WorldWideScience

Sample records for two-dimensional plasmonic structures

  1. Terahertz spectroscopy of two-dimensional subwavelength plasmonic structures

    Energy Technology Data Exchange (ETDEWEB)

    Azad, Abul K [Los Alamos National Laboratory; Chen, Houtong [Los Alamos National Laboratory; Taylor, Antoinette [Los Alamos National Laboratory; O' Hara, John F [Los Alamos National Laboratory; Han, Jiaguang [OSU; Lu, Xinchao [OSU; Zhang, Weili [OSU

    2009-01-01

    The fascinating properties of plasmonic structures have had significant impact on the development of next generation ultracompact photonic and optoelectronic components. We study two-dimensional plasmonic structures functioning at terahertz frequencies. Resonant terahertz response due to surface plasmons and dipole localized surface plasmons were investigated by the state-of-the-art terahertz time domain spectroscopy (THz-TDS) using both transmission and reflection configurations. Extraordinary terahertz transmission was demonstrated through the subwavelength metallic hole arrays made from good conducting metals as well as poor metals. Metallic arrays m!lde from Pb, generally a poor metal, and having optically thin thicknesses less than one-third of a skin depth also contributed in enhanced THz transmission. A direct transition of a surface plasmon resonance from a photonic crystal minimum was observed in a photo-doped semiconductor array. Electrical controls of the surface plasmon resonances by hybridization of the Schottkey diode between the metallic grating and the semiconductor substrate are investigated as a function of the applied reverse bias. In addition, we have demonstrated photo-induced creation and annihilation of surface plasmons with appropriate semiconductors at room temperature. According to the Fano model, the transmission properties are characterized by two essential contributions: resonant excitation of surface plasmons and nonresonant direct transmission. Such plasmonic structures may find fascinating applications in terahertz imaging, biomedical sensing, subwavelength terahertz spectroscopy, tunable filters, and integrated terahertz devices.

  2. Surface Plasmon Polaritons of Two-Dimensional Three-Order Dendritic Structures

    Institute of Scientific and Technical Information of China (English)

    王敏凤; 周鲁卫

    2011-01-01

    We study surface plasmon polaritons excited on two-dimensional three-order dendritic structures. Previous studies show that split ring resonators (SRRs) can be used to obtain magnetic resonance, thus sustairdng surface waves behaving like surface plasmon polaritons (SPPs). In this paper, we obtain detailed results on surface plasmon polaritons of several different grating structures and theoretically prove that this kind of structures can sustain SPPs. Besides, since dendritic structures can be fabricated by double template-assisted electrochemical deposition, it is worth noting that fabrication of SPP-based materials might be much easier.

  3. Two Dimensional Plasmonic Cavities on Moire Surfaces

    Science.gov (United States)

    Balci, Sinan; Kocabas, Askin; Karabiyik, Mustafa; Kocabas, Coskun; Aydinli, Atilla

    2010-03-01

    We investigate surface plasmon polariton (SPP) cavitiy modes on two dimensional Moire surfaces in the visible spectrum. Two dimensional hexagonal Moire surface can be recorded on a photoresist layer using Interference lithography (IL). Two sequential exposures at slightly different angles in IL generate one dimensional Moire surfaces. Further sequential exposure for the same sample at slightly different angles after turning the sample 60 degrees around its own axis generates two dimensional hexagonal Moire cavity. Spectroscopic reflection measurements have shown plasmonic band gaps and cavity states at all the azimuthal angles (omnidirectional cavity and band gap formation) investigated. The plasmonic band gap edge and the cavity states energies show six fold symmetry on the two dimensional Moire surface as measured in reflection measurements.

  4. Fabrication of two-dimensional visible wavelength nanoscale plasmonic structures using hydrogen silsesquioxane based resist

    Science.gov (United States)

    Smith, Kyle Z.; Gadde, Akshitha; Kadiyala, Anand; Dawson, Jeremy M.

    2016-03-01

    In recent years, the global market for biosensors has continued to increase in combination with their expanding use in areas such as biodefense/detection, home diagnostics, biometric identification, etc. A constant necessity for inexpensive, portable bio-sensing methods, while still remaining simple to understand and operate, is the motivation behind novel concepts and designs. Labeled visible spectrum bio-sensing systems provide instant feedback that is both simple and easy to work with, but are limited by the light intensity thresholds required by the imaging systems. In comparison, label-free bio-sensing systems and other detection modalities like electrochemical, frequency resonance, thermal change, etc., can require additional technical processing steps to convey the final result, increasing the system's complexity and possibly the time required for analysis. Further decrease in the detection limit can be achieved through the addition of plasmonic structures into labeled bio-sensing systems. Nano-structures that operate in the visible spectrum have feature sizes typically in the order of the operating wavelength, calling for high aspect ratio nanoscale fabrication capabilities. In order to achieve these dimensions, electron beam lithography (EBL) is used due to its accurate feature production. Hydrogen silsesquioxane (HSQ) based electron beam resist is chosen for one of its benefits, which is after exposure to oxygen plasma, the patterned resist cures into silicon dioxide (SiO2). These cured features in conjunction with nanoscale gold particles help in producing a high electric field through dipole generation. In this work, a detailed process flow of the fabrication of square lattice of plasmonic structures comprising of gold coated silicon dioxide pillars designed to operate at 560 nm wavelength and produce an intensity increase of roughly 100 percent will be presented.

  5. Two-dimensional subwavelength plasmonic lattice solitons

    CERN Document Server

    Ye, F; Hu, B; Panoiu, N C

    2010-01-01

    We present a theoretical study of plasmonic lattice solitons (PLSs) formed in two-dimensional (2D) arrays of metallic nanowires embedded into a nonlinear medium with Kerr nonlinearity. We analyze two classes of 2D PLSs families, namely, fundamental and vortical PLSs in both focusing and defocusing media. Their existence, stability, and subwavelength spatial confinement are studied in detai

  6. Inducing an Incipient Terahertz Finite Plasmonic Crystal in Coupled Two Dimensional Plasmonic Cavities

    CERN Document Server

    Dyer, Gregory C; Preu, Sascha; Vinh, N Q; Allen, S James; Reno, John L; Shaner, Eric A

    2016-01-01

    We measured a change in the current transport of an antenna-coupled, multi-gate, GaAs/AlGaAs field-effect transistor when terahertz electromagnetic waves irradiated the transistor and attribute the change to bolometric heating of the electrons in the two-dimensional electron channel. The observed terahertz absorption spectrum indicates coherence between plasmons excited under adjacent biased device gates. The experimental results agree quantitatively with a theoretical model we developed that is based on a generalized plasmonic transmission line formalism and describes an evolution of the plasmonic spectrum with increasing electron density modulation from homogeneous to the crystal limit. These results demonstrate an electronically induced and dynamically tunable plasmonic band structure.

  7. Two-Dimensional Plasmonics in Massive and Massless Electron Gases

    Science.gov (United States)

    Yoon, Hosang

    Plasmonic waves in solid-state are caused by collective oscillation of mobile charges inside or at the surface of conductors. In particular, surface plasmonic waves propagating at the skin of metals have recently attracted interest, as they reduce the wavelength of electromagnetic waves coupled to them by up to ˜10 times, allowing one to create miniaturized wave devices at optical frequencies. In contrast, plasmonic waves on two-dimensional (2D) conductors appear at much lower infrared and THz-GHz frequencies, near or in the electronics regime, and can achieve far stronger wavelength reduction factor reaching well above 100. In this thesis, we study the unique machinery of 2D plasmonic waves behind this ultra-subwavelength confinement and explore how it can be used to create various interesting devices. To this end, we first develop a physically intuitive theoretical formulation of 2D plasmonic waves, whose two main components---the Coulomb restoration force and inertia of the collectively oscillating charges---are combined into a transmission-line-like model. We then use this formulation to create various ultra-subwavelength 2D plasmonic devices. For the 2D conductor, we first choose GaAs/AlGaAs heterostructure---a 2D electron gas consisting of massive (m* > 0) electrons---demonstrating plasmonic bandgap crystals, interferometers, and negatively refracting metamaterials. We then examine a 2D plasmonic device based on graphene, a 2D electron gas consisting of effectively massless (m* = 0) electrons. We theoretically show and experimentally demonstrate that the massless electrons in graphene can surprisingly exhibit a collective mass when subjected to a collective excitation, providing the inertia that is essential for the propagation of 2D plasmonic waves. Lastly, we theoretically investigate the thermal current fluctuation behaviors in massive and massless electron gases. While seemingly unrelated on first sight, we show that the thermal current fluctuation is

  8. The micro-cavity of the two dimensional plasmonic photonic crystal

    Science.gov (United States)

    Tong, Kai; Zhang, Zhenguo; Yang, Qing

    2015-02-01

    In this manuscript, we proposed a novel and effective two dimensional hybrid plasmonic photonic crystal micro-cavity structure to confine the surface plasmon to a sub-wavelength scale mode volume and obtain a relatively high quality factor. By introducing a single-cell defect at the two dimensional triangular lattice photonic crystal layer, the defect cavity has been established to provide sub-wavelength scale plasmonic mode localization within the hybrid plasmonic photonic crystal structure TM band gap. Comprehensive analysis methods of three-dimensional finite difference time domain method (3D-FDTD) have been used to analyze the characteristics of the micro-cavity of this hybrid structure, including the effects of the radius of the nearest neighbor air holes around the defect, the cavity length of the defect and the thickness of the gain medium on the features of the micro-cavity. By using a quantum dots (QDs)-polymer as a gain medium for the low index thin layer, a gain threshold as low as gth = 534 cm-1 can be achieved with such structures, and deep sub-wavelength mode volume of 0.00201 (λ/n)3 is also obtained.

  9. Hybrid nanostructures of metal/two-dimensional nanomaterials for plasmon-enhanced applications.

    Science.gov (United States)

    Li, Xuanhua; Zhu, Jinmeng; Wei, Bingqing

    2016-06-07

    Hybrid nanostructures composed of graphene or other two-dimensional (2D) nanomaterials and plasmonic metal components have been extensively studied. The unusual properties of 2D materials are associated with their atomically thin thickness and 2D morphology, and many impressive structures enable the metal nanomaterials to establish various interesting hybrid nanostructures with outstanding plasmonic properties. In addition, the hybrid nanostructures display unique optical characteristics that are derived from the close conjunction of plasmonic optical effects and the unique physicochemical properties of 2D materials. More importantly, the hybrid nanostructures show several plasmonic electrical effects including an improved photogeneration rate, efficient carrier transfer, and a plasmon-induced "hot carrier", playing a significant role in enhancing device performance. They have been widely studied for plasmon-enhanced optical signals, photocatalysis, photodetectors (PDs), and solar cells. In this review, the developments in the field of metal/2D hybrid nanostructures are comprehensively described. Preparation of hybrid nanostructures is first presented according to the 2D material type, as well as the metal nanomaterial morphology. The plasmonic properties and the enabled applications of the hybrid nanostructures are then described. Lastly, possible future research in this promising field is discussed.

  10. Universal description of channel plasmons in two-dimensional materials

    DEFF Research Database (Denmark)

    Gonçalves, P. A. D.; Bozhevolnyi, Sergey I.; Mortensen, N. Asger

    2017-01-01

    Channeling surface plasmon-polaritons to control their propagation direction is of the utmost importance for future optoelectronic devices. Here, we develop an effective-index method to describe and characterize the properties of 2D material's channel plasmon-polaritons (CPPs) guided along a V......-shaped channel. Focusing on the case of graphene, we derive a universal Schr\\"odinger-like equation from which one can determine the dispersion relation of graphene CPPs and corresponding field distributions at any given frequency, since they depend on the geometry of the structure alone. The results...... are then compared against more rigorous theories, having obtained a very good agreement. Our calculations show that CPPs in graphene and other 2D materials are attractive candidates to achieve deep subwavelength waveguiding of light, holding potential as active components for the next generation of tunable photonic...

  11. Plasmon spectra in two-dimensional nanorod arrays

    Energy Technology Data Exchange (ETDEWEB)

    Nie, Z H; Fava, D; Kumacheva, E [Department of Chemistry, University of Toronto, Toronto, Ontario, M5S 3H6 (Canada); Ruda, H E; Shik, A [Centre for Advanced Nanotechnology, University of Toronto, Toronto, Ontario, M5S 3E4 (Canada)

    2009-07-22

    For various types of ensembles of metal nanorods, the frequencies of longitudinal and transverse plasmons were calculated and correlations between the plasmon frequency shifts and the topology of nanorod arrays were found. The theoretical predictions were compared with the experimentally determined optical absorption in arrays of polymer-terminated Au nanorods obtained by self-assembly in selective solvents.

  12. Spatial dispersion in two-dimensional plasmonic crystals: Large blueshifts promoted by diffraction anomalies

    DEFF Research Database (Denmark)

    David, Christin; Christensen, Johan; Mortensen, N. Asger

    2016-01-01

    We develop a methodology to incorporate nonlocal optical response of the free electron gas due to quantum-interaction effects in metal components of periodic two-dimensional plasmonic crystals and study the impact of spatial dispersion on promising building blocks for photonic circuits. Within th...... at normal incidence and the surprisingly large structural parameters at which finite blueshifts are observable, which we attribute to diffraction that offers nonvanishing in-plane wave vector components and increases the penetration depth of longitudinal (nonlocal) modes....

  13. Carrier plasmon induced nonlinear band gap renormalization in two-dimensional semiconductors.

    Science.gov (United States)

    Liang, Yufeng; Yang, Li

    2015-02-13

    In reduced-dimensional semiconductors, doping-induced carrier plasmons can strongly couple with quasiparticle excitations, leading to a significant band gap renormalization. However, the physical origin of this generic effect remains obscure. We develop a new plasmon-pole theory that efficiently and accurately captures this coupling. Using monolayer MoS(2) and MoSe(2) as prototype two-dimensional (2D) semiconductors, we reveal a striking band gap renormalization above 400 meV and an unusual nonlinear evolution of their band gaps with doping. This prediction significantly differs from the linear behavior that is observed in one-dimensional structures. Notably, our predicted band gap renormalization for MoSe(2) is in excellent agreement with recent experimental results. Our developed approach allows for a quantitative understanding of many-body interactions in general doped 2D semiconductors and paves the way for novel band gap engineering techniques.

  14. Dynamical Mechanism of Two-Dimensional Plasmon Launching by Swift Electrons

    CERN Document Server

    Lin, Xiao; Gao, Fei; Kaminer, Ido; Yang, Zhaoju; Gao, Zhen; Buljan, Hrvoje; Joannopoulos, John D; Soljačić, Marin; Chen, Hongsheng; Zhang, Baile

    2015-01-01

    Launching of surface plasmons by swift electrons has long been utilized to investigate plasmonic properties of ultrathin, or two-dimensional (2D), electron systems, including graphene plasmons recently. However, spatio-temporal dynamics of this process has never been clearly revealed. This is because the impact of an electron will generate not only plasmons, but also photons, demanding both space and time. Here we address this issue within the framework of classical electromagnetics by showing the dynamical process of 2D plasmon launching by swift electrons on graphene. The launching of 2D plasmons on graphene is not immediate, but is delayed after a hydrodynamic splashing-like process, which occurs during the formation time of transition radiation caused by the electron's impact. This newly revealed process also implies that all previous estimates on the yields of graphene plasmons in electron-energy-loss-spectroscopy have been overestimated.

  15. Quasi-periodic distribution of plasmon modes in two-dimensional Fibonacci arrays of metal nanoparticles.

    Science.gov (United States)

    Dallapiccola, Ramona; Gopinath, Ashwin; Stellacci, Francesco; Dal Negro, Luca

    2008-04-14

    In this paper we investigate for the first time the near-field optical behavior of two-dimensional Fibonacci plasmonic lattices fabricated by electron-beam lithography on transparent quartz substrates. In particular, by performing near-field optical microscopy measurements and three dimensional Finite Difference Time Domain simulations we demonstrate that near-field coupling of nanoparticle dimers in Fibonacci arrays results in a quasi-periodic lattice of localized nanoparticle plasmons. The possibility to accurately predict the spatial distribution of enhanced localized plasmon modes in quasi-periodic Fibonacci arrays can have a significant impact for the design and fabrication of novel nano-plasmonics devices.

  16. Spatial dispersion in two-dimensional plasmonic crystals: Large blueshifts promoted by diffraction anomalies

    Science.gov (United States)

    David, Christin; Christensen, Johan; Mortensen, N. Asger

    2016-10-01

    We develop a methodology to incorporate nonlocal optical response of the free electron gas due to quantum-interaction effects in metal components of periodic two-dimensional plasmonic crystals and study the impact of spatial dispersion on promising building blocks for photonic circuits. Within the framework of the hydrodynamic model, we observe significant changes with respect to the commonly employed local-response approximation, but also in comparison with homogeneous metal films where nonlocal effects have previously been considered. Notable are the emergence of a contribution from nonlocality at normal incidence and the surprisingly large structural parameters at which finite blueshifts are observable, which we attribute to diffraction that offers nonvanishing in-plane wave vector components and increases the penetration depth of longitudinal (nonlocal) modes.

  17. Metal Nanoparticle-Decorated Two-Dimensional Molybdenum Sulfide for Plasmonic-Enhanced Polymer Photovoltaic Devices

    Directory of Open Access Journals (Sweden)

    Ming-Kai Chuang

    2015-08-01

    Full Text Available Atomically thin two-dimensional (2D transition metal dichalcogenides have also attracted immense interest because they exhibit appealing electronic, optical and mechanical properties. In this work, we prepared gold nanoparticle-decorated molybdenum sulfide (AuNP@MoS2 through a simple spontaneous redox reaction. Transmission electron microscopy, UV-Vis spectroscopy, and Raman spectroscopy were used to characterize the properties of the AuNP@MoS2 nanomaterials. Then we employed such nanocomposites as the cathode buffer layers of organic photovoltaic devices (OPVs to trigger surface plasmonic resonance, leading to noticeable enhancements in overall device efficiencies. We attribute the primary origin of the improvement in device performance to local field enhancement induced by the effects of localized surface plasmonic resonance. Our results suggest that the metal nanoparticle-decorated two-dimensional materials appear to have great potential for use in high-performance OPVs.

  18. Numerical investigation of optical Tamm states in two-dimensional hybrid plasmonic-photonic crystal nanobeams

    Science.gov (United States)

    Meng, Zi-Ming; Hu, Yi-Hua; Ju, Gui-Fang; Zhong, Xiao-Lan; Ding, Wei; Li, Zhi-Yuan

    2014-07-01

    Optical Tamm states (OTSs) in analogy with its electronic counterpart confined at the surface of crystals are optical surface modes at the interfaces between uniform metallic films and distributed Bragg reflectors. In this paper, OTSs are numerically investigated in two-dimensional hybrid plasmonic-photonic crystal nanobeams (HPPCN), which are constructed by inserting a metallic nanoparticle into a photonic crystal nanobeam formed by periodically etching square air holes into dielectric waveguides. The evidences of OTSs can be verified by transmission spectra and the field distribution at resonant frequency. Similar to OTSs in one-dimensional multilayer structures OTSs in HPPCN can be excited by both TE and TM polarization. The physical origin of OTSs in HPPCN is due to the combined contribution of strong reflection imposed by the photonic band gap (PBG) of the photonic crystal (PC) nanobeam and strong backward scattering exerted by the nanoparticle. For TE, incidence OTSs can be obtained at the frequency near the center of the photonic band gap. The transmissivity and the resonant frequency can be finely tuned by the dimension of nanoparticles. While for TM incidence OTSs are observed for relatively larger metallic nanoparticles compared with TE polarization. The differences between TE and TM polarization can be explained by two reasons. For one reason stronger backward scattering of nanoparticles for TE polarization can be achieved by the excitation of localized surface plasmon polariton of nanoparticles. This assumption has been proved by examining the scattering, absorption, and extinction cross section of the metallic nanoparticle. The other can be attributed to the deep and wide PBG available for TE polarization with less number of air holes compared with TM polarization. Our results show great promise in extending the application scope of OTSs from one-dimensional structures to practical integrated photonic devices and circuits.

  19. Bandwidth control of wavelength-selective uncooled infrared sensors using two-dimensional plasmonic absorbers

    Science.gov (United States)

    Ogawa, Shinpei; Fujisawa, Daisuke; Kimata, Masafumi

    2016-05-01

    Although standard uncooled infrared (IR) sensors can be used to record information such as the shape, position, and average radiant intensity of objects, these devices cannot capture color (that is, wavelength) data. Achieving wavelength selectivity would pave the way for the development of advanced uncooled IR sensors capable of providing color information as well as multi-color image sensors that would have significant advantages in applications such as fire detection, gas analysis, hazardous material recognition, and biological analysis. We have previously demonstrated an uncooled IR sensor incorporating a two-dimensional plasmonic absorber (2D PLA) that exhibits wavelength selectivity over a wide range in the mid- and long-IR regions. This PLA has a 2D Au-based periodic array of dimples, in which surface plasmon modes are induced and wavelength-selective absorption occurs. However, the dependence of the absorption bandwidth on certain structural parameters has yet to be clarified. The bandwidth of such devices is a vital factor when considering the practical application of these sensors to tasks such as gas detection. In the present study, control of the bandwidth was theoretically investigated using a rigorous coupled wave analysis approach. It is demonstrated that the dimple sidewall structure has a significant impact on the bandwidth and can be used to control both narrow- and broadband absorption. Increasing the sidewall slope was found to decrease the bandwidth due to suppression of cavity-mode resonance in the depth direction of the dimples. These results will contribute to the development of high-resolution, wavelength-selective uncooled IR sensors.

  20. Numerical investigation of optical Tamm states in two-dimensional hybrid plasmonic-photonic crystal nanobeams

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Zi-Ming, E-mail: mengzm@gdut.edu.cn, E-mail: lizy@aphy.iphy.ac.cn; Hu, Yi-Hua; Ju, Gui-Fang [School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006 (China); Zhong, Xiao-Lan; Ding, Wei; Li, Zhi-Yuan, E-mail: mengzm@gdut.edu.cn, E-mail: lizy@aphy.iphy.ac.cn [Laboratory of Optical Physics, Institute of Physics, Chinese Academy of Sciences, P.O. Box 603, Beijing 100190 (China)

    2014-07-28

    Optical Tamm states (OTSs) in analogy with its electronic counterpart confined at the surface of crystals are optical surface modes at the interfaces between uniform metallic films and distributed Bragg reflectors. In this paper, OTSs are numerically investigated in two-dimensional hybrid plasmonic-photonic crystal nanobeams (HPPCN), which are constructed by inserting a metallic nanoparticle into a photonic crystal nanobeam formed by periodically etching square air holes into dielectric waveguides. The evidences of OTSs can be verified by transmission spectra and the field distribution at resonant frequency. Similar to OTSs in one-dimensional multilayer structures OTSs in HPPCN can be excited by both TE and TM polarization. The physical origin of OTSs in HPPCN is due to the combined contribution of strong reflection imposed by the photonic band gap (PBG) of the photonic crystal (PC) nanobeam and strong backward scattering exerted by the nanoparticle. For TE, incidence OTSs can be obtained at the frequency near the center of the photonic band gap. The transmissivity and the resonant frequency can be finely tuned by the dimension of nanoparticles. While for TM incidence OTSs are observed for relatively larger metallic nanoparticles compared with TE polarization. The differences between TE and TM polarization can be explained by two reasons. For one reason stronger backward scattering of nanoparticles for TE polarization can be achieved by the excitation of localized surface plasmon polariton of nanoparticles. This assumption has been proved by examining the scattering, absorption, and extinction cross section of the metallic nanoparticle. The other can be attributed to the deep and wide PBG available for TE polarization with less number of air holes compared with TM polarization. Our results show great promise in extending the application scope of OTSs from one-dimensional structures to practical integrated photonic devices and circuits.

  1. Two-Dimensionally-Modulated, Magnetic Structure of Neodymium Metal

    DEFF Research Database (Denmark)

    Lebech, Bente; Bak, P.

    1979-01-01

    The incipient magnetic order of dhcp Nd is described by a two-dimensional, incommensurably modulated structure ("triple-q" structure). The ordering is accompanied by a lattice distortion that forms a similar pattern....

  2. Epsilon-near-zero behavior from plasmonic Dirac point: Theory and realization using two-dimensional materials

    Science.gov (United States)

    Mattheakis, Marios; Valagiannopoulos, Constantinos A.; Kaxiras, Efthimios

    2016-11-01

    The electromagnetic response of a two-dimensional metal embedded in a periodic array of a dielectric host can give rise to a plasmonic Dirac point that emulates epsilon-near-zero (ENZ) behavior. This theoretical result is extremely sensitive to structural features like periodicity of the dielectric medium and thickness imperfections. We propose that such a device can actually be realized by using graphene as the two-dimensional metal and materials like the layered semiconducting transition-metal dichalcogenides or hexagonal boron nitride as the dielectric host. We propose a systematic approach, in terms of design characteristics, for constructing metamaterials with linear, elliptical, and hyperbolic dispersion relations which produce ENZ behavior, normal or negative diffraction.

  3. Surface plasmon sensor with gold film deposited on a two-dimensional colloidal crystal

    Science.gov (United States)

    Li, Yuanyuan; Sun, Jie; Wang, Li; Zhan, Peng; Cao, Zhishen; Wang, Zhenlin

    2008-08-01

    A sensor based on surface plasmon resonance (SPR) of plasmonic crystals fabricated via a colloidal-crystal-assisted templating method is studied. Plasmonic crystals are prepared by depositing a thin gold (Au) layer onto a two-dimensional array of polystyrene spheres self-assembled on a quartz substrate. The enhanced transmission as a result of the SPR of Au plasmonic crystals, which are immersed in different ambient liquids, are measured and compared with that of polystyrene (PS) microsphere templates of different sizes, both before and after removal of Au nanoprisms formed on the quartz substrate through pores among the spheres. It is found that the measured sensitivities exhibit a linear dependence on the refractive index of the surrounding medium and are linked to coupling effects between SPRs on the corrugated Au film and nanoislands. The feasibility of the SPR system in molecular monolayer detection is further demonstrated through a formation of alkanethiolate self-assembled monolayers on the Au film surface, which causes a 4 nm red-shift of the main SPR.

  4. Two-Dimensional Bipyramid Plasmonic Nanoparticle Liquid Crystalline Superstructure with Four Distinct Orientational Packing Orders.

    Science.gov (United States)

    Shi, Qianqian; Si, Kae Jye; Sikdar, Debabrata; Yap, Lim Wei; Premaratne, Malin; Cheng, Wenlong

    2016-01-26

    Anisotropic plasmonic nanoparticles have been successfully used as constituent elements for growing ordered nanoparticle arrays. However, orientational control over their spatial ordering remains challenging. Here, we report on a self-assembled two-dimensional (2D) nanoparticle liquid crystalline superstructure (NLCS) from bipyramid gold nanoparticles (BNPs), which showed four distinct orientational packing orders, corresponding to horizontal alignment (H-NLCS), circular arrangement (C-NLCS), slanted alignment (S-NLCS), and vertical alignment (V-NLCS) of constituent particle building elements. These packing orders are characteristic of the unique shape of BNPs because all four packing modes were observed for particles with various sizes. Nevertheless, only H-NLCS and V-NLCS packing orders were observed for the free-standing ordered array nanosheets formed from a drying-mediated self-assembly at the air/water interface of a sessile droplet. This is due to strong surface tension and the absence of particle-substrate interaction. In addition, we found the collective plasmonic coupling properties mainly depend on the packing type, and characteristic coupling peak locations depend on particle sizes. Interestingly, surface-enhanced Raman scattering (SERS) enhancements were heavily dependent on the orientational packing ordering. In particular, V-NLCS showed the highest Raman enhancement factor, which was about 77-fold greater than the H-NLCS and about 19-fold greater than C-NLCS. The results presented here reveal the nature and significance of orientational ordering in controlling plasmonic coupling and SERS enhancements of ordered plasmonic nanoparticle arrays.

  5. Plasmonic black metals via radiation absorption by two-dimensional arrays of ultra-sharp convex grooves

    DEFF Research Database (Denmark)

    Beermann, Jonas; Eriksen, René L.; Stær, Tobias Holmgaard;

    2014-01-01

    Plasmonic black surfaces formed by two-dimensional arrays of ultra-sharp convex metal grooves, in which the incident radiation is converted into gap surface plasmon polaritons (GSPPs) and subsequently absorbed (via adiabatic nanofocusing), are fabricated and investigated experimentally for gold...

  6. Fabrication of deep-profile Al-doped ZnO one- and two-dimensional lattices as plasmonic elements

    Science.gov (United States)

    Jensen, Flemming; Shkondin, Evgeniy; Takayama, Osamu; Larsen, Pernille V.; Mar, Mikkel D.; Malureanu, Radu; Lavrinenko, Andrei V.

    2016-09-01

    In this work, we report on fabrication of deep-profile one- and two-dimensional lattices made from Al-doped ZnO (AZO). AZO is considered as an alternative plasmonic material having the real part of the permittivity negative in the near infrared range. The exact position of the plasma frequency of AZO is doping concentration dependent, allowing for tuning possibilities. In addition, the thickness of the AZO film also affects its material properties. Physical vapor deposition techniques typically applied for AZO coating do not enable deep profiling of a plasmonic structure. Using the atomic layer deposition technique, a highly conformal deposition method, allows us to fabricate high-aspect ratio structures such as one-dimensional lattices with a period of 400 nm and size of the lamina of 200 nm in width and 3 μm in depth. Thus, our structures have an aspect ratio of 1:15 and are homogeneous on areas of 2×2 cm2 and more. We also produce two-dimensional arrays of circular nanopillars with similar dimensions. Instead of nanopillars hollow tubes with a wall thickness on demand from 20 nm up to a complete fill can be fabricated.

  7. Excitation, detection, and electrostatic manipulation of terahertz-frequency range plasmons in a two-dimensional electron system

    CERN Document Server

    Wu, Jingbo; Wood, Christopher D; Mistry, Divyang; Li, Lianhe; Muchenje, Wilson; Rosamond, Mark C; Chen, Li; Linfield, Edmund H; Davies, A Giles; Cunningham, John E

    2015-01-01

    Terahertz time domain spectroscopy employing free-space radiation has frequently been used to probe the elementary excitations of low-dimensional systems. The diffraction limit blocks its use for the in-plane study of individual laterally defined nanostructures, however. Here, we demonstrate a planar terahertz-frequency plasmonic circuit in which photoconductive material is monolithically integrated with a two-dimensional electron system. Plasmons with a broad spectral range (up to ~400 GHz) are excited by injecting picosecond-duration pulses, generated and detected by a photoconductive semiconductor, into a high mobility two-dimensional electron system. Using voltage modulation of a Schottky gate overlying the two-dimensional electron system, we form a tuneable plasmonic cavity, and observe electrostatic manipulation of the plasmon resonances. Our technique offers a direct route to access the picosecond dynamics of confined transport in a broad range of lateral nanostructures.

  8. Plasmonic terahertz modulator based on a grating-coupled two-dimensional electron system

    Science.gov (United States)

    Huang, Y. D.; Yu, Y.; Qin, H.; Sun, J. D.; Zhang, Z. P.; Li, X. X.; Huang, J. J.; Cai, Y.

    2016-11-01

    Electrically driven broadband modulator with large modulation depth and high speed is in high demand to meet the technical advancing and applications in terahertz fields recently. So far, the single-particle non-resonant absorption mechanism described by the Drude conductivity has been utilized in most of the related researches but is still not efficient enough. Here we proposed and demonstrated a terahertz modulator based on the collective electron plasma excitations (plasmons) in a grating-coupled two-dimensional electron gas in GaN/AlGaN heterostructure. By switching between the resonant and non-resonant conditions of the 2D plasmon excitation enabled by applying proper gate biases, the transmission of terahertz electromagnetic waves can be efficiently manipulated. Taking advantage of its resonant characteristic combined with the strong electric field enhancement in the active region, we experimentally achieved a maximum intensity modulation depth of 93%, a 3 dB operation bandwidth of ˜400 kHz, and a small required driving voltage amplitude of 2 V at a cryogenic temperature of 8.7 K. Owing to its excellent performances, this active plasmon-based terahertz modulator may offer some promising solutions in several fields of terahertz technology in the future.

  9. Nonlinear excitations in two-dimensional molecular structures with impurities

    DEFF Research Database (Denmark)

    Gaididei, Yuri Borisovich; Rasmussen, Kim; Christiansen, Peter Leth

    1995-01-01

    We study the nonlinear dynamics of electronic excitations interacting with acoustic phonons in two-dimensional molecular structures with impurities. We show that the problem is reduced to the nonlinear Schrodinger equation with a varying coefficient. The latter represents the influence of the imp......We study the nonlinear dynamics of electronic excitations interacting with acoustic phonons in two-dimensional molecular structures with impurities. We show that the problem is reduced to the nonlinear Schrodinger equation with a varying coefficient. The latter represents the influence...... excitations. Analytical results are in good agreement with numerical simulations of the nonlinear Schrodinger equation....

  10. Experimental observation of plasmons in a graphene monolayer resting on a two-dimensional subwavelength silicon grating

    DEFF Research Database (Denmark)

    Zhu, Xiaolong; Yan, Wei; Jepsen, Peter Uhd

    2013-01-01

    We experimentally demonstrate graphene-plasmon polariton excitation in a continuous graphene monolayer resting on a two-dimensional subwavelength silicon grating. The subwavelength silicon grating is fabricated by a nanosphere lithography technique with a self-assembled nanosphere array...... as a template. Measured transmission spectra illustrate the excitation of graphene-plasmon polaritons, which is further supported by numerical simulations and theoretical prediction of plasmon-band diagrams. Our grating-assisted coupling to graphene-plasmon polaritons forms an important platform for graphene...

  11. Development of a novel two dimensional surface plasmon resonance sensor using multiplied beam splitting optics.

    Science.gov (United States)

    Hemmi, Akihide; Mizumura, Ryosuke; Kawanishi, Ryuta; Nakajima, Hizuru; Zeng, Hulie; Uchiyama, Katsumi; Kaneki, Noriaki; Imato, Toshihiko

    2013-01-08

    A novel two dimensional surface plasmon resonance (SPR) sensor system with a multi-point sensing region is described. The use of multiplied beam splitting optics, as a core technology, permitted multi-point sensing to be achieved. This system was capable of simultaneously measuring nine sensing points. Calibration curves for sucrose obtained on nine sensing points were linear in the range of 0-10% with a correlation factor of 0.996-0.998 with a relative standard deviation of 0.090-4.0%. The detection limits defined as S/N = 3 were 1.98 × 10(-6) - 3.91 × 10(-5) RIU. This sensitivity is comparable to that of conventional SPR sensors.

  12. Development of a Novel Two Dimensional Surface Plasmon Resonance Sensor Using Multiplied Beam Splitting Optics

    Directory of Open Access Journals (Sweden)

    Akihide Hemmi

    2013-01-01

    Full Text Available A novel two dimensional surface plasmon resonance (SPR sensor system with a multi-point sensing region is described. The use of multiplied beam splitting optics, as a core technology, permitted multi-point sensing to be achieved. This system was capable of simultaneously measuring nine sensing points. Calibration curves for sucrose obtained on nine sensing points were linear in the range of 0–10% with a correlation factor of 0.996–0.998 with a relative standard deviation of 0.090–4.0%. The detection limits defined as S/N = 3 were 1.98 × 10−6–3.91 × 10−5 RIU. This sensitivity is comparable to that of conventional SPR sensors.

  13. Strong coupling between Tamm plasmon polariton and two dimensional semiconductor excitons

    CERN Document Server

    Hu, Tao; Wu, Lin; Zhang, Long; Shan, Yuwei; Lu, Jian; Wang, Jun; Luo, Song; Zhang, Zhe; Liao, Liming; Wu, Shiwei; Shen, S C; Chen, Zhanghai

    2016-01-01

    Two dimensional (2D) semiconductor materials of transition-metal dichalcogenides (TMDCs) manifest many peculiar physical phenomena in the light-matter interaction. Due to their ultrathin property, strong interaction with light and the robust excitons at room temperature, they provide a perfect platform for studying the physics of strong coupling in low dimension and at room temperature. Here we report the strong coupling between 2D semiconductor excitons and Tamm plasmon polaritons (TPPs). We observe a Rabi splitting of about 54 meV at room temperature by measuring the angle resolved differential reflectivity spectra and simulate the theoretical results by using the transfer matrix method. Our results will promote the realization of the TPP based ultrathin polariton devices at room temperature.

  14. Theory of tailorable optical response of two-dimensional arrays of plasmonic nanoparticles at dielectric interfaces

    Science.gov (United States)

    Sikdar, Debabrata; Kornyshev, Alexei A.

    2016-01-01

    Two-dimensional arrays of plasmonic nanoparticles at interfaces are promising candidates for novel optical metamaterials. Such systems materialise from ‘top–down’ patterning or ‘bottom–up’ self-assembly of nanoparticles at liquid/liquid or liquid/solid interfaces. Here, we present a comprehensive analysis of an extended effective quasi-static four-layer-stack model for the description of plasmon-resonance-enhanced optical responses of such systems. We investigate in detail the effects of the size of nanoparticles, average interparticle separation, dielectric constants of the media constituting the interface, and the nanoparticle position relative to the interface. Interesting interplays of these different factors are explored first for normally incident light. For off-normal incidence, the strong effects of the polarisation of light are found at large incident angles, which allows to dynamically tune the reflectance spectra. All the predictions of the theory are tested against full-wave simulations, proving this simplistic model to be adequate within the quasi-static limit. The model takes seconds to calculate the system’s optical response and makes it easy to unravel the effect of each system parameter. This helps rapid rationalization of experimental data and understanding of the optical signals from these novel ‘metamaterials’, optimised for light reflection or harvesting. PMID:27652788

  15. Static Structure of Two-Dimensional Granular Chain

    Institute of Scientific and Technical Information of China (English)

    WEN Ping-Ping; LI Liang-Sheng; ZHENG Ning; SHI Qing-Fan

    2010-01-01

    @@ Static packing structures of two-dimensional granular chains are investigated experimentally.It is shown that the packing density approximates the saturation with the exponential law as the length of chain increases.The packing structures are globally disordered,while the local square crystallization is found by using the radial distribution function.This characteristic phase of chain packing is similar to a liquid crystal state,and has properties between a conventional liquid and solid crystal.

  16. Two-dimensional localized structures in harmonically forced oscillatory systems

    Science.gov (United States)

    Ma, Y.-P.; Knobloch, E.

    2016-12-01

    Two-dimensional spatially localized structures in the complex Ginzburg-Landau equation with 1:1 resonance are studied near the simultaneous presence of a steady front between two spatially homogeneous equilibria and a supercritical Turing bifurcation on one of them. The bifurcation structures of steady circular fronts and localized target patterns are computed in the Turing-stable and Turing-unstable regimes. In particular, localized target patterns grow along the solution branch via ring insertion at the core in a process reminiscent of defect-mediated snaking in one spatial dimension. Stability of axisymmetric solutions on these branches with respect to axisymmetric and nonaxisymmetric perturbations is determined, and parameter regimes with stable axisymmetric oscillons are identified. Direct numerical simulations reveal novel depinning dynamics of localized target patterns in the radial direction, and of circular and planar localized hexagonal patterns in the fully two-dimensional system.

  17. Experimental observation of plasmons in a graphene monolayer resting on a two-dimensional subwavelength silicon grating

    CERN Document Server

    Zhu, Xiaolong; Jepsen, Peter Uhd; Hansen, Ole; Mortensen, N Asger; Xiao, Sanshui

    2013-01-01

    We experimentally demonstrate graphene-plasmon polariton excitation in a continuous graphene monolayer resting on a two-dimensional subwavelength silicon grating. The subwavelength silicon grating is fabricated by a nanosphere lithography technique with a self-assembled nanosphere array as a template. Measured transmission spectra illustrate the excitation of graphene-plasmon polaritons, which is further supported by numerical simulations and theoretical prediction of plasmonband diagrams. Our grating-assisted coupling to graphene-plasmon polaritons forms an important platform for graphene-based opto-electronics applications.

  18. Fano resonance in asymmetric-period two-dimensional plasmonic absorbers for dual-band uncooled infrared sensors

    Science.gov (United States)

    Ogawa, Shinpei; Takagawa, Yousuke; Kimata, Masafumi

    2016-11-01

    The spectral discrimination function of uncooled infrared (IR) sensors has significant advantages for applications such as fire detection, gas analysis, and biological analysis. We have previously demonstrated wavelength-selective uncooled IR sensors using two-dimensional plasmonic absorbers (2-D PLAs) over a wide range spanning the middle- and long-wavelength IR regions. 2-D PLAs are highly promising in terms of practical application due to the ease of fabrication and robustness for structural fluctuations. However, dual-band operation based on this concept has not yet been investigated, even though the ability to absorb in two different wavelength bands is extremely important for object recognition. Thus, a dual-band uncooled IR sensor was developed that employs Fano resonance in the plasmonic structures. To achieve dual-band detection, asymmetric periods in the orthogonal x- and y-directions were introduced into 2-D PLAs. Theoretical investigations predicted an asymmetric absorbance line shape dependent on the polarization attributed to Fano resonance. The spectral responsivity of the developed sensor demonstrated that selective detection occurred in two different wavelength bands due to polarization-dependent Fano resonance. The results obtained in this study will be applicable to the development of advanced sensors capable of multiband detection in the IR region.

  19. Fabrication of deep-profile Al-doped ZnO one- and two-dimensional lattices as plasmonic elements

    DEFF Research Database (Denmark)

    Jensen, Flemming; Shkondin, Evgeniy; Takayama, Osamu

    2016-01-01

    In this work, we report on fabrication of deep-profile one- and two-dimensional lattices made from Al-doped ZnO (AZO). AZO is considered as an alternative plasmonic material having the real part of the permittivity negative in the near infrared range. The exact position of the plasma frequency...

  20. Tunable two dimensional optical beam steering with reconfigurable indium tin oxide plasmonic reflectarray metasurface

    Science.gov (United States)

    Forouzmand, A.; Mosallaei, H.

    2016-12-01

    In this paper, an electrically tunable reflectarray metasurface for two dimensional (2D) beam steering is designed by integration of a thin layer of indium tin oxide (ITO) material into a metal-insulator-metal (MIM) plasmonic unit-cell. The reflectarray is composed of square-shaped patch nanoantennas placed on a stack of insulator-ITO-metallic ground plane. The resonant characteristic of unit-cell and the accumulation of carrier density at the interface of ITO-insulator play key roles in obtaining over 250° of phase agility at around 218 terahertz (THz), by electrically varying the bias voltage. An array of unit-cells with integrated ITO and 2D voltage biasing distribution (from the side) offer the possibility of designing a reconfigurable antenna in which the main beam can be steered to relatively large angles in both θ- and φ- planes at carefully selected operating frequency. The significant advantage of this design is the dynamically adjustable radiation pattern in both azimuth and elevation planes even after fabrication.

  1. Tunable Omnidirectional Surface Plasmon Resonance in Cylindrical Plasmonic Structure

    Institute of Scientific and Technical Information of China (English)

    WANG Yi; WANG Bing; ZHOU Zhi-Ping

    2008-01-01

    @@ The tunable omnidirectional surface plasmon resonance in the optical range is theoretically demonstrated in a cylindrical plasmonic crystal by using rigorous coupled-wave analysis.The cylindrical plasmonic crystal consists of an infinite chain of two-dimensional cylindrical metal-dielectric-dielectric-metal structures.The dispersion relation of the cylindrical plasmonic crystal is obtained by calculating the absorptance as a function of a TM-polarized incident plane wave and its in-plane wave vector.The omnidirectional surface plasmon resonance can be tuned from UV region to visible region by adjusting the thickness of the cylindrical dielectric layers.The absorption spectrum of the infinite chain of nanocylinders is also investigated for comparison.

  2. The encoding complexity of two dimensional range minimum data structures

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Brodnik, Andrej; Davoodi, Pooya

    2013-01-01

    In the two-dimensional range minimum query problem an input matrix A of dimension m ×n, m ≤ n, has to be preprocessed into a data structure such that given a query rectangle within the matrix, the position of a minimum element within the query range can be reported. We consider the space complexity...... of the encoding variant of the problem where queries have access to the constructed data structure but can not access the input matrix A, i.e. all information must be encoded in the data structure. Previously it was known how to solve the problem with space O(mn min {m,logn}) bits (and with constant query time...

  3. Band structure of absorptive two-dimensional photonic crystals

    Science.gov (United States)

    van der Lem, Han; Tip, Adriaan; Moroz, Alexander

    2003-06-01

    The band structure for an absorptive two-dimensional photonic crystal made from cylinders consisting of a Drude material is calculated. Absorption causes the spectrum to become complex and form islands in the negative complex half-plane. The boundaries of these islands are not always formed by the eigenvalues calculated for Bloch vectors on the characteristic path, and we find a hole in the spectrum. For realistic parameter values, the real part of the spectrum is hardly influenced by absorption, typically less than 0.25%. The employed method uses a Korringa-Kohn-Rostoker procedure together with analytical continuation. This results in an efficient approach that allows these band-structure calculations to be done on a Pentium III personal computer.

  4. Isolated structures in two-dimensional optical superlattice

    Science.gov (United States)

    Zou, Xin-Hao; Yang, Bao-Guo; Xu, Xia; Tang, Peng-Ju; Zhou, Xiao-Ji

    2017-10-01

    Overlaying commensurate optical lattices with various configurations called superlattices can lead to exotic lattice topologies and, in turn, a discovery of novel physics. In this study, by overlapping the maxima of lattices, a new isolated structure is created, while the interference of minima can generate various "sublattice" patterns. Three different kinds of primitive lattices are used to demonstrate isolated square, triangular, and hexagonal "sublattice" structures in a two-dimensional optical superlattice, the patterns of which can be manipulated dynamically by tuning the polarization, frequency, and intensity of laser beams. In addition, we propose the method of altering the relative phase to adjust the tunneling amplitudes in "sublattices". Our configurations provide unique opportunities to study particle entanglement in "lattices" formed by intersecting wells and to implement special quantum logic gates in exotic lattice geometries.

  5. Isolated Structures in Two-Dimensional Optical Superlattice

    CERN Document Server

    Zou, Xinhao; Xu, Xia; Tang, Pengju; Zhou, Xiaoji

    2016-01-01

    Overlaying commensurate optical lattices with various configurations called superlattices can lead to exotic lattice topologies and, in turn, a discovery of novel physics. In this study, by overlapping the maxima of lattices, a new isolated structure is created, while the interference of minima can generate various "sublattice" patterns. Three different kinds of primitive lattices are used to demonstrate isolated square, triangular, and hexagonal "sublattice" structures in a two-dimensional optical superlattice, the patterns of which can be manipulated dynamically by tuning the polarization, frequency, and intensity of laser beams. In addition, we propose the method of altering the relative phase to adjust the tunneling amplitudes in "sublattices." Our configurations provide unique opportunities to study particle entanglement in "lattices" formed by intersecting wells and to implement special quantum logic gates in exotic lattice geometries.

  6. Plasmonics in buried structures

    OpenAIRE

    Romero, I. T.; García de Abajo, Francisco Javier

    2009-01-01

    We describe plasmon propagation in silica-filled coupled nanovoids fully buried in gold. Propagation bands and band gaps are shown to be tunable through the degree of overlap and plasmon hybridization between contiguous voids. The effect of disorder and fabrication imperfections is thoroughly investigated. Our work explores a novel paradigm for plasmon photonics relying on plasmon modes in metal-buried structures, which can benefit from long propagation distances, cancelation of radiative los...

  7. Structure and computation of two-dimensional incompressible extended MHD

    CERN Document Server

    Grasso, D; Abdelhamid, H M; Morrison, P J

    2016-01-01

    A comprehensive study of a reduced version of Lust's equations, the extended magnetohydrodynamic (XMHD) model obtained from the two-fluid theory for electrons and ions with the enforcement of quasineutrality, is given. Starting from the Hamiltonian structure of the fully three-dimensional theory, a Hamiltonian two-dimensional incompressible four-field model is derived. In this way energy conservation along with four families of Casimir invariants are naturally obtained. The construction facilitates various limits leading to the Hamiltonian forms of Hall, inertial, and ideal MHD, with their conserved energies and Casimir invariants. Basic linear theory of the four-field model is treated, and the growth rate for collisionless reconnection is obtained. Results from nonlinear simulations of collisionless tearing are presented and interpreted using, in particular normal fields, a product of the Hamiltonian theory that gives rise to simplified equations of motion.

  8. Structure and computation of two-dimensional incompressible extended MHD

    Science.gov (United States)

    Grasso, D.; Tassi, E.; Abdelhamid, H. M.; Morrison, P. J.

    2017-01-01

    A comprehensive study of the extended magnetohydrodynamic model obtained from the two-fluid theory for electrons and ions with the enforcement of quasineutrality is given. Starting from the Hamiltonian structure of the fully three-dimensional theory, a Hamiltonian two-dimensional incompressible four-field model is derived. In this way, the energy conservation along with four families of Casimir invariants is naturally obtained. The construction facilitates various limits leading to the Hamiltonian forms of Hall, inertial, and ideal MHD, with their conserved energies and Casimir invariants. Basic linear theory of the four-field model is treated, and the growth rate for collisionless reconnection is obtained. Results from nonlinear simulations of collisionless tearing are presented and interpreted using, in particular, normal fields, a product of the Hamiltonian theory that gives rise to simplified equations of motion.

  9. Long wavelength plasmon damping in the two-dimensional electron gas

    Science.gov (United States)

    Bachlechner, Martina E.; Böhm, Helga M.; Schinner, Andreas

    1993-07-01

    The damping of the long wavelength plasmon in a homogeneos electron layer is determined by two-electron-hole excitations. Analytical and numerical results for the corresponding imaginary part of the dielectric function and the plasmon half width are presented for various densities and different manners of screening.

  10. Electrical Oscillations in Two-Dimensional Microtubular Structures

    Science.gov (United States)

    Cantero, María Del Rocío; Perez, Paula L.; Smoler, Mariano; Villa Etchegoyen, Cecilia; Cantiello, Horacio F.

    2016-06-01

    Microtubules (MTs) are unique components of the cytoskeleton formed by hollow cylindrical structures of αβ tubulin dimeric units. The structural wall of the MT is interspersed by nanopores formed by the lateral arrangement of its subunits. MTs are also highly charged polar polyelectrolytes, capable of amplifying electrical signals. The actual nature of these electrodynamic capabilities remains largely unknown. Herein we applied the patch clamp technique to two-dimensional MT sheets, to characterize their electrical properties. Voltage-clamped MT sheets generated cation-selective oscillatory electrical currents whose magnitude depended on both the holding potential, and ionic strength and composition. The oscillations progressed through various modes including single and double periodic regimes and more complex behaviours, being prominent a fundamental frequency at 29 Hz. In physiological K+ (140 mM), oscillations represented in average a 640% change in conductance that was also affected by the prevalent anion. Current injection induced voltage oscillations, thus showing excitability akin with action potentials. The electrical oscillations were entirely blocked by taxol, with pseudo Michaelis-Menten kinetics and a KD of ~1.29 μM. The findings suggest a functional role of the nanopores in the MT wall on the genesis of electrical oscillations that offer new insights into the nonlinear behaviour of the cytoskeleton.

  11. Manipulation of surface plasmon polariton propagation on isotropic and anisotropic two-dimensional materials coupled to boron nitride heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Inampudi, Sandeep; Nazari, Mina; Forouzmand, Ali; Mosallaei, Hossein, E-mail: hosseinm@coe.neu.edu [Department of Electrical and Computer Engineering, Northeastern University, 360 Huntington Ave., Boston, Massachusetts 02115 (United States)

    2016-01-14

    We present a comprehensive analysis of surface plasmon polariton dispersion characteristics associated with isotropic and anisotropic two-dimensional atomically thin layered materials (2D sheets) coupled to h-BN heterostructures. A scattering matrix based approach is presented to compute the electromagnetic fields and related dispersion characteristics of stacked layered systems composed of anisotropic 2D sheets and uniaxial bulk materials. We analyze specifically the surface plasmon polariton (SPP) dispersion characteristics in case of isolated and coupled two-dimensional layers with isotropic and anisotropic conductivities. An analysis based on residue theorem is utilized to identify optimum optical parameters (surface conductivity) and geometrical parameters (separation between layers) to maximize the SPP field at a given position. The effect of type and degree of anisotropy on the shapes of iso-frequency curves and propagation characteristics is discussed in detail. The analysis presented in this paper gives an insight to identify optimum setup to enhance the SPP field at a given position and in a given direction on the surface of two-dimensional materials.

  12. Two dimensional electron spin resonance: Structure and dynamics of biomolecules

    Science.gov (United States)

    Saxena, Sunil; Freed, Jack H.

    1998-03-01

    The potential of two dimensional (2D) electron spin resonance (ESR) for measuring the structural properties and slow dynamics of labeled biomolecules will be presented. Specifically, it will be shown how the recently developed method of double quantum (DQ) 2D ESR (S. Saxena and J. H. Freed, J. Chem. Phys. 107), 1317, (1997) can be used to measure large interelectron distances in bilabeled peptides. The need for DQ ESR spectroscopy, as well as the challenges and advantages of this method will be discussed. The elucidation of the slow reorientational dynamics of this peptide (S. Saxena and J. H. Freed, J. Phys. Chem. A, 101) 7998 (1997) in a glassy medium using COSY and 2D ELDOR ESR spectroscopy will be demonstrated. The contributions to the homogeneous relaxation time, T_2, from the overall and/or internal rotations of the nitroxide can be distinguished from the COSY spectrum. The growth of spectral diffusion cross-peaks^2 with mixing time in the 2D ELDOR spectra can be used to directly determine a correlation time from the experiment which can be related to the rotational correlation time.

  13. Plasmonics in buried structures.

    Science.gov (United States)

    Romero, I; García de Abajo, F J

    2009-10-12

    We describe plasmon propagation in silica-filled coupled nanovoids fully buried in gold. Propagation bands and band gaps are shown to be tunable through the degree of overlap and plasmon hybridization between contiguous voids. The effect of disorder and fabrication imperfections is thoroughly investigated. Our work explores a novel paradigm for plasmon photonics relying on plasmon modes in metal-buried structures, which can benefit from long propagation distances, cancelation of radiative losses, minimum crosstalk between neighboring waveguides, and maximum optical integration in three-dimensional arrangements.

  14. Electrowetting on dielectric digital microfluidic platform with nanostructured biosensor interface for enhanced two-dimensional surface plasmon resonance imaging detection

    Science.gov (United States)

    Malic, Lidija

    The sensitive and specific detection of biomolecular interactions is at the heart of many routine analyses in fundamental research, medical diagnosis and environmental monitoring. In contrast to laborious and costly multiwell plate assays, recent years have witnessed a significant progress in miniaturized and integrated biosensors, such as surface plasmon resonance (SPR), tailored to these applications. While the design of various SPR biosensors has been described in literature, a robust, multichannel, low-cost and highly sensitive solution has not yet been presented. Specifically, an integrated system that can allow surface functionalization in array format, low-volume multichannel fluidic interfacing, and increased sensitivity is sought. This thesis describes a novel electro-wetting-on-dielectric (EWOD) digital microfluidic device with integrated nanostructured biosensor interface that addresses the aforementioned issues for enhanced surface plasmon resonance imaging (SPRi) detection. We have taken the opportunity of the most recent advances in microfabrication, nanotechnology and SPR technique to develop this integrated platform. EWOD device is employed for the dynamic immobilization of bioreceptors on SPRi biosensor surface in an array fashion from sub-muL volume solutions. Programmable EWOD electric interface allows the application of an electric field at the biosensor surface for active control of the immobilized probe density and orientation, enhancing SPRi detection. Two-dimensional SPRi detection is achieved by coupling the EWOD device to SPRi instrumentation. Parallel manipulation of individual droplets allows more efficient exploitation of the biosensor surface by separating different samples for simultaneous and selective SPRi detection. Periodic gold structures (nanoposts, nanogratings and nanogrooves) residing on a surface of glass and plastic substrates are investigated to improve the SPRi sensitivity. The corresponding electromagnetic field

  15. Epsilon-Near-Zero behavior from plasmonic Dirac point: theory and realization using two-dimensional materials

    CERN Document Server

    Mattheakis, Marios; Kaxiras, Efthimios

    2016-01-01

    The electromagnetic response of a two-dimensional metal embedded in a periodic array of a dielectric host can give rise to a plasmonic Dirac point that emulates Epsilon-Near-Zero (ENZ) behavior. This theoretical result is extremely sensitive to tructural features like periodicity of the dielectric medium and thickness imperfections. We propose that such a device can actually be realized by using graphene as the 2D metal and materials like the layered semiconducting transition-metal dichalcogenides or hexagonal boron nitride as the dielectric host. We propose a systematic approach, in terms of design characteristics, for constructing metamaterials with linear, elliptical and hyperbolic dispersion relations which produce ENZ behavior, normal or negative diffraction.

  16. Two-dimensional magnetic ordering in a multilayer structure

    Indian Academy of Sciences (India)

    M K Mukhopadhyay; M K Sanyal

    2006-07-01

    The effect of confinement from one, two or from all three directions on magnetic ordering has remained an active field of research for almost 100 years. The role of dipolar interactions and anisotropy are important to obtain, the otherwise forbidden, ferromagnetic ordering at finite temperature for ions arranged in two-dimensional (2D) arrays (monolayers). We have demonstrated that conventional low-temperature magnetometry and polarized neutron scattering measurements can be performed to study short-range ferromagnetic ordering of in-plane spins in 2D systems using a multilayer stack of non-interacting monolayers of gadolinium ions formed by Langmuir–Blodgett (LB) technique. The spontaneous magnetization could not be detected in the heterogeneous magnetic phase observed here and the saturation value of the net magnetization was found to depend on the sample temperature and applied magnetic field. The net magnetization rises exponentially with lowering temperature and then reaches saturation following a ln( ) dependence. The ln( ) dependence of magnetization has been predicted from spin-wave theory of 2D in-plane spin system with ferromagnetic interaction. The experimental findings reported here could be explained by extending this theory to a temperature domain of < 1.

  17. Two-dimensional biosensor arrays based on surface plasmon resonance phase imaging

    Science.gov (United States)

    Wong, C. L.; Ho, H. P.; Yu, T. T.; Suen, Y. K.; Chow, Winnie W. Y.; Wu, S. Y.; Law, W. C.; Yuan, W.; Li, W. J.; Kong, S. K.; Lin, Chinlon

    2007-04-01

    We present a biosensor design based on capturing the two-dimenstional (2D) phase image of surface plasmon resonance (SPR). This 2D SPR imaging technique may enable parallel label-free detection of multiple analytes and is compatible with the microarray chip platform. This system uses our previously reported differential phase measurement approach, in which 2D phase maps obtained from the signal (P) and reference (S) polarizations are compared pixel by pixel. This technique greatly improves detection resolution as the subtraction step can eliminate measurement fluctuations caused by external disturbances as they essentially appear in both channels. Unlike conventional angular SPR systems, in which illumination from a range of angles must be used, phase measurement requires illumination from only one angle, thus making it well suited for 2D measurement. Also, phase-stepping introduced from a moving mirror provides the necessary modulation for accurate detection of the phase. In light of the rapidly increasing need for fast real-time detection, quantification, and identification of a range of proteins for various biomedical applications, our 2D SPR phase imaging technique should hold a promising future in the medical device market.

  18. Coherent structures in two-dimensional plasma turbulence

    DEFF Research Database (Denmark)

    Huld, T.; Nielsen, A.H.; Pécseli, H.L.;

    1991-01-01

    -band turbulent fluctuations is demonstrated by a conditional sampling technique. Depending on plasma parameters, the dominant structures can appear as monopole or multipole vortices, dipole vortices in particular. The importance of large structures for the turbulent plasma diffusion is discussed. A statistical...... analysis of the randomly varying plasma flux is presented....

  19. Coherent vortical structures in two-dimensional plasma turbulence

    DEFF Research Database (Denmark)

    Pécseli, H.L.; Coutsias, E.A.; Huld, T.;

    1992-01-01

    A laboratory experiment was carried out in order to study the nonlinear saturated stage of the cross-field electrostatic Kelvin-Helmholtz instability in a strongly magnetized plasma. The presence of large vortex-like structures in a background of wide-band turbulent fluctuations was demonstrated...... simulations. The importance of the large scale structures for the turbulent plasma transport across magnetic field lines was analyzed in detail....

  20. Graphene materials having randomly distributed two-dimensional structural defects

    Energy Technology Data Exchange (ETDEWEB)

    Kung, Harold H.; Zhao, Xin; Hayner, Cary M.; Kung, Mayfair C.

    2016-05-31

    Graphene-based storage materials for high-power battery applications are provided. The storage materials are composed of vertical stacks of graphene sheets and have reduced resistance for Li ion transport. This reduced resistance is achieved by incorporating a random distribution of structural defects into the stacked graphene sheets, whereby the structural defects facilitate the diffusion of Li ions into the interior of the storage materials.

  1. Graphene materials having randomly distributed two-dimensional structural defects

    Science.gov (United States)

    Kung, Harold H; Zhao, Xin; Hayner, Cary M; Kung, Mayfair C

    2013-10-08

    Graphene-based storage materials for high-power battery applications are provided. The storage materials are composed of vertical stacks of graphene sheets and have reduced resistance for Li ion transport. This reduced resistance is achieved by incorporating a random distribution of structural defects into the stacked graphene sheets, whereby the structural defects facilitate the diffusion of Li ions into the interior of the storage materials.

  2. Two-dimensional bismuth-silver structures on Si(111)

    Science.gov (United States)

    Denisov, N. V.; Chukurov, E. N.; Luniakov, Yu. V.; Utas, O. A.; Azatyan, S. G.; Yakovlev, A. A.; Zotov, A. V.; Saranin, A. A.

    2014-05-01

    Using scanning tunneling microscopy (STM) observations, it has been found that deposition of 0.8-1.3 monolayer of Ag onto the mixed Si(111)α - √ 3 × √ 3 / β - √ 3 × √ 3-Bi surfaces followed by annealing at 150-250°C induces formation of new ordered and quasi-ordered (Bi,Ag)/Si(111) metastable structures, √ 19 × √ 19, 4 × 4, 2 √ 3 × 2 √ 3, and ‘3 √ 3 × 3√3’. Scanning tunneling spectroscopy has demonstrated that the 2√3 × 2√3 structure is semiconducting, while the √19 × √19 and 4 × 4 structures are metallic. Structural models of the √19 × √19 and 4 × 4 have been proposed based on placing a single Ag(111)1 × 1 layer with selected Ag atoms being substituted for Bi atoms onto the bulk-like Si(111)1 × 1 surface. The models have been proved with DFT calculations and comparison of simulated and experimental STM images. Calculated band structure of the Si(111)4 × 4 structure displays a spin-split metallic surface-state band with splitting of ∆k ≈ 0.002 Å- 1 and ∆E ≈ 10 meV in the vicinity of the Fermi level.

  3. Solitary wave propagation through two-dimensional treelike structures.

    Science.gov (United States)

    Falls, William J; Sen, Surajit

    2014-02-01

    It is well known that a velocity perturbation can travel through a mass spring chain with strongly nonlinear interactions as a solitary and antisolitary wave pair. In recent years, nonlinear wave propagation in 2D structures have also been explored. Here we first consider the propagation of such a velocity perturbation for cases where the system has a 2D "Y"-shaped structure. Here each of the three pieces that make up the "Y" are made of a small mass spring chain. In addition, we consider a case where multiple "Y"-shaped structures are used to generate a "tree." We explore the early time dynamical behavior associated with the propagation of a velocity perturbation initiated at the trunk and at the extremities for both cases. We are looking for the energy transmission properties from one branch to another of these "Y"-shaped structures. Our dynamical simulations suggest the following broad observations: (i) for strongly nonlinear interactions, mechanical energy propagation resembles pulse propagation with the energy propagation being dispersive in the linear case; (ii) for strong nonlinear interactions, the tree-like structure acts as an energy gate showing preference for large perturbations in the system while the behavior of the linear case shows no such preference, thereby suggesting that such structures can possibly act as switches that activate at sufficiently high energies. The study aspires to develop insights into the nature of nonlinear wave propagation through a network of linear chains.

  4. On Space Efficient Two Dimensional Range Minimum Data Structures

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Davoodi, Pooya; Rao, S. Srinivasa

    2012-01-01

    the space and query time of the problem. We show that every algorithm enabled to access A during the query and using a data structure of size O(N/c) bits requires Ω(c) query time, for any c where 1≤c≤N. This lower bound holds for arrays of any dimension. In particular, for the one dimensional version...... of the problem, the lower bound is tight up to a constant factor. In two dimensions, we complement the lower bound with an indexing data structure of size O(N/c) bits which can be preprocessed in O(N) time to support O(clog 2 c) query time. For c=O(1), this is the first O(1) query time algorithm using a data...... structure of optimal size O(N) bits. For the case where queries can not probe A, we give a data structure of size O(N⋅min {m,log n}) bits with O(1) query time, assuming m≤n. This leaves a gap to the space lower bound of Ω(Nlog m) bits for this version of the problem...

  5. On Space Efficient Two Dimensional Range Minimum Data Structures

    DEFF Research Database (Denmark)

    Davoodi, Pooya; Brodal, Gerth Stølting; Rao, S. Srinivasa

    2010-01-01

    , the lower bound is tight up to a constant factor. In two dimensions, we complement the lower bound with an indexing data structure of size O(N/c) bits additional space which can be preprocessed in O(N) time and achieves O(clog2 c) query time. For c = O(1), this is the first O(1) query time algorithm using...... optimal O(N) bits additional space. For the case where queries can not probe A, we give a data structure of size O(N· min {m,logn}) bits with O(1) query time, assuming m ≤ n. This leaves a gap to the lower bound of Ω(Nlogm) bits for this version of the problem....

  6. STRUCTURE OF KELLER MAPPINGS, TWO-DIMENSIONAL CASE

    Directory of Open Access Journals (Sweden)

    V. V. Starkov

    2017-06-01

    Full Text Available A Keller map is a polynomial mapping ƒ : Rⁿ → Rⁿ (or Cⁿ → Cⁿ with the Jacobian J_ƒ ≡ const ≠ 0. The Jacobian conjecture was first formulated by O. N. Keller in 1939. In the modern form it supposes injectivity of a Keller map. Earlier, in the case n = 2, the author gave a complete description of Keller maps with deg ƒ ≤ 3. This paper is devoted to the description of Keller maps for which deg ƒ ≤ 4. Significant differences between these two cases are revealed, which, in particular, indicate the irregular structure of Keller maps even in the case of n = 2.

  7. Two-dimensional chiral asymmetry in unidirectional magnetic anisotropy structures

    Directory of Open Access Journals (Sweden)

    P. Perna

    2016-05-01

    Full Text Available We investigate the symmetry-breaking effects of magnetic nanostructures that present unidirectional (one-fold magnetic anisotropy. Angular and field dependent transport and magnetic properties have been studied in two different exchange-biased systems, i.e. ferromagnetic (FM/ antiferromagnetic (AFM bilayer and spin-valve structures. We experimentally show the direct relationships between the magnetoresistance (MR response and the magnetization reversal pathways for any field value and direction. We demonstrate that even though the MR signals are related to different transport phenomena, namely anisotropic magnetoresistance (AMR and giant magnetoresistance (GMR, chiral asymmetries are found around the magnetization hard-axis direction, in both cases originated from the one-fold symmetry of the interfacial exchange coupling. Our results indicate that the chiral asymmetry of transport and magnetic behaviors are intrinsic of systems with an unidirectional contribution.

  8. Electronic structure of boron based single and multi-layer two dimensional materials

    Science.gov (United States)

    Miyazato, Itsuki; Takahashi, Keisuke

    2017-09-01

    Two dimensional nanosheets based on boron and Group VA elements are designed and characterized using first principles calculations. B-N, B-P, B-As, B-Sb, and B-Bi are found to possess honeycomb structures where formation energies indicate exothermic reactions. Contrary to B-N, the cases of B-P, B-As, B-Sb, and B-Bi nanosheets are calculated to possess narrow band gaps. In addition, calculations reveal that the electronegativity difference between B and Group VA elements in the designed materials is a good indicator to predict the charge transfer and band gap of the two dimensional materials. Hydrogen adsorption over defect-free B-Sb and B-Bi results in exothermic reactions, while defect-free B-N, B-P, and B-As result in endothermic reactions. The layerability of the designed two dimensional materials is also investigated where the electronic structure of two-layered two dimensional materials is strongly coupled with how the two dimensional materials are layered. Thus, one can consider that the properties of two dimensional materials can be controlled by the composition of two dimensional materials and the structure of layers.

  9. Surface plasmon hurdles leading to a strongly localized giant field enhancement on two-dimensional (2D) metallic diffraction gratings.

    Science.gov (United States)

    Brûlé, Yoann; Demésy, Guillaume; Gralak, Boris; Popov, Evgeny

    2015-04-01

    An extensive numerical study of diffraction of a plane monochromatic wave by a single gold cone on a plane gold substrate and by a periodical array of such cones shows formation of curls in the map of the Poynting vector. They result from the interference between the incident wave, the wave reflected by the substrate, and the field scattered by the cone(s). In case of a single cone, when going away from its base along the surface, the main contribution in the scattered field is given by the plasmon surface wave (PSW) excited on the surface. As expected, it has a predominant direction of propagation, determined by the incident wave polarization. Two particular cones with height approximately 1/6 and 1/3 of the wavelength are studied in detail, as they present the strongest absorption and field enhancement when arranged in a periodic array. While the PSW excited by the smaller single cone shows an energy flux globally directed along the substrate surface, we show that curls of the Poynting vector generated with the larger cone touch the diopter surface. At this point, their direction is opposite to the energy flow of the PSW, which is then forced to jump over the vortex regions. Arranging the cones in a two-dimensional subwavelength periodic array (diffraction grating), supporting a specular reflected order only, resonantly strengthens the field intensity at the tip of cones and leads to a field intensity enhancement of the order of 10 000 with respect to the incident wave intensity. The enhanced field is strongly localized on the rounded top of the cones. It is accompanied by a total absorption of the incident light exhibiting large angular tolerances. This strongly localized giant field enhancement can be of much interest in many applications, including fluorescence spectroscopy, label-free biosensing, surface-enhanced Raman scattering (SERS), nonlinear optical effects and photovoltaics.

  10. Tunable plasmon lensing in graphene-based structure exhibiting negative refraction

    OpenAIRE

    Zhong, Shifeng; Lu, Yanxin; Li, Chao; Xu, Haixia; Shi, Fenghua; Chen, Yihang

    2017-01-01

    We propose a novel method to achieve tunable plasmon focusing in graphene/photonic-crystal hybrid structure exhibiting all-angle negative refraction at terahertz frequencies. A two-dimensional photonic crystal composed of a square lattice of dielectric rods is constructed on the substrate of a graphene sheet to provide the hyperbolic dispersion relations of the graphene plasmon, giving rise to the all-angle plasmonic negative refraction. Plasmon lensing induced from the negative refraction is...

  11. Photothermal modification of plasmonic structures

    DEFF Research Database (Denmark)

    2016-01-01

    There is presented a method for geometrically modifying plasmonic structures on a support structure, such as for printing or recording, said method comprising changing a geometry specifically of plasmonic structures, wherein said changing the geometry is carried out by photothermally melting...

  12. Photonic Band Gap Structures with Periodically Arranged Atoms in a Two-Dimensional Photonic Crystal

    Institute of Scientific and Technical Information of China (English)

    LI Zhi-Yu; CHEN Fang; ZHOU Jian-Ying

    2005-01-01

    @@ Linear transmission, reflection and absorption spectra for a new two-dimensional photonic crystal with periodically arranged resonant atoms are examined. Numerical results show that a twin-gap structure with forbidden bands displaced from a non-doped bandgap structure can be produced as a result of atomic polarization. The absorption spectrum is also significantly altered compared to the single atom entity.

  13. Direct Measurement of the Band Structure of a Buried Two-Dimensional Electron Gas

    DEFF Research Database (Denmark)

    Miwa, Jill; Hofmann, Philip; Simmons, Michelle Y.;

    2013-01-01

    We directly measure the band structure of a buried two dimensional electron gas (2DEG) using angle resolved photoemission spectroscopy. The buried 2DEG forms 2 nm beneath the surface of p-type silicon, because of a dense delta-type layer of phosphorus n-type dopants which have been placed there. ...

  14. Two-Dimensional Structure of Disulfides and Thiols on Gold(111)

    NARCIS (Netherlands)

    Nelles, Gabriele; Schönherr, Holger; Jaschke, Manfred; Wolf, Heiko; Schaub, Matthias; Kuther, Jörg; Tremel, Wolfgang; Bamberg, Ernst; Ringsdorf, Helmut; Butt, Hans-Jürgen

    1998-01-01

    In order to find factors which determine the two-dimensional structure of self-assembled monolayers (SAMs), several classes of thiols and disulfides on gold (111) have been investigated by atomic force microscopy (AFM). SAMs were formed from a series of symmetrical and asymmetrical diethylalkanoate

  15. Model for ballistic spin-transport in ferromagnet/two-dimensional electron gas/ferromagnet structures

    NARCIS (Netherlands)

    Schapers, T; Nitta, J; Heersche, HB; Takayanagi, H

    2002-01-01

    The spin dependent conductance of a ferromagnet/two-dimensional electron gas ferromagnet structure is theoretically examined in the ballistic transport regime. It is shown that the spin signal can be improved considerably by making use of the spin filtering effect of a barrier at the ferromagnet two

  16. Signatures of beta-sheet secondary structures in linear and two-dimensional infrared spectroscopy

    NARCIS (Netherlands)

    Cheatum, CM; Tokmakoff, A; Knoester, J

    2004-01-01

    Using idealized models for parallel and antiparallel beta sheets, we calculate the linear and two-dimensional infrared spectra of the amide I vibration as a function of size and secondary structure. The model assumes transition-dipole coupling between the amide I oscillators in the sheet and account

  17. Coherent two-dimensional infrared spectroscopy: quantitative analysis of protein secondary structure in solution.

    Science.gov (United States)

    Baiz, Carlos R; Peng, Chunte Sam; Reppert, Mike E; Jones, Kevin C; Tokmakoff, Andrei

    2012-04-21

    We present a method to quantitatively determine the secondary structure composition of globular proteins using coherent two-dimensional infrared (2DIR) spectroscopy of backbone amide I vibrations (1550-1720 cm(-1)). Sixteen proteins with known crystal structures were used to construct a library of 2DIR spectra, and the fraction of residues in α-helix, β-sheet, and unassigned conformations was determined by singular value decomposition (SVD) of the measured two-dimensional spectra. The method was benchmarked by removing each individual protein from the set and comparing the composition extracted from 2DIR against the composition determined from the crystal structures. To highlight the increased structural content extracted from 2DIR spectra a similar analysis was also carried out using conventional infrared absorption of the proteins in the library.

  18. Adaptivity techniques for the computation of two-dimensional viscous flows using structured meshes

    Science.gov (United States)

    Szmelter, J.; Evans, A.; Weatherill, N. P.

    In this paper three different adaptivity techniques have been investigated on the base of structured meshes. All the techniques indicate the significance of using adaptivity for improving computational results. In particular, the technique of combining point enrichment and node movement strategies offers the best compromise. Although, the work presented here used two-dimensional structured meshes, the techniques can be readily applied to hybrid and unstructured meshes. Also, preliminary three-dimensional numerical results have been already obtained by coauthors.

  19. A Multi-Resolution Data Structure for Two-Dimensional Morse Functions

    Energy Technology Data Exchange (ETDEWEB)

    Bremer, P-T; Edelsbrunner, H; Hamann, B; Pascucci, V

    2003-07-30

    The efficient construction of simplified models is a central problem in the field of visualization. We combine topological and geometric methods to construct a multi-resolution data structure for functions over two-dimensional domains. Starting with the Morse-Smale complex we build a hierarchy by progressively canceling critical points in pairs. The data structure supports mesh traversal operations similar to traditional multi-resolution representations.

  20. Surface plasmon polariton band gap structures: implications to integrated plasmonic circuits

    DEFF Research Database (Denmark)

    Bozhevolnyi, S. I.; Volkov, V. S.; Østergaard, John Erland

    2001-01-01

    PBG-based components within a few hundred micrometers, we realized that other two-dimensional waves, e.g., surface plasmon polaritons (SPPs), might be employed for the same purpose. The SPP band gap (SPPBG) has been observed for the textured silver surfaces by performing angular measurements...... of the surface reflectivity. Here we report the results of our experimental and theoretical investigations of waveguiding in the SPPBG structures....

  1. Plasmonic Gold Nanorods Coverage Influence on Enhancement of the Photoluminescence of Two-Dimensional MoS2 Monolayer

    KAUST Repository

    Lee, Kevin C. J.

    2015-11-17

    The 2-D transition metal dichalcogenide (TMD) semiconductors, has received great attention due to its excellent optical and electronic properties and potential applications in field-effect transistors, light emitting and sensing devices. Recently surface plasmon enhanced photoluminescence (PL) of the weak 2-D TMD atomic layers was developed to realize the potential optoelectronic devices. However, we noticed that the enhancement would not increase monotonically with increasing of metal plasmonic objects and the emission drop after the certain coverage. This study presents the optimized PL enhancement of a monolayer MoS2 in the presence of gold (Au) nanorods. A localized surface plasmon wave of Au nanorods that generated around the monolayer MoS2 can provide resonance wavelength overlapping with that of the MoS2 gain spectrum. These spatial and spectral overlapping between the localized surface plasmon polariton waves and that from MoS2 emission drastically enhanced the light emission from the MoS2 monolayer. We gave a simple model and physical interpretations to explain the phenomena. The plasmonic Au nanostructures approach provides a valuable avenue to enhancing the emitting efficiency of the 2-D nano-materials and their devices for the future optoelectronic devices and systems.

  2. Optical gaps, mode patterns and dipole radiation in two-dimensional aperiodic photonic structures

    Science.gov (United States)

    Boriskina, Svetlana V.; Gopinath, Ashwin; Negro, Luca Dal

    2009-05-01

    Based on the rigorous generalized Mie theory solution of Maxwell's equations for dielectric cylinders we theoretically investigate the optical properties of two-dimensional deterministic structures based on the Fibonacci, Thue-Morse and Rudin-Shapiro aperiodic sequences. In particular, we investigate bandgap formation and mode localization properties in aperiodic photonic structures based on the accurate calculation of their local density of states (LDOS). In addition, we explore the potential of photonic structures based on aperiodic order for the engineering of radiative rates and emission patterns in erbium-doped silicon-rich nitride photonic structures.

  3. Structure and phase transition of a two-dimensional dusty plasma

    Institute of Scientific and Technical Information of China (English)

    刘斌; 刘艳红; 陈雁萍; 杨思泽; 王龙

    2003-01-01

    The structure and phase transition of a two-dimensional (2D) dusty plasma have been investigated in detail by molecular dynamics simulation. Pair correlation function, static structure factor, mean square displacement, and bond angle correlation function have been calculated to characterize the structural properties. The variation of internal energy, shear modulus, particle trajectories and structural properties with temperature has been monitored to study the phase transition of the 2D dusty plasma system. The simulation results are in favour of a two-step continuous transition for this kind of plasma.

  4. Structural information in two-dimensional patterns: entropy convergence and excess entropy.

    Science.gov (United States)

    Feldman, David P; Crutchfield, James P

    2003-05-01

    We develop information-theoretic measures of spatial structure and pattern in more than one dimension. As is well known, the entropy density of a two-dimensional configuration can be efficiently and accurately estimated via a converging sequence of conditional entropies. We show that the manner in which these conditional entropies converge to their asymptotic value serves as a measure of global correlation and structure for spatial systems in any dimension. We compare and contrast entropy convergence with mutual-information and structure-factor techniques for quantifying and detecting spatial structure.

  5. Two dimensional structural analysis of reactor fuel element claddings due to local effects

    Energy Technology Data Exchange (ETDEWEB)

    Karimi, R; Wolf, L

    1978-04-01

    Two dimensional thermoelastic and inelastic stresses and deformation of typical LWR (PWR) and LMFBR (CRBR) claddings are evaluated by utilizing the following codes, for (1) Thermoelastic analysis (a) STRESS Code (b) SEGPIPE Code (2) Thermoinelastic analysis (a) Modified version of the GOGO code (b) One dimensional GRO-II code. The primary objective of this study is to analyze the effect of various local perturbations in the clad temperature field, namely eccentrically mounted fuel pellet, clad ovality, power tilt across the fuel and clad-coolant heat transfer variation on the cladding stress and deformation. In view of the fact that the thermoelastic analysis is always the first logical choice entering the structural field, it was decided to start the analysis with the two dimensional codes such as STRESS and SEGPIPE. Later, in order to assess the validity and compare the thermoelastic results to those obtained for actual reactor conditions, a two dimensional code, namely a modified version of the GOGO code, was used to account for inelastic effects such as irradiation and thermal creep and swelling in the evaluation. The comparison of thermoelastic and inelastic results shows that the former can be used effectively to analyze LWR fuel pin over 350 hours of lifetime under the most adverse condition and 500 hours of lifetime for an LMFBR fuel pin. Beyond that the inelastic solution must be used. The impact of the individual thermal perturbation and combinations thereof upon the structural quantity is also shown. Finally, the effect of rod displacement on the two dimensional thermal and structural quantities of the LMFBR fuel pin cladding is analyzed.

  6. Synthesis and structural characterization of two-dimensional hierarchical covellite nano-structures

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Nirupam, E-mail: n.banerjee@utwente.nl [Materials Research Center, Indian Institute of Science, Bangalore 560012 (India); MESA Institute for Nanotechnology, University of Twente, Enschede (Netherlands); Krupanidhi, S.B., E-mail: sbk@mrc.iisc.ernet.in [Materials Research Center, Indian Institute of Science, Bangalore 560012 (India)

    2012-12-14

    We report a simple, template free and low-temperature hydrothermal reaction pathway using Cu(II) - thiourea complex (prepared in situ from copper (II) chloride and thiourea as precursors) and citric acid as complexing agent to synthesize two-dimensional hierarchical nano-structures of covellite (CuS). The product was characterized with the help of X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive analysis of X-ray spectroscopy (EDAX) and X-ray photoelectron spectroscopy (XPS). The concentration of citric acid in the hydrothermal precursor solution was seen to have a profound effect on the nanostructure of the product generated. Based on the outcoming product nano-architecture at different concentration of the ionic surfactant in the hydrothermal precursor solution a possible mechanism suited for reaction and further nucleation is also discussed. -- Highlights: Black-Right-Pointing-Pointer A novel reaction scheme is proposed for synthesizing covellite 2D nano-structures. Black-Right-Pointing-Pointer The nanostructures were thoroughly characterized, both structurally and chemically. Black-Right-Pointing-Pointer Through variation of synthetic parameters a general growth mechanism is proposed.

  7. Two-dimensional microwave band-gap structures of different dielectric materials

    Indian Academy of Sciences (India)

    E D V Nagesh; G Santosh Babu; V Subramanian; V Sivasubramanian; V R K Murthy

    2005-12-01

    We report the use of low dielectric constant materials to form two-dimensional microwave band-gap structures for achieving high gap-to-midgap ratio. The variable parameters chosen are the lattice spacing and the geometric structure. The selected geometries are square and triangular and the materials chosen are PTFE ( = 2.1), PVC ( = 2.38) and glass ( = 5.5). Using the plane-wave expansion method, proper lattice spacing is selected for each structure and material. The observed experimental results are analyzed with the help of the theoretical prediction.

  8. Two-dimensional dynamics of a free molecular chain with a secondary structure

    DEFF Research Database (Denmark)

    Zolotaryuk, Alexander; Christiansen, Peter Leth; Savin, A.V.

    1996-01-01

    A simple two-dimensional (2D) model of an isolated (free) molecular chain with primary and secondary structures has been suggested and investigated both analytically and numerically. This model can be considered as the simplest generalization of the well-known Fermi-Pasta-Ulam model...... of an anharmonic chain in order to include transverse degrees of freedom of the chain molecules. Both the structures are provided by the first- and second-neighbor intermolecular bonds, respectively, resulting in a regular zig-zag (''20 helix'') chain on a plane. The set of two coupled nonlinear field equations...

  9. Cut-wire-pair structures as two-dimensional magnetic metamaterials.

    Science.gov (United States)

    Powell, David A; Shadrivov, Ilya V; Kivshar, Yuri S

    2008-09-15

    We study numerically and experimentally magnetic metamaterials based on cut-wire pairs instead of split-ring resonators. The cut-wire pair planar structure is extended in order to create a truly two-dimensional metamaterial suitable for scaling to optical frequencies. We fabricate the cut-wire metamaterial operating at microwave frequencies with lattice spacing around 10% of the free-space wavelength, and find good agreement with direct numerical simulations. Unlike the structures based on split-ring resonators, the nearest-neighbor coupling in cut-wire pairs can result in a magnetic stop-band with propagation in the transverse direction.

  10. Wave transmission through two-dimensional structures by the hybrid FE/WFE approach

    Science.gov (United States)

    Mitrou, Giannoula; Ferguson, Neil; Renno, Jamil

    2017-02-01

    The knowledge of the wave transmission and reflection characteristics in connected two-dimensional structures provides the necessary background for many engineering prediction methodologies. Extensive efforts have previously been exerted to investigate the propagation of waves in two-dimensional periodic structures. This work focuses on the analysis of the wave propagation and the scattering properties of joined structures comprising of two or more plates. The joint is modelled using the finite element (FE) method whereas each (of the joined) plate(s) is modelled using the wave and finite element (WFE) method. This latter approach is based on post-processing a standard FE model of a small segment of the plate using periodic structure theory; the FE model of the segment can be obtained using any commercial/in-house FE package. Stating the equilibrium and continuity conditions at the interfaces and expressing the motion in the plates in terms of the waves in each plate yield the reflection and transmission matrices of the joint. These can then be used to obtain the response of the whole structure, as well as investigating the frequency and incidence dependence for the flow of power in the system.

  11. Wake structure and thrust generation of a flapping foil in two-dimensional flow

    DEFF Research Database (Denmark)

    Andersen, Anders Peter; Bohr, Tomas; Schnipper, Teis

    2017-01-01

    We present a combined numerical (particle vortex method) and experimental (soap film tunnel) study of a symmetric foil undergoing prescribed oscillations in a two-dimensional free stream. We explore pure pitching and pure heaving, and contrast these two generic types of kinematics. We compare...... measurements and simulations when the foil is forced with pitching oscillations, and we find a close correspondence between flow visualisations using thickness variations in the soap film and the numerically determined vortex structures. Numerically, we determine wake maps spanned by oscillation frequency...

  12. T-shaped polarization beam splitter based on two-dimensional photonic crystal waveguide structures

    Science.gov (United States)

    Li, Xinlan; Shen, Hongjun; Li, Ting; Liu, Jie; Huang, Xianjian

    2016-12-01

    A T-shaped polarization beam splitter based on two-dimensional photonic crystal is proposed, which is composed of three waveguides: one input and two output. Unpolarized beams incident from the input port will be separated into two different polarization modes and outputted individually by two different coupling structures. Simulation results can be obtained by the finite-difference time-domain (FDTD) method. In the normalized frequency range of 0.3456 extinction ratio is all 30dB for both modes. The polarization beam splitter attains the requirement we expected by analyzing simulation results.

  13. Flexural vibration band gaps in thin plates with two-dimensional binary locally resonant structures

    Institute of Scientific and Technical Information of China (English)

    Yu Dian-Long; Wang Gang; Liu Yao-Zong; Wen Ji-Hong; Qiu Jing

    2006-01-01

    The complete flexural vibration band gaps are studied in the thin plates with two-dimensional binary locally resonant structures, i.e. the composite plate consisting of soft rubber cylindrical inclusions periodically placed in a host material. Numerical simulations show that the low-frequency gaps of flexural wave exist in the thin plates. The width of the first gap decreases monotonically as the matrix density increases. The frequency response of the finite periodic thin plates is simulated by the finite element method, which provides attenuations of over 20dB in the frequency range of the band gaps. The findings will be significant in the application of phononic crystals.

  14. Band gap structures in two-dimensional super porous phononic crystals.

    Science.gov (United States)

    Liu, Ying; Sun, Xiu-zhan; Chen, Shao-ting

    2013-02-01

    As one kind of new linear cellular alloys (LCAs), Kagome honeycombs, which are constituted by triangular and hexagonal cells, attract great attention due to the excellent performance compared to the ordinary ones. Instead of mechanical investigation, the in-plane elastic wave dispersion in Kagome structures are analyzed in this paper aiming to the multi-functional application of the materials. Firstly, the band structures in the common two-dimensional (2D) porous phononic structures (triangular or hexagonal honeycombs) are discussed. Then, based on these results, the wave dispersion in Kagome honeycombs is given. Through the component cell porosity controlling, the effects of component cells on the whole responses of the structures are investigated. The intrinsic relation between the component cell porosity and the critical porosity of Kagome honeycombs is established. These results will provide an important guidance in the band structure design of super porous phononic crystals.

  15. Photodetectors Based on Two-Dimensional Layer-Structured Hybrid Lead Iodide Perovskite Semiconductors.

    Science.gov (United States)

    Zhou, Jiachen; Chu, Yingli; Huang, Jia

    2016-10-05

    Hybrid lead iodide perovskite semiconductors have attracted intense research interests recently because of their easy fabrication processes and high power conversion efficiencies in photovoltaic applications. Layer-structured materials have interesting properties such as quantum confinement effect and tunable band gap due to the unique two-dimensional crystalline structures. ⟨100⟩-oriented layer-structured perovskite materials are inherited from three-dimensional ABX3 perovskite materials with a generalized formula of (RNH3)2(CH3NH3)n-1MnX3n+1, and adopt the Ruddlesden-Popper type crystalline structure. Here we report the synthesis and investigation of three layer-structured perovskite materials with different layer numbers: (C4H9NH3)2PbI4 (n = 1, one-layered perovskite), (C4H9NH3)2(CH3NH3)Pb2I7 (n = 2, two-layered perovskite) and (C4H9NH3)2(CH3NH3)2Pb3I10 (n = 3, three-layered perovskite). Their photoelectronic properties were investigated in related to their molecular structures. Photodetectors based on these two-dimensional (2D) layer-structured perovskite materials showed tunable photoresponse with short response time in milliseconds. The photodetectors based on three-layered perovskite showed better performances than those of the other two devices, in terms of output current, responsivity, Ilight/Idark ratio, and response time, because of its smaller optical band gap and more condensed microstructure comparing the other two materials. These results revealed the relationship between the molecular structures, film microstructures and the photoresponse properties of 2D layer-structured hybrid perovskites, and demonstrated their potentials as flexible, functional, and tunable semiconductors in optoelectronic applications, by taking advantage of their tunable quantum well molecular structure.

  16. Plasmons in a free-standing nanorod with a two-dimensional parabolic quantum well caused bv surface states

    Institute of Scientific and Technical Information of China (English)

    Song Ya-Feng; Lü Yan-Wu; Wen Wei; Liu Xiang-Lin; Yang Shao-Yan; Zhu Qin-Sheng; Wang Zhan-Guo

    2012-01-01

    The collective charge density excitations in a free-standing nanorod with a two-dimensional parabolic quantum well are investigated within the framework of Bohm-Pine's random-phase approximation in the two-subband model.The new simplified analytical expressions of the Coulomb interaction matrix elements and dielectric functions are derived and numerically discussed.In addition,the electron density and temperature dependences of dispersion features are also investigated.We find that in the two-dimensional parabolic quantum well,the intrasubband upper branch is coupled with the intersubband mode,which is quite different from other quasi-one-dimensional systems like a cylindrical quantum wire with an infinite rectangular potential.In addition,we also find that higher temperature results in the intersubband mode(with an energy of 12 meV(~3 THz))becoming totally damped,which agrees well with the experimental results of Raman scattering in the literature.These interesting properties may provide useful references to the design of free-standing nanorod based devices.

  17. Investigation of polarization-selective InGaAs sensor with elliptical two-dimensional holes array structure

    Science.gov (United States)

    Wang, Wenbo; Fu, Dong; Hu, Xiaobin; Xu, Yun; Song, Guofeng; Wei, Xin

    2016-10-01

    Polarimetric imaging in infrared wavelengths have attracted more and more attention for broad applications in meteorological observations, medicine, remote sensing and many other fields. Metal metamaterial structures are used in nanophotonics in order to localize and enhance the incident electromagnetic field. Here we develop an elliptical gold Two-Dimensional Holes Array (2DHA) in which photons can be manipulated by surface plasmon resonance, and the ellipse introduce the asymmetry to realize a polarization selective function. Strong polarization dependence is observed in the simulated transmission spectra. To further understand the coupling mechanism between gold holes array and InP, the different parameters of the 2DHA are analyzed. It is shown that the polarization axis is perpendicular to the major axis of the ellipse, and the degree of polarization is determined by the aspect ratio of the ellipse. Furthermore, the resonance frequency of the 2DHA shows a linear dependence on the array period, the bandwidth of transmission spectra closely related to duty cycle of the ellipse in each period. This result will establish a basis for the development of innovative polarization selective infrared sensor.

  18. Investigating protein structure and folding with coherent two-dimensional infrared spectroscopy

    Science.gov (United States)

    Baiz, Carlos; Peng, Chunte; Reppert, Michael; Jones, Kevin; Tokmakoff, Andrei

    2012-02-01

    We present a new technique to quantitatively determine the secondary structure composition of proteins in solution based on ultrafast two-dimensional infrared (2DIR) spectroscopy. The percentage of residues in alpha-helix, beta-sheet, and unstructured conformations is extracted from a principal component analysis of the measured amide-I 2DIR spectra. We benchmark the method against a library of commercially-available proteins by comparing the predicted structure compositions with the x-ray crystal structures. The new technique offers sub-picosecond time resolution, and can be used to study systems that are difficult to study with conventional methods such as gels, intrinsically disordered peptides, fibers, and aggregates. We use the technique to investigate the structural changes and timescales associated with folding and denaturing of small proteins via equilibrium and transient temperature-jump 2DIR spectroscopy.

  19. Two-dimensional structure in a generic model of triangular proteins and protein trimers.

    Science.gov (United States)

    Camp, Philip J; Duncan, Peter D

    2006-04-01

    Motivated by the diversity and complexity of two-dimensional (2D) crystals formed by triangular proteins and protein trimers, we have investigated the structures and phase behavior of hard-disk trimers. In order to mimic specific binding interactions, each trimer possesses an "attractive" disk which can interact with similar disks on other trimers via an attractive square-well potential. At low density and low temperature, the fluid phase mainly consists of tetramers, pentamers, or hexamers. Hexamers provide the structural motif for a high-density, low-temperature periodic solid phase, but we also identify a metastable periodic structure based on a tetramer motif. At high density there is a transition between orientationally ordered and disordered solid phases. The connections between simulated structures and those of 2D protein crystals--as seen in electron microscopy--are briefly discussed.

  20. Ultra-broadband Tunable Resonant Light Trapping in a Two-dimensional Randomly Microstructured Plasmonic-photonic Absorber

    Science.gov (United States)

    Liu, Zhengqi; Liu, Long; Lu, Haiyang; Zhan, Peng; Du, Wei; Wan, Mingjie; Wang, Zhenlin

    2017-03-01

    Recently, techniques involving random patterns have made it possible to control the light trapping of microstructures over broad spectral and angular ranges, which provides a powerful approach for photon management in energy efficiency technologies. Here, we demonstrate a simple method to create a wideband near-unity light absorber by introducing a dense and random pattern of metal-capped monodispersed dielectric microspheres onto an opaque metal film; the absorber works due to the excitation of multiple optical and plasmonic resonant modes. To further expand the absorption bandwidth, two different-sized metal-capped dielectric microspheres were integrated into a densely packed monolayer on a metal back-reflector. This proposed ultra-broadband plasmonic-photonic super absorber demonstrates desirable optical trapping in dielectric region and slight dispersion over a large incident angle range. Without any effort to strictly control the spatial arrangement of the resonant elements, our absorber, which is based on a simple self-assembly process, has the critical merits of high reproducibility and scalability and represents a viable strategy for efficient energy technologies.

  1. Dynamics and Structure of Disordered Peptides from Two-Dimensional Infrared Spectroscopy

    Science.gov (United States)

    Reppert, Mike; Lessing, Joshua; Peng, Chunte; Jones, Kevin; Baiz, Carlos; Tokmakoff, Andrei

    2012-02-01

    Two-dimensional infrared (IR) spectroscopy is a powerful tool for investigating the ultra-fast dynamics and association of complex biological macromolecules such as proteins and DNA. In addition to the improved spectral discrimination afforded by a two-dimensional spectrum, the ultra-fast time-resolution inherent to the technique provides unique insight (unobtainable by standard linear IR measurements) into the time-scales of macromolecular conformational fluctuations, particularly for intrinsically disordered systems. Here we discuss the use of accurate line shape modeling of peptide amide I vibrations as an advanced method for extracting structural and dynamic information from experimental spectra. The mixed quantum-classical model makes use of standard MD trajectories and a parametrized site energy and coupling map as inputs for excitonic calculations of the delocalized amide I vibrations. We present examples of the application of this method to extract site-specific structural information (such as hydrogen bond number and turn conformation) as well as insight into conformation dynamics and time-scales from experimental data for disordered peptides.

  2. Transfer of Two-Dimensional Oligonucleotide Patterns onto Stereocontrolled Plasmonic Nanostructures through DNA-Origami-Based Nanoimprinting Lithography.

    Science.gov (United States)

    Zhang, Yinan; Chao, Jie; Liu, Huajie; Wang, Fei; Su, Shao; Liu, Bing; Zhang, Lan; Shi, Jiye; Wang, Lihua; Huang, Wei; Wang, Lianhui; Fan, Chunhai

    2016-07-04

    The precise functionalization of self-assembled nanostructures with spatial and stereocontrol is a major objective of nanotechnology and holds great promise for many applications. Herein, the nanoscale addressability of DNA origami was exploited to develop a precise copy-machine-like platform that can transfer two-dimensional oligonucleotide patterns onto the surface of gold nanoparticles (AuNPs) through a deliberately designed toehold-initiated DNA displacement reaction. This strategy of DNA-origami-based nanoimprinting lithography (DONIL) demonstrates high precision in controlling the valence and valence angles of AuNPs. These DNA-decorated AuNPs act as precursors in the construction of discrete AuNP clusters with desired chirality.

  3. Isotopological Relaxation, Coherent Structures, and Gaussian Turbulence in Two-Dimensional Magnetohydrodynamics

    CERN Document Server

    Isichenko, M B

    1994-01-01

    The long-time relaxation of ideal two dimensional magnetohydrodynamic turbulence subject to the conservation of two infinite families of constants of motion---the magnetic and the "cross" topology invariants--is examined. The analysis of the Gibbs ensemble, where all integrals of motion are respected, predicts the initial state to evolve into an equilibrium, stable coherent structure (the most probable state) and decaying Gaussian turbulence (fluctuations) with a vanishing, but always positive temperature. The non-dissipative turbulence decay is accompanied by decrease in both the amplitude and the length scale of the fluctuations, so that the fluctuation energy remains finite. The coherent structure represents a set of singular magnetic islands with plasma flow whose magnetic topology is identical to that of the initial state, while the energy and the cross topology invariants are shared between the coherent structure and the Gaussian turbulence. These conservation laws suggest the variational principle of i...

  4. Two-dimensional physical habitat modeling of effects of habitat structures on urban stream restoration

    Directory of Open Access Journals (Sweden)

    Dongkyun IM

    2011-12-01

    Full Text Available River corridors, even if highly modified or degraded, still provide important habitats for numerous biological species, and carry high aesthetic and economic values. One of the keys to urban stream restoration is recovery and maintenance of ecological flows sufficient to sustain aquatic ecosystems. In this study, the Hongje Stream in the Seoul metropolitan area of Korea was selected for evaluating a physically-based habitat with and without habitat structures. The potential value of the aquatic habitat was evaluated by a weighted usable area (WUA using River2D, a two-dimensional hydraulic model. The habitat suitability for Zacco platypus in the Hongje Stream was simulated with and without habitat structures. The computed WUA values for the boulder, spur dike, and riffle increased by about 2%, 7%, and 131%, respectively, after their construction. Also, the three habitat structures, especially the riffle, can contribute to increasing hydraulic heterogeneity and enhancing habitat diversity.

  5. The mechanical and acoustic properties of two-dimensional pentamode metamaterials with different structural parameters

    Science.gov (United States)

    Cai, Xuan; Wang, Lei; Zhao, Zhigao; Zhao, Aiguo; Zhang, Xiangdong; Wu, Tao; Chen, Hong

    2016-09-01

    The effective mechanical and acoustic properties of two-dimensional pentamode metamaterials (PMs) with different structural parameters are investigated in this paper. It is found that with varying structural parameters, the effective bulk modulus and density remain constant as the same as those of water, while the figure of merit, i.e., the ratio of the bulk modulus to the shear modulus (B/G) gradually increases due to the decrease of the shear modulus. However, full wave simulations reveal that with the increase of B/G, the acoustic scattering becomes more and more intense, which indicates that the acoustic properties of pentamode metamaterials gradually deviate from those of water. These anomalous acoustic behaviors are proposed to arise from the existence of the bending modes in pentamode microstructures. Our results show that for pentamode metamaterials, the mechanical properties cannot be simply translated to their acoustic properties, and the structural parameters affect the mechanical and acoustic properties in much different ways.

  6. Coherent phenomena in terahertz 2D plasmonic structures: strong coupling, plasmonic crystals, and induced transparency by coupling of localized modes

    CERN Document Server

    Dyer, Gregory C; Allen, S James; Grine, Albert D; Bethke, Don; Reno, John L; Shaner, Eric A

    2016-01-01

    The device applications of plasmonic systems such as graphene and two dimensional electron gases (2DEGs) in III-V heterostructures include terahertz detectors, mixers, oscillators and modulators. These two dimensional (2D) plasmonic systems are not only well-suited for device integration, but also enable the broad tunability of underdamped plasma excitations via an applied electric field. We present demonstrations of the coherent coupling of multiple voltage tuned GaAs/AlGaAs 2D plasmonic resonators under terahertz irradiation. By utilizing a plasmonic homodyne mixing mechanism to downconvert the near field of plasma waves to a DC signal, we directly detect the spectrum of coupled plasmonic micro-resonator structures at cryogenic temperatures. The 2DEG in the studied devices can be interpreted as a plasmonic waveguide where multiple gate terminals control the 2DEG kinetic inductance. When the gate tuning of the 2DEG is spatially periodic, a one-dimensional finite plasmonic crystal forms. This results in a sub...

  7. Understanding the role of surface plasmon polaritons in two-dimensional achiral nanohole arrays for polarization conversion

    CERN Document Server

    Cao, Z L; Zhang, Z Q; Chan, C T; Ong, H C

    2016-01-01

    We have studied the dependence of the rotation angle and ellipticity on the sample orientation and incident polarization from metallic nanohole arrays. The arrays have four-fold symmetry and thus do not possess any intrinsic chirality. We elucidate the role of surface plasmon polaritons (SPPs) in determining the extrinsic chirality and we verify the results by using finite-difference time-domain simulation. Our results have indicated the outgoing reflection arises from the interference between the nonresonant background, which preserves the input polarization, and the SPP radiation damping, which is linearly polarized but carries a different polarization defined by the vectorial field of SPPs. More importantly, the interference manifests various polarization states ranging from linear to elliptical across the SPP resonance. We analytically formulate the outgoing waves based on temporal coupled mode theory (CMT) and the results agree well with the experiment and simulation. From CMT, we find the polarization c...

  8. Validating two-dimensional leadership models on three-dimensionally structured fish schools

    Science.gov (United States)

    Nagy, Máté; Holbrook, Robert I.; Biro, Dora; Burt de Perera, Theresa

    2017-01-01

    Identifying leader–follower interactions is crucial for understanding how a group decides where or when to move, and how this information is transferred between members. Although many animal groups have a three-dimensional structure, previous studies investigating leader–follower interactions have often ignored vertical information. This raises the question of whether commonly used two-dimensional leader–follower analyses can be used justifiably on groups that interact in three dimensions. To address this, we quantified the individual movements of banded tetra fish (Astyanax mexicanus) within shoals by computing the three-dimensional trajectories of all individuals using a stereo-camera technique. We used these data firstly to identify and compare leader–follower interactions in two and three dimensions, and secondly to analyse leadership with respect to an individual's spatial position in three dimensions. We show that for 95% of all pairwise interactions leadership identified through two-dimensional analysis matches that identified through three-dimensional analysis, and we reveal that fish attend to the same shoalmates for vertical information as they do for horizontal information. Our results therefore highlight that three-dimensional analyses are not always required to identify leader–follower relationships in species that move freely in three dimensions. We discuss our results in terms of the importance of taking species' sensory capacities into account when studying interaction networks within groups.

  9. Mode shape combination in a two-dimensional vibration energy harvester through mass loading structural modification

    Energy Technology Data Exchange (ETDEWEB)

    Sharpes, Nathan; Kumar, Prashant [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Abdelkefi, Abdessattar; Abdelmoula, Hichem [Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, New Mexico 88003 (United States); Adler, Jan [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Institute of Dynamics and Vibration Research (IDS), Leibniz Universität, Hannover 30167 (Germany); Priya, Shashank [Center for Energy Harvesting Materials and Systems (CEHMS), Virginia Tech, Blacksburg, Virginia 24061 (United States); Bio-Inspired Materials and Devices Laboratory (BMDL), Virginia Tech, Blacksburg, Virginia 24061 (United States)

    2016-07-18

    Mode shapes in the design of mechanical energy harvesters, as a means of performance increase, have been largely overlooked. Currently, the vast majority of energy harvester designs employ some variation of a single-degree-of-freedom cantilever, and the mode shapes of such beams are well known. This is especially true for the first bending mode, which is almost exclusively the chosen vibration mode for energy harvesting. Two-dimensional beam shapes (those which curve, meander, spiral, etc., in a plane) have recently gained research interest, as they offer freedom to modify the vibration characteristics of the harvester beam for achieving higher power density. In this study, the second bending mode shape of the “Elephant” two-dimensional beam shape is examined, and its interaction with the first bending mode is evaluated. A combinatory mode shape created by using mass loading structural modification to lower the second bending modal frequency was found to interact with the first bending mode. This is possible since the first two bending modes do not share common areas of displacement. The combined mode shape is shown to produce the most power of any of the considered mode shapes.

  10. Coherent phenomena in terahertz 2D plasmonic structures: strong coupling, plasmonic crystals, and induced transparency by coupling of localized modes

    Science.gov (United States)

    Dyer, Gregory C.; Aizin, Gregory R.; Allen, S. James; Grine, Albert D.; Bethke, Don; Reno, John L.; Shaner, Eric A.

    2014-05-01

    The device applications of plasmonic systems such as graphene and two dimensional electron gases (2DEGs) in III-V heterostructures include terahertz detectors, mixers, oscillators and modulators. These two dimensional (2D) plasmonic systems are not only well-suited for device integration, but also enable the broad tunability of underdamped plasma excitations via an applied electric field. We present demonstrations of the coherent coupling of multiple voltage tuned GaAs/AlGaAs 2D plasmonic resonators under terahertz irradiation. By utilizing a plasmonic homodyne mixing mechanism to downconvert the near field of plasma waves to a DC signal, we directly detect the spectrum of coupled plasmonic micro-resonator structures at cryogenic temperatures. The 2DEG in the studied devices can be interpreted as a plasmonic waveguide where multiple gate terminals control the 2DEG kinetic inductance. When the gate tuning of the 2DEG is spatially periodic, a one-dimensional finite plasmonic crystal forms. This results in a subwavelength structure, much like a metamaterial element, that nonetheless Bragg scatters plasma waves from a repeated crystal unit cell. A 50% in situ tuning of the plasmonic crystal band edges is observed. By introducing gate-controlled defects or simply terminating the lattice, localized states arise in the plasmonic crystal. Inherent asymmetries at the finite crystal boundaries produce an induced transparency-like phenomenon due to the coupling of defect modes and crystal surface states known as Tamm states. The demonstrated active control of coupled plasmonic resonators opens previously unexplored avenues for sensitive direct and heterodyne THz detection, planar metamaterials, and slow-light devices.

  11. Linear Two-Dimensional MHD of Accretion Disks: Crystalline structure and Nernst coefficient

    CERN Document Server

    Montani, Giovanni

    2009-01-01

    We analyse the two-dimensional MHD configurations characterising the steady state of the accretion disk on a highly magnetised neutron star. The model we describe has a local character and represents the extension of the crystalline structure outlined in Coppi (2005), dealing with a local model too, when a specific accretion rate is taken into account. We limit our attention to the linearised MHD formulation of the electromagnetic back-reaction characterising the equilibrium, by fixing the structure of the radial, vertical and azimuthal profiles. Since we deal with toroidal currents only, the consistency of the model is ensured by the presence of a small collisional effect, phenomenologically described by a non-zero constant Nernst coefficient (thermal power of the plasma). Such an effect provides a proper balance of the electron force equation via non zero temperature gradients, related directly to the radial and vertical velocity components. We show that the obtained profile has the typical oscillating feat...

  12. Study on electro-optic properties of two-dimensional PLZT photonic crystal band structure

    Institute of Scientific and Technical Information of China (English)

    TONG Kai; WU Xiao-gang; WANG Mei-ting

    2011-01-01

    The band characteristics of two-dimensional (2D) lead lanthanum zirconate titanate (PLZT) photonic cystals are analyzed by finite element method. The electro-optic effect of PLZT can cause the refractive index change when it is imposed by the applied electric field, and the band structure of 2D photonic crystals based on PLZT varies accordingly. The effect of the applied electric field on the structural characteristics of the first and second band gaps in 2D PLZT photonic crystals is analyzed in detail. And the results show that for each band gap, the variations of start wavelength, cut-off wavelength and bandwidth are proportional to quadratic of the electric field.

  13. The Two-dimensional ElectromagneticScattering from Periodic Chiral Structures and Its Finite Element Approximation

    Institute of Scientific and Technical Information of China (English)

    张德悦; 马富明

    2004-01-01

    In this paper, we consider the electromagnetic scattering from periodic chiral structures. The structure is periodic in one direction and invariant in another direction. The electromagnetic fields in the chiral medium are governed by the Maxwell equations together with the Drude-Born-Fedorov equations. We simplify the problem to a two-dimensional scattering problem and we show that for all but possibly a discrete set of wave numbers, there is a unique quasi-periodic weak solution to the diffraction problem. The diffraction problem can be solved by finite element method. We also establish uniform error estimates for the finite element method and the error estimates when the truncation of the nonlocal transparent boundary operators takes place.

  14. Ordered quasi-two-dimensional structure of nanoparticles in semiflexible ring polymer brushes under compression

    Science.gov (United States)

    Hua, Yunfeng; Deng, Zhenyu; Jiang, Yangwei; Zhang, Linxi

    2017-06-01

    Molecular dynamics simulations of a coarse-grained bead-spring model of ring polymer brushes under compression are presented. Flexible polymer brushes are always disordered during compression, whereas semiflexible polymer brushes tend to be ordered under sufficiently strong compression. Further, the polymer monomer density of the semiflexible polymer brush is very high near the brush surface, inducing a peak value of the free energy near the surface. Therefore, when nanoparticles are compressed in semiflexible ring polymer brushes, they tend to exhibit a closely packed single-layer structure between the brush surface and the impenetrable wall, and a quasi-two-dimensional ordered structure near the brush surface is formed under strong compression. These findings provide a new approach to designing responsive applications.

  15. An Optical Power Divider Based on Two-dimensional Photonic Crystal Structure

    Science.gov (United States)

    Mesri, Nazanin; Alipour-Banaei, Hamed

    2017-05-01

    In this paper, an optical power divider with one input and four outputs has been proposed in a two-dimensional photonic crystal with triangular lattice and simulated using dielectric holes in an air substrate. The dividing properties of the power divider have been numerically simulated and analyzed using the plane wave expansion and finite difference time domain methods. The results show that the transmittance of this divider can be as high as 94.22 % for λ=1.55 µm; thus, the proposed structure is suitable for wavelength division multiplexing communication systems. Also, due to the small footprint of the proposed structure, this optical power divider is applicable for optical-integrated circuit design.

  16. Identification of the dynamics of a two-dimensional grid structure using least square lattice filters

    Science.gov (United States)

    Montgomery, R. C.; Sundararajan, N.

    1984-01-01

    The basic theory of least square lattice filters and their use in identification of structural dynamics systems is summarized. Thereafter, this theory is applied to a two-dimensional grid structure made of overlapping bars. Previously, this theory has been applied to an integral beam. System identification results are presented for both simulated and experimental tests and they are compared with those predicted using finite element modelling. The lattice filtering approach works well for simulated data based on finite element modelling. However, considerable discrepancy exists between estimates obtained from experimental data and the finite element analysis. It is believed that this discrepancy is the result of inadequacies in the finite element modelling to represent the damped motion of the laboratory apparatus.

  17. Two-dimensional silica: Structural, mechanical properties, and strain-induced band gap tuning

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Enlai; Xie, Bo [Applied Mechanics Laboratory, Department of Engineering Mechanics, and Center for Nano and Micro Mechanics, Tsinghua University, Beijing 100084 (China); Xu, Zhiping, E-mail: xuzp@tsinghua.edu.cn [Applied Mechanics Laboratory, Department of Engineering Mechanics, and Center for Nano and Micro Mechanics, Tsinghua University, Beijing 100084 (China); State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China)

    2016-01-07

    Two-dimensional silica is of rising interests not only for its practical applications as insulating layers in nanoelectronics, but also as a model material to understand crystals and glasses. In this study, we examine structural and electronic properties of hexagonal and haeckelite phases of silica bilayers by performing first-principles calculations. We find that the corner-sharing SiO{sub 4} tetrahedrons in these two phases are locally similar. The robustness and resilience of these tetrahedrons under mechanical perturbation allow effective strain engineering of the electronic structures with band gaps covering a very wide range, from of that for insulators, to wide-, and even narrow-gap semiconductors. These findings suggest that the flexible 2D silica holds great promises in developing nanoelectronic devices with strain-tunable performance, and lay the ground for the understanding of crystalline and vitreous phases in 2D, where bilayer silica provides an ideal test-bed.

  18. Flexible Two-Dimensional Square-Grid Coordination Polymers: Structures and Functions

    Science.gov (United States)

    Kajiro, Hiroshi; Kondo, Atsushi; Kaneko, Katsumi; Kanoh, Hirofumi

    2010-01-01

    Coordination polymers (CPs) or metal-organic frameworks (MOFs) have attracted considerable attention because of the tunable diversity of structures and functions. A 4,4′-bipyridine molecule, which is a simple, linear, exobidentate, and rigid ligand molecule, can construct two-dimensional (2D) square grid type CPs. Only the 2D-CPs with appropriate metal cations and counter anions exhibit flexibility and adsorb gas with a gate mechanism and these 2D-CPs are called elastic layer-structured metal-organic frameworks (ELMs). Such a unique property can make it possible to overcome the dilemma of strong adsorption and easy desorption, which is one of the ideal properties for practical adsorbents. PMID:21152303

  19. Structures and Dynamics of a Two-Dimensional Confined Dusty Plasma System

    Institute of Scientific and Technical Information of China (English)

    HUANG Feng; LIU Yan-Hong; WANG Long

    2005-01-01

    The influence of the confining potential strength and temperature on the structures and dynamics of a two-dimensional (2D) dusty plasma system is investigated through molecular dynamic (MD) simulation. The circular symmetric confining potential leads to the nonuniform packing of particles, that is, an inner core with a hexagon lattice surrounded by a few outer circular shells. Under the appropriate confining potential and temperature, the particle trajectories on middle shells form a series of concentric and nested hexagons due to tangential movements of particles.Mean square displacement, self-diffusion constant, pair correlation function, and the nearest bond are used to characterize the structural and dynamical properties of the system. With the increase of the confining potential, the radial and tangential movements of particles have different behaviors. With the increase of temperature, the radial and tangential motions strengthen, particle trajectories gradually become disordered, and the system gradually changes from a crystal or liquid state to a gas state.

  20. Flexible Two-Dimensional Square-Grid Coordination Polymers: Structures and Functions

    Directory of Open Access Journals (Sweden)

    Hiroshi Kajiro

    2010-09-01

    Full Text Available Coordination polymers (CPs or metal-organic frameworks (MOFs have attracted considerable attention because of the tunable diversity of structures and functions. A 4,4'-bipyridine molecule, which is a simple, linear, exobidentate, and rigid ligand molecule, can construct two-dimensional (2D square grid type CPs. Only the 2D-CPs with appropriate metal cations and counter anions exhibit flexibility and adsorb gas with a gate mechanism and these 2D-CPs are called elastic layer-structured metal-organic frameworks (ELMs. Such a unique property can make it possible to overcome the dilemma of strong adsorption and easy desorption, which is one of the ideal properties for practical adsorbents.

  1. Detailed study of the TE band structure of two dimensional metallic photonic crystals with square symmetry

    Energy Technology Data Exchange (ETDEWEB)

    Sedghi, Aliasghar [Islamic Azad University, Shabestar (Iran, Islamic Republic of); Valiaghaie, Soma [Islamic Azad University, Sanandaj (Iran, Islamic Republic of); Soufiani, Ahad Rounaghi [Islamic Azad University, Sufian (Iran, Islamic Republic of)

    2014-10-15

    By virtue of the efficiency of the Dirichlet-to-Neumann map method, we have calculated, for H-polarization (TE mode), the band structure of 2D photonic crystals with a square lattice composed of metallic rods embedded in an air background. The rod in the unit cell is chosen to be circular in shape. Here, from a practical point of view, in order to obtain maximum band gaps, we have studied the band structure as a function of the size of the rods. We have also studied the flat bands appearing in the band structures and have shown that for frequencies around the surface plasmon frequency, the modes are highly localized at the interface between the metallic rods and the air background.

  2. Detailed Study of the TE band structure of two dimensional metallic photonic crystals with square symmetry

    Science.gov (United States)

    Sedghi, Aliasghar; Valiaghaie, Soma; Soufiani, Ahad Rounaghi

    2014-10-01

    By virtue of the efficiency of the Dirichlet-to-Neumann map method, we have calculated, for H-polarization (TE mode), the band structure of 2D photonic crystals with a square lattice composed of metallic rods embedded in an air background. The rod in the unit cell is chosen to be circular in shape. Here, from a practical point of view, in order to obtain maximum band gaps, we have studied the band structure as a function of the size of the rods. We have also studied the flat bands appearing in the band structures and have shown that for frequencies around the surface plasmon frequency, the modes are highly localized at the interface between the metallic rods and the air background.

  3. New hybrid lead iodides: From one-dimensional chain to two-dimensional layered perovskite structure

    Energy Technology Data Exchange (ETDEWEB)

    Xiong, Kecai; Liu, Wei [Department of Chemistry and Chemical Biology, Rutgers University, 610 Taylor Road, Piscataway, NJ 08854 (United States); Teat, Simon J. [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); An, Litao; Wang, Hao; Emge, Thomas J. [Department of Chemistry and Chemical Biology, Rutgers University, 610 Taylor Road, Piscataway, NJ 08854 (United States); Li, Jing, E-mail: jingli@rutgers.edu [Department of Chemistry and Chemical Biology, Rutgers University, 610 Taylor Road, Piscataway, NJ 08854 (United States)

    2015-10-15

    Two new hybrid lead halides (H{sub 2}BDA)[PbI{sub 4}] (1) (H{sub 2}BDA=1,4-butanediammonium dication) and (HNPEIM)[PbI{sub 3}] (2) (HNPEIM=N-​phenyl-ethanimidamidine cation) have been synthesized and structurally characterized. X-ray diffraction analyses reveal that compound 1 features a two-dimensional corner-sharing perovskite layer whereas compound 2 contains one-dimensional edge-sharing double chains. The N-​phenyl-ethanimidamidine cation within compound 2 was generated in-situ under solvothermal conditions. The optical absorption spectra collected at room temperature suggest that both compounds are semiconductors having direct band gaps, with estimated values of 2.64 and 2.73 eV for 1 and 2, respectively. Results from the density functional theory (DFT) calculations are consistent with the experimental data. Density of states (DOS) analysis reveals that in both compounds 1 and 2, the energy states in the valence band maximum region are iodine 5p atomic orbitals with a small contribution from lead 6s, while in the region of conduction band minimum, the major contributions are from the inorganic (Pb 6p atomic orbitals) and organic components (C and N 2p atomic orbitals) in compound 1 and 2, respectively. - Graphical abstract: Two new hybrid lead halides built on one-dimensional edge-sharing double chains and two-dimensional corner-sharing perovskite layers are synthesized and their structural and electronic properties are analyzed. - Highlights: • Two new hybrid lead iodides are designed, synthesized, and characterized. • They are closely related to, but different from, perovskite structures. • The electronic properties of both compounds are analyzed by DFT calculations.

  4. Structural analysis of a dipole system in two-dimensional channels.

    Science.gov (United States)

    Haghgooie, Ramin; Doyle, Patrick S

    2004-12-01

    A system of magnetic dipoles in two-dimensional (2D) channels was studied using Brownian dynamics simulations. The dipoles interact with a purely repulsive r(-3) potential and are confined by two hard walls in one of the dimensions. Solid crystals were annealed in the 2D channels and the structural properties of the crystals were investigated. The long-ranged nature of the purely repulsive dipoles combined with the presence of hard walls led to structural deviations from the unbounded (infinite) 2D dipolar crystal. The structures in the channels were characterized by a high density of particles along the walls. The particles along the wall became increasingly localized as the channel width was increased. The spacing of the walls was important in determining the properties of the structures formed in the channel. Small changes in the width of the channel induced significant structural changes in the crystal. These structural changes were manifested in the density profiles, defect concentrations, and local bond-orientation order of the system. Oscillations in the structural properties were observed as the channel width was increased, indicating the existence of magic-number channel widths for this system. As the channel width was increased the properties of the confined system approached those of the unbounded system surprisingly slowly.

  5. Resolving molecular vibronic structure using high-sensitivity two-dimensional electronic spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bizimana, Laurie A.; Brazard, Johanna; Carbery, William P.; Gellen, Tobias; Turner, Daniel B., E-mail: dturner@nyu.edu [Department of Chemistry, New York University, 100 Washington Square East, New York, New York 10003 (United States)

    2015-10-28

    Coherent multidimensional optical spectroscopy is an emerging technique for resolving structure and ultrafast dynamics of molecules, proteins, semiconductors, and other materials. A current challenge is the quality of kinetics that are examined as a function of waiting time. Inspired by noise-suppression methods of transient absorption, here we incorporate shot-by-shot acquisitions and balanced detection into coherent multidimensional optical spectroscopy. We demonstrate that implementing noise-suppression methods in two-dimensional electronic spectroscopy not only improves the quality of features in individual spectra but also increases the sensitivity to ultrafast time-dependent changes in the spectral features. Measurements on cresyl violet perchlorate are consistent with the vibronic pattern predicted by theoretical models of a highly displaced harmonic oscillator. The noise-suppression methods should benefit research into coherent electronic dynamics, and they can be adapted to multidimensional spectroscopies across the infrared and ultraviolet frequency ranges.

  6. Synthesis and structure of two-dimensional transition-metal dichalcogenides

    KAUST Repository

    Shi, Yumeng

    2015-07-13

    Two-dimensional (2D) transition-metal dichalcogenides (TMDCs) exhibit unique electrical, optical, thermal, and mechanical properties, which enable them to be used as building blocks in compact and lightweight integrated electronic systems. The controllable and reliable synthesis of atomically thin TMDCs is essential for their practical application. Recent progress in large-area synthesis of monolayer TMDCs paves the way for practical production of various 2D TMDC layers. The intrinsic optical and electrical properties of monolayer TMDCs can be defined by stoichiometry during synthesis. By manipulating the lattice structure or layer stacking manner, it is possible to create atomically thin van der Waals materials with unique and unexplored physical properties. In this article, we review recent developments in the synthesis of TMDC monolayers, alloys, and heterostructures, which shine light on the design of novel TMDCs with desired functional properties.

  7. Calculation and analysis of complex band structure in dispersive and dissipative two-dimensional photonic crystals

    CERN Document Server

    Brûlé, Yoann; Gralak, Boris

    2015-01-01

    Numerical calculation of modes in dispersive and absorptive systems is performed using the finite element method. The dispersion is tackled in the frame of an extension of Maxwell's equations where auxiliary fields are added to the electromagnetic field. This method is applied to multi-domain cavities and photonic crystals including Drude and Drude-Lorentz metals. Numerical results are compared to analytical solutions for simple cavities and to previous results of the literature for photonic crystals, showing excellent agreement. The advantages of the developed method lie on the versatility of the finite element method regarding geometries, and in sparing the use of tedious complex poles research algorithm. Hence the complex spectrum of resonances of non-hermitian operators and dissipative systems, like two-dimensional photonic crystal made of absorbing Drude metal, can be investigated in detail. The method is used to reveal unexpected features of their complex band structures.

  8. Two-dimensional modeling of electrochemical and transport phenomena in the porous structures of a PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Sahraoui, Melik [Institut Preparatoire aux Etudes d' Ingenieurs de Tunis (IPEIT) (Tunisia); Kharrat, Chafik; Halouani, Kamel [UR: Micro-Electro-Thermal Systems (METS-ENIS), Industrial Energy Systems Group, Institut Preparatoire aux Etudes d' Ingenieurs de Sfax (IPEIS), University of Sfax, B.P: 1172, 3018 Sfax (Tunisia)

    2009-04-15

    A two-dimensional CFD model of PEM fuel cell is developed by taking into account the electrochemical, mass and heat transfer phenomena occurring in all of its regions simultaneously. The catalyst layers and membrane are each considered as distinct regions with finite thickness and calculated properties such as permeability, local protonic conductivity, and local dissolved water diffusion. This finite thickness model enables to model accurately the protonic current in these regions with higher accuracy than using an infinitesimal interface. In addition, this model takes into account the effect of osmotic drag in the membrane and catalyst layers. General boundary conditions are implemented in a way taking into consideration any given species concentration at the fuel cell inlet, such as water vapor which is a very important parameter in determining the efficiency of fuel cells. Other operating parameters such as temperature, pressure and porosity of the porous structure are also investigated to characterize their effect on the fuel cell efficiency. (author)

  9. Transport Properties of Two-Dimensional Electron Gases in Antiparallel Magnetic-Electric Barrier Structures

    Institute of Scientific and Technical Information of China (English)

    PING Yun-Xia; CHENG Ze

    2006-01-01

    We study theoretically transport properties of two-dimensional electron gases through antiparallel magnetic electric barrier structures. Two kinds of magnetic barrier configurations are employed: one is that the strength of the double δ-function in opposite directions is equal and the other is that the strength is unequal. Similarities and differences of electronic transports are presented. It is found that the transmission and the conductance depend strongly on the shape of the magnetic barrier and the height of the electric barrier. The results indicate that this system does not possess any spin filtering and spin polarization and electron gases can realize perfect resonant tunneling and wave-vector filtering properties. Moreover, the strength of the effect of the inhomogeneous magnetic field on the transport properties is discussed.

  10. Two-dimensional NMR and structure determination of salmon calcitonin in methanol

    Energy Technology Data Exchange (ETDEWEB)

    Meadows, R.P.; Nikonowicz, E.P.; Jones, C.R.; Gorenstein, D.G. (Purdue Univ., Lafayette, IN (USA)); Bastian, J.W.

    1991-02-05

    The structure of the 32-residue peptide salmon calcitonin (sCT) in 90% MeOH-10% H{sub 2}O has been investigated by two-dimensional NMR techniques and molecular modeling. Sequential assignments for nearly all of the 32 spin systems have been obtained, and results indicate that the heptaresidue loop formed by the disulfide bond between Cys-1 and Cys-7 is followed by an {alpha}-helical segment from Val-8 through Tyr-22. A region of conformational heterogeneity is observed for residues 20-25, resulting from the slow isomerism of the cis and trans forms of Pro-23. The C-terminal segment is found to exist in an extended conformation.

  11. Structure of the novel steroidal antibiotic squalamine determined by two-dimensional NMR spectroscopy.

    Science.gov (United States)

    Wehrli, S L; Moore, K S; Roder, H; Durell, S; Zasloff, M

    1993-08-01

    Squalamine is a novel aminosterol recently isolated from the dogfish shark, Squalus acanthias. This water-soluble steroid exhibits potent antibacterial activity against both gram-negative and gram-positive bacteria. In addition, squalamine is fungicidal and induces osmotic lysis of protozoa. We report here the structural determination of squalamine, 3 beta-N-1-[N(3-[4-aminobutyl])-1,3 diaminopropane]-7 alpha,24 zeta-dihydroxy-5 alpha-cholestane 24-sulfate, which was deduced from the analysis of fast atom bombardment spectra and a series of two-dimensional nuclear magnetic resonance (NMR) spectra. Squalamine is a cationic steroid characterized by a condensation of an anionic bile salt intermediate with the polyamine, spermidine. This molecule is a potential host-defense agent in the shark, and provides insight into a new class of vertebrate antimicrobial molecules.

  12. Negative refraction and imaging of acoustic waves in a two-dimensional square chiral lattice structure

    Science.gov (United States)

    Zhao, Sheng-Dong; Wang, Yue-Sheng

    2016-05-01

    The negative refraction behavior and imaging effect for acoustic waves in a kind of two-dimensional square chiral lattice structure are studied in this paper. The unit cell of the proposed structure consists of four zigzag arms connected through a thin circular ring at the central part. The relation of the symmetry of the unit cell and the negative refraction phenomenon is investigated. Using the finite element method, we calculate the band structures and the equi-frequency surfaces of the system, and confirm the frequency range where the negative refraction is present. Due to the rotational symmetry of the unit cell, a phase difference is induced to the waves propagating from a point source through the structure to the other side. The phase difference is related to the width of the structure and the frequency of the source, so we can get a tunable deviated imaging. This kind of phenomenon is also demonstrated by the numerical simulation of two Gaussian beams that are symmetrical about the interface normal with the same incident angle, and the different negative refractive indexes are presented. Based on this special performance, a double-functional mirror-symmetrical slab is proposed for realizing acoustic focusing and beam separation.

  13. Disparate Strain Dependent Thermal Conductivity of Two-dimensional Penta-Structures.

    Science.gov (United States)

    Liu, Huake; Qin, Guangzhao; Lin, Yuan; Hu, Ming

    2016-06-08

    Two-dimensional (2D) carbon allotrope called penta-graphene was recently proposed from first-principles calculations and various similar penta-structures emerged. Despite significant effort having been dedicated to electronic structures and mechanical properties, little research has been focused on thermal transport in penta-structures. Motivated by this, we performed a comparative study of thermal transport properties of three representative pentagonal structures, namely penta-graphene, penta-SiC2, and penta-SiN2, by solving the phonon Boltzmann transport equation with interatomic force constants extracted from first-principles calculations. Unexpectedly, the thermal conductivity of the three penta-structures exhibits diverse strain dependence, despite their very similar geometry structures. While the thermal conductivity of penta-graphene exhibits standard monotonic reduction by stretching, penta-SiC2 possesses an unusual nonmonotonic up-and-down behavior. More interestingly, the thermal conductivity of penta-SiN2 has 1 order of magnitude enhancement due to the strain induced buckled to planar structure transition. The mechanism governing the diverse strain dependence is identified as the competition between the change of phonon group velocity and phonon lifetime of acoustic phonon modes with combined effect from the unique structure transition for penta-SiN2. The disparate thermal transport behavior is further correlated to the fundamentally different bonding nature in the atomic structures with solid evidence from the distribution of deformation charge density and more in-depth molecular orbital analysis. The reported giant and robust tunability of thermal conductivity may inspire intensive research on other derivatives of penta-structures as potential materials for emerging nanoelectronic devices. The fundamental physics understood from this study also solidifies the strategy to engineer thermal transport properties of broad 2D materials by simple mechanical

  14. Stability and electronic structure of two-dimensional allotropes of group-IV materials

    Science.gov (United States)

    Matusalem, Filipe; Marques, Marcelo; Teles, Lara K.; Bechstedt, Friedhelm

    2015-07-01

    We study six different two-dimensional (2D) allotropes of carbon, silicon, germanium, and tin by means of the ab initio density functional theory for the ground state and approximate methods to calculate their electronic structures, including quasiparticle effects. Four of the investigated allotropes are based on dumbbell geometries, one on a kagome lattice, and one on the graphenelike hexagonal structure for comparison. Concerning carbon, our calculations of the cohesive energies clearly show that the hexagonal structure (graphene) is most stable. However, in the case of Si and Ge, the dumbbell structures, particularly the large honeycomb dumbbell (LHD) geometries, are energetically favored compared to the s p2/s p3 -bonded hexagonal lattice (i.e., silicene and germanene). The main reason for this is the opening of a band gap in the honeycomb dumbbell arrangements. The LHD sheet crystals represent indirect semiconductors with a K →Γ gap of about 0.5 eV. In the Sn case we predict the MoS2-like symmetry to be more stable, in contrast to the stanene and LHD geometries predicted in literature. Our results for freestanding group-IV layers shine new light on recent experimental studies of group-IV overlayers on various substrates.

  15. Two-dimensional colloidal crystal assisted formation of conductive porous gold films with flexible structural controllability.

    Science.gov (United States)

    Lu, Zhicheng; Liu, Chen; Han, Heyou

    2015-01-01

    Two-dimensional (2D) colloidal crystals of polystyrene (PS) particles were used as a structure-controlling template to fabricate conductive Au films with an ordered array of nanoholes. The fabrication mainly involved the functionalization of the supporting substrate with polyelectrolyte (PE) functional layers, self-assembly of Au nanoparticles, and electroless deposition of gold. The self-assembly of Au nanoparticles and electroless deposition of gold were macroscopically monitored using ultraviolet-visible (UV-vis) spectroscopy based on the changes in both the extinction spectra of Au nanoparticles and the optical responses of ordered arrays of PS particles. By scanning electron microscopy (SEM) characterization, it was found that Au nanoparticles were assembled into a film structure with orderly dispersed nanoholes and the deposition of gold was confined to the preformed Au nanoparticle films. During the formation of Au films, PE layer structure, Au nanoparticle size and heating treatment applied to the PS template could influence the structures of conductive porous Au films such as the hole diameter, film thickness, and hole diameter/wall thickness ratio (D/W). In addition, this paper also described electrochemical cyclic voltammetry (CV) employed to demonstrate the porosity of the ultimate Au films.

  16. Structural semiconductor-to-semimetal phase transition in two-dimensional materials induced by electrostatic gating.

    Science.gov (United States)

    Li, Yao; Duerloo, Karel-Alexander N; Wauson, Kerry; Reed, Evan J

    2016-01-01

    Dynamic control of conductivity and optical properties via atomic structure changes is of technological importance in information storage. Energy consumption considerations provide a driving force towards employing thin materials in devices. Monolayer transition metal dichalcogenides are nearly atomically thin materials that can exist in multiple crystal structures, each with distinct electrical properties. By developing new density functional-based methods, we discover that electrostatic gating device configurations have the potential to drive structural semiconductor-to-semimetal phase transitions in some monolayer transition metal dichalcogenides. Here we show that the semiconductor-to-semimetal phase transition in monolayer MoTe2 can be driven by a gate voltage of several volts with appropriate choice of dielectric. We find that the transition gate voltage can be reduced arbitrarily by alloying, for example, for Mo(x)W(1-x)Te2 monolayers. Our findings identify a new physical mechanism, not existing in bulk materials, to dynamically control structural phase transitions in two-dimensional materials, enabling potential applications in phase-change electronic devices.

  17. A novel approach for structure analysis of two-dimensional membrane protein crystals using x-ray powder diffraction data

    CERN Document Server

    Dilanian, Ruben A; Varghese, Jose N; Wilkins, Steve W; Oka, Toshihiko; Yagi, Naoto; Quiney, Harry M; Nugent, Keith A

    2010-01-01

    The application of powder diffraction methods in two-dimensional crystallography is regarded as intractable because of the uncertainties associated with overlapping reflections. Here, we report an approach that resolves these ambiguities and provides reliable low-resolution phase information directly from powder diffraction data. We apply our method to the recovery of the structure of the bacteriorhodopsin (bR) molecule to a resolution of 7 angstroms using only powder diffraction data obtained from two-dimensional purple membrane (PM) crystals.

  18. The band gap variation of a two dimensional binary locally resonant structure in thermal environment

    Science.gov (United States)

    Li, Zhen; Wang, Xian; Li, Yue-ming

    2017-01-01

    In this study, the numerical investigation of thermal effect on band gap dynamical characteristic for a two-dimensional binary structure composed of aluminum plate periodically filled with nitrile rubber cylinder is presented. Initially, the band gap of the binary structure variation trend with increasing temperature is studied by taking the softening effect of thermal stress into account. A breakthrough is made which found the band gap being narrower and shifting to lower frequency in thermal environment. The complete band gap which in higher frequency is more sensitive to temperature that it disappears with temperature increasing. Then some new transformed models are created by changing the height of nitrile rubber cylinder from 1mm to 7mm. Simulations show that transformed model can produce a wider band gap (either flexure or complete band gap). A proper forbidden gap of elastic wave can be utilized in thermal environment although both flexure and complete band gaps become narrower with temperature. Besides that, there is a zero-frequency flat band appearing in the first flexure band, and it becomes broader with temperature increasing. The band gap width decreases trend in thermal environment, as well as the wider band gap induced by the transformed model with higher nitrile rubber cylinder is useful for the design and application of phononic crystal structures in thermal environment.

  19. Valence and conduction band structure of the quasi-two-dimensional semiconductor Sn S2

    Science.gov (United States)

    Racke, David A.; Neupane, Mahesh R.; Monti, Oliver L. A.

    2016-02-01

    We present the momentum-resolved photoemission spectroscopy of both the valence and the conduction band region in the quasi-two-dimensional van der Waals-layered indirect band gap semiconductor Sn S2 . Using a combination of angle-resolved ultraviolet photoemission and angle-resolved two-photon photoemission (AR-2PPE) spectroscopy, we characterize the band structure of bulk Sn S2 . Comparison with density functional theory calculations shows excellent quantitative agreement in the valence band region and reveals several localized bands that likely originate from defects such as sulfur vacancies. Evidence for a moderate density of defects is also observed by AR-2PPE in the conduction band region, leading to localized bands not present in the computational results. The energetic structure and dispersion of the conduction bands is captured well by the computational treatment, with some quantitative discrepancies remaining. Our results provide a broader understanding of the electronic structure of Sn S2 in particular and van der Waals-layered semiconductors in general.

  20. The band gap variation of a two dimensional binary locally resonant structure in thermal environment

    Directory of Open Access Journals (Sweden)

    Zhen Li

    2017-01-01

    Full Text Available In this study, the numerical investigation of thermal effect on band gap dynamical characteristic for a two-dimensional binary structure composed of aluminum plate periodically filled with nitrile rubber cylinder is presented. Initially, the band gap of the binary structure variation trend with increasing temperature is studied by taking the softening effect of thermal stress into account. A breakthrough is made which found the band gap being narrower and shifting to lower frequency in thermal environment. The complete band gap which in higher frequency is more sensitive to temperature that it disappears with temperature increasing. Then some new transformed models are created by changing the height of nitrile rubber cylinder from 1mm to 7mm. Simulations show that transformed model can produce a wider band gap (either flexure or complete band gap. A proper forbidden gap of elastic wave can be utilized in thermal environment although both flexure and complete band gaps become narrower with temperature. Besides that, there is a zero-frequency flat band appearing in the first flexure band, and it becomes broader with temperature increasing. The band gap width decreases trend in thermal environment, as well as the wider band gap induced by the transformed model with higher nitrile rubber cylinder is useful for the design and application of phononic crystal structures in thermal environment.

  1. A new structure of two-dimensional allotropes of group V elements

    Science.gov (United States)

    Li, Ping; Luo, Weidong

    2016-05-01

    The elemental two-dimensional (2D) materials such as graphene, silicene, germanene, and black phosphorus have attracted considerable attention due to their fascinating physical properties. Structurally they possess the honeycomb or distorted honeycomb lattices, which are composed of six-atom rings. Here we find a new structure of 2D allotropes of group V elements composed of eight-atom rings, which we name as the octagonal tiling (OT) structure. First-principles calculations indicate that these allotropes are dynamically stable and are also thermally stable at temperatures up to 600 K. These allotropes are semiconductors with band gaps ranging from 0.3 to 2.0 eV, thus they are potentially useful in near- and mid-infrared optoelectronic devices. OT-Bi is also a 2D topological insulator (TI) with a band gap of 0.33 eV, which is the largest among the reported elemental 2D TIs, and this gap can be increased further by applying compressive strains.

  2. A two-dimensional mutate-and-map strategy for non-coding RNA structure

    Science.gov (United States)

    Kladwang, Wipapat; Vanlang, Christopher C.; Cordero, Pablo; Das, Rhiju

    2011-12-01

    Non-coding RNAs fold into precise base-pairing patterns to carry out critical roles in genetic regulation and protein synthesis, but determining RNA structure remains difficult. Here, we show that coupling systematic mutagenesis with high-throughput chemical mapping enables accurate base-pair inference of domains from ribosomal RNA, ribozymes and riboswitches. For a six-RNA benchmark that has challenged previous chemical/computational methods, this ‘mutate-and-map’ strategy gives secondary structures that are in agreement with crystallography (helix error rates, 2%), including a blind test on a double-glycine riboswitch. Through modelling of partially ordered states, the method enables the first test of an interdomain helix-swap hypothesis for ligand-binding cooperativity in a glycine riboswitch. Finally, the data report on tertiary contacts within non-coding RNAs, and coupling to the Rosetta/FARFAR algorithm gives nucleotide-resolution three-dimensional models (helix root-mean-squared deviation, 5.7 Å) of an adenine riboswitch. These results establish a promising two-dimensional chemical strategy for inferring the secondary and tertiary structures that underlie non-coding RNA behaviour.

  3. Two-dimensional Fourier analysis of the spongy medullary keratin of structurally coloured feather barbs

    Science.gov (United States)

    Prum, R. O.; Torres, R.; Williamson, S.; Dyck, J.

    1999-01-01

    We conducted two-dimensional (2D) discrete Fourier analyses of the spatial variation in refractive index of the spongy medullary keratin from four different colours of structurally coloured feather barbs from three species of bird: the rose-faced lovebird, Agapornis roseicollis (Psittacidae), the budgerigar, Melopsittacus undulatus (Psittacidae), and the Gouldian finch, Poephila guttata (Estrildidae). These results indicate that the spongy medullary keratin is a nanostructured tissue that functions as an array of coherent scatterers. The nanostructure of the medullary keratin is nearly uniform in all directions. The largest Fourier components of spatial variation in refractive index in the tissue are of the appropriate size to produce the observed colours by constructive interference alone. The peaks of the predicted reflectance spectra calculated from the 2D Fourier power spectra are congruent with the reflectance spectra measured by using microspectrophotometry. The alternative physical models for the production of these colours, the Rayleigh and Mie theories, hypothesize that medullary keratin is an incoherent array and that scattered waves are independent in phase. This assumption is falsified by the ring-like Fourier power spectra of these feathers, and the spacing of the scattering air vacuoles in the medullary keratin. Structural colours of avian feather barbs are produced by constructive interference of coherently scattered light waves from the optically heterogeneous matrix of keratin and air in the spongy medullary layer.

  4. Two-Dimensional Simulation of Electrospun Nanofibrous Structures: Connection of Experimental and Simulated Results

    Directory of Open Access Journals (Sweden)

    Panu Danwanichakul

    2014-01-01

    Full Text Available Nanofibrous mats were obtained from electrospinning Nylon-6 solutions with concentrations of 30 and 35 wt% and were tested for filtration of polystyrene particles in suspension. Some experimental results were compared with the simulated ones. In the simulation, the two-dimensional structures were constructed by randomly depositing a nanofiber, which was assumed as an ellipse with an aspect ratio of 100, one by one. The nanofiber size is assumed to be polydisperse. The results showed that simulated configurations resembled real nanofibers with polydisperse diameters. Fibers from higher solution concentration were larger, resulting in larger pore size, which was confirmed with simulations. Varying the size distribution around the same average value did not make any difference to the surface coverage but it affected 2D pore areas for the systems at low fiber density. In addition, the probability for a particle to pass through the porous structure was less when the fiber density was higher and the particle diameter was larger, which was consistent with the filtration test. Lastly, water flux measurement could yield the void volume fraction as well as the volume-averaged pore diameter, which was found to be greater than the averaged 2D pore diameter from SEM micrographs by the quantity related to the fiber size.

  5. Band structures in two-dimensional phononic crystals with periodic Jerusalem cross slot

    Science.gov (United States)

    Li, Yinggang; Chen, Tianning; Wang, Xiaopeng; Yu, Kunpeng; Song, Ruifang

    2015-01-01

    In this paper, a novel two-dimensional phononic crystal composed of periodic Jerusalem cross slot in air matrix with a square lattice is presented. The dispersion relations and the transmission coefficient spectra are calculated by using the finite element method based on the Bloch theorem. The formation mechanisms of the band gaps are analyzed based on the acoustic mode analysis. Numerical results show that the proposed phononic crystal structure can yield large band gaps in the low-frequency range. The formation mechanism of opening the acoustic band gaps is mainly attributed to the resonance modes of the cavities inside the Jerusalem cross slot structure. Furthermore, the effects of the geometrical parameters on the band gaps are further explored numerically. Results show that the band gaps can be modulated in an extremely large frequency range by the geometry parameters such as the slot length and width. These properties of acoustic waves in the proposed phononic crystals can potentially be applied to optimize band gaps and generate low-frequency filters and waveguides.

  6. Reconstruction of two-dimensional magnetopause structures from Cluster observations: verification of method

    Directory of Open Access Journals (Sweden)

    H. Hasegawa

    2004-04-01

    Full Text Available A recently developed technique for reconstructing approximately two-dimensional (∂/∂z≈0, time-stationary magnetic field structures in space is applied to two magnetopause traversals on the dawnside flank by the four Cluster spacecraft, when the spacecraft separation was about 2000km. The method consists of solving the Grad-Shafranov equation for magnetohydrostatic structures, using plasma and magnetic field data measured along a single spacecraft trajectory as spatial initial values. We assess the usefulness of this single-spacecraft-based technique by comparing the magnetic field maps produced from one spacecraft with the field vectors that other spacecraft actually observed. For an optimally selected invariant (z-axis, the correlation between the field components predicted from the reconstructed map and the corresponding measured components reaches more than 0.97. This result indicates that the reconstruction technique predicts conditions at the other spacecraft locations quite well.

    The optimal invariant axis is relatively close to the intermediate variance direction, computed from minimum variance analysis of the measured magnetic field, and is generally well determined with respect to rotations about the maximum variance direction but less well with respect to rotations about the minimum variance direction. In one of the events, field maps recovered individually for two of the spacecraft, which crossed the magnetopause with an interval of a few tens of seconds, show substantial differences in configuration. By comparing these field maps, time evolution of the magnetopause structures, such as the formation of magnetic islands, motion of the structures, and thickening of the magnetopause current layer, is discussed.

    Key words. Magnetospheric physics (Magnetopause, cusp, and boundary layers – Space plasma physics (Experimental and mathematical techniques, Magnetic reconnection

  7. Hydrogen Bonding and Multiphonon Structure in One- and Two-Dimensional Polymeric Magnets

    Science.gov (United States)

    Musfeldt, J. L.; Brown, S.; Cao, J.; Conner, M. M.; McConnell, A. C.; Southerland, H. I.; Manson, J. L.; Schlueter, J. A.; Phillips, M. D.; Turnbull, M. M.; Landee, C. P.

    2007-03-01

    We report a systematic investigation of the temperature dependent infrared vibrational spectra of a family of chemically related coordination polymeric magnets based upon two different bridging anions, fluoride (F^-) and bifluoride (HF2^-), in copper-pyrazine complexes including Cu(HF2)(pyz)2BF4, Cu(HF2)(pyz)2ClO4, and CuF2(H2O)(pyz)). We compare our results with several one- and two-dimensional prototype materials including Cu(NO3)2(pyz) and Cu(ClO4)(pyz) 2. Unusual low temperature hydrogen bonding, local structural transitions associated with stronger low-temperature hydrogen bonding, and striking multiphonon effects that derive from coupling of an infrared-active fundamental with strong Raman-active modes of the pyrazine building-block molecule are observed. Based on the spectroscopic evidence, these interactions are common to this family of coordination polymers and work to stabilize the low temperature magnetic state. Similar interactions are likely to be present in other molecule-based magnets.

  8. Spatially structured oscillations in a two-dimensional excitatory neuronal network with synaptic depression

    KAUST Repository

    Kilpatrick, Zachary P.

    2009-10-29

    We study the spatiotemporal dynamics of a two-dimensional excitatory neuronal network with synaptic depression. Coupling between populations of neurons is taken to be nonlocal, while depression is taken to be local and presynaptic. We show that the network supports a wide range of spatially structured oscillations, which are suggestive of phenomena seen in cortical slice experiments and in vivo. The particular form of the oscillations depends on initial conditions and the level of background noise. Given an initial, spatially localized stimulus, activity evolves to a spatially localized oscillating core that periodically emits target waves. Low levels of noise can spontaneously generate several pockets of oscillatory activity that interact via their target patterns. Periodic activity in space can also organize into spiral waves, provided that there is some source of rotational symmetry breaking due to external stimuli or noise. In the high gain limit, no oscillatory behavior exists, but a transient stimulus can lead to a single, outward propagating target wave. © Springer Science + Business Media, LLC 2009.

  9. Interfacial engineering of two-dimensional nano-structured materials by atomic layer deposition

    Science.gov (United States)

    Zhuiykov, Serge; Kawaguchi, Toshikazu; Hai, Zhenyin; Karbalaei Akbari, Mohammad; Heynderickx, Philippe M.

    2017-01-01

    Atomic Layer Deposition (ALD) is an enabling technology which provides coating and material features with significant advantages compared to other existing techniques for depositing precise nanometer-thin two-dimensional (2D) nanostructures. It is a cyclic process which relies on sequential self-terminating reactions between gas phase precursor molecules and a solid surface. ALD is especially advantageous when the film quality or thickness is critical, offering ultra-high aspect ratios. ALD provides digital thickness control to the atomic level by depositing film one atomic layer at a time, as well as pinhole-free films even over a very large and complex areas. Digital control extends to sandwiches, hetero-structures, nano-laminates, metal oxides, graded index layers and doping, and it is perfect for conformal coating and challenging 2D electrodes for various functional devices. The technique's capabilities are presented on the example of ALD-developed ultra-thin 2D tungsten oxide (WO3) over the large area of standard 4" Si substrates. The discussed advantages of ALD enable and endorse the employment of this technique for the development of hetero-nanostructure 2D semiconductors with unique properties.

  10. Experimental Observation of Exact Coherent Structures in a Weakly Turbulent Quasi-Two-Dimensional Flow

    Science.gov (United States)

    Suri, Balachandra; Tithof, Jeffrey; Pallantla, Ravi Kumar; Grigoriev, Roman; Schatz, Michael

    2015-11-01

    The dynamical systems approach to fluid turbulence relies on understanding the role of unstable, non-chaotic solutions - such as equilibria, traveling waves, and periodic orbits - of the Navier-Stokes equations. These solutions, called Exact Coherent Structures, exist in the same parameter regime as turbulence, but being unstable, are observed in experiments only as short transients. In this talk, we present experimental evidence for the existence and dynamical relevance of unstable equilibria in a weakly turbulent quasi-two-dimensional (Q2D) Kolmogorov flow. In the experiment, this Q2D flow is generated in an electromagnetically driven shallow layer of electrolyte. The numerical simulations, however, use a strictly 2D model which incorporates the effects of the finite thickness of the fluid layer in the experiment. During its evolution, there are instances when the dynamics of a weakly turbulent flow slow down, rather dramatically. Using experimental flow fields from such instances, and by means of a Newton-Solver, we numerically compute several unstable equilibria. Additionally, using numerical simulations, we show that the dynamics of a turbulent flow in the neighbourhood of an equilibrium are accurately described by the unstable manifold of the equilibrium. This work is supported in part by the National Science Foundation under grants CBET-0900018, and CMMI-1234436.

  11. Hamiltonian structure for two-dimensional extended Green-Naghdi equations

    Science.gov (United States)

    Matsuno, Yoshimasa

    2016-06-01

    The two-dimensional Green-Naghdi (GN) shallow-water model for surface gravity waves is extended to incorporate the arbitrary higher-order dispersive effects. This can be achieved by developing a novel asymptotic analysis applied to the basic nonlinear water wave problem. The linear dispersion relation for the extended GN system is then explored in detail. In particular, we use its characteristics to discuss the well-posedness of the linearized problem. As illustrative examples of approximate model equations, we derive a higher-order model that is accurate to the fourth power of the dispersion parameter in the case of a flat bottom topography, and address the related issues such as the linear dispersion relation, conservation laws and the pressure distribution at the fluid bottom on the basis of this model. The original Green-Naghdi (GN) model is then briefly described in the case of an uneven bottom topography. Subsequently, the extended GN system presented here is shown to have the same Hamiltonian structure as that of the original GN system. Last, we demonstrate that Zakharov's Hamiltonian formulation of surface gravity waves is equivalent to that of the extended GN system by rewriting the former system in terms of the momentum density instead of the velocity potential at the free surface.

  12. Coherent Structures in Turbulent Flow over Two-Dimensional River Dunes

    CERN Document Server

    Omidyeganeh, Mohammad

    2011-01-01

    We performed large-eddy simulations of the flow over a typical two-dimensional dune geometry at laboratory scale (the Reynolds number based on the average channel height and mean velocity is 18,900) using the Lagrangian dynamic eddy-viscosity subgrid-scale model. The flow separates at the dune crest and reattaches downstream on the bed (at x=5.7h). A favorable pressure gradient accelerates the flow over the stoss-side (the upward-sloping region for x > 8h) and an unfavorable gradient for x < 8h decelerates the flow over the lee-side of the dune. Due to the separation of the flow, a shear layer is generated after the crest that expands in the wake region towards the next dune. The outer-layer turbulence structures are visualized through isosurfaces of pressure fluctuations colored by distance to the surface. Spanwise vortices are generated in the shear layer separating from the crest due to the Kelvin-Helmholtz instability. They are convected downstream and either interact with the wall or rise to the surfa...

  13. Two-dimensional iron oxide bi-and trilayer structures on Pd(100)

    Science.gov (United States)

    Kuhness, D.; Pomp, S.; Mankad, V.; Barcaro, G.; Sementa, L.; Fortunelli, A.; Netzer, F. P.; Surnev, S.

    2016-03-01

    The growth morphology and structure of iron oxide films, prepared by postoxidation of Fe monolayers on a Pd(100) surface, have been investigated in a multitechnique study, using scanning tunneling microscopy (STM), low energy electron diffraction (LEED), high-resolution x-ray photoelectron spectroscopy (HR-XPS) and x-ray absorption spectroscopy (XAS), both using synchrotron radiation, and comprehensive density functional theory (DFT) analysis. A two-dimensional (2-D) hexagonal O-Fe-O trilayer phase has been generated at submonolayer Fe coverages, which converges into two different 2-D hexagonal Fe-O bilayer structures at one monolayer. One phase exhibits a c(8 × 2) coincidence structure and is associated with a stoichiometric FeO(111) bilayer. The second phase displays a superstructure of triangular loops, which is understood from DFT modeling as excess O ad-atoms in the terminating oxygen layer, thus corresponding to a FeO bilayer with a formal FeO1.125 stoichiometry. Annealing the latter in ultrahigh vacuum to 770 K results in the pure c(8 × 2) wetting layer. The thermodynamic stability of the O-Fe-O trilayer and FeO bilayer phases is analyzed in the DFT framework and is found to be in good agreement with the experiment. The absence of a c(4 × 2)-Fe3O4 phase in the experimental phase diagram, which is found to be stable by DFT and is experimentally encountered for other transition metal oxide films, such as Ni-, Co-, and Mn-oxide on Pd(100), is ascribed to kinetic reasons.

  14. Resistive MHD reconstruction of two-dimensional coherent structures in space

    Directory of Open Access Journals (Sweden)

    W.-L. Teh

    2010-11-01

    Full Text Available We present a reconstruction technique to solve the steady resistive MHD equations in two dimensions with initial inputs of field and plasma data from a single spacecraft as it passes through a coherent structure in space. At least two components of directly measured electric fields (the spacecraft spin-plane components are required for the reconstruction, to produce two-dimensional (2-D field and plasma maps of the cross section of the structure. For convenience, the resistivity tensor η is assumed diagonal in the reconstruction coordinates, which allows its values to be estimated from Ohm's law, E+v×B=η·j. In the present paper, all three components of the electric field are used. We benchmark our numerical code by use of an exact, axi-symmetric solution of the resistive MHD equations and then apply it to synthetic data from a 3-D, resistive, MHD numerical simulation of reconnection in the geomagnetic tail, in a phase of the event where time dependence and deviations from 2-D are both weak. The resistivity used in the simulation is time-independent and localized around the reconnection site in an ellipsoidal region. For the magnetic field, plasma density, and pressure, we find very good agreement between the reconstruction results and the simulation, but the electric field and plasma velocity are not predicted with the same high accuracy.

  15. White-Light Emission and Structural Distortion in New Corrugated Two-Dimensional Lead Bromide Perovskites.

    Science.gov (United States)

    Mao, Lingling; Wu, Yilei; Stoumpos, Constantinos C; Wasielewski, Michael R; Kanatzidis, Mercouri G

    2017-03-29

    Hybrid inorganic-organic perovskites are developing rapidly as high performance semiconductors. Recently, two-dimensional (2D) perovskites were found to have white-light, broadband emission in the visible range that was attributed mainly to the role of self-trapped excitons (STEs). Here, we describe three new 2D lead bromide perovskites incorporating a series of bifunctional ammonium dications as templates which also emit white light: (1) α-(DMEN)PbBr4 (DMEN = 2-(dimethylamino)ethylamine), which adopts a unique corrugated layered structure in space group Pbca with unit cell a = 18.901(4) Å, b = 11.782(2) Å, and c = 23.680(5) Å; (2) (DMAPA)PbBr4 (DMAPA = 3-(dimethylamino)-1-propylamine), which crystallizes in P21/c with a = 10.717(2) Å, b = 11.735(2) Å, c = 12.127(2) Å, and β = 111.53(3)°; and (3) (DMABA)PbBr4 (DMABA = 4-dimethylaminobutylamine), which adopts Aba2 with a = 41.685(8) Å, b = 23.962(5) Å, and c = 12.000(2) Å. Photoluminescence (PL) studies show a correlation between the distortion of the "PbBr6" octahedron in the 2D layer and the broadening of PL emission, with the most distorted structure having the broadest emission (183 nm full width at half-maximum) and longest lifetime (τavg = 1.39 ns). The most distorted member α-(DMEN)PbBr4 exhibits white-light emission with a color rendering index (CRI) of 73 which is similar to a fluorescent light source and correlated color temperature (CCT) of 7863 K, producing "cold" white light.

  16. Structuring Au nanoparticles on two-dimensional MoS2 nanosheets for electrochemical glucose biosensors.

    Science.gov (United States)

    Parlak, Onur; İncel, Anıl; Uzun, Lokman; Turner, Anthony P F; Tiwari, Ashutosh

    2017-03-15

    Two-dimensional (2D) bioelectronics is an emerging field of research which fuses the advantages of 2D nanomaterials with those of nanobiotechnology. Due to the various physical and chemical properties present in layered counterparts of 2D materials, including high charge density, large surface area, remarkable electron mobility, ready electron transport, sizeable band gaps and ease of hybridisation, they are set to become a versatile tool to fabricate sensitive and selective novel biodevices, which might offer an unique advantages to tackle key energy, medical and environmental issues. Current 2D bioelectronics research is focused on the design of simple-to-use and cheaper biodevices, while improving their selectivity, sensitivity and stability. However, current designs generally suffer from a lack of efficiency, relatively low sensitivity, slow electron transfer kinetics, high background charging current and low current density arising from poor mass transport. Here, we report a nanoparticle-structured MoS2 nanosheet as an ideal semiconductor interface, which is able to form a homogenous layer on the electrode surface for the assembly of gold nanoparticles. This not only enhances electrocatalytic reactions, but also provides excellent electrochemical properties such as high faradic-to-capacitive current ratios, high current density and electron mobility, and faster mass transport, due to the dominance of radial diffusion. The MoS2/Au NPs/GOx bioelectrode exhibits a linear response to glucose from 0.25 to 13.2mM, with a detection limit of 0.042µM (S/N=3) and sensitivity of 13.80µA/µM/cm(2).

  17. Dipeptide Structural Analysis Using Two-Dimensional NMR for the Undergraduate Advanced Laboratory

    Science.gov (United States)

    Gonzalez, Elizabeth; Dolino, Drew; Schwartzenburg, Danielle; Steiger, Michelle A.

    2015-01-01

    A laboratory experiment was developed to introduce students in either an organic chemistry or biochemistry lab course to two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy using simple biomolecules. The goal of this experiment is for students to understand and interpret the information provided by a 2D NMR spectrum. Students are…

  18. Dipeptide Structural Analysis Using Two-Dimensional NMR for the Undergraduate Advanced Laboratory

    Science.gov (United States)

    Gonzalez, Elizabeth; Dolino, Drew; Schwartzenburg, Danielle; Steiger, Michelle A.

    2015-01-01

    A laboratory experiment was developed to introduce students in either an organic chemistry or biochemistry lab course to two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy using simple biomolecules. The goal of this experiment is for students to understand and interpret the information provided by a 2D NMR spectrum. Students are…

  19. Free energy and structure of dislocation cores in two-dimensional crystals

    NARCIS (Netherlands)

    Bladon, P.B.; Frenkel, D.

    2004-01-01

    The nature of the melting transition in two dimensions is critically dependent on the core energy of dislocations. In this paper, we report calculations of the core free energy and the core size of dislocations in two-dimensional solids of systems interacting via square well, hard disk, and r-12

  20. Coupling between Fano and Bragg bands in photonic band structure of two-dimensional metallic photonic structures

    CERN Document Server

    Markos, Peter

    2016-01-01

    Frequency and transmission spectrum of two-dimensional array of metallic rods is investigated numerically. Based on the recent analysis of the band structure of two-dimensional photonic crystal with dielectric rods [P. Marko\\v{s}, Phys. Rev. A 92 043814 (2015)] we identify two types of bands in the frequency spectrum: Bragg (P) bands resulting from a periodicity and Fano (F) bands which arise from Fano resonances associated with each of the cylinders within the periodic structure. It is shown that the existence of Fano band in a certain frequency range is manifested by a Fano resonance in the transmittance. In particular, we re-examine the symmetry properties of the H- polarized band structure in the frequency range where the spectrum consists of the localized modes associated with the single scatterer resonances and we explore process of formation of Fano bands by identifying individual terms in the expansion of the LCAO states. We demonstrate how the interplay between the two scattering mechanisms affects p...

  1. A humidity sensitive two-dimensional tunable amorphous photonic structure in the outer layer of bivalve ligament from Sunset Siliqua

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Weigang, E-mail: abczwg15@163.com [College of Materials and Chemical Engineering, Chuzhou University, Chuzhou 239000 (China); Zhang, Gangsheng [College of Material Science and Technology, Guangxi University, Nanning 530004 (China)

    2015-07-01

    A humidity sensitive two-dimensional tunable amorphous photonic structure (2D TAPS) in the outer layer of bivalve ligament from Sunset Siliqua (OLLS) was reported in this paper. The structural color and microstructure of OLLS were investigated by reflection spectra and scanning electron microscopy, respectively. The results indicate that the reflection peak wavelength of the wet OLLS blue-shifts from 454 nm to 392 nm with the increasing of air drying time from 0 to 40 min, while the reflectivity decreases gradually and vanishes at last, relevant color changes from blue to black background color. The structural color in the OLLS is produced by a two-dimensional amorphous photonic structure consisting of aligned protein fibers, in which the diameter of protein fiber and the inter-fiber spacing are 101 ± 12 nm. Water can reversibly tune the reflection peak wavelength and reflectivity of this photonic structure, and the regulation achieved through dynamically tuning the interaction between inter-fiber spacing and average refractive index. - Highlights: • A humidity sensitive two-dimensional tunable amorphous photonic structure • Water can reversibly tune the reflection peak wavelength and reflectivity of this photonic structure. • This photonic structure may yield very useful template for artificial structures.

  2. Analysis of bandgap characteristics of two-dimensional periodic structures by using the source-model technique.

    Science.gov (United States)

    Ludwig, Alon; Leviatan, Yehuda

    2003-08-01

    We introduce a solution based on the source-model technique for periodic structures for the problem of electromagnetic scattering by a two-dimensional photonic bandgap crystal slab illuminated by a transverse-magnetic plane wave. The proposed technique takes advantage of the periodicity of the slab by solving the problem within the unit cell of the periodic structure. The results imply the existence of a frequency bandgap and provide a valuable insight into the relationship between the dimensions of a finite periodic structure and its frequency bandgap characteristics. A comparison shows a discrepancy between the frequency bandgap obtained for a very thick slab and the bandgap obtained by solving the corresponding two-dimensionally infinite periodic structure. The final part of the paper is devoted to explaining in detail this apparent discrepancy.

  3. Identification of the dynamics of a two-dimensional grid structure using least square lattice filters. [for large space structures

    Science.gov (United States)

    Montgomery, R. C.; Sundararajan, N.

    1984-01-01

    It is doubtful whether the dynamics of large space structures (LSS) can be predicted well enough for control system design applications. Hence, dynamic modeling from on-orbit measurements followed by a modification of the control system is of interest, taking into account the utilization of adaptive control concepts. The present paper is concerned with the model determination phase of the adaptive control problem. Using spectral decoupling to determine mode shapes, mode frequency and damping data can be obtained with the aid of an equation error parameter identification method. This method employs a second-order auto-regressive moving average (ARMA) model to represent the natural mode amplitudes. The discussed procedure involves an extension of the application of the least square lattice filter in system identification to a nonintegral, two-dimensional grid structure made of overlapping bars.

  4. A compact chaotic laser device with a two-dimensional external cavity structure

    Energy Technology Data Exchange (ETDEWEB)

    Sunada, Satoshi, E-mail: sunada@se.kanazawa-u.ac.jp; Adachi, Masaaki [Faculty of Mechanical Engineering, Institute of Science and Engineering, Kanazawa University, Kakuma-machi, Kanazawa, Ishikawa 920-1192 (Japan); Fukushima, Takehiro [Department of Information and Communication Engineering, Okayama Prefectural University, 111 Kuboki, Soja, Okayama 719-1197 (Japan); Shinohara, Susumu; Arai, Kenichi [NTT Communication Science Laboratories, NTT Corporation, 2-4 Hikaridai, Seika-cho, Soraku-gun, Kyoto 619-0237 (Japan); Harayama, Takahisa [NTT Communication Science Laboratories, NTT Corporation, 2-4 Hikaridai, Seika-cho, Soraku-gun, Kyoto 619-0237 (Japan); Department of Mechanical Engineering, Toyo University, 2100 Kujirai, Kawagoe, Saitama 350-8585 (Japan)

    2014-06-16

    We propose a compact chaotic laser device, which consists of a semiconductor laser and a two-dimensional (2D) external cavity for delayed optical feedback. The overall size of the device is within 230 μm × 1 mm. A long time delay sufficient for chaos generation can be achieved with the small area by the multiple reflections at the 2D cavity boundary, and the feedback strength is controlled by the injection current to the external cavity. We experimentally demonstrate that a variety of output properties, including chaotic output, can be selectively generated by controlling the injection current to the external cavity.

  5. On the algebraic structure of rotationally invariant two-dimensional Hamiltonians on the noncommutative phase space

    Science.gov (United States)

    Falomir, H.; Pisani, P. A. G.; Vega, F.; Cárcamo, D.; Méndez, F.; Loewe, M.

    2016-02-01

    We study two-dimensional Hamiltonians in phase space with noncommutativity both in coordinates and momenta. We consider the generator of rotations on the noncommutative plane and the Lie algebra generated by Hermitian rotationally invariant quadratic forms of noncommutative dynamical variables. We show that two quantum phases are possible, characterized by the Lie algebras {sl}(2,{{R}}) or su(2) according to the relation between the noncommutativity parameters, with the rotation generator related with the Casimir operator. From this algebraic perspective, we analyze the spectrum of some simple models with nonrelativistic rotationally invariant Hamiltonians in this noncommutative phase space, such as the isotropic harmonic oscillator, the Landau problem and the cylindrical well potential.

  6. On the algebraic structure of rotationally invariant two-dimensional Hamiltonians on the noncommutative phase space

    CERN Document Server

    Falomir, H; Vega, F; Cárcamo, D; Méndez, F; Loewe, M

    2015-01-01

    We study two-dimensional Hamiltonians in phase space with noncommutativity both in coordinates and momenta. We consider the generator of rotations on the noncommutative plane and the Lie algebra generated by Hermitian rotationally invariant quadratic forms of noncommutative dynamical variables. We show that two quantum phases are possible, characterized by the Lie algebras $sl(2,\\mathbb{R})$ or $su(2)$ according to the relation between the noncommutativity parameters. From this perspective, we analyze the spectrum of some simple models with nonrelativistic rotationally invariant Hamiltonians in this noncommutative phase space, as the isotropic harmonic oscillator, the Landau problem and the cylindrical well potential.

  7. Synchronization of radiation in an oversized coaxial Ka-band backward wave oscillator using two-dimensional Bragg structure

    Directory of Open Access Journals (Sweden)

    N. S. Ginzburg

    2015-12-01

    Full Text Available A coaxial Ka-band backward wave oscillator with a two-dimensional Bragg structure located at the output of the interaction space has been studied. This structure has a double-period corrugation and provides azimuthal electromagnetic energy fluxes, which act on the synchronized radiation of an oversized tubular electron beam. Proof-of-principle experiments were conducted based on the Saturn thermionic accelerator (300  keV/200  A/2  μs. In accordance with simulations, narrow-band generation was obtained at a frequency of 30 GHz and a power level of 1.5–2 MW. As a result, the possibility of using a two-dimensional distributed feedback mechanism in oscillators of the Cherenkov type has been demonstrated.

  8. Optical generation of a spatially variant two-dimensional lattice structure by using a phase only spatial light modulator

    CERN Document Server

    Kumar, Manish

    2016-01-01

    We propose a simple and straightforward method to generate a spatially variant lattice structures by optical interference lithography method. Using this method, it is possible to independently vary the orientation and period of the two-dimensional lattice. The method consists of two steps which are: numerical synthesis of corresponding phase mask by employing a two-dimensional integrated gradient calculations and experimental implementation of synthesized phase mask by making use of a phase only spatial light modulator in an optical 4f Fourier filtering setup. As a working example, we provide the experimental fabrication of a spatially variant square lattice structure which has the possibility to guide a Gaussian beam through a 90{\\deg} bend by photonic crystal self-collimation phenomena. The method is digitally reconfigurable, is completely scalable and could be extended to other kind of lattices as well.

  9. Optical generation of a spatially variant two-dimensional lattice structure by using a phase only spatial light modulator

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Manish, E-mail: manishk@physics.iitd.ac.in; Joseph, Joby, E-mail: joby@physics.iitd.ac.in [Photonics Research Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016 (India)

    2014-08-04

    We propose a simple and straightforward method to generate spatially variant lattice structures by optical interference lithography method. Using this method, it is possible to independently vary the orientation and period of the two-dimensional lattice. The method consists of two steps which are: numerical synthesis of corresponding phase mask by employing a two-dimensional integrated gradient calculations and experimental implementation of synthesized phase mask by making use of a phase only spatial light modulator in an optical 4f Fourier filtering setup. As a working example, we provide the experimental fabrication of a spatially variant square lattice structure which has the possibility to guide a Gaussian beam through a 90° bend by photonic crystal self-collimation phenomena. The method is digitally reconfigurable, is completely scalable, and could be extended to other kind of lattices as well.

  10. A molecular dynamics study on the structural and electronic properties of two-dimensional icosahedral B12 cluster based structures

    Science.gov (United States)

    Kah, Cherno Baba; Yu, M.; Jayanthi, C. S.; Wu, S. Y.

    2014-03-01

    Our previous study on one-dimensional icosahedral B12 cluster (α-B12) based chain [Bulletin of APS Annual Meeting, p265 (2013)] and ring structures has prompted us to study the two-dimensional (2D) α-B12 based structures. Recently, we have carried out a systematic molecular dynamics study on the structural stabilities and electronic properties of the 2D α-B12 based structures using the SCED-LCAO method [PRB 74, 15540 (2006)]. We have considered several types of symmetry for these 2D structures such as δ3, δ4, δ6 (flat triangular), and α' types. We have found that the optimized structures are energetically in the order of δ6 < α' < δ3 < δ4 which is different from the energy order of α'< δ6 < δ4 < δ3 found in the 2D boron monolayer sheets [ACS Nano 6, 7443 (2012)]. A detailed discussion of this study will be presented. The first author acknowledges the McSweeny Fellowship for supporting his research in this work.

  11. Selective cleavage of periodic mesoscale structures: two-dimensional replication of binary colloidal crystals into dimpled gold nanoplates.

    Science.gov (United States)

    Kuroda, Yoshiyuki; Sakamoto, Yasuhiro; Kuroda, Kazuyuki

    2012-05-23

    Specific crystallographic planes of binary colloidal crystals consisting of silica nanoparticles are two-dimensionally replicated on the surface of gold nanoplates. The selectivity of the surface patterns is explained by the geometrical characteristics of the binary colloidal crystals as templates. The binary colloidal crystals with the AlB(2)- and NaZn(13)-type structures are fabricated from aqueous dispersions of stoichiometrically mixed silica nanoparticles with different sizes. The stoichiometry is precisely controlled on the basis of a seed growth of silica nanoparticles. Dimpled gold nanoplates are formed by the two-dimensional growth of gold between partially cleaved surfaces of templates. The selectivity of the surface patterns is explained using the AlB(2)-type binary colloidal crystal as a template. The surface pattern is determined by the preferential cleavage of the plane with the lowest density of particle-particle connections. The tendency to form well-defined cleavage in binary colloidal crystals is crucial to formation of dimpled gold nanoplates, which is explained using the NaZn(13)-type binary colloidal crystal as a template. Its complex structure does not show well-defined cleavage, and only distorted nanoplates are obtained. Therefore, the mechanism of the two-dimensional replication of binary colloidal crystals is reasonably explained on the basis of their periodic mesoscale structures and crystal-like properties.

  12. Studies on metal-dielectric plasmonic structures.

    Energy Technology Data Exchange (ETDEWEB)

    Chettiar, Uday K. (Purdue University, West Lafayette, IN); Liu, Zhengtong (Purdue University, West Lafayette, IN); Thoreson, Mark D. (Purdue University, West Lafayette, IN); Shalaev, Vladimir M. (Purdue University, West Lafayette, IN); Drachev, Vladimir P. (Purdue University, West Lafayette, IN); Pack, Michael Vern; Kildishev, Alexander V. (Purdue University, West Lafayette, IN); Nyga, Piotr (Purdue University, West Lafayette, IN)

    2010-01-01

    The interaction of light with nanostructured metal leads to a number of fascinating phenomena, including plasmon oscillations that can be harnessed for a variety of cutting-edge applications. Plasmon oscillation modes are the collective oscillation of free electrons in metals under incident light. Previously, surface plasmon modes have been used for communication, sensing, nonlinear optics and novel physics studies. In this report, we describe the scientific research completed on metal-dielectric plasmonic films accomplished during a multi-year Purdue Excellence in Science and Engineering Graduate Fellowship sponsored by Sandia National Laboratories. A variety of plasmonic structures, from random 2D metal-dielectric films to 3D composite metal-dielectric films, have been studied in this research for applications such as surface-enhanced Raman sensing, tunable superlenses with resolutions beyond the diffraction limit, enhanced molecular absorption, infrared obscurants, and other real-world applications.

  13. Structural Transformations in Two-Dimensional Transition-Metal Dichalcogenide MoS2 under an Electron Beam

    DEFF Research Database (Denmark)

    Kretschmer, Silvan; Komsa, Hannu-Pekka; Bøggild, Peter

    2017-01-01

    The polymorphism of two-dimensional (w2D) transition-metal dichalcogenides (TMDs) and different electronic properties of the polymorphs make TMDs particularly promising materials in the context of applications in electronics. Recently, local transformations from the semiconducting trigonal prisma...... development and optimization of electron-beam-mediated engineering of the atomic structure and electronic properties of 2D TMDs with subnanometer resolution.......The polymorphism of two-dimensional (w2D) transition-metal dichalcogenides (TMDs) and different electronic properties of the polymorphs make TMDs particularly promising materials in the context of applications in electronics. Recently, local transformations from the semiconducting trigonal...... prismatic H phase to the metallic octahedral T phase in 2D MoS2 have been induced by electron irradiation [Nat. Nanotech. 2014, 9, 391], but the mechanism of the transformations remains elusive. Using density functional theory calculations, we study the energetics of the stable and metastable phases of 2D...

  14. Two-dimensional artificial light-harvesting antennae with predesigned high-order structure and robust photosensitising activity

    Science.gov (United States)

    Feng, Xiao; Ding, Xuesong; Chen, Long; Wu, Yang; Liu, Lili; Addicoat, Matthew; Irle, Stephan; Dong, Yuping; Jiang, Donglin

    2016-09-01

    Highly ordered discrete assemblies of chlorophylls that are found in natural light-harvesting antennae are key to photosynthesis, which converts light energy to chemical energy and is the principal producer of organic matter on Earth. Porphyrins and phthalocyanines, which are analogues of chlorophylls, exhibit a strong absorbance of visible and near-infrared light, respectively. A highly ordered porphyrin-co-phthalocyanine antennae would harvest photons over the entire solar spectrum for chemical transformation. However, such a robust antennae has not yet been synthesised. Herein, we report a strategy that merges covalent bonds and noncovalent forces to produce highly ordered two-dimensional porphyrin-co-phthalocyanine antennae. This methodology enables control over the stoichiometry and order of the porphyrin and phthalocyanine units; more importantly, this approach is compatible with various metalloporphyrin and metallophthalocyanine derivatives and thus may lead to the generation of a broad structural diversity of two-dimensional artificial antennae. These ordered porphyrin-co-phthalocyanine two-dimensional antennae exhibit unique optical properties and catalytic functions that are not available with single-component or non-structured materials. These 2D artificial antennae exhibit exceptional light-harvesting capacity over the entire solar spectrum as a result of a synergistic light-absorption effect. In addition, they exhibit outstanding photosensitising activities in using both visible and near-infrared photons for producing singlet oxygen.

  15. Observation of mesoscopic crystalline structures in a two-dimensional Rydberg gas

    CERN Document Server

    Schauß, Peter; Endres, Manuel; Fukuhara, Takeshi; Hild, Sebastian; Omran, Ahmed; Pohl, Thomas; Gross, Christian; Kuhr, Stefan; Bloch, Immanuel

    2012-01-01

    The ability to control and tune interactions in ultracold atomic gases has paved the way towards the realization of new phases of matter. Whereas experiments have so far achieved a high degree of control over short-ranged interactions, the realization of long-range interactions would open up a whole new realm of many-body physics and has become a central focus of research. Rydberg atoms are very well-suited to achieve this goal, as the van der Waals forces between them are many orders of magnitude larger than for ground state atoms. Consequently, the mere laser excitation of ultracold gases can cause strongly correlated many-body states to emerge directly when atoms are transferred to Rydberg states. A key example are quantum crystals, composed of coherent superpositions of different spatially ordered configurations of collective excitations. Here we report on the direct measurement of strong correlations in a laser excited two-dimensional atomic Mott insulator using high-resolution, in-situ Rydberg atom imag...

  16. Quantifying Resonant Structure in NGC 6946 from Two-dimensional Kinematics

    CERN Document Server

    Fathi, Kambiz; Falcón-Barroso, Jesús; Beckman, John E; Hernandez, Olivier; Daigle, Olivier; Carignan, Claude; de Zeeuw, Tim

    2007-01-01

    We study the two-dimensional kinematics of the H-alpha-emitting gas in the nearby barred Scd galaxy, NGC 6946, in order to determine the pattern speed of the primary m=2 perturbation mode. The pattern speed is a crucial parameter for constraining the internal dynamics, estimating the impact velocities of the gravitational perturbation at the resonance radii, and to set up an evolutionary scenario for NGC 6946. Our data allows us to derive the best fitting kinematic position angle and the geometry of the underlying gaseous disk, which we use to derive the pattern speed using the Tremaine-Weinberg method. We find a main pattern speed Omega_p=22 km/s/kpc, but our data clearly reveal the presence of an additional pattern speed Omega_p=47 km/s/kpc in a zone within 1.25 kpc of the nucleus. Using the epicyclic approximation, we deduce the location of the resonance radii and confirm that inside the outer Inner Lindblad Resonance radius of the main oval, a primary bar has formed rotating at more than twice the outer p...

  17. Quantifying Resonant Structure in NGC 6946 from Two-dimensional Kinematics

    Science.gov (United States)

    Fathi, Kambiz; Toonen, Silvia; Falcón-Barroso, Jesús; Beckman, John E.; Hernandez, Olivier; Daigle, Olivier; Carignan, Claude; de Zeeuw, Tim

    2007-10-01

    We study the two-dimensional kinematics of the Hα-emitting gas in the nearby barred Scd galaxy NGC 6946, in order to determine the pattern speed of the primary m=2 perturbation mode. The pattern speed is a crucial parameter for constraining the internal dynamics, estimating the impact velocities of the gravitational perturbation at the resonance radii, and setting up an evolutionary scenario for NGC 6946. Our data allow us to derive the best-fitting kinematic position angle and the geometry of the underlying gaseous disk, which we use to derive the pattern speed using the Tremaine-Weinberg method. We find a main pattern speed ΩPp=22+4-1 km s-1 kpc-1, but our data clearly reveal the presence of an additional pattern speed ΩSp=47+3-2 km s-1 kpc-1 in a zone within 1.25 kpc of the nucleus. Using the epicyclic approximation, we deduce the location of the resonance radii and confirm that inside the outer inner Lindblad resonance radius of the main oval, a primary bar has formed rotating at more than twice the outer pattern speed. We further confirm that a nuclear bar has formed inside the inner Lindblad resonance radius of the primary bar, coinciding with the inner inner Lindblad resonance radius of the large-scale m=2 mode oval.

  18. The octamer motif in immunoglobulin genes: extraction of structural constraints from two-dimensional NMR studies.

    Science.gov (United States)

    Weisz, K; Shafer, R H; Egan, W; James, T L

    1992-08-25

    Phase-sensitive two-dimensional nuclear Overhauser enhancement (2D NOE) and double-quantum-filtered correlated (2QF-COSY) spectra were recorded at 500 MHz for the DNA duplex d(CATTTGCATC).d(GATGCAAATG), which contains the octamer element of immunoglobulin genes. Exchangeable and nonexchangeable proton resonances including those of the H5' and H5" protons were assigned. Overall, the decamer duplex adopts a B-type DNA conformation. Scalar coupling constants for the sugar protons were determined by quantitative simulations of 2QF-COSY cross-peaks. These couplings are consistent with a two-state dynamic equilibrium between a minor N- and a major S-type conformer for all residues. The pseudorotation phase angle P of the major conformer is in the range 117-135 degrees for nonterminal pyrimidine nucleotides and 153-162 degrees for nonterminal purine nucleotides. Except for the terminal residues, the minor conformer comprises less than 25% of the population. Distance constraints obtained by a complete relaxation matrix analysis of the 2D NOE intensities with the MARDIGRAS algorithm confirm the dependence of the sugar pucker on pyrimidine and purine bases. Averaging by fast local motions has at most small effects on the NOE-derived interproton distances.

  19. Reconstruction of two-dimensional molecular structure with laser-induced electron diffraction from laser-aligned polyatomic molecules

    Science.gov (United States)

    Yu, Chao; Wei, Hui; Wang, Xu; Le, Anh-Thu; Lu, Ruifeng; Lin, C. D.

    2015-01-01

    Imaging the transient process of molecules has been a basic way to investigate photochemical reactions and dynamics. Based on laser-induced electron diffraction and partial one-dimensional molecular alignment, here we provide two effective methods for reconstructing two-dimensional structure of polyatomic molecules. We demonstrate that electron diffraction images in both scattering angles and broadband energy can be utilized to retrieve complementary structure information, including positions of light atoms. With picometre spatial resolution and the inherent femtosecond temporal resolution of lasers, laser-induced electron diffraction method offers significant opportunities for probing atomic motion in a large molecule in a typical pump-probe measurement. PMID:26503116

  20. A Pseudospectral Time-Domain Algorithm for Calculating the Band Structure of a Two-Dimensional Photonic Crystal

    Institute of Scientific and Technical Information of China (English)

    何江平; 沈林放; 张全; 何赛灵

    2002-01-01

    A pseudospectral time-domain (PSTD) method is developed for calculating the band structure of a two-dimensional photonic crystal. Maxwell's equations are rewritten in terms of period fields by using the Bloch theorem. Instead of spatial finite differences, the fast Fourier transform is used to calculate the spatial derivatives. To reach a similar accuracy, fewer sample points are required in the present PSTD method as compared to the conventional finite-difference time-domain methods. Our numerical simulation shows that the present PSTD method is an efficient and accurate method for calculating the band structure of a photonic crystal.

  1. A humidity sensitive two-dimensional tunable amorphous photonic structure in the bivalve ligament of Meretrix linnaeus.

    Science.gov (United States)

    Zhang, Weigang; Zhang, Gangsheng

    2015-12-01

    A humidity sensitive two-dimensional tunable amorphous photonic structure (2D TAPS) in the bivalve ligament of Meretrix linnaeus (LML) was reported in this paper. The structural color and microstructure of LML were investigated by reflection spectra and scanning electron microscopy, respectively. The results indicate that the LML has complex structural colors from blue to orange in the wet state from ventral to dorsal, which are derived from the aragonite fiber diameter increases continuously from ventral to dorsal of the ligament. The reflection peak wavelength of the wet LML can blue-shift from 522 nm to 480 nm with the air drying time increased from 0 to 60 min, while the reflectivity decreases gradually and only a weak reflection peak at last, relevant color changes from green to light blue. The structural color in the LML is produced by a two-dimensional amorphous photonic structure consists of aligned aragonite fibers and proteins, in which the diameters of the aragonite fiber and the inter-fiber spacing are 104±11 nm and 126±16 nm, respectively. Water can reversibly tune the reflection peak wavelength and reflectivity of this photonic structure, and the regulation achieved through dynamically tune the degree of order and lattice constant of the ligament in the different wet states.

  2. A study of frequency band structure in two-dimensional homogeneous anisotropic phononic K3-metamaterials

    Science.gov (United States)

    Gorshkov, V. N.; Navadeh, N.; Fallah, A. S.

    2017-09-01

    Phononic metamaterials are synthesised materials in which locally resonant units are arranged in a particular geometry of a substratum lattice and connected in a predefined topology. This study investigates dispersion surfaces in two-dimensional anisotropic acoustic metamaterials involving mass-in-mass units connected by massless springs in K3 topology. The reasons behind the particular choice of this topology are explained. Two sets of solutions for the eigenvalue problem | {\\boldsymbol{D}}({ω }2,{\\boldsymbol{k}})| =0 are obtained and the existence of absolutely different mechanisms of gap formation between acoustic and optical surface frequencies is shown as a bright display of quantum effects like strong coupling, energy splitting, and level crossings in classical mechanical systems. It has been concluded that a single dimensionless parameter i.e. relative mass controls the order of formation of gaps between different frequency surfaces. If the internal mass of the locally resonant mass-in-mass unit, m, increases relative to its external mass, M, then the coupling between the internal and external vibrations in the whole system rises sharply, and a threshold {μ }* is reached so that for m/M> {μ }* the optical vibrations break the continuous spectrum of ‘acoustic phonons’ creating the gap between them for any value of other system parameters. The methods to control gap parameters and polarisation properties of the optical vibrations created over these gaps were investigated. Dependencies of morphology and width of gaps for several anisotropic cases have been expounded and the physical meaning of singularity at the point of tangential contact between two adjacent frequency surfaces has been provided. Repulsion between different frequency band curves, as planar projections of surfaces, has been explained. The limiting case of isotropy has been discussed and it has been shown that, in the isotropic case, the lower gap always forms, irrespective of the value

  3. A humidity sensitive two-dimensional tunable amorphous photonic structure in the outer layer of bivalve ligament from Sunset Siliqua.

    Science.gov (United States)

    Zhang, Weigang; Zhang, Gangsheng

    2015-01-01

    A humidity sensitive two-dimensional tunable amorphous photonic structure (2D TAPS) in the outer layer of bivalve ligament from Sunset Siliqua (OLLS) was reported in this paper. The structural color and microstructure of OLLS were investigated by reflection spectra and scanning electron microscopy, respectively. The results indicate that the reflection peak wavelength of the wet OLLS blue-shifts from 454 nm to 392 nm with the increasing of air drying time from 0 to 40 min, while the reflectivity decreases gradually and vanishes at last, relevant color changes from blue to black background color. The structural color in the OLLS is produced by a two-dimensional amorphous photonic structure consisting of aligned protein fibers, in which the diameter of protein fiber and the inter-fiber spacing are 101 ± 12 nm. Water can reversibly tune the reflection peak wavelength and reflectivity of this photonic structure, and the regulation achieved through dynamically tuning the interaction between inter-fiber spacing and average refractive index.

  4. Atomic structure and electronic properties of the two-dimensional (Au ,Al )/Si (111 )2 ×2 compound

    Science.gov (United States)

    Gruznev, D. V.; Bondarenko, L. V.; Matetskiy, A. V.; Tupchaya, A. Y.; Chukurov, E. N.; Hsing, C. R.; Wei, C. M.; Eremeev, S. V.; Zotov, A. V.; Saranin, A. A.

    2015-12-01

    A combination of scanning tunneling microscopy, angle-resolved photoelectron spectroscopy, ab initio random structure searching, and density functional theory electronic structure calculations was applied to elucidate the atomic arrangement and electron band structure of the (Au ,Al )/Si (111 )2 ×2 two-dimensional compound formed upon Al deposition onto the mixed 5 ×2 /√{3 }×√{3 } Au/Si(111) surface. It was found that the most stable 2 ×2 -(Au, Al) compound incorporates four Au atoms, three Al atoms, and two Si atoms per 2 ×2 unit cell. Its atomic arrangement can be visualized as an array of meandering Au atomic chains with two-thirds of the Al atoms incorporated into the chains and one-third of the Al atoms interconnecting the chains. The compound is metallic and its electronic properties can be controlled by appropriate Al dosing since energetic location of the bands varies by ˜0.5 eV during increasing of Al contents. The 2 ×2 -(Au, Al) structure appears to be lacking the C3 v symmetry typical for the hexagonal lattices. The consequence of the peculiar atomic structure of the two-dimensional alloy is spin splitting of the metallic states, which should lead to anisotropy of the current-induced in-plane spin polarization.

  5. Tunable plasmon lensing in graphene-based structure exhibiting negative refraction

    Science.gov (United States)

    Zhong, Shifeng; Lu, Yanxin; Li, Chao; Xu, Haixia; Shi, Fenghua; Chen, Yihang

    2017-02-01

    We propose a novel method to achieve tunable plasmon focusing in graphene/photonic-crystal hybrid structure exhibiting all-angle negative refraction at terahertz frequencies. A two-dimensional photonic crystal composed of a square lattice of dielectric rods is constructed on the substrate of a graphene sheet to provide the hyperbolic dispersion relations of the graphene plasmon, giving rise to the all-angle plasmonic negative refraction. Plasmon lensing induced from the negative refraction is observed. We show that the ultracompact graphene-based system can produce sub-diffraction-limited images with the resolution significant smaller than the wavelength of the incident terahertz wave. Moreover, by adjusting the Fermi energy of the graphene, the imaging performance of the proposed system can remain almost invariant for different frequencies. Our results may find applications in diverse fields such as subwavelength spatial light manipulation, biological imaging, and so forth.

  6. Tunable plasmon lensing in graphene-based structure exhibiting negative refraction

    Science.gov (United States)

    Zhong, Shifeng; Lu, Yanxin; Li, Chao; Xu, Haixia; Shi, Fenghua; Chen, Yihang

    2017-01-01

    We propose a novel method to achieve tunable plasmon focusing in graphene/photonic-crystal hybrid structure exhibiting all-angle negative refraction at terahertz frequencies. A two-dimensional photonic crystal composed of a square lattice of dielectric rods is constructed on the substrate of a graphene sheet to provide the hyperbolic dispersion relations of the graphene plasmon, giving rise to the all-angle plasmonic negative refraction. Plasmon lensing induced from the negative refraction is observed. We show that the ultracompact graphene-based system can produce sub-diffraction-limited images with the resolution significant smaller than the wavelength of the incident terahertz wave. Moreover, by adjusting the Fermi energy of the graphene, the imaging performance of the proposed system can remain almost invariant for different frequencies. Our results may find applications in diverse fields such as subwavelength spatial light manipulation, biological imaging, and so forth. PMID:28150750

  7. Synthesis of two-dimensional TlxBi1−x compounds and Archimedean encoding of their atomic structure

    Science.gov (United States)

    Gruznev, Dimitry V.; Bondarenko, Leonid V.; Matetskiy, Andrey V.; Mihalyuk, Alexey N.; Tupchaya, Alexandra Y.; Utas, Oleg A.; Eremeev, Sergey V.; Hsing, Cheng-Rong; Chou, Jyh-Pin; Wei, Ching-Ming; Zotov, Andrey V.; Saranin, Alexander A.

    2016-01-01

    Crystalline atomic layers on solid surfaces are composed of a single building block, unit cell, that is copied and stacked together to form the entire two-dimensional crystal structure. However, it appears that this is not an unique possibility. We report here on synthesis and characterization of the one-atomic-layer-thick TlxBi1−x compounds which display quite a different arrangement. It represents a quasi-periodic tiling structures that are built by a set of tiling elements as building blocks. Though the layer is lacking strict periodicity, it shows up as an ideally-packed tiling of basic elements without any skips or halting. The two-dimensional TlxBi1−x compounds were formed by depositing Bi onto the Tl-covered Si(111) surface where Bi atoms substitute appropriate amount of Tl atoms. Atomic structure of each tiling element as well as arrangement of TlxBi1−x compounds were established in a detail. Electronic properties and spin texture of the selected compounds having periodic structures were characterized. The shown example demonstrates possibility for the formation of the exotic low-dimensional materials via unusual growth mechanisms. PMID:26781340

  8. Synthesis of two-dimensional TlxBi1-x compounds and Archimedean encoding of their atomic structure

    Science.gov (United States)

    Gruznev, Dimitry V.; Bondarenko, Leonid V.; Matetskiy, Andrey V.; Mihalyuk, Alexey N.; Tupchaya, Alexandra Y.; Utas, Oleg A.; Eremeev, Sergey V.; Hsing, Cheng-Rong; Chou, Jyh-Pin; Wei, Ching-Ming; Zotov, Andrey V.; Saranin, Alexander A.

    2016-01-01

    Crystalline atomic layers on solid surfaces are composed of a single building block, unit cell, that is copied and stacked together to form the entire two-dimensional crystal structure. However, it appears that this is not an unique possibility. We report here on synthesis and characterization of the one-atomic-layer-thick TlxBi1-x compounds which display quite a different arrangement. It represents a quasi-periodic tiling structures that are built by a set of tiling elements as building blocks. Though the layer is lacking strict periodicity, it shows up as an ideally-packed tiling of basic elements without any skips or halting. The two-dimensional TlxBi1-x compounds were formed by depositing Bi onto the Tl-covered Si(111) surface where Bi atoms substitute appropriate amount of Tl atoms. Atomic structure of each tiling element as well as arrangement of TlxBi1-x compounds were established in a detail. Electronic properties and spin texture of the selected compounds having periodic structures were characterized. The shown example demonstrates possibility for the formation of the exotic low-dimensional materials via unusual growth mechanisms.

  9. Synthesis of two-dimensional Tl(x)Bi(1-x) compounds and Archimedean encoding of their atomic structure.

    Science.gov (United States)

    Gruznev, Dimitry V; Bondarenko, Leonid V; Matetskiy, Andrey V; Mihalyuk, Alexey N; Tupchaya, Alexandra Y; Utas, Oleg A; Eremeev, Sergey V; Hsing, Cheng-Rong; Chou, Jyh-Pin; Wei, Ching-Ming; Zotov, Andrey V; Saranin, Alexander A

    2016-01-19

    Crystalline atomic layers on solid surfaces are composed of a single building block, unit cell, that is copied and stacked together to form the entire two-dimensional crystal structure. However, it appears that this is not an unique possibility. We report here on synthesis and characterization of the one-atomic-layer-thick Tl(x)Bi(1-x) compounds which display quite a different arrangement. It represents a quasi-periodic tiling structures that are built by a set of tiling elements as building blocks. Though the layer is lacking strict periodicity, it shows up as an ideally-packed tiling of basic elements without any skips or halting. The two-dimensional Tl(x)Bi(1-x) compounds were formed by depositing Bi onto the Tl-covered Si(111) surface where Bi atoms substitute appropriate amount of Tl atoms. Atomic structure of each tiling element as well as arrangement of Tl(x)Bi(1-x) compounds were established in a detail. Electronic properties and spin texture of the selected compounds having periodic structures were characterized. The shown example demonstrates possibility for the formation of the exotic low-dimensional materials via unusual growth mechanisms.

  10. The spin structure of the proton at low $x$ and low $Q^2$ in two-dimensional bins from COMPASS

    CERN Document Server

    Nunes, A.S.

    2016-01-01

    The longitudinal double spin asymmetries $A_1^p$ and the spin dependent structure function of the proton $g_1^p$ were extracted from COMPASS data in the region of low Bjorken scaling variable $x$ and low photon virtuality $Q^2$. The data were taken in 2007 and 2011 from scattering of polarised muons off polarised protons, resulting in a sample that is 150 times larger than the one from the previous experiment SMC that pioneered studies in this kinematic region. For the first time, $A_1^p$ and $g_1^p$ were evaluated in this region in two-dimensional bins of kinematic variables: $(x,Q^2)$, $(\

  11. Structure analysis of aromatic medicines containing nitrogen using near-infrared spectroscopy and generalized two-dimensional correlation spectroscopy

    Science.gov (United States)

    Liu, Hao; Gao, Hongbin; Qu, Lingbo; Huang, Yanping; Xiang, Bingren

    2008-12-01

    Four aromatic medicines (acetaminophen; niacinamide; p-aminophenol; nicotinic acid) containing nitrogen were investigated by FT-NIR (Fourier transform near-infrared) spectroscopy and generalized two-dimensional (2D) correlation spectroscopy. The FT-NIR spectra were measured over a temperature range of 30-130 °C. By combining near-infrared spectroscopy, generalized 2D correlation spectroscopy and references, the molecular structures (especially the hydrogen bond related with nitrogen) were analyzed and the NIR band assignments were performed. The results will be helpful to the understanding of aromatic medicines containing nitrogen and the utility of these substances.

  12. Design of a Photonic-Crystal Channel-Drop Filter Based on the Two-Dimensional Triangular-Lattice Hole Structure

    Institute of Scientific and Technical Information of China (English)

    Kyu; Hwan; Hwang; G.; Hugh; Song; Chanmook; Lim; Soan; Kim; Kyung-Won; Chun; Mahn; Yong; Park

    2003-01-01

    A channel-drop filter has been designed based on the two-dimensional triangular-lattice hole photonic-crystal structure, which consists of two line defects and two point defects, by a two-dimensional finite-difference time-domain simulation.

  13. Effect of solvent evaporation temperature on the structure of two-dimensional melamine networks on Au(111)

    Science.gov (United States)

    Okada, Arifumi; Nakata, Yohei; Minou, Kosuke; Yoshimura, Masamichi; Kadono, Kohei

    2016-12-01

    By scanning tunneling microscopy (STM), we investigated two-dimensional (2D) structures of melamine formed on Au(111) surfaces by solvent evaporation. By increasing the evaporation temperature, the well-known ordered honeycomb 2D molecular phase, in which all molecules are linked by hydrogen bonding, changes to four coexisting phases, i.e., a 2D network consisting of linear segments, 1D molecular rows, and hexagonal and distorted hexagonal structures. The first two phases are sometimes observed in ultrahigh vacuum (UHV) on metallic substrates other than Au. The last two phases have lattice parameters close to those of the well-known honeycomb structure. The structural change observed in this study is attributed to local temperature and concentration distributions of the solution and substrate surface during solvent evaporation. From the results, we found that the molecular nanostructures can be tailored by the solvent evaporation method with small changes in temperature.

  14. Design, fabrication, and characterization of lightweight and broadband microwave absorbing structure reinforced by two dimensional composite lattice

    Science.gov (United States)

    Chen, Mingji; Pei, Yongmao; Fang, Daining

    2012-07-01

    Microwave absorbing structures (MASs) reinforced by two dimensional (2D) composite lattice elements have been designed and fabricated. The density of these MASs is lower than 0.5 g/cm3. Experimental measurements show that the sandwich structure with glass fiber reinforced composite (GFRC) lattice core can serve as a broadband MAS with its reflectivity below -10 dB over the frequency range of 4-18 GHz. The low permittivity GFRC is indicated to be the proper material for both the structural element of the core and the transparent face sheet. Calculations by the periodic moment method (PMM) demonstrate that the 2D Kagome lattice performs better for microwave absorbing than the square one at relatively low frequencies. The volume fraction and cell size of the structural element are also revealed to be key factors for microwave absorbing performance.

  15. One- and Two-Dimensional Maximum Softening Indicators for Reinforced Concrete Structures under Seismic Excitation

    DEFF Research Database (Denmark)

    Nielsen, Søren R. K.; Köyüoglu, H. U.; Cakmak, A. S.

    The maximum softening concept is based on the variation of the vibrational periods of a structure during a seismic event. Maximum softening damage indicators, which measure the maximum relative stiffness reduction caused by stiffness and strength deterioration of the actual structure, are calcula......The maximum softening concept is based on the variation of the vibrational periods of a structure during a seismic event. Maximum softening damage indicators, which measure the maximum relative stiffness reduction caused by stiffness and strength deterioration of the actual structure...

  16. Phononic band gaps and vibrations in one- and two-dimensional mass-spring structures

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard

    2003-01-01

    The vibrational response of finite periodic lattice structures subjected to periodic loading is investigated. Special attention is devoted to the response in frequency ranges with gaps in the band structure for the corresponding infinite periodic lattice. The effects of boundaries, viscous dampin...

  17. Quantum ratchet effects induced by terahertz radiation in GaN-based two-dimensional structures

    NARCIS (Netherlands)

    Weber, W.; Golub, L. E.; Danilov, S. N.; Karch, J.; Reitmaier, C.; Wittmann, B.; Bel' kov, V. V.; Ivchenko, E. L.; Kvon, Z. D.; Vinh, N. Q.; van der Meer, A. F. G.; Murdin, B.; Ganichev, S. D.

    2008-01-01

    Photogalvanic effects are observed and investigated in wurtzite (0001)-oriented GaN/AlGaN low-dimensional structures excited by terahertz radiation. The structures are shown to represent linear quantum ratchets. Experimental and theoretical analysis exhibits that the observed photocurrents are relat

  18. Quantum ratchet effects induced by terahertz radiation in GaN-based two-dimensional structures

    Science.gov (United States)

    Weber, W.; Golub, L. E.; Danilov, S. N.; Karch, J.; Reitmaier, C.; Wittmann, B.; Bel'Kov, V. V.; Ivchenko, E. L.; Kvon, Z. D.; Vinh, N. Q.; van der Meer, A. F. G.; Murdin, B.; Ganichev, S. D.

    2008-06-01

    Photogalvanic effects are observed and investigated in wurtzite (0001)-oriented GaN/AlGaN low-dimensional structures excited by terahertz radiation. The structures are shown to represent linear quantum ratchets. Experimental and theoretical analysis exhibits that the observed photocurrents are related to the lack of an inversion center in the GaN-based heterojunctions.

  19. Phononic band gaps and vibrations in one- and two-dimensional mass-spring structures

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard

    2003-01-01

    The vibrational response of finite periodic lattice structures subjected to periodic loading is investigated. Special attention is devoted to the response in frequency ranges with gaps in the band structure for the corresponding infinite periodic lattice. The effects of boundaries, viscous dampin...

  20. Phononic band gaps and vibrations in one- and two-dimensional mass-spring structures

    Science.gov (United States)

    Jensen, J. S.

    2003-10-01

    The vibrational response of finite periodic lattice structures subjected to periodic loading is investigated. Special attention is devoted to the response in frequency ranges with gaps in the band structure for the corresponding infinite periodic lattice. The effects of boundaries, viscous damping, and imperfections are studied by analyzing two examples; a 1-D filter and a 2-D wave guide. In 1-D the structural response in the band gap is shown to be insensitive to damping and small imperfections. In 2-D the similar effect of damping is noted for one type of periodic structure, whereas for another type the band gap effect is nearly eliminated by damping. In both 1-D and 2-D it is demonstrated how the free structural boundaries affect the response in the band gap due to local resonances. Finally, 2-D wave guides are considered by replacing the periodic structure with a homogeneous structure in a straight and a 90° bent path, and it is shown how the vibrational response is confined to the paths in the band gap frequency ranges.

  1. Axis and velocity determination for quasi two-dimensional plasma/field structures from Faraday's law: A second look

    Science.gov (United States)

    Sonnerup, Bengt U. Ö.; Denton, Richard E.; Hasegawa, Hiroshi; Swisdak, M.

    2013-05-01

    We re-examine the basic premises of a single-spacecraft data analysis method, developed by Sonnerup and Hasegawa (2005), for determining the axis orientation and proper frame velocity of quasi two-dimensional, quasi-steady structures of magnetic field and plasma. The method, which is based on Faraday's law, makes use of magnetic and electric field data measured by a single spacecraft traversing the structure, although in many circumstances the convection electric field, - v × B, can serve as a proxy for E. It has been used with success for flux ropes observed at the magnetopause but has usually failed to provide acceptable results when applied to real space data from reconnection events as well as to virtual data from numerical MHD simulations of such events. In the present paper, the reasons for these shortcomings are identified, analyzed, and discussed in detail. Certain basic properties of the method are presented in the form of five theorems, the last of which makes use of singular value decomposition to treat the special case where the magnetic variance matrix is non-invertible. These theorems are illustrated using data from analytical models of flux ropes and also from MHD simulations as well as a 2-D kinetic simulation of reconnection. The results make clear that the method requires the presence of a significant, non-removable electric field distribution in the plane transverse to the invariant direction and that it is sensitive to deviations from strict two-dimensionality and strict time stationarity.

  2. When is high-dimensional scattering chaos essentially two dimensional? Measuring the product structure of singularities.

    Science.gov (United States)

    Drótos, G; Jung, C; Tél, T

    2012-11-01

    We demonstrate how the area of the enveloping surface of the scattering singularities in a three-degrees-of-freedom (3-dof) system depends on a perturbation parameter controlling the distance from a reducible case. This dependence is monotonic and approximately linear. Therefore it serves as a measure for this distance, which can be extracted from an investigation of the fractal structure. These features are a consequence of the dynamics being governed by normally hyperbolic invariant manifolds. We conclude that typical n-dof chaotic scattering exhibits either structures developing out of a stack of chaotic structures of 2-dof type or hardly any chaotic effects.

  3. Photonic Band Gaps in Two-Dimensional Crystals with Fractal Structure

    Institute of Scientific and Technical Information of China (English)

    刘征; 徐建军; 林志方

    2003-01-01

    We simulate the changes of the photonic band structure of the crystal in two dimensions with a quasi-fractal structure when it is fined to a fractal. The result shows that when the dielectric distribution is fined, the photonic band structure will be compressed on the whole and the ground photonic band gap (PBG) closed while the next PBGs shrunk, in conjunction with their position declining in the frequency spectrum. Furthermore, the PBGs in the high zone are much more sensitive than those in low zones.

  4. Optical modulators with two-dimensional layered materials

    CERN Document Server

    Sun, Zhipei; Wang, Feng

    2016-01-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as two-dimensional heterostructures, plasmonic structures, and silicon/fibre integrated structures. We also take a look at future perspectives and discuss the potential of yet relatively unexplored mechanisms such as magneto-optic and acousto-optic modulation.

  5. Electrostatic Structures in Space Plasmas: Stability of Two-dimensional Magnetic Bernstein-Greene-Kruskal Modes

    CERN Document Server

    Ng, C S; Yasin, E

    2011-01-01

    Electrostatic structures have been observed in many regions of space plasmas, including the solar wind, the magnetosphere, the auroral acceleration region, and in association with shocks, turbulence, and magnetic reconnection. Due to potentially large amplitude of electric fields within these structures, their effects on particle heating, scattering, or acceleration can be important. One possible theoretical description of some of these structures is the concept of Bernstein-Greene-Kruskal (BGK) modes, which are exact nonlinear solutions of the Vlasov-Poisson system of equations in collisionless kinetic theory. BGK modes have been studied extensively for many decades, predominately in one dimension (1D), although there have been observations showing that some of these structures have clear 3D features. While there have been approximate solutions of higher dimensional BGK modes, an exact 3D BGK mode solution in a finite magnetic field has not been found yet. Recently we have constructed exact solutions of 2D B...

  6. Study on two-dimensional equilibrium structure of magnetized complex plasmas based on a Langevin dynamics simulation

    Science.gov (United States)

    Kong, Wei; Yang, Fang; Liu, Songfen; Shi, Feng

    2016-10-01

    A Langevin dynamics simulation method is used to study the two-dimensional (2D) equilibrium structure of complex plasmas while considering an external magnetic field. The traditional Yukawa potential and a modified Yukawa potential according to Shukla et al. [Phys. Lett. A 291, 413 (2001); Shukla and Mendonca, Phys. Scr. T113 82 (2004)] and Salimullah et al. [Phys. Plasmas 10, 3047 (2003)] respectively, are employed to account for the interaction of the charged dust particles. It is found that the collisions between neutral gas and charged dust particles have minor effects on the 2D equilibrium structure of the system. Based on the modified Yukawa potential, studies on the 2D equilibrium structure show that the traditional Yukawa potential is still suitable for describing the magnetized complex plasmas, even if the shielding distance of charged dust particles is affected by the strong external magnetic field.

  7. Extracting structural information from the polarization dependence of one- and two-dimensional sum frequency generation spectra.

    Science.gov (United States)

    Laaser, Jennifer E; Zanni, Martin T

    2013-07-25

    We present ways in which pulse sequences and polarizations can be used to extract structural information from one- and two-dimensional vibrational sum frequency generation (2D SFG) spectra. We derive analytic expressions for the polarization dependence of systems containing coupled vibrational modes, and we present simulated spectra to identify the features of different molecular geometries. We discuss several useful polarization combinations for suppressing strong diagonal peaks and emphasizing weaker cross-peaks. We investigate unique capabilities of 2D SFG spectra for obtaining structural information about SFG-inactive modes and for identifying coupled achiral chromophores. This work builds on techniques that have been developed for extracting structural information from 2D IR spectra. This paper discusses how to utilize these concepts in 2D SFG experiments to probe multioscillator systems at interfaces. The sample code for calculating polarization dependence of 1D and 2D SFG spectra is provided in the Supporting Information .

  8. Analytical and Numerical Calculations of Two-Dimensional Dielectric Photonic Band Gap Structures and Cavities for Laser Acceleration

    CERN Document Server

    Samokhvalova, Ksenia R; Liang Qian, Bao

    2005-01-01

    Dielectric photonic band gap (PBG) structures have many promising applications in laser acceleration. For these applications, accurate determination of fundamental and high order band gaps is critical. We present the results of our recent work on analytical calculations of two-dimensional (2D) PBG structures in rectangular geometry. We compare the analytical results with computer simulation results from the MIT Photonic Band Gap Structure Simulator (PBGSS) code, and discuss the convergence of the computer simulation results to the analytical results. Using the accurate analytical results, we design a mode-selective 2D dielectric cylindrical PBG cavity with the first global band gap in the frequency range of 8.8812 THz to 9.2654 THz. In this frequency range, the TM01-like mode is shown to be well confined.

  9. Structured mirror array for two-dimensional collimation of a chromium beam in atom lithography

    Institute of Scientific and Technical Information of China (English)

    Zhang Wan-Jing; Ma Yan; Li Tong-Bao; Zhang Ping-Ping; Deng Xiao; Chen Sheng; Xiao Sheng-Wei

    2013-01-01

    Direct-write atom lithography,one of the potential nanofabrication techniques,is restricted by some difficulties in producing optical masks for the deposition of complex structures.In order to make further progress,a structured mirror array is developed to transversely collimate the chromium atomic beam in two dimensions.The best collimation is obtained when the laser red detunes by natural line-width of transition 7S3 → 7P40 of the chromium atom.The collimation ratio is 0.45 vertically (in x axis),and it is 0.55 horizontally (in y axis).The theoretical model is also simulated,and success of our structured mirror array is achieved.

  10. Unusual onset of p-element magnetization in a two dimensional structure

    Science.gov (United States)

    Matar, Samir F.

    2016-10-01

    Based on density functional theory electronic and magnetic structure characterizations an unusual onset of spin polarization of p states is demonstrated leading to a stable ferromagnetic order within a carbon layered honeycomb-like compound. Specifically structural relaxation of formerly studied C2N in 3D network and devised here in 2D layered AlB2-type derived structure shows that the resulting ordered compound maintains the hexagonal crystal symmetry with an exceptionally large c/a ratio leading to strong localization of N states along c and letting magnetization develop within N-pz orbitals with 1.1 μB per formula unit. Anisotropic antibonding interactions between C and N layers allow interpreting the results. The compound is energetically characterized in ferromagnetic ground state versus less stable anti-ferromagnetic order.

  11. Modeling and process design for laser interference lithography used in fabricating two-dimensional periodic structures

    NARCIS (Netherlands)

    Bostan, C.G.; Ridder, de R.M.; Dorssen, van I.; Wolferen, van H.A.G.M.; Kuipers, L.; Hulst, van N.F.

    2002-01-01

    Laser interference lithography (LIL) is a technique that can be successfully used for realization of 2D periodic structures, with excellent uniformity over large areas. However, detailed modeling is needed in order to extract the optimum design parameters. In this paper, we refer to a design procedu

  12. Simple vibration modeling of structural fuzzy with continuous boundary by including two-dimensional spatial memory

    DEFF Research Database (Denmark)

    Friis, Lars; Ohlrich, Mogens

    2008-01-01

    -dimensional continuous boundary. Additionally, a simple method for determining the so-called equivalent coupling factor is presented. The validity of this method is demonstrated by numerical simulations of the vibration response of a master plate structure with fuzzy attachments. It is revealed that the method performs...

  13. Fundamental interactions of vortical structures with boundary layers in two-dimensional flows

    DEFF Research Database (Denmark)

    Coutsias, E.A.; Lynov, Jens-Peter

    1991-01-01

    in the vorticity-stream function representation for bounded geometries. Fundamental processes connected to vorticity detachment from the boundary layers caused by the proximity of vortical structures are described. These processes include enstrophy enhancement of the main flow during bursting events, and pinning...

  14. Health Assessment of Large Two Dimensional Structures Using Limited Information: Recent Advances

    Directory of Open Access Journals (Sweden)

    Ajoy Kumar Das

    2012-01-01

    Full Text Available Some recent advances of a recently developed structural health assessment procedure proposed by the research team at the University of Arizona, commonly known as generalized iterative least-squares extended Kalman filter with unknown input (GILS-EKF-UI are presented. The procedure is a finite elements-based time-domain system-identification technique. It can assess structural health at the element level using only limited number of noise-contaminated responses. With the help of examples, it is demonstrated that the structure can be excited by multiple loadings simultaneously. The method can identify defects in various stages of degradation in single or multiple members and also relatively less severe defect. The defective element(s need not be in the substructure, but the defect detection capability increases if the defect spot is close to the substructure. Two alternatives are suggested to locate defect spot more accurately within a defective element. The paper advances several areas of GILS-EKF-UI to assess health of large structural systems.

  15. Study on the crystalline structure transition of syndiotactic polystyrene film during heat treatment by two-dimensional infrared correlation spectroscopy.

    Science.gov (United States)

    Li, Weizhen; Wu, Peiyi

    2009-08-01

    The crystal structure transition of syndiotactic polystyrene film from the helical conformation to the more stable planar zigzag conformation during a heating process was studied using Fourier transform infrared (FT-IR) spectroscopy in combination with two-dimensional (2D) correlation analysis and perturbation-correlation moving-window 2D analysis. The sequence of different conformations during the transition was investigated by analyzing two-dimensional FT-IR correlation spectra in the spectral ranges of 800-700 cm(-1) and 600-500 cm(-1). It was observed that the conformation of delta helical changes prior to gamma helical, and the gamma helical phase is faster than the alpha' planar zigzag phase. By utilizing the 2D asynchronous correlation spectra, the 744 cm(-1) band, which is usually incorporated in the broad 750 cm(-1) band, can now be uniquely attributed as the alpha' zigzag configuration for the first time. Furthermore, by employing thermal perturbation, the shorter helical segments consisting of m = 7-12 and m = 12-20 monomeric units were disturbed in a shorter time than the longer helical segments m = 20-30 during the heating process.

  16. Two-dimensional simulations of temperature and current-density distribution in electromigrated structures

    Science.gov (United States)

    Kießig, Birgit; Schäfer, Roland; von Löhneysen, Hilbert

    2014-01-01

    We report on the application of a feedback-controlled electromigration technique for the formation of nanometre-sized gaps in mesoscopic gold wires and rings. The effect of current density and temperature, linked via Joule heating, on the resulting gap size is investigated. Our experiments include in situ measurements of the evolution of the electrical resistance and of the structure of the device during electromigration. Experimentally, a good thermal coupling to the substrate turned out to be crucial to reach electrode spacings below 10 nm and to avoid overall melting of the nanostructures. This finding is supported by numerical calculations of the current-density and temperature profiles for structure layouts subjected to electromigration. The numerical method can be used for optimizing the layout so as to predetermine the location where electromigration leads to the formation of a gap.

  17. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure.

    Science.gov (United States)

    Rybin, Mikhail V; Samusev, Kirill B; Lukashenko, Stanislav Yu; Kivshar, Yuri S; Limonov, Mikhail F

    2016-08-05

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  18. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure

    Science.gov (United States)

    Rybin, Mikhail V.; Samusev, Kirill B.; Lukashenko, Stanislav Yu.; Kivshar, Yuri S.; Limonov, Mikhail F.

    2016-08-01

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  19. Structural analysis of lime wood biodegraded by white rot fungi through infrared and two dimensional correlation spectroscopy techniques

    Science.gov (United States)

    Popescu, Carmen-Mihaela; Gradinariu, Petronela; Popescu, Maria-Cristina

    2016-11-01

    The action of the white rot fungi Phanerochaete crisosporium on the structure of lime wood (Tilia cordata) has been studied. The degree of decay was determined by weight loss, which was of 37% after 110 days. The samples were further analyzed by infrared and two dimensional correlation spectroscopy. The recorded spectra for different intervals of decay indicate variations in the intensities and width or wavenumber shifts of the bands assigned, both, for lignin and carbohydrates. An increase in the intensities of the bands from the carbonyl region due to formation of new structures, accompanied by the reduction of the methoxyl and methyl/methylene groups in lignin was evidenced. Further, the differences between reference and decayed wood spectra were examined in detail using 2DCOS spectroscopy and the second derivative analysis and the sequential order of modifications were established.

  20. On the two-dimensional metallic state in silicon-on-insulator structures

    OpenAIRE

    Brunthaler, G.; Prinz, A.; Pillwein, G.; Lindelof, P. E.; Ahopelto, J.

    2002-01-01

    It is shown that the electronic conduction in silicon-on-insulator (SOI) layers exhibits a metallic regime which is very similar to that in high-mobility Si-metal oxide semiconductor structures (MOS). The peak in the electron mobility versus density, the strong drop in resistivity and the critical concentration for the metal-insulator transition are all consistent. On the basis of our SOI data for the temperature and in-plane magnetic field dependence of the resistivity, we discuss several mo...

  1. Photonic band structures of two-dimensional photonic crystals with deformed lattices

    Institute of Scientific and Technical Information of China (English)

    Cai Xiang-Hua; Zheng Wan-Hua; Ma Xiao-Tao; Ren Gang; Xia Jian-Bai

    2005-01-01

    Using the plane-wave expansion method, we have calculated and analysed the changes of photonic band structures arising from two kinds of deformed lattices, including the stretching and shrinking of lattices. The square lattice with square air holes and the triangular lattice with circular air holes are both studied. Calculated results show that the change of lattice size in some special ranges can enlarge the band gap, which depends strongly on the filling factor of air holes in photonic crystals; and besides, the asymmetric band edges will appear with the broken symmetry of lattices.

  2. Analysis of two-dimensional photonic band gap structure with a rhombus lattice

    Institute of Scientific and Technical Information of China (English)

    Limei Qi; Ziqiang Yang; Xi Gao; Zheng Liang

    2008-01-01

    @@ The relative band gap for a rhombus lattice photonic crystal is studied by plane wave expansion method and high frequency structure simulator (HFSS) simulation. General wave vectors in the first Briliouin zone are derived. The relative band gap as a function of air-filling factor and background material is investigated, respectively, and the nature of photonic band gap for different lattice angles is analyzed by the distribution of electric energy. These results would provide theoretical instruction for designing optical integrated devices using photonic crystal with a rhombus lattice.

  3. Two-dimensional analysis of coupled heat and moisture transport in masonry structures

    Science.gov (United States)

    Krejčí, Tomáš

    2016-06-01

    Reconstruction and maintenance of historical buildings and bridges require good knowledge of temperature and moisture distribution. Sharp changes in the temperature and moisture can lead to damage. This paper describes analysis of coupled heat and moisture transfer in masonry based on two-level approach. Macro-scale level describes the whole structure while meso-scale level takes into account detailed composition of the masonry. The two-level approach is very computationally demanding and it was implemented in parallel. The two-level approach was used in analysis of temperature and moisture distribution in Charles bridge in Prague, Czech Republic.

  4. Simulations of super-structure domain walls in two dimensional assemblies of magnetic nanoparticles

    DEFF Research Database (Denmark)

    Jordanovic, Jelena; Beleggia, Marco; Schiøtz, Jakob

    2015-01-01

    taking the role of the atomic spins. The coupling is, however, different. The superspins interact only by dipolar interactions as exchange coupling between individual nanoparticles may be neglected due to interparticle spacing. We observe that it is energetically favorable to introduce domain walls...... oriented along the long dimension of nanoparticle assemblies rather than along the short dimension. This is unlike what is typically observed in continuous magnetic materials, where the exchange interaction introduces an energetic cost proportional to the area of the domain walls. Structural disorder...

  5. Solution of the two-dimensional compressible Navier-Stokes equations on embedded structured multiblock meshes

    Science.gov (United States)

    Szmelter, J.; Marchant, M. J.; Evans, A.; Weatherill, N. P.

    A cell vertex finite volume Jameson scheme is used to solve the 2D compressible, laminar, viscous fluid flow equations on locally embedded multiblock meshes. The proposed algorithm is applicable to both the Euler and Navier-Stokes equations. It is concluded that the adaptivity method is very successful in efficiently improving the accuracy of the solution. Both the mesh generator and the flow equation solver which are based on a quadtree data structure offer good flexibility in the treatment of interfaces. It is concluded that methods under consideration lead to accurate flow solutions.

  6. Experimental investigation of the structure of supersonic two-dimensional air microjets

    Science.gov (United States)

    Timofeev, Ivan; Aniskin, Vladimir; Mironov, Sergey

    2016-10-01

    We have experimentally studied the structure of supersonic underexpanded room-temperature air jets escaping from micronozzles with characteristic heights from 47 to 175 µm and widths within 2410-3900 µm in a range of Reynolds numbers of 1280-9460. The dimensions of the first shock cell are established. The supersonic core length of supersonic underexpanded air jets has been determined for the first time. A flow regime with a large supersonic core length has observed for air jets escaping from a 47µm high nozzle.

  7. Aluminum plasmonic metamaterials for structural color printing.

    Science.gov (United States)

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-06-01

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  8. Two-dimensional crystal CuS—electronic and structural properties

    Science.gov (United States)

    Soares, Antonio L., Jr.; Dos Santos, Egon C.; Morales-García, A.; Heine, Thomas; De Abreu, Heitor A.; Duarte, Hélio A.

    2017-03-01

    Covellite is a metallic layered mineral with rather strong interlayer interaction. Recently, synthesis of covellite nanosheets of 3.2 nm thickness was reported (Du et al 2012 Nat. Commun. 3 1177), which raises the question: ‘What is the thinnest possible covellite nanosheet?’ Based on density functional/plane waves calculations, we have shown that graphene-like structure CuS (1L-CuS) is unstable but can be stabilized on a support. Here, however, we demonstrate that the three layered CuS (3L-CuS) with thickness of 0.773 nm (including the atomic radius of the outer plans atoms) is predicted to be intrinsically stable, as confirmed by phonon analysis and Born-Oppenheimer molecular dynamics simulations, with 3L-CuS about 0.15 eV per CuS less stable than the bulk. Interestingly, the electronic band structure shows metallic character with four bands crossing the Fermi level. The nature of chemical bonding is confirmed by a detailed topological analysis of the electron density.

  9. Two-dimensional imaging detectors for structural biology with X-ray lasers.

    Science.gov (United States)

    Denes, Peter

    2014-07-17

    Our ability to harness the advances in microelectronics over the past decade(s) for X-ray detection has resulted in significant improvements in the state of the art. Biology with X-ray free-electron lasers present daunting detector challenges: all of the photons arrive at the same time, and individual high peak power pulses must be read out shot-by-shot. Direct X-ray detection in silicon pixel detectors--monolithic or hybrid--are the standard for XFELs today. For structural biology, improvements are needed for today's 10-100 Hz XFELs, and further improvements are required for tomorrow's 10+ kHz XFELs. This article will discuss detector challenges, why they arise and ways to overcome them, along with the current state of the art. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  10. The topology of large-scale structure. V - Two-dimensional topology of sky maps

    Science.gov (United States)

    Gott, J. R., III; Mao, Shude; Park, Changbom; Lahav, Ofer

    1992-01-01

    A 2D algorithm is applied to observed sky maps and numerical simulations. It is found that when topology is studied on smoothing scales larger than the correlation length, the topology is approximately in agreement with the random phase formula for the 2D genus-threshold density relation, G2(nu) varies as nu(e) exp-nu-squared/2. Some samples show small 'meatball shifts' similar to those seen in corresponding 3D observational samples and similar to those produced by biasing in cold dark matter simulations. The observational results are thus consistent with the standard model in which the structure in the universe today has grown from small fluctuations caused by random quantum noise in the early universe.

  11. Structural soil crust development from raindrop impacts using two-dimensional discrete element method

    Science.gov (United States)

    Yeom, Seungcheol; Sjoblom, Kurt

    2016-12-01

    The mechanical nature of crust formation as a result of raindrop impacts was simulated within a discrete element modeling environment. Simulations were conducted in two-dimensions (2D) using both linear and non-linear elastic contact models. The 2D approach was found to minimize the computational effort required and maximize the number of particles in the soil profile. For the non-linear model, the effect of the coefficient of restitution (COR) for soil-rain and soil-soil was investigated. Finally, the comparison between the linear and nonlinear elastic contact model was presented. The simulation indicated that the COR for rain-soil had negligible effect on the crust development but the computational time was exponentially increased with increasing coefficient value. In contrast, the COR for soil-soil had a dominant influence on the crust development. To validate the numerical results, a micro computerized tomography (microCT) technique was applied to characterize the changes in pore structure to a USCS SP soil after exposure under a rainfall simulator. Additionally, the effect of cyclic wetting and drying (without rainfall) on the changes in porosity was investigated. The experimental results showed that the rainfall simulator sufficiently densified the soil but the effect of cyclic wetting and drying was negligible. The numerical simulations showed similar changes in porosity along the depth of the soil profile as compared with the experimental results thus validating the DEM technique to simulate crust development.

  12. BASIN STRUCTURE FROM TWO-DIMENSIONAL SEISMIC REFLECTION DATA, CRAZY MOUNTAINS BASIN, MONTANA

    Energy Technology Data Exchange (ETDEWEB)

    David J. Taylor

    2003-08-01

    Some 140 miles of multichannel seismic reflection data, acquired commercially in the 1970's, were reprocessed by the U.S. Geological Survey in late 2000 and early 2001 to interpret the subsurface geology of the Crazy Mountains Basin, an asymmetric Laramide foreland basin located in south-central Montana. The seismic data indicate that the northwestern basin margin is controlled by a thrust fault that places basement rocks over a thick (22,000 feet) sequence of Paleozoic and Mesozoic sedimentary rocks to the south. From the deep basin trough, Paleozoic through Tertiary rocks slope gently upward to the south and southeast. The northern boundary of the basin, which is not imaged well by the seismic data, appears to be folded over a basement ridge rather than being truncated against a fault plane. Seismic data along the basin margin to the south indicate that several fault controlled basement highs may have been created by thin-skinned tectonics where a series of shallow thrust faults cut Precambrian, Paleozoic, and early Mesozoic rocks, whereas, in contrast, Cretaceous and Tertiary strata are folded. The data are further interpreted to indicate that this fault-bounded asymmetric basin contains several structures that possibly could trap hydrocarbons, provided source rocks, reservoirs, and seals are present. In addition, faults in the deep basin trough may have created enough fracturing to enhance porosity, thus developing ''sweet spots'' for hydrocarbons in basin-centered continuous gas accumulations.

  13. Two Dimensional LIF Measurements and Potential Structure of Ion Beam Formation in an Argon Helicon Plasma

    Science.gov (United States)

    Aguirre, Evan; Scime, Earl; Good, Timothy

    2016-10-01

    We report 2-dimensional, spatially resolved observations of ion beam formation in an expanding helicon plasma. Previous studies found that a current free double layer (CFDL) spontaneously arises at low pressure, below 1 mT. We use Laser Induced Fluorescence (LIF), a non-perturbative diagnostic to measure the ion velocity distribution functions (IVDFs) of argon ions both parallel and perpendicular to the background magnetic field. We report ion beam formation as a function of the expansion chamber magnetic field (0-108 G). The ion beam appears peaked in the center of the expansion chamber and decays over a few centimeters radially. We also report the potential structure of the plasma obtained with a planar Langmuir probe. To obtain meaningful Langmuir probe measurements, averages of tens of current-voltage are needed to reduce the effects of large electrostatic fluctuations that arise in plasmas that generate ion beams. We report the dependence of density, electron temperature, and floating potential on radial and axial position in the expansion plume. NSF Award PHYS-1360278.

  14. Structure of growing microtubule ends: two-dimensional sheets close into tubes at variable rates.

    Science.gov (United States)

    Chrétien, D; Fuller, S D; Karsenti, E

    1995-06-01

    Observation of microtubule growth at different rates by cryo-electron microscopy reveals that the ends range from blunt to long, gently curved sheets. The mean sheet length increases with the growth rate while the width of the distributions increases with the extent of assembly. The combination of a concentration dependent growth rate of the tubulin sheet with a variable closure rate of the microtubule cylinder, results in a model in which stochastic fluctuations in sheet length and tubulin conformation confine GTP-tubulins to microtubule ends. We propose that the variability of microtubule growth rate observed by video microscopy (Gildersleeve, R. F., A. R. Cross, K. E. Cullen, A. P. Fagen, and R. C. Williams. 1992. J. Biol. Chem. 267: 7995-8006, and this study) is due to the variation in the rate of cylinder closure. The curvature of the sheets at the end of growing microtubules and the small oligomeric structures observed at the end of disassembling microtubules, indicate that tubulin molecules undergo conformational changes both during assembly and disassembly.

  15. Band structure of magneto-metallo-dielectric photonic crystals with hybrid one- and two-dimensional periodicity

    Energy Technology Data Exchange (ETDEWEB)

    Reyes-Ayona, E. [Instituto de Fisica, Benemerita Universidad Autonoma de Puebla, Apartado Postal J-48, Puebla 72570 (Mexico); Instituto Nacional de Astrofisica Optica y Electronica, Apartado Postal 51, Puebla 72000 (Mexico); Halevi, P. [Instituto Nacional de Astrofisica Optica y Electronica, Apartado Postal 51, Puebla 72000 (Mexico)

    2012-06-15

    We calculate the band structure of a magneto-metallo-dielectric photonic crystal (PC) with hybrid one- and two-dimensional periodicity. Namely, the permittivity (permeability) is periodic in a plane (single direction). The metallic and magnetic properties are described, respectively, by means of the Drude model and a specific permeability model for Barium-M ferrite. Because of the dispersion of both the permeability and the permittivity, we obtain a non-standard eigenvalue problem which is possible to solve by means of a linearization technique. We found that the first band of this PC is very sensitive to the filling fraction of the magnetic component: by changing this fraction from 0.20 to 0.16 the slope - and effective index of refraction - changes from positive to negative. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. Tuning the electronic structures and magnetism of two-dimensional porous C2N via transition metal embedding.

    Science.gov (United States)

    Du, Juan; Xia, Congxin; Xiong, Wenqi; Zhao, Xu; Wang, Tianxing; Jia, Yu

    2016-08-10

    Based on first-principles calculations, the electronic structures and magnetism are investigated in 3d transition metal (TM)-embedded porous two-dimensional (2D) C2N monolayers. Numerical results indicate that except Mn and Co atoms, other TM atoms can be embedded stably in the 2D C2N monolayer. Moreover, the magnetic moments of the TM-embedded C2N monolayer depend highly on the atomic number of the TM atoms. The Sc, Ti, V, Cr, Mn, Fe, Co and Ni atom-embedded C2N monolayers possess a ferromagnetic ground state, while embedding Cu can induce paramagnetic characteristics in the 2D C2N monolayer. Meanwhile, the Zn-embedded C2N monolayer exhibits a nonmagnetic ground state. These results indicate that the magnetism of 2D C2N monolayers can be tuned via embedding TM atoms.

  17. Geometrical approach in physical understanding of the Goos-Haenchen shift in one- and two-dimensional periodic structures.

    Science.gov (United States)

    Miri, Mehdi; Naqavi, Ali; Khavasi, Amin; Mehrany, Khashayar; Khorasani, Sina; Rashidian, Bizhan

    2008-12-15

    The Goos-Haenchen shift of a totally reflected beam at the planar interface of two dielectric media, as if the incident beam is reflected from beneath the interface between the incident and transmitted media, has been geometrically associated with the penetration of the incident photons in the less-dense forbidden transmission region. This geometrical approach is here generalized to analytically calculate the Goos-Haenchen shift in one- and two-dimensional periodic structures. Several numerical examples are presented, and the obtained results are successfully tested against the well-known Artman's formula. The proposed approach is shown to be a fast, simple, and efficient method that can provide good physical insight to the nature of the phenomenon.

  18. Generalized two-dimensional correlation near-infrared spectroscopy and principal component analysis of the structures of methanol and ethanol

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Liquid state methanol and ethanol under different temperatures have been investigated by FT-NIR(Fourier transform nearinfrared) spectroscopy,generalized two-dimensional(2D) correlation spectroscopy,and PCA(principal component analysis) . First,the FT-NIR spectra were measured over a temperature range of 30-64(or 30-71) °C,and then the 2D correlation spectra were computed.Combining near-infrared spectroscopy,generalized 2D correlation spectroscopy,and references,we analyzed the molecular structures(especially the hydrogen bond) of methanol and ethanol,and performed the NIR band assignments. The PCA method was employed to verify the results of the 2D analysis.This study will be helpful to the understanding of these reagents.

  19. Assessment of the micro-structure and depletion potentials in two-dimensional binary mixtures of additive hard-disks

    Science.gov (United States)

    Perera-Burgos, Jorge Adrián; Méndez-Alcaraz, José Miguel; Pérez-Ángel, Gabriel; Castañeda-Priego, Ramón

    2016-09-01

    Depletion forces are a particular class of effective interactions that have been mainly investigated in binary mixtures of hard-spheres in bulk. Although there are a few contributions that point toward the effects of confinement on the depletion potential, little is known about such entropic potentials in two-dimensional colloidal systems. From theoretical point of view, the problem resides in the fact that there is no general formulation of depletion forces in arbitrary dimensions and, typically, any approach that works well in three dimensions has to be reformulated for lower dimensionality. However, we have proposed a theoretical framework, based on the formalism of contraction of the description within the integral equations theory of simple liquids, to account for effective interactions in colloidal liquids, whose main feature is that it does not need to be readapted to the problem under consideration. We have also shown that such an approach allows one to determine the depletion pair potential in three-dimensional colloidal mixtures even near to the demixing transition, provided the bridge functions are sufficiently accurate to correctly describe the spatial correlation between colloids [E. López-Sánchez et al., J. Chem. Phys. 139, 104908 (2013)]. We here report an extensive analysis of the structure and the entropic potentials in binary mixtures of additive hard-disks. In particular, we show that the same functional form of the modified-Verlet closure relation used in three dimensions can be straightforwardly employed to obtain an accurate solution for two-dimensional colloidal mixtures in a wide range of packing fractions, molar fractions, and size asymmetries. Our theoretical results are explicitly compared with the ones obtained by means of event-driven molecular dynamics simulations and recent experimental results. Furthermore, to assess the accuracy of our predictions, the depletion potentials are used in an effective one-component model to reproduce

  20. Visualization of Structured Packing with Laser Induced Fluorescence Technique:Two-Dimensional Measurement of Liquid Concentration Distribution

    Institute of Scientific and Technical Information of China (English)

    刘伯潭; 申言同; 张会书; 刘春江; 唐忠利; 袁希钢

    2016-01-01

    A method of using laser induced fluorescence(LIF)technique was applied to two-dimensional meas-urement of the liquid concentration distribution in the 250Y structured packing sheet. The experimental structured packing sheet was made of perspex so that the laser could pass through it. The visualization of the distribution of the liquid concentration in the structured packing sheet was realized. The calibration of the thickness and liquid concentration was carried out firstly and the regression formulaI=kcd was acquired, in which concentrationc and the liquid film thicknessd were both considered. Then the liquid feed of uniform tracer(rhodamine)concentration entered the perspex structured packing from the top under different spraying densities. The corresponding thickness of liquid film on the packing was calculated. Finally, tracer(rhodamine)with a high concentration was injected only at one fixed point of the structured packing under different spraying densities of the liquid. With the known liquid film thickness, the concentration distribution of the tracer can be calculated inside the structured packing sheet.

  1. Plasmonic Structures for Sensing and Emitting Devices

    Science.gov (United States)

    Floris, Francesco; Fornasari, Lucia; Patrini, Maddalena; Figus, Cristiana; Mura, Andrea; Bongiovanni, Giovanni; Quochi, Francesco; Pellacani, Paola; Valsesia, Andrea; Marabelli, Franco

    2014-12-01

    We report on the study of a plasmonic nanostructure that could be adopted as platform for emitting and sensing applications. Several devices have been prepared and characterized by atomic force microscopy (AFM) and Fourier transform micro-reflectance (FT- pR) techniques. In addition, a modelling via finite-difference time-domain (FDTD) simulations have been developed in order to interpret the morphological shape and the optical response of the considered structures. Until now, remarkable performances as surface plasmon resonance (SPR) based optical sensor have been founded. Moreover, we are performing preliminary trials in order to establish a coupling between photoluminescence (PL) features of suitable emitters with respect to the plasmonic resonances.

  2. Two-dimensional deterministic photonic band gap structures based on the quasiperiodic sequences at millimeter wave frequencies

    Directory of Open Access Journals (Sweden)

    Y. Trabelsi

    2011-08-01

    Full Text Available Two-dimensional quasi-periodic band gap structures were investigated theoretically in microwave frequency range. Quasiperiodic photonic crystal based on the square range, arranged in a quasi-periodical fashion which follows Thue Morse or Fibonaci period substitutional sequences were obtained by the inflation rules emerging from the quasi-periodic sequence. The introduction of 2D quasi-periodicity distribution like Thue Morse or Fibonacci order and deterministic aperiodicity give some interesting microwave properties and offers amultitude of adjacent pseudo-band gap in different frequency range. The potential of photonic structures are explored by varying the structural parameters. The photonic band gap formation was explored as function of geometries of the structures such as pillar radius and parameters of quasi-periodical sequences. The electromagnetic field distribution can be described as a quasi-localized state varied by some defect carried by Thue Morse order. These structures provide interesting properties, which could be used to design novelmicrowave devices.

  3. Efficient Two-Dimensional Direction Finding via Auxiliary-Variable Manifold Separation Technique for Arbitrary Array Structure

    Directory of Open Access Journals (Sweden)

    Guang Hua

    2015-01-01

    Full Text Available A polynomial rooting direction of arrival (DOA algorithm for multiple plane waves incident on an arbitrary array structure that combines the multipolynomial resultants and matrix computations is proposed in this paper. Firstly, a new auxiliary-variable manifold separation technique (AV-MST is used to model the steering vector of arbitrary array structure as the product of a sampling matrix (dependent only on the array structure and two Vandermonde-structured wavefield coefficient vectors (dependent on the wavefield. Then the propagator operator is calculated and used to form a system of bivariate polynomial equations. Finally, the automatically paired azimuth and elevation estimates are derived by polynomial rooting. The presented algorithm employs the concept of auxiliary-variable manifold separation technique which requires no sector by sector array interpolation and thus does not suffer from any mapping errors. In addition, the new algorithm does not need any eigenvalue decomposition of the covariance matrix and exhausted search over the two-dimensional parameter space. Moreover, the algorithm gives automatically paired estimates, thus avoiding the complex pairing procedure. Therefore, the proposed algorithm shows low computational complexity and high robustness performance. Simulation results are shown to validate the effectiveness of the proposed method.

  4. Structural colors: from plasmonic to carbon nanostructures.

    Science.gov (United States)

    Xu, Ting; Shi, Haofei; Wu, Yi-Kuei; Kaplan, Alex F; Ok, Jong G; Guo, L Jay

    2011-11-18

    In addition to colorant-based pigmentation, structure is a major contributor to a material's color. In nature, structural color is often caused by the interaction of light with dielectric structures whose dimensions are on the order of visible-light wavelengths. Different optical interactions including multilayer interference, light scattering, the photonic crystal effect, and combinations thereof give rise to selective transmission or reflection of particular light wavelengths, which leads to the generation of structural color. Recent developments in nanofabrication of plasmonic and carbon nanostructures have opened another efficient way to control light properties at the subwavelength scale, including visible-light wavelength selection, which can produce structural color. In this Concept, the most relevant and representative achievements demonstrated over the last several years are presented and analyzed. These plasmonic and carbon nanostructures are believed to offer great potential for high-resolution color displays and spectral filtering applications.

  5. Real-space and plane-wave hybrid method for electronic structure calculations for two-dimensional materials

    Science.gov (United States)

    Do, V. Nam; Le, H. Anh; Vu, V. Thieu

    2017-04-01

    We propose a computational approach to combining the plane-wave method and the real-space treatment to describe the periodic variation in the material plane and the decay of wave functions from the material surfaces. The proposed approach is natural for two-dimensional material systems and thus may circumvent some intrinsic limitations involving the artificial replication of material layers in traditional supercell methods. In particular, we show that the proposed method is easy to implement and, especially, computationally effective since low-cost computational algorithms, such as iterative and recursive techniques, can be used to treat matrices with block tridiagonal structure. Using this approach we show first-principles features that supplement the current knowledge of some fundamental issues in bilayer graphene systems, including the coupling between the two graphene layers, the preservation of the σ band of monolayer graphene in the electronic structure of the bilayer system, and the differences in low-energy band structure between the AA- and AB-stacked configurations.

  6. Magnetic and Structural Studies on Two-Dimensional Antiferromagnets (MCl)LaNb2O7 (M = Mn, Co, Cr)

    Science.gov (United States)

    Kitada, Atsushi; Tsujimoto, Yoshihiro; Nishi, Masakazu; Matsuo, Akira; Kindo, Koichi; Ueda, Yutaka; Ajiro, Yoshitami; Kageyama, Hiroshi

    2016-03-01

    We report magnetic and structural studies on the two-dimensional antiferromagnets (MCl)LaNb2O7 (M = Mn, Cr, Co), prepared by topochemical reactions of a layered perovskite RbLaNb2O7. Electron diffraction of these oxyhalides revealed a superstructure with a √{2}a × √{2}a cell for M = Mn and Co, and a 2a × 2a cell for M = Cr, indicating that the MCl networks are distorted from an ideal square lattice. Neutron diffraction experiments showed that M = Mn and Co exhibit a (π 0 π ) antiferromagnetic order as observed for the S = 1/2 counterparts. (CoCl)LaNb2O7 with a strong spin anisotropy shows an antiferro to weak-ferromagnetic transition at low field, followed by novel two-step metamagnetic transitions likely associated with a 1/2 plateau for 27-54 T. Possible spin structures under magnetic field are discussed in terms of an Ising-type model. By contrast, (CrCl)LaNb2O7 exhibits a (π π π ) order, which is the first observation among related oxyhalides, and a spin-flop transition at 12 T due to a weak spin anisotropy. These results suggest that a slight difference in the MCl structure and spin anisotropy provides a crucial influence on the magnetic properties.

  7. Two-dimensional magnetotelluric model of deep resistivity structure in the Bodie-Aurora district of California

    Science.gov (United States)

    Sampson, Jay A.

    2006-01-01

    Introduction: Magnetotelluric data were acquired during October 2001 by the U.S. Geological Survey (USGS) as part of a study to examine the structural nature of basins in the transition zone between the Sierra Nevada Mountains of California and the Basin and Range province of Nevada. Magnetotelluric (MT) geophysical studies assist the mapping of geologic structure and the inference of lithologic packages that are concealed beneath the Earth's surface. The Basin and Range province has a complicated geologic history, which includes extension and compression of the Earth's crust to form the basins and ranges that blanket much of Nevada. The basins and ranges in the vicinity of this study trend northeastward and are bounded by steeply dipping strike slip faults. Interestingly, deep east-west magnetic trends occur in the aeromagnetic data of this study area indicating that the northeast-trending basins and ranges represent only thin-skinned deformation at the surface with an underlying east-west structure. To investigate this issue, MT data were acquired at seven stations in eastern California, 20 km east of Mono Lake. The purpose of this report is to present a two-dimensional apparent resistivity model of the MT data acquired for this study.

  8. Dual curved photonic crystal ring resonator based channel drop filter using two-dimensional photonic crystal structure

    Energy Technology Data Exchange (ETDEWEB)

    Chhipa, Mayur Kumar, E-mail: mayurchhipa1@gmail.com [Deptt. of Electronics and Communication Engineering, Government Engineering College Ajmer Rajasthan INDIA (India); Dusad, Lalit Kumar [Rajasthan Technical University Kota, Rajasthan (India)

    2016-05-06

    In this paper channel drop filter (CDF) is designed using dual curved photonic crystal ring resonator (PCRR). The photonic band gap (PBG) is calculated by plane wave expansion (PWE) method and the photonic crystal (PhC) based on two dimensional (2D) square lattice periodic arrays of silicon (Si) rods in air structure have been investigated using finite difference time domain (FDTD) method. The number of rods in Z and X directions is 21 and 20 respectively with lattice constant 0.540 nm and rod radius r = 0.1 µm. The channel drop filter has been optimized for telecommunication wavelengths λ = 1.591 µm with refractive indices 3.533. In the designed structure further analysis is also done by changing whole rods refractive index and it has been observed that this filter may be used for filtering several other channels also. The designed structure is useful for CWDM systems. This device may serve as a key component in photonic integrated circuits. The device is ultra compact with the overall size around 123 µm{sup 2}.

  9. Integral field optical spectroscopy of a representative sample of ULIRGs: II. Two-dimensional kpc-scale extinction structure

    CERN Document Server

    García-Marín, M; Arribas, S

    2009-01-01

    We investigate the two-dimensional kpc-scale structure of the extinction in a representative sample of local ULIRGs using the Halpha/Hbeta line ratio.We use optical integral field spectroscopy obtained with the INTEGRAL instrument at the William Herschel Telescope. Complementary optical and near-IR high angular resolution HST images have also been used. The extinction exhibits a very complex and patchy structure in ULIRGs on kpc scales, from basically transparent regions to others deeply embedded in dust (Av~0.0 to Av~8.0 mag). Nuclear extinction covers a broad range in Av from 0.6 to 6 mag, 69% of the nuclei having Av>2.0 mag. Extinction in the external regions is substantially lower than in the nuclei with 64% of the ULIRGs in the sample having median Av of less than 2 mag for the entire galaxy. While post-coalescence nuclei tend to cluster around Av values of 2 to 3 mag, pre-coalescence nuclei appear more homogeneously distributed over the entire 0.4 mag

  10. Plasmonic Structural Colors for Plastic Consumer Products

    DEFF Research Database (Denmark)

    Højlund-Nielsen, Emil; Mortensen, N. Asger; Kristensen, Anders

    2014-01-01

    Today colorants, such as pigments or dyes, are used to color plastic-based consumer products, either as base for solid colored bulk polymer or in inks for surface decoration. After usage, the products must be mechanically sorted by color before recycling, limiting any large-scale efficient...... recycling effort. As an alternative to chemistry-based coloring, nano-scale structural coloring has been proposed to reduce the number of materials needed and to increase pattern resolution. Here colors are created by structural based light-matter interactions in the surface. Thereby, the sorting by color...... can be avoided in the recycling state. Plasmon color technology based on aluminum has recently been firmly established as a route towards structural coloring of polymeric materials. We report on the fabrication of colors by localized surface plasmon resonances (LSPR) using roll-to-roll printing...

  11. Two-dimensional infrared spectroscopic study on the thermally induced structural changes of glutaraldehyde-crosslinked collagen.

    Science.gov (United States)

    Tian, Zhenhua; Wu, Kun; Liu, Wentao; Shen, Lirui; Li, Guoying

    2015-04-05

    The thermal stability of collagen solution (5 mg/mL) crosslinked by glutaraldehyde (GTA) [GTA/collagen (w/w)=0.5] was measured by differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR), and the thermally induced structural changes were analyzed using two-dimensional (2D) correlation spectra. The denaturation temperature (Td) and enthalpy change (ΔH) of crosslinked collagen were respectively about 27°C and 88 J/g higher than those of native collagen, illuminating the thermal stability increased. With the increase of temperature, the red-shift of absorption bands and the decreased AIII/A1455 value obtained from FTIR spectra indicated that hydrogen bonds were weakened and the unwinding of triple helix occurred for both native and crosslinked collagens; whereas the less changes in red-shifting and AIII/A1455 values for crosslinked collagen also confirmed the increase in thermal stability. Additionally, the 2D correlation analysis provided information about the thermally induced structural changes. In the 2D synchronous spectra, the intensities of auto-peaks at 1655 and 1555 cm(-1), respectively assigned to amide I band (CO stretching vibration) and amide II band (combination of NH bending and CN stretching vibrations) in helical conformation were weaker for crosslinked collagen than those for native collagen, indicating that the helical structure of crosslinked collagen was less sensitive to temperature. Moreover, the sequence of the band intensity variations showed that the band at 1555 cm(-1) moved backwards owing to the addition of GTA, demonstrating that the response of helical structure of crosslinked collagen to the increased temperature lagged. It was speculated that the stabilization of collagen by GTA was due to the reinforcement of triple helical structure.

  12. Surface plasmon polariton amplification in metal-semiconductor structures.

    Science.gov (United States)

    Fedyanin, Dmitry Yu; Arsenin, Aleksey V

    2011-06-20

    We propose a novel scheme of surface plasmon polariton (SPP) amplification that is based on a minority carrier injection in a Schottky diode. This scheme uses compact electrical pumping instead of bulky optical pumping. Compact size and a planar structure of the proposed amplifier allow one to utilize it in integrated plasmonic circuits and couple it easily to passive plasmonic devices. Moreover, this technique can be used to obtain surface plasmon lasing.

  13. Two-dimensional wide-band-gap II-V semiconductors with a dilated graphene-like structure

    Science.gov (United States)

    Zhang, Xue-Jing; Liu, Bang-Gui

    2016-12-01

    Since the advent of graphene, two-dimensional (2D) materials have become very attractive and there is growing interest in exploring new 2D materials beyond graphene. Here, through density-functional theory (DFT) calculations, we predict 2D wide-band-gap II-V semiconductor materials of M3X2 (M = Zn, Cd and X = N, P, As) with a dilated graphene-like honeycomb structure. In this structure the group-V X atoms form two X-atomic planes symmetrically astride the centering group-IIB M atomic plane. Our DFT calculation shows that 2D Zn3N2, Zn3P2 and Zn3As2 have direct band gaps of 2.87, 3.81 and 3.55 eV, respectively, and 2D Cd3N2, Cd3P2 and Cd3As2 exhibit indirect band gaps of 2.74, 3.51 and 3.29 eV, respectively. Each of the six 2D materials is shown to have effective carrier (either hole or electron) masses down to 0.03m 0-0.05m 0. The structural stability and feasibility of experimental realization of these 2D materials has been shown in terms of DFT phonon spectra and total energy comparison with related existing bulk materials. On the experimental side, there already are many similar two-coordinate structures of Zn and other transition metals in various organic materials. Therefore, these 2D semiconductors can enrich the family of 2D electronic materials and may have promising potential for achieving novel transistors and optoelectronic devices.

  14. Global Structure of Three Distinct Accretion Flows and Outflows around Black Holes through Two-Dimensional Radiation-Magnetohydrodynamic Simulations

    CERN Document Server

    Ohsuga, Ken

    2011-01-01

    We present the detailed global structure of black hole accretion flows and outflows through newly performed two-dimensional radiation-magnetohydrodynamic simulations. By starting from a torus threaded with weak toroidal magnetic fields and by controlling the central density of the initial torus, rho_0, we can reproduce three distinct modes of accretion flow. In model A with the highest central density, an optically and geometrically thick supercritical accretion disk is created. The radiation force greatly exceeds the gravity above the disk surface, thereby driving a strong outflow (or jet). Because of the mild beaming, the apparent (isotropic) photon luminosity is ~22L_E (where L_E is the Eddington luminosity) in the face-on view. Even higher apparent luminosity is feasible if we increase the flow density. In model B with a moderate density, radiative cooling of the accretion flow is so efficient that a standard-type, cold, and geometrically thin disk is formed at radii greater than ~7R_S (where R_S is the S...

  15. Impact of Radii Ratios on a Two-Dimensional Cloaking Structure and Corresponding Analysis for Practical Design at Optical Wavelengths

    Directory of Open Access Journals (Sweden)

    Nadia Anam

    2017-01-01

    Full Text Available This work is an extension to the evaluation and analysis of a two-dimensional cylindrical cloak in the Terahertz or visible range spectrum using Finite Difference Time-Domain (FDTD method. It was concluded that it is possible to expand the frequency range of a cylindrical cloaking model by careful scaling of the inner and outer radius of the simulation geometry with respect to cell size and/or number of time steps in the simulation grid while maintaining appropriate stability conditions. Analysis in this study is based on a change in the radii ratio, that is, outer radius to inner radius, of the cloaking structure for an array of wavelengths in the visible spectrum. Corresponding outputs show inconsistency in the cloaking pattern with respect to frequency. The inconsistency is further increased as the radii ratio is decreased. The results also help to establish a linear relationship between the transmission coefficient and the real component of refractive index with respect to different radii ratios which may simplify the selection of the material for practical design purposes. Additional performance analysis is carried out such that the dimensions of the cloak are held constant at an average value and the frequency varied to determine how a cloaked object may be perceived by the human eye which considers different wavelengths to be superimposed on each other simultaneously.

  16. Two-dimensional MoS2 under ion irradiation: from controlled defect production to electronic structure engineering

    Science.gov (United States)

    Ghorbani-Asl, Mahdi; Kretschmer, Silvan; Spearot, Douglas E.; Krasheninnikov, Arkady V.

    2017-06-01

    Two-dimensional (2D) transition metal dichalcogenides (TMDs), like MoS2, have unique electronic and optical properties, which can further be tuned using ion bombardment and post-synthesis ion-beam mediated methods combined with exposure of the irradiated sample to precursor gases. The optimization of these techniques requires a complete understanding of the response of 2D TMDs to ion irradiation, which is affected by the reduced dimensionality of the system. By combining analytical potential molecular dynamics with first-principles calculations, we study the production of defects in free-standing MoS2 sheets under noble gas ion irradiation for a wide range of ion energies when nuclear stopping dominates, and assess the probabilities for different defects to appear. We show that depending on the incident angle, ion type and energy, sulfur atoms can be sputtered away predominantly from the top or bottom layers, creating unique opportunities for engineering mixed MoSX compounds where X are chemical elements from group V or VII. We study the electronic structure of such systems, demonstrate that they can be metals, and finally discuss how metal/semiconductor/metal junctions, which exhibit negative differential resistance, can be designed using focused ion beams combined with the exposure of the system to fluorine.

  17. Defining RNA motif-aminoglycoside interactions via two-dimensional combinatorial screening and structure-activity relationships through sequencing.

    Science.gov (United States)

    Velagapudi, Sai Pradeep; Disney, Matthew D

    2013-10-15

    RNA is an extremely important target for the development of chemical probes of function or small molecule therapeutics. Aminoglycosides are the most well studied class of small molecules to target RNA. However, the RNA motifs outside of the bacterial rRNA A-site that are likely to be bound by these compounds in biological systems is largely unknown. If such information were known, it could allow for aminoglycosides to be exploited to target other RNAs and, in addition, could provide invaluable insights into potential bystander targets of these clinically used drugs. We utilized two-dimensional combinatorial screening (2DCS), a library-versus-library screening approach, to select the motifs displayed in a 3×3 nucleotide internal loop library and in a 6-nucleotide hairpin library that bind with high affinity and selectivity to six aminoglycoside derivatives. The selected RNA motifs were then analyzed using structure-activity relationships through sequencing (StARTS), a statistical approach that defines the privileged RNA motif space that binds a small molecule. StARTS allowed for the facile annotation of the selected RNA motif-aminoglycoside interactions in terms of affinity and selectivity. The interactions selected by 2DCS generally have nanomolar affinities, which is higher affinity than the binding of aminoglycosides to a mimic of their therapeutic target, the bacterial rRNA A-site.

  18. Magnetic breakdown phenomenon in quasi-two-dimensional organic conductors: A quantum model inspired by a realistic band structure

    Science.gov (United States)

    Kim, Ju H.; Han, S. Y.; Brooks, J. S.

    1999-08-01

    We investigate the phenomenon of magnetic breakdown in quasi-two-dimensional organic conductors such as α-(ET)2KHg(SCN)4 and κ-(ET)2Cu(NCS)2 by constructing a tight-binding model based on a realistic band structure which is derived from the crystallographic data. We solve the model numerically to compute the magnetic field dependence of the magnetization and show that the present model accounts naturally for the experimentally observed magnetization oscillation frequencies that are forbidden in the semiclassical picture. The computed values of the fundamental and magnetic breakdown frequencies with no adjustable parameters are close to the experimentally measured values. For completeness, we carry out the computation for both canonical (fixed number of particles) and grand canonical (fixed chemical potential) ensembles, and show that the forbidden frequencies appear in both cases. Hence, the appearance of anomalous frequencies in the de Haas-van Alphen effect has a quantum-mechanical origin and arises from the interplay of electronic states from two partially occupied bands near the Fermi energy as a function of magnetic field. We also compute the temperature dependence of the magnetization and apply ad hoc the Lifshitz-Kosevich analysis to the amplitudes of the Fourier components at moderately high temperatures. This yields effective mass values for α-(ET)2KHg(SCN)4 in good agreement with experimental values.

  19. Development and optimization of scanning spreading resistance microscopy for measuring the two-dimensional carrier profile in solar cell structures

    Energy Technology Data Exchange (ETDEWEB)

    Eyben, Pierre; Hantschel, Thomas; Lorenz, Anne; Gestel, Dries van; John, Joachim [IMEC, Kapeldreef 75, 3001 Leuven (Belgium); Seidel, Felix [IMEC, Kapeldreef 75, 3001 Leuven (Belgium); TU Bergakademie Freiberg, Institut fuer Elektronik- und Sensormaterialien, Gustav-Zeuner-Str. 3, 09599 Freiberg (Germany); Schulze, Andreas; Vandervorst, Wilfried [IMEC, Kapeldreef 75, 3001 Leuven (Belgium); Instituut voor Kern- en Stralingsfysika, K.U. Leuven, Celestijnenlaan 200D, 3001 Leuven (Belgium); Castro, Angel Uruena de [IMEC, Kapeldreef 75, 3001 Leuven (Belgium); Department of Electrical Engineering (ESAT), Katholieke Universiteit Leuven, Oude Markt, 13, Bus 5005, 3000 Leuven (Belgium); Horzel, Joerg [SCHOTT Solar AG, Carl-Zeiss-Strasse 4, 63755 Alzenau (Germany)

    2011-03-15

    Within this work, we have explored the use of scanning spreading resistance microscopy (SSRM) on advanced solar cell structures. Three main topics, corresponding to three important needs, were targeted. First, we have analyzed the highly doped regions at the frontside of solar cells. The influence of the surface roughness, hindering the use of other techniques (e.g., secondary ion mass spectrometry, SIMS), and the phosphorus diffusion along grains for multicrystalline silicon (mc-Si) have been studied quantitatively as they may affect substantially the electrical properties of solar cells. Secondly, we have explored local backside contacts manufactured using new techniques like laser ablation followed by dopant diffusion. Having a better knowledge of the two-dimensional (2D)-dopant distribution is a subject of growing interest. Finally, we have studied electrical properties of grain-boundary and intragrain defects in polycrystalline silicon (pc-Si) layers as they may play a major role in the electrical performances of the solar cells. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Hierarchical on-surface synthesis and electronic structure of carbonyl-functionalized one- and two-dimensional covalent nanoarchitectures

    Science.gov (United States)

    Steiner, Christian; Gebhardt, Julian; Ammon, Maximilian; Yang, Zechao; Heidenreich, Alexander; Hammer, Natalie; Görling, Andreas; Kivala, Milan; Maier, Sabine

    2017-03-01

    The fabrication of nanostructures in a bottom-up approach from specific molecular precursors offers the opportunity to create tailored materials for applications in nanoelectronics. However, the formation of defect-free two-dimensional (2D) covalent networks remains a challenge, which makes it difficult to unveil their electronic structure. Here we report on the hierarchical on-surface synthesis of nearly defect-free 2D covalent architectures with carbonyl-functionalized pores on Au(111), which is investigated by low-temperature scanning tunnelling microscopy in combination with density functional theory calculations. The carbonyl-bridged triphenylamine precursors form six-membered macrocycles and one-dimensional (1D) chains as intermediates in an Ullmann-type coupling reaction that are subsequently interlinked to 2D networks. The electronic band gap is narrowed when going from the monomer to 1D and 2D surface-confined π-conjugated organic polymers comprising the same building block. The significant drop of the electronic gap from the monomer to the polymer confirms an efficient conjugation along the triphenylamine units within the nanostructures.

  1. Lennard-Jones fluids in two-dimensional nano-pores. Multi-phase coexistence and fluid structure

    Science.gov (United States)

    Yatsyshin, Petr; Savva, Nikos; Kalliadasis, Serafim

    2014-03-01

    We present a number of fundamental findings on the wetting behaviour of nano-pores. A popular model for fluid confinement is a one-dimensional (1D) slit pore formed by two parallel planar walls and it exhibits capillary condensation (CC): a first-order phase transition from vapour to capillary-liquid (Kelvin shift). Capping such a pore at one end by a third orthogonal wall forms a prototypical two-dimensional (2D) pore. We show that 2D pores possess a wetting temperature such that below this temperature CC remains of first order, above it becomes a continuous phase transition manifested by a slab of capillary-liquid filling the pore from the capping wall. Continuous CC exhibits hysteresis and can be preceded by a first-order capillary prewetting transition. Additionally, liquid drops can form in the corners of the 2D pore (remnant of 2D wedge prewetting). The three fluid phases, vapour, capillary-liquid slab and corner drops, can coexist at the pore triple point. Our model is based on the statistical mechanics of fluids in the density functional formulation. The fluid-fluid and fluid-substrate interactions are dispersive. We analyze in detail the microscopic fluid structure, isotherms and full phase diagrams. Our findings also suggest novel ways to control wetting of nano-pores. We are grateful to the European Research Council via Advanced Grant No. 247031 for support.

  2. Estimates of the statistical two-dimensional spatial structure in rain over a small network of disdrometers

    Science.gov (United States)

    Jameson, A. R.; Larsen, M. L.

    2016-06-01

    Microphysical understanding of the variability in rain requires a statistical characterization of different drop sizes both in time and in all dimensions of space. Temporally, there have been several statistical characterizations of raindrop counts. However, temporal and spatial structures are neither equivalent nor readily translatable. While there are recent reports of the one-dimensional spatial correlation functions in rain, they can only be assumed to represent the two-dimensional (2D) correlation function under the assumption of spatial isotropy. To date, however, there are no actual observations of the (2D) spatial correlation function in rain over areas. Two reasons for this deficiency are the fiscal and the physical impossibilities of assembling a dense network of instruments over even hundreds of meters much less over kilometers. Consequently, all measurements over areas will necessarily be sparsely sampled. A dense network of data must then be estimated using interpolations from the available observations. In this work, a network of 19 optical disdrometers over a 100 m by 71 m area yield observations of drop spectra every minute. These are then interpolated to a 1 m resolution grid. Fourier techniques then yield estimates of the 2D spatial correlation functions. Preliminary examples using this technique found that steadier, light rain decorrelates spatially faster than does the convective rain, but in both cases the 2D spatial correlation functions are anisotropic, reflecting an asymmetry in the physical processes influencing the rain reaching the ground not accounted for in numerical microphysical models.

  3. Aluminum-based one- and two-dimensional micro fin array structures: high-throughput fabrication and heat transfer testing

    Science.gov (United States)

    Primeaux, Philip A.; Zhang, Bin; Zhang, Xiaoman; Miller, Jacob; Meng, W. J.; KC, Pratik; Moore, Arden L.

    2017-02-01

    Microscale fin array structures were replicated onto surfaces of aluminum 1100 and aluminum 6061 alloy (Al1100/Al6061) sheet metals through room-temperature instrumented roll molding. Aluminum-based micro fin arrays were replicated at room temperature, and the fabrication process is one with high throughput and low cost. One-dimensional (1D) micro fin arrays were made through one-pass rolling, while two-dimensional (2D) micro fin arrays were made by sequential 90° cross rolling with the same roller sleeve. For roll molding of 1D micro fins, fin heights greater than 600 µm were achieved and were shown to be proportional to the normal load force per feature width. At a given normal load force, the fin height was further shown to scale inversely with the hardness of the sheet metal. For sequential 90° cross rolling, morphologies of roll molded 2D micro fin arrays were examined, which provided clues to understand how plastic deformation occurred under cross rolling conditions. A series of pool boiling experiments on low profile Al micro fin array structures were performed within Novec 7100, a widely used commercial dielectric coolant. Results for both horizontal and vertical surface orientations show that roll molded Al micro fin arrays can increase heat flux at fixed surface temperature as compared to un-patterned Al sheet. The present results further suggest that many factors beyond just increased surface area can influence heat transfer performance, including surface finish and the important multiphase transport mechanisms in and around the fin geometry. These factors must also be considered when designing and optimizing micro fin array structures for heat transfer applications.

  4. Two-dimensional function photonic crystals

    CERN Document Server

    Wu, Xiang-Yao; Liu, Xiao-Jing; Liang, Yu

    2016-01-01

    In this paper, we have firstly proposed two-dimensional function photonic crystals, which the dielectric constants of medium columns are the functions of space coordinates $\\vec{r}$, it is different from the two-dimensional conventional photonic crystals constituting by the medium columns of dielectric constants are constants. We find the band gaps of two-dimensional function photonic crystals are different from the two-dimensional conventional photonic crystals, and when the functions form of dielectric constants are different, the band gaps structure should be changed, which can be designed into the appropriate band gaps structures by the two-dimensional function photonic crystals.

  5. Turbulent pair separation due to multi scale stagnation point structure and its time asymmetry in two-dimensional turbulence

    OpenAIRE

    Faber, Tristan; Vassilicos, J. C.

    2008-01-01

    The pair separation model of Goto and Vassilicos (S Goto and J C Vassilicos, 2004, New J.Phys., 6, p.65) is revisited and placed on a sound mathematical foundation. A DNS of two dimensional homogeneous isotropic turbulence with an inverse energy cascade and a k^{-5/3} power law is used to investigate properties of pair separation in two dimensional turbulence. A special focus lies on the time asymmetry observed between forward and backward separation. Application of the present model to this ...

  6. Assessing two-dimensional crystallization trials of small membrane proteins for structural biology studies by electron crystallography.

    Science.gov (United States)

    Johnson, Matthew C; Rudolph, Frederik; Dreaden, Tina M; Zhao, Gengxiang; Barry, Bridgette A; Schmidt-Krey, Ingeborg

    2010-10-29

    Electron crystallography has evolved as a method that can be used either alternatively or in combination with three-dimensional crystallization and X-ray crystallography to study structure-function questions of membrane proteins, as well as soluble proteins. Screening for two-dimensional (2D) crystals by transmission electron microscopy (EM) is the critical step in finding, optimizing, and selecting samples for high-resolution data collection by cryo-EM. Here we describe the fundamental steps in identifying both large and ordered, as well as small 2D arrays, that can potentially supply critical information for optimization of crystallization conditions. By working with different magnifications at the EM, data on a range of critical parameters is obtained. Lower magnification supplies valuable data on the morphology and membrane size. At higher magnifications, possible order and 2D crystal dimensions are determined. In this context, it is described how CCD cameras and online-Fourier Transforms are used at higher magnifications to assess proteoliposomes for order and size. While 2D crystals of membrane proteins are most commonly grown by reconstitution by dialysis, the screening technique is equally applicable for crystals produced with the help of monolayers, native 2D crystals, and ordered arrays of soluble proteins. In addition, the methods described here are applicable to the screening for 2D crystals of even smaller as well as larger membrane proteins, where smaller proteins require the same amount of care in identification as our examples and the lattice of larger proteins might be more easily identifiable at earlier stages of the screening.

  7. On the large-scale structure and spectral dynamics of two-dimensional turbulence in a periodic channel

    NARCIS (Netherlands)

    Kramer, W.; Clercx, H.J.H.; van Heijst, G.J.F.

    2008-01-01

    This paper reports on a numerical study of forced two-dimensional turbulence in a periodic channel with flat no-slip walls. Since corners or curved domain boundaries, which are met in the standard rectangular, square, or circular geometries, are absent in this geometry, the (statistical) analysis of

  8. Structured light for focusing surface plasmon polaritons.

    Science.gov (United States)

    Hu, Z J; Tan, P S; Zhu, S W; Yuan, X-C

    2010-05-10

    We propose a structureless method for focusing surface plasmon polaritons (SPPs) on a flat metal film under illumination of radially polarized cogwheel-like structured light beams. Without metal structures, the locally induced SPPs can further be propagated following the predefined patterns to form symmetric focal spots with dimensions beyond diffraction limit. Benefiting from the radial polarization, this method can be employed to pattern various center-symmetric evanescent distributions for generating SPPs reconfigurably. The SPPs will be propagating and focusing in radial directions.

  9. Temperature Imaging around Plasmonic Structures

    OpenAIRE

    Donner, Jon Sean

    2010-01-01

    Tesina realitzada en col.laboració amb IFCO i Cellex In the course of this work a novel microscope was constructed that is able to obtain a temperature map on the micro and nanoscale. The principle is demonstrated by presenting thermal maps of heated gold micro and nano structures. The temperature measurement is based on a uorescence polarization anisotropy measurement, and can produce a thermal image at a fast frame rate, which allows to obtain a thermal video. Being an...

  10. Long Range Surface Plasmons in Multilayer Structures

    CERN Document Server

    Delfan, Aida

    2013-01-01

    We present a new strategy, based on a Fresnel coefficient pole analysis, for designing an asymmetric multilayer structure that supports long range surface plasmons (LRSP). We find that the electric field intensity in the metal layer of a multilayer LRSP structure can be even slightly smaller than in the metal layer of the corresponding symmetric LRSP structure, minimizing absorption losses and resulting in LRSP propagation lengths up to 2mm. With a view towards biosensing applications, we also present semi-analytic expressions for a standard surface sensing parameter in arbitrary planar resonant structures, and in particular show that for an asymmetric structure consisting of a gold film deposited on a multilayer of SiO2 and TiO2 a surface sensing parameter G = 1.28(1/nm) can be achieved.

  11. Structure of two-dimensional and three-dimensional turbulent boundary layers with sparsely distributed roughness elements

    Science.gov (United States)

    George, Jacob

    The present study deals with the effects of sparsely distributed three-dimensional elements on two-dimensional (2-D) and three-dimensional (3-D) turbulent boundary layers (TBL) such as those that occur on submarines, ship hulls, etc. This study was achieved in three parts: Part 1 dealt with the cylinders when placed individually in the turbulent boundary layers, thereby considering the effect of a single perturbation on the TBL; Part 2 considered the effects when the same individual elements were placed in a sparse and regular distribution, thus studying the response of the flow to a sequence of perturbations; and in Part 3, the distributions were subjected to 3-D turbulent boundary layers, thus examining the effects of streamwise and spanwise pressure gradients on the same perturbed flows as considered in Part 2. The 3-D turbulent boundary layers were generated by an idealized wing-body junction flow. Detailed 3-velocity-component Laser-Doppler Velocimetry (LDV) and other measurements were carried out to understand and describe the rough-wall flow structure. The measurements include mean velocities, turbulence quantities (Reynolds stresses and triple products), skin friction, surface pressure and oil flow visualizations in 2-D and 3-D rough-wall flows for Reynolds numbers, based on momentum thickness, greater than 7000. Very uniform circular cylindrical roughness elements of 0.38mm, 0.76mm and 1.52mm height (k) were used in square and diagonal patterns, yielding six different roughness geometries of rough-wall surface. For the 2-D rough-wall flows, the roughness Reynolds numbers, k +, based on the element height (k) and the friction velocity (Utau), range from 26 to 131. Results for the 2-D rough-wall flows reveal that the velocity-defect law is similar for both smooth and rough surfaces, and the semi-logarithmic velocity-distribution curve is shifted by an amount DeltaU/U, depending on the height of the roughness element, showing that Delta U/Utau is a function

  12. Coupling of Quantum Emitters in Nanodiamonds to Plasmonic Structures

    DEFF Research Database (Denmark)

    Kumar, Shailesh

    applications such as sensing of the magnetic field. In this work, NV-centers in nanodiamond crystals smaller than 100 nm were used. For enhancing and channeling emission from the NV-centers, metallic waveguides are used in this work. In such waveguides, electromagnetic waves are guided at the interface between...... structure used for the coupling is two nanowires placed in parallel, which supports plasmonic modes in the gap between nanowires. The distribution of electromagnetic field in the plasmonic mode depends on the structure of the waveguide. The coupling between an emitter and the plasmonic mode, in turn...... a plasmonic waveguide and a dielectric waveguide made of silicon nitride suggest that the two waveguides can be coupled with a coupling loss of around 30 percent. Evanescent coupling between two plasmonic waveguides is also studied which can be useful for all integrated quantum plasmonic circuits....

  13. Controlling noise in plasmonic structures with gain

    Science.gov (United States)

    Vyshnevyy, A. A.; Fedyanin, D. Yu.

    2017-09-01

    Loss compensation by gain medium gives the possibility to exploit subwavelength confinement of light in plasmonic nanostructures and construct nanoscale plasmonic circuits. However, due to fundamentally unavoidable spontaneous emission from the gain medium, lossless waveguides suffer from strong photonic noise, which limits their practical applications. Here we demonstrate the possibility of significant decrease of the noise level while preserving physical dimensions of lossless plasmonic waveguides with gain. Our findings are aimed at extending the communication capabilities of on-chip plasmonic networks.

  14. Investigation of the Band Structure of Graphene-Based Plasmonic Photonic Crystals

    Directory of Open Access Journals (Sweden)

    Pingping Qiu

    2016-09-01

    Full Text Available In this paper, one-dimensional (1D and two-dimensional (2D graphene-based plasmonic photonic crystals (PhCs are proposed. The band structures and density of states (DOS have been numerically investigated. Photonic band gaps (PBGs are found in both 1D and 2D PhCs. Meanwhile, graphene-based plasmonic PhC nanocavity with resonant frequency around 175 THz, is realized by introducing point defect, where the chemical potential is from 0.085 to 0.25 eV, in a 2D PhC. Also, the bending wvaguide and the beam splitter are realized by introducing the line defect into the 2D PhC.

  15. Investigation of the Band Structure of Graphene-Based Plasmonic Photonic Crystals

    Science.gov (United States)

    Qiu, Pingping; Qiu, Weibin; Lin, Zhili; Chen, Houbo; Tang, Yixin; Wang, Jia-Xian; Kan, Qiang; Pan, Jiao-Qing

    2016-01-01

    In this paper, one-dimensional (1D) and two-dimensional (2D) graphene-based plasmonic photonic crystals (PhCs) are proposed. The band structures and density of states (DOS) have been numerically investigated. Photonic band gaps (PBGs) are found in both 1D and 2D PhCs. Meanwhile, graphene-based plasmonic PhC nanocavity with resonant frequency around 175 THz, is realized by introducing point defect, where the chemical potential is from 0.085 to 0.25 eV, in a 2D PhC. Also, the bending wvaguide and the beam splitter are realized by introducing the line defect into the 2D PhC.

  16. Two-dimensional NMR spectroscopy links structural moieties of soil organic matter to the temperature sensitivity of its decomposition

    Science.gov (United States)

    Soucemarianadin, Laure; Erhagen, Björn; Öquist, Mats; Nilsson, Mats; Schleucher, Jürgen

    2015-04-01

    Soil organic matter (SOM) represents a huge carbon pool, specifically in boreal ecosystems. Warming-induced release of large amounts of CO2 from the soil carbon pool might become a significant exacerbating feedback to global warming, if decomposition rates of boreal soils were more sensitive to increased temperatures. Despite a large number of studies dedicated to the topic, it has proven difficult to elucidate how the organo-chemical composition of SOM influences its decomposition, or its quality as a substrate for microbial metabolism. A great part of this challenge results from our inability to achieve a detailed characterization of the complex composition of SOM on the level of molecular structural moieties. 13C nuclear magnetic resonance (NMR) spectroscopy is a common tool to characterize SOM. However, SOM is a very complex mixture and the chemical shift regions distinguished in the 13C NMR spectra often represent many different molecular fragments. For example, in the carbohydrates region, signals of all monosaccharides present in many different polymers overlap. This overlap thwarts attempts to identify molecular moieties, resulting in insufficient information to characterize SOM composition. We applied two-dimensional (2D) NMR to characterize SOM with highly increased resolution. We directly dissolved finely ground litters and forest floors'fibric and humic horizons'of both coniferous and deciduous boreal forests in dimethyl sulfoxide and analyzed the resulting solution with a 2D 1H-13C NMR experiment. In the 2D planes of these spectra, signals of CH groups can be resolved based on their 13C and 1H chemical shifts, hence the resolving power and information content of these NMR spectra is hugely increased. The 2D spectra indeed resolved overlaps observed in 1D 13C spectra, so that hundreds of distinct CH groups could be observed and many molecular fragments could be identified. For instance, in the aromatics region, signals from individual lignin units could

  17. Plasmonic-Electronic Transduction

    Science.gov (United States)

    2012-01-31

    resonances in two dimensional electron gases. Tunable plasmon absorption resonances were observed and studied in InP-based and GaN -based HEMTs . The...Resonant terahertz absorption by plasmons in grating-gate GaN HEMT structures,” A. V. Muravjov, D. B. Veksler, X. Hu, R. Gaska, N. Pala, H. Saxena...Nov. 2009, Singapore. 4. “Terahertz Plasmons in Grating-Gate AlGaN/ GaN HEMTs ,” A.V. Muravjov, D.B. Veksler, V.V. Popov, M.S. Shur, N. Pala, X. Hu, R

  18. Terahertz Plasmonic Structure With Enhanced Sensing Capabilities

    DEFF Research Database (Denmark)

    Yahiaoui, Riad; Strikwerda, Andrew C.; Jepsen, Peter Uhd

    2016-01-01

    We have designed, fabricated, and experimentally verified a highly sensitive plasmonic sensing device in the terahertz frequency range. For a proof of concept of the sensing phenomenon, we have chosen the so-called fishnet structure based on circular hole array insensitive to the polarization...... of the incident wave. We employ the localized resonance associated with the cutoff frequency (electric plasma frequency) of the hole array to investigate its sensing capability. A thin-film overlayer deposited on the surface of the metallic apertures causes an amplitude modulation and a shift in the resonant...... frequency of the terahertz transmission. The frequency shift and the amplitude modulation were investigated as a function of the refractive index and the thickness of the overlayer for determining the sensing potential of the proposed structure. Measurements carried out using terahertz time...

  19. Topological defects in two-dimensional crystals

    OpenAIRE

    Chen, Yong; Qi, Wei-Kai

    2008-01-01

    By using topological current theory, we study the inner topological structure of the topological defects in two-dimensional (2D) crystal. We find that there are two elementary point defects topological current in two-dimensional crystal, one for dislocations and the other for disclinations. The topological quantization and evolution of topological defects in two-dimensional crystals are discussed. Finally, We compare our theory with Brownian-dynamics simulations in 2D Yukawa systems.

  20. Time-domain analysis of bandgap characteristics of two-dimensional periodic structures by use of a source-model technique.

    Science.gov (United States)

    Ludwig, Alon; Leviatan, Yehuda

    2008-02-01

    We introduce a time-domain source-model technique for analysis of two-dimensional, transverse-magnetic, plane-wave scattering by a photonic crystal slab composed of a finite number of identical layers, each comprising a linear periodic array of dielectric cylinders. The proposed technique takes advantage of the periodicity of the slab by solving the problem within a unit cell of the periodic structure. A spectral analysis of the temporal behavior of the fields scattered by the slab shows a clear agreement between frequency bands where the spectral density of the transmitted energy is low and the bandgaps of the corresponding two-dimensionally infinite periodic structure. The effect of the bandwidth of the incident pulse and its center frequency on the manner it is transmitted through and reflected by the slab is studied via numerical examples.

  1. A numerical method for three-dimensional vortical structure of spiral vortex in wind turbine with two-dimensional velocity data at plural azimuthal angles

    Science.gov (United States)

    Nakayama, Katsuyuki; Mizushima, Lucas Dias; Murata, Junsuke; Maeda, Takao

    2016-06-01

    A numerical method is presented to extract three-dimensional vortical structure of a spiral vortex (wing tip vortex) in a wind turbine, from two-dimensional velocity data at several azimuthal angles. This numerical method contributes to analyze a vortex observed in experiment where three-dimensional velocity field is difficult to be measured. This analysis needs two-dimensional velocity data in parallel planes at different azimuthal angles of a rotating blade, which facilitates the experiment since the angle of the plane does not change. The vortical structure is specified in terms of the invariant flow topology derived from eigenvalues and eigenvectors of three-dimensional velocity gradient tensor and corresponding physical properties. In addition, this analysis enables to investigate not only vortical flow topology but also important vortical features such as pressure minimum and vortex stretching that are derived from the three-dimensional velocity gradient tensor.

  2. Surface Plasmon Coupling and Control Using Spherical Cap Structures

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Yu; Joly, Alan G.; Zhang, Xin; El-Khoury, Patrick Z.; Hess, Wayne P.

    2017-06-05

    Propagating surface plasmons (PSPs) launched from a protruded silver spherical cap structure are investigated using photoemission electron microscopy (PEEM) and finite difference time domain (FDTD) calculations. Our combined experimental and theoretical findings reveal that PSP coupling efficiency is comparable to conventional etched-in plasmonic coupling structures. Additionally, plasmon propagation direction can be varied by a linear rotation of the driving laser polarization. A simple geometric model is proposed in which the plasmon direction selectivity is proportional to the projection of the linear laser polarization on the surface normal. An application for the spherical cap coupler as a gate device is proposed. Overall, our results indicate that protruded cap structures hold great promise as elements in emerging surface plasmon applications.

  3. Aerosol assisted fabrication of two dimensional ZnO island arrays and honeycomb patterns with identical lattice structures

    Directory of Open Access Journals (Sweden)

    Mitsuhiro Numata

    2010-11-01

    Full Text Available Two dimensional island arrays and honeycomb patterns consisting of ZnO nanocrystal clusters were fabricated on predefined TiO2 seed patterns prepared by vacuum free, aerosol assisted wet-chemical synthesis. The TiO2 seed patterns were prepared by applying an aerosol of a water soluble titanium complex on hexagonally close-packed polystyrene bead arrays for different lengths of time. Scanning electron microscopy revealed that a dot array grows into a honeycomb shape as increasing amounts of the precursor were deposited. ZnO nucleation on substrates with a dot array and honeycomb patterns resulted in the formation of two discrete patterns with contrasting fill fractions of the materials.

  4. Structural and plasmonic properties of gold nanocrystals

    Science.gov (United States)

    Sivapalan, Sean T.

    the nanoparticles. The nanoparticles were then tilted such that were oriented so that the electron beam was parallel to a major zone axis and the diffraction pattern recorded. We observed streaks at each Bragg reflection that changed depending on the shape of the nanoparticle. This is in contrast to the spots for the Bragg reflections observed for normal small area diffraction patterns of gold nanoparticles. The angles between the streaks were compared using vector analysis to theoretical simulated three dimensional models and showed good correlation. These studies indicate such a platform can be used to elucidate the structure of high-index gold nanoparticle shapes such as trisoctahedra. The as-synthesized gold nanoparticles had surface plasmon resonances that incrementally spanned the spectral region of 500-900 nm. The reporter molecules used all have an absorption maximum far from the excitation wavelength. This ensures that chemical resonant based effects are minimized and plasmonic electromagnetic effects dominate the observed signal enhancement. For gold nanorods, the highest SERS signal from six different aspect ratios was observed with absorption maxima blue-shifted from the laser excitation wavelength. This finding is in contrast to substrate measurements where the maximum observed signal is red-shifted from the laser excitation wavelength. A similar platform was used to compare the effects of changing the nanoparticle shape on the observed SERS enhancement. We synthesized trisoctahedral, cubic and spherical geometries with electronic absorption maxima that overlapped within 3 nm. The relative SERS enhancement with 785 nm excitation was compared to theoretical simulations using finite element analysis. The observed signal intensities correlated well to the theory, suggesting the electromagnetic fields focused towards sharp edges and corners dominated the spectral response. The final chapters of this thesis are tailored towards understanding the distance

  5. Two-dimensional hydrogen-bonded polymers in the crystal structures of the ammonium salts of phenoxyacetic acid, (4-fluorophenoxyacetic acid and (4-chloro-2-methylphenoxyacetic acid

    Directory of Open Access Journals (Sweden)

    Graham Smith

    2014-12-01

    Full Text Available The structures of the ammonium salts of phenoxyacetic acid, NH4+·C8H6O3−, (I, (4-fluorophenoxyacetic acid, NH4+·C8H5FO3−, (II, and the herbicidally active (4-chloro-2-methylphenoxyacetic acid (MCPA, NH4+·C9H8ClO3−·0.5H2O, (III have been determined. All have two-dimensional layered structures based on inter-species ammonium N—H...O hydrogen-bonding associations, which give core substructures consisting primarily of conjoined cyclic motifs. The crystals of (I and (II are isomorphous with the core comprising R12(5, R12(4 and centrosymmetric R42(8 ring motifs, giving two-dimensional layers lying parallel to (100. In (III, the water molecule of solvation lies on a crystallographic twofold rotation axis and bridges two carboxyl O atoms in an R44(12 hydrogen-bonded motif, creating two R43(10 rings, which together with a conjoined centrosymmetric R42(8 ring incorporating both ammonium cations, generate two-dimensional layers lying parallel to (100. No π–π ring associations are present in any of the structures.

  6. Electronic structure and optical properties of the single crystal and two-dimensional structure of CdWO{sub 4} from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Babamoradi, Mohsen, E-mail: babamoradi@iust.ac.ir [Department of Physics, Iran University of Science and Technology, Narmak, 16846-13114 Tehran (Iran, Islamic Republic of); Liyai, Mohammad Reza [Department of Physics, Iran University of Science and Technology, Narmak, 16846-13114 Tehran (Iran, Islamic Republic of); Azimirad, Rouhollah, E-mail: azimirad@yahoo.com [Malek-Ashtar University of Technology, Tehran (Iran, Islamic Republic of); Salehi, Hamdollah, E-mail: salehi_h@scu.ac.ir [Department of Physics, Faculty of Science, Shahid Chamran University of Ahvaz, Ahvaz (Iran, Islamic Republic of)

    2017-04-15

    In this paper, we have investigated the electronic structure and optical properties of the single crystal and two-dimensional (2D) structure of cadmium tungstate (CdWO{sub 4}). This investigation includes calculation of the density of states (DOS), dielectric tensor elements and reflectivity. All the calculations have been done by full potential augmented plane waves plus local orbitals (FP-APW+lo) with Wien2k code. The calculated band gaps for the single crystal and 2D structure along [010] direction are 4.2 and 5.02 eV, respectively. The results show that in the 2D structure of CdWO{sub 4}, the electron density of the surface oxygen atoms is much more than the electron density of the inside oxygen atoms. This difference in the density has the main role in the optical properties. The results of the dielectric tensor elements and reflectivity for the single crystal are in good agreement with the experimental values. The results of the dielectric tensor elements and reflectivity for the 2D structure in comparison with the single crystal have shown that the intensity and place of the calculated peaks reduced and shifted, respectively. These results can be related to the surface oxygen atoms and thickness of the 2D structure.

  7. Two-dimensional calculus

    CERN Document Server

    Osserman, Robert

    2011-01-01

    The basic component of several-variable calculus, two-dimensional calculus is vital to mastery of the broader field. This extensive treatment of the subject offers the advantage of a thorough integration of linear algebra and materials, which aids readers in the development of geometric intuition. An introductory chapter presents background information on vectors in the plane, plane curves, and functions of two variables. Subsequent chapters address differentiation, transformations, and integration. Each chapter concludes with problem sets, and answers to selected exercises appear at the end o

  8. Two dimensional vernier

    Science.gov (United States)

    Juday, Richard D. (Inventor)

    1992-01-01

    A two-dimensional vernier scale is disclosed utilizing a cartesian grid on one plate member with a polar grid on an overlying transparent plate member. The polar grid has multiple concentric circles at a fractional spacing of the spacing of the cartesian grid lines. By locating the center of the polar grid on a location on the cartesian grid, interpolation can be made of both the X and Y fractional relationship to the cartesian grid by noting which circles coincide with a cartesian grid line for the X and Y direction.

  9. Two-dimensionally stacked heterometallic layers hosting a discrete chair dodecameric ring of water clusters: synthesis and structural study.

    Science.gov (United States)

    Kenfack Tsobnang, Patrice; Wenger, Emmanuel; Biache, Coralie; Lambi Ngolui, John; Ponou, Siméon; Dahaoui, Slimane; Lecomte, Claude

    2014-10-01

    The stacked two-dimensional supramolecular compound catena-{Co(amp)3Cr(ox)3·6H2O} (amp = 2-picolylamine, ox = oxalate) has been synthesized from the bimolecular approach using hydrogen bonds. It is built from layers in which both Co(amp)(3+) (D) and Cr(ox)(3-) (A) ions are bonded in a repeating DADADA… pattern along the a and c axes by multiple hydrogen bonds. These layers host a well resolved R12 dodecameric discrete ring of water clusters built by six independent molecules located around the 2c centrosymmetric Wyckoff positions of the P21/n space group in which the compound crystallizes. These clusters are ranged along the [001] direction, occupy 733.5 Å(3) (22.0%) of the unit cell and have a chair conformation via 12 hydrogen bonds. The water molecules of the cluster are linked with stronger hydrogen bonds than those between the cluster and its host, which explains the single continuous step of the dehydration process of the compound.

  10. Tunability of band structures in a two-dimensional magnetostrictive phononic crystal plate with stress and magnetic loadings

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Shunzu; Shi, Yang [Key Laboratory of Mechanics on Disaster and Environment in Western China attached to the Ministry of Education of China, Lanzhou University, Lanzhou, Gansu 730000 (China); Department of Mechanics and Engineering Sciences, College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu 730000 (China); Gao, Yuanwen, E-mail: ywgao@lzu.edu.cn [Key Laboratory of Mechanics on Disaster and Environment in Western China attached to the Ministry of Education of China, Lanzhou University, Lanzhou, Gansu 730000 (China); Department of Mechanics and Engineering Sciences, College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu 730000 (China)

    2017-03-26

    Considering the magneto-mechanical coupling of magnetostrictive material, the tunability of in-plane wave propagation in two-dimensional Terfenol-D/epoxy phononic crystal (PC) plate is investigated theoretically by the plane wave expansion method. Two Schemes, i.e. magnetic field is rotated in x–y plane and x–z plane, are studied, respectively. The effects of amplitude and direction of magnetic field, pre-stress and geometric parameters are discussed. For Scheme-I, band gap reaches the maximum at an optimal angle 45° of magnetic field. However, the optimal angle is 0° for Scheme-II, because band gap decreases monotonically until disappears with the increasing angle. For both cases, higher-order band gaps generate and become stronger as magnetic field amplitude increases, while increasing compressive pre-stress has the opposite effect. Meanwhile, filling fraction plays a key role in controlling band gaps. These results provide possibility for intelligent regulation and optimal design of PC plates. - Highlights: • The in-plane wave propagation in phononic crystal thin plate is tuned theoretically. • Magnetostrictive material is introduced in the study. • The effects of magnetic field and pre-stress are considered. • The variations of band gaps with external stimuli are discussed.

  11. Morphology dependent two photon absorption in plasmonic structures and plasmonic-organic hybrids

    Science.gov (United States)

    Gambhir, Kaweri; Ray, Bhumika; Mehrotra, Ranjana; Sharma, Parag

    2017-05-01

    Two photon absorption coefficients of two distinct plasmonic structures, namely, gold nanoflowers (GNF) and gold nanopebbles (GNP) have been investigated and compared with conventional gold nanospheres (GNS). All three different nanoshapes were synthesized by changing the reaction solvent under the same experimental procedure. Further, hybrids of these plasmonic structures were prepared with an organic dye Eosin yellow (EY), to investigate the morphology effect of plasmonic structures on plasmonic-organic hybrids in terms of their linear extinction spectra and two photon absorption coefficients. The NLO investigations were conducted using 20 ps laser pulses of wavelength 532 nm as an excitation source in single beam Z-scan setup. UV/visible spectroscopy was employed for monitoring plasmon resonances and changes in linear extinction spectra. The experimental outcomes revealed two photon absorption coefficients of EY increased 120%, 32% and 39%, while 69%, 60% and 53% enhancement in the peaks of linear extinction maxima of EY has been observed, when hybridized with GNF, GNS and GNP, respectively. This boost in the optical coefficients may be attributed to dimerization of EY molecules on the surface of nanoparticles. Keeping the toxicity of EY in view, we propose that the two photon absorption coefficients of this dye and control thereof, by the addition of plasmonic structures would be helpful not only in understanding the interactions between plasmons and fluorophore, but also pave an efficient way, to reduce the operative concentration of this hazardous dye in a wide range of applications and thereby, mitigating the environmental degradation caused by its highly concentrated effluents.

  12. Thermodynamic versus kinetic control in self-assembly of zero-, one-, quasi-two-, and two-dimensional metal-organic coordination structures.

    Science.gov (United States)

    Lin, Tao; Wu, Qi; Liu, Jun; Shi, Ziliang; Liu, Pei Nian; Lin, Nian

    2015-03-14

    Four types of metal-organic structures exhibiting specific dimensionality were studied using scanning tunneling microscopy and Monte Carlo simulations. The four structures were self-assembled out of specifically designed molecular building blocks via the same coordination motif on an Au(111) surface. We found that the four structures behaved differently in response to thermal annealing treatments: The two-dimensional structure was under thermodynamic control while the structures of lower dimension were under kinetic control. Monte Carlo simulations revealed that the self-assembly pathways of the four structures are associated with the characteristic features of their specific heat. These findings provide insights into how the dimensionality of supramolecular coordination structures affects their thermodynamic properties.

  13. Optical Manipulation with Plasmonic Beam Shaping Antenna Structures

    OpenAIRE

    Young Chul Jun; Igal Brener

    2012-01-01

    Near-field optical trapping of objects using plasmonic antenna structures has recently attracted great attention. However, metal nanostructures also provide a compact platform for general wavefront engineering of intermediate and far-field beams. Here, we analyze optical forces generated by plasmonic beam shaping antenna structures and show that they can be used for general optical manipulation such as guiding of a dielectric particle along a linear or curved trajectory. This removes the need...

  14. AlGaAs/GaAs two-dimensional electron gas structures studied by photo reflectance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Guillen Cervantes, A; Rivera Alvarez, Z; Hernandez, F; Huerta, J. [Instituto Politecnico Nacional, Mexico, D.F. (Mexico); Mendez Garcia, V. H.; Lastras Martinez, A.; Zamora, L.; Saucedo, N. [Universidad Autonoma de San Luis Potosi, San Luis Potosi (Mexico); Melendez Lira, M; Lopez, M [Instituto Politecnico Nacional, Mexico, D.F. (Mexico)

    2001-12-01

    Al{sub x} Ga{sub 1}-x As/GaAs two-dimensional electron gas (2-DEG) heterostructures were fabricated by molecular beam epitaxy in three different laboratories. The samples were characterized by room temperature Photo reflectance (PR) spectroscopy and measurements at 77 K. Internal electric fields were detected by the presence of Franz-Keldysh (FK) oscillations in the PR spectra. >From a FK analysis we obtained the GaAs band-gap energy and the built-in electric field strength in each sample. On the other hand, in the energy region corresponding to Al{sub x} Ga{sub 1}-x As a broad PR signal was registered typical of a highly doped material. Using the third derivative theory we obtained the Al{sub x} Ga{sub 1}-x As band-gap energy, and from this value the Al concentration in the samples. Results showed that the sample with highest electron mobility exhibited the lowest internal electric field strength. [Spanish] Se fabricaron heteroestructuras del tipo Al{sub x} Ga{sub 1}-x As/GaAs con un gas de electrones en dos dimensiones por medio de epitaxia de haces moleculares en tres laboratorios diferentes. Las muestras se caracterizaron por fotorreflectancia (FR) a temperatura ambiente y por mediciones del efecto mayor a 77 K. Campos electricos internos se detectaron por la presencia de oscilaciones Franz-Leldysh (FK) en los espectros de FR. Del analisis de las oscilaciones FK obtuvimos la energia de la brecha prohibida del GaAs y la intensidad del campo electrico interno en cada muestra. Por otra parte, en la region de energia correspondiente al Al{sub x} Ga{sub 1}-x As observamos una senal de FR ancha, tipica de un material altamente impurificado. Usando la teoria de la tercera derivada, obtuvimos el valor de la brecha de energia del Al{sub x}Ga{sub 1}-xAs, y de este valor la concentracion de Al en las muestras. Los resultados mostraron que la estructura con el valor de movilidad electronica mas alto tiene la intensidad de campo electrico interno mas baja.

  15. Two-dimensional IR spectroscopy and segmental 13C labeling reveals the domain structure of human γD-crystallin amyloid fibrils.

    Science.gov (United States)

    Moran, Sean D; Woys, Ann Marie; Buchanan, Lauren E; Bixby, Eli; Decatur, Sean M; Zanni, Martin T

    2012-02-28

    The structural eye lens protein γD-crystallin is a major component of cataracts, but its conformation when aggregated is unknown. Using expressed protein ligation, we uniformly (13)C labeled one of the two Greek key domains so that they are individually resolved in two-dimensional (2D) IR spectra for structural and kinetic analysis. Upon acid-induced amyloid fibril formation, the 2D IR spectra reveal that the C-terminal domain forms amyloid β-sheets, whereas the N-terminal domain becomes extremely disordered but lies in close proximity to the β-sheets. Two-dimensional IR kinetics experiments show that fibril nucleation and extension occur exclusively in the C-terminal domain. These results are unexpected because the N-terminal domain is less stable in the monomer form. Isotope dilution experiments reveal that each C-terminal domain contributes two or fewer adjacent β-strands to each β-sheet. From these observations, we propose an initial structural model for γD-crystallin amyloid fibrils. Because only 1 μg of protein is required for a 2D IR spectrum, even poorly expressing proteins can be studied under many conditions using this approach. Thus, we believe that 2D IR and protein ligation will be useful for structural and kinetic studies of many protein systems for which IR spectroscopy can be straightforwardly applied, such as membrane and amyloidogenic proteins.

  16. Evolution and structure of the plasma of current sheets forming in two-dimensional magnetic fields with a null line at low initial gas ionization and their interpretation

    Science.gov (United States)

    Ostrovskaya, G. V.; Frank, A. G.

    2012-04-01

    An analysis of the experimental data obtained by holographic interferometry in our work [1] makes it possible to explain most of the observed specific features of the structure and evolution of the plasma sheets developing in a two-dimensional magnetic field with a null line in a plasma with a low initial degree of ionization (≈10-4). The following two processes are shown to play a key role here: additional gas ionization in an electric field and the peculiarities of plasma dynamics in a current sheet expanding in time.

  17. Two-dimensional Network Crown Ether Complex. Synthesis and Crystal Structure of 18-Crown-6 Complex: [K(18-C-6) ]2[Cd-(mnt)2

    Institute of Scientific and Technical Information of China (English)

    WANG,Da-Qi(王大奇); YU,Qing-Jiang(于清江); DOU,Jian-Min(窦建民)

    2002-01-01

    The novel complex [K(18-C-6)]2[Cd(mnt)2] [18-C-6=18-crown-6, mnt= 1, 2-dicyanoethen-1, 2-dithiolate, C2S2-(CN)2- 2] was synthesized and characterized by elemental analysis,IR spectrum and X-ray diffraction analysis. The complex displays two-dimensional network structure of [ K(18-C-6)] complex segments and [Cd(mnt)2] complex segment bridged by S-K-S, S-K-N and N-K-N interactions between adjacent [K(18-C-6)] and [Cd(mnt)2] units.

  18. Syntheses and Crystal Structures of Two Two-dimensional Coordination Polymers with 2,3-Dimethylpyrazine-1,4-dioxide and Thiocyanate as Mixed Bridge Ligands

    Institute of Scientific and Technical Information of China (English)

    SHI Jing-Min; LI Wei-Nan; ZHANG Feng-Xia; ZHANG Xia; LIU Lian-Dong

    2007-01-01

    Two two-dimensional coordination polymers,[Cd(μ1,3-SCN-)2(μ1,6-L)]n 1 and [Co(μ1,3-SCN-)2(μ1,6-L)]n 2,have been synthesized with 2,3-dimethylpyrazine-1,4-dioxide (L) and thiocyanate as mixed bridging ligands,and their crystal structures were determined by X-ray crystallography.Both crystals belong to monoclinic system,space group C2/c.The other crystal parameters are as follows:for complex 1:a = 9.732(3),b = 14.658(5),c = 8.811(3) (A),β =102.935(4)°,Z = 4,V = 1225.1(7)(A)3,CsHsCdN4O2S2,Mr = 368.71,Dc.-- 1.999 g/cm3,F(000) =720 andμ = 2.117 mm-1;for complex 2:a = 9.528(7),b = 14.563(11),c = 8.415(6) (A),β =102.195(9)°,V= 1141.3(14) (A)3,Z = 4,C8H8CoN4O2S2,Mr = 315.23,Dc = 1.835 g/cm3,F(000) =636 andμ = 1.863 mm-1.The two complexes show similar two-dimensional sheet structures.Along the c axis one-dimensional chains are constructed by the coordination of Cd(Ⅱ) (or Co(Ⅱ))ions with μ1,6-L bridging ligand,and the μ1,3-SCN- bridging ligands make the chains connect to each other,resulting in the formation of a two-dimensional sheet on the ac plane.

  19. Two-dimensional optical spectroscopy

    CERN Document Server

    Cho, Minhaeng

    2009-01-01

    Discusses the principles and applications of two-dimensional vibrational and optical spectroscopy techniques. This book provides an account of basic theory required for an understanding of two-dimensional vibrational and electronic spectroscopy.

  20. Three-dimensional structural damage localization system and method using layered two-dimensional array of capacitance sensors

    Science.gov (United States)

    Curry, Mark A (Inventor); Senibi, Simon D (Inventor); Banks, David L (Inventor)

    2010-01-01

    A system and method for detecting damage to a structure is provided. The system includes a voltage source and at least one capacitor formed as a layer within the structure and responsive to the voltage source. The system also includes at least one sensor responsive to the capacitor to sense a voltage of the capacitor. A controller responsive to the sensor determines if damage to the structure has occurred based on the variance of the voltage of the capacitor from a known reference value. A method for sensing damage to a structure involves providing a plurality of capacitors and a controller, and coupling the capacitors to at least one surface of the structure. A voltage of the capacitors is sensed using the controller, and the controller calculates a change in the voltage of the capacitors. The method can include signaling a display system if a change in the voltage occurs.

  1. Multilocality and fusion rules on the generalized structure functions in two-dimensional and three-dimensional Navier-Stokes turbulence.

    Science.gov (United States)

    Gkioulekas, Eleftherios

    2016-09-01

    Using the fusion-rules hypothesis for three-dimensional and two-dimensional Navier-Stokes turbulence, we generalize a previous nonperturbative locality proof to multiple applications of the nonlinear interactions operator on generalized structure functions of velocity differences. We call this generalization of nonperturbative locality to multiple applications of the nonlinear interactions operator "multilocality." The resulting cross terms pose a new challenge requiring a new argument and the introduction of a new fusion rule that takes advantage of rotational symmetry. Our main result is that the fusion-rules hypothesis implies both locality and multilocality in both the IR and UV limits for the downscale energy cascade of three-dimensional Navier-Stokes turbulence and the downscale enstrophy cascade and inverse energy cascade of two-dimensional Navier-Stokes turbulence. We stress that these claims relate to nonperturbative locality of generalized structure functions on all orders and not the term-by-term perturbative locality of diagrammatic theories or closure models that involve only two-point correlation and response functions.

  2. Perfect optical vortex enhanced surface plasmon excitation for plasmonic structured illumination microscopy imaging

    Science.gov (United States)

    Zhang, Chonglei; Min, Changjun; Du, Luping; Yuan, X.-C.

    2016-05-01

    We propose an all-optical technique for plasmonic structured illumination microscopy (PSIM) with perfect optical vortex (POV). POV can improve the efficiency of the excitation of surface plasma and reduce the background noise of the excited fluorescence. The plasmonic standing wave patterns are excited by POV with fractional topological charges for accurate phase shift of {-2π/3, 0, and 2π/3}. The imaging resolution of less than 200 nm was produced. This PSIM technique is expected to be used as a wide field, super resolution imaging technique in dynamic biological imaging.

  3. A theoretical model for the evolution of two-dimensional large-scale coherent structures in a mixing layer

    Institute of Scientific and Technical Information of China (English)

    周恒; 马良

    1995-01-01

    By a proper combination of the modified weakly nonlinear theory of hydrodynamic stability and the energy method, the spatial evolution of the large-scale coherent structures in a mixing layer has been calculated. The results are satisfactory.

  4. SINGER: A Computer Code for General Analysis of Two-Dimensional Reinforced Concrete Structures. Volume 1. Solution Process

    Science.gov (United States)

    1975-05-01

    34 Journal of the Structural Division. ASCE, Vol. 99, St. 6, June 1973, pp. 1091-1187. 2. Bogner, F. K., Malletr, R. H., Minich , M. D., and Schmit, L. A...201. 6. Bogner, F. K., Mallett, R. H., Minich , M. D., and Schmit, L. A., "Development and Evaluation of Energy Search Methods of Non- linear... Minich , -1. ü., "An linergy Search Method for Nonlinear Structural Analysis," Case Institute of Technology, EDC Report 2-64-5, January

  5. Two-dimensional function photonic crystals

    Science.gov (United States)

    Liu, Xiao-Jing; Liang, Yu; Ma, Ji; Zhang, Si-Qi; Li, Hong; Wu, Xiang-Yao; Wu, Yi-Heng

    2017-01-01

    In this paper, we have studied two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , that can become true easily by electro-optical effect and optical kerr effect. We calculated the band gap structures of TE and TM waves, and found the TE (TM) wave band gaps of function photonic crystals are wider (narrower) than the conventional photonic crystals. For the two-dimensional function photonic crystals, when the dielectric constant functions change, the band gaps numbers, width and position should be changed, and the band gap structures of two-dimensional function photonic crystals can be adjusted flexibly, the needed band gap structures can be designed by the two-dimensional function photonic crystals, and it can be of help to design optical devices.

  6. Plasmonic coaxial waveguide-cavity devices.

    Science.gov (United States)

    Mahigir, Amirreza; Dastmalchi, Pouya; Shin, Wonseok; Fan, Shanhui; Veronis, Georgios

    2015-08-10

    We theoretically investigate three-dimensional plasmonic waveguide-cavity structures, built by side-coupling stub resonators that consist of plasmonic coaxial waveguides of finite length, to a plasmonic coaxial waveguide. The resonators are terminated either in a short or an open circuit. We show that the properties of these waveguide-cavity systems can be accurately described using a single-mode scattering matrix theory. We also show that, with proper choice of their design parameters, three-dimensional plasmonic coaxial waveguide-cavity devices and two-dimensional metal-dielectric-metal devices can have nearly identical transmission spectra. Thus, three-dimensional plasmonic coaxial waveguides offer a platform for practical implementation of two-dimensional metal-dielectric-metal device designs.

  7. Effects of electric field on structures and dynamics in a two-dimensional dust dipole particle system

    Science.gov (United States)

    Hou, X. N.; Liu, Y. H.; Huang, F.; Jiang, S. Z.; Chen, Z. Y.; Zhang, R. Y.

    2016-09-01

    Effects of radial electric field on the structures and dynamics of dust dipoles are studied by molecular dynamics simulations. The dipoles' configuration and mean distance to the system center are used to illustrate the structures of the whole system. It is shown that the dipole particles can arrange themselves into ring-like structures in the absence of external electric field, which can gradually transform to vortex, and then to radial arrangement with the increase of the strength of electric field. The trajectories, mean square displacement, and the mean speed in radial and tangential directions of dipoles are investigated to depict the effects of the radial electric filed on the collective motion of dust dipolar particles, which are closely associated with the growth of dust particle, especially for the formation of rod-like and some other complex fractal dust particles.

  8. Ultrafast Structural Fluctuations of Myoglobin-Bound Thiocyanate and Selenocyanate Ions Measured with Two-Dimensional Infrared Photon Echo Spectroscopy.

    Science.gov (United States)

    Maj, Michał; Kwak, Kyungwon; Cho, Minhaeng

    2015-11-16

    Structural dynamics within the distal cavity of myoglobin protein is investigated using 2D-IR and IR pump-probe spectroscopy of the N≡C stretch modes of heme-bound thiocyanate and selenocyanate ions. Although myoglobin-bound thiocyanate group shows a doublet in its IR absorption spectrum, no cross peaks originating from chemical exchange between the two components are observed in the time-resolved 2D IR spectra within the experimental time window. Frequency-frequency correlation functions of the two studied anionic ligands are obtained by means of a few different analysis approaches; these functions were then used to elucidate the differences in structural fluctuation around ligand, ligand-protein interactions, and the degree of structural heterogeneity within the hydrophobic pocket of these myoglobin complexes.

  9. Intercomparison of ion beam analysis software for the simulation of backscattering spectra from two-dimensional structures

    Science.gov (United States)

    Mayer, M.; Malinský, P.; Schiettekatte, F.; Zolnai, Z.

    2016-10-01

    The codes RBS-MAST, STRUCTNRA, F95-Rough and CORTEO are simulation codes for ion beam analysis spectra from two- or three-dimensional sample structures. The codes were intercompared in a code-code comparison using an idealized grating structure and by comparison to experimental data from a silicon grating on tantalum interlayer. All codes are in excellent agreement at higher incident energies and not too large energy losses. At lower incident energies, grazing angles of incidence and/or larger energy losses plural scattering effects play an increasing role. Simulation codes with plural scattering capabilities offer higher accuracy and better agreement to experimental results in this regime.

  10. Evaluation of left ventricular structures in normotensive and hypertensive subjects by two-dimensional echocardiography: Anthropometric correlates in hypertension

    Directory of Open Access Journals (Sweden)

    Mr. Agbo Julius Amaechi

    2008-07-01

    Full Text Available This study was conducted with the objective to establish a nomogram for some left ventricular structures and their alterations in hypertension. Correlations between left ventricular structures and anthropometric variables in hypertension were also established. A sample of 320 normotensive and 80 hypertensive subjects were studied. Echocardiograhic end diastolic diameter, posterior wall thickness and septal wall thickness were obtained. Subject height, weight, age and blood pressures were obtained. Blood pressures were measured in sitting position. The values of left ventricular mass (LVM, left ventricular mass index (LVMI and left relative wall thickness (RWT were computed. Parametric tests were conducted. Tests were two tailed with P < 0.05 indicating statistical significance. Normal values of left ventricular structures were established; LVM: 63.72g – 336.18g, LVMI: 38.16g/m – 222.64g/m, and RWT: 0.25 – 0.52. Significant differences (P < 0.05 were established in LVM, LVMI and RWT between normotensive and hypertensive subjects. Positive and significant correlations were noted between these variables and systolic blood pressure in hypertensive subjects. A simple linear regression of RWT on Body surface area gives RWT = - 0.058 BSA + 0.475 in normotensive subjects. Normal values of left ventricular structures and a linear regression model have been established which could be used in the assessment of morbidity in hypertension.

  11. Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool

    Science.gov (United States)

    Tongne, A.; Robe, H.; Desrayaud, C.; Jahazi, M.; Feulvarch, E.

    2016-10-01

    A finite element model has been developed by means of a coupled Eulerian-Lagrangian approach. The banded structure which is related to the periodical material deposition is predicted in two dimensions as the experimental investigation shows that, during FSW with trigonal tool, the material flow operates mainly in the welded plates plan.

  12. One and Two-dimensional Structures of a New Oxamido Copper(Ⅱ) Complex with Phthalato Bridged

    Institute of Scientific and Technical Information of China (English)

    CHEN Jing; JIANG Zong-Hui; LIAO Dai-Zheng; YAN Shi-Ping

    2005-01-01

    A new o-phthalato-bridged oxamide copper(Ⅱ) complex 1, {[Cu2(oxap)](pht)4H2O}n (oxap = N, N'-bis(2-aminopropyl)oxamide, pht = phthalate dianion), has been prepared and structurally characterized. It crystallizes in monoclinic, space group C2/c with a = 23.424(4), b = 7.9696(14), c = 15.727(3) (A), β = 129.617(2)°, C16H28Cu2N4O10, Mr = 563.50, V = 2261.6(7) (A)3, Z = 4, Dc = 1.655 g/cm3,μ(MoKα) = 1.939 mm 1, F(000) = 1160, the final R = 0.0393 and wR = 0.0928 for 1707 observed reflections with I > 2σ(Ⅰ). Single-crystal X-ray analysis reveals that 1 displays a one-dimensional zigzag chain structure, in which each Cu(oxap) moiety adopting trans-conformation is connected by μ1,6-phthalate anion bridges, and these zigzag chains are further linked by anotherμ1,6-phthalate anion bridge to form a 2D sheet structure. The polar guest water molecules reside in the inter- and intrasheets to stabilize the whole crystal structure.

  13. Structure and magnetic properties of the two-dimensional ferrimagnet (NEt4)[[Mn(salen)]2Fe(CN)6]: investigation of magnetic anisotropy on a single crystal.

    Science.gov (United States)

    Miyasaka, Hitoshi; Ieda, Hidenori; Matsumoto, Naohide; Sugiura, Ken-ichi; Yamashita, Masahiro

    2003-06-02

    The title compound, (NEt(4))[[Mn(salen)](2)Fe(CN)(6)] (1), was synthesized via a 1:1 reaction of [Mn(salen)(H(2)O)]ClO(4) with (NEt(4))(3)[Fe(CN)(6)] in a methanol/ethanol medium (NEt(4)(+) = tetraethylammonium cation, salen(2)(-) = N,N'-ethylenebis(salicylidene)iminate). The two-dimensional layered structure of 1 was revealed by X-ray crystallographic analysis: 1 crystallizes in monoclinic space group P2(1)/c with cell dimensions of a = 12.3660(8) A, b = 15.311(1) A, c = 12.918(1) A, beta = 110.971(4) degrees, Z = 2 and is isostructural to the previously synthesized compound, (NEt(4))[[Mn(5-Clsalen)](2)Fe(CN)(6)] (5-Clsalen(2-) = N,N'-ethylenebis(5-chlorosalicylidene)iminate; Miyasaka, H.; Matsumoto, N.; Re, N.; Gallo, E.; Floriani, C. Inorg. Chem. 1997, 36, 670). The Mn ion is surrounded by an equatorial salen quadridentate ligand and two axial nitrogen atoms from the [Fe(CN)(6)](3-) unit, the four Fe[bond]CN groups of which coordinate to the Mn ions of [Mn(salen)](+) units, forming a two-dimensional network having [[bond]Mn[bond]NC[bond]Fe[bond]CN[bond

  14. A two-dimensional Riemann solver with self-similar sub-structure - Alternative formulation based on least squares projection

    Science.gov (United States)

    Balsara, Dinshaw S.; Vides, Jeaniffer; Gurski, Katharine; Nkonga, Boniface; Dumbser, Michael; Garain, Sudip; Audit, Edouard

    2016-01-01

    Just as the quality of a one-dimensional approximate Riemann solver is improved by the inclusion of internal sub-structure, the quality of a multidimensional Riemann solver is also similarly improved. Such multidimensional Riemann problems arise when multiple states come together at the vertex of a mesh. The interaction of the resulting one-dimensional Riemann problems gives rise to a strongly-interacting state. We wish to endow this strongly-interacting state with physically-motivated sub-structure. The self-similar formulation of Balsara [16] proves especially useful for this purpose. While that work is based on a Galerkin projection, in this paper we present an analogous self-similar formulation that is based on a different interpretation. In the present formulation, we interpret the shock jumps at the boundary of the strongly-interacting state quite literally. The enforcement of the shock jump conditions is done with a least squares projection (Vides, Nkonga and Audit [67]). With that interpretation, we again show that the multidimensional Riemann solver can be endowed with sub-structure. However, we find that the most efficient implementation arises when we use a flux vector splitting and a least squares projection. An alternative formulation that is based on the full characteristic matrices is also presented. The multidimensional Riemann solvers that are demonstrated here use one-dimensional HLLC Riemann solvers as building blocks. Several stringent test problems drawn from hydrodynamics and MHD are presented to show that the method works. Results from structured and unstructured meshes demonstrate the versatility of our method. The reader is also invited to watch a video introduction to multidimensional Riemann solvers on http://www.nd.edu/~dbalsara/Numerical-PDE-Course.

  15. Optical Spectroscopy of Two Dimensional Graphene and Boron Nitride

    Science.gov (United States)

    Ju, Long

    This dissertation describes the use of optical spectroscopy in studying the physical properties of two dimensional nano materials like graphene and hexagonal boron nitride. Compared to bulk materials, atomically thin two dimensional materials have a unique character that is the strong dependence of physical properties on external control. Both electronic band structure and chemical potential can be tuned in situ by electric field-which is a powerful knob in experiment. Therefore the optical study at atomic thickness scale can greatly benefit from modern micro-fabrication technique and electric control of the material properties. As will be shown in this dissertation, such control of both gemometric and physical properties enables new possibilities of optical spectroscopic measurement as well as opto-electronic studies. Other experimental techniques like electric transport and scanning tunneling microscopy and spectroscopy are also combined with optical spectroscopy to reveal the physics that is beyond the reach of each individual technique. There are three major themes in the dissertation. The first one is focused on the study of plasmon excitation of Dirac electrons in monolayer graphene. Unlike plasmons in ordinary two dimensional electron gas, plasmons of 2D electrons as in graphene obey unusual scaling laws. We fabricate graphene micro-ribbon arrays with photolithography technique and use optical absorption spectroscopy to study its absorption spectrum. The experimental result demonstrates the extraordinarily strong light-plasmon coupling and its novel dependence on both charge doping and geometric dimensions. This work provides a first glance at the fundamental properties of graphene plasmons and forms the basis of an emerging subfield of graphene research and applications such as graphene terahertz metamaterials. The second part describes the opto-electronic response of heterostructures composed of graphene and hexagonal boron nitride. We found that there is

  16. Effect of the initial plasma parameters on the structure of the current sheets developing in two-dimensional magnetic fields with a null line

    Science.gov (United States)

    Ostrovskaya, G. V.; Frank, A. G.; Bogdanov, S. Yu.

    2010-07-01

    The effect of the initial plasma parameters on the structure of the plasma of the current sheets that form in two-dimensional magnetic fields with a null line is studied by holographic interferometry. The evolution of the plasma sheets that develop in an initial low-density plasma, where a gas is mainly ionized by a pulse current passing through the plasma and initiating the formation of a current sheet, has been comprehensively studied for the first time. At the early stage of evolution, the spatial structure of such a plasma sheet differs substantially from the classic current sheets forming in a dense plasma. Nevertheless, extended plasma sheets with similar parameters form eventually irrespective of the initial plasma density.

  17. Two-dimensional (2D) infrared correlation study of the structural characterization of a surface immobilized polypeptide film stimulated by pH

    Science.gov (United States)

    Chae, Boknam; Son, Seok Ho; Kwak, Young Jun; Jung, Young Mee; Lee, Seung Woo

    2016-11-01

    The pH-induced structural changes to surface immobilized poly (L-glutamic acid) (PLGA) films were examined by Fourier transform infrared (FTIR) spectroscopy and two-dimensional (2D) correlation analysis. Significant spectral changes were observed in the FTIR spectra of the surface immobilized PLGA film between pH 6 and 7. The 2D correlation spectra constructed from the pH-dependent FTIR spectra of the surface immobilized PLGA films revealed the spectral changes induced by the alternations of the protonation state of the carboxylic acid group in the PLGA side chain. When the pH was increased from 6 to 8, weak spectral changes in the secondary structure of the PLGA main chain were induced by deprotonation of the carboxylic acid side group.

  18. Crystallization of a Two-Dimensional Hydrogen-Bonded Molecular Assembly: Evolution of the Local Structure Resolved by Atomic Force Microscopy.

    Science.gov (United States)

    Patera, Laerte L; Liu, Xunshan; Mosso, Nico; Decurtins, Silvio; Liu, Shi-Xia; Repp, Jascha

    2017-08-28

    Structures of the aromatic N-heterocyclic hexaazatriphenylene (HAT) molecular synthon obtained by surface-assisted self-assembly were analyzed with sub-Å resolution by means of noncontact atomic force microscopy (nc-AFM), both in the kinetically trapped amorphous state and in the thermodynamically stable crystalline phase. These results reveal how the crystallization governs the length scale of the network order for non-flexible molecular species without affecting the local bonding schemes. The capability of nc-AFM to accurately resolve structural relaxations will be highly relevant for the characterization of vitreous two-dimensional supramolecular materials. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Optimization of extraordinary optical absorption in plasmonic and dielectric structures

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard; Sigmund, Ole

    2013-01-01

    Extraordinary optical absorption (EOA) can be obtained by plasmonic surface structuring. However, studies that compare the performance of these plasmonic devices with similar structured dielectric devices are rarely found in the literature. In this work we show different methods to enhance the EOA...... silicon layer for certain optical wavelengths compared to metal strips. It is then demonstrated that by topology optimization it is possible to generate nonintuitive surface designs that perform even better than the simple strip designs for both silicon and metals. These results indicate that in general...... by optimizing the geometry of the surface structuring for both plasmonic and dielectric devices, and the optimized performances are compared. Two different problem types with periodic structures are considered. The first case shows that strips of silicon on a surface can increase the absorption in an underlying...

  20. Cancellation exponent and multifractal structure in two-dimensional magnetohydrodynamics: direct numerical simulations and Lagrangian averaged modeling.

    Science.gov (United States)

    Graham, Jonathan Pietarila; Mininni, Pablo D; Pouquet, Annick

    2005-10-01

    We present direct numerical simulations and Lagrangian averaged (also known as alpha model) simulations of forced and free decaying magnetohydrodynamic turbulence in two dimensions. The statistics of sign cancellations of the current at small scales is studied using both the cancellation exponent and the fractal dimension of the structures. The alpha model is found to have the same scaling behavior between positive and negative contributions as the direct numerical simulations. The alpha model is also able to reproduce the time evolution of these quantities in free decaying turbulence. At large Reynolds numbers, an independence of the cancellation exponent with the Reynolds numbers is observed.

  1. 基于FPGA快速二维DCT图像编码结构%FPGA Rapid Two-dimensional DCT Image Coding Structure

    Institute of Scientific and Technical Information of China (English)

    龙飞; 李良荣; 李绪诚

    2012-01-01

    本文提出了一种二维DCT快速算法的FPGA实现结构,采用行列分解算法将二维DCT分解成两个一维DCT和一个转置缓冲器组成的结构,其中一雏DCT借鉴Arai DCT算法,并采取了FPGA特有的并行的流水线技术,该结构极大减少了加法器和乘法器的数量,节省了计算时间.该结构的特点是高数据吞吐率、硬件资源消耗少,功耗低.实验结果证明了二维DCT核设计的正确性,适合图像的实时处理.%In this paper, a two-dimensional DCT fast algorithm for FPGA implementation structure. Decomposition algorithm using the line-column, 2D-DCT is broken down into the structure of two 1D-DCT and a transpose buffer, and 1D-DCT is learn from Arai DCT algorithm, and mining is indeed a unique parallel pipeline technique in FPGA. The structure greatly reduces the adder and multiplier is the number, to save calculation time. The structure is characterized by high data throughput, the hardware resource consumption, low power consumption. The experimental results show the correctness of the two-dimensional DCT core design, suitable for real-time processing of the image.

  2. Two-dimensional inorganic–organic hybrid semiconductors composed of double-layered ZnS and monoamines with aromatic and heterocyclic aliphatic rings: Syntheses, structures, and properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Sujing; Li, Jing, E-mail: jingli@rutgers.edu

    2015-04-15

    As an addition to the II–VI based inorganic–organic hybrid semiconductor family, five new two-dimensional (2D) double-layered structures have been synthesized employing monoamines with different aromatic or heterocyclic aliphatic rings. Zn{sub 2}S{sub 2}(bza) (1), Zn{sub 2}S{sub 2}(mbza) (2), Zn{sub 2}S{sub 2}(fbza) (3), Zn{sub 2}S{sub 2}(pca) (4), and Zn{sub 2}S{sub 2}(thfa) (5) (bza=benzylamine, mbza=4-methoxybenzylamine, fbza=4-flurobenzylamine, pca=3-picolylamine, and thfa=tetrahydrofurfurylamine) are prepared by solvothermal reactions and characterized by different analytical methods, including powder X-ray diffraction, optical diffuse reflection, thermogravimetric analysis and photoluminescence spectroscopy. The powder X-ray diffraction patterns show that all five compounds adopt 2D double-layered structures. Optical diffuse reflectance spectra of these compounds suggest that they have notably lower band gaps than those of the similar compounds composed of aliphatic alkyl amines. Their photoluminescence properties and thermal stability are also analyzed. - Graphical abstract: Five new members of two-dimensional double-layered 2D-Zn{sub 2}S{sub 2}(L) (L=Ligand) structures employing monoamines with different aromatic or heterocyclic aliphatic rings have been designed, synthesized, and characterized. - Highlights: • A new sub-family of II-VI based hybrid semiconductors are designed, synthesized, and structurally characterized using amines with aromatic or aliphatic cyclic rings. • These compounds have notably lower band gaps than those made of aliphatic alkyl amines, greatly broadening the range of band gaps of this material family. • They emit strongly with systematically tunable emission intensity and energy.

  3. Two-dimensional quantum repeaters

    Science.gov (United States)

    Wallnöfer, J.; Zwerger, M.; Muschik, C.; Sangouard, N.; Dür, W.

    2016-11-01

    The endeavor to develop quantum networks gave rise to a rapidly developing field with far-reaching applications such as secure communication and the realization of distributed computing tasks. This ultimately calls for the creation of flexible multiuser structures that allow for quantum communication between arbitrary pairs of parties in the network and facilitate also multiuser applications. To address this challenge, we propose a two-dimensional quantum repeater architecture to establish long-distance entanglement shared between multiple communication partners in the presence of channel noise and imperfect local control operations. The scheme is based on the creation of self-similar multiqubit entanglement structures at growing scale, where variants of entanglement swapping and multiparty entanglement purification are combined to create high-fidelity entangled states. We show how such networks can be implemented using trapped ions in cavities.

  4. Excitation of Terahertz Charge Transfer Plasmons in Metallic Fractal Structures

    Science.gov (United States)

    Ahmadivand, Arash; Gerislioglu, Burak; Sinha, Raju; Vabbina, Phani Kiran; Karabiyik, Mustafa; Pala, Nezih

    2017-08-01

    There have been extensive researches on terahertz (THz) plasmonic structures supporting resonant modes to demonstrate nano and microscale devices with high efficiency and responsivity as well as frequency selectivity. Here, using antisymmetric plasmonic fractal Y-shaped (FYS) structures as building blocks, we introduce a highly tunable four-member fractal assembly to support charge transfer plasmons (CTPs) and classical dipolar resonant modes with significant absorption cross section in the THz domain. We first present that the unique geometrical nature of the FYS system and corresponding spectral response allow for supporting intensified dipolar plasmonic modes under polarised light exposure in a standalone structure. In addition to classical dipolar mode, for the very first time, we demonstrated CTPs in the THz domain due to the direct shuttling of the charges across the metallic fractal microantenna which led to sharp resonant absorption peaks. Using both numerical and experimental studies, we have investigated and confirmed the excitation of the CTP modes and highly tunable spectral response of the proposed plasmonic fractal structure. This understanding opens new and promising horizons for tightly integrated THz devices with high efficiency and functionality.

  5. Robust multispectral transparency in continuous metal film structures via multiple near-field plasmon coupling by a finite-difference time-domain method.

    Science.gov (United States)

    Liu, Gui-qiang; Hu, Ying; Liu, Zheng-qi; Chen, Yuan-hao; Cai, Zheng-jie; Zhang, Xiang-nan; Huang, Kuan

    2014-03-07

    We propose a robust multispectral transparent plasmonic structure and calculate its transparency response by using the three-dimensional finite-difference time-domain (FDTD) method. The proposed structure is composed of a continuous ultrathin metal film sandwiched by double two-dimensional (2D) hexagonal non-close-packed metal-dielectric multilayer core-shell nanoparticle arrays. The top and bottom plasmonic arrays in such a structure, respectively, act as the light input and output couplers to carry out the efficient trapping and release of light. Near-perfect multispectral optical transparency in the visible and near-infrared regions is achieved theoretically. The calculated electric field distribution patterns show that the near-perfect multispectral optical transparency mainly originates from the excitation and hybridization of shell and core plasmon modes, strong near-field coupling of dipole plasmon modes between adjacent nanoparticles as well as the excitation of surface plasmon waves of the metal film. The robust transparency bands can be efficiently tuned in a large range by varying the structural parameters and the surrounding dielectric environment. The proposed structure also shows additional merits such as a deep sub-wavelength size and fully retained electrical and mechanical properties of the natural metal. These features might provide promising applications in highly integrated optoelectronic devices including plasmonic filters, nanoscale multiplexers, and non-linear optics.

  6. Understanding the two-dimensional ionization structure in luminous infrared galaxies. A near-IR integral field spectroscopy perspective

    CERN Document Server

    Colina, Luis; Arribas, Santiago; Riffel, Rogerio; Riffel, Rogemar A; Rodriguez-Ardila, Alberto; Pastoriza, Miriani; Storchi-Bergmann, Thaisa; Alonso-Herrero, Almudena; Sales, Dinalva

    2015-01-01

    We investigate the 2D excitation structure of the ISM in a sample of LIRGs and Seyferts using near-IR IFS. This study extends to the near-IR the well-known optical and mid-IR emission line diagnostics used to classify activity in galaxies. Based on the spatially resolved spectroscopy of prototypes, we identify in the [FeII]1.64/Br$\\gamma$ - H_2 1-0S(1)/Br$\\gamma$ plane regions dominated by the different heating sources, i.e. AGNs, young MS massive stars, and evolved stars i.e. supernovae. The ISM in LIRGs occupy a wide region in the near-IR diagnostic plane from -0.6 to +1.5 and from -1.2 to +0.8 (in log units) for the [FeII]/Br$\\gamma$ and H_2/Br$\\gamma$ line ratios, respectively. The corresponding median(mode) ratios are +0.18(0.16) and +0.02(-0.04). Seyferts show on average larger values by factors ~2.5 and ~1.4 for the [FeII]/Br$\\gamma$ and H_2/Br$\\gamma$ ratios, respectively. New areas and relations in the near-IR diagnostic plane are defined for the compact, high surface brightness regions dominated by ...

  7. A new integral representation for quasiperiodic fields and its application to two-dimensional band structure calculations

    CERN Document Server

    Barnett, Alex H

    2010-01-01

    In this paper, we consider band-structure calculations governed by the Helmholtz or Maxwell equations in piecewise homogeneous periodic materials. Methods based on boundary integral equations are natural in this context, since they discretize the interface alone and can achieve high order accuracy in complicated geometries. In order to handle the quasi-periodic conditions which are imposed on the unit cell, the free-space Green's function is typically replaced by its quasi-periodic cousin. Unfortunately, the quasi-periodic Green's function diverges for families of parameter values that correspond to resonances of the empty unit cell. Here, we bypass this problem by means of a new integral representation that relies on the free-space Green's function alone, adding auxiliary layer potentials on the boundary of the unit cell itself. An important aspect of our method is that by carefully including a few neighboring images, the densities may be kept smooth and convergence rapid. This framework results in an integr...

  8. Band structure effects on resonant tunneling in III-V quantum wells versus two-dimensional vertical heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Philip M., E-mail: philip.campbell@gatech.edu [School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Electronic Systems Laboratory, Georgia Tech Research Institute, Atlanta, Georgia 30332 (United States); Tarasov, Alexey; Joiner, Corey A.; Vogel, Eric M. [School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States); Ready, W. Jud [Electronic Systems Laboratory, Georgia Tech Research Institute, Atlanta, Georgia 30332 (United States)

    2016-01-14

    Since the invention of the Esaki diode, resonant tunneling devices have been of interest for applications including multi-valued logic and communication systems. These devices are characterized by the presence of negative differential resistance in the current-voltage characteristic, resulting from lateral momentum conservation during the tunneling process. While a large amount of research has focused on III-V material systems, such as the GaAs/AlGaAs system, for resonant tunneling devices, poor device performance and device-to-device variability have limited widespread adoption. Recently, the symmetric field-effect transistor (symFET) was proposed as a resonant tunneling device incorporating symmetric 2-D materials, such as transition metal dichalcogenides (TMDs), separated by an interlayer barrier, such as hexagonal boron-nitride. The achievable peak-to-valley ratio for TMD symFETs has been predicted to be higher than has been observed for III-V resonant tunneling devices. This work examines the effect that band structure differences between III-V devices and TMDs has on device performance. It is shown that tunneling between the quantized subbands in III-V devices increases the valley current and decreases device performance, while the interlayer barrier height has a negligible impact on performance for barrier heights greater than approximately 0.5 eV.

  9. Spatial structure of correlations around a quantum impurity at the edge of a two-dimensional topological insulator

    Science.gov (United States)

    Allerdt, Andrew; Feiguin, A. E.; Martins, G. B.

    2017-07-01

    We calculate exact zero-temperature real-space properties of a substitutional magnetic impurity coupled to the edge of a zigzag silicenelike nanoribbon. Using a Lanczos transformation [A. Allerdt et al., Phys. Rev. B 91, 085101 (2015), 10.1103/PhysRevB.91.085101] and the density-matrix renormalization-group method, we obtain a realistic description of stanene and germanene that includes the bulk and the edges as boundary one-dimensional helical metallic states. Our results for substitutional impurities indicate that the development of a Kondo state and the structure of the spin correlations between the impurity and the electron spins in the metallic edge state depend considerably on the location of the impurity. More specifically, our real-space resolution allows us to conclude that there is a sharp distinction between the impurity being located at a crest or a trough site at the zigzag edge. We also observe, as expected, that the spin correlations are anisotropic due to an emerging Dzyaloshinskii-Moriya interaction with the conduction electrons and that the edges scatter from the impurity and "snake" or circle around it. Our estimates for the Kondo temperature indicate that there is a very weak enhancement due to the presence of spin-orbit coupling.

  10. First-principles investigation of the effect of charged unit cell on the electronic structure of two-dimensional MoS2

    Science.gov (United States)

    Shekaari, Ashkan; Abolhassani, Mohammad Reza; Lashgari, Hamed

    2017-01-01

    Density-functional theory has been applied to investigate the effect of charged unit cell on the structural and electronic properties of two-dimensional MoS2 within PBE-GGA. The charge of the unit cell of the monolayer changes from zero to n = ± 4 e with e the absolute value of the elementary electric charge. Variations of the lattice constant, Mo-S bond length, S-Mo-S bond angle, total energy, exchange and correlation contributions, and the Fermi level versus n have been calculated quantitatively, indicating decrease in the stability of the atomic structure of the monolayer with increase in the absolute value of n. It is found that the Fermi level for two-dimensional MoS2 is a function of both the number of electrons in allowed states and the inverse of the volume of the unit cell. The electronic properties of each monolayer have been also calculated via examining the related electronic band structure and density of states. Results broadly support the view that the effect of charged unit cell (n =+ e to - 4 e) on the electronic properties of MoS2 monolayer is manifested in the form of semiconductor-to-metal transition in addition to the Fermi level shift. It is also verified that as the negative charge of the unit cell increases from n = - e to - 4 e , there is an ever-increasing trend in the total number of allowed electronic states at the Fermi level, implying a direct correlation between electrical conductivity and the value of n in a way that the more negative the charge of the unit cell, the higher the electrical conductivity of the monolayer.

  11. A two-dimensional zinc(II) coordination polymer based on mixed dimethyl succinate and bipyridine ligands: synthesis, structure, thermostability and luminescence properties.

    Science.gov (United States)

    Liu, Yang; Feng, Yong Lan; Fu, Wei Wei

    2016-04-01

    From the viewpoint of crystal engineering, the construction of crystalline polymeric materials requires a rational choice of organic bridging ligands for the self-assembly process. Multicarboxylate ligands are of particular interest due to their strong coordination activity towards metal ions, as well as their various coordination modes and versatile conformations. The structural chemistry of dicarboxylate-based coordination polymers of transition metals has been developed through the grafting of N-containing organic linkers into carboxylate-bridged transition metal networks. A new luminescent two-dimensional zinc(II) coordination polymer containing bridging 2,2-dimethylsuccinate and 4,4'-bipyridine ligands, namely poly[[aqua(μ2-4,4'-bipyridine-κ(2)N:N')bis(μ3-2,2-dimethylbutanedioato)-κ(4)O(1),O(1'):O(4):O(4');κ(5)O(1):O(1),O(4):O(4),O(4')-dizinc(II)] dihydrate], {[Zn2(C6H8O4)2(C10H8N2)(H2O)]·2H2O}n, has been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction and elemental, IR and thermogravimetric analyses. In the structure, the 2,2-dimethylsuccinate ligands link linear tetranuclear Zn(II) subunits into one-dimensional chains along the c axis. 4,4'-Bipyridine acts as a tethering ligand expanding these one-dimensional chains into a two-dimensional layered structure. Hydrogen-bonding interactions between the water molecules (both coordinated and free) and carboxylate O atoms strengthen the packing of the layers. Furthermore, the luminescence properties of the complex were investigated. The compound exhibits a blue photoluminescence in the solid state at room temperature and may be a good candidate for potential hybrid inorganic-organic photoactive materials.

  12. Development and testing of a two-dimensional ultrasonic laboratory model system for seismic imaging of heterogeneous structures

    Science.gov (United States)

    Mo, Yike; Karaman, Hakki; Greenhalgh, Stewart

    2014-05-01

    To tackle the challenges and imaging problems of complex structures, we have recently assembled within the Wave Propagation Lab at ETH Zürich a simple 2D ultrasonic model facility in which the simulated geological structures are constructed from thin (2 mm thickness) metal and plastic sheets, cut and bonded together. The models were used, in full recognition of the similitude relations, to investigate reflections from beneath a low velocity distorting overburden. Besides uniform and irregular near surface layers, flat and dipping interfaces as well as rectangular high and low velocity block inserts were investigated. The experiments entailed the use of a piezoelectric source driven by a pulse amplifier at ultrasonic frequencies (20-300 kHz) to generate Lamb waves in the plate, which are detected by piezoelectric receivers and recorded digitally on a National Instruments recording system, under SignalExpress software control. In the lab system, a single cycle sinusoidal pulse with a negative onset (5 μs pulse width and 600 V pulse voltage) was selected as the optimized source pulse. Transducers can be placed along the thin edges of the plate in reflection mode (same edge) or transmission mode (opposite edges, or perpendicular edges). Alternatively they can be mounted on the flat planar surface of the plate to simulate a crosshole survey. Data were originally collected in all different recording geometries over a homogenous aluminium model for calibration purposes and to examine wave modes and propagation characteristics. The two dominant Lamb waves recorded are the fundamental symmetric mode (non-dispersive) and the fundamental antisymmetric (flexural) dispersive mode, which is normally absent when the source transducer is located on a model edge but dominant when it is on the flat planar surface of the plate. Only the symmetric Lamb mode can be used as a proxy for 2D propagation in an extended medium (the field situation). Experimental group and phase velocity

  13. The structures and properties of the new two-dimensional inorganic–organic hybrid materials based on the molybdate chains

    Energy Technology Data Exchange (ETDEWEB)

    Li, Na; Mu, Bao; Cao, Xinyu; Huang, Rudan, E-mail: huangrd@bit.edu.cn

    2014-09-15

    A series of inorganic organic hybrid materials based on polyoxometalates(POMs), namely, [M{sup II}(HL){sub 2}(H{sub 2}O){sub 2}][Mo{sup VI}{sub 6}O{sub 20}] [M=Co (1), Ni (2), Cu (3), Zn (4)], [Mn{sup IV}L{sub 2}(H{sub 2}O){sub 2}][Mo{sup VI}{sub 6}O{sub 20}] (5), and (HL){sub 3}PMO{sub 12}O{sub 40} (6) [L=3-(4-pyridyl)pyrazole], have been synthesized. The compounds have been characterized by elemental analysis, powder X-ray diffraction (PXRD) and single-crystal X-ray diffraction. The results from single-crystal X-ray diffraction indicate that 1–5 are isostructural. It is worth noting that the polyanions are bridged by Mo–O–Mo to form 1D inorganic chains, which are further connected via M ions to form 2D nets. In compound 6, the ligands are used as the positive ions to balance the charge of the compound. Moreover, the magnetic properties of compound 5 have also been investigated in detail. - Graphical abstract: In complex 1, The Co ion is six coordinated by four oxygen atoms from two Mo{sub 6}O{sub 20} and two water molecules, and two N atoms from two different ligand. It is noticeable that there is an one-dimensional chain molybdate, which is combined by O–Mo–O, then the chain parallel with each other, the Mo{sub 6} anion acts as a bidentate ligand providing O7 atoms to bridge CoII ions to form a 2D inorganic layer. Finally every nets become 3D structure by hydrogen bond. - Highlights: • Novel inorganic–organic hybrid materials have been prepared. • Compounds 1–5 contain the 1D molybdate chains composed of (MoO{sub 6}) octahedra. • The 1D chains parallel with each other to form a 2D inorganic layer.

  14. Existence of shocklets in a two-dimensional supersonic mixing layer and its influence on the flow structure

    Institute of Scientific and Technical Information of China (English)

    CAO; Wei

    2001-01-01

    gravitational lens sys-tem 2016 + 112, Astrophys. J. , 1985, 294: 66.[39]Aldcroft, T. L. , Bechtold, J. , Elvis, M. , MglI absorption in a sample of 56 steep-spectrum quasars, Astrophys. J. Sup-pl., 1994, 93: 1.[40]Verib-Getty, M. P., Veron, P., A catalogue of quasars and active nuclei, ESO Scientific Report, 1996, 17: 1.[41]Hewitt, A., Burbidge, G., A revised and updated catalog of quas-stellar objects, Astrophys, J. Suppl., 1993, 87: 451.[42]Rudy, R. J., Cohan, R. D., Ake, T. B., Ultraviolet and optical spectrophyotometry of the seyfert 1.8 galaxy Markarian 609, Astrophys. J., 1988, 332: 172.[43]Bregrmamn, T. S. , Pastoriza, M. G. , On the metal abundance of low-activity galactic nuclei, Astrophys. J. , 1989, 347:195.[44]Malkan, M. A., Oke, J. B., IUE observations of Markarian 3 and 6: reddening and nonstellar continuum, Astrophys. J. ,1983, 265: 92.[45]Oke, J. B., Goodrich, R. W., IUE and VISUAl spectrophotometry of Markarian 9, Markarian 10, and 3C 390.3, Astro-phys. J., 1981, 243: 445.[46]Crenshaw, D. M. , Peterson, B. M. , Korista, K. , Ultraviolet and optical spectra of high-ionization Seyfert galaxies with nar-row lines, AJ, 1991, 101: 1202.[47]Voit, G. M. , Shull, J. M. , Begelman, M. C. , Broad, variable absorption lines in the Seyfert Galaxy NGC 3516-probing the structure of the emission-line regions, Astrophys. J., 1987, 316: 573.[48]Reichert, G. A., Rodriguez-Pascual, P. M. , Alloin, D. et al., Steps toward determination of the size and structure of the broad-line region in active galactic, Astrophys. J., 1994, 425: 582.[49]Setti, G., Woltjer, L., Hubble Diagram for Quasars, Astrophys. J., 1973, 181: L61.[50]Baldwin, J. A. , Burke, W. L. , Gaskell, M. G. et al. , Relative quasar luminosities determined from emission line strengths, Nature, 1978, 273: 431.[51]Bressan, A., Chiosi, C., Fagotto, F., Spectrophotometric evolution of elliptical galaxies, Astrophys. J. Suppl., 1994, 94:63.[52]Scappa, R. , Urry, C. M

  15. Observation of the variations of the domain structure of a spontaneous electric field in a two-dimensional electron system under microwave irradiation

    Science.gov (United States)

    Dorozhkin, S. I.; Umansky, V.; von Klitzing, K.; Smet, J. H.

    2016-11-01

    It has been found on a sample of the GaAs/AlGaAs heterostructure with the two-dimensional electron system that different configurations of domains of a spontaneous electric field are possible within one microwave- induced state with the resistance tending to zero. Transitions between such configurations are observed at the variation of the radiation power and magnetic field. In the general case, the configuration of domains is more complicated than existing models. The fragment of the distribution of the electric field in the sample for one of the observed configurations is in agreement with the rhombic domain structure considered by I. G. Finkler and B. I. Halperin, Phys. Rev. B 79, 085315 (2009).

  16. Electronic band structure and Fermi surfaces of the quasi-two-dimensional monophosphate tungsten bronze, P4W12O44

    Science.gov (United States)

    Paul, S.; Ghosh, A.; Sato, T.; Sarma, D. D.; Takahashi, T.; Wang, E.; Greenblatt, M.; Raj, S.

    2014-02-01

    The electronic structure of quasi-two-dimensional monophosphate tungsten bronze, P4W12O44, has been investigated by high-resolution angle-resolved photoemission spectroscopy and density functional theoretical calculations. Experimental electron-like bands around \\Gamma point and Fermi surfaces have similar shapes as predicted by calculations. Fermi surface mapping at different temperatures shows a depletion of density of states at low temperature in certain flat portions of the Fermi surfaces. These flat portions of the Fermi surfaces satisfy the partial nesting condition with incommensurate nesting vectors q_1 and q_2 , which leads to the formation of charge density waves in this phosphate tungsten bronzes. The setting up of charge density wave in these bronzes can well explain the anomaly observed in its transport properties.

  17. Acousto-optical interaction of surface acoustic and optical waves in a two-dimensional phoxonic crystal hetero-structure cavity.

    Science.gov (United States)

    Ma, Tian-Xue; Zou, Kui; Wang, Yue-Sheng; Zhang, Chuanzeng; Su, Xiao-Xing

    2014-11-17

    Phoxonic crystal is a promising material for manipulating sound and light simultaneously. In this paper, we theoretically demonstrate the propagation of acoustic and optical waves along the truncated surface of a two-dimensional square-latticed phoxonic crystal. Further, a phoxonic crystal hetero-structure cavity is proposed, which can simultaneously confine surface acoustic and optical waves. The interface motion and photoelastic effects are taken into account in the acousto-optical coupling. The results show obvious shifts in eigenfrequencies of the photonic cavity modes induced by different phononic cavity modes. The symmetry of the phononic cavity modes plays a more important role in the single-phonon exchange process than in the case of the multi-phonon exchange. Under the same deformation, the frequency shift of the photonic transverse electric mode is larger than that of the transverse magnetic mode.

  18. Patterning the two dimensional electron gas at the LaAlO3/SrTiO3 interface by structured Al capping

    Science.gov (United States)

    Zhou, Y.; Wang, P.; Luan, Z. Z.; Shi, Y. J.; Jiang, S. W.; Ding, H. F.; Wu, D.

    2017-04-01

    We demonstrate an approach for patterning a quasi-two dimensional electron gas (q-2DEG) at the interface of LaAlO3 (LAO) and SrTiO3 (STO) utilizing a structured Al capping layer. The capping of Al enables the formation of q-2DEG at the interface of 1-3 unit cells (uc) of LAO on STO, which was originally insulating before capping. The properties of the q-2DEG induced by the Al capping layer are essentially the same as those of q-2DEG without Al. Therefore, we can pattern q-2DEG by simply patterning the Al film on LAO (2 or 3 uc)/STO using a one-step liftoff process. Our approach circumvents the difficulty of direct patterning of oxide materials and provides a simple and robust patterning method for future device applications based on complex oxide interfaces.

  19. Subband Structure of a Two-Dimensional Electron Gas Formed at the Polar Surface of the Strong Spin-Orbit Perovskite KTaO3

    Energy Technology Data Exchange (ETDEWEB)

    King, P.D.C.

    2012-03-01

    We demonstrate the formation of a two-dimensional electron gas (2DEG) at the (100) surface of the 5d transition-metal oxide KTaO{sub 3}. From angle-resolved photoemission, we find that quantum confinement lifts the orbital degeneracy of the bulk band structure and leads to a 2DEG composed of ladders of subband states of both light and heavy carriers. Despite the strong spin-orbit coupling, we find no experimental signatures of a Rashba spin splitting, which has important implications for the interpretation of transport measurements in both KTaO{sub 3}- and SrTiO{sub 3}-based 2DEGs. The polar nature of the KTaO{sub 3}(100) surface appears to help mediate formation of the 2DEG as compared to non-polar SrTiO{sub 3}(100).

  20. Formation of proto-cluster: a virialized structure from gravo-turbulent collapse II. A two-dimensional analytical model for rotating and accreting system

    CERN Document Server

    Lee, Yueh-Ning

    2016-01-01

    Most stars are born in the gaseous proto-cluster environment. The knowledge of this intermediate stage gives more accurate constraints on star formation characteristics. We demonstrate that a virialized globally supported structure, in which star formation happens, is formed out of a collapsing molecular cloud, and derive a mapping from the parent cloud parameters to the proto-cluster to predict its properties, with a view to confront analytical calculations with observations and simulations. The virial theorem is decomposed into two dimensions to account for the rotation and the flattened geometry. Equilibrium is found by balancing rotation, turbulence and self-gravity, while turbulence is maintained by accretion driving and dissipates in one crossing time. The angular momentum and the accretion rate of the proto-cluster are estimated from the parent cloud properties. The two-dimensional virial model predicts the size and velocity dispersion given the mass of the proto-cluster and that of the parent cloud. T...

  1. Analysis of the horizontal two-dimensional near-surface structure of a winter tornadic vortex using high-resolution in situ wind and pressure measurements

    Science.gov (United States)

    Kato, Ryohei; Kusunoki, Kenichi; Sato, Eiichi; Mashiko, Wataru; Inoue, Hanako Y.; Fujiwara, Chusei; Arai, Ken-ichiro; Nishihashi, Masahide; Saito, Sadao; Hayashi, Syugo; Suzuki, Hiroto

    2015-06-01

    The horizontal two-dimensional near-surface structure of a tornadic vortex within a winter storm was analyzed. The tornadic vortex was observed on 10 December 2012 by the high-resolution in situ observational linear array of wind and pressure sensors (LAWPS) system in conjunction with a high-resolution Doppler radar. The 0.1 s maximum wind speed and pressure deficit near the ground were recorded as 35.3 m s-1 and -3.8 hPa, respectively. The horizontal two-dimensional distributions of the tornadic vortex wind and pressure were retrieved by the LAWPS data, which provided unprecedented observational detail on the following important features of the near-surface structure of the tornadic vortex. Asymmetric convergent inflow toward the vortex center existed. Total wind speed was strong to the right and rear side of the translational direction of the vortex and weak in the forward part of the vortex possibly because of the strong convergent inflow in that region. The tangential wind speed profile of the vortex was better approximated using a modified Rankine vortex rather than the Rankine vortex both at 5 m above ground level (agl) and 100 m agl, and other vortex models (Burgers-Rott vortex and Wood-White vortex) were also compared. The cyclostrophic wind balance was violated in the core radius R0 and outside the core radius in the forward sector; however, it was held with a relatively high accuracy of approximately 14% outside the core of the vortex in the rearward sector (from 2 R0 to 5 R0) near the ground.

  2. Application of a quantitative structure retention relationship approach for the prediction of the two-dimensional gas chromatography retention times of polycyclic aromatic sulfur heterocycle compounds.

    Science.gov (United States)

    Gieleciak, Rafal; Hager, Darcy; Heshka, Nicole E

    2016-03-11

    Information on the sulfur classes present in petroleum is a key factor in determining the value of refined products and processing behavior in the refinery. A large part of the sulfur present is included in polycyclic aromatic sulfur heterocycles (PASHs), which in turn are difficult to desulfurize. Furthermore, some PASHs are potentially more mutagenic and carcinogenic than polycyclic aromatic hydrocarbons, PAHs. All of this calls for improved methods for the identification and quantification of individual sulfur species. Recent advances in analytical techniques such as comprehensive two-dimensional gas chromatography (GC×GC) have enabled the identification of many individual sulfur species. However, full identification of individual components, particularly in virgin oil fractions, is still out of reach as standards for numerous compounds are unavailable. In this work, a method for accurately predicting retention times in GC×GC using a QSRR (quantitative structure retention relationship) method was very helpful for the identification of individual sulfur compounds. Retention times for 89 saturated, aromatic, and polyaromatic sulfur-containing heterocyclic compounds were determined using two-dimensional gas chromatography. These retention data were correlated with molecular descriptors generated with CODESSA software. Two independent QSRR relationships were derived for the primary as well as the secondary retention characteristics. The predictive ability of the relationships was tested by using both independent sets of compounds and a cross-validation technique. When the corresponding chemical standards are unavailable, the equations developed for predicting retention times can be used to identify unknown chromatographic peaks by matching their retention times with those of sulfur compounds of known molecular structure.

  3. A Method to Formulate the Unit Cell for Density Functional Theory (DFT) Calculations of the Electronic Band Structure of Heterostructures of Two-dimensional Nanosheets

    Science.gov (United States)

    2015-04-01

    distribution is unlimited. i CONTENTS Page Introduction 1 Two-dimensional Material Geometry and Analogs with Close-packed Systems 1 Matching...distribution is unlimited. 1 INTRODUCTION Two-dimensional (2D) material heterostructures offer novel and compelling electronic and optical...methods have undoubtedly been created for matching lattice constants of dissimilar nanomaterials , very few are actually covered explicitly in literature

  4. New structural information on a humic acid from two-dimensional 1H-13C correlation solid-state nuclear magnetic resonance.

    Science.gov (United States)

    Mao, J D; Xing, B; Schmidt-Rohr, K

    2001-05-15

    New information on the chemical structure of a peat humic acid has been obtained using a series of two-dimensional 1H-13C heteronuclear correlation solid-state NMR (HETCOR) experiments with different contact times and with spectral editing by dipolar dephasing and 13C transverse relaxation filtering. Carbon-bonded methyl groups (C-CH3) are found to be near both aliphatic and O-alkyl but not aromatic groups. The spectra prove that most OCH3 groups are connected directly with the aromatic rings, as is typical in lignin. As a result, about one-third of the aromatic C-O groups is not phenolic C-OH but C-OCH3. Both protonated and unprotonated anomeric O-C-O carbons are identified in the one- and two-dimensional spectra. COO groups are found predominantly in OCHn-COO environments, but some are also bonded to aromatic rings and aliphatic groups. All models of humic acids in the literature lack at least some of the features observed here. Compositional heterogeneity was studied by introducing 1H spin diffusion into the HETCOR experiment. Comparison with data for a synthetic polymer, polycarbonate, indicates that the separation between O-alkyl and aromatic groups in the humic acid is less than 1.5 nm. However, transverse 13C relaxation filtering under 1H decoupling reveals heterogeneity on a nanometer scale, with the slow-relaxing component being rich in lignin-like aromatic-C-O-CH3 moieties and poor in COO groups.

  5. Design of an LED chip structure with an integrated two-dimensional photonic crystal to enhance the light-extraction efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Won-Sik; Park, Si-Hyun [Yeungnam University, Gyeongsan (Korea, Republic of)

    2014-05-15

    We numerically simulated the light-extraction efficiency of light-emitting diodes (LEDs) with an integrated two-dimensional photonic crystal (PC) structure on the top surface in order to enhance light extraction. We considered InGaN-based LED chips with a typical emission wavelength of λ{sub o} = 460 nm and an emission wavelength inside the LED chip of λ = λ{sub 0}/n{sub GaN} , where n{sub GaN} is the refractive index of GaN. We used positive (relief) and negative (intaglio) patterns for the PC structures with square arrangements. The pattern period (Λ), width (d), and height (h) of the PC structure were varied systematically in the PC-LEDs; then the light-extraction efficiency of each PC-LED was simulated numerically using a three-dimensional finite-difference time-domain method to optimize the PC structure in terms of light extraction. The PC LED with a square pillar pattern with Λ ∼ 1.4λ, d ∼ 0.75Λ, and h ∼ 0.75Λ had the maximum light-extraction efficiency for positive patterns while the cylindrical hole pattern with Λ ∼ 1.2λ, d ∼ 0.5Λ, and h ∼ 0.5Λ had the maximum light-extraction efficiency for negative patterns.

  6. Synthesis and Structure of A Novel Quasi-Two Dimensional Organic-inorganic Hybrid Coordination Polymer:{[Cu(en)2][Ag2I4]}n

    Institute of Scientific and Technical Information of China (English)

    SUN Ling-Guo; LI Hao-Hong; CHEN Zhi-Rong; HUANG Chang-Cang; ZHAO Bin; LI Jun-Qian

    2006-01-01

    A novel coordination polymer {[Cu(en)2][Ag2I4]}n (en = ethylenediamine) was synthesized by the reaction of NaAgI2 and Cu(en)2(NO3)2·2H2O at room temperature with pH = 6.0, and the structure was characterized by X-ray single-crystal diffraction. It crystallizes in monoclinic, space group C2/m, with a=10.646(2), b = 13.304(3), c = 6.8445(14)(A), β = 118.95(3)°, C4H16N4CuAg2I4, Mr = 907.10, V = 848.3(4)(A)3, Z = 2, Dc = 3.551 g/cm3, F(000) = 806, μ(MoKα) = 10.787 mm(1, the final R1 = 0.0256 and wR2 = 0.0654 for 900 observed reflections with I > 2σ(I). According to structural analysis, the title compound consists of template cation [Cu(en)2]2+ and inorganic chain [Ag2I4]n2-. The polymeric negative chain [Ag2I4]n2- is built up from pairs of AgI4 tetrahedron by sharing one edge. Through N-H…I hydrogen-bonding interactions, the whole structure represents a quasi-two dimensional arrangement. Electrostatic attraction exists between organic cations and inorganic chains, leading to a so-called organic-inorganic hybrid structure.

  7. Surface-plasmons lasing in double-graphene-layer structures

    Energy Technology Data Exchange (ETDEWEB)

    Dubinov, A. A. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Institute for Physics of Microstructures of Russian Academy of Sciences, and Lobachevsky State University of Nizhny Novgorod, Nizhny Novgorod 603950 (Russian Federation); Aleshkin, V. Ya. [Institute for Physics of Microstructures of Russian Academy of Sciences, and Lobachevsky State University of Nizhny Novgorod, Nizhny Novgorod 603950 (Russian Federation); Ryzhii, V. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Center for Photonics and Infrared Engineering, Bauman Moscow State Technical University, Moscow 105005 (Russian Federation); Shur, M. S. [Department of Electrical, Electronics, and System Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Otsuji, T. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan)

    2014-01-28

    We consider the concept of injection terahertz lasers based on double-graphene-layer (double-GL) structures with metal surface-plasmon waveguide and study the conditions of their operation. The laser under consideration exploits the resonant radiative transitions between GLs. This enables the double-GL laser room temperature operation and the possibility of voltage tuning of the emission spectrum. We compare the characteristics of the double-GL lasers with the metal surface-plasmon waveguides with those of such laser with the metal-metal waveguides.

  8. Investigation of nanogap localized field enhancement in gold plasmonic structures

    Science.gov (United States)

    Debu, Desalegn Tadesse; Bauman, Stephen; Saylor, Cameron; Novak, Eric; French, David; Herzog, Joseph

    2015-03-01

    Nanogaps between plasmonic structures allow confining the localized electric field with moreenhancements. Based on previously implemented two-step lithography process, we introducea nano-masking technique to fabricate nanostructrues and nanogaps for various geometrical patterns. This new method can fabricate gold nanostructures as well as nanogaps that are less than 10nm, below the limiting scale of lithography. Simulation from finite element method (FEM) shows strong gap dependence of optical properties and peak enhancement of these devices. The fabricated plasmonic nanostructure provides wide range of potential future application including highly sensitive optical antenna, surface enhanced Raman spectroscopy and biosensing.

  9. Crystal structure and photoluminescence of a new two-dimensional Cd(II) coordination polymer based on 3-(carboxymethoxy)-2-naphthoic acid

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Zhi-Guo; Guo, Sheng-Nan; Miao, Jia-Qi; An, Miao [Jilin Normal Univ., College of Chemistry, Siping (China); Ministry of Education, Siping (China). Key Lab. of Preparation and Applications of Enviromental Friendly Materials

    2015-11-01

    A new Cd(II) coordination polymer, [Cd(CNA)]{sub n} (1) (H{sub 2}CNA = 3-(carboxymethoxy)-2-naphthoic acid), was hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. The crystals are monoclinic, space group P{sub 2}1/c with a = 16.9698(18), b = 7.8314(8), c = 8.9553(10) Aa, β = 100.657(2) {sup circle}, V = 1169.6(2) Aa{sup 3}, Z = 4, D{sub calcd.} = 2.03 g cm{sup -3}, μ(MoK{sub α}) = 1.9 mm{sup -1}, F(000) = 696 e, R = 0.0305, wR = 0.0784 for 172 refined parameters and 2285 data. Each CNA anion bridges three Cd(II) cations to give rise to a two-dimensional network structure. Topologically, if each CNA anion is regarded as a linker, and each Cd(II) atom considered as a 4-connected node, the structure is simplified as a 4-connected (4,4) network. The solid state photoluminescent properties of the compound were also studied at room temperature.

  10. On-Surface Synthesis of Two-Dimensional Covalent Organic Structures versus Halogen-Bonded Self-Assembly: Competing Formation of Organic Nanoarchitectures.

    Science.gov (United States)

    Peyrot, David; Silly, Fabien

    2016-05-24

    The competition between the on-surface synthesis of covalent nanoarchitectures and the self-assembly of star-shaped 1,3,5-Tris(4-iodophenyl)benzene molecules on Au(111) in vacuum is investigated using scanning tunneling microscopy above room temperature. The molecules form covalent polygonal nanoachitectures at the gold surface step edges and at the elbows of the gold reconstruction at low coverage. With coverage increasing two-dimensional halogen-bonded structures appear and grow on the surface terraces. Two different halogen-bonded nanoarchitectures are coexisting on the surface and hybrid covalent-halogen bonded structures are locally observed. At high coverage covalent nanoarchitectures are squeezed at the domain boundary of the halogen-bonded structures. The competitive growth between the covalent and halogen-bonded nanoarchitectures leads to formation of a two-layer film above one monolayer deposition. For this coverage, the covalent nanoarchitectures are propelled on top of the halogen-bonded first layer. These observations open up new opportunities for decoupling covalent nanoarchitectures from catalytically active and metal surfaces in vacuum.

  11. Visualization of Excitonic Structure in the Fenna-Matthews-OlsonPhotosynthetic Complex by Polarization-Dependent Two-DimensionalElectronic Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Department of Chemistry, The University of Chicago; Department of Biology, Department of Chemistry, Washington University; Fleming, Graham; Read, Elizabeth L.; Schlau-Cohen, Gabriela S.; Engel, Gregory S.; Wen, Jianzhong; Blankenship, Robert E.; Fleming, Graham R.

    2008-05-26

    Photosynthetic light-harvesting proceeds by the collection and highly efficient transfer of energy through a network of pigment-protein complexes. Inter-chromophore electronic couplings and interactions between pigments and the surrounding protein determine energy levels of excitonic states and dictate the mechanism of energy flow. The excitonic structure (orientation of excitonic transition dipoles) of pigment-protein complexes is generally deduced indirectly from x-ray crystallography in combination with predictions of transition energies and couplings in the chromophore site basis. Here, we demonstrate that coarse-grained excitonic structural information in the form of projection angles between transition dipole moments can be obtained from polarization-dependent two-dimensional electronic spectroscopy of an isotropic sample, particularly when the nonrephasing or free polarization decay signal rather than the photon echo signal is considered. The method provides an experimental link between atomic and electronic structure and accesses dynamical information with femtosecond time resolution. In an investigation of the Fenna-Matthews-Olson complex from green sulfur bacteria, energy transfer connecting two particular exciton states in the protein is isolated as being the primary contributor to a cross peak in the nonrephasing 2D spectrum at 400 fs under a specific sequence of polarized excitation pulses. The results suggest the possibility of designing experiments using combinations of tailored polarization sequencesto separate and monitor individual relaxation pathways.

  12. Visualization of Excitonic Structure in the Fenna-Matthews-OlsonPhotosynthetic Complex by Polarization-Dependent Two-DimensionalElectronic Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Department of Chemistry, The University of Chicago; Department of Biology, Department of Chemistry, Washington University; Fleming, Graham; Read, Elizabeth L.; Schlau-Cohen, Gabriela S.; Engel, Gregory S.; Wen, Jianzhong; Blankenship, Robert E.; Fleming, Graham R.

    2008-05-26

    Photosynthetic light-harvesting proceeds by the collection and highly efficient transfer of energy through a network of pigment-protein complexes. Inter-chromophore electronic couplings and interactions between pigments and the surrounding protein determine energy levels of excitonic states and dictate the mechanism of energy flow. The excitonic structure (orientation of excitonic transition dipoles) of pigment-protein complexes is generally deduced indirectly from x-ray crystallography in combination with predictions of transition energies and couplings in the chromophore site basis. Here, we demonstrate that coarse-grained excitonic structural information in the form of projection angles between transition dipole moments can be obtained from polarization-dependent two-dimensional electronic spectroscopy of an isotropic sample, particularly when the nonrephasing or free polarization decay signal rather than the photon echo signal is considered. The method provides an experimental link between atomic and electronic structure and accesses dynamical information with femtosecond time resolution. In an investigation of the Fenna-Matthews-Olson complex from green sulfur bacteria, energy transfer connecting two particular exciton states in the protein is isolated as being the primary contributor to a cross peak in the nonrephasing 2D spectrum at 400 fs under a specific sequence of polarized excitation pulses. The results suggest the possibility of designing experiments using combinations of tailored polarization sequencesto separate and monitor individual relaxation pathways.

  13. A matrix-exponential decomposition based time-domain method for calculating the defect states of scalar waves in two-dimensional periodic structures

    Science.gov (United States)

    Su, Xiao-Xing; Wang, Yue-Sheng; Zhang, Chuanzeng

    2017-05-01

    A time-domain method for calculating the defect states of scalar waves in two-dimensional (2D) periodic structures is proposed. In the time-stepping process of the proposed method, the column vector containing the spatially sampled field values is updated by multiplying it with an iteration matrix, which is written in a matrix-exponential form. The matrix-exponential is first computed by using the Suzuki's decomposition based technique of the fourth order, in which the Floquet-Bloch boundary conditions are incorporated. The obtained iteration matrix is then squared to enlarge the time-step that can be used in the time-stepping process (namely, the squaring technique), and the small nonzero elements in the iteration matrix is finally pruned to improve the sparse structure of the matrix (namely, the pruning technique). The numerical examples of the super-cell calculations for 2D defect-containing phononic crystal structures show that, the fourth order decomposition based technique for the matrix-exponential computation is much more efficient than the frequently used precise integration technique (PIT) if the PIT is of an order greater than 2. Although it is not unconditionally stable, the proposed time-domain method is particularly efficient for the super-cell calculations of the defect states in a 2D periodic structure containing a defect with a wave speed much higher than those of the background materials. For this kind of defect-containing structures, the time-stepping process can run stably for a sufficiently large number of the time-steps with a time-step much larger than the Courant-Friedrichs-Lewy (CFL) upper limit, and consequently the overall efficiency of the proposed time-domain method can be significantly higher than that of the conventional finite-difference time-domain (FDTD) method. Some physical interpretations on the properties of the band structures and the defect states of the calculated periodic structures are also presented.

  14. Two-dimensional incommensurately modulated structure of (Sr0.13Ca0. 87)2CoSi2O7 crystals.

    Science.gov (United States)

    Bagautdinov, B; Hagiya, K; Kusaka, K; Ohmasa, M; Iishi, K

    2000-10-01

    The incommensurate structure of (Sr(0.13)Ca(0.87))(2)CoSi(2)O(7) at room temperature has been determined from single-crystal X-ray diffraction data. The compound has a non-centrosymmetric tetragonal basic cell of a = 7.8743 (4) and c = 5.0417 (2) A with the space group P4;2(1)m. The refinements of the basic structure converged to R = 0.038 for 757 main reflections. The two-dimensional incommensurate structure is characterized by the wavevectors q(1) = 0.286 (3)(a* + b*) and q(2) = 0.286 (3)(-a* + b*), where a*, b* are the reciprocal lattice vectors of the basic structure. With the (3 + 2)-dimensional superspace group P(p4mg)(P4;2(1)(m)), the refinements converged to R = 0.071 for 1697 observed reflections (757 main and 940 satellite reflections). The structure is described in terms of displacement of the atoms, rotation, distortion of CoO(4) and SiO(4) tetrahedra, and the partial ordering of the Sr and Ca atoms accompanied with the modulation. Correlated evolution of these features throughout the crystal gives rise to various oxygen coordination around Ca/Sr. Comparison of the derived modulated structure to that of Ca(2)CoSi(2)O(7) clarified that the partial substitution of Ca by large alkaline-earth atoms such as Sr should decrease the distortion of the polyhedra around the cations.

  15. Analyzing the photonic band gaps in two-dimensional plasma photonic crystals with fractal Sierpinski gasket structure based on the Monte Carlo method

    Directory of Open Access Journals (Sweden)

    Hai-Feng Zhang

    2016-08-01

    Full Text Available In this paper, the properties of photonic band gaps (PBGs in two types of two-dimensional plasma-dielectric photonic crystals (2D PPCs under a transverse-magnetic (TM wave are theoretically investigated by a modified plane wave expansion (PWE method where Monte Carlo method is introduced. The proposed PWE method can be used to calculate the band structures of 2D PPCs which possess arbitrary-shaped filler and any lattice. The efficiency and convergence of the present method are discussed by a numerical example. The configuration of 2D PPCs is the square lattices with fractal Sierpinski gasket structure whose constituents are homogeneous and isotropic. The type-1 PPCs is filled with the dielectric cylinders in the plasma background, while its complementary structure is called type-2 PPCs, in which plasma cylinders behave as the fillers in the dielectric background. The calculated results reveal that the enough accuracy and good convergence can be obtained, if the number of random sampling points of Monte Carlo method is large enough. The band structures of two types of PPCs with different fractal orders of Sierpinski gasket structure also are theoretically computed for a comparison. It is demonstrate that the PBGs in higher frequency region are more easily produced in the type-1 PPCs rather than in the type-2 PPCs. Sierpinski gasket structure introduced in the 2D PPCs leads to a larger cutoff frequency, enhances and induces more PBGs in high frequency region. The effects of configurational parameters of two types of PPCs on the PBGs are also investigated in detail. The results show that the PBGs of the PPCs can be easily manipulated by tuning those parameters. The present type-1 PPCs are more suitable to design the tunable compacted devices.

  16. Analyzing the photonic band gaps in two-dimensional plasma photonic crystals with fractal Sierpinski gasket structure based on the Monte Carlo method

    Science.gov (United States)

    Zhang, Hai-Feng; Liu, Shao-Bin

    2016-08-01

    In this paper, the properties of photonic band gaps (PBGs) in two types of two-dimensional plasma-dielectric photonic crystals (2D PPCs) under a transverse-magnetic (TM) wave are theoretically investigated by a modified plane wave expansion (PWE) method where Monte Carlo method is introduced. The proposed PWE method can be used to calculate the band structures of 2D PPCs which possess arbitrary-shaped filler and any lattice. The efficiency and convergence of the present method are discussed by a numerical example. The configuration of 2D PPCs is the square lattices with fractal Sierpinski gasket structure whose constituents are homogeneous and isotropic. The type-1 PPCs is filled with the dielectric cylinders in the plasma background, while its complementary structure is called type-2 PPCs, in which plasma cylinders behave as the fillers in the dielectric background. The calculated results reveal that the enough accuracy and good convergence can be obtained, if the number of random sampling points of Monte Carlo method is large enough. The band structures of two types of PPCs with different fractal orders of Sierpinski gasket structure also are theoretically computed for a comparison. It is demonstrate that the PBGs in higher frequency region are more easily produced in the type-1 PPCs rather than in the type-2 PPCs. Sierpinski gasket structure introduced in the 2D PPCs leads to a larger cutoff frequency, enhances and induces more PBGs in high frequency region. The effects of configurational parameters of two types of PPCs on the PBGs are also investigated in detail. The results show that the PBGs of the PPCs can be easily manipulated by tuning those parameters. The present type-1 PPCs are more suitable to design the tunable compacted devices.

  17. Comprehensive magnetotransport characterization of two dimensional electron gas in AlGaN/GaN high electron mobility transistor structures leading to the assessment of interface roughness

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, Manna Kumari [Solid State Physics Laboratory, Lucknow Road, Timarpur, Delhi-110054 (India); Netaji Subhas Institute of Technology, Dwarka, New Delhi-110078 (India); Sharma, Rajesh K., E-mail: rksharma@sspl.drdo.in; Manchanda, Rachna; Bag, Rajesh K.; Muralidharan, Rangarajan [Solid State Physics Laboratory, Lucknow Road, Timarpur, Delhi-110054 (India); Thakur, Om Prakash [Netaji Subhas Institute of Technology, Dwarka, New Delhi-110078 (India)

    2014-09-15

    Magnetotransport in two distinct AlGaN/GaN HEMT structures grown by Molecular Beam Epitaxy (MBE) on Fe-doped templates is investigated using Shubnikov de-Haas Oscillations in the temperature range of 1.8–6 K and multicarrier fitting in the temperature range of 1.8–300 K. The temperature dependence of the two dimensional electron gas mobility is extracted from simultaneous multicarrier fitting of transverse and longitudinal resistivity as a function of magnetic field and the data is utilized to estimate contribution of interface roughness to the mobility and the corresponding transport lifetime. The quantum scattering time obtained from the analysis of Shubnikov de Haas Oscillations in transverse magnetoresistance along with the transport lifetime time were used to estimate interface roughness amplitude and lateral correlation length. The results indicate that the insertion of AlN over layer deposited prior to the growth of GaN base layer on Fe doped GaN templates for forming HEMT structures reduced the parallel conduction but resulted in an increase in interface roughness.

  18. Comprehensive magnetotransport characterization of two dimensional electron gas in AlGaN/GaN high electron mobility transistor structures leading to the assessment of interface roughness

    Directory of Open Access Journals (Sweden)

    Manna Kumari Mishra

    2014-09-01

    Full Text Available Magnetotransport in two distinct AlGaN/GaN HEMT structures grown by Molecular Beam Epitaxy (MBE on Fe-doped templates is investigated using Shubnikov de-Haas Oscillations in the temperature range of 1.8–6 K and multicarrier fitting in the temperature range of 1.8–300 K. The temperature dependence of the two dimensional electron gas mobility is extracted from simultaneous multicarrier fitting of transverse and longitudinal resistivity as a function of magnetic field and the data is utilized to estimate contribution of interface roughness to the mobility and the corresponding transport lifetime. The quantum scattering time obtained from the analysis of Shubnikov de Haas Oscillations in transverse magnetoresistance along with the transport lifetime time were used to estimate interface roughness amplitude and lateral correlation length. The results indicate that the insertion of AlN over layer deposited prior to the growth of GaN base layer on Fe doped GaN templates for forming HEMT structures reduced the parallel conduction but resulted in an increase in interface roughness.

  19. Generation of eye field/optic vesicle-like structures from human embryonic stem cells under two-dimensional and chemically defined conditions.

    Science.gov (United States)

    Parvini, Maryam; Parivar, Kazem; Safari, Fatemeh; Tondar, Mahdi

    2015-03-01

    Despite the enormous progress in studying retinal cell differentiation from human embryonic stem cells (hESCs), none of the reported protocols have produced a cost-effective eye field cells with the capability to further differentiate into retinal derivatives. In this study, by drawing chemicals on our four-step differentiation strategy, we demonstrated the ability of hESCs in assembling such qualifications to follow human retinogenesis in a serum- and feeder-free adherent condition. Two-dimensional (2D) populations of eye field cells arose within early forebrain progeny upon hESCs differentiation. Gene expression analysis showed that the treatment of hESCs with a combination of selected small molecules (SMs) gave rise to the higher expressions of eye field-specific genes, PAX6, RX, and SIX3. Thereafter, a subset of cells gained the transient features of advancing retinal differentiation, including optic vesicle (OV)-like structures, which expressed MITF and CHX10 in a manner imitated in vivo human retinal development. The competency of derived cells in differentiation to retinal derivatives was further investigated. The gene analysis of the cells showed more propensity for generating retinal pigment epithelial (RPE) than neural retina (NR). The generation of OV-like structures in 2D cultures can shed light on molecular events governing retinal specification. It can also facilitate the study of human retinal development.

  20. Synthesis, crystal structure, vibrational spectra, optical properties and theoretical investigation of a two-dimensional self-assembled organic-inorganic hybrid material

    Science.gov (United States)

    Dammak, Hajer; Elleuch, Slim; Feki, Habib; Abid, Younes

    2016-11-01

    Organic-inorganic hybrid material of formula (C4H3SC2H4NH3)2[PbI4] was synthesized and studied by X-ray diffraction, Infrared absorption, Raman scattering, UV-Visible absorption and photoluminescence measurements. The molecule crystallizes as an organic-inorganic two-dimensional (2D) structure built up from infinite PbI6 octahedra surrounded by organic cations. Such a structure may be regarded as quantum wells system in which the inorganic layers act as semiconductor wells and the organic cations act as insulator barriers. Room temperature IR and Raman spectra were recorded in the 520-3500 and 10-3500 cm-1 frequency range, respectively. Optical absorption measurements performed on thin films of (C4H3SC2H4NH3)2[PbI4] revealed three distinct bands at 2.4, 2.66 and 3.25 eV. We also report DFT calculations of the electric dipole moments (μ), polarizability (α), the static first hyperpolarizability (β) and HOMO-LUMO analysis of the title compound investigated by GAUSSIAN 09 package. The calculated static first Hyperpolarizability is equal to 11.46 × 10-31 esu.

  1. Identifying important structural features of ionic liquid stationary phases for the selective separation of nonpolar analytes by comprehensive two-dimensional gas chromatography.

    Science.gov (United States)

    Zhang, Cheng; Ingram, Isaiah C; Hantao, Leandro W; Anderson, Jared L

    2015-03-20

    A series of dicationic ionic liquid (IL)-based stationary phases were evaluated as secondary columns in comprehensive two-dimensional gas chromatography (GC×GC) for the separation of aliphatic hydrocarbons from kerosene. In order to understand the role that structural features of ILs play on the selectivity of nonpolar analytes, the solvation parameter model was used to probe the solvation properties of the IL-based stationary phases. It was observed that room temperature ILs containing long free alkyl side chain substituents and long linker chains between the two cations possess less cohesive forces and exhibited the highest resolution of aliphatic hydrocarbons. The anion component of the IL did not contribute significantly to the overall separation, as similar selectivities toward aliphatic hydrocarbons were observed when examining ILs with identical cations and different anions. In an attempt to further examine the separation capabilities of the IL-based GC stationary phases, columns of the best performing stationary phases were prepared with higher film thickness and resulted in enhanced selectivity of aliphatic hydrocarbons.

  2. Crystal Structure and Magnetic Property of a Two-dimensional Manganese Compound [Mn(PhCOO)2(4,4'-bipyridine)]n

    Institute of Scientific and Technical Information of China (English)

    CHEN Hui; WANG Wen-Guo; MA Cheng-Bing; CHEN Chang-Neng; LIU Qiu-Tian; LIAO Dai-Zheng; LI Li-Cun

    2007-01-01

    A new two-dimensional polymeric manganese compound [Mn(PhCOO)2(4,4'-bipyridine)]n 1 has been prepared and structurally characterized by X-ray diffraction. The complex crystallizes in space group Pbcn with a = 18.7158(2), b = 11.6919(3), c = 9.4799(2)(A), V = 2074.42(7)(A)3, Z = 4, Mr = 453.34, Dc = 1.452 g/cm3, μ = 0.670 mm-1 and F(000) = 932. The final refinement gave R = 0.0458 and wR = 0.1439 for 1358 observed reflections with Ⅰ> 2σ(Ⅰ). The complex consists of repeating units of Mn(PhCOO)2(4,4'-bipyridine). Each Mn center is sixcoordinated by four carboxylate O atoms of four benzoate anions and two pyridyl N atoms from bipy ligands to furnish a slightly distorted octahedral geometry. The two adjacent Mn atoms are connected by a pair of μ1,3-carboxylate groups to form infinite chains, which are further interlinked by bipy to complete a 2D grid network. The magnetic property of the polymeric complex has also been investigated.

  3. High-pressure crystal structure of the non-linear optical compound BiB(3)O(6) from two-dimensional powder diffraction data.

    Science.gov (United States)

    Dinnebier, R E; Hinrichsen, B; Lennie, A; Jansen, M

    2009-02-01

    Our recently proposed method for automatic detection, calibration and evaluation of Debye-Scherrer ellipses using pattern-recognition techniques and advanced signal filtering was applied to the two-dimensional powder diffraction data of the non-ferroelectric, non-centrosymmetric non-linear optical (NLO) compound alpha-BiB(3)O(6) as a function of pressure. At ambient conditions, alpha-BiB(3)O(6) crystallizes in the space group C2 (phase I). In the pressure range between P = 6.09 and 6.86 GPa, it exhibits a first-order phase transition into a structure with the space group C1 (P1) [phase II at P = 8.34 GPa: a = 7.4781 (6), b = 3.9340 (4), c = 6.2321 (6) A, alpha = 93.73 (1), beta = 102.93 (1), gamma = 90.76 (1) degrees , and V = 178.24 (3) A(3)]. Non-linear compression behaviour over the entire pressure range is observed, which can be described by two Vinet relations in the ranges from P = 0.0 to 6.09 GPa, and from P = 6.86 to 11.6 GPa. The extrapolated bulk moduli of the high-pressure phases were determined to be K(0) = 38 (1) GPa for phase I, and K(0) = 114 (10) GPa for phase II. The crystal structures of both phases were refined against X-ray powder diffraction data measured at several pressures between 0.0 and 11.6 GPa. The structural phase transition of alpha-BiB(3)O(6) is mainly characterized by a reorientation of the [BO(3)](3-) triangles, the [BO(4)](5-) tetrahedra and the lone electron pair which is localized at Bi(3+), in order to optimize crystal packing.

  4. Study on Dielectric Function Models for Surface Plasmon Resonance Structure

    Directory of Open Access Journals (Sweden)

    Peyman Jahanshahi

    2014-01-01

    Full Text Available The most common permittivity function models are compared and identifying the best model for further studies is desired. For this study, simulations using several different models and an analytical analysis on a practical surface Plasmon structure were done with an accuracy of ∼94.4% with respect to experimental data. Finite element method, combined with dielectric properties extracted from the Brendel-Bormann function model, was utilized, the latter being chosen from a comparative study on four available models.

  5. Guiding of Plasmons and Phonons in Complex Three Dimensional Structures

    Science.gov (United States)

    2013-01-01

    photovoltaic conversion efficiency of copper phthalocyanine thin film devices by incorporation of metal clusters. Solar Energy Materials and Solar Cells 37...Atwater, H. A. & Polman, A. Plasmonics for improved photovoltaic devices (vol 9, pg 205, 2010). Nat Mater 9, 865-865 (2010). 59 Tegart, W. J., The...108 The corresponding porosity of the inverse opal structure is 1-86%*(1-0.74)=78% 109 King, J. S., Graugnard, E. & Summers, C. J. TiO2 Inverse

  6. Crosslinked structurally-tuned polymeric ionic liquids as stationary phases for the analysis of hydrocarbons in kerosene and diesel fuels by comprehensive two-dimensional gas chromatography.

    Science.gov (United States)

    Zhang, Cheng; Park, Rodney A; Anderson, Jared L

    2016-04-01

    Structurally-tuned ionic liquids (ILs) have been previously applied as the second dimension column in comprehensive two-dimensional gas chromatography (GC×GC) and have demonstrated high selectivity in the separation of individual aliphatic hydrocarbons from other aliphatic hydrocarbons. However, the maximum operating temperatures of these stationary phases limit the separation of analytes with high boiling points. In order to address this issue, a series of polymeric ionic liquid (PIL)-based stationary phases were prepared in this study using imidazolium-based IL monomers via in-column free radical polymerization. The IL monomers were functionalized with long alkyl chain substituents to provide the needed selectivity for the separation of aliphatic hydrocarbons. Columns were prepared with different film thicknesses to identify the best performing stationary phase for the separation of kerosene. The bis[(trifluoromethyl)sulfonyl]imide ([NTf2](-))-based PIL stationary phase with larger film thickness (0.28μm) exhibited higher selectivity for aliphatic hydrocarbons and showed a maximum allowable operating temperature of 300°C. PIL-based stationary phases containing varied amount of IL-based crosslinker were prepared to study the effect of the crosslinker on the selectivity and thermal stability of the resulting stationary phase. The optimal resolution of aliphatic hydrocarbons was achieved when 50% (w/w) of crosslinker was incorporated into the PIL-based stationary phase. The resulting stationary phase exhibited good selectivity for different groups of aliphatic hydrocarbons even after being conditioned at 325°C. Finally, the crosslinked PIL-based stationary phase was compared with SUPELCOWAX 10 and DB-17 columns for the separation of aliphatic hydrocarbons in diesel fuel. Better resolution of aliphatic hydrocarbons was obtained when employing the crosslinked PIL-based stationary phase as the second dimension column.

  7. Complete photonic band gaps and tunable self-collimation in the two-dimensional plasma photonic crystals with a new structure

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hai-Feng, E-mail: hanlor@163.com [Key Laboratory of Radar Imaging and Microwave Photonics (Nanjing University of Aeronautics and Astronautics), Ministry of Education, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Nanjing Artillery Academy, Nanjing 211132 (China); Ding, Guo-Wen; Li, Hai-Ming; Liu, Shao-Bin [Key Laboratory of Radar Imaging and Microwave Photonics (Nanjing University of Aeronautics and Astronautics), Ministry of Education, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China)

    2015-02-15

    In this paper, the properties of complete photonic band gaps (CPBGs) and tunable self-collimation in two-dimensional plasma photonic crystals (2D PPCs) with a new structure in square lattices, whose dielectric fillers (GaAs) are inserted into homogeneous and nomagnetized plasma background are theoretically investigated by a modified plane wave expansion (PWE) method with a novel technique. The novel PWE method can be utilized to compute the dispersion curves of 2D PPCs with arbitrary-shaped cross section in any lattices. As a comparison, CPBGs of PPCs for four different configurations are numerically calculated. The computed results show that the proposed design has the advantages of achieving the larger CPBGs compared to the other three configurations. The influences of geometric parameters of filled unit cell and plasma frequency on the properties of CPBGs are studied in detail. The calculated results demonstrate that CPBGs of the proposed 2D PPCs can be easily engineered by changing those parameters, and the larger CPBGs also can be obtained by optimization. The self-collimation in such 2D PPCs also is discussed in theory under TM wave. The theoretical simulations reveal that the self-collimation phenomena can be found in the TM bands, and both the frequency range of self-collimation and the equifrequency surface contours can be tuned by the parameters as mentioned above. It means that the frequency range and direction of electromagnetic wave can be manipulated by designing, as it propagates in the proposed PPCs without diffraction. Those results can hold promise for designing the tunable applications based on the proposed PPCs.

  8. Energetic, spatial, and momentum character of the electronic structure at a buried interface: The two-dimensional electron gas between two metal oxides

    Science.gov (United States)

    Nemšák, S.; Conti, G.; Gray, A. X.; Palsson, G. K.; Conlon, C.; Eiteneer, D.; Keqi, A.; Rattanachata, A.; Saw, A. Y.; Bostwick, A.; Moreschini, L.; Rotenberg, E.; Strocov, V. N.; Kobayashi, M.; Schmitt, T.; Stolte, W.; Ueda, S.; Kobayashi, K.; Gloskovskii, A.; Drube, W.; Jackson, C. A.; Moetakef, P.; Janotti, A.; Bjaalie, L.; Himmetoglu, B.; Van de Walle, C. G.; Borek, S.; Minar, J.; Braun, J.; Ebert, H.; Plucinski, L.; Kortright, J. B.; Schneider, C. M.; Balents, L.; de Groot, F. M. F.; Stemmer, S.; Fadley, C. S.

    2016-06-01

    The interfaces between two condensed phases often exhibit emergent physical properties that can lead to new physics and novel device applications and are the subject of intense study in many disciplines. We here apply experimental and theoretical techniques to the characterization of one such interesting interface system: the two-dimensional electron gas (2DEG) formed in multilayers consisting of SrTi O3 (STO) and GdTi O3 (GTO). This system has been the subject of multiple studies recently and shown to exhibit very high carrier charge densities and ferromagnetic effects, among other intriguing properties. We have studied a 2DEG-forming multilayer of the form [6unit cells (u .c .) STO /3 u .c .of GTO ] 20 using a unique array of photoemission techniques including soft and hard x-ray excitation, soft x-ray angle-resolved photoemission, core-level spectroscopy, resonant excitation, and standing-wave effects, as well as theoretical calculations of the electronic structure at several levels and of the actual photoemission process. Standing-wave measurements below and above a strong resonance have been exploited as a powerful method for studying the 2DEG depth distribution. We have thus characterized the spatial and momentum properties of this 2DEG in detail, determining via depth-distribution measurements that it is spread throughout the 6 u.c. layer of STO and measuring the momentum dispersion of its states. The experimental results are supported in several ways by theory, leading to a much more complete picture of the nature of this 2DEG and suggesting that oxygen vacancies are not the origin of it. Similar multitechnique photoemission studies of such states at buried interfaces, combined with comparable theory, will be a very fruitful future approach for exploring and modifying the fascinating world of buried-interface physics and chemistry.

  9. Formation of a protocluster: A virialized structure from gravoturbulent collapse. II. A two-dimensional analytical model for a rotating and accreting system

    Science.gov (United States)

    Lee, Yueh-Ning; Hennebelle, Patrick

    2016-06-01

    Context. Most stars are born in the gaseous protocluster environment where the gas is reprocessed after the global collapse from the diffuse molecular cloud. The knowledge of this intermediate step gives more accurate constraints on star formation characteristics. Aims: We demonstrate that a virialized globally supported structure, in which star formation happens, is formed out of a collapsing molecular cloud, and we derive a mapping from the parent cloud parameters to the protocluster to predict its properties with a view to confront analytical calculations with observations and simulations. Methods: We decomposed the virial theorem into two dimensions to account for the rotation and the flattened geometry. Equilibrium was found by balancing rotation, turbulence, and self-gravity, while turbulence was maintained through accretion driving and it dissipates in one crossing time. We estimated the angular momentum and the accretion rate of the protocluster from the parent cloud properties. Results: The two-dimensional virial model predicts the size and velocity dispersion given the mass of the protocluster and that of the parent cloud. The gaseous protoclusters lie on a sequence of equilibrium with the trend R ~ M0.5 with limited variations, depending on the evolutionary stage, parent cloud, and parameters that are not well known, such as turbulence driving efficiency by accretion and turbulence anisotropy. The model reproduces observations and simulation results successfully. Conclusions: The properties of protoclusters follow universal relations and they can be derived from that of the parent cloud. The gaseous protocluster is an important primary stage of stellar cluster formation, and should be taken into account when studying star formation. Using simple estimates to infer the peak position of the core mass function (CMF) we find a weak dependence on the cluster mass, suggesting that the physical conditions inside protoclusters may contribute to set a CMF, and by

  10. High-resolution structural studies of ultra-thin magnetic, transition metal overlayers and two-dimensional transition metal oxides using synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kellar, S.A. [Univ. of California, Berkeley, CA (United States). Dept. of Chemistry]|[Lawrence Berkeley National Lab., CA (United States). Advanced Light Source Div.

    1997-05-01

    This thesis report the surface-structure determination of three, ultra-thin magnetic transition-metal films, Fe/Au(100), Mn/Ni(100), and Mn/Cu(100) using Angle-Resolved Photoemission Extended Fine Structure (ARPEFS) and photoelectron holography. These structural studies are the first to use non-s initial states in the ARPEFS procedure. This thesis also reports an ARPEFS surface-structure determination of a two-dimensional transition-metal oxide, [(1 x 1)O/W(110)] x 12. The authors have analyzed the ARPFES signal from the Au 4f{sub 7/5} core level of the Au(1 ML)/Fe(15 ML)/Au(100) system. The analysis shows that the Fe grows layer by layer with one monolayer of gold, acting as a surfactant, remaining on top of the growing Fe layers. These surface gold atoms sit in the four-fold hollow site, 1.67 {+-} 0.02 A above the iron surface. The grown Fe layer is very much like the bulk, bcc iron, with an interlayer spacing of 1.43 {+-} 0.03 A. Analysis of the Mn 3p ARPEFS signals from c(2 x 2)Mn/Ni(100) and c(2 x 2)Mn/Cu(100) shows that the Mn forms highly corrugated surface alloys. The corrugation of the Mn/Ni(100) and Mn/Cu(100) systems are 0.24 {+-} 0.02 A and 0.30 {+-} 0.04 A respectively. In both cases the Mn is sticking above the plane of the surface substrate atoms. For the Mn/Ni(100) system the first layer Ni is contracted 4% from the bulk value. The Mn/Cu(100) system shows bulk spacing for the substrate Cu. Photoelectron holography shows that the Mn/Ni interface is very abrupt with very little Mn leaking into the second layer, while the Mn/Cu(100) case has a significant amount of Mn leaking into the second layer. A new, five-element electrostatic electron lens was developed for hemispherical electron-energy analyzers. This lens system can be operated at constant transverse or constants angular magnification, and has been optimized for use with the very small photon-spot sizes. Improvements to the hemispherical electron-energy analyzer are also discussed.

  11. Infrared Topological Plasmons in Graphene

    Science.gov (United States)

    Jin, Dafei; Christensen, Thomas; Soljačić, Marin; Fang, Nicholas X.; Lu, Ling; Zhang, Xiang

    2017-06-01

    We propose a two-dimensional plasmonic platform—periodically patterned monolayer graphene—which hosts topological one-way edge states operable up to infrared frequencies. We classify the band topology of this plasmonic system under time-reversal-symmetry breaking induced by a static magnetic field. At finite doping, the system supports topologically nontrivial band gaps with mid-gap frequencies up to tens of terahertz. By the bulk-edge correspondence, these band gaps host topologically protected one-way edge plasmons, which are immune to backscattering from structural defects and subject only to intrinsic material and radiation loss. Our findings reveal a promising approach to engineer topologically robust chiral plasmonic devices and demonstrate a realistic example of high-frequency topological edge states.

  12. Surface plasmon polariton amplification in semiconductor-graphene-dielectric structure

    Energy Technology Data Exchange (ETDEWEB)

    Dadoenkova, Yuliya S. [Ulyanovsk State University, Ulyanovsk (Russian Federation); Novgorod State University, Veliky Novgorod (Russian Federation); Donetsk Institute for Physics and Technology, Donetsk (Ukraine); Moiseev, Sergey G. [Ulyanovsk State University, Ulyanovsk (Russian Federation); Kotelnikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences, Ulyanovsk (Russian Federation); Abramov, Aleksei S. [Ulyanovsk State University, Ulyanovsk (Russian Federation); Kadochkin, Aleksei S.; Zolotovskii, Igor O. [Ulyanovsk State University, Ulyanovsk (Russian Federation); Institute of Nanotechnologies of Microelectronics of the Russian Academy of Sciences, 32A Leninskiy Prosp., 119991, Moscow (Russian Federation); Fotiadi, Andrei A. [Ulyanovsk State University, Ulyanovsk (Russian Federation); Universite de Mons (Belgium)

    2017-05-15

    A mechanism of amplification of surface plasmon polaritons due to the transfer of electromagnetic energy from a drift current wave into a far-infrared surface wave propagating along a semiconductor-dielectric boundary in waveguide geometry is proposed. A necessary condition of the interaction of these waves is phase matching condition, i. e., when the phase velocity of the surface wave approaches the drift velocity of charge carriers. It is shown that in the spectral region of the surface plasmon polariton slowing-down its amplification coefficient can reach values substantially exceeding the ohmic loss coefficient of the surface wave in the structure. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Two-dimensional liquid chromatography

    DEFF Research Database (Denmark)

    Græsbøll, Rune

    of this thesis is on online comprehensive two-dimensional liquid chromatography (online LC×LC) with reverse phase in both dimensions (online RP×RP). Since online RP×RP has not been attempted before within this research group, a significant part of this thesis consists of knowledge and experience gained...

  14. Simple Method for Large-Scale Fabrication of Plasmonic Structures

    CERN Document Server

    Makarov, Sergey V; Mukhin, Ivan S; Shishkin, Ivan I; Mozharov, Alexey M; Krasnok, Alexander E; Belov, Pavel A

    2015-01-01

    A novel method for single-step, lithography-free, and large-scale laser writing of nanoparticle-based plasmonic structures has been developed. Changing energy of femtosecond laser pulses and thickness of irradiated gold film it is possible to vary diameter of the gold nanoparticles, while the distance between them can be varied by laser scanning parameters. This method has an advantage over the most previously demonstrated methods in its simplicity and versatility, while the quality of the structures is good enough for many applications. In particular, resonant light absorbtion/scattering and surface-enhanced Raman scattering have been demonstrated on the fabricated nanostructures.

  15. Two-Dimensional Simulation of Flow and Evaluation of Bridge Scour at Structure A-1700 on Interstate 155 over the Mississippi River near Caruthersville, Missouri

    Science.gov (United States)

    Huizinga, Richard J.

    2007-01-01

    The evaluation of scour at bridges throughout the State of Missouri has been ongoing since 1991, and most of these evaluations have used one-dimensional hydraulic analysis and application of conventional scour depth prediction equations. Occasionally, the complex conditions of a site dictate a more thorough assessment of the stream hydraulics beyond a one-dimensional model. This was the case for structure A-1700, the Interstate 155 bridge crossing the Mississippi River near Caruthersville, Missouri. To assess the complex hydraulics at this site, a two-dimensional hydrodynamic flow model was used to simulate flow conditions on the Mississippi River in the vicinity of the Interstate 155 structure A-1700. The model was used to simulate flow conditions for three discharges: a flood that occurred on April 4, 1975 (the calibration flood), which had a discharge of 1,658,000 cubic feet per second; the 100-year flood, which has a discharge of 1,960,000 cubic feet per second; and the project design flood, which has a discharge of 1,974,000 cubic feet per second. The project design flood was essentially equivalent to the flood that would cause impending overtopping of the mainline levees along the Mississippi River in the vicinity of structure A-1700. Discharge and river-stage readings from the flood of April 4, 1975, were used to calibrate the flow model. The model was then used to simulate the 100-year and project design floods. Hydraulic flow parameters obtained from the three flow simulations were applied to scour depth prediction equations to determine contraction, local pier, and abutment scour depths at structure A-1700. Contraction scour and local pier scour depths computed for the project design discharge generally were the greatest, whereas the depths computed for the calibration flood were the least. The maximum predicted total scour depth (contraction and local pier scour) for the calibration flood was 66.1 feet; for the 100-year flood, the maximum predicted total

  16. Terahertz optical-Hall effect characterization of two-dimensional electron gas properties in AlGaN/GaN high electron mobility transistor structures

    Science.gov (United States)

    Schöche, S.; Shi, Junxia; Boosalis, A.; Kühne, P.; Herzinger, C. M.; Woollam, J. A.; Schaff, W. J.; Eastman, L. F.; Schubert, M.; Hofmann, T.

    2011-02-01

    The free-charge carrier mobility, sheet density, and effective mass of a two-dimensional electron gas are exemplarily determined in the spectral range from 640 GHz to 1 THz in a AlGaN/GaN heterostructure using the optical-Hall effect at room temperature. Complementary midinfrared spectroscopic ellipsometry measurements are performed for analysis of heterostructure constituents layer thickness, phonon mode, and free-charge carrier parameters. The electron effective mass is determined to be (0.22±0.04)m0. The high-frequency sheet density and carrier mobility parameters are in good agreement with results from dc electrical Hall effect measurements, indicative for frequency-independent carrier scattering mechanisms of the two-dimensional carrier distribution.

  17. Structure of the lithosphere of the northeastern part of the Indian Ocean according to results of two-dimensional structural-density modeling

    Science.gov (United States)

    Bulychev, A. A.; Gilod, D. A.; Dubinin, E. P.

    2016-05-01

    From a gravitational field analysis, the lithosphere was regionalized and a structural schematic map of the eastern part of the Indian Ocean was compiled. The area adjacent to the western margin of Australia was studied. The region is characterized by a complex lithospheric structure. It includes heterogeneous blocks of varying age, framed by structures with different morphological and geophysical expression and varying genesis. To clarify the peculiarities of tectonic structures of various genetic types, structural-density modeling was performed. This made it possible to establish certain gravimetric indicators characteristic of structures of various genesis.

  18. Two dimensional unstable scar statistics.

    Energy Technology Data Exchange (ETDEWEB)

    Warne, Larry Kevin; Jorgenson, Roy Eberhardt; Kotulski, Joseph Daniel; Lee, Kelvin S. H. (ITT Industries/AES Los Angeles, CA)

    2006-12-01

    This report examines the localization of time harmonic high frequency modal fields in two dimensional cavities along periodic paths between opposing sides of the cavity. The cases where these orbits lead to unstable localized modes are known as scars. This paper examines the enhancements for these unstable orbits when the opposing mirrors are both convex and concave. In the latter case the construction includes the treatment of interior foci.

  19. Two-Dimensional Vernier Scale

    Science.gov (United States)

    Juday, Richard D.

    1992-01-01

    Modified vernier scale gives accurate two-dimensional coordinates from maps, drawings, or cathode-ray-tube displays. Movable circular overlay rests on fixed rectangular-grid overlay. Pitch of circles nine-tenths that of grid and, for greatest accuracy, radii of circles large compared with pitch of grid. Scale enables user to interpolate between finest divisions of regularly spaced rule simply by observing which mark on auxiliary vernier rule aligns with mark on primary rule.

  20. Broadband enhancement of spontaneous emission in a photonic-plasmonic structure

    DEFF Research Database (Denmark)

    Zhu, Xiaolong; Xie, Fengxian; Shi, Lei

    2012-01-01

    We demonstrate that a broadband enhancement of spontaneous emission can be achieved within a photonic-plasmonic structure. The structure can strongly modify the spontaneous emission by exciting plasmonic modes. Because of the excited plasmonic modes, an enhancement up to 30 times is observed, lea......, leading to a 4 times broader emission spectrum. The reflectance measurement and the finite-difference time-domain simulation are carried out to support these results....

  1. Realization of Desired Plasmonic Structures via a Direct Laser Writing Technique

    Science.gov (United States)

    Tong, Quang Cong; Luong, Mai Hoang; Tran, Thi Mo; Remmel, Jacqueline; Do, Minh Thanh; Kieu, Duy Manh; Ghasemi, Rasta; Nguyen, Duc Tho; Lai, Ngoc Diep

    2016-11-01

    We present a recent investigation of fabrication of desired plasmonic structures. First, the polymeric templates were realized by a simple and low-cost fabrication technique based on direct laser writing with a continuous-wave laser source. The plasmonic structures have been then realized by two methods, namely, a combination of gold evaporation and lift-off techniques, and a combination of gold sputtering and thermal annealing techniques. Each method presents its own advantages. Numerous metallic submicro- and nano-structures have been realized, which should be very interesting for different applications, such as high-transmission bandpass filters, plasmonic data storage, and plasmonic photonic devices.

  2. Waveguiding in surface plasmon polariton band gap structures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S.I.; Østergaard, John Erland; Leosson, Kristjan

    2001-01-01

    Using near-held optical microscopy, we investigate propagation and scattering of surface plasmon polaritons (SPP's) excited in the wavelength range of 780-820 nm at nanostructured gold-film surfaces with areas of 200-nm-wide scatterers arranged in a 400-nm-period triangular lattice containing line...... defects. We observe the SPP reflection by such an area and SPP guiding along line defects at 782 nm, as well as significant deterioration of these effects is 815 nm, thereby directly demonstrating the SPP band gap effect and showing first examples of SPP channel waveguides in surface band gap structures....

  3. Photonic and plasmonic structures for enhancing efficiency of thin film silicon solar cells

    Science.gov (United States)

    Pattnaik, Sambit

    Crystalline silicon solar cells use high cost processing techniques as well as thick materials that are ˜ 200µm thick to convert solar energy into electricity. From a cost viewpoint, it is highly advantageous to use thin film solar cells which are generally made in the range of 0.1-3µm in thickness. Due to this low thickness, the quantity of material is greatly reduced and so is the number and complexity of steps involved to complete a device, thereby allowing a continuous processing capability improving the throughput and hence greatly decreasing the cost. This also leads to faster payback time for the end user of the photovoltaic panel. In addition, due to the low thickness and the possibility of deposition on flexible foils, the photovoltaic (PV) modules can be flexible. Such flexible PV modules are well suited for building-integrated applications and for portable, foldable, PV power products. For economical applications of solar cells, high efficiency is an important consideration. Since Si is an indirect bandgap material, a thin film of Si needs efficient light trapping to achieve high optical absorption. The previous work in this field has been mostly based on randomly textured back reflectors. In this work, we have used a novel approach, a periodic photonic and plasmonic structure, to optimize current density of the devices by absorbing longer wavelengths without hampering other properties. The two dimensional diffraction effect generated by a periodic structure with the plasmonic light concentration achieved by silver cones to efficiently propagate light in the plane at the back surface of a solar cell, achieves a significant increase in optical absorption. Using such structures, we achieved a 50%+ increase in short circuit current in a nano-crystalline (nc-Si) solar cell relative to stainless steel. In addition to nc-Si solar cells on stainless steel, we have also used the periodic photonic structure to enhance optical absorption in amorphous cells and

  4. Synthesis, Structure and Characterization of Two-dimensional Network Copper Complex [ Cu3 (nta) 2(azpy) 2(H2O)2]· 6H2O

    Institute of Scientific and Technical Information of China (English)

    LI,Bao-Long(李宝龙); XU,Yan(徐艳); LIU,Qi(刘琦); WANG,Hua-Qin(王化勤); XU,Zheng(徐正)

    2002-01-01

    The copper(Ⅱ) complex [Cu3(nta)2(azpy)2(H2O)2] @6H2O(nta= nitrilotriacetate, azpy= 4,4'-azobispyridine) has been synthesized and characterized. The X-ray analysis reveals that there are two kinds of copper(Ⅱ) coordination environments.Cu(1) has a distorted square plane symmetry and Cu(2) has a distorted octahedral symmetry. Cu(1)is linked to Cu(2)through nta and bound to Cu(1C) by azpy, and Cu(2) islinked to Cu(2A) through azpy, which extends to two-dimensional network with large rhombus 1.2 nm× 1.7 nm.

  5. Two-Dimensional NMR Lineshape Analysis

    Science.gov (United States)

    Waudby, Christopher A.; Ramos, Andres; Cabrita, Lisa D.; Christodoulou, John

    2016-04-01

    NMR titration experiments are a rich source of structural, mechanistic, thermodynamic and kinetic information on biomolecular interactions, which can be extracted through the quantitative analysis of resonance lineshapes. However, applications of such analyses are frequently limited by peak overlap inherent to complex biomolecular systems. Moreover, systematic errors may arise due to the analysis of two-dimensional data using theoretical frameworks developed for one-dimensional experiments. Here we introduce a more accurate and convenient method for the analysis of such data, based on the direct quantum mechanical simulation and fitting of entire two-dimensional experiments, which we implement in a new software tool, TITAN (TITration ANalysis). We expect the approach, which we demonstrate for a variety of protein-protein and protein-ligand interactions, to be particularly useful in providing information on multi-step or multi-component interactions.

  6. A two-dimensional Dirac fermion microscope

    Science.gov (United States)

    Bøggild, Peter; Caridad, José M.; Stampfer, Christoph; Calogero, Gaetano; Papior, Nick Rübner; Brandbyge, Mads

    2017-06-01

    The electron microscope has been a powerful, highly versatile workhorse in the fields of material and surface science, micro and nanotechnology, biology and geology, for nearly 80 years. The advent of two-dimensional materials opens new possibilities for realizing an analogy to electron microscopy in the solid state. Here we provide a perspective view on how a two-dimensional (2D) Dirac fermion-based microscope can be realistically implemented and operated, using graphene as a vacuum chamber for ballistic electrons. We use semiclassical simulations to propose concrete architectures and design rules of 2D electron guns, deflectors, tunable lenses and various detectors. The simulations show how simple objects can be imaged with well-controlled and collimated in-plane beams consisting of relativistic charge carriers. Finally, we discuss the potential of such microscopes for investigating edges, terminations and defects, as well as interfaces, including external nanoscale structures such as adsorbed molecules, nanoparticles or quantum dots.

  7. A two-dimensional Dirac fermion microscope.

    Science.gov (United States)

    Bøggild, Peter; Caridad, José M; Stampfer, Christoph; Calogero, Gaetano; Papior, Nick Rübner; Brandbyge, Mads

    2017-06-09

    The electron microscope has been a powerful, highly versatile workhorse in the fields of material and surface science, micro and nanotechnology, biology and geology, for nearly 80 years. The advent of two-dimensional materials opens new possibilities for realizing an analogy to electron microscopy in the solid state. Here we provide a perspective view on how a two-dimensional (2D) Dirac fermion-based microscope can be realistically implemented and operated, using graphene as a vacuum chamber for ballistic electrons. We use semiclassical simulations to propose concrete architectures and design rules of 2D electron guns, deflectors, tunable lenses and various detectors. The simulations show how simple objects can be imaged with well-controlled and collimated in-plane beams consisting of relativistic charge carriers. Finally, we discuss the potential of such microscopes for investigating edges, terminations and defects, as well as interfaces, including external nanoscale structures such as adsorbed molecules, nanoparticles or quantum dots.

  8. The Chandrasekhar's Equation for Two-Dimensional Hypothetical White Dwarfs

    CERN Document Server

    De, Sanchari

    2014-01-01

    In this article we have extended the original work of Chandrasekhar on the structure of white dwarfs to the two-dimensional case. Although such two-dimensional stellar objects are hypothetical in nature, we strongly believe that the work presented in this article may be prescribed as Master of Science level class problem for the students in physics.

  9. Topological aspect of disclinations in two-dimensional crystals

    Institute of Scientific and Technical Information of China (English)

    Qi Wei-Kai; Zhu Tao; Chen Yong; Ren Ji-Rong

    2009-01-01

    By using topological current theory, this paper studies the inner topological structure of disclinations during the melting of two-dimensional systems. From two-dimensional elasticity theory, it finds that there are topological currents for topological defects in homogeneous equation. The evolution of disclinations is studied, and the branch conditions for generating, annihilating, crossing, splitting and merging of disclinations are given.

  10. Two-dimensional liquid chromatography

    DEFF Research Database (Denmark)

    Græsbøll, Rune

    Two-dimensional liquid chromatography has received increasing interest due to the rise in demand for analysis of complex chemical mixtures. Separation of complex mixtures is hard to achieve as a simple consequence of the sheer number of analytes, as these samples might contain hundreds or even...... dimensions. As a consequence of the conclusions made within this thesis, the research group has, for the time being, decided against further development of online LC×LC systems, since it was not deemed ideal for the intended application, the analysis of the polar fraction of oil. Trap-and...

  11. Amplified-reflection plasmon instabilities in grating-gate plasmonic crystals

    Science.gov (United States)

    Petrov, Aleksandr S.; Svintsov, Dmitry; Ryzhii, Victor; Shur, Michael S.

    2017-01-01

    We identify a possible mechanism of the plasmon instabilities in periodically gated two-dimensional electron systems with a modulated electron density (plasmonic crystals) under direct current. The instability occurs due to the amplified reflection of the small density perturbations from the gated/ungated boundaries under the proper phase-matching conditions between the crystal unit cells. Based on the transfer-matrix formalism, we derive the generic dispersion equation for the traveling plasmons in these structures. Its solution in the hydrodynamic limit shows that the threshold drift velocity for the instability can be tuned below the plasmon phase and carrier saturation velocities, and the plasmon growth rate can exceed the collisional damping rate typical of III-V semiconductors and graphene at room temperature.

  12. Two-dimensional capillary origami

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, N.D., E-mail: nbrubaker@math.arizona.edu; Lega, J., E-mail: lega@math.arizona.edu

    2016-01-08

    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid. - Highlights: • Full solution set of the two-dimensional capillary origami problem. • Fluid does not necessarily wet the entire plate. • Global energy approach provides exact differential equations satisfied by minimizers. • Bifurcation diagrams highlight three different regimes. • Conditions for spontaneous encapsulation are identified.

  13. Giant photoluminescence enhancement in tungsten-diselenide-gold plasmonic hybrid structures

    Science.gov (United States)

    Wang, Zhuo; Dong, Zhaogang; Gu, Yinghong; Chang, Yung-Huang; Zhang, Lei; Li, Lain-Jong; Zhao, Weijie; Eda, Goki; Zhang, Wenjing; Grinblat, Gustavo; Maier, Stefan A.; Yang, Joel K. W.; Qiu, Cheng-Wei; Wee, Andrew T. S.

    2016-05-01

    Impressive properties arise from the atomically thin nature of transition metal dichalcogenide two-dimensional materials. However, being atomically thin limits their optical absorption or emission. Hence, enhancing their photoluminescence by plasmonic nanostructures is critical for integrating these materials in optoelectronic and photonic devices. Typical photoluminescence enhancement from transition metal dichalcogenides is 100-fold, with recent enhancement of 1,000-fold achieved by simultaneously enhancing absorption, emission and directionality of the system. By suspending WSe2 flakes onto sub-20-nm-wide trenches in gold substrate, we report a giant photoluminescence enhancement of ~20,000-fold. It is attributed to an enhanced absorption of the pump laser due to the lateral gap plasmons confined in the trenches and the enhanced Purcell factor by the plasmonic nanostructure. This work demonstrates the feasibility of giant photoluminescence enhancement in WSe2 with judiciously designed plasmonic nanostructures and paves a way towards the implementation of plasmon-enhanced transition metal dichalcogenide photodetectors, sensors and emitters.

  14. Giant photoluminescence enhancement in tungsten-diselenide–gold plasmonic hybrid structures

    KAUST Repository

    Wang, Zhuo

    2016-05-06

    Impressive properties arise from the atomically thin nature of transition metal dichalcogenide two-dimensional materials. However, being atomically thin limits their optical absorption or emission. Hence, enhancing their photoluminescence by plasmonic nanostructures is critical for integrating these materials in optoelectronic and photonic devices. Typical photoluminescence enhancement from transition metal dichalcogenides is 100-fold, with recent enhancement of 1,000-fold achieved by simultaneously enhancing absorption, emission and directionality of the system. By suspending WSe2 flakes onto sub-20-nm-wide trenches in gold substrate, we report a giant photoluminescence enhancement of ~20,000-fold. It is attributed to an enhanced absorption of the pump laser due to the lateral gap plasmons confined in the trenches and the enhanced Purcell factor by the plasmonic nanostructure. This work demonstrates the feasibility of giant photoluminescence enhancement in WSe2 with judiciously designed plasmonic nanostructures and paves a way towards the implementation of plasmon-enhanced transition metal dichalcogenide photodetectors, sensors and emitters.

  15. Giant photoluminescence enhancement in tungsten-diselenide-gold plasmonic hybrid structures.

    Science.gov (United States)

    Wang, Zhuo; Dong, Zhaogang; Gu, Yinghong; Chang, Yung-Huang; Zhang, Lei; Li, Lain-Jong; Zhao, Weijie; Eda, Goki; Zhang, Wenjing; Grinblat, Gustavo; Maier, Stefan A; Yang, Joel K W; Qiu, Cheng-Wei; Wee, Andrew T S

    2016-05-06

    Impressive properties arise from the atomically thin nature of transition metal dichalcogenide two-dimensional materials. However, being atomically thin limits their optical absorption or emission. Hence, enhancing their photoluminescence by plasmonic nanostructures is critical for integrating these materials in optoelectronic and photonic devices. Typical photoluminescence enhancement from transition metal dichalcogenides is 100-fold, with recent enhancement of 1,000-fold achieved by simultaneously enhancing absorption, emission and directionality of the system. By suspending WSe2 flakes onto sub-20-nm-wide trenches in gold substrate, we report a giant photoluminescence enhancement of ∼20,000-fold. It is attributed to an enhanced absorption of the pump laser due to the lateral gap plasmons confined in the trenches and the enhanced Purcell factor by the plasmonic nanostructure. This work demonstrates the feasibility of giant photoluminescence enhancement in WSe2 with judiciously designed plasmonic nanostructures and paves a way towards the implementation of plasmon-enhanced transition metal dichalcogenide photodetectors, sensors and emitters.

  16. Giant photoluminescence enhancement in tungsten-diselenide–gold plasmonic hybrid structures

    Science.gov (United States)

    Wang, Zhuo; Dong, Zhaogang; Gu, Yinghong; Chang, Yung-Huang; Zhang, Lei; Li, Lain-Jong; Zhao, Weijie; Eda, Goki; Zhang, Wenjing; Grinblat, Gustavo; Maier, Stefan A.; Yang, Joel K. W.; Qiu, Cheng-Wei; Wee, Andrew T. S.

    2016-01-01

    Impressive properties arise from the atomically thin nature of transition metal dichalcogenide two-dimensional materials. However, being atomically thin limits their optical absorption or emission. Hence, enhancing their photoluminescence by plasmonic nanostructures is critical for integrating these materials in optoelectronic and photonic devices. Typical photoluminescence enhancement from transition metal dichalcogenides is 100-fold, with recent enhancement of 1,000-fold achieved by simultaneously enhancing absorption, emission and directionality of the system. By suspending WSe2 flakes onto sub-20-nm-wide trenches in gold substrate, we report a giant photoluminescence enhancement of ∼20,000-fold. It is attributed to an enhanced absorption of the pump laser due to the lateral gap plasmons confined in the trenches and the enhanced Purcell factor by the plasmonic nanostructure. This work demonstrates the feasibility of giant photoluminescence enhancement in WSe2 with judiciously designed plasmonic nanostructures and paves a way towards the implementation of plasmon-enhanced transition metal dichalcogenide photodetectors, sensors and emitters. PMID:27150276

  17. Optical properties of a nanomatch-like plasmonic structure.

    Science.gov (United States)

    Cui, Xudong; Zhang, Weihua; Erni, Daniel; Dong, Lixin

    2010-08-01

    The optical properties of a match-like plasmonic nanostructure are numerically investigated using full-wave finite-difference time-domain analysis in conjunction with dispersive material models. This work is mainly motivated by the developed technique enabling reproducible fabrication of nanomatch structures as well as the growing applications that utilize the localized field enhancement in plasmonic nanostructures. Our research revealed that due to the pronounced field enhancement and larger resonance tunabilities, some nanomatch topologies show potentials for various applications in the field of, e.g., sensing as well as a novel scheme for highly reproducible tips in scanning near field optical microscopy, among others. Despite the additional degrees of freedom that are offered by the composite nature of the proposed nanomatch topology, the paper also reflects on a fundamental complication intrinsic to the material interfaces especially in the nanoscale: stoichiometric mixing. We conclude that the specificity in material modeling will become a significant issue in future research on functionalized composite nanostructures.

  18. Two-dimensional capillary origami

    Science.gov (United States)

    Brubaker, N. D.; Lega, J.

    2016-01-01

    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid.

  19. Two-dimensional cubic convolution.

    Science.gov (United States)

    Reichenbach, Stephen E; Geng, Frank

    2003-01-01

    The paper develops two-dimensional (2D), nonseparable, piecewise cubic convolution (PCC) for image interpolation. Traditionally, PCC has been implemented based on a one-dimensional (1D) derivation with a separable generalization to two dimensions. However, typical scenes and imaging systems are not separable, so the traditional approach is suboptimal. We develop a closed-form derivation for a two-parameter, 2D PCC kernel with support [-2,2] x [-2,2] that is constrained for continuity, smoothness, symmetry, and flat-field response. Our analyses, using several image models, including Markov random fields, demonstrate that the 2D PCC yields small improvements in interpolation fidelity over the traditional, separable approach. The constraints on the derivation can be relaxed to provide greater flexibility and performance.

  20. Two-Dimensional Hydrodynamic Modeling and Analysis of the Proposed Channel Modifications and Grade Control Structure on the Blue River near Byram's Ford Industrial Park, Kansas City, Missouri

    Science.gov (United States)

    Huizinga, Richard J.

    2007-01-01

    The Blue River Channel Modification project being implemented by the U.S. Army Corps of Engineers (USACE) is intended to provide flood protection within the Blue River valley in the Kansas City, Mo., metropolitan area. In the latest phase of the project, concerns have arisen about preserving the Civil War historic area of Byram's Ford and the associated Big Blue Battlefield while providing flood protection for the Byram's Ford Industrial Park. In 1996, the USACE used a physical model built at the Waterways Experiment Station (WES) in Vicksburg, Miss., to examine the feasibility of a proposed grade control structure (GCS) that would be placed downstream from the historic river crossing of Byram's Ford to provide a subtle transition of flow from the natural channel to the modified channel. The U.S. Geological Survey (USGS), in cooperation with the USACE, modified an existing two-dimensional finite element surface-water model of the river between 63d Street and Blue Parkway (the 'original model'), used the modified model to simulate the existing (as of 2006) unimproved channel and the proposed channel modifications and GCS, and analyzed the results from the simulations and those from the WES physical model. Modifications were made to the original model to create a model that represents existing (2006) conditions between the north end of Swope Park immediately upstream from 63d Street and the upstream limit of channel improvement on the Blue River (the 'model of existing conditions'). The model of existing conditions was calibrated to two measured floods. The model of existing conditions also was modified to create a model that represents conditions along the same reach of the Blue River with proposed channel modifications and the proposed GCS (the 'model of proposed conditions'). The models of existing conditions and proposed conditions were used to simulate the 30-, 50-, and 100-year recurrence floods. The discharge from the calibration flood of May 15, 1990, also

  1. The crystal structure, luminescence and nitrobenzene-sensing properties of a two-dimensional Mn(II) coordination polymer based on 2,6-bis(imidazol-1-yl)pyridine.

    Science.gov (United States)

    Wang, Yin-Lin; Long, Ling-Liang; Zhang, Jin-Fang

    2015-06-01

    A two-dimensional Mn(II) coordination polymer (CP), poly[bis[μ2-2,6-bis(imidazol-1-yl)pyridine-κ(2)N(3):N(3')]bis(thiocyanato-κN)manganese] [Mn(NCS)2(C11H9N5)2]n, (I), has been obtained by the self-assembly reaction of Mn(ClO4)2·6H2O, NH4SCN and bent 2,6-bis(imidazol-1-yl)pyridine (2,6-bip). CP (I) was characterized by FT-IR spectroscopy, elemental analysis and single-crystal X-ray diffraction. The crystal structure features a unique two-dimensional (4,4) network with one-dimensional channels. The luminescence and nitrobenzene-sensing properties were explored in a DMF suspension, revealing that CP (I) shows a strong luminescence emission and is highly sensitive for nitrobenzene detection.

  2. Controlling Surface-plasmon-polariton Launching with Hot Spot Cylindrical Waves in a Metallic Slit Structure

    CERN Document Server

    Yao, Wenjie; Chen, Jianjun; Gong, Qihuang

    2015-01-01

    Plasmonic nanostructures, which are used to generate surface plasmon polaritions (SPPs), always involve sharp corners where the charges can accumulate. This can result in strong localized electromagnetic fields at the metallic corners, forming hot spots. The influence of the hot spots on the propagating SPPs are investigated theoretically and experimentally in a metallic slit structure. It is found that the electromagnetic fields radiated from the hot spots, termed as the hot spot cylindrical wave (HSCW), can greatly manipulate the SPP launching in the slit structure. The physical mechanism behind the manipulation of the SPP launching with the HSCW is explicated by a semi-analytic model. By using the HSCW, unidirectional SPP launching is experimentally realized in an ultra-small metallic step-slit structure. The HSCW bridges the localized surface plasmons and the propagating surface plasmons in an integrated platform and thus may pave a new route to the design of plasmonic devices and circuits.

  3. Application of Generalized Mie Theory to EELS Calculations as a Tool for Optimization of Plasmonic Structures

    DEFF Research Database (Denmark)

    Thomas, Stefan; Matyssek, Christian; Hergert, Wolfram

    2015-01-01

    Technical applications of plasmonic nanostructures require a careful structural optimization with respect to the desired functionality. The success of such optimizations strongly depends on the applied method. We extend the generalized multiparticle Mie (GMM) computational electromagnetic method ...... by the application of genetic algorithms combined with a simplex algorithm. The scheme is applied to the design of plasmonic filters....

  4. A new two-dimensional approach to quantitative prediction for collision cross-section of more than 110 singly protonated peptides by a novel moecular electronegativity-interaction vector through quantitative structure-spectrometry relationship studies

    Institute of Scientific and Technical Information of China (English)

    ZHOU Peng; MEI Hu; TIAN Feifei; WANG Jiaona; WU Shirong; LI Zhiliang

    2007-01-01

    Based on two-dimensional topological characters,a novel method called molecular electronegativityinteraction vector(MEIV)is proposed to parameterize molecular structures.Applying MEIV into quantitative structure-spectrometry relationship studies on ion mobility spectrometry collision cross-sections of 113 singly protonated peptides,three models were strictly obtained,with correlative coefficient r and leave-one-out cross-validation q of 0.983,0.979,0.981,0.979 and 0.980,0.978,respectively.Thus,the MEIV is confirmed to be potent to structural characterizations and property predictions for organic and biologic molecules.

  5. Tapered dielectric structure in metal as a wavelength-selective surface plasmon polariton focuser

    Institute of Scientific and Technical Information of China (English)

    Zhang Yang; Zhao Qing; Liao Zhi-Min; Yu Da-Peng

    2009-01-01

    Symmetric tapered dielectric structures in metal have demonstrated applications such as the nanofocusing of surface plasmon polaxitons, as well as the waveguiding of V-channel polaxitons. Yet the fabrication of smooth-surfaced tapered structure remains an obstacle to most researchers. We have successfully developed a handy method to fabricate metal-sandwiched tapered nanostructures simply with electron beam lithography. Though these structures are slightly different from conventional symmetric V-shaped structures, systematic simulations show that similar functionality of surface plasmon polaxiton nanofocusing can still be achieved, When parameters are properly selected, wavelengthselective nanofocusing of surface plasmon polaritons can be obtained.

  6. Binding energy of two-dimensional biexcitons

    DEFF Research Database (Denmark)

    Singh, Jai; Birkedal, Dan; Vadim, Lyssenko;

    1996-01-01

    Using a model structure for a two-dimensional (2D) biexciton confined in a quantum well, it is shown that the form of the Hamiltonian of the 2D biexciton reduces into that of an exciton. The binding energies and Bohr radii of a 2D biexciton in its various internal energy states are derived...... analytically using the fractional dimension approach. The ratio of the binding energy of a 2D biexciton to that of a 2D exciton is found to be 0.228, which agrees very well with the recent experimental value. The results of our approach are compared with those of earlier theories....

  7. Two-dimensional hybrid layered materials: strain engineering on the band structure of MoS2/WSe2 hetero-multilayers

    Science.gov (United States)

    Gu, Kunming; Yu, Sheng; Eshun, Kwesi; Yuan, Haiwen; Ye, Huixian; Tang, Jiaoning; Ioannou, Dimitris E.; Xiao, Changshi; Wang, Hui; Li, Qiliang

    2017-09-01

    In this paper, we report a comprehensive modeling and simulation study of constructing hybrid layered materials by alternately stacking MoS2 and WSe2 monolayers. Such hybrid MoS2/WSe2 hetero-multilayers exhibited direct bandgap semiconductor characteristics with bandgap energy (E g) in a range of 0.45-0.55 eV at room temperature, very attractive for optoelectronics (wavelength range 2.5-2.75 μm) based on thicker two-dimensional (2D) materials. It was also found that the interlayer distance has a significant impact on the electronic properties of the hetero-multilayers, for example a five orders of magnitude change in the conductance was observed. Three material phases, direct bandgap semiconductor, indirect bandgap semiconductor, and metal were observed in MoS2/WSe2 hetero-multilayers, as the interlayer distance decreased from its relaxed (i.e., equilibrium) value of about 6.73 Å down to 5.50 Å, representing a vertical pressure of about 0.8 GPa for the bilayer and 1.5 GPa for the trilayer. Such new hybrid layered materials are very interesting for future nanoelectronic pressure sensor and nanophotonic applications. This study describes a new approach to explore and engineer the construction and application of tunable 2D semiconductors.

  8. The electronic structure of free aluminum clusters: metallicity and plasmons.

    Science.gov (United States)

    Andersson, Tomas; Zhang, Chaofan; Tchaplyguine, Maxim; Svensson, Svante; Mårtensson, Nils; Björneholm, Olle

    2012-05-28

    The electronic structure of free aluminum clusters with ∼3-4 nm radius has been investigated using synchrotron radiation-based photoelectron and Auger electron spectroscopy. A beam of free clusters has been produced using a gas-aggregation source. The 2p core level and the valence band have been probed. Photoelectron energy-loss features corresponding to both bulk and surface plasmon excitation following photoionization of the 2p level have been observed, and the excitation energies have been derived. In contrast to some expectations, the loss features have been detected at energies very close to those of the macroscopic solid. The results are discussed from the point of view of metallic properties in nanoparticles with a finite number of constituent atoms.

  9. The electronic structure of free aluminum clusters: Metallicity and plasmons

    Science.gov (United States)

    Andersson, Tomas; Zhang, Chaofan; Tchaplyguine, Maxim; Svensson, Svante; Mârtensson, Nils; Björneholm, Olle

    2012-05-01

    The electronic structure of free aluminum clusters with ˜3-4 nm radius has been investigated using synchrotron radiation-based photoelectron and Auger electron spectroscopy. A beam of free clusters has been produced using a gas-aggregation source. The 2p core level and the valence band have been probed. Photoelectron energy-loss features corresponding to both bulk and surface plasmon excitation following photoionization of the 2p level have been observed, and the excitation energies have been derived. In contrast to some expectations, the loss features have been detected at energies very close to those of the macroscopic solid. The results are discussed from the point of view of metallic properties in nanoparticles with a finite number of constituent atoms.

  10. Probing topological protection using a designer surface plasmon structure

    Science.gov (United States)

    Gao, Fei; Gao, Zhen; Shi, Xihang; Yang, Zhaoju; Lin, Xiao; Xu, Hongyi; Joannopoulos, John D.; Soljačić, Marin; Chen, Hongsheng; Lu, Ling; Chong, Yidong; Zhang, Baile

    2016-01-01

    Topological photonic states, inspired by robust chiral edge states in topological insulators, have recently been demonstrated in a few photonic systems, including an array of coupled on-chip ring resonators at communication wavelengths. However, the intrinsic difference between electrons and photons determines that the ‘topological protection' in time-reversal-invariant photonic systems does not share the same robustness as its counterpart in electronic topological insulators. Here in a designer surface plasmon platform consisting of tunable metallic sub-wavelength structures, we construct photonic topological edge states and probe their robustness against a variety of defect classes, including some common time-reversal-invariant photonic defects that can break the topological protection, but do not exist in electronic topological insulators. This is also an experimental realization of anomalous Floquet topological edge states, whose topological phase cannot be predicted by the usual Chern number topological invariants. PMID:27197877

  11. Tunable plasmonic crystal

    Science.gov (United States)

    Dyer, Gregory Conrad; Shaner, Eric A.; Reno, John L.; Aizin, Gregory

    2015-08-11

    A tunable plasmonic crystal comprises several periods in a two-dimensional electron or hole gas plasmonic medium that is both extremely subwavelength (.about..lamda./100) and tunable through the application of voltages to metal electrodes. Tuning of the plasmonic crystal band edges can be realized in materials such as semiconductors and graphene to actively control the plasmonic crystal dispersion in the terahertz and infrared spectral regions. The tunable plasmonic crystal provides a useful degree of freedom for applications in slow light devices, voltage-tunable waveguides, filters, ultra-sensitive direct and heterodyne THz detectors, and THz oscillators.

  12. Plasmonic Demultiplexer and Guiding

    CERN Document Server

    Zhao, Chenglong

    2010-01-01

    Two-dimensional plasmonic demultiplexers for surface plasmon polaritons (SPPs), which consist of concentric grooves on a gold film, are proposed and experimentally demonstrated to realize light-SPP coupling, effective dispersion and multiple-channel SPP guiding. A resolution as high as 10 nm is obtained. The leakage radiation microscopy imaging shows that the SPPs of different wavelengths are focused and routed into different SPP strip waveguides. The plasmonic demultiplexer can thus serve as a wavelength division multiplexing element for integrated plasmonic circuit and also as a plasmonic spectroscopy or filter.

  13. Tunable plasmonic crystal

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, Gregory Conrad; Shaner, Eric A.; Reno, John L.; Aizin, Gregory

    2015-08-11

    A tunable plasmonic crystal comprises several periods in a two-dimensional electron or hole gas plasmonic medium that is both extremely subwavelength (.about..lamda./100) and tunable through the application of voltages to metal electrodes. Tuning of the plasmonic crystal band edges can be realized in materials such as semiconductors and graphene to actively control the plasmonic crystal dispersion in the terahertz and infrared spectral regions. The tunable plasmonic crystal provides a useful degree of freedom for applications in slow light devices, voltage-tunable waveguides, filters, ultra-sensitive direct and heterodyne THz detectors, and THz oscillators.

  14. Two-Dimensional Theory of Scientific Representation

    Directory of Open Access Journals (Sweden)

    A Yaghmaie

    2013-03-01

    Full Text Available Scientific representation is an interesting topic for philosophers of science, many of whom have recently explored it from different points of view. There are currently two competing approaches to the issue: cognitive and non-cognitive, and each of them claims its own merits over the other. This article tries to provide a hybrid theory of scientific representation, called Two-Dimensional Theory of Scientific Representation, which has the merits of the two accounts and is free of their shortcomings. To do this, we will argue that although scientific representation needs to use the notion of intentionality, such a notion is defined and realized in a simply structural form contrary to what cognitive approach says about intentionality. After a short introduction, the second part of the paper is devoted to introducing theories of scientific representation briefly. In the third part, the structural accounts of representation will be criticized. The next step is to introduce the two-dimensional theory which involves two key components: fixing and structural fitness. It will be argued that fitness is an objective and non-intentional relation, while fixing is intentional.

  15. Challenges of fabricating plasmonic and photonic structures with Neon ion beam milling

    DEFF Research Database (Denmark)

    Leißner, Till; Fiutowski, Jacek; Bozhevolnyi, Sergey I.

    properties. We are currently studying the capabilities of focussed Helium and Neon ion beam milling for the fabricating of plasmonic and photonic devices. We found that Neon ion beam milling enables us to prepare plasmonic structures, such as trenches (see Fig. 1) and V-grooves without doping and alloying...... effects specific to Galium FIB. Neon FIB milling is superior to Helium FIB milling in terms of the processing speed and smaller levels of implanted ions. From our perspective it is the most promising technique for the fabrication of individual plasmonic devices with a few nanometers precision. The main...... presentation we show the current progress in Neon FIB milling of plasmonic structures. We compare different materials, in particular poly- and mono-crystalline gold as well as thin films of Titanium Nitride, which are commonly used for plasmonic applications....

  16. Collective charge excitations of the two-dimensional electride Ca2N

    Science.gov (United States)

    Cudazzo, Pierluigi; Gatti, Matteo

    2017-09-01

    Ca2N is a layered material that has been recently identified as a two-dimensional (2D) electride, an unusual ionic compound in which electrons serve as anions. The electronic properties of 2D electrides attract considerable interest as the anionic electrons, which form a 2D layer sandwiched between atomic planes, are highly mobile as they are not attached to any ion. Here, on the basis of first-principles time-dependent density-functional theory calculations, we investigate the collective excitations of the electrons—i.e., the plasmons—in Ca2N as a function of wave vector q . Our calculations reveal an intrinsic negative in-plane dispersion of the anionic plasmon, in striking contrast with the homogeneous electron gas. Moreover, for wave vectors q normal to the planes, we find a long-lived plasmon that continues to exist well beyond the first Brillouin zone. This is a mark of the electronic inhomogeneities in the charge response that Ca2N shares with other layered materials like transition-metal dichalcogenides and MgB2. Finally, we compare the plasmon properties of Ca2N in its bulk and monolayer forms, which shows the effect of the different electronic structures and dimensionalities.

  17. Classifying Two-dimensional Hyporeductive Triple Algebras

    CERN Document Server

    Issa, A Nourou

    2010-01-01

    Two-dimensional real hyporeductive triple algebras (h.t.a.) are investigated. A classification of such algebras is presented. As a consequence, a classification of two-dimensional real Lie triple algebras (i.e. generalized Lie triple systems) and two-dimensional real Bol algebras is given.

  18. Transmission and reflection properties of two-dimensional finite metal crystals

    Science.gov (United States)

    Roszkiewicz, Agata; Nasalski, Wojciech

    2017-07-01

    Optical characteristics of a finite two-dimensional silver stripe photonic crystal of a square lattice are numerically analysed with use of multilayer Rigorous Coupled Wave Analysis. Qualitative changes in optical response of the crystal originated from modifications of the thickness and filling factors of each layer and the polarization direction of the incident wave are shown. The crystal manifests its various characteristics in wideband or narrowband reflection and transmission, while absorption remains low. The behaviour of the crystal is determined by its structure geometry yielding excitation of localized plasmons and collective modes together with interactions between them. The optical response of the square lattice structure is also compared with the response of a triangular lattice crystal.

  19. Plasmonic colour generation

    DEFF Research Database (Denmark)

    Kristensen, Anders; Yang, Joel K. W.; Bozhevolnyi, Sergey I.

    2016-01-01

    Plasmonic colours are structural colours that emerge from resonant interactions between light and metallic nanostructures. The engineering of plasmonic colours is a promising, rapidly emerging research field that could have a large technological impact. We highlight basic properties of plasmonic...

  20. Overview of the Characteristics of Micro- and Nano-Structured Surface Plasmon Resonance Sensors

    Directory of Open Access Journals (Sweden)

    Byoungho Lee

    2011-01-01

    Full Text Available The performance of bio-chemical sensing devices has been greatly improved by the development of surface plasmon resonance (SPR based sensors. Advancements in micro- and nano-fabrication technologies have led to a variety of structures in SPR sensing systems being proposed. In this review, SPR sensors (from typical Kretschmann prism configurations to fiber sensor schemes with micro- or nano-structures for local light field enhancement, extraordinary optical transmission, interference of surface plasmon waves, plasmonic cavities, etc. are discussed. We summarize and compare their performances and present guidelines for the design of SPR sensors.

  1. A study of two-dimensional magnetic polaron

    Institute of Scientific and Technical Information of China (English)

    LIU; Tao; ZHANG; Huaihong; FENG; Mang; WANG; Kelin

    2006-01-01

    By using the variational method and anneal simulation, we study in this paper the self-trapped magnetic polaron (STMP) in two-dimensional anti-ferromagnetic material and the bound magnetic polaron (BMP) in ferromagnetic material. Schwinger angular momentum theory is applied to changing the problem into a coupling problem of carriers and two types of Bosons. Our calculation shows that there are single-peak and multi-peak structures in the two-dimensional STMP. For the ferromagnetic material, the properties of the two-dimensional BMP are almost the same as that in one-dimensional case; but for the anti-ferromagnetic material, the two-dimensional STMP structure is much richer than the one-dimensional case.

  2. Coexistence of classical and quantum plasmonics in large plasmonic structures with subnanometer gaps

    DEFF Research Database (Denmark)

    Kadkhodazadeh, Shima; Wagner, Jakob Birkedal; Kneipp, Harald;

    2013-01-01

    Large metal nanostructures with subnanometer interparticle separations (gaps) can provide extremely high local fields and are of particular interest in surface enhanced spectroscopy, as well as for basic understanding of plasmonics. In this experimental electron energy loss study, we monitor the ...

  3. Equivalency of two-dimensional algebras

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Gildemar Carneiro dos; Pomponet Filho, Balbino Jose S. [Universidade Federal da Bahia (UFBA), BA (Brazil). Inst. de Fisica

    2011-07-01

    Full text: Let us consider a vector z = xi + yj over the field of real numbers, whose basis (i,j) satisfy a given algebra. Any property of this algebra will be reflected in any function of z, so we can state that the knowledge of the properties of an algebra leads to more general conclusions than the knowledge of the properties of a function. However structural properties of an algebra do not change when this algebra suffers a linear transformation, though the structural constants defining this algebra do change. We say that two algebras are equivalent to each other whenever they are related by a linear transformation. In this case, we have found that some relations between the structural constants are sufficient to recognize whether or not an algebra is equivalent to another. In spite that the basis transform linearly, the structural constants change like a third order tensor, but some combinations of these tensors result in a linear transformation, allowing to write the entries of the transformation matrix as function of the structural constants. Eventually, a systematic way to find the transformation matrix between these equivalent algebras is obtained. In this sense, we have performed the thorough classification of associative commutative two-dimensional algebras, and find that even non-division algebra may be helpful in solving non-linear dynamic systems. The Mandelbrot set was used to have a pictorial view of each algebra, since equivalent algebras result in the same pattern. Presently we have succeeded in classifying some non-associative two-dimensional algebras, a task more difficult than for associative one. (author)

  4. Omnidirectional excitation of sidewall gap-plasmons in a hybrid gold-nanoparticle/aluminum-nanopore structure

    Science.gov (United States)

    Lumdee, Chatdanai; Kik, Pieter G.

    2016-06-01

    The gap-plasmon resonance of a gold nanoparticle inside a nanopore in an aluminum film is investigated in polarization dependent single particle microscopy and spectroscopy. Scattering and transmission measurements reveal that gap-plasmons of this structure can be excited and observed under normal incidence excitation and collection, in contrast to the more common particle-on-a-mirror structure. Correlation of numerical simulations with optical spectroscopy suggests that a local electric field enhancement factor in excess of 50 is achieved under normal incidence excitation, with a hot-spot located near the top surface of the structure. It is shown that the strong field enhancement from this sidewall gap-plasmon mode can be efficiently excited over a broad angular range. The presented plasmonic structure lends itself to implementation in low-cost, chemically stable, easily addressable biochemical sensor arrays providing large optical field enhancement factors.

  5. Enhancement of electron hot spot relaxation in photoexcited plasmonic structures by thermal diffusion

    CERN Document Server

    Spitzer, F; Belotelov, V I; Vondran, J; Akimov, I A; Kasture, S; Achanta, V G; Yakovlev, D R; Bayer, M

    2016-01-01

    We demonstrate that in confined plasmonic metal structures subject to ultra-fast laser excitation electron thermal diffusion can provide relaxation faster than the energy transfer to the lattice. This relaxation occurs due to excitation of nanometer-sized hot spots in the confined structure and the sensitivity of its optical parameters to the perturbation in these regions. Both factors become essential when the plasmonic resonance condition is met for both excitation and detection. A pump-probe experiment on plasmonic gold lattices shows sub-picosecond relaxation with the characteristic times well-described by a two-temperature model. The results suggest that dynamical optical response in plasmonic structures can be tuned by selection of the structural geometry as well as the choice of wavelength and polarization of the excitation and detection light.

  6. FACE RECOGNITION USING TWO DIMENSIONAL LAPLACIAN EIGENMAP

    Institute of Scientific and Technical Information of China (English)

    Chen Jiangfeng; Yuan Baozong; Pei Bingnan

    2008-01-01

    Recently,some research efforts have shown that face images possibly reside on a nonlinear sub-manifold. Though Laplacianfaces method considered the manifold structures of the face images,it has limits to solve face recognition problem. This paper proposes a new feature extraction method,Two Dimensional Laplacian EigenMap (2DLEM),which especially considers the manifold structures of the face images,and extracts the proper features from face image matrix directly by using a linear transformation. As opposed to Laplacianfaces,2DLEM extracts features directly from 2D images without a vectorization preprocessing. To test 2DLEM and evaluate its performance,a series of ex-periments are performed on the ORL database and the Yale database. Moreover,several experiments are performed to compare the performance of three 2D methods. The experiments show that 2DLEM achieves the best performance.

  7. Synthesis, property and crystal structure of a novel two-dimensional network organic-inorganic hybrid compound based on the neodymium III center and Keggin-type heteropolyanion of [α-BW 12O 40] 5-

    Science.gov (United States)

    Niu, Jingyang; Zhao, Junwei; Wang, Jingping; Ma, Pengtao

    2004-08-01

    A novel two-dimensional infinite network organic-inorganic hybrid neodymium(III)-centered compound of formula (dmaH) 2[Nd(dmf) 4(H 2O)][α-BW 12O 40]·H 2O ( 1) [dma=dimethylamine and dmf= N, N-dimethylformamide] is obtained by the conventional self-assembly reaction of neodymium oxide, N, N-dimethylformamide and borotungstic acid (α-H 5BW 12O 40·30H 2O) in the mixed solvent of acetonitrile and water, and characterized by IR, UV-visible spectra and X-ray single crystal diffraction. Structural analysis indicates that every [α-BW 12O 40] 5- polyanion interconnects with three adjacent [Nd(dmf) 4(H 2O)] 3+ subunits by means of W-O-Nd bridges, meanwhile, every [Nd(dmf) 4(H 2O)] 3+ building block is surrounded by three neighboring [α-BW 12O 40] 5- polyanions by making use of which an unprecedented two-dimensional extended network structure can be constructed. Interestingly, this structure pattern may act as useful model for the design and assembly of functional molecule-based compounds, especially in the field of molecular sieve materials.

  8. Counterintuitive dispersion effect near surface plasmon resonances in Otto structures

    Science.gov (United States)

    Wang, Lin; Wang, Li-Gang; Ye, Lin-Hua; Al-Amri, M.; Zhu, Shi-Yao; Zubairy, M. Suhail

    2016-07-01

    In this paper, we investigate the counterintuitive dispersion effect associated with the poles and zeros of reflection and transmission functions in an Otto configuration when a surface plasmon resonance is excited. We show that the zeros and/or poles in the reflection and transmission functions may move into the upper-half complex-frequency plane (CFP), and these locations of the zeros and poles determine the dispersion properties of the whole structures (i.e., the frequency-dependent change of both reflected and transmitted phases). Meanwhile, we demonstrate various dispersion effects (both normal and abnormal) related to the changes of the poles and zeros in both reflection and transmission functions when considering the properties of metal substrates. For a realistic metal substrate in an Otto structure, there are the optimal thickness and incident angle, which correspond to the transitions of the zeros in the reflection function from the upper-half to lower-half CFP. These properties may be helpful to manipulate light propagation in optical devices.

  9. Hadamard States and Two-dimensional Gravity

    CERN Document Server

    Salehi, H

    2001-01-01

    We have used a two-dimensional analog of the Hadamard state-condition to study the local constraints on the two-point function of a linear quantum field conformally coupled to a two-dimensional gravitational background. We develop a dynamical model in which the determination of the state of the quantum field is essentially related to the determination of a conformal frame. A particular conformal frame is then introduced in which a two-dimensional gravitational equation is established.

  10. A two-dimensional polymer prepared by organic synthesis.

    Science.gov (United States)

    Kissel, Patrick; Erni, Rolf; Schweizer, W Bernd; Rossell, Marta D; King, Benjamin T; Bauer, Thomas; Götzinger, Stephan; Schlüter, A Dieter; Sakamoto, Junji

    2012-02-05

    Synthetic polymers are widely used materials, as attested by a production of more than 200 millions of tons per year, and are typically composed of linear repeat units. They may also be branched or irregularly crosslinked. Here, we introduce a two-dimensional polymer with internal periodicity composed of areal repeat units. This is an extension of Staudinger's polymerization concept (to form macromolecules by covalently linking repeat units together), but in two dimensions. A well-known example of such a two-dimensional polymer is graphene, but its thermolytic synthesis precludes molecular design on demand. Here, we have rationally synthesized an ordered, non-equilibrium two-dimensional polymer far beyond molecular dimensions. The procedure includes the crystallization of a specifically designed photoreactive monomer into a layered structure, a photo-polymerization step within the crystal and a solvent-induced delamination step that isolates individual two-dimensional polymers as free-standing, monolayered molecular sheets.

  11. Plasmonic Structures for CMOS Photonics and Control of Spontaneous Emission

    Science.gov (United States)

    2013-04-01

    Red, Green, Blue, Yellow, Magenta, Cyan) averaged CIE Delta-E 2000 = 16.6-19.3 after a white balance and color matrix correction is applied to the...insertion loss and also metal-insulator-metal waveguides; iii) developed a full format CMOS image sensor with plasmonic color filters; iv) explored... color filters and demonstration of imaging. v. Design of a plasMOStor plasmonic switching device, with low insertion loss, implemented in CMOS Si

  12. The Deconstruction of Japanese Two-dimensional Animation Industry System Based on the Theory of Dissipative Structure%基于耗散结构理论的日本“二次元”动漫产业系统

    Institute of Scientific and Technical Information of China (English)

    李彬; 熊文靓

    2015-01-01

    近年来,日本“二次元”动漫产业已成为动漫界热议的焦点。基于耗散结构理论解析日本“二次元”动漫产业系统发现其具有远离平衡态、非线性、突变性和涨落等耗散结构特点。支撑日本“二次元”动漫产业系统的体系包括政府支持、人才输送、知识产权法律、投融资渠道等。日本经验启示中国发展动漫产业应采取建立激励保健机制、创建学科交叉平台、增加信息技术投入和变“走出去”为“融进去”等措施。%In recent years, Japanese two-dimensional animation industry has become the focus of the debate in animation industry. Based on the theory of dissipative structure, the deconstruction of Japanese two-dimensional animation industry system is found to be far from equilibrium, nonlinear, mutability and lfuctuation etc. The support system of Japanese two-dimensional animation industry system mainly includes the support from the government, intellectual property act, investment and ifnancing. system. Taking examples from Japan's experience, countermeasures are ought to be taken, that establishing incentive care mechanism, creating a platform of cross-disciplines, increasing information technology investment, and "going out" to "blend in", on the current situation of the development of animation industry in China.

  13. Tailoring the Structure of Two-Dimensional Self-Assembled Nanoarchitectures Based on NiII–Salen Building Blocks

    DEFF Research Database (Denmark)

    Viciano-Chumillas, Marta; Li, Dongzhe; Smogunov, Alexander

    2014-01-01

    -butyl) is presented. Their electronic structure and self-assembly was studied. The organic ligands of the salen complexes are functionalized with peripheral carboxylic groups for driving molecular self-assembly through hydrogen bonding. In addition, other substituents, that is, tert-butyl and diamine bridges (2......, which remain unchanged. Scanning tunneling microscopy (STM) shows that the three complexes self-assemble into three different 2D nanoarchitectures at the solid–liquid interface on graphite. Two structures are porous and one is close-packed. These structures are stabilized by hydrogen bonds in one...

  14. Optimal excitation of two dimensional Holmboe instabilities

    CERN Document Server

    Constantinou, Navid C

    2010-01-01

    Highly stratified shear layers are rendered unstable even at high stratifications by Holmboe instabilities when the density stratification is concentrated in a small region of the shear layer. These instabilities may cause mixing in highly stratified environments. However these instabilities occur in tongues for a limited range of parameters. We perform Generalized Stability analysis of the two dimensional perturbation dynamics of an inviscid Boussinesq stratified shear layer and show that Holmboe instabilities at high Richardson numbers can be excited by their adjoints at amplitudes that are orders of magnitude larger than by introducing initially the unstable mode itself. We also determine the optimal growth that obtains for parameters for which there is no instability. We find that there is potential for large transient growth regardless of whether the background flow is exponentially stable or not and that the characteristic structure of the Holmboe instability asymptotically emerges for parameter values ...

  15. Probabilistic Universality in two-dimensional Dynamics

    CERN Document Server

    Lyubich, Mikhail

    2011-01-01

    In this paper we continue to explore infinitely renormalizable H\\'enon maps with small Jacobian. It was shown in [CLM] that contrary to the one-dimensional intuition, the Cantor attractor of such a map is non-rigid and the conjugacy with the one-dimensional Cantor attractor is at most 1/2-H\\"older. Another formulation of this phenomenon is that the scaling structure of the H\\'enon Cantor attractor differs from its one-dimensional counterpart. However, in this paper we prove that the weight assigned by the canonical invariant measure to these bad spots tends to zero on microscopic scales. This phenomenon is called {\\it Probabilistic Universality}. It implies, in particular, that the Hausdorff dimension of the canonical measure is universal. In this way, universality and rigidity phenomena of one-dimensional dynamics assume a probabilistic nature in the two-dimensional world.

  16. Rationally synthesized two-dimensional polymers.

    Science.gov (United States)

    Colson, John W; Dichtel, William R

    2013-06-01

    Synthetic polymers exhibit diverse and useful properties and influence most aspects of modern life. Many polymerization methods provide linear or branched macromolecules, frequently with outstanding functional-group tolerance and molecular weight control. In contrast, extending polymerization strategies to two-dimensional periodic structures is in its infancy, and successful examples have emerged only recently through molecular framework, surface science and crystal engineering approaches. In this Review, we describe successful 2D polymerization strategies, as well as seminal research that inspired their development. These methods include the synthesis of 2D covalent organic frameworks as layered crystals and thin films, surface-mediated polymerization of polyfunctional monomers, and solid-state topochemical polymerizations. Early application targets of 2D polymers include gas separation and storage, optoelectronic devices and membranes, each of which might benefit from predictable long-range molecular organization inherent to this macromolecular architecture.

  17. Two-dimensional fourier transform spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    DeFlores, Lauren; Tokmakoff, Andrei

    2016-10-25

    The present invention relates to a system and methods for acquiring two-dimensional Fourier transform (2D FT) spectra. Overlap of a collinear pulse pair and probe induce a molecular response which is collected by spectral dispersion of the signal modulated probe beam. Simultaneous collection of the molecular response, pulse timing and characteristics permit real time phasing and rapid acquisition of spectra. Full spectra are acquired as a function of pulse pair timings and numerically transformed to achieve the full frequency-frequency spectrum. This method demonstrates the ability to acquire information on molecular dynamics, couplings and structure in a simple apparatus. Multi-dimensional methods can be used for diagnostic and analytical measurements in the biological, biomedical, and chemical fields.

  18. Two-dimensional fourier transform spectrometer

    Science.gov (United States)

    DeFlores, Lauren; Tokmakoff, Andrei

    2013-09-03

    The present invention relates to a system and methods for acquiring two-dimensional Fourier transform (2D FT) spectra. Overlap of a collinear pulse pair and probe induce a molecular response which is collected by spectral dispersion of the signal modulated probe beam. Simultaneous collection of the molecular response, pulse timing and characteristics permit real time phasing and rapid acquisition of spectra. Full spectra are acquired as a function of pulse pair timings and numerically transformed to achieve the full frequency-frequency spectrum. This method demonstrates the ability to acquire information on molecular dynamics, couplings and structure in a simple apparatus. Multi-dimensional methods can be used for diagnostic and analytical measurements in the biological, biomedical, and chemical fields.

  19. Tamm-plasmon and surface-plasmon hybrid-mode based refractometry in photonic bandgap structures.

    Science.gov (United States)

    Das, Ritwick; Srivastava, Triranjita; Jha, Rajan

    2014-02-15

    The transverse magnetic (TM) polarized hybrid modes formed as a consequence of coupling between Tamm plasmon polariton (TM-TPP) mode and surface plasmon polariton (SPP) mode exhibit interesting dispersive features for realizing a highly sensitive and accurate surface plasmon resonance (SPR) sensor. We found that the TM-TPP modes, formed at the interface of distributed Bragg reflector and metal, are strongly dispersive as compared to SPP modes at optical frequencies. This causes an appreciably narrow interaction bandwidth between TM-TPP and SPP modes, which leads to highly accurate sensing. In addition, appropriate tailoring of dispersion characteristics of TM-TPP as well as SPP modes could ensure high sensitivity of a novel SPR platform. By suitably designing the Au/TiO₂/SiO₂-based geometry, we propose a TM-TPP/SPP hybrid-mode sensor and achieve a sensitivity ≥900  nm/RIU with high detection accuracy (≥30  μm⁻¹) for analyte refractive indices varying between 1.330 and 1.345 in 600-700 nm wavelength range. The possibility to achieve desired dispersive behavior in any spectral band makes the sensing configuration an extremely attractive candidate to design sensors depending on the availability of optical sources.

  20. Coherent optical nonlinearities and phase relaxation of quasi-three-dimensional and quasi-two-dimensional excitons in ZnSxSe1 - x/ZnSe structures

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Schätz, A.; Maier, R.

    1997-01-01

    We investigate the dephasing of heavy-hole excitons in different free-standing ZnSxSe1-x/ZnSe layer structures by spectrally resolved transient four-wave mixing. ZnSe layers of 80, 8, and 4 nm thickness with ternary barriers are studied, representing the crossover from quasi-three-dimensional to ......We investigate the dephasing of heavy-hole excitons in different free-standing ZnSxSe1-x/ZnSe layer structures by spectrally resolved transient four-wave mixing. ZnSe layers of 80, 8, and 4 nm thickness with ternary barriers are studied, representing the crossover from quasi...

  1. Synthesis, crystal structure, and proton conductivity of one-dimensional, two-dimensional, and three-dimensional zirconium phosphonates based on glyphosate and glyphosine.

    Science.gov (United States)

    Taddei, Marco; Donnadio, Anna; Costantino, Ferdinando; Vivani, Riccardo; Casciola, Mario

    2013-10-21

    The reaction of two small phosphono-amino acids based on glycine (glyphosine and glyphosate) with zirconium under mild conditions led to the attainment of three related zirconium derivatives with 1D, 2D, and 3D structures of formulas ZrF[H3(O3PCH2NHCH2COO)2] (1), Zr3H8[(O3PCH2)2NCH2COO]4·2H2O (2), and Zr[(O3PCH2)(HO3PCH2)NHCH2COOH]2·2H2O (3), respectively, whose structures were solved by X-ray powder and single-crystal diffraction data. The glyphosate derivative has 1D ribbon-type structure whereas the dimensionality of the glyphosine-derived materials (2D and 3D) can be tuned by changing the synthesis conditions. The low-dimensional compounds (1 and 2) can be directly produced in the form of nanoparticles with different size and morphology whereas the 3D compound (3) has a higher crystallinity and can be obtained as single crystals with a prismatic shape. The different structural dimensionality reflects the shape and size of the crystals and also differently affects the proton conductivity properties, measured over a wide range of temperature at 95% relative humidity. Their high thermal and chemical stability together with the small size may promote their use as fillers for polymeric electrolyte membranes for fuel cells applications.

  2. Evidence for Intramolecular Antiparallel Beta-Sheet Structure in Alpha-Synuclein Fibrils from a Combination of Two-Dimensional Infrared Spectroscopy and Atomic Force Microscopy

    NARCIS (Netherlands)

    Roeters, Steven J.; Iyer, Aditya; Pletikapic, Galja; Kogan, Vladimir; Subramaniam, Vinod; Woutersen, Sander

    2017-01-01

    The aggregation of the intrinsically disordered protein alpha-synuclein (αS) into amyloid fibrils is thought to play a central role in the pathology of Parkinson’s disease. Using a combination of techniques (AFM, UV-CD, XRD, and amide-I 1D- and 2D-IR spectroscopy) we show that the structure of αS fi

  3. Improved two-dimensional electron mobility in asymmetric barrier delta-doped GaAs/AlGaAs modulation-doped field-effect transistor structures

    Science.gov (United States)

    Das, Sudhakar; Mohapatra, Meryleen; Nayak, Rasmita K.; Panda, Ajit K.; Sahu, Trinath

    2017-03-01

    We study the enhancement of electron mobility μ in barrier delta-doped GaAs/AlGaAs quantum-well-based modulation-doped field-effect transistor (MODFET) structures. We asymmetrically vary the doping concentrations N d1 and N d2 in the barriers on the substrate and surface sides, respectively, to obtain a nonlinear enhancement of μ as a function of the well width w through multi-subband effects. We show that an increase in doping concentration increases the surface electron density N s, which in turn enhances μ. Interchanging N d1 and N d2 leads to no change in N s but rather, an enhancement of μ as a function of w for N d2 > N d1 owing to asymmetric variation of subband wave functions, thereby implying a higher channel conductivity in a surface-doped structure than in an inverted doped structure. By keeping (N d1 + N d2) unchanged, the conductivity of a single-channel MODFET, N d1 (N d2) ≠ 0 and N d2 (N d1) = 0, can be enhanced by considering a MODFET based on an asymmetrically doped (N d1 ≠ N d2 ≠ 0) quantum well structure. We show that the highest N s and μ product for these structures occurs almost before the onset of the occupation of the second subband. Our analysis of the effect of asymmetric doping profiles on channel conductivity can be utilized for the performance improvement of MODFET-like devices.

  4. Crystal Structure And Magnetic Property of the Complex of Hydrogen-bonded Two-dimensional Layer Copper(Ⅱ) Acrylate with Trimethyl Phosphate

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@ Copper carboxylate complexes play an important role in catalysing the enzymatic activities[1-4], and the phosphate has an especial use in DNA recognition[5]. Indeed the report about copper carboxylate complexes with phosphate ligands is rare. A chain structure supramolecule [Cu2(CH2CH-COO)4(H2O)2]n has been reported recently[6], in which a Cu2(CH2CH-COO)4(H2O)2 unit is linked by four O(water)-H...O(carboxyl) hydrogen bonds with two adjacent units(Fig.1). In this work a layer structure complex {Cu2(CH2CH-COO)4(H2O)2[OP(OCH3)3]}n was synthesized by means of hydrogen-bonded assembly approach between complex [Cu2(CH2CH-COO)4(H2O)2]n with trimethyl phosphate(TMP).

  5. Evidence for Intramolecular Antiparallel Beta-Sheet Structure in Alpha-Synuclein Fibrils from a Combination of Two-Dimensional Infrared Spectroscopy and Atomic Force Microscopy

    Science.gov (United States)

    Roeters, Steven J.; Iyer, Aditya; Pletikapić, Galja; Kogan, Vladimir; Subramaniam, Vinod; Woutersen, Sander

    2017-01-01

    The aggregation of the intrinsically disordered protein alpha-synuclein (αS) into amyloid fibrils is thought to play a central role in the pathology of Parkinson’s disease. Using a combination of techniques (AFM, UV-CD, XRD, and amide-I 1D- and 2D-IR spectroscopy) we show that the structure of αS fibrils varies as a function of ionic strength: fibrils aggregated in low ionic-strength buffers ([NaCl] ≤ 25 mM) have a significantly different structure than fibrils grown in higher ionic-strength buffers. The observations for fibrils aggregated in low-salt buffers are consistent with an extended conformation of αS molecules, forming hydrogen-bonded intermolecular β-sheets that are loosely packed in a parallel fashion. For fibrils aggregated in high-salt buffers (including those prepared in buffers with a physiological salt concentration) the measurements are consistent with αS molecules in a more tightly-packed, antiparallel intramolecular conformation, and suggest a structure characterized by two twisting stacks of approximately five hydrogen-bonded intermolecular β-sheets each. We find evidence that the high-frequency peak in the amide-I spectrum of αS fibrils involves a normal mode that differs fundamentally from the canonical high-frequency antiparallel β-sheet mode. The high sensitivity of the fibril structure to the ionic strength might form the basis of differences in αS-related pathologies.

  6. Structural determination of oligosaccharides derived from lipooligosaccharide of Neisseria gonorrhoeae F62 by chemical, enzymatic, and two-dimensional NMR methods

    Energy Technology Data Exchange (ETDEWEB)

    Yamasaki, Ryohei; Nasholds, W.; Griffiss, J.M. (Univ. of California, San Francisco (United States) Veterans Administration Medical Center, San Francisco, CA (United States)); Bacon, B.E. (Veterans Administration Medical Center, San Francisco (United States)); Schneider, H. (Walter Reed Research Inst., Washington, DC (United States))

    1991-10-29

    F62 LOS of Neisseria gonorrhoeae consists of two major LOS components; the higher and smaller molecular weight (MW) components were recognized by MAbs 1-1-M and 3F11 respectively. Base-line separation of the two major oligosaccharide (OS) components from F62 LOS was achieved by Bio-Gel P-4 chromatography after dephosphorylation of the OS mixture. The structures of the two major OSs were studied by chemical, enzymatic, and 2D NMR methods as well as methylation followed by GC/MS analysis. The OS component derived from the MAb 1-1-M defined LOS component was determined to have a V{sup 3}-({beta}-N-acetylgalactosaminyl)neolactotetraose structure at one of its nonreducing termini. The OS component derived from the MAb 3F11 defined LOS component did not have a GalNAc residue. The rest of its structure was identical to that of the OS-1, and a neolactotetraose is exposed at its nonreducing terminus.

  7. A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

    Science.gov (United States)

    Hesse, Michael; Birn, Joachim; Schindler, Karl

    1990-01-01

    A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

  8. Strongly interacting two-dimensional Dirac fermions

    NARCIS (Netherlands)

    Lim, L.K.; Lazarides, A.; Hemmerich, Andreas; de Morais Smith, C.

    2009-01-01

    We show how strongly interacting two-dimensional Dirac fermions can be realized with ultracold atoms in a two-dimensional optical square lattice with an experimentally realistic, inherent gauge field, which breaks time reversal and inversion symmetries. We find remarkable phenomena in a temperature

  9. Topology optimization of two-dimensional waveguides

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Sigmund, Ole

    2003-01-01

    In this work we use the method of topology optimization to design two-dimensional waveguides with low transmission loss.......In this work we use the method of topology optimization to design two-dimensional waveguides with low transmission loss....

  10. The Two-dimensional Electromagnetic Scattering from Periodic Chiral Structures and Its Finite Element Approximation%周期手性介质中二维电磁散射问题及有限元逼近

    Institute of Scientific and Technical Information of China (English)

    张德悦; 马富明

    2004-01-01

    In this paper, we consider the electromagnetic scattering from periodic chiral structures. The structure is periodic in one direction and invariant in another direction. The electromagnetic fields in the chiral medium are governed by the Maxwell equations together with the Drude-Born-Fedorov equations. We simplify the problem to a two-dimensional scattering problem and we show that for all but possibly a discrete set of wave numbers, there is a unique quasi-periodic weak solution to the diffraction problem. The diffraction problem can be solved by finite element method. We also establish uniform error estimates for the finite element method and the error estimates when the truncation of the nonlocal transparent boundary operators takes place.

  11. An Evaluation of Recently Developed RANS-Based Turbulence Models for Flow Over a Two-Dimensional Block Subjected to Different Mesh Structures and Grid Resolutions

    Science.gov (United States)

    Kardan, Farshid; Cheng, Wai-Chi; Baverel, Olivier; Porté-Agel, Fernando

    2016-04-01

    Understanding, analyzing and predicting meteorological phenomena related to urban planning and built environment are becoming more essential than ever to architectural and urban projects. Recently, various version of RANS models have been established but more validation cases are required to confirm their capability for wind flows. In the present study, the performance of recently developed RANS models, including the RNG k-ɛ , SST BSL k-ω and SST ⪆mma-Reθ , have been evaluated for the flow past a single block (which represent the idealized architecture scale). For validation purposes, the velocity streamlines and the vertical profiles of the mean velocities and variances were compared with published LES and wind tunnel experiment results. Furthermore, other additional CFD simulations were performed to analyze the impact of regular/irregular mesh structures and grid resolutions based on selected turbulence model in order to analyze the grid independency. Three different grid resolutions (coarse, medium and fine) of Nx × Ny × Nz = 320 × 80 × 320, 160 × 40 × 160 and 80 × 20 × 80 for the computational domain and nx × nz = 26 × 32, 13 × 16 and 6 × 8, which correspond to number of grid points on the block edges, were chosen and tested. It can be concluded that among all simulated RANS models, the SST ⪆mma-Reθ model performed best and agreed fairly well to the LES simulation and experimental results. It can also be concluded that the SST ⪆mma-Reθ model provides a very satisfactory results in terms of grid dependency in the fine and medium grid resolutions in both regular and irregular structure meshes. On the other hand, despite a very good performance of the RNG k-ɛ model in the fine resolution and in the regular structure grids, a disappointing performance of this model in the coarse and medium grid resolutions indicates that the RNG k-ɛ model is highly dependent on grid structure and grid resolution. These quantitative validations are essential

  12. Simulating three-dimensional seismograms in 2.5-dimensional structures by combining two-dimensional finite difference modelling and ray tracing

    Science.gov (United States)

    Miksat, J.; Müller, T. M.; Wenzel, F.

    2008-07-01

    Finite difference (FD) simulation of elastic wave propagation is an important tool in geophysical research. As large-scale 3-D simulations are only feasible on supercomputers or clusters, and even then the simulations are limited to long periods compared to the model size, 2-D FD simulations are widespread. Whereas in generally 3-D heterogeneous structures it is not possible to infer the correct amplitude and waveform from 2-D simulations, in 2.5-D heterogeneous structures some inferences are possible. In particular, Vidale & Helmberger developed an approach that simulates 3-D waveforms using 2-D FD experiments only. However, their method requires a special FD source implementation technique that is based on a source definition which is not any longer used in nowadays FD codes. In this paper, we derive a conversion between 2-D and 3-D Green tensors that allows us to simulate 3-D displacement seismograms using 2-D FD simulations and the actual ray path determined in the geometrical optic limit. We give the conversion for a source of a certain seismic moment that is implemented by incrementing the components of the stress tensor. Therefore, we present a hybrid modelling procedure involving 2-D FD and kinematic ray-tracing techniques. The applicability is demonstrated by numerical experiments of elastic wave propagation for models of different complexity.

  13. Hydrothermal Synthesis and Structure of a New Two- dimensional Zincophosphite:Zn2(HPO3)3(H2DACH (DACH = 1,2-diaminocyclohexane)

    Institute of Scientific and Technical Information of China (English)

    潘建新; 郑寿添; 杨国昱

    2004-01-01

    A new open-framework zincophosphite, Zn2(HPO3)3(H2DACH 1, was hydrothermally synthesized in the presence of 1,2-diaminocyclohexane (DACH) as structure-directing agent. Its structure was determined by single-crystal X-ray diffraction and further characterized by FTIR, elemental analysis, powder X-ray diffraction and thermogravimetric analysis. Crystal data for 1: Mr = 486.88, monoclinic, space group P21/c with a = 10.2287(11), b = 9.7624(11), c = 16.1686(18) A,β = 92.573(2), V = 1612.9(3) A3, Z = 4, Dc = 2.005 g/cm3, F(000) = 984, μ = 3.314 mm-1 and S = 1.152. The final R = 0.0473 and wR = 0.1121 for 2456 observed reflections with I > 2σ(I). The inorganic layer consisting of four- and eight-membered rings is constructed of alternating ZnO4 tetrahedra and HPO3 pseudo pyramids by sharing vertices. The organic template molecules reside in the interlayer region and interact with the inorganic network through H-bonds.

  14. Tunable electronic structure in stained two dimensional van der Waals g-C2N/XSe2 (X = Mo, W) heterostructures

    Science.gov (United States)

    Zheng, Z. D.; Wang, X. C.; Mi, W. B.

    2017-10-01

    The electronic structure of the strained g-C2N/XSe2 (X=Mo, W) van der Waals heterostructures are investigated by first-principles calculations. The g-C2N/MoSe2 heterostructure is an indirect band gap semiconductor at a strain from 0% to 8%, where its band gap is 0.66, 0.61, 0.73, 0.60 and 0.33 eV. At K point, the spin splitting is 186, 181, 39, 13 and 9 meV, respectively. For g-C2N/WSe2 heterostructures, the band gap is 0.32, 0.37, 0.42, 0.45 and 0.36 eV, and the conduction band minimum is shifted from Г-M region to K-Г region as the strain increases from 0% to 8%. Its spin splitting monotonically decreases as a strain raises to 8%, which is 445, 424, 261, 111 and 96 meV, respectively. Moreover, at a strain less than 4%, the conduction band mainly comes from g-C2N, but it comes from XSe2 (X=Mo, W) above 6%. Our results show that the g-C2N/XSe2 heterostructures have tunable electronic structures, which makes it a potential candidate for novel electronic devices.

  15. Predicting Two-Dimensional Silicon Carbide Monolayers.

    Science.gov (United States)

    Shi, Zhiming; Zhang, Zhuhua; Kutana, Alex; Yakobson, Boris I

    2015-10-27

    Intrinsic semimetallicity of graphene and silicene largely limits their applications in functional devices. Mixing carbon and silicon atoms to form two-dimensional (2D) silicon carbide (SixC1-x) sheets is promising to overcome this issue. Using first-principles calculations combined with the cluster expansion method, we perform a comprehensive study on the thermodynamic stability and electronic properties of 2D SixC1-x monolayers with 0 ≤ x ≤ 1. Upon varying the silicon concentration, the 2D SixC1-x presents two distinct structural phases, a homogeneous phase with well dispersed Si (or C) atoms and an in-plane hybrid phase rich in SiC domains. While the in-plane hybrid structure shows uniform semiconducting properties with widely tunable band gap from 0 to 2.87 eV due to quantum confinement effect imposed by the SiC domains, the homogeneous structures can be semiconducting or remain semimetallic depending on a superlattice vector which dictates whether the sublattice symmetry is topologically broken. Moreover, we reveal a universal rule for describing the electronic properties of the homogeneous SixC1-x structures. These findings suggest that the 2D SixC1-x monolayers may present a new "family" of 2D materials, with a rich variety of properties for applications in electronics and optoelectronics.

  16. Synthesis and Crystal Structure of a Two-dimensional Silver Framework Constructed by H2idc (H2idc = Iminodiacetic Acid)

    Institute of Scientific and Technical Information of China (English)

    LIN Xiu-E; CAO Rong; WANG Yan-Qin; LI Xiao-Ju; BI Wen-Hua; YUAN Da-Qiang

    2005-01-01

    A new compound formulated [Ag2(idc)](NO3)(H2O (H2idc = iminodiacetic acid) was synthesized under mild conditions and characterized by IR spectrum and single-crystal X-ray diffraction. The crystal crystallizes in the monoclinic system, space group of P21/n with a = 5.5029(2), b = 11.1316(5), c = 15.5319 (1) (A), β = 96.038(3)°, V = 946.15(6) (A)3, Z = 4, R = 0.0619 and wR = 0.1606. Its structure is a 2D polymer, whose repeat units consist of dinuclear silver cluster coordinated by two bridging iminodiacetic acids. In the complex, the Ag(I) ions adopt three coordinate fashions, and the Ag-Ag metal-metal contacts of 2.8418 (A) are observed.

  17. Efficient excitation of photoluminescence in a two-dimensional waveguide consisting of a quantum dot-polymer sandwich-type structure.

    Science.gov (United States)

    Suárez, I; Larrue, A; Rodríguez-Cantó, P J; Almuneau, G; Abargues, R; Chirvony, V S; Martínez-Pastor, J P

    2014-08-15

    In this Letter, we study a new kind of organic polymer waveguide numerically and experimentally by combining an ultrathin (10-50 nm) layer of compactly packed CdSe/ZnS core/shell colloidal quantum dots (QDs) sandwiched between two cladding poly(methyl methacrylate) (PMMA) layers. When a pumping laser beam is coupled into the waveguide edge, light is mostly confined around the QD layer, improving the efficiency of excitation. Moreover, the absence of losses in the claddings allows the propagation of the pumping laser beam along the entire waveguide length; hence, a high-intensity photoluminescence (PL) is produced. Furthermore, a novel fabrication technology is developed to pattern the PMMA into ridge structures by UV lithography in order to provide additional light confinement. The sandwich-type waveguide is analyzed in comparison to a similar one formed by a PMMA film homogeneously doped by the same QDs. A 100-fold enhancement in the waveguided PL is found for the sandwich-type case due to the higher concentration of QDs inside the waveguide.

  18. Nonequilibrium structures and slow dynamics in a two-dimensional spin system with competing long-range and short-range interactions.

    Science.gov (United States)

    Osenda, Omar; Tamarit, Francisco A; Cannas, Sergio A

    2009-08-01

    We present a lattice spin model that mimics a system of interacting particles through a short-range repulsive potential and a long-range attractive power-law decaying potential. We perform a detailed analysis of the general equilibrium phase diagram of the model at finite temperature, showing that the only possible equilibrium phases are the ferromagnetic and the antiferromagnetic ones. We then study the nonequilibrium behavior of the model after a quench to subcritical temperatures, in the antiferromagnetic region of the phase diagram region, where the pair interaction potential behaves in the same qualitative way as in a Lennard-Jones gas. We find that even in the absence of quenched disorder or geometric frustration, the competition between interactions gives rise to nonequilibrium disordered structures at low enough temperatures that strongly slow down the relaxation of the system. This nonequilibrium state presents several features characteristic of glassy systems such as subaging, nontrivial fuctuation dissipation relations, and possible logarithmic growth of free-energy barriers to coarsening.

  19. Spectral Radiative Properties of Two-Dimensional Rough Surfaces

    Science.gov (United States)

    Xuan, Yimin; Han, Yuge; Zhou, Yue

    2012-12-01

    Spectral radiative properties of two-dimensional rough surfaces are important for both academic research and practical applications. Besides material properties, surface structures have impact on the spectral radiative properties of rough surfaces. Based on the finite difference time domain algorithm, this paper studies the spectral energy propagation process on a two-dimensional rough surface and analyzes the effect of different factors such as the surface structure, angle, and polarization state of the incident wave on the spectral radiative properties of the two-dimensional rough surface. To quantitatively investigate the spatial distribution of energy reflected from the rough surface, the concept of the bidirectional reflectance distribution function is introduced. Correlation analysis between the reflectance and different impact factors is conducted to evaluate the influence degree. Comparison between the theoretical and experimental data is given to elucidate the accuracy of the computational code. This study is beneficial to optimizing the surface structures of optoelectronic devices such as solar cells.

  20. 领导成熟度二维结构及其实证研究%The Two-Dimensional Structure of Leadership Maturity and Its Empirical Analysis

    Institute of Scientific and Technical Information of China (English)

    王宝荣; 刘瑜

    2013-01-01

    Research on leadership maturity can not only enrich the theories of management competency and leadership effectiveness , but also contribute to the solutions in management practice like the selection and training of outstanding leaders , the change of leadership style and the improvement of leadership efficiency .Leadership maturity can be ex-plained by six competency characteristics .Using factor analysis , we found that the leadership maturity model consisted of two dimensions:environmental adaptability and internal coordination .Applying structural equation method to analyze 257 samples , this study confirmed that almost all the primary model fit indices reached the criterion and the presumptive mod -el agreed well with the data .%开展领导成熟度的研究既能丰富管理胜任力、领导有效性理论,也有助于解决管理实践中提出的如何选拔培养优秀的领导者,如何转变领导方式,如何提高领导效能等问题。领导成熟度可通过6项管理胜任力特征表现出来,因子分析的结果表明领导成熟度存在环境适应性和内在协调性两个维度。本文利用结构方程对257个样本进行验证性分析,证实各项主要适配指标均达到标准,假设模型与数据能够很好地契合。

  1. Modern plasmonics

    CERN Document Server

    Maradudin, Alexei A; Barnes, William L

    2014-01-01

    Plasmonics is entering the curriculum of many universities, either as a stand alone subject, or as part of some course or courses. Nanotechnology institutes have been, and are being, established in universities, in which plasmonics is a significant topic of research. Modern Plasmonics book offers a comprehensive presentation of the properties of surface plasmon polaritons, in systems of different structures and various natures, e.g. active, nonlinear, graded, theoretical/computational and experimental techniques for studying them, and their use in a variety of applications. Contains materia

  2. Active Control of Nitride Plasmonic Dispersion in the Far Infrared.

    Energy Technology Data Exchange (ETDEWEB)

    Shaner, Eric A.; Dyer, Gregory Conrad; Seng, William Francis; Bethke, Donald Thomas; Grine, Albert Dario,; Baca, Albert G.; Allerman, Andrew A.

    2014-11-01

    We investigate plasmonic structures in nitride-based materials for far-infrared (IR) applications. The two dimensional electron gas (2DEG) in the GaN/AlGaN material system, much like metal- dielectric structures, is a patternable plasmonic medium. However, it also permits for direct tunability via an applied voltage. While there have been proof-of-principle demonstrations of plasma excitations in nitride 2DEGs, exploration of the potential of this material system has thus far been limited. We recently demonstrated coherent phenomena such as the formation of plasmonic crystals, strong coupling of tunable crystal defects to a plasmonic crystal, and electromagnetically induced transparency in GaAs/AlGaAs 2DEGs at sub-THz frequencies. In this project, we explore whether these effects can be realized in nitride 2DEG materials above 1 THz and at temperatures exceeding 77 K.

  3. 3D plasmonic nanostar structures for recyclable SERS applications

    DEFF Research Database (Denmark)

    Chirumamilla, Manohar; Gopalakrishnan, Anisha; Toma, Andrea;

    2015-01-01

    Nanofabrication of metallic nanostructures/nanoparticles enables the detection of analyte molecules at ultra-low concentrations with the aid of plasmon induced hot-spots. The high fabrication cost and large fabrication time of nanostructures limit their usage in practical applications. Here we pr...

  4. Bend loss in surface plasmon polariton band-gap structures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S.I.; Volkov, V.S.; Leosson, Kristjan

    2001-01-01

    Using near-field optical microscopy, we investigate propagation of surface plasmon polaritons (SPPs) excited in the wavelength range of 720-830 nm at a corrugated gold-film surface with areas of 200-nm-wide and 45-nm-high scatterers arranged in a 410-nm-period triangular lattice containing line...

  5. Collective phenomena in photonic, plasmonic and hybrid structures.

    Science.gov (United States)

    Boriskina, Svetlana V; Povinelli, Michelle; Astratov, Vasily N; Zayats, Anatoly V; Podolskiy, Viktor A

    2011-10-24

    Preface to a focus issue of invited articles that review recent progress in studying the fundamental physics of collective phenomena associated with coupling of confined photonic, plasmonic, electronic and phononic states and in exploiting these phenomena to engineer novel devices for light generation, optical sensing, and information processing. © 2011 Optical Society of America

  6. A method for reduction of propagation loss of surface plasmons. Experimental demonstration of the loss reduction for Fe/MgO/AlGaAs plasmonic structure integrated with AlGaAs/GaAs optical waveguide

    CERN Document Server

    Zayets, V; Ando, K; Yuasa, S

    2015-01-01

    A method for the substantial reduction of propagation loss of surface plasmons was proposed and experimentally demonstrated. The method is based on the fact that the propagation loss of the surface plasmons depends significantly on the optical confinement of the plasmon. A plasmonic structure, which contains a metal and two dielectric layers of different refractive indexes, is proposed in order to optimize optical confinement and to reduce propagation loss of the surface plasmons. A low propagation loss of 0.17 dB/um for a surface plasmon in a Fe/MgO/AlGaAs plasmonic structure was achieved. A good coupling efficiency of 2.2 dB/facet between a surface plasmon in Fe/MgO/AlGaAs and a waveguide mode in AlGaAs/GaAs optical waveguide was demonstrated.

  7. Analysis of surface plasmon waves in metaldielectric- metal structures and the criterion for negative refractive index.

    Science.gov (United States)

    Yang, Tian; Crozier, Kenneth B

    2009-01-19

    Surface plasmon waves in metal-dielectric-metal structures have been theoretically examined. Because of the existence of evanescent waves that can have comparable or smaller decay rates than the propagating waves, the sign of dispersion does not necessarily indicate the sign of effective refractive index for these structures. By using the direction of energy decay to distinguish the sign of index, we have obtained different results and insights from previous reports. We also propose an approach to increase the bandwidth and decrease the loss of negative index surface Plasmon propagation in the MDM structure, by simply changing the properties of its dielectric layer.

  8. Perspective: Two-dimensional resonance Raman spectroscopy

    Science.gov (United States)

    Molesky, Brian P.; Guo, Zhenkun; Cheshire, Thomas P.; Moran, Andrew M.

    2016-11-01

    Two-dimensional resonance Raman (2DRR) spectroscopy has been developed for studies of photochemical reaction mechanisms and structural heterogeneity in complex systems. The 2DRR method can leverage electronic resonance enhancement to selectively probe chromophores embedded in complex environments (e.g., a cofactor in a protein). In addition, correlations between the two dimensions of the 2DRR spectrum reveal information that is not available in traditional Raman techniques. For example, distributions of reactant and product geometries can be correlated in systems that undergo chemical reactions on the femtosecond time scale. Structural heterogeneity in an ensemble may also be reflected in the 2D spectroscopic line shapes of both reactive and non-reactive systems. In this perspective article, these capabilities of 2DRR spectroscopy are discussed in the context of recent applications to the photodissociation reactions of triiodide and myoglobin. We also address key differences between the signal generation mechanisms for 2DRR and off-resonant 2D Raman spectroscopies. Most notably, it has been shown that these two techniques are subject to a tradeoff between sensitivity to anharmonicity and susceptibility to artifacts. Overall, recent experimental developments and applications of the 2DRR method suggest great potential for the future of the technique.

  9. Effects of intermediate plasmonic structures on the performance of ultra-thin-film tandem solar cells

    Science.gov (United States)

    Mashooq, Kishwar; Talukder, Muhammad Anisuzzaman

    2017-02-01

    Although solar cells can meet the increasing demand for energy of modern world, their usage is not as widespread as expected because of their high production cost and low efficiency. Thin-film and ultra-thin-film solar cells with single and multiple active layers are being investigated to reduce cost. Additionally, multiple active layers of different energy bandgaps are used in tandem in order to absorb the solar spectra more efficiently. However, the efficiency of ultra-thin-film tandem solar cells may suffer significantly mainly because of low photon absorption and current mismatch between active layers. In this work, we study the effects of intermediate plasmonic structures on the performance of ultra-thin-film tandem solar cells. We consider three structures| each with a top amorphous silicon layer and a bottom micro-crystalline silicon layer, and an intermediate plasmonic layer between them. The intermediate layer is either a metal layer with periodic holes or periodic metal strips or periodic metal nano-clusters. Using a finite difference time domain technique for incident AM 1.5 solar spectra, we show that these intermediate layers help to excite different plasmonic and photonic modes for different light polarizations, and thereby, increase the absorption of light significantly. We find that the short-circuit current density increases by 12%, 6%, and 9% when the intermediate plasmonic structure is a metal hole-array, strips, and nano-clusters, respectively, from that of a structure that does not have the intermediate plasmonic layer.

  10. An optimized surface plasmon photovoltaic structure using energy transfer between discrete nano-particles.

    Science.gov (United States)

    Lin, Albert; Fu, Sze-Ming; Chung, Yen-Kai; Lai, Shih-Yun; Tseng, Chi-Wei

    2013-01-14

    Surface plasmon enhancement has been proposed as a way to achieve higher absorption for thin-film photovoltaics, where surface plasmon polariton(SPP) and localized surface plasmon (LSP) are shown to provide dense near field and far field light scattering. Here it is shown that controlled far-field light scattering can be achieved using successive coupling between surface plasmonic (SP) nano-particles. Through genetic algorithm (GA) optimization, energy transfer between discrete nano-particles (ETDNP) is identified, which enhances solar cell efficiency. The optimized energy transfer structure acts like lumped-element transmission line and can properly alter the direction of photon flow. Increased in-plane component of wavevector is thus achieved and photon path length is extended. In addition, Wood-Rayleigh anomaly, at which transmission minimum occurs, is avoided through GA optimization. Optimized energy transfer structure provides 46.95% improvement over baseline planar cell. It achieves larger angular scattering capability compared to conventional surface plasmon polariton back reflector structure and index-guided structure due to SP energy transfer through mode coupling. Via SP mediated energy transfer, an alternative way to control the light flow inside thin-film is proposed, which can be more efficient than conventional index-guided mode using total internal reflection (TIR).

  11. Two-Dimensional Planetary Surface Lander

    Science.gov (United States)

    Hemmati, H.; Sengupta, A.; Castillo, J.; McElrath, T.; Roberts, T.; Willis, P.

    2014-06-01

    A systems engineering study was conducted to leverage a new two-dimensional (2D) lander concept with a low per unit cost to enable scientific study at multiple locations with a single entry system as the delivery vehicle.

  12. Plasmonic formation mechanism of periodic 100-nm-structures upon femtosecond laser irradiation of silicon in water

    Science.gov (United States)

    Derrien, T. J.-Y.; Koter, R.; Krüger, J.; Höhm, S.; Rosenfeld, A.; Bonse, J.

    2014-08-01

    The formation of laser-induced periodic surface structures (LIPSS) upon irradiation of silicon by multiple (N = 100) linearly polarized Ti:sapphire femtosecond laser pulses (duration τ = 30 fs, center wavelength λ0 ˜ 790 nm) is studied experimentally in air and water environment. The LIPSS surface morphologies are characterized by scanning electron microscopy and their spatial periods are quantified by two-dimensional Fourier analyses. It is demonstrated that the irradiation environment significantly influences the periodicity of the LIPSS. In air, so-called low-spatial frequency LIPSS (LSFL) were found with periods somewhat smaller than the laser wavelength (ΛLSFL ˜ 0.7 × λ0) and an orientation perpendicular to the laser polarization. In contrast, for laser processing in water a reduced ablation threshold and LIPSS with approximately five times smaller periods ΛLIPSS ˜ 0.15 × λ0 were observed in the same direction as in air. The results are discussed within the frame of recent LIPSS theories and complemented by a thin film based surface plasmon polariton model, which successfully describes the tremendously reduced LIPSS periods in water.

  13. Plasmonic formation mechanism of periodic 100-nm-structures upon femtosecond laser irradiation of silicon in water

    Energy Technology Data Exchange (ETDEWEB)

    Derrien, T. J.-Y., E-mail: thibault.derrien@gmail.com; Koter, R.; Krüger, J.; Bonse, J., E-mail: joern.bonse@bam.de [BAM Bundesanstalt für Materialforschung und –prüfung, Unter den Eichen 87, D-12205 Berlin (Germany); Höhm, S.; Rosenfeld, A. [Max-Born-Institut für Nichtlineare Optik und Kurzzeitspektroskopie (MBI), Max-Born-Staße 2A, D-12489 Berlin (Germany)

    2014-08-21

    The formation of laser-induced periodic surface structures (LIPSS) upon irradiation of silicon by multiple (N = 100) linearly polarized Ti:sapphire femtosecond laser pulses (duration τ = 30 fs, center wavelength λ{sub 0} ∼ 790 nm) is studied experimentally in air and water environment. The LIPSS surface morphologies are characterized by scanning electron microscopy and their spatial periods are quantified by two-dimensional Fourier analyses. It is demonstrated that the irradiation environment significantly influences the periodicity of the LIPSS. In air, so-called low-spatial frequency LIPSS (LSFL) were found with periods somewhat smaller than the laser wavelength (Λ{sub LSFL} ∼ 0.7 × λ{sub 0}) and an orientation perpendicular to the laser polarization. In contrast, for laser processing in water a reduced ablation threshold and LIPSS with approximately five times smaller periods Λ{sub LIPSS} ∼ 0.15 × λ{sub 0} were observed in the same direction as in air. The results are discussed within the frame of recent LIPSS theories and complemented by a thin film based surface plasmon polariton model, which successfully describes the tremendously reduced LIPSS periods in water.

  14. Octave-wide photonic band gap in three-dimensional plasmonic Bragg structures and limitations of radiative coupling.

    Science.gov (United States)

    Taubert, Richard; Dregely, Daniel; Stroucken, Tineke; Christ, Andre; Giessen, Harald

    2012-02-21

    Radiative coupling between oscillators is one of the most fundamental subjects of research in optics, where particularly a Bragg-type arrangement is of interest and has already been applied to atoms and excitons in quantum wells. Here we explore this arrangement in a plasmonic structure. We observe the emergence of an octave-wide photonic band gap in the optical regime. Compared with atomic or excitonic systems, the coupling efficiency of the particle plasmons utilized here is several orders of magnitude larger and widely tunable by changing the size and geometry of the plasmonic nanowires. We are thus able to explore the regime where the coupling distance is even limited by the large radiative decay rate of the oscillators. This Bragg-stacked coupling scheme will open a new route for future plasmonic applications such as far-field coupling to quantum emitters without quenching, plasmonic cavity structures and plasmonic distributed gain schemes for spasers.

  15. Photodetectors based on graphene, other two-dimensional materials and hybrid systems.

    Science.gov (United States)

    Koppens, F H L; Mueller, T; Avouris, Ph; Ferrari, A C; Vitiello, M S; Polini, M

    2014-10-01

    Graphene and other two-dimensional materials, such as transition metal dichalcogenides, have rapidly established themselves as intriguing building blocks for optoelectronic applications, with a strong focus on various photodetection platforms. The versatility of these material systems enables their application in areas including ultrafast and ultrasensitive detection of light in the ultraviolet, visible, infrared and terahertz frequency ranges. These detectors can be integrated with other photonic components based on the same material, as well as with silicon photonic and electronic technologies. Here, we provide an overview and evaluation of state-of-the-art photodetectors based on graphene, other two-dimensional materials, and hybrid systems based on the combination of different two-dimensional crystals or of two-dimensional crystals and other (nano)materials, such as plasmonic nanoparticles, semiconductors, quantum dots, or their integration with (silicon) waveguides.

  16. Interference effects with surface plasmons

    NARCIS (Netherlands)

    Kuzmin, Nikolay Victorovich

    2008-01-01

    A surface plasmon is a purely two-dimensional electromagnetic excitation bound to the interface between metal and dielectric and quickly decaying away from it. A surface plasmon is able to concentrate light on sub-wavelength scales – a feature that is attractive for nano-photonics and integrated

  17. Radiation effects on two-dimensional materials

    Energy Technology Data Exchange (ETDEWEB)

    Walker, R.C. II; Robinson, J.A. [Department of Materials Science, Penn State, University Park, PA (United States); Center for Two-Dimensional Layered Materials, Penn State, University Park, PA (United States); Shi, T. [Department of Mechanical and Nuclear Engineering, Penn State, University Park, PA (United States); Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI (United States); Silva, E.C. [GlobalFoundries, Malta, NY (United States); Jovanovic, I. [Department of Nuclear Engineering and Radiological Sciences, University of Michigan, Ann Arbor, MI (United States)

    2016-12-15

    The effects of electromagnetic and particle irradiation on two-dimensional materials (2DMs) are discussed in this review. Radiation creates defects that impact the structure and electronic performance of materials. Determining the impact of these defects is important for developing 2DM-based devices for use in high-radiation environments, such as space or nuclear reactors. As such, most experimental studies have been focused on determining total ionizing dose damage to 2DMs and devices. Total dose experiments using X-rays, gamma rays, electrons, protons, and heavy ions are summarized in this review. We briefly discuss the possibility of investigating single event effects in 2DMs based on initial ion beam irradiation experiments and the development of 2DM-based integrated circuits. Additionally, beneficial uses of irradiation such as ion implantation to dope materials or electron-beam and helium-beam etching to shape materials have begun to be used on 2DMs and are reviewed as well. For non-ionizing radiation, such as low-energy photons, we review the literature on 2DM-based photo-detection from terahertz to UV. The majority of photo-detecting devices operate in the visible and UV range, and for this reason they are the focus of this review. However, we review the progress in developing 2DMs for detecting infrared and terahertz radiation. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Photodetectors based on two dimensional materials

    Science.gov (United States)

    Zheng, Lou; Zhongzhu, Liang; Guozhen, Shen

    2016-09-01

    Two-dimensional (2D) materials with unique properties have received a great deal of attention in recent years. This family of materials has rapidly established themselves as intriguing building blocks for versatile nanoelectronic devices that offer promising potential for use in next generation optoelectronics, such as photodetectors. Furthermore, their optoelectronic performance can be adjusted by varying the number of layers. They have demonstrated excellent light absorption, enabling ultrafast and ultrasensitive detection of light in photodetectors, especially in their single-layer structure. Moreover, due to their atomic thickness, outstanding mechanical flexibility, and large breaking strength, these materials have been of great interest for use in flexible devices and strain engineering. Toward that end, several kinds of photodetectors based on 2D materials have been reported. Here, we present a review of the state-of-the-art in photodetectors based on graphene and other 2D materials, such as the graphene, transition metal dichalcogenides, and so on. Project supported by the National Natural Science Foundation of China (Nos. 61377033, 61574132, 61504136) and the State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences.

  19. Soliton nanoantennas in two-dimensional arrays of quantum dots

    CERN Document Server

    Gligorić, G; Hadžievski, Lj; Slepyan, G Ya; Malomed, B A

    2015-01-01

    We consider two-dimensional (2D) arrays of self-organized semiconductor quantum dots (QDs) strongly interacting with electromagnetic field in the regime of Rabi oscillations. The QD array built of two-level states is modelled by two coupled systems of discrete nonlinear Schr\\"{o}dinger equations. Localized modes in the form of single-peaked fundamental and vortical stationary Rabi solitons and self-trapped breathers have been found. The results for the stability, mobility and radiative properties of the Rabi modes suggest a concept of a self-assembled 2D \\textit{% soliton-based nano-antenna}, which should be stable against imperfections In particular, we discuss the implementation of such a nano-antenna in the form of surface plasmon solitons in graphene, and illustrate possibilities to control their operation by means of optical tools.

  20. Laser Induced Periodic Surface Structures induced by surface plasmons coupled via roughness

    Science.gov (United States)

    Gurevich, E. L.; Gurevich, S. V.

    2014-05-01

    In this paper the formation mechanisms of the femtosecond laser-induced periodic surface structures (LIPSS) are discussed. One of the most frequently used theories explains the structures by interference between the incident laser beam and surface plasmon-polariton waves. The latter is most commonly attributed to the coupling of the incident laser light to the surface roughness. We demonstrate that this excitation of surface plasmons contradicts the results of laser-ablation experiments. As an alternative approach to the excitation of LIPSS we analyse development of hydrodynamic instabilities in the melt layer.

  1. Laser Induced Periodic Surface Structures induced by surface plasmons coupled via roughness

    Energy Technology Data Exchange (ETDEWEB)

    Gurevich, E.L., E-mail: gurevich@lat.rub.de [Chair of Applied Laser Technology, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum (Germany); Gurevich, S.V., E-mail: gurevics@uni-muenster.de [Institute for Theoretical Physics, University of Münster, Wilhelm-Klemm-Straße 9, 48149 Münster (Germany)

    2014-05-01

    In this paper the formation mechanisms of the femtosecond laser-induced periodic surface structures (LIPSS) are discussed. One of the most frequently used theories explains the structures by interference between the incident laser beam and surface plasmon-polariton waves. The latter is most commonly attributed to the coupling of the incident laser light to the surface roughness. We demonstrate that this excitation of surface plasmons contradicts the results of laser-ablation experiments. As an alternative approach to the excitation of LIPSS we analyse development of hydrodynamic instabilities in the melt layer.

  2. Dynamics of vortex interactions in two-dimensional flows

    DEFF Research Database (Denmark)

    Juul Rasmussen, J.; Nielsen, A.H.; Naulin, V.

    2002-01-01

    a critical value, a(c). Using the Weiss-field, a(c) is estimated for vortex patches. Introducing an effective radius for vortices with distributed vorticity, we find that 3.3 a(c) ...The dynamics and interaction of like-signed vortex structures in two dimensional flows are investigated by means of direct numerical solutions of the two-dimensional Navier-Stokes equations. Two vortices with distributed vorticity merge when their distance relative to their radius, d/R-0l. is below...

  3. Hamiltonian formalism of two-dimensional Vlasov kinetic equation.

    Science.gov (United States)

    Pavlov, Maxim V

    2014-12-08

    In this paper, the two-dimensional Benney system describing long wave propagation of a finite depth fluid motion and the multi-dimensional Russo-Smereka kinetic equation describing a bubbly flow are considered. The Hamiltonian approach established by J. Gibbons for the one-dimensional Vlasov kinetic equation is extended to a multi-dimensional case. A local Hamiltonian structure associated with the hydrodynamic lattice of moments derived by D. J. Benney is constructed. A relationship between this hydrodynamic lattice of moments and the two-dimensional Vlasov kinetic equation is found. In the two-dimensional case, a Hamiltonian hydrodynamic lattice for the Russo-Smereka kinetic model is constructed. Simple hydrodynamic reductions are presented.

  4. Efficient design, accurate fabrication and effective characterization of plasmonic quasicrystalline arrays of nano-spherical particles

    Science.gov (United States)

    Namin, Farhad A.; Yuwen, Yu A.; Liu, Liu; Panaretos, Anastasios H.; Werner, Douglas H.; Mayer, Theresa S.

    2016-02-01

    In this paper, the scattering properties of two-dimensional quasicrystalline plasmonic lattices are investigated. We combine a newly developed synthesis technique, which allows for accurate fabrication of spherical nanoparticles, with a recently published variation of generalized multiparticle Mie theory to develop the first quantitative model for plasmonic nano-spherical arrays based on quasicrystalline morphologies. In particular, we study the scattering properties of Penrose and Ammann- Beenker gold spherical nanoparticle array lattices. We demonstrate that by using quasicrystalline lattices, one can obtain multi-band or broadband plasmonic resonances which are not possible in periodic structures. Unlike previously published works, our technique provides quantitative results which show excellent agreement with experimental measurements.

  5. Two-Dimensional Mesoscale-Ordered Conducting Polymers

    NARCIS (Netherlands)

    Liu, Shaohua; Zhang, Jian; Dong, Renhao; Gordiichuk, Pavlo; Zhang, Tao; Zhuang, Xiaodong; Mai, Yiyong; Liu, Feng; Herrmann, Andreas; Feng, Xinliang

    2016-01-01

    Despite the availability of numerous two-dimensional (2D) materials with structural ordering at the atomic or molecular level, direct construction of mesoscale-ordered superstructures within a 2D monolayer remains an enormous challenge. Here, we report the synergic manipulation of two types of assem

  6. Divorticity and dihelicity in two-dimensional hydrodynamics

    DEFF Research Database (Denmark)

    Shivamoggi, B.K.; van Heijst, G.J.F.; Juul Rasmussen, Jens

    2010-01-01

    A framework is developed based on the concepts of divorticity B (≡×ω, ω being the vorticity) and dihelicity g (≡vB) for discussing the theoretical structure underlying two-dimensional (2D) hydrodynamics. This formulation leads to the global and Lagrange invariants that could impose significant...

  7. Two-Dimensional Mesoscale-Ordered Conducting Polymers

    NARCIS (Netherlands)

    Liu, Shaohua; Zhang, Jian; Dong, Renhao; Gordiichuk, Pavlo; Zhang, Tao; Zhuang, Xiaodong; Mai, Yiyong; Liu, Feng; Herrmann, Andreas; Feng, Xinliang

    2016-01-01

    Despite the availability of numerous two-dimensional (2D) materials with structural ordering at the atomic or molecular level, direct construction of mesoscale-ordered superstructures within a 2D monolayer remains an enormous challenge. Here, we report the synergic manipulation of two types of

  8. Two Dimensional F(R) Horava-Lifshitz Gravity

    CERN Document Server

    Kluson, J

    2016-01-01

    We study two-dimensional F(R) Horava-Lifshitz gravity from the Hamiltonian point of view. We determine constraints structure with emphasis on the careful separation of the second class constraints and global first class constraints. We determine number of physical degrees of freedom and also discuss gauge fixing of the global first class constraints.

  9. Interpolation by two-dimensional cubic convolution

    Science.gov (United States)

    Shi, Jiazheng; Reichenbach, Stephen E.

    2003-08-01

    This paper presents results of image interpolation with an improved method for two-dimensional cubic convolution. Convolution with a piecewise cubic is one of the most popular methods for image reconstruction, but the traditional approach uses a separable two-dimensional convolution kernel that is based on a one-dimensional derivation. The traditional, separable method is sub-optimal for the usual case of non-separable images. The improved method in this paper implements the most general non-separable, two-dimensional, piecewise-cubic interpolator with constraints for symmetry, continuity, and smoothness. The improved method of two-dimensional cubic convolution has three parameters that can be tuned to yield maximal fidelity for specific scene ensembles characterized by autocorrelation or power-spectrum. This paper illustrates examples for several scene models (a circular disk of parametric size, a square pulse with parametric rotation, and a Markov random field with parametric spatial detail) and actual images -- presenting the optimal parameters and the resulting fidelity for each model. In these examples, improved two-dimensional cubic convolution is superior to several other popular small-kernel interpolation methods.

  10. Interior design of a two-dimensional semiclassic black hole

    CERN Document Server

    Levanony, Dana; 10.1103/PhysRevD.80.084008

    2009-01-01

    We look into the inner structure of a two-dimensional dilatonic evaporating black hole. We establish and employ the homogenous approximation for the black-hole interior. The field equations admit two types of singularities, and their local asymptotic structure is investigated. One of these singularities is found to develop, as a spacelike singularity, inside the black hole. We then study the internal structure of the evaporating black hole from the horizon to the singularity.

  11. rac- 11-t-Butoxy- 1,4-dihydro- 1,4-methanoanthracene:A two-dimensional framework structure built from C-H…O and C-H…π hydrogen bonds

    Institute of Scientific and Technical Information of China (English)

    Hsing Yang Tsai; Ming Hui Luo; Ming Jen Chang; Tzu Chien Fang; Kew Yu Chen

    2012-01-01

    The title compound rac-11-t-butoxy-1,4-dihydro-1,4-methanoanthracene (C19H2oO,Mr =264.35) has been synthesized and characterized by FT-IR,1H NMR,HRMS spectra and single-crystal X-ray diffraction.The crystal belongs to monoclinic,space group P21/n,with a =13.5240(10),b =8.3453(6),c =13.9604(9) (A),β =100.0190(10)°.The structure of the title compound comprises a norbornene unit with a t-butoxy group,having a naphthalene ring fused on one side.The naphthalene is essentially planar with a maximum deviation of 0.032(2) (A) for atom C(3).In the crystal,inversion-related molecules are linked by pairs of C-H...O hydrogen bonds,forming a cyclic dimer with R22 (16) graph-set motif.The C-H...π interactions are also observed,linking the molecules into a continuous two-dimensional framework structure.

  12. A new two-dimensional Cd(II) coordination polymer based on 2-(1H-imidazol-1-ylmethyl)-6-methyl-1H-benzimidazole and benzene-1,2-dicarboxylate: synthesis, crystal structure and characterization.

    Science.gov (United States)

    Yang, Huai Xia; Yang, Yan Qiu; Cheng, Di; Li, Ya Xue; Meng, Xiang Ru

    2017-10-01

    In the construction of coordination polymers, many factors can influence the formation of the final architectures, such as the nature of the metal centres, the organic ligands and the counter-anions. In the coordination polymer poly[aqua(μ-benzene-1,2-dicarboxylato-κ(4)O(1),O(1'):O(2),O(2'))[μ-2-(1H-imidazol-1-ylmethyl)-6-methyl-1H-benzimidazole-κ(2)N(2):N(3)]cadmium(II)], [Cd(C12H12N4)(C8H4O4)(H2O)]n or [Cd(immb)(1,2-bdic)(H2O)]n, each Cd(II) ion is seven-coordinated by two N atoms from two symmetry-related 2-(1H-imidazol-1-ylmethyl)-6-methyl-1H-benzimidazole (immb) ligands, by four O atoms from two symmetry-related benzene-1,2-dicarboxylate (1,2-bdic(2-)) ligands and by one water molecule, leading to a CdN2O5 distorted pentagonal bipyramidal coordination environment. The immb and 1,2-bdic(2-) ligands bridge Cd(II) ions and form a two-dimensional network structure. O-H...O and N-H...O hydrogen bonds stabilize the structure. In addition, the IR spectroscopic properties, PXRD patterns, thermogravimetric behaviour and fluorescence properties of the title polymer have been investigated.

  13. Two-dimensional numerical computation of the structure-dependent spectral response in a 4H-SiC metal-semiconductor-metal ultraviolet photodetector with consideration of reflection and absorption on contact electrodes

    Institute of Scientific and Technical Information of China (English)

    Chen Bin; Yang Yintang; Chai Changchun; Song Kun; Ma Zhenyang

    2011-01-01

    A two-dimensional model of a 4H-SiC metal-semiconductor-metal (MSM) ultraviolet photodetector has been established using a self-consistent numerical calculation method.The structure-dependent spectral response of a 4H-SiC MSM detector is calculated by solving Poisson's equation,the current continuity equation and the current density equation.The calculated results are verified with experimental data.With consideration of the reflection and absorption on the metal contacts,a detailed study involving various electrode heights (H),spacings (S) and widths (W) reveals conclusive results in device design.The mechanisms responsible for variations of responsivity with those parameters are analyzed.The findings show that responsivity is inversely proportional to electrode height and is enhanced with an increase of electrode spacing and width.In addition,the ultraviolet (UV)-to-visible rejection ratio is > 103.By optimizing the device structure at 10 V bias,a responsivity as high as 180.056 mA/W,a comparable quantum efficiency of 77.93% and a maximum UV-to-visible rejection ratio of 1875 are achieved with a detector size of H =50 nm,S =9 μm and W =3μm.

  14. Two-dimensional numerical computation of the structure-dependent spectral response in a 4H-SiC metal-semiconductor-metal ultraviolet photodetector with consideration of reflection and absorption on contact electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Chen Bin; Yang Yintang; Chai Changchun; Song Kun; Ma Zhenyang, E-mail: xidianchenbin@163.com [Key Laboratory of Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2011-08-15

    A two-dimensional model of a 4H-SiC metal-semiconductor-metal (MSM) ultraviolet photodetector has been established using a self-consistent numerical calculation method. The structure-dependent spectral response of a 4H-SiC MSM detector is calculated by solving Poisson's equation, the current continuity equation and the current density equation. The calculated results are verified with experimental data. With consideration of the reflection and absorption on the metal contacts, a detailed study involving various electrode heights (H), spacings (S) and widths (W) reveals conclusive results in device design. The mechanisms responsible for variations of responsivity with those parameters are analyzed. The findings show that responsivity is inversely proportional to electrode height and is enhanced with an increase of electrode spacing and width. In addition, the ultraviolet (UV)-to-visible rejection ratio is > 10{sup 3}. By optimizing the device structure at 10 V bias, a responsivity as high as 180.056 mA/W, a comparable quantum efficiency of 77.93% and a maximum UV-to-visible rejection ratio of 1875 are achieved with a detector size of H = 50 nm, S = 9 {mu}m and W = 3 {mu}m.

  15. TWO-DIMENSIONAL TOPOLOGY OF COSMOLOGICAL REIONIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yougang; Xu, Yidong; Chen, Xuelei [Key Laboratory of Computational Astrophysics, National Astronomical Observatories, Chinese Academy of Sciences, Beijing, 100012 China (China); Park, Changbom [School of Physics, Korea Institute for Advanced Study, 85 Hoegiro, Dongdaemun-gu, Seoul 130-722 (Korea, Republic of); Kim, Juhan, E-mail: wangyg@bao.ac.cn, E-mail: cbp@kias.re.kr [Center for Advanced Computation, Korea Institute for Advanced Study, 85 Hoegiro, Dongdaemun-gu, Seoul 130-722 (Korea, Republic of)

    2015-11-20

    We study the two-dimensional topology of the 21-cm differential brightness temperature for two hydrodynamic radiative transfer simulations and two semi-numerical models. In each model, we calculate the two-dimensional genus curve for the early, middle, and late epochs of reionization. It is found that the genus curve depends strongly on the ionized fraction of hydrogen in each model. The genus curves are significantly different for different reionization scenarios even when the ionized faction is the same. We find that the two-dimensional topology analysis method is a useful tool to constrain the reionization models. Our method can be applied to the future observations such as those of the Square Kilometre Array.

  16. Two dimensional topology of cosmological reionization

    CERN Document Server

    Wang, Yougang; Xu, Yidong; Chen, Xuelei; Kim, Juhan

    2015-01-01

    We study the two-dimensional topology of the 21-cm differential brightness temperature for two hydrodynamic radiative transfer simulations and two semi-numerical models. In each model, we calculate the two dimensional genus curve for the early, middle and late epochs of reionization. It is found that the genus curve depends strongly on the ionized fraction of hydrogen in each model. The genus curves are significantly different for different reionization scenarios even when the ionized faction is the same. We find that the two-dimensional topology analysis method is a useful tool to constrain the reionization models. Our method can be applied to the future observations such as those of the Square Kilometer Array.

  17. Two-dimensional x-ray diffraction

    CERN Document Server

    He, Bob B

    2009-01-01

    Written by one of the pioneers of 2D X-Ray Diffraction, this useful guide covers the fundamentals, experimental methods and applications of two-dimensional x-ray diffraction, including geometry convention, x-ray source and optics, two-dimensional detectors, diffraction data interpretation, and configurations for various applications, such as phase identification, texture, stress, microstructure analysis, crystallinity, thin film analysis and combinatorial screening. Experimental examples in materials research, pharmaceuticals, and forensics are also given. This presents a key resource to resea

  18. Matching Two-dimensional Gel Electrophoresis' Spots

    DEFF Research Database (Denmark)

    Dos Anjos, António; AL-Tam, Faroq; Shahbazkia, Hamid Reza

    2012-01-01

    This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches. This ar......This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches...

  19. Mobility anisotropy of two-dimensional semiconductors

    Science.gov (United States)

    Lang, Haifeng; Zhang, Shuqing; Liu, Zhirong

    2016-12-01

    The carrier mobility of anisotropic two-dimensional semiconductors under longitudinal acoustic phonon scattering was theoretically studied using deformation potential theory. Based on the Boltzmann equation with the relaxation time approximation, an analytic formula of intrinsic anisotropic mobility was derived, showing that the influence of effective mass on mobility anisotropy is larger than those of deformation potential constant or elastic modulus. Parameters were collected for various anisotropic two-dimensional materials (black phosphorus, Hittorf's phosphorus, BC2N , MXene, TiS3, and GeCH3) to calculate their mobility anisotropy. It was revealed that the anisotropic ratio is overestimated by the previously described method.

  20. Towards two-dimensional search engines

    OpenAIRE

    Ermann, Leonardo; Chepelianskii, Alexei D.; Shepelyansky, Dima L.

    2011-01-01

    We study the statistical properties of various directed networks using ranking of their nodes based on the dominant vectors of the Google matrix known as PageRank and CheiRank. On average PageRank orders nodes proportionally to a number of ingoing links, while CheiRank orders nodes proportionally to a number of outgoing links. In this way the ranking of nodes becomes two-dimensional that paves the way for development of two-dimensional search engines of new type. Statistical properties of inf...