WorldWideScience

Sample records for two-stage convex chance

  1. Chance-Constrained Guidance With Non-Convex Constraints

    Science.gov (United States)

    Ono, Masahiro

    2011-01-01

    Missions to small bodies, such as comets or asteroids, require autonomous guidance for descent to these small bodies. Such guidance is made challenging by uncertainty in the position and velocity of the spacecraft, as well as the uncertainty in the gravitational field around the small body. In addition, the requirement to avoid collision with the asteroid represents a non-convex constraint that means finding the optimal guidance trajectory, in general, is intractable. In this innovation, a new approach is proposed for chance-constrained optimal guidance with non-convex constraints. Chance-constrained guidance takes into account uncertainty so that the probability of collision is below a specified threshold. In this approach, a new bounding method has been developed to obtain a set of decomposed chance constraints that is a sufficient condition of the original chance constraint. The decomposition of the chance constraint enables its efficient evaluation, as well as the application of the branch and bound method. Branch and bound enables non-convex problems to be solved efficiently to global optimality. Considering the problem of finite-horizon robust optimal control of dynamic systems under Gaussian-distributed stochastic uncertainty, with state and control constraints, a discrete-time, continuous-state linear dynamics model is assumed. Gaussian-distributed stochastic uncertainty is a more natural model for exogenous disturbances such as wind gusts and turbulence than the previously studied set-bounded models. However, with stochastic uncertainty, it is often impossible to guarantee that state constraints are satisfied, because there is typically a non-zero probability of having a disturbance that is large enough to push the state out of the feasible region. An effective framework to address robustness with stochastic uncertainty is optimization with chance constraints. These require that the probability of violating the state constraints (i.e., the probability of

  2. A simple randomised algorithm for convex optimisation - Application to two-stage stochastic programming.

    NARCIS (Netherlands)

    M. Dyer; R. Kannan; L. Stougie (Leen)

    2014-01-01

    htmlabstractWe consider maximising a concave function over a convex set by a simplerandomised algorithm. The strength of the algorithm is that it requires only approximatefunction evaluations for the concave function and a weak membership oraclefor the convex set. Under smoothness conditions on the

  3. Randomized Solutions to Convex Programs with Multiple Chance Constraints

    CERN Document Server

    Schildbach, Georg; Morari, Manfred

    2012-01-01

    Optimization is ubiquitous in modern problems of engineering and science, and in many cases it comes along with some uncertainty about the system or model underlying the problem at hand. A large variety of approaches for handling uncertainty have been proposed in the areas of robust and stochastic optimization, of which the formulation of chance-constraints has proven to be an appropriate concept for many practical applications. Yet chance-constrained optimization programs are generally difficult to solve. The scenario approach provides an intuitive way of approximating the solution to chance-constrained optimization programs, based on finding an optimal solution under a finite number of sampled outcomes of the uncertainty (`scenarios'). A key merit of this approach is that it neither requires knowledge of an uncertainty set, as it is common in robust optimization, nor of a probability distribution, as it is usually assumed in stochastic optimization. Recent research has obtained a strong theoretical foundati...

  4. Drop-out between the two liver resections of two-stage hepatectomy. Patient selection or loss of chance?

    Science.gov (United States)

    Viganò, L; Torzilli, G; Cimino, M; Imai, K; Vibert, E; Donadon, M; Castaing, D; Adam, R

    2016-09-01

    Two-stage hepatectomy (TSH) is the present standard for multiple bilobar colorectal liver metastases (CLM), but 25-35% of patients fail to complete the scheduled procedure (drop-out). To elucidate if drop-out of TSH is a patient selection (as usually considered) or a loss of chance. All the consecutive patients scheduled for a TSH at the Paul Brousse Hospital between 2000 and 2012 were considered. TSH patients were matched 1:1 with patients receiving a one-stage ultrasound-guided hepatectomy (OSH) at the Humanitas Research Hospital in the same period. Matching criteria were: primary tumor N status; timing of CLM diagnosis; CLM number and distribution into the liver. Sixty-three pairs of patients were analyzed. Demographic and tumor characteristics were similar (median 7 CLM), except for more chemotherapy lines and adjuvant chemotherapy in TSH. Drop-out rate of TSH was 38.1% (0% of OSH). The two groups had similar R0 resection rate (19.0% OSH vs. 15.9% TSH). OSH and completed TSH had similar five-year survival (from CLM diagnosis 49.8% vs. 49.7%, from liver resection 36.1% vs. 44.3%), superior to drop-out (10% three-year survival, p drop-out vs. OSH/completed TSH) was the only independent prognostic factor (p = 0.003). Drop-out of TSH could be a loss of chance rather than a criteria for patient selection. "Unselected" OSH patients had the same outcomes of selected patients who completed TSH. A complete resection is the main determinant of prognosis. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Convexity Adjustments

    DEFF Research Database (Denmark)

    M. Gaspar, Raquel; Murgoci, Agatha

    2010-01-01

    of particular importance to practitioners: yield convexity adjustments, forward versus futures convexity adjustments, timing and quanto convexity adjustments. We claim that the appropriate way to look into any of these adjustments is as a side effect of a measure change, as proposed by Pelsser (2003...

  6. Undergraduate Convexity

    DEFF Research Database (Denmark)

    Lauritzen, Niels

    -Motzkin elimination, the theory is developed by introducing polyhedra, the double description method and the simplex algorithm, closed convex subsets, convex functions of one and several variables ending with a chapter on convex optimization with the Karush-Kuhn-Tucker conditions, duality and an interior point...

  7. Cubes convexes

    CERN Document Server

    Nedjar, Sebastien; Cicchetti, Rosine; Lakhal, Lotfi; 10.3166/isi.11.6.11-31

    2010-01-01

    In various approaches, data cubes are pre-computed in order to answer efficiently OLAP queries. The notion of data cube has been declined in various ways: iceberg cubes, range cubes or differential cubes. In this paper, we introduce the concept of convex cube which captures all the tuples of a datacube satisfying a constraint combination. It can be represented in a very compact way in order to optimize both computation time and required storage space. The convex cube is not an additional structure appended to the list of cube variants but we propose it as a unifying structure that we use to characterize, in a simple, sound and homogeneous way, the other quoted types of cubes. Finally, we introduce the concept of emerging cube which captures the significant trend inversions. characterizations.

  8. Convex polytopes

    CERN Document Server

    Klee, Victor; Ziegler, Günter

    2003-01-01

    "The appearance of Grünbaum's book Convex Polytopes in 1967 was a moment of grace to geometers and combinatorialists. The special spirit of the book is very much alive even in those chapters where the book's immense influence made them quickly obsolete. Some other chapters promise beautiful unexplored land for future research. The appearance of the new edition is going to be another moment of grace. Kaibel, Klee and Ziegler were able to update the convex polytope saga in a clear, accurate, lively, and inspired way." (Gil Kalai, The Hebrew University of Jerusalem) "The original book of Grünbaum has provided the central reference for work in this active area of mathematics for the past 35 years...I first consulted this book as a graduate student in 1967; yet, even today, I am surprised again and again by what I find there. It is an amazingly complete reference for work on this subject up to that time and continues to be a major influence on research to this day." (Louis J. Billera, Cornell University) "The or...

  9. Distributionally Robust Joint Chance Constrained Problem under Moment Uncertainty

    Directory of Open Access Journals (Sweden)

    Ke-wei Ding

    2014-01-01

    Full Text Available We discuss and develop the convex approximation for robust joint chance constraints under uncertainty of first- and second-order moments. Robust chance constraints are approximated by Worst-Case CVaR constraints which can be reformulated by a semidefinite programming. Then the chance constrained problem can be presented as semidefinite programming. We also find that the approximation for robust joint chance constraints has an equivalent individual quadratic approximation form.

  10. The construction of two-stage tests

    NARCIS (Netherlands)

    Adema, Jos J.

    1988-01-01

    Although two-stage testing is not the most efficient form of adaptive testing, it has some advantages. In this paper, linear programming models are given for the construction of two-stage tests. In these models, practical constraints with respect to, among other things, test composition, administrat

  11. On Convex Quadratic Approximation

    NARCIS (Netherlands)

    den Hertog, D.; de Klerk, E.; Roos, J.

    2000-01-01

    In this paper we prove the counterintuitive result that the quadratic least squares approximation of a multivariate convex function in a finite set of points is not necessarily convex, even though it is convex for a univariate convex function. This result has many consequences both for the field of

  12. On Convex Quadratic Approximation

    NARCIS (Netherlands)

    den Hertog, D.; de Klerk, E.; Roos, J.

    2000-01-01

    In this paper we prove the counterintuitive result that the quadratic least squares approximation of a multivariate convex function in a finite set of points is not necessarily convex, even though it is convex for a univariate convex function. This result has many consequences both for the field of

  13. Uniformly convex and strictly convex Orlicz spaces

    Science.gov (United States)

    Masta, Al Azhary

    2016-02-01

    In this paper we define the new norm of Orlicz spaces on ℝn through a multiplication operator on an old Orlicz spaces. We obtain some necessary and sufficient conditions that the new norm to be a uniformly convex and strictly convex spaces.

  14. Two-stage sampling for acceptance testing

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, C.L.; Bryan, M.F.

    1992-09-01

    Sometimes a regulatory requirement or a quality-assurance procedure sets an allowed maximum on a confidence limit for a mean. If the sample mean of the measurements is below the allowed maximum, but the confidence limit is above it, a very widespread practice is to increase the sample size and recalculate the confidence bound. The confidence level of this two-stage procedure is rarely found correctly, but instead is typically taken to be the nominal confidence level, found as if the final sample size had been specified in advance. In typical settings, the correct nominal [alpha] should be between the desired P(Type I error) and half that value. This note gives tables for the correct a to use, some plots of power curves, and an example of correct two-stage sampling.

  15. Two-stage sampling for acceptance testing

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, C.L.; Bryan, M.F.

    1992-09-01

    Sometimes a regulatory requirement or a quality-assurance procedure sets an allowed maximum on a confidence limit for a mean. If the sample mean of the measurements is below the allowed maximum, but the confidence limit is above it, a very widespread practice is to increase the sample size and recalculate the confidence bound. The confidence level of this two-stage procedure is rarely found correctly, but instead is typically taken to be the nominal confidence level, found as if the final sample size had been specified in advance. In typical settings, the correct nominal {alpha} should be between the desired P(Type I error) and half that value. This note gives tables for the correct a to use, some plots of power curves, and an example of correct two-stage sampling.

  16. Two Stage Gear Tooth Dynamics Program

    Science.gov (United States)

    1989-08-01

    cordi - tions and associated iteration prooedure become more complex. This is due to both the increased number of components and to the time for a...solved for each stage in the two stage solution . There are (3 + ntrrber of planets) degrees of freedom fcr eacb stage plus two degrees of freedom...should be devised. It should be noted that this is not minor task. In general, each stage plus an input or output shaft will have 2 times (4 + number

  17. Condensate from a two-stage gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Henriksen, Ulrik Birk; Hindsgaul, Claus

    2000-01-01

    that the organic compounds and the inhibition effect are very low even before treatment with activated carbon. The moderate inhibition effect relates to a high content of ammonia in the condensate. The nitrifiers become tolerant to the condensate after a few weeks of exposure. The level of organic compounds......Condensate, produced when gas from downdraft biomass gasifier is cooled, contains organic compounds that inhibit nitrifiers. Treatment with activated carbon removes most of the organics and makes the condensate far less inhibitory. The condensate from an optimised two-stage gasifier is so clean...

  18. Two Stage Sibling Cycle Compressor/Expander.

    Science.gov (United States)

    1994-02-01

    vol. 5, p. 424. 11. L. Bauwens and M.P. Mitchell, " Regenerator Analysis: Validation of the MS*2 Stirling Cycle Code," Proc. XVIIIth International...PL-TR--94-1051 PL-TR-- 94-1051 TWO STAGE SIBLING CYCLE COMPRESSOR/EXPANDER Matthew P. Mitchell . Mitchell/ Stirling Machines/Systems, Inc. No\\ 1995...ty. THIS PAGE IS UNCLASSIFIED PL-TR-94-1051 This final report was prepared byMitchell/ Stirling Machines/Systems, Inc., Berkeley, CA under Contract

  19. Bornological Locally Convex Cones

    Directory of Open Access Journals (Sweden)

    Davood Ayaseh

    2014-10-01

    Full Text Available In this paper we define bornological and b-bornological cones and investigate their properties. We give some characterization for these cones. In the special case of locally convex topological vector space both these concepts reduce to the known concept  of bornological spaces. We introduce and investigate the  convex quasiuniform   structures U_{tau}, U_{sigma}(P,P* and \\U_{beta}(P,P* on locally convex cone (P,U.

  20. Classification in two-stage screening.

    Science.gov (United States)

    Longford, Nicholas T

    2015-11-10

    Decision theory is applied to the problem of setting thresholds in medical screening when it is organised in two stages. In the first stage that involves a less expensive procedure that can be applied on a mass scale, an individual is classified as a negative or a likely positive. In the second stage, the likely positives are subjected to another test that classifies them as (definite) positives or negatives. The second-stage test is more accurate, but also more expensive and more involved, and so there are incentives to restrict its application. Robustness of the method with respect to the parameters, some of which have to be set by elicitation, is assessed by sensitivity analysis.

  1. Two stage gear tooth dynamics program

    Science.gov (United States)

    Boyd, Linda S.

    1989-01-01

    The epicyclic gear dynamics program was expanded to add the option of evaluating the tooth pair dynamics for two epicyclic gear stages with peripheral components. This was a practical extension to the program as multiple gear stages are often used for speed reduction, space, weight, and/or auxiliary units. The option was developed for either stage to be a basic planetary, star, single external-external mesh, or single external-internal mesh. The two stage system allows for modeling of the peripherals with an input mass and shaft, an output mass and shaft, and a connecting shaft. Execution of the initial test case indicated an instability in the solution with the tooth paid loads growing to excessive magnitudes. A procedure to trace the instability is recommended as well as a method of reducing the program's computation time by reducing the number of boundary condition iterations.

  2. Uniformly Convex Metric Spaces

    OpenAIRE

    Kell Martin

    2014-01-01

    In this paper the theory of uniformly convex metric spaces is developed. These spaces exhibit a generalized convexity of the metric from a fixed point. Using a (nearly) uniform convexity property a simple proof of reflexivity is presented and a weak topology of such spaces is analyzed. This topology called co-convex topology agrees with the usualy weak topology in Banach spaces. An example of a $CAT(0)$-spaces with weak topology which is not Hausdorff is given. This answers questions raised b...

  3. Theory of convex structures

    CERN Document Server

    van de Vel, MLJ

    1993-01-01

    Presented in this monograph is the current state-of-the-art in the theory of convex structures. The notion of convexity covered here is considerably broader than the classic one; specifically, it is not restricted to the context of vector spaces. Classical concepts of order-convex sets (Birkhoff) and of geodesically convex sets (Menger) are directly inspired by intuition; they go back to the first half of this century. An axiomatic approach started to develop in the early Fifties. The author became attracted to it in the mid-Seventies, resulting in the present volume, in which graphs appear si

  4. Chance and Talent Development

    Science.gov (United States)

    Gagne, Francoys; Schader, Robin M.

    2006-01-01

    The role of chance in talent development appears in the gifted education literature and also in lay discussions of high ability. Nevertheless, chance as a factor in talent development is frequently misunderstood. This analysis scrutinizes some common beliefs and scholarly perspectives on the effects of chance in the development of high ability,…

  5. Life Chances Exercise.

    Science.gov (United States)

    Miller, Margaret A.

    1992-01-01

    Describes a life chances exercise that helps students identify the life chances that they and society value. Explains that students learn that the attainment of important life chances is related to the family into which one is born. Discusses John Rawls' social theory. Suggests that participants may need to consider alternative systems of economic…

  6. Two-Stage Modelling Of Random Phenomena

    Science.gov (United States)

    Barańska, Anna

    2015-12-01

    The main objective of this publication was to present a two-stage algorithm of modelling random phenomena, based on multidimensional function modelling, on the example of modelling the real estate market for the purpose of real estate valuation and estimation of model parameters of foundations vertical displacements. The first stage of the presented algorithm includes a selection of a suitable form of the function model. In the classical algorithms, based on function modelling, prediction of the dependent variable is its value obtained directly from the model. The better the model reflects a relationship between the independent variables and their effect on the dependent variable, the more reliable is the model value. In this paper, an algorithm has been proposed which comprises adjustment of the value obtained from the model with a random correction determined from the residuals of the model for these cases which, in a separate analysis, were considered to be the most similar to the object for which we want to model the dependent variable. The effect of applying the developed quantitative procedures for calculating the corrections and qualitative methods to assess the similarity on the final outcome of the prediction and its accuracy, was examined by statistical methods, mainly using appropriate parametric tests of significance. The idea of the presented algorithm has been designed so as to approximate the value of the dependent variable of the studied phenomenon to its value in reality and, at the same time, to have it "smoothed out" by a well fitted modelling function.

  7. On convexity in complex networks

    CERN Document Server

    Marc, Tilen

    2016-01-01

    Metric graph properties lie in the heart of the analysis of complex networks, while in this paper we study their convexity. We analyze the expansion of convex subsets of nodes in empirical networks and also convexity of small subgraphs known as graphlets. We demonstrate that convexity is an inherent property of complex networks not present in a random graph. According to our perception of convexity, a convex network is such in which every connected subset of nodes induces a convex subgraph. Especially convex are technological networks and social collaboration graphs, whereas food webs are the only networks studied that are truly non-convex. Many other networks can be divided into a non-convex core surrounded by a convex periphery. We interpret convexity in terms of redundancy of shortest paths in a network and discuss possible applications.

  8. Composite likelihood and two-stage estimation in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2002-01-01

    Composite likelihood; Two-stage estimation; Family studies; Copula; Optimal weights; All possible pairs......Composite likelihood; Two-stage estimation; Family studies; Copula; Optimal weights; All possible pairs...

  9. On the robustness of two-stage estimators

    KAUST Repository

    Zhelonkin, Mikhail

    2012-04-01

    The aim of this note is to provide a general framework for the analysis of the robustness properties of a broad class of two-stage models. We derive the influence function, the change-of-variance function, and the asymptotic variance of a general two-stage M-estimator, and provide their interpretations. We illustrate our results in the case of the two-stage maximum likelihood estimator and the two-stage least squares estimator. © 2011.

  10. Dynamic Planar Convex Hull

    DEFF Research Database (Denmark)

    Jacob, Riko

    We determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage of the data structure...... is O(n). The data structure supports extreme point queries in a given direction, tangent queries through a given point, and queries for the neighboring points on the convex hull in O(log n) time. The extreme point queries can be used to decide whether or not a given line intersects the convex hull......, and the tangent queries to determine whether a given point is inside the convex hull. The space usage of the data structure is O(n). We give a lower bound on the amortized asymptotic time complexity that matches the performance of this data structure....

  11. Dynamic Planar Convex Hull

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølfting; Jacob, Rico

    2002-01-01

    In this paper we determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage...... of the data structure is O(n). The data structure supports extreme point queries in a given direction, tangent queries through a given point, and queries for the neighboring points on the convex hull in O(log n) time. The extreme point queries can be used to decide whether or not a given line intersects...... the convex hull, and the tangent queries to determine whether a given point is inside the convex hull. We give a lower bound on the amortized asymptotic time complexity that matches the performance of this data structure....

  12. Selective capsulotomies of the expanded breast as a remodelling method in two-stage breast reconstruction.

    Science.gov (United States)

    Grimaldi, Luca; Campana, Matteo; Brandi, Cesare; Nisi, Giuseppe; Brafa, Anna; Calabrò, Massimiliano; D'Aniello, Carlo

    2013-06-01

    The two-stage breast reconstruction with tissue expander and prosthesis is nowadays a common method for achieving a satisfactory appearance in selected patients who had a mastectomy, but its most common aesthetic drawback is represented by an excessive volumetric increment of the superior half of the reconstructed breast, with a convexity of the profile in that area. A possible solution to limit this effect, and to fulfil the inferior pole, may be obtained by reducing the inferior tissue resistance by means of capsulotomies. This study reports the effects of various types of capsulotomies, performed in 72 patients after removal of the mammary expander, with the aim of emphasising the convexity of the inferior mammary aspect in the expanded breast. According to each kind of desired modification, possible solutions are described. On the basis of subjective and objective evaluations, an overall high degree of satisfaction has been evidenced. The described selective capsulotomies, when properly carried out, may significantly improve the aesthetic results in two-stage reconstructed breasts, with no additional scars, with minimal risks, and with little lengthening of the surgical time.

  13. Chance and Uncertainty

    NARCIS (Netherlands)

    Capel, H.W.; Cramer, J.S.; Estevez-Uscanga, O.

    1995-01-01

    'Uncertainty and chance' is a subject with a broad span, in that there is no academic discipline or walk of life that is not beset by uncertainty and chance. In this book a range of approaches is represented by authors from varied disciplines: natural sciences, mathematics, social sciences and medic

  14. Statistical properties of convex clustering

    OpenAIRE

    Tan, Kean Ming; Witten, Daniela

    2015-01-01

    In this manuscript, we study the statistical properties of convex clustering. We establish that convex clustering is closely related to single linkage hierarchical clustering and $k$-means clustering. In addition, we derive the range of the tuning parameter for convex clustering that yields a non-trivial solution. We also provide an unbiased estimator of the degrees of freedom, and provide a finite sample bound for the prediction error for convex clustering. We compare convex clustering to so...

  15. Notions of convexity

    CERN Document Server

    Hörmander, Lars

    1994-01-01

    The first two chapters of this book are devoted to convexity in the classical sense, for functions of one and several real variables respectively. This gives a background for the study in the following chapters of related notions which occur in the theory of linear partial differential equations and complex analysis such as (pluri-)subharmonic functions, pseudoconvex sets, and sets which are convex for supports or singular supports with respect to a differential operator. In addition, the convexity conditions which are relevant for local or global existence of holomorphic differential equations are discussed, leading up to Trépreau’s theorem on sufficiency of condition (capital Greek letter Psi) for microlocal solvability in the analytic category. At the beginning of the book, no prerequisites are assumed beyond calculus and linear algebra. Later on, basic facts from distribution theory and functional analysis are needed. In a few places, a more extensive background in differential geometry or pseudodiffer...

  16. Convex Geometry and Stoichiometry

    CERN Document Server

    Jer-Chin,

    2011-01-01

    We demonstrate the benefits of a convex geometric perspective for questions on chemical stoichiometry. We show that the balancing of chemical equations, the use of "mixtures" to explain multiple stoichiometry, and the half-reaction for balancing redox actions all yield nice convex geometric interpretations. We also relate some natural questions on reaction mechanisms with the enumeration of lattice points in polytopes. Lastly, it is known that a given reaction mechanism imposes linear constraints on observed stoichiometries. We consider the inverse question of deducing reaction mechanism consistent with a given set of linear stoichiometric restrictions.

  17. SMOOTHING BY CONVEX QUADRATIC PROGRAMMING

    Institute of Scientific and Technical Information of China (English)

    Bing-sheng He; Yu-mei Wang

    2005-01-01

    In this paper, we study the relaxed smoothing problems with general closed convex constraints. It is pointed out that such problems can be converted to a convex quadratic minimization problem for which there are good programs in software libraries.

  18. Global approximation of convex functions

    CERN Document Server

    Azagra, D

    2011-01-01

    We show that for every (not necessarily bounded) open convex subset $U$ of $\\R^n$, every (not necessarily Lipschitz or strongly) convex function $f:U\\to\\R$ can be approximated by real analytic convex functions, uniformly on all of $U$. In doing so we provide a technique which transfers results on uniform approximation on bounded sets to results on uniform approximation on unbounded sets, in such a way that not only convexity and $C^k$ smoothness, but also local Lipschitz constants, minimizers, order, and strict or strong convexity, are preserved. This transfer method is quite general and it can also be used to obtain new results on approximation of convex functions defined on Riemannian manifolds or Banach spaces. We also provide a characterization of the class of convex functions which can be uniformly approximated on $\\R^n$ by strongly convex functions.

  19. Egalitarianism in Convex Fuzzy Games

    NARCIS (Netherlands)

    Brânzei, R.; Dimitrov, D.A.; Tijs, S.H.

    2002-01-01

    In this paper the egalitarian solution for convex cooperative fuzzy games is introduced.The classical Dutta-Ray algorithm for finding the constrained egalitarian solution for convex crisp games is adjusted to provide the egalitarian solution of a convex fuzzy game.This adjusted algorithm is also a f

  20. Average Convexity in Communication Situations

    NARCIS (Netherlands)

    Slikker, M.

    1998-01-01

    In this paper we study inheritance properties of average convexity in communication situations. We show that the underlying graph ensures that the graphrestricted game originating from an average convex game is average convex if and only if every subgraph associated with a component of the underlyin

  1. Efficient Approximation of Convex Recolorings

    OpenAIRE

    Moran, Shlomo; Snir, Sagi

    2005-01-01

    A coloring of a tree is convex if the vertices that pertain to any color induce a connected subtree; a partial coloring (which assigns colors to some of the vertices) is convex if it can be completed to a convex (total) coloring. Convex coloring of trees arise in areas such as phylogenetics, linguistics, etc. eg, a perfect phylogenetic tree is one in which the states of each character induce a convex coloring of the tree. Research on perfect phylogeny is usually focused on finding a tree so t...

  2. Treatment of cadmium dust with two-stage leaching process

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The treatment of cadmium dust with a two-stage leaching process was investigated to replace the existing sulphation roast-leaching processes. The process parameters in the first stage leaching were basically similar to the neutralleaching in zinc hydrometallurgy. The effects of process parameters in the second stage leaching on the extraction of zincand cadmium were mainly studied. The experimental results indicated that zinc and cadmium could be efficiently recoveredfrom the cadmium dust by two-stage leaching process. The extraction percentages of zinc and cadmium in two stage leach-ing reached 95% and 88% respectively under the optimum conditions. The total extraction percentage of Zn and Cdreached 94%.

  3. Convex Graph Invariants

    Science.gov (United States)

    2010-12-02

    evaluating the function ΘP (A) for any fixed A,P is equivalent to solving the so-called Quadratic Assignment Problem ( QAP ), and thus we can employ various...tractable linear programming, spectral, and SDP relaxations of QAP [40, 11, 33]. In particular we discuss recent work [14] on exploiting group...symmetry in SDP relaxations of QAP , which is useful for approximately computing elementary convex graph invariants in many interesting cases. Finally in

  4. Chance in the Everett interpretation

    CERN Document Server

    Saunders, Simon

    2016-01-01

    The notion of objective probability or chance, as a physical trait of the world, has proved elusive; the identification of chances with actual frequencies does not succeed. An adequate theory of chance should explain not only the connection of chance with statistics, but with degrees of belief, and more broadly the entire phenomenology of (seemingly) chance events and their measurement. Branching structure in the decoherence-based many worlds theory provides an account of what chance is that satisfies all these desiderata, including the requirement that chance involves uncertainty.

  5. LOGISTICS SCHEDULING: ANALYSIS OF TWO-STAGE PROBLEMS

    Institute of Scientific and Technical Information of China (English)

    Yung-Chia CHANG; Chung-Yee LEE

    2003-01-01

    This paper studies the coordination effects between stages for scheduling problems where decision-making is a two-stage process. Two stages are considered as one system. The system can be a supply chain that links two stages, one stage representing a manufacturer; and the other, a distributor.It also can represent a single manufacturer, while each stage represents a different department responsible for a part of operations. A problem that jointly considers both stages in order to achieve ideal overall system performance is defined as a system problem. In practice, at times, it might not be feasible for the two stages to make coordinated decisions due to (i) the lack of channels that allow decision makers at the two stages to cooperate, and/or (ii) the optimal solution to the system problem is too difficult (or costly) to achieve.Two practical approaches are applied to solve a variant of two-stage logistic scheduling problems. The Forward Approach is defined as a solution procedure by which the first stage of the system problem is solved first, followed by the second stage. Similarly, the Backward Approach is defined as a solution procedure by which the second stage of the system problem is solved prior to solving the first stage. In each approach, two stages are solved sequentially and the solution generated is treated as a heuristic solution with respect to the corresponding system problem. When decision makers at two stages make decisions locally without considering consequences to the entire system,ineffectiveness may result - even when each stage optimally solves its own problem. The trade-off between the time complexity and the solution quality is the main concern. This paper provides the worst-case performance analysis for each approach.

  6. Residential Two-Stage Gas Furnaces - Do They Save Energy?

    Energy Technology Data Exchange (ETDEWEB)

    Lekov, Alex; Franco, Victor; Lutz, James

    2006-05-12

    Residential two-stage gas furnaces account for almost a quarter of the total number of models listed in the March 2005 GAMA directory of equipment certified for sale in the United States. Two-stage furnaces are expanding their presence in the market mostly because they meet consumer expectations for improved comfort. Currently, the U.S. Department of Energy (DOE) test procedure serves as the method for reporting furnace total fuel and electricity consumption under laboratory conditions. In 2006, American Society of Heating Refrigeration and Air-conditioning Engineers (ASHRAE) proposed an update to its test procedure which corrects some of the discrepancies found in the DOE test procedure and provides an improved methodology for calculating the energy consumption of two-stage furnaces. The objectives of this paper are to explore the differences in the methods for calculating two-stage residential gas furnace energy consumption in the DOE test procedure and in the 2006 ASHRAE test procedure and to compare test results to research results from field tests. Overall, the DOE test procedure shows a reduction in the total site energy consumption of about 3 percent for two-stage compared to single-stage furnaces at the same efficiency level. In contrast, the 2006 ASHRAE test procedure shows almost no difference in the total site energy consumption. The 2006 ASHRAE test procedure appears to provide a better methodology for calculating the energy consumption of two-stage furnaces. The results indicate that, although two-stage technology by itself does not save site energy, the combination of two-stage furnaces with BPM motors provides electricity savings, which are confirmed by field studies.

  7. Two-stage local M-estimation of additive models

    Institute of Scientific and Technical Information of China (English)

    JIANG JianCheng; LI JianTao

    2008-01-01

    This paper studies local M-estimation of the nonparametric components of additive models. A two-stage local M-estimation procedure is proposed for estimating the additive components and their derivatives. Under very mild conditions, the proposed estimators of each additive component and its derivative are jointly asymptotically normal and share the same asymptotic distributions as they would be if the other components were known. The established asymptotic results also hold for two particular local M-estimations: the local least squares and least absolute deviation estimations. However,for general two-stage local M-estimation with continuous and nonlinear ψ-functions, its implementation is time-consuming. To reduce the computational burden, one-step approximations to the two-stage local M-estimators are developed. The one-step estimators are shown to achieve the same efficiency as the fully iterative two-stage local M-estimators, which makes the two-stage local M-estimation more feasible in practice. The proposed estimators inherit the advantages and at the same time overcome the disadvantages of the local least-squares based smoothers. In addition, the practical implementation of the proposed estimation is considered in details. Simulations demonstrate the merits of the two-stage local M-estimation, and a real example illustrates the performance of the methodology.

  8. Two-stage local M-estimation of additive models

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper studies local M-estimation of the nonparametric components of additive models.A two-stage local M-estimation procedure is proposed for estimating the additive components and their derivatives.Under very mild conditions,the proposed estimators of each additive component and its derivative are jointly asymptotically normal and share the same asymptotic distributions as they would be if the other components were known.The established asymptotic results also hold for two particular local M-estimations:the local least squares and least absolute deviation estimations.However,for general two-stage local M-estimation with continuous and nonlinear ψ-functions,its implementation is time-consuming.To reduce the computational burden,one-step approximations to the two-stage local M-estimators are developed.The one-step estimators are shown to achieve the same effciency as the fully iterative two-stage local M-estimators,which makes the two-stage local M-estimation more feasible in practice.The proposed estimators inherit the advantages and at the same time overcome the disadvantages of the local least-squares based smoothers.In addition,the practical implementation of the proposed estimation is considered in details.Simulations demonstrate the merits of the two-stage local M-estimation,and a real example illustrates the performance of the methodology.

  9. An asset and liability management (ALM) model using integrated chance constraints

    Science.gov (United States)

    Hussin, Siti Aida Sheikh; Mitra, Gautam; Roman, Diana

    2014-12-01

    This paper discusses and develops a Two Stage Integrated Chance Constraints Programming for the Employees Provident Fund Malaysia. The main aim is to manage, that is, balance assets and liabilities. Integrated Chance Constraints not only limit the event of underfunding but also the amount of underfunding. This paper includes the numerical illustration.

  10. Negotiating Life Chances

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    Young people in rural eastern Nepal have experienced a recent civil war (1996-2006) and are still living in a situation of continuous political instability, regional ethnic activism, slow development and remoteness. Nevertheless, they are also the first generation for whom the majority can aspire...... to and negotiate both educational and labour mobility - both of which are associated with the chance of a better life. This thesis is about young people (aged 16-31): How they negotiate their life chances and how they contribute to transformations of the socio-political space of their communities in two villages...... of Nepal's Panchthar District. The research sheds light on rural and non-activist young men and women, in contrast to prevailing studies of the urban young, or the young as either revolutionary or as combatants. The findings show that mobility has come to be seen as a way of reaching an appropriate social...

  11. Taking a Chance

    DEFF Research Database (Denmark)

    Heinskou, Marie Bruvik; Demant, Jakob

    2011-01-01

    This article analyzes the meaning of alcohol in relation to young people’s sexuality, with focus on acquaintance rape. Drinking is a way to stage oneself as mature; it is intentionally used by both male and female youth to make sexual pleasure possible. It is argued that in the context of sexuality...... among young people, there is a fine line between freedom and gender-specific restrictions. The research on acquaintance rape and alcohol drinking among the youth is traditionally dominated by the concept of risk. This article introduces the concept of chance, along with risk, to grasp the complexities...... of the grey zone situations of acquaintance rape among the youth. The risk of social stigma within the gender game increases with drinking alcohol simultaneously as the chances of expanding the limitations of gender roles also increase with drinking. These social stigmas, embedded in the gender roles...

  12. Negotiating Life Chances

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    becoming. Aspirations prevail over political interests: young people navigate and negotiate their engagement in party and community politics by making calculations concerning their own mobility, life strategies and obligations to kin. In this way, young men engage in, but also balance and shift...... to and negotiate both educational and labour mobility - both of which are associated with the chance of a better life. This thesis is about young people (aged 16-31): How they negotiate their life chances and how they contribute to transformations of the socio-political space of their communities in two villages...... and their staying. Even though working abroad in particular has become an important way of rationalizing a respectable social status for young men, many have deliberately positioned themselves as stayers and returnees, rationalizing this choice through the need to develop their own community and Nepal itself. Women...

  13. Taking a Chance

    DEFF Research Database (Denmark)

    Heinskou, Marie Bruvik; Demant, Jakob

    2011-01-01

    This article analyzes the meaning of alcohol in relation to young people’s sexuality, with focus on acquaintance rape. Drinking is a way to stage oneself as mature; it is intentionally used by both male and female youth to make sexual pleasure possible. It is argued that in the context of sexuality...... among young people, there is a fine line between freedom and gender-specific restrictions. The research on acquaintance rape and alcohol drinking among the youth is traditionally dominated by the concept of risk. This article introduces the concept of chance, along with risk, to grasp the complexities...... of the grey zone situations of acquaintance rape among the youth. The risk of social stigma within the gender game increases with drinking alcohol simultaneously as the chances of expanding the limitations of gender roles also increase with drinking. These social stigmas, embedded in the gender roles...

  14. Introducing the Adaptive Convex Enveloping

    CERN Document Server

    Yu, Sheng

    2011-01-01

    Convexity, though extremely important in mathematical programming, has not drawn enough attention in the field of dynamic programming. This paper gives conditions for verifying convexity of the cost-to-go functions, and introduces an accurate, fast and reliable algorithm for solving convex dynamic programs with multivariate continuous states and actions, called Adaptive Convex Enveloping. This is a short introduction of the core technique created and used in my dissertation, so it is less formal, and misses some parts, such as literature review and reference, compared to a full journal paper.

  15. Convex polytopes and quantum states

    Energy Technology Data Exchange (ETDEWEB)

    Wilmott, Colin; Kampermann, Hermann; Bruss, Dagmar [Institut fuer Theoretische Physik III, Heinrich-Heine-Universitaet Duesseldorf (Germany)

    2010-07-01

    A convex polytope is defined as the convex hull of a finite non-empty set of vectors. We present a theorem of Rado (1952) which characterizes the convex hull of the collection of all permutations of a given real d-tuple in terms of the Hardy-Littlewood-Polya spectral order relation prec. We give a necessary and sufficient condition to construct a d-dimensional convex polytope which utilizes Rado's original (d-1)-dimensional characterization, and we describe how the resulting polytope may be placed in a quantum mechanical framework.

  16. STARS A Two Stage High Gain Harmonic Generation FEL Demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    M. Abo-Bakr; W. Anders; J. Bahrdt; P. Budz; K.B. Buerkmann-Gehrlein; O. Dressler; H.A. Duerr; V. Duerr; W. Eberhardt; S. Eisebitt; J. Feikes; R. Follath; A. Gaupp; R. Goergen; K. Goldammer; S.C. Hessler; K. Holldack; E. Jaeschke; Thorsten Kamps; S. Klauke; J. Knobloch; O. Kugeler; B.C. Kuske; P. Kuske; A. Meseck; R. Mitzner; R. Mueller; M. Neeb; A. Neumann; K. Ott; D. Pfluckhahn; T. Quast; M. Scheer; Th. Schroeter; M. Schuster; F. Senf; G. Wuestefeld; D. Kramer; Frank Marhauser

    2007-08-01

    BESSY is proposing a demonstration facility, called STARS, for a two-stage high-gain harmonic generation free electron laser (HGHG FEL). STARS is planned for lasing in the wavelength range 40 to 70 nm, requiring a beam energy of 325 MeV. The facility consists of a normal conducting gun, three superconducting TESLA-type acceleration modules modified for CW operation, a single stage bunch compressor and finally a two-stage HGHG cascaded FEL. This paper describes the faciliy layout and the rationale behind the operation parameters.

  17. Dynamic Modelling of the Two-stage Gasification Process

    DEFF Research Database (Denmark)

    Gøbel, Benny; Henriksen, Ulrik B.; Houbak, Niels

    1999-01-01

    A two-stage gasification pilot plant was designed and built as a co-operative project between the Technical University of Denmark and the company REKA.A dynamic, mathematical model of the two-stage pilot plant was developed to serve as a tool for optimising the process and the operating conditions...... of the gasification plant.The model consists of modules corresponding to the different elements in the plant. The modules are coupled together through mass and heat conservation.Results from the model are compared with experimental data obtained during steady and unsteady operation of the pilot plant. A good...

  18. Time, Chance, and Reduction

    Science.gov (United States)

    Ernst, Gerhard; Hüttemann, Andreas

    2010-01-01

    List of contributors; 1. Introduction Gerhard Ernst and Andreas Hütteman; Part I. The Arrows of Time: 2. Does a low-entropy constraint prevent us from influencing the past? Mathias Frisch; 3. The part hypothesis meets gravity Craig Callender; 4. Quantum gravity and the arrow of time Claus Kiefer; Part II. Probability and Chance: 5. The natural-range conception of probability Jacob Rosenthal; 6. Probability in Boltzmannian statistical mechanics Roman Frigg; 7. Humean mechanics versus a metaphysics of powers Michael Esfeld; Part III. Reduction: 8. The crystallisation of Clausius's phenomenological thermodynamics C. Ulises Moulines; 9. Reduction and renormalization Robert W. Batterman; 10. Irreversibility in stochastic dynamics Jos Uffink; Index.

  19. Convex Games versus Clan Games

    NARCIS (Netherlands)

    Brânzei, R.; Dimitrov, D.A.; Tijs, S.H.

    2006-01-01

    In this paper we provide characterizations of convex games and total clan games by using properties of their corresponding marginal games.We show that a "dualize and restrict" procedure transforms total clan games with zero worth for the clan into monotonic convex games.Furthermore, each monotonic

  20. Two-Stage Fuzzy Portfolio Selection Problem with Transaction Costs

    Directory of Open Access Journals (Sweden)

    Yanju Chen

    2015-01-01

    Full Text Available This paper studies a two-period portfolio selection problem. The problem is formulated as a two-stage fuzzy portfolio selection model with transaction costs, in which the future returns of risky security are characterized by possibility distributions. The objective of the proposed model is to achieve the maximum utility in terms of the expected value and variance of the final wealth. Given the first-stage decision vector and a realization of fuzzy return, the optimal value expression of the second-stage programming problem is derived. As a result, the proposed two-stage model is equivalent to a single-stage model, and the analytical optimal solution of the two-stage model is obtained, which helps us to discuss the properties of the optimal solution. Finally, some numerical experiments are performed to demonstrate the new modeling idea and the effectiveness. The computational results provided by the proposed model show that the more risk-averse investor will invest more wealth in the risk-free security. They also show that the optimal invested amount in risky security increases as the risk-free return decreases and the optimal utility increases as the risk-free return increases, whereas the optimal utility increases as the transaction costs decrease. In most instances the utilities provided by the proposed two-stage model are larger than those provided by the single-stage model.

  1. Efficient Two-Stage Group Testing Algorithms for DNA Screening

    CERN Document Server

    Huber, Michael

    2011-01-01

    Group testing algorithms are very useful tools for DNA library screening. Building on recent work by Levenshtein (2003) and Tonchev (2008), we construct in this paper new infinite classes of combinatorial structures, the existence of which are essential for attaining the minimum number of individual tests at the second stage of a two-stage disjunctive testing algorithm.

  2. High Performance Gasification with the Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Gøbel, Benny; Hindsgaul, Claus; Henriksen, Ulrik Birk

    2002-01-01

    Based on more than 15 years of research and practical experience, the Technical University of Denmark (DTU) and COWI Consulting Engineers and Planners AS present the two-stage gasification process, a concept for high efficiency gasification of biomass producing negligible amounts of tars. In the ......Based on more than 15 years of research and practical experience, the Technical University of Denmark (DTU) and COWI Consulting Engineers and Planners AS present the two-stage gasification process, a concept for high efficiency gasification of biomass producing negligible amounts of tars....... In the two-stage gasification concept, the pyrolysis and the gasification processes are physical separated. The volatiles from the pyrolysis are partially oxidized, and the hot gases are used as gasification medium to gasify the char. Hot gases from the gasifier and a combustion unit can be used for drying...... a cold gas efficiency exceeding 90% is obtained. In the original design of the two-stage gasification process, the pyrolysis unit consists of a screw conveyor with external heating, and the char unit is a fixed bed gasifier. This design is well proven during more than 1000 hours of testing with various...

  3. FREE GRAFT TWO-STAGE URETHROPLASTY FOR HYPOSPADIAS REPAIR

    Institute of Scientific and Technical Information of China (English)

    Zhong-jin Yue; Ling-jun Zuo; Jia-ji Wang; Gan-ping Zhong; Jian-ming Duan; Zhi-ping Wang; Da-shan Qin

    2005-01-01

    Objective To evaluate the effectiveness of free graft transplantation two-stage urethroplasty for hypospadias repair.Methods Fifty-eight cases with different types of hypospadias including 10 subcoronal, 36 penile shaft, 9 scrotal, and 3 perineal were treated with free full-thickness skin graft or (and) buccal mucosal graft transplantation two-stage urethroplasty. Of 58 cases, 45 were new cases, 13 had history of previous failed surgeries. Operative procedure included two stages: the first stage is to correct penile curvature (chordee), prepare transplanting bed, harvest and prepare full-thickness skin graft, buccal mucosal graft, and perform graft transplantation. The second stage is to complete urethroplasty and glanuloplasty.Results After the first stage operation, 56 of 58 cases (96.6%) were successful with grafts healing well, another 2foreskin grafts got gangrened. After the second stage operation on 56 cases, 5 cases failed with newly formed urethras opened due to infection, 8 cases had fistulas, 43 (76.8%) cases healed well.Conclusions Free graft transplantation two-stage urethroplasty for hypospadias repair is a kind of effective treatment with broad indication, comparatively high success rate, less complicationsand good cosmatic results, indicative of various types of hypospadias repair.

  4. Composite likelihood and two-stage estimation in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2004-01-01

    In this paper register based family studies provide the motivation for linking a two-stage estimation procedure in copula models for multivariate failure time data with a composite likelihood approach. The asymptotic properties of the estimators in both parametric and semi-parametric models are d...

  5. A two-stage rank test using density estimation

    NARCIS (Netherlands)

    Albers, Willem/Wim

    1995-01-01

    For the one-sample problem, a two-stage rank test is derived which realizes a required power against a given local alternative, for all sufficiently smooth underlying distributions. This is achieved using asymptotic expansions resulting in a precision of orderm −1, wherem is the size of the first

  6. The construction of customized two-stage tests

    NARCIS (Netherlands)

    Adema, Jos J.

    1990-01-01

    In this paper mixed integer linear programming models for customizing two-stage tests are given. Model constraints are imposed with respect to test composition, administration time, inter-item dependencies, and other practical considerations. It is not difficult to modify the models to make them use

  7. Convex Optimization without Projection Steps

    CERN Document Server

    Jaggi, Martin

    2011-01-01

    We study the general problem of minimizing a convex function over a compact convex domain. We will investigate a simple iterative approximation algorithm that does not need projection steps in order to stay inside the optimization domain. Instead of a projection step, the linearized problem defined by a current subgradient is solved, which gives a step direction that will naturally stay in the domain. The approach generalizes the sparse greedy algorithm of Clarkson (and the low-rank SDP solver by Hazan) to arbitrary convex domains, and to using subgradients for the case of non-differentiable convex functions. Analogously, we give a convergence proof guaranteeing {\\epsilon}-small duality gap after O(1/{\\epsilon}) iterations. The framework allows us understand the sparsity of approximate solutions for any l1-regularized convex optimization problem, expressed as a function of the approximation quality. We obtain matching upper and lower bounds of {\\Theta}(1/{\\epsilon}) for the sparsity for l1-problems. The same ...

  8. A two-stage broadcast message propagation model in social networks

    Science.gov (United States)

    Wang, Dan; Cheng, Shun-Jun

    2016-11-01

    Message propagation in social networks is becoming a popular topic in complex networks. One of the message types in social networks is called broadcast message. It refers to a type of message which has a unique and unknown destination for the publisher, such as 'lost and found'. Its propagation always has two stages. Due to this feature, rumor propagation model and epidemic propagation model have difficulty in describing this message's propagation accurately. In this paper, an improved two-stage susceptible-infected-removed model is proposed. We come up with the concept of the first forwarding probability and the second forwarding probability. Another part of our work is figuring out the influence to the successful message transmission chance in each level resulting from multiple reasons, including the topology of the network, the receiving probability, the first stage forwarding probability, the second stage forwarding probability as well as the length of the shortest path between the publisher and the relevant destination. The proposed model has been simulated on real networks and the results proved the model's effectiveness.

  9. Square Kilometre Array station configuration using two-stage beamforming

    CERN Document Server

    Jiwani, Aziz; Razavi-Ghods, Nima; Hall, Peter J; Padhi, Shantanu; de Vaate, Jan Geralt bij

    2012-01-01

    The lowest frequency band (70 - 450 MHz) of the Square Kilometre Array will consist of sparse aperture arrays grouped into geographically-localised patches, or stations. Signals from thousands of antennas in each station will be beamformed to produce station beams which form the inputs for the central correlator. Two-stage beamforming within stations can reduce SKA-low signal processing load and costs, but has not been previously explored for the irregular station layouts now favoured in radio astronomy arrays. This paper illustrates the effects of two-stage beamforming on sidelobes and effective area, for two representative station layouts (regular and irregular gridded tile on an irregular station). The performance is compared with a single-stage, irregular station. The inner sidelobe levels do not change significantly between layouts, but the more distant sidelobes are affected by the tile layouts; regular tile creates diffuse, but regular, grating lobes. With very sparse arrays, the station effective area...

  10. Two stage sorption type cryogenic refrigerator including heat regeneration system

    Science.gov (United States)

    Jones, Jack A.; Wen, Liang-Chi; Bard, Steven

    1989-01-01

    A lower stage chemisorption refrigeration system physically and functionally coupled to an upper stage physical adsorption refrigeration system is disclosed. Waste heat generated by the lower stage cycle is regenerated to fuel the upper stage cycle thereby greatly improving the energy efficiency of a two-stage sorption refrigerator. The two stages are joined by disposing a first pressurization chamber providing a high pressure flow of a first refrigerant for the lower stage refrigeration cycle within a second pressurization chamber providing a high pressure flow of a second refrigerant for the upper stage refrigeration cycle. The first pressurization chamber is separated from the second pressurization chamber by a gas-gap thermal switch which at times is filled with a thermoconductive fluid to allow conduction of heat from the first pressurization chamber to the second pressurization chamber.

  11. Recursive algorithm for the two-stage EFOP estimation method

    Institute of Scientific and Technical Information of China (English)

    LUO GuiMing; HUANG Jian

    2008-01-01

    A recursive algorithm for the two-stage empirical frequency-domain optimal param-eter (EFOP) estimation method Was proposed. The EFOP method was a novel sys-tem identificallon method for Black-box models that combines time-domain esti-mation and frequency-domain estimation. It has improved anti-disturbance perfor-mance, and could precisely identify models with fewer sample numbers. The two-stage EFOP method based on the boot-strap technique was generally suitable for Black-box models, but it was an iterative method and takes too much computation work so that it did not work well online. A recursive algorithm was proposed for dis-turbed stochastic systems. Some simulation examples are included to demonstrate the validity of the new method.

  12. Two-stage approach to full Chinese parsing

    Institute of Scientific and Technical Information of China (English)

    Cao Hailong; Zhao Tiejun; Yang Muyun; Li Sheng

    2005-01-01

    Natural language parsing is a task of great importance and extreme difficulty. In this paper, we present a full Chinese parsing system based on a two-stage approach. Rather than identifying all phrases by a uniform model, we utilize a divide and conquer strategy. We propose an effective and fast method based on Markov model to identify the base phrases. Then we make the first attempt to extend one of the best English parsing models i.e. the head-driven model to recognize Chinese complex phrases. Our two-stage approach is superior to the uniform approach in two aspects. First, it creates synergy between the Markov model and the head-driven model. Second, it reduces the complexity of full Chinese parsing and makes the parsing system space and time efficient. We evaluate our approach in PARSEVAL measures on the open test set, the parsing system performances at 87.53% precision, 87.95% recall.

  13. Income and Poverty across SMSAs: A Two-Stage Analysis

    OpenAIRE

    1993-01-01

    Two popular explanations of urban poverty are the "welfare-disincentive" and "urban-deindustrialization" theories. Using cross-sectional Census data, we develop a two-stage model to predict an SMSAs median family income and poverty rate. The model allows the city's welfare level and industrial structure to affect its median family income and poverty rate directly. It also allows welfare and industrial structure to affect income and poverty indirectly, through their effects on family structure...

  14. A Two-stage Polynomial Method for Spectrum Emissivity Modeling

    OpenAIRE

    Qiu, Qirong; Liu, Shi; Teng, Jing; Yan, Yong

    2015-01-01

    Spectral emissivity is a key in the temperature measurement by radiation methods, but not easy to determine in a combustion environment, due to the interrelated influence of temperature and wave length of the radiation. In multi-wavelength radiation thermometry, knowing the spectral emissivity of the material is a prerequisite. However in many circumstances such a property is a complex function of temperature and wavelength and reliable models are yet to be sought. In this study, a two stages...

  15. Measuring the Learning from Two-Stage Collaborative Group Exams

    CERN Document Server

    Ives, Joss

    2014-01-01

    A two-stage collaborative exam is one in which students first complete the exam individually, and then complete the same or similar exam in collaborative groups immediately afterward. To quantify the learning effect from the group component of these two-stage exams in an introductory Physics course, a randomized crossover design was used where each student participated in both the treatment and control groups. For each of the two two-stage collaborative group midterm exams, questions were designed to form matched near-transfer pairs with questions on an end-of-term diagnostic which was used as a learning test. For learning test questions paired with questions from the first midterm, which took place six to seven weeks before the learning test, an analysis using a mixed-effects logistic regression found no significant differences in learning-test performance between the control and treatment group. For learning test questions paired with questions from the second midterm, which took place one to two weeks prio...

  16. Decision Problems For Convex Languages

    CERN Document Server

    Brzozowski, Janusz; Xu, Zhi

    2008-01-01

    In this paper we examine decision problems associated with various classes of convex languages, studied by Ang and Brzozowski (under the name "continuous languages''). We show that we can decide whether a given language L is prefix-, suffix-, factor-, or subword-convex in polynomial time if L is represented by a DFA, but that the problem is PSPACE-hard if L is represented by an NFA. In the case that a regular language is not convex, we prove tight upper bounds on the length of the shortest words demonstrating this fact, in terms of the number of states of an accepting DFA. Similar results are proved for some subclasses of convex languages: the prefix-, suffix-, factor-, and subword-closed languages, and the prefix-, suffix-, factor-, and subword-free languages.

  17. Covering Numbers for Convex Functions

    CERN Document Server

    Guntuboyina, Adityanand

    2012-01-01

    In this paper we study the covering numbers of the space of convex and uniformly bounded functions in multi-dimension. We find optimal upper and lower bounds for the $\\epsilon$-covering number of $\\C([a, b]^d, B)$, in the $L_p$-metric, $1 \\le p 0$, and $\\C([a,b]^d, B)$ denotes the set of all convex functions on $[a, b]^d$ that are uniformly bounded by $B$. We summarize previously known results on covering numbers for convex functions and also provide alternate proofs of some known results. Our results have direct implications in the study of rates of convergence of empirical minimization procedures as well as optimal convergence rates in the numerous convexity constrained function estimation problems.

  18. Forty-five-degree two-stage venous cannula: advantages over standard two-stage venous cannulation.

    Science.gov (United States)

    Lawrence, D R; Desai, J B

    1997-01-01

    We present a 45-degree two-stage venous cannula that confers advantage to the surgeon using cardiopulmonary bypass. This cannula exits the mediastinum under the transverse bar of the sternal retractor, leaving the rostral end of the sternal incision free of apparatus. It allows for lifting of the heart with minimal effect on venous return and does not interfere with the radially laid out sutures of an aortic valve replacement using an interrupted suture technique.

  19. Complex Convexity of Orlicz Modular Sequence Spaces

    Directory of Open Access Journals (Sweden)

    Lili Chen

    2016-01-01

    Full Text Available The concepts of complex extreme points, complex strongly extreme points, complex strict convexity, and complex midpoint locally uniform convexity in general modular spaces are introduced. Then we prove that, for any Orlicz modular sequence space lΦ,ρ, lΦ,ρ is complex midpoint locally uniformly convex. As a corollary, lΦ,ρ is also complex strictly convex.

  20. Uniformly convex-transitive function spaces

    OpenAIRE

    Rambla-Barreno, Fernando; Talponen, Jarno

    2009-01-01

    We introduce a property of Banach spaces called uniform convex-transitivity, which falls between almost transitivity and convex-transitivity. We will provide examples of uniformly convex-transitive spaces. This property behaves nicely in connection with some Banach-valued function spaces. As a consequence, we obtain new examples of convex-transitive Banach spaces.

  1. On Fuzzy Simplex and Fuzzy Convex Hull

    Institute of Scientific and Technical Information of China (English)

    Dong QIU; Wei Quan ZHANG

    2011-01-01

    In this paper,we discuss fuzzy simplex and fuzzy convex hull,and give several representation theorems for fuzzy simplex and fuzzy convex hull.In addition,by giving a new characterization theorem of fuzzy convex hull,we improve some known results about fuzzy convex hull.

  2. The Convex Coordinates of the Symmedian Point

    Science.gov (United States)

    Boyd, J. N.; Raychowdhury, P. N.

    2006-01-01

    In this note, we recall the convex (or barycentric) coordinates of the points of a closed triangular region. We relate the convex and trilinear coordinates of the interior points of the triangular region. We use the relationship between convex and trilinear coordinates to calculate the convex coordinates of the symmedian point of the triangular…

  3. Convexity Adjustments for ATS Models

    DEFF Research Database (Denmark)

    Murgoci, Agatha; Gaspar, Raquel M.

    Practitioners are used to value a broad class of exotic interest rate derivatives simply by preforming for what is known as convexity adjustments (or convexity corrections). We start by exploiting the relations between various interest rate models and their connections to measure changes. As a re......Practitioners are used to value a broad class of exotic interest rate derivatives simply by preforming for what is known as convexity adjustments (or convexity corrections). We start by exploiting the relations between various interest rate models and their connections to measure changes....... As a result we classify convexity adjustments into forward adjustments and swaps adjustments. We, then, focus on affine term structure (ATS) models and, in this context, conjecture convexity adjustments should be related of affine functionals. In the case of forward adjustments, we show how to obtain exact...... formulas. Concretely for LIBOR in arrears (LIA) contracts, we derive the system of Riccatti ODE-s one needs to compute to obtain the exact adjustment. Based upon the ideas of Schrager and Pelsser (2006) we are also able to derive general swap adjustments useful, in particular, when dealing with constant...

  4. Compactly convex sets in linear topological spaces

    CERN Document Server

    Banakh, T; Ravsky, O

    2012-01-01

    A convex subset X of a linear topological space is called compactly convex if there is a continuous compact-valued map $\\Phi:X\\to exp(X)$ such that $[x,y]\\subset\\Phi(x)\\cup \\Phi(y)$ for all $x,y\\in X$. We prove that each convex subset of the plane is compactly convex. On the other hand, the space $R^3$ contains a convex set that is not compactly convex. Each compactly convex subset $X$ of a linear topological space $L$ has locally compact closure $\\bar X$ which is metrizable if and only if each compact subset of $X$ is metrizable.

  5. On Two-stage Seamless Adaptive Design in Clinical Trials

    Directory of Open Access Journals (Sweden)

    Shein-Chung Chow

    2008-12-01

    Full Text Available In recent years, the use of adaptive design methods in clinical research and development based on accrued data has become very popular because of its efficiency and flexibility in modifying trial and/or statistical procedures of ongoing clinical trials. One of the most commonly considered adaptive designs is probably a two-stage seamless adaptive trial design that combines two separate studies into one single study. In many cases, study endpoints considered in a two-stage seamless adaptive design may be similar but different (e.g. a biomarker versus a regular clinical endpoint or the same study endpoint with different treatment durations. In this case, it is important to determine how the data collected from both stages should be combined for the final analysis. It is also of interest to know how the sample size calculation/allocation should be done for achieving the study objectives originally set for the two stages (separate studies. In this article, formulas for sample size calculation/allocation are derived for cases in which the study endpoints are continuous, discrete (e.g. binary responses, and contain time-to-event data assuming that there is a well-established relationship between the study endpoints at different stages, and that the study objectives at different stages are the same. In cases in which the study objectives at different stages are different (e.g. dose finding at the first stage and efficacy confirmation at the second stage and when there is a shift in patient population caused by protocol amendments, the derived test statistics and formulas for sample size calculation and allocation are necessarily modified for controlling the overall type I error at the prespecified level.

  6. Two stage treatment of dairy effluent using immobilized Chlorella pyrenoidosa.

    Science.gov (United States)

    Yadavalli, Rajasri; Heggers, Goutham Rao Venkata Naga

    2013-12-19

    Dairy effluents contains high organic load and unscrupulous discharge of these effluents into aquatic bodies is a matter of serious concern besides deteriorating their water quality. Whilst physico-chemical treatment is the common mode of treatment, immobilized microalgae can be potentially employed to treat high organic content which offer numerous benefits along with waste water treatment. A novel low cost two stage treatment was employed for the complete treatment of dairy effluent. The first stage consists of treating the diary effluent in a photobioreactor (1 L) using immobilized Chlorella pyrenoidosa while the second stage involves a two column sand bed filtration technique. Whilst NH4+-N was completely removed, a 98% removal of PO43--P was achieved within 96 h of two stage purification processes. The filtrate was tested for toxicity and no mortality was observed in the zebra fish which was used as a model at the end of 96 h bioassay. Moreover, a significant decrease in biological oxygen demand and chemical oxygen demand was achieved by this novel method. Also the biomass separated was tested as a biofertilizer to the rice seeds and a 30% increase in terms of length of root and shoot was observed after the addition of biomass to the rice plants. We conclude that the two stage treatment of dairy effluent is highly effective in removal of BOD and COD besides nutrients like nitrates and phosphates. The treatment also helps in discharging treated waste water safely into the receiving water bodies since it is non toxic for aquatic life. Further, the algal biomass separated after first stage of treatment was highly capable of increasing the growth of rice plants because of nitrogen fixation ability of the green alga and offers a great potential as a biofertilizer.

  7. Two-stage series array SQUID amplifier for space applications

    Science.gov (United States)

    Tuttle, J. G.; DiPirro, M. J.; Shirron, P. J.; Welty, R. P.; Radparvar, M.

    We present test results for a two-stage integrated SQUID amplifier which uses a series array of d.c. SQUIDS to amplify the signal from a single input SQUID. The device was developed by Welty and Martinis at NIST and recent versions have been manufactured by HYPRES, Inc. Shielding and filtering techniques were employed during the testing to minimize the external noise. Energy resolution of 300 h was demonstrated using a d.c. excitation at frequencies above 1 kHz, and better than 500 h resolution was typical down to 300 Hz.

  8. A Two Stage Classification Approach for Handwritten Devanagari Characters

    CERN Document Server

    Arora, Sandhya; Nasipuri, Mita; Malik, Latesh

    2010-01-01

    The paper presents a two stage classification approach for handwritten devanagari characters The first stage is using structural properties like shirorekha, spine in character and second stage exploits some intersection features of characters which are fed to a feedforward neural network. Simple histogram based method does not work for finding shirorekha, vertical bar (Spine) in handwritten devnagari characters. So we designed a differential distance based technique to find a near straight line for shirorekha and spine. This approach has been tested for 50000 samples and we got 89.12% success

  9. Two-Stage Aggregate Formation via Streams in Myxobacteria

    Science.gov (United States)

    Alber, Mark; Kiskowski, Maria; Jiang, Yi

    2005-03-01

    In response to adverse conditions, myxobacteria form aggregates which develop into fruiting bodies. We model myxobacteria aggregation with a lattice cell model based entirely on short range (non-chemotactic) cell-cell interactions. Local rules result in a two-stage process of aggregation mediated by transient streams. Aggregates resemble those observed in experiment and are stable against even very large perturbations. Noise in individual cell behavior increases the effects of streams and result in larger, more stable aggregates. Phys. Rev. Lett. 93: 068301 (2004).

  10. Straw Gasification in a Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Bentzen, Jens Dall; Hindsgaul, Claus; Henriksen, Ulrik Birk

    2002-01-01

    Additive-prepared straw pellets were gasified in the 100 kW two-stage gasifier at The Department of Mechanical Engineering of the Technical University of Denmark (DTU). The fixed bed temperature range was 800-1000°C. In order to avoid bed sintering, as observed earlier with straw gasification...... residues were examined after the test. No agglomeration or sintering was observed in the ash residues. The tar content was measured both by solid phase amino adsorption (SPA) method and cold trapping (Petersen method). Both showed low tar contents (~42 mg/Nm3 without gas cleaning). The particle content...

  11. Two-Stage Fan I: Aerodynamic and Mechanical Design

    Science.gov (United States)

    Messenger, H. E.; Kennedy, E. E.

    1972-01-01

    A two-stage, highly-loaded fan was designed to deliver an overall pressure ratio of 2.8 with an adiabatic efficiency of 83.9 percent. At the first rotor inlet, design flow per unit annulus area is 42 lbm/sec/sq ft (205 kg/sec/sq m), hub/tip ratio is 0.4 with a tip diameter of 31 inches (0.787 m), and design tip speed is 1450 ft/sec (441.96 m/sec). Other features include use of multiple-circular-arc airfoils, resettable stators, and split casings over the rotor tip sections for casing treatment tests.

  12. Two-Stage Eagle Strategy with Differential Evolution

    CERN Document Server

    Yang, Xin-She

    2012-01-01

    Efficiency of an optimization process is largely determined by the search algorithm and its fundamental characteristics. In a given optimization, a single type of algorithm is used in most applications. In this paper, we will investigate the Eagle Strategy recently developed for global optimization, which uses a two-stage strategy by combing two different algorithms to improve the overall search efficiency. We will discuss this strategy with differential evolution and then evaluate their performance by solving real-world optimization problems such as pressure vessel and speed reducer design. Results suggest that we can reduce the computing effort by a factor of up to 10 in many applications.

  13. Powers of Convex-Cyclic Operators

    Directory of Open Access Journals (Sweden)

    Fernando León-Saavedra

    2014-01-01

    Full Text Available A bounded operator T on a Banach space X is convex cyclic if there exists a vector x such that the convex hull generated by the orbit Tnxn≥0 is dense in X. In this note we study some questions concerned with convex-cyclic operators. We provide an example of a convex-cyclic operator T such that the power Tn fails to be convex cyclic. Using this result we solve three questions posed by Rezaei (2013.

  14. A class of free locally convex spaces

    Science.gov (United States)

    Sipacheva, O. V.

    2003-04-01

    Stratifiable spaces are a natural generalization of metrizable spaces for which Dugundji's theorem holds. It is proved that the free locally convex space of a stratifiable space is stratifiable. This means, in particular, that the space of finitely supported probability measures on a stratifiable space is a retract of a locally convex space, and that each stratifiable convex subset of a locally convex space is a retract of a locally convex space.

  15. Taking Chances in Romantic Relationships

    Science.gov (United States)

    Elliott, Lindsey; Knox, David

    2016-01-01

    A 64 item Internet questionnaire was completed by 381 undergraduates at a large southeastern university to assess taking chances in romantic relationships. Almost three fourths (72%) self-identified as being a "person willing to take chances in my love relationship." Engaging in unprotected sex, involvement in a "friends with…

  16. Two-stage perceptual learning to break visual crowding.

    Science.gov (United States)

    Zhu, Ziyun; Fan, Zhenzhi; Fang, Fang

    2016-01-01

    When a target is presented with nearby flankers in the peripheral visual field, it becomes harder to identify, which is referred to as crowding. Crowding sets a fundamental limit of object recognition in peripheral vision, preventing us from fully appreciating cluttered visual scenes. We trained adult human subjects on a crowded orientation discrimination task and investigated whether crowding could be completely eliminated by training. We discovered a two-stage learning process with this training task. In the early stage, when the target and flankers were separated beyond a certain distance, subjects acquired a relatively general ability to break crowding, as evidenced by the fact that the breaking of crowding could transfer to another crowded orientation, even a crowded motion stimulus, although the transfer to the opposite visual hemi-field was weak. In the late stage, like many classical perceptual learning effects, subjects' performance gradually improved and showed specificity to the trained orientation. We also found that, when the target and flankers were spaced too finely, training could only reduce, rather than completely eliminate, the crowding effect. This two-stage learning process illustrates a learning strategy for our brain to deal with the notoriously difficult problem of identifying peripheral objects in clutter. The brain first learned to solve the "easy and general" part of the problem (i.e., improving the processing resolution and segmenting the target and flankers) and then tackle the "difficult and specific" part (i.e., refining the representation of the target).

  17. Runway Operations Planning: A Two-Stage Heuristic Algorithm

    Science.gov (United States)

    Anagnostakis, Ioannis; Clarke, John-Paul

    2003-01-01

    The airport runway is a scarce resource that must be shared by different runway operations (arrivals, departures and runway crossings). Given the possible sequences of runway events, careful Runway Operations Planning (ROP) is required if runway utilization is to be maximized. From the perspective of departures, ROP solutions are aircraft departure schedules developed by optimally allocating runway time for departures given the time required for arrivals and crossings. In addition to the obvious objective of maximizing throughput, other objectives, such as guaranteeing fairness and minimizing environmental impact, can also be incorporated into the ROP solution subject to constraints introduced by Air Traffic Control (ATC) procedures. This paper introduces a two stage heuristic algorithm for solving the Runway Operations Planning (ROP) problem. In the first stage, sequences of departure class slots and runway crossings slots are generated and ranked based on departure runway throughput under stochastic conditions. In the second stage, the departure class slots are populated with specific flights from the pool of available aircraft, by solving an integer program with a Branch & Bound algorithm implementation. Preliminary results from this implementation of the two-stage algorithm on real-world traffic data are presented.

  18. Two-Stage Heuristic Algorithm for Aircraft Recovery Problem

    Directory of Open Access Journals (Sweden)

    Cheng Zhang

    2017-01-01

    Full Text Available This study focuses on the aircraft recovery problem (ARP. In real-life operations, disruptions always cause schedule failures and make airlines suffer from great loss. Therefore, the main objective of the aircraft recovery problem is to minimize the total recovery cost and solve the problem within reasonable runtimes. An aircraft recovery model (ARM is proposed herein to formulate the ARP and use feasible line of flights as the basic variables in the model. We define the feasible line of flights (LOFs as a sequence of flights flown by an aircraft within one day. The number of LOFs exponentially grows with the number of flights. Hence, a two-stage heuristic is proposed to reduce the problem scale. The algorithm integrates a heuristic scoring procedure with an aggregated aircraft recovery model (AARM to preselect LOFs. The approach is tested on five real-life test scenarios. The computational results show that the proposed model provides a good formulation of the problem and can be solved within reasonable runtimes with the proposed methodology. The two-stage heuristic significantly reduces the number of LOFs after each stage and finally reduces the number of variables and constraints in the aircraft recovery model.

  19. Chance-Constrained AC Optimal Power Flow for Distribution Systems With Renewables

    Energy Technology Data Exchange (ETDEWEB)

    DallAnese, Emiliano; Baker, Kyri; Summers, Tyler

    2017-09-01

    This paper focuses on distribution systems featuring renewable energy sources (RESs) and energy storage systems, and presents an AC optimal power flow (OPF) approach to optimize system-level performance objectives while coping with uncertainty in both RES generation and loads. The proposed method hinges on a chance-constrained AC OPF formulation where probabilistic constraints are utilized to enforce voltage regulation with prescribed probability. A computationally more affordable convex reformulation is developed by resorting to suitable linear approximations of the AC power-flow equations as well as convex approximations of the chance constraints. The approximate chance constraints provide conservative bounds that hold for arbitrary distributions of the forecasting errors. An adaptive strategy is then obtained by embedding the proposed AC OPF task into a model predictive control framework. Finally, a distributed solver is developed to strategically distribute the solution of the optimization problems across utility and customers.

  20. The genealogy of convex solids

    CERN Document Server

    Domokos, Gabor; Szabó, Timea

    2012-01-01

    The shape of homogeneous, smooth convex bodies as described by the Euclidean distance from the center of gravity represents a rather restricted class M_C of Morse-Smale functions on S^2. Here we show that even M_C exhibits the complexity known for general Morse-Smale functions on S^2 by exhausting all combinatorial possibilities: every 2-colored quadrangulation of the sphere is isomorphic to a suitably represented Morse-Smale complex associated with a function in M_C (and vice versa). We prove our claim by an inductive algorithm, starting from the path graph P_2 and generating convex bodies corresponding to quadrangulations with increasing number of vertices by performing each combinatorially possible vertex splitting by a convexity- preserving local manipulation of the surface. Since convex bodies carrying Morse-Smale complexes isomorphic to P_2 exist, this algorithm not only proves our claim but also defines a hierarchical order among convex solids and general- izes the known classification scheme in [35], ...

  1. NP-completeness of weakly convex and convex dominating set decision problems

    Directory of Open Access Journals (Sweden)

    Joanna Raczek

    2004-01-01

    Full Text Available The convex domination number and the weakly convex domination number are new domination parameters. In this paper we show that the decision problems of convex and weakly convex dominating sets are \\(NP\\-complete for bipartite and split graphs. Using a modified version of Warshall algorithm we can verify in polynomial time whether a given subset of vertices of a graph is convex or weakly convex.

  2. Two-Stage Part-Based Pedestrian Detection

    DEFF Research Database (Denmark)

    Møgelmose, Andreas; Prioletti, Antonio; Trivedi, Mohan M.

    2012-01-01

    Detecting pedestrians is still a challenging task for automotive vision system due the extreme variability of targets, lighting conditions, occlusions, and high speed vehicle motion. A lot of research has been focused on this problem in the last 10 years and detectors based on classifiers has...... gained a special place among the different approaches presented. This work presents a state-of-the-art pedestrian detection system based on a two stages classifier. Candidates are extracted with a Haar cascade classifier trained with the DaimlerDB dataset and then validated through part-based HOG...... of several metrics, such as detection rate, false positives per hour, and frame rate. The novelty of this system rely in the combination of HOG part-based approach, tracking based on specific optimized feature and porting on a real prototype....

  3. A two-stage method for inverse medium scattering

    KAUST Repository

    Ito, Kazufumi

    2013-03-01

    We present a novel numerical method to the time-harmonic inverse medium scattering problem of recovering the refractive index from noisy near-field scattered data. The approach consists of two stages, one pruning step of detecting the scatterer support, and one resolution enhancing step with nonsmooth mixed regularization. The first step is strictly direct and of sampling type, and it faithfully detects the scatterer support. The second step is an innovative application of nonsmooth mixed regularization, and it accurately resolves the scatterer size as well as intensities. The nonsmooth model can be efficiently solved by a semi-smooth Newton-type method. Numerical results for two- and three-dimensional examples indicate that the new approach is accurate, computationally efficient, and robust with respect to data noise. © 2012 Elsevier Inc.

  4. Laparoscopic management of a two staged gall bladdertorsion

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Gall bladder torsion (GBT) is a relatively uncommonentity and rarely diagnosed preoperatively. A constantfactor in all occurrences of GBT is a freely mobilegall bladder due to congenital or acquired anomalies.GBT is commonly observed in elderly white females.We report a 77-year-old, Caucasian lady who wasoriginally diagnosed as gall bladder perforation butwas eventually found with a two staged torsion of thegall bladder with twisting of the Riedel's lobe (partof tongue like projection of liver segment 4A). Thistogether, has not been reported in literature, to thebest of our knowledge. We performed laparoscopiccholecystectomy and she had an uneventful postoperativeperiod. GBT may create a diagnostic dilemmain the context of acute cholecystitis. Timely diagnosisand intervention is necessary, with extra care whileoperating as the anatomy is generally distorted. Thefundus first approach can be useful due to alteredanatomy in the region of Calot's triangle. Laparoscopiccholecystectomy has the benefit of early recovery.

  5. Lightweight Concrete Produced Using a Two-Stage Casting Process

    Directory of Open Access Journals (Sweden)

    Jin Young Yoon

    2015-03-01

    Full Text Available The type of lightweight aggregate and its volume fraction in a mix determine the density of lightweight concrete. Minimizing the density obviously requires a higher volume fraction, but this usually causes aggregates segregation in a conventional mixing process. This paper proposes a two-stage casting process to produce a lightweight concrete. This process involves placing lightweight aggregates in a frame and then filling in the remaining interstitial voids with cementitious grout. The casting process results in the lowest density of lightweight concrete, which consequently has low compressive strength. The irregularly shaped aggregates compensate for the weak point in terms of strength while the round-shape aggregates provide a strength of 20 MPa. Therefore, the proposed casting process can be applied for manufacturing non-structural elements and structural composites requiring a very low density and a strength of at most 20 MPa.

  6. TWO-STAGE OCCLUDED OBJECT RECOGNITION METHOD FOR MICROASSEMBLY

    Institute of Scientific and Technical Information of China (English)

    WANG Huaming; ZHU Jianying

    2007-01-01

    A two-stage object recognition algorithm with the presence of occlusion is presented for microassembly. Coarse localization determines whether template is in image or not and approximately where it is, and fine localization gives its accurate position. In coarse localization, local feature, which is invariant to translation, rotation and occlusion, is used to form signatures. By comparing signature of template with that of image, approximate transformation parameter from template to image is obtained, which is used as initial parameter value for fine localization. An objective function, which is a function of transformation parameter, is constructed in fine localization and minimized to realize sub-pixel localization accuracy. The occluded pixels are not taken into account in objective function, so the localization accuracy will not be influenced by the occlusion.

  7. Two-stage designs for cross-over bioequivalence trials.

    Science.gov (United States)

    Kieser, Meinhard; Rauch, Geraldine

    2015-07-20

    The topic of applying two-stage designs in the field of bioequivalence studies has recently gained attention in the literature and in regulatory guidelines. While there exists some methodological research on the application of group sequential designs in bioequivalence studies, implementation of adaptive approaches has focused up to now on superiority and non-inferiority trials. Especially, no comparison of the features and performance characteristics of these designs has been performed, and therefore, the question of which design to employ in this setting remains open. In this paper, we discuss and compare 'classical' group sequential designs and three types of adaptive designs that offer the option of mid-course sample size recalculation. A comprehensive simulation study demonstrates that group sequential designs can be identified, which show power characteristics that are similar to those of the adaptive designs but require a lower average sample size. The methods are illustrated with a real bioequivalence study example.

  8. The hybrid two stage anticlockwise cycle for ecological energy conversion

    Directory of Open Access Journals (Sweden)

    Cyklis Piotr

    2016-01-01

    Full Text Available The anticlockwise cycle is commonly used for refrigeration, air conditioning and heat pumps applications. The application of refrigerant in the compression cycle is within the temperature limits of the triple point and the critical point. New refrigerants such as 1234yf or 1234ze have many disadvantages, therefore natural refrigerants application is favourable. The carbon dioxide and water can be applied only in the hybrid two stages cycle. The possibilities of this solutions are shown for refrigerating applications, as well some experimental results of the adsorption-compression double stages cycle, powered with solar collectors are shown. As a high temperature cycle the adsorption system is applied. The low temperature cycle is the compression stage with carbon dioxide as a working fluid. This allows to achieve relatively high COP for low temperature cycle and for the whole system.

  9. Two Stage Assessment of Thermal Hazard in An Underground Mine

    Science.gov (United States)

    Drenda, Jan; Sułkowski, Józef; Pach, Grzegorz; Różański, Zenon; Wrona, Paweł

    2016-06-01

    The results of research into the application of selected thermal indices of men's work and climate indices in a two stage assessment of climatic work conditions in underground mines have been presented in this article. The difference between these two kinds of indices was pointed out during the project entitled "The recruiting requirements for miners working in hot underground mine environments". The project was coordinated by The Institute of Mining Technologies at Silesian University of Technology. It was a part of a Polish strategic project: "Improvement of safety in mines" being financed by the National Centre of Research and Development. Climate indices are based only on physical parameters of air and their measurements. Thermal indices include additional factors which are strictly connected with work, e.g. thermal resistance of clothing, kind of work etc. Special emphasis has been put on the following indices - substitute Silesian temperature (TS) which is considered as the climatic index, and the thermal discomfort index (δ) which belongs to the thermal indices group. The possibility of the two stage application of these indices has been taken into consideration (preliminary and detailed estimation). Based on the examples it was proved that by the application of thermal hazard (detailed estimation) it is possible to avoid the use of additional technical solutions which would be necessary to reduce thermal hazard in particular work places according to the climate index. The threshold limit value for TS has been set, based on these results. It was shown that below TS = 24°C it is not necessary to perform detailed estimation.

  10. Local Routing in Convex Subdivisions

    DEFF Research Database (Denmark)

    Bose, Prosenjit; Durocher, Stephane; Mondal, Debajyoti;

    2015-01-01

    In various wireless networking settings, node locations determine a network’s topology, allowing the network to be modelled by a geometric graph drawn in the plane. Without any additional information, local geometric routing algorithms can guarantee delivery to the target node only in restricted...... classes of geometric graphs, such as triangulations. In order to guarantee delivery on more general classes of geometric graphs (e.g., convex subdivisions or planar subdivisions), previous local geometric routing algorithms required Θ(logn) state bits to be stored and passed with the message. We present...... the first local geometric routing algorithm using only one state bit to guarantee delivery on convex subdivisions and the first local geometric memoryless routing algorithm that guarantees delivery on edge-augmented monotone subdivisions (including all convex subdivisions) when the algorithm has knowledge...

  11. Effect of Silica Fume on two-stage Concrete Strength

    Science.gov (United States)

    Abdelgader, H. S.; El-Baden, A. S.

    2015-11-01

    Two-stage concrete (TSC) is an innovative concrete that does not require vibration for placing and compaction. TSC is a simple concept; it is made using the same basic constituents as traditional concrete: cement, coarse aggregate, sand and water as well as mineral and chemical admixtures. As its name suggests, it is produced through a two-stage process. Firstly washed coarse aggregate is placed into the formwork in-situ. Later a specifically designed self compacting grout is introduced into the form from the lowest point under gravity pressure to fill the voids, cementing the aggregate into a monolith. The hardened concrete is dense, homogeneous and has in general improved engineering properties and durability. This paper presents the results from a research work attempt to study the effect of silica fume (SF) and superplasticizers admixtures (SP) on compressive and tensile strength of TSC using various combinations of water to cement ratio (w/c) and cement to sand ratio (c/s). Thirty six concrete mixes with different grout constituents were tested. From each mix twenty four standard cylinder samples of size (150mm×300mm) of concrete containing crushed aggregate were produced. The tested samples were made from combinations of w/c equal to: 0.45, 0.55 and 0.85, and three c/s of values: 0.5, 1 and 1.5. Silica fume was added at a dosage of 6% of weight of cement, while superplasticizer was added at a dosage of 2% of cement weight. Results indicated that both tensile and compressive strength of TSC can be statistically derived as a function of w/c and c/s with good correlation coefficients. The basic principle of traditional concrete, which says that an increase in water/cement ratio will lead to a reduction in compressive strength, was shown to hold true for TSC specimens tested. Using a combination of both silica fume and superplasticisers caused a significant increase in strength relative to control mixes.

  12. Quantum information and convex optimization

    Energy Technology Data Exchange (ETDEWEB)

    Reimpell, Michael

    2008-07-01

    This thesis is concerned with convex optimization problems in quantum information theory. It features an iterative algorithm for optimal quantum error correcting codes, a postprocessing method for incomplete tomography data, a method to estimate the amount of entanglement in witness experiments, and it gives necessary and sufficient criteria for the existence of retrodiction strategies for a generalized mean king problem. (orig.)

  13. Characterization of component interactions in two-stage axial turbine

    Directory of Open Access Journals (Sweden)

    Adel Ghenaiet

    2016-08-01

    Full Text Available This study concerns the characterization of both the steady and unsteady flows and the analysis of stator/rotor interactions of a two-stage axial turbine. The predicted aerodynamic performances show noticeable differences when simulating the turbine stages simultaneously or separately. By considering the multi-blade per row and the scaling technique, the Computational fluid dynamics (CFD produced better results concerning the effect of pitchwise positions between vanes and blades. The recorded pressure fluctuations exhibit a high unsteadiness characterized by a space–time periodicity described by a double Fourier decomposition. The Fast Fourier Transform FFT analysis of the static pressure fluctuations recorded at different interfaces reveals the existence of principal harmonics and their multiples, and each lobed structure of pressure wave corresponds to the number of vane/blade count. The potential effect is seen to propagate both upstream and downstream of each blade row and becomes accentuated at low mass flow rates. Between vanes and blades, the potential effect is seen to dominate the quasi totality of blade span, while downstream the blades this effect seems to dominate from hub to mid span. Near the shroud the prevailing effect is rather linked to the blade tip flow structure.

  14. A continuous two stage solar coal gasification system

    Science.gov (United States)

    Mathur, V. K.; Breault, R. W.; Lakshmanan, S.; Manasse, F. K.; Venkataramanan, V.

    The characteristics of a two-stage fluidized-bed hybrid coal gasification system to produce syngas from coal, lignite, and peat are described. Devolatilization heat of 823 K is supplied by recirculating gas heated by a solar receiver/coal heater. A second-stage gasifier maintained at 1227 K serves to crack remaining tar and light oil to yield a product free from tar and other condensables, and sulfur can be removed by hot clean-up processes. CO is minimized because the coal is not burned with oxygen, and the product gas contains 50% H2. Bench scale reactors consist of a stage I unit 0.1 m in diam which is fed coal 200 microns in size. A stage II reactor has an inner diam of 0.36 m and serves to gasify the char from stage I. A solar power source of 10 kWt is required for the bench model, and will be obtained from a central receiver with quartz or heat pipe configurations for heat transfer.

  15. Characterization of component interactions in two-stage axial turbine

    Institute of Scientific and Technical Information of China (English)

    Adel Ghenaiet; Kaddour Touil

    2016-01-01

    This study concerns the characterization of both the steady and unsteady flows and the analysis of stator/rotor interactions of a two-stage axial turbine. The predicted aerodynamic perfor-mances show noticeable differences when simulating the turbine stages simultaneously or sepa-rately. By considering the multi-blade per row and the scaling technique, the Computational fluid dynamics (CFD) produced better results concerning the effect of pitchwise positions between vanes and blades. The recorded pressure fluctuations exhibit a high unsteadiness characterized by a space–time periodicity described by a double Fourier decomposition. The Fast Fourier Transform FFT analysis of the static pressure fluctuations recorded at different interfaces reveals the existence of principal harmonics and their multiples, and each lobed structure of pressure wave corresponds to the number of vane/blade count. The potential effect is seen to propagate both upstream and downstream of each blade row and becomes accentuated at low mass flow rates. Between vanes and blades, the potential effect is seen to dominate the quasi totality of blade span, while down-stream the blades this effect seems to dominate from hub to mid span. Near the shroud the prevail-ing effect is rather linked to the blade tip flow structure.

  16. Two stages kinetics of municipal solid waste inoculation composting processes

    Institute of Scientific and Technical Information of China (English)

    XI Bei-dou1; HUANG Guo-he; QIN Xiao-sheng; LIU Hong-liang

    2004-01-01

    In order to understand the key mechanisms of the composting processes, the municipal solid waste(MSW) composting processes were divided into two stages, and the characteristics of typical experimental scenarios from the viewpoint of microbial kinetics was analyzed. Through experimentation with advanced composting reactor under controlled composting conditions, several equations were worked out to simulate the degradation rate of the substrate. The equations showed that the degradation rate was controlled by concentration of microbes in the first stage. The degradation rates of substrates of inoculation Run A, B, C and Control composting systems were 13.61 g/(kg·h), 13.08 g/(kg·h), 15.671 g/(kg·h), and 10.5 g/(kg·h), respectively. The value of Run C is around 1.5 times higher than that of Control system. The decomposition rate of the second stage is controlled by concentration of substrate. Although the organic matter decomposition rates were similar to all Runs, inoculation could reduce the values of the half velocity coefficient and could be more efficient to make the composting stable. Particularly. For Run C, the decomposition rate is high in the first stage, and is low in the second stage. The results indicated that the inoculation was efficient for the composting processes.

  17. Gas loading system for LANL two-stage gas guns

    Science.gov (United States)

    Gibson, Lee; Bartram, Brian; Dattelbaum, Dana; Lang, John; Morris, John

    2015-06-01

    A novel gas loading system was designed for the specific application of remotely loading high purity gases into targets for gas-gun driven plate impact experiments. The high purity gases are loaded into well-defined target configurations to obtain Hugoniot states in the gas phase at greater than ambient pressures. The small volume of the gas samples is challenging, as slight changing in the ambient temperature result in measurable pressure changes. Therefore, the ability to load a gas gun target and continually monitor the sample pressure prior to firing provides the most stable and reliable target fielding approach. We present the design and evaluation of a gas loading system built for the LANL 50 mm bore two-stage light gas gun. Targets for the gun are made of 6061 Al or OFHC Cu, and assembled to form a gas containment cell with a volume of approximately 1.38 cc. The compatibility of materials was a major consideration in the design of the system, particularly for its use with corrosive gases. Piping and valves are stainless steel with wetted seals made from Kalrez and Teflon. Preliminary testing was completed to ensure proper flow rate and that the proper safety controls were in place. The system has been used to successfully load Ar, Kr, Xe, and anhydrous ammonia with purities of up to 99.999 percent. The design of the system, and example data from the plate impact experiments will be shown. LA-UR-15-20521

  18. A Microscopic Convexity Principle for Spacetime Convex Solutions of Fully Nonlinear Parabolic Equations

    Institute of Scientific and Technical Information of China (English)

    Chuan Qiang CHEN; Bo Wen HU

    2013-01-01

    We study microscopic spacetime convexity properties of fully nonlinear parabolic partial differential equations.Under certain general structure condition,we establish a constant rank theorem for the spacetime convex solutions of fully nonlinear parabolic equations.At last,we consider the parabolic convexity of solutions to parabolic equations and the convexity of the spacetime second fundamental form of geometric flows.

  19. Revisiting separation properties of convex fuzzy sets

    Science.gov (United States)

    Separation of convex sets by hyperplanes has been extensively studied on crisp sets. In a seminal paper separability and convexity are investigated, however there is a flaw on the definition of degree of separation. We revisited separation on convex fuzzy sets that have level-wise (crisp) disjointne...

  20. A Note on Permutationally Convex Games

    NARCIS (Netherlands)

    van Velzen, S.; Hamers, H.J.M.; Norde, H.W.

    2005-01-01

    In this paper we generalise marginal vectors and permutational convexity.We show that if a game is generalised permutationally convex, then the corresponding generalised marginal vector is a core element.Furthermore we refine the concept of permutational convexity and show that this refinement yield

  1. On Uniform Convexity of Banach Spaces

    Institute of Scientific and Technical Information of China (English)

    Qing Jin CHENG; Bo WANG; Cui Ling WANG

    2011-01-01

    This paper gives some relations and properties of several kinds of generalized convexity in Banach spaces. As a result, it proves that every kind of uniform convexity implies the Banach-Sakes property, and several notions of uniform convexity in literature are actually equivalent.

  2. Computing farthest neighbors on a convex polytope

    NARCIS (Netherlands)

    Cheong, O.; Shin, C.S.; Vigneron, A.

    2002-01-01

    Let N be a set of n points in convex position in R3. The farthest-point Voronoi diagram of N partitions R³ into n convex cells. We consider the intersection G(N) of the diagram with the boundary of the convex hull of N. We give an algorithm that computes an implicit representation of G(N) in expecte

  3. Computing farthest neighbors on a convex polytope

    NARCIS (Netherlands)

    Cheong, O.; Shin, C.S.; Vigneron, A.

    2002-01-01

    Let N be a set of n points in convex position in R3. The farthest-point Voronoi diagram of N partitions R³ into n convex cells. We consider the intersection G(N) of the diagram with the boundary of the convex hull of N. We give an algorithm that computes an implicit representation of G(N) in

  4. Generalized geometrically convex functions and inequalities.

    Science.gov (United States)

    Noor, Muhammad Aslam; Noor, Khalida Inayat; Safdar, Farhat

    2017-01-01

    In this paper, we introduce and study a new class of generalized functions, called generalized geometrically convex functions. We establish several basic inequalities related to generalized geometrically convex functions. We also derive several new inequalities of the Hermite-Hadamard type for generalized geometrically convex functions. Several special cases are discussed, which can be deduced from our main results.

  5. Firey linear combinations of convex bodies

    Institute of Scientific and Technical Information of China (English)

    XIONG Ge; XIAO Qi-ming; CHEUNG Wing-Sum

    2009-01-01

    For convex bodies, the Firey linear combinations were introduced and studied in several papers. In this paper the mean width of the Firey linear combinations of convex bodies is studied, and the lower bound of the mean width of the Firey linear combinations of convex body and its polar body is given.

  6. PERFORMANCE STUDY OF A TWO STAGE SOLAR ADSORPTION REFRIGERATION SYSTEM

    Directory of Open Access Journals (Sweden)

    BAIJU. V

    2011-07-01

    Full Text Available The present study deals with the performance of a two stage solar adsorption refrigeration system with activated carbon-methanol pair investigated experimentally. Such a system was fabricated and tested under the conditions of National Institute of Technology Calicut, Kerala, India. The system consists of a parabolic solar concentrator,two water tanks, two adsorbent beds, condenser, expansion device, evaporator and accumulator. In this particular system the second water tank is act as a sensible heat storage device so that the system can be used during night time also. The system has been designed for heating 50 litres of water from 25oC to 90oC as well ascooling 10 litres of water from 30oC to 10oC within one hour. The performance parameters such as specific cooling power (SCP, coefficient of performance, solar COP and exergetic efficiency are studied. The dependency between the exergetic efficiency and cycle COP with the driving heat source temperature is also studied. The optimum heat source temperature for this system is determined as 72.4oC. The results show that the system has better performance during night time as compared to the day time. The system has a mean cycle COP of 0.196 during day time and 0.335 for night time. The mean SCP values during day time and night time are 47.83 and 68.2, respectively. The experimental results also demonstrate that the refrigerator has cooling capacity of 47 to 78 W during day time and 57.6 W to 104.4W during night time.

  7. A noncommutative convexity in C*-bimodules

    Directory of Open Access Journals (Sweden)

    Mohsen Kian

    2017-02-01

    Full Text Available Let A and B be C*-algebras. We consider a noncommutative convexity in Hilbert A-B-bimodules, called A-B-convexity, as a generalization of C*-convexity in C*-algebras. We show that if X is a Hilbert A-B-bimodule, then Mn(X is a Hilbert Mn(A-Mn(B-bimodule and apply it to show that the closed unit ball of every Hilbert A-B-bimodule is A-B-convex. Some properties of this kind of convexity and various examples have been given.

  8. Giving them a second chance

    Energy Technology Data Exchange (ETDEWEB)

    Mohn, L.

    Manaties are finding a haven in the warm water discharges from Florida power plants. They and other endangered species are the subject of a short film, A Second Chance, which tells the story of the efforts electric utilities are making to give wildlife another chance. The movie shows 15 programs of participating utilities to identify and promote activities with a positive environmental impact on bald eagles, crocodiles, bighorn sheep, and other threatened species. The film is available in print or broadcast tape form. (DCK)

  9. Evaluating convex roof entanglement measures.

    Science.gov (United States)

    Tóth, Géza; Moroder, Tobias; Gühne, Otfried

    2015-04-24

    We show a powerful method to compute entanglement measures based on convex roof constructions. In particular, our method is applicable to measures that, for pure states, can be written as low order polynomials of operator expectation values. We show how to compute the linear entropy of entanglement, the linear entanglement of assistance, and a bound on the dimension of the entanglement for bipartite systems. We discuss how to obtain the convex roof of the three-tangle for three-qubit states. We also show how to calculate the linear entropy of entanglement and the quantum Fisher information based on partial information or device independent information. We demonstrate the usefulness of our method by concrete examples.

  10. Convex Hulls of Algebraic Sets

    CERN Document Server

    Gouveia, João

    2010-01-01

    This article describes a method to compute successive convex approximations of the convex hull of a set of points in R^n that are the solutions to a system of polynomial equations over the reals. The method relies on sums of squares of polynomials and the dual theory of moment matrices. The main feature of the technique is that all computations are done modulo the ideal generated by the polynomials defining the set to the convexified. This work was motivated by questions raised by Lov\\'asz concerning extensions of the theta body of a graph to arbitrary real algebraic varieties, and hence the relaxations described here are called theta bodies. The convexification process can be seen as an incarnation of Lasserre's hierarchy of convex relaxations of a semialgebraic set in R^n. When the defining ideal is real radical the results become especially nice. We provide several examples of the method and discuss convergence issues. Finite convergence, especially after the first step of the method, can be described expl...

  11. Seksualitet mellem risiko og chance

    DEFF Research Database (Denmark)

    Heinskou, Marie Bruvik

    2007-01-01

    Artiklen beskæftiger sig med unge voksnes seksuelle adfærd, risikohåndtering og selvfortællinger. Især fokuseres på krydsfeltet mellem risiko og chance som to modsatrettede værdiorienteringer....

  12. Life, Death, and Second Chances

    Science.gov (United States)

    ... Bar Home Current Issue Past Issues Special Section Life, Death, and Second Chances Past Issues / Fall 2007 Table of Contents For an enhanced version of this page please turn Javascript on. Before Diane ... for her life. Was there any hope at all? Dr. Richard ...

  13. Right Axillary Sweating After Left Thoracoscopic Sypathectomy in Two-Stage Surgery

    Directory of Open Access Journals (Sweden)

    Berkant Ozpolat

    2013-06-01

    Full Text Available One stage bilateral or two stage unilateral video assisted thoracoscopic sympathectomy could be performed in the treatment of primary focal hyperhidrosis. Here we present a case with compensatory sweating of contralateral side after a two stage operation.

  14. The Two-stage Constrained Equal Awards and Losses Rules for Multi-Issue Allocation Situation

    NARCIS (Netherlands)

    Lorenzo-Freire, S.; Casas-Mendez, B.; Hendrickx, R.L.P.

    2005-01-01

    This paper considers two-stage solutions for multi-issue allocation situations.Characterisations are provided for the two-stage constrained equal awards and constrained equal losses rules, based on the properties of composition and path independence.

  15. Adaptive Urban Stormwater Management Using a Two-stage Stochastic Optimization Model

    Science.gov (United States)

    Hung, F.; Hobbs, B. F.; McGarity, A. E.

    2014-12-01

    In many older cities, stormwater results in combined sewer overflows (CSOs) and consequent water quality impairments. Because of the expense of traditional approaches for controlling CSOs, cities are considering the use of green infrastructure (GI) to reduce runoff and pollutants. Examples of GI include tree trenches, rain gardens, green roofs, and rain barrels. However, the cost and effectiveness of GI are uncertain, especially at the watershed scale. We present a two-stage stochastic extension of the Stormwater Investment Strategy Evaluation (StormWISE) model (A. McGarity, JWRPM, 2012, 111-24) to explicitly model and optimize these uncertainties in an adaptive management framework. A two-stage model represents the immediate commitment of resources ("here & now") followed by later investment and adaptation decisions ("wait & see"). A case study is presented for Philadelphia, which intends to extensively deploy GI over the next two decades (PWD, "Green City, Clean Water - Implementation and Adaptive Management Plan," 2011). After first-stage decisions are made, the model updates the stochastic objective and constraints (learning). We model two types of "learning" about GI cost and performance. One assumes that learning occurs over time, is automatic, and does not depend on what has been done in stage one (basic model). The other considers learning resulting from active experimentation and learning-by-doing (advanced model). Both require expert probability elicitations, and learning from research and monitoring is modelled by Bayesian updating (as in S. Jacobi et al., JWRPM, 2013, 534-43). The model allocates limited financial resources to GI investments over time to achieve multiple objectives with a given reliability. Objectives include minimizing construction and O&M costs; achieving nutrient, sediment, and runoff volume targets; and community concerns, such as aesthetics, CO2 emissions, heat islands, and recreational values. CVaR (Conditional Value at Risk) and

  16. Two-Stage Exams Improve Student Learning in an Introductory Geology Course: Logistics, Attendance, and Grades

    Science.gov (United States)

    Knierim, Katherine; Turner, Henry; Davis, Ralph K.

    2015-01-01

    Two-stage exams--where students complete part one of an exam closed book and independently and part two is completed open book and independently (two-stage independent, or TS-I) or collaboratively (two-stage collaborative, or TS-C)--provide a means to include collaborative learning in summative assessments. Collaborative learning has been shown to…

  17. Two-Stage Multi-Objective Collaborative Scheduling for Wind Farm and Battery Switch Station

    Directory of Open Access Journals (Sweden)

    Zhe Jiang

    2016-10-01

    Full Text Available In order to deal with the uncertainties of wind power, wind farm and electric vehicle (EV battery switch station (BSS were proposed to work together as an integrated system. In this paper, the collaborative scheduling problems of such a system were studied. Considering the features of the integrated system, three indices, which include battery swapping demand curtailment of BSS, wind curtailment of wind farm, and generation schedule tracking of the integrated system are proposed. In addition, a two-stage multi-objective collaborative scheduling model was designed. In the first stage, a day-ahead model was built based on the theory of dependent chance programming. With the aim of maximizing the realization probabilities of these three operating indices, random fluctuations of wind power and battery switch demand were taken into account simultaneously. In order to explore the capability of BSS as reserve, the readjustment process of the BSS within each hour was considered in this stage. In addition, the stored energy rather than the charging/discharging power of BSS during each period was optimized, which will provide basis for hour-ahead further correction of BSS. In the second stage, an hour-ahead model was established. In order to cope with the randomness of wind power and battery swapping demand, the proposed hour-ahead model utilized ultra-short term prediction of the wind power and the battery switch demand to schedule the charging/discharging power of BSS in a rolling manner. Finally, the effectiveness of the proposed models was validated by case studies. The simulation results indicated that the proposed model could realize complement between wind farm and BSS, reduce the dependence on power grid, and facilitate the accommodation of wind power.

  18. Use of Convexity in Ostomy Care

    Science.gov (United States)

    Salvadalena, Ginger; Pridham, Sue; Droste, Werner; McNichol, Laurie; Gray, Mikel

    2017-01-01

    Ostomy skin barriers that incorporate a convexity feature have been available in the marketplace for decades, but limited resources are available to guide clinicians in selection and use of convex products. Given the widespread use of convexity, and the need to provide practical guidelines for appropriate use of pouching systems with convex features, an international consensus panel was convened to provide consensus-based guidance for this aspect of ostomy practice. Panelists were provided with a summary of relevant literature in advance of the meeting; these articles were used to generate and reach consensus on 26 statements during a 1-day meeting. Consensus was achieved when 80% of panelists agreed on a statement using an anonymous electronic response system. The 26 statements provide guidance for convex product characteristics, patient assessment, convexity use, and outcomes. PMID:28002174

  19. CONVEX CLASS OF STARLIKE FUNCTIONS

    OpenAIRE

    Gupta, V. P.

    1984-01-01

    Let $S$ denote the class of functions of the form $f(z)=z-¥sum_{n=2}^{¥infty}|a_{n}|z^{n}$ that are analytic and univalent in the unit disk $U$. Let $S(¥alpha, ¥beta)$ and $K(¥alpha, ¥beta)$ denote the subclasses of $S$ consisting respectively, of starlike and close-to-convex functions of order $¥alpha(0¥leqq¥alpha

  20. Finite dimensional convexity and optimization

    CERN Document Server

    Florenzano, Monique

    2001-01-01

    The primary aim of this book is to present notions of convex analysis which constitute the basic underlying structure of argumentation in economic theory and which are common to optimization problems encountered in many applications. The intended readers are graduate students, and specialists of mathematical programming whose research fields are applied mathematics and economics. The text consists of a systematic development in eight chapters, with guided exercises containing sometimes significant and useful additional results. The book is appropriate as a class text, or for self-study.

  1. Uniformly convex subsets of the Hilbert space with modulus of convexity of the second order

    OpenAIRE

    Balashov, Maxim V.; Repovš, Dušan,

    2011-01-01

    We prove that in the Hilbert space every uniformly convex set with modulus of convexity of the second order at zero is an intersection of closed balls of fixed radius. We also obtain an estimate of this radius.

  2. Various Expressions for Modulus of Random Convexity

    Institute of Scientific and Technical Information of China (English)

    Xiao Lin ZENG

    2013-01-01

    We first prove various kinds of expressions for modulus of random convexity by using an Lo(F,R)-valued function's intermediate value theorem and the well known Hahn-Banach theorem for almost surely bounded random linear functionals,then establish some basic properties including continuity for modulus of random convexity.In particular,we express the modulus of random convexity of a special random normed module Lo(F,X) derived from a normed space X by the classical modulus of convexity of X.

  3. Research on Operation Strategy for Bundled Wind-thermal Generation Power Systems Based on Two-Stage Optimization Model

    Science.gov (United States)

    Sun, Congcong; Wang, Zhijie; Liu, Sanming; Jiang, Xiuchen; Sheng, Gehao; Liu, Tianyu

    2017-05-01

    Wind power has the advantages of being clean and non-polluting and the development of bundled wind-thermal generation power systems (BWTGSs) is one of the important means to improve wind power accommodation rate and implement “clean alternative” on generation side. A two-stage optimization strategy for BWTGSs considering wind speed forecasting results and load characteristics is proposed. By taking short-term wind speed forecasting results of generation side and load characteristics of demand side into account, a two-stage optimization model for BWTGSs is formulated. By using the environmental benefit index of BWTGSs as the objective function, supply-demand balance and generator operation as the constraints, the first-stage optimization model is developed with the chance-constrained programming theory. By using the operation cost for BWTGSs as the objective function, the second-stage optimization model is developed with the greedy algorithm. The improved PSO algorithm is employed to solve the model and numerical test verifies the effectiveness of the proposed strategy.

  4. DIFFERENTIABILITY OF CONVEX FUNCTIONS ON SUBLINEAR TOPOLOGICAL SPACES AND VARIATIONAL PRINCIPLES IN LOCALLY CONVEX SPACES

    Institute of Scientific and Technical Information of China (English)

    CHENG LIXIN; TENG YANMEI

    2005-01-01

    This paper presents a type of variational principles for real valued w* lower semicon tinuous functions on certain subsets in duals of locally convex spaces, and resolve a problem concerning differentiability of convex functions on general Banach spaces. They are done through discussing differentiability of convex functions on nonlinear topological spaces and convexification of nonconvex functions on topological linear spaces.

  5. A simple view on convex analysis and its applications

    NARCIS (Netherlands)

    J. Brinkhuis (Jan); V. Tikhomirov

    2005-01-01

    textabstractOur aim is to give a simple view on the basics and applications of convex analysis. The essential feature of this account is the systematic use of the possibility to associate to each convex object---such as a convex set, a convex function or a convex extremal problem--- a cone, without

  6. Entropy coherent and entropy convex measures of risk

    NARCIS (Netherlands)

    Laeven, R.J.A.; Stadje, M.

    2013-01-01

    We introduce two subclasses of convex measures of risk, referred to as entropy coherent and entropy convex measures of risk. Entropy coherent and entropy convex measures of risk are special cases of φ-coherent and φ-convex measures of risk. Contrary to the classical use of coherent and convex measur

  7. Efficient Line Searching for Convex Functions

    NARCIS (Netherlands)

    den Boef, E.; den Hertog, D.

    2004-01-01

    In this paper we propose two new line search methods for convex functions. These new methods exploit the convexity property of the function, contrary to existing methods.The worst method is an improved version of the golden section method.For the second method it is proven that after two evaluations

  8. Introduction to Convex and Quasiconvex Analysis

    NARCIS (Netherlands)

    J.B.G. Frenk (Hans); G. Kassay

    2004-01-01

    textabstractIn the first chapter of this book the basic results within convex and quasiconvex analysis are presented. In Section 2 we consider in detail the algebraic and topological properties of convex sets within Rn together with their primal and dual representations. In Section 3 we apply the re

  9. Stochastic Dominance: Convexity and Some Efficiency Tests

    NARCIS (Netherlands)

    A.M. Lizyayev (Andrey)

    2009-01-01

    textabstractThis paper points out the importance of Stochastic Dominance (SD) efficient sets being convex. We review classic convexity and efficient set characterization results on SD efficiency of a given portfolio relative to a diversified set of assets and generalize them in the following

  10. Convex trace functions of several variables

    DEFF Research Database (Denmark)

    Hansen, Frank

    2002-01-01

    We prove that the function (x1,...,xk)¿Tr(f(x1,...,xk)), defined on k-tuples of symmetric matrices of order (n1,...,nk) in the domain of f, is convex for any convex function f of k variables. The matrix f(x1,...,xk) is defined by the functional calculus for functions of several variables, and it ...

  11. Polar DuaLs of Convex Bodies

    Science.gov (United States)

    1990-01-01

    to Convex Bodies, Geometriae Dedicata 2" (1973) 225-248. 10. H. Guggenheimer, "The Analytic Geometry of the Unsymmetric Minkowski Plane," Lecture...Mathematics, Vol. 58, No. 2, 1975. 19. E. Lutwak, "On Cross-Sectional Measures of Polar Reciprocal Convex Bodies," Geometriae Dedicata 5, (1976) 79-80

  12. Differential analysis of matrix convex functions II

    DEFF Research Database (Denmark)

    Hansen, Frank; Tomiyama, Jun

    2009-01-01

    We continue the analysis in [F. Hansen, and J. Tomiyama, Differential analysis of matrix convex functions. Linear Algebra Appl., 420:102--116, 2007] of matrix convex functions of a fixed order defined in a real interval by differential methods as opposed to the characterization in terms of divide...

  13. The Band around a Convex Body

    Science.gov (United States)

    Swanson, David

    2011-01-01

    We give elementary proofs of formulas for the area and perimeter of a planar convex body surrounded by a band of uniform thickness. The primary tool is a integral formula for the perimeter of a convex body which describes the perimeter in terms of the projections of the body onto lines in the plane.

  14. Strictly convex functions on complete Finsler manifolds

    Indian Academy of Sciences (India)

    YOE ITOKAWA; KATSUHIRO SHIOHAMA; BANKTESHWAR TIWARI

    2016-10-01

    The purpose of the present paper is to investigate the influence of strictly convex functions on the metric structures of complete Finsler manifolds. More precisely we discuss the properties of the group of isometries and the exponential maps on a complete Finsler manifold admitting strictly convex functions.

  15. Toric geometry of convex quadrilaterals

    CERN Document Server

    Legendre, Eveline

    2009-01-01

    We provide an explicit resolution of the Abreu equation on convex labeled quadrilaterals. This confirms a conjecture of Donaldson in this particular case and implies a complete classification of the explicit toric K\\"ahler-Einstein and toric Sasaki-Einstein metrics constructed in [6,23,14]. As a byproduct, we obtain a wealth of extremal toric (complex) orbi-surfaces, including K\\"ahler-Einstein ones, and show that for a toric orbi-surface with 4 fixed points of the torus action, the vanishing of the Futaki invariant is a necessary and sufficient condition for the existence of K\\"ahler metric with constant scalar curvature. Our results also provide explicit examples of relative K-unstable toric orbi-surfaces that do not admit extremal metrics.

  16. Convex analysis and global optimization

    CERN Document Server

    Tuy, Hoang

    2016-01-01

    This book presents state-of-the-art results and methodologies in modern global optimization, and has been a staple reference for researchers, engineers, advanced students (also in applied mathematics), and practitioners in various fields of engineering. The second edition has been brought up to date and continues to develop a coherent and rigorous theory of deterministic global optimization, highlighting the essential role of convex analysis. The text has been revised and expanded to meet the needs of research, education, and applications for many years to come. Updates for this new edition include: · Discussion of modern approaches to minimax, fixed point, and equilibrium theorems, and to nonconvex optimization; · Increased focus on dealing more efficiently with ill-posed problems of global optimization, particularly those with hard constraints;

  17. Reconstruction of convex bodies from surface tensors

    DEFF Research Database (Denmark)

    Kousholt, Astrid; Kiderlen, Markus

    The set of all surface tensors of a convex body K (Minkowski tensors derived from the surface area measure of K) determine K up to translation, and hereby, the surface tensors of K contain all information on the shape of K. Here, shape means the equivalence class of all convex bodies...... that are translates of each other. An algorithm for reconstructing an unknown convex body in R 2 from its surface tensors up to a certain rank is presented. Using the reconstruction algorithm, the shape of an unknown convex body can be approximated when only a finite number s of surface tensors are available....... The output of the reconstruction algorithm is a polytope P, where the surface tensors of P and K are identical up to rank s. We establish a stability result based on a generalization of Wirtinger’s inequality that shows that for large s, two convex bodies are close in shape when they have identical surface...

  18. Convex functions, monotone operators and differentiability

    CERN Document Server

    Phelps, Robert R

    1993-01-01

    The improved and expanded second edition contains expositions of some major results which have been obtained in the years since the 1st edition. Theaffirmative answer by Preiss of the decades old question of whether a Banachspace with an equivalent Gateaux differentiable norm is a weak Asplund space. The startlingly simple proof by Simons of Rockafellar's fundamental maximal monotonicity theorem for subdifferentials of convex functions. The exciting new version of the useful Borwein-Preiss smooth variational principle due to Godefroy, Deville and Zizler. The material is accessible to students who have had a course in Functional Analysis; indeed, the first edition has been used in numerous graduate seminars. Starting with convex functions on the line, it leads to interconnected topics in convexity, differentiability and subdifferentiability of convex functions in Banach spaces, generic continuity of monotone operators, geometry of Banach spaces and the Radon-Nikodym property, convex analysis, variational princ...

  19. A Note on Upper Convex Density

    Institute of Scientific and Technical Information of China (English)

    YIN JIAN-DONG; ZHOU ZUO-LING

    2010-01-01

    For a self-similar set E satisfying the open set condition,upper convex density is an important concept for the computation of its Hausdorff measure,and it is well known that the set of relative interior points with upper convex density 1has a full Hausdorff measure.But whether the upper convex densities of E at all the relative interior points are equal to 1? In other words,whether there exists a relative interior point of E such that the upper convex density of E at this point is less than 1?In this paper,the authors construct a self-similar set satisfying the open set condition,which has a relative interior point with upper convex density less than 1.Thereby,the above problem is sufficiently answered.

  20. Generalized convexity, generalized monotonicity recent results

    CERN Document Server

    Martinez-Legaz, Juan-Enrique; Volle, Michel

    1998-01-01

    A function is convex if its epigraph is convex. This geometrical structure has very strong implications in terms of continuity and differentiability. Separation theorems lead to optimality conditions and duality for convex problems. A function is quasiconvex if its lower level sets are convex. Here again, the geo­ metrical structure of the level sets implies some continuity and differentiability properties for quasiconvex functions. Optimality conditions and duality can be derived for optimization problems involving such functions as well. Over a period of about fifty years, quasiconvex and other generalized convex functions have been considered in a variety of fields including economies, man­ agement science, engineering, probability and applied sciences in accordance with the need of particular applications. During the last twenty-five years, an increase of research activities in this field has been witnessed. More recently generalized monotonicity of maps has been studied. It relates to generalized conve...

  1. A plasticity principle of convex quadrilaterals on a complete convex surface of bounded specific curvature

    CERN Document Server

    Zachos, Anastasios

    2010-01-01

    We obtain the plasticity equations for convex quadrilaterals on a complete convex surface with bounded specific curvature and derive a plasticity principle which states that: Given four shortest arcs which meet at the weighted Fermat-Torricelli point P_F and their endpoints form a convex quadrilateral, an increase of the weight that corresponds to a shortest arc causes a decrease to the two weights that correspond to the two neighboring shortest arcs and an increase to the weight that corresponds to the opposite shortest arc. We show a connection between the plasticity of convex quadrilaterals on a complete convex surface with bounded specific curvature with the plasticity of generalized convex quadrilaterals on a manifold which is composed by triangles located on a complete convex surface of bounded specific curvature and triangles located on a two dimensional sphere whose constant Gaussian curvature equals to the infimum or supremum of the specific curvature. Furthermore, we give some cases of geometrizatio...

  2. Neighborhood Chance and Neighborhood Change

    CERN Document Server

    Van de Rijt, Arnout; Macy, Michael

    2008-01-01

    Schelling showed how residential segregation can arise even in a population that is tolerant of diversity. Bruch and Mare challenge this conclusion, claiming that it depends on threshold preference functions that are not empirically plausible. When they increased sensitivity to small changes in ethnic composition, using both linear and empirical preference functions, segregation largely disappeared. They conclude that tipping at the population level (into segregation) depends on tipping at the individual level (a critical point above and below which the individual is indifferent). However, when we replicated their model, we discovered that the results they report for both linear and empirical preferences were incorrect. We found that sensitivity to change can lead to integration in an ethnocentric population that prefers in-group neighbors, but only if ethnic preferences are sufficiently weak relative to chance. When ethnic preferences are sufficiently strong, segregation is greater with linear than with thre...

  3. Preemptive scheduling in a two-stage supply chain to minimize the makespan

    NARCIS (Netherlands)

    Pei, Jun; Fan, Wenjuan; Pardalos, Panos M.; Liu, Xinbao; Goldengorin, Boris; Yang, Shanlin

    2015-01-01

    This paper deals with the problem of preemptive scheduling in a two-stage supply chain framework. The supply chain environment contains two stages: production and transportation. In the production stage jobs are processed on a manufacturer's bounded serial batching machine, preemptions are allowed,

  4. Quasi-convex Functions in Carnot Groups

    Institute of Scientific and Technical Information of China (English)

    Mingbao SUN; Xiaoping YANG

    2007-01-01

    In this paper, the authors introduce the concept of h-quasiconvex functions on Carnot groups G. It is shown that the notions of h-quasiconvex functions and h-convex sets are equivalent and the L∞ estimates of first derivatives of h-quasiconvex functions are given. For a Carnot group G of step two, it is proved that h-quasiconvex functions are locally bounded from above. Furthermore, the authors obtain that h-convex functions are locally Lipschitz continuous and that an h-convex function is twice differentiable almost everywhere.

  5. On the vertex index of convex bodies

    CERN Document Server

    Bezdek, Karoly

    2011-01-01

    We introduce the vertex index, vein(K), of a given centrally symmetric convex body K, which, in a sense, measures how well K can be inscribed into a convex polytope with small number of vertices. This index is closely connected to the illumination parameter of a body, introduced earlier by the first named author, and, thus, related to the famous conjecture in Convex Geometry about covering of a d-dimensional body by 2^d smaller positively homothetic copies. We provide asymptotically sharp estimates (up to a logarithmic term) of this index in the general case. Also, we provide sharp estimates in dimensions 2 and 3.

  6. Noah, Joseph and Convex Hulls

    Science.gov (United States)

    Watkins, N. W.; Chau, Y.; Chapman, S. C.

    2010-12-01

    The idea of describing animal movement by mathematical models based on diffusion and Brownian motion has a long heritage. It has thus been natural to account for those aspects of motion that depart from the Brownian by the use of models incorporating long memory & subdiffusion (“the Joseph effect”) and/or heavy tails & superdiffusion (“the Noah effect”). My own interest in this problem was originally from a geoscience perspective, and was triggered by the need to model time series in space physics where both effects coincide. Subsequently I have been involved in animal foraging studies [e.g. Edwards et al, Nature, 2007]. I will describe some recent work [Watkins et al, PRE, 2009] which studies how fixed-timestep and variable-timestep formulations of anomalous diffusion are related in the presence of heavy tails and long range memory (stable processes versus the CTRW). Quantities for which different scaling relations are predicted between the two approaches are of particular interest, to aid testability. I will also present some of work in progress on the convex hull of anomalously diffusing walkers, inspired by its possible relevance to the idea of home range in biology, and by Randon-Furling et al’s recent analytical results in the Brownian case [PRL, 2009].

  7. Estimating the surface area of non-convex particles from central planar sections

    DEFF Research Database (Denmark)

    Thórisdóttir, Ólöf; H.Rafati, Ali; Kiderlen, Markus

    . In this section plane a modification of the area tangent count method is used. The Morse type estimator generalizes Cruz-Orive's pivotal estimator for convex objects to non-convex objects. The advantages of the Morse type estimator over existing local surface area estimators are illustrated in a simulation study......In this paper, we present a new surface area estimator in local stereology. This new estimator is called the 'Morse type surface area estimator' and is obtained using a two-stage sampling procedure. First a plane section through a fixed reference point of a three-dimensional structure is taken....... The Morse type estimator is well suited for computer assisted confocal microscopy and we demonstrate its practicability in a biological application: the surface area estimation of the nuclei of giant-cell glioblastoma from microscopy images. We also present an interactive software that allows the user...

  8. Revising incompletely specified convex probabilistic belief bases

    CSIR Research Space (South Africa)

    Rens, G

    2016-04-01

    Full Text Available International Workshop on Non-Monotonic Reasoning (NMR), 22-24 April 2016, Cape Town, South Africa Revising Incompletely Specified Convex Probabilistic Belief Bases Gavin Rens CAIR_, University of KwaZulu-Natal, School of Mathematics, Statistics...

  9. Relations between Lipschitz functions and convex functions

    Institute of Scientific and Technical Information of China (English)

    RUAN Yingbin

    2005-01-01

    We discuss the relationship between Lipschitz functions and convex functions.By these relations, we give a sufficient condition for the set of points where Lipschitz functions on a Hilbert space is Frechet differentiable to be residual.

  10. Some integral inequalities for logarithmically convex functions

    Directory of Open Access Journals (Sweden)

    Mevlüt Tunç

    2014-07-01

    Full Text Available The main aim of the present note is to establish new Hadamard like integral inequalities involving log-convex function. We also prove some Hadamard-type inequalities, and applications to the special means are given.

  11. Convex analysis and optimization in Hadamard spaces

    CERN Document Server

    Bacak, Miroslav

    2014-01-01

    This book gives a first systematic account on the subject of convex analysis and optimization in Hadamard spaces. It is primarily aimed at both graduate students and researchers in analysis and optimization.

  12. Linearization functors on real convex sets

    OpenAIRE

    Velasco, Mauricio

    2012-01-01

    We prove that linearizing certain families of polynomial optimization problems leads to new functorial operations in real convex sets. We show that under some conditions these operations can be computed or approximated in ways amenable to efficient computation. These operations are convex analogues of Hom functors, tensor products, symmetric powers, exterior powers and general Schur functors on vector spaces and lead to novel constructions even for polyhedra.

  13. Deformation in locally convex topological linear spaces

    Institute of Scientific and Technical Information of China (English)

    DING; Yanheng

    2004-01-01

    We are concerned with a deformation theory in locally convex topological linear spaces. A special "nice" partition of unity is given. This enables us to construct certain vector fields which are locally Lipschitz continuous with respect to the locally convex topology. The existence, uniqueness and continuous dependence of flows associated to the vector fields are established. Deformations related to strongly indefinite functionals are then obtained. Finally, as applications, we prove some abstract critical point theorems.

  14. The convexity radius of a Riemannian manifold

    OpenAIRE

    Dibble, James

    2014-01-01

    The ratio of convexity radius over injectivity radius may be made arbitrarily small within the class of compact Riemannian manifolds of any fixed dimension at least two. This is proved using Gulliver's method of constructing manifolds with focal points but no conjugate points. The approach is suggested by a characterization of the convexity radius that resembles a classical result of Klingenberg about the injectivity radius.

  15. DEVELOPMENT OF COLD CLIMATE HEAT PUMP USING TWO-STAGE COMPRESSION

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [ORNL; Rice, C Keith [ORNL; Abdelaziz, Omar [ORNL; Shrestha, Som S [ORNL

    2015-01-01

    This paper uses a well-regarded, hardware based heat pump system model to investigate a two-stage economizing cycle for cold climate heat pump applications. The two-stage compression cycle has two variable-speed compressors. The high stage compressor was modelled using a compressor map, and the low stage compressor was experimentally studied using calorimeter testing. A single-stage heat pump system was modelled as the baseline. The system performance predictions are compared between the two-stage and single-stage systems. Special considerations for designing a cold climate heat pump are addressed at both the system and component levels.

  16. DEVELOPMENT OF COLD CLIMATE HEAT PUMP USING TWO-STAGE COMPRESSION

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [ORNL; Rice, C Keith [ORNL; Abdelaziz, Omar [ORNL; Shrestha, Som S [ORNL

    2015-01-01

    This paper uses a well-regarded, hardware based heat pump system model to investigate a two-stage economizing cycle for cold climate heat pump applications. The two-stage compression cycle has two variable-speed compressors. The high stage compressor was modelled using a compressor map, and the low stage compressor was experimentally studied using calorimeter testing. A single-stage heat pump system was modelled as the baseline. The system performance predictions are compared between the two-stage and single-stage systems. Special considerations for designing a cold climate heat pump are addressed at both the system and component levels.

  17. Convexity conditions and normal structure of Banach spaces

    Science.gov (United States)

    Saejung, Satit

    2008-08-01

    We prove that F-convexity, the property dual to P-convexity of Kottman, implies uniform normal structure. Moreover, in the presence of the WORTH property, normal structure follows from a weaker convexity condition than F-convexity. The latter result improves the known fact that every uniformly nonsquare space with the WORTH property has normal structure.

  18. Entropy Coherent and Entropy Convex Measures of Risk

    NARCIS (Netherlands)

    Laeven, R.J.A.; Stadje, M.A.

    2011-01-01

    We introduce two subclasses of convex measures of risk, referred to as entropy coherent and entropy convex measures of risk. We prove that convex, entropy convex and entropy coherent measures of risk emerge as certainty equivalents under variational, homothetic and multiple priors preferences, respe

  19. A further characteristic of abstract convexity structures on topological spaces

    Science.gov (United States)

    Xiang, Shu-Wen; Xia, Shunyou

    2007-11-01

    In this paper, we give a characteristic of abstract convexity structures on topological spaces with selection property. We show that if a convexity structure defined on a topological space has the weak selection property then satisfies H0-condition. Moreover, in a compact convex subset of a topological space with convexity structure, the weak selection property implies the fixed point property.

  20. Exact and Approximate Sizes of Convex Datacubes

    Science.gov (United States)

    Nedjar, Sébastien

    In various approaches, data cubes are pre-computed in order to efficiently answer Olap queries. The notion of data cube has been explored in various ways: iceberg cubes, range cubes, differential cubes or emerging cubes. Previously, we have introduced the concept of convex cube which generalizes all the quoted variants of cubes. More precisely, the convex cube captures all the tuples satisfying a monotone and/or antimonotone constraint combination. This paper is dedicated to a study of the convex cube size. Actually, knowing the size of such a cube even before computing it has various advantages. First of all, free space can be saved for its storage and the data warehouse administration can be improved. However the main interest of this size knowledge is to choose at best the constraints to apply in order to get a workable result. For an aided calibrating of constraints, we propose a sound characterization, based on inclusion-exclusion principle, of the exact size of convex cube as long as an upper bound which can be very quickly yielded. Moreover we adapt the nearly optimal algorithm HyperLogLog in order to provide a very good approximation of the exact size of convex cubes. Our analytical results are confirmed by experiments: the approximated size of convex cubes is really close to their exact size and can be computed quasi immediately.

  1. Numerical simulation of a step-piston type series two-stage pulse tube refrigerator

    Science.gov (United States)

    Zhu, Shaowei; Nogawa, Masafumi; Inoue, Tatsuo

    2007-09-01

    A two-stage pulse tube refrigerator has a great advantage in that there are no moving parts at low temperatures. The problem is low theoretical efficiency. In an ordinary two-stage pulse tube refrigerator, the expansion work of the first stage pulse tube is rather large, but is changed to heat. The theoretical efficiency is lower than that of a Stirling refrigerator. A series two-stage pulse tube refrigerator was introduced for solving this problem. The hot end of the regenerator of the second stage is connected to the hot end of the first stage pulse tube. The expansion work in the first stage pulse tube is part of the input work of the second stage, therefore the efficiency is increased. In a simulation result for a step-piston type two-stage series pulse tube refrigerator, the efficiency is increased by 13.8%.

  2. Theory and calculation of two-stage voltage stabilizer on zener diodes

    Directory of Open Access Journals (Sweden)

    G. S. Veksler

    1966-12-01

    Full Text Available Two-stage stabilizer is compared with one-stage. There have been got formulas, which give the possibility to make an engineering calculation. There is an example of the calculation.

  3. Two-stage fungal pre-treatment for improved biogas production from sisal leaf decortication residues

    National Research Council Canada - National Science Library

    Muthangya, Mutemi; Mshandete, Anthony Manoni; Kivaisi, Amelia Kajumulo

    2009-01-01

    .... Pre-treatment of the residue prior to its anaerobic digestion (AD) was investigated using a two-stage pre-treatment approach with two fungal strains, CCHT-1 and Trichoderma reesei in succession in anaerobic batch bioreactors...

  4. Experiment research on two-stage dry-fed entrained flow coal gasifier

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The process flow and the main devices of a new two-stage dry-fed coal gasification pilot plant with a throughout of 36 t/d are introduced in this paper. For comparison with the traditional one-stage gasifiers, the influences of the coal feed ratio between two stages on the performance of the gasifier are detailedly studied by a series of experiments. The results reveal that the two-stage gasification decreases the temperature of the syngas at the outlet of the gasifier, simplifies the gasification process, and reduces the size of the syngas cooler. Moreover, the cold gas efficiency of the gasifier can be improved by using the two-stage gasification. In our experiments, the efficiency is about 3%-6% higher than the existing one-stage gasifiers.

  5. TWO-STAGE CHARACTER CLASSIFICATION : A COMBINED APPROACH OF CLUSTERING AND SUPPORT VECTOR CLASSIFIERS

    NARCIS (Netherlands)

    Vuurpijl, L.; Schomaker, L.

    2000-01-01

    This paper describes a two-stage classification method for (1) classification of isolated characters and (2) verification of the classification result. Character prototypes are generated using hierarchical clustering. For those prototypes known to sometimes produce wrong classification results, a

  6. A Two-Stage Waste Gasification Reactor for Mars In-Situ Resource Utilization Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to design, build, and test a two-stage waste processing reactor for space applications. Our proposed technology converts waste from space missions into...

  7. A new multi-motor drive system based on two-stage direct power converter

    OpenAIRE

    Kumar, Dinesh

    2011-01-01

    The two-stage AC to AC direct power converter is an alternative matrix converter topology, which offers the benefits of sinusoidal input currents and output voltages, bidirectional power flow and controllable input power factor. The absence of any energy storage devices, such as electrolytic capacitors, has increased the potential lifetime of the converter. In this research work, a new multi-motor drive system based on a two-stage direct power converter has been proposed, with two motors c...

  8. Maximally efficient two-stage screening: Determining intellectual disability in Taiwanese military conscripts

    Directory of Open Access Journals (Sweden)

    Chia-Chang Chien

    2009-01-01

    Full Text Available Chia-Chang Chien1, Shu-Fen Huang1,2,3,4, For-Wey Lung1,2,3,41Department of Psychiatry, Kaohsiung Armed Forces General Hospital, Kaohsiung, Taiwan; 2Graduate Institute of Behavioral Sciences, Kaohsiung Medical University, Kaohsiung, Taiwan; 3Department of Psychiatry, National Defense Medical Center, Taipei, Taiwan; 4Calo Psychiatric Center, Pingtung County, TaiwanObjective: The purpose of this study was to apply a two-stage screening method for the large-scale intelligence screening of military conscripts.Methods: We collected 99 conscripted soldiers whose educational levels were senior high school level or lower to be the participants. Every participant was required to take the Wisconsin Card Sorting Test (WCST and the Wechsler Adult Intelligence Scale-Revised (WAIS-R assessments.Results: Logistic regression analysis showed the conceptual level responses (CLR index of the WCST was the most significant index for determining intellectual disability (ID; FIQ ≤ 84. We used the receiver operating characteristic curve to determine the optimum cut-off point of CLR. The optimum one cut-off point of CLR was 66; the two cut-off points were 49 and 66. Comparing the two-stage window screening with the two-stage positive screening, the area under the curve and the positive predictive value increased. Moreover, the cost of the two-stage window screening decreased by 59%.Conclusion: The two-stage window screening is more accurate and economical than the two-stage positive screening. Our results provide an example for the use of two-stage screening and the possibility of the WCST to replace WAIS-R in large-scale screenings for ID in the future.Keywords: intellectual disability, intelligence screening, two-stage positive screening, Wisconsin Card Sorting Test, Wechsler Adult Intelligence Scale-Revised

  9. Two-Stage Conversion of Land and Marine Biomass for Biogas and Biohydrogen Production

    OpenAIRE

    Nkemka, Valentine

    2012-01-01

    The replacement of fossil fuels by renewable fuels such as biogas and biohydrogen will require efficient and economically competitive process technologies together with new kinds of biomass. A two-stage system for biogas production has several advantages over the widely used one-stage continuous stirred tank reactor (CSTR). However, it has not yet been widely implemented on a large scale. Biohydrogen can be produced in the anaerobic two-stage system. It is considered to be a useful fuel for t...

  10. Research on Chance Discovery:A Survey%Chance Discovery研究综述

    Institute of Scientific and Technical Information of China (English)

    诸世卓; 陈小平

    2004-01-01

    Chance Discovery是国际上新兴的一个研究领域.本文着重从人工智能的角度,分析Chance Discovery的背景和研究现状,并具体介绍几项主要的研究成果,包括Chance的特性和理论抽象、Chance Discovery的技术手段和Chance Discovery的若干应用.

  11. Robust and Reliable Portfolio Optimization Formulation of a Chance Constrained Problem

    Directory of Open Access Journals (Sweden)

    Sengupta Raghu Nandan

    2017-02-01

    Full Text Available We solve a linear chance constrained portfolio optimization problem using Robust Optimization (RO method wherein financial script/asset loss return distributions are considered as extreme valued. The objective function is a convex combination of portfolio’s CVaR and expected value of loss return, subject to a set of randomly perturbed chance constraints with specified probability values. The robust deterministic counterpart of the model takes the form of Second Order Cone Programming (SOCP problem. Results from extensive simulation runs show the efficacy of our proposed models, as it helps the investor to (i utilize extensive simulation studies to draw insights into the effect of randomness in portfolio decision making process, (ii incorporate different risk appetite scenarios to find the optimal solutions for the financial portfolio allocation problem and (iii compare the risk and return profiles of the investments made in both deterministic as well as in uncertain and highly volatile financial markets.

  12. Optimal convex shapes for concave functionals

    CERN Document Server

    Bucur, Dorin; Lamboley, Jimmy

    2011-01-01

    Motivated by a long-standing conjecture of Polya and Szeg\\"o about the Newtonian capacity of convex bodies, we discuss the role of concavity inequalities in shape optimization, and we provide several counterexamples to the Blaschke-concavity of variational functionals, including capacity. We then introduce a new algebraic structure on convex bodies, which allows to obtain global concavity and indecomposability results, and we discuss their application to isoperimetriclike inequalities. As a byproduct of this approach we also obtain a quantitative version of the Kneser-S\\"uss inequality. Finally, for a large class of functionals involving Dirichlet energies and the surface measure, we perform a local analysis of strictly convex portions of the boundary via second order shape derivatives. This allows in particular to exclude the presence of smooth regions with positive Gauss curvature in an optimal shape for Polya-Szeg\\"o problem.

  13. On the convexity of Relativistic Ideal Magnetohydrodynamics

    CERN Document Server

    Ibáñez, José-María; Aloy, Miguel-Ángel; Martí, José-María; Miralles, Juan-Antonio

    2015-01-01

    We analyze the influence of the magnetic field in the convexity properties of the relativistic magnetohydrodynamics system of equations. To this purpose we use the approach of Lax, based on the analysis of the linearly degenerate/genuinely non-linear nature of the characteristic fields. Degenerate and non-degenerate states are discussed separately and the non-relativistic, unmagnetized limits are properly recovered. The characteristic fields corresponding to the material and Alfv\\'en waves are linearly degenerate and, then, not affected by the convexity issue. The analysis of the characteristic fields associated with the magnetosonic waves reveals, however, a dependence of the convexity condition on the magnetic field. The result is expressed in the form of a generalized fundamental derivative written as the sum of two terms. The first one is the generalized fundamental derivative in the case of purely hydrodynamical (relativistic) flow. The second one contains the effects of the magnetic field. The analysis ...

  14. A generalization of the convex Kakeya problem

    KAUST Repository

    Ahn, Heekap

    2012-01-01

    We consider the following geometric alignment problem: Given a set of line segments in the plane, find a convex region of smallest area that contains a translate of each input segment. This can be seen as a generalization of Kakeya\\'s problem of finding a convex region of smallest area such that a needle can be turned through 360 degrees within this region. Our main result is an optimal Θ(n log n)-time algorithm for our geometric alignment problem, when the input is a set of n line segments. We also show that, if the goal is to minimize the perimeter of the region instead of its area, then the optimum placement is when the midpoints of the segments coincide. Finally, we show that for any compact convex figure G, the smallest enclosing disk of G is a smallest-perimeter region containing a translate of any rotated copy of G. © 2012 Springer-Verlag Berlin Heidelberg.

  15. Cost Allocation and Convex Data Envelopment

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Tind, Jørgen

    This paper considers allocation rules. First, we demonstrate that costs allocated by the Aumann-Shapley and the Friedman-Moulin cost allocation rules are easy to determine in practice using convex envelopment of registered cost data and parametric programming. Second, from the linear programming...... such as Data Envelopment Analysis (DEA). The convexity constraint of the BCC model introduces a non-zero slack in the objective function of the multiplier problem and we show that the cost allocation rules discussed in this paper can be used as candidates to allocate this slack value on to the input (or output...... problems involved it becomes clear that the allocation rules, technically speaking, allocate the non-zero value of the dual variable for a convexity constraint on to the output vector. Hence, the allocation rules can also be used to allocate inefficiencies in non-parametric efficiency measurement models...

  16. Non-convex multi-objective optimization

    CERN Document Server

    Pardalos, Panos M; Žilinskas, Julius

    2017-01-01

    Recent results on non-convex multi-objective optimization problems and methods are presented in this book, with particular attention to expensive black-box objective functions. Multi-objective optimization methods facilitate designers, engineers, and researchers to make decisions on appropriate trade-offs between various conflicting goals. A variety of deterministic and stochastic multi-objective optimization methods are developed in this book. Beginning with basic concepts and a review of non-convex single-objective optimization problems; this book moves on to cover multi-objective branch and bound algorithms, worst-case optimal algorithms (for Lipschitz functions and bi-objective problems), statistical models based algorithms, and probabilistic branch and bound approach. Detailed descriptions of new algorithms for non-convex multi-objective optimization, their theoretical substantiation, and examples for practical applications to the cell formation problem in manufacturing engineering, the process design in...

  17. Method of oxygen-enriched two-stage underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Liu Hongtao; Chen Feng; Pan Xia; Yao Kai; Liu Shuqin

    2011-01-01

    Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times. A model test using the oxygen-enriched two-stage coal gasification method was carried out. The composition of the gas produced, the time ratio of the two stages, and the role of the temperature field were analysed. The results show that oxygen-enriched two-stage gasification shortens the time of the first stage and prolongs the time of the second stage. Feed oxygen concentrations of 30%,35%, 40%, 45%, 60%, or 80% gave time ratios (first stage to second stage) of 1:0.12, 1:0.21, 1:0.51, 1:0.64,1:0.90, and 1:4.0 respectively. Cooling rates of the temperature field after steam injection decreased with time from about 19.1-27.4 ℃/min to 2.3-6.8 ℃/min. But this rate increased with increasing oxygen concentrations in the first stage. The caloric value of the syngas improves with increased oxygen concentration in the first stage. Injection of 80% oxygen-enriched air gave gas with the highest caloric value and also gave the longest production time. The caloric value of the gas obtained from the oxygenenriched two-stage gasification method lies in the range from 5.31 MJ/Nm3 to 10.54 MJ/Nm3.

  18. High magnetostriction parameters for low-temperature sintered cobalt ferrite obtained by two-stage sintering

    Energy Technology Data Exchange (ETDEWEB)

    Khaja Mohaideen, K.; Joy, P.A., E-mail: pa.joy@ncl.res.in

    2014-12-15

    From the studies on the magnetostriction characteristics of two-stage sintered polycrystalline CoFe{sub 2}O{sub 4} made from nanocrystalline powders, it is found that two-stage sintering at low temperatures is very effective for enhancing the density and for attaining higher magnetostriction coefficient. Magnetostriction coefficient and strain derivative are further enhanced by magnetic field annealing and relatively larger enhancement in the magnetostriction parameters is obtained for the samples sintered at lower temperatures, after magnetic annealing, despite the fact that samples sintered at higher temperatures show larger magnetostriction coefficients before annealing. A high magnetostriction coefficient of ∼380 ppm is obtained after field annealing for the sample sintered at 1100 °C, below a magnetic field of 400 kA/m, which is the highest value so far reported at low magnetic fields for sintered polycrystalline cobalt ferrite. - Highlights: • Effect of two-stage sintering on the magnetostriction characteristics of CoFe{sub 2}O{sub 4} is studied. • Two-stage sintering is very effective for enhancing the density and the magnetostriction parameters. • Higher magnetostriction for samples sintered at low temperatures and after magnetic field annealing. • Highest reported magnetostriction of 380 ppm at low fields after two-stage, low-temperature sintering.

  19. 13 K thermally coupled two-stage Stirling-type pulse tube refrigerator

    Institute of Scientific and Technical Information of China (English)

    TANG Ke; CHEN Guobang; THUMMES Günter

    2005-01-01

    Stirling-type pulse tube refrigerators have attracted academic and commercial interest in recent years due to their more compact configuration and higher efficiency than those of G-M type pulse tube refrigerators. In order to achieve a no-load cooling temperature below 20 K, a thermally coupled two-stage Stirling-type pulse tube refrigerator has been built. The thermally coupled arrangement was expected to minimize the interference between the two stages and to simplify the adjustment and optimization of the phase shifters. A no-load cooling temperature of 14.97 K has been realized with the two-stage cooler driven by one linear compressor of 200 W electric input. When the two stages are driven by two compressors respectively, with total electric input of 400 W, the prototype has attained a no-load cooling temperature of 12.96 K, which is the lowest temperature ever reported with two-stage Stirling-type pulse tube refrigerators.

  20. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Ladan Jamshidy

    2016-01-01

    Full Text Available Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL regions by a stereomicroscope using a standard method. Results. The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion. The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

  1. Non-convex onion peeling using a shape hull algorithm

    OpenAIRE

    Fadili, Jalal M.; Melkemi, Mahmoud; Elmoataz, Abderrahim

    2004-01-01

    International audience; The convex onion-peeling of a set of points is the organization of these points into a sequence of interpolating convex polygons. This method is adequate to detect the shape of the “center” of a set of points when this shape is convex. However it reveals inadequate to detect non-convex shapes. Alternatively, we propose an extension of the convex onion-peeling method. It consists in representing a set of points with a sequence of non-convex polylines which are computed ...

  2. Uniform convexity and the splitting problem for selections

    CERN Document Server

    Balashov, Maxim V; 10.1016/j.jmaa.2009.06.045

    2009-01-01

    We continue to investigate cases when the Repov\\v{s}-Semenov splitting problem for selections has an affirmative solution for continuous set-valued mappings. We consider the situation in infinite-dimensional uniformly convex Banach spaces. We use the notion of Polyak of uniform convexity and modulus of uniform convexity for arbitrary convex sets (not necessary balls). We study general geometric properties of uniformly convex sets. We also obtain an affirmative solution of the splitting problem for selections of certain set-valued mappings with uniformly convex images.

  3. Reconstruction of convex bodies from surface tensors

    DEFF Research Database (Denmark)

    Kousholt, Astrid; Kiderlen, Markus

    2016-01-01

    We present two algorithms for reconstruction of the shape of convex bodies in the two-dimensional Euclidean space. The first reconstruction algorithm requires knowledge of the exact surface tensors of a convex body up to rank s for some natural number s. When only measurements subject to noise...... of surface tensors are available for reconstruction, we recommend to use certain values of the surface tensors, namely harmonic intrinsic volumes instead of the surface tensors evaluated at the standard basis. The second algorithm we present is based on harmonic intrinsic volumes and allows for noisy...

  4. Reconstruction of convex bodies from surface tensors

    DEFF Research Database (Denmark)

    Kousholt, Astrid; Kiderlen, Markus

    We present two algorithms for reconstruction of the shape of convex bodies in the two-dimensional Euclidean space. The first reconstruction algorithm requires knowledge of the exact surface tensors of a convex body up to rank s for some natural number s. The second algorithm uses harmonic intrinsic...... volumes which are certain values of the surface tensors and allows for noisy measurements. From a generalized version of Wirtinger's inequality, we derive stability results that are utilized to ensure consistency of both reconstruction procedures. Consistency of the reconstruction procedure based...

  5. Cost Allocation and Convex Data Envelopment

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Tind, Jørgen

    problems involved it becomes clear that the allocation rules, technically speaking, allocate the non-zero value of the dual variable for a convexity constraint on to the output vector. Hence, the allocation rules can also be used to allocate inefficiencies in non-parametric efficiency measurement models...... such as Data Envelopment Analysis (DEA). The convexity constraint of the BCC model introduces a non-zero slack in the objective function of the multiplier problem and we show that the cost allocation rules discussed in this paper can be used as candidates to allocate this slack value on to the input (or output...

  6. Convex functions and the rolling circle criterion

    OpenAIRE

    1995-01-01

    Given 0≤R1≤R2≤∞, CVG(R1,R2) denotes the class of normalized convex functions f in the unit disc U, for which ∂f(U) satisfies a Blaschke Rolling Circles Criterion with radii R1 and R2. Necessary and sufficient conditions for R1=R2, growth and distortion theorems for CVG(R1,R2) and rotation theorem for the class of convex functions of bounded type, are found.

  7. A Complete Characterization of the Gap between Convexity and SOS-Convexity

    CERN Document Server

    Ahmadi, Amir Ali

    2011-01-01

    Our first contribution in this paper is to prove that three natural sum of squares (sos) based sufficient conditions for convexity of polynomials via the definition of convexity, its first order characterization, and its second order characterization are equivalent. These three equivalent algebraic conditions, henceforth referred to as sos-convexity, can be checked by semidefinite programming whereas deciding convexity is NP-hard. If we denote the set of convex and sos-convex polynomials in $n$ variables of degree $d$ with $\\tilde{C}_{n,d}$ and $\\tilde{\\Sigma C}_{n,d}$ respectively, then our main contribution is to prove that $\\tilde{C}_{n,d}=\\tilde{\\Sigma C}_{n,d}$ if and only if $n=1$ or $d=2$ or $(n,d)=(2,4)$. We also present a complete characterization for forms (homogeneous polynomials) except for the case $(n,d)=(3,4)$ which is joint work with G. Blekherman and is to be published elsewhere. Our result states that the set $C_{n,d}$ of convex forms in $n$ variables of degree $d$ equals the set $\\Sigma C_{...

  8. Design and construction of the X-2 two-stage free piston driven expansion tube

    Science.gov (United States)

    Doolan, Con

    1995-01-01

    This report outlines the design and construction of the X-2 two-stage free piston driven expansion tube. The project has completed its construction phase and the facility has been installed in the new impulsive research laboratory where commissioning is about to take place. The X-2 uses a unique, two-stage driver design which allows a more compact and lower overall cost free piston compressor. The new facility has been constructed in order to examine the performance envelope of the two-stage driver and how well it couple to sub-orbital and super-orbital expansion tubes. Data obtained from these experiments will be used for the design of a much larger facility, X-3, utilizing the same free piston driver concept.

  9. Analysis of performance and optimum configuration of two-stage semiconductor thermoelectric module

    Institute of Scientific and Technical Information of China (English)

    Li Kai-Zhen; Liang Rui-Sheng; Wei Zheng-Jun

    2008-01-01

    In this paper, the theoretical analysis and simulating calculation were conducted for a basic two-stage semiconductor thermoelectric module, which contains one thermocouple in the second stage and several thermocouples in the first stage. The study focused on the configuration of the two-stage semiconductor thermoelectric cooler, especially investigating the influences of some parameters, such as the current I1 of the first stage, the area A1 of every thermocouple and the number n of thermocouples in the first stage, on the cooling performance of the module. The obtained results of analysis indicate that changing the current I1 of the first stage, the area A1 of thcrmocouples and the number n of thermocouples in the first stage can improve the cooling performance of the module. These results can be used to optimize the configuration of the two-stage semiconductor thermoelectric module and provide guides for the design and application of thermoelectric cooler.

  10. Effects of earthworm casts and zeolite on the two-stage composting of green waste.

    Science.gov (United States)

    Zhang, Lu; Sun, Xiangyang

    2015-05-01

    Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21days with the optimized two-stage composting method rather than in the 90-270days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL.

  11. Two-Stage Revision Anterior Cruciate Ligament Reconstruction: Bone Grafting Technique Using an Allograft Bone Matrix.

    Science.gov (United States)

    Chahla, Jorge; Dean, Chase S; Cram, Tyler R; Civitarese, David; O'Brien, Luke; Moulton, Samuel G; LaPrade, Robert F

    2016-02-01

    Outcomes of primary anterior cruciate ligament (ACL) reconstruction have been reported to be far superior to those of revision reconstruction. However, as the incidence of ACL reconstruction is rapidly increasing, so is the number of failures. The subsequent need for revision ACL reconstruction is estimated to occur in up to 13,000 patients each year in the United States. Revision ACL reconstruction can be performed in one or two stages. A two-stage approach is recommended in cases of improper placement of the original tunnels or in cases of unacceptable tunnel enlargement. The aim of this study was to describe the technique for allograft ACL tunnel bone grafting in patients requiring a two-stage revision ACL reconstruction.

  12. The CSS and The Two-Staged Methods for Parameter Estimation in SARFIMA Models

    Directory of Open Access Journals (Sweden)

    Erol Egrioglu

    2011-01-01

    Full Text Available Seasonal Autoregressive Fractionally Integrated Moving Average (SARFIMA models are used in the analysis of seasonal long memory-dependent time series. Two methods, which are conditional sum of squares (CSS and two-staged methods introduced by Hosking (1984, are proposed to estimate the parameters of SARFIMA models. However, no simulation study has been conducted in the literature. Therefore, it is not known how these methods behave under different parameter settings and sample sizes in SARFIMA models. The aim of this study is to show the behavior of these methods by a simulation study. According to results of the simulation, advantages and disadvantages of both methods under different parameter settings and sample sizes are discussed by comparing the root mean square error (RMSE obtained by the CSS and two-staged methods. As a result of the comparison, it is seen that CSS method produces better results than those obtained from the two-staged method.

  13. A two-stage subsurface vertical flow constructed wetland for high-rate nitrogen removal.

    Science.gov (United States)

    Langergraber, Guenter; Leroch, Klaus; Pressl, Alexander; Rohrhofer, Roland; Haberl, Raimund

    2008-01-01

    By using a two-stage constructed wetland (CW) system operated with an organic load of 40 gCOD.m(-2).d(-1) (2 m2 per person equivalent) average nitrogen removal efficiencies of about 50% and average nitrogen elimination rates of 980 g N.m(-2).yr(-1) could be achieved. Two vertical flow beds with intermittent loading have been operated in series. The first stage uses sand with a grain size of 2-3.2 mm for the main layer and has a drainage layer that is impounded; the second stage sand with a grain size of 0.06-4 mm and a drainage layer with free drainage. The high nitrogen removal can be achieved without recirculation thus it is possible to operate the two-stage CW system without energy input. The paper shows performance data for the two-stage CW system regarding removal of organic matter and nitrogen for the two year operating period of the system. Additionally, its efficiency is compared with the efficiency of a single-stage vertical flow CW system designed and operated according to the Austrian design standards with 4 m2 per person equivalent. The comparison shows that a higher effluent quality could be reached with the two-stage system although the two-stage CW system is operated with the double organic load or half the specific surface area requirement, respectively. Another advantage is that the specific investment costs of the two-stage CW system amount to 1,200 EUR per person (without mechanical pre-treatment) and are only about 60% of the specific investment costs of the singe-stage CW system. IWA Publishing 2008.

  14. Mental Health May Affect Chances Against Cancer

    Science.gov (United States)

    ... page: https://medlineplus.gov/news/fullstory_163241.html Mental Health May Affect Chances Against Cancer Early research suggests ... Our findings contribute to the evidence that poor mental health might have some predictive capacity for certain physical ...

  15. The early history of chance in evolution.

    Science.gov (United States)

    Pence, Charles H

    2015-04-01

    Work throughout the history and philosophy of biology frequently employs 'chance', 'unpredictability', 'probability', and many similar terms. One common way of understanding how these concepts were introduced in evolution focuses on two central issues: the first use of statistical methods in evolution (Galton), and the first use of the concept of "objective chance" in evolution (Wright). I argue that while this approach has merit, it fails to fully capture interesting philosophical reflections on the role of chance expounded by two of Galton's students, Karl Pearson and W.F.R. Weldon. Considering a question more familiar from contemporary philosophy of biology--the relationship between our statistical theories of evolution and the processes in the world those theories describe--is, I claim, a more fruitful way to approach both these two historical actors and the broader development of chance in evolution.

  16. Childhood Asthma: A Chance to HEAL

    Science.gov (United States)

    ... Home Current Issue Past Issues Special Section Childhood Asthma: A Chance to HEAL Past Issues / Fall 2007 ... a peak flow meter. Photo courtesy of MCAN Asthma, a reality of daily life for more than ...

  17. Foundations of complex analysis in non locally convex spaces function theory without convexity condition

    CERN Document Server

    Bayoumi, A

    2003-01-01

    All the existing books in Infinite Dimensional Complex Analysis focus on the problems of locally convex spaces. However, the theory without convexity condition is covered for the first time in this book. This shows that we are really working with a new, important and interesting field. Theory of functions and nonlinear analysis problems are widespread in the mathematical modeling of real world systems in a very broad range of applications. During the past three decades many new results from the author have helped to solve multiextreme problems arising from important situations, non-convex and

  18. Methane production from sweet sorghum residues via a two-stage process

    Energy Technology Data Exchange (ETDEWEB)

    Stamatelatou, K.; Dravillas, K.; Lyberatos, G. [University of Patras (Greece). Department of Chemical Engineering, Laboratory of Biochemical Engineering and Environmental Technology

    2003-07-01

    The start-up of a two-stage reactor configuration for the anaerobic digestion of sweet sorghum residues was evaluated. The sweet sorghum residues were a waste stream originating from the alcoholic fermentation of sweet sorghum and the subsequent distillation step. This waste stream contained high concentration of solid matter (9% TS) and thus could be characterized as a semi-solid, not easily biodegradable wastewater with high COD (115 g/l). The application of the proposed two-stage configuration (consisting of one thermophilic hydrolyser and one mesophilic methaniser) achieved a methane production of 16 l/l wastewater under a hydraulic retention time of 19 d. (author)

  19. Two Stage Fully Differential Sample and Hold Circuit Using .18µm Technology

    Directory of Open Access Journals (Sweden)

    Dharmendra Dongardiye

    2014-05-01

    Full Text Available This paper presents a well-established Fully Differential sample & hold circuitry, implemented in 180-nm CMOS technology. In this two stage method the first stage give us very high gain and second stage gives large voltage swing. The proposed opamp provides 149MHz unity-gain bandwidth , 78 degree phase margin and a differential peak to peak output swing more than 2.4v. using the improved fully differential two stage operational amplifier of 76.7dB gain. Although the sample and hold circuit meets the requirements of SNR specifications.

  20. One-stage and two-stage penile buccal mucosa urethroplasty

    Directory of Open Access Journals (Sweden)

    G. Barbagli

    2016-03-01

    Full Text Available The paper provides the reader with the detailed description of current techniques of one-stage and two-stage penile buccal mucosa urethroplasty. The paper provides the reader with the preoperative patient evaluation paying attention to the use of diagnostic tools. The one-stage penile urethroplasty using buccal mucosa graft with the application of glue is preliminary showed and discussed. Two-stage penile urethroplasty is then reported. A detailed description of first-stage urethroplasty according Johanson technique is reported. A second-stage urethroplasty using buccal mucosa graft and glue is presented. Finally postoperative course and follow-up are addressed.

  1. Development of a linear compressor for two-stage pulse tube cryocoolers

    Institute of Scientific and Technical Information of China (English)

    Peng-da YAN; Wei-li GAO; Guo-bang CHEN

    2009-01-01

    A valveless linear compressor was built up to drive a self-made two-stage pulse tube cryocooler. With a designed maximum swept volume of 60 cm~3, the compressor can provide the cryocooler with a pressure volume (PV) power of 400 W.Preliminary measurements of the compressor indicated that both an efficiency of 35%~55% and a pressure ratio of 1.3~1.4 could be obtained. The two-stage pulse tube cryocooler driven by this compressor achieved the lowest temperature of 14.2 K.

  2. Terephthalic acid wastewater treatment by using two-stage aerobic process

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Based on the tests between anoxic and aerobic process, the two-stage aerobic process with a biological selector was chosen to treat terephthalic acid wastewater (PTA). By adopting the two- stage aerobic process, the CODCr in PTA wastewater could be reduced from 4000-6000 mg/L to below 100 mg/L; the COD loading in the first aerobic tank could reach 7.0-8.0 kgCODCr/(m3.d) and that of the second stage was from 0.2 to 0.4 kgCODCr/(m3.d). Further researches on the kinetics of substrate degradation were carried out.

  3. First Law Analysis of a Two-stage Ejector-vapor Compression Refrigeration Cycle working with R404A

    National Research Council Canada - National Science Library

    Feiza Memet; Daniela-Elena Mitu

    2011-01-01

    The traditional two-stage vapor compression refrigeration cycle might be replaced by a two-stage ejector-vapor compression refrigeration cycle if it is aimed the decrease of irreversibility during expansion...

  4. Tropicalized Lambda Lengths, Measured Laminations and Convexity

    DEFF Research Database (Denmark)

    C. Penner, R.

    cell decomposition of a surface is discovered in the limit. Finally, the tropical analogue of the convex hull construction in Minkowski space is formulated as an explicit algorithm that serially simplifies a triangulation with respect to a fixed lamination and has its own independent applications....

  5. Some Characterizations of Convex Interval Games

    NARCIS (Netherlands)

    Brânzei, R.; Tijs, S.H.; Alparslan-Gok, S.Z.

    2008-01-01

    This paper focuses on new characterizations of convex interval games using the notions of exactness and superadditivity. We also relate big boss interval games with concave interval games and obtain characterizations of big boss interval games in terms of exactness and subadditivity.

  6. A generalization of the convex Kakeya problem

    KAUST Repository

    Ahn, Heekap

    2013-09-19

    Given a set of line segments in the plane, not necessarily finite, what is a convex region of smallest area that contains a translate of each input segment? This question can be seen as a generalization of Kakeya\\'s problem of finding a convex region of smallest area such that a needle can be rotated through 360 degrees within this region. We show that there is always an optimal region that is a triangle, and we give an optimal Θ(nlogn)-time algorithm to compute such a triangle for a given set of n segments. We also show that, if the goal is to minimize the perimeter of the region instead of its area, then placing the segments with their midpoint at the origin and taking their convex hull results in an optimal solution. Finally, we show that for any compact convex figure G, the smallest enclosing disk of G is a smallest-perimeter region containing a translate of every rotated copy of G. © 2013 Springer Science+Business Media New York.

  7. Robust Utility Maximization Under Convex Portfolio Constraints

    Energy Technology Data Exchange (ETDEWEB)

    Matoussi, Anis, E-mail: anis.matoussi@univ-lemans.fr [Université du Maine, Risk and Insurance institut of Le Mans Laboratoire Manceau de Mathématiques (France); Mezghani, Hanen, E-mail: hanen.mezghani@lamsin.rnu.tn; Mnif, Mohamed, E-mail: mohamed.mnif@enit.rnu.tn [University of Tunis El Manar, Laboratoire de Modélisation Mathématique et Numérique dans les Sciences de l’Ingénieur, ENIT (Tunisia)

    2015-04-15

    We study a robust maximization problem from terminal wealth and consumption under a convex constraints on the portfolio. We state the existence and the uniqueness of the consumption–investment strategy by studying the associated quadratic backward stochastic differential equation. We characterize the optimal control by using the duality method and deriving a dynamic maximum principle.

  8. Tropicalized Lambda Lengths, Measured Laminations and Convexity

    DEFF Research Database (Denmark)

    C. Penner, R.

    This work uncovers the tropical analogue for measured laminations of the convex hull construction of decorated Teichmueller theory, namely, it is a study in coordinates of geometric degeneration to a point of Thurston's boundary for Teichmueller space. This may offer a paradigm for the extension...

  9. On fixed points and uniformly convex spaces

    OpenAIRE

    Gelander, Tsachik

    2008-01-01

    The purpose of this note is to present two elementary, but useful, facts concerning actions on uniformly convex spaces. We demonstrate how each of them can be used in an alternative proof of the triviality of the first $L_p$-cohomology of higher rank simple Lie groups, proved in [BFGM].

  10. Dynamic Matchings in Convex Bipartite Graphs

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Georgiadis, Loukas; Hansen, Kristoffer Arnsfelt

    2007-01-01

    We consider the problem of maintaining a maximum matching in a convex bipartite graph G = (V,E) under a set of update operations which includes insertions and deletions of vertices and edges. It is not hard to show that it is impossible to maintain an explicit representation of a maximum matching...

  11. Minimizing convex functions by continuous descent methods

    Directory of Open Access Journals (Sweden)

    Sergiu Aizicovici

    2010-01-01

    Full Text Available We study continuous descent methods for minimizing convex functions, defined on general Banach spaces, which are associated with an appropriate complete metric space of vector fields. We show that there exists an everywhere dense open set in this space of vector fields such that each of its elements generates strongly convergent trajectories.

  12. Differential analysis of matrix convex functions

    DEFF Research Database (Denmark)

    Hansen, Frank; Tomiyama, Jun

    2007-01-01

    We analyze matrix convex functions of a fixed order defined in a real interval by differential methods as opposed to the characterization in terms of divided differences given by Kraus [F. Kraus, Über konvekse Matrixfunktionen, Math. Z. 41 (1936) 18-42]. We obtain for each order conditions for ma...

  13. Estimates for oscillatory integrals with convex phase

    Energy Technology Data Exchange (ETDEWEB)

    Chakhkiev, M A [Moscow State Social University, Moscow (Russian Federation)

    2006-02-28

    We consider methods for estimating one-dimensional oscillatory integrals with convex phase and amplitudes of bounded variation or Lipschitz class amplitudes. In particular, we improve the estimate for the Piercey integral with near-caustic parameter values, and also consider estimation methods for n-dimensional oscillatory integrals.

  14. Some Characterizations of Convex Interval Games

    NARCIS (Netherlands)

    Brânzei, R.; Tijs, S.H.; Alparslan-Gok, S.Z.

    2008-01-01

    This paper focuses on new characterizations of convex interval games using the notions of exactness and superadditivity. We also relate big boss interval games with concave interval games and obtain characterizations of big boss interval games in terms of exactness and subadditivity.

  15. Directional Convexity and Finite Optimality Conditions.

    Science.gov (United States)

    1984-03-01

    system, Necessary Conditions for optimality. Work Unit Number 5 (Optimization and Large Scale Systems) *Istituto di Matematica Applicata, Universita...that R(T) is convex would then imply x(u,T) e int R(T). Cletituto di Matematica Applicata, Universita di Padova, 35100 ITALY. Sponsored by the United

  16. Convex bodies of states and maps

    Science.gov (United States)

    Grabowski, Janusz; Ibort, Alberto; Kuś, Marek; Marmo, Giuseppe

    2013-10-01

    We give a general solution to the question of when the convex hulls of orbits of quantum states on a finite-dimensional Hilbert space under unitary actions of a compact group have a non-empty interior in the surrounding space of all density operators. The same approach can be applied to study convex combinations of quantum channels. The importance of both problems stems from the fact that, usually, only sets with non-vanishing volumes in the embedding spaces of all states or channels are of practical importance. For the group of local transformations on a bipartite system we characterize maximally entangled states by the properties of a convex hull of orbits through them. We also compare two partial characteristics of convex bodies in terms of the largest balls and maximum volume ellipsoids contained in them and show that, in general, they do not coincide. Separable states, mixed-unitary channels and k-entangled states are also considered as examples of our techniques.

  17. Convexity properties of Hamiltonian group actions

    CERN Document Server

    Guillemin, Victor

    2005-01-01

    This is a monograph on convexity properties of moment mappings in symplectic geometry. The fundamental result in this subject is the Kirwan convexity theorem, which describes the image of a moment map in terms of linear inequalities. This theorem bears a close relationship to perplexing old puzzles from linear algebra, such as the Horn problem on sums of Hermitian matrices, on which considerable progress has been made in recent years following a breakthrough by Klyachko. The book presents a simple local model for the moment polytope, valid in the "generic&rdquo case, and an elementary Morse-theoretic argument deriving the Klyachko inequalities and some of their generalizations. It reviews various infinite-dimensional manifestations of moment convexity, such as the Kostant type theorems for orbits of a loop group (due to Atiyah and Pressley) or a symplectomorphism group (due to Bloch, Flaschka and Ratiu). Finally, it gives an account of a new convexity theorem for moment map images of orbits of a Borel sub...

  18. Subset Selection by Local Convex Approximation

    DEFF Research Database (Denmark)

    Øjelund, Henrik; Sadegh, Payman; Madsen, Henrik

    1999-01-01

    least squares criterion. We propose an optimization technique for the posed probelm based on a modified version of the Newton-Raphson iterations, combined with a backward elimination type algorithm. THe Newton-Raphson modification concerns iterative approximations to the non-convex cost function...

  19. Conference on Convex Analysis and Global Optimization

    CERN Document Server

    Pardalos, Panos

    2001-01-01

    There has been much recent progress in global optimization algo­ rithms for nonconvex continuous and discrete problems from both a theoretical and a practical perspective. Convex analysis plays a fun­ damental role in the analysis and development of global optimization algorithms. This is due essentially to the fact that virtually all noncon­ vex optimization problems can be described using differences of convex functions and differences of convex sets. A conference on Convex Analysis and Global Optimization was held during June 5 -9, 2000 at Pythagorion, Samos, Greece. The conference was honoring the memory of C. Caratheodory (1873-1950) and was en­ dorsed by the Mathematical Programming Society (MPS) and by the Society for Industrial and Applied Mathematics (SIAM) Activity Group in Optimization. The conference was sponsored by the European Union (through the EPEAEK program), the Department of Mathematics of the Aegean University and the Center for Applied Optimization of the University of Florida, by th...

  20. Overcoming the bottlenecks of anaerobic digestion of olive mill solid waste by two-stage fermentation.

    Science.gov (United States)

    Stoyanova, Elitza; Lundaa, Tserennyam; Bochmann, Günther; Fuchs, Werner

    2017-02-01

    Two-stage anaerobic digestion (AD) of two-phase olive mill solid waste (OMSW) was applied for reducing the inhibiting factors by optimizing the acidification stage. Single-stage AD and co-fermentation with chicken manure were conducted coinstantaneous for direct comparison. Degradation of the polyphenols up to 61% was observed during the methanogenic stage. Nevertheless the concentration of phenolic substances was still high; the two-stage fermentation remained stable at OLR 1.5 kgVS/m³day. The buffer capacity of the system was twice as high, compared to the one-stage fermentation, without additives. The two-stage AD was a combined process - thermophilic first stage and mesophilic second stage, which pointed out to be the most profitable for AD of OMSW for the reduced hydraulic retention time (HRT) from 230 to 150 days, and three times faster than the single-stage and the co-fermentation start-up of the fermentation. The optimal HRT and incubation temperature for the first stage were determined to four days and 55°C. The performance of the two-stage AD concerning the stability of the process was followed by the co-digestion of OMSW with chicken manure as a nitrogen-rich co-substrate, which makes them viable options for waste disposal with concomitant energy recovery.

  1. The Design, Construction and Operation of a 75 kW Two-Stage Gasifier

    DEFF Research Database (Denmark)

    Henriksen, Ulrik Birk; Ahrenfeldt, Jesper; Jensen, Torben Kvist

    2003-01-01

    The Two-Stage Gasifier was operated for several weeks (465 hours) and of these 190 hours continuously. The gasifier is operated automatically unattended day and night, and only small adjustments of the feeding rate were necessary once or twice a day. The operation was successful, and the output a...... of the reactor had to be constructed in some other material....

  2. Treatment of corn ethanol distillery wastewater using two-stage anaerobic digestion.

    Science.gov (United States)

    Ráduly, B; Gyenge, L; Szilveszter, Sz; Kedves, A; Crognale, S

    In this study the mesophilic two-stage anaerobic digestion (AD) of corn bioethanol distillery wastewater is investigated in laboratory-scale reactors. Two-stage AD technology separates the different sub-processes of the AD in two distinct reactors, enabling the use of optimal conditions for the different microbial consortia involved in the different process phases, and thus allowing for higher applicable organic loading rates (OLRs), shorter hydraulic retention times (HRTs) and better conversion rates of the organic matter, as well as higher methane content of the produced biogas. In our experiments the reactors have been operated in semi-continuous phase-separated mode. A specific methane production of 1,092 mL/(L·d) has been reached at an OLR of 6.5 g TCOD/(L·d) (TCOD: total chemical oxygen demand) and a total HRT of 21 days (5.7 days in the first-stage, and 15.3 days in the second-stage reactor). Nonetheless the methane concentration in the second-stage reactor was very high (78.9%); the two-stage AD outperformed the reference single-stage AD (conducted at the same reactor loading rate and retention time) by only a small margin in terms of volumetric methane production rate. This makes questionable whether the higher methane content of the biogas counterbalances the added complexity of the two-stage digestion.

  3. A two-stage ethanol-based biodiesel production in a packed bed reactor

    DEFF Research Database (Denmark)

    Xu, Yuan; Nordblad, Mathias; Woodley, John

    2012-01-01

    A two-stage enzymatic process for producing fatty acid ethyl ester (FAEE) in a packed bed reactor is reported. The process uses an experimental immobilized lipase (NS 88001) and Novozym 435 to catalyze transesterification (first stage) and esterification (second stage), respectively. Both stages...

  4. Two-Stage MAS Technique for Analysis of DRA Elements and Arrays on Finite Ground Planes

    DEFF Research Database (Denmark)

    Larsen, Niels Vesterdal; Breinbjerg, Olav

    2007-01-01

    A two-stage Method of Auxiliary Sources (MAS) technique is proposed for analysis of dielectric resonator antenna (DRA) elements and arrays on finite ground planes (FGPs). The problem is solved by first analysing the DRA on an infinite ground plane (IGP) and then using this solution to model the FGP...... problem....

  5. Use a Log Splitter to Demonstrate Two-Stage Hydraulic Pump

    Science.gov (United States)

    Dell, Timothy W.

    2012-01-01

    The two-stage hydraulic pump is commonly used in many high school and college courses to demonstrate hydraulic systems. Unfortunately, many textbooks do not provide a good explanation of how the technology works. Another challenge that instructors run into with teaching hydraulic systems is the cost of procuring an expensive real-world machine…

  6. Two-Stage Sampling Procedures for Comparing Means When Population Distributions Are Non-Normal.

    Science.gov (United States)

    Luh, Wei-Ming; Olejnik, Stephen

    Two-stage sampling procedures for comparing two population means when variances are heterogeneous have been developed by D. G. Chapman (1950) and B. K. Ghosh (1975). Both procedures assume sampling from populations that are normally distributed. The present study reports on the effect that sampling from non-normal distributions has on Type I error…

  7. Some design aspects of a two-stage rail-to-rail CMOS op amp

    NARCIS (Netherlands)

    Gierkink, S.L.J.; Holzmann, Peter J.; Wiegerink, R.J.; Wassenaar, R.F.

    1999-01-01

    A two-stage low-voltage CMOS op amp with rail-to-rail input and output voltage ranges is presented. The circuit uses complementary differential input pairs to achieve the rail-to-rail common-mode input voltage range. The differential pairs operate in strong inversion, and the constant transconductan

  8. Capacity Analysis of Two-Stage Production lines with Many Products

    NARCIS (Netherlands)

    M.B.M. de Koster (René)

    1987-01-01

    textabstractWe consider two-stage production lines with an intermediate buffer. A buffer is needed when fluctuations occur. For single-product production lines fluctuations in capacity availability may be caused by random processing times, failures and random repair times. For multi-product producti

  9. Kinetics analysis of two-stage austenitization in supermartensitic stainless steel

    DEFF Research Database (Denmark)

    Nießen, Frank; Villa, Matteo; Hald, John

    2017-01-01

    The martensite-to-austenite transformation in X4CrNiMo16-5-1 supermartensitic stainless steel was followed in-situ during isochronal heating at 2, 6 and 18 K min−1 applying energy-dispersive synchrotron X-ray diffraction at the BESSY II facility. Austenitization occurred in two stages, separated...

  10. An intracooling system for a novel two-stage sliding-vane air compressor

    Science.gov (United States)

    Murgia, Stefano; Valenti, Gianluca; Costanzo, Ida; Colletta, Daniele; Contaldi, Giulio

    2017-08-01

    Lube-oil injection is used in positive-displacement compressors and, among them, in sliding-vane machines to guarantee the correct lubrication of the moving parts and as sealing to prevent air leakage. Furthermore, lube-oil injection allows to exploit lubricant also as thermal ballast with a great thermal capacity to minimize the temperature increase during the compression. This study presents the design of a two-stage sliding-vane rotary compressor in which the air cooling is operated by high-pressure cold oil injection into a connection duct between the two stages. The heat exchange between the atomized oil jet and the air results in a decrease of the air temperature before the second stage, improving the overall system efficiency. This cooling system is named here intracooling, as opposed to intercooling. The oil injection is realized via pressure-swirl nozzles, both within the compressors and inside the intracooling duct. The design of the two-stage sliding-vane compressor is accomplished by way of a lumped parameter model. The model predicts an input power reduction as large as 10% for intercooled and intracooled two-stage compressors, the latter being slightly better, with respect to a conventional single-stage compressor for compressed air applications. An experimental campaign is conducted on a first prototype that comprises the low-pressure compressor and the intracooling duct, indicating that a significant temperature reduction is achieved in the duct.

  11. Development of a heavy-duty diesel engine with two-stage turbocharging

    NARCIS (Netherlands)

    Sturm, L.; Kruithof, J.

    2001-01-01

    A mean value model was developed by using Matrixx/ Systembuild simulation tool for designing real-time control algorithms for the two-stage engine. All desired characteristics are achieved, apart from lower A/F ratio at lower engine speeds and Turbocharger matches calculations. The CANbus is used to

  12. Two-stage, dilute sulfuric acid hydrolysis of wood : an investigation of fundamentals

    Science.gov (United States)

    John F. Harris; Andrew J. Baker; Anthony H. Conner; Thomas W. Jeffries; James L. Minor; Roger C. Pettersen; Ralph W. Scott; Edward L Springer; Theodore H. Wegner; John I. Zerbe

    1985-01-01

    This paper presents a fundamental analysis of the processing steps in the production of methanol from southern red oak (Quercus falcata Michx.) by two-stage dilute sulfuric acid hydrolysis. Data for hemicellulose and cellulose hydrolysis are correlated using models. This information is used to develop and evaluate a process design.

  13. Two-stage data envelopment analysis technique for evaluating internal supply chain efficiency

    Directory of Open Access Journals (Sweden)

    Nisakorn Somsuk

    2014-12-01

    Full Text Available A two-stage data envelopment analysis (DEA which uses mathematical linear programming techniques is applied to evaluate the efficiency of a system composed of two relational sub-processes, by which the outputs from the first sub-process (as the intermediate outputs of the system are the inputs for the second sub-process. The relative efficiencies of the system and its sub-processes can be measured by applying the two-stage DEA. According to the literature review on the supply chain management, this technique can be used as a tool for evaluating the efficiency of the supply chain composed of two relational sub-processes. The technique can help to determine the inefficient sub-processes. Once the inefficient sub-process was improved its efficiency, it would result in better aggregate efficiency of the supply chain. This paper aims to present a procedure for evaluating the efficiency of the supply chain by using the two-stage DEA, under the assumption of constant returns to scale, with an example of internal supply chain efficiency measurement of insurance companies by applying the two-stage DEA for illustration. Moreover, in this paper the authors also present some observations on the application of this technique.

  14. Two-stage estimation in copula models used in family studies

    DEFF Research Database (Denmark)

    Andersen, Elisabeth Anne Wreford

    2005-01-01

    In this paper register based family studies provide the motivation for studying a two-stage estimation procedure in copula models for multivariate failure time data. The asymptotic properties of the estimators in both parametric and semi-parametric models are derived, generalising the approach by...

  15. Innovative two-stage anaerobic process for effective codigestion of cheese whey and cattle manure.

    Science.gov (United States)

    Bertin, Lorenzo; Grilli, Selene; Spagni, Alessandro; Fava, Fabio

    2013-01-01

    The valorisation of agroindustrial waste through anaerobic digestion represents a significant opportunity for refuse treatment and renewable energy production. This study aimed to improve the codigestion of cheese whey (CW) and cattle manure (CM) by an innovative two-stage process, based on concentric acidogenic and methanogenic phases, designed for enhancing performance and reducing footprint. The optimum CW to CM ratio was evaluated under batch conditions. Thereafter, codigestion was implemented under continuous-flow conditions comparing one- and two-stage processes. The results demonstrated that the addition of CM in codigestion with CW greatly improved the anaerobic process. The highest methane yield was obtained co-treating the two substrates at equal ratio by using the innovative two-stage process. The proposed system reached the maximum value of 258 mL(CH4) g(gv(-1), which was more than twice the value obtained by the one-stage process and 10% higher than the value obtained by the two-stage one.

  16. Extraoral implants for orbit rehabilitation: a comparison between one-stage and two-stage surgeries.

    Science.gov (United States)

    de Mello, M C L M P; Guedes, R; de Oliveira, J A P; Pecorari, V A; Abrahão, M; Dib, L L

    2014-03-01

    The aim of the study was to compare the osseointegration success rate and time for delivery of the prosthesis among cases treated by two-stage or one-stage surgery for orbit rehabilitation between 2003 and 2011. Forty-five patients were included, 31 males and 14 females; 22 patients had two-stage surgery and 23 patients had one-stage surgery. A total 138 implants were installed, 42 (30.4%) on previously irradiated bone. The implant survival rate was 96.4%, with a success rate of 99.0% among non-irradiated patients and 90.5% among irradiated patients. Two-stage patients received 74 implants with a survival rate of 94.6% (four implants lost); one-stage surgery patients received 64 implants with a survival rate of 98.4% (one implant lost). The median time interval between implant fixation and delivery of the prosthesis for the two-stage group was 9.6 months and for the one-stage group was 4.0 months (P < 0.001). The one-stage technique proved to be reliable and was associated with few risks and complications; the rate of successful osseointegration was similar to those reported in the literature. The one-stage technique should be considered a viable procedure that shortens the time to final rehabilitation and facilitates appropriate patient follow-up treatment.

  17. Validation of Continuous CHP Operation of a Two-Stage Biomass Gasifier

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Henriksen, Ulrik Birk; Jensen, Torben Kvist

    2006-01-01

    The Viking gasification plant at the Technical University of Denmark was built to demonstrate a continuous combined heat and power operation of a two-stage gasifier fueled with wood chips. The nominal input of the gasifier is 75 kW thermal. To validate the continuous operation of the plant, a 9-d...

  18. High rate treatment of terephthalic acid production wastewater in a two-stage anaerobic bioreactor

    NARCIS (Netherlands)

    Kleerebezem, R.; Beckers, J.; Pol, L.W.H.; Lettinga, G.

    2005-01-01

    The feasibility was studied of anaerobic treatment of wastewater generated during purified terephthalic acid (PTA) production in two-stage upflow anaerobic sludge blanket (UASB) reactor system. The artificial influent of the system contained the main organic substrates of PTA-wastewater: acetate, be

  19. Thermal design of two-stage evaporative cooler based on thermal comfort criterion

    Science.gov (United States)

    Gilani, Neda; Poshtiri, Amin Haghighi

    2017-04-01

    Performance of two-stage evaporative coolers at various outdoor air conditions was numerically studied, and its geometric and physical characteristics were obtained based on thermal comfort criteria. For this purpose, a mathematical model was developed based on conservation equations of mass, momentum and energy to determine heat and mass transfer characteristics of the system. The results showed that two-stage indirect/direct cooler can provide the thermal comfort condition when outdoor air temperature and relative humidity are located in the range of 34-54 °C and 10-60 %, respectively. Moreover, as relative humidity of the ambient air rises, two-stage evaporative cooler with the smaller direct and larger indirect cooler will be needed. In building with high cooling demand, thermal comfort may be achieved at a greater air change per hour number, and thus an expensive two-stage evaporative cooler with a higher electricity consumption would be required. Finally, a design guideline was proposed to determine the size of required plate heat exchangers at various operating conditions.

  20. ADM1-based modeling of methane production from acidified sweet sorghum extractin a two stage process

    DEFF Research Database (Denmark)

    Antonopoulou, Georgia; Gavala, Hariklia N.; Skiadas, Ioannis

    2012-01-01

    The present study focused on the application of the Anaerobic Digestion Model 1 οn the methane production from acidified sorghum extract generated from a hydrogen producing bioreactor in a two-stage anaerobic process. The kinetic parameters for hydrogen and volatile fatty acids consumption were...

  1. Thermal design of two-stage evaporative cooler based on thermal comfort criterion

    Science.gov (United States)

    Gilani, Neda; Poshtiri, Amin Haghighi

    2016-09-01

    Performance of two-stage evaporative coolers at various outdoor air conditions was numerically studied, and its geometric and physical characteristics were obtained based on thermal comfort criteria. For this purpose, a mathematical model was developed based on conservation equations of mass, momentum and energy to determine heat and mass transfer characteristics of the system. The results showed that two-stage indirect/direct cooler can provide the thermal comfort condition when outdoor air temperature and relative humidity are located in the range of 34-54 °C and 10-60 %, respectively. Moreover, as relative humidity of the ambient air rises, two-stage evaporative cooler with the smaller direct and larger indirect cooler will be needed. In building with high cooling demand, thermal comfort may be achieved at a greater air change per hour number, and thus an expensive two-stage evaporative cooler with a higher electricity consumption would be required. Finally, a design guideline was proposed to determine the size of required plate heat exchangers at various operating conditions.

  2. A Two-Stage Exercise on the Binomial Distribution Using Minitab.

    Science.gov (United States)

    Shibli, M. Abdullah

    1990-01-01

    Describes a two-stage experiment that was designed to explain binomial distribution to undergraduate statistics students. A manual coin flipping exercise is explained as the first stage; a computerized simulation using MINITAB software is presented as stage two; and output from the MINITAB exercises is included. (two references) (LRW)

  3. The rearrangement process in a two-stage broadcast switching network

    DEFF Research Database (Denmark)

    Jacobsen, Søren B.

    1988-01-01

    The rearrangement process in the two-stage broadcast switching network presented by F.K. Hwang and G.W. Richards (ibid., vol.COM-33, no.10, p.1025-1035, Oct. 1985) is considered. By defining a certain function it is possible to calculate an upper bound on the number of connections to be moved...

  4. Two-stage laparoscopic resection of colon cancer and metastatic liver tumour

    Directory of Open Access Journals (Sweden)

    Yukio Iwashita

    2012-01-01

    Full Text Available We report herein the case of 70-year-old woman in whom colon cancer and a synchronous metastatic liver tumour were successfully resected laparoscopically. The tumours were treated in two stages. Both post-operative courses were uneventful, and there has been no recurrence during the 8 months since the second procedure.

  5. Two-stage laparoscopic resection of colon cancer and metastatic liver tumour

    Directory of Open Access Journals (Sweden)

    Iwashita Yukio

    2005-01-01

    Full Text Available We report herein the case of 70-year-old woman in whom colon cancer and a synchronous metastatic liver tumour were successfully resected laparoscopically. The tumours were treated in two stages. Both postoperative courses were uneventful, and there has been no recurrence during the 8 months since the second procedure.

  6. Two-stage bargaining with coverage extension in a dual labour market

    DEFF Research Database (Denmark)

    Roberts, Mark A.; Stæhr, Karsten; Tranæs, Torben

    2000-01-01

    This paper studies coverage extension in a simple general equilibrium model with a dual labour market. The union sector is characterized by two-stage bargaining whereas the firms set wages in the non-union sector. In this model firms and unions of the union sector have a commonality of interest...

  7. Relations between Lipschitz functions and convex functions

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    [1]Zajicek, J., On the differentation of convex functions in finite and infinite dimensional spaces, Czech J. Math.,1979, 29: 340-348.[2]Hu, T. C., Klee, V. L., Larman, D. G., Optimization of globally convex functions, SIAM J. Control Optim., 1989,27: 1026-1047.[3]Cepedello Boiso, M., Approximation of Lipschitz functions by △-convex functions in Banach spaces, Israel J.Math., 1998, 106: 269-284.[4]Asplund, E., Frechet differentiability of convex functions, Acta Math., 1968, 121: 31-47.[5]Johnson, J. A., Lipschitz spaces, Pacific J. Math, 1974, 51: 177-186.[6]Stromberg, T., The operation of infimal convolution, Dissert. Math., (Rozprawy Mat.), 1996, 325: 58.[7]Kadison, R. V., Ringrose, J. R., Fundamentals of the theory of operator algebras, volume Ⅰ: Elementary Theory,Graduate Studies in Math., vol. 15, Amer. Math. Soc., 1997.[8]Phelps, R. R., Convex functions,monotone operators and differentiability, Lect. Notes in Math., vol. 1364,Springer-Verlag, 1977.[9]Lindenstrauss, J., On operators which attain their norm, Israel J. Math., 1963, 1: 139-148.[10]Press, D., Gateaux differentiable functions are somewhere Frechet differentiable, Rend. Circ. Mat. Palermo,1984, 33: 122-133.[11]Press, D., Differentiability of Lipschitz functions on Banach spaces, J. Funct. Anal., 1990, 91:312-345.[12]Lindenstrauss, J., Press, D., On Frechet differentiability of Lipschitz maps between Banach spaces, Annals of Math., 2003, 157: 257-288.[13]Press, D., Gateaux differentiable Lipschitz functions need not be Frechet differentiable on a residual set, Supplemento Rend. Circ. Mat. Palermo, Serie Ⅱ, 1982, 2: 217-222.

  8. Fast approximate convex decomposition using relative concavity

    KAUST Repository

    Ghosh, Mukulika

    2013-02-01

    Approximate convex decomposition (ACD) is a technique that partitions an input object into approximately convex components. Decomposition into approximately convex pieces is both more efficient to compute than exact convex decomposition and can also generate a more manageable number of components. It can be used as a basis of divide-and-conquer algorithms for applications such as collision detection, skeleton extraction and mesh generation. In this paper, we propose a new method called Fast Approximate Convex Decomposition (FACD) that improves the quality of the decomposition and reduces the cost of computing it for both 2D and 3D models. In particular, we propose a new strategy for evaluating potential cuts that aims to reduce the relative concavity, rather than absolute concavity. As shown in our results, this leads to more natural and smaller decompositions that include components for small but important features such as toes or fingers while not decomposing larger components, such as the torso, that may have concavities due to surface texture. Second, instead of decomposing a component into two pieces at each step, as in the original ACD, we propose a new strategy that uses a dynamic programming approach to select a set of n c non-crossing (independent) cuts that can be simultaneously applied to decompose the component into n c+1 components. This reduces the depth of recursion and, together with a more efficient method for computing the concavity measure, leads to significant gains in efficiency. We provide comparative results for 2D and 3D models illustrating the improvements obtained by FACD over ACD and we compare with the segmentation methods in the Princeton Shape Benchmark by Chen et al. (2009) [31]. © 2012 Elsevier Ltd. All rights reserved.

  9. On the convexity of N-Chebyshev sets

    Science.gov (United States)

    Borodin, Petr A.

    2011-10-01

    We define N-Chebyshev sets in a Banach space X for every positive integer N (when N=1, these are ordinary Chebyshev sets) and study conditions that guarantee their convexity. In particular, we prove that all N-Chebyshev sets are convex when N is even and X is uniformly convex or N\\ge 3 is odd and X is smooth uniformly convex.

  10. The Identification of Convex Function on Riemannian Manifold

    Directory of Open Access Journals (Sweden)

    Li Zou

    2014-01-01

    Full Text Available The necessary and sufficient condition of convex function is significant in nonlinear convex programming. This paper presents the identification of convex function on Riemannian manifold by use of Penot generalized directional derivative and the Clarke generalized gradient. This paper also presents a method for judging whether a point is the global minimum point in the inequality constraints. Our objective here is to extend the content and proof the necessary and sufficient condition of convex function to Riemannian manifolds.

  11. ON THE PRODUCT OF GATEAUX DIFFERENTIABILITY LOCALLY CONVEX SPACES

    Institute of Scientific and Technical Information of China (English)

    Shen Xisheng; Cheng Lixin

    2005-01-01

    A locally convex space is said to be a Gateaux differentiability space (GDS)provided every continuous convex function defined on a nonempty convex open subset D of the space is densely Gateaux differentiable in D.This paper shows that the product of a GDS and a family of separable Frechet spaces is a GDS,and that the product of a GDS and an arbitrary locally convex space endowed with the weak topology is a GDS.

  12. The Bracka two-stage repair for severe proximal hypospadias: A single center experience

    Directory of Open Access Journals (Sweden)

    Rakesh S Joshi

    2015-01-01

    Full Text Available Background: Surgical correction of severe proximal hypospadias represents a significant surgical challenge and single-stage corrections are often associated with complications and reoperations. Bracka two-stage repair is an attractive alternative surgical procedure with superior, reliable, and reproducible results. Purpose: To study the feasibility and applicability of Bracka two-stage repair for the severe proximal hypospadias and to analyze the outcomes and complications of this surgical technique. Materials and Methods: This prospective study was conducted from January 2011 to December 2013. Bracka two-stage repair was performed using inner preputial skin as a free graft in subjects with proximal hypospadias in whom severe degree of chordee and/or poor urethral plate was present. Only primary cases were included in this study. All subjects received three doses of intra-muscular testosterone 3 weeks apart before first stage. Second stage was performed 6 months after the first stage. Follow-up ranged from 6 months to 24 months. Results: A total of 43 patients operated for Bracka repair, out of which 30 patients completed two-stage repair. Mean age of the patients was 4 years and 8 months. We achieved 100% graft uptake and no revision was required. Three patients developed fistula, while two had metal stenosis. Glans dehiscence, urethral stricture and the residual chordee were not found during follow-up and satisfactory cosmetic results with good urinary stream were achieved in all cases. Conclusion: The Bracka two-stage repair is a safe and reliable approach in select patients in whom it is impractical to maintain the axial integrity of the urethral plate, and, therefore, a full circumference urethral reconstruction become necessary. This gives good results both in terms of restoration of normal function with minimal complication.

  13. Optimisation of two-stage screw expanders for waste heat recovery applications

    Science.gov (United States)

    Read, M. G.; Smith, I. K.; Stosic, N.

    2015-08-01

    It has previously been shown that the use of two-phase screw expanders in power generation cycles can achieve an increase in the utilisation of available energy from a low temperature heat source when compared with more conventional single-phase turbines. However, screw expander efficiencies are more sensitive to expansion volume ratio than turbines, and this increases as the expander inlet vapour dryness fraction decreases. For singlestage screw machines with low inlet dryness, this can lead to under expansion of the working fluid and low isentropic efficiency for the expansion process. The performance of the cycle can potentially be improved by using a two-stage expander, consisting of a low pressure machine and a smaller high pressure machine connected in series. By expanding the working fluid over two stages, the built-in volume ratios of the two machines can be selected to provide a better match with the overall expansion process, thereby increasing efficiency for particular inlet and discharge conditions. The mass flow rate though both stages must however be matched, and the compromise between increasing efficiency and maximising power output must also be considered. This research uses a rigorous thermodynamic screw machine model to compare the performance of single and two-stage expanders over a range of operating conditions. The model allows optimisation of the required intermediate pressure in the two- stage expander, along with the rotational speed and built-in volume ratio of both screw machine stages. The results allow the two-stage machine to be fully specified in order to achieve maximum efficiency for a required power output.

  14. Allometric relationships between traveltime channel networks, convex hulls, and convexity measures

    Science.gov (United States)

    Tay, Lea Tien; Sagar, B. S. Daya; Chuah, Hean Teik

    2006-06-01

    The channel network (S) is a nonconvex set, while its basin [C(S)] is convex. We remove open-end points of the channel connectivity network iteratively to generate a traveltime sequence of networks (Sn). The convex hulls of these traveltime networks provide an interesting topological quantity, which has not been noted thus far. We compute lengths of shrinking traveltime networks L(Sn) and areas of corresponding convex hulls C(Sn), the ratios of which provide convexity measures CM(Sn) of traveltime networks. A statistically significant scaling relationship is found for a model network in the form L(Sn) ˜ A[C(Sn)]0.57. From the plots of the lengths of these traveltime networks and the areas of their corresponding convex hulls as functions of convexity measures, new power law relations are derived. Such relations for a model network are CM(Sn) ˜ ? and CM(Sn) ˜ ?. In addition to the model study, these relations for networks derived from seven subbasins of Cameron Highlands region of Peninsular Malaysia are provided. Further studies are needed on a large number of channel networks of distinct sizes and topologies to understand the relationships of these new exponents with other scaling exponents that define the scaling structure of river networks.

  15. Reverse convex problems: an approach based on optimality conditions

    Directory of Open Access Journals (Sweden)

    Ider Tseveendorj

    2006-01-01

    Full Text Available We present some results concerning reverse convex problems. Global optimality conditions for the problems with a nonsmooth reverse convex constraint are established and convergence of an algorithm in the case of linear program with an additional quadratic reverse convex constraint is studied.

  16. On Quasi E-Convex Bilevel Programming Problem

    Directory of Open Access Journals (Sweden)

    E. A. Youness

    2005-01-01

    Full Text Available Bilevel programming problems involve two optimization problems where the data of the first one is implicity determined by the solution of the second. This study introduces the notions of E-convexity and quasi E-convexity in bilevel programming problems to generalize quasi convex bilevel programming problems.

  17. Reverse convex problems: an approach based on optimality conditions

    OpenAIRE

    Ider Tseveendorj

    2006-01-01

    We present some results concerning reverse convex problems. Global optimality conditions for the problems with a nonsmooth reverse convex constraint are established and convergence of an algorithm in the case of linear program with an additional quadratic reverse convex constraint is studied.

  18. A Generalization of Uniformly Extremely Convex Banach Spaces

    OpenAIRE

    Suyalatu Wulede; Wurichaihu Bai; Wurina Bao

    2016-01-01

    We discuss a new class of Banach spaces which are the generalization of uniformly extremely convex spaces introduced by Wulede and Ha. We prove that the new class of Banach spaces lies strictly between either the classes of k-uniformly rotund spaces and k-strongly convex spaces or classes of fully k-convex spaces and k-strongly convex spaces and has no inclusive relation with the class of locally k-uniformly convex spaces. We obtain in addition some characterizations and properties of this ne...

  19. Matching tutor to student: rules and mechanisms for efficient two-stage learning in neural circuits

    CERN Document Server

    Tesileanu, Tiberiu; Balasubramanian, Vijay

    2016-01-01

    Existing models of birdsong learning assume that brain area LMAN introduces variability into song for trial-and-error learning. Recent data suggest that LMAN also encodes a corrective bias driving short-term improvements in song. These later consolidate in area RA, a motor cortex analogue downstream of LMAN. We develop a new model of such two-stage learning. Using a stochastic gradient descent approach, we derive how 'tutor' circuits should match plasticity mechanisms in 'student' circuits for efficient learning. We further describe a reinforcement learning framework with which the tutor can build its teaching signal. We show that mismatching the tutor signal and plasticity mechanism can impair or abolish learning. Applied to birdsong, our results predict the temporal structure of the corrective bias from LMAN given a plasticity rule in RA. Our framework can be applied predictively to other paired brain areas showing two-stage learning.

  20. HRI catalytic two-stage liquefaction (CTSL) process materials: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.W.; Later, D.W.

    1985-12-01

    This report presents data from the chemical analysis and biological testing of coal liquefaction materials obtained from the Hydrocarbon Research, Incorporated (HRI) catalytic two-stage liquefaction (CTSL) process. Materials from both an experimental run and a 25-day demonstration run were analyzed. Chemical methods of analysis included adsorption column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, low-voltage probe-inlet mass spectrometry, and proton nuclear magnetic resonance spectroscopy. The biological activity was evaluated using the standard microbial mutagenicity assay and an initiation/promotion assay for mouse-skin tumorigenicity. Where applicable, the results obtained from the analyses of the CTSL materials have been compared to those obtained from the integrated and nonintegrated two-stage coal liquefaction processes. 18 refs., 26 figs., 22 tabs.

  1. Two-stage precipitation process of iron and arsenic from acid leaching solutions

    Institute of Scientific and Technical Information of China (English)

    N.J.BOLIN; J.E.SUNDKVIST

    2008-01-01

    A leaching process for base metals recovery often generates considerable amounts of impurities such as iron and arsenic into the solution.It is a challenge to separate the non-valuable metals into manageable and stable waste products for final disposal,without loosing the valuable constituents.Boliden Mineral AB has patented a two-stage precipitation process that gives a very clean iron-arsenic precipitate by a minimum of coprecipitation of base metals.The obtained product shows to have good sedimentation and filtration properties,which makes it easy to recover the iron-arsenic depleted solution by filtration and washing of the precipitate.Continuos bench scale tests have been done,showing the excellent results achieved by the two-stage precipitation process.

  2. S-band gain-flattened EDFA with two-stage double-pass configuration

    Science.gov (United States)

    Fu, Hai-Wei; Xu, Shi-Chao; Qiao, Xue-Guang; Jia, Zhen-An; Liu, Ying-Gang; Zhou, Hong

    2011-11-01

    A gain-flattened S-band erbium-doped fiber amplifier (EDFA) using standard erbium-doped fiber (EDF) is proposed and experimentally demonstrated. The proposed amplifier with two-stage double-pass configuration employs two C-band suppressing filters to obtain the optical gain in S-band. The amplifier provides a maximum signal gain of 41.6 dB at 1524 nm with the corresponding noise figure of 3.8 dB. Furthermore, with a well-designed short-pass filter as a gain flattening filter (GFF), we are able to develop the S-band EDFA with a flattened gain of more than 20 dB in 1504-1524 nm. In the experiment, the two-stage double-pass amplifier configuration improves performance of gain and noise figure compared with the configuration of single-stage double-pass S-band EDFA.

  3. Power Frequency Oscillation Suppression Using Two-Stage Optimized Fuzzy Logic Controller for Multigeneration System

    Directory of Open Access Journals (Sweden)

    Y. K. Bhateshvar

    2016-01-01

    Full Text Available This paper attempts to develop a linearized model of automatic generation control (AGC for an interconnected two-area reheat type thermal power system in deregulated environment. A comparison between genetic algorithm optimized PID controller (GA-PID, particle swarm optimized PID controller (PSO-PID, and proposed two-stage based PSO optimized fuzzy logic controller (TSO-FLC is presented. The proposed fuzzy based controller is optimized at two stages: one is rule base optimization and other is scaling factor and gain factor optimization. This shows the best dynamic response following a step load change with different cases of bilateral contracts in deregulated environment. In addition, performance of proposed TSO-FLC is also examined for ±30% changes in system parameters with different type of contractual demands between control areas and compared with GA-PID and PSO-PID. MATLAB/Simulink® is used for all simulations.

  4. A two-stage scheme for multi-view human pose estimation

    Science.gov (United States)

    Yan, Junchi; Sun, Bing; Liu, Yuncai

    2010-08-01

    We present a two-stage scheme integrating voxel reconstruction and human motion tacking. By combining voxel reconstruction with human motion tracking interactively, our method can work in a cluttered background where perfect foreground silhouettes are hardly available. For each frame, a silhouette-based 3D volume reconstruction method and hierarchical tracking algorithm are applied in two stages. In the first stage, coarse reconstruction and tracking results are obtained, and then the refinement for reconstruction is applied in the second stage. The experimental results demonstrate our approach is promising. Although our method focuses on the problem of human body voxel reconstruction and motion tracking in this paper, our scheme can be used to reconstruct voxel data and infer the pose of many specified rigid and articulated objects.

  5. Toward Improving Electrocardiogram (ECG) Biometric Verification using Mobile Sensors: A Two-Stage Classifier Approach.

    Science.gov (United States)

    Tan, Robin; Perkowski, Marek

    2017-02-20

    Electrocardiogram (ECG) signals sensed from mobile devices pertain the potential for biometric identity recognition applicable in remote access control systems where enhanced data security is demanding. In this study, we propose a new algorithm that consists of a two-stage classifier combining random forest and wavelet distance measure through a probabilistic threshold schema, to improve the effectiveness and robustness of a biometric recognition system using ECG data acquired from a biosensor integrated into mobile devices. The proposed algorithm is evaluated using a mixed dataset from 184 subjects under different health conditions. The proposed two-stage classifier achieves a total of 99.52% subject verification accuracy, better than the 98.33% accuracy from random forest alone and 96.31% accuracy from wavelet distance measure algorithm alone. These results demonstrate the superiority of the proposed algorithm for biometric identification, hence supporting its practicality in areas such as cloud data security, cyber-security or remote healthcare systems.

  6. Effect of two-stage aging on superplasticity of Al-Li alloy

    Institute of Scientific and Technical Information of China (English)

    LUO Zhi-hui; ZHANG Xin-ming; DU Yu-xuan; YE Ling-ying

    2006-01-01

    The effect of two-stage aging on the microstructures and superplasticity of 01420 Al-Li alloy was investigated by means of OM, TEM analysis and stretching experiment. The results demonstrate that the second phase particles distributed more uniformly with a larger volume fraction can be observed after the two-stage aging (120 ℃, 12 h+300 ℃, 36 h) compared with the single-aging(300 ℃, 48 h). After rolling and recrystallization annealing, fine grains with size of 8-10 μm are obtained, and the superplastic elongation of the specimens reaches 560% at strain rate of 8×10-4 s-1 and 480 ℃. Uniformly distributed fine particles precipitate both on grain boundaries and in grains at lower temperature. When the sheet is aged at high temperature, the particles become coarser with a large volume fraction.

  7. Two stage bioethanol refining with multi litre stacked microbial fuel cell and microbial electrolysis cell.

    Science.gov (United States)

    Sugnaux, Marc; Happe, Manuel; Cachelin, Christian Pierre; Gloriod, Olivier; Huguenin, Gérald; Blatter, Maxime; Fischer, Fabian

    2016-12-01

    Ethanol, electricity, hydrogen and methane were produced in a two stage bioethanol refinery setup based on a 10L microbial fuel cell (MFC) and a 33L microbial electrolysis cell (MEC). The MFC was a triple stack for ethanol and electricity co-generation. The stack configuration produced more ethanol with faster glucose consumption the higher the stack potential. Under electrolytic conditions ethanol productivity outperformed standard conditions and reached 96.3% of the theoretically best case. At lower external loads currents and working potentials oscillated in a self-synchronized manner over all three MFC units in the stack. In the second refining stage, fermentation waste was converted into methane, using the scale up MEC stack. The bioelectric methanisation reached 91% efficiency at room temperature with an applied voltage of 1.5V using nickel cathodes. The two stage bioethanol refining process employing bioelectrochemical reactors produces more energy vectors than is possible with today's ethanol distilleries.

  8. HRI catalytic two-stage liquefaction (CTSL) process materials: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.W.; Later, D.W.

    1985-12-01

    This report presents data from the chemical analysis and biological testing of coal liquefaction materials obtained from the Hydrocarbon Research, Incorporated (HRI) catalytic two-stage liquefaction (CTSL) process. Materials from both an experimental run and a 25-day demonstration run were analyzed. Chemical methods of analysis included adsorption column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, low-voltage probe-inlet mass spectrometry, and proton nuclear magnetic resonance spectroscopy. The biological activity was evaluated using the standard microbial mutagenicity assay and an initiation/promotion assay for mouse-skin tumorigenicity. Where applicable, the results obtained from the analyses of the CTSL materials have been compared to those obtained from the integrated and nonintegrated two-stage coal liquefaction processes. 18 refs., 26 figs., 22 tabs.

  9. Performance measurement of insurance firms using a two-stage DEA method

    Directory of Open Access Journals (Sweden)

    Raha Jalili Sabet

    2013-01-01

    Full Text Available Measuring the relative performance of insurance firms plays an important role in this industry. In this paper, we present a two-stage data envelopment analysis to measure the performance of insurance firms, which were active over the period of 2006-2010. The proposed study of this paper performs DEA method in two stages where the first stage considers five inputs and three outputs while the second stage considers the outputs of the first stage as the inputs of the second stage and uses three different outputs for this stage. The results of our survey have indicated that while there were 4 efficient insurance firms most other insurances were noticeably inefficient. This means market was monopolized mostly by a limited number of insurance firms and competition was not fare enough to let other firms participate in economy, more efficiently.

  10. Direct Torque Control of Sensorless Induction Machine Drives: A Two-Stage Kalman Filter Approach

    Directory of Open Access Journals (Sweden)

    Jinliang Zhang

    2015-01-01

    Full Text Available Extended Kalman filter (EKF has been widely applied for sensorless direct torque control (DTC in induction machines (IMs. One key problem associated with EKF is that the estimator suffers from computational burden and numerical problems resulting from high order mathematical models. To reduce the computational cost, a two-stage extended Kalman filter (TEKF based solution is presented for closed-loop stator flux, speed, and torque estimation of IM to achieve sensorless DTC-SVM operations in this paper. The novel observer can be similarly derived as the optimal two-stage Kalman filter (TKF which has been proposed by several researchers. Compared to a straightforward implementation of a conventional EKF, the TEKF estimator can reduce the number of arithmetic operations. Simulation and experimental results verify the performance of the proposed TEKF estimator for DTC of IMs.

  11. Syme's two-stage amputation in insulin-requiring diabetics with gangrene of the forefoot.

    Science.gov (United States)

    Pinzur, M S; Morrison, C; Sage, R; Stuck, R; Osterman, H; Vrbos, L

    1991-06-01

    Thirty-five insulin-requiring adult diabetic patients underwent 38 Syme's Two-Stage amputations for gangrene of the forefoot with nonreconstructible peripheral vascular insufficiency. All had a minimum Doppler ischemic index of 0.5, serum albumin of 3.0 gm/dl, and total lymphocyte count of 1500. Thirty-one (81.6%) eventually healed and were uneventfully fit with a prosthesis. Regional anesthesia was used in all of the patients, with 22 spinal and 16 ankle block anesthetics. Twenty-seven (71%) returned to their preamputation level of ambulatory function. Six (16%) had major, and fifteen (39%) minor complications following the first stage surgery. The results of this study support the use of the Syme's Two-Stage amputation in adult diabetic patients with gangrene of the forefoot requiring amputation.

  12. Low-noise SQUIDs with large transfer: two-stage SQUIDs based on DROSs

    Science.gov (United States)

    Podt, M.; Flokstra, J.; Rogalla, H.

    2002-08-01

    We have realized a two-stage integrated superconducting quantum interference device (SQUID) system with a closed loop bandwidth of 2.5 MHz, operated in a direct voltage readout mode. The corresponding flux slew rate was 1.3×10 5Φ0/s and the measured white flux noise was 1.3 μ Φ0/√Hz at 4.2 K. The system is based on a conventional dc SQUID with a double relaxation oscillation SQUID (DROS) as the second stage. Because of the large flux-to-voltage transfer, the sensitivity of the system is completely determined by the sensor SQUID and not by the DROS or the room-temperature preamplifier. Decreasing the Josephson junction area enables a further improvement of the sensitivity of the two-stage SQUID systems.

  13. Interval estimation of binomial proportion in clinical trials with a two-stage design.

    Science.gov (United States)

    Tsai, Wei-Yann; Chi, Yunchan; Chen, Chia-Min

    2008-01-15

    Generally, a two-stage design is employed in Phase II clinical trials to avoid giving patients an ineffective drug. If the number of patients with significant improvement, which is a binomial response, is greater than a pre-specified value at the first stage, then another binomial response at the second stage is also observed. This paper considers interval estimation of the response probability when the second stage is allowed to continue. Two asymptotic interval estimators, Wald and score, as well as two exact interval estimators, Clopper-Pearson and Sterne, are constructed according to the two binomial responses from this two-stage design, where the binomial response at the first stage follows a truncated binomial distribution. The mean actual coverage probability and expected interval width are employed to evaluate the performance of these interval estimators. According to the comparison results, the score interval is recommended for both Simon's optimal and minimax designs.

  14. Experiment and surge analysis of centrifugal two-stage turbocharging system

    Institute of Scientific and Technical Information of China (English)

    Yituan HE; Chaochen MA

    2008-01-01

    To study a centrifugal two-stage turbocharging system's surge and influencing factors, a special test bench was set up and the system surge test was performed. The test results indicate that the measured parameters such as air mass flow and rotation speed of a high pressure (HP) stage compressor can be converted into corrected para-meters under a standard condition according to the Mach number similarity criterion, because the air flow in a HP stage compressor has entered the Reynolds number (Re) auto-modeling range. Accordingly, the reasons leading to a two-stage turbocharging system's surge can be analyzed according to the corrected mass flow characteristic maps and actual operating conditions of HP and low pressure (LP) stage compressors.

  15. The heart of a convex body

    CERN Document Server

    Brasco, Lorenzo

    2012-01-01

    We investigate some basic properties of the {\\it heart} $\\heartsuit(\\mathcal{K})$ of a convex set $\\mathcal{K}.$ It is a subset of $\\mathcal{K},$ whose definition is based on mirror reflections of euclidean space, and is a non-local object. The main motivation of our interest for $\\heartsuit(\\mathcal{K})$ is that this gives an estimate of the location of the hot spot in a convex heat conductor with boundary temperature grounded at zero. Here, we investigate on the relation between $\\heartsuit(\\mathcal{K})$ and the mirror symmetries of $\\mathcal{K};$ we show that $\\heartsuit(\\mathcal{K})$ contains many (geometrically and phisically) relevant points of $\\mathcal{K};$ we prove a simple geometrical lower estimate for the diameter of $\\heartsuit(\\mathcal{K});$ we also prove an upper estimate for the area of $\\heartsuit(\\mathcal{K}),$ when $\\mathcal{K}$ is a triangle.

  16. Coalescence between two convex liquid surfaces

    Science.gov (United States)

    Yang, Fan; Jian, Zhen; Li, Erqiang; Thoroddsen, S. T.

    2015-11-01

    We study the coalescence of two convex surfaces of the same liquid. One of the convex free surfaces is formed at a circular opening of a closed tank by imposing a negative pressure difference. The other surface is a droplet of larger curvature, which is pendant from a concentric nozzle. The coalescence starts from near-zero velocity, so the configuration can be characterized by two dimensionless numbers: the Ohnesorge number Oh = μ /√{ ργL } and the radius ratio between the two surfaces α =rd /rs . We use high-speed video, PIV and numerical simulations, using the Gerris program, to study the dynamics of the coalescence. Our focus is on the interface shapes, the growth-rate of the neck connecting the two surfaces and the formation of a vortex ring. The growth-rate is compared to earlier models for the coalescence of drops or bubbles.

  17. Convex Modeling of Interactions with Strong Heredity

    Science.gov (United States)

    Haris, Asad; Witten, Daniela; Simon, Noah

    2015-01-01

    We consider the task of fitting a regression model involving interactions among a potentially large set of covariates, in which we wish to enforce strong heredity. We propose FAMILY, a very general framework for this task. Our proposal is a generalization of several existing methods, such as VANISH [Radchenko and James, 2010], hierNet [Bien et al., 2013], the all-pairs lasso, and the lasso using only main effects. It can be formulated as the solution to a convex optimization problem, which we solve using an efficient alternating directions method of multipliers (ADMM) algorithm. This algorithm has guaranteed convergence to the global optimum, can be easily specialized to any convex penalty function of interest, and allows for a straightforward extension to the setting of generalized linear models. We derive an unbiased estimator of the degrees of freedom of FAMILY, and explore its performance in a simulation study and on an HIV sequence data set. PMID:28316461

  18. Convex Arrhenius plots and their interpretation

    Science.gov (United States)

    Truhlar, Donald G.; Kohen, Amnon

    2001-01-01

    This paper draws attention to selected experiments on enzyme-catalyzed reactions that show convex Arrhenius plots, which are very rare, and points out that Tolman's interpretation of the activation energy places a fundamental model-independent constraint on any detailed explanation of these reactions. The analysis presented here shows that in such systems, the rate coefficient as a function of energy is not just increasing more slowly than expected, it is actually decreasing. This interpretation of the data provides a constraint on proposed microscopic models, i.e., it requires that any successful model of a reaction with a convex Arrhenius plot should be consistent with the microcanonical rate coefficient being a decreasing function of energy. The implications and limitations of this analysis to interpreting enzyme mechanisms are discussed. This model-independent conclusion has broad applicability to all fields of kinetics, and we also draw attention to an analogy with diffusion in metastable fluids and glasses. PMID:11158559

  19. Two-staged management for all types of congenital pouch colon

    Directory of Open Access Journals (Sweden)

    Rajendra K Ghritlaharey

    2013-01-01

    Full Text Available Background: The aim of this study was to review our experience with two-staged management for all types of congenital pouch colon (CPC. Patients and Methods: This retrospective study included CPC cases that were managed with two-staged procedures in the Department of Paediatric Surgery, over a period of 12 years from 1 January 2000 to 31 December 2011. Results: CPC comprised of 13.71% (97 of 707 of all anorectal malformations (ARM and 28.19% (97 of 344 of high ARM. Eleven CPC cases (all males were managed with two-staged procedures. Distribution of cases (Narsimha Rao et al.′s classification into types I, II, III, and IV were 1, 2, 6, and 2, respectively. Initial operative procedures performed were window colostomy (n = 6, colostomy proximal to pouch (n = 4, and ligation of colovesical fistula and end colostomy (n = 1. As definitive procedures, pouch excision with abdomino-perineal pull through (APPT of colon in eight, and pouch excision with APPT of ileum in three were performed. The mean age at the time of definitive procedures was 15.6 months (ranges from 3 to 53 months and the mean weight was 7.5 kg (ranges from 4 to 11 kg. Good fecal continence was observed in six and fair in two cases in follow-up periods, while three of our cases lost to follow up. There was no mortality following definitive procedures amongst above 11 cases. Conclusions: Two-staged procedures for all types of CPC can also be performed safely with good results. The most important fact that the definitive procedure is being done without protective stoma and therefore, it avoids stoma closure, stoma-related complications, related cost of stoma closure and hospital stay.

  20. Hybrid staging of a Lysholm positive displacement engine with two Westinghouse two stage impulse Curtis turbines

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D.A.

    1982-06-01

    The University of California at Berkeley has tested and modeled satisfactorly a hybrid staged Lysholm engine (positive displacement) with a two stage Curtis wheel turbine. The system operates in a stable manner over its operating range (0/1-3/1 water ratio, 120 psia input). Proposals are made for controlling interstage pressure with a partial admission turbine and volume expansion to control mass flow and pressure ratio for the Lysholm engine.

  1. Noncausal two-stage image filtration at presence of observations with anomalous errors

    Directory of Open Access Journals (Sweden)

    S. V. Vishnevyy

    2013-04-01

    Full Text Available Introduction. It is necessary to develop adaptive algorithms, which allow to detect such regions and to apply filter with respective parameters for suppression of anomalous noises for the purposes of image filtration, which consist of regions with anomalous errors. Development of adaptive algorithm for non-causal two-stage images filtration at pres-ence of observations with anomalous errors. The adaptive algorithm for noncausal two-stage filtration is developed. On the first stage the adaptive one-dimensional algorithm for causal filtration is used for independent processing along rows and columns of image. On the second stage the obtained data are united and a posteriori estimations are calculated. Results of experimental investigations. The developed adaptive algorithm for noncausal images filtration at presence of observations with anomalous errors is investigated on the model sample by means of statistical modeling on PC. The image is modeled as a realization of Gaussian-Markov random field. The modeled image is corrupted with uncorrelated Gaussian noise. Regions of image with anomalous errors are corrupted with uncorrelated Gaussian noise which has higher power than normal noise on the rest part of the image. Conclusions. The analysis of adaptive algorithm for noncausal two-stage filtration is done. The characteristics of accuracy of computed estimations are shown. The comparisons of first stage and second stage of the developed adaptive algorithm are done. Adaptive algorithm is compared with known uniform two-stage algorithm of image filtration. According to the obtained results the uniform algorithm does not suppress anomalous noise meanwhile the adaptive algorithm shows good results.

  2. Full noise characterization of a low-noise two-stage SQUID amplifier

    Energy Technology Data Exchange (ETDEWEB)

    Falferi, P [Istituto di Fotonica e Nanotecnologie, CNR-Fondazione Bruno Kessler, 38100 Povo, Trento (Italy); Mezzena, R [INFN, Gruppo Collegato di Trento, Sezione di Padova, 38100 Povo, Trento (Italy); Vinante, A [INFN, Sezione di Padova, 35131 Padova (Italy)], E-mail: falferi@science.unitn.it

    2009-07-15

    From measurements performed on a low-noise two-stage SQUID amplifier coupled to a high- Q electrical resonator we give a complete noise characterization of the SQUID amplifier around the resonator frequency of 11 kHz in terms of additive, back action and cross-correlation noise spectral densities. The minimum noise temperature evaluated at 135 mK is 10 {mu}K and corresponds to an energy resolution of 18{Dirac_h}.

  3. A covariate adjusted two-stage allocation design for binary responses in randomized clinical trials.

    Science.gov (United States)

    Bandyopadhyay, Uttam; Biswas, Atanu; Bhattacharya, Rahul

    2007-10-30

    In the present work, we develop a two-stage allocation rule for binary response using the log-odds ratio within the Bayesian framework allowing the current allocation to depend on the covariate value of the current subject. We study, both numerically and theoretically, several exact and limiting properties of this design. The applicability of the proposed methodology is illustrated by using some data set. We compare this rule with some of the existing rules by computing various performance measures.

  4. Development of a Novel Type Catalyst SY-2 for Two-Stage Hydrogenation of Pyrolysis Gasoline

    Institute of Scientific and Technical Information of China (English)

    Wu Linmei; Zhang Xuejun; Zhang Zhihua; Wang Fucun

    2004-01-01

    By using the group ⅢB or groupⅦB metals and modulating the characteristics of electric charges on carrier surface, improving the catalyst preparation process and techniques for loading the active metal components, a novel type SY-2 catalyst earmarked for two-stage hydrogenation of pyrolysis gasoline has been developed. The catalyst evaluation results have indicated that the novel catalyst is characterized by a better hydrogenation reaction activity to give higher aromatic yield.

  5. Investigation on a two-stage solvay refrigerator with magnetic material regenerator

    Science.gov (United States)

    Chen, Guobang; Zheng, Jianyao; Zhang, Fagao; Yu, Jianping; Tao, Zhenshi; Ding, Cenyu; Zhang, Liang; Wu, Peiyi; Long, Yi

    This paper describes experimental results that the no-load temperature of a two-stage Solvay refrigerator has been reached in liquid helium temperature region from the original 11.5 K by using magnetic regenerative material instead of lead. The structure and technological characteristics of the prototype machine are presented. The effects of operating frequency and pressure on the refrigerating temperature have been discussed in this paper.

  6. Biological hydrogen production from olive mill wastewater with two-stage processes

    Energy Technology Data Exchange (ETDEWEB)

    Eroglu, Ela; Eroglu, Inci [Department of Chemical Engineering, Middle East Technical University, 06531, Ankara (Turkey); Guenduez, Ufuk; Yuecel, Meral [Department of Biology, Middle East Technical University, 06531, Ankara (Turkey); Tuerker, Lemi [Department of Chemistry, Middle East Technical University, 06531, Ankara (Turkey)

    2006-09-15

    In the present work two novel two-stage hydrogen production processes from olive mill wastewater (OMW) have been introduced. The first two-stage process involved dark-fermentation followed by a photofermentation process. Dark-fermentation by activated sludge cultures and photofermentation by Rhodobacter sphaeroides O.U.001 were both performed in 55ml glass vessels, under anaerobic conditions. In some cases of dark-fermentation, activated sludge was initially acclimatized to the OMW to provide the adaptation of microorganisms to the extreme conditions of OMW. The highest hydrogen production potential obtained was 29l{sub H{sub 2}}/l{sub OMW} after photofermentation with 50% (v/v) effluent of dark fermentation with activated sludge. Photofermentation with 50% (v/v) effluent of dark fermentation with acclimated activated sludge had the highest hydrogen production rate (0.008ll{sup -1}h{sup -1}). The second two-stage process involved a clay treatment step followed by photofermentation by R. sphaeroides O.U.001. Photofermentation with the effluent of the clay pretreatment process (4% (v/v)) gives the highest hydrogen production potential (35l{sub H{sub 2}}/l{sub OMW}), light conversion efficiency (0.42%) and COD conversion efficiency (52%). It was concluded that both pretreatment processes enhanced the photofermentative hydrogen production process. Moreover, hydrogen could be produced with highly concentrated OMW. Two-stage processes developed in the present investigation have a high potential for solving the environmental problems caused by OMW. (author)

  7. The two-stage aegean extension, from localized to distributed, a result of slab rollback acceleration

    OpenAIRE

    Brun, Jean-Pierre; Faccenna, Claudio; Gueydan, Frédéric; Sokoutis, Dimitrios; Philippon, Mélody; Kydonakis, Konstantinos; Gorini, Christian

    2016-01-01

    International audience; Back-arc extension in the Aegean, which was driven by slab rollback since 45 Ma, is described here for the first time in two stages. From Middle Eocene to Middle Miocene, deformation was localized leading to i) the exhumation of high-pressure metamorphic rocks to crustal depths, ii) the exhumation of high-temperature metamorphic rocks in core complexes and iii) the deposition of sedimentary basins. Since Middle Miocene, extension distributed over the whole Aegean domai...

  8. A Two-stage Discriminating Framework for Making Supply Chain Operation Decisions under Uncertainties

    OpenAIRE

    Gu, H; Rong, G

    2010-01-01

    This paper addresses the problem of making supply chain operation decisions for refineries under two types of uncertainties: demand uncertainty and incomplete information shared with suppliers and transport companies. Most of the literature only focus on one uncertainty or treat more uncertainties identically. However, we note that refineries have more power to control uncertainties in procurement and transportation than in demand in the real world. Thus, a two-stage framework for dealing wit...

  9. Low-noise SQUIDs with large transfer: two-stage SQUIDs based on DROSs

    NARCIS (Netherlands)

    Podt, M.; Flokstra, Jakob; Rogalla, Horst

    2002-01-01

    We have realized a two-stage integrated superconducting quantum interference device (SQUID) system with a closed loop bandwidth of 2.5 MHz, operated in a direct voltage readout mode. The corresponding flux slew rate was 1.3×105 Φ0/s and the measured white flux noise was 1.3 μΦ0/√Hz at 4.2 K. The

  10. Latent Inhibition as a Function of US Intensity in a Two-Stage CER Procedure

    Science.gov (United States)

    Rodriguez, Gabriel; Alonso, Gumersinda

    2004-01-01

    An experiment is reported in which the effect of unconditioned stimulus (US) intensity on latent inhibition (LI) was examined, using a two-stage conditioned emotional response (CER) procedure in rats. A tone was used as the pre-exposed and conditioned stimulus (CS), and a foot-shock of either a low (0.3 mA) or high (0.7 mA) intensity was used as…

  11. Two stage dual gate MESFET monolithic gain control amplifier for Ka-band

    Science.gov (United States)

    Sokolov, V.; Geddes, J.; Contolatis, A.

    A monolithic two stage gain control amplifier has been developed using submicron gate length dual gate MESFETs fabricated on ion implanted material. The amplifier has a gain of 12 dB at 30 GHz with a gain control range of over 30 dB. This ion implanted monolithic IC is readily integrable with other phased array receiver functions such as low noise amplifiers and phase shifters.

  12. Exergy analysis of vapor compression refrigeration cycle with two-stage and intercooler

    Science.gov (United States)

    Kılıç, Bayram

    2012-07-01

    In this study, exergy analyses of vapor compression refrigeration cycle with two-stage and intercooler using refrigerants R507, R407c, R404a were carried out. The necessary thermodynamic values for analyses were calculated by Solkane program. The coefficient of performance, exergetic efficiency and total irreversibility rate of the system in the different operating conditions for these refrigerants were investigated. The coefficient of performance, exergetic efficiency and total irreversibility rate for alternative refrigerants were compared.

  13. Exergy analysis of vapor compression refrigeration cycle with two-stage and intercooler

    Energy Technology Data Exchange (ETDEWEB)

    Kilic, Bayram [Mehmet Akif Ersoy University, Bucak Emin Guelmez Vocational School, Bucak, Burdur (Turkey)

    2012-07-15

    In this study, exergy analyses of vapor compression refrigeration cycle with two-stage and intercooler using refrigerants R507, R407c, R404a were carried out. The necessary thermodynamic values for analyses were calculated by Solkane program. The coefficient of performance, exergetic efficiency and total irreversibility rate of the system in the different operating conditions for these refrigerants were investigated. The coefficient of performance, exergetic efficiency and total irreversibility rate for alternative refrigerants were compared. (orig.)

  14. Performance of Combined Water Turbine Darrieus-Savonius with Two Stage Savonius Buckets and Single Deflector

    OpenAIRE

    Sahim, Kaprawi; Santoso, Dyos; Sipahutar, Riman

    2016-01-01

    The objective of this study is to show the effect of single deflector plate on the performance of combined Darrieus-Savonius water turbine. In order to overcome the disadvantages of low torque of solo Darrieus turbine, a plate deflector mounted in front of returning Savonius bucket of combined water turbine composing of Darrieus and Savonius rotor has been proposed in this study. Some configurations of combined turbines with two stage Savonius rotors were experimentally tested in a river of c...

  15. Perceived Health Benefits and Soy Consumption Behavior: Two-Stage Decision Model Approach

    OpenAIRE

    Moon, Wanki; Balasubramanian, Siva K.; Rimal, Arbindra

    2005-01-01

    A two-stage decision model is developed to assess the effect of perceived soy health benefits on consumers' decisions with respect to soy food. The first stage captures whether or not to consume soy food, while the second stage reflects how often to consume. A conceptual/analytical framework is also employed, combining Lancaster's characteristics model and Fishbein's multi-attribute model. Results show that perceived soy health benefits significantly influence both decision stages. Further, c...

  16. On the convexity of Relativistic Hydrodynamics

    CERN Document Server

    Ibáñez, José María; Martí, José María; Miralles, Juan Antonio; 10.1088/0264-9381/30/5/057002

    2013-01-01

    The relativistic hydrodynamic system of equations for a perfect fluid obeying a causal equation of state is hyperbolic (Anile 1989 {\\it Relativistic Fluids and Magneto-Fluids} (Cambridge: Cambridge University Press)). In this report, we derive the conditions for this system to be convex in terms of the fundamental derivative of the equation of state (Menikoff and Plohr 1989 {\\it Rev. Mod. Phys.} {\\bf 61} 75). The classical limit is recovered.

  17. Coefficient inequalities for starlikeness and convexity

    Directory of Open Access Journals (Sweden)

    Ali Rosihan M.

    2013-06-01

    Full Text Available For an analytic function $f(z=z+\\sum_{n=2}^\\infty a_n z^n$ satisfying the inequality $\\sum_{n=2}^\\infty n(n-1|a_n|\\leq \\beta$, sharp bound on $\\beta$ is determined so that $f$ is either starlike or convex of order $\\alpha$. Several other coefficient inequalities related to certain subclasses are also investigated.

  18. High quantum efficiency mid-wavelength interband cascade infrared photodetectors with one and two stages

    Science.gov (United States)

    Zhou, Yi; Chen, Jianxin; Xu, Zhicheng; He, Li

    2016-08-01

    In this paper, we report on mid-wavelength infrared interband cascade photodetectors grown on InAs substrates. We studied the transport properties of the photon-generated carriers in the interband cascade structures by comparing two different detectors, a single stage detector and a two-stage cascade detector. The two-stage device showed quantum efficiency around 19.8% at room temperature, and clear optical response was measured even at a temperature of 323 K. The two detectors showed similar Johnson-noise limited detectivity. The peak detectivity of the one- and two-stage devices was measured to be 2.15 × 1014 cm·Hz1/02/W and 2.19 × 1014 cm·Hz1/02/W at 80 K, 1.21 × 109 cm·Hz1/02/W and 1.23 × 109 cm·Hz1/02/W at 300 K, respectively. The 300 K background limited infrared performance (BLIP) operation temperature is estimated to be over 140 K.

  19. Development of Two-Stage Stirling Cooler for ASTRO-F

    Science.gov (United States)

    Narasaki, K.; Tsunematsu, S.; Ootsuka, K.; Kyoya, M.; Matsumoto, T.; Murakami, H.; Nakagawa, T.

    2004-06-01

    A two-stage small Stirling cooler has been developed and tested for the infrared astronomical satellite ASTRO-F that is planned to be launched by Japanese M-V rocket in 2005. ASTRO-F has a hybrid cryogenic system that is a combination of superfluid liquid helium (HeII) and two-stage Stirling coolers. The mechanical cooler has a two-stage displacer driven by a linear motor in a cold head and a new linear-ball-bearing system for the piston-supporting structure in a compressor. The linear-ball-bearing supporting system achieves the piston clearance seal, the long piston-stroke operation and the low frequency operation. The typical cooling power is 200 mW at 20 K and the total input power to the compressor and the cold head is below 90 W without driver electronics. The engineering, the prototype and the flight models of the cooler have been fabricated and evaluated to verify the capability for ASTRO-F. This paper describes the design of the cooler and the results from verification tests including cooler performance test, thermal vacuum test, vibration test and lifetime test.

  20. Performance analysis of RDF gasification in a two stage fluidized bed-plasma process.

    Science.gov (United States)

    Materazzi, M; Lettieri, P; Taylor, R; Chapman, C

    2016-01-01

    The major technical problems faced by stand-alone fluidized bed gasifiers (FBG) for waste-to gas applications are intrinsically related to the composition and physical properties of waste materials, such as RDF. The high quantity of ash and volatile material in RDF can provide a decrease in thermal output, create high ash clinkering, and increase emission of tars and CO2, thus affecting the operability for clean syngas generation at industrial scale. By contrast, a two-stage process which separates primary gasification and selective tar and ash conversion would be inherently more forgiving and stable. This can be achieved with the use of a separate plasma converter, which has been successfully used in conjunction with conventional thermal treatment units, for the ability to 'polish' the producer gas by organic contaminants and collect the inorganic fraction in a molten (and inert) state. This research focused on the performance analysis of a two-stage fluid bed gasification-plasma process to transform solid waste into clean syngas. Thermodynamic assessment using the two-stage equilibrium method was carried out to determine optimum conditions for the gasification of RDF and to understand the limitations and influence of the second stage on the process performance (gas heating value, cold gas efficiency, carbon conversion efficiency), along with other parameters. Comparison with a different thermal refining stage, i.e. thermal cracking (via partial oxidation) was also performed. The analysis is supported by experimental data from a pilot plant.

  1. Continuous removal of endocrine disruptors by versatile peroxidase using a two-stage system.

    Science.gov (United States)

    Taboada-Puig, Roberto; Lu-Chau, Thelmo A; Eibes, Gemma; Feijoo, Gumersindo; Moreira, Maria T; Lema, Juan M

    2015-01-01

    The oxidant Mn(3+) -malonate, generated by the ligninolytic enzyme versatile peroxidase in a two-stage system, was used for the continuous removal of endocrine disrupting compounds (EDCs) from synthetic and real wastewaters. One plasticizer (bisphenol-A), one bactericide (triclosan) and three estrogenic compounds (estrone, 17β-estradiol, and 17α-ethinylestradiol) were removed from wastewater at degradation rates in the range of 28-58 µg/L·min, with low enzyme inactivation. First, the optimization of three main parameters affecting the generation of Mn(3+) -malonate (hydraulic retention time as well as Na-malonate and H2 O2 feeding rates) was conducted following a response surface methodology (RSM). Under optimal conditions, the degradation of the EDCs was proven at high (1.3-8.8 mg/L) and environmental (1.2-6.1 µg/L) concentrations. Finally, when the two-stage system was compared with a conventional enzymatic membrane reactor (EMR) using the same enzyme, a 14-fold increase of the removal efficiency was observed. At the same time, operational problems found during EDCs removal in the EMR system (e.g., clogging of the membrane and enzyme inactivation) were avoided by physically separating the stages of complex formation and pollutant oxidation, allowing the system to be operated for a longer period (∼8 h). This study demonstrates the feasibility of the two-stage enzymatic system for removing EDCs both at high and environmental concentrations.

  2. A two-stage Stirling-type pulse tube cryocooler with a cold inertance tube

    Science.gov (United States)

    Gan, Z. H.; Fan, B. Y.; Wu, Y. Z.; Qiu, L. M.; Zhang, X. J.; Chen, G. B.

    2010-06-01

    A thermally coupled two-stage Stirling-type pulse tube cryocooler (PTC) with inertance tubes as phase shifters has been designed, manufactured and tested. In order to obtain a larger phase shift at the low acoustic power of about 2.0 W, a cold inertance tube as well as a cold reservoir for the second stage, precooled by the cold end of the first stage, was introduced into the system. The transmission line model was used to calculate the phase shift produced by the cold inertance tube. Effect of regenerator material, geometry and charging pressure on the performance of the second stage of the two-stage PTC was investigated based on the well known regenerator model REGEN. Experimental results of the two-stage PTC were carried out with an emphasis on the performance of the second stage. A lowest cooling temperature of 23.7 K and 0.50 W at 33.9 K were obtained with an input electric power of 150.0 W and an operating frequency of 40 Hz.

  3. Rehabilitation outcomes in patients with early and two-stage reconstruction of flexor tendon injuries.

    Science.gov (United States)

    Sade, Ilgin; İnanir, Murat; Şen, Suzan; Çakmak, Esra; Kablanoğlu, Serkan; Selçuk, Barin; Dursun, Nigar

    2016-08-01

    [Purpose] The primary aim of this study was to assess rehabilitation outcomes for early and two-stage repair of hand flexor tendon injuries. The secondary purpose of this study was to compare the findings between treatment groups. [Subjects and Methods] Twenty-three patients were included in this study. Early repair (n=14) and two-stage repair (n=9) groups were included in a rehabilitation program that used hand splints. This retrospective evaluated patients according to their demographic characteristics, including age, gender, injured hand, dominant hand, cause of injury, zone of injury, number of affected fingers, and accompanying injuries. Pain, range of motion, and grip strength were evaluated using a visual analog scale, goniometer, and dynamometer, respectively. [Results] Both groups showed significant improvements in pain and finger flexion after treatment compared with baseline measurements. However, no significant differences were observed between the two treatment groups. Similar results were obtained for grip strength and pinch grip, whereas gross grip was better in the early tendon repair group. [Conclusion] Early and two-stage reconstruction of patients with flexor tendon injuries can be performed with similarly favorable responses and effective rehabilitation programs.

  4. A Comparison of Direct and Two-Stage Transportation of Patients to Hospital in Poland

    Directory of Open Access Journals (Sweden)

    Anna Rosiek

    2015-04-01

    Full Text Available Background: The rapid international expansion of telemedicine reflects the growth of technological innovations. This technological advancement is transforming the way in which patients can receive health care. Materials and Methods: The study was conducted in Poland, at the Department of Cardiology of the Regional Hospital of Louis Rydygier in Torun. The researchers analyzed the delay in the treatment of patients with acute coronary syndrome. The study was conducted as a survey and examined 67 consecutively admitted patients treated invasively in a two-stage transport system. Data were analyzed statistically. Results: Two-stage transportation does not meet the timeframe guidelines for the treatment of patients with acute myocardial infarction. Intervals for the analyzed group of patients were statistically significant (p < 0.0001. Conclusions: Direct transportation of the patient to a reference center with interventional cardiology laboratory has a significant impact on reducing in-hospital delay in case of patients with acute coronary syndrome. Perspectives: This article presents the results of two-stage transportation of the patient with acute coronary syndrome. This measure could help clinicians who seek to assess time needed for intervention. It also shows how time from the beginning of pain in chest is important and may contribute to patient disability, death or well-being.

  5. Two-Stage Liver Transplantation with Temporary Porto-Middle Hepatic Vein Shunt

    Directory of Open Access Journals (Sweden)

    Giovanni Varotti

    2010-01-01

    Full Text Available Two-stage liver transplantation (LT has been reported for cases of fulminant liver failure that can lead to toxic hepatic syndrome, or massive hemorrhages resulting in uncontrollable bleeding. Technically, the first stage of the procedure consists of a total hepatectomy with preservation of the recipient's inferior vena cava (IVC, followed by the creation of a temporary end-to-side porto-caval shunt (TPCS. The second stage consists of removing the TPCS and implanting a liver graft when one becomes available. We report a case of a two-stage total hepatectomy and LT in which a temporary end-to-end anastomosis between the portal vein and the middle hepatic vein (TPMHV was performed as an alternative to the classic end-to-end TPCS. The creation of a TPMHV proved technically feasible and showed some advantages compared to the standard TPCS. In cases in which a two-stage LT with side-to-side caval reconstruction is utilized, TPMHV can be considered as a safe and effective alternative to standard TPCS.

  6. Two-stage residual inclusion estimation: addressing endogeneity in health econometric modeling.

    Science.gov (United States)

    Terza, Joseph V; Basu, Anirban; Rathouz, Paul J

    2008-05-01

    The paper focuses on two estimation methods that have been widely used to address endogeneity in empirical research in health economics and health services research-two-stage predictor substitution (2SPS) and two-stage residual inclusion (2SRI). 2SPS is the rote extension (to nonlinear models) of the popular linear two-stage least squares estimator. The 2SRI estimator is similar except that in the second-stage regression, the endogenous variables are not replaced by first-stage predictors. Instead, first-stage residuals are included as additional regressors. In a generic parametric framework, we show that 2SRI is consistent and 2SPS is not. Results from a simulation study and an illustrative example also recommend against 2SPS and favor 2SRI. Our findings are important given that there are many prominent examples of the application of inconsistent 2SPS in the recent literature. This study can be used as a guide by future researchers in health economics who are confronted with endogeneity in their empirical work.

  7. Two-stage solar concentrators based on parabolic troughs: asymmetric versus symmetric designs.

    Science.gov (United States)

    Schmitz, Max; Cooper, Thomas; Ambrosetti, Gianluca; Steinfeld, Aldo

    2015-11-20

    While nonimaging concentrators can approach the thermodynamic limit of concentration, they generally suffer from poor compactness when designed for small acceptance angles, e.g., to capture direct solar irradiation. Symmetric two-stage systems utilizing an image-forming primary parabolic concentrator in tandem with a nonimaging secondary concentrator partially overcome this compactness problem, but their achievable concentration ratio is ultimately limited by the central obstruction caused by the secondary. Significant improvements can be realized by two-stage systems having asymmetric cross-sections, particularly for 2D line-focus trough designs. We therefore present a detailed analysis of two-stage line-focus asymmetric concentrators for flat receiver geometries and compare them to their symmetric counterparts. Exemplary designs are examined in terms of the key optical performance metrics, namely, geometric concentration ratio, acceptance angle, concentration-acceptance product, aspect ratio, active area fraction, and average number of reflections. Notably, we show that asymmetric designs can achieve significantly higher overall concentrations and are always more compact than symmetric systems designed for the same concentration ratio. Using this analysis as a basis, we develop novel asymmetric designs, including two-wing and nested configurations, which surpass the optical performance of two-mirror aplanats and are comparable with the best reported 2D simultaneous multiple surface designs for both hollow and dielectric-filled secondaries.

  8. Industrial demonstration plant for the gasification of herb residue by fluidized bed two-stage process.

    Science.gov (United States)

    Zeng, Xi; Shao, Ruyi; Wang, Fang; Dong, Pengwei; Yu, Jian; Xu, Guangwen

    2016-04-01

    A fluidized bed two-stage gasification process, consisting of a fluidized-bed (FB) pyrolyzer and a transport fluidized bed (TFB) gasifier, has been proposed to gasify biomass for fuel gas production with low tar content. On the basis of our previous fundamental study, an autothermal two-stage gasifier has been designed and built for gasify a kind of Chinese herb residue with a treating capacity of 600 kg/h. The testing data in the operational stable stage of the industrial demonstration plant showed that when keeping the reaction temperatures of pyrolyzer and gasifier respectively at about 700 °C and 850 °C, the heating value of fuel gas can reach 1200 kcal/Nm(3), and the tar content in the produced fuel gas was about 0.4 g/Nm(3). The results from this pilot industrial demonstration plant fully verified the feasibility and technical features of the proposed FB two-stage gasification process.

  9. Study on two stage activated carbon/HFC-134a based adsorption chiller

    Science.gov (United States)

    >K Habib,

    2013-06-01

    In this paper, a theoretical analysis on the performance of a thermally driven two-stage four-bed adsorption chiller utilizing low-grade waste heat of temperatures between 50°C and 70°C in combination with a heat sink (cooling water) of 30°C for air-conditioning applications has been described. Activated carbon (AC) of type Maxsorb III/HFC-134a pair has been examined as an adsorbent/refrigerant pair. FORTRAN simulation program is developed to analyze the influence of operating conditions (hot and cooling water temperatures and adsorption/desorption cycle times) on the cycle performance in terms of cooling capacity and COP. The main advantage of this two-stage chiller is that it can be operational with smaller regenerating temperature lifts than other heat-driven single-stage chillers. Simulation results shows that the two-stage chiller can be operated effectively with heat sources of 50°C and 70°C in combination with a coolant at 30°C.

  10. Effects of earthworm casts and zeolite on the two-stage composting of green waste

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Lu, E-mail: zhanglu1211@gmail.com; Sun, Xiangyang, E-mail: xysunbjfu@gmail.com

    2015-05-15

    Highlights: • Earthworm casts (EWCs) and clinoptilolite (CL) were used in green waste composting. • Addition of EWCs + CL improved physico-chemical and microbiological properties. • Addition of EWCs + CL extended the duration of thermophilic periods during composting. • Addition of EWCs + CL enhanced humification, cellulose degradation, and nutrients. • Combined addition of 0.30% EWCs + 25% CL reduced composting time to 21 days. - Abstract: Because it helps protect the environment and encourages economic development, composting has become a viable method for organic waste disposal. The objective of this study was to investigate the effects of earthworm casts (EWCs) (at 0.0%, 0.30%, and 0.60%) and zeolite (clinoptilolite, CL) (at 0%, 15%, and 25%) on the two-stage composting of green waste. The combination of EWCs and CL improved the conditions of the composting process and the quality of the compost products in terms of the thermophilic phase, humification, nitrification, microbial numbers and enzyme activities, the degradation of cellulose and hemicellulose, and physico-chemical characteristics and nutrient contents of final composts. The compost matured in only 21 days with the optimized two-stage composting method rather than in the 90–270 days required for traditional composting. The optimal two-stage composting and the best quality compost were obtained with 0.30% EWCs and 25% CL.

  11. A Two-stage injection-locked magnetron for accelerators with superconducting cavities

    CERN Document Server

    Kazakevich, Grigory; Flanagan, Gene; Marhauser, Frank; Neubauer, Mike; Yakovlev, Vyacheslav; Chase, Brian; Nagaitsev, Sergey; Pasquinelli, Ralph; Solyak, Nikolay; Tupikov, Vitali; Wolff, Daniel

    2013-01-01

    A concept for a two-stage injection-locked CW magnetron intended to drive Superconducting Cavities (SC) for intensity-frontier accelerators has been proposed. The concept considers two magnetrons in which the output power differs by 15-20 dB and the lower power magnetron being frequency-locked from an external source locks the higher power magnetron. The injection-locked two-stage CW magnetron can be used as an RF power source for Fermilab's Project-X to feed separately each of the 1.3 GHz SC of the 8 GeV pulsed linac. We expect output/locking power ratio of about 30-40 dB assuming operation in a pulsed mode with pulse duration of ~ 8 ms and repetition rate of 10 Hz. The experimental setup of a two-stage magnetron utilising CW, S-band, 1 kW tubes operating at pulse duration of 1-10 ms, and the obtained results are presented and discussed in this paper.

  12. Study on the Control Algorithm of Two-Stage DC-DC Converter for Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Changhao Piao

    2014-01-01

    Full Text Available The fast response, high efficiency, and good reliability are very important characteristics to electric vehicles (EVs dc/dc converters. Two-stage dc-dc converter is a kind of dc-dc topologies that can offer those characteristics to EVs. Presently, nonlinear control is an active area of research in the field of the control algorithm of dc-dc converters. However, very few papers research on two-stage converter for EVs. In this paper, a fixed switching frequency sliding mode (FSFSM controller and double-integral sliding mode (DISM controller for two-stage dc-dc converter are proposed. And a conventional linear control (lag is chosen as the comparison. The performances of the proposed FSFSM controller are compared with those obtained by the lag controller. In consequence, the satisfactory simulation and experiment results show that the FSFSM controller is capable of offering good large-signal operations with fast dynamical responses to the converter. At last, some other simulation results are presented to prove that the DISM controller is a promising method for the converter to eliminate the steady-state error.

  13. When is multidimensional screening a convex program?

    CERN Document Server

    Figalli, Alessio; McCann, Robert J

    2009-01-01

    A principal wishes to transact business with a multidimensional distribution of agents whose preferences are known only in the aggregate. Assuming a twist (= generalized Spence-Mirrlees single-crossing) hypothesis and that agents can choose only pure strategies, we identify a structural condition on the preference b(x,y) of agent type x for product type y -- and on the principal's costs c(y) -- which is necessary and sufficient for reducing the profit maximization problem faced by the principal to a convex program. This is a key step toward making the principal's problem theoretically and computationally tractable; in particular, it allows us to derive uniqueness and stability of the principal's optimum strategy -- and similarly of the strategy maximizing the expected welfare of the agents when the principal's profitability is constrained. We call this condition non-negative cross-curvature: it is also (i) necessary and sufficient to guarantee convexity of the set of b-convex functions, (ii) invariant under r...

  14. On convex relaxation of graph isomorphism.

    Science.gov (United States)

    Aflalo, Yonathan; Bronstein, Alexander; Kimmel, Ron

    2015-03-10

    We consider the problem of exact and inexact matching of weighted undirected graphs, in which a bijective correspondence is sought to minimize a quadratic weight disagreement. This computationally challenging problem is often relaxed as a convex quadratic program, in which the space of permutations is replaced by the space of doubly stochastic matrices. However, the applicability of such a relaxation is poorly understood. We define a broad class of friendly graphs characterized by an easily verifiable spectral property. We prove that for friendly graphs, the convex relaxation is guaranteed to find the exact isomorphism or certify its inexistence. This result is further extended to approximately isomorphic graphs, for which we develop an explicit bound on the amount of weight disagreement under which the relaxation is guaranteed to find the globally optimal approximate isomorphism. We also show that in many cases, the graph matching problem can be further harmlessly relaxed to a convex quadratic program with only n separable linear equality constraints, which is substantially more efficient than the standard relaxation involving n2 equality and n2 inequality constraints. Finally, we show that our results are still valid for unfriendly graphs if additional information in the form of seeds or attributes is allowed, with the latter satisfying an easy to verify spectral characteristic.

  15. A Second Chance School in Hungary

    Science.gov (United States)

    Limbacher, Laszlo

    2008-01-01

    Hungary's "Belvarosi Tanoda" Secondary School offers an informal, flexible environment and alternative teaching methods for students who have had problems in other schools. The "Belvarosi Tanoda" (which translates as downtown school) is a second chance school for students who have dropped out of upper secondary education. It…

  16. Different Interpretations of Chance by Brazilian Adults.

    Science.gov (United States)

    Damasceno, Jose Elias; Dias, Ana Lucia Braz

    This paper investigates the meanings of the word "chance" in adult education. A questionnaire for assessing the level of probability understanding was administered to students in three countries--Canada, Brazil, and Hungary. Of the 18 questions on the questionnaire, four concerned language use. This paper reports on data relative to one of those…

  17. Can Lifelong Learning Reshape Life Chances?

    Science.gov (United States)

    Evans, Karen; Schoon, Ingrid; Weale, Martin

    2013-01-01

    Despite the expansion of post-school education and incentives to participate in lifelong learning, institutions and labour markets continue to interlock in shaping life chances according to starting social position, family and private resources. The dominant view that the economic and social returns to public investment in adult learning are too…

  18. Extreme properties of quermassintegrals of convex bodies

    Institute of Scientific and Technical Information of China (English)

    LENG; Gangsong

    2001-01-01

    [1]Ball,K.,Shadows of convex bodies,Trans.Amer.Math.Soc.,1991,327:891-901.[2]Lutwak,E.,Mixed projection inequalities,Trans.Amer.Math.Soc.,1985,287:92-106.[3]Bourgain,J.,Lindenstrauss,J.,Projection bodies,Israel Seminar (G.A.F.A) 1986-1987,Lecture Notes in Math.Vol.1317,Berlin-New York:Springer-Verlag,1988,250-269.[4]Chakerian,G.D.,Lutwak,E.,Bodies with similar projections,Trans.Amer.Math.Soc.,1997,349:1811-1820.[5]Schneider,R.,Weil,W.,Zonoids and related topics,Convexity and its Applications (eds.Gruber,P.M.,Wills,J.M.),Basel:Birkhuser,1983,296-316.[6]Schneider,R.,Convex Bodies:the Brunn-Minkowski Theory,Cambridge:Cambridge University Press,1993.[7]Schneider,R.,On the determination of convex bodies by projection and girth functions,Result Math.,1998,33:155-160.[8]Thompson,A.C.,Minkowski Geometry,Cambridge:Cambridge University Press,1996.[9]Petty,C.M.,Projection bodies,in Proceedings,Coll Convexity,Copenhagen,1965,Kbenhavns Univ.Mat.Inst.,1967,234-241.[10]Schneider,R.,Zu einem problem von Shephard über die projectionen konvexer kirper,Math.Z.,1967,101:71-81.[11]Ball,K.,Volume ratios and a reverse isoprimetric inequalitity,J.London Math.Soc.,1991,44(2):351-359.[12]Gardner,R.J.,Intersection bodies and the Busemann-Petty problem,Trans.Amer.Math.Soc.,1994,342:435-445.[13]Gardner,R.J.,A positive answer to the Busemann-petty problem in three dimensions,Annals of Math.,1994,140:435-447.[14]Grinberg,E.L.,Isoperimetric inequalities and identities fork-dimensional cross-sections of convex bodies,Math.Ann.,1991,291:75-86.[15]Goodey,P.,Schneider,R.,Weil,W.,On the determination of convex bodies by projection functions,Bull.London Math.Soc.,1997,29:82-88.[16]Lutwak,E.,Intersection bodies and dual mixed volumes,Adv.Math.,1988,71:232-261.[17]Zhang,G.,Centered bodies and dual mixed volumes,Trans.Amer.Soc.,1994,345:777-801.[18]Zhang,G.,Dual Kinematic formulas,Trans.Amer.Soc.,1999,351:985-995.[19

  19. Optimal production lot size and reorder point of a two-stage supply chain while random demand is sensitive with sales teams' initiatives

    Science.gov (United States)

    Sankar Sana, Shib

    2016-01-01

    The paper develops a production-inventory model of a two-stage supply chain consisting of one manufacturer and one retailer to study production lot size/order quantity, reorder point sales teams' initiatives where demand of the end customers is dependent on random variable and sales teams' initiatives simultaneously. The manufacturer produces the order quantity of the retailer at one lot in which the procurement cost per unit quantity follows a realistic convex function of production lot size. In the chain, the cost of sales team's initiatives/promotion efforts and wholesale price of the manufacturer are negotiated at the points such that their optimum profits reached nearer to their target profits. This study suggests to the management of firms to determine the optimal order quantity/production quantity, reorder point and sales teams' initiatives/promotional effort in order to achieve their maximum profits. An analytical method is applied to determine the optimal values of the decision variables. Finally, numerical examples with its graphical presentation and sensitivity analysis of the key parameters are presented to illustrate more insights of the model.

  20. Two-Stage Power Factor Corrected Power Supplies: The Low Component-Stress Approach

    DEFF Research Database (Denmark)

    Petersen, Lars; Andersen, Michael Andreas E.

    2002-01-01

    The discussion concerning the use of single-stage contra two-stage PFC solutions has been going on for the last decade and it continues. The purpose of this paper is to direct the focus back on how the power is processed and not so much as to the number of stages or the amount of power processed....... The performance of the basic DC/DC topologies is reviewed with focus on the component stress. The knowledge obtained in this process is used to review some examples of the alternative PFC solutions and compare these solutions with the basic twostage PFC solution....

  1. Generalized Yule-walker and two-stage identification algorithms for dual-rate systems

    Institute of Scientific and Technical Information of China (English)

    Feng DING

    2006-01-01

    In this paper, two approaches are developed for directly identifying single-rate models of dual-rate stochastic systems in which the input updating frequency is an integer multiple of the output sampling frequency. The first is the generalized Yule-Walker algorithm and the second is a two-stage algorithm based on the correlation technique. The basic idea is to directly identify the parameters of underlying single-rate models instead of the lifted models of dual-rate systems from the dual-rate input-output data, assuming that the measurement data are stationary and ergodic. An example is given.

  2. Two-stage bargaining with coverage extension in a dual labour market

    DEFF Research Database (Denmark)

    Roberts, Mark A.; Stæhr, Karsten; Tranæs, Torben

    2000-01-01

    in extending coverage of a minimum wage to the non-union sector. Furthermore, the union sector does not seek to increase the non-union wage to a level above the market-clearing wage. In fact, it is optimal for the union sector to impose a market-clearing wage on the non-union sector. Finally, coverage......This paper studies coverage extension in a simple general equilibrium model with a dual labour market. The union sector is characterized by two-stage bargaining whereas the firms set wages in the non-union sector. In this model firms and unions of the union sector have a commonality of interest...

  3. SQL/JavaScript Hybrid Worms As Two-stage Quines

    CERN Document Server

    Orlicki, José I

    2009-01-01

    Delving into present trends and anticipating future malware trends, a hybrid, SQL on the server-side, JavaScript on the client-side, self-replicating worm based on two-stage quines was designed and implemented on an ad-hoc scenario instantiating a very common software pattern. The proof of concept code combines techniques seen in the wild, in the form of SQL injections leading to cross-site scripting JavaScript inclusion, and seen in the laboratory, in the form of SQL quines propa- gated via RFIDs, resulting in a hybrid code injection. General features of hybrid worms are also discussed.

  4. Two stage DOA and Fundamental Frequency Estimation based on Subspace Techniques

    DEFF Research Database (Denmark)

    Zhou, Zhenhua; Christensen, Mads Græsbøll; So, Hing-Cheung

    2012-01-01

    optimally weighted harmonic multiple signal classification (MCOW-HMUSIC) estimator is devised for the estimation of fundamental frequencies. Secondly, the spatio- temporal multiple signal classification (ST-MUSIC) estimator is proposed for the estimation of DOA with the estimated frequencies. Statistical......In this paper, the problem of fundamental frequency and direction-of-arrival (DOA) estimation for multi-channel harmonic sinusoidal signal is addressed. The estimation procedure consists of two stages. Firstly, by making use of the subspace technique and Markov-based eigenanalysis, a multi- channel...... evaluation with synthetic signals shows the high accuracy of the proposed methods compared with their non-weighting versions....

  5. Performance of the SITP 35K two-stage Stirling cryocooler

    Science.gov (United States)

    Liu, Dongyu; Li, Ao; Li, Shanshan; Wu, Yinong

    2010-04-01

    This paper presents the design, development, optimization experiment and performance of the SITP two-stage Stirling cryocooler. The geometry size of the cooler, especially the diameter and length of the regenerator were analyzed. Operating parameters by experiments were optimized to maximize the second stage cooling performance. In the test the cooler was operated at various drive frequency, phase shift between displacer and piston, fill pressure. The experimental results indicate that the cryocooler has a higher efficiency with a performance of 0.85W at 35K with a compressor input power of 56W at a phase shift of 65°, an operating frequency of 40Hz, 1MPa fill pressure.

  6. Two-Stage Bulk Electron Heating in the Diffusion Region of Anti-Parallel Symmetric Reconnection

    CERN Document Server

    Le, Ari; Daughton, William

    2016-01-01

    Electron bulk energization in the diffusion region during anti-parallel symmetric reconnection entails two stages. First, the inflowing electrons are adiabatically trapped and energized by an ambipolar parallel electric field. Next, the electrons gain energy from the reconnection electric field as they undergo meandering motion. These collisionless mechanisms have been decribed previously, and they lead to highly-structured electron velocity distributions. Nevertheless, a simplified control-volume analysis gives estimates for how the net effective heating scales with the upstream plasma conditions in agreement with fully kinetic simulations and spacecraft observations.

  7. Use of two-stage membrane countercurrent cascade for natural gas purification from carbon dioxide

    Science.gov (United States)

    Kurchatov, I. M.; Laguntsov, N. I.; Karaseva, M. D.

    2016-09-01

    Membrane technology scheme is offered and presented as a two-stage countercurrent recirculating cascade, in order to solve the problem of natural gas dehydration and purification from CO2. The first stage is a single divider, and the second stage is a recirculating two-module divider. This scheme allows natural gas to be cleaned from impurities, with any desired degree of methane extraction. In this paper, the optimal values of the basic parameters of the selected technological scheme are determined. An estimation of energy efficiency was carried out, taking into account the energy consumption of interstage compressor and methane losses in energy units.

  8. Forecasting long memory series subject to structural change: A two-stage approach

    DEFF Research Database (Denmark)

    Papailias, Fotis; Dias, Gustavo Fruet

    2015-01-01

    A two-stage forecasting approach for long memory time series is introduced. In the first step, we estimate the fractional exponent and, by applying the fractional differencing operator, obtain the underlying weakly dependent series. In the second step, we produce multi-step-ahead forecasts...... for the weakly dependent series and obtain their long memory counterparts by applying the fractional cumulation operator. The methodology applies to both stationary and nonstationary cases. Simulations and an application to seven time series provide evidence that the new methodology is more robust to structural...... change and yields good forecasting results....

  9. Space Station Freedom carbon dioxide removal assembly two-stage rotary sliding vane pump

    Science.gov (United States)

    Matteau, Dennis

    1992-07-01

    The design and development of a positive displacement pump selected to operate as an essential part of the carbon dioxide removal assembly (CDRA) are described. An oilless two-stage rotary sliding vane pump was selected as the optimum concept to meet the CDRA application requirements. This positive displacement pump is characterized by low weight and small envelope per unit flow, ability to pump saturated gases and moderate amount of liquid, small clearance volumes, and low vibration. It is easily modified to accommodate several stages on a single shaft optimizing space and weight, which makes the concept ideal for a range of demanding space applications.

  10. Two-Stage Maximum Likelihood Estimation (TSMLE for MT-CDMA Signals in the Indoor Environment

    Directory of Open Access Journals (Sweden)

    Sesay Abu B

    2004-01-01

    Full Text Available This paper proposes a two-stage maximum likelihood estimation (TSMLE technique suited for multitone code division multiple access (MT-CDMA system. Here, an analytical framework is presented in the indoor environment for determining the average bit error rate (BER of the system, over Rayleigh and Ricean fading channels. The analytical model is derived for quadrature phase shift keying (QPSK modulation technique by taking into account the number of tones, signal bandwidth (BW, bit rate, and transmission power. Numerical results are presented to validate the analysis, and to justify the approximations made therein. Moreover, these results are shown to agree completely with those obtained by simulation.

  11. Two-Stage Electric Vehicle Charging Coordination in Low Voltage Distribution Grids

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2014-01-01

    Increased environmental awareness in the recent years has encouraged rapid growth of renewable energy sources (RESs); especially solar PV and wind. One of the effective solutions to compensate intermittencies in generation from the RESs is to enable consumer participation in demand response (DR......). Being a sizable rated element, electric vehicles (EVs) can offer a great deal of demand flexibility in future intelligent grids. This paper first investigates and analyzes driving pattern and charging requirements of EVs. Secondly, a two-stage charging algorithm, namely local adaptive control...

  12. Health care planning and education via gaming-simulation: a two-stage experiment.

    Science.gov (United States)

    Gagnon, J H; Greenblat, C S

    1977-01-01

    A two-stage process of gaming-simulation design was conducted: the first stage of design concerned national planning for hemophilia care; the second stage of design was for gaming-simulation concerning the problems of hemophilia patients and health care providers. The planning design was intended to be adaptable to large-scale planning for a variety of health care problems. The educational game was designed using data developed in designing the planning game. A broad range of policy-makers participated in the planning game.

  13. Influence of capacity- and time-constrained intermediate storage in two-stage food production systems

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter; Gaalman, Gerard

    2007-01-01

    In food processing, two-stage production systems with a batch processor in the first stage and packaging lines in the second stage are common and mostly separated by capacity- and time-constrained intermediate storage. This combination of constraints is common in practice, but the literature hardly...... of systems like this. Contrary to the common sense in operations management, the LPT rule is able to maximize the total production volume per day. Furthermore, we show that adding one tank has considerable effects. Finally, we conclude that the optimal setup frequency for batches in the first stage...

  14. The global stability of a delayed predator-prey system with two stage-structure

    Energy Technology Data Exchange (ETDEWEB)

    Wang Fengyan [College of Science, Jimei University, Xiamen Fujian 361021 (China)], E-mail: wangfy68@163.com; Pang Guoping [Department of Mathematics and Computer Science, Yulin Normal University, Yulin Guangxi 537000 (China)

    2009-04-30

    Based on the classical delayed stage-structured model and Lotka-Volterra predator-prey model, we introduce and study a delayed predator-prey system, where prey and predator have two stages, an immature stage and a mature stage. The time delays are the time lengths between the immature's birth and maturity of prey and predator species. Results on global asymptotic stability of nonnegative equilibria of the delay system are given, which generalize and suggest that good continuity exists between the predator-prey system and its corresponding stage-structured system.

  15. A Two-Stage Assembly-Type Flowshop Scheduling Problem for Minimizing Total Tardiness

    Directory of Open Access Journals (Sweden)

    Ju-Yong Lee

    2016-01-01

    Full Text Available This research considers a two-stage assembly-type flowshop scheduling problem with the objective of minimizing the total tardiness. The first stage consists of two independent machines, and the second stage consists of a single machine. Two types of components are fabricated in the first stage, and then they are assembled in the second stage. Dominance properties and lower bounds are developed, and a branch and bound algorithm is presented that uses these properties and lower bounds as well as an upper bound obtained from a heuristic algorithm. The algorithm performance is evaluated using a series of computational experiments on randomly generated instances and the results are reported.

  16. Biomass waste gasification - can be the two stage process suitable for tar reduction and power generation?

    Science.gov (United States)

    Sulc, Jindřich; Stojdl, Jiří; Richter, Miroslav; Popelka, Jan; Svoboda, Karel; Smetana, Jiří; Vacek, Jiří; Skoblja, Siarhei; Buryan, Petr

    2012-04-01

    A pilot scale gasification unit with novel co-current, updraft arrangement in the first stage and counter-current downdraft in the second stage was developed and exploited for studying effects of two stage gasification in comparison with one stage gasification of biomass (wood pellets) on fuel gas composition and attainable gas purity. Significant producer gas parameters (gas composition, heating value, content of tar compounds, content of inorganic gas impurities) were compared for the two stage and the one stage method of the gasification arrangement with only the upward moving bed (co-current updraft). The main novel features of the gasifier conception include grate-less reactor, upward moving bed of biomass particles (e.g. pellets) by means of a screw elevator with changeable rotational speed and gradual expanding diameter of the cylindrical reactor in the part above the upper end of the screw. The gasifier concept and arrangement are considered convenient for thermal power range 100-350 kW(th). The second stage of the gasifier served mainly for tar compounds destruction/reforming by increased temperature (around 950°C) and for gasification reaction of the fuel gas with char. The second stage used additional combustion of the fuel gas by preheated secondary air for attaining higher temperature and faster gasification of the remaining char from the first stage. The measurements of gas composition and tar compound contents confirmed superiority of the two stage gasification system, drastic decrease of aromatic compounds with two and higher number of benzene rings by 1-2 orders. On the other hand the two stage gasification (with overall ER=0.71) led to substantial reduction of gas heating value (LHV=3.15 MJ/Nm(3)), elevation of gas volume and increase of nitrogen content in fuel gas. The increased temperature (>950°C) at the entrance to the char bed caused also substantial decrease of ammonia content in fuel gas. The char with higher content of ash leaving the

  17. Two-stage continuous fermentation of Saccharomycopsis fibuligeria and Candida utilis.

    Science.gov (United States)

    Admassu, W; Korus, R A; Heimsch, R C

    1983-11-01

    Biomass production and carbohydrate reduction were determined for a two-stage continuous fermentation process with a simulated potato processing waste feed. The amylolytic yeast Saccharomycopsis fibuligera was grown in the first stage and a mixed culture of S. fibuligera and Candida utilis was maintained in the second stage. All conditions for the first and second stages were fixed except the flow of medium to the second stage was varied. Maximum biomass production occurred at a second stage dilution rate, D(2), of 0.27 h (-1). Carbohydrate reduction was inversely proportional to D(2), between 0.10 and 0.35 h (-1).

  18. Structural requirements and basic design concepts for a two-stage winged launcher system (Saenger)

    Science.gov (United States)

    Kuczera, H.; Keller, K.; Kunz, R.

    1988-10-01

    An evaluation is made of materials and structures technologies deemed capable of increasing the mass fraction-to-orbit of the Saenger two-stage launcher system while adequately addressing thermal-control and cryogenic fuel storage insulation problems. Except in its leading edges, nose cone, and airbreathing propulsion system air intakes, Ti alloy-based materials will be the basis of the airframe primary structure. Lightweight metallic thermal-protection measures will be employed. Attention is given to the design of the large lower stage element of Saenger.

  19. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

    OpenAIRE

    Ladan Jamshidy; Hamid Reza Mozaffari; Payam Faraji; Roohollah Sharifi

    2016-01-01

    Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with ...

  20. An Investigation on the Formation of Carbon Nanotubes by Two-Stage Chemical Vapor Deposition

    Directory of Open Access Journals (Sweden)

    M. S. Shamsudin

    2012-01-01

    Full Text Available High density of carbon nanotubes (CNTs has been synthesized from agricultural hydrocarbon: camphor oil using a one-hour synthesis time and a titanium dioxide sol gel catalyst. The pyrolysis temperature is studied in the range of 700–900°C at increments of 50°C. The synthesis process is done using a custom-made two-stage catalytic chemical vapor deposition apparatus. The CNT characteristics are investigated by field emission scanning electron microscopy and micro-Raman spectroscopy. The experimental results showed that structural properties of CNT are highly dependent on pyrolysis temperature changes.

  1. FORMATION OF HIGHLY RESISTANT CARBIDE AND BORIDE COATINGS BY A TWO-STAGE DEPOSITION METHOD

    Directory of Open Access Journals (Sweden)

    W. I. Sawich

    2011-01-01

    Full Text Available A study was made of the aspects of forming highly resistant coatings in the surface zone of tool steels and solid carbide inserts by a two-stage method. at the first stage of the method, pure Ta or Nb coatings were electrodeposited on samples of tool steel and solid carbide insert in a molten salt bath containing Ta and Nb fluorides. at the second stage, the electrodeposited coating of Ta (Nb was subjected to carburizing or boriding to form carbide (TaC, NbC or boride (TaB, NbB cladding layers.

  2. A Mean Point Based Convex Hull Computation Algorithm

    Directory of Open Access Journals (Sweden)

    Digvijay Singh

    2016-11-01

    Full Text Available The optimal solution of a Linear Programming problem (LPP is a basic feasible solution and all basic feasible solutions are extreme or boundary points of a convex region formed by the constraint functions of the LPP. In fact, the feasible solution space is not always a convex set so the verification of extreme points for optimality is quite difficult. In order to cover the non-convex feasible points within a convex set, a convex hull is imagined so that the extreme or boundary points may be checked for evaluation of the optimum solution in the decision-making process. In this article a computer assisted convex hull computation algorithm using the Mean Point and Python code verified results of the designed algorithm are discussed.

  3. Convex functions and optimization methods on Riemannian manifolds

    CERN Document Server

    Udrişte, Constantin

    1994-01-01

    This unique monograph discusses the interaction between Riemannian geometry, convex programming, numerical analysis, dynamical systems and mathematical modelling. The book is the first account of the development of this subject as it emerged at the beginning of the 'seventies. A unified theory of convexity of functions, dynamical systems and optimization methods on Riemannian manifolds is also presented. Topics covered include geodesics and completeness of Riemannian manifolds, variations of the p-energy of a curve and Jacobi fields, convex programs on Riemannian manifolds, geometrical constructions of convex functions, flows and energies, applications of convexity, descent algorithms on Riemannian manifolds, TC and TP programs for calculations and plots, all allowing the user to explore and experiment interactively with real life problems in the language of Riemannian geometry. An appendix is devoted to convexity and completeness in Finsler manifolds. For students and researchers in such diverse fields as pu...

  4. Jacques Monod and Chance and Necessity.

    Science.gov (United States)

    Ribatti, Domenico

    2015-01-01

    Charles Darwin proposed the theory that evolution of live organisms is based on random variation and natural selection. Jacques Monod, in his classic book Chance and Necessity, published 45 years ago, presented his thesis that the biosphere does not contain a predictable class of objects or events, but constitutes a particular occurrence, compatible indeed with the first principles but not deducible from those principles. The biosphere is therefore essentially unpredictable. In his book, Monod expounded at length on the conflict between science and religion. He saw religion as a collection of primitive myths that had been blown to shreds by science. At every turn, Monod emphasized the role of chance in human existence, an idea that is antithetical to essentially every religious doctrine that places humans as some inevitable intention of a Creator.

  5. On the modulus of U-convexity

    Directory of Open Access Journals (Sweden)

    Satit Saejung

    2005-01-01

    Full Text Available We prove that the moduli of U-convexity, introduced by Gao (1995, of the ultrapower X˜ of a Banach space X and of X itself coincide whenever X is super-reflexive. As a consequence, some known results have been proved and improved. More precisely, we prove that uX(1>0 implies that both X and the dual space X∗ of X have uniform normal structure and hence the “worth” property in Corollary 7 of Mazcuñán-Navarro (2003 can be discarded.

  6. Convex and Radially Concave Contoured Distributions

    Directory of Open Access Journals (Sweden)

    Wolf-Dieter Richter

    2015-01-01

    Full Text Available Integral representations of the locally defined star-generalized surface content measures on star spheres are derived for boundary spheres of balls being convex or radially concave with respect to a fan in Rn. As a result, the general geometric measure representation of star-shaped probability distributions and the general stochastic representation of the corresponding random vectors allow additional specific interpretations in the two mentioned cases. Applications to estimating and testing hypotheses on scaling parameters are presented, and two-dimensional sample clouds are simulated.

  7. Width Distributions for Convex Regular Polyhedra

    CERN Document Server

    Finch, Steven R

    2011-01-01

    The mean width is a measure on three-dimensional convex bodies that enjoys equal status with volume and surface area [Rota]. As the phrase suggests, it is the mean of a probability density f. We verify formulas for mean widths of the regular tetrahedron and the cube. Higher-order moments of f_tetra and f_cube have not been examined until now. Assume that each polyhedron has edges of unit length. We deduce that the mean square width of the regular tetrahedron is 1/3+(3+sqrt(3))/(3*pi) and the mean square width of the cube is 1+4/pi.

  8. Measuring Voting Power in Convex Policy Spaces

    Directory of Open Access Journals (Sweden)

    Sascha Kurz

    2014-03-01

    Full Text Available Classical power index analysis considers the individual’s ability to influence the aggregated group decision by changing its own vote, where all decisions and votes are assumed to be binary. In many practical applications we have more options than either “yes” or “no”. Here we generalize three important power indices to continuous convex policy spaces. This allows the analysis of a collection of economic problems like, e.g., tax rates or spending that otherwise would not be covered in binary models.

  9. Trace-Inequalities and Matrix-Convex Functions

    Directory of Open Access Journals (Sweden)

    Ando Tsuyoshi

    2010-01-01

    Full Text Available Abstract A real-valued continuous function on an interval gives rise to a map via functional calculus from the convex set of Hermitian matrices all of whose eigenvalues belong to the interval. Since the subpace of Hermitian matrices is provided with the order structure induced by the cone of positive semidefinite matrices, one can consider convexity of this map. We will characterize its convexity by the following trace-inequalities: for . A related topic will be also discussed.

  10. Recovery of Sparse Probability Measures via Convex Programming

    OpenAIRE

    Pilanci, Mert; El Ghaoui, Laurent; Chandrasekaran, Venkat

    2012-01-01

    We consider the problem of cardinality penalized optimization of a convex function over the probability simplex with additional convex constraints. The classical ℓ_1 regularizer fails to promote sparsity on the probability simplex since ℓ_1 norm on the probability simplex is trivially constant. We propose a direct relaxation of the minimum cardinality problem and show that it can be efficiently solved using convex programming. As a first application we consider recovering a spa...

  11. Lower Bound for Convex Hull Area and Universal Cover Problems

    CERN Document Server

    Khandhawit, Tirasan; Sriswasdi, Sira

    2011-01-01

    In this paper, we provide a lower bound for an area of the convex hull of points and a rectangle in a plane. We then apply this estimate to establish a lower bound for a universal cover problem. We showed that a convex universal cover for a unit length curve has area at least 0.232239. In addition, we show that a convex universal cover for a unit closed curve has area at least 0.0879873.

  12. Joint Chance-Constrained Dynamic Programming

    Science.gov (United States)

    Ono, Masahiro; Kuwata, Yoshiaki; Balaram, J. Bob

    2012-01-01

    This paper presents a novel dynamic programming algorithm with a joint chance constraint, which explicitly bounds the risk of failure in order to maintain the state within a specified feasible region. A joint chance constraint cannot be handled by existing constrained dynamic programming approaches since their application is limited to constraints in the same form as the cost function, that is, an expectation over a sum of one-stage costs. We overcome this challenge by reformulating the joint chance constraint into a constraint on an expectation over a sum of indicator functions, which can be incorporated into the cost function by dualizing the optimization problem. As a result, the primal variables can be optimized by a standard dynamic programming, while the dual variable is optimized by a root-finding algorithm that converges exponentially. Error bounds on the primal and dual objective values are rigorously derived. We demonstrate the algorithm on a path planning problem, as well as an optimal control problem for Mars entry, descent and landing. The simulations are conducted using a real terrain data of Mars, with four million discrete states at each time step.

  13. Joint Chance-Constrained Dynamic Programming

    Science.gov (United States)

    Ono, Masahiro; Kuwata, Yoshiaki; Balaram, J. Bob

    2012-01-01

    This paper presents a novel dynamic programming algorithm with a joint chance constraint, which explicitly bounds the risk of failure in order to maintain the state within a specified feasible region. A joint chance constraint cannot be handled by existing constrained dynamic programming approaches since their application is limited to constraints in the same form as the cost function, that is, an expectation over a sum of one-stage costs. We overcome this challenge by reformulating the joint chance constraint into a constraint on an expectation over a sum of indicator functions, which can be incorporated into the cost function by dualizing the optimization problem. As a result, the primal variables can be optimized by a standard dynamic programming, while the dual variable is optimized by a root-finding algorithm that converges exponentially. Error bounds on the primal and dual objective values are rigorously derived. We demonstrate the algorithm on a path planning problem, as well as an optimal control problem for Mars entry, descent and landing. The simulations are conducted using a real terrain data of Mars, with four million discrete states at each time step.

  14. Complex Dynamical Behavior of a Two-Stage Colpitts Oscillator with Magnetically Coupled Inductors

    Directory of Open Access Journals (Sweden)

    V. Kamdoum Tamba

    2014-01-01

    Full Text Available A five-dimensional (5D controlled two-stage Colpitts oscillator is introduced and analyzed. This new electronic oscillator is constructed by considering the well-known two-stage Colpitts oscillator with two further elements (coupled inductors and variable resistor. In contrast to current approaches based on piecewise linear (PWL model, we propose a smooth mathematical model (with exponential nonlinearity to investigate the dynamics of the oscillator. Several issues, such as the basic dynamical behaviour, bifurcation diagrams, Lyapunov exponents, and frequency spectra of the oscillator, are investigated theoretically and numerically by varying a single control resistor. It is found that the oscillator moves from the state of fixed point motion to chaos via the usual paths of period-doubling and interior crisis routes as the single control resistor is monitored. Furthermore, an experimental study of controlled Colpitts oscillator is carried out. An appropriate electronic circuit is proposed for the investigations of the complex dynamics behaviour of the system. A very good qualitative agreement is obtained between the theoretical/numerical and experimental results.

  15. Optimization of Two-Stage Peltier Modules: Structure and Exergetic Efficiency

    Directory of Open Access Journals (Sweden)

    Cesar Ramirez-Lopez

    2012-08-01

    Full Text Available In this paper we undertake the theoretical analysis of a two-stage semiconductor thermoelectric module (TEM which contains an arbitrary and different number of thermocouples, n1 and n2, in each stage (pyramid-styled TEM. The analysis is based on a dimensionless entropy balance set of equations. We study the effects of n1 and n2, the flowing electric currents through each stage, the applied temperatures and the thermoelectric properties of the semiconductor materials on the exergetic efficiency. Our main result implies that the electric currents flowing in each stage must necessarily be different with a ratio about 4.3 if the best thermal performance and the highest temperature difference possible between the cold and hot side of the device are pursued. This fact had not been pointed out before for pyramid-styled two stage TEM. The ratio n1/n2 should be about 8.

  16. A two-stage series diode for intense large-area moderate pulsed X rays production

    Science.gov (United States)

    Lai, Dingguo; Qiu, Mengtong; Xu, Qifu; Su, Zhaofeng; Li, Mo; Ren, Shuqing; Huang, Zhongliang

    2017-01-01

    This paper presents a method for moderate pulsed X rays produced by a series diode, which can be driven by high voltage pulse to generate intense large-area uniform sub-100-keV X rays. A two stage series diode was designed for Flash-II accelerator and experimentally investigated. A compact support system of floating converter/cathode was invented, the extra cathode is floating electrically and mechanically, by withdrawing three support pins several milliseconds before a diode electrical pulse. A double ring cathode was developed to improve the surface electric field and emission stability. The cathode radii and diode separation gap were optimized to enhance the uniformity of X rays and coincidence of the two diode voltages based on the simulation and theoretical calculation. The experimental results show that the two stage series diode can work stably under 700 kV and 300 kA, the average energy of X rays is 86 keV, and the dose is about 296 rad(Si) over 615 cm2 area with uniformity 2:1 at 5 cm from the last converter. Compared with the single diode, the average X rays' energy reduces from 132 keV to 88 keV, and the proportion of sub-100-keV photons increases from 39% to 69%.

  17. Study on a high capacity two-stage free piston Stirling cryocooler working around 30 K

    Science.gov (United States)

    Wang, Xiaotao; Zhu, Jian; Chen, Shuai; Dai, Wei; Li, Ke; Pang, Xiaomin; Yu, Guoyao; Luo, Ercang

    2016-12-01

    This paper presents a two-stage high-capacity free-piston Stirling cryocooler driven by a linear compressor to meet the requirement of the high temperature superconductor (HTS) motor applications. The cryocooler system comprises a single piston linear compressor, a two-stage free piston Stirling cryocooler and a passive oscillator. A single stepped displacer configuration was adopted. A numerical model based on the thermoacoustic theory was used to optimize the system operating and structure parameters. Distributions of pressure wave, phase differences between the pressure wave and the volume flow rate and different energy flows are presented for a better understanding of the system. Some characterizing experimental results are presented. Thus far, the cryocooler has reached a lowest cold-head temperature of 27.6 K and achieved a cooling power of 78 W at 40 K with an input electric power of 3.2 kW, which indicates a relative Carnot efficiency of 14.8%. When the cold-head temperature increased to 77 K, the cooling power reached 284 W with a relative Carnot efficiency of 25.9%. The influences of different parameters such as mean pressure, input electric power and cold-head temperature are also investigated.

  18. Planning an Agricultural Water Resources Management System: A Two-Stage Stochastic Fractional Programming Model

    Directory of Open Access Journals (Sweden)

    Liang Cui

    2015-07-01

    Full Text Available Irrigation water management is crucial for agricultural production and livelihood security in many regions and countries throughout the world. In this study, a two-stage stochastic fractional programming (TSFP method is developed for planning an agricultural water resources management system under uncertainty. TSFP can provide an effective linkage between conflicting economic benefits and the associated penalties; it can also balance conflicting objectives and maximize the system marginal benefit with per unit of input under uncertainty. The developed TSFP method is applied to a real case of agricultural water resources management of the Zhangweinan River Basin China, which is one of the main food and cotton producing regions in north China and faces serious water shortage. The results demonstrate that the TSFP model is advantageous in balancing conflicting objectives and reflecting complicated relationships among multiple system factors. Results also indicate that, under the optimized irrigation target, the optimized water allocation rate of Minyou Channel and Zhangnan Channel are 57.3% and 42.7%, respectively, which adapts the changes in the actual agricultural water resources management problem. Compared with the inexact two-stage water management (ITSP method, TSFP could more effectively address the sustainable water management problem, provide more information regarding tradeoffs between multiple input factors and system benefits, and help the water managers maintain sustainable water resources development of the Zhangweinan River Basin.

  19. A separate two-stage pulse tube cooler working at liquid helium temperature

    Institute of Scientific and Technical Information of China (English)

    QIU Limin; HE Yonglin; GAN Zhihua; WAN Laihong; CHEN Guobang

    2005-01-01

    A novel 4 K separate two-stage pulse tube cooler (PTC) was designed and tested. The cooler consists of two separate pulse tube coolers, in which the cold end of the first stage regenerator is thermally connected with the middle part of the second regenerator. Compared to the traditional coupled multi-stage pulse tube cooler, the mutual interference between stages can be significantly eliminated. The lowest refrigeration temperature obtained at the first stage pulse tube was 13.8 K. This is a new record for single stage PTC. With two compressors and two rotary valves driving mode, the separate two-stage PTC obtained a refrigeration temperature of 2.5 K at the second stage. Cooling capacities of 508 mW at 4.2 K and 15 W at 37.5 K were achieved simultaneously. A one-compressor and one-rotary valve driving mode has been proposed to further simplify the structure of separate type PTC.

  20. Multiobjective Two-Stage Stochastic Programming Problems with Interval Discrete Random Variables

    Directory of Open Access Journals (Sweden)

    S. K. Barik

    2012-01-01

    Full Text Available Most of the real-life decision-making problems have more than one conflicting and incommensurable objective functions. In this paper, we present a multiobjective two-stage stochastic linear programming problem considering some parameters of the linear constraints as interval type discrete random variables with known probability distribution. Randomness of the discrete intervals are considered for the model parameters. Further, the concepts of best optimum and worst optimum solution are analyzed in two-stage stochastic programming. To solve the stated problem, first we remove the randomness of the problem and formulate an equivalent deterministic linear programming model with multiobjective interval coefficients. Then the deterministic multiobjective model is solved using weighting method, where we apply the solution procedure of interval linear programming technique. We obtain the upper and lower bound of the objective function as the best and the worst value, respectively. It highlights the possible risk involved in the decision-making tool. A numerical example is presented to demonstrate the proposed solution procedure.

  1. Two-Stage Single-Compartment Models to Evaluate Dissolution in the Lower Intestine.

    Science.gov (United States)

    Markopoulos, Constantinos; Vertzoni, Maria; Symillides, Mira; Kesisoglou, Filippos; Reppas, Christos

    2015-09-01

    The purpose was to propose two-stage single-compartment models for evaluating dissolution characteristics in distal ileum and ascending colon, under conditions simulating the bioavailability and bioequivalence studies in fasted and fed state by using the mini-paddle and the compendial flow-through apparatus (closed-loop mode). Immediate release products of two highly dosed active pharmaceutical ingredients (APIs), sulfasalazine and L-870,810, and one mesalamine colon targeting product were used for evaluating their usefulness. Change of medium composition simulating the conditions in distal ileum (SIFileum ) to a medium simulating the conditions in ascending colon in fasted state and in fed state was achieved by adding an appropriate solution in SIFileum . Data with immediate release products suggest that dissolution in lower intestine is substantially different than in upper intestine and is affected by regional pH differences > type/intensity of fluid convection > differences in concentration of other luminal components. Asacol® (400 mg/tab) was more sensitive to type/intensity of fluid convection. In all the cases, data were in line with available human data. Two-stage single-compartment models may be useful for the evaluation of dissolution in lower intestine. The impact of type/intensity of fluid convection and viscosity of media on luminal performance of other APIs and drug products requires further exploration.

  2. Simultaneous bile duct and portal venous branch ligation in two-stage hepatectomy

    Institute of Scientific and Technical Information of China (English)

    Hiroya Iida; Chiaki Yasui; Tsukasa Aihara; Shinichi Ikuta; Hidenori Yoshie; Naoki Yamanaka

    2011-01-01

    Hepatectomy is an effective surgical treatment for multiple bilobar liver metastases from colon cancer; however, one of the primary obstacles to completing surgical resection for these cases is an insufficient volume of the future remnant liver, which may cause postoperative liver failure. To induce atrophy of the unilateral lobe and hypertrophy of the future remnant liver, procedures to occlude the portal vein have been conventionally used prior to major hepatectomy. We report a case of a 50-year-old woman in whom two-stage hepatectomy was performed in combination with intraoperative ligation of the portal vein and the bile duct of the right hepatic lobe. This procedure was designed to promote the atrophic effect on the right hepatic lobe more effectively than the conventional technique, and to the best of our knowledge, it was used for the first time in the present case. Despite successful induction of liver volume shift as well as the following procedure, the patient died of subsequent liver failure after developing recurrent tumors. We discuss the first case in which simultaneous ligation of the portal vein and the biliary system was successfully applied as part of the first step of two-stage hepatectomy.

  3. Metamodeling and Optimization of a Blister Copper Two-Stage Production Process

    Science.gov (United States)

    Jarosz, Piotr; Kusiak, Jan; Małecki, Stanisław; Morkisz, Paweł; Oprocha, Piotr; Pietrucha, Wojciech; Sztangret, Łukasz

    2016-06-01

    It is often difficult to estimate parameters for a two-stage production process of blister copper (containing 99.4 wt.% of Cu metal) as well as those for most industrial processes with high accuracy, which leads to problems related to process modeling and control. The first objective of this study was to model flash smelting and converting of Cu matte stages using three different techniques: artificial neural networks, support vector machines, and random forests, which utilized noisy technological data. Subsequently, more advanced models were applied to optimize the entire process (which was the second goal of this research). The obtained optimal solution was a Pareto-optimal one because the process consisted of two stages, making the optimization problem a multi-criteria one. A sequential optimization strategy was employed, which aimed for optimal control parameters consecutively for both stages. The obtained optimal output parameters for the first smelting stage were used as input parameters for the second converting stage. Finally, a search for another optimal set of control parameters for the second stage of a Kennecott-Outokumpu process was performed. The optimization process was modeled using a Monte-Carlo method, and both modeling parameters and computed optimal solutions are discussed.

  4. Development and optimization of a two-stage gasifier for heat and power production

    Science.gov (United States)

    Kosov, V. V.; Zaichenko, V. M.

    2016-11-01

    The major methods of biomass thermal conversion are combustion in excess oxygen, gasification in reduced oxygen, and pyrolysis in the absence of oxygen. The end products of these methods are heat, gas, liquid and solid fuels. From the point of view of energy production, none of these methods can be considered optimal. A two-stage thermal conversion of biomass based on pyrolysis as the first stage and pyrolysis products cracking as the second stage can be considered the optimal method for energy production that allows obtaining synthesis gas consisting of hydrogen and carbon monoxide and not containing liquid or solid particles. On the base of the two stage cracking technology, there was designed an experimental power plant of electric power up to 50 kW. The power plant consists of a thermal conversion module and a gas engine power generator adapted for operation on syngas. Purposes of the work were determination of an optimal operation temperature of the thermal conversion module and an optimal mass ratio of processed biomass and charcoal in cracking chamber of the thermal conversion module. Experiments on the pyrolysis products cracking at various temperatures show that the optimum cracking temperature is equal to 1000 °C. From the results of measuring the volume of gas produced in different mass ratios of charcoal and wood biomass processed, it follows that the maximum volume of the gas in the range of the mass ratio equal to 0.5-0.6.

  5. On bi-criteria two-stage transportation problem: a case study

    Directory of Open Access Journals (Sweden)

    Ahmad MURAD

    2010-01-01

    Full Text Available The study of the optimum distribution of goods between sources and destinations is one of the important topics in projects economics. This importance comes as a result of minimizing the transportation cost, deterioration, time, etc. The classical transportation problem constitutes one of the major areas of application for linear programming. The aim of this problem is to obtain the optimum distribution of goods from different sources to different destinations which minimizes the total transportation cost. From the practical point of view, the transportation problems may differ from the classical form. It may contain one or more objective function, one or more stage to transport, one or more type of commodity with one or more means of transport. The aim of this paper is to construct an optimization model for transportation problem for one of mill-stones companies. The model is formulated as a bi-criteria two-stage transportation problem with a special structure depending on the capacities of suppliers, warehouses and requirements of the destinations. A solution algorithm is introduced to solve this class of bi-criteria two-stage transportation problem to obtain the set of non-dominated extreme points and the efficient solutions accompanied with each one that enables the decision maker to choose the best one. The solution algorithm mainly based on the fruitful application of the methods for treating transportation problems, theory of duality of linear programming and the methods of solving bi-criteria linear programming problems.

  6. An integrated two-stage support vector machine approach to forecast inundation maps during typhoons

    Science.gov (United States)

    Jhong, Bing-Chen; Wang, Jhih-Huang; Lin, Gwo-Fong

    2017-04-01

    During typhoons, accurate forecasts of hourly inundation depths are essential for inundation warning and mitigation. Due to the lack of observed data of inundation maps, sufficient observed data are not available for developing inundation forecasting models. In this paper, the inundation depths, which are simulated and validated by a physically based two-dimensional model (FLO-2D), are used as a database for inundation forecasting. A two-stage inundation forecasting approach based on Support Vector Machine (SVM) is proposed to yield 1- to 6-h lead-time inundation maps during typhoons. In the first stage (point forecasting), the proposed approach not only considers the rainfall intensity and inundation depth as model input but also simultaneously considers cumulative rainfall and forecasted inundation depths. In the second stage (spatial expansion), the geographic information of inundation grids and the inundation forecasts of reference points are used to yield inundation maps. The results clearly indicate that the proposed approach effectively improves the forecasting performance and decreases the negative impact of increasing forecast lead time. Moreover, the proposed approach is capable of providing accurate inundation maps for 1- to 6-h lead times. In conclusion, the proposed two-stage forecasting approach is suitable and useful for improving the inundation forecasting during typhoons, especially for long lead times.

  7. The influence of partial oxidation mechanisms on tar destruction in TwoStage biomass gasification

    DEFF Research Database (Denmark)

    Ahrenfeldt, Jesper; Egsgaard, Helge; Stelte, Wolfgang

    2013-01-01

    TwoStage gasification of biomass results in almost tar free producer gas suitable for multiple end-use purposes. In the present study, it is investigated to what extent the partial oxidation process of the pyrolysis gas from the first stage is involved in direct and in-direct tar destruction and ...... tar destruction and a high moisture content of the biomass enhances the decomposition of phenol and inhibits the formation of naphthalene. This enhances tar conversion and gasification in the char-bed, and thus contributes in-directly to the tar destruction.......TwoStage gasification of biomass results in almost tar free producer gas suitable for multiple end-use purposes. In the present study, it is investigated to what extent the partial oxidation process of the pyrolysis gas from the first stage is involved in direct and in-direct tar destruction...... and conversion. The study identifies the following major impact factors regarding tar content in the producer gas: oxidation temperature, excess air ratio and biomass moisture content. In a experimental setup, wood pellets were pyrolyzed and the resulting pyrolysis gas was transferred in a heated partial...

  8. Numerical simulation of municipal solid waste combustion in a novel two-stage reciprocating incinerator.

    Science.gov (United States)

    Huai, X L; Xu, W L; Qu, Z Y; Li, Z G; Zhang, F P; Xiang, G M; Zhu, S Y; Chen, G

    2008-01-01

    A mathematical model was presented in this paper for the combustion of municipal solid waste in a novel two-stage reciprocating grate furnace. Numerical simulations were performed to predict the temperature, the flow and the species distributions in the furnace, with practical operational conditions taken into account. The calculated results agree well with the test data, and the burning behavior of municipal solid waste in the novel two-stage reciprocating incinerator can be demonstrated well. The thickness of waste bed, the initial moisture content, the excessive air coefficient and the secondary air are the major factors that influence the combustion process. If the initial moisture content of waste is high, both the heat value of waste and the temperature inside incinerator are low, and less oxygen is necessary for combustion. The air supply rate and the primary air distribution along the grate should be adjusted according to the initial moisture content of the waste. A reasonable bed thickness and an adequate excessive air coefficient can keep a higher temperature, promote the burnout of combustibles, and consequently reduce the emission of dioxin pollutants. When the total air supply is constant, reducing primary air and introducing secondary air properly can enhance turbulence and mixing, prolong the residence time of flue gas, and promote the complete combustion of combustibles. This study provides an important reference for optimizing the design and operation of municipal solid wastes furnace.

  9. Two stage heterotrophy/photoinduction culture of Scenedesmus incrassatulus: potential for lutein production.

    Science.gov (United States)

    Flórez-Miranda, Liliana; Cañizares-Villanueva, Rosa Olivia; Melchy-Antonio, Orlando; Jerónimo, Fernando Martínez-; Flores-Ortíz, Cesar Mateo

    2017-09-16

    A biomass production process including two stages, heterotrophy/photoinduction (TSHP), was developed to improve biomass and lutein production by the green microalgae Scenedesmus incrassatulus. To determine the effects of different nitrogen sources (yeast extract and urea) and temperature in the heterotrophic stage, experiments using shake flask cultures with glucose as the carbon source were carried out. The highest biomass productivity and specific pigment concentrations were reached using urea+vitamins (U+V) at 30°C. The first stage of the TSHP process was done in a 6L bioreactor, and the inductions in a 3L airlift photobioreactor. At the end of the heterotrophic stage, S. incrassatulus achieved the maximal biomass concentration, increasing from 7.22gL(-1) to 17.98gL(-1) with an increase in initial glucose concentration from 10.6gL(-1) to 30.3gL(-1). However, the higher initial glucose concentration resulted in a lower specific growth rate (μ) and lower cell yield (Yx/s), possibly due to substrate inhibition. After 24h of photoinduction, lutein content in S. incrassatulus biomass was 7 times higher than that obtained at the end of heterotrophic cultivation, and the lutein productivity was 1.6 times higher compared with autotrophic culture of this microalga. Hence, the two-stage heterotrophy/photoinduction culture is an effective strategy for high cell density and lutein production in S. incrassatulus. Copyright © 2017. Published by Elsevier B.V.

  10. Aerobic and two-stage anaerobic-aerobic sludge digestion with pure oxygen and air aeration.

    Science.gov (United States)

    Zupancic, Gregor D; Ros, Milenko

    2008-01-01

    The degradability of excess activated sludge from a wastewater treatment plant was studied. The objective was establishing the degree of degradation using either air or pure oxygen at different temperatures. Sludge treated with pure oxygen was degraded at temperatures from 22 degrees C to 50 degrees C while samples treated with air were degraded between 32 degrees C and 65 degrees C. Using air, sludge is efficiently degraded at 37 degrees C and at 50-55 degrees C. With oxygen, sludge was most effectively degraded at 38 degrees C or at 25-30 degrees C. Two-stage anaerobic-aerobic processes were studied. The first anaerobic stage was always operated for 5 days HRT, and the second stage involved aeration with pure oxygen and an HRT between 5 and 10 days. Under these conditions, there is 53.5% VSS removal and 55.4% COD degradation at 15 days HRT - 5 days anaerobic, 10 days aerobic. Sludge digested with pure oxygen at 25 degrees C in a batch reactor converted 48% of sludge total Kjeldahl nitrogen to nitrate. Addition of an aerobic stage with pure oxygen aeration to the anaerobic digestion enhances ammonium nitrogen removal. In a two-stage anaerobic-aerobic sludge digestion process within 8 days HRT of the aerobic stage, the removal of ammonium nitrogen was 85%.

  11. Dynamics of installation way for the actuator of a two-stage active vibration-isolator

    Institute of Scientific and Technical Information of China (English)

    HU Li; HUANG Qi-bai; HE Xue-song; YUAN Ji-xuan

    2008-01-01

    We investigated the behaviors of an active control system of two-stage vibration isolation with the actuator installed in parallel with either the upper passive mount or the lower passive isolation mount. We revealed the relationships between the active control force of the actuator and the parameters of the passive isolators by studying the dynamics of two-stage active vibration isolation for the actuator at the foregoing two positions in turn. With the actuator installed beside the upper mount, a small active force can achieve a very good isolating effect when the frequency of the stimulating force is much larger than the natural frequency of the upper mount; a larger active force is required in the low-frequency domain; and the active force equals the stimulating force when the upper mount works within the resonance region, suggesting an approach to reducing wobble and ensuring desirable installation accuracy by increasing the upper-mount stiffness. In either the low or the high frequency region far away from the resonance region, the active force is smaller when the actuator is beside the lower mount than beside the upper mount.

  12. Final Report on Two-Stage Fast Spectrum Fuel Cycle Options

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Sik [Purdue Univ., West Lafayette, IN (United States); Lin, C. S. [Purdue Univ., West Lafayette, IN (United States); Hader, J. S. [Purdue Univ., West Lafayette, IN (United States); Park, T. K. [Purdue Univ., West Lafayette, IN (United States); Deng, P. [Purdue Univ., West Lafayette, IN (United States); Yang, G. [Purdue Univ., West Lafayette, IN (United States); Jung, Y. S. [Purdue Univ., West Lafayette, IN (United States); Kim, T. K. [Argonne National Lab. (ANL), Argonne, IL (United States); Stauff, N. E. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-30

    This report presents the performance characteristics of two “two-stage” fast spectrum fuel cycle options proposed to enhance uranium resource utilization and to reduce nuclear waste generation. One is a two-stage fast spectrum fuel cycle option of continuous recycle of plutonium (Pu) in a fast reactor (FR) and subsequent burning of minor actinides (MAs) in an accelerator-driven system (ADS). The first stage is a sodium-cooled FR fuel cycle starting with low-enriched uranium (LEU) fuel; at the equilibrium cycle, the FR is operated using the recovered Pu and natural uranium without supporting LEU. Pu and uranium (U) are co-extracted from the discharged fuel and recycled in the first stage, and the recovered MAs are sent to the second stage. The second stage is a sodium-cooled ADS in which MAs are burned in an inert matrix fuel form. The discharged fuel of ADS is reprocessed, and all the recovered heavy metals (HMs) are recycled into the ADS. The other is a two-stage FR/ADS fuel cycle option with MA targets loaded in the FR. The recovered MAs are not directly sent to ADS, but partially incinerated in the FR in order to reduce the amount of MAs to be sent to the ADS. This is a heterogeneous recycling option of transuranic (TRU) elements

  13. Hydrogen and methane production from household solid waste in the two-stage fermentation process

    DEFF Research Database (Denmark)

    Lui, D.; Liu, D.; Zeng, Raymond Jianxiong

    2006-01-01

    A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H-2/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH4/g VS....... Furthermore, this study also provided direct evidence in the dynamic fermentation process that, hydrogen production increase was reflected by acetate to butyrate ratio increase in liquid phase. (c) 2006 Elsevier Ltd. All rights reserved.......A two-stage process combined hydrogen and methane production from household solid waste was demonstrated working successfully. The yield of 43 mL H-2/g volatile solid (VS) added was generated in the first hydrogen production stage and the methane production in the second stage was 500 mL CH4/g VS...... added. This figure was 21% higher than the methane yield from the one-stage process, which was run as control. Sparging of the hydrogen reactor with methane gas resulted in doubling of the hydrogen production. PH was observed as a key factor affecting fermentation pathway in hydrogen production stage...

  14. Two-stage electrodialytic concentration of glyceric acid from fermentation broth.

    Science.gov (United States)

    Habe, Hiroshi; Shimada, Yuko; Fukuoka, Tokuma; Kitamoto, Dai; Itagaki, Masayuki; Watanabe, Kunihiko; Yanagishita, Hiroshi; Sakaki, Keiji

    2010-12-01

    The aim of this research was the application of a two-stage electrodialysis (ED) method for glyceric acid (GA) recovery from fermentation broth. First, by desalting ED, glycerate solutions (counterpart is Na+) were concentrated using ion-exchange membranes, and the glycerate recovery and energy consumption became more efficient with increasing the initial glycerate concentration (30 to 130 g/l). Second, by water-splitting ED, the concentrated glycerate was electroconverted to GA using bipolar membranes. Using a culture broth of Acetobacter tropicalis containing 68.6 g/l of D-glycerate, a final D-GA concentration of 116 g/l was obtained following the two-stage ED process. The total energy consumption for the D-glycerate concentration and its electroconversion to D-GA was approximately 0.92 kWh per 1 kg of D-GA. Copyright © 2010 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  15. Occurrence of two-stage hardening in C-Mn steel wire rods containing pearlitic microstructure

    Science.gov (United States)

    Singh, Balbir; Sahoo, Gadadhar; Saxena, Atul

    2016-09-01

    The 8 and 10 mm diameter wire rods intended for use as concrete reinforcement were produced/ hot rolled from C-Mn steel chemistry containing various elements within the range of C:0.55-0.65, Mn:0.85-1.50, Si:0.05-0.09, S:0.04 max, P:0.04 max and N:0.006 max wt%. Depending upon the C and Mn contents the product attained pearlitic microstructure in the range of 85-93% with balance amount of polygonal ferrite transformed at prior austenite grain boundaries. The pearlitic microstructure in the wire rods helped in achieving yield strength, tensile strength, total elongation and reduction in area values within the range of 422-515 MPa, 790-950 MPa, 22-15% and 45-35%, respectively. On analyzing the tensile results it was revealed that the material experienced hardening in two stages separable by a knee strain value of about 0.05. The occurrence of two stage hardening thus in the steel with hardening coefficients of 0.26 and 0.09 could be demonstrated with the help of derived relationships existed between flow stress and the strain.

  16. Rules and mechanisms for efficient two-stage learning in neural circuits

    Science.gov (United States)

    Teşileanu, Tiberiu; Ölveczky, Bence; Balasubramanian, Vijay

    2017-01-01

    Trial-and-error learning requires evaluating variable actions and reinforcing successful variants. In songbirds, vocal exploration is induced by LMAN, the output of a basal ganglia-related circuit that also contributes a corrective bias to the vocal output. This bias is gradually consolidated in RA, a motor cortex analogue downstream of LMAN. We develop a new model of such two-stage learning. Using stochastic gradient descent, we derive how the activity in ‘tutor’ circuits (e.g., LMAN) should match plasticity mechanisms in ‘student’ circuits (e.g., RA) to achieve efficient learning. We further describe a reinforcement learning framework through which the tutor can build its teaching signal. We show that mismatches between the tutor signal and the plasticity mechanism can impair learning. Applied to birdsong, our results predict the temporal structure of the corrective bias from LMAN given a plasticity rule in RA. Our framework can be applied predictively to other paired brain areas showing two-stage learning. DOI: http://dx.doi.org/10.7554/eLife.20944.001 PMID:28374674

  17. Two-stage estimation for multivariate recurrent event data with a dependent terminal event.

    Science.gov (United States)

    Chen, Chyong-Mei; Chuang, Ya-Wen; Shen, Pao-Sheng

    2015-03-01

    Recurrent event data arise in longitudinal follow-up studies, where each subject may experience the same type of events repeatedly. The work in this article is motivated by the data from a study of repeated peritonitis for patients on peritoneal dialysis. Due to the aspects of medicine and cost, the peritonitis cases were classified into two types: Gram-positive and non-Gram-positive peritonitis. Further, since the death and hemodialysis therapy preclude the occurrence of recurrent events, we face multivariate recurrent event data with a dependent terminal event. We propose a flexible marginal model, which has three characteristics: first, we assume marginal proportional hazard and proportional rates models for terminal event time and recurrent event processes, respectively; second, the inter-recurrences dependence and the correlation between the multivariate recurrent event processes and terminal event time are modeled through three multiplicative frailties corresponding to the specified marginal models; third, the rate model with frailties for recurrent events is specified only on the time before the terminal event. We propose a two-stage estimation procedure for estimating unknown parameters. We also establish the consistency of the two-stage estimator. Simulation studies show that the proposed approach is appropriate for practical use. The methodology is applied to the peritonitis cohort data that motivated this study. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Two-stage earth-to-orbit vehicles with dual-fuel propulsion in the Orbiter

    Science.gov (United States)

    Martin, J. A.

    1982-01-01

    Earth-to-orbit vehicle studies of future replacements for the Space Shuttle are needed to guide technology development. Previous studies that have examined single-stage vehicles have shown advantages for dual-fuel propulsion. Previous two-stage system studies have assumed all-hydrogen fuel for the Orbiters. The present study examined dual-fuel Orbiters and found that the system dry mass could be reduced with this concept. The possibility of staging the booster at a staging velocity low enough to allow coast-back to the launch site is shown to be beneficial, particularly in combination with a dual-fuel Orbiter. An engine evaluation indicated the same ranking of engines as did a previous single-stage study. Propane and RP-1 fuels result in lower vehicle dry mass than methane, and staged-combustion engines are preferred over gas-generator engines. The sensitivity to the engine selection is less for two-stage systems than for single-stage systems.

  19. Two-stage effects of awareness cascade on epidemic spreading in multiplex networks

    Science.gov (United States)

    Guo, Quantong; Jiang, Xin; Lei, Yanjun; Li, Meng; Ma, Yifang; Zheng, Zhiming

    2015-01-01

    Human awareness plays an important role in the spread of infectious diseases and the control of propagation patterns. The dynamic process with human awareness is called awareness cascade, during which individuals exhibit herd-like behavior because they are making decisions based on the actions of other individuals [Borge-Holthoefer et al., J. Complex Networks 1, 3 (2013), 10.1093/comnet/cnt006]. In this paper, to investigate the epidemic spreading with awareness cascade, we propose a local awareness controlled contagion spreading model on multiplex networks. By theoretical analysis using a microscopic Markov chain approach and numerical simulations, we find the emergence of an abrupt transition of epidemic threshold βc with the local awareness ratio α approximating 0.5 , which induces two-stage effects on epidemic threshold and the final epidemic size. These findings indicate that the increase of α can accelerate the outbreak of epidemics. Furthermore, a simple 1D lattice model is investigated to illustrate the two-stage-like sharp transition at αc≈0.5 . The results can give us a better understanding of why some epidemics cannot break out in reality and also provide a potential access to suppressing and controlling the awareness cascading systems.

  20. Configuration Consideration for Expander in Transcritical Carbon Dioxide Two-Stage Compression Cycle

    Institute of Scientific and Technical Information of China (English)

    MA Yitai; YANG Junlan; GUAN Haiqing; LI Minxia

    2005-01-01

    To investigate the configuration consideration of expander in transcritical carbon dioxide two-stage compression cycle, the best place in the cycle should be searched for to reinvest the recovery work so as to improve the system efficiency. The expander and the compressor are connected to the same shaft and integrated into one unit, with the latter being driven by the former, thus the transfer loss and leakage loss can be decreased greatly. In these systems, the expander can be either connected with the first stage compressor (shortened as DCDL cycle) or the second stage compressor (shortened as DCDH cycle), but the two configuration ways can get different performances. By setting up theoretical model for two kinds of expander configuration ways in the transcritical carbon dioxide two-stage compression cycle, the first and the second laws of thermodynamics are used to analyze the coefficient of performance, exergy efficiency, inter-stage pressure, discharge temperature and exergy losses of each component for the two cycles. From the model results, the performance of DCDH cycle is better than that of DCDL cycle. The analysis results are indispensable to providing a theoretical basis for practical design and operating.

  1. Two-stage coordination multi-radio multi-channel mac protocol for wireless mesh networks

    CERN Document Server

    Zhao, Bingxuan

    2011-01-01

    Within the wireless mesh network, a bottleneck problem arises as the number of concurrent traffic flows (NCTF) increases over a single common control channel, as it is for most conventional networks. To alleviate this problem, this paper proposes a two-stage coordination multi-radio multi-channel MAC (TSC-M2MAC) protocol that designates all available channels as both control channels and data channels in a time division manner through a two-stage coordination. At the first stage, a load balancing breadth-first-search-based vertex coloring algorithm for multi-radio conflict graph is proposed to intelligently allocate multiple control channels. At the second stage, a REQ/ACK/RES mechanism is proposed to realize dynamical channel allocation for data transmission. At this stage, the Channel-and-Radio Utilization Structure (CRUS) maintained by each node is able to alleviate the hidden nodes problem; also, the proposed adaptive adjustment algorithm for the Channel Negotiation and Allocation (CNA) sub-interval is ab...

  2. Development of a Two-Stage Microalgae Dewatering Process – A Life Cycle Assessment Approach

    Science.gov (United States)

    Soomro, Rizwan R.; Zeng, Xianhai; Lu, Yinghua; Lin, Lu; Danquah, Michael K.

    2016-01-01

    Even though microalgal biomass is leading the third generation biofuel research, significant effort is required to establish an economically viable commercial-scale microalgal biofuel production system. Whilst a significant amount of work has been reported on large-scale cultivation of microalgae using photo-bioreactors and pond systems, research focus on establishing high performance downstream dewatering operations for large-scale processing under optimal economy is limited. The enormous amount of energy and associated cost required for dewatering large-volume microalgal cultures has been the primary hindrance to the development of the needed biomass quantity for industrial-scale microalgal biofuels production. The extremely dilute nature of large-volume microalgal suspension and the small size of microalgae cells in suspension create a significant processing cost during dewatering and this has raised major concerns towards the economic success of commercial-scale microalgal biofuel production as an alternative to conventional petroleum fuels. This article reports an effective framework to assess the performance of different dewatering technologies as the basis to establish an effective two-stage dewatering system. Bioflocculation coupled with tangential flow filtration (TFF) emerged a promising technique with total energy input of 0.041 kWh, 0.05 kg CO2 emissions and a cost of $ 0.0043 for producing 1 kg of microalgae biomass. A streamlined process for operational analysis of two-stage microalgae dewatering technique, encompassing energy input, carbon dioxide emission, and process cost, is presented. PMID:26904075

  3. Two-stage image segmentation based on edge and region information

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A two-stage method for image segmentation based on edge and region information is proposed. Different deformation schemes are used at two stages for segmenting the object correctly in image plane. At the first stage, the contour of the model is divided into several segments hierarchically that deform respectively using affine transformation. After the contour is deformed to the approximate boundary of object, a fine match mechanism using statistical information of local region to redefine the external energy of the model is used to make the contour fit the object's boundary exactly. The algorithm is effective, as the hierarchical segmental deformation makes use of the globe and local information of the image, the affine transformation keeps the consistency of the model, and the reformative approaches of computing the internal energy and external energy are proposed to reduce the algorithm complexity. The adaptive method of defining the search area at the second stage makes the model converge quickly. The experimental results indicate that the proposed model is effective and robust to local minima and able to search for concave objects.

  4. Waste-gasification efficiency of a two-stage fluidized-bed gasification system.

    Science.gov (United States)

    Liu, Zhen-Shu; Lin, Chiou-Liang; Chang, Tsung-Jen; Weng, Wang-Chang

    2016-02-01

    This study employed a two-stage fluidized-bed gasifier as a gasification reactor and two additives (CaO and activated carbon) as the Stage-II bed material to investigate the effects of the operating temperature (700°C, 800°C, and 900°C) on the syngas composition, total gas yield, and gas-heating value during simulated waste gasification. The results showed that when the operating temperature increased from 700 to 900°C, the molar percentage of H2 in the syngas produced by the two-stage gasification process increased from 19.4 to 29.7mol% and that the total gas yield and gas-heating value also increased. When CaO was used as the additive, the molar percentage of CO2 in the syngas decreased, and the molar percentage of H2 increased. When activated carbon was used, the molar percentage of CH4 in the syngas increased, and the total gas yield and gas-heating value increased. Overall, CaO had better effects on the production of H2, whereas activated carbon clearly enhanced the total gas yield and gas-heating value. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  5. Two-Stage Orthogonal Least Squares Methods for Neural Network Construction.

    Science.gov (United States)

    Zhang, Long; Li, Kang; Bai, Er-Wei; Irwin, George W

    2015-08-01

    A number of neural networks can be formulated as the linear-in-the-parameters models. Training such networks can be transformed to a model selection problem where a compact model is selected from all the candidates using subset selection algorithms. Forward selection methods are popular fast subset selection approaches. However, they may only produce suboptimal models and can be trapped into a local minimum. More recently, a two-stage fast recursive algorithm (TSFRA) combining forward selection and backward model refinement has been proposed to improve the compactness and generalization performance of the model. This paper proposes unified two-stage orthogonal least squares methods instead of the fast recursive-based methods. In contrast to the TSFRA, this paper derives a new simplified relationship between the forward and the backward stages to avoid repetitive computations using the inherent orthogonal properties of the least squares methods. Furthermore, a new term exchanging scheme for backward model refinement is introduced to reduce computational demand. Finally, given the error reduction ratio criterion, effective and efficient forward and backward subset selection procedures are proposed. Extensive examples are presented to demonstrate the improved model compactness constructed by the proposed technique in comparison with some popular methods.

  6. Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler

    Institute of Scientific and Technical Information of China (English)

    ZHOU Nai-jun; XU Qiong-hui; ZHOU Ping

    2005-01-01

    Considering the fact that the temperature distribution in furnace of a tangential fired pulverized coal boiler is difficult to be measured and monitored, two-stage numerical simulation method was put forward. First, multi-field coupling simulation in typical work conditions was carried out off-line with the software CFX-4.3, and then the expression of temperature profile varying with operating parameter was obtained. According to real-time operating parameters, the temperature at arbitrary point of the furnace can be calculated by using this expression. Thus the temperature profile can be shown on-line and monitoring for combustion state in the furnace is realized. The simul-ation model was checked by the parameters measured in an operating boiler, DG130-9.8/540. The maximum of relative error is less than 12% and the absolute error is less than 120 ℃, which shows that the proposed two-stage simulation method is reliable and able to satisfy the requirement of industrial application.

  7. A low-voltage sense amplifier with two-stage operational amplifier clamping for flash memory

    Science.gov (United States)

    Guo, Jiarong

    2017-04-01

    A low-voltage sense amplifier with reference current generator utilizing two-stage operational amplifier clamp structure for flash memory is presented in this paper, capable of operating with minimum supply voltage at 1 V. A new reference current generation circuit composed of a reference cell and a two-stage operational amplifier clamping the drain pole of the reference cell is used to generate the reference current, which avoids the threshold limitation caused by current mirror transistor in the traditional sense amplifier. A novel reference voltage generation circuit using dummy bit-line structure without pull-down current is also adopted, which not only improves the sense window enhancing read precision but also saves power consumption. The sense amplifier was implemented in a flash realized in 90 nm flash technology. Experimental results show the access time is 14.7 ns with power supply of 1.2 V and slow corner at 125 °C. Project supported by the National Natural Science Fundation of China (No. 61376028).

  8. Two-stage high temperature sludge gasification using the waste heat from hot blast furnace slags.

    Science.gov (United States)

    Sun, Yongqi; Zhang, Zuotai; Liu, Lili; Wang, Xidong

    2015-12-01

    Nowadays, disposal of sewage sludge from wastewater treatment plants and recovery of waste heat from steel industry, become two important environmental issues and to integrate these two problems, a two-stage high temperature sludge gasification approach was investigated using the waste heat in hot slags herein. The whole process was divided into two stages, i.e., the low temperature sludge pyrolysis at ⩽ 900°C in argon agent and the high temperature char gasification at ⩾ 900°C in CO2 agent, during which the heat required was supplied by hot slags in different temperature ranges. Both the thermodynamic and kinetic mechanisms were identified and it was indicated that an Avrami-Erofeev model could best interpret the stage of char gasification. Furthermore, a schematic concept of this strategy was portrayed, based on which the potential CO yield and CO2 emission reduction achieved in China could be ∼1.92∗10(9)m(3) and 1.93∗10(6)t, respectively.

  9. A two-stage method to determine optimal product sampling considering dynamic potential market.

    Science.gov (United States)

    Hu, Zhineng; Lu, Wei; Han, Bing

    2015-01-01

    This paper develops an optimization model for the diffusion effects of free samples under dynamic changes in potential market based on the characteristics of independent product and presents a two-stage method to figure out the sampling level. The impact analysis of the key factors on the sampling level shows that the increase of the external coefficient or internal coefficient has a negative influence on the sampling level. And the changing rate of the potential market has no significant influence on the sampling level whereas the repeat purchase has a positive one. Using logistic analysis and regression analysis, the global sensitivity analysis gives a whole analysis of the interaction of all parameters, which provides a two-stage method to estimate the impact of the relevant parameters in the case of inaccuracy of the parameters and to be able to construct a 95% confidence interval for the predicted sampling level. Finally, the paper provides the operational steps to improve the accuracy of the parameter estimation and an innovational way to estimate the sampling level.

  10. Two staged incentive contract focused on efficiency and innovation matching in critical chain project management

    Directory of Open Access Journals (Sweden)

    Min Zhang

    2014-09-01

    Full Text Available Purpose: The purpose of this paper is to define the relative optimal incentive contract to effectively encourage employees to improve work efficiency while actively implementing innovative behavior. Design/methodology/approach: This paper analyzes a two staged incentive contract coordinated with efficiency and innovation in Critical Chain Project Management using learning real options, based on principle-agent theory. The situational experiment is used to analyze the validity of the basic model. Finding: The two staged incentive scheme is more suitable for employees to create and implement learning real options, which will throw themselves into innovation process efficiently in Critical Chain Project Management. We prove that the combination of tolerance for early failure and reward for long-term success is effective in motivating innovation. Research limitations/implications: We do not include the individual characteristics of uncertain perception, which might affect the consistency of external validity. The basic model and the experiment design need to improve. Practical Implications: The project managers should pay closer attention to early innovation behavior and monitoring feedback of competition time in the implementation of Critical Chain Project Management. Originality/value: The central contribution of this paper is the theoretical and experimental analysis of incentive schemes for innovation in Critical Chain Project Management using the principal-agent theory, to encourage the completion of CCPM methods as well as imitative free-riding on the creative ideas of other members in the team.

  11. Approximation of Convex Bodies by Convex Bodies%凸体间的逼近

    Institute of Scientific and Technical Information of China (English)

    国起; Sten Kaijser

    2003-01-01

    For the affine distance d(C,D)between two convex bodies C,D(∈)Rn,which reduces to the Banach-Mazur distance for symmetric convex bodies, the bounds of d(C,D)have been studied for many years. Some well known estimates for the upper-bounds are as follows: F. John proved d(C,D)≤n1/2 if one is an ellipsoid and another is symmetric,d(C,D)≤n if both are symmetric, and fromF. John's result and d(C1,C2)≤d(C1,C3)d(C2,C3) one has d(C,D)≤n2 for general convex bodies;M.Lassak proved d(C,D)≤(2n-1) if one of them is symmetric.In this paper we get an estimate which includes all the results above as special cases and refines some of them in terms of measures of asymmetry for convex bodies.

  12. Rapid Two-stage Versus One-stage Surgical Repair of Interrupted Aortic Arch with Ventricular Septal Defect in Neonates

    Directory of Open Access Journals (Sweden)

    Meng-Lin Lee

    2008-11-01

    Conclusion: The outcome of rapid two-stage repair is comparable to that of one-stage repair. Rapid two-stage repair has the advantages of significantly shorter cardiopulmonary bypass duration and AXC time, and avoids deep hypothermic circulatory arrest. LVOTO remains an unresolved issue, and postoperative aortic arch restenosis can be dilated effectively by percutaneous balloon angioplasty.

  13. Two-Stage Nerve Graft in Severe Scar: A Time-Course Study in a Rat Model

    Directory of Open Access Journals (Sweden)

    Shayan Zadegan

    2015-04-01

    According to the EPT and WRL, the two-stage nerve graft showed significant improvement (P=0.020 and P =0.017 respectively. The TOA showed no significant difference between the two groups. The total vascular index was significantly higher in the two-stage nerve graft group (P

  14. Error bound results for convex inequality systems via conjugate duality

    CERN Document Server

    Bot, Radu Ioan

    2010-01-01

    The aim of this paper is to implement some new techniques, based on conjugate duality in convex optimization, for proving the existence of global error bounds for convex inequality systems. We deal first of all with systems described via one convex inequality and extend the achieved results, by making use of a celebrated scalarization function, to convex inequality systems expressed by means of a general vector function. We also propose a second approach for guaranteeing the existence of global error bounds of the latter, which meanwhile sharpens the classical result of Robinson.

  15. Long Wave Dynamics along a Convex Bottom

    CERN Document Server

    Didenkulova, Ira; Soomere, Tarmo

    2008-01-01

    Long linear wave transformation in the basin of varying depth is studied for a case of a convex bottom profile in the framework of one-dimensional shallow water equation. The existence of travelling wave solutions in this geometry and the uniqueness of this wave class is established through construction of a 1:1 transformation of the general 1D wave equation to the analogous wave equation with constant coefficients. The general solution of the Cauchy problem consists of two travelling waves propagating in opposite directions. It is found that generally a zone of a weak current is formed between these two waves. Waves are reflected from the coastline so that their profile is inverted with respect to the calm water surface. Long wave runup on a beach with this profile is studied for sine pulse, KdV soliton and N-wave. Shown is that in certain cases the runup height along the convex profile is considerably larger than for beaches with a linear slope. The analysis of wave reflection from the bottom containing a s...

  16. Molecular Graphics of Convex Body Fluids.

    Science.gov (United States)

    Gabriel, Adrian T; Meyer, Timm; Germano, Guido

    2008-03-01

    Coarse-grained modeling of molecular fluids is often based on nonspherical convex rigid bodies like ellipsoids or spherocylinders representing rodlike or platelike molecules or groups of atoms, with site-site interaction potentials depending both on the distance among the particles and the relative orientation. In this category of potentials, the Gay-Berne family has been studied most extensively. However, conventional molecular graphics programs are not designed to visualize such objects. Usually the basic units are atoms displayed as spheres or as vertices in a graph. Atomic aggregates can be highlighted through an increasing amount of stylized representations, e.g., Richardson ribbon diagrams for the secondary structure of proteins, Connolly molecular surfaces, density maps, etc., but ellipsoids and spherocylinders are generally missing, especially as elementary simulation units. We fill this gap providing and discussing a customized OpenGL-based program for the interactive, rendered representation of large ensembles of convex bodies, useful especially in liquid crystal research. We pay particular attention to the performance issues for typical system sizes in this field. The code is distributed as open source.

  17. Two-stage unilateral versus one-stage bilateral single-port sympathectomy for palmar and axillary hyperhidrosis†

    Science.gov (United States)

    Ibrahim, Mohsen; Menna, Cecilia; Andreetti, Claudio; Ciccone, Anna Maria; D'Andrilli, Antonio; Maurizi, Giulio; Poggi, Camilla; Vanni, Camilla; Venuta, Federico; Rendina, Erino Angelo

    2013-01-01

    OBJECTIVES Video-assisted thoracoscopic sympathectomy is currently the best treatment for palmar and axillary hyperhidrosis. It can be performed through either one or two stages of surgery. This study aimed to evaluate the operative and postoperative results of two-stage unilateral vs one-stage bilateral thoracoscopic sympathectomy. METHODS From November 1995 to February 2011, 270 patients with severe palmar and/or axillary hyperhidrosis were recruited for this study. One hundred and thirty patients received one-stage bilateral, single-port video-assisted thoracoscopic sympathectomy (one-stage group) and 140, two-stage unilateral, single-port video-assisted thoracoscopic sympathectomy, with a mean time interval of 4 months between the procedures (two-stage group). RESULTS The mean postoperative follow-up period was 12.5 (range: 1–24 months). After surgery, hands and axillae of all patients were dry and warm. Sixteen (12%) patients of the one-stage group and 15 (11%) of the two-stage group suffered from mild/moderate pain (P = 0.8482). The mean operative time was 38 ± 5 min in the one-stage group and 39 ± 8 min in the two-stage group (P = 0.199). Pneumothorax occurred in 8 (6%) patients of the one-stage group and in 11 (8%) of the two-stage group. Compensatory sweating occurred in 25 (19%) patients of the one-stage group and in 6 (4%) of the two-stage group (P = 0.0001). No patients developed Horner's syndrome. CONCLUSIONS Both two-stage unilateral and one-stage bilateral single-port video-assisted thoracoscopic sympathectomies are effective, safe and minimally invasive procedures. Two-stage unilateral sympathectomy can be performed with a lower occurrence of compensatory sweating, improving permanently the quality of life in patients with palmar and axillary hyperhidrosis. PMID:23442937

  18. Two-stage unilateral versus one-stage bilateral single-port sympathectomy for palmar and axillary hyperhidrosis.

    Science.gov (United States)

    Ibrahim, Mohsen; Menna, Cecilia; Andreetti, Claudio; Ciccone, Anna Maria; D'Andrilli, Antonio; Maurizi, Giulio; Poggi, Camilla; Vanni, Camilla; Venuta, Federico; Rendina, Erino Angelo

    2013-06-01

    Video-assisted thoracoscopic sympathectomy is currently the best treatment for palmar and axillary hyperhidrosis. It can be performed through either one or two stages of surgery. This study aimed to evaluate the operative and postoperative results of two-stage unilateral vs one-stage bilateral thoracoscopic sympathectomy. From November 1995 to February 2011, 270 patients with severe palmar and/or axillary hyperhidrosis were recruited for this study. One hundred and thirty patients received one-stage bilateral, single-port video-assisted thoracoscopic sympathectomy (one-stage group) and 140, two-stage unilateral, single-port video-assisted thoracoscopic sympathectomy, with a mean time interval of 4 months between the procedures (two-stage group). The mean postoperative follow-up period was 12.5 (range: 1-24 months). After surgery, hands and axillae of all patients were dry and warm. Sixteen (12%) patients of the one-stage group and 15 (11%) of the two-stage group suffered from mild/moderate pain (P = 0.8482). The mean operative time was 38 ± 5 min in the one-stage group and 39 ± 8 min in the two-stage group (P = 0.199). Pneumothorax occurred in 8 (6%) patients of the one-stage group and in 11 (8%) of the two-stage group. Compensatory sweating occurred in 25 (19%) patients of the one-stage group and in 6 (4%) of the two-stage group (P = 0.0001). No patients developed Horner's syndrome. Both two-stage unilateral and one-stage bilateral single-port video-assisted thoracoscopic sympathectomies are effective, safe and minimally invasive procedures. Two-stage unilateral sympathectomy can be performed with a lower occurrence of compensatory sweating, improving permanently the quality of life in patients with palmar and axillary hyperhidrosis.

  19. Two-stage atlas subset selection in multi-atlas based image segmentation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Tingting, E-mail: tingtingzhao@mednet.ucla.edu; Ruan, Dan, E-mail: druan@mednet.ucla.edu [The Department of Radiation Oncology, University of California, Los Angeles, California 90095 (United States)

    2015-06-15

    Purpose: Fast growing access to large databases and cloud stored data presents a unique opportunity for multi-atlas based image segmentation and also presents challenges in heterogeneous atlas quality and computation burden. This work aims to develop a novel two-stage method tailored to the special needs in the face of large atlas collection with varied quality, so that high-accuracy segmentation can be achieved with low computational cost. Methods: An atlas subset selection scheme is proposed to substitute a significant portion of the computationally expensive full-fledged registration in the conventional scheme with a low-cost alternative. More specifically, the authors introduce a two-stage atlas subset selection method. In the first stage, an augmented subset is obtained based on a low-cost registration configuration and a preliminary relevance metric; in the second stage, the subset is further narrowed down to a fusion set of desired size, based on full-fledged registration and a refined relevance metric. An inference model is developed to characterize the relationship between the preliminary and refined relevance metrics, and a proper augmented subset size is derived to ensure that the desired atlases survive the preliminary selection with high probability. Results: The performance of the proposed scheme has been assessed with cross validation based on two clinical datasets consisting of manually segmented prostate and brain magnetic resonance images, respectively. The proposed scheme demonstrates comparable end-to-end segmentation performance as the conventional single-stage selection method, but with significant computation reduction. Compared with the alternative computation reduction method, their scheme improves the mean and medium Dice similarity coefficient value from (0.74, 0.78) to (0.83, 0.85) and from (0.82, 0.84) to (0.95, 0.95) for prostate and corpus callosum segmentation, respectively, with statistical significance. Conclusions: The authors

  20. Two-stage vs single-stage management for concomitant gallstones and common bile duct stones

    Institute of Scientific and Technical Information of China (English)

    Jiong Lu; Yao Cheng; Xian-Ze Xiong; Yi-Xin Lin; Si-Jia Wu; Nan-Sheng Cheng

    2012-01-01

    AIM:To evaluate the safety and effectiveness of two-stage vs single-stage management for concomitant gallstones and common bile duct stones.METHODS:Four databases,including PubMed,Embase,the Cochrane Central Register of Controlled Trials and the Science Citation Index up to September 2011,were searched to identify all randomized controlled trials (RCTs).Data were extracted from the studies by two independent reviewers.The primary outcomes were stone clearance from the common bile duct,postoperative morbidity and mortality.The secondary outcomes were conversion to other procedures,number of procedures per patient,length of hospital stay,total operative time,hospitalization charges,patient acceptance and quality of life scores.RESULTS:Seven eligible RCTs [five trials (n =621)comparing preoperative endoscopic retrograde cholangiopancreatography (ERCP)/endoscopic sphincterotomy (EST) + laparoscopic cholecystectomy (LC) with LC +laparoscopic common bile duct exploration (LCBDE);two trials (n =166) comparing postoperative ERCP/EST + LC with LC + LCBDE],composed of 787 patients in total,were included in the final analysis.The metaanalysis detected no statistically significant difference between the two groups in stone clearance from the common bile duct [risk ratios (RR) =-0.10,95% confidence intervals (CI):-0.24 to 0.04,P =0.17],postoperative morbidity (RR =0.79,95% CI:0.58 to 1.10,P =0.16),mortality (RR =2.19,95% CI:0.33 to 14.67,P =0.42),conversion to other procedures (RR =1.21,95% CI:0.54 to 2.70,P =0.39),length of hospital stay (MD =0.99,95% CI:-1.59 to 3.57,P =0.45),total operative time (MD =12.14,95% CI:-1.83 to 26.10,P =0.09).Two-stage (LC + ERCP/EST) management clearly required more procedures per patient than single-stage (LC + LCBDE) management.CONCLUSION:Single-stage management is equivalent to two-stage management but requires fewer procedures.However,patient's condition,operator's expertise and local resources should be taken into account in

  1. Two-stage dilute-acid and organic-solvent lignocellulosic pretreatment for enhanced bioprocessing

    Energy Technology Data Exchange (ETDEWEB)

    Brodeur, G.; Telotte, J.; Stickel, J. J.; Ramakrishnan, S.

    2016-11-01

    A two stage pretreatment approach for biomass is developed in the current work in which dilute acid (DA) pretreatment is followed by a solvent based pretreatment (N-methyl morpholine N oxide -- NMMO). When the combined pretreatment (DAWNT) is applied to sugarcane bagasse and corn stover, the rates of hydrolysis and overall yields (>90%) are seen to dramatically improve and under certain conditions 48 h can be taken off the time of hydrolysis with the additional NMMO step to reach similar conversions. DAWNT shows a 2-fold increase in characteristic rates and also fractionates different components of biomass -- DA treatment removes the hemicellulose while the remaining cellulose is broken down by enzymatic hydrolysis after NMMO treatment to simple sugars. The remaining residual solid is high purity lignin. Future work will focus on developing a full scale economic analysis of DAWNT for use in biomass fractionation.

  2. Reconstruction of Gene Regulatory Networks Based on Two-Stage Bayesian Network Structure Learning Algorithm

    Institute of Scientific and Technical Information of China (English)

    Gui-xia Liu; Wei Feng; Han Wang; Lei Liu; Chun-guang Zhou

    2009-01-01

    In the post-genomic biology era, the reconstruction of gene regulatory networks from microarray gene expression data is very important to understand the underlying biological system, and it has been a challenging task in bioinformatics. The Bayesian network model has been used in reconstructing the gene regulatory network for its advantages, but how to determine the network structure and parameters is still important to be explored. This paper proposes a two-stage structure learning algorithm which integrates immune evolution algorithm to build a Bayesian network .The new algorithm is evaluated with the use of both simulated and yeast cell cycle data. The experimental results indicate that the proposed algorithm can find many of the known real regulatory relationships from literature and predict the others unknown with high validity and accuracy.

  3. The Application of Two-stage Structure Decomposition Technique to the Study of Industrial Carbon Emissions

    Institute of Scientific and Technical Information of China (English)

    Yanqiu HE

    2015-01-01

    The total carbon emissions control is the ultimate goal of carbon emission reduction, while industrial carbon emissions are the basic units of the total carbon emission. On the basis of existing research results, in this paper, a two-stage input-output structure decomposition method is creatively proposed for fully combining the input-output method with the structure decomposition technique. In this study, more comprehensive technical progress indicators were chosen in comparison with the previous studies and included the utilization efficiency of all kinds of intermediate inputs such as energy and non-energy products, and finally were positioned at the factors affecting the carbon emissions of different industries. Through analysis, the affecting rate of each factor on industrial carbon emissions was acquired. Thus, a theory basis and data support is provided for the total carbon emissions control of China from the perspective of industrial emissions.

  4. A two-stage metal valorisation process from electric arc furnace dust (EAFD

    Directory of Open Access Journals (Sweden)

    H. Issa

    2016-04-01

    Full Text Available This paper demonstrates possibility of separate zinc and lead recovery from coal composite pellets, composed of EAFD with other synergetic iron-bearing wastes and by-products (mill scale, pyrite-cinder, magnetite concentrate, through a two-stage process. The results show that in the first, low temp erature stage performed in electro-resistant furnace, removal of lead is enabled due to presence of chlorides in the system. In the second stage, performed at higher temperatures in Direct Current (DC plasma furnace, valorisation of zinc is conducted. Using this process, several final products were obtained, including a higher purity zinc oxide, which, by its properties, corresponds washed Waelz oxide.

  5. A wavelet-based two-stage near-lossless coder.

    Science.gov (United States)

    Yea, Sehoon; Pearlman, William A

    2006-11-01

    In this paper, we present a two-stage near-lossless compression scheme. It belongs to the class of "lossy plus residual coding" and consists of a wavelet-based lossy layer followed by arithmetic coding of the quantized residual to guarantee a given L(infinity) error bound in the pixel domain. We focus on the selection of the optimum bit rate for the lossy layer to achieve the minimum total bit rate. Unlike other similar lossy plus lossless approaches using a wavelet-based lossy layer, the proposed method does not require iteration of decoding and inverse discrete wavelet transform in succession to locate the optimum bit rate. We propose a simple method to estimate the optimal bit rate, with a theoretical justification based on the critical rate argument from the rate-distortion theory and the independence of the residual error.

  6. Two-Stage Over-the-Air (OTA Test Method for LTE MIMO Device Performance Evaluation

    Directory of Open Access Journals (Sweden)

    Ya Jing

    2012-01-01

    Full Text Available With MIMO technology being adopted by the wireless communication standards LTE and HSPA+, MIMO OTA research has attracted wide interest from both industry and academia. Parallel studies are underway in COST2100, CTIA, and 3GPP RAN WG4. The major test challenge for MIMO OTA is how to create a repeatable scenario which accurately reflects the MIMO antenna radiation performance in a realistic wireless propagation environment. Different MIMO OTA methods differ in the way to reproduce a specified MIMO channel model. This paper introduces a novel, flexible, and cost-effective method for measuring MIMO OTA using a two-stage approach. In the first stage, the antenna pattern is measured in an anechoic chamber using a nonintrusive approach, that is without cabled connections or modifying the device. In the second stage, the antenna pattern is convolved with the chosen channel model in a channel emulator to measure throughput using a cabled connection.

  7. Two stages of parafoveal processing during reading: Evidence from a display change detection task.

    Science.gov (United States)

    Angele, Bernhard; Slattery, Timothy J; Rayner, Keith

    2016-08-01

    We used a display change detection paradigm (Slattery, Angele, & Rayner Human Perception and Performance, 37, 1924-1938 2011) to investigate whether display change detection uses orthographic regularity and whether detection is affected by the processing difficulty of the word preceding the boundary that triggers the display change. Subjects were significantly more sensitive to display changes when the change was from a nonwordlike preview than when the change was from a wordlike preview, but the preview benefit effect on the target word was not affected by whether the preview was wordlike or nonwordlike. Additionally, we did not find any influence of preboundary word frequency on display change detection performance. Our results suggest that display change detection and lexical processing do not use the same cognitive mechanisms. We propose that parafoveal processing takes place in two stages: an early, orthography-based, preattentional stage, and a late, attention-dependent lexical access stage.

  8. Enhanced biodiesel production in Neochloris oleoabundans by a semi-continuous process in two stage photobioreactors.

    Science.gov (United States)

    Yoon, Se Young; Hong, Min Eui; Chang, Won Seok; Sim, Sang Jun

    2015-07-01

    Under autotrophic conditions, highly productive biodiesel production was achieved using a semi-continuous culture system in Neochloris oleoabundans. In particular, the flue gas generated by combustion of liquefied natural gas and natural solar radiation were used for cost-effective microalgal culture system. In semi-continuous culture, the greater part (~80%) of the culture volume containing vegetative cells grown under nitrogen-replete conditions in a first photobioreactor (PBR) was directly transferred to a second PBR and cultured sequentially under nitrogen-deplete conditions for accelerating oil accumulation. As a result, in semi-continuous culture, the productivities of biomass and biodiesel in the cells were increased by 58% (growth phase) and 51% (induction phase) compared to the cells in batch culture, respectively. The semi-continuous culture system using two stage photobioreactors is a very efficient strategy to further improve biodiesel production from microalgae under photoautotrophic conditions.

  9. The Sources of Efficiency of the Nigerian Banking Industry: A Two- Stage Approach

    Directory of Open Access Journals (Sweden)

    Frances Obafemi

    2013-11-01

    Full Text Available The paper employed a two-stage Data Envelopment Analysis (DEA approach to examine the sources oftechnical efficiency in the Nigerian banking sub-sector. Using a cross sectionof commercial and merchant banks, the study showed that the Nigerian bankingindustry was not efficient both in the pre-and-post-liberalization era. Thestudy further revealed that market share was the strongest determinant oftechnical efficiency in the Nigerian banking Industry. Thus, appropriatemacroeconomic policy, institutional development and structural reforms mustaccompany financial liberalization to create the stable environment requiredfor it to succeed. Hence, the present bank consolidation and reforms by theCentral Bank of Nigeria, which started with Soludo and continued with Sanusi,are considered necessary, especially in the areas of e banking and reorganizingthe management of banks.

  10. Two-stage triolein breath test differentiates pancreatic insufficiency from other causes of malabsorption

    Energy Technology Data Exchange (ETDEWEB)

    Goff, J.S.

    1982-07-01

    In 24 patients with malabsorption, (/sup 14/C)triolein breath tests were conducted before and together with the administration of pancreatic enzymes (Pancrease, Johnson and Johnson, Skillman, N.J.). Eleven patients with pancreatic insufficiency had a significant rise in peak percent dose per hour /sup 14/CO/sub 2/ excretion after Pancrease, whereas 13 patients with other causes of malabsorption had no increase in /sup 14/CO/sub 2/ excretion (2.61 +/- 0.96 vs. 0.15 +/- 0.45, p less than 0.001). The two-stage (/sup 14/C)triolein breath test appears to be an accurate and simple noninvasive test of fat malabsorption that differentiates steatorrhea secondary to pancreatic insufficiency from other causes of steatorrhea.

  11. Heuristic for Critical Machine Based a Lot Streaming for Two-Stage Hybrid Production Environment

    Science.gov (United States)

    Vivek, P.; Saravanan, R.; Chandrasekaran, M.; Pugazhenthi, R.

    2017-03-01

    Lot streaming in Hybrid flowshop [HFS] is encountered in many real world problems. This paper deals with a heuristic approach for Lot streaming based on critical machine consideration for a two stage Hybrid Flowshop. The first stage has two identical parallel machines and the second stage has only one machine. In the second stage machine is considered as a critical by valid reasons these kind of problems is known as NP hard. A mathematical model developed for the selected problem. The simulation modelling and analysis were carried out in Extend V6 software. The heuristic developed for obtaining optimal lot streaming schedule. The eleven cases of lot streaming were considered. The proposed heuristic was verified and validated by real time simulation experiments. All possible lot streaming strategies and possible sequence under each lot streaming strategy were simulated and examined. The heuristic consistently yielded optimal schedule consistently in all eleven cases. The identification procedure for select best lot streaming strategy was suggested.

  12. Product prioritization in a two-stage food production system with intermediate storage

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2007-01-01

    In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the dedi......In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

  13. Experimental and modeling study of a two-stage pilot scale high solid anaerobic digester system.

    Science.gov (United States)

    Yu, Liang; Zhao, Quanbao; Ma, Jingwei; Frear, Craig; Chen, Shulin

    2012-11-01

    This study established a comprehensive model to configure a new two-stage high solid anaerobic digester (HSAD) system designed for highly degradable organic fraction of municipal solid wastes (OFMSW). The HSAD reactor as the first stage was naturally separated into two zones due to biogas floatation and low specific gravity of solid waste. The solid waste was retained in the upper zone while only the liquid leachate resided in the lower zone of the HSAD reactor. Continuous stirred-tank reactor (CSTR) and advective-diffusive reactor (ADR) models were constructed in series to describe the whole system. Anaerobic digestion model No. 1 (ADM1) was used as reaction kinetics and incorporated into each reactor module. Compared with the experimental data, the simulation results indicated that the model was able to well predict the pH, volatile fatty acid (VFA) and biogas production.

  14. Study of a two-stage photobase generator for photolithography in microelectronics.

    Science.gov (United States)

    Turro, Nicholas J; Li, Yongjun; Jockusch, Steffen; Hagiwara, Yuji; Okazaki, Masahiro; Mesch, Ryan A; Schuster, David I; Willson, C Grant

    2013-03-01

    The investigation of the photochemistry of a two-stage photobase generator (PBG) is described. Absorption of a photon by a latent PBG (1) (first step) produces a PBG (2). Irradiation of 2 in the presence of water produces a base (second step). This two-photon sequence (1 + hν → 2 + hν → base) is an important component in the design of photoresists for pitch division technology, a method that doubles the resolution of projection photolithography for the production of microelectronic chips. In the present system, the excitation of 1 results in a Norrish type II intramolecular hydrogen abstraction to generate a 1,4-biradiacal that undergoes cleavage to form 2 and acetophenone (Φ ∼ 0.04). In the second step, excitation of 2 causes cleavage of the oxime ester (Φ = 0.56) followed by base generation after reaction with water.

  15. ADM1-based modeling of methane production from acidified sweet sorghum extractin a two stage process

    DEFF Research Database (Denmark)

    Antonopoulou, Georgia; Gavala, Hariklia N.; Skiadas, Ioannis

    2012-01-01

    The present study focused on the application of the Anaerobic Digestion Model 1 οn the methane production from acidified sorghum extract generated from a hydrogen producing bioreactor in a two-stage anaerobic process. The kinetic parameters for hydrogen and volatile fatty acids consumption were...... estimated through fitting of the model equations to the data obtained from batch experiments. The simulation of the continuous reactor performance at all HRTs tested (20, 15 and 10d) was very satisfactory. Specifically, the largest deviation of the theoretical predictions against the experimental data...... was 12% for the methane production rate at the HRT of 20d while the deviation values for the 15 and 10 d HRT were 1.9% and 1.1%, respectively. The model predictions regarding pH, methane percentage in the gas phase and COD removal were in very good agreement with the experimental data with a deviation...

  16. A Two-Stage Diagnosis Framework for Wind Turbine Gearbox Condition Monitoring

    Directory of Open Access Journals (Sweden)

    Janet M. Twomey

    2013-01-01

    Full Text Available Advances in high performance sensing technologies enable the development of wind turbine condition monitoring system to diagnose and predict the system-wide effects of failure events. This paper presents a vibration-based two stage fault detection framework for failure diagnosis of rotating components in wind turbines. The proposed framework integrates an analytical defect detection method and a graphical verification method together to ensure the diagnosis efficiency and accuracy. The efficacy of the proposed methodology is demonstrated with a case study with the gearbox condition monitoring Round Robin study dataset provided by the National Renewable Energy Laboratory (NREL. The developed methodology successfully picked five faults out of seven in total with accurate severity levels without producing any false alarm in the blind analysis. The case study results indicated that the developed fault detection framework is effective for analyzing gear and bearing faults in wind turbine drive train system based upon system vibration characteristics.

  17. Nitrification and microalgae cultivation for two-stage biological nutrient valorization from source separated urine.

    Science.gov (United States)

    Coppens, Joeri; Lindeboom, Ralph; Muys, Maarten; Coessens, Wout; Alloul, Abbas; Meerbergen, Ken; Lievens, Bart; Clauwaert, Peter; Boon, Nico; Vlaeminck, Siegfried E

    2016-07-01

    Urine contains the majority of nutrients in urban wastewaters and is an ideal nutrient recovery target. In this study, stabilization of real undiluted urine through nitrification and subsequent microalgae cultivation were explored as strategy for biological nutrient recovery. A nitrifying inoculum screening revealed a commercial aquaculture inoculum to have the highest halotolerance. This inoculum was compared with municipal activated sludge for the start-up of two nitrification membrane bioreactors. Complete nitrification of undiluted urine was achieved in both systems at a conductivity of 75mScm(-1) and loading rate above 450mgNL(-1)d(-1). The halotolerant inoculum shortened the start-up time with 54%. Nitrite oxidizers showed faster salt adaptation and Nitrobacter spp. became the dominant nitrite oxidizers. Nitrified urine as growth medium for Arthrospira platensis demonstrated superior growth compared to untreated urine and resulted in a high protein content of 62%. This two-stage strategy is therefore a promising approach for biological nutrient recovery.

  18. STOCHASTIC DISCRETE MODEL OF TWO-STAGE ISOLATION SYSTEM WITH RIGID LIMITERS

    Institute of Scientific and Technical Information of China (English)

    HE Hua; FENG Qi; SHEN Rong-ying; WANG Yu

    2006-01-01

    The possible intermittent impacts of a two-stage isolation system with rigid limiters have been investigated. The isolation system is under periodic external excitation disturbed by small stationary Gaussian white noise after shock. The maximal impact Then in the period after shock, the zero order approximate stochastic discrete model and the first order approximate stochastic model are developed. The real isolation system of an MTU diesel engine is used to evaluate the established model. After calculating of the numerical example, the effects of noise excitation on the isolation system are discussed.The results show that the property of the system is complicated due to intermittent impact. The difference between zero order model and the first order model may be great.The effect of small noise is obvious. The results may be expected useful to the naval designers.

  19. Two-stage high frequency pulse tube cooler for refrigeration at 25 K

    CERN Document Server

    Dietrich, M

    2009-01-01

    A two-stage Stirling-type U-shape pulse tube cryocooler driven by a 10 kW-class linear compressor was designed, built and tested. A special feature of the cold head is the absence of a heat exchanger at the cold end of the first stage, since the intended application requires no cooling power at an intermediate temperature. Simulations where done using Sage-software to find optimum operating conditions and cold head geometry. Flow-impedance matching was required to connect the compressor designed for 60 Hz operation to the 40 Hz cold head. A cooling power of 12.9 W at 25 K with an electrical input power of 4.6 kW has been achieved up to now. The lowest temperature reached is 13.7 K.

  20. Two-stage reflective optical system for achromatic 10 nm x-ray focusing

    Science.gov (United States)

    Motoyama, Hiroto; Mimura, Hidekazu

    2015-12-01

    Recently, coherent x-ray sources have promoted developments of optical systems for focusing, imaging, and interferometers. In this paper, we propose a two-stage focusing optical system with the goal of achromatically focusing pulses from an x-ray free-electron laser (XFEL), with a focal width of 10 nm. In this optical system, the x-ray beam is expanded by a grazing-incidence aspheric mirror, and it is focused by a mirror that is shaped as a solid of revolution. We describe the design procedure and discuss the theoretical focusing performance. In theory, soft-XFEL lights can be focused to a 10 nm area without chromatic aberration and with high reflectivity; this creates an unprecedented power density of 1020 W cm-2 in the soft-x-ray range.

  1. A Sensorless Power Reserve Control Strategy for Two-Stage Grid-Connected PV Systems

    DEFF Research Database (Denmark)

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede

    2017-01-01

    Due to the still increasing penetration of grid-connected Photovoltaic (PV) systems, advanced active power control functionalities have been introduced in grid regulations. A power reserve control, where namely the active power from the PV panels is reserved during operation, is required for grid...... to achieve the power reserve. In this method, the solar irradiance and temperature measurements that have been used in conventional power reserve control schemes to estimate the available PV power are not required, and thereby being a sensorless approach with reduced cost. Experimental tests have been...... support. In this paper, a cost-effective solution to realize the power reserve for two-stage grid-connected PV systems is proposed. The proposed solution routinely employs a Maximum Power Point Tracking (MPPT) control to estimate the available PV power and a Constant Power Generation (CPG) control...

  2. Sensorless Reserved Power Control Strategy for Two-Stage Grid-Connected Photovoltaic Systems

    DEFF Research Database (Denmark)

    Sangwongwanich, Ariya; Yang, Yongheng; Blaabjerg, Frede

    2016-01-01

    Due to still increasing penetration level of grid-connected Photovoltaic (PV) systems, advanced active power control functionalities have been introduced in grid regulations. A reserved power control, where the active power from the PV panels is reserved during operation, is required for grid...... to achieve the power reserve. In this method, the irradiance measurements that have been used in conventional control schemes to estimate the available PV power are not required, and thereby being a sensorless solution. Simulations and experimental tests have been performed on a 3-kW two-stage single...... support. In this paper, a cost-effective solution to realize the reserved power control for grid-connected PV systems is proposed. The proposed solution routinely employs a Maximum Power Point Tracking (MPPT) control to estimate the available PV power and a Constant Power Generation (CPG) control...

  3. Prey-Predator Model with Two-Stage Infection in Prey: Concerning Pest Control

    Directory of Open Access Journals (Sweden)

    Swapan Kumar Nandi

    2015-01-01

    Full Text Available A prey-predator model system is developed; specifically the disease is considered into the prey population. Here the prey population is taken as pest and the predators consume the selected pest. Moreover, we assume that the prey species is infected with a viral disease forming into susceptible and two-stage infected classes, and the early stage of infected prey is more vulnerable to predation by the predator. Also, it is assumed that the later stage of infected pests is not eaten by the predator. Different equilibria of the system are investigated and their stability analysis and Hopf bifurcation of the system around the interior equilibriums are discussed. A modified model has been constructed by considering some alternative source of food for the predator population and the dynamical behavior of the modified model has been investigated. We have demonstrated the analytical results by numerical analysis by taking some simulated set of parameter values.

  4. Lossless and near-lossless digital angiography coding using a two-stage motion compensation approach.

    Science.gov (United States)

    dos Santos, Rafael A P; Scharcanski, Jacob

    2008-07-01

    This paper presents a two-stage motion compensation coding scheme for image sequences in hemodynamics. The first stage of the proposed method implements motion compensation, and the second stage corrects local pixel intensity distortions with a context adaptive linear predictor. The proposed method is robust to the local intensity distortions and the noise that often degrades these image sequences, providing lossless and near-lossless quality. Our experiments with lossless compression of 12bits/pixel studies indicate that, potentially, our approach can perform 3.8%, 2% and 1.6% better than JPEG-2000, JPEG-LS and the method proposed by Scharcanski [1], respectively. The performance tends to improve for near-lossless compression. Therefore, this work presents experimental evidence that for coding image sequences in hemodynamics, an adequate motion compensation scheme can be more efficient than the still-image coding methods often used nowadays.

  5. Quasi-estimation as a Basis for Two-stage Solving of Regression Problem

    CERN Document Server

    Gordinsky, Anatoly

    2010-01-01

    An effective two-stage method for an estimation of parameters of the linear regression is considered. For this purpose we introduce a certain quasi-estimator that, in contrast to usual estimator, produces two alternative estimates. It is proved that, in comparison to the least squares estimate, one alternative has a significantly smaller quadratic risk, retaining at the same time unbiasedness and consistency. These properties hold true for one-dimensional, multi-dimensional, orthogonal and non-orthogonal problems. Moreover, a Monte-Carlo simulation confirms high robustness of the quasi-estimator to violations of the initial assumptions. Therefore, at the first stage of the estimation we calculate mentioned two alternative estimates. At the second stage we choose the better estimate out of these alternatives. In order to do so we use additional information, among it but not exclusively of a priori nature. In case of two alternatives the volume of such information should be minimal. Furthermore, the additional ...

  6. A characteristics study on the performance of a two-stage light gas gun

    Institute of Scientific and Technical Information of China (English)

    吴应湘; 郑之初; P.Kupschus

    1995-01-01

    In order to obtain an overall and systematic understanding of the performance of a two-stage light gas gun (TLGG), a numerical code to simulate the process occurring in a gun shot is advanced based on the quasi-one-dimensional unsteady equations of motion with the real gas effect, friction and heat transfer taken into account in a characteristic formulation for both driver and propellant gas. Comparisons of projectile velocities and projectile pressures along the barrel with experimental results from JET (Joint European Torus) and with computational data got by the Lagrangian method indicate that this code can provide results with good accuracy over a wide range of gun geometry and loading conditions.

  7. A Two-Stage Approach for Medical Supplies Intermodal Transportation in Large-Scale Disaster Responses

    Directory of Open Access Journals (Sweden)

    Junhu Ruan

    2014-10-01

    Full Text Available We present a two-stage approach for the “helicopters and vehicles” intermodal transportation of medical supplies in large-scale disaster responses. In the first stage, a fuzzy-based method and its heuristic algorithm are developed to select the locations of temporary distribution centers (TDCs and assign medial aid points (MAPs to each TDC. In the second stage, an integer-programming model is developed to determine the delivery routes. Numerical experiments verified the effectiveness of the approach, and observed several findings: (i More TDCs often increase the efficiency and utility of medical supplies; (ii It is not definitely true that vehicles should load more and more medical supplies in emergency responses; (iii The more contrasting the traveling speeds of helicopters and vehicles are, the more advantageous the intermodal transportation is.

  8. A Two-Stage LGSM for Three-Point BVPs of Second-Order ODEs

    Directory of Open Access Journals (Sweden)

    Chein-Shan Liu

    2008-08-01

    Full Text Available The study in this paper is a numerical integration of second-order three-point boundary value problems under two imposed nonlocal boundary conditions at t=t0, t=ξ, and t=t1 in a general setting, where t0<ξtwo-stage Lie-group shooting method for finding unknown initial conditions, which are obtained through an iterative solution of derived algebraic equations in terms of a weighting factor r∈(0,1. The best r is selected by matching the target with a minimal discrepancy. Numerical examples are examined to confirm that the new approach has high efficiency and accuracy with a fast speed of convergence. Even for multiple solutions, the present method is also effective to find them.

  9. A Two-Stage LGSM for Three-Point BVPs of Second-Order ODEs

    Directory of Open Access Journals (Sweden)

    Liu Chein-Shan

    2008-01-01

    Full Text Available Abstract The study in this paper is a numerical integration of second-order three-point boundary value problems under two imposed nonlocal boundary conditions at , , and in a general setting, where . We construct a two-stage Lie-group shooting method for finding unknown initial conditions, which are obtained through an iterative solution of derived algebraic equations in terms of a weighting factor . The best is selected by matching the target with a minimal discrepancy. Numerical examples are examined to confirm that the new approach has high efficiency and accuracy with a fast speed of convergence. Even for multiple solutions, the present method is also effective to find them.

  10. Shaft Position Influence on Technical Characteristics of Universal Two-Stages Helical Speed Reducers

    Directory of Open Access Journals (Sweden)

    Мilan Rackov

    2005-10-01

    Full Text Available Purchasers of speed reducers decide on buying those reducers, that can the most approximately satisfy their demands with much smaller costs. Amount of used material, ie. mass and dimensions of gear unit influences on gear units price. Mass and dimensions of gear unit, besides output torque, gear unit ratio and efficiency, are the most important parameters of technical characteristics of gear units and their quality. Centre distance and position of shafts have significant influence on output torque, gear unit ratio and mass of gear unit through overall dimension of gear unit housing. Thus these characteristics are dependent on each other. This paper deals with analyzing of centre distance and shaft position influence on output torque and ratio of universal two stages gear units.

  11. A Two-stage Tuning Method of Servo Parameters for Feed Drives in Machine Tools

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the evaluation of dynamic performance for feed drives in machine tools, this paper presents a two-stage tuning method of servo parameters. In the first stage, the evaluation of dynamic performance, parameter tuning and optimization on a mechatronic integrated system simulation platform of feed drives are performed. As a result, a servo parameter combination is acquired. In the second stage, the servo parameter combination from the first stage is set and tuned further in a real machine tool whose dynamic performance is measured and evaluated using the cross grid encoder developed by Heidenhain GmbH. A case study shows that this method simplifies the test process effectively and results in a good dynamic performance in a real machine tool.

  12. Treatment of Domestic Sewage by Two-Stage-Bio-Contact Oxidation Process

    Institute of Scientific and Technical Information of China (English)

    LI Xiang-dong; FENG Qi-yan; LIU Zhong-wei; XIAO Xin; LIN Guo-hua

    2005-01-01

    Effects of hydraulic retention time (HRT) and gas volume on efficiency of wastewater treatment are discussed based on a simulation experiment in which the domestic swage was treated by the two-stage-bio-contact oxidation process. The result shows that the average CODcr, BOD5, suspended solid (SS), and ammonia-nitrogen removal rate are 94.5 %, 93.2 %, 91.7 % and 46.9 %, respectively, under the conditions of a total air/water ratio of 5: 1 , an air/water ratio of 3:1 for oxidation tank 1 and 2:1for oxidation tank 2 and a hydraulic retention time of 1 h for each stage. This method is suitable for domestic sewage treatment of residential community and small towns as well.

  13. Alignment and characterization of the two-stage time delay compensating XUV monochromator

    CERN Document Server

    Eckstein, Martin; Kubin, Markus; Yang, Chung-Hsin; Frassetto, Fabio; Poletto, Luca; Vrakking, Marc J J; Kornilov, Oleg

    2016-01-01

    We present the design, implementation and alignment procedure for a two-stage time delay compensating monochromator. The setup spectrally filters the radiation of a high-order harmonic generation source providing wavelength-selected XUV pulses with a bandwidth of 300 to 600~meV in the photon energy range of 3 to 50~eV. XUV pulses as short as $12\\pm3$~fs are demonstrated. Transmission of the 400~nm (3.1~eV) light facilitates precise alignment of the monochromator. This alignment strategy together with the stable mechanical design of the motorized beamline components enables us to automatically scan the XUV photon energ in pump-probe experiments that require XUV beam pointing stability. The performance of the beamline is demonstrated by the generation of IR-assisted sidebands in XUV photoionization of argon atoms.

  14. Final two-stage MOAO on-sky demonstration with CANARY

    Science.gov (United States)

    Gendron, E.; Morris, T.; Basden, A.; Vidal, F.; Atkinson, D.; Bitenc, U.; Buey, T.; Chemla, F.; Cohen, M.; Dickson, C.; Dipper, N.; Feautrier, P.; Gach, J.-L.; Gratadour, D.; Henry, D.; Huet, J.-M.; Morel, C.; Morris, S.; Myers, R.; Osborn, J.; Perret, D.; Reeves, A.; Rousset, G.; Sevin, A.; Stadler, E.; Talbot, G.; Todd, S.; Younger, E.

    2016-07-01

    CANARY is an on-sky Laser Guide Star (LGS) tomographic AO demonstrator in operation at the 4.2m William Herschel Telescope (WHT) in La Palma. From the early demonstration of open-loop tomography on a single deformable mirror using natural guide stars in 2010, CANARY has been progressively upgraded each year to reach its final goal in July 2015. It is now a two-stage system that mimics the future E-ELT: a GLAO-driven woofer based on 4 laser guide stars delivers a ground-layer compensated field to a figure sensor locked tweeter DM, that achieves the final on-axis tomographic compensation. We present the overall system, the control strategy and an overview of its on-sky performance.

  15. Performance of a highly loaded two stage axial-flow fan

    Science.gov (United States)

    Ruggeri, R. S.; Benser, W. A.

    1974-01-01

    A two-stage axial-flow fan with a tip speed of 1450 ft/sec (442 m/sec) and an overall pressure ratio of 2.8 was designed, built, and tested. At design speed and pressure ratio, the measured flow matched the design value of 184.2 lbm/sec (83.55kg/sec). The adiabatic efficiency at the design operating point was 85.7 percent. The stall margin at design speed was 10 percent. A first-bending-mode flutter of the second-stage rotor blades was encountered near stall at speeds between 77 and 93 percent of design, and also at high pressure ratios at speeds above 105 percent of design. A 5 deg closed reset of the first-stage stator eliminated second-stage flutter for all but a narrow speed range near 90 percent of design.

  16. A Two-stage Kalman Filter for Sensorless Direct Torque Controlled PM Synchronous Motor Drive

    Directory of Open Access Journals (Sweden)

    Boyu Yi

    2013-01-01

    Full Text Available This paper presents an optimal two-stage extended Kalman filter (OTSEKF for closed-loop flux, torque, and speed estimation of a permanent magnet synchronous motor (PMSM to achieve sensorless DTC-SVPWM operation of drive system. The novel observer is obtained by using the same transformation as in a linear Kalman observer, which is proposed by C.-S. Hsieh and F.-C. Chen in 1999. The OTSEKF is an effective implementation of the extended Kalman filter (EKF and provides a recursive optimum state estimation for PMSMs using terminal signals that may be polluted by noise. Compared to a conventional EKF, the OTSEKF reduces the number of arithmetic operations. Simulation and experimental results verify the effectiveness of the proposed OTSEKF observer for DTC of PMSMs.

  17. Synchronous rapid start-up of the methanation and anammox processes in two-stage ASBRs

    Science.gov (United States)

    Duan, Y.; Li, W. R.; Zhao, Y.

    2017-01-01

    The “methanation + anaerobic ammonia oxidation autotrophic denitrification” method was adopted by using anaerobic sequencing batch reactors (ASBRs) and realized a satisfactory synchronous removal of chemical oxygen demand (COD) and ammonia-nitrogen (NH4 +-N) in wastewater after 75 days operation. 90% of COD was removed at a COD load of 1.2 kg/(m3•d) and 90% of TN was removed at a TN load of 0.14 kg/(m3•d). The anammox reaction ratio was estimated to be 1: 1.32: 0.26. The results showed that synchronous rapid start-up of the methanation and anaerobic ammonia oxidation processes in two-stage ASBRs was feasible.

  18. a Remote Liquid Target Loading System for a Two-Stage Gas Gun

    Science.gov (United States)

    Gibson, L. L.; Bartram, B.; Dattelbaum, D. M.; Sheffield, S. A.; Stahl, D. B.

    2009-12-01

    A Remote Liquid Loading System (RLLS) was designed and tested for the application of loading high-hazard liquid materials into instrumented target cells for gas gun-driven plate impact experiments. These high hazard liquids tend to react with confining materials in a short period of time, degrading target assemblies and potentially building up pressure through the evolution of gas in the reactions. Therefore, the ability to load a gas gun target immediately prior to gun firing provides the most stable and reliable target fielding approach. We present the design and evaluation of an RLLS built for the LANL two-stage gas gun. The system has been used successfully to interrogate the shock initiation behavior of ˜98 wt% percent hydrogen peroxide (H2O2) solutions, using embedded electromagnetic gauges for measurement of shock wave profiles in-situ.

  19. Two-Stage Surgery for a Large Cervical Dumbbell Tumour in Neurofibromatosis 1: A Case Report

    Directory of Open Access Journals (Sweden)

    Mohd Ariff S

    2011-11-01

    Full Text Available Spinal neurofibromas occur sporadically and typically occur in association with neurofibromatosis 1. Patients afflicted with neurofibromatosis 1 usually present with involvement of several nerve roots. This report describes the case of a 14- year-old child with a large intraspinal, but extradural tumour with paraspinal extension, dumbbell neurofibroma of the cervical region extending from the C2 to C4 vertebrae. The lesions were readily detected by MR imaging and were successfully resected in a two-stage surgery. The time interval between the first and second surgery was one month. We provide a brief review of the literature regarding various surgical approaches, emphasising the utility of anterior and posterior approaches.

  20. Effekt of a two-stage nursing assesment and intervention - a randomized intervention study

    DEFF Research Database (Denmark)

    Rosted, Elizabeth Emilie; Poulsen, Ingrid; Hendriksen, Carsten

    to the geriatric outpatient clinic, community health centre, primary physician or arrangements with next-of-kin. Findings: Primary endpoints will be presented as unplanned readmission to ED; admission to nursing home; and death. Secondary endpoints will be presented as physical function; depressive symptoms......Background: Geriatric patients recently discharged from hospital are at risk of unplanned readmissions and admission to nursing home. When discharged directly from Emergency Department (ED) the risk increases, as time pressure often requires focus on the presenting problem, although 80...... % of geriatric patients have complex and often unresolved caring needs. The objective was to examine the effect of a two-stage nursing assessment and intervention to address the patients uncompensated problems given just after discharge from ED and one and six months after. Method: We conducted a prospective...

  1. Colorimetric characterization of liquid crystal display using an improved two-stage model

    Institute of Scientific and Technical Information of China (English)

    Yong Wang; Haisong Xu

    2006-01-01

    @@ An improved two-stage model of colorimetric characterization for liquid crystal display (LCD) was proposed. The model included an S-shape nonlinear function with four coefficients for each channel to fit the Tone reproduction curve (TRC), and a linear transfer matrix with black-level correction. To compare with the simple model (SM), gain-offset-gain (GOG), S-curve and three-one-dimensional look-up tables (3-1D LUTs) models, an identical LCD was characterized and the color differences were calculated and summarized using the set of 7 × 7 × 7 digital-to-analog converter (DAC) triplets as test data. The experimental results showed that the model was outperformed in comparison with the GOG and SM ones, and near to that of the S-curve model and 3-1D LUTs method.

  2. Fast Image Segmentation Based on a Two-Stage Geometrical Active Contour

    Institute of Scientific and Technical Information of China (English)

    肖昌炎; 张素; 陈亚珠

    2005-01-01

    A fast two-stage geometric active contour algorithm for image segmentation is developed. First, the Eikonal equation problem is quickly solved using an improved fast sweeping method, and a criterion of local minimum of area gradient (LMAG) is presented to extract the optimal arrival time. Then, the final time function is passed as an initial state to an area and length minimizing flow model, which adjusts the interface more accurately and prevents it from leaking. For object with complete and salient edge, using the first stage only is able to obtain an ideal result, and this results in a time complexity of O(M), where M is the number of points in each coordinate direction. Both stages are needed for convoluted shapes, but the computation cost can be drastically reduced. Efficiency of the algorithm is verified in segmentation experiments of real images with different feature.

  3. Parametric theoretical study of a two-stage solar organic Rankine cycle for RO desalination

    Energy Technology Data Exchange (ETDEWEB)

    Kosmadakis, G.; Manolakos, D.; Papadakis, G. [Department of Natural Resources and Agricultural Engineering, Agricultural University of Athens, 75 Iera Odos Street, 11855 Athens (Greece)

    2010-05-15

    The present work concerns the parametric study of an autonomous, two-stage solar organic Rankine cycle for RO desalination. The main goal of the current simulation is to estimate the efficiency, as well as to calculate the annual mechanical energy available for desalination in the considered cases, in order to evaluate the influence of various parameters on the performance of the system. The parametric study concerns the variation of different parameters, without changing actually the baseline case. The effect of the collectors' slope and the total number of evacuated tube collectors used, have been extensively examined. The total cost is also taken into consideration and is calculated for the different cases examined, along with the specific fresh water cost (EUR/m{sup 3}). (author)

  4. Removal of trichloroethylene (TCE) contaminated soil using a two-stage anaerobic-aerobic composting technique.

    Science.gov (United States)

    Ponza, Supat; Parkpian, Preeda; Polprasert, Chongrak; Shrestha, Rajendra P; Jugsujinda, Aroon

    2010-01-01

    The effect of organic carbon addition on remediation of trichloroethylene (TCE) contaminated clay soil was investigated using a two stage anaerobic-aerobic composting system. TCE removal rate and processes involved were determined. Uncontaminated clay soil was treated with composting materials (dried cow manure, rice husk and cane molasses) to represent carbon based treatments (5%, 10% and 20% OC). All treatments were spiked with TCE at 1,000 mg TCE/kg DW and incubated under anaerobic and mesophillic condition (35 degrees C) for 8 weeks followed by continuous aerobic condition for another 6 weeks. TCE dissipation, its metabolites and biogas composition were measured throughout the experimental period. Results show that TCE degradation depended upon the amount of organic carbon (OC) contained within the composting treatments/matrices. The highest TCE removal percentage (97%) and rate (75.06 micro Mole/kg DW/day) were obtained from a treatment of 10% OC composting matrices as compared to 87% and 27.75 micro Mole/kg DW/day for 20% OC, and 83% and 38.08 micro Mole/kg DW/day for soil control treatment. TCE removal rate was first order reaction kinetics. Highest degradation rate constant (k(1) = 0.035 day(- 1)) was also obtained from the 10% OC treatment, followed by 20% OC (k(1) = 0.026 day(- 1)) and 5% OC or soil control treatment (k(1) = 0.023 day(- 1)). The half-life was 20, 27 and 30 days, respectively. The overall results suggest that sequential two stages anaerobic-aerobic composting technique has potential for remediation of TCE in heavy texture soil, providing that easily biodegradable source of organic carbon is present.

  5. Two-Stage Surgical Treatment for Non-Union of a Shortened Osteoporotic Femur

    Directory of Open Access Journals (Sweden)

    Galal Zaki Said

    2013-01-01

    Full Text Available Introduction: We report a case of non-union with severe shortening of the femur following diaphysectomy for chronic osteomyelitis.Case Presentation: A boy, aged 16 years presented with a dangling and excessively short left lower limb. He was using an elbow crutch in his right hand to help him walk. He had a history of diaphysectomy for chronic osteomyelitis at the age of 9. Examination revealed a freely mobile non-union of the left femur. The femur was the seat of an 18 cm shortening and a 4 cm defect at the non-union site; the knee joint was ankylosed in extension. The tibia and fibula were 10 cm short. Considering the extensive shortening in the femur and tibia in addition to osteoporosis, he was treated in two stages. In stage I, the femoral non-union was treated by open reduction, internal fixation and iliac bone grafting. The patient was then allowed to walk with full weight bearing in an extension brace for 7 months. In Stage II, equalization of leg length discrepancy (LLD was achieved by simultaneous distraction of the femur and tibia by unilateral frames. At the 6 month follow- up, he was fully weight bearing without any walking aid, with a heel lift to compensate the 1.5 cm shortening. Three years later he reported that he was satisfied with the result of treatment and was leading a normal life as a university student.Conclusions: Two-stage treatment succeeded to restore about 20 cm of the femoral shortening in a severely osteoporotic bone. It has also succeeded in reducing the treatment time of the external fixator.

  6. Design and Characterization of two stage High-Speed CMOS Operational Amplifier

    Directory of Open Access Journals (Sweden)

    Rahul Chaudhari

    2014-03-01

    Full Text Available A method described in this paper is to design a Two Stage CMOS operational amplifier and analyze the effect of various aspect ratios on the characteristics of this Op-Amp, which operates at 1.8V power supply using tsmc 0.18μm CMOS technology. In this paper trade-off curves are computed between all characteristics such as Gain, PM, GBW, ICMRR, CMRR, Slew Rate etc. The OPAMP designed is a two-stage CMOS OPAMP. The OPAMP is designed to exhibit a unity gain frequency of 14MHz and exhibits a gain of 59.98dB with a 61.235 phase margin. Design has been carried out in Mentor graphics tools. Simulation results are verified using Model Sim Eldo and Design Architect IC. The task of CMOS operational amplifiers (Op-Amps design optimization is investigated in this work. This Paper focused on the optimization of various aspect ratios, which gave the result of different parameter. When this task is analyzed as a search problem, it can be translated into a multi-objective optimization application in which various Op-Amps’ specifications have to be taken into account, i.e., Gain, GBW (gain-bandwidth product, phase margin and others. The results are compared with respect to standard characteristics of the op-amp with the help of graph and table. Simulation results agree with theoretical predictions. Simulations confirm that the settling time can be further improved by increasing the value of GBW, the settling time is achieved 19ns. It has been demonstrated that when W/L increases the parameters GBW increases and settling time reduces.

  7. Anti-kindling Induced by Two-Stage Coordinated Reset Stimulation with Weak Onset Intensity

    Science.gov (United States)

    Zeitler, Magteld; Tass, Peter A.

    2016-01-01

    Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR) stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e., unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies. PMID:27242500

  8. Mineral chemistry of the Tissint meteorite: Indications of two-stage crystallization in a closed system

    Science.gov (United States)

    Liu, Yang; Baziotis, Ioannis P.; Asimow, Paul D.; Bodnar, Robert J.; Taylor, Lawrence A.

    2016-12-01

    The Tissint meteorite is a geochemically depleted, olivine-phyric shergottite. Olivine megacrysts contain 300-600 μm cores with uniform Mg# ( 80 ± 1) followed by concentric zones of Fe-enrichment toward the rims. We applied a number of tests to distinguish the relationship of these megacrysts to the host rock. Major and trace element compositions of the Mg-rich core in olivine are in equilibrium with the bulk rock, within uncertainty, and rare earth element abundances of melt inclusions in Mg-rich olivines reported in the literature are similar to those of the bulk rock. Moreover, the P Kα intensity maps of two large olivine grains show no resorption between the uniform core and the rim. Taken together, these lines of evidence suggest the olivine megacrysts are phenocrysts. Among depleted olivine-phyric shergottites, Tissint is the first one that acts mostly as a closed system with olivine megacrysts being the phenocrysts. The texture and mineral chemistry of Tissint indicate a crystallization sequence of: olivine (Mg# 80 ± 1) → olivine (Mg# 76) + chromite → olivine (Mg# 74) + Ti-chromite → olivine (Mg# 74-63) + pyroxene (Mg# 76-65) + Cr-ulvöspinel → olivine (Mg# 63-35) + pyroxene (Mg# 65-60) + plagioclase, followed by late-stage ilmenite and phosphate. The crystallization of the Tissint meteorite likely occurred in two stages: uniform olivine cores likely crystallized under equilibrium conditions; and a fractional crystallization sequence that formed the rest of the rock. The two-stage crystallization without crystal settling is simulated using MELTS and the Tissint bulk composition, and can broadly reproduce the crystallization sequence and mineral chemistry measured in the Tissint samples. The transition between equilibrium and fractional crystallization is associated with a dramatic increase in cooling rate and might have been driven by an acceleration in the ascent rate or by encounter with a steep thermal gradient in the Martian crust.

  9. Focused ultrasound simultaneous irradiation/MRI imaging, and two-stage general kinetic model.

    Directory of Open Access Journals (Sweden)

    Sheng-Yao Huang

    Full Text Available Many studies have investigated how to use focused ultrasound (FUS to temporarily disrupt the blood-brain barrier (BBB in order to facilitate the delivery of medication into lesion sites in the brain. In this study, through the setup of a real-time system, FUS irradiation and injections of ultrasound contrast agent (UCA and Gadodiamide (Gd, an MRI contrast agent can be conducted simultaneously during MRI scanning. By using this real-time system, we were able to investigate in detail how the general kinetic model (GKM is used to estimate Gd penetration in the FUS irradiated area in a rat's brain resulting from UCA concentration changes after single FUS irradiation. Two-stage GKM was proposed to estimate the Gd penetration in the FUS irradiated area in a rat's brain under experimental conditions with repeated FUS irradiation combined with different UCA concentrations. The results showed that the focal increase in the transfer rate constant of Ktrans caused by BBB disruption was dependent on the doses of UCA. Moreover, the amount of in vivo penetration of Evans blue in the FUS irradiated area in a rat's brain under various FUS irradiation experimental conditions was assessed to show the positive correlation with the transfer rate constants. Compared to the GKM method, the Two-stage GKM is more suitable for estimating the transfer rate constants of the brain treated with repeated FUS irradiations. This study demonstrated that the entire process of BBB disrupted by FUS could be quantitatively monitored by real-time dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI.

  10. Condition monitoring of distributed systems using two-stage Bayesian inference data fusion

    Science.gov (United States)

    Jaramillo, Víctor H.; Ottewill, James R.; Dudek, Rafał; Lepiarczyk, Dariusz; Pawlik, Paweł

    2017-03-01

    In industrial practice, condition monitoring is typically applied to critical machinery. A particular piece of machinery may have its own condition monitoring system that allows the health condition of said piece of equipment to be assessed independently of any connected assets. However, industrial machines are typically complex sets of components that continuously interact with one another. In some cases, dynamics resulting from the inception and development of a fault can propagate between individual components. For example, a fault in one component may lead to an increased vibration level in both the faulty component, as well as in connected healthy components. In such cases, a condition monitoring system focusing on a specific element in a connected set of components may either incorrectly indicate a fault, or conversely, a fault might be missed or masked due to the interaction of a piece of equipment with neighboring machines. In such cases, a more holistic condition monitoring approach that can not only account for such interactions, but utilize them to provide a more complete and definitive diagnostic picture of the health of the machinery is highly desirable. In this paper, a Two-Stage Bayesian Inference approach allowing data from separate condition monitoring systems to be combined is presented. Data from distributed condition monitoring systems are combined in two stages, the first data fusion occurring at a local, or component, level, and the second fusion combining data at a global level. Data obtained from an experimental rig consisting of an electric motor, two gearboxes, and a load, operating under a range of different fault conditions is used to illustrate the efficacy of the method at pinpointing the root cause of a problem. The obtained results suggest that the approach is adept at refining the diagnostic information obtained from each of the different machine components monitored, therefore improving the reliability of the health assessment of

  11. Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys

    Science.gov (United States)

    Murray, R.; Rastegar, J.

    2009-03-01

    Harvesting mechanical energy from ocean wave oscillations for conversion to electrical energy has long been pursued as an alternative or self-contained power source. The attraction to harvesting energy from ocean waves stems from the sheer power of the wave motion, which can easily exceed 50 kW per meter of wave front. The principal barrier to harvesting this power is the very low and varying frequency of ocean waves, which generally vary from 0.1Hz to 0.5Hz. In this paper the application of a novel class of two-stage electrical energy generators to buoyant structures is presented. The generators use the buoy's interaction with the ocean waves as a low-speed input to a primary system, which, in turn, successively excites an array of vibratory elements (secondary system) into resonance - like a musician strumming a guitar. The key advantage of the present system is that by having two decoupled systems, the low frequency and highly varying buoy motion is converted into constant and much higher frequency mechanical vibrations. Electrical energy may then be harvested from the vibrating elements of the secondary system with high efficiency using piezoelectric elements. The operating principles of the novel two-stage technique are presented, including analytical formulations describing the transfer of energy between the two systems. Also, prototypical design examples are offered, as well as an in-depth computer simulation of a prototypical heaving-based wave energy harvester which generates electrical energy from the up-and-down motion of a buoy riding on the ocean's surface.

  12. Anti-kindling induced by two-stage coordinated reset stimulation with weak onset intensity

    Directory of Open Access Journals (Sweden)

    Magteld eZeitler

    2016-05-01

    Full Text Available Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e. unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies.

  13. Two-Stage Latissimus Dorsi Flap with Implant for Unilateral Breast Reconstruction: Getting the Size Right

    Directory of Open Access Journals (Sweden)

    Jiajun Feng

    2016-03-01

    Full Text Available BackgroundThe aim of unilateral breast reconstruction after mastectomy is to craft a natural-looking breast with symmetry. The latissimus dorsi (LD flap with implant is an established technique for this purpose. However, it is challenging to obtain adequate volume and satisfactory aesthetic results using a one-stage operation when considering factors such as muscle atrophy, wound dehiscence and excessive scarring. The two-stage reconstruction addresses these difficulties by using a tissue expander to gradually enlarge the skin pocket which eventually holds an appropriately sized implant.MethodsWe analyzed nine patients who underwent unilateral two-stage LD reconstruction. In the first stage, an expander was placed along with the LD flap to reconstruct the mastectomy defect, followed by gradual tissue expansion to achieve overexpansion of the skin pocket. The final implant volume was determined by measuring the residual expander volume after aspirating the excess saline. Finally, the expander was replaced with the chosen implant.ResultsThe average volume of tissue expansion was 460 mL. The resultant expansion allowed an implant ranging in volume from 255 to 420 mL to be placed alongside the LD muscle. Seven patients scored less than six on the relative breast retraction assessment formula for breast symmetry, indicating excellent breast symmetry. The remaining two patients scored between six and eight, indicating good symmetry.ConclusionsThis approach allows the size of the eventual implant to be estimated after the skin pocket has healed completely and the LD muscle has undergone natural atrophy. Optimal reconstruction results were achieved using this approach.

  14. Ebola Blood Test May Help Predict Survival Chances

    Science.gov (United States)

    ... page: https://medlineplus.gov/news/fullstory_163165.html Ebola Blood Test May Help Predict Survival Chances Findings ... help determine a person's chance of surviving an Ebola infection, researchers say. "It is not just defining ...

  15. Convexity-preserving Bernstein–Bézier quartic scheme

    Directory of Open Access Journals (Sweden)

    Maria Hussain

    2014-07-01

    Full Text Available A C1 convex surface data interpolation scheme is presented to preserve the shape of scattered data arranged over a triangular grid. Bernstein–Bézier quartic function is used for interpolation. Lower bound of the boundary and inner Bézier ordinates is determined to guarantee convexity of surface. The developed scheme is flexible and involves more relaxed constraints.

  16. Finding sets of points without empty convex 6-gons

    NARCIS (Netherlands)

    Overmars, M.H.

    2001-01-01

    Erdös asked whether every large enough set of points in general position in the plane contains six points that form a convex 6-gon without any points from the set in its interior. In this note we show how a set of 29 points was found that contains no empty convex 6-gon. To this end a fast

  17. Convex bodies in Euclidean and Weil-Petersson geometries

    CERN Document Server

    Yamada, Sumio

    2011-01-01

    On a convex body in a Euclidean space, we introduce a new variational formulation for its Funk metric, a Finsler metric compatible with the tautological Finsler structure of the convex body. We generalize the metric on Teichmuller spaces with the Weil-Petersson distance function. A set of similarities the resulting metric structure shares with Thurston's asymmetric metric is noted.

  18. Convergence of Algorithms for Reconstructing Convex Bodies and Directional Measures

    DEFF Research Database (Denmark)

    Gardner, Richard; Kiderlen, Markus; Milanfar, Peyman

    2006-01-01

    We investigate algorithms for reconstructing a convex body K in Rn from noisy measurements of its support function or its brightness function in k directions u1, . . . , uk. The key idea of these algorithms is to construct a convex polytope Pk whose support function (or brightness function) best ...

  19. In-vivo Convex Array Vector Flow Imaging

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt; Brandt, Andreas Hjelm; Nielsen, Michael Bachmann

    2014-01-01

    In-vivo VFI scans obtained from the abdomen of a human volunteer using a convex array transducers and trans- verse oscillation vector flow imaging (VFI) are presented. A 3 MHz BK Medical 8820e (Herlev, Denmark) 192-element convex array probe is used with the SARUS experimental ultrasound scanner....

  20. Locally uniformly convex norms in Banach spaces and their duals

    OpenAIRE

    Haydon, Richard

    2006-01-01

    It is shown that a Banach space with locally uniformly convex dual admits an equivalent norm which is itself locally uniformly convex. It follows that on any such space all continuous real-valued functions may be uniformly approximated by C^1 functions.

  1. On a-order-convexity of Fuzzy Syntopogenous Spaces

    Institute of Scientific and Technical Information of China (English)

    WANG Hong

    2007-01-01

    In this paper,we combine L-fuzzy syntopogenous structure on X with algebraic structure on X.First,the *-increasing and *-decreasing spaces have been studied.Second,we define a-order-convexity on syntopogenous structures (X,S,≤).some important properties of a-order-convexity have been obtained.

  2. Transverse-Mode Control of VCSELs With Convex Mirror

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    We propose the transverse-mode control of vertical-cavity surface-emitting lasers (VCSELs) with a convex mirror. A possibility of improvements on single-mode output power and higher-order mode suppression is presented by optimizing a convex mirror.

  3. Infinitesimal nonrigidity of convex surfaces with planar boundary

    Institute of Scientific and Technical Information of China (English)

    LI Chunhe; HONG Jiaxing

    2005-01-01

    In the present paper infinitesimal nonrigidity of a class of convex surfaces with planar boundary is given. This result shows that if the image of the Gauss map of an evolution convex surface with planar boundary covers some hemisphere, this surface may be of infinitesimal nonrigidity for the isometric deformation of planar boundary.

  4. Homotopy Method for Non-convex Programming in Unbonded Set

    Institute of Scientific and Technical Information of China (English)

    徐庆; 于波

    2005-01-01

    In the past few years, much and much attention has been paid to the method for solving non-convex programming. Many convergence results are obtained for bounded sets. In this paper, we get global convergence results for non-convex programming in unbounded sets under suitable conditions.

  5. (Average-) convexity of common pool and oligopoly TU-games

    NARCIS (Netherlands)

    Driessen, T.S.H.; Meinhardt, H.

    2000-01-01

    The paper studies both the convexity and average-convexity properties for a particular class of cooperative TU-games called common pool games. The common pool situation involves a cost function as well as a (weakly decreasing) average joint production function. Firstly, it is shown that, if the rele

  6. Simple sufficient conditions for starlikeness and convexity for meromorphic functions

    Directory of Open Access Journals (Sweden)

    Goswami Pranay

    2016-01-01

    Full Text Available In this paper we investigate some extensions of sufficient conditions for meromorphic multivalent functions in the open unit disk to be meromorphic multivalent starlike and convex of order α. Our results unify and extend some starlikeness and convexity conditions for meromorphic multivalent functions obtained by Xu et al. [2], and some interesting special cases are given.

  7. The inverse moment problem for convex polytopes

    CERN Document Server

    Gravin, Nick; Pasechnik, Dmitrii; Robins, Sinai

    2011-01-01

    The goal of this paper is to present a general and novel approach for the reconstruction of any convex d-dimensional polytope P, from knowledge of its moments. In particular, we show that the vertices of an N-vertex polytope in R^d can be reconstructed from the knowledge of O(DN) axial moments (w.r.t. to an unknown polynomial measure od degree D) in d+1 distinct generic directions. Our approach is based on the collection of moment formulas due to Brion, Lawrence, Khovanskii-Pukhikov, and Barvinok that arise in the discrete geometry of polytopes, and what variously known as Prony's method, or Vandermonde factorization of finite rank Hankel matrices.

  8. Convex functions, monotone operators and differentiability

    CERN Document Server

    Phelps, Robert R

    1989-01-01

    These notes start with an introduction to the differentiability of convex functions on Banach spaces, leading to the study of Asplund spaces and their intriguing relationship to monotone operators (and more general set-values maps) and Banach spaces with the Radon-Nikodym property. While much of this is classical, some of it is presented using streamlined proofs which were not available until recently. Considerable attention is paid to contemporary results on variational principles and perturbed optimization in Banach spaces, exhibiting their close connections with Asplund spaces. An introductory course in functional analysis is adequate background for reading these notes which can serve as the basis for a seminar of a one-term graduate course. There are numerous excercises, many of which form an integral part of the exposition.

  9. non-Lipschitzian mappings without convexity

    Directory of Open Access Journals (Sweden)

    G. Li

    1999-01-01

    real Hilbert space H, and ℑ={Tt:t∈G} a representation of G as asymptotically nonexpansive type mappings of C into itself. Let L(x={z∈H:infs∈Gsupt∈G‖Tts x−z‖=inft∈G‖Tt x−z‖} for each x∈C and L(ℑ=∩x∈C L(x. In this paper, we prove that ∩s∈Gconv¯{Tts x:t∈G}∩L(ℑ is nonempty for each x∈C if and only if there exists a unique nonexpansive retraction P of C into L(ℑ such that PTs=P for all s∈G and P(x∈conv¯{Ts x:s∈G} for every x∈C. Moreover, we prove the ergodic convergence theorem for a semitopological semigroup of non-Lipschitzian mappings without convexity.

  10. DIFFERENTIAL SUBORDINATIONS AND α-CONVEX FUNCTIONS

    Institute of Scientific and Technical Information of China (English)

    Jacek DZIOK; Ravinder Krishna RAINA; Janusz SOK(O)L

    2013-01-01

    This article presents some new results on the class SLMα of functions that are analytic in the open unit discu ={z:[z[< 1} satisfying the conditions that f(0)=0,f'(0)=1,and α (1+ zf"(z)/f'(z)) + (1-α)zf'(z)/f(x) ∈(p)(u)for all z ∈ u,where α is a real number and (p)(z) =1 + τ2z2/ 1-τz-τ2z2 (z ∈ u).The number τ =(1-√5)/2 is such that τ2 =1 + T.The class SLMα introduced by J.Dziok,R.K.Raina,and J.Sokól [3,Appl.Math.Comput.218 (2011),996-1002] is closely related to the classes of starlike and convex functions.The article deals with several ideas and techniques used in geometric function theory and differential subordinations theory.

  11. Quantification of small, convex particles by TEM

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, Sigmund J. [SINTEF Materials and Chemistry, Department of Synthesis and Properties, Material Physics, NO-7465 Trondheim (Norway)], E-mail: sigmund.j.andersen@sintef.no; Holme, Borge [SINTEF Materials and Chemistry, P.O. Box 124, Blindern, NO-0314 Oslo (Norway); Marioara, Calin D. [SINTEF Materials and Chemistry, Department of Synthesis and Properties, Material Physics, NO-7465 Trondheim (Norway)

    2008-07-15

    It is shown how size distributions of arbitrarily oriented, convex, non-overlapping particles extracted from conventional transmission electron microscopy (TEM) images may be determined by a variation of the Schwartz-Saltykov method. In TEM, particles cut at the surfaces have diminished projections, which alter the observed size distribution. We represent this distribution as a vector and multiply it with the inverse of a matrix comprising thickness-dependent Scheil or Schwartz-Saltykov terms. The result is a corrected size distribution of the projections of uncut particles. It is shown how the real (3D) distribution may be estimated when particle shape is considered. Computer code to generate the matrix is given. A log-normal distribution of spheres and a real distribution of pill-box-shaped dispersoids in an Al-Mg-Si alloy are given as examples. The errors are discussed in detail.

  12. Weighted composition operators and locally convex algebras

    Institute of Scientific and Technical Information of China (English)

    Edoardo Vesentini

    2005-01-01

    The Gleason-Kahane-Zelazko theorem characterizes the continuous homomorphism of an associative, locally multiplicatively convex, sequentially complete algebra A into the field C among all linear forms on A. This characterization will be applied along two different directions. In the case in which A is a commutative Banach algebra, the theorem yields the representation of some classes of continuous linear maps A: A → A as weighted composition operators, or as composition operators when A is a continuous algebra endomorphism. The theorem will then be applied to explore the behaviour of continuous linear forms on quasi-regular elements, when A is either the algebra of all Hilbert-Schmidt operators or a Hilbert algebra.

  13. The problem of convexity of Chebyshev sets

    Science.gov (United States)

    Balaganskii, V. S.; Vlasov, L. P.

    1996-12-01

    Contents Introduction §1. Definitions and notation §2. Reference theorems §3. Some results Chapter I. Characterization of Banach spaces by means of the relations between approximation properties of sets §1. Existence, uniqueness §2. Prom approximate compactness to 'sun'-property §3. From 'sun'-property to approximate compactness §4. Differentiability in the direction of the gradient is sufficient for Fréchet and Gâteaux differentiability §5. Sets with convex complement Chapter II. The structure of Chebyshev and related sets §1. The isolated point method §2. Restrictions of the type \\vert\\overline{W}\\vert Klee (discrete Chebyshev set) §4. A survey of some other results Conclusion Bibliography

  14. Convex Decomposition Based Cluster Labeling Method for Support Vector Clustering

    Institute of Scientific and Technical Information of China (English)

    Yuan Ping; Ying-Jie Tian; Ya-Jian Zhou; Yi-Xian Yang

    2012-01-01

    Support vector clustering (SVC) is an important boundary-based clustering algorithm in multiple applications for its capability of handling arbitrary cluster shapes. However,SVC's popularity is degraded by its highly intensive time complexity and poor label performance.To overcome such problems,we present a novel efficient and robust convex decomposition based cluster labeling (CDCL) method based on the topological property of dataset.The CDCL decomposes the implicit cluster into convex hulls and each one is comprised by a subset of support vectors (SVs).According to a robust algorithm applied in the nearest neighboring convex hulls,the adjacency matrix of convex hulls is built up for finding the connected components; and the remaining data points would be assigned the label of the nearest convex hull appropriately.The approach's validation is guaranteed by geometric proofs.Time complexity analysis and comparative experiments suggest that CDCL improves both the efficiency and clustering quality significantly.

  15. ANALYSIS TO NEYMAN-PEARSON CLASSIFICATION WITH CONVEX LOSS FUNCTION

    Institute of Scientific and Technical Information of China (English)

    Min Han; Dirong Chen; Zhaoxu Sun

    2008-01-01

    Neyman-Pearson classification has been studied in several articles before.But they all proceeded in the classes of indicator functions with indicator function as the loss function,which make the calculation to be difficult.This paper investigates NeymanPearson classification with convex loss function in the arbitrary class of real measurable functions.A general condition is given under which Neyman-Pearson classification with convex loss function has the same classifier as that with indicator loss function.We give analysis to NP-ERM with convex loss function and prove it's performance guarantees.An example of complexity penalty pair about convex loss function risk in terms of Rademacher averages is studied,which produces a tight PAC bound of the NP-ERM with convex loss function.

  16. Introducing convex layers to the Traveling Salesman Problem

    CERN Document Server

    Liew, Sing

    2012-01-01

    In this paper, we will propose convex layers to the Traveling Salesman Problem (TSP). Firstly, we will focus on human performance on the TSP. Experimental data shows that untrained humans appear to have the ability to perform well in the TSP. On the other hand, experimental data also supports the hypothesis of convex hull i.e. human relies on convex hull to search for the optimal tour for the TSP. Secondly, from the paper published by Bonabeau, Dorigo and Theraulaz, social insect behavior would be able to help in some of the optimizing problems, especially the TSP. Thus, we propose convex layers to the TSP based on the argument that, by the analogy to the social insect behavior, untrained humans' cognition should be able to help in the TSP. Lastly, we will use Tour Improvement algorithms on convex layers to search for an optimal tour for a 13-cities problem to demonstrate the idea.

  17. Efficient protocols for point-convex hull inclusion decision problems

    Directory of Open Access Journals (Sweden)

    Yun Ye

    2010-05-01

    Full Text Available Secure Multi-party Computation (SMC is dedicated to solve trust problems in cooperative computing with each participant’s private data. Privacy Preserving Computational Geometry (PPCG is a special area in SMC and being widely researched. In the real world, PPCG theories can be found being used in various occasions such as military cooperation, commercial competitions and so on. Point-convex hull inclusion problem is a practical case in PPCG and has its profound values. This paper firstly investigates the point inclusion problem with static convex hull, and then marches on to the cases of active convex hull, including the parallel moving and rotating ones. To solve the problems above, we propose a secure protocol to determine the relative position of a private point and a private convex hull in the first place. Compared with previous solutions, our protocols perform better in efficiency, especially when the number of the convex hull’s point is large.

  18. Misunderstanding that the Effective Action is Convex under Broken Symmetry

    CERN Document Server

    Asanuma, Nobu-Hiko

    2016-01-01

    The widespread belief that the effective action is convex and has a flat bottom under broken global symmetry is shown to be wrong. We show spontaneous symmetry breaking necessarily accompanies non-convexity in the effective action for quantum field theory, or in the free energy for statistical mechanics, and clarify the magnitude of non-convexity. For quantum field theory, it is also explicitly proved that translational invariance breaks spontaneously when the system is in the non-convex region, and that different vacua of spontaneously broken symmetry cannot be superposed. As applications of non-convexity, we study the first-order phase transition which happens at the zero field limit of spontaneously broken symmetry, and we propose a simple model of phase coexistence which obeys the Born rule.

  19. CPU timing routines for a CONVEX C220 computer system

    Science.gov (United States)

    Bynum, Mary Ann

    1989-01-01

    The timing routines available on the CONVEX C220 computer system in the Structural Mechanics Division (SMD) at NASA Langley Research Center are examined. The function of the timing routines, the use of the timing routines in sequential, parallel, and vector code, and the interpretation of the results from the timing routines with respect to the CONVEX model of computing are described. The timing routines available on the SMD CONVEX fall into two groups. The first group includes standard timing routines generally available with UNIX 4.3 BSD operating systems, while the second group includes routines unique to the SMD CONVEX. The standard timing routines described in this report are /bin/csh time,/bin/time, etime, and ctime. The routines unique to the SMD CONVEX are getinfo, second, cputime, toc, and a parallel profiling package made up of palprof, palinit, and palsum.

  20. Fundamentals of convex analysis duality, separation, representation, and resolution

    CERN Document Server

    Panik, Michael J

    1993-01-01

    Fundamentals of Convex Analysis offers an in-depth look at some of the fundamental themes covered within an area of mathematical analysis called convex analysis. In particular, it explores the topics of duality, separation, representation, and resolution. The work is intended for students of economics, management science, engineering, and mathematics who need exposure to the mathematical foundations of matrix games, optimization, and general equilibrium analysis. It is written at the advanced undergraduate to beginning graduate level and the only formal preparation required is some familiarity with set operations and with linear algebra and matrix theory. Fundamentals of Convex Analysis is self-contained in that a brief review of the essentials of these tool areas is provided in Chapter 1. Chapter exercises are also provided. Topics covered include: convex sets and their properties; separation and support theorems; theorems of the alternative; convex cones; dual homogeneous systems; basic solutions and comple...