WorldWideScience

Sample records for two-dimensional optical switching

  1. Symmetric two dimensional photonic crystal coupled waveguide with point defect for optical switch application

    CERN Document Server

    Hardhienata, Hendradi

    2012-01-01

    Two dimensional (2D) photonic crystals are well known for its ability to manipulate the propagation of electromagnetic wave inside the crystal. 1D and 2D photonic crystals are relatively easier to fabricate than 3D because the former work in the microwave and far infrared regions whereas the later work in the visible region and requires smaller lattice constants. In this paper, simulation for a modified 2D PC with two symmetric waveguide channels where a defect is located inside one of the channel is performed. The simulation results show that optical switching is possible by modifying the refractive index of the defect. If more than one structure is applied this feature can potentially be applied to produce a cascade optical switch.

  2. Two-dimensional optical spectroscopy

    CERN Document Server

    Cho, Minhaeng

    2009-01-01

    Discusses the principles and applications of two-dimensional vibrational and optical spectroscopy techniques. This book provides an account of basic theory required for an understanding of two-dimensional vibrational and electronic spectroscopy.

  3. Switching dynamics of a two-dimensional nonlinear couplers in a photopolymer – A variational approach

    Indian Academy of Sciences (India)

    T Uthayakumar; K Porsezian

    2010-11-01

    We study the optical switching of the two-dimensional nonlinear coupler in a doped photopolymer. The coupled nonlinear Schrödinger equations (CNLSEs) describing our coupler system are analysed using Lagrangian variational method. From the Lagrangian, a set of coupled ordinary differential equations (ODEs) describing the system dynamics is obtained. This set of ODE’s is further reduced to single coupled equation and an analytical solution is obtained using the cnoidal functions and the system dynamics is studied. The key factor for switching mechanism of our coupler system is the metal-induced surface plasmon resonance (SPR). This SPR-induced local nonlinear effects results in self-focussing of the optical beam through the launched core. A description of a particle in a well is also made to study the photon switching through the coupler system.

  4. Optical modulators with two-dimensional layered materials

    CERN Document Server

    Sun, Zhipei; Wang, Feng

    2016-01-01

    Light modulation is an essential operation in photonics and optoelectronics. With existing and emerging technologies increasingly demanding compact, efficient, fast and broadband optical modulators, high-performance light modulation solutions are becoming indispensable. The recent realization that two-dimensional layered materials could modulate light with superior performance has prompted intense research and significant advances, paving the way for realistic applications. In this review, we cover the state-of-the-art of optical modulators based on two-dimensional layered materials including graphene, transition metal dichalcogenides and black phosphorus. We discuss recent advances employing hybrid structures, such as two-dimensional heterostructures, plasmonic structures, and silicon/fibre integrated structures. We also take a look at future perspectives and discuss the potential of yet relatively unexplored mechanisms such as magneto-optic and acousto-optic modulation.

  5. Easy interpretation of optical two-dimensional correlation spectra

    NARCIS (Netherlands)

    Lazonder, K.; Pshenichnikov, M.S.; Wiersma, D.A.

    2006-01-01

    We demonstrate that the value of the underlying frequency-frequency correlation function can be retrieved from a two-dimensional optical correlation spectrum through a simple relationship. The proposed method yields both intuitive clues and a quantitative measure of the dynamics of the system. The t

  6. A two-dimensional spin field-effect switch

    Science.gov (United States)

    Yan, Wenjing; Txoperena, Oihana; Llopis, Roger; Dery, Hanan; Hueso, Luis E.; Casanova, Fèlix

    2016-11-01

    Future development in spintronic devices will require an advanced control of spin currents, for example by an electric field. Here we demonstrate an approach that differs from previous proposals such as the Datta and Das modulator, and that is based on a van de Waals heterostructure of atomically thin graphene and semiconducting MoS2. Our device combines the superior spin transport properties of graphene with the strong spin-orbit coupling of MoS2 and allows switching of the spin current in the graphene channel between ON and OFF states by tuning the spin absorption into the MoS2 with a gate electrode. Our proposal holds potential for technologically relevant applications such as search engines or pattern recognition circuits, and opens possibilities towards electrical injection of spins into transition metal dichalcogenides and alike materials.

  7. Topological Quantum Optics in Two-Dimensional Atomic Arrays

    Science.gov (United States)

    Perczel, J.; Borregaard, J.; Chang, D. E.; Pichler, H.; Yelin, S. F.; Zoller, P.; Lukin, M. D.

    2017-07-01

    We demonstrate that two-dimensional atomic emitter arrays with subwavelength spacing constitute topologically protected quantum optical systems where the photon propagation is robust against large imperfections while losses associated with free space emission are strongly suppressed. Breaking time-reversal symmetry with a magnetic field results in gapped photonic bands with nontrivial Chern numbers and topologically protected, long-lived edge states. Due to the inherent nonlinearity of constituent emitters, such systems provide a platform for exploring quantum optical analogs of interacting topological systems.

  8. Optical limiter based on two-dimensional nonlinear photonic crystals

    Science.gov (United States)

    Belabbas, Amirouche; Lazoul, Mohamed

    2016-04-01

    The aim behind this work is to investigate the capabilities of nonlinear photonic crystals to achieve ultra-fast optical limiters based on third order nonlinear effects. The purpose is to combine the actions of nonlinear effects with the properties of photonic crystals in order to activate the photonic band according to the magnitude of the nonlinear effects, themselves a function of incident laser power. We are interested in designing an optical limiter based nonlinear photonic crystal operating around 1064 nm and its second harmonic at 532 nm. Indeed, a very powerful solid-state laser that can blind or destroy optical sensors and is widely available and easy to handle. In this work, we perform design and optimization by numerical simulations to determine the better structure for the nonlinear photonic crystal to achieve compact and efficient integrated optical limiter. The approach consists to analyze the band structures in Kerr-nonlinear two-dimensional photonic crystals as a function of the optical intensity. We confirm that these bands are dynamically red-shifted with regard to the bands observed in linear photonic crystals or in the case of weak nonlinear effects. The implemented approach will help to understand such phenomena as intensitydriven optical limiting with Kerr-nonlinear photonic crystals.

  9. Isolated structures in two-dimensional optical superlattice

    Science.gov (United States)

    Zou, Xin-Hao; Yang, Bao-Guo; Xu, Xia; Tang, Peng-Ju; Zhou, Xiao-Ji

    2017-10-01

    Overlaying commensurate optical lattices with various configurations called superlattices can lead to exotic lattice topologies and, in turn, a discovery of novel physics. In this study, by overlapping the maxima of lattices, a new isolated structure is created, while the interference of minima can generate various "sublattice" patterns. Three different kinds of primitive lattices are used to demonstrate isolated square, triangular, and hexagonal "sublattice" structures in a two-dimensional optical superlattice, the patterns of which can be manipulated dynamically by tuning the polarization, frequency, and intensity of laser beams. In addition, we propose the method of altering the relative phase to adjust the tunneling amplitudes in "sublattices". Our configurations provide unique opportunities to study particle entanglement in "lattices" formed by intersecting wells and to implement special quantum logic gates in exotic lattice geometries.

  10. Optical Spectroscopy of Two Dimensional Graphene and Boron Nitride

    Science.gov (United States)

    Ju, Long

    This dissertation describes the use of optical spectroscopy in studying the physical properties of two dimensional nano materials like graphene and hexagonal boron nitride. Compared to bulk materials, atomically thin two dimensional materials have a unique character that is the strong dependence of physical properties on external control. Both electronic band structure and chemical potential can be tuned in situ by electric field-which is a powerful knob in experiment. Therefore the optical study at atomic thickness scale can greatly benefit from modern micro-fabrication technique and electric control of the material properties. As will be shown in this dissertation, such control of both gemometric and physical properties enables new possibilities of optical spectroscopic measurement as well as opto-electronic studies. Other experimental techniques like electric transport and scanning tunneling microscopy and spectroscopy are also combined with optical spectroscopy to reveal the physics that is beyond the reach of each individual technique. There are three major themes in the dissertation. The first one is focused on the study of plasmon excitation of Dirac electrons in monolayer graphene. Unlike plasmons in ordinary two dimensional electron gas, plasmons of 2D electrons as in graphene obey unusual scaling laws. We fabricate graphene micro-ribbon arrays with photolithography technique and use optical absorption spectroscopy to study its absorption spectrum. The experimental result demonstrates the extraordinarily strong light-plasmon coupling and its novel dependence on both charge doping and geometric dimensions. This work provides a first glance at the fundamental properties of graphene plasmons and forms the basis of an emerging subfield of graphene research and applications such as graphene terahertz metamaterials. The second part describes the opto-electronic response of heterostructures composed of graphene and hexagonal boron nitride. We found that there is

  11. Isolated Structures in Two-Dimensional Optical Superlattice

    CERN Document Server

    Zou, Xinhao; Xu, Xia; Tang, Pengju; Zhou, Xiaoji

    2016-01-01

    Overlaying commensurate optical lattices with various configurations called superlattices can lead to exotic lattice topologies and, in turn, a discovery of novel physics. In this study, by overlapping the maxima of lattices, a new isolated structure is created, while the interference of minima can generate various "sublattice" patterns. Three different kinds of primitive lattices are used to demonstrate isolated square, triangular, and hexagonal "sublattice" structures in a two-dimensional optical superlattice, the patterns of which can be manipulated dynamically by tuning the polarization, frequency, and intensity of laser beams. In addition, we propose the method of altering the relative phase to adjust the tunneling amplitudes in "sublattices." Our configurations provide unique opportunities to study particle entanglement in "lattices" formed by intersecting wells and to implement special quantum logic gates in exotic lattice geometries.

  12. Two Dimensional Organometal Halide Perovskite Nanorods with Tunable Optical Properties.

    Science.gov (United States)

    Aharon, Sigalit; Etgar, Lioz

    2016-05-11

    Organo-metal halide perovskite is an efficient light harvester in photovoltaic solar cells. Organometal halide perovskite is used mainly in its "bulk" form in the solar cell. Confined perovskite nanostructures could be a promising candidate for efficient optoelectronic devices, taking advantage of the superior bulk properties of organo-metal halide perovskite, as well as the nanoscale properties. In this paper, we present facile low-temperature synthesis of two-dimensional (2D) lead halide perovskite nanorods (NRs). These NRs show a shift to higher energies in the absorbance and in the photoluminescence compared to the bulk material, which supports their 2D structure. X-ray diffraction (XRD) analysis of the NRs demonstrates their 2D nature combined with the tetragonal 3D perovskite structure. In addition, by alternating the halide composition, we were able to tune the optical properties of the NRs. Fast Fourier transform, and electron diffraction show the tetragonal structure of these NRs. By varying the ligands ratio (e.g., octylammonium to oleic acid) in the synthesis, we were able to provide the formation mechanism of these novel 2D perovskite NRs. The 2D perovskite NRs are promising candidates for a variety of optoelectronic applications, such as light-emitting diodes, lasing, solar cells, and sensors.

  13. Electroforming free resistive switching memory in two-dimensional VOx nanosheets

    KAUST Repository

    Hota, Mrinal Kanti

    2015-10-21

    We report two-dimensional VOx nanosheets containing multi-oxidation states (V5+, V4+, and V3+), prepared by a hydrothermal process for potential applications in resistive switching devices. The experimental results demonstrate a highly reproducible, electroforming-free, low SET bias bipolar resistive switching memory performance with endurance for more than 100 cycles maintaining OFF/ON ratio of ∼60 times. These devices show better memory performance as compared to previously reported VOx thin film based devices. The memory mechanism in VOx is proposed to be originated from the migration of oxygen vacancies/ions, an influence of the bottom electrode and existence of multi-oxidation states.

  14. Correlated rotational switching in two-dimensional self-assembled molecular rotor arrays

    Science.gov (United States)

    Wasio, Natalie A.; Slough, Diana P.; Smith, Zachary C.; Ivimey, Christopher J.; Thomas, Samuel W., III; Lin, Yu-Shan; Sykes, E. Charles H.

    2017-07-01

    Molecular devices are capable of performing a number of functions from mechanical motion to simple computation. Their utility is somewhat limited, however, by difficulties associated with coupling them with either each other or with interfaces such as electrodes. Self-assembly of coupled molecular devices provides an option for the construction of larger entities that can more easily integrate with existing technologies. Here we demonstrate that ordered organometallic arrays can be formed spontaneously by reaction of precursor molecular rotor molecules with a metal surface. Scanning tunnelling microscopy enables individual rotors in the arrays to be switched and the resultant switches in neighbouring rotors imaged. The structure and dimensions of the ordered molecular rotor arrays dictate the correlated switching properties of the internal submolecular rotor units. Our results indicate that self-assembly of two-dimensional rotor crystals produces systems with correlated dynamics that would not have been predicted a priori.

  15. Latching micro optical switch

    Science.gov (United States)

    Garcia, Ernest J; Polosky, Marc A

    2013-05-21

    An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.

  16. Curvature effects in two-dimensional optical devices inspired by transformation optics

    KAUST Repository

    Yuan, Shuhao

    2016-11-14

    Light transport in curved quasi two-dimensional waveguides is considered theoretically. Within transformation optics and tensor theory, a concise description of curvature effects on transverse electric and magnetic waves is derived. We show that the curvature can induce light focusing and photonic crystal properties, which are confirmed by finite element simulations. Our results indicate that the curvature is an effective parameter for designing quasi two-dimensional optical devices in the fields of micro and nano photonics. © 2016 Author(s).

  17. Stable two-dimensional conductance switch of polyaniline molecule connecting to graphene nanoribbons.

    Science.gov (United States)

    Fan, Zhi-Qiang; Chen, Ke-Qiu

    2014-08-07

    Incorporating the characteristics of the single-layer graphene nanoribbon and the polyaniline molecule, we theoretically design a two-dimensional molecular device and investigate its transport properties by applying nonequilibrium Green's functions in combination with density-functional theory. The calculated results reveal that the arrangements of frontier molecular orbitals and the energy gap between the HOMO and the LUMO of an isolated polyaniline molecule are different between its two isolable states: full reduced leucoemeraldine base and full oxidized pernigraniline base. When a polyaniline molecule connects to two graphene nanoribbons as a two-dimensional molecular device, the conductance of its full oxidized pernigraniline base is much higher than the conductance of its full reduced leucoemeraldine base. The switch ratios of two bases' currents almost maintain a constant value before 0.8 V. In other word, the conductance switch behavior in our device is stable in a big bias region which makes it have a broader application in future logic and memory devices.

  18. Two-dimensional dispersive shock waves in dissipative optical media

    CERN Document Server

    Kartashov, Yaroslav V

    2013-01-01

    We study generation of two-dimensional dispersive shock waves and oblique dark solitons upon interaction of tilted plane waves with negative refractive index defects embedded into defocusing material with linear gain and two-photon absorption. Different evolution regimes are encountered including the formation of well-localized disturbances for input tilts below critical one, and generation of extended shock waves containing multiple intensity oscillations in the "upstream" region and gradually vanishing oblique dark solitons in "downstream" region for input tilts exceeding critical one. The generation of stable dispersive shock waves is possible only below certain critical defect strength.

  19. Field analysis of two-dimensional integrated optical gratings

    Science.gov (United States)

    Borsboom, P.-P.; Frankena, H. J.

    1995-05-01

    A rigorous technique to determine the field scattered by a two-dimensional rectangular grating made up of many corrugations was developed. In this method, the grating was deemed as a sequence of two types of waveguide sections, alternatingly connected by step discontinuities. A matrix was derived that described the entire rectangular grating by integrating the separate steps and waveguide sections. With the proposed technique, several configuration were analyzed. The obtained results showed good consistency with the consequences of previous studies. Furthermore, to examine the numerical stability of the proposed method, the length of the grating was increased and obtained results for a grating with 100 periods.

  20. Nonlinear optical response of a two-dimensional atomic crystal.

    Science.gov (United States)

    Merano, Michele

    2016-01-01

    The theory of Bloembergen and Pershan for the light waves at the boundary of nonlinear media is extended to a nonlinear two-dimensional (2D) atomic crystal, i.e., a single planar atomic lattice, placed between linear bulk media. The crystal is treated as a zero-thickness interface, a real 2D system. Harmonic waves emanate from it. Generalization of the laws of reflection and refraction give the direction and the intensity of the harmonic waves. As a particular case that contains all the essential physical features, second-order harmonic generation is considered. The theory, due to its simplicity that stems from the special character of a single planar atomic lattice, is able to elucidate and explain the rich experimental details of harmonic generation from a 2D atomic crystal.

  1. Two-dimensional optical thermal ratchets based on Fibonacci spirals.

    Science.gov (United States)

    Xiao, Ke; Roichman, Yael; Grier, David G

    2011-07-01

    An ensemble of symmetric potential energy wells arranged at the vertices of a Fibonacci spiral can serve as the basis for an irreducibly two-dimensional thermal ratchet. Periodic rotation of the potential energy landscape through a three-step cycle drives trapped Brownian particles along spiral trajectories through the pattern. Which spiral is selected depends on the angular displacement at each step, with transitions between selected spirals arising at rational proportions of the golden angle. Fibonacci spiral ratchets therefore display an exceptionally rich range of transport properties, including inhomogeneous states in which different parts of the pattern induce motion in different directions. Both the radial and angular components of these trajectories can undergo flux reversal as a function of the scale of the pattern or the rate of rotation.

  2. Two-Dimensional Simulation of Mass Transfer in Unitized Regenerative Fuel Cells under Operation Mode Switching

    Directory of Open Access Journals (Sweden)

    Lulu Wang

    2016-01-01

    Full Text Available A two-dimensional, single-phase, isothermal, multicomponent, transient model is built to investigate the transport phenomena in unitized regenerative fuel cells (URFCs under the condition of switching from the fuel cell (FC mode to the water electrolysis (WE mode. The model is coupled with an electrochemical reaction. The proton exchange membrane (PEM is selected as the solid electrolyte of the URFC. The work is motivated by the need to elucidate the complex mass transfer and electrochemical process under operation mode switching in order to improve the performance of PEM URFC. A set of governing equations, including conservation of mass, momentum, species, and charge, are considered. These equations are solved by the finite element method. The simulation results indicate the distributions of hydrogen, oxygen, water mass fraction, and electrolyte potential response to the transient phenomena via saltation under operation mode switching. The hydrogen mass fraction gradients are smaller than the oxygen mass fraction gradients. The average mass fractions of the reactants (oxygen and hydrogen and product (water exhibit evident differences between each layer in the steady state of the FC mode. By contrast, the average mass fractions of the reactant (water and products (oxygen and hydrogen exhibit only slight differences between each layer in the steady state of the WE mode. Under either the FC mode or the WE mode, the duration of the transient state is only approximately 0.2 s.

  3. Fabrication of two-dimensional micro patterns for adaptive optics by using laser interference lithography

    Science.gov (United States)

    Li, Xinghui; Cai, Yindi; Aihara, Ryo; Shimizu, Yuki; Ito, So; Gao, Wei

    2015-07-01

    This paper presents a fabrication method of two-dimensional micro patterns for adaptive optics with a micrometric or sub-micrometric period to be used for fabrication of micro lens array or two-dimensional diffraction gratings. A multibeam two-axis Lloyd's mirror interferometer is employed to carry out laser interference lithography for the fabrication of two-dimensional grating structures. In the proposed instrument, the optical setup consists of a light source providing a laser beam, a multi-beam generator, two plane mirrors to generate a two-dimensional XY interference pattern and a substrate on which the XY interference pattern is to be exposed. In this paper, pattern exposure tests are carried out by the developed optical configuration optimized by computer simulations. Some experimental results of the XY pattern fabrication will be reported.

  4. Optical packet switched networks

    DEFF Research Database (Denmark)

    Hansen, Peter Bukhave

    1999-01-01

    Optical packet switched networks are investigated with emphasis on the performance of the packet switch blocks. Initially, the network context of the optical packet switched network is described showing that a packet network will provide transparency, flexibility and bridge the granularity gap...... between the electrical switched layer and the WDM transport layer. Analytical models are implemented to determine the signal quality ghrough the switch blocks in terms of power penalty and to assess the traffic performance of different switch block architectures. Further, a computer simulation model...... is used to investigate the influence on the traffic performance of asynchronous operation of the switch blocks. The signal quality investigation illustrates some of the component requirements in respect to gain saturation in SOA gates and crosstalk in order to obtain high cascadability of the switch...

  5. Two dimensional thermo-optic beam steering using a silicon photonic optical phased array

    Science.gov (United States)

    Mahon, Rita; Preussner, Marcel W.; Rabinovich, William S.; Goetz, Peter G.; Kozak, Dmitry A.; Ferraro, Mike S.; Murphy, James L.

    2016-03-01

    Components for free space optical communication terminals such as lasers, amplifiers, and receivers have all seen substantial reduction in both size and power consumption over the past several decades. However, pointing systems, such as fast steering mirrors and gimbals, have remained large, slow and power-hungry. Optical phased arrays provide a possible solution for non-mechanical beam steering devices that can be compact and lower in power. Silicon photonics is a promising technology for phased arrays because it has the potential to scale to many elements and may be compatible with CMOS technology thereby enabling batch fabrication. For most free space optical communication applications, two-dimensional beam steering is needed. To date, silicon photonic phased arrays have achieved two-dimensional steering by combining thermo-optic steering, in-plane, with wavelength tuning by means of an output grating to give angular tuning, out-of-plane. While this architecture might work for certain static communication links, it would be difficult to implement for moving platforms. Other approaches have required N2 controls for an NxN element phased array, which leads to complexity. Hence, in this work we demonstrate steering using the thermo-optic effect for both dimensions with a simplified steering mechanism requiring only two control signals, one for each steering dimension.

  6. Border collision bifurcations in a two-dimensional piecewise smooth map from a simple switching circuit.

    Science.gov (United States)

    Gardini, Laura; Fournier-Prunaret, Danièle; Chargé, Pascal

    2011-06-01

    In recent years, the study of chaotic and complex phenomena in electronic circuits has been widely developed due to the increasing number of applications. In these studies, associated with the use of chaotic sequences, chaos is required to be robust (not occurring only in a set of zero measure and persistent to perturbations of the system). These properties are not easy to be proved, and numerical simulations are often used. In this work, we consider a simple electronic switching circuit, proposed as chaos generator. The object of our study is to determine the ranges of the parameters at which the dynamics are chaotic, rigorously proving that chaos is robust. This is obtained showing that the model can be studied via a two-dimensional piecewise smooth map in triangular form and associated with a one-dimensional piecewise linear map. The bifurcations in the parameter space are determined analytically. These are the border collision bifurcation curves, the degenerate flip bifurcations, which only are allowed to occur to destabilize the stable cycles, and the homoclinic bifurcations occurring in cyclical chaotic regions leading to chaos in 1-piece.

  7. Optical packet switching

    Science.gov (United States)

    Shekel, Eyal; Ruschin, Shlomo; Majer, Daniel; Levy, Jeff; Matmon, Guy; Koenigsberg, Lisa; Vecht, Jacob; Geron, Amir; Harlavan, Rotem; Shfaram, Harel; Arbel, Arnon; McDermott, Tom; Brewer, Tony

    2005-02-01

    We report here a scalable, multichassis, 6.3 terabit core router, which utilizes our proprietary optical switch. The router is commercially available and deployed in several customer sites. Our solution combines optical switching with electronic routing. An internal optical packet switching network interconnects the router"s electronic line cards, where routing and buffering functions take place electronically. The system architecture and performance will be described. The optical switch is based on Optical Phased Array (OPA) technology. It is a 64 x 64, fully non-blocking, optical crossbar switch, capable of switching in a fraction of a nanosecond. The basic principles of operation will be explained. Loss and crosstalk results will be presented, as well as the results of BER measurements of a 160 Gbps transmission through one channel. Basic principles of operation and measured results will be presented for the burst-mode-receivers, arbitration algorithm and synchronization. Finally, we will present some of our current research work on a next-generation optical switch. The technological issues we have solved in our internal optical packet network can have broad applicability to any global optical packet network.

  8. Passively Q-switched waveguide lasers based on two-dimensional transition metal diselenide.

    Science.gov (United States)

    Cheng, Chen; Liu, Hongliang; Tan, Yang; Vázquez de Aldana, Javier R; Chen, Feng

    2016-05-16

    We reported on the passively Q-switched waveguide lasers based on few-layer transition metal diselenide, including molybdenum diselenide (MoSe2) and tungsten diselenide (WSe2), as saturable absorbers. The MoSe2 and WSe2 membranes were covered on silica wafers by chemical vapor deposition (CVD). A low-loss depressed cladding waveguide was produced by femtosecond laser writing in a Nd:YAG crystal. Under optical pump at 808 nm, the passive Q-switching of the Nd:YAG waveguide lasing at 1064 nm was achieved, reaching maximum average output power of 115 mW (MoSe2) and 45 mW (WSe2), respectively, which are corresponding to single-pulse energy of 36 nJ and 19 nJ. The repetition rate of the Q-switched waveguide lasers was tunable from 0.995 to 3.334 MHz (MoSe2) and 0.781 to 2.938 MHz (WSe2), and the obtained minimum pulse duration was 80ns (MoSe2) and 52 ns (WSe2), respectively.

  9. Imaging hemodynamic changes in preterm infant brains with two-dimensional diffuse optical tomography

    Science.gov (United States)

    Gao, Feng; Ma, Yiwen; Yang, Fang; Zhao, Huijuan; Jiang, Jingying; Kusaka, Takashi; Ueno, Masanori; Yamada, Yukio

    2008-02-01

    We present our preliminary results on two-dimensional (2-D) optical tomographic imaging of hemodynamic changes of two preterm infant brains in different ventilation settings conditions. The investigations use the established two-wavelength, 16-channel time-correlated single photon counting system for the detection, and the generalized pulse spectrum technique based algorithm for the image reconstruction. The experiments demonstrate that two-dimensional diffuse optical tomography may be a potent and relatively simple way of investigating the functions and neural development of infant brains in the perinatal period.

  10. Optical switching device

    NARCIS (Netherlands)

    Broeder, F.J.A. den; Hanzen, R.M.N.; Duine, P.A.; Jungblut, R.M.; Draijer, C.; Roozeboom, F.; Sluis, P. van der

    2000-01-01

    A description is given of an optical switching device (1) comprising a transparent substrate (3), a switching film (5) of a hydride compound of a trivalent transition or rare earth metal having a thickness of 300 nm, and a palladium capping layer (7) having a thickness of 30 nm. The capping layer is

  11. Two-dimensional imaging of optical emission in a multicusp-ECR microwave resonant cavity

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, C.B.; Brake, M.L. [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of Nuclear Engineering

    1996-02-01

    Optical emission of the electron-cyclotron resonant (ECR) region of a multicusp microwave resonant cavity plasma source has been imaged onto a two-dimensional charge-coupled device (CCD) camera. The technique provides a real-time diagnostic of the plasma emission around the ECR region within a wavelength region defined by low-bandpass filters.

  12. High-flux two-dimensional magneto-optical-trap source for cold lithium atoms

    NARCIS (Netherlands)

    Tiecke, T.G.; Gensemer, S.D.; Ludewig, A.; Walraven, J.T.M.

    2009-01-01

    We demonstrate a two-dimensional magneto-optical trap (2D MOT) as a beam source for cold Li-6 atoms. The source is side loaded from an oven operated at temperatures in the range 600 less than or similar to T less than or similar to 700 K. The performance is analyzed by loading the atoms into a

  13. Optical fiber crossbar switch

    Science.gov (United States)

    Kilcoyne, Michael K.; Beccue, Stephen M.; Brar, Berinder; Robinson, G.; Pedrotti, Kenneth D.; Haber, William A.

    1990-07-01

    Advances in high performance computers and signal processing systems have led to parallel system architectures. The main limitation in achieving the performance expected of these parallel systems has been the realization of an efficient means to interconnect many processors into a effective parallel system. Electronic interconnections have proved cumbersome, costly and ineffective. The Optical Fiber Crossbar Switch (OFCS) is a compact low power, multi-gigahertz bandwidth multi-channel switch which can be used in large scale computer and telecommunication applications. The switch operates in the optical domain using GaAs semiconductor lasers to transmit wideband multiple channel optical data over fiber optic cables. Recently, a 32 X 32 crossbar switching system was completed and demonstrated. Error free performance was obtained at a data bandwidth of 410 MBPS, using a silicon switch IC. The switch can be completely reconfigured in less than 50 nanoseconds under computer control. The fully populated OFCS has the capability to handle 12.8 gigabits per second (GBPS) of data while switching this data over 32 channels without the loss of a single bit during switching. GaAs IC technology has now progressed to the point that 16 X 16 GaAs based crossbar switch Ics are available which have increased the data bandwidth capability to 2.4 GBPS. The present optical interfaces are integrated GaAs transmitter drivers, GaAs lasers, and integrated GaAs optical receivers with data bandwidths exceeding 2.4 GBPS. A system using all Ill-V switching and optoelectronic components is presently under development for both NASA and DoD programs. The overall system is designed to operate at 1.3 GBPS. It is expected that these systems will find wide application in high capacity computing systems based on parallel microprocessor architecture which require high data bandwidth communication between processors. The OFCS will also have application in commercial optical telecommunication systems

  14. Two-dimensional optical tomography of hemodynamic changes in a preterm infant brain

    Science.gov (United States)

    Gao, Feng; Xue, Yuan; Zhao, Huijuan; Kusaka, Takashi; Ueno, Masanori; Yamada, Yukio

    2007-08-01

    Our preliminary results on two-dimensional (2D) optical tomographic imaging of hemodynamic changes in a preterm infant brain are reported. We use the established 16-channel time-correlated single photon counting system for the detection and generalized pulse spectrum technique based algorithm for the image reconstruction. The experiments demonstrate that diffuse optical tomography may be a potent means for investigating brain functions and neural development of infant brains in the perinatal period.

  15. Optical Two-Dimensional Spectroscopy of Disordered Semiconductor Quantum Wells and Quantum Dots

    Energy Technology Data Exchange (ETDEWEB)

    Cundiff, Steven T. [Univ. of Colorado, Boulder, CO (United States)

    2016-05-03

    This final report describes the activities undertaken under grant "Optical Two-Dimensional Spectroscopy of Disordered Semiconductor Quantum Wells and Quantum Dots". The goal of this program was to implement optical 2-dimensional Fourier transform spectroscopy and apply it to electronic excitations, including excitons, in semiconductors. Specifically of interest are quantum wells that exhibit disorder due to well width fluctuations and quantum dots. In both cases, 2-D spectroscopy will provide information regarding coupling among excitonic localization sites.

  16. Two-dimensional optical tomography of hemodynamic changes in a preterm infant brain

    Institute of Scientific and Technical Information of China (English)

    Feng Gao; Yuan Xue; Huijuan Zhao; Takashi Kusaka; Masanori Ueno; Yukio Yamada

    2007-01-01

    Our preliminary results on two-dimensional (2D) optical tomographic imaging of hemodynamic changes in a preterm infant brain are reported. We use the established 16-channel time-correlated single photon counting system for the detection and generalized pulse spectrum technique based algorithm for the image reconstruction. The experiments demonstrate that diffuse optical tomography may be a potent means for investigating brain functions and neural development of infant brains in the perinatal period.

  17. Suppression of photothermal convection of microparticles in two dimensional nanoplasmonic optical lattice

    Science.gov (United States)

    Chen, Yi-Chung; Yossifon, Gilad; Yang, Ya-Tang

    2016-11-01

    Photothermal convection has been a major obstacle for stable particle trapping in plasmonic optical tweezer at high optical power. Here, we demonstrate a strategy to suppress the plasmonic photothermal convection by using vanishingly small thermal expansion coefficient of water at low temperature. A simple square nanoplasmonic array is illuminated with a loosely Gaussian beam to produce a two dimensional optical lattice for trapping of micro particles. We observe stable particle trapping due to near-field optical gradient forces at elevated optical power at low temperature. In contrast, for the same optical power at room temperature, the particles are convected away from the center of the optical lattice without their accumulation. This technique will greatly increase usable optical power and enhance the trapping capability of plasmonic optical tweezer.

  18. Optical imaging process based on two-dimensional Fourier transform for synthetic aperture imaging ladar

    Science.gov (United States)

    Sun, Zhiwei; Zhi, Ya'nan; Liu, Liren; Sun, Jianfeng; Zhou, Yu; Hou, Peipei

    2013-09-01

    The synthetic aperture imaging ladar (SAIL) systems typically generate large amounts of data difficult to compress with digital method. This paper presents an optical SAIL processor based on compensation of quadratic phase of echo in azimuth direction and two dimensional Fourier transform. The optical processor mainly consists of one phase-only liquid crystal spatial modulator(LCSLM) to load the phase data of target echo and one cylindrical lens to compensate the quadratic phase and one spherical lens to fulfill the task of two dimensional Fourier transform. We show the imaging processing result of practical target echo obtained by a synthetic aperture imaging ladar demonstrator. The optical processor is compact and lightweight and could provide inherent parallel and the speed-of-light computing capability, it has a promising application future especially in onboard and satellite borne SAIL systems.

  19. A dark-line two-dimensional magneto-optical trap of 85Rb atoms with high optical depth.

    Science.gov (United States)

    Zhang, Shanchao; Chen, J F; Liu, Chang; Zhou, Shuyu; Loy, M M T; Wong, G K L; Du, Shengwang

    2012-07-01

    We describe the apparatus of a dark-line two-dimensional (2D) magneto-optical trap (MOT) of (85)Rb cold atoms with high optical depth (OD). Different from the conventional configuration, two (of three) pairs of trapping laser beams in our 2D MOT setup do not follow the symmetry axes of the quadrupole magnetic field: they are aligned with 45° angles to the longitudinal axis. Two orthogonal repumping laser beams have a dark-line volume in the longitudinal axis at their cross over. With a total trapping laser power of 40 mW and repumping laser power of 18 mW, we obtain an atomic OD up to 160 in an electromagnetically induced transparency (EIT) scheme, which corresponds to an atomic-density-length product NL = 2.05 × 10(15) m(-2). In a closed two-state system, the OD can become as large as more than 600. Our 2D MOT configuration allows full optical access of the atoms in its longitudinal direction without interfering with the trapping and repumping laser beams spatially. Moreover, the zero magnetic field along the longitudinal axis allows the cold atoms maintain a long ground-state coherence time without switching off the MOT magnetic field, which makes it possible to operate the MOT at a high repetition rate and a high duty cycle. Our 2D MOT is ideal for atomic-ensemble-based quantum optics applications, such as EIT, entangled photon pair generation, optical quantum memory, and quantum information processing.

  20. Use of real Dirac matrices in two-dimensional coupled linear optics

    Science.gov (United States)

    Baumgarten, C.

    2011-11-01

    The Courant-Snyder theory for two-dimensional coupled linear optics is presented, based on the systematic use of the real representation of the Dirac matrices. Since any real 4×4 matrix can be expressed as a linear combination of these matrices, the presented ansatz allows for a comprehensive and complete treatment of two-dimensional linear coupling. A survey of symplectic transformations in two dimensions is presented. A subset of these transformations is shown to be identical to rotations and Lorentz boosts in Minkowski space-time. The transformation properties of the classical state vector are formulated and found to be analog to those of a Dirac spinor. The equations of motion for a relativistic charged particle—the Lorentz force equations—are shown to be isomorph to envelope equations of two-dimensional linear coupled optics. A universal and straightforward method to decouple two-dimensional harmonic oscillators with constant coefficients by symplectic transformations is presented, which is based on this isomorphism. The method yields the eigenvalues (i.e., tunes) and eigenvectors and can be applied to a one-turn transfer matrix or directly to the coefficient matrix of the linear differential equation.

  1. Optical Packet Switching Demostrator

    DEFF Research Database (Denmark)

    Mortensen, Brian Bach; Berger, Michael Stübert

    2002-01-01

    In the IST project DAVID (data and voice integration over DWDM) work is carried out defining possible architectures of future optical packet switched networks. The feasibility of the architecture is to be verified in a demonstration set-up. This article describes the demonstrator set-up and the m......In the IST project DAVID (data and voice integration over DWDM) work is carried out defining possible architectures of future optical packet switched networks. The feasibility of the architecture is to be verified in a demonstration set-up. This article describes the demonstrator set...

  2. Two-dimensional novel optical lattices with multi-well traps for cold atoms or molecules

    Institute of Scientific and Technical Information of China (English)

    Junfa Lu; Xianming Ji; Jianping Yin

    2006-01-01

    We propose some new schemes to constitute two-dimensional (2D) array of multi-well optical dipole traps for cold atoms (or molecules) by using an optical system consisting of a binary π-phase grating and a 2D array of rectangle microlens. We calculate the intensity distribution of each optical well in 2D array of multi-well traps and its geometric parameters and so on. The proposed 2D array of multi-well traps can be used to form novel 2D optical lattices with cold atoms (or molecules), and form various novel optical crystals with cold atoms (or molecules), or to perform quantum computing and quantum information processing on an atom chip, even to realize an array of all-optical multi-well atomic (or molecular) BoseEinstein condensates (BECs) on an all-optical integrated atom (or molecule) chip.

  3. New Two-dimensional Modified Quadratic Congruence Code/Optical Orthogonal Code for OCDMA

    Institute of Scientific and Technical Information of China (English)

    WANG Dong; QIU Luo-lin; ZHANG Jin-rong; TANG Xian-lun; CAO Chang-xiu

    2007-01-01

    A new family of two-dimensional optical orthogonal code(2-DOOC), namely, modified quadratic congruence code(MQCC )/optical orthogonal code(OOC) is proposed who employs MQCC and OOC as wavelength hopping and time-spreading patterns, respectively. Through analyzing the performance of MQCC/OOC, we can see that the correlation properties of the MQCC/OOC are still ideal. Simultaneously, our analysis shows that the proposed new code families can get more cardinalities than other codes and can improve the bit error rate(BER) of optical code division multiple access(OCDMA) effectively.

  4. Optical matrix for clock distribution and synchronous operation in two-dimensional array devices

    Science.gov (United States)

    Lee, K. S.; Shu, C.

    1996-06-01

    A scheme to generate an optical matrix from a mode-locked Nd:YAG laser has been theoretically explored and experimentally demonstrated. The matrix consists of highly synchronized and sequentially delayed optical pulses suitable for use with two-dimensional array optoelectronic devices and clock distribution system. The output pulses have the same state of polarization and no timing jitter is produced among the elements. Encoded outputs have been generated from the matrix using a set of photomasks. This technique can be applied to high-speed optical parallel processing.

  5. Fast fringe-field switching of a liquid crystal cell by two-dimensional confinement with virtual walls

    Science.gov (United States)

    Choi, Tae-Hoon; Oh, Seung-Won; Park, Young-Jin; Choi, Yeongyu; Yoon, Tae-Hoon

    2016-06-01

    We report a simple method for reducing the response time of a fringe-field switching liquid crystal cell by using two-dimensional confinement of the liquid crystals. Through both numerical calculations and experiments, we show that the switching speed can be increased by several fold in a fringe-field switching cell by simply using a rubbing angle of zero, which causes virtual walls to be built when an electric field is applied between the interdigitated electrodes and the common electrode, without requiring additional fabrication steps or complicated drive schemes. Furthermore, the devices fabricated with this method exhibit a reduced color shift and excellent dynamic stability, even with a high applied voltage and under external pressure.

  6. Optical properties of two-dimensional (2D) CdSe nanostructures

    Science.gov (United States)

    Cherevkov, S. A.; Baranov, A. V.; Fedorov, A. V.; Litvin, A. P.; Artemyev, M. V.; Prudnikau, A. V.

    2013-09-01

    The resonant and off-resonant Raman spectra of optical phonons in two-dimensional CdSe nanocrystals of 5, 6, and 7 monolayers are analysed. The spectra are dominated by SO and LO phonon bands of CdSe, whose frequencies are thickness-independent in the off-resonant Raman scattering but demonstrate an evident thickness dependence in the case of the resonant Raman scattering.

  7. Computation and validation of two-dimensional PSF simulation based on physical optics

    CERN Document Server

    Tayabaly, K; Sironi, G; Canestrari, R; Lavagna, M; Pareschi, G

    2016-01-01

    The Point Spread Function (PSF) is a key figure of merit for specifying the angular resolution of optical systems and, as the demand for higher and higher angular resolution increases, the problem of surface finishing must be taken seriously even in optical telescopes. From the optical design of the instrument, reliable ray-tracing routines allow computing and display of the PSF based on geometrical optics. However, such an approach does not directly account for the scattering caused by surface microroughness, which is interferential in nature. Although the scattering effect can be separately modeled, its inclusion in the ray-tracing routine requires assumptions that are difficult to verify. In that context, a purely physical optics approach is more appropriate as it remains valid regardless of the shape and size of the defects appearing on the optical surface. Such a computation, when performed in two-dimensional consideration, is memory and time consuming because it requires one to process a surface map wit...

  8. A two-dimensionally focusing, quasi-optical antenna for millimeter-wave scattering in plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Idehara, T.; Tatsukawa, T. (Faculty of Engineering, Fukui University, Fukui 910, Japan (JP)); Brand, G.F.; Fekete, P.W.; Moore, K.J. (School of Physics, University of Sydney, NSW 2006 (Australia))

    1990-06-01

    A two-dimensionally focusing, quasi-optical antenna having one elliptical reflector and one parabolic reflector has been built for use with a tunable gyrotron in order to carry out millimeter-wave scattering measurements on the TORTUS tokamak plasma at the University of Sydney. The advantages of this antenna are the following: (1) The elliptical reflector focuses the radiation beam in the toroidal direction, while the parabolic reflector focuses in the direction of major radius. This gives excellent two-dimensional focusing in the plasma region, and consequently excellent spatial resolution. (2) The focal point can be easily swept along the direction of major radius in the whole plasma region, simply by changing the angle of the parabolic reflector by a small amount. These features have been demonstrated experimentally using the tunable gyrotron source, GYROTRON III, and in computations of the radiated fields.

  9. Terahertz magneto-optical spectroscopy of a two-dimensional hole gas

    Energy Technology Data Exchange (ETDEWEB)

    Kamaraju, N., E-mail: nkamaraju@lanl.gov; Taylor, A. J.; Prasankumar, R. P., E-mail: rpprasan@lanl.gov [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Pan, W.; Reno, J. [Sandia National Laboratories, Albuquerque, New Mexico 87123 (United States); Ekenberg, U. [Semiconsultants, Brunnsgrnd 12, SE-18773 Täby (Sweden); Gvozdić, D. M. [School of Electrical Engineering, University of Belgrade, Belgrade 11120 (Serbia); Boubanga-Tombet, S. [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Research Institute of Electrical Communication, Tohoku University, 2-1-1 Katahira, Aoba-Ku, Sendai (Japan); Upadhya, P. C. [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Laboratory for Electro-Optics Systems, Indian Space Research Organization, Bangalore 560058 (India)

    2015-01-19

    Two-dimensional hole gases (2DHGs) have attracted recent attention for their unique quantum physics and potential applications in areas including spintronics and quantum computing. However, their properties remain relatively unexplored, motivating the use of different techniques to study them. We used terahertz magneto-optical spectroscopy to investigate the cyclotron resonance frequency in a high mobility 2DHG, revealing a nonlinear dependence on the applied magnetic field. This is shown to be due to the complex non-parabolic valence band structure of the 2DHG, as verified by multiband Landau level calculations. We also find that impurity scattering dominates cyclotron resonance decay in the 2DHG, in contrast with the dominance of superradiant damping in two-dimensional electron gases. Our results shed light on the properties of 2DHGs, motivating further studies of these unique 2D nanosystems.

  10. Two-dimensional dissipative rogue waves due to time-delayed feedback in cavity nonlinear optics

    Science.gov (United States)

    Tlidi, Mustapha; Panajotov, Krassimir

    2017-01-01

    We demonstrate a way to generate two-dimensional rogue waves in two types of broad area nonlinear optical systems subject to time-delayed feedback: in the generic Lugiato-Lefever model and in the model of a broad-area surface-emitting laser with saturable absorber. The delayed feedback is found to induce a spontaneous formation of rogue waves. In the absence of delayed feedback, spatial pulses are stationary. The rogue waves are exited and controlled by the delay feedback. We characterize their formation by computing the probability distribution of the pulse height. The long-tailed statistical contribution, which is often considered as a signature of the presence of rogue waves, appears for sufficiently strong feedback. The generality of our analysis suggests that the feedback induced instability leading to the spontaneous formation of two-dimensional rogue waves is a universal phenomenon.

  11. Drude Weight,Optical Conductivity of Two-Dimensional Hubbard Model at Half Filling

    Institute of Scientific and Technical Information of China (English)

    XU Lei; ZHANG Jun

    2008-01-01

    We study the Drude weight D and optical conductivity of the two-dimensional (2D) Hubbard model at half filling with staggered magnetic flux (SMF).When SMF being introduced,the hopping integrals are modulated by the magnetic flux.The optical sum rule,which is related to the mean kinetic energy of band electrons,is evaluated for this 2D Hubbard Hamiltonian.Our present result gives the dependence of the kinetic energy,D and the optical conductivity on SMF and U.At half filling D vanishes exponentially with system size.We also find in the frequency dependence of the optical conductivity,there is &function peak at ω≈2|m|U and the incoherent excitations begin to present themselves extended to a higher energy region.

  12. The longitudinal optical conductivity in bilayer graphene and other two-dimensional systems

    Energy Technology Data Exchange (ETDEWEB)

    Yang, C.H., E-mail: chyang@nuist.edu.cn [School of Physics and Optoelectronic Engineering, Nanjing University of Information Science and Technology, Nanjing 210044 (China); Ao, Z.M., E-mail: zhimin.ao@uts.edu.au [Centre for Clean Energy Technology, School of Chemistry and Forensic Science, University of Technology, Sydney ,PO Box 123, Broadway, Sydney, NSW 2007 (Australia); Wei, X.F. [West Anhui University, Luan 237012 (China); Jiang, J.J. [Department of Physics, Sanjing College, Nanjing 210012 (China)

    2015-01-15

    The longitudinal optical conductivity in bilayer graphene is calculated using the dielectric function by defining the density operator theoretically, while the effect of the broadening width determined by the scattering sources on the optical conductivity is also investigated. Some features, such as chirality, energy dispersion and density of state (DOS) in bilayer graphene, are similar to those in monolayer graphene and a traditional two-dimensional electron gas (2DEG). Therefore, in this paper, the bilayer graphene optical conductivity is compared with the results in these two systems. The analytical and numerical results show that the optical conductivity per graphene layer is almost a constant and close to e{sup 2}/(4ℏ), which agrees with the experimental results.

  13. Digital optical phase conjugation for delivering two-dimensional images through turbid media.

    Science.gov (United States)

    Hillman, Timothy R; Yamauchi, Toyohiko; Choi, Wonshik; Dasari, Ramachandra R; Feld, Michael S; Park, YongKeun; Yaqoob, Zahid

    2013-01-01

    Optical transmission through complex media such as biological tissue is fundamentally limited by multiple light scattering. Precise control of the optical wavefield potentially holds the key to advancing a broad range of light-based techniques and applications for imaging or optical delivery. We present a simple and robust digital optical phase conjugation (DOPC) implementation for suppressing multiple light scattering. Utilizing wavefront shaping via a spatial light modulator (SLM), we demonstrate its turbidity-suppression capability by reconstructing the image of a complex two-dimensional wide-field target through a highly scattering medium. Employing an interferometer with a Sagnac-like ring design, we successfully overcome the challenging alignment and wavefront-matching constraints in DOPC, reflecting the requirement that the forward- and reverse-propagation paths through the turbid medium be identical. By measuring the output response to digital distortion of the SLM write pattern, we validate the sub-wavelength sensitivity of the system.

  14. Two-dimensional photonic-crystal-based double switch-divider.

    Science.gov (United States)

    Dmitriev, Victor; Martins, Leno

    2016-05-01

    We propose and investigate a new multifunctional component, consisting of a T-junction of three waveguides in 2D photonic crystal with a square lattice. One waveguide is the input port, while the other two serve as output ports. This component can fulfil three functions: First, it can switch OFF the two output ports; second, our component can be used as a 3 dB divider of the input power; and third, it can switch ON any one of the two output ports. Changing the regime is achieved by a DC magnetic field that magnetizes a cylindrical ferrite resonator placed in the T-junction. We present an analysis of the scattering matrices of the component and calculated frequency characteristics in the low terahertz region. In the frequency band of about 1 GHz with a central frequency of f=98.46  GHz, the device has the following parameters: isolation of the output ports from the input port in the first regime is better than -30  dB, division of the input signal is about (-3.8±1.0)  dB in the second regime, and isolation in the regime switch ON, where any one of the two output ports is higher than -15  dB and the insertion loss is lower than -2.0  dB.

  15. Two-dimensional refractive index modulation by phased array transducers in acousto-optic deflectors.

    Science.gov (United States)

    Wang, Tiansi; Zhang, Chong; Aleksov, Aleksandar; Salama, Islam; Kar, Aravinda

    2017-01-20

    Acousto-optic deflectors are photonic devices that are used for scanning high-power laser beams in advanced microprocessing applications such as marking and direct writing. The operation of conventional deflectors mostly relies on one-dimensional sinusoidal variation of the refractive index in an acousto-optic medium. Sometimes static phased array transducers, such as step configuration or planar configuration transducer architecture, are used to tilt the index modulation planes for achieving higher performance and higher resolution than a single transducer AO device. However, the index can be modulated in two dimensions, and the modulation plane can be tilted arbitrarily by creating dynamic phase gratings in the medium using phased array transducers. This type of dynamic two-dimensional acousto-optic deflector can provide better performance using, for example, a large deflection angle and high diffraction efficiency. This paper utilizes an ultrasonic beam steering approach to study the two-dimensional strain-induced index modulation due to the photoelastic effect. The modulation is numerically simulated, and the effects of various parameters, such as the operating radiofrequency of the transducers, the ultrasonic beam steering angle, and different combinations of pressure on each element of the transducer array, are demonstrated.

  16. Test of a two-dimensionally focusing quasi-optical antenna using a gyrotron

    Energy Technology Data Exchange (ETDEWEB)

    Idehara, T.; Tatsukawa, T.; Brand, G.F.; Fekete, P.W.; Moore, K.J.

    1989-05-01

    A quasi-optical antenna having one elliptical reflector and one parabolic reflector has been built for millimeter wave scattering measurements on the TORTUS tokamak plasma at the University of Sydney. This letter reports the first demonstration of the properties of such an antenna using a gyrotron millimeter wave source. Its advantages are (1) good two-dimensional focusing (along the major radius and the toroidal directions) and (2) easy movement of the focus across the diameter of the plasma by changing the orientation of the parabolic reflector.

  17. Fundamental and vortex solitons in a two-dimensional optical lattice

    CERN Document Server

    Yang, J; Yang, Jianke; Musslimani, Ziad

    2003-01-01

    Fundamental and vortex solitons in a two-dimensional optically induced waveguide array are reported. In the strong localization regime, the fundamental soliton is largely confined to one lattice site, while the vortex state comprises of four fundamental modes superimposed in a square configuration with a phase structure that is topologically equivalent to the conventional vortex. However, in the weak localization regime, both the fundamental and vortex solitons spread over many lattice sites. We further show that fundamental and vortex solitons are stable against small perturbations in the strong localization regime.

  18. Optical gaps, mode patterns and dipole radiation in two-dimensional aperiodic photonic structures

    Science.gov (United States)

    Boriskina, Svetlana V.; Gopinath, Ashwin; Negro, Luca Dal

    2009-05-01

    Based on the rigorous generalized Mie theory solution of Maxwell's equations for dielectric cylinders we theoretically investigate the optical properties of two-dimensional deterministic structures based on the Fibonacci, Thue-Morse and Rudin-Shapiro aperiodic sequences. In particular, we investigate bandgap formation and mode localization properties in aperiodic photonic structures based on the accurate calculation of their local density of states (LDOS). In addition, we explore the potential of photonic structures based on aperiodic order for the engineering of radiative rates and emission patterns in erbium-doped silicon-rich nitride photonic structures.

  19. Phase Transition and Superfluid of Photons and Photon Pairs in a Two-Dimensional Optical Microcavity

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jian-Jun; YUAN Jian-Hui; ZHANG Jun-Pei; CHENG Ze

    2012-01-01

    We analyze the ground-state properties and the excitation spectrum of Bose Einstein condensates of photons and PPs in a two-dimensional optical microcavity. First, using the variational method, we discuss the ground- state phase transition of the two-component system. We also investigate the energy gap between the ground state and the first excited state. Moreover, by investigating the excitation spectrum, we also illustrate how the superfluid behavior of photons and PPs can be associated with the phase transition of the system.

  20. Two-dimensional optical feedback control of Euglena confined in closed-type microfluidic channels.

    Science.gov (United States)

    Ozasa, Kazunari; Lee, Jeesoo; Song, Simon; Hara, Masahiko; Maeda, Mizuo

    2011-06-07

    We examined two-dimensional (2D) optical feedback control of phototaxis flagellate Euglena cells confined in closed-type microfluidic channels (microaquariums), and demonstrated that the 2D optical feedback enables the control of the density and position of Euglena cells in microaquariums externally, flexibly, and dynamically. Using three types of feedback algorithms, the density of Euglena cells in a specified area can be controlled arbitrarily and dynamically, and more than 70% of the cells can be concentrated into a specified area. Separation of photo-sensitive/insensitive Euglena cells was also demonstrated. Moreover, Euglena-based neuro-computing has been achieved, where 16 imaginary neurons were defined as Euglena-activity levels in 16 individual areas in microaquariums. The study proves that 2D optical feedback control of photoreactive flagellate microbes is promising for microbial biology studies as well as applications such as microbe-based particle transportation in microfluidic channels or separation of photo-sensitive/insensitive microbes.

  1. An Optical Power Divider Based on Two-dimensional Photonic Crystal Structure

    Science.gov (United States)

    Mesri, Nazanin; Alipour-Banaei, Hamed

    2017-05-01

    In this paper, an optical power divider with one input and four outputs has been proposed in a two-dimensional photonic crystal with triangular lattice and simulated using dielectric holes in an air substrate. The dividing properties of the power divider have been numerically simulated and analyzed using the plane wave expansion and finite difference time domain methods. The results show that the transmittance of this divider can be as high as 94.22 % for λ=1.55 µm; thus, the proposed structure is suitable for wavelength division multiplexing communication systems. Also, due to the small footprint of the proposed structure, this optical power divider is applicable for optical-integrated circuit design.

  2. Optical devices combining an organic semiconductor crystal with a two-dimensional inorganic diffraction grating

    Energy Technology Data Exchange (ETDEWEB)

    Kitazawa, Takenori; Yamao, Takeshi, E-mail: yamao@kit.ac.jp; Hotta, Shu [Faculty of Materials Science and Engineering, Kyoto Institute of Technology, Kyoto 606-8585 (Japan)

    2016-02-01

    We have fabricated optical devices using an organic semiconductor crystal as an emission layer in combination with a two-dimensional (2D) inorganic diffraction grating used as an optical cavity. We formed the inorganic diffraction grating by wet etching of aluminum-doped zinc oxide (AZO) under a 2D cyclic olefin copolymer (COC) diffraction grating used as a mask. The COC diffraction grating was fabricated by nanoimprint lithography. The AZO diffraction grating was composed of convex prominences arranged in a triangular lattice. The organic crystal placed on the AZO diffraction grating indicated narrowed peaks in its emission spectrum under ultraviolet light excitation. These are detected parallel to the crystal plane. The peaks were shifted by rotating the optical devices around the normal to the crystal plane, which reflected the rotational symmetries of the triangular lattice through 60°.

  3. Optical vortices: the concept of topological potential and analogies with two-dimensional electrostatics

    CERN Document Server

    Amaral, Anderson M; de Araújo, Cid B

    2015-01-01

    We show how the phase profile of a distribution of topological charges (TC) of an optical vortex (OV) can be described by a potential analogous to the Coulomb's potential for a distribution of electric charges in two-dimensional electrostatics. From what we call the Topological Potential (TP), the properties of TC multipoles and a 2D radial distribution were analyzed. The TC multipoles have a transverse profile that is topologically stable under propagation and may be exploited in optical communications; on the other hand, the 2D distributions can be used to tune the transverse forces in optical tweezers. Considering the analogies with the electrostatics formalism, it is also expected that the TP allows the tailoring of OV for specific applications.

  4. Bound states in optical absorption of semiconductor quantum wells containing a two-dimensional electron Gas

    Science.gov (United States)

    Huard; Cox; Saminadayar; Arnoult; Tatarenko

    2000-01-01

    The dependence of the optical absorption spectrum of a semiconductor quantum well on two-dimensional electron concentration n(e) is studied using CdTe samples. The trion peak (X-) seen at low n(e) evolves smoothly into the Fermi edge singularity at high n(e). The exciton peak (X) moves off to high energy, weakens, and disappears. The X,X- splitting is linear in n(e) and closely equal to the Fermi energy plus the trion binding energy. For Cd0.998Mn0.002Te quantum wells in a magnetic field, the X,X- splitting reflects unequal Fermi energies for M = +/-1/2 electrons. The data are explained by Hawrylak's theory of the many-body optical response including spin effects.

  5. Frequency-domain nonlinear optics in two-dimensionally patterned quasi-phase-matching media

    CERN Document Server

    Phillips, C R; Gallmann, L; Keller, U

    2015-01-01

    Advances in the amplification and manipulation of ultrashort laser pulses has led to revolutions in several areas. Examples include chirped pulse amplification for generating high peak-power lasers, power-scalable amplification techniques, pulse shaping via modulation of spatially-dispersed laser pulses, and efficient frequency-mixing in quasi-phase-matched nonlinear crystals to access new spectral regions. In this work, we introduce and demonstrate a new platform for nonlinear optics which has the potential to combine all of these separate functionalities (pulse amplification, frequency transfer, and pulse shaping) into a single monolithic device. Moreover, our approach simultaneously offers solutions to the performance-limiting issues in the conventionally-used techniques, and supports scaling in power and bandwidth of the laser source. The approach is based on two-dimensional patterning of quasi-phase-matching gratings combined with optical parametric interactions involving spatially dispersed laser pulses...

  6. Theory of edge-state optical absorption in two-dimensional transition metal dichalcogenide flakes

    Science.gov (United States)

    Trushin, Maxim; Kelleher, Edmund J. R.; Hasan, Tawfique

    2016-10-01

    We develop an analytical model to describe sub-band-gap optical absorption in two-dimensional semiconducting transition metal dichalcogenide (s-TMD) nanoflakes. The material system represents an array of few-layer molybdenum disulfide crystals, randomly orientated in a polymer matrix. We propose that optical absorption involves direct transitions between electronic edge states and bulk bands, depends strongly on the carrier population, and is saturable with sufficient fluence. For excitation energies above half the band gap, the excess energy is absorbed by the edge-state electrons, elevating their effective temperature. Our analytical expressions for the linear and nonlinear absorption could prove useful tools in the design of practical photonic devices based on s-TMDs.

  7. Digital chaos-masked optical encryption scheme enhanced by two-dimensional key space

    Science.gov (United States)

    Liu, Ling; Xiao, Shilin; Zhang, Lu; Bi, Meihua; Zhang, Yunhao; Fang, Jiafei; Hu, Weisheng

    2017-09-01

    A digital chaos-masked optical encryption scheme is proposed and demonstrated. The transmitted signal is completely masked by interference chaotic noise in both bandwidth and amplitude with analog method via dual-drive Mach-Zehnder modulator (DDMZM), making the encrypted signal analog, noise-like and unrecoverable by post-processing techniques. The decryption process requires precise matches of both the amplitude and phase between the cancellation and interference chaotic noises, which provide a large two-dimensional key space with the help of optical interference cancellation technology. For 10-Gb/s 16-quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) signal over the maximum transmission distance of 80 km without dispersion compensation or inline amplifier, the tolerable mismatch ranges of amplitude and phase/delay at the forward error correction (FEC) threshold of 3.8×10-3 are 0.44 dB and 0.08 ns respectively.

  8. Q-switched waveguide laser based on two-dimensional semiconducting materials: tungsten disulfide and black phosphorous.

    Science.gov (United States)

    Tan, Yang; Guo, Zhinan; Ma, Linan; Zhang, Han; Akhmadaliev, Shavkat; Zhou, Shengqiang; Chen, Feng

    2016-02-01

    Owing to their unique properties, graphene-like two dimensional semiconducting materials, including Tungsten Disulfide (WS2) and Black Phosphorous (BP), have attracted increasing interest from basic research to practical applications. Herein, we demonstrated the ultrafast nonlinear saturable absorption response of WS2 and BP films in the waveguide structure. Through fabricating WS2 and BP films by evaporating the solutions on glass wafers. Saturable absorber films were attached onto the end-facet of the waveguide, which therefore constitutes a resonant cavity for the waveguide laser. Under a pump laser at 810 nm, we could obtain a stable Q-switched operation in the waveguide structure. This work indicated the significant potential of WS2 and BP for the ultrafast waveguide laser.

  9. Local switching of two-dimensional superconductivity using the ferroelectric field effect

    Science.gov (United States)

    Takahashi, K. S.; Gabay, M.; Jaccard, D.; Shibuya, K.; Ohnishi, T.; Lippmaa, M.; Triscone, J.-M.

    2006-05-01

    Correlated oxides display a variety of extraordinary physical properties including high-temperature superconductivity and colossal magnetoresistance. In these materials, strong electronic correlations often lead to competing ground states that are sensitive to many parameters-in particular the doping level-so that complex phase diagrams are observed. A flexible way to explore the role of doping is to tune the electron or hole concentration with electric fields, as is done in standard semiconductor field effect transistors. Here we demonstrate a model oxide system based on high-quality heterostructures in which the ferroelectric field effect approach can be studied. We use a single-crystal film of the perovskite superconductor Nb-doped SrTiO3 as the superconducting channel and ferroelectric Pb(Zr,Ti)O3 as the gate oxide. Atomic force microscopy is used to locally reverse the ferroelectric polarization, thus inducing large resistivity and carrier modulations, resulting in a clear shift in the superconducting critical temperature. Field-induced switching from the normal state to the (zero resistance) superconducting state was achieved at a well-defined temperature. This unique system could lead to a field of research in which devices are realized by locally defining in the same material superconducting and normal regions with `perfect' interfaces, the interface being purely electronic. Using this approach, one could potentially design one-dimensional superconducting wires, superconducting rings and junctions, superconducting quantum interference devices (SQUIDs) or arrays of pinning centres.

  10. Nonlinear localized modes in dipolar Bose–Einstein condensates in two-dimensional optical lattices

    Energy Technology Data Exchange (ETDEWEB)

    Rojas-Rojas, Santiago, E-mail: srojas@cefop.cl [Center for Optics and Photonics and MSI-Nucleus on Advanced Optics, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Departamento de Física, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Naether, Uta [Instituto de Ciencia de Materiales de Aragón and Departamento de Física de la Materia Condensada, CSIC-Universidad de Zaragoza, 50009 Zaragoza (Spain); Delgado, Aldo [Center for Optics and Photonics and MSI-Nucleus on Advanced Optics, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Departamento de Física, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Vicencio, Rodrigo A. [Center for Optics and Photonics and MSI-Nucleus on Advanced Optics, Universidad de Concepción, Casilla 160-C, Concepción (Chile); Departamento de Física, Facultad de Ciencias, Universidad de Chile, Santiago (Chile)

    2016-09-16

    Highlights: • We study discrete two-dimensional breathers in dipolar Bose–Einstein Condensates. • Important differences in the properties of three fundamental modes are found. • Norm threshold for existence of 2D breathers varies with dipolar interaction. • The Effective Potential Method is implemented for stability analysis. • Uncommon mobility of 2D discrete solitons is observed. - Abstract: We analyze the existence and properties of discrete localized excitations in a Bose–Einstein condensate loaded into a periodic two-dimensional optical lattice, when a dipolar interaction between atoms is present. The dependence of the Number of Atoms (Norm) on the energy of solutions is studied, along with their stability. Two important features of the system are shown, namely, the absence of the Norm threshold required for localized solutions to exist in finite 2D systems, and the existence of regions in the parameter space where two fundamental solutions are simultaneously unstable. This feature enables mobility of localized solutions, which is an uncommon feature in 2D discrete nonlinear systems. With attractive dipolar interaction, a non-trivial behavior of the Norm dependence is obtained, which is well described by an analytical model.

  11. Theory of tailorable optical response of two-dimensional arrays of plasmonic nanoparticles at dielectric interfaces

    Science.gov (United States)

    Sikdar, Debabrata; Kornyshev, Alexei A.

    2016-01-01

    Two-dimensional arrays of plasmonic nanoparticles at interfaces are promising candidates for novel optical metamaterials. Such systems materialise from ‘top–down’ patterning or ‘bottom–up’ self-assembly of nanoparticles at liquid/liquid or liquid/solid interfaces. Here, we present a comprehensive analysis of an extended effective quasi-static four-layer-stack model for the description of plasmon-resonance-enhanced optical responses of such systems. We investigate in detail the effects of the size of nanoparticles, average interparticle separation, dielectric constants of the media constituting the interface, and the nanoparticle position relative to the interface. Interesting interplays of these different factors are explored first for normally incident light. For off-normal incidence, the strong effects of the polarisation of light are found at large incident angles, which allows to dynamically tune the reflectance spectra. All the predictions of the theory are tested against full-wave simulations, proving this simplistic model to be adequate within the quasi-static limit. The model takes seconds to calculate the system’s optical response and makes it easy to unravel the effect of each system parameter. This helps rapid rationalization of experimental data and understanding of the optical signals from these novel ‘metamaterials’, optimised for light reflection or harvesting. PMID:27652788

  12. High-Resolution Two-Dimensional Optical Spectroscopy of Electron Spins

    Science.gov (United States)

    Salewski, M.; Poltavtsev, S. V.; Yugova, I. A.; Karczewski, G.; Wiater, M.; Wojtowicz, T.; Yakovlev, D. R.; Akimov, I. A.; Meier, T.; Bayer, M.

    2017-07-01

    Multidimensional coherent optical spectroscopy is one of the most powerful tools for investigating complex quantum mechanical systems. While it was conceived decades ago in magnetic resonance spectroscopy using microwaves and radio waves, it has recently been extended into the visible and UV spectral range. However, resolving MHz energy splittings with ultrashort laser pulses still remains a challenge. Here, we analyze two-dimensional Fourier spectra for resonant optical excitation of resident electrons to localized trions or donor-bound excitons in semiconductor nanostructures subject to a transverse magnetic field. Particular attention is devoted to Raman coherence spectra, which allow one to accurately evaluate tiny splittings of the electron ground state and to determine the relaxation times in the electron spin ensemble. A stimulated steplike Raman process induced by a sequence of two laser pulses creates a coherent superposition of the ground-state doublet which can be retrieved only optically because of selective excitation of the same subensemble with a third pulse. This provides the unique opportunity to distinguish between different complexes that are closely spaced in energy in an ensemble. The related experimental demonstration is based on photon-echo measurements in an n -type CdTe /(Cd ,Mg )Te quantum-well structure detected by a heterodyne technique. The difference in the sub-μ eV range between the Zeeman splittings of donor-bound electrons and electrons localized at potential fluctuations can be resolved even though the homogeneous linewidth of the optical transitions is larger by 2 orders of magnitude.

  13. Two-dimensional refractive index and birefringence profiles of a graded index bent optical fibre

    Science.gov (United States)

    Ramadan, W. A.; Wahba, H. H.; Shams El-Din, M. A.

    2017-07-01

    A theory to recover refractive index profile of the bent graded index (GRIN) optical fibre, in core region, is proposed. This theory is applied to the bent GRIN optical fibre when it is located orthogonal in the light path of the object arm in digital holographic phase shifting interferometer; like Mach-Zehnder interferometer. In the experiment, the fibre is bent with two different bending radii and fixed on a microscope slide keeping it immersed in matching liquid. The produced phase shifted holograms, with the presence of the fibre, are recorded using an attached CCD camera. Two different processes controlling the index profile shape of the bent GRIN optical fibre are assumed. In the first process, a linear index variation is evolved from stresses in the direction of the bent radius. In the second one, there is a release of these stresses near the fibre surface, which depends on the fibre's radius. This will affect the outer free surface of the cladding. Based on these assumptions, we are able to construct the index profile in two dimensions normal to the optical axis. We propose two functions to describe the refractive index profiles in cladding and the core regions of the bent GRIN optical fibre. The recorded phase shifted holograms are combined, reconstructed and analyzed to get the phase map of the bent GRIN optical fibre. Comparing the extracted optical phase differences with the calculated ones, a good agreement between them is found. This means that the used two dimensional proposed functions, which are describing cladding and the core indices profiles, are the most proper in this situation. Thus, we are able to determine a realistic induced birefringence profile inside the fibre which is generated by a bending operation, not only in the cladding but also in graded index core region as well.

  14. Study on electro-optic properties of two-dimensional PLZT photonic crystal band structure

    Institute of Scientific and Technical Information of China (English)

    TONG Kai; WU Xiao-gang; WANG Mei-ting

    2011-01-01

    The band characteristics of two-dimensional (2D) lead lanthanum zirconate titanate (PLZT) photonic cystals are analyzed by finite element method. The electro-optic effect of PLZT can cause the refractive index change when it is imposed by the applied electric field, and the band structure of 2D photonic crystals based on PLZT varies accordingly. The effect of the applied electric field on the structural characteristics of the first and second band gaps in 2D PLZT photonic crystals is analyzed in detail. And the results show that for each band gap, the variations of start wavelength, cut-off wavelength and bandwidth are proportional to quadratic of the electric field.

  15. Fiber-optic interferometric two-dimensional scattering-measurement system.

    Science.gov (United States)

    Zhu, Yizheng; Giacomelli, Michael G; Wax, Adam

    2010-05-15

    We present a fiber-optic interferometric system for measuring depth-resolved scattering in two angular dimensions using Fourier-domain low-coherence interferometry. The system is a unique hybrid of the Michelson and Sagnac interferometer topologies. The collection arm of the interferometer is scanned in two dimensions to detect angular scattering from the sample, which can then be analyzed to determine the structure of the scatterers. A key feature of the system is the full control of polarization of both the illumination and the collection fields, allowing for polarization-sensitive detection, which is essential for two-dimensional angular measurements. System performance is demonstrated using a double-layer microsphere phantom. Experimental data from samples with different sizes and acquired with different polarizations show excellent agreement with Mie theory, producing structural measurements with subwavelength accuracy.

  16. Development of a novel two dimensional surface plasmon resonance sensor using multiplied beam splitting optics.

    Science.gov (United States)

    Hemmi, Akihide; Mizumura, Ryosuke; Kawanishi, Ryuta; Nakajima, Hizuru; Zeng, Hulie; Uchiyama, Katsumi; Kaneki, Noriaki; Imato, Toshihiko

    2013-01-08

    A novel two dimensional surface plasmon resonance (SPR) sensor system with a multi-point sensing region is described. The use of multiplied beam splitting optics, as a core technology, permitted multi-point sensing to be achieved. This system was capable of simultaneously measuring nine sensing points. Calibration curves for sucrose obtained on nine sensing points were linear in the range of 0-10% with a correlation factor of 0.996-0.998 with a relative standard deviation of 0.090-4.0%. The detection limits defined as S/N = 3 were 1.98 × 10(-6) - 3.91 × 10(-5) RIU. This sensitivity is comparable to that of conventional SPR sensors.

  17. Development of a Novel Two Dimensional Surface Plasmon Resonance Sensor Using Multiplied Beam Splitting Optics

    Directory of Open Access Journals (Sweden)

    Akihide Hemmi

    2013-01-01

    Full Text Available A novel two dimensional surface plasmon resonance (SPR sensor system with a multi-point sensing region is described. The use of multiplied beam splitting optics, as a core technology, permitted multi-point sensing to be achieved. This system was capable of simultaneously measuring nine sensing points. Calibration curves for sucrose obtained on nine sensing points were linear in the range of 0–10% with a correlation factor of 0.996–0.998 with a relative standard deviation of 0.090–4.0%. The detection limits defined as S/N = 3 were 1.98 × 10−6–3.91 × 10−5 RIU. This sensitivity is comparable to that of conventional SPR sensors.

  18. Two-dimensional discrete wavelets transform for optical phase extraction: application on speckle correlation fringes

    Science.gov (United States)

    Ghlaifan, Abdulatef; Tounsi, Yassine; Zada, Sara; Muhire, Desire; Nassim, Abdelkrim

    2016-12-01

    A method for optical phase extraction based on two-dimensional discrete wavelets transform (2-DWT) decomposition is shown. From modulated fringe pattern, phase distribution is extracted by the ratio between detail and approximation. Modulation process is realized digitally by introducing high-frequency spatial carrier, and this process needs two π/2-shifted fringe patterns. We propose to use only single fringe and generate its quadrature by spiral phase transform (SPT). After validation by computer simulation, we apply the 2-DWT algorithm on experimental speckle fringe correlation taken for hard disk surface. The extracted phase using SPT quadrature was compared with that given using this time experimental quadrature, and we show a good performance by multiscale structural similarity metric.

  19. Pair formation in Fermi systems with population imbalance in one- and two-dimensional optical lattices

    Science.gov (United States)

    Batrouni, George

    2011-03-01

    I will discuss pairing in fermionic systems in one- and two-dimensional optical lattices with population imbalance. This will be done in the context of the attractive fermionic Hubbard model using the Stochastic Green Function algorithm in d=1 while for d=2 we use Determinant Quantum Monte Carlo. This is the first exact QMC study examining the effects of finite temperature which is very important in experiments on ultra-cold atoms. Our results show that, in the ground state, the dominant pairing mechanism is at nonzero center of mass momentum, i.e. FFLO. I will then discuss the effect of finite temperature in the uniform and confined systems and present finite temperature phase diagrams. The numerical results will be compared with experiments. With M. J. Wolak (CQT, National University of Singapore) and V. G. Rousseau (Department of Physics and Astronomy, Louisiana State University).

  20. Physical secure enhancement in optical OFDMA-PON based on two-dimensional scrambling.

    Science.gov (United States)

    Zhang, Lijia; Xin, Xiangjun; Liu, Bo; Yin, Xiaoli

    2012-12-10

    This paper proposes a novel physical-enhanced chaotic secure strategy for optical OFDMA-PON based on two-dimensional (2-D) scrambling. In order to enhance the physical security, a multi-layer chaotic mapping is proposed to generate the scrambling vectors. It can enhance the chaotic characteristic of Logistic mapping and increase the key space. Furthermore, the 2-D scrambling jointly utilizing frequency subcarriers and time-slots can improve the system resistance to eavesdropper. The feasibility of 15.6 Gb/s 2-D encrypted 64QAM-OFDM downstream signal has been successfully demonstrated in the experiment. The robustness of the proposed method shows its prospect in future OFDM access network.

  1. Two-dimensional phase unwrapping in Doppler Fourier domain optical coherence tomography.

    Science.gov (United States)

    Wang, Yimin; Huang, David; Su, Ya; Yao, X Steve

    2016-11-14

    For phase-related imaging modalities using interferometric techniques, it is important to develop effective method to recover phase information that is mathematically wrapped. In this paper, we propose and demonstrate a two-dimensional (2D) method to achieve effective phase unwrapping in Doppler Fourier-domain (FD) optical coherence tomography (OCT), and recover the discontinuous phase distribution in retinal blood flow successfully for the first time in Doppler OCT studies. The proposed method is based on phase gradient approach in the axial dimension, with phase denoising performed through 2D window moving average in the sampled phase image using complex Doppler OCT data. The 2D unwrapping is carried out to correct phase discontinuities in the wrapped Doppler phase map, and the abrupt phase changes can be identified and corrected accurately. The proposed algorithm is computationally efficient and easy to be implemented.

  2. Resonant state expansion applied to two-dimensional open optical systems

    CERN Document Server

    Doost, M B; Muljarov, E A

    2013-01-01

    The resonant state expansion (RSE), a rigorous perturbative method in electrodynamics, is applied to two-dimensional open optical systems. The analytically solvable homogeneous dielectric cylinder is used as unperturbed system, and its Green's function is shown to contain a cut in the complex frequency plane, which is included in the RSE basis. The complex eigenfrequencies of modes are calculated using the RSE for a selection of perturbations which mix unperturbed modes of different orbital momentum, such as half-cylinder, thin-film and thin-wire perturbation, demonstrating the accuracy and convergency of the method. The resonant states for the thin-wire perturbation are shown to reproduce an approximative analytical solution.

  3. Fluorescence-detected two-dimensional electronic coherence spectroscopy by acousto-optic phase modulation.

    Science.gov (United States)

    Tekavec, Patrick F; Lott, Geoffrey A; Marcus, Andrew H

    2007-12-07

    Two-dimensional electronic coherence spectroscopy (ECS) is an important method to study the coupling between distinct optical modes of a material system. Such studies often involve excitation using a sequence of phased ultrashort laser pulses. In conventional approaches, the delays between pulse temporal envelopes must be precisely monitored or maintained. Here, we introduce a new experimental scheme for phase-selective nonlinear ECS, which combines acousto-optic phase modulation with ultrashort laser excitation to produce intensity modulated nonlinear fluorescence signals. We isolate specific nonlinear signal contributions by synchronous detection, with respect to appropriately constructed references. Our method effectively decouples the relative temporal phases from the pulse envelopes of a collinear train of four sequential pulses. We thus achieve a robust and high signal-to-noise scheme for phase-selective ECS to investigate the resonant nonlinear optical response of photoluminescent systems. We demonstrate the validity of our method using a model quantum three-level system-atomic Rb vapor. Moreover, we show how our measurements determine the resonant complex-valued third-order susceptibility.

  4. Tunable electronic and optical behaviors of two-dimensional germanium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhuo; Li, Yangping, E-mail: liyp@nwpu.edu.cn; Li, Chenxi; Liu, Zhengtang

    2016-03-30

    Graphical abstract: In-plane and biaxial strain effects can provide a wide band gap engineering and new options of interband transitions for 2d-GeC in application of optoelectronic devices. - Highlights: • Tunable band structures when in-plane strain is applied on monolayer GeC. • Tunable electronic and optical properties of bilayer under strain along the c axis. • Tunable band structures are observed in multilayer GeC. - Abstract: The electronic and optical properties of two-dimensional graphene-like germanium carbide (2D-GeC) are calculated using first-principle calculation based on density functional theory. Monolayer GeC has a direct band gap of 2.19 eV. The imaginary part of the dielectric function shows a wide energy range of absorption spectrum for monolayer GeC. Tunable band structures are found for monolayer GeC through in-plane strain. In addition, the band structures and optical properties of bilayer GeC under strain along the c axis are analyzed. Multilayer GeC exhibits a direct band gap like monolayer GeC, and new options of interband transitions are found between layers. The results suggest that 2D-GeC could be a good candidate for optoelectronic such as light-emitting diodes, photodiodes, and solar cells.

  5. Investigation of Two-Dimensional Transition Metal Dichalcogenides by Optical and Scanning Tunneling Spectroscopy

    Science.gov (United States)

    Rigosi, Albert F.

    The goal of this dissertation is not only to present works completed and projects initiated and accomplished, but to also attempt to teach some of the material to readers who have limited exposure to condensed matter. I will offer an introduction to two-dimensional transition metal dichalcogenide materials (2D TMDCs) and the mathematics required to understand the research conducted. Some effort will be given on explaining the experimental setups and preparations. Projects that required elaborate sample fabrication and the yielded results will be summarized. These results have heavy implications for the science behind bound electron-hole pairs, the effects of magnetic fields on such pairs, and extracting the useful optical properties from the material systems in which these pairs reside. Specialized fabrication techniques of samples for longer term projects that I led will also be presented, namely those of constructing heterostructures by stacking various 2D TMDCs for exploring the modulated properties of these novel arrangements. The latter portion of this dissertation will cover the nanoscopic dynamics of TMDC heterostructures. The Kramers-Kronig relations will be derived and discussed in detail. Data and results regarding the electronic structure of these materials, their heterostructures, and their custom alloys measured via scanning tunneling microscopy will be presented. Coupled with the measured optical properties, significant numerical quantities that characterize these materials are extracted. There will be several appendices that offer some supplementary information and basic summaries about all the projects that were initiated.

  6. High-Resolution Two-Dimensional Optical Spectroscopy of Electron Spins

    Directory of Open Access Journals (Sweden)

    M. Salewski

    2017-08-01

    Full Text Available Multidimensional coherent optical spectroscopy is one of the most powerful tools for investigating complex quantum mechanical systems. While it was conceived decades ago in magnetic resonance spectroscopy using microwaves and radio waves, it has recently been extended into the visible and UV spectral range. However, resolving MHz energy splittings with ultrashort laser pulses still remains a challenge. Here, we analyze two-dimensional Fourier spectra for resonant optical excitation of resident electrons to localized trions or donor-bound excitons in semiconductor nanostructures subject to a transverse magnetic field. Particular attention is devoted to Raman coherence spectra, which allow one to accurately evaluate tiny splittings of the electron ground state and to determine the relaxation times in the electron spin ensemble. A stimulated steplike Raman process induced by a sequence of two laser pulses creates a coherent superposition of the ground-state doublet which can be retrieved only optically because of selective excitation of the same subensemble with a third pulse. This provides the unique opportunity to distinguish between different complexes that are closely spaced in energy in an ensemble. The related experimental demonstration is based on photon-echo measurements in an n-type CdTe/(Cd,MgTe quantum-well structure detected by a heterodyne technique. The difference in the sub-μeV range between the Zeeman splittings of donor-bound electrons and electrons localized at potential fluctuations can be resolved even though the homogeneous linewidth of the optical transitions is larger by 2 orders of magnitude.

  7. Optical Properties and Wave Propagation in Semiconductor-Based Two-Dimensional Photonic Crystals

    Energy Technology Data Exchange (ETDEWEB)

    Agio, Mario [Iowa State Univ., Ames, IA (United States)

    2002-12-31

    This work is a theoretical investigation on the physical properties of semiconductor-based two-dimensional photonic crystals, in particular for what concerns systems embedded in planar dielectric waveguides (GaAs/AlGaAs, GaInAsP/InP heterostructures, and self-standing membranes) or based on macro-porous silicon. The photonic-band structure of photonic crystals and photonic-crystal slabs is numerically computed and the associated light-line problem is discussed, which points to the issue of intrinsic out-of-lane diffraction losses for the photonic bands lying above the light line. The photonic states are then classified by the group theory formalism: each mode is related to an irreducible representation of the corresponding small point group. The optical properties are investigated by means of the scattering matrix method, which numerically implements a variable-angle-reflectance experiment; comparison with experiments is also provided. The analysis of surface reflectance proves the existence of selection rules for coupling an external wave to a certain photonic mode. Such rules can be directly derived from symmetry considerations. Lastly, the control of wave propagation in weak-index contrast photonic-crystal slabs is tackled in view of designing building blocks for photonic integrated circuits. The proposed designs are found to comply with the major requirements of low-loss propagation, high and single-mode transmission. These notions are then collected to model a photonic-crystal combiner for an integrated multi-wavelength-source laser.

  8. Numerical investigation of optical Tamm states in two-dimensional hybrid plasmonic-photonic crystal nanobeams

    Science.gov (United States)

    Meng, Zi-Ming; Hu, Yi-Hua; Ju, Gui-Fang; Zhong, Xiao-Lan; Ding, Wei; Li, Zhi-Yuan

    2014-07-01

    Optical Tamm states (OTSs) in analogy with its electronic counterpart confined at the surface of crystals are optical surface modes at the interfaces between uniform metallic films and distributed Bragg reflectors. In this paper, OTSs are numerically investigated in two-dimensional hybrid plasmonic-photonic crystal nanobeams (HPPCN), which are constructed by inserting a metallic nanoparticle into a photonic crystal nanobeam formed by periodically etching square air holes into dielectric waveguides. The evidences of OTSs can be verified by transmission spectra and the field distribution at resonant frequency. Similar to OTSs in one-dimensional multilayer structures OTSs in HPPCN can be excited by both TE and TM polarization. The physical origin of OTSs in HPPCN is due to the combined contribution of strong reflection imposed by the photonic band gap (PBG) of the photonic crystal (PC) nanobeam and strong backward scattering exerted by the nanoparticle. For TE, incidence OTSs can be obtained at the frequency near the center of the photonic band gap. The transmissivity and the resonant frequency can be finely tuned by the dimension of nanoparticles. While for TM incidence OTSs are observed for relatively larger metallic nanoparticles compared with TE polarization. The differences between TE and TM polarization can be explained by two reasons. For one reason stronger backward scattering of nanoparticles for TE polarization can be achieved by the excitation of localized surface plasmon polariton of nanoparticles. This assumption has been proved by examining the scattering, absorption, and extinction cross section of the metallic nanoparticle. The other can be attributed to the deep and wide PBG available for TE polarization with less number of air holes compared with TM polarization. Our results show great promise in extending the application scope of OTSs from one-dimensional structures to practical integrated photonic devices and circuits.

  9. Development of fast two-dimensional standing wave microscopy using acousto-optic deflectors

    Science.gov (United States)

    Gliko, Olga; Reddy, Duemani G.; Brownell, William E.; Saggau, Peter

    2008-02-01

    A novel scheme for two-dimensional (2D) standing wave fluorescence microscopy (SWFM) using acousto-optic deflectors (AODs) is proposed. Two laser beams were coupled into an inverted microscope and focused at the back focal plane of the objective lens. The position of each of two beams at the back focal plane was controlled by a pair of AODs. This resulted in two collimated beams that interfered in the focal plane, creating a lateral periodic excitation pattern with variable spacing and orientation. The phase of the standing wave pattern was controlled by phase delay between two RF sinusoidal signals driving the AODs. Nine SW patterns of three different orientations about the optical axis and three different phases were generated. The excitation of the specimen using these patterns will result in a SWFM image with enhanced 2D lateral resolution with a nearly isotropic effective point-spread function. Rotation of the SW pattern relative to specimen and varying the SW phase do not involve any mechanical movements and are only limited by the time required for the acoustic wave to fill the aperture of AOD. The resulting total acquisition time can be as short as 100 µs and is only further limited by speed and sensitivity of the employed CCD camera. Therefore, this 2D SWFM can provide a real time imaging of subresolution processes such as docking and fusion of synaptic vesicles. In addition, the combination of 2D SWFM with variable angle total internal reflection (TIR) can extend this scheme to fast microscopy with enhanced three-dimensional (3D) resolution.

  10. Numerical investigation of optical Tamm states in two-dimensional hybrid plasmonic-photonic crystal nanobeams

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Zi-Ming, E-mail: mengzm@gdut.edu.cn, E-mail: lizy@aphy.iphy.ac.cn; Hu, Yi-Hua; Ju, Gui-Fang [School of Physics and Optoelectronic Engineering, Guangdong University of Technology, Guangzhou 510006 (China); Zhong, Xiao-Lan; Ding, Wei; Li, Zhi-Yuan, E-mail: mengzm@gdut.edu.cn, E-mail: lizy@aphy.iphy.ac.cn [Laboratory of Optical Physics, Institute of Physics, Chinese Academy of Sciences, P.O. Box 603, Beijing 100190 (China)

    2014-07-28

    Optical Tamm states (OTSs) in analogy with its electronic counterpart confined at the surface of crystals are optical surface modes at the interfaces between uniform metallic films and distributed Bragg reflectors. In this paper, OTSs are numerically investigated in two-dimensional hybrid plasmonic-photonic crystal nanobeams (HPPCN), which are constructed by inserting a metallic nanoparticle into a photonic crystal nanobeam formed by periodically etching square air holes into dielectric waveguides. The evidences of OTSs can be verified by transmission spectra and the field distribution at resonant frequency. Similar to OTSs in one-dimensional multilayer structures OTSs in HPPCN can be excited by both TE and TM polarization. The physical origin of OTSs in HPPCN is due to the combined contribution of strong reflection imposed by the photonic band gap (PBG) of the photonic crystal (PC) nanobeam and strong backward scattering exerted by the nanoparticle. For TE, incidence OTSs can be obtained at the frequency near the center of the photonic band gap. The transmissivity and the resonant frequency can be finely tuned by the dimension of nanoparticles. While for TM incidence OTSs are observed for relatively larger metallic nanoparticles compared with TE polarization. The differences between TE and TM polarization can be explained by two reasons. For one reason stronger backward scattering of nanoparticles for TE polarization can be achieved by the excitation of localized surface plasmon polariton of nanoparticles. This assumption has been proved by examining the scattering, absorption, and extinction cross section of the metallic nanoparticle. The other can be attributed to the deep and wide PBG available for TE polarization with less number of air holes compared with TM polarization. Our results show great promise in extending the application scope of OTSs from one-dimensional structures to practical integrated photonic devices and circuits.

  11. Key Technologies for Optical Packet Switching

    Institute of Scientific and Technical Information of China (English)

    Akira; Okada

    2003-01-01

    The paper describes our recent progress on key technologies and components for realizing optical packet switching, including an out-of-band optical label switching technique, an optical packet synchronizer and a burst-mode optical receiver.

  12. Key Technologies for Optical Packet Switching

    Institute of Scientific and Technical Information of China (English)

    Akira Okada

    2003-01-01

    The paper describes our recent progress on key technologies and components for realizing optical packet switching,including an out-of-band optical label switching technique, an optical packet synchronizer and a burst-mode optical receiver.

  13. Two-dimensional ion chromatography using tandem ion-exchange columns with gradient-pulse column switching.

    Science.gov (United States)

    Johns, Cameron; Shellie, Robert A; Pohl, Christopher A; Haddad, Paul R

    2009-10-09

    A two-dimensional ion chromatography (2D-IC) approach has been developed which provides greater resolution of complex samples than is possible currently using a single column. Two columns containing different stationary phases are connected via a tee-piece, which enables an additional eluent flow and independent control of eluent concentration on each column. The resultant mixed eluent flow at the tee-piece can be varied to produce a different eluent concentration on the second column. This allows analytes strongly retained on the first column to be separated rapidly on the second column, whilst maintaining a highly efficient, well resolved separation of analytes retained weakly on the first column. A group of 18 inorganic anions has been separated to demonstrate the utility of this approach and the proposed 2D-IC method provided separation of this mixture with resolution of all analytes greater than 1.3. Careful optimisation of the eluent profiles on both columns resulted in run times of less than 28 min, including re-equilibration. Separations were performed using isocratic or gradient elution on the first column, with an isocratic separation being used on the second column. Switching of the analytes onto the second column was performed using a gradient pulse of concentrated eluent to quickly elute strongly retained analytes from the first column onto the second column. The separations were highly repeatable (RSD of 0.01-0.12% for retention times and 0.08-2.9% for peak areas) and efficient (typically 8000-260,000 plates). Detection limits were 3-80 ppb.

  14. Transparent EuTiO3 films: a possible two-dimensional magneto-optical device

    Science.gov (United States)

    Bussmann-Holder, Annette; Roleder, Krystian; Stuhlhofer, Benjamin; Logvenov, Gennady; Lazar, Iwona; Soszyński, Andrzej; Koperski, Janusz; Simon, Arndt; Köhler, Jürgen

    2017-01-01

    The magneto-optical activity of high quality transparent thin films of insulating EuTiO3 (ETO) deposited on a thin SrTiO3 (STO) substrate, both being non-magnetic materials, are demonstrated to be a versatile tool for light modulation. The operating temperature is close to room temperature and allows for multiple device engineering. By using small magnetic fields birefringence of the samples can be switched off and on. Similarly, rotation of the sample in the field can modify its birefringence Δn. In addition, Δn can be increased by a factor of 4 in very modest fields with simultaneously enhancing the operating temperature by almost 100 K.

  15. Low power all optical switches

    Institute of Scientific and Technical Information of China (English)

    Alireza Bananej; LI Chun-fei 李淳飞

    2004-01-01

    In this paper, we propose a new design of all fiber optical switches by using a high finesse ring resonator (RR) side coupled Mach-Zehnder interferometer. We will show that by compensating the total loss in the RR the switching power can be decreased greatly and by loss, compensating the bistability effect in RR can be cancelled and the switching performance can be improved. In addition, we will show that by using Erbium doped fiber for fabricating the RR we can obtain switching power threshold in mW range.

  16. Optical microcavities based on surface modes in two-dimensional photonic crystals and silicon-on-insulator photonic crystals

    DEFF Research Database (Denmark)

    Xiao, Sanshui; Qiu, M.

    2007-01-01

    Surface-mode optical microcavities based on two-dimensional photonic crystals and silicon-on-insulator photonic crystals are studied. We demonstrate that a high-quality-factor microcavity can be easily realized in these structures. With an increasing of the cavity length, the quality factor is gr...

  17. Analysis of alkyl phosphates in petroleum samples by comprehensive two-dimensional gas chromatography with nitrogen phosphorus detection and post-column Deans switching.

    Science.gov (United States)

    Nizio, Katie D; Harynuk, James J

    2012-08-24

    Alkyl phosphate based gellants used as viscosity builders for fracturing fluids used in the process of hydraulic fracturing have been implicated in numerous refinery-fouling incidents in North America. In response, industry developed an inductively coupled plasma optical emission spectroscopy (ICP-OES) based method for the analysis of total volatile phosphorus in distillate fractions of crude oil; however, this method is plagued by poor precision and a high limit of detection (0.5±1μg phosphorus mL(-1)). Furthermore this method cannot provide speciation information, which is critical for developing an understanding of the challenge of alkyl phosphates at a molecular level. An approach using comprehensive two-dimensional gas chromatography with nitrogen phosphorus detection (GC×GC-NPD) and post-column Deans switching is presented. This method provides qualitative and quantitative profiles of alkyl phosphates in industrial petroleum samples with increased precision and at levels comparable to or below those achievable by ICP-OES. A recovery study in a fracturing fluid sample and a profiling study of alkyl phosphates in four recovered fracturing fluid/crude oil mixtures (flowback) are also presented.

  18. The nonlinear optical response of a two-dimensional atomic crystal

    CERN Document Server

    Merano, Michele

    2015-01-01

    The theory of Bloembergen and Persham for the light waves at the boundary of nonlinear media is applied to a nonlinear two-dimensional atomic crystal placed in between linear bulk media. The crystal is treated as a zero-thickness interface, a real two-dimensional system. Harmonic waves emanate from it. Generalization of the laws of reflection and refraction give the direction and the intensity of the harmonic waves. The nonlinear polarization of these special materials is very sensitive to the substrate on which they are deposited. Experiments on second harmonic generation of a $\\rm MoS_{2}$ monolayer are discussed to elucidate this point.

  19. Digital communication of two-dimensional messages in a chaotic optical system

    Institute of Scientific and Technical Information of China (English)

    Zhou Yun; Wu Liang; Zhu Shi-Qun

    2005-01-01

    The digital communication of two-dimensional messages is investigated when two solid state multi-mode chaotic lasers are employed in a master-slave configuration. By introducing the time derivative of intensity difference between the receiver (carrier) and the transmittal (carrier plus signal), several signals can be encoded into a single pulse. If one signal contains several binary bits, two-dimensional messages in the form of a matrix can be encoded and transmitted on a single pulse. With these improvements in secure communications using chaotic multi-mode lasers, not only the transmission rate can be increased but also the privacy can be enhanced greatly.

  20. Optics and Optoelectronics of Two-dimensional Semiconducting Monolayers and Heterostructures

    Science.gov (United States)

    Ross, Jason Solomon

    Until recently, the physics of truly two-dimensional (2D) excitons could only be explored theoretically. Following the discovery of graphene, many 2D materials were quickly identified and isolated, one system being the semiconducting Group VI-B transition metal dichalcogenides (TMDs). These semiconductors are the first air-stable materials that are atomically thin (three atomics thick), and yet can be produced in arbitrarily large lateral sheets. They have a direct band gap in which confinement leads to large spatial overlap of electrons and holes resulting in strongly coupled excitonic transitions that dominate light-matter interactions. The direct band-gap of monolayer TMDs occurs at the corners of the hexagonal Brillouin zone, referred to as the K valleys. Entirely unique to these materials, excitons in adjacent K valleys selectively couple to light of opposite circular polarization, i.e. the K (K') valley is selective to right (left) circularly polarized photons. This property offers the possible realization of novel devices that will manipulate the valley index, known as valleytronics. Further, creating a stacked heterostructure (HS) of two TMD monolayers of different molecular species can exhibit type-II band alignment leading to the first atomically sharp built-in p-n junction and a bright interlayer exciton with long lifetimes. Being flat 2D sheets, it is easy to couple these materials to nearby systems such as microfabricated electrodes and photonic crystal cavities allowing for unique modulation and device schemes. Here, I employ both optical and electronic techniques to study the unique physics of 2D excitons in TMDs as well as demonstrate some of their first optoelectronic and valleytronic devices. The most notable achievement is perhaps the first demonstrations of both atomically thin and 2D heterostructure light emitting diodes and photovoltaic devices. Other breakthroughs include the first demonstration of exciton charging tunability in a 2D system

  1. Design of optical switches by illusion optics

    Science.gov (United States)

    Shoorian, H. R.; Abrishamian, M. S.

    2013-05-01

    In this paper, illusion optics theory is employed to form Bragg gratings in an optical waveguide in order to design an optical switch. By using an illusion device at a certain distance from the waveguide, the effective refractive index of the waveguide is remotely modulated, turning the waveguide into a distributed Bragg reflector (DBR) which blocks the waves at a stop band. By removing the illusion device, the waves propagate through the waveguide again. In addition, this method is used to remotely tune DBR optical properties such as resonant frequency and bandwidth in a wide range, which leads to a tunable filter for optical switching applications. Finally, using an illusion device at a distance, an optical cavity is created by inserting defects remotely in a DBR without any physical damage in the primary device.

  2. Optical generation of a spatially variant two-dimensional lattice structure by using a phase only spatial light modulator

    CERN Document Server

    Kumar, Manish

    2016-01-01

    We propose a simple and straightforward method to generate a spatially variant lattice structures by optical interference lithography method. Using this method, it is possible to independently vary the orientation and period of the two-dimensional lattice. The method consists of two steps which are: numerical synthesis of corresponding phase mask by employing a two-dimensional integrated gradient calculations and experimental implementation of synthesized phase mask by making use of a phase only spatial light modulator in an optical 4f Fourier filtering setup. As a working example, we provide the experimental fabrication of a spatially variant square lattice structure which has the possibility to guide a Gaussian beam through a 90{\\deg} bend by photonic crystal self-collimation phenomena. The method is digitally reconfigurable, is completely scalable and could be extended to other kind of lattices as well.

  3. Optical generation of a spatially variant two-dimensional lattice structure by using a phase only spatial light modulator

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Manish, E-mail: manishk@physics.iitd.ac.in; Joseph, Joby, E-mail: joby@physics.iitd.ac.in [Photonics Research Laboratory, Department of Physics, Indian Institute of Technology Delhi, New Delhi 110016 (India)

    2014-08-04

    We propose a simple and straightforward method to generate spatially variant lattice structures by optical interference lithography method. Using this method, it is possible to independently vary the orientation and period of the two-dimensional lattice. The method consists of two steps which are: numerical synthesis of corresponding phase mask by employing a two-dimensional integrated gradient calculations and experimental implementation of synthesized phase mask by making use of a phase only spatial light modulator in an optical 4f Fourier filtering setup. As a working example, we provide the experimental fabrication of a spatially variant square lattice structure which has the possibility to guide a Gaussian beam through a 90° bend by photonic crystal self-collimation phenomena. The method is digitally reconfigurable, is completely scalable, and could be extended to other kind of lattices as well.

  4. An efficient tool to calculate two-dimensional optical spectra for photoactive molecular complexes

    CERN Document Server

    Duan, Hong-Guang; Nalbach, Peter; Thorwart, Michael

    2015-01-01

    We combine the coherent modified Redfield theory (CMRT) with the equation of motion-phase matching approach (PMA) to calculate two-dimensional photon echo spectra for photoactive molecular complexes with an intermediate strength of the coupling to their environment. Both techniques are highly efficient, yet they involve approximations at different levels. By explicitly comparing with the numerically exact quasi-adiabatic path integral approach, we show for the Fenna-Matthews-Olson complex that the CMRT describes the decay rates in the population dynamics well, but final stationary populations and the oscillation frequencies differ slightly. In addition, we use the combined CMRT+PMA to calculate two-dimensional photon-echo spectra for a simple dimer model. We find excellent agreement with the exact path integral calculations at short waiting times where the dynamics is still coherent. For long waiting times, differences occur due to different final stationary states, specifically for strong system-bath couplin...

  5. Time-Domain Measurement of Optical True-Time Delay in Two-Dimensional Photonic Crystal Waveguides

    Institute of Scientific and Technical Information of China (English)

    ZHANG Geng-Yan; ZHOU Qiang; CUI Kai-Yu; ZHANG Wei; HUANG Yi-Dong

    2010-01-01

    @@ We report on the realization of optical true-time delay(TTD)by a two-dimensional photonic crystal waveguide(PCWG).Design and fabrication of the PCWG are investigated.The spectral dependence of the group delay is measured by detecting the phase shifts of a 10 GHz modulating signal,and a maximum delay of 25 ± 2.5 ps is obtained.

  6. Optical microcavities based on surface modes in two-dimensional photonic crystals and silicon-on-insulator photonic crystals

    DEFF Research Database (Denmark)

    Xiao, Sanshui; Qiu, M.

    2007-01-01

    Surface-mode optical microcavities based on two-dimensional photonic crystals and silicon-on-insulator photonic crystals are studied. We demonstrate that a high-quality-factor microcavity can be easily realized in these structures. With an increasing of the cavity length, the quality factor...... is gradually enhanced and the resonant frequency converges to that of the corresponding surface mode in the photonic crystals. These structures have potential applications such as sensing....

  7. Modeling of the optical properties of a two-dimensional system of small conductive particles.

    Science.gov (United States)

    Kondikov, A. A.; Tonkaev, P. A.; Chaldyshev, V. V.; Vartanyan, T. A.

    2016-08-01

    Software was developed for quick numerical calculations and graphic display of the absorption, reflection and transmittance spectra of two-dimensional systems of small conductive particles. It allowed us to make instant comparison of calculation results and experimental data. A lattice model was used to simulate nearly distributed particles, and the coherent-potential approximation was applied to obtain a solution to the problem of interacting particles. The Delphi programming environment was used.

  8. Cavity-enhanced optical Hall effect in two-dimensional free charge carrier gases detected at terahertz frequencies.

    Science.gov (United States)

    Knight, S; Schöche, S; Darakchieva, V; Kühne, P; Carlin, J-F; Grandjean, N; Herzinger, C M; Schubert, M; Hofmann, T

    2015-06-15

    The effect of a tunable, externally coupled Fabry-Perot cavity to resonantly enhance the optical Hall effect signatures at terahertz frequencies produced by a traditional Drude-like two-dimensional electron gas is shown and discussed in this Letter. As a result, the detection of optical Hall effect signatures at conveniently obtainable magnetic fields, for example, by neodymium permanent magnets, is demonstrated. An AlInN/GaN-based high-electron mobility transistor structure grown on a sapphire substrate is used for the experiment. The optical Hall effect signatures and their dispersions, which are governed by the frequency and the reflectance minima and maxima of the externally coupled Fabry-Perot cavity, are presented and discussed. Tuning the externally coupled Fabry-Perot cavity strongly modifies the optical Hall effect signatures, which provides a new degree of freedom for optical Hall effect experiments in addition to frequency, angle of incidence, and magnetic field direction and strength.

  9. A Demonstration of Automatically Switched Optical Network

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    We build an automatically switched optical network (ASON) testbed with four optical cross-connect nodes. Many fundamental ASON features are demonstrated, which is implemented by control protocols based on generalized multi-protocol label switching (GMPLS) framework.

  10. Role of the radiation-reaction force in the optical response of two-dimensional crystals

    CERN Document Server

    Merano, Michele

    2016-01-01

    A classical theory of a radiating two-dimensional crystal is proposed and an expression for the radiative-reaction force is derived. It is shown how this force, acting on the dipoles forming the material, induces a flow of energy away from the dipole vibrations into radiative electromagnetic energy. As conservation of energy requires, the time-average work per unit time and unit area done by the radiation-reaction force is negative and equal in absolute value to the time-average intensity radiated by the crystal.

  11. Circuit switched optical networks

    DEFF Research Database (Denmark)

    Kloch, Allan

    2003-01-01

    -connects can substitute the electrical nodes that today connect the installed optical fibres. This substitution will enable a massive increase in capacity since the bandwidth of the individual wavelength channels can be increased drastically when the electronic bit processing can be omitted. Furthermore...

  12. Mapping the optical properties of slab-type two-dimensional photonic crystal waveguides

    CERN Document Server

    Dulkeith, E; Vlasov, Y A; Dulkeith, Eric; Nab, Sharee J. Mc; Vlasov, Yurii A.

    2005-01-01

    We report on systematic experimental mapping of the transmission properties of two-dimensional silicon-on-insulator photonic crystal waveguides for a broad range of hole radii, slab thicknesses and waveguide lengths for both TE and TM polarizations. Detailed analysis of numerous spectral features allows a direct comparison of experimental data with 3D plane wave and finite-difference time-domain calculations. We find, counter-intuitively, that the bandwidth for low-loss propagation completely vanishes for structural parameters where the photonic band gap is maximized. Our results demonstrate that, in order to maximize the bandwidth of low-loss waveguiding, the hole radius must be significantly reduced. While the photonic band gap considerably narrows, the bandwidth of low-loss propagation in PhC waveguides is increased up to 125nm with losses as low as 8$\\pm$2dB/cm.

  13. One- and Two-Dimensional Arrays of Double-Well Optical Traps for Cold Atoms or Molecules

    Institute of Scientific and Technical Information of China (English)

    JI Xian-Ming; YIN Jian-Ping

    2004-01-01

    @@ We propose a novel scheme to form one- and two-dimensional arrays of double-well optical dipole traps for cold atoms (or molecules) by using an optical system composed of a binary π-phase grating and a lens illuminated by a plane light wave, and study the relationship between the maximum intensity Imax of each optical well (or the maximum trapping potential Umax for 85Rb atoms) and the relative apertureβ (= a/f) of the lens. We also calculate the intensity gradients of each optical well and their curvatures, and estimate the spontaneous photon-scattering rate of trapped atom in each well, including Rayleigh and Raman scattering rates. Our study shows that the proposed 1D and 2D arrays of double-well traps can be used to prepare 1D and 2D novel optical lattices with cold atoms (or molecules), or form an all-optically integrated atom optical chip, or even to realize an array of all-optical double-well atomic (or molecular) Bose-Einstein condensates by optical-potential evaporative cooling, and so on.

  14. Ultrafast photonic crystal optical switching

    Institute of Scientific and Technical Information of China (English)

    GONG Qi-huang; HU Xiao-yong

    2006-01-01

    Photonic crystal,a novel and artificial photonic material with periodic dielectric distribution,possesses photonic bandgap and can control the propagation states of photons.Photonic crystal has been considered to be a promising candidate for the future integrated photonic devices.The properties and the fabrication method of photonic crystal are expounded.The progresses of the study of ultrafast photonic crystal optical switching are discussed in detail.

  15. Simultaneous two-color, two-dimensional angular optical scattering patterns from airborne particulates: Scattering results and exploratory analysis

    Science.gov (United States)

    Holler, Stephen; Fuerstenau, Stephen D.; Skelsey, Charles R.

    2016-07-01

    Light scattering from non-spherical particles and aggregates exhibits complex structure that is revealed only when observed in two angular dimensions (θ, ϕ). However, due to variations in shape, packing, and orientation of such aerosols, the structure of two-dimensional angular optical scattering (TAOS) patterns varies among particles. The spectral dependence of scattering contributes further to the observed complexity, but offers another facet to consider. By leveraging multispectral TAOS data from flowing aerosols, we have identified novel morphological descriptors that may be employed in multivariate statistical algorithms for "unknown" particle classification.

  16. A new family of two-dimensional triple-codeweight asymmetric optical orthogonal code for OCDMA networks

    Institute of Scientific and Technical Information of China (English)

    Hongxi Yin; Wei Liang; Le Ma; Liqiao Qin

    2009-01-01

    A new generation algorithm of two-dimensional triple-codeweight asymmetric optical orthogonal codes for optical code division multiple access (OCDMA) networks is proposed. The code cardinality is obtained and the error-probability performance for corresponding OCDMA system is analyzed. The codes with two constraints (i.e., auto- and cross-correlation properties) being unequal are taken into account. On the premise of fixed system resources, the code cardinality can be significantly improved. By analysis of the error-probability performance, it is shown that the codes with different parameters have different performances. Therefore, this type of codes can be applied to support diverse quality of service (QoS) and satisfy the quality requirement of different multimedia or distinct users, and simultaneously make the better use of bandwidth resources in optical networks.

  17. New Frontiers in Optical Science: Terahertz Spectroscopy ot Two Dimensional Systems

    Science.gov (United States)

    Lee, Yun-Shik

    2011-10-01

    Terahertz (THz) radiation is electromagnetic radiation whose frequency lies between the microwave and infrared regions of the spectrum. Naturally occurring THz radiation fills up the space of everyday life providing warmth, yet this part of the spectrum remains the least explored region mainly due to the technical difficulties. The technological gap, however, has been rapidly diminishing for the last two decades. The new and exciting frontier of the THz science and technology has encroached on many different disciplines producing a broad range of applications such as medical imaging, sensing of biochemical agents, and ultra-high speed communication. Furthermore, the unique and advanced techniques of the THz spectroscopy have been proved to be a powerful tool to investigate the material properties inaccessible until recently. For example, THz waves strongly interact with electrons and holes in two dimensional systems, in which their dynamics are governed mainly by many-body Coulomb interactions. I will present our experimental studies demonstrating remarkable quantum effects in semiconductor nanostructures and exotic charge carrier dynamics in graphene.

  18. Tunable two dimensional optical beam steering with reconfigurable indium tin oxide plasmonic reflectarray metasurface

    Science.gov (United States)

    Forouzmand, A.; Mosallaei, H.

    2016-12-01

    In this paper, an electrically tunable reflectarray metasurface for two dimensional (2D) beam steering is designed by integration of a thin layer of indium tin oxide (ITO) material into a metal-insulator-metal (MIM) plasmonic unit-cell. The reflectarray is composed of square-shaped patch nanoantennas placed on a stack of insulator-ITO-metallic ground plane. The resonant characteristic of unit-cell and the accumulation of carrier density at the interface of ITO-insulator play key roles in obtaining over 250° of phase agility at around 218 terahertz (THz), by electrically varying the bias voltage. An array of unit-cells with integrated ITO and 2D voltage biasing distribution (from the side) offer the possibility of designing a reconfigurable antenna in which the main beam can be steered to relatively large angles in both θ- and φ- planes at carefully selected operating frequency. The significant advantage of this design is the dynamically adjustable radiation pattern in both azimuth and elevation planes even after fabrication.

  19. Nano-scale optical actuation based on two-dimensional heterostructure photonic crystal cavities

    Science.gov (United States)

    Lin, Tong; Zhou, Guangya; Chau, Fook Siong; Tian, Feng; Deng, Jie

    2015-03-01

    Nowadays, nano-electro-mechanical systems (NEMS) actuators using electrostatic forces are facing the bottleneck of the electromagnetic interference which greatly degrades their performances. On the contrary, the hybrid circuits driven by optical gradient forces which are immune to the electromagnetic interference show prominent advantages in communication, quantum computation, and other application systems. In this paper we propose an optical actuator utilizing the optical gradient force generated by a hetero-structure photonic crystal cavity. This type of cavity has a longitudinal air-slot and characteristics of ultrahigh quality factor (Q) and ultra-small mode volume (V) which is capable of producing a much larger force compared with the waveguide-based structures. Due to the symmetry property, attractive optical gradient force is generated. Additionally, the optomechanical coefficient (gom) of this cavity is two orders of magnitude larger than that of the coupled nanobeam photonic crystal cavities. The 2D hetero-structure cavity, comb drives, folded beam suspensions and the displacement sensor compose the whole device. The cavity serves as the optical actuator whilst the butt-coupled waveguide acts as the displacement sensor which is theoretically proved to be insensitive to the temperature variations. As known, the thermo-optic effect prevails especially in the cavity-based structures. The butt-coupled waveguide can be used to decouple the thermal effect and the optoemchanical effect (OM) with the aid of comb drives. The results demonstrate that the proposed optical gradient force actuator show great potential in the future of all-optical reconfigurable circuits.

  20. Photoinduced switching to metallic states in the two-dimensional organic Mott insulator dimethylphenazine-tetrafluorotetracyanoquinodimethane with anisotropic molecular stacks

    Science.gov (United States)

    Matsuzaki, Hiroyuki; Ohkura, Masa-aki; Ishige, Yu; Nogami, Yoshio; Okamoto, Hiroshi

    2015-06-01

    A photoinduced phase transition was investigated in an organic charge-transfer (CT) complex M2P -TCNQ F4 , [M2P : 5,10-dihydro-5,10-dimethylphenazine, donor (D) molecule; TCNQ F4 : 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, acceptor (A) molecule] by means of femtosecond pump-probe reflection spectroscopy. This is an ionic compound and has a peculiar two-dimensional (2D) molecular arrangement; the same A (or D) molecules arrange along the [100] direction, and A and D molecules alternately arrange along the [111] direction. It results in a strongly anisotropic two-dimensional electronic structure. This compound shows a structural and magnetic phase transition at 122 K below which the two neighboring molecules are dimerized along both the [100] and [111] directions. We demonstrate that two kinds of photoinduced phase transitions occur by irradiation of a femtosecond laser pulse; in the high-temperature lattice-uniform phase, a quasi-one-dimensional (1D) metallic state along the AA(DD) stack is generated, and in the low-temperature lattice-dimerized phase, a quasi-2D metallic state is initially produced and molecular dimerizations are subsequently released. Mixed-stack CT compounds consisting of DA stacks are generally insulators or semiconductors in the ground state. Here, such a dynamical metallization in the DA stack is demonstrated. The release of the dimerizations drives several kinds of coherent oscillations which play an important role in the stabilization of the lattice-dimerized phase. The mechanisms of those photoinduced phase transitions are discussed in terms of the magnitudes of the anisotropic bandwidths and molecular dimerizations along two different directions of the molecular stacks.

  1. Optical theorem for two-dimensional (2D) scalar monochromatic acoustical beams in cylindrical coordinates.

    Science.gov (United States)

    Mitri, F G

    2015-09-01

    The optical theorem for plane waves is recognized as one of the fundamental theorems in optical, acoustical and quantum wave scattering theory as it relates the extinction cross-section to the forward scattering complex amplitude function. Here, the optical theorem is extended and generalized in a cylindrical coordinates system for the case of 2D beams of arbitrary character as opposed to plane waves of infinite extent. The case of scalar monochromatic acoustical wavefronts is considered, and generalized analytical expressions for the extinction, absorption and scattering cross-sections are derived and extended in the framework of the scalar resonance scattering theory. The analysis reveals the presence of an interference scattering cross-section term describing the interaction between the diffracted Franz waves with the resonance elastic waves. The extended optical theorem in cylindrical coordinates is applicable to any object of arbitrary geometry in 2D located arbitrarily in the beam's path. Related investigations in optics, acoustics and quantum mechanics will benefit from this analysis in the context of wave scattering theory and other phenomena closely connected to it, such as the multiple scattering by a cloud of particles, as well as the resulting radiation force and torque.

  2. Two-dimensional refractive index and stresses profiles of a homogenous bent optical fiber.

    Science.gov (United States)

    Ramadan, W A; Wahba, H H; Shams El-Din, M A

    2014-11-01

    We present a significant contribution to the theory of determining the refractive index profile of a bent homogenous optical fiber. In this theory we consider two different processes controlling the index profile variations. The first is the linear index variation due to stress along the bent radius, and the second is the release of this stress on the fiber surface. This release process is considered to have radial dependence on the fiber radius. These considerations enable us to construct the index profile in two dimensions normal to the optical axis, considering the refraction of light rays traversing the fiber. This theory is applied to optical homogenous bent fiber with two bending radii when they are located orthogonal to the light path of the object arm in the holographic setup (like the Mach-Zehnder interferometer). Digital holographic phase shifting interferometry is employed in this study. The recorded phase shifted holograms have been combined, reconstructed, and processed to extract the phase map of the bent optical fiber. A comparison between the extracted optical phase differences and the calculated one indicates that the refractive index profile variation should include the above mentioned two processes, which are considered as a response for stress distribution across the fiber's cross section. The experimentally obtained refractive index profiles provide the stress induced birefringence profile. Thus we are able to present a realistic induced stress profile due to bending.

  3. A two dimensional optical input to one dimensional serial pulse transformation using confocal reflectors.

    Science.gov (United States)

    Hulse, George

    2014-01-01

    An optical approach using confocal parabolic reflectors is used to transform 2D input data based on spatial position to a 1D sequenced serial string. The optical input data are set up as a 2D array. Individual channels are established between the input array and the final output detector, which reads the data as a time based serial data. The transformation is achieved by changing the optical path length associated with each pixel and its channel to the output detector. The 2D data can be images or individual sources but the light must be parallel. This paper defines how to establish the channels and the calculations required to achieve the desired transformation.

  4. Influence of out-of-plane response on optical properties of two-dimensional materials: First principles approach

    Science.gov (United States)

    Matthes, Lars; Pulci, Olivia; Bechstedt, Friedhelm

    2016-11-01

    The ab initio calculation of optical spectra of sheet crystals usually arranges them in a three-dimensional superlattice with a sufficiently large interlayer distance. We show how the resulting frequency-dependent dielectric tensor is related to the anisotropic optical conductivity of an individual sheet or to the dielectric tensor of a corresponding film with thickness d . Their out-of-plane component is taken into account, in contrast to usual treatments. We demonstrate that the generalized transfer-matrix method to model the optical properties of a layer system containing a sheet crystal accounts for all tensor components. As long as d ≪λ (λ -wavelength of light) this generalized formulation of the optical properties for anisotropic two-dimensional (2D) systems of arbitrary thickness reproduces the limits found in literature that are based either on electromagnetic boundary conditions for a conducting surface or on an isotropic dielectric tensor. For s -polarized light, the results are independent of the sheet description. For oblique incidence of p -polarized light, the tensor nature of the optical conductivity (or the dielectric function) of the sheet crystal strongly impacts on reflectance, transmittance, and absorbance due to the out-of-plane optical conductivity. The limit d →0 should be taken in the final expressions. Example spectra are given for the group-IV honeycomb 2D crystals graphene and silicene.

  5. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure.

    Science.gov (United States)

    Rybin, Mikhail V; Samusev, Kirill B; Lukashenko, Stanislav Yu; Kivshar, Yuri S; Limonov, Mikhail F

    2016-08-05

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  6. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure

    Science.gov (United States)

    Rybin, Mikhail V.; Samusev, Kirill B.; Lukashenko, Stanislav Yu.; Kivshar, Yuri S.; Limonov, Mikhail F.

    2016-08-01

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  7. Two-dimensional optical coherence vibration tomography for low-frequency vibration measurement and response-only modal analysis

    Science.gov (United States)

    Zhong, Jianfeng; Zhong, Shuncong; Zhang, Qiukun

    2016-10-01

    A high-speed camera-based two-dimensional optical coherence vibration tomography (2DOCVT) system with a subnanometre displacement resolution was developed and employed for low-frequency vibration measurement and modal analysis. Experimental results demonstrated the ability of low-frequency absolute displacement measurement of structural line vibrations without scanning. Three-dimensional (3D) surface displacement of a vibrating structure could also be obtained using the developed 2DOCVT by scanning the structure. The scanning 2DOCVT system acted like a 3D optical coherence vibration tomography system. The developed 2DOCVT system could capture structural modal parameters without vibration excitation input information, and therefore, it is a response-only method. The 2DOCVT could be recommended in the application of low-frequency vibration measurement and modal analysis of beam and plate structures, especially when the vibration amplitude is at nanometre or micrometre scale.

  8. Fast transport, atom sample splitting, and single-atom qubit supply in two-dimensional arrays of optical microtraps

    CERN Document Server

    Schlosser, Malte; Gierl, Christian; Teichmann, Stephan; Tichelmann, Sascha; Birkl, Gerhard; 10.1088/1367-2630/14/12/123034

    2013-01-01

    Two-dimensional arrays of optical micro-traps created by microoptical elements present a versatile and scalable architecture for neutral atom quantum information processing, quantum simulation, and the manipulation of ultra-cold quantum gases. In this article, we demonstrate advanced capabilities of this approach by introducing novel techniques and functionalities as well as the combined operation of previously separately implemented functions. We introduce piezo-actuator based transport of atom ensembles over distances of more than one trap separation, examine the capabilities of rapid atom transport provided by acousto-optical beam steering, and analyze the adiabaticity limit for atom transport in these configurations. We implement a spatial light modulator with 8-bit transmission control for the per-site adjustment of the trap depth and the number of atoms loaded. We combine single-site addressing, trap depth control, and atom transport in one configuration for demonstrating the splitting of atom ensembles...

  9. The two-dimensional optical pattern of a five inch diagonal white organic light emitting diode by rapid rotating measurement

    Science.gov (United States)

    Yang, Henglong; Cheng, Yu-Hen; Chen, Ming-Hong; Lin, Yu-Hsuan

    2016-09-01

    The feasibility of applying a five-inch diagonal white organic light-emitting diode (WOLED) as a desk lamp was experimentally investigated by quantitatively comparing its two-dimensional (2D) optical intensity profile to that of a traditional 3M desk lamp equipped with optical diffuser. The 2D optical distribution patterns as the function of vertical distances to a surface of a five-inch diagonal WOLED were obtained by using rapid rotating measurement technique consisted of a sample holder on a rotational stage and a fixed photo detector with optical power meter. The 2D optical intensity profile on a surface can be rapidly established in a relatively small space by recording the reading from the fixed photo detector as rotating the sample holder. This rapid measurement technique is suitable for practical application in quality engineering without larger space. A WOLED is a compact and thin lighting source with planar device structure without additional optical components. Its optical intensity profile on a plane is expected to be different from traditional lighting sources. The optical distribution pattern of a desk lamp requires a relatively large area on a surface with relatively uniformed intensity distribution. The quantitative analysis of the similarity between WOLED and 3M desk lamp was conducted by comparing the optimal zones defined as the area within 75% of the maximum intensity in 2D optical distribution pattern. Our preliminary result showed that the optimal zone of a five-inch diagonal WOLED at 45cm vertical distance is highly similar to that of the 3M desk lamp with optical diffuser.

  10. Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation

    Science.gov (United States)

    1994-02-28

    Organosilicon Polymeric Nonlinear Optical Materials for Optical C: F49620-93-C-0039 Switching and Modulation 6. AUTHOR(S) Mr. Sandip K. Sengupta, Dr...D FINAL REPORT for Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation Prepared for: USAF, AFMC (AFOSR) Air Force...34Organosilicon Polymeric Nonlinear Optical Materials for Optical Switching and Modulation," contract number F49620-93-C-0039. The work has been performed by Dr

  11. Complete Two-dimensional Muellermetric Imaging of Biological Tissue Using Heterodyned Optical Coherence Tomography

    CERN Document Server

    Liu, Xue; Shahriar, M S

    2010-01-01

    A polarization-sensitive optical coherence tomography system based on heterodyning and filtering techniques is built to perform Stokesmetric imaging of different layers of depths in a porcine tendon sample. The complete 4\\times4 backscattering Muellermetric images of one layer are acquired using such a system. The images reveal information indiscernible from a conventional OCT system.

  12. Two-dimensional Few-circle Optical Pulses in the Inhomogeneous Environment of Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    M.B. Belonenko

    2015-12-01

    Full Text Available We consider the task about few-circle optical pulses dynamics (light bullets in the inhomogeneous environment of carbon nanotubes. Electromagnetic field of pulse describes classically, on basis of Maxwell equation, and carbon nanotubes give dispersion law for electrons, which interacting with pulse. We show that light bullets propagate stably.

  13. Two-dimensional optical correlation spectroscopy applied to liquid/glass dynamics

    NARCIS (Netherlands)

    Lazonder, Kees; Pshenichnikov, Maxim S.; Wiersma, Douwe A.; Corkum, Paul; Jonas, David M.; Miller, R.J. Dwayne.; Weiner, Andrew M.

    2007-01-01

    Correlation spectroscopy was used to study the effects of temperature and phase changes on liquid and glass solvent dynamics. By assessing the eccentricity of the elliptic shape of a 2D optical correlation spectrum the value of the underlying frequency-frequency correlation function can be retrieved

  14. Two-dimensional optical correlation spectroscopy applied to liquid/glass dynamics

    NARCIS (Netherlands)

    Lazonder, Kees; Pshenichnikov, Maxim S.; Wiersma, Douwe A.

    2006-01-01

    Correlation spectroscopy was used to study the effects of temperature and phase changes on liquid and glass solvent dynamics. This method yielded both intuitive clues and a quantitative measure of the dynamics of the system. © 2006 Optical Society of America.

  15. Two-Dimensional Stochastic Projections for Tight Integration of Optical and Inertial Sensors for Navigation

    Science.gov (United States)

    2007-01-01

    first-order Gauss - Markov process [11], based on the specification for the in- ertial measurement unit (IMU). The landmarks are mod- eled as stationary...Kalman Filtering. John Wi- ley and Sons, Inc., New York, NY, 1992. [3] J. W. Goodman. Introduction to Fourier Optics. Mc- Graw Hill, Boston, Massachusetts

  16. New two-dimensional boron nitride allotropes with attractive electronic and optical properties

    Science.gov (United States)

    Shahrokhi, Masoud; Mortazavi, Bohayra; Berdiyorov, Golibjon R.

    2017-03-01

    Using first principles calculations, structural, electronic and optical properties of five new 2D boron nitride (BN) allotropes have been studied. The results exhibit that the cohesive energy for all these five new allotrope is positive such as all these systems are stable; therefore, it is possible to synthesize these structures in experiments. It is found that the band gap of all new 2D BN allotropes is smaller than the h-BN sheet. In our calculations the dielectric tensor is derived within the random phase approximation (RPA). Specifically, the dielectric function, refraction index and the loss function, of the 2D BN allotropes are calculated for both parallel and perpendicular electric field polarizations. The results show that the optical spectra are anisotropic along these two polarizations. The results obtained from our calculations are beneficial to practical applications of these 2D BN allotropes in optoelectronics and electronics.

  17. Quantum limit for two-dimensional resolution of two incoherent optical point sources

    CERN Document Server

    Ang, Shan Zheng; Tsang, Mankei

    2016-01-01

    We obtain the multiple-parameter quantum Cram\\'er-Rao bound for estimating the Cartesian components of the centroid and separation of two incoherent optical point sources using an imaging system with finite spatial bandwidth. Under quite general and realistic assumptions on the point-spread function of the imaging system, and for weak source strengths, we show that the Cram\\'er-Rao bounds for the x and y components of the separation are independent of the values of those components, which may be well-below the conventional Rayleigh resolution limit. We also propose two linear optics-based measurement methods that approach the quantum bound for the estimation of the Cartesian components of the separation once the centroid has been located. One of the methods is an interferometric scheme that approaches the quantum bound for sub-Rayleigh separations. The other method uses fiber coupling to attain the bound regardless of the distance between the two sources.

  18. Ultrabroadband Two-Dimensional Coherent Optical Spectrometer for Directed Energy Trapping in Quantum Dynamical Systems

    Science.gov (United States)

    2015-12-04

    technique combining super-continuum generation with multi-dimensional coherent optical spectroscopy, which can realize simultaneous high spectral and...onto a single-element detector. Each mask yields one intensity value on the detector, and by measuring the intensities for a sequence of different...in the 2DFT spectrum. 9 Figure 8. Comparison of 2DFT spectra. Absolute- value 2DFT spectra of (a) IR-144 cyanine dye ( ) and (b) LH2

  19. Two-dimensional cell tracking by FPGA-optical correlation method

    Science.gov (United States)

    Solís, Iraís; Torres-Cisneros, M.; Aviña-Cervantes, J. G.; Ibarra-Manzano, O. G.; Debeir, O.; Ledesma-Orozco, S.; Pérez-Careta, E.; Sanchez-Mondragón, J. J.

    2009-06-01

    Our work uses 1080 images sequence obtained from "in vitro" samples taken every 4 min from a microscope under phase contrast technique. These images are in JPEG format and are 500×700 pixels size with a compression rate of 3:1. We developed an algorithm and characterize it over several image operations against the tracking effectiveness and its robustness respect mitosis and cell shape change. Image equalization, dilation and erosion were the image processing procedures founded to provide best tracking results. Equalization procedure, for example, required a time delay of 5 sec for a size target of 60×90 pixels and 9 sec for size target of 89×100 pixels. This algorithm was implemented into a FPGA which controlled our optical correlator in order to performance all Fourier operations by optical method. Our results showed that the use of the optical correlator can reduce the time consuming in the image process until for 90% which able us to track cells in vascular structure.

  20. Optical characterization of two-dimensional array of 2,048 tilting micromirrors for astronomical spectroscopy.

    Science.gov (United States)

    Canonica, Michael D; Zamkotsian, Frédéric; Lanzoni, Patrick; Noell, Wilfried; De Rooij, Nico

    2013-09-23

    A micromirror array composed of 2048 silicon micromirrors measuring 200 × 100 μm² and tilting by 25° was developed as a reconfigurable slit mask for multi-object spectroscopy (MOS) in astronomy. The fill factor, contrast, and mirror deformation at both room and cryogenic temperatures were investigated. Contrast was measured using an optical setup that mimics a MOS instrument, and mirror deformation was characterized using a Twyman-Green interferometer. The results indicate that the array exhibited a fill factor of 82%, a contrast ratio of 1000:1, and surface mirror deformations of 8 nm and 27 nm for mirrors tilted at 298 K and 162 K, respectively.

  1. Recent Advancement on the Optical Properties of Two-Dimensional Molybdenum Disulfide (MoS2 Thin Films

    Directory of Open Access Journals (Sweden)

    Mingxiao Ye

    2015-03-01

    Full Text Available The emergence of two-dimensional (2D materials has led to tremendous interest in the study of graphene and a series of mono- and few-layered transition metal dichalcogenides (TMDCs. Among these TMDCs, the study of molybdenum disulfide (MoS2 has gained increasing attention due to its promising optical, electronic, and optoelectronic properties. Of particular interest is the indirect to direct band-gap transition from bulk and few-layered structures to mono-layered MoS2, respectively. In this review, the study of these properties is summarized. The use of Raman and Photoluminescence (PL spectroscopy of MoS2 has become a reliable technique for differentiating the number of molecular layers in 2D MoS2.

  2. Localization of a two-component Bose–Einstein condensate in a two-dimensional bichromatic optical lattice

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Kui-Tian, E-mail: kuitianxi@gmail.com; Li, Jinbin, E-mail: jinbin@nuaa.edu.cn; Shi, Da-Ning, E-mail: shi@nuaa.edu.cn

    2014-03-01

    We consider a weakly interacting two-component Bose–Einstein condensate (BEC) in a two-dimensional (2D) quasi-periodic bichromatic optical lattice (BOL). The problem is studied by means of split-step Crank–Nicolson method. The effects of weak intra- and inter-component interactions on localization of a two-component BEC are investigated. It is shown that in the quasi-2D regime, due to the enhanced disorder, there is no symmetry breaking like that in the one-dimensional (1D) case under a sine-typed potential, while configurations of density profiles are also quite different from that in the 1D case. By modulating interactions, the interplay of disorder and weak repulsive or attractive interactions is studied in detail. The cases with sine- and cosine-typed potentials acting on components 1 and 2 respectively are also discussed.

  3. Influence of disorder and deformation on the optical properties of a two-dimensional photonic crystal waveguide

    Institute of Scientific and Technical Information of China (English)

    Sun Wen-Qian; Liu Yu-Min; Wang Dong-Lin; Han Li-Hong; Guo Xuan; Yu Zhong-Yuan

    2013-01-01

    We investigate the effect of disorder and mechanical deformation on a two-dimensional photonic crystal waveguide.The dispersion characteristics and transmittance of the waveguide are studied using the finite element method.Results show that the geometric change of the dielectric material perpendicular to the light propagation direction has a larger influence on the waveguide characteristics than that parallel to the light propagation direction.Mechanical deformation has an obvious influence on the performance of the waveguide.In particular,longitudinal deformed structure exhibits distinct optical characteristics from the ideal one.Studies on this work will provide useful guideline to the fabrication and practical applications based on photonic crystal waveguides.

  4. Laser driven intraband optical transitions in two-dimensional quantum dots and quantum rings

    Science.gov (United States)

    Barseghyan, M. G.; Kirakosyan, A. A.; Laroze, D.

    2017-01-01

    The intraband optical absorption have been investigated in the presence of hydrogenic donor impurity in GaAs/GaAlAs quantum dot and quantum ring in the intense laser field. The single electron energy spectrum and wave functions have been found using the effective mass approximation and exact diagonalization technique. Different selection rules are obtained for intraband transitions depending on the direction of incident light polarization. Due to the accidental degeneracy of the laser dressed impurity states the crossings of the curves of the threshold energies and the dipole matrix elements on laser field parameter have been observed. The intraband absorption coefficient is calculated for different locations of hydrogenic donor impurity and different values of intense laser field parameter. The obtained results show that the absorption spectrum can exhibit either a blue- or redshift depending on the impurity location, values of the laser field parameter and direction of incident light polarization. The obtained theoretical results indicate a novel opportunity to tune the performance of new devices, based on the quantum dots and quantum rings and to control their specific properties by means of intense laser and hydrogenic donor impurity.

  5. Compressive sensing based high-speed time-stretch optical microscopy for two-dimensional image acquisition.

    Science.gov (United States)

    Guo, Qiang; Chen, Hongwei; Weng, Zhiliang; Chen, Minghua; Yang, Sigang; Xie, Shizhong

    2015-11-16

    In this paper, compressive sensing based high-speed time-stretch optical microscopy for two-dimensional (2D) image acquisition is proposed and experimentally demonstrated for the first time. A section of dispersion compensating fiber (DCF) is used to perform wavelength-to-time conversion and then ultrafast spectral shaping of broadband optical pulses can be achieved via high-speed intensity modulation. A 2D spatial disperser comprising a pair of orthogonally oriented dispersers is employed to produce spatially structured illumination for 2D image acquisition and a section of single mode fiber (SMF) is utilized for pulse compression in the optical domain. In our scheme, a 1.2-GHz photodetector and a 50-MHz analog-to-digital converter (ADC) are used to acquire the energy of the compressed pulses. Image reconstructions are demonstrated at a frame rate of 500 kHz and a sixteen-fold image compression is achieved in our proof-of-concept demonstration.

  6. Multi-channel laser Doppler velocimetry using a two-dimensional optical fiber array for obtaining instantaneous velocity distribution characteristics

    Science.gov (United States)

    Kyoden, Tomoaki; Yasue, Youichi; Ishida, Hiroki; Akiguchi, Shunsuke; Andoh, Tsugunobu; Takada, Yogo; Teranishi, Tsunenobu; Hachiga, Tadashi

    2015-01-01

    A laser Doppler velocimeter (LDV) has been developed that is capable of performing two-dimensional (2D) cross-sectional measurements. It employs two horizontal laser light sheets that intersect at an angle of 13.3°. Since the intersection region is thin, it can be used to approximately determine the 2D flow field. An 8 × 8 array of optical fibers is used to simultaneously measure Doppler frequencies at 64 points. Experiments were conducted to assess the performance of the LDV, and it was found to be capable of obtaining spatial and temporal velocity information at multiple points in a flow field. The technique is fast, noninvasive, and accurate over long sampling periods. Furthermore, its applicability to an actual flow field was confirmed by measuring the temporal velocity distribution of a pulsatile flow in a rectangular flow channel with an obstruction. The proposed device is thus a useful, compact optical instrument for conducting simultaneous 2D cross-sectional multipoint measurements.

  7. Integral field optical spectroscopy of a representative sample of ULIRGs: II. Two-dimensional kpc-scale extinction structure

    CERN Document Server

    García-Marín, M; Arribas, S

    2009-01-01

    We investigate the two-dimensional kpc-scale structure of the extinction in a representative sample of local ULIRGs using the Halpha/Hbeta line ratio.We use optical integral field spectroscopy obtained with the INTEGRAL instrument at the William Herschel Telescope. Complementary optical and near-IR high angular resolution HST images have also been used. The extinction exhibits a very complex and patchy structure in ULIRGs on kpc scales, from basically transparent regions to others deeply embedded in dust (Av~0.0 to Av~8.0 mag). Nuclear extinction covers a broad range in Av from 0.6 to 6 mag, 69% of the nuclei having Av>2.0 mag. Extinction in the external regions is substantially lower than in the nuclei with 64% of the ULIRGs in the sample having median Av of less than 2 mag for the entire galaxy. While post-coalescence nuclei tend to cluster around Av values of 2 to 3 mag, pre-coalescence nuclei appear more homogeneously distributed over the entire 0.4 mag

  8. Exciton delocalization and transport in photosystem I of cyanobacteria Synechococcus elongates: simulation study of coherent two-dimensional optical signals.

    Science.gov (United States)

    Abramavicius, Darius; Mukamel, Shaul

    2009-04-30

    Electronic excitations and the optical properties of the photosynthetic complex PSI are analyzed using an effective exciton model developed by Vaitekonis et al. [Photosynth. Res. 2005, 86, 185]. States of the reaction center, the linker states, the highly delocalized antenna states and the red states are identified and assigned in absorption and circular dichroism spectra by taking into account the spectral distribution of density of exciton states, exciton delocalization length, and participation ratio in the reaction center. Signatures of exciton cooperative dynamics in nonchiral and chirality-induced two-dimensional (2D) photon-echo signals are identified. Nonchiral signals show resonances associated with the red, the reaction center, and the bulk antenna states as well as transport between them. Spectrally overlapping contributions of the linker and the delocalized antenna states are clearly resolved in the chirality-induced signals. Strong correlations are observed between the delocalized antenna states, the linker states, and the RC states. The active space of the complex covering the RC, the linker, and the delocalized antenna states is common to PSI complexes in bacteria and plants.

  9. Crystallization studies on phase-change optical recording media by use of a two-dimensional periodic mark array.

    Science.gov (United States)

    Xun, X; Erwin, J K; Bletscher, W; Choi, J; Kallenbach, S; Mansuripur, M

    2001-12-10

    We present the results of crystallization studies in thin-film samples of amorphous and crystalline Ge(x)Sb(y)Te(z). The experiments, conducted at moderately elevated temperatures, are based on measurements of the first-order diffraction efficiency from a two-dimensional periodic array of recorded marks. When the samples are slowly heated above room temperature, changes in the efficiencies of various diffracted orders give information about the on-going crystallization process within the sample. Two different compositions of the GeSbTe alloy are used in these experiments. Measurements on Ge(2)Sb(2.3)Te(5) films show crystallization dominated by nucleation. For the Sb-rich eutectic composition Ge-(SbTe), crystallization is found to be dominated by growth from crystalline boundaries. We also show that crystalline marks written by relatively high-power laser pulses are different in their optical properties from the regions crystallized by slow heating of the sample to moderate temperatures.

  10. Acousto-optical interaction of surface acoustic and optical waves in a two-dimensional phoxonic crystal hetero-structure cavity.

    Science.gov (United States)

    Ma, Tian-Xue; Zou, Kui; Wang, Yue-Sheng; Zhang, Chuanzeng; Su, Xiao-Xing

    2014-11-17

    Phoxonic crystal is a promising material for manipulating sound and light simultaneously. In this paper, we theoretically demonstrate the propagation of acoustic and optical waves along the truncated surface of a two-dimensional square-latticed phoxonic crystal. Further, a phoxonic crystal hetero-structure cavity is proposed, which can simultaneously confine surface acoustic and optical waves. The interface motion and photoelastic effects are taken into account in the acousto-optical coupling. The results show obvious shifts in eigenfrequencies of the photonic cavity modes induced by different phononic cavity modes. The symmetry of the phononic cavity modes plays a more important role in the single-phonon exchange process than in the case of the multi-phonon exchange. Under the same deformation, the frequency shift of the photonic transverse electric mode is larger than that of the transverse magnetic mode.

  11. Optical packet switching without packet alignment

    DEFF Research Database (Denmark)

    Hansen, Peter Bukhave; Danielsen, Søren Lykke; Stubkjær, Kristian

    1998-01-01

    Operation without packet alignment of an all-optical packet switch is proposed and predicted feasible through a detailed traffic analysis. Packet alignment units are eliminated resulting in a simple switch architecture while optimal traffic performance is maintained through the flexibility provided...

  12. Isolation of Integrated Optical Acousto-Optic Switch

    Institute of Scientific and Technical Information of China (English)

    XIAO Li-Feng; LIU Ying; WANG Wei-Peng; GENG Fan

    2006-01-01

    @@ Isolation of a new structured acousto-optic switch based on an integrated optical polarization-independent quasicollinear acousto-optic tunable filter is studied in detail. The factors that influence the isolation of the optical switch are analysed, the expressions of the isolation are educed, and the isolation of the device is measured in experiment. It is found that the isolation mainly depends on the TE/TM mode intensity ratio, the mode-splitter extinction rate, and the conversion efficiency.

  13. Nonlinear interface optical switch structure for dual mode switching revisited

    Science.gov (United States)

    Bussjager, Rebecca J.; Osman, Joseph M.; Chaiken, Joseph

    1998-07-01

    There is a need for devices which will allow integration of photonic/optical computing subsystems into electronic computing architectures. This presentation reviews the nonlinear interface optical switch (NIOS) concept and then describes a new effect, the erasable optical memory (EOM) effect. We evaluate an extension of the NIOS device to allow simultaneous optical/electronic, i.e. dual mode, switching of light utilizing the EOM effect. Specific devices involve the fabrication of thin film tungsten (VI) oxide (WO3) and tungsten (V) oxide (W2O5) on the hypotenuse of glass (BK-7), fused silica (SiO2) and zinc selenide (ZnSe) right angle prisms. Chemical reactions and temporal response tests were performed and are discussed.

  14. Optical Multidimensional Switching for Data Center Networks

    DEFF Research Database (Denmark)

    Kamchevska, Valerija

    2017-01-01

    avoiding power hungry optical-electrical-optical conversions at each node. This Ph.D. thesis focuses precisely on the application of optical technologies in data center networks where optics is not only used for extending the reach, but more importantly the benefits of photonic devices are exploited...... for the purpose of deploying optical switching within the network. First, the Hi-Ring data center architecture is proposed. It is based on optical multidimensional switching nodes that provide switching in hierarchically layered space, wavelength and time domain. The performance of the Hi-Ring architecture......: the first one referring to hardware-software integration where the data plane is integrated with a centralized control plane deploying a software defined controller, and the second one referring to on-chip integration of devices in the data plane ultimately leading to integrated systems and networks on chip...

  15. United assembly algorithm for optical burst switching

    Institute of Scientific and Technical Information of China (English)

    Jinhui Yu(于金辉); Yijun Yang(杨教军); Yuehua Chen(陈月华); Ge Fan(范戈)

    2003-01-01

    Optical burst switching (OBS) is a promising optical switching technology. The burst assembly algorithm controls burst assembly, which significantly impacts performance of OBS network. This paper provides a new assembly algorithm, united assembly algorithm, which has more practicability than conventional algorithms. In addition, some factors impacting selections of parameters of this algorithm are discussed and the performance of this algorithm is studied by computer simulation.

  16. Quantum and thermal phase transitions in a bosonic atom-molecule mixture in a two-dimensional optical lattice

    Science.gov (United States)

    de Forges de Parny, L.; Rousseau, V. G.

    2017-01-01

    We study the ground state and the thermal phase diagram of a two-species Bose-Hubbard model, with U(1 ) ×Z2 symmetry, describing atoms and molecules on a two-dimensional optical lattice interacting via a Feshbach resonance. Using quantum Monte Carlo simulations and mean-field theory, we show that the conversion between the two species, coherently coupling the atomic and molecular states, has a crucial impact on the Mott-superfluid transition and stabilizes an insulating phase with a gap controlled by the conversion term—the Feshbach insulator—instead of a standard Mott-insulating phase. Depending on the detuning between atoms and molecules, this model exhibits three phases: the Feshbach insulator, a molecular condensate coexisting with noncondensed atoms, and a mixed atomic-molecular condensate. Employing finite-size scaling analysis, we observe three-dimensional (3D) X Y (3D Ising) transition when U(1 ) (Z2) symmetry is broken, whereas the transition is first order when both U(1 ) and Z2 symmetries are spontaneously broken. The finite-temperature phase diagram is also discussed. The thermal disappearance of the molecular superfluid leads to a Berezinskii-Kosterlitz-Thouless transition with unusual universal jump in the superfluid density. The loss of the quasi-long-range coherence of the mixed atomic and molecular superfluid is more subtle since only atoms exhibit conventional Berezinskii-Kosterlitz-Thouless criticality. We also observe a signal compatible with a classical first-order transition between the mixed superfluid and the normal Bose liquid at low temperature.

  17. Hybrid Optical Switching for Data Center Networks

    Directory of Open Access Journals (Sweden)

    Matteo Fiorani

    2014-01-01

    Full Text Available Current data centers networks rely on electronic switching and point-to-point interconnects. When considering future data center requirements, these solutions will raise issues in terms of flexibility, scalability, performance, and energy consumption. For this reason several optical switched interconnects, which make use of optical switches and wavelength division multiplexing (WDM, have been recently proposed. However, the solutions proposed so far suffer from low flexibility and are not able to provide service differentiation. In this paper we introduce a novel data center network based on hybrid optical switching (HOS. HOS combines optical circuit, burst, and packet switching on the same network. In this way different data center applications can be mapped to the optical transport mechanism that best suits their traffic characteristics. Furthermore, the proposed HOS network achieves high transmission efficiency and reduced energy consumption by using two parallel optical switches. We consider the architectures of both a traditional data center network and the proposed HOS network and present a combined analytical and simulation approach for their performance and energy consumption evaluation. We demonstrate that the proposed HOS data center network achieves high performance and flexibility while considerably reducing the energy consumption of current solutions.

  18. Reconfigurable optical switches with monolithic electrical-to-optical interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, J.; Zhou, P. [New Mexico Univ., Albuquerque, NM (United States). Center for High Technology Materials; Zolper, J.C.; Lear, K.L.; Vawter, G.A. [Sandia National Labs., Albuquerque, NM (United States); Leibenguth, R.E.; Adams, A.C. [AT and T Bell Labs., Breinigsville, PA (United States)

    1994-03-01

    Vertical cavity surface-emitting lasers (VCSELs) can be integrated with heterojunction phototransistors (HPTs) and heterojunction bipolar transistors (HBTs) on the same wafer to form high speed optical and optoelectronic switches, respectively, that can be optically or electrically addressed. This permits the direct communication and transmission of data between distributed electronic processors through an optical switching network. The experimental demonstration of an integrated optoelectronic HBT/VCSEL switch combining a GaAs/AlGaAs heterojunction bipolar transistor (HBT) with a VCSEL is described below, using the same epilayer structure upon which binary HPT/VCSEL optical switches are also built. The monolithic HBT/VCSEL switch has high current gain, low power dissipation, and a high optical to electrical conversion efficiency. Its modulation has been measured and modeled.

  19. Facile synthesis of CuSe nanoparticles and high-quality single-crystal two-dimensional hexagonal nanoplatelets with tunable near-infrared optical absorption

    Science.gov (United States)

    Wu, Yimin; Korolkov, Ilia; Qiao, Xvsheng; Zhang, Xianghua; Wan, Jun; Fan, Xianping

    2016-06-01

    A rapid injection approach is used to synthesize the copper selenide nanoparticles and two-dimensional single crystal nanoplates. This technique excludes the use of toxic or expensive materials, increasing the availability of two-dimensional binary chalcogenide semiconductors. The structure of the nanocrystals has been studied and the possible formation mechanism of the nanoplates has been proposed. The optical absorption showed that the nanoplates demonstrated wide and tuneable absorption band in the visible and near infrared region. These nanoplates could be interesting for converting solar energy and for nanophotonic devices operating in the near infrared.

  20. Micro electro mechanical system optical switching

    Science.gov (United States)

    Thorson, Kevin J; Stevens, Rick C; Kryzak, Charles J; Leininger, Brian S; Kornrumpf, William P; Forman, Glenn A; Iannotti, Joseph A; Spahn, Olga B; Cowan, William D; Dagel, Daryl J

    2013-12-17

    The present disclosure includes apparatus, system, and method embodiments that provide micro electo mechanical system optical switching and methods of manufacturing switches. For example, one optical switch embodiment includes at least one micro electro mechanical system type pivot mirror structure disposed along a path of an optical signal, the structure having a mirror and an actuator, and the mirror having a pivot axis along a first edge and having a second edge rotatable with respect to the pivot axis, the mirror being capable of and arranged to be actuated to pivot betweeen a position parallel to a plane of an optical signal and a position substantially normal to the plane of the optical signal.

  1. Micro electro mechanical system optical switching

    Energy Technology Data Exchange (ETDEWEB)

    Thorson, Kevin J; Stevens, Rick C; Kryzak, Charles J; Leininger, Brian S; Kornrumpf, William P; Forman, Glenn A; Iannotti, Joseph A; Spahn, Olga B; Cowan, William D; Dagel, Daryl J

    2013-12-17

    The present disclosure includes apparatus, system, and method embodiments that provide micro electo mechanical system optical switching and methods of manufacturing switches. For example, one optical switch embodiment includes at least one micro electro mechanical system type pivot mirror structure disposed along a path of an optical signal, the structure having a mirror and an actuator, and the mirror having a pivot axis along a first edge and having a second edge rotatable with respect to the pivot axis, the mirror being capable of and arranged to be actuated to pivot betweeen a position parallel to a plane of an optical signal and a position substantially normal to the plane of the optical signal.

  2. Vertically Integrated Thermo-Optic Waveguide Switch Using Optical Polymers

    Institute of Scientific and Technical Information of China (English)

    Ki-Hong; Kim; Sang-Yung; Shin; Doo-Sun; Choi

    2003-01-01

    We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than -10 dB.

  3. Vertically Integrated Thermo-Optic Waveguide Switch Using Optical Polymers

    Institute of Scientific and Technical Information of China (English)

    Ki-Hong Kim; Sang-Yung Shin; Doo-Sun Choi

    2003-01-01

    We propose and fabricate a vertically integrated thermo-optic waveguide switch. It controls the optical path between two vertically stacked waveguides using the thermo-optic effect of optical polymer. The measured crosstalk is less than-10 dB.

  4. Band-gap tuning and optical response of two-dimensional SixC1 -x : A first-principles real-space study of disordered two-dimensional materials

    Science.gov (United States)

    Sadhukhan, Banasree; Singh, Prashant; Nayak, Arabinda; Datta, Sujoy; Johnson, Duane D.; Mookerjee, Abhijit

    2017-08-01

    We present a real-space formulation for calculating the electronic structure and optical conductivity of random alloys based on Kubo-Greenwood formalism interfaced with augmented space recursion technique [Mookerjee, J. Phys. C 6, 1340 (1973), 10.1088/0022-3719/6/8/003] formulated with the tight-binding linear muffin-tin orbital basis with the van Leeuwen-Baerends corrected exchange potential [Singh, Harbola, Hemanadhan, Mookerjee, and Johnson, Phys. Rev. B 93, 085204 (2016), 10.1103/PhysRevB.93.085204]. This approach has been used to quantitatively analyze the effect of chemical disorder on the configuration averaged electronic properties and optical response of two-dimensional honeycomb siliphene SixC1 -x beyond the usual Dirac-cone approximation. We predicted the quantitative effect of disorder on both the electronic structure and optical response over a wide energy range, and the results are discussed in the light of the available experimental and other theoretical data. Our proposed formalism may open up a facile way for planned band-gap engineering in optoelectronic applications.

  5. 160-Gb/s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Switching

    DEFF Research Database (Denmark)

    Hu, Hao; Ji, Hua; Pu, Minhao;

    2015-01-01

    We experimentally demonstrate a 160-Gb/s Ethernet packet switch using an 8.6-mm-long silicon nanowire for optical burst switching, based on cross phase modulation in silicon. One of the four packets at the bit rate of 160 Gb/s is switched by an optical control signal using a silicon based 1 × 1 all......-optical packet switch. Error free performance (BER switched packet. The use of optical burst switching protocols could eliminate the need for optical buffering in silicon packet switch based optical burst switching, which might be desirable for high-speed interconnects within a short...

  6. All-optical switching in optically induced nonlinear waveguide couplers

    Energy Technology Data Exchange (ETDEWEB)

    Diebel, Falko, E-mail: falko.diebel@uni-muenster.de; Boguslawski, Martin; Rose, Patrick; Denz, Cornelia [Institut für Angewandte Physik and Center for Nonlinear Science (CeNoS), Westfälische Wilhelms-Universität Münster, 48149 Münster (Germany); Leykam, Daniel; Desyatnikov, Anton S. [Nonlinear Physics Centre, Research School of Physics and Engineering, The Australian National University, Canberra ACT 0200 (Australia)

    2014-06-30

    We experimentally demonstrate all-optical vortex switching in nonlinear coupled waveguide arrays optically induced in photorefractive media. Our technique is based on multiplexing of nondiffracting Bessel beams to induce various types of waveguide configurations. Using double- and quadruple-well potentials, we demonstrate precise control over the coupling strength between waveguides, the linear and nonlinear dynamics and symmetry-breaking bifurcations of guided light, and a power-controlled optical vortex switch.

  7. Optical Packet Switching Scheme Using Multi-optical-code Labels

    Institute of Scientific and Technical Information of China (English)

    LI Shu-wen; ZHANG Qi; YU Chong-xiu; XIN Xiang-jun; XIONG Fei

    2009-01-01

    Proposed is a novel optical code(OC) label switching scheme in which an optical label is constructed by multiple parallel optical codes. The performances of splitting loss and BER are simulated and analyzed. Simulation results show that the proposed label can be correctly recognized to perform packet switching. Compared with reported schemes using one OC as a label, the splitting loss in our proposal is lowered.

  8. 160-Gb/s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Switching

    DEFF Research Database (Denmark)

    Hu, Hao; Ji, Hua; Pu, Minhao

    2015-01-01

    We experimentally demonstrate a 160-Gb/s Ethernet packet switch using an 8.6-mm-long silicon nanowire for optical burst switching, based on cross phase modulation in silicon. One of the four packets at the bit rate of 160 Gb/s is switched by an optical control signal using a silicon based 1 × 1 all-optical...... packet switch. Error free performance (BER optical burst switching protocols could eliminate the need for optical buffering in silicon packet switch based optical burst switching, which might be desirable for high-speed interconnects within a short...

  9. Enhancement of acousto-optical coupling in two-dimensional air-slot phoxonic crystal cavities by utilizing surface acoustic waves

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Tian-Xue [Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044 (China); Wang, Yue-Sheng, E-mail: yswang@bjtu.edu.cn [Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044 (China); Zhang, Chuanzeng [Department of Civil Engineering, University of Siegen, D-57068 Siegen (Germany)

    2017-01-30

    A phoxonic crystal is a periodically patterned material that can simultaneously localize optical and acoustic modes. The acousto-optical coupling in two-dimensional air-slot phoxonic crystal cavities is investigated numerically. The photons can be well confined in the slot owing to the large electric field discontinuity at the air/dielectric interfaces. Besides, the surface acoustic modes lead to the localization of the phonons near the air-slot. The high overlap of the photonic and phononic cavity modes near the slot results in a significant enhancement of the moving interface effect, and thus strengthens the total acousto-optical interaction. The results of two cavities with different slot widths show that the coupling strength is dependent on the slot width. It is expected to achieve a strong acousto-optical/optomechanical coupling in air-slot phoxonic crystal structures by utilizing surface acoustic modes. - Highlights: • Two-dimensional air-slot phoxonic crystal cavities which can confine simultaneously optical and acoustic waves are proposed. • The acoustic and optical waves are highly confined near/in the air-slot. • The high overlap of the photonic and phononic cavity modes significantly enhances the moving interface effect. • Different factors which affect the acousto-optical coupling are discussed.

  10. Investigational study of optical function materials for two-dimensional data processing; Nijigen joho shoriyo hikari kino zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated/studied `space light modulation materials,` `dynamic hologram/memory materials,` `optical waveguide path materials,` etc. which become key materials in the high speed two dimensional processing. As to electrooptical materials proposed in this investigational study, the external electric field and the electric charges generated make quality of molecules themselves directly change to memory strong/weak signals of light. Therefore, the response velocity becomes less than a millionth of that of the liquid crystal display, and high speed which is needed for realtime moving image processing is anticipated. Hologram includes the phase information in addition to information on light strength. Therefore, it is a large capacity record medium and at the same time a record medium which can read/write two dimensional information as it is. With optical fiber, images cannot be transmitted as they are. Light waveguide path materials are those that accumulate roles of mirror and lens in a sheet of the material and construct a system which is strong in vibration, as optical parts connecting among materials for two dimensional data processing. 273 refs., 107 figs., 17 tabs.

  11. Silicon-on-insulator multimode-interference waveguide-based arrayed optical tweezers (SMART) for two-dimensional microparticle trapping and manipulation.

    Science.gov (United States)

    Lei, Ting; Poon, Andrew W

    2013-01-28

    We demonstrate two-dimensional optical trapping and manipulation of 1 μm and 2.2 μm polystyrene particles in an 18 μm-thick fluidic cell at a wavelength of 1565 nm using the recently proposed Silicon-on-insulator Multimode-interference (MMI) waveguide-based ARrayed optical Tweezers (SMART) technique. The key component is a 100 μm square-core silicon waveguide with mm length. By tuning the fiber-coupling position at the MMI waveguide input facet, we demonstrate various patterns of arrayed optical tweezers that enable optical trapping and manipulation of particles. We numerically simulate the physical mechanisms involved in the arrayed trap, including the optical force, the heat transfer and the thermal-induced microfluidic flow.

  12. Optical probing of the metal-to-insulator transition in a two-dimensional high-mobility electron gas

    Energy Technology Data Exchange (ETDEWEB)

    Dionigi, F; Rossella, F; Bellani, V [Dipartimento di Fisica ' A Volta' and CNISM, Universita degli Studi di Pavia, 27100 Pavia (Italy); Amado, M [GISC and Departamento de Fisica de Materiales, Universidad Complutense, 28040 Madrid (Spain); Diez, E [Laboratorio de Bajas Temperaturas, Universidad de Salamanca, 37008 Salamanca (Spain); Kowalik, K [Laboratoire National des Champs Magnetiques Intenses, CNRS, 38042 Grenoble (France); Biasiol, G [Istituto Officina dei Materiali CNR, Laboratorio TASC, 34149 Trieste (Italy); Sorba, L, E-mail: vittorio.bellani@unipv.it [NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, 56126 Pisa (Italy)

    2011-06-15

    We study the quantum Hall liquid and the metal-insulator transition in a high-mobility two-dimensional electron gas, by means of photoluminescence and magnetotransport measurements. In the integer and fractional regime at {nu}>1/3, by analyzing the emission energy dispersion we probe the magneto-Coulomb screening and the hidden symmetry of the electron liquid. In the fractional regime above {nu}=1/3, the system undergoes metal-to-insulator transition, and in the insulating phase the dispersion becomes linear with evidence of an increased renormalized mass.

  13. Terahertz optical-Hall effect characterization of two-dimensional electron gas properties in AlGaN/GaN high electron mobility transistor structures

    Science.gov (United States)

    Schöche, S.; Shi, Junxia; Boosalis, A.; Kühne, P.; Herzinger, C. M.; Woollam, J. A.; Schaff, W. J.; Eastman, L. F.; Schubert, M.; Hofmann, T.

    2011-02-01

    The free-charge carrier mobility, sheet density, and effective mass of a two-dimensional electron gas are exemplarily determined in the spectral range from 640 GHz to 1 THz in a AlGaN/GaN heterostructure using the optical-Hall effect at room temperature. Complementary midinfrared spectroscopic ellipsometry measurements are performed for analysis of heterostructure constituents layer thickness, phonon mode, and free-charge carrier parameters. The electron effective mass is determined to be (0.22±0.04)m0. The high-frequency sheet density and carrier mobility parameters are in good agreement with results from dc electrical Hall effect measurements, indicative for frequency-independent carrier scattering mechanisms of the two-dimensional carrier distribution.

  14. Evaluation of laser diode based optical switches for optical processors

    Science.gov (United States)

    Swanson, Paul D.; Parker, Michael A.; Libby, Stuart I.

    1993-07-01

    Three optical switching elements have been designed, fabricated, and tested for use in an integrated, optical signal processor. The first, an optical NOR logic gate, uses gain quenching as a means of allowing one (or more) light beam(s) to control the output light. This technique, along with the use of a two pad bistable output laser, is used in demonstrating the feasibility of the second device, an all optical RS flip flop. The third device consists of a broad area orthogonal model switching laser, whose corollary outputs correspond to the sign of the voltage difference between its two high impedance electrical inputs. This device also has possible memory applications if bistable mode switching within the broad area laser can be achieved.

  15. Node design in optical packet switched networks

    DEFF Research Database (Denmark)

    Nord, Martin

    2006-01-01

    The thesis discusses motivation, realisation and performance of the Optical Packet Switching (OPS) network paradigm. The work includes proposals for designs and methods to efficiently use both the wavelength- and time domain for contention resolution in asynchronous operation. The project has also...... adapting network performance to the different acceptable packet loss rate levels of supported applications, while improving overall bandwidth efficiency. The project has evaluated QoS differentiation methods and proposed schemes with improved efficiency, which also include jitter sensitivity as a Qo...... proposed parallel designs to overcome scalability constraints and to support migration scenarios. Furthermore, it has proposed and demonstrated optical input processing schemes for hybrids networks to simultaneously support OPS and Optical Circuit Switching. Quality of Service (QoS) differentiation enables...

  16. Passive optical switches based on endohedral fullerenes

    Science.gov (United States)

    Dong, Yongchang; Deepika Saini Collaboration; Luis A. Echegoyen Collaboration; Ramakrishna Podila Collaboration

    Although there have been many attempts to find better nanomaterial-based optical limiters & switches in recent years, currently there are only a few effective options for high-energy lasers. Reverse saturable absorption in fullerenes has been widely used to realize excellent passive optical limiters for the visible region up to 650 nm. The electronic structure of fullerenes can be modified by the encapsulation of endohedral clusters to achieve exotic quantum states of matter such as superconductivity. Building on this concept, in this talk, we show that three tri-metallic nitride endohedral fullerenes could alter the HOMO-LUMO gap and allow passive optical switching with a low limiting threshold (0.3 J/cm2) and a wider operation window up to 1064 nm (average pulse energy>0.5 mJ in ns regime).

  17. Design and Simulation of Routing-switching Protocol Based on Optical Switch Array

    Institute of Scientific and Technical Information of China (English)

    HE Wei; MAO You-ju; LIU Jiang

    2004-01-01

    An optical routing- switching technology based on optical switch array is proposed. The characteristics of the blocking and nonblocking networks are analyzed and compared, odd- even sorting network is used to realize optical routing- switching, relative routing- switching protocol is designed.Simulation test under load shows that it can reduce a blocking effectively and enhance an efficiency of switching. Further, it can transfer the processing and switching within parallel computer from electric domain to optical domain. It can make parallel computer coordinating computing and processing at much more higher speed, storing and transmitting even more efficiently.

  18. Two Novel Structures of Optical Packet Switching Nodes

    Institute of Scientific and Technical Information of China (English)

    YIN Hongxi; XU Anshi; WU Deming

    2001-01-01

    All-optical packet switching networkis currently one of the research hotspots of all-opticalcommunication networks and optical packet switchingnodes are the key technique of optical packet switch-ing network. In this paper, two novel structures ofoptical packet switching nodes are put forward, and the switching capacity of the node and the packet con-tention resolution are analyzed. These two switchingarchitectures can realize wavelength routing switchingfunction and broadcast-and-select switching functionrespectively. They are simple but efficient for realizingoptical packet switching network.

  19. Research of high speed optical switch based on compound semiconductor

    Institute of Scientific and Technical Information of China (English)

    WANG MingHua; QI Wei; YU Hui; JIANG XiaoQing; YANG JianYi

    2009-01-01

    High-speed optical switch and its array are the crucial components of all-optical switching system. This paper presents the analytical model of a total-internal-reflection (TIR) optical switch. By employing the carrier injection effect in GaAs and the GaAs/AlGaAs double heterojunction structure, the X-junction TIR switch and the Mach-Zehnder interference (MZI) switch are demonstrated at 1.55 IJm. The measured results show that the extinction ratio of both switches exceeds 20 dB. The switching speed reaches the scale of 10 ns.

  20. Electronic equivalence of optical negative refraction and retroreflection in the two-dimensional systems with inhomogeneous spin-orbit couplings

    Science.gov (United States)

    Lv, Bo; Ma, Zhongshui

    2013-01-01

    The negative refracted transmission and retroreflection of electrons in low-electron-density semiconductors, in the presence of spin-orbit coupling, are theoretically predicted. It is shown that negative electronic transport may occur owing to the occurrence of additional states whose wave vectors are antiparallel to their group velocities. We conclude that the transport emerges as negative in nature in the scattering process if the sign of its ray equation is reversed with respect to that of the incidence's. We demonstrate this finding in the hybrid of two-dimensional electron gases with different Rashba spin-orbit couplings. We also show that the fundamental of negative electric transport is promising to focus a divergent electronic beam in a spintronic sandwich structure with flat surfaces.

  1. Optical properties of the two-port resonant tunneling filters in two-dimensional photonic crystal slabs

    Institute of Scientific and Technical Information of China (English)

    Ren Cheng; Cheng Li-Feng; Kang Feng; Gan Lin; Zhang Dao-Zhong; Li Zhi-Yuan

    2012-01-01

    We have designed and fabricated two types of two-port resonant tunneling filters with a triangular air-hole lattice in two-dimensional photonic crystal slabs.In order to improve the filtering efficiency,a feedback method is introduced by closing the waveguide.It is found that the relative position between the closed waveguide boundary and the resonator has an important impact on the dropping efficiency.Based on our analyses,two different types of filters are designed.The transmission spectra and scattering-light far-field patterns are measured,which agree well with theoretical prediction.In addition,the resonant filters are highly sensitive to the size of the resonant cavities,which are useful for practical applications.

  2. Integrated photonic switches for nanosecond packet-switched optical wavelength conversion

    Science.gov (United States)

    Fidaner, Onur; Demir, Hilmi Volkan; Sabnis, Vijit A.; Zheng, Jun-Fei; Harris, James S., Jr.; Miller, David A. B.

    2006-01-01

    We present a multifunctional photonic switch that monolithically integrates an InGaAsP/InP quantum well electroabsorption modulator and an InGaAs photodiode as a part of an on-chip, InP optoelectronic circuit. The optical multifunctionality of the switch offers many configurations to allow for different optical network functions on a single chip. Here we experimentally demonstrate GHz-range optical wavelength-converting switching with only ~10 mW of absorbed input optical power, electronically controlled packet switching with a reconfiguration time of <2.5 ns, and optically controlled packet switching in <300 ps.

  3. All-optical cryptography of M-QAM formats by using two-dimensional spectrally sliced keys.

    Science.gov (United States)

    Abbade, Marcelo L F; Cvijetic, Milorad; Messani, Carlos A; Alves, Cleiton J; Tenenbaum, Stefan

    2015-05-10

    There has been an increased interest in enhancing the security of optical communications systems and networks. All-optical cryptography methods have been considered as an alternative to electronic data encryption. In this paper we propose and verify the use of a novel all-optical scheme based on cryptographic keys applied on the spectral signal for encryption of the M-QAM modulated data with bit rates of up to 200 gigabits per second.

  4. Elucidating gigahertz acoustic modulation of extraordinary optical transmission through a two-dimensional array of nano-holes

    Science.gov (United States)

    Ulbricht, R.; Sakuma, H.; Imade, Y.; Otsuka, P. H.; Tomoda, M.; Matsuda, O.; Kim, H.; Park, G.-W.; Wright, O. B.

    2017-02-01

    The ultrafast modulation of light transmitted by a metamaterial making up an extraordinary optical transmission geometry is investigated by means of optical pump-probe spectroscopy. Using a sample consisting of a lattice of square nano-holes in a gold film on a glass substrate, we monitor the high-frequency oscillations in the intensity of transmitted infrared light. A variety of gigahertz acoustic modes, involving the opening and shutting motion of the holes as well as the straining of the glass substrate below the holes, are revealed to be active in the optical modulation. Numerical simulations of the transient deformations and strain fields elucidate the nature of the vibrational modes contributing most strongly to the variations in optical transmission, and point to the hole-area modulation as the dominant effect. Potential applications include ultrafast acousto-optic modulators.

  5. Impact of Radii Ratios on a Two-Dimensional Cloaking Structure and Corresponding Analysis for Practical Design at Optical Wavelengths

    Directory of Open Access Journals (Sweden)

    Nadia Anam

    2017-01-01

    Full Text Available This work is an extension to the evaluation and analysis of a two-dimensional cylindrical cloak in the Terahertz or visible range spectrum using Finite Difference Time-Domain (FDTD method. It was concluded that it is possible to expand the frequency range of a cylindrical cloaking model by careful scaling of the inner and outer radius of the simulation geometry with respect to cell size and/or number of time steps in the simulation grid while maintaining appropriate stability conditions. Analysis in this study is based on a change in the radii ratio, that is, outer radius to inner radius, of the cloaking structure for an array of wavelengths in the visible spectrum. Corresponding outputs show inconsistency in the cloaking pattern with respect to frequency. The inconsistency is further increased as the radii ratio is decreased. The results also help to establish a linear relationship between the transmission coefficient and the real component of refractive index with respect to different radii ratios which may simplify the selection of the material for practical design purposes. Additional performance analysis is carried out such that the dimensions of the cloak are held constant at an average value and the frequency varied to determine how a cloaked object may be perceived by the human eye which considers different wavelengths to be superimposed on each other simultaneously.

  6. Highly sensitive size discrimination of sub-micron objects using optical Fourier processing based on two-dimensional Gabor filters

    National Research Council Canada - National Science Library

    Robert M. Pasternack; Zhen Qian; Jing-Yi Zheng; Dimitris N. Metaxas; Nada N. Boustany

    2009-01-01

    .... The method consists of applying an optical Fourier filter bank consisting of Gabor-like filters of varying periods and extracting the optimum filter period that maximizes the filtered object signal...

  7. An optical comparator for measuring two-dimensional polyacrylamide gel electrophoresis records using an on-line microcomputer.

    Science.gov (United States)

    Spragg, S P; Jones, M I; Hill, B J

    1983-03-01

    A comparator which makes it possible to compare two wet gels or photographic negatives or autoradiograms through a flickering light system has been built. The system consists of two special-purpose projectors which combine the images on a digitizing platform. When the lights are switched On and off out of phase, the positions of the common components remain unchanged, whereas those that are spatially displaced appear to jump from side to side and those present in one image but not the other switch on and off. This produces a flickering image in which differences are readily seen. Commercial camera lenses were used to construct the projectors and the overall specifications for the system are given. The coordinates of both the displaced components, as well as the selected standards from the two images, are digitized and entered automatically into an on-line microcomputer. By using an iterative procedure for collecting records from several superimposable records of the gel, it is possible to compensate for the lack of total reproducibility over the whole gels. These coordinates are then normalized and superimposed on a master map through a television display using a curser to adjust the coordinates. The whole procedure can be repeated for many gels using a common reference gel in the comparator, and the result is a set of normalized coordinates which can be plotted on a single map to provide a final record of the experiments.

  8. Projectile Two-dimensional Coordinate Measurement Method Based on Optical Fiber Coding Fire and its Coordinate Distribution Probability

    Science.gov (United States)

    Li, Hanshan; Lei, Zhiyong

    2013-01-01

    To improve projectile coordinate measurement precision in fire measurement system, this paper introduces the optical fiber coding fire measurement method and principle, sets up their measurement model, and analyzes coordinate errors by using the differential method. To study the projectile coordinate position distribution, using the mathematical statistics hypothesis method to analyze their distributing law, firing dispersion and probability of projectile shooting the object center were put under study. The results show that exponential distribution testing is relatively reasonable to ensure projectile position distribution on the given significance level. Through experimentation and calculation, the optical fiber coding fire measurement method is scientific and feasible, which can gain accurate projectile coordinate position.

  9. Two-dimensional electron gas in the regime of strong light-matter coupling: Dynamical conductivity and all-optical measurements of Rashba and Dresselhaus coupling

    Science.gov (United States)

    Yudin, Dmitry; Shelykh, Ivan A.

    2016-10-01

    A nonperturbative interaction of an electronic system with a laser field can substantially modify its physical properties. In particular, in two-dimensional (2D) materials with a lack of inversion symmetry, the achievement of a regime of strong light-matter coupling allows direct optical tuning of the strength of the Rashba spin-orbit interaction (SOI). Capitalizing on these results, we build a theory of the dynamical conductivity of a 2D electron gas with both Rashba and Dresselhaus SOIs coupled to an off-resonant high-frequency electromagnetic wave. We argue that strong light-matter coupling modifies qualitatively the dispersion of the electrons and can be used as a powerful tool to probe and manipulate the coupling strengths and adjust the frequency range where optical conductivity is essentially nonzero.

  10. Single-lens Fourier-transform-based optical color image encryption using dual two-dimensional chaotic maps and the Fresnel transform.

    Science.gov (United States)

    Su, Yonggang; Tang, Chen; Li, Biyuan; Chen, Xia; Xu, Wenjun; Cai, Yuanxue

    2017-01-20

    We propose an optical color image encryption system based on the single-lens Fourier transform, the Fresnel transform, and the chaotic random phase masks (CRPMs). The proposed encryption system contains only one optical lens, which makes it more efficient and concise to implement. The introduction of the Fresnel transform makes the first phase mask of the proposed system also act as the main secret key when the input image is a non-negative amplitude-only map. The two CRPMs generated by dual two-dimensional chaotic maps can provide more security to the proposed system. In the proposed system, the key management is more convenient and the transmission volume is reduced greatly. In addition, the secret keys can be updated conveniently in each encryption process to invalidate the chosen plaintext attack and the known plaintext attack. Numerical simulation results have demonstrated the feasibility and security of the proposed encryption system.

  11. Highly sensitive size discrimination of sub-micron objects using optical Fourier processing based on two-dimensional Gabor filters.

    Science.gov (United States)

    Pasternack, Robert M; Qian, Zhen; Zheng, Jing-Yi; Metaxas, Dimitris N; Boustany, Nada N

    2009-07-06

    We use optical Gabor-like filtering implemented with a digital micromirror device to achieve nanoscale sensitivity to changes in the size of finite and periodic objects imaged at low resolution. The method consists of applying an optical Fourier filter bank consisting of Gabor-like filters of varying periods and extracting the optimum filter period that maximizes the filtered object signal. Using this optimum filter period as a measure of object size, we show sensitivity to a 7.5 nm change in the period of a chirped phase mask with period around 1 microm. We also show 30 nm sensitivity to change in the size of polystyrene spheres with diameters around 500 nm. Unlike digital post-processing our optical processing method retains its sensitivity when implemented at low magnification in undersampled images. Furthermore, the optimum Gabor filter period found experimentally is linearly related to sphere diameter over the range 0.46 microm-1 microm and does not rely on a predictive scatter model such as Mie theory. The technique may have applications in high throughput optical analysis of subcellular morphology to study organelle function in living cells.

  12. Wavelength switching in an optical klystron

    Energy Technology Data Exchange (ETDEWEB)

    Berryman, K.W.; Smith, T.I. [Stanford Univ., CA (United States)

    1995-12-31

    A symmetric optical klystron consists of two identical undulator sections separated a dispersive section. For a device of a given length, an optical klystron is capable of producing much more bunching, and therefore more gain, than a traditional undulator. Another consequence of introducing dispersion between two undulator sections is that the overall spontaneous radiation pattern results from the interference between the two undulator sections, and as such resembles a standard undulator radiation pattern modulated by a sinusoidal interference term. The presence of several wavelength peaks in the spontaneous lineshape implies an equal number of peaks in the gain spectrum. If the strength of the dispersion section is adjusted to provide nearly equal gain on the two largest of these peaks, then they will compete, and the FEL may switch wavelengths based on noise, cavity length, or other perturbations. We provide the first observations of this behavior, using the FIREFLY system at the Stanford Picosecond FEL Center. In FIREFLY, relative wavelength switching by more than 3%--more than twice the laser linewidth-has been observed by varying dispersion section strength, while at intermediate points stable switching has also been observed as a function of cavity length.

  13. Energy-efficient optical line terminal for WDM-OFDM-PON based on two-dimensional subcarrier and layer allocation.

    Science.gov (United States)

    Hu, Xiaofeng; Cao, Pan; Zhuang, Zhiming; Zhang, Liang; Yang, Qi; Su, Yikai

    2012-11-05

    We propose and experimentally demonstrate a scheme to reduce the energy consumption of optical line terminal (OLT) in wavelength division multiplexing - orthogonal frequency division multiplexing - passive optical networks (WDM-OFDM-PONs). In our scheme, a wireless communication technique, termed layered modulation, is introduced to maximize the transmission capacity of OFDM modulation module in the OLT by multiplexing data from different ONU groups with signal-to-noise ratio (SNR) margins onto the same subcarriers. With adaptive and dynamic subcarrier and layer allocation, several ONU groups with low traffic demands can share one OFDM modulation module to deliver their data during non-peak hours of a day, thus greatly reducing the number of running devices and minimizing the energy consumption of the OLT. Numerical calculation shows that an energy efficiency improvement of 28.3% in the OLT can be achieved by using proposed scheme compared to the conventional WDM-OFDM-PON.

  14. Optical selection rules for excitonic Rydberg series in the massive Dirac cones of hexagonal two-dimensional materials

    Science.gov (United States)

    Gong, Pu; Yu, Hongyi; Wang, Yong; Yao, Wang

    2017-03-01

    We investigate the optical transition selection rules for excitonic Rydberg series formed in massive Dirac cones. The entanglement of the exciton envelop function with the pseudospin texture leads to anomalous selection rules for one-photon generation of excitons, where d orbitals can be excited with the opposite helicity selection rule from the s orbitals in a given valley. The trigonal warping effects in realistic hexagonal lattices further renders more excited states bright, where p orbitals can also be accessed by one-photon excitation with the opposite valley selection rules to the s orbitals. The one-photon generation of exciton in the various states and the intraexcitonic transition between these states are both dictated by the discrete in-plane rotational symmetry of the lattices, and our results show that in hexagonal 2D materials the symmetry allowed transitions are enabled when trigonal warping effects are included in the massive Dirac fermion model. In monolayer transition metal dichalcogenides where excitons can be generated by visible light and intraexcitonic transitions can be induced by infrared light, we give the strength of these optical transitions, estimated using modified hydrogenlike envelope functions combined with the optical transition matrix elements between the Bloch states calculated at various k points.

  15. Optimal on/off scheme for all-optical switching

    DEFF Research Database (Denmark)

    Kristensen, Philip Trøst; Heuck, Mikkel; Mørk, Jesper

    2012-01-01

    We present a two-pulsed on/off scheme based on coherent control for fast switching of the optical energy in a micro cavity and use calculus of variations to optimize the switching in terms of energy.......We present a two-pulsed on/off scheme based on coherent control for fast switching of the optical energy in a micro cavity and use calculus of variations to optimize the switching in terms of energy....

  16. Strongly interacting two-dimensional Dirac fermions

    NARCIS (Netherlands)

    Lim, L.K.; Lazarides, A.; Hemmerich, Andreas; de Morais Smith, C.

    2009-01-01

    We show how strongly interacting two-dimensional Dirac fermions can be realized with ultracold atoms in a two-dimensional optical square lattice with an experimentally realistic, inherent gauge field, which breaks time reversal and inversion symmetries. We find remarkable phenomena in a temperature

  17. Conditionally sampled two-dimensional optical wavefront measurements in the near-nozzle region of a heated axisymmetric jet

    Science.gov (United States)

    Hugo, Ronald J.; McMackin, Lenore J.

    1996-10-01

    The time-evolution of optical degradation in the near nozzle region of a heated axisymmetric jet is measured using conditional sampling techniques. A novel linearized stability experiment is performed in order to identify the flowfield states most applicable for conditional sampling techniques. The results of the conditional sampling experiment exhibit a condition where two distinct flowfield states are evident. Potential explanations for the observance of these two distinct states are proposed, with the most probable explanation being due to pi-jumps that can arise between the phase of the excitation signal and the phase of the flowfield events.

  18. Facile synthesis of CuSe nanoparticles and high-quality single-crystal two-dimensional hexagonal nanoplatelets with tunable near-infrared optical absorption

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yimin [State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Korolkov, Ilia [Laboratory of Glasses and Ceramics, Institute of Chemistry, CNRS-Université de Rennes I, Campus de Beaulieu, 35042 Rennes Cedex (France); Qiao, Xvsheng [State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Zhang, Xianghua [Laboratory of Glasses and Ceramics, Institute of Chemistry, CNRS-Université de Rennes I, Campus de Beaulieu, 35042 Rennes Cedex (France); Wan, Jun; Fan, Xianping [State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China)

    2016-06-15

    A rapid injection approach is used to synthesize the copper selenide nanoparticles and two-dimensional single crystal nanoplates. This technique excludes the use of toxic or expensive materials, increasing the availability of two-dimensional binary chalcogenide semiconductors. The structure of the nanocrystals has been studied and the possible formation mechanism of the nanoplates has been proposed. The optical absorption showed that the nanoplates demonstrated wide and tuneable absorption band in the visible and near infrared region. These nanoplates could be interesting for converting solar energy and for nanophotonic devices operating in the near infrared. - Graphical abstract: TEM images of the copper selenides nanoparticles and nanoplates synthesized at 180 °C for 0 min, 10 min, 60 min. And the growth mechanism of the copper selenide nanoplates via the “oriented attachment”. Display Omitted - Highlights: • CuSe nanoparticles and nanoplates are synthesized by a rapid injection approach. • CuSe band gap can be widely tuned simply by modifying the synthesized time. • Al{sup 3+} ions have a significant impact on the growth rate of the nanoplates. • Growth mechanism of the CuSe nanoplates is based on the “oriented attachment”.

  19. Approach to quantify two-dimensional strain of chick embryonic heart in early stage based on spectral domain optical coherence tomography

    Science.gov (United States)

    Zhao, Yuqian; Dou, Shidan; Zhu, Wenlong; Wang, Yi; Xu, Tao; Wang, Fengwen; Ma, Zhenhe

    2015-03-01

    The heart undergoes remarkable changes during embryonic development due to genetic programming and epigenetic influences, in which mechanical loads is a key factor. As embryonic research development, an important goal is to develop mathematical models that describe the influence of mechanics on embryonic heart development. However, basic parameters for the modeling are difficult to acquire since the embryonic heart is tiny and beating fast in the early stages. Optical coherence tomography (OCT) technique provides depth-resolved image with high resolution and high acquisition speed in a noninvasive manner. In this paper, we performed 4D[(x,y,z) + t] scan on the outflow tract (OFT) of the chick embryonic heart at stage of HH18(~ 3 days of incubation) in vivo using spectral domain OCT (SDOCT). Parameters such as displacement and geometrical size of the OFT were extracted from the structural images of the SDOCT. Two-dimensional strain vector were solved using strain-displacement relations in curvilinear cylindrical coordinates based on kinetic theory of elasticity. Based on the geometrical size and other initial conditions, two-dimensional elasticity finite element model of the OFT myocardial wall deformation were established and then solved by direct frequency response method. Comparison between experimental data and simulation result shows the utility of the finite element models. Our results demonstrate that mathematical modeling based on parameters provided by SDOCT is a useful approach for studying cardiac development in early stage.

  20. Optical absorbance and band-gap engineering of (BN) 1 -x(C2)x two-dimensional alloys: Phase separation and composition fluctuation effects

    Science.gov (United States)

    Guilhon, I.; Marques, M.; Teles, L. K.; Bechstedt, F.

    2017-01-01

    The (BN) 1 -x(C2)x alloys are promising materials for band-gap engineering in two-dimensional electronics. In this work, we provide a complete scenario of statistical possibilities for the distribution of atoms and its influence on electronic and optical properties. Using first-principles calculations combined with the generalized quasichemical approximation to account for disorder effects, we study the properties of these two-dimensional alloys as a function of their average composition. Our results show that atomic arrangements with C-C and B-N bonds are energetically favored over the ones with B-B and N-N bonds, explaining the known tendency to phase separation, verified by a T -x phase diagram. We calculate the energy gap as a function of the composition considering both composition fluctuation and phase separation effects. Experimental data are discussed in this context. Finally, we obtain absorption spectra reproducing a two-peak pattern for intermediate carbon concentrations found experimentally and identified with phase-segregated instead of homogeneous alloys.

  1. All-optical devices for ultrafast packet switching

    DEFF Research Database (Denmark)

    Dorren, H.J.S.; HerreraDorren, J.; Raz, O.;

    2007-01-01

    We discuss integrated devices for all-optical packet switching. We focus on monolithically integrated all-optical flip-flops, ultra-fast semiconductor based wavelength converters and explain the operation principles. Finally, a 160 Gb/s all-optical packet switching experiment over 110 km of field...

  2. Optical Transient-Grating Measurements of Spin Diffusion andRelaxation in a Two-Dimensional Electron Gas

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Christopher Phillip [Univ. of California, Berkeley, CA (United States)

    2005-01-01

    Spin diffusion in n-GaAs quantum wells, as measured by our optical transient-grating technique, is strongly suppressed relative to that of charge. Over a broad range of temperatures and dopings, the suppression of Ds relative to Dc agrees quantitatively with the prediction of ''spin Coulomb dra'' theory, which takes into account the exchange of spin in electron-electron collisions. Moreover, the spin-diffusion length, Ls, is a nearly constant 1 micrometer over the same range of T and n, despite Ds's varying by nearly two orders of magnitude. This constancy supports the D'yakonov-Perel'-Kachorovskii model of spin relaxation through interrupted precessional dephasing in the spin-orbit field.

  3. Spin-orbital exchange of strongly interacting fermions in the p band of a two-dimensional optical lattice.

    Science.gov (United States)

    Zhou, Zhenyu; Zhao, Erhai; Liu, W Vincent

    2015-03-13

    Mott insulators with both spin and orbital degeneracy are pertinent to a large number of transition metal oxides. The intertwined spin and orbital fluctuations can lead to rather exotic phases such as quantum spin-orbital liquids. Here, we consider two-component (spin 1/2) fermionic atoms with strong repulsive interactions on the p band of the optical square lattice. We derive the spin-orbital exchange for quarter filling of the p band when the density fluctuations are suppressed, and show that it frustrates the development of long-range spin order. Exact diagonalization indicates a spin-disordered ground state with ferro-orbital order. The system dynamically decouples into individual Heisenberg spin chains, each realizing a Luttinger liquid accessible at higher temperatures compared to atoms confined to the s band.

  4. Optical Transient-Grating Measurements of Spin Diffusion andRelaxation in a Two-Dimensional Electron Gas

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Christopher P.

    2005-12-15

    Spin diffusion in n-GaAs quantum wells, as measured by our optical transient-grating technique, is strongly suppressed relative to that of charge. Over a broad range of temperatures and dopings, the suppression of Ds relative to Dc agrees quantitatively with the prediction of ''spin Coulomb dra'' theory, which takes into account the exchange of spin in electron-electron collisions. Moreover, the spin-diffusion length, Ls, is a nearly constant 1 micrometer over the same range of T and n, despite Ds's varying by nearly two orders of magnitude. This constancy supports the D'yakonov-Perel'-Kachorovskii model of spin relaxation through interrupted precessional dephasing in the spin-orbit field.

  5. Nanofiber-based all-optical switches

    CERN Document Server

    Kien, Fam Le

    2016-01-01

    We study all-optical switches operating on a single four-level atom with the $N$-type transition configuration in a two-mode nanofiber cavity with a significant length (on the order of $20$ mm) and a moderate finesse (on the order of 300) under the electromagnetically induced transparency (EIT) conditions. In our model, the gate and probe fields are the quantum nanofiber-cavity fields excited by weak classical light pulses, and the parameters of the $D_2$ line of atomic cesium are used. We examine two different switching schemes. The first scheme is based on the effect of the presence of a photon in the gate mode on the EIT of the probe mode. The second scheme is based on the use of EIT to store a photon of the gate mode in the population of an appropriate atomic level, which leads to the reduction of the transmission of the field in the probe mode. We investigate the dependencies of the switching contrast on various parameters, such as the cavity length, the mirror reflectivity, and the detunings and powers ...

  6. Numerical design of X-ray tabletop Talbot interferometer using polycapillary optics as two-dimensional gratings with high aspect ratio

    Science.gov (United States)

    Sun, Weiyuan; Liu, Zhiguo; Sun, Tianxi; Sun, Xuepeng; Li, Fangzuo; Jiang, Bowen; Ding, Xunliang

    2015-12-01

    The polycapillary optics was proposed to be used as two-dimensional X-ray gratings with high aspect ratios for high energy X-rays. The X-ray Talbot interferometer was designed numerically using the polycapillary X-ray gratings and a conventional X-ray source. The simulation showed that it was available to get a high-aspect-ratio pattern of the polycapillary X-ray gratings for higher energies than 60 keV. Moreover, this design of polycapillary gratings decreased the requirement for high power of the X-ray source. The polycapillary X-ray gratings had potential applications in X-ray imaging technology for medical fields, industrial nondestructive tests, public security, physical science, chemical analysis, life science, nanoscience biology and energy science.

  7. Drude weight in quasi-two-dimensional organic conductors close to the Mott transition: Optical studies of the bandwidth, filling and temperature dependence

    Energy Technology Data Exchange (ETDEWEB)

    Drichko, Natalia [Ioffe Physico-Technical Institute, Polytekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); 1. Physikalisches Institut, Universitaet Stuttgart, Pfaffenwaldring 57, 70550 Stuttgart (Germany)], E-mail: drichko@pi1.physik.uni-stuttgart.de; Dumm, Michael; Faltermeier, Daniel; Dressel, Martin [1. Physikalisches Institut, Universitaet Stuttgart, Pfaffenwaldring 57, 70550 Stuttgart (Germany); Merino, Jaime [Dept. de Fisica Teorica de la Materia Condensada, Universidad Autonoma de Madrid (Spain); Greco, Andres [Facultad de Ciencias Exactas Ingenieria y Agrimensura e Instituto de Fisica Rosario (UNR-CONICET), Rosario (Argentina)

    2007-09-01

    We explore the effects of electronic correlations in quasi-two-dimensional BEDT-TTF-based organic conductors with half, quarter and 1/5-filled bands. Close to the Mott transition but still on the metallic side, quasiparticles are observed in the 1/2-filled systems only at temperatures well below 100 K, with a considerable growth of the Drude-like contribution. In contrast, the 1/4-filled conductors show a zero-frequency conduction peak already at room temperature which increases slightly upon cooling. Basically no change with temperature is observed for the Drude contribution of the 1/5-filled compound. Optical studies allow us to investigate the formation of quasiparticles at low temperature for systems of different filling. The strongest effect is observed in 1/2-filled compounds, it becomes weaker in 1/4 filled, while in the 1/5-filled compound no change of the Dude-peak on temperature is seen.

  8. Zeeman-insensitive cooling of a single atom to its two-dimensional motional ground state in tightly focused optical tweezers

    Science.gov (United States)

    Sompet, P.; Fung, Y. H.; Schwartz, E.; Hunter, M. D. J.; Phrompao, J.; Andersen, M. F.

    2017-03-01

    We combine near-deterministic preparation of a single atom with Raman sideband cooling, to create a push-button mechanism to prepare a single atom in the motional ground state of tightly focused optical tweezers. In the two-dimensional (2D) radial plane, we achieve a large ground-state fidelity for the entire procedure (loading and cooling) of ˜0.73 , while the ground-state occupancy is ˜0.88 for realizations with a single atom present. For 1D axial cooling, we attain a ground-state fraction of ˜0.52 . The combined 3D cooling provides a ground-state population of ˜0.11 . Our Raman sideband cooling variation is indifferent to magnetic field fluctuations, allowing widespread unshielded experimental implementations. Our work provides a pathway towards a range of coherent few-body experiments.

  9. An algorithm for circular test and improved optical configuration by two-dimensional (2D) laser heterodyne interferometer

    Science.gov (United States)

    Tang, Shanzhi; Yu, Shengrui; Han, Qingfu; Li, Ming; Wang, Zhao

    2016-09-01

    Circular test is an important tactic to assess motion accuracy in many fields especially machine tool and coordinate measuring machine. There are setup errors due to using directly centring of the measuring instrument for both of contact double ball bar and existed non-contact methods. To solve this problem, an algorithm for circular test using function construction based on matrix operation is proposed, which is not only used for the solution of radial deviation (F) but also should be applied to obtain two other evaluation parameters especially circular hysteresis (H). Furthermore, an improved optical configuration with a single laser is presented based on a 2D laser heterodyne interferometer. Compared with the existed non-contact method, it has a more pure homogeneity of the laser sources of 2D displacement sensing for advanced metrology. The algorithm and modeling are both illustrated. And error budget is also achieved. At last, to validate them, test experiments for motion paths are implemented based on a gantry machining center. Contrast test results support the proposal.

  10. Assessing the influence of biofilm surface roughness on mass transfer by combining optical coherence tomography and two-dimensional modeling.

    Science.gov (United States)

    Li, Chunyan; Wagner, Michael; Lackner, Susanne; Horn, Harald

    2016-05-01

    Imaging and modeling are two major approaches in biofilm research to understand the physical and biochemical processes involved in biofilm development. However, they are often used separately. In this study we combined these two approaches to investigate substrate mass transfer and mass flux. Cross-sectional biofilm images were acquired by means of optical coherence tomography (OCT) for biofilms grown on carriers. A 2D biofilm model was developed incorporating OCT images as well as a simplified biofilm geometry serving as structural templates. The model incorporated fluid flow, substrate transfer and biochemical conversion of substrates and simulated the hydrodynamics surrounding the biofilm structure as well as the substrate distribution. The method allowed detailed analysis of the hydrodynamics and mass transfer characteristics at the micro-scale. Biofilm activity with respect to substrate fluxes was compared among different combinations of flow, substrate availability and biomass density. The combined approach revealed that higher substrate fluxes at heterogeneous biofilm surface under two conditions: pure diffusion and when high flow velocity along the biofilms surface renders the whole liquid-biofilm interface to be highly active. In-between the two conditions the substrate fluxes across the surface of smooth biofilm geometry were higher than that of the heterogeneous biofilms.

  11. Analysis of a digital microstrip optical switch: a novel method

    Science.gov (United States)

    Al-Ruwaihi, Khalid M.; Hindy, Moataza A.

    1997-02-01

    A time domain analysis of an optically controlled digital microstrip switch for microwave integrated circuits on Si substrates is studied. A new model for high-frequency pulse propagation on a microstrip optical switch for different optical parameters is presented. A frequency-dependent macromodel for a microstrip line with a gap is implemented in Spice 3, taking into consideration high-frequency pulse dispersion, conductor and dielectric losses, metallization thickness, gap length, and different optical parameters such as optical energy, surface recombination velocities, and diffusion of generated carriers. In addition, the developed model has been used to optimize the switching frequency, gap length, level of optical power, and suitable substrate material parameters.

  12. Analysis of a digital microstrip optical switch: a novel method.

    Science.gov (United States)

    Al-Ruwaihi, K M; Hindy, M A

    1997-02-20

    A time domain analysis of an optically controlled digital microstrip switch for microwave integrated circuits on Si substrates is studied. A new model for high-frequency pulse propagation on a microstrip optical switch for different optical parameters is presented. A frequency-dependent macromodel for a microstrip line with a gap is implemented in Spice 3, taking into consideration high-frequency pulse dispersion, conductor and dielectric losses, metallization thickness, gap length, and different optical parameters such as optical energy, surface recombination velocities, and diffusion of generated carriers. In addition, the developed model has been used to optimize the switching frequency, gap length, level of optical power, and suitable substrate material parameters.

  13. Performance analysis of a scalable optical packet switching architecture

    Science.gov (United States)

    Wu, Ho-Ting; Tuan, Chia-Wei

    2010-10-01

    We carry out the analysis of a scalable switching architecture for all-optical packet switching networks. The underlying switch is based on a 2×2 two-stage multibuffer switched delay-line-based optical switching node. By incorporating an additional bypass line and employing a novel switch control strategy, the optical packet switching node can effectively resolve packet contentions, thus reducing the packet deflection probability substantially. In this work, we develop an exact queueing model from a discrete time Markov chain (DTMC) to evaluate the system performance under bursty, nonbursty, symmetric, and asymmetric traffic conditions. The accurate deflection probability and mean packet delay are obtained from this analytical model. Furthermore, we derive an approximate analysis to calculate the lower bound of deflection probability without the heavy computational complexities incurred by the exact analytical model. Simulation results are performed to confirm the validity of our analytic models.

  14. Bidirectional all-optical switches based on highly nonlinear optical fibers

    Science.gov (United States)

    Liu, Wenjun; Yang, Chunyu; Liu, Mengli; Yu, Weitian; Zhang, Yujia; Lei, Ming; Wei, Zhiyi

    2017-05-01

    All-optical switches have become one of the research focuses of nonlinear optics due to their fast switching speed. They have been applied in such fields as ultrafast optics, all-optical communication and all-optical networks. In this paper, based on symbolic computation, bidirectional all-optical switches are presented using analytic two-soliton solutions. Various types of soliton interactions are analyzed through choosing the different parameters of high-order dispersion and nonlinearity. Results indicate that bidirectional all-optical switches can be effectively achieved using highly nonlinear optical fibers.

  15. Variable time-period optical switching: a novel OBS implementation

    Institute of Scientific and Technical Information of China (English)

    Jinsong Zhang(张劲松); Mingcui Cao(曹明翠); Fengguang Luo(罗风光); Tao Chen(陈涛)

    2003-01-01

    In this paper, we proposed a novel optical switching method based on optical burst switching (OBS), we call it variable time-period optical switching (VTPOS). It can both support circuit services and other immerged packet services. It has better usability of bandwidth, shorter offset and latency time than others of unidirectional transport signaling mechanisms for OBS. It supports deflection switching for improve blocking performance without the need of schedule buffer. It introduces a time pointer and phase indicator that made synchronous more precisely and requires less guard time, it also classifies the different services classes with a relative QoS model.

  16. Design of multimode interference optical switches with area modulation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the self-imaging effect, multimode interference (MMI) optical switches with area modulation were proposed. The field transfer matrix was introduced to analyze the MMI switches. As an example, the phase modulation parameters of a 3 × 3 MMI switch for different switching cases were obtained by solving the field transfer equation. And the finite-difference beam propagation method (FD-BPM) was used to confirm the analytical results.

  17. Two-dimensional function photonic crystals

    Science.gov (United States)

    Liu, Xiao-Jing; Liang, Yu; Ma, Ji; Zhang, Si-Qi; Li, Hong; Wu, Xiang-Yao; Wu, Yi-Heng

    2017-01-01

    In this paper, we have studied two-dimensional function photonic crystals, in which the dielectric constants of medium columns are the functions of space coordinates , that can become true easily by electro-optical effect and optical kerr effect. We calculated the band gap structures of TE and TM waves, and found the TE (TM) wave band gaps of function photonic crystals are wider (narrower) than the conventional photonic crystals. For the two-dimensional function photonic crystals, when the dielectric constant functions change, the band gaps numbers, width and position should be changed, and the band gap structures of two-dimensional function photonic crystals can be adjusted flexibly, the needed band gap structures can be designed by the two-dimensional function photonic crystals, and it can be of help to design optical devices.

  18. Electronic structure and optical properties of the single crystal and two-dimensional structure of CdWO{sub 4} from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Babamoradi, Mohsen, E-mail: babamoradi@iust.ac.ir [Department of Physics, Iran University of Science and Technology, Narmak, 16846-13114 Tehran (Iran, Islamic Republic of); Liyai, Mohammad Reza [Department of Physics, Iran University of Science and Technology, Narmak, 16846-13114 Tehran (Iran, Islamic Republic of); Azimirad, Rouhollah, E-mail: azimirad@yahoo.com [Malek-Ashtar University of Technology, Tehran (Iran, Islamic Republic of); Salehi, Hamdollah, E-mail: salehi_h@scu.ac.ir [Department of Physics, Faculty of Science, Shahid Chamran University of Ahvaz, Ahvaz (Iran, Islamic Republic of)

    2017-04-15

    In this paper, we have investigated the electronic structure and optical properties of the single crystal and two-dimensional (2D) structure of cadmium tungstate (CdWO{sub 4}). This investigation includes calculation of the density of states (DOS), dielectric tensor elements and reflectivity. All the calculations have been done by full potential augmented plane waves plus local orbitals (FP-APW+lo) with Wien2k code. The calculated band gaps for the single crystal and 2D structure along [010] direction are 4.2 and 5.02 eV, respectively. The results show that in the 2D structure of CdWO{sub 4}, the electron density of the surface oxygen atoms is much more than the electron density of the inside oxygen atoms. This difference in the density has the main role in the optical properties. The results of the dielectric tensor elements and reflectivity for the single crystal are in good agreement with the experimental values. The results of the dielectric tensor elements and reflectivity for the 2D structure in comparison with the single crystal have shown that the intensity and place of the calculated peaks reduced and shifted, respectively. These results can be related to the surface oxygen atoms and thickness of the 2D structure.

  19. Superconductivity in the two-dimensional electron gas induced by high-energy optical phonon mode and large polarization of the SrTiO3 substrate

    Science.gov (United States)

    Rosenstein, Baruch; Shapiro, B. Ya.; Shapiro, I.; Li, Dingping

    2016-07-01

    Pairing in one-atomic-layer-thick two-dimensional electron gas (2DEG) by a single flat band of high-energy longitudinal optical phonons is considered. The polar dielectric SrTiO3 (STO) exhibits such an energetic phonon mode and the 2DEG is created both when one unit cell FeSe layer is grown on its (100 ) surface and on the interface with another dielectric like LaAlO3 (LAO). We obtain a quantitative description of both systems solving the gap equation for Tc for arbitrary Fermi energy ɛF, electron-phonon coupling λ , and the phonon frequency Ω , and direct (random-phase approximation) electron-electron repulsion strength α . The focus is on the intermediate region between the adiabatic, ɛF>>Ω , and the nonadiabatic, ɛF<<Ω , regimes. The high-temperature superconductivity in single-unit-cell FeSe/STO is possible due to a combination of three factors: high-longitudinal-optical phonon frequency, large electron-phonon coupling λ ˜0.5 , and huge dielectric constant of the substrate suppression the Coulomb repulsion. It is shown that very low density electron gas in the interfaces is still capable of generating superconductivity of the order of 0.1 K in LAO/STO.

  20. Enhanced trapping of colding lithium by using the multiple-sideband cooling in a two-dimensional magneto-optical trap

    CERN Document Server

    Li, Kai; Gao, Tianyou; Peng, Shi-Guo; Jiang, Kaijun

    2015-01-01

    Trapping lithium with a big number in a simplified experimental setup has difficulties and challenges today. In this paper, we experimentally demonstrate the enhancement of \\textsuperscript{6}Li trapping efficiency in a three-dimensional magneto-optical trap (3D MOT) by using the multiple-sideband cooling in a two-dimensional magneto-optical trap (2D MOT). To improve the number of trapped atoms, we broaden the cooling light spectrum to 102 MHz composed of seven frequency components and then trap atoms with a number of $6.0\\times10^8$ which is about 4 times compared to that in the single-frequency cooling. The capture velocity and dependence of atomic number on the laser detuning have been analyzed, where the experimental result has a good agreement with the theoretical prediction based on a simple two-level model. We also analyze the loss rate of alkali metals due to fine-structure exchanging collisions and find that the multiple-sideband cooling is special valid for lithium.

  1. Carrier dynamics of optical emission from two-dimensional electron gas in undoped AlGaN/GaN single heterojunctions

    Energy Technology Data Exchange (ETDEWEB)

    Kwack, H.S.; Cho, Y.H. [Department of Physics and Institute for Basic Science Research, Chungbuk National University, Cheongju 361-763 (Korea); Kim, G.H. [School of Information and Communication Engineering, Sungkyunkwan University, Suwon 440-746 (Korea); Park, M.R.; Youn, D.H.; Bae, S.B.; Lee, K.S. [Basic Research Laboratory, Electronics and Telecommunications Research Institute, Daejeon 305-350 (Korea); Lee, J.H.; Lee, J.H. [Department of Electric and Electronic Engineering, Kyungpook National University, Taegu 702-701 (Korea)

    2006-06-15

    The structural and optical properties of undoped AlGaN/GaN single heterojunctions (HJs) were studied by means of high-resolution x-ray diffraction, photoluminescence (PL), cathodoluminescence (CL), and time-resolved PL spectroscopy. An additional two-dimensional electron gas (2DEG)-related PL and CL emission appeared at about 40 meV below the GaN band-edge emission energy and persisted up to about 100 K, while this peak disappeared when the top AlGaN layer was removed by reactive ion etching. Depth-resolved CL spectra reveal the presence of a 2DEG at the heterointerface. The additional PL and CL emission below the GaN band-edge emission is attributed to the recombination between photogenerated holes and electrons confined at 2DEG states in the triangular-shaped interface potential. For the 2DEG emission, we observed an about 50-ps delayed rise time than the GaN and AlGaN emissions by using time-resolved PL, indicating effective carrier transfer from the GaN flatband and AlGaN regions to the heterointerface. From the results, we explained the optical properties and carrier recombination dynamics of 2DEG, GaN, and AlGaN emissions in undoped AlGaN/GaN single HJs. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  2. Carrier dynamics of optical emission from two-dimensional electron gas in undoped AlGaN/GaN single heterojunctions

    Science.gov (United States)

    Kwack, H. S.; Cho, Y. H.; Kim, G. H.; Park, M. R.; Youn, D. H.; Bae, S. B.; Lee, K.-S.; Lee, J. H.; Lee, J. H.

    2006-06-01

    The strucutral and optical properties of undoped AlGaN/GaN single heterojunctions (HJs) were studied by means of high-resolution x-ray diffraction, photoluminescence (PL), cathodoluminescence (CL), and time-resolved PL spectroscopy. An additional two-dimensional electron gas (2DEG)-related PL and CL emission appeared at about 40 meV below the GaN band-edge emission energy and persisted up to about 100 K, while this peak disappeared when the top AlGaN layer was removed by reactive ion etching. Depth-resolved CL spectra reveal the presence of a 2DEG at the heterointerface. The additional PL and CL emission below the GaN band-edge emission is attributed to the recombination between photogenerated holes and electrons confined at 2DEG states in the triangular-shaped interface potential. For the 2DEG emission, we observed an about 50-ps delayed rise time than the GaN and AlGaN emissions by using time-resolved PL, indicating effective carrier transfer from the GaN flatband and AlGaN regions to the heterointerface. From the results, we explained the optical properties and carrier recombination dynamics of 2DEG, GaN, and AlGaN emissions in undoped AlGaN/GaN single HJs.

  3. Two-dimensional calculus

    CERN Document Server

    Osserman, Robert

    2011-01-01

    The basic component of several-variable calculus, two-dimensional calculus is vital to mastery of the broader field. This extensive treatment of the subject offers the advantage of a thorough integration of linear algebra and materials, which aids readers in the development of geometric intuition. An introductory chapter presents background information on vectors in the plane, plane curves, and functions of two variables. Subsequent chapters address differentiation, transformations, and integration. Each chapter concludes with problem sets, and answers to selected exercises appear at the end o

  4. Two dimensional vernier

    Science.gov (United States)

    Juday, Richard D. (Inventor)

    1992-01-01

    A two-dimensional vernier scale is disclosed utilizing a cartesian grid on one plate member with a polar grid on an overlying transparent plate member. The polar grid has multiple concentric circles at a fractional spacing of the spacing of the cartesian grid lines. By locating the center of the polar grid on a location on the cartesian grid, interpolation can be made of both the X and Y fractional relationship to the cartesian grid by noting which circles coincide with a cartesian grid line for the X and Y direction.

  5. Left Ventricular Function after Arterial Switch Operation as Assessed by Two-Dimensional Speckle-Tracking Echocardiography in Patients with Simple Transposition of the Great Arteries

    Directory of Open Access Journals (Sweden)

    Elaheh Malakan Rad

    2016-11-01

    Full Text Available Background: The late postoperative course for children with transposition of the great arteries (TGA with an intact ventricular septum (IVS is very important because the coronary arteries may be at risk of damage during arterial switch operation (ASO. We sought to investigate left ventricular function in patients with TGA/IVS by echocardiography.Methods: From March 2011 to December 2012, totally 20 infants (12 males and 8 females with TGA/IVS were evaluated via 2-dimensional speckle-tracking echocardiography (2D STE more than 6 months after they underwent ASO. A control group of age-matched infants and children was also studied. Left ventricular longitudinal strain (S, strain rate (SR, time to peak systolic longitudinal strain (TPS, and time to peak systolic longitudinal strain rate (TPSR were measured and compared between the 2 groups.Results: Mean ± SD of age at the time of study in the patients with TGA/IVS was 15 ± 5 months, and also age at the time of ASO was 12 ± 3 days. Weight was 3.13 ± 0.07 kg at birth and 8.83 ± 1.57 kg at the time of ASO. Global strain (S, Time to peak strain rate (TPSR, and Time to peak strain (TPS were not significantly different between the 2 groups, whereas global strain rate (SR was significantly different (p value < 0.001.  In the 3-chamber view, the values of S in the lateral, septal, inferior, and anteroseptal walls were significantly different between the 2 groups (p value < 0.001, and SR in the posterior wall was significantly different between the 2 groups (p value < 0.001. There were no positive correlations between S and SR in terms of the variables of heart rate, total cardiopulmonary bypass time, and aortic cross-clamp time. There were no statistically significant differences between the 2 groups regarding S, SR, TPS, and TPSR in the anteroseptal and posterior walls in the 3-chamber view and in the lateral and septal walls in the 4-chamber view. Conclusion: We showed that between 6 and 18 months

  6. Quality of service in optical packet switched networks

    CERN Document Server

    Rahbar, Akbar G

    2015-01-01

    This book is a comprehensive study on OPS networks, its architectures, and developed techniques for improving its quality of switching and managing quality of service.  The book includes: Introduction to OPS networks, OOFDM networks, GMPLS-enabled optical networks, QoS in OPS networks Hybrid contention avoidance/resolution schemes in both long-haul and metro optical networks Hybrid optical switching schemes

  7. WE-D-17A-02: Evaluation of a Two-Dimensional Optical Dosimeter On Measuring Lateral Profiles of Proton Pencil Beams

    Energy Technology Data Exchange (ETDEWEB)

    Hsi, W; Lee, T; Schultz, T; Arjomandy, B; Park, S [McLaren Cancer Institute, Flint, MI (United States); Gao, M; Pankuch, M [ProCure Treatment Centers, Warrenville, IL (United States); Boyer, S; Mah, D [Procure Treatment Center, Somerset, NJ (United States); Pillainayagam, M [Wayne State University, Detroit, Michigan (United States); Schreuder, A [Provision Healthcare Partners, Knoxville, TN (United States)

    2014-06-15

    Purpose: To evaluate the accuracy of a two-dimensional optical dosimeter on measuring lateral profiles for spots and scanned fields of proton pencil beams. Methods: A digital camera with a color image senor was utilized to image proton-induced scintillations on Gadolinium-oxysulfide phosphor reflected by a stainless-steel mirror. Intensities of three colors were summed for each pixel with proper spatial-resolution calibration. To benchmark this dosimeter, the field size and penumbra for 100mm square fields of singleenergy pencil-scan protons were measured and compared between this optical dosimeter and an ionization-chamber profiler. Sigma widths of proton spots in air were measured and compared between this dosimeter and a commercial optical dosimeter. Clinical proton beams with ranges between 80 mm and 300 mm at CDH proton center were used for this benchmark. Results: Pixel resolutions vary 1.5% between two perpendicular axes. For a pencil-scan field with 302 mm range, measured field sizes and penumbras between two detection systems agreed to 0.5 mm and 0.3 mm, respectively. Sigma widths agree to 0.3 mm between two optical dosimeters for a proton spot with 158 mm range; having widths of 5.76 mm and 5.92 mm for X and Y axes, respectively. Similar agreements were obtained for others beam ranges. This dosimeter was successfully utilizing on mapping the shapes and sizes of proton spots at the technical acceptance of McLaren proton therapy system. Snow-flake spots seen on images indicated the image sensor having pixels damaged by radiations. Minor variations in intensity between different colors were observed. Conclusions: The accuracy of our dosimeter was in good agreement with other established devices in measuring lateral profiles of pencil-scan fields and proton spots. A precise docking mechanism for camera was designed to keep aligned optical path while replacing damaged image senor. Causes for minor variations between emitted color lights will be investigated.

  8. Applying a new computational method for biological tissue optics based on the time-dependent two-dimensional radiative transfer equation.

    Science.gov (United States)

    Asllanaj, Fatmir; Fumeron, Sebastien

    2012-07-01

    Optical tomography is a medical imaging technique based on light propagation in the near infrared (NIR) part of the spectrum. We present a new way of predicting the short-pulsed NIR light propagation using a time-dependent two-dimensional-global radiative transfer equation in an absorbing and strongly anisotropically scattering medium. A cell-vertex finite-volume method is proposed for the discretization of the spatial domain. The closure relation based on the exponential scheme and linear interpolations was applied for the first time in the context of time-dependent radiative heat transfer problems. Details are given about the application of the original method on unstructured triangular meshes. The angular space (4πSr) is uniformly subdivided into discrete directions and a finite-differences discretization of the time domain is used. Numerical simulations for media with physical properties analogous to healthy and metastatic human liver subjected to a collimated short-pulsed NIR light are presented and discussed. As expected, discrepancies between the two kinds of tissues were found. In particular, the level of light flux was found to be weaker (inside the medium and at boundaries) in the healthy medium than in the metastatic one.

  9. Optical investigation of the quasi-two-dimensional Mott system Ca_2-xSr_xRuO4 (0.0<= x<= 2.0)

    Science.gov (United States)

    Lee, J. S.; Noh, T. W.; Lee, Y. S.; Oh, S.-J.; Nakatsuji, S.; Maeno, Y.

    2002-03-01

    The doping and temperature dependent optical conductivity spectra σ (ω ) in the ab-plane of the quasi-two-dimensional system Ca_2-xSr_xRuO4 (0.0= 0.2, the σ (ω ) show features of the Mott-Hubbard system. However, the insulating spectra of x=0.00 and 0.06 show an unusual two-peak structure around 1.0 and 2.0 eV. From the systematic changes with doping, it was found that both excitations have the correlation-induced Ru 4 d characters. Interestingly, for the x=0.06 sample, softening of the streching phonon mode and strong spectral weight redistribution between these two peaks were observed with decreasing temperature. These could be understood by the orbital occupancy changes with the RuO6 octahedral flattening. Possible connections to the critical behaviors of the specific heat and susceptibility at x=0.5 will be also discussed.

  10. Generation of eye field/optic vesicle-like structures from human embryonic stem cells under two-dimensional and chemically defined conditions.

    Science.gov (United States)

    Parvini, Maryam; Parivar, Kazem; Safari, Fatemeh; Tondar, Mahdi

    2015-03-01

    Despite the enormous progress in studying retinal cell differentiation from human embryonic stem cells (hESCs), none of the reported protocols have produced a cost-effective eye field cells with the capability to further differentiate into retinal derivatives. In this study, by drawing chemicals on our four-step differentiation strategy, we demonstrated the ability of hESCs in assembling such qualifications to follow human retinogenesis in a serum- and feeder-free adherent condition. Two-dimensional (2D) populations of eye field cells arose within early forebrain progeny upon hESCs differentiation. Gene expression analysis showed that the treatment of hESCs with a combination of selected small molecules (SMs) gave rise to the higher expressions of eye field-specific genes, PAX6, RX, and SIX3. Thereafter, a subset of cells gained the transient features of advancing retinal differentiation, including optic vesicle (OV)-like structures, which expressed MITF and CHX10 in a manner imitated in vivo human retinal development. The competency of derived cells in differentiation to retinal derivatives was further investigated. The gene analysis of the cells showed more propensity for generating retinal pigment epithelial (RPE) than neural retina (NR). The generation of OV-like structures in 2D cultures can shed light on molecular events governing retinal specification. It can also facilitate the study of human retinal development.

  11. Synthesis, crystal structure, vibrational spectra, optical properties and theoretical investigation of a two-dimensional self-assembled organic-inorganic hybrid material

    Science.gov (United States)

    Dammak, Hajer; Elleuch, Slim; Feki, Habib; Abid, Younes

    2016-11-01

    Organic-inorganic hybrid material of formula (C4H3SC2H4NH3)2[PbI4] was synthesized and studied by X-ray diffraction, Infrared absorption, Raman scattering, UV-Visible absorption and photoluminescence measurements. The molecule crystallizes as an organic-inorganic two-dimensional (2D) structure built up from infinite PbI6 octahedra surrounded by organic cations. Such a structure may be regarded as quantum wells system in which the inorganic layers act as semiconductor wells and the organic cations act as insulator barriers. Room temperature IR and Raman spectra were recorded in the 520-3500 and 10-3500 cm-1 frequency range, respectively. Optical absorption measurements performed on thin films of (C4H3SC2H4NH3)2[PbI4] revealed three distinct bands at 2.4, 2.66 and 3.25 eV. We also report DFT calculations of the electric dipole moments (μ), polarizability (α), the static first hyperpolarizability (β) and HOMO-LUMO analysis of the title compound investigated by GAUSSIAN 09 package. The calculated static first Hyperpolarizability is equal to 11.46 × 10-31 esu.

  12. SU-E-CAMPUS-T-04: Measurement of Proton Pencil Beam Spot Profile Using Cherenkov Radiation in Two Dimensional Optical Fiber Arrays

    Energy Technology Data Exchange (ETDEWEB)

    Kim, M; SHIN, D; Park, J; Lim, Y; Lee, S; Kim, J [National Cancer Center, Goyang, Gyeonggi-do (Korea, Republic of); Son, J [National Cancer Center, Goyang, Gyeonggi-do, Korea University, Seoul, Gyeonggi-do (Korea, Republic of); Hwang, U [National Medical Center in Korea, Seoul (Korea, Republic of)

    2014-06-15

    Purpose: Proton therapy aims to deliver a high dose in a well-defined target volume while sparing the healthy surrounding tissues thanks to their inherent depth dose characteristic (Bragg peak). In proton therapy, several techniques can be used to deliver the dose into the target volume. The one that allows the best conformity with the tumor, is called PBS (Pencil Beam Scanning). The measurement of the proton pencil beam spot profile (spot size) and position is very important for the accurate delivery of dose to the target volume with a good conformity. Methods: We have developed a fine segmented detector array to monitor the PBS. A prototype beam monitor using Cherenkov radiation in clear plastic optical fibers (cPOF) has been developed for continuous display of the pencil beam status during the therapeutic proton Pencil Beam Scanning mode operation. The benefit of using Cherenkov radiation is that the optical output is linear to the dose. Pedestal substraction and the gain adjustment between channels are performed. Spot profiles of various pencil beam energies(100 MeV to 226 MeV) are measured. Two dimensional gaussian fit is used to analyze the beam width and the spot center. The results are compared with that of Lynx(Scintillator-based sensor with CCD camera) and EBT3 Film. Results: The measured gaussian widths using fiber array system changes from 13 to 5 mm for the beam energies from 100 to 226 MeV. The results agree well with Lynx and Film within the systematic error. Conclusion: The results demonstrate good monitoring capability of the system. Not only measuing the spot profile but also monitoring dose map by accumulating each spot measurement is available. The x-y monitoing system with 128 channel readout will be mounted to the snout for the in-situ real time monitoring.

  13. Novel polarization diversity without switch duplication of a Si-wire PILOSS optical switch.

    Science.gov (United States)

    Tanizawa, Ken; Suzuki, Keijiro; Ikeda, Kazuhiro; Namiki, Shu; Kawashima, Hitoshi

    2016-04-04

    We demonstrate the compact polarization diversity based on the bidirectional full-port use of a path-independent-insertion-loss (PILOSS) optical switch. A polarization-diversity 4 × 4 strictly non-blocking optical switch is developed using a single thermooptic PILOSS Si-wire switch and fiber-based polarization beam splitters (PBSs) and combiners (PBCs). We measure characteristics of the switch and confirm that the proposed configuration demonstrates the performance in the insertion loss, polarization-dependent loss (PDL), and differential group delay (DGD) comparable with that of a conventional polarization-diversity 4 × 4 PILOSS switch using double switch elements. On the other hand, higher crosstalk is observed. The crosstalk increase is associated with the backward crosstalk at a waveguide intersection based on a directional coupler. The effect of the backward crosstalk on the total crosstalk is estimated, and future prospects are discussed.

  14. DESIGN OF AN ARRAYED WAVEGUIDE GRATINGS BASED OPTICAL PACKET SWITCH

    Directory of Open Access Journals (Sweden)

    VAIBHAV SHUKLA

    2016-12-01

    Full Text Available Optical packet switching is considered as the future of data transfer technologyin combination with middle-aged electronics. The biggest challenge encountered in optical packet switching is the lack of optical buffers for storing the contending packets. Therefore, for the contention resolution of packets, a temporary storage in terms of fiber delay lines is used. This task is accomplished by an optical packet switch. In this paper, a design modification in the AWGR (Arrayed Waveguide Grating Router is presented for improving the switch performance. The power budget analysis of the switch is also presented to estimate the sufficient power level of the switch. The obtained results clearly reveal that the architecture presented in this paper can be operated in micro-watts in comparison to the earlier optical switch which operates in milli watts regime. Finally, simulation results are presented to obtain packet loss probability and average delay. Even at the higher load of 0.6, the switch presented in this paper provides a very low loss probability (10^6 and delay remain within 2 slots.

  15. Techniques for labeling of optical signals in bust switched networks

    DEFF Research Database (Denmark)

    Tafur Monroy, Idelfonso; Koonen, A. M. J.; Zhang, Jianfeng

    2003-01-01

    multiplexed (WDM) networks due to its single forwarding algorithm, thus yielding low latency, and it enables scaling to terabit rates. Moreover, LOBS is compatible with the general multiprotocol label switching (GMPLS) framework for a unified control plane. We present a review on techniques for labeling......We present a review of significant issues related to labeled optical burst switched (LOBS) networks and technologies enabling future optical internet networks. Labeled optical burst switching provides a quick and efficient forwarding mechanism of IP packets/bursts over wavelength division...

  16. An optical fan for light beams for high-precision optical measurements and optical switching

    CERN Document Server

    Zhou, Zhi-Yuan; Ding, Dong-Sheng; Jiang, Yun-Kun; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen; Guo, Guang-Can

    2014-01-01

    The polarization and orbital angular momentum properties of light are of great importance in optical science and technology in the fields of high precision optical measurements and high capacity and high speed optical communications. Here we show, a totally new method, based on a combination of these two properties and using the thermal dispersion and electro-optical effect of birefringent crystals, the construction of a simple and robust scheme to rotate a light beam like a fan. Using a computer-based digital image processing technique, we determine the temperature and the thermal dispersion difference of the crystal with high resolution. We also use the rotation phenomenon to realize thermo-optic and electro-optic switches. The basic operating principles for measurement and switching processes are presented in detail. The methods developed here will have wide practical applicability in various fields, including remote sensing, materials science and optical communication networks.

  17. High-pressure crystal structure of the non-linear optical compound BiB(3)O(6) from two-dimensional powder diffraction data.

    Science.gov (United States)

    Dinnebier, R E; Hinrichsen, B; Lennie, A; Jansen, M

    2009-02-01

    Our recently proposed method for automatic detection, calibration and evaluation of Debye-Scherrer ellipses using pattern-recognition techniques and advanced signal filtering was applied to the two-dimensional powder diffraction data of the non-ferroelectric, non-centrosymmetric non-linear optical (NLO) compound alpha-BiB(3)O(6) as a function of pressure. At ambient conditions, alpha-BiB(3)O(6) crystallizes in the space group C2 (phase I). In the pressure range between P = 6.09 and 6.86 GPa, it exhibits a first-order phase transition into a structure with the space group C1 (P1) [phase II at P = 8.34 GPa: a = 7.4781 (6), b = 3.9340 (4), c = 6.2321 (6) A, alpha = 93.73 (1), beta = 102.93 (1), gamma = 90.76 (1) degrees , and V = 178.24 (3) A(3)]. Non-linear compression behaviour over the entire pressure range is observed, which can be described by two Vinet relations in the ranges from P = 0.0 to 6.09 GPa, and from P = 6.86 to 11.6 GPa. The extrapolated bulk moduli of the high-pressure phases were determined to be K(0) = 38 (1) GPa for phase I, and K(0) = 114 (10) GPa for phase II. The crystal structures of both phases were refined against X-ray powder diffraction data measured at several pressures between 0.0 and 11.6 GPa. The structural phase transition of alpha-BiB(3)O(6) is mainly characterized by a reorientation of the [BO(3)](3-) triangles, the [BO(4)](5-) tetrahedra and the lone electron pair which is localized at Bi(3+), in order to optimize crystal packing.

  18. Automated classification of single airborne particles from two-dimensional angle-resolved optical scattering (TAOS) patterns by non-linear filtering

    Science.gov (United States)

    Crosta, Giovanni Franco; Pan, Yong-Le; Aptowicz, Kevin B.; Casati, Caterina; Pinnick, Ronald G.; Chang, Richard K.; Videen, Gorden W.

    2013-12-01

    Measurement of two-dimensional angle-resolved optical scattering (TAOS) patterns is an attractive technique for detecting and characterizing micron-sized airborne particles. In general, the interpretation of these patterns and the retrieval of the particle refractive index, shape or size alone, are difficult problems. By reformulating the problem in statistical learning terms, a solution is proposed herewith: rather than identifying airborne particles from their scattering patterns, TAOS patterns themselves are classified through a learning machine, where feature extraction interacts with multivariate statistical analysis. Feature extraction relies on spectrum enhancement, which includes the discrete cosine FOURIER transform and non-linear operations. Multivariate statistical analysis includes computation of the principal components and supervised training, based on the maximization of a suitable figure of merit. All algorithms have been combined together to analyze TAOS patterns, organize feature vectors, design classification experiments, carry out supervised training, assign unknown patterns to classes, and fuse information from different training and recognition experiments. The algorithms have been tested on a data set with more than 3000 TAOS patterns. The parameters that control the algorithms at different stages have been allowed to vary within suitable bounds and are optimized to some extent. Classification has been targeted at discriminating aerosolized Bacillus subtilis particles, a simulant of anthrax, from atmospheric aerosol particles and interfering particles, like diesel soot. By assuming that all training and recognition patterns come from the respective reference materials only, the most satisfactory classification result corresponds to 20% false negatives from B. subtilis particles and classification method may be adapted into a real-time operation technique, capable of detecting and characterizing micron-sized airborne particles.

  19. Two-dimensional gain cross-grating based on spatial modulation of active Raman gain

    Science.gov (United States)

    Wang, Li; Zhou, Feng-Xue; Guo, Hong-Ju; Niu, Yue-Ping; Gong, Shang-Qing

    2016-11-01

    Based on the spatial modulation of active Raman gain, a two-dimensional gain cross-grating is theoretically proposed. As the probe field propagates along the z direction and passes through the intersectant region of the two orthogonal standing-wave fields in the x-y plane, it can be effectively diffracted into the high-order directions, and the zero-order diffraction intensity is amplified at the same time. In comparison with the two-dimensional electromagnetically induced cross-grating based on electromagnetically induced transparency, the two-dimensional gain cross-grating has much higher diffraction intensities in the first-order and the high-order directions. Hence, it is more suitable to be utilized as all-optical switching and routing in optical networking and communication. Project supported by the National Natural Science Foundation of China (Grant Nos. 11274112 and 11347133).

  20. Performance improvement for optical packet switch with shared buffers

    Institute of Scientific and Technical Information of China (English)

    Junjie Yang; Qingji Zeng; Jie Li; Tong Ye; Guolong Zhu

    2005-01-01

    @@ In this paper, an inner wavelength method is proposed to enlarge buffering capacity of shared fiber delay line buffers. In addition, an optical packet switch called extended shared buffer type optical packet switch(extended SB-OPS) is proposed to realize the inner wavelength method. In order to further improve performance of extended SB-OPS, a greedy algorithm based on inner wavelength method is introduced.The performance of extended SB-OPS is evaluated by simulation experiments.

  1. Architectures of electro-optical packet switched networks

    DEFF Research Database (Denmark)

    Berger, Michael Stubert

    2004-01-01

    and examines possible architectures for future high capacity networks with high capacity nodes. It is assumed that optics will play a key role in this scenario, and in this respect, the European IST research project DAVID aimed at proposing viable architectures for optical packet switching, exploiting the best......, Constraint Based Routing is examined, and the effect from taking the link load into account is evaluated. It is believed that electrical packet switching will satisfy demands in the coming years, and this work covers several aspects hereof. A new load balancing scheme for multipath packet switches...

  2. Potential roles of optical interconnections within broadband switching modules

    Science.gov (United States)

    Lalk, Gail R.; Habiby, Sarry F.; Hartman, Davis H.; Krchnavek, Robert R.; Wilson, Donald K.; Young, Kenneth C., Jr.

    1991-04-01

    An investigation of potential physical design bottlenecks in future broadband telecommunication switches has led to the identification of several areas where optical interconnections may play a role in the practical realization of required system performance. In the model used the speed and interconnection densities as well as requirements for ease-of-access and efficient power utilization challenge conventional partitioning and packaging strategies. Potential areas where optical interconnections may relieve some of the physical design bottlenecks include fiber management at the customer interface to the switch routing and distribution of high-density interconnections within the fabric of the switch and backplane interconnections to increase system throughput.

  3. Optical cross-connect circuit using hitless wavelength selective switch.

    Science.gov (United States)

    Goebuchi, Yuta; Hisada, Masahiko; Kato, Tomoyuki; Kokubun, Yasuo

    2008-01-21

    We have proposed and demonstrated the basic elements of a full matrix optical switching circuit (cross-connect circuit) using a hitless wavelength selective switch (WSS). The cross-connect circuits are made of a multi-wavelength channel selective switch consisting of cascaded hitless WSSs, and a multi-port switch. These switching elements are realized through the individual Thermo-Optic (TO) tuning of a series-coupled microring resonator, and can switch arbitrary wavelength channels without blocking other wavelength channels during tuning. We demonstrate a four wavelength selective switch using a parallel topology of double series coupled microring resonators and a three wavelength selective switch using a parallel topology of quadruple series coupled microring resonators. Since the spectrum shape of quadruple series coupled microring is much more box-like than the double series, a high extinction ratio of 39.0-46.6 dB and low switching cross talk of 19.3-24.5 dB were achieved.

  4. All-optical high performance graphene-photonic crystal switch

    Science.gov (United States)

    Hoseini, Mehrdad; Malekmohammad, Mohammad

    2017-01-01

    The all-optical switch is realized based on nonlinear transmission changes in Fano resonance of 2D photonic crystals (PhC) which enhances the light intensity on the graphene in PhC; and in this study, the graphene layer is used as the nonlinear material. The refractive index change of graphene layer leads to a shift in the Fano resonance frequency due to the input light intensity through the Kerr nonlinear effect. Through finite-difference time-domain simulation, it is found that the high performance of all-optical switching can be achieved by the designed structure with a threshold pump intensity as low as MW/cm2. This structure is featured by optical bistability. The obtained results are applicable in micro optical integrated circuits for modulators, switches and logic elements for optical computation.

  5. Demonstration of all-optical MDM/WDM switching for short-reach networks.

    Science.gov (United States)

    Wu, Zhongying; Li, Juhao; Ge, Dawei; Ren, Fang; Zhu, Paikun; Mo, Qi; Li, Zhengbin; Chen, Zhangyuan; He, Yongqi

    2016-09-19

    Mode division multiplexing (MDM) has been widely investigated in optical transmission systems and networks to improve network capacity. However, the MDM receiver is always expensive and complex because coherent detection and multiplex-input-and-multiplex-output (MIMO) digital signal processing (DSP) are required to demultiplex each spatial mode. In this paper, we investigate the application of MDM in short-reach scenarios such as datacenter networking. Two-dimensional MDM and wavelength division multiplexing node structure based on low modal-crosstalk few-mode fiber (FMF) and components is proposed, in which signal in each mode or wavelength can be independently switched. We experimentally demonstrate independent adding, dropping and switching functionalities with two linearly polarized modes and four wavelength channels over a total 11.8-km 2-mode low modal-crosstalk FMFs. The structure is simple without coherent detection or MIMO DSP. Only slight penalties of receiver sensitivity are observed for all switching operations. The influence of modal-crosstalk accumulation for cascaded switching nodes is also investigated.

  6. Titanium Oxide Intelligent "Optical Switch" Surface

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Bio-mimic\tsuper-hydrophobic\tand super-hydrophilic switches were highly concerned because of their extensive application perspectives in gene transfers,non-loss liquid transportation,micro fluid,gene chips,and slow released drug.

  7. Advanced Optical Burst Switched Network Concepts

    Science.gov (United States)

    Nejabati, Reza; Aracil, Javier; Castoldi, Piero; de Leenheer, Marc; Simeonidou, Dimitra; Valcarenghi, Luca; Zervas, Georgios; Wu, Jian

    In recent years, as the bandwidth and the speed of networks have increased significantly, a new generation of network-based applications using the concept of distributed computing and collaborative services is emerging (e.g., Grid computing applications). The use of the available fiber and DWDM infrastructure for these applications is a logical choice offering huge amounts of cheap bandwidth and ensuring global reach of computing resources [230]. Currently, there is a great deal of interest in deploying optical circuit (wavelength) switched network infrastructure for distributed computing applications that require long-lived wavelength paths and address the specific needs of a small number of well-known users. Typical users are particle physicists who, due to their international collaborations and experiments, generate enormous amounts of data (Petabytes per year). These users require a network infrastructures that can support processing and analysis of large datasets through globally distributed computing resources [230]. However, providing wavelength granularity bandwidth services is not an efficient and scalable solution for applications and services that address a wider base of user communities with different traffic profiles and connectivity requirements. Examples of such applications may be: scientific collaboration in smaller scale (e.g., bioinformatics, environmental research), distributed virtual laboratories (e.g., remote instrumentation), e-health, national security and defense, personalized learning environments and digital libraries, evolving broadband user services (i.e., high resolution home video editing, real-time rendering, high definition interactive TV). As a specific example, in e-health services and in particular mammography applications due to the size and quantity of images produced by remote mammography, stringent network requirements are necessary. Initial calculations have shown that for 100 patients to be screened remotely, the network

  8. Ultrafast optical switching in three-dimensional photonic crystals

    NARCIS (Netherlands)

    Mazurenko, D.A.

    2004-01-01

    The rapidly expanding research on photonic crystals is driven by potential applications in all-optical switches, optical computers, low-threshold lasers, and holographic data storage. The performance of such devices might surpass the speed of traditional electronics by several orders of magnitude an

  9. Ultrafast optical switching in three-dimensional photonic crystals

    NARCIS (Netherlands)

    Mazurenko, D.A.

    2004-01-01

    The rapidly expanding research on photonic crystals is driven by potential applications in all-optical switches, optical computers, low-threshold lasers, and holographic data storage. The performance of such devices might surpass the speed of traditional electronics by several orders of magnitude

  10. Crossbar Switches For Optical Data-Communication Networks

    Science.gov (United States)

    Monacos, Steve P.

    1994-01-01

    Optoelectronic and electro-optical crossbar switches called "permutation engines" (PE's) developed to route packets of data through fiber-optic communication networks. Basic network concept described in "High-Speed Optical Wide-Area Data-Communication Network" (NPO-18983). Nonblocking operation achieved by decentralized switching and control scheme. Each packet routed up or down in each column of this 5-input/5-output permutation engine. Routing algorithm ensures each packet arrives at its designated output port without blocking any other packet that does not contend for same output port.

  11. Crossbar Switches For Optical Data-Communication Networks

    Science.gov (United States)

    Monacos, Steve P.

    1994-01-01

    Optoelectronic and electro-optical crossbar switches called "permutation engines" (PE's) developed to route packets of data through fiber-optic communication networks. Basic network concept described in "High-Speed Optical Wide-Area Data-Communication Network" (NPO-18983). Nonblocking operation achieved by decentralized switching and control scheme. Each packet routed up or down in each column of this 5-input/5-output permutation engine. Routing algorithm ensures each packet arrives at its designated output port without blocking any other packet that does not contend for same output port.

  12. Optical computation based on nonlinear total reflectional optical switch at the interface

    Indian Academy of Sciences (India)

    Jianqi Zhang; Huan Xu

    2009-03-01

    A new scheme of binary half adder and full adder is proposed. It realizes a kind of all-optical computation which is based on the polarization coding technique and the nonlinear total reflectional optical switches.

  13. Design and performance of the beamlet optical switch

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, M.A.; Woods, B.W.; DeYoreo, J.J. [and others

    1996-06-01

    High-energy lasers for Inertial Confinement Fusion (ICF) experiments are typically designed with large apertures (>30 cm) to keep the fluence below the damage threshold of the various optical components. Until recently, no optical switch technology could be scaled to the aperture size, aperture shape (square), and switching speed required for the next generation of ICF drivers. This step is critical: The Beamlet multipass amplifier cavity uses a full-aperture optical switch to trap the laser pulse within the cavity and to divert the pulse out of the cavity when it reaches the required energy. By rotating the polarization of the beam, a Pockels cell in the switch controls whether the beam is transmitted through, or reflected from, the polarizer. In this article the authors describe an optical switch technology that does scale to the required aperture size and shape for Beamlet and the porposed National Ignition Facility (NIF) laser, and can employ a thin crystal. This switch consists of a thin-film polarizer and a plasma-electrode Pockels cell (PEPC), the latter originally invented at Lawrence Livermore National Laboratory (LLNL) in the 1980s and under further development since 1991. After discussing the PEPC concept, they present the design and optical performance of a 32 x 32 cm{sup 2} prototype PEPC, including discussions of the crystals, the PEPC assembly, the vacuum and gas system, and the high-voltage pulsers. Then they describe the performance of the 37 x 37 cm{sup 2} PEPC construced specifically for the Beamlet laser. Finally, they discuss important technology issues that arose during PEPC development: cathode sputtering, cathode heating, nonuniformities in the switching profile, switch-pulse leakage current, and an estimate of the plasma density and temperature produced during PEPC operation.

  14. Experimental demonstration of tunable multiple optical orthogonal codes sequences-based optical label for optical packets switching

    Science.gov (United States)

    Zhang, Chongfu; Qiu, Kun; Zhou, Heng; Ling, Yun; Wang, Yawei; Xu, Bo

    2010-03-01

    In this paper, the tunable multiple optical orthogonal codes sequences (MOOCS)-based optical label for optical packet switching (OPS) (MOOCS-OPS) is experimentally demonstrated for the first time. The tunable MOOCS-based optical label is performed by using fiber Bragg grating (FBG)-based optical en/decoders group and optical switches configured by using Field Programmable Gate Array (FPGA), and the optical label is erased by using Semiconductor Optical Amplifier (SOA). Some waveforms of the MOOCS-based optical label, optical packet including the MOOCS-based optical label and the payloads are obtained, the switching control mechanism and the switching matrix are discussed, the bit error rate (BER) performance of this system is also studied. These experimental results show that the tunable MOOCS-OPS scheme is effective.

  15. All-Optical Switches in Optical Time-Division Multiplexing Technology: Theory,Experience and Application

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Optical time division multiplexing (OTDM) is one of thepromisinig ways for the future high-speed optical fiber communication networks. All-optical switch is, being one of the core technologies of OTDM systems and networks, crucial to realize the various signal processes including time-division demultiplexing, packet switching, all-optical regenerating and so on. This thesis mainly studies various all-optical switch technologies and their utilization in the fields of all-optical signal processings in the OTDM systems and networks. The main jobs are listed as follows.(1) A novel all-optical ultrafast demultiplexing scheme using the soliton self-trapping effect in birefringent fiber is proposed.(2) The demultiplexing performance of the Nonlinear Optical Loop Mirror(NOLM) is thoroughly analyzed and its optimization is further discussed.(3) The performance analysis and the configuration optimization of the all-optical switches based on the Semiconductor Optical Amplifier(SOA) are systematically presented. The speed limitation of the all-optical SOA switches induced by the fast gain depletion of SOA is discussed. Besides, a novel SOA switch is proposed, which adopts the asymmetric Mach-Zehnder Interferometer configuration.(4) The 8×2\\^5 Gb/s OTDM experimental transmission system along 105 km standard fiber is realized using the NOLM demultiplexer.(5) The NOLM switch is used to realize the all-optical 3R regeneration of 2\\^5 Gb/s Return-to-Zero signal.(6) The feasibility and limitation of the all-optical SOA packet switch is discussed. And a developed MZI configuration of SOA packet switch is further shown to improve the packet switching performance. Finally, an all-optical packet dropping node suitable in the networks with ring or bus configuration and an all-optical packet switching node in the ShuffleNet networks are proposed to show the feasibility of all-optical packet switching through combining the all-optical switches and the reasonable logic decisions.

  16. Magneto-optical switch with amorphous silicon waveguides on magneto-optical garnet

    Science.gov (United States)

    Ishida, Eiichi; Miura, Kengo; Shoji, Yuya; Mizumoto, Tetsuya; Nishiyama, Nobuhiko; Arai, Shigehisa

    2016-08-01

    We fabricated a magneto-optical (MO) switch with a hydrogenated amorphous silicon waveguide on an MO garnet. The switch is composed of a 2 × 2 Mach-Zehnder interferometer (MZI). The switch state is controlled by an MO phase shift through a magnetic field generated by a current flowing in an electrode located on the MZI. The switching operation was successfully demonstrated with an extinction ratio of 11.7 dB at a wavelength of 1550 nm.

  17. Optical Switching in Silicon Nanowaveguide Ring Resonators Based on Kerr Effect and TPA Effect

    Institute of Scientific and Technical Information of China (English)

    LI Chun-Fei; DOU Na

    2009-01-01

    We analyze theoretically the 1 × 2 low-power all-optical switching in silicon nanowaveguide ring resonators (RR) based on the Kerr effect and two-photon absorption (TPA), and give a comparison between both the all-optical switches. The calculation shows that the switching power of the TPA-RR switch is 3 orders smaller than that of the Kerr-RR switch. The switching time for both the switches is about 100ps.

  18. Optical Switching for Dynamic Distribution of Wireless-Over-Fiber Signals in Active Optical Networks

    DEFF Research Database (Denmark)

    Vegas Olmos, Juan José; Rodes, Guillermo; Tafur Monroy, Idelfonso

    2012-01-01

    of a four wavelength-division-multiplexed channel system operating on a WiMax frequency band and employing an orthogonal-frequency-division-multiplexing modulation at 625 Mbits/s per channel, transmission of the data over 20 km of optical fiber, and active switching in a 1 × 16 active optical switch...

  19. High-performance quantitative robust switching control for optical telescopes

    Science.gov (United States)

    Lounsbury, William P.; Garcia-Sanz, Mario

    2014-07-01

    This paper introduces an innovative robust and nonlinear control design methodology for high-performance servosystems in optical telescopes. The dynamics of optical telescopes typically vary according to azimuth and altitude angles, temperature, friction, speed and acceleration, leading to nonlinearities and plant parameter uncertainty. The methodology proposed in this paper combines robust Quantitative Feedback Theory (QFT) techniques with nonlinear switching strategies that achieve simultaneously the best characteristics of a set of very active (fast) robust QFT controllers and very stable (slow) robust QFT controllers. A general dynamic model and a variety of specifications from several different commercially available amateur Newtonian telescopes are used for the controller design as well as the simulation and validation. It is also proven that the nonlinear/switching controller is stable for any switching strategy and switching velocity, according to described frequency conditions based on common quadratic Lyapunov functions (CQLF) and the circle criterion.

  20. Stochastic Pulse Switching in a Degenerate Resonant Optical Medium

    CERN Document Server

    Atkins, Ethan P; Kovacic, Gregor; Gabitov, Ildar R

    2012-01-01

    Using the idealized integrable Maxwell-Bloch model, we describe random optical-pulse polarization switching along an active optical medium in the Lambda-configuration with disordered occupation numbers of its lower energy sub-level pair. The description combines complete integrability and stochastic dynamics. For the single-soliton pulse, we derive the statistics of the electric-field polarization ellipse at a given point along the medium in closed form. If the average initial population difference of the two lower sub-levels vanishes, we show that the pulse polarization will switch intermittently between the two circular polarizations as it travels along the medium. If this difference does not vanish, the pulse will eventually forever remain in the circular polarization determined by which sub-level is more occupied on average. We also derive the exact expressions for the statistics of the polarization-switching dynamics, such as the probability distribution of the distance between two consecutive switches a...

  1. Two-dimensional x-ray diffraction

    CERN Document Server

    He, Bob B

    2009-01-01

    Written by one of the pioneers of 2D X-Ray Diffraction, this useful guide covers the fundamentals, experimental methods and applications of two-dimensional x-ray diffraction, including geometry convention, x-ray source and optics, two-dimensional detectors, diffraction data interpretation, and configurations for various applications, such as phase identification, texture, stress, microstructure analysis, crystallinity, thin film analysis and combinatorial screening. Experimental examples in materials research, pharmaceuticals, and forensics are also given. This presents a key resource to resea

  2. Advances in Anisotropic Materials for Optical Switching

    Science.gov (United States)

    2010-09-16

    overcome this cha llcnge we have developed a fundamentally new concept of optica ll y switchable clements based 011 dim’active wave plates (OWs). DWs...doped liquid crysta ls," J. Phys. D.: Appl. Phys., 25, 492-499 ( 1992). 17. T . Ikeda, O. Tsutsumi , " Optica l switching and image storage by

  3. Optically initiated silicon carbide high voltage switch

    Science.gov (United States)

    Caporaso, George J.; Sampayan, Stephen E.; Sullivan, James S.; Sanders; David M.

    2011-02-22

    An improved photoconductive switch having a SiC or other wide band gap substrate material, such as GaAs and field-grading liners composed of preferably SiN formed on the substrate adjacent the electrode perimeters or adjacent the substrate perimeters for grading the electric fields.

  4. Research on performance of multicasting in optical packet switched networks

    Institute of Scientific and Technical Information of China (English)

    Xin Liu; Yuefeng Ji; Lin Bai; Hongxiang Wang; Yongmei Sun

    2009-01-01

    @@ Different multicasting schemes in optical packet switched networks are discussed, including the parallel mode, serial mode, and hybrid mode multicasting schemes.Simulated modeling technique is applied to compare the network-level performance of the three multicasting schemes.A conclusion can be drawn from the results that since the hybrid-mode multicasting scheme can increase the multicast success ratio and reduce the packet retransmission times compared with the other two schemes, it is the best choice for delivering multicasting sessions in the optical packet switched networks.

  5. Experimental and theoretical investigation of semiconductor optical amplifier (SOA) based all-optical switches

    DEFF Research Database (Denmark)

    Nielsen, Mads Lønstrup

    2004-01-01

    This thesis analyzes semiconductor optical amplifier (SOA) based all-optical switches experimentally and through numerical simulations. These devices are candidates for optical signal processing functionalities such as wavelength conversion, regeneration, and logic processing in future transparent...... optical networks. The factors governing the modulation bandwidth of SOAs are determined, and schemes for reducing detrimental patterning effects are discussed. Three types of SOA-based switches are investigated numerically: so-called standardmode and differential-mode switches, and the filtering assisted...... switch. Differential -mode switches are shown to eliminate one contribution to the patterning effects, referred to as the linear patterning. This enables operation at bitrates far beyond the limit set by the carrier lifetime, but ultimately a saturation-induced patterning effect, nonlinear patterning...

  6. Large optical 3D MEMS switches in access networks

    Science.gov (United States)

    Madamopoulos, Nicholas; Kaman, Volkan; Yuan, Shifu; Jerphagnon, Olivier; Helkey, Roger; Bowers, John E.

    2007-09-01

    Interest is high among residential customers and businesses for advanced, broadband services such as fast Internet access, electronic commerce, video-on-demand, digital broadcasting, teleconferencing and telemedicine. In order to satisfy such growing demand of end-customers, access technologies such as fiber-to-the-home/building (FTTH/B) are increasingly being deployed. Carriers can reduce maintenance costs, minimize technology obsolescence and introduce new services easily by reducing active elements in the fiber access network. However, having a passive optical network (PON) also introduces operational and maintenance challenges. Increased diagnostic monitoring capability of the network becomes a necessity as more and more fibers are provisioned to deliver services to the end-customers. This paper demonstrates the clear advantages that large 3D optical MEMS switches offer in solving these access network problems. The advantages in preventative maintenance, remote monitoring, test and diagnostic capability are highlighted. The low optical insertion loss for all switch optical connections of the switch enables the monitoring, grooming and serving of a large number of PON lines and customers. Furthermore, the 3D MEMS switch is transparent to optical wavelengths and data formats, thus making it easy to incorporate future upgrades, such higher bit rates or DWDM overlay to a PON.

  7. Electronics based on two-dimensional materials.

    Science.gov (United States)

    Fiori, Gianluca; Bonaccorso, Francesco; Iannaccone, Giuseppe; Palacios, Tomás; Neumaier, Daniel; Seabaugh, Alan; Banerjee, Sanjay K; Colombo, Luigi

    2014-10-01

    The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

  8. Flexible-rate optical packet generation/detection and label swapping for optical label switching networks

    Science.gov (United States)

    Wu, Zhongying; Li, Juhao; Tian, Yu; Ge, Dawei; Zhu, Paikun; Chen, Yuanxiang; Chen, Zhangyuan; He, Yongqi

    2017-03-01

    In recent years, optical label switching (OLS) gains lots of attentions due to its intrinsic advantages to implement protocol, bit-rate, granularity and data format transparency packet switching. In this paper, we propose a novel scheme to realize flexible-rate optical packet switching for OLS networks. At the transmitter node, flexible-rate packet is generated by parallel modulating different combinations of optical carriers generated from the optical multi-carrier generator (OMCG), among which the low-speed optical label occupies one carrier. At the switching node, label is extracted and re-generated in label processing unit (LPU). The payloads are switched based on routing information and new label is added after switching. At the receiver node, another OMCG serves as local oscillators (LOs) for optical payloads coherent detection. The proposed scheme offers good flexibility for dynamic optical packet switching by adjusting the payload bandwidth and could also effectively reduce the number of lasers, modulators and receivers for packet generation/detection. We present proof-of-concept demonstrations of flexible-rate packet generation/detection and label swapping in 12.5 GHz grid. The influence of crosstalk for cascaded label swapping is also investigated.

  9. Traffic analysis and signal processing in optical packet switched networks

    DEFF Research Database (Denmark)

    Fjelde, Tina

    2002-01-01

    Gbit/s demultiplexing and 2x10 to 20 Gbit/s multiplexing. Lastly, the IWC’s capabilities as an optical logic gate for enabling more complex signal processing are demonstrated and four applications hereof are discussed. Logic OR and AND are verified in full at 10 Gbit/s using PRBS sequences coupled......This thesis focuses on functionalities that are important for the realisation of future all-optical packet switched networks, and which may be implemented using the interferometric wavelength converter. The European IST research project DAVID, with the aim of demonstrating the feasibility of a Tbit....../s optical packet switched network exploiting the best of optics and electronics, is used as a thread throughout the thesis. An overview of the DAVID network architecture is given, focussing on the MAN and WAN architecture as well as the MPLS-based network hierarchy. Subsequently, the traffic performance...

  10. EIT-based MZ-MMI all-optical switch

    Science.gov (United States)

    Bahrami, A.; Rostami, A.; Nazari, F.; Abbasian, K.

    2010-11-01

    We propose a new control structure for all-optical switching in multimode inference (MMI)-based Mach-Zehnder interferometer (MZI) devices. This structure is composed of an MZI doped by three-level nanocrystals for the realization of electromagnetically induced transparency (EIT) in the lower arm. We use two different intensities of control field for two states of the proposed switch. Using a control field in both of the two switching states is necessary, where the EIT region is transparent. By changing the intensity of the control field, the refractive index of the doped region changes, which makes the phase difference between the two arms of the MZI. Hence, the switching operation takes place. Simulation results show that the extinction ratio of the device is -32dB in the worst case.

  11. 100GHz Integrated All-Optical Switch Enabled by ALD

    CERN Document Server

    Moille, Gregory; Morgenroth, Laurence; Lehoucq, Gaëlle; Neuilly, François; Hu, Bowen; Decoster, Didier; de Rossi, Alfredo

    2015-01-01

    The carrier lifetime of a photonic crystal all-optical switch is optimized by controlling the surface of GaAs by Atomic Layer Deposition. We demonstrate an all optical modulation capability up to 100GHz at Telecom wavelengths, with a contrast as high as 7dB. Wavelength conversion has also been demonstrated at a repetition rate of 2.5GHz with average pump power of about 0.5mW

  12. Q-switched Nd:YAG optical vortex lasers.

    Science.gov (United States)

    Kim, D J; Kim, J W; Clarkson, W A

    2013-12-02

    Q-switched operation of a high-quality Nd:YAG optical vortex laser with the first order Laguerre-Gaussian mode and well-determined helical wavefronts using a fiber-based pump beam conditioning scheme is reported. A simple two-mirror resonator incorporating an acousto-optic Q-switch was employed, along with an etalon and a Brewster plate to enforce the particular helicity of the output. The laser yielded Q-switched pulses with ~250 μJ pulse energy and ~33 ns pulse duration (FWHM) at a 0.1 kHz repetition rate for 5.1 W of absorbed pump power. The handedness of the helical wavefronts was preserved regardless of the repetition rates. The prospects of further power scaling and improved laser performance are discussed.

  13. Optical mode switch based on multimode interference couplers

    Science.gov (United States)

    Xiao, Huifu; Deng, Lin; Zhao, Guolin; Liu, Zilong; Meng, Yinghao; Guo, Xiaonan; Liu, Guipeng; Liu, Su; Ding, Jianfeng; Tian, Yonghui

    2017-02-01

    In this paper, we propose an optical mode switch based on two cascaded multimode interference (MMI) couplers. After a fundamental mode divided into two equal-power fundamental modes in the first MMI coupler, the thermo-optic effect is employed to modulate the phase of the two fundamental modes before directed to the next MMI for the purpose of mode switching. By adjusting the electric signals applied to the modulation arms, the proposed device can implement mode switching in three states: (a) one first-order and two fundamental modes simultaneously output, (b) one first-order mode output, and (c) two fundamental modes output. As a result, the simulated excess losses are -0.29 dB, -0.10 dB, and -0.63 dB, respectively.

  14. Simulation of Optical Packet—Switched Metropolitan Area Network

    Institute of Scientific and Technical Information of China (English)

    朱炳春; 贾潞华; 等

    2002-01-01

    This paper introduces architectures of two types optical packet-switched metropolitan area networks and their media access control protocols.We have designed ralated network simulation systems.With these simulation systems,the characteristics and performanceof the two MANs can be achieved.

  15. A congestion alleviated scheme in optical burst switching network

    Institute of Scientific and Technical Information of China (English)

    Gang Wang; Hongxiang Wang; Yuefeng Ji

    2008-01-01

    An optical burst switching (OBS) network platform is established with a ring topology of three nodes. A congestion alleviated scheme using advanced token protocol and wavelength tunable receivers is demonstrated to optimize the network platform. Experimental results testify that this scheme can resist collision at the level of 0.1% congestion rate.

  16. Resource allocation in circuit-switched all-optical networks

    Science.gov (United States)

    Marquis, Douglas; Barry, Richard A.; Finn, Steven G.; Parikh, Salil A.; Swanson, Eric A.; Thomas, Robert E.

    1996-03-01

    We describe an all-optical network testbed deployed in the Boston area, and research surrounding the allocation of optical resources -- frequencies and time slots -- within the network. The network was developed by a consortium of AT&T Bell Laboratories, Digital Equipment Corporation, and Massachusetts Institute of Technology under a grant from ARPA. The network is organized as a hierarchy consisting of local, metropolitan, and wide area nodes tea support optical broadcast and routing modes. Frequencies are shared and reused to enhance network scalability. Electronic access is provided through optical terminals that support multiple services having data rates between 10 Mbps/user and 10 Gbps/user. Of particular interest for this work is the 'B-service,' which simultaneously hops frequency and time slots on each optical terminal to allow frequency sharing within the AON. B-service provides 1.244 Gbps per optical terminal, with bandwidth for individual connections divided in increments as small as 10 Mbps. We have created interfaces between the AON and commercially available electronic circuit-switched and packet-switched networks. The packet switches provide FDDI (datacomm), T3 (telecomm), and ATM/SONET switching at backplane rates of over 3 Gbps. We show results on network applications that dynamically allocate optical bandwidth between electronic packet-switches based on the offered load presented by users. Bandwidth allocation granularity is proportional to B-Service slots (10-1244 Mbps), and switching times are on the order of one second. We have also studied the effects of wavelength changers upon the network capacity and blocking probabilities in wide area all-optical networks. Wavelength changers allow a change in the carrier frequency (within the network) without disturbing the data modulation. The study includes both a theoretical model of blocking probabilities based on network design parameters, and a computer simulation of blocking in networks with and

  17. Optical switching by stimulated thermal Rayleigh scattering

    Science.gov (United States)

    Peterson, Lauren M.

    1986-06-01

    Preliminary experiments were conducted whose ultimate goal is to develop all-optical control functions useful in an all-optical or optical-electronic hybrid digital computer or for optical interconnects. Stimulated thermal Rayleigh scattering (STRS) based upon generator experiments was pursued for scattering angles of 90 deg and 180 deg (backscattering). A pulsed nitrogen laser pumped dye laser served as the radiation source and the interaction medium was a liquid to which an absorbing dye was added. STRS amplifier experiments were successful and gain was observed and studied parametrically using eosine dye in ethanol. The gain was found to increase (although the gain coefficient decreased) with increasing pump power and the gain was found to be a maximum at an absorption coefficient of about 2.6 per cm. The generator experiments did not lead to stimulated scattering due to the limited output power of the laser and its multi-longitudinal spectral mode content. These studies will be continued along with analytical modeling in order to characterize the interaction and to enable the optimization of the scattering process.

  18. Integrated optical buffers for packet-switched networks

    Science.gov (United States)

    Burmeister, Emily Frances

    Routers form the backbone of the Internet, directing data to the right locations with huge throughput capacity of terabits/second) and very few errors (1 error allowed in 1012 bits). However, as the Internet continues to grow rapidly, so must the capacity of electronic routers, thereby also growing in footprint and power consumption. The energy bill alone has developers looking for an alternate solution. Today's routers can only operate with electrical signals although Internet data is transmitted optically. This requires the data to be converted from the optical domain to the electrical domain and back again. Optical routers have the potential of saving in power by omitting these conversions, but have been held back in part by the lack of a practical optical memory device. This work presents the first integrated optical buffer for next generation optical packet-switched networks. Buffering is required in a router to move packets of data in order to avoid collisions between packets heading to the same destination at the same time. The device presented here uses an InP-based two-by-two switch with a silica waveguide delay to form a recirculating buffer. Packet storage was shown with 98% packet recovery for 5 circulations. Autonomous contention resolution was demonstrated with two buffered channels to show that the technology is a realistic solution for creating multiple element buffers on multiple router ports. This thesis proposes and demonstrates the first integrated optical random access memory, thereby making a great stride toward high capacity optical routers.

  19. Two-dimensional Kagome photonic bandgap waveguide

    DEFF Research Database (Denmark)

    Nielsen, Jens Bo; Søndergaard, Thomas; Libori, Stig E. Barkou;

    2000-01-01

    The transverse-magnetic photonic-bandgap-guidance properties are investigated for a planar two-dimensional (2-D) Kagome waveguide configuration using a full-vectorial plane-wave-expansion method. Single-moded well-localized low-index guided modes are found. The localization of the optical modes...... is investigated with respect to the width of the 2-D Kagome waveguide, and the number of modes existing for specific frequencies and waveguide widths is mapped out....

  20. A high average power electro-optic switch using KTP

    Energy Technology Data Exchange (ETDEWEB)

    Ebbers, C.A.; Cook, W.M.; Velsko, S.P.

    1994-04-01

    High damage threshold, high thermal conductivity, and small thermo-optic coefficients make KTiOPO{sub 4} (KTP) an attractive material for use in a high average power Q-switch. However, electro-chromic damage and refractive index homogeneity have prevented the utilization of KTP in such a device in the past. This work shows that electro-chromic damage is effectively suppressed using capacitive coupling, and a KTP crystal can be Q-switched for 1.5 {times} 10{sup 9} shots without any detectable electro-chromic damage. In addition, KTP with the high uniformity and large aperture size needed for a KTP electro-optic Q-switch can be obtained from flux crystals grown at constant temperature. A thermally compensated, dual crystal KTP Q-switch, which successfully produced 50 mJ pulses with a pulse width of 8 ns (FWHM), has been constructed. In addition, in off-line testing the Q-switch showed less than 7% depolarization at an average power loading of 3.2 kW/cm{sup 2}.

  1. Scalable In-Band Optical Notch-Filter Labeling for Ultrahigh Bit Rate Optical Packet Switching

    DEFF Research Database (Denmark)

    Medhin, Ashenafi Kiros; Galili, Michael; Oxenløwe, Leif Katsuo

    2014-01-01

    with only 0.9-dB power penalty to achieve BER of 1E-9. Using the proposed labeling scheme, optical packet switching of 640 Gb/s data packets is experimentally demonstrated in which two data packets are labeled by making none and one spectral hole using a notch filter and are switched using a LiNbO$_3...

  2. Fully reconfigurable 2x2 optical cross-connect using tunable wavelength switching modules

    DEFF Research Database (Denmark)

    Liu, Fenghai; Zheng, Xueyan; Pedersen, Rune Johan Skullerud;

    2001-01-01

    A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels.......A modular tunable wavelength switching module is proposed and used to construct 2x2 fully reconfigurable optical cross-connects. Large size optical switch is avoided in the OXC and it is easy to upgrade to more wavelength channels....

  3. Optical Switching and Bit Rates of 40 Gbit/s and above

    DEFF Research Database (Denmark)

    Ackaert, A.; Demester, P.; O'Mahony, M.;

    2003-01-01

    Optical switching in WDM networks introduces additional aspects to the choice of single channel bit rates compared to WDM transmission systems. The mutual impact of optical switching and bit rates of 40 Gbps and above is discussed.......Optical switching in WDM networks introduces additional aspects to the choice of single channel bit rates compared to WDM transmission systems. The mutual impact of optical switching and bit rates of 40 Gbps and above is discussed....

  4. Scheduling Issues in ECOFRAME Optical Packet Switched Ring

    Directory of Open Access Journals (Sweden)

    P. Gravey

    2011-06-01

    Full Text Available In the metropolitan area, traditional SONET/SDH circuit switched rings are likely to be replaced with optical packet/burst switching technologies. In this paper we consider a slotted WDM optical packet ring operating without resource reservation mechanisms. In such rings, optical packets in transit have priority over traffic to be inserted by the node. Packets to be inserted are thus queued according to their destination, in order to avoid headof-line blocking. We focus on scheduling policies and compare several MaxWeight scheduling policies, including Oldest Packet First (OPF which emulates FIFO queueing while avoiding head-of-line blocking. We show that there is a trade-off between implementation complexity and fairness, and identify the Largest Virtual Waiting Time First (LVWTF scheduling policy as presenting both a low complexity and a good fairness performance.

  5. Simulation of the Physical Performance of Optical Packet Switching Nodes

    Institute of Scientific and Technical Information of China (English)

    王春华; 李力; 等

    2002-01-01

    A graphical and visual simulation system for the study of optical packet switching(OPS)nodes is accomplished.With the simulation system,the effect on physical performance-bit error rate(BER)due to a variety of factors such as the crosstalk parameters of OPS nodes,number of cascaded OPS nodes,length of optical output buffer,traffic load and fluctuation of amplitude of optical signals are evaluated.Reliability of the simulation system is proved by the analytical results obtained in all the above cases.

  6. Casimir switch: steering optical transparency with vacuum forces

    CERN Document Server

    Liu, X -f; Jing, H

    2016-01-01

    The Casimir force, originating from vacuum zero-point energy, is one of the most intriguing purely quantum effects. It has attracted renewed interests in current field of nanomechanics, due to the rapid size decrease of on-chip devices. Here we study the optomechanically-induced transparency (OMIT) with a tunable Casimir force. We find that the optical output rate can be significantly altered by the vacuum force, even terminated and then restored, indicating a highly-controlled optical switch. Our result addresses the possibility of designing exotic optical nano-devices by harnessing the power of vacuum.

  7. Optimizing POF/PCF based optical switch for indoor LAN

    Science.gov (United States)

    Bhuiyan, M. M. I.; Rashid, M. M.; Ahmed, Sayem; Bhuiyan, M.; Kajihara, M.

    2013-12-01

    For indoor local area network (LAN) the Polymer optical fiber (POF) is mostly appropriate, because of its large core diameter and flexible material. A 1×2 optical switch for indoor LAN using POF and a shape memory alloy (SMA) coil actuator with magnetic latches was successfully fabricated and tested. To achieve switching by the movement of a POF, large displacement is necessary because the core diameter is large (e.g., 0.486mm). A SMA coil actuator is used for large displacement and a magnetic latching system is used for fixing the position of the shifted POF. The insertion loss is 0.40 to 0.50dB and crosstalk is more than 50dB without index-matching oil. Switching speed is less than 1s at a driving current of 80mA. A cycling test was performed 1.4 million times. Polymer clad fiber optical (PCF) switch also fabricated and tasted.

  8. Recent Advances in Optically Controlled Bulk Semiconductor Switches

    Science.gov (United States)

    1985-06-01

    REO!NT AIJifl,NCES IN (FTICALIX ~1Ra.LW IILK SHttiaHlOCIOR swrrams L. Bovino , T. Burke, R. Youmans, M. Weiner, J. Carter U.S. Ar~ Electronics...fabrication of all of our optically activated switches. B.e.fer.enc.es. 1. L. Bovino , R. Youmans, T. Burke, M.Weiner, "Modulator Circuits Using Q...tically Activated Switches", Record of 16th Power Modulator SYJll>o- siurn, pp 235-239, June 1984. 2. M. Weiner, T. Burke, R. Youmans, L. Bovino , J

  9. Development and fabrication of monolithically integrated optical packet switches

    Science.gov (United States)

    Yanson, Dan A.; Silver, Mark; Vassalli, Omar; Campbell, Margaret; Masterton, Graeme; McDougall, Stewart D.; Marsh, John H.

    2007-02-01

    We report development activities towards realization of fully integrated 1x2, 2x2, and 4x4 cross-point optical switches for WDM-packet-based data networking. Two enabling technologies, quantum-well intermixing and etched turning mirrors, are developed and demonstrated in InGaAs/InAlGaAs InP-based material at a wavelength of 1.55 μm. We describe the use of both technologies to fabricate switch chips with different port counts.

  10. Ultrafast polarization optical switch constructed from one-dimensional photonic crystal and its performance analysis

    Institute of Scientific and Technical Information of China (English)

    WANG Tao; LI Qing; GAO DingShan

    2009-01-01

    All-optical switch with the ultrafast optical switching rate is a key device in the next generation optical network. In this article, we propose a polarization switch with ps switching time, which is constructed from one-dimensional resonant photonic crystal (1D RPC). The model of switch operating at 1.5 μm is established based on the optical stark effect (OSE). We calculate the performance indices of the switch and the influences of errors of periods and refractive index on the performance characteristics.

  11. Microscopic model for all optical switching in ferromagnets

    Science.gov (United States)

    Cornelissen, T. D.; Córdoba, R.; Koopmans, B.

    2016-04-01

    The microscopic mechanism behind the all optical switching (AOS) in ferromagnets has triggered intense scientific debate. Here, the microscopic three-temperature model is utilized to describe AOS in a perpendicularly magnetized ferromagnetic Co/Pt system. We demonstrate that AOS in such a ferromagnet can be explained with the Inverse Faraday Effect (IFE). The influence of the strength and lifetime of the IFE induced field pulse on the switching process are investigated. We found that because of strong spin-orbit coupling, the minimal lifetime of the IFE needed to obtain switching is of the order of 0.1 ps, which is shorter than previously assumed. Moreover, spatial images of the domain pattern after AOS in Co/Pt, as well as their dependence on applying an opposite magnetic field, are qualitatively reproduced.

  12. All-optical switching in subwavelength metallic grating structure containing nonlinear optical materials.

    Science.gov (United States)

    Min, Changjun; Wang, Pei; Chen, Chunchong; Deng, Yan; Lu, Yonghua; Ming, Hai; Ning, Tingyin; Zhou, Yueliang; Yang, Guozhen

    2008-04-15

    All-optical switching based on a subwavelength metallic grating structure containing nonlinear optical materials has been proposed and numerically investigated. Metal-dielectric composite material is used in the switching for its larger third-order nonlinear susceptibility (approximately 10(-7)esu) and ultrafast response properties. The calculated dependence of the signal light intensity on the pump light intensity shows a bistable behavior, which results in a significant switch effect. It rests on a surface plasmon's enhanced intensity-dependent change of the effective dielectric constant of Kerr nonlinear media, corresponding to a transition of the far-field transmission from a low- to high-transmission state. The study of this switching structure shows great advantages of smaller size, lower requirement of pump light intensity, and shorter switching time at approximately the picosecond level.

  13. Optical probing of spin dynamics of two-dimensional and bulk electrons in a GaAs/AlGaAs heterojunction system

    Energy Technology Data Exchange (ETDEWEB)

    Rizo, P J; Pugzlys, A; Slachter, A; Denega, S Z; Van Loosdrecht, P H M; Van der Wal, C H [Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, NL-9747AG Groningen (Netherlands); Reuter, D; Wieck, A D, E-mail: c.h.van.der.wal@rug.n [Angewandte Festkoerperphysik, Ruhr-Universitaet Bochum, D-44780 Bochum (Germany)

    2010-11-15

    The electron spin dynamics in a GaAs/AlGaAs heterojunction system containing a high-mobility two-dimensional electron gas (2DEG) have been studied in this paper by using pump-probe time-resolved Kerr rotation experiments. Owing to the complex layer structure of this material, the transient Kerr response contains information about electron spins in the 2DEG, an epilayer and the substrate. We analyzed the physics that underlies this Kerr response, and established the conditions under which it is possible to unravel the signatures of the various photo-induced spin populations. This was used to explore how the electron spin dynamics of the various populations depend on the temperature, magnetic field and pump-photon density. The results show that the D'Yakonov-Perel' mechanism for spin dephasing (by spin-orbit fields) plays a prominent role in both the 2DEG and bulk populations over a wide range of temperatures and magnetic fields. Our results are of importance for future studies on the 2DEG in this type of heterojunction system, which offers interesting possibilities for spin manipulation and control of spin relaxation via tunable spin-orbit effects.

  14. High-Resolution Mammography Detector Employing Optical Switching Readout

    Science.gov (United States)

    Irisawa, Kaku; Kaneko, Yasuhisa; Yamane, Katsutoshi; Sendai, Tomonari; Hosoi, Yuichi

    Conceiving a new detector structure, FUJIFILM Corporation has successfully put its invention of an X-ray detector employing "Optical Switching" into practical use. Since Optical Switching Technology allows an electrode structure to be easily designed, both high resolution of pixel pitch and low electrical noise readout have been achieved, which have consequently realized the world's smallest pixel size of 50×50 μm2 from a Direct-conversion FPD system as well as high DQE. The digital mammography system equipped with this detector enables to acquire high definition images while maintaining granularity. Its outstanding feature is to be able to acquire high-precision images of microcalcifications which is an important index in breast examination.

  15. All-Optical Switching in Photonic Crystal Cavities

    DEFF Research Database (Denmark)

    Heuck, Mikkel

    All-Optical switching in photonic crystal waveguide-cavity structures is studied predominantly theoretically and numerically, but also from an experimental point of view. We have calculated the first order perturbations to the resonance frequency and decay rate of cavity modes, using a mathematical...... separated. This device was fabricated and characterized by colleagues within the group, and it was shown to perform very well in terms of cross-talk between the signal and pump. Theoretical investigations as well as practical design proposals have resulted from a study of waveguide-cavity structures...... exhibiting Fano resonances. These devices were predicted to be superior to structures with the more well-known Lorentzian line shape in terms of energy consumption and switching contrast. Finally, the mathematical framework of optimal control theory was employed as a general setting, in which the optical...

  16. Double-Teeth-Shaped Plasmonic Waveguide Electro-Optical Switches

    Institute of Scientific and Technical Information of China (English)

    ZHU Jia-Hu; HUANG Xu-Guang; MEI Xian

    2011-01-01

    @@ An electro-optical switch based on a plasmonic T-shaped waveguide structure with a double-teeth-shaped waveguide filled with 4-dimet4ylamino-N-methyl-4stilbazolium tosylate is proposed and numerically investigated.TheFinite-difference time domain simulation results reveal that the structure can operate as a circuit switch by controlling the external voltages V1 and/or V2.The proposed structure can also operate as a variable optical attenuator, which can continuously attenuate the power of a light beam from 6dB to 30dB by an external electrical field.The structure is of small size of a few hundred nanometers.Our results may open a possibility to construct nanoscale high-density photonic integration circuits.

  17. Two-dimensional liquid chromatography

    DEFF Research Database (Denmark)

    Græsbøll, Rune

    of this thesis is on online comprehensive two-dimensional liquid chromatography (online LC×LC) with reverse phase in both dimensions (online RP×RP). Since online RP×RP has not been attempted before within this research group, a significant part of this thesis consists of knowledge and experience gained...

  18. Electro-optical switching by liquid-crystal controlled metasurfaces

    CERN Document Server

    Decker, Manuel; Minovich, Alexander; Staude, Isabelle; Miroshnichenko, Andrey E; Chigrin, Dmitry; Neshev, Dragomir N; Jagadish, Chennupati; Kivshar, Yuri S

    2013-01-01

    We study the optical response of a metamaterial surface created by a lattice of split-ring resonators covered with a nematic liquid crystal and demonstrate millisecond timescale switching between electric and magnetic resonances of the metasurface. This is achieved due to a high sensitivity of liquid-crystal molecular reorientation to the symmetry of the metasurface as well as to the presence of a bias electric field. Our experiments are complemented by numerical simulations of the liquid-crystal reorientation.

  19. Silicon Modulators, Switches and Sub-systems for Optical Interconnect

    Science.gov (United States)

    Li, Qi

    Silicon photonics is emerging as a promising platform for manufacturing and integrating photonic devices for light generation, modulation, switching and detection. The compatibility with existing CMOS microelectronic foundries and high index contrast in silicon could enable low cost and high performance photonic systems, which find many applications in optical communication, data center networking and photonic network-on-chip. This thesis first develops and demonstrates several experimental work on high speed silicon modulators and switches with record performance and novel functionality. A 8x40 Gb/s transmitter based on silicon microrings is first presented. Then an end-to-end link using microrings for Binary Phase Shift Keying (BPSK) modulation and demodulation is shown, and its performance with conventional BPSK modulation/ demodulation techniques is compared. Next, a silicon traveling-wave Mach- Zehnder modulator is demonstrated at data rate up to 56 Gb/s for OOK modulation and 48 Gb/s for BPSK modulation, showing its capability at high speed communication systems. Then a single silicon microring is shown with 2x2 full crossbar switching functionality, enabling optical interconnects with ultra small footprint. Then several other experiments in the silicon platform are presented, including a fully integrated in-band Optical Signal to Noise Ratio (OSNR) monitor, characterization of optical power upper bound in a silicon microring modulator, and wavelength conversion in a dispersion-engineered waveguide. The last part of this thesis is on network-level application of photonics, specically a broadcast-and-select network based on star coupler is introduced, and its scalability performance is studied. Finally a novel switch architecture for data center networks is discussed, and its benefits as a disaggregated network are presented.

  20. Atom-loss-induced quantum optical bi-stability switch

    Institute of Scientific and Technical Information of China (English)

    Wu Bao-Jun; Cui Fu-Cheng

    2012-01-01

    We investigate the nonlinear dynamics of a system composed of a cigar-shaped Bose-Einstein condensate and an optical cavity with the two sides coupled dispersively.By adopting discrete-mode approximation for the condensate,taking atom loss as a necessary part of the model to analyze the evolution of the system,while using trial and errormethod to find out steady states of the system as a reference,numerical simulation demonstrates that with a constant pump,atom loss will trigger a quantum optical bi-stability switch,which predicts a new interesting phenomenon for experiments to verify.

  1. Quantum Key Based Burst Confidentiality in Optical Burst Switched Networks

    Directory of Open Access Journals (Sweden)

    A. M. Balamurugan

    2014-01-01

    Full Text Available The optical burst switching (OBS is an emergent result to the technology concern that could achieve a feasible network in future. They are endowed with the ability to meet the bandwidth requirement of those applications that require intensive bandwidth. There are more domains opening up in the OBS that evidently shows their advantages and their capability to face the future network traffic. However, the concept of OBS is still far from perfection facing issues in case of security threat. The transfer of optical switching paradigm to optical burst switching faces serious downfall in the fields of burst aggregation, routing, authentication, dispute resolution, and quality of service (QoS. This paper deals with employing RC4 (stream cipher to encrypt and decrypt bursts thereby ensuring the confidentiality of the burst. Although the use of AES algorithm has already been proposed for the same issue, by contrasting the two algorithms under the parameters of burst encryption and decryption time, end-to-end delay, it was found that RC4 provided better results. This paper looks to provide a better solution for the confidentiality of the burst in OBS networks.

  2. Quantum key based burst confidentiality in optical burst switched networks.

    Science.gov (United States)

    Balamurugan, A M; Sivasubramanian, A

    2014-01-01

    The optical burst switching (OBS) is an emergent result to the technology concern that could achieve a feasible network in future. They are endowed with the ability to meet the bandwidth requirement of those applications that require intensive bandwidth. There are more domains opening up in the OBS that evidently shows their advantages and their capability to face the future network traffic. However, the concept of OBS is still far from perfection facing issues in case of security threat. The transfer of optical switching paradigm to optical burst switching faces serious downfall in the fields of burst aggregation, routing, authentication, dispute resolution, and quality of service (QoS). This paper deals with employing RC4 (stream cipher) to encrypt and decrypt bursts thereby ensuring the confidentiality of the burst. Although the use of AES algorithm has already been proposed for the same issue, by contrasting the two algorithms under the parameters of burst encryption and decryption time, end-to-end delay, it was found that RC4 provided better results. This paper looks to provide a better solution for the confidentiality of the burst in OBS networks.

  3. Novel coherent optical OFDM-based transponder for optical slot switched networks

    DEFF Research Database (Denmark)

    Mestre, Miquel A.; Estaran, Jose M.; Jenneve, Philippe

    2016-01-01

    We report a novel coherent optical OFDM transponder approach capable of recovering microsecond-scale data-burst while adapting to tight filtering constraints present in optical slot switched intradatacenter networks. Filtering effects in such large node-count environments are reviewed. The CO...

  4. An ultra-fast optical header replacement technology and its application for broadband optical packet switch

    NARCIS (Netherlands)

    Tian, B.; van Etten, Wim; Beuwer, W.A.M.; Thienpont, H.; Berghmans, F.; Danckaert, J.; Desmet, L.

    2001-01-01

    An optical header replacement technology based on Self Electro-optic Effect Devices (SEEDs) is presented. By using the measurement result of a 75 μm long SEED device, we simulate an 8 Gbps throughput is achievable. Based on the switching characteristics of SEEDs, we proposed several methods to impro

  5. Separation and insertion of optical bit-serial label in optical packet switching

    Institute of Scientific and Technical Information of China (English)

    Yun Ling; Kun Qiu; Mian Zheng

    2006-01-01

    @@ The bipolar phase-shift-keying (BPSK) optical orthogonal codes (OOCs) are inserted into the optical packet format of bit-serial label. The ultra-fast separation of the label and payload is performed through the auto-correlation pulses indicating the time position at which the optical switch changes the state.The insertion of the new label can also be realized by detecting the auto-correlation pulse at the line rate. Especially, the scheme can be adapted to the asynchronous separation and insertion and realize the variable-length packet switching. The results of simulation verify the feasibility of the scheme.

  6. All-optical switching and nonlinear optical properties of HBT in ethanol solution

    Institute of Scientific and Technical Information of China (English)

    Zheng Jia-Jin; Zhang Gui-Lan; Guo Yang-Xue; Li Xiang-Ping; Chen Wen-Ju

    2007-01-01

    This paper demonstrates an all-optical switching model system comprising a single pulsed pump beam at 355 nm and a CW He-Ne signal beam at 632.8 nm with 2-(2'-hydroxyphenyl)benzothiazole (HBT) in ethanol solution. The origins of the optical switching effect were discussed. By the study of nonlinear optical properties for HBT in ethanol solvent, this paper verified that the excited-state intramolecular proton transfer (ESIPT) effect of HBT and the thermal effect of solvent worked on quite different time scales and together induced the change of the refractive index of HBT solution, leading to the signal beam deflection. The results indicated that the HBT molecule could be an excellent candidate for high-speed and high-sensitive optical switching devices.

  7. A novel all-optical label processing based on multiple optical orthogonal codes sequences for optical packet switching networks

    Science.gov (United States)

    Zhang, Chongfu; Qiu, Kun; Xu, Bo; Ling, Yun

    2008-05-01

    This paper proposes an all-optical label processing scheme that uses the multiple optical orthogonal codes sequences (MOOCS)-based optical label for optical packet switching (OPS) (MOOCS-OPS) networks. In this scheme, each MOOCS is a permutation or combination of the multiple optical orthogonal codes (MOOC) selected from the multiple-groups optical orthogonal codes (MGOOC). Following a comparison of different optical label processing (OLP) schemes, the principles of MOOCS-OPS network are given and analyzed. Firstly, theoretical analyses are used to prove that MOOCS is able to greatly enlarge the number of available optical labels when compared to the previous single optical orthogonal code (SOOC) for OPS (SOOC-OPS) network. Then, the key units of the MOOCS-based optical label packets, including optical packet generation, optical label erasing, optical label extraction and optical label rewriting etc., are given and studied. These results are used to verify that the proposed MOOCS-OPS scheme is feasible.

  8. Two dimensional unstable scar statistics.

    Energy Technology Data Exchange (ETDEWEB)

    Warne, Larry Kevin; Jorgenson, Roy Eberhardt; Kotulski, Joseph Daniel; Lee, Kelvin S. H. (ITT Industries/AES Los Angeles, CA)

    2006-12-01

    This report examines the localization of time harmonic high frequency modal fields in two dimensional cavities along periodic paths between opposing sides of the cavity. The cases where these orbits lead to unstable localized modes are known as scars. This paper examines the enhancements for these unstable orbits when the opposing mirrors are both convex and concave. In the latter case the construction includes the treatment of interior foci.

  9. Two-Dimensional Vernier Scale

    Science.gov (United States)

    Juday, Richard D.

    1992-01-01

    Modified vernier scale gives accurate two-dimensional coordinates from maps, drawings, or cathode-ray-tube displays. Movable circular overlay rests on fixed rectangular-grid overlay. Pitch of circles nine-tenths that of grid and, for greatest accuracy, radii of circles large compared with pitch of grid. Scale enables user to interpolate between finest divisions of regularly spaced rule simply by observing which mark on auxiliary vernier rule aligns with mark on primary rule.

  10. Rheological, optical, and ballistic investigations of paraffin-based fuels for hybrid rocket propulsion using a two-dimensional slab-burner

    Science.gov (United States)

    Kobald, M.; Toson, E.; Ciezki, H.; Schlechtriem, S.; di Betta, S.; Coppola, M.; DeLuca, L.

    2016-07-01

    This paper describes combined rheological, ballistic, and optical analyses performed on paraffin-based mixtures that can be used as high regression rate hybrid rocket fuels. Experimental activities have been done at the DLR Institute of Space Propulsion in Lampoldshausen and at SPLab of Politecnico di Milano [1]. Herein, the experiments that were performed at the DLR are described in detail. Viscosity, surface tension, and regression rate of the fuels have been determined. Furthermore, the combustion was evaluated by optical measurements. Data collected so far indicate an increasing regression rate for decreasing viscosity of the liquid paraffin which is in accordance with the current theories. Droplet entrainment, which is related to high regression rates, is only visible for the low-viscosity paraffin-based fuels.

  11. A novel optical burst switching architecture for high speed networks

    Institute of Scientific and Technical Information of China (English)

    Amit Kumar Garg; R. S. Kaler

    2008-01-01

    A novel optical burst switching (OBS) high speed network architecture has been proposed. To verify its feasibility and evaluate its performance, just-enough-time (JET) signaling has been considered as a high performance protocol. In the proposed architecture, to avoid burst losses, firstly, a short-priorconfirrnation-packet (SPCP) is sent over the control channel that simulates the events that the actual packet will experience. Once SPCP detects a drop at any of the intermediate nodes, the actual packet is not sent but the process repeats. In order to increase network utilization, cost effectiveness and to overcome some limitations of conventional OBS, inherent codes (e.g., orthogonal optical codes (OOC)),which are codified only in intensity, has been used. Through simulations, it shows that a decrease in burst loss probability, cost effectiveness and a gain in processing time are obtained when optical label processing is used as compared with electronic processing.

  12. Weakly disordered two-dimensional Frenkel excitons

    Science.gov (United States)

    Boukahil, A.; Zettili, Nouredine

    2004-03-01

    We report the results of studies of the optical properties of weakly disordered two- dimensional Frenkel excitons in the Coherent Potential Approximation (CPA). An approximate complex Green's function for a square lattice with nearest neighbor interactions is used in the self-consistent equation to determine the coherent potential. It is shown that the Density of States is very much affected by the logarithmic singularities in the Green's function. Our CPA results are in excellent agreement with previous investigations by Schreiber and Toyozawa using the Monte Carlo simulation.

  13. Reconfigurable nonblocking 4-port silicon thermo-optic optical router based on Mach-Zehnder optical switches.

    Science.gov (United States)

    Yang, Lin; Xia, Yuhao; Zhang, Fanfan; Chen, Qiaoshan; Ding, Jianfeng; Zhou, Ping; Zhang, Lei

    2015-04-01

    We demonstrate a reconfigurable nonblocking 4-port silicon thermo-optic optical router based on Mach-Zehnder optical switches. For all optical links in its 9 routing states, the optical signal-to-noise ratios are larger than 15 dB in the wavelength range from 1525 to 1565 nm. Each optical link of the optical router can manipulate 50 wavelength-division-multiplexing channels with the data rate of 32 Gbps for each channel in the same wavelength range. Its average energy efficiency is about 16.3 fJ/bit, and its response time is about 19 μs.

  14. Diarylethene-modified nucleotides for switching optical properties in DNA

    Directory of Open Access Journals (Sweden)

    Sebastian Barrois

    2012-06-01

    Full Text Available Diarylethenes were attached to the 5-position of 2’-deoxyuridine in order to yield three different photochromic nucleosides. All nucleosides were characterized with respect to their absorption and photochromic properties. Based on these results, the most promising photochromic DNA base modification was incorporated into representative oligonucleotides by using automated phosphoramidite chemistry. The switching of optical properties in DNA can be achieved selectively at 310 nm (forward and 450 nm (backward; both wavelengths are outside the normal nucleic acid absorption range. Moreover, this nucleoside was proven to be photochemically stable and allows switching back and forth several times. These results open the way for the use of diarylethenes as photochromic compounds in DNA-based architectures.

  15. Optical switching of nuclear spin-spin couplings in semiconductors.

    Science.gov (United States)

    Goto, Atsushi; Ohki, Shinobu; Hashi, Kenjiro; Shimizu, Tadashi

    2011-07-05

    Two-qubit operation is an essential part of quantum computation. However, solid-state nuclear magnetic resonance quantum computing has not been able to fully implement this functionality, because it requires a switchable inter-qubit coupling that controls the time evolutions of entanglements. Nuclear dipolar coupling is beneficial in that it is present whenever nuclear-spin qubits are close to each other, while it complicates two-qubit operation because the qubits must remain decoupled to prevent unwanted couplings. Here we introduce optically controllable internuclear coupling in semiconductors. The coupling strength can be adjusted externally through light power and even allows on/off switching. This feature provides a simple way of switching inter-qubit couplings in semiconductor-based quantum computers. In addition, its long reach compared with nuclear dipolar couplings allows a variety of options for arranging qubits, as they need not be next to each other to secure couplings.

  16. Monolithic, High-Speed Fiber-Optic Switching Array for Lidar Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed optical device is a fiber-based multi-channel switch to quickly switch a fiber-coupled laser among many possible output channels to create a fiber-based...

  17. 160 Gbit/s optical packet switching using a silicon chip

    DEFF Research Database (Denmark)

    Hu, Hao; Ji, Hua; Galili, Michael;

    2012-01-01

    We have successfully demonstrated 160 Gbit/s all-optical packet switching based on cross-phase modulation using a silicon chip. Error free performance is achieved for the 4-to-1 switched 160 Gbit/s packet....

  18. All-optical switching of magnetoresistive devices using telecom-band femtosecond laser

    Science.gov (United States)

    He, Li; Chen, Jun-Yang; Wang, Jian-Ping; Li, Mo

    2015-09-01

    Ultrafast all-optical switching of the magnetization of various magnetic systems is an intriguing phenomenon that can have tremendous impact on information storage and processing. Here, we demonstrate all-optical switching of GdFeCo alloy films using a telecom-band femtosecond fiber laser. We further fabricate Hall cross devices and electrically readout all-optical switching by measuring anomalous Hall voltage changes. The use of a telecom laser and the demonstrated all-optical switching of magnetoresistive devices represent the first step toward integration of opto-magnetic devices with mainstream photonic devices to enable novel optical and spintronic functionalities.

  19. Micro Electro Mechanical Systems (MEMS) Micro-Switches for Use in DC, RF, and Optical Applications

    Science.gov (United States)

    Suzuki, Kenichiro

    2002-06-01

    Micromachined micro-switches have stimulated the development of the core infrastructure technology for the next generation communication systems because of their superior performance. They are fabricated by similar silicon micromachined processes, but the switch structure and its characteristics depend on each application. Micro electro mechanical systems (MEMS) technology has been applied to micro relays, RF switches, and optical switches; as a result, optical and mechanical performance has been improved.

  20. Optimization of all-optical EDFA-based Sagnac-interferometer switch.

    Science.gov (United States)

    Wang, Fei; Li, Chunfei

    2007-10-17

    We perform optimization of all-optical EDFA-based Sagnac - interferometer switch through an analytical model and numerical simulations by solving nonlinear Schrödinger equations. The effects of the performance of EDFA on the bit rate and the switching power are investigated for all-optical switch based on self-phase or cross-phase modulation. The simulated results show that ultra-low switching power (EDFA.

  1. Performance analysis of multiple optical orthogonal codes sequences-based optical labels for optical packet switching networks

    Science.gov (United States)

    Zhang, Chongfu; Ma, Chunli; Wang, Zhengsuan; Qiu, Kun

    2011-09-01

    Multiple optical orthogonal codes sequences (MOOCS)-based optical labels for optical packet switching (MOOCS-OPS) were proposed and studied in our previous works. In order to evaluate the performances of the MOOCS-OPS networks resulting from interference of the MOOCS-based optical labels, we utilize a new study method that applies the independent case of multiple optical orthogonal codes to derive the probability function of the MOOCS-OPS networks for the first time. Additionally, the optical label processing time, the utilization efficiency, and the packet loss rate in the MOOCS-OPS networks are also considered. We discuss the performance and efficiency characteristics with a variety of parameters, and compare some characteristics of the system employed by a single optical orthogonal code or MOOCS-based optical labels. The performances of the system are also calculated, and our results verify that the method and the networks are effective. Moreover, it is found that performances of the MOOCS-OPS networks would, negatively, be worsened, compared with the single optical orthogonal code-based optical label for optical packet switching; however, the MOOCS-OPS networks can greatly enlarge the scalability of the optical packet switching networks.

  2. Two dimensional vibrations of the guinea pig apex organ of Corti measured in vivo using phase sensitive Fourier domain optical coherence tomography

    Science.gov (United States)

    Ramamoorthy, Sripriya; Zhang, Yuan; Petrie, Tracy; Fridberger, Anders; Ren, Tianying; Wang, Ruikang; Jacques, Steven L.; Nuttall, Alfred L.

    2015-02-01

    In this study, we measure the in vivo apical-turn vibrations of the guinea pig organ of Corti in both axial and radial directions using phase-sensitive Fourier domain optical coherence tomography. The apical turn in guinea pig cochlea has best frequencies around 100 - 500 Hz which are relevant for human speech. Prior measurements of vibrations in the guinea pig apex involved opening the otic capsule, which has been questioned on the basis of the resulting changes to cochlear hydrodynamics. Here this limitation is overcome by measuring the vibrations through bone without opening the otic capsule. Furthermore, we have significantly reduced the surgery needed to access the guinea pig apex in the axial direction by introducing a miniature mirror inside the bulla. The method and preliminary data are discussed in this article.

  3. Electro-optical switching of liquid crystals of graphene oxide

    Science.gov (United States)

    Song, Jang-Kun

    Electric field effects on aqueous graphene-oxide (GO) dispersions are reviewed in this chapter. In isotropic and biphasic regimes of GO dispersions, in which the inter-particle friction is low, GO particles sensitively respond to the application of electric field, producing field-induced optical birefringence. The electro-optical sensitivity dramatically decreases as the phase transits to the nematic phase; the increasing inter-particle friction hinders the rotational switching of GO particles. The corresponding Kerr coefficient reaches the maximum near the isotropic to biphasic transition concentration, at which the Kerr coefficient is found be c.a. 1:8 · 10-5 mV-2, the highest value ever reported in all Kerr materials. The exceptionally large Kerr effect arises from the Maxwell- Wagner polarization of GO particles with an extremely large aspect ratio and a thick electrical double layer (EDL). The polarization sensitively depends on the ratio of surface and bulk conductivities in dispersions. As a result, low ion concentration in bulk solvent is highly required to achieve a quality electro-optical switching in GO dispersions. Spontaneous vinylogous carboxylic reaction in GO particles produces H+ ions, resulting in spontaneous degradation of electro-optical response with time, hence the removal of residual ions by using a centrifuge cleaning process significantly improves the electro-optical sensitivity. GO particle size is another important parameter for the Kerr coefficient and the response time. The best performance is observed in a GO dispersion with c.a. 0.5 μm mean size. Dielectrophoretic migration of GO particles can be also used to manipulate GO particles in solution. Using these unique features of GO dispersions, one can fabricate GO liquid crystal devices similar to conventional liquid crystal displays; the large Kerr effect allows fabricating a low power device working at extremely low electric fields.

  4. Two-dimensional liquid chromatography

    DEFF Research Database (Denmark)

    Græsbøll, Rune

    Two-dimensional liquid chromatography has received increasing interest due to the rise in demand for analysis of complex chemical mixtures. Separation of complex mixtures is hard to achieve as a simple consequence of the sheer number of analytes, as these samples might contain hundreds or even...... dimensions. As a consequence of the conclusions made within this thesis, the research group has, for the time being, decided against further development of online LC×LC systems, since it was not deemed ideal for the intended application, the analysis of the polar fraction of oil. Trap-and...

  5. Study of Crosstalk propoerty in an Optical Packet Switching Node

    Institute of Scientific and Technical Information of China (English)

    王春华; 李力; 等

    2002-01-01

    The effect of queuing delay of output buffer on the crosstalk property in optical packel switching nodes in investigated.The relationship between crosstalk and buffer length is obtained.From the calculation and simulation results,it is concluded that the corsstalk power penalty predominantly depends on the buffer length,the longer the buffer,the greater the penalty,as well as the random range of the penalty.While comparing with the effect of queuing delay,the effect of random routing path delay takes very little proportion in the total power penalty.

  6. Optical switch phenomenon in a self-defocusing medium

    Institute of Scientific and Technical Information of China (English)

    Huagang Li; Zhihua Luo

    2009-01-01

    A spatial optical switch phenomenon caused by the induced focusing of a weak probe beam occurring in self-defocusing nonlinear media is discussed theoretically.A weak beam is induced to focus when it copropagates with an intense pump beam under the conditions that the probe and pump beams peak at different positions and propagate in different directions.Due to the effect of cross-phase modulation,the weak beam can not only be focused but also be deflected.The phenomenon is discussed by numerically solving the coupled amplitude equations.

  7. Picosecond all-optical switching in hydrogenated amorphous silicon microring resonators

    CERN Document Server

    Pelc, Jason S; Vo, Sonny; Santori, Charles; Fattal, David A; Beausoleil, Raymond G

    2014-01-01

    We utilize cross-phase modulation to observe all-optical switching in microring resonators fabricated with hydrogenated amorphous silicon (a-Si:H). Using 2.7-ps pulses from a mode-locked fiber laser in the telecom C-band, we observe optical switching of a cw telecom-band probe with full-width at half-maximum switching times of 14.8 ps, using approximately 720 fJ of energy deposited in the microring. In comparison with telecom-band optical switching in crystalline silicon microrings, a-Si:H exhibits substantially higher switching speeds due to reduced impact of free-carrier processes.

  8. Silicon photonic switch technology for optical networks in telecom and datacom areas

    Science.gov (United States)

    Nakamura, Shigeru; Yanagimachi, Shigeyuki; Takeshita, Hitoshi; Tajima, Akio

    2017-01-01

    As a promising platform technology for optical switches, silicon photonics is recently attracting much attention. In this paper, we demonstrate compact 8 × 8 silicon photonic switch modules with low loss, low polarization sensitivity, and low cross-talk properties. An optical circuit including 152 thermo-optical switch elements and spot size converters were formed within a silicon chip size of 12 mm × 14 mm. The developed module where a silicon photonic chip was assembled with a fiber array showed about 6-dB average excess optical loss, including optical coupling loss, on all 64 paths of the 8 × 8 optical switch. Measured polarization dependent loss was about 0.6 dB on average over 64 paths and cross-talk was less than -35 dB. These optical switch modules are intended for applying to ROADMs in telecom optical networks, but, the port count extensibility using multiple compact modules and the faster switching capability of the optical switch are also useful for datacenter applications where hybrid network scheme with electronic packet switches and optical circuit switches is intensively investigated.

  9. A NEW FAMILY OF TWO-DIMENSIONAL OPTICAL ORTHOGONAL CODES FOR MASSIVE OPTICAL CDMA NETWORKS%一种新的大容量的二维光正交码(英)

    Institute of Scientific and Technical Information of China (English)

    吉建华; 范戈

    2002-01-01

    A new one-dimensional optical orthogonal codes(1-D OOC) named extended hyperbolic line congruence codes(EHLC) is constructed,and its performance is analyzed.Compared with extended quadratic congruence codes(EQC),EHLC has large code cardinality,but has a little poor performances of auto-correlation and cross-correlation.Then,using EHLC for time spreading and prime sequence(PC) for wavelength hopping,a new two-dimensional optical orthogonal codes(2-D OOC)named EHLC/PC is constructed.Because the code weight of EHLC equals(p-1) and the code weight of PC equals p,selection function f(i) should be used to pick out(p-1)wavelengths from each prime sequence.At last,the performance of EHLC/PC is analyzed,and is also compared with EQC/PC.Because each wavelength within a code is different,auto-correlation of EHLC/PC equals zero.When examining the cross-correlation of EHLC/PC,authors should consider four different modes:same time spreading pattern/same wavelength hopping pattern(different sk),same time spreading pattern/different wavelength hopping pattern,different time spreading pattern/same wavelength hopping pattern,different time spreading pattern/different wavelenght hopping pattern.By using difference function and wavelength hopping pattern,it is not difficult to get the cross-correlation performances of EHLC/PC.It is shown that the cross-correlation performance of EHLC/PC is a little worse than EQC/PC,but EHLC/PC has much larger code cardinality.Moreover,EHLC/PC has shorter code length and smaller code weight,which can enhance user data rate and also can reduce the complexity of optical encoders/decoders.Therefore,EHLC/PC is suitable for massive optical code-division multiple-access(OCDMA) networks.%构造了一种扩展的双曲线性同余码(EHLC)并分析了其码字性能.用该码作为时间扩频伪随机序列和以素数码(PC)作为波长跳频伪随机序列,再构成一种新的二维光正交码EHLC/PC.然后分析了EHLC/PC码字的性能,并与EQC/PC

  10. Fast and low power Michelson interferometer thermo-optical switch on SOI.

    Science.gov (United States)

    Song, Junfeng; Fang, Q; Tao, S H; Liow, T Y; Yu, M B; Lo, G Q; Kwong, D L

    2008-09-29

    We designed and fabricated silicon-on-insulator based Michelson interferometer (MI) thermo-optical switches with deep etched trenches for heat-isolation. Switch power was reduced approximately 20% for the switch with deep etched trenches, and the MI saved approximately 50% power than that of the Mach-Zehnder interferometer. 10.6 mW switch power, approximately 42 micros switch time for the MI with deep trenches, 13.14 mW switch power and approximately 34 micros switch time for the MI without deep trenches were achieved.

  11. Two-dimensional capillary origami

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, N.D., E-mail: nbrubaker@math.arizona.edu; Lega, J., E-mail: lega@math.arizona.edu

    2016-01-08

    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid. - Highlights: • Full solution set of the two-dimensional capillary origami problem. • Fluid does not necessarily wet the entire plate. • Global energy approach provides exact differential equations satisfied by minimizers. • Bifurcation diagrams highlight three different regimes. • Conditions for spontaneous encapsulation are identified.

  12. Experimental demonstration of optical switching and routing via four-wave mixing spatial shift.

    Science.gov (United States)

    Nie, Zhiqiang; Zheng, Huaibin; Zhang, Yanpeng; Zhao, Yan; Zuo, Cuicui; Li, Changbiao; Chang, Hong; Xiao, Min

    2010-01-18

    We demonstrate the shift characteristics of four-wave mixing (FWM) beam spots which are controlled by the strong laser fields via the large cross-Kerr nonlinearity. The shift distances and directions are determined by the nonlinear dispersions. Based on such spatial displacements of the FWM beams, as well as the probe beam, we experimentally demonstrate spatial optical switching for one beam or multiple optical beams, which can be used for all-optical switching, switching arrays and routers.

  13. A single-stage optical load-balanced switch for data centers.

    Science.gov (United States)

    Huang, Qirui; Yeo, Yong-Kee; Zhou, Luying

    2012-10-22

    Load balancing is an attractive technique to achieve maximum throughput and optimal resource utilization in large-scale switching systems. However current electronic load-balanced switches suffer from severe problems in implementation cost, power consumption and scaling. To overcome these problems, in this paper we propose a single-stage optical load-balanced switch architecture based on an arrayed waveguide grating router (AWGR) in conjunction with fast tunable lasers. By reuse of the fast tunable lasers, the switch achieves both functions of load balancing and switching through the AWGR. With this architecture, proof-of-concept experiments have been conducted to investigate the feasibility of the optical load-balanced switch and to examine its physical performance. Compared to three-stage load-balanced switches, the reported switch needs only half of optical devices such as tunable lasers and AWGRs, which can provide a cost-effective solution for future data centers.

  14. Optically implemented broadband blueshift switch in the terahertz regime.

    Science.gov (United States)

    Shen, Nian-Hai; Massaouti, Maria; Gokkavas, Mutlu; Manceau, Jean-Michel; Ozbay, Ekmel; Kafesaki, Maria; Koschny, Thomas; Tzortzakis, Stelios; Soukoulis, Costas M

    2011-01-21

    We experimentally demonstrate, for the first time, an optically implemented blueshift tunable metamaterial in the terahertz (THz) regime. The design implies two potential resonance states, and the photoconductive semiconductor (silicon) settled in the critical region plays the role of intermediary for switching the resonator from mode 1 to mode 2. The observed tuning range of the fabricated device is as high as 26% (from 0.76 THz to 0.96 THz) through optical control to silicon. The realization of broadband blueshift tunable metamaterial offers opportunities for achieving switchable metamaterials with simultaneous redshift and blueshift tunability and cascade tunable devices. Our experimental approach is compatible with semiconductor technologies and can be used for other applications in the THz regime.

  15. Optically controlled multiple switching operations of DNA biopolymer devices

    Energy Technology Data Exchange (ETDEWEB)

    Hung, Chao-You; Tu, Waan-Ting; Lin, Yi-Tzu [Institute of Photonics Technologies, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Fruk, Ljiljana [Department of Chemical Engineering and Biotechnology, University of Cambridge, Pembroke Street, Cambridge CB2 3RA (United Kingdom); Hung, Yu-Chueh, E-mail: ychung@ee.nthu.edu.tw [Institute of Photonics Technologies, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Department of Electrical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2015-12-21

    We present optically tunable operations of deoxyribonucleic acid (DNA) biopolymer devices, where a single high-resistance state, write-once read-many-times memory state, write-read-erase memory state, and single low-resistance state can be achieved by controlling UV irradiation time. The device is a simple sandwich structure with a spin-coated DNA biopolymer layer sandwiched by two electrodes. Upon irradiation, the electrical properties of the device are adjusted owing to a phototriggered synthesis of silver nanoparticles in DNA biopolymer, giving rise to multiple switching scenarios. This technique, distinct from the strategy of doping of pre-formed nanoparticles, enables a post-film fabrication process for achieving optically controlled memory device operations, which provides a more versatile platform to fabricate organic memory and optoelectronic devices.

  16. Properties of Controllable Soliton Switching in Optical Lattices with Longitudinal Exponential-Asymptotic Modulation

    Institute of Scientific and Technical Information of China (English)

    ZHOU Jun; XUE Chun-Hua; QI Yi-Hong; LOU Sen-Yue

    2008-01-01

    The properties of controllable soliton switching in Kerr-type optical lattices with different modulation are investigated theoretically and simulated numerically. The results show that the optical lattices can be available for all-optical soliton switching through utilization for length-scale competition effects. And through longitudinal exponential-asymptotic modulation for the linear refractive index, the properties of soliton switching in the optical lattices can be improved. The number of output channels of soliton switching can be controlled by the parameters such as incident angle, asymptotic rate of longitudinal modulation, guiding parameter and form factor.

  17. Two-dimensional quantum repeaters

    Science.gov (United States)

    Wallnöfer, J.; Zwerger, M.; Muschik, C.; Sangouard, N.; Dür, W.

    2016-11-01

    The endeavor to develop quantum networks gave rise to a rapidly developing field with far-reaching applications such as secure communication and the realization of distributed computing tasks. This ultimately calls for the creation of flexible multiuser structures that allow for quantum communication between arbitrary pairs of parties in the network and facilitate also multiuser applications. To address this challenge, we propose a two-dimensional quantum repeater architecture to establish long-distance entanglement shared between multiple communication partners in the presence of channel noise and imperfect local control operations. The scheme is based on the creation of self-similar multiqubit entanglement structures at growing scale, where variants of entanglement swapping and multiparty entanglement purification are combined to create high-fidelity entangled states. We show how such networks can be implemented using trapped ions in cavities.

  18. Two-dimensional capillary origami

    Science.gov (United States)

    Brubaker, N. D.; Lega, J.

    2016-01-01

    We describe a global approach to the problem of capillary origami that captures all unfolded equilibrium configurations in the two-dimensional setting where the drop is not required to fully wet the flexible plate. We provide bifurcation diagrams showing the level of encapsulation of each equilibrium configuration as a function of the volume of liquid that it contains, as well as plots representing the energy of each equilibrium branch. These diagrams indicate at what volume level the liquid drop ceases to be attached to the endpoints of the plate, which depends on the value of the contact angle. As in the case of pinned contact points, three different parameter regimes are identified, one of which predicts instantaneous encapsulation for small initial volumes of liquid.

  19. Two-dimensional cubic convolution.

    Science.gov (United States)

    Reichenbach, Stephen E; Geng, Frank

    2003-01-01

    The paper develops two-dimensional (2D), nonseparable, piecewise cubic convolution (PCC) for image interpolation. Traditionally, PCC has been implemented based on a one-dimensional (1D) derivation with a separable generalization to two dimensions. However, typical scenes and imaging systems are not separable, so the traditional approach is suboptimal. We develop a closed-form derivation for a two-parameter, 2D PCC kernel with support [-2,2] x [-2,2] that is constrained for continuity, smoothness, symmetry, and flat-field response. Our analyses, using several image models, including Markov random fields, demonstrate that the 2D PCC yields small improvements in interpolation fidelity over the traditional, separable approach. The constraints on the derivation can be relaxed to provide greater flexibility and performance.

  20. Technology of optical switch in all optical communication%全光通信中的光开关技术

    Institute of Scientific and Technical Information of China (English)

    李红春; 赵巧霞; 陶晓燕; 王豆豆

    2011-01-01

    Optical switch is the kernel device of all optical switchingCurrently the study on optical switch has become the focus of all optical communication. This paper summarized the principle of optical switch, analyzed the application of optical switch. The traditional mechanical, micro electro-mechanical system (MEMS) and thermo-optic switch were further divided, and their characteristics were pointed out. Then an evaluation system was put forward for optical switch assessment, by comparing the qualitative and quantitative of the four common optical switches,the advatnges and inadequacics of different types of optical switches were pointed out. Finauy,according to the trend of all optical communication, the large-scale array, high speed, transparent and low loss optical switch is the key development of direction.%光开关是实现全光交换的核心器件,光开关的研究已成为全光通信领域研究的焦点.本文首先对光开关的原理进行归纳,总结光开关的应用范围.对传统机械式光开关、微电子机械式光开关、热光开关进行了进一步地划分,分析了它们的结构形式和性能特点.设计了光开关性能评价指标体系,对常见的4种光开关进行了定性与定量对比,指出不同类型光开关的优点和不足之处.最后依据全光通信网的发展趋势,指出大容童、高速、透明、低损耗是光开关的重点发展方向.

  1. Research progresses of SOI optical waveguide devices and integrated optical switch matrix

    Institute of Scientific and Technical Information of China (English)

    YU Jinzhong; CHEN Shaowu; XIA Jinsong; WANG Zhangtao; FAN Zhongchao; LI Yanping; LIU Jingwei; YANG Di; CHEN Yuanyuan

    2005-01-01

    SOI (silicon-on-insulator) is a new material with a lot of important perform- ances such as large index difference, low transmission loss. Fabrication processes for SOI based optoelectronic devices are compatible with conventional IC processes. Having the potential of OEIC monolithic integration, SOI based optoelectronic devices have shown many good characteristics and become more and more attractive recently. In this paper, the recent progresses of SOI waveguide devices in our research group are presented. By highly effective numerical simulation, the single mode conditions for SOI rib waveguides with rectangular and trapezoidal cross-section were accurately investigated. Using both chemical anisotropic wet etching and plasma dry etching techniques, SOI single mode rib waveguide, MMI coupler, VOA (variable optical attenuator), 2×2 thermal-optical switch were successfully designed and fabricated. Based on these, 4×4 and 8×8 SOI optical waveguide integrated switch matrixes are demonstrated for the first time.

  2. Ultrafast Nyquist OTDM demultiplexing using optical Nyquist pulse sampling in an all-optical nonlinear switch.

    Science.gov (United States)

    Hirooka, Toshihiko; Seya, Daiki; Harako, Koudai; Suzuki, Daiki; Nakazawa, Masataka

    2015-08-10

    We propose the ultrahigh-speed demultiplexing of Nyquist OTDM signals using an optical Nyquist pulse as both a signal and a sampling pulse in an all-optical nonlinear switch. The narrow spectral width of the Nyquist pulses means that the spectral overlap between data and control pulses is greatly reduced, and the control pulse itself can be made more tolerant to dispersion and nonlinear distortions inside the nonlinear switch. We apply the Nyquist control pulse to the 640 to 40 Gbaud demultiplexing of DPSK and DQPSK signals using a nonlinear optical loop mirror (NOLM), and demonstrate a large performance improvement compared with conventional Gaussian control pulses. We also show that the optimum spectral profile of the Nyquist control pulse depends on the walk-off property of the NOLM.

  3. The cascaded amplifier and saturable absorber (CASA) all-optical switch

    DEFF Research Database (Denmark)

    Hilliger, E.; Berger, J.; Weber, H. G.

    2001-01-01

    The cascaded amplifier and saturable absorber is presented as a new all-optical switching scheme for optical signal processing applications. First demultiplexing experiments demonstrate the principle of operation of this scheme....

  4. Monolithic, High-Speed Fiber-Optic Switching Array for Lidar Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This NASA SBIR Phase II effort will develop a 1 x 10 prototype non-mechanical fiber optic switch for use with high power lasers. The proposed optical device is a...

  5. MEMS Torsion-Mirror Actuators for Optical Switching or Attenuating Applications

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Novel MEMS torsion-mirror actuators with monolithically integrated fiber self-holding structures are fabricated, and investigated experimentally and theoretically. Their electromechanical and optical characteristics are acceptable for optical switching or attenuating applications.

  6. The cascaded amplifier and saturable absorber (CASA) all-optical switch

    DEFF Research Database (Denmark)

    Hilliger, E.; Berger, J.; Weber, H. G.

    2001-01-01

    The cascaded amplifier and saturable absorber is presented as a new all-optical switching scheme for optical signal processing applications. First demultiplexing experiments demonstrate the principle of operation of this scheme....

  7. Hybrid Wavelength Routed and Optical Packet Switched Ring Networks for the Metropolitan Area Network

    DEFF Research Database (Denmark)

    Nord, Martin

    2005-01-01

    Increased data traffic in the metropolitan area network calls for new network architectures. This paper evaluates optical ring architectures based on optical packet switching, wavelength routing, and hybrid combinations of the two concepts. The evaluation includes overall throughput and fairness...

  8. Optimization of Waveguide Structure for Tunable Optical Switch in Si/SiGe System

    Institute of Scientific and Technical Information of China (English)

    Seongjae Boo; Won-Taek Han

    2003-01-01

    A new electro-optical device using Si/SiGe-system with two parallel ridge waveguides is proposed for optical switching and the optimization of the structure for a single mode operation is investigated.

  9. Preparation, thermo-optic property and simulation of optical switch based on azo benzothiazole polymer

    Science.gov (United States)

    Cao, Zhijuan; Qiu, Fengxian; Wang, Qing; Cao, Guorong; Guan, Yijun; Zhuang, Lin; Xu, Xiaolong; Wang, Jie; Chen, Qian; Yang, Dongya

    2013-04-01

    An azo chromophore molecule 4-[(benzothiazole-2-yl)diazenyl]phenyl-1,3-diamine (BTPD) was prepared with 2-amino benzothiazole and m-phenylenediamine by diazo-coupling reaction. Then, the chromophore molecule BTPD was polymerized with NJ-210 and isophorone diisocyanate (IPDI) to obtain novel azo benzothiazole polymer (BTPU). The structures of BTPD and BTPU were characterized using the Fourier transform infrared, UV-visible spectroscopy, DSC and TGA. The physical properties of the obtained BTPU were investigated. The refractive index ( n) of BTPU was demonstrated at different temperature and wavelength (532, 650 and 850 nm) using attenuated total reflection technique. The transmission loss and dispersion characteristic of BTPU film were investigated using the CCD digital imaging devices and Sellmeyer equation. A Y-branch and 2 × 2 Mach-Zehnder interferometer (MZI) polymeric thermo-optic switches based on the thermo-optic effect of prepared BTPU were proposed and the performance of switches was simulated. The results indicated that the power consumption of the Y-branch thermo-optic switch could be only 0.6 mW. The Y-branch and MZI switching rising and falling times obtained were 8.0 and 1.8 ms.

  10. Two-dimensional electromagnetically induced cross-grating in a four-level N-type atomic system

    Science.gov (United States)

    Wu, Jianchun; Ai, Baoquan

    2015-06-01

    We propose a scheme for a two-dimensional (2D) electromagnetically induced cross-grating (EICG) in a four-level N-type atomic system. By employing standing-wave fields interacting with the atomic system, the absorption and dispersion of the probe field will change with the spatial periodical modulation. The first-order diffraction intensity sensitively depends on the parameters (the probe detuning, and the amplitude and detuning of the standing-wave fields), and can reach its maximum on varying the system parameters. The present studies may be instructive to design new devices in all-optical switching and optical imaging.

  11. High-speed 2×2 silicon-based electro-optic switch with nanosecond switch time

    Institute of Scientific and Technical Information of China (English)

    Xu Xue-Jun; Chen Shao-Wu; Xu Hai-Hua; Sun Yang; Yu Yu-De; Yu Jin-Zhong; Wang Qi-Ming

    2009-01-01

    A 2 × 2 electro-optic switch is experimentally demonstrated using the optical structure of a Mach-Zehnder interferometer (MZI) based on a submicron rib waveguide and the electrical structure of a PIN diode on silicon-on-insulator (SOI). The switch behaviour is achieved through the plasma dispersion effect of silicon. The device has a modulation arm of 1 mm in length and cross-section of 400 nm×340 nm. The measurement results show that the switch has a VπLπ figure of merit of 0.145 V.cm and the extinction ratios of two output ports and cross talk are 40 dB,28 dB and -28 dB,respectively. A 3 dB modulation bandwidth of 90 MHz and a switch time of 6.8 ns for the rise edge and 2.7 ns for the fall edge axe also demonstrated.

  12. SOI-Based 16×16 Thermo-Optic Waveguide Switch Matrix

    Institute of Scientific and Technical Information of China (English)

    CHEN Yuan-Yuan; LI Yan-Ping; SUN Fei; YANG Di; CHEN Shao-Wu; YU Jin-Zhong

    2006-01-01

    @@ A 16 × 16 thermo-optic waveguide switch matrix has been designed and fabricated on silicon-on-insulator wafer.For reducing device length, blocking switch matrix configuration is chosen. The building block of the matrix is a 2 × 2 switch cell with a Mach-Zehnder interferometer configuration, where a multi-mode interferometer serves as splitter/combiners. Spot size converters and isolating grooves are integrated on the same chip to reduce loss and power consumption. Average power consumption of the switch cell is 220mW. The switching time of a switch cell is less than 3 μs.

  13. Coherent all-optical switching in a bistable waveguide-cavity-waveguide system

    DEFF Research Database (Denmark)

    Kristensen, Philip Trøst; Heuck, Mikkel; Mørk, Jesper

    2011-01-01

    All optical switching based on non-linear material effects is a promising technique for use in future optical communication systems. Promising advances in the field has been achieved using optical microcavities in photonic crystals to increase the optical field strength and hence reduce...... the required power of the input field [1]. In this work we consider an alternative method of switching, in which the input power is kept constant and only the phase of the input field is varied....

  14. High bandwidth all-optical 3×3 switch based on multimode interference structures

    Science.gov (United States)

    Le, Duy-Tien; Truong, Cao-Dung; Le, Trung-Thanh

    2017-03-01

    A high bandwidth all-optical 3×3 switch based on general interference multimode interference (GI-MMI) structure is proposed in this study. Two 3×3 multimode interference couplers are cascaded to realize an all-optical switch operating at both wavelengths of 1550 nm and 1310 nm. Two nonlinear directional couplers at two outer-arms of the structure are used as all-optical phase shifters to achieve all switching states and to control the switching states. Analytical expressions for switching operation using the transfer matrix method are presented. The beam propagation method (BPM) is used to design and optimize the whole structure. The optimal design of the all-optical phase shifters and 3×3 MMI couplers are carried out to reduce the switching power and loss.

  15. Universal method for constructing N-port non-blocking optical router based on 2 × 2 optical switch for photonic networks-on-chip.

    Science.gov (United States)

    Chen, Qiaoshan; Zhang, Fanfan; Ji, Ruiqiang; Zhang, Lei; Yang, Lin

    2014-05-19

    We propose a universal method for constructing N-port non-blocking optical router for photonic networks-on-chip, in which all microring (MR) optical switches or Mach-Zehnder (M-Z) optical switches behave as 2 × 2 optical switches. The optical router constructed by the proposed method has minimum optical switches, in which the number of the optical switches is reduced about 50% compared to the reported optical routers based on MR optical switches and more than 30% compared to the reported optical routers based on M-Z optical switches, and therefore is more compact in footprint and more power-efficient. We also present a strict mathematical proof of the non-blocking routing of the proposed N-port optical router.

  16. Magnetostrictive Micro Mirrors for an Optical Switch Matrix

    Directory of Open Access Journals (Sweden)

    Myeong-Woo Cho

    2007-10-01

    Full Text Available We have developed a wireless-controlled compact optical switch by siliconmicromachining techniques with DC magnetron sputtering. For the optical switchingoperation, micro mirror is designed as cantilever shape size of 5mm×800μm×50μm.TbDyFe film is sputter-deposited on the upper side of the mirror with the condition as: Argas pressure below 1.2×10-9 torr, DC input power of 180W and heating temperature of up to250°C for the wireless control of each component. Mirrors are actuated by externallyapplied magnetic fields for the micro application. Applied beam path can be changedaccording to the direction and the magnitude of applied magnetic field. Reflectivity changes,M-H curves and X-ray diffractions of sputtered mirrors are measured to determine magneto-optical, magneto-elastic properties with variation in sputtered film thickness. The deflectedangle-magnetic field characteristics of the fabricated mirror are measured.

  17. Performance analysis of optical multicast in a new switching structure

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The emergence of new services demands multicast function in optical network.Because of the high cost and complex architecture of multicast capable (MC) node, splitter-sharing switch structure is introduced in which the light splitters are shared by all input signals.To accommodate to this situation, by extending resource ReSerVation protocol-traffic engineering (RSVP-TE) and open shortest path first-traffic engineering (OSPF-TE), a new optical multicast mechanism is provided and the signaling flow and its finite state machine model are given.At the same time, a multicast routing algorithm in splitter-sharing optical network and a changing link weight policy to balance network traffic are proposed.Simulations in NSFNET show no matter with or without wavelength converters, when the number of splitters is 25% of that demanded by traditional MC nodes, the multicast performance has been close to the ideal circumstance.Wavelength converters and changing link weight help much in improving the traffic performance when the number of splitters is adequate.

  18. Cascaded transformerless DC-DC voltage amplifier with optically isolated switching devices

    Science.gov (United States)

    Sridharan, Govind (Inventor)

    1993-01-01

    A very high voltage amplifier is provided in which plural cascaded banks of capacitors are switched by optically isolated control switches so as to be charged in parallel from the preceding stage or capacitor bank and to discharge in series to the succeeding stage or capacitor bank in alternating control cycles. The optically isolated control switches are controlled by a logic controller whose power supply is virtually immune to interference from the very high voltage output of the amplifier by the optical isolation provided by the switches, so that a very high voltage amplification ratio may be attained using many capacitor banks in cascade.

  19. A Novel Model of Resolving Contention in Optical Burst Switched Networks

    Institute of Scientific and Technical Information of China (English)

    Huang Anpeng(黄安鹏); Xie Linzhen; Li Jingcong; Li Zhengbin; Xu Anshi

    2004-01-01

    A Novel segmentation and feedback model (SFM) applied to resolve collision has been proposed. The SFM is featured with Burst Segmentation and Prioritized Feedback (BSPF) that are used to provide quality of service (QoS) and realize high throughput and faster switching in the optical burst switched networks. Simulation and performance analyses show that the SFM effectively avoid collision in optical burst switching (OBS). Long delay time of deflection routing and immature technology of wavelength converter and optical buffer are not employed in the SFM. The SFM not only realizes quick switching but also allows preemption for higher priority bursts.

  20. Proposal for all-optical controllable switch using dipole induced transparency (DIT)

    Science.gov (United States)

    Eftekhari, K.; Abbasian, K.; Rostami, A.

    2010-05-01

    We propose a novel all-optical controllable switch using photonic crystal cavity. For doing this work, the dipole induced transparency phenomenon realized through interaction of light with multilevel nanocrystals is used. Multilevel nanocrystals are doped to photonic crystal rods. Using the proposed structure and applying the control field, the absorbing medium converts to transparent one and switching operation is obtained. Analytical relation for evaluation of the proposed device considering quantum optical effects is presented and studied by investigation of effects of parameters on switching characteristics. We show that high quality all-optical switching operation can be obtained.

  1. Classifying Two-dimensional Hyporeductive Triple Algebras

    CERN Document Server

    Issa, A Nourou

    2010-01-01

    Two-dimensional real hyporeductive triple algebras (h.t.a.) are investigated. A classification of such algebras is presented. As a consequence, a classification of two-dimensional real Lie triple algebras (i.e. generalized Lie triple systems) and two-dimensional real Bol algebras is given.

  2. Research of Asymmetric Y-Branching Total Internal Reflection All-Optical Switch

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Y-branching TIR all-optical switch have been fabricated. When the switching optical intensity is 149.9W/mm2, the extinction ratio is 18dB. A theoretical model was also proposed which provided a good fit to the experimental data.

  3. Enhanced Thermo-Optical Switching of Paraffin-Wax Composite Spots under Laser Heating

    National Research Council Canada - National Science Library

    Asmaa Said; Abeer Salah; Gamal Abdel Fattah

    2017-01-01

    ..., and a novel structure based on spot of paraffin wax as a thermo-optic switch is presented. Thermo-optical switching parameters are enhanced with the addition of graphite and graphene, due to the extreme thermal conductivity of the carbon fillers...

  4. Enhanced all-optical switching by use of a nonlinear fiber ring resonator.

    Science.gov (United States)

    Heebner, J E; Boyd, R W

    1999-06-15

    We predict dramatically reduced switching thresholds for nonlinear optical devices incorporating fiber ring resonators. The circulating power in such a resonator is much larger than the incident power; also, the phase of the transmitted light varies rapidly with the single-pass phase shift. The combined action of these effects leads to a finesse-squared reduction in the switching threshold, allowing for photonic switching devices that operate at milliwatt power levels in ordinary optical fibers.

  5. Compact Hybrid Subsystem of 16 Channel Optical Demultiplexer, 2x2 Switches, Optical Power Monitors and Control Circuit

    Institute of Scientific and Technical Information of China (English)

    Kenichiro Takahashi; Toshihiko Kishimoto; Shintaro Mouri; Youichi Hata; Hideaki Yusa; Mitsuaki Tamura; Kazuhito Saito; Hisao Maki

    2003-01-01

    A compact hybrid subsystem of 16channel optical demultiplexer, 2x2 switches, optical power monitors and control circuit board is developed. The subsystem is able to add or drop arbitrary optical channels and monitor the optical power level by software commands. The size of the subsystem is 170x200x30(mm).

  6. A Novel All-Optical Switch in a Double-Loop Sagnac Ring Coupled with a Nonlinear Ring Resonator

    Institute of Scientific and Technical Information of China (English)

    LI Jun-Qing; LI Li; ZHAO Jia-Qun; LI Chun-Fei

    2004-01-01

    @@ We propose a novel configuration of all-optical switch based on a double-loop Sagnac ring coupled with a nonlinear ring resonator. In the case of self-phase modulation, the reducing switching threshold power down to mW is predicted, which is the improvement of earlier works on all-optical switches. The switch optimization is analysed.A way to increase the response speed of all-optical switches is suggested.

  7. Two-dimensional function photonic crystals

    CERN Document Server

    Wu, Xiang-Yao; Liu, Xiao-Jing; Liang, Yu

    2016-01-01

    In this paper, we have firstly proposed two-dimensional function photonic crystals, which the dielectric constants of medium columns are the functions of space coordinates $\\vec{r}$, it is different from the two-dimensional conventional photonic crystals constituting by the medium columns of dielectric constants are constants. We find the band gaps of two-dimensional function photonic crystals are different from the two-dimensional conventional photonic crystals, and when the functions form of dielectric constants are different, the band gaps structure should be changed, which can be designed into the appropriate band gaps structures by the two-dimensional function photonic crystals.

  8. Nonlinear optical properties of Au-Ag core-shell nanorods for all-optical switching

    Science.gov (United States)

    Zhang, Luman; Dai, Hongwei; Wang, Xia; Yao, Linhua; Ma, Zongwei; Han, Jun-Bo

    2017-09-01

    Au-Ag core-shell nanorods with surface plasmon resonance wavelengths of 760-840 nm were prepared. Wavelength-dependent nonlinear absorption coefficients (β) and nonlinear refractive indices (γ) of the nanorods were measured by using Z-scan techniques. The corresponding one-photon and two-photon figures of merit (W and T) were calculated from β and γ. The results show that the requirements of W  >  1 and T  <  1 for the application of all-optical switching could be achieved for all the samples over a broad wavelength range. These observations make the Au-Ag core-shell nanorods a good candidate for all-optical switching devices.

  9. Thermo-optically tunable switching in an electro-microtube ring resonator

    Science.gov (United States)

    Zeng, Jing; Zhu, Tao; Deng, Ming

    2015-07-01

    We propose a tunable optical switching based on thermo-optic nonlinear effect in an electro-microtube ring resonator (EMRR) made by a capillary embedded with a heating wire. The significant modes shift in the EMRR for nonlinear switching are attributed to a huge joule heat generated by the heating wire, leading to the resonant wavelength shifts over 0.9nm when using 250mA current. In our viewpoints, with such a significant performance, the EMRR may be practically applied to switching, optical filter, sensing and optical network process.

  10. A cross-stacked plasmonic nanowire network for high-contrast femtosecond optical switching

    Science.gov (United States)

    Lin, Yuanhai; Zhang, Xinping; Fang, Xiaohui; Liang, Shuyan

    2016-01-01

    We report an ultrafast optical switching device constructed by stacking two layers of gold nanowires into a perpendicularly crossed network, which works at a speed faster than 280 fs with an on/off modulation depth of about 22.4%. The two stacks play different roles in enhancing consistently the optical switching performance due to their different dependence on the polarization of optical electric fields. The cross-plasmon resonance based on the interaction between the perpendicularly stacked gold nanowires and its Fano-coupling with Rayleigh anomaly is the dominant mechanism for such a high-contrast optical switching device.

  11. A vertically-coupled liquid-crystal long-range plasmonic optical switch

    CERN Document Server

    Zografopoulos, Dimitrios C

    2012-01-01

    An optical switch based on liquid-crystal tunable long-range metal stripe waveguides is proposed and theoretically investigated. A nematic liquid crystal layer placed between a vertical configuration consisting of two gold stripes is shown to allow for the extensive electro-optic tuning of the coupler's waveguiding characteristics. Rigorous liquid-crystal switching studies are coupled with the investigation of the optical properties of the proposed plasmonic structure, taking into account different excitation conditions and the impact of LC-scattering losses. A directional coupler optical switch is demonstrated, which combines low power consumption, low cross-talk, short coupling lengths, along with sufficiently reduced insertion losses.

  12. Optical Switching for Dynamic Distribution of Wireless-over-Fiber Signals

    DEFF Research Database (Denmark)

    Rodes Lopez, Guillermo Arturo; Vegas Olmos, Juan José; Karinou, Fotini;

    2012-01-01

    In this paper, we report on an experimental validation of dynamic distribution of wireless-over-fiber by employing optical switching using semiconductor optical amplifiers; the rest of the network was designed according to the channel distribution over the optical spectra required by the optical...

  13. Laser Trimming for Adjustment of Grating Offset in Phase-Shifted Fiber Grating Coupler for All-Optical Switching Application

    Institute of Scientific and Technical Information of China (English)

    Hirohisa; Yokota; Yutaka; Sasaki

    2003-01-01

    We theoretically investigated laser trimming to adjust grating offset in phase-shifted fiber grating coupler (FGC) for all-optical switching application. It was clarified that the trimming made the extinction ratio higher in all-optical FGC switch.

  14. All optical contention detection and resolution for asynchronous variable length optical packets switching

    Science.gov (United States)

    Farhat, Rim; Farhat, Amel; Menif, Mourad

    2016-04-01

    We proposed a novel 2×2 all optical packet switching router architecture supporting asynchronous, labelled and variablelength packet. A proof of concept through Matlab Simulink simulation is validated. Then we discussed the three possible scenarios to demonstrate the contention resolution technique based on deflection routing. We have showing that the contending packet is detected and forwarded according FIFO (First In First Out) strategy to another output.

  15. Electron and electron-phonon effects in quasi-two-dimensional molecular conductor theta-(BETS) sub 4 HgBr sub 4 (C sub 6 H sub 5 Cl): optical investigations at 300-15 K

    CERN Document Server

    Vlasova, R M; Petrov, B V; Semkin, N D; Zhilyaeva, E I; Bogdanova, O A; Lyubovskaya, R N; Graja, A

    2002-01-01

    One studied the polarized spectra of reflection and spectra of optical transmission of theta-(BETS) sub 4 HgBr sub 4 (C sub 6 H sub 5 Cl) quasi-two-dimensional molecular conductor within 700-6500 cm sup - sup 1 range under 300-15 K temperatures and within 9000-40000 cm sup - sup 1 under 300 K for two principal directions within crystal plane parallel to conducting layers of BETS molecules. Under 300 K within IR region the spectra are characterized by the intensive essential peculiarities (1200-1400 cm sup - sup 1) caused by electron-oscillation coupling (EOC). At temperature drop within 180-80 K range one observes in the spectra a Lorentz term with omega sub t = 2900 cm sup - sup 1 and three extra bands within 800-1180 cm sup - sup 1 region caused by EOC. The derived results are indicative of unstable structural distortions along two principal directions in a crystal followed by formation of a charge density comparable wave

  16. In situ orientation studies of a poly(3-hydroxybutyrate)/poly(epsilon-caprolactone) blend by rheo-optical fourier transform infrared spectroscopy and two-dimensional correlation spectroscopic analysis.

    Science.gov (United States)

    Unger, Miriam; Siesler, Heinz W

    2009-12-01

    In the present study, the orientation of a poly(3-hydroxybutyrate) (PHB)/poly(epsilon-caprolactone) (PCL) blend was monitored during uniaxial elongation by rheo-optical Fourier transform infrared (FT-IR) spectroscopy and analyzed by generalized two-dimensional correlation spectroscopy (2D-COS). The dichroism of the delta(CH(2)) absorption bands of PHB and PCL was employed to determine the polymer chain orientation in the PHB/PCL blend during the elongation up to 267% strain. From the PHB and PCL specific orientation functions it was derived that the PCL chains orient into the drawing direction while the PHB chains orient predominantly perpendicular to the applied strain. To extract more detailed information about the polymer orientation during uniaxial elongation, 2D-COS analysis was employed for the dichroic difference of the polarization spectra recorded during the drawing process. In the corresponding synchronous and asynchronous 2D correlation plots, absorption bands characteristic of the crystalline and amorphous regions of PHB and PCL were separated. Furthermore, the 2D-COS analysis revealed that during the mechanical treatment the PCL domains orient before the PHB domains.

  17. All-optical encryption based on interleaved waveband switching modulation for optical network security.

    Science.gov (United States)

    Fok, Mable P; Prucnal, Paul R

    2009-05-01

    All-optical encryption for optical code-division multiple-access systems with interleaved waveband-switching modulation is experimentally demonstrated. The scheme explores dual-pump four-wave mixing in a 35 cm highly nonlinear bismuth oxide fiber to achieve XOR operation of the plaintext and the encryption key. Bit 0 and bit 1 of the encrypted data are represented by two different wavebands. Unlike on-off keying encryption methods, the encrypted data in this approach has the same intensity for both bit 0 and bit 1. Thus no plaintext or ciphertext signatures are observed.

  18. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides.

    Science.gov (United States)

    Wang, Qing Hua; Kalantar-Zadeh, Kourosh; Kis, Andras; Coleman, Jonathan N; Strano, Michael S

    2012-11-01

    The remarkable properties of graphene have renewed interest in inorganic, two-dimensional materials with unique electronic and optical attributes. Transition metal dichalcogenides (TMDCs) are layered materials with strong in-plane bonding and weak out-of-plane interactions enabling exfoliation into two-dimensional layers of single unit cell thickness. Although TMDCs have been studied for decades, recent advances in nanoscale materials characterization and device fabrication have opened up new opportunities for two-dimensional layers of thin TMDCs in nanoelectronics and optoelectronics. TMDCs such as MoS(2), MoSe(2), WS(2) and WSe(2) have sizable bandgaps that change from indirect to direct in single layers, allowing applications such as transistors, photodetectors and electroluminescent devices. We review the historical development of TMDCs, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.

  19. Field trial of 160 Gb/s all-optical packet switching

    Science.gov (United States)

    Liu, Y.; Herrera, J.; Raz, O.; Tangdiongga, E.; Marti, J.; Ramos, F.; Maxwell, G.; Poustie, A.; Mulvad, H. C. H.; Hill, M. T.; de Waardt, H.; Khoe, G. D.; Koonen, A. M. J.; Dorren, H. J. S.

    2007-11-01

    We present the results of a transmission experiment, over 110 km of field installed fiber, for an all-optical 160 Gb/s packet switching system. The system uses in-band optical labels which are processed entirely in the optical domain using a narrow-band all-optical filter. The label decision information is stored by an optical flip-flop, which output controls a high-speed wavelength converter based on ultra-fast cross-phase modulation in a single semiconductor optical amplifier. The packet switched node is located in between two different fiber sections, each having a length of 54.3-km. The field installed fibers are located around the city of Eindhoven in the Netherlands. The results show how the all-optical switch can effectively route the packets based on the optical information and that such packets may be transmitted across the fiber with an acceptable penalty level.

  20. Patterning Effects in Ultrafast All-Optical Photonic Crystal Nanocavity Switches

    DEFF Research Database (Denmark)

    Heuck, Mikkel; Kristensen, Philip Trøst; Mørk, Jesper

    2011-01-01

    All-optical switches are expected to play a key role in increasing the bandwidth of future communication networks by replacing slower electronic components for certain signal processing tasks. Previous work has demonstrated the possibility of switching a single pulse [1,2]. However, a more...... realistic investigation of the switching performance requires longer random pulse sequences, since detrimental effects may accumulate over time scales longer than one pulse duration. This has been investigated for switches based on semiconductor optical amplifiers [3], but in this work the focus...

  1. Photodetectors based on two dimensional materials

    Science.gov (United States)

    Zheng, Lou; Zhongzhu, Liang; Guozhen, Shen

    2016-09-01

    Two-dimensional (2D) materials with unique properties have received a great deal of attention in recent years. This family of materials has rapidly established themselves as intriguing building blocks for versatile nanoelectronic devices that offer promising potential for use in next generation optoelectronics, such as photodetectors. Furthermore, their optoelectronic performance can be adjusted by varying the number of layers. They have demonstrated excellent light absorption, enabling ultrafast and ultrasensitive detection of light in photodetectors, especially in their single-layer structure. Moreover, due to their atomic thickness, outstanding mechanical flexibility, and large breaking strength, these materials have been of great interest for use in flexible devices and strain engineering. Toward that end, several kinds of photodetectors based on 2D materials have been reported. Here, we present a review of the state-of-the-art in photodetectors based on graphene and other 2D materials, such as the graphene, transition metal dichalcogenides, and so on. Project supported by the National Natural Science Foundation of China (Nos. 61377033, 61574132, 61504136) and the State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences.

  2. Torque magnetometry studies of two-dimensional electron systems

    NARCIS (Netherlands)

    Schaapman, Maaike Ruth

    2004-01-01

    This thesis describes a study of the magnetization two-dimensional electron gases (2DEGs). To detect the typically small magnetization, a sensitive magnetometer with optical angular detection was developed. The magnetometer uses a quadrant detector to measure the rotation of the sample. By mounting

  3. Torque magnetometry studies of two-dimensional electron systems

    NARCIS (Netherlands)

    Schaapman, Maaike Ruth

    2004-01-01

    This thesis describes a study of the magnetization two-dimensional electron gases (2DEGs). To detect the typically small magnetization, a sensitive magnetometer with optical angular detection was developed. The magnetometer uses a quadrant detector to measure the rotation of the sample. By mounting

  4. Hadamard States and Two-dimensional Gravity

    CERN Document Server

    Salehi, H

    2001-01-01

    We have used a two-dimensional analog of the Hadamard state-condition to study the local constraints on the two-point function of a linear quantum field conformally coupled to a two-dimensional gravitational background. We develop a dynamical model in which the determination of the state of the quantum field is essentially related to the determination of a conformal frame. A particular conformal frame is then introduced in which a two-dimensional gravitational equation is established.

  5. Topological defects in two-dimensional crystals

    OpenAIRE

    Chen, Yong; Qi, Wei-Kai

    2008-01-01

    By using topological current theory, we study the inner topological structure of the topological defects in two-dimensional (2D) crystal. We find that there are two elementary point defects topological current in two-dimensional crystal, one for dislocations and the other for disclinations. The topological quantization and evolution of topological defects in two-dimensional crystals are discussed. Finally, We compare our theory with Brownian-dynamics simulations in 2D Yukawa systems.

  6. Continuous wave terahertz spectroscopy system with stably tunable beat source using optical switch

    Science.gov (United States)

    Eom, Joo Beom; Kim, Chihoon; Ahn, Jaesung

    2017-01-01

    A tunable beat source has been made using an optical switch module. A stably-tunable beat source for continuous wave terahertz spectroscopy system was implemented by simply connecting 16 coaxial distributed feedback laser diodes to an optical switch. The terahertz frequency was rapidly changed without frequency drifts by changing the optical path. The continuous wave terahertz frequency was tuned from 0.05 to 0.8 THz in steps of 50 GHz or 0.4 nm. We measured continuous wave terahertz waveforms emitted from the photomixers using the switched optical beat source. We also calculated the terahertz frequency peaks by taking fast Fourier transforms of the measured terahertz waveforms. By equipping the implemented tunable beat source with an optical switch, a continuous wave terahertz spectroscopy system was constructed and used to demonstrate the feasibility of continuous wave terahertz spectroscopy for nondestructive tests using the spectra of two type of Si wafers with different resistivity.

  7. Enhanced Thermo-Optical Switching of Paraffin-Wax Composite Spots under Laser Heating

    Science.gov (United States)

    Said, Asmaa; Salah, Abeer; Abdel Fattah, Gamal

    2017-01-01

    Thermo-optical switches are of particular significance in communications networks where increasingly high switching speeds are required. Phase change materials (PCMs), in particular those based on paraffin wax, provide wealth of exciting applications with unusual thermally-induced switching properties, only limited by paraffin’s rather low thermal conductivity. In this paper, the use of different carbon fillers as thermal conductivity enhancers for paraffin has been investigated, and a novel structure based on spot of paraffin wax as a thermo-optic switch is presented. Thermo-optical switching parameters are enhanced with the addition of graphite and graphene, due to the extreme thermal conductivity of the carbon fillers. Differential Scanning Calorimetry (DSC) and Scanning electron microscope (SEM) are performed on paraffin wax composites, and specific heat capacities are calculated based on DSC measurements. Thermo-optical switching based on transmission is measured as a function of the host concentration under conventional electric heating and laser heating of paraffin-carbon fillers composites. Further enhancements in thermo-optical switching parameters are studied under Nd:YAG laser heating. This novel structure can be used in future networks with huge bandwidth requirements and electric noise free remote aerial laser switching applications. PMID:28772884

  8. New Remote Gas Sensor Using Rapid Electro-Optical Path Switching

    Science.gov (United States)

    Sachse, G. W.; Lebel, P. J.; Wallio, H. A.; Vay, S. A.; Wang, L. G.

    1994-01-01

    Innovative gas filter correlation radiometer (GFCR) features nonmechanical switching of internal optical paths. Incoming radiation switched electro-optically, by means of polarization, between two optical paths, one of which contains correlation gas cell while other does not. Advantages include switching speed, 2 to 3 orders of magnitude faster than mechanical techniques, and high reliability. Applications include regional studies of atmospheric chemistry from either manned or unmanned aircraft as well as satellite studies of global distributions, sources and sink mechanisms for key species involved in chemistry of troposphere. Commercial applications: ability to survey many miles of natural gas pipelines rapidly from aircraft, pinpointing gas leaks by measuring methane at 2.3 micrometers.

  9. Improved optical packet switching structure with recirculation buffer and feedback tunable wavelength converter

    Institute of Scientific and Technical Information of China (English)

    Cheng Wu; Shilin Xiao

    2009-01-01

    The performance of an optical switching network is mainly determined by its core node structure.An improved optical packet switching(OPS)node structure based on recirculation optical fiber delay line(FDL)and feedback tunable wavelength converter(TWC),and a specific scheduling algorithm for the node structure are presented.This switching structure supports both point-to-point and point-to-multi-points broadcasting transmission with superior capacity expansion performance.Its superiority in packet loss probability is proved by simulation.

  10. All-optical Data Vortex node using an MZI-SOA switch array

    DEFF Research Database (Denmark)

    Jung, H.D.; Tafur Monroy, Idelfonso; Koonen, A.M.J.;

    2007-01-01

    We propose and demonstrate a new structure of a Data Vortex switch node for all-optical routing of wavelength-division-multiplexing (WDM) 10-Gb/s optical packets. The proposed node consists of two Mach-Zehnder interferometers with integrated semiconductor optical amplifier: an optical AND gate...... and a high-speed optical switch. In the experiment, WDM 10-Gb/s data packets are successfully routed with 1-dB power penalty at a bit-error rate of 10(-9)....

  11. Optical switches based on CdS single nanowire

    Energy Technology Data Exchange (ETDEWEB)

    Xi, Yi [Department of Applied Physics, Chongqing University, 174 Shapingba Street, Chongqing 400044 (China); School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245 (United States); Hu, Chenguo, E-mail: hucg@cqu.edu.cn [Department of Applied Physics, Chongqing University, 174 Shapingba Street, Chongqing 400044 (China); Zheng, Chunhua; Zhang, Hulin [Department of Applied Physics, Chongqing University, 174 Shapingba Street, Chongqing 400044 (China); Yang, Rusen [School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0245 (United States); Tian, Yongshu [Chongqing Communication College, Chongqing 400035 (China)

    2010-10-15

    CdS nanowires have been synthesized by a composite-hydroxide-mediated approach. The characterization of the nanowire with X-ray diffraction, scanning electron microscopy, and transmission electron microscopy indicated a single-crystalline hexagonal structure growing along [21-bar 1-bar 0] direction with length up to 100 {mu}m. The UV-visible reflection spectrum demonstrated a band gap of 2.36 eV. A strong light emission centered at 543 nm was observed under different excitation wavelengths of 300, 320, 360 and 400 nm, which was further confirmed by a bright fluorescent imaging of a single CdS nanowire. The photocurrent response based on a single CdS nanowire showed distinct optical switch under the intermittent illumination of white light. The rise and decay time were less than 1.0 and 0.2 s, respectively, indicating high crystallization with fewer trap centers in the CdS nanowires. It is possible that the undesirable trapping effects on grain-boundaries for photoconductors could be avoided thanks to the single-crystalline nature of the CdS nanowires.

  12. Optimizing Fiber Topologies for WDM Optical Networks Based on Multi-Granularity Optical Switching Technology

    Institute of Scientific and Technical Information of China (English)

    LI Junjie; ZHOU Bingkun; ZHANG Hanyi; LI Yanhe

    2006-01-01

    For the quality of service (QoS) and fairness considerations, the hop counts of various lightpaths in a wavelength division multiplexing (WDM) optical network should be short and compact. The development of multi-granularity optical switching technology has made it possible to construct various fiber topologies over a fixed physical topology. This paper describes a fiber topology design (FTD) problem, which minimizes the maximum number of required fibers in the physical links for a maximum lightpath hop count in the fiber topology. After the formular description for the FTD problem, a method was given to obtain the lower bound on the maximum number of required fibers. For large or moderate scale networks, three heuristic algorithms are given to efficiently solve the FTD problem. This study gives a new way to optimize the resource configuration performance in WDM optical networks at the topology level and proves its effectiveness via both analyses and numerical experiments.

  13. Recurrent state-switching of a two-state quantum dot laser by optical feedback

    Science.gov (United States)

    Virte, Martin; Breuer, Stefan; Sciamanna, Marc; Panajotov, Krassimir

    2016-04-01

    In this contribution, we experimentally report recurrent switching between ground and excited state emission in a quantum dot laser controlled by optical feedback. We demonstrate that changing the phase of the optical feedback can efficiently induce switching between the two emission processes of the laser. Experimentally, by using an external mirror placed on a piezo-actuator, we were able to achieve incomplete switching between ground and excited state emission, i.e. without complete extinction of the modes. The switching takes place for variations of the external cavity length at the wavelength scale, i.e. around 1.2 um. Theoretically, we successfully link this switching behaviour with the evolution of the modal gain difference between the two modes induced by the variations of the optical feedback phase.

  14. Field analysis of two-dimensional focusing grating couplers

    Science.gov (United States)

    Borsboom, P.-P.; Frankena, H. J.

    1995-05-01

    A different technique was developed by which several two-dimensional dielectric optical gratings, consisting 100 or more corrugations, were treated in a numerical reliable approach. The numerical examples that were presented were restricted to gratings made up of sequences of waveguide sections symmetric about the x = 0 plane. The newly developed method was effectively used to investigate the field produced by a two-dimensional focusing grating coupler. Focal-region fields were determined for three symmetrical gratings with 19, 50, and 124 corrugations. For focusing grating coupler with limited length, high-frequency intensity variations were noted in the focal region.

  15. An Easily Operating Polymer 1×4 Optical Waveguide Switch Matrix Based on Vertical Couplers

    Institute of Scientific and Technical Information of China (English)

    Kaixin Chen; Pak L Chu; Hau Ping Chan; Kin S. Chiang

    2007-01-01

    A three-dimensional (3D) polymer thermo-optic (TO) 1×4 waveguide switch matrix based on vertical couplers is demonstrated. It consists of four basic 3D switch units and because of its 3D structure, its construction is compact, only 9mm in length; moreover, the control logic of the entire switch is very simple, the light signal can be easily switched to any output port by operating only a single switch unit. The finished devices exhibit a switching extinction ratio greater than 21 dB for all of four output ports and the crosstalk between two adjacent output ports is lower than n for all switching units is about 50 mW.

  16. Electronic Transport Properties of a Naphthopyran-Based Optical Molecular Switch:an ab initio Study

    Institute of Scientific and Technical Information of China (English)

    XIA Cai-Juan; LIU De-Sheng; ZHANG Ying-Tang

    2011-01-01

    The electronic transport properties of a. Naphthopyran-based molecular optical switch are investigated by using the nonequilibrium Green's Function formalism combined with first-principles density functional theory. The molecule that comprises the switch can convert between its open and closed forms upon photoexcitation. Theoretical results show that the current through the open form is significantly larger than that through the closed form, which is different from other optical switches based on ring-opening reactions of the molecular bridge. The maximum on-off ratio (about 90) can be obtained at 1.4 V. The physical origin of the switching behavior is interpreted based on the spatial distributions of molecular orbitals and the HOMO-LUMO gap. Our result shows that the naphthopyran-based molecule is a good candidate for optical molecular switches and will be useful in the near future.%@@ ronic transport properties of a naphthopyran-based molecular optical switch are investigated by using the nonequilibrium Green's function formalism combined with first-principles density functional theory.The molecule that comprises the switch can convert between its open and closed forms upon photoexcitation.Theoretical results show that the current through the open form is significantly larger than that through the closed form,which is different from other optical switches based on ring-opening reactions of the molecular bridge.The maximum on-off ratio(about 90)can be obtained at 1.4 V.The physical origin of the switching behavior is interpreted based on the spatial distributions of molecular orbitals and the HOMO-LUMO gap.Our result shows that the naphthopyran-based molecule is a good candidate for optical molecular switches and will be useful in the near future.

  17. 640 Gbit/s Optical Packet Switching using a Novel In-Band Optical Notch-Filter Labeling Scheme

    DEFF Research Database (Denmark)

    Medhin, Ashenafi Kiros; Galili, Michael; Oxenløwe, Leif Katsuo

    2014-01-01

    Optical packet switching of 640 Gbit/s data packets is reported using an in-band optical labeling technique based on notch-filtering of the data spectrum and extracting the label using a bandpass filter. BER 10􀀀9 is achieved.......Optical packet switching of 640 Gbit/s data packets is reported using an in-band optical labeling technique based on notch-filtering of the data spectrum and extracting the label using a bandpass filter. BER 10􀀀9 is achieved....

  18. All-Optical Switching Using Fabry-Perot Laser Diodes(Invited paper)

    Institute of Scientific and Technical Information of China (English)

    P. K. A. Wai; L. Y. Chan; H. Y. Tam

    2003-01-01

    In this paper, we investigate all-optical packet switching using a multi-wavelength mutual injection-locked Fabry-Perot laser diode. We observe error-free packet-switching of a 10 Gb/s signal with an extinction ratio of 16.9.

  19. Synchronization in a Random Length Ring Network for SDN-Controlled Optical TDM Switching

    DEFF Research Database (Denmark)

    Kamchevska, Valerija; Cristofori, Valentina; Da Ros, Francesco;

    2016-01-01

    . In addition, we propose a novel synchronization algorithm that enables automatic synchronization of software defined networking controlled all-optical TDM switching nodes connected in a ring network. Besides providing synchronization, the algorithm also can facilitate dynamic slot size change and failure...... multiplexing transmission and switching of data bursts when using the proposed algorithm to provide synchronization....

  20. All-Optical Switching Using Fabry-Perot Laser Diodes (Invited paper)

    Institute of Scientific and Technical Information of China (English)

    P.; K.; A.; Wai; L.; Y.; Chan; H.; Y.; Tam

    2003-01-01

    In this paper, we investigate all-optical packet switching using a multi-wavelength mutual injection-locked Fabry-Perot laser diode. We observe error-free packet-switching of a 10 Gb/s signal with an extinction ratio of 16.9.

  1. Switching of light with light using cold atoms inside a hollow optical fiber

    DEFF Research Database (Denmark)

    Bajcsy, Michal; Hofferberth, S.; Peyronel, Thibault

    2010-01-01

    We demonstrate a fiber-optical switch that operates with a few hundred photons per switching pulse. The light-light interaction is mediated by laser-cooled atoms. The required strong interaction between atoms and light is achieved by simultaneously confining photons and atoms inside the microscopic...

  2. Topology optimization of two-dimensional waveguides

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Sigmund, Ole

    2003-01-01

    In this work we use the method of topology optimization to design two-dimensional waveguides with low transmission loss.......In this work we use the method of topology optimization to design two-dimensional waveguides with low transmission loss....

  3. Two dimensional convolute integers for machine vision and image recognition

    Science.gov (United States)

    Edwards, Thomas R.

    1988-01-01

    Machine vision and image recognition require sophisticated image processing prior to the application of Artificial Intelligence. Two Dimensional Convolute Integer Technology is an innovative mathematical approach for addressing machine vision and image recognition. This new technology generates a family of digital operators for addressing optical images and related two dimensional data sets. The operators are regression generated, integer valued, zero phase shifting, convoluting, frequency sensitive, two dimensional low pass, high pass and band pass filters that are mathematically equivalent to surface fitted partial derivatives. These operators are applied non-recursively either as classical convolutions (replacement point values), interstitial point generators (bandwidth broadening or resolution enhancement), or as missing value calculators (compensation for dead array element values). These operators show frequency sensitive feature selection scale invariant properties. Such tasks as boundary/edge enhancement and noise or small size pixel disturbance removal can readily be accomplished. For feature selection tight band pass operators are essential. Results from test cases are given.

  4. Energy efficiency benefits of introducing optical switching in Data Center Networks

    DEFF Research Database (Denmark)

    Pilimon, Artur; Zeimpeki, Alexandra; Fagertun, Anna Manolova

    2017-01-01

    In this paper we analyze the impact of WDM-enhanced optical circuit switching on the power consumption of multiple Data Center Network (DCN) architectures. Traditional three-tier Tree, Fat-Tree and a ring-based structure are evaluated and optical switching is selectively introduced on different...... layers of the network topology. The analysis is based on network-level simulations using a transport network planning tool applied to small-scale setups of the considered DCNs. The obtained results show that introducing all-optical switching within the DCN leads to reduced power consumption in all...... an optically switched core benefits most the ring-based network. For the latter, the core ring nodes need fewer long-reach transponders at the trunk interfaces and benefit from more efficient traffic grooming in the access part....

  5. Imperfect two-dimensional topological insulator field-effect transistors

    Science.gov (United States)

    Vandenberghe, William G.; Fischetti, Massimo V.

    2017-01-01

    To overcome the challenge of using two-dimensional materials for nanoelectronic devices, we propose two-dimensional topological insulator field-effect transistors that switch based on the modulation of scattering. We model transistors made of two-dimensional topological insulator ribbons accounting for scattering with phonons and imperfections. In the on-state, the Fermi level lies in the bulk bandgap and the electrons travel ballistically through the topologically protected edge states even in the presence of imperfections. In the off-state the Fermi level moves into the bandgap and electrons suffer from severe back-scattering. An off-current more than two-orders below the on-current is demonstrated and a high on-current is maintained even in the presence of imperfections. At low drain-source bias, the output characteristics are like those of conventional field-effect transistors, at large drain-source bias negative differential resistance is revealed. Complementary n- and p-type devices can be made enabling high-performance and low-power electronic circuits using imperfect two-dimensional topological insulators. PMID:28106059

  6. Mode-selective optical packet switching in mode-division multiplexing networks.

    Science.gov (United States)

    Diamantopoulos, N P; Hayashi, M; Yoshida, Y; Maruta, A; Maruyama, R; Kuwaki, N; Takenaga, K; Uemura, H; Matsuo, S; Kitayama, K

    2015-09-07

    A novel mode-selective optical packet switching, based on mode-multiplexers/demultiplexers and multi-port optical micro-electro-mechanical systems (MEMS) switches, has been proposed and experimentally demonstrated. The experimental demonstration was performed using the LP(01), LP(11a) and LP(11b) modes of a 30-km long mode-division multiplexed few-mode fiber link, utilizing 40 Gb/s, 16-QAM signals.

  7. 40 Gbit/s NRZ Packet-Length Insensitive Header Extraction for Optical Label Switching Networks

    DEFF Research Database (Denmark)

    Seoane, Jorge; Kehayas, E; Avramopoulos, H.

    2006-01-01

    A simple method for 40 Gbit/s NRZ header extraction based on envelope detection for optical label switching networks is presented. The scheme is insensitive to packet length and spacing and can be single-chip integrated cost-effectively......A simple method for 40 Gbit/s NRZ header extraction based on envelope detection for optical label switching networks is presented. The scheme is insensitive to packet length and spacing and can be single-chip integrated cost-effectively...

  8. Two-Dimensional Phononic Crystals: Disorder Matters.

    Science.gov (United States)

    Wagner, Markus R; Graczykowski, Bartlomiej; Reparaz, Juan Sebastian; El Sachat, Alexandros; Sledzinska, Marianna; Alzina, Francesc; Sotomayor Torres, Clivia M

    2016-09-14

    The design and fabrication of phononic crystals (PnCs) hold the key to control the propagation of heat and sound at the nanoscale. However, there is a lack of experimental studies addressing the impact of order/disorder on the phononic properties of PnCs. Here, we present a comparative investigation of the influence of disorder on the hypersonic and thermal properties of two-dimensional PnCs. PnCs of ordered and disordered lattices are fabricated of circular holes with equal filling fractions in free-standing Si membranes. Ultrafast pump and probe spectroscopy (asynchronous optical sampling) and Raman thermometry based on a novel two-laser approach are used to study the phononic properties in the gigahertz (GHz) and terahertz (THz) regime, respectively. Finite element method simulations of the phonon dispersion relation and three-dimensional displacement fields furthermore enable the unique identification of the different hypersonic vibrations. The increase of surface roughness and the introduction of short-range disorder are shown to modify the phonon dispersion and phonon coherence in the hypersonic (GHz) range without affecting the room-temperature thermal conductivity. On the basis of these findings, we suggest a criteria for predicting phonon coherence as a function of roughness and disorder.

  9. Toward exa-scale optical circuit switch interconnect networks for future datacenter/HPC

    Science.gov (United States)

    Ishii, Kiyo; Inoue, Takashi; Namiki, Shu

    2017-01-01

    This paper discusses how to realize an optical circuit switching interconnect capable of more than 10 Tbps link bandwidth and more than 100,000 end points scalability. To keep continuous performance improvement of datacenters or high performance computers, high capacity and low latency interconnect network is essential. To handle such large bandwidth interconnect networks with low energy consumption, optical switch technologies will become inevitable. This paper firstly examines the scaling of the energy consumption of optical circuit switching networks based on the state of the art silicon photonics switch technology. Secondly to achieve Tbps-class link bandwidth, the WDM transmission technology and a shared WDM light source mechanism named "wavelength bank" are introduced. Due to the shared light source, each optical transceiver does not have to carry individual light sources, which enables simple WDM transceivers with cost-efficient silicon photonics technologies. Then a new optical switch control approach which reduces the control overhead time is discussed. In the proposed approach, the optical data plane itself represents the path destination, which enables a simple distributed-like control procedure. The proposed approach is expected to achieve the scalability and flexibility supporting more than 10 Tbps link bandwidth and more than 100,000 endpoints with 40 WDM channels. The proposed interconnect architecture offers direct end-to-end optical paths enabling low latencies with the "speed of light". The paper also discusses some of the challenges which should be resolved to practically realize the future large bandwidth optical interconnect networks.

  10. 1×N rotary vertical micromirror for optical switching applications

    Science.gov (United States)

    Tu, Ching-Chen; Fanchiang, Kuohao; Liu, Cheng-Hsien

    2005-01-01

    We report a 1xN rotary optical switching mirror actuated by an electrostatic comb-driver for the optical networking. A variety of MEMS optical switching mirrors have been recently proposed. Some of these devices utilize surface micromachined films as reflection micromirrors and result in optical degradation. Some of these devices fabricated by bulk micromachining highly rely on delicate assembly for the micromirrors to the top of the actuators. In this paper, we focus on developing a rotary optical switching micromirror with no need of delicate assembly. The rotary actuator and the switching micromirror are both fabricated by deep RIE in our design. We use the Spin-On-Glass (SOG), which is used as the intermediated layer in the low temperature boning, to fabricate a rotary MEMS optical switching mirror with self-assembly. We successfully assemble the micromirror on top of the rotor stage of the rotary actuator. Experimental results show that our rotary vertical micromirror rotates about 1.5° under 150 volts. The first vibration mode of this rotary switching MEMS mirror is a rotary mode and appears around 3.4 kHz, which is measured via a Polytec laser doppler vibrometer.

  11. A 4 × 4 Strictly Nonblocking Silicon-on-Insulator Thermo-Optic Switch Matrix

    Institute of Scientific and Technical Information of China (English)

    YANG Di; LI Yan-Ping; CHEN Shao-Wu; YU Jin-Zhong

    2005-01-01

    @@ A 4 × 4 strictly nonblocking thermo-optic switch matrix implemented with a 2 × 2 Mach-Zehnder switch unit was fabricated in silicon-on-insulator wafer. Insertion losses of the shortest and the longest path in the device are about 14.8dB and 19.2dB, respectively. The device presents a very low loss dependent on wavelength. For one switch unit, the power consumption needed for operation is measured to be 0.270 W-0.288 W and the switching time is about 13 ± 1μs.

  12. Fabrication of Thermo-Optic Switch in Silicon-on-Insulator

    Institute of Scientific and Technical Information of China (English)

    王章涛; 夏金松; 樊中朝; 陈少武; 余金中

    2003-01-01

    Silicon-on-insulator technology has been used to fabricate 2 × 2 thermo-optic switches. The switch shows crosstalk of-23.4 dB and extinction ratio of 18.1 dB in the bar-state. The switching speed is less than 30 μs and the power consumption is about 420mW. The measured excess loss is 1.8 dB. These merits make the switch more attractive for applications in wavelength division multiplexing.

  13. Single-photon all-optical switching using coupled microring resonators

    Indian Academy of Sciences (India)

    Wenge Yang; Amitabh Joshi; Min Xiao

    2007-08-01

    We study the nonlinear phase response of a microring resonator coupled to a bus waveguide and the use of this nonlinear phase shift to store information in the microring resonator and enhance the switching characteristics of a Mach–Zehnder interferometer (MZI). By introducing coupling between adjacent microring resonators, the switching characteristics of the MZI can be exponentially enhanced as a function of the number of microring resonators, when compared to the linear enhancement for uncoupled resonators. With only a few moderate-finesse microring resonators, the switching power can be reduced to attowatt level, allowing for photonic switching devices that operate at single-photon level in ordinary optical waveguides.

  14. Ultrafast coherent dynamics of a photonic crystal all-optical switch

    CERN Document Server

    Colman, Pierre; Yu, Yi; Mørk, Jesper

    2016-01-01

    We present pump-probe measurements of an all-optical photonic crystal switch based on a nanocavity, resolving fast coherent temporal dynamics. The measurements demonstrate the importance of coherent effects typically neglected when considering nanocavity dynamics. In particular, we report the observation of an idler pulse. The measurements are in good agreement with a theoretical model that allows us to ascribe the observation to oscillations of the free carrier population in the nanocavity. The effect opens perspectives for the realization of new all-optical photonic crystal switches with unprecedented switching contrast.

  15. Compact all-optical switches based on photon-induced suppression of mode interference

    Institute of Scientific and Technical Information of China (English)

    Longzhi Li; Yi Tang; Jianyi Yang; Minghua Wang; Xiaoqing Jiang

    2006-01-01

    @@ An optically activated optical switch based on suppression of mode interference (SMI) is presented. The imaging properties of multi-mode interference (MMI) section in the switch with Y-branch can be modified by a controlling light injection. The switch was simulated by finite difference beam propagation method(FD-BPM) and fabricated on GaAIAs/GaAs epitaxial materials. At the wavelength of 1.31 μm, the primary experiment showed an extinction ratio of about 8 dB with controlling light power density of 73.5W/mm2.

  16. Synthesis, physical properties and simulation of thermo-optic switch based on azo benzothiazole heterocyclic polymer

    Science.gov (United States)

    Qiu, Fengxian; Chen, Caihong; Zhou, Qiaolan; Cao, Zhijuan; Cao, Guorong; Guan, Yijun; Yang, Dongya

    2014-05-01

    A chromophore molecule 4-[(benzothiazole-2-yl)diazenyl]phenyl-1,3-diamine (BTPD) was prepared with 2-amino benzothiazole and m-phenylenediamine by diazo-coupling reaction. Then, the BTPD was polymerized with polyether polyol (NJ-220) and isophorone diisocyanate (IPDI) to obtain novel azo benzothiazole polyurethane-urea (BTPUU). The chemical structures of BTPD and BTPUU were characterized by FT-IR and UV-visible spectroscopy. The thermal and mechanical properties of BTPUU film were investigated. The refractive index and transmission loss of BTPUU film were measured at different temperatures and different laser wavelengths (532 nm, 650 nm and 850 nm) by an attenuated total reflection (ATR) technique and CCD digital imaging devices. The thermo-optic coefficients of BTPUU are -4.7086 × 10-4 °C-1 (532 nm), -6.5257 × 10-4 °C-1 (650 nm) and -5.1029 × 10-4 °C-1 (850 nm), respectively. A Y-branch switch and Mach-Zehnder interferometer (MZI) thermo-optic switches based on thermo-optic effect were proposed and the performances of the switches were simulated, respectively. The results show that the power consumption of the Y-branch thermo-optic switch is only 3.28 mW. The response times of Y-branch and MZI switches are 8.0 ms and 2.0 ms, respectively. The results indicate that the prepared BTPUU has high potential for the applications of the Y-branch digital optical switch (DOS), MZI thermo-optic switch, directional coupler (DC) switch and optical modulators.

  17. Optimization of silicon-on-insulator based optical switch using tapered waveguides

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Optimiz ed 2×2 switches based on silicon-on-insulator (SOI) were demonstrated. In the design, single mode rib waveguides and multimode interferences (MMIs) are connected by tapered waveguides to reduce the mode coupling loss between the two types of waveguides. The average insertion loss of the switches is about -16.9 dB and the excess loss of one is measured of -1.3 dB. The worst crosstalk is larger than 25 dB. Experimental results indicate that some of the main characteristics of optical switches are improved in the modified design, which is according with theoretic analysis. The novel design can be used to improve the characteristics of optical switch matrixes based on 2×2 switch units.

  18. Energy-bandwidth trade-off in all-optical photonic crystal microcavity switches

    DEFF Research Database (Denmark)

    Heuck, Mikkel; Kristensen, Philip Trøst; Mørk, Jesper

    2011-01-01

    The performance of all-optical switches is a compromise between the achievable bandwidth of the switched signal and the energy requirement of the switching operation. In this work we consider a system consisting of a photonic crystal cavity coupled to two input and two output waveguides....... As a specific example of a switching application, we investigate the demultiplexing of an optical time division multiplexed signal. To quantify the energy-bandwidth trade-off, we introduce a figure of merit for the detection of the demultiplexed signal. In such investigations it is crucial to consider...... patterning effects, which occur on time scales that are longer than the bit period. Our analysis is based on a coupled mode theory, which allows for an extensive investigation of the influence of the system parameters on the switching dynamics. The analysis is shown to provide new insights into the ultrafast...

  19. Two-Dimensional Transition Metal Dichalcogenides and Their Charge Carrier Mobilities in Field-Effect Transistors

    Science.gov (United States)

    Ahmed, Sohail; Yi, Jiabao

    2017-10-01

    Two-dimensional (2D) materials have attracted extensive interest due to their excellent electrical, thermal, mechanical, and optical properties. Graphene has been one of the most explored 2D materials. However, its zero band gap has limited its applications in electronic devices. Transition metal dichalcogenide (TMDC), another kind of 2D material, has a nonzero direct band gap (same charge carrier momentum in valence and conduction band) at monolayer state, promising for the efficient switching devices (e.g., field-effect transistors). This review mainly focuses on the recent advances in charge carrier mobility and the challenges to achieve high mobility in the electronic devices based on 2D-TMDC materials and also includes an introduction of 2D materials along with the synthesis techniques. Finally, this review describes the possible methodology and future prospective to enhance the charge carrier mobility for electronic devices.

  20. Switching at the nanoscale: chiroptical molecular switches and motors. : Section Title: Optical, Electron, and Mass Spectroscopy and Other Related Properties

    NARCIS (Netherlands)

    Browne, Wesley R.; Pijper, Dirk; Pollard, Michael M.; Feringa, Bernard; Amabilino, David B.

    2009-01-01

    A review on the recent developments in the field of chiroptical switches and nanomotors. Topics discussed include switching of mol. state, azobenzene-based chiroptical photoswitching, electrochiroptical switching, diarylethene-based chiroptical switches, mol. switching with circularly polarized

  1. Optical True Time Delay for Phased Array Antennas Composed of 2×2 Optical MEMS Switches and Fiber Delay Lines

    Institute of Scientific and Technical Information of China (English)

    Back-Song; Lee; Jong-Dug; Shin; Boo-Gyoun; Kim

    2003-01-01

    We proposed an optical true time delay (TTD) for phased array antennas (PAAs) composed of 2×2 optical MEMS switches, single-mode fiber delay lines, and a fixed wavelength laser diode. A 3-bit TTD for 10 GHz PAAs was implemented with a time delay error less than ± 0.2 ps.

  2. A proposal for digital electro-optic switches with free-carrier dispersion effect and Goos-Hanchen shift in silicon-on-insulator waveguide corner mirror

    Science.gov (United States)

    Sun, DeGui

    2013-09-01

    In a silicon-on-insulator (SOI) waveguide corner mirror (WCM) structure, with the quantum process of a frustrated total internal reflection (FTIR) phenomenon and the time delay principle in the two-dimensional potential barrier tunneling process of a mass of particles, we derive an accurate physical model for the Goos-Hanchen (GH) shift of optical guided-mode in the FTIR process, and in principle match the GH shift jumping states with the independent guided-modes. Then, we propose and demonstrate a new regime of 1 × N digital optical switches with a matching state between the free-carrier dispersion (FCD) based refractive index modulation (RIM) of silicon to create a GH shift jumping function of a photonic signal at the reflecting interface and the independent guided-modes in the FTIR process, where a MOS-capacitor type electro-optic modulation regime is proposed and discussed to realize an effective FCD-based RIM. At the critical matching state, i.e., the incident of an optical beam is at the vicinity of Brewster angle in the WCM, a mini-change of refractive index of waveguide material can cause a great jump of GH shift along the FTIR reflecting interface, and further a 1 × N digital optical switching process could be realized. For a 350-500 nm single-mode rib waveguide made on the 220 nm CMOS-compatible SOI substrate and with the FCD effect based RIM of silicon crystal, a concentration variation of 1018-1019 cm-3 has caused a 0.5-2.5 μm GH shift of reflected beam, which is at 2-5 times of a mode-size and hence radically convinces an optical switching function with a 1 × 3-1 × 10 scale.

  3. Analysis of S-SEED's characteristics in optical switch

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This article introduces the basic structure of a symmetric self-electrooptic effect device (S-SEED), and applies the Kirchoff's current law and a purely equivalent capacitive model, to analyze S-SEED's switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED's voltage-time (V-T) and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED's switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED's switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED's switch characteristics.

  4. Optical Switching and Spatial Routing by a Delay-Controlled Optical Emitter

    Directory of Open Access Journals (Sweden)

    A. Ramírez

    2013-06-01

    Full Text Available Semiconductor Laser or Light Emitting Diodes, (LEDs as active elements of optical switches or spatial routing devices are widely used in integrated optical circuitry. Electro-optic, magneto-optic, mechanical or other methods are applied for that purpose. The present paper deals with a novel effect, which appears in the light field of a. c. driven luminescence emitters in Fabry-Perot structure under electrical excitation depending on time (a.c., characterized because the light band emitted on the side face of the device moves up and down due to the finite diffusion velocity of the injected excess minority carriers. The combination of such emitter with a portioned detector element, allows spatial routing between these two detector segments. Particular emphasis is laid on a theoretical treatment of light propagation inside the emitter bulk which finally allows the construction of the light field intensity on the side face of the Fabry-Perot body, necessary to prove the proposed effect.

  5. Two Dimensional Plasmonic Cavities on Moire Surfaces

    Science.gov (United States)

    Balci, Sinan; Kocabas, Askin; Karabiyik, Mustafa; Kocabas, Coskun; Aydinli, Atilla

    2010-03-01

    We investigate surface plasmon polariton (SPP) cavitiy modes on two dimensional Moire surfaces in the visible spectrum. Two dimensional hexagonal Moire surface can be recorded on a photoresist layer using Interference lithography (IL). Two sequential exposures at slightly different angles in IL generate one dimensional Moire surfaces. Further sequential exposure for the same sample at slightly different angles after turning the sample 60 degrees around its own axis generates two dimensional hexagonal Moire cavity. Spectroscopic reflection measurements have shown plasmonic band gaps and cavity states at all the azimuthal angles (omnidirectional cavity and band gap formation) investigated. The plasmonic band gap edge and the cavity states energies show six fold symmetry on the two dimensional Moire surface as measured in reflection measurements.

  6. Two-Dimensional Planetary Surface Lander

    Science.gov (United States)

    Hemmati, H.; Sengupta, A.; Castillo, J.; McElrath, T.; Roberts, T.; Willis, P.

    2014-06-01

    A systems engineering study was conducted to leverage a new two-dimensional (2D) lander concept with a low per unit cost to enable scientific study at multiple locations with a single entry system as the delivery vehicle.

  7. Ultra-Fast All-Optical Self-Aware Protection Switching Based on a Bistable Laser Diode

    DEFF Research Database (Denmark)

    An, Yi; Vukovic, Dragana; Lorences Riesgo, Abel;

    2014-01-01

    We propose a novel concept of all-optical protection switching with link failure automatic awareness based on AOWFF. The scheme is experimentally demonstrated using a single MG-Y laser diode with a record switching time ~200 ps.......We propose a novel concept of all-optical protection switching with link failure automatic awareness based on AOWFF. The scheme is experimentally demonstrated using a single MG-Y laser diode with a record switching time ~200 ps....

  8. Nonlinear optical switching and optical limiting in colloidal CdSe quantum dots investigated by nanosecond Z-scan measurement

    Science.gov (United States)

    Valligatla, Sreeramulu; Haldar, Krishna Kanta; Patra, Amitava; Desai, Narayana Rao

    2016-10-01

    The semiconductor nanocrystals are found to be promising class of third order nonlinear optical materials because of quantum confinement effects. Here, we highlight the nonlinear optical switching and optical limiting of cadmium selenide (CdSe) quantum dots (QDs) using nanosecond Z-scan measurement. The intensity dependent nonlinear absorption and nonlinear refraction of CdSe QDs were investigated by applying the Z-scan technique with 532 nm, nanosecond laser pulses. At lower intensities, the nonlinear process is dominated by saturable absorption (SA) and it is changed to reverse saturable absorption (RSA) at higher intensities. The SA behaviour is attributed to the ground state bleaching and the RSA is ascribed to free carrier absorption (FCA) of CdSe QDs. The nonlinear optical switching behaviour and reverse saturable absorption makes CdSe QDs are good candidate for all-optical device and optical limiting applications.

  9. Ultrafast two dimensional infrared chemical exchange spectroscopy

    Science.gov (United States)

    Fayer, Michael

    2011-03-01

    The method of ultrafast two dimensional infrared (2D IR) vibrational echo spectroscopy is described. Three ultrashort IR pulses tuned to the frequencies of the vibrational transitions of interest are directed into the sample. The interaction of these pulses with the molecular vibrational oscillators produces a polarization that gives rise to a fourth pulse, the vibrational echo. The vibrational echo pulse is combined with another pulse, the local oscillator, for heterodyne detection of the signal. For fixed time between the second and third pulses, the waiting time, the first pulse is scanned. Two Fourier transforms of the data yield a 2D IR spectrum. The waiting time is increased, and another spectrum is obtained. The change in the 2D IR spectra with increased waiting time provides information on the time evolution of the structure of the molecular system under observation. In a 2D IR chemical exchange experiment, two species A and B, are undergoing chemical exchange. A's are turning into B's, and B's are turning into A's, but the overall concentrations of the species are not changing. The kinetics of the chemical exchange on the ground electronic state under thermal equilibrium conditions can be obtained 2D IR spectroscopy. A vibration that has a different frequency for the two species is monitored. At very short time, there will be two peaks on the diagonal of the 2D IR spectrum, one for A and one for B. As the waiting time is increased, chemical exchange causes off-diagonal peaks to grow in. The time dependence of the growth of these off-diagonal peaks gives the chemical exchange rate. The method is applied to organic solute-solvent complex formation, orientational isomerization about a carbon-carbon single bond, migration of a hydrogen bond from one position on a molecule to another, protein structural substate interconversion, and water hydrogen bond switching between ions and water molecules. This work was supported by the Air Force Office of Scientific

  10. Optical switching and photoluminescence in erbium-implanted vanadium dioxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Herianto, E-mail: mail@heriantolim.com; Stavrias, Nikolas; Johnson, Brett C.; McCallum, Jeffrey C. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Marvel, Robert E.; Haglund, Richard F. [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37240 (United States)

    2014-03-07

    Vanadium dioxide (VO{sub 2}) is under intensive consideration for optical switching due to its reversible phase transition, which features a drastic and rapid shift in infrared reflectivity. Classified as an insulator–to–metal transition, the phase transition in VO{sub 2} can be induced thermally, electrically, and optically. When induced optically, the transition can occur on sub-picosecond time scales. It is interesting to dope VO{sub 2} with erbium ions (Er{sup 3+}) and observe their combined properties. The first excited-state luminescence of Er{sup 3+} lies within the wavelength window of minimal transmission-loss in silicon and has been widely utilized for signal amplification and generation in silicon photonics. The incorporation of Er{sup 3+} into VO{sub 2} could therefore result in a novel photonic material capable of simultaneous optical switching and amplification. In this work, we investigate the optical switching and photoluminescence in Er-implanted VO{sub 2} thin films. Thermally driven optical switching is demonstrated in the Er-implanted VO{sub 2} by infrared reflectometry. Photoluminescence is observed in the thin films annealed at ∼800 °C or above. In addition, Raman spectroscopy and a statistical analysis of switching hysteresis are carried out to assess the effects of the ion implantation on the VO{sub 2} thin films. We conclude that Er-implanted VO{sub 2} can function as an optical switch and amplifier, but with reduced switching quality compared to pure VO{sub 2}.

  11. An all-optical matrix multiplication scheme with non-linear material based switching system

    Institute of Scientific and Technical Information of China (English)

    Archan Kumar Das; Sourangshu Mukhopadhyay

    2005-01-01

    Optics is a potential candidate in information, data, and image processing. In all-optical data and information processing, optics has been used as information carrying signal because of its inherent advantages of parallelism. Several optical methods are proposed in support of the above processing. In many algebraic,arithmetic, and image processing schemes fundamental logic and memory operations are conducted exploring all-optical devices. In this communication we report an all-optical matrix multiplication operation with non-linear material based switching circuit.

  12. Cavity electromagnetically induced transparency and all-optical switching using ion Coulomb crystals

    DEFF Research Database (Denmark)

    Albert, Magnus; Dantan, Aurelien Romain; Drewsen, Michael

    2011-01-01

    nonlinear interactions, such as those based on electromagnetic induced transparency (EIT)2, 3, 4, 5, 6, 9, 10, 11, 12. Here, we demonstrate for the first time EIT as well as all-optical EIT-based light switching using ion Coulomb crystals situated in an optical cavity. Changes from essentially full...

  13. Efficient all-optical switch using a Λ atom in a cavity QED system

    DEFF Research Database (Denmark)

    Nielsen, Anne E. B.; Kerckhoff, Joseph

    2011-01-01

    We propose an all-optical switch constructed from a two-mode optical resonator containing a strongly coupled, three-state system. The coupling allows a weak, continuous wave laser drive to incoherently control the transmission of a much stronger, continuous wave signal laser into (and through) th...

  14. Optical Waveguide Switches Employing Total-Internal-Reflection (TIR) Effect (Invited Paper)

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, our recent research work on the total-internal-reflection optical switch is presented. The thermo-optic effect of polymeric materials and the photon-induced carrier effect of GaAlAs/GaAs are used in our devices.

  15. Efficient all-optical switching using slow light within a hollow fiber

    DEFF Research Database (Denmark)

    Bajcsy, Michal; Hofferberth, S.; Balic, Vlatko

    2009-01-01

    We demonstrate a fiber-optical switch that is activated at tiny energies corresponding to a few hundred optical photons per pulse. This is achieved by simultaneously confining both photons and a small laser-cooled ensemble of atoms inside the microscopic hollow core of a single-mode photonic...

  16. Nonlinear all-optical switch based on a white-light cavity

    Science.gov (United States)

    Li, Na; Xu, Jingping; Song, Ge; Zhu, Chengjie; Xie, Shuangyuan; Yang, Yaping; Zubairy, M. Suhail; Zhu, Shi-Yao

    2016-04-01

    It is well known that there is a bottleneck for nonlinear all-optical switching, namely, the switching power and the switching time cannot be lowered simultaneously. A lower switching power requires a resonator with a high quality (Q ) factor, but leads to a longer switching time. We propose to overcome this bottleneck by replacing the nonlinear cavity in such an all-optical switch by a white-light cavity. This can be done by doping three-level atoms in the ring resonator and applying incoherent pump and coherent driving fields on it. The white-light cavity possesses broadband resonance in a linear region. Therefore, for the incident pulse, a broad range of frequency components can take part in the nonlinear process, and so it requires lower power to achieve switching compared to the conventional ring resonator. On the other hand, the refractive index of a white-light cavity has negative dispersion, leading to a fast group velocity. This results in a shorter time to build up the resonant response, yielding a short switching time.

  17. Exact analytic flux distributions for two-dimensional solar concentrators.

    Science.gov (United States)

    Fraidenraich, Naum; Henrique de Oliveira Pedrosa Filho, Manoel; Vilela, Olga C; Gordon, Jeffrey M

    2013-07-01

    A new approach for representing and evaluating the flux density distribution on the absorbers of two-dimensional imaging solar concentrators is presented. The formalism accommodates any realistic solar radiance and concentrator optical error distribution. The solutions obviate the need for raytracing, and are physically transparent. Examples illustrating the method's versatility are presented for parabolic trough mirrors with both planar and tubular absorbers, Fresnel reflectors with tubular absorbers, and V-trough mirrors with planar absorbers.

  18. Dynamics of all-optically switched micropillar resonances

    CERN Document Server

    Thyrrestrup, Henri; Ctistis, Georgios; Claudon, Julien; Vos, Willem L

    2014-01-01

    Here we do frequency and time resolved switching of a single GaAs/AlGa micropillar cavity with a pillar diameter of 6 mu using a ultrafast pump-probe setup. The switching is achieved by two-photon excitation of free carriers by an femtosecond pump pulse. We observe a simultaneously frequency shift of the first two transverse micropillar modes and obtain high resolution frequency traces of the two resonances in time. A difference in the the maximum switching magnitude of 12% point is caused by spatial inhomogeneous excitation of carriers in the pillar. The relaxation dynamic of the two resonances show a strongly non-exponential decay. We interpret the non-exponential dynamics in term of a second order decay model for the spontaneous recombination of electron and hole for the free carriers and a slow free carrier trapping time of ~300 ps.

  19. A New All-Optical Switching Node Including Virtual Memory and Synchronizer

    Directory of Open Access Journals (Sweden)

    Selma Batti

    2010-02-01

    Full Text Available This paper presents an architecture for an all optical switching node. The architecture is suitable for optical packet and optical burst switching and provides appropriate contention resolution schemes and QoS guarantees. A concept, called virtual memory, is developed to allow controllable and reasonable periods for delaying optical traffics. Related to its implementation, several engineering issues are discussed, including the use of loopbased optical delay lines, fiber Bragg gratings, and limited number of signal amplifications. In particular, two implementations using optical flip-flop and laser neuron network based control units are analyzed. This paper also discusses the implementation and performance of an alloptical synchronizer that is able to synchronize arriving data units to be aligned on the clock signal associated with the beginning time of slots, in the node, with an acceptable error.

  20. NATO Advanced Research Workshop on Optical Switching in Low-Dimensional Systems

    CERN Document Server

    Bányai, L

    1989-01-01

    This book contains all the papers presented at the NATO workshop on "Optical Switching in Low Dimensional Systems" held in Marbella, Spain from October 6th to 8th, 1988. Optical switching is a basic function for optical data processing, which is of technological interest because of its potential parallelism and its potential speed. Semiconductors which exhibit resonance enhanced optical nonlinearities in the frequency range close to the band edge are the most intensively studied materials for optical bistability and fast gate operation. Modern crystal growth techniques, particularly molecular beam epitaxy, allow the manufacture of semiconductor microstructures such as quantum wells, quantum wires and quantum dots in which the electrons are only free to move in two, one or zero dimensions, of the optically excited electron-hole pairs in these low respectively. The spatial confinement dimensional structures gives rise to an enhancement of the excitonic nonlinearities. Furthermore, the variations of the microstr...

  1. Electromagnetically induced two-dimensional grating assisted by incoherent pump

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yu-Yuan; Liu, Zhuan-Zhuan; Wan, Ren-Gang, E-mail: wrg@snnu.edu.cn

    2017-04-25

    We propose a scheme for realizing electromagnetically induced two-dimensional grating in a double-Λ system driven simultaneously by a coherent field and an incoherent pump field. In such an atomic configuration, the absorption is suppressed owing to the incoherent pumping process and the probe can be even amplified, while the refractivity is mainly attributed to the dynamically induced coherence. With the help of a standing-wave pattern coherent field, we obtain periodically modulated refractive index without or with gain, and therefore phase grating or gain-phase grating which diffracts a probe light into high-order direction efficiently can be formed in the medium via appropriate manipulation of the system parameters. The diffraction efficiency attainable by the present gratings can be controlled by tuning the coherent field intensity or the interaction length. Hence, the two-dimensional grating can be utilized as all-optical splitter or router in optical networking and communication. - Highlights: • Two-dimensional grating is coherently induced in four-level atoms. • Phase and gain-phase gratings are obtained assisted by incoherent pump. • The diffraction power is improved due to the enhanced refraction modulation. • The gratings can be utilized as multi-channel all-optical splitter and router.

  2. RETRACTED — Preparation of helical biphenyl polyurethane and its low power consumption thermo-optic switch

    Science.gov (United States)

    Wang, Qing; Qiu, Fengxian; Yang, Dongya; Cao, Guorong; Guan, Yijun; Shen, Qiang; Zhuang, Lin; Cao, Zhijuan; Ye, Feiyan

    2013-04-01

    Azo chromophore molecule (NDPD) and helical biphenyl polyurethane (HBPU) were prepared. The chemical structures of NDPD and HBPU were characterized by FTIR and UV-vis spectroscopy. The measurements of refractive index, thermo-optic coefficient (dn/dT), transmission loss, refractive index dispersions and Sellmeyer coefficients of HBPU were measured using ATR technique, CCD digital imaging devices and Sellmeyer equation. The results showed that HBPU would be useful for the design of high performance digital optical switch. The prepared HBPU was utilized as core material to propose a Y-branch thermo-optic switch, which was based on thermo-optic effect of HBPU at the infrared communication wavelength of 1.55 μm. With branching angle of 0.143° and the finite difference beam propagation method (FD-BPM), the polymeric thermo-optic switch was simulated. The simulation results indicated that the device has a low switching power of 1.68 mW and a switching response time of 7.0 ms.

  3. Optimized design and fabrication of nanosecond response electro optic switch based on ultraviolet-curable polymers

    Institute of Scientific and Technical Information of China (English)

    赵旭亮; 岳远斌; 刘通; 孙健; 王希斌; 孙小强; 陈长鸣; 张大明

    2015-01-01

    A nanosecond response waveguide electro-optic (EO) switch based on ultraviolet (UV) sensitive polymers of Norland optical adhesive (NOA73) and Dispersed Red 1 (DR1) doped SU-8 (DR1/SU-8) is designed and fabricated. The absorption properties, refractive indexes, and surface morphologies of NOA73 film are characterized. The single-mode transmission condition is computed by the effective index method, and the percentage of optical field distributed in EO layer is optimized to be 93.78%. By means of spin-coating, thermal evaporation, photolithography, and inductively coupled plasma etching, a Mach–Zehnder inverted-rib waveguide EO switch with micro-strip line electrode is fabricated on a silicon substrate. Scanning electron microscope characterization proves the physic-chemical compatibility between NOA73 cladding and DR1/SU-8 core material. The optical transmission loss of the fabricated switch is measured to be 2.5 dB/cm. The rise time and fall time of switching are 3.199 ns and 2.559 ns, respectively. These results indicate that the inverted-rib wave-guide based on UV-curable polymers can effectively reduce the optical transmission loss and improve the time response performance of an EO switch.

  4. Ultrafast all-optical switching using signal flow graph for PANDA resonator.

    Science.gov (United States)

    Bahadoran, Mahdi; Ali, Jalil; Yupapin, Preecha P

    2013-04-20

    In this paper, the bifurcation behavior of light in the PANDA ring resonator is investigated using the signal flow graph (SFG) method, where the optical transfer function for the through and drop ports of the PANDA Vernier system are derived. The optical nonlinear phenomena, such as bistability, Ikeda instability, and dynamics of light in the silicon-on-insulator (SOI) PANDA ring resonator with four couplers are studied. The transmission curves for bistability and instability as a function of the resonant mode numbers and coupling coefficients for the coupler are derived by the SFG method and simulated. The proposed system has an advantage as no optical pumping component is required. Simulated results show that closed-loop bistable switching can be generated and achieved by varying mode resonant numbers in the SOI-PANDA Vernier resonator, where a smooth and closed-loop bistable switching with low relative output/input power can be obtained and realized. The minimum through-port switching time of 1.1 ps for resonant mode numbers of 5;4;4 and minimum drop port switching time of 1.96 ps for resonant mode numbers of 9;7;7 of the PANDA Vernier resonator are achieved, which makes the PANDA Vernier resonator an operative component for optical applications, such as optical signal processing and a fast switching key in photonics integrated circuits.

  5. Comments on: Optical computation based on nonlinear total reflectional optical switch at the interface

    Indian Academy of Sciences (India)

    Y A Zaghloul

    2015-12-01

    As we read the paper by Jianqi Zhang and Huan Xu, Pramana – J. Phys. 72, 547 (2009), two issues became clear, that warranted writing this comment. First, the switch, which is the main building block of the devices, and which is used to route the signal, does not work as explained in Section 4.1. Accordingly, the optical router does not work as explained, either. In addition, the half adder does not work as explained and a completely different Truth Table is obtained. The full adder is left to the reader as an exercise. Secondly, the previously published work, which is closely related to the work reported, was not referenced or discussed. In the following paragraphs we discuss each issue in some detail to give the authors the opportunity to better explain their work and clear such issues.

  6. Two-dimensional capillary electrophoresis using tangentially connected capillaries.

    Science.gov (United States)

    Sahlin, Eskil

    2007-06-22

    A novel type of fused silica capillary system is described where channels with circular cross-sections are tangentially in contact with each other and connected through a small opening at the contact area. Since the channels are not crossing each other in the same plane, the capillaries can easily be filled with different solutions, i.e. different solutions will be in contact with each other at the contact point. The system has been used to perform different types of two-dimensional separations and the complete system is fully automated where a high voltage switch is used to control the location of the high voltage in the system. Using two model compounds it is demonstrated that a type of two-dimensional separation can be performed using capillary zone electrophoresis at two different pH values. It is also shown that a compound with acid/base properties can be concentrated using a dynamic pH junction mechanism when transferred from the first separation to the second separation. In addition, the system has been used to perform a comprehensive two-dimensional capillary electrophoresis separation of tryptic digest of bovine serum albumin using capillary zone electrophoresis followed by micellar electrokinetic chromatography.

  7. A scalable silicon photonic chip-scale optical switch for high performance computing systems.

    Science.gov (United States)

    Yu, Runxiang; Cheung, Stanley; Li, Yuliang; Okamoto, Katsunari; Proietti, Roberto; Yin, Yawei; Yoo, S J B

    2013-12-30

    This paper discusses the architecture and provides performance studies of a silicon photonic chip-scale optical switch for scalable interconnect network in high performance computing systems. The proposed switch exploits optical wavelength parallelism and wavelength routing characteristics of an Arrayed Waveguide Grating Router (AWGR) to allow contention resolution in the wavelength domain. Simulation results from a cycle-accurate network simulator indicate that, even with only two transmitter/receiver pairs per node, the switch exhibits lower end-to-end latency and higher throughput at high (>90%) input loads compared with electronic switches. On the device integration level, we propose to integrate all the components (ring modulators, photodetectors and AWGR) on a CMOS-compatible silicon photonic platform to ensure a compact, energy efficient and cost-effective device. We successfully demonstrate proof-of-concept routing functions on an 8 × 8 prototype fabricated using foundry services provided by OpSIS-IME.

  8. All-Optical Switching of Magnetic Tunnel Junctions with Single Subpicosecond Laser Pulses

    Science.gov (United States)

    Chen, Jun-Yang; He, Li; Wang, Jian-Ping; Li, Mo

    2017-02-01

    The magnetic tunnel junction (MTJ) is one of the most important building blocks of spintronic logic and memory components for beyond-CMOS computation and communication. Although switching of MTJs without magnetic field has been achieved by charge and spin current injection, the operation speed is limited fundamentally by the spin-precession time to many picoseconds. We report the demonstration of ultrafast all-optical switching of an MTJ using single subpicosecond infrared laser pulses. This optically switchable MTJ uses ferrimagnetic Gd(Fe,Co) as the free layer and its switching is read out by measuring its tunneling magnetoresistance with a Δ R /R ratio of 0.6%. A switching repetition rate at MHz has been demonstrated, but the fundamental upper limit should be higher than tens of GHz rate. This result represents an important step toward integrated optospintronic devices that combines spintronics and photonics technologies to enable ultrafast conversion between fundamental information carriers of electron spins and photons.

  9. A novel graphene oxide-polyimide as optical waveguide material: Synthesis and thermo-optic switch properties

    Science.gov (United States)

    Cao, Tianlin; Zhao, Fanyu; Da, Zulin; Qiu, Fengxian; Yang, Dongya; Guan, Yijun; Cao, Guorong; Zhao, Zerun; Li, Jiaxin; Guo, Xiaotong

    2016-10-01

    In this work, a novel graphene oxide-polyimide (GOPI) as optical waveguide material was prepared. The structure, mechanical, thermal property and morphology of the GOPI was characterized by using fourier transform infrared, UV-visible spectroscopy, near-infrared spectrum, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscope and transmission electron microscopy. The thermo-optic coefficients (dn/dT) are -9.16 × 10-4 (532 nm), -7.56 × 10-4 (650 nm) and -4.82 × 10-4 (850 nm) °C-1, respectively. Based on the thermo-optic effect of prepared GOPI as waveguide material, a Y-branch with branching angle of 0.143° and Mach-Zehnder thermo-optic switches were designed. Using finite difference beam propagation method (FD-BPM) method, the simulation results such as power consumptions and response times of two different thermo-optic switches were obtained.

  10. Interpolation by two-dimensional cubic convolution

    Science.gov (United States)

    Shi, Jiazheng; Reichenbach, Stephen E.

    2003-08-01

    This paper presents results of image interpolation with an improved method for two-dimensional cubic convolution. Convolution with a piecewise cubic is one of the most popular methods for image reconstruction, but the traditional approach uses a separable two-dimensional convolution kernel that is based on a one-dimensional derivation. The traditional, separable method is sub-optimal for the usual case of non-separable images. The improved method in this paper implements the most general non-separable, two-dimensional, piecewise-cubic interpolator with constraints for symmetry, continuity, and smoothness. The improved method of two-dimensional cubic convolution has three parameters that can be tuned to yield maximal fidelity for specific scene ensembles characterized by autocorrelation or power-spectrum. This paper illustrates examples for several scene models (a circular disk of parametric size, a square pulse with parametric rotation, and a Markov random field with parametric spatial detail) and actual images -- presenting the optimal parameters and the resulting fidelity for each model. In these examples, improved two-dimensional cubic convolution is superior to several other popular small-kernel interpolation methods.

  11. Experimental Demonstration of Optical Switching of Tbit/s Data Packets for High Capacity Short-Range Networks

    DEFF Research Database (Denmark)

    Medhin, Ashenafi Kiros; Kamchevska, Valerija; Hu, Hao;

    2015-01-01

    Record-high 1.28-Tbit/s optical data packets are experimentally switched in the optical domain using a LiNbO3 switch. An in-band notch-filter labeling scheme scalable to 65,536 labels is employed and a 3-km transmission distance is demonstrated.......Record-high 1.28-Tbit/s optical data packets are experimentally switched in the optical domain using a LiNbO3 switch. An in-band notch-filter labeling scheme scalable to 65,536 labels is employed and a 3-km transmission distance is demonstrated....

  12. Design of buffer structure at core nodes in optical burst switching

    Institute of Scientific and Technical Information of China (English)

    LI Lei; ZHANG Min-gde; SUN Xiao-han

    2006-01-01

    Reasonable and effective buffer structures are proposed in core routers /nodes of optical burst switching.Based on the model of burst traffics and their contentions,the basic qualifications for the design of buffer structures are concluded.With these qualifications,buffer and switch integrated structures are proposed;and by conclusion and expansion,the classification rules of buffer structures are also proposed from different angles.The schemes to integrate structures are analyzed and simulated.

  13. Optimum design of a polymer electro-optic microring resonator switch

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Novel transfer functions are presented for a polymer electro-optic microring resonator switches. The resonating process of the light in the microring is simulated using the formulas. Then the optimization of the structural parameters is performed,and the characteristics are analyzed, such as the resonance time, output spectrum, operation voltage, insertion loss and crosstalk were analyzed. The simulation results show that the designed device exhibits favorable switching functions.

  14. Optical switching of cross intensity correlation in cavity electromagnetically induced transparency

    Science.gov (United States)

    Rao, Shi; Hu, Xiangming; Xu, Jun; Li, Lingchao

    2017-03-01

    We present optical switching of cross intensity correlation in the context of cavity electromagnetically induced transparency configuration. For symmetrical parameters, the cross intensity correlation switches from negative to positive as the atom–pump detunings change symmetrically from one case to the other. In terms of the dressed atomic states and the Bogoliubov modes we analyze the atom–photon interaction mechanism for the switching behavior, and present a numerical verification. As a by-product, we show noise squeezing of the sum or difference intensity in a limited region of parameters.

  15. Performance Trade-Offs for Wavelength Striping Optical Switching Using a Novel Star Architecture

    Directory of Open Access Journals (Sweden)

    Enrique Rodriguez-Colina

    2016-01-01

    Full Text Available This work describes various performance trade-offs that arise from the use of a technique for optical switching under various network topologies. Such switching operation can be summarized as follows: (a user data are divided into fixed-length fragments, (b each fragment is assigned to a different wavelength, and (c all wavelengths are simultaneously switched to the egress links. This concept of dividing user data into several wavelengths to be simultaneously switched is called wavelength striping and its purpose is to reduce latency and increase throughput for short distance interconnects. We depart from previous work where a building block implementing this basic switching function has been built around semiconductor optical amplifiers (SOAs. In this paper, we investigate diverse trade-offs that arise from the use of this switching approach in different network topologies. One of the main issues addressed in this paper is the relation between cascadability and bit error rate (BER. In this case, our results indicate that a switch fabric can cascade up to five stages without exceeding a BER of 10−9 and without incurring in power budget problems. We also show that the performance degradation, introduced by cascading SOAs, can be compensated with a star interconnect architecture that is introduced. Other issues addressed in this paper are the effect of scalability on cost and the effect of latency on TCP performance and reliability.

  16. Optical switching of a graphene mechanical switch using the Casimir effect

    Science.gov (United States)

    Inui, Norio

    2017-09-01

    We propose a method to control a graphene-based mechanical switch with light. By positioning a self-supporting graphene sheet parallel to a doped silicon membrane, irradiation of the membrane with light can bring the graphene into contact with the membrane. This operation is based on the enhancement of the Casimir force between the graphene sheet and a doped silicon membrane that results from photoionization; therefore, pull-in phenomena can occur even without applying any voltage. We theoretically investigated the dependence of the maximum displacement of a graphene sheet on the power of the irradiation light. Furthermore, the switching time is estimated by analyzing the time-evolution of the carrier density in a doped silicon membrane.

  17. TWO-DIMENSIONAL TOPOLOGY OF COSMOLOGICAL REIONIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yougang; Xu, Yidong; Chen, Xuelei [Key Laboratory of Computational Astrophysics, National Astronomical Observatories, Chinese Academy of Sciences, Beijing, 100012 China (China); Park, Changbom [School of Physics, Korea Institute for Advanced Study, 85 Hoegiro, Dongdaemun-gu, Seoul 130-722 (Korea, Republic of); Kim, Juhan, E-mail: wangyg@bao.ac.cn, E-mail: cbp@kias.re.kr [Center for Advanced Computation, Korea Institute for Advanced Study, 85 Hoegiro, Dongdaemun-gu, Seoul 130-722 (Korea, Republic of)

    2015-11-20

    We study the two-dimensional topology of the 21-cm differential brightness temperature for two hydrodynamic radiative transfer simulations and two semi-numerical models. In each model, we calculate the two-dimensional genus curve for the early, middle, and late epochs of reionization. It is found that the genus curve depends strongly on the ionized fraction of hydrogen in each model. The genus curves are significantly different for different reionization scenarios even when the ionized faction is the same. We find that the two-dimensional topology analysis method is a useful tool to constrain the reionization models. Our method can be applied to the future observations such as those of the Square Kilometre Array.

  18. Two dimensional topology of cosmological reionization

    CERN Document Server

    Wang, Yougang; Xu, Yidong; Chen, Xuelei; Kim, Juhan

    2015-01-01

    We study the two-dimensional topology of the 21-cm differential brightness temperature for two hydrodynamic radiative transfer simulations and two semi-numerical models. In each model, we calculate the two dimensional genus curve for the early, middle and late epochs of reionization. It is found that the genus curve depends strongly on the ionized fraction of hydrogen in each model. The genus curves are significantly different for different reionization scenarios even when the ionized faction is the same. We find that the two-dimensional topology analysis method is a useful tool to constrain the reionization models. Our method can be applied to the future observations such as those of the Square Kilometer Array.

  19. A Simple Performance Analysis of a Core Node in an Optical Burst Switched Network

    CERN Document Server

    Morsy, Mohamed H S; Shalaby, Hossam M H

    2008-01-01

    A simple mathematical model that considers the performance of an intermediate node having wavelength conversion capability in an OBS network is presented in this paper. The model assumes that the node has variable wavelength conversion capability which means that the node may have no, partial or full conversion capability. Two performance measures are derived from the model; namely, the steady state throughput and the average burst loss probability assuming Poisson traffic arrivals. In addition, a simulation work is performed in order to validate the results of our proposed model. Optimum values for the wavelength conversion capability in the node, which lead to minimum burst loss probability, are reached for different traffic conditions. Keywords: Optical Burst Switching (OBS), Optical Circuit Switching (OCS), Optical Packet Switching (OPS), Just-In-Time (JIT), Just-Enough-Time (JET).

  20. Matching Two-dimensional Gel Electrophoresis' Spots

    DEFF Research Database (Denmark)

    Dos Anjos, António; AL-Tam, Faroq; Shahbazkia, Hamid Reza

    2012-01-01

    This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches. This ar......This paper describes an approach for matching Two-Dimensional Electrophoresis (2-DE) gels' spots, involving the use of image registration. The number of false positive matches produced by the proposed approach is small, when compared to academic and commercial state-of-the-art approaches...

  1. Mobility anisotropy of two-dimensional semiconductors

    Science.gov (United States)

    Lang, Haifeng; Zhang, Shuqing; Liu, Zhirong

    2016-12-01

    The carrier mobility of anisotropic two-dimensional semiconductors under longitudinal acoustic phonon scattering was theoretically studied using deformation potential theory. Based on the Boltzmann equation with the relaxation time approximation, an analytic formula of intrinsic anisotropic mobility was derived, showing that the influence of effective mass on mobility anisotropy is larger than those of deformation potential constant or elastic modulus. Parameters were collected for various anisotropic two-dimensional materials (black phosphorus, Hittorf's phosphorus, BC2N , MXene, TiS3, and GeCH3) to calculate their mobility anisotropy. It was revealed that the anisotropic ratio is overestimated by the previously described method.

  2. Towards two-dimensional search engines

    OpenAIRE

    Ermann, Leonardo; Chepelianskii, Alexei D.; Shepelyansky, Dima L.

    2011-01-01

    We study the statistical properties of various directed networks using ranking of their nodes based on the dominant vectors of the Google matrix known as PageRank and CheiRank. On average PageRank orders nodes proportionally to a number of ingoing links, while CheiRank orders nodes proportionally to a number of outgoing links. In this way the ranking of nodes becomes two-dimensional that paves the way for development of two-dimensional search engines of new type. Statistical properties of inf...

  3. Ultrafast, broadband, and configurable midinfrared all-optical switching in nonlinear graphene plasmonic waveguides

    Directory of Open Access Journals (Sweden)

    Kelvin J. A. Ooi

    2016-07-01

    Full Text Available Graphene plasmonics provides a unique and excellent platform for nonlinear all-optical switching, owing to its high nonlinear conductivity and tight optical confinement. In this paper, we show that impressive switching performance on graphene plasmonic waveguides could be obtained for both phase and extinction modulations at sub-MW/cm2 optical pump intensities. Additionally, we find that the large surface-induced nonlinearity enhancement that comes from the tight confinement effect can potentially drive the propagating plasmon pump power down to the pW range. The graphene plasmonic waveguides have highly configurable Fermi-levels through electrostatic-gating, allowing for versatility in device design and a broadband optical response. The high capabilities of nonlinear graphene plasmonics would eventually pave the way for the adoption of the graphene plasmonics platform in future all-optical nanocircuitry.

  4. Sub-picosecond optical switching with a negative index metamaterial

    Energy Technology Data Exchange (ETDEWEB)

    Dani, Keshav M [Los Alamos National Laboratory; Upadhya, Prashant C [Los Alamos National Laboratory; Zahyum, Ku [CHTM-UNM

    2009-01-01

    Development of all-optical signal processing, eliminating the performance and cost penalties of optical-electrical-optical conversion, is important for continu,ing advances in Terabits/sec (Tb/s) communications.' Optical nonlinearities are generally weak, traditionally requiring long-path, large-area devicesl,2 or very high-Q, narrow-band resonator structures.3 Optical metamaterials offer unique capabilities for optical-optical interactions. Here we report 600 femtosecond (fs) all-optical modulation using a fIShnet (2D-perforated metallamorphous-Si (a-Si)/metal film stack) negative-index meta material with a structurally tunable broad-band response near 1.2 {micro}m. Over 20% modulation (experimentally limited) is achieved in a path length of only 116 nm by photo-excitation of carriers in the a-Si layer. This has the potential for Tb/s aU-optical communication and will lead to other novel, compact, tunable sub-picosecond (ps) photonic devices.

  5. Temporal dynamics of all-optical switching in Photonic Crystal Cavity

    DEFF Research Database (Denmark)

    Colman, Pierre; Heuck, Mikkel; Yu, Yi;

    2014-01-01

    The temporal dynamics of all-optical switching has been investigated in a Photonic Crystal Cavity with a 150fs-40aJ/pulse resolution. This allowed observing for the first time effects like pulse reshaping, pulse delay and intra-cavity Four-Wave-Mixing.......The temporal dynamics of all-optical switching has been investigated in a Photonic Crystal Cavity with a 150fs-40aJ/pulse resolution. This allowed observing for the first time effects like pulse reshaping, pulse delay and intra-cavity Four-Wave-Mixing....

  6. Fast and efficient silicon thermo-optic switching based on reverse breakdown of pn junction.

    Science.gov (United States)

    Li, Xianyao; Xu, Hao; Xiao, Xi; Li, Zhiyong; Yu, Yude; Yu, Jinzhong

    2014-02-15

    We propose and demonstrate a fast and efficient silicon thermo-optic switch based on reverse breakdown of the pn junction. Benefiting from the direct heating of silicon waveguide by embedding the pn junction into the waveguide center, fast switching with on/off time of 330 and 450 ns and efficient thermal tuning of 0.12  nm/mW for a 20 μm radius microring resonator are achieved, indicating a high figure of merit of only 8.8  mW·μs. The results here show great potential for application in the future optical interconnects.

  7. Harnessing the polariton drag effect to design an electrically controlled optical switch.

    Science.gov (United States)

    Berman, Oleg L; Kezerashvili, Roman Ya; Kolmakov, German V

    2014-10-28

    We propose a design of a Y-shaped electrically controlled optical switch based on the studies of propagation of an exciton-polariton condensate in a patterned optical microcavity with an embedded quantum well. The polaritons are driven by a time-independent force due to the microcavity wedge shape and by a time-dependent drag force owing to the interaction of excitons in a quantum well and the electric current running in a neighboring quantum well. It is demonstrated that by applying the drag force one can direct more than 90% of the polariton flow toward the desired branch of the switch with no hysteresis. By considering the transient dynamics of the polariton condensate, we estimate the response speed of the switch as 9.1 GHz. We also propose a design of the polariton switch in a flat microcavity based on the geometrically identical Y-shaped quantum wells where the polariton flow is only induced by the drag force. The latter setup enables one to design a multiway switch that can act as an electrically controlled optical transistor with on and off functions. Finally, we performed the simulations for a microcavity with an embedded gapped graphene layer and demonstrated that in this case the response speed of the switch can be increased up to 14 GHz for the same switch size. The simulations also show that the energy gap in the quasiparticle spectrum in graphene can be utilized as an additional parameter that controls the propagation of the signals in the switch.

  8. 二维氧化锌纳米阵列的制备及光学吸收特性研究%Research on the Preparation and Optical Absorption Properties of Two-Dimensional ZnO Array

    Institute of Scientific and Technical Information of China (English)

    乔璐; 朱亚彬; 徐浩

    2014-01-01

    采用漂移法,在玻璃衬底上制备出粒径分别为117,350和500 nm单层、大面积的聚苯乙烯胶体球掩膜板,在已制得的掩膜板上用射频磁控溅射的方法沉积一层氧化锌薄膜,最后用有机溶液四氢呋喃(THF)浸泡去除聚苯乙烯胶体球,获得不同粒径的二维氧化锌纳米团簇。通过扫描电子显微镜和能量色散X射线光谱仪对样品的形貌及成份进行表征,表明所制得样品为有序分布的蜂窝网状氧化锌纳米阵列。在室温下,通过吸收光谱仪测试样品在300~800 nm波长范围内的吸收光谱,结果表明对于具有不同尺寸晶粒的氧化锌纳米团簇样品,随着所采用的聚苯乙烯胶体球粒径的增大,即氧化锌纳米团簇粒径的增加,光吸收峰出现了宽化和红移;随着溅射时间的延长,即氧化锌薄膜膜厚的增加,光吸收率提高。此外,对氧化锌纳米团簇阵列的光吸收特性进行了基于离散偶极子近似的理论计算从而获得任意形状和尺寸粒子的吸收。目前,文献报道中用此理论计算各种形状的纳米金、银等金属的结果与实验结果相符,但是应用离散偶极子的近似理论计算氧化锌纳米颗粒的报道很少。应用此理论计算三角棱台形状的氧化锌光学吸收特性,根据氧化锌薄膜介电常数和膜厚的变化进行光吸收特性的模拟,并解释了实验结果。%The present paper’s main work is firstly preparing a single layer and a large area polystyrene microspheres mask,with 117,350 and 500 nm in diameter,and then depositing a layer of zinc oxide thin film on the mask board by RF magnetron sputte-ring technique,using nanospheres lithography technique to remove the polystyrene spheres by soaking with tetrahydrofuran,and two-dimensional zinc oxide nano-array samples were obtained at last.The samples were characterized on the morphology and composition by scanning electron microscopy

  9. Switching between optical bistability and multistability in plasmonic multilayer nanoparticles

    Science.gov (United States)

    Daneshfar, Nader; Naseri, Tayebeh

    2017-01-01

    We study the nonlinear optical response of multilayer metallic nanoparticles driven by an electromagnetic wave, which can show large field enhancement, hence significantly enhancing optical processes. In addition to optical bistability (OB), we find that optical multistability (OM), which plays a more important role in some applications than OB, is achievable and can be obtained in a multilayer plasmonic nanoparticle. Our results demonstrate that owing to strong localized fields created in the core and each layer of multilayer nanoshells, which occurs in the particles at frequencies close to the surface plasmon resonance, multilayer nanoparticles are promising systems with unique optical characteristics to control the light by light at the nanometer scale. It is demonstrated that OB can be converted to OM via adjusting the wavelength of the applied field and the size of the nanoshell, and the system can manifest optical hysteresis. It is found that the optical bistable or multistable threshold and the shape of hysteresis loops are strongly dependent on the thickness of shells, the incident wavelength, the permittivity of the surrounding medium, and the composition of the core and the inner/outer layers. We also give a discussion on the impact of the exciton-plasmon interaction and the intrinsic size effect on the nonlinear optical response of multilayer spherical nanoparticles.

  10. Piezoelectricity in Two-Dimensional Materials

    KAUST Repository

    Wu, Tao

    2015-02-25

    Powering up 2D materials: Recent experimental studies confirmed the existence of piezoelectricity - the conversion of mechanical stress into electricity - in two-dimensional single-layer MoS2 nanosheets. The results represent a milestone towards embedding low-dimensional materials into future disruptive technologies. © 2015 Wiley-VCH Verlag GmbH & Co. KGaA.

  11. Kronecker Product of Two-dimensional Arrays

    Institute of Scientific and Technical Information of China (English)

    Lei Hu

    2006-01-01

    Kronecker sequences constructed from short sequences are good sequences for spread spectrum communication systems. In this paper we study a similar problem for two-dimensional arrays, and we determine the linear complexity of the Kronecker product of two arrays. Our result shows that similar good property on linear complexity holds for Kronecker product of arrays.

  12. Two-Dimensional Toda-Heisenberg Lattice

    Directory of Open Access Journals (Sweden)

    Vadim E. Vekslerchik

    2013-06-01

    Full Text Available We consider a nonlinear model that is a combination of the anisotropic two-dimensional classical Heisenberg and Toda-like lattices. In the framework of the Hirota direct approach, we present the field equations of this model as a bilinear system, which is closely related to the Ablowitz-Ladik hierarchy, and derive its N-soliton solutions.

  13. A novel two dimensional particle velocity sensor

    NARCIS (Netherlands)

    Pjetri, Olti; Wiegerink, Remco J.; Lammerink, Theo S.; Krijnen, Gijs J.

    2013-01-01

    In this paper we present a two wire, two-dimensional particle velocity sensor. The miniature sensor of size 1.0x2.5x0.525 mm, consisting of only two crossed wires, shows excellent directional sensitivity in both directions, thus requiring no directivity calibration, and is relatively easy to fabrica

  14. Two-dimensional microstrip detector for neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Oed, A. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    Because of their robust design, gas microstrip detectors, which were developed at ILL, can be assembled relatively quickly, provided the prefabricated components are available. At the beginning of 1996, orders were received for the construction of three two-dimensional neutron detectors. These detectors have been completed. The detectors are outlined below. (author). 2 refs.

  15. Two-dimensional magma-repository interactions

    NARCIS (Netherlands)

    Bokhove, O.

    2001-01-01

    Two-dimensional simulations of magma-repository interactions reveal that the three phases --a shock tube, shock reflection and amplification, and shock attenuation and decay phase-- in a one-dimensional flow tube model have a precursor. This newly identified phase ``zero'' consists of the impact of

  16. Two-dimensional subwavelength plasmonic lattice solitons

    CERN Document Server

    Ye, F; Hu, B; Panoiu, N C

    2010-01-01

    We present a theoretical study of plasmonic lattice solitons (PLSs) formed in two-dimensional (2D) arrays of metallic nanowires embedded into a nonlinear medium with Kerr nonlinearity. We analyze two classes of 2D PLSs families, namely, fundamental and vortical PLSs in both focusing and defocusing media. Their existence, stability, and subwavelength spatial confinement are studied in detai

  17. A two-dimensional Dirac fermion microscope

    DEFF Research Database (Denmark)

    Bøggild, Peter; Caridad, Jose; Stampfer, Christoph

    2017-01-01

    in the solid state. Here we provide a perspective view on how a two-dimensional (2D) Dirac fermion-based microscope can be realistically implemented and operated, using graphene as a vacuum chamber for ballistic electrons. We use semiclassical simulations to propose concrete architectures and design rules of 2...

  18. On the Highly Stable Performance of Loss-Free Optical Burst Switching Networks

    Directory of Open Access Journals (Sweden)

    Milos Kozak

    2016-01-01

    Full Text Available Increase of bandwidth demand in data networks, driven by the continuous growth of the Internet and the increase of bandwidth greedy applications, raise the issue of how to support all the bandwidth requirements in the near future. Three optical switching paradigms have been defined and are being investigated: Optical Circuit Switching (OCS; Optical Packet Switching (OPS; and Optical Burst Switching (OBS. Among these paradigms, OBS is seen as the most appropriate solution today. However, OBS suffers from high burst loss as a result of contention in the bufferless mode of operation. This issue was investigated by Coutelen et al., 2009 who proposed the loss-free CAROBS framework whereby signal convertors of the optical signal to the electrical domain ensure electrical buffering. Convertors increase the network price which must be minimized to reduce the installation and operating costs of the CAROBS framework. An analysis capturing convertor requirements, with respect to the number of merging flows and CAROBS node offered load, was carried out. We demonstrated the convertor location significance, which led to an additional investigation of the shared wavelength convertors scenario. Shared wavelength convertors significantly decrease the number of required convertors and show great promise for CAROBS. Based on this study we can design a CAROBS network to contain a combination of simple and complex nodes that include none or some convertors respectively, a vital feature of network throughput efficiency and cost.

  19. Design of a Multicast Optical Packet Switch Based on Fiber Bragg Grating Technology for Future Networks

    Science.gov (United States)

    Cheng, Yuh-Jiuh; Yeh, Tzuoh-Chyau; Cheng, Shyr-Yuan

    2011-09-01

    In this paper, a non-blocking multicast optical packet switch based on fiber Bragg grating technology with optical output buffers is proposed. Only the header of optical packets is converted to electronic signals to control the fiber Bragg grating array of input ports and the packet payloads should be transparently destined to their output ports so that the proposed switch can reduce electronic interfaces as well as the bit rate. The modulation and the format of packet payloads may be non-standard where packet payloads could also include different wavelengths for increasing the volume of traffic. The advantage is obvious: the proposed switch could transport various types of traffic. An easily implemented architecture which can provide multicast services is also presented. An optical output buffer is designed to queue the packets if more than one incoming packet should reach to the same destination output port or including any waiting packets in optical output buffer that will be sent to the output port at a time slot. For preserving service-packet sequencing and fairness of routing sequence, a priority scheme and a round-robin algorithm are adopted at the optical output buffer. The fiber Bragg grating arrays for both input ports and output ports are designed for routing incoming packets using optical code division multiple access technology.

  20. All-optical switching in a symmetric three-waveguide coupler with phase-mismatched absorptive central waveguide.

    Science.gov (United States)

    Chen, Yijing; Ho, Seng-Tiong; Krishnamurthy, Vivek

    2013-12-20

    All-optical switching operation based on manipulation of absorption in a three-waveguide directional coupler is theoretically investigated. The proposed structure consists of one absorptive central waveguide and two identical passive side waveguides. Optically induced absorption change in the central waveguide effectively controls the coupling of light between the two side waveguides, leading to optical switching action. The proposed architecture alleviates the fabrication challenges and waveguide index matching conditions that limit previous demonstrations of similar switching schemes based on a two-waveguide directional coupler. The proposed device accommodates large modal index difference between absorptive and passive waveguides without compromising the switching extinction ratio.

  1. Evaluation of QoS differentiation mechanisms in asynchronous bufferless optical packet-switched networks

    DEFF Research Database (Denmark)

    Overby, H.; Stol, N.; Nord, Martin

    2006-01-01

    Existing quality of service differentiation schemes for today's IP over point-to-point optical WDM networks take advantage of electronic RAM to implement traffic management algorithms in order to isolate the service classes. Since practical optical RAM is not available, these techniques...... are not suitable for a future all-optical network. Hence, new schemes are needed to support QoS differentiation in optical packet-switched (OPS) networks. In this article we first present an overview of existing QoS differentiation mechanisms suitable for asynchronous bufferless OPS. We then compare...

  2. Electrical characterization of all-optical helicity-dependent switching in ferromagnetic Hall crosses

    Science.gov (United States)

    El Hadri, M. S.; Pirro, P.; Lambert, C.-H.; Bergeard, N.; Petit-Watelot, S.; Hehn, M.; Malinowski, G.; Montaigne, F.; Quessab, Y.; Medapalli, R.; Fullerton, E. E.; Mangin, S.

    2016-02-01

    We present an experimental study of all-optical helicity-dependent switching (AO-HDS) of ferromagnetic Pt/Co/Pt heterostructures with perpendicular magnetic anisotropy. The sample is patterned into a Hall cross and the AO-HDS is measured via the anomalous Hall effect. This all-electrical probing of the magnetization during AO-HDS enables a statistical quantification of the switching ratio for different laser parameters, such as the threshold power to achieve AO-HDS and the exposure time needed to reach complete switching at a given laser power. We find that the AO-HDS is a cumulative process, a certain number of optical pulses is needed to obtain a full and reproducible helicity-dependent switching. The deterministic switching of the ferromagnetic Pt/Co/Pt Hall cross provides a full "opto-spintronic device," where the remanent magnetization can be all-optically and reproducibly written and erased without the need of an external magnetic field.

  3. Transparent ceramic photo-optical semiconductor high power switches

    Science.gov (United States)

    Werne, Roger W.; Sullivan, James S.; Landingham, Richard L.

    2016-01-19

    A photoconductive semiconductor switch according to one embodiment includes a structure of sintered nanoparticles of a high band gap material exhibiting a lower electrical resistance when excited by light relative to an electrical resistance thereof when not exposed to the light. A method according to one embodiment includes creating a mixture comprising particles, at least one dopant, and at least one solvent; adding the mixture to a mold; forming a green structure in the mold; and sintering the green structure to form a transparent ceramic. Additional system, methods and products are also presented.

  4. All-optical switching in a continuously operated and strongly coupled atom-cavity system

    CERN Document Server

    Dutta, Sourav

    2016-01-01

    We experimentally demonstrate collective strong coupling, optical bi-stability (OB) and all-optical switching in a system consisting of ultracold 85Rb atoms, trapped in a dark magneto-optical trap (DMOT), coupled to an optical Fabry-Perot cavity. The strong coupling is established by measuring the vacuum Rabi splitting (VRS) of a weak on-axis probe beam. The dependence of VRS on the probe beam power is measured and bi-stability in the cavity transmission is observed. We demonstrate control over the transmission of the probe beam through the atom-cavity system using a free-space off-axis control beam and show that the cavity transmission can be switched on and off in micro-second timescales using micro-Watt control powers. The utility of the system as a tool for sensitive, in-situ and rapid measurements is envisaged.

  5. Experimental study on an all-optical switching based on MF-NOLM

    Institute of Scientific and Technical Information of China (English)

    SONG Xue-peng; REN Xiao-min; ZHANG Xia; YANG Guang-qiang; HUANG Yong-qing

    2006-01-01

    In this paper,the experiment on an all-optical switching is reported based on a microstructure fiber(MF)-nonlinear optical loop mirror(NOLM).In the experiment,a 25-meter-long MF(γ=36W-1km-1@1 550 nm) is used as a nonlinear medium of the nonlinear optical loop mirror and the input signal is generated by a 10 GHz tunable picosecond laser source,with a full-width at half-maximum (FWHM) of 2 ps and centered at 1 550 nm.With the increase of input power,a π nonlinear phase shift is obtained by a 40/60 coupler in the experiment,but the same result can not be found by a 48/52 coupler.Additionally,the switching devices can also be used as an all-optical regeneration.

  6. A nonlinear plasmonic resonator for three-state all-optical switching

    KAUST Repository

    Amin, Muhammad

    2014-01-01

    A nonlinear plasmonic resonator design is proposed for three-state all-optical switching at frequencies including near infrared and lower red parts of the spectrum. The tri-stable response required for three-state operation is obtained by enhancing nonlinearities of a Kerr medium through multiple (higher order) plasmons excited on resonator\\'s metallic surfaces. Indeed, simulations demonstrate that exploitation of multiple plasmons equips the proposed resonator with a multi-band tri-stable response, which cannot be obtained using existing nonlinear plasmonic devices that make use of single mode Lorentzian resonances. Multi-band three-state optical switching that can be realized using the proposed resonator has potential applications in optical communications and computing. © 2014 Optical Society of America.

  7. Photocurrent switching method based on photoisomerization of diarylethene layer for nondestructive readout of photochromic optical memory.

    Science.gov (United States)

    Tsujioka, Tsuyoshi; Onishi, Itaru; Natsume, Daisuke

    2010-07-10

    We report on photocurrent switching based on photoisomerization for the nondestructive readout of photochromic optical memory. The photoisomerization of a diarylethene (DAE) memory layer switched the photocurrent generated in a light-absorbing phthalocyanine layer upon irradiation of a laser light. This switching is based on the ionization potential change of the DAE molecules. Switching characteristics of the photocurrent were investigated for the laser light with a wavelength of 410 nm, 630 nm, or 780 nm. Excellent on-off ratios of the photocurrent were achieved by irradiation at 630 nm and 780 nm. When the pulsed laser light with a wavelength of 780 nm was repeatedly irradiated to the colored and uncolored memory devices, no change of the photocurrent signal levels was observed, even after 8 x 10(5) cycles, indicating a successful demonstration of the nondestructive readout.

  8. Bichromatic tuning of reflection bands in integrated CLC reflectors for optical switches, gates, and logic

    Science.gov (United States)

    Wu, Shing-Trong; Fuh, Andy Ying-Guey; Ho, Shau-Jung; Li, Ming-Shian

    2015-03-01

    This study investigates the bichromatic tuning of cholesteric liquid crystal (CLC) reflection bands from reflectors containing chiral azo dopants. Because the chiral azo molecules change their helical twist power in reversible photoisomerization, the reflection bands of the CLCs are modulated using purple and green laser beams. The CLC reflectors are integrated into an optical gate that can be used to modulate output spectra. We also apply the integrated system in optical switching and logic.

  9. A Bidirectional “Y” Type OXC Structure Using the Least Optical Switches

    Institute of Scientific and Technical Information of China (English)

    TAO Zhenning; WU Deming; XU Anshi

    2000-01-01

    In this paper, a bidirectional Y type optical cross-connect structure is introduced. It minimizes the number of 2 × 2 optical switches by utilizing the route characteristic of a bidirectional Y type OTN node. The method to satisfy this route request by our OXC is demonstrated. The wavelength utilizing efficiency between our structure and the nonblocking bidirectional Y type OTN node has also compared. The blocking, complexity, loss, loss uniformity and cross-talk characteristics are also demonstrated.

  10. Modeling and performance analysis of IP access interface in optical transmission networks with packet switching

    OpenAIRE

    Lackovic, Marko; Bungarzeanu, Cristian

    2006-01-01

    The article analyzes the influence of the Internet Protocol (IP) access interface on the packet loss probability and delay times in the optical packet switched network. The network and node model have been proposed, and the structure of the IP access interface, including assembler and holder, have been included in the analysis. It has been shown that the increase of the maximum optical packet sizes, as well as use of the holding feature as contention resolution mechanism, decrease the packet ...

  11. Reversible, electrical and optical switching on silver 3-phenyl-1-ureidonitrile complex thin films

    Institute of Scientific and Technical Information of China (English)

    张昊旭; 时东霞; 宋延林; 刘虹雯; 侯士敏; 薛增泉; 高鸿钧

    2002-01-01

    We report on the reversible, electrical and optical switching on silver 3-phenyl-l-ureidonitrile complex thin films.The films can switch from a high impedance state to a low impedance state with an applied electric field at the thresholdof 3.5 × 107V/m. Furthermore, the films can be switched back to the original state by treating the samples at about80℃. The optical recording is fulfilled using a semiconductor laser with a wavelength of 780nm. Erasure can beaccomplished by bulk heating or by the laser working with the power beneath the threshold. No loss of the organic wasfound in the experiments. This material may have a potential application in ultrahigh data density storage.

  12. Minimizing the Switch and Link Conflicts in an Optical Multi-stage Interconnection Network

    CERN Document Server

    Bhardwaj, Ved Prakash; Tyagi, Vipin

    2012-01-01

    Multistage Interconnection Networks (MINs) are very popular in switching and communication applications. A MIN connects N inputs to N outputs and is referred as an N \\times N MIN; having size N. Optical Multistage Interconnection Network (OMIN) represents an important class of Interconnection networks. Crosstalk is the basic problem of OMIN. Switch Conflict and Link Conflict are the two main reason of crosstalk. In this paper, we are considering both problems. A number of techniques like Optical window, Improved Window, Heuristic, Genetic, and Zero have been proposed earlier in this research domain. In this paper, we have proposed two algorithms called Address Selection Algorithm and Route Selection Algorithm (RSA). RSA is based on Improved Window Method. We have applied the proposed algorithms on existing Omega network, having shuffle-exchange connection pattern. The main functionality of ASA and RSA is to minimize the number of switch and link conflicts in the network and to provide conflict free routes.

  13. Optical switching of electric charge transfer pathways in porphyrin: a light-controlled nanoscale current router.

    Science.gov (United States)

    Thanopulos, Ioannis; Paspalakis, Emmanuel; Yannopapas, Vassilios

    2008-11-05

    We introduce a novel molecular junction based on a thiol-functionalized porphyrin derivative with two almost energetically degenerate equilibrium configurations. We show that each equilibrium structure defines a pathway of maximal electric charge transfer through the molecular junction and that these two conduction pathways are spatially orthogonal. We further demonstrate computationally how to switch between the two equilibrium structures of the compound by coherent light. The optical switching mechanism is presented in the relevant configuration subspace of the compound, and the corresponding potential and electric dipole surfaces are obtained by ab initio methods. The laser-induced isomerization takes place in two steps in tandem, while each step is induced by a two-photon process. The effect of metallic electrodes on the electromagnetic irradiation driving the optical switching is also investigated. Our study demonstrates the potential for using thiol-functionalized porphyrin derivatives for the development of a light-controlled nanoscale current router.

  14. Lidar Electro-Optic Beam Switch with a Liquid Crystal Variable Retarder

    Science.gov (United States)

    Baer, James

    2012-01-01

    A document discusses a liquid crystal variable retarder, an electro-optic element that changes the polarization of an optical beam in response to a low-voltage electronic signal. This device can be fabricated so that the element creates, among other states, a half-wave of retardance that can be reduced to a very small retardance. When aligned to a polarized source, this can act to rotate the polarization by 90 in one state, but generate no rotation in the other state. If the beam is then incident on a polarization beam splitter, it will efficiently switch from one path to the other when the voltage is applied. The laser beam switching system has no moving parts, improving reliability over mechanical switching. It is low cost, tolerant of high laser power density, and needs only simple drive electronics, minimizing the required system resources.

  15. Minimizing the Switch and Link Conflicts in an Optical Multi-stage Interconnection Network

    Directory of Open Access Journals (Sweden)

    Ved Prakash Bhardwaj

    2011-07-01

    Full Text Available Multistage Interconnection Networks (MINs are very popular in switching and communication applications. A MIN connects N inputs to N outputs and is referred as an N andamp;times; N MIN; having size N. Optical Multistage Interconnection Network (OMIN represents an important class of Interconnection networks. Crosstalk is the basic problem of OMIN. Switch Conflict and Link Conflict are the two main reason of crosstalk. In this paper, we are considering both problems. A number of techniques like Optical window, Improved Window, Heuristic, Genetic, and Zero have been proposed earlier in this research domain. In this paper, we have proposed two algorithms called Address Selection Algorithm and Route Selection Algorithm (RSA. RSA is based on Improved Window Method. We have applied the proposed algorithms on existing Omega network, having shuffleexchange connection pattern. The main functionality of ASA and RSA is to minimize the number of switch and link conflicts in the network and to provide conflict free routes.

  16. AN EFFECTIVE MODEL TO EVALUATE BLOCKING PROBABILITY OF TIME-SLOTTED OPTICAL BURST SWITCHED NETWORKS

    Institute of Scientific and Technical Information of China (English)

    Yang Zongkai; Ou Liang; Tan Xiansi

    2006-01-01

    Time-slotted optical burst switched network is a potential technique to support IP over Wavelength Division Multiplexing (WDM) by introduce Time Division Multiplexing (TDM) channel to Optical Burst Switching (OBS) technology. This paper presents a framework to evaluate blocking performance of time-slotted OBS networks with multi-fiber wavelength channels. The proposed model is efficient for not only single class traffic such as individual circuit switch traffics or best-effort traffics but also mixed multi-class traffics.The effectiveness of the proposed model is validated by simulation results. The study shows that blocking performance of multi-fiber TS-OBS network is acceptable for future Internet services.

  17. Preparation, optical properties and 1 Multiplication-Sign 2 polymeric thermo-optic switch of polyurethane-urea

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Fengxian, E-mail: fxqiuchem@163.com [School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013 (China); Cao, Zhijuan [School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013 (China); Cao, Guorong; Guan, Yijun; Shen, Qiang [Department of Physics, Jiangsu University, Zhenjiang 212013 (China); Wang, Qing; Yang, Dongya [School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013 (China)

    2012-08-15

    A polyurethane-urea (PUU) containing azo chromophore, polyether polyol (NJ-220) and isophorone diisocyanate (IPDI) was prepared. The structure, thermal property and mechanical properties of obtained PUU were characterized and measured by the UV-visible spectroscopy, Fourier transform infrared, Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The refractive index (n) of PUU was determined at different temperature and wavelength (532 nm, 650 nm and 850 nm) using attenuated total reflection (ATR) technique, and the thermo-optic coefficients (dn/dT) were -5.3643 Multiplication-Sign 10{sup -4} Degree-Sign C{sup -1}, -5.2500 Multiplication-Sign 10{sup -4} Degree-Sign C{sup -1} and -4.6071 Multiplication-Sign 10{sup -4} Degree-Sign C{sup -1}, respectively. Using the Charge Coupled Device (CCD) digital imaging devices, transmission loss of PUU was measured and the value was 0.659 dB cm{sup -1}. A 1 Multiplication-Sign 2 polymeric thermo-optic switch based on the thermo-optic effect of PUU film was proposed. With branching angle of 0.143 Degree-Sign and the finite difference beam propagation method (FD-BPM), the polymeric thermo-optic switch was simulated. The result showed that the power consumption of the thermo-optic switch could be only 0.72 mW, and the response time of the switch was about 3.0 ms. The obtained PUU has a significant improvement in reducing the power consumption and response time compared with those of the normal polymeric thermo-optic switches. -- Highlights: Black-Right-Pointing-Pointer Preparation and structural characterization of a novel azo polyurethane-urea (PUU). Black-Right-Pointing-Pointer The mechanical performance and thermal property of PUU film. Black-Right-Pointing-Pointer The thermo-optic property, transmission loss and dispersion property of PUU. Black-Right-Pointing-Pointer Proposed a new 1 Multiplication-Sign 2 polymeric thermo-optic switch.

  18. Ultrafast coherent dynamics of a photonic crystal all-optical switch

    DEFF Research Database (Denmark)

    Colman, Pierre; Hansen, Per Lunnemann; Yu, Yi

    2016-01-01

    We present pump-probe measurements of an all-optical photonic crystal switch based on a nanocavity, resolving fast coherent temporal dynamics. The measurements demonstrate the importance of coherent effects typically neglected when considering nanocavity dynamics. In particular, we report...

  19. All-optical octave-broad ultrafast switching of Si woodpile photonic band gap crystals

    NARCIS (Netherlands)

    Euser, T.G.; Molenaar, Adriaan J.; Fleming, J.G.; Gralak, Boris; Polman, Albert; Vos, Willem L.

    2008-01-01

    We present ultrafast all-optical switching measurements of Si woodpile photonic band gap crystals. The crystals are spatially homogeneously excited and probed by measuring reflectivity over an octave in frequency (including the telecommunication range) as a function of time. After 300 fs, the

  20. Femtosecond all-optical switching in AlGaAs waveguides using a time division interferometer

    Science.gov (United States)

    Lagasse, M. J.; Anderson, K. K.; Haus, H. A.; Fujimoto, J. G.

    1989-05-01

    All-optical switching of femtosecond pulses in AlGaAs waveguides is investigated using a novel time division interferometric technique which eliminates thermal imbalances. In addition to an instantaneous refractive index nonlinearity, free-carrier generation via two-photon absorption produces a response of several hundred picoseconds.