WorldWideScience

Sample records for two-part series designed

  1. Time series analysis based on two-part models for excessive zero count data to detect farm-level outbreaks of swine echinococcosis during meat inspections.

    Science.gov (United States)

    Adachi, Yasumoto; Makita, Kohei

    2017-12-01

    Echinococcus multilocularis is a parasite that causes highly pathogenic zoonoses and is maintained in foxes and rodents on Hokkaido Island, Japan. Detection of E. multilocularis infections in swine is epidemiologically important. In Hokkaido, administrative information is provided to swine producers based on the results of meat inspections. However, as the current criteria for providing administrative information often results in delays in providing information to producers, novel criteria are needed. Time series models were developed to monitor autocorrelations between data and lags using data collected from 84 producers at the Higashi-Mokoto Meat Inspection Center between April 2003 and November 2015. The two criteria were quantitatively compared using the sign test for the ability to rapidly detect farm-level outbreaks. Overall, the time series models based on an autoexponentially regressed zero-inflated negative binomial distribution with 60th percentile cumulative distribution function of the model detected outbreaks earlier more frequently than the current criteria (90.5%, 276/305, ppart model with autoexponential regression can adequately deal with data involving an excessive number of zeros and that the novel criteria overcome disadvantages of the current criteria to provide an earlier indication of increases in the rate of echinococcosis. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Use of two-part regression calibration model to correct for measurement error in episodically consumed foods in a single-replicate study design: EPIC case study.

    Science.gov (United States)

    Agogo, George O; van der Voet, Hilko; van't Veer, Pieter; Ferrari, Pietro; Leenders, Max; Muller, David C; Sánchez-Cantalejo, Emilio; Bamia, Christina; Braaten, Tonje; Knüppel, Sven; Johansson, Ingegerd; van Eeuwijk, Fred A; Boshuizen, Hendriek

    2014-01-01

    In epidemiologic studies, measurement error in dietary variables often attenuates association between dietary intake and disease occurrence. To adjust for the attenuation caused by error in dietary intake, regression calibration is commonly used. To apply regression calibration, unbiased reference measurements are required. Short-term reference measurements for foods that are not consumed daily contain excess zeroes that pose challenges in the calibration model. We adapted two-part regression calibration model, initially developed for multiple replicates of reference measurements per individual to a single-replicate setting. We showed how to handle excess zero reference measurements by two-step modeling approach, how to explore heteroscedasticity in the consumed amount with variance-mean graph, how to explore nonlinearity with the generalized additive modeling (GAM) and the empirical logit approaches, and how to select covariates in the calibration model. The performance of two-part calibration model was compared with the one-part counterpart. We used vegetable intake and mortality data from European Prospective Investigation on Cancer and Nutrition (EPIC) study. In the EPIC, reference measurements were taken with 24-hour recalls. For each of the three vegetable subgroups assessed separately, correcting for error with an appropriately specified two-part calibration model resulted in about three fold increase in the strength of association with all-cause mortality, as measured by the log hazard ratio. Further found is that the standard way of including covariates in the calibration model can lead to over fitting the two-part calibration model. Moreover, the extent of adjusting for error is influenced by the number and forms of covariates in the calibration model. For episodically consumed foods, we advise researchers to pay special attention to response distribution, nonlinearity, and covariate inclusion in specifying the calibration model.

  3. French N4 Series Design and Manufacturing

    International Nuclear Information System (INIS)

    Lebreton, Gerard

    1989-01-01

    The construction contract for the first two N4 units. on the Chooz site close to the French-Belgian border (Chooz B1 and B2). was awarded by Electricite de France (EDF) to Fumarate in May 1984. At present, project construction is approximately 50% complete for unit B1. The main civil works are practically finished and the reactor vessel and the steam generator were delivered on site by mid-1988. The connection to the grid by 1991 appears quite feasible. Continuation of the French nuclear power programme in the 1990s, specifically on the CIVEX and Penly sites, is based on this model. The N4 thus follows the four-loop, 1,300 MW class series designated P.a. whose first unit is Cattenom 1, which will serve in the following as a reference to appreciate the design evolution of the N4 NSSS. The design evolutions selected to reach these objectives are in technical continuity with the previous series, integrate the vast experience gained within the French programme and abroad, and were supported by a large R and D programme and further by industrial qualification tests

  4. Learning and Celebrating: The Glamour of Design Lecture Series

    Science.gov (United States)

    Popov, Lubomir

    2013-01-01

    The purpose of this paper is to highlight the celebratory aspect of the Design Lecture Series, a tradition in architecture schools and interior design programs, its meaning for all constituent parties, and its contributions to creating professional identity and community. The Design Lecture Series is a public event popular in design programs,…

  5. Construct-a-Boat. Science by Design Series.

    Science.gov (United States)

    Baroway, William

    This book is one of four books in the Science-by-Design Series created by TERC and funded by the National Science Foundation (NSF). It challenges high school students to investigate the physics of boat performance and work with systems and modeling. Through research, design, testing, and evaluation of a model boat, students experience the…

  6. Design and Implementation of a Professional Development Course Series.

    Science.gov (United States)

    Welch, Beth; Spooner, Joshua J; Tanzer, Kim; Dintzner, Matthew R

    2017-12-01

    Objective. To design and implement a longitudinal course series focused on professional development and professional identity formation in pharmacy students at Western New England University. Methods. A four-year, theme-based course series was designed to sequentially and longitudinally impart the values, attributes, and characteristics of a professional pharmacist. Requirements of the course include: goal planning and reflective assignments, submission of "Best Works," attendance at professional meetings, completion of service hours, annual completion of a Pharmacy Professionalism Instrument, attendance at Dean's Seminar, participation in roundtable discussions, and maintenance of an electronic portfolio. Though the Professional Development course series carries no credit, these courses are progression requirements and students are assessed on a pass/fail basis. Results. Course pass rates in the 2015-2016 academic year for all four classes were 99% to 100%, suggesting the majority of students take professional development seriously and are achieving the intended outcomes of the courses. Conclusion. A professional development course series was designed and implemented in the new Doctor of Pharmacy program at Western New England University to enhance the professional identity formation of students.

  7. Design of the LRP airfoil series using 2D CFD

    DEFF Research Database (Denmark)

    Zahle, Frederik; Bak, Christian; Sørensen, Niels N.

    2014-01-01

    This paper describes the design and wind tunnel testing of a high-Reynolds number, high lift airfoil series designed for wind turbines. The airfoils were designed using direct gradient- based numerical multi-point optimization based on a Bezier parameterization of the shape, coupled to the 2D...... Navier-Stokes flow solver EllipSys2D. The resulting airfoils, the LRP2-30 and LRP2-36, achieve both higher operational lift coefficients and higher lift to drag ratios compared to the equivalent FFA-W3 airfoils....

  8. Design of the LRP airfoil series using 2D CFD

    International Nuclear Information System (INIS)

    Zahle, Frederik; Bak, Christian; Sørensen, Niels N; Vronsky, Tomas; Gaudern, Nicholas

    2014-01-01

    This paper describes the design and wind tunnel testing of a high-Reynolds number, high lift airfoil series designed for wind turbines. The airfoils were designed using direct gradient- based numerical multi-point optimization based on a Bezier parameterization of the shape, coupled to the 2D Navier-Stokes flow solver EllipSys2D. The resulting airfoils, the LRP2-30 and LRP2-36, achieve both higher operational lift coefficients and higher lift to drag ratios compared to the equivalent FFA-W3 airfoils

  9. Real Rainfall Time Series for Storm Sewer Design

    DEFF Research Database (Denmark)

    Larsen, Torben

    The paper describes a simulation method for the design of retention storages, overflows etc. in storm sewer systems. The method is based on computer simulation with real rainfall time series as input ans with the aply of a simple transfer model of the ARMA-type (autoregressiv moving average model......) as the model of the storm sewer system. The output of the simulation is the frequency distribution of the peak flow, overflow volume etc. from the overflow or retention storage. The parameters in the transfer model is found either from rainfall/runoff measurements in the catchment or from one or a few...

  10. Design of an eight-megawatt series regulator

    International Nuclear Information System (INIS)

    DeVore, K.R.

    1977-01-01

    An 8-MW, 100 percent duty cycle, hard tube series regulator used to control the accelerating voltage of a neutral beam source is described. The series tube is a developmental switch/regulator tube capable of holding off 200 kV passing 85 A, and dissipating 2 MW of anode power. The regulator has high-speed interrupt capability to minimize the power delivered to the load in the event of a load fault. Its design is such that it can be used to regulate both positive and negative accelerating voltages. All reference/control signals between the modulator and the control station use optical links to minimize noise interference and ground loop problems. In all cases of optical coupling, the loss of light is the worst-case condition, i.e., loss of light turns off the regulator. The fast interrupt is accomplished by rapid removal of the screen grid voltage from the series tube, and then driving the control grid into cutoff. After the control grid is in cutoff the screen is allowed to recover, and the regulator is then ready to switch back on. The regulator tube driver is a straightforward dc-coupled amplifier with a cathode follower output; dc isolation between various sections of the modulator is accomplished by using optical coupling. The use of optics allows the use of solid-state devices in an extremely hostile environment containing both electromagnetic and nuclear radiation

  11. Graphical Data Analysis on the Circle: Wrap-Around Time Series Plots for (Interrupted) Time Series Designs.

    Science.gov (United States)

    Rodgers, Joseph Lee; Beasley, William Howard; Schuelke, Matthew

    2014-01-01

    Many data structures, particularly time series data, are naturally seasonal, cyclical, or otherwise circular. Past graphical methods for time series have focused on linear plots. In this article, we move graphical analysis onto the circle. We focus on 2 particular methods, one old and one new. Rose diagrams are circular histograms and can be produced in several different forms using the RRose software system. In addition, we propose, develop, illustrate, and provide software support for a new circular graphical method, called Wrap-Around Time Series Plots (WATS Plots), which is a graphical method useful to support time series analyses in general but in particular in relation to interrupted time series designs. We illustrate the use of WATS Plots with an interrupted time series design evaluating the effect of the Oklahoma City bombing on birthrates in Oklahoma County during the 10 years surrounding the bombing of the Murrah Building in Oklahoma City. We compare WATS Plots with linear time series representations and overlay them with smoothing and error bands. Each method is shown to have advantages in relation to the other; in our example, the WATS Plots more clearly show the existence and effect size of the fertility differential.

  12. Automated Feature Design for Time Series Classification by Genetic Programming

    OpenAIRE

    Harvey, Dustin Yewell

    2014-01-01

    Time series classification (TSC) methods discover and exploit patterns in time series and other one-dimensional signals. Although many accurate, robust classifiers exist for multivariate feature sets, general approaches are needed to extend machine learning techniques to make use of signal inputs. Numerous applications of TSC can be found in structural engineering, especially in the areas of structural health monitoring and non-destructive evaluation. Additionally, the fields of process contr...

  13. Design and Synthesis of a Series of Truncated Neplanocin Fleximers

    Directory of Open Access Journals (Sweden)

    Sarah C. Zimmermann

    2014-12-01

    Full Text Available In an effort to study the effects of flexibility on enzyme recognition and activity, we have developed several different series of flexible nucleoside analogues in which the purine base is split into its respective imidazole and pyrimidine components. The focus of this particular study was to synthesize the truncated neplanocin A fleximers to investigate their potential anti-protozoan activities by inhibition of S-adenosylhomocysteine hydrolase (SAHase. The three fleximers tested displayed poor anti-trypanocidal activities, with EC50 values around 200 μM. Further studies of the corresponding ribose fleximers, most closely related to the natural nucleoside substrates, revealed low affinity for the known T. brucei nucleoside transporters P1 and P2, which may be the reason for the lack of trypanocidal activity observed.

  14. Methodology Series Module 8: Designing Questionnaires and Clinical Record Forms.

    Science.gov (United States)

    Setia, Maninder Singh

    2017-01-01

    As researchers, we often collect data on a clinical record form or a questionnaire. It is an important part of study design. If the questionnaire is not well designed, the data collected will not be useful. In this section of the module, we have discussed some practical aspects of designing a questionnaire. It is useful to make a list of all the variables that will be assessed in the study before preparing the questionnaire. The researcher should review all the existing questionnaires. It may be efficient to use an existing standardized questionnaire or scale. Many of these scales are freely available and may be used with an appropriate reference. However, some may be under copyright protection and permissions may be required to use the same questionnaire. While designing their own questionnaire, researchers may use open- or close-ended questions. It is important to design the responses appropriately as the format of responses will influence the analysis. Sometimes, one can collect the same information in multiple ways - continuous or categorical response. Besides these, the researcher can also use visual analog scales or Likert's scale in the questionnaire. Some practical take-home points are: (1) Use specific language while framing the questions; (2) write detailed instructions in the questionnaire; (3) use mutually exclusive response categories; (4) use skip patterns; (5) avoid double-barreled questions; and (6) anchor the time period if required.

  15. Design strategy for the combined system of shunt passive and series active filters

    OpenAIRE

    Fujita, Hideki; Akagi, Hirofumi

    1991-01-01

    A design strategy for the combined power filter for a three-phase twelve-pulse thyristor rectifier is proposed. The shunt passive filter, which can minimize the output voltage of the series active filter, is designed and tested in a prototype model. A specially designed shunt passive filter makes it possible to reduce the required rating of the series active filter to 60% compared with a conventional shunt passive filter

  16. Production design and location in the Danish television drama series Arvingerne

    DEFF Research Database (Denmark)

    Ion Wille, Jakob; Waade, Anne Marit

    2016-01-01

    Television fiction is most often referred to as the writer’s medium, whereas feature film is generally perceived as the vision and work of the director. In this article we turn our focus to the role and function of the production design and locations in developing and conceptualising a television...... drama series. We use the drama series Arvingerne (The Legacy, DR, 2014-2015) to illustrate how design ideas can be developed at an early stage, in pre-pre-production, as part of a collective, creative process that includes the scriptwriter, the production designer and the producer. Our empirical study...... of the series draws on an analysis of in-house design/concept documents [1], interviews with the production designer Mia Stensgaard [2], and promotional material made for the series [3]. The paper also draws on visual analysis of the finished production. Our overall argument is that the importance of location...

  17. Design of novel antitumor DNA alkylating agents: the benzacronycine series.

    Science.gov (United States)

    David-Cordonnier, Marie-Hélène; Laine, William; Gaslonde, Thomas; Michel, Sylvie; Tillequin, Francois; Koch, Michel; Léonce, Stéphane; Pierré, Alain; Bailly, Christian

    2004-03-01

    Acronycine, a natural alkaloid originally extracted from the bark of the Australian ash scrub Acronychia baueri, has shown a significant antitumor activity in animal models. Acronycine has been tested against human cancers in the early 1980s, but the clinical trials showed modest therapeutic effects and its development was rapidly discontinued. In order to optimize the antineoplastic effect, different benzoacronycine derivatives were synthesized. Among those, the di-acetate compound S23906-1 was recently identified as a promising anticancer drug candidate and a novel alkylating agent specifically reacting with the exocylic 2-NH2 group of guanines in DNA. The study of DNA bonding capacity of acronycine derivatives leads to the identification of the structural requirements for DNA alkylation. In nearly all cases, the potent alkylating agents, such as S23906-1, were found to be much more cytotoxic than the unreactive analogs such as acronycine itself or diol derivatives. Alkylation of DNA by the monoacetate derivative S28687-1, which is a highly reactive hydrolysis metabolite of S23906-1, occurs with a marked preference for the N2 position of guanine. Other bionucleophiles can react with S23906-1. The benzacronycine derivatives, which efficiently alkylate DNA, also covalently bind to the tripeptide glutathione (GSH) but not to the oxidized product glutathione disulfide. Here we review the reactivity of S23906-1 and some derivatives toward DNA and GSH. The structure-activity relationships in the benzacronycine series validate the reaction mechanism implicating DNA as the main molecular target. S23906-1 stands as the most promising lead of a medicinal chemistry program aimed at discovering novel antitumor drugs based on the acronycine skeleton.

  18. Use of Time-Series, ARIMA Designs to Assess Program Efficacy.

    Science.gov (United States)

    Braden, Jeffery P.; And Others

    1990-01-01

    Illustrates use of time-series designs for determining efficacy of interventions with fictitious data describing drug-abuse prevention program. Discusses problems and procedures associated with time-series data analysis using Auto Regressive Integrated Moving Averages (ARIMA) models. Example illustrates application of ARIMA analysis for…

  19. A Cost-Effective Two-Part Experiment for Teaching Introductory Organic Chemistry Techniques

    Science.gov (United States)

    Sadek, Christopher M.; Brown, Brenna A.; Wan, Hayley

    2011-01-01

    This two-part laboratory experiment is designed to be a cost-effective method for teaching basic organic laboratory techniques (recrystallization, thin-layer chromatography, column chromatography, vacuum filtration, and melting point determination) to large classes of introductory organic chemistry students. Students are exposed to different…

  20. On the electrical two-part tariff—The Brazilian perspective

    International Nuclear Information System (INIS)

    Steele Santos, Paulo E.; Coradi Leme, Rafael; Galvão, Leandro

    2012-01-01

    This paper discusses, in terms of Brazil's situation, the use of a nonlinear pricing approach in the application of a two-part tariff to electricity distribution networks. The principles that uphold charging access and usage are to optimize energy systems that are based on a generation technology mix. Such a pricing approach is used in Brazil, where the generation mix is mainly hydro-generation. This study shows that, in a case like Brazil's, a two-part tariff may be used as a tool for network optimization. The paper presents a design for a two-part tariff for a distribution system with varying consumer behavior. To validate the discussion, we offer a numerical example. Finally, remarks are given concerning pricing access and usage for low voltage level consumers.

  1. Apparel Design and Production: A Suggested Program Guide. Fashion Industry Series No. 2.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The apparel design and production guide is the second of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. Designed to provide youths and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific categories of jobs,…

  2. A series of student design projects for improving and modernizing safety helmets

    NARCIS (Netherlands)

    Beurden, van K.M.M. (Karin); Boer, de J. (Johannes); Stilma, M. (Margot); Teeuw, W.B. (Wouter)

    2014-01-01

    The Saxion Research Centre for Design and Technology employs many students during research projects. This paper discusses a series of student design projects on safety helmets in the Safety@Work project. At construction sites workers are required to wear personal protective equipment during their

  3. Quasi-experimental study designs series-paper 7: assessing the assumptions.

    Science.gov (United States)

    Bärnighausen, Till; Oldenburg, Catherine; Tugwell, Peter; Bommer, Christian; Ebert, Cara; Barreto, Mauricio; Djimeu, Eric; Haber, Noah; Waddington, Hugh; Rockers, Peter; Sianesi, Barbara; Bor, Jacob; Fink, Günther; Valentine, Jeffrey; Tanner, Jeffrey; Stanley, Tom; Sierra, Eduardo; Tchetgen, Eric Tchetgen; Atun, Rifat; Vollmer, Sebastian

    2017-09-01

    Quasi-experimental designs are gaining popularity in epidemiology and health systems research-in particular for the evaluation of health care practice, programs, and policy-because they allow strong causal inferences without randomized controlled experiments. We describe the concepts underlying five important quasi-experimental designs: Instrumental Variables, Regression Discontinuity, Interrupted Time Series, Fixed Effects, and Difference-in-Differences designs. We illustrate each of the designs with an example from health research. We then describe the assumptions required for each of the designs to ensure valid causal inference and discuss the tests available to examine the assumptions. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Adding Design Elements to Improve Time Series Designs: No Child Left behind as an Example of Causal Pattern-Matching

    Science.gov (United States)

    Wong, Manyee; Cook, Thomas D.; Steiner, Peter M.

    2015-01-01

    Some form of a short interrupted time series (ITS) is often used to evaluate state and national programs. An ITS design with a single treatment group assumes that the pretest functional form can be validly estimated and extrapolated into the postintervention period where it provides a valid counterfactual. This assumption is problematic. Ambiguous…

  5. Permanent-magnet motor with two-part rotor for wide speed range

    International Nuclear Information System (INIS)

    Baines, G.D.; Chalmers, B.J.; Akmese, R.

    1998-01-01

    The paper describes a synchronous motor with a two-part rotor comprising a surface-magnet part and a reluctance part mounted adjacent to each other on the same axis. Machine parameters and physical design details are selected in order to obtain constant-power characteristics over a 3:1 speed range by field-weakening. Test results demonstrate the achievement of the desired characteristics, in good agreement with computed predictions. (orig.)

  6. Designing and Evaluating an Interprofessional Experiential Course Series Involving Medical and Pharmacy Students

    Science.gov (United States)

    Dueñas, Gladys G.; Zanoni, Aileen; Grover, Anisha B.

    2016-01-01

    Objective. To prepare first-year and second-year pharmacy and medical students to build effective collaborative health care teams by participating in an interprofessional experiential 6-semester course series. Design. An interprofessional experiential course series was designed using a variety of teaching methods to achieve both interprofessional and experiential learning outcomes. A standardized objective behavioral assessment was developed to measure team performance of interprofessional communication and teamwork. In addition, student perceptions were measured using a validated instrument. Assessment. A majority of teams demonstrated appropriate competence with respect to interprofessional communication and teamwork. Additionally, a majority of students expressed positive perceptions of interprofessional collaboration with respect to teamwork, roles and responsibilities, and patient outcomes. Conclusion. An interprofessional experiential course series can be successfully implemented to achieve both interprofessional and experiential learning outcomes. Highly collaborative teams and positive student perceptions provide evidence of achievement of interprofessional education learning outcomes. PMID:27402988

  7. Antireflection coating design for series interconnected multi-junction solar cells

    International Nuclear Information System (INIS)

    Aiken, Daniel J.

    1999-01-01

    AR coating design for multi-junction solar cells can be more challenging than in the single junction case. Reasons for this are discussed. Analytical expressions used to optimize AR coatings for single junction solar cells are extended for use in monolithic, series interconnected multi-junction solar cell AR coating design. The result is an analytical expression which relates the solar cell performance (through J(sub SC)) directly to the AR coating design through the device reflectance. It is also illustrated how AR coating design can be used to provide an additional degree of freedom for current matching multi-junction devices

  8. A Unified Framework for Estimating Minimum Detectable Effects for Comparative Short Interrupted Time Series Designs

    Science.gov (United States)

    Price, Cristofer; Unlu, Fatih

    2014-01-01

    The Comparative Short Interrupted Time Series (C-SITS) design is a frequently employed quasi-experimental method, in which the pre- and post-intervention changes observed in the outcome levels of a treatment group is compared with those of a comparison group where the difference between the former and the latter is attributed to the treatment. The…

  9. Textile Design: A Suggested Program Guide. Fashion Industry Series No. 3.

    Science.gov (United States)

    Fashion Inst. of Tech., New York, NY.

    The textile design guide is the third of a series of five interrelated program resource guides encompassing the various dimensions of the fashion industry. The job-preparatory guide is conceived to provide youth and adults with intensive preparation for initial entry employment and also with career advancement opportunities within specific…

  10. Research and design of hanger and support series of nuclear safety class process piping

    International Nuclear Information System (INIS)

    Mao Chengzhang; Shi Jiemin

    1995-12-01

    Hangers and supports of nuclear safety class piping are an important part of primary system piping in a nuclear power plant. They will directly affect the reliability of operation, the period at construction and the investment for a nuclear power plant. It is an absolutely necessary job for Pakistan Chashma Nuclear Power Plant Project to research and design a series of piping supports in accordance with ASME-III NF. It is also an important designing for developing nuclear power plant later in China. After working over two years, a series of piping supports of nuclear safety class which have 57 types and more than 2460 specifications have been designed. This series is perfect, and can satisfy the requirements of piping final designing for nuclear power plant. This series of hangers and supports is mainly used in the process piping of nuclear safety class 1,2,3. They can also be used in other piping of nuclear safety class and piping with aseismic requirement of non-nuclear safety class

  11. A 10kW series resonant converter design, transistor characterization, and base-drive optimization

    Science.gov (United States)

    Robson, R.; Hancock, D.

    1981-01-01

    Transistors are characterized for use as switches in resonant circuit applications. A base drive circuit to provide the optimal base drive to these transistors under resonant circuit conditions is developed and then used in the design, fabrication and testing of a breadboard, spaceborne type 10 kW series resonant converter.

  12. Rational designing of the internal water supply system in reconstructed residential buildings of mass standard series

    OpenAIRE

    Orlov Evgeny

    2018-01-01

    The issues of water supply system reconstruction in mass series buildings are reviewed with consideration of water- and resource saving. Principal points for location of plumbing cells in apartments, arrangement of water devices and wastewater receivers, selection of pipelines for reconstructed water line are described. Comparative analysis of design variants of inner water line before and following reconstruction are given. It was found that applying the developed system design approaches th...

  13. Using machine learning to identify structural breaks in single-group interrupted time series designs.

    Science.gov (United States)

    Linden, Ariel; Yarnold, Paul R

    2016-12-01

    Single-group interrupted time series analysis (ITSA) is a popular evaluation methodology in which a single unit of observation is being studied, the outcome variable is serially ordered as a time series and the intervention is expected to 'interrupt' the level and/or trend of the time series, subsequent to its introduction. Given that the internal validity of the design rests on the premise that the interruption in the time series is associated with the introduction of the treatment, treatment effects may seem less plausible if a parallel trend already exists in the time series prior to the actual intervention. Thus, sensitivity analyses should focus on detecting structural breaks in the time series before the intervention. In this paper, we introduce a machine-learning algorithm called optimal discriminant analysis (ODA) as an approach to determine if structural breaks can be identified in years prior to the initiation of the intervention, using data from California's 1988 voter-initiated Proposition 99 to reduce smoking rates. The ODA analysis indicates that numerous structural breaks occurred prior to the actual initiation of Proposition 99 in 1989, including perfect structural breaks in 1983 and 1985, thereby casting doubt on the validity of treatment effects estimated for the actual intervention when using a single-group ITSA design. Given the widespread use of ITSA for evaluating observational data and the increasing use of machine-learning techniques in traditional research, we recommend that structural break sensitivity analysis is routinely incorporated in all research using the single-group ITSA design. © 2016 John Wiley & Sons, Ltd.

  14. Interaction of impeller and guide vane in a series-designed axial-flow pump

    International Nuclear Information System (INIS)

    Kim, S; Choi, Y S; Lee, K Y; Kim, J H

    2012-01-01

    In this paper, the interaction of the impeller and guide vane in a series-designed axial-flow pump was examined through the implementation of a commercial CFD code. The impeller series design refers to the general design procedure of the base impeller shape which must satisfy the various flow rate and head requirements by changing the impeller setting angle and number of blades of the base impeller. An arc type meridional shape was used to keep the meridional shape of the hub and shroud with various impeller setting angles. The blade angle and the thickness distribution of the impeller were designed as an NACA airfoil type. In the design of the guide vane, it was necessary to consider the outlet flow condition of the impeller with the given setting angle. The meridional shape of the guide vane were designed taking into consideration the setting angle of the impeller, and the blade angle distribution of the guide vane was determined with a traditional design method using vane plane development. In order to achieve the optimum impeller design and guide vane, three-dimensional computational fluid dynamics and the DOE method were applied. The interaction between the impeller and guide vane with different combination set of impeller setting angles and number of impeller blades was addressed by analyzing the flow field of the computational results.

  15. Transformations and innovations of punk graphic design in Peter Punk series from Disney

    Directory of Open Access Journals (Sweden)

    Regina Rossetti

    2016-06-01

    Full Text Available The punk movement is an example of peripheral culture that currently influences the dominant culture. This article aims to point out what were the changes and the innovations that the punk graphic design had to struggle to adapt itself to the series Peter Punk, exhibited by Disney XD channel. Through literature review and analysis of images, it is possible to conclude that the show’s graphic design absorbed the punk style with other influences, but without the spontaneity of punk.

  16. Software Design Challenges in Time Series Prediction Systems Using Parallel Implementation of Artificial Neural Networks

    Directory of Open Access Journals (Sweden)

    Narayanan Manikandan

    2016-01-01

    Full Text Available Software development life cycle has been characterized by destructive disconnects between activities like planning, analysis, design, and programming. Particularly software developed with prediction based results is always a big challenge for designers. Time series data forecasting like currency exchange, stock prices, and weather report are some of the areas where an extensive research is going on for the last three decades. In the initial days, the problems with financial analysis and prediction were solved by statistical models and methods. For the last two decades, a large number of Artificial Neural Networks based learning models have been proposed to solve the problems of financial data and get accurate results in prediction of the future trends and prices. This paper addressed some architectural design related issues for performance improvement through vectorising the strengths of multivariate econometric time series models and Artificial Neural Networks. It provides an adaptive approach for predicting exchange rates and it can be called hybrid methodology for predicting exchange rates. This framework is tested for finding the accuracy and performance of parallel algorithms used.

  17. Optimum design of matrix fault current limiters using the series resistance connected with shunt coil

    Science.gov (United States)

    Chung, D. C.; Choi, H. S.; Lee, N. Y.; Nam, G. Y.; Cho, Y. S.; Sung, T. H.; Han, Y. H.; Kim, B. S.; Lim, S. H.

    2007-10-01

    In this paper we described the improved design for the matrix fault current limiters (MFCL). To do this, we used thin film-type superconducting elements. therefore it means that we can make the MFCL with minimized size and high switching speed because of the high current density and the high indexing value of superconducting thin film. Also we could minimize the bulky shunt coil using the connection of a series resistance with a shunt coil. Also we could effectively block up a leakage current in shunt coils under no-fault condition and simply control total impedances of a current-limiting part using this method. After we designed an appropriated 1 × 2 basic MFCL module with an applied voltage of 160 V, we enlarged it to a 2 × 2 MFCL module and a 3 × 2 MFCL module where applied voltages were 320 V and 480 V, respectively. Experimental results for our MFCL were reported in terms of various fault currents, variation of series resistance and so on. We think that these methods will be useful in the optimum design of an m × n MFCL.

  18. Optimum design of matrix fault current limiters using the series resistance connected with shunt coil

    International Nuclear Information System (INIS)

    Chung, D.C.; Choi, H.S.; Lee, N.Y.; Nam, G.Y.; Cho, Y.S.; Sung, T.H.; Han, Y.H.; Kim, B.S.; Lim, S.H.

    2007-01-01

    In this paper we described the improved design for the matrix fault current limiters (MFCL). To do this, we used thin film-type superconducting elements. therefore it means that we can make the MFCL with minimized size and high switching speed because of the high current density and the high indexing value of superconducting thin film. Also we could minimize the bulky shunt coil using the connection of a series resistance with a shunt coil. Also we could effectively block up a leakage current in shunt coils under no-fault condition and simply control total impedances of a current-limiting part using this method. After we designed an appropriated 1 x 2 basic MFCL module with an applied voltage of 160 V, we enlarged it to a 2 x 2 MFCL module and a 3 x 2 MFCL module where applied voltages were 320 V and 480 V, respectively. Experimental results for our MFCL were reported in terms of various fault currents, variation of series resistance and so on. We think that these methods will be useful in the optimum design of an m x n MFCL

  19. Design, synthesis and photovoltaic properties of a series of new acceptor-pended conjugated polymers

    Institute of Scientific and Technical Information of China (English)

    Zhihong; Wu; Yongxiang; Zhu; Wei; Li; Yunping; Huang; Junwu; Chen; Chunhui; Duan; Fei; Huang; Yong; Cao

    2016-01-01

    A series of novel acceptor-pended conjugated polymers featuring a newly developed carbazole-derived unit are designed and synthesized. The relationships between chemical structure and optoelectronic properties of the polymers are systematically investigated.The control of UV-Vis absorption spectra and energy levels in resulting polymers are achieved by introducing suitable pended acceptor units. The photovoltaic properties of the resulting polymers are evaluated by blending the polymers with(6,6)-phenyl-C71-butyric acid methyl ester. The resulting solar cells exhibit moderate performances with high open-circuit voltage. Charge transport properties and morphology were investigated to understand the performance of corresponding solar cells.

  20. Pediatric emotional dysregulation and behavioral disruptiveness treated with hypnosis: a time-series design.

    Science.gov (United States)

    Iglesias, Alex; Iglesias, Adam

    2014-01-01

    A case of pediatric oppositional defiant disorder (ODD) with concomitant emotional dysregulation and secondary behavioral disruptiveness was treated with hypnosis by means of the hypnotic hold, a method adapted by the authors. An A-B-A-B time-series design with multiple replications was employed to measure the relationship of the hypnotic treatment to the dependent measure: episodes of emotional dysregulation with accompanying behavioral disruptiveness. The findings indicated a statistically significant relationship between the degree of change from phase to phase and the treatment. Follow-up at 6 months indicated a significant reduction of the frequency of targeted episodes of emotional dysregulation and behavioral disruptiveness at home.

  1. Progress in design and development of series liquid lithium-lead expeirmental loops in China

    International Nuclear Information System (INIS)

    Wu Yican; Huang Qunying; Zhu Zhiqiang; Gao Sheng; Song Yong; Li Chunjing; Peng Lei; Liu Shaojun; Wu qingsheng; Liu Songlin; Chen Hongli; Bai Yunqing; Jin Ming; Lv Ruojun; Wang Weihua; Guo Zhihui; Chen Yaping; Ling Xinzhen; Zhang Maolian; Wang Yongliang; Wu Zhaoyang; Wang Hongyan

    2009-01-01

    Liquid LiPb (lithium-lead) experimental loops are the important platforms to investigate the key technologies of liquid LiPb breeder blankets for fusion reactors. Based on the development strategy for liquid LiPb breeder blankets, the technologies development of liquid LiPb experimental loops have been explored by the FDS Team for years, and a series of LiPb experimental loops named DRAGON have been designed and developed, which have independence intellectual property and multi-functional parameters. In this paper, the development route suggestion of Chinese LiPb experimental loops was elaborated, and some information for the senes experimental loops were introduced, such as the design principles, structural features, functions and related experimental researches, etc. (authors)

  2. Optimal design of multistage chemostats in series using different microbial growth kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Qasim, Muhammad [Petroleum Engineering Technology, Abu Dhabi Polytechnic (United Arab Emirates)

    2013-07-01

    In this paper, the optimum design of multistage chemostats (CSTRs) was investigated. The optimal design was based on the minimum overall reactor volume using different volume for each chemostat. The paper investigates three different microbial growth kinetics; Monod kinetics, Contois kinetics and the Logistic equation. The total dimensionless residence time (theta Total) was set as the optimization objective function that was minimized by varying the intermediate dimensionless substrate concentration (alfa i). The effect of inlet substrate concentration (S0) to the first reactor on the optimized total dimensionless residence time was investigated at a constant conversion of 0.90. In addition, the effect of conversion on the optimized total dimensionless residence time was also investigated at constant inlet substrate concentration (S0). For each case, optimization was done using up to five chemostats in series.

  3. Design strategy for improving the energy efficiency in series hydraulic/electric synergy system

    International Nuclear Information System (INIS)

    Ramakrishnan, R.; Hiremath, Somashekhar S.; Singaperumal, M.

    2014-01-01

    Battery is a vital subsystem in an electric vehicle with regenerative braking system. The energy efficiency of an electric vehicle is improved by storing the regenerated energy in an electric battery, during braking, and reusing it during subsequent acceleration. Battery possesses a relatively poor power density and slow charging of regenerated energy, when compared to hydro-pneumatic accumulators. A series hydraulic/electric synergy system – an energy efficient mechatronics system is proposed to overcome the drawbacks in the conventional electric vehicle with regenerative braking. Even though, electric battery provides higher energy density than the accumulator system, optimal sizing of the hydro-pneumatic accumulator and other process parameters in the system to provide better energy density and efficiency. However, a trade-off prevails between the system energy delivered and energy consumed. This gives rise to a multiple objective problem. The proposed multi-objective design optimization procedure based on an evolutionary strategy algorithm maximizes the energy efficiency of the system. The system simulation results after optimization show that, the optimal system parameters increase the energy efficiency by 3% and hydraulic regeneration efficiency by 17.3%. The suggested design methodology provides a basis for the design of a series hydraulic/electric synergy system as energy efficient and zero emission system. - Highlights: • Dynamic analysis of SHESS to investigate energy efficiency. • Optimization of system parameters based on multi-objective design strategy. • Evaluation of improvements in system energy efficiency and hydraulic regeneration energy. • Identification of conditions at which hydraulic regenerative efficiency is maximized for minimum energy consumption. • Results confirm advantages of using SHESS

  4. Examining the Internal Validity and Statistical Precision of the Comparative Interrupted Time Series Design by Comparison with a Randomized Experiment

    Science.gov (United States)

    St.Clair, Travis; Cook, Thomas D.; Hallberg, Kelly

    2014-01-01

    Although evaluators often use an interrupted time series (ITS) design to test hypotheses about program effects, there are few empirical tests of the design's validity. We take a randomized experiment on an educational topic and compare its effects to those from a comparative ITS (CITS) design that uses the same treatment group as the experiment…

  5. Design and application of a new series of gallbladder endoscopes that facilitate gallstone removal without gallbladder excision

    Science.gov (United States)

    Qiao, Tie; Huang, Wan-Chao; Luo, Xiao-Bing; Zhang, Yang-De

    2012-01-01

    In recent years, some Chinese doctors have proposed a new concept, gallstone removal without gallbladder excision, along with transition of the medical model. As there is no specialized endoscope for gallstone removal without gallbladder excision, we designed and produced a new series of gallbladder endoscopes and accessories that have already been given a Chinese invention patent (No. ZL200810199041.2). The design of these gallbladder endoscopes was based on the anatomy and physiology of the gallbladder, characteristics of gallbladder disease, ergonomics, and industrial design. This series of gallbladder endoscopes underwent clinical trials in two hospitals appointed by the State Administration of Traditional Chinese Medicine. The clinical trials showed that surgeries of gallstones, gallbladder polyps, and cystic duct calculus could be smoothly performed with these products. In summary, this series of gallbladder endoscopes is safe, reliable, and effective for gallstone removal without gallbladder excision. This note comprehensively introduces the research and design of this series of gallbladder endoscopes.

  6. Production design as a storytelling tool in the writing of the danish tv drama series The Legacy

    DEFF Research Database (Denmark)

    Redvall, E. N.; Sabroe, I. A.

    2016-01-01

    a script’ in order to execute a text. This article argues that the production designer can play a crucial part in the screenwriting process by contributing to the narrative and character design from an early stage. Focusing on the use of production design in the development, writing and production...... of the Danish drama series Arvingerne/The Legacy (2014–), the article analyses the implications of creator Maya Ilsøe’s close collaboration with the series’ production designer Mia Stensgaard. This collaboration not only centred on creating a special visual universe for the series, but also involved having...

  7. Design and characterization of a magneto-rheological series elastic actuator for a lower extremity exoskeleton

    Science.gov (United States)

    Chen, Bing; Zhao, Xuan; Ma, Hao; Qin, Ling; Liao, Wei-Hsin

    2017-10-01

    In this paper, an innovative actuator named magneto-rheological series elastic actuator (MRSEA) is designed for the knee joints of a lower extremity exoskeleton CUHK-EXO. MRSEA is designed to reduce the mechanical impedance of the exoskeleton and filter out unwanted collisions. It can also provide large controllable braking torque with low power, and hence improve the system energy efficiency. A description of CUHK-EXO developed to help paraplegic patients regain the mobility to stand up, sit down and walk is firstly introduced, followed by the mechanical design of MRSEA and simulation of the torsion spring pack (TSP) and magneto-rheological (MR) brake of MRSEA. Prototype of MRSEA is fabricated. Preliminary tests are performed to investigate the characteristics of the TSP and MR brake, and walking experiments with a paraplegic patient are performed to evaluate the performance of MRSEA. Experimental results of MRSEA match the modeling and simulation. As compared with the electric motor, the energy efficiency of the innovative MRSEA is improved by 52.8% during a gait cycle.

  8. Quasi-experimental study designs series-paper 6: risk of bias assessment.

    Science.gov (United States)

    Waddington, Hugh; Aloe, Ariel M; Becker, Betsy Jane; Djimeu, Eric W; Hombrados, Jorge Garcia; Tugwell, Peter; Wells, George; Reeves, Barney

    2017-09-01

    Rigorous and transparent bias assessment is a core component of high-quality systematic reviews. We assess modifications to existing risk of bias approaches to incorporate rigorous quasi-experimental approaches with selection on unobservables. These are nonrandomized studies using design-based approaches to control for unobservable sources of confounding such as difference studies, instrumental variables, interrupted time series, natural experiments, and regression-discontinuity designs. We review existing risk of bias tools. Drawing on these tools, we present domains of bias and suggest directions for evaluation questions. The review suggests that existing risk of bias tools provide, to different degrees, incomplete transparent criteria to assess the validity of these designs. The paper then presents an approach to evaluating the internal validity of quasi-experiments with selection on unobservables. We conclude that tools for nonrandomized studies of interventions need to be further developed to incorporate evaluation questions for quasi-experiments with selection on unobservables. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Series: Practical guidance to qualitative research. Part 2: Context, research questions and designs.

    Science.gov (United States)

    Korstjens, Irene; Moser, Albine

    2017-12-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting high-quality qualitative research in primary care. By 'novice' we mean Master's students and junior researchers, as well as experienced quantitative researchers who are engaging in qualitative research for the first time. This series addresses their questions and provides researchers, readers, reviewers and editors with references to criteria and tools for judging the quality of qualitative research papers. This second article addresses FAQs about context, research questions and designs. Qualitative research takes into account the natural contexts in which individuals or groups function to provide an in-depth understanding of real-world problems. The research questions are generally broad and open to unexpected findings. The choice of a qualitative design primarily depends on the nature of the research problem, the research question(s) and the scientific knowledge one seeks. Ethnography, phenomenology and grounded theory are considered to represent the 'big three' qualitative approaches. Theory guides the researcher through the research process by providing a 'lens' to look at the phenomenon under study. Since qualitative researchers and the participants of their studies interact in a social process, researchers influence the research process. The first article described the key features of qualitative research, the third article will focus on sampling, data collection and analysis, while the last article focuses on trustworthiness and publishing.

  10. Quasi-experimental study designs series-paper 1: introduction: two historical lineages.

    Science.gov (United States)

    Bärnighausen, Till; Røttingen, John-Arne; Rockers, Peter; Shemilt, Ian; Tugwell, Peter

    2017-09-01

    The objective of this study was to contrast the historical development of experiments and quasi-experiments and provide the motivation for a journal series on quasi-experimental designs in health research. A short historical narrative, with concrete examples, and arguments based on an understanding of the practice of health research and evidence synthesis. Health research has played a key role in developing today's gold standard for causal inference-the randomized controlled multiply blinded trial. Historically, allocation approaches developed from convenience and purposive allocation to alternate and, finally, to random allocation. This development was motivated both by concerns for manipulation in allocation as well as statistical and theoretical developments demonstrating the power of randomization in creating counterfactuals for causal inference. In contrast to the sequential development of experiments, quasi-experiments originated at very different points in time, from very different scientific perspectives, and with frequent and long interruptions in their methodological development. Health researchers have only recently started to recognize the value of quasi-experiments for generating novel insights on causal relationships. While quasi-experiments are unlikely to replace experiments in generating the efficacy and safety evidence required for clinical guidelines and regulatory approval of medical technologies, quasi-experiments can play an important role in establishing the effectiveness of health care practice, programs, and policies. The papers in this series describe and discuss a range of important issues in utilizing quasi-experimental designs for primary research and quasi-experimental results for evidence synthesis. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Two-part payments for the reimbursement of investments in health technologies.

    Science.gov (United States)

    Levaggi, Rosella; Moretto, Michele; Pertile, Paolo

    2014-04-01

    The paper studies the impact of alternative reimbursement systems on two provider decisions: whether to adopt a technology whose provision requires a sunk investment cost and how many patients to treat with it. Using a simple economic model we show that the optimal pricing policy involves a two-part payment: a price equal to the marginal cost of the patient whose benefit of treatment equals the cost of provision, and a separate payment for the partial reimbursement of capital costs. Departures from this scheme, which are frequent in DRG tariff systems designed around the world, lead to a trade-off between the objective of making effective technologies available to patients and the need to ensure appropriateness in use. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  12. The Validity and Precision of the Comparative Interrupted Time-Series Design: Three Within-Study Comparisons

    Science.gov (United States)

    St. Clair, Travis; Hallberg, Kelly; Cook, Thomas D.

    2016-01-01

    We explore the conditions under which short, comparative interrupted time-series (CITS) designs represent valid alternatives to randomized experiments in educational evaluations. To do so, we conduct three within-study comparisons, each of which uses a unique data set to test the validity of the CITS design by comparing its causal estimates to…

  13. Metacognition Modules: A Scaffolded Series of Online Assignments Designed to Improve Students’ Study Skills

    Directory of Open Access Journals (Sweden)

    Jean A. Cardinale

    2017-05-01

    Full Text Available Many first-year biology students begin college with high aspirations but limited skills in terms of those needed for their success. Teachers are increasingly focused on students’ lack of metacognitive awareness combined with students’ inability to self-regulate learning behaviors. To address this need, we have designed a series of out-of-class assignments to provide explicit instruction on memory and learning. Our metacognition modules consist of six video assignments with reflective journaling prompts, allowing students to explore the relationship between the learning cycle, neuroplasticity, memory function, expert and novice thinking, and effective study strategies. By setting lessons on improving study behavior within a biological context, we help students grasp the reason for changing their behavior based on an understanding of biological functions and their application to learning. Students who complete these scaffolded journaling assignments show a shift toward a growth mindset and a consistent ability to evaluate the efficacy of their own study behaviors. In this article, we discuss the modules and student assignments, as well as provide in depth support for faculty who wish to adopt the modules for their own courses.

  14. Zlib: A numerical library for optimal design of truncated power series algebra and map parameterization routines

    International Nuclear Information System (INIS)

    Yan, Y.T.

    1996-11-01

    A brief review of the Zlib development is given. Emphasized is the Zlib nerve system which uses the One-Step Index Pointers (OSIPs) for efficient computation and flexible use of the Truncated Power Series Algebra (TPSA). Also emphasized is the treatment of parameterized maps with an object-oriented language (e.g. C++). A parameterized map can be a Vector Power Series (Vps) or a Lie generator represented by an exponent of a Truncated Power Series (Tps) of which each coefficient is an object of truncated power series

  15. Design of an Active Bumper with a Series Elastic Actuator for Pedestrian Protection of Small Unmanned Vehicles

    Science.gov (United States)

    Terumasa, Narukawa; Tomoki, Tsuge; Hiroshi, Yamamoto; Takahiro, Suzuki

    2016-09-01

    When autonomous unmanned vehicles are operated on sidewalks, the vehicles must have high safety standards such as avoiding injury when they come in contact with pedestrians. In this study, we established a design for preventing serious injury when such collisions occur. We designed an active bumper with a series elastic actuator, with the goal of avoiding serious injury to a pedestrian in a collision with a small unmanned vehicle. The series elastic actuator comprised an elastic element in series with a table driven by a ball screw and servo motor. The active bumper was used to control the contact force between a vehicle and a pedestrian. The optimal force for minimizing the deflection of the object of the collision was derived, and the actuator controlled to apply this optimal force. Numerical simulations showed that the active bumper was successful in improving the collision safety of small unmanned vehicles.

  16. Therapeutic Assessment for Preadolescent Boys with Oppositional Defiant Disorder: A Replicated Single-Case Time-Series Design

    Science.gov (United States)

    Smith, Justin D.; Handler, Leonard; Nash, Michael R.

    2010-01-01

    The Therapeutic Assessment (TA) model is a relatively new treatment approach that fuses assessment and psychotherapy. The study examines the efficacy of this model with preadolescent boys with oppositional defiant disorder and their families. A replicated single-case time-series design with daily measures is used to assess the effects of TA and to…

  17. Series vs parallel connected organic tandem solar cells : cell performance and impact on the design and operation of functional modules

    NARCIS (Netherlands)

    Etxebarriaa, I.; Furlan, A.; Ajuria, J.; Fecher, F.W.; Voigt, de M.J.A.; Brabecd, C.J.; Wienk, M.M.; Slooff, L.H.; Veenstra, S.; Gilot, J.; Pacios, R.

    2014-01-01

    Tandem solar cells are the best approach to maximize the light harvesting and adjust the overall absorption of the cell to the solar irradiance spectrum. Usually, the front and back subcells are connected in series in two-terminal device (2T) designs which require a current matching between both

  18. The de Bono LAMS Sequence Series: Template Designs as Knowledge-Mobilising Strategy for 21st Century Higher Education

    Science.gov (United States)

    Dobozy, Eva

    2012-01-01

    In this paper, the five interlocking de Bono LAMS sequences are introduced as a new form of generic template designs. This transdisciplinary knowledge-mobilising strategy is based on Edward de Bono's attention-directing ideas and thinking skills, commonly known as the CoRT tools. The development of the de Bono LAMS sequence series is an important…

  19. Design and Development of a Series of Potent and Selective Type II Inhibitors of CDK8

    Science.gov (United States)

    2016-01-01

    Using Sorafenib as a starting point, a series of potent and selective inhibitors of CDK8 was developed. When cocrystallized with CDK8 and cyclin C, these compounds exhibit a Type-II (DMG-out) binding mode. PMID:27326333

  20. The Future of STEM Curriculum and Instructional Design: A Research and Development Agenda for Learning Designers. Report of a Workshop Series

    Science.gov (United States)

    Center for the Study of Mathematics Curriculum, 2012

    2012-01-01

    In 2009-10 a series of Workshops was organized to focus on STEM (science, technology, engineering, and mathematics) learning design for young students and adolescents. The objective was to provide visionary leadership to the education community by: (a) identifying and analyzing the needs and opportunities for future STEM curriculum development and…

  1. Analog series-based scaffolds: computational design and exploration of a new type of molecular scaffolds for medicinal chemistry

    Science.gov (United States)

    Dimova, Dilyana; Stumpfe, Dagmar; Hu, Ye; Bajorath, Jürgen

    2016-01-01

    Aim: Computational design of and systematic search for a new type of molecular scaffolds termed analog series-based scaffolds. Materials & methods: From currently available bioactive compounds, analog series were systematically extracted, key compounds identified and new scaffolds isolated from them. Results: Using our computational approach, more than 12,000 scaffolds were extracted from bioactive compounds. Conclusion: A new scaffold definition is introduced and a computational methodology developed to systematically identify such scaffolds, yielding a large freely available scaffold knowledge base. PMID:28116132

  2. Design of an isopropanol–acetone–hydrogen chemical heat pump with exothermic reactors in series

    International Nuclear Information System (INIS)

    Xu, Min; Duan, Yanjun; Xin, Fang; Huai, Xiulan; Li, Xunfeng

    2014-01-01

    The isopropanol–acetone–hydrogen chemical heat pump system with a series of exothermic reactors in which the reaction temperatures decrease successively is proposed. This system shows the better energy performances as compared with the traditional system with a single exothermic reactor, especially when the higher upgraded temperature is need. At the same amounts of the heat released, the work input of the compressor and the heater are both reduced notably. The results indicate that the advantages of the IAH-CHP system with exothermic reactors in series are obvious. - Highlights: • We propose the IAH-CHP system with exothermic reactors in series. • The COP and exergy efficiency of the system increase by 7.6% and 10.3% respectively. • The work input of the system is reduced notably at the same quantity of heat released

  3. “ALGORITHMIC SUSTAINABLE DESIGN: THE FUTURE OF ARCHITECTURAL THEORY”, A SERIES OF 12 LECTURES BY NIKOS A. SALINGAROS.

    Directory of Open Access Journals (Sweden)

    Nicola Giacomo A.G. Linza IV

    2008-07-01

    Full Text Available Professor Nikos A. Salingaros, a practicing Urbanist and Architectural Theorist, presents a powerful series of compelling hour-long lectures that apply cutting-edge mathematical techniques to architectural design. This breakthrough lecture series seeks to explain the foundations of architectural form using scientific concepts from hierarchical scaling to memes. Dr. Salingaros has applied the most exciting scientific developments of the past decade, such as fractals, complexity theory, evolutionary biology, and artificial intelligence to produce a series of lectures explaining in great detail the mathematical and scientific basis behind structure, and how structures affect the way in which human beings interact with the built environment. The twelve lectures were integrated to relate topics such as algorithmic processes, cellular automata, Sierpinski carpets, harmony-seeking computations, generative codes, and New Urbanist codes. The lectures were transmitted live via streaming video to participating institutions throughout the world, and have now been made freely available.

  4. Series: Practical guidance to qualitative research : part 2: context, research questions and designs

    NARCIS (Netherlands)

    Albine Moser; Irene Korstjens

    2017-01-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting

  5. Series hybrid vehicle system analysis using an in-wheel motor design

    NARCIS (Netherlands)

    Paulides, J.J.H.; Kazmin, Evgeny; Gysen, B.L.J.; Lomonova, E.

    2008-01-01

    Hybrid vehicles, which employ a technology combining gasoline and electric motors, are a hot item these days for transporters looking for ways to cut their fuel bills. To date, commercial systems implement diesel assisted electrical drives. As such the electrical motor is placed in a series or

  6. Two-Part Models for Fractional Responses Defined as Ratios of Integers

    Directory of Open Access Journals (Sweden)

    Harald Oberhofer

    2014-09-01

    Full Text Available This paper discusses two alternative two-part models for fractional response variables that are defined as ratios of integers. The first two-part model assumes a Binomial distribution and known group size. It nests the one-part fractional response model proposed by Papke and Wooldridge (1996 and, thus, allows one to apply Wald, LM and/or LR tests in order to discriminate between the two models. The second model extends the first one by allowing for overdispersion in the data. We demonstrate the usefulness of the proposed two-part models for data on the 401(k pension plan participation rates used in Papke and Wooldridge (1996.

  7. Series: Practical guidance to qualitative research: part 2: context, research questions and designs

    OpenAIRE

    Moser, Albine; Korstjens, Irene

    2017-01-01

    In the course of our supervisory work over the years, we have noticed that qualitative research tends to evoke a lot of questions and worries, so-called frequently asked questions (FAQs). This series of four articles intends to provide novice researchers with practical guidance for conducting high-quality qualitative research in primary care. By ‘novice’ we mean Master’s students and junior researchers, as well as experienced quantitative researchers who are engaging in qualitative research f...

  8. Design, operation and control of series-connected power converters for offshore wind parks

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, Alejandro Garces

    2012-07-01

    Offshore wind farms need to develop technologies that fulfill three main objectives:Efficiency, power density and reliability. The purpose of this thesis is to study an HVDC transmission system based on series connection of the turbines which theoretically meet these three objectives. A new topology of matrix converter operated at high frequency is proposed. This converter is studied using different modulation algorithms. Simulation and experimental results demonstrated that the converter can be operated as a current source converter with high efficiency. An optimal control based on a linear quadratic regulator is propose dto control the matrix converter as well as the converter placed on shore. Results demonstrated the high performance of this type of control and its simplicity for implementation. An stationary state study based on non-linear programming and Montecarlo simulation was carried out to determine the performance of the concept for long-term operation. Series connection is an efficient technology if and only if the differences in the effective wind velocity are small. This aspect limits the number of wind turbines that can be connected in series, since a numerous number of turbines will lead to high covariances in the distribution of the wind. A complementary study about active filter and reactive power compensation was carried out using an optimization-based algorithm. (Author)

  9. Visualization of Time-Series Sensor Data to Inform the Design of Just-In-Time Adaptive Stress Interventions.

    Science.gov (United States)

    Sharmin, Moushumi; Raij, Andrew; Epstien, David; Nahum-Shani, Inbal; Beck, J Gayle; Vhaduri, Sudip; Preston, Kenzie; Kumar, Santosh

    2015-09-01

    We investigate needs, challenges, and opportunities in visualizing time-series sensor data on stress to inform the design of just-in-time adaptive interventions (JITAIs). We identify seven key challenges: massive volume and variety of data, complexity in identifying stressors, scalability of space, multifaceted relationship between stress and time, a need for representation at multiple granularities, interperson variability, and limited understanding of JITAI design requirements due to its novelty. We propose four new visualizations based on one million minutes of sensor data (n=70). We evaluate our visualizations with stress researchers (n=6) to gain first insights into its usability and usefulness in JITAI design. Our results indicate that spatio-temporal visualizations help identify and explain between- and within-person variability in stress patterns and contextual visualizations enable decisions regarding the timing, content, and modality of intervention. Interestingly, a granular representation is considered informative but noise-prone; an abstract representation is the preferred starting point for designing JITAIs.

  10. Reliability Based Optimal Design of Vertical Breakwaters Modelled as a Series System Failure

    DEFF Research Database (Denmark)

    Christiani, E.; Burcharth, H. F.; Sørensen, John Dalsgaard

    1996-01-01

    Reliability based design of monolithic vertical breakwaters is considered. Probabilistic models of important failure modes such as sliding and rupture failure in the rubble mound and the subsoil are described. Characterisation of the relevant stochastic parameters are presented, and relevant design...... variables are identified and an optimal system reliability formulation is presented. An illustrative example is given....

  11. Winding design of series AC inductor for dual active bridge converters

    DEFF Research Database (Denmark)

    Shen, Zhan; Wang, Huai; Shen, Yanfeng

    2018-01-01

    The ac resistance and parasitic capacitance of the inductor are the primary considerations in the winding design for the dual-active bridge converter (DAB). They are dependent of up to four independent structure variables. The interactive restrictions between those variables makes the design diff...

  12. 'Cut in two', Part 1: Exposing the Seam in Q 12:42−46

    African Journals Online (AJOL)

    2015-06-22

    Jun 22, 2015 ... 'Cut in two', Part 1: Exposing the Seam in Q 12:42−46. This publication ..... on as normal for everyone except the appointed slave. This .... Greek and English with parallels from the Gospels of Mark and Thomas, Fortress,.

  13. Procedure for the Design of a Hybrid-Series Vehicle and the Hybridization Degree Choice

    Directory of Open Access Journals (Sweden)

    Antonino Coccia

    2010-03-01

    Full Text Available For years, the interest of the UDR1 research group has focused on the development of a Hybrid Series (HS vehicle, different from the standard one thanks to the use of a Gas Turbine set (GT as a thermal engine. The reason for this choice resides in the opportunity to reduce weight and dimensions, in comparison to a traditional Internal Combustion Engine (ICE. It is not possible to use the GT engine set directly for the vehicle traction, therefore the UDR1 HS configuration shows the GT set connected with the electric generator only. The result is that the traction is purely electric. The resulting engine configuration is a commonly defined Hybrid Series. Many efforts are spent in the definition of a generic scientific method to define the correct ratio (Degree of Hybridization between the installed power of the battery pack and that of the GT electric generator, which simultaneously guarantees the life of the battery pack and the capacity of the vehicle to complete a common mission without lack of energy or stopping. This article reports a method to define the power ratio between battery pack and GT generator, applied to a recent commission for the development of a mini city bus.

  14. Series resonant converter with auxiliary winding turns: analysis, design and implementation

    Science.gov (United States)

    Lin, Bor-Ren

    2018-05-01

    Conventional series resonant converters have researched and applied for high-efficiency power units due to the benefit of its low switching losses. The main problems of series resonant converters are wide frequency variation and high circulating current. Thus, resonant converter is limited at narrow input voltage range and large input capacitor is normally adopted in commercial power units to provide the minimum hold-up time requirement when AC power is off. To overcome these problems, the resonant converter with auxiliary secondary windings are presented in this paper to achieve high voltage gain at low input voltage case such as hold-up time duration when utility power is off. Since the high voltage gain is used at low input voltage cased, the frequency variation of the proposed converter compared to the conventional resonant converter is reduced. Compared to conventional resonant converter, the hold-up time in the proposed converter is more than 40ms. The larger magnetising inductance of transformer is used to reduce the circulating current losses. Finally, a laboratory prototype is constructed and experiments are provided to verify the converter performance.

  15. Academic Primer Series: Five Key Papers about Study Designs in Medical Education.

    Science.gov (United States)

    Gottlieb, Michael; Chan, Teresa M; Fredette, Jenna; Messman, Anne; Robinson, Daniel W; Cooney, Robert; Boysen-Osborn, Megan; Sherbino, Jonathan

    2017-06-01

    A proper understanding of study design is essential to creating successful studies. This is also important when reading or peer reviewing publications. In this article, we aimed to identify and summarize key papers that would be helpful for faculty members interested in learning more about study design in medical education research. The online discussions of the 2016-2017 Academic Life in Emergency Medicine Faculty Incubator program included a robust and vigorous discussion about education study design, which highlighted a number of papers on that topic. We augmented this list of papers with further suggestions by expert mentors. Via this process, we created a list of 29 papers in total on the topic of medical education study design. After gathering these papers, our authorship group engaged in a modified Delphi approach to build consensus on the papers that were most valuable for the understanding of proper study design in medical education. We selected the top five most highly rated papers on the topic domain of study design as determined by our study group. We subsequently summarized these papers with respect to their relevance to junior faculty members and to faculty developers. This article summarizes five key papers addressing study design in medical education with discussions and applications for junior faculty members and faculty developers. These papers provide a basis upon which junior faculty members might build for developing and analyzing studies.

  16. Unlimited Horizons: Design and Development of the U-2. [NASA Aeronautics Book Series

    Science.gov (United States)

    Merlin, Peter W.

    2015-01-01

    This book describes the creation, history, design, and research value of the U-2 program. It also describes the involvement of NACA, as a cover story, and the later use by NASA of these aircraft as environmental research platforms.

  17. Parameter Design for the Energy Regeneration System of Series Hydraulic Hybrid Bus

    Directory of Open Access Journals (Sweden)

    Song Yunpu

    2014-02-01

    Full Text Available This paper simplifies the energy recovery process in the series hydraulic hybrid bus’ energy regeneration system into a process in which the main axle’s moment of inertia drives the secondary element variable delivery pump/motor and brings hydraulic oil from the oil tank to the accumulator. This process enables braking of the vehicle and also allows recovery of energy to the accumulator. Based on the flow equation for the secondary element variable delivery pump/motor and the torque equilibrium equation for its axle, the force equilibrium equation for vehicle braking and the pressure variation and flow continuity equations for the accumulator, simulation studies are conducted to analyze the effects of various system parameters, such as accumulator capacity, displacement of the secondary element variable delivery pump/motor, initial operating pressure of the system, etc. on system performance during regenerative braking.

  18. Analysis and design of a series resonant converter with wide operating range and minimized transformer ratings

    DEFF Research Database (Denmark)

    Dincan, Catalin Gabriel; Kjær, Philip Carne; Chen, Yu-Hsing

    2017-01-01

    ) allows the transformer design to be determined by peak load and maximum switching frequency, while still avoiding over-excitation at reduced load and reduced excitation frequency. This promises transformer size reduction of more than 50%, while losses are kept below 1% from zero to nominal power. A step...

  19. Reliability optimization for series systems under uncertain component failure rates in the design phase

    NARCIS (Netherlands)

    Ge, Q.; Peng, H.; van Houtum, G.J.J.A.N.; Adan, I.J.B.F.

    2018-01-01

    We develop an optimization model to determine the reliability design of critical components in a serial system. The system is under a service contract, and a penalty cost has to be paid by the OEM when the total system down time exceeds a predetermined level, which complicates the evaluation of the

  20. A Higher-Order Neural Network Design for Improving Segmentation Performance in Medical Image Series

    International Nuclear Information System (INIS)

    Selvi, Eşref; Selver, M Alper; Güzeliş, Cüneyt; Dicle, Oǧuz

    2014-01-01

    Segmentation of anatomical structures from medical image series is an ongoing field of research. Although, organs of interest are three-dimensional in nature, slice-by-slice approaches are widely used in clinical applications because of their ease of integration with the current manual segmentation scheme. To be able to use slice-by-slice techniques effectively, adjacent slice information, which represents likelihood of a region to be the structure of interest, plays critical role. Recent studies focus on using distance transform directly as a feature or to increase the feature values at the vicinity of the search area. This study presents a novel approach by constructing a higher order neural network, the input layer of which receives features together with their multiplications with the distance transform. This allows higher-order interactions between features through the non-linearity introduced by the multiplication. The application of the proposed method to 9 CT datasets for segmentation of the liver shows higher performance than well-known higher order classification neural networks

  1. A 10-kW series resonant converter design, transistor characterization, and base-drive optimization

    Science.gov (United States)

    Robson, R. R.; Hancock, D. J.

    1982-01-01

    The development, components, and performance of a transistor-based 10 kW series resonant converter for use in resonant circuits in space applications is described. The transistors serve to switch on the converter current, which has a half-sinusoid waveform when the transistor is in saturation. The goal of the program was to handle an input-output voltage range of 230-270 Vdc, an output voltage range of 200-500 Vdc, and a current limit range of 0-20 A. Testing procedures for the D60T and D7ST transistors are outlined and base drive waveforms are presented. The total device dissipation was minimized and found to be independent of the regenerative feedback ratio at lower current levels. Dissipation was set at within 10% and rise times were found to be acceptable. The finished unit displayed a 91% efficiency at full power levels of 500 V and 20 A and 93.7% at 500 V and 10 A.

  2. A basket two-part model to analyze medical expenditure on interdependent multiple sectors.

    Science.gov (United States)

    Sugawara, Shinya; Wu, Tianyi; Yamanishi, Kenji

    2018-05-01

    This study proposes a novel statistical methodology to analyze expenditure on multiple medical sectors using consumer data. Conventionally, medical expenditure has been analyzed by two-part models, which separately consider purchase decision and amount of expenditure. We extend the traditional two-part models by adding the step of basket analysis for dimension reduction. This new step enables us to analyze complicated interdependence between multiple sectors without an identification problem. As an empirical application for the proposed method, we analyze data of 13 medical sectors from the Medical Expenditure Panel Survey. In comparison with the results of previous studies that analyzed the multiple sector independently, our method provides more detailed implications of the impacts of individual socioeconomic status on the composition of joint purchases from multiple medical sectors; our method has a better prediction performance.

  3. Subway Mandibular Buccal Defect Blocked with Two Part Prosthesis Unified by Earth Magnets

    OpenAIRE

    Punjani, Shikha; Arora, Aman; Upadhyaya, Viram

    2012-01-01

    This clinical report describes the fabrication of a two-piece obturator used to close the mandibular buccal defect. Two-piece obturator prosthesis was fabricated with clear heat cure acrylic resin to be used during the healing period following the marsupialization of odontogenic keratocyst which had lead to the loss of portions of the mandibular buccal region. The prosthesis fabricated in two parts was joined by the rare earth magnets. Retention was increased by lining the prosthesis with tis...

  4. Design and optimization of multi-class series-parallel linear electromagnetic array artificial muscle.

    Science.gov (United States)

    Li, Jing; Ji, Zhenyu; Shi, Xuetao; You, Fusheng; Fu, Feng; Liu, Ruigang; Xia, Junying; Wang, Nan; Bai, Jing; Wang, Zhanxi; Qin, Xiansheng; Dong, Xiuzhen

    2014-01-01

    Skeletal muscle exhibiting complex and excellent precision has evolved for millions of years. Skeletal muscle has better performance and simpler structure compared with existing driving modes. Artificial muscle may be designed by analyzing and imitating properties and structure of skeletal muscle based on bionics, which has been focused on by bionic researchers, and a structure mode of linear electromagnetic array artificial muscle has been designed in this paper. Half sarcomere is the minimum unit of artificial muscle and electromagnetic model has been built. The structural parameters of artificial half sarcomere actuator were optimized to achieve better movement performance. Experimental results show that artificial half sarcomere actuator possesses great motion performance such as high response speed, great acceleration, small weight and size, robustness, etc., which presents a promising application prospect of artificial half sarcomere actuator.

  5. Principles of Stochastic Generation of Hydrologic Time Series for Reservoir Planning and Design: A Case Study.

    OpenAIRE

    Guimarães, Rita Cabral; Santos, Emidio Gil

    2011-01-01

    Simulation has been an important tool for planners in many fields of knowledge. In the field of water resources the uncertainties due to unknown data population and the short length of the records work together to make the simulation especially important. The major utilization of water resources at the level needed in modern society makes water storage essential for satisfying the demand. Therefore, the need to reduce the uncertainty in the design of water storage capacity is an important pro...

  6. Applications of Human Performance Models to System Design: Defense Research Series. Volume 2

    Science.gov (United States)

    1989-01-01

    Animation of Human Figures ... ........... .. 375 Norman I. Badler SAFEWORK: Software to Analyse and Design Workplaces ... .......... .389 Robert Gilbert...workload estimation is generally associated with Senders’ research on monitoring tasks (e.g., Senders, Elkind, Grignetti, & Smallwood , 1966; Senders...controller’s workload, IEEE Transactions on Systems, Man, and Cybernetics, SMC-8(6) :492-493. Senders, J. W., Elkind, J. I., Grignetti, M. C., and Smallwood , R

  7. Methodology Series Module 9: Designing Questionnaires and Clinical Record Forms - Part II.

    Science.gov (United States)

    Setia, Maninder Singh

    2017-01-01

    This article is a continuation of the previous module on designing questionnaires and clinical record form in which we have discussed some basic points about designing the questionnaire and clinical record forms. In this section, we will discuss the reliability and validity of questionnaires. The different types of validity are face validity, content validity, criterion validity, and construct validity. The different types of reliability are test-retest reliability, inter-rater reliability, and intra-rater reliability. Some of these parameters are assessed by subject area experts. However, statistical tests should be used for evaluation of other parameters. Once the questionnaire has been designed, the researcher should pilot test the questionnaire. The items in the questionnaire should be changed based on the feedback from the pilot study participants and the researcher's experience. After the basic structure of the questionnaire has been finalized, the researcher should assess the validity and reliability of the questionnaire or the scale. If an existing standard questionnaire is translated in the local language, the researcher should assess the reliability and validity of the translated questionnaire, and these values should be presented in the manuscript. The decision to use a self- or interviewer-administered, paper- or computer-based questionnaire depends on the nature of the questions, literacy levels of the target population, and resources.

  8. Methodology Series Module 9: Designing Questionnaires and Clinical Record Forms – Part II

    Science.gov (United States)

    Setia, Maninder Singh

    2017-01-01

    This article is a continuation of the previous module on designing questionnaires and clinical record form in which we have discussed some basic points about designing the questionnaire and clinical record forms. In this section, we will discuss the reliability and validity of questionnaires. The different types of validity are face validity, content validity, criterion validity, and construct validity. The different types of reliability are test-retest reliability, inter-rater reliability, and intra-rater reliability. Some of these parameters are assessed by subject area experts. However, statistical tests should be used for evaluation of other parameters. Once the questionnaire has been designed, the researcher should pilot test the questionnaire. The items in the questionnaire should be changed based on the feedback from the pilot study participants and the researcher's experience. After the basic structure of the questionnaire has been finalized, the researcher should assess the validity and reliability of the questionnaire or the scale. If an existing standard questionnaire is translated in the local language, the researcher should assess the reliability and validity of the translated questionnaire, and these values should be presented in the manuscript. The decision to use a self- or interviewer-administered, paper- or computer-based questionnaire depends on the nature of the questions, literacy levels of the target population, and resources. PMID:28584367

  9. Systematic design and research on a series of cadmium coordination polymers assembled due to tetracarboxylate ligands

    Energy Technology Data Exchange (ETDEWEB)

    Lü, Lei; Mu, Bao; Li, Chang-Xia; Huang, Ru-Dan, E-mail: huangrd@bit.edu.cn

    2016-02-15

    A series of metal-organic frameworks (MOFs) have been prepared by tetracarboxylate ligands and Cd(II) ions under the hydrothermal or solvothermal conditions with the formulas of {[Cd_2(L_1)(H_2O)_4]·H_2O}{sub n} (1), {[(CH_3)_2NH_2]_2[Cd(L_1)]}{sub n} (2), [Cd(L{sub 2}){sub 0.5}(H{sub 2}O)]{sub n} (3), {[(CH_3)_2NH_2]_2 [Cd(L_2)]·2DMF}{sub n} (4), [Cd(L{sub 3}){sub 0.5}(H{sub 2}O)]{sub n} (5), {[Cd(L_3)_0_._5(H_2O)]·CH_3OH}{sub n} (6), {[(CH_3)_2NH_2]_2[Cd_3(L_4)_2]}{sub n} (7) (H{sub 4}L{sub 1}=[1,1′:4′,1″-terphenyl]-2,2″,5,5″-tetracarboxylic acid; H{sub 4}L{sub 2}=[1,1′:4′,1″-terphenyl]-2′,4,4″,5′-tetracarboxylic acid; H{sub 4}L{sub 3}=[1,1′:3′,1″-terphenyl]-2′,3,3″,5′-tetracarboxylic acid; H{sub 4}L{sub 4}=[1,1′:4′,1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid), which are characterized by single-crystal X-ray diffraction, elemental analyses, IR, TGA and PXRD. Complex 1 exhibits a three-dimensional (3D) supramolecular framework based on two-dimensional (2D) coordination networks. Complexes 2 and 4 possess 3D framework based on the 1D right-handed helix channels. Complexes 3 and 7 are a 3D architecture containing two different channels. Isostructural complexes 5 and 6 display 3D framework. The different synthetic methods and coordination modes of the tetracarboxylates ligands have effect on formation of various MOFs. Moreover, the luminescent properties and N{sub 2} adsorption behaviors have been reported. - Graphical abstract: A series of cadmium(II) high-dimensional coordination polymers constructed from four different kinds of tetracarboxylate ligands have been successfully prepared under hydrothermal or solvothermal conditions. The effect of solvents, the coordination modes of the tetracarboxylates and positions of carboxylate groups on the architectures of complexes 1–7 have been investigated in detail. The luminescent properties of the part of complexes, N{sub 2} adsorption behaviors of complexes 2, 4–7 have

  10. Design method for low order two-degree-of-freedom controller based on Pade approximation of the denominator series expansion

    International Nuclear Information System (INIS)

    Ishikawa, Nobuyuki; Suzuki, Katsuo

    1999-01-01

    Having advantages of setting independently feedback characteristics such as disturbance rejection specification and reference response characteristics, two-degree-of-freedom (2DOF) control is widely utilized to improve the control performance. The ordinary design method such as model matching usually derives high-ordered feedforward element of 2DOF controller. In this paper, we propose a new design method for low order feedforward element which is based on Pade approximation of the denominator series expansion. The features of the proposed method are as follows: (1) it is suited to realize reference response characteristics in low frequency region, (2) the order of the feedforward element can be selected apart from the feedback element. These are essential to the 2DOF controller design. With this method, 2DOF reactor power controller is designed and its control performance is evaluated by numerical simulation with reactor dynamics model. For this evaluation, it is confirmed that the controller designed by the proposed method possesses equivalent control characteristics to the controller by the ordinary model matching method. (author)

  11. Decontamination laboratory design for iron pipes contaminated with uranium and thorium series

    International Nuclear Information System (INIS)

    Sahyun, Adelia; Sordi, Gian M.; Ghobril, Carlos N.; Puga Sanches, Matias; Rodrigues, Demerval L.

    2008-01-01

    The Brazilian soil is very rich in the ore processing, after some time, the pipes are contaminated with trace levels of uranium and thorium. When the pipes are exchanged, to recovery the funds, the best is to sell them as scrap, however, because they are contaminated and present a considerable amount of dose can not be marketed until they are decontaminated. The question is that the tube is incrusted with the contaminated material, and is difficult to remove it. For the removal this material, that comes to be 2 inches thick, for the larger pipes diameter, requires special equipment as a motor-pump units with ultra high pressure water jetting, of the order of 40000 psi. The purpose of this paper is to suggest a design of one laboratory able to perform the decontamination avoiding large scale production of radioactive wastes. The solids and liquids wastes produced during the process of decontamination will be collected in different containers and classified according to their contamination level. The laboratory was designed to facilitate its decontamination with a minimum dose for their operators. The most difficult question to be solved during the project, was to perform the laboratory decontamination during the pipe decontamination in continuous operation since we can't stop the process for the reason of it expensive cost. The paper will show how will be made all the steps of the tubes decontamination and the laboratory decontamination. It will be shown how we collect the liquids and solids wastes, separate, for their classification. After the pipe, decontamination we show as will be measure the dose to release or to return for the laboratory to development a further decontamination. At last, it will show the temporary storage place for the decontaminated pipes that will be later collected as scrap. (author)

  12. Quasi-experimental study designs series-paper 2: complementary approaches to advancing global health knowledge.

    Science.gov (United States)

    Geldsetzer, Pascal; Fawzi, Wafaie

    2017-09-01

    Quasi-experiments have been infrequently used in the health sciences. Focusing on health systems implementation research, this article details key advantages of quasi-experiments and argues that they can complement (but not replace) randomized evaluations. Specifically, it may be possible to use a quasi-experiment to study the causal effect of an intervention that cannot feasibly be randomized or that would be unethical (e.g., because the intervention has become the standard of care) to test in a randomized controlled trial (RCT). In addition, because they usually take advantage of routinely collected data, quasi-experiments may be feasible when it is too costly (either financially or in terms of the required time) to carry out a RCT - an important advantage in research on health systems, which vary widely between settings. Nonetheless, we argue that RCTs will continue to be indispensable for implementation research because i) the assumptions needed to establish causality with a quasi-experiment are often unverifiable, ii) available data frequently do not allow for a rigorous quasi-experiment, and iii) randomized designs tend to lend themselves more to informing policy makers of causal effects prior to (or during) the full-scale rollout of an intervention than quasi-experiments. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Much ado about two: reconsidering retransformation and the two-part model in health econometrics.

    Science.gov (United States)

    Mullahy, J

    1998-06-01

    In health economics applications involving outcomes (y) and covariates (x), it is often the case that the central inferential problems of interest involve E[y/x] and its associated partial effects or elasticities. Many such outcomes have two fundamental statistical properties: y > or = 0; and the outcome y = 0 is observed with sufficient frequency that the zeros cannot be ignored econometrically. This paper (1) describes circumstances where the standard two-part model with homoskedastic retransformation will fail to provide consistent inferences about important policy parameters; and (2) demonstrates some alternative approaches that are likely to prove helpful in applications.

  14. Design of Passive Power Filter for Hybrid Series Active Power Filter using Estimation, Detection and Classification Method

    Science.gov (United States)

    Swain, Sushree Diptimayee; Ray, Pravat Kumar; Mohanty, K. B.

    2016-06-01

    This research paper discover the design of a shunt Passive Power Filter (PPF) in Hybrid Series Active Power Filter (HSAPF) that employs a novel analytic methodology which is superior than FFT analysis. This novel approach consists of the estimation, detection and classification of the signals. The proposed method is applied to estimate, detect and classify the power quality (PQ) disturbance such as harmonics. This proposed work deals with three methods: the harmonic detection through wavelet transform method, the harmonic estimation by Kalman Filter algorithm and harmonic classification by decision tree method. From different type of mother wavelets in wavelet transform method, the db8 is selected as suitable mother wavelet because of its potency on transient response and crouched oscillation at frequency domain. In harmonic compensation process, the detected harmonic is compensated through Hybrid Series Active Power Filter (HSAPF) based on Instantaneous Reactive Power Theory (IRPT). The efficacy of the proposed method is verified in MATLAB/SIMULINK domain and as well as with an experimental set up. The obtained results confirm the superiority of the proposed methodology than FFT analysis. This newly proposed PPF is used to make the conventional HSAPF more robust and stable.

  15. Structure-Based Design of a Novel Series of Potent, Selective Inhibitors of the Class I Phosphatidylinositol 3-Kinases

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Adrian L.; D’Angelo, Noel D.; Bo, Yunxin Y.; Booker, Shon K.; Cee, Victor J.; Herberich, Brad; Hong, Fang-Tsao; Jackson, Claire L.M.; Lanman, Brian A.; Liu, Longbin; Nishimura, Nobuko; Pettus, Liping H.; Reed, Anthony B.; Tadesse, Seifu; Tamayo, Nuria A.; Wurz, Ryan P.; Yang, Kevin; Andrews, Kristin L.; Whittington, Douglas A.; McCarter, John D.; Miguel, Tisha San; Zalameda, Leeanne; Jiang, Jian; Subramanian, Raju; Mullady, Erin L.; Caenepeel, Sean; Freeman, Daniel J.; Wang, Ling; Zhang, Nancy; Wu, Tian; Hughes, Paul E.; Norman, Mark H. (Amgen)

    2012-09-17

    A highly selective series of inhibitors of the class I phosphatidylinositol 3-kinases (PI3Ks) has been designed and synthesized. Starting from the dual PI3K/mTOR inhibitor 5, a structure-based approach was used to improve potency and selectivity, resulting in the identification of 54 as a potent inhibitor of the class I PI3Ks with excellent selectivity over mTOR, related phosphatidylinositol kinases, and a broad panel of protein kinases. Compound 54 demonstrated a robust PD-PK relationship inhibiting the PI3K/Akt pathway in vivo in a mouse model, and it potently inhibited tumor growth in a U-87 MG xenograft model with an activated PI3K/Akt pathway.

  16. Design, synthesis, and in vivo SAR of a novel series of pyrazolines as potent selective androgen receptor modulators.

    Science.gov (United States)

    Zhang, Xuqing; Li, Xiaojie; Allan, George F; Sbriscia, Tifanie; Linton, Olivia; Lundeen, Scott G; Sui, Zhihua

    2007-08-09

    A novel series of pyrazolines 2 have been designed, synthesized, and evaluated by in vivo screening as tissue-selective androgen receptor modulators (SARMs). Structure-activity relationships (SAR) were investigated at the R1 to R6 positions as well as the core pyrazoline ring and the anilide linker. Overall, strong electron-withdrawing groups at the R1 and R2 positions and a small group at the R5 and R6 position are optimal for AR agonist activity. The (S)-isomer of 7c exhibits more potent AR agonist activity than the corresponding (R)-isomer. (S)-7c exhibited an overall partial androgenic effect but full anabolic effect via oral administration in castrated rats. It demonstrated a noticeable antiandrogenic effect on prostate in intact rats with endogenous testosterone. Thus, (S)-7c is a tissue-selective nonsteroidal androgen receptor modulator with agonist activity on muscle and mixed agonist and antagonist activity on prostate.

  17. Design and synthesis of tricyclic tetrahydroquinolines as a new series of nonsteroidal selective androgen receptor modulators (SARMs).

    Science.gov (United States)

    Nagata, Naoya; Miyakawa, Motonori; Amano, Seiji; Furuya, Kazuyuki; Yamamoto, Noriko; Inoguchi, Kiyoshi

    2011-03-15

    Some tricyclic tetrahydroquinolines (THQs) were found to have the potential of a new series of nonsteroidal selective androgen receptor modulators (SARMs). Compound 5b was first designed and synthesized under our hypothesis based on a four-point pharmacophoric requirement of the 3-carbonyl, 18-methyl, 17-hydroxyl, and 13-quaternary carbon groups of dihydrotestosterone (DHT). It was revealed that this compound exhibits not only a strong androgen receptor (AR) agonistic activity (EC(50)=9.2 nM) but also the highest selectivity in binding affinity to AR among the steroid hormone receptors. Furthermore, this compound showed a weak virilizing effect with retention of the desired anabolic effect as compared with DHT in vivo. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Two-part pricing structure in long-term gas sales contracts

    International Nuclear Information System (INIS)

    Slocum, J.C.; Lee, S.Y.

    1992-01-01

    Although the incremental electricity generation market has the potential to be a major growth area for natural gas demand in the U.S., it may never live up to such promise unless gas suppliers are more willing to enter into long-term gas sales agreements necessary to nurture this segment of the industry. The authors submit that producer reluctance to enter into such long-term sales agreements can be traced, at least in part to the differing contract price requirements between gas producers and buyers. This paper will address an evolving solution to this contracting dilemma - the development of a two-part pricing structure for the gas commodity. A two-part pricing structure includes a usage or throughput charge established in a way to yield a marginal gas cost competitive with electric utility avoided costs, and a reservation charge established to guarantee a minimum cash flow to the producer. Moreover, the combined effect of the two charges may yield total revenues that better reflect the producer's replacement cost of the reserves committed under the contract. 2 tabs

  19. Joint two-part Tobit models for longitudinal and time-to-event data.

    Science.gov (United States)

    Dagne, Getachew A

    2017-11-20

    In this article, we show how Tobit models can address problems of identifying characteristics of subjects having left-censored outcomes in the context of developing a method for jointly analyzing time-to-event and longitudinal data. There are some methods for handling these types of data separately, but they may not be appropriate when time to event is dependent on the longitudinal outcome, and a substantial portion of values are reported to be below the limits of detection. An alternative approach is to develop a joint model for the time-to-event outcome and a two-part longitudinal outcome, linking them through random effects. This proposed approach is implemented to assess the association between the risk of decline of CD4/CD8 ratio and rates of change in viral load, along with discriminating between patients who are potentially progressors to AIDS from patients who do not. We develop a fully Bayesian approach for fitting joint two-part Tobit models and illustrate the proposed methods on simulated and real data from an AIDS clinical study. Copyright © 2017 John Wiley & Sons, Ltd.

  20. case series

    African Journals Online (AJOL)

    Administrator

    Key words: Case report, case series, concept analysis, research design. African Health Sciences 2012; (4): 557 - 562 http://dx.doi.org/10.4314/ahs.v12i4.25. PO Box 17666 .... According to the latest version of the Dictionary of. Epidemiology ...

  1. Development of the two-part pattern during regeneration of the head in hydra

    DEFF Research Database (Denmark)

    Bode, Matthias; Awad, T A; Koizumi, O

    1988-01-01

    The head of a hydra is composed of two parts, a domed hypostome with a mouth at the top and a ring of tentacles below. When animals are decapitated a new head regenerates. During the process of regeneration the apical tip passes through a transient stage in which it exhibits tentacle......-like characteristics before becoming a hypostome. This was determined from markers which appeared before morphogenesis took place. The first was a monoclonal antibody, TS-19, that specifically binds to the ectodermal epithelial cells of the tentacles. The second was an antiserum against the peptide Arg......-Phe-amide (RFamide), which in the head of hydra is specific to the sensory cells of the hypostomal apex and the ganglion cells of the lower hypostome and tentacles. The TS-19 expression and the ganglion cells with RFamide-like immunoreactivity (RLI) arose first at the apex and spread radially. Once the tentacles...

  2. 77 FR 64029 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Design Dive Speed

    Science.gov (United States)

    2012-10-18

    ... after operation of high-speed warning system by application of a load of 1.5g (0.5 acceleration... Series Airplanes; Design Dive Speed AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... airplanes. These design features include a high-speed protection system. The applicable airworthiness...

  3. Evaluation of a clinical decision support tool for osteoporosis disease management: protocol for an interrupted time series design.

    Science.gov (United States)

    Kastner, Monika; Sawka, Anna; Thorpe, Kevin; Chignel, Mark; Marquez, Christine; Newton, David; Straus, Sharon E

    2011-07-22

    Osteoporosis affects over 200 million people worldwide at a high cost to healthcare systems. Although guidelines on assessing and managing osteoporosis are available, many patients are not receiving appropriate diagnostic testing or treatment. Findings from a systematic review of osteoporosis interventions, a series of mixed-methods studies, and advice from experts in osteoporosis and human-factors engineering were used collectively to develop a multicomponent tool (targeted to family physicians and patients at risk for osteoporosis) that may support clinical decision making in osteoporosis disease management at the point of care. A three-phased approach will be used to evaluate the osteoporosis tool. In phase 1, the tool will be implemented in three family practices. It will involve ensuring optimal functioning of the tool while minimizing disruption to usual practice. In phase 2, the tool will be pilot tested in a quasi-experimental interrupted time series (ITS) design to determine if it can improve osteoporosis disease management at the point of care. Phase 3 will involve conducting a qualitative postintervention follow-up study to better understand participants' experiences and perceived utility of the tool and readiness to adopt the tool at the point of care. The osteoporosis tool has the potential to make several contributions to the development and evaluation of complex, chronic disease interventions, such as the inclusion of an implementation strategy prior to conducting an evaluation study. Anticipated benefits of the tool may be to increase awareness for patients about osteoporosis and its associated risks and provide an opportunity to discuss a management plan with their physician, which may all facilitate patient self-management.

  4. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific Design Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Muralidharan, G.; Sikka, V.K.; Pankiw, R.I.

    2006-04-15

    The goal of this program was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and upper use temperature by 86 to 140 F (30 to 60 C). Meeting this goal is expected to result in energy savings of 38 trillion Btu/year by 2020 and energy cost savings of $185 million/year. The higher strength H-Series of cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat-treating industry. The project was led by Duraloy Technologies, Inc. with research participation by the Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies. Energy Industries of Ohio (EIO) was also a partner in this project. Each team partner had well-defined roles. Duraloy Technologies led the team by identifying the base alloys that were to be improved from this research. Duraloy Technologies also provided an extensive creep data base on current alloys, provided creep-tested specimens of certain commercial alloys, and carried out centrifugal casting and component fabrication of newly designed alloys. Nucor Steel was the first partner company that installed the radiant burner tube assembly in their heat-treating furnace. Other steel companies participated in project review meetings and are currently working with Duraloy Technologies to obtain components of the new alloys. EIO is promoting the enhanced performance of the newly designed alloys to Ohio-based companies. The Timken Company is one of the Ohio companies being promoted by EIO. The project management and coordination plan is shown in Fig. 1.1. A related project at University of Texas-Arlington (UT-A) is described in Development of Semi-Stochastic Algorithm for Optimizing Alloy Composition of High-Temperature Austenitic Stainless Steels (H-Series) for Desired

  5. Fundamentals of piping design

    CERN Document Server

    Smith, Peter

    2013-01-01

    Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

  6. The impact of public transportation strikes on use of a bicycle share program in London: interrupted time series design.

    Science.gov (United States)

    Fuller, Daniel; Sahlqvist, Shannon; Cummins, Steven; Ogilvie, David

    2012-01-01

    To investigate the immediate and sustained effects of two London Underground strikes on use of a public bicycle share program. An interrupted time series design was used to examine the impact of two 24 hour strikes on the total number of trips per day and mean trip duration per day on the London public bicycle share program. The strikes occurred on September 6th and October 4th 2010 and limited service on the London Underground. The mean total number of trips per day over the whole study period was 14,699 (SD=5390) while the mean trip duration was 18.5 minutes (SD=3.7). Significant increases in daily trip count were observed following strike 1 (3864: 95% CI 125 to 7604) and strike 2 (11,293: 95% CI 5169 to 17,416). Events that greatly constrain the primary motorised mode of transportation for a population may have unintended short-term effects on travel behaviour. These findings suggest that limiting transportation options may have the potential to increase population levels of physical activity by promoting the use of cycling. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. Multivariate two-part statistics for analysis of correlated mass spectrometry data from multiple biological specimens.

    Science.gov (United States)

    Taylor, Sandra L; Ruhaak, L Renee; Weiss, Robert H; Kelly, Karen; Kim, Kyoungmi

    2017-01-01

    High through-put mass spectrometry (MS) is now being used to profile small molecular compounds across multiple biological sample types from the same subjects with the goal of leveraging information across biospecimens. Multivariate statistical methods that combine information from all biospecimens could be more powerful than the usual univariate analyses. However, missing values are common in MS data and imputation can impact between-biospecimen correlation and multivariate analysis results. We propose two multivariate two-part statistics that accommodate missing values and combine data from all biospecimens to identify differentially regulated compounds. Statistical significance is determined using a multivariate permutation null distribution. Relative to univariate tests, the multivariate procedures detected more significant compounds in three biological datasets. In a simulation study, we showed that multi-biospecimen testing procedures were more powerful than single-biospecimen methods when compounds are differentially regulated in multiple biospecimens but univariate methods can be more powerful if compounds are differentially regulated in only one biospecimen. We provide R functions to implement and illustrate our method as supplementary information CONTACT: sltaylor@ucdavis.eduSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  8. What's in a Name? The Incorrect Use of Case Series as a Study Design Label in Studies Involving Dogs and Cats.

    Science.gov (United States)

    Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A

    2017-07-01

    Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

  9. Dynamic modeling and simulation of an induction motor with adaptive backstepping design of an input-output feedback linearization controller in series hybrid electric vehicle

    Directory of Open Access Journals (Sweden)

    Jalalifar Mehran

    2007-01-01

    Full Text Available In this paper using adaptive backstepping approach an adaptive rotor flux observer which provides stator and rotor resistances estimation simultaneously for induction motor used in series hybrid electric vehicle is proposed. The controller of induction motor (IM is designed based on input-output feedback linearization technique. Combining this controller with adaptive backstepping observer the system is robust against rotor and stator resistances uncertainties. In additional, mechanical components of a hybrid electric vehicle are called from the Advanced Vehicle Simulator Software Library and then linked with the electric motor. Finally, a typical series hybrid electric vehicle is modeled and investigated. Various tests, such as acceleration traversing ramp, and fuel consumption and emission are performed on the proposed model of a series hybrid vehicle. Computer simulation results obtained, confirm the validity and performance of the proposed IM control approach using for series hybrid electric vehicle.

  10. Design of a New Concentration Series for the Orthogonal Sample Design Approach and Estimation of the Number of Reactions in Chemical Systems.

    Science.gov (United States)

    Shi, Jiajia; Liu, Yuhai; Guo, Ran; Li, Xiaopei; He, Anqi; Gao, Yunlong; Wei, Yongju; Liu, Cuige; Zhao, Ying; Xu, Yizhuang; Noda, Isao; Wu, Jinguang

    2015-11-01

    A new concentration series is proposed for the construction of a two-dimensional (2D) synchronous spectrum for orthogonal sample design analysis to probe intermolecular interaction between solutes dissolved in the same solutions. The obtained 2D synchronous spectrum possesses the following two properties: (1) cross peaks in the 2D synchronous spectra can be used to reflect intermolecular interaction reliably, since interference portions that have nothing to do with intermolecular interaction are completely removed, and (2) the two-dimensional synchronous spectrum produced can effectively avoid accidental collinearity. Hence, the correct number of nonzero eigenvalues can be obtained so that the number of chemical reactions can be estimated. In a real chemical system, noise present in one-dimensional spectra may also produce nonzero eigenvalues. To get the correct number of chemical reactions, we classified nonzero eigenvalues into significant nonzero eigenvalues and insignificant nonzero eigenvalues. Significant nonzero eigenvalues can be identified by inspecting the pattern of the corresponding eigenvector with help of the Durbin-Watson statistic. As a result, the correct number of chemical reactions can be obtained from significant nonzero eigenvalues. This approach provides a solid basis to obtain insight into subtle spectral variations caused by intermolecular interaction.

  11. Changing use of surgical antibiotic prophylaxis in Thika Hospital, Kenya: a quality improvement intervention with an interrupted time series design.

    Directory of Open Access Journals (Sweden)

    Alexander M Aiken

    Full Text Available In low-income countries, Surgical Site Infection (SSI is a common form of hospital-acquired infection. Antibiotic prophylaxis is an effective method of preventing these infections, if given immediately before the start of surgery. Although several studies in Africa have compared pre-operative versus post-operative prophylaxis, there are no studies describing the implementation of policies to improve prescribing of surgical antibiotic prophylaxis in African hospitals.We conducted SSI surveillance at a typical Government hospital in Kenya over a 16 month period between August 2010 and December 2011, using standard definitions of SSI and the extent of contamination of surgical wounds. As an intervention, we developed a hospital policy that advised pre-operative antibiotic prophylaxis and discouraged extended post-operative antibiotics use. We measured process, outcome and balancing effects of this intervention in using an interrupted time series design.From a starting point of near-exclusive post-operative antibiotic use, after policy introduction in February 2011 there was rapid adoption of the use of pre-operative antibiotic prophylaxis (60% of operations at 1 week; 98% at 6 weeks and a substantial decrease in the use of post-operative antibiotics (40% of operations at 1 week; 10% at 6 weeks in Clean and Clean-Contaminated surgery. There was no immediate step-change in risk of SSI, but overall, there appeared to be a moderate reduction in the risk of superficial SSI across all levels of wound contamination. There were marked reductions in the costs associated with antibiotic use, the number of intravenous injections performed and nursing time spent administering these.Implementation of a locally developed policy regarding surgical antibiotic prophylaxis is an achievable quality improvement target for hospitals in low-income countries, and can lead to substantial benefits for individual patients and the institution.

  12. Changing use of surgical antibiotic prophylaxis in Thika Hospital, Kenya: a quality improvement intervention with an interrupted time series design.

    Science.gov (United States)

    Aiken, Alexander M; Wanyoro, Anthony K; Mwangi, Jonah; Juma, Francis; Mugoya, Isaac K; Scott, J Anthony G

    2013-01-01

    In low-income countries, Surgical Site Infection (SSI) is a common form of hospital-acquired infection. Antibiotic prophylaxis is an effective method of preventing these infections, if given immediately before the start of surgery. Although several studies in Africa have compared pre-operative versus post-operative prophylaxis, there are no studies describing the implementation of policies to improve prescribing of surgical antibiotic prophylaxis in African hospitals. We conducted SSI surveillance at a typical Government hospital in Kenya over a 16 month period between August 2010 and December 2011, using standard definitions of SSI and the extent of contamination of surgical wounds. As an intervention, we developed a hospital policy that advised pre-operative antibiotic prophylaxis and discouraged extended post-operative antibiotics use. We measured process, outcome and balancing effects of this intervention in using an interrupted time series design. From a starting point of near-exclusive post-operative antibiotic use, after policy introduction in February 2011 there was rapid adoption of the use of pre-operative antibiotic prophylaxis (60% of operations at 1 week; 98% at 6 weeks) and a substantial decrease in the use of post-operative antibiotics (40% of operations at 1 week; 10% at 6 weeks) in Clean and Clean-Contaminated surgery. There was no immediate step-change in risk of SSI, but overall, there appeared to be a moderate reduction in the risk of superficial SSI across all levels of wound contamination. There were marked reductions in the costs associated with antibiotic use, the number of intravenous injections performed and nursing time spent administering these. Implementation of a locally developed policy regarding surgical antibiotic prophylaxis is an achievable quality improvement target for hospitals in low-income countries, and can lead to substantial benefits for individual patients and the institution.

  13. Systematic staging design applied to the fixed-bed reactor series for methanol and one-step methanol/dimethyl ether synthesis

    International Nuclear Information System (INIS)

    Manenti, Flavio; Leon-Garzon, Andres R.; Ravaghi-Ardebili, Zohreh; Pirola, Carlo

    2014-01-01

    This work investigates possible design advances in the series of fixed-bed reactors for methanol and dimethyl ether synthesis. Specifically, the systematic staging design proposed by Hillestad [1] is applied to the water-cooled and gas-cooled series of reactors of Lurgi's technology. The procedure leads to new design and operating conditions with respect to the current best industrial practice, with relevant benefits in terms of process yield, energy saving, and net income. The overall mathematical model for the process simulation and optimization is reported in the work together with dedicated sensitivity analysis studies. - Highlights: • Systematic staging design is applied to methanol and methanol/DME synthesis. • New configurations for the synthesis reactor network are proposed and assessed. • Comparison with the industrial best practice is provided. • Energy-process optimization is performed to improve the overall yield of the process

  14. Computational design of new molecular scaffolds for medicinal chemistry, part II: generalization of analog series-based scaffolds

    Science.gov (United States)

    Dimova, Dilyana; Stumpfe, Dagmar; Bajorath, Jürgen

    2018-01-01

    Aim: Extending and generalizing the computational concept of analog series-based (ASB) scaffolds. Materials & methods: Methodological modifications were introduced to further increase the coverage of analog series (ASs) and compounds by ASB scaffolds. From bioactive compounds, ASs were systematically extracted and second-generation ASB scaffolds isolated. Results: More than 20,000 second-generation ASB scaffolds with single or multiple substitution sites were extracted from active compounds, achieving more than 90% coverage of ASs. Conclusion: Generalization of the ASB scaffold approach has yielded a large knowledge base of scaffold-capturing compound series and target information. PMID:29379641

  15. Primer to Design Safe School Projects in Case of Terrorist Attacks and School Shootings. Buildings and Infrastructure Protection Series. FEMA-428/BIPS-07/January 2012. Edition 2

    Science.gov (United States)

    Chipley, Michael; Lyon, Wesley; Smilowitz, Robert; Williams, Pax; Arnold, Christopher; Blewett, William; Hazen, Lee; Krimgold, Fred

    2012-01-01

    This publication, part of the new Building and Infrastructure Protection Series (BIPS) published by the Department of Homeland Security (DHS) Science and Technology Directorate (S&T) Infrastructure Protection and Disaster Management Division (IDD), serves to advance high performance and integrated design for buildings and infrastructure. This…

  16. Evolution of the Instructional Design in a Series of Online Workshops | L’évolution d’un design pédagogique dans le développement d’ateliers en ligne

    Directory of Open Access Journals (Sweden)

    Anne Patry

    2015-11-01

    Full Text Available This case recounts the story of the design and production of a series of online workshops for French-speaking healthcare professionals in Canada. The project spans a couple of years and, despite encountering some challenges, succeeds in large part because of its strong foundation: the instructional design. This case study features an instructional designer from a central Canadian university and three SMEs. The main design issues highlighted are the target population’s limited availability for continuing education, the SME’s lack of knowledge of the instructional design process, the magnitude of this project with its national scope but limited time frame and human resources, as well as personnel changes among the SMEs and the instructional design team. This case outlines how the project team deals with these challenges to produce a series of online workshops that provide high quality training in French to healthcare professionals across Canada.

  17. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific and Design Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Pankiw, Roman I; Muralidharan, G. (Murali); Sikka, Vinod K.

    2006-06-30

    The goal of this project was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and the upper use temperature by 86 to 140 degrees fahrenheit (30 to 60 degrees celsius). Meeting this goal is expected to result in energy savings of 35 trillion Btu/year by 2020 and energy cost savings of approximately $230 million/year. The higher-strength H-Series cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat treating industry, including radiant burner tubes. The project was led by Duraloy Technologies, Inc., with research participation by Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies.

  18. Fourier series

    CERN Document Server

    Tolstov, Georgi P

    1962-01-01

    Richard A. Silverman's series of translations of outstanding Russian textbooks and monographs is well-known to people in the fields of mathematics, physics, and engineering. The present book is another excellent text from this series, a valuable addition to the English-language literature on Fourier series.This edition is organized into nine well-defined chapters: Trigonometric Fourier Series, Orthogonal Systems, Convergence of Trigonometric Fourier Series, Trigonometric Series with Decreasing Coefficients, Operations on Fourier Series, Summation of Trigonometric Fourier Series, Double Fourie

  19. Inclusion of mobile telephone numbers into an ongoing population health survey in New South Wales, Australia, using an overlapping dual-frame design: impact on the time series.

    Science.gov (United States)

    Barr, Margo L; Ferguson, Raymond A; Steel, David G

    2014-08-12

    Since 1997, the NSW Population Health Survey (NSWPHS) had selected the sample using random digit dialing of landline telephone numbers. When the survey began coverage of the population by landline phone frames was high (96%). As landline coverage in Australia has declined and continues to do so, in 2012, a sample of mobile telephone numbers was added to the survey using an overlapping dual-frame design. Details of the methodology are published elsewhere. This paper discusses the impacts of the sampling frame change on the time series, and provides possible approaches to handling these impacts. Prevalence estimates were calculated for type of phone-use, and a range of health indicators. Prevalence ratios (PR) for each of the health indicators were also calculated using Poisson regression analysis with robust variance estimation by type of phone-use. Health estimates for 2012 were compared to 2011. The full time series was examined for selected health indicators. It was estimated from the 2012 NSWPHS that 20.0% of the NSW population were mobile-only phone users. Looking at the full time series for overweight or obese and current smoking if the NSWPHS had continued to be undertaken only using a landline frame, overweight or obese would have been shown to continue to increase and current smoking would have been shown to continue to decrease. However, with the introduction of the overlapping dual-frame design in 2012, overweight or obese increased until 2011 and then decreased in 2012, and current smoking decreased until 2011, and then increased in 2012. Our examination of these time series showed that the changes were a consequence of the sampling frame change and were not real changes. Both the backcasting method and the minimal coverage method could adequately adjust for the design change and allow for the continuation of the time series. The inclusion of the mobile telephone numbers, through an overlapping dual-frame design, did impact on the time series for some of

  20. Design and test of a 40-kV, 80-A, 10-msec, neutral-beam power supply series

    International Nuclear Information System (INIS)

    North, G.G.

    1977-01-01

    To meet neutral-beam source requirements, a combination series switch/regulator system has been developed that can provide up to 40-kV at 80A output for 10-ms from the continuously decaying voltage of a charged capacitor bank. The system uses 100% feedback control of a series hard tube regulator. This feedback regulator is able to maintain a 40-kV output level for 100% load variations while the source voltage for the capacitor bank is drained from an initial 55-kV down to as low as 43-kV during a 10-ms pulse. In addition to controlling the output voltage, the series regulator tube also serves the dual role of a disconnect or interrupt switch at the end of each pulse and during the frequent occurrence of a neutral-beam source fault. In the interrupt mode, complete disconnect is achieved in less than 2-μs after first observance of a fault condition; recovery times to normal operation of less than 10-μs after fault clearance can be attained if desired

  1. Multi-load Optimal Design of Burner-inner-liner Under Performance Index Constraint by Second-Order Polynomial Taylor Series Method

    Directory of Open Access Journals (Sweden)

    Tu Gaoqiao

    2016-01-01

    Full Text Available Using maximum expansion pressure of n-decane, the aeroengine burner-inner-liner combustion pressure load is computed. Aerodynamic loads are obtained from internal gas pressure load and gas momentum. Multi-load second-order Taylor series equations are established using multi-variant polynomials and their sensitivities. Optimal designs are carried out using various performance index constraints. When 0.25 to 0.8 rectifications of different design variants are implemented, they converge under 5×10‒4 d-norm difference ratio.

  2. Decision-theoretic designs for a series of trials with correlated treatment effects using the Sarmanov multivariate beta-binomial distribution.

    Science.gov (United States)

    Hee, Siew Wan; Parsons, Nicholas; Stallard, Nigel

    2018-03-01

    The motivation for the work in this article is the setting in which a number of treatments are available for evaluation in phase II clinical trials and where it may be infeasible to try them concurrently because the intended population is small. This paper introduces an extension of previous work on decision-theoretic designs for a series of phase II trials. The program encompasses a series of sequential phase II trials with interim decision making and a single two-arm phase III trial. The design is based on a hybrid approach where the final analysis of the phase III data is based on a classical frequentist hypothesis test, whereas the trials are designed using a Bayesian decision-theoretic approach in which the unknown treatment effect is assumed to follow a known prior distribution. In addition, as treatments are intended for the same population it is not unrealistic to consider treatment effects to be correlated. Thus, the prior distribution will reflect this. Data from a randomized trial of severe arthritis of the hip are used to test the application of the design. We show that the design on average requires fewer patients in phase II than when the correlation is ignored. Correspondingly, the time required to recommend an efficacious treatment for phase III is quicker. © 2017 The Author. Biometrical Journal published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Case Series.

    Science.gov (United States)

    Vetrayan, Jayachandran; Othman, Suhana; Victor Paulraj, Smily Jesu Priya

    2017-01-01

    To assess the effectiveness and feasibility of behavioral sleep intervention for medicated children with ADHD. Six medicated children (five boys, one girl; aged 6-12 years) with ADHD participated in a 4-week sleep intervention program. The main behavioral strategies used were Faded Bedtime With Response Cost (FBRC) and positive reinforcement. Within a case-series design, objective measure (Sleep Disturbance Scale for Children [SDSC]) and subjective measure (sleep diaries) were used to record changes in children's sleep. For all six children, significant decrease was found in the severity of children's sleep problems (based on SDSC data). Bedtime resistance and mean sleep onset latency were reduced following the 4-week intervention program according to sleep diaries data. Gains were generally maintained at the follow-up. Parents perceived the intervention as being helpful. Based on the initial data, this intervention shows promise as an effective and feasible treatment.

  4. Two-part zero-inflated negative binomial regression model for quantitative trait loci mapping with count trait.

    Science.gov (United States)

    Moghimbeigi, Abbas

    2015-05-07

    Poisson regression models provide a standard framework for quantitative trait locus (QTL) mapping of count traits. In practice, however, count traits are often over-dispersed relative to the Poisson distribution. In these situations, the zero-inflated Poisson (ZIP), zero-inflated generalized Poisson (ZIGP) and zero-inflated negative binomial (ZINB) regression may be useful for QTL mapping of count traits. Added genetic variables to the negative binomial part equation, may also affect extra zero data. In this study, to overcome these challenges, I apply two-part ZINB model. The EM algorithm with Newton-Raphson method in the M-step uses for estimating parameters. An application of the two-part ZINB model for QTL mapping is considered to detect associations between the formation of gallstone and the genotype of markers. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Game Plan: In Part One of This Two-Part Series, Technology & Learning Looks at the Challenges of Using Games to Teach

    Science.gov (United States)

    McLester, Susan

    2005-01-01

    When one considers it was only 10 or so years ago that some experts were questioning the appropriateness of multimedia and other "frills" as learning tools, it's not surprising that the idea of using games as a core instructional resource remains controversial. But in an age in which major corporations and the U.S. military are relying on…

  6. CO-Ordinated Action Design of Rheostatic and Air Brakes on the Electric Railcar Series 6 111

    Directory of Open Access Journals (Sweden)

    Josip Zavada

    2012-10-01

    Full Text Available The paper presents the solution for the modification of thebrakes on the electric railcar series 6111 used in suburban traffic.It also gives the results of the performed measurements aswell as their analysis.The mentioned electric railcar is fitted with air and rheostaticbrakes whose activation is mutually independent. Sincesuburban traffic means frequent slopping, and since the enginedriver does not use the rheostatic brake regularly, but only theair brake, the wear of the brake lining and wheels is higher, andthe heat load on the brake elements is substantial. By regularapplication of rheostatic brake, the air brake could be LLSed lessthus contributing to a lower wear of the friction elements.The presented solution for the modification of the brakeconsists of co-ordinated and automatic action of the rheostaticand air brake with every braking

  7. ACT-CCREC Core Research Program: Study Questions and Design. ACT Working Paper Series. WP-2015-01

    Science.gov (United States)

    Cruce, Ty M.

    2015-01-01

    This report provides a non-technical overview of the guiding research questions and research design for the ACT-led core research program conducted on behalf of the GEAR UP College and Career Readiness Evaluation Consortium (CCREC). The core research program is a longitudinal study of the effectiveness of 14 GEAR UP state grants on the academic…

  8. Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

    Science.gov (United States)

    Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

    2012-01-01

    Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

  9. Series Transmission Line Transformer

    Science.gov (United States)

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  10. Frequency domain analysis and design of nonlinear systems based on Volterra series expansion a parametric characteristic approach

    CERN Document Server

    Jing, Xingjian

    2015-01-01

    This book is a systematic summary of some new advances in the area of nonlinear analysis and design in the frequency domain, focusing on the application oriented theory and methods based on the GFRF concept, which is mainly done by the author in the past 8 years. The main results are formulated uniformly with a parametric characteristic approach, which provides a convenient and novel insight into nonlinear influence on system output response in terms of characteristic parameters and thus facilitate nonlinear analysis and design in the frequency domain.  The book starts with a brief introduction to the background of nonlinear analysis in the frequency domain, followed by recursive algorithms for computation of GFRFs for different parametric models, and nonlinear output frequency properties. Thereafter the parametric characteristic analysis method is introduced, which leads to the new understanding and formulation of the GFRFs, and nonlinear characteristic output spectrum (nCOS) and the nCOS based analysis a...

  11. Design and development of repetitive capacitor charging power supply based on series-parallel resonant converter topology.

    Science.gov (United States)

    Patel, Ankur; Nagesh, K V; Kolge, Tanmay; Chakravarthy, D P

    2011-04-01

    LCL resonant converter based repetitive capacitor charging power supply (CCPS) is designed and developed in the division. The LCL converter acts as a constant current source when switching frequency is equal to the resonant frequency. When both resonant inductors' values of LCL converter are same, it results in inherent zero current switching (ZCS) in switches. In this paper, ac analysis with fundamental frequency approximation of LCL resonant tank circuit, frequency dependent of current gain converter followed by design, development, simulation, and practical result is described. Effect of change in switching frequency and resonant frequency and change in resonant inductors ratio on CCPS will be discussed. An efficient CCPS of average output power of 1.2 kJ/s, output voltage 3 kV, and 300 Hz repetition rate is developed in the division. The performance of this CCPS has been evaluated in the laboratory by charging several values of load capacitance at various repetition rates. These results indicate that this design is very feasible for use in capacitor-charging applications. © 2011 American Institute of Physics

  12. Infinite series

    CERN Document Server

    Hirschman, Isidore Isaac

    2014-01-01

    This text for advanced undergraduate and graduate students presents a rigorous approach that also emphasizes applications. Encompassing more than the usual amount of material on the problems of computation with series, the treatment offers many applications, including those related to the theory of special functions. Numerous problems appear throughout the book.The first chapter introduces the elementary theory of infinite series, followed by a relatively complete exposition of the basic properties of Taylor series and Fourier series. Additional subjects include series of functions and the app

  13. Bayesian inference for two-part mixed-effects model using skew distributions, with application to longitudinal semicontinuous alcohol data.

    Science.gov (United States)

    Xing, Dongyuan; Huang, Yangxin; Chen, Henian; Zhu, Yiliang; Dagne, Getachew A; Baldwin, Julie

    2017-08-01

    Semicontinuous data featured with an excessive proportion of zeros and right-skewed continuous positive values arise frequently in practice. One example would be the substance abuse/dependence symptoms data for which a substantial proportion of subjects investigated may report zero. Two-part mixed-effects models have been developed to analyze repeated measures of semicontinuous data from longitudinal studies. In this paper, we propose a flexible two-part mixed-effects model with skew distributions for correlated semicontinuous alcohol data under the framework of a Bayesian approach. The proposed model specification consists of two mixed-effects models linked by the correlated random effects: (i) a model on the occurrence of positive values using a generalized logistic mixed-effects model (Part I); and (ii) a model on the intensity of positive values using a linear mixed-effects model where the model errors follow skew distributions including skew- t and skew-normal distributions (Part II). The proposed method is illustrated with an alcohol abuse/dependence symptoms data from a longitudinal observational study, and the analytic results are reported by comparing potential models under different random-effects structures. Simulation studies are conducted to assess the performance of the proposed models and method.

  14. Bias correction of risk estimates in vaccine safety studies with rare adverse events using a self-controlled case series design.

    Science.gov (United States)

    Zeng, Chan; Newcomer, Sophia R; Glanz, Jason M; Shoup, Jo Ann; Daley, Matthew F; Hambidge, Simon J; Xu, Stanley

    2013-12-15

    The self-controlled case series (SCCS) method is often used to examine the temporal association between vaccination and adverse events using only data from patients who experienced such events. Conditional Poisson regression models are used to estimate incidence rate ratios, and these models perform well with large or medium-sized case samples. However, in some vaccine safety studies, the adverse events studied are rare and the maximum likelihood estimates may be biased. Several bias correction methods have been examined in case-control studies using conditional logistic regression, but none of these methods have been evaluated in studies using the SCCS design. In this study, we used simulations to evaluate 2 bias correction approaches-the Firth penalized maximum likelihood method and Cordeiro and McCullagh's bias reduction after maximum likelihood estimation-with small sample sizes in studies using the SCCS design. The simulations showed that the bias under the SCCS design with a small number of cases can be large and is also sensitive to a short risk period. The Firth correction method provides finite and less biased estimates than the maximum likelihood method and Cordeiro and McCullagh's method. However, limitations still exist when the risk period in the SCCS design is short relative to the entire observation period.

  15. Test and evaluation of the Argonne BPAC10 Series air chamber calorimeter designed for 20 minute measurements

    International Nuclear Information System (INIS)

    Perry, R.B.; Fiarman, S.; Jung, E.A.; Cremers, T.

    1990-10-01

    This paper is the final report on DOE-OSS Task ANLE88002 ''Fast Air Chamber Calorimetry.'' The task objective was to design, construct, and test an isothermal air chamber calorimeter for plutonium assay of bulk samples that would meet the following requirements for sample power measurement: average sample measurement time less than 20 minutes. Measurement of samples with power output up to 10 W. Precision of better than 1% RSD for sample power greater than 1 W. Precision better than 0.010 watt SD, for sample power less than 1 W. This report gives a description of the calorimeter hardware and software and discusses the test results. The instrument operating procedure, included as an appendix, gives examples of typical input/output and explains the menu driven software. Sample measurement time of less than 20 minutes was attained by pre-equilibration of the samples in low cost precision preheaters and by prediction of equilibrium measurements. Tests at the TA55 Plutonium Facility at Los Alamos National Laboratory, on typical samples, indicates that the instrument meets all the measurement requirements

  16. Quasi-experimental study designs series-paper 8: identifying quasi-experimental studies to inform systematic reviews.

    Science.gov (United States)

    Glanville, Julie; Eyers, John; Jones, Andrew M; Shemilt, Ian; Wang, Grace; Johansen, Marit; Fiander, Michelle; Rothstein, Hannah

    2017-09-01

    This article reviews the available evidence and guidance on methods to identify reports of quasi-experimental (QE) studies to inform systematic reviews of health care, public health, international development, education, crime and justice, and social welfare. Research, guidance, and examples of search strategies were identified by searching a range of databases, key guidance documents, selected reviews, conference proceedings, and personal communication. Current practice and research evidence were summarized. Four thousand nine hundred twenty-four records were retrieved by database searches, and additional documents were obtained by other searches. QE studies are challenging to identify efficiently because they have no standardized nomenclature and may be indexed in various ways. Reliable search filters are not available. There is a lack of specific resources devoted to collecting QE studies and little evidence on where best to search. Searches to identify QE studies should search a range of resources and, until indexing improves, use strategies that focus on the topic rather than the study design. Better definitions, better indexing in databases, prospective registers, and reporting guidance are required to improve the retrieval of QE studies and promote systematic reviews of what works based on the evidence from such studies. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Bandwidth based methodology for designing a hybrid energy storage system for a series hybrid electric vehicle with limited all electric mode

    Science.gov (United States)

    Shahverdi, Masood

    The cost and fuel economy of hybrid electrical vehicles (HEVs) are significantly dependent on the power-train energy storage system (ESS). A series HEV with a minimal all-electric mode (AEM) permits minimizing the size and cost of the ESS. This manuscript, pursuing the minimal size tactic, introduces a bandwidth based methodology for designing an efficient ESS. First, for a mid-size reference vehicle, a parametric study is carried out over various minimal-size ESSs, both hybrid (HESS) and non-hybrid (ESS), for finding the highest fuel economy. The results show that a specific type of high power battery with 4.5 kWh capacity can be selected as the winning candidate to study for further minimization. In a second study, following the twin goals of maximizing Fuel Economy (FE) and improving consumer acceptance, a sports car class Series-HEV (SHEV) was considered as a potential application which requires even more ESS minimization. The challenge with this vehicle is to reduce the ESS size compared to 4.5 kWh, because the available space allocation is only one fourth of the allowed battery size in the mid-size study by volume. Therefore, an advanced bandwidth-based controller is developed that allows a hybridized Subaru BRZ model to be realized with a light ESS. The result allows a SHEV to be realized with 1.13 kWh ESS capacity. In a third study, the objective is to find optimum SHEV designs with minimal AEM assumption which cover the design space between the fuel economies in the mid-size car study and the sports car study. Maximizing FE while minimizing ESS cost is more aligned with customer acceptance in the current state of market. The techniques applied to manage the power flow between energy sources of the power-train significantly affect the results of this optimization. A Pareto Frontier, including ESS cost and FE, for a SHEV with limited AEM, is introduced using an advanced bandwidth-based control strategy teamed up with duty ratio control. This controller

  18. Non-random temporary emigration and the robust design: Conditions for bias at the end of a time series: Section VIII

    Science.gov (United States)

    Langtimm, Catherine A.

    2008-01-01

    Deviations from model assumptions in the application of capture–recapture models to real life situations can introduce unknown bias. Understanding the type and magnitude of bias under these conditions is important to interpreting model results. In a robust design analysis of long-term photo-documented sighting histories of the endangered Florida manatee, I found high survival rates, high rates of non-random temporary emigration, significant time-dependence, and a diversity of factors affecting temporary emigration that made it difficult to model emigration in any meaningful fashion. Examination of the time-dependent survival estimates indicated a suspicious drop in survival rates near the end of the time series that persisted when the original capture histories were truncated and reanalyzed under a shorter time frame. Given the wide swings in manatee emigration estimates from year to year, a likely source of bias in survival was the convention to resolve confounding of the last survival probability in a time-dependent model with the last emigration probabilities by setting the last unmeasurable emigration probability equal to the previous year’s probability when the equality was actually false. Results of a series of simulations demonstrated that if the unmeasurable temporary emigration probabilities in the last time period were not accurately modeled, an estimation model with significant annual variation in survival probabilities and emigration probabilities produced bias in survival estimates at the end of the study or time series being explored. Furthermore, the bias propagated back in time beyond the last two time periods and the number of years affected varied positively with survival and emigration probabilities. Truncating the data to a shorter time frame and reanalyzing demonstrated that with additional years of data surviving temporary emigrants eventually return and are detected, thus in subsequent analysis unbiased estimates are eventually realized.

  19. Design and optimization of a series of 1-sulfonylpyrazolo[4,3-b]pyridines as selective c-Met inhibitors.

    Science.gov (United States)

    Ma, Yuchi; Sun, Guangqiang; Chen, Danqi; Peng, Xia; Chen, Yue-Lei; Su, Yi; Ji, Yinchun; Liang, Jin; Wang, Xin; Chen, Lin; Ding, Jian; Xiong, Bing; Ai, Jing; Geng, Meiyu; Shen, Jingkang

    2015-03-12

    c-Met has emerged as an attractive target for targeted cancer therapy because of its abnormal activation in many cancer cells. To identify high potent and selective c-Met inhibitors, we started with profiling the potency and in vitro metabolic stability of a reported hit 7. By rational design, a novel sulfonylpyrazolo[4,3-b]pyridine 9 with improved DMPK properties was discovered. Further elaboration of π-π stacking interactions and solvent accessible polar moieties led to a series of highly potent and selective type I c-Met inhibitors. On the basis of in vitro and in vivo pharmacological and pharmacokinetics studies, compound 46 was selected as a preclinical candidate for further anticancer drug development.

  20. Pricing policies for a two-part exhaustible resource cartel: the case of OPEC (world oil project). Working paper

    Energy Technology Data Exchange (ETDEWEB)

    Hnyilicza, E.; Pindyck, R.S.

    1976-04-01

    This paper examines pricing policies for OPEC under the assumption that the cartel is composed of a block of spender countries with large cash needs and a block of saver countries with little immediate need for cash and a lower rate of discount. The decision problem for the two-part cartel is embodied in a game-theoretic framework and the optimal bargaining solution is computed using results from the theory of cooperative games developed by Nash. The set of feasible bargaining points--and the corresponding Nash solution--is computed under two assumptions on the behavior of output shares: that they are subject to choice and that they are fixed at historical values. The results suggest that for fixed output shares, there is little room for bargaining and the price path approximates the optimal monopoly price path. If the shares are subject to control, optimal paths depend significantly on the relative bargaining power of each block.

  1. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  2. Human permanent teeth are divided into two parts at the cemento-enamel junction in the divine golden ratio.

    Science.gov (United States)

    Anand, Rahul; Sarode, Sachin C; Sarode, Gargi S; Patil, Shankargouda

    2017-01-01

    The aim of this study is to find out whether tooth length (crown length + root length) follows the rule of most divine and mysterious phi (ϕ) or the golden ratio. A total of 140 teeth were included in the study. The crown-root ratio was manually calculated using vernier caliper and its approximation to golden ratio or the divine number phi (ϕ) was examined. The average root-crown ratio (R/C) for maxillary central incisor was 1.627 ± 0.04, and of its antagonist, mandibular central incisor was 1.628 ± 0.02. The tooth-root ratio (T/R) for the same was 1.609 ± 0.016 and 1.61 ± 0.008, respectively. Similar values were appreciated for lateral incisors where the R/C ratio in the maxillary and mandibular teeth was 1.632 ± 0.015 and 1.641 ± 0.012 and the T/R ratio was 1.606 ± 0.005 and 1.605 ± 0.005, respectively. On measuring the tooth length in linear fashion from the cusp tip to the root apex, we found that the tooth was divided into two parts at the cemento-enamel junction in the golden ratio. This information can be exploited in restorative and implant dentistry in future.

  3. Reverse Revenue Sharing Contract versus Two-Part Tariff Contract under a Closed-Loop Supply Chain System

    Directory of Open Access Journals (Sweden)

    Zunya Shi

    2016-01-01

    Full Text Available The importance of remanufacturing has been recognized in research and practice. The integrated system, combining the forward and reverse activities of supply chains, is called closed-loop supply chain (CLSC system. By coordination in the CLSC system, players will get economic improvement. This paper studies different coordination performances of two types of contracts, two-part tariff (TTC and reverse revenue sharing contract (RRSC, in a closed-loop system. Through mathematical analysis based on Stackelberg Game Theory, we find that it is easy for manufacturer to improve more profits and retailer’s collection effects by adjusting the ratio of transfer collection price through RRSC, and we also give the function to calculate the best ratio of transfer collection price, which may be a valuable reference for the decision maker in practice. Besides, our results also suggest that although the profits of the coordinated CLSC system are always higher than the contradictory scenario, the RRSC is more favorable to the manufacturer than to the retailer, as results show that the manufacturer will share more profits from the system through RRSC. Therefore, RRSC has attracted the manufacturers more to closing the supply chain for economic consideration.

  4. The U. S. transportation sector in the year 2030: results of a two-part Delphi survey.

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, G.; Stephens, T.S. (Energy Systems); (Univ. of California at Davis); (ES)

    2011-10-11

    A two-part Delphi Survey was given to transportation experts attending the Asilomar Conference on Transportation and Energy in August, 2011. The survey asked respondents about trends in the US transportation sector in 2030. Topics included: alternative vehicles, high speed rail construction, rail freight transportation, average vehicle miles traveled, truck versus passenger car shares, vehicle fuel economy, and biofuels in different modes. The survey consisted of two rounds -- both asked the same set of seven questions. In the first round, respondents were given a short introductory paragraph about the topic and asked to use their own judgment in their responses. In the second round, the respondents were asked the same questions, but were also given results from the first round as guidance. The survey was sponsored by Argonne National Lab (ANL), the National Renewable Energy Lab (NREL), and implemented by University of California at Davis, Institute of Transportation Studies. The survey was part of the larger Transportation Energy Futures (TEF) project run by the Department of Energy, Office of Energy Efficiency and Renewable Energy. Of the 206 invitation letters sent, 94 answered all questions in the first round (105 answered at least one question), and 23 of those answered all questions in the second round. 10 of the 23 second round responses were at a discussion section at Asilomar, while the remaining were online. Means and standard deviations of responses from Round One and Two are given in Table 1 below. One main purpose of Delphi surveys is to reduce the variance in opinions through successive rounds of questioning. As shown in Table 1, the standard deviations of 25 of the 30 individual sub-questions decreased between Round One and Round Two, but the decrease was slight in most cases.

  5. Delirium, sedation and analgesia in the intensive care unit: a multinational, two-part survey among intensivists.

    Directory of Open Access Journals (Sweden)

    Alawi Luetz

    Full Text Available Analgesia, sedation and delirium management are important parts of intensive care treatment as they are relevant for patients' clinical and functional long-term outcome. Previous surveys showed that despite this fact implementation rates are still low. The primary aim of the prospective, observational multicenter study was to investigate the implementation rate of delirium monitoring among intensivists. Secondly, current practice concerning analgesia and sedation monitoring as well as treatment strategies for patients with delirium were assesed. In addition, this study compares perceived and actual practice regarding delirium, sedation and analgesia management. Data were obtained with a two-part, anonymous survey, containing general data from intensive care units in a first part and data referring to individual patients in a second part. Questionnaires from 101 hospitals (part 1 and 868 patients (part 2 were included in data analysis. Fifty-six percent of the intensive care units reported to monitor for delirium in clinical routine. Fourty-four percent reported the use of a validated delirium score. In this respect, the survey suggests an increasing use of delirium assessment tools compared to previous surveys. Nevertheless, part two of the survey revealed that in actual practice 73% of included patients were not monitored with a validated score. Furthermore, we observed a trend towards moderate or deep sedation which is contradicting to guideline-recommendations. Every fifth patient was suffering from pain. The implementation rate of adequate pain-assessment tools for mechanically ventilated and sedated patients was low (30%. In conclusion, further efforts are necessary to implement guideline recommendations into clinical practice. The study was registered (ClinicalTrials.gov identifier: NCT01278524 and approved by the ethical committee.

  6. Application of 4D-QSAR Studies to a Series of Raloxifene Analogs and Design of Potential Selective Estrogen Receptor Modulators

    Directory of Open Access Journals (Sweden)

    Carlos Rangel Rodrigues

    2012-06-01

    Full Text Available Four-dimensional quantitative structure-activity relationship (4D-QSAR analysis was applied on a series of 54 2-arylbenzothiophene derivatives, synthesized by Grese and coworkers, based on raloxifene (an estrogen receptor-alpha antagonist, and evaluated as ERa ligands and as inhibitors of estrogen-stimulated proliferation of MCF-7 breast cancer cells. The conformations of each analogue, sampled from a molecular dynamics simulation, were placed in a grid cell lattice according to three trial alignments, considering two grid cell sizes (1.0 and 2.0 Å. The QSAR equations, generated by a combined scheme of genetic algorithms (GA and partial least squares (PLS regression, were evaluated by “leave-one-out” cross-validation, using a training set of 41 compounds. External validation was performed using a test set of 13 compounds. The obtained 4D-QSAR models are in agreement with the proposed mechanism of action for raloxifene. This study allowed a quantitative prediction of compounds’ potency and supported the design of new raloxifene analogs.

  7. Case Series

    African Journals Online (AJOL)

    calciphylaxis is prevention through rigorous control of phosphate and calcium balance. We here present two ... The authors declared no conflict of interest. Introduction. Calciphylaxis is a rare but serious disorder .... were reported to resolve the calciphylaxis lesions in a chronic renal failure patient [20]. In a series of five.

  8. Fourier Series

    Indian Academy of Sciences (India)

    polynomials are dense in the class of continuous functions! The body of literature dealing with Fourier series has reached epic proportions over the last two centuries. We have only given the readers an outline of the topic in this article. For the full length episode we refer the reader to the monumental treatise of. A Zygmund.

  9. Case series

    African Journals Online (AJOL)

    abp

    13 oct. 2017 ... This is an Open Access article distributed under the terms of the Creative Commons Attribution ... Bifocal leg fractures pose many challenges for the surgeon due to .... Dans notre serie, le taux d'infection est reste dans un.

  10. Fourier Series

    Indian Academy of Sciences (India)

    The theory of Fourier series deals with periodic functions. By a periodic ..... including Dirichlet, Riemann and Cantor occupied themselves with the problem of ... to converge only on a set which is negligible in a certain sense (Le. of measure ...

  11. GPS Position Time Series @ JPL

    Science.gov (United States)

    Owen, Susan; Moore, Angelyn; Kedar, Sharon; Liu, Zhen; Webb, Frank; Heflin, Mike; Desai, Shailen

    2013-01-01

    Different flavors of GPS time series analysis at JPL - Use same GPS Precise Point Positioning Analysis raw time series - Variations in time series analysis/post-processing driven by different users. center dot JPL Global Time Series/Velocities - researchers studying reference frame, combining with VLBI/SLR/DORIS center dot JPL/SOPAC Combined Time Series/Velocities - crustal deformation for tectonic, volcanic, ground water studies center dot ARIA Time Series/Coseismic Data Products - Hazard monitoring and response focused center dot ARIA data system designed to integrate GPS and InSAR - GPS tropospheric delay used for correcting InSAR - Caltech's GIANT time series analysis uses GPS to correct orbital errors in InSAR - Zhen Liu's talking tomorrow on InSAR Time Series analysis

  12. Exposures series

    OpenAIRE

    Stimson, Blake

    2011-01-01

    Reaktion Books’ Exposures series, edited by Peter Hamilton and Mark Haworth-Booth, is comprised of 13 volumes and counting, each less than 200 pages with 80 high-quality illustrations in color and black and white. Currently available titles include Photography and Australia, Photography and Spirit, Photography and Cinema, Photography and Literature, Photography and Flight, Photography and Egypt, Photography and Science, Photography and Africa, Photography and Italy, Photography and the USA, P...

  13. `Indoor` series vending machines; `Indoor` series jido hanbaiki

    Energy Technology Data Exchange (ETDEWEB)

    Gensui, T.; Kida, A. [Fuji Electric Co. Ltd., Tokyo (Japan); Okumura, H. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan)

    1996-07-10

    This paper introduces three series of vending machines that were designed to match the interior of an office building. The three series are vending machines for cups, paper packs, cans, and tobacco. Among the three series, `Interior` series has a symmetric design that was coated in a grain pattern. The inside of the `Interior` series is coated by laser satin to ensure a sense of superior quality and a refined style. The push-button used for product selection is hot-stamped on the plastic surface to ensure the hair-line luster. `Interior Phase II` series has a bay window design with a sense of superior quality and lightness. The inside of the `Interior Phase II` series is coated by laser satin. `Interior 21` series is integrated with the wall except the sales operation panel. The upper and lower dress panels can be detached and attached. The door lock is a wire-type structure with high operativity. The operation block is coated by titanium color. The dimensions of three series are standardized. 6 figs., 1 tab.

  14. DCP Series

    Directory of Open Access Journals (Sweden)

    Philip Stearns

    2011-06-01

    Full Text Available Photo essay. A collection of Images produced by intentionally corrupting the circuitry of a Kodak DC280 2 MP digitalcamera. By rewiring the electronics of a digital camera, glitched images are produced in a manner that parallels chemically processing unexposed film or photographic paper to produce photographic images without exposure to light. The DCP Series of Digital Images are direct visualizations of data generated by a digital camera as it takes a picture. Electronic processes associated with the normal operations of the camera, which are usually taken for granted, are revealed through an act of intervention. The camera is turned inside­out through complexes of short­circuits, selected by the artist, transforming the camera from a picture taking device to a data capturing device that renders raw data (electronic signals as images. In essence, these images are snap­shots of electronic signals dancing through the camera's circuits, manually rerouted, written directly to the on­board memory device. Rather than seeing images of the world through a lens, we catch a glimpse of what the camera sees when it is forced to peer inside its own mind.

  15. The Use of Piecewise Growth Models to Estimate Learning Trajectories and RtI Instructional Effects in a Comparative Interrupted Time-Series Design

    Science.gov (United States)

    Zvoch, Keith

    2016-01-01

    Piecewise growth models (PGMs) were used to estimate and model changes in the preliteracy skill development of kindergartners in a moderately sized school district in the Pacific Northwest. PGMs were applied to interrupted time-series (ITS) data that arose within the context of a response-to-intervention (RtI) instructional framework. During the…

  16. Rediscovery of the type series of the Acadian Masked Shrew, Sorex acadicus Gilpin, 1865 (Mammalia: Soricidae), with the designation of a neotype and a reevaluation of its taxonomic status

    Science.gov (United States)

    Woodman, Neal

    2018-01-01

    The name Sorex acadicus Gilpin, 1865 is currently recognized as the valid name for the Nova Scotian subspecies of the masked shrew, S. cinereus Kerr, 1792 (Mammalia: Soricidae), but a holotype for the taxon was never designated, and the location of the type series has been a mystery. The authority for this species, John Bernard Gilpin, was associated with the Nova Scotia Museum, Halifax, NS, but that institution has no Gilpin specimens in its possession, and I could find no record of Gilpin shrews in any other Canadian Museum. I recently discovered a series of Gilpin specimens in the Mammal Collection of the National Museum of Natural History, Washington, DC (USNM), some of which may have been part of the original type series of S. acadicus, and I show that these specimens best represent Gilpin's concept of the taxon. From this series, I designate a neotype for S. acadicus. I also evaluate the distinctiveness of Nova Scotian S. c. acadicus compared with S. c. cinereus from Maine, New Brunswick, and New Hampshire and determine that S. acadicus should be considered a junior synonym of S. c. cinereus.

  17. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  18. Discovery of a new chemical series of BRD4(1) inhibitors using protein-ligand docking and structure-guided design.

    Science.gov (United States)

    Duffy, Bryan C; Liu, Shuang; Martin, Gregory S; Wang, Ruifang; Hsia, Ming Min; Zhao, He; Guo, Cheng; Ellis, Michael; Quinn, John F; Kharenko, Olesya A; Norek, Karen; Gesner, Emily M; Young, Peter R; McLure, Kevin G; Wagner, Gregory S; Lakshminarasimhan, Damodharan; White, Andre; Suto, Robert K; Hansen, Henrik C; Kitchen, Douglas B

    2015-07-15

    Bromodomains are key transcriptional regulators that are thought to be druggable epigenetic targets for cancer, inflammation, diabetes and cardiovascular therapeutics. Of particular importance is the first of two bromodomains in bromodomain containing 4 protein (BRD4(1)). Protein-ligand docking in BRD4(1) was used to purchase a small, focused screening set of compounds possessing a large variety of core structures. Within this set, a small number of weak hits each contained a dihydroquinoxalinone ring system. We purchased other analogs with this ring system and further validated the new hit series and obtained improvement in binding inhibition. Limited exploration by new analog synthesis showed that the binding inhibition in a FRET assay could be improved to the low μM level making this new core a potential hit-to-lead series. Additionally, the predicted geometries of the initial hit and an improved analog were confirmed by X-ray co-crystallography with BRD4(1). Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. An Evaluation of Current Stormwater Best Management Practice Relationships Between Design and Efficiency: A Series of Local and National Case Studies

    OpenAIRE

    Goodwin, Amanda Ann

    2013-01-01

    Water quality continues to be threatened by human development activities such as stormwater runoff from urbanization. This study addresses the question of how stormwater Best Management Practice (BMP) system design choices affect pollutant removal efficiency, through the examination of 12 case study sites (across five states) that use three common BMP system design types (detention, retention, and wetland channel). Water quality information was obtained from the International Stormwater Datab...

  20. Design and docking of novel series of hybrid xanthones as anti-cancer agent to target human DNA topoisomerase 2-alpha

    Directory of Open Access Journals (Sweden)

    Lalit Mohan Nainwal

    2014-06-01

    Full Text Available Topoisomerase (topo IIα is a homodimeric protein catalyzes topological vicissitudes by adding or by soothing super coiling transpiration, occurs in human DNA during DNA replication as an outcome chromosome segregation and condensation occurs during meiosis I and recombination. To prevent the cleavage and religation activity we administered novel hybrid substituted Xanthone series of drugs. The toxicity prediction showed outstanding results which impetus to study its anticancer activities by targeting topoisomerase (topo IIα. We developed the homology model of the topoisomerase (topo IIα due to the unavailability of 3D structure in the Protein Data Bank. Structural assessment of the modeled protein and confirmed the quality of the model. The ligands were docked using Autodock4.2 software and binding energy was reported. The compound XM9, XN2, XM7, XLNU and XNS scored lowest binding energy and highest binding affinity. The interaction sites and the hydrogen bond were observed.

  1. Omega test series - an overview

    International Nuclear Information System (INIS)

    Knowles, C.P.

    2001-01-01

    The United States Defense Threat Reduction Agency (DTRA) has supported a series of high explosive calibration experiments that were conducted in the Degelen Mountain area of the Semipalatinsk Test Site (STS) in the Republic of Kazakhstan (ROK). This paper will provide an overview of the second and third tests of this series which have been designated Omega-2 and Omega-3. Omega-2 was conducted on Saturday, September 25, 1999 and Omega-3 on Saturday, July 29, 2000. (author)

  2. Square summable power series

    CERN Document Server

    de Branges, Louis

    2015-01-01

    This text for advanced undergraduate and graduate students introduces Hilbert space and analytic function theory, which is centered around the invariant subspace concept. The book's principal feature is the extensive use of formal power series methods to obtain and sometimes reformulate results of analytic function theory. The presentation is elementary in that it requires little previous knowledge of analysis, but it is designed to lead students to an advanced level of performance. This is achieved chiefly through the use of problems, many of which were proposed by former students. The book's

  3. Quasi-experimental study designs series-paper 10: synthesizing evidence for effects collected from quasi-experimental studies presents surmountable challenges.

    Science.gov (United States)

    Becker, Betsy Jane; Aloe, Ariel M; Duvendack, Maren; Stanley, T D; Valentine, Jeffrey C; Fretheim, Atle; Tugwell, Peter

    2017-09-01

    To outline issues of importance to analytic approaches to the synthesis of quasi-experiments (QEs) and to provide a statistical model for use in analysis. We drew on studies of statistics, epidemiology, and social-science methodology to outline methods for synthesis of QE studies. The design and conduct of QEs, effect sizes from QEs, and moderator variables for the analysis of those effect sizes were discussed. Biases, confounding, design complexities, and comparisons across designs offer serious challenges to syntheses of QEs. Key components of meta-analyses of QEs were identified, including the aspects of QE study design to be coded and analyzed. Of utmost importance are the design and statistical controls implemented in the QEs. Such controls and any potential sources of bias and confounding must be modeled in analyses, along with aspects of the interventions and populations studied. Because of such controls, effect sizes from QEs are more complex than those from randomized experiments. A statistical meta-regression model that incorporates important features of the QEs under review was presented. Meta-analyses of QEs provide particular challenges, but thorough coding of intervention characteristics and study methods, along with careful analysis, should allow for sound inferences. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. 78 FR 67291 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Design...

    Science.gov (United States)

    2013-11-12

    .... 611 of Public Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special conditions, as... have a novel or unusual design feature associated with an electronic flight control system that provides roll control of the airplanes through pilot inputs to the flight computers. The applicable...

  5. A Comparison of Four Linear Equating Methods for the Common-Item Nonequivalent Groups Design Using Simulation Methods. ACT Research Report Series, 2013 (2)

    Science.gov (United States)

    Topczewski, Anna; Cui, Zhongmin; Woodruff, David; Chen, Hanwei; Fang, Yu

    2013-01-01

    This paper investigates four methods of linear equating under the common item nonequivalent groups design. Three of the methods are well known: Tucker, Angoff-Levine, and Congeneric-Levine. A fourth method is presented as a variant of the Congeneric-Levine method. Using simulation data generated from the three-parameter logistic IRT model we…

  6. Quasi-experimental study designs series-paper 5: a checklist for classifying studies evaluating the effects on health interventions-a taxonomy without labels.

    Science.gov (United States)

    Reeves, Barnaby C; Wells, George A; Waddington, Hugh

    2017-09-01

    The aim of the study was to extend a previously published checklist of study design features to include study designs often used by health systems researchers and economists. Our intention is to help review authors in any field to set eligibility criteria for studies to include in a systematic review that relate directly to the intrinsic strength of the studies in inferring causality. We also seek to clarify key equivalences and differences in terminology used by different research communities. Expert consensus meeting. The checklist comprises seven questions, each with a list of response items, addressing: clustering of an intervention as an aspect of allocation or due to the intrinsic nature of the delivery of the intervention; for whom, and when, outcome data are available; how the intervention effect was estimated; the principle underlying control for confounding; how groups were formed; the features of a study carried out after it was designed; and the variables measured before intervention. The checklist clarifies the basis of credible quasi-experimental studies, reconciling different terminology used in different fields of investigation and facilitating communications across research communities. By applying the checklist, review authors' attention is also directed to the assumptions underpinning the methods for inferring causality. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  7. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    Design - proces & metode iBog®  er enestående i sit fokus på afmystificering og operationalisering af designprocessens flygtige og komplekse karakter. Udgivelsen går bag om designerens daglige arbejde og giver et indblik i den kreative skabelsesproces, som designeren er en del af. Udover et bredt...... indblik i designerens arbejdsmetoder og designparametre giver Design - proces & metode en række eksempler fra anerkendte designvirksomheder, der gør det muligt at komme helt tæt på designerens virkelighed....

  8. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  9. Summation of series

    CERN Document Server

    Jolley, LB W

    2004-01-01

    Over 1,100 common series, all grouped for easy reference. Arranged by category, these series include arithmetical and geometrical progressions, powers and products of natural numbers, figurate and polygonal numbers, inverse natural numbers, exponential and logarithmic series, binomials, simple inverse products, factorials, trigonometrical and hyperbolic expansions, and additional series. 1961 edition.

  10. Propensity score matching for selection of local areas as controls for evaluation of effects of alcohol policies in case series and quasi case-control designs.

    Science.gov (United States)

    de Vocht, F; Campbell, R; Brennan, A; Mooney, J; Angus, C; Hickman, M

    2016-03-01

    Area-level public health interventions can be difficult to evaluate using natural experiments. We describe the use of propensity score matching (PSM) to select control local authority areas (LAU) to evaluate the public health impact of alcohol policies for (1) prospective evaluation of alcohol policies using area-level data, and (2) a novel two-stage quasi case-control design. Ecological. Alcohol-related indicator data (Local Alcohol Profiles for England, PHE Health Profiles and ONS data) were linked at LAU level. Six LAUs (Blackpool, Bradford, Bristol, Ipswich, Islington, and Newcastle-upon-Tyne) as sample intervention or case areas were matched to two control LAUs each using PSM. For the quasi case-control study a second stage was added aimed at obtaining maximum contrast in outcomes based on propensity scores. Matching was evaluated based on average standardized absolute mean differences (ASAM) and variable-specific P-values after matching. The six LAUs were matched to suitable control areas (with ASAM 0.05 indicating good matching) for a prospective evaluation study that sought areas that were similar at baseline in order to assess whether a change in intervention exposure led to a change in the outcome (alcohol related harm). PSM also generated appropriate matches for a quasi case-control study--whereby the contrast in health outcomes between cases and control areas needed to be optimized in order to assess retrospectively whether differences in intervention exposure were associated with the outcome. The use of PSM for area-level alcohol policy evaluation, but also for other public health interventions, will improve the value of these evaluations by objective and quantitative selection of the most appropriate control areas. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  11. Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Pettiway, Keon

    2017-01-01

    In this chapter, Ole B. Jensen takes a situational approach to mobilities to examine how ordinary life activities are structured by technology and design. Using “staging mobilities” as a theoretical approach, Jensen considers mobilities as overlapping, actions, interactions and decisions by desig...... by providing ideas about future research for investigating mobilities in situ as a kind of “staging,” which he notes is influenced by the “material turn” in social sciences....... with a brief description of how movement is studied within social sciences after the “mobilities turn” versus the idea of physical movement in transport geography and engineering. He then explains how “mobilities design” was derived from connections between traffic and architecture. Jensen concludes...

  12. Design of a rotating-hearth furnace

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, H A [Verein Deutscher Eisenhuettenleute (VDEh), Duesseldorf (Germany, F.R.)

    1979-10-01

    Presented in two parts, this paper is intended to provide an outline of the theoretical fundamentals for the design of rotating-hearth furnaces for heating round stock and deals with the characteristic design features of such furnaces.

  13. The benefits of molecular pathology in the diagnosis of musculoskeletal disease. Part I of a two-part review: soft tissue tumors

    International Nuclear Information System (INIS)

    Flanagan, Adrienne M.; Delaney, David; O'Donnell, Paul

    2010-01-01

    Bone and soft tissue metabolic and neoplastic diseases are increasingly characterized by their molecular signatures. This has resulted from increased knowledge of the human genome, which has contributed to the unraveling of molecular pathways in health and disease. Exploitation of this information has allowed it to be used for practical diagnostic purposes. The aim of the first part of this two-part review is to provide an up-to-date review of molecular genetic investigations that are available and routinely used by specialist musculoskeletal histopathologists in the diagnosis of neoplastic disease. Herein we focus on the benefits of employing well characterized somatic mutations in soft tissue lesions that are commonly employed in diagnostic pathology today. The second part highlights the known somatic and germline mutations implicated in osteoclast-rich lesions of bone, and the genetic changes that disturb phosphate metabolism and result in a variety of musculoskeletal phenotypes. Finally, a brief practical guide of how to use and provide a molecular pathology service is given. (orig.)

  14. An assessment of innovative pricing schemes for the communication of value: is price discrimination and two-part pricing a way forward?

    Science.gov (United States)

    Hertzman, Peter; Miller, Paul; Tolley, Keith

    2018-02-01

    With the introduction of new expensive medicines, traditional pricing schemes based on constructs such as price per pill/vial have been challenged. Potential innovative schemes could be either financial-based or performance-based. Within financial-based schemes the use of price discrimination is an emerging option, which we explore in this assessment. Areas covered: In the short term the price per indication approach is likely to become more prevalent for high cost, high benefit new pharmaceuticals, such as those emerging in oncology (e.g. new combination immunotherapies). 'Two-Part Pricing' (2PP) is a frequently used payment method in other industries, which consists of an Entry Fee, giving the buyer the right to use the product, and a Usage Price charged every time the product is purchased. Introducing 2PP into biopharma could have cross-stakeholder benefits including broader patient access, and improvement in budget/revenue predictability. A concern however is the potential complexity of the negotiation between manufacturer and payer. Expert commentary: We believe 'price discrimination' and 2PP in particular can be relevant for some new, expensive specialist medicines. A recommended first step would be to initiate pilots to test to what degree the 2PP approach meets stakeholder objectives and is practical to implement within specialty care.

  15. Risk factors and outcomes of chronic sexual harassment during the transition to college: Examination of a two-part growth mixture model

    Science.gov (United States)

    McGinley, Meredith; Wolff, Jennifer M.; Rospenda, Kathleen M.; Liu, Li; Richman, Judith A.

    2016-01-01

    A two-part latent growth mixture model was implemented in order to examine heterogeneity in the growth of sexual harassment (SH) victimization in college and university students, and the extent to which SH class membership explains substance use and mental health outcomes for certain groups of students. Demographic risk factors, mental health, and substance use were examined as they related to chronically experienced SH victimization. Incoming freshmen students (N = 2855; 58% female; 54% White) completed a survey at five time points. In addition to self-reporting gender, race, and sexual orientation, students completed measures of sexual harassment, anxiety, depression, binge drinking, and marijuana use. Overall, self-reported SH declined upon college entry, although levels rebounded by the third year of college. Results also supported a two-class solution (Infrequent and Chronic) for SH victimization. Being female, White, and a sexual minority were linked to being classified into the Chronic (relative to the Infrequent) SH class. In turn, Chronic SH class membership predicted greater anxiety, depression, and substance use, supporting a mediational model. PMID:27712687

  16. Risk factors and outcomes of chronic sexual harassment during the transition to college: Examination of a two-part growth mixture model.

    Science.gov (United States)

    McGinley, Meredith; Wolff, Jennifer M; Rospenda, Kathleen M; Liu, Li; Richman, Judith A

    2016-11-01

    A two-part latent growth mixture model was implemented in order to examine heterogeneity in the growth of sexual harassment (SH) victimization in college and university students, and the extent to which SH class membership explains substance use and mental health outcomes for certain groups of students. Demographic risk factors, mental health, and substance use were examined as they related to chronically experienced SH victimization. Incoming freshmen students (N = 2855; 58% female; 54% White) completed a survey at five time points. In addition to self-reporting gender, race, and sexual orientation, students completed measures of sexual harassment, anxiety, depression, binge drinking, and marijuana use. Overall, self-reported SH declined upon college entry, although levels rebounded by the third year of college. Results also supported a two-class solution (Infrequent and Chronic) for SH victimization. Being female, White, and a sexual minority were linked to being classified into the Chronic (relative to the Infrequent) SH class. In turn, Chronic SH class membership predicted greater anxiety, depression, and substance use, supporting a mediational model. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Geometric Series via Probability

    Science.gov (United States)

    Tesman, Barry

    2012-01-01

    Infinite series is a challenging topic in the undergraduate mathematics curriculum for many students. In fact, there is a vast literature in mathematics education research on convergence issues. One of the most important types of infinite series is the geometric series. Their beauty lies in the fact that they can be evaluated explicitly and that…

  18. On the series

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... http://www.ias.ac.in/article/fulltext/pmsc/115/04/0371-0381. Keywords. Inverse binomial series; hypergeometric series; polylogarithms; integral representations. Abstract. In this paper we investigate the series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k . Obtaining some integral representations of them, we evaluated the ...

  19. Lag space estimation in time series modelling

    DEFF Research Database (Denmark)

    Goutte, Cyril

    1997-01-01

    The purpose of this article is to investigate some techniques for finding the relevant lag-space, i.e. input information, for time series modelling. This is an important aspect of time series modelling, as it conditions the design of the model through the regressor vector a.k.a. the input layer...

  20. Magnetic Field Emission Comparison for Series-Parallel and Series-Series Wireless Power Transfer to Vehicles – PART 2/2

    DEFF Research Database (Denmark)

    Batra, Tushar; Schaltz, Erik

    2014-01-01

    Series-series and series-parallel topologies are the most favored topologies for design of wireless power transfer system for vehicle applications. The series-series topology has the advantage of reflecting only the resistive part on the primary side. On the other hand, the current source output...... characteristics of the series-parallel topology are more suited for the battery of the vehicle. This paper compares the two topologies in terms of magnetic emissions to the surroundings for the same input power, primary current, quality factor and inductors. Theoretical and simulation results show that the series...

  1. Phase I, Dose-Escalation, Two-Part Trial of the PARP Inhibitor Talazoparib in Patients with Advanced Germline BRCA1/2 Mutations and Selected Sporadic Cancers.

    Science.gov (United States)

    de Bono, Johann; Ramanathan, Ramesh K; Mina, Lida; Chugh, Rashmi; Glaspy, John; Rafii, Saeed; Kaye, Stan; Sachdev, Jasgit; Heymach, John; Smith, David C; Henshaw, Joshua W; Herriott, Ashleigh; Patterson, Miranda; Curtin, Nicola J; Byers, Lauren Averett; Wainberg, Zev A

    2017-06-01

    Talazoparib inhibits PARP catalytic activity, trapping PARP1 on damaged DNA and causing cell death in BRCA1/2 -mutated cells. We evaluated talazoparib therapy in this two-part, phase I, first-in-human trial. Antitumor activity, MTD, pharmacokinetics, and pharmacodynamics of once-daily talazoparib were determined in an open-label, multicenter, dose-escalation study (NCT01286987). The MTD was 1.0 mg/day, with an elimination half-life of 50 hours. Treatment-related adverse events included fatigue (26/71 patients; 37%) and anemia (25/71 patients; 35%). Grade 3 to 4 adverse events included anemia (17/71 patients; 24%) and thrombocytopenia (13/71 patients; 18%). Sustained PARP inhibition was observed at doses ≥0.60 mg/day. At 1.0 mg/day, confirmed responses were observed in 7 of 14 (50%) and 5 of 12 (42%) patients with BRCA mutation-associated breast and ovarian cancers, respectively, and in patients with pancreatic and small cell lung cancer. Talazoparib demonstrated single-agent antitumor activity and was well tolerated in patients at the recommended dose of 1.0 mg/day. Significance: In this clinical trial, we show that talazoparib has single-agent antitumor activity and a tolerable safety profile. At its recommended phase II dose of 1.0 mg/day, confirmed responses were observed in patients with BRCA mutation-associated breast and ovarian cancers and in patients with pancreatic and small cell lung cancer. Cancer Discov; 7(6); 620-9. ©2017 AACR. This article is highlighted in the In This Issue feature, p. 539 . ©2017 American Association for Cancer Research.

  2. Design of a rotary reactor for chemical-looping combustion. Part 1: Fundamentals and design methodology

    KAUST Repository

    Zhao, Zhenlong

    2014-04-01

    Chemical-looping combustion (CLC) is a novel and promising option for several applications including carbon capture (CC), fuel reforming, H 2 generation, etc. Previous studies demonstrated the feasibility of performing CLC in a novel rotary design with micro-channel structures. In the reactor, a solid wheel rotates between the fuel and air streams at the reactor inlet, and depleted air and product streams at exit. The rotary wheel consists of a large number of micro-channels with oxygen carriers (OC) coated on the inner surface of the channel walls. In the CC application, the OC oxidizes the fuel while the channel is in the fuel zone to generate undiluted CO2, and is regenerated while the channel is in the air zone. In this two-part series, the effect of the reactor design parameters is evaluated and its performance with different OCs is compared. In Part 1, the design objectives and criteria are specified and the key parameters controlling the reactor performance are identified. The fundamental effects of the OC characteristics, the design parameters, and the operating conditions are studied. The design procedures are presented on the basis of the relative importance of each parameter, enabling a systematic methodology of selecting the design parameters and the operating conditions with different OCs. Part 2 presents the application of the methodology to the designs with the three commonly used OCs, i.e., nickel, copper, and iron, and compares the simulated performances of the designs. © 2013 Elsevier Ltd. All rights reserved.

  3. Series expansions without diagrams

    International Nuclear Information System (INIS)

    Bhanot, G.; Creutz, M.; Horvath, I.; Lacki, J.; Weckel, J.

    1994-01-01

    We discuss the use of recursive enumeration schemes to obtain low- and high-temperature series expansions for discrete statistical systems. Using linear combinations of generalized helical lattices, the method is competitive with diagrammatic approaches and is easily generalizable. We illustrate the approach using Ising and Potts models. We present low-temperature series results in up to five dimensions and high-temperature series in three dimensions. The method is general and can be applied to any discrete model

  4. Fourier Series Optimization Opportunity

    Science.gov (United States)

    Winkel, Brian

    2008-01-01

    This note discusses the introduction of Fourier series as an immediate application of optimization of a function of more than one variable. Specifically, it is shown how the study of Fourier series can be motivated to enrich a multivariable calculus class. This is done through discovery learning and use of technology wherein students build the…

  5. Visualizing the Geometric Series.

    Science.gov (United States)

    Bennett, Albert B., Jr.

    1989-01-01

    Mathematical proofs often leave students unconvinced or without understanding of what has been proved, because they provide no visual-geometric representation. Presented are geometric models for the finite geometric series when r is a whole number, and the infinite geometric series when r is the reciprocal of a whole number. (MNS)

  6. Upper Gastrointestinal (GI) Series

    Science.gov (United States)

    ... standard barium upper GI series, which uses only barium a double-contrast upper GI series, which uses both air and ... evenly coat your upper GI tract with the barium. If you are having a double-contrast study, you will swallow gas-forming crystals that ...

  7. Short-term and sustained effects of a health system strengthening intervention to improve mortality trends for paediatric severe malnutrition in rural South African hospitals: An interrupted time series design

    Directory of Open Access Journals (Sweden)

    M Muzigaba

    2017-04-01

    Full Text Available Background. Case fatality rates for childhood severe acute malnutrition (SAM remain high in some resource-limited facilities in South Africa (SA, despite the widespread availability of the World Health Organization treatment guidelines. There is a need to develop reproducible interventions that reinforce the implementation of these guidelines and assess their effect and sustainability. Objectives. To assess the short-term and sustained effects of a health system strengthening intervention on mortality attributable to SAM in two hospitals located in the Eastern Cape Province of SA. Methods. This was a theory-driven evaluation conducted in two rural hospitals in SA over a 69-month period (2009 - 2014. In both facilities, a health system strengthening intervention was implemented within the first 32 months, and thereafter discontinued. Sixty-nine monthly data series were collected on: (i monthly total SAM case fatality rate (CFR; (ii monthly SAM CFR within 24 hours of admission; and (iii monthly SAM CFR among HIV-positive cases, to determine the intervention’s effect within the first 32 months and sustainability over the remaining 37 months. The data were analysed using Linden’s method for analysing interrupted time series data. Results. The study revealed that the intervention was associated with a statistically significant decrease of up to 0.4% in monthly total SAM CFR, a non-statistically significant decrease of up to 0.09% in monthly SAM CFR within 24 hours of admission and a non-statistically significant decrease of up to 0.11% in monthly SAM CFR among HIV-positive cases. The decrease in mortality trends for both outcomes was only slightly reversed upon the discontinuation of the intervention. No autocorrelation was detected in the regression models generated during data analyses. Conclusion. The study findings suggest that although the intervention was designed to be self-sustaining, this may not have been the case. A qualitative enquiry

  8. SERI Wind Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Noun, R. J.

    1983-06-01

    The SERI Wind Energy Program manages the areas or innovative research, wind systems analysis, and environmental compatibility for the U.S. Department of Energy. Since 1978, SERI wind program staff have conducted in-house aerodynamic and engineering analyses of novel concepts for wind energy conversion and have managed over 20 subcontracts to determine technical feasibility; the most promising of these concepts is the passive blade cyclic pitch control project. In the area of systems analysis, the SERI program has analyzed the impact of intermittent generation on the reliability of electric utility systems using standard utility planning models. SERI has also conducted methodology assessments. Environmental issues related to television interference and acoustic noise from large wind turbines have been addressed. SERI has identified the causes, effects, and potential control of acoustic noise emissions from large wind turbines.

  9. Magnetic Field Emission Comparison for Series-Parallel and Series-Series Wireless Power Transfer to Vehicles – PART 1/2

    DEFF Research Database (Denmark)

    Batra, Tushar; Schaltz, Erik

    2014-01-01

    Resonant circuits of wireless power transfer system can be designed in four possible ways by placing the primary and secondary capacitor in a series or parallel order with respect to the corresponding inductor. The two topologies series-parallel and series-series under investigation have been...... already compared in terms of their output behavior (current or voltage source) and reflection of the secondary impedance on the primary side. In this paper it is shown that for the same power rating series-parallel topology emits lesser magnetic fields to the surroundings than its series...

  10. Design of common software for quality control of SPECT

    International Nuclear Information System (INIS)

    Li Xiaohua; Gao Ruzhen; Chen Shengzu

    1993-01-01

    The goal of this study is to design a common testing system for SPECT quality control according to NEMA standard. Using the system, the performances of different types of SPECT can be tested, so that the acceptance testing, performance comparing and routine quality control for SPECT can be normalized. The system was based on IBM PC series of microcomputer. Testing data are acquired from various types of SPECT, then transferred into IBM PC through interface and tested with an unique testing program. Two parts were included: interface and SPECT testing program. It emphatically studied the managing program of RS232 interface, designing skills and the mathematic patterns of SPECT testing program. The system which was composed of 11 subroutines can be used to measure the performances for both gamma camera and SPECT. The system was tested on OMEGA 500/MCS 560 SPECT and the results showed that it is effective, accurate and easy to use

  11. Divergent Perturbation Series

    International Nuclear Information System (INIS)

    Suslov, I.M.

    2005-01-01

    Various perturbation series are factorially divergent. The behavior of their high-order terms can be determined by Lipatov's method, which involves the use of instanton configurations of appropriate functional integrals. When the Lipatov asymptotic form is known and several lowest order terms of the perturbation series are found by direct calculation of diagrams, one can gain insight into the behavior of the remaining terms of the series, which can be resummed to solve various strong-coupling problems in a certain approximation. This approach is demonstrated by determining the Gell-Mann-Low functions in φ 4 theory, QED, and QCD with arbitrary coupling constants. An overview of the mathematical theory of divergent series is presented, and interpretation of perturbation series is discussed. Explicit derivations of the Lipatov asymptotic form are presented for some basic problems in theoretical physics. A solution is proposed to the problem of renormalon contributions, which hampered progress in this field in the late 1970s. Practical perturbation-series summation schemes are described both for a coupling constant of order unity and in the strong-coupling limit. An interpretation of the Borel integral is given for 'non-Borel-summable' series. Higher order corrections to the Lipatov asymptotic form are discussed

  12. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  13. Multivariate Time Series Search

    Data.gov (United States)

    National Aeronautics and Space Administration — Multivariate Time-Series (MTS) are ubiquitous, and are generated in areas as disparate as sensor recordings in aerospace systems, music and video streams, medical...

  14. Historical Climatology Series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Climatology Series (HCS) is a set of climate-related publications published by NOAA's National Climatic Data Center beginning in 1978. HCS is...

  15. Options in Education: Program No. 88. Sex and Sexism in Education, Part II. Transcripts of a Weekly Series Broadcast by Member Stations of National Public Radio.

    Science.gov (United States)

    National Public Radio, Washington, DC.

    This booklet is a transcription of a program from the radio series, "Options in Education." It is part 2 of a two-part series dealing with sexism in education. It deals with sex discrimination in various aspects of public education, including textbooks, teacher promotion, sports programs and children's literature. There is also a…

  16. Long time series

    DEFF Research Database (Denmark)

    Hisdal, H.; Holmqvist, E.; Hyvärinen, V.

    Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the......Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the...

  17. Analysis of series resonant converter with series-parallel connection

    Science.gov (United States)

    Lin, Bor-Ren; Huang, Chien-Lan

    2011-02-01

    In this study, a parallel inductor-inductor-capacitor (LLC) resonant converter series-connected on the primary side and parallel-connected on the secondary side is presented for server power supply systems. Based on series resonant behaviour, the power metal-oxide-semiconductor field-effect transistors are turned on at zero voltage switching and the rectifier diodes are turned off at zero current switching. Thus, the switching losses on the power semiconductors are reduced. In the proposed converter, the primary windings of the two LLC converters are connected in series. Thus, the two converters have the same primary currents to ensure that they can supply the balance load current. On the output side, two LLC converters are connected in parallel to share the load current and to reduce the current stress on the secondary windings and the rectifier diodes. In this article, the principle of operation, steady-state analysis and design considerations of the proposed converter are provided and discussed. Experiments with a laboratory prototype with a 24 V/21 A output for server power supply were performed to verify the effectiveness of the proposed converter.

  18. On Sums of Numerical Series and Fourier Series

    Science.gov (United States)

    Pavao, H. Germano; de Oliveira, E. Capelas

    2008-01-01

    We discuss a class of trigonometric functions whose corresponding Fourier series, on a conveniently chosen interval, can be used to calculate several numerical series. Particular cases are presented and two recent results involving numerical series are recovered. (Contains 1 note.)

  19. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1993-01-01

    Reliability-based design of structural systems is considered. In particular, systems where the reliability model is a series system of parallel systems are treated. A sensitivity analysis for this class of problems is presented. Optimization problems with series systems of parallel systems...... optimization of series systems of parallel systems, but it is also efficient in reliability-based optimization of series systems in general....

  20. Time Series Analysis of Wheat Futures Reward in China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Different from the fact that the main researches are focused on single futures contract and lack of the comparison of different periods, this paper described the statistical characteristics of wheat futures reward time series of Zhengzhou Commodity Exchange in recent three years. Besides the basic statistic analysis, the paper used the GARCH and EGARCH model to describe the time series which had the ARCH effect and analyzed the persistence of volatility shocks and the leverage effect. The results showed that compared with that of normal one,wheat futures reward series were abnormality, leptokurtic and thick tail distribution. The study also found that two-part of the reward series had no autocorrelation. Among the six correlative series, three ones presented the ARCH effect. By using of the Auto-regressive Distributed Lag Model, GARCH model and EGARCH model, the paper demonstrates the persistence of volatility shocks and the leverage effect on the wheat futures reward time series. The results reveal that on the one hand, the statistical characteristics of the wheat futures reward are similar to the aboard mature futures market as a whole. But on the other hand, the results reflect some shortages such as the immatureness and the over-control by the government in the Chinese future market.

  1. Visual time series analysis

    DEFF Research Database (Denmark)

    Fischer, Paul; Hilbert, Astrid

    2012-01-01

    We introduce a platform which supplies an easy-to-handle, interactive, extendable, and fast analysis tool for time series analysis. In contrast to other software suits like Maple, Matlab, or R, which use a command-line-like interface and where the user has to memorize/look-up the appropriate...... commands, our application is select-and-click-driven. It allows to derive many different sequences of deviations for a given time series and to visualize them in different ways in order to judge their expressive power and to reuse the procedure found. For many transformations or model-ts, the user may...... choose between manual and automated parameter selection. The user can dene new transformations and add them to the system. The application contains efficient implementations of advanced and recent techniques for time series analysis including techniques related to extreme value analysis and filtering...

  2. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

  3. Rheumatoid Arthritis Educational Video Series

    Science.gov (United States)

    ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  4. Time Series Momentum

    DEFF Research Database (Denmark)

    Moskowitz, Tobias J.; Ooi, Yao Hua; Heje Pedersen, Lasse

    2012-01-01

    We document significant “time series momentum” in equity index, currency, commodity, and bond futures for each of the 58 liquid instruments we consider. We find persistence in returns for one to 12 months that partially reverses over longer horizons, consistent with sentiment theories of initial...... under-reaction and delayed over-reaction. A diversified portfolio of time series momentum strategies across all asset classes delivers substantial abnormal returns with little exposure to standard asset pricing factors and performs best during extreme markets. Examining the trading activities...

  5. Applied time series analysis

    CERN Document Server

    Woodward, Wayne A; Elliott, Alan C

    2011-01-01

    ""There is scarcely a standard technique that the reader will find left out … this book is highly recommended for those requiring a ready introduction to applicable methods in time series and serves as a useful resource for pedagogical purposes.""-International Statistical Review (2014), 82""Current time series theory for practice is well summarized in this book.""-Emmanuel Parzen, Texas A&M University""What an extraordinary range of topics covered, all very insightfully. I like [the authors'] innovations very much, such as the AR factor table.""-David Findley, U.S. Census Bureau (retired)""…

  6. Predicting chaotic time series

    International Nuclear Information System (INIS)

    Farmer, J.D.; Sidorowich, J.J.

    1987-01-01

    We present a forecasting technique for chaotic data. After embedding a time series in a state space using delay coordinates, we ''learn'' the induced nonlinear mapping using local approximation. This allows us to make short-term predictions of the future behavior of a time series, using information based only on past values. We present an error estimate for this technique, and demonstrate its effectiveness by applying it to several examples, including data from the Mackey-Glass delay differential equation, Rayleigh-Benard convection, and Taylor-Couette flow

  7. The Effect of Integration of Self-Management Web Platforms on Health Status in Chronic Obstructive Pulmonary Disease Management in Primary Care (e-Vita Study): Interrupted Time Series Design.

    Science.gov (United States)

    Talboom-Kamp, Esther Pwa; Verdijk, Noortje A; Kasteleyn, Marise J; Harmans, Lara M; Talboom, Irvin Jsh; Looijmans-van den Akker, Ingrid; van Geloven, Nan; Numans, Mattijs E; Chavannes, Niels H

    2017-08-16

    Worldwide nearly 3 million people die from chronic obstructive pulmonary disease (COPD) every year. Integrated disease management (IDM) improves quality of life for COPD patients and can reduce hospitalization. Self-management of COPD through eHealth is an effective method to improve IDM and clinical outcomes. The objective of this implementation study was to investigate the effect of 3 chronic obstructive pulmonary disease eHealth programs applied in primary care on health status. The e-Vita COPD study compares different levels of integration of Web-based self-management platforms in IDM in 3 primary care settings. Patient health status is examined using the Clinical COPD Questionnaire (CCQ). The parallel cohort design includes 3 levels of integration in IDM (groups 1, 2, 3) and randomization of 2 levels of personal assistance for patients (group A, high assistance, group B, low assistance). Interrupted time series (ITS) design was used to collect CCQ data at multiple time points before and after intervention, and multilevel linear regression modeling was used to analyze CCQ data. Of the 702 invited patients, 215 (30.6%) registered to a platform. Of these, 82 participated in group 1 (high integration IDM), 36 in group 1A (high assistance), and 46 in group 1B (low assistance); 96 participated in group 2 (medium integration IDM), 44 in group 2A (high assistance) and 52 in group 2B (low assistance); also, 37 participated in group 3 (no integration IDM). In the total group, no significant difference was found in change in CCQ trend (P=.334) before (-0.47% per month) and after the intervention (-0.084% per month). Also, no significant difference was found in CCQ changes before versus after the intervention between the groups with high versus low personal assistance. In all subgroups, there was no significant change in the CCQ trend before and after the intervention (group 1A, P=.237; 1B, P=.991; 2A, P=.120; 2B, P=.166; 3, P=.945). The e-Vita eHealth-supported COPD

  8. Danish television drama series

    DEFF Research Database (Denmark)

    Degn, Hans-Peter; Krogager, Stinne Gunder Strøm

    2017-01-01

    In recent years, Danish television drama series have become an internationally acclaimed export success. This article analyses the development on the domestic market lying behind this international recognition. A change in production dogmas has formed the characteristics of these successful Danish...... the characteristics of these productions and the development of their audience profiles across age, gender and educational level....

  9. Composition: Unity - Diversity series

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2015-01-01

    Unity-Diversity series are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it...

  10. Series, Prof. George William

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1984 Honorary. Series, Prof. George William. Date of birth: 22 February 1920. Date of death: 2 January 1995. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  11. On the series

    Indian Academy of Sciences (India)

    Home; Journals; Proceedings – Mathematical Sciences; Volume 115; Issue 4. On the Series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k. Necdet Batir. Volume 115 Issue 4 November 2005 pp 371- ... Author Affiliations. Necdet Batir1. Department of Mathematics, Faculty of Arts and Sciences, Yüzüncü Yil University, 65080 Van, Turkey ...

  12. Simple Hofmeister series

    NARCIS (Netherlands)

    Lyklema, J.

    2009-01-01

    Hofmeister, or lyotropic, series date back to 1888, when the founder arranged a large number of electrolytes in sequences with respect to their effectiveness salting out egg white. Since then the name has been applied to various phenomena involving ion specificity. In order to isolate effects

  13. 5. CASE SERIES OF MANIA SECONDARY

    African Journals Online (AJOL)

    Esem

    meeting the criteria for DSM IV- TR is increasing. What is not clear with this increase is whether it is primary mania or secondary mania linked with HIV. METHODS. This study design was a case series in which patients with acute manic episodes were admitted to. Chainama Hills College Hospital and University. Teaching ...

  14. THE FOURIER SERIES USED IN ANALYSE OF THE CAM MECHANISMS FOR THE SHOEMAKING MACHINES (PART I

    Directory of Open Access Journals (Sweden)

    IOVAN-DRAGOMIR Alina

    2016-05-01

    Full Text Available A computer assisted procedure for the cinematic analysis of the mechanism of a cam is essential in making a certain type of research operations. They mainly refer to the optimization of operations running on specific machinery, or to the re-design of the mechanism, in order to make the mechanism digital. This analysis seems even more important, when we consider the fact that most of the machines used in shoe industry nowadays use a cam mechanism. The paper is devided in two parts. In first part, it is elaborated a method of finding of a function G(x, belonging to a Fourier series, which approximates the numerical values {xi, yi}, with the biggest accuracy. Finding the function that approximates the most accurately the data set, for the position parameters of the follower S(ω, ( will lead to a complete kinematic and dynamic analysis of the cam mechanism. These values repeat with T = 2π period. In second part, the method is tasted using MatCAD work sessions which allow a numerical and graphical analysis of the mathematical relations involved, in order to test the reability of the method. The set of experimental data are resulted after measuring a cam mechanism of a machine used in shoemaking.

  15. The Ostomy: Part One of Two Parts.

    Science.gov (United States)

    Watt, Rosemary C.; And Others

    1985-01-01

    Teaches nurses to identify four common indications for fecal diversion surgery: list three types of colostomies; distinguish a colostomy from an ileostomy; describe the two basic methods of colostomy management; and identify factors that influence the choice of method of colostomy care. (CT)

  16. Historia de las series

    OpenAIRE

    Cascajosa Virino, Concepción

    2017-01-01

    Reseña: Historia de las series de Toni de la Torre: la gran impostura Durante mucho tiempo los profesores de cine en España se han quejado (amargamente y en privado) de la recurrencia en la bibliografía de los trabajos de sus estudiantes de los libros de un autor conocido por la escasa calidad de sus textos, cuyos vistosos títulos garantizan que acaben en las estanterías de las bibliotecas universitarias. Es muy propio de la cultura española hacer duras aseveraciones en foros irrelevantes y, ...

  17. Infinite sequences and series

    CERN Document Server

    Knopp, Konrad

    1956-01-01

    One of the finest expositors in the field of modern mathematics, Dr. Konrad Knopp here concentrates on a topic that is of particular interest to 20th-century mathematicians and students. He develops the theory of infinite sequences and series from its beginnings to a point where the reader will be in a position to investigate more advanced stages on his own. The foundations of the theory are therefore presented with special care, while the developmental aspects are limited by the scope and purpose of the book. All definitions are clearly stated; all theorems are proved with enough detail to ma

  18. Tattoo reaction: Case series

    Directory of Open Access Journals (Sweden)

    Muneer Mohamed

    2018-04-01

    Full Text Available Tattoo is going to be a very common practice especially among young people and we are witnessing a gradual increase of numerous potential complications to tattoo placement which are often seen by physicians, but generally unknown to the public. The most common skin reactions to tattoo include a transient acute inflammatory reaction due to trauma of the skin with needles and medical complications such as superficial and deep local infections, systemic infections, allergic contact dermatitis, photodermatitis, granulomatous and lichenoid reactions, and skin diseases localized on tattooed area (eczema, psoriasis, lichen, and morphea. In this series we present three cases of tattoo reaction.

  19. Murderers: a personal series.

    Science.gov (United States)

    Parker, N

    1979-01-27

    One hundred people who were accused either of murder (70 persons) or of attempted murder (30 persons) in Queensland were personally examined by the writer. The methods, motives, and ways of prevention of homicide are discussed. A considerable preportion of murderers in this series were either mentally ill or severely emotionally disturbed at the time the crime was committed, and at least one in 10 of these murders could have been prevented. It is recommended that the treatment and assessment of potentially violent psychotic patients should be undertaken more carefully, and that the antipsychiatrist campaigns for the freedom of the individual should be tempered with a consideration for public safety.

  20. Introduction to Time Series Modeling

    CERN Document Server

    Kitagawa, Genshiro

    2010-01-01

    In time series modeling, the behavior of a certain phenomenon is expressed in relation to the past values of itself and other covariates. Since many important phenomena in statistical analysis are actually time series and the identification of conditional distribution of the phenomenon is an essential part of the statistical modeling, it is very important and useful to learn fundamental methods of time series modeling. Illustrating how to build models for time series using basic methods, "Introduction to Time Series Modeling" covers numerous time series models and the various tools f

  1. System design projects for undergraduate design education

    Science.gov (United States)

    Batill, S. M.; Pinkelman, J.

    1993-01-01

    Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

  2. Antiderivative Series for Differentiable Functions

    Science.gov (United States)

    Howard, Roy M.

    2004-01-01

    A series defining the antiderivative of an n th order differentiable function is defined. This series provides an explicit expression for the second part of the Fundamental Theorem of Calculus and can facilitate the establishment of new antiderivative functions.

  3. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  4. Harmonic Series Meets Fibonacci Sequence

    Science.gov (United States)

    Chen, Hongwei; Kennedy, Chris

    2012-01-01

    The terms of a conditionally convergent series may be rearranged to converge to any prescribed real value. What if the harmonic series is grouped into Fibonacci length blocks? Or the harmonic series is arranged in alternating Fibonacci length blocks? Or rearranged and alternated into separate blocks of even and odd terms of Fibonacci length?

  5. Globe: Lecture series

    CERN Multimedia

    2007-01-01

    The LHC: an accelerator of science This series of lectures is all about understanding the scientific and technological challenges of the phenomenal LHC project and assessing its innovations through their everyday applications. Come and take a sneak preview of the LHC! Communicate: the Grid, a computer of global dimensions François Grey, head of communication in CERN’s Information Technology Department How will it be possible for the 15 million billion bytes of data generated by the LHC every year to be handled and stored by a computer that doesn’t have to be the size of a skyscraper? The computer scientists have the answer: the Grid, which will harness the power of tens of thousands of computers all over the world by creating a network of computers and making them operate as one. >>> Lectures are free and require no specialist knowledge. In french. 
 >>> By reservation only: tel. +41 (0)22 767 76 76

  6. From Networks to Time Series

    Science.gov (United States)

    Shimada, Yutaka; Ikeguchi, Tohru; Shigehara, Takaomi

    2012-10-01

    In this Letter, we propose a framework to transform a complex network to a time series. The transformation from complex networks to time series is realized by the classical multidimensional scaling. Applying the transformation method to a model proposed by Watts and Strogatz [Nature (London) 393, 440 (1998)], we show that ring lattices are transformed to periodic time series, small-world networks to noisy periodic time series, and random networks to random time series. We also show that these relationships are analytically held by using the circulant-matrix theory and the perturbation theory of linear operators. The results are generalized to several high-dimensional lattices.

  7. The Prediction of Teacher Turnover Employing Time Series Analysis.

    Science.gov (United States)

    Costa, Crist H.

    The purpose of this study was to combine knowledge of teacher demographic data with time-series forecasting methods to predict teacher turnover. Moving averages and exponential smoothing were used to forecast discrete time series. The study used data collected from the 22 largest school districts in Iowa, designated as FACT schools. Predictions…

  8. Silverleaf: An Experimental Series in Support of Nightshade

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, Jeremy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bauer, Amy L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-23

    In this series, a prototype package was designed and fielded to address a major technical risk of Nightshade: A comprehensive suite of drives and diagnostics must fit within a small space. In addition, this series satisfies a milestone for the project.

  9. Portraits. Artists' Workshop Series.

    Science.gov (United States)

    King, Penny; Roundhill, Clare

    This instructional resource, designed to be used by and with elementary level students, presents six portraits by master artists from diverse cultures and historic periods, as starting points for exploring various artistic techniques. Images include: "Dead King Amenophis I" (Egyptian, 1050 B.C); "Head of Neptune" (Roman, 500…

  10. The Surtsey Magma Series.

    Science.gov (United States)

    Schipper, C Ian; Jakobsson, Sveinn P; White, James D L; Michael Palin, J; Bush-Marcinowski, Tim

    2015-06-26

    The volcanic island of Surtsey (Vestmannaeyjar, Iceland) is the product of a 3.5-year-long eruption that began in November 1963. Observations of magma-water interaction during pyroclastic episodes made Surtsey the type example of shallow-to-emergent phreatomagmatic eruptions. Here, in part to mark the 50(th) anniversary of this canonical eruption, we present previously unpublished major-element whole-rock compositions, and new major and trace-element compositions of sideromelane glasses in tephra collected by observers and retrieved from the 1979 drill core. Compositions became progressively more primitive as the eruption progressed, with abrupt changes corresponding to shifts between the eruption's four edifices. Trace-element ratios indicate that the chemical variation is best explained by mixing of different proportions of depleted ridge-like basalt, with ponded, enriched alkalic basalt similar to that of Iceland's Eastern Volcanic Zone; however, the systematic offset of Surtsey compositions to lower Nb/Zr than other Vestmannaeyjar lavas indicates that these mixing end members are as-yet poorly contained by compositions in the literature. As the southwestern-most volcano in the Vestmannaeyjar, the geochemistry of the Surtsey Magma Series exemplifies processes occurring within ephemeral magma bodies on the extreme leading edge of a propagating off-axis rift in the vicinity of the Iceland plume.

  11. Modelling bursty time series

    International Nuclear Information System (INIS)

    Vajna, Szabolcs; Kertész, János; Tóth, Bálint

    2013-01-01

    Many human-related activities show power-law decaying interevent time distribution with exponents usually varying between 1 and 2. We study a simple task-queuing model, which produces bursty time series due to the non-trivial dynamics of the task list. The model is characterized by a priority distribution as an input parameter, which describes the choice procedure from the list. We give exact results on the asymptotic behaviour of the model and we show that the interevent time distribution is power-law decaying for any kind of input distributions that remain normalizable in the infinite list limit, with exponents tunable between 1 and 2. The model satisfies a scaling law between the exponents of interevent time distribution (β) and autocorrelation function (α): α + β = 2. This law is general for renewal processes with power-law decaying interevent time distribution. We conclude that slowly decaying autocorrelation function indicates long-range dependence only if the scaling law is violated. (paper)

  12. Empirical research through design

    NARCIS (Netherlands)

    Keyson, D.V.; Bruns, M.

    2009-01-01

    This paper describes the empirical research through design method (ERDM), which differs from current approaches to research through design by enforcing the need for the designer, after a series of pilot prototype based studies, to a-priori develop a number of testable interaction design hypothesis

  13. From Fourier Series to Rapidly Convergent Series for Zeta(3)

    DEFF Research Database (Denmark)

    Scheufens, Ernst E

    2011-01-01

    The article presents a mathematical study which investigates the exact values of the Riemann zeta (ζ) function. It states that exact values can be determined from Fourier series for periodic versions of even power functions. It notes that using power series for logarithmic functions on this such ......The article presents a mathematical study which investigates the exact values of the Riemann zeta (ζ) function. It states that exact values can be determined from Fourier series for periodic versions of even power functions. It notes that using power series for logarithmic functions...

  14. Environmental Approaches to Prehistory/Archaeology. Activities Designed to Supplement a Course in North American Prehistory/Archaeology at the Junior High or High School Level. Curriculum Series, Number 2.

    Science.gov (United States)

    Carpenter, James C.; Fraser, Kathryn M.

    Presented are 17 activities designed to supplement junior or senior high school studies in prehistory and archaeology. Stressed throughout the manual is the changing relationship between humans and the environment. The learning experiences fall into three categories: (1) how we study prehistoric cultures, (2) how prehistoric peoples lived, and (3)…

  15. DOE handbook: Design considerations

    International Nuclear Information System (INIS)

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

  16. DOE handbook: Design considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

  17. Pneumatic Variable Series Elastic Actuator.

    Science.gov (United States)

    Zheng, Hao; Wu, Molei; Shen, Xiangrong

    2016-08-01

    Inspired by human motor control theory, stiffness control is highly effective in manipulation and human-interactive tasks. The implementation of stiffness control in robotic systems, however, has largely been limited to closed-loop control, and suffers from multiple issues such as limited frequency range, potential instability, and lack of contribution to energy efficiency. Variable-stiffness actuator represents a better solution, but the current designs are complex, heavy, and bulky. The approach in this paper seeks to address these issues by using pneumatic actuator as a variable series elastic actuator (VSEA), leveraging the compressibility of the working fluid. In this work, a pneumatic actuator is modeled as an elastic element with controllable stiffness and equilibrium point, both of which are functions of air masses in the two chambers. As such, for the implementation of stiffness control in a robotic system, the desired stiffness/equilibrium point can be converted to the desired chamber air masses, and a predictive pressure control approach is developed to control the timing of valve switching to obtain the desired air mass while minimizing control action. Experimental results showed that the new approach in this paper requires less expensive hardware (on-off valve instead of proportional valve), causes less control action in implementation, and provides good control performance by leveraging the inherent dynamics of the actuator.

  18. Time Series with Long Memory

    OpenAIRE

    西埜, 晴久

    2004-01-01

    The paper investigates an application of long-memory processes to economic time series. We show properties of long-memory processes, which are motivated to model a long-memory phenomenon in economic time series. An FARIMA model is described as an example of long-memory model in statistical terms. The paper explains basic limit theorems and estimation methods for long-memory processes in order to apply long-memory models to economic time series.

  19. Analysis of engineering cycles thermodynamics and fluid mechanics series

    CERN Document Server

    Haywood, R W

    1980-01-01

    Analysis of Engineering Cycles, Third Edition, deals principally with an analysis of the overall performance, under design conditions, of work-producing power plants and work-absorbing refrigerating and gas-liquefaction plants, most of which are either cyclic or closely related thereto. The book is organized into two parts, dealing first with simple power and refrigerating plants and then moving on to more complex plants. The principal modifications in this Third Edition arise from the updating and expansion of material on nuclear plants and on combined and binary plants. In view of increased

  20. Improved Titanium Billet Inspection Sensitivity through Optimized Phased Array Design, Part I: Design Technique, Modeling and Simulation

    International Nuclear Information System (INIS)

    Lupien, Vincent; Hassan, Waled; Dumas, Philippe

    2006-01-01

    Reductions in the beam diameter and pulse duration of focused ultrasound for titanium inspections are believed to result in a signal-to-noise ratio improvement for embedded defect detection. It has been inferred from this result that detection limits could be extended to smaller defects through a larger diameter, higher frequency transducer resulting in a reduced beamwidth and pulse duration. Using Continuum Probe Designer TM (Pat. Pending), a transducer array was developed for full coverage inspection of 8 inch titanium billets. The main challenge in realizing a large aperture phased array transducer for billet inspection is ensuring that the number of elements remains within the budget allotted by the driving electronics. The optimization technique implemented by Continuum Probe Designer TM yields an array with twice the aperture but the same number of elements as existing phased arrays for the same application. The unequal area element design was successfully manufactured and validated both numerically and experimentally. Part I of this two-part series presents the design, simulation and modeling steps, while Part II presents the experimental validation and comparative study to multizone

  1. Programmable pulse series generator for NMR relaxometer

    International Nuclear Information System (INIS)

    Stolbunov, R.N.; Chichikov, S.A.; Lundin, A.G.

    2005-01-01

    Paper describes a pulse series generator for NMR relaxometer. The operation mode is set on the basis of the PC program by the PCI bus in the internal memory. The design is based on two Altera Company MAX7000S and Cyclone family microcircuits using the Qartus II 4.0 software. The basic parameters are as follows: pulse minimum length - 50 ns, time resolution - 10 ns, pulse maximum number - 1024, number of controlled output channels - 8. The designed device as a part of the NMR hardware-software system enables to record, to process and to store the experiment results in the form of electronic document [ru

  2. A novel water quality data analysis framework based on time-series data mining.

    Science.gov (United States)

    Deng, Weihui; Wang, Guoyin

    2017-07-01

    The rapid development of time-series data mining provides an emerging method for water resource management research. In this paper, based on the time-series data mining methodology, we propose a novel and general analysis framework for water quality time-series data. It consists of two parts: implementation components and common tasks of time-series data mining in water quality data. In the first part, we propose to granulate the time series into several two-dimensional normal clouds and calculate the similarities in the granulated level. On the basis of the similarity matrix, the similarity search, anomaly detection, and pattern discovery tasks in the water quality time-series instance dataset can be easily implemented in the second part. We present a case study of this analysis framework on weekly Dissolve Oxygen time-series data collected from five monitoring stations on the upper reaches of Yangtze River, China. It discovered the relationship of water quality in the mainstream and tributary as well as the main changing patterns of DO. The experimental results show that the proposed analysis framework is a feasible and efficient method to mine the hidden and valuable knowledge from water quality historical time-series data. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Teaching for Engagement: Part 3: Designing for Active Learning

    Science.gov (United States)

    Hunter, William J.

    2015-01-01

    In the first two parts of this series, ("Teaching for Engagement: Part 1: Constructivist Principles, Case-Based Teaching, and Active Learning") and ("Teaching for Engagement: Part 2: Technology in the Service of Active Learning"), William J. Hunter sought to outline the theoretical rationale and research basis for such active…

  4. Classroom Issues with Series Tests

    Science.gov (United States)

    Sadek, Jawad; Euler, Russell

    2005-01-01

    We find infinite series in calculus to be one of the most confusing topics our students encounter. In this note, we look at some issues that our students find difficult or ambiguous involving the Ratio Test, the Root Test, and also the Alternating Series Test. We offer some suggestions and some examples, which could be a supplement to the set of…

  5. Convergence of a Catalan Series

    Science.gov (United States)

    Koshy, Thomas; Gao, Zhenguang

    2012-01-01

    This article studies the convergence of the infinite series of the reciprocals of the Catalan numbers. We extract the sum of the series as well as some related ones, illustrating the power of the calculus in the study of the Catalan numbers.

  6. Forecasting Cryptocurrencies Financial Time Series

    DEFF Research Database (Denmark)

    Catania, Leopoldo; Grassi, Stefano; Ravazzolo, Francesco

    2018-01-01

    This paper studies the predictability of cryptocurrencies time series. We compare several alternative univariate and multivariate models in point and density forecasting of four of the most capitalized series: Bitcoin, Litecoin, Ripple and Ethereum. We apply a set of crypto–predictors and rely...

  7. Designing end-user interfaces

    CERN Document Server

    Heaton, N

    1988-01-01

    Designing End-User Interfaces: State of the Art Report focuses on the field of human/computer interaction (HCI) that reviews the design of end-user interfaces.This compilation is divided into two parts. Part I examines specific aspects of the problem in HCI that range from basic definitions of the problem, evaluation of how to look at the problem domain, and fundamental work aimed at introducing human factors into all aspects of the design cycle. Part II consists of six main topics-definition of the problem, psychological and social factors, principles of interface design, computer intelligenc

  8. Time series analysis time series analysis methods and applications

    CERN Document Server

    Rao, Tata Subba; Rao, C R

    2012-01-01

    The field of statistics not only affects all areas of scientific activity, but also many other matters such as public policy. It is branching rapidly into so many different subjects that a series of handbooks is the only way of comprehensively presenting the various aspects of statistical methodology, applications, and recent developments. The Handbook of Statistics is a series of self-contained reference books. Each volume is devoted to a particular topic in statistics, with Volume 30 dealing with time series. The series is addressed to the entire community of statisticians and scientists in various disciplines who use statistical methodology in their work. At the same time, special emphasis is placed on applications-oriented techniques, with the applied statistician in mind as the primary audience. Comprehensively presents the various aspects of statistical methodology Discusses a wide variety of diverse applications and recent developments Contributors are internationally renowened experts in their respect...

  9. Osseous genioplasty: A case series

    Science.gov (United States)

    Deshpande, Sanjeev N.; Munoli, Amarnath V.

    2011-01-01

    Introduction: The chin (mentum) is vital to the human facial morphology as it contributes to the facial aesthetics and harmony both on frontal and lateral views. Osseous genioplasty, the alteration of the chin through skeletal modification, can lead to significant enhancement of the overall facial profile. Aim and Study Design: A case series was designed to study the long-term results of osseous genioplasty in Indian patients with regard to patient satisfaction, complications, and long-term stability. Materials and Methods: All subjects who underwent osseous genioplasty either alone or as a component of orthognathic surgery between January 1992 and December 2010, with a minimum follow-up of 2 years, were included. The genioplasty was performed using standard protocols of assessment and execution. Post-operative evaluation included patient satisfaction, complications and radiological evidence of long-term stability. A comprehensive score was formulated for the purpose of the study. Results: Thirty-seven subjects underwent osseous genioplasty with at least 2 years of follow-up in the study period. This included 17 male and 20 female subjects, with a mean age of 22.8 years (15-52 years) and a mean follow-up of 3 years 4 months (2 years to 4 years and 11 months). Nineteen subjects underwent isolated genioplasty while 18 underwent genioplasty as a part of orthognathic surgery. The procedures included advancement (22), pushback (9), side-to-side (4) and vertical reduction (2) genioplasty. Thirty-six subjects (97.3%) were extremely pleased with the results with only one subject expressing reservations, without, however, demanding any further procedure. There were no significant complications. The osteotomised segment was well maintained in its new position with good bony union and minimal resorption. Overall, 35 (94.6%) cases had excellent results and 2 (4.4%) cases had good results, according to the comprehensive score. Conclusions: Osseous genioplasty is a safe and

  10. Osseous genioplasty: A case series

    Directory of Open Access Journals (Sweden)

    Sanjeev N Deshpande

    2011-01-01

    Full Text Available Introduction: The chin (mentum is vital to the human facial morphology as it contributes to the facial aesthetics and harmony both on frontal and lateral views. Osseous genioplasty, the alteration of the chin through skeletal modification, can lead to significant enhancement of the overall facial profile. Aim and Study Design: A case series was designed to study the long-term results of osseous genioplasty in Indian patients with regard to patient satisfaction, complications, and long-term stability. Materials and Methods: All subjects who underwent osseous genioplasty either alone or as a component of orthognathic surgery between January 1992 and December 2010, with a minimum follow-up of 2 years, were included. The genioplasty was performed using standard protocols of assessment and execution. Post-operative evaluation included patient satisfaction, complications and radiological evidence of long-term stability. A comprehensive score was formulated for the purpose of the study. Results: Thirty-seven subjects underwent osseous genioplasty with at least 2 years of follow-up in the study period. This included 17 male and 20 female subjects, with a mean age of 22.8 years (15-52 years and a mean follow-up of 3 years 4 months (2 years to 4 years and 11 months. Nineteen subjects underwent isolated genioplasty while 18 underwent genioplasty as a part of orthognathic surgery. The procedures included advancement (22, pushback (9, side-to-side (4 and vertical reduction (2 genioplasty.Thirty-six subjects (97.3% were extremely pleased with the results with only one subject expressing reservations, without, however, demanding any further procedure. There were no significant complications. The osteotomised segment was well maintained in its new position with good bony union and minimal resorption. Overall, 35 (94.6% cases had excellent results and 2 (4.4% cases had good results, according to the comprehensive score. Conclusions: Osseous genioplasty is a safe

  11. Summable series and convergence factors

    CERN Document Server

    Moore, Charles N

    1938-01-01

    Fairly early in the development of the theory of summability of divergent series, the concept of convergence factors was recognized as of fundamental importance in the subject. One of the pioneers in this field was C. N. Moore, the author of the book under review.... Moore classifies convergence factors into two types. In type I he places the factors which have only the property that they preserve convergence for a convergent series or produce convergence for a summable series. In type II he places the factors which not only maintain or produce convergence but have the additional property that

  12. Fourier series and orthogonal polynomials

    CERN Document Server

    Jackson, Dunham

    2004-01-01

    This text for undergraduate and graduate students illustrates the fundamental simplicity of the properties of orthogonal functions and their developments in related series. Starting with a definition and explanation of the elements of Fourier series, the text follows with examinations of Legendre polynomials and Bessel functions. Boundary value problems consider Fourier series in conjunction with Laplace's equation in an infinite strip and in a rectangle, with a vibrating string, in three dimensions, in a sphere, and in other circumstances. An overview of Pearson frequency functions is followe

  13. Time series with tailored nonlinearities

    Science.gov (United States)

    Räth, C.; Laut, I.

    2015-10-01

    It is demonstrated how to generate time series with tailored nonlinearities by inducing well-defined constraints on the Fourier phases. Correlations between the phase information of adjacent phases and (static and dynamic) measures of nonlinearities are established and their origin is explained. By applying a set of simple constraints on the phases of an originally linear and uncorrelated Gaussian time series, the observed scaling behavior of the intensity distribution of empirical time series can be reproduced. The power law character of the intensity distributions being typical for, e.g., turbulence and financial data can thus be explained in terms of phase correlations.

  14. Models for dependent time series

    CERN Document Server

    Tunnicliffe Wilson, Granville; Haywood, John

    2015-01-01

    Models for Dependent Time Series addresses the issues that arise and the methodology that can be applied when the dependence between time series is described and modeled. Whether you work in the economic, physical, or life sciences, the book shows you how to draw meaningful, applicable, and statistically valid conclusions from multivariate (or vector) time series data.The first four chapters discuss the two main pillars of the subject that have been developed over the last 60 years: vector autoregressive modeling and multivariate spectral analysis. These chapters provide the foundational mater

  15. Reliability allocation problem in a series-parallel system

    International Nuclear Information System (INIS)

    Yalaoui, Alice; Chu, Chengbin; Chatelet, Eric

    2005-01-01

    In order to improve system reliability, designers may introduce in a system different technologies in parallel. When each technology is composed of components in series, the configuration belongs to the series-parallel systems. This type of system has not been studied as much as the parallel-series architecture. There exist no methods dedicated to the reliability allocation in series-parallel systems with different technologies. We propose in this paper theoretical and practical results for the allocation problem in a series-parallel system. Two resolution approaches are developed. Firstly, a one stage problem is studied and the results are exploited for the multi-stages problem. A theoretical condition for obtaining the optimal allocation is developed. Since this condition is too restrictive, we secondly propose an alternative approach based on an approximated function and the results of the one-stage study. This second approach is applied to numerical examples

  16. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... and what other conditions are associated with RA. Learning more about your condition will allow you to ... Arthritis Educational Video Series Psoriatic Arthritis 101 2010 E.S.C.A.P.E. Study Patient Update Transitioning ...

  17. Clustering of financial time series

    Science.gov (United States)

    D'Urso, Pierpaolo; Cappelli, Carmela; Di Lallo, Dario; Massari, Riccardo

    2013-05-01

    This paper addresses the topic of classifying financial time series in a fuzzy framework proposing two fuzzy clustering models both based on GARCH models. In general clustering of financial time series, due to their peculiar features, needs the definition of suitable distance measures. At this aim, the first fuzzy clustering model exploits the autoregressive representation of GARCH models and employs, in the framework of a partitioning around medoids algorithm, the classical autoregressive metric. The second fuzzy clustering model, also based on partitioning around medoids algorithm, uses the Caiado distance, a Mahalanobis-like distance, based on estimated GARCH parameters and covariances that takes into account the information about the volatility structure of time series. In order to illustrate the merits of the proposed fuzzy approaches an application to the problem of classifying 29 time series of Euro exchange rates against international currencies is presented and discussed, also comparing the fuzzy models with their crisp version.

  18. "Feeling" Series and Parallel Resistances.

    Science.gov (United States)

    Morse, Robert A.

    1993-01-01

    Equipped with drinking straws and stirring straws, a teacher can help students understand how resistances in electric circuits combine in series and in parallel. Follow-up suggestions are provided. (ZWH)

  19. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic Arthritis 101 ... Patient to an Adult Rheumatologist Drug Information for Patients Arthritis Drug Information Sheets Benefits and Risks of ...

  20. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+ TM Standard Design

  1. RUVIVAL Publication Series Volume 3

    OpenAIRE

    Behrendt, Joachim; Fröndhoff, Dario; Munoz Ardila, Andrea; Orlina, Maria Monina; Rueda Morales, Máryeluz; Schaldach, Ruth; Schaldach, Ruth; Otterpohl, Ralf

    2018-01-01

    RUVIVAL Publication Series is a compilation of literature reviews on topics concerned with the revitalisation of rural areas. RUVIVAL Publication Series is part of the e-learning project RUVIVAL and each of the three contributions in this publication is connected to further interactive multimedia material, which can be reached under www.ruvival.de. The first literature review is concerned with urine utilisation as a fertiliser in agriculture. Urine contains four important nutrients for pla...

  2. Forecasting Cryptocurrencies Financial Time Series

    OpenAIRE

    Catania, Leopoldo; Grassi, Stefano; Ravazzolo, Francesco

    2018-01-01

    This paper studies the predictability of cryptocurrencies time series. We compare several alternative univariate and multivariate models in point and density forecasting of four of the most capitalized series: Bitcoin, Litecoin, Ripple and Ethereum. We apply a set of crypto–predictors and rely on Dynamic Model Averaging to combine a large set of univariate Dynamic Linear Models and several multivariate Vector Autoregressive models with different forms of time variation. We find statistical si...

  3. Operation of multiple superconducting energy doubler magnets in series

    International Nuclear Information System (INIS)

    Kalbfleisch, G.; Limon, P.J.; Rode, C.

    1977-01-01

    In order to understand the operational characteristics of the Energy Doubler, a series of experiments were begun which were designed to be a practical test of running superconducting accelerator magnets in series. Two separate tests in which two Energy Doubler dipoles were powered in series are described. Of particular interest are the static losses of the cryostats and the behavior of the coils and cryostats during quenches. The results of the tests show that Energy Doubler magnets can be safely operated near their short sample limit, and that the various safety devices used are adequate to protect the coils and the cryostats from damage

  4. Scaling properties of Polish rain series

    Science.gov (United States)

    Licznar, P.

    2009-04-01

    implementation of double trace moment method allowed for estimation of local universal multifractal rainfall parameters (α=0.69; C1=0.34; H=-0.01). The research proved the fractal character of rainfall process support and multifractal character of the rainfall intensity values variability among analyzed time series. It is believed that scaling of local Wroclaw's rainfalls for timescales at the range from 24 hours up to 5 minutes opens the door for future research concerning for example random cascades implementation for daily precipitation totals disaggregation for smaller time intervals. The results of such a random cascades functioning in a form of 5 minute artificial rainfall scenarios could be of great practical usability for needs of urban hydrology, and design and hydrodynamic modeling of storm water and combined sewage conveyance systems.

  5. Stochastic models for time series

    CERN Document Server

    Doukhan, Paul

    2018-01-01

    This book presents essential tools for modelling non-linear time series. The first part of the book describes the main standard tools of probability and statistics that directly apply to the time series context to obtain a wide range of modelling possibilities. Functional estimation and bootstrap are discussed, and stationarity is reviewed. The second part describes a number of tools from Gaussian chaos and proposes a tour of linear time series models. It goes on to address nonlinearity from polynomial or chaotic models for which explicit expansions are available, then turns to Markov and non-Markov linear models and discusses Bernoulli shifts time series models. Finally, the volume focuses on the limit theory, starting with the ergodic theorem, which is seen as the first step for statistics of time series. It defines the distributional range to obtain generic tools for limit theory under long or short-range dependences (LRD/SRD) and explains examples of LRD behaviours. More general techniques (central limit ...

  6. Using forbidden ordinal patterns to detect determinism in irregularly sampled time series.

    Science.gov (United States)

    Kulp, C W; Chobot, J M; Niskala, B J; Needhammer, C J

    2016-02-01

    It is known that when symbolizing a time series into ordinal patterns using the Bandt-Pompe (BP) methodology, there will be ordinal patterns called forbidden patterns that do not occur in a deterministic series. The existence of forbidden patterns can be used to identify deterministic dynamics. In this paper, the ability to use forbidden patterns to detect determinism in irregularly sampled time series is tested on data generated from a continuous model system. The study is done in three parts. First, the effects of sampling time on the number of forbidden patterns are studied on regularly sampled time series. The next two parts focus on two types of irregular-sampling, missing data and timing jitter. It is shown that forbidden patterns can be used to detect determinism in irregularly sampled time series for low degrees of sampling irregularity (as defined in the paper). In addition, comments are made about the appropriateness of using the BP methodology to symbolize irregularly sampled time series.

  7. Series

    Indian Academy of Sciences (India)

    Prakash

    (American) English two years later (Wollman and Jacob. 1961). The emergence of ... Words have an important role in scientific knowledge. According to the ... we lack the right words to describe them” (quoted in Jacob et al. 1953). There is a ...

  8. Series

    Indian Academy of Sciences (India)

    Madhu

    2006-07-31

    Jul 31, 2006 ... By comparison, the fall in temperature with depth (and ... gases and of ballast and buoyancy control. ... to an old-fashioned diving bell, with air that it carries down ..... Working in Ghana, Stride (1955) noticed that adults of.

  9. Diophantine approximation and Dirichlet series

    CERN Document Server

    Queffélec, Hervé

    2013-01-01

    This self-contained book will benefit beginners as well as researchers. It is devoted to Diophantine approximation, the analytic theory of Dirichlet series, and some connections between these two domains, which often occur through the Kronecker approximation theorem. Accordingly, the book is divided into seven chapters, the first three of which present tools from commutative harmonic analysis, including a sharp form of the uncertainty principle, ergodic theory and Diophantine approximation to be used in the sequel. A presentation of continued fraction expansions, including the mixing property of the Gauss map, is given. Chapters four and five present the general theory of Dirichlet series, with classes of examples connected to continued fractions, the famous Bohr point of view, and then the use of random Dirichlet series to produce non-trivial extremal examples, including sharp forms of the Bohnenblust-Hille theorem. Chapter six deals with Hardy-Dirichlet spaces, which are new and useful Banach spaces of anal...

  10. Volterra Series Based Distortion Effect

    DEFF Research Database (Denmark)

    Agerkvist, Finn T.

    2010-01-01

    A large part of the characteristic sound of the electric guitar comes from nonlinearities in the signal path. Such nonlinearities may come from the input- or output-stage of the amplier, which is often equipped with vacuum tubes or a dedicated distortion pedal. In this paper the Volterra series...... expansion for non linear systems is investigated with respect to generating good distortion. The Volterra series allows for unlimited adjustment of the level and frequency dependency of each distortion component. Subjectively relevant ways of linking the dierent orders are discussed....

  11. Connected to TV series: Quantifying series watching engagement.

    Science.gov (United States)

    Tóth-Király, István; Bőthe, Beáta; Tóth-Fáber, Eszter; Hága, Győző; Orosz, Gábor

    2017-12-01

    Background and aims Television series watching stepped into a new golden age with the appearance of online series. Being highly involved in series could potentially lead to negative outcomes, but the distinction between highly engaged and problematic viewers should be distinguished. As no appropriate measure is available for identifying such differences, a short and valid measure was constructed in a multistudy investigation: the Series Watching Engagement Scale (SWES). Methods In Study 1 (N Sample1  = 740 and N Sample2  = 740), exploratory structural equation modeling and confirmatory factor analysis were used to identify the most important facets of series watching engagement. In Study 2 (N = 944), measurement invariance of the SWES was investigated between males and females. In Study 3 (N = 1,520), latent profile analysis (LPA) was conducted to identify subgroups of viewers. Results Five factors of engagement were identified in Study 1 that are of major relevance: persistence, identification, social interaction, overuse, and self-development. Study 2 supported the high levels of equivalence between males and females. In Study 3, three groups of viewers (low-, medium-, and high-engagement viewers) were identified. The highly engaged at-risk group can be differentiated from the other two along key variables of watching time and personality. Discussion The present findings support the overall validity, reliability, and usefulness of the SWES and the results of the LPA showed that it might be useful to identify at-risk viewers before the development of problematic use.

  12. Real Rainfall Time Series for Storm Sewer Design

    DEFF Research Database (Denmark)

    Larsen, Torben

    1981-01-01

    to a storm sewer system. The output of the simulation is the frequency distribution of the peak flow, overflow volume etc. from the overflow or the retention storage. The parameters in the transfer model are found either from rainfall/runoff measurements in the catchment or from one or more simulations...

  13. Engineering Design Handbook: Environmental Series. Part Two. Natural Environmental Factors

    Science.gov (United States)

    1975-04-01

    N Polyacrylic Silicone the skin and structure of the item. If, for example, the thermal capacity and heat trans- fer capabilities of a piece of ...cell used for the unknown sample. Cell A contains sea water of known chlorinity or a standard potassium chloride solution of approximately the same...modification of it. This consisted of hanging paper or cloth that had been dipped in a solution of potassium iodide and starch in the air for a

  14. Engineering Design Handbook: Environmental Series. Part Three. Induced Environmental Factors

    Science.gov (United States)

    1976-01-20

    environmental factors. Rain will wash many pollutants from the atmosphere or winds will disperse them; rain or humidity will sup- press sand and dust...atmosphere (Ref. 11). (4) Air movement. Air movement serves to disperse 2-55 AMCP 70G-117 pollutants throughout the atmosphere. Airspeed and...CaCCL MgC03 MgCO^ Pure clay, kaolin , china clay Al203-2Si02.2H20 sand or dust environment includes (1) concentration (count or weight), (2

  15. Design Games for In-Situ Design

    DEFF Research Database (Denmark)

    Kristiansen, Erik

    2013-01-01

    The mobile culture has spawned a host of context-based products, like location-based and tag-based applications. This presents a new challenge for the designer. There is a need of design methods that acknowledge the context and allows it to influence the design ideas. This article focuses...... on a design problem where an in-situ design practice may further the early design process: the case of designing a pervasive game. Pervasive games are computer games, played using the city as a game board and often using mobile phones with GPS. Some contextual design methods exist, but we propose an approach...... sitestorming, is based on a game using Situationistic individual exploration of the site and different types of game cards, followed by a joint evaluation of the generated ideas. A series of evaluations showed that the designers found the method enjoyable to use, that the method motivated idea generation...

  16. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patients from Johns Hopkins Stategies to Increase your Level of Physical Activity Role of Body Weight in Osteoarthritis Educational Videos for Patients Rheumatoid Arthritis Educational Video Series Psoriatic Arthritis 101 2010 E.S.C.A.P.E. Study Patient Update Transitioning the JRA ...

  17. FOURIER SERIES MODELS THROUGH TRANSFORMATION

    African Journals Online (AJOL)

    DEPT

    monthly temperature data (1996 – 2005) collected from the National Root ... KEY WORDS: Fourier series, square transformation, multiplicative model, ... fluctuations or movements are often periodic(Ekpeyong,2005). .... significant trend or not, if the trend is not significant, the grand mean may be used as an estimate of trend.

  18. Integer-valued time series

    NARCIS (Netherlands)

    van den Akker, R.

    2007-01-01

    This thesis adresses statistical problems in econometrics. The first part contributes statistical methodology for nonnegative integer-valued time series. The second part of this thesis discusses semiparametric estimation in copula models and develops semiparametric lower bounds for a large class of

  19. Locations in television drama series

    DEFF Research Database (Denmark)

    Waade, Anne Marit

    in the extra bonus material (Gray, 2010; Waade, 2013), and film tours and film apps become part of the television series’ trans-media franchise (Reijnders, 2011; Thompson, 2007). Location has so far been a practical term describing the place where the series is shot. Ellis (1992) used to see location...

  20. Bell numbers, determinants and series

    Indian Academy of Sciences (India)

    In this article, we study Bell numbers and Uppuluri Carpenter numbers. We obtain various expressions and relations between them. These include polynomial recurrences and expressions as determinants of certain matrices of binomial coefficients. Keywords. p-adic series; Bell numbers. 1. Introduction. Bell numbers, Bn [2] ...

  1. Sums of Generalized Harmonic Series

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 9. Sums of Generalized Harmonic Series: For Kids from Five to Fifteen. Zurab Silagadze. General Article Volume 20 Issue 9 September 2015 pp 822-843. Fulltext. Click here to view fulltext PDF. Permanent link:

  2. Teen Addiction. Current Controversies Series.

    Science.gov (United States)

    Winters, Paul A., Ed.

    The Current Controversies series explores social, political, and economic controversies that dominate the national and international scenes today from a variety of perspectives. Recent surveys have shown that, after years of decline, drug use among teenagers has increased during the 1990s, and that alcohol and tobacco use have remained…

  3. Lower GI Series (Barium Enema)

    Science.gov (United States)

    ... uses x-rays and a chalky liquid called barium to view your large intestine . The barium will make your large intestine more visible on ... single-contrast lower GI series, which uses only barium a double-contrast or air-contrast lower GI ...

  4. Interracial America. Opposing Viewpoints Series.

    Science.gov (United States)

    Szumski, Bonnie, Ed.

    Books in the Opposing Viewpoints Series present debates about current issues that can be used to teach critical reading and thinking skills. The varied opinions in each book examine different aspects of a single issue. The topics covered in this volume explore the racial and ethnic tensions that concern many Americans today. The racial divide…

  5. Spectroscopy, Understanding the Atom Series.

    Science.gov (United States)

    Hellman, Hal

    This booklet is one of the "Understanding the Atom" Series. The science of spectroscopy is presented by a number of topics dealing with (1) the uses of spectroscopy, (2) its origin and background, (3) the basic optical systems of spectroscopes, spectrometers, and spectrophotometers, (4) the characteristics of wave motion, (5) the…

  6. Roller bearing geometry design

    Science.gov (United States)

    Savage, M.; Pinkston, B. H. W.

    1976-01-01

    A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

  7. International Work-Conference on Time Series

    CERN Document Server

    Pomares, Héctor; Valenzuela, Olga

    2017-01-01

    This volume of selected and peer-reviewed contributions on the latest developments in time series analysis and forecasting updates the reader on topics such as analysis of irregularly sampled time series, multi-scale analysis of univariate and multivariate time series, linear and non-linear time series models, advanced time series forecasting methods, applications in time series analysis and forecasting, advanced methods and online learning in time series and high-dimensional and complex/big data time series. The contributions were originally presented at the International Work-Conference on Time Series, ITISE 2016, held in Granada, Spain, June 27-29, 2016. The series of ITISE conferences provides a forum for scientists, engineers, educators and students to discuss the latest ideas and implementations in the foundations, theory, models and applications in the field of time series analysis and forecasting.  It focuses on interdisciplinary and multidisciplinary rese arch encompassing the disciplines of comput...

  8. Design Specification and Verification

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1997-01-01

    This is chapter 7 in an edited book that presents a number of issues of fundamental importance for the design of integrated hardware software products such as embedded, communication, and multimedia systems. This book is the result of a series of Ph.D. courses on hardware/software co-design held...

  9. Is Design a Plus?

    DEFF Research Database (Denmark)

    Poulsen, Søren Bolvig; Vistisen, Peter; Gudiksen, Sune Klok

    2017-01-01

    . In this paper, we will discuss an epistemological dilemma that occurred when implementing design into established humanistic education at Aalborg University, which is a problems-based learning (PBL) university. From our empirical observations, having implemented design into the humanistic curriculum, a series...

  10. Case series in cognitive neuropsychology: promise, perils, and proper perspective.

    Science.gov (United States)

    Rapp, Brenda

    2011-10-01

    Schwartz and Dell (2010) advocated for a major role for case series investigations in cognitive neuropsychology. They defined the key features of this approach and presented a number of arguments and examples illustrating the benefits of case series studies and their contribution to computational cognitive neuropsychology. In the Special Issue on "Case Series in Cognitive Neuropsychology" there are six commentaries on Schwartz and Dell as well as a response to the six commentaries by Dell and Schwartz (2011 this issue). In this paper, I provide a brief summary of the key points made in Schwartz and Dell, and I review the promise and perils of case series design as revealed by the six commentaries. I conclude by placing the set of papers within a broader perspective, providing some clarification of the historical record on case series and single-case approaches, raising some cautionary notes for case series studies and situating both case series and single-case approaches within the larger context of theory development in the cognitive sciences.

  11. Case Series in Cognitive Neuropsychology: Promise, Perils and Proper Perspective

    Science.gov (United States)

    Rapp, Brenda

    2012-01-01

    Schwartz & Dell (2010) advocated for a major role for case series investigations in cognitive neuropsychology. They defined the key features of this approach and presented a number of arguments and examples illustrating the benefits of case series studies and their contribution to computational cognitive neuropsychology. In the Special Issue on “Case Series in Cognitive Neuropsychology” there are six commentaries on Schwartz and Dell (2010) as well as a response to the six commentaries by Dell and Schwartz. In this paper, I provide a brief summary of the key points made in Schwartz and Dell (2010) and I review the promise and perils of case series design as revealed by the six commentaries. I conclude by placing the set of papers within a broader perspective, providing some clarification of the historical record on case series and single case approaches, raising some cautionary notes for case series studies and situating both case series and single case approaches within the larger context of theory development in the cognitive sciences. PMID:22746685

  12. Time-series-analysis techniques applied to nuclear-material accounting

    International Nuclear Information System (INIS)

    Pike, D.H.; Morrison, G.W.; Downing, D.J.

    1982-05-01

    This document is designed to introduce the reader to the applications of Time Series Analysis techniques to Nuclear Material Accountability data. Time series analysis techniques are designed to extract information from a collection of random variables ordered by time by seeking to identify any trends, patterns, or other structure in the series. Since nuclear material accountability data is a time series, one can extract more information using time series analysis techniques than by using other statistical techniques. Specifically, the objective of this document is to examine the applicability of time series analysis techniques to enhance loss detection of special nuclear materials. An introductory section examines the current industry approach which utilizes inventory differences. The error structure of inventory differences is presented. Time series analysis techniques discussed include the Shewhart Control Chart, the Cumulative Summation of Inventory Differences Statistics (CUSUM) and the Kalman Filter and Linear Smoother

  13. Summability of alterations of convergent series

    Directory of Open Access Journals (Sweden)

    T. A. Keagy

    1981-01-01

    Full Text Available The effect of splitting, rearrangement, and grouping series alterations on the summability of a convergent series by ℓ−ℓ and cs−cs matrix methods is studied. Conditions are determined that guarantee the existence of alterations that are transformed into divergent series and into series with preassigned sums.

  14. Multiple Indicator Stationary Time Series Models.

    Science.gov (United States)

    Sivo, Stephen A.

    2001-01-01

    Discusses the propriety and practical advantages of specifying multivariate time series models in the context of structural equation modeling for time series and longitudinal panel data. For time series data, the multiple indicator model specification improves on classical time series analysis. For panel data, the multiple indicator model…

  15. The Timeseries Toolbox - A Web Application to Enable Accessible, Reproducible Time Series Analysis

    Science.gov (United States)

    Veatch, W.; Friedman, D.; Baker, B.; Mueller, C.

    2017-12-01

    The vast majority of data analyzed by climate researchers are repeated observations of physical process or time series data. This data lends itself of a common set of statistical techniques and models designed to determine trends and variability (e.g., seasonality) of these repeated observations. Often, these same techniques and models can be applied to a wide variety of different time series data. The Timeseries Toolbox is a web application designed to standardize and streamline these common approaches to time series analysis and modeling with particular attention to hydrologic time series used in climate preparedness and resilience planning and design by the U. S. Army Corps of Engineers. The application performs much of the pre-processing of time series data necessary for more complex techniques (e.g. interpolation, aggregation). With this tool, users can upload any dataset that conforms to a standard template and immediately begin applying these techniques to analyze their time series data.

  16. Solutions of diffusion equations in two-dimensional cylindrical geometry by series expansions

    International Nuclear Information System (INIS)

    Ohtani, Nobuo

    1976-01-01

    A solution of the multi-group multi-regional diffusion equation in two-dimensional cylindrical (rho-z) geometry is obtained in the form of a regionwise double series composed of Bessel and trigonometrical functions. The diffusion equation is multiplied by weighting functions, which satisfy the homogeneous part of the diffusion equation, and the products are integrated over the region for obtaining the equations to determine the fluxes and their normal derivatives at the region boundaries. Multiplying the diffusion equation by each function of the set used for the flux expansion, then integrating the products, the coefficients of the double series of the flux inside each region are calculated using the boundary values obtained above. Since the convergence of the series thus obtained is slow especially near the region boundaries, a method for improving the convergence has been developed. The double series of the flux is separated into two parts. The normal derivative at the region boundary of the first part is zero, and that of the second part takes the value which is obtained in the first stage of this method. The second part is replaced by a continuous function, and the flux is represented by the sum of the continuous function and the double series. A sample critical problem of a two-group two-region system is numerically studied. The results show that the present method yields very accurately the flux integrals in each region with only a small number of expansion terms. (auth.)

  17. Safety, tolerability, pharmacokinetics, and activity of the novel long-acting antimalarial DSM265: a two-part first-in-human phase 1a/1b randomised study.

    Science.gov (United States)

    McCarthy, James S; Lotharius, Julie; Rückle, Thomas; Chalon, Stephan; Phillips, Margaret A; Elliott, Suzanne; Sekuloski, Silvana; Griffin, Paul; Ng, Caroline L; Fidock, David A; Marquart, Louise; Williams, Noelle S; Gobeau, Nathalie; Bebrevska, Lidiya; Rosario, Maria; Marsh, Kennan; Möhrle, Jörg J

    2017-06-01

    DSM265 is a novel antimalarial that inhibits plasmodial dihydroorotate dehydrogenase, an enzyme essential for pyrimidine biosynthesis. We investigated the safety, tolerability, and pharmacokinetics of DSM265, and tested its antimalarial activity. Healthy participants aged 18-55 years were enrolled in a two-part study: part 1, a single ascending dose (25-1200 mg), double-blind, randomised, placebo-controlled study, and part 2, an open-label, randomised, active-comparator controlled study, in which participants were inoculated with Plasmodium falciparum induced blood-stage malaria (IBSM) and treated with DSM265 (150 mg) or mefloquine (10 mg/kg). Primary endpoints were DSM265 safety, tolerability, and pharmacokinetics. Randomisation lists were created using a validated, automated system. Both parts were registered with the Australian New Zealand Clinical Trials Registry, number ACTRN12613000522718 (part 1) and number ACTRN12613000527763 (part 2). In part 1, 73 participants were enrolled between April 12, 2013, and July 14, 2015 (DSM265, n=55; placebo, n=18). In part 2, nine participants were enrolled between Sept 30 and Nov 25, 2013 (150 mg DSM265, n=7; 10 mg/kg mefloquine, n=2). In part 1, 117 adverse events were reported; no drug-related serious or severe events were reported. The most common drug-related adverse event was headache. The mean DSM265 peak plasma concentration (C max ) ranged between 1310 ng/mL and 34 800 ng/mL and was reached in a median time (t max ) between 1·5 h and 4 h, with a mean elimination half-life between 86 h and 118 h. In part 2, the log 10 parasite reduction ratio at 48 h in the DSM265 (150 mg) group was 1·55 (95% CI 1·42-1·67) and in the mefloquine (10 mg/kg) group was 2·34 (2·17-2·52), corresponding to a parasite clearance half-life of 9·4 h (8·7-10·2) and 6·2 h (5·7-6·7), respectively. The median minimum inhibitory concentration of DSM265 in blood was estimated as 1040 ng/mL (range 552-1500), resulting in a predicted

  18. Heat recovery system series arrangements

    Science.gov (United States)

    Kauffman, Justin P.; Welch, Andrew M.; Dawson, Gregory R.; Minor, Eric N.

    2017-11-14

    The present disclosure is directed to heat recovery systems that employ two or more organic Rankine cycle (ORC) units disposed in series. According to certain embodiments, each ORC unit includes an evaporator that heats an organic working fluid, a turbine generator set that expands the working fluid to generate electricity, a condenser that cools the working fluid, and a pump that returns the working fluid to the evaporator. The heating fluid is directed through each evaporator to heat the working fluid circulating within each ORC unit, and the cooling fluid is directed through each condenser to cool the working fluid circulating within each ORC unit. The heating fluid and the cooling fluid flow through the ORC units in series in the same or opposite directions.

  19. Ramanujan summation of divergent series

    CERN Document Server

    Candelpergher, Bernard

    2017-01-01

    The aim of this monograph is to give a detailed exposition of the summation method that Ramanujan uses in Chapter VI of his second Notebook. This method, presented by Ramanujan as an application of the Euler-MacLaurin formula, is here extended using a difference equation in a space of analytic functions. This provides simple proofs of theorems on the summation of some divergent series. Several examples and applications are given. For numerical evaluation, a formula in terms of convergent series is provided by the use of Newton interpolation. The relation with other summation processes such as those of Borel and Euler is also studied. Finally, in the last chapter, a purely algebraic theory is developed that unifies all these summation processes. This monograph is aimed at graduate students and researchers who have a basic knowledge of analytic function theory.

  20. Generating series for GUE correlators

    Science.gov (United States)

    Dubrovin, Boris; Yang, Di

    2017-11-01

    We extend to the Toda lattice hierarchy the approach of Bertola et al. (Phys D Nonlinear Phenom 327:30-57, 2016; IMRN, 2016) to computation of logarithmic derivatives of tau-functions in terms of the so-called matrix resolvents of the corresponding difference Lax operator. As a particular application we obtain explicit generating series for connected GUE correlators. On this basis an efficient recursive procedure for computing the correlators in full genera is developed.

  1. Chernobyl: A series of mistakes

    International Nuclear Information System (INIS)

    Brunner, E.; Janssen, K.H.; Sontheimer, M.

    1986-01-01

    Chernobyl - does it mark the beginning of the end of nuclear energy. Or is it just a spectacular accident as the one at Harrisburg in 1979. Six months after the disaster in the Ukraine released the terrible radiation clouds, the article in hand starts a series intended to draw a balance: deadly experiments in an April night - damage all over Europe that sums up to billions - the Brokdorf nuclear power plant said to be the safest in the world. (orig.) [de

  2. Introduction of circuit design on RFID system

    International Nuclear Information System (INIS)

    Pak, Sunho

    2007-06-01

    This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

  3. Introduction of circuit design on RFID system

    Energy Technology Data Exchange (ETDEWEB)

    Pak, Sunho

    2007-06-15

    This is a case of research of Fujitsu company and design of basic circuit of electronic technique. It is composed of two parts. The first part deals with introduction of RFID system design, which lists basic knowledge of ubiquitous, glossary of high frequency, design of impedance matching circuit, RFID system, sorts and design of filter, modulator and a transmission and RFID system design. The second part deals with research and development of Fujitsu company, including RFID middle ware RFID CONNECT of Fujitsu, sensor network of Fujitsu and high handing technique of RFID system.

  4. Microprocessor Card for Cuban Series polarimeters Laserpol

    International Nuclear Information System (INIS)

    Arista Romeu, E.; Mora Mazorra, W.

    2012-01-01

    We present the design consists of a card based on a micro-processor 8-bit adds new software components and their basic living, which allow to deliver new services and expand the possibilities for use in other applications of the polarimeter LASERPOL series, as the polarimetric detection. Given the limitations of the original card it was necessary to introduce a series of changes that would allow to address new user requirements, and expand the possible applications of the instruments. This was done the expansion of the capacity of the EPROM and RAM memory, the decoder circuit was implemented memory map using a programmable integrated circuit, and introduced a real time clock with nonvolatile RAM, these features are exploited to the introduction of new features such as the realization of the polarimeter calibration by the user from a sample pattern or a calibration pattern used as a reference, and the incorporation of the time and date to the reports of measurements required industry for quality control processes. Card that is achieved along with the rest of the components is compatible with polarimeters LASERPOL 101M Series, 3M and LP4, pin to pin, which facilitates their incorporation into the polarimeters in operation in the industry 'in situ' replacement cards from previous models, allowing to extend the possibilities of statistical processing, precision and accuracy of the instruments. Improved measurements in the industry, resulting in significant savings by elimination of losses in production and raw materials. The improved response speed of reading the polarimeters LASERPOL Use and polarimetric detectors. (Author)

  5. Eisenstein series and string thresholds

    International Nuclear Information System (INIS)

    Obers, N.A.; Pioline, B.

    2000-01-01

    We investigate the relevance of Eisenstein series for representing certain G(Z)-invariant string theory amplitudes which receive corrections from BPS states only. G(Z) may stand for any of the mapping class, T-duality and U-duality groups Sl(d,Z), SO(d,d,Z) or E d+1(d+1) (Z) respectively. Using G(Z)-invariant mass formulae, we construct invariant modular functions on the symmetric space K backslash G(R) of non-compact type, with K the maximal compact subgroup of G(R), that generalize the standard non-holomorphic Eisenstein series arising in harmonic analysis on the fundamental domain of the Poincare upper half-plane. Comparing the asymptotics and eigenvalues of the Eisenstein series under second order differential operators with quantities arising in one- and g-loop string amplitudes, we obtain a manifestly T-duality invariant representation of the latter, conjecture their non-perturbative U-duality invariant extension, and analyze the resulting non-perturbative effects. This includes the R 4 and R 4 H -4 g -4 couplings in toroidal compactifications of M-theory to any dimension D≥4 and D≥6 respectively. (orig.)

  6. Hyperreal Numbers for Infinite Divergent Series

    OpenAIRE

    Bartlett, Jonathan

    2018-01-01

    Treating divergent series properly has been an ongoing issue in mathematics. However, many of the problems in divergent series stem from the fact that divergent series were discovered prior to having a number system which could handle them. The infinities that resulted from divergent series led to contradictions within the real number system, but these contradictions are largely alleviated with the hyperreal number system. Hyperreal numbers provide a framework for dealing with divergent serie...

  7. Modelling of series of types of automated trenchless works tunneling

    Science.gov (United States)

    Gendarz, P.; Rzasinski, R.

    2016-08-01

    Microtunneling is the newest method for making underground installations. Show method is the result of experience and methods applied in other, previous methods of trenchless underground works. It is considered reasonable to elaborate a series of types of construction of tunneling machines, to develop this particular earthworks method. There are many design solutions of machines, but the current goal is to develop non - excavation robotized machine. Erosion machines with main dimensions of the tunnels which are: 1600, 2000, 2500, 3150 are design with use of the computer aided methods. Series of types of construction of tunneling machines creating process was preceded by analysis of current state. The verification of practical methodology of creating the systematic part series was based on the designed erosion machines series of types. There were developed: method of construction similarity of the erosion machines, algorithmic methods of quantitative construction attributes variant analyzes in the I-DEAS advanced graphical program, relational and program parameterization. There manufacturing process of the parts will be created, which allows to verify the technological process on the CNC machines. The models of designed will be modified and the construction will be consulted with erosion machine users and manufacturers like: Tauber Rohrbau GmbH & Co.KG from Minster, OHL ZS a.s. from Brna,. The companies’ acceptance will result in practical verification by JUMARPOL company.

  8. Accounting Issues: An Essay Series. Part II--Accounts Receivable

    Science.gov (United States)

    Laux, Judith A.

    2007-01-01

    This is the second in a series of articles designed to help academics refocus the introductory accounting course on the theoretical underpinnings of accounting. Intended as a supplement for the principles course, this article connects the asset Accounts Receivable to the essential theoretical constructs, discusses the inherent tradeoffs and…

  9. Heavy Duty Tireman. Open Pit Mining Job Training Series.

    Science.gov (United States)

    McColman, Don

    This training outline for heavy duty tiremen, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for classroom…

  10. Front End Loader Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    Savilow, Bill

    This training outline for front end loader operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

  11. Track Dozer Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria.

    This training outline for track dozer operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

  12. Rotary Drill Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    Savilow, Bill

    This training outline for rotary drill operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

  13. Haulage Truck Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria.

    This training outline for haulage truck operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

  14. Grader Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    Savilow, Bill

    This training outline for grader operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for classroom…

  15. Rubber Tire Dozer Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    British Columbia Dept. of Education, Victoria.

    This training outline for rubber tire dozer operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

  16. The Blue Planet: Seas & Oceans. Young Discovery Library Series.

    Science.gov (United States)

    de Beauregard, Diane Costa

    This book is written for children ages 5 through 10. Part of a series designed to develop their curiosity, facinate them and educate them, this volume explores the physical and environmental characteristics of the world's oceans. Topics are: (1) human exploration; (2) the food chain; (3) coral reefs; (4) currents and tides; (5) waves; (6)…

  17. United States forest disturbance trends observed with landsat time series

    Science.gov (United States)

    Jeffrey G. Masek; Samuel N. Goward; Robert E. Kennedy; Warren B. Cohen; Gretchen G. Moisen; Karen Schleweiss; Chengquan. Huang

    2013-01-01

    Disturbance events strongly affect the composition, structure, and function of forest ecosystems; however, existing US land management inventories were not designed to monitor disturbance. To begin addressing this gap, the North American Forest Dynamics (NAFD) project has examined a geographic sample of 50 Landsat satellite image time series to assess trends in forest...

  18. Invasion Ecology. Student Edition. Cornell Scientific Inquiry Series.

    Science.gov (United States)

    Krasny, Marianne E.; Trautmann, Nancy; Carlsen, William; Cunningham, Christine

    This book contains the student edition of the Environmental Inquiry curriculum series developed at Cornell University. It is designed to teach learning skills for investigating the behaviors of non-native and native species and demonstrate how to apply scientific knowledge to solve real-life problems. This book focuses on strange intruders…

  19. Introduction to Concrete Reinforcing. Instructor Edition. Introduction to Construction Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This module on concrete reinforcing is one of a series of modules designed to teach basic skills necessary for entry-level employment in this field. This module contains three instructional units that cover the following topics: (1) concrete reinforcing materials; (2) concrete reinforcing tools; and (3) concrete reinforcing basic skills. Each…

  20. Shovel Operator. Open Pit Mining Job Training Series.

    Science.gov (United States)

    Hartley, Larry

    This training outline for shovel operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for classroom…

  1. Bears, Big and Little. Young Discovery Library Series.

    Science.gov (United States)

    Pfeffer, Pierre

    This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

  2. Intercultural Education Series. An Introduction to Selected Latin American Cultures.

    Science.gov (United States)

    Hubert, Frank W. R.; And Others

    This is the first publication in a series developed by the Programa de Educacion Interamericana designed to enrich and strengthen the knowledge and understanding of Texas teachers and students in the field of intercultural education, with particular reference to Mexico and the republics of Central and South America. The project hopes to produce a…

  3. A Series of Foundation Phase Dictionaries for a Multilingual ...

    African Journals Online (AJOL)

    The aim of this article is to reflect on the design and use of the Maskew Miller Longman series of dictionaries published in several different official languages of South Africa and aimed at learners in the foundation phase of primary school. It will be argued that when planning new dictionaries such as these, lexicographers ...

  4. Using Disks as Models for Proofs of Series

    Science.gov (United States)

    Somchaipeng, Tongta; Kruatong, Tussatrin; Panijpan, Bhinyo

    2012-01-01

    Exploring and deriving proofs of closed-form expressions for series can be fun for students. However, for some students, a physical representation of such problems is more meaningful. Various approaches have been designed to help students visualize squares of sums and sums of squares; these approaches may be arithmetic-algebraic or combinatorial…

  5. Reliability-Based Optimization of Series Systems of Parallel Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...

  6. Analysis and implementation of LLC-T series parallel resonant ...

    African Journals Online (AJOL)

    A prototype 300 W, 100 kHz converter is designed and built to experimentally demonstrate, dynamic and steady state performance for the LLC-T series parallel resonant converter. A comparative study is performed between experimental results and the simulation studies. The analysis shows that the output of converter is ...

  7. Lasers. Technology Learning Activity. Teacher Edition. Technology Education Series.

    Science.gov (United States)

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains the materials required for presenting an 8-day competency-based technology learning activity (TLA) designed to introduce students in grades 6-10 to advances and career opportunities in the field of laser technology. The guide uses a series of hands-on exploratory experiences into which activities to help students develop…

  8. Linking the Negative Binomial and Logarithmic Series Distributions via their Associated Series

    OpenAIRE

    SADINLE, MAURICIO

    2008-01-01

    The negative binomial distribution is associated to the series obtained by taking derivatives of the logarithmic series. Conversely, the logarithmic series distribution is associated to the series found by integrating the series associated to the negative binomial distribution. The parameter of the number of failures of the negative binomial distribution is the number of derivatives needed to obtain the negative binomial series from the logarithmic series. The reasoning in this article could ...

  9. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  10. Student Learning of Complex Earth Systems: Conceptual Frameworks of Earth Systems and Instructional Design

    Science.gov (United States)

    Scherer, Hannah H.; Holder, Lauren; Herbert, Bruce

    2017-01-01

    Engaging students in authentic problem solving concerning environmental issues in near-surface complex Earth systems involves both developing student conceptualization of Earth as a system and applying that scientific knowledge using techniques that model those used by professionals. In this first paper of a two-part series, we review the state of…

  11. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  12. Characteristics of the LeRC/Hughes J-series 30-cm engineering model thruster

    Science.gov (United States)

    Collett, C. R.; Poeschel, R. L.; Kami, S.

    1981-01-01

    As a consequence of endurance and structural tests performed on 900-series engineering model thrusters (EMT), several modifications in design were found to be necessary for achieving performance goals. The modified thruster is known as the J-series EMT. The most important of the design modifications affect the accelerator grid, gimbal mount, cathode polepiece, and wiring harness. The paper discusses the design modifications incorporated, the condition(s) they corrected, and the characteristics of the modified thruster.

  13. Quasi-Experimental Designs for Causal Inference

    Science.gov (United States)

    Kim, Yongnam; Steiner, Peter

    2016-01-01

    When randomized experiments are infeasible, quasi-experimental designs can be exploited to evaluate causal treatment effects. The strongest quasi-experimental designs for causal inference are regression discontinuity designs, instrumental variable designs, matching and propensity score designs, and comparative interrupted time series designs. This…

  14. Molecular series-tunneling junctions.

    Science.gov (United States)

    Liao, Kung-Ching; Hsu, Liang-Yan; Bowers, Carleen M; Rabitz, Herschel; Whitesides, George M

    2015-05-13

    Charge transport through junctions consisting of insulating molecular units is a quantum phenomenon that cannot be described adequately by classical circuit laws. This paper explores tunneling current densities in self-assembled monolayer (SAM)-based junctions with the structure Ag(TS)/O2C-R1-R2-H//Ga2O3/EGaIn, where Ag(TS) is template-stripped silver and EGaIn is the eutectic alloy of gallium and indium; R1 and R2 refer to two classes of insulating molecular units-(CH2)n and (C6H4)m-that are connected in series and have different tunneling decay constants in the Simmons equation. These junctions can be analyzed as a form of series-tunneling junctions based on the observation that permuting the order of R1 and R2 in the junction does not alter the overall rate of charge transport. By using the Ag/O2C interface, this system decouples the highest occupied molecular orbital (HOMO, which is localized on the carboxylate group) from strong interactions with the R1 and R2 units. The differences in rates of tunneling are thus determined by the electronic structure of the groups R1 and R2; these differences are not influenced by the order of R1 and R2 in the SAM. In an electrical potential model that rationalizes this observation, R1 and R2 contribute independently to the height of the barrier. This model explicitly assumes that contributions to rates of tunneling from the Ag(TS)/O2C and H//Ga2O3 interfaces are constant across the series examined. The current density of these series-tunneling junctions can be described by J(V) = J0(V) exp(-β1d1 - β2d2), where J(V) is the current density (A/cm(2)) at applied voltage V and βi and di are the parameters describing the attenuation of the tunneling current through a rectangular tunneling barrier, with width d and a height related to the attenuation factor β.

  15. Application examples of EFPACS series

    International Nuclear Information System (INIS)

    Tsuchiya, Yasunori; Aoki, Makoto; Yamahata, Noboru

    1989-01-01

    This paper introduces some application examples of picture archiving and communications system EFPACS series which achieves efficient management of a volume of image data generated in a hospital, and powerfully support image diagnosis using multi-modality. EFPACS can be applied to various objectives of system installation, and can meet the scale of a hospital and the way of image filing. EFPACS has been installed in a middle-scale hospital for image conference, in a general hospital for long-term archiving of MRI data and for referring in the outpatient clinic, in a dental hospital for dental image processing, and so on. (author)

  16. A Course in Time Series Analysis

    CERN Document Server

    Peña, Daniel; Tsay, Ruey S

    2011-01-01

    New statistical methods and future directions of research in time series A Course in Time Series Analysis demonstrates how to build time series models for univariate and multivariate time series data. It brings together material previously available only in the professional literature and presents a unified view of the most advanced procedures available for time series model building. The authors begin with basic concepts in univariate time series, providing an up-to-date presentation of ARIMA models, including the Kalman filter, outlier analysis, automatic methods for building ARIMA models, a

  17. Review of Worcestershire On-line Fabric Type Series website

    Directory of Open Access Journals (Sweden)

    Beverley Nenk

    2003-06-01

    Full Text Available The study of archaeological ceramics is advanced through the creation and development of regional and national pottery type-series, which contain samples of each type of pottery identified from a particular area or region. Pottery researchers working in any period, from prehistoric to post-medieval, require access to such type-series, and to their associated data, in order to be able to advance the identification of all types of pottery, not only those types produced in the local area, but those produced in surrounding regions, as well as those imported from abroad. The publication of such type-series, as well as their accessibility to researchers, is essential if the information they contain is to be disseminated. The development of the Worcestershire On-Line Fabric Type Series is the first stage in a remarkable project designed to make the complete fabric and form type series for Worcestershire ceramics accessible on the internet. As part of the Historic Environment Record for Worcestershire, formerly the Sites and Monuments Record, it is designed to improve access to finds and environmental data, with the aim of encouraging and facilitating research. Funded by Worcestershire County Council as part of its commitment to e-government, it is being developed by Worcestershire County Council Archaeology Service with OxfordArchDigital. It is one of a proposed series of on-line specialist resources (to include, for example, clay pipes, environmental archaeology, flint tools, historic buildings, which are also designed to stand alone as research tools. The ceramics website is the first part of Pottery in Perspective, a web-based project to provide information on the pottery used and made in Worcestershire from prehistory to c. 1900AD.

  18. Comparative study of series of solar radiation; Estudio comparativo de series de radiacion solar

    Energy Technology Data Exchange (ETDEWEB)

    Adaro, Agustin; Cesari, Daniela; Lema, Alba; Galimberti, Pablo; Barral, Jorge [Universidad Nacional de Rio Cuarto, (Argentina)

    2000-07-01

    In any team or solar device that it seeks to be designed and dedicated to the use of the solar energy it will be had the most appropriate information on the radiation levels. Being this source of dependent energy of the atmospheric and meteorological fluctuations, it is that requires have the information best regarding the quantity and variability of the available solar energy. A road is already the statistical treatment of the data available, so much of solar radiation as of hours of sun. This focus generates a lot of expectation for the biggest quantity in information regarding the hours of existent sun. This bigger information of hours of sun is due to that the mensurations are carried out with instruments called heliografos with a level of complexity and much smaller cost that the instruments of radiation mensuration. Among the heliografos the most used one is that of Campbell-Stokes, and it is the one that you had installed in most of the meteorological stations of Argentina and the World, for what the information of hours of sun is the one that more is plentiful. The present work has for objective to find an interrelation between the measured series of hours of sun and irradiation. The study is carried out using models of temporary series and the pattern of Angstrom-Page. The are carried out a study of the generation of radiation sequences using models of temporary series and the pattern of Angstrom-Page. They are carried out a study of the generation of radiation sequences using the concept of the Chains of Markov. Rio Cuarto's series are analyzed for being determined the transfer function among both series, and the values of global solar radiation are obtained for towns of the same region. They are the coefficients of Anstrom-Page's Equation for Rio Cuarto. They are the values monthly means for these two methods and results are compared. [Spanish] En cualquier equipo o dispositivo solar que pretenda ser disenado y destinado al aprovechamiento de

  19. Pointwise convergence of Fourier series

    CERN Document Server

    Arias de Reyna, Juan

    2002-01-01

    This book contains a detailed exposition of Carleson-Hunt theorem following the proof of Carleson: to this day this is the only one giving better bounds. It points out the motivation of every step in the proof. Thus the Carleson-Hunt theorem becomes accessible to any analyst.The book also contains the first detailed exposition of the fine results of Hunt, Sjölin, Soria, etc on the convergence of Fourier Series. Its final chapters present original material. With both Fefferman's proof and the recent one of Lacey and Thiele in print, it becomes more important than ever to understand and compare these two related proofs with that of Carleson and Hunt. These alternative proofs do not yield all the results of the Carleson-Hunt proof. The intention of this monograph is to make Carleson's proof accessible to a wider audience, and to explain its consequences for the pointwise convergence of Fourier series for functions in spaces near $äcal Lü^1$, filling a well-known gap in the literature.

  20. Sequential series for nuclear reactions

    International Nuclear Information System (INIS)

    Izumo, Ko

    1975-01-01

    A new time-dependent treatment of nuclear reactions is given, in which the wave function of compound nucleus is expanded by a sequential series of the reaction processes. The wave functions of the sequential series form another complete set of compound nucleus at the limit Δt→0. It is pointed out that the wave function is characterized by the quantities: the number of degrees of freedom of motion n, the period of the motion (Poincare cycle) tsub(n), the delay time t sub(nμ) and the relaxation time tausub(n) to the equilibrium of compound nucleus, instead of the usual quantum number lambda, the energy eigenvalue Esub(lambda) and the total width GAMMAsub(lambda) of resonance levels, respectively. The transition matrix elements and the yields of nuclear reactions also become the functions of time given by the Fourier transform of the usual ones. The Poincare cycles of compound nuclei are compared with the observed correlations among resonance levels, which are about 10 -17 --10 -16 sec for medium and heavy nuclei and about 10 -20 sec for the intermediate resonances. (auth.)

  1. A Time Series Forecasting Method

    Directory of Open Access Journals (Sweden)

    Wang Zhao-Yu

    2017-01-01

    Full Text Available This paper proposes a novel time series forecasting method based on a weighted self-constructing clustering technique. The weighted self-constructing clustering processes all the data patterns incrementally. If a data pattern is not similar enough to an existing cluster, it forms a new cluster of its own. However, if a data pattern is similar enough to an existing cluster, it is removed from the cluster it currently belongs to and added to the most similar cluster. During the clustering process, weights are learned for each cluster. Given a series of time-stamped data up to time t, we divide it into a set of training patterns. By using the weighted self-constructing clustering, the training patterns are grouped into a set of clusters. To estimate the value at time t + 1, we find the k nearest neighbors of the input pattern and use these k neighbors to decide the estimation. Experimental results are shown to demonstrate the effectiveness of the proposed approach.

  2. The Westinghouse Series 1000 Mobile Phone: Technology and applications

    Science.gov (United States)

    Connelly, Brian

    1993-01-01

    Mobile satellite communications will be popularized by the North American Mobile Satellite (MSAT) system. The success of the overall system is dependent upon the quality of the mobile units. Westinghouse is designing our unit, the Series 1000 Mobile Phone, with the user in mind. The architecture and technology aim at providing optimum performance at a low per unit cost. The features and functions of the Series 1000 Mobile Phone have been defined by potential MSAT users. The latter portion of this paper deals with who those users may be.

  3. Bootstrap Power of Time Series Goodness of fit tests

    Directory of Open Access Journals (Sweden)

    Sohail Chand

    2013-10-01

    Full Text Available In this article, we looked at power of various versions of Box and Pierce statistic and Cramer von Mises test. An extensive simulation study has been conducted to compare the power of these tests. Algorithms have been provided for the power calculations and comparison has also been made between the semi parametric bootstrap methods used for time series. Results show that Box-Pierce statistic and its various versions have good power against linear time series models but poor power against non linear models while situation reverses for Cramer von Mises test. Moreover, we found that dynamic bootstrap method is better than xed design bootstrap method.

  4. Understanding representations in design

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1998-01-01

    Representing computer applications and their use is an important aspect of design. In various ways, designers need to externalize design proposals and present them to other designers, users, or managers. This article deals with understanding design representations and the work they do in design....... The article is based on a series of theoretical concepts coming out of studies of scientific and other work practices and on practical experiences from design of computer applications. The article presents alternatives to the ideas that design representations are mappings of present or future work situations...... and computer applications. It suggests that representations are primarily containers of ideas and that representation is situated at the same time as representations are crossing boundaries between various design and use activities. As such, representations should be carriers of their own contexts regarding...

  5. Visits Service Launches New Seminar Series

    CERN Multimedia

    2001-01-01

    The CERN Visits Service is launching a new series of seminars for guides, and they are open to everyone. The series kicks off next week with a talk by Konrad Elsener on the CERN neutrinos to Gran Sasso, CNGS, project.

  6. A Power Series Expansion and Its Applications

    Science.gov (United States)

    Chen, Hongwei

    2006-01-01

    Using the power series solution of a differential equation and the computation of a parametric integral, two elementary proofs are given for the power series expansion of (arcsin x)[squared], as well as some applications of this expansion.

  7. The analysis of time series: an introduction

    National Research Council Canada - National Science Library

    Chatfield, Christopher

    1989-01-01

    .... A variety of practical examples are given to support the theory. The book covers a wide range of time-series topics, including probability models for time series, Box-Jenkins forecasting, spectral analysis, linear systems and system identification...

  8. Prediction and Geometry of Chaotic Time Series

    National Research Council Canada - National Science Library

    Leonardi, Mary

    1997-01-01

    This thesis examines the topic of chaotic time series. An overview of chaos, dynamical systems, and traditional approaches to time series analysis is provided, followed by an examination of state space reconstruction...

  9. Global Population Density Grid Time Series Estimates

    Data.gov (United States)

    National Aeronautics and Space Administration — Global Population Density Grid Time Series Estimates provide a back-cast time series of population density grids based on the year 2000 population grid from SEDAC's...

  10. Investment Company Series and Class Information

    Data.gov (United States)

    Securities and Exchange Commission — The Series and Class Report provides basic identification information for all active registered investment company series and classes that have been issued IDs by...

  11. Brand placements in fashion TV series

    NARCIS (Netherlands)

    Fakkert, M.-S.; Voorveld, H.A.M.; van Reijmersdal, E.A.; Banks, I.B.; De Pelsmacker, P.; Okazaki, S.

    2015-01-01

    Recently Fashion TV series have gained more and more popularity among young women worldwide (Dehnart 2008; Seidman 2010). Fashion TV series are an immensely popular TV genre portraying the world of fashion and the accompanying glamorous lifestyle.

  12. Shedding Light on Engineering Design

    Science.gov (United States)

    Capobianco, Brenda M.; Nyquist, Chell; Tyrie, Nancy

    2013-01-01

    This article describes the steps incorporated to teach an engineering design process in a fifth-grade science classroom. The engineering design-based activity was an existing scientific inquiry activity using UV light--detecting beads and purposefully creating a series of engineering design-based challenges around the investigation. The…

  13. Effective Feature Preprocessing for Time Series Forecasting

    DEFF Research Database (Denmark)

    Zhao, Junhua; Dong, Zhaoyang; Xu, Zhao

    2006-01-01

    Time series forecasting is an important area in data mining research. Feature preprocessing techniques have significant influence on forecasting accuracy, therefore are essential in a forecasting model. Although several feature preprocessing techniques have been applied in time series forecasting...... performance in time series forecasting. It is demonstrated in our experiment that, effective feature preprocessing can significantly enhance forecasting accuracy. This research can be a useful guidance for researchers on effectively selecting feature preprocessing techniques and integrating them with time...... series forecasting models....

  14. Robust Force Control of Series Elastic Actuators

    Directory of Open Access Journals (Sweden)

    Andrea Calanca

    2014-07-01

    Full Text Available Force-controlled series elastic actuators (SEA are widely used in novel human-robot interaction (HRI applications, such as assistive and rehabilitation robotics. These systems are characterized by the presence of the “human in the loop”, so that control response and stability depend on uncertain human dynamics, including reflexes and voluntary forces. This paper proposes a force control approach that guarantees the stability and robustness of the coupled human-robot system, based on sliding-mode control (SMC, considering the human dynamics as a disturbance to reject. We propose a chattering free solution that employs simple task models to obtain high performance, comparable with second order solutions. Theoretical stability is proven within the sliding mode framework, and predictability is reached by avoiding the reaching phase by design. Furthermore, safety is introduced by a proper design of the sliding surface. The practical feasibility of the approach is shown using an SEA prototype coupled with a human impedance in severe stress tests. To show the quality of the approach, we report a comparison with state-of-the-art second order SMC, passivity-based control and adaptive control solutions.

  15. Women's series: by women, for women?

    NARCIS (Netherlands)

    Kuitert, L.; Spiers, J.

    2011-01-01

    One of the striking phenomena in the 19th century publishing history is the abundant publication of publisher''s series. This contribution concerns series specifically meant for women. The focus is on Dutch literary series for women, mostly 19th century.

  16. Improving the Instruction of Infinite Series

    Science.gov (United States)

    Lindaman, Brian; Gay, A. Susan

    2012-01-01

    Calculus instructors struggle to teach infinite series, and students have difficulty understanding series and related concepts. Four instructional strategies, prominently used during the calculus reform movement, were implemented during a 3-week unit on infinite series in one class of second-semester calculus students. A description of each…

  17. Winter Video Series Coming in January | Poster

    Science.gov (United States)

    The Scientific Library’s annual Summer Video Series was so successful that it will be offering a new Winter Video Series beginning in January. For this inaugural event, the staff is showing the eight-part series from National Geographic titled “American Genius.” 

  18. The Harmonic Series Diverges Again and Again

    Science.gov (United States)

    Kifowit, Steven J.; Stamps, Terra A.

    2006-01-01

    The harmonic series is one of the most celebrated infinite series of mathematics. A quick glance at a variety of modern calculus textbooks reveals that there are two very popular proofs of the divergence of the harmonic series. In this article, the authors survey these popular proofs along with many other proofs that are equally simple and…

  19. Seminar series on Safety matters

    CERN Multimedia

    HSE

    2010-01-01

    The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

  20. BWR series pump recirculation system

    International Nuclear Information System (INIS)

    Dillmann, C.W.

    1992-01-01

    This patent describes a recirculation system for driving reactor coolant water contained in an annular downcomer defined between a boiling water reactor vessel and a reactor core spaced radially inwardly therefrom. It comprises a plurality of circumferentially spaced second pumps disposed in the downcomer, each including an inlet for receiving from the downcomer a portion of the coolant water as pump inlet flow, and an outlet for discharging the pump inlet flow pressurized in the second pump as pump outlet flow; and means for increasing pressure of the pump inlet flow at the pump inlet including a first pump disposed in series flow with the second pump for first receiving the pump inlet flow from the downcomer and discharging to the second pump inlet flow pressurized in the first pump

  1. La scienza delle serie tv

    CERN Document Server

    Gentile, Andrea

    2016-01-01

    Un professore di chimica potrebbe davvero fabbricare droga come Walter White in "Breaking Bad"? Tra quanto avremo il teletrasporto di "Star Trek"? E qual è il modo migliore di reagire a un'epidemia zombie come quella di "The Walking Dead"? Si può parlare di scienza anche stando comodamente in poltrona di fronte alla televisione. Le serie tv sono diventate prodotti di culto, e le più celebri sono proprio quelle fantascientifiche, mediche o di investigazione, che al loro interno raccontano molta scienza. Cosa c'è di vero in ciò che mostrano? Dalla nascita del cosmo in "The Big Bang Theory", passando per le fantadiagnosi del "Dr. House", i complotti alieni di "X-Files" e la natura del tempo in "True Detective", Andrea Gentile svela il lato nascosto dei nostri show preferiti, con un linguaggio semplice e spiegazioni alla portata di tutti.

  2. TechEdSat Nano-Satellite Series Fact Sheet

    Science.gov (United States)

    Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

    2014-01-01

    TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

  3. Time series analysis and its applications with R examples

    CERN Document Server

    Shumway, Robert H

    2017-01-01

    The fourth edition of this popular graduate textbook, like its predecessors, presents a balanced and comprehensive treatment of both time and frequency domain methods with accompanying theory. Numerous examples using nontrivial data illustrate solutions to problems such as discovering natural and anthropogenic climate change, evaluating pain perception experiments using functional magnetic resonance imaging, and monitoring a nuclear test ban treaty. The book is designed as a textbook for graduate level students in the physical, biological, and social sciences and as a graduate level text in statistics. Some parts may also serve as an undergraduate introductory course. Theory and methodology are separated to allow presentations on different levels. In addition to coverage of classical methods of time series regression, ARIMA models, spectral analysis and state-space models, the text includes modern developments including categorical time series analysis, multivariate spectral methods, long memory series, nonli...

  4. Thyristor-controlled reactor improves series capacitor applications

    Energy Technology Data Exchange (ETDEWEB)

    Renz, K.W.; Thumm, G.; Weiss, S. [Siemens AG, Erlangen (Germany)

    1995-12-31

    Environmental considerations make it more and more difficult to plan and erect new transmission lines. FACTS (Flexible AC Transmission Systems) technology can provide devices to improve the utility of AC transmission lines. The innovative combination of conventional fixed series capacitors and thyristor controlled reactors as a new FACTS device was introduced into a transmission system in 1992. This Advanced Series Compensation (ASC) system provides many advantages not available with conventional fixed series capacitor installations such as flexible direct and continuous control of the compensation level, direct and smooth power flow control and improved capacitor bank protection. This new technology offers enhanced system flexibility by control of transmission line overload conditions, reduction in fault currents, sub-synchronous resonance (SSR) mitigation and network power oscillation damping. The world-first three-phase installation at Kayenta Substation, USA, demonstrates that modern FACTS devices using SVC thyristor valve technology can be designed and operated successfully. 6 refs, 7 figs

  5. Designing Communication Design

    DEFF Research Database (Denmark)

    Løvlie, Anders Sundnes

    2016-01-01

    Innovating in the field of new media genres requires methods for producing designs that can succeed in being disseminated and used outside of design research labs. This article uses the author's experiences with the development of university courses in communication design to address the research...... question: How can we design courses to give students the competencies they need to work as designers of new media? Based on existing approaches from UX design and other fields, I present a model that has demonstrated its usefulness in the development of commercial products and services. The model...

  6. Designing the Object Game

    DEFF Research Database (Denmark)

    Filip, Diane; Lindegaard, Hanne

    2016-01-01

    The Object Game is an exploratory design game and an experiment of developing a tangible object that can spark dialogue and retrospection between collaborative partners and act as a boundary object. The objective of this article is to show and elaborate on the development of the Object Game......, and to provide case examples of the game in action. The Object Game has two parts – Story-building and Co-rating of objects – with the aim of stimulating a collaborative reflection on knowledge sharing with different objects. In Story-building, the participants visualize their knowledge sharing process...... these facilitated knowledge transfer, knowledge exchange, knowledge generation, and knowledge integration. The participants collaborative reflected on their use of different objects for knowledge sharing and learn which objects have been effective (and which have not been effective) in their collaborative...

  7. Kapteyn series arising in radiation problems

    International Nuclear Information System (INIS)

    Lerche, I; Tautz, R C

    2008-01-01

    In discussing radiation from multiple point charges or magnetic dipoles, moving in circles or ellipses, a variety of Kapteyn series of the second kind arises. Some of the series have been known in closed form for a hundred years or more, others appear not to be available to analytic persuasion. This paper shows how 12 such generic series can be developed to produce either closed analytic expressions or integrals that are not analytically tractable. In addition, the method presented here may be of benefit when one has other Kapteyn series of the second kind to consider, thereby providing an additional reason to consider such series anew

  8. Cuspidal discrete series for projective hyperbolic spaces

    DEFF Research Database (Denmark)

    Andersen, Nils Byrial; Flensted-Jensen, Mogens

    2013-01-01

    Abstract. We have in [1] proposed a definition of cusp forms on semisimple symmetric spaces G/H, involving the notion of a Radon transform and a related Abel transform. For the real non-Riemannian hyperbolic spaces, we showed that there exists an infinite number of cuspidal discrete series......, and at most finitely many non-cuspidal discrete series, including in particular the spherical discrete series. For the projective spaces, the spherical discrete series are the only non-cuspidal discrete series. Below, we extend these results to the other hyperbolic spaces, and we also study the question...

  9. Special values of the hypergeometric series

    CERN Document Server

    Ebisu, Akihito

    2017-01-01

    In this paper, the author presents a new method for finding identities for hypergeoemtric series, such as the (Gauss) hypergeometric series, the generalized hypergeometric series and the Appell-Lauricella hypergeometric series. Furthermore, using this method, the author gets identities for the hypergeometric series F(a,b;c;x) and shows that values of F(a,b;c;x) at some points x can be expressed in terms of gamma functions, together with certain elementary functions. The author tabulates the values of F(a,b;c;x) that can be obtained with this method and finds that this set includes almost all previously known values and many previously unknown values.

  10. Kolmogorov Space in Time Series Data

    OpenAIRE

    Kanjamapornkul, K.; Pinčák, R.

    2016-01-01

    We provide the proof that the space of time series data is a Kolmogorov space with $T_{0}$-separation axiom using the loop space of time series data. In our approach we define a cyclic coordinate of intrinsic time scale of time series data after empirical mode decomposition. A spinor field of time series data comes from the rotation of data around price and time axis by defining a new extradimension to time series data. We show that there exist hidden eight dimensions in Kolmogorov space for ...

  11. Time Series Analysis and Forecasting by Example

    CERN Document Server

    Bisgaard, Soren

    2011-01-01

    An intuition-based approach enables you to master time series analysis with ease Time Series Analysis and Forecasting by Example provides the fundamental techniques in time series analysis using various examples. By introducing necessary theory through examples that showcase the discussed topics, the authors successfully help readers develop an intuitive understanding of seemingly complicated time series models and their implications. The book presents methodologies for time series analysis in a simplified, example-based approach. Using graphics, the authors discuss each presented example in

  12. Toward automatic time-series forecasting using neural networks.

    Science.gov (United States)

    Yan, Weizhong

    2012-07-01

    Over the past few decades, application of artificial neural networks (ANN) to time-series forecasting (TSF) has been growing rapidly due to several unique features of ANN models. However, to date, a consistent ANN performance over different studies has not been achieved. Many factors contribute to the inconsistency in the performance of neural network models. One such factor is that ANN modeling involves determining a large number of design parameters, and the current design practice is essentially heuristic and ad hoc, this does not exploit the full potential of neural networks. Systematic ANN modeling processes and strategies for TSF are, therefore, greatly needed. Motivated by this need, this paper attempts to develop an automatic ANN modeling scheme. It is based on the generalized regression neural network (GRNN), a special type of neural network. By taking advantage of several GRNN properties (i.e., a single design parameter and fast learning) and by incorporating several design strategies (e.g., fusing multiple GRNNs), we have been able to make the proposed modeling scheme to be effective for modeling large-scale business time series. The initial model was entered into the NN3 time-series competition. It was awarded the best prediction on the reduced dataset among approximately 60 different models submitted by scholars worldwide.

  13. 40 CFR 1048.140 - What are the provisions for certifying Blue Sky Series engines?

    Science.gov (United States)

    2010-07-01

    ... Blue Sky Series engines? 1048.140 Section 1048.140 Protection of Environment ENVIRONMENTAL PROTECTION... Sky Series engines? This section defines voluntary standards for a recognized level of superior emission control for engines designated as “Blue Sky Series” engines. If you certify an engine family under...

  14. A new series of HAPs as anti-HBV agents targeting at capsid assembly.

    Science.gov (United States)

    Yang, Xiu-yan; Xu, Xiao-qian; Guan, Hua; Wang, Li-li; Wu, Qin; Zhao, Guo-ming; Li, Song

    2014-09-01

    A series of novel Heteroaryldihydropyrimidines (HAPs) derivatives were designed and synthesized as potent inhibitors of HBV capsid assembly. These compounds were prepared from efforts to optimize an earlier series of HAPs, and compounds Mo1, Mo7, Mo8, Mo10, Mo12, and Mo13 demonstrated potent inhibition of HBV DNA replication at submicromolar range. Copyright © 2014. Published by Elsevier Ltd.

  15. A Survey of Viewership of Television Series Sponsored by ESAA Legislation. Executive Summary.

    Science.gov (United States)

    Applied Management Sciences, Inc., Silver Spring, MD.

    The U.S. Office of Education, under the legislative authority of the Emergency School Aid Act (ESAA), commissioned a survey of the viewership of 11 ESAA-funded TV series designed to reduce cultural isolation in minority children. Objectives of the survey were to determine the availability of the ESAA-TV series to their target audiences, as well as…

  16. Macro-environmental policy: Principles and design

    International Nuclear Information System (INIS)

    Huppes, G.

    1993-01-01

    The central theme of this book is how macro-environmental policy can be developed, which does not prescribe or suggest specific technologies and products bu realizes the environmental quality desired by changing the general context. The publication is composed of four main parts. The framework for analysis and the normative principles for policy design and evaluation, the first two parts, form the analytic core. The framework for analysis gives a classification of instruments in terms of permutations of a limited number of defining elements. The normative principles guide choices in instrument design and, as the flexible response strategy, guide their application in specific policies. Detailing two main new instruments (the standard method for life cycle analysis and the substance deposit, and applying the instrument strategy as developed to the cases make up the next two parts

  17. An investigation of application of the golden ratio and Fibonacci sequence in fashion design and pattern making

    Science.gov (United States)

    Kazlacheva, Z. I.

    2017-10-01

    The Golden ratio and Fibonacci sequence are used as proportions in design as symbols of beauty and harmony. That symbolism is a result of the strong connections in their mathematical nature. The Golden section is a number, introduced with Greek letter φ, which is found by dividing a line into two parts as the longer part divided by the smaller part is equal as the whole length of longer and smaller parts divided by the longer part. Fibonacci sequence is a series of numbers where every number is equal to the two numbers before it. An investigation of application of proportions based on the Golden ratio and Fibonacci sequence in the fashion design and pattern making of ladies’ clothing is the main aim of the paper. Based on the study it may be concluded that in fashion design and pattern making the Golden ratio and Fibonacci sequence can be used in creation of beautiful and harmonic forms directly or with the help of geometrical figures as: In directly use the Golden and Fibonacci numbers proportions can be in one and the same or different directions. In the application with the help of geometrical shapes the Golden and Fibonacci figures combine proportioning and form creation. The Golden and Fibonacci shapes can be used directly as forms or as frames of forms creation of elements and pieces. Its application can be in different directions and location according the bodice. The Golden section and Fibonacci sequence can combine proportions with other principles of design as symmetry, rhythm, etc.

  18. SensL B-Series and C-Series silicon photomultipliers for time-of-flight positron emission tomography

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, K., E-mail: koneill@sensl.com; Jackson, C., E-mail: cjackson@sensl.com

    2015-07-01

    Silicon photomultipliers from SensL are designed for high performance, uniformity and low cost. They demonstrate peak photon detection efficiency of 41% at 420 nm, which is matched to the output spectrum of cerium doped lutetium orthosilicate. Coincidence resolving time of less than 220 ps is demonstrated. New process improvements have lead to the development of C-Series SiPM which reduces the dark noise by over an order of magnitude. In this paper we will show characterization test results which include photon detection efficiency, dark count rate, crosstalk probability, afterpulse probability and coincidence resolving time comparing B-Series to the newest pre-production C-Series. Additionally we will discuss the effect of silicon photomultiplier microcell size on coincidence resolving time allowing the optimal microcell size choice to be made for time of flight positron emission tomography systems.

  19. Time Series Outlier Detection Based on Sliding Window Prediction

    Directory of Open Access Journals (Sweden)

    Yufeng Yu

    2014-01-01

    Full Text Available In order to detect outliers in hydrological time series data for improving data quality and decision-making quality related to design, operation, and management of water resources, this research develops a time series outlier detection method for hydrologic data that can be used to identify data that deviate from historical patterns. The method first built a forecasting model on the history data and then used it to predict future values. Anomalies are assumed to take place if the observed values fall outside a given prediction confidence interval (PCI, which can be calculated by the predicted value and confidence coefficient. The use of PCI as threshold is mainly on the fact that it considers the uncertainty in the data series parameters in the forecasting model to address the suitable threshold selection problem. The method performs fast, incremental evaluation of data as it becomes available, scales to large quantities of data, and requires no preclassification of anomalies. Experiments with different hydrologic real-world time series showed that the proposed methods are fast and correctly identify abnormal data and can be used for hydrologic time series analysis.

  20. Duality between Time Series and Networks

    Science.gov (United States)

    Campanharo, Andriana S. L. O.; Sirer, M. Irmak; Malmgren, R. Dean; Ramos, Fernando M.; Amaral, Luís A. Nunes.

    2011-01-01

    Studying the interaction between a system's components and the temporal evolution of the system are two common ways to uncover and characterize its internal workings. Recently, several maps from a time series to a network have been proposed with the intent of using network metrics to characterize time series. Although these maps demonstrate that different time series result in networks with distinct topological properties, it remains unclear how these topological properties relate to the original time series. Here, we propose a map from a time series to a network with an approximate inverse operation, making it possible to use network statistics to characterize time series and time series statistics to characterize networks. As a proof of concept, we generate an ensemble of time series ranging from periodic to random and confirm that application of the proposed map retains much of the information encoded in the original time series (or networks) after application of the map (or its inverse). Our results suggest that network analysis can be used to distinguish different dynamic regimes in time series and, perhaps more importantly, time series analysis can provide a powerful set of tools that augment the traditional network analysis toolkit to quantify networks in new and useful ways. PMID:21858093

  1. A Review of Subsequence Time Series Clustering

    Directory of Open Access Journals (Sweden)

    Seyedjamal Zolhavarieh

    2014-01-01

    Full Text Available Clustering of subsequence time series remains an open issue in time series clustering. Subsequence time series clustering is used in different fields, such as e-commerce, outlier detection, speech recognition, biological systems, DNA recognition, and text mining. One of the useful fields in the domain of subsequence time series clustering is pattern recognition. To improve this field, a sequence of time series data is used. This paper reviews some definitions and backgrounds related to subsequence time series clustering. The categorization of the literature reviews is divided into three groups: preproof, interproof, and postproof period. Moreover, various state-of-the-art approaches in performing subsequence time series clustering are discussed under each of the following categories. The strengths and weaknesses of the employed methods are evaluated as potential issues for future studies.

  2. Methods for summing general Kapteyn series

    Energy Technology Data Exchange (ETDEWEB)

    Tautz, R C [Zentrum fuer Astronomie und Astrophysik, Technische Universitaet Berlin, Hardenbergstrasse 36, D-10623 Berlin (Germany); Lerche, I [Institut fuer Geowissenschaften, Naturwissenschaftliche Fakultaet III, Martin-Luther-Universitaet Halle, D-06099 Halle (Germany); Dominici, D, E-mail: rct@gmx.eu, E-mail: lercheian@yahoo.com, E-mail: dominicd@newpaltz.edu [Department of Mathematics, State University of New York at New Paltz, 1 Hawk Dr, New Paltz, NY 12561-2443 (United States)

    2011-09-23

    The general features and characteristics of Kapteyn series, which are a special type of series involving the Bessel function, are investigated. For many applications in physics, astrophysics and mathematics, it is crucial to have closed-form expressions in order to determine their functional structure and parametric behavior. The closed-form expressions of Kapteyn series have mostly been limited to special cases, even though there are often similarities in the approaches used to reduce the series to analytically tractable forms. The goal of this paper is to review the previous work in the area and to show that Kapteyn series can be expressed as trigonometric or gamma function series, which can be evaluated in a closed form for specific parameters. Two examples with a similar structure are given, showing the complexity of Kapteyn series. (paper)

  3. A review of subsequence time series clustering.

    Science.gov (United States)

    Zolhavarieh, Seyedjamal; Aghabozorgi, Saeed; Teh, Ying Wah

    2014-01-01

    Clustering of subsequence time series remains an open issue in time series clustering. Subsequence time series clustering is used in different fields, such as e-commerce, outlier detection, speech recognition, biological systems, DNA recognition, and text mining. One of the useful fields in the domain of subsequence time series clustering is pattern recognition. To improve this field, a sequence of time series data is used. This paper reviews some definitions and backgrounds related to subsequence time series clustering. The categorization of the literature reviews is divided into three groups: preproof, interproof, and postproof period. Moreover, various state-of-the-art approaches in performing subsequence time series clustering are discussed under each of the following categories. The strengths and weaknesses of the employed methods are evaluated as potential issues for future studies.

  4. A Review of Subsequence Time Series Clustering

    Science.gov (United States)

    Teh, Ying Wah

    2014-01-01

    Clustering of subsequence time series remains an open issue in time series clustering. Subsequence time series clustering is used in different fields, such as e-commerce, outlier detection, speech recognition, biological systems, DNA recognition, and text mining. One of the useful fields in the domain of subsequence time series clustering is pattern recognition. To improve this field, a sequence of time series data is used. This paper reviews some definitions and backgrounds related to subsequence time series clustering. The categorization of the literature reviews is divided into three groups: preproof, interproof, and postproof period. Moreover, various state-of-the-art approaches in performing subsequence time series clustering are discussed under each of the following categories. The strengths and weaknesses of the employed methods are evaluated as potential issues for future studies. PMID:25140332

  5. Travel Series as TV Entertainment: Genre characteristics and touristic views on foreign countries

    Directory of Open Access Journals (Sweden)

    Anne Marit Waade

    2009-04-01

    Full Text Available Why is it not the deprived developing country, but rather the tempting destination the host arrives in when guiding the audience in a travel series? And how can we explore the specific combination of entertainment and education that travel series represent? Basically the travel series genre is a hybrid of journalistic documentary, entertaining lifestyle series and TV ads and the different series put different emphasis on the different genre elements. Travel series represent a certain kind of mediated consumption and they reflect lifestyle identity in relation to touristic consumer cultures. Like other lifestyle series dealing with consumption products and lifestyle markers encompassing fashion, food, garden, design and interior that balance somewhere between journalism and advertising, travel series typically deal with destinations, travel modes, cultural experiences and food as commodities. To understand the cultural and democratic value of travel series as a popular TV genre in the context of public service broadcasting, it is not the fact that the series contain educative and enlightening information about foreign cultures told in an entertaining and popular way that are of my interest. Rather it is tourism and media consumer culture as such, one has to expound as valuable democratic and cultural practice. The article presents different matrices of the respectively cultural and consumer knowledge that the different types of travel series include.

  6. 8. Algorithm Design Techniques

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 8. Algorithms - Algorithm Design Techniques. R K Shyamasundar. Series Article Volume 2 ... Author Affiliations. R K Shyamasundar1. Computer Science Group, Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India ...

  7. MAJOR REPOSITORY DESIGN ISSUES

    International Nuclear Information System (INIS)

    JACK N. BAILEY, DWAYNE CHESTNUT, JAMES COMPTON AND RICHARD D. SNELL

    1997-01-01

    The Yucca Mountain Project is focused on producing a four-part viability assessment in late FY98. Its four components (design, performance assessment, cost estimate, and licensing development plan) must be consistent. As a tool to compare design and performance assessment options, a series of repository pictures were developed for the sequential time phases of a repository. The boundaries of the time phases correspond to evolution in the engineered barrier system (EBS)

  8. Safety and design limits

    International Nuclear Information System (INIS)

    Shishkov, L. K.; Gorbaev, V. A.; Tsyganov, S. V.

    2007-01-01

    The paper touches upon the issues of NPP safety ensuring at the stage of fuel load design and operation by applying special limitations for a series of parameters, that is, design limits. Two following approaches are compared: the one used by west specialists for the PWR reactor and the Russian approach employed for the WWER reactor. The closeness of approaches is established, differences that are mainly peculiarities of terms are noted (Authors)

  9. Noam Chomsky. Modern Masters Series.

    Science.gov (United States)

    Lyons, John

    This book is designed to make the thought of Noam Chomsky, a scholar whose work has been influential not only in the field of linguistics but in psychology, philosophy, and political science as well, accessible to a wider public than is reached by Chomsky's highly technical writing. The author expresses the hope that this book will provide the…

  10. Composition: Mutual Prescriptions series (2009)

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2010-01-01

    ! This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it, performance instructions as well as specially designated recordings, as long as the author(s) is (are) mentioned. Please see http://creativecommons.org/licenses/by-nc/3.0/ for details....

  11. Cetuximab in combination with irinotecan/5-fluorouracil/folinic acid (FOLFIRI) in the initial treatment of metastatic colorectal cancer: a multicentre two-part phase I/II study

    International Nuclear Information System (INIS)

    Raoul, Jean-Luc; Van Laethem, Jean-Luc; Peeters, Marc; Brezault, Catherine; Husseini, Fares; Cals, Laurent; Nippgen, Johannes; Loos, Anja-Helena; Rougier, Philippe

    2009-01-01

    This study was designed to investigate the efficacy and safety of the epidermal growth factor receptor (EGFR) inhibitor cetuximab combined with irinotecan, folinic acid (FA) and two different doses of infusional 5-fluorouracil (5-FU) in the first-line treatment of EGFR-detectable metastatic colorectal cancer. The 5-FU dose was selected on the basis of dose-limiting toxicities (DLTs) during part I of the study. Patients received cetuximab (400 mg/m 2 initial dose and 250 mg/m 2 /week thereafter) and every 2 weeks irinotecan (180 mg/m 2 ), FA (400 mg/m 2 ) and 5-FU (either low dose [LD], 300 mg/m 2 bolus plus 2,000 mg/m 2 46-hour infusion, n = 7; or, high-dose [HD], 400 mg/m 2 bolus plus 2,400 mg/m 2 ; n = 45). Only two DLTs occurred in the HD group, and HD 5-FU was selected for use in part II. Apart from rash, commonly observed grade 3/4 adverse events such as leucopenia, diarrhoea, vomiting and asthenia occurred within the expected range for FOLFIRI. Among 52 patients, the overall response rate was 48%. Median progression-free survival (PFS) was 8.6 months (counting all reported progressions) and the median overall survival was 22.4 months. Treatment facilitated the resection of initially unresectable metastases in fourteen patients (27%): of these, 10 patients (71%) had no residual tumour after surgery, and these resections hindered the estimation of PFS. The combination of cetuximab and FOLFIRI was active and well tolerated in this setting. Initially unresectable metastases became resectable in one-quarter of patients, with a high number of complete resections, and these promising results formed the basis for the investigation of FOLFIRI with and without cetuximab in the phase III CRYSTAL trial

  12. Cetuximab in combination with irinotecan/5-fluorouracil/folinic acid (FOLFIRI in the initial treatment of metastatic colorectal cancer: a multicentre two-part phase I/II study

    Directory of Open Access Journals (Sweden)

    Cals Laurent

    2009-04-01

    Full Text Available Abstract Background This study was designed to investigate the efficacy and safety of the epidermal growth factor receptor (EGFR inhibitor cetuximab combined with irinotecan, folinic acid (FA and two different doses of infusional 5-fluorouracil (5-FU in the first-line treatment of EGFR-detectable metastatic colorectal cancer. Methods The 5-FU dose was selected on the basis of dose-limiting toxicities (DLTs during part I of the study. Patients received cetuximab (400 mg/m2 initial dose and 250 mg/m2/week thereafter and every 2 weeks irinotecan (180 mg/m2, FA (400 mg/m2 and 5-FU (either low dose [LD], 300 mg/m2 bolus plus 2,000 mg/m2 46-hour infusion, n = 7; or, high-dose [HD], 400 mg/m2 bolus plus 2,400 mg/m2; n = 45. Results Only two DLTs occurred in the HD group, and HD 5-FU was selected for use in part II. Apart from rash, commonly observed grade 3/4 adverse events such as leucopenia, diarrhoea, vomiting and asthenia occurred within the expected range for FOLFIRI. Among 52 patients, the overall response rate was 48%. Median progression-free survival (PFS was 8.6 months (counting all reported progressions and the median overall survival was 22.4 months. Treatment facilitated the resection of initially unresectable metastases in fourteen patients (27%: of these, 10 patients (71% had no residual tumour after surgery, and these resections hindered the estimation of PFS. Conclusion The combination of cetuximab and FOLFIRI was active and well tolerated in this setting. Initially unresectable metastases became resectable in one-quarter of patients, with a high number of complete resections, and these promising results formed the basis for the investigation of FOLFIRI with and without cetuximab in the phase III CRYSTAL trial.

  13. Triple products of Eisenstein series

    Science.gov (United States)

    Venkatesh, Anil

    In this thesis, we construct a Massey triple product on the Deligne cohomology of the modular curve with coefficients in symmetric powers of the standard representation of the modular group. This result is obtained by constructing a Massey triple product on the extension groups in the category of admissible variations of mixed Hodge structure over the modular curve, which induces the desired construction on Deligne cohomology. The result extends Brown's construction of the cup product on Deligne cohomology to a higher cohomological product. Massey triple products on Deligne cohomology have been previously investigated by Deninger, who considered Deligne cohomology with trivial real coefficients. By working over the reals, Deninger was able to compute cohomology exclusively with differential forms. In this work, Deligne cohomology is studied over the rationals, which introduces an obstruction to applying Deninger's results. The obstruction arises from the fact that the integration map from the de Rham complex to the Eilenberg-MacLane complex of the modular group is not an algebra homomorphism. We compute the correction terms of the integration map as regularized iterated integrals of Eisenstein series, and show that these integrals arise in the cup product and Massey triple product on Deligne cohomology.

  14. [Scimitar syndrome: a case series].

    Science.gov (United States)

    Jaramillo González, Carlos; Karam Bechara, José; Sáenz Gómez, Jessica; Siegert Olivares, Augusto; Jamaica Balderas, Lourdes

    Scimitar syndrome is a rare and complex congenital anomaly of the lung with multiple variables and is named for its resemblance to the classical radiological crooked sword. Its defining feature is the anomalous pulmonary drainage. It is associated with various cardiothoracic malformations and a wide spectrum of clinical manifestations. Nine patients diagnosed with scimitar syndrome found in the database of Hospital Infantil de México between 2009 and 2013 were reviewed. Demographic records, clinical status and hemodynamic parameters reported were collected. This case series called attention to certain differences between our group of patients and those reported in the international literature. Patients were predominantly female and were diagnosed between 1 and 20 months of life. All were asymptomatic at the time of the study. Half of the patients had a history of respiratory disease and all patients had with pulmonary hypertension. Surgical management was required in on-third of the patient group. Copyright © 2014 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

  15. OCRWM Bulletin: Westinghouse begins designing multi-purpose canister

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

  16. OCRWM Bulletin: Westinghouse begins designing multi-purpose canister

    International Nuclear Information System (INIS)

    1995-01-01

    This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains ampersand Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer

  17. Series: Pragmatic trials and real world evidence: Paper 1. Introduction.

    Science.gov (United States)

    Zuidgeest, Mira G P; Goetz, Iris; Groenwold, Rolf H H; Irving, Elaine; van Thiel, Ghislaine J M W; Grobbee, Diederick E

    2017-08-01

    This is the introductory paper in a series of eight papers. In this series, we integrate the theoretical design options with the practice of conducting pragmatic trials. For most new market-approved treatments, the clinical evidence is insufficient to fully guide physicians and policy makers in choosing the optimal treatment for their patients. Pragmatic trials can fill this gap, by providing evidence on the relative effectiveness of a treatment strategy in routine clinical practice, already in an early phase of development, while maintaining the strength of randomized controlled trials. Selecting the setting, study population, mode of intervention, comparator, and outcome are crucial in designing pragmatic trials. In combination with monitoring and data collection that does not change routine care, this will enable appropriate generalization to the target patient group in clinical practice. To benefit from the full potential of pragmatic trials, there is a need for guidance and tools in designing these studies while ensuring operational feasibility. This paper introduces the concept of pragmatic trial design. The complex interplay between pragmatic design options, feasibility, stakeholder acceptability, validity, precision, and generalizability will be clarified. In this way, balanced design choices can be made in pragmatic trials with an optimal chance of success in practice. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  18. Pin failure modeling of the A series CABRI tests

    International Nuclear Information System (INIS)

    Young, M.F.; Portugal, J.L.

    1978-01-01

    The EXPAND pin fialure model, a research tool designed to model pin failure under prompt burst conditions, has been used to predict failure conditions for several of the A series CABRI tests as part of the United States participation in the CABRI Joint Project. The Project is an international program involving France, Germany, England, Japan, and the United States and has the goal of obtaining experimental data relating to the safety of LMFBR's. The A series, designed to simulate high ramp rate TOP conditions, initially utilizes single, fresh UO 2 pins of the PHENIX type in a flowing sodium loop. The pins are preheated at constant power in the CABRI reactor to establish steady state conditions (480 w/cm at the axial peak) and then subjected to a power pulse of 14 ms to 24 ms duration

  19. The NLM evaluation lecture series: introduction to the special section on evaluating health communication programs.

    Science.gov (United States)

    Logan, Robert A; Kreps, Gary L

    2014-12-01

    This article introduces the Journal of Health Communication's special section, Evaluating Health Communication Programs. This special section is based on a public lecture series supported by the National Library of Medicine titled "Better Health: Evaluating Health Communication Programs" designed to share best practices for using evaluation research to develop, implement, refine, and institutionalize the best health communication programs for promoting public health. This introduction provides an overview to the series, summarizes the major presentations in the series, and describe implications from the series for translational health communication research, interventions, and programs that can enhance health outcomes.

  20. Surgery or radiotherapy for the treatment of bone hydatid disease: a retrospective case series

    Directory of Open Access Journals (Sweden)

    Zengru Xie

    2015-04-01

    Conclusion: This retrospective case series describes, for the first time, the clinical outcomes in a series of patients treated with radiotherapy for bone hydatid disease. Although no direct comparison between the treatment groups could be made due to methodological limitations of the study design, this study indicates that well-designed prospective randomized controlled clinical trials assessing radiotherapy may be warranted in patients with inoperable hydatid disease of the bones.

  1. Regenerative Braking System for Series Hybrid Electric City Bus

    OpenAIRE

    Zhang, Junzhi; Lu, Xin; Xue, Junliang; Li, Bos

    2008-01-01

    Regenerative Braking Systems (RBS) provide an efficient method to assist hybrid electric buses achieve better fuel economy while lowering exhaust emissions. This paper describes the design and testing of three regenerative braking systems, one of which is a series regenerative braking system and two of which are parallel regenerative braking systems. The existing friction based Adjustable Braking System (ABS) on the bus is integrated with each of the new braking systems in order to ensure bus...

  2. Small-signal model for the series resonant converter

    Science.gov (United States)

    King, R. J.; Stuart, T. A.

    1985-01-01

    The results of a previous discrete-time model of the series resonant dc-dc converter are reviewed and from these a small signal dynamic model is derived. This model is valid for low frequencies and is based on the modulation of the diode conduction angle for control. The basic converter is modeled separately from its output filter to facilitate the use of these results for design purposes. Experimental results are presented.

  3. Synchronization of complex chaotic systems in series expansion form

    International Nuclear Information System (INIS)

    Ge Zhengming; Yang Chenghsiung

    2007-01-01

    This paper studies the synchronization of complex chaotic systems in series expansion form by Lyapunov asymptotical stability theorem. A sufficient condition is given for the asymptotical stability of an error dynamics, and is applied to guiding the design of the secure communication. Finally, numerical results are studied for the Quantum-CNN oscillators synchronizing with unidirectional/bidirectional linear coupling to show the effectiveness of the proposed synchronization strategy

  4. Stochastic modeling of hourly rainfall times series in Campania (Italy)

    Science.gov (United States)

    Giorgio, M.; Greco, R.

    2009-04-01

    protection agency meteorological warning network. ACKNOWLEDGEMENTS The research was co-financed by the Italian Ministry of University, by means of the PRIN 2006 PRIN program, within the research project entitled ‘Definition of critical rainfall thresholds for destructive landslides for civil protection purposes'. REFERENCES Cowpertwait, P.S.P., Kilsby, C.G. and O'Connell, P.E., 2002. A space-time Neyman-Scott model of rainfall: Empirical analysis of extremes, Water Resources Research, 38(8):1-14. Salas, J.D., 1992. Analysis and modeling of hydrological time series, in D.R. Maidment, ed., Handbook of Hydrology, McGraw-Hill, New York. Heneker, T.M., Lambert, M.F. and Kuczera G., 2001. A point rainfall model for risk-based design, Journal of Hydrology, 247(1-2):54-71.

  5. Ambulatory percutaneous nephrolithotomy: initial series.

    Science.gov (United States)

    Shahrour, Walid; Andonian, Sero

    2010-12-01

    To assess the safety and feasibility of ambulatory percutaneous nephrolithotomy (PCNL). PCNL is the gold standard for the management of large renal stones. Although tubeless PCNL has been previously described, no case series have been published of ambulatory PCNL. The criteria for ambulatory PCNL were: single tract, stone-free status documented by flexible nephroscopy, adequate pain control, and satisfactory postoperative hematocrit level and chest radiographic findings. Patient information, including operating room and fluoroscopy times, stone size and Hounsfield units, and number of needle punctures, were collected prospectively. The time spent in the recovery room, in addition to the amount of narcotics used in the recovery room and at home, was documented. Of 10 patients, 8 had nephrostomy tracts established intraoperatively by the urologist and 2 had preoperative nephrostomy tubes placed. The median operating and fluoroscopy time was 83.5 and 4.45 minutes, respectively. The median stone diameter was 20 mm (800 Hounsfield units) in addition to a patient with a staghorn calculus. The patients spent a median of 240 minutes in the recovery room and had received a median of 19.25 mg of morphine equivalents. Only 3 patients (30%) used narcotics at home. No intraoperative complications occurred, and none of the patients required transfusions. Two postoperative complications developed: a deep vein thrombosis requiring outpatient anticoagulation and multiresistant Escherichia coli infection requiring intravenous antibiotics. In highly selected patients, ambulatory PCNL is safe and feasible. More patients are needed to verify the criteria for patients undergoing the ambulatory approach. Copyright © 2010 Elsevier Inc. All rights reserved.

  6. Linearization and Control of Series-Series Compensated Inductive Power Transfer System Based on Extended Describing Function Concept

    Directory of Open Access Journals (Sweden)

    Kunwar Aditya

    2016-11-01

    Full Text Available The extended describing function (EDF is a well-known method for modelling resonant converters due to its high accuracy. However, it requires complex mathematical formulation effort. This paper presents a simplified non-linear mathematical model of series-series (SS compensated inductive power transfer (IPT system, considering zero-voltage switching in the inverter. This simplified mathematical model permits the user to derive the small-signal model using the EDF method, with less computational effort, while maintaining the accuracy of an actual physical model. The derived model has been verified using a frequency sweep method in PLECS. The small-signal model has been used to design the voltage loop controller for a SS compensated IPT system. The designed controller was implemented on a 3.6 kW experimental setup, to test its robustness.

  7. Analysis of Heavy-Tailed Time Series

    DEFF Research Database (Denmark)

    Xie, Xiaolei

    This thesis is about analysis of heavy-tailed time series. We discuss tail properties of real-world equity return series and investigate the possibility that a single tail index is shared by all return series of actively traded equities in a market. Conditions for this hypothesis to be true...... are identified. We study the eigenvalues and eigenvectors of sample covariance and sample auto-covariance matrices of multivariate heavy-tailed time series, and particularly for time series with very high dimensions. Asymptotic approximations of the eigenvalues and eigenvectors of such matrices are found...... and expressed in terms of the parameters of the dependence structure, among others. Furthermore, we study an importance sampling method for estimating rare-event probabilities of multivariate heavy-tailed time series generated by matrix recursion. We show that the proposed algorithm is efficient in the sense...

  8. Visibility graph approach to exchange rate series

    Science.gov (United States)

    Yang, Yue; Wang, Jianbo; Yang, Huijie; Mang, Jingshi

    2009-10-01

    By means of a visibility graph, we investigate six important exchange rate series. It is found that the series convert into scale-free and hierarchically structured networks. The relationship between the scaling exponents of the degree distributions and the Hurst exponents obeys the analytical prediction for fractal Brownian motions. The visibility graph can be used to obtain reliable values of Hurst exponents of the series. The characteristics are explained by using the multifractal structures of the series. The exchange rate of EURO to Japanese Yen is widely used to evaluate risk and to estimate trends in speculative investments. Interestingly, the hierarchies of the visibility graphs for the exchange rate series of these two currencies are significantly weak compared with that of the other series.

  9. Correlation and multifractality in climatological time series

    International Nuclear Information System (INIS)

    Pedron, I T

    2010-01-01

    Climate can be described by statistical analysis of mean values of atmospheric variables over a period. It is possible to detect correlations in climatological time series and to classify its behavior. In this work the Hurst exponent, which can characterize correlation and persistence in time series, is obtained by using the Detrended Fluctuation Analysis (DFA) method. Data series of temperature, precipitation, humidity, solar radiation, wind speed, maximum squall, atmospheric pressure and randomic series are studied. Furthermore, the multifractality of such series is analyzed applying the Multifractal Detrended Fluctuation Analysis (MF-DFA) method. The results indicate presence of correlation (persistent character) in all climatological series and multifractality as well. A larger set of data, and longer, could provide better results indicating the universality of the exponents.

  10. International Work-Conference on Time Series

    CERN Document Server

    Pomares, Héctor

    2016-01-01

    This volume presents selected peer-reviewed contributions from The International Work-Conference on Time Series, ITISE 2015, held in Granada, Spain, July 1-3, 2015. It discusses topics in time series analysis and forecasting, advanced methods and online learning in time series, high-dimensional and complex/big data time series as well as forecasting in real problems. The International Work-Conferences on Time Series (ITISE) provide a forum for scientists, engineers, educators and students to discuss the latest ideas and implementations in the foundations, theory, models and applications in the field of time series analysis and forecasting. It focuses on interdisciplinary and multidisciplinary research encompassing the disciplines of computer science, mathematics, statistics and econometrics.

  11. The Java Series. GUI Building with Swing

    CERN Multimedia

    CERN. Geneva

    2000-01-01

    The Swing Java package contains all the components that you expect to see in a modern User Interface, from buttons that contain pictures to trees and grids. It is a big library but it's designed to have the appropriate complexity for the task at hand - if something is simple you don't have to write much code to get it done, but if you want the power to manipulate and deeply customise it you also have it. This tutorial will introduce you to the basic set of components that Swing provides and to the mechanisms behind them. It will provide an overview of what you can do with Swing, even if you are new to GUI programming. However, if you want to follow closely the mechanisms behind what's being explained, it is convenient to have some basic knowledge of the main concepts of Java AWT (class hierarchy and event model) as provided by the previous tutorial of the Java Series. Organiser(s): M.Marquina and R.Ramos /IT-User Support

  12. Algorithms for Calculating Alternating Infinite Series

    International Nuclear Information System (INIS)

    Garcia, Hector Luna; Garcia, Luz Maria

    2015-01-01

    This paper are presented novel algorithms for exact limits of a broad class of infinite alternating series. Many of these series are found in physics and other branches of science and their exact values found for us are in complete agreement with the values obtained by other authors. Finally, these simple methods are very powerful in calculating the limits of many series as shown by the examples

  13. Exponential Hilbert series of equivariant embeddings

    OpenAIRE

    Johnson, Wayne A.

    2018-01-01

    In this article, we study properties of the exponential Hilbert series of a $G$-equivariant projective variety, where $G$ is a semisimple, simply-connected complex linear algebraic group. We prove a relationship between the exponential Hilbert series and the degree and dimension of the variety. We then prove a combinatorial identity for the coefficients of the polynomial representing the exponential Hilbert series. This formula is used in examples to prove further combinatorial identities inv...

  14. BRITS: Bidirectional Recurrent Imputation for Time Series

    OpenAIRE

    Cao, Wei; Wang, Dong; Li, Jian; Zhou, Hao; Li, Lei; Li, Yitan

    2018-01-01

    Time series are widely used as signals in many classification/regression tasks. It is ubiquitous that time series contains many missing values. Given multiple correlated time series data, how to fill in missing values and to predict their class labels? Existing imputation methods often impose strong assumptions of the underlying data generating process, such as linear dynamics in the state space. In this paper, we propose BRITS, a novel method based on recurrent neural networks for missing va...

  15. Geometric noise reduction for multivariate time series.

    Science.gov (United States)

    Mera, M Eugenia; Morán, Manuel

    2006-03-01

    We propose an algorithm for the reduction of observational noise in chaotic multivariate time series. The algorithm is based on a maximum likelihood criterion, and its goal is to reduce the mean distance of the points of the cleaned time series to the attractor. We give evidence of the convergence of the empirical measure associated with the cleaned time series to the underlying invariant measure, implying the possibility to predict the long run behavior of the true dynamics.

  16. Decoding divergent series in nonparaxial optics.

    Science.gov (United States)

    Borghi, Riccardo; Gori, Franco; Guattari, Giorgio; Santarsiero, Massimo

    2011-03-15

    A theoretical analysis aimed at investigating the divergent character of perturbative series involved in the study of free-space nonparaxial propagation of vectorial optical beams is proposed. Our analysis predicts a factorial divergence for such series and provides a theoretical framework within which the results of recently published numerical experiments concerning nonparaxial propagation of vectorial Gaussian beams find a meaningful interpretation in terms of the decoding operated on such series by the Weniger transformation.

  17. Frontiers in Time Series and Financial Econometrics

    OpenAIRE

    Ling, S.; McAleer, M.J.; Tong, H.

    2015-01-01

    __Abstract__ Two of the fastest growing frontiers in econometrics and quantitative finance are time series and financial econometrics. Significant theoretical contributions to financial econometrics have been made by experts in statistics, econometrics, mathematics, and time series analysis. The purpose of this special issue of the journal on “Frontiers in Time Series and Financial Econometrics” is to highlight several areas of research by leading academics in which novel methods have contrib...

  18. Neural Network Models for Time Series Forecasts

    OpenAIRE

    Tim Hill; Marcus O'Connor; William Remus

    1996-01-01

    Neural networks have been advocated as an alternative to traditional statistical forecasting methods. In the present experiment, time series forecasts produced by neural networks are compared with forecasts from six statistical time series methods generated in a major forecasting competition (Makridakis et al. [Makridakis, S., A. Anderson, R. Carbone, R. Fildes, M. Hibon, R. Lewandowski, J. Newton, E. Parzen, R. Winkler. 1982. The accuracy of extrapolation (time series) methods: Results of a ...

  19. Designing the Urban Microclimate. A framework for a design-decision support tool for the dissemination of knowledge on the urban microclimate to the urban design process

    Directory of Open Access Journals (Sweden)

    Marjolein Pijpers-van Esch

    2015-06-01

    Full Text Available This doctoral thesis presents research on the integration and transfer of knowledge from the specialized field of urban microclimatology into the generic field of urban design. Both fields are studied in order to identify crosslinks and reveal gaps. The main research question of the research is: How can the design of urban neighbourhoods contribute to microclimates that support physical well-being and what kind of information and form of presentation does the urban designer need in order to make design decisions regarding such urban microclimates? This question consists of two parts, which are addressed separately in the first two parts of the dissertation. Part 1 concerns an assessment of relevant knowledge on urban design by literature review, followed by a field study into the use of expert information in the urban design process. Part 2 discusses the influence of the urban environment on its microclimate and, consequently, the living quality of its inhabitants – both by means of literature review. Combined, Parts 1 and 2 serve as a basis for a framework for a design-decision support tool, which is discussed in Part 3. This tool is proposed as a means to integrate knowledge of the urban microclimate into the urban design process, bridging an observed gap. Urban design is concerned with shaping the physical environment to facilitate urban life in all its aspects. This is a complex task, which requires the integration and translation of different stakeholder interests into a proposition for the realization of physical-spatial constructs in the urban environment. Such a proposition comprises different planning elements in the following categories: spatial-functional organization, city plan, public space design and rules for architecture. During the design process, the urban designer has to deal with incomplete, often contradictory and/or changing constraints and quality demands as well as other uncertainties. He/ she handles this complexity by

  20. Data mining in time series databases

    CERN Document Server

    Kandel, Abraham; Bunke, Horst

    2004-01-01

    Adding the time dimension to real-world databases produces Time SeriesDatabases (TSDB) and introduces new aspects and difficulties to datamining and knowledge discovery. This book covers the state-of-the-artmethodology for mining time series databases. The novel data miningmethods presented in the book include techniques for efficientsegmentation, indexing, and classification of noisy and dynamic timeseries. A graph-based method for anomaly detection in time series isdescribed and the book also studies the implications of a novel andpotentially useful representation of time series as strings. Theproblem of detecting changes in data mining models that are inducedfrom temporal databases is additionally discussed.

  1. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research suggest that engineering designers need assistance to understand what information is relevant for their particular design problem. They require guidance in formulating their queries and also to understand what information is relevant for them. This paper presents an approach to pr...

  2. Arctic Visiting Speakers Series (AVS)

    Science.gov (United States)

    Fox, S. E.; Griswold, J.

    2011-12-01

    The Arctic Visiting Speakers (AVS) Series funds researchers and other arctic experts to travel and share their knowledge in communities where they might not otherwise connect. Speakers cover a wide range of arctic research topics and can address a variety of audiences including K-12 students, graduate and undergraduate students, and the general public. Host applications are accepted on an on-going basis, depending on funding availability. Applications need to be submitted at least 1 month prior to the expected tour dates. Interested hosts can choose speakers from an online Speakers Bureau or invite a speaker of their choice. Preference is given to individuals and organizations to host speakers that reach a broad audience and the general public. AVS tours are encouraged to span several days, allowing ample time for interactions with faculty, students, local media, and community members. Applications for both domestic and international visits will be considered. Applications for international visits should involve participation of more than one host organization and must include either a US-based speaker or a US-based organization. This is a small but important program that educates the public about Arctic issues. There have been 27 tours since 2007 that have impacted communities across the globe including: Gatineau, Quebec Canada; St. Petersburg, Russia; Piscataway, New Jersey; Cordova, Alaska; Nuuk, Greenland; Elizabethtown, Pennsylvania; Oslo, Norway; Inari, Finland; Borgarnes, Iceland; San Francisco, California and Wolcott, Vermont to name a few. Tours have included lectures to K-12 schools, college and university students, tribal organizations, Boy Scout troops, science center and museum patrons, and the general public. There are approximately 300 attendees enjoying each AVS tour, roughly 4100 people have been reached since 2007. The expectations for each tour are extremely manageable. Hosts must submit a schedule of events and a tour summary to be posted online

  3. On the analyticity of Laguerre series

    International Nuclear Information System (INIS)

    Weniger, Ernst Joachim

    2008-01-01

    The transformation of a Laguerre series f(z) = Σ ∞ n=0 λ (α) n L (α) n (z) to a power series f(z) = Σ ∞ n=0 γ n z n is discussed. Since many nonanalytic functions can be expanded in terms of generalized Laguerre polynomials, success is not guaranteed and such a transformation can easily lead to a mathematically meaningless expansion containing power series coefficients that are infinite in magnitude. Simple sufficient conditions based on the decay rates and sign patterns of the Laguerre series coefficients λ (α) n as n → ∞ can be formulated which guarantee that the resulting power series represents an analytic function. The transformation produces a mathematically meaningful result if the coefficients λ (α) n either decay exponentially or factorially as n → ∞. The situation is much more complicated-but also much more interesting-if the λ (α) n decay only algebraically as n → ∞. If the λ (α) n ultimately have the same sign, the series expansions for the power series coefficients diverge, and the corresponding function is not analytic at the origin. If the λ (α) n ultimately have strictly alternating signs, the series expansions for the power series coefficients still diverge, but are summable to something finite, and the resulting power series represents an analytic function. If algebraically decaying and ultimately alternating Laguerre series coefficients λ (α) n possess sufficiently simple explicit analytical expressions, the summation of the divergent series for the power series coefficients can often be accomplished with the help of analytic continuation formulae for hypergeometric series p+1 F p , but if the λ (α) n have a complicated structure or if only their numerical values are available, numerical summation techniques have to be employed. It is shown that certain nonlinear sequence transformations-in particular the so-called delta transformation (Weniger 1989 Comput. Phys. Rep. 10 189-371 (equation (8.4-4)))-are able to

  4. MOOC Design Workshop

    DEFF Research Database (Denmark)

    Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

    2016-01-01

    For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

  5. Level Design as Model Transformation

    NARCIS (Netherlands)

    Dormans, Joris

    2011-01-01

    This paper frames the process of designing a level in a game as a series of model transformations. The transformations correspond to the application of particular design principles, such as the use of locks and keys to transform a linear mission into a branching space. It shows that by using rewrite

  6. 4-H Science Inquiry Video Series

    Science.gov (United States)

    Green, Jeremy W.; Black, Lynette; Willis, Patrick

    2013-01-01

    Studies support science inquiry as a positive method and approach for 4-H professionals and volunteers to use for teaching science-based practices to youth. The development of a science inquiry video series has yielded positive results as it relates to youth development education and science. The video series highlights how to conduct science-rich…

  7. Health Psychology special series on health disparities

    NARCIS (Netherlands)

    Kazak, A.E.; Bosch, J.; Klonoff, E.A.

    2012-01-01

    With the initiation of this new ongoing special series in Health Psychology on health disparities, we will publish articles that highlight ways in which health psychology can contribute to understanding and ameliorating these disparities. We welcome articles for this new special series and

  8. Two Classes of Power Series and Applications

    Science.gov (United States)

    Chen, Hongwei

    2002-01-01

    In this note, using the method of undetermined coefficients, we obtain the power series for exp ( f ( x )) and ln ( f ( x )) by means of a simple recursion. As applications, we show how those power series can be used to reproduce and improve some well-known results in analysis. These results may be used as enrichment material in an advanced…

  9. Cuspidal discrete series for semisimple symmetric spaces

    DEFF Research Database (Denmark)

    Andersen, Nils Byrial; Flensted-Jensen, Mogens; Schlichtkrull, Henrik

    2012-01-01

    We propose a notion of cusp forms on semisimple symmetric spaces. We then study the real hyperbolic spaces in detail, and show that there exists both cuspidal and non-cuspidal discrete series. In particular, we show that all the spherical discrete series are non-cuspidal. (C) 2012 Elsevier Inc. All...

  10. SERI Biomass Program. FY 1983 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Corder, R.E.; Hill, A.M.; Lindsey, H.; Lowenstein, M.Z.; McIntosh, R.P.

    1984-02-01

    This report summarizes the progress and research accomplishments of the SERI Biomass Program during FY 1983. The SERI Biomass Program consists of three elements: Aquatic Species, Anaerobic Digestion, and Photo/Biological Hydrogen. Each element has been indexed separately. 2 references, 44 figures, 22 tables.

  11. Modelling conditional heteroscedasticity in nonstationary series

    NARCIS (Netherlands)

    Cizek, P.; Cizek, P.; Härdle, W.K.; Weron, R.

    2011-01-01

    A vast amount of econometrical and statistical research deals with modeling financial time series and their volatility, which measures the dispersion of a series at a point in time (i.e., conditional variance). Although financial markets have been experiencing many shorter and longer periods of

  12. The foundations of modern time series analysis

    CERN Document Server

    Mills, Terence C

    2011-01-01

    This book develops the analysis of Time Series from its formal beginnings in the 1890s through to the publication of Box and Jenkins' watershed publication in 1970, showing how these methods laid the foundations for the modern techniques of Time Series analysis that are in use today.

  13. Forecasting Enrollments with Fuzzy Time Series.

    Science.gov (United States)

    Song, Qiang; Chissom, Brad S.

    The concept of fuzzy time series is introduced and used to forecast the enrollment of a university. Fuzzy time series, an aspect of fuzzy set theory, forecasts enrollment using a first-order time-invariant model. To evaluate the model, the conventional linear regression technique is applied and the predicted values obtained are compared to the…

  14. Reprint Series: Geometric Constructions. RS-10.

    Science.gov (United States)

    Schaaf, William L., Ed.

    This is one in a series of SMSG supplementary and enrichment pamphlets for high school students. The series makes available expository articles which appeared in a variety of mathematical periodicals. Topics covered include: (1) Euclidean constructions; (2) the geometry of the fixed compass; (3) certain topics related to constructions with…

  15. Power Series Solution to the Pendulum Equation

    Science.gov (United States)

    Benacka, Jan

    2009-01-01

    This note gives a power series solution to the pendulum equation that enables to investigate the system in an analytical way only, i.e. to avoid numeric methods. A method of determining the number of the terms for getting a required relative error is presented that uses bigger and lesser geometric series. The solution is suitable for modelling the…

  16. Modeling Time Series Data for Supervised Learning

    Science.gov (United States)

    Baydogan, Mustafa Gokce

    2012-01-01

    Temporal data are increasingly prevalent and important in analytics. Time series (TS) data are chronological sequences of observations and an important class of temporal data. Fields such as medicine, finance, learning science and multimedia naturally generate TS data. Each series provide a high-dimensional data vector that challenges the learning…

  17. Euler Polynomials, Fourier Series and Zeta Numbers

    DEFF Research Database (Denmark)

    Scheufens, Ernst E

    2012-01-01

    Fourier series for Euler polynomials is used to obtain information about values of the Riemann zeta function for integer arguments greater than one. If the argument is even we recover the well-known exact values, if the argument is odd we find integral representations and rapidly convergent series....

  18. Series expansion of the modified Einstein Procedure

    Science.gov (United States)

    Seema Chandrakant Shah-Fairbank

    2009-01-01

    This study examines calculating total sediment discharge based on the Modified Einstein Procedure (MEP). A new procedure based on the Series Expansion of the Modified Einstein Procedure (SEMEP) has been developed. This procedure contains four main modifications to MEP. First, SEMEP solves the Einstein integrals quickly and accurately based on a series expansion. Next,...

  19. Statistical criteria for characterizing irradiance time series.

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Joshua S.; Ellis, Abraham; Hansen, Clifford W.

    2010-10-01

    We propose and examine several statistical criteria for characterizing time series of solar irradiance. Time series of irradiance are used in analyses that seek to quantify the performance of photovoltaic (PV) power systems over time. Time series of irradiance are either measured or are simulated using models. Simulations of irradiance are often calibrated to or generated from statistics for observed irradiance and simulations are validated by comparing the simulation output to the observed irradiance. Criteria used in this comparison should derive from the context of the analyses in which the simulated irradiance is to be used. We examine three statistics that characterize time series and their use as criteria for comparing time series. We demonstrate these statistics using observed irradiance data recorded in August 2007 in Las Vegas, Nevada, and in June 2009 in Albuquerque, New Mexico.

  20. Winged design; Befluegeltes Design

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Tilman

    2013-10-15

    Today the wind rotor blades are about 80 meter long. To keep them light and transportable designers and material scientists come up with a number of ideas. Will the carbon fiber prevail against the glass fiber? [German] Ueber 80 Meter messen die laengsten Rotorblaetter heute. Um sie leicht und transportfaehig zu halten, lassen sich Designer und Materialforscher einiges einfallen. Wird sich die Kohlefaser gegen die Glasfaser durchsetzen?.

  1. Microwave Photonic Architecture for Direction Finding of LPI Emitters: Front End Analog Circuit Design and Component Characterization

    Science.gov (United States)

    2016-09-01

    into two parts. The design, development, and testing efforts of the front-end microwave photonics circuit design and the system integration with the...miniature microwave - photonic phase-sampling DF technique is investigated in this thesis. This front-end design uses a combination of integrated optical...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. MICROWAVE

  2. Antinomies of Semiotics in Graphic Design

    Science.gov (United States)

    Storkerson, Peter

    2010-01-01

    The following paper assesses the roles played by semiotics in graphic design and in graphic design education, which both reflects and shapes practice. It identifies a series of factors; graphic design education methods and culture; semiotic theories themselves and their application to graphic design; the two wings of Peircian semiotics and…

  3. Design basis II: Design for events

    International Nuclear Information System (INIS)

    Frisch, W.

    1982-01-01

    In a lecture of this title, it could be expected that all events which are a basis for system and component design are described. According to the title of the Course 'Instrumentation and Control of Nuclear Power Plants' emphasis is put on events originating within the plant (no consideration of external events such as air plane crash or earth-quake). The lecture is divided into the two parts 'Transients' and 'Loss of coolant accidents (LOCAs)'. Due to the complex interaction between systems and components during transients, the first part is the main part of the lecture, while the second part (LOCAs) is only a very brief description of emergency core cooling system functions and the typical course of a large and small LOCA event. The first part on anticipated transients with intact primary coolant system boundary (non-LOCA-transients) covers several aspects of the analysis, such as classification, brief system description, transient description, analysis of anticipated transients without scram (ATWS) and analytical methods. Due to the time restriction necessary within the course, only a small section of the entire area can be presented in this paper. (orig.)

  4. An overview of research designs relevant to nursing: Part 1: quantitative research designs

    OpenAIRE

    Sousa,Valmi D.; Driessnack,Martha; Mendes,Isabel Amélia Costa

    2007-01-01

    This three part series of articles provides a brief overview of relevant research designs in nursing. The first article in the series presents the most frequently used quantitative research designs. Strategies for non-experimental and experimental research designs used to generate and refine nursing knowledge are described. In addition, the importance of quantitative designs and the role they play in developing evidence-based practice are discussed. Nursing care needs to be determined by the ...

  5. DETERMINING THE NEED FOR ZERO SERIES EXECUTION IN MANUFACTURING PROCESSES IN THE TEXTILE GARMENT INDUSTRY

    Directory of Open Access Journals (Sweden)

    OANA Ioan Pave

    2017-05-01

    Full Text Available Because the industrial production requires the application of some transformation procedures on the material resources, so that a clothing product comes out with optimal use value in terms of maximum economic efficiency, one of the main influencial factors is the quality of the products. To make manufacturing processes more efficient, it is necessary to carry out the zero series in order to ensure the quality of the technological processes, as well as to prevent some design deficiencies. Among the main operations undertaken to ensure the quality of the zero series, we mention: creating the conditions for launch, tracking and finalizing the accompanying production documents under similar series production conditions; zero-series producers are usually the same workers who make up the series production line; equipping with the appropriate equipment and providing with necessary devices in order to create the technical conditions for the execution of the zero series; providing technical assistance in relation to manufacturing and control documentation for eliminating the design deficiencies. This paper presents the architecture of the zero series execution in manufacturing processes in the textile garment industry. The information obtained from the zero-series analysis is directed to the technical support, for possible corrections of the patterns according to which the products were manufactured.

  6. Dansk Design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  7. Methods in Clinical Pharmacology Series

    Science.gov (United States)

    Beaumont, Claire; Young, Graeme C; Cavalier, Tom; Young, Malcolm A

    2014-01-01

    Human radiolabel studies are traditionally conducted to provide a definitive understanding of the human absorption, distribution, metabolism and excretion (ADME) properties of a drug. However, advances in technology over the past decade have allowed alternative methods to be employed to obtain both clinical ADME and pharmacokinetic (PK) information. These include microdose and microtracer approaches using accelerator mass spectrometry, and the identification and quantification of metabolites in samples from classical human PK studies using technologies suitable for non-radiolabelled drug molecules, namely liquid chromatography-mass spectrometry and nuclear magnetic resonance spectroscopy. These recently developed approaches are described here together with relevant examples primarily from experiences gained in support of drug development projects at GlaxoSmithKline. The advantages of these study designs together with their limitations are described. We also discuss special considerations which should be made for a successful outcome to these new approaches and also to the more traditional human radiolabel study in order to maximize knowledge around the human ADME properties of drug molecules. PMID:25041729

  8. SPE5 Sub-Scale Test Series Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Vandersall, Kevin S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reeves, Robert V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); DeHaven, Martin R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Strickland, Shawn L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-14

    A series of 2 SPE5 sub-scale tests were performed to experimentally confirm that a booster system designed and evaluated in prior tests would properly initiate the PBXN-110 case charge fill. To conduct the experiments, a canister was designed to contain the nominally 50 mm diameter booster tube with an outer fill of approximately 150 mm diameter by 150 mm in length. The canisters were filled with PBXN-110 at NAWS-China Lake and shipped back to LLNL for testing in the High Explosives Applications Facility (HEAF). Piezoelectric crystal pins were placed on the outside of the booster tube before filling, and a series of piezoelectric crystal pins along with Photonic Doppler Velocimetry (PDV) probes were placed on the outer surface of the canister to measure the relative timing and magnitude of the detonation. The 2 piezoelectric crystal pins integral to the booster design were also utilized along with a series of either piezoelectric crystal pins or piezoelectric polymer pads on the top of the canister or outside case that utilized direct contact, gaps, or different thicknesses of RTV cushions to obtain time of arrival data to evaluate the response in preparation for the large-scale SPE5 test. To further quantify the margin of the booster operation, the 1st test (SPE5SS1) was functioned with both detonators and the 2nd test (SPE5SS2) was functioned with only 1 detonator. A full detonation of the material was observed in both experiments as observed by the pin timing and PDV signals. The piezoelectric pads were found to provide a greater measured signal magnitude during the testing with an RTV layer present, and the improved response is due to the larger measurement surface area of the pad. This report will detail the experiment design, canister assembly for filling, final assembly, experiment firing, presentation of the diagnostic results, and a discussion of the results.

  9. Homogenising time series: beliefs, dogmas and facts

    Science.gov (United States)

    Domonkos, P.

    2011-06-01

    In the recent decades various homogenisation methods have been developed, but the real effects of their application on time series are still not known sufficiently. The ongoing COST action HOME (COST ES0601) is devoted to reveal the real impacts of homogenisation methods more detailed and with higher confidence than earlier. As a part of the COST activity, a benchmark dataset was built whose characteristics approach well the characteristics of real networks of observed time series. This dataset offers much better opportunity than ever before to test the wide variety of homogenisation methods, and analyse the real effects of selected theoretical recommendations. Empirical results show that real observed time series usually include several inhomogeneities of different sizes. Small inhomogeneities often have similar statistical characteristics than natural changes caused by climatic variability, thus the pure application of the classic theory that change-points of observed time series can be found and corrected one-by-one is impossible. However, after homogenisation the linear trends, seasonal changes and long-term fluctuations of time series are usually much closer to the reality than in raw time series. Some problems around detecting multiple structures of inhomogeneities, as well as that of time series comparisons within homogenisation procedures are discussed briefly in the study.

  10. Visibility Graph Based Time Series Analysis.

    Science.gov (United States)

    Stephen, Mutua; Gu, Changgui; Yang, Huijie

    2015-01-01

    Network based time series analysis has made considerable achievements in the recent years. By mapping mono/multivariate time series into networks, one can investigate both it's microscopic and macroscopic behaviors. However, most proposed approaches lead to the construction of static networks consequently providing limited information on evolutionary behaviors. In the present paper we propose a method called visibility graph based time series analysis, in which series segments are mapped to visibility graphs as being descriptions of the corresponding states and the successively occurring states are linked. This procedure converts a time series to a temporal network and at the same time a network of networks. Findings from empirical records for stock markets in USA (S&P500 and Nasdaq) and artificial series generated by means of fractional Gaussian motions show that the method can provide us rich information benefiting short-term and long-term predictions. Theoretically, we propose a method to investigate time series from the viewpoint of network of networks.

  11. Network structure of multivariate time series.

    Science.gov (United States)

    Lacasa, Lucas; Nicosia, Vincenzo; Latora, Vito

    2015-10-21

    Our understanding of a variety of phenomena in physics, biology and economics crucially depends on the analysis of multivariate time series. While a wide range tools and techniques for time series analysis already exist, the increasing availability of massive data structures calls for new approaches for multidimensional signal processing. We present here a non-parametric method to analyse multivariate time series, based on the mapping of a multidimensional time series into a multilayer network, which allows to extract information on a high dimensional dynamical system through the analysis of the structure of the associated multiplex network. The method is simple to implement, general, scalable, does not require ad hoc phase space partitioning, and is thus suitable for the analysis of large, heterogeneous and non-stationary time series. We show that simple structural descriptors of the associated multiplex networks allow to extract and quantify nontrivial properties of coupled chaotic maps, including the transition between different dynamical phases and the onset of various types of synchronization. As a concrete example we then study financial time series, showing that a multiplex network analysis can efficiently discriminate crises from periods of financial stability, where standard methods based on time-series symbolization often fail.

  12. Visibility Graph Based Time Series Analysis.

    Directory of Open Access Journals (Sweden)

    Mutua Stephen

    Full Text Available Network based time series analysis has made considerable achievements in the recent years. By mapping mono/multivariate time series into networks, one can investigate both it's microscopic and macroscopic behaviors. However, most proposed approaches lead to the construction of static networks consequently providing limited information on evolutionary behaviors. In the present paper we propose a method called visibility graph based time series analysis, in which series segments are mapped to visibility graphs as being descriptions of the corresponding states and the successively occurring states are linked. This procedure converts a time series to a temporal network and at the same time a network of networks. Findings from empirical records for stock markets in USA (S&P500 and Nasdaq and artificial series generated by means of fractional Gaussian motions show that the method can provide us rich information benefiting short-term and long-term predictions. Theoretically, we propose a method to investigate time series from the viewpoint of network of networks.

  13. Allan deviation analysis of financial return series

    Science.gov (United States)

    Hernández-Pérez, R.

    2012-05-01

    We perform a scaling analysis for the return series of different financial assets applying the Allan deviation (ADEV), which is used in the time and frequency metrology to characterize quantitatively the stability of frequency standards since it has demonstrated to be a robust quantity to analyze fluctuations of non-stationary time series for different observation intervals. The data used are opening price daily series for assets from different markets during a time span of around ten years. We found that the ADEV results for the return series at short scales resemble those expected for an uncorrelated series, consistent with the efficient market hypothesis. On the other hand, the ADEV results for absolute return series for short scales (first one or two decades) decrease following approximately a scaling relation up to a point that is different for almost each asset, after which the ADEV deviates from scaling, which suggests that the presence of clustering, long-range dependence and non-stationarity signatures in the series drive the results for large observation intervals.

  14. Series pid pitch controller of large wind turbines generator

    Directory of Open Access Journals (Sweden)

    Micić Aleksandar D.

    2015-01-01

    Full Text Available For this stable process with oscillatory dynamics, characterized with small damping ratio and dominant transport delay, design of the series PID pitch controller is based on the model obtained from the open-loop process step response, filtered with the second-order Butterworth filter Fbw. Performance of the series PID pitch controller, with the filter Fbw, is analyzed by simulations of the set-point and input/output disturbance responses, including simulations with a colored noise added to the control variable. Excellent performance/robustness tradeoff is obtained, compared to the recently proposed PI pitch controllers and to the modified internal model pitch controller, developed here, which has a natural mechanism to compensate effect of dominant transport delay. [Projekat Ministarstva nauke Republike Srbije, br. III 47016

  15. Transient voltage sharing in series-coupled high voltage switches

    Directory of Open Access Journals (Sweden)

    Editorial Office

    1992-07-01

    Full Text Available For switching voltages in excess of the maximum blocking voltage of a switching element (for example, thyristor, MOSFET or bipolar transistor such elements are often coupled in series - and additional circuitry has to be provided to ensure equal voltage sharing. Between each such series element and system ground there is a certain parasitic capacitance that may draw a significant current during high-speed voltage transients. The "open" switch is modelled as a ladder network. Analy­sis reveals an exponential progression in the distribution of the applied voltage across the elements. Overstressing thus oc­curs in some of the elements at levels of the total voltage that are significantly below the design value. This difficulty is overcome by grading the voltage sharing circuitry, coupled in parallel with each element, in a prescribed manner, as set out here.

  16. A multidisciplinary database for geophysical time series management

    Science.gov (United States)

    Montalto, P.; Aliotta, M.; Cassisi, C.; Prestifilippo, M.; Cannata, A.

    2013-12-01

    The variables collected by a sensor network constitute a heterogeneous data source that needs to be properly organized in order to be used in research and geophysical monitoring. With the time series term we refer to a set of observations of a given phenomenon acquired sequentially in time. When the time intervals are equally spaced one speaks of period or sampling frequency. Our work describes in detail a possible methodology for storage and management of time series using a specific data structure. We designed a framework, hereinafter called TSDSystem (Time Series Database System), in order to acquire time series from different data sources and standardize them within a relational database. The operation of standardization provides the ability to perform operations, such as query and visualization, of many measures synchronizing them using a common time scale. The proposed architecture follows a multiple layer paradigm (Loaders layer, Database layer and Business Logic layer). Each layer is specialized in performing particular operations for the reorganization and archiving of data from different sources such as ASCII, Excel, ODBC (Open DataBase Connectivity), file accessible from the Internet (web pages, XML). In particular, the loader layer performs a security check of the working status of each running software through an heartbeat system, in order to automate the discovery of acquisition issues and other warning conditions. Although our system has to manage huge amounts of data, performance is guaranteed by using a smart partitioning table strategy, that keeps balanced the percentage of data stored in each database table. TSDSystem also contains modules for the visualization of acquired data, that provide the possibility to query different time series on a specified time range, or follow the realtime signal acquisition, according to a data access policy from the users.

  17. Designing Inclusive Systems Designing Inclusion for Real-world Applications

    CERN Document Server

    Clarkson, John; Robinson, Peter; Lazar, Jonathan; Heylighen, Ann

    2012-01-01

    The Cambridge Workshops on Universal Access and Assistive Technology (CWUAAT) are a series of workshops held at a Cambridge University College every two years. The workshop theme: “Designing inclusion for real-world applications” refers to the emerging potential and relevance of the latest generations of inclusive design thinking, tools, techniques, and data, to mainstream project applications such as healthcare and the design of working environments. Inclusive Design Research involves developing tools and guidance enabling product designers to design for the widest possible population, for a given range of capabilities. There are five main themes: •Designing for the Real-World •Measuring Demand And Capabilities •Designing Cognitive Interaction with Emerging Technologies •Design for Inclusion •Designing Inclusive Architecture In the tradition of CWUAAT, we have solicited and accepted contributions over a wide range of topics, both within individual themes and also across the workshop’s scope. ...

  18. UX Design Innovation

    DEFF Research Database (Denmark)

    Dove, Graham; Halskov, Kim; Forlizzi, Jodi

    2017-01-01

    be because it is a new and difficult design material. To better understand why we have witnessed little design innovation, we conducted a survey of current UX practitioners with regards to how new ML services are envisioned and developed in UX practice. Our survey probed on how ML may or may not have been...... a part of their UX design education, on how they work to create new things with developers, and on the challenges they have faced working with this material. We use the findings from this survey and our review of related literature to present a series of challenges for UX and interaction design research...... and education. Finally, we discuss areas where new research and new curriculum might help our community unlock the power of design thinking to re-imagine what ML might be and might do....

  19. Quantum Dilogarithms and Partition q-Series

    Science.gov (United States)

    Kato, Akishi; Terashima, Yuji

    2015-08-01

    In our previous work (Kato and Terashima, Commun Math Phys. arXiv:1403.6569, 2014), we introduced the partition q-series for mutation loop γ—a loop in exchange quiver. In this paper, we show that for a certain class of mutation sequences, called reddening sequences, the graded version of partition q-series essentially coincides with the ordered product of quantum dilogarithm associated with each mutation; the partition q-series provides a state-sum description of combinatorial Donaldson-Thomas invariants introduced by Keller.

  20. Case Series Investigations in Cognitive Neuropsychology

    Science.gov (United States)

    Schwartz, Myrna F.; Dell, Gary S.

    2011-01-01

    Case series methodology involves the systematic assessment of a sample of related patients, with the goal of understanding how and why they differ from one another. This method has become increasingly important in cognitive neuropsychology, which has long been identified with single-subject research. We review case series studies dealing with impaired semantic memory, reading, and language production, and draw attention to the affinity of this methodology for testing theories that are expressed as computational models and for addressing questions about neuroanatomy. It is concluded that case series methods usefully complement single-subject techniques. PMID:21714756

  1. Time series modeling, computation, and inference

    CERN Document Server

    Prado, Raquel

    2010-01-01

    The authors systematically develop a state-of-the-art analysis and modeling of time series. … this book is well organized and well written. The authors present various statistical models for engineers to solve problems in time series analysis. Readers no doubt will learn state-of-the-art techniques from this book.-Hsun-Hsien Chang, Computing Reviews, March 2012My favorite chapters were on dynamic linear models and vector AR and vector ARMA models.-William Seaver, Technometrics, August 2011… a very modern entry to the field of time-series modelling, with a rich reference list of the current lit

  2. Time Series Analysis Forecasting and Control

    CERN Document Server

    Box, George E P; Reinsel, Gregory C

    2011-01-01

    A modernized new edition of one of the most trusted books on time series analysis. Since publication of the first edition in 1970, Time Series Analysis has served as one of the most influential and prominent works on the subject. This new edition maintains its balanced presentation of the tools for modeling and analyzing time series and also introduces the latest developments that have occurred n the field over the past decade through applications from areas such as business, finance, and engineering. The Fourth Edition provides a clearly written exploration of the key methods for building, cl

  3. Formulating and testing a method for perturbing precipitation time series to reflect anticipated climatic changes

    DEFF Research Database (Denmark)

    Sørup, Hjalte Jomo Danielsen; Georgiadis, Stylianos; Gregersen, Ida Bülow

    2017-01-01

    Urban water infrastructure has very long planning horizons, and planning is thus very dependent on reliable estimates of the impacts of climate change. Many urban water systems are designed using time series with a high temporal resolution. To assess the impact of climate change on these systems......, similarly high-resolution precipitation time series for future climate are necessary. Climate models cannot at their current resolutions provide these time series at the relevant scales. Known methods for stochastic downscaling of climate change to urban hydrological scales have known shortcomings...... in constructing realistic climate-changed precipitation time series at the sub-hourly scale. In the present study we present a deterministic methodology to perturb historical precipitation time series at the minute scale to reflect non-linear expectations to climate change. The methodology shows good skill...

  4. App. 1. Fourier series and Fourier transform

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Definitions, formulas and practical properties in quantum mechanics are presented: Fourier series (development of periodic function, Bessel-Parseval equality); Fourier transform (Parseval-Plancherel formula, Fourier transform in three-dimensional space) [fr

  5. Detecting nonlinear structure in time series

    International Nuclear Information System (INIS)

    Theiler, J.

    1991-01-01

    We describe an approach for evaluating the statistical significance of evidence for nonlinearity in a time series. The formal application of our method requires the careful statement of a null hypothesis which characterizes a candidate linear process, the generation of an ensemble of ''surrogate'' data sets which are similar to the original time series but consistent with the null hypothesis, and the computation of a discriminating statistic for the original and for each of the surrogate data sets. The idea is to test the original time series against the null hypothesis by checking whether the discriminating statistic computed for the original time series differs significantly from the statistics computed for each of the surrogate sets. While some data sets very cleanly exhibit low-dimensional chaos, there are many cases where the evidence is sketchy and difficult to evaluate. We hope to provide a framework within which such claims of nonlinearity can be evaluated. 5 refs., 4 figs

  6. Nonparametric factor analysis of time series

    OpenAIRE

    Rodríguez-Poo, Juan M.; Linton, Oliver Bruce

    1998-01-01

    We introduce a nonparametric smoothing procedure for nonparametric factor analaysis of multivariate time series. The asymptotic properties of the proposed procedures are derived. We present an application based on the residuals from the Fair macromodel.

  7. WDM Research Series: Working Paper No. 2

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    The other three papers of the Series focus on the issues of institutional structures ... Any approach that relates WDM to poverty and equity requires a set of working ..... If local irrigation system operation and maintenance investments and.

  8. Applied time series analysis and innovative computing

    CERN Document Server

    Ao, Sio-Iong

    2010-01-01

    This text is a systematic, state-of-the-art introduction to the use of innovative computing paradigms as an investigative tool for applications in time series analysis. It includes frontier case studies based on recent research.

  9. Normed algebras and the geometric series test

    Directory of Open Access Journals (Sweden)

    Robert Kantrowitz

    2017-11-01

    Full Text Available The purpose of this article is to survey a class of normed algebras that share many central features of Banach algebras, save for completeness. The likeness of these algebras to Banach algebras derives from the fact that the geometric series test is valid, whereas the lack of completeness points to the failure of the absolute convergence test for series in the algebra. Our main result is a compendium of conditions that are all equivalent to the validity of the geometric series test for commutative unital normed algebras. Several examples in the final section showcase some incomplete normed algebras for which the geometric series test is valid, and still others for which it is not.

  10. Measuring multiscaling in financial time-series

    International Nuclear Information System (INIS)

    Buonocore, R.J.; Aste, T.; Di Matteo, T.

    2016-01-01

    We discuss the origin of multiscaling in financial time-series and investigate how to best quantify it. Our methodology consists in separating the different sources of measured multifractality by analyzing the multi/uni-scaling behavior of synthetic time-series with known properties. We use the results from the synthetic time-series to interpret the measure of multifractality of real log-returns time-series. The main finding is that the aggregation horizon of the returns can introduce a strong bias effect on the measure of multifractality. This effect can become especially important when returns distributions have power law tails with exponents in the range (2, 5). We discuss the right aggregation horizon to mitigate this bias.

  11. Data Mining Smart Energy Time Series

    Directory of Open Access Journals (Sweden)

    Janina POPEANGA

    2015-07-01

    Full Text Available With the advent of smart metering technology the amount of energy data will increase significantly and utilities industry will have to face another big challenge - to find relationships within time-series data and even more - to analyze such huge numbers of time series to find useful patterns and trends with fast or even real-time response. This study makes a small review of the literature in the field, trying to demonstrate how essential is the application of data mining techniques in the time series to make the best use of this large quantity of data, despite all the difficulties. Also, the most important Time Series Data Mining techniques are presented, highlighting their applicability in the energy domain.

  12. Complex network approach to fractional time series

    Energy Technology Data Exchange (ETDEWEB)

    Manshour, Pouya [Physics Department, Persian Gulf University, Bushehr 75169 (Iran, Islamic Republic of)

    2015-10-15

    In order to extract correlation information inherited in stochastic time series, the visibility graph algorithm has been recently proposed, by which a time series can be mapped onto a complex network. We demonstrate that the visibility algorithm is not an appropriate one to study the correlation aspects of a time series. We then employ the horizontal visibility algorithm, as a much simpler one, to map fractional processes onto complex networks. The degree distributions are shown to have parabolic exponential forms with Hurst dependent fitting parameter. Further, we take into account other topological properties such as maximum eigenvalue of the adjacency matrix and the degree assortativity, and show that such topological quantities can also be used to predict the Hurst exponent, with an exception for anti-persistent fractional Gaussian noises. To solve this problem, we take into account the Spearman correlation coefficient between nodes' degrees and their corresponding data values in the original time series.

  13. An introduction to Fourier series and integrals

    CERN Document Server

    Seeley, Robert T

    2006-01-01

    This compact guide emphasizes the relationship between physics and mathematics, introducing Fourier series in the way that Fourier himself used them: as solutions of the heat equation in a disk. 1966 edition.

  14. Entropic Analysis of Electromyography Time Series

    Science.gov (United States)

    Kaufman, Miron; Sung, Paul

    2005-03-01

    We are in the process of assessing the effectiveness of fractal and entropic measures for the diagnostic of low back pain from surface electromyography (EMG) time series. Surface electromyography (EMG) is used to assess patients with low back pain. In a typical EMG measurement, the voltage is measured every millisecond. We observed back muscle fatiguing during one minute, which results in a time series with 60,000 entries. We characterize the complexity of time series by computing the Shannon entropy time dependence. The analysis of the time series from different relevant muscles from healthy and low back pain (LBP) individuals provides evidence that the level of variability of back muscle activities is much larger for healthy individuals than for individuals with LBP. In general the time dependence of the entropy shows a crossover from a diffusive regime to a regime characterized by long time correlations (self organization) at about 0.01s.

  15. Time series prediction: statistical and neural techniques

    Science.gov (United States)

    Zahirniak, Daniel R.; DeSimio, Martin P.

    1996-03-01

    In this paper we compare the performance of nonlinear neural network techniques to those of linear filtering techniques in the prediction of time series. Specifically, we compare the results of using the nonlinear systems, known as multilayer perceptron and radial basis function neural networks, with the results obtained using the conventional linear Wiener filter, Kalman filter and Widrow-Hoff adaptive filter in predicting future values of stationary and non- stationary time series. Our results indicate the performance of each type of system is heavily dependent upon the form of the time series being predicted and the size of the system used. In particular, the linear filters perform adequately for linear or near linear processes while the nonlinear systems perform better for nonlinear processes. Since the linear systems take much less time to be developed, they should be tried prior to using the nonlinear systems when the linearity properties of the time series process are unknown.

  16. Public invited to Appalachian Studies Film Series

    OpenAIRE

    Elliott, Jean

    2004-01-01

    The Appalachian Studies Program at Virginia Tech is hosting a series of notable artistic and documentary films. The films deal with themes or issues covered in Appalachian Studies courses and are organized historically, touching upon issues common to all Appalachians.

  17. Turbulencelike Behavior of Seismic Time Series

    International Nuclear Information System (INIS)

    Manshour, P.; Saberi, S.; Sahimi, Muhammad; Peinke, J.; Pacheco, Amalio F.; Rahimi Tabar, M. Reza

    2009-01-01

    We report on a stochastic analysis of Earth's vertical velocity time series by using methods originally developed for complex hierarchical systems and, in particular, for turbulent flows. Analysis of the fluctuations of the detrended increments of the series reveals a pronounced transition in their probability density function from Gaussian to non-Gaussian. The transition occurs 5-10 hours prior to a moderate or large earthquake, hence representing a new and reliable precursor for detecting such earthquakes

  18. Posn(R) and Eisenstein series

    CERN Document Server

    Jorgenson, Jay

    2005-01-01

    Posn(R) and Eisenstein Series provides an introduction, requiring minimal prerequisites, to the analysis on symmetric spaces of positive definite real matrices as well as quotients of this space by the unimodular group of integral matrices. The approach is presented in very classical terms and includes material on special functions, notably gamma and Bessel functions, and focuses on certain mathematical aspects of Eisenstein series.

  19. Genealogical series method. Hyperpolar points screen effect

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1991-01-01

    The fundamental values of the genealogical series method -the genealogical integrals (sandwiches) have been investigated. The hyperpolar points screen effect has been found. It allows one to calculate the sandwiches for the Fermion systems with large number of particles and to ascertain the validity of the iterated-potential method as well. For the first time the genealogical-series method has been realized numerically for the central spin-independent potential

  20. Index to the Understanding the Atom Series

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The U. S. Atomic Energy Commission publishes the Understanding the Atom Series of educational booklets for high school science students and their teachers. This series explains many aspects of nuclear science including its history and applications. Because these 51 booklets cover such a variety of scientific fields, this index was prepared to help the reader find quickly those booklets that contain the information he needs.

  1. Global impact of Danish drama series

    DEFF Research Database (Denmark)

    Jensen, Pia Majbritt

    2016-01-01

    In recent years Danish TV series have experienced a global export boom. This article maps the regional and global export patterns over the last fifteen years in order to assess the international impact of Danish TV drama.......In recent years Danish TV series have experienced a global export boom. This article maps the regional and global export patterns over the last fifteen years in order to assess the international impact of Danish TV drama....

  2. Harry Potter book series - trivial or not?

    Directory of Open Access Journals (Sweden)

    Brigita Pavšič

    2006-12-01

    Full Text Available The article explores  the extcnt to which the features  of trivial literature appear in the Harry Potter series by J. K. Rowling.This is done in comparison with another popular children's series, The Famous Five by Enid Blyton, which was analysed  by Igor Saksida. The main focus of the analysis is on the schematic representation of plot, characters and the exotic nature of the setting and time of the stories.

  3. Multivariate Time Series Decomposition into Oscillation Components.

    Science.gov (United States)

    Matsuda, Takeru; Komaki, Fumiyasu

    2017-08-01

    Many time series are considered to be a superposition of several oscillation components. We have proposed a method for decomposing univariate time series into oscillation components and estimating their phases (Matsuda & Komaki, 2017 ). In this study, we extend that method to multivariate time series. We assume that several oscillators underlie the given multivariate time series and that each variable corresponds to a superposition of the projections of the oscillators. Thus, the oscillators superpose on each variable with amplitude and phase modulation. Based on this idea, we develop gaussian linear state-space models and use them to decompose the given multivariate time series. The model parameters are estimated from data using the empirical Bayes method, and the number of oscillators is determined using the Akaike information criterion. Therefore, the proposed method extracts underlying oscillators in a data-driven manner and enables investigation of phase dynamics in a given multivariate time series. Numerical results show the effectiveness of the proposed method. From monthly mean north-south sunspot number data, the proposed method reveals an interesting phase relationship.

  4. [Deficiency, disability, neurology and television series].

    Science.gov (United States)

    Collado-Vázquez, Susana; Martínez-Martínez, Ariadna; Cano-de-la-Cuerda, Roberto

    2015-06-01

    The portrayal of neurological disability and deficiency on television has not always been approached in the same way, but has instead tended to reflect the standpoint taken by society with regard to these issues and how they are dealt with according to the prevailing conceptions and values at each particular time. To address the appearance of neurological pathologies in television series and to ponder on the image they have in such contexts. Deficiency and disability of neurological origin have often been depicted on television in series, telefilms and documentaries, and in a wide variety of ways. Here we examine different television series and how they have dealt with neurological pathology, its diagnosis and its treatment, as well as the figure of the healthcare professional and social-familial adaptation. Examples cited include series such as House MD, Glee, American Horror Story, Homeland or Game of Thrones. Television series are a useful tool for making some neurological pathologies better known to the public and for dispelling the myths surrounding others, provided that the pathologies are dealt with in a realistic manner, which is not always the case. More care should be taken with regard to the way in which health professionals are portrayed in television series, as it is not always done correctly and may mislead viewers, who take what they see on the TV as being real.

  5. Fragrance series testing in eyelid dermatitis.

    Science.gov (United States)

    Wenk, Kurt S; Ehrlich, Alison

    2012-01-01

    Allergic contact dermatitis is considered one of the most common causes of eyelid dermatitis. In addition to metals and topical antibiotics, fragrances have emerged as a leading source of contact allergy for individuals with this condition. The objective of this study was to determine the added benefit of including a fragrance tray when patch testing patients presenting with eyelid dermatitis. During a 4.5-year period, all patients with suspected allergic contact dermatitis involving the eyelids were patch tested with both standard and fragrance trays. One hundred consecutive patients with eyelid dermatitis were patch tested. Of these patients, 42 (42%) tested positive for 1 or more allergens within the fragrance series. Of these patients, 15 (36%) had no fragrance markers detected on the standard series, and these allergens would therefore have been missed had fragrance series testing not been performed. Overall, fragrance markers within the standard series detected 73.2% (41/56) of cases of fragrance allergy. Our results suggest that there may be a significant benefit to fragrance series testing in patients with eyelid dermatitis. Fragrance tray inclusion in this population may identify additional cases of fragrance allergy that are missed by the standard series.

  6. Detecting chaos in irregularly sampled time series.

    Science.gov (United States)

    Kulp, C W

    2013-09-01

    Recently, Wiebe and Virgin [Chaos 22, 013136 (2012)] developed an algorithm which detects chaos by analyzing a time series' power spectrum which is computed using the Discrete Fourier Transform (DFT). Their algorithm, like other time series characterization algorithms, requires that the time series be regularly sampled. Real-world data, however, are often irregularly sampled, thus, making the detection of chaotic behavior difficult or impossible with those methods. In this paper, a characterization algorithm is presented, which effectively detects chaos in irregularly sampled time series. The work presented here is a modification of Wiebe and Virgin's algorithm and uses the Lomb-Scargle Periodogram (LSP) to compute a series' power spectrum instead of the DFT. The DFT is not appropriate for irregularly sampled time series. However, the LSP is capable of computing the frequency content of irregularly sampled data. Furthermore, a new method of analyzing the power spectrum is developed, which can be useful for differentiating between chaotic and non-chaotic behavior. The new characterization algorithm is successfully applied to irregularly sampled data generated by a model as well as data consisting of observations of variable stars.

  7. Measurements of Overtopping Flow Time Series on the Wave Dragon, Wave Energy Converter

    DEFF Research Database (Denmark)

    Tedd, James; Kofoed, Jens Peter

    2009-01-01

    A study of overtopping flow series on the Wave Dragon prototype, a low crested device designed to maximise flow, in a real sea, is presented. This study aims to fill the gap in the literature on time series of flow overtopping low crested structures. By comparing to a simulated flow the character......A study of overtopping flow series on the Wave Dragon prototype, a low crested device designed to maximise flow, in a real sea, is presented. This study aims to fill the gap in the literature on time series of flow overtopping low crested structures. By comparing to a simulated flow...... the characteristics of the overtopping flow are discussed and the simulation algorithm is tested. Measured data is shown from a storm build up in October 2006, from theWave Dragon prototype situated in an inland sea in Northern Denmark. This wave energy converter extracts energy from the waves, by funnelling them...

  8. Event-based stochastic point rainfall resampling for statistical replication and climate projection of historical rainfall series

    DEFF Research Database (Denmark)

    Thorndahl, Søren; Korup Andersen, Aske; Larsen, Anders Badsberg

    2017-01-01

    Continuous and long rainfall series are a necessity in rural and urban hydrology for analysis and design purposes. Local historical point rainfall series often cover several decades, which makes it possible to estimate rainfall means at different timescales, and to assess return periods of extreme...... includes climate changes projected to a specific future period. This paper presents a framework for resampling of historical point rainfall series in order to generate synthetic rainfall series, which has the same statistical properties as an original series. Using a number of key target predictions...... for the future climate, such as winter and summer precipitation, and representation of extreme events, the resampled historical series are projected to represent rainfall properties in a future climate. Climate-projected rainfall series are simulated by brute force randomization of model parameters, which leads...

  9. Validation of the Nuclear Design Method for MOX Fuel Loaded LWR Cores

    International Nuclear Information System (INIS)

    Saji, E.; Inoue, Y.; Mori, M.; Ushio, T.

    2001-01-01

    The actual batch loading of mixed-oxide (MOX) fuel in light water reactors (LWRs) is now ready to start in Japan. One of the efforts that have been devoted to realizing this batch loading has been validation of the nuclear design methods calculating the MOX-fuel-loaded LWR core characteristics. This paper summarizes the validation work for the applicability of the CASMO-4/SIMULATE-3 in-core fuel management code system to MOX-fuel-loaded LWR cores. This code system is widely used by a number of electric power companies for the core management of their commercial LWRs. The validation work was performed for both boiling water reactor (BWR) and pressurized water reactor (PWR) applications. Each validation consists of two parts: analyses of critical experiments and core tracking calculations of operating plants. For the critical experiments, we have chosen a series of experiments known as the VENUS International Program (VIP), which was performed at the SCK/CEN MOL laboratory in Belgium. VIP consists of both BWR and PWR fuel assembly configurations. As for the core tracking calculations, the operating data of MOX-fuel-loaded BWR and PWR cores in Europe have been utilized

  10. Highly comparative time-series analysis: the empirical structure of time series and their methods.

    Science.gov (United States)

    Fulcher, Ben D; Little, Max A; Jones, Nick S

    2013-06-06

    The process of collecting and organizing sets of observations represents a common theme throughout the history of science. However, despite the ubiquity of scientists measuring, recording and analysing the dynamics of different processes, an extensive organization of scientific time-series data and analysis methods has never been performed. Addressing this, annotated collections of over 35 000 real-world and model-generated time series, and over 9000 time-series analysis algorithms are analysed in this work. We introduce reduced representations of both time series, in terms of their properties measured by diverse scientific methods, and of time-series analysis methods, in terms of their behaviour on empirical time series, and use them to organize these interdisciplinary resources. This new approach to comparing across diverse scientific data and methods allows us to organize time-series datasets automatically according to their properties, retrieve alternatives to particular analysis methods developed in other scientific disciplines and automate the selection of useful methods for time-series classification and regression tasks. The broad scientific utility of these tools is demonstrated on datasets of electroencephalograms, self-affine time series, heartbeat intervals, speech signals and others, in each case contributing novel analysis techniques to the existing literature. Highly comparative techniques that compare across an interdisciplinary literature can thus be used to guide more focused research in time-series analysis for applications across the scientific disciplines.

  11. Steel designers' manual

    CERN Document Server

    Owens, Graham W

    2011-01-01

    In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 - EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption

  12. Simplified design of filter circuits

    CERN Document Server

    Lenk, John

    1999-01-01

    Simplified Design of Filter Circuits, the eighth book in this popular series, is a step-by-step guide to designing filters using off-the-shelf ICs. The book starts with the basic operating principles of filters and common applications, then moves on to describe how to design circuits by using and modifying chips available on the market today. Lenk's emphasis is on practical, simplified approaches to solving design problems.Contains practical designs using off-the-shelf ICsStraightforward, no-nonsense approachHighly illustrated with manufacturer's data sheets

  13. Inlet design for high-speed propfans

    Science.gov (United States)

    Little, B. H., Jr.; Hinson, B. L.

    1982-01-01

    A two-part study was performed to design inlets for high-speed propfan installation. The first part was a parametric study to select promising inlet concepts. A wide range of inlet geometries was examined and evaluated - primarily on the basis of cruise thrust and fuel burn performance. Two inlet concepts were than chosen for more detailed design studies - one apropriate to offset engine/gearbox arrangements and the other to in-line arrangements. In the second part of this study, inlet design points were chosen to optimize the net installed thrust, and detailed design of the two inlet configurations was performed. An analytical methodology was developed to account for propfan slipstream effects, transonic flow efects, and three-dimensional geometry effects. Using this methodology, low drag cowls were designed for the two inlets.

  14. Controlled generation of a single Trichel pulse and a series of single Trichel pulses in air

    Science.gov (United States)

    Mizeraczyk, Jerzy; Berendt, Artur; Akishev, Yuri

    2018-04-01

    In this paper, a simple method for the controlled generation of a single Trichel pulse or a series of single Trichel pulses of a regulated repetition frequency in air is proposed. The concept of triggering a single Trichel pulse or a series of such pulses is based on the precise controlling the voltage inception of the negative corona, which can be accomplished through the use of a ramp voltage pulse or a series of such pulses with properly chosen ramp voltage pulse parameters (rise and fall times, and ramp voltage pulse repetition frequency). The proposal has been tested in experiments using a needle-to-plate electrode arrangement in air, and reproducible Trichel pulses (single or in a series) were obtained by triggering them with an appropriately designed voltage waveform. The proposed method and results obtained have been qualitatively analysed. The analysis provides guidance for designing the voltage ramp pulse in respect of the generation of a single Trichel pulse or a series of single Trichel pulses. The controlled generation of a single Trichel pulse or a series of such pulses would be a helpful research tool for the refined studies of the fundamental processes in a negative corona discharge in a single- (air is an example) and multi-phase gaseous fluids. The controlled generation of a single Trichel pulse or a series of Trichel pulses can also be attractive for those corona treatments which need manipulation of the electric charge and heat portions delivered by the Trichel pulses to the object.

  15. Test performance of the QSE series of 5 cm aperture quadrupole model magnets

    International Nuclear Information System (INIS)

    Archer, B.; Bein, D.; Cunningham, G.; DiMarco, J.; Gathright, T.; Jayakumar, J.; LaBarge, A.; Li, W.; Lambert, D.; Scott, M.

    1994-01-01

    A 5 cm aperture quadrupole design, the QSE series of magnets were the first to be tested in the Short Magnet and Cable Test Laboratory (SMCTL) at the SSCL. Test performance of the first two magnets of the series are presented, including quench performance, quench localization, strain gage readings, and magnetic measurements. Both magnets behaved reasonably well with no quenches below the collider operating current, four training quenches to plateau, and good training memory between thermal cycles. Future magnets in the QSE series will be used to reduce the initial training and to tune out unwanted magnetic harmonics

  16. Test performance of the QSE series of 5 cm aperture quadrupole model magnets

    International Nuclear Information System (INIS)

    Archer, B.; Bein, D.; Cunningham, G.; DiMarco, J.; Gathright, T.; Jayakumar, J.; Labarge, A.; Li, W.; Lambert, D.; Scott, M.; Snitchler, G.; Zeigler, R.

    1993-04-01

    A 5 cm aperture quadrupole design, the QSE series of magnets were the first to be tested in the Short Magnet and Cable Test Laboratory (SMCTL) at the SSCL. Test performance of the first two magnets of the series are presented, including quench performance, quench localization, strain gage readings, and magnetic measurements.Both magnets behaved reasonably well with no quenches below the collider operating current, four training quenches to plateau, and good training memory between thermal cycles. Future magnets in the QSE series will be used to reduce the initial training and to tune out unwanted magnetic harmonics

  17. Thermophysical properties of freons methane series, pt.1

    CERN Document Server

    1987-01-01

    These are the succeeding volumes of a series of books on thermodynamic properties of engineering materials prepared under the auspices of the State Service of Standard Reference data of the Soviet Union. Each volume is set up in the same way: Part I deals with a study of all necessary aspects of experimental data interpretation and analysis; Part II then presents the fundamental constants, symbols with units, and data tables. Researchers and engineers in the fields of process design, equipment development, custody transfer and safety will find these book valuable and reliable reference sources for their respective tasks.

  18. Extracting the relevant delays in time series modelling

    DEFF Research Database (Denmark)

    Goutte, Cyril

    1997-01-01

    selection, and more precisely stepwise forward selection. The method is compared to other forward selection schemes, as well as to a nonparametric tests aimed at estimating the embedding dimension of time series. The final application extends these results to the efficient estimation of FIR filters on some......In this contribution, we suggest a convenient way to use generalisation error to extract the relevant delays from a time-varying process, i.e. the delays that lead to the best prediction performance. We design a generalisation-based algorithm that takes its inspiration from traditional variable...

  19. SaaS Platform for Time Series Data Handling

    Science.gov (United States)

    Oplachko, Ekaterina; Rykunov, Stanislav; Ustinin, Mikhail

    2018-02-01

    The paper is devoted to the description of MathBrain, a cloud-based resource, which works as a "Software as a Service" model. It is designed to maximize the efficiency of the current technology and to provide a tool for time series data handling. The resource provides access to the following analysis methods: direct and inverse Fourier transforms, Principal component analysis and Independent component analysis decompositions, quantitative analysis, magnetoencephalography inverse problem solution in a single dipole model based on multichannel spectral data.

  20. Cogeneration using small sized series connected units: Feasibility study

    International Nuclear Information System (INIS)

    Tondelli, F.; Bergamini, G.

    1992-01-01

    This paper evidences the technical/economic feasibility of the use of methane fuelled modular cogeneration systems based on small series connected Otto or Diesel cycle engines delivering from 20 to 90 kW of power. Ample reference is made to the successful application of modular cogeneration systems to supply low temperature thermal energy to hospitals, hotels, food processing firms, etc., in Italy. The cost benefit analysis covers many aspects: design, manufacturing, operation, performance, maintenance and safety. Suggestions are also made as to optimum contractual arrangements for equipment service and maintenance, as well as, for the exchange of power with local utilities