Joint Segmentation of Multiple Thoracic Organs in CT Images with Two Collaborative Deep Architectures.

Science.gov (United States)

Trullo, Roger; Petitjean, Caroline; Nie, Dong; Shen, Dinggang; Ruan, Su

2017-09-01

Computed Tomography (CT) is the standard imaging technique for radiotherapy planning. The delineation of Organs at Risk (OAR) in thoracic CT images is a necessary step before radiotherapy, for preventing irradiation of healthy organs. However, due to low contrast, multi-organ segmentation is a challenge. In this paper, we focus on developing a novel framework for automatic delineation of OARs. Different from previous works in OAR segmentation where each organ is segmented separately, we propose two collaborative deep architectures to jointly segment all organs, including esophagus, heart, aorta and trachea. Since most of the organ borders are ill-defined, we believe spatial relationships must be taken into account to overcome the lack of contrast. The aim of combining two networks is to learn anatomical constraints with the first network, which will be used in the second network, when each OAR is segmented in turn. Specifically, we use the first deep architecture, a deep SharpMask architecture, for providing an effective combination of low-level representations with deep high-level features, and then take into account the spatial relationships between organs by the use of Conditional Random Fields (CRF). Next, the second deep architecture is employed to refine the segmentation of each organ by using the maps obtained on the first deep architecture to learn anatomical constraints for guiding and refining the segmentations. Experimental results show superior performance on 30 CT scans, comparing with other state-of-the-art methods.

Implementations of a four-level mechanical architecture for fault-tolerant robots

International Nuclear Information System (INIS)

Hooper, Richard; Sreevijayan, Dev; Tesar, Delbert; Geisinger, Joseph; Kapoor, Chelan

1996-01-01

This paper describes a fault tolerant mechanical architecture with four levels devised and implemented in concert with NASA (Tesar, D. and Sreevijayan, D., Four-level fault tolerance in manipulator design for space operations. In First Int. Symp. Measurement and Control in Robotics (ISMCR '90), Houston, Texas, 20-22 June 1990.) Subsequent work has clarified and revised the architecture. The four levels proceed from fault tolerance at the actuator level, to fault tolerance via in-parallel chains, to fault tolerance using serial kinematic redundancy, and finally to the fault tolerance multiple arm systems provide. This is a subsumptive architecture because each successive layer can incorporate the fault tolerance provided by all layers beneath. For instance a serially-redundant robot can incorporate dual fault-tolerant actuators. Redundant systems provide the fault tolerance, but the guiding principle of this architecture is that functional redundancies actively increase the performance of the system. Redundancies do not simply remain dormant until needed. This paper includes specific examples of hardware and/or software implementation at all four levels

Service Oriented Architecture for High Level Applications

International Nuclear Information System (INIS)

Chu, P.

2012-01-01

Standalone high level applications often suffer from poor performance and reliability due to lengthy initialization, heavy computation and rapid graphical update. Service-oriented architecture (SOA) is trying to separate the initialization and computation from applications and to distribute such work to various service providers. Heavy computation such as beam tracking will be done periodically on a dedicated server and data will be available to client applications at all time. Industrial standard service architecture can help to improve the performance, reliability and maintainability of the service. Robustness will also be improved by reducing the complexity of individual client applications.

Evaluation of noise level in architecture department building in University of Sumatera Utara

Science.gov (United States)

Amran, Novrial; Damanik, Novita Hillary Christy

2018-03-01

Noise is one the comfort factors that need to be noticed, particularly in an educational environment. Hearing a high noise in a period can affect students’ learning performance. The aims of this study were to know the noise level and get an appropriate design to reduce noise in Architecture Department building in the University of Sumatera Utara, considering that architecture students often spend most of their time inside the room. The measurement was conducted in four rooms for two days each from 09:00 – 12:00 and from 13:00 – 16:00 by using Sound Level Meter that placed near the noise source of the room. The result indicated that the average of noise level exceeded the 55 dB(A) so it still needs the appropriate design to reduce the noise that occurs in the building.

ASHP national survey of pharmacy practice in hospital settings: dispensing and administration--2011.

Science.gov (United States)

Pedersen, Craig A; Schneider, Philip J; Scheckelhoff, Douglas J

2012-05-01

Results of the 2011 ASHP national survey of pharmacy practice in hospital settings that pertain to dispensing and administration are presented. A stratified random sample of pharmacy directors at 1401 general and children's medical-surgical hospitals in the United States were surveyed by mail. In this national probability sample survey, the response rate was 40.1%. Decentralization of the medication-use system continues, with 40% of hospitals using a decentralized system and 58% of hospitals planning to use a decentralized model in the future. Automated dispensing cabinets were used by 89% of hospitals, robots were used by 11%, carousels were used in 18%, and machine-readable coding was used in 34% of hospitals to verify doses before dispensing. Overall, 65% of hospitals had a United States Pharmacopeia chapter 797 compliant cleanroom for compounding sterile preparations. Medication administration records (MARs) have become increasingly computerized, with 67% of hospitals using electronic MARs. Bar-code-assisted medication administration was used in 50% of hospitals, and 68% of hospitals had smart infusion pumps. Health information is becoming more electronic, with 67% of hospitals having partially or completely implemented an electronic health record and 34% of hospitals having computerized prescriber order entry. The use of these technologies has substantially increased over the past year. The average number of full-time equivalent staff per 100 occupied beds averaged 17.5 for pharmacists and 15.0 for technicians. Directors of pharmacy reported declining vacancy rates for pharmacists. Pharmacists continue to improve medication use at the dispensing and administration steps of the medication-use system. The adoption of new technology is changing the philosophy of medication distribution, and health information is rapidly becoming electronic.

High-Level Design Space and Flexibility Exploration for Adaptive, Energy-Efficient WCDMA Channel Estimation Architectures

Directory of Open Access Journals (Sweden)

Zoltán Endre Rákossy

2012-01-01

Full Text Available Due to the fast changing wireless communication standards coupled with strict performance constraints, the demand for flexible yet high-performance architectures is increasing. To tackle the flexibility requirement, software-defined radio (SDR is emerging as an obvious solution, where the underlying hardware implementation is tuned via software layers to the varied standards depending on power-performance and quality requirements leading to adaptable, cognitive radio. In this paper, we conduct a case study for representatives of two complexity classes of WCDMA channel estimation algorithms and explore the effect of flexibility on energy efficiency using different implementation options. Furthermore, we propose new design guidelines for both highly specialized architectures and highly flexible architectures using high-level synthesis, to enable the required performance and flexibility to support multiple applications. Our experiments with various design points show that the resulting architectures meet the performance constraints of WCDMA and a wide range of options are offered for tuning such architectures depending on power/performance/area constraints of SDR.

Alternatives generation and analysis report for immobilized low-level waste interim storage architecture

Energy Technology Data Exchange (ETDEWEB)

Burbank, D.A., Westinghouse Hanford

1996-09-01

The Immobilized Low-Level Waste Interim Storage subproject will provide storage capacity for immobilized low-level waste product sold to the U.S. Department of Energy by the privatization contractor. This report describes alternative Immobilized Low-Level Waste storage system architectures, evaluation criteria, and evaluation results to support the Immobilized Low-Level Waste storage system architecture selection decision process.

Will there be a pharmacy leadership crises? An ASHP Foundation Scholar-in-residence report.

Science.gov (United States)

White, Sara J

2005-04-15

Health-system pharmacy directors, managers, practitioners, students, and employers were surveyed to assess the situation of current and future leaders in pharmacy and generate recommendations for preventing shortages. Online surveys were sent to pharmacy directors, pharmacy middle managers, current pharmacy practitioners pharmacy students, and employers recruiting for management positions using ASHP's membership and CareerPharm databases. Directors, managers, and practitioners were asked about their job satisfaction and future plans. The trends in demographics and attitudes toward the balance between family and work were assessed among directors, managers, practitioners, and students. Employers were asked about their perceived ease of filling managerial positions. While most pharmacy directors and middle managers were satisfied with their current positions, 80% of directors and 77% of middle managers anticipated leaving their jobs in the next decade. Men comprised 72% of directors, 50% of middle managers, 62% of practitioners, and 21% of pharmacy students. The majority of pharmacy students and practitioners reported being married to a working spouse and having children and expressed a desire to balance their personal life with their career. The top reasons cited by students and practitioners for not seeking leadership positions were having to give up clinical practice and competing responsibilities. More than half of employers felt it was more difficult to recruit managers now than it was three years ago. A significant gap in pharmacy leadership in the next 5-10 years is expected, as well as a shift in work force composition and attitude. Mentoring and residencies are important methods of fostering new leaders in the profession.

Two College of Architecture and Urban Studies faculty members named most admired educators of 2008

OpenAIRE

Chadwick, Heather Riley

2008-01-01

Two School of Architecture + Design faculty, in Virginia Tech's College of Architecture and Urban Studies, have been named by the Design and Futures Council and the journal DesignIntelligence as two of 28 educators most admired and respected in the fields of interior design, interior architecture, architecture, design, architectural engineering, industrial design, and landscape architecture.

Disruptive Logic Architectures and Technologies From Device to System Level

CERN Document Server

Gaillardon, Pierre-Emmanuel; Clermidy, Fabien

2012-01-01

This book discusses the opportunities offered by disruptive technologies to overcome the economical and physical limits currently faced by the electronics industry. It provides a new methodology for the fast evaluation of an emerging technology from an architectural perspective and discusses the implications from simple circuits to complex architectures. Several technologies are discussed, ranging from 3-D integration of devices (Phase Change Memories, Monolithic 3-D, Vertical NanoWires-based transistors) to dense 2-D arrangements (Double-Gate Carbon Nanotubes, Sublithographic Nanowires, Lithographic Crossbar arrangements). Novel architectural organizations, as well as the associated tools, are presented in order to explore this freshly opened design space. Describes a novel architectural organization for future reconfigurable systems; Includes a complete benchmarking toolflow for emerging technologies; Generalizes the description of reconfigurable circuits in terms of hierarchical levels; Assesses disruptive...

Scheduling Two-Sided Transformations Using Tile Algorithms on Multicore Architectures

Directory of Open Access Journals (Sweden)

Hatem Ltaief

2010-01-01

Full Text Available The objective of this paper is to describe, in the context of multicore architectures, three different scheduler implementations for the two-sided linear algebra transformations, in particular the Hessenberg and Bidiagonal reductions which are the first steps for the standard eigenvalue problems and the singular value decompositions respectively. State-of-the-art dense linear algebra softwares, such as the LAPACK and ScaLAPACK libraries, suffer performance losses on multicore processors due to their inability to fully exploit thread-level parallelism. At the same time the fine-grain dataflow model gains popularity as a paradigm for programming multicore architectures. Buttari et al. (Parellel Comput. Syst. Appl. 35 (2009, 38–53 introduced the concept of tile algorithms in which parallelism is no longer hidden inside Basic Linear Algebra Subprograms but is brought to the fore to yield much better performance. Along with efficient scheduling mechanisms for data-driven execution, these tile two-sided reductions achieve high performance computing by reaching up to 75% of the DGEMM peak on a 12000×12000 matrix with 16 Intel Tigerton 2.4 GHz processors. The main drawback of the tile algorithms approach for two-sided transformations is that the full reduction cannot be obtained in one stage. Other methods have to be considered to further reduce the band matrices to the required forms.

ASHP national survey of pharmacy practice in hospital settings: Dispensing and administration--2014.

Science.gov (United States)

Pedersen, Craig A; Schneider, Philip J; Scheckelhoff, Douglas J

2015-07-01

The results of the 2014 ASHP national survey of pharmacy practice in hospital settings that pertain to dispensing and administration are described. A stratified random sample of pharmacy directors at 1435 general and children's medical-surgical hospitals in the United States were surveyed by mail. In this national probability sample survey, the response rate was 29.7%. Ninety-seven percent of hospitals used automated dispensing cabinets in their medication distribution systems, 65.7% of which used individually secured lidded pockets as the predominant configuration. Overall, 44.8% of hospitals used some form of machine-readable coding to verify doses before dispensing in the pharmacy. Overall, 65% of hospital pharmacy departments reported having a cleanroom compliant with United States Pharmacopeia chapter 797. Pharmacists reviewed and approved all medication orders before the first dose was administered, either onsite or by remote order view, except in procedure areas and emergency situations, in 81.2% of hospitals. Adoption rates of electronic health information have rapidly increased, with the widespread use of electronic health records, computer prescriber order entry, barcodes, and smart pumps. Overall, 31.4% of hospitals had pharmacists practicing in ambulatory or primary care clinics. Transitions-of-care services offered by the pharmacy department have generally increased since 2012. Discharge prescription services increased from 11.8% of hospitals in 2012 to 21.5% in 2014. Approximately 15% of hospitals outsourced pharmacy management operations to a contract pharmacy services provider, an increase from 8% in 2011. Health-system pharmacists continue to have a positive impact on improving healthcare through programs that improve the efficiency, safety, and clinical outcomes of medication use in health systems. Copyright © 2015 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

An experimental investigation on reverse-cycle defrosting performance for an air source heat pump using an electronic expansion valve

International Nuclear Information System (INIS)

Qu, Minglu; Xia, Liang; Deng, Shiming; Jiang, Yiqiang

2012-01-01

Highlights: ► We experimentally studied the defrost performance under two EEV control strategies. ► The two EEV control strategies were fully open and controlled by a DS controller. ► When the EEV was under the DS controller, higher defrosting efficiency was obtained. -- Abstract: When an air source heat pump (ASHP) operates in heating mode, frost can be accumulated on the surface of its finned outdoor coil. Frosting deteriorates the operation and energy efficiency of the ASHP and periodic defrosting becomes necessary. Currently the most widely used standard defrosting method for ASHPs is reverse cycle defrost. On the other hand, electronic expansion valves (EEVs) are commonly used in heat pump/refrigeration systems, including ASHP units, as throttle regulators of refrigerant flow. This paper reports on an experimental investigation of the performance of a reverse cycle defrost operation for a 6.5 kW experimental heating capacity residential ASHP whose outdoor coil had four-parallel refrigerant circuits, and with an EEV as the refrigerant flow throttle regulator. The detailed descriptions of the experimental ASHP unit and the experimental procedures of ASHP are firstly presented. This is followed by reporting the comparative experiments of two control strategies for the EEV to investigate their effects on defrosting performance: the EEV being fully open and the EEV being regulated by a degree of refrigerant superheat (DS) controller. Experimental results revealed that when the EEV was regulated by the DS controller during defrosting, a higher defrosting efficiency and less heat wastage would be resulted in.

A State-Based Modeling Approach for Efficient Performance Evaluation of Embedded System Architectures at Transaction Level

Directory of Open Access Journals (Sweden)

Anthony Barreteau

2012-01-01

Full Text Available Abstract models are necessary to assist system architects in the evaluation process of hardware/software architectures and to cope with the still increasing complexity of embedded systems. Efficient methods are required to create reliable models of system architectures and to allow early performance evaluation and fast exploration of the design space. In this paper, we present a specific transaction level modeling approach for performance evaluation of hardware/software architectures. This approach relies on a generic execution model that exhibits light modeling effort. Created models are used to evaluate by simulation expected processing and memory resources according to various architectures. The proposed execution model relies on a specific computation method defined to improve the simulation speed of transaction level models. The benefits of the proposed approach are highlighted through two case studies. The first case study is a didactic example illustrating the modeling approach. In this example, a simulation speed-up by a factor of 7,62 is achieved by using the proposed computation method. The second case study concerns the analysis of a communication receiver supporting part of the physical layer of the LTE protocol. In this case study, architecture exploration is led in order to improve the allocation of processing functions.

A meta-level architecture for strategic reasoning in naval planning (Extended abstract)

NARCIS (Netherlands)

Hoogendoorn, M.; Jonker, C.M.; van Maanen, P.P.; Treur, J.

2005-01-01

The management of naval organizations aims at the maximization of mission success by means of monitoring, planning, and strategic reasoning. This paper presents a meta-level architecture for strategic reasoning in naval planning. The architecture is instantiated with decision knowledge acquired from

Biology and Architecture: Two Buildings Inspired by the Anatomy of the Visual System.

Science.gov (United States)

Maro Kiris, Irem

2018-05-04

Architectural production has been influenced by a variety of sources. Forms derived from nature, biology and live organisms, had often been utilised in art and architecture. Certain features of the human anatomy had been reflected in design process in various ways, as imitations, abstractions, interpretations of the reality. The correlation of ideal proportions had been investigated throughout centuries. Scholars, art historians starting with Vitruvius from the world of ancient Roman architecture, described the human figure as being the principal source of proportion among the classical orders of architecture. This study aims to investigate two contemporary buildings, namely Kiasma Museum in Helsinki and Eye Museum in Amsterdam, inspired directly from the anatomy of visual system. Morover the author discussed the relationship of biology and architecture through these two special buildings by viewing the eye and chiasma as metaphors for elements of architecture.

A High-Level Functional Architecture for GNSS-Based Road Charging Systems

DEFF Research Database (Denmark)

Zabic, Martina

2011-01-01

, a short introduction is provided followed by a presentation of the system engineering methodology to illustrate how and why system architectures can be beneficial for GNSS-based road charging systems. Hereafter, a basic set of system functions is determined based on functional system requirements, which...... charging systems, it is important to highlight the overall system architecture which is the framework that defines the basic functions and important concepts of the system. This paper presents a functional architecture for GNSS-based road charging systems based on the concepts of system engineering. First...... defines the necessary tasks that these systems must accomplish. Finally, this paper defines the system functionalities; and provides a generic high-level functional architecture for GNSS-based road charging systems....

Implementing Non Power-of-Two FFTs on Coarse-Grain Reconfigurable Architectures

NARCIS (Netherlands)

Rivaton, Arnaud; Quevremont, Jérôme; Zhang, Q.; Wolkotte, P.T.; Smit, Gerardus Johannes Maria; Nurmi, J.; Takala, J.; Hamalainen, T.D.

2005-01-01

To improve power figures of a dual ARM9 RISC core architecture targeting low-power digital broadcasting applications, the addition of a coarse-grain architecture is considered. This paper introduces two of these structures: PACT's XPP technology and the Montium, developed by the University of

Contemporary moment of residential architecture at the global level: HOUSING 15

Directory of Open Access Journals (Sweden)

Petrović Vladana

2017-01-01

Full Text Available 'That architectonic exhibitions are an indispensable and significant part of the history of architecture has been proven by numerous exhibitions dating back from the first decades of the 20th century, the Paris exhibitions (Salon d'Automne, where three manifest exhibition designs by Le Corbusier were presented, promoting a new system of values of the forthcoming modernist movement, then the Berlin exhibitions in the second half of the 20th century (Interbau 1957, IBA 1987 where the Postmodern was promoted, up to the second decade of the 21st century and the Biennial in Venice (La Biennale di Venezia, 2014, whose uniting topic was One Hundred Years of ,Modernity' (prof arch Darko Marušić, quote from the catalogue of the HOUSING 15. HOUSING 15 is an exhibition that was created on the initiative of the Department of Residential Building, Faculty of Civil Engineering and Architecture, University of Nis, in order to present the modern housing architecture at the global level. The exhibition was shown at the BINA 2016 and was followed by a round table discussion upon the topic Contemporary moment of residential architecture at the global level. The idea of the round table was to compare domestic and international experience in this field and draw attention toward the attitude on the present, electronic time considering the development of the residential architecture. The specificity of this exhibition, compared to the other events of a similar nature, is that in addition to architectural design the scientific expert reviews for the selected works are also presented, given by the international scientific and artistic committee of the exhibition. The paper is the summary of the discussion held at the round table, and it presents the potential problems, answers and conclusions relating to residential architecture today from the professional perspective.

Selecting HVAC Systems to Achieve Comfortable and Cost-effective Residential Net-Zero Energy Buildings.

Science.gov (United States)

Wu, Wei; Skye, Harrison M; Domanski, Piotr A

2018-02-15

HVAC is responsible for the largest share of energy use in residential buildings and plays an important role in broader implementation of net-zero energy building (NZEB). This study investigated the energy, comfort and economic performance of commercially-available HVAC technologies for a residential NZEB. An experimentally-validated model was used to evaluate ventilation, dehumidification, and heat pump options for the NZEB in the mixed-humid climate zone. Ventilation options were compared to mechanical ventilation without recovery; a heat recovery ventilator (HRV) and energy recovery ventilator (ERV) respectively reduced the HVAC energy by 13.5 % and 17.4 % and reduced the building energy by 7.5 % and 9.7 %. There was no significant difference in thermal comfort between the ventilation options. Dehumidification options were compared to an air-source heat pump (ASHP) with a separate dehumidifier; the ASHP with dedicated dehumidification reduced the HVAC energy by 7.3 % and the building energy by 3.9 %. The ASHP-only option (without dedicated dehumidification) reduced the initial investment but provided the worst comfort due to high humidity levels. Finally, ground-source heat pump (GSHP) alternatives were compared to the ASHP; the GSHP with two and three boreholes reduced the HVAC energy by 26.0 % and 29.2 % and the building energy by 13.1 % and 14.7 %. The economics of each HVAC configuration was analyzed using installation cost data and two electricity price structures. The GSHPs with the ERV and dedicated dehumidification provided the highest energy savings and good comfort, but were the most expensive. The ASHP with dedicated dehumidification and the ERV (or HRV) provided reasonable payback periods.

Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay.

Science.gov (United States)

Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

2013-01-01

This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs.

Human Value And Soft Skill In Diploma Level Architectural Education

Directory of Open Access Journals (Sweden)

Dr. Sarita Dash

2017-09-01

Full Text Available In todays economic scenario the rising incomes and expectations in the wake of rapid urbanization has created a crying need for creation of value concept in the appropriate climate which will encourage emergence of good human-beings a band of worthy as well as socially responsible professionals and will eventually lead to the creation of a good society. So this paper has been designed to look at the present status of Architectural Education at Diploma level in a dynamic society. To meet the demands of the changing needs of the changing society the future architectural education should address some pertinent issues regarding soft skills which has been discussed in this paper. A little measure has been taken to explain that the innovations and practices in architectural education will impose new demands on the teachers who are mainly responsible for the rectification of the foundation at root level to cultivate the human values as a part of their teachings. The paper has also talked about the outcome of evaluation that necessitates the change in education to express the qualitative significance to human consciousness.

An emergency management demonstrator using the high level architecture

International Nuclear Information System (INIS)

Williams, R.J.

1996-12-01

This paper addresses the issues of simulation interoperability within the emergency management training context. A prototype implementation in Java of a subset of the High Level Architecture (HLA) is described. The use of Web Browsers to provide graphical user interfaces to HLA is also investigated. (au)

Do Architectural Design Decisions Improve the Understanding of Software Architecture? Two Controlled Experiments

NARCIS (Netherlands)

Shahin, M.; Liang, P.; Li, Z.

2014-01-01

Architectural design decision (ADD) and its design rationale, as a paradigm shift on documenting and enriching architecture design description, is supposed to facilitate the understanding of architecture and the reasoning behind the design rationale, which consequently improves the architecting

Two-Channel Transparency-Optimized Control Architectures in Bilateral Teleoperation With Time Delay

Science.gov (United States)

Kim, Jonghyun; Chang, Pyung Hun; Park, Hyung-Soon

2013-01-01

This paper introduces transparency-optimized control architectures (TOCAs) using two communication channels. Two classes of two-channel TOCAs are found, thereby showing that two channels are sufficient to achieve transparency. These TOCAs achieve a greater level of transparency but poorer stability than three-channel TOCAs and four-channel TOCAs. Stability of the two-channel TOCAs has been enhanced while minimizing transparency degradation by adding a filter; and a combined use of the two classes of two-channel TOCAs is proposed for both free space and constrained motion, which involve switching between two TOCAs for transition between free space and constrained motions. The stability condition of the switched teleoperation system is derived for practical applications. Through the one degree-of-freedom (DOF) experiment, the proposed two-channel TOCAs were shown to operate stably, while achieving better transparency under time delay than the other TOCAs. PMID:23833548

A high-throughput two channel discrete wavelet transform architecture for the JPEG2000 standard

Science.gov (United States)

Badakhshannoory, Hossein; Hashemi, Mahmoud R.; Aminlou, Alireza; Fatemi, Omid

2005-07-01

The Discrete Wavelet Transform (DWT) is increasingly recognized in image and video compression standards, as indicated by its use in JPEG2000. The lifting scheme algorithm is an alternative DWT implementation that has a lower computational complexity and reduced resource requirement. In the JPEG2000 standard two lifting scheme based filter banks are introduced: the 5/3 and 9/7. In this paper a high throughput, two channel DWT architecture for both of the JPEG2000 DWT filters is presented. The proposed pipelined architecture has two separate input channels that process the incoming samples simultaneously with minimum memory requirement for each channel. The architecture had been implemented in VHDL and synthesized on a Xilinx Virtex2 XCV1000. The proposed architecture applies DWT on a 2K by 1K image at 33 fps with a 75 MHZ clock frequency. This performance is achieved with 70% less resources than two independent single channel modules. The high throughput and reduced resource requirement has made this architecture the proper choice for real time applications such as Digital Cinema.

A computer architecture for intelligent machines

Science.gov (United States)

Lefebvre, D. R.; Saridis, G. N.

1992-01-01

The theory of intelligent machines proposes a hierarchical organization for the functions of an autonomous robot based on the principle of increasing precision with decreasing intelligence. An analytic formulation of this theory using information-theoretic measures of uncertainty for each level of the intelligent machine has been developed. The authors present a computer architecture that implements the lower two levels of the intelligent machine. The architecture supports an event-driven programming paradigm that is independent of the underlying computer architecture and operating system. Execution-level controllers for motion and vision systems are briefly addressed, as well as the Petri net transducer software used to implement coordination-level functions. A case study illustrates how this computer architecture integrates real-time and higher-level control of manipulator and vision systems.

Comparison between two possible CMS Barrel Muon Readout Architectures

International Nuclear Information System (INIS)

Aguayo, P.; Barcala, J.M.; Molinero, A.; Pablos, J.L.; Willmott, C.; Alberdi, J.; Marin, J.; Navarrete, J.; Romero, L.

1997-01-01

A comparison between two possible readout arquitectures for the CMS muon barrel readout electronics is presented, including various aspects like costs, reliability, installation, staging and maintenance. A review of the present baseline architecture is given in the appendix. (Author)

A study of the reverse cycle defrosting performance on a multi-circuit outdoor coil unit in an air source heat pump – Part I: Experiments

International Nuclear Information System (INIS)

Qu, Minglu; Xia, Liang; Deng, Shiming; Jiang, Yiqiang

2012-01-01

Highlights: ► We experimental study the defrosting performance on a multi-circuit outdoor coil unit in an ASHP unit. ► We find that defrosting is quicker on the airside of upper circuits than that on the lower circuits. ► We discuss the effects of downwards flowing of the melted frost along the outdoor coil surface on defrosting performance. -- Abstract: When an air source heat pump (ASHP) unit operates in heating mode, frost can be accumulated on the surface of its finned outdoor coil which normally has multiple parallel circuits on its refrigerant side for minimized refrigerant pressure loss and enhanced heat transfer efficiency. On its airside, however, there is usually no segmentation corresponding to the number of refrigerant circuit. Frosting deteriorates the operation and energy efficiency of the ASHP unit and periodic defrosting becomes necessary. Currently the most widely used standard defrosting method for ASHPs is reverse cycle defrost. This paper, the first part of a two-part series, reports on the experimental part of a study of the reverse cycle defrosting performance on a multi-circuit outdoor coil unit in an experimental 6.5 kW heating capacity residential ASHP unit. Firstly the experimental ASHP unit is described and experimental procedures detailed. Secondly, the experimental results are reported. This is followed by the discussion on the effects of downwards flowing of the melted frost along a multi-circuit outdoor coil surface on defrosting performance. Finally, the evaluation of the defrosting efficiency for the experimental ASHP unit is provided. In the second part of the series, a modeling analysis on the effects of downwards flowing of the melted frost along the multi-circuit outdoor coil surface on defrosting performance of the experimental ASHP unit will be presented.

From green architecture to architectural green

DEFF Research Database (Denmark)

Earon, Ofri

2011-01-01

that describes the architectural exclusivity of this particular architecture genre. The adjective green expresses architectural qualities differentiating green architecture from none-green architecture. Currently, adding trees and vegetation to the building’s facade is the main architectural characteristics...... they have overshadowed the architectural potential of green architecture. The paper questions how a green space should perform, look like and function. Two examples are chosen to demonstrate thorough integrations between green and space. The examples are public buildings categorized as pavilions. One......The paper investigates the topic of green architecture from an architectural point of view and not an energy point of view. The purpose of the paper is to establish a debate about the architectural language and spatial characteristics of green architecture. In this light, green becomes an adjective...

Clustering Approaches for Pragmatic Two-Layer IoT Architecture

Directory of Open Access Journals (Sweden)

J. Sathish Kumar

2018-01-01

Full Text Available Connecting all devices through Internet is now practical due to Internet of Things. IoT assures numerous applications in everyday life of common people, government bodies, business, and society as a whole. Collaboration among the devices in IoT to bring various applications in the real world is a challenging task. In this context, we introduce an application-based two-layer architectural framework for IoT which consists of sensing layer and IoT layer. For any real-time application, sensing devices play an important role. Both these layers are required for accomplishing IoT-based applications. The success of any IoT-based application relies on efficient communication and utilization of the devices and data acquired by the devices at both layers. The grouping of these devices helps to achieve the same, which leads to formation of cluster of devices at various levels. The clustering helps not only in collaboration but also in prolonging overall network lifetime. In this paper, we propose two clustering algorithms based on heuristic and graph, respectively. The proposed clustering approaches are evaluated on IoT platform using standard parameters and compared with different approaches reported in literature.

INTEGRATED SURVEY FOR ARCHITECTURAL RESTORATION: A METHODOLOGICAL COMPARISON OF TWO CASE STUDIES

Directory of Open Access Journals (Sweden)

G. Bianchi

2016-06-01

Full Text Available A preliminary survey campaign is essential in projects of restoration, urban renewal, rebuilding or promotion of architectural heritage. Today several survey techniques allow full 3D object restitution and modelling that provides a richer description than simple 2D representations. However, the amount of data to collect increases dramatically and a trade-off between efficiency and productivity from one side and assuring accuracy and completeness of the results on the other must be found. Depending on the extent and the complexity of the task, a single technique or a combination of several ones might be employed. Especially when documentation at different scales and with different levels of detail are foreseen, the latter will likely be necessary. The paper describes two architectural surveys in Italy: the old village of Navelli (AQ, affected by the earthquake in 2009, and the two most relevant remains in Codiponte (MS, damaged by the earthquake in 2013, both in the context of a project of restoration and conservation. In both sites, a 3D survey was necessary to represent effectively the objects. An integrated survey campaign was performed in both cases, which consists of a GPS network as support for georeferencing, an aerial survey and a field survey made by laser scanner and close range photogrammetry. The two case studies, thanks to their peculiarities, can be taken as exemplar to wonder if the integration of different surveying techniques is today still mandatory or, considering the technical advances of each technology, it is in fact just optional.

Fuzzy logic controller architecture for water level control in nuclear power plant steam generator using ANFIS training method

International Nuclear Information System (INIS)

Vosoughi, Naser; Ekrami, AmirHasan; Naseri, Zahra

2003-01-01

Since suitable control of water level can greatly enhance the operation of a power station, a fuzzy logic controller is applied to control the steam generator water level in a pressurized water reactor. The method does not require a detailed mathematical model of the object to be controlled. It is shown that two inputs, a single output and the least number of rules (9 rules) are considered for a controller, and the ANFIS training method is employed to model functions in a controlled system. By using ANFIS training method, initial membership functions will be trained and appropriate functions are generated to control water level inside the steam generator while using the stated rules. The proposed architecture can construct an input-output mapping based on both human knowledge (in the from of fuzzy if - then rules) and stipulated input-output data. This fuzzy logic controller is applied to the steam generator level control by computer simulations. The simulation results confirm the excellent performance of this control architecture in compare with a well-turned PID controller. (author)

Advances in quantum control of three-level superconducting circuit architectures

Energy Technology Data Exchange (ETDEWEB)

Falci, G.; Paladino, E. [Dipartimento di Fisica e Astronomia, Universita di Catania (Italy); CNR-IMM UOS Universita (MATIS), Consiglio Nazionale delle Ricerche, Catania (Italy); INFN, Sezione di Catania (Italy); Di Stefano, P.G. [Dipartimento di Fisica e Astronomia, Universita di Catania (Italy); Centre for Theoretical Atomic, Molecular and Optical Physics, School of Mathematics and Physics, Queen' s University Belfast(United Kingdom); Ridolfo, A.; D' Arrigo, A. [Dipartimento di Fisica e Astronomia, Universita di Catania (Italy); Paraoanu, G.S. [Low Temperature Laboratory, Department of Applied Physics, Aalto University School of Science (Finland)

2017-06-15

Advanced control in Lambda (Λ) scheme of a solid state architecture of artificial atoms and quantized modes would allow the translation to the solid-state realm of a whole class of phenomena from quantum optics, thus exploiting new physics emerging in larger integrated quantum networks and for stronger couplings. However control solid-state devices has constraints coming from selection rules, due to symmetries which on the other hand yield protection from decoherence, and from design issues, for instance that coupling to microwave cavities is not directly switchable. We present two new schemes for the Λ-STIRAP control problem with the constraint of one or two classical driving fields being always-on. We show how these protocols are converted to apply to circuit-QED architectures. We finally illustrate an application to coherent spectroscopy of the so called ultrastrong atom-cavity coupling regime. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Component-Level Electronic-Assembly Repair (CLEAR) System Architecture

Science.gov (United States)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This document captures the system architecture for a Component-Level Electronic-Assembly Repair (CLEAR) capability needed for electronics maintenance and repair of the Constellation Program (CxP). CLEAR is intended to improve flight system supportability and reduce the mass of spares required to maintain the electronics of human rated spacecraft on long duration missions. By necessity it allows the crew to make repairs that would otherwise be performed by Earth based repair depots. Because of practical knowledge and skill limitations of small spaceflight crews they must be augmented by Earth based support crews and automated repair equipment. This system architecture covers the complete system from ground-user to flight hardware and flight crew and defines an Earth segment and a Space segment. The Earth Segment involves database management, operational planning, and remote equipment programming and validation processes. The Space Segment involves the automated diagnostic, test and repair equipment required for a complete repair process. This document defines three major subsystems including, tele-operations that links the flight hardware to ground support, highly reconfigurable diagnostics and test instruments, and a CLEAR Repair Apparatus that automates the physical repair process.

The ATLAS Level-1 Calorimeter Trigger Architecture

CERN Document Server

Garvey, J; Mahout, G; Moye, T H; Staley, R J; Watkins, P M; Watson, A T; Achenbach, R; Hanke, P; Kluge, E E; Meier, K; Meshkov, P; Nix, O; Penno, K; Schmitt, K; Ay, Cc; Bauss, B; Dahlhoff, A; Jakobs, K; Mahboubi, K; Schäfer, U; Trefzger, T M; Eisenhandler, E F; Landon, M; Moyse, E; Thomas, J; Apostoglou, P; Barnett, B M; Brawn, I P; Davis, A O; Edwards, J; Gee, C N P; Gillman, A R; Perera, V J O; Qian, W; Bohm, C; Hellman, S; Hidvégi, A; Silverstein, S; RT 2003 13th IEEE-NPSS Real Time Conference

2004-01-01

The architecture of the ATLAS Level-1 Calorimeter Trigger system (L1Calo) is presented. Common approaches have been adopted for data distribution, result merging, readout, and slow control across the three different subsystems. A significant amount of common hardware is utilized, yielding substantial savings in cost, spares, and development effort. A custom, high-density backplane has been developed with data paths suitable for both the em/tt cluster processor (CP) and jet/energy-summation processor (JEP) subsystems. Common modules also provide interfaces to VME, CANbus and the LHC Timing, Trigger and Control system (TTC). A common data merger module (CMM) uses FPGAs with multiple configurations for summing electron/photon and tau/hadron cluster multiplicities, jet multiplicities, or total and missing transverse energy. The CMM performs both crate- and system-level merging. A common, FPGA-based readout driver (ROD) is used by all of the subsystems to send input, intermediate and output data to the data acquis...

Cold Climate Heat Pumps Using Tandem Compressors

Energy Technology Data Exchange (ETDEWEB)

Shen, Bo [ORNL; Abdelaziz, Omar [ORNL; Rice, C Keith [ORNL; Baxter, Van D [ORNL

2016-01-01

In cold climate zones, e.g. ASHRAE climate regions IV and V, conventional electric air-source heat pumps (ASHP) do not work well, due to high compressor discharge temperatures, large pressure ratios and inadequate heating capacities at low ambient temperatures. Consequently, significant use of auxiliary strip heating is required to meet the building heating load. We introduce innovative ASHP technologies as part of continuing efforts to eliminate auxiliary strip heat use and maximize heating COP with acceptable cost-effectiveness and reliability. These innovative ASHP were developed using tandem compressors, which are capable of augmenting heating capacity at low temperatures and maintain superior part-load operation efficiency at moderate temperatures. Two options of tandem compressors were studied; the first employs two identical, single-speed compressors, and the second employs two identical, vapor-injection compressors. The investigations were based on system modeling and laboratory evaluation. Both designs have successfully met the performance criteria. Laboratory evaluation showed that the tandem, single-speed compressor ASHP system is able to achieve heating COP = 4.2 at 47 F (8.3 C), COP = 2.9 at 17 F (-8.3 C), and 76% rated capacity and COP = 1.9 at -13 F (-25 C). This yields a HSPF = 11.0 (per AHRI 210/240). The tandem, vapor-injection ASHP is able to reach heating COP = 4.4 at 47 F, COP = 3.1 at 17 F, and 88% rated capacity and COP = 2.0 at -13 F. This yields a HSPF = 12.0. The system modeling and further laboratory evaluation are presented in the paper.

SUSTAINABLE ARCHITECTURE : WHAT ARCHITECTURE STUDENTS THINK

OpenAIRE

SATWIKO, PRASASTO

2013-01-01

Sustainable architecture has become a hot issue lately as the impacts of climate change become more intense. Architecture educations have responded by integrating knowledge of sustainable design in their curriculum. However, in the real life, new buildings keep coming with designs that completely ignore sustainable principles. This paper discusses the results of two national competitions on sustainable architecture targeted for architecture students (conducted in 2012 and 2013). The results a...

Connecting Architecture and Implementation

Science.gov (United States)

Buchgeher, Georg; Weinreich, Rainer

Software architectures are still typically defined and described independently from implementation. To avoid architectural erosion and drift, architectural representation needs to be continuously updated and synchronized with system implementation. Existing approaches for architecture representation like informal architecture documentation, UML diagrams, and Architecture Description Languages (ADLs) provide only limited support for connecting architecture descriptions and implementations. Architecture management tools like Lattix, SonarJ, and Sotoarc and UML-tools tackle this problem by extracting architecture information directly from code. This approach works for low-level architectural abstractions like classes and interfaces in object-oriented systems but fails to support architectural abstractions not found in programming languages. In this paper we present an approach for linking and continuously synchronizing a formalized architecture representation to an implementation. The approach is a synthesis of functionality provided by code-centric architecture management and UML tools and higher-level architecture analysis approaches like ADLs.

A highly efficient 3D level-set grain growth algorithm tailored for ccNUMA architecture

Science.gov (United States)

Mießen, C.; Velinov, N.; Gottstein, G.; Barrales-Mora, L. A.

2017-12-01

A highly efficient simulation model for 2D and 3D grain growth was developed based on the level-set method. The model introduces modern computational concepts to achieve excellent performance on parallel computer architectures. Strong scalability was measured on cache-coherent non-uniform memory access (ccNUMA) architectures. To achieve this, the proposed approach considers the application of local level-set functions at the grain level. Ideal and non-ideal grain growth was simulated in 3D with the objective to study the evolution of statistical representative volume elements in polycrystals. In addition, microstructure evolution in an anisotropic magnetic material affected by an external magnetic field was simulated.

Genetic architecture of vitamin B12 and folate levels uncovered applying deeply sequenced large datasets

DEFF Research Database (Denmark)

Grarup, Niels; Sulem, Patrick; Sandholt, Camilla H

2013-01-01

of the underlying biology of human traits and diseases. Here, we used a large Icelandic whole genome sequence dataset combined with Danish exome sequence data to gain insight into the genetic architecture of serum levels of vitamin B12 (B12) and folate. Up to 22.9 million sequence variants were analyzed in combined...... in serum B12 or folate levels do not modify the risk of developing these conditions. Yet, the study demonstrates the value of combining whole genome and exome sequencing approaches to ascertain the genetic and molecular architectures underlying quantitative trait associations....

UTBB FDSOI suitability for IoT applications: Investigations at device, design and architectural levels

Science.gov (United States)

Berthier, Florent; Beigne, Edith; Heitzmann, Frédéric; Debicki, Olivier; Christmann, Jean-Frédéric; Valentian, Alexandre; Billoint, Olivier; Amat, Esteve; Morche, Dominique; Chairat, Soundous; Sentieys, Olivier

2016-11-01

In this paper, we propose to analyze Ultra Thin Body and Box FDSOI technology suitability and architectural solutions for IoT applications and more specifically for autonomous Wireless Sensor Nodes (WSNs). As IoT applications are extremely diversified there is a strong need for flexible solutions at design, architectural level but also at technological level. Moreover, as most of those systems are recovering their energy from the environment, they are challenged by low voltage supplies and low leakage functionalities. We detail in this paper some Ultra Thin Body and Box FDSOI 28 nm characteristics and results demonstrating that this technology could be a perfect option for multidisciplinary IoT devices. Back biasing capabilities and low voltage features are investigated demonstrating efficient high speed/low leakage flexibility. In addition, architectural solutions for WSNs microcontroller are also proposed taking advantage of Ultra Thin Body and Box FDSOI characteristics for full user applicative flexibility. A partitioned architecture between an Always Responsive part with an asynchronous Wake Up Controller (WUC) managing WSN current tasks and an On Demand part with a main processor for application maintenance is presented. First results of the Always Responsive part implemented in Ultra Thin Body and Box FDSOI 28 nm are also exposed.

A component architecture for the two-phase flows simulation system Neptune

Energy Technology Data Exchange (ETDEWEB)

Bechaud, C; Boucker, M; Douce, A [Electricite de France (EDF-RD/MFTT), 78 - Chatou (France); Grandotto, M [CEA Cadarache (DEN/DTP/STH), 13 - Saint-Paul-lez-Durance (France); Tajchman, M [CEA Saclay (DEN/DM2S/SFME), 91 - Gif-sur-Yvette (France)

2003-07-01

Electricite de France (EdF) and the French atomic energy commission (Cea) have planed a large project to build a new set of software in nuclear reactors analysis. One of the main idea is to allow coupled calculations in which several scientific domains are involved. This paper presents the software architecture of the two-phase flows simulation Neptune project. Neptune should allow computations of two-phase flows in 3 dimensions under normal operating conditions as well as safety conditions. Three scales are identified: the local scale where there is only homogenization between the two phases, an intermediate scale where solid internal structures are homogenized with the fluid and the system scale where some parts of the geometry under study are considered point-wise or subject to one dimensional simplifications. The main properties of this architecture are as follow: -) coupling with scientific domains, and between different scales, -) re-using of quite all or parts of existing validated codes, -) components usable by the different scales, -) easy introducing of new physical modeling as well as new numerical methods, -) local, distributed and parallel computing. The Neptune architecture is based on the component concept with stable and well suited interface. In the case of a distributed application the components are managed through a Corba bus. The building of the components is organized in shell: a programming shell (Fortran or C++ routines), a managing shell (C++ language), an interpreted shell (Python language), a Corba shell and a global driving shell (C++ or Python). Neptune will use the facilities offered by the Salome project: pre and post processors and controls. A data model has been built to have a common access to the information exchanged between the components (meshes, fields, physical and technical information). This architecture has first been setup and tested on some simple but significant cases and is now currently in use to build the Neptune

A component architecture for the two-phase flows simulation system Neptune

International Nuclear Information System (INIS)

Bechaud, C.; Boucker, M.; Douce, A.; Grandotto, M.; Tajchman, M.

2003-01-01

Electricite de France (EdF) and the French atomic energy commission (Cea) have planed a large project to build a new set of software in nuclear reactors analysis. One of the main idea is to allow coupled calculations in which several scientific domains are involved. This paper presents the software architecture of the two-phase flows simulation Neptune project. Neptune should allow computations of two-phase flows in 3 dimensions under normal operating conditions as well as safety conditions. Three scales are identified: the local scale where there is only homogenization between the two phases, an intermediate scale where solid internal structures are homogenized with the fluid and the system scale where some parts of the geometry under study are considered point-wise or subject to one dimensional simplifications. The main properties of this architecture are as follow: -) coupling with scientific domains, and between different scales, -) re-using of quite all or parts of existing validated codes, -) components usable by the different scales, -) easy introducing of new physical modeling as well as new numerical methods, -) local, distributed and parallel computing. The Neptune architecture is based on the component concept with stable and well suited interface. In the case of a distributed application the components are managed through a Corba bus. The building of the components is organized in shell: a programming shell (Fortran or C++ routines), a managing shell (C++ language), an interpreted shell (Python language), a Corba shell and a global driving shell (C++ or Python). Neptune will use the facilities offered by the Salome project: pre and post processors and controls. A data model has been built to have a common access to the information exchanged between the components (meshes, fields, physical and technical information). This architecture has first been setup and tested on some simple but significant cases and is now currently in use to build the Neptune

High-level specification of a proposed information architecture for support of a bioterrorism early-warning system.

Science.gov (United States)

Berkowitz, Murray R

2013-01-01

Current information systems for use in detecting bioterrorist attacks lack a consistent, overarching information architecture. An overview of the use of biological agents as weapons during a bioterrorist attack is presented. Proposed are the design, development, and implementation of a medical informatics system to mine pertinent databases, retrieve relevant data, invoke appropriate biostatistical and epidemiological software packages, and automatically analyze these data. The top-level information architecture is presented. Systems requirements and functional specifications for this level are presented. Finally, future studies are identified.

Minimalism in architecture: Abstract conceptualization of architecture

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2015-01-01

Full Text Available Minimalism in architecture contains the idea of the minimum as a leading creative tend to be considered and interpreted in working through phenomena of empathy and abstraction. In the Western culture, the root of this idea is found in empathy of Wilhelm Worringer and abstraction of Kasimir Malevich. In his dissertation, 'Abstraction and Empathy' Worringer presented his thesis on the psychology of style through which he explained the two opposing basic forms: abstraction and empathy. His conclusion on empathy as a psychological basis of observation expression is significant due to the verbal congruence with contemporary minimalist expression. His intuition was enhenced furthermore by figure of Malevich. Abstraction, as an expression of inner unfettered inspiration, has played a crucial role in the development of modern art and architecture of the twentieth century. Abstraction, which is one of the basic methods of learning in psychology (separating relevant from irrelevant features, Carl Jung is used to discover ideas. Minimalism in architecture emphasizes the level of abstraction to which the individual functions are reduced. Different types of abstraction are present: in the form as well as function of the basic elements: walls and windows. The case study is an example of Sou Fujimoto who is unequivocal in its commitment to the autonomy of abstract conceptualization of architecture.

FPGA-Based Channel Coding Architectures for 5G Wireless Using High-Level Synthesis

Directory of Open Access Journals (Sweden)

Swapnil Mhaske

2017-01-01

Full Text Available We propose strategies to achieve a high-throughput FPGA architecture for quasi-cyclic low-density parity-check codes based on circulant-1 identity matrix construction. By splitting the node processing operation in the min-sum approximation algorithm, we achieve pipelining in the layered decoding schedule without utilizing additional hardware resources. High-level synthesis compilation is used to design and develop the architecture on the FPGA hardware platform. To validate this architecture, an IEEE 802.11n compliant 608 Mb/s decoder is implemented on the Xilinx Kintex-7 FPGA using the LabVIEW FPGA Compiler in the LabVIEW Communication System Design Suite. Architecture scalability was leveraged to accomplish a 2.48 Gb/s decoder on a single Xilinx Kintex-7 FPGA. Further, we present rapidly prototyped experimentation of an IEEE 802.16 compliant hybrid automatic repeat request system based on the efficient decoder architecture developed. In spite of the mixed nature of data processing—digital signal processing and finite-state machines—LabVIEW FPGA Compiler significantly reduced time to explore the system parameter space and to optimize in terms of error performance and resource utilization. A 4x improvement in the system throughput, relative to a CPU-based implementation, was achieved to measure the error-rate performance of the system over large, realistic data sets using accelerated, in-hardware simulation.

Modeling Architectural Patterns’ Behavior Using Architectural Primitives

NARCIS (Netherlands)

Waqas Kamal, Ahmad; Avgeriou, Paris

2008-01-01

Architectural patterns have an impact on both the structure and the behavior of a system at the architecture design level. However, it is challenging to model patterns’ behavior in a systematic way because modeling languages do not provide the appropriate abstractions and because each pattern

Modelling of local/global architectures for second level trigger at the LHC experiment

International Nuclear Information System (INIS)

Hajduk, Z.; Iwanski, W.; Korecyl, K.; Strong, J.

1994-01-01

Different architectures of the second level triggering system for experiments on LHC have been simulated. The basic scheme was local/global system with distributed computing power. As a tool the authors have used the object-oriented MODSIM II language

Impact on energy requirements and emissions of heat pumps and micro-cogenerators participating in demand side management

International Nuclear Information System (INIS)

Cooper, Samuel J.G.; Hammond, Geoffrey P.; McManus, Marcelle C.; Rogers, John G.

2014-01-01

The potential impacts of participating in demand side management (DSM) on the performance of air source heat pumps (ASHP) and micro-combined heat and power (mCHP) units are considered by this study. As significant consumers and generators of electricity at the distribution level, large numbers of heat pumps and micro-cogenerators would provide considerable scope for participation in DSM systems. However, it is possible that operating regimes which are optimised for grid considerations will not achieve the maximum performance that is possible from the units. Modelling has been conducted to investigate the significance of this effect, considering the case where local distribution constraints are the main driver for demand side interventions. A model of domestic electrical demand has been adapted to consider a neighbourhood of 128 dwellings in order to identify when interventions are necessary. This has been combined with dynamic models of two combustion engine micro-cogenerators, a solid oxide fuel cell micro-cogenerator and two ASHPs. A simple thermal model of each building is combined with a range of user preferences in order to determine the preferred operating profiles of the heating units. The DSM scheme analysed here is likely to have minimal impact on the emissions and energy requirements associated with each heating unit. Its effect is similar to that which occurs without DSM if the control system gain is relaxed such that equivalent thermal comfort is achieved. DSM can reduce the peak electrical demand of the neighbourhood. However, in the scenarios investigated, it is unlikely that the peaks can be reduced sufficiently such that they do not exceed the capacity of the local distribution transformer if ASHPs are used in all dwellings. By using a combination of mCHP units with ASHPs, it is possible to supply heating to all dwellings without exceeding this capacity. In this case, the use of DSM can increase the ratio of ASHPs used. In the context of a low

A two-layer architecture for force-reflecting bilateral teleoperation with time delays

NARCIS (Netherlands)

Heck, D.J.F.; Saccon, A.; Nijmeijer, H.

2015-01-01

We propose a two-layer control architecture for bilateral teleoperation with communication delays. The controller is structured with an (outer) performance layer and an (inner) passivity layer. In the performance layer, any traditional controller for bilateral teleoperation can be implemented. In

Architecture Governance: The Importance of Architecture Governance for Achieving Operationally Responsive Ground Systems

Science.gov (United States)

Kolar, Mike; Estefan, Jeff; Giovannoni, Brian; Barkley, Erik

2011-01-01

Topics covered (1) Why Governance and Why Now? (2) Characteristics of Architecture Governance (3) Strategic Elements (3a) Architectural Principles (3b) Architecture Board (3c) Architecture Compliance (4) Architecture Governance Infusion Process. Governance is concerned with decision making (i.e., setting directions, establishing standards and principles, and prioritizing investments). Architecture governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level

Analysis of facility needs level in architecture studio for students’ studio grades

Science.gov (United States)

Lubis, A. S.; Hamid, B.; Pane, I. F.; Marpaung, B. O. Y.

2018-03-01

Architects must be able to play an active role and contribute to the realization of a sustainable environment. Architectural education has inherited many education research used qualitative and quantitative methods. The data were gathered by conducting (a) observation,(b) interviews, (c) documentation, (d) literature study, and (e) Questionnaire. The gathered data were analyzed qualitatively to find out what equipment needed in the learning process in the Architecture Studio, USU. Questionnaires and Ms. Excel were used for the quantitative analysis. The tabulation of quantitative data would be correlated with the students’ studio grades. The result of the research showed that equipment with the highest level of needs was (1) drawing table, (2) Special room for each student, (3) Internet Network, (4) Air Conditioning, (5) Sufficient lighting.

Instrumentation of a Level-1 Track Trigger at ATLAS with Double Buffer Front-End Architecture

CERN Document Server

Cooper, B; The ATLAS collaboration

2012-01-01

Around 2021 the Large Hadron Collider will be upgraded to provide instantaneous luminosities 5x10^34, leading to excessive rates from the ATLAS Level-1 trigger. We describe a double-buffer front-end architecture for the ATLAS tracker replacement which should enable tracking information to be used in the Level-1 decision. This will allow Level-1 rates to be controlled whilst preserving high efficiency for single lepton triggers at relatively low transverse momentum thresholds pT ~25 GeV, enabling ATLAS to remain sensitive to physics at the electroweak scale. In particular, a potential hardware solution for the communication between the upgraded silicon barrel strip detectors and the external processing within this architecture will be described, and discrete event simulations used to demonstrate that this fits within the tight latency constraints.

Architectures of electro-optical packet switched networks

DEFF Research Database (Denmark)

Berger, Michael Stubert

2004-01-01

and examines possible architectures for future high capacity networks with high capacity nodes. It is assumed that optics will play a key role in this scenario, and in this respect, the European IST research project DAVID aimed at proposing viable architectures for optical packet switching, exploiting the best...... from optics and electronics. An overview of the DAVID network architecture is given, focusing on the MAN and WAN architecture as well as the MPLS based network hierarchy. A statistical model of the optical slot generation process is presented and utilised to evaluate delay vs. efficiency. Furthermore...... architecture for a buffered crossbar switch is presented. The architecture uses two levels of backpressure (flow control) with different constraints on round trip time. No additional scheduling complexity is introduced, and for the actual example shown, a reduction in memory of 75% was obtained at the cost...

Architectural communication: Intra and extra activity of architecture

Directory of Open Access Journals (Sweden)

Stamatović-Vučković Slavica

2013-01-01

Full Text Available Apart from a brief overview of architectural communication viewed from the standpoint of theory of information and semiotics, this paper contains two forms of dualistically viewed architectural communication. The duality denotation/connotation (”primary” and ”secondary” architectural communication is one of semiotic postulates taken from Umberto Eco who viewed architectural communication as a semiotic phenomenon. In addition, architectural communication can be viewed as an intra and an extra activity of architecture where the overall activity of the edifice performed through its spatial manifestation may be understood as an act of communication. In that respect, the activity may be perceived as the ”behavior of architecture”, which corresponds to Lefebvre’s production of space.

Thermal comfort in twentieth-century architectural heritage: Two houses of Le Corbusier and André Wogenscky

Directory of Open Access Journals (Sweden)

Ignacio Requena-Ruiz

2016-06-01

This article aims to develop a balanced understanding of the approach of Modernist architecture to climate, indoor atmospheres and inhabitants׳ thermal comfort. To do so, we complement the quantitative approach of environmental assessment methods with the qualitative angle of the history of sensory and architecture. The goal is to understand the environmental performance of architecture for dealing nowadays with thermal comfort issues while respecting its cultural and historical values. Two modernist houses have been selected as case studies: the Villa Curutchet of the master Le Corbusier and the Villa Chupin of his disciple André Wogenscky. As a result, the article reveals potentialities and constraints in terms of thermal comfort when working with Modern Architecture.

Mapping robust parallel multigrid algorithms to scalable memory architectures

Science.gov (United States)

Overman, Andrea; Vanrosendale, John

1993-01-01

The convergence rate of standard multigrid algorithms degenerates on problems with stretched grids or anisotropic operators. The usual cure for this is the use of line or plane relaxation. However, multigrid algorithms based on line and plane relaxation have limited and awkward parallelism and are quite difficult to map effectively to highly parallel architectures. Newer multigrid algorithms that overcome anisotropy through the use of multiple coarse grids rather than relaxation are better suited to massively parallel architectures because they require only simple point-relaxation smoothers. In this paper, we look at the parallel implementation of a V-cycle multiple semicoarsened grid (MSG) algorithm on distributed-memory architectures such as the Intel iPSC/860 and Paragon computers. The MSG algorithms provide two levels of parallelism: parallelism within the relaxation or interpolation on each grid and across the grids on each multigrid level. Both levels of parallelism must be exploited to map these algorithms effectively to parallel architectures. This paper describes a mapping of an MSG algorithm to distributed-memory architectures that demonstrates how both levels of parallelism can be exploited. The result is a robust and effective multigrid algorithm for distributed-memory machines.

Integrating hospital information systems in healthcare institutions: a mediation architecture.

Science.gov (United States)

El Azami, Ikram; Cherkaoui Malki, Mohammed Ouçamah; Tahon, Christian

2012-10-01

Many studies have examined the integration of information systems into healthcare institutions, leading to several standards in the healthcare domain (CORBAmed: Common Object Request Broker Architecture in Medicine; HL7: Health Level Seven International; DICOM: Digital Imaging and Communications in Medicine; and IHE: Integrating the Healthcare Enterprise). Due to the existence of a wide diversity of heterogeneous systems, three essential factors are necessary to fully integrate a system: data, functions and workflow. However, most of the previous studies have dealt with only one or two of these factors and this makes the system integration unsatisfactory. In this paper, we propose a flexible, scalable architecture for Hospital Information Systems (HIS). Our main purpose is to provide a practical solution to insure HIS interoperability so that healthcare institutions can communicate without being obliged to change their local information systems and without altering the tasks of the healthcare professionals. Our architecture is a mediation architecture with 3 levels: 1) a database level, 2) a middleware level and 3) a user interface level. The mediation is based on two central components: the Mediator and the Adapter. Using the XML format allows us to establish a structured, secured exchange of healthcare data. The notion of medical ontology is introduced to solve semantic conflicts and to unify the language used for the exchange. Our mediation architecture provides an effective, promising model that promotes the integration of hospital information systems that are autonomous, heterogeneous, semantically interoperable and platform-independent.

Enterprise architecture patterns practical solutions for recurring IT-architecture problems

CERN Document Server

Perroud, Thierry

2013-01-01

Every enterprise architect faces similar problems when designing and governing the enterprise architecture of a medium to large enterprise. Design patterns are a well-established concept in software engineering, used to define universally applicable solution schemes. By applying this approach to enterprise architectures, recurring problems in the design and implementation of enterprise architectures can be solved over all layers, from the business layer to the application and data layer down to the technology layer.Inversini and Perroud describe patterns at the level of enterprise architecture

Architecture and Intelligentsia

Directory of Open Access Journals (Sweden)

Alexander Rappaport

2015-08-01

Full Text Available The article observes intellectual and cultural level of architecture and its important functions in social process. Historical analysis shows constant decline of intellectual level of profession, as a reaction on radical changes in its social functions and mass scale, leading to degrading of individual critical reflection and growing dependence of architecture to political and economical bureaucracy.

Architecture and Intelligentsia

OpenAIRE

Alexander Rappaport

2015-01-01

The article observes intellectual and cultural level of architecture and its important functions in social process. Historical analysis shows constant decline of intellectual level of profession, as a reaction on radical changes in its social functions and mass scale, leading to degrading of individual critical reflection and growing dependence of architecture to political and economical bureaucracy.

A modular microfluidic architecture for integrated biochemical analysis.

Science.gov (United States)

Shaikh, Kashan A; Ryu, Kee Suk; Goluch, Edgar D; Nam, Jwa-Min; Liu, Juewen; Thaxton, C Shad; Chiesl, Thomas N; Barron, Annelise E; Lu, Yi; Mirkin, Chad A; Liu, Chang

2005-07-12

Microfluidic laboratory-on-a-chip (LOC) systems based on a modular architecture are presented. The architecture is conceptualized on two levels: a single-chip level and a multiple-chip module (MCM) system level. At the individual chip level, a multilayer approach segregates components belonging to two fundamental categories: passive fluidic components (channels and reaction chambers) and active electromechanical control structures (sensors and actuators). This distinction is explicitly made to simplify the development process and minimize cost. Components belonging to these two categories are built separately on different physical layers and can communicate fluidically via cross-layer interconnects. The chip that hosts the electromechanical control structures is called the microfluidic breadboard (FBB). A single LOC module is constructed by attaching a chip comprised of a custom arrangement of fluid routing channels and reactors (passive chip) to the FBB. Many different LOC functions can be achieved by using different passive chips on an FBB with a standard resource configuration. Multiple modules can be interconnected to form a larger LOC system (MCM level). We demonstrated the utility of this architecture by developing systems for two separate biochemical applications: one for detection of protein markers of cancer and another for detection of metal ions. In the first case, free prostate-specific antigen was detected at 500 aM concentration by using a nanoparticle-based bio-bar-code protocol on a parallel MCM system. In the second case, we used a DNAzyme-based biosensor to identify the presence of Pb(2+) (lead) at a sensitivity of 500 nM in <1 nl of solution.

Design and Analysis of Architectures for Structural Health Monitoring Systems

Science.gov (United States)

Mukkamala, Ravi; Sixto, S. L. (Technical Monitor)

2002-01-01

During the two-year project period, we have worked on several aspects of Health Usage and Monitoring Systems for structural health monitoring. In particular, we have made contributions in the following areas. 1. Reference HUMS architecture: We developed a high-level architecture for health monitoring and usage systems (HUMS). The proposed reference architecture is shown. It is compatible with the Generic Open Architecture (GOA) proposed as a standard for avionics systems. 2. HUMS kernel: One of the critical layers of HUMS reference architecture is the HUMS kernel. We developed a detailed design of a kernel to implement the high level architecture.3. Prototype implementation of HUMS kernel: We have implemented a preliminary version of the HUMS kernel on a Unix platform.We have implemented both a centralized system version and a distributed version. 4. SCRAMNet and HUMS: SCRAMNet (Shared Common Random Access Memory Network) is a system that is found to be suitable to implement HUMS. For this reason, we have conducted a simulation study to determine its stability in handling the input data rates in HUMS. 5. Architectural specification.

Thirty-two years of landscape architectural education in Indonesia: a retrospect and prospect

Directory of Open Access Journals (Sweden)

Jusna Amin

1995-03-01

Full Text Available Study programmes in landscape architecture have existed in Indonesia since the establishment of its first educational institution in 1963. This article presents a retrospective assessment which, hopefully, will encourage all those who arc concerned with landscape architecture in Indonesia to think about its future development. For the author, the article updates a previous paper about the status of the educational practice in Indonesia, delivered as a supporting document at the 4th IFLA Eastern Regional conference in Singapore in 1981, under the theme of 'Education'. The article begins with a systematic review of landscape architecture in Indonesia, and then presents results of six interviews with individuals chosen to represent a range of views from government, private practice, and educators. From both the review and interview results, questions are considered about people's perception and appreciation of landscape architecture in Indonesia as a branch of education and professional practice. Two specific priorities are highlighted. One is the recognised need for landscape architecture to make meaningful connections between people and the places they live in. The second focuses on the relationship between landscape education and the service and industrial sectors, with regard to the availability of job opportunities for its graduates. The article includes a profile of the profession in Indonesia and asks whether the profession is able to apply environmental approaches and techniques for community involvement in the planning and design process. Ideas arc discussed regarding the improvement of the quality of university graduates to produce educated human resources who will meet the current requirements of national development and the industrial sector.

A Tale of Two Imperial Residences: Aurangzeb’s Architectural Patronage

Directory of Open Access Journals (Sweden)

Pushkar Sohoni

2016-12-01

Full Text Available While the Mughal Emperor Aurangzeb Alamgir is not well-known for his architectural commissions as his predecessors, there are still a few extant buildings associated with him. Two of these are residential sites, built almost fifty years apart, at the beginning and end of his career as an emperor. This essay examines these hitherto unpublished sites, and documents them as part of a Mughal legacy in the Deccan that has remained uncelebrated. The palace at Aurangabad and a royal residential compound just outside of Ahmadnagar are the two sites which bracket the emperor’s career and offer an insight into his political fortunes and religious life as it changed.

On the architecture for the X part of a very large FX correlator using two-accumulator CMACs

Science.gov (United States)

Lapshev, Stepan; Rezaul Hasan, S. M.

2016-02-01

This paper presents an improved input-buffer architecture for the X part of a very large FX correlator that optimizes memory use to both increase performance and reduce the overall power consumption. The architecture uses an array of two-accumulator CMACs that are reused for different pairs of correlated signals. Using two accumulators in every CMAC allows the processing array to alternately correlate two sets of signal pairs selected in such a way so that they share some or all of the processed data samples. This leads to increased processing bandwidth and a significant reduction of the memory read rate due to not having to update some or all of the processing buffers in every second processing cycle. The overall memory access rate is at most 75 % of that of the single-accumulator CMAC array. This architecture is intended for correlators of very large multi-element radio telescopes such as the Square Kilometre Array (SKA), and is suitable for an ASIC implementation.

People's Palaces : Architecture, culture and democracy in two European post-war cultural centres

NARCIS (Netherlands)

Grafe, C.

2010-01-01

This thesis is an investigation of the relationship between cultural politics and architecture in the context of the welfare state in post-war Western Europe. The book focusses on two case studies, the London South Bank and the Stockholm Kulturhus, and examines the discourses informing their

Predefined three tier business intelligence architecture in healthcare enterprise.

Science.gov (United States)

Wang, Meimei

2013-04-01

Business Intelligence (BI) has caused extensive concerns and widespread use in gathering, processing and analyzing data and providing enterprise users the methodology to make decisions. Different from traditional BI architecture, this paper proposes a new BI architecture, Top-Down Scalable BI architecture with defining mechanism for enterprise decision making solutions and aims at establishing a rapid, consistent, and scalable multiple applications on multiple platforms of BI mechanism. The two opposite information flows in our BI architecture offer the merits of having the high level of organizational prospects and making full use of the existing resources. We also introduced the avg-bed-waiting-time factor to evaluate hospital care capacity.

Preindustrial versus postindustrial Architecture and Building Techniques

DEFF Research Database (Denmark)

Vestergaard, Inge

2014-01-01

How can preindustrial architecture inspire sustainable thinking in postindustrial architectural design? How can we learn from experience and how can social, economic and environmental conditions give perspectives and guide a knowledge based evolution of basic experience towards modern industriali......How can preindustrial architecture inspire sustainable thinking in postindustrial architectural design? How can we learn from experience and how can social, economic and environmental conditions give perspectives and guide a knowledge based evolution of basic experience towards modern...... industrialized building processes? Identification of sustainable parameters related to change in society, to building technique and to comfort are illustrated through two Danish building types, which are different in time, but similar in function. One representing evolution and experience based countryside...... fisherman’s house built around year 1700; and second a frontrunner suburban family house built year 2008. The analysis involves architectural, technical and comfort matters and will state the levels of design, social conditions, sustainable and energy efficient parameters. Results will show lessons learned...

Multiprocessor architecture: Synthesis and evaluation

Science.gov (United States)

Standley, Hilda M.

1990-01-01

Multiprocessor computed architecture evaluation for structural computations is the focus of the research effort described. Results obtained are expected to lead to more efficient use of existing architectures and to suggest designs for new, application specific, architectures. The brief descriptions given outline a number of related efforts directed toward this purpose. The difficulty is analyzing an existing architecture or in designing a new computer architecture lies in the fact that the performance of a particular architecture, within the context of a given application, is determined by a number of factors. These include, but are not limited to, the efficiency of the computation algorithm, the programming language and support environment, the quality of the program written in the programming language, the multiplicity of the processing elements, the characteristics of the individual processing elements, the interconnection network connecting processors and non-local memories, and the shared memory organization covering the spectrum from no shared memory (all local memory) to one global access memory. These performance determiners may be loosely classified as being software or hardware related. This distinction is not clear or even appropriate in many cases. The effect of the choice of algorithm is ignored by assuming that the algorithm is specified as given. Effort directed toward the removal of the effect of the programming language and program resulted in the design of a high-level parallel programming language. Two characteristics of the fundamental structure of the architecture (memory organization and interconnection network) are examined.

Retreat from superficiality in architecture

Directory of Open Access Journals (Sweden)

Aleksander Serafin

2016-03-01

Full Text Available The main aim is to present academic two-level method of design, called “theoretical modeling architecture” (TMA. It means the syllabus of design teaching that is strongly supported by the theory of architecture. The elaborated method results the higher number of students’ projects, that are related to the cultural heritage.

DSP Architecture Design Essentials

CERN Document Server

Marković, Dejan

2012-01-01

In DSP Architecture Design Essentials, authors Dejan Marković and Robert W. Brodersen cover a key subject for the successful realization of DSP algorithms for communications, multimedia, and healthcare applications. The book addresses the need for DSP architecture design that maps advanced DSP algorithms to hardware in the most power- and area-efficient way. The key feature of this text is a design methodology based on a high-level design model that leads to hardware implementation with minimum power and area. The methodology includes algorithm-level considerations such as automated word-length reduction and intrinsic data properties that can be leveraged to reduce hardware complexity. From a high-level data-flow graph model, an architecture exploration methodology based on linear programming is used to create an array of architectural solutions tailored to the underlying hardware technology. The book is supplemented with online material: bibliography, design examples, CAD tutorials and custom software.

High-performance full adder architecture in quantum-dot cellular automata

Directory of Open Access Journals (Sweden)

Hamid Rashidi

2017-06-01

Full Text Available Quantum-dot cellular automata (QCA is a new and promising computation paradigm, which can be a viable replacement for the complementary metal–oxide–semiconductor technology at nano-scale level. This technology provides a possible solution for improving the computation in various computational applications. Two QCA full adder architectures are presented and evaluated: a new and efficient 1-bit QCA full adder architecture and a 4-bit QCA ripple carry adder (RCA architecture. The proposed architectures are simulated using QCADesigner tool version 2.0.1. These architectures are implemented with the coplanar crossover approach. The simulation results show that the proposed 1-bit QCA full adder and 4-bit QCA RCA architectures utilise 33 and 175 QCA cells, respectively. Our simulation results show that the proposed architectures outperform most results so far in the literature.

Cooling transfer fluids: advantages, drawbacks, refrigerant circuit architecture; Les fluides frigoporteurs: avantages, inconvenients, apercu sur l`architecture des circuits frigoporteurs

Energy Technology Data Exchange (ETDEWEB)

Duminil, M. [Association Francaise du Froid (AFF), 75 - Paris (France)

1997-12-31

The advantages and inconvenients of indirect cooling systems are summarized: simplification of the cooling distribution from a single refrigerating unit, a potential for a larger range of refrigerants, cooling circuit size diminution, but energy consumption increase, lower evaporation temperature, etc. The various types and characteristics of single- and two-phase refrigerant and heat transfer fluids are described, and more especially two-phase liquid-vapour and liquid-solid fluids. Based on the example of a two-temperature-level refrigerating system in a supermarket, the general architecture of the cold distribution circuit and the architecture of the refrigerant circuit itself, are presented with their different types, involving direct or indirect, and centralized or semi-centralized systems

Economic Model Predictive Control for Hot Water Based Heating Systems in Smart Buildings

DEFF Research Database (Denmark)

Awadelrahman, M. A. Ahmed; Zong, Yi; Li, Hongwei

2017-01-01

This paper presents a study to optimize the heating energy costs in a residential building with varying electricity price signals based on an Economic Model Predictive Controller (EMPC). The investigated heating system consists of an air source heat pump (ASHP) incorporated with a hot water tank...... as active Thermal Energy Storage (TES), where two optimization problems are integrated together to optimize both the ASHP electricity consumption and the building heating consumption utilizing a heat dynamic model of the building. The results show that the proposed EMPC can save the energy cost by load...

Two-tier architecture for unconstrained handwritten character

Indian Academy of Sciences (India)

The combined architecture performs better than the Kohonen self-organizing map alone. In the proposed approach, the collection of centroids at different phases of training plays a vital role in the performance of the recognition system. Four experiments have been conducted and experimental results show that the collection ...

Readout Architecture for Hybrid Pixel Readout Chips

CERN Document Server

AUTHOR|(SzGeCERN)694170; Westerlund, Tomi; Wyllie, Ken

The original contribution of this thesis to knowledge are novel digital readout architectures for hybrid pixel readout chips. The thesis presents asynchronous bus-based architecture, a data-node based column architecture and a network-based pixel matrix architecture for data transportation. It is shown that the data-node architecture achieves readout efficiency 99 % with half the output rate as a bus-based system. The network-based solution avoids ``broken'' columns due to some manufacturing errors, and it distributes internal data traffic more evenly across the pixel matrix than column-based architectures. An improvement of $>$ 10 % to the efficiency is achieved with uniform and non-uniform hit occupancies. Architectural design has been done using transaction level modeling ($TLM$) and sequential high-level design techniques for reducing the design and simulation time. It has been possible to simulate tens of column and full chip architectures using the high-level techniques. A decrease of $>$ 10 in run-time...

Multilevel architectures for electronic document retrieval

International Nuclear Information System (INIS)

Rome, J.A.; Tolliver, J.S.

1997-01-01

Traditionally, most classified computer systems run at the highest level of any of the data on the system, and all users must be cleared to this security level. This architecture precludes the use of low-level (pay and clearance) personnel for such tasks as data entry, and makes sharing data with other entities difficult. The government is trying to solve this problem by the introduction of multilevel-secure (MLS) computer systems. In addition, wherever possible, there is pressure to use commercial off-the-shelf software (COTS) to improve reliability, and to reduce purchase and maintenance costs. This paper presents two architectures for an MLS electronic document retrieval system using COTS products. Although the authors believe that the resulting systems represent a real advance in usability, scaleability, and scope, the disconnect between existing security rules and regulations and the rapidly-changing state of technology will make accreditation of such systems a challenge

Embedded Real-Time Architecture for Level-Set-Based Active Contours

Directory of Open Access Journals (Sweden)

Dejnožková Eva

2005-01-01

Full Text Available Methods described by partial differential equations have gained a considerable interest because of undoubtful advantages such as an easy mathematical description of the underlying physics phenomena, subpixel precision, isotropy, or direct extension to higher dimensions. Though their implementation within the level set framework offers other interesting advantages, their vast industrial deployment on embedded systems is slowed down by their considerable computational effort. This paper exploits the high parallelization potential of the operators from the level set framework and proposes a scalable, asynchronous, multiprocessor platform suitable for system-on-chip solutions. We concentrate on obtaining real-time execution capabilities. The performance is evaluated on a continuous watershed and an object-tracking application based on a simple gradient-based attraction force driving the active countour. The proposed architecture can be realized on commercially available FPGAs. It is built around general-purpose processor cores, and can run code developed with usual tools.

Architecture of a Level 1 Track Trigger for the CMS Experiment

CERN Document Server

Heintz, Ulrich

2010-01-01

The luminosity goal for the Super-LHC is 1035/cm2/s. At this luminosity the number of proton-proton interactions in each beam crossing will be in the hundreds. This will stress many components of the CMS detector. One system that has to be upgraded is the trigger system. To keep the rate at which the level 1 trigger fires manageable, information from the tracker has to be integrated into the level 1 trigger. Current design proposals foresee tracking detectors that perform on-detector filtering to reject hits from low-momentum particles. In order to build a trigger system, the filtered hit data from different layers and sectors of the tracker will have to be transmitted off the detector and brought together in a logic processor that generates trigger tracks within the time window allowed by the level 1 trigger latency. I will describe a possible architecture for the off-detector logic that accomplishes this goal.

The architecture of the CMS Level-1 Trigger Control and Monitoring System using UML

International Nuclear Information System (INIS)

Magrans de Abril, Marc; Ghabrous Larrea, Carlos; Lazaridis, Christos; Da Rocha Melo, Jose L; Hammer, Josef; Hartl, Christian

2011-01-01

The architecture of the Compact Muon Solenoid (CMS) Level-1 Trigger Control and Monitoring software system is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. The architecture of this system is described using the industry-standard Universal Modeling Language (UML). This way the relationships between the different subcomponents of the system become clear and all software upgrades and modifications are simplified. The described architecture has allowed for frequent upgrades that were necessary during the commissioning phase of CMS when the trigger system evolved constantly. As a secondary objective, the paper provides a UML usage example and tries to encourage the standardization of the software documentation of large projects across the LHC and High Energy Physics community.

The architecture of the CMS Level-1 Trigger Control and Monitoring System using UML

Science.gov (United States)

Magrans de Abril, Marc; Da Rocha Melo, Jose L.; Ghabrous Larrea, Carlos; Hammer, Josef; Hartl, Christian; Lazaridis, Christos

2011-12-01

The architecture of the Compact Muon Solenoid (CMS) Level-1 Trigger Control and Monitoring software system is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. The architecture of this system is described using the industry-standard Universal Modeling Language (UML). This way the relationships between the different subcomponents of the system become clear and all software upgrades and modifications are simplified. The described architecture has allowed for frequent upgrades that were necessary during the commissioning phase of CMS when the trigger system evolved constantly. As a secondary objective, the paper provides a UML usage example and tries to encourage the standardization of the software documentation of large projects across the LHC and High Energy Physics community.

Is the materialization of architecture necessarily material?

Directory of Open Access Journals (Sweden)

Čarapić Ana

2008-01-01

Full Text Available Architectural dematerialization process has started in the first half of the previous century, and has intensively developed at the beginning of this one. Architectural form decomposition on homo­geneous envelope and dependent internal structure, affect on façade materials to liberate from the ballast of supported role, and to gain the privilege to be the main holder of symbolic and sensual dimension. Therefore, on semantic level, they became primary driving force of dematerialization of form, and architecture in the whole. With new technological development, continuity in 'relieving' of matter has been brought to the extreme. Striving for complete liberty of conventional firmness and stability (in functional and phenomenal mode architecture take over the efemer 'week' substances from nature: water, air light, sound, and turn them in it's proper frame. Therefore, the general thesis of this paper is the absurd of architectural materialization with it's on demateriality. Being brought to the turning point, this absurd transforms both architecture (as artificial matter as well as nature itself. The goal of this paper is to predicate principles of material, formal and architectural genesis, in relation to the theoretical sources, as well as by examples of two developed constructions (pavilion 'Blur building' by Diller & Skofidio, and 'Tower of sound' by Toyo Ito.

RATS: Reactive Architectures

National Research Council Canada - National Science Library

Christensen, Marc

2004-01-01

This project had two goals: To build an emulation prototype board for a tiled architecture and to demonstrate the utility of a global inter-chip free-space photonic interconnection fabric for polymorphous computer architectures (PCA...

Architectural Engineers

DEFF Research Database (Denmark)

Petersen, Rikke Premer

engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

Architectural education and its role in teaching of art education in the second level of elementary schools

OpenAIRE

PRAŽANOVÁ, Markéta

2011-01-01

The goal of the work was effort to find reasons why to include the education in the field of architecture and environmental culture in teaching systems, mainly in the second level of elementary schools. I tried to apply these reasons into the topics of architecture training in the lessons of art education. The research among nearly 250 pupils of the 8.and 9.class of the elementary schools in big and small towns and last but not least also the discussion with the teachers of art education at e...

The column architecture -- A novel architecture for event driven 2D pixel imagers

International Nuclear Information System (INIS)

Millaud, J.; Nygren, D.

1996-01-01

The authors describe an electronic architecture for two-dimensional pixel arrays that permits very large increases in rate capability for event- or data-driven applications relative to conventional x-y architectures. The column architecture also permits more efficient use of silicon area in applications requiring local buffering, frameless data acquisition, and it avoids entirely the problem of ambiguities that may arise in conventional approaches. Two examples of active implementation are described: high energy physics and protein crystallography

Randomized pilot trial of a cognitive-behavioral alcohol, self-harm, and HIV prevention program for teens in mental health treatment.

Science.gov (United States)

Esposito-Smythers, Christianne; Hadley, Wendy; Curby, Timothy W; Brown, Larry K

2017-02-01

Adolescents with mental health conditions represent a high-risk group for substance use, deliberate self-harm (DSH), and risky sexual behavior. Mental health treatment does not uniformly decrease these risks. Effective prevention efforts are needed to offset the developmental trajectory from mental health problems to these behaviors. This study tested an adjunctive cognitive-behavioral family-based alcohol, DSH, and HIV prevention program (ASH-P) for adolescents in mental healthcare. A two group randomized design was used to compare ASH-P to an assessment only control (AO-C). Participants included 81 adolescents and a parent. Assessments were completed at pre-intervention as well as 1, 6, and 12-months post-enrollment, and included measures of family-based mechanisms and high-risk behaviors. ASH-P relative to AO-C was associated with greater improvements in most family process variables (perceptions of communication and parental disapproval of alcohol use and sexual behavior) as well as less DSH and greater refusal of sex to avoid a sexually transmitted infection. It also had a moderate (but non-significant) effect on odds of binge drinking. No differences were found in suicidal ideation, alcohol use, or sexual intercourse. ASH-P showed initial promise in preventing multiple high-risk behaviors. Further testing of prevention protocols that target multiple high-risk behaviors in clinical samples is warranted. Copyright © 2016 Elsevier Ltd. All rights reserved.

Space Architecture: The Role, Work and Aptitude

Science.gov (United States)

Griffin, Brand

2014-01-01

Space architecture has been an emerging discipline for at least 40 years. Has it arrived? Is space architecture a legitimate vocation or an avocation? If it leads to a job, what do employers want? In 2002, NASA Headquarters created a management position for a space architect whose job was to "lead the development of strategic architectures and identify high level requirements for systems that will accomplish the Nation's space exploration vision." This is a good job description with responsibility at the right level in NASA, but unfortunately, the office was discontinued two years later. Even though there is no accredited academic program or professional licensing for space architecture, there is a community of practitioners. They are civil servants, contractors and academicians supporting International Space Station and space exploration programs. In various ways, space architects currently contribute to human spaceflight, but there is a way for the discipline to be more effective in developing solutions to large scale complex problems. This paper organizes contributions from engineers, architects and psychologists into recommendations on the role of space architects in the organization, the process of creating and selecting options, and intrinsic personality traits including why they must have a high tolerance for ambiguity.

Practical, redundant, failure-tolerant, self-reconfiguring embedded system architecture

Science.gov (United States)

Klarer, Paul R.; Hayward, David R.; Amai, Wendy A.

2006-10-03

This invention relates to system architectures, specifically failure-tolerant and self-reconfiguring embedded system architectures. The invention provides both a method and architecture for redundancy. There can be redundancy in both software and hardware for multiple levels of redundancy. The invention provides a self-reconfiguring architecture for activating redundant modules whenever other modules fail. The architecture comprises: a communication backbone connected to two or more processors and software modules running on each of the processors. Each software module runs on one processor and resides on one or more of the other processors to be available as a backup module in the event of failure. Each module and backup module reports its status over the communication backbone. If a primary module does not report, its backup module takes over its function. If the primary module becomes available again, the backup module returns to its backup status.

Software Architecture Reconstruction Method, a Survey

OpenAIRE

Zainab Nayyar; Nazish Rafique

2014-01-01

Architecture reconstruction belongs to a reverse engineering process, in which we move from code to architecture level for reconstructing architecture. Software architectures are the blue prints of projects which depict the external overview of the software system. Mostly maintenance and testing cause the software to deviate from its original architecture, because sometimes for enhancing the functionality of a system the software deviates from its documented specifications, some new modules a...

Auxins differentially regulate root system architecture and cell cycle protein levels in maize seedlings.

Science.gov (United States)

Martínez-de la Cruz, Enrique; García-Ramírez, Elpidio; Vázquez-Ramos, Jorge M; Reyes de la Cruz, Homero; López-Bucio, José

2015-03-15

Maize (Zea mays) root system architecture has a complex organization, with adventitious and lateral roots determining its overall absorptive capacity. To generate basic information about the earlier stages of root development, we compared the post-embryonic growth of maize seedlings germinated in water-embedded cotton beds with that of plants obtained from embryonic axes cultivated in liquid medium. In addition, the effect of four different auxins, namely indole-3-acetic acid (IAA), 1-naphthaleneacetic acid (NAA), indole-3-butyric acid (IBA) and 2,4-dichlorophenoxyacetic acid (2,4-D) on root architecture and levels of the heat shock protein HSP101 and the cell cycle proteins CKS1, CYCA1 and CDKA1 were analyzed. Our data show that during the first days after germination, maize seedlings develop several root types with a simultaneous and/or continuous growth. The post-embryonic root development started with the formation of the primary root (PR) and seminal scutellar roots (SSR) and then continued with the formation of adventitious crown roots (CR), brace roots (BR) and lateral roots (LR). Auxins affected root architecture in a dose-response fashion; whereas NAA and IBA mostly stimulated crown root formation, 2,4-D showed a strong repressing effect on growth. The levels of HSP101, CKS1, CYCA1 and CDKA in root and leaf tissues were differentially affected by auxins and interestingly, HSP101 registered an auxin-inducible and root specific expression pattern. Taken together, our results show the timing of early branching patterns of maize and indicate that auxins regulate root development likely through modulation of the HSP101 and cell cycle proteins. Copyright © 2014 Elsevier GmbH. All rights reserved.

MT-ADRES: Multithreading on Coarse-Grained Reconfigurable Architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2007-01-01

The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (Architecture for Dynamically Reconfigurable Embedded Systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl’s law, this paper proposes to extend ADRES to MT-ADRES (Multi-Threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned in multiple...

Neural codes of seeing architectural styles.

Science.gov (United States)

Choo, Heeyoung; Nasar, Jack L; Nikrahei, Bardia; Walther, Dirk B

2017-01-10

Images of iconic buildings, such as the CN Tower, instantly transport us to specific places, such as Toronto. Despite the substantial impact of architectural design on people's visual experience of built environments, we know little about its neural representation in the human brain. In the present study, we have found patterns of neural activity associated with specific architectural styles in several high-level visual brain regions, but not in primary visual cortex (V1). This finding suggests that the neural correlates of the visual perception of architectural styles stem from style-specific complex visual structure beyond the simple features computed in V1. Surprisingly, the network of brain regions representing architectural styles included the fusiform face area (FFA) in addition to several scene-selective regions. Hierarchical clustering of error patterns further revealed that the FFA participated to a much larger extent in the neural encoding of architectural styles than entry-level scene categories. We conclude that the FFA is involved in fine-grained neural encoding of scenes at a subordinate-level, in our case, architectural styles of buildings. This study for the first time shows how the human visual system encodes visual aspects of architecture, one of the predominant and longest-lasting artefacts of human culture.

Theories of minimalism in architecture: Post scriptum

Directory of Open Access Journals (Sweden)

Stevanović Vladimir

2012-01-01

Full Text Available Owing to the period of intensive development in the last decade of XX century, architectural phenomenon called Minimalism in Architecture was remembered as the Style of the Nineties, which is characterized, morphologically speaking, by simplicity and formal reduction. Simultaneously with its development in practice, on a theoretical level several dominant interpretative models were able to establish themselves. The new millennium and time distance bring new problems; therefore this paper represents a discussion on specific theorization related to Minimalism in Architecture that can bear the designation of post scriptum, because their development starts after the constitutional period of architectural minimalist discourse. In XXI century theories, the problem of definition of minimalism remains important topic, approached by theorists through resolving on the axis: Modernism - Minimal Art - Postmodernism - Minimalism in Architecture. With regard to this, analyzed texts can be categorized in two groups: 1 texts of affirmative nature and historical-associative approach in which minimalism is identified with anything that is simple and reduced, in an idealizing manner, relied mostly on the existing hypotheses; 2 critically oriented texts, in which authors reconsider adequacy of the very term 'minimalism' in the context of architecture and take a metacritical attitude towards previous texts.

Modelization of three-dimensional bone micro-architecture using Markov random fields with a multi-level clique system

International Nuclear Information System (INIS)

Lamotte, T.; Dinten, J.M.; Peyrin, F.

2004-01-01

Imaging trabecular bone micro-architecture in vivo non-invasively is still a challenging issue due to the complexity and small size of the structure. Thus, having a realistic 3D model of bone micro-architecture could be useful in image segmentation or image reconstruction. The goal of this work was to develop a 3D model of trabecular bone micro-architecture which can be seen as a problem of texture synthesis. We investigated a statistical model based on 3D Markov Random Fields (MRF's). Due to the Hammersley-Clifford theorem MRF's may equivalently be defined by an energy function on some set of cliques. In order to model 3D binary bone texture images (bone / background), we first used a particular well-known subclass of MRFs: the Ising model. The local energy function at some voxel depends on the closest neighbors of the voxels and on some parameters which control the shape and the proportion of bone. However, simulations yielded textures organized as connected clusters which even when varying the parameters did not approach the complexity of bone micro-architecture. Then, we introduced a second level of cliques taking into account neighbors located at some distance d from the site s and a new set of cliques allowing to control the plate thickness and spacing. The 3D bone texture images generated using the proposed model were analyzed using the usual bone-architecture quantification tools in order to relate the parameters of the MRF model to the characteristic parameters of bone micro-architecture (trabecular spacing, trabecular thickness, number of trabeculae...). (authors)

Adaptive Architectural Envelope

DEFF Research Database (Denmark)

Foged, Isak Worre; Kirkegaard, Poul Henning

2010-01-01

. The general scopes of this paper are to develop a new adaptive kinetic architectural structure, particularly a reconfigurable architectural structure which can transform body shape from planar geometries to hyper-surfaces using different control strategies, i.e. a transformation into more than one or two...

Aquaponic Growbed Water Level Control Using Fog Architecture

Science.gov (United States)

Asmi Romli, Muhamad; Daud, Shuhaizar; Raof, Rafikha Aliana A.; Awang Ahmad, Zahari; Mahrom, Norfadilla

2018-05-01

Integrated Multi-Trophic Aquaculture (IMTA) is an advance method of aquaculture which combines species with different nutritional needs to live together. The combination between aquatic live and crops is called aquaponics. Aquatic waste that normally removed by biofilters in normal aquaculture practice will be absorbed by crops in this practice. Aquaponics have few common components and growbed provide the best filtration function. In growbed a siphon act as mechanical structure to control water fill and flush process. Water to the growbed comes from fish tank with multiple flow speeds based on the pump specification and height. Too low speed and too fast flow rate can result in siphon malfunctionality. Pumps with variable speed do exist but it is costly. Majority of the aquaponic practitioner use single speed pump and try to match the pump speed with siphon operational requirement. In order to remove the matching requirement some control need to be introduced. Preliminarily this research will show the concept of fill-and-flush for multiple pumping speeds. The final aim of this paper is to show how water level management can be done to remove the speed dependency. The siphon tried to be controlled remotely since wireless data transmission quite practical in vast operational area. Fog architecture will be used in order to transmit sensor data and control command. This paper able to show the water able to be retented in the growbed within suggested duration by stopping the flow in once predefined level.

Power-efficient computer architectures recent advances

CERN Document Server

Själander, Magnus; Kaxiras, Stefanos

2014-01-01

As Moore's Law and Dennard scaling trends have slowed, the challenges of building high-performance computer architectures while maintaining acceptable power efficiency levels have heightened. Over the past ten years, architecture techniques for power efficiency have shifted from primarily focusing on module-level efficiencies, toward more holistic design styles based on parallelism and heterogeneity. This work highlights and synthesizes recent techniques and trends in power-efficient computer architecture.Table of Contents: Introduction / Voltage and Frequency Management / Heterogeneity and Sp

Tobacco and alcohol sales in community pharmacies: policy statements from U.S. professional pharmacy associations.

Science.gov (United States)

Corelli, Robin L; Chai, Tiffany; Karic, Alda; Fairman, Melinda; Baez, Karina; Hudmon, Karen Suchanek

2014-01-01

To characterize the extent to which state and national professional pharmacy associations have implemented formal policies addressing the sale of tobacco and alcohol products in community pharmacies. To determine existence of tobacco and alcohol policies, national professional pharmacy associations (n = 10) and state-level pharmacy associations (n = 86) affiliated with the American Pharmacists Association (APhA) and/or the American Society of Health-System Pharmacists (ASHP) were contacted via telephone and/or e-mail, and a search of the association websites was conducted. Of 95 responding associations (99%), 14% have a formal policy opposing the sale of tobacco products in pharmacies and 5% have a formal policy opposing the sale of alcohol in pharmacies. Of the associations representing major tobacco-producing states, 40% have a formal policy against tobacco sales in pharmacies, significantly more than the 8% of non-tobacco state associations with such policies. Among national professional pharmacy associations, only APhA and ASHP have formal policy statements opposing the sale of both tobacco and alcohol in pharmacies. Most state-level professional pharmacy associations affiliated with these two national organizations have no formal policy statement or position.

The Ragnarok Architectural Software Configuration Management Model

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

1999-01-01

The architecture is the fundamental framework for designing and implementing large scale software, and the ability to trace and control its evolution is essential. However, many traditional software configuration management tools view 'software' merely as a set of files, not as an architecture....... This introduces an unfortunate impedance mismatch between the design domain (architecture level) and configuration management domain (file level.) This paper presents a software configuration management model that allows tight version control and configuration management of the architecture of a software system...

Supramolecular nano-architectures and two-dimensional/three-dimensional aggregation of a bolaamphiphilic diacid at the air/water interface

International Nuclear Information System (INIS)

Jiao Tifeng; Liu Minghua

2005-01-01

The spreading behavior and nano-architectures of a bolaamphiphilic diacid, 1, 13-tridecandicarboxylic acid (TDA) on water surface and the subphase containing Eu(III) ion were investigated. It was found that although TDA itself could not spread on water surface, it could form an ultrathin film on the aqueous subphase containing Eu(III) ion. In addition, interesting nano-architectures were observed for the transferred film on mica surface. It was found that the formation and change of the nano-architectures were depended on the surface pressure and concentration of Eu(III) ion in the subphase. A rectangular slide morphology was observed for the film spread on an aqueous subphase containing lower concentration of Eu(III), while a walnut-like nano-architectures were observed for the film spread on a higher concentration of Eu(III) ion. Flower structure was observed at a higher surface pressure. The nano-architecture can be further regulated through mixing TDA with octadecylamine (OA) in which linear fiber nanostructure was obtained. It was revealed that while the nano-architectures were formed mainly through a three dimensional aggregation in the case of TDA/Eu(III) films, a two-dimensional aggregation occurred when TDA was mixed with OA. A series of methods such as atomic force microscope, field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction were used to characterize the supramolecular structures. A possible mechanism for the formation of these nano-architectures was discussed

A NEW OS ARCHITECTURE FOR IOT

Directory of Open Access Journals (Sweden)

Jean Y. Astier

2018-03-01

Full Text Available Current computer operating systems architectures are not well suited for the coming world of connected objects, known as the Internet of Things (IoT for multiple reasons: poor communication performances in both point-to-point and broadcast cases, poor operational reliability and network security, excessive requirements both in terms of processor power and memory size leading to excessive electrical power consumption. We introduce a new computer operating system architecture well adapted to IoT, from the most modest to the most complex, and more generally able to significantly raise the input/output capacities of any communicating computer. This architecture rests on the principles of the Von Neumann hardware model, and is composed of two types of asymmetric distributed containers, which communicate by message passing. We describe the sub-systems of both of these types of containers, where each sub-system has its own scheduler, and a dedicated execution level.

Development of the Lymphoma Enterprise Architecture Database: a caBIG Silver level compliant system.

Science.gov (United States)

Huang, Taoying; Shenoy, Pareen J; Sinha, Rajni; Graiser, Michael; Bumpers, Kevin W; Flowers, Christopher R

2009-04-03

Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid (caBIG) Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system (LEAD), which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK) provided by National Cancer Institute's Center for Bioinformatics to establish the LEAD platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG to the management of clinical and biological data.

Modern architecture in a life cycle perspective

DEFF Research Database (Denmark)

Vestergaard, Inge

2017-01-01

By confronting the mistakes from the Modern Movement, the ideas of modernistic architecture are under pressure. This paper will summarize the primary architectural mistakes of the mono-functional thinking in planning and building and the non-appropriate environmental dispositions of the big plans...... architectural transformations on city level and on housing level. The transformation goals are to secure the economy and the social and the environmental aspects in the transformation´s life-cycle perspective in order to make the buildings and the districts interact with and adapt to society. The conclusion...... points out the architectural consequences of prioritizing in the transformation process the social parameters higher than the original rigid architectural theories....

Centralized and Modular Architectures for Photovoltaic Panels with Improved Efficiency: Preprint

Energy Technology Data Exchange (ETDEWEB)

Dhakal, B.; Mancilla-David, F.; Muljadi, E.

2012-07-01

The most common type of photovoltaic installation in residential applications is the centralized architecture, but the performance of a centralized architecture is adversely affected when it is subject to partial shading effects due to clouds or surrounding obstacles, such as trees. An alternative modular approach can be implemented using several power converters with partial throughput power processing capability. This paper presents a detailed study of these two architectures for the same throughput power level and compares the overall efficiencies using a set of rapidly changing real solar irradiance data collected by the Solar Radiation Research Laboratory at the National Renewable Energy Laboratory.

An ODMG-compatible testbed architecture for scalable management and analysis of physics data

International Nuclear Information System (INIS)

Malon, D.M.; May, E.N.

1997-01-01

This paper describes a testbed architecture for the investigation and development of scalable approaches to the management and analysis of massive amounts of high energy physics data. The architecture has two components: an interface layer that is compliant with a substantial subset of the ODMG-93 Version 1.2 specification, and a lightweight object persistence manager that provides flexible storage and retrieval services on a variety of single- and multi-level storage architectures, and on a range of parallel and distributed computing platforms

MT-ADRES: multi-threading on coarse-grained reconfigurable architecture

DEFF Research Database (Denmark)

Wu, Kehuai; Kanstein, Andreas; Madsen, Jan

2008-01-01

The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high-ILP archi......The coarse-grained reconfigurable architecture ADRES (architecture for dynamically reconfigurable embedded systems) and its compiler offer high instruction-level parallelism (ILP) to applications by means of a sparsely interconnected array of functional units and register files. As high......-ILP architectures achieve only low parallelism when executing partially sequential code segments, which is also known as Amdahl's law, this article proposes to extend ADRES to MT-ADRES (multi-threaded ADRES) to also exploit thread-level parallelism. On MT-ADRES architectures, the array can be partitioned...

Information management architecture for an integrated computing environment for the Environmental Restoration Program. Environmental Restoration Program, Volume 3, Interim technical architecture

International Nuclear Information System (INIS)

1994-09-01

This third volume of the Information Management Architecture for an Integrated Computing Environment for the Environmental Restoration Program--the Interim Technical Architecture (TA) (referred to throughout the remainder of this document as the ER TA)--represents a key milestone in establishing a coordinated information management environment in which information initiatives can be pursued with the confidence that redundancy and inconsistencies will be held to a minimum. This architecture is intended to be used as a reference by anyone whose responsibilities include the acquisition or development of information technology for use by the ER Program. The interim ER TA provides technical guidance at three levels. At the highest level, the technical architecture provides an overall computing philosophy or direction. At this level, the guidance does not address specific technologies or products but addresses more general concepts, such as the use of open systems, modular architectures, graphical user interfaces, and architecture-based development. At the next level, the technical architecture provides specific information technology recommendations regarding a wide variety of specific technologies. These technologies include computing hardware, operating systems, communications software, database management software, application development software, and personal productivity software, among others. These recommendations range from the adoption of specific industry or Martin Marietta Energy Systems, Inc. (Energy Systems) standards to the specification of individual products. At the third level, the architecture provides guidance regarding implementation strategies for the recommended technologies that can be applied to individual projects and to the ER Program as a whole

Architecture on Architecture

DEFF Research Database (Denmark)

Olesen, Karen

2016-01-01

that is not scientific or academic but is more like a latent body of data that we find embedded in existing works of architecture. This information, it is argued, is not limited by the historical context of the work. It can be thought of as a virtual capacity – a reservoir of spatial configurations that can...... correlation between the study of existing architectures and the training of competences to design for present-day realities.......This paper will discuss the challenges faced by architectural education today. It takes as its starting point the double commitment of any school of architecture: on the one hand the task of preserving the particular knowledge that belongs to the discipline of architecture, and on the other hand...

A Comparison of Bus Architectures for Safety-Critical Embedded Systems

Science.gov (United States)

Rushby, John; Miner, Paul S. (Technical Monitor)

2003-01-01

We describe and compare the architectures of four fault-tolerant, safety-critical buses with a view to deducing principles common to all of them, the main differences in their design choices, and the tradeoffs made. Two of the buses come from an avionics heritage, and two from automobiles, though all four strive for similar levels of reliability and assurance. The avionics buses considered are the Honeywell SAFEbus (the backplane data bus used in the Boeing 777 Airplane Information Management System) and the NASA SPIDER (an architecture being developed as a demonstrator for certification under the new DO-254 guidelines); the automobile buses considered are the TTTech Time-Triggered Architecture (TTA), recently adopted by Audi for automobile applications, and by Honeywell for avionics and aircraft control functions, and FlexRay, which is being developed by a consortium of BMW, DaimlerChrysler, Motorola, and Philips.

MC 68020 μp architecture

International Nuclear Information System (INIS)

Casals, O.; Dejuan, E.; Labarta, J.

1988-01-01

The MC68020 is a 32-bit microprocessor object code compatible with the earlier MC68000 and MC68010. In this paper we describe its architecture and two coprocessors: the MC68851 paged memory management unit and the MC68882 floating point coprocessor. Between its most important characteristics we can point up: addressing mode extensions for enhanced support of high level languages, an on-chip instruction cache and full support of virtual memory. (Author)

One or two things about architecture: Restoration works at Trajan׳s Market

Directory of Open Access Journals (Sweden)

Riccardo d׳Aquino

2015-06-01

Full Text Available One of the objectives of the redevelopment project for Trajan׳s Market, which spanned from 2000 to 2002, was to rearrange the market׳s accessibility and the visiting paths that connect and cross the entire site. The purpose was to extensively expose its beauty and thus invite more tourists into the area. The project design consisted of a series of catwalks placed at different levels and was conceived with respect to three criteria: (1 the didactic significance of forms and materials; (2 the coherence between architectural forms, techniques, and materials with the identity of the place; and (3 the possibility of removing, if necessary, newly added elements without damaging the relics. The project also involved the rearrangement and reconstruction of the former “Giardino delle Milizie” (2002–2007 to allow public access to the archaeological stratification and to the ancient Roman street located at its bottom. Consequently, the vaults of the convent were suspended upon a system of steel beams, which, together with several wooden pillars, also support the glass roof of the space, offering a close view of the ancient Roman walls. The structure and architectural forms coincide, implying that each of these elements is necessary and genuine.

Generic robot architecture

Science.gov (United States)

Bruemmer, David J [Idaho Falls, ID; Few, Douglas A [Idaho Falls, ID

2010-09-21

The present invention provides methods, computer readable media, and apparatuses for a generic robot architecture providing a framework that is easily portable to a variety of robot platforms and is configured to provide hardware abstractions, abstractions for generic robot attributes, environment abstractions, and robot behaviors. The generic robot architecture includes a hardware abstraction level and a robot abstraction level. The hardware abstraction level is configured for developing hardware abstractions that define, monitor, and control hardware modules available on a robot platform. The robot abstraction level is configured for defining robot attributes and provides a software framework for building robot behaviors from the robot attributes. Each of the robot attributes includes hardware information from at least one hardware abstraction. In addition, each robot attribute is configured to substantially isolate the robot behaviors from the at least one hardware abstraction.

Knowledge and Architectural Practice

DEFF Research Database (Denmark)

Verbeke, Johan

2017-01-01

of the level of research methods and will explain that the research methods and processes in creative practice research are very similar to grounded theory which is an established research method in the social sciences. Finally, an argument will be made for a more explicit research attitude in architectural......This paper focuses on the specific knowledge residing in architectural practice. It is based on the research of 35 PhD fellows in the ADAPT-r (Architecture, Design and Art Practice Training-research) project. The ADAPT-r project innovates architectural research in combining expertise from academia...... and from practice in order to highlight and extract the specific kind of knowledge which resides and is developed in architectural practice (creative practice research). The paper will discuss three ongoing and completed PhD projects and focusses on the outcomes and their contribution to the field...

Genetic architecture of resistance in Daphnia hosts against two species of host-specific parasites.

Science.gov (United States)

Routtu, J; Ebert, D

2015-02-01

Understanding the genetic architecture of host resistance is key for understanding the evolution of host-parasite interactions. Evolutionary models often assume simple genetics based on few loci and strong epistasis. It is unknown, however, whether these assumptions apply to natural populations. Using a quantitative trait loci (QTL) approach, we explore the genetic architecture of resistance in the crustacean Daphnia magna to two of its natural parasites: the horizontally transmitted bacterium Pasteuria ramosa and the horizontally and vertically transmitted microsporidium Hamiltosporidium tvaerminnensis. These two systems have become models for studies on the evolution of host-parasite interactions. In the QTL panel used here, Daphnia's resistance to P. ramosa is controlled by a single major QTL (which explains 50% of the observed variation). Resistance to H. tvaerminnensis horizontal infections shows a signature of a quantitative trait based in multiple loci with weak epistatic interactions (together explaining 38% variation). Resistance to H. tvaerminnensis vertical infections, however, shows only one QTL (explaining 13.5% variance) that colocalizes with one of the QTLs for horizontal infections. QTLs for resistance to Pasteuria and Hamiltosporidium do not colocalize. We conclude that the genetics of resistance in D. magna are drastically different for these two parasites. Furthermore, we infer that based on these and earlier results, the mechanisms of coevolution differ strongly for the two host-parasite systems. Only the Pasteuria-Daphnia system is expected to follow the negative frequency-dependent selection (Red Queen) model. How coevolution works in the Hamiltosporidium-Daphnia system remains unclear.

Comparison of Three Smart Camera Architectures for Real-Time Machine Vision System

Directory of Open Access Journals (Sweden)

Abdul Waheed Malik

2013-12-01

Full Text Available This paper presents a machine vision system for real-time computation of distance and angle of a camera from a set of reference points located on a target board. Three different smart camera architectures were explored to compare performance parameters such as power consumption, frame speed and latency. Architecture 1 consists of hardware machine vision modules modeled at Register Transfer (RT level and a soft-core processor on a single FPGA chip. Architecture 2 is commercially available software based smart camera, Matrox Iris GT. Architecture 3 is a two-chip solution composed of hardware machine vision modules on FPGA and an external microcontroller. Results from a performance comparison show that Architecture 2 has higher latency and consumes much more power than Architecture 1 and 3. However, Architecture 2 benefits from an easy programming model. Smart camera system with FPGA and external microcontroller has lower latency and consumes less power as compared to single FPGA chip having hardware modules and soft-core processor.

Integrated Nationwide Electronic Health Records system: Semi-distributed architecture approach.

Science.gov (United States)

Fragidis, Leonidas L; Chatzoglou, Prodromos D; Aggelidis, Vassilios P

2016-11-14

The integration of heterogeneous electronic health records systems by building an interoperable nationwide electronic health record system provides undisputable benefits in health care, like superior health information quality, medical errors prevention and cost saving. This paper proposes a semi-distributed system architecture approach for an integrated national electronic health record system incorporating the advantages of the two dominant approaches, the centralized architecture and the distributed architecture. The high level design of the main elements for the proposed architecture is provided along with diagrams of execution and operation and data synchronization architecture for the proposed solution. The proposed approach effectively handles issues related to redundancy, consistency, security, privacy, availability, load balancing, maintainability, complexity and interoperability of citizen's health data. The proposed semi-distributed architecture offers a robust interoperability framework without healthcare providers to change their local EHR systems. It is a pragmatic approach taking into account the characteristics of the Greek national healthcare system along with the national public administration data communication network infrastructure, for achieving EHR integration with acceptable implementation cost.

The Architecture of the CMS Level-1 Trigger Control and Monitoring System

CERN Document Server

Magrans de Abril, Marc; Hammer, Josef; Hartl, Christian; Xie, Zhen

2011-01-01

The architecture of the Level-1 Trigger Control and Monitoring system for the CMS experiment is presented. This system has been installed and commissioned on the trigger online computers and is currently used for data taking at the LHC. This is a medium-size distributed system that runs over 40 PCs and 200 processes that control about 4000 electronic boards. It has been designed to handle the trigger configuration and monitoring during data taking as well as all communications with the main run control of CMS. Furthermore its design has foreseen the provision of the software infrastructure for detailed testing of the trigger system during beam down time.

A differentiation of the notion of resistance, based on two ways of operationalizing textiles in architecture

DEFF Research Database (Denmark)

Mody, Astrid; Heimdal, Elisabeth

2013-01-01

An emerging field of design research deals with the operationalization of materials. In this paper, we present and analyse two approaches to operationalizing textiles in architecture. In our analysis, we focus on how differences in operational design expose different kinds of resistance in textil...

Performances of air source heat pump system for a kind of mal-defrost phenomenon appearing in moderate climate conditions

International Nuclear Information System (INIS)

Wang, W.; Feng, Y.C.; Zhu, J.H.; Li, L.T.; Guo, Q.C.; Lu, W.P.

2013-01-01

Highlights: ► Mal-defrost performances of ASHP in moderate environment are investigated. ► The system COP decreases to 2.3 under environment temperature of 7.9 °C. ► The decrease of the ASHP heating capacity can get to 43.4%. ► The origins of this special mal-defrost phenomenon were discussed. ► Suggestions were proposed to modify the current defrosting control strategies. - Abstract: To quantify the performance drop of the air source heat pump (ASHP) system under a special kind of mal-defrost phenomenon appearing in moderate climate conditions, a field test was conducted for 8 days at the initial stage of a heating season in Beijing, China. The mal-defrost was found with the more than 60% frosted area of the outdoor heat exchanger after the system running 5 days. During this frosting period, the system COP was significantly degraded, only 2.3 under an environment temperature of 7.9 °C. Comparing the test data before and after frosting, it was found that the mal-defrost decreased the COP up to 40.4% and the heating capacity to 43.4%. Such low energy efficiency continued quite a long time until the defrost control was started up manually by the authors. After defrosting, the COP reclaimed to the normal level of 5.0. The origins of this special mal-defrost phenomenon were discussed. And some suggestions were proposed to modify the current defrosting control strategy, which were helpful to avoid the mal-defrost problem in the current ASHP system and therefore improve the system performances

Using Software Architectures for Designing Distributed Embedded Systems

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

In this paper, we outline an on-going project of designing distributed embedded systems for closed-loop process control. The project is a joint effort between software architecture researchers and developers from two companies that produce commercial embedded process control systems. The project...... has a strong emphasis on software architectural issues and terminology in order to envision, design and analyze design alternatives. We present two results. First, we outline how focusing on software architecture, architectural issues and qualities are beneficial in designing distributed, embedded......, systems. Second, we present two different architectures for closed-loop process control and discuss benefits and reliabilities....

Insider Threat Security Reference Architecture

Science.gov (United States)

2012-04-01

this challenge. CMU/SEI-2012-TR-007 | 2 2 The Components of the ITSRA Figure 2 shows the four layers of the ITSRA. The Business Security layer......organizations improve their level of preparedness to address the insider threat. Business Security Architecture Data Security Architecture

The LHC dipole test control architecture

International Nuclear Information System (INIS)

Gorskaya, E.; Samojlov, V.; Raimondo, A.; Rijllart, A.

2003-01-01

The next large accelerator project at CERN is the Large Hadron Collider, which is foreseen to be installed in the existing LEP tunnel, and scheduled to be commissioned in 2007. For this project, 1200 15-metre long dipole magnets need to be tested at CERN in warm and cold conditions on dedicated test benches that are under development. The final LHC dipole series test set-up will consist of 12 benches organized in 6 clusters of two benches sharing the largest and most expensive devices. This sharing is made possible by a deliberate de-phasing of the tests among magnets, ensuring an optimum use of resources, such as cryogenics and power equipment, without limiting the total throughput. An offered two-level control architecture includes: 1) the Test 'Master' that drives the test for a cluster; 2) the Resource 'Manager' that allocates common devices and central resources. The implementation of this architecture is done in the LabVIEW environment

Digital design and computer architecture

CERN Document Server

Harris, David

2010-01-01

Digital Design and Computer Architecture is designed for courses that combine digital logic design with computer organization/architecture or that teach these subjects as a two-course sequence. Digital Design and Computer Architecture begins with a modern approach by rigorously covering the fundamentals of digital logic design and then introducing Hardware Description Languages (HDLs). Featuring examples of the two most widely-used HDLs, VHDL and Verilog, the first half of the text prepares the reader for what follows in the second: the design of a MIPS Processor. By the end of D

Developments in architecture for real-time data systems

International Nuclear Information System (INIS)

Heath, R.L.; Myers, W.R.

1975-01-01

Real-time data systems typically operate at two levels: a fast-response instrument-oriented level for data acquisition and control, and a slow human-oriented level for interaction and computation. Traditional minicomputer data systems support real-time applications by implementation of background/foreground software. Recent developments in computer technology including microprocessors enable the functional organization of hardware in distributed or hierarchical form to provide new system structures for real-time requirements. Examples of systems with distributed architecture will be discussed in detail

Iraqi architecture in mogul period

Directory of Open Access Journals (Sweden)

Hasan Shatha

2018-01-01

Full Text Available Iraqi architecture have many periods passed through it until now, each on from these periods have it is architectural style, also through time these styles interacted among us, to creating kind of space forming, space relationships, and architectural elements (detailed treatments, the research problem being from the multi interacted architectural styles causing some of confused of general characteristic to every style, that we could distinguish by it. Research tries to study architecture style through Mogul Conquest to Baghdad. Aim of research follow main characteristic for this architectural style in the Mogul periods on the level of form, elements, and treatments. Research depending on descriptive and analytical all buildings belong to this period, so from analyzing there style by, general form for building, architectural elements, and it architectural treatment, therefore; repeating this procedures to every building we get some similarities, from these similarities we can making conclusion about pure characteristic of the style of these period. Other side, we also discover some Dissimilar in the building periods, these will lead research to make what interacting among styles in this period, after all that we can drew clearly main characteristic of Architectural Style for Mogul Conquest in Baghdad

The architecture of a modern military health information system.

Science.gov (United States)

Mukherji, Raj J; Egyhazy, Csaba J

2004-06-01

This article describes a melding of a government-sponsored architecture for complex systems with open systems engineering architecture developed by the Institute for Electrical and Electronics Engineers (IEEE). Our experience in using these two architectures in building a complex healthcare system is described in this paper. The work described shows that it is possible to combine these two architectural frameworks in describing the systems, operational, and technical views of a complex automation system. The advantage in combining the two architectural frameworks lies in the simplicity of implementation and ease of understanding of automation system architectural elements by medical professionals.

Information security architecture an integrated approach to security in the organization

CERN Document Server

Killmeyer, Jan

2000-01-01

An information security architecture is made up of several components. Each component in the architecture focuses on establishing acceptable levels of control. These controls are then applied to the operating environment of an organization. Functionally, information security architecture combines technical, practical, and cost-effective solutions to provide an adequate and appropriate level of security.Information Security Architecture: An Integrated Approach to Security in the Organization details the five key components of an information security architecture. It provides C-level executives

OS Friendly Microprocessor Architecture

Science.gov (United States)

2017-04-01

NOTES Patrick La Fratta is now affiliated with Micron Technology, Inc., Boise, Idaho. 14. ABSTRACT We present an introduction to the patented ...Operating System Friendly Microprocessor Architecture (OSFA). The software framework to support the hardware-level security features is currently patent ...Army is assignee. OS Friendly Microprocessor Architecture. United States Patent 9122610. 2015 Sep. 2. Jungwirth P, inventor; US Army is assignee

Advanced control architecture for autonomous vehicles

Science.gov (United States)

Maurer, Markus; Dickmanns, Ernst D.

1997-06-01

An advanced control architecture for autonomous vehicles is presented. The hierarchical architecture consists of four levels: a vehicle level, a control level, a rule-based level and a knowledge-based level. A special focus is on forms of internal representation, which have to be chosen adequately for each level. The control scheme is applied to VaMP, a Mercedes passenger car which autonomously performs missions on German freeways. VaMP perceives the environment with its sense of vision and conventional sensors. It controls its actuators for locomotion and attention focusing. Modules for perception, cognition and action are discussed.

Competition between two wetland macrophytes under different levels of sediment saturation

Directory of Open Access Journals (Sweden)

Feng Li

2015-02-01

Full Text Available Plant-plant interactions have been widely studied under various environmental conditions. However, in wetland ecosystems how plant interactions change in response to variation in sediment saturation remains largely unclear, even though different levels of sediment saturation play important roles in determining plant growth performance in wetland ecosystems. To this end, a competition experiment with two typical wetland species, Carex brevicuspis (neighbor plant and Polygonum hydropiper (target plant, was conducted in a target-neighbor design. Two water levels (0 cm and -40 cm water levels representing waterlogged and drained sediments, respectively and three neighbor plant densities (0 plants m-2, 400 plants m-2, and 1600 plants m-2 were tested in a factorial design. Biomass accumulation of P. hydropiper decreased along with enhanced C. brevicuspis density in the waterlogged treatment. However, in the drained treatment, biomass accumulation did not change under two C. brevicuspis densities. Above-ground relative neighbor effect index (ARNE and relative neighbor effect index (RNE of C. brevicuspis on P. hydropiper increased along with enhanced C. brevicuspis density only under waterlogged conditions. The below-ground relative neighbor effect index (BRNE was not affected at the different water level and density treatments. The below-ground mass fraction of P. hydropiper was much higher in the waterlogged treatment than it was in the drained one, especially with no C. brevicuspis treatment. However, the leaf mass fraction displayed the opposite pattern. The longest root length of P. hydropiper was much shorter under waterlogged treatment than under the drained treatment. These results suggest that the competition intensity of C. brevicuspis to P. hydropiper increased along with increasing C. brevicuspis density only under waterlogged conditions. Moreover, this study also confirms that P. hydropiper can acclimate to water stress mainly through

Platform Architecture for Decentralized Positioning Systems

Directory of Open Access Journals (Sweden)

Zakaria Kasmi

2017-04-01

Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

Cross-Circulating Current Suppression Method for Parallel Three-Phase Two-Level Inverters

DEFF Research Database (Denmark)

Wei, Baoze; Guerrero, Josep M.; Guo, Xiaoqiang

2015-01-01

The parallel architecture is very popular for power inverters to increase the power level. This paper presents a method for the parallel operation of inverters in an ac-distributed system, to suppress the cross-circulating current based on virtual impedance without current-sharing bus...

Development of the Lymphoma Enterprise Architecture Database: A caBIG(TM Silver Level Compliant System

Directory of Open Access Journals (Sweden)

Taoying Huang

2009-01-01

Full Text Available Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™ Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™, which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data.

Development of the Lymphoma Enterprise Architecture Database: A caBIG(TM Silver Level Compliant System

Directory of Open Access Journals (Sweden)

Taoying Huang

2009-04-01

Full Text Available Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™ Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™, which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data.

Development of the Lymphoma Enterprise Architecture Database: A caBIG(tm) Silver level compliant System

Science.gov (United States)

Huang, Taoying; Shenoy, Pareen J.; Sinha, Rajni; Graiser, Michael; Bumpers, Kevin W.; Flowers, Christopher R.

2009-01-01

Lymphomas are the fifth most common cancer in United States with numerous histological subtypes. Integrating existing clinical information on lymphoma patients provides a platform for understanding biological variability in presentation and treatment response and aids development of novel therapies. We developed a cancer Biomedical Informatics Grid™ (caBIG™) Silver level compliant lymphoma database, called the Lymphoma Enterprise Architecture Data-system™ (LEAD™), which integrates the pathology, pharmacy, laboratory, cancer registry, clinical trials, and clinical data from institutional databases. We utilized the Cancer Common Ontological Representation Environment Software Development Kit (caCORE SDK) provided by National Cancer Institute’s Center for Bioinformatics to establish the LEAD™ platform for data management. The caCORE SDK generated system utilizes an n-tier architecture with open Application Programming Interfaces, controlled vocabularies, and registered metadata to achieve semantic integration across multiple cancer databases. We demonstrated that the data elements and structures within LEAD™ could be used to manage clinical research data from phase 1 clinical trials, cohort studies, and registry data from the Surveillance Epidemiology and End Results database. This work provides a clear example of how semantic technologies from caBIG™ can be applied to support a wide range of clinical and research tasks, and integrate data from disparate systems into a single architecture. This illustrates the central importance of caBIG™ to the management of clinical and biological data. PMID:19492074

Geometric Rationalization for Freeform Architecture

KAUST Repository

Jiang, Caigui

2016-01-01

The emergence of freeform architecture provides interesting geometric challenges with regards to the design and manufacturing of large-scale structures. To design these architectural structures, we have to consider two types of constraints. First

Elimination of two level fluctuators in superconducting quantum bits by an epitaxial tunnel barrier

International Nuclear Information System (INIS)

Oh, Seongshik; Cicak, Katarina; Kline, Jeffrey S.; Sillanpaeae, Mika A.; Osborn, Kevin D.; Whittaker, Jed D.; Simmonds, Raymond W.; Pappas, David P.

2006-01-01

Quantum computing based on Josephson junction technology is considered promising due to its scalable architecture. However, decoherence is a major obstacle. Here, we report evidence for improved Josephson quantum bits (qubits) using a single-crystal Al 2 O 3 tunnel barrier. We have found an ∼80% reduction in the density of the spectral splittings that indicate the existence of two-level fluctators (TLFs) in amorphous tunnel barriers. The residual ∼20% TLFs can be attributed to interfacial effects that may be further reduced by different electrode materials. These results show that decoherence sources in the tunnel barrier of Josephson qubits can be identified and eliminated

A supportive architecture for CFD-based design optimisation

Science.gov (United States)

Li, Ni; Su, Zeya; Bi, Zhuming; Tian, Chao; Ren, Zhiming; Gong, Guanghong

2014-03-01

Multi-disciplinary design optimisation (MDO) is one of critical methodologies to the implementation of enterprise systems (ES). MDO requiring the analysis of fluid dynamics raises a special challenge due to its extremely intensive computation. The rapid development of computational fluid dynamic (CFD) technique has caused a rise of its applications in various fields. Especially for the exterior designs of vehicles, CFD has become one of the three main design tools comparable to analytical approaches and wind tunnel experiments. CFD-based design optimisation is an effective way to achieve the desired performance under the given constraints. However, due to the complexity of CFD, integrating with CFD analysis in an intelligent optimisation algorithm is not straightforward. It is a challenge to solve a CFD-based design problem, which is usually with high dimensions, and multiple objectives and constraints. It is desirable to have an integrated architecture for CFD-based design optimisation. However, our review on existing works has found that very few researchers have studied on the assistive tools to facilitate CFD-based design optimisation. In the paper, a multi-layer architecture and a general procedure are proposed to integrate different CFD toolsets with intelligent optimisation algorithms, parallel computing technique and other techniques for efficient computation. In the proposed architecture, the integration is performed either at the code level or data level to fully utilise the capabilities of different assistive tools. Two intelligent algorithms are developed and embedded with parallel computing. These algorithms, together with the supportive architecture, lay a solid foundation for various applications of CFD-based design optimisation. To illustrate the effectiveness of the proposed architecture and algorithms, the case studies on aerodynamic shape design of a hypersonic cruising vehicle are provided, and the result has shown that the proposed architecture

Mathematical modelling of Bit-Level Architecture using Reciprocal Quantum Logic

Science.gov (United States)

Narendran, S.; Selvakumar, J.

2018-04-01

Efficiency of high-performance computing is on high demand with both speed and energy efficiency. Reciprocal Quantum Logic (RQL) is one of the technology which will produce high speed and zero static power dissipation. RQL uses AC power supply as input rather than DC input. RQL has three set of basic gates. Series of reciprocal transmission lines are placed in between each gate to avoid loss of power and to achieve high speed. Analytical model of Bit-Level Architecture are done through RQL. Major drawback of reciprocal Quantum Logic is area, because of lack in proper power supply. To achieve proper power supply we need to use splitters which will occupy large area. Distributed arithmetic uses vector- vector multiplication one is constant and other is signed variable and each word performs as a binary number, they rearranged and mixed to form distributed system. Distributed arithmetic is widely used in convolution and high performance computational devices.

Performance evaluation of canny edge detection on a tiled multicore architecture

Science.gov (United States)

Brethorst, Andrew Z.; Desai, Nehal; Enright, Douglas P.; Scrofano, Ronald

2011-01-01

In the last few years, a variety of multicore architectures have been used to parallelize image processing applications. In this paper, we focus on assessing the parallel speed-ups of different Canny edge detection parallelization strategies on the Tile64, a tiled multicore architecture developed by the Tilera Corporation. Included in these strategies are different ways Canny edge detection can be parallelized, as well as differences in data management. The two parallelization strategies examined were loop-level parallelism and domain decomposition. Loop-level parallelism is achieved through the use of OpenMP,1 and it is capable of parallelization across the range of values over which a loop iterates. Domain decomposition is the process of breaking down an image into subimages, where each subimage is processed independently, in parallel. The results of the two strategies show that for the same number of threads, programmer implemented, domain decomposition exhibits higher speed-ups than the compiler managed, loop-level parallelism implemented with OpenMP.

High-Efficient Parallel CAVLC Encoders on Heterogeneous Multicore Architectures

Directory of Open Access Journals (Sweden)

H. Y. Su

2012-04-01

Full Text Available This article presents two high-efficient parallel realizations of the context-based adaptive variable length coding (CAVLC based on heterogeneous multicore processors. By optimizing the architecture of the CAVLC encoder, three kinds of dependences are eliminated or weaken, including the context-based data dependence, the memory accessing dependence and the control dependence. The CAVLC pipeline is divided into three stages: two scans, coding, and lag packing, and be implemented on two typical heterogeneous multicore architectures. One is a block-based SIMD parallel CAVLC encoder on multicore stream processor STORM. The other is a component-oriented SIMT parallel encoder on massively parallel architecture GPU. Both of them exploited rich data-level parallelism. Experiments results show that compared with the CPU version, more than 70 times of speedup can be obtained for STORM and over 50 times for GPU. The implementation of encoder on STORM can make a real-time processing for 1080p @30fps and GPU-based version can satisfy the requirements for 720p real-time encoding. The throughput of the presented CAVLC encoders is more than 10 times higher than that of published software encoders on DSP and multicore platforms.

Dynamic Weather Routes Architecture Overview

Science.gov (United States)

Eslami, Hassan; Eshow, Michelle

2014-01-01

Dynamic Weather Routes Architecture Overview, presents the high level software architecture of DWR, based on the CTAS software framework and the Direct-To automation tool. The document also covers external and internal data flows, required dataset, changes to the Direct-To software for DWR, collection of software statistics, and the code structure.

Architectural Engineering to Super-Light Structures

DEFF Research Database (Denmark)

Castberg, Niels Andreas

The increasing global urbanisation creates a great demand for new buildings. In the aim to honour this, a new structural system, offering flexibility and variation at no extra cost appears beneficial. Super-Light Structures constitute such a system. This PhD thesis examines Super-Light Structures...... with architectural engineering as a starting point. The thesis is based on a two stringed hypothesis: Architectural engineering gives rise to better architecture and Super-Light Structures support and enables a static, challenging architecture. The aim of the thesis is to clarify architectural engineering's impact...... on the work process between architects and engineers in the design development. Using architectural engineering, Super-Light Structures are examined in an architectural context, and it is explained how digital tools can support architectural engineering and design of Super-Light Structures. The experiences...

Impact of two-stage turbocharging architectures on pumping losses of automotive engines based on an analytical model

International Nuclear Information System (INIS)

Galindo, J.; Serrano, J.R.; Climent, H.; Varnier, O.

2010-01-01

Present work presents an analytical study of two-stage turbocharging configuration performance. The aim of this work is to understand the influence of different two-stage-architecture parameters to optimize the use of exhaust manifold gases energy and to aid decision making process. An analytical model giving the relationship between global compression ratio and global expansion ratio is developed as a function of basic engine and turbocharging system parameters. Having an analytical solution, the influence of different variables, such as expansion ratio between HP and LP turbine, intercooler efficiency, turbochargers efficiency, cooling fluid temperature and exhaust temperature are studied independently. Engine simulations with proposed analytical model have been performed to analyze the influence of these different parameters on brake thermal efficiency and pumping mean effective pressure. The results obtained show the overall performance of the two-stage system for the whole operative range and characterize the optimum control of the elements for each operative condition. The model was also used to compare single-stage and two-stage architectures performance for the same engine operative conditions. Benefits and limits in terms of breathing capabilities and brake thermal efficiency of each type of system have been presented and analyzed.

Building Design Guidelines of Interior Architecture for Bio safety Levels of Biology Laboratories

International Nuclear Information System (INIS)

ElDib, A.A.

2014-01-01

This paper discusses the pivotal role of the Interior Architecture As one of the scientific disciplines minute to complete the Architectural Sciences, which relied upon the achievement and development of facilities containing scientific research laboratories, in terms of planning and design, particularly those containing biological laboratories using radioactive materials, adding to that, the application of the materials or raw materials commensurate with each discipline of laboratory and its work nature, and by the discussion the processing of design techniques and requirements of interior architecture dealing with Research Laboratory for electronic circuits an their applications with the making of its prototypes

Reframing Architecture

DEFF Research Database (Denmark)

Riis, Søren

2013-01-01

I would like to thank Prof. Stephen Read (2011) and Prof. Andrew Benjamin (2011) for both giving inspiring and elaborate comments on my article “Dwelling in-between walls: the architectural surround”. As I will try to demonstrate below, their two different responses not only supplement my article...... focuses on how the absence of an initial distinction might threaten the endeavour of my paper. In my reply to Read and Benjamin, I will discuss their suggestions and arguments, while at the same time hopefully clarifying the postphenomenological approach to architecture....

Validating Avionics Conceptual Architectures with Executable Specifications

Directory of Open Access Journals (Sweden)

Nils Fischer

2012-08-01

Full Text Available Current avionics systems specifications, developed after conceptual design, have a high degree of uncertainty. Since specifications are not sufficiently validated in the early development process and no executable specification exists at aircraft level, system designers cannot evaluate the impact of their design decisions at aircraft or aircraft application level. At the end of the development process of complex systems, e. g. aircraft, an average of about 65 per cent of all specifications have to be changed because they are incorrect, incomplete or too vaguely described. In this paper, a model-based design methodology together with a virtual test environment is described that makes complex high level system specifications executable and testable during the very early levels of system design. An aircraft communication system and its system context is developed to demonstrate the proposed early validation methodology. Executable specifications for early conceptual system architectures enable system designers to couple functions, architecture elements, resources and performance parameters, often called non-functional parameters. An integrated executable specification at Early Conceptual Architecture Level is developed and used to determine the impact of different system architecture decisions on system behavior and overall performance.

Space Elevators Preliminary Architectural View

Science.gov (United States)

Pullum, L.; Swan, P. A.

Space Systems Architecture has been expanded into a process by the US Department of Defense for their large scale systems of systems development programs. This paper uses the steps in the process to establishes a framework for Space Elevator systems to be developed and provides a methodology to manage complexity. This new approach to developing a family of systems is based upon three architectural views: Operational View OV), Systems View (SV), and Technical Standards View (TV). The top level view of the process establishes the stages for the development of the first Space Elevator and is called Architectural View - 1, Overview and Summary. This paper will show the guidelines and steps of the process while focusing upon components of the Space Elevator Preliminary Architecture View. This Preliminary Architecture View is presented as a draft starting point for the Space Elevator Project.

An agent architecture with on-line learning of both procedural and declarative knowledge

Energy Technology Data Exchange (ETDEWEB)

Sun, R.; Peterson, T.; Merrill, E. [Univ. of Alabama, Tuscaloosa, AL (United States)

1996-12-31

In order to develop versatile cognitive agents that learn in situated contexts and generalize resulting knowledge to different environments, we explore the possibility of learning both declarative and procedural knowledge in a hybrid connectionist architecture. The architecture is based on the two-level idea proposed earlier by the author. Declarative knowledge is represented symbolically, while procedural knowledge is represented subsymbolically. The architecture integrates reactive procedures, rules, learning, and decision-making in a unified framework, and structures different learning components (including Q-learning and rule induction) in a synergistic way to perform on-line and integrated learning.

VERNACULAR ARCHITECTURE: AN INTRODUCTORY COURSE TO LEARN ARCHITECTURE IN INDIA

Directory of Open Access Journals (Sweden)

Miki Desai

2010-07-01

Full Text Available “The object in view of both my predecessors in office and by myself has been rather to bring out the reasoning powers of individual students, so that they may understand the inner meaning of the old forms and their original function and may develop and modernize and gradually produce an architecture, Indian in character, but at the same time as suited to present day India as the old styles were to their own times and environment.” Claude Batley-1940; Lang, Desai, Desai, 1997 (p.143. The article introduces teaching philosophy, content and method of Basic Design I and II for first year students of architecture at the Faculty of Architecture, Centre for Environmental Planning and Technology (CEPT University, Ahmedabad, India. It is framed within the Indian perspective of architectural education from the British colonial times. Commencing with important academic literature and biases of the initial colonial period, it quickly traces architectural education in CEPT, the sixteenth school of post-independent India, set up in 1962, discussing the foundation year teaching imparted. The school was Modernist and avant-garde. The author introduced these two courses against the back drop of the Universalist Modernist credo of architecture and education. In the courses, the primary philosophy behind learning design emerges from heuristic method. The aim of the first course is seen as infusing interest in visual world, development of manual skills and dexterity through the dictum of ‘Look-feel-reason out-evaluate’ and ‘observe-record-interpret-synthesize transform express’. Due to the lack of architectural orientation in Indian schooling; the second course assumes vernacular architecture as a reasonable tool for a novice to understand the triangular relationship of society, architecture and physical context and its impact on design. The students are analytically exposed to the regional variety of architectures logically stemming from the geo

Tectonic Indexicality and Architectural Semiosis

NARCIS (Netherlands)

Lee, S.

A work of architecture occupies a delicate position between functional performance and production of certain meaning and experience. The design of architecture becomes stifling when an architects attempts to harmonize the two facets. Modernist architects argued that a building should express

An Evaluation of the High Level Architecture (HLA) as a Framework for NASA Modeling and Simulation

Science.gov (United States)

Reid, Michael R.; Powers, Edward I. (Technical Monitor)

2000-01-01

The High Level Architecture (HLA) is a current US Department of Defense and an industry (IEEE-1516) standard architecture for modeling and simulations. It provides a framework and set of functional rules and common interfaces for integrating separate and disparate simulators into a larger simulation. The goal of the HLA is to reduce software costs by facilitating the reuse of simulation components and by providing a runtime infrastructure to manage the simulations. In order to evaluate the applicability of the HLA as a technology for NASA space mission simulations, a Simulations Group at Goddard Space Flight Center (GSFC) conducted a study of the HLA and developed a simple prototype HLA-compliant space mission simulator. This paper summarizes the prototyping effort and discusses the potential usefulness of the HLA in the design and planning of future NASA space missions with a focus on risk mitigation and cost reduction.

Computer programming and architecture the VAX

CERN Document Server

Levy, Henry

2014-01-01

Takes a unique systems approach to programming and architecture of the VAXUsing the VAX as a detailed example, the first half of this book offers a complete course in assembly language programming. The second describes higher-level systems issues in computer architecture. Highlights include the VAX assembler and debugger, other modern architectures such as RISCs, multiprocessing and parallel computing, microprogramming, caches and translation buffers, and an appendix on the Berkeley UNIX assembler.

CITAstudio: Computation in Architecture 2015

DEFF Research Database (Denmark)

Nicholas, Paul; Ayres, Phil

2016-01-01

CITAstudio yearbook. CITAstudio: Computation in Architecture is a two year International Master's Programme at The Royal Danish Academy of Fine Arts, School of Architecture. With a focus on digital design and material fabrication the programme questions how computation is changing our spatial...

Space and Architecture's Current Line of Research? A Lunar Architecture Workshop With An Architectural Agenda.

Science.gov (United States)

Solomon, D.; van Dijk, A.

space context that will be useful on Earth on a conceptual and practical level? * In what ways could architecture's field of reference offer building on the Moon (and other celestial bodies) a paradigm shift? 1 In addition to their models and designs, workshop participants will begin authoring a design recommendation for the building of (infra-) structures and habitats on celestial bodies in particular the Moon and Mars. The design recommendation, a substantiated aesthetic code of conduct (not legally binding) will address long term planning and incorporate issues of sustainability, durability, bio-diversity, infrastructure, CHANGE, and techniques that lend themselves to Earth-bound applications. It will also address the cultural implications of architectural design might have within the context of space exploration. The design recommendation will ultimately be presented for peer review to both the space and architecture communities. What would the endorsement from the architectural community of such a document mean to the space community? The Lunar Architecture Workshop is conceptualised, produced and organised by(in alphabetical order): Alexander van Dijk, Art Race in Space, Barbara Imhof; ES- CAPE*spHERE, Vienna, University of Technology, Institute for Design and Building Construction, Vienna, Bernard Foing; ESA SMART1 Project Scientist, Susmita Mo- hanty; MoonFront, LLC, Hans Schartner' Vienna University of Technology, Institute for Design and Building Construction, Debra Solomon; Art Race in Space, Dutch Art Institute, Paul van Susante; Lunar Explorers Society. Workshop locations: ESTEC, Noordwijk, NL and V2_Lab, Rotterdam, NL Workshop dates: June 3-16, 2002 (a Call for Participation will be made in March -April 2002.) 2

An ontology-based approach for modelling architectural styles

OpenAIRE

Pahl, Claus; Giesecke, Simon; Hasselbring, Wilhelm

2007-01-01

peer-reviewed The conceptual modelling of software architectures is of central importance for the quality of a software system. A rich modelling language is required to integrate the different aspects of architecture modelling, such as architectural styles, structural and behavioural modelling, into a coherent framework.We propose an ontological approach for architectural style modelling based on description logic as an abstract, meta-level modelling instrument. Architect...

Architectural Design Space Exploration of an FPGA-based Compressed Sampling Engine

DEFF Research Database (Denmark)

El-Sayed, Mohammad; Koch, Peter; Le Moullec, Yannick

2015-01-01

We present the architectural design space exploration of a compressed sampling engine for use in a wireless heart-rate monitoring system. We show how parallelism affects execution time at the register transfer level. Furthermore, two example solutions (modified semi-parallel and full...

Architecture Between Mind and Empirical Experience

Directory of Open Access Journals (Sweden)

Shatha Abbas Hassan

2016-10-01

Full Text Available The research aims to identify the level of balance in the architectural thought influenced by the rational type human consciousness, the materialistic based on the Empirical type, moral based on human experience as source of knowledge. This was reflected in architecture in the specialized thought that the mind is the source of knowledge which explains the phenomena of life. The rational approach based on objectivity and methodology in (Form Production, the other approach is based on subjectivity in form production (Form Inspiration. The research problem is that there is imbalance in the relationship between the rational side and the human experience in architecture, which led into imbalance between theory and application in architecture according to architectural movements.

DReAM: Demand Response Architecture for Multi-level District Heating and Cooling Networks

Energy Technology Data Exchange (ETDEWEB)

Bhattacharya, Saptarshi; Chandan, Vikas; Arya, Vijay; Kar, Koushik

2017-05-19

In this paper, we exploit the inherent hierarchy of heat exchangers in District Heating and Cooling (DHC) networks and propose DReAM, a novel Demand Response (DR) architecture for Multi-level DHC networks. DReAM serves to economize system operation while still respecting comfort requirements of individual consumers. Contrary to many present day DR schemes that work on a consumer level granularity, DReAM works at a level of hierarchy above buildings, i.e. substations that supply heat to a group of buildings. This improves the overall DR scalability and reduce the computational complexity. In the first step of the proposed approach, mathematical models of individual substations and their downstream networks are abstracted into appropriately constructed low-complexity structural forms. In the second step, this abstracted information is employed by the utility to perform DR optimization that determines the optimal heat inflow to individual substations rather than buildings, in order to achieve the targeted objectives across the network. We validate the proposed DReAM framework through experimental results under different scenarios on a test network.

An architecture for human-network interfaces

DEFF Research Database (Denmark)

Sonnenwald, Diane H.

1990-01-01

Some of the issues (and their consequences) that arise when human-network interfaces (HNIs) are viewed from the perspective of people who use and develop them are examined. Target attributes of HNI architecture are presented. A high-level architecture model that supports the attributes is discussed...

Genetic and Molecular Mechanisms of Quantitative Trait Loci Controlling Maize Inflorescence Architecture.

Science.gov (United States)

Li, Manfei; Zhong, Wanshun; Yang, Fang; Zhang, Zuxin

2018-03-01

The establishment of inflorescence architecture is critical for the reproduction of flowering plant species. The maize plant generates two types of inflorescences, the tassel and the ear, and their architectures have a large effect on grain yield and yield-related traits that are genetically controlled by quantitative trait loci (QTLs). Since ear and tassel architecture are deeply affected by the activity of inflorescence meristems, key QTLs and genes regulating meristematic activity have important impacts on inflorescence development and show great potential for optimizing grain yield. Isolation of yield trait-related QTLs is challenging, but these QTLs have direct application in maize breeding. Additionally, characterization and functional dissection of QTLs can provide genetic and molecular knowledge of quantitative variation in inflorescence architecture. In this review, we summarize currently identified QTLs responsible for the establishment of ear and tassel architecture and discuss the potential genetic control of four ear-related and four tassel-related traits. In recent years, several inflorescence architecture-related QTLs have been characterized at the gene level. We review the mechanisms of these characterized QTLs.

A Systems Engineering Approach to Architecture Development

Science.gov (United States)

Di Pietro, David A.

2015-01-01

Architecture development is often conducted prior to system concept design when there is a need to determine the best-value mix of systems that works collectively in specific scenarios and time frames to accomplish a set of mission area objectives. While multiple architecture frameworks exist, they often require use of unique taxonomies and data structures. In contrast, this paper characterizes architecture development using terminology widely understood within the systems engineering community. Using a notional civil space architecture example, it employs a multi-tier framework to describe the enterprise level architecture and illustrates how results of lower tier, mission area architectures integrate into the enterprise architecture. It also presents practices for conducting effective mission area architecture studies, including establishing the trade space, developing functions and metrics, evaluating the ability of potential design solutions to meet the required functions, and expediting study execution through the use of iterative design cycles

Roofline model toolkit: A practical tool for architectural and program analysis

Energy Technology Data Exchange (ETDEWEB)

Lo, Yu Jung [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Van Straalen, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ligocki, Terry J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cordery, Matthew J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wright, Nicholas J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hall, Mary W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-04-18

We present preliminary results of the Roofline Toolkit for multicore, many core, and accelerated architectures. This paper focuses on the processor architecture characterization engine, a collection of portable instrumented micro benchmarks implemented with Message Passing Interface (MPI), and OpenMP used to express thread-level parallelism. These benchmarks are specialized to quantify the behavior of different architectural features. Compared to previous work on performance characterization, these microbenchmarks focus on capturing the performance of each level of the memory hierarchy, along with thread-level parallelism, instruction-level parallelism and explicit SIMD parallelism, measured in the context of the compilers and run-time environments. We also measure sustained PCIe throughput with four GPU memory managed mechanisms. By combining results from the architecture characterization with the Roofline model based solely on architectural specifications, this work offers insights for performance prediction of current and future architectures and their software systems. To that end, we instrument three applications and plot their resultant performance on the corresponding Roofline model when run on a Blue Gene/Q architecture.

ARCHITECTURE IN EFFECT: A Glance at Critical Historiography

Directory of Open Access Journals (Sweden)

Navid Gohardani

2014-03-01

Full Text Available Historiography marks a relatively unexplored research domain in architecture. Despite the obscure nature of this subject matter, architectural historiography equally illuminates a hidden pathway to the historical interaction of architecture with art or literature. Critical historiography adds another dimension to this emerging research topic that further encapsulates multiple levels of criticism. In recognition of a growing interest for historiography, it can be argued that the critical aspects of historiography may serve as crucial instruments for an enhanced understanding of architectural historiography. In this article, the realm of architectural historiography is investigated through a multidisciplinary perspective that revisits architectural criticism, critical historiography, modern architecture, phenomenology, and a number of aspects of architectural historiography in the Swedish Million Homes Program.

An Evaluation of ADLs on Modeling Patterns for Software Architecture

NARCIS (Netherlands)

Waqas Kamal, Ahmad; Avgeriou, Paris

2007-01-01

Architecture patterns provide solutions to recurring design problems at the architecture level. In order to model patterns during software architecture design, one may use a number of existing Architecture Description Languages (ADLs), including the UML, a generic language but also a de facto

Using Runtime Systems Tools to Implement Efficient Preconditioners for Heterogeneous Architectures

Directory of Open Access Journals (Sweden)

Roussel Adrien

2016-11-01

Full Text Available Solving large sparse linear systems is a time-consuming step in basin modeling or reservoir simulation. The choice of a robust preconditioner strongly impact the performance of the overall simulation. Heterogeneous architectures based on General Purpose computing on Graphic Processing Units (GPGPU or many-core architectures introduce programming challenges which can be managed in a transparent way for developer with the use of runtime systems. Nevertheless, algorithms need to be well suited for these massively parallel architectures. In this paper, we present preconditioning techniques which enable to take advantage of emerging architectures. We also present our task-based implementations through the use of the HARTS (Heterogeneous Abstract RunTime System runtime system, which aims to manage the recent architectures. We focus on two preconditoners. The first is ILU(0 preconditioner implemented on distributing memory systems. The second one is a multi-level domain decomposition method implemented on a shared-memory system. Obtained results are then presented on corresponding architectures, which open the way to discuss on the scalability of such methods according to numerical performances while keeping in mind that the next step is to propose a massively parallel implementations of these techniques.

Performances of multiprocessor multidisk architectures for continuous media storage

Science.gov (United States)

Gennart, Benoit A.; Messerli, Vincent; Hersch, Roger D.

1996-03-01

Multimedia interfaces increase the need for large image databases, capable of storing and reading streams of data with strict synchronicity and isochronicity requirements. In order to fulfill these requirements, we consider a parallel image server architecture which relies on arrays of intelligent disk nodes, each disk node being composed of one processor and one or more disks. This contribution analyzes through bottleneck performance evaluation and simulation the behavior of two multi-processor multi-disk architectures: a point-to-point architecture and a shared-bus architecture similar to current multiprocessor workstation architectures. We compare the two architectures on the basis of two multimedia algorithms: the compute-bound frame resizing by resampling and the data-bound disk-to-client stream transfer. The results suggest that the shared bus is a potential bottleneck despite its very high hardware throughput (400Mbytes/s) and that an architecture with addressable local memories located closely to their respective processors could partially remove this bottleneck. The point- to-point architecture is scalable and able to sustain high throughputs for simultaneous compute- bound and data-bound operations.

Landscape design methods in architecture

NARCIS (Netherlands)

Jauslin, D.T.

2012-01-01

Landscape has been used as a metaphor or conceptual reference for an increasing amount of excellent architectural projects in the last two decades. The phenomenon seems to be a substantial innovation of architecture with an interesting potential for artistic, social and ecological gains. To be able

Self-optimizing control of air-source heat pump with multivariable extremum seeking

International Nuclear Information System (INIS)

Dong, Liujia; Li, Yaoyu; Mu, Baojie; Xiao, Yan

2015-01-01

The air-source heat pump (ASHP) is widely adopted for cooling and heating of residential and commercial buildings. The performance of ASHP can be controlled by several operating variables, such as compressor capacity, condenser fan speed, evaporator fan speed and suction superheat. In practice, the system characteristics can be varied significantly by the variations in ambient condition, operation setpoint, internal thermal load and equipment degradation, which makes it difficult to obtain accurate plant models. As consequence, the model based control strategies for ASHP could limit the achievable energy efficiency. Model-free self-optimizing control strategies are thus more preferable. In this study, a multi-input extremum seeking control (ESC) scheme is proposed for both heating and cooling operation of ASHP. The zone temperature is assumed to be regulated by the compressor capacity, while the expansion valve opening is used to regulate the suction superheat at the given setpoint. The total power consumption of the compressor, the condenser fan and the evaporator fan is measured as input to the ESC, while the ESC controls the evaporator fan speed, the condenser fan speed and the suction superheat setpoint. The proposed scheme is evaluated with a Modelica based dynamic simulation model of ASHP under both cooling and heating modes of operation. Simulation results show the effectiveness of the proposed scheme to achieve the maximum achievable efficiency in a nearly model-free manner. - Highlights: • Multi-input ESC. • Air-source heat pump. • Cooling and heating. • Modelica based model

An Internet of Things Generic Reference Architecture

DEFF Research Database (Denmark)

Bhalerao, Dipashree M.; Riaz, Tahir; Madsen, Ole Brun

2013-01-01

Internet of things Network is a future application of Internet. This network has three major basic blocks as business process or Application, core network or internetwork and peripheral network as Things or objects. The assembly has the basic intention of connecting all physical and virtual things......, and keeping track of all these things for monitoring and controlling some information. IoT architecture is studied from software architecture, overall system architecture and network architecture point of view. Paper puts forward the requirements of software architecture along with, its component...... and deployment diagram, process and interface diagram at abstract level. Paper proposes the abstract generic IoT reference and concrete abstract generic IoT reference architectures. Network architecture is also put up as a state of the art. Paper shortly gives overviews of protocols used for IoT. Some...

Memristor-Based Synapse Design and Training Scheme for Neuromorphic Computing Architecture

Science.gov (United States)

2012-06-01

system level built upon the conventional Von Neumann computer architecture [2][3]. Developing the neuromorphic architecture at chip level by...SCHEME FOR NEUROMORPHIC COMPUTING ARCHITECTURE 5a. CONTRACT NUMBER FA8750-11-2-0046 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 62788F 6...creation of memristor-based neuromorphic computing architecture. Rather than the existing crossbar-based neuron network designs, we focus on memristor

Architectural slicing

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2013-01-01

Architectural prototyping is a widely used practice, con- cerned with taking architectural decisions through experiments with light- weight implementations. However, many architectural decisions are only taken when systems are already (partially) implemented. This is prob- lematic in the context...... of architectural prototyping since experiments with full systems are complex and expensive and thus architectural learn- ing is hindered. In this paper, we propose a novel technique for harvest- ing architectural prototypes from existing systems, \\architectural slic- ing", based on dynamic program slicing. Given...... a system and a slicing criterion, architectural slicing produces an architectural prototype that contain the elements in the architecture that are dependent on the ele- ments in the slicing criterion. Furthermore, we present an initial design and implementation of an architectural slicer for Java....

METRIC context unit architecture

Energy Technology Data Exchange (ETDEWEB)

Simpson, R.O.

1988-01-01

METRIC is an architecture for a simple but powerful Reduced Instruction Set Computer (RISC). Its speed comes from the simultaneous processing of several instruction streams, with instructions from the various streams being dispatched into METRIC's execution pipeline as they become available for execution. The pipeline is thus kept full, with a mix of instructions for several contexts in execution at the same time. True parallel programming is supported within a single execution unit, the METRIC Context Unit. METRIC's architecture provides for expansion through the addition of multiple Context Units and of specialized Functional Units. The architecture thus spans a range of size and performance from a single-chip microcomputer up through large and powerful multiprocessors. This research concentrates on the specification of the METRIC Context Unit at the architectural level. Performance tradeoffs made during METRIC's design are discussed, and projections of METRIC's performance are made based on simulation studies.

Approaching Technical Issues in Architectural Education

DEFF Research Database (Denmark)

Pugnale, Alberto; Parigi, Dario

2012-01-01

This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between conventi......This paper discusses teaching of technical subjects in architecture, presenting two experimental activities, recently organized at Aalborg University - a two week long workshop and a one day long lecture. From the pedagogical point of view, the activities are strategically placed between...

Trans-disciplinarity: The Singularities and Multiplicities of Architecture

Directory of Open Access Journals (Sweden)

Tahl Kaminer

2007-10-01

Full Text Available This inaugural issue of Footprint aims at understanding today’s architecture culture as a negotiation between two antithetical definitions of architecture’s identity. The belief in the disciplinary singularity of architectural objects, irreducible to the conditions of their production, is confronted - in discourse and design - with the perception of architecture as an interdisciplinary mediation between multiple political, economic, social, technological and cultural factors. With the concept of trans-disciplinarity, the negotiation between these two positions is investigated here as an engine of the ‘tradition of the present’ of contemporary architecture - the discourses and designs which emerged in the 1960s and defined orientation points for today’s architectural thought and practice.

Trans-disciplinarity: The Singularities and Multiplicities of Architecture

Directory of Open Access Journals (Sweden)

Lukasz Stanek

2014-07-01

Full Text Available This inaugural issue of Footprint aims at understanding today’s architecture culture as a negotiation between two antithetical definitions of architecture’s identity. The belief in the disciplinary singularity of architectural objects, irreducible to the conditions of their production, is confronted – in discourse and design – with the perception of architecture as an interdisciplinary mediation between multiple political, economic, social, technological and cultural factors. With the concept of trans-disciplinarity, the negotiation between these two positions is investigated here as an engine of the ‘tradition of the present’ of contemporary architecture – the discourses and designs which emerged in the 1960s and defined orientation points for today’s architectural thought and practice.

An ATR architecture for algorithm development and testing

Science.gov (United States)

Breivik, Gøril M.; Løkken, Kristin H.; Brattli, Alvin; Palm, Hans C.; Haavardsholm, Trym

2013-05-01

A research platform with four cameras in the infrared and visible spectral domains is under development at the Norwegian Defence Research Establishment (FFI). The platform will be mounted on a high-speed jet aircraft and will primarily be used for image acquisition and for development and test of automatic target recognition (ATR) algorithms. The sensors on board produce large amounts of data, the algorithms can be computationally intensive and the data processing is complex. This puts great demands on the system architecture; it has to run in real-time and at the same time be suitable for algorithm development. In this paper we present an architecture for ATR systems that is designed to be exible, generic and efficient. The architecture is module based so that certain parts, e.g. specific ATR algorithms, can be exchanged without affecting the rest of the system. The modules are generic and can be used in various ATR system configurations. A software framework in C++ that handles large data ows in non-linear pipelines is used for implementation. The framework exploits several levels of parallelism and lets the hardware processing capacity be fully utilised. The ATR system is under development and has reached a first level that can be used for segmentation algorithm development and testing. The implemented system consists of several modules, and although their content is still limited, the segmentation module includes two different segmentation algorithms that can be easily exchanged. We demonstrate the system by applying the two segmentation algorithms to infrared images from sea trial recordings.

A two-dimensional Zn coordination polymer with a three-dimensional supramolecular architecture

Directory of Open Access Journals (Sweden)

Fuhong Liu

2017-10-01

Full Text Available The title compound, poly[bis{μ2-4,4′-bis[(1,2,4-triazol-1-ylmethyl]biphenyl-κ2N4:N4′}bis(nitrato-κOzinc(II], [Zn(NO32(C18H16N62]n, is a two-dimensional zinc coordination polymer constructed from 4,4′-bis[(1H-1,2,4-triazol-1-ylmethyl]-1,1′-biphenyl units. It was synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. The ZnII cation is located on an inversion centre and is coordinated by two O atoms from two symmetry-related nitrate groups and four N atoms from four symmetry-related 4,4′-bis[(1H-1,2,4-triazol-1-ylmethyl]-1,1′-biphenyl ligands, forming a distorted octahedral {ZnN4O2} coordination geometry. The linear 4,4′-bis[(1H-1,2,4-triazol-1-ylmethyl]-1,1′-biphenyl ligand links two ZnII cations, generating two-dimensional layers parallel to the crystallographic (132 plane. The parallel layers are connected by C—H...O, C—H...N, C—H...π and π–π stacking interactions, resulting in a three-dimensional supramolecular architecture.

Energy Management Systems and tertiary regulation in hierarchical control architectures for islanded micro-grids

DEFF Research Database (Denmark)

Sanseverino, Eleonora Riva; Di Silvestre, Maria Luisa; Quang, Ninh Nguyen

2015-01-01

In this paper, the structure of the highest level of a hierarchical control architecture for micro-grids is proposed. Such structure includes two sub-levels: the Energy Management System, EMS, and the tertiary regulation. The first devoted to energy resources allocation in each time slot based...

The Hi-Ring architecture for datacentre networks

DEFF Research Database (Denmark)

Galili, Michael; Kamchevska, Valerija; Ding, Yunhong

2016-01-01

This paper summarizes recent work on a hierarchical ring-based network architecture (Hi-Ring) for datacentre and short-range applications. The architecture allows leveraging benefits of optical switching technologies while maintaining a high level of connection granularity. We discuss results...

Architecture of Environmental Engineering

DEFF Research Database (Denmark)

Wenzel, Henrik; Alting, Leo

2006-01-01

An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention......-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental Engineering, thus, in essence...... comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual disciplines, within each...

Architecture of Environmental Engineering

DEFF Research Database (Denmark)

Wenzel, Henrik; Alting, Leo

2004-01-01

An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention...... of Eco-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental...... Engineering, thus, in essence comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual...

Advanced Laser Architecture for Two-Step Laser Tandem Mass Spectrometer

Science.gov (United States)

Fahey, Molly E.; Li, Steven X.; Yu, Anthony W.; Getty, Stephanie A.

2016-01-01

Future astrobiology missions will focus on planets with significant astrochemical or potential astrobiological features, such as small, primitive bodies and the icy moons of the outer planets that may host diverse organic compounds. These missions require advanced instrument techniques to fully and unambiguously characterize the composition of surface and dust materials. Laser desorptionionization mass spectrometry (LDMS) is an emerging instrument technology for in situ mass analysis of non-volatile sample composition. A recent Goddard LDMS advancement is the two-step laser tandem mass spectrometer (L2MS) instrument to address the need for future flight instrumentation to deconvolve complex organic signatures. The L2MS prototype uses a resonance enhanced multi-photon laser ionization mechanism to selectively detect aromatic species from a more complex sample. By neglecting the aliphatic and inorganic mineral signatures in the two-step mass spectrum, the L2MS approach can provide both mass assignments and clues to structural information for an in situ investigation of non-volatile sample composition. In this paper we will describe our development effort on a new laser architecture that is based on the previously flown Lunar Orbiter Laser Altimeter (LOLA) laser transmitter for the L2MS instrument. The laser provides two discrete midinfrared wavelengths (2.8 m and 3.4 m) using monolithic optical parametric oscillators and ultraviolet (UV) wavelength (266 nm) on a single laser bench with a straightforward development path toward flight readiness.

Darboux transformation for two-level system

Energy Technology Data Exchange (ETDEWEB)

Bagrov, V.; Baldiotti, M.; Gitman, D.; Shamshutdinova, V. [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318-CEP, 05315-970 Sao Paulo, S.P. (Brazil)

2005-06-01

We develop the Darboux procedure for the case of the two-level system. In particular, it is demonstrated that one can construct the Darboux intertwining operator that does not violate the specific structure of the equations of the two-level system, transforming only one real potential into another real potential. We apply the obtained Darboux transformation to known exact solutions of the two-level system. Thus, we find three classes of new solutions for the two-level system and the corresponding new potentials that allow such solutions. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

Architecture

OpenAIRE

Clear, Nic

2014-01-01

When discussing science fiction’s relationship with architecture, the usual practice is to look at the architecture “in” science fiction—in particular, the architecture in SF films (see Kuhn 75-143) since the spaces of literary SF present obvious difficulties as they have to be imagined. In this essay, that relationship will be reversed: I will instead discuss science fiction “in” architecture, mapping out a number of architectural movements and projects that can be viewed explicitly as scien...

CAAD as Computer-Activated Architectural Design

DEFF Research Database (Denmark)

Galle, Per

1998-01-01

In a brief sketch, drawing on a general philosophical conception of human interaction with the world, the architectural design process is analysed in terms of two kinds of human action: interpretation and production. Both of these are seen as establishing a link between mental and material entities....... On this background two alternative roles of computers in computer-aided architectural design (CAAD) are distinguished: a passive and a more active role, where in the latter case, the computer’s capacity for symbol manipulation is utilized to influence design thinking actively. The analysis offered in this paper may...... serve at least two purposes: to provide a conceptual machinery for research and reflection on CAAD, and to clarify the notion of ‘artificial intelligence’ in the light of architectural design....

Raexplore: Enabling Rapid, Automated Architecture Exploration for Full Applications

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yao [Argonne National Lab. (ANL), Argonne, IL (United States); Balaprakash, Prasanna [Argonne National Lab. (ANL), Argonne, IL (United States); Meng, Jiayuan [Argonne National Lab. (ANL), Argonne, IL (United States); Morozov, Vitali [Argonne National Lab. (ANL), Argonne, IL (United States); Parker, Scott [Argonne National Lab. (ANL), Argonne, IL (United States); Kumaran, Kalyan [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-12-01

We present Raexplore, a performance modeling framework for architecture exploration. Raexplore enables rapid, automated, and systematic search of architecture design space by combining hardware counter-based performance characterization and analytical performance modeling. We demonstrate Raexplore for two recent manycore processors IBM Blue- Gene/Q compute chip and Intel Xeon Phi, targeting a set of scientific applications. Our framework is able to capture complex interactions between architectural components including instruction pipeline, cache, and memory, and to achieve a 3–22% error for same-architecture and cross-architecture performance predictions. Furthermore, we apply our framework to assess the two processors, and discover and evaluate a list of architectural scaling options for future processor designs.

Radiology systems architecture.

Science.gov (United States)

Deibel, S R; Greenes, R A

1996-05-01

This article focuses on the software requirements for enterprise integration in radiology. The needs of a future radiology systems architecture are examined, both at a concrete functional level and at an abstract system-properties level. A component-based approach to software development is described and is validated in the context of each of the abstract system requirements for future radiology computing environments.

Excitation transfer in two two-level systems coupled to an oscillator

International Nuclear Information System (INIS)

Hagelstein, P L; Chaudhary, I U

2008-01-01

We consider a generalization of the spin-boson model in which two different two-level systems are coupled to an oscillator, under conditions where the oscillator energy is much less than the two-level system energies, and where the oscillator is highly excited. We find that the two-level system transition energy is shifted, producing a Bloch-Siegert shift in each two-level system similar to what would be obtained if the other were absent. At resonances associated with energy exchange between a two-level system and the oscillator, the level splitting is about the same as would be obtained in the spin-boson model at a Bloch-Siegert resonance. However, there occur resonances associated with the transfer of excitation between one two-level system and the other, an effect not present in the spin-boson model. We use a unitary transformation leading to a rotated system in which terms responsible for the shift and splittings can be identified. The level splittings at the anticrossings associated with both energy exchange and excitation transfer resonances are accounted for with simple two-state models and degenerate perturbation theory using operators that appear in the rotated Hamiltonian

Coordinating space telescope operations in an integrated planning and scheduling architecture

Science.gov (United States)

Muscettola, Nicola; Smith, Stephen F.; Cesta, Amedeo; D'Aloisi, Daniela

1992-01-01

The Heuristic Scheduling Testbed System (HSTS), a software architecture for integrated planning and scheduling, is discussed. The architecture has been applied to the problem of generating observation schedules for the Hubble Space Telescope. This problem is representative of the class of problems that can be addressed: their complexity lies in the interaction of resource allocation and auxiliary task expansion. The architecture deals with this interaction by viewing planning and scheduling as two complementary aspects of the more general process of constructing behaviors of a dynamical system. The principal components of the software architecture are described, indicating how to model the structure and dynamics of a system, how to represent schedules at multiple levels of abstraction in the temporal database, and how the problem solving machinery operates. A scheduler for the detailed management of Hubble Space Telescope operations that has been developed within HSTS is described. Experimental performance results are given that indicate the utility and practicality of the approach.

The Timelessness Quality In Architecture

Directory of Open Access Journals (Sweden)

Sally Essawy

2017-02-01

Full Text Available This paper explores the process of defining an aesthetic philosophy and criteria of Timeless architecture and using it to enhance building effect on users. An argument is made for the justification of the concepts manifested for a timeless architectural aesthetic over the continuation of the current paradigm. The various factors that influence the development of a timeless aesthetic are also discussed including architectural concept varying style references and the moral and social obligation that timelessness represents. By the end principles of a timeless aesthetic architecture are established that timelessness represents a practical philosophy that timelessness serves as the concept generator in the design process and that timeless architecture is universally specific to the constraints of its concepts and style. Two case studies are also examined in relation to these principles as well as more qualitative and quantitative evaluation factors.

Modeling Architectural Patterns Using Architectural Primitives

NARCIS (Netherlands)

Zdun, Uwe; Avgeriou, Paris

2005-01-01

Architectural patterns are a key point in architectural documentation. Regrettably, there is poor support for modeling architectural patterns, because the pattern elements are not directly matched by elements in modeling languages, and, at the same time, patterns support an inherent variability that

Comparative Study of Bio-implantable Acoustic Generator Architectures

International Nuclear Information System (INIS)

Christensen, D; Roundy, S

2013-01-01

This paper is a comparative study of the design spaces of two bio-implantable acoustically excited generator architectures: the thickness-stretch-mode circular piezoelectric plate and the bending-mode unimorph piezoelectric diaphragm. The generators are part of an acoustic power transfer system for implanted sensors and medical devices such as glucose monitors, metabolic monitors, drug delivery systems, etc. Our studies indicate that at small sizes the diaphragm architecture outperforms the plate architecture. This paper will present the results of simulation studies and initial experiments that explore the characteristics of the two architectures and compare their performance

Integrated procedures and monitoring methodologies for thermographic investigations of architectural heritage: two applicative cases in Sicily, Italy

International Nuclear Information System (INIS)

Bianco, A.

2013-01-01

The paper explains some opportunities and limitations of thermographic investigations in terms of their capability to define the conservative conditions of architectural heritage and in terms of the historical recollection for a technical diagnosis. Different approaches are demonstrated in two case studies: the first integrates thermography with other investigative methods; the second combines thermographic monitoring with hygrothermal monitoring. (author)

Comparing architectural solutions of IPT application SDKs utilizing H.323 and SIP

Science.gov (United States)

Keskinarkaus, Anja; Korhonen, Jani; Ohtonen, Timo; Kilpelanaho, Vesa; Koskinen, Esa; Sauvola, Jaakko J.

2001-07-01

This paper presents two approaches to efficient service development for Internet Telephony. In first approach we consider services ranging from core call signaling features and media control as stated in ITU-T's H.323 to end user services that supports user interaction. The second approach supports IETF's SIP protocol. We compare these from differing architectural perspectives, economy of network and terminal development, and propose efficient architecture models for both protocols. In their design, the main criteria were component independence, lightweight operation and portability in heterogeneous end-to-end environments. In proposed architecture, the vertical division of call signaling and streaming media control logic allows for using the components either individually or combined, depending on the level of functionality required by an application.

Hierarchical architecture of active knits

International Nuclear Information System (INIS)

Abel, Julianna; Luntz, Jonathan; Brei, Diann

2013-01-01

Nature eloquently utilizes hierarchical structures to form the world around us. Applying the hierarchical architecture paradigm to smart materials can provide a basis for a new genre of actuators which produce complex actuation motions. One promising example of cellular architecture—active knits—provides complex three-dimensional distributed actuation motions with expanded operational performance through a hierarchically organized structure. The hierarchical structure arranges a single fiber of active material, such as shape memory alloys (SMAs), into a cellular network of interlacing adjacent loops according to a knitting grid. This paper defines a four-level hierarchical classification of knit structures: the basic knit loop, knit patterns, grid patterns, and restructured grids. Each level of the hierarchy provides increased architectural complexity, resulting in expanded kinematic actuation motions of active knits. The range of kinematic actuation motions are displayed through experimental examples of different SMA active knits. The results from this paper illustrate and classify the ways in which each level of the hierarchical knit architecture leverages the performance of the base smart material to generate unique actuation motions, providing necessary insight to best exploit this new actuation paradigm. (paper)

Fiber-wireless convergence in next-generation communication networks systems, architectures, and management

CERN Document Server

Chang, Gee-Kung; Ellinas, Georgios

2017-01-01

This book investigates new enabling technologies for Fi-Wi convergence. The editors discuss Fi-Wi technologies at the three major network levels involved in the path towards convergence: system level, network architecture level, and network management level. The main topics will be: a. At system level: Radio over Fiber (digitalized vs. analogic, standardization, E-band and beyond) and 5G wireless technologies; b. Network architecture level: NGPON, WDM-PON, BBU Hotelling, Cloud Radio Access Networks (C-RANs), HetNets. c. Network management level: SDN for convergence, Next-generation Point-of-Presence, Wi-Fi LTE Handover, Cooperative MultiPoint. • Addresses the Fi-Wi convergence issues at three different levels, namely at the system level, network architecture level, and network management level • Provides approaches in communication systems, network architecture, and management that are expected to steer the evolution towards fiber-wireless convergence • Contributions from leading experts in the field of...

Ragnarok: An Architecture Based Software Development Environment

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak

of the development process. The main contributions presented in the thesis have evolved from work with two of the hypotheses: These address the problems of management of evolution, and overview, comprehension and navigation respectively. The first main contribution is the Architectural Software Configuration...... Management Model: A software configuration management model where the abstractions and hierarchy of the logical aspect of software architecture forms the basis for version control and configuration management. The second main contribution is the Geographic Space Architecture Visualisation Model......: A visualisation model where entities in a software architecture are organised geographically in a two-dimensional plane, their visual appearance determined by processing a subset of the data in the entities, and interaction with the project's underlying data performed by direct manipulation of the landscape...

Bridging a divide: architecture for a joint hospital-primary care data warehouse.

Science.gov (United States)

An, Jeff; Keshavjee, Karim; Mirza, Kashif; Vassanji, Karim; Greiver, Michelle

2015-01-01

Healthcare costs are driven by a surprisingly small number of patients. Predicting who is likely to require care in the near future could help reduce costs by pre-empting use of expensive health care resources such as emergency departments and hospitals. We describe the design of an architecture for a joint hospital-primary care data warehouse (JDW) that can monitor the effectiveness of in-hospital interventions in reducing readmissions and predict which patients are most likely to be admitted to hospital in the near future. The design identifies the key governance elements, the architectural principles, the business case, the privacy architecture, future work flows, the IT infrastructure, the data analytics and the high level implementation plan for realization of the JDW. This architecture fills a gap in bridging data from two separate hospital and primary care organizations, not a single managed care entity with multiple locations. The JDW architecture design was well received by the stakeholders engaged and by senior leadership at the hospital and the primary care organization. Future plans include creating a demonstration system and conducting a pilot study.

Real-time FPGA architectures for computer vision

Science.gov (United States)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2000-03-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low level image processing. The FPGA-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on a dedicated VLSI to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real time performance are discussed. Some results are presented and discussed.

Domain architecture conservation in orthologs

Science.gov (United States)

2011-01-01

Background As orthologous proteins are expected to retain function more often than other homologs, they are often used for functional annotation transfer between species. However, ortholog identification methods do not take into account changes in domain architecture, which are likely to modify a protein's function. By domain architecture we refer to the sequential arrangement of domains along a protein sequence. To assess the level of domain architecture conservation among orthologs, we carried out a large-scale study of such events between human and 40 other species spanning the entire evolutionary range. We designed a score to measure domain architecture similarity and used it to analyze differences in domain architecture conservation between orthologs and paralogs relative to the conservation of primary sequence. We also statistically characterized the extents of different types of domain swapping events across pairs of orthologs and paralogs. Results The analysis shows that orthologs exhibit greater domain architecture conservation than paralogous homologs, even when differences in average sequence divergence are compensated for, for homologs that have diverged beyond a certain threshold. We interpret this as an indication of a stronger selective pressure on orthologs than paralogs to retain the domain architecture required for the proteins to perform a specific function. In general, orthologs as well as the closest paralogous homologs have very similar domain architectures, even at large evolutionary separation. The most common domain architecture changes observed in both ortholog and paralog pairs involved insertion/deletion of new domains, while domain shuffling and segment duplication/deletion were very infrequent. Conclusions On the whole, our results support the hypothesis that function conservation between orthologs demands higher domain architecture conservation than other types of homologs, relative to primary sequence conservation. This supports the

Experimental investigation on heating performance of heat pump for electric vehicles at −20 °C ambient temperature

International Nuclear Information System (INIS)

Qin, Fei; Xue, Qingfeng; Albarracin Velez, Giovanny Marcelo; Zhang, Guiying; Zou, Huiming; Tian, Changqing

2015-01-01

Highlights: • An ASHP system with refrigerant injection for EVs is designed, for cold regions. • The heat performances of the system are tested at −20 °C ambient temperature. • The system cycle process with refrigerant injection are analyzed on lgP-H diagrams. • The effects of refrigerant injection, dryness, and in-car inlet state are discussed. • The new system can improve heating and own better application prospect. - Abstract: Since the performance of conventional air source heat pump (ASHP) for electric vehicles (EVs) is apt to decline sharply in low ambient temperature, it will consume more electricity of the cell, and affect driving mileage in cold regions. Aiming at developing high efficiency heating system for EVs in cold regions, an ASHP system applying refrigerant injection for EVs is designed, as well as the test bench is built to investigate its performance. According to the operation condition of EVs, heating performances are tested on different in-car inlet air temperature and various fresh air ratios under −20 °C ambient temperature. The system cycle process with refrigerant injection, as well as the influences of refrigerant injection and dryness are also analyzed and discussed. The results show that the heating capacity of the ASHP with refrigerant injection can be increased up to 31%, and in comparison with the conventional heat pump system its heating performance is better when in-car inlet temperature is above −10 °C. Therefore, ASHP with refrigerant injection has great potentiality to be applied for the EVs in cold regions

Accuracy Test of Software Architecture Compliance Checking Tools : Test Instruction

NARCIS (Netherlands)

Prof.dr. S. Brinkkemper; Dr. Leo Pruijt; C. Köppe; J.M.E.M. van der Werf

2015-01-01

Author supplied: "Abstract Software Architecture Compliance Checking (SACC) is an approach to verify conformance of implemented program code to high-level models of architectural design. Static SACC focuses on the modular software architecture and on the existence of rule violating dependencies

Le Corbusier, Pierre Chareau and two masterpieces of modern architecture

Directory of Open Access Journals (Sweden)

Sílvia Amaral Palazzi Zakia

2015-06-01

Full Text Available Le Corbusier and Pierre Chareau are famously responsible for two projects considered iconic of modern architecture: Villa Savoye and Maison de Verre. Both are coeval and commissioned by clients with the same socioeconomic profile – the French haute bourgeoisie –, and with similar needs. Villa Savoye is a single family home, while Maison de Verre houses both residential and medical clinic functions in the same building structure. However, this difference does not interfere in our intended analysis. By comparing the client-architect relationships in both projects – Le Corbusier/Savoye and Chareau/Dalsace – we raise  questions regarding the professional behavior that modern architects have arrogated to themselves: to revolutionize customs and practices. The projects are modern and diverse responses to similar requests. In both cases, the role of women is indicative of their influence in that particular historical context as opinion setters. The house is the locus of the female dominium, and as such expresses women’s tastes and habits.

Air-Source Integrated Heat Pump System Development – Final Report

Energy Technology Data Exchange (ETDEWEB)

Baxter, Van D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Munk, Jeffrey D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ally, Moonis R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Uselton, R. B. [Lennox Industries, Inc., Knoxville, TN (United States)

2017-07-01

Between October 2007 and September 2017, Oak Ridge National Laboratory (ORNL) and Lennox Industries, Inc. (Lennox) engaged in a Cooperative Research and Development Agreement (CRADA) to develop an air-source integrated heat pump (AS-IHP) system for the US residential market. The Lennox AS-IHP concept consisted of a high-efficiency air-source heat pump (ASHP) for space heating and cooling services and a separate heat pump water heater/dehumidifier (WH/DH) module for domestic water heating and dehumidification (DH) services. A key feature of this system approach with the separate WH/DH is capability to pretreat (i.e., dehumidify) ventilation air and dedicated whole-house DH independent of the ASHP. Two generations of laboratory prototype WH/DH units were designed, fabricated, and lab tested. Performance maps for the system were developed using the latest research version of the US Department of Energy/ORNL heat pump design model (Rice 1992; Rice and Jackson 2005; Shen et al. 2012) as calibrated against the lab test data. These maps served as the input to TRNSYS (Solar Energy Laboratory et al. 2010) to predict annual performance relative to a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (i.e., a combination of an ASHP with a seasonal energy efficiency ratio (SEER) of 13 and resistance water heater with an energy factor (EF) of 0.9). Predicted total annual energy savings (based on use of a two-speed ASHP and the second-generation WH/DH prototype for the AS-IHP), while providing space conditioning, water heating, and dehumidification for a tight, well-insulated 2600 ft2 (242 m2) house at three US locations, ranged from 33 to 36%, averaging 35%, relative to the baseline system. The lowest savings were seen at the cold-climate Chicago location. Predicted energy use for water heating was reduced by about 50 to 60% relative to a resistance WH.

From Smart-Eco Building to High-Performance Architecture: Optimization of Energy Consumption in Architecture of Developing Countries

Science.gov (United States)

Mahdavinejad, M.; Bitaab, N.

2017-08-01

Search for high-performance architecture and dreams of future architecture resulted in attempts towards meeting energy efficient architecture and planning in different aspects. Recent trends as a mean to meet future legacy in architecture are based on the idea of innovative technologies for resource efficient buildings, performative design, bio-inspired technologies etc. while there are meaningful differences between architecture of developed and developing countries. Significance of issue might be understood when the emerging cities are found interested in Dubaization and other related booming development doctrines. This paper is to analyze the level of developing countries’ success to achieve smart-eco buildings’ goals and objectives. Emerging cities of West of Asia are selected as case studies of the paper. The results of the paper show that the concept of high-performance architecture and smart-eco buildings are different in developing countries in comparison with developed countries. The paper is to mention five essential issues in order to improve future architecture of developing countries: 1- Integrated Strategies for Energy Efficiency, 2- Contextual Solutions, 3- Embedded and Initial Energy Assessment, 4- Staff and Occupancy Wellbeing, 5- Life-Cycle Monitoring.

Hybrid POMDP-BDI Agent Architecture with Online Stochastic Planning and Desires with Changing Intensity Levels

CSIR Research Space (South Africa)

Rens, GB

2015-01-01

Full Text Available The authors propose an agent architecture which combines Partially observable Markov decision processes (POMDPs) and the belief-desire-intention (BDI) framework have several complementary strengths. The authors propose an agent architecture, which...

Clock generators for SOC processors circuits and architectures

CERN Document Server

Fahim, Amr

2004-01-01

This book explores the design of fully-integrated frequency synthesizers suitable for system-on-a-chip (SOC) processors. The text takes a more global design perspective in jointly examining the design space at the circuit level as well as at the architectural level. The comprehensive coverage includes summary chapters on circuit theory as well as feedback control theory relevant to the operation of phase locked loops (PLLs). On the circuit level, the discussion includes low-voltage analog design in deep submicron digital CMOS processes, effects of supply noise, substrate noise, as well device noise. On the architectural level, the discussion includes PLL analysis using continuous-time as well as discrete-time models, linear and nonlinear effects of PLL performance, and detailed analysis of locking behavior. The book provides numerous real world applications, as well as practical rules-of-thumb for modern designers to use at the system, architectural, as well as the circuit level.

Effect of Ceramic Scaffold Architectural Parameters on Biological Response

Directory of Open Access Journals (Sweden)

Maria Isabella eGariboldi

2015-10-01

Full Text Available Numerous studies have focused on the optimization of ceramic architectures to fulfill a variety of scaffold functional requirements and improve biological response. Conventional fabrication techniques, however, do not allow for the production of geometrically controlled, reproducible structures and often fail to allow the independent variation of individual geometric parameters. Current developments in additive manufacturing technologies suggest that 3D printing will allow a more controlled and systematic exploration of scaffold architectures. This more direct translation of design into structure requires a pipeline for design-driven optimization. A theoretical framework for systematic design and evaluation of architectural parameters on biological response is presented. Four levels of architecture are considered, namely (1 surface topography, (2 pore size and geometry, (3 porous networks and (4 macroscopic pore arrangement, including the potential for spatially varied architectures. Studies exploring the effect of various parameters within these levels are reviewed. This framework will hopefully allow uncovering of new relationships between architecture and biological response in a more systematic way, as well as inform future refinement of fabrication techniques to fulfill architectural necessities with a consideration of biological implications.

Invisible Elderly in Danish and Swedish Residential Care Home Architecture

DEFF Research Database (Denmark)

E Andersson, Jonas; Grangaard, Sidse

2015-01-01

This study of two architectural competitions suggests that the fit between architectural design and older users, who depend on regular caregiving due to cognitive or functional disabilities, requires a particular consideration when designing new residential care homes.......This study of two architectural competitions suggests that the fit between architectural design and older users, who depend on regular caregiving due to cognitive or functional disabilities, requires a particular consideration when designing new residential care homes....

A flexible and low cost experimental stand for air source heat pump for Smart Buildings

DEFF Research Database (Denmark)

Crăciun, Vasile S.; Bojesen, Carsten; Blarke, Morten

2012-01-01

Energy systems are faced with the challenges of reducing dependency on fossil fuels, while handling increasing penetration levels of intermittent renewables such as wind and solar power. At the same time, the efficient consumption of energy is vital for avoiding the impacts from increasing fuel...... prices. A significant part of this challenge may be dealt with in the way space heating, space cooling, and domestic hot water production which is provided to residential and commercial buildings. Air source heat pumps (ASHP) are widely used conversion technologies for providing building thermal energy...... services; cooling, heating, and water heating. ASHP does not have a constant temperature for the primary source like: soil, ground water, or surface water heat pumps. In result, laboratory experiments and tests are faced by the problem of having to handle a wide range of conditions under which...

Air Source Heat Pump a Key Role in the Development of Smart Buildings in Future Energy Systems

DEFF Research Database (Denmark)

Craciun, Vasile S.; Trifa, Viorel; Bojesen, Carsten

2012-01-01

An important challenge for energy systems today is reducing dependency on fossil fuels, while handling increasing penetration levels of intermittent renewables such as wind and solar power. The efficient consumption of energy is a vital mater for a sustainable energy system. A significant part...... of energy is used for space heating, space cooling, and domestic hot water production which are provided to residential and commercial buildings. Air source heat pumps (ASHP) are widely used conversion technologies all over the world for providing building thermal energy services as: cooling, heating......, and water heating. ASHP does not have a constant temperature for the primary source like: soil, ground water, or surface water heat pumps but still have a majority in usage. As result, laboratory experiments and tests are faced by the problem of having to handle a wide range of conditions under which...

Thread-level parallelization and optimization of NWChem for the Intel MIC architecture

Energy Technology Data Exchange (ETDEWEB)

Shan, Hongzhang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Samuel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); de Jong, Wibe [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oliker, Leonid [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-01-01

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments. In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant e ort was required to safely and efeciently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI+OpenMP hybrid implementations attain up to 65× better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6× better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.

Thread-Level Parallelization and Optimization of NWChem for the Intel MIC Architecture

Energy Technology Data Exchange (ETDEWEB)

Shan, Hongzhang; Williams, Samuel; Jong, Wibe de; Oliker, Leonid

2014-10-10

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments. In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in tt native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant effort was required to safely and efficiently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI OpenMP hybrid implementations attain up to 65x better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6x better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.

Architecture as mediator of culture, democracy and hope: XXIII World Congress of Architecture in Turin

Directory of Open Access Journals (Sweden)

Bogdanov Ana

2009-01-01

Full Text Available The XXIII World Congress of Architecture organized by The International Union of Architects (UIA was held in Turin from June 29 to July 03. Every third year this great architectural event gathers together more than one thousand professionals and students from 126 countries that UIA encompasses today. The main topic of the this year Congress was 'Transmitting Architecture' suggesting that future architecture will increasingly depend on communication and integration. It also suggests that global problems which architecture has been encountered with in recent years should be considered at all levels through ever active network of information and communications. In that term exchanging and sharing knowledge and experience among architects of different national and social backgrounds are crucial. Besides, transmitting architecture has also a faint futuristic sound which points out new technologies and their increasing importance in architecture. At last, this topic emphasize that the Congress has been oriented towards and open to not only academic discussions, but to younger generations and students who have always been most experienced in using digital technologies. Throughout the Congress Programme which consisted of lectures, debates, workshops exhibitions, where more than 600 speakers participated, various topics were discussed with a common aim to gain an insight into the situation on current architectural scene, to realize the position of architects and architecture in today's sphere of social, political, cultural, technical and technological factors, and consequently to establish possible tracks and offer recommendations for further progress in this field. Out of Congress, the participants had the opportunity of being introduced to Turin, the city of vision and sustainability put into action.

The Chameleon Architecture for Streaming DSP Applications

Directory of Open Access Journals (Sweden)

André B. J. Kokkeler

2007-02-01

Full Text Available We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm2 in a 130 nm process, is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC via a network interface (NI. Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT and best effort (BE. For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool.

The Chameleon Architecture for Streaming DSP Applications

Directory of Open Access Journals (Sweden)

Heysters PaulM

2007-01-01

Full Text Available We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm2 in a 130 nm process, is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC via a network interface (NI. Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT and best effort (BE. For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool.

Fault-tolerant architecture: Evaluation methodology

International Nuclear Information System (INIS)

Battle, R.E.; Kisner, R.A.

1992-08-01

The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

What is Islamic architecture anyway?

Directory of Open Access Journals (Sweden)

Nasser Rabbat

2012-06-01

Full Text Available This article offers a critical review of scholarship on Islamic architecture in the last two centuries. It raises methodological and historiographical questions about the field’s formation, development, and historical and theoretical contours through a discussion of the positions of its main figures. One question treated here is that of how to study a culturally defined architectural tradition like Islamic architecture without reducing it to essential and timeless categories. Another question is that of how one is to critique the dominant Western paradigm without turning away from its comparative perspective. But the most important goal of the article is to reclaim the assumed temporal boundaries of Islamic architecture – Late Antiquity as a predecessor and modernism as a successor – as constitutive forces in its evolution and definition.

A "Language Lab" for Architectural Design.

Science.gov (United States)

Mackenzie, Arch; And Others

This paper discusses a "language lab" strategy in which traditional studio learning may be supplemented by language lessons using computer graphics techniques to teach architectural grammar, a body of elements and principles that govern the design of buildings belonging to a particular architectural theory or style. Two methods of…

Persian architecture and mathematics

CERN Document Server

2012-01-01

This volulme features eight original papers dedicated to the theme “Persian Architecture and Mathematics,” guest edited by Reza Sarhangi. All papers were approved through a rigorous process of blind peer review and edited by an interdisciplinary scientific editorial committee. Topics range from symmetry in ancient Persian architecture to the elaborate geometric patterns and complex three-dimensional structures of standing monuments of historical periods, from the expression of mathematical ideas to architectonic structures, and from decorative ornament to the representation of modern group theory and quasi-crystalline patterns. The articles discuss unique monuments Persia, including domed structures and two-dimensional patterns, which have received significant scholarly attention in recent years. This book is a unique contribution to studies of Persian architecture in relation to mathematics.

Architectural prototyping

DEFF Research Database (Denmark)

Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

2004-01-01

A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

Two Stage Secure Dynamic Load Balancing Architecture for SIP Server Clusters

Directory of Open Access Journals (Sweden)

G. Vennila

2014-08-01

Full Text Available Session Initiation Protocol (SIP is a signaling protocol emerged with an aim to enhance the IP network capabilities in terms of complex service provision. SIP server scalability with load balancing has a greater concern due to the dramatic increase in SIP service demand. Load balancing of session method (request/response and security measures optimizes the SIP server to regulate of network traffic in Voice over Internet Protocol (VoIP. Establishing a honeywall prior to the load balancer significantly reduces SIP traffic and drops inbound malicious load. In this paper, we propose Active Least Call in SIP Server (ALC_Server algorithm fulfills objectives like congestion avoidance, improved response times, throughput, resource utilization, reducing server faults, scalability and protection of SIP call from DoS attacks. From the test bed, the proposed two-tier architecture demonstrates that the ALC_Server method dynamically controls the overload and provides robust security, uniform load distribution for SIP servers.

Negative price-image effects of appealing store architecture

DEFF Research Database (Denmark)

Zielke, Stephan; Toporowski, Waldemar

2012-01-01

Retailers often worry about the negative effects of appealing exterior architecture on their store's price image, especially the price-level perception and the ease of price evaluation. Findings from prior laboratory experiments support these concerns, while field studies find no such effects. Th....... The availability of price information neutralizes the negative effects of appealing architecture on the price-level perception, but not on the ease of price evaluation....

Architectural switches in plant thylakoid membranes.

Science.gov (United States)

Kirchhoff, Helmut

2013-10-01

Recent progress in elucidating the structure of higher plants photosynthetic membranes provides a wealth of information. It allows generation of architectural models that reveal well-organized and complex arrangements not only on whole membrane level, but also on the supramolecular level. These arrangements are not static but highly responsive to the environment. Knowledge about the interdependency between dynamic structural features of the photosynthetic machinery and the functionality of energy conversion is central to understanding the plasticity of photosynthesis in an ever-changing environment. This review summarizes the architectural switches that are realized in thylakoid membranes of green plants.

Enterprise architecture, a blueprint for enterprise logistics rollout

CSIR Research Space (South Africa)

Coetzee, J

2013-08-01

Full Text Available In this paper it is proposed that Enterprise architecture in principle develops the Logistic Support model for systems on System Hierarchical Level 6 and higher. The Enterprise architectural model is a blue print, like the DNA for biological systems...

A two-dimensional Zn coordination polymer with a three-dimensional supra-molecular architecture.

Science.gov (United States)

Liu, Fuhong; Ding, Yan; Li, Qiuyu; Zhang, Liping

2017-10-01

The title compound, poly[bis-{μ 2 -4,4'-bis-[(1,2,4-triazol-1-yl)meth-yl]biphenyl-κ 2 N 4 : N 4' }bis-(nitrato-κ O )zinc(II)], [Zn(NO 3 ) 2 (C 18 H 16 N 6 ) 2 ] n , is a two-dimensional zinc coordination polymer constructed from 4,4'-bis-[(1 H -1,2,4-triazol-1-yl)meth-yl]-1,1'-biphenyl units. It was synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. The Zn II cation is located on an inversion centre and is coordinated by two O atoms from two symmetry-related nitrate groups and four N atoms from four symmetry-related 4,4'-bis-[(1 H -1,2,4-triazol-1-yl)meth-yl]-1,1'-biphenyl ligands, forming a distorted octa-hedral {ZnN 4 O 2 } coordination geometry. The linear 4,4'-bis-[(1 H -1,2,4-triazol-1-yl)meth-yl]-1,1'-biphenyl ligand links two Zn II cations, generating two-dimensional layers parallel to the crystallographic (132) plane. The parallel layers are connected by C-H⋯O, C-H⋯N, C-H⋯π and π-π stacking inter-actions, resulting in a three-dimensional supra-molecular architecture.

Design of a Load-Balancing Architecture For Parallel Firewalls

National Research Council Canada - National Science Library

Joyner, William

1999-01-01

.... This thesis proposes a load-balancing firewall architecture to meet the Navy's needs. It first conducts an architectural analysis of the problem and then presents a high-level system design as a solution...

An intelligent service-based layered architecture for e learning and assessment

International Nuclear Information System (INIS)

Javaid, Q.; Arif, F.

2017-01-01

The rapid advancement in ICT (Information and Communication Technology) is causing a paradigm shift in eLearning domain. Traditional eLearning systems suffer from certain shortcomings like tight coupling of system components, lack of personalization, flexibility, and scalability and performance issues. This study aims at addressing these challenges through an MAS (Multi Agent System) based multi-layer architecture supported by web services. The foremost objective of this study is to enhance learning process efficiency by provision of flexibility features for learning and assessment processes. Proposed architecture consists of two sub-system namely eLearning and eAssesssment. This architecture comprises of five distinct layers for each sub-system, with active agents responsible for miscellaneous tasks including content handling, updating, resource optimization, load handling and provision of customized environments for learners and instructors. Our proposed architecture aims at establishment of a facilitation level to learners as well as instructors for convenient acquisition and dissemination of knowledge. Personalization features like customized environments, personalized content retrieval and recommendations, adaptive assessment and reduced response time, are believed to significantly enhance learning and tutoring experience. In essence characteristics like intelligence, personalization, interactivity, usability, laidback accessibility and security, signify aptness of proposed architecture for improving conventional learning and assessment processes. Finally we have evaluated our proposed architecture by means of analytical comparison and survey considering certain quality attributes. (author)

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... proportions, to organize the process on site choosing either one room wall components or several rooms wall components – either horizontally or vertically. Combined with the seamless joint the playing with these possibilities the new industrialized architecture can deliver variations in choice of solutions...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Architectural freedom and industrialized architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to explain that architecture can be thought as a complex and diverse design through customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performing expression in direct relation to the given context. Through the last couple of years we have...... expression in the specific housing area. It is the aim of this article to expand the different design strategies which architects can use – to give the individual project attitudes and designs with architectural quality. Through the customized component production it is possible to choose different...... for retrofit design. If we add the question of the installations e.g. ventilation to this systematic thinking of building technique we get a diverse and functional architecture, thereby creating a new and clearer story telling about new and smart system based thinking behind architectural expression....

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

Architectural freedom and industrialized architecture. Inge Vestergaard, Associate Professor, Cand. Arch. Aarhus School of Architecture, Denmark Noerreport 20, 8000 Aarhus C Telephone +45 89 36 0000 E-mai l inge.vestergaard@aarch.dk Based on the repetitive architecture from the "building boom" 1960...... customization, telling exactly the revitalized storey about the change to a contemporary sustainable and better performed expression in direct relation to the given context. Through the last couple of years we have in Denmark been focusing a more sustainable and low energy building technique, which also include...... to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...

Two-step values for games with two-level communication structure

NARCIS (Netherlands)

Béal, Silvain; Khmelnitskaya, Anna Borisovna; Solal, Philippe

TU games with two-level communication structure, in which a two-level communication structure relates fundamentally to the given coalition structure and consists of a communication graph on the collection of the a priori unions in the coalition structure, as well as a collection of communication

Architecture and mathematics from antiquity to the future

CERN Document Server

2015-01-01

The aim of this collection of essays is to present a broad portrait of the ways in which two seemingly different disciplines are interconnected. The diversity and varied texture of the essays richly illustrates the affinity between architecture and mathematics. As the almost 100 papers presented in this two-volume publication show, every age and every culture has relied on principles of mathematics incorporated in their works of architecture to imbue their built environment with meaning and order. Included are discussions of geometry, proportional systems, linear algebra, periodic and aperiodic tilings, fractals, perspective, computer science and mechanics. Western architecture of every period is examined: Egyptian, Roman, Medieval, Renaissance, Baroque, Enlightenment, twentieth-century and beyond, as is the architecture of Turkey, China, India, Japan, Australia and Islam. The mathematical nature of the architecture of Leon Battista Alberti, Andrea Palladio and Frank Lloyd Wright is examined, and the philosop...

The NOAA Satellite Observing System Architecture Study

Science.gov (United States)

Volz, Stephen; Maier, Mark; Di Pietro, David

2016-01-01

NOAA is beginning a study, the NOAA Satellite Observing System Architecture (NSOSA) study, to plan for the future operational environmental satellite system that will follow GOES and JPSS, beginning about 2030. This is an opportunity to design a modern architecture with no pre-conceived notions regarding instruments, platforms, orbits, etc. The NSOSA study will develop and evaluate architecture alternatives to include partner and commercial alternatives that are likely to become available. The objectives will include both functional needs and strategic characteristics (e.g., flexibility, responsiveness, sustainability). Part of this study is the Space Platform Requirements Working Group (SPRWG), which is being commissioned by NESDIS. The SPRWG is charged to assess new or existing user needs and to provide relative priorities for observational needs in the context of the future architecture. SPRWG results will serve as input to the process for new foundational (Level 0 and Level 1) requirements for the next generation of NOAA satellites that follow the GOES-R, JPSS, DSCOVR, Jason-3, and COSMIC-2 missions.

How do architecture patterns and tactics interact? A model and annotation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2010-01-01

Software architecture designers inevitably work with both architecture patterns and tactics. Architecture patterns describe the high-level structure and behavior of software systems as the solution to multiple system requirements, whereas tactics are design decisions that improve individual quality

Enterprise architecture evaluation using architecture framework and UML stereotypes

Directory of Open Access Journals (Sweden)

Narges Shahi

2014-08-01

Full Text Available There is an increasing need for enterprise architecture in numerous organizations with complicated systems with various processes. Support for information technology, organizational units whose elements maintain complex relationships increases. Enterprise architecture is so effective that its non-use in organizations is regarded as their institutional inability in efficient information technology management. The enterprise architecture process generally consists of three phases including strategic programing of information technology, enterprise architecture programing and enterprise architecture implementation. Each phase must be implemented sequentially and one single flaw in each phase may result in a flaw in the whole architecture and, consequently, in extra costs and time. If a model is mapped for the issue and then it is evaluated before enterprise architecture implementation in the second phase, the possible flaws in implementation process are prevented. In this study, the processes of enterprise architecture are illustrated through UML diagrams, and the architecture is evaluated in programming phase through transforming the UML diagrams to Petri nets. The results indicate that the high costs of the implementation phase will be reduced.

Software architecture 2

CERN Document Server

Oussalah, Mourad Chabanne

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

Lightweight enterprise architectures

CERN Document Server

Theuerkorn, Fenix

2004-01-01

STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen

Software architecture 1

CERN Document Server

Oussalah , Mourad Chabane

2014-01-01

Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

Evolution of the Ethane Architecture

National Research Council Canada - National Science Library

Casado, Martin; Shenker, Scott

2009-01-01

The Ethane architecture, developed at Stanford University, demonstrated that a novel approach to building secure networks could support superior low-level security and flexible policy-based control over individual flows...

Implementing the Freight Transportation Data Architecture : Data Element Dictionary

Science.gov (United States)

2015-01-01

NCFRP Report 9: Guidance for Developing a Freight Data Architecture articulates the value of establishing architecture for linking data across modes, subjects, and levels of geography to obtain essential information for decision making. Central to th...

Analysis of air-to-water heat pump in cold climate: comparison between experiment and simulation

Directory of Open Access Journals (Sweden)

Karolis Januševičius

2015-10-01

Full Text Available Heat pump systems are promising technologies for current and future buildings and this research presents the performance of air source heat pump (ASHP system. The system was monitored, analysed and simulated using TRNSYS software. The experimental data were used to calibrate the simulation model of ASHP. The specific climate conditions are evaluated in the model. It was noticed for the heating mode that the coefficient of performance (COP varied from 1.98 to 3.05 as the outdoor temperature changed from –7.0 ºC to +5.0 ºC, respectively. TRNSYS simulations were also performed to predict seasonal performance factor of the ASHP for Vilnius city. It was identified that seasonal performance prediction could be approximately 15% lower if frost formation effects are not included to air-water heat pump simulation model.

Indigenous architecture as a context-oriented architecture, a look at ...

African Journals Online (AJOL)

What has become problematic as the achievement of international style and globalization of architecture during the time has been the purely technological look at architecture, and the architecture without belonging to a place. In recent decades, the topic of sustainable architecture and reconsidering indigenous architecture ...

A modeling process to understand complex system architectures

Science.gov (United States)

Robinson, Santiago Balestrini

2009-12-01

In recent decades, several tools have been developed by the armed forces, and their contractors, to test the capability of a force. These campaign level analysis tools, often times characterized as constructive simulations are generally expensive to create and execute, and at best they are extremely difficult to verify and validate. This central observation, that the analysts are relying more and more on constructive simulations to predict the performance of future networks of systems, leads to the two central objectives of this thesis: (1) to enable the quantitative comparison of architectures in terms of their ability to satisfy a capability without resorting to constructive simulations, and (2) when constructive simulations must be created, to quantitatively determine how to spend the modeling effort amongst the different system classes. The first objective led to Hypothesis A, the first main hypotheses, which states that by studying the relationships between the entities that compose an architecture, one can infer how well it will perform a given capability. The method used to test the hypothesis is based on two assumptions: (1) the capability can be defined as a cycle of functions, and that it (2) must be possible to estimate the probability that a function-based relationship occurs between any two types of entities. If these two requirements are met, then by creating random functional networks, different architectures can be compared in terms of their ability to satisfy a capability. In order to test this hypothesis, a novel process for creating representative functional networks of large-scale system architectures was developed. The process, named the Digraph Modeling for Architectures (DiMA), was tested by comparing its results to those of complex constructive simulations. Results indicate that if the inputs assigned to DiMA are correct (in the tests they were based on time-averaged data obtained from the ABM), DiMA is able to identify which of any two

Distributed and decentralized control architectures for converter-interfaced microgrids

DEFF Research Database (Denmark)

Dragicevic, Tomislav; Wu, Dan; Shafiee, Qobad

2017-01-01

This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods and info......This paper gives a summary on recently available technologies for decentralized and distributed control of microgrids. They can be classified into two general categories: 1) power line communication based architectures and 2) multi-agent based architectures. The essential control methods...... and information sharing algorithms applied in these architectures are reviewed and examined in a hierarchical manner, in order to point out benefits they will bring to future microgrid applications. The paper is concluded with a summary on existing methods and a discussion on future development trends....

ECONOMY AND CULTURE IN TRANSITIONS: A COMPARATIVE STUDY OF TWO ARCHITECTURAL HERITAGE SITES OF BAZARS AND HANS OF BURSA AND DHAKA

Directory of Open Access Journals (Sweden)

Tasleem Shakur

2013-11-01

Full Text Available Chawkbazar in Dhaka and Covered Bazaar in Bursa are two unique examples showing the contradiction among the traditional and the contemporary life-styles and their reflections on space uses and architecture. The first example in Dhaka is one of the prime icons of Mughal architecture in Bangladesh, whereas the second one in Bursa is the first example of the typical nucleus of traditional Ottoman city. Based on these two case studies in Dhaka (Bangladesh and Bursa (Turkey, this paper attempts to illustrate how the emerging cultures and spaces are continuously being either negotiated or contested with their adjacent historic sites (Shakur, 2005. This comparative research between two similar historical sites (Mughal and Ottoman but miles apart geographically is intended to understand the commonalities in its economic, social, cultural aspects through its transformation from the historic to the contemporary period. It highlights the socio-economic and cultural transformation and its implications for future conservation and development.

The Politics of Governance Architectures

DEFF Research Database (Denmark)

Borrás, Susana; Radaelli, Claudio M.

2011-01-01

Governance architectures are strategic and long-term institutional arrangements of international organizations exhibiting three features; namely, they address strategic and long-term problems in a holistic manner, they set substantive output-oriented goals, and they are implemented through...... not being identified as an object of study on its own right. We define the Lisbon Strategy as a case of governance architecture, raising questions about its creation, evolution and impact at the national level. We tackle these questions by drawing on institutional theories about emergence and change...

Accuracy Test of Software Architecture Compliance Checking Tools – Test Instruction

NARCIS (Netherlands)

Pruijt, Leo; van der Werf, J.M.E.M.|info:eu-repo/dai/nl/36950674X; Brinkkemper., Sjaak|info:eu-repo/dai/nl/07500707X

2015-01-01

Software Architecture Compliance Checking (SACC) is an approach to verify conformance of implemented program code to high-level models of architectural design. Static SACC focuses on the modular software architecture and on the existence of rule violating dependencies between modules. Accurate tool

CVISN operational and architectural compatibility handbook (COACH). Part 1, Operational concept and top-level design checklists

Science.gov (United States)

1999-04-22

The CVISN Operational and Architectural Compatibility Handbook (COACH) provides a comprehensive checklist of what is required to conform with the Commercial Vehicle Information Systems and Networks (CVISN) operational concepts and architecture. It is...

A Review on the Concepts of Traditional Architecture by Mulla Sadra’s Al-Hikmat Al-Mota'alie

Directory of Open Access Journals (Sweden)

Zeinab Soleimani Sheijani

2017-12-01

Full Text Available Paying little attention to the roots of today's architecture has departed the contemporary architecture from its conceptual origins. However, the single application of traditional architecture principles does not fulfill the demands of today's life. Although by peering into the traditional Iranian architecture, principles and specific ideas implicit in the Islamic wisdom of Iran are revealed. In addition to maintaining the values of traditional architecture, a new approach to architectural design can also be achieved by recognizing and integrating these principles with the necessities of today's life. The article aims to answer whether it is possible to create a link between the traditional Iranian architecture concepts and the principles of contemporary rational architecture, similar to what Mulla Sadra, the great Persian philosopher, created between the Iranian ancient wisdom and al-Hikmat al-Masha which was solely a rational philosophy. To achieve the mentioned aim, first Mulla Sadra's intellectual structure has been studied, after modeling al-Hikmat al-Mota'alie. Then the traditional architecture has been analyzed in order to recognize its being (al-Wojud and essence (al-Mahiyat. The priority of being has been introduced in the next step, followed by levels of being. The next pace was to discuss the structure of Mulla Sadra's thinking method in architecture. The results of study indicate that the process of communication between ancient wisdom and al-Hikmat al-Mashaexplained by Sadra can be classified in two phases, cognizing and integrating. In the stage of integration Sadra used rational reasoning to prove the issues that have been obtained through intuition and the same trend can be applied in architecture. The intuitive aspects of traditional architecture can also be presented within the framework of today's rationalist architecture in two steps, including cognizing and integrating.

Architecture in the Islamic Civilization: Muslim Building or Islamic Architecture

OpenAIRE

Yassin, Ayat Ali; Utaberta, Dr. Nangkula

2012-01-01

The main problem of the theory in the arena of islamic architecture is affected by some of its Westernthoughts, and stereotyping the islamic architecture according to Western thoughts; this leads to the breakdownof the foundations in the islamic architecture. It is a myth that islamic architecture is subjected to theinfluence from foreign architectures. This paper will highlight the dialectical concept of islamic architecture ormuslim buildings and the areas of recognition in islamic architec...

A Declarative Approach to Architectural Reflection

DEFF Research Database (Denmark)

Ingstrup, Mads; Hansen, Klaus Marius

2005-01-01

which both creates runtime models of specific distributed architectures and allow for evaluation of AQL queries on these models. We illustrate the viability of the approach in two particular applications of such a model: constraint checking relative to an architectural style, and reasoning about certain......Recent research shows runtime architectural reflection is instrumental in, for instance, building adaptive and flexible systems or checking correspondence between design and implementation. Moreover, experience with computational reflection in various branches of computer science shows...... that the interface through which the meta-information of the running system is accessed, and possibly modified, lies at the heart of designing reflective systems. This paper proposes that such an interface should be like a database: accessed through queries expressed using the concepts with which architecture...

Evolutionary design assistants for architecture

Directory of Open Access Journals (Sweden)

N. Onur Sönmez

2015-04-01

Full Text Available In its parallel pursuit of an increased competitivity for design offices and more pleasurable and easier workflows for designers, artificial design intelligence is a technical, intellectual, and political challenge. While human-machine cooperation has become commonplace through Computer Aided Design (CAD tools, a more improved collaboration and better support appear possible only through an endeavor into a kind of artificial design intelligence, which is more sensitive to the human perception of affairs. Considered as part of the broader Computational Design studies, the research program of this quest can be called Artificial / Autonomous / Automated Design (AD. The current available level of Artificial Intelligence (AI for design is limited and a viable aim for current AD would be to develop design assistants that are capable of producing drafts for various design tasks. Thus, the overall aim of this thesis is the development of approaches, techniques, and tools towards artificial design assistants that offer a capability for generating drafts for sub-tasks within design processes. The main technology explored for this aim is Evolutionary Computation (EC, and the target design domain is architecture. The two connected research questions of the study concern, first, the investigation of the ways to develop an architectural design assistant, and secondly, the utilization of EC for the development of such assistants. While developing approaches, techniques, and computational tools for such an assistant, the study also carries out a broad theoretical investigation into the main problems, challenges, and requirements towards such assistants on a rather overall level. Therefore, the research is shaped as a parallel investigation of three main threads interwoven along several levels, moving from a more general level to specific applications. The three research threads comprise, first, theoretical discussions and speculations with regard to both

Proactive Modeling of Market, Product and Production Architectures

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hansen, Christian Lindschou; Hvam, Lars

2011-01-01

This paper presents an operational model that allows description of market, products and production architectures. The main feature of this model is the ability to describe both structural and functional aspect of architectures. The structural aspect is an answer to the question: What constitutes...... the architecture, e.g. standard designs, design units and interfaces? The functional aspect is an answer to the question: What is the behaviour or the architecture, what is it able to do, i.e. which products at which performance levels can be derived from the architecture? Among the most important benefits...... of this model is the explicit ability to describe what the architecture is prepared for, and what it is not prepared for - concerning development of future derivative products. The model has been applied in a large scale global product development project. Among the most important benefits is contribution to...

Two zeolite-type frameworks in one metal-organic framework with Zn24 @Zn104 cube-in-sodalite architecture.

Science.gov (United States)

Bu, Fei; Lin, Qipu; Zhai, Quanguo; Wang, Le; Wu, Tao; Zheng, Shou-Tian; Bu, Xianhui; Feng, Pingyun

2012-08-20

Two in one: A metal-organic framework obtained from three different inorganic building blocks (tetrameric Zn(4) O, trimeric Zn(3) OH, and monomeric Zn) posseses a nested cage-in-cage and framework-in-framework architecture. 24 Zn(4) O tetramers and eight Zn monomers form a sodalite cage into which a cubic cage made from eight Zn(3) (OH) trimers is nestled. Eight monomeric Zn(2+) centers interconnect these two cages. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Application of Tessellation in Architectural Geometry Design

Science.gov (United States)

Chang, Wei

2018-06-01

Tessellation plays a significant role in architectural geometry design, which is widely used both through history of architecture and in modern architectural design with the help of computer technology. Tessellation has been found since the birth of civilization. In terms of dimensions, there are two- dimensional tessellations and three-dimensional tessellations; in terms of symmetry, there are periodic tessellations and aperiodic tessellations. Besides, some special types of tessellations such as Voronoi Tessellation and Delaunay Triangles are also included. Both Geometry and Crystallography, the latter of which is the basic theory of three-dimensional tessellations, need to be studied. In history, tessellation was applied into skins or decorations in architecture. The development of Computer technology enables tessellation to be more powerful, as seen in surface control, surface display and structure design, etc. Therefore, research on the application of tessellation in architectural geometry design is of great necessity in architecture studies.

History through Art and Architecture: Ancient Greek Architecture [and] Ancient Greek Sculpture. Teacher's Manual.

Science.gov (United States)

Campbell, Ann

This document consists of two teaching manuals designed to accompany a commercially-available "multicultural, interdisciplinary video program," consisting of four still videotape programs (72 minutes, 226 frames), one teaching poster, and these two manuals. "Teacher's Manual: Ancient Greek Architecture" covers: "Ancient…

A non-destructive crossbar architecture of multi-level memory-based resistor

Science.gov (United States)

Sahebkarkhorasani, Seyedmorteza

Nowadays, researchers are trying to shrink the memory cell in order to increase the capacity of the memory system and reduce the hardware costs. In recent years, there has been a revolution in electronics by using fundamentals of physics to build a new memory for computer application in order to increase the capacity and decrease the power consumption. Increasing the capacity of the memory causes a growth in the chip area. From 1971 to 2012 semiconductor manufacturing process improved from 6mum to 22 mum. In May 2008, S.Williams stated that "it is time to stop shrinking". In his paper, he declared that the process of shrinking memory element has recently become very slow and it is time to use another alternative in order to create memory elements [9]. In this project, we present a new design of a memory array using the new element named Memristor [3]. Memristor is a two-terminal passive electrical element that relates the charge and magnetic flux to each other. The device remained unknown since 1971 when it was discovered by Chua and introduced as the fourth fundamental passive element like capacitor, inductor and resistor [3]. Memristor has a dynamic resistance and it can retain its previous value even after disconnecting the power supply. Due to this interesting behavior of the Memristor, it can be a good replacement for all of the Non-Volatile Memories (NVMs) in the near future. Combination of this newly introduced element with the nanowire crossbar architecture would be a great structure which is called Crossbar Memristor. Some frameworks have recently been introduced in literature that utilized Memristor crossbar array, but there are many challenges to implement the Memristor crossbar array due to fabrication and device limitations. In this work, we proposed a simple design of Memristor crossbar array architecture which uses input feedback in order to preserve its data after each read operation.

A data acquisition architecture for the SSC

International Nuclear Information System (INIS)

Partridge, R.

1990-01-01

An SSC data acquisition architecture applicable to high-p T detectors is described. The architecture is based upon a small set of design principles that were chosen to simplify communication between data acquisition elements while providing the required level of flexibility and performance. The architecture features an integrated system for data collection, event building, and communication with a large processing farm. The interface to the front end electronics system is also discussed. A set of design parameters is given for a data acquisition system that should meet the needs of high-p T detectors at the SSC

Fundamentals of computer architecture and design

CERN Document Server

Bindal, Ahmet

2017-01-01

This textbook provides semester-length coverage of computer architecture and design, providing a strong foundation for students to understand modern computer system architecture and to apply these insights and principles to future computer designs.  It is based on the author’s decades of industrial experience with computer architecture and design, as well as with teaching students focused on pursuing careers in computer engineering.  Unlike a number of existing textbooks for this course, this one focuses not only on CPU architecture, but also covers in great detail in system buses, peripherals and memories.This book teaches every element in a computing system in two steps.  First, it introduces the functionality of each topic (and subtopics) and then goes into “from-scratch design” of a particular digital block from its architectural specifications using timing diagrams.  The author describes how the data-path of a certain digital block is generated using timin g diagrams, a method which most textbo...

Software architecture analysis tool : software architecture metrics collection

NARCIS (Netherlands)

Muskens, J.; Chaudron, M.R.V.; Westgeest, R.

2002-01-01

The Software Engineering discipline lacks the ability to evaluate software architectures. Here we describe a tool for software architecture analysis that is based on metrics. Metrics can be used to detect possible problems and bottlenecks in software architectures. Even though metrics do not give a

The application of diagrams in architectural design

Directory of Open Access Journals (Sweden)

Dulić Olivera

2014-01-01

Full Text Available Diagrams in architecture represent the visualization of the thinking process, or selective abstraction of concepts or ideas translated into the form of drawings. In addition, they provide insight into the way of thinking about and in architecture, thus creating a balance between the visual and the conceptual. The subject of research presented in this paper are diagrams as a specific kind of architectural representation, and possibilities and importance of their application in the design process. Diagrams are almost old as architecture itself, and they are an element of some of the most important studies of architecture during all periods of history - which results in a large number of different definitions of diagrams, but also very different conceptualizations of their features, functions and applications. The diagrams become part of contemporary architectural discourse during the eighties and nineties of the twentieth century, especially through the work of architects like Bernard Tschumi, Peter Eisenman, Rem Koolhaas, SANAA and others. The use of diagrams in the design process allows unification of some of the essential aspects of the profession: architectural representation and design process, as well as the question of the concept of architectural and urban design at a time of rapid changes at all levels of contemporary society. The aim of the research is the analysis of the diagram as a specific medium for processing large amounts of information that the architect should consider and incorporate into the architectural work. On that basis, it is assumed that an architectural diagram allows the creator the identification and analysis of specific elements or ideas of physical form, thereby constantly maintaining concept of the integrity of the architectural work.

Proposed hardware architectures of particle filter for object tracking

Science.gov (United States)

Abd El-Halym, Howida A.; Mahmoud, Imbaby Ismail; Habib, SED

2012-12-01

In this article, efficient hardware architectures for particle filter (PF) are presented. We propose three different architectures for Sequential Importance Resampling Filter (SIRF) implementation. The first architecture is a two-step sequential PF machine, where particle sampling, weight, and output calculations are carried out in parallel during the first step followed by sequential resampling in the second step. For the weight computation step, a piecewise linear function is used instead of the classical exponential function. This decreases the complexity of the architecture without degrading the results. The second architecture speeds up the resampling step via a parallel, rather than a serial, architecture. This second architecture targets a balance between hardware resources and the speed of operation. The third architecture implements the SIRF as a distributed PF composed of several processing elements and central unit. All the proposed architectures are captured using VHDL synthesized using Xilinx environment, and verified using the ModelSim simulator. Synthesis results confirmed the resource reduction and speed up advantages of our architectures.

Paper relief architecture

NARCIS (Netherlands)

Latka, J.F.

2014-01-01

The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which

Future internet architecture and cloud ecosystem: A survey

Science.gov (United States)

Wan, Man; Yin, Shiqun

2018-04-01

The Internet has gradually become a social infrastructure, the existing TCP/IP architecture faces many challenges. So future Internet architecture become hot research. This paper introduces two ways of idea about the future research of Internet structure system, probes into the future Internet architecture and the environment of cloud ecosystem. Finally, we focuses the related research, and discuss basic principles and problems of OpenStack.

Building Paradigms: Major Transformations in School Architecture (1798-2009)

Science.gov (United States)

Gislason, Neil

2009-01-01

This article provides an historical overview of significant trends in school architecture from 1798 to the present. I divide the history of school architecture into two major phases. The first period falls between 1798 and 1921: the modern graded classroom emerged as a standard architectural feature during this period. The second period, which…

Neural codes of seeing architectural styles

OpenAIRE

Choo, Heeyoung; Nasar, Jack L.; Nikrahei, Bardia; Walther, Dirk B.

2017-01-01

Images of iconic buildings, such as the CN Tower, instantly transport us to specific places, such as Toronto. Despite the substantial impact of architectural design on people′s visual experience of built environments, we know little about its neural representation in the human brain. In the present study, we have found patterns of neural activity associated with specific architectural styles in several high-level visual brain regions, but not in primary visual cortex (V1). This finding sugges...

Design of low-power coarse-grained reconfigurable architectures

CERN Document Server

Kim, Yoonjin

2010-01-01

Coarse-grained reconfigurable architecture (CGRA) has emerged as a solution for flexible, application-specific optimization of embedded systems. Helping you understand the issues involved in designing and constructing embedded systems, Design of Low-Power Coarse-Grained Reconfigurable Architectures offers new frameworks for optimizing the architecture of components in embedded systems in order to decrease area and save power. Real application benchmarks and gate-level simulations substantiate these frameworks.The first half of the book explains how to reduce power in the configuration cache. T

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

Architecture and memory

Directory of Open Access Journals (Sweden)

Eneida de Almeida

2015-12-01

Full Text Available This paper investigates the links between architecture design and restoration, considering the blurry frontier that distinguishes this actions. The study holds in two contemporary architects performance: Lina Bo Bardi (1914-1992 and Aldo Rossi (1931-1997. The analyses of the concrete production, presented here by a work of each architecture – Sesc Pompeia and the Teatro Del Mondo – is based on the ability of reflection on the role of the memory in architecture: not only the memory in the buildings and urban fabrics materiality, but also the memory as an active instrument inside the mental processes adopted by the projects authors. Resorting to architects writings as well as authors who analyses this interventions, they seek to reconstitute the design development path, recognizing the strategy that reinterprets past experiences in order to overcome the traditional contraposition between “old” and “new”, tutorship and innovation.

Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

Mexican Art and Architecture Databases: Needs, Achievements, Problems.

Science.gov (United States)

Barberena, Elsa

At the international level, a lack of diffusion of Mexican art and architecture in indexes and abstracts has been detected. Reasons for this could be lack of continuity in publications, the use of the Spanish language, lack of interest in Mexican art and architecture, and sporadic financial resources. Nevertheless, even though conditions are not…

On the Architectural Engineering Competences in Architectural Design

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning

2007-01-01

In 1997 a new education in Architecture & Design at Department of Architecture and Design, Aalborg University was started with 50 students. During the recent years this number has increased to approximately 100 new students each year, i.e. approximately 500 students are following the 3 years...... bachelor (BSc) and the 2 years master (MSc) programme. The first 5 semesters are common for all students followed by 5 semesters with specialization into Architectural Design, Urban Design, Industrial Design or Digital Design. The present paper gives a short summary of the architectural engineering...

VIRTUAL AND PHYSICAL ARCHITECTURAL ATMOSPHERE

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars

2016-01-01

This study, of the similarities between the perception of architectural space experienced in physical space conditions and in Virtual Reality, intents to clarify to what extend subjective and objective attributes of architectural space can be conveyed through a direct use of Building Information...... Models in Virtual Reality. 60 test persons experienced a specific test space as either a physical or a virtual environment, while data from their experiences was collected through a quantitative/qualitative questionnaire. The overall conclusion, from this phase of the study, is that even a simple BIM...... model through HMD VR can convey rather precise information about both subjective and objective experiences of architectural space, ambience and atmosphere. Next phase of the study will include eye-tracking data from the two scenarios....

TEACHING CAD PROGRAMMING TO ARCHITECTURE STUDENTS

Directory of Open Access Journals (Sweden)

Maria Gabriela Caffarena CELANI

2008-11-01

Full Text Available The objective of this paper is to discuss the relevance of including the discipline of computer programming in the architectural curriculum. To do so I start by explaining how computer programming has been applied in other educational contexts with pedagogical success, describing Seymour Papert's principles. After that, I summarize the historical development of CAD and provide three historical examples of educational applications of computer programming in architecture, followed by a contemporary case that I find of particular relevance. Next, I propose a methodology for teaching programming for architects that aims at improving the quality of designs by making their concepts more explicit. This methodology is based on my own experience teaching computer programming for architecture students at undergraduate and graduate levels at the State University of Campinas, Brazil. The paper ends with a discussion about the role of programming nowadays, when most CAD software are user-friendly and do not require any knowledge of programming for improving performance. I conclude that the introduction of programming in the CAD curriculum within a proper conceptual framework may transform the concept of architectural education. Key-words: Computer programming; computer-aided design; architectural education.

Biometric technology authentication, biocryptography, and cloud-based architecture

CERN Document Server

Das, Ravi

2014-01-01

Most biometric books are either extraordinarily technical for technophiles or extremely elementary for the lay person. Striking a balance between the two, Biometric Technology: Authentication, Biocryptography, and Cloud-Based Architecture is ideal for business, IT, or security managers that are faced with the task of making purchasing, migration, or adoption decisions. It brings biometrics down to an understandable level, so that you can immediately begin to implement the concepts discussed.Exploring the technological and social implications of widespread biometric use, the book considers the

Art and Architectural Space

DEFF Research Database (Denmark)

Unterrainer, Walter

2014-01-01

the number of museums went up from 300 by 1980 to estimated 3000 museums by 2015. In urban discourses, new museums and buildings for art have been considered as drivers for ´cultural sustainability´ of cities. The notion is diffuse and the reality is more an economic centred ´city branding´ to help...... the promotion of tourism. What surprises: in many cities, the buildings for art are better known and more published and discussed than the art they accommodate. A lot of them are considered as art objects. This raises two questions: How much is architecture itself a form of arts? (in Western architecture...... historically considered even the mother of all arts) - but more relevant: what are appropriate architectural spaces for presenting, exhibiting, contemplating, reflecting, meditating, discussing, enjoying, dissenting, debating creations of art. Simplified, this is a question about the relation between package...

Architecture design of the application software for the low-level RF control system of the free-electron laser at Hamburg

International Nuclear Information System (INIS)

Geng, Z.; Ayvazyan, V.; Simrock, S.

2012-01-01

The superconducting linear accelerator of the Free-Electron Laser at Hamburg (FLASH) provides high performance electron beams to the lasing system to generate synchrotron radiation to various users. The Low-Level RF (LLRF) system is used to maintain the beam stabilities by stabilizing the RF field in the superconducting cavities with feedback and feed forward algorithms. The LLRF applications are sets of software to perform RF system model identification, control parameters optimization, exception detection and handling, so as to improve the precision, robustness and operability of the LLRF system. In order to implement the LLRF applications in the hardware with multiple distributed processors, an optimized architecture of the software is required for good understandability, maintainability and extendibility. This paper presents the design of the LLRF application software architecture based on the software engineering approach for FLASH. (authors)

Coherent Architecture Development as a Basis for Technology Development

DEFF Research Database (Denmark)

Ravn, Poul Martin

coherent architectures in a technology context as a basis for identification of critical development areas, this research has been focused around the following three areas: 1. Product architecture instances for prototypes testing novel technology. 2. Product architecture definition for a sub-system based......The subject of this PhD thesis is architecture-centered design. It elaborates especially on two specific areas: the coherence in architectures in a technology development context and the identification of critical development areas via property-based reasoning, based on an understanding of cette...... coherence. Despite the acceptance and results presented in multiple studies from the application of architectures, the research on architecture work in a technology development context is limited. Technologies are often developed and represented in the form of product sub-systems that are made available...

Security for service oriented architectures

CERN Document Server

Williams, Walter

2014-01-01

Although integrating security into the design of applications has proven to deliver resilient products, there are few books available that provide guidance on how to incorporate security into the design of an application. Filling this need, Security for Service Oriented Architectures examines both application and security architectures and illustrates the relationship between the two. Supplying authoritative guidance on how to design distributed and resilient applications, the book provides an overview of the various standards that service oriented and distributed applications leverage, includ

An Intelligent Agent based Architecture for Visual Data Mining

OpenAIRE

Hamdi Ellouzi; Hela Ltifi; Mounir Ben Ayed

2016-01-01

the aim of this paper is to present an intelligent architecture of Decision Support System (DSS) based on visual data mining. This architecture applies the multi-agent technology to facilitate the design and development of DSS in complex and dynamic environment. Multi-Agent Systems add a high level of abstraction. To validate the proposed architecture, it is implemented to develop a distributed visual data mining based DSS to predict nosocomial infectionsoccurrence in intensive care units. Th...

Reading of the Architectural Identity via Cinema

Directory of Open Access Journals (Sweden)

Havva Alkan Bala

2015-07-01

Full Text Available This study focused on the identity and proficiency of the profession of architecture via characters of “architect”, “student of architecture” and “having ambition to become an architect” in various films. Conclusions have been drawn about the professional applications and architectural life from the cinematographic level regarding the architect characters and their jobs via the seven films and a total of eleven different architect characters studied. This study aims to revise, through the cinema, the questions of what does an architect do? How does an architect work? What are the tools that an architect uses? How does an architect create their works? What is the mental map of an architect like? In short, who is an architect? New conclusions have been drawn, via a total of eleven different characters of architects in seven films, about architects and architects’ job from the cinematographic level to Professional practiceand architectural life.

A Theoretical Approach to Norm Ecosystems: Two Adaptive Architectures of Indirect Reciprocity Show Different Paths to the Evolution of Cooperation

Directory of Open Access Journals (Sweden)

Satoshi Uchida

2018-02-01

Full Text Available Indirect reciprocity is one of the basic mechanisms to sustain mutual cooperation, by which beneficial acts are returned, not by the recipient, but by third parties. This mechanism relies on the ability of individuals to know the past actions of others, and to assess those actions. There are many different systems of assessing others, which can be interpreted as rudimentary social norms (i.e., views on what is “good” or “bad”. In this paper, impacts of different adaptive architectures, i.e., ways for individuals to adapt to environments, on indirect reciprocity are investigated. We examine two representative architectures: one based on replicator dynamics and the other on genetic algorithm. Different from the replicator dynamics, the genetic algorithm requires describing the mixture of all possible norms in the norm space under consideration. Therefore, we also propose an analytic method to study norm ecosystems in which all possible second order social norms potentially exist and compete. The analysis reveals that the different adaptive architectures show different paths to the evolution of cooperation. Especially we find that so called Stern-Judging, one of the best studied norms in the literature, exhibits distinct behaviors in both architectures. On one hand, in the replicator dynamics, Stern-Judging remains alive and gets a majority steadily when the population reaches a cooperative state. On the other hand, in the genetic algorithm, it gets a majority only temporarily and becomes extinct in the end.

A Theoretical Approach to Norm Ecosystems: Two Adaptive Architectures of Indirect Reciprocity Show Different Paths to the Evolution of Cooperation

Science.gov (United States)

Uchida, Satoshi; Yamamoto, Hitoshi; Okada, Isamu; Sasaki, Tatsuya

2018-02-01

Indirect reciprocity is one of the basic mechanisms to sustain mutual cooperation, by which beneficial acts are returned, not by the recipient, but by third parties. This mechanism relies on the ability of individuals to know the past actions of others, and to assess those actions. There are many different systems of assessing others, which can be interpreted as rudimentary social norms (i.e., views on what is “good” or “bad”). In this paper, impacts of different adaptive architectures, i.e., ways for individuals to adapt to environments, on indirect reciprocity are investigated. We examine two representative architectures: one based on replicator dynamics and the other on genetic algorithm. Different from the replicator dynamics, the genetic algorithm requires describing the mixture of all possible norms in the norm space under consideration. Therefore, we also propose an analytic method to study norm ecosystems in which all possible second order social norms potentially exist and compete. The analysis reveals that the different adaptive architectures show different paths to the evolution of cooperation. Especially we find that so called Stern-Judging, one of the best studied norms in the literature, exhibits distinct behaviors in both architectures. On one hand, in the replicator dynamics, Stern-Judging remains alive and gets a majority steadily when the population reaches a cooperative state. On the other hand, in the genetic algorithm, it gets a majority only temporarily and becomes extinct in the end.

Software Architecture Coupling Metric for Assessing Operational Responsiveness of Trading Systems

Directory of Open Access Journals (Sweden)

Claudiu VINTE

2012-01-01

Full Text Available The empirical observation that motivates our research relies on the difficulty to assess the performance of a trading architecture beyond a few synthetic indicators like response time, system latency, availability or volume capacity. Trading systems involve complex software architectures of distributed resources. However, in the context of a large brokerage firm, which offers a global coverage from both, market and client perspectives, the term distributed gains a critical significance indeed. Offering a low latency ordering system by nowadays standards is relatively easily achievable, but integrating it in a flexible manner within the broader information system architecture of a broker/dealer requires operational aspects to be factored in. We propose a metric for measuring the coupling level within software architecture, and employ it to identify architectural designs that can offer a higher level of operational responsiveness, which ultimately would raise the overall real-world performance of a trading system.

How organisation of architecture documentation affects architectural knowledge retrieval

NARCIS (Netherlands)

de Graaf, K.A.; Liang, P.; Tang, A.; Vliet, J.C.

A common approach to software architecture documentation in industry projects is the use of file-based documents. This approach offers a single-dimensional arrangement of the architectural knowledge. Knowledge retrieval from file-based architecture documentation is efficient if the organisation of

FTA Transit Intelligent Transportation System Architecture Consistency Review - 2010 Update

Science.gov (United States)

2011-07-01

This report provides an assessment on the level of compliance among the FTA grantees with the National ITS Architecture Policy, specifically examining three items: 1. The use and maintenance of Regional ITS Architectures by transit agencies to plan, ...

Architecture of the Product State Model Environment

DEFF Research Database (Denmark)

Holm Larsen, Michael; Lynggaard, Hans Jørgen B.

2003-01-01

on thedevelopment activities of the PSM architecture. An example discusses how to handle product relatedinformation on the shop floor in a manufacturing company and focuses on how dynamically updatedproduct data can improve control of production activities. This prototype example of welding a jointbetween two steel...... plates serves as proof of concept for the PSM architecture....

Distributed behavior-based control architecture for a wall climbing robot

International Nuclear Information System (INIS)

Nadir Ould Khessal; Shamsudin H.M. Amin . nadir.ok@ieee.org

1999-01-01

In the past two decades, Behavior-based AI (Artificial Intelligence) has emerged as a new approach in designing mobile robot control architecture. It stresses on the issues of reactivity, concurrency and real-time control. In this paper we propose a new approach in designing robust intelligent controllers for mobile robot platforms. The Behaviour-based paradigm implemented in a multiprocessing firmware architecture will further enhance parallelism present in the subsumption paradigm itself and increased real-timeness. The paper summarises research done to design a four-legged wall climbing robot. The emphasis will be on the control architecture of the robot based on the Behavior -based paradigm. The robot control architecture is made up of two layers, the locomotion layer and the gait controller layer. The two layers are implemented on a Vesta 68332 processor board running the Behaviour-based kernel, The software is developed using the L programming language, introduced by IS Robotics. The Behaviour-based paradigm is outlined and contrasted with the classical Knowledge-based approach. A description of the distributed architecture is presented followed by a presentation of the Behaviour-based agents for the two layers. (author)

Microgrid cyber security reference architecture.

Energy Technology Data Exchange (ETDEWEB)

Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

2013-07-01

This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

An area efficient readout architecture for photon counting color imaging

International Nuclear Information System (INIS)

Lundgren, Jan; O'Nils, Mattias; Oelmann, Bengt; Norlin, Boerje; Abdalla, Suliman

2007-01-01

The introduction of several energy levels, namely color imaging, in photon counting X-ray image sensors is a trade-off between circuit complexity and spatial resolution. In this paper, we propose a pixel architecture that has full resolution for the intensity and uses sub-sampling for the energy spectrum. The results show that this sub-sampling pixel architecture produces images with an image quality which is, on average, 2.4 dB (PSNR) higher than those for a single energy range architecture and with half the circuit complexity of that for a full sampling architecture

Computational Strategies for the Architectural Design of Bending Active Structures

DEFF Research Database (Denmark)

Tamke, Martin; Nicholas, Paul

2013-01-01

Active bending introduces a new level of integration into the design of architectural structures, and opens up new complexities for the architectural design process. In particular, the introduction of material variation reconfigures the design space. Through the precise specification...

Patterns and Practices for Future Architectures

Science.gov (United States)

2014-08-01

Proposed Graph Analytics (right) Library Architectures 30 Figure 21: SGI UV 100 (CPU-Only) Configuration 33 Figure 22: SGI C2108 2U Server with Two...the CombBLAS library [Buluç 2011, 2014]. Figure 20: Comparison of Linear Algebra (left) and the Proposed Graph Analytics (right) Library ... Architectures The libraries (shaded) provide an interface/abstraction layer between the hardware and application layers. Within the library design is an

Design requirements of communication architecture of SMART safety system

International Nuclear Information System (INIS)

Park, H. Y.; Kim, D. H.; Sin, Y. C.; Lee, J. Y.

2001-01-01

To develop the communication network architecture of safety system of SMART, the evaluation elements for reliability and performance factors are extracted from commercial networks and classified the required-level by importance. A predictable determinacy, status and fixed based architecture, separation and isolation from other systems, high reliability, verification and validation are introduced as the essential requirements of safety system communication network. Based on the suggested requirements, optical cable, star topology, synchronous transmission, point-to-point physical link, connection-oriented logical link, MAC (medium access control) with fixed allocation are selected as the design elements. The proposed architecture will be applied as basic communication network architecture of SMART safety system

The NASA Integrated Information Technology Architecture

Science.gov (United States)

Baldridge, Tim

1997-01-01

This document defines an Information Technology Architecture for the National Aeronautics and Space Administration (NASA), where Information Technology (IT) refers to the hardware, software, standards, protocols and processes that enable the creation, manipulation, storage, organization and sharing of information. An architecture provides an itemization and definition of these IT structures, a view of the relationship of the structures to each other and, most importantly, an accessible view of the whole. It is a fundamental assumption of this document that a useful, interoperable and affordable IT environment is key to the execution of the core NASA scientific and project competencies and business practices. This Architecture represents the highest level system design and guideline for NASA IT related activities and has been created on the authority of the NASA Chief Information Officer (CIO) and will be maintained under the auspices of that office. It addresses all aspects of general purpose, research, administrative and scientific computing and networking throughout the NASA Agency and is applicable to all NASA administrative offices, projects, field centers and remote sites. Through the establishment of five Objectives and six Principles this Architecture provides a blueprint for all NASA IT service providers: civil service, contractor and outsourcer. The most significant of the Objectives and Principles are the commitment to customer-driven IT implementations and the commitment to a simpler, cost-efficient, standards-based, modular IT infrastructure. In order to ensure that the Architecture is presented and defined in the context of the mission, project and business goals of NASA, this Architecture consists of four layers in which each subsequent layer builds on the previous layer. They are: 1) the Business Architecture: the operational functions of the business, or Enterprise, 2) the Systems Architecture: the specific Enterprise activities within the context

Capital Architecture: Situating symbolism parallel to architectural methods and technology

Science.gov (United States)

Daoud, Bassam

Capital Architecture is a symbol of a nation's global presence and the cultural and social focal point of its inhabitants. Since the advent of High-Modernism in Western cities, and subsequently decolonised capitals, civic architecture no longer seems to be strictly grounded in the philosophy that national buildings shape the legacy of government and the way a nation is regarded through its built environment. Amidst an exceedingly globalized architectural practice and with the growing concern of key heritage foundations over the shortcomings of international modernism in representing its immediate socio-cultural context, the contextualization of public architecture within its sociological, cultural and economic framework in capital cities became the key denominator of this thesis. Civic architecture in capital cities is essential to confront the challenges of symbolizing a nation and demonstrating the legitimacy of the government'. In today's dominantly secular Western societies, governmental architecture, especially where the seat of political power lies, is the ultimate form of architectural expression in conveying a sense of identity and underlining a nation's status. Departing with these convictions, this thesis investigates the embodied symbolic power, the representative capacity, and the inherent permanence in contemporary architecture, and in its modes of production. Through a vast study on Modern architectural ideals and heritage -- in parallel to methodologies -- the thesis stimulates the future of large scale governmental building practices and aims to identify and index the key constituents that may respond to the lack representation in civic architecture in capital cities.

Critical formalism or digital biomorphology. The contemporary architecture formal dilema

Directory of Open Access Journals (Sweden)

Beatriz Villanueva Cajide

2018-05-01

Full Text Available With the dawn of digital media the architecture’s formal possibilities reached a level unknown before. The Guggenheim Museo branch in Bilbao appears in 1993 as the materialisation of the possibilities of the use of digital tools in architecture’s design, starting the development of a digital based architecture which currently has reached an exhaustion level that is evident in the repetition biomorphologic shapes emerged from the digital determinism to which some contemporary architectural practices have converged. While the digitalisation of the architectural process is irreversible and desirable, it is necessary to rethink the terms of this collaboration beyond the possibilities of the digital tools themselves. This article proposes to analyse seven texts written in the very moment when digitalisation became a real possibility, between Gehry’s conception of the Guggenheim Museum in 1992 and the Congress on Morphogenesis hold in the Architectural Association in 2004, in order to explore the possibility of reversing the process that has led to the formal exhaustion of digital architecture, from the acceptance of incorporating strategies coming from a contemporary critical formalism.

Software architecture evolution

DEFF Research Database (Denmark)

Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

2008-01-01

Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

Architectural design decisions

NARCIS (Netherlands)

Jansen, Antonius Gradus Johannes

2008-01-01

A software architecture can be considered as the collection of key decisions concerning the design of the software of a system. Knowledge about this design, i.e. architectural knowledge, is key for understanding a software architecture and thus the software itself. Architectural knowledge is mostly

A Review of Enterprise Architecture Use in Defence

Science.gov (United States)

2014-09-01

dictionary of terms; • architecture description language; • architectural information (pertaining both to specific projects and higher level...UNCLASSIFIED 59 Z39.19 2005 Monolingual Controlled Vocabularies, National Information Standards Organisation, Bethesda: NISO Press, 2005. BABOK 2009...togaf/ Z39.19 2005 ANSI/NISO Z39.19 – Guidelines for the Construction, Format, and Management of Monolingual Controlled Vocabularies, Bethesda: NISO

Video sensor architecture for surveillance applications.

Science.gov (United States)

Sánchez, Jordi; Benet, Ginés; Simó, José E

2012-01-01

This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software) in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

Video Sensor Architecture for Surveillance Applications

Directory of Open Access Journals (Sweden)

José E. Simó

2012-02-01

Full Text Available This paper introduces a flexible hardware and software architecture for a smart video sensor. This sensor has been applied in a video surveillance application where some of these video sensors are deployed, constituting the sensory nodes of a distributed surveillance system. In this system, a video sensor node processes images locally in order to extract objects of interest, and classify them. The sensor node reports the processing results to other nodes in the cloud (a user or higher level software in the form of an XML description. The hardware architecture of each sensor node has been developed using two DSP processors and an FPGA that controls, in a flexible way, the interconnection among processors and the image data flow. The developed node software is based on pluggable components and runs on a provided execution run-time. Some basic and application-specific software components have been developed, in particular: acquisition, segmentation, labeling, tracking, classification and feature extraction. Preliminary results demonstrate that the system can achieve up to 7.5 frames per second in the worst case, and the true positive rates in the classification of objects are better than 80%.

SecureCore Software Architecture: Trusted Path Application (TPA) Requirements

National Research Council Canada - National Science Library

Clark, Paul C; Irvine, Cynthia E; Levin, Timothy E; Nguyen, Thuy D; Vidas, Timothy M

2007-01-01

.... A high-level architecture is described to provide such features. In addition, a usage scenario is described for a potential use of the architecture, with emphasis on the trusted path, a non-spoofable user interface to the trusted components of the system. Detailed requirements for the trusted path are provided.

Minimalism in architecture: Architecture as a language of its identity

Directory of Open Access Journals (Sweden)

Vasilski Dragana

2012-01-01

Full Text Available Every architectural work is created on the principle that includes the meaning, and then this work is read like an artifact of the particular meaning. Resources by which the meaning is built primarily, susceptible to transformation, as well as routing of understanding (decoding messages carried by a work of architecture, are subject of semiotics and communication theories, which have played significant role for the architecture and the architect. Minimalism in architecture, as a paradigm of the XXI century architecture, means searching for essence located in the irreducible minimum. Inspired use of architectural units (archetypical elements, trough the fatasm of simplicity, assumes the primary responsibility for providing the object identity, because it participates in language formation and therefore in its reading. Volume is form by clean language that builds the expression of the fluid areas liberated of recharge needs. Reduced architectural language is appropriating to the age marked by electronic communications.

Real-Time 3D Face Acquisition Using Reconfigurable Hybrid Architecture

Directory of Open Access Journals (Sweden)

Mitéran Johel

2007-01-01

Full Text Available Acquiring 3D data of human face is a general problem which can be applied in face recognition, virtual reality, and many other applications. It can be solved using stereovision. This technique consists in acquiring data in three dimensions from two cameras. The aim is to implement an algorithmic chain which makes it possible to obtain a three-dimensional space from two two-dimensional spaces: two images coming from the two cameras. Several implementations have already been considered. We propose a new simple real-time implementation based on a hybrid architecture (FPGA-DSP, allowing to consider an embedded and reconfigurable processing. Then we show our method which provides depth map of face, dense and reliable, and which can be implemented on an embedded architecture. A various architecture study led us to a judicious choice allowing to obtain the desired result. The real-time data processing is implemented in an embedded architecture. We obtain a dense face disparity map, precise enough for considered applications (multimedia, virtual worlds, biometrics and using a reliable method.

Knowledge Management Practice in Two Australian Architecture-Engineering-Construction (AEC Companies

Directory of Open Access Journals (Sweden)

Patrick Zou

2012-11-01

Full Text Available Knowledge management (KM could be described as a management system that supports the creation, sharing and retrieving of valued information, expertise and insight within and across communities of people and related organizations using information and communication technologies and hence it is a combination of the effective application of information technlogy and management of human resources. KM is becoming a core competitive factor in construction operations. This paper presents the results of two case studies of KM practices in large AEC (architecture, engineering and construction companies through desk-top study and semi-structured interviews. The results indicate that implementing KM in AEC companies leads to competitive advantages and improved decision-making, problem solving and business performance. The results also indicateed that while technology plays an important role, top management commitment, total employee involvement, performance assessment and the culture of knowledge-learning and sharing must be considered when implementing KM. Therefore it is suggested that the implementation of KM should incorporate the company's vision, work processes, technology and culture, to improve the ability of knowledge creating, capturing, sharing, retrieving and ultimately, to improve the company's competitive advantage, decision making, problem solving and innovation.

Space-Time and Architecture

Science.gov (United States)

Field, F.; Goodbun, J.; Watson, V.

Architects have a role to play in interplanetary space that has barely yet been explored. The architectural community is largely unaware of this new territory, for which there is still no agreed method of practice. There is moreover a general confusion, in scientific and related fields, over what architects might actually do there today. Current extra-planetary designs generally fail to explore the dynamic and relational nature of space-time, and often reduce human habitation to a purely functional problem. This is compounded by a crisis over the representation (drawing) of space-time. The present work returns to first principles of architecture in order to realign them with current socio-economic and technological trends surrounding the space industry. What emerges is simultaneously the basis for an ecological space architecture, and the representational strategies necessary to draw it. We explore this approach through a work of design-based research that describes the construction of Ocean; a huge body of water formed by the collision of two asteroids at the Translunar Lagrange Point (L2), that would serve as a site for colonisation, and as a resource to fuel future missions. Ocean is an experimental model for extra-planetary space design and its representation, within the autonomous discipline of architecture.

TEACHING DESIGN AT THE LIMITS OF ARCHITECTURE

Directory of Open Access Journals (Sweden)

Nikos A. Salingaros

2010-07-01

Full Text Available Pre-industrial architects inherently knew the effectual dimension of design through its materiality, detail, and form. Until now, the intellectual dichotomy of human thinking held that mind and body were separate entities, drawing a distinction between reasoned thought and feeling. The early Greek philosophers distinguished between these two realms. Theories on beauty, the human aesthetic impulse, and design were divided along the objective and subjective lines for centuries. In more current architectural terms, the objective dimension of industry gave structure and perceived virtue to the modernist paradigm, while at the same time clearing the way (tabula rasa for the rampant subjectivity we now see in the idiosyncratic expressions of so many contemporary architects. By revealing the relationship between our physical and mental processes, neuroscience re-situates the debate on physical reality well outside the intellectual enterprise of aesthetically driven design. Clear measures can now be evidenced, documented, and applied to establish a new, more effective, and humanly engaging way to build. This new architecture draws upon those mechanisms of neuro-connectivity that help us to feel safe and secure.   From this knowledge we have developed a new model for building/rebuilding the world, called Intelligence-Based Design. Intelligence-Based Design is the purposeful manipulation of the built environment to engage humans in an essential manner through complex organized information. Intelligence-Based Theory evidences the direct neurological evaluations of surface, structure, pattern, texture, and form, etc., and maintains that our sense of well being is established through positive neuro-engagement with the physical world at the deepest level common to all people, i.e. “Innate Intelligence.” This paper describes a senior architectural design studio taught using the precepts of Intelligence-Based Design. We describe our methodology, and the

Comparison of digital mammography and digital breast tomosynthesis in the detection of architectural distortion.

Science.gov (United States)

Dibble, Elizabeth H; Lourenco, Ana P; Baird, Grayson L; Ward, Robert C; Maynard, A Stanley; Mainiero, Martha B

2018-01-01

To compare interobserver variability (IOV), reader confidence, and sensitivity/specificity in detecting architectural distortion (AD) on digital mammography (DM) versus digital breast tomosynthesis (DBT). This IRB-approved, HIPAA-compliant reader study used a counterbalanced experimental design. We searched radiology reports for AD on screening mammograms from 5 March 2012-27 November 2013. Cases were consensus-reviewed. Controls were selected from demographically matched non-AD examinations. Two radiologists and two fellows blinded to outcomes independently reviewed images from two patient groups in two sessions. Readers recorded presence/absence of AD and confidence level. Agreement and differences in confidence and sensitivity/specificity between DBT versus DM and attendings versus fellows were examined using weighted Kappa and generalised mixed modeling, respectively. There were 59 AD patients and 59 controls for 1,888 observations (59 × 2 (cases and controls) × 2 breasts × 2 imaging techniques × 4 readers). For all readers, agreement improved with DBT versus DM (0.61 vs. 0.37). Confidence was higher with DBT, p = .001. DBT achieved higher sensitivity (.59 vs. .32), p .90). DBT achieved higher positive likelihood ratio values, smaller negative likelihood ratio values, and larger ROC values. DBT decreases IOV, increases confidence, and improves sensitivity while maintaining high specificity in detecting AD. • Digital breast tomosynthesis decreases interobserver variability in the detection of architectural distortion. • Digital breast tomosynthesis increases reader confidence in the detection of architectural distortion. • Digital breast tomosynthesis improves sensitivity in the detection of architectural distortion.

Architectural Narratives

DEFF Research Database (Denmark)

Kiib, Hans

2010-01-01

a functional framework for these concepts, but tries increasingly to endow the main idea of the cultural project with a spatially aesthetic expression - a shift towards “experience architecture.” A great number of these projects typically recycle and reinterpret narratives related to historical buildings......In this essay, I focus on the combination of programs and the architecture of cultural projects that have emerged within the last few years. These projects are characterized as “hybrid cultural projects,” because they intend to combine experience with entertainment, play, and learning. This essay...... and architectural heritage; another group tries to embed new performative technologies in expressive architectural representation. Finally, this essay provides a theoretical framework for the analysis of the political rationales of these projects and for the architectural representation bridges the gap between...

Multiple-image authentication with a cascaded multilevel architecture based on amplitude field random sampling and phase information multiplexing.

Science.gov (United States)

Fan, Desheng; Meng, Xiangfeng; Wang, Yurong; Yang, Xiulun; Pan, Xuemei; Peng, Xiang; He, Wenqi; Dong, Guoyan; Chen, Hongyi

2015-04-10

A multiple-image authentication method with a cascaded multilevel architecture in the Fresnel domain is proposed, in which a synthetic encoded complex amplitude is first fabricated, and its real amplitude component is generated by iterative amplitude encoding, random sampling, and space multiplexing for the low-level certification images, while the phase component of the synthetic encoded complex amplitude is constructed by iterative phase information encoding and multiplexing for the high-level certification images. Then the synthetic encoded complex amplitude is iteratively encoded into two phase-type ciphertexts located in two different transform planes. During high-level authentication, when the two phase-type ciphertexts and the high-level decryption key are presented to the system and then the Fresnel transform is carried out, a meaningful image with good quality and a high correlation coefficient with the original certification image can be recovered in the output plane. Similar to the procedure of high-level authentication, in the case of low-level authentication with the aid of a low-level decryption key, no significant or meaningful information is retrieved, but it can result in a remarkable peak output in the nonlinear correlation coefficient of the output image and the corresponding original certification image. Therefore, the method realizes different levels of accessibility to the original certification image for different authority levels with the same cascaded multilevel architecture.

Quantitative 3-dimensional imaging of auxin and cytokinin levels in transgenic soybean and medicago truncatula roots via two-photon induced fluorescence imaging

Science.gov (United States)

Fisher, Jon; Gaillard, Paul; Nurmalasari, Ni Putu Dewi; Fellbaum, Carl; Subramaniam, Sen; Smith, Steve

2018-02-01

Industrial nitrogen fertilizers account for nearly 50% of the fossil fuel costs in modern agriculture and contribute to soil and water pollution. Therefore, significant interest exists in understanding and characterizing the efficiency of nitrogen fixation, and the biochemical signaling pathways which orchestrate the plant-microbial symbiosis through which plants fix nitrogen. Legume plant species exhibit a particularly efficient nitrogen uptake mechanism, using root nodules which house nitrogen-fixing rhizobial bacteria. While nodule development has been widely studied, there remain significant gaps in understanding the regulatory hormones' role in plant development. In this work, we produce 3-dimensional maps of auxin (AX) and cytokinin (CK) hormone concentrations within model plant root tips and nodules with respect to root architecture and cell type. Soybean and Medicago plants were transfected with a two-color fluorescent vector with AXsensitive green fluorescent protein (GFP) and CK-sensitive TdTomato (TdT). 3D images of soybean root nodules were captured using two-photon induced fluorescence microscopy. The resulting images were computationally analyzed using the localization code first developed by Weeks and later adapted by Kilfoil, and analyzed in the context of the root architecture. Statistical analysis of the resulting 3D hormone level maps reproduce-well the known roles of AX and CK in developing plant roots, and are the first quantitative description of these regulatory hormones tied to specific plant architecture. The analytical methods used, and the spatial distribution of these key regulatory hormones in plant roots, nodule primordia and root nodules, and their statistical interpretation are presented.

Architecture & Environment

Science.gov (United States)

Erickson, Mary; Delahunt, Michael

2010-01-01

Most art teachers would agree that architecture is an important form of visual art, but they do not always include it in their curriculums. In this article, the authors share core ideas from "Architecture and Environment," a teaching resource that they developed out of a long-term interest in teaching architecture and their fascination with the…

Building a Foundation for the Implementation of an Enterprise Architecture for the Argentinian Army

Science.gov (United States)

2016-06-01

architectural layers can be identified in the Argentinian Army. These layers are the strategic level, the business and operations process level, the...use of the right architecture . Successful organizations built an automated IT infrastructure and digitized processes to implement the best business ...According to the TOGAF website (The Open Group, 2016), the architecture of an enterprise is divided into four categories of types:  Business

A Hybrid Architecture for Vision-Based Obstacle Avoidance

Directory of Open Access Journals (Sweden)

Mehmet Serdar Güzel

2013-01-01

Full Text Available This paper proposes a new obstacle avoidance method using a single monocular vision camera as the only sensor which is called as Hybrid Architecture. This architecture integrates a high performance appearance-based obstacle detection method into an optical flow-based navigation system. The hybrid architecture was designed and implemented to run both methods simultaneously and is able to combine the results of each method using a novel arbitration mechanism. The proposed strategy successfully fused two different vision-based obstacle avoidance methods using this arbitration mechanism in order to permit a safer obstacle avoidance system. Accordingly, to establish the adequacy of the design of the obstacle avoidance system, a series of experiments were conducted. The results demonstrate the characteristics of the proposed architecture, and the results prove that its performance is somewhat better than the conventional optical flow-based architecture. Especially, the robot employing Hybrid Architecture avoids lateral obstacles in a more smooth and robust manner than when using the conventional optical flow-based technique.

Computer Architecture A Quantitative Approach

CERN Document Server

Hennessy, John L

2007-01-01

The era of seemingly unlimited growth in processor performance is over: single chip architectures can no longer overcome the performance limitations imposed by the power they consume and the heat they generate. Today, Intel and other semiconductor firms are abandoning the single fast processor model in favor of multi-core microprocessors--chips that combine two or more processors in a single package. In the fourth edition of Computer Architecture, the authors focus on this historic shift, increasing their coverage of multiprocessors and exploring the most effective ways of achieving parallelis

Exporting Humanist Architecture

DEFF Research Database (Denmark)

Nielsen, Tom

2016-01-01

The article is a chapter in the catalogue for the Danish exhibition at the 2016 Architecture Biennale in Venice. The catalogue is conceived at an independent book exploring the theme Art of Many - The Right to Space. The chapter is an essay in this anthology tracing and discussing the different...... values and ethical stands involved in the export of Danish Architecture. Abstract: Danish architecture has, in a sense, been driven by an unwritten contract between the architects and the democratic state and its institutions. This contract may be viewed as an ethos – an architectural tradition...... with inherent aesthetic and moral values. Today, however, Danish architecture is also an export commodity. That raises questions, which should be debated as openly as possible. What does it mean for architecture and architects to practice in cultures and under political systems that do not use architecture...

Architecture of Intermodal Complex

NARCIS (Netherlands)

Lee, S.; Herneoja, Aulikki; Österlund, Toni; Markkanen, Piia

This paper focuses on the conception and design of architecture as the work of producing media about buildings and other environmental artifacts. I approach
the questions regarding simplicity and complexity through "interdependence" and "intermodality." I believe the two concepts offer more

COMPREHENSIVE ENVIRONMENTAL DESIGN (CED STUDIO IN TWO ARCHITECTURE SCHOOLS IN KARACHI: EVOLUTION, PROCESS AND IMPACTS

Directory of Open Access Journals (Sweden)

Noman Ahmed

2010-03-01

Full Text Available Since 1979, a studio module was introduced in the final year studies of Bachelor of Architecture programme at the Dawood College of Engineering and Technology, Karachi which was the only architecture school in the city at that time. A key objective of this studio module was to sensitize the ‘architects in making’ about context of the built environment, the process through which it was shaped and the forces that contributed in its shaping. The students were assigned to study a micro urban area for indepth investigation and analysis. At the conclusion, analytical presentations followed that also included basic proposals for addressing problems that were identified in the studio exercise. Begun in Dawood College, the studio was adopted by many schools of architecture in the country including the NED University, Karachi. This studio had multiple impacts. Understanding the realities behind creation of urban built environment, realization of multiple roles for professional contribution to ongoing metamorphosis and appreciation of diverse fields of studies within the domain of architectural education and practice were some of the vital aspects. The objectives of this paper are to document the evolution and process of CED studio work. The paper also aims to study the affects of CED work on the perception, understandings and professional orientation of architects who graduated from the schools where CED studio was conducted.

Parallel Architectures and Parallel Algorithms for Integrated Vision Systems. Ph.D. Thesis

Science.gov (United States)

Choudhary, Alok Nidhi

1989-01-01

Computer vision is regarded as one of the most complex and computationally intensive problems. An integrated vision system (IVS) is a system that uses vision algorithms from all levels of processing to perform for a high level application (e.g., object recognition). An IVS normally involves algorithms from low level, intermediate level, and high level vision. Designing parallel architectures for vision systems is of tremendous interest to researchers. Several issues are addressed in parallel architectures and parallel algorithms for integrated vision systems.

Fragments of Architecture

DEFF Research Database (Denmark)

Bang, Jacob Sebastian

2016-01-01

Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”......Topic 3: “Case studies dealing with the artistic and architectural work of architects worldwide, and the ties between specific artistic and architectural projects, methodologies and products”...

An architecture for integration of multidisciplinary models

DEFF Research Database (Denmark)

Belete, Getachew F.; Voinov, Alexey; Holst, Niels

2014-01-01

Integrating multidisciplinary models requires linking models: that may operate at different temporal and spatial scales; developed using different methodologies, tools and techniques; different levels of complexity; calibrated for different ranges of inputs and outputs, etc. On the other hand......, Enterprise Application Integration, and Integration Design Patterns. We developed an architecture of a multidisciplinary model integration framework that brings these three aspects of integration together. Service-oriented-based platform independent architecture that enables to establish loosely coupled...

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Enterprise architecture management

DEFF Research Database (Denmark)

Rahimi, Fatemeh; Gøtze, John; Møller, Charles

2017-01-01

architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

Virtual Reality for Architectural or Territorial Representations: Usability Perceptions

Directory of Open Access Journals (Sweden)

Atta Idrawani Zaini

2017-05-01

Full Text Available Virtual reality (VR is widely being researched within various aspects of real-world applications. As architecture and urban design are very much adhered to evaluating and designing space, physical representations are deemed as incompetent to deliver a full-scale depiction of a space. Similarly, digital models are very much also limited in that sense. VR can deliver a full-scale virtual environment (VE, tricking users to be immersed in the replicated environment. This is an advantage for the aforementioned design disciplines, as more relatable and realistic depiction of a space can be modelled. The notion of its usability has become important to be understood from the perspective of architecture and urban design. This paper measured the respondents’ perceptions of VR’s usability through measuring its quality of use based on several criteria. The criteria established were the ease of use, usefulness, and satisfaction. Different levels of architectural details were decided as a form of control. A total of N=96 randomly selected respondents from various backgrounds participated in the survey as they were divided into four different group of treatments. Each group experienced a different VE with different level of architectural details. The first section of analysis is a one-sample analysis and the second is a group difference analysis. From the first analysis, it was found that the respondents perceived VR as a usable tool for architectural or territorial representation. Using Kruskal-Wallis test, it was found that there was no statistically significant difference between groups, suggesting that the respondents perceived VR as usable regardless of the level of architectural details. As this paper used perception data based on the quality of use alone, the efficiency of VR system was not measured. Thus, this paper recommends further studies to be conducted on the system’s efficiency to reflect its usability in full extent.

Digital Architecture – Results From a Gap Analysis

Energy Technology Data Exchange (ETDEWEB)

Oxstrand, Johanna Helene [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fitzgerald, Kirk [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The digital architecture is defined as a collection of IT capabilities needed to support and integrate a wide-spectrum of real-time digital capabilities for nuclear power plant performance improvements. The digital architecture can be thought of as an integration of the separate I&C and information systems already in place in NPPs, brought together for the purpose of creating new levels of automation in NPP work activities. In some cases, it might be an extension of the current communication systems, to provide digital communications where they are currently analog only. This collection of IT capabilities must in turn be based on a set of user requirements that must be supported for the interconnected technologies to operate in an integrated manner. These requirements, simply put, are a statement of what sorts of digital work functions will be exercised in a fully-implemented seamless digital environment and how much they will be used. The goal of the digital architecture research is to develop a methodology for mapping nuclear power plant operational and support activities into the digital architecture, which includes the development of a consensus model for advanced information and control architecture. The consensus model should be developed at a level of detail that is useful to the industry. In other words, not so detailed that it specifies specific protocols and not so vague that it is only provides a high level description of technology. The next step towards the model development is to determine the current state of digital architecture at typical NPPs. To investigate the current state, the researchers conducted a gap analysis to determine to what extent the NPPs can support the future digital technology environment with their existing I&C and IT structure, and where gaps exist with respect to the full deployment of technology over time. The methodology, result, and conclusions from the gap analysis are described in this report.

Speculations on the representation of architecture in virtual reality

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars; Bundgård, Ture Slot

2017-01-01

This paper discusses the present and future possibilities of representation models of architecture in new media such as virtual reality, seen in the broader context of tradition, perception, and neurology. Through comparative studies of real and virtual scenarios using eye tracking, the paper...... discusses if the constantly evolving toolset for architectural representation has in itself changed the core values of architecture, or if it is rather the level of skilful application of technology that can inflict on architecture and its quality. It is easy to contemplate virtual reality as an extension...... to the visual field of perception. However, this should not necessarily imply an acceptance of the dominance of vision over the other senses, and the much-criticized retinal architecture with its inherent loss of plasticity. Recent neurology studies indicate that 3D representation models in virtual reality...

The Changes in Architecture Terminology

Directory of Open Access Journals (Sweden)

Francois Tran

2012-10-01

Full Text Available The intention of this research is to inspire a discussion about the changes in architecture terminologywith the revolution in communication and representation forms as a result of digitalisation.The blurred boundary between the virtual and the analogue worlds, the misunderstandings andthe confusion that appear with the interaction of these two worlds nowadays form the major problems facing architectural design, education and research. The researchers in this field arefocused on the interface, the meeting and the transformation point between the digital and analogue worlds in order to prevent those problems and confusions. One of the main reasonsof this ambiguity is the architectural terminology that changes according to the changing status of architectural representation i.e. new forms of representation; new forms of communicationi.e. the new role of the architect and the researcher.Whenever and wherever information and knowledge specialised is created, communicated ortransformed terminology is involved in a way or another. An absence of terminology is combined with an absence of an understanding of concepts. Therefore with the new information and communication technologies; new and developing subject areas the existence of terminology and its update is indispensable. Thus the changing status of the terminology must be analysed. As architecture terminology is essential to improve today’s challenging, multidisciplinary communication in order to clarify the problems of ambiguity and unawareness (as a result of shift of specific architectural vocabulary it is necessary to analyse the changes in the architectural terminology which will form the discussion point of the following paper.As this paper is the beginning step of a research project which started on the occasion of the conference proposed by EAAE/ARCC we will here present only the objectives of this research,its general problematics, the methods that we wish to develop and some provisional

Two-dimensional layer architecture assembled by Keggin polyoxotungstate, Cu(II)-EDTA complex and sodium linker: Synthesis, crystal structures, and magnetic properties

International Nuclear Information System (INIS)

Liu Hong; Xu Lin; Gao Guanggang; Li Fengyan; Yang Yanyan; Li Zhikui; Sun Yu

2007-01-01

Reaction of Keggin polyoxotungstate with copper(II)-EDTA (EDTA=ethylenediamine tetraacetate) complex under mild conditions led to the formation of hybrid inorganic-organic compounds Na 4 (OH)[(Cu 2 EDTA)PW 12 O 40 ].17H 2 O (1) and Na 4 [(Cu 2 EDTA)SiW 12 O 40 ].19H 2 O (2). The single-crystal X-ray diffraction analyses reveal their two structural features: (1) one-dimensional chain structure consisting of Keggin polyoxotungstate and copper(II)-EDTA complex; (2) Two-dimensional layer architecture assembled by the one-dimensional chain structure and sodium linker. The results of magnetic measurements in the temperature range 300-2 K indicated the existence of ferromagnetic exchange interactions between the Cu II ions for both compounds. In addition, TGA analysis, IR spectra, and electrochemical properties were also investigated to well characterize these two compounds. - Graphical abstract: Two new polyoxometalate-based hybrids, Na 4 (OH)[Cu 2 (EDTA)PW 12 O 40 ].17H 2 O (1) and Na 4 [Cu 2 (EDTA)SiW 12 O 40 ].19H 2 O (2), have been synthesized and structurally characterized, which consist of one-dimensional chain structure assembled by Keggin polyoxotungstate and copper(II)-EDTA complex. The chains are further connected to form two-dimensional layer architecture assembled by the one-dimensional chain structure and sodium linker

LEVERAGING THE MICROSERVICE ARCHITECTURE FOR NEXT-GENERATION IOT APPLICATIONS

Directory of Open Access Journals (Sweden)

Logica BANICA

2017-12-01

Full Text Available This paper aims to present two modern technologies that contribute to the development of the Internet-of-Things (IoT, namely the microservice architecture for application development, and their execution in the Fog/Edge computing layer, closer to the data sources, which leads to better performance. For this purpose, a four-level model is proposed and the functions of each are specified. It also introduces some platforms for building and deploying microservices launched on the Information Technology (IT market by major companies.

The architecture of a video image processor for the space station

Science.gov (United States)

Yalamanchili, S.; Lee, D.; Fritze, K.; Carpenter, T.; Hoyme, K.; Murray, N.

1987-01-01

The architecture of a video image processor for space station applications is described. The architecture was derived from a study of the requirements of algorithms that are necessary to produce the desired functionality of many of these applications. Architectural options were selected based on a simulation of the execution of these algorithms on various architectural organizations. A great deal of emphasis was placed on the ability of the system to evolve and grow over the lifetime of the space station. The result is a hierarchical parallel architecture that is characterized by high level language programmability, modularity, extensibility and can meet the required performance goals.

Prototype architecture for a VLSI level zero processing system. [Space Station Freedom

Science.gov (United States)

Shi, Jianfei; Grebowsky, Gerald J.; Horner, Ward P.; Chesney, James R.

1989-01-01

The prototype architecture and implementation of a high-speed level zero processing (LZP) system are discussed. Due to the new processing algorithm and VLSI technology, the prototype LZP system features compact size, low cost, high processing throughput, and easy maintainability and increased reliability. Though extensive control functions have been done by hardware, the programmability of processing tasks makes it possible to adapt the system to different data formats and processing requirements. It is noted that the LZP system can handle up to 8 virtual channels and 24 sources with combined data volume of 15 Gbytes per orbit. For greater demands, multiple LZP systems can be configured in parallel, each called a processing channel and assigned a subset of virtual channels. The telemetry data stream will be steered into different processing channels in accordance with their virtual channel IDs. This super system can cope with a virtually unlimited number of virtual channels and sources. In the near future, it is expected that new disk farms with data rate exceeding 150 Mbps will be available from commercial vendors due to the advance in disk drive technology.

Architecture for autonomy

Science.gov (United States)

Broten, Gregory S.; Monckton, Simon P.; Collier, Jack; Giesbrecht, Jared

2006-05-01

In 2002 Defence R&D Canada changed research direction from pure tele-operated land vehicles to general autonomy for land, air, and sea craft. The unique constraints of the military environment coupled with the complexity of autonomous systems drove DRDC to carefully plan a research and development infrastructure that would provide state of the art tools without restricting research scope. DRDC's long term objectives for its autonomy program address disparate unmanned ground vehicle (UGV), unattended ground sensor (UGS), air (UAV), and subsea and surface (UUV and USV) vehicles operating together with minimal human oversight. Individually, these systems will range in complexity from simple reconnaissance mini-UAVs streaming video to sophisticated autonomous combat UGVs exploiting embedded and remote sensing. Together, these systems can provide low risk, long endurance, battlefield services assuming they can communicate and cooperate with manned and unmanned systems. A key enabling technology for this new research is a software architecture capable of meeting both DRDC's current and future requirements. DRDC built upon recent advances in the computing science field while developing its software architecture know as the Architecture for Autonomy (AFA). Although a well established practice in computing science, frameworks have only recently entered common use by unmanned vehicles. For industry and government, the complexity, cost, and time to re-implement stable systems often exceeds the perceived benefits of adopting a modern software infrastructure. Thus, most persevere with legacy software, adapting and modifying software when and wherever possible or necessary -- adopting strategic software frameworks only when no justifiable legacy exists. Conversely, academic programs with short one or two year projects frequently exploit strategic software frameworks but with little enduring impact. The open-source movement radically changes this picture. Academic frameworks

Optimal causal inference: estimating stored information and approximating causal architecture.

Science.gov (United States)

Still, Susanne; Crutchfield, James P; Ellison, Christopher J

2010-09-01

We introduce an approach to inferring the causal architecture of stochastic dynamical systems that extends rate-distortion theory to use causal shielding--a natural principle of learning. We study two distinct cases of causal inference: optimal causal filtering and optimal causal estimation. Filtering corresponds to the ideal case in which the probability distribution of measurement sequences is known, giving a principled method to approximate a system's causal structure at a desired level of representation. We show that in the limit in which a model-complexity constraint is relaxed, filtering finds the exact causal architecture of a stochastic dynamical system, known as the causal-state partition. From this, one can estimate the amount of historical information the process stores. More generally, causal filtering finds a graded model-complexity hierarchy of approximations to the causal architecture. Abrupt changes in the hierarchy, as a function of approximation, capture distinct scales of structural organization. For nonideal cases with finite data, we show how the correct number of the underlying causal states can be found by optimal causal estimation. A previously derived model-complexity control term allows us to correct for the effect of statistical fluctuations in probability estimates and thereby avoid overfitting.

Image and Morphology in Modern Theory of Architecture

Science.gov (United States)

Yankovskaya, Y. S.; Merenkov, A. V.

2017-11-01

This paper is devoted to some important and fundamental problems of the modern Russian architectural theory. These problems are: methodological and technological retardation; substitution of the modern professional architectural theoretical knowledge by the humanitarian concepts; preference of the traditional historical or historical-theoretical research. One of the most probable ways is the formation of useful modern subject (and multi-subject)-oriented concepts in architecture. To get over the criticism and distrust of the architectural theory is possible through the recognition of an important role of the subject (architect, consumer, contractor, ruler, etc.) and direction of the practical tasks of the forming human environment in the today’s rapidly changing world and post-industrial society. In this article we consider the evolution of two basic concepts for the theory of architecture such as the image and morphology.

Deep Space Network information system architecture study

Science.gov (United States)

Beswick, C. A.; Markley, R. W. (Editor); Atkinson, D. J.; Cooper, L. P.; Tausworthe, R. C.; Masline, R. C.; Jenkins, J. S.; Crowe, R. A.; Thomas, J. L.; Stoloff, M. J.

1992-01-01

The purpose of this article is to describe an architecture for the DSN information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990's. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies--i.e., computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control.

Cinematic collage as architectural design research

OpenAIRE

Carless, T.; Troiani, I.

2018-01-01

This chapter argues that cinematic representation can, and must, be understood as a method of developing a form of critical architectural enquiry and thinking in the same manner as text - a textual analysis and a communication means for practice-based research. The proposition is that cinematic architectural drawing and the discourse of occupied space are inseparable and that the limits of both are products of specific ideological and cultural practices. In this chapter, two different bodies ...

A computer architecture for the implementation of SDL

Energy Technology Data Exchange (ETDEWEB)

Crutcher, L A

1989-01-01

Finite State Machines (FSMs) are a part of well-established automata theory. The FSM model is useful in all stages of system design, from abstract specification to implementation in hardware. The FSM model has been studied as a technique in software design, and the implementation of this type of software considered. The Specification and Description Language (SDL) has been considered in detail as an example of this approach. The complexity of systems designed using SDL warrants their implementation through a programmed computer. A benchmark for the implementation of SDL has been established and the performance of SDL on three particular computer architectures investigated. Performance is judged according to this benchmark and also the ease of implementation, which is related to the confidence of a correct implementation. The implementation on 68000s and transputers is considered as representative of established and state-of-the-art microprocessors respectively. A third architecture that uses a processor that has been proposed specifically for the implementation of SDL is considered as a high-level custom architecture. Analysis and measurements of the benchmark on each architecture indicates that the execution time of SDL decreases by an order of magnitude from the 68000 to the transputer to the custom architecture. The ease of implementation is also greater when the execution time is reduced. A study of some real applications of SDL indicates that the benchmark figures are reflected in user-oriented measures of performance such as data throughput and response time. A high-level architecture such as the one proposed here for SDL can provide benefits in terms of execution time and correctness.

Context Aware Middleware Architectures: Survey and Challenges

Directory of Open Access Journals (Sweden)

Xin Li

2015-08-01

Full Text Available Context aware applications, which can adapt their behaviors to changing environments, are attracting more and more attention. To simplify the complexity of developing applications, context aware middleware, which introduces context awareness into the traditional middleware, is highlighted to provide a homogeneous interface involving generic context management solutions. This paper provides a survey of state-of-the-art context aware middleware architectures proposed during the period from 2009 through 2015. First, a preliminary background, such as the principles of context, context awareness, context modelling, and context reasoning, is provided for a comprehensive understanding of context aware middleware. On this basis, an overview of eleven carefully selected middleware architectures is presented and their main features explained. Then, thorough comparisons and analysis of the presented middleware architectures are performed based on technical parameters including architectural style, context abstraction, context reasoning, scalability, fault tolerance, interoperability, service discovery, storage, security & privacy, context awareness level, and cloud-based big data analytics. The analysis shows that there is actually no context aware middleware architecture that complies with all requirements. Finally, challenges are pointed out as open issues for future work.

A Comparative Study on Chinese Architecture in Peninsular Malaysia and Mainland China

Directory of Open Access Journals (Sweden)

Somayeh Armani

2014-12-01

Full Text Available Chinese architecture is one of the most prevailing architectural styles in Peninsular Malaysia, which is inspired from architectural specimens in Mainland China. It can be stated that the Chinese structures in the Peninsula are variations of Chinese architecture in Mainland China since the Chinese builders in this area have faced the long journey of migration, assimilation and integration with new culture and environment. This paper intends to focus on this architecture, its various typology and characteristics, and comprehend it in deeper levels by providing comparison between this architectural style in Peninsular Malaysia and Mainland China. To achieve this goal, this article applied Historical-Comparative Research method, during which a variety of evidence concerning classical Chinese architecture in Mainland China as well as Peninsular Malaysia was compared and interpreted. Findings in this article show that Chinese architecture in Peninsular Malaysia mainly follows Southern China's architectural style, whilst Northern China's architectural influence is perceivable in the later stage of its development.

A Survey on Next-generation Power Grid Data Architecture

Energy Technology Data Exchange (ETDEWEB)

You, Shutang [University of Tennessee, Knoxville (UTK); Zhu, Dr. Lin [University of Tennessee (UT); Liu, Yong [ORNL; Liu, Yilu [ORNL; Shankar, Mallikarjun (Arjun) [ORNL; Robertson, Russell [Grid Protection Alliance; King Jr, Thomas J [ORNL

2015-01-01

The operation and control of power grids will increasingly rely on data. A high-speed, reliable, flexible and secure data architecture is the prerequisite of the next-generation power grid. This paper summarizes the challenges in collecting and utilizing power grid data, and then provides reference data architecture for future power grids. Based on the data architecture deployment, related research on data architecture is reviewed and summarized in several categories including data measurement/actuation, data transmission, data service layer, data utilization, as well as two cross-cutting issues, interoperability and cyber security. Research gaps and future work are also presented.

Design and construction principles in nature and architecture

International Nuclear Information System (INIS)

Knippers, Jan; Speck, Thomas

2012-01-01

This paper will focus on how the emerging scientific discipline of biomimetics can bring new insights into the field of architecture. An analysis of both architectural and biological methodologies will show important aspects connecting these two. The foundation of this paper is a case study of convertible structures based on elastic plant movements.

Design and construction principles in nature and architecture.

Science.gov (United States)

Knippers, Jan; Speck, Thomas

2012-03-01

This paper will focus on how the emerging scientific discipline of biomimetics can bring new insights into the field of architecture. An analysis of both architectural and biological methodologies will show important aspects connecting these two. The foundation of this paper is a case study of convertible structures based on elastic plant movements.

Architecture for the Secret-Key BC3 Cryptography Algorithm

Directory of Open Access Journals (Sweden)

Arif Sasongko

2011-08-01

Full Text Available Cryptography is a very important aspect in data security. The focus of research in this field is shifting from merely security aspect to consider as well the implementation aspect. This paper aims to introduce BC3 algorithm with focus on its hardware implementation. It proposes architecture for the hardware implementation for this algorithm. BC3 algorithm is a secret-key cryptography algorithm developed with two considerations: robustness and implementation efficiency. This algorithm has been implemented on software and has good performance compared to AES algorithm. BC3 is improvement of BC2 and AE cryptographic algorithm and it is expected to have the same level of robustness and to gain competitive advantages in the implementation aspect. The development of the architecture gives much attention on (1 resource sharing and (2 having single clock for each round. It exploits regularity of the algorithm. This architecture is then implemented on an FPGA. This implementation is three times smaller area than AES, but about five times faster. Furthermore, this BC3 hardware implementation has better performance compared to BC3 software both in key expansion stage and randomizing stage. For the future, the security of this implementation must be reviewed especially against side channel attack.

BASIC LAWS OF FORMATION OF INNOVATION HISTORICAL ARCHITECTURE AND TOWN PLANNING FACILITIES IN URBAN ENVIRONMENT

Directory of Open Access Journals (Sweden)

SMIRNOVA O. V.

2016-06-01

Full Text Available Abstract. Formulation of the problem. Innovative buildings and structures are architectural objects, the distinguishing feature of which is the presence of certain levels of their formation - material and functional (provided certain functional purpose object and its material embodiment, art-shaped (the presence of an individual artistic image structural and process (use of new technologies and fundamentally new design; communication and of environmental (harmonious integration of the object in the environment. Absence of analogues - a prerequisite for innovative buildings. Innovative architectural and urban objects created in the development of civilization. Innovations in design and construction of architectural and urban facilities - this is the final result of the creation (design and development (implementation of a fundamentally new or modified facility satisfies human needs. Purpose. Consider the historical features of formation of innovative architectural and urban facilities in the urban environment. The main objectives - to identify the main types of innovative historical objects and identify patterns of their formation. Conclusions. The main historical innovative architectural and urban facilities were buildings and structures formed during two periods of historical development: in the pre-industrial period and during the industrial revolution.

Language-based support for service oriented architectures

DEFF Research Database (Denmark)

Giambiagi, Pablo; Owe, Olaf; Ravn, Anders Peter

2006-01-01

The fast evolution of the Internet has popularized service-oriented architectures (SOA) with their promise of dynamic IT-supported inter-business collaborations. Yet this popularity does not reflect on the number of actual applications using the architecture. Programming models in use today make...... a poor match for the distributed, loosely-coupled, document-based nature of SOA. The gap is actually increasing. For example, interoperability between different organizations, requires contracts to reduce risks. Thus, high-level models of contracts are making their way into service-oriented architectures......, but application developers are still left to their own devices when it comes to writing code that will comply with a contract. This paper surveys existing and future directions regarding language-based solutions to the above problem....

Maritime Domain Awareness Architecture Management Hub Strategy

National Research Council Canada - National Science Library

2008-01-01

This document provides an initial high level strategy for carrying out the responsibilities of the national Maritime Domain Awareness Architecture Management Hub to deliver a standards based service...

Two-Level Semantics and Code Generation

DEFF Research Database (Denmark)

Nielson, Flemming; Nielson, Hanne Riis

1988-01-01

A two-level denotational metalanguage that is suitable for defining the semantics of Pascal-like languages is presented. The two levels allow for an explicit distinction between computations taking place at compile-time and computations taking place at run-time. While this distinction is perhaps...... not absolutely necessary for describing the input-output semantics of programming languages, it is necessary when issues such as data flow analysis and code generation are considered. For an example stack-machine, the authors show how to generate code for the run-time computations and still perform the compile...

Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE)

Science.gov (United States)

2005-04-01

PA 15213-3890 Methodical Design of Software Architecture Using an Architecture Design Assistant (ArchE) Felix Bachmann and Mark Klein Software...DATES COVERED 00-00-2005 to 00-00-2005 4. TITLE AND SUBTITLE Methodical Design of Software Architecture Using an Architecture Design Assistant...important for architecture design – quality requirements and constraints are most important Here’s some evidence: If the only concern is

Logic of historical development of the formation process of architectural and construction solutions

Directory of Open Access Journals (Sweden)

Baranov Valeriy Aleksandrovich

2014-05-01

Full Text Available In research field of development processes of architectural and construction decisions (ACD there is already very considerable scientific, normative and technical material. And still in the end of the research boom in this area (the 90th many authors stated their weak return in practical design. High methodological potential gives understanding of the act of ACD formation as a special kind of activity, and its structure - as historical phenomenon that allows to put two main methodological principles in the basis of the research: the principle of activity and the principle of level organization of historically formed objects. As a result it was succeeded to reveal 6 main stages of historical development of ACD formation process and 6 levels of its modern organization. Origin stage - is the transition from animal to human construction and emergence of the first stage of ACD formation - a measurement. The reproductive stage is characterized by centuries-old reproduction of steady volume forms of constructions. At a composite stage professional presentation detaches external form of a construction from architectural and construction actions and techniques. There occurs transformation into a subject of architectural and construction activity and creation of a method of composition on this basis. At a constructive stage engineers are involved in construction process, there is a change of style of thinking, emergence of construction designs and emergence of a new function of ACD means of configuration, and, at last, final allocation and separation of architectural and construction design from construction. Technological stage is a product of industrialization of construction on which systematization is carried out not only on the level of subject, but also in respect to the operational contents that leads to emergence of ACD program formation. At the sixth, methodological stage of development of ASP, a leading way change of the ACD formation becomes a

A new FPGA architecture suitable for DSP applications

Energy Technology Data Exchange (ETDEWEB)

Wang Liyun; Lai Jinmei; Tong Jiarong; Tang Pushan; Chen Xing; Duan Xueyan; Chen Liguang; Wang Jian; Wang Yuan, E-mail: 071021037@fudan.edu.cn [ASIC and System State Key Laboratory, Fudan University, Shanghai 201203 (China)

2011-05-15

A new FPGA architecture suitable for digital signal processing applications is presented. DSP modules can be inserted into FPGA conveniently with the proposed architecture, which is much faster when used in the field of digital signal processing compared with traditional FPGAs. An advanced 2-level MUX (multiplexer) is also proposed. With the added SLEEP MODE PASS to traditional 2-level MUX, static leakage is reduced. Furthermore, buffers are inserted at early returns of long lines. With this kind of buffer, the delay of the long line is improved by 9.8% while the area increases by 4.37%. The layout of this architecture has been taped out in standard 0.13 {mu}m CMOS technology successfully. The die size is 6.3 x 4.5 mm{sup 2} with the QFP208 package. Test results show that performances of presented classical DSP cases are improved by 28.6%-302% compared with traditional FPGAs. (semiconductor integrated circuits)

A new FPGA architecture suitable for DSP applications

International Nuclear Information System (INIS)

Wang Liyun; Lai Jinmei; Tong Jiarong; Tang Pushan; Chen Xing; Duan Xueyan; Chen Liguang; Wang Jian; Wang Yuan

2011-01-01

A new FPGA architecture suitable for digital signal processing applications is presented. DSP modules can be inserted into FPGA conveniently with the proposed architecture, which is much faster when used in the field of digital signal processing compared with traditional FPGAs. An advanced 2-level MUX (multiplexer) is also proposed. With the added SLEEP MODE PASS to traditional 2-level MUX, static leakage is reduced. Furthermore, buffers are inserted at early returns of long lines. With this kind of buffer, the delay of the long line is improved by 9.8% while the area increases by 4.37%. The layout of this architecture has been taped out in standard 0.13 μm CMOS technology successfully. The die size is 6.3 x 4.5 mm 2 with the QFP208 package. Test results show that performances of presented classical DSP cases are improved by 28.6%-302% compared with traditional FPGAs. (semiconductor integrated circuits)

Constituent period in theoretization of minimalism in architecture

Directory of Open Access Journals (Sweden)

Stevanović Vladimir

2012-01-01

Full Text Available The paper analyzes architectural discourse that is formed around the term minimalism, between 1976 and 1999, a period that I consider constitutive for theorization of the term. The presentation is directed by two hypotheses: I minimalism in architecture does not have a continuous stream of origin, development, and is not a style, direction, movement, school, genre or trend in terms of how it is defined in disciplines such as art history, aesthetics and art theory II the fact that it's rare for an architect to declare himself a minimalist suggests that minimalism in architecture is actually a product or construct of an architectural discourse that emerged from the need to consolidate the existing obvious and widespread formal idiom in architecture partly during and after post-modernism. It is indicative that the writing of history of minimalism in architecture, in its most intensive period - the nineties, takes place mainly in three cities: London, Barcelona and Milan. In this sense, we can examine how each of these centers emphasized its role, through the ambition of minimalism in architecture to appear as an authentic local creation.

Moderation analysis using a two-level regression model.

Science.gov (United States)

Yuan, Ke-Hai; Cheng, Ying; Maxwell, Scott

2014-10-01

Moderation analysis is widely used in social and behavioral research. The most commonly used model for moderation analysis is moderated multiple regression (MMR) in which the explanatory variables of the regression model include product terms, and the model is typically estimated by least squares (LS). This paper argues for a two-level regression model in which the regression coefficients of a criterion variable on predictors are further regressed on moderator variables. An algorithm for estimating the parameters of the two-level model by normal-distribution-based maximum likelihood (NML) is developed. Formulas for the standard errors (SEs) of the parameter estimates are provided and studied. Results indicate that, when heteroscedasticity exists, NML with the two-level model gives more efficient and more accurate parameter estimates than the LS analysis of the MMR model. When error variances are homoscedastic, NML with the two-level model leads to essentially the same results as LS with the MMR model. Most importantly, the two-level regression model permits estimating the percentage of variance of each regression coefficient that is due to moderator variables. When applied to data from General Social Surveys 1991, NML with the two-level model identified a significant moderation effect of race on the regression of job prestige on years of education while LS with the MMR model did not. An R package is also developed and documented to facilitate the application of the two-level model.

Innovation in high-level capture and diffusion of tacit architectural knowledge

OpenAIRE

Burry, Mark

2017-01-01

This paper focusses on an ‘Embedded Doctoral Design Program’ (EDDP), comprising a cohort of design PhD candidates who are ‘embedded’ outside the university for a substantial part of their candidature. Specifically, the paper details the framework and outcome for Australian doctoral candidates in architecture placed in contexts outside their experience and immediate expertise, and outside the traditional academic research setting. These contexts can be drawn potentially from professional pract...

Open architecture of smart sensor suites

Science.gov (United States)

Müller, Wilmuth; Kuwertz, Achim; Grönwall, Christina; Petersson, Henrik; Dekker, Rob; Reinert, Frank; Ditzel, Maarten

2017-10-01

Experiences from recent conflicts show the strong need for smart sensor suites comprising different multi-spectral imaging sensors as core elements as well as additional non-imaging sensors. Smart sensor suites should be part of a smart sensor network - a network of sensors, databases, evaluation stations and user terminals. Its goal is to optimize the use of various information sources for military operations such as situation assessment, intelligence, surveillance, reconnaissance, target recognition and tracking. Such a smart sensor network will enable commanders to achieve higher levels of situational awareness. Within the study at hand, an open system architecture was developed in order to increase the efficiency of sensor suites. The open system architecture for smart sensor suites, based on a system-of-systems approach, enables combining different sensors in multiple physical configurations, such as distributed sensors, co-located sensors combined in a single package, tower-mounted sensors, sensors integrated in a mobile platform, and trigger sensors. The architecture was derived from a set of system requirements and relevant scenarios. Its mode of operation is adaptable to a series of scenarios with respect to relevant objects of interest, activities to be observed, available transmission bandwidth, etc. The presented open architecture is designed in accordance with the NATO Architecture Framework (NAF). The architecture allows smart sensor suites to be part of a surveillance network, linked e.g. to a sensor planning system and a C4ISR center, and to be used in combination with future RPAS (Remotely Piloted Aircraft Systems) for supporting a more flexible dynamic configuration of RPAS payloads.

Modern Conditions and the Impacts of the Creation of Architectural Environment

Science.gov (United States)

Abyzov, Vadym

2017-10-01

The purpose of this research is an attempt to identify and analyse the modern conditions and impacts of the creation of architectural environment and on this basis to determine the main directions and tasks of the development of architecture at the appropriate hierarchical levels. A comprehensive review and structural analysis of all impact factors and different current conditions that lead to the sustainable architecture design are conducted in the proposal. The main groups of factors and conditions such as social-economical, natural-geographic, urban, ergonomics, ecological, typological, technical, cultural, and aesthetics are determined in accordance with their contemporary specifics. This analysis provides an opportunity to define the appropriative hierarchical levels of the modern trends and prospects of creation an effective, attractive and friendly architectural environment. Some examples of author’s projects and implementations is presented in the article. Such methodological approach will help to create a holistic view of the creation architectural environment, will allow to systematize existing knowledges and concepts, practices and prospects of the means and methods of its formation and development.

2005 dossier: granite. Tome: architecture and management of the geologic disposal; Dossier 2005: granite. Tome architecture et gestion du stockage geologique

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This document makes a status of the researches carried out by the French national agency of radioactive wastes (ANDRA) about the geologic disposal of high-level and long-lived radioactive wastes in granite formations. Content: 1 - Approach of the study: main steps since the December 30, 1991 law, ANDRA's research program on disposal in granitic formations; 2 - high-level and long-lived (HLLL) wastes: production scenarios, waste categories, inventory model; 3 - disposal facility design in granitic environment: definition of the geologic disposal functions, the granitic material, general facility design options; 4 - general architecture of a disposal facility in granitic environment: surface facilities, underground facilities, disposal process, operational safety; 5 - B-type wastes disposal area: primary containers of B-type wastes, safety options, concrete containers, disposal alveoles, architecture of the B-type wastes disposal area, disposal process and feasibility aspects, functions of disposal components with time; 6 - C-type wastes disposal area: C-type wastes primary containers, safety options, super-containers, disposal alveoles, architecture of the C-type wastes disposal area, disposal process in a reversibility logics, functions of disposal components with time; 7 - spent fuels disposal area: spent fuel assemblies, safety options, spent fuel containers, disposal alveoles, architecture of the spent fuel disposal area, disposal process in a reversibility logics, functions of disposal components with time; 8 - conclusions: suitability of the architecture with various types of French granites, strong design, reversibility taken into consideration. (J.S.)

An Introduction to Architectural Surety(SM) Education

Energy Technology Data Exchange (ETDEWEB)

Matalucci, R.V.; Miyoshi, D.S.

1998-09-01

This report describes the Sandia activities in the developing field management approach to enhancing National Laboratories (Sandia) educational outreach of architectural and infrastructure surety, a risk the safety, security, and reliability of facilities, systems, and structures. It begins with a description of the field of architectural and infrastmcture surety, including Sandia's historical expertise and experience in nuclear weapons surety. An overview of the 1996 Sandia Workshop on Architectural SuretysM is then provided to reference the initiation of the various activities. This workshop established the need for a surety education program at the University level and recommended that Sandia develop the course material as soon as possible. Technical material was assembled and the course was offered at the University of New Mexico (UNM) during the 1997 spring semester. The bulk of this report accordingly summarizes the lecture material presented in this pioneering graduate-level course on Infrastructure Surety in the Civil Engineering Department at UNM. This groundbreaking class presented subject matter developed by experts from Sandia, and included additional information from guest lecturers from academia, government, and industry. Also included in this report are summaries of the term projects developed by the graduate students, an overview of the 1997 International Conference on Architectural Suretp: Assuring the Performance of Buildings and Injiastruchwes (co-sponsored by Sandia, the American Institute of Architects, and the American Society of Civil Engineers), and recommendations for further course work development. The U.S. Department of Energy provides support to this emerging field of architectural and infrastructure surety and recognizes its broad application to developing government, industry, and professional standards in the national interest.

Architectural freedom and industrialised architecture

DEFF Research Database (Denmark)

Vestergaard, Inge

2012-01-01

to the building physic problems a new industrialized period has started based on light weight elements basically made of wooden structures, faced with different suitable materials meant for individual expression for the specific housing area. It is the purpose of this article to widen up the different design...... to this systematic thinking of the building technique we get a diverse and functional architecture. Creating a new and clearer story telling about new and smart system based thinking behind the architectural expression....

Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones

Directory of Open Access Journals (Sweden)

Stahl Stenslie

2017-04-01

Full Text Available This article describes the art and architectural research project Preemptive Architecture that uses artistic strategies and approaches to create bomb-ready architectural structures that act as instruments for the undoing of violence in war. Increasing environmental usability through destruction represents an inverse strategy that reverses common thinking patterns about warfare, art and architecture. Building structures predestined for a construc­tive destruction becomes a creative act. One of the main motivations behind this paper is to challenge and expand the material thinking as well as the socio-political conditions related to artistic, architectural and design based practices.   Article received: December 12, 2016; Article accepted: January 10, 2017; Published online: April 20, 2017 Original scholarly paper How to cite this article: Stenslie, Stahl, and Magne Wiggen. "Preemptive Architecture: Explosive Art and Future Architectures in Cursed Urban Zones." AM Journal of Art and Media Studies 12 (2017: 29-39. doi: 10.25038/am.v0i12.165

Digital column readout architectures for hybrid pixel detector readout chips

International Nuclear Information System (INIS)

Poikela, T; Plosila, J; Westerlund, T; Buytaert, J; Campbell, M; Gaspari, M De; Llopart, X; Wyllie, K; Gromov, V; Kluit, R; Beuzekom, M van; Zappon, F; Zivkovic, V; Brezina, C; Desch, K; Fu, Y; Kruth, A

2014-01-01

In this paper, two digital column architectures suitable for sparse readout of data from a pixel matrix in trigger-less applications are presented. Each architecture reads out a pixel matrix of 256 x 256 pixels with a pixel pitch of 55 μm. The first architecture has been implemented in the Timepix3 chip, and this is presented together with initial measurements. Simulation results and measured data are compared. The second architecture has been designed for Velopix, a readout chip planned for the LHCb VELO upgrade. Unlike Timepix3, this has to be tolerant to radiation-induced single-event effects. Results from post-layout simulations are shown with the circuit architectures

Communication System Architectures for Missions to Mars - A Preliminary Investigation

Science.gov (United States)

Nguyen, T.; Hinedi, S.; Martin, W.; Tsou, H.

1995-01-01

This paper presents various communication system architectures for Multiple-Link communications with Single Aperture (MULSA) ground station. The proposed architectures are capable of supporting a multiplicity of spacecraft that are within the beamwidth of a single ground station antenna simultaneously. Both short and long term proposals to address this scenario will be discussed. In addition, the paper also discusses the top-level system designs of the proposed architectures and attempts to identify the associated advantages and disadvantages for each system.

The geometric phase in two-level atomic systems

International Nuclear Information System (INIS)

Tian Mingzhen; Barber, Zeb W.; Fischer, Joe A.; Randall Babbitt, Wm.

2004-01-01

We report the observation of the geometric phase in a closed two-level atomic system using stimulated photon echoes. The two-level system studied consists of the two-electronic energy levels ( 3 H 4 and 3 H 6 ) of Tm 3+ doped in YAG crystal. When a two-level atom at an arbitrary superposition state is excited by a pair of specially designed laser pulses, the excited state component gains a relative phase with respect to the ground state component. We identified the phase shift to be of pure geometric nature. The dynamic phase associated to the driving Hamiltonian is unchanged. The experiment results of the phase change agree with the theory to the extent of the measurement limit

Scalable Multi-core Architectures Design Methodologies and Tools

CERN Document Server

Jantsch, Axel

2012-01-01

As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallalization of the computation and 3D integration technologies lead to distributed memory architectures. This book provides a current snapshot of industrial and academic research, conducted as part of the European FP7 MOSART project, addressing urgent challenges in many-core architectures and application mapping.  It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies. Describes trends towards distributed memory architectures and distributed power management; Integrates Network on Chip with distributed, shared memory architectures; Demonstrates novel design methodologies and frameworks for multi-core design space exploration; Shows how midll...

A Heterogeneous Quantum Computer Architecture

NARCIS (Netherlands)

Fu, X.; Riesebos, L.; Lao, L.; Garcia Almudever, C.; Sebastiano, F.; Versluis, R.; Charbon, E.; Bertels, K.

2016-01-01

In this paper, we present a high level view of the heterogeneous quantum computer architecture as any future quantum computer will consist of both a classical and quantum computing part. The classical part is needed for error correction as well as for the execution of algorithms that contain both

MUF architecture /art London

DEFF Research Database (Denmark)

Svenningsen Kajita, Heidi

2009-01-01

Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art......Om MUF architecture samt interview med Liza Fior og Katherine Clarke, partnere i muf architecture/art...

Real-time field programmable gate array architecture for computer vision

Science.gov (United States)

Arias-Estrada, Miguel; Torres-Huitzil, Cesar

2001-01-01

This paper presents an architecture for real-time generic convolution of a mask and an image. The architecture is intended for fast low-level image processing. The field programmable gate array (FPGA)-based architecture takes advantage of the availability of registers in FPGAs to implement an efficient and compact module to process the convolutions. The architecture is designed to minimize the number of accesses to the image memory and it is based on parallel modules with internal pipeline operation in order to improve its performance. The architecture is prototyped in a FPGA, but it can be implemented on dedicated very- large-scale-integrated devices to reach higher clock frequencies. Complexity issues, FPGA resources utilization, FPGA limitations, and real-time performance are discussed. Some results are presented and discussed.

Hospital enterprise Architecture Framework (Study of Iranian University Hospital Organization).

Science.gov (United States)

Haghighathoseini, Atefehsadat; Bobarshad, Hossein; Saghafi, Fatehmeh; Rezaei, Mohammad Sadegh; Bagherzadeh, Nader

2018-06-01

Nowadays developing smart and fast services for patients and transforming hospitals to modern hospitals is considered a necessity. Living in the world inundated with information systems, designing services based on information technology entails a suitable architecture framework. This paper aims to present a localized enterprise architecture framework for the Iranian university hospital. Using two dimensions of implementation and having appropriate characteristics, the best 17 enterprises frameworks were chosen. As part of this effort, five criteria were selected according to experts' inputs. According to these criteria, five frameworks which had the highest rank were chosen. Then 44 general characteristics were extracted from the existing 17 frameworks after careful studying. Then a questionnaire was written accordingly to distinguish the necessity of those characteristics using expert's opinions and Delphi method. The result showed eight important criteria. In the next step, using AHP method, TOGAF was chosen regarding having appropriate characteristics and the ability to be implemented among reference formats. In the next step, enterprise architecture framework was designed by TOGAF in a conceptual model and its layers. For determining architecture framework parts, a questionnaire with 145 questions was written based on literature review and expert's opinions. The results showed during localization of TOGAF for Iran, 111 of 145 parts were chosen and certified to be used in the hospital. The results showed that TOGAF could be suitable for use in the hospital. So, a localized Hospital Enterprise Architecture Modelling is developed by customizing TOGAF for an Iranian hospital at eight levels and 11 parts. This new model could be used to be performed in other Iranian hospitals. Copyright © 2018 Elsevier B.V. All rights reserved.

Architecture, systems research and computational sciences

CERN Document Server

2012-01-01

The Winter 2012 (vol. 14 no. 1) issue of the Nexus Network Journal is dedicated to the theme “Architecture, Systems Research and Computational Sciences”. This is an outgrowth of the session by the same name which took place during the eighth international, interdisciplinary conference “Nexus 2010: Relationships between Architecture and Mathematics, held in Porto, Portugal, in June 2010. Today computer science is an integral part of even strictly historical investigations, such as those concerning the construction of vaults, where the computer is used to survey the existing building, analyse the data and draw the ideal solution. What the papers in this issue make especially evident is that information technology has had an impact at a much deeper level as well: architecture itself can now be considered as a manifestation of information and as a complex system. The issue is completed with other research papers, conference reports and book reviews.

An architectural model for software reliability quantification: sources of data

International Nuclear Information System (INIS)

Smidts, C.; Sova, D.

1999-01-01

Software reliability assessment models in use today treat software as a monolithic block. An aversion towards 'atomic' models seems to exist. These models appear to add complexity to the modeling, to the data collection and seem intrinsically difficult to generalize. In 1997, we introduced an architecturally based software reliability model called FASRE. The model is based on an architecture derived from the requirements which captures both functional and nonfunctional requirements and on a generic classification of functions, attributes and failure modes. The model focuses on evaluation of failure mode probabilities and uses a Bayesian quantification framework. Failure mode probabilities of functions and attributes are propagated to the system level using fault trees. It can incorporate any type of prior information such as results of developers' testing, historical information on a specific functionality and its attributes, and, is ideally suited for reusable software. By building an architecture and deriving its potential failure modes, the model forces early appraisal and understanding of the weaknesses of the software, allows reliability analysis of the structure of the system, provides assessments at a functional level as well as at a systems' level. In order to quantify the probability of failure (or the probability of success) of a specific element of our architecture, data are needed. The term element of the architecture is used here in its broadest sense to mean a single failure mode or a higher level of abstraction such as a function. The paper surveys the potential sources of software reliability data available during software development. Next the mechanisms for incorporating these sources of relevant data to the FASRE model are identified

Symbiotic architecture: Redefinition of recycling design principles

OpenAIRE

Milan Šijaković; Ana Perić

2018-01-01

The study seeks to examine the possibility of implementing the biological concept of symbiosis into the field of architecture for redefining the design principles of architectural recycling. Through an in-depth analysis of the biological concept of symbiosis (i.e., a close and often long-term interaction between two or more different biological species and the criteria that govern the differentiation between symbiotic associations), three redefined design principles of recycling—commensalism,...

Power system data communication architecture at BC Hydro

Energy Technology Data Exchange (ETDEWEB)

Struyk, E.

2001-07-01

Development of a power system data communication architecture (PSDCA) at British Columbia Hydro that enables authorized corporate users to access station-intelligent electronic devices (IEDs) for power system data in non real-time, without compromising the reliability and availability of the real-time SCADA systems, is described. Also discussed is the development of major upgrade initiatives for expanding the use of intelligent electronic devices and remote terminal units (RTUs) which report to the main System Control Centre at Burnaby, BC, and to the four Area Control Centres located throughout the province. The network architecture that incorporates industry standards for PSDCA also provides an opportunity to existing network security systems against electronic threats such as hackers and saboteurs, beyond the simple methods of single or two-level passwords of existing protection control and monitoring equipment systems. The virtual private network (VPN) technology built into the PSDCA will allow secure access to station IED data by corporate users to access their own power data in a secure and reliable fashion. 4 figs.

The Functional Architecture of the Brain Underlies Strategic Deception in Impression Management

OpenAIRE

Qiang Luo; Qiang Luo; Yina Ma; Yina Ma; Meghana A. Bhatt; Meghana A. Bhatt; P. Read Montague; P. Read Montague; P. Read Montague; Jianfeng Feng; Jianfeng Feng; Jianfeng Feng; Jianfeng Feng; Jianfeng Feng

2017-01-01

Impression management, as one of the most essential skills of social function, impacts one's survival and success in human societies. However, the neural architecture underpinning this social skill remains poorly understood. By employing a two-person bargaining game, we exposed three strategies involving distinct cognitive processes for social impression management with different levels of strategic deception. We utilized a novel adaptation of Granger causality accounting for signal-dependent...

Architecture Descriptions. A Contribution to Modeling of Production System Architecture

DEFF Research Database (Denmark)

Jepsen, Allan Dam; Hvam, Lars

a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus...... a diverse set of stakeholder domains and tools in the production system life cycle. To support such activities, a contribution is made to the identification and referencing of production system elements within architecture descriptions as part of the reference architecture framework. The contribution...

Architecture of Gothic Period and Its Effect to Clothing Design

Directory of Open Access Journals (Sweden)

Şerife YILDIZ

2015-08-01

Full Text Available Root of the word Gothic comes from a German tribe which lives in region of the Gotland of Scandinavia. Gothic period is a movement which ends the Midde Age and opens Renaissance. Alth ough seen in all branches of the art, Gothic is widely a style of architecture. Having been originated from the Roman architecture, Gothic Architecture come out in the second half of the 12th century and continued its existence until the half of the 16th c entury when classical architecture come out. In Europe, Gothic painting, sculpture and architecture were dominant and preserved its popularity until the Renaissance. Fashion means all the temporary new styles which come out in a certain period of time with the desires of dressing up, being different, wearing the most desirable. Although seen as two different design field, when we examine closely, we can see that fashion and architecture has many common point from the past to present. As man is the common po int of this two field, they naturally affect each other. Gothic architecture inspired clothing designs, which is enough to show how much they affected each other. In this study, our purpose is to reveal effects of the Gothic architecture on the clothing d esigns. The style used in the Gothic period architecture and models and styles in clothing designs was presented with the help of table of specification. According to this, both fields' sharing common aesthetic concern and same theoritic and ideologic bas e was accompanied by stylistic and structural similarities accordingly. Designers in this two different fields turned even to themselves for inspiration and technical strategy. Environmental and cultural factors affect both fashion designers and architects . When seen as a part of historical process, clothes and buildings with their important cultural and economic conditions are priceless anthropological buildings which show technological developments within the period.

Evolutionary Effect on the Embodied Beauty of Landscape Architectures.

Science.gov (United States)

Zhang, Wei; Tang, Xiaoxiang; He, Xianyou; Chen, Guangyao

2018-01-01

According to the framework of evolutionary aesthetics, a sense of beauty is related to environmental adaptation and plasticity of human beings, which has adaptive value and biological foundations. Prior studies have demonstrated that organisms derive benefits from the landscape. In this study, we investigated whether the benefits of landscape might elicit a stronger sense of beauty and what the nature of this sense of beauty is. In two experiments, when viewing classical landscape and nonlandscape architectures photographs, participants rated the aesthetic scores (Experiment 1) and had a two-alternative forced choice aesthetic judgment by pressing the reaction button located near to (15 cm) or far from (45 cm) the presenting stimuli (Experiment 2). The results showed that reaction of aesthetic ratings for classical landscape architectures was faster than those of classical nonlandscape architectures. Furthermore, only the reaction of beautiful judgment of classical landscape architecture photograph was significantly faster when the reaction button was in the near position to the presenting photograph than those in the position of far away from the presenting photograph. This finding suggests a facilitated effect for the aesthetic perception of classical landscape architectures due to their corresponding components including water and green plants with strong evolutionary implications. Furthermore, this sense of beauty for classical landscape architectures might be the embodied approach to beauty based on the viewpoint of evolutionary aesthetics and embodied cognition.

Sunken garden: remarkable example of Iranian sustainable architecture

Energy Technology Data Exchange (ETDEWEB)

Rezaei, Davood; Toufani, Sargol; Sadegh Falahat, Mohammad [Zanjan University (Iran, Islamic Republic of)], email: d_rezaei@znu.ac.ir, email: sargol2fun@gmail.com, email: safalahat@yahoo.com

2011-07-01

The energy crisis and climate change give new importance to sustainable architecture which reduces the negative impacts that buildings can have on the environment. In ancient times, architects did not have access to modern equipment and had to use natural energies to provide pleasant indoor conditions. Iran has various climatic zones and Iranian traditional architecture relied on a variety of solutions to provide for human comfort. The aim of this study is to present those solutions used in traditional Iranian architecture. This paper presents the use of the energy of the earth depth and other methods such as Syzan, a cellar, Shvadan, pool house, Zmhryr in addition to the sunken garden, which taps geothermal energy by constructing a courtyard lower than street level. This document showed that traditional Iranian architectural strategies are efficient in providing sustainable buildings and could be applied in the design of new construction.

Emerging technology and architecture for big-data analytics

CERN Document Server

Chang, Chip; Yu, Hao

2017-01-01

This book describes the current state of the art in big-data analytics, from a technology and hardware architecture perspective. The presentation is designed to be accessible to a broad audience, with general knowledge of hardware design and some interest in big-data analytics. Coverage includes emerging technology and devices for data-analytics, circuit design for data-analytics, and architecture and algorithms to support data-analytics. Readers will benefit from the realistic context used by the authors, which demonstrates what works, what doesn’t work, and what are the fundamental problems, solutions, upcoming challenges and opportunities. Provides a single-source reference to hardware architectures for big-data analytics; Covers various levels of big-data analytics hardware design abstraction and flow, from device, to circuits and systems; Demonstrates how non-volatile memory (NVM) based hardware platforms can be a viable solution to existing challenges in hardware architecture for big-data analytics.

Architecture and Film

OpenAIRE

Mohammad Javaheri, Saharnaz

2016-01-01

Film does not exist without architecture. In every movie that has ever been made throughout history, the cinematic image of architecture is embedded within the picture. Throughout my studies and research, I began to see that there is no director who can consciously or unconsciously deny the use of architectural elements in his or her movies. Architecture offers a strong profile to distinguish characters and story. In the early days, films were shot in streets surrounde...

An Intelligent Propulsion Control Architecture to Enable More Autonomous Vehicle Operation

Science.gov (United States)

Litt, Jonathan S.; Sowers, T. Shane; Simon, Donald L.; Owen, A. Karl; Rinehart, Aidan W.; Chicatelli, Amy K.; Acheson, Michael J.; Hueschen, Richard M.; Spiers, Christopher W.

2018-01-01

This paper describes an intelligent propulsion control architecture that coordinates with the flight control to reduce the amount of pilot intervention required to operate the vehicle. Objectives of the architecture include the ability to: automatically recognize the aircraft operating state and flight phase; configure engine control to optimize performance with knowledge of engine condition and capability; enhance aircraft performance by coordinating propulsion control with flight control; and recognize off-nominal propulsion situations and to respond to them autonomously. The hierarchical intelligent propulsion system control can be decomposed into a propulsion system level and an individual engine level. The architecture is designed to be flexible to accommodate evolving requirements, adapt to technology improvements, and maintain safety.

On Architectural Acoustics Design using Computer Simulation

DEFF Research Database (Denmark)

Schmidt, Anne Marie Due; Kirkegaard, Poul Henning

2004-01-01

The acoustical quality of a given building, or space within the building, is highly dependent on the architectural design. Architectural acoustics design has in the past been based on simple design rules. However, with a growing complexity in the architectural acoustic and the emergence of potent...... room acoustic simulation programs it is now possible to subjectively analyze and evaluate acoustic properties prior to the actual construction of a facility. With the right tools applied, the acoustic design can become an integrated part of the architectural design process. The aim of the present paper...... this information is discussed. The conclusion of the paper is that the application of acoustical simulation programs is most beneficial in the last of three phases but that an application of the program to the two first phases would be preferable and possible with an improvement of the interface of the program....

A programmable display layer for virtual reality system architectures.

Science.gov (United States)

Smit, Ferdi Alexander; van Liere, Robert; Froehlich, Bernd

2010-01-01

Display systems typically operate at a minimum rate of 60 Hz. However, existing VR-architectures generally produce application updates at a lower rate. Consequently, the display is not updated by the application every display frame. This causes a number of undesirable perceptual artifacts. We describe an architecture that provides a programmable display layer (PDL) in order to generate updated display frames. This replaces the default display behavior of repeating application frames until an update is available. We will show three benefits of the architecture typical to VR. First, smooth motion is provided by generating intermediate display frames by per-pixel depth-image warping using 3D motion fields. Smooth motion eliminates various perceptual artifacts due to judder. Second, we implement fine-grained latency reduction at the display frame level using a synchronized prediction of simulation objects and the viewpoint. This improves the average quality and consistency of latency reduction. Third, a crosstalk reduction algorithm for consecutive display frames is implemented, which improves the quality of stereoscopic images. To evaluate the architecture, we compare image quality and latency to that of a classic level-of-detail approach.

Architectural geometry

KAUST Repository

Pottmann, Helmut

2014-11-26

Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.

Architectural geometry

KAUST Repository

Pottmann, Helmut; Eigensatz, Michael; Vaxman, Amir; Wallner, Johannes

2014-01-01

Around 2005 it became apparent in the geometry processing community that freeform architecture contains many problems of a geometric nature to be solved, and many opportunities for optimization which however require geometric understanding. This area of research, which has been called architectural geometry, meanwhile contains a great wealth of individual contributions which are relevant in various fields. For mathematicians, the relation to discrete differential geometry is significant, in particular the integrable system viewpoint. Besides, new application contexts have become available for quite some old-established concepts. Regarding graphics and geometry processing, architectural geometry yields interesting new questions but also new objects, e.g. replacing meshes by other combinatorial arrangements. Numerical optimization plays a major role but in itself would be powerless without geometric understanding. Summing up, architectural geometry has become a rewarding field of study. We here survey the main directions which have been pursued, we show real projects where geometric considerations have played a role, and we outline open problems which we think are significant for the future development of both theory and practice of architectural geometry.

Elements of Architecture

DEFF Research Database (Denmark)

Elements of Architecture explores new ways of engaging architecture in archaeology. It conceives of architecture both as the physical evidence of past societies and as existing beyond the physical environment, considering how people in the past have not just dwelled in buildings but have existed...

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2014-07-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisation focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means.In this context, this sixth Footprint issue examines the influence of digital means as pragmatic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Agricultural Urbanism in the Context of Landscape Ecological Architecture

Science.gov (United States)

Maltseva, I. N.; Kaganovich, N. N.; Mindiyrova, T. N.

2017-11-01

The article analyzes some of the fundamental aspects of cities sustainable development connected in many respects with the concept of ecological architecture. One of the main concepts of sustainability is considered in detail: the city as an eco-sustainable and balanced system, architectural objects as a full-fledged part of this system, which, most likely, will be determined by one of the directions of this development - the development of landscape architecture as an tool for integration of nature into the urban environment. At the same time, the variety of its functional forms and architectural methods in the system of organization of internal and external space is outlined as well as its interrelation with energy-saving architecture defining them as the two most important components of eco-sustainable development. The development forms of landscape architecture are considered in the review of analogs, as an example (agricultural urbanism object) a thesis on the topic “Vertical Farm Agroindustrial Complex” is presented.

Advanced pixel architectures for scientific image sensors

CERN Document Server

Coath, R; Godbeer, A; Wilson, M; Turchetta, R

2009-01-01

We present recent developments from two projects targeting advanced pixel architectures for scientific applications. Results are reported from FORTIS, a sensor demonstrating variants on a 4T pixel architecture. The variants include differences in pixel and diode size, the in-pixel source follower transistor size and the capacitance of the readout node to optimise for low noise and sensitivity to small amounts of charge. Results are also reported from TPAC, a complex pixel architecture with ~160 transistors per pixel. Both sensors were manufactured in the 0.18μm INMAPS process, which includes a special deep p-well layer and fabrication on a high resistivity epitaxial layer for improved charge collection efficiency.

PICNIC Architecture.

Science.gov (United States)

Saranummi, Niilo

2005-01-01

The PICNIC architecture aims at supporting inter-enterprise integration and the facilitation of collaboration between healthcare organisations. The concept of a Regional Health Economy (RHE) is introduced to illustrate the varying nature of inter-enterprise collaboration between healthcare organisations collaborating in providing health services to citizens and patients in a regional setting. The PICNIC architecture comprises a number of PICNIC IT Services, the interfaces between them and presents a way to assemble these into a functioning Regional Health Care Network meeting the needs and concerns of its stakeholders. The PICNIC architecture is presented through a number of views relevant to different stakeholder groups. The stakeholders of the first view are national and regional health authorities and policy makers. The view describes how the architecture enables the implementation of national and regional health policies, strategies and organisational structures. The stakeholders of the second view, the service viewpoint, are the care providers, health professionals, patients and citizens. The view describes how the architecture supports and enables regional care delivery and process management including continuity of care (shared care) and citizen-centred health services. The stakeholders of the third view, the engineering view, are those that design, build and implement the RHCN. The view comprises four sub views: software engineering, IT services engineering, security and data. The proposed architecture is founded into the main stream of how distributed computing environments are evolving. The architecture is realised using the web services approach. A number of well established technology platforms and generic standards exist that can be used to implement the software components. The software components that are specified in PICNIC are implemented in Open Source.

Making sense of mobile health data: an open architecture to improve individual- and population-level health.

Science.gov (United States)

Chen, Connie; Haddad, David; Selsky, Joshua; Hoffman, Julia E; Kravitz, Richard L; Estrin, Deborah E; Sim, Ida

2012-08-09

Mobile phones and devices, with their constant presence, data connectivity, and multiple intrinsic sensors, can support around-the-clock chronic disease prevention and management that is integrated with daily life. These mobile health (mHealth) devices can produce tremendous amounts of location-rich, real-time, high-frequency data. Unfortunately, these data are often full of bias, noise, variability, and gaps. Robust tools and techniques have not yet been developed to make mHealth data more meaningful to patients and clinicians. To be most useful, health data should be sharable across multiple mHealth applications and connected to electronic health records. The lack of data sharing and dearth of tools and techniques for making sense of health data are critical bottlenecks limiting the impact of mHealth to improve health outcomes. We describe Open mHealth, a nonprofit organization that is building an open software architecture to address these data sharing and "sense-making" bottlenecks. Our architecture consists of open source software modules with well-defined interfaces using a minimal set of common metadata. An initial set of modules, called InfoVis, has been developed for data analysis and visualization. A second set of modules, our Personal Evidence Architecture, will support scientific inferences from mHealth data. These Personal Evidence Architecture modules will include standardized, validated clinical measures to support novel evaluation methods, such as n-of-1 studies. All of Open mHealth's modules are designed to be reusable across multiple applications, disease conditions, and user populations to maximize impact and flexibility. We are also building an open community of developers and health innovators, modeled after the open approach taken in the initial growth of the Internet, to foster meaningful cross-disciplinary collaboration around new tools and techniques. An open mHealth community and architecture will catalyze increased mHealth efficiency

Drawing-Based Procedural Modeling of Chinese Architectures.

Science.gov (United States)

Fei Hou; Yue Qi; Hong Qin

2012-01-01

This paper presents a novel modeling framework to build 3D models of Chinese architectures from elevation drawing. Our algorithm integrates the capability of automatic drawing recognition with powerful procedural modeling to extract production rules from elevation drawing. First, different from the previous symbol-based floor plan recognition, based on the novel concept of repetitive pattern trees, small horizontal repetitive regions of the elevation drawing are clustered in a bottom-up manner to form architectural components with maximum repetition, which collectively serve as building blocks for 3D model generation. Second, to discover the global architectural structure and its components' interdependencies, the components are structured into a shape tree in a top-down subdivision manner and recognized hierarchically at each level of the shape tree based on Markov Random Fields (MRFs). Third, shape grammar rules can be derived to construct 3D semantic model and its possible variations with the help of a 3D component repository. The salient contribution lies in the novel integration of procedural modeling with elevation drawing, with a unique application to Chinese architectures.

Weighted Components of i-Government Enterprise Architecture

Science.gov (United States)

Budiardjo, E. K.; Firmansyah, G.; Hasibuan, Z. A.

2017-01-01

Lack of government performance, among others due to the lack of coordination and communication among government agencies. Whilst, Enterprise Architecture (EA) in the government can be use as a strategic planning tool to improve productivity, efficiency, and effectivity. However, the existence components of Government Enterprise Architecture (GEA) do not show level of importance, that cause difficulty in implementing good e-government for good governance. This study is to explore the weight of GEA components using Principal Component Analysis (PCA) in order to discovered an inherent structure of e-government. The results show that IT governance component of GEA play a major role in the GEA. The rest of components that consist of e-government system, e-government regulation, e-government management, and application key operational, contributed more or less the same. Beside that GEA from other countries analyzes using comparative base on comon enterprise architecture component. These weighted components use to construct i-Government enterprise architecture. and show the relative importance of component in order to established priorities in developing e-government.

Programming parallel architectures: The BLAZE family of languages

Science.gov (United States)

Mehrotra, Piyush

1988-01-01

Programming multiprocessor architectures is a critical research issue. An overview is given of the various approaches to programming these architectures that are currently being explored. It is argued that two of these approaches, interactive programming environments and functional parallel languages, are particularly attractive since they remove much of the burden of exploiting parallel architectures from the user. Also described is recent work by the author in the design of parallel languages. Research on languages for both shared and nonshared memory multiprocessors is described, as well as the relations of this work to other current language research projects.

ADP1 Affects Plant Architecture by Regulating Local Auxin Biosynthesis

Science.gov (United States)

Li, Shibai; Qin, Genji; Novák, Ondřej; Pěnčík, Aleš; Ljung, Karin; Aoyama, Takashi; Liu, Jingjing; Murphy, Angus; Gu, Hongya; Tsuge, Tomohiko; Qu, Li-Jia

2014-01-01

Plant architecture is one of the key factors that affect plant survival and productivity. Plant body structure is established through the iterative initiation and outgrowth of lateral organs, which are derived from the shoot apical meristem and root apical meristem, after embryogenesis. Here we report that ADP1, a putative MATE (multidrug and toxic compound extrusion) transporter, plays an essential role in regulating lateral organ outgrowth, and thus in maintaining normal architecture of Arabidopsis. Elevated expression levels of ADP1 resulted in accelerated plant growth rate, and increased the numbers of axillary branches and flowers. Our molecular and genetic evidence demonstrated that the phenotypes of plants over-expressing ADP1 were caused by reduction of local auxin levels in the meristematic regions. We further discovered that this reduction was probably due to decreased levels of auxin biosynthesis in the local meristematic regions based on the measured reduction in IAA levels and the gene expression data. Simultaneous inactivation of ADP1 and its three closest homologs led to growth retardation, relative reduction of lateral organ number and slightly elevated auxin level. Our results indicated that ADP1-mediated regulation of the local auxin level in meristematic regions is an essential determinant for plant architecture maintenance by restraining the outgrowth of lateral organs. PMID:24391508

Architectural Theatricality

DEFF Research Database (Denmark)

Tvedebrink, Tenna Doktor Olsen

environments and a knowledge gap therefore exists in present hospital designs. Consequently, the purpose of this thesis has been to investigate if any research-based knowledge exist supporting the hypothesis that the interior architectural qualities of eating environments influence patient food intake, health...... and well-being, as well as outline a set of basic design principles ‘predicting’ the future interior architectural qualities of patient eating environments. Methodologically the thesis is based on an explorative study employing an abductive approach and hermeneutic-interpretative strategy utilizing tactics...... and food intake, as well as a series of references exist linking the interior architectural qualities of healthcare environments with the health and wellbeing of patients. On the basis of these findings, the thesis presents the concept of Architectural Theatricality as well as a set of design principles...

Architecture of Institution & Home. Architecture as Cultural Medium

NARCIS (Netherlands)

Robinson, J.W.

2004-01-01

This dissertation addresses how architecture functions as a cultural medium. It does so by by investigating how the architecture of institution and home each construct and support different cultural practices. By studying the design of ordinary settings in terms of how qualitative differences in

On Architectural Qualities and Tactics for Mobile Sensing

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun; Kuhrmann, Marco

2015-01-01

the respective tactics to particular cases illustrating their use in practice. Finally, we provide a preliminary validation of the proposed systematized tactics catalog, which was conducted with student teams. Our preliminary findings show that the tactics are beneficial to provide a guideline and to create...... challenges regarding, e.g., use of battery powered mobile devices, and collection and processing of sensor data. In this paper, we present tactics to address these architecture design challenges. We discuss the two architectural qualities energy efficiency and resource adaptability, and describe them using...... general scenario-generation tables to support the systematic specification of architecture requirements. Furthermore, we develop a catalog of architectural tactics distilled from literature to enable developers to systematically apply proven methods. For each tactic, we provide examples to relate...

On Detailing in Contemporary Architecture

DEFF Research Database (Denmark)

Kristensen, Claus; Kirkegaard, Poul Henning

2010-01-01

Details in architecture have a significant influence on how architecture is experienced. One can touch the materials and analyse the detailing - thus details give valuable information about the architectural scheme as a whole. The absence of perceptual stimulation like details and materiality...... / tactility can blur the meaning of the architecture and turn it into an empty statement. The present paper will outline detailing in contemporary architecture and discuss the issue with respect to architectural quality. Architectural cases considered as sublime piece of architecture will be presented...

Application of ant colony Algorithm and particle swarm optimization in architectural design

Science.gov (United States)

Song, Ziyi; Wu, Yunfa; Song, Jianhua

2018-02-01

By studying the development of ant colony algorithm and particle swarm algorithm, this paper expounds the core idea of the algorithm, explores the combination of algorithm and architectural design, sums up the application rules of intelligent algorithm in architectural design, and combines the characteristics of the two algorithms, obtains the research route and realization way of intelligent algorithm in architecture design. To establish algorithm rules to assist architectural design. Taking intelligent algorithm as the beginning of architectural design research, the authors provide the theory foundation of ant colony Algorithm and particle swarm algorithm in architectural design, popularize the application range of intelligent algorithm in architectural design, and provide a new idea for the architects.

Fast underdetermined BSS architecture design methodology for real time applications.

Science.gov (United States)

Mopuri, Suresh; Reddy, P Sreenivasa; Acharyya, Amit; Naik, Ganesh R

2015-01-01

In this paper, we propose a high speed architecture design methodology for the Under-determined Blind Source Separation (UBSS) algorithm using our recently proposed high speed Discrete Hilbert Transform (DHT) targeting real time applications. In UBSS algorithm, unlike the typical BSS, the number of sensors are less than the number of the sources, which is of more interest in the real time applications. The DHT architecture has been implemented based on sub matrix multiplication method to compute M point DHT, which uses N point architecture recursively and where M is an integer multiples of N. The DHT architecture and state of the art architecture are coded in VHDL for 16 bit word length and ASIC implementation is carried out using UMC 90 - nm technology @V DD = 1V and @ 1MHZ clock frequency. The proposed architecture implementation and experimental comparison results show that the DHT design is two times faster than state of the art architecture.

Structural architecture supports functional organization in the human aging brain at a regionwise and network level.

Science.gov (United States)

Zimmermann, Joelle; Ritter, Petra; Shen, Kelly; Rothmeier, Simon; Schirner, Michael; McIntosh, Anthony R

2016-07-01

Functional interactions in the brain are constrained by the underlying anatomical architecture, and structural and functional networks share network features such as modularity. Accordingly, age-related changes of structural connectivity (SC) may be paralleled by changes in functional connectivity (FC). We provide a detailed qualitative and quantitative characterization of the SC-FC coupling in human aging as inferred from resting-state blood oxygen-level dependent functional magnetic resonance imaging and diffusion-weighted imaging in a sample of 47 adults with an age range of 18-82. We revealed that SC and FC decrease with age across most parts of the brain and there is a distinct age-dependency of regionwise SC-FC coupling and network-level SC-FC relations. A specific pattern of SC-FC coupling predicts age more reliably than does regionwise SC or FC alone (r = 0.73, 95% CI = [0.7093, 0.8522]). Hence, our data propose that regionwise SC-FC coupling can be used to characterize brain changes in aging. Hum Brain Mapp 37:2645-2661, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

A memory-array architecture for computer vision

Energy Technology Data Exchange (ETDEWEB)

Balsara, P.T.

1989-01-01

With the fast advances in the area of computer vision and robotics there is a growing need for machines that can understand images at a very high speed. A conventional von Neumann computer is not suited for this purpose because it takes a tremendous amount of time to solve most typical image processing problems. Exploiting the inherent parallelism present in various vision tasks can significantly reduce the processing time. Fortunately, parallelism is increasingly affordable as hardware gets cheaper. Thus it is now imperative to study computer vision in a parallel processing framework. The author should first design a computational structure which is well suited for a wide range of vision tasks and then develop parallel algorithms which can run efficiently on this structure. Recent advances in VLSI technology have led to several proposals for parallel architectures for computer vision. In this thesis he demonstrates that a memory array architecture with efficient local and global communication capabilities can be used for high speed execution of a wide range of computer vision tasks. This architecture, called the Access Constrained Memory Array Architecture (ACMAA), is efficient for VLSI implementation because of its modular structure, simple interconnect and limited global control. Several parallel vision algorithms have been designed for this architecture. The choice of vision problems demonstrates the versatility of ACMAA for a wide range of vision tasks. These algorithms were simulated on a high level ACMAA simulator running on the Intel iPSC/2 hypercube, a parallel architecture. The results of this simulation are compared with those of sequential algorithms running on a single hypercube node. Details of the ACMAA processor architecture are also presented.

Adapting a compact confocal microscope system to a two-photon excitation fluorescence imaging architecture.

Science.gov (United States)

Diaspro, A; Corosu, M; Ramoino, P; Robello, M

1999-11-01

Within the framework of a national National Institute of Physics of Matter (INFM) project, we have realised a two-photon excitation (TPE) fluorescence microscope based on a new generation commercial confocal scanning head. The core of the architecture is a mode-locked Ti:Sapphire laser (Tsunami 3960, Spectra Physics Inc., Mountain View, CA) pumped by a high-power (5 W, 532 nm) laser (Millennia V, Spectra Physics Inc.) and an ultracompact confocal scanning head, Nikon PCM2000 (Nikon Instruments, Florence, Italy) using a single-pinhole design. Three-dimensional point-spread function has been measured to define spatial resolution performances. The TPE microscope has been used with a wide range of excitable fluorescent molecules (DAPI, Fura-2, Indo-1, DiOC(6)(3), fluoresceine, Texas red) covering a single photon spectral range from UV to green. An example is reported on 3D imaging of the helical structure of the sperm head of the Octopus Eledone cirrhosa labelled with an UV excitable dye, i.e., DAPI. The system can be easily switched for operating both in conventional and two-photon mode. Copyright 1999 Wiley-Liss, Inc.

A Tokenization-Based Communication Architecture for HCE-Enabled NFC Services

Directory of Open Access Journals (Sweden)

Busra Ozdenizci

2016-01-01

Full Text Available Following the announcement of Host Card Emulation (HCE technology, card emulation mode based Near Field Communication (NFC services have gained further appreciation as an enabler of the Cloud-based Secure Element (SE concept. A comprehensive and complete architecture with a centralized and feasible business model for diverse HCE-based NFC services will be highly appreciated, particularly by Service Providers and users. To satisfy the need in this new emerging research area, a Tokenization-based communication architecture for HCE-based NFC services is presented in this paper. Our architecture proposes Two-Phased Tokenization to enable the identity management of both user and Service Provider. NFC Smartphone users can store, manage, and make use of their sensitive data on the Cloud for NFC services; Service Providers can also provide diverse card emulation NFC services easily through the proposed architecture. In this paper, we initially present the Two-Phased Tokenization model and then validate the proposed architecture by providing a case study on access control. We further evaluate the usability aspect in terms of an authentication scheme. We then discuss the ecosystem and business model comprised of the proposed architecture and emphasize the contributions to ecosystem actors. Finally, suggestions are provided for data protection in transit and at rest.

Software architecture for control and data acquisition of linear plasma generator Magnum-PSI

International Nuclear Information System (INIS)

Groen, P.W.C.; Beveren, V. van; Broekema, A.; Busch, P.J.; Genuit, J.W.; Kaas, G.; Poelman, A.J.; Scholten, J.; Zeijlmans van Emmichoven, P.A.

2013-01-01

Highlights: ► An architecture based on a modular design. ► The design offers flexibility and extendability. ► The design covers the overall software architecture. ► It also covers its (sub)systems’ internal structure. -- Abstract: The FOM Institute DIFFER – Dutch Institute for Fundamental Energy Research has completed the construction phase of Magnum-PSI, a magnetized, steady-state, large area, high-flux linear plasma beam generator to study plasma surface interactions under ITER divertor conditions. Magnum-PSI consists of several hardware subsystems, and a variety of diagnostic systems. The COntrol, Data Acquisition and Communication (CODAC) system integrates these subsystems and provides a complete interface for the Magnum-PSI users. Integrating it all, from the lowest hardware level of sensors and actuators, via the level of networked PLCs and computer systems, up to functions and classes in programming languages, demands a sound and modular software architecture, which is extendable and scalable for future changes. This paper describes this architecture, and the modular design of the software subsystems. The design is implemented in the CODAC system at the level of services and subsystems (the overall software architecture), as well as internally in the software subsystems

Trends in Microfabrication Capabilities & Device Architectures.

Energy Technology Data Exchange (ETDEWEB)

Bauer, Todd [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Adam [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lentine, Tony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mudrick, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Okandan, Murat [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rodrigues, Arun [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-06-01

The last two decades have seen an explosion in worldwide R&D, enabling fundamentally new capabilities while at the same time changing the international technology landscape. The advent of technologies for continued miniaturization and electronics feature size reduction, and for architectural innovations, will have many technical, economic, and national security implications. It is important to anticipate possible microelectronics development directions and their implications on US national interests. This report forecasts and assesses trends and directions for several potentially disruptive microfabrication capabilities and device architectures that may emerge in the next 5-10 years.

Systemic Architecture

DEFF Research Database (Denmark)

Poletto, Marco; Pasquero, Claudia

-up or tactical design, behavioural space and the boundary of the natural and the artificial realms within the city and architecture. A new kind of "real-time world-city" is illustrated in the form of an operational design manual for the assemblage of proto-architectures, the incubation of proto-gardens...... and the coding of proto-interfaces. These prototypes of machinic architecture materialize as synthetic hybrids embedded with biological life (proto-gardens), computational power, behavioural responsiveness (cyber-gardens), spatial articulation (coMachines and fibrous structures), remote sensing (FUNclouds...

Speculations on the representation of architecture in virtual reality

DEFF Research Database (Denmark)

Hermund, Anders; Klint, Lars; Bundgård, Ture Slot

2017-01-01

to the visual field of perception. However, this should not necessarily imply an acceptance of the dominance of vision over the other senses, and the much-criticized retinal architecture with its inherent loss of plasticity. Recent neurology studies indicate that 3D representation models in virtual reality...... are less demanding on the brain’s working memory than 3D models seen on flat two-dimensional screens. This paper suggests that virtual reality representational architectural models can, if used correctly, significantly improve the imaginative role of architectural representation....

Digitally-Driven Architecture

Directory of Open Access Journals (Sweden)

Henriette Bier

2010-06-01

Full Text Available The shift from mechanical to digital forces architects to reposition themselves: Architects generate digital information, which can be used not only in designing and fabricating building components but also in embedding behaviours into buildings. This implies that, similar to the way that industrial design and fabrication with its concepts of standardisation and serial production influenced modernist architecture, digital design and fabrication influences contemporary architecture. While standardisa­tion focused on processes of rationalisation of form, mass-customisation as a new paradigm that replaces mass-production, addresses non-standard, complex, and flexible designs. Furthermore, knowledge about the designed object can be encoded in digital data pertaining not just to the geometry of a design but also to its physical or other behaviours within an environment. Digitally-driven architecture implies, therefore, not only digitally-designed and fabricated architecture, it also implies architecture – built form – that can be controlled, actuated, and animated by digital means. In this context, this sixth Footprint issue examines the influence of digital means as prag­matic and conceptual instruments for actuating architecture. The focus is not so much on computer-based systems for the development of architectural designs, but on architecture incorporating digital control, sens­ing, actuating, or other mechanisms that enable buildings to inter­act with their users and surroundings in real time in the real world through physical or sensory change and variation.

Predicting the academic success of architecture students by pre-enrolment requirement: using machine-learning techniques

Directory of Open Access Journals (Sweden)

Ralph Olusola Aluko

2016-12-01

Full Text Available In recent years, there has been an increase in the number of applicants seeking admission into architecture programmes. As expected, prior academic performance (also referred to as pre-enrolment requirement is a major factor considered during the process of selecting applicants. In the present study, machine learning models were used to predict academic success of architecture students based on information provided in prior academic performance. Two modeling techniques, namely K-nearest neighbour (k-NN and linear discriminant analysis were applied in the study. It was found that K-nearest neighbour (k-NN outperforms the linear discriminant analysis model in terms of accuracy. In addition, grades obtained in mathematics (at ordinary level examinations had a significant impact on the academic success of undergraduate architecture students. This paper makes a modest contribution to the ongoing discussion on the relationship between prior academic performance and academic success of undergraduate students by evaluating this proposition. One of the issues that emerges from these findings is that prior academic performance can be used as a predictor of academic success in undergraduate architecture programmes. Overall, the developed k-NN model can serve as a valuable tool during the process of selecting new intakes into undergraduate architecture programmes in Nigeria.

Business process architectures: overview, comparison and framework

Science.gov (United States)

Dijkman, Remco; Vanderfeesten, Irene; Reijers, Hajo A.

2016-02-01

With the uptake of business process modelling in practice, the demand grows for guidelines that lead to consistent and integrated collections of process models. The notion of a business process architecture has been explicitly proposed to address this. This paper provides an overview of the prevailing approaches to design a business process architecture. Furthermore, it includes evaluations of the usability and use of the identified approaches. Finally, it presents a framework for business process architecture design that can be used to develop a concrete architecture. The use and usability were evaluated in two ways. First, a survey was conducted among 39 practitioners, in which the opinion of the practitioners on the use and usefulness of the approaches was evaluated. Second, four case studies were conducted, in which process architectures from practice were analysed to determine the approaches or elements of approaches that were used in their design. Both evaluations showed that practitioners have a preference for using approaches that are based on reference models and approaches that are based on the identification of business functions or business objects. At the same time, the evaluations showed that practitioners use these approaches in combination, rather than selecting a single approach.

Architecture and Stages

DEFF Research Database (Denmark)

Kiib, Hans

2009-01-01

as "experiencescape" - a space between tourism, culture, learning and economy. Strategies related to these challenges involve new architectural concepts and art as ‘engines' for a change. New expressive architecture and old industrial buildings are often combined into hybrid narratives, linking the past...... with the future. But this is not enough. The agenda is to develop architectural spaces, where social interaction and learning are enhanced by art and fun. How can we develop new architectural designs in our inner cities and waterfronts where eventscapes, learning labs and temporal use are merged with everyday...

SABRE: a bio-inspired fault-tolerant electronic architecture

International Nuclear Information System (INIS)

Bremner, P; Samie, M; Dragffy, G; Pipe, A G; Liu, Y; Tempesti, G; Timmis, J; Tyrrell, A M

2013-01-01

As electronic devices become increasingly complex, ensuring their reliable, fault-free operation is becoming correspondingly more challenging. It can be observed that, in spite of their complexity, biological systems are highly reliable and fault tolerant. Hence, we are motivated to take inspiration for biological systems in the design of electronic ones. In SABRE (self-healing cellular architectures for biologically inspired highly reliable electronic systems), we have designed a bio-inspired fault-tolerant hierarchical architecture for this purpose. As in biology, the foundation for the whole system is cellular in nature, with each cell able to detect faults in its operation and trigger intra-cellular or extra-cellular repair as required. At the next level in the hierarchy, arrays of cells are configured and controlled as function units in a transport triggered architecture (TTA), which is able to perform partial-dynamic reconfiguration to rectify problems that cannot be solved at the cellular level. Each TTA is, in turn, part of a larger multi-processor system which employs coarser grain reconfiguration to tolerate faults that cause a processor to fail. In this paper, we describe the details of operation of each layer of the SABRE hierarchy, and how these layers interact to provide a high systemic level of fault tolerance. (paper)

Architecture in Its Own Shadow

Directory of Open Access Journals (Sweden)

Alexander Rappaport

2016-11-01

Full Text Available Those who consider themselves architects disapprove of the statements about destruction of the subject of architectural culture, profession and of the subject of architectural theory. At the same time, a deep crisis of both theory and practice is obvious. When theorists of architecture of the 20th and early 21st centuries turned to the subjects external to architecture – sociology, psychology, semiotics, ecology, post-structuralist criticism, etc., instead of enriching and renovating the architectural theory, the results were just the opposite. A brand new and independent paradigm of architecture is needed. It should contain three parts specific by their logical-subject nature: ontology of architecture, methodology of architectural thought and axiology of architectural thought.

Information Systems’ Portfolio: Contributions of Enterprise and Process Architecture

Directory of Open Access Journals (Sweden)

Silvia Fernandes

2017-09-01

Full Text Available We are witnessing a need for a quick and intelligent reaction from organizations to the level and speed of change in business processes.New information technologies and systems (IT/IS are challenging business models and products. One of the great shakes comes from the online and/or mobile apps and platforms.These are having a tremendous impact in launching innovative and competitive services through the combination of digital and physical features. This leads to actively rethink enterprise information systems’ portfolio, its management and suitability. One relevant way for enterprises to manage their IT/IS in order to cope with those challenges is enterprise and process architecture. A decision-making culture based on processes helps to understand and define the different elements that shape an organization and how those elements inter-relate inside and outside it. IT/IS portfolio management requires an increasing need of modeling data and process flows for better discerning and acting at its selection and alignment with business goals. The new generation of enterprise architecture (NGEA helps to design intelligent processes that answer quickly and creatively to new and challenging trends. This has to be open, agile and context-aware to allow well-designed services that match users’ expectations. This study includes two real cases/problems to solve quickly in companies and solutions are presented in line with this architectural approach.

Vulnerability Model. A Simulation System for Assessing Damage Resulting from Marine Spills

Science.gov (United States)

1975-06-01

C A L R 51117 f ’F L A4U T FMP ).18pr o4 C iiSE.R 5018P FqjPd\\IVf, JýT iO. ilgr-fil C "/.S IJr .020 F L ASHP fII.JI 14 -16! . c IS, 50)21 SPC H~rT...area of 8 squate feet. These com- putations are compiled in Table D-11. Notice, however, that the impulse levels for injury is below the levels for

Architectural analysis of Douglas-fir forests

NARCIS (Netherlands)

Kuiper, L.C.

1994-01-01

The architecture of natural and semi-natural Douglas-fir forest ecosystems in western Washington and western Oregon was analyzed by various case-studies, to yield vital information needed for the design of new silvicultural systems with a high level of biodiversity, intended for low-input

Security Policy for a Generic Space Exploration Communication Network Architecture

Science.gov (United States)

Ivancic, William D.; Sheehe, Charles J.; Vaden, Karl R.

2016-01-01

This document is one of three. It describes various security mechanisms and a security policy profile for a generic space-based communication architecture. Two other documents accompany this document- an Operations Concept (OpsCon) and a communication architecture document. The OpsCon should be read first followed by the security policy profile described by this document and then the architecture document. The overall goal is to design a generic space exploration communication network architecture that is affordable, deployable, maintainable, securable, evolvable, reliable, and adaptable. The architecture should also require limited reconfiguration throughout system development and deployment. System deployment includes subsystem development in a factory setting, system integration in a laboratory setting, launch preparation, launch, and deployment and operation in space.

Low-Level Space Optimization of an AES Implementation for a Bit-Serial Fully Pipelined Architecture

Science.gov (United States)

Weber, Raphael; Rettberg, Achim

A previously developed AES (Advanced Encryption Standard) implementation is optimized and described in this paper. The special architecture for which this implementation is targeted comprises synchronous and systematic bit-serial processing without a central controlling instance. In order to shrink the design in terms of logic utilization we deeply analyzed the architecture and the AES implementation to identify the most costly logic elements. We propose to merge certain parts of the logic to achieve better area efficiency. The approach was integrated into an existing synthesis tool which we used to produce synthesizable VHDL code. For testing purposes, we simulated the generated VHDL code and ran tests on an FPGA board.

A PROPOSED MAPPING ARCHITECTURE BETWEEN IAX AND JINGLE PROTOCOLS

Directory of Open Access Journals (Sweden)

Hadeel Saleh Haj Aliwi

2016-03-01

Full Text Available Nowadays, multimedia communication has improved rapidly to allow people to communicate via the Internet. However, Internet users cannot communicate with each other unless they use the same chatting applications since each chatting application uses a certain signaling protocol to make the media call. The mapping architecture is a very critical issue since it solves the communication problems between any two protocols, as well as it enables people around the world to make a voice/video call even if they use different chatting applications. Providing the interoperability between different signaling protocols and multimedia applications takes the advantages of more than one protocol. Many mapping architectures have been proposed to ease exchanging the media between at least two users without facing any difficulties such as SIP-Jingle, IAX-RSW, H.323-MGCP, etc. However, the design of any of the existing mapping architectures has some weaknesses related to larger delay, time consuming, and security matters. The only way to overcome these problems is to propose an efficient mapping architecture. This paper proposed a new mapping architecture between Inter-Asterisk eXchange Protocol and Jingle Protocol. The proposed mapping architecture consists of IAX domain (IAX client, IAX server, IAX-to-Jingle gateway, and Jingle domain (Jingle client, Jingle server, Jingle-to-IAX gateway. The tasks of the translation gateways are represented by the URI conversion, media capability exchange, translator of call setup and teardown signals, and real time media transmission.

Architectural technology

DEFF Research Database (Denmark)

2005-01-01

The booklet offers an overall introduction to the Institute of Architectural Technology and its projects and activities, and an invitation to the reader to contact the institute or the individual researcher for further information. The research, which takes place at the Institute of Architectural...... Technology at the Roayl Danish Academy of Fine Arts, School of Architecture, reflects a spread between strategic, goal-oriented pilot projects, commissioned by a ministry, a fund or a private company, and on the other hand projects which originate from strong personal interests and enthusiasm of individual...

Humanizing Architecture

DEFF Research Database (Denmark)

Toft, Tanya Søndergaard

2015-01-01

The article proposes the urban digital gallery as an opportunity to explore the relationship between ‘human’ and ‘technology,’ through the programming of media architecture. It takes a curatorial perspective when proposing an ontological shift from considering media facades as visual spectacles...... agency and a sense of being by way of dematerializing architecture. This is achieved by way of programming the symbolic to provide new emotional realizations and situations of enlightenment in the public audience. This reflects a greater potential to humanize the digital in media architecture....

Robotic architectures

CSIR Research Space (South Africa)

Mtshali, M

2010-01-01

Full Text Available In the development of mobile robotic systems, a robotic architecture plays a crucial role in interconnecting all the sub-systems and controlling the system. The design of robotic architectures for mobile autonomous robots is a challenging...

Developing Distributed System With Service Resource Oriented Architecture

Directory of Open Access Journals (Sweden)

Hermawan Hermawan

2012-06-01

Full Text Available Service Oriented Architecture is a design paradigm in software engineering with which a distributed system is built for an enterprise. This paradigm aims at providing the system as a service through a protocol in web service technology, namely Simple Object Access Protocol (SOAP. However, SOA is service level agreements of webservice. For this reason, this reasearch aims at combining SOA with Resource Oriented Architecture in order to expand scalability of services. This combination creates Sevice Resource Oriented Architecture (SROA with which a distributed system is developed that integrates services within project management software. Following this design, the software is developed according to a framework of Agile Model Driven Development which can reduce complexities of the whole process of software development.

Application architecture for .NET designing applications and services

CERN Document Server

Microsoft. Redmond

2003-01-01

Get expert architectural and design-level guidance for building distributed solutions with the Microsoft® .NET Framework-learning how to synthesize your knowledge of application development, servers, and infrastructure and business requirements. This guide assumes you are familiar with .NET component development and the basic principles of a layered distributed application design. It examines architectural issues and solution design for a range of project stakeholders-whether you build and design applications and services, recommend appropriate technologies and products for applications and s

Architecture Sustainability