    Zhang Deli

    2014-02-01

    Full Text Available In this paper, a novel vibration-suppression open-loop control method for multi-mass system is proposed, which uses two-stage velocity compensating algorithm and fuzzy I + P controller. This compensating method is based on model-based control theory in order to provide a damping effect on the system mechanical part. The mathematical model of multi-mass system is built and reduced to estimate the velocities of masses. The velocity difference between adjacent masses is calculated dynamically. A 3-mass system is regarded as the composition of two 2-mass systems in order to realize the two-stage compensating algorithm. Instead of using a typical PI controller in the velocity compensating loop, a fuzzy I + P controller is designed and its input variables are decided according to their impact on the system, which is different from the conventional fuzzy PID controller designing rules. Simulations and experimental results show that the proposed velocity compensating method is effective in suppressing vibration on a 3-mass system and it has a better performance when the designed fuzzy I + P controller is utilized in the control system.

  5. A two-stage adaptive stochastic collocation method on nested sparse grids for multiphase flow in randomly heterogeneous porous media

    Science.gov (United States)

    Liao, Qinzhuo; Zhang, Dongxiao; Tchelepi, Hamdi

    2017-02-01

    A new computational method is proposed for efficient uncertainty quantification of multiphase flow in porous media with stochastic permeability. For pressure estimation, it combines the dimension-adaptive stochastic collocation method on Smolyak sparse grids and the Kronrod-Patterson-Hermite nested quadrature formulas. For saturation estimation, an additional stage is developed, in which the pressure and velocity samples are first generated by the sparse grid interpolation and then substituted into the transport equation to solve for the saturation samples, to address the low regularity problem of the saturation. Numerical examples are presented for multiphase flow with stochastic permeability fields to demonstrate accuracy and efficiency of the proposed two-stage adaptive stochastic collocation method on nested sparse grids.

  6. A two-stage short-term traffic flow prediction method based on AVL and AKNN techniques

    Institute of Scientific and Technical Information of China (English)

    孟梦; 王博彬; 邵春福; 李慧轩; 黃育兆

    2015-01-01

    Short-term traffic flow prediction is one of the essential issues in intelligent transportation systems (ITS). A new two-stage traffic flow prediction method named AKNN-AVL method is presented, which combines an advancedk-nearest neighbor (AKNN) method and balanced binary tree (AVL) data structure to improve the prediction accuracy. The AKNN method uses pattern recognition two times in the searching process, which considers the previous sequences of traffic flow to forecast the future traffic state. Clustering method and balanced binary tree technique are introduced to build case database to reduce the searching time. To illustrate the effects of these developments, the accuracies performance of AKNN-AVL method,k-nearest neighbor (KNN) method and the auto-regressive and moving average (ARMA) method are compared. These methods are calibrated and evaluated by the real-time data from a freeway traffic detector near North 3rd Ring Road in Beijing under both normal and incident traffic conditions. The comparisons show that the AKNN-AVL method with the optimal neighbor and pattern size outperforms both KNN method and ARMA method under both normal and incident traffic conditions. In addition, the combinations of clustering method and balanced binary tree technique to the prediction method can increase the searching speed and respond rapidly to case database fluctuations.

  7. A Reconfigurable Architecture for Rotation Invariant Multi-View Face Detection Based on a Novel Two-Stage Boosting Method

    Directory of Open Access Journals (Sweden)

    Zhengbin Pang

    2009-01-01

    Full Text Available We present a reconfigurable architecture model for rotation invariant multi-view face detection based on a novel two-stage boosting method. A tree-structured detector hierarchy is designed to organize multiple detector nodes identifying pose ranges of faces. We propose a boosting algorithm for training the detector nodes. The strong classifier in each detector node is composed of multiple novelly designed two-stage weak classifiers. With a shared output space of multicomponents vector, each detector node deals with the multidimensional binary classification problems. The design of the hardware architecture which fully exploits the spatial and temporal parallelism is introduced in detail. We also study the reconfiguration of the architecture for finding an appropriate tradeoff among the hardware implementation cost, the detection accuracy, and speed. Experiments on FPGA show that high accuracy and marvelous speed are achieved compared with previous related works. The execution time speedups range from 14.68 to 20.86 for images with size of 160×120 up to 800×600 when our FPGA design (98 MHz is compared with software solution on PC (Pentium 4 2.8 GHz.

  8. PPI-IRO: A two-stage method for protein-protein interaction extraction based on interaction relation ontology

    KAUST Repository

    Li, Chuanxi

    2014-01-01

    Mining Protein-Protein Interactions (PPIs) from the fast-growing biomedical literature resources has been proven as an effective approach for the identifi cation of biological regulatory networks. This paper presents a novel method based on the idea of Interaction Relation Ontology (IRO), which specifi es and organises words of various proteins interaction relationships. Our method is a two-stage PPI extraction method. At fi rst, IRO is applied in a binary classifi er to determine whether sentences contain a relation or not. Then, IRO is taken to guide PPI extraction by building sentence dependency parse tree. Comprehensive and quantitative evaluations and detailed analyses are used to demonstrate the signifi cant performance of IRO on relation sentences classifi cation and PPI extraction. Our PPI extraction method yielded a recall of around 80% and 90% and an F1 of around 54% and 66% on corpora of AIMed and Bioinfer, respectively, which are superior to most existing extraction methods. Copyright © 2014 Inderscience Enterprises Ltd.

  9. Fast detection of lead dioxide (PbO2) in chlorinated drinking water by a two-stage iodometric method.

    Science.gov (United States)

    Zhang, Yan; Zhang, Yuanyuan; Lin, Yi-Pin

    2010-02-15

    Lead dioxide (PbO(2)) is an important corrosion product associated with lead contamination in drinking water. Quantification of PbO(2) in water samples has been proven challenging due to the incomplete dissolution of PbO(2) in sample preservation and digestion. In this study, we present a simple iodometric method for fast detection of PbO(2) in chlorinated drinking water. PbO(2) can oxidize iodide to form triiodide (I(3)(-)), a yellow-colored anion that can be detected by the UV-vis spectrometry. Complete reduction of up to 20 mg/L PbO(2) can be achieved within 10 min at pH 2.0 and KI = 4 g/L. Free chlorine can oxidize iodide and cause interference. However, this interference can be accounted by a two-stage pH adjustment, allowing free chlorine to completely react with iodide at ambient pH followed by sample acidification to pH 2.0 to accelerate the iodide oxidation by PbO(2). This method showed good recoveries of PbO(2) (90-111%) in chlorinated water samples with a concentration ranging from 0.01 to 20 mg/L. In chloraminated water, this method is limited due to incomplete quenching of monochloramine by iodide in neutral to slightly alkaline pH values. The interference of other particles that may be present in the distribution system was also investigated.

  10. A novel two-stage complete repair method for pulmonary atresia with ventricular septal defect and major aortopulmonary collateral arteries

    Institute of Scientific and Technical Information of China (English)

    MEI Ju; DING Fang-bao; ZHU Jia-quan; BAO Chun-rong; XIE Xiao; ZHANG Yun-jiao

    2010-01-01

    Background Pulmonary atresia with ventricular septal defect (PA-VSD) and major aortopulmonary collateral arteries (MAPCAs) remains a challenging complex congenital heart disease nowadays. In the present study, we aimed to develop a two-stage surgical method and to evaluate outcomes of this method in managing PA-VSD and MAPCAs.Methods Between December 2003 and December 2008, 7 female and 4 male patients between the age of 5 and 10 years who were suffering from PA-VSD and MAPCAs were selected and recruited. The native pulmonary artery trunks were absent in all patients; the lungs were solely supplied by major aortopulmonary collaterals, and the numbers of supplied lung segments ranged from 15 to 20 (17.9±1.6). There were a total of 43 MAPCAs in all the patients (3-5 (3.9±0.7) MAPCAs per patient). The accumulated Nakata index was (222.9±29.9) mm~2/m~2 (ranged from 182 to 272). All the patients underwent two sequential operations. Stage one included left major aortopulmonary collateral unifocalization and modified Blalock-Taussig shunt from left posterior lateral thoracotomy; stage two comprised right unifocalization, ligation of the shunt, followed by ventricular septal defect closure and right ventricular outflow tract reconstruction assisted with cardiopulmonary bypass from midline stemotomy.Results All the patients survived the initial surgery, but one of them died of low cardiac output syndrome on the third day after the second operation. Postoperative complications included pneumonia in one case and capillary leak syndrome in another. Postoperative oxygen saturation maintained about 95%-100%, which was significantly higher than pre-operation (P <0.01). During the follow-up period of 3-51 (25.4±15.2) months, there were no late death and no need for re-intervention. All the patients enjoyed their lives with good conditions.Conclusions This two-stage complete repair strategy was well-tolerated and effective with good outcome, thus offering an alternative

  11. Methods to enhance hydrolysis during one and two-stage anaerobic digestion of energy crops and crop residues

    Energy Technology Data Exchange (ETDEWEB)

    Jagadabhi, P. S.

    2011-07-01

    The objective of this thesis was to evaluate methods to enhance hydrolysis (measured as specific SCOD production, g SCOD g-1 VS) during one and two-stage anaerobic digestion (AD) of energy crops and crop residues. Addition of macro (NH{sub 4}Cl), micro nutrients (Fe, Ni, Co and Mo) and leachate replacement during mono-digestion of grass silage in one-stage leach bed reactors (LBRs) enhanced hydrolysis by 18 % (0.56 g SCOD g-1 VS), 7 % (0.45 g SCOD g-1 VS) and 34 % (0.51 g SCOD g-1 VS) respectively compared to respective controls. On the other hand, creating micro-aerobic conditions (at 1 l min-1, 2.5 l of air) did not improve hydrolysis but enhanced VFA production by 4 fold (from 2.2 g l-1 to 9 g l-1). Application of rumen cultures improved hydrolysis by 10 % (0.33 g SCOD g-1 VS) more than control (0.30 g SCOD g-1 VS). Similarly, during two-stage AD in LBR-UASB reactor configuration leachate replacement enhanced hydrolysis in cucumber and grass silage (0.5 g SCOD g-1 VS) than in tomato and common reed (0.35 and 0.15 g SCOD g-1 VS respectively). During co-digestion of grass silage and cow manure at a ratio of 30:70 (VS) in CSTR, re-circulation of alkali treated solid fraction of digestate did not improve the anaerobic biodegradation rates or methane yields. Results from batch experiments showed that methane potential of grass silage varied from 0.28-0.39 m3 CH{sub 4} kg-1 VS{sub added} in all the experiments. On the other hand, methane potentials of the studied crop residues were 0.32 m3 CH{sub 4} kg-1 VS{sub added} for tomato and 0.26 m3 CH{sub 4} kg-1 VS{sub added} for cucumber and common reed. Alkali pretreatment of solids, obtained from digestate (during co-digestion of grass silage and cow manure in one-stage CSTRs), at a low concentration of 20 g NaOH kg-1 VS resulted in higher methane yield (0.34 m3 CH{sub 4} kg-1 VS{sub added}) than the other tested dosages (40 and 60 g NaOH kg-1 VS). Addition of macro nutrient (NH{sub 4}Cl) enhanced methane potential of

  12. A study of the process of two staged anaerobic fermentation as a possible method for purifying sewage

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Y.; Kouama, K.; Matsuo, T.

    1983-01-01

    Great attention has recently been given to the study of the processes of anaerobic fermentation, which may become alternatives to the existing methods for purifying waste waters which use aerobic microorganisms. A series of experimentswere conducted with the use of an artificially prepared liquid (fermented milk and starch) which imitates the waste to be purified, in order to explain the capabilities of the process of two staged anaerobic fermentation (DAS) as a method for purifying waste waters. The industrial system of the process includes: a fermentation vat for acetic fermentation with recirculation of the sediment, a primary settler, a fermentation tank for methane fermentation and a secondary settler. The process was conducted at a loading speed (based on Carbon) from 0.15 to 0.4 kilograms per cubic meter per day at a temperature of 38C. The degree of conversion of the fermented organic substances into volatile organic acids was not a function of the loading speed and was 54 to 57 percent in the acetic fermentation tank, where 95 to 97 percent of the organic material was broken down with the production of methane and carbon dioxide.

  13. Two-Stage Design Method for Enhanced Inductive Energy Transmission with Q-Constrained Planar Square Loops.

    Directory of Open Access Journals (Sweden)

    Akaa Agbaeze Eteng

    Full Text Available Q-factor constraints are usually imposed on conductor loops employed as proximity range High Frequency Radio Frequency Identification (HF-RFID reader antennas to ensure adequate data bandwidth. However, pairing such low Q-factor loops in inductive energy transmission links restricts the link transmission performance. The contribution of this paper is to assess the improvement that is reached with a two-stage design method, concerning the transmission performance of a planar square loop relative to an initial design, without compromise to a Q-factor constraint. The first stage of the synthesis flow is analytical in approach, and determines the number and spacing of turns by which coupling between similar paired square loops can be enhanced with low deviation from the Q-factor limit presented by an initial design. The second stage applies full-wave electromagnetic simulations to determine more appropriate turn spacing and widths to match the Q-factor constraint, and achieve improved coupling relative to the initial design. Evaluating the design method in a test scenario yielded a more than 5% increase in link transmission efficiency, as well as an improvement in the link fractional bandwidth by more than 3%, without violating the loop Q-factor limit. These transmission performance enhancements are indicative of a potential for modifying proximity HF-RFID reader antennas for efficient inductive energy transfer and data telemetry links.

  14. Two-stage method to remove population- and individual-level outliers from longitudinal data in a primary care database.

    Science.gov (United States)

    Welch, C; Petersen, I; Walters, K; Morris, R W; Nazareth, I; Kalaitzaki, E; White, I R; Marston, L; Carpenter, J

    2012-07-01

    PURPOSE: In the UK, primary care databases include repeated measurements of health indicators at the individual level. As these databases encompass a large population, some individuals have extreme values, but some values may also be recorded incorrectly. The challenge for researchers is to distinguish between records that are due to incorrect recording and those which represent true but extreme values. This study evaluated different methods to identify outliers. METHODS: Ten percent of practices were selected at random to evaluate the recording of 513,367 height measurements. Population-level outliers were identified using boundaries defined using Health Survey for England data. Individual-level outliers were identified by fitting a random-effects model with subject-specific slopes for height measurements adjusted for age and sex. Any height measurements with a patient-level standardised residual more extreme than ±10 were identified as an outlier and excluded. The model was subsequently refitted twice after removing outliers at each stage. This method was compared with existing methods of removing outliers. RESULTS: Most outliers were identified at the population level using the boundaries defined using Health Survey for England (1550 of 1643). Once these were removed from the database, fitting the random-effects model to the remaining data successfully identified only 75 further outliers. This method was more efficient at identifying true outliers compared with existing methods. CONCLUSIONS: We propose a new, two-stage approach in identifying outliers in longitudinal data and show that it can successfully identify outliers at both population and individual level. Copyright © 2011 John Wiley & Sons, Ltd. Copyright © 2011 John Wiley & Sons, Ltd.

  15. A novel two-stage discrete crack method based on the screened Poisson equation and local mesh refinement

    Science.gov (United States)

    Areias, P.; Rabczuk, T.; de Sá, J. César

    2016-12-01

    We propose an alternative crack propagation algorithm which effectively circumvents the variable transfer procedure adopted with classical mesh adaptation algorithms. The present alternative consists of two stages: a mesh-creation stage where a local damage model is employed with the objective of defining a crack-conforming mesh and a subsequent analysis stage with a localization limiter in the form of a modified screened Poisson equation which is exempt of crack path calculations. In the second stage, the crack naturally occurs within the refined region. A staggered scheme for standard equilibrium and screened Poisson equations is used in this second stage. Element subdivision is based on edge split operations using a constitutive quantity (damage). To assess the robustness and accuracy of this algorithm, we use five quasi-brittle benchmarks, all successfully solved.

  16. Period-doubling bifurcation in two-stage power factor correction converters using the method of incremental harmonic balance and Floquet theory

    Science.gov (United States)

    Wang, Fa-Qiang; Zhang, Hao; Ma, Xi-Kui

    2012-02-01

    In this paper, period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance (IHB) and Floquet theory. A two-stage power factor correction converter typically employs a cascade configuration of a pre-regulator boost power factor correction converter with average current mode control to achieve a near unity power factor and a tightly regulated post-regulator DC—DC Buck converter with voltage feedback control to regulate the output voltage. Based on the assumption that the tightly regulated post-regulator DC—DC Buck converter is represented as a constant power sink and some other assumptions, the simplified model of the two-stage power factor correction converter is derived and its approximate periodic solution is calculated by the method of IHB. And then, the stability of the system is investigated by using Floquet theory and the stable boundaries are presented on the selected parameter spaces. Finally, some experimental results are given to confirm the effectiveness of the theoretical analysis.

  17. Period-doubling bifurcation in two-stage power factor correction converters using the method of incremental harmonic balance and Floquet theory

    Institute of Scientific and Technical Information of China (English)

    Wang Fa-Qiang; Zhang Hao; Ma Xi-Kui

    2012-01-01

    In this paper,period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance (IHB) and Floquet theory.A two-stage power factor correction converter typically employs a cascade configuration of a pre-regulator boost power factor correction converter with average current mode control to achieve a near unity power factor and a tightly regulated post-regulator DC-DC Buck converter with voltage feedback control to regulate the output voltage. Based on the assumption that the tightly regulated postregulator DC-DC Buck converter is represented as a constant power sink and some other assumptions,the simplified model of the two-stage power factor correction converter is derived and its approximate periodic solution is calculated by the method of IHB.And then,the stability of the system is investigated by using Floquet theory and the stable boundaries are presented on the selected parameter spaces.Finally,some experimental results are given to confirm the effectiveness of the theoretical analysis.

  18. The Semimartingale Approach to Almost Sure Stability Analysis of a Two-Stage Numerical Method for Stochastic Delay Differential Equation

    Directory of Open Access Journals (Sweden)

    Qian Guo

    2014-01-01

    Full Text Available Almost sure exponential stability of the split-step backward Euler (SSBE method applied to an Itô-type stochastic differential equation with time-varying delay is discussed by the techniques based on Doob-Mayer decomposition and semimartingale convergence theorem. Numerical experiments confirm the theoretical analysis.

  19. Could the clinical interpretability of subgroups detected using clustering methods be improved by using a novel two-stage approach?

    DEFF Research Database (Denmark)

    Kent, Peter; Stochkendahl, Mette Jensen; Wulff Christensen, Henrik

    2015-01-01

    is to use statistical clustering techniques, such as Cluster Analysis or Latent Class Analysis, to detect latent relationships between patient characteristics. Influential patient characteristics can come from diverse domains of health, such as pain, activity limitation, physical impairment, social role...... participation, psychological factors, biomarkers and imaging. However, such ‘whole person’ research may result in data-driven subgroups that are complex, difficult to interpret and challenging to recognise clinically. This paper describes a novel approach to applying statistical clustering techniques that may...... improve the clinical interpretability of derived subgroups and reduce sample size requirements. Methods This approach involves clustering in two sequential stages. The first stage involves clustering within health domains and therefore requires creating as many clustering models as there are health...

  20. A Two-Stage Method for Structural Damage Prognosis in Shear Frames Based on Story Displacement Index and Modal Residual Force

    Directory of Open Access Journals (Sweden)

    Asghar Rasouli

    2015-01-01

    Full Text Available A two-stage method is proposed to properly identify the location and the extent of damage in shear frames. In the first stage, a story displacement index (SDI is presented to precisely locate the damage in the shear frame which is calculated using the modal analysis information of the damaged structure. In the second stage, by defining a new objective function, the extent of the actual damage is determined via an imperialist competitive algorithm. The performance of the proposed method is demonstrated by implementing the technique to three examples containing five-, ten-, and twenty-five-story shear frames with noises and without them in modal data. Moreover, the performance of the proposed method has been verified through using a benchmark problem. Numerical results show the high efficiency of the proposed method for accurately identifying the location and the extent of structural damage in shear frames.

  1. Influence of NaOH concentrations on synthesis of pure-form zeolite A from fly ash using two-stage method.

    Science.gov (United States)

    Wang, Chun-Feng; Li, Jian-Sheng; Wang, Lian-Jun; Sun, Xiu-Yun

    2008-06-30

    Synthesis of pure-form zeolite A were investigated using four concentrations of NaOH solution to dissolve Si source form fly ash, and with the addition of Al source, to prepare initial gel. Experimental results demonstrated, for two-stage method, that NaOH concentrations in initial gel played an important role in synthesis of pure-form zeolite A using fly ash as raw materials. Generally, pure-form zeolite A could be synthesized when following conditions were used: NaOH concentrations, 1.67, 5 and 6.67 M; the synthesis temperature, 100 degrees C; the corresponding crystallization time, 340, 250 and 190 min. However, a mixture phases of zeolites A and X were obtained at the condition of 3.33 M NaOH solution during various crystallization times. It was found that the higher NaOH concentration was used, the shorter crystallization time of zeolite A was required and the narrower particle size distribution of zeolite A was achieved. In addition, zeolite A submicron-crystals were first synthesized from fly ash using two-stage method in our study.

  2. SELENE Optics Team

    Science.gov (United States)

    1993-01-01

    The SELENE Optics project was designed to send powerful laser beams into space to repower satellites and to recharge their batteries, as well as sending laser beams to the moon for the same purpose instead of relying on solar power. This project also was intended to be used for repowering extended space flights.

  3. A Computational Model for Two-stage 4K-Pulse Tube Cooler: Part I.Theoretical Model and Numerical Method

    Institute of Scientific and Technical Information of China (English)

    Y.L. Ju; A.T.A.M. de Waele

    2001-01-01

    A new mixed Eulerian-Lagrangian computational model for simulating and visualizing the internal processes and the variations of dynamic parameters of a two-stage pulse tube cooler (PTC) operating at 4 K-temperature region has been developed. We use the Lagrangian method, a set of moving grids, to follow the exact tracks of gas particles as they move with pressure oscillation in the pulse tube to avoid any numerical false diffusion. The Eulerian approach, a set of fixed computational grids, is used to simulate the variations of dynamic parameters in the regenerator. A variety of physical factors, such as real thermal properties of helium, multi-layered magnetic regenerative materials, pressure drop and heat transfer in the regenerator, and heat exchangers, are taken into account in this model. The present modeling is very effective for visualizing the internal physical processes in 4 K-pulse tube coolers.

  4. Optimizing the Two-Stage Supply Chain Inventory Model with Full Information Sharing and Two Backorders Costs Using Hybrid Geometric-Algebraic Method

    Directory of Open Access Journals (Sweden)

    Mohamed E. Seliaman

    2013-01-01

    Full Text Available We consider the case of a two-stage serial supply chain system. This supply chain system involves a single vendor who supplies a single buyer with a single product. The vendor’s production rate is assumed finite. In addition, the demand at the buyer is assumed deterministic. In order to coordinate their replenishment policies and jointly optimize their operational costs, the two supply chain partners fully share their relevant information. For this purpose, we develop an integrated inventory replenishment model assuming linear and fixed backorders costs. Then, we use a hybrid geometric-algebraic method to drive the optimal replenishment policy and the minimum supply chain total cost in a closed form.

  5. Development of a two-stage gene selection method that incorporates a novel hybrid approach using the cuckoo optimization algorithm and harmony search for cancer classification.

    Science.gov (United States)

    Elyasigomari, V; Lee, D A; Screen, H R C; Shaheed, M H

    2017-03-01

    For each cancer type, only a few genes are informative. Due to the so-called 'curse of dimensionality' problem, the gene selection task remains a challenge. To overcome this problem, we propose a two-stage gene selection method called MRMR-COA-HS. In the first stage, the minimum redundancy and maximum relevance (MRMR) feature selection is used to select a subset of relevant genes. The selected genes are then fed into a wrapper setup that combines a new algorithm, COA-HS, using the support vector machine as a classifier. The method was applied to four microarray datasets, and the performance was assessed by the leave one out cross-validation method. Comparative performance assessment of the proposed method with other evolutionary algorithms suggested that the proposed algorithm significantly outperforms other methods in selecting a fewer number of genes while maintaining the highest classification accuracy. The functions of the selected genes were further investigated, and it was confirmed that the selected genes are biologically relevant to each cancer type.

  6. SELENE project status

    Indian Academy of Sciences (India)

    Konishi Hisahiro; Manabu Kato; Susumu Sasaki; Yoshisada Takizawa; Hitoshi Mizutani

    2005-12-01

    SELENE (Selenological and Engineering Explorer) project started as a joint mission of the former ISAS (Institute of Space and Astronautical Science) and the former NASDA (National Space Development Agency: the two organizations were merged into JAXA in 2002) of Japan in 1998. The launch target is rescheduled for 2006 due to delay of completion of launch vehicle, H-IIA. The SELENE project is now under a sustained design phase. The flight model components were manufactured, and the interface tests between the bus-system and the mission instruments were completed by the end of March 2004. The functional checks and calibration for the flight model components are being carried out at present. From the beginning of 2005, the final assembly tests will start.

  7. A two-stage cluster sampling method using gridded population data, a GIS, and Google EarthTM imagery in a population-based mortality survey in Iraq

    Directory of Open Access Journals (Sweden)

    Galway LP

    2012-04-01

    Full Text Available Abstract Background Mortality estimates can measure and monitor the impacts of conflict on a population, guide humanitarian efforts, and help to better understand the public health impacts of conflict. Vital statistics registration and surveillance systems are rarely functional in conflict settings, posing a challenge of estimating mortality using retrospective population-based surveys. Results We present a two-stage cluster sampling method for application in population-based mortality surveys. The sampling method utilizes gridded population data and a geographic information system (GIS to select clusters in the first sampling stage and Google Earth TM imagery and sampling grids to select households in the second sampling stage. The sampling method is implemented in a household mortality study in Iraq in 2011. Factors affecting feasibility and methodological quality are described. Conclusion Sampling is a challenge in retrospective population-based mortality studies and alternatives that improve on the conventional approaches are needed. The sampling strategy presented here was designed to generate a representative sample of the Iraqi population while reducing the potential for bias and considering the context specific challenges of the study setting. This sampling strategy, or variations on it, are adaptable and should be considered and tested in other conflict settings.

  8. An inline surface measurement method for membrane mirror fabrication using two-stage trained Zernike polynomials and elitist teaching-learning-based optimization

    Science.gov (United States)

    Liu, Yang; Chen, Zhenyu; Yang, Zhile; Li, Kang; Tan, Jiubin

    2016-12-01

    The accuracy of surface measurement determines the manufacturing quality of membrane mirrors. Thus, an efficient and accurate measuring method is critical in membrane mirror fabrication. This paper formulates this measurement issue as a surface reconstruction problem and employs two-stage trained Zernike polynomials as an inline measuring tool to solve the optical surface measurement problem in the membrane mirror manufacturing process. First, all terms of the Zernike polynomial are generated and projected to a non-circular region as the candidate model pool. The training data are calculated according to the measured values of distance sensors and the geometrical relationship between the ideal surface and the installed sensors. Then the terms are selected by minimizing the cost function each time successively. To avoid the problem of ill-conditioned matrix inversion by the least squares method, the coefficient of each model term is achieved by modified elitist teaching-learning-based optimization. Subsequently, the measurement precision is further improved by a second stage of model refinement. Finally, every point on the membrane surface can be measured according to this model, providing more the subtle feedback information needed for the precise control of membrane mirror fabrication. Experimental results confirm that the proposed method is effective in a membrane mirror manufacturing system driven by negative pressure, and the measurement accuracy can achieve 15 µm.

  9. Two-stage cyclic enzymatic amplification method for ultrasensitive electrochemical assay of microRNA-21 in the blood serum of gastric cancer patients.

    Science.gov (United States)

    Li, Bingchen; Liu, Fei; Peng, Yuanyuan; Zhou, Yunlei; Fan, Wenxuan; Yin, Huanshun; Ai, Shiyun; Zhang, Xiansheng

    2016-05-15

    MicroRNA (miRNA) is riveting nowadays due to its close relevance to human malignancies. Exploiting a fast and convenient biosensor for sensitive and specific detecting miRNA is necessary and it has significant meaning for oncology. In this work, to understand the relationship between miRNA-21 and gastric cancer, we employ T4 RNA ligase 2 to initiate specific ligation reaction depending on the sequence of target RNA, and T7 exonuclease to catalyze the first stage cyclic enzymatic amplification method (CEAM) specifically, which also resting on the target RNA sequence, and the second stage CEAM to further amplify the response resulting from the initial target RNA. Our two-stage CEAM strategy can detect miRNA-21 as low as 0.36fM with remarkable specificity, and most importantly, it can be used to inspect the expression level of miRNA-21 in blood serum of gastric cancer patients. This will offer new perspective for figuring out the pathways of miRNA-21 involving in cancer.

  10. Two-stage extraction method for flight delay pattern%一种两阶段的航班延误模式提取方法

    Institute of Scientific and Technical Information of China (English)

    孟会芳; 彭怡

    2015-01-01

    For the problem of severer flight delays, based on the relative research achievements in domestic and aboard, this paper proposes a two-stage method for extracting flight delay patterns. Firstly, this method uses the phase-space reconstruction theory and Recurrence Plot to analyze the chaotic characteristics of flight delay rate. Then, after acquiring the delay time subsequences, the Recursive Quantitative Analysis and K-means Clustering technology were used to extract flight delay patterns, and the characteristics of time-varying of flight delay patterns were analyzed. Finally, the example verifies this method can not only effectively extract flight delay patterns, but also can get the time-varying characteristics of the patterns. The result provides managerial and decisive reference of prediction and warning of flight delay for airports and airlines.%针对民航运输系统日益严重的航班延误问题,提出一种两阶段的航班延误模式提取方法.该方法运用相空间重构理论和递归图方法,对航班延误率的混沌特性进行分析.然后,在获取延误率子序列的基础上,结合定量递归分析理论,采用K-means聚类技术提取航班延误模式,并对各种延误模式进行时变分析.实例验证表明,该方法不但能有效地提取航班延误模式,而且可以获取延误模式的时变特征,研究成果对机场和航空公司航班延误预测及预警提供了管理决策依据.

  11. Studying feasibility and effects of a two-stage nursing staff training in residential geriatric care using a 30 month mixed-methods design [ISRCTN24344776

    Directory of Open Access Journals (Sweden)

    Hantikainen Virpi

    2011-05-01

    Full Text Available Abstract Background Transfer techniques and lifting weights often cause back pain and disorders for nurses in geriatric care. The Kinaesthetics care conception claims to be an alternative, yielding benefits for nurses as well as for clients. Starting a multi-step research program on the effects of Kinaesthetics, we assess the feasibility of a two-stage nursing staff training and a pre-post research design. Using quantitative and qualitative success criteria, we address mobilisation from the bed to a chair and backwards, walking with aid and positioning in bed on the staff level as well as on the resident level. In addition, effect estimates should help to decide on and to prepare a controlled trial. Methods/Design Standard basic and advanced Kinaesthetics courses (each comprising four subsequent days and an additional counselling day during the following four months are offered to n = 36 out of 60 nurses in a residential geriatric care home, who are in charge of 76 residents. N = 22 residents needing movement support are participating to this study. On the staff level, measurements include focus group discussions, questionnaires, physical strain self-assessment (Borg scale, video recordings and external observation of patient assistance skills using a specialised instrument (SOPMAS. Questionnaires used on the resident level include safety, comfort, pain, and level of own participation during mobilisation. A functional mobility profile is assessed using a specialised test procedure (MOTPA. Measurements will take place at baseline (T0, after basic training (T1, and after the advanced course (T2. Follow-up focus groups will be offered at T1 and 10 months later (T3. Discussion Ten criteria for feasibility success are established before the trial, assigned to resources (missing data, processes (drop-out of nurses and residents and science (minimum effects criteria. This will help to make rational decision on entering the next stage of the research

  12. Recrystallization method to selenization of thin-film Cu(In,Ga)Se.sub.2 for semiconductor device applications

    Science.gov (United States)

    Albin, David S.; Carapella, Jeffrey J.; Tuttle, John R.; Contreras, Miguel A.; Gabor, Andrew M.; Noufi, Rommel; Tennant, Andrew L.

    1995-07-25

    A process for fabricating slightly Cu-poor thin-films of Cu(In,Ga)Se.sub.2 on a substrate for semiconductor device applications includes the steps of forming initially a slightly Cu-rich, phase separated, mixture of Cu(In,Ga)Se.sub.2 :Cu.sub.x Se on the substrate in solid form followed by exposure of the Cu(In,Ga)Se.sub.2 :Cu.sub.x Se solid mixture to an overpressure of Se vapor and (In,Ga) vapor for deposition on the Cu(In,Ga)Se.sub.2 :Cu.sub.x Se solid mixture while simultaneously increasing the temperature of the solid mixture toward a recrystallization temperature (about 550.degree. C.) at which Cu(In,Ga)Se.sub.2 is solid and Cu.sub.x Se is liquid. The (In,Ga) flux is terminated while the Se overpressure flux and the recrystallization temperature are maintained to recrystallize the Cu.sub.x Se with the (In, Ga) that was deposited during the temperature transition and with the Se vapor to form the thin-film of slightly Cu-poor Cu.sub.x (In,Ga).sub.y Se.sub.z. The initial Cu-rich, phase separated large grain mixture of Cu(In,Ga)Se.sub.2 :Cu.sub.x Se can be made by sequentially depositing or co-depositing the metal precursors, Cu and (In, Ga), on the substrate at room temperature, ramping up the thin-film temperature in the presence of Se overpressure to a moderate anneal temperature (about 450.degree. C.) and holding that temperature and the Se overpressure for an annealing period. A nonselenizing, low temperature anneal at about 100.degree. C. can also be used to homogenize the precursors on the substrates before the selenizing, moderate temperature anneal.

  13. Modulation method for a multiple drive system based on a two-stage direct power conversion topology with reduced input current ripple

    DEFF Research Database (Denmark)

    Klumpner, Christian; Blaabjerg, Frede

    2005-01-01

    A new two-stage multi-drive direct power conversion (DPC) topology suited for multi-drive application is proposed, having an input port for a three-phase power supply and several output ports to connect three-phase loads, which are independently controlled and allow for sine wave in-sine wave out...... patterns of the inversion stages, which have to form two groups, allowing for size reduction of the input current filter. This is validated by experiments on a realistic laboratory prototype, while its limitations are determined by simulations....

  14. Efficient evaluation of small failure probability in high-dimensional groundwater contaminant transport modeling via a two-stage Monte Carlo method: FAILURE PROBABILITY

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiangjiang [Zhejiang Provincial Key Laboratory of Agricultural Resources and Environment, Institute of Soil and Water Resources and Environmental Science, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou China; Li, Weixuan [Pacific Northwest National Laboratory, Richland Washington USA; Lin, Guang [Department of Mathematics and School of Mechanical Engineering, Purdue University, West Lafayette Indiana USA; Zeng, Lingzao [Zhejiang Provincial Key Laboratory of Agricultural Resources and Environment, Institute of Soil and Water Resources and Environmental Science, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou China; Wu, Laosheng [Department of Environmental Sciences, University of California, Riverside California USA

    2017-03-01

    In decision-making for groundwater management and contamination remediation, it is important to accurately evaluate the probability of the occurrence of a failure event. For small failure probability analysis, a large number of model evaluations are needed in the Monte Carlo (MC) simulation, which is impractical for CPU-demanding models. One approach to alleviate the computational cost caused by the model evaluations is to construct a computationally inexpensive surrogate model instead. However, using a surrogate approximation can cause an extra error in the failure probability analysis. Moreover, constructing accurate surrogates is challenging for high-dimensional models, i.e., models containing many uncertain input parameters. To address these issues, we propose an efficient two-stage MC approach for small failure probability analysis in high-dimensional groundwater contaminant transport modeling. In the first stage, a low-dimensional representation of the original high-dimensional model is sought with Karhunen–Loève expansion and sliced inverse regression jointly, which allows for the easy construction of a surrogate with polynomial chaos expansion. Then a surrogate-based MC simulation is implemented. In the second stage, the small number of samples that are close to the failure boundary are re-evaluated with the original model, which corrects the bias introduced by the surrogate approximation. The proposed approach is tested with a numerical case study and is shown to be 100 times faster than the traditional MC approach in achieving the same level of estimation accuracy.

  15. Coal liquefaction process streams characterization and evaluation: Application of liquid chromatographic separation methods to THF-soluble portions of integrated two-stage coal liquefaction resids

    Energy Technology Data Exchange (ETDEWEB)

    Green, J.B.; Pearson, C.D.; Young, L.L.; Green, J.A. (National Inst. for Petroleum and Energy Research, Bartlesville, OK (United States))

    1992-05-01

    This study demonstrated the feasibility of using non-aqueous ion exchange liquid chromatography (NIELC) for the examination of the tetrahydrofuran (THF)-soluble distillation resids and THF-soluble whole oils derived from direct coal liquefaction. The technique can be used to separate the material into a number of acid, base, and neutral fractions. Each of the fractions obtained by NIELC was analyzed and then further fractionated by high-performance liquid chromatography (HPLC). The separation and analysis schemes are given in the accompanying report. With this approach, differences can be distinguished among samples obtained from different process streams in the liquefaction plant and among samples obtained at the same sampling location, but produced from different feed coals. HPLC was directly applied to one THF-soluble whole process oil without the NIELC preparation, with limited success. The direct HPLC technique used was directed toward the elution of the acid species into defined classes. The non-retained neutral and basic components of the oil were not analyzable by the direct HPLC method because of solubility limitations. Sample solubility is a major concern in the application of these techniques.

  16. Classification in two-stage screening.

    Science.gov (United States)

    Longford, Nicholas T

    2015-11-10

    Decision theory is applied to the problem of setting thresholds in medical screening when it is organised in two stages. In the first stage that involves a less expensive procedure that can be applied on a mass scale, an individual is classified as a negative or a likely positive. In the second stage, the likely positives are subjected to another test that classifies them as (definite) positives or negatives. The second-stage test is more accurate, but also more expensive and more involved, and so there are incentives to restrict its application. Robustness of the method with respect to the parameters, some of which have to be set by elicitation, is assessed by sensitivity analysis.

  17. Two stage gear tooth dynamics program

    Science.gov (United States)

    Boyd, Linda S.

    1989-01-01

    The epicyclic gear dynamics program was expanded to add the option of evaluating the tooth pair dynamics for two epicyclic gear stages with peripheral components. This was a practical extension to the program as multiple gear stages are often used for speed reduction, space, weight, and/or auxiliary units. The option was developed for either stage to be a basic planetary, star, single external-external mesh, or single external-internal mesh. The two stage system allows for modeling of the peripherals with an input mass and shaft, an output mass and shaft, and a connecting shaft. Execution of the initial test case indicated an instability in the solution with the tooth paid loads growing to excessive magnitudes. A procedure to trace the instability is recommended as well as a method of reducing the program's computation time by reducing the number of boundary condition iterations.

  18. The construction of two-stage tests

    NARCIS (Netherlands)

    Adema, Jos J.

    1988-01-01

    Although two-stage testing is not the most efficient form of adaptive testing, it has some advantages. In this paper, linear programming models are given for the construction of two-stage tests. In these models, practical constraints with respect to, among other things, test composition, administrat

  19. Residential Two-Stage Gas Furnaces - Do They Save Energy?

    Energy Technology Data Exchange (ETDEWEB)

    Lekov, Alex; Franco, Victor; Lutz, James

    2006-05-12

    Residential two-stage gas furnaces account for almost a quarter of the total number of models listed in the March 2005 GAMA directory of equipment certified for sale in the United States. Two-stage furnaces are expanding their presence in the market mostly because they meet consumer expectations for improved comfort. Currently, the U.S. Department of Energy (DOE) test procedure serves as the method for reporting furnace total fuel and electricity consumption under laboratory conditions. In 2006, American Society of Heating Refrigeration and Air-conditioning Engineers (ASHRAE) proposed an update to its test procedure which corrects some of the discrepancies found in the DOE test procedure and provides an improved methodology for calculating the energy consumption of two-stage furnaces. The objectives of this paper are to explore the differences in the methods for calculating two-stage residential gas furnace energy consumption in the DOE test procedure and in the 2006 ASHRAE test procedure and to compare test results to research results from field tests. Overall, the DOE test procedure shows a reduction in the total site energy consumption of about 3 percent for two-stage compared to single-stage furnaces at the same efficiency level. In contrast, the 2006 ASHRAE test procedure shows almost no difference in the total site energy consumption. The 2006 ASHRAE test procedure appears to provide a better methodology for calculating the energy consumption of two-stage furnaces. The results indicate that, although two-stage technology by itself does not save site energy, the combination of two-stage furnaces with BPM motors provides electricity savings, which are confirmed by field studies.

  20. Two-Stage Modelling Of Random Phenomena

    Science.gov (United States)

    Barańska, Anna

    2015-12-01

    The main objective of this publication was to present a two-stage algorithm of modelling random phenomena, based on multidimensional function modelling, on the example of modelling the real estate market for the purpose of real estate valuation and estimation of model parameters of foundations vertical displacements. The first stage of the presented algorithm includes a selection of a suitable form of the function model. In the classical algorithms, based on function modelling, prediction of the dependent variable is its value obtained directly from the model. The better the model reflects a relationship between the independent variables and their effect on the dependent variable, the more reliable is the model value. In this paper, an algorithm has been proposed which comprises adjustment of the value obtained from the model with a random correction determined from the residuals of the model for these cases which, in a separate analysis, were considered to be the most similar to the object for which we want to model the dependent variable. The effect of applying the developed quantitative procedures for calculating the corrections and qualitative methods to assess the similarity on the final outcome of the prediction and its accuracy, was examined by statistical methods, mainly using appropriate parametric tests of significance. The idea of the presented algorithm has been designed so as to approximate the value of the dependent variable of the studied phenomenon to its value in reality and, at the same time, to have it "smoothed out" by a well fitted modelling function.

  1. A reliable solid phase microextraction-gas chromatography-triple quadrupole mass spectrometry method for the assay of selenomethionine and selenomethylselenocysteine in aqueous extracts: difference between selenized and not-enriched selenium potatoes.

    Science.gov (United States)

    Gionfriddo, Emanuela; Naccarato, Attilio; Sindona, Giovanni; Tagarelli, Antonio

    2012-10-17

    A new analytical approach is exploited in the assay of selenium speciation in selenized and not selenium enriched potatoes based on the widely available solid-phase microextraction (SPME) coupled to-GC-triple quadrupole mass spectrometry (SPME-GC-QqQ MS) method. The assay of selenomethionine (SeMet) and selenomethylselenocysteine (SeMeSeCys) in potatoes here reported provides clues to the effectiveness of SPME technique combined with gas chromatography-tandem mass spectrometry, which could be of general use. For the exploitation of the GC method, the selected analytes were converted into their N(O,S)-alkoxycarbonyl alkyl esters derivatives by direct treatment with alkyl chloroformate in aqueous extracts. The performance of five SPME fibers and three chloroformates were tested in univariate mode and the best results were obtained using the divinylbenzene/carboxen/polydimethylsiloxane fiber and propylchloroformate. The variables affecting the efficiency of SPME analysis were optimized by the multivariate approach of design of experiment (DoE) and, in particular, a central composite design (CCD) was applied. Tandem mass spectrometry in selected reaction monitoring (SRM) has allowed the elimination of matrix interferences, providing reconstructed chromatograms with well-resolved peaks and the achievement of very satisfactory detection and quantification limits. Both precision and recovery of the proposed protocol tested at concentration of 8 and 40 μg kg(-1) (dry matter), offered values ranging from 82.3 to 116.3% and from 8.5 to 13.1% for recovery and precision, respectively. The application of the method to commercial samples of selenized and not selenium enriched potatoes proved that the Se fertilization increases significantly the concentration of these bioavailable selenoamino acids.

  2. Two stage optimization method of cut order planning for apparel mass customization%大批量定制服装裁剪分床计划的两阶段优化方法

    Institute of Scientific and Technical Information of China (English)

    刘艳梅; 颜少聪; 纪杨建; 祁国宁

    2012-01-01

    为解决大批量定制服装生产中裁剪分床计划尺码较多且各尺码数量不规则的问题,建立了裁剪分床计划的数学模型;提出基于概率搜索和遗传算法的两阶段优化方法进行求解,第一阶段随机生成若干满足生产约束的初始裁床铺料层数方案,利用搜索算法结合概率,按投入裁床数量最少的原则得到最优尺码组合方案和相应初始裁床铺料层数方案,第二阶段基于前一阶段得到的最优尺码组合方案,按照满足订单情况下生产多余服装的比例不超过企业允许的最大值原则,利用遗传算法再次优化得到最优裁床铺料层数方案。针对实际生产案例,分别利用本算法和人工经验算法求解并进行比较,结果表明在相同的生产条件下,两阶段优化方法能快速求解出服装裁剪分床方案,减少铺床数、节省面料并降低成本。%To solve the problems of variousness and irregular quantity of Cut Order Planning(COP)sizes in apparel mass customization, the mathematical model was built and two stage optimization method based on probability search and genetic algorithm was proposed. In the first stage, several initial cut table layout plans which satified the production constriction were generated randomly. Combined searching algorithm with probability, the optimal sizes combination plan as well as initial cut table layout plan were obtained according to the principle of minimum number of cut table. In the second stage, the plans obtained from first stage were optimized again by using genetic algo- rithm, and the optimal cut table layout plan was received according to the principle that the producting proportion of redundant apparel not exceeding the allowable maximum value. A practical production case was given and computed separately by two stage method and manual empirical method. The results and comparison showed that the two stage optimization method could rapidly

  3. A comparison of long-term cost and clinical outcomes between the two-stage sequence expander/prosthesis and autologous deep inferior epigastric flap methods for breast reconstruction in a public hospital.

    Science.gov (United States)

    Lagares-Borrego, A; Gacto-Sanchez, P; Infante-Cossio, P; Barrera-Pulido, F; Sicilia-Castro, D; Gomez-Cia, T

    2016-02-01

    Postmastectomy breast reconstruction involves the use of large amounts of hospital resources. This study provides comparative data on the clinical results and long-term economic costs of two methods of breast reconstruction in a public hospital. A prospective cohort study was performed to evaluate the costs incurred by delayed unilateral breast reconstruction performed using either the two-stage sequence expander/prosthesis (E-P) or autologous deep inferior epigastric flap (DIEP) method during 2005-2013 in 134 patients. The major evaluated variables included previous clinical records, history of radiotherapy, and number of surgical procedures. Total costs accounted for both direct intra- and extra-hospital costs derived from the initial reconstruction and those resulting from associated reoperations due to aesthetic retouches and/or complications. Patients undergoing E-P reconstruction required a higher number of surgery sessions to complete the reconstruction (3.07 vs. 2.32, p breast reconstruction using the DIEP method is more cost-effective and involves fewer serious complications that result in reconstruction failure or undesirable aesthetic results. E-P reconstruction presents a higher number of complications that may cause surgical failure or poor outcomes. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  4. 带时间窗的多无人机航迹规划两阶段启发式算法%A Two-stage Heuristic Method for Multi-UAVs Path Planning with Time Windows

    Institute of Scientific and Technical Information of China (English)

    马华伟; 王天晓; 胡笑旋

    2014-01-01

    Path planning of Multi-UAV with time windows is a class of important NP-Hard problems,and the researches on the heuristic methods of the problem are always the key point. In this paper,a UAV-flow model is built,and a two-stage heuristic method is proposed to solve it. In the first phase,a path construction heuristic based on “latest-service-finished-first”is proposed to gain the initial solution,and then the simulated annealing algorithm is used to improve it. Finally the heuristic method is tested on the Solomon Benchmark instances,and the experiment results showed that the method can solve the problem efficiently.%带时间窗的多无人机(Unmanned Aerial Vehicles,简称UAV)航迹规划问题是一类重要的NP-Hard问题,相关启发式算法研究一直是该问题的研究重点和难点。建立了问题的UAV流模型,并提出了一种两阶段启发式算法用于问题求解。算法的第一阶段提出了一种基于“最迟完成服务优先”规则的航迹构造算法,用于获取问题的初始解;第二阶段利用模拟退火算法对初始解进行改进。最后基于Solomon Benchmark数据集对算法进行了测试,实验结果表明该启发式算法可以有效地求解带时间窗的多UAV航迹规划问题。

  5. Two-stage sampling for acceptance testing

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, C.L.; Bryan, M.F.

    1992-09-01

    Sometimes a regulatory requirement or a quality-assurance procedure sets an allowed maximum on a confidence limit for a mean. If the sample mean of the measurements is below the allowed maximum, but the confidence limit is above it, a very widespread practice is to increase the sample size and recalculate the confidence bound. The confidence level of this two-stage procedure is rarely found correctly, but instead is typically taken to be the nominal confidence level, found as if the final sample size had been specified in advance. In typical settings, the correct nominal [alpha] should be between the desired P(Type I error) and half that value. This note gives tables for the correct a to use, some plots of power curves, and an example of correct two-stage sampling.

  6. Two-stage sampling for acceptance testing

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, C.L.; Bryan, M.F.

    1992-09-01

    Sometimes a regulatory requirement or a quality-assurance procedure sets an allowed maximum on a confidence limit for a mean. If the sample mean of the measurements is below the allowed maximum, but the confidence limit is above it, a very widespread practice is to increase the sample size and recalculate the confidence bound. The confidence level of this two-stage procedure is rarely found correctly, but instead is typically taken to be the nominal confidence level, found as if the final sample size had been specified in advance. In typical settings, the correct nominal {alpha} should be between the desired P(Type I error) and half that value. This note gives tables for the correct a to use, some plots of power curves, and an example of correct two-stage sampling.

  7. Two Stage Gear Tooth Dynamics Program

    Science.gov (United States)

    1989-08-01

    cordi - tions and associated iteration prooedure become more complex. This is due to both the increased number of components and to the time for a...solved for each stage in the two stage solution . There are (3 + ntrrber of planets) degrees of freedom fcr eacb stage plus two degrees of freedom...should be devised. It should be noted that this is not minor task. In general, each stage plus an input or output shaft will have 2 times (4 + number

  8. Variation in electrical properties of gamma irradiated cadmium selenate nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, R.P., E-mail: chauhanrpc@gmail.com; Rana, Pallavi, E-mail: prana.phy@gmail.com; Narula, Chetna; Panchal, Suresh; Choudhary, Ritika

    2016-07-15

    Preparation of low-dimensional materials attracts more and more interest in the last few years, mainly due to the wide field of potential commercial applications ranging from life sciences, medicine and biotechnology to communication and electronics. One-dimensional systems are the smallest dimension structures that can be used for efficient transport of electrons and thus expected to be critical to the function and integration of nanoscale devices. Nanowires with well controlled morphology and extremely high aspect ratio can be obtained by replicating a nanoporous polymer ion-track membrane with cylindrical pores of controlled dimensions. With this technique, materials can be deposited within the pores of the membrane by electrochemical reduction of the desired ion. In the present study, cadmium selenate nanowires were synthesized potentiostatically via template method. These synthesized nanowires were then exposed to gamma rays by using a {sup 60}Co source at the Inter University Accelerator Centre, New Delhi, India. Structural, morphological, electrical and elemental characterizations were made in order to analyze the effect of gamma irradiation on the synthesized nanowires. I–V measurements of cadmium selenate nanowires, before and after irradiation were made with the help of Keithley 2400 source meter and Ecopia probe station. A significant change in the electrical conductivity of cadmium selenate nanowires was found after gamma irradiation. The crystallography of the synthesized nanowires was also studied using a Rigaku X-ray diffractrometer equipped with Cu-Kα radiation. XRD patterns of irradiated samples showed no variation in the peak positions or phase change.

  9. Variation in electrical properties of gamma irradiated cadmium selenate nanowires

    Science.gov (United States)

    Chauhan, R. P.; Rana, Pallavi; Narula, Chetna; Panchal, Suresh; Choudhary, Ritika

    2016-07-01

    Preparation of low-dimensional materials attracts more and more interest in the last few years, mainly due to the wide field of potential commercial applications ranging from life sciences, medicine and biotechnology to communication and electronics. One-dimensional systems are the smallest dimension structures that can be used for efficient transport of electrons and thus expected to be critical to the function and integration of nanoscale devices. Nanowires with well controlled morphology and extremely high aspect ratio can be obtained by replicating a nanoporous polymer ion-track membrane with cylindrical pores of controlled dimensions. With this technique, materials can be deposited within the pores of the membrane by electrochemical reduction of the desired ion. In the present study, cadmium selenate nanowires were synthesized potentiostatically via template method. These synthesized nanowires were then exposed to gamma rays by using a 60Co source at the Inter University Accelerator Centre, New Delhi, India. Structural, morphological, electrical and elemental characterizations were made in order to analyze the effect of gamma irradiation on the synthesized nanowires. I-V measurements of cadmium selenate nanowires, before and after irradiation were made with the help of Keithley 2400 source meter and Ecopia probe station. A significant change in the electrical conductivity of cadmium selenate nanowires was found after gamma irradiation. The crystallography of the synthesized nanowires was also studied using a Rigaku X-ray diffractrometer equipped with Cu-Kα radiation. XRD patterns of irradiated samples showed no variation in the peak positions or phase change.

  10. 基于视觉显著性的两阶段采样突变目标跟踪算法%Saliency Based Tracking Method for Abrupt Motions via Two-stage Sampling

    Institute of Scientific and Technical Information of China (English)

    江晓莲; 李翠华; 李雄宗

    2014-01-01

    In this paper, a saliency based tracking method via two-stage sampling is proposed for abrupt motions. Firstly, the visual salience is introduced as a prior knowledge into the Wang-Landau Monte Carlo (WLMC)-based tracking algorithm. By dividing the spatial space into disjoint sub-regions and assigning each sub-region a saliency value, a prior knowledge of the promising regions is obtained;then the saliency values of sub-regions are integrated into the Markov chain Monte Carlo (MCMC) acceptance mechanism to guide effective states sampling. Secondly, considering the abrupt motion sequence contains both abrupt and smooth motions, a two-stage sampling model is brought up into the algorithm. In the first stage, the model detects the motion type of the target. According to the result of the first stage, the model chooses either the saliency-based WLMC method to track abrupt motions or the double-chain MCMC method to track smooth motions of the target in the second stage. The algorithm effciently addresses tracking of abrupt motions while smooth motions are also accurately tracked. Experimental results demonstrate that this approach outperforms the state-of-the-art algorithms on abrupt motion sequence and public benchmark sequence in terms of accuracy and robustness.%针对运动突变目标视觉跟踪问题,提出一种基于视觉显著性的两阶段采样跟踪算法。首先,将视觉显著性信息引入到Wang-Landau 蒙特卡罗(Wang-Landau Monte Carlo, WLMC)跟踪算法中,设计了结合显著性先验的接受函数,利用子区域的显著性值来引导马尔可夫链的构造,通过增大目标出现区粒子的接受概率,提高采样效率;其次,针对运动序列中平滑与突变运动共存的特点,建立两阶段采样模型。其中第一阶段对目标当前运动类型进行判定,第二阶段则根据判定结果采用相应算法。突变运动采用基于视觉显著性的WLMC 算法,平滑运动采用双链

  11. Selene: A Videogame for Learning about the Moon

    Science.gov (United States)

    Wood, C. A.; Reese, D. D.

    2008-06-01

    The Selene game-based, metaphor-enhanced (GaME) learning object prepares players with concrete knowledge of basic lunar geology processes. Selene is embedded within an online research environment studying learning and assessment within videogames.

  12. Condensate from a two-stage gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Henriksen, Ulrik Birk; Hindsgaul, Claus

    2000-01-01

    that the organic compounds and the inhibition effect are very low even before treatment with activated carbon. The moderate inhibition effect relates to a high content of ammonia in the condensate. The nitrifiers become tolerant to the condensate after a few weeks of exposure. The level of organic compounds......Condensate, produced when gas from downdraft biomass gasifier is cooled, contains organic compounds that inhibit nitrifiers. Treatment with activated carbon removes most of the organics and makes the condensate far less inhibitory. The condensate from an optimised two-stage gasifier is so clean...

  13. Two Stage Sibling Cycle Compressor/Expander.

    Science.gov (United States)

    1994-02-01

    vol. 5, p. 424. 11. L. Bauwens and M.P. Mitchell, " Regenerator Analysis: Validation of the MS*2 Stirling Cycle Code," Proc. XVIIIth International...PL-TR--94-1051 PL-TR-- 94-1051 TWO STAGE SIBLING CYCLE COMPRESSOR/EXPANDER Matthew P. Mitchell . Mitchell/ Stirling Machines/Systems, Inc. No\\ 1995...ty. THIS PAGE IS UNCLASSIFIED PL-TR-94-1051 This final report was prepared byMitchell/ Stirling Machines/Systems, Inc., Berkeley, CA under Contract

  14. A two-stage method for cooperative target allocation in UAV teams%多无人机编队协同目标分配的两阶段求解方法

    Institute of Scientific and Technical Information of China (English)

    叶青松; 胡笑旋; 马华伟

    2015-01-01

    Cooperative target allocation in unmanned aerial vehicle (UAV) teams is a class of combina‐torial optimization problems .The conventional methods for solving it can not meet the solving speed requirements in the battlefield environment .A two‐stage target allocation method is proposed ,which decomposes the problem into two stages :allocation at team level and allocation within teams .First , the target allocation at team level is calculated by K‐Medoids algorithm ,so each UAV team targets a cluster .Then the allocations within teams are solved by mixed integer linear programming model and ant colony algorithm ,so each UAV attacks several targets in the cluster .The two‐stage method re‐duces the difficulties in solving cooperative target allocation problem .The simulation results show that the method is feasible and effective ,and it improves the solution efficiency and shortens the solu‐tion time significantly .%多无人机编队协同目标分配是一类组合优化问题,常规的求解方法难以满足战场环境对求解速度的要求。文章提出了一种两阶段目标分配方法,将该问题分解成编队级分配和编队内分配2个阶段。首先通过K‐M edoids聚类算法实现编队级目标分配,将目标簇分配到无人机编队,然后通过混合整数线性规划模型和蚁群算法实现编队内目标分配,将目标分配到无人机。通过两阶段求解,降低多无人机编队协同目标分配问题的求解难度。仿真结果表明,该方法可行且有效,能够提高求解效率,大幅度缩短求解时间。

  15. FREE GRAFT TWO-STAGE URETHROPLASTY FOR HYPOSPADIAS REPAIR

    Institute of Scientific and Technical Information of China (English)

    Zhong-jin Yue; Ling-jun Zuo; Jia-ji Wang; Gan-ping Zhong; Jian-ming Duan; Zhi-ping Wang; Da-shan Qin

    2005-01-01

    Objective To evaluate the effectiveness of free graft transplantation two-stage urethroplasty for hypospadias repair.Methods Fifty-eight cases with different types of hypospadias including 10 subcoronal, 36 penile shaft, 9 scrotal, and 3 perineal were treated with free full-thickness skin graft or (and) buccal mucosal graft transplantation two-stage urethroplasty. Of 58 cases, 45 were new cases, 13 had history of previous failed surgeries. Operative procedure included two stages: the first stage is to correct penile curvature (chordee), prepare transplanting bed, harvest and prepare full-thickness skin graft, buccal mucosal graft, and perform graft transplantation. The second stage is to complete urethroplasty and glanuloplasty.Results After the first stage operation, 56 of 58 cases (96.6%) were successful with grafts healing well, another 2foreskin grafts got gangrened. After the second stage operation on 56 cases, 5 cases failed with newly formed urethras opened due to infection, 8 cases had fistulas, 43 (76.8%) cases healed well.Conclusions Free graft transplantation two-stage urethroplasty for hypospadias repair is a kind of effective treatment with broad indication, comparatively high success rate, less complicationsand good cosmatic results, indicative of various types of hypospadias repair.

  16. Bioconversion of Selenate in Methanogenic Anaerobic Granular Sludge

    NARCIS (Netherlands)

    Astratinei, V.; Hullebusch, van E.D.; Lens, P.N.L.

    2006-01-01

    The capacity of anaerobic granular sludge to remove selenate from contaminated wastewater was investigated. The potential of different types of granular sludge to remove selenate from the liquid phase was compared to that of suspended sludge and contaminated soil and sediment samples. The selenate r

  17. Global Lunar Gravity Field Recovery from SELENE

    Science.gov (United States)

    Matsumoto, Koji; Heki, Kosuke; Hanada, Hideo

    2002-01-01

    Results of numerical simulation are presented to examine the global gravity field recovery capability of the Japanese lunar exploration project SELENE (Selenological and Engineering Explorer) which will be launched in 2005. New characteristics of the SELENE lunar gravimetry include four-way satellite-to-satellite Doppler tracking of main orbiter and differential VLBI tracking of two small free-flier satellites. It is shown that planned satellites configuration will improve lunar gravity field in wide range of wavelength as well as far-side selenoid.

  18. A Two-stage Damage Detection Method with Application to the Phase I ASCE SHM Benchmark Building%基于ASCE SHM Benchmark模型的两阶段结构损伤识别方法

    Institute of Scientific and Technical Information of China (English)

    刘朝; 雷鹰

    2011-01-01

    Recently,a new method has been proposed by the authors for detecting structural local damage under limited input and output measurements. This method can be extended to detect structural local damage in complex structures based on substructure approach. In this paper, based on this structural damage detection and localization method, a two-stage damage detection strategy is developed with application to the ASCE SHM benchmark building to test its efficacy and provide a systemic solution to the Phase Ⅰbenchmark problem far damage detection. In the first stage, an 8-DOF identification model is used to identify the floors and directions ( X or Y) in which damages are present. Then,the detection is focused on the floors where damage occurs. A substructure approach is utilized for damage localization in the second stage. A 12-DOF identification model is used for the substructure containing the damaged structural floors to identify the exact locations of damage. Structural parameters and the unknown inputs are identified by a recursive algorithm based on sequential application of the Kalman extended estimator for the extended state vector and the least squares estimation for the unknown inputs. Only a limited number of measured acceleration responses of the benchmark structure subject to unmeasured excitation inputs are utilized. Damage detection results indicate that the new method can detect and localize various damage patterns of the benchmark problems with good accuracy.%近年来,一种激励未知和输出部分已知条件下结构局部损伤识别的新方法得以提出,这种方法能基于子结构思想进行复杂结构的局部损伤识别,基于此方法,提出两阶段的损伤识别策略,并将其应用于第1阶段ASCESHM benchmark模型的case4的4种损伤识别,以检验此方法的有效性.在第1阶段,提出8-DOF的损伤模型以进行损伤层的定位;第2阶段,利用子结构的思想,提出12-DOF的损伤模型,在包含损伤层的

  19. Two-stage Optimization Method for Network and Load Recovery During Power System Restoration%电力系统恢复后期网架重构和负荷恢复的两阶段优化方法

    Institute of Scientific and Technical Information of China (English)

    廖诗武; 姚伟; 劲宇; 侯云鹤; 李大虎

    2016-01-01

    ABSTRACT:Network and load recovery (NLR) during power system restoration is a complex mixed-integer nonlinear optimization problem, which is difficult to be solved efficiently. To reduce the difficulty and improve the efficiency, this paper proposes a two-stage optimization method to decouple the NLR into a mixed-integer linear optimization problem and a continuous nonlinear optimization problem. In the first stage, the optimal plan for transmission line charging and load pick-ups is determined by mixed-integer linear programming (MILP) based on the DC power flow with frequency characteristics. Then in the second stage, an expanded AC power flow based continuous nonlinear optimization model is established to minimize the recovery time based on the optimal plan determined in the first stage. The 10-machine 39-bus system is used to analyze the efficiency and characteristics of a restoration plan in both single step and whole restoration process. Analysis results reveal that the restoration plans obtained from the proposed method are more efficient than those obtained by heuristic algorithms, while computation time is greatly reduced. Finally, the feasibility of applying the proposed method in a real power grid is validated through the Hubei Southeast Power Grid.%电力系统恢复后期的网架重构和负荷恢复是一个复杂的多步混整非线性规划问题。为了降低其求解难度和提高求解效率,提出一种适用于网架重构和负荷恢复的两阶段优化方法,该方法将网架重构及负荷恢复问题解耦为基于直流潮流的混整线性规划和基于交流潮流的连续非线性规划两阶段优化问题。在第1阶段优化中,利用计及频率影响的直流潮流模型确定最优线路投运及负荷开关投切状态这些离散变量的值,再将其作为第2阶段基于增广交流潮流的连续非线性规划的系统运行条件,通过优化发电机出力及端电压,在确保系统安全的前提下

  20. Two-Stage Damage Detection Method Based on Improved Particle Swarm Optimization Algorithm%基于改进PSO算法的两阶段损伤识别方法

    Institute of Scientific and Technical Information of China (English)

    郭惠勇; 王磊; 李正良

    2011-01-01

    为解决结构多损伤情况下的位置识别和损伤程度判定问题,提出了一种基于改进粒子群优化算法和贝叶斯理论的两阶段损伤识别方法,该方法采用频率和模态应变能作为损伤定位源数据,分别用基于频率改变和基于应变能耗散率的识别方法进行损伤信息的初步提取,再利用贝叶斯融合理论对损伤位置进行较为精确的判定.然后,利用粒子群优化(PSO)算法对损伤位置和程度进行更为精确的二次识别.考虑到简单PSO算法易陷入局部最优解,提出了3种改进措施,即粒子位置突变、最优记忆粒子微搜索和双收敛措施.数值仿真结果表明:采用贝叶斯融合理论可以有效地识别出可能的损伤单元,在此基础上用改进的PSO算法可以更精确地识别损伤的位置和程度,同时采用3种改进措施的PSO算法的识别精度明显优于其他PSO算法和遗传算法.%In order to solve structural multi-damage identification problem, a two-stage identification method based on the particle swarm optimization(PSO) algorithm and the Bayesian theory was proposed. In this method, structural modal strain energy (MSE) and frequency are considered as two information sources, and the methods based on frequency change and MSE dissipation ratio are utilized to extract damage information. Then, the Bayesian theory is utilized to integrate the two information sources and preliminarily detect structural damage locations. Finally, the PSO algorithm is adopted to precisely identify structural damage locations and extents. In order to improve the identification results of a simple PSO algorithm, three improved strategies, particle position mutation, elitist micro-search and double convergence criterion, were presented. The simulation results for a two-dimensional truss structure show that the Bayesian theory can identify the suspected damage locations, the improved PSO algorithm can precisely detect the damage extent, and

  1. Two-stage approach to full Chinese parsing

    Institute of Scientific and Technical Information of China (English)

    Cao Hailong; Zhao Tiejun; Yang Muyun; Li Sheng

    2005-01-01

    Natural language parsing is a task of great importance and extreme difficulty. In this paper, we present a full Chinese parsing system based on a two-stage approach. Rather than identifying all phrases by a uniform model, we utilize a divide and conquer strategy. We propose an effective and fast method based on Markov model to identify the base phrases. Then we make the first attempt to extend one of the best English parsing models i.e. the head-driven model to recognize Chinese complex phrases. Our two-stage approach is superior to the uniform approach in two aspects. First, it creates synergy between the Markov model and the head-driven model. Second, it reduces the complexity of full Chinese parsing and makes the parsing system space and time efficient. We evaluate our approach in PARSEVAL measures on the open test set, the parsing system performances at 87.53% precision, 87.95% recall.

  2. Straw Gasification in a Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Hindsgaul, Claus; Henriksen, Ulrik Birk

    2002-01-01

    Additive-prepared straw pellets were gasified in the 100 kW two-stage gasifier at The Department of Mechanical Engineering of the Technical University of Denmark (DTU). The fixed bed temperature range was 800-1000°C. In order to avoid bed sintering, as observed earlier with straw gasification...... residues were examined after the test. No agglomeration or sintering was observed in the ash residues. The tar content was measured both by solid phase amino adsorption (SPA) method and cold trapping (Petersen method). Both showed low tar contents (~42 mg/Nm3 without gas cleaning). The particle content...

  3. Composite likelihood and two-stage estimation in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2002-01-01

    Composite likelihood; Two-stage estimation; Family studies; Copula; Optimal weights; All possible pairs......Composite likelihood; Two-stage estimation; Family studies; Copula; Optimal weights; All possible pairs...

  4. On the robustness of two-stage estimators

    KAUST Repository

    Zhelonkin, Mikhail

    2012-04-01

    The aim of this note is to provide a general framework for the analysis of the robustness properties of a broad class of two-stage models. We derive the influence function, the change-of-variance function, and the asymptotic variance of a general two-stage M-estimator, and provide their interpretations. We illustrate our results in the case of the two-stage maximum likelihood estimator and the two-stage least squares estimator. © 2011.

  5. A Two Stage Classification Approach for Handwritten Devanagari Characters

    CERN Document Server

    Arora, Sandhya; Nasipuri, Mita; Malik, Latesh

    2010-01-01

    The paper presents a two stage classification approach for handwritten devanagari characters The first stage is using structural properties like shirorekha, spine in character and second stage exploits some intersection features of characters which are fed to a feedforward neural network. Simple histogram based method does not work for finding shirorekha, vertical bar (Spine) in handwritten devnagari characters. So we designed a differential distance based technique to find a near straight line for shirorekha and spine. This approach has been tested for 50000 samples and we got 89.12% success

  6. Selen og vitamin E til svin

    DEFF Research Database (Denmark)

    Nielsen, H. E.; Danielsen, V.; Nielsen, Gunnar Gissel;

    1975-01-01

    , kan der let opstå selenmangel. Vitamin E kan i nogen grad erstatte selen, men kun indenfor visse grænser. De senere års erfaringer har tydeligt vist, at der ofte opstår selenmangel, selvom der findes rigeligt E-vitamin i foderet. Resultaterne fra dette forsøg tyder på, at en nedsættelse af...

  7. Microstructural characterization of CIGS formation using different selenization processes

    Science.gov (United States)

    Liao, Kuang-Hsiang; Su, Cherng-Yuh; Ding, Yu-Ting; Koo, Horng-Show

    2013-04-01

    Cu(In1-x,Gax)Se2 (CIGS) thin films were prepared by the sputtering of CuInGa precursors followed by chalcogenization via an isothermal (one-zone) selenization and a two-zone selenization. The effects of two selenization processes on the microstructural characteristics of CIGS films were also studied. In addition, we varied the selenization temperature for the two processes between 450 °C and 580 °C to investigate this effect on the microstructural characteristics and compositions of the CIGS films. The results indicated that the CIGS thin films formed using isothermal selenization had dense grain structure whose grains increased in size after an increase in the selenized temperature. However, the Se/(Cu + In + Ga) ratios of the films indicated that Se was distributed non-uniformly in the films, with Se-saturated CIGS present on the front side of the films and incompletely formed CIGS on the back side. In addition, it was noticed that Ga accumulated in large amounts in the films, depending on the chemical affinity between In and Se. Comparatively, the films prepared using two-zone selenization showed Ga accumulation that was only slightly greater than that in the films fabricated by the isothermal selenization. It is likely that the slow selenization of the CIG precursors reduced the extent of Ga accumulation because of the presence of Se in insufficient amounts. However, the presence of Se in insufficient amounts may also format the CIGS thin films with a porous microstructure.

  8. On Two-stage Seamless Adaptive Design in Clinical Trials

    Directory of Open Access Journals (Sweden)

    Shein-Chung Chow

    2008-12-01

    Full Text Available In recent years, the use of adaptive design methods in clinical research and development based on accrued data has become very popular because of its efficiency and flexibility in modifying trial and/or statistical procedures of ongoing clinical trials. One of the most commonly considered adaptive designs is probably a two-stage seamless adaptive trial design that combines two separate studies into one single study. In many cases, study endpoints considered in a two-stage seamless adaptive design may be similar but different (e.g. a biomarker versus a regular clinical endpoint or the same study endpoint with different treatment durations. In this case, it is important to determine how the data collected from both stages should be combined for the final analysis. It is also of interest to know how the sample size calculation/allocation should be done for achieving the study objectives originally set for the two stages (separate studies. In this article, formulas for sample size calculation/allocation are derived for cases in which the study endpoints are continuous, discrete (e.g. binary responses, and contain time-to-event data assuming that there is a well-established relationship between the study endpoints at different stages, and that the study objectives at different stages are the same. In cases in which the study objectives at different stages are different (e.g. dose finding at the first stage and efficacy confirmation at the second stage and when there is a shift in patient population caused by protocol amendments, the derived test statistics and formulas for sample size calculation and allocation are necessarily modified for controlling the overall type I error at the prespecified level.

  9. Two stage treatment of dairy effluent using immobilized Chlorella pyrenoidosa.

    Science.gov (United States)

    Yadavalli, Rajasri; Heggers, Goutham Rao Venkata Naga

    2013-12-19

    Dairy effluents contains high organic load and unscrupulous discharge of these effluents into aquatic bodies is a matter of serious concern besides deteriorating their water quality. Whilst physico-chemical treatment is the common mode of treatment, immobilized microalgae can be potentially employed to treat high organic content which offer numerous benefits along with waste water treatment. A novel low cost two stage treatment was employed for the complete treatment of dairy effluent. The first stage consists of treating the diary effluent in a photobioreactor (1 L) using immobilized Chlorella pyrenoidosa while the second stage involves a two column sand bed filtration technique. Whilst NH4+-N was completely removed, a 98% removal of PO43--P was achieved within 96 h of two stage purification processes. The filtrate was tested for toxicity and no mortality was observed in the zebra fish which was used as a model at the end of 96 h bioassay. Moreover, a significant decrease in biological oxygen demand and chemical oxygen demand was achieved by this novel method. Also the biomass separated was tested as a biofertilizer to the rice seeds and a 30% increase in terms of length of root and shoot was observed after the addition of biomass to the rice plants. We conclude that the two stage treatment of dairy effluent is highly effective in removal of BOD and COD besides nutrients like nitrates and phosphates. The treatment also helps in discharging treated waste water safely into the receiving water bodies since it is non toxic for aquatic life. Further, the algal biomass separated after first stage of treatment was highly capable of increasing the growth of rice plants because of nitrogen fixation ability of the green alga and offers a great potential as a biofertilizer.

  10. Two-stage dehydration of sugars

    Science.gov (United States)

    Holladay, Johnathan E.; Hu, Jianli; Wang, Yong; Werpy, Todd A.

    2009-11-10

    The invention includes methods for producing dianhydrosugar alcohol by providing an acid catalyst within a reactor and passing a starting material through the reactor at a first temperature. At least a portion of the staring material is converted to a monoanhydrosugar isomer during the passing through the column. The monoanhydrosugar is subjected to a second temperature which is greater than the first to produce a dianhydrosugar. The invention includes a method of producing isosorbide. An initial feed stream containing sorbitol is fed into a continuous reactor containing an acid catalyst at a temperature of less than 120.degree. C. The residence time for the reactor is less than or equal to about 30 minutes. Sorbitol converted to 1,4-sorbitan in the continuous reactor is subsequently provided to a second reactor and is dehydrated at a temperature of at least 120.degree. C. to produce isosorbide.

  11. TWO-STAGE CHARACTER CLASSIFICATION : A COMBINED APPROACH OF CLUSTERING AND SUPPORT VECTOR CLASSIFIERS

    NARCIS (Netherlands)

    Vuurpijl, L.; Schomaker, L.

    2000-01-01

    This paper describes a two-stage classification method for (1) classification of isolated characters and (2) verification of the classification result. Character prototypes are generated using hierarchical clustering. For those prototypes known to sometimes produce wrong classification results, a

  12. Two-stage designs for cross-over bioequivalence trials.

    Science.gov (United States)

    Kieser, Meinhard; Rauch, Geraldine

    2015-07-20

    The topic of applying two-stage designs in the field of bioequivalence studies has recently gained attention in the literature and in regulatory guidelines. While there exists some methodological research on the application of group sequential designs in bioequivalence studies, implementation of adaptive approaches has focused up to now on superiority and non-inferiority trials. Especially, no comparison of the features and performance characteristics of these designs has been performed, and therefore, the question of which design to employ in this setting remains open. In this paper, we discuss and compare 'classical' group sequential designs and three types of adaptive designs that offer the option of mid-course sample size recalculation. A comprehensive simulation study demonstrates that group sequential designs can be identified, which show power characteristics that are similar to those of the adaptive designs but require a lower average sample size. The methods are illustrated with a real bioequivalence study example.

  13. Bioconversion of selenate in methanogenic anaerobic granular sludge.

    Science.gov (United States)

    Astratinei, Violeta; van Hullebusch, Eric; Lens, Piet

    2006-01-01

    The capacity of anaerobic granular sludge to remove selenate from contaminated wastewater was investigated. The potential of different types of granular sludge to remove selenate from the liquid phase was compared to that of suspended sludge and contaminated soil and sediment samples. The selenate removal rates ranged from 400 to 1500 microg g VSS(-1) h(-1), depending on the source of biomass, electron donor, and the initial selenate concentration. The granular structure protects the microorganisms when exposed to high selenate concentrations (0.1 to 1 mM). Anaerobic granular sludge "Eerbeek," originating from a UASB reactor treating paper mill wastewater, removed about 90, 50, and 36% of 0.1, 0.5, and 1 mM of Se, respectively, from the liquid phase when incubated with 20 mM lactate at 30 degrees C and pH 7.5. Selenite, elemental Se (Se(o)), and metal selenide precipitates were the conversion products. Enrichments from the anaerobic granular sludge "Eerbeek" were able to convert 90% of the 10-mM selenate to Se(o) at a rate of 1505 microg Se(VI) g cells(-1) h(-1), a specific growth rate of 0.0125 g cells h(-1), and a yield of 0.083 g cells mg Se(-1). Both microbial metabolic processes (e.g dissimilatory reduction) as well as microbially mediated physicochemical mechanisms (adsorption and precipitation) contribute to the removal of selenate from the Se-containing medium.

  14. Analysis of health trait data from on-farm computer systems in the U.S. II: Comparison of genomic analyses including two-stage and single-step methods

    Science.gov (United States)

    The development of genomic selection methodology, with accompanying substantial gains in reliability for low-heritability traits, may dramatically improve the feasibility of genetic improvement of dairy cow health. Many methods for genomic analysis have now been developed, including the “Bayesian Al...

  15. Treatment of cadmium dust with two-stage leaching process

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The treatment of cadmium dust with a two-stage leaching process was investigated to replace the existing sulphation roast-leaching processes. The process parameters in the first stage leaching were basically similar to the neutralleaching in zinc hydrometallurgy. The effects of process parameters in the second stage leaching on the extraction of zincand cadmium were mainly studied. The experimental results indicated that zinc and cadmium could be efficiently recoveredfrom the cadmium dust by two-stage leaching process. The extraction percentages of zinc and cadmium in two stage leach-ing reached 95% and 88% respectively under the optimum conditions. The total extraction percentage of Zn and Cdreached 94%.

  16. 微波热风两段式干燥法生产婴幼儿保健糯米粉%Production of infant health glutinous rice powder by two stages method of microwave and hot air drying

    Institute of Scientific and Technical Information of China (English)

    李凤霞; 蒋欣欣; 陈守江; 于雷; 江铃

    2012-01-01

    In order to prevent the taste cold empty and abdominal distension diarrhea of infants,the edible traditional Chinese medicine poria cocos,dioscorea opposita thunb,lotus seed,and jujube were added into glutinous rice powder,and then the health glutinous rice powder was developed for infants.The curves of hot air and microwave drying were drawn based on a single factor experiment,and the best drying parameters were determined according to the orthogonal test under two dry optimal conditions,the best proportion of raw materials was determined by other orthogonal experiments.The results showed that the best parameters of dying were microwave 300W,1.5min,and then hot air drying 70℃,2h.The best ratio of raw material was 14g poria cocos and jujube,10g dioscorea opposita thunb,8g lotus seed were added into 100g glutinous rice,and 24% xylitol was added after being smashed.The combination drying method of hot-air drying with microwave drying could effectively keep raw natural composition and good sensory properties when health care glutinous rice powder was produced.%以糯米粉为基料,添加药食同源的中药茯苓、淮山药、莲子、红枣,开发一种能调理婴幼儿脾胃虚寒、腹胀腹泻的即食型糯米粉。依据单因素实验绘制热风和微波干燥曲线,并根据两种干燥的最适条件进行正交实验,确定最佳干燥参数;然后用正交实验对原辅料进行最佳配比实验。结果表明:原辅料最佳配比为100g基料中添加茯苓和红枣各14g,淮山药10g,莲子8g;先用300W微波干燥1.5min,后70℃热风干燥2h;粉碎后添加24%的木糖醇。采用微波热风联合干燥法生产即食型保健糯米粉可有效保持原料固有成分,且具有良好的感官性状。

  17. LOGISTICS SCHEDULING: ANALYSIS OF TWO-STAGE PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    Yung-Chia CHANG; Chung-Yee LEE

    2003-01-01

    This paper studies the coordination effects between stages for scheduling problems where decision-making is a two-stage process. Two stages are considered as one system. The system can be a supply chain that links two stages, one stage representing a manufacturer; and the other, a distributor.It also can represent a single manufacturer, while each stage represents a different department responsible for a part of operations. A problem that jointly considers both stages in order to achieve ideal overall system performance is defined as a system problem. In practice, at times, it might not be feasible for the two stages to make coordinated decisions due to (i) the lack of channels that allow decision makers at the two stages to cooperate, and/or (ii) the optimal solution to the system problem is too difficult (or costly) to achieve.Two practical approaches are applied to solve a variant of two-stage logistic scheduling problems. The Forward Approach is defined as a solution procedure by which the first stage of the system problem is solved first, followed by the second stage. Similarly, the Backward Approach is defined as a solution procedure by which the second stage of the system problem is solved prior to solving the first stage. In each approach, two stages are solved sequentially and the solution generated is treated as a heuristic solution with respect to the corresponding system problem. When decision makers at two stages make decisions locally without considering consequences to the entire system,ineffectiveness may result - even when each stage optimally solves its own problem. The trade-off between the time complexity and the solution quality is the main concern. This paper provides the worst-case performance analysis for each approach.

  18. Effect of selenization conditions on the growth and properties of Cu{sub 2}ZnSn(S,Se){sub 4} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Ranjbar, Samaneh, E-mail: samaneh.ranjbar@ua.pt [I3N- Departamento de Física, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Rajesh Menon, M.R. [I3N- Departamento de Física, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Fernandes, P.A. [I3N- Departamento de Física, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal); Departamento de Física, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072 Porto (Portugal); Cunha, A.F. da [I3N- Departamento de Física, Universidade de Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro (Portugal)

    2015-05-01

    The opto-electronic properties of copper zinc tin sulfide can be tuned to achieve better cell efficiencies by controlled incorporation of selenium. In this paper we report the growth of Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) using a hybrid process involving the sequential evaporation of Zn and sputtering of the sulfide precursors of Cu and Sn, followed by a selenization step. Two approaches for selenization were followed, one using a tubular furnace and the other using a rapid thermal processor. The effects of annealing conditions on the morphological and structural properties of the films were investigated. Scanning electron microscopy and energy dispersive spectroscopy were employed to investigate the morphology and composition of the films. Structural analyses were done using X-ray diffraction (XRD) and Raman spectroscopy. Structural analyses revealed the formation of CZTSSe. This study shows that regardless of the selenization method a temperature above 450 °C is required for conversion of precursors to a compact CZTSSe layer. XRD and Raman analysis suggests that the films selenized in the tubular furnace are selenium rich whereas the samples selenized in the rapid thermal processor have higher sulfur content. - Highlights: • Precursors of Zn/SnS{sub 2}/CuS were prepared by a hybrid evaporation/sputtering system. • The precursors were selenized in a tubular furnace or a rapid thermal processor. • Smoother films with higher sulfur content were obtained by rapid thermal processor.

  19. Maximally efficient two-stage screening: Determining intellectual disability in Taiwanese military conscripts

    Directory of Open Access Journals (Sweden)

    Chia-Chang Chien

    2009-01-01

    Full Text Available Chia-Chang Chien1, Shu-Fen Huang1,2,3,4, For-Wey Lung1,2,3,41Department of Psychiatry, Kaohsiung Armed Forces General Hospital, Kaohsiung, Taiwan; 2Graduate Institute of Behavioral Sciences, Kaohsiung Medical University, Kaohsiung, Taiwan; 3Department of Psychiatry, National Defense Medical Center, Taipei, Taiwan; 4Calo Psychiatric Center, Pingtung County, TaiwanObjective: The purpose of this study was to apply a two-stage screening method for the large-scale intelligence screening of military conscripts.Methods: We collected 99 conscripted soldiers whose educational levels were senior high school level or lower to be the participants. Every participant was required to take the Wisconsin Card Sorting Test (WCST and the Wechsler Adult Intelligence Scale-Revised (WAIS-R assessments.Results: Logistic regression analysis showed the conceptual level responses (CLR index of the WCST was the most significant index for determining intellectual disability (ID; FIQ ≤ 84. We used the receiver operating characteristic curve to determine the optimum cut-off point of CLR. The optimum one cut-off point of CLR was 66; the two cut-off points were 49 and 66. Comparing the two-stage window screening with the two-stage positive screening, the area under the curve and the positive predictive value increased. Moreover, the cost of the two-stage window screening decreased by 59%.Conclusion: The two-stage window screening is more accurate and economical than the two-stage positive screening. Our results provide an example for the use of two-stage screening and the possibility of the WCST to replace WAIS-R in large-scale screenings for ID in the future.Keywords: intellectual disability, intelligence screening, two-stage positive screening, Wisconsin Card Sorting Test, Wechsler Adult Intelligence Scale-Revised

  20. Two-stage local M-estimation of additive models

    Institute of Scientific and Technical Information of China (English)

    JIANG JianCheng; LI JianTao

    2008-01-01

    This paper studies local M-estimation of the nonparametric components of additive models. A two-stage local M-estimation procedure is proposed for estimating the additive components and their derivatives. Under very mild conditions, the proposed estimators of each additive component and its derivative are jointly asymptotically normal and share the same asymptotic distributions as they would be if the other components were known. The established asymptotic results also hold for two particular local M-estimations: the local least squares and least absolute deviation estimations. However,for general two-stage local M-estimation with continuous and nonlinear ψ-functions, its implementation is time-consuming. To reduce the computational burden, one-step approximations to the two-stage local M-estimators are developed. The one-step estimators are shown to achieve the same efficiency as the fully iterative two-stage local M-estimators, which makes the two-stage local M-estimation more feasible in practice. The proposed estimators inherit the advantages and at the same time overcome the disadvantages of the local least-squares based smoothers. In addition, the practical implementation of the proposed estimation is considered in details. Simulations demonstrate the merits of the two-stage local M-estimation, and a real example illustrates the performance of the methodology.

  1. Two-stage local M-estimation of additive models

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper studies local M-estimation of the nonparametric components of additive models.A two-stage local M-estimation procedure is proposed for estimating the additive components and their derivatives.Under very mild conditions,the proposed estimators of each additive component and its derivative are jointly asymptotically normal and share the same asymptotic distributions as they would be if the other components were known.The established asymptotic results also hold for two particular local M-estimations:the local least squares and least absolute deviation estimations.However,for general two-stage local M-estimation with continuous and nonlinear ψ-functions,its implementation is time-consuming.To reduce the computational burden,one-step approximations to the two-stage local M-estimators are developed.The one-step estimators are shown to achieve the same effciency as the fully iterative two-stage local M-estimators,which makes the two-stage local M-estimation more feasible in practice.The proposed estimators inherit the advantages and at the same time overcome the disadvantages of the local least-squares based smoothers.In addition,the practical implementation of the proposed estimation is considered in details.Simulations demonstrate the merits of the two-stage local M-estimation,and a real example illustrates the performance of the methodology.

  2. SELENE - Self-Forming Extensible Lunar EVA Network Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall objective of this research effort (Phase I and Phase II) by Scientific Systems Company, Inc. and BBN Technologies is to develop the SELENE network --...

  3. Rate of oxygen isotope exchange between selenate and water.

    Science.gov (United States)

    Kaneko, Masanori; Poulson, Simon R

    2012-04-17

    The rate of oxygen isotope exchange between selenate and water was investigated at conditions of 10 to 80 °C and pH -0.6 to 4.4. Oxygen isotope exchange proceeds as a first-order reaction, and the exchange rate is strongly affected by reaction temperature and pH, with increased rates of isotope exchange at higher temperature and lower pH. Selenate speciation (HSeO(4)(-) vs SeO(4)(2-)) also has a significant effect on the rate of isotope exchange. The half-life for isotope exchange at example natural conditions (25 °C and pH 7) is estimated to be significantly in excess of 10(6) years. The very slow rate of oxygen isotope exchange between selenate and water under most environmental conditions demonstrates that selenate-δ(18)O signatures produced by biogeochemical processes will be preserved and hence that it will be possible to use the value of selenate-δ(18)O to investigate the biogeochemical behavior of selenate, in an analogous fashion to the use of sulfate-δ(18)O to study the biogeochemical behavior of sulfate.

  4. High potential application in bioremediation of selenate by Proteus hauseri strain QW4

    Directory of Open Access Journals (Sweden)

    Mohaddeseh Khalilian

    2015-10-01

    Full Text Available Background and Objective: Selenium is essential for biological systems at low concentrations and toxic at higher levels. Heavy metals and metalloids such as selenium are major contaminants in 40% of hazardous waste sites. Thus, bioremediation has been considered as an effective means of cleaning up of selenium-contaminated sites.Materials and Methods: In this study, 30 strains were isolated from wastewater samples collected from seleniumcontaminated sites in Qom, Iran using the enrichment culture technique. One bacterial strain designated QW4, identified as Proteus hauseri by morphological, biochemical and 16S rRNA gene sequencing was studied for its ability to tolerate different concentrations of sodium selenate (100-800 mM. Also, the disk diffusion method was performed to determine resistance to some antibioticsResults: Strain QW4 showed maximum minimum inhibitory concentration (MIC to selenate (760 mM. The maximum selenate removal was exhibited at 35 ºC, while the removal activity reduced by 30.7% and 37% at 25 ºC and 40 ºC, respectively. The optimum pH and shaking incubator for removal activity was shown to be 7.0 and 150 rpm, with 60.2% and60.3%, respectively. This bacterial strain was resistant to some antibiotics.Conclusion: The concentration of toxic sodium selenate (1000 μg/ml in the supernatant of the bacterial culture medium decreased by 100% after 2 days and the color of the medium changed to red due to the formation of less toxic elemental selenium. Also, our results imply that heavy metal pollution may contribute to increased antibiotic resistance through indirectselection.

  5. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Ladan Jamshidy

    2016-01-01

    Full Text Available Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL regions by a stereomicroscope using a standard method. Results. The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion. The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

  6. SELENE: The Moon-Orbiting Observatory Mission

    Science.gov (United States)

    Mizutani, H.; Kato, M.; Sasaki, S.; Iijima, Y.; Tanaka, K.; Takizawa, Y.

    The Moon-orbiting SELENE (Selenological and Engineering Explorer) mission is prepared in Japan for lunar science and technology development. The launch target has been changed from 2005 to 2006 because of the launch failure of H2A rocket in 2003. The spacecraft consists of a main orbiting satellite at about 100 km altitude in the polar orbit and two sub-satellites in the elliptical orbits. The scientific objectives of the mission are; 1) study of the origin and evolution of the Moon, 2) in-situ measurement of the lunar environment, and 3) observation of the solar-terrestrial plasma environment. SELENE carries the instruments for scientific investigation, including mapping of lunar topography and surface composition, measurement of the gravity and magnetic fields, and observation of lunar and solar-terrestrial plasma environment. The total mass of scientific payload is about 300 kg. The mission period will be 1 year. If extra fuel is available, the mission will be extended in a lower orbit around 50 km. The elemental abundances are measured by x-ray and gamma-ray spectrometers. Alpha particles from the radon gas and polonium are detected by an alpha particle spectrometer. The mineralogical abundance is characterized by a multi-band imager. The mineralogical composition is identified by a spectral profiler which is a continuous spectral analyzer. The surface topographic data are obtained by a high resolution terrain camera and a laser altimeter. The inside structure up to 5 km below the lunar surface is observed by the radar sounder experiment using a 5 MHz radio wave. A magnetometer and an electron reflectometer provides data on the lunar surface magnetic field. Doppler tracking of the orbiter via the sub-satellite when the orbiter is in the far side is used to determine the gravity field of the far side. Radio sources on the two sub-satellites are used to conduct differential VLBI observation from the ground stations. The lunar environment of high energy particles

  7. STARS A Two Stage High Gain Harmonic Generation FEL Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    M. Abo-Bakr; W. Anders; J. Bahrdt; P. Budz; K.B. Buerkmann-Gehrlein; O. Dressler; H.A. Duerr; V. Duerr; W. Eberhardt; S. Eisebitt; J. Feikes; R. Follath; A. Gaupp; R. Goergen; K. Goldammer; S.C. Hessler; K. Holldack; E. Jaeschke; Thorsten Kamps; S. Klauke; J. Knobloch; O. Kugeler; B.C. Kuske; P. Kuske; A. Meseck; R. Mitzner; R. Mueller; M. Neeb; A. Neumann; K. Ott; D. Pfluckhahn; T. Quast; M. Scheer; Th. Schroeter; M. Schuster; F. Senf; G. Wuestefeld; D. Kramer; Frank Marhauser

    2007-08-01

    BESSY is proposing a demonstration facility, called STARS, for a two-stage high-gain harmonic generation free electron laser (HGHG FEL). STARS is planned for lasing in the wavelength range 40 to 70 nm, requiring a beam energy of 325 MeV. The facility consists of a normal conducting gun, three superconducting TESLA-type acceleration modules modified for CW operation, a single stage bunch compressor and finally a two-stage HGHG cascaded FEL. This paper describes the faciliy layout and the rationale behind the operation parameters.

  8. Dynamic Modelling of the Two-stage Gasification Process

    DEFF Research Database (Denmark)

    Gøbel, Benny; Henriksen, Ulrik B.; Houbak, Niels

    1999-01-01

    A two-stage gasification pilot plant was designed and built as a co-operative project between the Technical University of Denmark and the company REKA.A dynamic, mathematical model of the two-stage pilot plant was developed to serve as a tool for optimising the process and the operating conditions...... of the gasification plant.The model consists of modules corresponding to the different elements in the plant. The modules are coupled together through mass and heat conservation.Results from the model are compared with experimental data obtained during steady and unsteady operation of the pilot plant. A good...

  9. Effects of Ga accumulation on the microstructure of Cu(In{sub 1−x},Ga{sub x})Se{sub 2} thin films during selenization

    Energy Technology Data Exchange (ETDEWEB)

    Liao, Kuang-Hsiang; Su, Cherng-Yuh, E-mail: cysu@ntut.edu.tw; Ding, Yu-Ting

    2013-12-25

    Highlights: •CIGS films showed distinct structures in the observation of cross section. •CIGS films is strongly affected by the choice of preparation of CIG precursors. •CIG alloy precursors resulted in the phase separation in the CIGS thin films. •CuGa/In stacked precursors showed the single phase CIGS at high selenized temperature. •Ga accumulation in large amounts in the films depends on the selenization temperature. -- Abstract: Cu(In{sub 1−x},Ga{sub x})Se{sub 2} (CIGS) thin films were prepared by the sputtering of CuInGa (CIG) alloy precursors and CuGa/In stacked precursors followed by selenization. The effects of the using CIG precursors prepared by various methods and that of use of various selenization temperatures on the microstructural characteristics of CIGS thin films were investigated and the nature of phase transformation and Ga accumulation are discussed. Observation of the cross section morphologies revealed that the CIGS thin films prepared from CIG alloy precursors show two distinct types of structure. In addition, Ga was found to accumulate in high concentrations in the films. The X-ray diffraction (XRD) patterns of the films indicated the coexistence of CuInSe{sub 2} (CIS) and CIGS phases at low selenization temperatures. However, the CIGS phase seemed to disappear when the selenization temperature was increased to 580 °C. In comparison, the films prepared from CuGa/In stacked precursors also showed Ga accumulation after selenization. Surprisingly, the distinct structure of the films improved when the selenization temperature was increased to 580 °C. The XRD patterns of the films showed that the CIS and Ga-rich CIGS phases coexisted at low selenization temperatures. When the selenization temperature was increased to 580 °C, the positions of the CIS and Ga-rich CIGS peaks seemed to mix and shift to the position of Cu(In{sub 0.7},Ga{sub 0.3})Se{sub 2}.

  10. Effects of earthworm casts and zeolite on the two-stage composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2015-05-01

    Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21days with the optimized two-stage composting method rather than in the 90-270days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL.

  11. Two-Stage Fuzzy Portfolio Selection Problem with Transaction Costs

    Directory of Open Access Journals (Sweden)

    Yanju Chen

    2015-01-01

    Full Text Available This paper studies a two-period portfolio selection problem. The problem is formulated as a two-stage fuzzy portfolio selection model with transaction costs, in which the future returns of risky security are characterized by possibility distributions. The objective of the proposed model is to achieve the maximum utility in terms of the expected value and variance of the final wealth. Given the first-stage decision vector and a realization of fuzzy return, the optimal value expression of the second-stage programming problem is derived. As a result, the proposed two-stage model is equivalent to a single-stage model, and the analytical optimal solution of the two-stage model is obtained, which helps us to discuss the properties of the optimal solution. Finally, some numerical experiments are performed to demonstrate the new modeling idea and the effectiveness. The computational results provided by the proposed model show that the more risk-averse investor will invest more wealth in the risk-free security. They also show that the optimal invested amount in risky security increases as the risk-free return decreases and the optimal utility increases as the risk-free return increases, whereas the optimal utility increases as the transaction costs decrease. In most instances the utilities provided by the proposed two-stage model are larger than those provided by the single-stage model.

  12. Efficient Two-Stage Group Testing Algorithms for DNA Screening

    CERN Document Server

    Huber, Michael

    2011-01-01

    Group testing algorithms are very useful tools for DNA library screening. Building on recent work by Levenshtein (2003) and Tonchev (2008), we construct in this paper new infinite classes of combinatorial structures, the existence of which are essential for attaining the minimum number of individual tests at the second stage of a two-stage disjunctive testing algorithm.

  13. High Performance Gasification with the Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Gøbel, Benny; Hindsgaul, Claus; Henriksen, Ulrik Birk

    2002-01-01

    Based on more than 15 years of research and practical experience, the Technical University of Denmark (DTU) and COWI Consulting Engineers and Planners AS present the two-stage gasification process, a concept for high efficiency gasification of biomass producing negligible amounts of tars. In the ......Based on more than 15 years of research and practical experience, the Technical University of Denmark (DTU) and COWI Consulting Engineers and Planners AS present the two-stage gasification process, a concept for high efficiency gasification of biomass producing negligible amounts of tars....... In the two-stage gasification concept, the pyrolysis and the gasification processes are physical separated. The volatiles from the pyrolysis are partially oxidized, and the hot gases are used as gasification medium to gasify the char. Hot gases from the gasifier and a combustion unit can be used for drying...... a cold gas efficiency exceeding 90% is obtained. In the original design of the two-stage gasification process, the pyrolysis unit consists of a screw conveyor with external heating, and the char unit is a fixed bed gasifier. This design is well proven during more than 1000 hours of testing with various...

  14. Composite likelihood and two-stage estimation in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2004-01-01

    In this paper register based family studies provide the motivation for linking a two-stage estimation procedure in copula models for multivariate failure time data with a composite likelihood approach. The asymptotic properties of the estimators in both parametric and semi-parametric models are d...

  15. A two-stage rank test using density estimation

    NARCIS (Netherlands)

    Albers, Willem/Wim

    1995-01-01

    For the one-sample problem, a two-stage rank test is derived which realizes a required power against a given local alternative, for all sufficiently smooth underlying distributions. This is achieved using asymptotic expansions resulting in a precision of orderm −1, wherem is the size of the first

  16. The construction of customized two-stage tests

    NARCIS (Netherlands)

    Adema, Jos J.

    1990-01-01

    In this paper mixed integer linear programming models for customizing two-stage tests are given. Model constraints are imposed with respect to test composition, administration time, inter-item dependencies, and other practical considerations. It is not difficult to modify the models to make them use

  17. Depolarization temperature and piezoelectric properties of Na1/2Bi1/2TiO3–Na1/2Bi1/2(Zn1/3Nb2/3)O3 ceramics by two-stage calcination method

    Indian Academy of Sciences (India)

    Xin-Yu Liu; Chang-Rong Zhou; Zhao-Hui Shan

    2007-12-01

    A new group of NBT-based lead-free piezoelectric ceramics, Na1/2Bi1/2TiO3–Na1/2Bi1/2(Zn1/3Nb2/3)O3, was synthesized using the two-stage calcination method and depolarization temperatures and piezoelectric properties were also investigated. The XRD analysis showed that the ceramics system had a morphotropic phase boundary (MPB) between the rhombohedral and the tetragonal structure. The highest piezoelectric properties of 33 = 97 pC/N and = 0.46 were obtained near MPB compositions. Furthermore, the depolarization temperatures near MPB compositions were slightly decreased and the lowest d was maintained at 210°C.

  18. Two Stage Fully Differential Sample and Hold Circuit Using .18µm Technology

    Directory of Open Access Journals (Sweden)

    Dharmendra Dongardiye

    2014-05-01

    Full Text Available This paper presents a well-established Fully Differential sample & hold circuitry, implemented in 180-nm CMOS technology. In this two stage method the first stage give us very high gain and second stage gives large voltage swing. The proposed opamp provides 149MHz unity-gain bandwidth , 78 degree phase margin and a differential peak to peak output swing more than 2.4v. using the improved fully differential two stage operational amplifier of 76.7dB gain. Although the sample and hold circuit meets the requirements of SNR specifications.

  19. Semimicrodetermination of combined tantalum and niobium with selenous acid

    Science.gov (United States)

    Grimaldi, F.S.; Schnepfe, M.

    1959-01-01

    Tantalum and niobium are separated and determined gravimetrically by precipitation with selenous acid from highly acidic solutions in the absence of complexing agents. Hydrogen peroxide is used in the preparation of the solution and later catalytically destroyed during digestion of the precipitate. From 0.2 to 30 mg., separately or in mixtures, of niobium or tantalum pentoxide can be separated from mixtures containing 100 mg. each of the oxides of scandium, yttrium, cerium, vanadium, molybdenum, iron, aluminum, tin, lead, and bismuth with a single precipitation; and from 30 mg. of titanium dioxide, and 50 mg. each of the oxides of antimony and thorium, when present separately, with three precipitations. At least 50 mg. of uranium(VI) oxide can be separated with a single precipitation when present alone; otherwise, three precipitations may be needed. Zirconium does not interfere when the tantalum and niobium contents of the sample are small, but in general, zirconium as well as tungsten interfere. The method is applied to the determination of the earth acids in tantaloniobate ores.

  20. Square Kilometre Array station configuration using two-stage beamforming

    CERN Document Server

    Jiwani, Aziz; Razavi-Ghods, Nima; Hall, Peter J; Padhi, Shantanu; de Vaate, Jan Geralt bij

    2012-01-01

    The lowest frequency band (70 - 450 MHz) of the Square Kilometre Array will consist of sparse aperture arrays grouped into geographically-localised patches, or stations. Signals from thousands of antennas in each station will be beamformed to produce station beams which form the inputs for the central correlator. Two-stage beamforming within stations can reduce SKA-low signal processing load and costs, but has not been previously explored for the irregular station layouts now favoured in radio astronomy arrays. This paper illustrates the effects of two-stage beamforming on sidelobes and effective area, for two representative station layouts (regular and irregular gridded tile on an irregular station). The performance is compared with a single-stage, irregular station. The inner sidelobe levels do not change significantly between layouts, but the more distant sidelobes are affected by the tile layouts; regular tile creates diffuse, but regular, grating lobes. With very sparse arrays, the station effective area...

  1. Two stage sorption type cryogenic refrigerator including heat regeneration system

    Science.gov (United States)

    Jones, Jack A.; Wen, Liang-Chi; Bard, Steven

    1989-01-01

    A lower stage chemisorption refrigeration system physically and functionally coupled to an upper stage physical adsorption refrigeration system is disclosed. Waste heat generated by the lower stage cycle is regenerated to fuel the upper stage cycle thereby greatly improving the energy efficiency of a two-stage sorption refrigerator. The two stages are joined by disposing a first pressurization chamber providing a high pressure flow of a first refrigerant for the lower stage refrigeration cycle within a second pressurization chamber providing a high pressure flow of a second refrigerant for the upper stage refrigeration cycle. The first pressurization chamber is separated from the second pressurization chamber by a gas-gap thermal switch which at times is filled with a thermoconductive fluid to allow conduction of heat from the first pressurization chamber to the second pressurization chamber.

  2. Income and Poverty across SMSAs: A Two-Stage Analysis

    OpenAIRE

    1993-01-01

    Two popular explanations of urban poverty are the "welfare-disincentive" and "urban-deindustrialization" theories. Using cross-sectional Census data, we develop a two-stage model to predict an SMSAs median family income and poverty rate. The model allows the city's welfare level and industrial structure to affect its median family income and poverty rate directly. It also allows welfare and industrial structure to affect income and poverty indirectly, through their effects on family structure...

  3. Two-Stage MAS Technique for Analysis of DRA Elements and Arrays on Finite Ground Planes

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav

    2007-01-01

    A two-stage Method of Auxiliary Sources (MAS) technique is proposed for analysis of dielectric resonator antenna (DRA) elements and arrays on finite ground planes (FGPs). The problem is solved by first analysing the DRA on an infinite ground plane (IGP) and then using this solution to model the FGP...... problem....

  4. Measuring the Learning from Two-Stage Collaborative Group Exams

    CERN Document Server

    Ives, Joss

    2014-01-01

    A two-stage collaborative exam is one in which students first complete the exam individually, and then complete the same or similar exam in collaborative groups immediately afterward. To quantify the learning effect from the group component of these two-stage exams in an introductory Physics course, a randomized crossover design was used where each student participated in both the treatment and control groups. For each of the two two-stage collaborative group midterm exams, questions were designed to form matched near-transfer pairs with questions on an end-of-term diagnostic which was used as a learning test. For learning test questions paired with questions from the first midterm, which took place six to seven weeks before the learning test, an analysis using a mixed-effects logistic regression found no significant differences in learning-test performance between the control and treatment group. For learning test questions paired with questions from the second midterm, which took place one to two weeks prio...

  5. Forty-five-degree two-stage venous cannula: advantages over standard two-stage venous cannulation.

    Science.gov (United States)

    Lawrence, D R; Desai, J B

    1997-01-01

    We present a 45-degree two-stage venous cannula that confers advantage to the surgeon using cardiopulmonary bypass. This cannula exits the mediastinum under the transverse bar of the sternal retractor, leaving the rostral end of the sternal incision free of apparatus. It allows for lifting of the heart with minimal effect on venous return and does not interfere with the radially laid out sutures of an aortic valve replacement using an interrupted suture technique.

  6. Two-stage unilateral versus one-stage bilateral single-port sympathectomy for palmar and axillary hyperhidrosis†

    Science.gov (United States)

    Ibrahim, Mohsen; Menna, Cecilia; Andreetti, Claudio; Ciccone, Anna Maria; D'Andrilli, Antonio; Maurizi, Giulio; Poggi, Camilla; Vanni, Camilla; Venuta, Federico; Rendina, Erino Angelo

    2013-01-01

    OBJECTIVES Video-assisted thoracoscopic sympathectomy is currently the best treatment for palmar and axillary hyperhidrosis. It can be performed through either one or two stages of surgery. This study aimed to evaluate the operative and postoperative results of two-stage unilateral vs one-stage bilateral thoracoscopic sympathectomy. METHODS From November 1995 to February 2011, 270 patients with severe palmar and/or axillary hyperhidrosis were recruited for this study. One hundred and thirty patients received one-stage bilateral, single-port video-assisted thoracoscopic sympathectomy (one-stage group) and 140, two-stage unilateral, single-port video-assisted thoracoscopic sympathectomy, with a mean time interval of 4 months between the procedures (two-stage group). RESULTS The mean postoperative follow-up period was 12.5 (range: 1–24 months). After surgery, hands and axillae of all patients were dry and warm. Sixteen (12%) patients of the one-stage group and 15 (11%) of the two-stage group suffered from mild/moderate pain (P = 0.8482). The mean operative time was 38 ± 5 min in the one-stage group and 39 ± 8 min in the two-stage group (P = 0.199). Pneumothorax occurred in 8 (6%) patients of the one-stage group and in 11 (8%) of the two-stage group. Compensatory sweating occurred in 25 (19%) patients of the one-stage group and in 6 (4%) of the two-stage group (P = 0.0001). No patients developed Horner's syndrome. CONCLUSIONS Both two-stage unilateral and one-stage bilateral single-port video-assisted thoracoscopic sympathectomies are effective, safe and minimally invasive procedures. Two-stage unilateral sympathectomy can be performed with a lower occurrence of compensatory sweating, improving permanently the quality of life in patients with palmar and axillary hyperhidrosis. PMID:23442937

  7. Two-stage series array SQUID amplifier for space applications

    Science.gov (United States)

    Tuttle, J. G.; DiPirro, M. J.; Shirron, P. J.; Welty, R. P.; Radparvar, M.

    We present test results for a two-stage integrated SQUID amplifier which uses a series array of d.c. SQUIDS to amplify the signal from a single input SQUID. The device was developed by Welty and Martinis at NIST and recent versions have been manufactured by HYPRES, Inc. Shielding and filtering techniques were employed during the testing to minimize the external noise. Energy resolution of 300 h was demonstrated using a d.c. excitation at frequencies above 1 kHz, and better than 500 h resolution was typical down to 300 Hz.

  8. Two-Stage Aggregate Formation via Streams in Myxobacteria

    Science.gov (United States)

    Alber, Mark; Kiskowski, Maria; Jiang, Yi

    2005-03-01

    In response to adverse conditions, myxobacteria form aggregates which develop into fruiting bodies. We model myxobacteria aggregation with a lattice cell model based entirely on short range (non-chemotactic) cell-cell interactions. Local rules result in a two-stage process of aggregation mediated by transient streams. Aggregates resemble those observed in experiment and are stable against even very large perturbations. Noise in individual cell behavior increases the effects of streams and result in larger, more stable aggregates. Phys. Rev. Lett. 93: 068301 (2004).

  9. Two-Stage Fan I: Aerodynamic and Mechanical Design

    Science.gov (United States)

    Messenger, H. E.; Kennedy, E. E.

    1972-01-01

    A two-stage, highly-loaded fan was designed to deliver an overall pressure ratio of 2.8 with an adiabatic efficiency of 83.9 percent. At the first rotor inlet, design flow per unit annulus area is 42 lbm/sec/sq ft (205 kg/sec/sq m), hub/tip ratio is 0.4 with a tip diameter of 31 inches (0.787 m), and design tip speed is 1450 ft/sec (441.96 m/sec). Other features include use of multiple-circular-arc airfoils, resettable stators, and split casings over the rotor tip sections for casing treatment tests.

  10. Two-Stage Eagle Strategy with Differential Evolution

    CERN Document Server

    Yang, Xin-She

    2012-01-01

    Efficiency of an optimization process is largely determined by the search algorithm and its fundamental characteristics. In a given optimization, a single type of algorithm is used in most applications. In this paper, we will investigate the Eagle Strategy recently developed for global optimization, which uses a two-stage strategy by combing two different algorithms to improve the overall search efficiency. We will discuss this strategy with differential evolution and then evaluate their performance by solving real-world optimization problems such as pressure vessel and speed reducer design. Results suggest that we can reduce the computing effort by a factor of up to 10 in many applications.

  11. Phosphoproteomic profiling of selenate-treated Alzheimer's disease model cells.

    Directory of Open Access Journals (Sweden)

    Ping Chen

    Full Text Available The reversible phosphorylation of proteins regulates most biological processes, while abnormal phosphorylation is a cause or consequence of many diseases including Alzheimer's disease (AD. One of the hallmarks of AD is the formation of neurofibrillary tangles (NFTs, which is composed of hyperphosphorylated tau proteins. Sodium selenate has been recently found to reduce tau hyperphosphorylation and NFTs formation, and to improve spatial learning and motor performance in AD mice. In the current study, the phosphoproteomics of N2aSW cells treated with selenate were investigated. To avoid missing low-abundance phosphoproteins, both the total proteins of cells and the phosphor-enriched proteins were extracted and subjected to the two-dimensional gel electrophoresis with Pro-Q diamond staining and then LC-MS/MS analysis. A total of 65 proteins were altered in phosphorylation level, of which 39 were up-regulated and 26 were down-regulated. All identified phosphoproteins were bioinformatically annotated according to their physiochemical features, subcellular location, and biological function. Most of these significantly changed phosphoproteins are involved in crucial neural processes such as protesome activity, oxidative stress, cysteine and methionine metabolism, and energy metabolism. Furthermore, decreases were found in homocysteine, phosphor-tau and amyloid β upon selenate treatment. Our results suggest that selenate may intervene in the pathological process of AD by altering the phosphorylation of some key proteins involved in oxidative stress, energy metabolism and protein degradation, thus play important roles in maintaining redox homeostasis, generating ATP, and clearing misfolded proteins and aggregates. The present paper provides some new clues to the mechanism of selenate in AD prevention.

  12. Investigation of the Lunar Deep Interior by SELENE-2

    Science.gov (United States)

    Sasaki, Sho; Kikuchi, F.; Matsumoto, K.; Noda, H.; Araki, H.; Hanada, H.; Yamada, R.; Kunimori, H.; Iwata, T.; Kawaguchi, N.; Kono, Y.

    2012-10-01

    Measurements of gravity and rotation of planets and satellites are important tools to investigate their internal structure. Lunar surface tidal deformation is small (10cm). But effect of lunar tidal deformation can be detected by gravity change, through degree 2 potential Love number, k2, which could constrain the state of the core (solid or liquid) and viscosity of the lower mantle of the Moon. Dissipations of lunar librations also depend on core and lower mantle states. Liquid metallic core would be caused by significant amount of sulfur to lower core melting temperature, whereas low-viscosity lower mantle would suggest the presence of water. In effect, the pressure level of lunar lower mantle is compatible with that of terrestrial asthenosphere, where water in silicate decreases viscosity significantly. Existence of volatiles in lunar deeper interior would modify lunar evolution scenario of hot origin: from the giant impact through the magma ocean. The k2 is sensitive to the state of deep interior. When the core radius is 350 km, k2 value changes by about 5% between liquid and solid cores. SELENE-2 is a planned lunar lander-orbiter mission by JAXA after successful mission KAGUYA (SELENE). We propose VLBI radio (VRAD) sources both in SELENE-2 lander and orbiter. Using same-beam (or two-beam) multi-frequency VLBI, we will determine orbits of the orbiter precisely, measure low-order gravity changes, and estimate k2 with uncertainty below 1%. If the core size is constrained by SELENE-2 seismometer, contributions of lower mantle and core on k2 would separated. We also propose a Lunar Laser Ranging (LLR) reflector on SELENE-2 lander. With pre-existed reflectors, latitudinal component of lunar libration and its dissipation will be measured. Among LLR parameters, k2 and core oblateness are coupled. Once k2 is fixed, we can determine core oblateness, which would also constrain core and lower mantle states.

  13. Two-stage perceptual learning to break visual crowding.

    Science.gov (United States)

    Zhu, Ziyun; Fan, Zhenzhi; Fang, Fang

    2016-01-01

    When a target is presented with nearby flankers in the peripheral visual field, it becomes harder to identify, which is referred to as crowding. Crowding sets a fundamental limit of object recognition in peripheral vision, preventing us from fully appreciating cluttered visual scenes. We trained adult human subjects on a crowded orientation discrimination task and investigated whether crowding could be completely eliminated by training. We discovered a two-stage learning process with this training task. In the early stage, when the target and flankers were separated beyond a certain distance, subjects acquired a relatively general ability to break crowding, as evidenced by the fact that the breaking of crowding could transfer to another crowded orientation, even a crowded motion stimulus, although the transfer to the opposite visual hemi-field was weak. In the late stage, like many classical perceptual learning effects, subjects' performance gradually improved and showed specificity to the trained orientation. We also found that, when the target and flankers were spaced too finely, training could only reduce, rather than completely eliminate, the crowding effect. This two-stage learning process illustrates a learning strategy for our brain to deal with the notoriously difficult problem of identifying peripheral objects in clutter. The brain first learned to solve the "easy and general" part of the problem (i.e., improving the processing resolution and segmenting the target and flankers) and then tackle the "difficult and specific" part (i.e., refining the representation of the target).

  14. Runway Operations Planning: A Two-Stage Heuristic Algorithm

    Science.gov (United States)

    Anagnostakis, Ioannis; Clarke, John-Paul

    2003-01-01

    The airport runway is a scarce resource that must be shared by different runway operations (arrivals, departures and runway crossings). Given the possible sequences of runway events, careful Runway Operations Planning (ROP) is required if runway utilization is to be maximized. From the perspective of departures, ROP solutions are aircraft departure schedules developed by optimally allocating runway time for departures given the time required for arrivals and crossings. In addition to the obvious objective of maximizing throughput, other objectives, such as guaranteeing fairness and minimizing environmental impact, can also be incorporated into the ROP solution subject to constraints introduced by Air Traffic Control (ATC) procedures. This paper introduces a two stage heuristic algorithm for solving the Runway Operations Planning (ROP) problem. In the first stage, sequences of departure class slots and runway crossings slots are generated and ranked based on departure runway throughput under stochastic conditions. In the second stage, the departure class slots are populated with specific flights from the pool of available aircraft, by solving an integer program with a Branch & Bound algorithm implementation. Preliminary results from this implementation of the two-stage algorithm on real-world traffic data are presented.

  15. Two-Stage Heuristic Algorithm for Aircraft Recovery Problem

    Directory of Open Access Journals (Sweden)

    Cheng Zhang

    2017-01-01

    Full Text Available This study focuses on the aircraft recovery problem (ARP. In real-life operations, disruptions always cause schedule failures and make airlines suffer from great loss. Therefore, the main objective of the aircraft recovery problem is to minimize the total recovery cost and solve the problem within reasonable runtimes. An aircraft recovery model (ARM is proposed herein to formulate the ARP and use feasible line of flights as the basic variables in the model. We define the feasible line of flights (LOFs as a sequence of flights flown by an aircraft within one day. The number of LOFs exponentially grows with the number of flights. Hence, a two-stage heuristic is proposed to reduce the problem scale. The algorithm integrates a heuristic scoring procedure with an aggregated aircraft recovery model (AARM to preselect LOFs. The approach is tested on five real-life test scenarios. The computational results show that the proposed model provides a good formulation of the problem and can be solved within reasonable runtimes with the proposed methodology. The two-stage heuristic significantly reduces the number of LOFs after each stage and finally reduces the number of variables and constraints in the aircraft recovery model.

  16. Lunar Laser Ranging Experiment for Japanese SELENE-2 landing mission

    Science.gov (United States)

    Noda, H.; Kunimori, H.; Araki, H.; Fuse, T.; Hanada, H.; Katayama, M.; Otsubo, T.; Sasaki, S.; Tazawa, S.; Tsuruta, S.; Funazaki, K.; Taniguchi, H.; Murata, K.

    2012-04-01

    We present the development status of the Lunar Laser Ranging experiment proposed to Japanese SELENE-2 lunar landing mission. The Lunar Laser Ranging measures the distance between laser link stations on the Earth and retroreflectors on the Moon, by detecting the time of flight of photons of high-powered laser emitted from the ground station. Since the Earth-Moon distance contains information of lunar orbit, lunar solid tides, and lunar orientation and rotation, we can estimate the inner structure of the Moon through orientation, rotation and tide. Retroreflectors put by the Apollo and Luna missions in 1970's are arrays of many small Corner Cube Prisms (CCP). Because of the tilt of these arrays from the Earth direction due to the optical libration, the returned laser pulse is broaden, causing the main range error of more than 1.5 cm ([1]). Therefore retroreflectors with larger single aperture are necessary for more accurate ranging, and we propose a large single retroreflector of hollow-type with 15 cm aperture. Larger aperture up to 20 cm might be favorable if more mass is permitted for payloads. To cancel the velocity aberration, a large, single aperture retroreflector needs small amount of offset angle between the reflecting planes to spoil the return beam pattern. This angle offset, called Dihedral Angle Offset (DAO) must be optimized to be less than 1 second of arc with 0.1 seconds of arc accuracy to accumulate more photons [2, 3]. The realization of such small DAO is challenging with current technology, therefore the development of fabrication method is important. As for the mirror material, some ceramic products (ZPF: Zero-expansion Pore-free ceramics or SiC: silicon carbide) are under consideration in terms of weight, hardness and handling. The thermal quality of the material can be evaluated by both the thermal conductivity and the coefficient of thermal expansion. The method to fasten three planes each other with precise DAO must be developed.

  17. Orbit Determination of the SELENE Satellites Using Multi-Satellite Data Types and Evaluation of SELENE Gravity Field Models

    Science.gov (United States)

    Goossens, S.; Matsumoto, K.; Noda, H.; Araki, H.; Rowlands, D. D.; Lemoine, F. G.

    2011-01-01

    The SELENE mission, consisting of three separate satellites that use different terrestrial-based tracking systems, presents a unique opportunity to evaluate the contribution of these tracking systems to orbit determination precision. The tracking data consist of four-way Doppler between the main orbiter and one of the two sub-satellites while the former is over the far side, and of same-beam differential VLBI tracking between the two sub-satellites. Laser altimeter data are also used for orbit determination. The contribution to orbit precision of these different data types is investigated through orbit overlap analysis. It is shown that using four-way and VLBI data improves orbit consistency for all satellites involved by reducing peak values in orbit overlap differences that exist when only standard two-way Doppler and range data are used. Including laser altimeter data improves the orbit precision of the SELENE main satellite further, resulting in very smooth total orbit errors at an average level of 18m. The multi-satellite data have also resulted in improved lunar gravity field models, which are assessed through orbit overlap analysis using Lunar Prospector tracking data. Improvements over a pre-SELENE model are shown to be mostly in the along-track and cross-track directions. Orbit overlap differences are at a level between 13 and 21 m with the SELENE models, depending on whether l-day data overlaps or I-day predictions are used.

  18. Preparation of Cu2ZnSnSe4 solar cells by low-temperature co-evaporation and following selenization

    Science.gov (United States)

    Gao, Chao; Schnabel, Thomas; Abzieher, Tobias; Ahlswede, Erik; Powalla, Michael; Hetterich, Michael

    2016-01-01

    Cu2ZnSnSe4 (CZTSe) thin films are prepared by a two-step method which involves co-evaporation of Cu, Zn, Sn, and Se on molybdenum-coated soda-lime glass at low substrate temperature and a following selenization. Solar cells with efficiencies of up to 6.5% can be achieved. The influence of the selenium deposition rates during co-evaporation and the nitrogen pressure during selenization on the properties of the CZTSe films are investigated. It is found that these two parameters can significantly affect the morphology and crystallinity of the CZTSe films. The possible reasons for the experimental results are discussed.

  19. A two-stage scheme for multi-view human pose estimation

    Science.gov (United States)

    Yan, Junchi; Sun, Bing; Liu, Yuncai

    2010-08-01

    We present a two-stage scheme integrating voxel reconstruction and human motion tacking. By combining voxel reconstruction with human motion tracking interactively, our method can work in a cluttered background where perfect foreground silhouettes are hardly available. For each frame, a silhouette-based 3D volume reconstruction method and hierarchical tracking algorithm are applied in two stages. In the first stage, coarse reconstruction and tracking results are obtained, and then the refinement for reconstruction is applied in the second stage. The experimental results demonstrate our approach is promising. Although our method focuses on the problem of human body voxel reconstruction and motion tracking in this paper, our scheme can be used to reconstruct voxel data and infer the pose of many specified rigid and articulated objects.

  20. The Bracka two-stage repair for severe proximal hypospadias: A single center experience

    Directory of Open Access Journals (Sweden)

    Rakesh S Joshi

    2015-01-01

    Full Text Available Background: Surgical correction of severe proximal hypospadias represents a significant surgical challenge and single-stage corrections are often associated with complications and reoperations. Bracka two-stage repair is an attractive alternative surgical procedure with superior, reliable, and reproducible results. Purpose: To study the feasibility and applicability of Bracka two-stage repair for the severe proximal hypospadias and to analyze the outcomes and complications of this surgical technique. Materials and Methods: This prospective study was conducted from January 2011 to December 2013. Bracka two-stage repair was performed using inner preputial skin as a free graft in subjects with proximal hypospadias in whom severe degree of chordee and/or poor urethral plate was present. Only primary cases were included in this study. All subjects received three doses of intra-muscular testosterone 3 weeks apart before first stage. Second stage was performed 6 months after the first stage. Follow-up ranged from 6 months to 24 months. Results: A total of 43 patients operated for Bracka repair, out of which 30 patients completed two-stage repair. Mean age of the patients was 4 years and 8 months. We achieved 100% graft uptake and no revision was required. Three patients developed fistula, while two had metal stenosis. Glans dehiscence, urethral stricture and the residual chordee were not found during follow-up and satisfactory cosmetic results with good urinary stream were achieved in all cases. Conclusion: The Bracka two-stage repair is a safe and reliable approach in select patients in whom it is impractical to maintain the axial integrity of the urethral plate, and, therefore, a full circumference urethral reconstruction become necessary. This gives good results both in terms of restoration of normal function with minimal complication.

  1. Dynamics of the phase formation process upon the low temperature selenization of Cu/In-multilayer stacks

    Science.gov (United States)

    Oertel, M.; Ronning, C.

    2015-03-01

    Phase reactions occurring during a low temperature selenization of thin In/Cu-multilayer stacks were investigated by ex-situ x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS). Therefore, dc-sputtered In/Cu-multilayers onto molybdenum coated soda lime glass were selenized in a high vacuum system at temperatures between 260 and 340 °C with different dwell times and selenium supply. The combination of the results of the phase analysis by XRD and the measurements of the in-depth elemental distribution by EDS allowed a conclusion on the occurring reactions within the layer depth. We found two CuInSe2 formation processes depending on the applied temperature. Already, at a heater temperature of 260 °C, the CuInSe2 formation can occur by the reaction of Cu2-xSe with In4Se3 and Se. At 340 °C, CuInSe2 is formed by the reaction of Cu2-xSe with InSe and Se. Because both reactions need additional selenium, the selenium supply during the selenization can shift the reaction equilibria either to the metal binaries side or to the CuInSe2 side. Interestingly, a lower selenium supply shifts the equilibrium to the CuInSe2 side, because the amount of selenium incorporated into the metallic layer is higher for a lower selenium supply. Most likely, a larger number of grain boundaries are the reason for the stronger selenium incorporation. The results of the phase formation studies were used to design a two stage selenization process to get a defined structure of an indium selenide- and a copper selenide-layer at low temperatures as the origin for a controlled interdiffusion to form the CuInSe2-absorber-layer at higher temperatures. The approach delivers a CuInSe2 absorber which reach total area efficiencies of 11.8% (13.0% active area) in a CuInSe2-thin-film solar cell. A finished formation of CuInSe2 at low temperature was not observed in our experiments but is probably possible for longer dwell times.

  2. Dynamics of the phase formation process upon the low temperature selenization of Cu/In-multilayer stacks

    Energy Technology Data Exchange (ETDEWEB)

    Oertel, M., E-mail: michael.oertel@uni-jena.de; Ronning, C. [Institute of Solid State Physics, Friedrich-Schiller-University Jena, Max-Wien-Platz 1, 07743 Jena (Germany)

    2015-03-14

    Phase reactions occurring during a low temperature selenization of thin In/Cu-multilayer stacks were investigated by ex-situ x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS). Therefore, dc-sputtered In/Cu-multilayers onto molybdenum coated soda lime glass were selenized in a high vacuum system at temperatures between 260 and 340 °C with different dwell times and selenium supply. The combination of the results of the phase analysis by XRD and the measurements of the in-depth elemental distribution by EDS allowed a conclusion on the occurring reactions within the layer depth. We found two CuInSe{sub 2} formation processes depending on the applied temperature. Already, at a heater temperature of 260 °C, the CuInSe{sub 2} formation can occur by the reaction of Cu{sub 2−x}Se with In{sub 4}Se{sub 3} and Se. At 340 °C, CuInSe{sub 2} is formed by the reaction of Cu{sub 2−x}Se with InSe and Se. Because both reactions need additional selenium, the selenium supply during the selenization can shift the reaction equilibria either to the metal binaries side or to the CuInSe{sub 2} side. Interestingly, a lower selenium supply shifts the equilibrium to the CuInSe{sub 2} side, because the amount of selenium incorporated into the metallic layer is higher for a lower selenium supply. Most likely, a larger number of grain boundaries are the reason for the stronger selenium incorporation. The results of the phase formation studies were used to design a two stage selenization process to get a defined structure of an indium selenide- and a copper selenide-layer at low temperatures as the origin for a controlled interdiffusion to form the CuInSe{sub 2}-absorber-layer at higher temperatures. The approach delivers a CuInSe{sub 2} absorber which reach total area efficiencies of 11.8% (13.0% active area) in a CuInSe{sub 2}-thin-film solar cell. A finished formation of CuInSe{sub 2} at low temperature was not observed in our experiments but is probably

  3. Effects of selenite and selenate application on distribution and transformation of selenium fractions in soil and its bioavailability for wheat (Triticum aestivum L.).

    Science.gov (United States)

    Ali, Fayaz; Peng, Qin; Wang, Dan; Cui, Zewei; Huang, Jie; Fu, Dongdong; Liang, Dongli

    2017-03-01

    .33-0.41) decreased compared with that in control (0.55). These differences indicated that selenite and selenate varied in terms of fixation capacities in soil, in transformation and distribution of Se in soil fractions, and in their availability to plants. The results of Michaelis-Menten equation demonstrated the high affinity of leaf to selenate, and the high affinity of roots and grains to selenite. Selenate was dominant in nearly all parts of wheat plants and in each application level. However, the affinity of selenite to wheat grains suggests that selenite is a useful Se fertilizer that must be considered in biofortification programs. In-depth studies at the pot and field scales by using different wheat varieties and application methods of Se in different ecological zones must be conducted to elucidate the mechanism and biochemical properties of Se in soil-plant system and ultimately produce Se-rich staple foods.

  4. The Effect of ATP Sulphurylase on the Prooxidant Properties of Selenate in Yeast Schizosaccharomyces pombe

    Directory of Open Access Journals (Sweden)

    Štefan Fujs

    2009-01-01

    Full Text Available Selenium is an essential microelement in human and animal nutrition, whose intake can be in inorganic (e.g. selenite, selenate or organic form (e.g. selenomethionine. The prooxidant effect of inorganic selenium sources in the animal nutrition has been found as a great disadvantage. Therefore, in this study the effect of the ATP sulphurylase on the prooxidant properties and toxicity of selenate in the fission yeast model organism Schizosaccharomyces pombe has been studied. Two strains of yeast Schizosaccharomyces pombe were used, selenate resistant (SeR ZIM 1889 and selenate sensitive (SeS ZIM 1878 strains, with inactive and active ATP sulphurylase, respectively. During the yeasts’ exposure to selenate growth, intracellular oxidation, cell viability and antioxidative defence systems were determined. Also, activities of antioxidative enzymes (catalase, superoxide dismutases, glutathione peroxidase, glutathione reductase and glucose-6-phosphate dehydrogenase and intracellular content of reduced glutathione were measured. The results show altered enzymatic activities and decreased intracellular content of reduced form of glutathione in the selenate sensitive strain as a consequence of active ATP sulphurylase, which enables selenate reduction leading to oxidative stress. During the selenate reduction, reactive oxygen species (ROS are generated and therefore antioxidative defence systems are induced. In contrast, in the selenate resistant strain with inactive ATP sulphurylase, where selenate reduction does not occur, no induction of antioxidative defence systems was found. Consequently, the active ATP sulphurylase is the key enzyme for the prooxidant properties of selenate and it seems to be the main reason for selenate toxicity and ROS formation during the selenate reduction.

  5. Two-Stage Part-Based Pedestrian Detection

    DEFF Research Database (Denmark)

    Møgelmose, Andreas; Prioletti, Antonio; Trivedi, Mohan M.

    2012-01-01

    Detecting pedestrians is still a challenging task for automotive vision system due the extreme variability of targets, lighting conditions, occlusions, and high speed vehicle motion. A lot of research has been focused on this problem in the last 10 years and detectors based on classifiers has...... gained a special place among the different approaches presented. This work presents a state-of-the-art pedestrian detection system based on a two stages classifier. Candidates are extracted with a Haar cascade classifier trained with the DaimlerDB dataset and then validated through part-based HOG...... of several metrics, such as detection rate, false positives per hour, and frame rate. The novelty of this system rely in the combination of HOG part-based approach, tracking based on specific optimized feature and porting on a real prototype....

  6. Laparoscopic management of a two staged gall bladdertorsion

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Gall bladder torsion (GBT) is a relatively uncommonentity and rarely diagnosed preoperatively. A constantfactor in all occurrences of GBT is a freely mobilegall bladder due to congenital or acquired anomalies.GBT is commonly observed in elderly white females.We report a 77-year-old, Caucasian lady who wasoriginally diagnosed as gall bladder perforation butwas eventually found with a two staged torsion of thegall bladder with twisting of the Riedel's lobe (partof tongue like projection of liver segment 4A). Thistogether, has not been reported in literature, to thebest of our knowledge. We performed laparoscopiccholecystectomy and she had an uneventful postoperativeperiod. GBT may create a diagnostic dilemmain the context of acute cholecystitis. Timely diagnosisand intervention is necessary, with extra care whileoperating as the anatomy is generally distorted. Thefundus first approach can be useful due to alteredanatomy in the region of Calot's triangle. Laparoscopiccholecystectomy has the benefit of early recovery.

  7. Lightweight Concrete Produced Using a Two-Stage Casting Process

    Directory of Open Access Journals (Sweden)

    Jin Young Yoon

    2015-03-01

    Full Text Available The type of lightweight aggregate and its volume fraction in a mix determine the density of lightweight concrete. Minimizing the density obviously requires a higher volume fraction, but this usually causes aggregates segregation in a conventional mixing process. This paper proposes a two-stage casting process to produce a lightweight concrete. This process involves placing lightweight aggregates in a frame and then filling in the remaining interstitial voids with cementitious grout. The casting process results in the lowest density of lightweight concrete, which consequently has low compressive strength. The irregularly shaped aggregates compensate for the weak point in terms of strength while the round-shape aggregates provide a strength of 20 MPa. Therefore, the proposed casting process can be applied for manufacturing non-structural elements and structural composites requiring a very low density and a strength of at most 20 MPa.

  8. The hybrid two stage anticlockwise cycle for ecological energy conversion

    Directory of Open Access Journals (Sweden)

    Cyklis Piotr

    2016-01-01

    Full Text Available The anticlockwise cycle is commonly used for refrigeration, air conditioning and heat pumps applications. The application of refrigerant in the compression cycle is within the temperature limits of the triple point and the critical point. New refrigerants such as 1234yf or 1234ze have many disadvantages, therefore natural refrigerants application is favourable. The carbon dioxide and water can be applied only in the hybrid two stages cycle. The possibilities of this solutions are shown for refrigerating applications, as well some experimental results of the adsorption-compression double stages cycle, powered with solar collectors are shown. As a high temperature cycle the adsorption system is applied. The low temperature cycle is the compression stage with carbon dioxide as a working fluid. This allows to achieve relatively high COP for low temperature cycle and for the whole system.

  9. Two Stage Assessment of Thermal Hazard in An Underground Mine

    Science.gov (United States)

    Drenda, Jan; Sułkowski, Józef; Pach, Grzegorz; Różański, Zenon; Wrona, Paweł

    2016-06-01

    The results of research into the application of selected thermal indices of men's work and climate indices in a two stage assessment of climatic work conditions in underground mines have been presented in this article. The difference between these two kinds of indices was pointed out during the project entitled "The recruiting requirements for miners working in hot underground mine environments". The project was coordinated by The Institute of Mining Technologies at Silesian University of Technology. It was a part of a Polish strategic project: "Improvement of safety in mines" being financed by the National Centre of Research and Development. Climate indices are based only on physical parameters of air and their measurements. Thermal indices include additional factors which are strictly connected with work, e.g. thermal resistance of clothing, kind of work etc. Special emphasis has been put on the following indices - substitute Silesian temperature (TS) which is considered as the climatic index, and the thermal discomfort index (δ) which belongs to the thermal indices group. The possibility of the two stage application of these indices has been taken into consideration (preliminary and detailed estimation). Based on the examples it was proved that by the application of thermal hazard (detailed estimation) it is possible to avoid the use of additional technical solutions which would be necessary to reduce thermal hazard in particular work places according to the climate index. The threshold limit value for TS has been set, based on these results. It was shown that below TS = 24°C it is not necessary to perform detailed estimation.

  10. Selenization of co-sputtered CuInAl precursor films

    Energy Technology Data Exchange (ETDEWEB)

    Dwyer, Daniel; Efstathiadis, Haralabos; Haldar, Pradeep [College of Nanoscale Science and Engineering, University at Albany, State University of New York, 255 Fuller Road, Albany, NY 12203 (United States); Repins, Ingrid [National Renewable Energy Laboratory, Golden, CO 80401 (United States)

    2010-03-15

    CuInAl precursor films with varying Al/(In+Al) ratios were co-sputtered onto Mo coated soda-lime glass substrates. Metal precursor films were then selenized under vacuum conditions using thermally evaporated elemental selenium. Both precursor films and selenized samples were characterized for composition, crystalline phases, morphology, and compositional depth uniformity. Selenized films show low Al incorporation and phase separation when selenized at both 500 and 525 C. Films selenized with a Se deposition rate of 12 Aa/s showed poor adhesion compared with samples selenized at 4 Aa/s. The segregation of aluminum towards the back contact as well as oxygen incorporation appears to cause adhesive loss in extreme cases, and poor interface electrical characteristics in others. The maximum device efficiency measured was 5.2% under AM1.5 for a device with {proportional_to}2 at% aluminum. (author)

  11. Effect of Silica Fume on two-stage Concrete Strength

    Science.gov (United States)

    Abdelgader, H. S.; El-Baden, A. S.

    2015-11-01

    Two-stage concrete (TSC) is an innovative concrete that does not require vibration for placing and compaction. TSC is a simple concept; it is made using the same basic constituents as traditional concrete: cement, coarse aggregate, sand and water as well as mineral and chemical admixtures. As its name suggests, it is produced through a two-stage process. Firstly washed coarse aggregate is placed into the formwork in-situ. Later a specifically designed self compacting grout is introduced into the form from the lowest point under gravity pressure to fill the voids, cementing the aggregate into a monolith. The hardened concrete is dense, homogeneous and has in general improved engineering properties and durability. This paper presents the results from a research work attempt to study the effect of silica fume (SF) and superplasticizers admixtures (SP) on compressive and tensile strength of TSC using various combinations of water to cement ratio (w/c) and cement to sand ratio (c/s). Thirty six concrete mixes with different grout constituents were tested. From each mix twenty four standard cylinder samples of size (150mm×300mm) of concrete containing crushed aggregate were produced. The tested samples were made from combinations of w/c equal to: 0.45, 0.55 and 0.85, and three c/s of values: 0.5, 1 and 1.5. Silica fume was added at a dosage of 6% of weight of cement, while superplasticizer was added at a dosage of 2% of cement weight. Results indicated that both tensile and compressive strength of TSC can be statistically derived as a function of w/c and c/s with good correlation coefficients. The basic principle of traditional concrete, which says that an increase in water/cement ratio will lead to a reduction in compressive strength, was shown to hold true for TSC specimens tested. Using a combination of both silica fume and superplasticisers caused a significant increase in strength relative to control mixes.

  12. HRI catalytic two-stage liquefaction (CTSL) process materials: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.W.; Later, D.W.

    1985-12-01

    This report presents data from the chemical analysis and biological testing of coal liquefaction materials obtained from the Hydrocarbon Research, Incorporated (HRI) catalytic two-stage liquefaction (CTSL) process. Materials from both an experimental run and a 25-day demonstration run were analyzed. Chemical methods of analysis included adsorption column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, low-voltage probe-inlet mass spectrometry, and proton nuclear magnetic resonance spectroscopy. The biological activity was evaluated using the standard microbial mutagenicity assay and an initiation/promotion assay for mouse-skin tumorigenicity. Where applicable, the results obtained from the analyses of the CTSL materials have been compared to those obtained from the integrated and nonintegrated two-stage coal liquefaction processes. 18 refs., 26 figs., 22 tabs.

  13. HRI catalytic two-stage liquefaction (CTSL) process materials: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.W.; Later, D.W.

    1985-12-01

    This report presents data from the chemical analysis and biological testing of coal liquefaction materials obtained from the Hydrocarbon Research, Incorporated (HRI) catalytic two-stage liquefaction (CTSL) process. Materials from both an experimental run and a 25-day demonstration run were analyzed. Chemical methods of analysis included adsorption column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, low-voltage probe-inlet mass spectrometry, and proton nuclear magnetic resonance spectroscopy. The biological activity was evaluated using the standard microbial mutagenicity assay and an initiation/promotion assay for mouse-skin tumorigenicity. Where applicable, the results obtained from the analyses of the CTSL materials have been compared to those obtained from the integrated and nonintegrated two-stage coal liquefaction processes. 18 refs., 26 figs., 22 tabs.

  14. Effects of earthworm casts and zeolite on the two-stage composting of green waste

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Lu, E-mail: zhanglu1211@gmail.com; Sun, Xiangyang, E-mail: xysunbjfu@gmail.com

    2015-05-15

    Highlights: • Earthworm casts (EWCs) and clinoptilolite (CL) were used in green waste composting. • Addition of EWCs + CL improved physico-chemical and microbiological properties. • Addition of EWCs + CL extended the duration of thermophilic periods during composting. • Addition of EWCs + CL enhanced humification, cellulose degradation, and nutrients. • Combined addition of 0.30% EWCs + 25% CL reduced composting time to 21 days. - Abstract: Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21 days with the optimized two-stage composting method rather than in the 90–270 days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL.

  15. Characterization of component interactions in two-stage axial turbine

    Directory of Open Access Journals (Sweden)

    Adel Ghenaiet

    2016-08-01

    Full Text Available This study concerns the characterization of both the steady and unsteady flows and the analysis of stator/rotor interactions of a two-stage axial turbine. The predicted aerodynamic performances show noticeable differences when simulating the turbine stages simultaneously or separately. By considering the multi-blade per row and the scaling technique, the Computational fluid dynamics (CFD produced better results concerning the effect of pitchwise positions between vanes and blades. The recorded pressure fluctuations exhibit a high unsteadiness characterized by a space–time periodicity described by a double Fourier decomposition. The Fast Fourier Transform FFT analysis of the static pressure fluctuations recorded at different interfaces reveals the existence of principal harmonics and their multiples, and each lobed structure of pressure wave corresponds to the number of vane/blade count. The potential effect is seen to propagate both upstream and downstream of each blade row and becomes accentuated at low mass flow rates. Between vanes and blades, the potential effect is seen to dominate the quasi totality of blade span, while downstream the blades this effect seems to dominate from hub to mid span. Near the shroud the prevailing effect is rather linked to the blade tip flow structure.

  16. A continuous two stage solar coal gasification system

    Science.gov (United States)

    Mathur, V. K.; Breault, R. W.; Lakshmanan, S.; Manasse, F. K.; Venkataramanan, V.

    The characteristics of a two-stage fluidized-bed hybrid coal gasification system to produce syngas from coal, lignite, and peat are described. Devolatilization heat of 823 K is supplied by recirculating gas heated by a solar receiver/coal heater. A second-stage gasifier maintained at 1227 K serves to crack remaining tar and light oil to yield a product free from tar and other condensables, and sulfur can be removed by hot clean-up processes. CO is minimized because the coal is not burned with oxygen, and the product gas contains 50% H2. Bench scale reactors consist of a stage I unit 0.1 m in diam which is fed coal 200 microns in size. A stage II reactor has an inner diam of 0.36 m and serves to gasify the char from stage I. A solar power source of 10 kWt is required for the bench model, and will be obtained from a central receiver with quartz or heat pipe configurations for heat transfer.

  17. Characterization of component interactions in two-stage axial turbine

    Institute of Scientific and Technical Information of China (English)

    Adel Ghenaiet; Kaddour Touil

    2016-01-01

    This study concerns the characterization of both the steady and unsteady flows and the analysis of stator/rotor interactions of a two-stage axial turbine. The predicted aerodynamic perfor-mances show noticeable differences when simulating the turbine stages simultaneously or sepa-rately. By considering the multi-blade per row and the scaling technique, the Computational fluid dynamics (CFD) produced better results concerning the effect of pitchwise positions between vanes and blades. The recorded pressure fluctuations exhibit a high unsteadiness characterized by a space–time periodicity described by a double Fourier decomposition. The Fast Fourier Transform FFT analysis of the static pressure fluctuations recorded at different interfaces reveals the existence of principal harmonics and their multiples, and each lobed structure of pressure wave corresponds to the number of vane/blade count. The potential effect is seen to propagate both upstream and downstream of each blade row and becomes accentuated at low mass flow rates. Between vanes and blades, the potential effect is seen to dominate the quasi totality of blade span, while down-stream the blades this effect seems to dominate from hub to mid span. Near the shroud the prevail-ing effect is rather linked to the blade tip flow structure.

  18. Two stages kinetics of municipal solid waste inoculation composting processes

    Institute of Scientific and Technical Information of China (English)

    XI Bei-dou1; HUANG Guo-he; QIN Xiao-sheng; LIU Hong-liang

    2004-01-01

    In order to understand the key mechanisms of the composting processes, the municipal solid waste(MSW) composting processes were divided into two stages, and the characteristics of typical experimental scenarios from the viewpoint of microbial kinetics was analyzed. Through experimentation with advanced composting reactor under controlled composting conditions, several equations were worked out to simulate the degradation rate of the substrate. The equations showed that the degradation rate was controlled by concentration of microbes in the first stage. The degradation rates of substrates of inoculation Run A, B, C and Control composting systems were 13.61 g/(kg·h), 13.08 g/(kg·h), 15.671 g/(kg·h), and 10.5 g/(kg·h), respectively. The value of Run C is around 1.5 times higher than that of Control system. The decomposition rate of the second stage is controlled by concentration of substrate. Although the organic matter decomposition rates were similar to all Runs, inoculation could reduce the values of the half velocity coefficient and could be more efficient to make the composting stable. Particularly. For Run C, the decomposition rate is high in the first stage, and is low in the second stage. The results indicated that the inoculation was efficient for the composting processes.

  19. Gas loading system for LANL two-stage gas guns

    Science.gov (United States)

    Gibson, Lee; Bartram, Brian; Dattelbaum, Dana; Lang, John; Morris, John

    2015-06-01

    A novel gas loading system was designed for the specific application of remotely loading high purity gases into targets for gas-gun driven plate impact experiments. The high purity gases are loaded into well-defined target configurations to obtain Hugoniot states in the gas phase at greater than ambient pressures. The small volume of the gas samples is challenging, as slight changing in the ambient temperature result in measurable pressure changes. Therefore, the ability to load a gas gun target and continually monitor the sample pressure prior to firing provides the most stable and reliable target fielding approach. We present the design and evaluation of a gas loading system built for the LANL 50 mm bore two-stage light gas gun. Targets for the gun are made of 6061 Al or OFHC Cu, and assembled to form a gas containment cell with a volume of approximately 1.38 cc. The compatibility of materials was a major consideration in the design of the system, particularly for its use with corrosive gases. Piping and valves are stainless steel with wetted seals made from Kalrez and Teflon. Preliminary testing was completed to ensure proper flow rate and that the proper safety controls were in place. The system has been used to successfully load Ar, Kr, Xe, and anhydrous ammonia with purities of up to 99.999 percent. The design of the system, and example data from the plate impact experiments will be shown. LA-UR-15-20521

  20. Opredeluvawe selen vo pomosni lekoviti sredstva so primena na AAS

    Directory of Open Access Journals (Sweden)

    Rumenka Petkovska

    2003-08-01

    Full Text Available Opredeluvanjeto selen vo pomosni lekoviti sredstva bese izvrseno so atomska apsorpciona spektrometrija so primena na grafitna pecka i hidriden sistem.Podgotovkata na primerocite bese napravena so mikrobranovo razoruvanje. Za grafitna tehnika e koristena smesa od modifikatori sto sodrzi rastvori na Pd(NO32 so masena koncentracija 1,5 g/l i Mg(NO32 so masena koncentracija 1g/l vo rastvor na HNO3 so koncentracija 2,3 mol/l. Za hidridniot sistem koristen e rastvor na NaBH4 so masen udel 1,5% vo rastvor od NaOH so masen udel 0,5%. Metodot be{e validiran preku opredeluvawe: linearnost (vo koncentraciono podracje od 15 do 75 µg/l za grafitna tehnika i 5 do 25 µg/l za hidriden sistem, tocnost, preciznost, limit na detekcija (4 µg/l za grafitna tehnika i 1 µg/l za hidriden sistem i kvantifikacija (13 µg/l za grafitna tehnika i 3 µg/l za hidriden sistem. Metodot bese primenet za opredeluvanje selen vo tri preparati vo koi selenot e vo kombinacija so: cink, bakar i vitaminite A, S i E. Dobienite rezultati pokazuvaat deka predlozenite metodi za opredeluvanje selen vo farmacevtski preparati se osetlivi, precizni, tocni i reproducibilni

  1. Inhibition of synthesis of heparan sulfate by selenate: Possible dependence on sulfation for chain polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Dietrich, C.P.; Nader, H.B. (Paulist School of Medicine, Sao Paulo (Brazil)); Buonassisi, V.; Colburn, P. (W. Alton Jones Cell Science Center, Lake Placid, NY (USA))

    1988-01-01

    Selenate, a sulfation inhibitor, blocks the synthesis of heparan sulfate and chondroitin sulfate by cultured endothelial cells. In contrast, selenate does not affect the production of hyaluronic acid, a nonsulfated glycosaminoglycan. No differences in molecular weight, ({sup 3}H)glucosamine/({sup 35}S)sulfuric acid ratios, or disaccharide composition were observed when the heparan sulfate synthesized by selenate-treated cells was compared with that of control cells. The absence of undersulfated chains in preparations from cultures exposed to selenate supports the concept that, in the intact cell, the polymerization of heparan sulfate might be dependent on the sulfation of the saccharide units added to the growing glycosaminoglycan chain.

  2. Performance analysis of RDF gasification in a two stage fluidized bed-plasma process.

    Science.gov (United States)

    Materazzi, M; Lettieri, P; Taylor, R; Chapman, C

    2016-01-01

    The major technical problems faced by stand-alone fluidized bed gasifiers (FBG) for waste-to gas applications are intrinsically related to the composition and physical properties of waste materials, such as RDF. The high quantity of ash and volatile material in RDF can provide a decrease in thermal output, create high ash clinkering, and increase emission of tars and CO2, thus affecting the operability for clean syngas generation at industrial scale. By contrast, a two-stage process which separates primary gasification and selective tar and ash conversion would be inherently more forgiving and stable. This can be achieved with the use of a separate plasma converter, which has been successfully used in conjunction with conventional thermal treatment units, for the ability to 'polish' the producer gas by organic contaminants and collect the inorganic fraction in a molten (and inert) state. This research focused on the performance analysis of a two-stage fluid bed gasification-plasma process to transform solid waste into clean syngas. Thermodynamic assessment using the two-stage equilibrium method was carried out to determine optimum conditions for the gasification of RDF and to understand the limitations and influence of the second stage on the process performance (gas heating value, cold gas efficiency, carbon conversion efficiency), along with other parameters. Comparison with a different thermal refining stage, i.e. thermal cracking (via partial oxidation) was also performed. The analysis is supported by experimental data from a pilot plant.

  3. Rehabilitation outcomes in patients with early and two-stage reconstruction of flexor tendon injuries.

    Science.gov (United States)

    Sade, Ilgin; İnanir, Murat; Şen, Suzan; Çakmak, Esra; Kablanoğlu, Serkan; Selçuk, Barin; Dursun, Nigar

    2016-08-01

    [Purpose] The primary aim of this study was to assess rehabilitation outcomes for early and two-stage repair of hand flexor tendon injuries. The secondary purpose of this study was to compare the findings between treatment groups. [Subjects and Methods] Twenty-three patients were included in this study. Early repair (n=14) and two-stage repair (n=9) groups were included in a rehabilitation program that used hand splints. This retrospective evaluated patients according to their demographic characteristics, including age, gender, injured hand, dominant hand, cause of injury, zone of injury, number of affected fingers, and accompanying injuries. Pain, range of motion, and grip strength were evaluated using a visual analog scale, goniometer, and dynamometer, respectively. [Results] Both groups showed significant improvements in pain and finger flexion after treatment compared with baseline measurements. However, no significant differences were observed between the two treatment groups. Similar results were obtained for grip strength and pinch grip, whereas gross grip was better in the early tendon repair group. [Conclusion] Early and two-stage reconstruction of patients with flexor tendon injuries can be performed with similarly favorable responses and effective rehabilitation programs.

  4. A Comparison of Direct and Two-Stage Transportation of Patients to Hospital in Poland

    Directory of Open Access Journals (Sweden)

    Anna Rosiek

    2015-04-01

    Full Text Available Background: The rapid international expansion of telemedicine reflects the growth of technological innovations. This technological advancement is transforming the way in which patients can receive health care. Materials and Methods: The study was conducted in Poland, at the Department of Cardiology of the Regional Hospital of Louis Rydygier in Torun. The researchers analyzed the delay in the treatment of patients with acute coronary syndrome. The study was conducted as a survey and examined 67 consecutively admitted patients treated invasively in a two-stage transport system. Data were analyzed statistically. Results: Two-stage transportation does not meet the timeframe guidelines for the treatment of patients with acute myocardial infarction. Intervals for the analyzed group of patients were statistically significant (p < 0.0001. Conclusions: Direct transportation of the patient to a reference center with interventional cardiology laboratory has a significant impact on reducing in-hospital delay in case of patients with acute coronary syndrome. Perspectives: This article presents the results of two-stage transportation of the patient with acute coronary syndrome. This measure could help clinicians who seek to assess time needed for intervention. It also shows how time from the beginning of pain in chest is important and may contribute to patient disability, death or well-being.

  5. Two-stage residual inclusion estimation: addressing endogeneity in health econometric modeling.

    Science.gov (United States)

    Terza, Joseph V; Basu, Anirban; Rathouz, Paul J

    2008-05-01

    The paper focuses on two estimation methods that have been widely used to address endogeneity in empirical research in health economics and health services research-two-stage predictor substitution (2SPS) and two-stage residual inclusion (2SRI). 2SPS is the rote extension (to nonlinear models) of the popular linear two-stage least squares estimator. The 2SRI estimator is similar except that in the second-stage regression, the endogenous variables are not replaced by first-stage predictors. Instead, first-stage residuals are included as additional regressors. In a generic parametric framework, we show that 2SRI is consistent and 2SPS is not. Results from a simulation study and an illustrative example also recommend against 2SPS and favor 2SRI. Our findings are important given that there are many prominent examples of the application of inconsistent 2SPS in the recent literature. This study can be used as a guide by future researchers in health economics who are confronted with endogeneity in their empirical work.

  6. Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Changhao Piao

    2014-01-01

    Full Text Available The fast response, high efficiency, and good reliability are very important characteristics to electric vehicles (EVs dc/dc converters. Two-stage dc-dc converter is a kind of dc-dc topologies that can offer those characteristics to EVs. Presently, nonlinear control is an active area of research in the field of the control algorithm of dc-dc converters. However, very few papers research on two-stage converter for EVs. In this paper, a fixed switching frequency sliding mode (FSFSM controller and double-integral sliding mode (DISM controller for two-stage dc-dc converter are proposed. And a conventional linear control (lag is chosen as the comparison. The performances of the proposed FSFSM controller are compared with those obtained by the lag controller. In consequence, the satisfactory simulation and experiment results show that the FSFSM controller is capable of offering good large-signal operations with fast dynamical responses to the converter. At last, some other simulation results are presented to prove that the DISM controller is a promising method for the converter to eliminate the steady-state error.

  7. Two-staged management for all types of congenital pouch colon

    Directory of Open Access Journals (Sweden)

    Rajendra K Ghritlaharey

    2013-01-01

    Full Text Available Background: The aim of this study was to review our experience with two-staged management for all types of congenital pouch colon (CPC. Patients and Methods: This retrospective study included CPC cases that were managed with two-staged procedures in the Department of Paediatric Surgery, over a period of 12 years from 1 January 2000 to 31 December 2011. Results: CPC comprised of 13.71% (97 of 707 of all anorectal malformations (ARM and 28.19% (97 of 344 of high ARM. Eleven CPC cases (all males were managed with two-staged procedures. Distribution of cases (Narsimha Rao et al.′s classification into types I, II, III, and IV were 1, 2, 6, and 2, respectively. Initial operative procedures performed were window colostomy (n = 6, colostomy proximal to pouch (n = 4, and ligation of colovesical fistula and end colostomy (n = 1. As definitive procedures, pouch excision with abdomino-perineal pull through (APPT of colon in eight, and pouch excision with APPT of ileum in three were performed. The mean age at the time of definitive procedures was 15.6 months (ranges from 3 to 53 months and the mean weight was 7.5 kg (ranges from 4 to 11 kg. Good fecal continence was observed in six and fair in two cases in follow-up periods, while three of our cases lost to follow up. There was no mortality following definitive procedures amongst above 11 cases. Conclusions: Two-staged procedures for all types of CPC can also be performed safely with good results. The most important fact that the definitive procedure is being done without protective stoma and therefore, it avoids stoma closure, stoma-related complications, related cost of stoma closure and hospital stay.

  8. Selenate enhances STAT3 transcriptional activity in endothelial cells: differential actions of selenate and selenite on LIF cytokine signaling and cell viability.

    Science.gov (United States)

    Alturkmani, Hani J; Zgheib, Carlos; Zouein, Fouad A; Alshaaer, Nour Eddin F; Kurdi, Mazen; Booz, George W

    2012-04-01

    Sodium selenate may have utility in treating Alzheimer's disease and diabetes; however, its impact on the associated proinflammatory cytokine signaling of endothelial cells has not been investigated. We report that treatment of human microvascular endothelial cells with sodium selenate at a pharmacological dose (100 μM) enhanced tyrosine phosphorylation of nuclear STAT3 on Y705 in response to IL-6-type cytokine, leukemia inhibitory factor (LIF), indicative of enhanced STAT3 activity. Accordingly, STAT3 nuclear binding to DNA was increased, as well as LIF-induced gene expression of chemokine (C-C motif) ligand 2 (CCL2). CCL2 plays a key role in inflammatory processes associated with neuronal degenerative and vascular diseases. The enhancing action of selenate on LIF-induced STAT3 Y705 phosphorylation was replicated by vanadate and a specific inhibitor of protein tyrosine phosphatase, non-receptor type 1 (PTP1B). Moreover, we observed that selenite, the cellular reduction bioproduct of selenate but not selenate itself, inhibited enzymatic activity of human recombinant PTP1B. Our findings support the conclusion that in human microvascular endothelial cells selenate has a vanadate-like effect in inhibiting PTP1B and enhancing proinflammatory STAT3 activation. These findings raise the possibility that beneficial actions of supranutritional levels of selenate for treating Alzheimer's and diabetes may be offset by a proinflammatory action on endothelial cells.

  9. PERFORMANCE STUDY OF A TWO STAGE SOLAR ADSORPTION REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    BAIJU. V

    2011-07-01

    Full Text Available The present study deals with the performance of a two stage solar adsorption refrigeration system with activated carbon-methanol pair investigated experimentally. Such a system was fabricated and tested under the conditions of National Institute of Technology Calicut, Kerala, India. The system consists of a parabolic solar concentrator,two water tanks, two adsorbent beds, condenser, expansion device, evaporator and accumulator. In this particular system the second water tank is act as a sensible heat storage device so that the system can be used during night time also. The system has been designed for heating 50 litres of water from 25oC to 90oC as well ascooling 10 litres of water from 30oC to 10oC within one hour. The performance parameters such as specific cooling power (SCP, coefficient of performance, solar COP and exergetic efficiency are studied. The dependency between the exergetic efficiency and cycle COP with the driving heat source temperature is also studied. The optimum heat source temperature for this system is determined as 72.4oC. The results show that the system has better performance during night time as compared to the day time. The system has a mean cycle COP of 0.196 during day time and 0.335 for night time. The mean SCP values during day time and night time are 47.83 and 68.2, respectively. The experimental results also demonstrate that the refrigerator has cooling capacity of 47 to 78 W during day time and 57.6 W to 104.4W during night time.

  10. Photocatalytic removal of selenite and selenate species: effect of EDTA and other process variables.

    Science.gov (United States)

    Labaran, B A; Vohra, M S

    2014-01-01

    TiO2-assisted photocatalysis was employed for the removal of aqueous phase selenite and selenate species in conjunction with EDTA as a hole (h+) scavenger. Findings from the binary selenite/EDTA and selenate/EDTA systems showed high selenite and selenate removal at pH 4 and pH 6, with faster removal kinetics noted for the selenite species compared with the selenate species that showed a gradual change over the reaction course. The noted removal of selenite and selenate was attributed to their reduction by the conduction band electrons (e-). The effect of pH studies indicated high selenite, selenate, and EDTA removal in the acidic pH range, with the following specific trend: pH 4 > pH 6 > pH 12. Different from the EDTA studies, the use of thiocyanate alone did not initiate reduction of selenium oxyanions, and hence, its role as a hole scavenger in the present systems was not evident. However, the addition of EDTA to respective selenite/selenate/thiocyanate system at pH 4 did yield near complete removal of selenite and selenate species. The marginal role of thiocyanate as a hole scavenger was attributed to its negligible adsorption onto TiO2 surface. Furthermore, at pH 4 and within 3 h reaction time, enhanced selenate removal was noted with an increase in its initial concentration from 20 to 100 ppm, with near complete selenate removal noted for both cases. In general, findings from the present work indicate that both selenite and selenate can be successfully removed from the aqueous phase employing the TiO2-mediated photocatalysis and h(+)-scavenging agent EDTA.

  11. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

    OpenAIRE

    Ladan Jamshidy; Hamid Reza Mozaffari; Payam Faraji; Roohollah Sharifi

    2016-01-01

    Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with ...

  12. Right Axillary Sweating After Left Thoracoscopic Sypathectomy in Two-Stage Surgery

    Directory of Open Access Journals (Sweden)

    Berkant Ozpolat

    2013-06-01

    Full Text Available One stage bilateral or two stage unilateral video assisted thoracoscopic sympathectomy could be performed in the treatment of primary focal hyperhidrosis. Here we present a case with compensatory sweating of contralateral side after a two stage operation.

  13. The Two-stage Constrained Equal Awards and Losses Rules for Multi-Issue Allocation Situation

    NARCIS (Netherlands)

    Lorenzo-Freire, S.; Casas-Mendez, B.; Hendrickx, R.L.P.

    2005-01-01

    This paper considers two-stage solutions for multi-issue allocation situations.Characterisations are provided for the two-stage constrained equal awards and constrained equal losses rules, based on the properties of composition and path independence.

  14. Selenium uptake, translocation and speciation in wheat supplied with selenate or selenite.

    Science.gov (United States)

    Li, Hua-Fen; McGrath, Steve P; Zhao, Fang-Jie

    2008-01-01

    Selenite can be a dominant form of selenium (Se) in aerobic soils; however, unlike selenate, the mechanism of selenite uptake by plants remains unclear. Uptake, translocation and Se speciation in wheat (Triticum aestivum) supplied with selenate or selenite, or both, were investigated in hydroponic experiments. The kinetics of selenite influx was determined in short-term (30 min) experiments. Selenium speciation in the water-extractable fraction of roots and shoots was determined by HPLC-ICPMS. Plants absorbed similar amounts of Se within 1 d when supplied with selenite or selenate. Selenate and selenite uptake were enhanced in sulphur-starved and phosphorus-starved plants, respectively. Phosphate markedly increased K(m) of the selenite influx. Selenate and selenite uptake were both metabolically dependent. Selenite was rapidly converted to organic forms in roots, with limited translocation to shoots. Selenomethionine, selenomethionine Se-oxide, Se-methyl-selenocysteine and several other unidentified Se species were detected in the root extracts and xylem sap from selenite-treated plants. Selenate was highly mobile in xylem transport, but little was assimilated to organic forms in 1 d. The presence of selenite decreased selenate uptake and xylem transport. Selenite uptake is an active process likely mediated, at least partly, by phosphate transporters. Selenite and selenate differ greatly in the ease of assimilation and xylem transport.

  15. Modeling selenate adsorption behavior on oxides, clay minerals, and soils using the triple layer model

    Science.gov (United States)

    Selenate adsorption behavior was investigated on amorphous aluminum oxide, amorphous iron oxide, goethite, clay minerals: kaolinites, montmorillonites, illite, and 18 soil samples from Hawaii, and the Southwestern and the Midwestern regions of the US as a function of solution pH. Selenate adsorpti...

  16. Considerations Regarding Age at Surgery and Fistula Incidence Using One- and Two-stage Closure for Cleft Palate

    Directory of Open Access Journals (Sweden)

    Simona Stoicescu

    2013-12-01

    Full Text Available Introduction: Although cleft lip and palate (CLP is one of the most common congenital malformations, occurring in 1 in 700 live births, there is still no generally accepted treatment protocol. Numerous surgical techniques have been described for cleft palate repair; these techniques can be divided into one-stage (one operation cleft palate repair and two-stage cleft palate closure. The aim of this study is to present our cleft palate team experience in using the two-stage cleft palate closure and the clinical outcomes in terms of oronasal fistula rate. Material and methods: A retrospective analysis was performed on medical records of 80 patients who underwent palate repair over a five-year period, from 2008 to 2012. All cleft palate patients were incorporated. Information on patient’s gender, cleft type, age at repair, one- or two-stage cleft palate repair were collected and analyzed. Results: Fifty-three (66% and twenty-seven (34% patients underwent two-stage and one-stage repair, respectively. According to Veau classification, more than 60% of them were Veau III and IV, associating cleft lip to cleft palate. Fistula occurred in 34% of the two-stage repairs versus 7% of one-stage repairs, with an overall incidence of 24%. Conclusions: Our study has shown that a two-stage cleft palate closure has a higher rate of fistula formation when compared with the one-stage repair. Two-stage repair is the protocol of choice in wide complete cleft lip and palate cases, while one-stage procedure is a good option for cleft palate alone, or some specific cleft lip and palate cases (narrow cleft palate, older age at surgery

  17. Two-Stage Exams Improve Student Learning in an Introductory Geology Course: Logistics, Attendance, and Grades

    Science.gov (United States)

    Knierim, Katherine; Turner, Henry; Davis, Ralph K.

    2015-01-01

    Two-stage exams--where students complete part one of an exam closed book and independently and part two is completed open book and independently (two-stage independent, or TS-I) or collaboratively (two-stage collaborative, or TS-C)--provide a means to include collaborative learning in summative assessments. Collaborative learning has been shown to…

  18. Two stage DOA and Fundamental Frequency Estimation based on Subspace Techniques

    DEFF Research Database (Denmark)

    Zhou, Zhenhua; Christensen, Mads Græsbøll; So, Hing-Cheung

    2012-01-01

    optimally weighted harmonic multiple signal classification (MCOW-HMUSIC) estimator is devised for the estimation of fundamental frequencies. Secondly, the spatio- temporal multiple signal classification (ST-MUSIC) estimator is proposed for the estimation of DOA with the estimated frequencies. Statistical......In this paper, the problem of fundamental frequency and direction-of-arrival (DOA) estimation for multi-channel harmonic sinusoidal signal is addressed. The estimation procedure consists of two stages. Firstly, by making use of the subspace technique and Markov-based eigenanalysis, a multi- channel...... evaluation with synthetic signals shows the high accuracy of the proposed methods compared with their non-weighting versions....

  19. Selenate Enhances STAT3 Transcriptional Activity in Endothelial Cells: Differential Actions of Selenate and Selenite on LIF Cytokine Signaling and Cell Viability

    OpenAIRE

    Alturkmani, Hani J; Zgheib, Carlos; Zouein, Fouad A.; Alshaaer, Nour Eddin F.; Kurdi, Mazen; Booz, George W.

    2012-01-01

    Sodium selenate may have utility in treating Alzheimer’s disease and diabetes; however, its impact on the associated proinflammatory cytokine signaling of endothelial cells has not been investigated. We report that treatment of human microvascular endothelial cells with sodium selenate at a pharmacological dose (100 μM) enhanced tyrosine phosphorylation of nuclear STAT3 on Y705 in response to IL-6-type cytokine, leukemia inhibitory factor (LIF), indicative of enhanced STAT3 activity. Accordin...

  20. Development and optimization of a two-stage gasifier for heat and power production

    Science.gov (United States)

    Kosov, V. V.; Zaichenko, V. M.

    2016-11-01

    The major methods of biomass thermal conversion are combustion in excess oxygen, gasification in reduced oxygen, and pyrolysis in the absence of oxygen. The end products of these methods are heat, gas, liquid and solid fuels. From the point of view of energy production, none of these methods can be considered optimal. A two-stage thermal conversion of biomass based on pyrolysis as the first stage and pyrolysis products cracking as the second stage can be considered the optimal method for energy production that allows obtaining synthesis gas consisting of hydrogen and carbon monoxide and not containing liquid or solid particles. On the base of the two stage cracking technology, there was designed an experimental power plant of electric power up to 50 kW. The power plant consists of a thermal conversion module and a gas engine power generator adapted for operation on syngas. Purposes of the work were determination of an optimal operation temperature of the thermal conversion module and an optimal mass ratio of processed biomass and charcoal in cracking chamber of the thermal conversion module. Experiments on the pyrolysis products cracking at various temperatures show that the optimum cracking temperature is equal to 1000 °C. From the results of measuring the volume of gas produced in different mass ratios of charcoal and wood biomass processed, it follows that the maximum volume of the gas in the range of the mass ratio equal to 0.5-0.6.

  1. Planning an Agricultural Water Resources Management System: A Two-Stage Stochastic Fractional Programming Model

    Directory of Open Access Journals (Sweden)

    Liang Cui

    2015-07-01

    Full Text Available Irrigation water management is crucial for agricultural production and livelihood security in many regions and countries throughout the world. In this study, a two-stage stochastic fractional programming (TSFP method is developed for planning an agricultural water resources management system under uncertainty. TSFP can provide an effective linkage between conflicting economic benefits and the associated penalties; it can also balance conflicting objectives and maximize the system marginal benefit with per unit of input under uncertainty. The developed TSFP method is applied to a real case of agricultural water resources management of the Zhangweinan River Basin China, which is one of the main food and cotton producing regions in north China and faces serious water shortage. The results demonstrate that the TSFP model is advantageous in balancing conflicting objectives and reflecting complicated relationships among multiple system factors. Results also indicate that, under the optimized irrigation target, the optimized water allocation rate of Minyou Channel and Zhangnan Channel are 57.3% and 42.7%, respectively, which adapts the changes in the actual agricultural water resources management problem. Compared with the inexact two-stage water management (ITSP method, TSFP could more effectively address the sustainable water management problem, provide more information regarding tradeoffs between multiple input factors and system benefits, and help the water managers maintain sustainable water resources development of the Zhangweinan River Basin.

  2. Vibrational spectroscopic and crystallographic study of the novel guanylurea salts with sulphuric and selenic acids

    Science.gov (United States)

    Matulková, I.; Fridrichová, M.; Císařová, I.; Vaněk, P.; Uhlík, F.; Němec, I.

    2017-03-01

    The family of known guanylurea(1+) sulphates was extended for two novel triclinic (space group P-1) members - bis(guanylurea(1+)) sulphate dihydrate and tetrakis(guanylurea(1+)) bis(hydrogen sulphate) sulphate. Additionally, the monoclinic (space group P21/n) guanylurea(1+) hydrogen selenate was also isolated and characterised. Besides of X-ray diffraction study these novel guanylurea chalcogenates were studied by the methods of vibrational spectroscopy. The study of thermal behaviour of the prepared salts revealed reversible λ-shaped anomaly for tetrakis(guanylurea(1+)) bis(hydrogen sulphate) sulphate at 354 K. This effect was studied in detail by the combination of DSC and temperature-dependent IR and Raman spectroscopies.

  3. Lossless and near-lossless digital angiography coding using a two-stage motion compensation approach.

    Science.gov (United States)

    dos Santos, Rafael A P; Scharcanski, Jacob

    2008-07-01

    This paper presents a two-stage motion compensation coding scheme for image sequences in hemodynamics. The first stage of the proposed method implements motion compensation, and the second stage corrects local pixel intensity distortions with a context adaptive linear predictor. The proposed method is robust to the local intensity distortions and the noise that often degrades these image sequences, providing lossless and near-lossless quality. Our experiments with lossless compression of 12bits/pixel studies indicate that, potentially, our approach can perform 3.8%, 2% and 1.6% better than JPEG-2000, JPEG-LS and the method proposed by Scharcanski [1], respectively. The performance tends to improve for near-lossless compression. Therefore, this work presents experimental evidence that for coding image sequences in hemodynamics, an adequate motion compensation scheme can be more efficient than the still-image coding methods often used nowadays.

  4. On bi-criteria two-stage transportation problem: a case study

    Directory of Open Access Journals (Sweden)

    Ahmad MURAD

    2010-01-01

    Full Text Available The study of the optimum distribution of goods between sources and destinations is one of the important topics in projects economics. This importance comes as a result of minimizing the transportation cost, deterioration, time, etc. The classical transportation problem constitutes one of the major areas of application for linear programming. The aim of this problem is to obtain the optimum distribution of goods from different sources to different destinations which minimizes the total transportation cost. From the practical point of view, the transportation problems may differ from the classical form. It may contain one or more objective function, one or more stage to transport, one or more type of commodity with one or more means of transport. The aim of this paper is to construct an optimization model for transportation problem for one of mill-stones companies. The model is formulated as a bi-criteria two-stage transportation problem with a special structure depending on the capacities of suppliers, warehouses and requirements of the destinations. A solution algorithm is introduced to solve this class of bi-criteria two-stage transportation problem to obtain the set of non-dominated extreme points and the efficient solutions accompanied with each one that enables the decision maker to choose the best one. The solution algorithm mainly based on the fruitful application of the methods for treating transportation problems, theory of duality of linear programming and the methods of solving bi-criteria linear programming problems.

  5. Two-stage image segmentation based on edge and region information

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A two-stage method for image segmentation based on edge and region information is proposed. Different deformation schemes are used at two stages for segmenting the object correctly in image plane. At the first stage, the contour of the model is divided into several segments hierarchically that deform respectively using affine transformation. After the contour is deformed to the approximate boundary of object, a fine match mechanism using statistical information of local region to redefine the external energy of the model is used to make the contour fit the object's boundary exactly. The algorithm is effective, as the hierarchical segmental deformation makes use of the globe and local information of the image, the affine transformation keeps the consistency of the model, and the reformative approaches of computing the internal energy and external energy are proposed to reduce the algorithm complexity. The adaptive method of defining the search area at the second stage makes the model converge quickly. The experimental results indicate that the proposed model is effective and robust to local minima and able to search for concave objects.

  6. Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler

    Institute of Scientific and Technical Information of China (English)

    ZHOU Nai-jun; XU Qiong-hui; ZHOU Ping

    2005-01-01

    Considering the fact that the temperature distribution in furnace of a tangential fired pulverized coal boiler is difficult to be measured and monitored, two-stage numerical simulation method was put forward. First, multi-field coupling simulation in typical work conditions was carried out off-line with the software CFX-4.3, and then the expression of temperature profile varying with operating parameter was obtained. According to real-time operating parameters, the temperature at arbitrary point of the furnace can be calculated by using this expression. Thus the temperature profile can be shown on-line and monitoring for combustion state in the furnace is realized. The simul-ation model was checked by the parameters measured in an operating boiler, DG130-9.8/540. The maximum of relative error is less than 12% and the absolute error is less than 120 ℃, which shows that the proposed two-stage simulation method is reliable and able to satisfy the requirement of industrial application.

  7. Biomass waste gasification - can be the two stage process suitable for tar reduction and power generation?

    Science.gov (United States)

    Sulc, Jindřich; Stojdl, Jiří; Richter, Miroslav; Popelka, Jan; Svoboda, Karel; Smetana, Jiří; Vacek, Jiří; Skoblja, Siarhei; Buryan, Petr

    2012-04-01

    A pilot scale gasification unit with novel co-current, updraft arrangement in the first stage and counter-current downdraft in the second stage was developed and exploited for studying effects of two stage gasification in comparison with one stage gasification of biomass (wood pellets) on fuel gas composition and attainable gas purity. Significant producer gas parameters (gas composition, heating value, content of tar compounds, content of inorganic gas impurities) were compared for the two stage and the one stage method of the gasification arrangement with only the upward moving bed (co-current updraft). The main novel features of the gasifier conception include grate-less reactor, upward moving bed of biomass particles (e.g. pellets) by means of a screw elevator with changeable rotational speed and gradual expanding diameter of the cylindrical reactor in the part above the upper end of the screw. The gasifier concept and arrangement are considered convenient for thermal power range 100-350 kW(th). The second stage of the gasifier served mainly for tar compounds destruction/reforming by increased temperature (around 950°C) and for gasification reaction of the fuel gas with char. The second stage used additional combustion of the fuel gas by preheated secondary air for attaining higher temperature and faster gasification of the remaining char from the first stage. The measurements of gas composition and tar compound contents confirmed superiority of the two stage gasification system, drastic decrease of aromatic compounds with two and higher number of benzene rings by 1-2 orders. On the other hand the two stage gasification (with overall ER=0.71) led to substantial reduction of gas heating value (LHV=3.15 MJ/Nm(3)), elevation of gas volume and increase of nitrogen content in fuel gas. The increased temperature (>950°C) at the entrance to the char bed caused also substantial decrease of ammonia content in fuel gas. The char with higher content of ash leaving the

  8. Uptake and Distribution of Added Selenite and Selenate by Barley and Red Clover as Influenced by Sulphur

    DEFF Research Database (Denmark)

    Nielsen, Gunnar Gissel

    1973-01-01

    The uptake of added Se from selenite and selenate by barley and red clover was investigated in a pot experiment. Much more of selenate than of selenite was taken up but the Se concentrations in the plants declined more with time when selenate was the source. Increasing sulphate addition to the so...... that selenite is a better source than selenate when the Se concentration in the plants has to be raised to a level sufficient for livestock nutrition.......The uptake of added Se from selenite and selenate by barley and red clover was investigated in a pot experiment. Much more of selenate than of selenite was taken up but the Se concentrations in the plants declined more with time when selenate was the source. Increasing sulphate addition to the soil...

  9. Straw Gasification in a Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Hindsgaul, Claus; Henriksen, Ulrik Birk

    2002-01-01

    - and to maintain a high fuel reactivity, a mixture of phosphorus acid, calcium hydroxide, molasses and water was mixed into the ground pellets. Following the gasifier was running continuously for more than 50 hours as planned. Several tar, gas and particle measurements were carried out during the test, and the ash...... residues were examined after the test. No agglomeration or sintering was observed in the ash residues. The tar content was measured both by solid phase amino adsorption (SPA) method and cold trapping (Petersen method). Both showed low tar contents (~42 mg/Nm3 without gas cleaning). The particle content...

  10. Using Errors to Teach through a Two-Staged, Structured Review: Peer-Reviewed Quizzes and "What's Wrong with Me?"

    Science.gov (United States)

    Coppola, Brian P.; Pontrello, Jason K.

    2014-01-01

    Using errors as a method of learning has been made explicit through a two-staged peer review and discussion. During organic chemistry discussion sessions, quizzes are followed by a structured peer review designed to help students identify and discuss student errors. After the face-to-face discussion, a second stage of review involves analyzing and…

  11. External Fixation versus two-stage Open Reduction Internal Fixation of distal intra-articular Tibia fractures; a Systematic Review

    DEFF Research Database (Denmark)

    Ladeby Erichsen, Julie; Jensen, Carsten; Damborg, Frank Lindhøj

    Internal Fixation (ORIF) or External Fixation (EF). Method : A search was conducted using PUBMED, Embase, Cochrane Central, Open Grey, Orthopaedic Proceedings and WHO International Clinical Trials Registry Platform. Studies with level of evidence I-IV comparing EF with two-stage ORIF of DIATF in patients...

  12. Oxygen isotope indicators of selenate reaction with Fe(II) and Fe(III) hydroxides.

    Science.gov (United States)

    Schellenger, Alexandra E P; Larese-Casanova, Philip

    2013-06-18

    Selenate (SeO(4)(2-)) reduction to elemental selenium is an important Se immobilization process in subsurface environments that could be mediated by Fe(II)-rich minerals or selenate-respiring microorganisms. We report the kinetic isotope effects for (18)O within selenate during abiotic reactions with iron-bearing hydroxides within laboratory experiments. Selenate was reduced to Se(0) by a green rust (chloride interlayer type) and ferrous hydroxide, the two known environmentally relevant mineral reductants for selenate. Reaction kinetics are described by a rapid, low-fractionating uptake step caused by diffusive exchange between selenate and chloride followed by a slower, high-fractionating reduction step caused by electron transfer from structural Fe(II). The dual-phase kinetics cannot be described with the traditional Rayleigh fractionation model; however, well after the initial uptake step, the extent of selenate reaction is well correlated with δ(18)O values in accordance with the Rayleigh model. Selenate-(18)O enrichment (εO) was nearly identical for reaction with chloride green rust (22.7 ± 2.2‰) and ferrous hydroxide (22.1 ± 1.1‰) which suggests a common reduction mechanism by structural Fe(II). The minor enrichment due to anion exchange alone (1.4 ± 0.2‰) was confirmed using iowaite, a nonredox active Mg(II)-Fe(III) layered double hydroxide. Our εO results may contribute to Se isotope forensics to identify selenate reduction within field sites and to possibly distinguish between abiotic and biotic reduction processes.

  13. A two-stage series diode for intense large-area moderate pulsed X rays production

    Science.gov (United States)

    Lai, Dingguo; Qiu, Mengtong; Xu, Qifu; Su, Zhaofeng; Li, Mo; Ren, Shuqing; Huang, Zhongliang

    2017-01-01

    This paper presents a method for moderate pulsed X rays produced by a series diode, which can be driven by high voltage pulse to generate intense large-area uniform sub-100-keV X rays. A two stage series diode was designed for Flash-II accelerator and experimentally investigated. A compact support system of floating converter/cathode was invented, the extra cathode is floating electrically and mechanically, by withdrawing three support pins several milliseconds before a diode electrical pulse. A double ring cathode was developed to improve the surface electric field and emission stability. The cathode radii and diode separation gap were optimized to enhance the uniformity of X rays and coincidence of the two diode voltages based on the simulation and theoretical calculation. The experimental results show that the two stage series diode can work stably under 700 kV and 300 kA, the average energy of X rays is 86 keV, and the dose is about 296 rad(Si) over 615 cm2 area with uniformity 2:1 at 5 cm from the last converter. Compared with the single diode, the average X rays' energy reduces from 132 keV to 88 keV, and the proportion of sub-100-keV photons increases from 39% to 69%.

  14. Multiobjective Two-Stage Stochastic Programming Problems with Interval Discrete Random Variables

    Directory of Open Access Journals (Sweden)

    S. K. Barik

    2012-01-01

    Full Text Available Most of the real-life decision-making problems have more than one conflicting and incommensurable objective functions. In this paper, we present a multiobjective two-stage stochastic linear programming problem considering some parameters of the linear constraints as interval type discrete random variables with known probability distribution. Randomness of the discrete intervals are considered for the model parameters. Further, the concepts of best optimum and worst optimum solution are analyzed in two-stage stochastic programming. To solve the stated problem, first we remove the randomness of the problem and formulate an equivalent deterministic linear programming model with multiobjective interval coefficients. Then the deterministic multiobjective model is solved using weighting method, where we apply the solution procedure of interval linear programming technique. We obtain the upper and lower bound of the objective function as the best and the worst value, respectively. It highlights the possible risk involved in the decision-making tool. A numerical example is presented to demonstrate the proposed solution procedure.

  15. Metamodeling and Optimization of a Blister Copper Two-Stage Production Process

    Science.gov (United States)

    Jarosz, Piotr; Kusiak, Jan; Małecki, Stanisław; Morkisz, Paweł; Oprocha, Piotr; Pietrucha, Wojciech; Sztangret, Łukasz

    2016-06-01

    It is often difficult to estimate parameters for a two-stage production process of blister copper (containing 99.4 wt.% of Cu metal) as well as those for most industrial processes with high accuracy, which leads to problems related to process modeling and control. The first objective of this study was to model flash smelting and converting of Cu matte stages using three different techniques: artificial neural networks, support vector machines, and random forests, which utilized noisy technological data. Subsequently, more advanced models were applied to optimize the entire process (which was the second goal of this research). The obtained optimal solution was a Pareto-optimal one because the process consisted of two stages, making the optimization problem a multi-criteria one. A sequential optimization strategy was employed, which aimed for optimal control parameters consecutively for both stages. The obtained optimal output parameters for the first smelting stage were used as input parameters for the second converting stage. Finally, a search for another optimal set of control parameters for the second stage of a Kennecott-Outokumpu process was performed. The optimization process was modeled using a Monte-Carlo method, and both modeling parameters and computed optimal solutions are discussed.

  16. Two-stage electrodialytic concentration of glyceric acid from fermentation broth.

    Science.gov (United States)

    Habe, Hiroshi; Shimada, Yuko; Fukuoka, Tokuma; Kitamoto, Dai; Itagaki, Masayuki; Watanabe, Kunihiko; Yanagishita, Hiroshi; Sakaki, Keiji

    2010-12-01

    The aim of this research was the application of a two-stage electrodialysis (ED) method for glyceric acid (GA) recovery from fermentation broth. First, by desalting ED, glycerate solutions (counterpart is Na+) were concentrated using ion-exchange membranes, and the glycerate recovery and energy consumption became more efficient with increasing the initial glycerate concentration (30 to 130 g/l). Second, by water-splitting ED, the concentrated glycerate was electroconverted to GA using bipolar membranes. Using a culture broth of Acetobacter tropicalis containing 68.6 g/l of D-glycerate, a final D-GA concentration of 116 g/l was obtained following the two-stage ED process. The total energy consumption for the D-glycerate concentration and its electroconversion to D-GA was approximately 0.92 kWh per 1 kg of D-GA. Copyright © 2010 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  17. Two staged incentive contract focused on efficiency and innovation matching in critical chain project management

    Directory of Open Access Journals (Sweden)

    Min Zhang

    2014-09-01

    Full Text Available Purpose: The purpose of this paper is to define the relative optimal incentive contract to effectively encourage employees to improve work efficiency while actively implementing innovative behavior. Design/methodology/approach: This paper analyzes a two staged incentive contract coordinated with efficiency and innovation in Critical Chain Project Management using learning real options, based on principle-agent theory. The situational experiment is used to analyze the validity of the basic model. Finding: The two staged incentive scheme is more suitable for employees to create and implement learning real options, which will throw themselves into innovation process efficiently in Critical Chain Project Management. We prove that the combination of tolerance for early failure and reward for long-term success is effective in motivating innovation. Research limitations/implications: We do not include the individual characteristics of uncertain perception, which might affect the consistency of external validity. The basic model and the experiment design need to improve. Practical Implications: The project managers should pay closer attention to early innovation behavior and monitoring feedback of competition time in the implementation of Critical Chain Project Management. Originality/value: The central contribution of this paper is the theoretical and experimental analysis of incentive schemes for innovation in Critical Chain Project Management using the principal-agent theory, to encourage the completion of CCPM methods as well as imitative free-riding on the creative ideas of other members in the team.

  18. Two-stage atlas subset selection in multi-atlas based image segmentation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Tingting, E-mail: tingtingzhao@mednet.ucla.edu; Ruan, Dan, E-mail: druan@mednet.ucla.edu [The Department of Radiation Oncology, University of California, Los Angeles, California 90095 (United States)

    2015-06-15

    Purpose: Fast growing access to large databases and cloud stored data presents a unique opportunity for multi-atlas based image segmentation and also presents challenges in heterogeneous atlas quality and computation burden. This work aims to develop a novel two-stage method tailored to the special needs in the face of large atlas collection with varied quality, so that high-accuracy segmentation can be achieved with low computational cost. Methods: An atlas subset selection scheme is proposed to substitute a significant portion of the computationally expensive full-fledged registration in the conventional scheme with a low-cost alternative. More specifically, the authors introduce a two-stage atlas subset selection method. In the first stage, an augmented subset is obtained based on a low-cost registration configuration and a preliminary relevance metric; in the second stage, the subset is further narrowed down to a fusion set of desired size, based on full-fledged registration and a refined relevance metric. An inference model is developed to characterize the relationship between the preliminary and refined relevance metrics, and a proper augmented subset size is derived to ensure that the desired atlases survive the preliminary selection with high probability. Results: The performance of the proposed scheme has been assessed with cross validation based on two clinical datasets consisting of manually segmented prostate and brain magnetic resonance images, respectively. The proposed scheme demonstrates comparable end-to-end segmentation performance as the conventional single-stage selection method, but with significant computation reduction. Compared with the alternative computation reduction method, their scheme improves the mean and medium Dice similarity coefficient value from (0.74, 0.78) to (0.83, 0.85) and from (0.82, 0.84) to (0.95, 0.95) for prostate and corpus callosum segmentation, respectively, with statistical significance. Conclusions: The authors

  19. The Application of Two-stage Structure Decomposition Technique to the Study of Industrial Carbon Emissions

    Institute of Scientific and Technical Information of China (English)

    Yanqiu HE

    2015-01-01

    The total carbon emissions control is the ultimate goal of carbon emission reduction, while industrial carbon emissions are the basic units of the total carbon emission. On the basis of existing research results, in this paper, a two-stage input-output structure decomposition method is creatively proposed for fully combining the input-output method with the structure decomposition technique. In this study, more comprehensive technical progress indicators were chosen in comparison with the previous studies and included the utilization efficiency of all kinds of intermediate inputs such as energy and non-energy products, and finally were positioned at the factors affecting the carbon emissions of different industries. Through analysis, the affecting rate of each factor on industrial carbon emissions was acquired. Thus, a theory basis and data support is provided for the total carbon emissions control of China from the perspective of industrial emissions.

  20. A wavelet-based two-stage near-lossless coder.

    Science.gov (United States)

    Yea, Sehoon; Pearlman, William A

    2006-11-01

    In this paper, we present a two-stage near-lossless compression scheme. It belongs to the class of "lossy plus residual coding" and consists of a wavelet-based lossy layer followed by arithmetic coding of the quantized residual to guarantee a given L(infinity) error bound in the pixel domain. We focus on the selection of the optimum bit rate for the lossy layer to achieve the minimum total bit rate. Unlike other similar lossy plus lossless approaches using a wavelet-based lossy layer, the proposed method does not require iteration of decoding and inverse discrete wavelet transform in succession to locate the optimum bit rate. We propose a simple method to estimate the optimal bit rate, with a theoretical justification based on the critical rate argument from the rate-distortion theory and the independence of the residual error.

  1. A Two-Stage Diagnosis Framework for Wind Turbine Gearbox Condition Monitoring

    Directory of Open Access Journals (Sweden)

    Janet M. Twomey

    2013-01-01

    Full Text Available Advances in high performance sensing technologies enable the development of wind turbine condition monitoring system to diagnose and predict the system-wide effects of failure events. This paper presents a vibration-based two stage fault detection framework for failure diagnosis of rotating components in wind turbines. The proposed framework integrates an analytical defect detection method and a graphical verification method together to ensure the diagnosis efficiency and accuracy. The efficacy of the proposed methodology is demonstrated with a case study with the gearbox condition monitoring Round Robin study dataset provided by the National Renewable Energy Laboratory (NREL. The developed methodology successfully picked five faults out of seven in total with accurate severity levels without producing any false alarm in the blind analysis. The case study results indicated that the developed fault detection framework is effective for analyzing gear and bearing faults in wind turbine drive train system based upon system vibration characteristics.

  2. A Two-Stage LGSM for Three-Point BVPs of Second-Order ODEs

    Directory of Open Access Journals (Sweden)

    Chein-Shan Liu

    2008-08-01

    Full Text Available The study in this paper is a numerical integration of second-order three-point boundary value problems under two imposed nonlocal boundary conditions at t=t0, t=ξ, and t=t1 in a general setting, where t0<ξtwo-stage Lie-group shooting method for finding unknown initial conditions, which are obtained through an iterative solution of derived algebraic equations in terms of a weighting factor r∈(0,1. The best r is selected by matching the target with a minimal discrepancy. Numerical examples are examined to confirm that the new approach has high efficiency and accuracy with a fast speed of convergence. Even for multiple solutions, the present method is also effective to find them.

  3. A Two-Stage LGSM for Three-Point BVPs of Second-Order ODEs

    Directory of Open Access Journals (Sweden)

    Liu Chein-Shan

    2008-01-01

    Full Text Available Abstract The study in this paper is a numerical integration of second-order three-point boundary value problems under two imposed nonlocal boundary conditions at , , and in a general setting, where . We construct a two-stage Lie-group shooting method for finding unknown initial conditions, which are obtained through an iterative solution of derived algebraic equations in terms of a weighting factor . The best is selected by matching the target with a minimal discrepancy. Numerical examples are examined to confirm that the new approach has high efficiency and accuracy with a fast speed of convergence. Even for multiple solutions, the present method is also effective to find them.

  4. Evaluation of a Two-Stage Approach in Trans-Ethnic Meta-Analysis in Genome-Wide Association Studies.

    Science.gov (United States)

    Hong, Jaeyoung; Lunetta, Kathryn L; Cupples, L Adrienne; Dupuis, Josée; Liu, Ching-Ti

    2016-05-01

    Meta-analysis of genome-wide association studies (GWAS) has achieved great success in detecting loci underlying human diseases. Incorporating GWAS results from diverse ethnic populations for meta-analysis, however, remains challenging because of the possible heterogeneity across studies. Conventional fixed-effects (FE) or random-effects (RE) methods may not be most suitable to aggregate multiethnic GWAS results because of violation of the homogeneous effect assumption across studies (FE) or low power to detect signals (RE). Three recently proposed methods, modified RE (RE-HE) model, binary-effects (BE) model and a Bayesian approach (Meta-analysis of Transethnic Association [MANTRA]), show increased power over FE and RE methods while incorporating heterogeneity of effects when meta-analyzing trans-ethnic GWAS results. We propose a two-stage approach to account for heterogeneity in trans-ethnic meta-analysis in which we clustered studies with cohort-specific ancestry information prior to meta-analysis. We compare this to a no-prior-clustering (crude) approach, evaluating type I error and power of these two strategies, in an extensive simulation study to investigate whether the two-stage approach offers any improvements over the crude approach. We find that the two-stage approach and the crude approach for all five methods (FE, RE, RE-HE, BE, MANTRA) provide well-controlled type I error. However, the two-stage approach shows increased power for BE and RE-HE, and similar power for MANTRA and FE compared to their corresponding crude approach, especially when there is heterogeneity across the multiethnic GWAS results. These results suggest that prior clustering in the two-stage approach can be an effective and efficient intermediate step in meta-analysis to account for the multiethnic heterogeneity.

  5. An inexact mixed risk-aversion two-stage stochastic programming model for water resources management under uncertainty.

    Science.gov (United States)

    Li, W; Wang, B; Xie, Y L; Huang, G H; Liu, L

    2015-02-01

    Uncertainties exist in the water resources system, while traditional two-stage stochastic programming is risk-neutral and compares the random variables (e.g., total benefit) to identify the best decisions. To deal with the risk issues, a risk-aversion inexact two-stage stochastic programming model is developed for water resources management under uncertainty. The model was a hybrid methodology of interval-parameter programming, conditional value-at-risk measure, and a general two-stage stochastic programming framework. The method extends on the traditional two-stage stochastic programming method by enabling uncertainties presented as probability density functions and discrete intervals to be effectively incorporated within the optimization framework. It could not only provide information on the benefits of the allocation plan to the decision makers but also measure the extreme expected loss on the second-stage penalty cost. The developed model was applied to a hypothetical case of water resources management. Results showed that that could help managers generate feasible and balanced risk-aversion allocation plans, and analyze the trade-offs between system stability and economy.

  6. Results obtained by geodetic instruments of SELENE (KAGUYA)

    Institute of Scientific and Technical Information of China (English)

    KAWANO; Nobuyuki; VRAD/RSAT; Team; LALT; Team

    2010-01-01

    Japanese lunar explorer SELENE (KAGUYA) was equipped with 14 instruments for various measurements of the Moon. Three of these instruments took geodetic measurements of the Moon. These were two sub-satellites and a laser altimeter. The main results obtained by the instruments are: (1) precise orbit determination with an accuracy of ten meters by Doppler and same-beam VLBI; (2) the first precise gravity fields on the lunar far side by 4-way Doppler measurements; (3) the first topography in latitudes higher than 86 degrees; (4) a global map of the gravity anomaly by using the global topography and the global gravity fields; (5) a global map of the lunar crustal thickness and (6) an illumination rate map in the north and south polar regions.

  7. Sorption of selenate on soils and pure phases: kinetic parameters and stabilisation

    Energy Technology Data Exchange (ETDEWEB)

    Loffredo, N. [Institut de Radioprotection et Surete Nucleaire (IRSN), DEI/SECRE/Laboratoire de Radioecologie et d' Ecotoxicologie, Cadarache, Bat 186, BP3, 13115 Saint-Paul-lez-Durance Cedex (France); Mounier, S. [Laboratoire PROTEE, Universite du Sud Toulon-Var, BP 20132, La Garde 83957 (France); Thiry, Y. [Agence Nationale pour la gestion des Dechets Radioactifs (Andra), Parc de la Croix Blanche, 1/7 rue Jean Monnet, 92298 Chatenay-Malabry Cedex (France); Coppin, F., E-mail: frederic.coppin@irsn.fr [Institut de Radioprotection et Surete Nucleaire (IRSN), DEI/SECRE/Laboratoire de Radioecologie et d' Ecotoxicologie, Cadarache, Bat 186, BP3, 13115 Saint-Paul-lez-Durance Cedex (France)

    2011-09-15

    This study was conducted to identify the principle selenate carrier phases for two selected soils, by comparing their reactivity with selenate to that of pure phases of the solids. Silica, calcium carbonate, aluminium hydroxide, goethite, bentonite and humic acid were selected as the main soil carrier phases. Comparisons were made first on the parameter values obtained with the best fit of a kinetic sorption model which can discriminate instantaneous sorption from kinetically limited sorption. Then comparisons were made of the ability for each solid to stabilise selenate by measuring the ratio of the partition coefficient for sorption (Kd{sub sorption}) over that of the desorption (Kd{sub desorption}). Kinetics and stabilisation were used to help elucidate the nature of interactions with the test solid phases for a large range of selenate concentrations. The experiments were conducted over 165 h in batch reactors, the solid being isolated from the solution by dialysis tubing, at two pH (5.4 and 8) and three selenate concentrations (1 x 10{sup -3}, 1 x 10{sup -6} and 1 x 10{sup -8} mol L{sup -1}). The results obtained showed that only aluminium hydroxide can sorb selenate throughout the studied pH range (pH 5.4 to 8.0). The sorption capacity on this mineral was high (Kd{sub sorption} > 100 to 1 x 10{sup 4} L kg{sup -1}) and the selenate was mainly stabilized by the formation of inner sphere complexes. The sorption on goethite occurred at pH 5.4 (Kd{sub sorption} 52 L kg{sup -1}), mainly as outer sphere complexes, and was null at pH 8. On silica, a weak sorption was observed only at pH 5.4 and at 165 h (Kd{sub sorption} 4 L kg{sup -1}). On bentonite, calcium carbonate and humic acid no significant sorption was observed. Concerning the two soils studied, different behaviours were observed for selenate. For soil Ro (pH 5.4), Kd{sub sorption} was low (8 L kg{sup -1}) compared to soil Bu (pH 8) (70 L kg{sup -1}). The sorption behaviour of selenate on soil Ro was mainly

  8. 'Check it out!' Decision-making of vulnerable groups about participation in a two-stage cardiometabolic health check: a qualitative study

    NARCIS (Netherlands)

    Groenenberg, I.; Crone, M.R.; Dijk, S. van; Gebhardt, W.A.; Meftah, J. Ben; Middelkoop, B.J.C.; Stiggelbout, A.M.; Assendelft, W.J.

    2015-01-01

    OBJECTIVE: Exploring determinants influencing vulnerable groups regarding (non-) participation in the Dutch two-stage cardiometabolic health check, comprising a health risk assessment (HRA) and prevention consultations (PCs) for high-risk individuals. METHODS: Qualitative study comprising 21 focus

  9. 'Check it out!' Decision-making of vulnerable groups about participation in a two-stage cardiometabolic health check: a qualitative study

    NARCIS (Netherlands)

    Groenenberg, I.; Crone, M.R.; Dijk, S. van; Gebhardt, W.A.; Meftah, J. Ben; Middelkoop, B.J.C.; Stiggelbout, A.M.; Assendelft, W.J.

    2015-01-01

    OBJECTIVE: Exploring determinants influencing vulnerable groups regarding (non-) participation in the Dutch two-stage cardiometabolic health check, comprising a health risk assessment (HRA) and prevention consultations (PCs) for high-risk individuals. METHODS: Qualitative study comprising 21 focus g

  10. Study of a two-stage photobase generator for photolithography in microelectronics.

    Science.gov (United States)

    Turro, Nicholas J; Li, Yongjun; Jockusch, Steffen; Hagiwara, Yuji; Okazaki, Masahiro; Mesch, Ryan A; Schuster, David I; Willson, C Grant

    2013-03-01

    The investigation of the photochemistry of a two-stage photobase generator (PBG) is described. Absorption of a photon by a latent PBG (1) (first step) produces a PBG (2). Irradiation of 2 in the presence of water produces a base (second step). This two-photon sequence (1 + hν → 2 + hν → base) is an important component in the design of photoresists for pitch division technology, a method that doubles the resolution of projection photolithography for the production of microelectronic chips. In the present system, the excitation of 1 results in a Norrish type II intramolecular hydrogen abstraction to generate a 1,4-biradiacal that undergoes cleavage to form 2 and acetophenone (Φ ∼ 0.04). In the second step, excitation of 2 causes cleavage of the oxime ester (Φ = 0.56) followed by base generation after reaction with water.

  11. A Sensorless Power Reserve Control Strategy for Two-Stage Grid-Connected PV Systems

    DEFF Research Database (Denmark)

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede

    2017-01-01

    Due to the still increasing penetration of grid-connected Photovoltaic (PV) systems, advanced active power control functionalities have been introduced in grid regulations. A power reserve control, where namely the active power from the PV panels is reserved during operation, is required for grid...... to achieve the power reserve. In this method, the solar irradiance and temperature measurements that have been used in conventional power reserve control schemes to estimate the available PV power are not required, and thereby being a sensorless approach with reduced cost. Experimental tests have been...... support. In this paper, a cost-effective solution to realize the power reserve for two-stage grid-connected PV systems is proposed. The proposed solution routinely employs a Maximum Power Point Tracking (MPPT) control to estimate the available PV power and a Constant Power Generation (CPG) control...

  12. Sensorless Reserved Power Control Strategy for Two-Stage Grid-Connected Photovoltaic Systems

    DEFF Research Database (Denmark)

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede

    2016-01-01

    Due to still increasing penetration level of grid-connected Photovoltaic (PV) systems, advanced active power control functionalities have been introduced in grid regulations. A reserved power control, where the active power from the PV panels is reserved during operation, is required for grid...... to achieve the power reserve. In this method, the irradiance measurements that have been used in conventional control schemes to estimate the available PV power are not required, and thereby being a sensorless solution. Simulations and experimental tests have been performed on a 3-kW two-stage single...... support. In this paper, a cost-effective solution to realize the reserved power control for grid-connected PV systems is proposed. The proposed solution routinely employs a Maximum Power Point Tracking (MPPT) control to estimate the available PV power and a Constant Power Generation (CPG) control...

  13. Quasi-estimation as a Basis for Two-stage Solving of Regression Problem

    CERN Document Server

    Gordinsky, Anatoly

    2010-01-01

    An effective two-stage method for an estimation of parameters of the linear regression is considered. For this purpose we introduce a certain quasi-estimator that, in contrast to usual estimator, produces two alternative estimates. It is proved that, in comparison to the least squares estimate, one alternative has a significantly smaller quadratic risk, retaining at the same time unbiasedness and consistency. These properties hold true for one-dimensional, multi-dimensional, orthogonal and non-orthogonal problems. Moreover, a Monte-Carlo simulation confirms high robustness of the quasi-estimator to violations of the initial assumptions. Therefore, at the first stage of the estimation we calculate mentioned two alternative estimates. At the second stage we choose the better estimate out of these alternatives. In order to do so we use additional information, among it but not exclusively of a priori nature. In case of two alternatives the volume of such information should be minimal. Furthermore, the additional ...

  14. A characteristics study on the performance of a two-stage light gas gun

    Institute of Scientific and Technical Information of China (English)

    吴应湘; 郑之初; P.Kupschus

    1995-01-01

    In order to obtain an overall and systematic understanding of the performance of a two-stage light gas gun (TLGG), a numerical code to simulate the process occurring in a gun shot is advanced based on the quasi-one-dimensional unsteady equations of motion with the real gas effect, friction and heat transfer taken into account in a characteristic formulation for both driver and propellant gas. Comparisons of projectile velocities and projectile pressures along the barrel with experimental results from JET (Joint European Torus) and with computational data got by the Lagrangian method indicate that this code can provide results with good accuracy over a wide range of gun geometry and loading conditions.

  15. A Two-Stage Approach for Medical Supplies Intermodal Transportation in Large-Scale Disaster Responses

    Directory of Open Access Journals (Sweden)

    Junhu Ruan

    2014-10-01

    Full Text Available We present a two-stage approach for the “helicopters and vehicles” intermodal transportation of medical supplies in large-scale disaster responses. In the first stage, a fuzzy-based method and its heuristic algorithm are developed to select the locations of temporary distribution centers (TDCs and assign medial aid points (MAPs to each TDC. In the second stage, an integer-programming model is developed to determine the delivery routes. Numerical experiments verified the effectiveness of the approach, and observed several findings: (i More TDCs often increase the efficiency and utility of medical supplies; (ii It is not definitely true that vehicles should load more and more medical supplies in emergency responses; (iii The more contrasting the traveling speeds of helicopters and vehicles are, the more advantageous the intermodal transportation is.

  16. Treatment of Domestic Sewage by Two-Stage-Bio-Contact Oxidation Process

    Institute of Scientific and Technical Information of China (English)

    LI Xiang-dong; FENG Qi-yan; LIU Zhong-wei; XIAO Xin; LIN Guo-hua

    2005-01-01

    Effects of hydraulic retention time (HRT) and gas volume on efficiency of wastewater treatment are discussed based on a simulation experiment in which the domestic swage was treated by the two-stage-bio-contact oxidation process. The result shows that the average CODcr, BOD5, suspended solid (SS), and ammonia-nitrogen removal rate are 94.5 %, 93.2 %, 91.7 % and 46.9 %, respectively, under the conditions of a total air/water ratio of 5: 1 , an air/water ratio of 3:1 for oxidation tank 1 and 2:1for oxidation tank 2 and a hydraulic retention time of 1 h for each stage. This method is suitable for domestic sewage treatment of residential community and small towns as well.

  17. Synchronous rapid start-up of the methanation and anammox processes in two-stage ASBRs

    Science.gov (United States)

    Duan, Y.; Li, W. R.; Zhao, Y.

    2017-01-01

    The “methanation + anaerobic ammonia oxidation autotrophic denitrification” method was adopted by using anaerobic sequencing batch reactors (ASBRs) and realized a satisfactory synchronous removal of chemical oxygen demand (COD) and ammonia-nitrogen (NH4 +-N) in wastewater after 75 days operation. 90% of COD was removed at a COD load of 1.2 kg/(m3•d) and 90% of TN was removed at a TN load of 0.14 kg/(m3•d). The anammox reaction ratio was estimated to be 1: 1.32: 0.26. The results showed that synchronous rapid start-up of the methanation and anaerobic ammonia oxidation processes in two-stage ASBRs was feasible.

  18. Effekt of a two-stage nursing assesment and intervention - a randomized intervention study

    DEFF Research Database (Denmark)

    Rosted, Elizabeth Emilie; Poulsen, Ingrid; Hendriksen, Carsten

    to the geriatric outpatient clinic, community health centre, primary physician or arrangements with next-of-kin. Findings: Primary endpoints will be presented as unplanned readmission to ED; admission to nursing home; and death. Secondary endpoints will be presented as physical function; depressive symptoms......Background: Geriatric patients recently discharged from hospital are at risk of unplanned readmissions and admission to nursing home. When discharged directly from Emergency Department (ED) the risk increases, as time pressure often requires focus on the presenting problem, although 80...... % of geriatric patients have complex and often unresolved caring needs. The objective was to examine the effect of a two-stage nursing assessment and intervention to address the patients uncompensated problems given just after discharge from ED and one and six months after. Method: We conducted a prospective...

  19. Colorimetric characterization of liquid crystal display using an improved two-stage model

    Institute of Scientific and Technical Information of China (English)

    Yong Wang; Haisong Xu

    2006-01-01

    @@ An improved two-stage model of colorimetric characterization for liquid crystal display (LCD) was proposed. The model included an S-shape nonlinear function with four coefficients for each channel to fit the Tone reproduction curve (TRC), and a linear transfer matrix with black-level correction. To compare with the simple model (SM), gain-offset-gain (GOG), S-curve and three-one-dimensional look-up tables (3-1D LUTs) models, an identical LCD was characterized and the color differences were calculated and summarized using the set of 7 × 7 × 7 digital-to-analog converter (DAC) triplets as test data. The experimental results showed that the model was outperformed in comparison with the GOG and SM ones, and near to that of the S-curve model and 3-1D LUTs method.

  20. Fast Image Segmentation Based on a Two-Stage Geometrical Active Contour

    Institute of Scientific and Technical Information of China (English)

    肖昌炎; 张素; 陈亚珠

    2005-01-01

    A fast two-stage geometric active contour algorithm for image segmentation is developed. First, the Eikonal equation problem is quickly solved using an improved fast sweeping method, and a criterion of local minimum of area gradient (LMAG) is presented to extract the optimal arrival time. Then, the final time function is passed as an initial state to an area and length minimizing flow model, which adjusts the interface more accurately and prevents it from leaking. For object with complete and salient edge, using the first stage only is able to obtain an ideal result, and this results in a time complexity of O(M), where M is the number of points in each coordinate direction. Both stages are needed for convoluted shapes, but the computation cost can be drastically reduced. Efficiency of the algorithm is verified in segmentation experiments of real images with different feature.

  1. Selen og vitamin E til søer og pattegrise

    DEFF Research Database (Denmark)

    Nielsen, H. E.; Danielsen, V.; Simesen, M. G.

    1977-01-01

    Formålet med dette forsøg var at undersøge virkningen af foderets selen- og vitamin E indhold på søernes frugtbarhed og pattegrisenes levedygtighed og vækst. Endvidere at undersøge koncentrationen af selen (Se) og vitamin E i råmælk, somælk og blod i relation til foderet. Der forekom enkelte døds...

  2. Preparation of Cu{sub 2}ZnSnSe{sub 4} solar cells by low-temperature co-evaporation and following selenization

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Chao, E-mail: chao.gao@kit.edu; Hetterich, Michael [Institute of Applied Physics, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany); Schnabel, Thomas; Abzieher, Tobias; Ahlswede, Erik [Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), 70565 Stuttgart (Germany); Powalla, Michael [Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW), 70565 Stuttgart (Germany); Light Technology Institute (LTI), Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany)

    2016-01-04

    Cu{sub 2}ZnSnSe{sub 4} (CZTSe) thin films are prepared by a two-step method which involves co-evaporation of Cu, Zn, Sn, and Se on molybdenum-coated soda-lime glass at low substrate temperature and a following selenization. Solar cells with efficiencies of up to 6.5% can be achieved. The influence of the selenium deposition rates during co-evaporation and the nitrogen pressure during selenization on the properties of the CZTSe films are investigated. It is found that these two parameters can significantly affect the morphology and crystallinity of the CZTSe films. The possible reasons for the experimental results are discussed.

  3. Preemptive scheduling in a two-stage supply chain to minimize the makespan

    NARCIS (Netherlands)

    Pei, Jun; Fan, Wenjuan; Pardalos, Panos M.; Liu, Xinbao; Goldengorin, Boris; Yang, Shanlin

    2015-01-01

    This paper deals with the problem of preemptive scheduling in a two-stage supply chain framework. The supply chain environment contains two stages: production and transportation. In the production stage jobs are processed on a manufacturer's bounded serial batching machine, preemptions are allowed,

  4. Two-stage vs single-stage management for concomitant gallstones and common bile duct stones

    Institute of Scientific and Technical Information of China (English)

    Jiong Lu; Yao Cheng; Xian-Ze Xiong; Yi-Xin Lin; Si-Jia Wu; Nan-Sheng Cheng

    2012-01-01

    AIM:To evaluate the safety and effectiveness of two-stage vs single-stage management for concomitant gallstones and common bile duct stones.METHODS:Four databases,including PubMed,Embase,the Cochrane Central Register of Controlled Trials and the Science Citation Index up to September 2011,were searched to identify all randomized controlled trials (RCTs).Data were extracted from the studies by two independent reviewers.The primary outcomes were stone clearance from the common bile duct,postoperative morbidity and mortality.The secondary outcomes were conversion to other procedures,number of procedures per patient,length of hospital stay,total operative time,hospitalization charges,patient acceptance and quality of life scores.RESULTS:Seven eligible RCTs [five trials (n =621)comparing preoperative endoscopic retrograde cholangiopancreatography (ERCP)/endoscopic sphincterotomy (EST) + laparoscopic cholecystectomy (LC) with LC +laparoscopic common bile duct exploration (LCBDE);two trials (n =166) comparing postoperative ERCP/EST + LC with LC + LCBDE],composed of 787 patients in total,were included in the final analysis.The metaanalysis detected no statistically significant difference between the two groups in stone clearance from the common bile duct [risk ratios (RR) =-0.10,95% confidence intervals (CI):-0.24 to 0.04,P =0.17],postoperative morbidity (RR =0.79,95% CI:0.58 to 1.10,P =0.16),mortality (RR =2.19,95% CI:0.33 to 14.67,P =0.42),conversion to other procedures (RR =1.21,95% CI:0.54 to 2.70,P =0.39),length of hospital stay (MD =0.99,95% CI:-1.59 to 3.57,P =0.45),total operative time (MD =12.14,95% CI:-1.83 to 26.10,P =0.09).Two-stage (LC + ERCP/EST) management clearly required more procedures per patient than single-stage (LC + LCBDE) management.CONCLUSION:Single-stage management is equivalent to two-stage management but requires fewer procedures.However,patient's condition,operator's expertise and local resources should be taken into account in

  5. Sodium selenate regulates the brain ionome in a transgenic mouse model of Alzheimer’s disease

    Science.gov (United States)

    Zheng, Lin; Zhu, Hua-Zhang; Wang, Bing-Tao; Zhao, Qiong-Hui; Du, Xiu-Bo; Zheng, Yi; Jiang, Liang; Ni, Jia-Zuan; Zhang, Yan; Liu, Qiong

    2016-01-01

    Many studies have shown that imbalance of mineral metabolism may play an important role in Alzheimer’s disease (AD) progression. It was recently reported that selenium could reverse memory deficits in AD mouse model. We carried out multi-time-point ionome analysis to investigate the interactions among 15 elements in the brain by using a triple-transgenic mouse model of AD with/without high-dose sodium selenate supplementation. Except selenium, the majority of significantly changed elements showed a reduced level after 6-month selenate supplementation, especially iron whose levels were completely reversed to normal state at almost all examined time points. We then built the elemental correlation network for each time point. Significant and specific elemental correlations and correlation changes were identified, implying a highly complex and dynamic crosstalk between selenium and other elements during long-term supplementation with selenate. Finally, we measured the activities of two important anti-oxidative selenoenzymes, glutathione peroxidase and thioredoxin reductase, and found that they were remarkably increased in the cerebrum of selenate-treated mice, suggesting that selenoenzyme-mediated protection against oxidative stress might also be involved in the therapeutic effect of selenate in AD. Overall, this study should contribute to our understanding of the mechanism related to the potential use of selenate in AD treatment. PMID:28008954

  6. Comparison of selenite and selenate apparent absorption and retention in infants using stable isotope methodology.

    Science.gov (United States)

    Van Dael, Peter; Davidsson, Lena; Ziegler, Ekhard E; Fay, Laurent B; Barclay, Denis

    2002-01-01

    The inorganic selenium compounds selenite and selenate are used for selenium fortification of infant formulas. However, information on absorption and retention of selenium from these compounds is lacking. The purpose of this study was therefore to determine apparent absorption and retention of selenium from selenate and selenite added to a milk-based infant formula in healthy infants. Labeled test meals were prepared by addition of 10 microg Se as (76)Se-selenate or (74)Se-selenite to 500 mL formula. The two batches of labeled formulas were fed as alternate feeds during the first day of the balance period, followed by unlabeled formula. Selenium isotopes were determined in feces collected for 72h after intake and in 3 consecutive 24h collections of urine. Mean apparent absorption was 97.1% for (76)Se-selenate and 73.4% for (74)Se-selenite; mean difference 23.7% (range: 13.8%-35.7%; SD 6.8%, p absorption and urinary excretion differed for selenite and selenate, selenium was equally well retained by infants from both selenium compounds. We therefore concluded that Se fortification of infant formulas with selenate or selenite can be expected to have similar impact on the selenium nutritional status of term infants.

  7. Classification of brain disease in magnetic resonance images using two-stage local feature fusion

    Science.gov (United States)

    Li, Tao; Li, Wu; Yang, Yehui

    2017-01-01

    Background Many classification methods have been proposed based on magnetic resonance images. Most methods rely on measures such as volume, the cerebral cortical thickness and grey matter density. These measures are susceptible to the performance of registration and limited in representation of anatomical structure. This paper proposes a two-stage local feature fusion method, in which deformable registration is not desired and anatomical information is represented from moderate scale. Methods Keypoints are firstly extracted from scale-space to represent anatomical structure. Then, two kinds of local features are calculated around the keypoints, one for correspondence and the other for representation. Scores are assigned for keypoints to quantify their effect in classification. The sum of scores for all effective keypoints is used to determine which group the test subject belongs to. Results We apply this method to magnetic resonance images of Alzheimer's disease and Parkinson's disease. The advantage of local feature in correspondence and representation contributes to the final classification. With the help of local feature (Scale Invariant Feature Transform, SIFT) in correspondence, the performance becomes better. Local feature (Histogram of Oriented Gradient, HOG) extracted from 16×16 cell block obtains better results compared with 4×4 and 8×8 cell block. Discussion This paper presents a method which combines the effect of SIFT descriptor in correspondence and the representation ability of HOG descriptor in anatomical structure. This method has the potential in distinguishing patients with brain disease from controls. PMID:28207873

  8. Meta-analysis using individual participant data: one-stage and two-stage approaches, and why they may differ.

    Science.gov (United States)

    Burke, Danielle L; Ensor, Joie; Riley, Richard D

    2017-02-28

    Meta-analysis using individual participant data (IPD) obtains and synthesises the raw, participant-level data from a set of relevant studies. The IPD approach is becoming an increasingly popular tool as an alternative to traditional aggregate data meta-analysis, especially as it avoids reliance on published results and provides an opportunity to investigate individual-level interactions, such as treatment-effect modifiers. There are two statistical approaches for conducting an IPD meta-analysis: one-stage and two-stage. The one-stage approach analyses the IPD from all studies simultaneously, for example, in a hierarchical regression model with random effects. The two-stage approach derives aggregate data (such as effect estimates) in each study separately and then combines these in a traditional meta-analysis model. There have been numerous comparisons of the one-stage and two-stage approaches via theoretical consideration, simulation and empirical examples, yet there remains confusion regarding when each approach should be adopted, and indeed why they may differ. In this tutorial paper, we outline the key statistical methods for one-stage and two-stage IPD meta-analyses, and provide 10 key reasons why they may produce different summary results. We explain that most differences arise because of different modelling assumptions, rather than the choice of one-stage or two-stage itself. We illustrate the concepts with recently published IPD meta-analyses, summarise key statistical software and provide recommendations for future IPD meta-analyses. © 2016 The Authors. Statistics in Medicine published by John Wiley & Sons Ltd.

  9. Design and Characterization of two stage High-Speed CMOS Operational Amplifier

    Directory of Open Access Journals (Sweden)

    Rahul Chaudhari

    2014-03-01

    Full Text Available A method described in this paper is to design a Two Stage CMOS operational amplifier and analyze the effect of various aspect ratios on the characteristics of this Op-Amp, which operates at 1.8V power supply using tsmc 0.18μm CMOS technology. In this paper trade-off curves are computed between all characteristics such as Gain, PM, GBW, ICMRR, CMRR, Slew Rate etc. The OPAMP designed is a two-stage CMOS OPAMP. The OPAMP is designed to exhibit a unity gain frequency of 14MHz and exhibits a gain of 59.98dB with a 61.235 phase margin. Design has been carried out in Mentor graphics tools. Simulation results are verified using Model Sim Eldo and Design Architect IC. The task of CMOS operational amplifiers (Op-Amps design optimization is investigated in this work. This Paper focused on the optimization of various aspect ratios, which gave the result of different parameter. When this task is analyzed as a search problem, it can be translated into a multi-objective optimization application in which various Op-Amps’ specifications have to be taken into account, i.e., Gain, GBW (gain-bandwidth product, phase margin and others. The results are compared with respect to standard characteristics of the op-amp with the help of graph and table. Simulation results agree with theoretical predictions. Simulations confirm that the settling time can be further improved by increasing the value of GBW, the settling time is achieved 19ns. It has been demonstrated that when W/L increases the parameters GBW increases and settling time reduces.

  10. Anti-kindling Induced by Two-Stage Coordinated Reset Stimulation with Weak Onset Intensity

    Science.gov (United States)

    Zeitler, Magteld; Tass, Peter A.

    2016-01-01

    Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR) stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e., unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies. PMID:27242500

  11. Focused ultrasound simultaneous irradiation/MRI imaging, and two-stage general kinetic model.

    Directory of Open Access Journals (Sweden)

    Sheng-Yao Huang

    Full Text Available Many studies have investigated how to use focused ultrasound (FUS to temporarily disrupt the blood-brain barrier (BBB in order to facilitate the delivery of medication into lesion sites in the brain. In this study, through the setup of a real-time system, FUS irradiation and injections of ultrasound contrast agent (UCA and Gadodiamide (Gd, an MRI contrast agent can be conducted simultaneously during MRI scanning. By using this real-time system, we were able to investigate in detail how the general kinetic model (GKM is used to estimate Gd penetration in the FUS irradiated area in a rat's brain resulting from UCA concentration changes after single FUS irradiation. Two-stage GKM was proposed to estimate the Gd penetration in the FUS irradiated area in a rat's brain under experimental conditions with repeated FUS irradiation combined with different UCA concentrations. The results showed that the focal increase in the transfer rate constant of Ktrans caused by BBB disruption was dependent on the doses of UCA. Moreover, the amount of in vivo penetration of Evans blue in the FUS irradiated area in a rat's brain under various FUS irradiation experimental conditions was assessed to show the positive correlation with the transfer rate constants. Compared to the GKM method, the Two-stage GKM is more suitable for estimating the transfer rate constants of the brain treated with repeated FUS irradiations. This study demonstrated that the entire process of BBB disrupted by FUS could be quantitatively monitored by real-time dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI.

  12. Condition monitoring of distributed systems using two-stage Bayesian inference data fusion

    Science.gov (United States)

    Jaramillo, Víctor H.; Ottewill, James R.; Dudek, Rafał; Lepiarczyk, Dariusz; Pawlik, Paweł

    2017-03-01

    In industrial practice, condition monitoring is typically applied to critical machinery. A particular piece of machinery may have its own condition monitoring system that allows the health condition of said piece of equipment to be assessed independently of any connected assets. However, industrial machines are typically complex sets of components that continuously interact with one another. In some cases, dynamics resulting from the inception and development of a fault can propagate between individual components. For example, a fault in one component may lead to an increased vibration level in both the faulty component, as well as in connected healthy components. In such cases, a condition monitoring system focusing on a specific element in a connected set of components may either incorrectly indicate a fault, or conversely, a fault might be missed or masked due to the interaction of a piece of equipment with neighboring machines. In such cases, a more holistic condition monitoring approach that can not only account for such interactions, but utilize them to provide a more complete and definitive diagnostic picture of the health of the machinery is highly desirable. In this paper, a Two-Stage Bayesian Inference approach allowing data from separate condition monitoring systems to be combined is presented. Data from distributed condition monitoring systems are combined in two stages, the first data fusion occurring at a local, or component, level, and the second fusion combining data at a global level. Data obtained from an experimental rig consisting of an electric motor, two gearboxes, and a load, operating under a range of different fault conditions is used to illustrate the efficacy of the method at pinpointing the root cause of a problem. The obtained results suggest that the approach is adept at refining the diagnostic information obtained from each of the different machine components monitored, therefore improving the reliability of the health assessment of

  13. Anti-kindling induced by two-stage coordinated reset stimulation with weak onset intensity

    Directory of Open Access Journals (Sweden)

    Magteld eZeitler

    2016-05-01

    Full Text Available Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e. unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies.

  14. Two-Stage Latissimus Dorsi Flap with Implant for Unilateral Breast Reconstruction: Getting the Size Right

    Directory of Open Access Journals (Sweden)

    Jiajun Feng

    2016-03-01

    Full Text Available BackgroundThe aim of unilateral breast reconstruction after mastectomy is to craft a natural-looking breast with symmetry. The latissimus dorsi (LD flap with implant is an established technique for this purpose. However, it is challenging to obtain adequate volume and satisfactory aesthetic results using a one-stage operation when considering factors such as muscle atrophy, wound dehiscence and excessive scarring. The two-stage reconstruction addresses these difficulties by using a tissue expander to gradually enlarge the skin pocket which eventually holds an appropriately sized implant.MethodsWe analyzed nine patients who underwent unilateral two-stage LD reconstruction. In the first stage, an expander was placed along with the LD flap to reconstruct the mastectomy defect, followed by gradual tissue expansion to achieve overexpansion of the skin pocket. The final implant volume was determined by measuring the residual expander volume after aspirating the excess saline. Finally, the expander was replaced with the chosen implant.ResultsThe average volume of tissue expansion was 460 mL. The resultant expansion allowed an implant ranging in volume from 255 to 420 mL to be placed alongside the LD muscle. Seven patients scored less than six on the relative breast retraction assessment formula for breast symmetry, indicating excellent breast symmetry. The remaining two patients scored between six and eight, indicating good symmetry.ConclusionsThis approach allows the size of the eventual implant to be estimated after the skin pocket has healed completely and the LD muscle has undergone natural atrophy. Optimal reconstruction results were achieved using this approach.

  15. Two-Stage Chaos Optimization Search Application in Maximum Power Point Tracking of PV Array

    Directory of Open Access Journals (Sweden)

    Lihua Wang

    2014-01-01

    Full Text Available In order to deliver the maximum available power to the load under the condition of varying solar irradiation and environment temperature, maximum power point tracking (MPPT technologies have been used widely in PV systems. Among all the MPPT schemes, the chaos method is one of the hot topics in recent years. In this paper, a novel two-stage chaos optimization method is presented which can make search faster and more effective. In the process of proposed chaos search, the improved logistic mapping with the better ergodic is used as the first carrier process. After finding the current optimal solution in a certain guarantee, the power function carrier as the secondary carrier process is used to reduce the search space of optimized variables and eventually find the maximum power point. Comparing with the traditional chaos search method, the proposed method can track the change quickly and accurately and also has better optimization results. The proposed method provides a new efficient way to track the maximum power point of PV array.

  16. Determination of selenium concentration of rice in china and effect of fertilization of selenite and selenate on selenium content of rice.

    Science.gov (United States)

    Chen, Licheng; Yang, Fangmei; Xu, Juan; Hu, Yun; Hu, Qiuhui; Zhang, Yanling; Pan, Genxing

    2002-08-28

    A method of hydride generation atomic fluorescence spectrometry was applied to the determination of the selenium concentration of regular polished rice in China and selenium-enriched polished rice obtained by foliar application of selenium-enriched fertilizer in the forms of selenite and selenate. The average selenium content of regular rice was 0.025 +/- 0.011 microg g(-)(1). On the basis of a daily dietary rice intake of 300-500 g suggested by the China Nutrition Society, the total selenium intake from regular rice was calculated to be 7.5-12.5 microg per person per day for an adult. The selenium contents of rice were significantly increased to 0.471-0.640 microg g(-)(1) by foliar application of selenium-enriched fertilizer at rate of 20 g of Se ha(-)(1) in the forms of sodium selenite and sodium selenate. The selenium content of rice by application of a fertilizer of selenate was 35.9% higher than that by a fertilizer of selenite, which showed that Se-enriched fertilizer in selenate exhibited greater efficiency in increasing Se content in rice products. The Se-enriched rice products can increase daily Se intake on average by 100-200 microg of Se per day by the consumption of 400 g of rice products if the Se level of rice products is controlled at 0.3-0.5 microg of Se g(-)(1). Because rice is a staple food in China, selenium-enriched rice obtained by bioenrichment of selenium to increase the Se content of rice could be a good selenium source for the population in selenium-deficient regions.

  17. Mineral systems and the thermodynamics of selenites and selenates in the oxidation zone of sulfide ores - a review

    Science.gov (United States)

    Charykova, Marina V.; Krivovichev, Vladimir G.

    2017-02-01

    Contemporary mineralogy and geochemistry are concerned with understanding and deciphering processes that occur near the surface of the Earth. These processes are especially important for resolving ecological challenges and developing principles of good environmental management. Selenium oxysalts, selenites and selenates, are relatively rare as minerals; there are presently only 34 known mineral species. Thirty-one "pure" selenites, which contain only selenite anionic groups, are known to occur naturally. The other three minerals each contain two anionic groups: selenate and selenite (schmiederite), selenate and sulphate (olsacherite), and selenate and iodate (carlosruizite).

  18. Train Stop Scheduling in a High-Speed Rail Network by Utilizing a Two-Stage Approach

    Directory of Open Access Journals (Sweden)

    Huiling Fu

    2012-01-01

    Full Text Available Among the most commonly used methods of scheduling train stops are practical experience and various “one-step” optimal models. These methods face problems of direct transferability and computational complexity when considering a large-scale high-speed rail (HSR network such as the one in China. This paper introduces a two-stage approach for train stop scheduling with a goal of efficiently organizing passenger traffic into a rational train stop pattern combination while retaining features of regularity, connectivity, and rapidity (RCR. Based on a three-level station classification definition, a mixed integer programming model and a train operating tactics descriptive model along with the computing algorithm are developed and presented for the two stages. A real-world numerical example is presented using the Chinese HSR network as the setting. The performance of the train stop schedule and the applicability of the proposed approach are evaluated from the perspective of maintaining RCR.

  19. Investigation of stacked elemental layers for Cu(In,Ga)Se{sub 2} thin film preparation by rapid thermal selenization

    Energy Technology Data Exchange (ETDEWEB)

    Stroth, Christiane; Ohland, Joerg; Mikolajczak, Ulf; Madena, Thomas; Keller, Jan; Parisi, Juergen; Hammer, Maria; Riedel, Ingo [Energy and Semiconductor Research Laboratory, Department of Physics, University of Oldenburg, 26111 Oldenburg (Germany)

    2013-07-01

    Rapid thermal selenization of pure metallic (Cu-In-Ga) or selenium-containing (Cu-In-Ga-Se) precursors is a favorable method to fabricate Cu(In,Ga)Se{sub 2} absorber films for application in thin film solar cells. Because of its upscaling potential and the short process time it is a promising approach for the fabrication of CIGSe photovoltaic modules on industrial scale. As a preliminary work for prospective plasma-enhanced selenization of stacked elemental layers (SEL) the elements copper, indium and gallium were sequentially deposited on molybdenum coated soda-lime glass by thermal evaporation. The stacking order was varied and the precursors were annealed with different heating rates. Morphology, elemental depth distribution and phases of the layers were investigated before and after annealing using scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction. Furthermore the influence of different heating rates on phase transitions during annealing was studied by in-situ X-ray diffraction.

  20. Morphology, structure, and properties of Cu-poor and Cu-rich Cu(In,Ga)Se2 films partially selenized using H2Se gas

    Science.gov (United States)

    Han, Anjun; Huang, Yongliang; Liu, Xiaohui; Xian, Wang; Meng, Fanying; Liu, Zhengxin

    2016-11-01

    Cu-poor and Cu-rich metallic precursors were prepared by cosputtering from In and Cu-Ga alloy targets and then partially selenized using H2Se gas. The properties of Cu(In,Ga)Se2 (CIGS) films are comparatively studied and the phase transition process is analyzed. The cosputtered metallic precursor has a rough morphology mostly covered by large In-rich nodules. After selenization, a large number of crumblike InSe grains were formed from the nodules on the surface of the Cu-rich film, whereas the Cu-poor film shows a dense surface. The selenized films comprise CIGS, Cu9(In,Ga)4 intermetallic, and the InSe phases. The proportion of the Cu9(In,Ga)4 phase in the Cu-rich film is more than that in the Cu-poor film. After annealing, the residual Cu9(In,Ga)4 of the Cu-poor film is eliminated. A negligible effect of Cu/(In+Ga) on the grain size can be observed. The CIGS solar cell with an efficiency of 15.1% was prepared by this method.

  1. DEVELOPMENT OF COLD CLIMATE HEAT PUMP USING TWO-STAGE COMPRESSION

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [ORNL; Rice, C Keith [ORNL; Abdelaziz, Omar [ORNL; Shrestha, Som S [ORNL

    2015-01-01

    This paper uses a well-regarded, hardware based heat pump system model to investigate a two-stage economizing cycle for cold climate heat pump applications. The two-stage compression cycle has two variable-speed compressors. The high stage compressor was modelled using a compressor map, and the low stage compressor was experimentally studied using calorimeter testing. A single-stage heat pump system was modelled as the baseline. The system performance predictions are compared between the two-stage and single-stage systems. Special considerations for designing a cold climate heat pump are addressed at both the system and component levels.

  2. DEVELOPMENT OF COLD CLIMATE HEAT PUMP USING TWO-STAGE COMPRESSION

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [ORNL; Rice, C Keith [ORNL; Abdelaziz, Omar [ORNL; Shrestha, Som S [ORNL

    2015-01-01

    This paper uses a well-regarded, hardware based heat pump system model to investigate a two-stage economizing cycle for cold climate heat pump applications. The two-stage compression cycle has two variable-speed compressors. The high stage compressor was modelled using a compressor map, and the low stage compressor was experimentally studied using calorimeter testing. A single-stage heat pump system was modelled as the baseline. The system performance predictions are compared between the two-stage and single-stage systems. Special considerations for designing a cold climate heat pump are addressed at both the system and component levels.

  3. Isolation and characterization of selenate resistant mutants of Acremonium chrysogenum

    Directory of Open Access Journals (Sweden)

    Airton Vialta

    1999-01-01

    Full Text Available Mutants unable to convert exogenous sulfate to sulfite were isolated using the toxic analogue selenate. Three of twenty-eight isolated mutants were chromate sensitive. They showed a possible lesion in the gene that codes the ATP sulfurylase. The others were chromate resistant, and probably had a lesion in one or both of the genes that code the sulfate permease. Methionine increased the resistance levels to selenate. In addition, the frequency of spontaneous mutants obtained in a medium containing methionine was higher (between 2.4 x 10-6 and 18.0 x 10-6 than that obtained using a medium without any intentional source of sulfur (between 0.7 x 10-6 and 5.0 x 10-6. The original strain, as well as the mutants, were able to grow in a sulfur-free liquid medium even after 4 consecutive inoculation procedures. These results indicated the existence of sulfur traces in the medium and/or an efficient intracellular storage system. There was no significant difference between cephalosporin C production in mutants and the original strain.Mutantes incapazes de converter o sulfato extracelular em sulfito foram isolados utilizando o análogo tóxico selenato. De 28 mutantes isolados, apenas 3 foram sensíveis ao cromato, provavelmente apresentando lesão no gene que codifica a ATP sulfurilase. Os demais foram resistentes ao cromato e devem conter lesão no gene sB ou também no gene sC. A metionina elevou os níveis de resistência ao selenato e a freqüência de mutantes espontâneos obtida em meio contendo este aminoácido foi maior (entre 2,42 x 10-6 e 18,04 x 10-6 do que a obtida no meio sem a adição de qualquer fonte intencional de enxofre (entre 0,71 x 10-6 e 5,0 x 10-6. A linhagem original e os mutantes foram capazes de crescer, mesmo depois de quatro etapas de inóculo, fato que pode ser explicado pela existência de traços do referido elemento no meio e/ou a presença de um sistema eficiente de estocagem intracelular. A produção de cefalosporina C

  4. A Decomposition-Based Two-Stage Optimization Algorithm for Single Machine Scheduling Problems with Deteriorating Jobs

    Directory of Open Access Journals (Sweden)

    Yueyue Liu

    2015-01-01

    Full Text Available This paper studies a production scheduling problem with deteriorating jobs, which frequently arises in contemporary manufacturing environments. The objective is to find an optimal sequence of the set of jobs to minimize the total weighted tardiness, which is an indicator of service quality. The problem belongs to the class of NP-hard. When the number of jobs increases, the computational time required by an optimization algorithm to solve the problem will increase exponentially. To tackle large-scale problems efficiently, a two-stage method is presented in this paper. We partition the set of jobs into a few subsets by applying a neural network approach and thereby transform the large-scale problem into a series of small-scale problems. Then, we employ an improved metaheuristic algorithm (called GTS which combines genetic algorithm with tabu search to find the solution for each subproblem. Finally, we integrate the obtained sequences for each subset of jobs and produce the final complete solution by enumeration. A fair comparison has been made between the two-stage method and the GTS without decomposition, and the experimental results show that the solution quality of the two-stage method is much better than that of GTS for large-scale problems.

  5. Two-stage Framework for a Topology-Based Projection and Visualization of Classified Document Collections

    Energy Technology Data Exchange (ETDEWEB)

    Oesterling, Patrick; Scheuermann, Gerik; Teresniak, Sven; Heyer, Gerhard; Koch, Steffen; Ertl, Thomas; Weber, Gunther H.

    2010-07-19

    During the last decades, electronic textual information has become the world's largest and most important information source available. People have added a variety of daily newspapers, books, scientific and governmental publications, blogs and private messages to this wellspring of endless information and knowledge. Since neither the existing nor the new information can be read in its entirety, computers are used to extract and visualize meaningful or interesting topics and documents from this huge information clutter. In this paper, we extend, improve and combine existing individual approaches into an overall framework that supports topological analysis of high dimensional document point clouds given by the well-known tf-idf document-term weighting method. We show that traditional distance-based approaches fail in very high dimensional spaces, and we describe an improved two-stage method for topology-based projections from the original high dimensional information space to both two dimensional (2-D) and three dimensional (3-D) visualizations. To show the accuracy and usability of this framework, we compare it to methods introduced recently and apply it to complex document and patent collections.

  6. AREA DETERMINATION OF DIABETIC FOOT ULCER IMAGES USING A CASCADED TWO-STAGE SVM BASED CLASSIFICATION.

    Science.gov (United States)

    Wang, Lei; Pedersen, Peder; Agu, Emmanuel; Strong, Diane; Tulu, Bengisu

    2016-11-23

    It is standard practice for clinicians and nurses to primarily assess patients' wounds via visual examination. This subjective method can be inaccurate in wound assessment and also represents a significant clinical workload. Hence, computer-based systems, especially implemented on mobile devices, can provide automatic, quantitative wound assessment and can thus be valuable for accurately monitoring wound healing status. Out of all wound assessment parameters, the measurement of the wound area is the most suitable for automated analysis. Most of the current wound boundary determination methods only process the image of the wound area along with a small amount of surrounding healthy skin. In this paper, we present a novel approach that uses Support Vector Machine (SVM) to determine the wound boundary on a foot ulcer image captured with an image capture box, which provides controlled lighting, angle and range conditions. The Simple Linear Iterative Clustering (SLIC) method is applied for effective super-pixel segmentation. A cascaded two-stage classifier is trained as follows: in the first stage a set of k binary SVM classifiers are trained and applied to different subsets of the entire training images dataset, and a set of incorrectly classified instances are collected. In the second stage, another binary SVM classifier is trained on the incorrectly classified set. We extracted various color and texture descriptors from super-pixels that are used as input for each stage in the classifier training. Specifically, we apply the color and Bag-of-Word (BoW) representation of local Dense SIFT features (DSIFT) as the descriptor for ruling out irrelevant regions (first stage), and apply color and wavelet based features as descriptors for distinguishing healthy tissue from wound regions (second stage). Finally, the detected wound boundary is refined by applying a Conditional Random Field (CRF) image processing technique. We have implemented the wound classification on a Nexus

  7. Numerical simulation of a step-piston type series two-stage pulse tube refrigerator

    Science.gov (United States)

    Zhu, Shaowei; Nogawa, Masafumi; Inoue, Tatsuo

    2007-09-01

    A two-stage pulse tube refrigerator has a great advantage in that there are no moving parts at low temperatures. The problem is low theoretical efficiency. In an ordinary two-stage pulse tube refrigerator, the expansion work of the first stage pulse tube is rather large, but is changed to heat. The theoretical efficiency is lower than that of a Stirling refrigerator. A series two-stage pulse tube refrigerator was introduced for solving this problem. The hot end of the regenerator of the second stage is connected to the hot end of the first stage pulse tube. The expansion work in the first stage pulse tube is part of the input work of the second stage, therefore the efficiency is increased. In a simulation result for a step-piston type two-stage series pulse tube refrigerator, the efficiency is increased by 13.8%.

  8. Theory and calculation of two-stage voltage stabilizer on zener diodes

    Directory of Open Access Journals (Sweden)

    G. S. Veksler

    1966-12-01

    Full Text Available Two-stage stabilizer is compared with one-stage. There have been got formulas, which give the possibility to make an engineering calculation. There is an example of the calculation.

  9. Two-stage fungal pre-treatment for improved biogas production from sisal leaf decortication residues

    National Research Council Canada - National Science Library

    Muthangya, Mutemi; Mshandete, Anthony Manoni; Kivaisi, Amelia Kajumulo

    2009-01-01

    .... Pre-treatment of the residue prior to its anaerobic digestion (AD) was investigated using a two-stage pre-treatment approach with two fungal strains, CCHT-1 and Trichoderma reesei in succession in anaerobic batch bioreactors...

  10. Experiment research on two-stage dry-fed entrained flow coal gasifier

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The process flow and the main devices of a new two-stage dry-fed coal gasification pilot plant with a throughout of 36 t/d are introduced in this paper. For comparison with the traditional one-stage gasifiers, the influences of the coal feed ratio between two stages on the performance of the gasifier are detailedly studied by a series of experiments. The results reveal that the two-stage gasification decreases the temperature of the syngas at the outlet of the gasifier, simplifies the gasification process, and reduces the size of the syngas cooler. Moreover, the cold gas efficiency of the gasifier can be improved by using the two-stage gasification. In our experiments, the efficiency is about 3%-6% higher than the existing one-stage gasifiers.

  11. A Two-Stage Waste Gasification Reactor for Mars In-Situ Resource Utilization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, build, and test a two-stage waste processing reactor for space applications. Our proposed technology converts waste from space missions into...

  12. The Production of High Purity Phycocyanin by Spirulina platensis Using Light-Emitting Diodes Based Two-Stage Cultivation.

    Science.gov (United States)

    Lee, Sang-Hyo; Lee, Ju Eun; Kim, Yoori; Lee, Seung-Yop

    2016-01-01

    Phycocyanin is a photosynthetic pigment found in photosynthetic cyanobacteria, cryptophytes, and red algae. In general, production of phycocyanin depends mainly on the light conditions during the cultivation period, and purification of phycocyanin requires expensive and complex procedures. In this study, we propose a new two-stage cultivation method to maximize the quantitative content and purity of phycocyanin obtained from Spirulina platensis using red and blue light-emitting diodes (LEDs) under different light intensities. In the first stage, Spirulina was cultured under a combination of red and blue LEDs to obtain the fast growth rate until reaching an absorbance of 1.4-1.6 at 680 nm. Next, blue LEDs were used to enhance the concentration and purity of the phycocyanin in Spirulina. Two weeks of the two-stage cultivation of Spirulina yielded 1.28 mg mL(-1) phycocyanin with the purity of 2.7 (OD620/OD280).

  13. Two stage hydrolysis of corn stover at high solids content for mixing power saving and scale-up applications.

    Science.gov (United States)

    Liu, Ke; Zhang, Jian; Bao, Jie

    2015-11-01

    A two stage hydrolysis of corn stover was designed to solve the difficulties between sufficient mixing at high solids content and high power input encountered in large scale bioreactors. The process starts with the quick liquefaction to convert solid cellulose to liquid slurry with strong mixing in small reactors, then followed the comprehensive hydrolysis to complete saccharification into fermentable sugars in large reactors without agitation apparatus. 60% of the mixing energy consumption was saved by removing the mixing apparatus in large scale vessels. Scale-up ratio was small for the first step hydrolysis reactors because of the reduced reactor volume. For large saccharification reactors in the second step, the scale-up was easy because of no mixing mechanism was involved. This two stage hydrolysis is applicable for either simple hydrolysis or combined fermentation processes. The method provided a practical process option for industrial scale biorefinery processing of lignocellulose biomass. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. A queuing-theory-based interval-fuzzy robust two-stage programming model for environmental management under uncertainty

    Science.gov (United States)

    Sun, Y.; Li, Y. P.; Huang, G. H.

    2012-06-01

    In this study, a queuing-theory-based interval-fuzzy robust two-stage programming (QB-IRTP) model is developed through introducing queuing theory into an interval-fuzzy robust two-stage (IRTP) optimization framework. The developed QB-IRTP model can not only address highly uncertain information for the lower and upper bounds of interval parameters but also be used for analysing a variety of policy scenarios that are associated with different levels of economic penalties when the promised targets are violated. Moreover, it can reflect uncertainties in queuing theory problems. The developed method has been applied to a case of long-term municipal solid waste (MSW) management planning. Interval solutions associated with different waste-generation rates, different waiting costs and different arriving rates have been obtained. They can be used for generating decision alternatives and thus help managers to identify desired MSW management policies under various economic objectives and system reliability constraints.

  15. A new multi-motor drive system based on two-stage direct power converter

    OpenAIRE

    Kumar, Dinesh

    2011-01-01

    The two-stage AC to AC direct power converter is an alternative matrix converter topology, which offers the benefits of sinusoidal input currents and output voltages, bidirectional power flow and controllable input power factor. The absence of any energy storage devices, such as electrolytic capacitors, has increased the potential lifetime of the converter. In this research work, a new multi-motor drive system based on a two-stage direct power converter has been proposed, with two motors c...

  16. Two-Stage Conversion of Land and Marine Biomass for Biogas and Biohydrogen Production

    OpenAIRE

    Nkemka, Valentine

    2012-01-01

    The replacement of fossil fuels by renewable fuels such as biogas and biohydrogen will require efficient and economically competitive process technologies together with new kinds of biomass. A two-stage system for biogas production has several advantages over the widely used one-stage continuous stirred tank reactor (CSTR). However, it has not yet been widely implemented on a large scale. Biohydrogen can be produced in the anaerobic two-stage system. It is considered to be a useful fuel for t...

  17. Bayesian and frequentist two-stage treatment strategies based on sequential failure times subject to interval censoring.

    Science.gov (United States)

    Thall, Peter F; Wooten, Leiko H; Logothetis, Christopher J; Millikan, Randall E; Tannir, Nizar M

    2007-11-20

    For many diseases, therapy involves multiple stages, with the treatment in each stage chosen adaptively based on the patient's current disease status and history of previous treatments and clinical outcomes. Physicians routinely use such multi-stage treatment strategies, also called dynamic treatment regimes or treatment policies. We present a Bayesian framework for a clinical trial comparing two-stage strategies based on the time to overall failure, defined as either second disease worsening or discontinuation of therapy. Each patient is randomized among a set of treatments at enrollment, and if disease worsening occurs the patient is then re-randomized among a set of treatments excluding the treatment received initially. The goal is to select the two-stage strategy having the largest average overall failure time. A parametric model is formulated to account for non-constant failure time hazards, regression of the second failure time on the patient's first worsening time, and the complications that the failure time in either stage may be interval censored and there may be a delay between first worsening and the start of the second stage of therapy. Four different criteria, two Bayesian and two frequentist, for selecting a best strategy are considered. The methods are applied to a trial comparing two-stage strategies for treating metastatic renal cancer, and a simulation study in the context of this trial is presented. Advantages and disadvantages of this design compared to standard methods are discussed.

  18. Two-Stage Robust Security-Constrained Unit Commitment with Optimizable Interval of Uncertain Wind Power Output

    Directory of Open Access Journals (Sweden)

    Dayan Sun

    2017-01-01

    Full Text Available Because wind power spillage is barely considered, the existing robust unit commitment cannot accurately analyze the impacts of wind power accommodation on on/off schedules and spinning reserve requirements of conventional generators and cannot consider the network security limits. In this regard, a novel double-level robust security-constrained unit commitment formulation with optimizable interval of uncertain wind power output is firstly proposed in this paper to obtain allowable interval solutions for wind power generation and provide the optimal schedules for conventional generators to cope with the uncertainty in wind power generation. The proposed double-level model is difficult to be solved because of the invalid dual transform in solution process caused by the coupling relation between the discrete and continuous variables. Therefore, a two-stage iterative solution method based on Benders Decomposition is also presented. The proposed double-level model is transformed into a single-level and two-stage robust interval unit commitment model by eliminating the coupling relation, and then this two-stage model can be solved by Benders Decomposition iteratively. Simulation studies on a modified IEEE 26-generator reliability test system connected to a wind farm are conducted to verify the effectiveness and advantages of the proposed model and solution method.

  19. Removal of cesium from simulated liquid waste with countercurrent two-stage adsorption followed by microfiltration

    Energy Technology Data Exchange (ETDEWEB)

    Han, Fei; Zhang, Guang-Hui [School of Environmental Science and Engineering, Tianjin University, Tianjin, 300072 (China); Gu, Ping, E-mail: guping@tju.edu.cn [School of Environmental Science and Engineering, Tianjin University, Tianjin, 300072 (China)

    2012-07-30

    Highlights: Black-Right-Pointing-Pointer The adsorption isotherm of cesium by copper ferrocyanide followed a Freundlich model. Black-Right-Pointing-Pointer Decontamination factor of cesium was higher in lab-scale test than that in jar test. Black-Right-Pointing-Pointer A countercurrent two-stage adsorption-microfiltration process was achieved. Black-Right-Pointing-Pointer Cesium concentration in the effluent could be calculated. Black-Right-Pointing-Pointer It is a new cesium removal process with a higher decontamination factor. - Abstract: Copper ferrocyanide (CuFC) was used as an adsorbent to remove cesium. Jar test results showed that the adsorption capacity of CuFC was better than that of potassium zinc hexacyanoferrate. Lab-scale tests were performed by an adsorption-microfiltration process, and the mean decontamination factor (DF) was 463 when the initial cesium concentration was 101.3 {mu}g/L, the dosage of CuFC was 40 mg/L and the adsorption time was 20 min. The cesium concentration in the effluent continuously decreased with the operation time, which indicated that the used adsorbent retained its adsorption capacity. To use this capacity, experiments on a countercurrent two-stage adsorption (CTA)-microfiltration (MF) process were carried out with CuFC adsorption combined with membrane separation. A calculation method for determining the cesium concentration in the effluent was given, and batch tests in a pressure cup were performed to verify the calculated method. The results showed that the experimental values fitted well with the calculated values in the CTA-MF process. The mean DF was 1123 when the dilution factor was 0.4, the initial cesium concentration was 98.75 {mu}g/L and the dosage of CuFC and adsorption time were the same as those used in the lab-scale test. The DF obtained by CTA-MF process was more than three times higher than the single-stage adsorption in the jar test.

  20. Two-stage induced differentiation of OCT4+/Nanog+ stem-like cells in lung adenocarcinoma.

    Science.gov (United States)

    Li, Rong; Huang, Jinsu; Ma, Meili; Lou, Yuqing; Zhang, Yanwei; Wu, Lixia; Chang, David W; Zhao, Picheng; Dong, Qianggang; Wu, Xifeng; Han, Baohui

    2016-10-18

    Stem-like cells in solid tumors are purported to contribute to cancer development and poor treatment outcome. The abilities to self-renew, differentiate, and resist anticancer therapies are hallmarks of these rare cells, and steering them into lineage commitment may be one strategy to curb cancer development or progression. Vitamin D is a prohormone that can alter cell growth and differentiation and may induce the differentiation cancer stem-like cells. In this study, octamer-binding transcription factor 4 (OCT4)-positive/Nanog homeobox (Nanog)- positive lung adenocarcinoma stem-like cells (LACSCs) were enriched from spheroid cultured SPC-A1 cells and differentiated by a two-stage induction (TSI) method, which involved knockdown of hypoxia-inducible factor 1-alpha (HIF1α) expression (first stage) followed by sequential induction with 1alpha,25-dihydroxyvitamin D3 (1,25(OH)2D3, VD3) and suberoylanilide hydroxamic acid (SAHA) treatment (second stage). The results showed the HIF1α-knockdowned cells displayed diminished cell invasion and clonogenic activities. Moreover, the TSI cells highly expressed tumor suppressor protein p63 (P63) and forkhead box J1 (FOXJ1) and lost stem cell characteristics, including absent expression of OCT4 and Nanog. These cells regained sensitivity to cisplatin in vitro while losing tumorigenic capacity and decreased tumor cell proliferation in vivo. Our results suggest that induced transdifferentiation of LACSCs by vitamin D and SAHA may become novel therapeutic avenue to alter tumor cell phenotypes and improve patient outcome.The development and progression of lung cancer may involve rare population of stem-like cells that have the ability to grow, differentiate, and resist drug treatment. However, current therapeutic strategies have mostly focused on tumor characteristics and neglected the potential source of cells that may contribute to poor clinical outcome. We generated lung adenocarcinoma stem-like cells from spheroid culture and

  1. Two-stage light-gas magnetoplasma accelerator for hypervelocity impact simulation

    Science.gov (United States)

    Khramtsov, P. P.; Vasetskij, V. A.; Makhnach, A. I.; Grishenko, V. M.; Chernik, M. Yu; Shikh, I. A.; Doroshko, M. V.

    2016-11-01

    The development of macroparticles acceleration methods for high-speed impact simulation in a laboratory is an actual problem due to increasing of space flights duration and necessity of providing adequate spacecraft protection against micrometeoroid and space debris impacts. This paper presents results of experimental study of a two-stage light- gas magnetoplasma launcher for acceleration of a macroparticle, in which a coaxial plasma accelerator creates a shock wave in a high-pressure channel filled with light gas. Graphite and steel spheres with diameter of 2.5-4 mm were used as a projectile and were accelerated to the speed of 0.8-4.8 km/s. A launching of particle occurred in vacuum. For projectile velocity control the speed measuring method was developed. The error of this metod does not exceed 5%. The process of projectile flight from the barrel and the process of a particle collision with a target were registered by use of high-speed camera. The results of projectile collision with elements of meteoroid shielding are presented. In order to increase the projectile velocity, the high-pressure channel should be filled with hydrogen. However, we used helium in our experiments for safety reasons. Therefore, we can expect that the range of mass and velocity of the accelerated particles can be extended by use of hydrogen as an accelerating gas.

  2. Stepwise encapsulation and controlled two-stage release system for cis-Diamminediiodoplatinum

    Directory of Open Access Journals (Sweden)

    Chen Y

    2014-06-01

    Full Text Available Yun Chen,1,* Qian Li,1,2,* Qingsheng Wu1 1Department of Chemistry, Key Laboratory of Yangtze River Water Environment, Ministry of Education, Tongji University, Shanghai; 2Shanghai Institute of Quality Inspection and Technical Research, Shanghai, People’s Republic of China *These authors contributed equally to this work Abstract: cis-Diamminediiodoplatinum (cis-DIDP is a cisplatin-like anticancer drug with higher anticancer activity, but lower stability and price than cisplatin. In this study, a cis-DIDP carrier system based on micro-sized stearic acid was prepared by an emulsion solvent evaporation method. The maximum drug loading capacity of cis-DIDP-loaded solid lipid nanoparticles was 22.03%, and their encapsulation efficiency was 97.24%. In vitro drug release in phosphate-buffered saline (pH =7.4 at 37.5°C exhibited a unique two-stage process, which could prove beneficial for patients with tumors and malignancies. MTT (3-[4,5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide assay results showed that cis-DIDP released from cis-DIDP-loaded solid lipid nanoparticles had better inhibition activity than cis-DIDP that had not been loaded. Keywords: stearic acid, emulsion solvent evaporation method, drug delivery, cis-DIDP, in vitro

  3. An Adaptive Two-Stage BPNN–DCT Image Compression Technique

    Directory of Open Access Journals (Sweden)

    Dr. Tarun Kumar

    2014-05-01

    Full Text Available Neural Networks offer the potential for providing a novel solution to the problem of data compression by its ability to generate an internal data representation. This network, which is an application of back propagation network, accepts a large amount of image data, compresses it for storage or transmission, and subsequently restores it when desired. A new approach for reducing training time by reconstructing representative vectors has also been proposed. Performance of the network has been evaluated using some standard real world images. Neural networks can be trained to represent certain sets of data. After decomposing an image using the Discrete Cosine Transform (DCT, a two stage neural network may be able to represent the DCT coefficients in less space than the coefficients themselves. After splitting the image and the decomposition using several methods, neural networks were trained to represent the image blocks. By saving the weights and bias of each neuron, by using the Inverse DCT (IDCT coefficient mechanism an image segment can be approximately recreated. Compression can be achieved using neural networks. Current results have been promising except for the amount of time needed to train a neural network. One method of speeding up code execution is discussed. However, plenty of future research work is available in this area it is shown that the development architecture and training algorithm provide high compression ratio and low distortion while maintaining the ability to generalize and is very robust as well

  4. Teratogenic effect of cisplatin in rats and the protective role of sodium selenate.

    Science.gov (United States)

    Hassan, Mohammed S; Morgan, Ashraf M; Mekawy, Mohey M; Zaki, Amr R; Ghazi, Zeinab M

    2016-05-01

    Eighty pregnant Sprague-Dawley rats were used in this study. They were allotted to four equal groups. The first group served as a control without any treatment while the other groups were given cisplatin, sodium selenate, and cisplatin+sodium selenate, respectively. Cisplatin was injected intraperitoneally in a dose of 5mg/kgb wt. on the 12th day of gestation while sodium selenate was administered orally in a dose of 0.5mg/kgb wt throughout gestation. Animals were sacrificed on the 20th day of gestation for fetal examination. Cisplatin produced significant elevation in the percentages of late resorption sites and dead foetuses compared with the control group. The mean foetal and placental weights were significantly reduced. Dwarf foetuses and subcutaneous (s/c) haemorrhage were also recorded in cisplatin-treated group. Visceral abnormalities were revealed in the form of dilated nares, anophthalmia and/or microphthalmia, dilated brain ventricles, hypertrophy of the heart, hypoplasia of the lung, hepatomegaly and dilated renal pelvis. Skeletal examination showed wide open fontanel, incomplete ossification of parietal and interparietal bones, incomplete ossification of sternum, reduction in the number or even complete absence of phalanges, sacral and/or caudal vertebrae. Histopathological examination of placentas in cisplatin-treated group revealed severe pathological alterations. Administration of sodium selenate significantly alleviated the afore-mentioned adverse effects of cisplatin on the fetuses and their placentas so we conclude that sodium selenate as an antioxidant has an effective protective role in cisplatin teratogenic effects.

  5. Influence of bulking agents on physical, chemical, and microbiological properties during the two-stage composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2016-02-01

    A recyclable organic bulking agent (BA) that can be screened and was developed to optimize green waste (GW) composting. This study investigated the use of wood chips (WC) (at 0%, 15%, and 25%) and/or composted green waste (CGW) (at 0%, 25%, and 35%) as the BAs in the two-stage composting of GW. The combined addition of WC and CGW improved the conditions of composting process and the quality of compost product in terms of composting temperature, porosity, water retention, particle-size distribution, pH, electrical conductivity (EC), cation exchange capacity (CEC), nitrogen losses, humification indices, microbial numbers, enzyme activities, macro- and micro-nutrient contents, and toxicity to germinating seeds. The compost matured in only 22days with the optimized two-stage composting method rather than in the 90-270days typically required for traditional composting. The optimal two-stage composting process and the best quality of compost product were obtained with the combined addition of 15% WC and 35% CGW.

  6. Assessing vanadium and arsenic exposure of people living near a petrochemical complex with two-stage dispersion models

    Energy Technology Data Exchange (ETDEWEB)

    Chio, Chia-Pin; Yuan, Tzu-Hsuen [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Shie, Ruei-Hao [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China); Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu, Taiwan (China); Chan, Chang-Chuan, E-mail: ccchan@ntu.edu.tw [Institute of Occupational Medicine and Industrial Hygiene, College of Public Health, National Taiwan University, Taipei, Taiwan (China)

    2014-04-01

    Highlights: • Two-stage dispersion models can estimate exposures to hazardous air pollutants. • Spatial distribution of V levels is derived for sources without known emission rates. • A distance-to-source gradient is found for V levels from a petrochemical complex. • Two-stage dispersion is useful for modeling air pollution in resource-limited areas. - Abstract: The goal of this study is to demonstrate that it is possible to construct a two-stage dispersion model empirically for the purpose of estimating air pollution levels in the vicinity of petrochemical plants. We studied oil refineries and coal-fired power plants in the No. 6 Naphtha Cracking Complex, an area of 2,603-ha situated on the central west coast of Taiwan. The pollutants targeted were vanadium (V) from oil refineries and arsenic (As) from coal-fired power plants. We applied a backward fitting method to determine emission rates of V and As, with 192 PM{sub 10} filters originally collected between 2009 and 2012. Our first-stage model estimated emission rates of V and As (median and 95% confidence intervals at 0.0202 (0.0040–0.1063) and 0.1368 (0.0398–0.4782) g/s, respectively. In our second stage model, the predicted zone-average concentrations showed a strong correlation with V, but a poor correlation with As. Our findings show that two-stage dispersion models are relatively precise for estimating V levels at residents’ addresses near the petrochemical complex, but they did not work as well for As levels. In conclusion, our model-based approach can be widely used for modeling exposure to air pollution from industrial areas in countries with limited resources.

  7. A Two-Stage Queue Model to Optimize Layout of Urban Drainage System considering Extreme Rainstorms

    Directory of Open Access Journals (Sweden)

    Xinhua He

    2017-01-01

    Full Text Available Extreme rainstorm is a main factor to cause urban floods when urban drainage system cannot discharge stormwater successfully. This paper investigates distribution feature of rainstorms and draining process of urban drainage systems and uses a two-stage single-counter queue method M/M/1→M/D/1 to model urban drainage system. The model emphasizes randomness of extreme rainstorms, fuzziness of draining process, and construction and operation cost of drainage system. Its two objectives are total cost of construction and operation and overall sojourn time of stormwater. An improved genetic algorithm is redesigned to solve this complex nondeterministic problem, which incorporates with stochastic and fuzzy characteristics in whole drainage process. A numerical example in Shanghai illustrates how to implement the model, and comparisons with alternative algorithms show its performance in computational flexibility and efficiency. Discussions on sensitivity of four main parameters, that is, quantity of pump stations, drainage pipe diameter, rainstorm precipitation intensity, and confidence levels, are also presented to provide guidance for designing urban drainage system.

  8. An Enhanced Two-Stage Impulse Noise Removal Technique based on Fast ANFIS and Fuzzy Decision

    Directory of Open Access Journals (Sweden)

    V. Saradhadevi

    2011-09-01

    Full Text Available Image enhancement plays a vital role in various applications. There are many techniques to remove the noise from the image and produce the clear visual of the image. Moreover, there are several filters and image smoothing techniques available in the literature. All these available techniques have certain limitations. Recently, neural networks are found to be a very efficient tool for image enhancement. A novel two-stage noise removal technique for image enhancement and noise removal is proposed in this paper. In noise removal stage, Adaptive Neuro-Fuzzy Inference System (ANFIS with a Modified Levenberg-Marquardt training algorithm was used to eliminate the impulse noise. The usage of Modified Levenberg-Marquardt training algorithm will reduce the execution time. In the image enhancement stage, the fuzzy decision rules inspired by the Human Visual System (HVS are used to categorize the image pixels into human perception sensitive class and nonsensitive class, and to enhance the quality of the image. The Hyper trapezoidal fuzzy membership function is used in the proposed technique. In order to improve the sensitive regions with higher visual quality, a Neural Network (NN is proposed. The experiment is conducted with standard image. It is observed from the experimental result that the proposed FANFIS shows significant performance when compared to existing methods.

  9. Two-stage Hydrolysis of Invasive Algal Feedstock for Ethanol Fermentation

    Institute of Scientific and Technical Information of China (English)

    Xin Wang; Xianhua Liu; Guangyi Wang

    2011-01-01

    The overall goal of this work was to develop a saccharification method for the production of third generation biofuel(i.e.bioethanol) using feedstock of the invasive marine macroalga Gracilaria salicornia.Under optimum conditions(120℃ and 2% sulfuric acid for 30 min), dilute acid hydrolysis of the homogenized invasive plants yielded a low concentration of glucose(4.1mM or 4.3g glucose/kg fresh algal biomass). However, two-stage hydrolysis of the homogenates (combination of dilute acid hydrolysis with enzymatic hydrolysis) produced 13.8g of glucose from one kilogram of fresh algal feedstock. Batch fermentation analysis produced 79.1g EtOH from one kilogram of dried invasive algal feedstock using the ethanologenic strain Escherichia coli K011. Furthermore, ethanol production kinetics indicated that the invasive algal feedstock contained different types of sugar, including C5-sugar. This study represents the first report on third generation biofuel production from invasive macroalgae, suggesting that there is great potential for the production of renewable energy using marine invasive biomass.

  10. A New Two-Stage Approach to Short Term Electrical Load Forecasting

    Directory of Open Access Journals (Sweden)

    Dragan Tasić

    2013-04-01

    Full Text Available In the deregulated energy market, the accuracy of load forecasting has a significant effect on the planning and operational decision making of utility companies. Electric load is a random non-stationary process influenced by a number of factors which make it difficult to model. To achieve better forecasting accuracy, a wide variety of models have been proposed. These models are based on different mathematical methods and offer different features. This paper presents a new two-stage approach for short-term electrical load forecasting based on least-squares support vector machines. With the aim of improving forecasting accuracy, one more feature was added to the model feature set, the next day average load demand. As this feature is unknown for one day ahead, in the first stage, forecasting of the next day average load demand is done and then used in the model in the second stage for next day hourly load forecasting. The effectiveness of the presented model is shown on the real data of the ISO New England electricity market. The obtained results confirm the validity advantage of the proposed approach.

  11. Food behavior change in late-life widowhood: A two-stage process.

    Science.gov (United States)

    Vesnaver, Elisabeth; Keller, Heather H; Sutherland, Olga; Maitland, Scott B; Locher, J L

    2015-12-01

    Widowhood is a common life event for married older women. Prior research has found disruptions in eating behaviors to be common among widows. Little is known about the process underlying these disruptions. The aim of this study was to generate a theoretical understanding of the changing food behaviors of older women during the transition of widowhood. Qualitative methods based on constructivist grounded theory guided by a critical realist worldview were used. Individual active interviews were conducted with 15 community-living women, aged 71-86 years, living alone, and widowed six months to 15 years at the time of the interview. Participants described a variety of educational backgrounds and levels of health, were mainly white and of Canadian or European descent, and reported sufficient income to meet their needs. The loss of regular shared meals initiated a two-stage process whereby women first fall into new patterns and then re-establish the personal food system, thus enabling women to redirect their food system from one that satisfied the couple to one that satisfied their personal food needs. Influences on the trajectory of the change process included the couple's food system, experience with nutritional care, food-related values, and food-related resources. Implications for research and practice are discussed.

  12. A Novel Two-Stage Illumination Estimation Framework for Expression Recognition

    Directory of Open Access Journals (Sweden)

    Zheng Zhang

    2014-01-01

    Full Text Available One of the critical issues for facial expression recognition is to eliminate the negative effect caused by variant poses and illuminations. In this paper a two-stage illumination estimation framework is proposed based on three-dimensional representative face and clustering, which can estimate illumination directions under a series of poses. First, 256 training 3D face models are adaptively categorized into a certain amount of facial structure types by k-means clustering to group people with similar facial appearance into clusters. Then the representative face of each cluster is generated to represent the facial appearance type of that cluster. Our training set is obtained by rotating all representative faces to a certain pose, illuminating them with a series of different illumination conditions, and then projecting them into two-dimensional images. Finally the saltire-over-cross feature is selected to train a group of SVM classifiers and satisfactory performance is achieved when estimating a number of test sets including images generated from 64 3D face models kept for testing, CAS-PEAL face database, CMU PIE database, and a small test set created by ourselves. Compared with other related works, our method is subject independent and has less computational complexity O(C×N without 3D facial reconstruction.

  13. A two-stage approach to the depot shunting driver assignment problem with workload balance considerations

    Science.gov (United States)

    Gronalt, Manfred; Sun, Yan

    2017-01-01

    Due to its environmentally sustainable and energy-saving characteristics, railway transportation nowadays plays a fundamental role in delivering passengers and goods. Emerged in the area of transportation planning, the crew (workforce) sizing problem and the crew scheduling problem have been attached great importance by the railway industry and the scientific community. In this paper, we aim to solve the two problems by proposing a novel two-stage optimization approach in the context of the electric multiple units (EMU) depot shunting driver assignment problem. Given a predefined depot shunting schedule, the first stage of the approach focuses on determining an optimal size of shunting drivers. While the second stage is formulated as a bi-objective optimization model, in which we comprehensively consider the objectives of minimizing the total walking distance and maximizing the workload balance. Then we combine the normalized normal constraint method with a modified Pareto filter algorithm to obtain Pareto solutions for the bi-objective optimization problem. Furthermore, we conduct a series of numerical experiments to demonstrate the proposed approach. Based on the computational results, the regression analysis yield a driver size predictor and the sensitivity analysis give some interesting insights that are useful for decision makers. PMID:28704489

  14. A Two-Stage Relational Reinforcement Learning with Continuous Actions for Real Service Robots

    Science.gov (United States)

    Zaragoza, Julio H.; Morales, Eduardo F.

    Reinforcement Learning is a commonly used technique in robotics, however, traditional algorithms are unable to handle large amounts of data coming from the robot’s sensors, require long training times, are unable to re-use learned policies on similar domains, and use discrete actions. This work introduces TS-RRLCA, a two stage method to tackle these problems. In the first stage, low-level data coming from the robot’s sensors is transformed into a more natural, relational representation based on rooms, walls, corners, doors and obstacles, significantly reducing the state space. We also use Behavioural Cloning, i.e., traces provided by the user to learn, in few iterations, a relational policy that can be re-used in different environments. In the second stage, we use Locally Weighted Regression to transform the initial policy into a continuous actions policy. We tested our approach with a real service robot on different environments for different navigation and following tasks. Results show how the policies can be used on different domains and perform smoother, faster and shorter paths than the original policies.

  15. Two-stage case-control association study of dopamine-related genes and migraine

    Directory of Open Access Journals (Sweden)

    Pardo Julio

    2009-09-01

    Full Text Available Abstract Background We previously reported risk haplotypes for two genes related with serotonin and dopamine metabolism: MAOA in migraine without aura and DDC in migraine with aura. Herein we investigate the contribution to migraine susceptibility of eight additional genes involved in dopamine neurotransmission. Methods We performed a two-stage case-control association study of 50 tag single nucleotide polymorphisms (SNPs, selected according to genetic coverage parameters. The first analysis consisted of 263 patients and 274 controls and the replication study was composed by 259 cases and 287 controls. All cases were diagnosed according to ICHD-II criteria, were Spanish Caucasian, and were sex-matched with control subjects. Results Single-marker analysis of the first population identified nominal associations of five genes with migraine. After applying a false discovery rate correction of 10%, the differences remained significant only for DRD2 (rs2283265 and TH (rs2070762. Multiple-marker analysis identified a five-marker T-C-G-C-G (rs12363125-rs2283265-rs2242592-rs1554929-rs2234689 risk haplotype in DRD2 and a two-marker A-C (rs6356-rs2070762 risk haplotype in TH that remained significant after correction by permutations. These results, however, were not replicated in the second independent cohort. Conclusion The present study does not support the involvement of the DRD1, DRD2, DRD3, DRD5, DBH, COMT, SLC6A3 and TH genes in the genetic predisposition to migraine in the Spanish population.

  16. A two-stage visual tracking algorithm using dual-template

    Directory of Open Access Journals (Sweden)

    Yu Xia

    2016-10-01

    Full Text Available Template matching and updates are crucial steps in visual object tracking. In this article, we propose a two-stage object tracking algorithm using a dual-template. By design, the initial state of a target can be estimated using a prior fixed template at the first stage with a particle-filter-based tracking framework. The use of prior templates maintains the stability of an object tracking algorithm, because it consists of invariant and important features. In the second step, a mean shift is used to gain the optimal location of the object with the stage update template. The stage template improves the ability of target recognition using a classified update method. The complementary of dual-template improves the quality of template matching and the performance of object tracking. Experimental results demonstrate that the proposed algorithm improves the tracking performance in terms of accuracy and robustness, and it exhibits good results in the presence of deformation, noise and occlusion.

  17. Predictive Modeling of a Two-Stage Gearbox towards Fault Detection

    Directory of Open Access Journals (Sweden)

    Edward J. Diehl

    2016-01-01

    Full Text Available This paper presents a systematic approach to the modeling and analysis of a benchmark two-stage gearbox test bed to characterize gear fault signatures when processed with harmonic wavelet transform (HWT analysis. The eventual goal of condition monitoring is to be able to interpret vibration signals from nonstationary machinery in order to identify the type and severity of gear damage. To advance towards this goal, a lumped-parameter model that can be analyzed efficiently is developed which characterizes the gearbox vibratory response at the system level. The model parameters are identified through correlated numerical and experimental investigations. The model fidelity is validated first by spectrum analysis, using constant speed experimental data, and secondly by HWT analysis, using nonstationary experimental data. Model prediction and experimental data are compared for healthy gear operation and a seeded fault gear with a missing tooth. The comparison confirms that both the frequency content and the predicted, relative response magnitudes match with physical measurements. The research demonstrates that the modeling method in combination with the HWT data analysis has the potential for facilitating successful fault detection and diagnosis for gearbox systems.

  18. Treatment of Ammonia Nitrogen Wastewater in Low Concentration by Two-Stage Ozonization

    Science.gov (United States)

    Luo, Xianping; Yan, Qun; Wang, Chunying; Luo, Caigui; Zhou, Nana; Jian, Chensheng

    2015-01-01

    Ammonia nitrogen wastewater (about 100 mg/L) was treated by two-stage ozone oxidation method. The effects of ozone flow rate and initial pH on ammonia removal were studied, and the mechanism of ammonia nitrogen removal by ozone oxidation was discussed. After the primary stage of ozone oxidation, the ammonia removal efficiency reached 59.32% and pH decreased to 6.63 under conditions of 1 L/min ozone flow rate and initial pH 11. Then, the removal efficiency could be over 85% (the left ammonia concentration was lower than 15 mg/L) after the second stage, which means the wastewater could have met the national discharge standards of China. Besides, the mechanism of ammonia removal by ozone oxidation was proposed by detecting the products of the oxidation: ozone oxidation directly and ·OH oxidation; ammonia was mainly transformed into NO3−-N, less into NO2−-N, not into N2. PMID:26404353

  19. Two-stage re-estimation adaptive design: a simulation study

    Directory of Open Access Journals (Sweden)

    Francesca Galli

    2013-10-01

    Full Text Available Background: adaptive clinical trial design has been proposed as a promising new approach to improve the drug discovery process. Among the many options available, adaptive sample size re-estimation is of great interest mainly because of its ability to avoid a large ‘up-front’ commitment of resources. In this simulation study, we investigate the statistical properties of two-stage sample size re-estimation designs in terms of type I error control, study power and sample size, in comparison with the fixed-sample study.Methods: we simulated a balanced two-arm trial aimed at comparing two means of normally distributed data, using the inverse normal method to combine the results of each stage, and considering scenarios jointly defined by the following factors: the sample size re-estimation method, the information fraction, the type of group sequential boundaries and the use of futility stopping. Calculations were performed using the statistical software SAS™ (version 9.2.Results: under the null hypothesis, any type of adaptive design considered maintained the prefixed type I error rate, but futility stopping was required to avoid the unwanted increase in sample size. When deviating from the null hypothesis, the gain in power usually achieved with the adaptive design and its performance in terms of sample size were influenced by the specific design options considered.Conclusions: we show that adaptive designs incorporating futility stopping, a sufficiently high information fraction (50-70% and the conditional power method for sample size re-estimation have good statistical properties, which include a gain in power when trial results are less favourable than anticipated. 

  20. Fabrication of CIGS thin films by using spray pyrolysis and post-selenization

    Science.gov (United States)

    Kim, Seong Yeon; Kim, JunHo

    2012-06-01

    We fabricated Cu(In1- x Ga x )Se2 ( x: 0 ˜ 0.4) thin films by using ultrasonic spray pyrolysis and post-selenization. First, we made Cu(In1- x Ga x )S2 ( x: 0 ˜ 0.4) films by ultrasonic spray pyrolysis under an air environment. Then, we converted as-sprayed Cu(In1- x Ga x )S2 (CIGS) films to Cu-(In1- x Ga x )Se2 (CIGSe) films through post-selenization. For all Ga fractions, the sprayed CIGS films were well recrystallized into poly-crystalline CIGSe films with a dominant (112) texture, which was confirmed by X-ray diffraction, Raman spectroscopy and energy dispersive X-ray analyses. This result indicates that CIGSe films with any amount of Ga substitution can be made by converting sprayed CIGS to CIGSe with post-selenization.

  1. High magnetostriction parameters for low-temperature sintered cobalt ferrite obtained by two-stage sintering

    Energy Technology Data Exchange (ETDEWEB)

    Khaja Mohaideen, K.; Joy, P.A., E-mail: pa.joy@ncl.res.in

    2014-12-15

    From the studies on the magnetostriction characteristics of two-stage sintered polycrystalline CoFe{sub 2}O{sub 4} made from nanocrystalline powders, it is found that two-stage sintering at low temperatures is very effective for enhancing the density and for attaining higher magnetostriction coefficient. Magnetostriction coefficient and strain derivative are further enhanced by magnetic field annealing and relatively larger enhancement in the magnetostriction parameters is obtained for the samples sintered at lower temperatures, after magnetic annealing, despite the fact that samples sintered at higher temperatures show larger magnetostriction coefficients before annealing. A high magnetostriction coefficient of ∼380 ppm is obtained after field annealing for the sample sintered at 1100 °C, below a magnetic field of 400 kA/m, which is the highest value so far reported at low magnetic fields for sintered polycrystalline cobalt ferrite. - Highlights: • Effect of two-stage sintering on the magnetostriction characteristics of CoFe{sub 2}O{sub 4} is studied. • Two-stage sintering is very effective for enhancing the density and the magnetostriction parameters. • Higher magnetostriction for samples sintered at low temperatures and after magnetic field annealing. • Highest reported magnetostriction of 380 ppm at low fields after two-stage, low-temperature sintering.

  2. 13 K thermally coupled two-stage Stirling-type pulse tube refrigerator

    Institute of Scientific and Technical Information of China (English)

    TANG Ke; CHEN Guobang; THUMMES Günter

    2005-01-01

    Stirling-type pulse tube refrigerators have attracted academic and commercial interest in recent years due to their more compact configuration and higher efficiency than those of G-M type pulse tube refrigerators. In order to achieve a no-load cooling temperature below 20 K, a thermally coupled two-stage Stirling-type pulse tube refrigerator has been built. The thermally coupled arrangement was expected to minimize the interference between the two stages and to simplify the adjustment and optimization of the phase shifters. A no-load cooling temperature of 14.97 K has been realized with the two-stage cooler driven by one linear compressor of 200 W electric input. When the two stages are driven by two compressors respectively, with total electric input of 400 W, the prototype has attained a no-load cooling temperature of 12.96 K, which is the lowest temperature ever reported with two-stage Stirling-type pulse tube refrigerators.

  3. Effects of Foliar-applied Selenite and Selenate on Selenium Accumulation in Strawberry

    Directory of Open Access Journals (Sweden)

    Author Name\tAffiliation\tE-mail WANG Xiao-fang

    2016-07-01

    Full Text Available The effects of foliar spray of selenite or selenate on selenium(Se accumulation, distribution in strawberry were observed in this study. Solutions of sodium selenite or sodium selenate were sprayed on the leaves of strawberry at the early stage of flowering. The results showed that foliar spay of both selenite and selenate significantly increased Se contents in strawberry fruits(P<0.05. The first batch of strawberry fruits contained 0.03, 0.10 and 0.15 mg Se·kg-1 fresh weight(FW at application rates of 20,40 and 60 g Se·hm-2 as selenite respectively, representing 3, 20 and 30 times of that under control. When applied with the same doses of selenate, contents of Se in the first batch of strawberry fruits were 0.05, 0.12, 0.17 mg Se·kg-1 FW, as much as 5, 24 and 34 times of that under control. However, foliar spray couldn't ensure long-term sustainability as Se contents in strawberry fruits decreased significantly in the following two batches. Four months after foliar spray, more than 30% of Se was translocated from leaves into roots of plants sprayed with selenite, while only less than 15% of Se was transported to roots when applied with selenate. The results demonstrated that foliar spray of Se significantly increased the Se concentration at the first stage and Se concentration decreased with the growing of strawberry. Sprayed selenite was more readily translocated from leaf to root than selenate.

  4. Phytochelatin induction by selenate in Chlorella vulgaris, and regulation of effect by sulfate levels.

    Science.gov (United States)

    Simmons, Denina B D; Emery, R J Neil

    2011-02-01

    Phytochelatins (PCs) are short metal detoxification peptides made from the sulfur-rich molecule glutathione. The production of PCs by algae caused by Se exposure has never been studied, although many algae accumulate Se, forming Se-rich proteins and peptides, and higher plants have demonstrated PC production when treated with Se; therefore, a goal of the current study was to examine whether Se induces PC production in algae. Furthermore, selenate is thought to compete with sulfate in the S assimilation pathway, and sulfate therefore may have a protective effect against the toxic effects of high doses of Se in algae. Hence, the interaction of selenate and sulfate was investigated with respect to the induction of PCs. Chlorella vulgaris was cultured in media with either low (31.2 µM) or high (312 µM) concentrations of sulfate. These cultures were exposed to selenate in doses of 7, 35, and 70 nM for 48 h. In a separate treatment, Cd (890 nM) was added as a positive PC-inducing control, and one no-metal negative control was used. Total Se and Se speciation were determined, and glutathione, phytochelatin-2, and phytochelatin-3 were quantified in each of cell digests, cell medium, and cell lysates. We found that PCs and their precursor glutathione were induced by selenate as well as by a Cd control. The high concentration of sulfate was able to counter selenate-induced production of PCs and glutathione. These data support two possible mechanisms: a negative feedback system in the S assimilation pathway that affects PC production when sulfate is abundant, and competition for uptake at the ion transport level between selenate and sulfate.

  5. Simultaneous reduction of nitrate and selenate by cell suspensions of selenium-respiring bacteria

    Science.gov (United States)

    Oremland, R.S.; Blum, J.S.; Bindi, A.B.; Dowdle, P.R.; Herbel, M.; Stolz, J.F.

    1999-01-01

    Washed-cell suspensions of Sulfurospirillum barnesii reduced selenate [Se(VI)] when cells were cultured with nitrate, thiosulfate, arsenate, or fumarate as the electron acceptor. When the concentration of the electron donor was limiting, Se(VI) reduction in whole cells was approximately fourfold greater in Se(VI)-grown cells than was observed in nitrate-grown cells; correspondingly, nitrate reduction was ~11-fold higher in nitrate-grown cells than in Se(VI)-grown cells. However, a simultaneous reduction of nitrate and Se(VI) was observed in both cases. At nonlimiting electron donor concentrations, nitrate- grown cells suspended with equimolar nitrate and selenate achieved a complete reductive removal of nitrogen and selenium oxyanions, with the bulk of nitrate reduction preceding that of selenate reduction. Chloramphenicol did not inhibit these reductions. The Se(VI)-respiring haloalkaliphile Bacillus arsenicoselenatis gave similar results, but its Se(VI) reductase was not constitutive in nitrate-grown cells. No reduction of Se(VI) was noted for Bacillus selenitireducens, which respires selenite. The results of kinetic experiments with cell membrane preparations of S. barnesii suggest the presence of constitutive selenate and nitrate reduction, as well as an inducible, high- affinity nitrate reductase in nitrate-grown cells which also has a low affinity for selenate. The simultaneous reduction of micromolar Se(VI) in the presence of millimolar nitrate indicates that these organisms may have a functional use in bioremediating nitrate-rich, seleniferous agricultural wastewaters. Results with 75Se-selenate tracer show that these organisms can lower ambient Se(VI) concentrations to levels in compliance with new regulations proposed for release of selenium oxyanions into the environment.

  6. Effect of intermittent supplementation with selenate on selenium status of rats fed selenium-deficient diet.

    Science.gov (United States)

    Sugihara, Satoru; Fukunaga, Kenji; Nishiyama, Toshimasa; Yoshida, Munehiro

    2005-12-01

    To examine the selenium (Se) status of rats intermittently supplemented with Se, we measured tissue Se contents and glutathione peroxidase (GPx) activities in rats fed a Se-deficient diet intermittently supplemented with selenate. In experiment 1, four groups of male 4-wk-old Wistar rats were fed a Torula yeast-based Se-deficient diet (Se content, diet of each group was supplemented with sodium selenate (0.17 microg Se/g) for 0, 1, 2 or 7 d/wk. The tissue Se contents and GPx activities both increased gradually with an increase in frequency of the selenate supplementation, and significant linear regressions were observed between the frequency and these Se indices. In particular, the correlation coefficient in the liver and plasma indices was nearly equal to a value of 1.0. In experiment 2, three groups of rats were fed the Se-deficient basal diet for 28 d. Among these, one group was daily supplemented with sodium selenate to the Se-deficient diet at a level of 0.17 microg Se/g, and another group was intermittently supplemented with the selenate at a level of 1.19 microg Se/g for 1 d/wk. The tissue Se contents and GPx activities both were increased by the selenate supplementation and no significant difference was observed between daily and weekly supplementation in the Se indices except in erythrocyte Se. These results indicate that Se status in the growth period is dependent on total Se intake in this period and that weekly intermittent supplementation with Se can maintain adequate Se status.

  7. Design and construction of the X-2 two-stage free piston driven expansion tube

    Science.gov (United States)

    Doolan, Con

    1995-01-01

    This report outlines the design and construction of the X-2 two-stage free piston driven expansion tube. The project has completed its construction phase and the facility has been installed in the new impulsive research laboratory where commissioning is about to take place. The X-2 uses a unique, two-stage driver design which allows a more compact and lower overall cost free piston compressor. The new facility has been constructed in order to examine the performance envelope of the two-stage driver and how well it couple to sub-orbital and super-orbital expansion tubes. Data obtained from these experiments will be used for the design of a much larger facility, X-3, utilizing the same free piston driver concept.

  8. Analysis of performance and optimum configuration of two-stage semiconductor thermoelectric module

    Institute of Scientific and Technical Information of China (English)

    Li Kai-Zhen; Liang Rui-Sheng; Wei Zheng-Jun

    2008-01-01

    In this paper, the theoretical analysis and simulating calculation were conducted for a basic two-stage semiconductor thermoelectric module, which contains one thermocouple in the second stage and several thermocouples in the first stage. The study focused on the configuration of the two-stage semiconductor thermoelectric cooler, especially investigating the influences of some parameters, such as the current I1 of the first stage, the area A1 of every thermocouple and the number n of thermocouples in the first stage, on the cooling performance of the module. The obtained results of analysis indicate that changing the current I1 of the first stage, the area A1 of thcrmocouples and the number n of thermocouples in the first stage can improve the cooling performance of the module. These results can be used to optimize the configuration of the two-stage semiconductor thermoelectric module and provide guides for the design and application of thermoelectric cooler.

  9. Two-Stage Revision Anterior Cruciate Ligament Reconstruction: Bone Grafting Technique Using an Allograft Bone Matrix.

    Science.gov (United States)

    Chahla, Jorge; Dean, Chase S; Cram, Tyler R; Civitarese, David; O'Brien, Luke; Moulton, Samuel G; LaPrade, Robert F

    2016-02-01

    Outcomes of primary anterior cruciate ligament (ACL) reconstruction have been reported to be far superior to those of revision reconstruction. However, as the incidence of ACL reconstruction is rapidly increasing, so is the number of failures. The subsequent need for revision ACL reconstruction is estimated to occur in up to 13,000 patients each year in the United States. Revision ACL reconstruction can be performed in one or two stages. A two-stage approach is recommended in cases of improper placement of the original tunnels or in cases of unacceptable tunnel enlargement. The aim of this study was to describe the technique for allograft ACL tunnel bone grafting in patients requiring a two-stage revision ACL reconstruction.

  10. A two-stage subsurface vertical flow constructed wetland for high-rate nitrogen removal.

    Science.gov (United States)

    Langergraber, Guenter; Leroch, Klaus; Pressl, Alexander; Rohrhofer, Roland; Haberl, Raimund

    2008-01-01

    By using a two-stage constructed wetland (CW) system operated with an organic load of 40 gCOD.m(-2).d(-1) (2 m2 per person equivalent) average nitrogen removal efficiencies of about 50% and average nitrogen elimination rates of 980 g N.m(-2).yr(-1) could be achieved. Two vertical flow beds with intermittent loading have been operated in series. The first stage uses sand with a grain size of 2-3.2 mm for the main layer and has a drainage layer that is impounded; the second stage sand with a grain size of 0.06-4 mm and a drainage layer with free drainage. The high nitrogen removal can be achieved without recirculation thus it is possible to operate the two-stage CW system without energy input. The paper shows performance data for the two-stage CW system regarding removal of organic matter and nitrogen for the two year operating period of the system. Additionally, its efficiency is compared with the efficiency of a single-stage vertical flow CW system designed and operated according to the Austrian design standards with 4 m2 per person equivalent. The comparison shows that a higher effluent quality could be reached with the two-stage system although the two-stage CW system is operated with the double organic load or half the specific surface area requirement, respectively. Another advantage is that the specific investment costs of the two-stage CW system amount to 1,200 EUR per person (without mechanical pre-treatment) and are only about 60% of the specific investment costs of the singe-stage CW system. IWA Publishing 2008.

  11. Two-Stage orders sequencing system for mixed-model assembly

    Science.gov (United States)

    Zemczak, M.; Skolud, B.; Krenczyk, D.

    2015-11-01

    In the paper, the authors focus on the NP-hard problem of orders sequencing, formulated similarly to Car Sequencing Problem (CSP). The object of the research is the assembly line in an automotive industry company, on which few different models of products, each in a certain number of versions, are assembled on the shared resources, set in a line. Such production type is usually determined as a mixed-model production, and arose from the necessity of manufacturing customized products on the basis of very specific orders from single clients. The producers are nowadays obliged to provide each client the possibility to determine a huge amount of the features of the product they are willing to buy, as the competition in the automotive market is large. Due to the previously mentioned nature of the problem (NP-hard), in the given time period only satisfactory solutions are sought, as the optimal solution method has not yet been found. Most of the researchers that implemented inaccurate methods (e.g. evolutionary algorithms) to solving sequencing problems dropped the research after testing phase, as they were not able to obtain reproducible results, and met problems while determining the quality of the received solutions. Therefore a new approach to solving the problem, presented in this paper as a sequencing system is being developed. The sequencing system consists of a set of determined rules, implemented into computer environment. The system itself works in two stages. First of them is connected with the determination of a place in the storage buffer to which certain production orders should be sent. In the second stage of functioning, precise sets of sequences are determined and evaluated for certain parts of the storage buffer under certain criteria.

  12. Methane production from sweet sorghum residues via a two-stage process

    Energy Technology Data Exchange (ETDEWEB)

    Stamatelatou, K.; Dravillas, K.; Lyberatos, G. [University of Patras (Greece). Department of Chemical Engineering, Laboratory of Biochemical Engineering and Environmental Technology

    2003-07-01

    The start-up of a two-stage reactor configuration for the anaerobic digestion of sweet sorghum residues was evaluated. The sweet sorghum residues were a waste stream originating from the alcoholic fermentation of sweet sorghum and the subsequent distillation step. This waste stream contained high concentration of solid matter (9% TS) and thus could be characterized as a semi-solid, not easily biodegradable wastewater with high COD (115 g/l). The application of the proposed two-stage configuration (consisting of one thermophilic hydrolyser and one mesophilic methaniser) achieved a methane production of 16 l/l wastewater under a hydraulic retention time of 19 d. (author)

  13. One-stage and two-stage penile buccal mucosa urethroplasty

    Directory of Open Access Journals (Sweden)

    G. Barbagli

    2016-03-01

    Full Text Available The paper provides the reader with the detailed description of current techniques of one-stage and two-stage penile buccal mucosa urethroplasty. The paper provides the reader with the preoperative patient evaluation paying attention to the use of diagnostic tools. The one-stage penile urethroplasty using buccal mucosa graft with the application of glue is preliminary showed and discussed. Two-stage penile urethroplasty is then reported. A detailed description of first-stage urethroplasty according Johanson technique is reported. A second-stage urethroplasty using buccal mucosa graft and glue is presented. Finally postoperative course and follow-up are addressed.

  14. Development of a linear compressor for two-stage pulse tube cryocoolers

    Institute of Scientific and Technical Information of China (English)

    Peng-da YAN; Wei-li GAO; Guo-bang CHEN

    2009-01-01

    A valveless linear compressor was built up to drive a self-made two-stage pulse tube cryocooler. With a designed maximum swept volume of 60 cm~3, the compressor can provide the cryocooler with a pressure volume (PV) power of 400 W.Preliminary measurements of the compressor indicated that both an efficiency of 35%~55% and a pressure ratio of 1.3~1.4 could be obtained. The two-stage pulse tube cryocooler driven by this compressor achieved the lowest temperature of 14.2 K.

  15. Terephthalic acid wastewater treatment by using two-stage aerobic process

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Based on the tests between anoxic and aerobic process, the two-stage aerobic process with a biological selector was chosen to treat terephthalic acid wastewater (PTA). By adopting the two- stage aerobic process, the CODCr in PTA wastewater could be reduced from 4000-6000 mg/L to below 100 mg/L; the COD loading in the first aerobic tank could reach 7.0-8.0 kgCODCr/(m3.d) and that of the second stage was from 0.2 to 0.4 kgCODCr/(m3.d). Further researches on the kinetics of substrate degradation were carried out.

  16. First Law Analysis of a Two-stage Ejector-vapor Compression Refrigeration Cycle working with R404A

    National Research Council Canada - National Science Library

    Feiza Memet; Daniela-Elena Mitu

    2011-01-01

    The traditional two-stage vapor compression refrigeration cycle might be replaced by a two-stage ejector-vapor compression refrigeration cycle if it is aimed the decrease of irreversibility during expansion...

  17. MmoSTI restriction endonuclease, isolated from Morganella morganii infecting a tropical moth, Actias selene, cleaving 5'-|CCNGG-3' sequences.

    Science.gov (United States)

    Skowron, Marta A; Zebrowska, Joanna; Wegrzyn, Grzegorz; Skowron, Piotr M

    2016-02-01

    A type II restriction endonuclease, MmoSTI, from the pathogenic bacterium Morganella morganii infecting a tropical moth, Actias selene, has been detected and biochemically characterized, as a potential etiological differentiation factor. The described REase recognizes interrupted palindromes, i.e., 5'-CCNGG-3' sequences and cleaves DNA leaving 5-nucleotide (nt) long, single-stranded (ss), 5'-cohesive ends, which was determined by three complementary methods: (i) cleavage of custom and standard DNA substrates, (ii) run-off sequencing of cleavage products, and (iii) shotgun cloning and sequencing of bacteriophage lambda (λ) DNA digested with MmoSTI. MmoSTI, the first 5'-CCNGG-3' REase characterized from M. morganii, is a neoschizomer of ScrFI, which cleaves DNA leaving 1-nt long, ss, 5'-cohesive ends. It is a high-frequency cutter and can be isolated from easily cultured bacteria, thus it can potentially serve as a tool for DNA manipulations.

  18. SU-E-J-128: Two-Stage Atlas Selection in Multi-Atlas-Based Image Segmentation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, T; Ruan, D [UCLA School of Medicine, Los Angeles, CA (United States)

    2015-06-15

    Purpose: In the new era of big data, multi-atlas-based image segmentation is challenged by heterogeneous atlas quality and high computation burden from extensive atlas collection, demanding efficient identification of the most relevant atlases. This study aims to develop a two-stage atlas selection scheme to achieve computational economy with performance guarantee. Methods: We develop a low-cost fusion set selection scheme by introducing a preliminary selection to trim full atlas collection into an augmented subset, alleviating the need for extensive full-fledged registrations. More specifically, fusion set selection is performed in two successive steps: preliminary selection and refinement. An augmented subset is first roughly selected from the whole atlas collection with a simple registration scheme and the corresponding preliminary relevance metric; the augmented subset is further refined into the desired fusion set size, using full-fledged registration and the associated relevance metric. The main novelty of this work is the introduction of an inference model to relate the preliminary and refined relevance metrics, based on which the augmented subset size is rigorously derived to ensure the desired atlases survive the preliminary selection with high probability. Results: The performance and complexity of the proposed two-stage atlas selection method were assessed using a collection of 30 prostate MR images. It achieved comparable segmentation accuracy as the conventional one-stage method with full-fledged registration, but significantly reduced computation time to 1/3 (from 30.82 to 11.04 min per segmentation). Compared with alternative one-stage cost-saving approach, the proposed scheme yielded superior performance with mean and medium DSC of (0.83, 0.85) compared to (0.74, 0.78). Conclusion: This work has developed a model-guided two-stage atlas selection scheme to achieve significant cost reduction while guaranteeing high segmentation accuracy. The benefit

  19. Mixed effect regression analysis for a cluster-based two-stage outcome-auxiliary-dependent sampling design with a continuous outcome.

    Science.gov (United States)

    Xu, Wangli; Zhou, Haibo

    2012-09-01

    Two-stage design is a well-known cost-effective way for conducting biomedical studies when the exposure variable is expensive or difficult to measure. Recent research development further allowed one or both stages of the two-stage design to be outcome dependent on a continuous outcome variable. This outcome-dependent sampling feature enables further efficiency gain in parameter estimation and overall cost reduction of the study (e.g. Wang, X. and Zhou, H., 2010. Design and inference for cancer biomarker study with an outcome and auxiliary-dependent subsampling. Biometrics 66, 502-511; Zhou, H., Song, R., Wu, Y. and Qin, J., 2011. Statistical inference for a two-stage outcome-dependent sampling design with a continuous outcome. Biometrics 67, 194-202). In this paper, we develop a semiparametric mixed effect regression model for data from a two-stage design where the second-stage data are sampled with an outcome-auxiliary-dependent sample (OADS) scheme. Our method allows the cluster- or center-effects of the study subjects to be accounted for. We propose an estimated likelihood function to estimate the regression parameters. Simulation study indicates that greater study efficiency gains can be achieved under the proposed two-stage OADS design with center-effects when compared with other alternative sampling schemes. We illustrate the proposed method by analyzing a dataset from the Collaborative Perinatal Project.

  20. Neuroscience and approach/avoidance personality traits: a two stage (valuation-motivation) approach.

    Science.gov (United States)

    Corr, Philip J; McNaughton, Neil

    2012-11-01

    Many personality theories link specific traits to the sensitivities of the neural systems that control approach and avoidance. But there is no consensus on the nature of these systems. Here we combine recent advances in economics and neuroscience to provide a more solid foundation for a neuroscience of approach/avoidance personality. We propose a two-stage integration of valuation (loss/gain) sensitivities with motivational (approach/avoidance/conflict) sensitivities. Our key conclusions are: (1) that valuation of appetitive and aversive events (e.g. gain and loss as studied by behavioural economists) is an independent perceptual input stage--with the economic phenomenon of loss aversion resulting from greater negative valuation sensitivity compared to positive valuation sensitivity; (2) that valuation of an appetitive stimulus then interacts with a contingency of presentation or omission to generate a motivational 'attractor' or 'repulsor', respectively (vice versa for an aversive stimulus); (3) the resultant behavioural tendencies to approach or avoid have distinct sensitivities to those of the valuation systems; (4) while attractors and repulsors can reinforce new responses they also, more usually, elicit innate or previously conditioned responses and so the perception/valuation-motivation/action complex is best characterised as acting as a 'reinforcer' not a 'reinforcement'; and (5) approach-avoidance conflict must be viewed as activating a third motivation system that is distinct from the basic approach and avoidance systems. We provide examples of methods of assessing each of the constructs within approach-avoidance theories and of linking these constructs to personality measures. We sketch a preliminary five-element reinforcer sensitivity theory (RST-5) as a first step in the integration of existing specific approach-avoidance theories into a coherent neuroscience of personality.

  1. METHODOLOGY AND RESULTS OF MOBILE OBJECT PURSUIT PROBLEM SOLUTION WITH TWO-STAGE DYNAMIC SYSTEM

    Directory of Open Access Journals (Sweden)

    A. Kiselev Mikhail

    2017-01-01

    Full Text Available The experience of developing unmanned fighting vehicles indicates that the main challenge in this field reduces itself to creating the systems which can replace the pilot both as a sensor and as the operator of the flight. This problem can be partial- ly solved by introducing remote control, but there are certain flight segments where it can only be executed under fully inde- pendent control and data support due to various reasons, such as tight time, short duration, lack of robust communication, etc. Such stages also include close-range air combat maneuvering (CRACM - a key flight segment as far as the fighter's purpose is concerned, which also places the highest demands on the fighter's design. Until recently the creation of an unmanned fighter airplane has been a fundamentally impossible task due to the absence of sensors able to provide the necessary data support to control the fighter during CRACM. However, the development prospects of aircraft hardware (passive type flush antennae, op- tico-locating panoramic view stations are indicative of producing possible solutions to this problem in the nearest future. There- fore, presently the only fundamental impediment on the way to developing an unmanned fighting aircraft is the problem of cre- ating algorithms for automatic trajectory control during CRACM. This paper presents the strategy of automatic trajectory con- trol synthesis by a two-stage dynamic system aiming to reach the conditions specified with respect to an object in pursuit. It contains certain results of control algorithm parameters impact assessment in regards to the pursuit mission effectiveness. Based on the obtained results a deduction is drawn pertaining to the efficiency of the offered method and its possible utilization in au- tomated control of an unmanned fighting aerial vehicle as well as organizing group interaction during CRACM.

  2. Overcoming the bottlenecks of anaerobic digestion of olive mill solid waste by two-stage fermentation.

    Science.gov (United States)

    Stoyanova, Elitza; Lundaa, Tserennyam; Bochmann, Günther; Fuchs, Werner

    2017-02-01

    Two-stage anaerobic digestion (AD) of two-phase olive mill solid waste (OMSW) was applied for reducing the inhibiting factors by optimizing the acidification stage. Single-stage AD and co-fermentation with chicken manure were conducted coinstantaneous for direct comparison. Degradation of the polyphenols up to 61% was observed during the methanogenic stage. Nevertheless the concentration of phenolic substances was still high; the two-stage fermentation remained stable at OLR 1.5 kgVS/m³day. The buffer capacity of the system was twice as high, compared to the one-stage fermentation, without additives. The two-stage AD was a combined process - thermophilic first stage and mesophilic second stage, which pointed out to be the most profitable for AD of OMSW for the reduced hydraulic retention time (HRT) from 230 to 150 days, and three times faster than the single-stage and the co-fermentation start-up of the fermentation. The optimal HRT and incubation temperature for the first stage were determined to four days and 55°C. The performance of the two-stage AD concerning the stability of the process was followed by the co-digestion of OMSW with chicken manure as a nitrogen-rich co-substrate, which makes them viable options for waste disposal with concomitant energy recovery.

  3. The Design, Construction and Operation of a 75 kW Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Henriksen, Ulrik Birk; Ahrenfeldt, Jesper; Jensen, Torben Kvist

    2003-01-01

    The Two-Stage Gasifier was operated for several weeks (465 hours) and of these 190 hours continuously. The gasifier is operated automatically unattended day and night, and only small adjustments of the feeding rate were necessary once or twice a day. The operation was successful, and the output a...... of the reactor had to be constructed in some other material....

  4. Treatment of corn ethanol distillery wastewater using two-stage anaerobic digestion.

    Science.gov (United States)

    Ráduly, B; Gyenge, L; Szilveszter, Sz; Kedves, A; Crognale, S

    In this study the mesophilic two-stage anaerobic digestion (AD) of corn bioethanol distillery wastewater is investigated in laboratory-scale reactors. Two-stage AD technology separates the different sub-processes of the AD in two distinct reactors, enabling the use of optimal conditions for the different microbial consortia involved in the different process phases, and thus allowing for higher applicable organic loading rates (OLRs), shorter hydraulic retention times (HRTs) and better conversion rates of the organic matter, as well as higher methane content of the produced biogas. In our experiments the reactors have been operated in semi-continuous phase-separated mode. A specific methane production of 1,092 mL/(L·d) has been reached at an OLR of 6.5 g TCOD/(L·d) (TCOD: total chemical oxygen demand) and a total HRT of 21 days (5.7 days in the first-stage, and 15.3 days in the second-stage reactor). Nonetheless the methane concentration in the second-stage reactor was very high (78.9%); the two-stage AD outperformed the reference single-stage AD (conducted at the same reactor loading rate and retention time) by only a small margin in terms of volumetric methane production rate. This makes questionable whether the higher methane content of the biogas counterbalances the added complexity of the two-stage digestion.

  5. A two-stage ethanol-based biodiesel production in a packed bed reactor

    DEFF Research Database (Denmark)

    Xu, Yuan; Nordblad, Mathias; Woodley, John

    2012-01-01

    A two-stage enzymatic process for producing fatty acid ethyl ester (FAEE) in a packed bed reactor is reported. The process uses an experimental immobilized lipase (NS 88001) and Novozym 435 to catalyze transesterification (first stage) and esterification (second stage), respectively. Both stages...

  6. Use a Log Splitter to Demonstrate Two-Stage Hydraulic Pump

    Science.gov (United States)

    Dell, Timothy W.

    2012-01-01

    The two-stage hydraulic pump is commonly used in many high school and college courses to demonstrate hydraulic systems. Unfortunately, many textbooks do not provide a good explanation of how the technology works. Another challenge that instructors run into with teaching hydraulic systems is the cost of procuring an expensive real-world machine…

  7. Two-Stage Sampling Procedures for Comparing Means When Population Distributions Are Non-Normal.

    Science.gov (United States)

    Luh, Wei-Ming; Olejnik, Stephen

    Two-stage sampling procedures for comparing two population means when variances are heterogeneous have been developed by D. G. Chapman (1950) and B. K. Ghosh (1975). Both procedures assume sampling from populations that are normally distributed. The present study reports on the effect that sampling from non-normal distributions has on Type I error…

  8. Some design aspects of a two-stage rail-to-rail CMOS op amp

    NARCIS (Netherlands)

    Gierkink, S.L.J.; Holzmann, Peter J.; Wiegerink, R.J.; Wassenaar, R.F.

    1999-01-01

    A two-stage low-voltage CMOS op amp with rail-to-rail input and output voltage ranges is presented. The circuit uses complementary differential input pairs to achieve the rail-to-rail common-mode input voltage range. The differential pairs operate in strong inversion, and the constant transconductan

  9. Capacity Analysis of Two-Stage Production lines with Many Products

    NARCIS (Netherlands)

    M.B.M. de Koster (René)

    1987-01-01

    textabstractWe consider two-stage production lines with an intermediate buffer. A buffer is needed when fluctuations occur. For single-product production lines fluctuations in capacity availability may be caused by random processing times, failures and random repair times. For multi-product producti

  10. Kinetics analysis of two-stage austenitization in supermartensitic stainless steel

    DEFF Research Database (Denmark)

    Nießen, Frank; Villa, Matteo; Hald, John

    2017-01-01

    The martensite-to-austenite transformation in X4CrNiMo16-5-1 supermartensitic stainless steel was followed in-situ during isochronal heating at 2, 6 and 18 K min−1 applying energy-dispersive synchrotron X-ray diffraction at the BESSY II facility. Austenitization occurred in two stages, separated...

  11. An intracooling system for a novel two-stage sliding-vane air compressor

    Science.gov (United States)

    Murgia, Stefano; Valenti, Gianluca; Costanzo, Ida; Colletta, Daniele; Contaldi, Giulio

    2017-08-01

    Lube-oil injection is used in positive-displacement compressors and, among them, in sliding-vane machines to guarantee the correct lubrication of the moving parts and as sealing to prevent air leakage. Furthermore, lube-oil injection allows to exploit lubricant also as thermal ballast with a great thermal capacity to minimize the temperature increase during the compression. This study presents the design of a two-stage sliding-vane rotary compressor in which the air cooling is operated by high-pressure cold oil injection into a connection duct between the two stages. The heat exchange between the atomized oil jet and the air results in a decrease of the air temperature before the second stage, improving the overall system efficiency. This cooling system is named here intracooling, as opposed to intercooling. The oil injection is realized via pressure-swirl nozzles, both within the compressors and inside the intracooling duct. The design of the two-stage sliding-vane compressor is accomplished by way of a lumped parameter model. The model predicts an input power reduction as large as 10% for intercooled and intracooled two-stage compressors, the latter being slightly better, with respect to a conventional single-stage compressor for compressed air applications. An experimental campaign is conducted on a first prototype that comprises the low-pressure compressor and the intracooling duct, indicating that a significant temperature reduction is achieved in the duct.

  12. Development of a heavy-duty diesel engine with two-stage turbocharging

    NARCIS (Netherlands)

    Sturm, L.; Kruithof, J.

    2001-01-01

    A mean value model was developed by using Matrixx/ Systembuild simulation tool for designing real-time control algorithms for the two-stage engine. All desired characteristics are achieved, apart from lower A/F ratio at lower engine speeds and Turbocharger matches calculations. The CANbus is used to

  13. Two-stage, dilute sulfuric acid hydrolysis of wood : an investigation of fundamentals

    Science.gov (United States)

    John F. Harris; Andrew J. Baker; Anthony H. Conner; Thomas W. Jeffries; James L. Minor; Roger C. Pettersen; Ralph W. Scott; Edward L Springer; Theodore H. Wegner; John I. Zerbe

    1985-01-01

    This paper presents a fundamental analysis of the processing steps in the production of methanol from southern red oak (Quercus falcata Michx.) by two-stage dilute sulfuric acid hydrolysis. Data for hemicellulose and cellulose hydrolysis are correlated using models. This information is used to develop and evaluate a process design.

  14. Two-stage data envelopment analysis technique for evaluating internal supply chain efficiency

    Directory of Open Access Journals (Sweden)

    Nisakorn Somsuk

    2014-12-01

    Full Text Available A two-stage data envelopment analysis (DEA which uses mathematical linear programming techniques is applied to evaluate the efficiency of a system composed of two relational sub-processes, by which the outputs from the first sub-process (as the intermediate outputs of the system are the inputs for the second sub-process. The relative efficiencies of the system and its sub-processes can be measured by applying the two-stage DEA. According to the literature review on the supply chain management, this technique can be used as a tool for evaluating the efficiency of the supply chain composed of two relational sub-processes. The technique can help to determine the inefficient sub-processes. Once the inefficient sub-process was improved its efficiency, it would result in better aggregate efficiency of the supply chain. This paper aims to present a procedure for evaluating the efficiency of the supply chain by using the two-stage DEA, under the assumption of constant returns to scale, with an example of internal supply chain efficiency measurement of insurance companies by applying the two-stage DEA for illustration. Moreover, in this paper the authors also present some observations on the application of this technique.

  15. Two-stage estimation in copula models used in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2005-01-01

    In this paper register based family studies provide the motivation for studying a two-stage estimation procedure in copula models for multivariate failure time data. The asymptotic properties of the estimators in both parametric and semi-parametric models are derived, generalising the approach by...

  16. Innovative two-stage anaerobic process for effective codigestion of cheese whey and cattle manure.

    Science.gov (United States)

    Bertin, Lorenzo; Grilli, Selene; Spagni, Alessandro; Fava, Fabio

    2013-01-01

    The valorisation of agroindustrial waste through anaerobic digestion represents a significant opportunity for refuse treatment and renewable energy production. This study aimed to improve the codigestion of cheese whey (CW) and cattle manure (CM) by an innovative two-stage process, based on concentric acidogenic and methanogenic phases, designed for enhancing performance and reducing footprint. The optimum CW to CM ratio was evaluated under batch conditions. Thereafter, codigestion was implemented under continuous-flow conditions comparing one- and two-stage processes. The results demonstrated that the addition of CM in codigestion with CW greatly improved the anaerobic process. The highest methane yield was obtained co-treating the two substrates at equal ratio by using the innovative two-stage process. The proposed system reached the maximum value of 258 mL(CH4) g(gv(-1), which was more than twice the value obtained by the one-stage process and 10% higher than the value obtained by the two-stage one.

  17. Extraoral implants for orbit rehabilitation: a comparison between one-stage and two-stage surgeries.

    Science.gov (United States)

    de Mello, M C L M P; Guedes, R; de Oliveira, J A P; Pecorari, V A; Abrahão, M; Dib, L L

    2014-03-01

    The aim of the study was to compare the osseointegration success rate and time for delivery of the prosthesis among cases treated by two-stage or one-stage surgery for orbit rehabilitation between 2003 and 2011. Forty-five patients were included, 31 males and 14 females; 22 patients had two-stage surgery and 23 patients had one-stage surgery. A total 138 implants were installed, 42 (30.4%) on previously irradiated bone. The implant survival rate was 96.4%, with a success rate of 99.0% among non-irradiated patients and 90.5% among irradiated patients. Two-stage patients received 74 implants with a survival rate of 94.6% (four implants lost); one-stage surgery patients received 64 implants with a survival rate of 98.4% (one implant lost). The median time interval between implant fixation and delivery of the prosthesis for the two-stage group was 9.6 months and for the one-stage group was 4.0 months (P < 0.001). The one-stage technique proved to be reliable and was associated with few risks and complications; the rate of successful osseointegration was similar to those reported in the literature. The one-stage technique should be considered a viable procedure that shortens the time to final rehabilitation and facilitates appropriate patient follow-up treatment.

  18. Validation of Continuous CHP Operation of a Two-Stage Biomass Gasifier

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Henriksen, Ulrik Birk; Jensen, Torben Kvist

    2006-01-01

    The Viking gasification plant at the Technical University of Denmark was built to demonstrate a continuous combined heat and power operation of a two-stage gasifier fueled with wood chips. The nominal input of the gasifier is 75 kW thermal. To validate the continuous operation of the plant, a 9-d...

  19. High rate treatment of terephthalic acid production wastewater in a two-stage anaerobic bioreactor

    NARCIS (Netherlands)

    Kleerebezem, R.; Beckers, J.; Pol, L.W.H.; Lettinga, G.

    2005-01-01

    The feasibility was studied of anaerobic treatment of wastewater generated during purified terephthalic acid (PTA) production in two-stage upflow anaerobic sludge blanket (UASB) reactor system. The artificial influent of the system contained the main organic substrates of PTA-wastewater: acetate, be

  20. Thermal design of two-stage evaporative cooler based on thermal comfort criterion

    Science.gov (United States)

    Gilani, Neda; Poshtiri, Amin Haghighi

    2017-04-01

    Performance of two-stage evaporative coolers at various outdoor air conditions was numerically studied, and its geometric and physical characteristics were obtained based on thermal comfort criteria. For this purpose, a mathematical model was developed based on conservation equations of mass, momentum and energy to determine heat and mass transfer characteristics of the system. The results showed that two-stage indirect/direct cooler can provide the thermal comfort condition when outdoor air temperature and relative humidity are located in the range of 34-54 °C and 10-60 %, respectively. Moreover, as relative humidity of the ambient air rises, two-stage evaporative cooler with the smaller direct and larger indirect cooler will be needed. In building with high cooling demand, thermal comfort may be achieved at a greater air change per hour number, and thus an expensive two-stage evaporative cooler with a higher electricity consumption would be required. Finally, a design guideline was proposed to determine the size of required plate heat exchangers at various operating conditions.

  1. ADM1-based modeling of methane production from acidified sweet sorghum extractin a two stage process

    DEFF Research Database (Denmark)

    Antonopoulou, Georgia; Gavala, Hariklia N.; Skiadas, Ioannis

    2012-01-01

    The present study focused on the application of the Anaerobic Digestion Model 1 οn the methane production from acidified sorghum extract generated from a hydrogen producing bioreactor in a two-stage anaerobic process. The kinetic parameters for hydrogen and volatile fatty acids consumption were...

  2. Thermal design of two-stage evaporative cooler based on thermal comfort criterion

    Science.gov (United States)

    Gilani, Neda; Poshtiri, Amin Haghighi

    2016-09-01

    Performance of two-stage evaporative coolers at various outdoor air conditions was numerically studied, and its geometric and physical characteristics were obtained based on thermal comfort criteria. For this purpose, a mathematical model was developed based on conservation equations of mass, momentum and energy to determine heat and mass transfer characteristics of the system. The results showed that two-stage indirect/direct cooler can provide the thermal comfort condition when outdoor air temperature and relative humidity are located in the range of 34-54 °C and 10-60 %, respectively. Moreover, as relative humidity of the ambient air rises, two-stage evaporative cooler with the smaller direct and larger indirect cooler will be needed. In building with high cooling demand, thermal comfort may be achieved at a greater air change per hour number, and thus an expensive two-stage evaporative cooler with a higher electricity consumption would be required. Finally, a design guideline was proposed to determine the size of required plate heat exchangers at various operating conditions.

  3. A Two-Stage Exercise on the Binomial Distribution Using Minitab.

    Science.gov (United States)

    Shibli, M. Abdullah

    1990-01-01

    Describes a two-stage experiment that was designed to explain binomial distribution to undergraduate statistics students. A manual coin flipping exercise is explained as the first stage; a computerized simulation using MINITAB software is presented as stage two; and output from the MINITAB exercises is included. (two references) (LRW)

  4. The rearrangement process in a two-stage broadcast switching network

    DEFF Research Database (Denmark)

    Jacobsen, Søren B.

    1988-01-01

    The rearrangement process in the two-stage broadcast switching network presented by F.K. Hwang and G.W. Richards (ibid., vol.COM-33, no.10, p.1025-1035, Oct. 1985) is considered. By defining a certain function it is possible to calculate an upper bound on the number of connections to be moved...

  5. Two-stage laparoscopic resection of colon cancer and metastatic liver tumour

    Directory of Open Access Journals (Sweden)

    Yukio Iwashita

    2012-01-01

    Full Text Available We report herein the case of 70-year-old woman in whom colon cancer and a synchronous metastatic liver tumour were successfully resected laparoscopically. The tumours were treated in two stages. Both post-operative courses were uneventful, and there has been no recurrence during the 8 months since the second procedure.

  6. Two-stage laparoscopic resection of colon cancer and metastatic liver tumour

    Directory of Open Access Journals (Sweden)

    Iwashita Yukio

    2005-01-01

    Full Text Available We report herein the case of 70-year-old woman in whom colon cancer and a synchronous metastatic liver tumour were successfully resected laparoscopically. The tumours were treated in two stages. Both postoperative courses were uneventful, and there has been no recurrence during the 8 months since the second procedure.

  7. Two-stage bargaining with coverage extension in a dual labour market

    DEFF Research Database (Denmark)

    Roberts, Mark A.; Stæhr, Karsten; Tranæs, Torben

    2000-01-01

    This paper studies coverage extension in a simple general equilibrium model with a dual labour market. The union sector is characterized by two-stage bargaining whereas the firms set wages in the non-union sector. In this model firms and unions of the union sector have a commonality of interest...

  8. Optimisation of two-stage screw expanders for waste heat recovery applications

    Science.gov (United States)

    Read, M. G.; Smith, I. K.; Stosic, N.

    2015-08-01

    It has previously been shown that the use of two-phase screw expanders in power generation cycles can achieve an increase in the utilisation of available energy from a low temperature heat source when compared with more conventional single-phase turbines. However, screw expander efficiencies are more sensitive to expansion volume ratio than turbines, and this increases as the expander inlet vapour dryness fraction decreases. For singlestage screw machines with low inlet dryness, this can lead to under expansion of the working fluid and low isentropic efficiency for the expansion process. The performance of the cycle can potentially be improved by using a two-stage expander, consisting of a low pressure machine and a smaller high pressure machine connected in series. By expanding the working fluid over two stages, the built-in volume ratios of the two machines can be selected to provide a better match with the overall expansion process, thereby increasing efficiency for particular inlet and discharge conditions. The mass flow rate though both stages must however be matched, and the compromise between increasing efficiency and maximising power output must also be considered. This research uses a rigorous thermodynamic screw machine model to compare the performance of single and two-stage expanders over a range of operating conditions. The model allows optimisation of the required intermediate pressure in the two- stage expander, along with the rotational speed and built-in volume ratio of both screw machine stages. The results allow the two-stage machine to be fully specified in order to achieve maximum efficiency for a required power output.

  9. Bioavailability of selenium from fish, yeast and selenate: A comparative study in humans using stable isotopes

    NARCIS (Netherlands)

    Fox, T.E.; Heuvel, E.G.H.M. van den; Atherton, C.A.; Dainty, J.R.; Lewis, D.J.; Langford, N.J.; Crews, H.M.; Luten, J.B.; Lorentzen, M.; Sieling, F.W.; Aken-Schneyder, P. van; Hoek, M.; Kotterman, M.J.J.; Dael, P. van; Firweather-Tail, S.J.

    2004-01-01

    Objective: To measure the bioavailability of selenium from cooked and raw fish in humans by estimating and comparing apparent absorption and retention of selenium in biosynthetically labelled fish with labelled selenate and biosynthetically labelled selenium in brewers yeast. Design: The interventio

  10. Bioavailibility of selenium from fish, yeast and selenate: a comparative study in humans using stable isotopes

    NARCIS (Netherlands)

    Fox, T.E.; Heuvel, van den E.G.H.M.; Atherton, C.A.; Luten, J.B.; Hoek-van Nieuwenhuizen, van M.; Kotterman, M.J.J.

    2004-01-01

    Objective: To measure the bioavailability of selenium from cooked and raw fish in humans by estimating and comparing apparent absorption and retention of selenium in biosynthetically labelled fish with labelled selenate and biosynthetically labelled selenium in brewers yeast. Design: The interventio

  11. Macroscopic experimental and modeling evaluation of selenite and selenate adsorption mechanisms on gibbsite

    Science.gov (United States)

    Selenite Se(IV) and selenate Se(VI) adsorption behavior was investigated on gibbsite as a function of solution pH and solution ionic strength. Adsorption of both Se redox states decreased with increasing solution pH. Electrophoretic mobility measurements showed downward shifts in point of zero cha...

  12. Hydrophilic drug encapsulation in shell-core microcarriers by two stage polyelectrolyte complexation method.

    Science.gov (United States)

    Dalmoro, Annalisa; Sitenkov, Alexander Y; Cascone, Sara; Lamberti, Gaetano; Barba, Anna Angela; Moustafine, Rouslan I

    2017-02-25

    In this study a protocol exploiting the combination of the ultrasonic atomization and the complexation between polyelectrolytes was developed to efficiently encapsulate a hydrophilic chemotherapeutic agent essentially used in the treatment of colon cancer, 5-fluorouracil, in enteric shell-core alginate-based microcarriers. The atomization assisted by ultrasound allowed to obtain small droplets by supplying low energy and avoiding drug degradation. In particular microcarriers were produced in a home-made apparatus where both the core (composed of alginate, drug, and Pluronic F127) and shell (composed of only alginate) feed were separately sent to the coaxial ultrasonic atomizer where they were nebulized and placed in contact with the complexation bulk. With the aim to obtain microstructured particles of alginate encapsulating 5-fluorouracil, different formulations of the first complexation bulk were tested; at last an emulsion made of a calcium chloride aqueous solution and dichloromethane allowed to reach an encapsulation efficiency of about 50%. This result can be considered very interesting considering that in literature similar techniques gave 5-fluorouracil encapsulation efficiencies of about 10%. Since a single complexation stage was not able to assure microcarriers gastroresistance, the formulation of a second complexation bulk was evaluated. The solution of cationic and pH-insoluble Eudragit® RS 100 in dichloromethane was chosen as bulk of second-stage complexation obtaining good enteric properties of shell-core microcarriers, i.e. a 5-FU cumulative release at pH 1 (simulating gastric pH) lower than 35%. The formation of interpolyelectrolyte complex (IPEC) between countercharged polymers and the chemical stability of 5-FU in microcarriers were confirmed by FTIR analysis, the presence of an amorphous dispersion of 5-FU in prepared microparticles was also confirmed by DSC. Finally, shell-core enteric coated microcarriers encapsulating 5-fluorouracil were used to prepare tablets, which can be potentially used as oral administration dosage systems for their 5-fluorouracil slower release.

  13. Solution Method of Multi-Product Two-Stage Logistics Problem with Constraints of Delivery Course

    Science.gov (United States)

    Ataka, Shinichiro; Gen, Mitsuo

    The logistics network design is one of the important phase of Supply Chain Management (SCM) and it is the problem that should be optimized for long-term promotion of efficiency of the whole supply chain. Usually a plant produces different type of products. Even if it is a factory of the same company, delivery is different by a kind of a produced product. The restrictions which this model has are deeply concerned with TP in the real world. In this paper, we consider the logistics network design problems with multi-products and constraints for delivery course. To solve the problem, we used a hybrid priority-based Genetic Algorithm (h-priGA), and we tried the comparison experiment with priority-based Genetic Algorithm (priGA)and h-priGA, we show it about the effectiveness of h-priGA.

  14. Fabricated by Combined Modified Two-Stage Stir Casting and Squeeze Casting Methods

    Directory of Open Access Journals (Sweden)

    P. Shanmughasundaram

    2013-01-01

    Full Text Available Dry sliding wear behaviour of eutectic Al-Si alloy-graphite composites was investigated employing a pin-on-disc wear test rig. Results revealed that the wear and friction coefficients decreased linearly with increasing weight percentage of graphite particles. Wear resistance of the composite increased considerably with increasing sliding velocity at constant load. In contrast, the friction coefficient of Al-7.5 wt.% Gr composite increased when the sliding velocity was increased from 1 m/s to 2 m/s at 49 N. Worn-out surfaces of wear specimens after the test were examined by scanning electron microscopy to study the morphology of worn surfaces. EDS analysis was carried out to investigate the influence of mechanically mixed layer (MML which comprises oxides and iron, and this acted as an effective tribolayer in enhancing the wear resistance at higher sliding velocity.

  15. Speciation of arsenic and selenium in contaminated groundwaters of the Kelheim region; Untersuchungen zur Speziation von Arsen und Selen in belasteten Grundwaessern der Region Kelheim

    Energy Technology Data Exchange (ETDEWEB)

    Raessler, M. [Max-Planck-Institut fuer Biogeochemie, Dresden (Germany); Schulte-Hostede, S.; Seltmann, U.; Kettrup, A. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Oekologische Chemie; Schimetschek, J.; Seiler, K.P. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Hydrologie

    1999-07-01

    Results of speciation studies of arsenic and selenium in contaminated ground waters are presented. Arsenite, arsenate, selenite and selenate were separated chromatographically based on phosphate buffers and collected in fractions. Fractions were analysed element-specifically by hydride-generating atomic absorption spectrometry (H-AAS). It was the intention to develop an easy-to-handle and, nonetheless, reliable method suitable for long-range examination of the distribution of the species ('monitoring of species') including the threshold values of 10 {mu}g/l for each element, indicated by German Drinking Water Regulation (Trinkwasserverordnung). The reliability of the method was demonstrated by a set of analytical quality control experiments some of which are presented and discussed. Besides determination of species in the samples, we also examined the degree of association of arsenic and selenium species with inorganic colloids by ultrafiltration and element-specific detection. Most samples contained elevated amounts of both iron and manganese. However, only little association with iron and/or manganese oxyhydroxides was observed. One sample gave indication of association of selenium with organic matter. 'Free' arsenate and selenate ions dominated or were the only detectable species in the samples. Consequently, arsenic and selenium species in our samples turned out to be highly mobile. (orig.) [German] Ergebnisse zur Speziation von Arsen und Selen in belasteten Grundwasserproben aus dem Raum Kelheim werden vorgestellt. Hiezu wurden Arsenit, Arsenat, Selenit und Selenat chromatographisch unter Verwendung eines Phosphatpuffer-Gemisches getrennt und anschliessend fraktioniert. Die Fraktionen wurden element-spezifisch mit der hybriderzeugendem Atomabsorptionsspektrometrie (H-AAS) untersucht. Ziel der Autoren war, ein einfach zu handhabendes Verfahren zu entwickeln, welches zuverlaessig zur laengerfristigen Untersuchung der Speziesverteilung (&apos

  16. CZTSe solar cells prepared by electrodeposition of Cu/Sn/Zn stack layer followed by selenization at low Se pressure

    OpenAIRE

    Yao, Liyong; Ao, Jianping; Jeng, Ming-Jer; Bi, Jinlian; Gao, Shoushuai; He, Qing; Zhou, Zhiqiang; Sun, Guozhong; Sun, Yun; Chang, Liann-Be; Chen, Jian-Wun

    2014-01-01

    Cu2ZnSnSe4 (CZTSe) thin films are prepared by the electrodeposition of stack copper/tin/zinc (Cu/Sn/Zn) precursors, followed by selenization with a tin source at a substrate temperature of 530°C. Three selenization processes were performed herein to study the effects of the source of tin on the quality of CZTSe thin films that are formed at low Se pressure. Much elemental Sn is lost from CZTSe thin films during selenization without a source of tin. The loss of Sn from CZTSe thin films in sele...

  17. Effect of selenite and selenate on plant uptake of cadmium by maize (zea mays)

    Energy Technology Data Exchange (ETDEWEB)

    Shanker, K.; Mishra, S.; Srivastava, S. [Dayalbagh Educational Institute (India)

    1996-03-01

    Selenium has been reported to confer tolerance to toxicity of heavy metals including cadmium, a highly toxic and non essential heavy metal, which enters the food chain via plant uptake from soils. Selenium reduces availability of cadmium to plants along with other aspects of its toxicokinetics. When plants are supplied with selenite, selenium concentrations in the xylem exudate are lower than selenate. Most of the selenate was transported as selenate and unidentified organic Se compounds. In contrast, Se distribution among various Se fractions within plants does not depend significantly on whether selenite or selenate was used. Selenium has a strong tendency to form complexes with heavy metals like Cd, Hg, Ag and Tl. It has been suggested that the protective effects of selenium are due to the formation of non toxic Se-metal complexes, although the mechanism by which this protective effect is exerted remains unclear. Studies on the effect of selenium (selenite) and cadmium additions to the soil on their concentrations in lettuce and wheat has indicated the role of selenite in reduction of cadmium uptake. The cletoxifying effect of sodium selenite on cadmium ion in the freshwater fish Potyacuthus cupanus has been reported. The discovery that an element like selenium counteracts the toxicity, chemical carcinogenesis and reduces the plant uptake of other toxic metals, highlights the possibility of existence of a Se-metal interaction mechanism in soil plant systems. The uptake and translocation of root-absorbed chromium supplied through irrigation in the trivalent and hexavalant states in various parts of the onion plant (Allium cepa) grown in soil and sand culture has been recently reported by us. In continuation of that, this preliminary report describes the effect of selenite and selenate pretreatment on the uptake of cadmium in the maize plant (Zea mays).

  18. Two-Stage Thoracoscopic Repair of Long-Gap Esophageal Atresia Using Internal Traction Is Safe and Feasible.

    Science.gov (United States)

    Tainaka, Takahisa; Uchida, Hiroo; Tanano, Akihide; Shirota, Chiyoe; Hinoki, Akinari; Murase, Naruhiko; Yokota, Kazuki; Oshima, Kazuo; Shirotsuki, Ryo; Chiba, Kosuke; Amano, Hizuru; Kawashima, Hiroshi; Tanaka, Yujiro

    2017-01-01

    The treatment of long-gap esophageal atresia remains an issue for pediatric surgeons. Many techniques for treating long-gap esophageal atresia have been proposed, but the optimal method has not been established. The thoracoscopic esophageal elongation technique has recently been developed. We previously reported a case in which two-stage thoracoscopic repair was performed using internal esophageal traction without esophageal tearing, and we retrospectively reviewed the outcomes of this procedure in this study. Five patients underwent thoracoscopic treatment involving internal esophageal traction for esophageal atresia involving a long gap or vascular ring over a 5-year period. Between November 2010 and November 2015, 5 patients were treated with thoracoscopic traction. All of these patients successfully underwent thoracoscopic-delayed primary anastomosis. Conversion to open thoracotomy was not required in any case. The postoperative complications experienced by the patients included minor anastomotic leakage in 2 cases, anastomotic stenosis in 1 case, gastroesophageal reflux (GER) in 4 cases, and a hiatal hernia in 1 case. None of the patients died. Two-stage thoracoscopic repair for esophageal atresia involving a long gap or vascular ring is a safe and feasible procedure; however, we must develop methods for treating minor anastomotic complications and GER due to esophageal traction in future.

  19. Matching tutor to student: rules and mechanisms for efficient two-stage learning in neural circuits

    CERN Document Server

    Tesileanu, Tiberiu; Balasubramanian, Vijay

    2016-01-01

    Existing models of birdsong learning assume that brain area LMAN introduces variability into song for trial-and-error learning. Recent data suggest that LMAN also encodes a corrective bias driving short-term improvements in song. These later consolidate in area RA, a motor cortex analogue downstream of LMAN. We develop a new model of such two-stage learning. Using a stochastic gradient descent approach, we derive how 'tutor' circuits should match plasticity mechanisms in 'student' circuits for efficient learning. We further describe a reinforcement learning framework with which the tutor can build its teaching signal. We show that mismatching the tutor signal and plasticity mechanism can impair or abolish learning. Applied to birdsong, our results predict the temporal structure of the corrective bias from LMAN given a plasticity rule in RA. Our framework can be applied predictively to other paired brain areas showing two-stage learning.

  20. Two-stage precipitation process of iron and arsenic from acid leaching solutions

    Institute of Scientific and Technical Information of China (English)

    N.J.BOLIN; J.E.SUNDKVIST

    2008-01-01

    A leaching process for base metals recovery often generates considerable amounts of impurities such as iron and arsenic into the solution.It is a challenge to separate the non-valuable metals into manageable and stable waste products for final disposal,without loosing the valuable constituents.Boliden Mineral AB has patented a two-stage precipitation process that gives a very clean iron-arsenic precipitate by a minimum of coprecipitation of base metals.The obtained product shows to have good sedimentation and filtration properties,which makes it easy to recover the iron-arsenic depleted solution by filtration and washing of the precipitate.Continuos bench scale tests have been done,showing the excellent results achieved by the two-stage precipitation process.

  1. S-band gain-flattened EDFA with two-stage double-pass configuration

    Science.gov (United States)

    Fu, Hai-Wei; Xu, Shi-Chao; Qiao, Xue-Guang; Jia, Zhen-An; Liu, Ying-Gang; Zhou, Hong

    2011-11-01

    A gain-flattened S-band erbium-doped fiber amplifier (EDFA) using standard erbium-doped fiber (EDF) is proposed and experimentally demonstrated. The proposed amplifier with two-stage double-pass configuration employs two C-band suppressing filters to obtain the optical gain in S-band. The amplifier provides a maximum signal gain of 41.6 dB at 1524 nm with the corresponding noise figure of 3.8 dB. Furthermore, with a well-designed short-pass filter as a gain flattening filter (GFF), we are able to develop the S-band EDFA with a flattened gain of more than 20 dB in 1504-1524 nm. In the experiment, the two-stage double-pass amplifier configuration improves performance of gain and noise figure compared with the configuration of single-stage double-pass S-band EDFA.

  2. Power Frequency Oscillation Suppression Using Two-Stage Optimized Fuzzy Logic Controller for Multigeneration System

    Directory of Open Access Journals (Sweden)

    Y. K. Bhateshvar

    2016-01-01

    Full Text Available This paper attempts to develop a linearized model of automatic generation control (AGC for an interconnected two-area reheat type thermal power system in deregulated environment. A comparison between genetic algorithm optimized PID controller (GA-PID, particle swarm optimized PID controller (PSO-PID, and proposed two-stage based PSO optimized fuzzy logic controller (TSO-FLC is presented. The proposed fuzzy based controller is optimized at two stages: one is rule base optimization and other is scaling factor and gain factor optimization. This shows the best dynamic response following a step load change with different cases of bilateral contracts in deregulated environment. In addition, performance of proposed TSO-FLC is also examined for ±30% changes in system parameters with different type of contractual demands between control areas and compared with GA-PID and PSO-PID. MATLAB/Simulink® is used for all simulations.

  3. Toward Improving Electrocardiogram (ECG) Biometric Verification using Mobile Sensors: A Two-Stage Classifier Approach.

    Science.gov (United States)

    Tan, Robin; Perkowski, Marek

    2017-02-20

    Electrocardiogram (ECG) signals sensed from mobile devices pertain the potential for biometric identity recognition applicable in remote access control systems where enhanced data security is demanding. In this study, we propose a new algorithm that consists of a two-stage classifier combining random forest and wavelet distance measure through a probabilistic threshold schema, to improve the effectiveness and robustness of a biometric recognition system using ECG data acquired from a biosensor integrated into mobile devices. The proposed algorithm is evaluated using a mixed dataset from 184 subjects under different health conditions. The proposed two-stage classifier achieves a total of 99.52% subject verification accuracy, better than the 98.33% accuracy from random forest alone and 96.31% accuracy from wavelet distance measure algorithm alone. These results demonstrate the superiority of the proposed algorithm for biometric identification, hence supporting its practicality in areas such as cloud data security, cyber-security or remote healthcare systems.

  4. Effect of two-stage aging on superplasticity of Al-Li alloy

    Institute of Scientific and Technical Information of China (English)

    LUO Zhi-hui; ZHANG Xin-ming; DU Yu-xuan; YE Ling-ying

    2006-01-01

    The effect of two-stage aging on the microstructures and superplasticity of 01420 Al-Li alloy was investigated by means of OM, TEM analysis and stretching experiment. The results demonstrate that the second phase particles distributed more uniformly with a larger volume fraction can be observed after the two-stage aging (120 ℃, 12 h+300 ℃, 36 h) compared with the single-aging(300 ℃, 48 h). After rolling and recrystallization annealing, fine grains with size of 8-10 μm are obtained, and the superplastic elongation of the specimens reaches 560% at strain rate of 8×10-4 s-1 and 480 ℃. Uniformly distributed fine particles precipitate both on grain boundaries and in grains at lower temperature. When the sheet is aged at high temperature, the particles become coarser with a large volume fraction.

  5. Two stage bioethanol refining with multi litre stacked microbial fuel cell and microbial electrolysis cell.

    Science.gov (United States)

    Sugnaux, Marc; Happe, Manuel; Cachelin, Christian Pierre; Gloriod, Olivier; Huguenin, Gérald; Blatter, Maxime; Fischer, Fabian

    2016-12-01

    Ethanol, electricity, hydrogen and methane were produced in a two stage bioethanol refinery setup based on a 10L microbial fuel cell (MFC) and a 33L microbial electrolysis cell (MEC). The MFC was a triple stack for ethanol and electricity co-generation. The stack configuration produced more ethanol with faster glucose consumption the higher the stack potential. Under electrolytic conditions ethanol productivity outperformed standard conditions and reached 96.3% of the theoretically best case. At lower external loads currents and working potentials oscillated in a self-synchronized manner over all three MFC units in the stack. In the second refining stage, fermentation waste was converted into methane, using the scale up MEC stack. The bioelectric methanisation reached 91% efficiency at room temperature with an applied voltage of 1.5V using nickel cathodes. The two stage bioethanol refining process employing bioelectrochemical reactors produces more energy vectors than is possible with today's ethanol distilleries.

  6. Direct Torque Control of Sensorless Induction Machine Drives: A Two-Stage Kalman Filter Approach

    Directory of Open Access Journals (Sweden)

    Jinliang Zhang

    2015-01-01

    Full Text Available Extended Kalman filter (EKF has been widely applied for sensorless direct torque control (DTC in induction machines (IMs. One key problem associated with EKF is that the estimator suffers from computational burden and numerical problems resulting from high order mathematical models. To reduce the computational cost, a two-stage extended Kalman filter (TEKF based solution is presented for closed-loop stator flux, speed, and torque estimation of IM to achieve sensorless DTC-SVM operations in this paper. The novel observer can be similarly derived as the optimal two-stage Kalman filter (TKF which has been proposed by several researchers. Compared to a straightforward implementation of a conventional EKF, the TEKF estimator can reduce the number of arithmetic operations. Simulation and experimental results verify the performance of the proposed TEKF estimator for DTC of IMs.

  7. Syme's two-stage amputation in insulin-requiring diabetics with gangrene of the forefoot.

    Science.gov (United States)

    Pinzur, M S; Morrison, C; Sage, R; Stuck, R; Osterman, H; Vrbos, L

    1991-06-01

    Thirty-five insulin-requiring adult diabetic patients underwent 38 Syme's Two-Stage amputations for gangrene of the forefoot with nonreconstructible peripheral vascular insufficiency. All had a minimum Doppler ischemic index of 0.5, serum albumin of 3.0 gm/dl, and total lymphocyte count of 1500. Thirty-one (81.6%) eventually healed and were uneventfully fit with a prosthesis. Regional anesthesia was used in all of the patients, with 22 spinal and 16 ankle block anesthetics. Twenty-seven (71%) returned to their preamputation level of ambulatory function. Six (16%) had major, and fifteen (39%) minor complications following the first stage surgery. The results of this study support the use of the Syme's Two-Stage amputation in adult diabetic patients with gangrene of the forefoot requiring amputation.

  8. Low-noise SQUIDs with large transfer: two-stage SQUIDs based on DROSs

    Science.gov (United States)

    Podt, M.; Flokstra, J.; Rogalla, H.

    2002-08-01

    We have realized a two-stage integrated superconducting quantum interference device (SQUID) system with a closed loop bandwidth of 2.5 MHz, operated in a direct voltage readout mode. The corresponding flux slew rate was 1.3×10 5Φ0/s and the measured white flux noise was 1.3 μ Φ0/√Hz at 4.2 K. The system is based on a conventional dc SQUID with a double relaxation oscillation SQUID (DROS) as the second stage. Because of the large flux-to-voltage transfer, the sensitivity of the system is completely determined by the sensor SQUID and not by the DROS or the room-temperature preamplifier. Decreasing the Josephson junction area enables a further improvement of the sensitivity of the two-stage SQUID systems.

  9. Interval estimation of binomial proportion in clinical trials with a two-stage design.

    Science.gov (United States)

    Tsai, Wei-Yann; Chi, Yunchan; Chen, Chia-Min

    2008-01-15

    Generally, a two-stage design is employed in Phase II clinical trials to avoid giving patients an ineffective drug. If the number of patients with significant improvement, which is a binomial response, is greater than a pre-specified value at the first stage, then another binomial response at the second stage is also observed. This paper considers interval estimation of the response probability when the second stage is allowed to continue. Two asymptotic interval estimators, Wald and score, as well as two exact interval estimators, Clopper-Pearson and Sterne, are constructed according to the two binomial responses from this two-stage design, where the binomial response at the first stage follows a truncated binomial distribution. The mean actual coverage probability and expected interval width are employed to evaluate the performance of these interval estimators. According to the comparison results, the score interval is recommended for both Simon's optimal and minimax designs.

  10. Experiment and surge analysis of centrifugal two-stage turbocharging system

    Institute of Scientific and Technical Information of China (English)

    Yituan HE; Chaochen MA

    2008-01-01

    To study a centrifugal two-stage turbocharging system's surge and influencing factors, a special test bench was set up and the system surge test was performed. The test results indicate that the measured parameters such as air mass flow and rotation speed of a high pressure (HP) stage compressor can be converted into corrected para-meters under a standard condition according to the Mach number similarity criterion, because the air flow in a HP stage compressor has entered the Reynolds number (Re) auto-modeling range. Accordingly, the reasons leading to a two-stage turbocharging system's surge can be analyzed according to the corrected mass flow characteristic maps and actual operating conditions of HP and low pressure (LP) stage compressors.

  11. Hybrid staging of a Lysholm positive displacement engine with two Westinghouse two stage impulse Curtis turbines

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D.A.

    1982-06-01

    The University of California at Berkeley has tested and modeled satisfactorly a hybrid staged Lysholm engine (positive displacement) with a two stage Curtis wheel turbine. The system operates in a stable manner over its operating range (0/1-3/1 water ratio, 120 psia input). Proposals are made for controlling interstage pressure with a partial admission turbine and volume expansion to control mass flow and pressure ratio for the Lysholm engine.

  12. Noncausal two-stage image filtration at presence of observations with anomalous errors

    Directory of Open Access Journals (Sweden)

    S. V. Vishnevyy

    2013-04-01

    Full Text Available Introduction. It is necessary to develop adaptive algorithms, which allow to detect such regions and to apply filter with respective parameters for suppression of anomalous noises for the purposes of image filtration, which consist of regions with anomalous errors. Development of adaptive algorithm for non-causal two-stage images filtration at pres-ence of observations with anomalous errors. The adaptive algorithm for noncausal two-stage filtration is developed. On the first stage the adaptive one-dimensional algorithm for causal filtration is used for independent processing along rows and columns of image. On the second stage the obtained data are united and a posteriori estimations are calculated. Results of experimental investigations. The developed adaptive algorithm for noncausal images filtration at presence of observations with anomalous errors is investigated on the model sample by means of statistical modeling on PC. The image is modeled as a realization of Gaussian-Markov random field. The modeled image is corrupted with uncorrelated Gaussian noise. Regions of image with anomalous errors are corrupted with uncorrelated Gaussian noise which has higher power than normal noise on the rest part of the image. Conclusions. The analysis of adaptive algorithm for noncausal two-stage filtration is done. The characteristics of accuracy of computed estimations are shown. The comparisons of first stage and second stage of the developed adaptive algorithm are done. Adaptive algorithm is compared with known uniform two-stage algorithm of image filtration. According to the obtained results the uniform algorithm does not suppress anomalous noise meanwhile the adaptive algorithm shows good results.

  13. Full noise characterization of a low-noise two-stage SQUID amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Falferi, P [Istituto di Fotonica e Nanotecnologie, CNR-Fondazione Bruno Kessler, 38100 Povo, Trento (Italy); Mezzena, R [INFN, Gruppo Collegato di Trento, Sezione di Padova, 38100 Povo, Trento (Italy); Vinante, A [INFN, Sezione di Padova, 35131 Padova (Italy)], E-mail: falferi@science.unitn.it

    2009-07-15

    From measurements performed on a low-noise two-stage SQUID amplifier coupled to a high- Q electrical resonator we give a complete noise characterization of the SQUID amplifier around the resonator frequency of 11 kHz in terms of additive, back action and cross-correlation noise spectral densities. The minimum noise temperature evaluated at 135 mK is 10 {mu}K and corresponds to an energy resolution of 18{Dirac_h}.

  14. A covariate adjusted two-stage allocation design for binary responses in randomized clinical trials.

    Science.gov (United States)

    Bandyopadhyay, Uttam; Biswas, Atanu; Bhattacharya, Rahul

    2007-10-30

    In the present work, we develop a two-stage allocation rule for binary response using the log-odds ratio within the Bayesian framework allowing the current allocation to depend on the covariate value of the current subject. We study, both numerically and theoretically, several exact and limiting properties of this design. The applicability of the proposed methodology is illustrated by using some data set. We compare this rule with some of the existing rules by computing various performance measures.

  15. Development of a Novel Type Catalyst SY-2 for Two-Stage Hydrogenation of Pyrolysis Gasoline

    Institute of Scientific and Technical Information of China (English)

    Wu Linmei; Zhang Xuejun; Zhang Zhihua; Wang Fucun

    2004-01-01

    By using the group ⅢB or groupⅦB metals and modulating the characteristics of electric charges on carrier surface, improving the catalyst preparation process and techniques for loading the active metal components, a novel type SY-2 catalyst earmarked for two-stage hydrogenation of pyrolysis gasoline has been developed. The catalyst evaluation results have indicated that the novel catalyst is characterized by a better hydrogenation reaction activity to give higher aromatic yield.

  16. Investigation on a two-stage solvay refrigerator with magnetic material regenerator

    Science.gov (United States)

    Chen, Guobang; Zheng, Jianyao; Zhang, Fagao; Yu, Jianping; Tao, Zhenshi; Ding, Cenyu; Zhang, Liang; Wu, Peiyi; Long, Yi

    This paper describes experimental results that the no-load temperature of a two-stage Solvay refrigerator has been reached in liquid helium temperature region from the original 11.5 K by using magnetic regenerative material instead of lead. The structure and technological characteristics of the prototype machine are presented. The effects of operating frequency and pressure on the refrigerating temperature have been discussed in this paper.

  17. Biological hydrogen production from olive mill wastewater with two-stage processes

    Energy Technology Data Exchange (ETDEWEB)

    Eroglu, Ela; Eroglu, Inci [Department of Chemical Engineering, Middle East Technical University, 06531, Ankara (Turkey); Guenduez, Ufuk; Yuecel, Meral [Department of Biology, Middle East Technical University, 06531, Ankara (Turkey); Tuerker, Lemi [Department of Chemistry, Middle East Technical University, 06531, Ankara (Turkey)

    2006-09-15

    In the present work two novel two-stage hydrogen production processes from olive mill wastewater (OMW) have been introduced. The first two-stage process involved dark-fermentation followed by a photofermentation process. Dark-fermentation by activated sludge cultures and photofermentation by Rhodobacter sphaeroides O.U.001 were both performed in 55ml glass vessels, under anaerobic conditions. In some cases of dark-fermentation, activated sludge was initially acclimatized to the OMW to provide the adaptation of microorganisms to the extreme conditions of OMW. The highest hydrogen production potential obtained was 29l{sub H{sub 2}}/l{sub OMW} after photofermentation with 50% (v/v) effluent of dark fermentation with activated sludge. Photofermentation with 50% (v/v) effluent of dark fermentation with acclimated activated sludge had the highest hydrogen production rate (0.008ll{sup -1}h{sup -1}). The second two-stage process involved a clay treatment step followed by photofermentation by R. sphaeroides O.U.001. Photofermentation with the effluent of the clay pretreatment process (4% (v/v)) gives the highest hydrogen production potential (35l{sub H{sub 2}}/l{sub OMW}), light conversion efficiency (0.42%) and COD conversion efficiency (52%). It was concluded that both pretreatment processes enhanced the photofermentative hydrogen production process. Moreover, hydrogen could be produced with highly concentrated OMW. Two-stage processes developed in the present investigation have a high potential for solving the environmental problems caused by OMW. (author)

  18. The two-stage aegean extension, from localized to distributed, a result of slab rollback acceleration

    OpenAIRE

    Brun, Jean-Pierre; Faccenna, Claudio; Gueydan, Frédéric; Sokoutis, Dimitrios; Philippon, Mélody; Kydonakis, Konstantinos; Gorini, Christian

    2016-01-01

    International audience; Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domai...

  19. A Two-stage Discriminating Framework for Making Supply Chain Operation Decisions under Uncertainties

    OpenAIRE

    Gu, H; Rong, G

    2010-01-01

    This paper addresses the problem of making supply chain operation decisions for refineries under two types of uncertainties: demand uncertainty and incomplete information shared with suppliers and transport companies. Most of the literature only focus on one uncertainty or treat more uncertainties identically. However, we note that refineries have more power to control uncertainties in procurement and transportation than in demand in the real world. Thus, a two-stage framework for dealing wit...

  20. Low-noise SQUIDs with large transfer: two-stage SQUIDs based on DROSs

    NARCIS (Netherlands)

    Podt, M.; Flokstra, Jakob; Rogalla, Horst

    2002-01-01

    We have realized a two-stage integrated superconducting quantum interference device (SQUID) system with a closed loop bandwidth of 2.5 MHz, operated in a direct voltage readout mode. The corresponding flux slew rate was 1.3×105 Φ0/s and the measured white flux noise was 1.3 μΦ0/√Hz at 4.2 K. The

  1. Latent Inhibition as a Function of US Intensity in a Two-Stage CER Procedure

    Science.gov (United States)

    Rodriguez, Gabriel; Alonso, Gumersinda

    2004-01-01

    An experiment is reported in which the effect of unconditioned stimulus (US) intensity on latent inhibition (LI) was examined, using a two-stage conditioned emotional response (CER) procedure in rats. A tone was used as the pre-exposed and conditioned stimulus (CS), and a foot-shock of either a low (0.3 mA) or high (0.7 mA) intensity was used as…

  2. Two stage dual gate MESFET monolithic gain control amplifier for Ka-band

    Science.gov (United States)

    Sokolov, V.; Geddes, J.; Contolatis, A.

    A monolithic two stage gain control amplifier has been developed using submicron gate length dual gate MESFETs fabricated on ion implanted material. The amplifier has a gain of 12 dB at 30 GHz with a gain control range of over 30 dB. This ion implanted monolithic IC is readily integrable with other phased array receiver functions such as low noise amplifiers and phase shifters.

  3. Exergy analysis of vapor compression refrigeration cycle with two-stage and intercooler

    Science.gov (United States)

    Kılıç, Bayram

    2012-07-01

    In this study, exergy analyses of vapor compression refrigeration cycle with two-stage and intercooler using refrigerants R507, R407c, R404a were carried out. The necessary thermodynamic values for analyses were calculated by Solkane program. The coefficient of performance, exergetic efficiency and total irreversibility rate of the system in the different operating conditions for these refrigerants were investigated. The coefficient of performance, exergetic efficiency and total irreversibility rate for alternative refrigerants were compared.

  4. Exergy analysis of vapor compression refrigeration cycle with two-stage and intercooler

    Energy Technology Data Exchange (ETDEWEB)

    Kilic, Bayram [Mehmet Akif Ersoy University, Bucak Emin Guelmez Vocational School, Bucak, Burdur (Turkey)

    2012-07-15

    In this study, exergy analyses of vapor compression refrigeration cycle with two-stage and intercooler using refrigerants R507, R407c, R404a were carried out. The necessary thermodynamic values for analyses were calculated by Solkane program. The coefficient of performance, exergetic efficiency and total irreversibility rate of the system in the different operating conditions for these refrigerants were investigated. The coefficient of performance, exergetic efficiency and total irreversibility rate for alternative refrigerants were compared. (orig.)

  5. Performance of Combined Water Turbine Darrieus-Savonius with Two Stage Savonius Buckets and Single Deflector

    OpenAIRE

    Sahim, Kaprawi; Santoso, Dyos; Sipahutar, Riman

    2016-01-01

    The objective of this study is to show the effect of single deflector plate on the performance of combined Darrieus-Savonius water turbine. In order to overcome the disadvantages of low torque of solo Darrieus turbine, a plate deflector mounted in front of returning Savonius bucket of combined water turbine composing of Darrieus and Savonius rotor has been proposed in this study. Some configurations of combined turbines with two stage Savonius rotors were experimentally tested in a river of c...

  6. Perceived Health Benefits and Soy Consumption Behavior: Two-Stage Decision Model Approach

    OpenAIRE

    Moon, Wanki; Balasubramanian, Siva K.; Rimal, Arbindra

    2005-01-01

    A two-stage decision model is developed to assess the effect of perceived soy health benefits on consumers' decisions with respect to soy food. The first stage captures whether or not to consume soy food, while the second stage reflects how often to consume. A conceptual/analytical framework is also employed, combining Lancaster's characteristics model and Fishbein's multi-attribute model. Results show that perceived soy health benefits significantly influence both decision stages. Further, c...

  7. High quantum efficiency mid-wavelength interband cascade infrared photodetectors with one and two stages

    Science.gov (United States)

    Zhou, Yi; Chen, Jianxin; Xu, Zhicheng; He, Li

    2016-08-01

    In this paper, we report on mid-wavelength infrared interband cascade photodetectors grown on InAs substrates. We studied the transport properties of the photon-generated carriers in the interband cascade structures by comparing two different detectors, a single stage detector and a two-stage cascade detector. The two-stage device showed quantum efficiency around 19.8% at room temperature, and clear optical response was measured even at a temperature of 323 K. The two detectors showed similar Johnson-noise limited detectivity. The peak detectivity of the one- and two-stage devices was measured to be 2.15 × 1014 cm·Hz1/02/W and 2.19 × 1014 cm·Hz1/02/W at 80 K, 1.21 × 109 cm·Hz1/02/W and 1.23 × 109 cm·Hz1/02/W at 300 K, respectively. The 300 K background limited infrared performance (BLIP) operation temperature is estimated to be over 140 K.

  8. Development of Two-Stage Stirling Cooler for ASTRO-F

    Science.gov (United States)

    Narasaki, K.; Tsunematsu, S.; Ootsuka, K.; Kyoya, M.; Matsumoto, T.; Murakami, H.; Nakagawa, T.

    2004-06-01

    A two-stage small Stirling cooler has been developed and tested for the infrared astronomical satellite ASTRO-F that is planned to be launched by Japanese M-V rocket in 2005. ASTRO-F has a hybrid cryogenic system that is a combination of superfluid liquid helium (HeII) and two-stage Stirling coolers. The mechanical cooler has a two-stage displacer driven by a linear motor in a cold head and a new linear-ball-bearing system for the piston-supporting structure in a compressor. The linear-ball-bearing supporting system achieves the piston clearance seal, the long piston-stroke operation and the low frequency operation. The typical cooling power is 200 mW at 20 K and the total input power to the compressor and the cold head is below 90 W without driver electronics. The engineering, the prototype and the flight models of the cooler have been fabricated and evaluated to verify the capability for ASTRO-F. This paper describes the design of the cooler and the results from verification tests including cooler performance test, thermal vacuum test, vibration test and lifetime test.

  9. Continuous removal of endocrine disruptors by versatile peroxidase using a two-stage system.

    Science.gov (United States)

    Taboada-Puig, Roberto; Lu-Chau, Thelmo A; Eibes, Gemma; Feijoo, Gumersindo; Moreira, Maria T; Lema, Juan M

    2015-01-01

    The oxidant Mn(3+) -malonate, generated by the ligninolytic enzyme versatile peroxidase in a two-stage system, was used for the continuous removal of endocrine disrupting compounds (EDCs) from synthetic and real wastewaters. One plasticizer (bisphenol-A), one bactericide (triclosan) and three estrogenic compounds (estrone, 17β-estradiol, and 17α-ethinylestradiol) were removed from wastewater at degradation rates in the range of 28-58 µg/L·min, with low enzyme inactivation. First, the optimization of three main parameters affecting the generation of Mn(3+) -malonate (hydraulic retention time as well as Na-malonate and H2 O2 feeding rates) was conducted following a response surface methodology (RSM). Under optimal conditions, the degradation of the EDCs was proven at high (1.3-8.8 mg/L) and environmental (1.2-6.1 µg/L) concentrations. Finally, when the two-stage system was compared with a conventional enzymatic membrane reactor (EMR) using the same enzyme, a 14-fold increase of the removal efficiency was observed. At the same time, operational problems found during EDCs removal in the EMR system (e.g., clogging of the membrane and enzyme inactivation) were avoided by physically separating the stages of complex formation and pollutant oxidation, allowing the system to be operated for a longer period (∼8 h). This study demonstrates the feasibility of the two-stage enzymatic system for removing EDCs both at high and environmental concentrations.

  10. A two-stage Stirling-type pulse tube cryocooler with a cold inertance tube

    Science.gov (United States)

    Gan, Z. H.; Fan, B. Y.; Wu, Y. Z.; Qiu, L. M.; Zhang, X. J.; Chen, G. B.

    2010-06-01

    A thermally coupled two-stage Stirling-type pulse tube cryocooler (PTC) with inertance tubes as phase shifters has been designed, manufactured and tested. In order to obtain a larger phase shift at the low acoustic power of about 2.0 W, a cold inertance tube as well as a cold reservoir for the second stage, precooled by the cold end of the first stage, was introduced into the system. The transmission line model was used to calculate the phase shift produced by the cold inertance tube. Effect of regenerator material, geometry and charging pressure on the performance of the second stage of the two-stage PTC was investigated based on the well known regenerator model REGEN. Experimental results of the two-stage PTC were carried out with an emphasis on the performance of the second stage. A lowest cooling temperature of 23.7 K and 0.50 W at 33.9 K were obtained with an input electric power of 150.0 W and an operating frequency of 40 Hz.

  11. Two-Stage Liver Transplantation with Temporary Porto-Middle Hepatic Vein Shunt

    Directory of Open Access Journals (Sweden)

    Giovanni Varotti

    2010-01-01

    Full Text Available Two-stage liver transplantation (LT has been reported for cases of fulminant liver failure that can lead to toxic hepatic syndrome, or massive hemorrhages resulting in uncontrollable bleeding. Technically, the first stage of the procedure consists of a total hepatectomy with preservation of the recipient's inferior vena cava (IVC, followed by the creation of a temporary end-to-side porto-caval shunt (TPCS. The second stage consists of removing the TPCS and implanting a liver graft when one becomes available. We report a case of a two-stage total hepatectomy and LT in which a temporary end-to-end anastomosis between the portal vein and the middle hepatic vein (TPMHV was performed as an alternative to the classic end-to-end TPCS. The creation of a TPMHV proved technically feasible and showed some advantages compared to the standard TPCS. In cases in which a two-stage LT with side-to-side caval reconstruction is utilized, TPMHV can be considered as a safe and effective alternative to standard TPCS.

  12. Two-stage solar concentrators based on parabolic troughs: asymmetric versus symmetric designs.

    Science.gov (United States)

    Schmitz, Max; Cooper, Thomas; Ambrosetti, Gianluca; Steinfeld, Aldo

    2015-11-20

    While nonimaging concentrators can approach the thermodynamic limit of concentration, they generally suffer from poor compactness when designed for small acceptance angles, e.g., to capture direct solar irradiation. Symmetric two-stage systems utilizing an image-forming primary parabolic concentrator in tandem with a nonimaging secondary concentrator partially overcome this compactness problem, but their achievable concentration ratio is ultimately limited by the central obstruction caused by the secondary. Significant improvements can be realized by two-stage systems having asymmetric cross-sections, particularly for 2D line-focus trough designs. We therefore present a detailed analysis of two-stage line-focus asymmetric concentrators for flat receiver geometries and compare them to their symmetric counterparts. Exemplary designs are examined in terms of the key optical performance metrics, namely, geometric concentration ratio, acceptance angle, concentration-acceptance product, aspect ratio, active area fraction, and average number of reflections. Notably, we show that asymmetric designs can achieve significantly higher overall concentrations and are always more compact than symmetric systems designed for the same concentration ratio. Using this analysis as a basis, we develop novel asymmetric designs, including two-wing and nested configurations, which surpass the optical performance of two-mirror aplanats and are comparable with the best reported 2D simultaneous multiple surface designs for both hollow and dielectric-filled secondaries.

  13. Industrial demonstration plant for the gasification of herb residue by fluidized bed two-stage process.

    Science.gov (United States)

    Zeng, Xi; Shao, Ruyi; Wang, Fang; Dong, Pengwei; Yu, Jian; Xu, Guangwen

    2016-04-01

    A fluidized bed two-stage gasification process, consisting of a fluidized-bed (FB) pyrolyzer and a transport fluidized bed (TFB) gasifier, has been proposed to gasify biomass for fuel gas production with low tar content. On the basis of our previous fundamental study, an autothermal two-stage gasifier has been designed and built for gasify a kind of Chinese herb residue with a treating capacity of 600 kg/h. The testing data in the operational stable stage of the industrial demonstration plant showed that when keeping the reaction temperatures of pyrolyzer and gasifier respectively at about 700 °C and 850 °C, the heating value of fuel gas can reach 1200 kcal/Nm(3), and the tar content in the produced fuel gas was about 0.4 g/Nm(3). The results from this pilot industrial demonstration plant fully verified the feasibility and technical features of the proposed FB two-stage gasification process.

  14. Study on two stage activated carbon/HFC-134a based adsorption chiller

    Science.gov (United States)

    >K Habib,

    2013-06-01

    In this paper, a theoretical analysis on the performance of a thermally driven two-stage four-bed adsorption chiller utilizing low-grade waste heat of temperatures between 50°C and 70°C in combination with a heat sink (cooling water) of 30°C for air-conditioning applications has been described. Activated carbon (AC) of type Maxsorb III/HFC-134a pair has been examined as an adsorbent/refrigerant pair. FORTRAN simulation program is developed to analyze the influence of operating conditions (hot and cooling water temperatures and adsorption/desorption cycle times) on the cycle performance in terms of cooling capacity and COP. The main advantage of this two-stage chiller is that it can be operational with smaller regenerating temperature lifts than other heat-driven single-stage chillers. Simulation results shows that the two-stage chiller can be operated effectively with heat sources of 50°C and 70°C in combination with a coolant at 30°C.

  15. A Two-stage injection-locked magnetron for accelerators with superconducting cavities

    CERN Document Server

    Kazakevich, Grigory; Flanagan, Gene; Marhauser, Frank; Neubauer, Mike; Yakovlev, Vyacheslav; Chase, Brian; Nagaitsev, Sergey; Pasquinelli, Ralph; Solyak, Nikolay; Tupikov, Vitali; Wolff, Daniel

    2013-01-01

    A concept for a two-stage injection-locked CW magnetron intended to drive Superconducting Cavities (SC) for intensity-frontier accelerators has been proposed. The concept considers two magnetrons in which the output power differs by 15-20 dB and the lower power magnetron being frequency-locked from an external source locks the higher power magnetron. The injection-locked two-stage CW magnetron can be used as an RF power source for Fermilab's Project-X to feed separately each of the 1.3 GHz SC of the 8 GeV pulsed linac. We expect output/locking power ratio of about 30-40 dB assuming operation in a pulsed mode with pulse duration of ~ 8 ms and repetition rate of 10 Hz. The experimental setup of a two-stage magnetron utilising CW, S-band, 1 kW tubes operating at pulse duration of 1-10 ms, and the obtained results are presented and discussed in this paper.

  16. Two-stage, self-cycling process for the production of bacteriophages

    Directory of Open Access Journals (Sweden)

    Cooper David G

    2010-11-01

    Full Text Available Abstract Background A two-stage, self-cycling process for the production of bacteriophages was developed. The first stage, containing only the uninfected host bacterium, was operated under self-cycling fermentation (SCF conditions. This automated method, using the derivative of the carbon dioxide evolution rate (CER as the control parameter, led to the synchronization of the host bacterium. The second stage, containing both the host and the phage, was operated using self-cycling infection (SCI with CER and CER-derived data as the control parameters. When each infection cycle was terminated, phages were harvested and a new infection cycle was initiated by adding host cells from the SCF (first stage. This was augmented with fresh medium and the small amount of phages left from the previous cycle initiated the next infection cycle. Both stages were operated independently, except for this short period of time when the SCF harvest was added to the SCI to initiate the next cycle. Results It was demonstrated that this mode of operation resulted in stable infection cycles if the growth of the host cells in the SCF was synchronized. The final phage titers obtained were reproducible among cycles and were as good as those obtained in batch productions performed under the same conditions (medium, temperature, initial multiplicity of infection, etc.. Moreover, phages obtained in different cycles showed no important difference in infectivity. Finally, it was shown that cell synchronization of the host cells in the first stage (SCF not only maintained the volumetric productivity (phages per volume but also led to higher specific productivity (phage per cell per hour in the second stage (SCI. Conclusions Production of bacteriophage T4 in the semi-continuous, automated SCF/SCI system was efficient and reproducible from cycle to cycle. Synchronization of the host in the first stage prior to infection led to improvements in the specific productivity of phages in

  17. Study of the Cupriavidus metallidurans CH34 resistance of selenite and selenate oxy-anions: accumulation, localisation and transformation of selenium; Etude de la resistance de Cupriavidus metallidurans CH34 aux oxyanions selenite et seleniate: accumulation, localisation et transformation du selenium

    Energy Technology Data Exchange (ETDEWEB)

    Avoscan, L

    2007-06-15

    Selenium is an essential trace element for the living organisms but it is very toxic at high concentration. Selenite and selenate oxides, soluble forms, highly toxic and bio-assimilable, are the most prevalent forms in the environment. Some soil micro-organisms play a dominant role and contribute to the natural cycle of selenium. Our study model, Cupriavidus (formerly Ralstonia) metallidurans CH34, a telluric bacterium characteristic of metal-contaminated biotopes, is known to resist selenite by reducing it into elemental selenium, an insoluble and less toxic form of selenium. In order to better understand the mechanisms of selenium reduction in the bacteria, three methods of speciation were combined (XAS (XANES and EXAFS), HPLC-ICP-MS and SDS-PAGEPIXE). They were completed by the direct quantification of selenium accumulated in the bacteria. Speciation analyses highlighted the existence of two mechanisms of reduction of selenium oxides in C. metallidurans CH34. Assimilation transforms selenite and selenate into organic selenium, identified as seleno-methionine and leads to its non-specific incorporation into bacterial proteins (presence of selenious proteins). Detoxication precipitates selenite in nano-particles of elemental selenium. This way of detoxication is not set up after an exposure to selenate although it is nevertheless possible to detect elemental selenium but in very small amount compared to the exposure of selenite. Seleno-diglutathion is detected in bacteria stressed by an exposure to selenate in medium limited in sulphate. Bacteria exposed to selenite accumulate 25 times more selenium than when they are exposed to selenate. The study of mutants resistant to selenite, which do not express the membrane protein DedA, showed that the accumulation of selenium after exposure to selenite is decreased compared with the wild strain meaning probable link between the transport of selenite and the DedA protein. Finally, selenate would use the sulphate permease

  18. A New Soil Infiltration Technology for Decentralized Sewage Treatment: Two-Stage Anaerobic Tank and Soil Trench System

    Institute of Scientific and Technical Information of China (English)

    YE Chun; HU Zhan-Bo; KONG Hai-Nan; WANG Xin-Ze; HE Sheng-Bing

    2008-01-01

    The low removal efficiency of total nitrogen (TN) is one of the main disadvantages of traditional single stage subsurface infiltration system,which combines an anaerobic tank and a soil filter field.In this study,a full-scale,two-stage anaerobic tank and soil trench system was designed and operated to evaluate the feasibility and performances in treating sewage from a school campus for over a one-year monitoring period.The raw sewage was prepared and fed into the first anaerobic tank and second tank by 60% and 40%,respectively.This novel process could decrease chemical oxygen demand with the dichromate method by 89%-96%,suspended solids by 91%-97%,and total phosphorus by 91%-97%.The denitrification was satisfactory in the second stage soil trench,so the removals of TN as well as ammonia nitrogen (NH+4-N) reached 68%-75% and 96%-99%,respectively.It appeared that the removal efficiency of TN in this two-stage anaerobic tank and soil trench system was more effective than that in the single stage soil infiltration system.The effluent met the discharge standard for the sewage treatment plant (GB18918-2002) of China.

  19. Assessing vanadium and arsenic exposure of people living near a petrochemical complex with two-stage dispersion models.

    Science.gov (United States)

    Chio, Chia-Pin; Yuan, Tzu-Hsuen; Shie, Ruei-Hao; Chan, Chang-Chuan

    2014-04-30

    The goal of this study is to demonstrate that it is possible to construct a two-stage dispersion model empirically for the purpose of estimating air pollution levels in the vicinity of petrochemical plants. We studied oil refineries and coal-fired power plants in the No. 6 Naphtha Cracking Complex, an area of 2,603-ha situated on the central west coast of Taiwan. The pollutants targeted were vanadium (V) from oil refineries and arsenic (As) from coal-fired power plants. We applied a backward fitting method to determine emission rates of V and As, with 192 PM10 filters originally collected between 2009 and 2012. Our first-stage model estimated emission rates of V and As (median and 95% confidence intervals at 0.0202 (0.0040-0.1063) and 0.1368 (0.0398-0.4782) g/s, respectively. In our second stage model, the predicted zone-average concentrations showed a strong correlation with V, but a poor correlation with As. Our findings show that two-stage dispersion models are relatively precise for estimating V levels at residents' addresses near the petrochemical complex, but they did not work as well for As levels. In conclusion, our model-based approach can be widely used for modeling exposure to air pollution from industrial areas in countries with limited resources. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Two-stage resection for malignant colonic obstructions: The timing of early resection and possible predictive factors

    Institute of Scientific and Technical Information of China (English)

    Hsiang-Yu Yang; Chang-Chieh Wu; Shu-Wen Jao; Kuo-Feng Hsu; Chen-Ming Mai; Kevin Cheng-Wen Hsiao

    2012-01-01

    AIM:To study potential predictive factors for early radical resection in two-stage resection for left malignant colonic obstruction.METHODS:Thirty-eight cases of left-sided obstructive colon cancer undergoing two-stage operations were reviewed between January 1998 and August 2008.Patients were classified into two groups (n =19 each):early radical resection (interval ≤ 10 d) and late radical resection (interval > 10 d).Baseline demographics,post-diversion outcome,perioperative data,tumor characteristics,outcome and complications were analyzed.RESULTS:The baseline demographics revealed no differences except for less pre-diversion sepsis in the early group (P < 0.001) and more obstruction days in the late group (P =0.009).The mean intervals of early and late radical resections were 7.9 ± 1.3 d and 17.8 ± 5.5 d,respectively (P < 0.001).After diversion,the presence of bowel sounds,flatus,removal of the nasogastric tube and the resumption of oral feeding occurred earlier in the early group.The operation time and duration of hospital stay were both significant reduced in the early group.Complication rates did not differ between groups.CONCLUSION:The earlier recovery of bowel function seems to be predictive of early radical resection.In contrast,pre-diversion sepsis and more obstruction days were predictive of delayed radical resection.

  1. A Two-Stage Algorithm for Origin-Destination Matrices Estimation Considering Dynamic Dispersion Parameter for Route Choice.

    Directory of Open Access Journals (Sweden)

    Yong Wang

    Full Text Available This paper proposes a two-stage algorithm to simultaneously estimate origin-destination (OD matrix, link choice proportion, and dispersion parameter using partial traffic counts in a congested network. A non-linear optimization model is developed which incorporates a dynamic dispersion parameter, followed by a two-stage algorithm in which Generalized Least Squares (GLS estimation and a Stochastic User Equilibrium (SUE assignment model are iteratively applied until the convergence is reached. To evaluate the performance of the algorithm, the proposed approach is implemented in a hypothetical network using input data with high error, and tested under a range of variation coefficients. The root mean squared error (RMSE of the estimated OD demand and link flows are used to evaluate the model estimation results. The results indicate that the estimated dispersion parameter theta is insensitive to the choice of variation coefficients. The proposed approach is shown to outperform two established OD estimation methods and produce parameter estimates that are close to the ground truth. In addition, the proposed approach is applied to an empirical network in Seattle, WA to validate the robustness and practicality of this methodology. In summary, this study proposes and evaluates an innovative computational approach to accurately estimate OD matrices using link-level traffic flow data, and provides useful insight for optimal parameter selection in modeling travelers' route choice behavior.

  2. Preparation and characterization of polysaccharide selenate of tamarind seeds%罗望子多糖硒酸酯的制备及表征

    Institute of Scientific and Technical Information of China (English)

    高义霞; 袁毅君; 周向军; 王风霞; 张继

    2012-01-01

    目的:合成罗望子多糖硒酸酯,并表征其结构特征.方法:在HNO3-BaCl2催化作用下,利用亚硒酸钠合成罗望子多糖硒酸酯,以硒含最为指标对合成工艺进行优选,采用红外吸收光谱、热重分析、CPC等方法对合成产物进行表征.结果:罗望子多糖硒酸酯最佳合成条件为硝酸浓度为0.5%,反应温度80℃,反应时间14 h,此条件下产物硒含量约为22 mg·g-1,结论:合成产物中硒以Se =O的形式存在,且与纯多糖比较,多糖硒酸酯热稳定性和相对分子质量稍有降低,可能是由于酸性反应体系下罗望子多糖稍有降解,同时引入的亚硒酸基对分子结构产生了影响.%Objective: To synthesize and characterize polysaccharide selenate of tamarind seeds. Methods: Under the catalysis of HNO3 - BaCl2, polysaccharide selenate of tamarind seeds was synthesized using sodium selenite. Se content was used as the index of investigation for optimi2ation technology. The resultant products were characterized by infrared spectrometry,thermogravimetric analysis and GPC. Results:The results showed that the optimum synthesis condition were as follows:concentration of nitric acid 0. 5% ,reaction time 14 h and temperature 80 ℃. Se content reached the maximium of 22 mg · g ‐1 . Conclusion: Se exists in the form of Se = 0. The thermal stability and relative molecular weigh of polysaccharide selenate decrease slightly in contrast to pure polysaccharides, possibly due to the partial degradation of polysaccharide selenate and the introduction of sodium selenite.

  3. Two-stage fractionation of polar alkaloids from Rhizoma coptidis by countercurrent chromatography considering the strategy of reactive extraction.

    Science.gov (United States)

    Li, Yang; Cai, Fanfan; Zhang, Min; Zhang, Hongyang; Wang, Yuerong; Hu, Ping

    2015-01-23

    Separation of polar alkaloids by countercurrent chromatography (CCC) is challengeable due to their close partition behaviors in solvent system. In this paper, a two-stage method for isolation of epiberberine, jatrorrhizine, palmatine, coptisine, and berberine from Rhizoma coptidis was presented. The first stage separation performed on CCC was based on the principle of reactive extraction. Trifluoroacetic acid was acted as a modulator to selectively react with alkaloids, which changed their partition coefficients in solvent system. Purified epiberberine and other partially separated targets were eluted by ammonium adjusted mobile phase. In the second stage, four alkaloids were purified in pH-zone-refining CCC mode. All the targets collected were over 97% pure determined by HPLC. The method developed demonstrates performing of reactive extraction on standard CCC as an option for separation of polar alkaloids from medicinal plants.

  4. TEXTURAL AND CHEMICAL CHARACTERISATION OF ACTIVATED CARBONS PREPARED FROM RICE HUSK (ORYZA SATIVA USING A TWO- STAGE ACTIVATION PROCESS

    Directory of Open Access Journals (Sweden)

    JOSEPH G. COLLIN

    2008-12-01

    Full Text Available Activated carbons from agro-industrial wastes; rice husk; were prepared by physical and chemical activation using phosphoric acid as the dehydrating agent. A two-stage activation process method was used; with semi-carbonisation stage at 200oC for 15 minutes as the first stage followed by an activation stage at 500oC for 45 minutes as the second stage. The precursor material with the impregnation agent was exposed straightaway to semi-carbonization and activation temperature unlike the specific temperature progression as reported in the literature. All experiments were conducted in a laboratory scale muffle furnace under static conditions in a self generated atmosphere covering process parameters such as impregnation ratios. We found that by using this method, the AC5 had the highest iodine number and methylene blue adsorption capacity which was 506.6 mg/g and 319.0 mg/g respectively.

  5. Mineral systems and the thermodynamics of selenites and selenates in the oxidation zone of sulfide ores - a review

    Science.gov (United States)

    Charykova, Marina V.; Krivovichev, Vladimir G.

    2016-08-01

    Contemporary mineralogy and geochemistry are concerned with understanding and deciphering processes that occur near the surface of the Earth. These processes are especially important for resolving ecological challenges and developing principles of good environmental management. Selenium oxysalts, selenites and selenates, are relatively rare as minerals; there are presently only 34 known mineral species. Thirty-one "pure" selenites, which contain only selenite anionic groups, are known to occur naturally. The other three minerals each contain two anionic groups: selenate and selenite (schmiederite), selenate and sulphate (olsacherite), and selenate and iodate (carlosruizite). This work is intended to provide a classification of natural selenium oxysalts based on their chemical composition. Selenites belong to a particular mineral system, whose components are chemical elements required to construct the crystal structure of a mineral (species-defining constituents). The number of components represents the minimum number of independent elements necessary to define the composition of the system. All selenites and selenates are divided into two groups: anhydrous selenites (I) and hydrous selenites and selenates (II). The paper also presents systematized data published on the thermodynamics of selenites, which are formed in the weathering zone of sulfide and selenide ores, and determines approaches to the quantitative physicochemical modeling of formation conditions. The Eh-pH diagrams of the Me-Se-H2O systems (Me = Cu, Co, Ni, Fe, Zn, Ca, Al) were calculated and plotted for the average contents of these elements in aqueous weathering solutions in sulfide deposit oxidation zones.

  6. Biological removal of selenate and ammonium by activated sludge in a sequencing batch reactor.

    Science.gov (United States)

    Mal, J; Nancharaiah, Y V; van Hullebusch, E D; Lens, P N L

    2017-04-01

    Wastewaters contaminated by both selenium and ammonium need to be treated prior to discharge into natural water bodies, but there are no studies on the simultaneous removal of selenium and ammonium. A sequencing batch reactor (SBR) was inoculated with activated sludge and operated for 90days. The highest ammonium removal efficiency achieved was 98%, while the total nitrogen removal was 75%. Nearly a complete chemical oxygen demand removal efficiency was attained after 16days of operation, whereas complete selenate removal was achieved only after 66days. The highest total Se removal efficiency was 97%. Batch experiments showed that the total Se in the aqueous phase decreased by 21% with increasing initial ammonium concentration from 50 to 100mgL(-1). This study showed that SBR can remove both selenate and ammonium via, respectively, bioreduction and partial nitrification-denitrification and thus offer possibilities for treating selenium and ammonium contaminated effluents.

  7. Acquisition of nonlinear forward optics in generative models: two-stage "downside-up" learning for occluded vision.

    Science.gov (United States)

    Tajima, Satohiro; Watanabe, Masataka

    2011-03-01

    We propose a two-stage learning method which implements occluded visual scene analysis into a generative model, a type of hierarchical neural network with bi-directional synaptic connections. Here, top-down connections simulate forward optics to generate predictions for sensory driven low-level representation, whereas bottom-up connections function to send the prediction error, the difference between the sensory based and the predicted low-level representation, to higher areas. The prediction error is then used to update the high-level representation to obtain better agreement with the visual scene. Although the actual forward optics is highly nonlinear and the accuracy of simulated forward optics is crucial for these types of models, the majority of previous studies have only investigated linear and simplified cases of forward optics. Here we take occluded vision as an example of nonlinear forward optics, where an object in front completely masks out the object behind. We propose a two-staged learning method inspired by the staged development of infant visual capacity. In the primary learning stage, a minimal set of object basis is acquired within a linear generative model using the conventional unsupervised learning scheme. In the secondary learning stage, an auxiliary multi-layer neural network is trained to acquire nonlinear forward optics by supervised learning. The important point is that the high-level representation of the linear generative model serves as the input and the sensory driven low-level representation provides the desired output. Numerical simulations show that occluded visual scene analysis can indeed be implemented by the proposed method. Furthermore, considering the format of input to the multi-layer network and analysis of hidden-layer units leads to the prediction that whole object representation of partially occluded objects, together with complex intermediate representation as a consequence of nonlinear transformation from non-occluded to

  8. Two-Stage Power Factor Corrected Power Supplies: The Low Component-Stress Approach

    DEFF Research Database (Denmark)

    Petersen, Lars; Andersen, Michael Andreas E.

    2002-01-01

    The discussion concerning the use of single-stage contra two-stage PFC solutions has been going on for the last decade and it continues. The purpose of this paper is to direct the focus back on how the power is processed and not so much as to the number of stages or the amount of power processed....... The performance of the basic DC/DC topologies is reviewed with focus on the component stress. The knowledge obtained in this process is used to review some examples of the alternative PFC solutions and compare these solutions with the basic twostage PFC solution....

  9. Generalized Yule-walker and two-stage identification algorithms for dual-rate systems

    Institute of Scientific and Technical Information of China (English)

    Feng DING

    2006-01-01

    In this paper, two approaches are developed for directly identifying single-rate models of dual-rate stochastic systems in which the input updating frequency is an integer multiple of the output sampling frequency. The first is the generalized Yule-Walker algorithm and the second is a two-stage algorithm based on the correlation technique. The basic idea is to directly identify the parameters of underlying single-rate models instead of the lifted models of dual-rate systems from the dual-rate input-output data, assuming that the measurement data are stationary and ergodic. An example is given.

  10. Two-stage bargaining with coverage extension in a dual labour market

    DEFF Research Database (Denmark)

    Roberts, Mark A.; Stæhr, Karsten; Tranæs, Torben

    2000-01-01

    in extending coverage of a minimum wage to the non-union sector. Furthermore, the union sector does not seek to increase the non-union wage to a level above the market-clearing wage. In fact, it is optimal for the union sector to impose a market-clearing wage on the non-union sector. Finally, coverage......This paper studies coverage extension in a simple general equilibrium model with a dual labour market. The union sector is characterized by two-stage bargaining whereas the firms set wages in the non-union sector. In this model firms and unions of the union sector have a commonality of interest...

  11. SQL/JavaScript Hybrid Worms As Two-stage Quines

    CERN Document Server

    Orlicki, José I

    2009-01-01

    Delving into present trends and anticipating future malware trends, a hybrid, SQL on the server-side, JavaScript on the client-side, self-replicating worm based on two-stage quines was designed and implemented on an ad-hoc scenario instantiating a very common software pattern. The proof of concept code combines techniques seen in the wild, in the form of SQL injections leading to cross-site scripting JavaScript inclusion, and seen in the laboratory, in the form of SQL quines propa- gated via RFIDs, resulting in a hybrid code injection. General features of hybrid worms are also discussed.

  12. Performance of the SITP 35K two-stage Stirling cryocooler

    Science.gov (United States)

    Liu, Dongyu; Li, Ao; Li, Shanshan; Wu, Yinong

    2010-04-01

    This paper presents the design, development, optimization experiment and performance of the SITP two-stage Stirling cryocooler. The geometry size of the cooler, especially the diameter and length of the regenerator were analyzed. Operating parameters by experiments were optimized to maximize the second stage cooling performance. In the test the cooler was operated at various drive frequency, phase shift between displacer and piston, fill pressure. The experimental results indicate that the cryocooler has a higher efficiency with a performance of 0.85W at 35K with a compressor input power of 56W at a phase shift of 65°, an operating frequency of 40Hz, 1MPa fill pressure.

  13. Two-Stage Bulk Electron Heating in the Diffusion Region of Anti-Parallel Symmetric Reconnection

    CERN Document Server

    Le, Ari; Daughton, William

    2016-01-01

    Electron bulk energization in the diffusion region during anti-parallel symmetric reconnection entails two stages. First, the inflowing electrons are adiabatically trapped and energized by an ambipolar parallel electric field. Next, the electrons gain energy from the reconnection electric field as they undergo meandering motion. These collisionless mechanisms have been decribed previously, and they lead to highly-structured electron velocity distributions. Nevertheless, a simplified control-volume analysis gives estimates for how the net effective heating scales with the upstream plasma conditions in agreement with fully kinetic simulations and spacecraft observations.

  14. Use of two-stage membrane countercurrent cascade for natural gas purification from carbon dioxide

    Science.gov (United States)

    Kurchatov, I. M.; Laguntsov, N. I.; Karaseva, M. D.

    2016-09-01

    Membrane technology scheme is offered and presented as a two-stage countercurrent recirculating cascade, in order to solve the problem of natural gas dehydration and purification from CO2. The first stage is a single divider, and the second stage is a recirculating two-module divider. This scheme allows natural gas to be cleaned from impurities, with any desired degree of methane extraction. In this paper, the optimal values of the basic parameters of the selected technological scheme are determined. An estimation of energy efficiency was carried out, taking into account the energy consumption of interstage compressor and methane losses in energy units.

  15. Forecasting long memory series subject to structural change: A two-stage approach

    DEFF Research Database (Denmark)

    Papailias, Fotis; Dias, Gustavo Fruet

    2015-01-01

    A two-stage forecasting approach for long memory time series is introduced. In the first step, we estimate the fractional exponent and, by applying the fractional differencing operator, obtain the underlying weakly dependent series. In the second step, we produce multi-step-ahead forecasts...... for the weakly dependent series and obtain their long memory counterparts by applying the fractional cumulation operator. The methodology applies to both stationary and nonstationary cases. Simulations and an application to seven time series provide evidence that the new methodology is more robust to structural...... change and yields good forecasting results....

  16. Space Station Freedom carbon dioxide removal assembly two-stage rotary sliding vane pump

    Science.gov (United States)

    Matteau, Dennis

    1992-07-01

    The design and development of a positive displacement pump selected to operate as an essential part of the carbon dioxide removal assembly (CDRA) are described. An oilless two-stage rotary sliding vane pump was selected as the optimum concept to meet the CDRA application requirements. This positive displacement pump is characterized by low weight and small envelope per unit flow, ability to pump saturated gases and moderate amount of liquid, small clearance volumes, and low vibration. It is easily modified to accommodate several stages on a single shaft optimizing space and weight, which makes the concept ideal for a range of demanding space applications.

  17. Two-Stage Maximum Likelihood Estimation (TSMLE for MT-CDMA Signals in the Indoor Environment

    Directory of Open Access Journals (Sweden)

    Sesay Abu B

    2004-01-01

    Full Text Available This paper proposes a two-stage maximum likelihood estimation (TSMLE technique suited for multitone code division multiple access (MT-CDMA system. Here, an analytical framework is presented in the indoor environment for determining the average bit error rate (BER of the system, over Rayleigh and Ricean fading channels. The analytical model is derived for quadrature phase shift keying (QPSK modulation technique by taking into account the number of tones, signal bandwidth (BW, bit rate, and transmission power. Numerical results are presented to validate the analysis, and to justify the approximations made therein. Moreover, these results are shown to agree completely with those obtained by simulation.

  18. Two-Stage Electric Vehicle Charging Coordination in Low Voltage Distribution Grids

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2014-01-01

    Increased environmental awareness in the recent years has encouraged rapid growth of renewable energy sources (RESs); especially solar PV and wind. One of the effective solutions to compensate intermittencies in generation from the RESs is to enable consumer participation in demand response (DR......). Being a sizable rated element, electric vehicles (EVs) can offer a great deal of demand flexibility in future intelligent grids. This paper first investigates and analyzes driving pattern and charging requirements of EVs. Secondly, a two-stage charging algorithm, namely local adaptive control...

  19. Health care planning and education via gaming-simulation: a two-stage experiment.

    Science.gov (United States)

    Gagnon, J H; Greenblat, C S

    1977-01-01

    A two-stage process of gaming-simulation design was conducted: the first stage of design concerned national planning for hemophilia care; the second stage of design was for gaming-simulation concerning the problems of hemophilia patients and health care providers. The planning design was intended to be adaptable to large-scale planning for a variety of health care problems. The educational game was designed using data developed in designing the planning game. A broad range of policy-makers participated in the planning game.

  20. Influence of capacity- and time-constrained intermediate storage in two-stage food production systems

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter; Gaalman, Gerard

    2007-01-01

    In food processing, two-stage production systems with a batch processor in the first stage and packaging lines in the second stage are common and mostly separated by capacity- and time-constrained intermediate storage. This combination of constraints is common in practice, but the literature hardly...... of systems like this. Contrary to the common sense in operations management, the LPT rule is able to maximize the total production volume per day. Furthermore, we show that adding one tank has considerable effects. Finally, we conclude that the optimal setup frequency for batches in the first stage...

  1. The global stability of a delayed predator-prey system with two stage-structure

    Energy Technology Data Exchange (ETDEWEB)

    Wang Fengyan [College of Science, Jimei University, Xiamen Fujian 361021 (China)], E-mail: wangfy68@163.com; Pang Guoping [Department of Mathematics and Computer Science, Yulin Normal University, Yulin Guangxi 537000 (China)

    2009-04-30

    Based on the classical delayed stage-structured model and Lotka-Volterra predator-prey model, we introduce and study a delayed predator-prey system, where prey and predator have two stages, an immature stage and a mature stage. The time delays are the time lengths between the immature's birth and maturity of prey and predator species. Results on global asymptotic stability of nonnegative equilibria of the delay system are given, which generalize and suggest that good continuity exists between the predator-prey system and its corresponding stage-structured system.

  2. A Two-Stage Assembly-Type Flowshop Scheduling Problem for Minimizing Total Tardiness

    Directory of Open Access Journals (Sweden)

    Ju-Yong Lee

    2016-01-01

    Full Text Available This research considers a two-stage assembly-type flowshop scheduling problem with the objective of minimizing the total tardiness. The first stage consists of two independent machines, and the second stage consists of a single machine. Two types of components are fabricated in the first stage, and then they are assembled in the second stage. Dominance properties and lower bounds are developed, and a branch and bound algorithm is presented that uses these properties and lower bounds as well as an upper bound obtained from a heuristic algorithm. The algorithm performance is evaluated using a series of computational experiments on randomly generated instances and the results are reported.

  3. Two-stage continuous fermentation of Saccharomycopsis fibuligeria and Candida utilis.

    Science.gov (United States)

    Admassu, W; Korus, R A; Heimsch, R C

    1983-11-01

    Biomass production and carbohydrate reduction were determined for a two-stage continuous fermentation process with a simulated potato processing waste feed. The amylolytic yeast Saccharomycopsis fibuligera was grown in the first stage and a mixed culture of S. fibuligera and Candida utilis was maintained in the second stage. All conditions for the first and second stages were fixed except the flow of medium to the second stage was varied. Maximum biomass production occurred at a second stage dilution rate, D(2), of 0.27 h (-1). Carbohydrate reduction was inversely proportional to D(2), between 0.10 and 0.35 h (-1).

  4. Structural requirements and basic design concepts for a two-stage winged launcher system (Saenger)

    Science.gov (United States)

    Kuczera, H.; Keller, K.; Kunz, R.

    1988-10-01

    An evaluation is made of materials and structures technologies deemed capable of increasing the mass fraction-to-orbit of the Saenger two-stage launcher system while adequately addressing thermal-control and cryogenic fuel storage insulation problems. Except in its leading edges, nose cone, and airbreathing propulsion system air intakes, Ti alloy-based materials will be the basis of the airframe primary structure. Lightweight metallic thermal-protection measures will be employed. Attention is given to the design of the large lower stage element of Saenger.

  5. An Investigation on the Formation of Carbon Nanotubes by Two-Stage Chemical Vapor Deposition

    Directory of Open Access Journals (Sweden)

    M. S. Shamsudin

    2012-01-01

    Full Text Available High density of carbon nanotubes (CNTs has been synthesized from agricultural hydrocarbon: camphor oil using a one-hour synthesis time and a titanium dioxide sol gel catalyst. The pyrolysis temperature is studied in the range of 700–900°C at increments of 50°C. The synthesis process is done using a custom-made two-stage catalytic chemical vapor deposition apparatus. The CNT characteristics are investigated by field emission scanning electron microscopy and micro-Raman spectroscopy. The experimental results showed that structural properties of CNT are highly dependent on pyrolysis temperature changes.

  6. Kuidas sa juhina verinoore inimese silmis paistad? / Daniil Aal, Selene Gnadenteich, Mariliis Õun... [jt.

    Index Scriptorium Estoniae

    2010-01-01

    Küsimustele, mis jäi töövarjupäevast kõige eredamalt meelde ning mida oma tööelus samamoodi või teisiti teha, vastavad SEB varahalduse juhi Reet Raiduri vari Daniil Aal, ERRi esimehe Margus Allikmaa vari Selene Gnadenteich, Linnateatri direktori Raivo Põldmaa vari Mariliis Õun, Rate Solutions OÜ juhi Andrei Korobeiniku vari Mirjam Pärtel ning justiitsminister Rein Langi vari Signe Sildever

  7. Effect of selenate supplementation on glycoalkaloid content of potato (Solanum tuberosum L.).

    Science.gov (United States)

    Turakainen, Marja; Väänänen, Tiina; Anttila, Katja; Ollilainen, Velimatti; Hartikainen, Helinä; Seppänen, Mervi

    2004-11-17

    Potatoes (Solanum tuberosum L.) supplemented with increasing amounts of sodium selenate were analyzed for glycoalkaloid (GA) content. GAs were extracted with 5% acetic acid from freeze-dried tubers of two potato cultivars, Satu and Sini, harvested 10 weeks after planting as immature. The GAs alpha-solanine and alpha-chaconine were quantified by reverse-phase high-performance liquid chromatography (RP-HPLC) with diode array detection. Two independent experiments were performed. In the first experiment, the total GA concentration +/- standard error of the tubers ranged between 105 +/- 9 and 124 +/- 10 mg kg(-1) fresh weight in Satu and between 194 +/- 26 and 228 +/- 10 mg kg(-1) fresh weight in Sini. The ratio of alpha-solanine to alpha-chaconine was 0.2 in Satu and 0.5-0.6 in Sini. In the second experiment, the total GA concentration +/- standard error was 75 +/- 4 to 96 +/- 11 mg kg(-1) fresh weight, and the ratio of alpha-solanine to alpha-chaconine was 0.3-0.4 in Satu. A high sodium selenate supplementation (0.9 mg of Se kg(-1) quartz sand) slightly decreased the GA content in Satu, but this decrease was not statistically significant. Furthermore, at this addition level the Se concentration increased to a very high level of 20 microg g(-1) dry weight, which cannot be recommended for human consumption. In both experiments, the Se concentration in tubers increased with increasing sodium selenate application levels. Our results show that acceptable application levels of selenate did not have an effect on the GA concentration in immature potato tubers.

  8. Chromate and selenate hydrocalumite solid solutions and their applications in waste treatment

    Institute of Scientific and Technical Information of China (English)

    ZHANG Min; Eric J. Reardon

    2005-01-01

    Hydrocalumite, a calcium aluminate hydrate phase, consists of positively-charged structure units, and is therefore an ideal candidate for accommodating anionic contaminants. In this study, a series of batch experiments was carried out to examine the uptake of chromate and selenate by hydrocalumite. To determine the uptake capacity and long-term stability, hydrocalumite solid solutions between chromate/selenate and hydroxyl were synthesized over a reaction time of more than one year. At a ratio of water to initial solids added (CaAl2O4+CaO) of 75: 1, the maximum uptake capacities were over 77 and 114 g/kg for Cr and Se, respectively.These values are very close to the theoretical uptake capacities of chromate and selenate hydrocalumite end-members (81 and 118 g/kg, respectively). The oxyanion removal efficiency from solution was above 95%. Due to the high uptake capacity and anion removal efficiency of hydrocalumites, their application in wastewater treatment is promising. Hydrocalumites are also important hydration products of cementitious materials and the long-term stability of these phases is of significance for application in solidification/stabilization technology.

  9. Effect of Selenate on Viability and Selenomethionine Accumulation of Chlorella sorokiniana Grown in Batch Culture

    Science.gov (United States)

    Vílchez, Carlos; Torronteras, Rafael; Vigara, Javier; Gómez-Jacinto, Veronica; Janzer, Nora; Gómez-Ariza, José-Luis; Márová, Ivana

    2014-01-01

    The aim of this work was to study the effect of Se(+VI) on viability, cell morphology, and selenomethionine accumulation of the green alga Chlorella sorokiniana grown in batch cultures. Culture exposed to sublethal Se concentrations of 40 mg·L−1 (212 μM) decreased growth rates for about 25% compared to control. A selenate EC50 value of 45 mg·L−1 (238.2 μM) was determined. Results showed that chlorophyll and carotenoids contents were not affected by Se exposure, while oxygen evolution decreased by half. Ultrastructural studies revealed granular stroma, fingerprint-like appearance of thylakoids which did not compromise cell activity. Unlike control cultures, SDS PAGE electrophoresis of crude extracts from selenate-exposed cell cultures revealed appearance of a protein band identified as 53 kDa Rubisco large subunit of Chlorella sorokiniana, suggesting that selenate affects expression of the corresponding chloroplast gene as this subunit is encoded in the chloroplast DNA. Results revealed that the microalga was able to accumulate up to 140 mg·kg−1 of SeMet in 120 h of cultivation. This paper shows that Chlorella sorokiniana biomass can be enriched in the high value aminoacid SeMet in batch cultures, while keeping photochemical viability and carbon dioxide fixation activity intact, if exposed to suitable sublethal concentrations of Se. PMID:24688385

  10. The intensity of tyrosine nitration is associated with selenite and selenate toxicity in Brassica juncea L.

    Science.gov (United States)

    Molnár, Árpád; Feigl, Gábor; Trifán, Vanda; Ördög, Attila; Szőllősi, Réka; Erdei, László; Kolbert, Zsuzsanna

    2017-08-21

    Selenium phytotoxicity involves processes like reactive nitrogen species overproduction and nitrosative protein modifications. This study evaluates the toxicity of two selenium forms (selenite and selenate at 0µM, 20µM, 50µM and 100µM concentrations) and its correlation with protein tyrosine nitration in the organs of hydroponically grown Indian mustard (Brassica juncea L.). Selenate treatment resulted in large selenium accumulation in both Brassica organs, while selenite showed slight root-to-shoot translocation resulting in a much lower selenium accumulation in the shoot. Shoot and root growth inhibition and cell viability loss revealed that Brassica tolerates selenate better than selenite. Results also show that relative high amounts of selenium are able to accumulate in Brassica leaves without obvious visible symptoms such as chlorosis or necrosis. The more severe phytotoxicity of selenite was accompanied by more intense protein tyrosine nitration as well as alterations in nitration pattern suggesting a correlation between the degree of Se forms-induced toxicities and nitroproteome size, composition in Brassica organs. These results imply the possibility of considering protein tyrosine nitration as novel biomarker of selenium phytotoxicity, which could help the evaluation of asymptomatic selenium stress of plants. Copyright © 2017. Published by Elsevier Inc.

  11. Fabrication of CIGS thin films by using spray pyrolysis and post-selenization

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seong Yeon; Kim, Jun Ho [University of Incheon, Incheon (Korea, Republic of)

    2012-06-15

    We fabricated Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (x: 0 ∼ 0.4) thin films by using ultrasonic spray pyrolysis and post-selenization. First, we made Cu(In{sub 1-x}Ga{sub x})S{sub 2} (x: 0 ∼ 0.4) films by ultrasonic spray pyrolysis under an air environment. Then, we converted as-sprayed Cu(In{sub 1-x}Ga{sub x})S{sub 2} (CIGS) films to Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (CIGSe) films through post-selenization. For all Ga fractions, the sprayed CIGS films were well recrystallized into poly-crystalline CIGSe films with a dominant (112) texture, which was confirmed by X-ray diffraction, Raman spectroscopy and energy dispersive X-ray analyses. This result indicates that CIGSe films with any amount of Ga substitution can be made by converting sprayed CIGS to CIGSe with post-selenization.

  12. Effect of Selenate on Viability and Selenomethionine Accumulation of Chlorella sorokiniana Grown in Batch Culture

    Directory of Open Access Journals (Sweden)

    Živan Gojkovic

    2014-01-01

    Full Text Available The aim of this work was to study the effect of Se(+VI on viability, cell morphology, and selenomethionine accumulation of the green alga Chlorella sorokiniana grown in batch cultures. Culture exposed to sublethal Se concentrations of 40 mg·L−1 (212 μM decreased growth rates for about 25% compared to control. A selenate EC50 value of 45 mg·L−1 (238.2 μM was determined. Results showed that chlorophyll and carotenoids contents were not affected by Se exposure, while oxygen evolution decreased by half. Ultrastructural studies revealed granular stroma, fingerprint-like appearance of thylakoids which did not compromise cell activity. Unlike control cultures, SDS PAGE electrophoresis of crude extracts from selenate-exposed cell cultures revealed appearance of a protein band identified as 53 kDa Rubisco large subunit of Chlorella sorokiniana, suggesting that selenate affects expression of the corresponding chloroplast gene as this subunit is encoded in the chloroplast DNA. Results revealed that the microalga was able to accumulate up to 140 mg·kg−1 of SeMet in 120 h of cultivation. This paper shows that Chlorella sorokiniana biomass can be enriched in the high value aminoacid SeMet in batch cultures, while keeping photochemical viability and carbon dioxide fixation activity intact, if exposed to suitable sublethal concentrations of Se.

  13. Modeling sea level changes and geodetic variations by glacial isostasy: the improved SELEN code

    CERN Document Server

    Spada, Giorgio; Galassi, Gaia; Colleoni, Florence

    2012-01-01

    We describe the basic features of SELEN, an open source Fortran 90 program for the numerical solution of the so-called "Sea Level Equation" for a spherical, layered, non-rotating Earth with Maxwell viscoelastic rheology. The Sea Level Equation was introduced in the 70s to model the sea level variations in response to the melting of late-Pleistocene ice-sheets, but it can be also employed for predictions of geodetic quantities such as vertical and horizontal surface displacements and gravity variations on a global and a regional scale. SELEN (acronym of SEa Level EquatioN solver) is particularly oriented to scientists at their first approach to the glacial isostatic adjustment problem and, according to our experience, it can be successfully used in teaching. The current release (2.9) considerably improves the previous versions of the code in terms of computational efficiency, portability and versatility. In this paper we describe the essentials of the theory behind the Sea Level Equation, the purposes of SELEN...

  14. A Two-stage Optimal Network Reconfiguration Approach for Minimizing Energy Loss of Distribution Networks Using Particle Swarm Optimization Algorithm

    Directory of Open Access Journals (Sweden)

    Wei-Tzer Huang

    2015-12-01

    Full Text Available This study aimed to minimize energy losses in traditional distribution networks and microgrids through a network reconfiguration and phase balancing approach. To address this problem, an algorithm composed of a multi-objective function and operation constraints is proposed. Network connection matrices based on graph theory and the backward/forward sweep method are used to analyze power flow. A minimizing energy loss approach is developed for network reconfiguration and phase balancing, and the particle swarm optimization (PSO algorithm is adopted to solve this optimal combination problem. The proposed approach is tested on the IEEE 37-bus test system and the first outdoor microgrid test bed established by the Institute of Nuclear Energy Research (INER in Taiwan. Simulation results demonstrate that the proposed two-stage approach can be applied in network reconfiguration to minimize energy loss.

  15. A two-stage algorithm for designing phase I cancer clinical trials for two new molecular entities.

    Science.gov (United States)

    Su, Zheng

    2010-01-01

    The continual reassessment method (CRM) and subsequent developments of the Bayesian approach provide important tools for the design of Phase I cancer clinical trials for a new molecular entity. In recent years the idea of developing a treatment composed of two molecular entities has been proposed. For example, for some tumor types there may be two signaling pathways, both of which need to be blocked simultaneously using two molecules to achieve therapeutic benefit. A two-stage Bayesian and likelihood based algorithm is introduced herein for designing Phase I cancer clinical trials for two new molecular entities. It starts with a modified CRM approach in the first stage and makes use of the accumulated data from the first stage to provide likelihood estimates of model parameters for use in the second stage. Copyright (c) 2009 Elsevier Inc. All rights reserved.

  16. Two-stage crossed beam cooling with ⁶Li and ¹³³Cs atoms in microgravity.

    Science.gov (United States)

    Luan, Tian; Yao, Hepeng; Wang, Lu; Li, Chen; Yang, Shifeng; Chen, Xuzong; Ma, Zhaoyuan

    2015-05-04

    Applying the direct simulation Monte Carlo (DSMC) method developed for ultracold Bose-Fermi mixture gases research, we study the sympathetic cooling process of 6Li and 133Cs atoms in a crossed optical dipole trap. The obstacles to producing 6Li Fermi degenerate gas via direct sympathetic cooling with 133Cs are also analyzed, by which we find that the side-effect of the gravity is one of the main obstacles. Based on the dynamic nature of 6Li and 133Cs atoms, we suggest a two-stage cooling process with two pairs of crossed beams in microgravity environment. According to our simulations, the temperature of 6Li atoms can be cooled to T = 29.5 pK and T/TF = 0.59 with several thousand atoms, which propose a novel way to get ultracold fermion atoms with quantum degeneracy near pico-Kelvin.

  17. Separation of heavy metals from salts in multicomponent gas by a two-stage dust collection technique

    Energy Technology Data Exchange (ETDEWEB)

    Okada, Takashi, E-mail: t-okada@u-fukui.ac.jp [Laboratory of Solid Waste Disposal Engineering, Graduate School of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Headquarters for Innovative Society-Academic cooperation, Fukui University, Bunkyo 3-9-1, Fukui 910-8507 (Japan); Nishimoto, Kaoru [Laboratory of Solid Waste Disposal Engineering, Graduate School of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan)

    2013-06-15

    Highlights: • A heavy metal separation method from salts in a multicomponent gas was studied. • A two-stage dust collection technique was used for the metal separation. • The first stage dust collection at 800 °C was better for the separation. • A reductive atmosphere also promoted the efficiency of the separation. •The collected heavy metals were extracted with water, acid, or CH{sub 3}COONH{sub 4} solution. -- Abstract: A Pb and Zn separation method from salts (Na, K, and Cl) in a simulated multicomponent gas generated by the incineration fly ash melting is studied. The heavy metals are separated using a two-stage dust collection technique. A standard reagents mixture is volatilized by heating in a lab-scale reactor to generate the simulated multicomponent gas. The volatilized salts in the gas are condensed and collected by a filter at a high temperature (600–800 °C), allowing Pb and Zn to pass through the filter as gaseous species. The gaseous heavy metals are condensed by lowering their temperature to 100 °C and collected. The metal separation is promoted by elevating the temperature used in the first-stage dust collection to 800 °C and maintaining a reductive atmosphere in the reactor. Subsequently, a sequential chemical extraction is performed on the obtained materials to evaluate the metals leaching characteristics from the materials. In the separated salts to be landfilled, a portion of toxic metals such as Pb, Cd, As, and Cr remain as water-soluble compounds. The separated Pb and Zn, to be extracted and recovered with precipitation for the metal enrichment, can be extracted using water, acid (pH 3), or CH{sub 3}COONH{sub 4} solution (1 M)

  18. Complex Dynamical Behavior of a Two-Stage Colpitts Oscillator with Magnetically Coupled Inductors

    Directory of Open Access Journals (Sweden)

    V. Kamdoum Tamba

    2014-01-01

    Full Text Available A five-dimensional (5D controlled two-stage Colpitts oscillator is introduced and analyzed. This new electronic oscillator is constructed by considering the well-known two-stage Colpitts oscillator with two further elements (coupled inductors and variable resistor. In contrast to current approaches based on piecewise linear (PWL model, we propose a smooth mathematical model (with exponential nonlinearity to investigate the dynamics of the oscillator. Several issues, such as the basic dynamical behaviour, bifurcation diagrams, Lyapunov exponents, and frequency spectra of the oscillator, are investigated theoretically and numerically by varying a single control resistor. It is found that the oscillator moves from the state of fixed point motion to chaos via the usual paths of period-doubling and interior crisis routes as the single control resistor is monitored. Furthermore, an experimental study of controlled Colpitts oscillator is carried out. An appropriate electronic circuit is proposed for the investigations of the complex dynamics behaviour of the system. A very good qualitative agreement is obtained between the theoretical/numerical and experimental results.

  19. Optimization of Two-Stage Peltier Modules: Structure and Exergetic Efficiency

    Directory of Open Access Journals (Sweden)

    Cesar Ramirez-Lopez

    2012-08-01

    Full Text Available In this paper we undertake the theoretical analysis of a two-stage semiconductor thermoelectric module (TEM which contains an arbitrary and different number of thermocouples, n1 and n2, in each stage (pyramid-styled TEM. The analysis is based on a dimensionless entropy balance set of equations. We study the effects of n1 and n2, the flowing electric currents through each stage, the applied temperatures and the thermoelectric properties of the semiconductor materials on the exergetic efficiency. Our main result implies that the electric currents flowing in each stage must necessarily be different with a ratio about 4.3 if the best thermal performance and the highest temperature difference possible between the cold and hot side of the device are pursued. This fact had not been pointed out before for pyramid-styled two stage TEM. The ratio n1/n2 should be about 8.

  20. Study on a high capacity two-stage free piston Stirling cryocooler working around 30 K

    Science.gov (United States)

    Wang, Xiaotao; Zhu, Jian; Chen, Shuai; Dai, Wei; Li, Ke; Pang, Xiaomin; Yu, Guoyao; Luo, Ercang

    2016-12-01

    This paper presents a two-stage high-capacity free-piston Stirling cryocooler driven by a linear compressor to meet the requirement of the high temperature superconductor (HTS) motor applications. The cryocooler system comprises a single piston linear compressor, a two-stage free piston Stirling cryocooler and a passive oscillator. A single stepped displacer configuration was adopted. A numerical model based on the thermoacoustic theory was used to optimize the system operating and structure parameters. Distributions of pressure wave, phase differences between the pressure wave and the volume flow rate and different energy flows are presented for a better understanding of the system. Some characterizing experimental results are presented. Thus far, the cryocooler has reached a lowest cold-head temperature of 27.6 K and achieved a cooling power of 78 W at 40 K with an input electric power of 3.2 kW, which indicates a relative Carnot efficiency of 14.8%. When the cold-head temperature increased to 77 K, the cooling power reached 284 W with a relative Carnot efficiency of 25.9%. The influences of different parameters such as mean pressure, input electric power and cold-head temperature are also investigated.

  1. A separate two-stage pulse tube cooler working at liquid helium temperature

    Institute of Scientific and Technical Information of China (English)

    QIU Limin; HE Yonglin; GAN Zhihua; WAN Laihong; CHEN Guobang

    2005-01-01

    A novel 4 K separate two-stage pulse tube cooler (PTC) was designed and tested. The cooler consists of two separate pulse tube coolers, in which the cold end of the first stage regenerator is thermally connected with the middle part of the second regenerator. Compared to the traditional coupled multi-stage pulse tube cooler, the mutual interference between stages can be significantly eliminated. The lowest refrigeration temperature obtained at the first stage pulse tube was 13.8 K. This is a new record for single stage PTC. With two compressors and two rotary valves driving mode, the separate two-stage PTC obtained a refrigeration temperature of 2.5 K at the second stage. Cooling capacities of 508 mW at 4.2 K and 15 W at 37.5 K were achieved simultaneously. A one-compressor and one-rotary valve driving mode has been proposed to further simplify the structure of separate type PTC.

  2. Two-Stage Single-Compartment Models to Evaluate Dissolution in the Lower Intestine.

    Science.gov (United States)

    Markopoulos, Constantinos; Vertzoni, Maria; Symillides, Mira; Kesisoglou, Filippos; Reppas, Christos

    2015-09-01

    The purpose was to propose two-stage single-compartment models for evaluating dissolution characteristics in distal ileum and ascending colon, under conditions simulating the bioavailability and bioequivalence studies in fasted and fed state by using the mini-paddle and the compendial flow-through apparatus (closed-loop mode). Immediate release products of two highly dosed active pharmaceutical ingredients (APIs), sulfasalazine and L-870,810, and one mesalamine colon targeting product were used for evaluating their usefulness. Change of medium composition simulating the conditions in distal ileum (SIFileum ) to a medium simulating the conditions in ascending colon in fasted state and in fed state was achieved by adding an appropriate solution in SIFileum . Data with immediate release products suggest that dissolution in lower intestine is substantially different than in upper intestine and is affected by regional pH differences > type/intensity of fluid convection > differences in concentration of other luminal components. Asacol® (400 mg/tab) was more sensitive to type/intensity of fluid convection. In all the cases, data were in line with available human data. Two-stage single-compartment models may be useful for the evaluation of dissolution in lower intestine. The impact of type/intensity of fluid convection and viscosity of media on luminal performance of other APIs and drug products requires further exploration.

  3. Simultaneous bile duct and portal venous branch ligation in two-stage hepatectomy

    Institute of Scientific and Technical Information of China (English)

    Hiroya Iida; Chiaki Yasui; Tsukasa Aihara; Shinichi Ikuta; Hidenori Yoshie; Naoki Yamanaka

    2011-01-01

    Hepatectomy is an effective surgical treatment for multiple bilobar liver metastases from colon cancer; however, one of the primary obstacles to completing surgical resection for these cases is an insufficient volume of the future remnant liver, which may cause postoperative liver failure. To induce atrophy of the unilateral lobe and hypertrophy of the future remnant liver, procedures to occlude the portal vein have been conventionally used prior to major hepatectomy. We report a case of a 50-year-old woman in whom two-stage hepatectomy was performed in combination with intraoperative ligation of the portal vein and the bile duct of the right hepatic lobe. This procedure was designed to promote the atrophic effect on the right hepatic lobe more effectively than the conventional technique, and to the best of our knowledge, it was used for the first time in the present case. Despite successful induction of liver volume shift as well as the following procedure, the patient died of subsequent liver failure after developing recurrent tumors. We discuss the first case in which simultaneous ligation of the portal vein and the biliary system was successfully applied as part of the first step of two-stage hepatectomy.

  4. An integrated two-stage support vector machine approach to forecast inundation maps during typhoons

    Science.gov (United States)

    Jhong, Bing-Chen; Wang, Jhih-Huang; Lin, Gwo-Fong

    2017-04-01

    During typhoons, accurate forecasts of hourly inundation depths are essential for inundation warning and mitigation. Due to the lack of observed data of inundation maps, sufficient observed data are not available for developing inundation forecasting models. In this paper, the inundation depths, which are simulated and validated by a physically based two-dimensional model (FLO-2D), are used as a database for inundation forecasting. A two-stage inundation forecasting approach based on Support Vector Machine (SVM) is proposed to yield 1- to 6-h lead-time inundation maps during typhoons. In the first stage (point forecasting), the proposed approach not only considers the rainfall intensity and inundation depth as model input but also simultaneously considers cumulative rainfall and forecasted inundation depths. In the second stage (spatial expansion), the geographic information of inundation grids and the inundation forecasts of reference points are used to yield inundation maps. The results clearly indicate that the proposed approach effectively improves the forecasting performance and decreases the negative impact of increasing forecast lead time. Moreover, the proposed approach is capable of providing accurate inundation maps for 1- to 6-h lead times. In conclusion, the proposed two-stage forecasting approach is suitable and useful for improving the inundation forecasting during typhoons, especially for long lead times.

  5. The influence of partial oxidation mechanisms on tar destruction in TwoStage biomass gasification

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Egsgaard, Helge; Stelte, Wolfgang

    2013-01-01

    TwoStage gasification of biomass results in almost tar free producer gas suitable for multiple end-use purposes. In the present study, it is investigated to what extent the partial oxidation process of the pyrolysis gas from the first stage is involved in direct and in-direct tar destruction and ...... tar destruction and a high moisture content of the biomass enhances the decomposition of phenol and inhibits the formation of naphthalene. This enhances tar conversion and gasification in the char-bed, and thus contributes in-directly to the tar destruction.......TwoStage gasification of biomass results in almost tar free producer gas suitable for multiple end-use purposes. In the present study, it is investigated to what extent the partial oxidation process of the pyrolysis gas from the first stage is involved in direct and in-direct tar destruction...... and conversion. The study identifies the following major impact factors regarding tar content in the producer gas: oxidation temperature, excess air ratio and biomass moisture content. In a experimental setup, wood pellets were pyrolyzed and the resulting pyrolysis gas was transferred in a heated partial...

  6. Numerical simulation of municipal solid waste combustion in a novel two-stage reciprocating incinerator.

    Science.gov (United States)

    Huai, X L; Xu, W L; Qu, Z Y; Li, Z G; Zhang, F P; Xiang, G M; Zhu, S Y; Chen, G

    2008-01-01

    A mathematical model was presented in this paper for the combustion of municipal solid waste in a novel two-stage reciprocating grate furnace. Numerical simulations were performed to predict the temperature, the flow and the species distributions in the furnace, with practical operational conditions taken into account. The calculated results agree well with the test data, and the burning behavior of municipal solid waste in the novel two-stage reciprocating incinerator can be demonstrated well. The thickness of waste bed, the initial moisture content, the excessive air coefficient and the secondary air are the major factors that influence the combustion process. If the initial moisture content of waste is high, both the heat value of waste and the temperature inside incinerator are low, and less oxygen is necessary for combustion. The air supply rate and the primary air distribution along the grate should be adjusted according to the initial moisture content of the waste. A reasonable bed thickness and an adequate excessive air coefficient can keep a higher temperature, promote the burnout of combustibles, and consequently reduce the emission of dioxin pollutants. When the total air supply is constant, reducing primary air and introducing secondary air properly can enhance turbulence and mixing, prolong the residence time of flue gas, and promote the complete combustion of combustibles. This study provides an important reference for optimizing the design and operation of municipal solid wastes furnace.

  7. Two stage heterotrophy/photoinduction culture of Scenedesmus incrassatulus: potential for lutein production.

    Science.gov (United States)

    Flórez-Miranda, Liliana; Cañizares-Villanueva, Rosa Olivia; Melchy-Antonio, Orlando; Jerónimo, Fernando Martínez-; Flores-Ortíz, Cesar Mateo

    2017-09-16

    A biomass production process including two stages, heterotrophy/photoinduction (TSHP), was developed to improve biomass and lutein production by the green microalgae Scenedesmus incrassatulus. To determine the effects of different nitrogen sources (yeast extract and urea) and temperature in the heterotrophic stage, experiments using shake flask cultures with glucose as the carbon source were carried out. The highest biomass productivity and specific pigment concentrations were reached using urea+vitamins (U+V) at 30°C. The first stage of the TSHP process was done in a 6L bioreactor, and the inductions in a 3L airlift photobioreactor. At the end of the heterotrophic stage, S. incrassatulus achieved the maximal biomass concentration, increasing from 7.22gL(-1) to 17.98gL(-1) with an increase in initial glucose concentration from 10.6gL(-1) to 30.3gL(-1). However, the higher initial glucose concentration resulted in a lower specific growth rate (μ) and lower cell yield (Yx/s), possibly due to substrate inhibition. After 24h of photoinduction, lutein content in S. incrassatulus biomass was 7 times higher than that obtained at the end of heterotrophic cultivation, and the lutein productivity was 1.6 times higher compared with autotrophic culture of this microalga. Hence, the two-stage heterotrophy/photoinduction culture is an effective strategy for high cell density and lutein production in S. incrassatulus. Copyright © 2017. Published by Elsevier B.V.

  8. Aerobic and two-stage anaerobic-aerobic sludge digestion with pure oxygen and air aeration.

    Science.gov (United States)

    Zupancic, Gregor D; Ros, Milenko

    2008-01-01

    The degradability of excess activated sludge from a wastewater treatment plant was studied. The objective was establishing the degree of degradation using either air or pure oxygen at different temperatures. Sludge treated with pure oxygen was degraded at temperatures from 22 degrees C to 50 degrees C while samples treated with air were degraded between 32 degrees C and 65 degrees C. Using air, sludge is efficiently degraded at 37 degrees C and at 50-55 degrees C. With oxygen, sludge was most effectively degraded at 38 degrees C or at 25-30 degrees C. Two-stage anaerobic-aerobic processes were studied. The first anaerobic stage was always operated for 5 days HRT, and the second stage involved aeration with pure oxygen and an HRT between 5 and 10 days. Under these conditions, there is 53.5% VSS removal and 55.4% COD degradation at 15 days HRT - 5 days anaerobic, 10 days aerobic. Sludge digested with pure oxygen at 25 degrees C in a batch reactor converted 48% of sludge total Kjeldahl nitrogen to nitrate. Addition of an aerobic stage with pure oxygen aeration to the anaerobic digestion enhances ammonium nitrogen removal. In a two-stage anaerobic-aerobic sludge digestion process within 8 days HRT of the aerobic stage, the removal of ammonium nitrogen was 85%.

  9. Dynamics of installation way for the actuator of a two-stage active vibration-isolator

    Institute of Scientific and Technical Information of China (English)

    HU Li; HUANG Qi-bai; HE Xue-song; YUAN Ji-xuan

    2008-01-01

    We investigated the behaviors of an active control system of two-stage vibration isolation with the actuator installed in parallel with either the upper passive mount or the lower passive isolation mount. We revealed the relationships between the active control force of the actuator and the parameters of the passive isolators by studying the dynamics of two-stage active vibration isolation for the actuator at the foregoing two positions in turn. With the actuator installed beside the upper mount, a small active force can achieve a very good isolating effect when the frequency of the stimulating force is much larger than the natural frequency of the upper mount; a larger active force is required in the low-frequency domain; and the active force equals the stimulating force when the upper mount works within the resonance region, suggesting an approach to reducing wobble and ensuring desirable installation accuracy by increasing the upper-mount stiffness. In either the low or the high frequency region far away from the resonance region, the active force is smaller when the actuator is beside the lower mount than beside the upper mount.

  10. Final Report on Two-Stage Fast Spectrum Fuel Cycle Options

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik [Purdue Univ., West Lafayette, IN (United States); Lin, C. S. [Purdue Univ., West Lafayette, IN (United States); Hader, J. S. [Purdue Univ., West Lafayette, IN (United States); Park, T. K. [Purdue Univ., West Lafayette, IN (United States); Deng, P. [Purdue Univ., West Lafayette, IN (United States); Yang, G. [Purdue Univ., West Lafayette, IN (United States); Jung, Y. S. [Purdue Univ., West Lafayette, IN (United States); Kim, T. K. [Argonne National Lab. (ANL), Argonne, IL (United States); Stauff, N. E. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-30

    This report presents the performance characteristics of two “two-stage” fast spectrum fuel cycle options proposed to enhance uranium resource utilization and to reduce nuclear waste generation. One is a two-stage fast spectrum fuel cycle option of continuous recycle of plutonium (Pu) in a fast reactor (FR) and subsequent burning of minor actinides (MAs) in an accelerator-driven system (ADS). The first stage is a sodium-cooled FR fuel cycle starting with low-enriched uranium (LEU) fuel; at the equilibrium cycle, the FR is operated using the recovered Pu and natural uranium without supporting LEU. Pu and uranium (U) are co-extracted from the discharged fuel and recycled in the first stage, and the recovered MAs are sent to the second stage. The second stage is a sodium-cooled ADS in which MAs are burned in an inert matrix fuel form. The discharged fuel of ADS is reprocessed, and all the recovered heavy metals (HMs) are recycled into the ADS. The other is a two-stage FR/ADS fuel cycle option with MA targets loaded in the FR. The recovered MAs are not directly sent to ADS, but partially incinerated in the FR in order to reduce the amount of MAs to be sent to the ADS. This is a heterogeneous recycling option of transuranic (TRU) elements

  11. Hydrogen and methane production from household solid waste in the two-stage fermentation process

    DEFF Research Database (Denmark)

    Lui, D.; Liu, D.; Zeng, Raymond Jianxiong

    2006-01-01

    A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H-2/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH4/g VS....... Furthermore, this study also provided direct evidence in the dynamic fermentation process that, hydrogen production increase was reflected by acetate to butyrate ratio increase in liquid phase. (c) 2006 Elsevier Ltd. All rights reserved.......A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H-2/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH4/g VS...... added. This figure was 21% higher than the methane yield from the one-stage process, which was run as control. Sparging of the hydrogen reactor with methane gas resulted in doubling of the hydrogen production. PH was observed as a key factor affecting fermentation pathway in hydrogen production stage...

  12. Occurrence of two-stage hardening in C-Mn steel wire rods containing pearlitic microstructure

    Science.gov (United States)

    Singh, Balbir; Sahoo, Gadadhar; Saxena, Atul

    2016-09-01

    The 8 and 10 mm diameter wire rods intended for use as concrete reinforcement were produced/ hot rolled from C-Mn steel chemistry containing various elements within the range of C:0.55-0.65, Mn:0.85-1.50, Si:0.05-0.09, S:0.04 max, P:0.04 max and N:0.006 max wt%. Depending upon the C and Mn contents the product attained pearlitic microstructure in the range of 85-93% with balance amount of polygonal ferrite transformed at prior austenite grain boundaries. The pearlitic microstructure in the wire rods helped in achieving yield strength, tensile strength, total elongation and reduction in area values within the range of 422-515 MPa, 790-950 MPa, 22-15% and 45-35%, respectively. On analyzing the tensile results it was revealed that the material experienced hardening in two stages separable by a knee strain value of about 0.05. The occurrence of two stage hardening thus in the steel with hardening coefficients of 0.26 and 0.09 could be demonstrated with the help of derived relationships existed between flow stress and the strain.

  13. Rules and mechanisms for efficient two-stage learning in neural circuits

    Science.gov (United States)

    Teşileanu, Tiberiu; Ölveczky, Bence; Balasubramanian, Vijay

    2017-01-01

    Trial-and-error learning requires evaluating variable actions and reinforcing successful variants. In songbirds, vocal exploration is induced by LMAN, the output of a basal ganglia-related circuit that also contributes a corrective bias to the vocal output. This bias is gradually consolidated in RA, a motor cortex analogue downstream of LMAN. We develop a new model of such two-stage learning. Using stochastic gradient descent, we derive how the activity in ‘tutor’ circuits (e.g., LMAN) should match plasticity mechanisms in ‘student’ circuits (e.g., RA) to achieve efficient learning. We further describe a reinforcement learning framework through which the tutor can build its teaching signal. We show that mismatches between the tutor signal and the plasticity mechanism can impair learning. Applied to birdsong, our results predict the temporal structure of the corrective bias from LMAN given a plasticity rule in RA. Our framework can be applied predictively to other paired brain areas showing two-stage learning. DOI: http://dx.doi.org/10.7554/eLife.20944.001 PMID:28374674

  14. Two-stage estimation for multivariate recurrent event data with a dependent terminal event.

    Science.gov (United States)

    Chen, Chyong-Mei; Chuang, Ya-Wen; Shen, Pao-Sheng

    2015-03-01

    Recurrent event data arise in longitudinal follow-up studies, where each subject may experience the same type of events repeatedly. The work in this article is motivated by the data from a study of repeated peritonitis for patients on peritoneal dialysis. Due to the aspects of medicine and cost, the peritonitis cases were classified into two types: Gram-positive and non-Gram-positive peritonitis. Further, since the death and hemodialysis therapy preclude the occurrence of recurrent events, we face multivariate recurrent event data with a dependent terminal event. We propose a flexible marginal model, which has three characteristics: first, we assume marginal proportional hazard and proportional rates models for terminal event time and recurrent event processes, respectively; second, the inter-recurrences dependence and the correlation between the multivariate recurrent event processes and terminal event time are modeled through three multiplicative frailties corresponding to the specified marginal models; third, the rate model with frailties for recurrent events is specified only on the time before the terminal event. We propose a two-stage estimation procedure for estimating unknown parameters. We also establish the consistency of the two-stage estimator. Simulation studies show that the proposed approach is appropriate for practical use. The methodology is applied to the peritonitis cohort data that motivated this study. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Two-stage earth-to-orbit vehicles with dual-fuel propulsion in the Orbiter

    Science.gov (United States)

    Martin, J. A.

    1982-01-01

    Earth-to-orbit vehicle studies of future replacements for the Space Shuttle are needed to guide technology development. Previous studies that have examined single-stage vehicles have shown advantages for dual-fuel propulsion. Previous two-stage system studies have assumed all-hydrogen fuel for the Orbiters. The present study examined dual-fuel Orbiters and found that the system dry mass could be reduced with this concept. The possibility of staging the booster at a staging velocity low enough to allow coast-back to the launch site is shown to be beneficial, particularly in combination with a dual-fuel Orbiter. An engine evaluation indicated the same ranking of engines as did a previous single-stage study. Propane and RP-1 fuels result in lower vehicle dry mass than methane, and staged-combustion engines are preferred over gas-generator engines. The sensitivity to the engine selection is less for two-stage systems than for single-stage systems.

  16. Two-stage effects of awareness cascade on epidemic spreading in multiplex networks

    Science.gov (United States)

    Guo, Quantong; Jiang, Xin; Lei, Yanjun; Li, Meng; Ma, Yifang; Zheng, Zhiming

    2015-01-01

    Human awareness plays an important role in the spread of infectious diseases and the control of propagation patterns. The dynamic process with human awareness is called awareness cascade, during which individuals exhibit herd-like behavior because they are making decisions based on the actions of other individuals [Borge-Holthoefer et al., J. Complex Networks 1, 3 (2013), 10.1093/comnet/cnt006]. In this paper, to investigate the epidemic spreading with awareness cascade, we propose a local awareness controlled contagion spreading model on multiplex networks. By theoretical analysis using a microscopic Markov chain approach and numerical simulations, we find the emergence of an abrupt transition of epidemic threshold βc with the local awareness ratio α approximating 0.5 , which induces two-stage effects on epidemic threshold and the final epidemic size. These findings indicate that the increase of α can accelerate the outbreak of epidemics. Furthermore, a simple 1D lattice model is investigated to illustrate the two-stage-like sharp transition at αc≈0.5 . The results can give us a better understanding of why some epidemics cannot break out in reality and also provide a potential access to suppressing and controlling the awareness cascading systems.

  17. Configuration Consideration for Expander in Transcritical Carbon Dioxide Two-Stage Compression Cycle

    Institute of Scientific and Technical Information of China (English)

    MA Yitai; YANG Junlan; GUAN Haiqing; LI Minxia

    2005-01-01

    To investigate the configuration consideration of expander in transcritical carbon dioxide two-stage compression cycle, the best place in the cycle should be searched for to reinvest the recovery work so as to improve the system efficiency. The expander and the compressor are connected to the same shaft and integrated into one unit, with the latter being driven by the former, thus the transfer loss and leakage loss can be decreased greatly. In these systems, the expander can be either connected with the first stage compressor (shortened as DCDL cycle) or the second stage compressor (shortened as DCDH cycle), but the two configuration ways can get different performances. By setting up theoretical model for two kinds of expander configuration ways in the transcritical carbon dioxide two-stage compression cycle, the first and the second laws of thermodynamics are used to analyze the coefficient of performance, exergy efficiency, inter-stage pressure, discharge temperature and exergy losses of each component for the two cycles. From the model results, the performance of DCDH cycle is better than that of DCDL cycle. The analysis results are indispensable to providing a theoretical basis for practical design and operating.

  18. Two-stage coordination multi-radio multi-channel mac protocol for wireless mesh networks

    CERN Document Server

    Zhao, Bingxuan

    2011-01-01

    Within the wireless mesh network, a bottleneck problem arises as the number of concurrent traffic flows (NCTF) increases over a single common control channel, as it is for most conventional networks. To alleviate this problem, this paper proposes a two-stage coordination multi-radio multi-channel MAC (TSC-M2MAC) protocol that designates all available channels as both control channels and data channels in a time division manner through a two-stage coordination. At the first stage, a load balancing breadth-first-search-based vertex coloring algorithm for multi-radio conflict graph is proposed to intelligently allocate multiple control channels. At the second stage, a REQ/ACK/RES mechanism is proposed to realize dynamical channel allocation for data transmission. At this stage, the Channel-and-Radio Utilization Structure (CRUS) maintained by each node is able to alleviate the hidden nodes problem; also, the proposed adaptive adjustment algorithm for the Channel Negotiation and Allocation (CNA) sub-interval is ab...

  19. Development of a Two-Stage Microalgae Dewatering Process – A Life Cycle Assessment Approach

    Science.gov (United States)

    Soomro, Rizwan R.; Zeng, Xianhai; Lu, Yinghua; Lin, Lu; Danquah, Michael K.

    2016-01-01

    Even though microalgal biomass is leading the third generation biofuel research, significant effort is required to establish an economically viable commercial-scale microalgal biofuel production system. Whilst a significant amount of work has been reported on large-scale cultivation of microalgae using photo-bioreactors and pond systems, research focus on establishing high performance downstream dewatering operations for large-scale processing under optimal economy is limited. The enormous amount of energy and associated cost required for dewatering large-volume microalgal cultures has been the primary hindrance to the development of the needed biomass quantity for industrial-scale microalgal biofuels production. The extremely dilute nature of large-volume microalgal suspension and the small size of microalgae cells in suspension create a significant processing cost during dewatering and this has raised major concerns towards the economic success of commercial-scale microalgal biofuel production as an alternative to conventional petroleum fuels. This article reports an effective framework to assess the performance of different dewatering technologies as the basis to establish an effective two-stage dewatering system. Bioflocculation coupled with tangential flow filtration (TFF) emerged a promising technique with total energy input of 0.041 kWh, 0.05 kg CO2 emissions and a cost of $ 0.0043 for producing 1 kg of microalgae biomass. A streamlined process for operational analysis of two-stage microalgae dewatering technique, encompassing energy input, carbon dioxide emission, and process cost, is presented. PMID:26904075

  20. Waste-gasification efficiency of a two-stage fluidized-bed gasification system.

    Science.gov (United States)

    Liu, Zhen-Shu; Lin, Chiou-Liang; Chang, Tsung-Jen; Weng, Wang-Chang

    2016-02-01

    This study employed a two-stage fluidized-bed gasifier as a gasification reactor and two additives (CaO and activated carbon) as the Stage-II bed material to investigate the effects of the operating temperature (700°C, 800°C, and 900°C) on the syngas composition, total gas yield, and gas-heating value during simulated waste gasification. The results showed that when the operating temperature increased from 700 to 900°C, the molar percentage of H2 in the syngas produced by the two-stage gasification process increased from 19.4 to 29.7mol% and that the total gas yield and gas-heating value also increased. When CaO was used as the additive, the molar percentage of CO2 in the syngas decreased, and the molar percentage of H2 increased. When activated carbon was used, the molar percentage of CH4 in the syngas increased, and the total gas yield and gas-heating value increased. Overall, CaO had better effects on the production of H2, whereas activated carbon clearly enhanced the total gas yield and gas-heating value. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  1. A low-voltage sense amplifier with two-stage operational amplifier clamping for flash memory

    Science.gov (United States)

    Guo, Jiarong

    2017-04-01

    A low-voltage sense amplifier with reference current generator utilizing two-stage operational amplifier clamp structure for flash memory is presented in this paper, capable of operating with minimum supply voltage at 1 V. A new reference current generation circuit composed of a reference cell and a two-stage operational amplifier clamping the drain pole of the reference cell is used to generate the reference current, which avoids the threshold limitation caused by current mirror transistor in the traditional sense amplifier. A novel reference voltage generation circuit using dummy bit-line structure without pull-down current is also adopted, which not only improves the sense window enhancing read precision but also saves power consumption. The sense amplifier was implemented in a flash realized in 90 nm flash technology. Experimental results show the access time is 14.7 ns with power supply of 1.2 V and slow corner at 125 °C. Project supported by the National Natural Science Fundation of China (No. 61376028).

  2. Two-stage high temperature sludge gasification using the waste heat from hot blast furnace slags.

    Science.gov (United States)

    Sun, Yongqi; Zhang, Zuotai; Liu, Lili; Wang, Xidong

    2015-12-01

    Nowadays, disposal of sewage sludge from wastewater treatment plants and recovery of waste heat from steel industry, become two important environmental issues and to integrate these two problems, a two-stage high temperature sludge gasification approach was investigated using the waste heat in hot slags herein. The whole process was divided into two stages, i.e., the low temperature sludge pyrolysis at ⩽ 900°C in argon agent and the high temperature char gasification at ⩾ 900°C in CO2 agent, during which the heat required was supplied by hot slags in different temperature ranges. Both the thermodynamic and kinetic mechanisms were identified and it was indicated that an Avrami-Erofeev model could best interpret the stage of char gasification. Furthermore, a schematic concept of this strategy was portrayed, based on which the potential CO yield and CO2 emission reduction achieved in China could be ∼1.92∗10(9)m(3) and 1.93∗10(6)t, respectively.

  3. A two-stage broadcast message propagation model in social networks

    Science.gov (United States)

    Wang, Dan; Cheng, Shun-Jun

    2016-11-01

    Message propagation in social networks is becoming a popular topic in complex networks. One of the message types in social networks is called broadcast message. It refers to a type of message which has a unique and unknown destination for the publisher, such as 'lost and found'. Its propagation always has two stages. Due to this feature, rumor propagation model and epidemic propagation model have difficulty in describing this message's propagation accurately. In this paper, an improved two-stage susceptible-infected-removed model is proposed. We come up with the concept of the first forwarding probability and the second forwarding probability. Another part of our work is figuring out the influence to the successful message transmission chance in each level resulting from multiple reasons, including the topology of the network, the receiving probability, the first stage forwarding probability, the second stage forwarding probability as well as the length of the shortest path between the publisher and the relevant destination. The proposed model has been simulated on real networks and the results proved the model's effectiveness.

  4. Rapid Two-stage Versus One-stage Surgical Repair of Interrupted Aortic Arch with Ventricular Septal Defect in Neonates

    Directory of Open Access Journals (Sweden)

    Meng-Lin Lee

    2008-11-01

    Conclusion: The outcome of rapid two-stage repair is comparable to that of one-stage repair. Rapid two-stage repair has the advantages of significantly shorter cardiopulmonary bypass duration and AXC time, and avoids deep hypothermic circulatory arrest. LVOTO remains an unresolved issue, and postoperative aortic arch restenosis can be dilated effectively by percutaneous balloon angioplasty.

  5. Two-Stage Nerve Graft in Severe Scar: A Time-Course Study in a Rat Model

    Directory of Open Access Journals (Sweden)

    Shayan Zadegan

    2015-04-01

    According to the EPT and WRL, the two-stage nerve graft showed significant improvement (P=0.020 and P =0.017 respectively. The TOA showed no significant difference between the two groups. The total vascular index was significantly higher in the two-stage nerve graft group (P

  6. Synthesis, Deposition, and Microstructure Development of Thin Films Formed by Sulfidation and Selenization of Copper Zinc Tin Sulfide Nanocrystals

    Science.gov (United States)

    Chernomordik, Boris David

    Significant reduction in greenhouse gas emission and pollution associated with the global power demand can be accomplished by supplying tens-of-terawatts of power with solar cell technologies. No one solar cell material currently on the market is poised to meet this challenge due to issues such as manufacturing cost, material shortage, or material toxicity. For this reason, there is increasing interest in efficient light-absorbing materials that are comprised of abundant and non-toxic elements for thin film solar cell. Among these materials are copper zinc tin sulfide (Cu2ZnSnS4, or CZTS), copper zinc tin selenide (Cu2ZnSnSe4, or CZTSe), and copper zinc tin sulfoselenide alloys [Cu2ZnSn(SxSe1-x )4, or CZTSSe]. Laboratory power conversion efficiencies of CZTSSe-based solar cells have risen to almost 13% in less than three decades of research. Meeting the terawatt challenge will also require low cost fabrication. CZTSSe thin films from annealed colloidal nanocrystal coatings is an example of solution-based methods that can reduce manufacturing costs through advantages such as high throughput, high material utilization, and low capital expenses. The film microstructure and grain size affects the solar cell performance. To realize low cost commercial production and high efficiencies of CZTSSe-based solar cells, it is necessary to understand the fundamental factors that affect crystal growth and microstructure evolution during CZTSSe annealing. Cu2ZnSnS4 (CZTS) nanocrystals were synthesized via thermolysis of single-source cation and sulfur precursors copper, zinc and tin diethyldithiocarbamates. The average nanocrystal size could be tuned between 2 nm and 40 nm, by varying the synthesis temperature between 150 °C and 340 °C. The synthesis is rapid and is completed in less than 10 minutes. Characterization by X-ray diffraction, Raman spectroscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy confirm that the nanocrystals are nominally

  7. Impact of selenization pressure on the micro-structural properties of Cu2ZnSnSe4 thin films

    Science.gov (United States)

    Nagapure, Dipak Ramdas; Patil, Rhishikesh Mahadev; Chandra, G. Hema; Sunil, M. Anantha; Subbaiah, Y. P. Venkata; Gupta, Mukul; Prasada Rao, R.

    2017-10-01

    The Cu2ZnSnSe4(CZTSe) thin films were prepared by a two-step process consisting of high vacuum sequential evaporation of precursors stack (Sn/Se/ZnSe/Se/Cu/Se) in 4-folds followed by selenization at 350 °C in tubular furnace under varied argon gas pressure from 1 mbar to 600 mbar with an interval of 150 mbar. The Cu/(Zn + Sn) and Zn/Sn ratios found to vary from 1.22 to 0.93 and 1.94 to 1.08 with an increase in pressure and the stacks selenized for 600 mbar showed nearly stoichiometric composition with slight Cu-poor and Zn-rich values required for CZTSe growth. The X-ray diffraction studies revealed similar diffraction pattern with a preferred orientation along (112) plane, indicating the formation of kesterite-type CZTSe for all the selenization pressures. Raman spectra recorded using different excitation wavelength sources (785, 532 and 458 nm), revealed two main peaks at 192 and 172 cm-1 and two supplementary weak peaks at 82 and 232 cm-1 corresponding to kesterite-ordered CZTSe phase for films selenized at a pressure of 600 mbar. Appreciable changes in morphology have been noticed with increase in selenization pressure from low dense irregular rod like morphology to compact spherical grain morphology. All the samples showed high absorption coefficient (>104cm-1). A slight variation in optical band gap from 0.90 to 1.01 eV was found with increase in selenization pressure. The Hall effect measurements reveal that all the films are p-type conductive. The precursor stack films selenized at 600 mbar exhibit high mobility of 7.88 cm2(Vs)-1 with lower carrier concentration of 2.54 × 1019 cm-3 and resistivity of an order of 10-2 Ωcm, respectively.

  8. Two-stage unilateral versus one-stage bilateral single-port sympathectomy for palmar and axillary hyperhidrosis.

    Science.gov (United States)

    Ibrahim, Mohsen; Menna, Cecilia; Andreetti, Claudio; Ciccone, Anna Maria; D'Andrilli, Antonio; Maurizi, Giulio; Poggi, Camilla; Vanni, Camilla; Venuta, Federico; Rendina, Erino Angelo

    2013-06-01

    Video-assisted thoracoscopic sympathectomy is currently the best treatment for palmar and axillary hyperhidrosis. It can be performed through either one or two stages of surgery. This study aimed to evaluate the operative and postoperative results of two-stage unilateral vs one-stage bilateral thoracoscopic sympathectomy. From November 1995 to February 2011, 270 patients with severe palmar and/or axillary hyperhidrosis were recruited for this study. One hundred and thirty patients received one-stage bilateral, single-port video-assisted thoracoscopic sympathectomy (one-stage group) and 140, two-stage unilateral, single-port video-assisted thoracoscopic sympathectomy, with a mean time interval of 4 months between the procedures (two-stage group). The mean postoperative follow-up period was 12.5 (range: 1-24 months). After surgery, hands and axillae of all patients were dry and warm. Sixteen (12%) patients of the one-stage group and 15 (11%) of the two-stage group suffered from mild/moderate pain (P = 0.8482). The mean operative time was 38 ± 5 min in the one-stage group and 39 ± 8 min in the two-stage group (P = 0.199). Pneumothorax occurred in 8 (6%) patients of the one-stage group and in 11 (8%) of the two-stage group. Compensatory sweating occurred in 25 (19%) patients of the one-stage group and in 6 (4%) of the two-stage group (P = 0.0001). No patients developed Horner's syndrome. Both two-stage unilateral and one-stage bilateral single-port video-assisted thoracoscopic sympathectomies are effective, safe and minimally invasive procedures. Two-stage unilateral sympathectomy can be performed with a lower occurrence of compensatory sweating, improving permanently the quality of life in patients with palmar and axillary hyperhidrosis.

  9. Experiences from the full-scale implementation of a new two-stage vertical flow constructed wetland design.

    Science.gov (United States)

    Langergraber, Guenter; Pressl, Alexander; Haberl, Raimund

    2014-01-01

    This paper describes the results of the first full-scale implementation of a two-stage vertical flow constructed wetland (CW) system developed to increase nitrogen removal. The full-scale system was constructed for the Bärenkogelhaus, which is located in Styria at the top of a mountain, 1,168 m above sea level. The Bärenkogelhaus has a restaurant with 70 seats, 16 rooms for overnight guests and is a popular site for day visits, especially during weekends and public holidays. The CW treatment system was designed for a hydraulic load of 2,500 L.d(-1) with a specific surface area requirement of 2.7 m(2) per person equivalent (PE). It was built in fall 2009 and started operation in April 2010 when the restaurant was re-opened. Samples were taken between July 2010 and June 2013 and were analysed in the laboratory of the Institute of Sanitary Engineering at BOKU University using standard methods. During 2010 the restaurant at Bärenkogelhaus was open 5 days a week whereas from 2011 the Bärenkogelhaus was open only on demand for events. This resulted in decreased organic loads of the system in the later period. In general, the measured effluent concentrations were low and the removal efficiencies high. During the whole period the ammonia nitrogen effluent concentration was below 1 mg/L even at effluent water temperatures below 3 °C. Investigations during high-load periods, i.e. events like weddings and festivals at weekends, with more than 100 visitors, showed a very robust treatment performance of the two-stage CW system. Effluent concentrations of chemical oxygen demand and NH4-N were not affected by these events with high hydraulic loads.

  10. Two-stage dilute-acid and organic-solvent lignocellulosic pretreatment for enhanced bioprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Brodeur, G.; Telotte, J.; Stickel, J. J.; Ramakrishnan, S.

    2016-11-01

    A two stage pretreatment approach for biomass is developed in the current work in which dilute acid (DA) pretreatment is followed by a solvent based pretreatment (N-methyl morpholine N oxide -- NMMO). When the combined pretreatment (DAWNT) is applied to sugarcane bagasse and corn stover, the rates of hydrolysis and overall yields (>90%) are seen to dramatically improve and under certain conditions 48 h can be taken off the time of hydrolysis with the additional NMMO step to reach similar conversions. DAWNT shows a 2-fold increase in characteristic rates and also fractionates different components of biomass -- DA treatment removes the hemicellulose while the remaining cellulose is broken down by enzymatic hydrolysis after NMMO treatment to simple sugars. The remaining residual solid is high purity lignin. Future work will focus on developing a full scale economic analysis of DAWNT for use in biomass fractionation.

  11. Reconstruction of Gene Regulatory Networks Based on Two-Stage Bayesian Network Structure Learning Algorithm

    Institute of Scientific and Technical Information of China (English)

    Gui-xia Liu; Wei Feng; Han Wang; Lei Liu; Chun-guang Zhou

    2009-01-01

    In the post-genomic biology era, the reconstruction of gene regulatory networks from microarray gene expression data is very important to understand the underlying biological system, and it has been a challenging task in bioinformatics. The Bayesian network model has been used in reconstructing the gene regulatory network for its advantages, but how to determine the network structure and parameters is still important to be explored. This paper proposes a two-stage structure learning algorithm which integrates immune evolution algorithm to build a Bayesian network .The new algorithm is evaluated with the use of both simulated and yeast cell cycle data. The experimental results indicate that the proposed algorithm can find many of the known real regulatory relationships from literature and predict the others unknown with high validity and accuracy.

  12. A two-stage metal valorisation process from electric arc furnace dust (EAFD

    Directory of Open Access Journals (Sweden)

    H. Issa

    2016-04-01

    Full Text Available This paper demonstrates possibility of separate zinc and lead recovery from coal composite pellets, composed of EAFD with other synergetic iron-bearing wastes and by-products (mill scale, pyrite-cinder, magnetite concentrate, through a two-stage process. The results show that in the first, low temp erature stage performed in electro-resistant furnace, removal of lead is enabled due to presence of chlorides in the system. In the second stage, performed at higher temperatures in Direct Current (DC plasma furnace, valorisation of zinc is conducted. Using this process, several final products were obtained, including a higher purity zinc oxide, which, by its properties, corresponds washed Waelz oxide.

  13. Two stages of parafoveal processing during reading: Evidence from a display change detection task.

    Science.gov (United States)

    Angele, Bernhard; Slattery, Timothy J; Rayner, Keith

    2016-08-01

    We used a display change detection paradigm (Slattery, Angele, & Rayner Human Perception and Performance, 37, 1924-1938 2011) to investigate whether display change detection uses orthographic regularity and whether detection is affected by the processing difficulty of the word preceding the boundary that triggers the display change. Subjects were significantly more sensitive to display changes when the change was from a nonwordlike preview than when the change was from a wordlike preview, but the preview benefit effect on the target word was not affected by whether the preview was wordlike or nonwordlike. Additionally, we did not find any influence of preboundary word frequency on display change detection performance. Our results suggest that display change detection and lexical processing do not use the same cognitive mechanisms. We propose that parafoveal processing takes place in two stages: an early, orthography-based, preattentional stage, and a late, attention-dependent lexical access stage.

  14. Enhanced biodiesel production in Neochloris oleoabundans by a semi-continuous process in two stage photobioreactors.

    Science.gov (United States)

    Yoon, Se Young; Hong, Min Eui; Chang, Won Seok; Sim, Sang Jun

    2015-07-01

    Under autotrophic conditions, highly productive biodiesel production was achieved using a semi-continuous culture system in Neochloris oleoabundans. In particular, the flue gas generated by combustion of liquefied natural gas and natural solar radiation were used for cost-effective microalgal culture system. In semi-continuous culture, the greater part (~80%) of the culture volume containing vegetative cells grown under nitrogen-replete conditions in a first photobioreactor (PBR) was directly transferred to a second PBR and cultured sequentially under nitrogen-deplete conditions for accelerating oil accumulation. As a result, in semi-continuous culture, the productivities of biomass and biodiesel in the cells were increased by 58% (growth phase) and 51% (induction phase) compared to the cells in batch culture, respectively. The semi-continuous culture system using two stage photobioreactors is a very efficient strategy to further improve biodiesel production from microalgae under photoautotrophic conditions.

  15. The Sources of Efficiency of the Nigerian Banking Industry: A Two- Stage Approach

    Directory of Open Access Journals (Sweden)

    Frances Obafemi

    2013-11-01

    Full Text Available The paper employed a two-stage Data Envelopment Analysis (DEA approach to examine the sources oftechnical efficiency in the Nigerian banking sub-sector. Using a cross sectionof commercial and merchant banks, the study showed that the Nigerian bankingindustry was not efficient both in the pre-and-post-liberalization era. Thestudy further revealed that market share was the strongest determinant oftechnical efficiency in the Nigerian banking Industry. Thus, appropriatemacroeconomic policy, institutional development and structural reforms mustaccompany financial liberalization to create the stable environment requiredfor it to succeed. Hence, the present bank consolidation and reforms by theCentral Bank of Nigeria, which started with Soludo and continued with Sanusi,are considered necessary, especially in the areas of e banking and reorganizingthe management of banks.

  16. Two-stage triolein breath test differentiates pancreatic insufficiency from other causes of malabsorption

    Energy Technology Data Exchange (ETDEWEB)

    Goff, J.S.

    1982-07-01

    In 24 patients with malabsorption, (/sup 14/C)triolein breath tests were conducted before and together with the administration of pancreatic enzymes (Pancrease, Johnson and Johnson, Skillman, N.J.). Eleven patients with pancreatic insufficiency had a significant rise in peak percent dose per hour /sup 14/CO/sub 2/ excretion after Pancrease, whereas 13 patients with other causes of malabsorption had no increase in /sup 14/CO/sub 2/ excretion (2.61 +/- 0.96 vs. 0.15 +/- 0.45, p less than 0.001). The two-stage (/sup 14/C)triolein breath test appears to be an accurate and simple noninvasive test of fat malabsorption that differentiates steatorrhea secondary to pancreatic insufficiency from other causes of steatorrhea.

  17. Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment

    Science.gov (United States)

    Vivek, P.; Saravanan, R.; Chandrasekaran, M.; Pugazhenthi, R.

    2017-03-01

    Lot streaming in Hybrid flowshop [HFS] is encountered in many real world problems. This paper deals with a heuristic approach for Lot streaming based on critical machine consideration for a two stage Hybrid Flowshop. The first stage has two identical parallel machines and the second stage has only one machine. In the second stage machine is considered as a critical by valid reasons these kind of problems is known as NP hard. A mathematical model developed for the selected problem. The simulation modelling and analysis were carried out in Extend V6 software. The heuristic developed for obtaining optimal lot streaming schedule. The eleven cases of lot streaming were considered. The proposed heuristic was verified and validated by real time simulation experiments. All possible lot streaming strategies and possible sequence under each lot streaming strategy were simulated and examined. The heuristic consistently yielded optimal schedule consistently in all eleven cases. The identification procedure for select best lot streaming strategy was suggested.

  18. Product prioritization in a two-stage food production system with intermediate storage

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2007-01-01

    In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the dedi......In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

  19. Experimental and modeling study of a two-stage pilot scale high solid anaerobic digester system.

    Science.gov (United States)

    Yu, Liang; Zhao, Quanbao; Ma, Jingwei; Frear, Craig; Chen, Shulin

    2012-11-01

    This study established a comprehensive model to configure a new two-stage high solid anaerobic digester (HSAD) system designed for highly degradable organic fraction of municipal solid wastes (OFMSW). The HSAD reactor as the first stage was naturally separated into two zones due to biogas floatation and low specific gravity of solid waste. The solid waste was retained in the upper zone while only the liquid leachate resided in the lower zone of the HSAD reactor. Continuous stirred-tank reactor (CSTR) and advective-diffusive reactor (ADR) models were constructed in series to describe the whole system. Anaerobic digestion model No. 1 (ADM1) was used as reaction kinetics and incorporated into each reactor module. Compared with the experimental data, the simulation results indicated that the model was able to well predict the pH, volatile fatty acid (VFA) and biogas production.

  20. ADM1-based modeling of methane production from acidified sweet sorghum extractin a two stage process

    DEFF Research Database (Denmark)

    Antonopoulou, Georgia; Gavala, Hariklia N.; Skiadas, Ioannis

    2012-01-01

    The present study focused on the application of the Anaerobic Digestion Model 1 οn the methane production from acidified sorghum extract generated from a hydrogen producing bioreactor in a two-stage anaerobic process. The kinetic parameters for hydrogen and volatile fatty acids consumption were...... estimated through fitting of the model equations to the data obtained from batch experiments. The simulation of the continuous reactor performance at all HRTs tested (20, 15 and 10d) was very satisfactory. Specifically, the largest deviation of the theoretical predictions against the experimental data...... was 12% for the methane production rate at the HRT of 20d while the deviation values for the 15 and 10 d HRT were 1.9% and 1.1%, respectively. The model predictions regarding pH, methane percentage in the gas phase and COD removal were in very good agreement with the experimental data with a deviation...

  1. Nitrification and microalgae cultivation for two-stage biological nutrient valorization from source separated urine.

    Science.gov (United States)

    Coppens, Joeri; Lindeboom, Ralph; Muys, Maarten; Coessens, Wout; Alloul, Abbas; Meerbergen, Ken; Lievens, Bart; Clauwaert, Peter; Boon, Nico; Vlaeminck, Siegfried E

    2016-07-01

    Urine contains the majority of nutrients in urban wastewaters and is an ideal nutrient recovery target. In this study, stabilization of real undiluted urine through nitrification and subsequent microalgae cultivation were explored as strategy for biological nutrient recovery. A nitrifying inoculum screening revealed a commercial aquaculture inoculum to have the highest halotolerance. This inoculum was compared with municipal activated sludge for the start-up of two nitrification membrane bioreactors. Complete nitrification of undiluted urine was achieved in both systems at a conductivity of 75mScm(-1) and loading rate above 450mgNL(-1)d(-1). The halotolerant inoculum shortened the start-up time with 54%. Nitrite oxidizers showed faster salt adaptation and Nitrobacter spp. became the dominant nitrite oxidizers. Nitrified urine as growth medium for Arthrospira platensis demonstrated superior growth compared to untreated urine and resulted in a high protein content of 62%. This two-stage strategy is therefore a promising approach for biological nutrient recovery.

  2. STOCHASTIC DISCRETE MODEL OF TWO-STAGE ISOLATION SYSTEM WITH RIGID LIMITERS

    Institute of Scientific and Technical Information of China (English)

    HE Hua; FENG Qi; SHEN Rong-ying; WANG Yu

    2006-01-01

    The possible intermittent impacts of a two-stage isolation system with rigid limiters have been investigated. The isolation system is under periodic external excitation disturbed by small stationary Gaussian white noise after shock. The maximal impact Then in the period after shock, the zero order approximate stochastic discrete model and the first order approximate stochastic model are developed. The real isolation system of an MTU diesel engine is used to evaluate the established model. After calculating of the numerical example, the effects of noise excitation on the isolation system are discussed.The results show that the property of the system is complicated due to intermittent impact. The difference between zero order model and the first order model may be great.The effect of small noise is obvious. The results may be expected useful to the naval designers.

  3. Two-stage high frequency pulse tube cooler for refrigeration at 25 K

    CERN Document Server

    Dietrich, M

    2009-01-01

    A two-stage Stirling-type U-shape pulse tube cryocooler driven by a 10 kW-class linear compressor was designed, built and tested. A special feature of the cold head is the absence of a heat exchanger at the cold end of the first stage, since the intended application requires no cooling power at an intermediate temperature. Simulations where done using Sage-software to find optimum operating conditions and cold head geometry. Flow-impedance matching was required to connect the compressor designed for 60 Hz operation to the 40 Hz cold head. A cooling power of 12.9 W at 25 K with an electrical input power of 4.6 kW has been achieved up to now. The lowest temperature reached is 13.7 K.

  4. Two-stage reflective optical system for achromatic 10 nm x-ray focusing

    Science.gov (United States)

    Motoyama, Hiroto; Mimura, Hidekazu

    2015-12-01

    Recently, coherent x-ray sources have promoted developments of optical systems for focusing, imaging, and interferometers. In this paper, we propose a two-stage focusing optical system with the goal of achromatically focusing pulses from an x-ray free-electron laser (XFEL), with a focal width of 10 nm. In this optical system, the x-ray beam is expanded by a grazing-incidence aspheric mirror, and it is focused by a mirror that is shaped as a solid of revolution. We describe the design procedure and discuss the theoretical focusing performance. In theory, soft-XFEL lights can be focused to a 10 nm area without chromatic aberration and with high reflectivity; this creates an unprecedented power density of 1020 W cm-2 in the soft-x-ray range.

  5. Prey-Predator Model with Two-Stage Infection in Prey: Concerning Pest Control

    Directory of Open Access Journals (Sweden)

    Swapan Kumar Nandi

    2015-01-01

    Full Text Available A prey-predator model system is developed; specifically the disease is considered into the prey population. Here the prey population is taken as pest and the predators consume the selected pest. Moreover, we assume that the prey species is infected with a viral disease forming into susceptible and two-stage infected classes, and the early stage of infected prey is more vulnerable to predation by the predator. Also, it is assumed that the later stage of infected pests is not eaten by the predator. Different equilibria of the system are investigated and their stability analysis and Hopf bifurcation of the system around the interior equilibriums are discussed. A modified model has been constructed by considering some alternative source of food for the predator population and the dynamical behavior of the modified model has been investigated. We have demonstrated the analytical results by numerical analysis by taking some simulated set of parameter values.

  6. Shaft Position Influence on Technical Characteristics of Universal Two-Stages Helical Speed Reducers

    Directory of Open Access Journals (Sweden)

    Мilan Rackov

    2005-10-01

    Full Text Available Purchasers of speed reducers decide on buying those reducers, that can the most approximately satisfy their demands with much smaller costs. Amount of used material, ie. mass and dimensions of gear unit influences on gear units price. Mass and dimensions of gear unit, besides output torque, gear unit ratio and efficiency, are the most important parameters of technical characteristics of gear units and their quality. Centre distance and position of shafts have significant influence on output torque, gear unit ratio and mass of gear unit through overall dimension of gear unit housing. Thus these characteristics are dependent on each other. This paper deals with analyzing of centre distance and shaft position influence on output torque and ratio of universal two stages gear units.

  7. Alignment and characterization of the two-stage time delay compensating XUV monochromator

    CERN Document Server

    Eckstein, Martin; Kubin, Markus; Yang, Chung-Hsin; Frassetto, Fabio; Poletto, Luca; Vrakking, Marc J J; Kornilov, Oleg

    2016-01-01

    We present the design, implementation and alignment procedure for a two-stage time delay compensating monochromator. The setup spectrally filters the radiation of a high-order harmonic generation source providing wavelength-selected XUV pulses with a bandwidth of 300 to 600~meV in the photon energy range of 3 to 50~eV. XUV pulses as short as $12\\pm3$~fs are demonstrated. Transmission of the 400~nm (3.1~eV) light facilitates precise alignment of the monochromator. This alignment strategy together with the stable mechanical design of the motorized beamline components enables us to automatically scan the XUV photon energ in pump-probe experiments that require XUV beam pointing stability. The performance of the beamline is demonstrated by the generation of IR-assisted sidebands in XUV photoionization of argon atoms.

  8. Final two-stage MOAO on-sky demonstration with CANARY

    Science.gov (United States)

    Gendron, E.; Morris, T.; Basden, A.; Vidal, F.; Atkinson, D.; Bitenc, U.; Buey, T.; Chemla, F.; Cohen, M.; Dickson, C.; Dipper, N.; Feautrier, P.; Gach, J.-L.; Gratadour, D.; Henry, D.; Huet, J.-M.; Morel, C.; Morris, S.; Myers, R.; Osborn, J.; Perret, D.; Reeves, A.; Rousset, G.; Sevin, A.; Stadler, E.; Talbot, G.; Todd, S.; Younger, E.

    2016-07-01

    CANARY is an on-sky Laser Guide Star (LGS) tomographic AO demonstrator in operation at the 4.2m William Herschel Telescope (WHT) in La Palma. From the early demonstration of open-loop tomography on a single deformable mirror using natural guide stars in 2010, CANARY has been progressively upgraded each year to reach its final goal in July 2015. It is now a two-stage system that mimics the future E-ELT: a GLAO-driven woofer based on 4 laser guide stars delivers a ground-layer compensated field to a figure sensor locked tweeter DM, that achieves the final on-axis tomographic compensation. We present the overall system, the control strategy and an overview of its on-sky performance.

  9. Performance of a highly loaded two stage axial-flow fan

    Science.gov (United States)

    Ruggeri, R. S.; Benser, W. A.

    1974-01-01

    A two-stage axial-flow fan with a tip speed of 1450 ft/sec (442 m/sec) and an overall pressure ratio of 2.8 was designed, built, and tested. At design speed and pressure ratio, the measured flow matched the design value of 184.2 lbm/sec (83.55kg/sec). The adiabatic efficiency at the design operating point was 85.7 percent. The stall margin at design speed was 10 percent. A first-bending-mode flutter of the second-stage rotor blades was encountered near stall at speeds between 77 and 93 percent of design, and also at high pressure ratios at speeds above 105 percent of design. A 5 deg closed reset of the first-stage stator eliminated second-stage flutter for all but a narrow speed range near 90 percent of design.

  10. A Two-stage Kalman Filter for Sensorless Direct Torque Controlled PM Synchronous Motor Drive

    Directory of Open Access Journals (Sweden)

    Boyu Yi

    2013-01-01

    Full Text Available This paper presents an optimal two-stage extended Kalman filter (OTSEKF for closed-loop flux, torque, and speed estimation of a permanent magnet synchronous motor (PMSM to achieve sensorless DTC-SVPWM operation of drive system. The novel observer is obtained by using the same transformation as in a linear Kalman observer, which is proposed by C.-S. Hsieh and F.-C. Chen in 1999. The OTSEKF is an effective implementation of the extended Kalman filter (EKF and provides a recursive optimum state estimation for PMSMs using terminal signals that may be polluted by noise. Compared to a conventional EKF, the OTSEKF reduces the number of arithmetic operations. Simulation and experimental results verify the effectiveness of the proposed OTSEKF observer for DTC of PMSMs.

  11. a Remote Liquid Target Loading System for a Two-Stage Gas Gun

    Science.gov (United States)

    Gibson, L. L.; Bartram, B.; Dattelbaum, D. M.; Sheffield, S. A.; Stahl, D. B.

    2009-12-01

    A Remote Liquid Loading System (RLLS) was designed and tested for the application of loading high-hazard liquid materials into instrumented target cells for gas gun-driven plate impact experiments. These high hazard liquids tend to react with confining materials in a short period of time, degrading target assemblies and potentially building up pressure through the evolution of gas in the reactions. Therefore, the ability to load a gas gun target immediately prior to gun firing provides the most stable and reliable target fielding approach. We present the design and evaluation of an RLLS built for the LANL two-stage gas gun. The system has been used successfully to interrogate the shock initiation behavior of ˜98 wt% percent hydrogen peroxide (H2O2) solutions, using embedded electromagnetic gauges for measurement of shock wave profiles in-situ.

  12. Two-Stage Surgery for a Large Cervical Dumbbell Tumour in Neurofibromatosis 1: A Case Report

    Directory of Open Access Journals (Sweden)

    Mohd Ariff S

    2011-11-01

    Full Text Available Spinal neurofibromas occur sporadically and typically occur in association with neurofibromatosis 1. Patients afflicted with neurofibromatosis 1 usually present with involvement of several nerve roots. This report describes the case of a 14- year-old child with a large intraspinal, but extradural tumour with paraspinal extension, dumbbell neurofibroma of the cervical region extending from the C2 to C4 vertebrae. The lesions were readily detected by MR imaging and were successfully resected in a two-stage surgery. The time interval between the first and second surgery was one month. We provide a brief review of the literature regarding various surgical approaches, emphasising the utility of anterior and posterior approaches.

  13. Parametric theoretical study of a two-stage solar organic Rankine cycle for RO desalination

    Energy Technology Data Exchange (ETDEWEB)

    Kosmadakis, G.; Manolakos, D.; Papadakis, G. [Department of Natural Resources and Agricultural Engineering, Agricultural University of Athens, 75 Iera Odos Street, 11855 Athens (Greece)

    2010-05-15

    The present work concerns the parametric study of an autonomous, two-stage solar organic Rankine cycle for RO desalination. The main goal of the current simulation is to estimate the efficiency, as well as to calculate the annual mechanical energy available for desalination in the considered cases, in order to evaluate the influence of various parameters on the performance of the system. The parametric study concerns the variation of different parameters, without changing actually the baseline case. The effect of the collectors' slope and the total number of evacuated tube collectors used, have been extensively examined. The total cost is also taken into consideration and is calculated for the different cases examined, along with the specific fresh water cost (EUR/m{sup 3}). (author)

  14. Modeling and Implementing Two-Stage AdaBoost for Real-Time Vehicle License Plate Detection

    Directory of Open Access Journals (Sweden)

    Moon Kyou Song

    2014-01-01

    Full Text Available License plate (LP detection is the most imperative part of the automatic LP recognition system. In previous years, different methods, techniques, and algorithms have been developed for LP detection (LPD systems. This paper proposes to automatical detection of car LPs via image processing techniques based on classifier or machine learning algorithms. In this paper, we propose a real-time and robust method for LPD systems using the two-stage adaptive boosting (AdaBoost algorithm combined with different image preprocessing techniques. Haar-like features are used to compute and select features from LP images. The AdaBoost algorithm is used to classify parts of an image within a search window by a trained strong classifier as either LP or non-LP. Adaptive thresholding is used for the image preprocessing method applied to those images that are of insufficient quality for LPD. This method is of a faster speed and higher accuracy than most of the existing methods used in LPD. Experimental results demonstrate that the average LPD rate is 98.38% and the computational time is approximately 49 ms.

  15. Removal of trichloroethylene (TCE) contaminated soil using a two-stage anaerobic-aerobic composting technique.

    Science.gov (United States)

    Ponza, Supat; Parkpian, Preeda; Polprasert, Chongrak; Shrestha, Rajendra P; Jugsujinda, Aroon

    2010-01-01

    The effect of organic carbon addition on remediation of trichloroethylene (TCE) contaminated clay soil was investigated using a two stage anaerobic-aerobic composting system. TCE removal rate and processes involved were determined. Uncontaminated clay soil was treated with composting materials (dried cow manure, rice husk and cane molasses) to represent carbon based treatments (5%, 10% and 20% OC). All treatments were spiked with TCE at 1,000 mg TCE/kg DW and incubated under anaerobic and mesophillic condition (35 degrees C) for 8 weeks followed by continuous aerobic condition for another 6 weeks. TCE dissipation, its metabolites and biogas composition were measured throughout the experimental period. Results show that TCE degradation depended upon the amount of organic carbon (OC) contained within the composting treatments/matrices. The highest TCE removal percentage (97%) and rate (75.06 micro Mole/kg DW/day) were obtained from a treatment of 10% OC composting matrices as compared to 87% and 27.75 micro Mole/kg DW/day for 20% OC, and 83% and 38.08 micro Mole/kg DW/day for soil control treatment. TCE removal rate was first order reaction kinetics. Highest degradation rate constant (k(1) = 0.035 day(- 1)) was also obtained from the 10% OC treatment, followed by 20% OC (k(1) = 0.026 day(- 1)) and 5% OC or soil control treatment (k(1) = 0.023 day(- 1)). The half-life was 20, 27 and 30 days, respectively. The overall results suggest that sequential two stages anaerobic-aerobic composting technique has potential for remediation of TCE in heavy texture soil, providing that easily biodegradable source of organic carbon is present.

  16. Two-Stage Surgical Treatment for Non-Union of a Shortened Osteoporotic Femur

    Directory of Open Access Journals (Sweden)

    Galal Zaki Said

    2013-01-01

    Full Text Available Introduction: We report a case of non-union with severe shortening of the femur following diaphysectomy for chronic osteomyelitis.Case Presentation: A boy, aged 16 years presented with a dangling and excessively short left lower limb. He was using an elbow crutch in his right hand to help him walk. He had a history of diaphysectomy for chronic osteomyelitis at the age of 9. Examination revealed a freely mobile non-union of the left femur. The femur was the seat of an 18 cm shortening and a 4 cm defect at the non-union site; the knee joint was ankylosed in extension. The tibia and fibula were 10 cm short. Considering the extensive shortening in the femur and tibia in addition to osteoporosis, he was treated in two stages. In stage I, the femoral non-union was treated by open reduction, internal fixation and iliac bone grafting. The patient was then allowed to walk with full weight bearing in an extension brace for 7 months. In Stage II, equalization of leg length discrepancy (LLD was achieved by simultaneous distraction of the femur and tibia by unilateral frames. At the 6 month follow- up, he was fully weight bearing without any walking aid, with a heel lift to compensate the 1.5 cm shortening. Three years later he reported that he was satisfied with the result of treatment and was leading a normal life as a university student.Conclusions: Two-stage treatment succeeded to restore about 20 cm of the femoral shortening in a severely osteoporotic bone. It has also succeeded in reducing the treatment time of the external fixator.

  17. Mineral chemistry of the Tissint meteorite: Indications of two-stage crystallization in a closed system

    Science.gov (United States)

    Liu, Yang; Baziotis, Ioannis P.; Asimow, Paul D.; Bodnar, Robert J.; Taylor, Lawrence A.

    2016-12-01

    The Tissint meteorite is a geochemically depleted, olivine-phyric shergottite. Olivine megacrysts contain 300-600 μm cores with uniform Mg# ( 80 ± 1) followed by concentric zones of Fe-enrichment toward the rims. We applied a number of tests to distinguish the relationship of these megacrysts to the host rock. Major and trace element compositions of the Mg-rich core in olivine are in equilibrium with the bulk rock, within uncertainty, and rare earth element abundances of melt inclusions in Mg-rich olivines reported in the literature are similar to those of the bulk rock. Moreover, the P Kα intensity maps of two large olivine grains show no resorption between the uniform core and the rim. Taken together, these lines of evidence suggest the olivine megacrysts are phenocrysts. Among depleted olivine-phyric shergottites, Tissint is the first one that acts mostly as a closed system with olivine megacrysts being the phenocrysts. The texture and mineral chemistry of Tissint indicate a crystallization sequence of: olivine (Mg# 80 ± 1) → olivine (Mg# 76) + chromite → olivine (Mg# 74) + Ti-chromite → olivine (Mg# 74-63) + pyroxene (Mg# 76-65) + Cr-ulvöspinel → olivine (Mg# 63-35) + pyroxene (Mg# 65-60) + plagioclase, followed by late-stage ilmenite and phosphate. The crystallization of the Tissint meteorite likely occurred in two stages: uniform olivine cores likely crystallized under equilibrium conditions; and a fractional crystallization sequence that formed the rest of the rock. The two-stage crystallization without crystal settling is simulated using MELTS and the Tissint bulk composition, and can broadly reproduce the crystallization sequence and mineral chemistry measured in the Tissint samples. The transition between equilibrium and fractional crystallization is associated with a dramatic increase in cooling rate and might have been driven by an acceleration in the ascent rate or by encounter with a steep thermal gradient in the Martian crust.

  18. Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys

    Science.gov (United States)

    Murray, R.; Rastegar, J.

    2009-03-01

    Harvesting mechanical energy from ocean wave oscillations for conversion to electrical energy has long been pursued as an alternative or self-contained power source. The attraction to harvesting energy from ocean waves stems from the sheer power of the wave motion, which can easily exceed 50 kW per meter of wave front. The principal barrier to harvesting this power is the very low and varying frequency of ocean waves, which generally vary from 0.1Hz to 0.5Hz. In this paper the application of a novel class of two-stage electrical energy generators to buoyant structures is presented. The generators use the buoy's interaction with the ocean waves as a low-speed input to a primary system, which, in turn, successively excites an array of vibratory elements (secondary system) into resonance - like a musician strumming a guitar. The key advantage of the present system is that by having two decoupled systems, the low frequency and highly varying buoy motion is converted into constant and much higher frequency mechanical vibrations. Electrical energy may then be harvested from the vibrating elements of the secondary system with high efficiency using piezoelectric elements. The operating principles of the novel two-stage technique are presented, including analytical formulations describing the transfer of energy between the two systems. Also, prototypical design examples are offered, as well as an in-depth computer simulation of a prototypical heaving-based wave energy harvester which generates electrical energy from the up-and-down motion of a buoy riding on the ocean's surface.

  19. A two stage algorithm for target and suspect analysis of produced water via gas chromatography coupled with high resolution time of flight mass spectrometry.

    Science.gov (United States)

    Samanipour, Saer; Langford, Katherine; Reid, Malcolm J; Thomas, Kevin V

    2016-09-09

    Gas chromatography coupled with high resolution time of flight mass spectrometry (GC-HR-TOFMS) has gained popularity for the target and suspect analysis of complex samples. However, confident detection of target/suspect analytes in complex samples, such as produced water, remains a challenging task. Here we report on the development and validation of a two stage algorithm for the confident target and suspect analysis of produced water extracts. We performed both target and suspect analysis for 48 standards, which were a mixture of 28 aliphatic hydrocarbons and 20 alkylated phenols, in 3 produced water extracts. The two stage algorithm produces a chemical standard database of spectra, in the first stage, which is used for target and suspect analysis during the second stage. The first stage is carried out through five steps via an algorithm here referred to as unique ion extractor (UIE). During the first step the m/z values in the spectrum of a standard that do not belong to that standard are removed in order to produce a clean spectrum and then during the last step the cleaned spectrum is calibrated. The Dot-product algorithm, during the second stage, uses the cleaned and calibrated spectra of the standards for both target and suspect analysis. We performed the target analysis of 48 standards in all 3 samples via conventional methods, in order to validate the two stage algorithm. The two stage algorithm was demonstrated to be more robust, reliable, and less sensitive to the signal-to-noise ratio (S/N), when compared to the conventional method. The Dot-product algorithm showed lower potential in producing false positives compared to the conventional methods, when dealing with complex samples. We also evaluated the effect of the mass accuracy on the performances of Dot-product algorithm. Our results indicated the crucial importance of HR-MS data and the mass accuracy for confident suspect analysis in complex samples.

  20. Experimental and numerical studies on two-stage combustion of biomass

    Energy Technology Data Exchange (ETDEWEB)

    Houshfar, Eshan

    2012-07-01

    In this thesis, two-stage combustion of biomass was experimentally/numerically investigated in a multifuel reactor. The following emissions issues have been the main focus of the work: 1- NOx and N2O 2- Unburnt species (CO and CxHy) 3- Corrosion related emissions.The study had a focus on two-stage combustion in order to reduce pollutant emissions (primarily NOx emissions). It is well known that pollutant emissions are very dependent on the process conditions such as temperature, reactant concentrations and residence times. On the other hand, emissions are also dependent on the fuel properties (moisture content, volatiles, alkali content, etc.). A detailed study of the important parameters with suitable biomass fuels in order to optimize the various process conditions was performed. Different experimental studies were carried out on biomass fuels in order to study the effect of fuel properties and combustion parameters on pollutant emissions. Process conditions typical for biomass combustion processes were studied. Advanced experimental equipment was used in these studies. The experiments showed the effects of staged air combustion, compared to non-staged combustion, on the emission levels clearly. A NOx reduction of up to 85% was reached with staged air combustion using demolition wood as fuel. An optimum primary excess air ratio of 0.8-0.95 was found as a minimizing parameter for the NOx emissions for staged air combustion. Air staging had, however, a negative effect on N2O emissions. Even though the trends showed a very small reduction in the NOx level as temperature increased for non-staged combustion, the effect of temperature was not significant for NOx and CxHy, neither in staged air combustion or non-staged combustion, while it had a great influence on the N2O and CO emissions, with decreasing levels with increasing temperature. Furthermore, flue gas recirculation (FGR) was used in combination with staged combustion to obtain an enhanced NOx reduction. The

  1. Enhancement of bioenergy production from organic wastes by two-stage anaerobic hydrogen and methane production process

    DEFF Research Database (Denmark)

    Luo, Gang; Xie, Li; Zhou, Qi

    2011-01-01

    The present study investigated a two-stage anaerobic hydrogen and methane process for increasing bioenergy production from organic wastes. A two-stage process with hydraulic retention time (HRT) 3d for hydrogen reactor and 12d for methane reactor, obtained 11% higher energy compared to a single......-stage methanogenic process (HRT 15d) under organic loading rate (OLR) 3gVS/(Ld). The two-stage process was still stable when the OLR was increased to 4.5gVS/(Ld), while the single-stage process failed. The study further revealed that by changing the HRThydrogen:HRTmethane ratio of the two-stage process from 3...

  2. Differentiating the persistency and permanency of some two stages DNA splicing language via Yusof-Goode (Y-G) approach

    Science.gov (United States)

    Mudaber, M. H.; Yusof, Y.; Mohamad, M. S.

    2017-09-01

    Predicting the existence of restriction enzymes sequences on the recombinant DNA fragments, after accomplishing the manipulating reaction, via mathematical approach is considered as a convenient way in terms of DNA recombination. In terms of mathematics, for this characteristic of the recombinant DNA strands, which involve the recognition sites of restriction enzymes, is called persistent and permanent. Normally differentiating the persistency and permanency of two stages recombinant DNA strands using wet-lab experiment is expensive and time-consuming due to running the experiment at two stages as well as adding more restriction enzymes on the reaction. Therefore, in this research, by using Yusof-Goode (Y-G) model the difference between persistent and permanent splicing language of some two stages is investigated. Two theorems were provided, which show the persistency and non-permanency of two stages DNA splicing language.

  3. A two-stage logistic regression-ANN model for the prediction of distress banks: Evidence from 11 emerging countries

    National Research Council Canada - National Science Library

    Shu Ling Lin

    2010-01-01

      This paper proposes a new approach of two-stage hybrid model of logistic regression-ANN for the construction of a financial distress warning system for banking industry in emerging market during 1998-2006...

  4. Rapid fabrication of self-ordered porous alumina with 10-/sub-10-nm-scale nanostructures by selenic acid anodizing.

    Science.gov (United States)

    Nishinaga, Osamu; Kikuchi, Tatsuya; Natsui, Shungo; Suzuki, Ryosuke O

    2013-09-25

    Anodic porous alumina has been widely investigated and used as a nanostructure template in various nanoapplications. The porous structure consists of numerous hexagonal cells perpendicular to the aluminum substrate and each cell has several tens or hundreds of nanoscale pores at its center. Because the nanomorphology of anodic porous alumina is limited by the electrolyte during anodizing, the discovery of additional electrolytes would expand the applicability of porous alumina. In this study, we report a new self-ordered nanoporous alumina formed by selenic acid (H2SeO4) anodizing. By optimizing the anodizing conditions, anodic alumina possessing 10-nm-scale pores was rapidly assembled (within 1 h) during selenic acid anodizing without any special electrochemical equipment. Novel sub-10-nm-scale spacing can also be achieved by selenic acid anodizing and metal sputter deposition. Our new nanoporous alumina can be used as a nanotemplate for various nanostructures in 10-/sub-10-nm-scale manufacturing.

  5. Uptake and speciation of selenium in garlic cultivated in soil amended with symbiotic fungi (mycorrhiza) and selenate

    DEFF Research Database (Denmark)

    Larsen, Erik Huusfeldt; Lobinski, R.; Burger-Meyer, K.

    2006-01-01

    The scope of the work was to investigate the influence of selenate fertilisation and the addition of symbiotic fungi (mycorrhiza) to soil on selenium and selenium species concentrations in garlic. The selenium species were extracted from garlic cultivated in experimental plots by proteolytic...... in garlic. The selenium content in garlic, which was analysed by ICP-MS, showed that addition of mycorrhiza to the natural soil increased the selenium uptake by garlic tenfold to 15 mu g g(-1) (dry mass). Fertilisation with selenate and addition of mycorrhiza strongly increased the selenium content...... in garlic to around one part per thousand. The parallel analysis of the sample extracts by cation exchange and reversed-phase HPLC with ICP-MS detection showed that gamma-glutamyl-Se-methyl-selenocysteine amounted to 2/3, whereas methylselenocysteine, selenomethionine and selenate each amounted to a few...

  6. Hydrogen and methane production from condensed molasses fermentation soluble by a two-stage anaerobic process

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Chiu-Yue; Liang, You-Chyuan; Lay, Chyi-How [Feng Chia Univ., Taichung, Taiwan (China). Dept. of Environmental Engineering and Science; Chen, Chin-Chao [Chungchou Institute of Technology, Taiwan (China). Environmental Resources Lab.; Chang, Feng-Yuan [Feng Chia Univ., Taichung, Taiwan (China). Research Center for Energy and Resources

    2010-07-01

    The treatment of condensed molasses fermentation soluble (CMS) is a troublesome problem for glutamate manufacturing factory. However, CMS contains high carbohydrate and nutrient contents and is an attractive and commercially potential feedstock for bioenergy production. The aim of this paper is to produce hydrogen and methane by two-stage anaerobic fermentation process. The fermentative hydrogen production from CMS was conducted in a continuously-stirred tank bioreactor (working volume 4 L) which was operated at a hydraulic retention time (HRT) of 8 h, organic loading rate (OLR) of 120 kg COD/m{sup 3}-d, temperature of 35 C, pH 5.5 and sewage sludge as seed. The anaerobic methane production was conducted in an up-flow bioreactor (working volume 11 L) which was operated at a HRT of 24 -60 hrs, OLR of 4.0-10 kg COD/m{sup 3}-d, temperature of 35 C, pH 7.0 with using anaerobic granule sludge from fructose manufacturing factory as the seed and the effluent from hydrogen production process as the substrate. These two reactors have been operated successfully for more than 400 days. The steady-state hydrogen content, hydrogen production rate and hydrogen production yield in the hydrogen fermentation system were 37%, 169 mmol-H{sub 2}/L-d and 93 mmol-H{sub 2}/g carbohydrate{sub removed}, respectively. In the methane fermentation system, the peak methane content and methane production rate were 66.5 and 86.8 mmol-CH{sub 4}/L-d with methane production yield of 189.3 mmol-CH{sub 4}/g COD{sub removed} at an OLR 10 kg/m{sup 3}-d. The energy production rate was used to elucidate the energy efficiency for this two-stage process. The total energy production rate of 133.3 kJ/L/d was obtained with 5.5 kJ/L/d from hydrogen fermentation and 127.8 kJ/L/d from methane fermentation. (orig.)

  7. Hydrogen production from cellulose in a two-stage process combining fermentation and electrohydrogenesis

    KAUST Repository

    Lalaurette, Elodie

    2009-08-01

    A two-stage dark-fermentation and electrohydrogenesis process was used to convert the recalcitrant lignocellulosic materials into hydrogen gas at high yields and rates. Fermentation using Clostridium thermocellum produced 1.67 mol H2/mol-glucose at a rate of 0.25 L H2/L-d with a corn stover lignocellulose feed, and 1.64 mol H2/mol-glucose and 1.65 L H2/L-d with a cellobiose feed. The lignocelluose and cellobiose fermentation effluent consisted primarily of: acetic, lactic, succinic, and formic acids and ethanol. An additional 800 ± 290 mL H2/g-COD was produced from a synthetic effluent with a wastewater inoculum (fermentation effluent inoculum; FEI) by electrohydrogensis using microbial electrolysis cells (MECs). Hydrogen yields were increased to 980 ± 110 mL H2/g-COD with the synthetic effluent by combining in the inoculum samples from multiple microbial fuel cells (MFCs) each pre-acclimated to a single substrate (single substrate inocula; SSI). Hydrogen yields and production rates with SSI and the actual fermentation effluents were 980 ± 110 mL/g-COD and 1.11 ± 0.13 L/L-d (synthetic); 900 ± 140 mL/g-COD and 0.96 ± 0.16 L/L-d (cellobiose); and 750 ± 180 mL/g-COD and 1.00 ± 0.19 L/L-d (lignocellulose). A maximum hydrogen production rate of 1.11 ± 0.13 L H2/L reactor/d was produced with synthetic effluent. Energy efficiencies based on electricity needed for the MEC using SSI were 270 ± 20% for the synthetic effluent, 230 ± 50% for lignocellulose effluent and 220 ± 30% for the cellobiose effluent. COD removals were ∼90% for the synthetic effluents, and 70-85% based on VFA removal (65% COD removal) with the cellobiose and lignocellulose effluent. The overall hydrogen yield was 9.95 mol-H2/mol-glucose for the cellobiose. These results show that pre-acclimation of MFCs to single substrates improves performance with a complex mixture of substrates, and that high hydrogen yields and gas production rates can be achieved using a two-stage fermentation and MEC

  8. A farm-scale pilot plant for biohydrogen and biomethane production by two-stage fermentation

    Directory of Open Access Journals (Sweden)

    R. Oberti

    2013-09-01

    Full Text Available Hydrogen is considered one of the possible main energy carriers for the future, thanks to its unique environmental properties. Indeed, its energy content (120 MJ/kg can be exploited virtually without emitting any exhaust in the atmosphere except for water. Renewable production of hydrogen can be obtained through common biological processes on which relies anaerobic digestion, a well-established technology in use at farm-scale for treating different biomass and residues. Despite two-stage hydrogen and methane producing fermentation is a simple variant of the traditional anaerobic digestion, it is a relatively new approach mainly studied at laboratory scale. It is based on biomass fermentation in two separate, seuqential stages, each maintaining conditions optimized to promote specific bacterial consortia: in the first acidophilic reactorhydrogen is produced production, while volatile fatty acids-rich effluent is sent to the second reactor where traditional methane rich biogas production is accomplished. A two-stage pilot-scale plant was designed, manufactured and installed at the experimental farm of the University of Milano and operated using a biomass mixture of livestock effluents mixed with sugar/starch-rich residues (rotten fruits and potatoes and expired fruit juices, afeedstock mixture based on waste biomasses directly available in the rural area where plant is installed. The hydrogenic and the methanogenic reactors, both CSTR type, had a total volume of 0.7m3 and 3.8 m3 respectively, and were operated in thermophilic conditions (55 2 °C without any external pH control, and were fully automated. After a brief description of the requirements of the system, this contribution gives a detailed description of its components and of engineering solutions to the problems encountered during the plant realization and start-up. The paper also discusses the results obtained in a first experimental run which lead to production in the range of previous

  9. Adaptive Urban Stormwater Management Using a Two-stage Stochastic Optimization Model

    Science.gov (United States)

    Hung, F.; Hobbs, B. F.; McGarity, A. E.

    2014-12-01

    In many older cities, stormwater results in combined sewer overflows (CSOs) and consequent water quality impairments. Because of the expense of traditional approaches for controlling CSOs, cities are considering the use of green infrastructure (GI) to reduce runoff and pollutants. Examples of GI include tree trenches, rain gardens, green roofs, and rain barrels. However, the cost and effectiveness of GI are uncertain, especially at the watershed scale. We present a two-stage stochastic extension of the Stormwater Investment Strategy Evaluation (StormWISE) model (A. McGarity, JWRPM, 2012, 111-24) to explicitly model and optimize these uncertainties in an adaptive management framework. A two-stage model represents the immediate commitment of resources ("here & now") followed by later investment and adaptation decisions ("wait & see"). A case study is presented for Philadelphia, which intends to extensively deploy GI over the next two decades (PWD, "Green City, Clean Water - Implementation and Adaptive Management Plan," 2011). After first-stage decisions are made, the model updates the stochastic objective and constraints (learning). We model two types of "learning" about GI cost and performance. One assumes that learning occurs over time, is automatic, and does not depend on what has been done in stage one (basic model). The other considers learning resulting from active experimentation and learning-by-doing (advanced model). Both require expert probability elicitations, and learning from research and monitoring is modelled by Bayesian updating (as in S. Jacobi et al., JWRPM, 2013, 534-43). The model allocates limited financial resources to GI investments over time to achieve multiple objectives with a given reliability. Objectives include minimizing construction and O&M costs; achieving nutrient, sediment, and runoff volume targets; and community concerns, such as aesthetics, CO2 emissions, heat islands, and recreational values. CVaR (Conditional Value at Risk) and

  10. First Law Analysis of a Two-stage Ejector-vapor Compression Refrigeration Cycle working with R404A

    OpenAIRE

    Feiza Memet; Daniela-Elena Mitu

    2011-01-01

    The traditional two-stage vapor compression refrigeration cycle might be replaced by a two-stage ejector-vapor compression refrigeration cycle if it is aimed the decrease of irreversibility during expansion. In this respect, the expansion valve is changed with an ejector. The performance improvement is searched in the case of choosing R404A as a refrigerant. Using the ejector as an expansion device ensures a higher value for COP compared to the traditional case. On the basis...

  11. Considerations Regarding Age at Surgery and Fistula Incidence Using One- and Two-stage Closure for Cleft Palate

    OpenAIRE

    Simona Stoicescu; Dm Enescu

    2013-01-01

    Introduction: Although cleft lip and palate (CLP) is one of the most common congenital malformations, occurring in 1 in 700 live births, there is still no generally accepted treatment protocol. Numerous surgical techniques have been described for cleft palate repair; these techniques can be divided into one-stage (one operation) cleft palate repair and two-stage cleft palate closure. The aim of this study is to present our cleft palate team experience in using the two-stage cleft palate closu...

  12. [Uptake and translocation of selenate or selenite by wheat and rice seedlings].

    Science.gov (United States)

    Chen, Si-Yang; Jiang, Rong-Feng; Li, Hua-Fen

    2011-01-01

    Solution culture experiments were carried out to study the uptake and translocation of selenate (Na2SeO4) or selenite (Na2SeO3) by wheat and rice seedlings. When supplied with Na2SeO4 in nutrient solution, the concentrations of selenium (Se) in normal shoots and roots of rice were 30.3 mg x kg(-1) and 39.0 mg x kg(-1) respectively, and the absorbed Se was quickly translocated to shoots accounting for 80% of the total uptake. Se concentrations in wheat shoots and roots were 1.76 mg x kg(-1) and 6.99 mg x kg(-1) respectively, accounting for 62% in shoots. However, when supplied with Na2SeO3, Se concentrations in shoots and roots of rice were 4.40 mg x kg(-1) and 230 mg x kg(-1) respectively, 1.24 mg x kg(-1) and 88.3 mg x kg(-1) in shoots and roots of wheat respectively, and only 8.2% was transferred to shoots. The influence of phosphorus (P) starvation on Se uptake was different for rice and wheat seedlings. Comparing to normal plants, the Se concentrations in the shoots and roots of rice under P starvation condition were decreased, however increased for wheat. In Na2SeO3 uptake kinetics, K(m) of wheat seedlings was 8.7 folds of that of rice, and the affinity of wheat root to selenite was much weaker than that of rice. The Se uptake rate of wheat (V(max)) was 14% lower than that of rice. The uptake and translocation mechanisms of selenate and selenite by rice and wheat seedlings were revealed. And the results demonstrate that the absorbed selenate is quickly translocated to shoot and selenite is mainly accumulated in root. These results provide basic information for biofortification of crops with Se.

  13. Two-stage combustion, a new concept in reducing alkali related operational problem; Tvaastegsfoerbraenning, ett nytt koncept att minska alkalirelaterad driftproblematik

    Energy Technology Data Exchange (ETDEWEB)

    Hjoernhede, Anders; Hermansson, Sven; Seemann, Martin; Alamia, Alberto; Larsson, Anton; Davidsson, Kent; Niklasson, Fredrik; Atongka Tchoffor, Placid; Jones, Frida

    2012-07-01

    devolatilization or char conversion rely on if the alkali is bound organically to the fuel or as soluble or non-soluble salts. Chemical fractionation could, therefore, possibly be used as analysis method for the suitability of a fuel to be used in two-stage conversion. Future trials and investigations of two-stage conversion for separation of a alkali-lean gas of with the devolatilization should, hence, be preceded by chemical fractionation and limited to fuels that are expected to release alkaloids during the char conversion.

  14. CZTSe solar cells prepared by electrodeposition of Cu/Sn/Zn stack layer followed by selenization at low Se pressure

    Science.gov (United States)

    Yao, Liyong; Ao, Jianping; Jeng, Ming-Jer; Bi, Jinlian; Gao, Shoushuai; He, Qing; Zhou, Zhiqiang; Sun, Guozhong; Sun, Yun; Chang, Liann-Be; Chen, Jian-Wun

    2014-12-01

    Cu2ZnSnSe4 (CZTSe) thin films are prepared by the electrodeposition of stack copper/tin/zinc (Cu/Sn/Zn) precursors, followed by selenization with a tin source at a substrate temperature of 530°C. Three selenization processes were performed herein to study the effects of the source of tin on the quality of CZTSe thin films that are formed at low Se pressure. Much elemental Sn is lost from CZTSe thin films during selenization without a source of tin. The loss of Sn from CZTSe thin films in selenization was suppressed herein using a tin source at 400°C (A2) or 530°C (A3). A copper-poor and zinc-rich CZTSe absorber layer with Cu/Sn, Zn/Sn, Cu/(Zn + Sn), and Zn/(Cu + Zn + Sn) with metallic element ratios of 1.86, 1.24, 0.83, and 0.3, respectively, was obtained in a selenization with a tin source at 530°C. The crystallized CZTSe thin film exhibited an increasingly (112)-preferred orientation at higher tin selenide (SnSe x ) partial pressure. The lack of any obvious Mo-Se phase-related diffraction peaks in the X-ray diffraction (XRD) diffraction patterns may have arisen from the low Se pressure in the selenization processes. The scanning electron microscope (SEM) images reveal a compact surface morphology and a moderate grain size. CZTSe solar cells with an efficiency of 4.81% were produced by the low-cost fabrication process that is elucidated herein.

  15. Kinetics of selenate sorption in soil as influenced by biotic and abiotic conditions: a stirred flow-through reactor study.

    Science.gov (United States)

    Garcia-Sanchez, L; Loffredo, N; Mounier, S; Martin-Garin, A; Coppin, F

    2014-12-01

    This study (i) quantified the kinetics of selenate sorption and (ii) measured the influence of biotic processes in soil selenate stabilisation. Stirred flow-through reactor experiments were conducted on samples of a silty clay soil (pH = 8, Eh = 240-300 mV) from Bure (France) in both non-sterile and sterile conditions. Parameters of the proposed two-site sorption model (EK), adapted from van Genuchten and Wagenet (1989), were estimated by nonlinear regression. Fast selenate sorption on type-1 sites was moderate, with an equilibrium constant of 25.5 and 39.1 L/kg for non-sterile and sterile conditions. Rate-limited sorption on type-2 sites increased with time, and was predominant for longer periods of time in non-sterile conditions. At equilibrium, it would represent over 96% of the sorbed inventory, with mean sorption times of 17 h and 191 h for non-sterile and sterile conditions. Our results showed for Bure soil that (i) selenate sorption in flowing and mildly-oxidising conditions was strongly kinetically controlled, especially in non-sterile conditions, (ii) selenate desorption was much slower than sorption, which suggests its pseudo-irreversible stabilisation, and (iii) microbial activity increased the contribution of rate-limited sorption on type-2 sites, for which it increased sorption rate by a factor 7 but also facilitated its reversibility. This work stresses the limits of the Kd approach to represent selenate sorption in flowing conditions and supports an alternative formulation like the EK model, but also points out that biotic conditions are significant sources of variability for sorption parameters.

  16. Reducing the risk of foaming and decreasing viscosity by two-stage anaerobic digestion of sugar beet pressed pulp.

    Science.gov (United States)

    Stoyanova, Elitza; Forsthuber, Boris; Pohn, Stefan; Schwarz, Christian; Fuchs, Werner; Bochmann, Günther

    2014-04-01

    Anaerobic digestion (AD) of sugar beet pressed pulp (SBPP) is a promising treatment concept. It produces biogas as a renewable energy source making sugar production more energy efficient and it turns SBPP from a residue into a valuable resource. In this study one- and two-stage mono fermentation at mesophilic conditions in a continuous stirred tank reactor were compared. Also the optimal incubation temperature for the pre-acidification stage was studied. The fastest pre-acidification, with a hydraulic retention time (HRT) of 4 days, occurred at a temperature of 55 °C. In the methanogenic reactor of the two-stage system stable fermentation at loading rate of 7 kg VS/m³ d was demonstrated. No artificial pH adjustment was necessary to maintain optimum levels in both the pre-acidification and the methanogenic reactor. The total HRT of the two-stage AD was 36 days which is considerably lower compared to the one-stage AD (50 days). The frequently observed problem of foaming at high loading rates was less severe in the two-stage reactor. Moreover the viscosity of digestate in the methanogenic stage of the two-stage fermentation was in average tenfold lower than in the one-stage fermentation. This decreases the energy input for the reactor stirring about 80 %. The observed advantages make the two-stage process economically attractive, despite higher investments for a two reactor system.

  17. Two stage enucleation and deflation of a large unicystic ameloblastoma with mural invasion in mandible.

    Science.gov (United States)

    Sasaki, Ryo; Watanabe, Yorikatsu; Ando, Tomohiro; Akizuki, Tanetaka

    2014-06-01

    A treatment for strategy of unicystic ameloblastoma (UA) should be decided by its pathology type including luminal or mural type. Luminal type of UA can be treated only by enucleation alone, but UA with mural invasion should be treated aggressively like conventional ameloblastomas. However, it is difficult to diagnose the subtype of UA by an initial biopsy. There is a possibility that the lesion is an ordinary cyst or keratocystic odontogenic tumor, leading to a possible overtreatment. Therefore, this study performed the enucleation of the cyst wall and deflation at first, and the pathological finding confirmed mural invasion into the cystic wall, leading to the second surgery. The second surgery enucleated scar tissue, bone curettage, and deflation, and was able to contribute to the reduction of the recurrence rate by removing tumor nest in scar tissue or new bone, enhancing new bone formation, and shrinking the mandibular expanding by fenestration. In this study, a large UA with mural invasion including condyle was treated by "two-stage enucleation and deflation" in a 20-year-old patient.

  18. Contextual Classification of Point Clouds Using a Two-Stage Crf

    Science.gov (United States)

    Niemeyer, J.; Rottensteiner, F.; Soergel, U.; Heipke, C.

    2015-03-01

    In this investigation, we address the task of airborne LiDAR point cloud labelling for urban areas by presenting a contextual classification methodology based on a Conditional Random Field (CRF). A two-stage CRF is set up: in a first step, a point-based CRF is applied. The resulting labellings are then used to generate a segmentation of the classified points using a Conditional Euclidean Clustering algorithm. This algorithm combines neighbouring points with the same object label into one segment. The second step comprises the classification of these segments, again with a CRF. As the number of the segments is much smaller than the number of points, it is computationally feasible to integrate long range interactions into this framework. Additionally, two different types of interactions are introduced: one for the local neighbourhood and another one operating on a coarser scale. This paper presents the entire processing chain. We show preliminary results achieved using the Vaihingen LiDAR dataset from the ISPRS Benchmark on Urban Classification and 3D Reconstruction, which consists of three test areas characterised by different and challenging conditions. The utilised classification features are described, and the advantages and remaining problems of our approach are discussed. We also compare our results to those generated by a point-based classification and show that a slight improvement is obtained with this first implementation.

  19. CO removal by two-stage methanation for polymer electrolyte fuel cell

    Institute of Scientific and Technical Information of China (English)

    Zhiyuan Li; Wanliang Mi; Juan Gong; Zhenlong Lu; Lihao Xu; Qingquan Su

    2008-01-01

    In order to remove CO to achieve lower CO content of below 10 ppm in the CO removal step of reformer for polymer electrolyte fuel cell (PEFC) co-generation systems, CO preferential methanation under various conditions were studied in this paper. Results showed that, with a single kind of catalyst, it was difficult to reach both CO removal depth and CO2 conversion ratio of below 5%. Thus, a two-stage methanation process applying two kinds of catalysts is proposed in this study, that is, one kind of catalyst with relatively low activity and high selectivity for the first stage at higher temperature, and another kind of catalyst with relatively high activity and high selectivity for the second stage at lower temperature. Experimental results showed that at the first stage CO content was decreased from 1% to below 0.1% at 250-300 ℃, and at the second stage to below 10 ppm at 150-185 ℃. CO2 conversion was kept less than 5%. At the same time, influence of inlet CO content and GHSV on CO removal depth was also discussed in this paper.

  20. A CURRENT MIRROR BASED TWO STAGE CMOS CASCODE OP-AMP FOR HIGH FREQUENCY APPLICATION

    Directory of Open Access Journals (Sweden)

    RAMKRISHNA KUNDU

    2017-03-01

    Full Text Available This paper presents a low power, high slew rate, high gain, ultra wide band two stage CMOS cascode operational amplifier for radio frequency application. Current mirror based cascoding technique and pole zero cancelation technique is used to ameliorate the gain and enhance the unity gain bandwidth respectively, which is the novelty of the circuit. In cascading technique a common source transistor drive a common gate transistor. The cascoding is used to enhance the output resistance and hence improve the overall gain of the operational amplifier with less complexity and less power dissipation. To bias the common gate transistor, a current mirror is used in this paper. The proposed circuit is designed and simulated using Cadence analog and digital system design tools of 45 nanometer CMOS technology. The simulated results of the circuit show DC gain of 63.62 dB, unity gain bandwidth of 2.70 GHz, slew rate of 1816 V/µs, phase margin of 59.53º, power supply of the proposed operational amplifier is 1.4 V (rail-to-rail ±700 mV, and power consumption is 0.71 mW. This circuit specification has encountered the requirements of radio frequency application.