WorldWideScience

Sample records for twin roll caster

  1. Considerations for multivariable control of the twin-roller strip caster.

    Science.gov (United States)

    Cavazos, Alberto

    2006-04-01

    Twin-roller steel strip casters may offer advantages with respect to classical continuous casting hot rolling processes. Some works have reported control aspects of this process, however, the cross coupling elements have not been evaluated. In this work, the derivation of a 3 x 3 linearized multivariable model for process control purposes proposed in previous investigations is presented. The model was simplified to a 2 x 2 plant. The purpose of this work is to show that the process is highly interactive by performing an analysis of its multivariable characteristics. Some important considerations for process control design based on such multivariable characteristics of the process are discussed.

  2. The effect of caster types on global rolling resistance in manual wheelchairs on indoor and outdoor surfaces.

    Science.gov (United States)

    Chan, Franco H N; Eshraghi, Mehdi; Alhazmi, Mohammad A; Sawatzky, Bonita J

    2017-06-07

    An important aspect of reducing the strain of wheeling is to decrease rolling resistance. Previous laboratory research, using a treadmill, determined that smaller casters significantly increased rolling resistance. The purpose of this study was to determine the effect of caster size on various indoor and outdoor surfaces on global wheelchair rolling resistance. Three caster types with sizes 4 in, 5 in, and 6 in, three indoor surfaces, and three outdoor surfaces were studied. A manual wheelchair was passively pulled along each surface at 1.11 m/s (3.64 ft/s) by a power wheelchair, and the global rolling resistance of the manual wheelchair was measured using a calibrated force transducer. A 3×3 repeated measures analysis of variance (ANOVA) was conducted for both indoor and outdoor environments. The 4-in casters resulted in the highest global rolling resistance on most surfaces. The 5-in casters had the least rolling resistance on most indoor surfaces, and the 6-in casters had the least rolling resistance on most outdoor surfaces. Although 4-in casters are more popular among active wheelchair users, larger casters were shown to have lower rolling resistance on most surfaces. This study may help users select the best caster size depending upon their daily activities and lifestyle.

  3. Twin-belt continuous caster with containment and cooling of the exiting cast product for enabling high-speed casting of molten-center product

    Science.gov (United States)

    Dykes, Charles D.; Daniel, Sabah S.; Wood, J. F. Barry

    1990-02-20

    In continuously casting molten metal into cast product by a twin-belt machine, it is desirable to achieve dramatic increases in speed (linear feet per minute) at which cast product exits the machine, particularly in installations where steel cast product is intended to feed a downstream regular rolling mill (as distinct from a planetary mill) operating in tandem with the twin-belt caster. Such high-speed casting produces product with a relatively thin shell and molten interior, and the shell tends to bulge outwardly due to metallostatic head pressure of the molten center. A number of cooperative features enable high-speed, twin-belt casting: (1) Each casting belt is slidably supported adjacent to the caster exit pulley for bulge control and enhanced cooling of cast product. (2) Lateral skew steering of each belt provides an effective increase in moving mold length plus a continuity of heat transfer not obtained with prior art belt steering apparatus. (3) The exiting slab is contained and supported downstream from the casting machine to prevent bulging of the shell of the cast product, and (4) spray cooling is incorporated in the exit containment apparatus for secondary cooling of cast product.

  4. Semi-solid twin-roll casting process of magnesium alloy sheets

    International Nuclear Information System (INIS)

    Watari, H.; Davey, K.; Rasgado, M.T. Alonso; Haga, T.; Koga, N.

    2004-01-01

    An experimental approach has been performed to ascertain the effectiveness of semi-solid strip casting using a horizontal twin roll caster. The demand for light-weight products with high strength has grown recently due to the rapid development of automobile and aircraft technology. One key to such development has been utilization of magnesium alloys, which can potentially reduce the total product weight. However, the problems of utilizing magnesium alloys are still mainly related to high manufacturing cost. One of the solutions to this problem is to develop magnesium casting-rolling technology in order to produce magnesium sheet products at competitive cost for commercial applications. In this experiment, magnesium alloy AZ31B was used to ascertain the effectiveness of semi-solid roll strip casting for producing magnesium alloy sheets. The temperature of the molten magnesium, and the roll speeds of the upper and lower rolls, (which could be changed independently), were varied to find an appropriate manufacturing condition. Rolling and heat treatment conditions were changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microscopic observation of the crystals of the manufactured wrought magnesium alloys was performed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep drawing test of the cast magnesium alloy sheets after being hot rolled

  5. Thin Gauge Twin-Roll Casting, Process Capabilities and Product Quality

    Science.gov (United States)

    Daaland, O.; Espedal, A. B.; Nedreberg, M. L.; Alvestad, I.

    Traditionally industrial twin roll casters have been operated at gauges 6-10 mm, depending on the type of caster and the final product requirements. Over the past few years it has become apparent that a significant increase in productivity can be achieved when the casting gauge is reduced. Hydro Aluminium embarked on an extensive research and development, thin gauge casting programme, in the beginning of the 1990's and this paper presents some results from a five year lasting project (joint programme between Hydro Aluminium a.s. and Lauener Engineering). Based on more than 400 casting trials the major benefits and limitations of casting at reduced gauge and increased speed are outlined. Important aspects related to process development and product quality are discussed including: productivity and limitations, surface defects, microstructural characteristics, cooling rates and dendrite structure, segregation behaviour and mechanical properties after thermo-mechanical processing. Results for casting of several alloys are given. Additionally, numerical modelling results of the strip casting process are included.

  6. Assessment of Deformation Twinning in Cold Rolled Austenitic ...

    African Journals Online (AJOL)

    Deformation twinning has traditionally been studied with Transmission Electron Microscopy (TEM). In this study, an assessment of deformation twinning in Austenitic Stainless Steel (ASS), type 304L, cold rolled to 20% reduction was investigated using Scanning Electron Microscopy (SEM) and Electron Back Scatter ...

  7. Influence of Temperature and Rolling Speed on Twin Roll Cast Strip

    Science.gov (United States)

    Kurz, G.; Bohlen, J.; Stutz, L.; Letzig, D.; Kainer, K. U.

    Reducing vehicle weight and emissions by lightweight design is a major goal of the automotive industry. Magnesium as the lightest structural metal offers a significant weight saving potential compared to steel and aluminum. Cast magnesium components are widely used, e.g. as engine blocks or gear box housings. The application of magnesium sheets is currently hampered by the low formability of magnesium which means that a large number of rolling passes is required to roll a DC cast slab to final gauge sheet. This large number of rolling steps is the main reason for the high cost of magnesium sheets. An alternative, cost-efficient production route for magnesium sheets with improved properties is feedstock production by twin roll casting (TRC). In this paper we report the results of twin roll casting experiments on the magnesium alloy AZ31 (Mg-3Al-lZn-Mn) and discuss the influence of the process on the micro structure and texture of the strips.

  8. Microtexture analysis of cold-rolled and annealed twinning-induced plasticity steel

    International Nuclear Information System (INIS)

    Gazder, Azdiar A.; Saleh, Ahmed A.; Pereloma, Elena V.

    2011-01-01

    The microtexture evolution of cold-rolled and isochronally annealed Fe-24Mn-3Al-2Si-1Ni-0.06C twinning-induced plasticity steel is investigated by electron back-scattering diffraction. Novel deconstruction techniques are applied to cold-rolled and partially recrystallized maps. The formation of cold-rolling texture via composite slip/twin deformation pattern is corroborated by the relatively random spatial distribution of twinned and untwinned grains. Whereas the orientations of the newly nucleated grains are similar to the deformation texture, orientation-dependent, stored energy and second-order twinning contribute to the end-recrystallization texture.

  9. EBSD characterization of twinning in cold-rolled CP-Ti

    International Nuclear Information System (INIS)

    Li, X.; Duan, Y.L.; Xu, G.F.; Peng, X.Y.; Dai, C.; Zhang, L.G.; Li, Z.

    2013-01-01

    This work presents the use of a mechanical testing system and the electron backscatter diffraction technique to study the mechanical properties and twinning systems of cold-rolled commercial purity titanium, respectively. The dependence of twinning on the matrix orientation is analyzed by the distribution map of Schmid factor. The results showed that the commercial purity titanium experienced strong strain hardening and had excellent formability during rolling. Both the (112 ¯ 2) ¯ 3 ¯ > compressive twins and (101 ¯ 2) ¯ 1 ¯ > tensile twins were dependent on the matrix orientation. The Schmid factor of a grain influenced the activation of a particular twinning system. The specific rolling deformation of commercial purity titanium controlled the number and species of twinning systems and further changed the mechanical properties. - Highlights: • CP-Ti experienced strain hardening and had excellent formability. • Twins were dependent on the matrix orientation. • Schmid factor of a grain influenced the activation of a twinning system. • Rolling deformation controlled twinning systems and mechanical properties

  10. Study of twinning behaviors of rolled AZ31 magnesium alloy by interrupted in situ compressive tests

    International Nuclear Information System (INIS)

    Hou, Dewen; Liu, Tianmo; Shi, Dongfeng; Chen, Huicong; Chen, Hongbing

    2016-01-01

    In this paper rolled AZ31 magnesium alloy was deformed by interrupted in situ compressive tests. Compressive and re-compressive tests were conducted along rolling direction (RD). It is discovered that the yield strength of re-compression is enhanced due to grain refinement by {10–12} tensile twins. Twinning activation and evolution are evidenced by electron backscatter diffraction. Correlations with grain orientation and boundary misorientation are observed in the region of twins that arise at grain boundaries. The distributions of grain boundary misorientation associated with twin nucleation are mapped. It is found that nucleation of twin is mainly controlled by the initial texture, and is more easy at low misorientation grain boundaries. The growth of twins depend on two modes: the thickening of the existing twin lamellae and new twins is nucleated at grain boundary. With increasing compressive strain, the growth and coalescence of twins eventually encompassed the whole grain. Meanwhile, the basal texture is weaker after compression due to the propagation and coalescence of tensile twins.

  11. Detachable caster adapter

    Science.gov (United States)

    Mohr, R. J.

    1969-01-01

    Detachable caster adapter moves heavy welding tables when fork lift trucks are not practical. A support saddle on the adapter, connected to the caster platform by means of a hinge, fits the leg of the welding table, but can be modified to fit other leg configurations.

  12. The effect of caster wheel diameter and mass distribution on drag forces in manual wheelchairs.

    Science.gov (United States)

    Zepeda, Rene; Chan, Franco; Sawatzky, Bonita

    2016-01-01

    This study proposes a way to reduce energy losses in the form of rolling resistance friction during manual wheelchair propulsion by increasing the size of the front caster wheels and adjusting the weight distribution. Drag tests were conducted using a treadmill and a force transducer. Three different casters diameter (4 in., 5 in., and 6 in.) and six different mass distribution combinations (based on percentage of total weight on the caster wheels) were studied. A two-way analysis of variance test was performed to compare caster size and weight distribution contribution with drag force of an ultralight wheelchair. The 4 in. caster contributed significantly more drag, but only when weight was 40% or greater over the casters. Weight distribution contributed more to drag regardless of the casters used.

  13. Observation and Schmid factor analysis of multiple twins in a warm-rolled Mg–3Al–1Zn alloy

    DEFF Research Database (Denmark)

    Xin, Renlong; Wang, Maoyin; Huang, Xiaoxu

    2014-01-01

    This study aims to understand the features of twinning that occurred during warm-rolling of Mg–3Al–1Zn alloys. The rolling was performed at 150 °C with the c-axis of most grains nearly parallel to the transverse direction. Electron backscatter diffraction analysis was conducted to examine...... microstructural evolution of the rolled sample. Multiple twins including {10−12} extension twin, {10−11} contraction twin, {10−11}–{10−12} and {10−12}–{10−11} double twins and {10−12}–{10−11}–{10−12} tertiary twins were observed in the rolled sample. These twins were present even in the same grain orientation...

  14. Secondary recrystallization behavior in a twin-roll cast grain-oriented electrical steel

    Energy Technology Data Exchange (ETDEWEB)

    Song, Hong-Yu; Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn; Wang, Yin-Ping; Wang, Guo-Dong

    2017-04-15

    The microstructure and texture evolution along the processing was investigated with a particular focus on the secondary recrystallization behavior in a 0.23 mm-thick twin-roll cast grain-oriented electrical steel. A striking feature is that Goss orientation originated during twin-roll casting as a result of shear deformation and it was further enhanced during hot rolling and normalizing. After primary recrystallization annealing, a homogeneous microstructure associated with a sharp γ-fiber texture was produced. During secondary recrystallization annealing, the γ-fiber texture was first strengthened and weakened with increasing temperature prior to the onset of secondary recrystallization. Goss grains always exhibited more 20–45° misoriented boundaries than the matrix. The matrix was quite stable during secondary recrystallization with the aid of dense inhibitors. Finally, a complete secondary recrystallization microstructure consisting of large Goss grains was produced. The grain boundary characteristics distribution indicated that the high energy model was responsible for the abnormal growth of Goss grains under the present conditions. - Highlights: • A 0.23 mm twin-roll cast grain-oriented silicon steel sheet was produced. • Goss orientation originated during twin-roll casting. • Secondary recrystallization behavior was briefly investigated. • γ-fiber texture was enhanced prior to the onset of secondary recrystallization. • A complete secondary recrystallization microstructure was produced.

  15. Experimental validation of the twins prediction program for rolling noise. Pt.2: results

    NARCIS (Netherlands)

    Thompson, D.J.; Fodiman, P.; Mahé, H.

    1996-01-01

    Two extensive measurement campaigns have been carried out to validate the TWINS prediction program for rolling noise, as described in part 1 of this paper. This second part presents the experimental results of vibration and noise during train pass-bys and compares them with predictions from the

  16. On twinning and anisotropy in rolled Mg alloy AZ31 under uniaxial tension

    Directory of Open Access Journals (Sweden)

    Guo Xiaoqian

    2016-01-01

    Full Text Available The Elastic Visco-Plastic Self-Consistent (EVPSC model, with the recently developed Twinning and De-Twinning (TDT description, is applied to study the mechanical behaviour of hot-rolled Mg alloy AZ31 under uniaxial tension. Numerical results are compared to the experimental uniaxial tensile tests reported earlier by Chapuis et al. [29] for the out-of-plane directions of a thick plate along angles of α = 0°, 30°, 45°, 60° and 90° between the normal direction and longitudinal specimen axis. It is shown that accounting for the initial texture and calibrating the EVPSC-TDT model by using uniaxial tension tests along the rolling direction and normal direction permits prediction of the strength anisotropy and strain hardening behavior along all five tensile directions, i.e. for cases in which the contribution of twinning is dominating, negligible or intermediate.

  17. Mechanical properties of homogenized twin-roll cast and conventionally cast AZ31 magnesium alloys

    Directory of Open Access Journals (Sweden)

    Mariia Zimina

    2015-02-01

    Full Text Available The improvement of mechanical properties of magnesium alloys nowadays is very important, because of the variety of industrial applications. For this goal, the number of casting techniques and further treatments were developed. Among the continuous casting techniques, which allow producing long strips of the alloys, is twin-roll casting. Using this process one can get the magnesium alloy with finest microstructure and higher specific strength. In this paper the comparison of tensile properties of conventionally cast and twin-roll cast AZ31 magnesium alloys was made. Tensile tests were carried out with constant strain rate 10-3 s-1 at temperatures ranging from 100 to 300 °C. Both materials were tested in as-cast state and after homogenization treatment at 450 °C for 10 hours. The investigation showed that there are no significant changes in ductility of AZ31 conventionally cast alloy even after heat treatment, while the ductility of twin-roll cast alloy increases.

  18. Novel twin-roll-cast Ti/Al clad sheets with excellent tensile properties.

    Science.gov (United States)

    Kim, Dae Woong; Lee, Dong Ho; Kim, Jung-Su; Sohn, Seok Su; Kim, Hyoung Seop; Lee, Sunghak

    2017-08-14

    Pure Ti or Ti alloys are recently spot-lighted in construction industries because they have excellent resistance to corrosions, chemicals, and climates as well as various coloring characteristics, but their wide applications are postponed by their expensiveness and poor formability. We present a new fabrication process of Ti/Al clad sheets by bonding a thin Ti sheet on to a 5052 Al alloy melt during vertical-twin-roll casting. This process has merits of reduced production costs as well as improved tensile properties. In the as-twin-roll-cast clad sheet, the homogeneously cast microstructure existed in the Al alloy substrate side, while the Ti/Al interface did not contain any reaction products, pores, cracks, or lateral delamination, which indicated the successful twin-roll casting. When this sheet was annealed at 350 °C~600 °C, the metallurgical bonding was expanded by interfacial diffusion, thereby leading to improvement in tensile properties over those calculated by a rule of mixtures. The ductility was also improved over that of 5052-O Al alloy (25%) or pure Ti (25%) by synergic effect of homogeneous deformation due to excellent Ti/Al bonding. This work provides new applications of Ti/Al clad sheets to lightweight-alloy clad sheets requiring excellent formability and corrosion resistance as well as alloy cost saving.

  19. Continuum modeling of {10Ῑ2} twinning in a Mg-3%Al-1%Zn rolled sheet

    Directory of Open Access Journals (Sweden)

    Pérez-Prado, M. T.

    2010-12-01

    Full Text Available Acrystal plasticity continuum model with differentiated self- and cross- hardeningmechanisms for twin and slip systems has been utilized to predict the slip/twin activities and texture evolution in a rolled and annealed Mg-3%Al-1%Zn sheet compressed along the rolling direction (RD and tensile tested along the normal direction (ND. The contribution of twinning is significantly larger during tension along ND, leading to a significant texture change with strain. A good correlation is found between simulations and recent experimental results.

    Un modelo continuo de plasticidad cristalina, que contempla los mecanismos de auto-endurecimiento y endurecimiento cruzado para los sistemas de maclado y deslizamiento, se ha utilizado para predecir las actividades de deslizamiento y del maclado, así como la evolución de la textura, de una chapa laminada y recocida de la aleación de magnesio Mg-3%Al-1%Zn ensayada en compresión, a lo largo de la dirección de laminación (DL y en tensión, a lo largo de la dirección normal (DN. Se encontró que la contribución del maclado es mucho más importante cuando la muestra se tensiona a lo lago de DN, lo que da lugar a un cambio fuerte de textura. Se observó una buena correspondencia entre las simulaciones y resultados experimentales recientes.

  20. Abating recrystallization inhomogeneity in twin-roll cast 3003 aluminum sheet by electromagnetic fields

    Science.gov (United States)

    Chen, Gang; You, Tao; Xu, Guangming

    2018-01-01

    Recrystallization inhomogeneity is a typical problem in twin-roll cast Al-Mn alloys. A compound field is applied during twin-roll casting of 3003 aluminum sheet to investigate its effects on the final recrystallization structure of the cold rolled and annealed sheet. Dendrite arms in the as-cast sheet are refined and become uniform after applying the field. The arm size range decreases from 5 to 15 μm to 5-8 μm. Two-step homogenization results in more nucleation particles and finer recrystallization structure than single-step routine does in both sheets. More nucleation particles are formed and evenly distributed in the field sheet under the same homogenization routine as a result of more uniformly distributed elements and grain size in the as-cast sheet. The recrystallization inhomogeneity is abated and eliminated by the compound field. Recrystallization grain size in the field sheet after 600 °C × 15 h + 500 °C × 15 h annealing is reduced to 30 μm × 60 μm and distributes evenly along sheet thickness.

  1. The development of uranium foil farication technology utilizing twin roll method for Mo-99 irradiation target

    CERN Document Server

    Kim, C K; Park, H D

    2002-01-01

    MDS Nordion in Canada, occupying about 75% of global supply of Mo-99 isotope, has provided the irradiation target of Mo-99 using the rod-type UAl sub x alloys with HEU(High Enrichment Uranium). ANL (Argonne National Laboratory) through co-operation with BATAN in Indonesia, leading RERTR (Reduced Enrichment for Research and Test Reactors) program substantially for nuclear non-proliferation, has designed and fabricated the annular cylinder of uranium targets, and successfully performed irradiation test, in order to develop the fabrication technology of fission Mo-99 using LEU(Low Enrichment Uranium). As the uranium foils could be fabricated in laboratory scale, not in commercialized scale by hot rolling method due to significant problems in foil quality, productivity and economic efficiency, attention has shifted to the development of new technology. Under these circumstances, the invention of uranium foil fabrication technology utilizing twin-roll casting method in KAERI is found to be able to fabricate LEU or...

  2. Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, A. [IITB-Monash Research Academy, IIT Bombay (India); Department of Metallurgical Engineering and Materials Science, IIT Bombay (India); Department of Materials Engineering, Monash University (Australia); Samajdar, I. [Department of Metallurgical Engineering and Materials Science, IIT Bombay (India); Nie, J.F. [Department of Materials Engineering, Monash University (Australia); Tewari, A., E-mail: asim.tewari@iitb.ac.in [Department of Mechanical Engineering, IIT Bombay (India)

    2016-04-15

    The evolution of microstructure under static annealing was studied for mid-thickness section of a twin-roll-cast (TRC) magnesium alloy. Annealing was performed at 300 °C and 500 °C for different times. Microstructural evolution was quantitatively analyzed, from optical micrographs, using grain path envelope analysis. Additional information from electron backscatter diffraction (EBSD) was used for addressing the possible mechanism(s). It was found that the TRC structure had a bimodal grain size, which was preserved even after annealing at 300 °C. However, the annealing at 500 °C led to a unimodal grain size. This difference in the grain size distribution created a contrasting behavior in the normalized standard deviations. This was primarily attributed to a competition between recovery and recrystallization, and their respective dominance at 300° and 500 °C. A deformation induced recrystallization recovery (DIRR) model was proposed. The proposed model could successfully address the experimental microstructural evolution. - Highlights: • Annealing of twin roll cast (TRC) magnesium alloy was done at temperatures of 300 °C and 500 °C. • TRC had bimodal structure. Bimodality preserved for annealing at 300 °C. Annealing at 500 °C led to unimodal structure. • Grain evolution was described based on the competition between recovery and recrystallization. • Deformation induced recrystallization recovery (DIRR) mechanistic model was developed.

  3. Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy

    International Nuclear Information System (INIS)

    Tripathi, A.; Samajdar, I.; Nie, J.F.; Tewari, A.

    2016-01-01

    The evolution of microstructure under static annealing was studied for mid-thickness section of a twin-roll-cast (TRC) magnesium alloy. Annealing was performed at 300 °C and 500 °C for different times. Microstructural evolution was quantitatively analyzed, from optical micrographs, using grain path envelope analysis. Additional information from electron backscatter diffraction (EBSD) was used for addressing the possible mechanism(s). It was found that the TRC structure had a bimodal grain size, which was preserved even after annealing at 300 °C. However, the annealing at 500 °C led to a unimodal grain size. This difference in the grain size distribution created a contrasting behavior in the normalized standard deviations. This was primarily attributed to a competition between recovery and recrystallization, and their respective dominance at 300° and 500 °C. A deformation induced recrystallization recovery (DIRR) model was proposed. The proposed model could successfully address the experimental microstructural evolution. - Highlights: • Annealing of twin roll cast (TRC) magnesium alloy was done at temperatures of 300 °C and 500 °C. • TRC had bimodal structure. Bimodality preserved for annealing at 300 °C. Annealing at 500 °C led to unimodal structure. • Grain evolution was described based on the competition between recovery and recrystallization. • Deformation induced recrystallization recovery (DIRR) mechanistic model was developed.

  4. Effects of hot rolled microstructure after twin-roll casting on microstructure, texture and magnetic properties of low silicon non-oriented electrical steel

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Hai-Tao, E-mail: liuht@ral.neu.edu.cn; Wang, Yin-Ping; An, Ling-Zi; Wang, Zhao-Jie; Hou, Dao-Yuan; Chen, Jun-Mou; Wang, Guo-Dong

    2016-12-15

    In this work, a 0.71 wt%Si+0.44 wt%Al as-cast strip was produced by novel twin-roll casting. Some as-cast samples were respectively reheated and hot rolled at different temperatures in order to obtain different microstructure prior to cold rolling and annealing. The effects of the hot rolled microstructure on microstructure, texture evolution and magnetic properties were investigated in detail. A coarse deformed microstructure with λ-fiber texture was formed after hot rolling at 850–1050 °C, finally leading to an inhomogeneous recrystallization microstructure with strong λ-fiber, Goss and extremely weak γ-fiber texture. By contrast, a fine transformed microstructure was formed after hot rolling at 1150–1250 °C, finally leading to a fine and homogeneous recrystallization microstructure with stronger α-fiber, γ-fiber and much weaker λ-fiber texture. It should be noted that both the magnetic induction and core loss non-monotonically decreased or increased according to the hot rolling temperature. The unfavorable α-fiber and γ-fiber textures in the annealed sheets were much weaker than those of the conventional products regardless of the hot rolling temperature, thus contributing to a much higher magnetic induction. However, the average grain size in the annealed sheets was much lower than those of the conventional products regardless of the hot rolling temperature, thus leading to a higher core loss except the case of 1050 °C. Hence, it is underscored that better integrated magnetic properties than those of the conventional products can be obtained by optimizing the hot rolled microstructure to produce final desirable recrystallization microstructure and texture. - Highlights: • Non-oriented silicon steel was fabricated using twin-roll casting route. • Microstructure and texture evolution were clarified. • Effects of the hot rolled microstructure were investigated in detail. • Formation mechanism of the recrystallization texture was explored.

  5. Review of the continuous casting of steel by strip casting technology. Twin roll method system

    International Nuclear Information System (INIS)

    Ibarrondo, I.

    2008-01-01

    In order to compete in the future steel market and to maintain market share, the steel makers will need to use new efficient technologies capable of supplying steel strip products of high quality at low cost. In this way, the strip casting technology by twin rol method is one of the most important research are in the iron and steel industry today. This review makes a general description of the strip casting technology as well as its different steps, such us; metal delivery and casting, solidification process, hot rolling reduction step, etc. Through mathematical and physical models, the influence on microstructure texture surface quality and mechanical properties of the materials obtained by this method are described as a function of processing parameters, specially the roughness of the rolls. the manufacturing of carbon, stainless and electrical steels involves smaller capital and operating cost, lower gas emissions, and an opportunity to create new grades due to a faster solidification rate that leads to a different solidification structures. In sight of all this it is likely that Strip Casting technology will make a profound impact on the manufacturing landscape of the 21 s t century. (Author) 177 refs

  6. Microstructure and mechanical properties of twin-roll cast Mg-4.5Al-1.0Zn sheets processed by differential speed rolling

    International Nuclear Information System (INIS)

    Gong, Xibing; Li, Hao; Kang, Suk Bong; Cho, Jae Hyung; Li, Saiyi

    2010-01-01

    The microstructure and mechanical properties of the twin-roll cast (TRC) Mg-4.5Al-1.0Zn alloy sheets produced by differential speed rolling (DSR) were investigated by optical microscopy, transmission electron microscope and electron backscattered diffraction. The results are compared with those of the sheet processed by equal speed rolling (ESR). It is shown that twining played an important role at the initial stage of rolling. With the increase of the rolling reduction, the microstructures in the processed sheets become more homogeneous and they are more refined by DSR than by ESR. After annealing, the sheet processed by DSR shows a higher elongation and slightly lower yield strength than those of the ESR-processed sheet, which could be attributed to grain refinement and texture weakening. These results suggest that, in comparison with conventional casting and rolling, the combined technology of TRC and DSR is a more effective way to process magnesium sheets with enhanced formability after final annealing.

  7. Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification During the Twin-Roll Continuous Casting of Steel and Aluminum

    Science.gov (United States)

    Xu, Mianguang; Zhu, Miaoyong

    2016-02-01

    The commercialization of aluminum twin-roll casting was realized in the early 1950s, while it is still a dream for engineers to produce steel strip by this process. In the present paper, a two-dimensional mathematical model is employed to study the fluid flow, heat transfer, and solidification during the twin-roll casting for both steel and aluminum. The turbulent flow in the pool is examined using the Lam and Bremhorst low-Reynolds-number turbulence model. In order to facilitate the comparison and analysis, a new transformed coordinate system ( r, φ) is established. Characteristics of the momentum boundary layer and the solidification front are described. Reasons of the formation of the wedge-shaped zone near the surface of rotating roll are given. In the transformed coordinate system ( r, φ), the effect of the centrifugal force induced by the rotating roll is presented using the velocity component in the r direction and the pressure gradient in the r direction. At last, the evaluation of the solidified shell in the pool is analyzed. The results show that the twin-roll casting is a roll-rotating-driven process. The variation of the thickness of the momentum boundary layer can be divided into three stages and its thickness is very uniform at the last stage. Near the roll surface, there exists a wedge-shaped zone induced by the near-roll-surface shear flow that washes the mushy zone front, which increases the depth of the liquid pool and decreases the length of the rolling region. The rotating roll gives rise to the stirring effect to the pool region and the metal is moving away from the roll surface in the positive radial velocity region, and the effect of the centrifugal force becomes weak in the lower part of the pool. At the solidification front, the non-dimensional effective heat transfer coefficient distribution in steel twin-roll casting is larger than that in aluminum twin-roll casting. Considering that the turbulence level is determined by the flow

  8. Development of wheelchair caster testing equipment and preliminary testing of caster models

    Directory of Open Access Journals (Sweden)

    Anand Mhatre

    2017-09-01

    Conclusion: The new caster test system has the capability to incorporate necessary test factors that degrade caster quality in LREs. Future work includes developing and validating a testing protocol that results in failure modes common during wheelchair use in LRE.

  9. Effect of Cold Rolling Reduction Rate on Corrosion Behaviour of Twin-roll Cast 8006 Aluminium Alloys

    OpenAIRE

    KÜÇÜK, İsrafil

    2018-01-01

    Utilization of aluminum alloys in automotive industry takes a crucial role in recent years due to their excellent properties such as corrosion resistance and light weight. 3003 and 8006 aluminum alloys have been particularly used as a heat exchanger compartment due to their corrosion resistance feature which has a perfect match for a heat exchanger fin stocks and a destructive salty environment in this car’s part. In the present work, an effect of cold rolling reduction (CRR) rate on the corr...

  10. Grain refinement of Ca addition in a twin-roll-cast Mg-3Al-1Zn alloy

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Bin, E-mail: jiangbinrong@cqu.edu.cn [National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030 (China); College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Liu Wenjun [College of Materials Science and Engineering, Chongqing University, Chongqing 400030 (China); Qiu Dong; Zhang Mingxing [Division of Materials, School of Mechanical and Mining Engineering, University of Queensland, St Lucia, QLD 4072 (Australia); Pan Fusheng [National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030 (China)

    2012-04-16

    Highlights: Black-Right-Pointing-Pointer Grain refinement of Ca addition in a twin-roll-cast Mg-3Al-1Zn alloy was investigated. Black-Right-Pointing-Pointer Addition of 0.08 wt% Ca into Mg melts can significantly reduce the grain size to 30 {mu}m from 100 {mu}m. Black-Right-Pointing-Pointer Al{sub 2}Ca intermetallic particles have high potency to act as heterogeneous nucleation sites for {alpha}-Mg. - Abstract: Addition of 0.08 wt% Ca into AZ31 melts significantly reduces the average grain size of thin strips produced by twin-roll-cast to 30 {mu}m from 100 {mu}m. Like Zr, due to the high chemical activity, the Ca added into the melts reacts with Al and forms Al{sub 2}Ca intermetallic compound. X-ray diffraction result approves the existence of Al{sub 2}Ca in the thin strips, which formed in the melts. Crystallographic examination of relationship between Al{sub 2}Ca and Mg using the edge-to-edge matching model indicates that Al{sub 2}Ca particles are effective inoculants for heterogeneous nucleation of Mg. It is considered that Al{sub 2}Ca is a potential and effective grain refiner for Mg alloys and the grain refinement through addition of Ca in the AZ31 alloy is attributed to the inoculation effect of Al{sub 2}Ca particles formed in the melts.

  11. Investigation of the Microstructure Evolution and Deformation Mechanisms of a Mg-Zn-Zr-RE Twin-Roll-Cast Magnesium Sheet by In-Situ Experimental Techniques

    Czech Academy of Sciences Publication Activity Database

    Máthis, K.; Horváth, Klaudia; Farkas, Gergely; Choe, H.; Shin, K. S.; Vinogradov, A.

    2018-01-01

    Roč. 11, č. 2 (2018), č. článku 200. ISSN 1996-1944 R&D Projects: GA ČR GB14-36566G; GA MŠk EF16_013/0001794 Institutional support: RVO:61389005 Keywords : magnesium * twin roll casting * neutron diffraction * acoustic emission * twinning * yield strength Subject RIV: JL - Materials Fatigue, Friction Mechanics OBOR OECD: Audio engineering, reliability analysis Impact factor: 2.654, year: 2016

  12. On the possible importance of mechanical twinning for the development of the brass-type rolling texture and final comment on the above remarks by T. Leffers

    DEFF Research Database (Denmark)

    Leffers, Torben

    1970-01-01

    The author presents his final comments on the discussion between himself and Heye and Wasserman (see abstrs. A11834 and A11835 of 1970) which arose from the latter authors' paper on mechanical twinning (see abstr. A19815 of 1969). The validity of the twinning theory for the brass-type rolling...... texture is questioned for two reasons: There is no convincing crystallographic model explaining how the formation of the brass-type texture by combined twinning and slip should work in theory, and there are experimental results indicating that it should not work in practice...

  13. Impact of as-cast structure on structure and properties of twin-roll cast AA8006 alloy

    Energy Technology Data Exchange (ETDEWEB)

    Slamova, M.; Ocenasek, V. [Vyzkumny Ustav Kovu, Panenske Brezany (Czechoslovakia); Juricek, Z.

    2000-07-01

    Sheet production by twin-roll casting (TRC) process is a well established practice in the aluminium industry because it offers several advantages in comparison with DC casting and hot rolling, esp. lower production and investment costs. Thin strips exhibiting a combination of good strength and high ductility are required for various applications and for this reason alloys with higher Fe and Mn content such as AA 8006 displace AA 1xxx or AA 8011 alloys. However, TRC of AA 8006 strips involves several problems, e.g. casting conditions and subsequent treatment procedures need fine tuning. The results of an investigation of the effect of casting conditions on structure and properties of AA 8006 strips are presented. The influence of casting speed, grain refiner addition, molten metal level in the tundish, tip setback and roll separating force was investigated. The impact of imperfect as-cast structure on structure and properties of thin strips in H22 and O tempers was evaluated and compared with strips from good as-cast material. (orig.)

  14. Abatement of segregation with the electro and static magnetic field during twin-roll casting of 7075 alloy sheet

    Energy Technology Data Exchange (ETDEWEB)

    Su, X. [The Key Laboratory of Electromagnetic Processing of Material, Ministry of Education, 317#, Northeastern University, Shenyang, 110819 Liaoning (China); Xu, G.M., E-mail: Xu_gm@epm.neu.edu.cn [The Key Laboratory of Electromagnetic Processing of Material, Ministry of Education, 317#, Northeastern University, Shenyang, 110819 Liaoning (China); Jiang, D.H. [Donggong Information Science and Technology Co., Ltd., Guangzhou, 510000 Guangdong (China)

    2014-04-01

    This study aims to investigate the influence of electromagnetic field on the distribution and composition of precipitates and on the mechanical properties of 7075 rolled sheets. The non-field and field microstructure and the mechanical properties were studied in detail by optical microscope (OM), electron probe microanalyzer (EPMA), multiple sample tensile as well as hardness tests. The Fine and equiaxed grains were obtained when introducing the alternating oscillating electromagnetic field to the twin-roll casting (TRC) process with 0.13 T static magnetic and 386 A alternating current (AC) intensities. Due to a damping effect on the convection generated by applying the electro- and static magnetic fields, the undercooling of the melt decreases and the continuous net-like precipitates are refined and broken remarkably. Especially under oscillating electromagnetic field conditions, the best uniform microstructure without mottled segregation was obtained. In addition, the fields can effectively enhance solute mixing capacity and reduce heat discharge, resulting in the increase of mechanical properties of 7075 sheets in both the longitudinal and long transverse directions. The optimum process in the present study, in which the higher solid solubility in Al matrix and the stronger hardness as well as tensile strength was gained as compared to other rolled specimens, is considered as alternating oscillating TRC process.

  15. Wheelchair caster loading during frontal impact.

    Science.gov (United States)

    Bertocci, Gina E; van Roosmalen, Linda

    2003-01-01

    Many wheelchair users are required or choose to use their wheelchairs as a motor vehicle seat during transport. It is therefore key that the wheelchair components be designed to tolerate crash-level loading conditions. Casters are particularly prone to failure under crash loading conditions. Our study evaluated wheelchair caster loading during 20g/48 kph frontal sled impact testing using an 85-kg surrogate wheelchair base (SWCB) with casters positioned on a load-measuring platform. A Hybrid III 50th percentile male test dummy was seated in the SWCB, which simulated a power wheelchair and was secured using four-point tiedowns. Various rear securement point heights and wheelchair seating systems were used to study their effect on caster loading. Caster normal loading was found to vary from 769 to 7,209 N depending on rear securement location and integrity of the seating system. Dynamic sled impact test results showed that normal loading of the front wheelchair casters was influenced by wheelchair seating system integrity and rear wheelchair securement height. Shear loading varied from 781 to 1,589 N and did not appear to be dependent on seat integrity or rear securement height. The load/time histories measured during dynamic impact testing can be used to guide the development of transit-safe caster design.

  16. Microstructural Analysis of Severe Plastic Deformed Twin Roll Cast AZ31 for the Optimization of Superplastic Properties

    Energy Technology Data Exchange (ETDEWEB)

    Young, John P.; Askari, Hesam A.; Heiden, Michael J.; Hovanski, Yuri; Field, David P.; Zbib, Hussein M.

    2013-07-08

    In recent years magnesium alloys have attracted significant attention as potential candidates to replace many of the heavier metals used in some automotive applications. However, the limited formability of magnesium and its alloys at room temperature has driven interest in the superplastic forming magnesium as an alternative shaping method. Severe plastic deformation techniques have become a well studied method of refining the grain size and modifying the microstructural characteristics of many magnesium alloys to achieve greater superplastic properties. In this study twin roll cast (TRC) AZ31 magnesium alloy was subjected to equal channel angular pressing (ECAP) and friction stir welding (FSW). The influence of these severe plastic deformation processes on the grain size, texture and grain boundary character distribution was investigated to identify the optimum severe plastic deformation process for the superplastic forming of AZ31.

  17. Development of wheelchair caster testing equipment and preliminary testing of caster models.

    Science.gov (United States)

    Mhatre, Anand; Ott, Joseph; Pearlman, Jonathan

    2017-01-01

    Because of the adverse environmental conditions present in less-resourced environments (LREs), the World Health Organization (WHO) has recommended that specialised wheelchair test methods may need to be developed to support product quality standards in these environments. A group of experts identified caster test methods as a high priority because of their common failure in LREs, and the insufficiency of existing test methods described in the International Organization for Standardization (ISO) Wheelchair Testing Standards (ISO 7176). To develop and demonstrate the feasibility of a caster system test method. Background literature and expert opinions were collected to identify existing caster test methods, caster failures common in LREs and environmental conditions present in LREs. Several conceptual designs for the caster testing method were developed, and through an iterative process using expert feedback, a final concept and a design were developed and a prototype was fabricated. Feasibility tests were conducted by testing a series of caster systems from wheelchairs used in LREs, and failure modes were recorded and compared to anecdotal reports about field failures. The new caster testing system was developed and it provides the flexibility to expose caster systems to typical conditions in LREs. Caster failures such as stem bolt fractures, fork fractures, bearing failures and tire cracking occurred during testing trials and are consistent with field failures. The new caster test system has the capability to incorporate necessary test factors that degrade caster quality in LREs. Future work includes developing and validating a testing protocol that results in failure modes common during wheelchair use in LRE.

  18. Use of Hot Rolling for Generating Low Deviation Twins and a Disconnected Random Boundary Network in Inconel 600 Alloy

    Science.gov (United States)

    Sahu, Sandeep; Yadav, Prabhat Chand; Shekhar, Shashank

    2018-02-01

    In this investigation, Inconel 600 alloy was thermomechanically processed to different strains via hot rolling followed by a short-time annealing treatment to determine an appropriate thermomechanical process to achieve a high fraction of low-Σ CSL boundaries. Experimental results demonstrate that a certain level of deformation is necessary to obtain effective "grain boundary engineering"; i.e., the deformation must be sufficiently high to provide the required driving force for postdeformation static recrystallization, yet it should be low enough to retain a large fraction of original twin boundaries. Samples processed in such a fashion exhibited 77 pct length fraction of low-Σ CSL boundaries, a dominant fraction of which was from Σ3 ( 64 pct), the latter with very low deviation from its theoretical misorientation. The application of hot rolling also resulted in a very low fraction of Σ1 ( 1 pct) boundaries, as desired. The process also leads to so-called "triple junction engineering" with the generation of special triple junctions, which are very effective in disrupting the connectivity of the random grain boundary network.

  19. Investigation of the Microstructure Evolution and Deformation Mechanisms of a Mg-Zn-Zr-RE Twin-Roll-Cast Magnesium Sheet by In-Situ Experimental Techniques.

    Science.gov (United States)

    Máthis, Kristián; Horváth, Klaudia; Farkas, Gergely; Choe, Heeman; Shin, Kwang Seon; Vinogradov, Alexei

    2018-01-27

    Twin roll casting (TRC), with a relatively fast solidification rate, is an excellent production method with promising potential for producing wrought semi or final Mg alloy products that can often suffer from poor formability. We investigate in this study the effect of the TRC method and the subsequent heat treatment on the microstructure and deformation mechanisms in Mg-Zn-Zr-Nd alloy deformed at room temperature using the in-situ neutron diffraction and acoustic emission techniques and ex-situ texture measurement and microscopy, respectively. Although a higher work hardening is observed in the rolling direction due to the more intensive -type dislocation activity, the difference in the mechanical properties of the specimens deformed in the RD and TD directions is small in the as-rolled condition. An additional heat treatment results in recrystallization and significant anisotropy in the deformation. Due to the easier activation of the extension twinning in the TD given by texture, the yield stress in the TD is approximately 40% lower than that in the RD.

  20. Influence of wheelchair front caster wheel on reverse directional stability.

    Science.gov (United States)

    Guo, Songfeng; Cooper, Rory A; Corfman, Tom; Ding, Dan; Grindle, Garrett

    2003-01-01

    The purpose of this research was to study directional stability during reversing of rear-wheel drive, electric powered wheelchairs (EPW) under different initial front caster orientations. Specifically, the weight distribution differences caused by certain initial caster orientations were examined as a possible mechanism for causing directional instability that could lead to accidents. Directional stability was quantified by measuring the drive direction error of the EPW by a motion analysis system. The ground reaction forces were collected to determine the load on the front casters, as well as back-emf data to attain the speed of the motors. The drive direction error was found to be different for various initial caster orientations. Drive direction error was greatest when both casters were oriented 90 degrees to the left or right, and least when both casters were oriented forward. The results show that drive direction error corresponds to the loading difference on the casters. The data indicates that loading differences may cause asymmetric drag on the casters, which in turn causes unbalanced torque load on the motors. This leads to a difference in motor speed and drive direction error.

  1. Evolution and interaction of twins, dislocations and stacking faults in rolled α-brass during nanostructuring at sub-zero temperature

    Directory of Open Access Journals (Sweden)

    Barna Roy

    2014-06-01

    Full Text Available The effect of cryorolling (CR strain at 153 K on the evolution of structural defects and their interaction in α−brass (Cu–30 wt.% Zn during nanostructuring has been evaluated. Even though the lattice strain increases up to 2.1 × 10−3 at CR strain of 0.6 initially, but it remains constant upon further rolling. Whereas, the twin density (β increases to a maximum value of 5.9 × 10−3 at a CR strain of 0.7 and reduces to 1.1 × 10−5 at 0.95. Accumulation of stacking faults (SFs and lattice disorder at the twin boundaries causes dynamic recrystallization, promotes grain refinement and decreases the twin density by forming subgrains. Detailed investigations on the formation and interaction of defects have been done through resistivity, positron lifetime and Doppler broadening measurements in order to understand the micro-mechanism of nanostructuring at sub-zero temperatures.

  2. Ultra-thin grain-oriented silicon steel sheet fabricated by a novel way: Twin-roll strip casting and two-stage cold rolling

    Science.gov (United States)

    Wang, Yin-Ping; Liu, Hai-Tao; Song, Hong-Yu; Liu, Jia-Xin; Shen, Hui-Ying; Jin, Yang; Wang, Guo-Dong

    2018-04-01

    0.05-0.15 mm-thick ultra-thin grain-oriented silicon steel sheets were successfully produced by a novel processing route including strip casting, hot rolling, normalizing, two-stage cold rolling with intermediate annealing, primary recrystallization annealing and secondary recrystallization annealing. The evolutions of microstructure, texture and inhibitor along the processing were briefly investigated. The results showed that the initial Goss orientation originated due to the heterogenous nucleation of δ-ferrite grains during solidification. Because of the lack of shear deformation, only a few Goss grains were observed in the hot rolled sheet. After the first cold rolling and intermediate annealing, Goss texture was enhanced and distributed in the whole thickness. A small number of Goss grains having a high fraction of high energy boundaries exhibited in the primary recrystallization annealed sheet. A large number of fine and dispersed MnS and AlN and a few co-precipitates MnS and AlN with the size range of 10-70 nm were also observed. Interestingly, a well-developed secondary recrystallization microstructure characterized by 10-60 mm grains and a sharp Goss texture were finally produced in the 0.05-0.15 mm-thick ultra-thin sheets. A magnetic induction B8 of 1.72-1.84 T was obtained. Another new finding was that a few {2 3 0}〈0 0 1〉 and {2 1 0}〈1 2 7〉 grains also can grow up abnormally because of the high fraction of high energy boundaries and the size and number advantage, respectively. These non-Goss grains finally deteriorated the magnetic properties of the ultra-thin sheets. In addition, low surface energies of {hk0} planes may also contribute to the abnormal growth of Goss, {2 3 0}〈0 0 1〉 and {2 1 0}〈1 2 7〉 grains.

  3. The chiropractic heritage of Paul Caster: magnetic healer.

    Science.gov (United States)

    Jackson, R B

    1996-12-01

    Magnetic healers were a phenomenon in America's heartland, from Iowa, Kansas, Missouri in Illinois in the late 1860s. Three noted magnetics in this region were Paul Caster, Andrew Still and Daniel Palmer; the first and third would have a chiropractic legacy, while Dr. Andrew Taylor Still would found osteopathy. This is the story of the chiropractic heritage from Paul Caster via his son, Jacob, to his grandson, Charles E. Caster, D.C. Magnetic healing in this family was considered by Paul to be a divine gift, while Still and Palmer would be rejected by the clergy and believed their skills could be learned, thus passed on.

  4. Development of wheelchair caster testing equipment and preliminary testing of caster models

    OpenAIRE

    Mhatre, Anand; Ott, Joseph; Pearlman, Jonathan

    2017-01-01

    Background: Because of the adverse environmental conditions present in less-resourced environments (LREs), the World Health Organization (WHO) has recommended that specialised wheelchair test methods may need to be developed to support product quality standards in these environments. A group of experts identified caster test methods as a high priority because of their common failure in LREs, and the insufficiency of existing test methods described in the International Organization for Standar...

  5. Caster Semenya: sport, categories and the creative role of ethics.

    Science.gov (United States)

    Camporesi, Silvia; Maugeri, Paolo

    2010-06-01

    Caster Semenya, a South African 18-year-old, won the 800-metre track running title at the Berlin World Athletics Championships in 2009. Only 3 h later, her gender was being harshly contested. The investigation of the International Association of Athletics Federations (IAAF) was neither discreet nor respectful of her privacy. Caster's case has implications for the ethics of sports and debates about gender and enhancement, and for the philosophical debate about the nature of categories and the classification of people. The IAAF has not disclosed the results of their tests on Caster, and the South African Ministry of Sport has decreed that in any case she can continue running with women in her own country. But could a scientific or medical test offer uncontroversial answers regarding Caster's gender? The concept of 'gender' is partly a social construction. The authors argue that ethics may guide science and medicine at addressing such questions.

  6. The CASTER Black Hole Finder Probe

    International Nuclear Information System (INIS)

    McConnell, M. L.; Bloser, P. F.; Macri, J. R.; Ryan, J. M.; Case, G. L.; Stacy, J. G.; Cherry, M. L.; Guzik, T. G.; Schaefer, B.; Wefel, J. P.; Cravens, J.; Hurley, K.; Kippen, R. M.; Vestrand, W. T.; Miller, R. S.; Paciesas, W.

    2006-01-01

    The primary scientific mission of the Black Hole Finder Probe (BHFP), part of the NASA Beyond Einstein program, is to survey the local Universe for black holes over a wide range of mass and accretion rate. One approach to such a survey is a hard X-ray coded-aperture imaging mission operating in the 10-600 keV energy band. The development of new inorganic scintillator materials provides improved performance that is well suited to the BHFP science requirements. Detection planes formed with these materials coupled with a new generation of readout devices represent a major advancement in the performance capabilities of scintillator-based gamma cameras. Here, we discuss the Coded Aperture Survey Telescope for Energetic Radiation (CASTER), a concept that represents a BHFP based on the use of the latest scintillator technology

  7. On numerical modeling of low-head direct chill ingot caster for magnesium alloy AZ31

    Directory of Open Access Journals (Sweden)

    Mainul Hasan

    2014-12-01

    Full Text Available A comprehensive 3D turbulent CFD study has been carried out to simulate a Low-Head (LH vertical Direct Chill (DC rolling ingot caster for the common magnesium alloy AZ31. The model used in this study takes into account the coupled laminar/turbulent melt flow and solidification aspects of the process and is based on the control-volume finite-difference approach. Following the aluminum/magnesium DC casting industrial practices, the LH mold is taken as 30 mm with a hot top of 60 mm. The previously verified in-house code has been modified to model the present casting process. Important quantitative results are obtained for four casting speeds, for three inlet melt pouring temperatures (superheats and for three metal-mold contact heat transfer coefficients for the steady state operational phase of the caster. The variable cooling water temperatures reported by the industry are considered for the primary and secondary cooling zones during the simulations. Specifically, the temperature and velocity fields, sump depth and sump profiles, mushy region thickness, solid shell thickness at the exit of the mold and axial temperature profiles at the center and at three strategic locations at the surface of the slab are presented and discussed.

  8. A bicycle can be self-stable without gyroscopic or caster effects.

    Science.gov (United States)

    Kooijman, J D G; Meijaard, J P; Papadopoulos, Jim M; Ruina, Andy; Schwab, A L

    2011-04-15

    A riderless bicycle can automatically steer itself so as to recover from falls. The common view is that this self-steering is caused by gyroscopic precession of the front wheel, or by the wheel contact trailing like a caster behind the steer axis. We show that neither effect is necessary for self-stability. Using linearized stability calculations as a guide, we built a bicycle with extra counter-rotating wheels (canceling the wheel spin angular momentum) and with its front-wheel ground-contact forward of the steer axis (making the trailing distance negative). When laterally disturbed from rolling straight, this bicycle automatically recovers to upright travel. Our results show that various design variables, like the front mass location and the steer axis tilt, contribute to stability in complex interacting ways.

  9. POC caster: Broadcasting Agent Using Conversational Representation for Internet Community

    Science.gov (United States)

    Kubota, Hidekazu; Yamashita, Kouji; Fukuhara, Tomohiro; Nishida, Toyoaki

    We propose a broadcating agent system called {\\it POC caster} that generates understandable conversational representation from heterogeneous text-based opinions. POC caster introduces an opinion of a community member by a conversational method in Public Opinion Channel(POC) that is an interactive broadcasting system supporting community knowledge creation. The way to generate conversational representation from an opinion is consist of two processes. The first process is an analysis of an intention of the opinion by referring the last word of a sentence. The second process is applying some rules about intentions and positions of the sentences to make an understandable conversation. The psychological experiments about understandability of generated conversations are described.

  10. Modeling and Simulation of a Simple Cart with Low-Impact Casters

    Directory of Open Access Journals (Sweden)

    Tagami Masaharu

    2016-01-01

    Full Text Available Low-impact casters are of great importance in realizing low-crash and anti-vibration carts for a range of purposes. Here the principle of center of percussion is efficiently applied to a caster in order to suppress the transfer of crash forces to the cart from the caster. Excellent performance of this force suppression has been confirmed previously by both simulation and experiments in a single-caster cart. However, carts in real-life applications usually require four sets of casters. In this context, a mathematical model of a cart with four sets of low-impact casters was formulated. In this paper, the modeling a four-caster cart, and simulations for the cart passing over a bump are discussed.

  11. Shock-absorbing caster wheel is simple and compact

    Science.gov (United States)

    Kindley, R. J.

    1968-01-01

    Compact shock-absorbing caster wheel mitigates or absorbs shock by a compressible tire which deforms into a cavity between its inner edge and the wheel hub. A tee-shaped annular ring embedded in the tire distributes loads more uniformly throughout both wheel and tire.

  12. On the relationship between {11(2)over-bar2} and {11(2)over-bar6} conjugate twins and double extension twins in rolled pure Mg

    Czech Academy of Sciences Publication Activity Database

    Ostapovets, Andriy; Buršík, Jiří; Krahula, Karel; Král, Lubomír; Serra, A.

    2017-01-01

    Roč. 97, č. 14 (2017), s. 1088-1101 ISSN 1478-6435 R&D Projects: GA MŠk(CZ) LQ1601; GA ČR(CZ) GA16-14599S Institutional support: RVO:68081723 Keywords : Magnesium * twinning * grain boudaries Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 1.505, year: 2016

  13. THE EQUATION FOR THE CONTINUOUS INGOT SOLIDIFICATION PROCESS FOR CONTROL SYSTEMS OF CONTINUOUS CASTING CASTER MNLZ

    Directory of Open Access Journals (Sweden)

    I. A. Pugachev

    2013-01-01

    Full Text Available A process of heat transfer in continuous casting mould is considered. The substantiated equations predict shell growth, temperature distributions, solidification rates and can be used for continuous casters control systems.

  14. How to build and teach with QuakeCaster: an earthquake demonstration and exploration tool

    Science.gov (United States)

    Linton, Kelsey; Stein, Ross S.

    2015-01-01

    QuakeCaster is an interactive, hands-on teaching model that simulates earthquakes and their interactions along a plate-boundary fault. QuakeCaster contains the minimum number of physical processes needed to demonstrate most observable earthquake features. A winch to steadily reel in a line simulates the steady plate tectonic motions far from the plate boundaries. A granite slider in frictional contact with a nonskid rock-like surface simulates a fault at a plate boundary. A rubber band connecting the line to the slider simulates the elastic character of the Earth’s crust. By stacking and unstacking sliders and cranking in the winch, one can see the results of changing the shear stress and the clamping stress on a fault. By placing sliders in series with rubber bands between them, one can simulate the interaction of earthquakes along a fault, such as cascading or toggling shocks. By inserting a load scale into the line, one can measure the stress acting on the fault throughout the earthquake cycle. As observed for real earthquakes, QuakeCaster events are not periodic, time-predictable, or slip-predictable. QuakeCaster produces rare but unreliable “foreshocks.” When fault gouge builds up, the friction goes to zero and fault creep is seen without large quakes. QuakeCaster events produce very small amounts of fault gouge that strongly alter its behavior, resulting in smaller, more frequent shocks as the gouge accumulates. QuakeCaster is designed so that students or audience members can operate it and record its output. With a stopwatch and ruler one can measure and plot the timing, slip distance, and force results of simulated earthquakes. People of all ages can use the QuakeCaster model to explore hypotheses about earthquake occurrence. QuakeCaster takes several days and about $500.00 in materials to build.

  15. Interaction model of steel ladle of continuous caster in steel works

    OpenAIRE

    Huang Bang Fu; Ma Zhi Wei; Tian Nai Yuan; Shi Zhe; Zhou Xiao Lei; Cai Jun

    2016-01-01

    For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. A...

  16. Interaction model of steel ladle of continuous caster in steel works

    Directory of Open Access Journals (Sweden)

    Huang Bang Fu

    2016-01-01

    Full Text Available For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. After that, the relationships between turnover number and last turnover number and non-turnover number are researched deeply. Combining with the Gantt chart, the expressions of start casting time and empty ladle ending time and heavy ladle starting time were put forward. The precondition of steel ladle interaction is obtained, which means the exchange ladle should not undertaking transport task in first stop continuous caster, and the empty ladle end time of exchange ladle of first stop continuous caster should early than the heavy ladle start time of last stop continuous caster. After applying the model to practice, 3 steel ladles of No.2 continuous caster can be reduced. This research results is supplying theoretical basis for steel ladle controlling and production organization optimization, and enriches the theory and method of metallurgical process integration.

  17. Thermal cycling fatigue behavior of hardfacing heat-resistant stainless steel for continuous caster rolls

    International Nuclear Information System (INIS)

    Jung, Jae Young; Sung, Hwan Jin; Ahn, Sang Ho

    1998-01-01

    The variation of tensile properties and hardness as a function of tempering temperature and time has been investigated using a hardfacing 12%Cr stainless steel. The mechanical properties of the hardfacing 12%Cr stainless steel could be generalized by the Larson-Miller parameter, which concurrently considers the effects of tempering temperature and time. Thermal cycling fatigue behavior of a hardfacing 12%Cr stainless steel has been investigated using a special thermal fatigue testing apparatus. The resistance of thermal fatigue was deteriorated mainly by the low ductility and true fracture strength of material. The temperature distribution in the specimen was calculated using finite element program and compared to experimental results. The strain and stress distributions were evaluated taking into account the temperature distribution and the temperature dependence of the material properties. The results showed that maximum values of strain and stress were produced within the induction-heating region. The strain amplitude obtained in this study was much smaller than that of fully constrained case, which corresponds to thermal expansion due to temperature difference. This result arises from the reduction of the temperature gradient due to thermal conduction to the neighboring region. The magnitude of strain raised with the increase in the temperature gradient, which is due to the rapid cooling and heating rates in the induction-heating region

  18. Testing and evaluation of wheelchair caster assemblies subjected to dynamic crash loading.

    Science.gov (United States)

    Bertocci, G E; Esteireiro, J; Cooper, R A; Young, T M; Thomas, C

    1999-01-01

    Wheelchair designs based upon loads applied quasi-statically during normal mobility use are apt to be inadequate to handle the increased level of dynamic crash forces that may be encountered when using the wheelchair as a motor vehicle seat. The purpose of this study was to characterize the integrity of wheelchair caster assemblies under simulated crash conditions. This study utilized dynamic drop (DD) testing, with loading levels and rates adjusted to match those found previously in sled impact testing and computer crash simulations. The results verify that current caster assembly designs may not be able to withstand forces associated with a crash. Five of seven evaluated caster assemblies failed when loaded to 8,007 N, or less, at loading rates seen in sled testing. DD testing used in this study is a valuable tool that can be used in the design of transport wheelchair components.

  19. A Mathematical Model to Estimate the Position of Mobile Robot by Sensing Caster Wheel Motion

    Directory of Open Access Journals (Sweden)

    Amarendra Jnana H.

    2018-01-01

    Full Text Available This paper describes the position estimation of mobile robot by sensing caster wheel motion. A mathematical model is developed to determine the position of mobile robot by sensing the angular velocity and heading angle of the caster wheel. Using the established equations, simulations were carried out using MATLAB version 8.6 to observe and verify the position coordinates of mobile robot and in turn obtain its trajectory. The simulation results show that the angular velocity of caster wheel and heading angle calculated from the sensor output readings with the help of inverse kinematics equations matches well with that of actual values given as input for simulation. Simulation result of tracking rectangular trajectory implies that the path traced by the mobile robot can also be determined from the sensor output readings. This concept can be implemented on a real mobile robot for estimation of its position.

  20. Spray Rolling Aluminum Strip

    Energy Technology Data Exchange (ETDEWEB)

    Lavernia, E.J.; Delplanque, J-P; McHugh, K.M.

    2006-05-10

    Spray forming is a competitive low-cost alternative to ingot metallurgy for manufacturing ferrous and non-ferrous alloy shapes. It produces materials with a reduced number of processing steps, while maintaining materials properties, with the possibility of near-net-shape manufacturing. However, there are several hurdles to large-scale commercial adoption of spray forming: 1) ensuring strip is consistently flat, 2) eliminating porosity, particularly at the deposit/substrate interface, and 3) improving material yield. Through this program, a new strip/sheet casting process, termed spray rolling, has been developed, which is an innovative manufacturing technique to produce aluminum net-shape products. Spray rolling combines the benefits of twin-roll casting and conventional spray forming, showing a promising potential to overcome the above hurdles associated with spray forming. Spray rolling requires less energy and generates less scrap than conventional processes and, consequently, enables the development of materials with lower environmental impacts in both processing and final products. Spray Rolling was developed as a collaborative project between the University of California-Davis, the Colorado School of Mines, the Idaho National Engineering and Environmental Laboratory, and an industry team. The following objectives of this project were achieved: (1) Demonstration of the feasibility of the spray rolling process at the bench-scale level and evaluation of the materials properties of spray rolled aluminum strip alloys; and (2) Demonstration of 2X scalability of the process and documentation of technical hurdles to further scale up and initiate technology transfer to industry for eventual commercialization of the process.

  1. Exposition and Synthesis of Benin Bronze Casting: Emphasis on the Olotan Casters of Benin

    Science.gov (United States)

    Ifeta, Chris Funke

    2016-01-01

    The introduction of Western education to Nigeria has brought in its wake great strides toward development. Changes in Benin dates far back to the dawn of the 20th century. This paper investigates the critical role of education in development. The paper integrates interview data collected from bronze casters in Benin. The first section of the paper…

  2. The Origin and Development of the Guild of Bronze Casters of Benin ...

    African Journals Online (AJOL)

    The Benin Kingdom is one of the forest kingdoms located in West Africa which became famous for its arts, especially its art of bronze casting. The art of bronze casting flourished under the guild system established by Oba Oguola in 1280AD. The guild of bronze casters was the most important guild that existed in the ...

  3. Applying a Qualitative Modeling Shell to Process Diagnosis: The Caster System. ONR Technical Report #16.

    Science.gov (United States)

    Thompson, Timothy F.; Clancey, William J.

    This report describes the application of a shell expert system from the medical diagnostic system, Neomycin, to Caster, a diagnostic system for malfunctions in industrial sandcasting. This system was developed to test the hypothesis that starting with a well-developed classification procedure and a relational language for stating the…

  4. A five-wheel wheelchair with an active-caster drive system.

    Science.gov (United States)

    Munakata, Yu; Tanaka, Aki; Wada, Masayoshi

    2013-06-01

    A novel wheelchair system with an active-caster drive mechanism is presented in this paper. A manual (hand propelled) wheelchair with an external single-wheel drive system forms a five-wheel configuration. The active-caster mechanism is applied to a drive system to motorize a manual wheelchair. Two electric motors which drive a wheel axis and a steering axis of a drive wheel independently are equipped on the active-caster. A coordinated control of the two motors enables the velocity vector on the steering shaft to direct in an arbitrary direction with an arbitrary magnitude. The generated velocity vector allows a wheelchair to go straight and/or rotate completely in a same way as a standard electric wheelchair. Namely 2DOF of the wheelchair can be controlled independently by a single drive wheel without any constraint, such as the orientation of the drive wheel which is well known as a non-holonomic constraint. In addition to the 2DOF mobility, the proposed system enables wheelchair users to change drive modes, a rear drive and a front drive. The drive wheel on the back side of the wheelchair is vertically actuated by a linear motor to change the height of the drive wheel that can vary load distribution and the number of wheels contacting to the ground. The five-wheel-contact makes the wheelchair to move as the normal mode in which the center of rotation is located at the midpoint of the main wheels. Depressing the drive wheel results in lost contacts of the main wheels from the ground in which the center of rotation is jumped at the midpoint of the front wheels, namely it performs as a front drive wheelchair. In this paper, kinematic models of the wheelchair and that with an active-caster drive system are analyzed and a control method by using a 2DOF joystick is derived. Based on the kinematic model, a prototype mechanism of the active-caster is designed and mounted on a manual wheelchair to realize the five-wheel wheelchair. In the experiments, the independent 2

  5. Beyond the Caster Semenya controversy: the case of the use of genetics for gender testing in sport.

    Science.gov (United States)

    Wonkam, Ambroise; Fieggen, Karen; Ramesar, Raj

    2010-12-01

    Caster Semenya won the eight-hundred-meter title in the Berlin World Athletics Championships in 2009. Few hours after, Caster was at the center of a harsh contestation on gender. The International Association of Athletics Federations started an investigation, which was not respectful of her privacy. Caster's case highlights the need for an improvement in the awareness of genetic counseling principles amongst professionals, the public and various stakeholders. We critically examine the historical steps of gender verification in the Olympics, the violation of genetic counseling principles in Caster's case and outline some reflections on the complexity of the genetics of Disorders of sex development (DSD). Variability in both genotypes and phenotypes in DSD may not allow any etiological or functional classification at this point in time that could permit uncontroversial gender verification for fairer sport participation. We strongly suggest revisiting the pertinence of gender verification, and the process whereby this is done.

  6. Twin pregnancy

    DEFF Research Database (Denmark)

    Sperling, Lene; Tabor, A

    2001-01-01

    Determination of chorionicity is one of the most important issues in the management of twin pregnancy. Modern ultrasound equipment has made it possible to accurately assess placentation already in the first trimester with the lambda sign. With regard to prenatal diagnosis, it is important to know...... for clinicians caring for twin pregnancies....

  7. Local and Global Isotropy Analysis of Mobile Robots with Three Active Caster Wheels

    OpenAIRE

    Kim, Sungbok; Lee, Sanghyup

    2008-01-01

    In this paper, we presented the local and global isotropy analysis of a fully actuated caster wheeled omnidirectional mobile robot (COMR) with the steering link offset different from the wheel radius. First, based on the kinematic model, the necessary and sufficient isotropy conditions of a COMR were derived. Second, four different sets of all possible isotropic configurations were identified, along with the expressions for the isotropic steering link

  8. Conjoined Twins

    Science.gov (United States)

    ... individuals. Eight to 12 days after conception, the embryonic layers that will split to form monozygotic twins begin to develop into specific organs and structures. It's believed that when the embryo ...

  9. Warpage minimization on wheel caster by optimizing process parameters using response surface methodology (RSM)

    Science.gov (United States)

    Safuan, N. S.; Fathullah, M.; Shayfull, Z.; Nasir, S. M.; Hazwan, M. H. M.

    2017-09-01

    In injection moulding process, it is important to keep the productivity increase constantly with least of waste produced such as warpage defect. Thus, this study is concerning on minimizing warpage defect on wheel caster part. Apart from eliminating product wastes, this project also giving out best optimization techniques using response surface methodology. This research studied on five parameters A-packing pressure, B-packing time, C-mold temperature, D-melting temperature and E-cooling time. The optimization showed that packing pressure is the most significant parameter. Warpage have been improved 42.64% from 0.6524 mm to 0.3742mm.

  10. Twin-twin transfusion syndrome.

    Science.gov (United States)

    Rossi, A C; D'addario, V

    2009-04-01

    Twin-twin transfusion syndrome (TTTS) is a condition unique to monochorionic pregnancies, although very few case reports described the syndrome in dichorionic placentas. The aetiology of TTTS relies in the presence of at least 1 arterio-venous placental anastomosis, through which unequal blood exchange from one twin (donor) to the co-twin (recipient) occurs. The diagnosis of TTTS relies on the sonographic detection of oligohydramnios in the donor's sac and polyhydramnios in the recipient's sac in the second trimester, although signs of TTTS are present since the first trimester. Treatment options for TTTS include serial amnioreduction, septostomy, selective feticide of the apparently sick twin, and selective photocoagulation of placental vessels (SLPCV). Because of the growing evidence that SLPCV is the most efficacious therapy compared to amnioreduction with/without septostomy, the authors reviewed in details the effects of SLPCV on fetal growth and circulation. The authors further explore literature with regard to the prognostic factors. Finally, because Quintero staging system is actually under debate, they discuss the most recent findings on this topic and propose a new staging system to assess severity of TTTS at presentation (Rossi staging system). New topics for future research, which would probably further clarify the natural history of TTTS, are also proposed.

  11. Intragranular twinning, detwinning, and twinning-like lattice reorientation in magnesium alloys

    International Nuclear Information System (INIS)

    Wu, Wei; Gao, Yanfei; Li, Nan; Parish, Chad M.; Liu, Wenjun; Liaw, Peter K.; An, Ke

    2016-01-01

    Deformation twinning plays a critical role on improving metals or alloys ductility, especially for hexagonal close-packed materials with low symmetry crystal structure. A rolled Mg alloy was selected as a model system to investigate the extension twinning behaviors and characteristics of parent-twin interactions by nondestructive in situ 3D synchrotron X-ray microbeam diffraction. Besides twinning-detwinning process, the “twinning-like” lattice reorientation process was captured within an individual grain inside a bulk material during the strain reversal. The distributions of parent, twin, and reorientated grains and sub-micron level strain variation across the twin boundary are revealed. A theoretical calculation of the lattice strain confirms that the internal strain distribution in parent and twinned grains correlates with the experimental setup, grain orientation of parent, twin, and surrounding grains, as well as the strain path changes. The study suggests a novel deformation mechanism within the hexagonal close-packed structure that cannot be determined from surface-based characterization methods.

  12. Optimization of flow control devices in a ten-strand billet caster tundish

    Directory of Open Access Journals (Sweden)

    Shu-guo Zheng

    2016-11-01

    Full Text Available The physical model of a ten-strand billet caster tundish was established to study the effects of various flow control devices on the melt flow. Before and after the optimization of the melt flow, the inclusion removal in the tundish was evaluated by plant trials. The physical modeling results show that when combined with a baffle, the turbulence inhibitor, instead of the impact pad, can significantly improve the melt flow. A turbulence inhibitor with a longer length of inner cavity and without an extending lip at the top of the sidewall seems to be efficient in the improvement of the melt flow. Various types and designs of baffles all influence the flow characteristics significantly. The “V” type baffles are better than the straight baffles for flow control. The “V” type baffle with four inclined holes at the sidewall away from the stopper rods is better in melt flow control than the one with one inclined hole at each sidewall. The combination of a well-designed turbulence inhibitor and an appropriate baffle shows high efficiency on improving the melt flow and an optimal proposal was presented. Plant trials indicate that, compared with the original tundish configuration in prototype, the inclusions reduce by 42% and the inclusion distribution of individual strands is more similar with the optimal one. The optimal tundish configuration effectively improves the melt flow in the ten-strand billet caster tundish.

  13. Caster Semenya and the "Question of Too": Sex Testing in Elite Women's Sport and the Issue of Advantage

    Science.gov (United States)

    Schultz, Jaime

    2011-01-01

    In 2009, the International Association of Athletics Federations (IAAF) forced Caster Semenya, the women's 800-meter champion from South Africa, to submit to "gender verification tests." It took eleven months for officials to review the results of those tests and, ultimately, permit her compete again. Sports organizations, including the IAAF and…

  14. Mathematical Model for Collision-Coalescence Among Inclusions in the Bloom Continuous Caster with M-EMS

    Science.gov (United States)

    Lei, Hong; Jiang, Jimin; Yang, Bin; Zhao, Yan; Zhang, Hongwei; Wang, Weixian; Dong, Guiwen

    2018-02-01

    Mathematical simulation is an effective tool to analyze the fluid flow and the inclusion behavior in the bloom continuous caster with mold electromagnetic stirring (M-EMS). The mathematical model is applied to the modeling of magnetic field, flow field, and inclusion field. Due to the introduction of Archimedes force, the collision mechanism and inclusion's slipping velocity should be modified in the inclusion mass and population conservation model. Numerically predicted magnetic field, flow field, and the inclusion spatial distribution conform to the experimental results in the existing literature. Lorentz force plays an important role in the fluid flow, and Archimedes force plays an important role in the inclusion distribution in the continuous caster. Due to Brownian collision, Stokes collision, Archimedes collision, and turbulent collision, the coalescence among inclusions occurs in the bloom continuous caster with M-EMS. Among the four types of collisions, turbulent collision occurs most frequently, followed by Archimedes collision and Stokes collision. The frequency of Brownian collision is several orders of magnitudes smaller and is therefore negligible. The inclusion volume concentration, number density, and characteristic radius exhibit a U-shape in the continuous caster without M-EMS. However, with M-EMS, they exhibit an inverted U-shape.

  15. Mathematical Model for Collision-Coalescence Among Inclusions in the Bloom Continuous Caster with M-EMS

    Science.gov (United States)

    Lei, Hong; Jiang, Jimin; Yang, Bin; Zhao, Yan; Zhang, Hongwei; Wang, Weixian; Dong, Guiwen

    2018-04-01

    Mathematical simulation is an effective tool to analyze the fluid flow and the inclusion behavior in the bloom continuous caster with mold electromagnetic stirring (M-EMS). The mathematical model is applied to the modeling of magnetic field, flow field, and inclusion field. Due to the introduction of Archimedes force, the collision mechanism and inclusion's slipping velocity should be modified in the inclusion mass and population conservation model. Numerically predicted magnetic field, flow field, and the inclusion spatial distribution conform to the experimental results in the existing literature. Lorentz force plays an important role in the fluid flow, and Archimedes force plays an important role in the inclusion distribution in the continuous caster. Due to Brownian collision, Stokes collision, Archimedes collision, and turbulent collision, the coalescence among inclusions occurs in the bloom continuous caster with M-EMS. Among the four types of collisions, turbulent collision occurs most frequently, followed by Archimedes collision and Stokes collision. The frequency of Brownian collision is several orders of magnitudes smaller and is therefore negligible. The inclusion volume concentration, number density, and characteristic radius exhibit a U-shape in the continuous caster without M-EMS. However, with M-EMS, they exhibit an inverted U-shape.

  16. Hot forging of roll-cast high aluminum content magnesium alloys

    Science.gov (United States)

    Kishi, Tomohiro; Watari, Hisaki; Suzuki, Mayumi; Haga, Toshio

    2017-10-01

    This paper reports on hot forging of high aluminum content magnesium alloy sheets manufactured using horizontal twin-roll casting. AZ111 and AZ131 were applied for twin-roll casting, and a hot-forging test was performed to manufacture high-strength magnesium alloy components economically. For twin-roll casting, the casting conditions of a thick sheet for hot forging were investigated. It was found that twin-roll casting of a 10mm-thick magnesium alloy sheet was possible at a roll speed of 2.5m/min. The grain size of the cast strip was 50 to 70µm. In the hot-forging test, blank material was obtained from as-cast strip. A servo press machine with a servo die cushion was used to investigate appropriate forging conditions (e.g., temperature, forging load, and back pressure) for twin-roll casts (TRCs) AZ111 and AZ131. It was determined that high aluminum content magnesium alloy sheets manufactured using twin-roll casting could be forged with a forging load of 150t and a back pressure of 3t at 420 to 430°C. Applying back pressure during hot forging effectively forged a pin-shaped product.

  17. Preparing for Twins

    Science.gov (United States)

    ... or fraternal, all twins have their individual personalities, styles, and temperament. Both identical and fraternal twins may ... you on how to cope with the special parenting challenges with twins. He also can suggest helpful ...

  18. Twin Peaks

    Science.gov (United States)

    1997-01-01

    The two hills in the distance, approximately one to two kilometers away, have been dubbed the 'Twin Peaks' and are of great interest to Pathfinder scientists as objects of future study. The white areas on the left hill, called the 'Ski Run' by scientists, may have been formed by hydrologic processes.The image was taken by the Imager for Mars Pathfinder (IMP) after its deployment on Sol 3. Mars Pathfinder was developed and managed by the Jet Propulsion Laboratory (JPL) for the National Aeronautics and Space Administration. The IMP was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

  19. The Qingdao Twin Registry

    DEFF Research Database (Denmark)

    Duan, Haiping; Ning, Feng; Zhang, Dongfeng

    2013-01-01

    In 1998, the Qingdao Twin Registry was initiated as the main part of the Chinese National Twin Registry. By 2005, a total of 10,655 twin pairs had been recruited. Since then new twin cohorts have been sampled, with one longitudinal cohort of adolescent twins selected to explore determinants...... of metabolic disorders and health behaviors during puberty and young adulthood. Adult twins have been sampled for studying heritability of multiple phenotypes associated with metabolic disorders. In addition, an elderly twin cohort has been recruited with a focus on genetic studies of aging-related phenotypes...

  20. A novel four-caster manual vehicle manoeuvring investigation: Higher loading-weights require larger turning spaces.

    Science.gov (United States)

    Abraham, Brian B; Joyce, Tom J; Davidson, Robert I; Johnson, Garth R

    2015-05-01

    Patient-hoists, goods-trolleys and other omni-directional manually operated vehicles are ubiquitous. Yet no substantive, empirically based dynamic analysis has been made of these four-caster vehicles despite manual handling concerns. A relationship between loading-weight and turning space is indicated by theoretical analysis which further shows that this effect is represented by only 11 different manoeuvres. A qualitative account of the theory is presented. These 11 manoeuvres were implemented experimentally. A total of 17 subjects selected a maximum comfortable loading-weight for the four-caster vehicle for each of the 11 manoeuvres. Vehicle displacement and handle forces were measured for different centres of zero velocity. The median loading-weight of the manoeuvre with the highest loading-weight selections was 101% greater than the mean loading-weight of the three manoeuvres with the lowest loading-weight selections. The manoeuvre with the highest loading-weight selections required a larger vehicle turning space: one dimension increased by 37% (173 mm) compared with the three lowest loading-weight selection manoeuvres and the other dimension increased by 17% (130 mm) compared with one of the lowest loading-weight selection manoeuvres. Higher loading-weights require larger turning spaces. These results can contribute to building designs which facilitate safe manual manoeuvring of four-caster vehicles. © IMechE 2015.

  1. Effect of Grain Misorientation Angle on Twinning Propagation in Ti-15Mo Alloy

    Science.gov (United States)

    Im, Y.-D.; Lee, Y.-K.; Song, K. H.

    2018-03-01

    This study was carried out to evaluate the effect of grain misorientation angle distribution on the deformation behavior and twinning of Ti-15Mo alloy. Cold rolling exhibited a significant texture with grains oriented along the {111}//normal direction, which correlate with a higher fraction of low-angle boundaries. This material showed a lower yield strength and higher elongation than those of the hot rolled material. The twinning propagation mainly occurred between neighboring grains with a low-angle relation. Consequently, the texture development was correlated with low-angle boundaries and affected by the increase in the twinning density, which increased the strain hardening rate.

  2. Pathophysiology of twin to twin transfuzion syndrome

    Directory of Open Access Journals (Sweden)

    Šulović Nenad

    2014-01-01

    Full Text Available Twin-twin transfusion syndrome (TTTTS is a pathological condition whereby a donor fetus bleeds into the circulation of a recipient fetus through the abnormal inter-twin placental anastomoses. The donor twin becomes anemic, hypovolemic, growth restricted, and as a consequence has a reduced urinary production. Since swallowing of the fluid is not impaired, the amniotic fluid volume progressively decreases. The recipient twin becomes hypervolemic. Lacking a mechanism to remove blood, the recipient twin eliminates as much fluid as possible, thus becoming hypercytemic or even hydropic in the more severe cases. The elevated urinary production from the recipient twin leads to polyhydramnios and an overdistension of the amniotic cavity, that compresses the donor and it's vascular supply against the uterine wall, further decreasing perfusion to the donor fetus. The reduction in amniotic fluid on the donor side results in a close apposition of the inter-twin membrane that fixes the donor fetus to the uterus, a condition nicknamed 'stuck twin'.

  3. Policing the boundaries of sex: a critical examination of gender verification and the Caster Semenya controversy.

    Science.gov (United States)

    Cooky, Cheryl; Dworkin, Shari L

    2013-01-01

    On August 19, 2009, Caster Semenya, South African track star, won a gold medal in the women's 800-meter event. According to media reports, on the same day, the International Association of Athletics Federations (IAAF) ordered Semenya to undergo gender verification testing. This article critically assesses the main concepts and claims that undergird international sport organizations' policies regarding "gender verification" or "sex testing." We examine the ways in which these policies operate through several highly contested assumptions, including that (a) sex exists as a binary; (b) sport is a level playing field for competitors; and (c) some intersex athletes have an unfair advantage over women who are not intersex and, as such, they should be banned from competition to ensure that sport is a level playing field. To conclude, we make three recommendations that are consistent with the attainment of sex and gender justice in sport, which include acknowledging that myriad physical advantages are accepted in sport, recognizing that sport as a level playing field is a myth, and eliminating sex testing in sport.

  4. Monochorionic twin pregnancies

    NARCIS (Netherlands)

    Hack, K.E.A.

    2008-01-01

    Following widespread application of assisted reproductive technology modalities and the increased age of motherhood, the incidence of twin gestations has increased markedly. Twins are either monozygotic or dizygotic. Dizygotic (i.e. fraternal) twins result from the fertilization of two different

  5. Interface-facilitated deformation twinning in copper within submicron Ag-Cu multilayered composites

    International Nuclear Information System (INIS)

    Wang, Jian; Beyerlein, Irene J.; Mara, Nathan A.; Bhattacharyya, Dhriti

    2011-01-01

    Highlights: → Deformation twins in Cu are observed within submicron Ag-Cu multilayers. → We propose that the Ag-Cu interface facilitated deformation twinning in Cu. → We demonstrate the proposal using atomistic simulation and dislocation theory. → Interface-driven twinning suggests the possibility of altering the roles of slip and twinning through the hetero-phase interface design. -- Rolling of Ag-Cu layered eutectic composites with bilayer thicknesses in the submicron regime (∼200-400 nm) activated deformation twinning in Cu. Using atomistic simulations and dislocation theory, we propose that the Ag-Cu interface facilitated deformation twinning in Cu by permitting the transmission of twinning partials from Ag to Cu. In this way, twins in Ag can provide an ample supply of twinning partials to Cu to support and sustain twin growth in Cu during deformation. Interface-driven twinning as revealed by this study suggests the exciting possibility of altering the roles of dislocation slip and twinning through the design of heterophase interface structure and properties.

  6. Allelopatic effect of different caster bean organs (Ricinus communis L. on reducing germination and growth of dodder (Cuscuta campestris Yuncker

    Directory of Open Access Journals (Sweden)

    S.M Seyyedi

    2016-05-01

    Full Text Available Introduction Dodder (Cascuta campestris Yuncker is an annual parasitic plant from the Convolvulaceae family (Mishra et al., 2007. It wraps around many adjacent dicot and a few monocot plants, penetrates in their vascular tissue and exploits photosynthates, nutrients and water (Lanini & Kogan, 2005. Consequently, the growth, vigor and production of the host plant will be severely reduced (Nadler-Hasasr & Rubin, 2003. Dodder is not able to complete its cycle, if it is not attached to a host. Therefore, it is entirely dependent on its host for supplying water, assimilates and minerals (Mishra et al., 2007. Considering the nature of dodder habit, it is rarely possible to completely control dodder by using different chemical herbicides (Lanini & Kogan, 2005. In addition, because of increasing the environmental concerns caused by applying synthetic herbicides, there is considerable attention to alternative strategies for weeds management (Batish et al., 2002; Bowmik & Inderjit, 2003. In recent years, allelopathic plants, an alternative strategy for weed management, have received massive attention (Narwal, 2010; Jamil et al., 2009. Due to the importance of dodder as a parasitic weed, this research was conducted with the purpose of studying the allelopathic effects of aqueous extracts and decay durations of caster bean (Ricinus communis L. organs on germination and emergence of dodder. Materials and methods The current study was conducted based on three separate experiments using a completely randomized design (CRD with factorial arrangement with three replications. The first experiment was conducted in petri dishes and consisted of caster bean organs at four levels (root, stem, leaf and total plant without inflorescence and their aqueous extract concentrations at 11 levels (0, 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10%. The second experiment was conducted in pots and factors were caster bean organs at 4 levels (root, stem, leaf and total plant without

  7. Three-Dimensional Flow Modeling of a Self-wiping Corotating Twin-Screw Extruder. Part I : The Transporting Section

    NARCIS (Netherlands)

    Goffart, D.; Wal, D.J. van der; Klomp, E.M.; Hoogstraten, H.W.; Janssen, L.P.B.M.; Breysse, L.; Trolez, Y.

    1996-01-01

    A three-dimensional modeling of the transporting elements in a self-wiping corotating twin-screw extruder has been carried out by using the finite element package Sepran. This simulation uses the 3D geometry of the channel rolled over the twin-screw, which consists of the intermeshing and normal

  8. Mechanical Properties and Microstructural Evolution of Variable-Plane-Rolled Mg-3Al-1Zn Alloy

    Science.gov (United States)

    Zhu, Rong; Bian, Cunjian; Wu, Yanjun

    2017-04-01

    The microstructural evolution and mechanical properties of AZ31 magnesium alloy produced by variable-plane rolling (VPR) were investigated. Two types of weak textures were formed: basal texture in odd pass and double-peak basal texture in even pass. Dynamic recrystallization (DRX) was observed during the VPR treatment, and the nucleation of grains during DRX was dependent on the coalescence of subgrains. Three types of twins were observed in the VPR treatment: {10-12} extension twins, {10-13} contraction twins and {10-11}-{10-12} double twins. The {10-11}-{10-12} double twinning is the underlying mechanism in the formation of the double-peak texture. Tensile testing revealed improved strength without loss of ductility. The Hall-Petch relationship can be used to describe the strengths in any even pass with the same texture. The significant strengthening is ascribed to the refined grain, twin boundaries, texture hardening, and high dislocation density.

  9. Rolling Shutter Motion Deblurring

    KAUST Repository

    Su, Shuochen

    2015-06-07

    Although motion blur and rolling shutter deformations are closely coupled artifacts in images taken with CMOS image sensors, the two phenomena have so far mostly been treated separately, with deblurring algorithms being unable to handle rolling shutter wobble, and rolling shutter algorithms being incapable of dealing with motion blur. We propose an approach that delivers sharp and undis torted output given a single rolling shutter motion blurred image. The key to achieving this is a global modeling of the camera motion trajectory, which enables each scanline of the image to be deblurred with the corresponding motion segment. We show the results of the proposed framework through experiments on synthetic and real data.

  10. Regularities of recrystallization in rolled Zr single crystals

    International Nuclear Information System (INIS)

    Isaenkova, M; Perlovich, Yu; Fesenko, V; Krymskaya, O; Krapivka, N; Thu, S S

    2015-01-01

    Experiments by rolled single crystals give a more visible conception of the operating mechanisms of plastic deformation and the following recrystallization, than experiments by polycrystals. Studies by usage of X-ray diffraction methods were conducted by Zr single crystals. It was revealed, that regions of the α-Zr matrix, deformed mainly by twinning, are characterized with decreased tendency to recrystallization. Orientations of recrystallized α-Zr grains correspond to “slopes” of maxima in the rolling texture, where the level of crystalline lattice distortion is maximal and the number of recrystallization nuclei is most of all. (paper)

  11. Twin-twin Transfusion Syndrome with a Single Ectopic Kidney in a Twin Donor. Case Presentation

    OpenAIRE

    Gerardo Rogelio Robaina Castellanos; Solangel de la Caridad Riesgo Rodríguez; Esther María Tristá Ricardo

    2016-01-01

    Twin-twin Transfusion Syndrome presents more frequently in diamniotic monochromic twins. In advanced stages and without prenatal intervention, is associated to high rates of peri natal mortality and neurological sequel in the survivors. It is presented a case of a pair of twins with severe depression at birth in which it was diagnosed a Twin-twin Transfusion Syndrome, later confirmed with the presence of anemia in the donor twin and polycythemia in the receptor twin. Both twins had an unfavou...

  12. Perinatal hepatic infarction in twin-twin transfusion.

    LENUS (Irish Health Repository)

    O'Sullivan, M J

    2012-02-03

    We report a case of a twin pregnancy which was complicated by a twin-twin transfusion in which the recipient twin was noted to have an intra-abdominal echogenic mass. This twin died at two days of age of hepatic infarction. The donor twin was healthy at birth, at thirty weeks\\' gestation, and did not have any subsequent problems. Fetal intra-abdominal echogenicity may be a marker of hepatic infarction.

  13. The Danish Twin Register

    DEFF Research Database (Denmark)

    Kyvik, K O; Christensen, Kaare; Skytthe, A

    1996-01-01

    BACKGROUND: Population based twin registers represent a valuable tool for genetic epidemiological research, since twin studies aim at separating the effect of genes and environment for complex traits. The Danish Twin Register's history, size, ascertainment and completeness of data, as well as dat......-1952 og 1983-1993 are being ascertained at the moment. The register is available for research given certain conditions are fulfilled. CONCLUSION: This register will in a few years be the most comprehensive twin register in the world. It is a very valuable Danish research resource....

  14. Conjoined (Siamese) Twins in Zambia

    African Journals Online (AJOL)

    year-old Zambian multiparous mother gave birth to a set of twins with two heads ... (symmetric or mirror image) but one twin attached with an incomplete foetus is known as hetropagtrs. (asymmetrical). Thoracopagus twins (joined at the chest).

  15. Cosmology with rolling tachyon

    Indian Academy of Sciences (India)

    Email: sami@iucaa.ernet.in. Abstract. We examine the possibility of rolling tachyon to play the dual role of inflaton at early epochs and dark matter at late times. We argue that enough inflation can be generated with the rolling tachyon either by invoking the large number of branes or brane world assisted inflation. However ...

  16. Light airplane crash tests at three roll angles

    Science.gov (United States)

    Castle, C. B.; Alfaro-Bou, E.

    1979-01-01

    Three similar twin engine general aviation airplanes were crash tested at the Langley impact dynamics research facility at 27 m/sec and at nominal roll angles of 0 deg, -15 deg, and -30 deg. Other flight parameters were held constant. The test facility, instrumentation, test specimens, and test method are briefly described. Structural damage and accelerometer data for each of the three impact conditions are presented and discussed.

  17. The Danish Twin Registry

    DEFF Research Database (Denmark)

    Skytthe, Axel; Ohm Kyvik, Kirsten; Vilstrup Holm, Niels

    2011-01-01

    Introduction: The Danish Twin Registry is a unique source for studies of genetic, familial and environmental factors on life events, health conditions and diseases. Content: More than 85,000 twin pairs born 1870-2008 in Denmark. Validity and coverage: Four main ascertainment methods have been emp...

  18. Rotational Twin Paradox

    Science.gov (United States)

    Smarandache, Florentin

    2012-10-01

    Two twins settle on a massive spherical planet at a train station S. Let's consider that each twin has an accompanying clock, and the two clocks are synchronized. One twin T1 remains in the train station, while the other twin T2 travels at a uniform high speed with the train around the planet (on the big circle of the planet) until he gets back to the same train station S. Assume the planet is not rotating. Since the planet is massive, we can consider that on a very small part on its surface the train rail road is linear, so the train is in a linear uniform motion. The larger is the planet's radius the more the rail road approaches a linear trajectory. Because the GPS clocks are alleged to be built on the Theory of Relativity, one can consider the twin T2 train's circular trajectory alike the satellite's orbit. In addition, the gravitation is the same for the reference frames of T1 and T2. Each twin sees the other twin as traveling, therefore each twin finds the other one has aged slower than him. Thus herein we have a relativistic symmetry. When T2 returns to train station S, he finds out that he is younger than T1 (therefore asymmetry). Thus, one gets a contradiction between symmetry and asymmetry.

  19. Rolling at small scales

    DEFF Research Database (Denmark)

    Nielsen, Kim L.; Niordson, Christian F.; Hutchinson, John W.

    2016-01-01

    the power input to the process. The contact traction is also affected, particularly for sheet thicknesses on the order of 10 μm and below. The influences of the length parameter and the friction coefficient are emphasized, and the results are presented for multiple sheet reductions and roll sizes....... dealing with the transient response period is employed. This allows for a comprehensive parameter study. Coulomb friction, including a stick-slip condition, is used as a first approximation. It is found that length scale effects increase both the forces applied to the roll, the roll torque, and thus...

  20. Rolled-Up Metamaterials

    Directory of Open Access Journals (Sweden)

    Stephan Schwaiger

    2012-01-01

    Full Text Available In this paper we review metamaterials fabricated from self-rolling strained metal-semiconductor layer systems. These systems relax their strain upon release from the substrate by rolling up into microtubes with a cross-section similar to a rolled-up carpet. We show that the walls of these microtubes represent three-dimensional optical metamaterials which so far could be used, for example, for the realization of broadband hyperlenses, fishnet metamaterials, or optically active three-dimensional metamaterials utilizing the unique possibility to stack optically active semiconductor heterostructures and metallic nanostructures. Furthermore, we discuss THz metamaterials based on arrays of rolled-up metal semiconductor microtubes and helices.

  1. Neonatal status of twins

    Directory of Open Access Journals (Sweden)

    Božinović Dragica

    2012-01-01

    Full Text Available Multiple pregnancy is a pregnancy where more than one fetus develops simultaneously in the womb, as a result of the ovulation and fertilization of more than one egg. It is relatively rare in humans and represents the rest of the phylogenetic stages. The most common are twins and they indicate the development of two fetuses in the womb. The frequency of twin pregnancies is about 1%. Multiple pregnancies belong to a group of high-risk pregnancies because of the many complications that occur during the pregnancy: higher number of premature deliveries, bleeding, early neonatal complications and higher perinatal morbidity and mortality. Such pregnancies and infants require greater supervision and monitoring. The aim of this study was to determine the percentage of baby twins born at the maternity ward of the General Hospital in Prokuplje and their morbidity and mortality. Data on the total number of deliveries, number of twins, parity and maternal age, gestational age, body weight of twins, method of delivery, Apgar score and perinatal mortality were collected and statistically analyzed by means of retrospective analysis of operative birth and neonatal protocol for 6 years (2005 of 2010. Out of 4527 mothers who gave birth 43 were pairs of twins, or 0.95% of women gave birth to twins. These babies are more likely born by Caesarean section, but delivered with slightly lower birth weight.

  2. Roll Damping By Rudder Control

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, H.H.; Blanke, M.

    1994-01-01

    Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves.......Roll damping and simultaneous course steering by rudder control is a challenging problem where a key factor is roll damping performance in waves....

  3. SUSY Meets Her Twin

    CERN Document Server

    Katz, Andrey; Pokorski, Stefan; Redigolo, Diego; Ziegler, Robert

    2017-01-31

    We investigate the general structure of mirror symmetry breaking in the Twin Higgs scenario. We show, using the IR effective theory, that a significant gain in fine tuning can be achieved if the symmetry is broken hardly. We emphasize that weakly coupled UV completions can naturally accommodate this scenario. We analyze SUSY UV completions and present a simple Twin SUSY model with a tuning of around 10% and colored superpartners as heavy as 2 TeV. The collider signatures of general Twin SUSY models are discussed with a focus on the extended Higgs sectors.

  4. Internal strain and texture evolution during deformation twinning in magnesium

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.W. [MS-H805, BLDG 622, TA-53, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)]. E-mail: dbrown@lanl.gov; Agnew, S.R. [Department of Materials Science and Engineering, University of Virginia, Charlottesville, VA 22904 (United States); Bourke, M.A.M. [MS-H805, BLDG 622, TA-53, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Holden, T.M. [Northern Stress Technologies, Deep River, Ont., K0J 1P0 (Canada); Vogel, S.C. [MS-H805, BLDG 622, TA-53, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Tome, C.N. [MS-H805, BLDG 622, TA-53, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2005-06-15

    The development of a twinned microstructure in hexagonal close-packed rolled magnesium compressed in the in-plane direction has been monitored in situ with neutron diffraction. The continuous conversion of the parent to daughter microstructure is tracked through the variation of diffraction peak intensities corresponding to each. Approximately 80% of the parent microstructure twins by 8% compression. Elastic lattice strain measurements indicate that the stress in the newly formed twins (daughters) is relaxed relative to the stress field in the surrounding matrix. However, since the daughters are in a plastically 'hard' deformation orientation, they quickly accumulate elastic strain as surrounding grains deform plastically. Polycrystal modeling of the deformation process provides insight about the crystallographic deformation mechanism involved.

  5. On the deformation twinning of Mg AZ31B

    DEFF Research Database (Denmark)

    Abdolvand, Hamidreza; Majkut, Marta; Oddershede, Jette

    2015-01-01

    extension twinning as a deformation mode due to the lack of easy-slip systems. In this work, experiments were devised to study extension twinning in a polycrystalline Mg alloy AZ31B with a strong basal rolling texture by tensile deformation parallel to the plate normal. Three-dimensional synchrotron X......Crystals with a hexagonal close-packed (HCP) structure are inherently anisotropic, and have a limited number of independent slip systems, which leads to strong deformation textures and reduced formability in polycrystalline products. Tension along the c-axis of the crystal ideally activates...... and grain volumes are used to construct various 3D microstructures and model them with a Crystal Plasticity Finite Element (CPFE) code. It is observed that the average grain-resolved stress did not always select the highest ranked Schmid factor twin variant. In fact, the contribution of lower ranked...

  6. Jejunal atresia in twins

    NARCIS (Netherlands)

    Moorman-Voestermans, C. G.; Heij, H. A.; Vos, A.

    1990-01-01

    In the past 2 1/2 years a sudden increase in the frequency of jejunal atresia in discordant, nonidentical twins was observed. Reported are the details of 11 cases and some reflections on possible pathogenetic mechanisms involved

  7. The 16th International Twin Congress: Highlights from Madrid/Twin Research: Twin Study of Partner Aggression; ABO Incompatibility in Dizygotic Twins; Growth Discordance in a Monoamniotic Twin Pair; Quick Note on Twin Implantation/In the Media: Long-Lost Twins Found; NASA Twin Experiment; Twin Brothers and the Las Vegas Attack; Retired Twin Airline Pilots; Twin Film Clips.

    Science.gov (United States)

    Segal, Nancy L

    2018-02-01

    Highlights from the 16th International Twin Congress, held in Madrid, Spain from November 16-18, 2017, are presented. The Twin Congress, formerly held every three years, now takes place biennially with a single-day meeting organized during the off years. This meeting is the largest gathering of scientific twin researchers, medical personnel, and representatives of multiple birth organizations in the world. This overview is followed by reviews of recent twin research and commentary concerning partner aggression, ABO incompatibility in dizygotic twins, growth discordance in a monoamniotic twin pair and twin implantation. The article closes with summaries of timely topics in the media, namely a father's finding of his long-lost twin children, early results from the NASA twin experiment, twin brothers at the center of the October 2017 Las Vegas attack, retired twin airline pilots, and clips from recent films with twin-based themes.

  8. Dogs discriminate identical twins.

    Directory of Open Access Journals (Sweden)

    Ludvík Pinc

    Full Text Available Earlier studies have shown variation among experimental attempts to establish whether human monozygotic twins that are genetically identical also have identical individual scents. In none of the cases were the dogs able to distinguish all the individual scents of monozygotic twins living in the same environment if the scents were presented to them separately. Ten specially trained police German Shepherd dogs of three Czech Republic Police Regional Headquarters were used for scent identification in our study. The dogs were supposed to match scents of two monozygotic pairs (5 and 7 years old and two dizygotic twin pairs (8 and 13 years old. Scents were collected on cotton squares stored in glass jars. Dog handlers were blind to the experiment details. In each trial (line-up, one scent was used as a starting scent and the dog was then sent to determine if any of the 7 presented glass jars contained a matching scent. Scents of children of similar ages were used as distractors. In the matching procedure, the dogs matched correctly the scent of one twin with the other, as well as two scents collected from every single identical and non-identical twin to prove their efficacy and likewise, the presence of the matching twin scent in any given glass jar. All dogs in all trials distinguished correctly the scents of identical as well as non-identical twins. All dogs similarly matched positively two scents collected from the same individuals. Our findings indicated that specially trained German Shepherd dogs are able to distinguish individual scents of identical twins despite the fact that they live in the same environment, eat the same food and even if the scents are not presented to them simultaneously.

  9. Dogs Discriminate Identical Twins

    Science.gov (United States)

    Pinc, Ludvík; Bartoš, Luděk; Reslová, Alice; Kotrba, Radim

    2011-01-01

    Earlier studies have shown variation among experimental attempts to establish whether human monozygotic twins that are genetically identical also have identical individual scents. In none of the cases were the dogs able to distinguish all the individual scents of monozygotic twins living in the same environment if the scents were presented to them separately. Ten specially trained police German Shepherd dogs of three Czech Republic Police Regional Headquarters were used for scent identification in our study. The dogs were supposed to match scents of two monozygotic pairs (5 and 7 years old) and two dizygotic twin pairs (8 and 13 years old). Scents were collected on cotton squares stored in glass jars. Dog handlers were blind to the experiment details. In each trial (line-up), one scent was used as a starting scent and the dog was then sent to determine if any of the 7 presented glass jars contained a matching scent. Scents of children of similar ages were used as distractors. In the matching procedure, the dogs matched correctly the scent of one twin with the other, as well as two scents collected from every single identical and non-identical twin to prove their efficacy and likewise, the presence of the matching twin scent in any given glass jar. All dogs in all trials distinguished correctly the scents of identical as well as non-identical twins. All dogs similarly matched positively two scents collected from the same individuals. Our findings indicated that specially trained German Shepherd dogs are able to distinguish individual scents of identical twins despite the fact that they live in the same environment, eat the same food and even if the scents are not presented to them simultaneously. PMID:21698282

  10. Ship Roll Damping Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2012-01-01

    The technical feasibility of roll motion control devices has been amply demonstrated for over 100 years. Performance, however, can still fall short of expectations because of difficulties associated with control system designs, which have proven to be far from trivial due to fundamental performance...... limitations and large variations of the spectral characteristics of wave-induced roll motion. This tutorial paper presents an account of the development of various ship roll motion control systems together with the challenges associated with their design. It discusses the assessment of performance...... and the applicability of different mathematical models, and it surveys the control methods that have been implemented and validated with full scale experiments. The paper also presents an outlook on what are believed to be potential areas of research within this topic....

  11. Stochastic disks that roll

    Science.gov (United States)

    Holmes-Cerfon, Miranda

    2016-11-01

    We study a model of rolling particles subject to stochastic fluctuations, which may be relevant in systems of nano- or microscale particles where rolling is an approximation for strong static friction. We consider the simplest possible nontrivial system: a linear polymer of three disks constrained to remain in contact and immersed in an equilibrium heat bath so the internal angle of the polymer changes due to stochastic fluctuations. We compare two cases: one where the disks can slide relative to each other and the other where they are constrained to roll, like gears. Starting from the Langevin equations with arbitrary linear velocity constraints, we use formal homogenization theory to derive the overdamped equations that describe the process in configuration space only. The resulting dynamics have the formal structure of a Brownian motion on a Riemannian or sub-Riemannian manifold, depending on if the velocity constraints are holonomic or nonholonomic. We use this to compute the trimer's equilibrium distribution with and without the rolling constraints. Surprisingly, the two distributions are different. We suggest two possible interpretations of this result: either (i) dry friction (or other dissipative, nonequilibrium forces) changes basic thermodynamic quantities like the free energy of a system, a statement that could be tested experimentally, or (ii) as a lesson in modeling rolling or friction more generally as a velocity constraint when stochastic fluctuations are present. In the latter case, we speculate there could be a "roughness" entropy whose inclusion as an effective force could compensate the constraint and preserve classical Boltzmann statistics. Regardless of the interpretation, our calculation shows the word "rolling" must be used with care when stochastic fluctuations are present.

  12. Offensive Rolling in Sambo

    Directory of Open Access Journals (Sweden)

    Stephen Koepfer

    2012-07-01

    Full Text Available In recent years the Soviet born martial art of sambo has become increasingly well known in martial art circles. This is largely due to the success of sambo fighters in various mixed martial art venues. Offered here is a brief description of sambo’s development as well as a delineation of one of sambo’s hallmark strategies: offensive rolling. Examples of proper forward rolling and three related offensive techniques are presented. This paper provides a brief introduction to sambo’s history and one of its key tactical philosophies.

  13. METHOD OF ROLLING URANIUM

    Science.gov (United States)

    Smith, C.S.

    1959-08-01

    A method is described for rolling uranium metal at relatively low temperatures and under non-oxidizing conditions. The method involves the steps of heating the uranium to 200 deg C in an oil bath, withdrawing the uranium and permitting the oil to drain so that only a thin protective coating remains and rolling the oil coated uranium at a temperature of 200 deg C to give about a 15% reduction in thickness at each pass. The operation may be repeated to accomplish about a 90% reduction without edge cracking, checking or any appreciable increase in brittleness.

  14. Ship Roll Motion Control

    DEFF Research Database (Denmark)

    Perez, Tristan; Blanke, Mogens

    2010-01-01

    The technical feasibility of roll motion control devices has been amply demonstrated for over 100 years. Performance, however, can still fall short of expectations because of deciencies in control system designs, which have proven to be far from trivial due to fundamental performance limitations....... This tutorial paper presents an account of the development of various ship roll motion control systems and the challenges associated with their design. The paper discusses how to assess performance, the applicability of dierent models, and control methods that have been applied in the past....

  15. Texture comparison between cold rolled and cryogenically rolled pure copper

    OpenAIRE

    Lapeire, Linsey; Sidor, J; Lombardia, EM; Verbeken, Kim; De Graeve, Iris; Terryn, H; Kestens, Leo

    2015-01-01

    Nowadays, there is a considerable scientific interest in bulk ultrafine grained materials, due to their potential for superior mechanical properties. One of the possible formation methods of nano-grained materials is cryogenic rolling. The influence of rolling at cryogenic temperatures has been investigated. Significant differences in the textures and the microstructures can be observed between the cryogenically rolled copper and conventionally cold rolled copper, reduced to the same thickness.

  16. Cosmology with rolling tachyon

    Indian Academy of Sciences (India)

    765-770. Cosmology with rolling tachyon. M sAMIa, PRAVABATI CHINGANGBAMb and TABIsH QUREsHIb. aInter-University Centre for Astronomy and Astrophysics, Post Bag 4, Ganeshkhind,. Pune 411 007, India. bDepartment of Physics, Jamia Millia Islamia, New Delhi 110 025, India. *On leave from Jamia Millia Islamia, ...

  17. Hypoalbuminemia in Donors with Twin-Twin Transfusion Syndrome

    NARCIS (Netherlands)

    Verbeek, L.; Middeldorp, J. M.; Hulzebos, C. V.; Oepkes, D.; Walther, F. J.; Lopriore, E.

    2013-01-01

    Objective: To estimate the differences in albumin levels between donors and recipients with twin-twin transfusion syndrome (TTTS). Methods: We performed a matched case-control study including twin pairs with TTTS treated conservatively (conservative group) or with fetoscopic laser surgery (laser

  18. Dialysis for twins

    DEFF Research Database (Denmark)

    Gramkow, Ann-Maria; Aarup, Michael; Andersen, L. L. T.

    2014-01-01

    A 32-year-old woman with known stage-4 chronic kidney disease due to lupus nephritis presented with twin pregnancy after in vitro fertilization at a gestational age of 24 weeks + 3 days because of imminent preterm labour. Repeated ultrasound evaluations confirmed intrauterine growth restriction...... in both twins and polyhydramnios as the cause of imminent preterm labour. After initiation of haemodialysis treatment, ultrasound evaluation showed a significant decrease in amniotic fluids, and also reduction in blood urea nitrogen and in clinical complaints could be observed. At a gestational age of 28...... weeks + 4 days, delivery was performed by Caesarean section. This case study shows that effective treatment of elevated uraemic toxins significantly reduced the morbidity risks of the twins....

  19. Rolling motion in moving droplets

    Indian Academy of Sciences (India)

    2015-02-19

    Feb 19, 2015 ... Drops moving on a substrate under the action of gravity display both rolling and sliding motions. The two limits of a thin sheet-like drop in sliding motion on a surface, and a spherical drop in roll, have been extensively studied. We are interested in intermediate shapes. We quantify the contribution of rolling ...

  20. Rolling motion in moving droplets

    Indian Academy of Sciences (India)

    Abstract. Drops moving on a substrate under the action of gravity display both rolling and sliding motions. The two limits of a thin sheet-like drop in sliding motion on a surface, and a spherical drop in roll, have been extensively studied. We are interested in intermediate shapes. We quantify the contribution of rolling motion ...

  1. Imaging of conjoined twins

    Energy Technology Data Exchange (ETDEWEB)

    McHugh, Kieran [Great Ormond Street Hospital for Children, Department of Radiology, London (United Kingdom); Kiely, Edward M.; Spitz, Lewis [Great Ormond Street Hospital for Children, Department of Surgery, London (United Kingdom)

    2006-09-15

    The incidence of conjoined twins is estimated to be around 1 in 250,000 live births. There is a distinct female predominance. In this paper the imaging of conjoined twins both antenatally and postnatally is reviewed, in particular taking into consideration recent advances with multidetector CT. Accurate counselling of parents regarding the likely outcome of the pregnancy and the likelihood of successful separation is dependent on good prenatal imaging with ultrasound and MRI. Planning of postnatal surgical separation is aided by accurate preoperative imaging which, depending on the conjoined area, will encompass many imaging modalities, but often relies heavily on CT scanning. (orig.)

  2. Reflections on twin relationships: twins reared apart and twins of opposite gender.

    Science.gov (United States)

    Segal, Nancy L

    2012-12-01

    The complexities of twin relationships posed by separate rearing and by opposite sex are considered. Unusual cases may highlight unique social-interactional processes and outcomes occurring in these pairs. Research reviews include recent twin studies on second language acquisition, political behavior, and multiple birth rates. Items of more general interest include twin 'cousins' reared apart, indistinguishable monozygotic quadruplets, a genetic testing dilemma, and a performance about separated twins.

  3. Mitral valve regurgitation in twins

    DEFF Research Database (Denmark)

    Bakkestrøm, Rine; Larsen, Lisbeth Aagaard; Møller, Jacob Eifer

    2016-01-01

    BACKGROUND: Smaller observational studies have suggested familial clustering of mitral regurgitation (MR). Using a large twin cohort, the aims were to assess MR concordance rates and assess mortality in MR twins and unaffected cotwins. METHODS: Through the Danish Twin Registry, twins with an Inte.......57, 95% CI 1.86-3.54). Overall there was no increased mortality risk for unaffected cotwins to MR cases compared with matched controls (HR 1.02, 95% CI 0.90-1.17) except for first year of life (HR 1.92, 95% CI 1.10-3.36) and for monozygotic twins older than 65 years (HR 1.49, 95% CI 1...

  4. Anaesthesia for conjoined twins

    African Journals Online (AJOL)

    draw~ver patient system consisting of a paediatric. "Ambu" bag and "Paedivalven drawing oxygen-en- riched air through a halothane vaporiser. Oxygen was supplied from an electric oxygen concentrator which can give 2 litres of 95% oxygen per minute. This apparatus has been described I. Mter 3 minutes the Sa02 of Twin ...

  5. Twin Hub Network (poster)

    NARCIS (Netherlands)

    Kreutzberger, E.D.; Konings, J.W.

    2014-01-01

    Twin hub network, a European Interreg IVB project, aims at making intermodal rail transport within, to and from North West Europe more competitive, in particular between seaports and inland terminals. Improving rail competitiveness enables to shift freight flows from road to rail, providing a more

  6. Sleep Terrors in Twins

    Directory of Open Access Journals (Sweden)

    J Gordon Millichap

    2008-12-01

    Full Text Available In an attempt to clarify the genetic and environmental causes of sleep terrors in childhood, reasearchers in Canada followed 390 pairs of monozygotic and dizygotic twins by assessing the frequency of sleep terrors at 18 and 30 months of age using a questionnaire administered to the biological mothers.

  7. Sleep Terrors in Twins

    OpenAIRE

    J Gordon Millichap

    2008-01-01

    In an attempt to clarify the genetic and environmental causes of sleep terrors in childhood, reasearchers in Canada followed 390 pairs of monozygotic and dizygotic twins by assessing the frequency of sleep terrors at 18 and 30 months of age using a questionnaire administered to the biological mothers.

  8. Walk and roll robot

    Science.gov (United States)

    Wilson, Andrew (Inventor); Punnoose, Andrew (Inventor); Strausser, Katherine (Inventor); Parikh, Neil (Inventor)

    2011-01-01

    A mobile robotic unit features a main body, a plurality of legs for supporting the main body on and moving the main body in forward and reverse directions about a base surface, and a drive assembly. According to an exemplary embodiment each leg includes a respective pivotal hip joint, a pivotal knee joint, and a wheeled foot adapted to roll along the base surface. Also according to an exemplary embodiments the drive assembly includes a motor operatively associated with the hip and knee joints and the wheeled foot for independently driving pivotal movement of the hip joint and the knee joint and rolling motion of the wheeled foot. The hip joint may include a ball-and-socket-type joint interconnecting top portion of the leg to the main body, such that the hip joint is adapted to pivot said leg in a direction transverse to a forward-and-reverse direction.

  9. Sygeplejerskens rolle i neurorehabilitering

    DEFF Research Database (Denmark)

    Hansen, Tina Skov; Lorentzen, Vibeke

    2014-01-01

    Artiklen beskriver en undersøgelse foretaget i 2008 omhandlende sygeplejerskers rolle i tværfaglige team i neurorehabilitering på hospitalet. Fund fra denne undersøgelse relateres til nyere undersøgelser og til de udfordringer, der er forbundet med at organisere neurorehabilitering i både hospitals...... for neurorehabilitering. I denne undersøgelse blev fokus at belyse, hvordan teamsamarbejdet har indvirkning på sygeplejerskers rolle i de tværfaglige team på en dansk neurorehabiliteringsafdeling. Metode: Interview med tre forskellige personalegrupper i de tværfaglige team: Sygeplejersker, social- og sundhedsassistenter...... hjerneskade. Søgeord: Interviewundersøgelse, neurorehabilitering, roller, tværfagligt samarbejde....

  10. Twin-twin transfusion syndrome - diagnosis and prognosis

    Directory of Open Access Journals (Sweden)

    Hajrić-Egić Amira

    2003-01-01

    Full Text Available Twin-twin transfusion syndrome is a serious complication of monozygotic, monochorionic, diamniotic twins resulting from transplacental vascular communications. In this syndrome blood is thought to be shunted from one twin - donor,who develops anaemia,growth retardation and oligoamnios, to the other twin - recipient,who becomes plethoric,macrosomic and develops polyhydroamnios. The incidence of twin-twin transfusion syndrome ranges from 5-15% of all twin pregnancies. If this condition develops in the second trimester, it is usually associated with spontaneous abortion and death of one or both fetuses before viability. Developing the syndrome in the third trimester has better perinatal outcome. Mortality rates ranging from 56%-100%, depending on gestational age and severity of the syndrome. The ultrasound criterias for diagnosis, in this study,were the presence of twins of the same sex with discordant growth, with oligohydroamnios in one twin sac and polyhydroamnios in the other one, one placenta and thin membrane between twins. The present study shows clinical course of 14 cases and value of Doppler ultrasound to analyze the usefulness of umbilical artery blood flow velocimetry for predicting the risk of twin-twin transfusion syndrome. 14 twin pregnancies with twin-twin transfusion syndrome were diagnosed during the last four years period and prospectivelly followed. 9 cases were diagnosed before the completion od 28 weeks of gestation.The mean gestational age was 21,6_+4,2 weeks at diagnosis and 23,2+_3,6 weeks at delivery. 5 cases were diagnosed after 28 weeks of gestation. The mean gestational age in this group was 29,6+_2,1 weeks at diagnosis and 33+_3,3 weeks at delivery. The survival rate in this study was 29%(8/28.9 cases ended in spontaneous abortion between 18th and 27th weeks of pregnancy (table 1 and 5 in premature labor (table 2.There were 7 intrauterine death (5 at admission and 2 few days after admission and 13 neonatal deaths

  11. Shear Roll Mill Reactivation

    Science.gov (United States)

    2012-09-13

    pneumatically operated paste dumper and belt conveyor system , the loss in weight feeder system , the hydraulically operated shear roll mill, the pellet...out feed belt conveyor , and the pack out system comprised of the metal detector, scale, and pack out empty and full drum roller conveyors . Page | 4...process equipment sprinkler protection systems , and the 5 psig steam supply serving the building heating and make-up air systems . It also included

  12. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  13. Twin Higgs WIMP dark matter

    Science.gov (United States)

    García García, Isabel; Lasenby, Robert; March-Russell, John

    2015-09-01

    Dark matter (DM) without a matter asymmetry is studied in the context of twin Higgs (TH) theories in which the LHC naturalness problem is addressed. These possess a twin sector related to the Standard Model (SM) by a (broken) Z2 symmetry, and interacting with the SM via a specific Higgs portal. We focus on the minimal realization of the TH mechanism, the fraternal twin Higgs, with only a single generation of twin quarks and leptons, and the S U (3 )'×S U (2 )' gauge group. We show that a variety of natural twin-WIMP DM candidates are present (directly linked to the weak scale by naturalness), the simplest and most attractive being the τ' lepton with a mass mτ'>mHiggs/2 , although spin-1 W'± DM and multicomponent DM are also possible (twin baryons are strongly disfavored by tuning). We consider in detail the dynamics of the possibly (meta)stable glueballs in the twin sector, the nature of the twin QCD phase transition, and possible new contributions to the number of relativistic degrees of freedom, Δ Neff . Direct detection signals are below current bounds but accessible in near-future experiments. Indirect detection phenomenology is rich and requires detailed studies of twin hadronization and fragmentation to twin glueballs and quarkonia and their subsequent decay to SM, and possible light twin sector states.

  14. Hydropic Placenta as a First Manifestation of Twin-Twin Transfusion in a Monochorionic Diamniotic Twin Pregnancy

    NARCIS (Netherlands)

    de Laat, Monique W. M.; Manten, Gwendoline T. R.; Nikkels, Peter G. J.; Stoutenbeek, Philip

    2009-01-01

    Monochorionic twin pregnancies are at a 10% to 1.5% risk of developing twin-twin transfusion syndrome (TTTS).(1) Monitoring such pregnancies is aimed at evaluating the fetal condition by measuring the amount of amniotic fluid, Doppler parameters, and fetal growth. Twin-twin transfusion syndrome may

  15. Reared-Apart Chinese Twins: Chance Discovery/Twin-Based Research: Twin Study of Media Use; Twin Relations Over the Life Span; Breast-Feeding Opposite-Sex Twins/Print and Online Media: Twins in Fashion; Second Twin Pair Born to Tennis Star; Twin Primes; Twin Pandas.

    Science.gov (United States)

    Segal, Nancy L

    2017-04-01

    A January 2017 reunion of 10-year-old reared-apart Chinese twin girls was captured live on ABC's morning talk show Good Morning America, and rebroadcast on their evening news program Nightline. The twins' similarities and differences, and their participation in ongoing research will be described. This story is followed by reviews of twin research concerning genetic and environmental influences on media use, twin relations across the lifespan and the breast-feeding of opposite-sex twins. Popular interest items include twins in fashion, the second twin pair born to an internationally renowned tennis star, twin primes and twin pandas.

  16. Numeric simulations of a liquid metal model of a bloom caster under the effect of rotary electromagnetic stirring

    Science.gov (United States)

    Barna, M.; Javurek, M.; Willers, B.; Eckert, S.; Reiter, J.

    2016-07-01

    At the voestalpine Stahl Donawitz GmbH the continuous casting of round steel blooms is commonly supported by electromagnetically induced stirring of the liquid steel flow. A number of beneficial effects are attributed to electromagnetic stirring in the mould region (M-EMS), e.g. the enhanced transition from columnar to equiaxed solidification, the homogenization of the liquid steel flow or the reduction of surface and subsurface defects. Although the positive effects of M-EMS can be seen on the blooms (e.g. in etchings), the link between electromagnetic stirring of the steel melt and the quality of the solidified bloom is not sufficiently understood. Theoretical considerations are often limited to general cases and their results are therefore not directly applicable to real continuous casting geometries. On the other hand, plant measurements can only be performed to a limited extent due to the harsh conditions and other restrictions (e.g. safety regulations). In this work an alternative approach is used to investigate the steel flow in a round bloom caster under the influence of M-EMS. In a 1:3 scale Perspex model of a round bloom strand, measurements of the flow under the influence of a rotating magnetic field can be conducted. These measurements provide a validation benchmark for the numeric simulations. A numeric model of the before mentioned 1:3 scale model is implemented, encompassing the strand, the submerged entry nozzle as well as the M-EMS device. In the modelling approach, the bidirectional coupling between liquid steel flow and the electromagnetic field/forces has to be considered because otherwise the resulting tangential velocities will be overestimated. With the validated modelling approach, simulations of real casting machines can then be conducted, stirring parameter influences can be shown and conclusions for the real casting process can be drawn.

  17. DEFECTS SIMULATION OF ROLLING STRIP

    OpenAIRE

    Rudolf Mišičko; Tibor Kvačkaj; Martin Vlado; Lucia Gulová; Miloslav Lupták; Jana Bidulská

    2009-01-01

    The defects in the continuous casting slabs can be developed or kept down in principle by rolling technology, especially depend to sort, size and distribution of primary defects, as well as used of rolling parameters. Scope of the article is on observation behavior artificial surface and undersurface defects (scores) without filler (surface defects) and filling by oxides and casting powder (subsurface defects). First phase of hot rolling process have been done by software simulation DEFORM 3D...

  18. Intact twin tubal pregnancy

    Directory of Open Access Journals (Sweden)

    Nina Hodžić

    2010-08-01

    Full Text Available A case of a unilateral eight-week twin ectopic pregnancy diagnosed with transvaginal sonography is presented here. This ectopic pregnancy was found in the right Fallopian tube of a 35-year old woman. After the surgical procedure conducted by the method of transversal laparotomy, we removed the right Fallopian tube with two gestational sacs. So far only a hundred of such cases of ectopic twinpregnancy have been described worldwide.

  19. Hvordan gør musikken i Twin Peaks?

    Directory of Open Access Journals (Sweden)

    Ansa Lønstrup

    1992-08-01

    Full Text Available Det er almindelig erkendt, at musikken spiller en afgørende rolle for den totale oplevelse af film og TV. Men det glemmes ofte igen, især i fortolk- ninger, der focuserer på handlingen og ser bort fra musikken og måske også den visuelle formidling. Tendensen til at "glemme" musikken i fortolkningen skyldes især, at den er svær at beskrive og svær at analysere. Ansa Lønstrups analyse af musikkens rolle i TV-serien Twin Peaks er en eksemplarisk gennem- gang af hvorledes musikken skaber betydning. Den er samtidig et bidrag til forståelsen af netop denne serie, der bl.a. udmærker sig ved, at den næppe kan begribes uden at musikken bliver en del af oplevelse og tolk- ning.

  20. Roll back malaria update.

    Science.gov (United States)

    1999-10-01

    This article presents the activities under WHO's Roll Back Malaria (RBM) program in Asia, particularly in Nepal, Indonesia, India, Bangladesh, Sri Lanka and the Philippines. In India, the RBM program will start in 5 districts with a major malaria problem. A national committee has been formed by researchers, which will be able to provide operational and strategic support and research expertise in relation to malaria. In Bangladesh, the RBM program was initiated in the sparsely populated hill tract areas of Banderban and Chittagong where access to health care is very poor. At the district level, effective partnerships with private practitioners, politicians, community leaders, school teachers, the press and district Ministry of Health officials are operating to plan for rolling back malaria. In Myanmar, Cambodia, Lao People's Democratic Republic, Yunnan province of China, Vietnam, and Thailand, the focus of the RBM program was to move health care closer to the malaria-infected communities. WHO¿s Global Health Leadership Fellowship Programme, supported by the UN Foundation and Rockefeller Foundation, enables potential leaders to experience the work of UN agencies and contribute to the work of the organization for 2 years. Three out of four persons appointed to the RBM program received prestigious awards: Dr. Paola Marchesini of Brazil; Dr. Tieman Diarra of Mali; and Dr. Bob Taylor of the UK.

  1. Texture comparison between cold rolled and cryogenically rolled pure copper

    NARCIS (Netherlands)

    Lapeire, L.; Sidor, J.; Martinez Lombardia, E.; Verbeken, K.; De Graeve, I.; Terryn, H.A.; Kestens, L.A.I.

    2015-01-01

    Nowadays, there is a considerable scientific interest in bulk ultrafine grained materials, due to their potential for superior mechanical properties. One of the possible formation methods of nano-grained materials is cryogenic rolling. The influence of rolling at cryogenic temperatures has been

  2. Acardiac twin pregnancies part III : Model simulations

    NARCIS (Netherlands)

    van Gemert, Martin J C; Ross, Michael G.; Nikkels, Peter G J; Wijngaard, Jeroen P H M van den

    2016-01-01

    Background: Acardiac monochorionic twins lack cardiac function but grow by passive perfusion of the pump twin's deoxygenated arterial blood through placental arterioarterial (AA) and venovenous (VV) anastomoses and by hypoxia-mediated neovascularization. Pump twins therefore must continuously

  3. Contemporary management of complicated monochorionic twins.

    Science.gov (United States)

    Moise, Karen Y; Kugler, Lisa; Jones, Tyra

    2012-01-01

    Monochorionic twins are at increased risk for unique complications including twin-twin transfusion syndrome (TTTS), selective intrauterine growth restriction (sIUGR), and twin-reversed arterial perfusion (TRAP) sequence. Twin-twin transfusion syndrome is treated with laser photocoagulation whereas selective reduction is an option in previable sIUGR or TRAP sequence. The nurse is integral in the management, education, care and support of women with complicated pregnancies. © 2012 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses.

  4. Effects of hot-rolling reduction on microstructure, texture and magnetic properties of high silicon steel produced by strip casting

    Science.gov (United States)

    Hou, D. Y.; Xu, H. J.; Jiao, H. T.; Zhao, C. W.; Xiong, W.; Yang, J. P.; Qiu, W. Z.; Xu, Y. B.

    2017-01-01

    Non-oriented Fe-7.1wt.% Si as-cast strips were produced by twin-roll strip casting process. Then the as-cast strips were hot rolled with different reductions, followed by warm rolling and final annealing. The microstructure, texture evolution and magnetic properties were investigated in detail. The texture of hot rolled sheets with 40% reduction showed strongest {001} texture, whereas the dominated texture was turned into {110} and {110}as the reduction was increased to 56% and 68%. After warm rolling and annealing, the average grain size was decreased firstly and then increased with an increase in hot rolling reduction. In the case of 40% hot rolling reduction, the recrystallization texture was dominated by strong γ (//ND) texture. With an increase in hot rolling reduction, the γ texture was gradually weakened while α (//RD) texture was enhanced. In addition, relatively stronger {100} texture was presented in the sheet of 68% hot rolling reduction. The highest B50 value attained was 1.66 T and the lowest P10/400 was 24.26 W/kg at a reduction of 56%.

  5. Rudder roll stabilization for ships

    NARCIS (Netherlands)

    van Amerongen, J.; van der Klugt, P.G.M.; van Nauta lemke, H.R.

    1990-01-01

    This paper describes the design of an autopilot for rudder roll stabilization for ships. This autopilot uses the rudder not only for course keeping but also for reduction of the roll. The system has a series of properties which make the controller design far from straightforward: the process has

  6. Twinning across the Developing World.

    Directory of Open Access Journals (Sweden)

    Jeroen Smits

    Full Text Available BACKGROUND: Until now, little was known about the variation in incidence of twin births across developing countries, because national representative data was lacking. This study provides the first comprehensive overview of national twinning rates across the developing world on the basis of reliable survey data. METHODS: Data on incidence of twinning was extracted from birth histories of women aged 15-49 interviewed in 150 Demographic and Health Surveys, held between 1987 and 2010 in 75 low and middle income countries. During the interview, information on all live births experienced by the women was recorded, including whether it was a singleton or multiple birth. Information was available for 2.47 million births experienced by 1.38 million women in a period of ten years before the interview. Twinning incidence was measured as the number of twin births per thousand births. Data for China were computed on the basis of published figures from the 1990 census. Both natural and age-standardized twinning rates are presented. RESULTS/CONCLUSIONS: The very low natural twinning rates of 6-9 per thousand births previously observed in some East Asian countries turn out to be the dominant pattern in the whole South and South-East Asian region. Very high twinning rates of above 18 per thousand are not restricted to Nigeria (until now seen as the world's twinning champion but found in most Central-African countries. Twinning rates in Latin America turn out to be as low as those in Asia. Changes over time are small and not in a specific direction. SIGNIFICANCE: We provide the most complete and comparable overview of twinning rates across the developing world currently possible.

  7. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  8. Twin Legacies: Victor and Vincent McKusick/Twin Studies: Twinning Rates I; Twinning Rates II; MZ Twin Discordance for Russell-Silver Syndrome; Twins' Language Skills/Headlines: Babies Born to Identical Twin Couples; Identity Exchange; Death of Princess Ashraf (Twin); Yahoo CEO Delivers Identical Twins.

    Science.gov (United States)

    Segal, Nancy L

    2016-04-01

    The lives of the illustrious monozygotic (MZ) twins, Victor A. and Vincent L. McKusick, are described. Victor earned the distinction as the 'Father of Medical Genetics', while Vincent was a legendary Chief Justice of the Maine Supreme Court. This dual biographical account is followed by two timely reports of twinning rates, a study of MZ twin discordance for Russell-Silver Syndrome (RSS) and a study of twins' language skills. Twin stories in the news include babies born to identical twin couples, a case of switched identity, the death of Princess Ashraf (Twin) and a new mother of twins who is also Yahoo's CEO.

  9. Twin classics: research that always inspires/Twin studies: elder twin relationships; Superfecundated twinning in chimpanzees; Conjoined twinning and embryo transfer; Reduced frequency of in vitro multiples/Professional and human interest: first identical twin renal transplant; Identical triplet wedding; Spanakos twins: boxers; Twins in space; Political twins.

    Science.gov (United States)

    Segal, Nancy L

    2015-08-01

    Ten classic works in twin research are described. These volumes are rich in data, interpretation, and impact, and contain life history material that adds depth and dimension to the quantitative findings. Next, research on social relationships in older twins, superfecundated twinning in chimpanzees; effects of embryo transfer on conjoined twinning and the reduced frequency of in vitro multiples is reviewed. Finally, there has been considerable public interest surrounding the first identical twin renal transplant, an identical triplet wedding; identical twin boxers, a twin living in space, and a politically active twin pair.

  10. Twin Peaks - 3D

    Science.gov (United States)

    1997-01-01

    The two hills in the distance, approximately one to two kilometers away, have been dubbed the 'Twin Peaks' and are of great interest to Pathfinder scientists as objects of future study. 3D glasses are necessary to identify surface detail. The white areas on the left hill, called the 'Ski Run' by scientists, may have been formed by hydrologic processes.The IMP is a stereo imaging system with color capability provided by 24 selectable filters -- twelve filters per 'eye.Click below to see the left and right views individually. [figure removed for brevity, see original site] Left [figure removed for brevity, see original site] Right

  11. Holographic twin Higgs model.

    Science.gov (United States)

    Geller, Michael; Telem, Ofri

    2015-05-15

    We present the first realization of a "twin Higgs" model as a holographic composite Higgs model. Uniquely among composite Higgs models, the Higgs potential is protected by a new standard model (SM) singlet elementary "mirror" sector at the sigma model scale f and not by the composite states at m_{KK}, naturally allowing for m_{KK} beyond the LHC reach. As a result, naturalness in our model cannot be constrained by the LHC, but may be probed by precision Higgs measurements at future lepton colliders, and by direct searches for Kaluza-Klein excitations at a 100 TeV collider.

  12. Oliver Sacks: Our Correspondence About Twins/Twin Research: Vanishing Twins Syndrome; Discordant Sex in MZ Twins; Pregnancy Outcomes in IVF and ICSI Conceived Twins/Print and Media: Superfetated Twins; Twins Discordant for Smoking; Twins in Fashion; Yale University Twin Hockey Players; Conjoined Twin-Visiting Professor.

    Science.gov (United States)

    Segal, Nancy L

    2017-08-01

    The late neurologist and author, Oliver Sacks, published an insightful 1986 review of Marjorie Wallace's book, The Silent Twins, in the New York Times. Taking exception to his assertion about Sir Francis Galton, I wrote a letter to the Times' editor. The letter was unpublished, but it brought a wonderful response from Sacks himself that is reproduced and examined. Next, brief reviews of twin research concerning the vanishing twin syndrome (VTS), discordant sex in a monozygotic (MZ) twin pair, and multiple pregnancy outcomes from assisted reproductive technology (ART) are presented. This section is followed by popular coverage of superfetated twins, smoking-discordant co-twins, twins in fashion, Yale University twin hockey players, and a visiting professor who was a conjoined twin.

  13. Hypertensive disorders in twin pregnancy

    NARCIS (Netherlands)

    J.G. Santema (Job); E. Koppelaar (Elin); H.C.S. Wallenburg (Henk)

    1995-01-01

    textabstractObjective: To compare the incidence and severity of pregnancy-induced hypertensive disorders in twin pregnancy and in singleton gestation. Study design: Case-control study in the setting of a University Hospital. Each pregnancy of a consecutive series of 187 twin pregnancies attending

  14. Microstructure and Mechanical Properties Evolution of the Al, C-Containing CoCrFeNiMn-Type High-Entropy Alloy during Cold Rolling.

    Science.gov (United States)

    Klimova, Margarita; Stepanov, Nikita; Shaysultanov, Dmitry; Chernichenko, Ruslan; Yurchenko, Nikita; Sanin, Vladimir; Zherebtsov, Sergey

    2017-12-29

    The effect of cold rolling on the microstructure and mechanical properties of an Al- and C-containing CoCrFeNiMn-type high-entropy alloy was reported. The alloy with a chemical composition (at %) of (20-23) Co, Cr, Fe, and Ni; 8.82 Mn; 3.37 Al; and 0.69 C was produced by self-propagating high-temperature synthesis with subsequent induction. In the initial as-cast condition the alloy had an face centered cubic single-phase coarse-grained structure. Microstructure evolution was mostly associated with either planar dislocation glide at relatively low deformation during rolling (up to 20%) or deformation twinning and shear banding at higher strain. After 80% reduction, a heavily deformed twinned/subgrained structure was observed. A comparison with the equiatomic CoCrFeNiMn alloy revealed higher dislocation density at all stages of cold rolling and later onset of deformation twinning that was attributed to a stacking fault energy increase in the program alloy; this assumption was confirmed by calculations. In the initial as-cast condition the alloy had low yield strength of 210 MPa with yet very high uniform elongation of 74%. After 80% rolling, yield strength approached 1310 MPa while uniform elongation decreased to 1.3%. Substructure strengthening was found to be dominated at low rolling reductions (<40%), while grain (twin) boundary strengthening prevailed at higher strains.

  15. Socioeconomic position and twins' health

    DEFF Research Database (Denmark)

    Osler, Merete; McGue, Matt; Christensen, Kaare

    2007-01-01

    of middle-aged Danish twins was conducted in 1998-99. The study population included 1266 like-sex twin pairs [52.5% monozygotic (MZ) and 47.6% dizygotic (DZ)]. Data were obtained on childhood and adult social class and on height, BMI, grip strength, depression symptoms, self-rated health, cognitive function...... cognitive test scores. Among DZ female twins discordant on adult social class, the higher social class female twin was more physically active and had a higher cognitive test score. There were no significant health disparities or behavioural differences between the members of MZ twin pairs discordant......BACKGROUND: The association between socioeconomic circumstances and health in adulthood could come about through processes that may be divided into factors experienced early in life and those experienced in later adulthood. In order to disentangle the influences on health of the early genetic...

  16. Twin methodology in epigenetic studies

    DEFF Research Database (Denmark)

    Tan, Qihua; Christiansen, Lene; von Bornemann Hjelmborg, Jacob

    2015-01-01

    of diseases to molecular phenotypes in functional genomics especially in epigenetics, a thriving field of research that concerns the environmental regulation of gene expression through DNA methylation, histone modification, microRNA and long non-coding RNA expression, etc. The application of the twin method...... to molecular phenotypes offers new opportunities to study the genetic (nature) and environmental (nurture) contributions to epigenetic regulation of gene activity during developmental, ageing and disease processes. Besides the classical twin model, the case co-twin design using identical twins discordant...... for a trait or disease is becoming a popular and powerful design for epigenome-wide association study in linking environmental exposure to differential epigenetic regulation and to disease status while controlling for individual genetic make-up. It can be expected that novel uses of twin methods in epigenetic...

  17. A Computational Discriminability Analysis on Twin Fingerprints

    Science.gov (United States)

    Liu, Yu; Srihari, Sargur N.

    Sharing similar genetic traits makes the investigation of twins an important study in forensics and biometrics. Fingerprints are one of the most commonly found types of forensic evidence. The similarity between twins’ prints is critical establish to the reliability of fingerprint identification. We present a quantitative analysis of the discriminability of twin fingerprints on a new data set (227 pairs of identical twins and fraternal twins) recently collected from a twin population using both level 1 and level 2 features. Although the patterns of minutiae among twins are more similar than in the general population, the similarity of fingerprints of twins is significantly different from that between genuine prints of the same finger. Twins fingerprints are discriminable with a 1.5%~1.7% higher EER than non-twins. And identical twins can be distinguished by examine fingerprint with a slightly higher error rate than fraternal twins.

  18. Cold rolled texture and microstructure in types 304 and 316L austenitic stainless steels

    International Nuclear Information System (INIS)

    Wasnik, D.N.; Samajdar, I.; Gopalakrishnan, I.K.; Yakhmi, J.V.; Kain, V.

    2003-01-01

    Two grades of austenitic stainless steel (ASS), types 304 (UNS S 30400) and 316L (UNS S 31603), were cold rolled to different reductions by unidirectional and by cross-rolling. The steels had reasonable difference in stacking fault energy (estimated respectively as 15 and 61 mJ/m 2 in types 304 and 316L) and also in starting (or pre-deformation) crystallographic texture-being relatively weak and reasonably strong in types 304 and 316L respectively. The cold rolling increased texturing in type 304, but not in type 316L ASS. The more significant effect of cold rolled texture development was in the relative increase of Brass ({011} ) against Copper ({112} ) and S ({231} ) orientations. In type 304 the increase in Brass was significant, while in type 316L the increase in Copper and S was stronger. This effect could be captured by Taylor type deformation texture simulations considering stronger twinning contributions in type 304 - for example the respective 'best-fits' (in terms of matching the changes in the volume fractions of Brass against Copper and S) were obtained by full constraint Taylor model with 1:100 and 1:10 slip:twin activities in types 304 and 316L ASS respectively. Microstructural developments during cold rolling were generalized as strain induced martensite formation and developments of dislocation substructure. The former, as estimated by vibrating sample magnetometer (VSM), increased with cold reduction, being significantly more in type 304 and was also noticeably stronger in both grades under cross-rolling. The most significant aspect of substructural developments was the formation of strain localizations. These were observed as dense dislocation walls (DDWs), micro-bands (MBs) and twin lamellar structures (TLS). The TLS contribution gained significance at higher reductions and during cross-rolling, especially in type 304. Large misorientation development and the accompanying grain splittings were always associated with such strain localizations

  19. Mesomorphic Lamella Rolling of Au in Vacuum

    Directory of Open Access Journals (Sweden)

    Chen Shuei-Yuan

    2009-01-01

    Full Text Available Abstract Lamellar nanocondensates in partial epitaxy with larger-sized multiply twinned particles (MTPs or alternatively in the form of multiple-walled tubes (MWTs having nothing to do with MTP were produced by the very energetic pulse laser ablation of Au target in vacuum under specified power density and pulses. Transmission electron microscopic observations revealed (111-motif diffraction and low-angle scattering. They correspond to layer interspacing (0.241–0.192 nm and the nearest neighbor distance (ca. 0.74–0.55 nm of atom clusters within the layer, respectively, for the lamella, which shows interspacing contraction with decreasing particle size under the influence of surface stress and rolls up upon electron irradiation. The uncapped MWT has nearly concentric amorphous layers interspaced by 0.458–0.335 nm depending on dislocation distribution and becomes spherical onions for surface-area reduction upon electron dosage. Analogous to graphene-derived tubular materials, the lamella-derived MWT of Au could have pentagon–hexagon pair at its zig-zag junction and useful optoelectronic properties worthy of exploration.

  20. Therapeutic modalities of twin to twin transfusion syndrome

    Directory of Open Access Journals (Sweden)

    Šulović N.

    2015-01-01

    Full Text Available Twin to twin transfusion syndrome (TTTTS accounts for approximately 10% of monochorionic twin pregnancies and, if left untreated, is associated with high morbidity and mortality rate. A net transfusion of blood flow from one fetus (donor twin to the other (recipient twin via placental vascular anastomoses has been supposed as the major etiology of TTTTS. The donor twin becomes hypovolemic and oliguria, oligohydramnios, and a variable degree of growth restriction develop, whereas the recipient twin manifests polyuria, polyhydramnios, and hydrops in response to hypervolemia. TTTTS can be treated by either serial amniocentesis or selective fetoscopic laser coagulation of the communicating vessels. The rationale for removal of large volumes of amniotic fluid is to prevent preterm delivery secondary to polyhydramnios and to improve fetal circulation by reducing pressure on the chorionic plate. On the other hand, the goal of laser therapy is to occlude vascular anastomoses, thereby interrupting intertwin blood exchange. Although laser treatment is associated with increased survival rate and reduced neurologic complications, compared with amnioreduction, it requires highly specialized centers, whereas serial amniocentesis has the advantage of being performed worldwide. Therefore, the optimal treatment for pregnancies complicated with TTTTS is still controversial.

  1. Brachistochrone for a rolling cylinder

    Science.gov (United States)

    Legeza, V. P.

    2010-02-01

    The motion of a heavy homogeneous cylinder is considered as a no-slip rolling along the desired curve. We obtain a functional in the form of the total time of the cylinder rolling and solve the corresponding variational problem of minimizing this functional. We obtain an algebraic equation for the directional line of steepest descent, brachistochrone, in parametric form. We use the equation of motion of the cylinder with constraint reaction to determine the conditions of implementation of its pure rolling without separation and slip with respect to the brachistochrone.

  2. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  3. Estimating twin concordance for bivariate competing risks twin data

    DEFF Research Database (Denmark)

    Scheike, Thomas; Holst, Klaus K.; Hjelmborg, Jacob B.

    2014-01-01

    For twin time-to-event data, we consider different concordance probabilities, such as the casewise concordance that are routinely computed as a measure of the lifetime dependence/correlation for specific diseases. The concordance probability here is the probability that both twins have experienced...... over time, and covariates may be further influential on the marginal risk and dependence structure. We establish the estimators large sample properties and suggest various tests, for example, for inferring familial influence. The method is demonstrated and motivated by specific twin data on cancer...

  4. Manufacturing Demonstration Facility: Roll-to-Roll Processing

    Energy Technology Data Exchange (ETDEWEB)

    Datskos, Panos G [ORNL; Joshi, Pooran C [ORNL; List III, Frederick Alyious [ORNL; Duty, Chad E [ORNL; Armstrong, Beth L [ORNL; Ivanov, Ilia N [ORNL; Jacobs, Christopher B [ORNL; Graham, David E [ORNL; Moon, Ji Won [ORNL

    2015-08-01

    This Manufacturing Demonstration Facility (MDF)e roll-to-roll processing effort described in this report provided an excellent opportunity to investigate a number of advanced manufacturing approaches to achieve a path for low cost devices and sensors. Critical to this effort is the ability to deposit thin films at low temperatures using nanomaterials derived from nanofermentation. The overarching goal of this project was to develop roll-to-roll manufacturing processes of thin film deposition on low-cost flexible substrates for electronics and sensor applications. This project utilized ORNL s unique Pulse Thermal Processing (PTP) technologies coupled with non-vacuum low temperature deposition techniques, ORNL s clean room facility, slot dye coating, drop casting, spin coating, screen printing and several other equipment including a Dimatix ink jet printer and a large-scale Kyocera ink jet printer. The roll-to-roll processing project had three main tasks: 1) develop and demonstrate zinc-Zn based opto-electronic sensors using low cost nanoparticulate structures manufactured in a related MDF Project using nanofermentation techniques, 2) evaluate the use of silver based conductive inks developed by project partner NovaCentrix for electronic device fabrication, and 3) demonstrate a suite of low cost printed sensors developed using non-vacuum deposition techniques which involved the integration of metal and semiconductor layers to establish a diverse sensor platform technology.

  5. Roll-to-roll production of organic solar cells

    Science.gov (United States)

    Uhrich, C.; Weiß, A.; Pfeiffer, M.

    2017-08-01

    We report on high efficient multi-junction small-molecule organic p-i-n solar cells with an efficiency of up to 13.2% efficiency with an active area of 1.1 cm² from our labs. Furthermore, we discuss in detail the photon loss mechanisms of triple stacked solar cells of 12.5% efficiency by means of IPCE measurements in combination with an optical model. Additionally, we report about the latest findings from our fully integrated roll-to-roll vacuum production process of smallmolecule organic p-i-n tandem solar cells. Modules from Heliatek's roll-to-roll production show efficiencies of 7.7% on the active area of 4629cm2 with a fill factor of 66%. Modules from production were analyzed via IPCE-measurement showing a good agreement with the optical calculation mentioned above. This shows that organic layer sequences developed, tested, and analyzed on a lab tool were successfully transferred to a roll to roll vacuum machine.

  6. Rolling Process Modeling Report: Finite-Element Prediction of Roll Separating Force and Rolling Defects

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-04-23

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate-type fuel for the U.S. high-performance research reactors. This work supports the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll separating forces and rolling defects. Simulations were performed using a finite-element model developed using the commercial code LS-Dyna. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel have been conducted following two different schedules. Model predictions of the roll-separation force and roll-pack thicknesses at different stages of the rolling process were compared with experimental measurements. This report discusses various attributes of the rolled coupons revealed by the model (e.g., dog-boning and thickness non-uniformity).

  7. Twins and Kindergarten Separation: Divergent Beliefs of Principals, Teachers, Parents, and Twins

    Science.gov (United States)

    Gordon, Lynn Melby

    2015-01-01

    Should principals enforce mandatory separation of twins in kindergarten? Do school separation beliefs of principals differ from those of teachers, parents of twins, and twins themselves? This survey questioned 131 elementary principals, 54 kindergarten teachers, 201 parents of twins, and 112 twins. A majority of principals (71%) believed that…

  8. The nature of pseudo-twinning modes on the basis of a twin classification scheme

    International Nuclear Information System (INIS)

    Singh, Jung B.; Sundararaman, M.; Krishnan, M.

    2011-01-01

    Pseudo-twins can form in ordered structures under high stress conditions. These twins are defined by lattice sites that are at twin positions but are incorrectly occupied by different species of atoms. The present note discusses if it is possible to further classify pseudo-twins into different modes based on the nature of associated twinning elements.

  9. Successful separation of Xipho-Omphalopagus twins

    Directory of Open Access Journals (Sweden)

    Oak S

    2007-01-01

    Full Text Available Xipho-omphalopagus twins are conjoined twins sharing some part of gastrointestinal system and lower sternum. These types of twins have best chances of survival if successfully separated. We report a case of successfully separated Xipho-omphalopagus twins, highlighting the importance of proper planning and team effort in such separations.

  10. Monochorionic twin pregnancies: a systematic approach to ...

    African Journals Online (AJOL)

    Complications unique to these pregnancies include Twin-To-Twin Transfusion Syndrome (TTTS), Twin Polycythaemia Anaemia Sequence (TAPS), Selective Intrauterine Growth Restriction (sIUGR) and death of the co-twin. Adhering to a systematic and objective approach of management, can lead to early recognition and ...

  11. Systematics of constant roll inflation

    Science.gov (United States)

    Anguelova, Lilia; Suranyi, Peter; Wijewardhana, L. C. R.

    2018-02-01

    We study constant roll inflation systematically. This is a regime, in which the slow roll approximation can be violated. It has long been thought that this approximation is necessary for agreement with observations. However, recently it was understood that there can be inflationary models with a constant, and not necessarily small, rate of roll that are both stable and compatible with the observational constraint ns ≈ 1. We investigate systematically the condition for such a constant-roll regime. In the process, we find a whole new class of inflationary models, in addition to the known solutions. We show that the new models are stable under scalar perturbations. Finally, we find a part of their parameter space, in which they produce a nearly scale-invariant scalar power spectrum, as needed for observational viability.

  12. Effect of inclusion geometry and matrix properties on rolling contact fatigue of steel

    International Nuclear Information System (INIS)

    Tyfour, R. W.

    2000-01-01

    The work presented in this paper is aimed at studying the effect of inclusion geometry and matrix property on rolling contact fatigue of steel. Rolling contact has been stimulated in laboratory using a twin-disc machine and an on-line crack detection system. It has been shown that soft inclusions, although normally considered harmless, can be good sites for crack initiation and suitable paths for crack propagation. Enough evidence has been given to show that if inclusions can be maintained spherical, they may not affect rolling contact fatigue life. The mechanical properties of the matrix play an important role in helping or hindering the deformation of soft inclusions. Strong matrix around the inclusion makes it less likely for spherical shaped inclusions to transform to stringers, and as a result, preserves the geometry of inclusion. However, soft matrix enables deforming the inclusion and raises the stress concentration at the inclusion edges. (author). 25 refs., 7 figs. 2 tabs

  13. Fivefold twinned boron carbide nanowires.

    Science.gov (United States)

    Fu, Xin; Jiang, Jun; Liu, Chao; Yuan, Jun

    2009-09-09

    Chemical composition and crystal structure of fivefold twinned boron carbide nanowires have been determined by electron energy-loss spectroscopy and electron diffraction. The fivefold cyclic twinning relationship is confirmed by systematic axial rotation electron diffraction. Detailed chemical analysis reveals a carbon-rich boron carbide phase. Such boron carbide nanowires are potentially interesting because of their intrinsic hardness and high temperature thermoelectric property. Together with other boron-rich compounds, they may form a set of multiply twinned nanowire systems where the misfit strain could be continuously tuned to influence their mechanical properties.

  14. Advanced methods in twin studies.

    Science.gov (United States)

    Kaprio, Jaakko; Silventoinen, Karri

    2011-01-01

    While twin studies have been used to estimate the heritability of different traits and disorders since the beginning of the twentieth century, statistical developments over the past 20 years and more extensive and systematic data collection have greatly expanded the scope of twin studies. This chapter reviews selected possibilities of twin study designs to address specific hypotheses regarding the role of both genetic and environmental factors in the development of traits and diseases. In addition to modelling latent genetic influences, current models permit inclusion of information on specific genetic variants, measured environmental factors and their interactive effects. Examples from studies of anthropometric traits are used to illustrate such approaches.

  15. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  16. Rolling Resistance Measurement and Model Development

    DEFF Research Database (Denmark)

    Andersen, Lasse Grinderslev; Larsen, Jesper; Fraser, Elsje Sophia

    2015-01-01

    There is an increased focus worldwide on understanding and modeling rolling resistance because reducing the rolling resistance by just a few percent will lead to substantial energy savings. This paper reviews the state of the art of rolling resistance research, focusing on measuring techniques......, surface and texture modeling, contact models, tire models, and macro-modeling of rolling resistance...

  17. Body roll in swimming: a review.

    Science.gov (United States)

    Psycharakis, Stelios G; Sanders, Ross H

    2010-02-01

    In this article, we present a critical review of the swimming literature on body roll, for the purposes of summarizing and highlighting existing knowledge, identifying the gaps and limitations, and stimulating further research. The main research findings can be summarized as follows: swimmers roll their shoulders significantly more than their hips; swimmers increase hip roll but maintain shoulder roll when fatigued; faster swimmers roll their shoulders less than slower swimmers during a 200-m swim; roll asymmetries, temporal differences in shoulder roll and hip roll, and shoulder roll side dominance exist in front crawl swimming, but there is no evidence to suggest that they affect swimming performance; and buoyancy contributes strongly to generating body roll in front crawl swimming. Based on and stimulated by current knowledge, future research should focus on the following areas: calculation of body roll for female swimmers and for backstroke swimming; differences in body roll between breathing and non-breathing cycles; causes of body roll asymmetries and their relation to motor laterality; body roll analysis across a wide range of velocities and swimming distances; exploration of the association between body roll and the magnitude and direction of propulsive/resistive forces developed during the stroke cycle; and the influence of kicking actions on the generation of body roll.

  18. Twin-to-twin transfusion syndrome : from placental anastomoses to long-term outcome

    NARCIS (Netherlands)

    Lopriore, Enrico

    2006-01-01

    Twin-to-twin transfusion syndrome (TTTS) is a severe complication of monochorionic twin pregnancies associated with high perinatal mortality and morbidity rates. Placental vascular anastomoses, almost invariably present in monochorionic placentas, are the essential anatomical substrate for the

  19. Infertility, infertility treatment and twinning

    DEFF Research Database (Denmark)

    Zhu, Jin Liang; Basso, Olga; Obel, Carsten

    2007-01-01

    BACKGROUND: We have previously observed that an increasing time to pregnancy (TTP) is associated with a reduced frequency of twin deliveries in couples not receiving infertility treatment. By using updated information, we assessed the frequencies of dizygotic (DZ) and monozygotic (MZ) twin...... deliveries as a function of infertility (TTP > 12 months), as well as infertility treatment. METHODS: From the Danish National Birth Cohort (1997-2003), we identified 51 730 fertile couples with TTP 12 months and 5163 infertile couples who conceived after treatment. Information on zygosity, available...... for part of the cohort (1997-2000), was based on standardized questions on the similarities between the twins at the age of 3-5 years. RESULTS: Compared with fertile couples, the frequency of DZ twin deliveries was lower for infertile couples conceiving naturally (odds ratio 0.4, 95% confidence interval 0...

  20. Video analysis of rolling cylinders

    Science.gov (United States)

    Phommarach, S.; Wattanakasiwich, P.; Johnston, I.

    2012-03-01

    In this work, we studied the rolling motion of solid and hollow cylinders down an inclined plane at different angles. The motions were captured on video at 300 frames s - 1, and the videos were analyzed frame by frame using video analysis software. Data from the real motion were compared with the theory of rolling down an inclined plane without slipping. From the experiment, the acceleration does not depend on the cylinder mass as indicated from the theory. For the wood-steel surface, we found that the coefficient of static friction was equal to 0.131 and the critical angle for the solid cylinder was 21.45°. The critical angle for the hollow cylinder depends on the inner and outer radius of the cylinder. Motion paths of a point on the hollow cylinder at small and large angles were shown to elucidate the pure rolling condition. Finally, we demonstrated that total mechanical energy was conserved during the pure rolling motion. This confirms that work done by the friction force is zero. We will use these results to design an interactive lecture demonstration on rolling without slipping.

  1. Sunset over Twin Peaks

    Science.gov (United States)

    1997-01-01

    This image was taken by the Imager for Mars Pathfinder (IMP) about one minute after sunset on Mars on Sol 21. The prominent hills dubbed 'Twin Peaks' form a dark silhouette at the horizon, while the setting sun casts a pink glow over the darkening sky. The image was taken as part of a twilight study which indicates how the brightness of the sky fades with time after sunset. Scientists found that the sky stays bright for up to two hours after sunset, indicating that Martian dust extends very high into the atmosphere.Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is an operating division of the California Institute of Technology (Caltech). The Imager for Mars Pathfinder (IMP) was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

  2. Spina bifida occulta and monozygotic twins.

    Science.gov (United States)

    Spacca, Barbara; Buxton, Neil

    2008-10-01

    Central nervous system maldevelopment can have different presentations in twins. We report on a case of different presentations of spina bifida occulta in monozygotic twins. The first twin presented at birth with a lipomyelomeningocele; a tethered cord was diagnosed in the second twin at 2 years of age. Neural tube defects (NTDs) are a group of common congenital malformations of the brain and spine generated during neurulation. The genetic basis of this process is still not well known. Whenever an NTD is diagnosed in one of a pair of twins, the other twin should also be evaluated for NTDs.

  3. [Twin dystocia: about one case of compaction].

    Science.gov (United States)

    Desseauve, D; Voluménie, J-L

    2008-09-01

    We report a case of twin dystocia during the evacuation of full-term fetus both in cephalic presentation. A low-outlet forceps for second-phase arrest was performed for the first twin but the head remained stuck to maternal perineum, mimicking a shoulder dystocia. Digital examination found a twin compaction, that is the presence of the second twin's fetal head at the level of the first twin's chest. The discrepancy between fetal weights and the use of forceps could favor this rare complication. Various maneuvers were described previously attempted to solve the problem. Forcing back the second head may help to achieve delivery of the first twin.

  4. Growth curves for twins in Slovenia.

    Science.gov (United States)

    Bricelj, Katja; Blickstein, Isaac; Bržan-Šimenc, Gabrijela; Janša, Vid; Lučovnik, Miha; Verdenik, Ivan; Trojner-Bregar, Andreja; Tul, Nataša

    2017-02-01

    Abnormalities of fetal growth are more common in twins. We introduce the growth curves for monitoring fetal growth in twin pregnancies in Slovenia. Slovenian National Perinatal Information System for the period between 2002 and 2010 was used to calculate birth weight percentiles for all live born twins for each week from 22nd to 40th week. The calculated percentiles of birth weight for all live-born twins in Slovenia served as the basis for drawing 'growth' curves. The calculated growth curves for twins will help accurately diagnose small or large twin fetuses for their gestational age in the native central European population.

  5. Robust Rudder Roll Damping Control

    DEFF Research Database (Denmark)

    Yang, C.

    -infinity theory is used to deal with the problem. The necessary mathematical tools and the H-Infinity theory as the basis of controller design are presented in Chapter 2 and 3. The mu synthesis and the D-K iteration are introduced in Chapter 3. The ship dynamics and modeling technology are discussed in Chapter 4......The results of a systematic research to solve a specific ship motion control problem, simultaneous roll damping and course keeping using the rudder are presented in this thesis. The fundamental knowledge a priori is that rudder roll damping is highly sensitive to the model uncertainty, therefore H......, two kinds of ship model have been obtained: linear ship model used for designing the controller and nonlinear model used for simulation. The ship model uncertainty is discussed in this chapter and so is a wave model because the ship's roll motion is caused by waves. Using an unstructured model...

  6. Hot rolling of thick uranium molybdenum alloys

    Science.gov (United States)

    DeMint, Amy L.; Gooch, Jack G.

    2015-11-17

    Disclosed herein are processes for hot rolling billets of uranium that have been alloyed with about ten weight percent molybdenum to produce cold-rollable sheets that are about one hundred mils thick. In certain embodiments, the billets have a thickness of about 7/8 inch or greater. Disclosed processes typically involve a rolling schedule that includes a light rolling pass and at least one medium rolling pass. Processes may also include reheating the rolling stock and using one or more heavy rolling passes, and may include an annealing step.

  7. DEFECTS SIMULATION OF ROLLING STRIP

    Directory of Open Access Journals (Sweden)

    Rudolf Mišičko

    2009-06-01

    Full Text Available The defects in the continuous casting slabs can be developed or kept down in principle by rolling technology, especially depend to sort, size and distribution of primary defects, as well as used of rolling parameters. Scope of the article is on observation behavior artificial surface and undersurface defects (scores without filler (surface defects and filling by oxides and casting powder (subsurface defects. First phase of hot rolling process have been done by software simulation DEFORM 3D setting to the limited condition for samples with surface defects. Samples of material with low-carbon steel of sizes h x b x l have been chosen and the surface defects shape „U” and „V” of scores have been injected artificially by software. The process of rolling have been simulated on the deformation temperatures 1200°C and 900°C, whereas on the both of this deformation temperatures have been applied amount of deformation 10 and 50 %. With respect to the process of computer simulation, it is not possible to truthful real oxidation condition (physical – chemical process during heat of metal, in the second phase of our investigation have been observed influence of oxides and casting powders inside the scores for a defect behavior in plastic deformation process (hot and cold rolling process in laboratory condition. The basic material was STN steel class 11 375, cladding material was steel on the bases C-Mn-Nb-V. Scores have been filled by scales to get from the heating temperatures (1100°C a 1250°C, varied types of casting powders, if you like mixture of scale and casting powders in the rate 1:4. The joint of the basic and cladding material have been done by peripheral welded joint. Experiment results from both phases are pointed on the evolution of original typology defects in rolling process.

  8. Roll Control in Fruit Flies

    OpenAIRE

    Beatus, Tsevi; Guckenheimer, John M.; Cohen, Itai

    2014-01-01

    Due to aerodynamic instabilities, stabilizing flapping flight requires ever-present fast corrective actions. Here we investigate how flies control body roll angle, their most susceptible degree of freedom. We glue a magnet to each fly, apply a short magnetic pulse that rolls it in mid-air, and film the corrective maneuver. Flies correct perturbations of up to $100^{\\circ}$ within $30\\pm7\\mathrm{ms}$ by applying a stroke-amplitude asymmetry that is well described by a linear PI controller. The...

  9. Twin-twin transfusion syndrome: neurodevelopmental screening test

    Directory of Open Access Journals (Sweden)

    Amabile Vessoni Arias

    2015-03-01

    Full Text Available Objective To assess the neurodevelopmental functions (cognition, language and motor function of survivors of twin-twin transfusion syndrome (TTTS. Method Observational cross-sectional study of a total of 67 monochorionic diamniotic twins who underwent fetoscopic laser coagulation (FLC for treatment of TTTS. The study was conducted at the Center for Investigation in Pediatrics (CIPED, Universidade Estadual de Campinas. Ages ranged from one month and four days to two years four months. Bayley Scales of Infant and Toddler Development Screening Test-III, were used for evaluation. Results Most children reached the competent category and were classified as having appropriate performance. The preterm children scored worse than term infants for gross motor subtest (p = 0.036. Conclusion The majority of children reached the expected development according to their age. Despite the good neurodevelopment, children classified at risk should be monitored for development throughout childhood.

  10. Vertical Vibration Model for Unsteady Lubrication in Rolls-Strip Interface of Cold Rolling Mills

    Directory of Open Access Journals (Sweden)

    Xu Yang

    2012-01-01

    Full Text Available According to the vertical vibration phenomena existing in cold rolling mills, the unsteady lubrication mechanism in roll gap and its influence to rolling stability was chosen as the case for analysis. On the basis of rolling theory, lubrication and friction theory, and mechanic vibration theory, the vertical vibration model for unsteady lubrication in rolls-strip interface was presented. The Geometry model of roll gap, the unsteady lubrication model of roller-strip working interface, the distribution model of normal rolling stress and friction stress, and the rolling vertical structure model were taken into account. Based on the rolling equipment and process parameters of aluminium mill, the rolling force curve and dynamic response of working roll displacement variation was simulated on Matlab/Simulink platform. A comparison with actual production data shows the validity of this vibration model.

  11. The effect of roll with passive segment on the planetary rolling process

    Directory of Open Access Journals (Sweden)

    Qing-Ling Zeng

    2015-03-01

    Full Text Available In three-roll planetary rolling process, there is secondary torsion phenomenon that may lead to rolling instability. This article proposed a new idea to alleviate the secondary torsion phenomenon by dividing the secondary torsion segment out of the roll as an independent and passive one. To study the performance of the roll with passive segment, the three-dimensional finite element models of planetary rolling process using actual roll or new roll with passive segment involving elastic–plastic and thermal–mechanical coupling were established by the software ABAQUS/Explicit, and a series of analysis had been done successfully. The rolling temperature and rolling force of planetary mill were in good agreement with the measured results, which indicated that the finite element method would supply important reference merit for three-dimensional thermo-mechanical simulation of the three-roll planetary rolling process. Comparing the simulation results of the two models, the results indicated that the change in the roll structure had just a little influence on the metal deformation, temperature, and rolling force, but it lessened the secondary torsion deformation effectively and improved the outside roundness of the rolled tube slightly. The research provided a new idea for the roll design of three-roll planetary mill (PSW.

  12. Optimization of Cold Rolling and Subsequent Annealing Treatment on Mechanical Properties of TWIP Steel

    Science.gov (United States)

    Zamani, D.; Golshan, A.; Dini, G.; Ismarrubie, Z. N.; Azmah Hanim, M. A.; Sajuri, Z.

    2017-08-01

    This research work studied the effect of cold rolling reduction and subsequent annealing temperature on the microstructural evolution and the mechanical properties of Fe-32Mn-4Si-2Al twinning-induced plasticity steel plates. For this, uniaxial tensile tests were carried out for three cold rolling reductions (50, 65 and 80%) and subsequent annealing treatment at 550-750 °C for 1.8 ks. The results were discussed in terms of the yield strength, ultimate tensile strength and total elongation and its dependence on the introduced microstructure. Regression analysis was used to develop the mathematical models of the mechanical properties. Moreover, analysis of variance was employed to verify the precision of the mathematical models. Finally, desirability function was used as an effective optimization approach for multi-objective optimization of the cold rolling reduction and annealing temperature. It is considerable that there is no research attempting to find optimum mechanical properties of the steels using this approach. The results indicated that applying large cold rolling reduction (upper than 75%) and subsequent annealing treatment in the recovery region and also the application of large cold rolling reduction and the subsequent annealing treatment in the lower limit of partial recrystallization region were effective methods to obtain an excellent combination of mechanical properties.

  13. Texture formation in orthorhombic alpha-uranium under simple compression and rolling to high strains

    Science.gov (United States)

    Zecevic, Miroslav; Knezevic, Marko; Beyerlein, Irene J.; McCabe, Rodney J.

    2016-05-01

    We study the mechanical response and texture evolution of alpha-uranium during simple compression and rolling at 573 K. In order to determine the underlying mechanisms governing plasticity and texture formation, we perform detailed characterizations using electron backscattered diffraction and constitutive modeling using a dislocation-density based hardening law within a visco-plastic self-consistent homogenization. We show that the model achieves good agreement with experimental measurements in terms of texture and stress-strain response. From detailed comparison of experimental and modeling results, we infer that in both through-thickness compression (TTC) and rolling at 573K, the active slip modes are floor slip (001)[100] and chimney slip 1 / 2 { 110 } with slightly different ratios. However, { 130 } twinning is not active in TTC compression but profuse during rolling. Further analysis indicates that during rolling, floor slip (001)[100] results in the formation of two pronounced (001) texture peaks tilted 10-15° away from the normal toward the rolling direction.

  14. On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel During Cold Rolling

    Science.gov (United States)

    Haase, Christian; Chowdhury, Sandip Ghosh; Barrales-Mora, Luis A.; Molodov, Dmitri A.; Gottstein, Günter

    2013-02-01

    In the present study, microstructure and texture evolution in an austenitic Fe-28 wt pct Mn-0.28 wt pct C TWIP steel in the range between 10 and 80 pct reduction by cold rolling were systematically analyzed. The formation of the observed microstructural features occurred in three different stages: I (10 to 20 pct)—mainly slip lines, grain elongation, and formation of few twin-matrix lamellae; II (30 to 50 pct)—severe increase of the volume fraction of twins, alignment of twins with the rolling plane, and formation of microshear bands; and III (60 to 80 pct)—further alignment of twins, evolution of a herring bone structure, and macroshear bands. In contrast to most f.c.c. metals, the transition from Copper- to Brass-type texture occurred at low strain levels (30 pct). This behavior is attributed to the early formation of deformation twins in the material and can be related to the SFE of this high manganese steel. At higher reduction levels, microscopic (≥40 pct) and macroscopic shear band formation (≥60 pct) contributed to the increase of randomly oriented grains, mainly at the expense of the Brass component. Furthermore, the formation of the Goss component and of the //ND fiber (γ) is attributed to severe twin formation.

  15. Complications Arising in Twin Pregnancy: Findings of Prenatal Ultrasonography

    Science.gov (United States)

    Kim, Jeong-Ah; Lee, Young Ho; Song, Mi Jin; Min, Jee-Yeon; Lee, Hak Jong; Han, Byoung Hee; Lee, Kyung-Sang; Cho, Byung Jae; Chun, Yi-Kyeong

    2003-01-01

    Multifetal gestations are high-risk pregnancies involving higher perinatal morbidity and mortality, and are subject to unique complications including twin oligohydramnios-polyhydramnios sequence, twin-to-twin transfusion syndrome, acardiac twins, conjoined twins, co-twin demise, and heterotopic pregnancies. The purpose of this study is to describe the prenatal ultrasonographic and pathologic findings of these complications. PMID:12679635

  16. Risk of Oral Clefts in Twins

    DEFF Research Database (Denmark)

    Grosen, Dorthe; Bille, Camilla; Petersen, Inge

    2011-01-01

    BACKGROUND:: Small studies have indicated that twinning increases the risk of oral cleft. METHODS:: We used data from a Danish national population-based cohort study to investigate whether twinning was associated with isolated oral cleft, and to estimate the twin probandwise concordance rate...... and heritability. Twins (207 affected/130,710) and singletons (7766 affected/4,798,526) born from 1936 through 2004 in Denmark were ascertained by linkage among the Danish Facial Cleft Database, the Danish Twin Registry, and the Civil Registration System. We computed oral cleft prevalence and prevalence proportion...... ratio for twins versus singletons, stratified for 3 subphenotypes. Probandwise concordance rates and heritability for twins were estimated for 2 phenotypes-cleft lip with or without cleft palate (CL/P) and cleft palate (CP). RESULTS:: The prevalence of oral cleft was 15.8 per 10,000 twins and 16.6 per...

  17. Nike Twins Seven Seven: Nigerian Batik Artist.

    Science.gov (United States)

    LaDuke, Betty

    1987-01-01

    Chronicles the personal and professional life of Nike Twins Seven Seven (born 1951), a Nigerian batik artist, and her husband, Twins Seven Seven, a musician-artist, both of whom have received international acclaim. (BJV)

  18. Preterm twin gestation and cystic periventricular leucomalacia

    NARCIS (Netherlands)

    Resch, B; Jammernegg, A; Vollaard, E; Maurer, U; Mueller, WD; Pertl, B

    Objective: To identify risk factors for the development of cystic periventricular leucomalacia (PVL) in twin gestation. Design: Retrospective case-control study. Setting: Tertiary care university hospital, Department of Paediatrics, Division of Neonatology, Graz, Austria. Patients: Preterm twin

  19. Congenital diaphragmatic hernia in identical twins

    Directory of Open Access Journals (Sweden)

    Mustafa T Gurbaz

    2012-01-01

    Full Text Available Congenital diaphragmatic hernia (CDH, Bochdalek type is rarely seen in both members of identical twins. Herein, we report a 37 weeks′ twins with CDH along with a brief review of the literature. Both the neonates survived.

  20. Significance of donor anuria differs between monoamniotic and diamniotic twin-twin transfusion syndrome

    NARCIS (Netherlands)

    Schaap, A. H. P.; van den Wijngaard, J. P. H. M.; Nikkels, P. G. J.; van den Broek, A. J. M.; Snieders, I.; van Gemert, M. J. C.

    2007-01-01

    Development of severe twin-twin transfusion syndrome (TTTS) in diamniotic-monochorionic twins includes five stages of increasing severity, i.e. recipient polyhydramnios and donor oligohydramnios, donor anuria, abnormal umbilical flow velocities in either twin, hydrops in the recipient, and

  1. Twin and triple peaks papilledema.

    Science.gov (United States)

    Mehta, Jodhbir S; Plant, Gordon T; Acheson, James F

    2005-07-01

    To describe 2 adult patients who presented with papilledema after band atrophy (i.e., twin and triple peaks papilledema). Retrospective small case series. Two outpatients. Observations made on 2 patients whose cases were reviewed in the neuro-ophthalmology clinic. The first patient had a pituitary tumor presenting with papilledema, causing a triple peaks clinical sign. Color photographs, optical coherence tomograms, and magnetic resonance images are shown. The second patient developed twin peaks papilledema due to a chiasmal glioma causing secondary raised intracranial pressure. Twin peaks papilledema is a rare clinical sign that may develop in adults as well as in children. The first report and optical coherence tomography features of triple peaks papilledema illustrate a new clinical sign.

  2. Twins or two single children

    Directory of Open Access Journals (Sweden)

    2002-08-01

    Full Text Available Based on Swedish register data, we compared the influence of a twin birth on the divorce risk with the influence of the sequential birth of two single children. The divorce risk for a woman with a very young child was lower than the risk for women without children or women with children older than 3.5 years. This behaviour was essentially independent of the number of children and whether or not the woman gave birth to twins. The effect of parity was much smaller than the effect of child age. The influence of twins on the divorce risk appeared to fall between that of a first and a second singleton.

  3. The Fourth International Network of Twin Registries: Overview from Osaka/Research Reviews: Familial Fraternal Twinning; Twin Study of Masculine Faces; Physical Aggression and Epigenetics; Prenatal Education for Parents of Twins/Current Events: 2016 Guinness Book of World Records; Oldest Living Male Twins; Twins Reunited at Sixty-Nine; Panda Twins; Twins.com.

    Science.gov (United States)

    Segal, Nancy L

    2015-12-01

    The 4th International Network of Twin Registries (INTR) Consortium Meeting took place in Osaka, Japan, September 28-29, 2015. The venue was the Osaka Medical Center for Medical Innovation and Translational Research. An overview of presentations and other activities is provided. Next, 1930s research on familial fraternal twinning, preference for masculine faces, physical aggression and epigenetics, and a prenatal education program for parents of multiples are described. Current twin-related events include the 2016 Guinness Book of World Records (GWR), the oldest living male twins, newly reunited twins, the birth of panda twins and a controversial twin-based website.

  4. Fatique life and twinning in alphazirconium

    DEFF Research Database (Denmark)

    Warren, M.R.; Beevers, C.J.

    1970-01-01

    −21}, and {11•22} twins and {1O−10} slip. In grains completely enclosed by surrounding material fatigue damage has been found in association with 11•21 twins and very occasionally with {11−22} twins but not with 10•12 twins. A further quantitative interpretation has shown that there is a critical resolved shear...... direction. Formerly with the Department of Physical Metallurgy and Science of Materials, The University, Birmingham, England...

  5. Remembering Irving I. Gottesman: Twin Research Colleague and Friend Extraordinaire/Research Studies: Face-Lift Technique Comparison in Identical Twins; Raising Preterm Twins; Fetal Behavior in Dichorionic Twin Pregnancies; Co-Bedding and Stress Reduction in Twins/Public Interest: Identical Co-Twins' Same Day Delivery; Teaching Twins in Bosnia; Twin Auctioneers; Sister, the Play.

    Science.gov (United States)

    Segal, Nancy L

    2016-12-01

    Dr Irving I. Gottesman, a colleague, friend, and long-time member of the International Society of Twin Studies passed away on June 29, 2016. His contributions to twin research and some personal reflections are presented to honor both the man and the memory. This tribute is followed by short reviews of twin research concerning differences between cosmetic surgical techniques, the rearing of preterm twins, behavioral observations of dichorionic fetal twins, and the outcomes of co-bedding twins with reference to stress reduction. Interesting and informative articles in the media describe identical co-twins who delivered infants on the same day, educational policies regarding twins in Bosnia and the United Kingdom, unusual practices of twin auctioneers, and a theatrical production, Sister, featuring identical twins in the leading roles.

  6. Twins or two single children

    OpenAIRE

    Rainer Walke

    2002-01-01

    Based on Swedish register data, we compared the influence of a twin birth on the divorce risk with the influence of the sequential birth of two single children. The divorce risk for a woman with a very young child was lower than the risk for women without children or women with children older than 3.5 years. This behaviour was essentially independent of the number of children and whether or not the woman gave birth to twins. The effect of parity was much smaller than the effect of child age. ...

  7. Concordance for multiple sclerosis in Danish twins

    DEFF Research Database (Denmark)

    Hansen, T; Skytthe, Axel; Stenager, Egon

    2005-01-01

    The occurrence of multiple sclerosis (MS) in twins has not previously been studied in complete nationwide data sets. The existence of almost complete MS and twin registries in Denmark ensures that essentially unbiased samples of MS cases among twins can be obtained. In this population-based study...

  8. First-trimester diagnosis of conjoined twins

    NARCIS (Netherlands)

    Pajkrt, Eva; Jauniaux, Eric

    2005-01-01

    Conjoined twins are a rare and complex complication of monozygotic twinning, which is associated with high perinatal mortality. Early prenatal diagnosis of conjoined twins allows better counselling of the parents regarding the management options, including continuation of pregnancy with post-natal

  9. Protease inhibitor (Pi) locus, fertility and twinning

    NARCIS (Netherlands)

    Boomsma, D.I.; Frants, R.R.; Bank, R.A.; Martin, N.G.

    1992-01-01

    In a sample of 160 Dutch twin pairs and their parents, we found that mothers of dizygotic twins had frequencies of the S and Z alleles at the protease inhibitor (Pi) locus that were 3 times higher than a control sample. Mothers of identical twins also had a higher frequency of S than controls. The S

  10. A study of malocclusion in identical twins

    Directory of Open Access Journals (Sweden)

    E. Akhavan Niaki

    1998-04-01

    Full Text Available   Monozygotic twins are genetically identical individuals who can also be mirror image twins and the Differences between them result from environmental factors. current study, monozygotic twins were analyzed in different dentitions of primary, mixed and permanent. As a conclusion, although genetic factors are naturally potent, environmental factors’ role can be increased and weaken the genetic factors.

  11. Epigenetic Epidemiology of Complex Diseases Using Twins

    DEFF Research Database (Denmark)

    Tan, Qihua

    2013-01-01

    through multiple epigenetic mechanisms. This paper reviews the new developments in using twins to study disease-related epigenetic alterations, links them to lifetime environmental exposure with a focus on the discordant twin design and proposes novel data-analytical approaches with the aim of promoting...... a more efficient use of twins in epigenetic studies of complex human diseases....

  12. Maintenance Appointments in Railway Rolling Stock Rescheduling

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo); M.E. Schmidt (Marie)

    2016-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of the disrupted passenger trains has to be rescheduled in order to restore a feasible rolling stock circulation. Usually, a

  13. Sports pairs: insights on athletic talent; research reviews: twins with leukemia; parents and twins.

    Science.gov (United States)

    Segal, Nancy L

    2007-06-01

    Twin research exploring genetic and environmental influences on athletic interests and talents is reviewed. Illustrative examples of twin athletes representing a variety of sports activities are presented. This is followed by an overview of twin studies offering critical insights into the onset and progress of leukemia. In the last section, timely events involving twins and parents of twins will be described--each case provides a new look at an old question.

  14. Four twins for a paradox: on "sensitive" twins and the biological counterpart of the "twin paradox".

    Science.gov (United States)

    Ascioti, Fortunato A

    2009-03-01

    Monozygotic twin (MZT) epigenetic development, i.e., aging, diverges largely in time despite the initially very small genetic differences between MZTs. This fact is interpreted as a "sensitivity to initial conditions" phenomenon, a common property of either deterministic or stochastic chaotic systems. Some of the biotheoretical implications stemming from this empirical observation are briefly discussed here, while an actual measure of MZT epigenetic time divergence is given through an estimate of the (Stochastic) Lyapunov exponents (LEs) (i.e., the rate of exponential time divergence). These results suggest a reconsideration of the Langevin-Einstein thought experiment known as the "twin paradox." At least four twins are necessary in order to take into account the inertially independent divergent aging described here. Alternatively, LE estimates, like those given here, should be used. Finally suggested in the actual special-relativity experiments is the replacement of clocks with some nonlinear (chaotic) forced oscillator.

  15. Similarity of social security numbers among twins: data from the Virginia Twin Registry.

    Science.gov (United States)

    Page, W F; Corey, L

    1998-09-01

    At least two twin registries in the United States have been or are being assembled using the similarity of Social Security Numbers in computerized records to help identify possible twin pairs. While the success of such enterprises depends directly on a high probability of twinness given Social Security Numbers, there are theoretical and practical reasons to study the probability of Social Security Number similarity given twinness. For example, the number of twin pairs with similar Social Security Numbers obviously determines the maximum number of twin pairs that can be discovered by similarity algorithms. To study this issue, we examined the similarity of known Social Security Numbers in twin pairs from the Virginia Twin Registry by age, sex, race, and zygosity of the pair. We found that similarity between the Social Security Numbers of twin pairs varies markedly by age, and MZ twin pairs have significantly more similar Social Security Numbers than DZ pairs at all ages. Among older twins, there are also significant differences by sex and race. For younger twins, algorithms that identify putative twin pairs on the basis of the similarity of their Social Security Numbers hold the promise of being able to identify a large proportion of all true twin pairs. Such algorithms will be substantially less successful, however, in identifying a large proportion of older twin pairs.

  16. Engineering study for a melting, casting, rolling and fabrication facility for recycled contaminated stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    This Preliminary Report is prepared to study the facilities required for recycling contaminated stainless steel scrap into plate which will be fabricated into boxes suitable for the storage of contaminated wastes and rubble. The study is based upon the underlying premise that the most cost effective way to produce stainless steel is to use the same processes employed by companies now in production of high quality stainless steel. Therefore, the method selected for this study for the production of stainless steel plate from scrap is conventional process using an Electric Arc Furnace for meltdown to hot metal, a Continuous Caster for production of cast slabs, and a Reversing Hot Mill for rolling the slabs into plate. The fabrication of boxes from the plate utilizes standard Shears, Punch Presses and welding equipment with Robotic Manipulators. This Study presumes that all process fumes, building dusts and vapors will be cycled through a baghouse and a nuclear grade HEPA filter facility prior to discharge. Also, all process waste water will be evaporated into the hot flue gas stream from the furnace utilizing a quench tank; so there will be no liquid discharges from the facility and all vapors will be processed through a HEPA filter. Even though HEPA filters are used today in controlling radioactive contamination from nuclear facilities there is a sparsity of data concerning radioactivity levels and composition of waste that may be collected from contaminated scrap steel processing. This report suggests some solutions to these problems but it is recommended that additional study must be given to these environmental problems.

  17. Engineering study for a melting, casting, rolling and fabrication facility for recycled contaminated stainless steel

    International Nuclear Information System (INIS)

    1994-01-01

    This Preliminary Report is prepared to study the facilities required for recycling contaminated stainless steel scrap into plate which will be fabricated into boxes suitable for the storage of contaminated wastes and rubble. The study is based upon the underlying premise that the most cost effective way to produce stainless steel is to use the same processes employed by companies now in production of high quality stainless steel. Therefore, the method selected for this study for the production of stainless steel plate from scrap is conventional process using an Electric Arc Furnace for meltdown to hot metal, a Continuous Caster for production of cast slabs, and a Reversing Hot Mill for rolling the slabs into plate. The fabrication of boxes from the plate utilizes standard Shears, Punch Presses and welding equipment with Robotic Manipulators. This Study presumes that all process fumes, building dusts and vapors will be cycled through a baghouse and a nuclear grade HEPA filter facility prior to discharge. Also, all process waste water will be evaporated into the hot flue gas stream from the furnace utilizing a quench tank; so there will be no liquid discharges from the facility and all vapors will be processed through a HEPA filter. Even though HEPA filters are used today in controlling radioactive contamination from nuclear facilities there is a sparsity of data concerning radioactivity levels and composition of waste that may be collected from contaminated scrap steel processing. This report suggests some solutions to these problems but it is recommended that additional study must be given to these environmental problems

  18. Perovskite solar cells for roll-to-roll fabrication

    Directory of Open Access Journals (Sweden)

    Uddin Ashraf

    2017-01-01

    Full Text Available Perovskite solar cell (PSCs is considered as the game changer in emerging photovoltaics technology. The highest certified efficiency is 22% with high temperature processed (∼500 °C TiO2 based electron transport layer (ETL. High temperature process is a rudimentary hindrance towards roll-to-roll processing of PSCs on flexible substrates. Low temperature solution process (<150 °C ZnO based ETL is one of the most promising candidate for large scale roll-to-roll fabrication of cells as it has nearly identical electron affinity (4.2 eV of TiO2. The mixed organic perovskite (MA0.6FA0.4PbI3 devices with Al doped ZnO (AZO ETL demonstrate average cell efficiency over 16%, which is the highest ever reported efficiency for this device configuration. The energy level alignment and related interfacial charge transport dynamics at the interface of ZnO and perovskite films and the adjacent charge transport layers are investigated. Significantly improved device stability, hysteresis free device photocurrent have been observed in MA0.6FA0.4PbI3 cells. A systematic electrochemical impedance spectroscopy, frequency dependent capacitance spectra, surface morphology and topography characterization have been conducted to understand the role of interfacial electronic properties between perovskite and neighbouring layers in perovskite device. A standardized degradation study, interfacial electronic property and capacitive spectra analysis of aged device, have been measured to understand the enhanced device stability in mixed MA0.6FA0.4PbI3 cells. Slow perovskite material decomposition rate and augmented device lifetime with AZO based devices have been found to be correlated with the more hydrophobic and acidic nature of AZO surface compared to pristine ZnO film.

  19. On the constant-roll inflation

    Science.gov (United States)

    Yi, Zhu; Gong, Yungui

    2018-03-01

    The primordial power spectra of scalar and tensor perturbations during slow-roll inflation are usually calculated with the method of Bessel function approximation. For constant-roll or ultra slow-roll inflation, the method of Bessel function approximation may be invalid. We compare the numerical results with the analytical results derived from the Bessel function approximation, and we find that they differ significantly on super-horizon scales if the constant slow-roll parameter ηH is not small. More accurate method is needed for calculating the primordial power spectrum for constant-roll inflation.

  20. Elizabeth M. Bryan: tributes from home and abroad; research reviews: anorexia nervosa in opposite-sex twins, twin study of self-esteem, DNA differences in monozygotic twins; twins and more twins: twins living apart, twins playing together, twins working together, twins playing apart, multiple birth odds.

    Science.gov (United States)

    Segal, Nancy L

    2008-06-01

    Elizabeth M. Bryan: Tributes From Home and Abroad May 13, 1942 - February 21, 2008 The life and work of Dr Elizabeth M. Bryan, our late distinguished twin studies colleague, are remembered. Tributes come from colleagues in the United States and the United Kingdom, where Elizabeth lived and worked. This section is followed by reviews of twin research on anorexia nervosa, self-esteem and DNA differences in monozygotic twins. The lives of some noteworthy twins are also briefly chronicled, both for their scientific value and human interest. An update on current twinning rates follows.

  1. Twin Peaks (B/W)

    Science.gov (United States)

    1997-01-01

    The Twin Peaks are modest-size hills to the southwest of the Mars Pathfinder landing site. They were discovered on the first panoramas taken by the IMP camera on the 4th of July, 1997, and subsequently identified in Viking Orbiter images taken over 20 years ago. The peaks are approximately 30-35 meters (-100 feet) tall. North Twin is approximately 860 meters (2800 feet) from the lander, and South Twin is about a kilometer away (3300 feet). The scene includes bouldery ridges and swales or 'hummocks' of flood debris that range from a few tens of meters away from the lander to the distance of the South Twin Peak. The large rock at the right edge of the scene is nicknamed 'Hippo'. This rock is about a meter (3 feet) across and 25 meters (80 feet) distant.Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology (Caltech). The IMP was developed by the University of Arizona Lunar and Planetary Laboratory under contract to JPL. Peter Smith is the Principal Investigator.

  2. Digital twins in farm management

    NARCIS (Netherlands)

    Verdouw, C.N.; Kruize, J.W.

    2017-01-01

    The Internet of Things (IoT) provides a vision of a world in which the Internet extends into the real world embracing everyday objects. In the IoT, physical objects are accompanied by Digital Twins: virtual, digital equivalents to physical objects. The interaction between real/physical and

  3. Comparison intercuspal mandible position twins

    Directory of Open Access Journals (Sweden)

    Kučević Esad

    2015-01-01

    Full Text Available The twins are the miracle of fetal biology, medical reproductive challenge, the closest and most durable biological connection. The aim is to identify, evaluate and compare the type, number and location interjaw functional contacts in the intercuspal position of the mandible, with MZ monozygotic (identical twins. Analysis of occlusal relationships in the most stable-intercuspal comparison was done on a sample of 60 identical twins, by 15 female and 15 male pairs, chronological ages 18 to 40, in which the means of articulation papers specific localization and distribution of contact relationships, in the region of the lateral teeth. Results of this study showed that in the lateral region, 57 respondents or 95%, has the modalities of occlusal relationships lump-ridges-marginal edge. Average more occlusal contacts identified in males (25.1 than in female twin pairs (19.1. Also, in male couples registered more three points (M: F = 7: 1, two points by gender is equal 24:12, and contacts at one point they outnumber men (22, compared to female respondents (18. Less Similarities than expected sameness, proving that the number, distribution and intensity of occlusal contacts in the mandible vary individually.

  4. Tuberous Sclerosis in Identical Twins

    Directory of Open Access Journals (Sweden)

    Dinesh C Govil

    1987-01-01

    Full Text Available Tuberous sclerosis was, observed in six year old identical twin brothers born with single placenta and a single amnion. Both had adenoma sebaceum shagreen patches, ash leaf spots and progressive mental deterioration. One of them had a verrucous pigmented nevus on the, left temple and recurrent localized motor seizures.

  5. Fetal growth disorders in twin gestations.

    LENUS (Irish Health Repository)

    Breathnach, Fionnuala M

    2012-06-01

    Twin growth is frequently mismatched. This review serves to explore the pathophysiologic mechanisms that underlie growth aberrations in twin gestations, the prenatal recognition of abnormal twin growth, and the critical importance of stratifying management of abnormal twin growth by chorionicity. Although poor in utero growth of both twins may reflect maternal factors resulting in global uteroplacental dysfunction, discordant twin growth may be attributed to differences in genetic potential between co-twins, placental dysfunction confined to one placenta only, or one placental territory within a shared placenta. In addition, twin-twin transfusion syndrome represents a distinct entity of which discordant growth is a common feature. Discordant growth is recognized as an independent risk factor for adverse perinatal outcome. Intertwin birth weight disparity of 18% or more should be considered to represent a discordance threshold, which serves as an independent risk factor for adverse perinatal outcome. At this cutoff, perinatal morbidity is found to increase both for the larger and the smaller twin within a discordant pair. There remains uncertainty surrounding the sonographic parameters that are most predictive of discordance. Although heightening of fetal surveillance in the face of discordant twin growth follows the principles applied to singleton gestations complicated by fetal growth restriction, the timing of intervention is largely influenced by chorionicity.

  6. Improved Dutch Roll Approximation for Hypersonic Vehicle

    Directory of Open Access Journals (Sweden)

    Liang-Liang Yin

    2014-06-01

    Full Text Available An improved dutch roll approximation for hypersonic vehicle is presented. From the new approximations, the dutch roll frequency is shown to be a function of the stability axis yaw stability and the dutch roll damping is mainly effected by the roll damping ratio. In additional, an important parameter called roll-to-yaw ratio is obtained to describe the dutch roll mode. Solution shows that large-roll-to-yaw ratio is the generate character of hypersonic vehicle, which results the large error for the practical approximation. Predictions from the literal approximations derived in this paper are compared with actual numerical values for s example hypersonic vehicle, results show the approximations work well and the error is below 10 %.

  7. Unusual hardening behaviour in heavily cryo-rolled Cu-Al-Zn alloys during annealing treatment

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Y.L. [Faculty of Science, Kunming University of Science and Technology, Kunming 650500 (China); Ren, S.Y. [Ningbo Powerway Alloy Material Co., Ltd, Ningbo 315135 (China); Zeng, S.D. [Yunnan Institute of Measuring and Testing Technology, Kunming 650228 (China); Zhu, X.K., E-mail: xk_zhu@hotmail.com [Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming 650500 (China)

    2016-04-06

    Three nanostructured Cu-Al-Zn alloys were produced via rolling at the liquid nitrogen temperature. The deformed Cu alloys were then annealed at 150–300 °C for 1 h. The two alloys with high solute content and thus with low stacking fault energy exhibit unusual annealing hardening, namely, an increase in hardness and strength and a decrease in tensile elongation after annealing at 150 and 200 °C. From X-ray diffraction (XRD) analysis and microstructural observations by transmission electron microscopy (TEM), it is found that microstrain and dislocation density decrease after annealing at 200 °C because of the recovery of dislocations and the lattice parameter decreases due to solute segregation. Meanwhile, the twin density of the two Cu alloys increases and grain size remains basically unchanged. It is shown that the formation of annealing twins and stacking faults and the segregation of solute atoms may be the main causes of unusual annealing hardening.

  8. Register-based research on twins

    DEFF Research Database (Denmark)

    Christensen, Kaare; Ohm Kyvik, Kirsten; Holm, Niels V

    2011-01-01

    Introduction: The Danish Twin Registry (DTR) has for more than 50 years been based on surveys and clinical investigations and over the two last decades also on register linkage. Currently these two approaches are merged within Statistics Denmark. Research topics: Here we report on three major...... groups of register-based research in the DTR that used the uniqueness of twinning. First, we focus on the ''long-term prognosis'' of being a twin compared with being a singleton and show that Danish twins have health trajectories in adulthood similar to singletons, which is a result of interest for twins...... illustrate how the co-twin control method in a register setting can be used to control for the effect of rearing environment and genetic factors in studies of the association between exposures and health. CONCLUSION: The spectrum of register-based twin studies is very wide and have changed in accordance...

  9. Effect of plant growth promoting rhizobacteria, Nitroxin and sulfur on quantity and quality of caster bean (Ricinus Commines L. in Sistan region

    Directory of Open Access Journals (Sweden)

    S. Ghasemi

    2016-05-01

    Full Text Available The caster bean oil is high value in industry around of world. Plant nutrition and plant growth promoting rhizobacteria (PGPR are important for crop production. An experiment was set up to investigate the effect of nitrogen (N, sulfur (S fertilizers and PGPR on seed yield production of Ricinus commines L. This experiment was carry out in factorial layout based on complete randomize block design with three replicates at Research Center of University of Zabol during growing season of 2011-2012. The treatments were PGPR with three types of bacteria (control, Nitroxin , and Super Nitroplas 2 L.ha-1, three levels of nitrogen (0, 150 and 200 kg.ha-1 and two levels of sulfur fertilizer (0 and 300 kg.ha-1. The results showed that grain weight, 1000-seed weight, number of capsule and number of seed per plant were not affected by studied treatments. The highest effect of PGPR was on dry weight of capsule, plant height, number of leaf per plant, oil percentage and amount of seed protein. Number of inflorescence just affected by sulfur treatments and most of studied plant characters affected by N fertilizers. The highest and the lowest oil percentage were related to Nitroxin and Super Nitroplas 51.89 and 47.85, respectively. Also the highest and the lowest plant height were related to Nitroxin and control treatments 82.29 and 53.33, respectively.

  10. Optimization of flow control devices for a T-type five-strand billet caster tundish: water modeling and numerical simulation

    Directory of Open Access Journals (Sweden)

    Fei He

    2016-05-01

    Full Text Available The optimization of flow control devices (FCDs for a T-type five-strand billet caster tundish was carried out by water modeling and numerical simulation. In water modeling experiments, flow characteristics of the bare tundish and tundish configurations with designed U-type baffles and a round turbulence inhibitor were analyzed using residence time distribution (RTD curves. Mathematical models for liquid steel in the real plant tundish were established using the fluid dynamics software package Fluent. The flow field, the temperature field, and the RTD curves of liquid steel in the proposed tundish configurations were obtained. The results of numerical simulation and water modeling were validated with each other by the predicted and experimental RTD curves. The results of flow field and temperature field were used to reflect the actual state of a real plant tundish and to choose the optimal FCD. Finally, from the whole performance of the multi-strand tundish, the optimal scheme was determined by combining the results of water modeling and numerical simulation. With the optimal tundish equipped with U-type baffle with deflector holes and round turbulence inhibitor, not only was the flow characteristic of each strand improved, but also the difference of flow characteristics between multiple strands was smaller.

  11. 75 FR 42782 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-07-22

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United...-year reviews concerning the countervailing duty order on certain hot-rolled flat-rolled carbon-quality steel products (``hot-rolled steel'') from Brazil, the antidumping duty orders on hot-rolled steel from...

  12. Rolling Mill Hill, Nashville, TN

    Science.gov (United States)

    Rolling Mill Hill was the home to Nashville General Hospital from 1890 to the 1990s and encompassed several buildings and structures. These existing buildings of historical significance were re-used in the form of apartments. The original Trolley Barns on the site are now artists’ lofts and are home to several companies and non-profit offices. Nance Place, which entails additional buildings built on-site, is a Tax Credit Workforce Housing Development and is Platinum LEED certified.

  13. Nanogrid rolling circle DNA sequencing

    Energy Technology Data Exchange (ETDEWEB)

    Church, George M.; Porreca, Gregory J.; Shendure, Jay; Rosenbaum, Abraham Meir

    2017-04-18

    The present invention relates to methods for sequencing a polynucleotide immobilized on an array having a plurality of specific regions each having a defined diameter size, including synthesizing a concatemer of a polynucleotide by rolling circle amplification, wherein the concatemer has a cross-sectional diameter greater than the diameter of a specific region, immobilizing the concatemer to the specific region to make an immobilized concatemer, and sequencing the immobilized concatemer.

  14. Rolling Cylinder Phase 1bis

    DEFF Research Database (Denmark)

    Margheritini, Lucia

    Cylinder Phase 1: proof of concept and first optimization”, DCE report 115, ISSN 1901-726X, and it is recommended that the two are consulted together as they were firstly agreed to be in one document. The present report aims at estimate the efficiency of the Rolling Cylinder long model (previously...... optimized), by mean of physical tests in irregular waves. Several difficulties have been encountered during the testing, the biggest of witch being the extremely unfriendly torque measuring system....

  15. Advanced automobile steels subjected to plate rolling at 773 K or 1373 K

    Science.gov (United States)

    Torganchuk, Vladimir; Belyakov, Andrey; Kaibyshev, Rustam

    2017-12-01

    The high manganese steels exhibiting the effects of twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) demonstrate an excellent combination of enhanced formability, strength and ductility. Such unique mechanical properties make high-manganese steel the most attractive material for various applications, including the segment of advanced automobile steels. The strain hardening in such steels can be achieved through martensitic transformation, when the stacking fault energy (SFE) is about 10 mJ m-2, and/or twinning, when SFE is about 20 to 50 mJ m-2. The actual mechanical properties of high-Mn steels could vary, depending on the conditions of thermo-mechanical processing. In the present study, the effect of rolling temperature on the microstructure and mechanical properties of 18% Mn steels was clarified. The steels hot rolled at 1373 K were characterized by uniform almost equiaxed grains with near random crystallographic orientations that resulted in relatively low yield strengths of 300-360 MPa, followed by pronounced strain hardening that led to the total elongation above 60%. In contrast, the steels warm rolled at 773 K were characterized by flattened grains with a strong rolling texture and high yield strengths of 850-950 MPa combined with a total elongation of about 30%.

  16. Is that me or my twin? Lack of self-face recognition advantage in identical twins.

    Directory of Open Access Journals (Sweden)

    Matteo Martini

    Full Text Available Despite the increasing interest in twin studies and the stunning amount of research on face recognition, the ability of adult identical twins to discriminate their own faces from those of their co-twins has been scarcely investigated. One's own face is the most distinctive feature of the bodily self, and people typically show a clear advantage in recognizing their own face even more than other very familiar identities. Given the very high level of resemblance of their faces, monozygotic twins represent a unique model for exploring self-face processing. Herein we examined the ability of monozygotic twins to distinguish their own face from the face of their co-twin and of a highly familiar individual. Results show that twins equally recognize their own face and their twin's face. This lack of self-face advantage was negatively predicted by how much they felt physically similar to their co-twin and by their anxious or avoidant attachment style. We speculate that in monozygotic twins, the visual representation of the self-face overlaps with that of the co-twin. Thus, to distinguish the self from the co-twin, monozygotic twins have to rely much more than control participants on the multisensory integration processes upon which the sense of bodily self is based. Moreover, in keeping with the notion that attachment style influences perception of self and significant others, we propose that the observed self/co-twin confusion may depend upon insecure attachment.

  17. Keratoconus in 18 pairs of twins.

    Science.gov (United States)

    Tuft, Stephen J; Hassan, Hala; George, Sonia; Frazer, David G; Willoughby, Colin E; Liskova, Petra

    2012-09-01

    To describe the concordance of keratoconus in 18 sets of twins. Thirteen monozygotic (MZ) and five dizygotic (DZ) pairs of twins were identified during an investigation of familial keratoconus. We used 16 forensic microsatellite markers to confirm the zygosity of same sex twins. Patients and available relatives were examined for signs of keratoconus using corneal topography. For each pair of twins, the severity of keratoconus in each eye was graded according to the steepest keratometry value and the average difference in score between the MZ and DZ twins compared. All of the MZ twins and four of the five DZ twins were concordant for keratoconus but with differences in age of onset and severity of disease. The subjective age of onset of keratoconus tended to be earlier in the MZ twins (16.4 years, SD 4.66) than in the DZ twins (20.3 years, SD 7.55) (p=0.086). Additional relatives with keratoconus were identified in two (16%) of the families with MZ twins and in three (60%) of the families of DZ twins. The mean difference in severity scores was 1.4 (SD 1.73) for the MZ twins and 3.0 (SD 1.00) for the DZ twins (p=0.035). This data provide evidence that the severity of keratoconus is more concordant in MZ than in DZ twins. The results support the currently accepted hypothesis of an important genetic contribution towards the pathogenesis of keratoconus, but suggest that there is also an environmental effect on the expression of disease. © 2012 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.

  18. Rolling Contact Fatigue of Ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Wereszczak, Andrew A [ORNL; Wang, W. [Bournemouth University, Bournemouth, United Kingdom; Wang, Y. [Bournemouth University, Bournemouth, United Kingdom; Hadfield, M. [Bournemouth University, Bournemouth, United Kingdom; Kanematsu, W. [National Institute of Advanced Industrial Science and Technology, Japan; Kirkland, Timothy Philip [ORNL; Jadaan, Osama M. [University of Wisconsin, Platteville

    2006-09-01

    High hardness, low coefficient of thermal expansion and high temperature capability are properties also suited to rolling element materials. Silicon nitride (Si{sub 3}N{sub 4}) has been found to have a good combination of properties suitable for these applications. However, much is still not known about rolling contact fatigue (RCF) behavior, which is fundamental information to assess the lifetime of the material. Additionally, there are several test techniques that are employed internationally whose measured RCF performances are often irreconcilable. Due to the lack of such information, some concern for the reliability of ceramic bearings still remains. This report surveys a variety of topics pertaining to RCF. Surface defects (cracks) in Si{sub 3}N{sub 4} and their propagation during RCF are discussed. Five methods to measure RCF are then briefly overviewed. Spalling, delamination, and rolling contact wear are discussed. Lastly, methods to destructively (e.g., C-sphere flexure strength testing) and non-destructively identify potential RCF-limiting flaws in Si{sub 3}N{sub 4} balls are described.

  19. FCC Rolling Textures Reviewed in the Light of Quantitative Comparisons between Simulated and Experimental Textures

    DEFF Research Database (Denmark)

    Wierzbanowski, Krzysztof; Wroński, Marcin; Leffers, Torben

    2014-01-01

    The crystallographic texture of metallic materials has a very strong effect on the properties of the materials. In the present article, we look at the rolling textures of fcc metals and alloys, where the classical problem is the existence of two different types of texture, the "copper-type texture......} slip without or with deformation twinning, but we also consider slip on other slip planes and slip by partial dislocations. We consistently make quantitative comparison of the simulation results and the experimental textures by means of a scalar correlation factor. We find that the development...

  20. Social Comparison Orientation in Monozygotic and Dizygotic Twins.

    Science.gov (United States)

    Huguet, Pascal; Carlier, Michèle; Dolan, Conor V; de Geus, Eco J; Boomsma, Dorret I

    2017-12-01

    Twin research has offered evidence that monozygotic (MZ) twins are more socially close than dizygotic (DZ) twins, but has not paid much attention to the way twins compare themselves with their co-twin. The few studies in this area suggest that 'horizontal comparisons' (social comparison motivated by solidarity or communion with others) matter more for MZ twins than for DZ twins, at least when the co-twin is the social comparison standard. Consistent with this view, we predicted higher interest in MZ twins relative to DZ twins to select their co-twin rather than other people in general as the social comparison standard. The Social Comparison Orientation (SCO) scale, which measures the inclination to compare with others in a horizontal rather than vertical mode (comparing either upward or downward), was administered in 90 MZ pairs and 57 same-sex DZ pairs (63% female; average age 18.06 years) from the Netherlands Twin Register. MZ twin pairs showed significantly higher SCO scores than DZ twin pairs (with a large effect size) on the co-twin SCO, whereas the two groups did not differ from each other on the general SCO excluding the co-twin as social comparison standard. In MZ twin pairs, anxiety was associated with social comparison with others in general, not with their co-twin. For both scales, twin resemblance was explained by additive genetic variance. The present findings provide direct evidence that horizontal comparisons with the co-twin are of particular importance for MZ twins.

  1. Fingerprint recognition with identical twin fingerprints.

    Science.gov (United States)

    Tao, Xunqiang; Chen, Xinjian; Yang, Xin; Tian, Jie

    2012-01-01

    Fingerprint recognition with identical twins is a challenging task due to the closest genetics-based relationship existing in the identical twins. Several pioneers have analyzed the similarity between twins' fingerprints. In this work we continue to investigate the topic of the similarity of identical twin fingerprints. Our study was tested based on a large identical twin fingerprint database that contains 83 twin pairs, 4 fingers per individual and six impressions per finger: 3984 (83*2*4*6) images. Compared to the previous work, our contributions are summarized as follows: (1) Two state-of-the-art fingerprint identification methods: P071 and VeriFinger 6.1 were used, rather than one fingerprint identification method in previous studies. (2) Six impressions per finger were captured, rather than just one impression, which makes the genuine distribution of matching scores more realistic. (3) A larger sample (83 pairs) was collected. (4) A novel statistical analysis, which aims at showing the probability distribution of the fingerprint types for the corresponding fingers of identical twins which have same fingerprint type, has been conducted. (5) A novel analysis, which aims at showing which finger from identical twins has higher probability of having same fingerprint type, has been conducted. Our results showed that: (a) A state-of-the-art automatic fingerprint verification system can distinguish identical twins without drastic degradation in performance. (b) The chance that the fingerprints have the same type from identical twins is 0.7440, comparing to 0.3215 from non-identical twins. (c) For the corresponding fingers of identical twins which have same fingerprint type, the probability distribution of five major fingerprint types is similar to the probability distribution for all the fingers' fingerprint type. (d) For each of four fingers of identical twins, the probability of having same fingerprint type is similar.

  2. Fingerprint recognition with identical twin fingerprints.

    Directory of Open Access Journals (Sweden)

    Xunqiang Tao

    Full Text Available Fingerprint recognition with identical twins is a challenging task due to the closest genetics-based relationship existing in the identical twins. Several pioneers have analyzed the similarity between twins' fingerprints. In this work we continue to investigate the topic of the similarity of identical twin fingerprints. Our study was tested based on a large identical twin fingerprint database that contains 83 twin pairs, 4 fingers per individual and six impressions per finger: 3984 (83*2*4*6 images. Compared to the previous work, our contributions are summarized as follows: (1 Two state-of-the-art fingerprint identification methods: P071 and VeriFinger 6.1 were used, rather than one fingerprint identification method in previous studies. (2 Six impressions per finger were captured, rather than just one impression, which makes the genuine distribution of matching scores more realistic. (3 A larger sample (83 pairs was collected. (4 A novel statistical analysis, which aims at showing the probability distribution of the fingerprint types for the corresponding fingers of identical twins which have same fingerprint type, has been conducted. (5 A novel analysis, which aims at showing which finger from identical twins has higher probability of having same fingerprint type, has been conducted. Our results showed that: (a A state-of-the-art automatic fingerprint verification system can distinguish identical twins without drastic degradation in performance. (b The chance that the fingerprints have the same type from identical twins is 0.7440, comparing to 0.3215 from non-identical twins. (c For the corresponding fingers of identical twins which have same fingerprint type, the probability distribution of five major fingerprint types is similar to the probability distribution for all the fingers' fingerprint type. (d For each of four fingers of identical twins, the probability of having same fingerprint type is similar.

  3. Evaluation of Interhandle Distance During Pushing and Pulling of a Four-Caster Cart for Upper Limb Exertion.

    Science.gov (United States)

    Ohnishi, Akihiro; Takanokura, Masato; Sugama, Atsushi

    2016-09-01

    This study examined the relationship between interhandle distances and upper limb exertion during simply pushing and pulling of a cart with four swivel wheels, defined by a roll box pallet (RBP) in a Japanese industrial standard. Six healthy young male participants were asked to push and pull an RBP at a distance of 5.2 m under six conditions corresponding to different interhandle distances (40 cm, 60 cm, and 80 cm) and weights (130 kg and 250 kg). The upper limb exertion was studied by shoulder abduction and flexion, and elbow flexion, as well as surface electromyogram (EMG) in shoulder extensor, and elbow flexor and extensor. Participants were required to provide subjective evaluations on operability after each trial. Subjective operability indicated that a narrower interhandle distance had a better operability for pushing. Interhandle distance was also related to upper limb exertion especially for pushing. A narrow interhandle distance caused smaller shoulder adduction but larger elbow flexion. The normalized EMG data revealed that muscular activity became smaller with a narrow interhandle distance in shoulder extensor. During the pulling task, elbow flexion was smaller at a narrow interhandle distance, although subjective operability and normalized EMG were not significantly varied. A wider interhandle distance, such as 80 cm, was not suitable in the forwardbackward movement of the RBP. Therefore, this study concluded that an interhandle distance of 40 cm would be suitable for pushing and pulling an RBP to protect the workers' hands against the risk of injury by installing inner handles.

  4. Emergency separation of a xipho-omphalopagus twin in a ...

    African Journals Online (AJOL)

    Female conjoined twins (thoraco-omphalopagus) were delivered by emergency caesarean section in a private nursing home. On examination, one of the twins was dead and was threatening the survival of the surviving twin (twin A). An emergency separation was performed to salvage the surviving twin.

  5. Conjoined omphalopagus twins: a casereport

    Directory of Open Access Journals (Sweden)

    Sheila Yadira Gómez-Murillo

    2014-11-01

    Full Text Available Multiple pregnancies are 3% of the total. The most frequent are dizygotic females, however, a small group of them are of monozygotic conjoined twins in some anatomical area. This attracts the attention of physicians because of the rarity of the condition and the difficulties as well as the ethical dilemmas for their treatment. We report a case of male Siamese omphalopagus. They were separated surgically at seven weeks of age. One of them lived six months.

  6. Identical twins in forensic genetics

    DEFF Research Database (Denmark)

    Tvedebrink, Torben; Morling, Niels

    2015-01-01

    The increase in the number of forensic genetic loci used for identification purposes results in infinitesimal random match probabilities. These probabilities are computed under assumptions made for rather simple population genetic models. Often, the forensic expert reports likelihood ratios, where...... published results accounting for close familial relationships. However, we revisit the discussion to increase the awareness among forensic genetic practitioners and include new information on medical and societal factors to assess the risk of not considering a monozygotic twin as the true perpetrator...

  7. Ectodermal dysplasia in identical twins

    OpenAIRE

    Puttaraju, Gurkar Haraswarupa; Visveswariah, Paranjyothi Magadi

    2013-01-01

    Hereditary hypohidrotic ectodermal dysplasia (HED) is typically inherited as an X-linked recessive trait, characterized by deformity of at least two or more of the ectodermal structures - hair, teeth, nails and sweat glands. Two cases of hereditary HED involving identical male twins, is being documented for the rarity of its occurrence with special attention given to genetics, pathophysiology, clinical, intraoral manifestations and to the methods to improve the masticatory function, the facia...

  8. Twinning of Polymer Crystals Suppressed by Entropy

    Directory of Open Access Journals (Sweden)

    Nikos Ch. Karayiannis

    2014-09-01

    Full Text Available We propose an entropic argument as partial explanation of the observed scarcity of twinned structures in crystalline samples of synthetic organic polymeric materials. Polymeric molecules possess a much larger number of conformational degrees of freedom than low molecular weight substances. The preferred conformations of polymer chains in the bulk of a single crystal are often incompatible with the conformations imposed by the symmetry of a growth twin, both at the composition surfaces and in the twin axis. We calculate the differences in conformational entropy between chains in single crystals and chains in twinned crystals, and find that the reduction in chain conformational entropy in the twin is sufficient to make the single crystal the stable thermodynamic phase. The formation of cyclic twins in molecular dynamics simulations of chains of hard spheres must thus be attributed to kinetic factors. In more realistic polymers this entropic contribution to the free energy can be canceled or dominated by nonbonded and torsional energetics.

  9. A Powerful Twin Arrives

    Science.gov (United States)

    1999-11-01

    First Images from FORS2 at VLT KUEYEN on Paranal The first, major astronomical instrument to be installed at the ESO Very Large Telescope (VLT) was FORS1 ( FO cal R educer and S pectrograph) in September 1998. Immediately after being attached to the Cassegrain focus of the first 8.2-m Unit Telescope, ANTU , it produced a series of spectacular images, cf. ESO PR 14/98. Many important observations have since been made with this outstanding facility. Now FORS2 , its powerful twin, has been installed at the second VLT Unit Telescope, KUEYEN . It is the fourth major instrument at the VLT after FORS1 , ISAAC and UVES.. The FORS2 Commissioning Team that is busy installing and testing this large and complex instrument reports that "First Light" was successfully achieved already on October 29, 1999, only two days after FORS2 was first mounted at the Cassegrain focus. Since then, various observation modes have been carefully tested, including normal and high-resolution imaging, echelle and multi-object spectroscopy, as well as fast photometry with millisecond time resolution. A number of fine images were obtained during this work, some of which are made available with the present Press Release. The FORS instruments ESO PR Photo 40a/99 ESO PR Photo 40a/99 [Preview - JPEG: 400 x 345 pix - 203k] [Normal - JPEG: 800 x 689 pix - 563kb] [Full-Res - JPEG: 1280 x 1103 pix - 666kb] Caption to PR Photo 40a/99: This digital photo shows the twin instruments, FORS2 at KUEYEN (in the foreground) and FORS1 at ANTU, seen in the background through the open ventilation doors in the two telescope enclosures. Although they look alike, the two instruments have specific functions, as described in the text. FORS1 and FORS2 are the products of one of the most thorough and advanced technological studies ever made of a ground-based astronomical instrument. They have been specifically designed to investigate the faintest and most remote objects in the universe. They are "multi-mode instruments" that

  10. How rolling forecasting facilitates dynamic, agile planning.

    Science.gov (United States)

    Miller, Debra; Allen, Michael; Schnittger, Stephanie; Hackman, Theresa

    2013-11-01

    Rolling forecasting may be used to replace or supplement the annual budget process. The rolling forecast typically builds on the organization's strategic financial plan, focusing on the first three years of plan projections and comparing the strategic financial plan assumptions with the organization's expected trajectory. Leaders can then identify and respond to gaps between the rolling forecast and the strategic financial plan on an ongoing basis.

  11. Corpuscular slow-roll inflation

    Science.gov (United States)

    Casadio, Roberto; Giugno, Andrea; Giusti, Andrea

    2018-01-01

    We show that a corpuscular description of gravity can lead to an inflationary scenario similar to Starobinsky's model without requiring the introduction of the inflaton field. All relevant properties are determined by the number of gravitons in the cosmological condensate or, equivalently, by their Compton length. In particular, the relation between the Hubble parameter H and its time derivative H ˙ required by cosmic microwave background observations at the end of inflation, as well as the (minimum) initial value of the slow-roll parameter, are naturally obtained from the Compton size of the condensate.

  12. Evolution equations of deformation twins in metals-Evolution of deformation twins in pure titanium

    International Nuclear Information System (INIS)

    Cai Shengqiang; Li Ziran; Xia Yuanming

    2008-01-01

    The evolution equations of the volume fractions of deformation twins are obtained in this article by using the theory of inclusions in micromechanics and analyzing the Gibbs free energy and dissipation of a system. The evolution process of the volume fractions of twins is got by using the Runge-Kutta method in this article. The computational results of the evolution equations (the critical twinning stress and the families of twins appeared under different loading conditions) are consistent with the experiment results

  13. Spray Rolling Aluminum Strip for Transportation Applications

    Energy Technology Data Exchange (ETDEWEB)

    Kevin M. McHugh; Y. Lin; Y. Zhou; E. J. Lavernia; J.-P. Delplanque; S. B. Johnson

    2005-02-01

    Spray rolling is a novel strip casting technology in which molten aluminum alloy is atomized and deposited into the roll gap of mill rolls to produce aluminum strip. A combined experimental/modeling approach has been followed in developing this technology with active participation from industry. The feasibility of this technology has been demonstrated at the laboratory scale and it is currently being scaled-up. This paper provides an overview of the process and compares the microstructure and properties of spray-rolled 2124 aluminum alloy with commercial ingot-processed material

  14. Radiometric study of creep in ingot rolling

    International Nuclear Information System (INIS)

    Kubicek, P.; Zamyslovsky, Z.; Uherek, J.

    The radiometric study of creep during ingot rolling performed in the rolling mill of the Vitkovice Iron and Steel Works and the first results are described. Selected sites in 3 to 8 ton ingots were labelled with 2 to 3.7x10 5 Bq of 60 Co and after rolling into blocks, the transposition of the labelled sites of the ingots was investigated. The results indicate creep during rolling, local extension in certain sites under study and help to determine the inevitable bottom crop incurred in the forming. Finally, the requirements put on the radiometric apparatus for the next stages of technological research are presented. (author)

  15. METHOD OF HOT ROLLING URANIUM METAL

    Science.gov (United States)

    Kaufmann, A.R.

    1959-03-10

    A method is given for quickly and efficiently hot rolling uranium metal in the upper part of the alpha phase temperature region to obtain sound bars and sheets possessing a good surface finish. The uranium metal billet is heated to a temperature in the range of 1000 deg F to 1220 deg F by immersion iii a molten lead bath. The heated billet is then passed through the rolls. The temperature is restored to the desired range between successive passes through the rolls, and the rolls are turned down approximately 0.050 inch between successive passes.

  16. Exotic quarks in Twin Higgs models

    Science.gov (United States)

    Cheng, Hsin-Chia; Jung, Sunghoon; Salvioni, Ennio; Tsai, Yuhsin

    2016-03-01

    The Twin Higgs model provides a natural theory for the electroweak symmetry breaking without the need of new particles carrying the standard model gauge charges below a few TeV. In the low energy theory, the only probe comes from the mixing of the Higgs fields in the standard model and twin sectors. However, an ultraviolet completion is required below ˜ 10 TeV to remove residual logarithmic divergences. In non-supersymmetric completions, new exotic fermions charged under both the standard model and twin gauge symmetries have to be present to accompany the top quark, thus providing a high energy probe of the model. Some of them carry standard model color, and may therefore be copiously produced at current or future hadron colliders. Once produced, these exotic quarks can decay into a top together with twin sector particles. If the twin sector particles escape the detection, we have the irreducible stop-like signals. On the other hand, some twin sector particles may decay back into the standard model particles with long lifetimes, giving spectacular displaced vertex signals in combination with the prompt top quarks. This happens in the Fraternal Twin Higgs scenario with typical parameters, and sometimes is even necessary for cosmological reasons. We study the potential displaced vertex signals from the decays of the twin bottomonia, twin glueballs, and twin leptons in the Fraternal Twin Higgs scenario. Depending on the details of the twin sector, the exotic quarks may be probed up to ˜ 2.5TeV at the LHC and beyond 10TeV at a future 100TeV collider, providing a strong test of this class of ultraviolet completions.

  17. Anaesthesia for the separation of conjoined twins

    Directory of Open Access Journals (Sweden)

    Jaya Lalwani

    2011-01-01

    Full Text Available Thoraco-omphalopagus is one of the most common type of conjoint twins accounting for 74% cases of conjoint twins. We report the anaesthetic management for successful separation of thoraco-omphalopagus conjoint twins, both of them surviving till date. We highlight the responsibility of anaesthesia team in anaesthetising the two individual patients simultaneously, need of careful monitoring and anticipation of complications like massive blood loss, hypotension, hypokalemia, hypoxia and hypercabia. Detailed description of successful management is reported.

  18. Dynamics of twin boundaries in martensites

    Energy Technology Data Exchange (ETDEWEB)

    Barsch, G.R.; Horovitz, B.; Krumhansl, J.A.

    1987-09-14

    The theory of forming a coherent twinning array in a parent phase is studied for a tetragonal to orthorhombic displacive transition. We find that this structure can be stabilized without the use of dislocations by a long-range interaction between the twin boundaries which is mediated via the parent phase. The dynamics of the twin boundary lattice consists of elementary excitations with surprisingly low frequency and a limiting -- (wave vector)/sup 1/2/ dispersion.

  19. Twinning and Fracturing During Cataclasis in Carbonate Fault Gouge

    Science.gov (United States)

    Demurtas, M.; Smith, S. A. F.; Spagnuolo, E.; Negrini, M.; Fondriest, M.; Di Toro, G.

    2016-12-01

    Gouges and cataclasites are a common product of faulting in the brittle upper crust. Natural fault gouges often contain minerals with strong anisotropies, such as cleavage in phyllosilicates and twinning in carbonates. A proper understanding of the role of such anisotropies during shearing is important to develop realistic microphysical models of brittle fragmentation and grain size reduction. Here we present initial results of microstructural and coupled EDS-EBSD analysis on mixtures (50/50wt%) of calcite-dolomite gouges deformed experimentally in a rotary shear apparatus (SHIVA, INGV-Rome) under constant normal stress of 17.5 MPa and slip rates of 30 µm/s to 1 m/s. Simultaneous collection of EDS and EBSD data allowed twin and phase identification (calcite and dolomite) at spatial scales approaching 1 µm. A new workflow was implemented in MTEX allowing EDS-EBSD data to be cleaned and post-processed to correctly index calcite and dolomite in >95% of cases. At all investigated slip velocities, twins in calcite grains are mainly oriented in a direction consistent with the imposed shear sense. Microfractures are closely spaced and mainly oriented along synthetic R'-type shear planes. Only in a few cases were microfractures observed to exploit calcite twin planes. Fracturing results in elongate clast shapes (in 2D) and quantitative image analysis shows the development of two clast-shape preferred orientations: 1) clasts with long-axes subparallel to the principal R'-type fracture set, and 2) clasts with long axes subperpendicular to the principal R'-type fracture set. This may be explained by systematic fracturing of clasts along R'- planes and subsequent rotation of the newly formed, elongate grains in to a "stable" orientation during cataclastic flow. Fracturing, followed by the formation and rolling of elongate clasts would promote dilation during cataclasis and a progressive change in the frictional properties of the carbonate gouge. Incorporating these

  20. Higher Incidence of Hypospadias in Monochorionic Twins.

    Science.gov (United States)

    Visser, Remco; Burger, Nienke C M; van Zwet, Erik W; Hilhorst-Hofstee, Yvonne; Haak, Monique C; van den Hoek, Joop; Oepkes, Dick; Lopriore, Enrico

    2015-10-01

    Hypospadias is associated with twinning. The incidence of hypospadias in monochorionic and dichorionic male twins is, however, yet to be determined. All medical records of monochorionic and dichorionic twins admitted to our neonatal nursery between January 2004 and August 2013 were reviewed for the presence of hypospadias. A total of 350 monochorionic and 303 dichorionic male twins were included in the study. The incidence of hypospadias in monochorionic and dichorionic groups was 4% (14/350) and 1% (3/303) (p = .016) respectively. In 11 of the 15 twin couples, hypospadias occurred in the twin with the lowest birth weight. The rate of hypospadias in twin infants small-for-gestational-age group was 10% (6/60) compared with 2% (11/593) in the appropriate-for-gestational-age group (p = .002). In a multivariate analysis, both monochorionicity and small-for-gestational-age were independently associated with hypospadias, odds ratio 4.1 (95% confidence interval (CI): 1.1-14.7) and 6.1 (95% CI: 2.2-17.2) respectively. The incidence of hypospadias is four-fold higher in monochorionic twins compared with dichorionic twins. Hypospadias is also independently associated with small-for-gestational-age.

  1. Myocardial hypertrophy in the recipient with twin-to-twin transfusion syndrome

    DEFF Research Database (Denmark)

    Jeppesen, D.L.; Jorgensen, F.S.; Pryds, O.A.

    2008-01-01

    In a set of monochorionic-diamniotic twins with twin-to-twin transfusion syndrome, systemic hypertension and biventricular myocardial hypertrophy were found in the recipient. The infant developed mild respiratory distress. A partial exchange transfusion was performed because of polycytaemia. Blood...

  2. Rapid onset of severe twin-twin transfusion syndrome caused by placental venous thrombosis

    NARCIS (Netherlands)

    Nikkels, PGJ; van Gemert, MJC; Sollie-Szarynska, KM; Molendijk, H; Timmer, B; Machin, GA

    2002-01-01

    We report a case of rapid onset of severe twin-twin transfusion syndrome (TTTS) at 25 weeks gestation in a monochorionic twin pregnancy that was uneventful before that time. Thrombosis of a main venous branch draining several arteriovenous (AV) anastomoses to the donor changed the previous

  3. 21 CFR 136.110 - Bread, rolls, and buns.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bread, rolls, and buns. 136.110 Section 136.110... Bread, rolls, and buns. (a) Bread, white bread, and rolls, white rolls, or buns, and white buns are the... be additional optional ingredients in the bread, rolls, or buns. All ingredients in any flour...

  4. Rolling into spatial disorientation: Simulator demonstration of the post-roll (Gillingham) illusion

    NARCIS (Netherlands)

    Nooij, S.A.E.; Groen, E.L.

    2011-01-01

    Introduction: Spatial disorientation (SD) is still a contributing factor in many aviation accidents, stressing the need for adequate SD training scenarios. In this article we focused on the post-roll effect (the sensation of rolling back after a roll maneuver, such as an entry of a coordinated turn)

  5. Problem in twin pregnancy: Findings of prenatal sonography and autopsy

    International Nuclear Information System (INIS)

    Kim, Jeong Ah; Cho, Jeong Yeon; Song, Mi Jin; Min, Jee Yeon; Lee, Young Ho; Lee, Hak Jong; Chun, Yi Kyeong; Kim, Yee Jeong; Hong, Sung Ran

    2001-01-01

    Multifetal gestations are high risk pregnancies with higher perinatal morbidity and mortality. Multifetal gestations are subject to unique complications including conjoined twins, twin-to-twin transfusion syndrome (TTTS), acardiac twins, twin embization of co-twin demise and heterotopic pregnancies. Prenatal sonographic diagnosis of types and complications of multifetal gestations is important for antenatal care and prediction of fetal outcome. This study was performed to present the prenatal ultrasonographic findings and pathologic findings of the unique complications of twin pregnancy. Acardia is a lethal anomaly occurring in 1% of monozygotic twin. The acardiac twin has a parasitic existence and depends on the donor (pump) twin for its blood supply via placental anastomoses and retrograde perfusion of umbilical cord. This twin reversed arterial perfusion (TRAP) sequence is a most extreme manifestation on the TTTS. Doppler verification reversed flow in umbilical cord of the acardiac twin confirms the diagnosis.

  6. 75 FR 62566 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-10-12

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 701-TA-384 and 731-TA-806-808 (Second Review)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... countervailing duty order on hot-rolled flat-rolled carbon-quality steel products (``hot-rolled steel'') from...

  7. 75 FR 16504 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2010-04-01

    ...)] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia AGENCY: United... countervailing duty order on certain hot-rolled flat-rolled carbon-quality steel products (``hot-rolled steel... are Brazil, Japan, and Russia. (3) The Domestic Like Product is the domestically produced product or...

  8. Annealing effects on the microstructure and mechanical properties of hot-rolled 14Cr-ODS steel

    International Nuclear Information System (INIS)

    Gao, R.; Zhang, T.; Ding, H.L.; Jiang, Y.; Wang, X.P.; Fang, Q.F.; Liu, C.S.

    2015-01-01

    The oxide dispersion strengthened ferritic steels with nominal composition (weight percent) of Fe–14Cr–2W-0.5Ti-0.06Si-0.2V-0.1Mn-0.05Ta-0.03C-0.3Y 2 O 3 were fabricated by sol–gel method, mechanical alloying, and hot isostatic pressing techniques. The evolution of microstructure and mechanical properties of the hot-rolled specimens with heat treatment was investigated. Tensile strength and hardness of hot-rolled ODS steel are significantly enhanced due to the formation of mechanical twins and high density dislocations. Uniformly dispersed oxide particles (10–40 nm) and fine-grained structure (200–400 nm) are responsible for the superior mechanical properties of the hot-rolled specimen annealed between 650 °C and 850 °C. With further increasing annealing temperature, the grain size of the hot-rolled specimens increases while the size of oxide particles decreases, which leads to lower strength and hardness but better ductility. The tensile strength and total elongation of samples in the rolling direction are higher than those in the transverse direction after the same treatments owing to the grain anisotropy induced by the large mechanical deformation.

  9. Pipe Rolling from Continuous Cast Metal

    International Nuclear Information System (INIS)

    Zhordania, I.; Chkhartishvili, I.; Lordkipanidze, J.; Melashvili, Z.; Papava, K.; Khundadze, K.

    2007-01-01

    The approach to manufacturing of high quality pipes as a result of solid and hollow billet rolling from continuous cast metal is shown. Optimal parameters of piercing, temperature of piercing and piercing rolling mill rollers speed have been experimentally established. (author)

  10. Contact fatigue in rolling-element bearings

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1997-06-01

    Full Text Available Surface contact fatigue is a common cause of failure in rolling-element bearings. The extent of damage observed depends on the contact loads, the curvature of the rolling elements, and the relative motion between the contacting surfaces...

  11. Computer-aided design of rolling mills

    Indian Academy of Sciences (India)

    In the design of rolling mills equipment, computer-aided design has been widely used. The available software, which covers both steady state and dynamic analysis of items such as mill stands, drive systems, manipulators, cooling beds, roll cooling, and automatic gauge control systems, is reviewed with special reference to ...

  12. CRITICAL WAVE EPISODES FOR ASSESSMENT OF ROLL

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Pedersen, Preben Terndrup

    2006-01-01

    The statistical distribution of parametric induced roll angles is estimated using the first order reliability method (FORM), well-known from structural reliability problems. To illustrate the proposed procedure the roll motion is modeled by a simplified non-linear procedure taking into account...

  13. Twin-Foucault imaging method

    Science.gov (United States)

    Harada, Ken

    2012-02-01

    A method of Lorentz electron microscopy, which enables observation two Foucault images simultaneously by using an electron biprism instead of an objective aperture, was developed. The electron biprism is installed between two electron beams deflected by 180° magnetic domains. Potential applied to the biprism deflects the two electron beams further, and two Foucault images with reversed contrast are then obtained in one visual field. The twin Foucault images are able to extract the magnetic domain structures and to reconstruct an ordinary electron micrograph. The developed Foucault method was demonstrated with a 180° domain structure of manganite La0.825Sr0.175MnO3.

  14. Twin Studies of Atopic Dermatitis

    DEFF Research Database (Denmark)

    Elmose, Camilla; Thomsen, Simon Francis

    2015-01-01

    about filaggrin and its role in the atopic march and provide suggestions for future research in this area. Methods. We identified all twin studies (published after 1970) that have calculated the concordance rate and/or the heritability of AD, or the genetic and environmental correlations between AD...... was around 85% explained by genetic pleiotropy. Conclusions. Genetic factors account for most of the variability in AD susceptibility and for the association between AD and asthma. Controversy remains as to whether the atopic diseases are causally related or whether they are diverse clinical manifestations...

  15. Ectodermal dysplasia in identical twins

    Directory of Open Access Journals (Sweden)

    Gurkar Haraswarupa Puttaraju

    2013-01-01

    Full Text Available Hereditary hypohidrotic ectodermal dysplasia (HED is typically inherited as an X-linked recessive trait, characterized by deformity of at least two or more of the ectodermal structures - hair, teeth, nails and sweat glands. Two cases of hereditary HED involving identical male twins, is being documented for the rarity of its occurrence with special attention given to genetics, pathophysiology, clinical, intraoral manifestations and to the methods to improve the masticatory function, the facial esthetics and psychology of patients affected by this disease.

  16. Haemodynamic resistance model of monochorionic twin pregnancies complicated by acardiac twinning

    Energy Technology Data Exchange (ETDEWEB)

    Umur, Asli [Laser Center and Department of Obstetrics and Gynecology, Academic Medical Center, University of Amsterdam, Amsterdam(Netherlands); Gemert, Martin J C van [Laser Center and Department of Obstetrics and Gynecology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands); Wijngaard, Jeroen P H M van den [Laser Center and Department of Obstetrics and Gynecology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands); Ross, Michael G [Department of Obstetrics and Gynecology, Harbor University of California-Los Angeles Medical Center, Torrence, CA 9050 (United States); Nikkels, Peter G J [Department of Pathology, University Medical Center, Utrecht (Netherlands)

    2004-07-21

    An acardiac twin is a severely malformed monochorionic twin fetus that lacks most organs, particularly a heart. It grows during pregnancy, because it is perfused by its developmentally normal co-twin (called the pump twin) via a set of placental arterioarterial and venovenous anastomoses. The pump twin dies intrauterine or neonatally in about 50% of the cases due to congestive heart failure, polyhydramnios and prematurity. Because the pathophysiology of this pregnancy is currently incompletely understood, we modified our previous haemodynamic model of monochorionic twins connected by placental vascular anastomoses to include the analysis of acardiac twin pregnancies. We incorporated the fetoplacental circulation as a resistance circuit and used the fetal umbilical flow that perfuses the body to define fetal growth, rather than the placental flow as done previously. Using this modified model, we predicted that the pump twin has excess blood volume and increased mean arterial blood pressure compared to those in the acardiac twin. Placental perfusion of the acardiac twin is significantly reduced compared to normal, as a consequence of an increased venous pressure, possibly implying reduced acardiac placental growth. In conclusion, the haemodynamic analysis may contribute to an increased knowledge of the pathophysiologic consequences of an acardiac body mass for the pump twin. (note)

  17. NOTE: Haemodynamic resistance model of monochorionic twin pregnancies complicated by acardiac twinning

    Science.gov (United States)

    Umur, Asli; van Gemert, Martin J. C.; van den Wijngaard, Jeroen P. H. M.; Ross, Michael G.; Nikkels, Peter G. J.

    2004-07-01

    An acardiac twin is a severely malformed monochorionic twin fetus that lacks most organs, particularly a heart. It grows during pregnancy, because it is perfused by its developmentally normal co-twin (called the pump twin) via a set of placental arterioarterial and venovenous anastomoses. The pump twin dies intrauterine or neonatally in about 50% of the cases due to congestive heart failure, polyhydramnios and prematurity. Because the pathophysiology of this pregnancy is currently incompletely understood, we modified our previous haemodynamic model of monochorionic twins connected by placental vascular anastomoses to include the analysis of acardiac twin pregnancies. We incorporated the fetoplacental circulation as a resistance circuit and used the fetal umbilical flow that perfuses the body to define fetal growth, rather than the placental flow as done previously. Using this modified model, we predicted that the pump twin has excess blood volume and increased mean arterial blood pressure compared to those in the acardiac twin. Placental perfusion of the acardiac twin is significantly reduced compared to normal, as a consequence of an increased venous pressure, possibly implying reduced acardiac placental growth. In conclusion, the haemodynamic analysis may contribute to an increased knowledge of the pathophysiologic consequences of an acardiac body mass for the pump twin.

  18. Analytical method for establishing indentation rolling resistance

    Science.gov (United States)

    Gładysiewicz, Lech; Konieczna, Martyna

    2018-01-01

    Belt conveyors are highly reliable machines able to work in special operating conditions. Harsh environment, long distance of transporting and great mass of transported martials are cause of high energy usage. That is why research in the field of belt conveyor transportation nowadays focuses on reducing the power consumption without lowering their efficiency. In this paper, previous methods for testing rolling resistance are described, and new method designed by authors was presented. New method of testing rolling resistance is quite simple and inexpensive. Moreover it allows to conduct the experimental tests of the impact of different parameters on the value of indentation rolling resistance such as core design, cover thickness, ambient temperature, idler travel frequency, or load value as well. Finally results of tests of relationship between rolling resistance and idler travel frequency and between rolling resistance and idler travel speed was presented.

  19. Finite Element Modeling of Strain Distribution through Sheet Thickness during Cold Rolling with Grooved Rolls

    Directory of Open Access Journals (Sweden)

    Pesin A.

    2015-01-01

    Full Text Available Plastic strain control of aluminum alloys are of importance for improvement of sheet microstructure and properties. The paper presents a numerical analysis of the strain distribution through pure Al sheet thickness during cold rolling with flat and grooved rolls. FEM simulations were carried out with using software DEFORM 3D. For verification of the numeric modeling results, the experimental analysis was carried out. The influence of the roll shape on strain distribution through Al sheet thickness was studied. It was shown that the strain effective increases from 0.9 to 1.5 during cold rolling with grooved rolls, when depth of indentation of grooved rolls in sheet increases from 0.25 to 0.50 mm. FE model can be used to optimize the cold rolling process to improve microstructure and mechanical properties of aluminum sheets.

  20. The effect of roll gap geometry on microstructure in cold-rolled aluminum

    DEFF Research Database (Denmark)

    Mishin, Oleg; Bay, B.; Winther, G.

    2004-01-01

    Microstructure and texture are analyzed through the thickness of two aluminum plates cold-rolled 40% with different roll gap geometries. It is found that both texture and microstructure are strongly affected by the rolling geometry. After rolling with intermediate-size draughts a rolling...... layers. In these layers, extended planar dislocation boundaries are frequently found to be inclined closely to the rolling direction. The subsurface and central layers of this plate exhibit microstructures similar to those in the plate rolled with intermediate draughts. It is suggested...... that the development of different textures and microstructures at different depths is related to the activation of different slip systems due to through-thickness strain gradients....

  1. Cord entanglement in monoamniotic twin pregnancies

    DEFF Research Database (Denmark)

    Lyndrup, J; Schouenborg, Lars Øland

    1987-01-01

    Monoamniotic twin pregnancy involves a heavy risk of fatal umbilical cord entanglement. Two cases are reported. In the first case, both twins were found dead in the 36th week, and the monoamnionicity was recognized at birth. In the second case, the monoamnionicity was discovered during...

  2. Fetal behavior in normal dichorionic twin pregnancy

    NARCIS (Netherlands)

    Mulder, E. J. H.; Derks, J. B.; de Laat, M. W. M.; Visser, G. H. A.

    2012-01-01

    Objectives: A prospective study was performed to compare fetal behavioral development in healthy dichorionic twins and singletons, and identify twin intra-pair associations (synchrony) of fetal movements and rest-activity cycles using different criteria to define synchrony. Subjects and methods:

  3. 49 CFR 372.221 - Twin Cities.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Twin Cities. 372.221 Section 372.221... ZONES, AND TERMINAL AREAS Commercial Zones § 372.221 Twin Cities. For the purpose of determining... following combinations of cities shall be considered as a single municipality: (a) Having a population equal...

  4. Utilizing twins as controls for non-twin case-materials in genome wide association studies.

    Directory of Open Access Journals (Sweden)

    Andrea Ganna

    Full Text Available Twin registries around the globe have collected DNA samples from large numbers of monozygotic and dizygotic twins. The twin sample collections are frequently used as controls in disease-specific studies together with non-twins. This approach is unbiased under the hypothesis that twins and singletons are comparable in terms of allele frequencies; i.e. there are no genetic variants associated with being a twin per se. To test this hypothesis we performed a genome-wide association study comparing the allele frequency of 572,352 single nucleotide polymorphisms (SNPs in 1,413 monozygotic (MZ and 5,451 dizygotic (DZ twins with 3,720 healthy singletons. Twins and singletons have been genotyped using the same platform. SNPs showing association with being a twin at P-value < 1 × 10(-5 were selected for replication analysis in 1,492 twins (463 MZ and 1,029 DZ and 1,880 singletons from Finland. No SNPs reached genome-wide significance (P-value < 5 × 10(-8 in the main analysis combining MZ and DZ twins. In a secondary analysis including only DZ twins two SNPs (rs2033541 close to ADAMTSL1 and rs4149283 close to ABCA1 were genome-wide significant after meta-analysis with the Finnish population. The estimated proportion of variance on the liability scale explained by all SNPs was 0.08 (P-value=0.003 when MZ and DZ were considered together and smaller for MZ (0.06, P-value=0.10 compared to DZ (0.09, P-value=0.003 when analyzed separately. In conclusion, twins and singletons can be used in genetic studies together with general population samples without introducing large bias. Further research is needed to explore genetic variances associated with DZ twinning.

  5. Twins in Ancient Greece: a synopsis.

    Science.gov (United States)

    Malamitsi-Puchner, Ariadne

    2016-01-01

    This brief outline associates twins with several aspects of life in Ancient Greece. In Greek mythology twins caused ambivalent reactions and were believed to have ambivalent feelings for each other. Very often, they were viewed as the representatives of the dualistic nature of the universe. Heteropaternal superfecundation, which dominates in ancient myths, explains on one hand, the god-like qualities and, on the other hand, the mortal nature of many twins. An assumption is presented that legends referring to twins might reflect the territorial expansions of Ancient Greeks in Northern Mediterranean, around the Black Sea, in Asia Minor, as well as North East Africa. In conclusion, in Greek antiquity, twins have been used as transitional figures between myth and reality.

  6. Urticaria in monozygotic and dizygotic twins

    DEFF Research Database (Denmark)

    Thomsen, Simon Francis; van der Sluis, Sophie; Kyvik, Kirsten Ohm

    2012-01-01

    Aim. To identify risk factors for urticaria, to determine the relative proportion of the susceptibility to urticaria that is due to genetic factors in an adult clinical twin sample, and to further determine whether the genetic susceptibility to urticaria overlaps with the genetic susceptibility...... to atopic diseases. Methods. A total of 256 complete twin pairs and 63 single twins, who were selected from sibships with self-reported asthma via a questionnaire survey of 21,162 adult twins from the Danish Twin Registry, were clinically interviewed about a history of urticaria and examined for atopic...... diseases. Data were analysed with Cox proportional hazards regression and variance components models. Results. A total of 151 individuals (26%) had a history of urticaria, whereas 24 (4%) had had symptoms within the past year. Female sex, HR = 2.09 (1.46-2.99), P = 0.000; hay fever, HR = 1.92 (1...

  7. Shock-induced deformation twinning in tantalum

    International Nuclear Information System (INIS)

    Murr, L.E.; Niou, C.S.; Pappu, S.; Kennedy, C.; Meyers, M.A.; Chen, Y.J.

    1997-01-01

    Shock-wave deformation of tantalum to a pressure of 45 GPa and duration of 1.8 micros generates profuse twinning. The post-shock mechanical response is significantly affected, with shock hardening exceeding the expected hardening due to the transient shock strain ε s = (4/3)ln(V/V 0 ); this enhanced hardening, and other alterations in response, are attributed to the barriers presented to plastic deformation by the deformation twins. A constitutive model is proposed that predicts the threshold shock stress for mechanical twinning; it is based on the application of the Swegle-Grady relationship between shock stress and strain rate to constitute equations describing the critical stress for slip and twinning. This constitutive model incorporates grain-size effects and predicts a threshold twinning stress that is a function of temperature and grain size; predictions of the model are in qualitative agreement with experimental results

  8. 'Biracial'-Looking Twins: A New Twin Type?/Twin Research: Twins with Cystic Teratomas; Sleep Quality and Body Mass Index; Previable Membrane Rupture/Print and Online Reports: Twins Born to a Sister Surrogate; NASA Twin Study; African-Cosmopolitan Twin Fashion Inspirations; Triplet Hockey Stars.

    Science.gov (United States)

    Segal, Nancy L

    2017-06-01

    Dizygotic (DZ) co-twins born to mothers and fathers from different racial or ethnic backgrounds often resemble one parent much more than the other. As such, these pairs comprise a unique subset of twins for investigating how others' responses to their different looks may affect their personalities and self-esteem. This article describes some of these twin pairs and some challenges of raising them, and suggests ways they may be used in research. Next, recent twin research on cystic teratomas, relations between sleep quality and body mass index, and previable membrane rupture is described. The final section concerns twins, twin studies, and related events in the media, namely: twins born to a sister surrogate, the NASA twin investigation, inspiring African-Cosmopolitan twins in fashion, and triplet Hockey Stars.

  9. Highlights from the 15th International Congress of Twin Studies/Twin Research: Differentiating MZ Co-twins Via SNPs; Mistaken Infant Twin-Singleton Hospital Registration; Narcolepsy With Cataplexy; Hearing Loss and Language Learning/Media Mentions: Broadway Musical Recalls Conjoined Hilton Twins; High Fashion Pair; Twins Turn 102; Insights From a Conjoined Twin Survivor.

    Science.gov (United States)

    Segal, Nancy L

    2015-02-01

    Highlights from the 15th International Congress of Twin Studies are presented. The congress was held November 16-19, 2014 in Budapest, Hungary. This report is followed by summaries of research addressing the differentiation of MZ co-twins by single nucleotide polymorphisms (SNPs), an unusual error in infant twin-singleton hospital registration, twins with childhood-onset narcolepsy with cataplexy, and the parenting effects of hearing loss in one co-twin. Media interest in twins covers a new Broadway musical based on the conjoined twins Violet and Daisy Hilton, male twins becoming famous in fashion, twins who turned 102 and unique insights from a conjoined twin survivor. This article is dedicated to the memory of Elizabeth (Liz) Hamel, DZA twin who met her co-twin for the first time at age seventy-eight years. Liz and her co-twin, Ann Hunt, are listed in the 2015 Guinness Book of Records as the longest separated twins in the world.

  10. Properties, microstructure and texture evolution of cold rolled Cu strips under electropulsing treatment

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, R.F.; Liu, J.N. [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Tang, G.Y., E-mail: tanggy@mail.tsinghua.edu.cn [Advanced Materials Institute, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Key Laboratory for Advanced Materials of Ministry of Education, Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Shi, S.Q.; Fu, M.W. [Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Electropulsing treatment affects the properties and microstructures of Cu strips. Black-Right-Pointing-Pointer The frequency of twin reaches the maximum at 400 Hz. Black-Right-Pointing-Pointer Electropulsing treatment strengthens P{l_brace}0 1 1{r_brace}<1 2 2{sup Macron }> orientation. - Abstract: The effect of electropulsing treatment (EPT) on properties, microstructures and texture of the cold-rolled Cu strips is investigated by electron back scattered diffraction (EBSD). The results show that the elongation of Cu strips increases while the Vickers hardness and electrical resistivity drop with the increase of the frequency of electropulsing excluding 600 Hz. The grain size increased with increasing the frequency of electropulsing. The frequency of coincident site lattice (CSL) and twin reach the maximum using the EPT of 400 Hz. In addition, the change of microstructure induced by EPT strengthens P{l_brace}0 1 1{r_brace}<1 2 2{sup Macron }> orientation and weakens S{l_brace}1 2 3{r_brace}<6 3 4{sup Macron }> and Bs{l_brace}1 1 0{r_brace}<1 1{sup Macron} 2> texture component content. The twin formation and crystallization mechanism of the cold deformed Cu under electropulsing are proposed.

  11. Modelling the influence of amnionicity on the severity of twin-twin transfusion syndrome in monochorionic twin pregnancies

    International Nuclear Information System (INIS)

    Wijngaard, Jeroen P H M van den; Umur, Asli; Ross, Michael G; Gemert, Martin J C van

    2004-01-01

    Clinical treatment for diamniotic-monochorionic twin-twin transfusion syndrome (TTTS) may include conversion of diamniotic pregnancies to a monoamniotic-monochorionic state by disrupting the amnion septum. We sought to test the underlying hypothesis, i.e. that a monoamniotic state reduces the severity of TTTS. With use of our previously developed mathematical model of two equal fetoplacental circulatory units connected by various sizes and types of placental anastomoses, we compared the haemodynamic and amniotic fluid dynamics of monoamniotic and diamniotic twins that develop TTTS. We used three anastomotic patterns that produce severe, moderate or mild forms of TTTS, respectively, in our diamniotic-monochorionic twin model. Monoamnionicity was modelled by adding the two amniotic fluid volumes and using the volume-averaged amniotic fluid osmolality. The results were as follows: for severe TTTS, small differences develop between diamniotic and monoamniotic donor twins in fetal urine production, swallowed volume, blood volume, blood pressures, net fetofetal transfusion, and blood and amniotic fluid osmolality. However, the circulatory imbalance between the monoamniotic twins deteriorates similar to that of diamniotic twins. The pathophysiological differences tend to disappear for milder TTTS. In conclusion, our model suggests that the uncommon finding of TTTS in monoamniotic twins is not due to the presence of a single amniotic sac. Rather, clinically significant differences in anastomotic patterns and the delayed or lack of identification of manifestations in monoamniotic twins account for the reduced rate of TTTS diagnosis. Based on these results we expect the clinical disruption of the amnion septum in diamniotic-monochorionic TTTS pregnancies to have only minimal benefits. (note)

  12. Design and analysis of roll cage

    Science.gov (United States)

    Angadi, Gurusangappa; Chetan, S.

    2018-04-01

    Wildlife fire fighting vehicles are used to extinguish fires in forests, in this process vehicles face falling objects like rocks, tree branches and other objects. Also due to uneven conditions of the terrain like cliff edges, uneven surfaces etc. makes the vehicle to roll over and these can cause injuries to both the driver and the operator. Roll over of a vehicle is a common incident which makes fatal injuries to the operator and also stands next to the crash accidents. In order to reduce the injury level and continuous roll over of the vehicle it is necessary to equip suitable roll cage according to standards of vehicle. In this present work roll cage for pump operator in wildfire fighting vehicle is designed and analysis is carried out in computer simulated environment when seating position of operator seated outside of the cabin. According to NFPA 1906 standards wildlife fire apparatus, Design and Test procedures that are carried out in Hyperworks maintaining SAE J1194.1983 standards. G load case, roof crush analysis and pendulum impact analysis tests are carried out on roll cage to ensure the saftey of design. These load cases are considerd to satisfy the situation faced in forest terrain. In these test procedures roll cage is analysed for stresses and deformation in various load cases. After recording results these are compared with standards mentioned in SAE J1194.1983.

  13. Ground roll attenuation by synchrosqueezed curvelet transform

    Science.gov (United States)

    Liu, Zhao; Chen, Yangkang; Ma, Jianwei

    2018-04-01

    Ground roll is a type of coherent noise in land seismic data that has low frequency, low velocity and high amplitude. It damages reflection events that contain important information about subsurface structures, hence the removal of ground roll is a crucial step in seismic data processing. A suitable transform is needed for removal of ground roll. Curvelet transform is an effective sparse transform that optimally represents seismic events. In addition, the curvelets can provide a multiscale and multidirectional decomposition of the input data in time-frequency and angular domain, which can help distinguish between ground roll and useful signals. In this paper, we apply synchrosqueezed curvelet transform (SSCT) for ground roll attenuation. The synchrosqueezing technique in SSCT is used to precisely reallocate the energy of local wave vectors in order to separate ground roll from the original data with higher resolution and higher fidelity. Examples of synthetic and field seismic data reveal that SSCT performs well in the suppression of aliased and non-aliased ground roll while preserving reflection waves, in comparison with high-pass filtering, wavelet and curvelet methods.

  14. The utility of twins in developmental cognitive neuroscience research: How twins strengthen the ABCD research design.

    Science.gov (United States)

    Iacono, William G; Heath, Andrew C; Hewitt, John K; Neale, Michael C; Banich, Marie T; Luciana, Monica M; Madden, Pamela A; Barch, Deanna M; Bjork, James M

    2017-09-12

    The ABCD twin study will elucidate the genetic and environmental contributions to a wide range of mental and physical health outcomes in children, including substance use, brain and behavioral development, and their interrelationship. Comparisons within and between monozygotic and dizygotic twin pairs, further powered by multiple assessments, provide information about genetic and environmental contributions to developmental associations, and enable stronger tests of causal hypotheses, than do comparisons involving unrelated children. Thus a sub-study of 800 pairs of same-sex twins was embedded within the overall Adolescent Brain and Cognitive Development (ABCD) design. The ABCD Twin Hub comprises four leading centers for twin research in Minnesota, Colorado, Virginia, and Missouri. Each site is enrolling 200 twin pairs, as well as singletons. The twins are recruited from registries of all twin births in each State during 2006-2008. Singletons at each site are recruited following the same school-based procedures as the rest of the ABCD study. This paper describes the background and rationale for the ABCD twin study, the ascertainment of twin pairs and implementation strategy at each site, and the details of the proposed analytic strategies to quantify genetic and environmental influences and test hypotheses critical to the aims of the ABCD study. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  15. High- and Low-Temperature Deformation Behavior of Different Orientation Hot-Rolled Annealed Zircaloy-4

    Science.gov (United States)

    Zong, Yingying; Gen, Qingfeng; Jiang, Hongwei; Shan, Debin; Guo, Bin

    2018-01-01

    In this paper, the hot-rolled annealed Zircaloy-4 samples with different orientation were subjected to uniaxial compression with a strain rate of 0.001 s-1 to obtain the stress-strain curves of different initial orientation samples at different temperatures. Electron backscatter diffraction (EBSD) technique and transmission electron microscope (TEM) technique were used to analyze the microstructures and textures of compressed samples. The mechanical properties and microstructural evolution of rolling directions (RD), transverse directions (TD) and normal directions (ND) were investigated under the conditions of - 150 °C low temperature, room temperature and 200 °C high temperature (simulated lunar temperature environment). The results show that the strength of Zircaloy-4 decreases with the increase in deformation temperature, and the strength in three orientations is ND > TD > RD. The deformation mechanism of hot-rolled annealed Zircaloy-4 with different orientation is different. In RD, 10\\bar{1}0 prismatic slip has the highest Schmid factor (SF), so it is most easy to activate the slip, followed by TD orientation, and ND orientation is the most difficult to activate. The deformed grains abide slip→twinning→slip rule, and the different orientation Zircaloy-4 deformation mechanisms mainly are the twinning coordinated with the slip.format with 600 dpi resolution." ->

  16. Establishing a Twin Registry in Guinea-Bissau

    DEFF Research Database (Denmark)

    Bjerregaard-Andersen, Morten; Gomes, Margarida A; Joaquím, Luis C

    2013-01-01

    represent a powerful tool. Though twin studies have been carried out by the Bandim Health Project for more than 30 years, the renewed registry described here was officially established in 2009 and includes both a cohort of newborn twins and a cohort of young and adult twins. Currently more than 1,500 twins...

  17. Acardiac acephalus twin: A case report | Bukar | Tropical Journal of ...

    African Journals Online (AJOL)

    Acardiac acephalus twin is a rare complication of monochorionic twinning. A case of a 26year old who presented to the emergency unit of the University of Maiduguri Teaching Hospital [UMTH] with ultrasound report of non viable but morphologically normal twin pregnancy is presented. She was delivered of a twin still born; ...

  18. Rare Complications with Monochorionic Twins: Ultrasonography and Pathology Correlations

    Energy Technology Data Exchange (ETDEWEB)

    Song, Mi Jin [Cheil General Hospital and Women' s Healthcare Center, Kwandong University College of Medicine, Seoul (Korea, Republic of)

    2009-12-15

    We reviewed the sonographic features of rare complications with monochorionic twins and we correlated these features with the pathologic findings. The complications, including the twin reversed arterial perfusion sequence, the twin embolization syndrome, the conjoined twins and umbilical cord entanglement. A better understanding of these complications can aid making an accurate prenatal diagnosis and predicting the fetal outcome

  19. Obstetric Outcome in Twin Gestation in a Nigerian Tertiary Hospital ...

    African Journals Online (AJOL)

    BACKGROUND: Twin pregnancies are high risk pregnancies. Foetal and maternal complications are common in twin pregnancies. Therefore, periodic review is necessary to improve on the twin pregnancy outcome. OBJECTIVE: To determine the incidence and outcome of twin pregnancies in the hospital. MATERIALS AND ...

  20. Twin Delivery: Comparison of Incidence and Foetal Outcome in two ...

    African Journals Online (AJOL)

    Background: The incidence of twin delivery in Nigeria may have changed, in view of the worldwide increase in the rates of twinning attributed to increasing maternal age and use of fertility therapies. Objective: To determine the current incidence of twin delivery in Benin City and document the foetal outcome in twins.

  1. What kind of twins were Jacob and Esau?

    African Journals Online (AJOL)

    common (or uncommon) then as it is now, the incidence of twins today being once in every 80 pregnancies, with dizygotic twins occurring three times more frequently than monozygotic twins.' The Bible probably only refers to these two particular cases of twin deliveries because they were exceptional: the first deliVery ...

  2. Twin and Triplet Drugs in Opioid Research

    Science.gov (United States)

    Fujii, Hideaki

    Twin and triplet drugs are defined as compounds that contain respectively two and three pharmacophore components exerting pharmacological effects in a molecule. The twin drug bearing the same pharmacophores is a "symmetrical twin drug", whereas that possessing different pharmacophores is a "nonsymmetrical twin drug." In general, the symmetrical twin drug is expected to produce more potent and/or selective pharmacological effects, whereas the nonsymmetrical twin drug is anticipated to show both pharmacological activities stemming from the individual pharmacophores (dual action). On the other hand, nonsymmetrical triplet drugs, which have two of the same pharmacophores and one different moiety, are expected to elicit both increased pharmacological action and dual action. The two identical portions could bind the same receptor sites simultaneously while the third portion could bind a different receptor site or enzyme. This review will mainly focus on the twin and triplet drugs with an evaluation of their in vivo pharmacological effects, and will also include a description of their pharmacology and synthesis.

  3. Acardiac Parabiotic Fetus: A Rare Complication of Twin Pregnancy

    Directory of Open Access Journals (Sweden)

    Sood S

    2015-10-01

    Full Text Available Acardiac parabiotic fetus is sequelae of complication of monochorionic monoamniotic twin pregnancy also known as Twin Reversed Arterial Perfusion Sequence (TRAP. It is rare affecting 1 in 35,000 births and 1 % of monozygotic twins. Acardiac parabiotic twin commonly known as parasite occurs rarely and may lead to high output cardiac failure, hydrops or premature delivery in the pump fetus. In this report, we present a 23 years old primigravida with twin pregnancy, with twin reversed arterial perfusion sequence with one of the twins being acardiac anceps and the other normal pump fetus. This association is relatively uncommon and therefore rarely documented.

  4. Personality traits in unaffected twins discordant for affective disorder

    DEFF Research Database (Denmark)

    Vinberg, M; Kyvik, Kirsten Ohm; Mortensen, E L

    2007-01-01

    OBJECTIVE: To examine whether a high genetic liability to develop affective disorder is associated with specific personality traits. METHOD: A cross-sectional, high-risk, case-control study. Through nation-wide registers, healthy monozygotic (MZ) and dizygotic (DZ) twins with (high-risk twins......) and without (the control group/low-risk twins) a co-twin history of affective disorder were identified. Personality traits were compared for a total of 211 high-risk and low-risk twins. RESULTS: In univariate analyses, the high-risk twins had a higher level of neuroticism than the control twins (P = 0...

  5. Plasmonic color metasurfaces fabricated by a high speed roll-to-roll method

    DEFF Research Database (Denmark)

    Murthy, Swathi; Pranov, Henrik; Feidenhans'l, Nikolaj Agentoft

    2017-01-01

    Lab-scale plasmonic color printing using nano-structured and subsequently metallized surfaces have been demonstrated to provide vivid colors. However, upscaling these structures for large area manufacturing is extremely challenging due to the requirement of nanometer precision of metal thickness....... In this study, we have investigated a plasmonic color meta-surface design that can be easily upscaled. We have demonstrated the feasibility of fabrication of these plasmonic color surfaces by a high-speed roll-to-roll method, comprising roll-to-roll extrusion coating at 10 m min-1 creating a polymer foil having...... 100 nm deep pits of varying sub-wavelength diameter and pitch length. Subsequently this polymer foil was metallized and coated also by high-speed roll-to-roll methods. The perceived colors have high tolerance towards the thickness of the metal layer, when this thickness exceeds the depths of the pits...

  6. HREM studies on the microstructure of severely cold-rolled TiNi alloy after reverse martensitic transformation

    International Nuclear Information System (INIS)

    Zheng, Y.F.; Zhao, L.C.

    2000-01-01

    The microstructure of Ti-49.8at.%Ni alloy, which was cold rolled to about 30% reduction in thickness in its martensitic condition and subsequently heated up to 200 C for half an hour, has been studied by high resolution electron microscopy. The interface between parent phase and martensite is not smooth and well coherent. The boundary between two subgrains of the parent phase is not straight but perfectly coherent, with partial dislocation observed at the interface. Inside some parent phase grains, thin plate-like {114} and spear-like {112} twin-related parent phase variant pairs are observed. The {114} twinning boundary is relatively straight, but with two or three atomic-height blurred layers existing near the interface. (orig.)

  7. TwinFocus CPV system

    Science.gov (United States)

    Nardello, Marco; Centro, Sandro

    2017-09-01

    TwinFocus® is a CPV solution that adopts quasi-parabolic, off axis mirrors, to obtain a concentration of 760× on 3J solar cells (Azur space technology) with 44% efficiency. The adoption of this optical solution allows for a cheap, lightweight and space efficient system. In particular, the addition of a secondary optics to the mirror, grants an efficient use of space, with very low thicknesses and a compact modular design. Materials are recyclable and allow for reduction of weights to a minimum level. The product is realized through the cooperation of leading edge industries active in automotive lighting and plastic materials molding. The produced prototypes provide up to 27.6% efficiency according to tests operated on the field with non-optimal spectral conditions.

  8. Breastfeeding Twins: A Qualitative Study

    Science.gov (United States)

    Alvur, Tuncay Muge; Kose, Dilek; Nemut, Tijen

    2013-01-01

    The purpose of this qualitative research was to explore the needs and difficulties of mothers who had multiple babies at Sakarya County by focusing on their breastfeeding experience. Ten mothers who gave birth to multiple infants participated in the study voluntarily. The framework method of data analysis was applied systematically both within and across cases, with categories and themes identified by reading transcripts of interviews. Major themes generated from focus narrative interviews are described. These themes are: willingness of mothers to breastfeed and continue, management of breastfeeding, use of pacifier, daily life, ınstructions of healthcare personnel, and advices from practice of experienced mothers. This study showed that women were aware of the importance of mother's milk for their babies. They all, somehow, made intensive efforts to breastfeed their twins. Women who expect and/or have multiple babies need much more support and guidance, which may include advice for nutritional and daily care. PMID:24592592

  9. Successful twin pregnancy after orthotopic liver transplantation

    Directory of Open Access Journals (Sweden)

    Coelho Júlio Cezar Uili

    2002-01-01

    Full Text Available AIM: Report of a case of successful twin pregnancy following liver transplantation. PATIENT AND METHOD: A 42-year-old nulliparous-woman was subjected to an orthotopic liver transplantation due to Budd-Chiari syndrome. Sixteen months after the transplantation, an ultrasonography revealed twin pregnancy. Her prenatal course was uneventful, except for mild arterial hypertension. The immunosuppressive agents used during pregnancy were cyclosporine and prednisone. RESULT: The patient gave birth to two healthy girls at 37 weeks of gestation. The patient's postpartum course was uneventful with normal liver and renal function tests. CONCLUSION: Following successful pregnancy, women may become pregnant and give birth to normal children, including twins

  10. Undiagnosed xiphopagus twins: a perinatal malady

    Directory of Open Access Journals (Sweden)

    Gowri Dorairajan

    2012-02-01

    Full Text Available Conjoined twins are a very rare entity. It is associated with poor survival rate in the presence of vital organ sharing. The entity can be diagnosed as early as the first trimester. A conjoined twin diagnosed late in labor is a malady with high perinatal mortality and maternal morbidity. We present one such case of xiphopagus twins. The management of a case diagnosed late in labor can be very challenging. Such obstetric challenges can be avoided by a meticulous early scan with a high index of suspicion, especially in the absence of separating membrane while scanning multiple pregnancies.

  11. Twin trisomies-Edward and Patau syndromes.

    Science.gov (United States)

    Massiah, Nadine; Griffiths, Emma; Bamigboye, Vincent

    2008-11-01

    To report the rare occurrence of dichorionic diamniotic twins with dissimilar aneuploidies. Case report. District general hospital. A 36-year-old woman conceived by in vitro fertilization. Dichorionic diamniotic twins were found to have elevated nuchal translucencies and cystic hygromas. Intrauterine deaths occurred at 13 and 17 weeks gestation. Medical termination of pregnancy. Karyotypes. Cytogenetic studies confirmed Edward's and Patau's syndromes. The aetiology is unknown but maternal age and in vitro fertilization may be linked since the incidence of aneuploidy rises with maternal age and the incidence of twins' increases with assisted reproductive techniques. This case highlights the need for obstetricians to have good communication and counselling skills.

  12. Designs rolle i brugerdreven innovation

    DEFF Research Database (Denmark)

    Mikkelsen, Mette

    2009-01-01

    Baggrunden for afhandlingen er rapporten 'Brugerdreven Innovation - resultater og anbefalinger' som er udarbejdet af FORA på vegne af Erhvervs- og Byggestyrelsen i 2005.  I denne rapport opsummeres resultaterne fra en række branchespecifikke studier af den rolle brugerdreven innovation spiller i...... anvendelsen af brugerdreven innovation i Danmark.".   Nærværende afhandling taget sit udgangspunkt i en analyse af forskellige former for brugerdreven innovation og de grænser for brugerinddragelse, som forskere som Leonard-Barton og Verganti ser. Formålet er at anskueliggøre de forskellige roller designeren...... spiller i forskellige former for brugerdreven innovation.   Horst Rittel definerer et wicked problem som en rodet problemstilling, hvor man ikke umiddelbart kan systematisere sig ud af kompleksitet, men må træffe valg, der er afgørende for såvel løsning som den måde, et problem forstås på. Med...

  13. Dynamics of a rolling robot.

    Science.gov (United States)

    Ilin, K I; Moffatt, H K; Vladimirov, V A

    2017-12-05

    Equations describing the rolling of a spherical ball on a horizontal surface are obtained, the motion being activated by an internal rotor driven by a battery mechanism. The rotor is modeled as a point mass mounted inside a spherical shell and caused to move in a prescribed circular orbit relative to the shell. The system is described in terms of four independent dimensionless parameters. The equations governing the angular momentum of the ball relative to the point of contact with the plane constitute a six-dimensional, nonholonomic, nonautonomous dynamical system with cubic nonlinearity. This system is decoupled from a subsidiary system that describes the trajectories of the center of the ball. Numerical integration of these equations for prescribed values of the parameters and initial conditions reveals a tendency toward chaotic behavior as the radius of the circular orbit of the point mass increases (other parameters being held constant). It is further shown that there is a range of values of the initial angular velocity of the shell for which chaotic trajectories are realized while contact between the shell and the plane is maintained. The predicted behavior has been observed in our experiments.

  14. Attractiveness Differences Between Twins Predicts Evaluations of Self and Co-Twin

    Science.gov (United States)

    Principe, Connor P.; Rosen, Lisa H.; Taylor-Partridge, Teresa; Langlois, Judith H.

    2012-01-01

    One of the most consistent findings in psychology shows that people prefer and make positive attributions about attractive compared with unattractive people. The goal of the current study was to determine the power of attractiveness effects by testing whether these social judgments are made where attractiveness differences are smallest: between twins. Differences in facial attractiveness predicted twins’ evaluations of self and their co-twin (n = 158; 54 male). In twin pairs, the more attractive twin judged their less attractive sibling as less physically attractive, athletic, socially competent, and emotionally stable. The less attractive twin did the reverse. Given that even negligible differences in facial attractiveness predicted self and co-twin attitudes, these results provide the strongest test yet of appearance-based stereotypes. PMID:23467329

  15. NUMERICAL ANALYSIS OF SPLITTING WITHOUT WASTE BASED ON CROSS-WEDGE ROLLING IN DOUBLE ROLLING MECHANISM

    Directory of Open Access Journals (Sweden)

    Arkadiusz Tofil

    2013-03-01

    Full Text Available The article presents the results of numerical analysis of splitting without waste on the basis of cross wedge rolling in double rolling mechanism. The analysed process concerns rolling the charge of V-shaped groove, and rotary bending causing the split of the material. In the calculations a method of finite elements (FEM was used. The obtained results allowed detailed analysis of the splitting process in terms of the level of deformation, strains, material breaking, flow kinematics and strength parameters.

  16. Cohort Profile : The National Academy of Sciences-National Research Council Twin Registry (NAS-NRC Twin Registry)

    NARCIS (Netherlands)

    Gatz, Margaret; Harris, Jennifer R.; Kaprio, Jaakko; McGue, Matt; Smith, Nicholas L.; Snieder, Harold; Spiro, Avron; Butler, David A.

    The National Academy of Sciences-National Research Council Twin Registry (NAS-NRC Twin Registry) is a comprehensive registry of White male twin pairs born in the USA between 1917 and 1927, both of the twins having served in the military. The purpose was medical research and ultimately improved

  17. Influence of cold rolling and ageing treatment on microstructure and mechanical properties of Ti-30Nb-5Ta-6Zr alloy.

    Science.gov (United States)

    Wang, Yu; Zhao, Juan; Dai, Shijuan; Chen, Feng; Yu, Xinquan; Zhang, Youfa

    2013-11-01

    In this study, the relationship between deformation mechanism and rolling reductions was investigated, and the effects of deformation reductions on the microstructure and mechanical properties of the alloys both cold rolled and aged were revealed. It was found that the equiaxed β grains of the Ti-30Nb-5Ta-6Zr alloy have elongated gradually with increasing the deformation reduction. The deformation mechanism of dislocation slipping, deformed twins and SIM α″ phase appeared in the alloy deformed by 23% and 66%. The type of twins of the alloy deformed by 23% and 66% are {112}〈111〉 and {332}〈113〉 respectively. When the reduction was up to 85%, dislocation slipping was the main mode of deformation accompanying with SIM α″ phase occurred. With increasing deformation reduction, the average size of lenticular precipitation α phase decreased gradually. The strength of cold rolled and aged samples increased with increasing deformation reduction, while elastic modulus decreased. Due to the precipitation α phase, the elastic modulus of aged samples was higher than cold rolled. © 2013 Elsevier Ltd. All rights reserved.

  18. Decision Support for the Rolling Stock Dispatcher

    DEFF Research Database (Denmark)

    Groth, Julie Jespersen

    Real-time recovery is receiving a fast growing interest in an increasingly competitive railway operation market. This thesis considers the area of rolling stock dispatching which is one of the typical real-time railway dispatching problems. All work of the thesis is based on the network...... and planning processes of the railway operator DSB S-tog a/s. In the thesis the problems existing in the railway planning process from the strategic to real-time level are briefly sketched. Network planning, line planning, timetabling, crew and rolling stock planning is outlined and relevant references...... are given. Specifically the thesis references the operation research studies based on the railway operation of DSB S-tog a/s. Subsequently the process of dispatching is outlined with a specific emphasis on rolling stock. The rolling stock recovery problem is the problem of assigning train units to train...

  19. Mathematical modeling of deformation during hot rolling

    Energy Technology Data Exchange (ETDEWEB)

    Jin, D.; Stachowiak, R.G.; Samarasekera, I.V.; Brimacombe, J.K. [Univ. of British Columbia, Vancouver, British Columbia (Canada). Centre for Metallurgical Processing Engineering

    1994-12-31

    The deformation that occurs in the roll bite during the hot rolling of steel, particularly the strain-rate and strain distribution, has been mathematically modeled using finite-element analysis. In this paper three different finite-element models are compared with one another and with industrial measurements. The first model is an Eulerian analysis based on the flow formulation method, while the second utilizes an Updated Lagrangian approach. The third model is based on a commercially available program DEFORM which also utilizes a Lagrangian reference frame. Model predictions of strain and strain-rate distribution, particularly near the surface of the slab, are strongly influenced by the treatment of friction at the boundary and the magnitude of the friction coefficient or shear factor. Roll forces predicted by the model have been compared with industrial rolling loads from a seven-stand hot-strip mill.

  20. Myocardial hypertrophy in the recipient with twin-to-twin transfusion syndrome

    DEFF Research Database (Denmark)

    Jeppesen, D.L.; Jorgensen, F.S.; Pryds, O.A.

    2008-01-01

    In a set of monochorionic-diamniotic twins with twin-to-twin transfusion syndrome, systemic hypertension and biventricular myocardial hypertrophy were found in the recipient. The infant developed mild respiratory distress. A partial exchange transfusion was performed because of polycytaemia. Blood...... pressure measurements revealed persistent systemic hypertension. Biventricular hypertrophy was demonstrated by echocardiography. Blood pressure normalised after treatment with Nifedipine and the cardiac hypertrophy subsided over the following weeks. A potential contributing mechanism is intrauterine...

  1. Roll-to-roll fabricated lab-on-a-chip devices

    DEFF Research Database (Denmark)

    Vig, Asger Laurberg; Mäkelä, Tapio; Majander, Päivi

    2011-01-01

    We present a high-volume fabrication technique for making polymer lab-on-a-chip devices. Microfluidic separation devices, relying on pinched flow fraction, are roll-to-roll fabricated in a cellulose acetate (CA) film at a volume of 360 devices h−1 for a cost of approximately 0.5 euro/device. The ......We present a high-volume fabrication technique for making polymer lab-on-a-chip devices. Microfluidic separation devices, relying on pinched flow fraction, are roll-to-roll fabricated in a cellulose acetate (CA) film at a volume of 360 devices h−1 for a cost of approximately 0.5 euro...

  2. Cycloidal pendulum with a rolling cylinder

    Science.gov (United States)

    Legeza, V. P.

    2012-07-01

    Free vibrations of a heavy homogeneous cylinder rolling in a cylindrical cavity whose directing curve is a brachistochrone are considered. The equation of motion of the cylinder is derived and the circular frequency of free vibrations of the cylinder center of mass is determined. An analogy between the cycloidal pendulum with a rolling cylinder and the classical cycloidal pendulum in the form of a material point is obtained.

  3. 21 CFR 136.130 - Milk bread, rolls, and buns.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Milk bread, rolls, and buns. 136.130 Section 136....130 Milk bread, rolls, and buns. (a) Each of the foods milk bread, milk rolls, and milk buns conforms... ingredients prescribed for bread, rolls or buns by § 136.110 except that: (1) The only moistening ingredient...

  4. 21 CFR 136.160 - Raisin bread, rolls, and buns.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Raisin bread, rolls, and buns. 136.160 Section 136....160 Raisin bread, rolls, and buns. (a) Each of the foods raisin bread, raisin rolls, and raisin buns... of ingredients prescribed for bread, rolls or buns by § 136.110, except that: (1) Not less than 50...

  5. Why Low Bounce Balls Exhibit High Rolling Resistance

    Science.gov (United States)

    Cross, Rod

    2015-01-01

    A simple experiment is described to measure the coefficient of rolling friction for a low bounce ball rolling on a horizontal surface. As observed previously by others, the coefficient increased with rolling speed. The energy loss due to rolling friction can be explained in terms of the measured coefficient of restitution for the ball, meaning…

  6. Maintenance in Railway Rolling Stock Rescheduling for Passenger Railways

    NARCIS (Netherlands)

    J.C. Wagenaar (Joris); L.G. Kroon (Leo)

    2015-01-01

    textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of passenger trains has to be rescheduled in order to maintain a feasible rolling stock circulation. A limited number of rolling

  7. Removing the twin image in digital holography by segmented filtering of in-focus twin image

    OpenAIRE

    McElhinney, C.; Hennelly, B.M.; Ahrenberg, L.; Naughton, T.J.

    2008-01-01

    We propose and investigate a new digital method for the reduction of twin-image noise from digital Fresnel holograms. For the case of in-line Fresnel holography the unwanted twin is present as a highly corruptive noise when the object image is numerically reconstructed. We propose to firstly reconstruct the unwanted twin-image when it is in-focus and in this plane we calculate a segmentation mask that borders this in focus image. The twin-image is then segmented and removed by sim...

  8. Micromechanics of twinning in a TWIP steel

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, K.M., E-mail: khandaker.rahman05@imperial.ac.uk [Department of Materials, Royal School of Mines, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom); Jones, N.G. [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Dye, D. [Department of Materials, Royal School of Mines, Imperial College London, Prince Consort Road, London SW7 2BP (United Kingdom)

    2015-05-21

    The deformation behaviour of a TWinning Induced Plasticity (TWIP) steel was studied at quasi-static strain rates using synchrotron X-ray diffraction. A {111} RD and {200} RD texture developed from the earliest stages of deformation, which could be reproduced using an elasto-plastic self consistent (EPSC) model. Evidence is found from multiple sources to suggest that twinning was occurring before macroscopic yielding. This included small deviations in the lattice strains, {111} intensity changes and peak width broadening all occurring below the macroscopic yield point. The accumulation of permanent deformation on sub-yield mechanical cycling of the material was found, which further supports the diffraction data. TEM revealed that fine deformation twins similar to those observed in heavily deformed samples formed during sub-yield cycling. It is concluded that twinning had occurred before macroscopic plastic deformation began, unlike the behaviour traditionally expected from hexagonal metals such as Mg.

  9. Infantile Perineal Protrusion in Two Monochorionic Twins

    Directory of Open Access Journals (Sweden)

    Paola Cavicchioli

    2014-11-01

    Full Text Available Case Report - Two female monochorionic-monoamniotic twins showed the same kind of infantile perineal protrusion (IPP at birth. Lesions in both twins progressively healed until resolution in 6 weeks' time; none of the twins have manifested, till date, alvus disturbances. Discussion and Literature Review - A literature review numbers approximately 100 reports of IPP. This condition has been classically classified into three categories: congenital/familiar (i.e., female sex, positive parental history of IPP, acquired (mainly due to constipation, and associated with lichen sclerosus et atrophicus. Conclusions and Final Remarks - This case report describes, for the first time, the presence of IPP in monochorionic-monoamniotic twins, supporting the existence of hereditary/genetic factors in the developing of this condition.

  10. Cooperative Research Twin Trawl Sweep Comparison Study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The "Twin-Trawl Sweep Efficiency Study" was intended to compare the sweep efficiency and selectivity of the NEFSC standardized bottom trawl to that of a standardized...

  11. Prevention of preterm delivery in twin pregnancy

    DEFF Research Database (Denmark)

    Rode, Line; Tabor, Ann

    2014-01-01

    The incidence of twin gestation has increased markedly over the past decades, mostly because of increased use of assisted reproductive technologies. Twin pregnancies are at increased risk of preterm delivery (i.e. birth before 37 weeks of gestation). Multiple gestations therefore account for 2...... sequelae such as abnormal neurophysiological development in early childhood and underachievement in school. Several treatment modalities have been proposed in singleton high-risk pregnancies. The mechanism of initiating labour may, however, be different in singleton and twin gestations. Therefore......, it is mandatory to evaluate the proposed treatments in randomised trials of multiple gestations. In this chapter, we describe the results of trials to prevent preterm delivery in twin pregnancies....

  12. Approach towards the digital optical twin

    Science.gov (United States)

    Prochnau, Marcel; Stollenwerk, Jochen; Loosen, Peter

    2017-11-01

    This paper discusses the idea of a Digital Optical Twin (DOT) in the field of optical system assembly. Furthermore, steps required towards this goal concerning the digital representation of a physical system are presented.

  13. Diabetes and Menopause: A Twin Challenge

    Science.gov (United States)

    Diabetes and menopause: A twin challenge Diabetes and menopause may team up for varied effects on your body. Here's what to ... to stay in control. By Mayo Clinic Staff Menopause — and the years leading up to it — may ...

  14. Twin Screw Mixer/Fine Grind Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 40-mm Twin-Screw Mixer/Extruder (TSE) pilot plant is a continuous, remotely operated, flexible facility that can significantly enhance safety and environmental...

  15. Twin Cities Metro Hybrid Landcover 2000 (Raster)

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Hybrid Landcover is an attempt to clean up the University of Minnesota Remote Sensing Lab's 2000 LandSat Land Cover for the Twin Cities 7-county metropolitan...

  16. Pulmonary interstitial glycogenosis in identical twins

    NARCIS (Netherlands)

    Onland, W.; Molenaar, J. J.; Leguit, R. J.; Van Nierop, J. C.; Noorduyn, L. A.; van Rijn, R. R.; Geukers, V. G. M.

    2005-01-01

    We present the clinical, radiological, and pathological findings of open lung biopsies from monozygotic prematurely born male twins with respiratory distress at ages 6 and 8 weeks postnatally Radiological examination showed a reticular nodular interstititial pattern on chest radiography

  17. Twin screw subsurface and surface multiphase pumps

    Energy Technology Data Exchange (ETDEWEB)

    Dass, P. [CAN-K GROUP OF COMPANIES, Edmonton, Alberta (Canada)

    2011-07-01

    A new subsurface twin screw multiphase pump has been developed to replace ESP and other artificial lift technologies. This technology has been under development for a few years, has been field tested and is now going for commercial applications. The subsurface twin screw technology consists of a pair of screws that do not touch and can be run with a top drive or submersible motor; and it carries a lot of benefits. This technology is easy to install and its low slippage makes it highly efficient with heavy oil. In addition twin screw multiphase pumps are capable of handling high viscosity fluids and thus their utilization can save water when used in thermal applications. It also induces savings of chemicals because asphaltenes do not break down easily as well as a reduction in SOR. The subsurface twin screw multiphase pump presented herein is an advanced technology which could be used in thermal applications.

  18. Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

    DEFF Research Database (Denmark)

    Benatto, Gisele Alves dos Reis; Roth, Bérenger; Corazza, Michael

    2016-01-01

    We report the use of roll-to-roll printed silver nanowire networks as front electrodes for fully roll-to-roll processed flexible indium-tin-oxide (ITO) free OPV modules. We prepared devices with two types of back electrodes, a simple PEDOT:PSS back electrode and a PEDOT:PSS back electrode with a ...

  19. 76 FR 34101 - Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia

    Science.gov (United States)

    2011-06-10

    ...] Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, Japan, and Russia Determinations On...-quality steel products from Russia would be likely to lead to continuation or recurrence of material... products from Brazil and revocation of the antidumping duty orders on hot-rolled flat-rolled carbon-quality...

  20. Screening and Invasive Testing in Twins

    Directory of Open Access Journals (Sweden)

    Giovanni Monni

    2014-07-01

    Full Text Available Prenatal screening and testing for trisomy 21 in twin pregnancies poses a number of challenges: the exact estimate of the a priori risk of trisomy 21, the choice of prenatal screening test and/or invasive techniques to employ for the diagnosis and the impact of the result on the options of treatment in case of discordant results within a twin pair or among multiples. These different aspects are discussed below while recognizing that many issues remain unresolved.

  1. Twin birth order, birthweight and birthweight discordance: any relationship

    Directory of Open Access Journals (Sweden)

    Onyiriuka A.N.

    2010-12-01

    Full Text Available Background: It is widely believed that in twin pairs, at birth, the first-born weigh more than the second-born but this concept has been challenged. Objective: To assess the truthfulness of this common concept that first-born twins are usually heavier than their second-born siblings at birth. Methods: In a series of 104 sets of live-born twins, the birth weights of first-born twins were compared with those of their second-born siblings, after controlling for gender. Their intra-pair birthweight differences were determined and twin pairs whose birthweight difference was 15% or more were designated as discordant. Results: Twin I was heavier than Twin II in 61.5% of cases while Twin II was heavier than Twin I in 28.9% of cases. Twins I and II had equal birthweights in 9.6% of cases. Comparing the mean birthweight of the first-born-male twin with that of second-born- male twin, it was 2515+427g (95% Confidence Interval, CI=2402-2628 versus 2432 +435g (95% CI=2321-2543 p>0.05. The mean birthweight of first-born-female twin was 2326+445g (95% CI=2214-2439 while that of the second-born-female twin was 2325+501g (95% CI=2197-2453 p>0.05. When the birthweight difference exceeded 750g, the probability that Twin I will be heavier than Twin II was 83.3% (5 of 6. Conclusion: Although the first-born twin was more often heavier than their second-born siblings, either could weigh more or less at birth. The larger the birthweight difference between growth-discordant twin pair, the greater the probability that the heavier twin would be delivered first

  2. Twin pregnancy in the congenital malformed uterus.

    Science.gov (United States)

    Heinonen, Pentti K

    2016-07-01

    The frequency and outcome of twin pregnancies in women with uterine malformation were studied. The cohort comprised 13 (4.9%) women with twin pregnancy found among 263 women. They had 483 deliveries, 13 of them twins (2.7%; 95% CI 1.6-4.6%). Among 38 patients with unicornuate uterus 5 (6.8%) out of 74 deliveries were twins, 39 women with didelphic uterus 2 (3.2%) out of 62 deliveries and 147 women with septate or subseptate uterus 6 (2.3%) out of 264 deliveries were twins. The mean duration of gestation was 249 days (range 190-268 days), 5 (38%) out of 13 deliveries were premature, 25 out of 26 newborns were alive. Mean durations of gestation and mean weights of newborns did not differ when 7 cases with unicornuate or didelphic uterus were compared to 6 cases with complete or partial uterine septum. A congenital malformed uterus can bear twin pregnancy without severe complications apart from prematurity.

  3. Imperfect twinning: a clinical and ethical dilemma.

    Science.gov (United States)

    Denardin, Daniela; Telles, Jorge Alberto B; Betat, Rosilene da Silveira; Fell, Paulo Renato K; Cunha, André Campos da; Targa, Luciano Vieira; Zen, Paulo Ricardo G; Rosa, Rafael Fabiano M

    2013-09-01

    OBJECTIVE To review the history, epidemiology, etiology, gestational aspects, diagnosis and prognosis of imperfect twinning. DATA SOURCES Scientific articles were searched in PubMed, SciELO and Lilacs databases, using the descriptors "conjoined twins", "multiple pregnancy", "ultrasound", "magnetic resonance imaging" and "prognosis". The research was not delimited to a specific period of time and was supplemented with bibliographic data from books. The description of conjoined twins is legendary. The estimated frequency is 1/45,000-200,000 births. These twins are monozygotic, monochorionic and usually monoamniotic. They can be classified by the most prominent fusion site, by the symmetry between the conjoined twins or by the sharing structure. The diagnosis can be performed in the prenatal period or after birth by different techniques, such as ultrasound, magnetic resonance imaging and echocardiography. These tests are of paramount importance for understanding the anatomy of both fetuses/children, as well as for prognosis and surgical plan determination. CONCLUSIONS Although imperfect twinning is a rare condition, the prenatal diagnosis is very important in order to evaluate the fusion site and its complexity. Hence, the evaluation of these children should be multidisciplinary, involving mainly obstetricians, pediatricians and pediatric surgeons. However, some decisions may constitute real ethical dilemmas, in which different points should be discussed and analyzed with the health team and the family.

  4. Laying the ghost of twin paradox

    Directory of Open Access Journals (Sweden)

    Popović Marko

    2009-01-01

    Full Text Available Someone's true age is not written in his ID, but in his biomarkers. Aging process is not caused by time passing, but by thermodynamically laws. Entropy, extent of metabolic reaction, and temperature are Lorentz invariant, so these facts make twin paradox impossible because there is no way for one twin to age slower than the other even if the time in his frame is dilated. Entropy is the function of state, not time. So as much as standard thermodynamics concerns, the path between two points in space is equivalent to the path between two states. Whether the point B is reached by moving faster using the longer way (with time dilatation, or slower by using shortcut (without time dilatation, the state of the system after completing the road should be the same. This is supported by the fact that when two twins reach the same space-time point (point B in which the state parameters are the same. If we use entropy as an age parameter, then both twins have the same entropy value and are exactly the same biological age. Therefore, the twin paradox is a logical mistake based on wrong first premise. Bergson symmetry is not necessary any more to explain the impossibility of twin paradox.

  5. Twin bands in martensites: Statics and dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Horovitz, B. (Department of Physics, Ben-Gurion University, P.O. Box 653, Beer-Sheva, 84105, Israel (IL)); Barsch, G.R. (Materials Research Laboratory and Department of Physics, Pennsylvania State University, University Park, Pennsylvania (USA)); Krumhansl, J.A. (Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, New York (USA))

    1991-01-01

    The theory of forming a coherent twin band and its relation to the parent-product interface in a martensitic transition is studied. We find that the twin band is stabilized by a long-range elastic interaction between the twin boundaries, which is mediated via the parent phase. The mean distance {ital l} between twin boundaries is then {ital l}{similar to} {radical}{ital L}{sub 2} , with {ital L}{sub 2} the size of a twin boundary, i.e., the product grain'' size. The collective twin-boundary oscillations ( dyadons'') have unusually low frequencies and a limiting dispersion of frequency, which goes as the square root of the wave vector. Explicit results are given for a tetragonal-to-orthorhombic transition. We also show that dyadons cause the specific heat to change from a {ital T}{sup 3} temperature dependence to {ital T}{sup 2} at lower temperatures and to allow for a linear temperature dependence of the resistivity to extend to low temperatures. We compare our results with data on conventional martensites and on the more recent ceramic superconductors.

  6. Roll-to-roll processed polymer tandem solar cells partially processed from water

    DEFF Research Database (Denmark)

    Larsen-Olsen, Thue Trofod; Andersen, Thomas Rieks; Andreasen, Birgitta

    2012-01-01

    Large area polymer tandem solar cells completely processed using roll-to-roll (R2R) coating and printing techniques are demonstrated. A stable tandem structure was achieved by the use of orthogonal ink solvents for the coating of all layers, including both active layers. Processing solvents...

  7. Quality control of roll-to-roll processed polymer solar modules by complementary imaging methods

    DEFF Research Database (Denmark)

    Rösch, R.; Krebs, Frederik C; Tanenbaum, D.M.

    2012-01-01

    We applied complementary imaging methods to investigate processing failures of roll-to-roll solution processed polymer solar modules based on polymer:fullerene bulk heterojunctions. For investigation of processing deficiencies in solar modules we employed dark lock-in thermography (DLIT...

  8. Discomfort caused by low-frequency lateral oscillation, roll oscillation and roll-compensated lateral oscillation.

    Science.gov (United States)

    Beard, George F; Griffin, Michael J

    2013-01-01

    Roll compensation during cornering (aligning the feet-to-head axis of the body with the resultant force) reduces lateral acceleration, but how any improvement in comfort depends on the frequency of the acceleration has not previously been investigated. Seated subjects judged the discomfort caused by lateral oscillation, roll oscillation and fully roll-compensated lateral oscillation at each of seven frequencies (0.25-1.0 Hz). Irrespective of whether it was caused by pure lateral acceleration or gravitational acceleration due to pure roll, acceleration in the plane of the seat caused similar discomfort at frequencies less than 0.4 Hz. From 0.4 to 1.0 Hz, with the same lateral acceleration in the plane of the seat, there was greater discomfort from roll oscillation than from lateral acceleration. With fully roll-compensated lateral oscillation, discomfort was less than with either the lateral component or the roll component of the motion from 0.2 to 0.5 Hz, but discomfort increased with increasing frequency and caused similar discomfort to pure roll oscillation at 1.0 Hz. Tilting can reduce passenger exposure to vehicle lateral acceleration when cornering, but how comfort depends on the frequency of motion was unknown. This study shows 'tilt-compensation' only improves comfort at frequencies less than 0.5 Hz. The findings affect tilting vehicles and the prediction of discomfort caused by low-frequency motions.

  9. Roll compaction/dry granulation: comparison between roll mill and oscillating granulator in dry granulation.

    Science.gov (United States)

    Sakwanichol, Jarunee; Puttipipatkhachorn, Satit; Ingenerf, Gernot; Kleinebudde, Peter

    2012-01-01

    Different experimental factorial designs were employed to evaluate granule properties obtained from oscillating granulator and roll mill. Four oscillating-granulator parameters were varied, i.e. rotor speed, oscillating angle, aperture of mesh screen and rotor type. Six roll-mill parameters that were throughput, speed ratio in both first and second stages, gap between roll pair in both stages and roll-surface texture were also investigated. Afterwards, the granule properties obtained from two milling types with similar median particle size were compared. All milling parameters in both milling types affected significantly the median particle size, size distribution and amount of fine particles (P rotor types of oscillating granulator on fines. Only three milling parameters influenced significantly the flowability (P < 0.05). These were the throughput and the gap size in the first stage of roll mill and the sieve size of oscillating granulator. In comparison between milling types, the differences of granule properties were not practically relevant. However, the roll mill had much higher capacity than the oscillating granulator about seven times, resulting in improving energy savings per unit of product. Consequently, the roll mill can be applied instead of oscillating granulator for roll compaction/dry granulation technique.

  10. A Coupled Model for Work Roll Thermal Contour with Subsectional Cooling in Aluminum Strip Cold Rolling

    Directory of Open Access Journals (Sweden)

    Shao Jian

    2014-10-01

    Full Text Available Little attention had been given to the evaluation of subsectional cooling control ability under complicated working conditions. In this paper, heat generation was calculated by using finite difference method. Strip hardening, work roll elastic deformation and elastic recovery of strip were taken into account. The mean coefficient of convective heat transfer on work roll surface was simulated by FLUENT. Calculation model had used the alternative finite difference scheme, which improved the model stability and computing speed. The simulation result shows that subsectional cooling control ability is different between different rolling passes. Positive and negative control abilities are roughly the same in the same pass. The increase of rolled length, working pressure of header and friction coefficient has positive effect on subsectional cooling control ability, and the rolling speed is on the contrary. On the beginning of the pass, when work roll surface has not reached the stable temperature, control ability of subsectional cooling is mainly affected by rolled length. The effect of mean coefficient of convective heat transfer and coefficient of friction is linear. When rolling speed is over 500 m/min, control ability of subsectional cooling becomes stable.

  11. Roll-to-roll paper sensors (ROPAS); Wireless communicating sensors on paper in the logistic chain

    NARCIS (Netherlands)

    Rentrop, C.; Rubingh, J.E.J.M.; Lelieveld, R.; Sandberg, H.

    2014-01-01

    The ROPAS project (Roll-to-roll paper sensors) combines high end electronics and wireless sensors with low cost paper substrates and processing techniques that can be applied on a large scale. Paper is the next step in the printed electronics roadmap of utilising cheaper substrate materials as a

  12. Material-Process-Performance Relationships for Roll-to-Roll Coated PEM Electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Mauger, Scott; Neyerlin, K.C.; Stickel, Jonathan; Ulsh, Michael; More, Karren; Wood, David

    2017-04-26

    Roll-to-roll (R2R) coating is the most economical and highest throughput method for producing fuel cell electrodes. R2R coating encompasses many different methodologies to create uniform films on a moving web substrate. Here we explore two coating methods, gravure and slot die, to understand the impacts of each on film uniformity and performance.

  13. Superhydrophobic Properties of Nanotextured Polypropylene Foils Fabricated by Roll-to-Roll Extrusion Coating

    DEFF Research Database (Denmark)

    Telecka, Agnieszka; Murthy, Swathi; Sun, Ling

    2016-01-01

    We demonstrate the use of roll-to-roll extrusion coating (R2R-EC) for fabrication of nanopatterned polypropylene (PP) foils with strong antiwetting properties. The antiwetting nanopattern is originated from textured surfaces fabricated on silicon wafers by a single-step method of reactive ion etc...

  14. Preorganization of Nanostructured Inks for Roll-to-Roll-Coated Polymer Solar Cells

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Senkovskyy, Volodymyr; Kiriy, Anton

    2010-01-01

    , a preorganized ink was obtained that was used to make polymer solar cell modules in a full roll-to-roll coating and printing process operating in ambient air. The polymer solar cells were thus prepared by a mixture of slot die and flat-bed screen printing. Various polymer solar cell modules were prepared ranging...

  15. Dimensional ranges and rolling efficiency in a tandem cold rolling mill

    Energy Technology Data Exchange (ETDEWEB)

    Larkiola, J.

    1997-12-31

    In this work, physical models and a neural network theory have been combined in order to predict the properties of a steel strip and to optimise the process parameters in cold rolling. The prediction of the deformation resistance of the material and the friction parameter is based on the physical model presented by Bland, Ford and Ellis and artificial neural network computing (ANN). The accuracy of these models has been tested and proved by using a large amount of the measured data. With the aid of these models it has been shown that (a) the small change to the relative reduction distribution can have a clear effect upon the rolling efficiency, (b) the dimensional ranges of the tandem cold roll mill can be determined and optimised and (c) the possibility to cold roll a new product of new width, strength or thickness can be determined and the parameters of the tandem cold rolling process can be optimised. (orig.) 43 refs.

  16. Severe twin-to-twin transfusion syndrome in a scared uterus ...

    African Journals Online (AJOL)

    Background: Twin-to-twin transfusion syndrome (TTTS) is a vascular abnormality unique to monochorionic pregnancies. The associated polyhydramniosportends significant risk to uterine rupture especially in a scared uterus. Serial amnioreduction is an established technique that reduces the risks of severe polyhydramnios ...

  17. Aeroacoustic Experiments with Twin Jets

    Science.gov (United States)

    Bozak, Richard F.; Henderson, Brenda S.

    2012-01-01

    While the noise produced by a single jet is azimuthally symmetric, multiple jets produce azimuthally varying far-field noise. The ability of one jet to shield another reduces the noise radiated in the plane of the jets, while often increasing the noise radiated out of the plane containing the jets. The present study investigates the shielding potential of twin jet configurations over subsonic and over-expanded supersonic jet conditions with simulated forward flight. The experiments were conducted with 2 in. throat diameter nozzles at four jet spacings from 2.6d to 5.5d in center-to-center distance, where d is the nozzle throat diameter. The current study found a maximum of 3 dB reduction in overall sound pressure level relative to two incoherent jets in the peak jet noise direction in the plane containing the jets. However, an increase of 3 dB was found perpendicular to the plane containing the jets. In the sideline direction, shielding is observed for all jet spacings in this study.

  18. Niobium and tantalum: indispensable twins

    Science.gov (United States)

    Schulz, Klaus; Papp, John

    2014-01-01

    Niobium and tantalum are transition metals almost always paired together in nature. These “twins” are difficult to separate because of their shared physical and chemical properties. In 1801, English chemist Charles Hatchett uncovered an unknown element in a mineral sample of columbite; John Winthrop found the sample in a Massachusetts mine and sent it to the British Museum in London in 1734. The name columbium, which Hatchet named the new element, came from the poetic name for North America—Columbia—and was used interchangeably for niobium until 1949, when the name niobium became official. Swedish scientist Anders Ekberg discovered tantalum in 1802, but it was confused with niobium, because of their twinned properties, until 1864, when it was recognized as a separate element. Niobium is a lustrous, gray, ductile metal with a high melting point, relatively low density, and superconductor properties. Tantalum is a dark blue-gray, dense, ductile, very hard, and easily fabricated metal. It is highly conductive to heat and electricity and renowned for its resistance to acidic corrosion. These special properties determine their primary uses and make niobium and tantalum indispensable.

  19. Art for twins: Yorùbá artists and their statues/twin research studies: twins' education and conceptions; diurnal preference; inherited eye diseases; ultrasound counseling when twins are conjoined/popular twin reports: twin sisters (the film); rare pregnancy; diet test; French twins reared apart and reunited.

    Science.gov (United States)

    Segal, Nancy L

    2014-06-01

    The Yorùbá of Nigeria are well known for their high twinning rate and the statues they create to commemorate deceased twins. An impressive collection of this artwork was displayed at the University of California's Fowler Museum in Los Angeles between October 13, 2013 and March 2, 2014. An overview of this exhibit is provided. Next, twin research on maternal education and conception, diurnal preference, inherited eye diseases, and ultrasound counseling for couples with conjoined twins are briefly summarized. This article concludes with a discussion of media-based items related to twins. The topics include an award-winning twin film, a rare pregnancy, a diet test, and the separation and chance reunion of monozygotic female twins.

  20. Magnon Inflation: Slow Roll with Steep Potentials

    CERN Document Server

    Adshead, Peter; Burgess, C P; Hayman, Peter; Patil, Subodh P

    2016-01-01

    We find multi-scalar effective field theories (EFTs) that can achieve a slow inflationary roll despite having a scalar potential that does not satisfy the usual slow-roll condition (d V)^2 << V^2/Mp^2. They evade the usual slow-roll conditions on $V$ because their kinetic energies are dominated by single-derivative terms rather than the usual two-derivative terms. Single derivatives dominate during slow roll and so do not require a breakdown of the usual derivative expansion that underpins calculational control in much of cosmology. The presence of such terms requires some sort of UV Lorentz-symmetry breaking during inflation (besides the usual cosmological breaking). Chromo-natural inflation provides an example of a UV theory that can generate the multi-field single-derivative terms we consider, and we argue that the EFT we find indeed captures the slow-roll conditions for the background evolution for Chromo-natural inflation. We also show that our EFT can be understood as a multi-field generalization ...

  1. Autonomous Supervision and Control of Parametric Roll Resonance

    DEFF Research Database (Denmark)

    Galeazzi, Roberto

    therefore two objectives. The first is to develop methods for detection of the inception of parametric roll resonance. The second is to develop control strategies to stabilize the motion after parametric roll has started. Stabilisation of parametric roll resonance points to two possible courses of action...... strategies are then combined to stabilise parametric roll resonance within few roll cycles. Limitations on the maximum stabilisable roll angle are analysed and linked to the ii slew rate saturation and hydrodynamic stall characteristics of the fin stabilisers. The study on maximum stabilisable roll angle...... leads to the requirements for early detection. Two novel detectors are proposed, which work within a shorttime prediction horizon, and issue early warnings of parametric roll inception within few roll cycles from its onset. The main idea behind these detection schemes is that of exploiting the link...

  2. Xipho-omphalopagous twins--separation in the newborn.

    Directory of Open Access Journals (Sweden)

    Birmole B

    1993-04-01

    Full Text Available Male conjoined twins (thoraco-omphalopagous were delivered by emergency Caesarean section performed in a full term, 3rd gravida who had presented in labour. On examination one of the twins had gross monstrosity and was threatening the survival of the better twin (twin A. The cannulation and dye studies through single umbilical vein demonstrated significant cross circulation across the connecting bridge. The vein was connected to liver of twin A. An emergency separation was performed to salvage the better twin.

  3. DNA stability and schizophrenia in twins.

    Science.gov (United States)

    Nguyen, Giang H; Bouchard, Joseph; Boselli, Monica G; Tolstoi, Linda G; Keith, Louis; Baldwin, Clinton; Nguyen, Nam C; Schultz, Mark; Herrera, Victoria L M; Smith, Cassandra L

    2003-07-01

    The goal of these experiments was to understand DNA changes relevant to schizophrenia. This work compared DNA of monozygotic (MZ) twins surrounding (CAG)(n) repeating sequences, and characterized the relationship between fragile sites and schizophrenia. Twelve twin-pairs, previously classified as MZ and 18 unrelated sib-pairs, from seven families were studied. Eight twin-pairs were affected by schizophrenia, four concordantly and four discordantly. DNA comparisons were made using profiles of electrophoretic size fractionations of PCR amplified (CAG)(n) containing genomic fragments. These profiles were generated by a new method, developed by us, called targeted genomic differential display (TGDD). Surprisingly, the number of peak profile differences in MZ twin-pairs discordant for schizophrenia was greater than the concordantly ill twins and the well twins and, in some cases, overlapped the range of sib-pairs. These results might mean that some twins were not MZ but it was not possible to definitively test these samples for zygosity. Alternatively, the results might be explained as an increased mutation rate (or genomic instability) around (CAG)(n) sites in individuals afflicted with schizophrenia. Also, we uncovered an association of schizophrenia (i.e., a linkage of chromosomal abnormalities and gene localizations) with fragile sites spread throughout the genome (chi(2), P = 0.001). Furthermore, it appears that an increasing number of genes linked to schizophrenia are associated with (CAG)(n) sequences. Fragile sites and (CAG)(n) repeat sequences are known to be unstable. We speculate the association of genomic instability with schizophrenia accounts for seemingly disparate biological and environmental factors that influence disease occurrence. Copyright 2003 Wiley-Liss, Inc.

  4. Diabetes and perinatal mortality in twin pregnancies.

    Directory of Open Access Journals (Sweden)

    Zhong-Cheng Luo

    Full Text Available BACKGROUND: Diabetes in pregnancy has been associated with a paradoxically reduced risk of neonatal death in twin pregnancies. Risk "shift" may be a concern in that the reduction in neonatal deaths may be due to an increase in fetal deaths (stillbirths. This study aimed to clarify the impact of diabetes on the risk of perinatal death (neonatal death plus stillbirth in twin pregnancies. METHODS: This was a retrospective cohort study of twin births using the largest available dataset on twin births (the U.S. matched multiple birth data 1995-2000; 19,676 neonates from diabetic pregnancies, 541,481 from non-diabetic pregnancies. Cox proportional hazard models were applied to estimate the adjusted hazard ratios (aHR of perinatal death accounting for twin cluster-level dependence. RESULTS: Comparing diabetic versus non-diabetic twin pregnancies, overall perinatal mortality rate was counterintuitively lower [2.1% versus 3.3%, aHR 0.70 (95% confidence intervals 0.63-0.78]. Individually, both stillbirth and neonatal mortality rates were lower in diabetic pregnancies, but we identified significant differences by gestational age and birth weight. Diabetes was associated with a survival benefit in pregnancies completed before 32 weeks [aHR 0.55 (0.48-0.63] or with birth weight =2500 g [aHR 2.20 (1.55-3.13]. CONCLUSIONS: Diabetes in pregnancy appears to be "protective" against perinatal death in twin pregnancies ending in very preterm or very low birth weight births. Prospective studies are required to clarify whether these patterns of risk are real, or they are artifacts of unmeasured confounders. Additional data correlating these outcomes with the types of diabetes in pregnancy are also needed to distinguish the effects of pre-gestational vs. gestational diabetes.

  5. Indigenous Manufacturing realization of TWIN Source

    Science.gov (United States)

    Pandey, R.; Bandyopadhyay, M.; Parmar, D.; Yadav, R.; Tyagi, H.; Soni, J.; Shishangiya, H.; Sudhir Kumar, D.; Shah, S.; Bansal, G.; Pandya, K.; Parmar, K.; Vuppugalla, M.; Gahlaut, A.; Chakraborty, A.

    2017-04-01

    TWIN source is two RF driver based negative ion source that has been planned to bridge the gap between single driver based ROBIN source (currently operational) and eight river based DNB source (to be operated under IN-TF test facility). TWIN source experiments have been planned at IPR keeping the objective of long term domestic fusion programme to gain operational experiences on vacuum immersed multi driver RF based negative ion source. High vacuum compatible components of twin source are designed at IPR keeping an aim on indigenous built in attempt. These components of TWIN source are mainly stainless steel and OFC-Cu. Being high heat flux receiving components, one of the major functional requirements is continuous heat removal via water as cooling medium. Hence for the purpose stainless steel parts are provided with externally milled cooling lines and that shall be covered with a layer of OFC-cu which would be on the receiving side of high heat flux. Manufacturability of twin source components requires joining of these dissimilar materials via process like electrode position, electron beam welding and vacuum brazing. Any of these manufacturing processes shall give a vacuum tight joint having proper joint strength at operating temperature and pressure. Taking the indigenous development effort vacuum brazing (in non-nuclear environment) has been opted for joining of dissimilar materials of twin source being one of the most reliable joining techniques and commercially feasible across the suppliers of country. Manufacturing design improvisation for the components has been done to suit the vacuum brazing process requirement and to ease some of the machining without comprising over the functional and operational requirements. This paper illustrates the details on the indigenous development effort, design improvisation to suits manufacturability, vacuum brazing basics and its procedures for twin source components.

  6. A new transducer for roll gap measurements of the roll pressure distribution and the friction condition in cold flat rolling

    DEFF Research Database (Denmark)

    Lagergren, Jonas; Wanheim, Tarras; Presz, W.

    2005-01-01

    and stainless steel strips in a pilot mill. The recordings were selected from a steady state with no disturbance from the material flow. The transducer was able to simultaneously measure both the normal pressure and the friction stress. An estimation of the coefficient of friction was accordingly performed....... Conclusions The new transducer works very well, it was seen to be robust and able to avoid signal disturbance. The pressure and friction stress distribution results was as expected by the authors and a good reproducibility, together with a proven agreement between recorded signals and signals simulated....... Keywords Friction stress, normal pressure distribution, roll bite measurements, cold flat rolling of metals...

  7. Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes

    DEFF Research Database (Denmark)

    Dam, Henrik Friis; Andersen, Thomas Rieks; Madsen, Morten Vesterager

    2015-01-01

    We report manufacture of fully printed and coated polymer solar cells on a small scale roll-to-roll coater representing the intermediate scale between laboratory and pilot scale. We highlight the enormous span in scale between the laboratory scale and the intended industrial scale by a factor...... electrode printing that is parsimonious in terms of ink usage and more gentle than laboratory scale flexo units where the foil transport is either driven by the flexo unit or the flexo unit is driven by the foil transport. We demonstrate fully operational flexible polymer solar cell manufacture using...

  8. Controlling roll perturbations in fruit flies.

    Science.gov (United States)

    Beatus, Tsevi; Guckenheimer, John M; Cohen, Itai

    2015-04-06

    Owing to aerodynamic instabilities, stable flapping flight requires ever-present fast corrective actions. Here, we investigate how flies control perturbations along their body roll angle, which is unstable and their most sensitive degree of freedom. We glue a magnet to each fly and apply a short magnetic pulse that rolls it in mid-air. Fast video shows flies correct perturbations up to 100° within 30 ± 7 ms by applying a stroke-amplitude asymmetry that is well described by a linear proportional-integral controller. For more aggressive perturbations, we show evidence for nonlinear and hierarchical control mechanisms. Flies respond to roll perturbations within 5 ms, making this correction reflex one of the fastest in the animal kingdom. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  9. f(R) constant-roll inflation

    Energy Technology Data Exchange (ETDEWEB)

    Motohashi, Hayato [Universidad de Valencia-CSIC, Instituto de Fisica Corpuscular (IFIC), Valencia (Spain); Starobinsky, Alexei A. [L.D. Landau Institute for Theoretical Physics, RAS, Moscow (Russian Federation); National Research University Higher School of Economics, Moscow (Russian Federation)

    2017-08-15

    The previously introduced class of two-parametric phenomenological inflationary models in general relativity in which the slow-roll assumption is replaced by the more general, constant-roll condition is generalized to the case of f(R) gravity. A simple constant-roll condition is defined in the original Jordan frame, and exact expressions for a scalaron potential in the Einstein frame, for a function f(R) (in the parametric form) and for inflationary dynamics are obtained. The region of the model parameters permitted by the latest observational constraints on the scalar spectral index and the tensor-to-scalar ratio of primordial metric perturbations generated during inflation is determined. (orig.)

  10. Rolling Element Bearing Stiffness Matrix Determination (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Parker, R.

    2014-01-01

    Current theoretical bearing models differ in their stiffness estimates because of different model assumptions. In this study, a finite element/contact mechanics model is developed for rolling element bearings with the focus of obtaining accurate bearing stiffness for a wide range of bearing types and parameters. A combined surface integral and finite element method is used to solve for the contact mechanics between the rolling elements and races. This model captures the time-dependent characteristics of the bearing contact due to the orbital motion of the rolling elements. A numerical method is developed to determine the full bearing stiffness matrix corresponding to two radial, one axial, and two angular coordinates; the rotation about the shaft axis is free by design. This proposed stiffness determination method is validated against experiments in the literature and compared to existing analytical models and widely used advanced computational methods. The fully-populated stiffness matrix demonstrates the coupling between bearing radial, axial, and tilting bearing deflections.

  11. Variant selection during secondary and tertiary twinning in pure titanium

    International Nuclear Information System (INIS)

    Qin, Hong; Jonas, John J.

    2014-01-01

    Three generations of twins were identified by electron backscatter diffraction techniques in pure titanium subjected to uniaxial compression at room temperature. Many primary contraction twins were observed as the initial texture was favourable for their formation. Numerous secondary extension twins formed within the primary contraction twins and some tertiary contraction twins within the secondary extension twins. The orientations of these three generations of twins were determined and their associated Schmid factors (SFs) were calculated. The formation of the twin variants selected in each generation and the absence of certain potential variants are explained by rotating the twinning displacement gradient tensor expressed in the twin system reference frame into the crystal reference frame of the relevant neighbouring grain. The presence of the observed secondary and tertiary twins is accounted for in terms of the ease of imposing the required accommodation strains on their neighbours. The results show that secondary twins can form even with low SFs as long as their accommodation takes place by prismatic or basal glide. However, the formation of certain second and third generation potential high SF twins was impeded when this would have required accommodation by the most difficult deformation mode: pyramidal glide

  12. Measurement of Normal and Friction Forces in a Rolling Process

    DEFF Research Database (Denmark)

    Henningsen, Poul; Arentoft, Mogens; Wanheim, Tarras

    2004-01-01

    by the fric-tion conditions. To achieve this important informa-tion, measurements of the normal pressure and friction stresses in the deformation zone are re-quested. The direction of the friction stresses is changing during the rolling gap. At the entrance of the de-formation zone, the peripherical velocity...... of the roll is higher than for the incoming material, which causes frictional stresses at the material acting in the rolling direction. At the outlet of the rolling gap, the velocity of the deformed material exceeds the velocity of the roll, generating frictional stresses contrary to the direction of rolling...

  13. FE Simulation of the Stress-Strain State during Shear-Compression Testing and Asymmetric Three-Roll Rolling Process

    Directory of Open Access Journals (Sweden)

    Pesin Alexander

    2017-01-01

    Full Text Available A three-roll rolling process is a significant technique in the production of wire rod, round bars and hexagonal profiles for structural applications. Better mechanical properties of wire rod, round bars and hexagonal profiles can be achieved due to large plastic deformation by the three-roll rolling process. Asymmetric rolling is a novel technique characterized by a kinematic asymmetry linked to the difference in peripheral speed of the rolls, able to introduce additional shear strains through the bar thickness. Physical simulation of shear strain, which is similar to that occurring in asymmetric three-roll rolling process, is very important for design of technology of producing ultrafine grain materials. Shear testing is complicated by the fact that a state of large shear is not easily achievable in most specimen geometries. Application of the shear-compression testing and specimen geometry to physical simulation of asymmetric three-roll rolling process is discussed in the paper. FEM simulation and comparison of the stress-strain state during shear-compression testing and asymmetric three-roll rolling process is presented. The results of investigation can be used to optimize the physical simulation of asymmetric three-roll rolling processes and for design of technology of producing ultrafine grain materials by severe plastic deformation.

  14. Separation surgery for total vertical craniopagus twins.

    Science.gov (United States)

    Goh, Keith Y C

    2004-08-01

    A pair of conjoined twins aged 11 months underwent investigations, followed by surgical separation in Singapore General Hospital in April 2001. They were joined at the skull vertex and facing in opposite directions. Radiological investigations including cerebral angiography, magnetic resonance imaging and computerized tomographic scans were performed, leading to the diagnosis of total vertical craniopagus. There were two separate brains, with separate arterial circulations, but with a common superior sagittal sinus. Tissue expanders were inserted in the subgaleal space for 6 months of scalp expansion prior to surgery. Pre-operative planning involved the use of virtual reality equipment and life-sized polymer models of the conjoined skulls and brains. Surgical separation of the twins was achieved after approximately 100 h of operating time, using intraoperative image guidance, microsurgical techniques and intraoperative neurophysiologic monitoring. Reconstruction of the dura, calvarium and scalp was performed with artificial dura, absorbable plates and split skin grafts. Postoperative complications included focal cortical infarction, meningitis, and hydrocephalus. Despite these complications, the twins recovered satisfactorily and were discharged to their home country within 6 months. The 3-month outcome was minor disability in one twin and severe developmental delays in the other. Separation surgery is possible for complex cranially-conjoined twins but requires detailed planning and extensive surgical management.

  15. Yoruba customs and beliefs pertaining to twins.

    Science.gov (United States)

    Leroy, Fernand; Olaleye-Oruene, Taiwo; Koeppen-Schomerus, Gesina; Bryan, Elizabeth

    2002-04-01

    The Yoruba are an important ethnic group mainly occupying Southwestern Nigeria. Mainly for genetic reasons, this very large tribe happens to present the highest dizygotic twinning rate in the world (4.4 % of all maternities). The high perinatal mortality rate associated with such pregnancies has contributed to the integration of a special twin belief system within the African traditional religion of this tribe. The latter is based on the concept of a supreme deity called Olodumare or Olorun, assisted by a series of secondary gods (Orisha) while Yoruba religion also involves immortality and reincarnation of the soul based on the animistic cult of ancestors. Twins are therefore given special names and believed to detain special preternatural powers. In keeping with their refined artistic tradition, the Yoruba have produced numerous wooden statuettes called Ibejis that represent the souls of deceased newborn twins and are involved in elaborate rituals. Among Yoruba traditional beliefs and lore some twin-related themes are represented which are also found in other parts of the world. Basic features of the original Yoruba beliefs have found their way into the religious traditions of descendants of African slaves imported in the West Indies and in South America.

  16. Body odor similarity in noncohabiting twins.

    Science.gov (United States)

    Roberts, S Craig; Gosling, L Morris; Spector, Tim D; Miller, Paul; Penn, Dustin J; Petrie, Marion

    2005-10-01

    There is currently considerable interest in biometric approaches using human odor as a marker of disease or genetic individuality. Body odor is also thought to be used during mate choice to select genetically compatible mates. The idea that body odor reveals information about both genetic identity and genetic similarity is most readily tested by examining odor in twin pairs. However, although this idea can be traced back 130 years to Francis Galton in 1875, most studies using dogs fail to control for shared environmental effects associated with cohabitation. Here we show that odors of identical twins (but not dizygotic twins) can be matched by human sniffers at rates better than chance, even when the twins are living apart. In addition, matching frequencies for identical twin odors were not significantly different from those for duplicate odors from the same individual. These results indicate an important genetic influence on body odor and the potential for developing technologies for human odor printing in relation to underlying genotype.

  17. A Possible Twin: The 1960s Twin Study Revisited/Twin Research: Twin-to-Twin Heart Transplantation; Distinguishing Monozygotic Twins; Twin Conceptions via Oocyte Donation; Factors Affecting Craniofacial Traits/In the Media: Triplet Delivery in the UK; Conjoined Twins and the Concept of Self; Colombian Twin Trainers; Skin Grafting to Save an Identical Co-Twin; Lack of Physical Flaws in Dolly the Cloned Sheep; Possible Conjoined Twins of Opposite-Sex; Passing of the Remaining Twin From the World's Longest Separated Pair.

    Science.gov (United States)

    Segal, Nancy L

    2018-04-01

    This article begins with the story of a 51-year-old Los Angeles, California man, Justin Goldberg, whose daughter caught a glimpse of his striking look-alike at a popular market. Many people have so-called doppelgängers, but this occurrence is especially intriguing - the individual in question, born in New York City in the mid-1960s to an unwed mother, was an adoptee placed by the Louise Wise Adoption Agency. This agency, under the guidance of a prominent psychiatrist, decided to place twins in separate homes. Some of these twin children were part of a controversial child development study that was hidden from them and their parents. Next, recent and current twin research on heart transplantation, distinguishing monozygotic co-twins, twin conceptions via oocyte donation and factors affecting craniofacial traits are summarized. The article concludes with highlights on twins in the media, specifically, a triplet delivery in the United Kingdom, self-concept and consciousness in conjoined twins, Colombian twin trainers, skin grafting to save an identical co-twin, lack of physical flaws in Dolly the cloned sheep, possible opposite-sex conjoined twins, and the passing of the remaining twin from the world's longest separated pair.

  18. Transplanckian energy production and slow roll inflation

    International Nuclear Information System (INIS)

    Danielsson, Ulf H.

    2005-01-01

    In this paper we investigate how the energy density due to a nonstandard choice of initial vacuum affects the expansion of the universe during inflation. To do this we introduce source terms in the Friedmann equations making sure that we respect the relation between gravity and thermodynamics. We find that the energy production automatically implies a slow rolling cosmological constant. Hence we also conclude that there is no well defined value for the cosmological constant in the presence of sources. We speculate that a nonstandard vacuum can provide slow roll inflation on its own

  19. Rolling friction on a granular medium

    Science.gov (United States)

    de Blasio, Fabio Vittorio; Saeter, May-Britt

    2009-02-01

    We present experimental results for the rolling of spheres on a granular bed. We use two sets of glass and steel spheres with varying diameters and a high-speed camera to follow the motion of the spheres. Despite the complex phenomena occurring during the rolling, the results show a friction coefficient nearly independent of the velocity (0.45-0.5 for glass and 0.6-0.65 for steel). It is found that for a given sphere density, the large spheres reach a longer distance, a result that may also help explain the rock sorting along natural stone accumulations at the foot of mountain slopes.

  20. Transport of Venusian rolling 'stones' by wind?

    Science.gov (United States)

    Greeley, R.; Marshall, J. R.

    1985-02-01

    Simulations of Venusian wind processes are described which show that particles are moved by 'rolling' at wind speeds as much as 30 percent lower than those required for saltation threshold. This mode of wind transport is only observed for sustained periods in water on earth; thus, there are similarities between aqueous fluid transport on earth and atmospheric transport on Venus. The formation of small sand ridges and grooves oriented parallel to the wind direction is associated with the rolling of grains in Venusian simulations and these structures may be unique aeolian features on Venus.

  1. Influence of Surge on Extreme Roll Amplitudes

    DEFF Research Database (Denmark)

    Vidic-Perunovic, Jelena; Rognebakke, Olav; Pedersen, Preben Terndrup

    2008-01-01

    on the position of the wave crest relatively to the ship, the ship will be slowed down when she meets the wave. In this paper attempts are made to accurately account for added resistance and additional thrust, applied in order to maintain the ship speed. The surge equilibrium equation has been longitudinally......Interference of the wave-induced ship surge motion with roll dynamics has been studied. The surge motion has been included in a previously derived hydrodynamic roll prediction model in order to account for the ship speed variation due to the longitudinal incident wave pressure force. Depending...

  2. Controlling roll perturbations in fruit flies

    OpenAIRE

    Beatus, Tsevi; Guckenheimer, John M.; Cohen, Itai

    2015-01-01

    Owing to aerodynamic instabilities, stable flapping flight requires ever-present fast corrective actions. Here, we investigate how flies control perturbations along their body roll angle, which is unstable and their most sensitive degree of freedom. We glue a magnet to each fly and apply a short magnetic pulse that rolls it in mid-air. Fast video shows flies correct perturbations up to 100° within 30 ± 7 ms by applying a stroke-amplitude asymmetry that is well described by a linear proportion...

  3. Utilization of a numerical model of the temperature field of a conti-casting and prediction anti-break systems at the continuous caster of the steelworks division plant to improve the production quality at U. S Steel Košice, Ltd.

    Directory of Open Access Journals (Sweden)

    Marek Pavol

    2003-09-01

    Full Text Available The paper presents the optimization elements at the continuous caster (CC from the view of the quality management and the costsavingprogram at U. S. Steel Košice, Ltd. The presented issue represents a partial problem within one step of the production cycle, which isconnected with the quality of slabs and with managing their subsequent processing. The solutions to reduce the occurrence of slab defectsare presented. The authors describe the utilization of anti-break systems of the continuous caster and an original numerical model of thenon-stationary temperature field of a conti-casting for CC#2, which solves current thermo-kinetic problems generally, as well asindividually. This model helps to optimize the primary and secondary cooling at CC#2 and to improve the surface quality of slabs.

  4. Reactive boundary layers in metallic rolling contacts

    International Nuclear Information System (INIS)

    Burbank, John

    2016-01-01

    treated materials. The second pre-conditioning method involved the targeted generation of chemically reactive tribolayers (tribofilms) on twin disk testing rigs. The lubrication strategies were based on: a. CaCO 3 , which is predominant in engine oils, and b. MoDTC, which is commonly used in engine and gear oils. The films generated in pre-conditioning were analyzed by SEM-EDX with Element-Mapping, Raman spectroscopy, and XPS to elucidate their molecular composition and concentration on the sample surfaces. The combination of these methods of analysis gave a clear indication that 10 4 cycles were sufficient to generate stable and lasting tribofilms. CaO and CaCO 3 were the main components of the tribofilm from the first lubricant package, while MoS 2 , MoO 2 and MoO 3 were the main components from the second lubricant package. Finally, slip-rolling endurance testing (T = +120 C, 10 7 cycles, approximately 19 days in a factory fill engine oil) was carried out on all materials. It was shown that both pre-conditioning methods could achieve significant reductions in friction and wear during testing at up to and including P 0Mean =1.94 GPa (P 0Max = 2.91 GPa, F N = 2,000 N). Ultimately, this research showed that: 1. non-case-hardened high-performance steels offer competitive wear performance and better friction behaviour than the case-hardened 20MnCr5. 2. pre-conditioning led to COF reductions to under 7/10 and wear coefficient reductions to an astonishing 1/10 of the original values for the untreated steels under mixed/boundary lubrication. 3. the observed improvements to friction behaviour and wear performance are indicative of a technically simple, cost- and energy-efficient pre-conditioning strategy that may prove an appropriate substitute for existing thermochemical treatments for steel alloys.

  5. Reactive boundary layers in metallic rolling contacts

    Energy Technology Data Exchange (ETDEWEB)

    Burbank, John

    2016-05-01

    of the treated materials. The second pre-conditioning method involved the targeted generation of chemically reactive tribolayers (tribofilms) on twin disk testing rigs. The lubrication strategies were based on: a. CaCO{sub 3}, which is predominant in engine oils, and b. MoDTC, which is commonly used in engine and gear oils. The films generated in pre-conditioning were analyzed by SEM-EDX with Element-Mapping, Raman spectroscopy, and XPS to elucidate their molecular composition and concentration on the sample surfaces. The combination of these methods of analysis gave a clear indication that 10{sup 4} cycles were sufficient to generate stable and lasting tribofilms. CaO and CaCO{sub 3} were the main components of the tribofilm from the first lubricant package, while MoS{sub 2}, MoO{sub 2} and MoO{sub 3} were the main components from the second lubricant package. Finally, slip-rolling endurance testing (T = +120 C, 10{sup 7} cycles, approximately 19 days in a factory fill engine oil) was carried out on all materials. It was shown that both pre-conditioning methods could achieve significant reductions in friction and wear during testing at up to and including P{sub 0Mean} =1.94 GPa (P{sub 0Max} = 2.91 GPa, F{sub N} = 2,000 N). Ultimately, this research showed that: 1. non-case-hardened high-performance steels offer competitive wear performance and better friction behaviour than the case-hardened 20MnCr5. 2. pre-conditioning led to COF reductions to under 7/10 and wear coefficient reductions to an astonishing 1/10 of the original values for the untreated steels under mixed/boundary lubrication. 3. the observed improvements to friction behaviour and wear performance are indicative of a technically simple, cost- and energy-efficient pre-conditioning strategy that may prove an appropriate substitute for existing thermochemical treatments for steel alloys.

  6. Voltage and Thermally Driven Roll-to-Roll Organic Printed Transistor Made in Ambient Air Conditions

    DEFF Research Database (Denmark)

    Pastorelli, Francesco

    Resume: Organic thin film transistors offer great potential for use in flexible electronics. Much of this potential lies in the solution processability of the organic polymers enabling both roll coating and printing on flexible substrates and thus greatly reducing the material and fabrication costs....... We present flexible organic power transistors prepared by fast (20 m min−1) roll-to-roll flexographic printing of the drain and source electrode structures, with an interspace below 50 um, directly on polyester foil[1]. The devices have top gate architecture and were completed by slotdie coating...

  7. Nationwide Twin Birth Weight Percentiles by Gestational Age in Taiwan

    Directory of Open Access Journals (Sweden)

    I-Jan Hu

    2015-10-01

    Conclusion: This is the first nationwide birth weight norm for twins in Taiwan, which is particularly useful for investigation into the predictors and outcomes of altered fetal growth through twin studies in the Taiwanese population.

  8. The antenatal diagnosis of cephalothoracopagus Janiceps conjoined twins.

    Science.gov (United States)

    Ramadani, H M; Johnshrud, N; al Nasser, M; Rayes, O

    1994-02-01

    A case of cephalothoracopagus conjoined twins (Janiceps twins) is presented. The abnormality was detected antenatally by the use of ultrasonography and confirmed postnatally, clinically and by computed tomography (CT scan).

  9. Twin boundaries, interfaces and modulated structures in martensites. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Barsch, G.R.

    1992-09-30

    Theoretical studies were pursued with supporting experimental investigations (In-Tl) on the statics, dynamics, and statistical mechanics of twin boundaries, twin bands, and pretransformation structural modulations in proper and improper ferroelastic martensites.

  10. Twinning dislocation and twin propagation process in a nickel-base single crystal TMS-82 superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Xianzi; Zhang, Jianxin [Shandong Univ., Jinan (China). Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials; Harada, Hiroshi [National Institute for Materials Science, Ibaraki (Japan)

    2014-03-15

    Thermomechanical fatigue cyclic loading tests have been carried out along the <001> orientation and the formation of twins during thermomechanical fatigue processing has been studied in detail in a nickel-base single crystal TMS-82 superalloy. The twinning dislocation is determined to be 1/6<112> in the γ' phase except for the 1/3<112> dislocation, which operates on every successive {111} plane. The 1/6<112> twinning dislocations can move independently in both γ and γ' phases. Although movement of a single 1/6<112> twining dislocation may destroy the ordering of γ' phase, its existence is rationalized on the basis of crystallographic analysis. The movement of a 1/3<112> dislocation on a single {111} plane will lead to a high-energy stacking sequence of head-to-head of two neighboring {111} layer atoms in the L1{sub 2} structure. Pre-existing dislocations have a significant effect on the growth of deformation twins. In the dislocation-free area, the twin can propagate without any notable impediment to lead to a twin plate with equal width. High dislocation density may hinder the propagation of twins to varying degrees. (orig.)

  11. Low twinning rate and seasonal effects on twinning in a fertile population, the Hutterites

    Science.gov (United States)

    Nonaka, K.; Miura, T.; Peter, K.

    1993-09-01

    This paper analyzes from the mid 18th century to 1987 the birth records of the “Dariusleut,” one of the three subgroups of the Hutterite population. The aim of this study is to describe several aspects of the twinning rate in a fertile population. The overall rate of twinning was 0.90%:103 twins among all 11492 maternities. The rate peaked at the 7th birth order and at the maternal age of 40 years and over. Until the mid 19th century when the Hutterites lived in Russia, the twinning rate was higher (1.5%), and it decreased during the migration period in the second half of the 19th century (0.7%). After the group had settled in the USA and Canada, the population maintained a twinning rate of 1.0% until 1965. After 1965 the rate decreased to 0.7%, partly due to a decline in fertility among women aged 30 years and over. There was a significant seasonal variation: the twinning rate decreased to 0.5% in May July compared to 1.2% for the other three seasons during the years up to 1965 ( P<0.01), while more recent mothers did not show such a seasonal variation. The incidence of twin births in this population seems to have been influenced by environmental factors, which would change their effect seasonally and secularly.

  12. A Twin Protection Effect? Explaining Twin Survival Advantages with a Two-Process Mortality Model.

    Directory of Open Access Journals (Sweden)

    David J Sharrow

    Full Text Available Twin studies that focus on the correlation in age-at-death between twin pairs have yielded important insights into the heritability and role of genetic factors in determining lifespan, but less attention is paid to the biological and social role of zygosity itself in determining survival across the entire life course. Using data from the Danish Twin Registry and the Human Mortality Database, we show that monozygotic twins have greater cumulative survival proportions at nearly every age compared to dizygotic twins and the Danish general population. We examine this survival advantage by fitting these data with a two-process mortality model that partitions survivorship patterns into extrinsic and intrinsic mortality processes roughly corresponding to acute, environmental and chronic, biological origins. We find intrinsic processes confer a survival advantage at older ages for males, while at younger ages, all monozygotic twins show a health protection effect against extrinsic death akin to a marriage protection effect. While existing research suggests an increasingly important role for genetic factors at very advanced ages, we conclude that the social closeness of monozygotic twins is a plausible driver of the survival advantage at ages <65.

  13. A Twin Protection Effect? Explaining Twin Survival Advantages with a Two-Process Mortality Model.

    Science.gov (United States)

    Sharrow, David J; Anderson, James J

    2016-01-01

    Twin studies that focus on the correlation in age-at-death between twin pairs have yielded important insights into the heritability and role of genetic factors in determining lifespan, but less attention is paid to the biological and social role of zygosity itself in determining survival across the entire life course. Using data from the Danish Twin Registry and the Human Mortality Database, we show that monozygotic twins have greater cumulative survival proportions at nearly every age compared to dizygotic twins and the Danish general population. We examine this survival advantage by fitting these data with a two-process mortality model that partitions survivorship patterns into extrinsic and intrinsic mortality processes roughly corresponding to acute, environmental and chronic, biological origins. We find intrinsic processes confer a survival advantage at older ages for males, while at younger ages, all monozygotic twins show a health protection effect against extrinsic death akin to a marriage protection effect. While existing research suggests an increasingly important role for genetic factors at very advanced ages, we conclude that the social closeness of monozygotic twins is a plausible driver of the survival advantage at ages <65.

  14. On the theory of twinning plane superconductivity

    International Nuclear Information System (INIS)

    Mishonov, T.M.

    1988-01-01

    The thermodynamic potential of the superconducting layer in the twinning plane (TP) vicinity for the type I superconductors is found. The corrections to the surface tension in powers of the Ginsburg-Landau parameter κ are obtained. The corresponding states law for the supercooling field for the type I twinning plane superconductivity (TPS) is obtained, as well as the critical field law for the type II TPS. A review of experimental and theoretical works on TPS and some similar systems is given. The conditions for the Berezinski-Kosterlitz-Thouless transition for the proximity effect are discussed, as well as the possible mechanisms for the conducting phase transition TPS in Nb and the pinning forces close to the twinning plane. The obtained order parameter distribution can be used for description of the superlattices from normal and superconducting metals as well. 6 figs., 44 refs

  15. Strong crystal size effect on deformation twinning

    DEFF Research Database (Denmark)

    Yu, Qian; Shan, Zhi-Wei; Li, Ju

    2010-01-01

    find that the stress required for deformation twinning increases drastically with decreasing sample size of a titanium alloy single crystal7, 8, until the sample size is reduced to one micrometre, below which the deformation twinning is entirely replaced by less correlated, ordinary dislocation...... plasticity. Accompanying the transition in deformation mechanism, the maximum flow stress of the submicrometre-sized pillars was observed to saturate at a value close to titanium’s ideal strength9, 10. We develop a ‘stimulated slip’ model to explain the strong size dependence of deformation twinning....... The sample size in transition is relatively large and easily accessible in experiments, making our understanding of size dependence11, 12, 13, 14, 15, 16, 17 relevant for applications....

  16. Statistics of twinning in strained ferroelastics

    Science.gov (United States)

    Ding, Xiangdong; Aktas, Oktay; Wang, Xiaofei; Li, Suzhi; Zhao, Ziyuan; Zhang, Libo; He, Xiaomei; Lookman, Turab; Saxena, Avadh; Sun, Jun

    2017-10-01

    In this review, we show that the evolution of the microstructure and kinetics of ferroelastic crystals under external shear can be explored by computer simulations of 2D model materials. We find that the nucleation and propagation of twin boundaries in ferroelastics depend sensitively on temperature. In the plastic regime, the evolution of the ferroelastic microstructure under strain deformation maintains a stick-and-slip mechanism in all temperature regimes, whereas the dynamic behavior changes dramatically from power-law statistics at low temperature to a Kohlrausch law at intermediate temperature, and then to a Vogel-Fulcher law at high temperature. In the yield regime, the distribution of jerk energies follows power-law statistics in all temperature regimes for a large range of strain rates. The non-spanning avalanches in the yield regime follow a parabolic temporal profile. The changes of twin pattern and twin boundaries density represent an important step towards domain boundary engineering.

  17. A Danish Twin Study of Schizophrenia Liability

    DEFF Research Database (Denmark)

    Kläning, Ulla; Trumbetta, Susan L; Gottesman, Irving I

    2016-01-01

    We studied schizophrenia liability in a Danish population-based sample of 44 twin pairs (13 MZ, 31 DZ, SS plus OS) in order to replicate previous twin study findings using contemporary diagnostic criteria, to examine genetic liability shared between schizophrenia and other disorders, and to explore...... whether variance in schizophrenia liability attributable to environmental factors may have decreased with successive cohorts exposed to improvements in public health. ICD-10 diagnoses were determined by clinical interview. Although the best-fitting, most parsimonious biometric model of schizophrenia...... liability specified variance attributable to additive genetic and non-shared environmental factors, this model did not differ significantly from a model that also included non-additive genetic factors, consistent with recent interview-based twin studies. Schizophrenia showed strong genetic links to other...

  18. Potency and Characteristics of Bali Cattle Twin Birth

    OpenAIRE

    Utami, Anastasia Sischa Jati; Suyasa, I Nyoman

    2015-01-01

    Cattle twin birth is a rare occurrence that might be due to two factors, natural factors or external interventions such as the use of hormones. This study was aimed to determine to what extent Bali cattle were potential to deliver twin birth. Natural twin birth observation was conducted by survey method and data service while for super ovulation was conducted on 6 cows that never gave birth to twins. The Intervention method used a variety of hormonal preparations started with installing CIDR ...

  19. Twins and politics: political careers and political attitudes / twin research reviews: pair-bonding; facial expressivity in reared apart twins; educating multiples / stories that move and amaze us: a military funeral; a twins' reunion; Egyptian septuplets; rare occupations.

    Science.gov (United States)

    Segal, Nancy L

    2008-12-01

    Twins and twin research are providing fresh insights into the roots of political behavior. This topic is approached from dual perspectives: why some individuals choose to become politicians, and why individuals vary in their political attitudes and interests. Reviews of timely twin studies in the areas of pair-bonding, facial expressivity and education follow. Finally, some extraordinary events in the lives of twins and their families are revealed.

  20. Conjoined twins detected in the first trimester: A review

    Directory of Open Access Journals (Sweden)

    Chih-Ping Chen

    2011-12-01

    Full Text Available Conjoined twinning occurs in 1 in 100 sets of monozygotic twins, 1 in 50,000 gestations or 1 in 250,000 live births. With the advent of ultrasound technology, prenatal diagnosis of conjoined twins is possible. This article provides a comprehensive review of conjoined twins detected in the first trimester including fetal gender, maternal age, parity, types of fusion, related ultrasound abnormalities, perinatal outcome and association with assisted reproduction.

  1. Fetal MRI of conjoined twins who switched their relative positions

    Energy Technology Data Exchange (ETDEWEB)

    Huisman, Thierry A.G.M. [University Children' s Hospital, Department of Diagnostic Imaging, Zurich (Switzerland); Johns Hopkins Hospital, Division of Pediatric Radiology, Department of Radiology and Radiological Science, Baltimore, MD (United States); Arulrajah, Sahayini [Johns Hopkins Hospital, Division of Pediatric Radiology, Department of Radiology and Radiological Science, Baltimore, MD (United States); Meuli, Martin [University Children' s Hospital, Department of Surgery, Zurich (Switzerland); Brehmer, Ulrike [University Children' s Hospital, Department of Diagnostic Imaging, Zurich (Switzerland); Beinder, Ernst [University Hospital, Department of Obstetrics, Zurich (Switzerland)

    2010-03-15

    Conjoined twinning is a very rare occurrence with no genetic predisposition. Twisting of conjoined twins around the axis of their connecting tissue bridge, close to the third trimester, has not been previously reported. We describe a unique case of in utero twisting of conjoined omphalopagus twins who survived without any adverse effects. Fetal US and fetal MRI played a vital role in the diagnosis and perinatal management of these twins. (orig.)

  2. The structure of perfectionism: a twin study.

    Science.gov (United States)

    Tozzi, Federica; Aggen, Steven H; Neale, Benjamin M; Anderson, Charles B; Mazzeo, Suzanne E; Neale, Michael C; Bulik, Cynthia M

    2004-09-01

    Perfectionism may be a premorbid risk factor for eating disorders. Evidence of familial transmission suggests features of perfectionism may be genetically determined. This study examines the structure of perfectionism using classical twin design models. Independent (IP) and common (CP) pathway models are used to investigate the extent to which genetic and environmental factors can help to identify and differentiate three behavioral domains of perfectionism as measured by a shortened version of the Multidimensional Perfectionism Scale (MPS) [Frost et al. (1990). Cognit. Ther. Res. 14: 449-468]. Three of the original subscales were included: Personal standards (PS), Doubts about actions (DA), Concern over mistakes (CM). We studied a sample of 1022 paired and unpaired female twins from the Mid-Atlantic Twin Registry. MZ correlations were consistently higher than DZ twin correlations for all three composite subscales. The multivariate independent pathway model provided a better fit to the twin correlations then did the more parsimonious common pathway model suggesting the pattern of familial resemblance for the three subscales is not well characterized by a unidimensional perfectionism factor. CM phenotypic variance was completely accounted for by common heritability influences in both the IP and CP models. Based on the IP model results, there was evidence that PS and CM but not DA shared some common genetic effects, with DA and CM sharing some common environmental factors. These multivariate twin modeling results support conceptualizations of perfectionism as a multidimensional construct. The biometric structural results for the three subscales examined here suggest CM is the core feature of Perfectionism with DA and PS serving as indicators of CM. Although not the best fitting model, the common pathway model estimated this behavioral domain to be isomorphic with the construct of perfectionism. The better fitting independent pathway model provided evidence of non

  3. Urticaria in Monozygotic and Dizygotic Twins

    Directory of Open Access Journals (Sweden)

    Simon Francis Thomsen

    2012-01-01

    Full Text Available Aim. To identify risk factors for urticaria, to determine the relative proportion of the susceptibility to urticaria that is due to genetic factors in an adult clinical twin sample, and to further determine whether the genetic susceptibility to urticaria overlaps with the genetic susceptibility to atopic diseases. Methods. A total of 256 complete twin pairs and 63 single twins, who were selected from sibships with self-reported asthma via a questionnaire survey of 21,162 adult twins from the Danish Twin Registry, were clinically interviewed about a history of urticaria and examined for atopic diseases. Data were analysed with Cox proportional hazards regression and variance components models. Results. A total of 151 individuals (26% had a history of urticaria, whereas 24 (4% had had symptoms within the past year. Female sex, HR=2.09 (1.46–2.99, P=0.000; hay fever, HR=1.92 (1.36–2.72, P=0.000; and atopic dermatitis, HR=1.44 (1.02–2.06, P=0.041 were significant risk factors for urticaria. After adjustment for sex and age at onset of urticaria in the index twin, the risk of urticaria was increased in MZ cotwins relative to DZ cotwins, HR=1.42 (0.63–3.18, P=0.394. Genetic factors explained 45% (16–74%, P=0.005, of the variation in susceptibility to urticaria. The genetic correlation between urticaria and hay fever was 0.45 (0.01–0.89, P=0.040. Conclusions. Susceptibility to urticaria is partly determined by genetic factors. Urticaria is more common in women, and in subjects with hay fever and atopic dermatitis, and shares genetic variance with hay fever.

  4. Marital status and twins' health and behavior: an analysis of middle-aged Danish twins

    DEFF Research Database (Denmark)

    Osler, Merete; McGue, Matt; Lund, Rikke

    2008-01-01

    OBJECTIVE: To disentangle the influences on health of selection processes related to genetic and rearing environmental factors from factors related to marriage benefits. We compared health status among same-sex male and female twin pairs who lived together during childhood and were discordant...... or concordant on adult marital status. METHODS: A cross-sectional survey of a random sample of middle-aged Danish twins was conducted in 1998 to 1999. This study included 1175 same-sex twin pairs (52.5% monozygotic (MZ) and 47.5% dizygotic (DZ)). Data were obtained on adult marital status and on height, body...

  5. Twin heart with a fused atria and separate ventricles in conjoined twins.

    Science.gov (United States)

    Ambar, Sameer Suresh; Halkati, Prabhu C; Patted, Suresh V; Yavagal, St

    2010-07-01

    One of the most interesting congenital malformations is that of conjoined twins. We report echocardiographic features of twin heart in dicephalus, tribrachius, dispinous, thoracoomphalopagus twin. It showed two hearts fused at atrial level. Right-sided heart had single atrial chamber with a single ventricle. A single great vessel, aorta, originated from it. Left-sided heart was well developed with two atria and two ventricles. There was a small mid muscular ventricular septal defect and a small patent ductus arteriosus. Great arteries had normal origins.

  6. Effect of friction on rolling tire-pavement interaction

    Science.gov (United States)

    2010-11-01

    In this research, a three-dimensional (3-D) tire-pavement interaction model is developed using FEM to analyze the tire-pavement contact stress distributions at various rolling conditions (free rolling, braking/accelerating, and cornering). In additio...

  7. Conjoined twins: scientific cinema and Pavlovian physiology.

    Science.gov (United States)

    Krementsov, Nikolai

    2015-01-01

    Through the lens of a 1957 documentary film, "Neural and humoral factors in the regulation of bodily functions (research on conjoined twins)," produced by the USSR Academy of Medical Sciences, this essay traces the entwined histories of Soviet physiology, studies of conjoined twins and scientific cinema. It examines the role of Ivan Pavlov and his students, including Leonid Voskresenkii, Dmitrii Fursikov and Petr Anokhin, in the development of "scientific film" as a particular cinematographic genre in Soviet Russia and explores numerous puzzles hidden behind the film's striking visuals. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  8. Cord entanglement in monoamniotic twin pregnancies

    DEFF Research Database (Denmark)

    Lyndrup, J; Schouenborg, Lars Øland

    1987-01-01

    Monoamniotic twin pregnancy involves a heavy risk of fatal umbilical cord entanglement. Two cases are reported. In the first case, both twins were found dead in the 36th week, and the monoamnionicity was recognized at birth. In the second case, the monoamnionicity was discovered during an ultraso...... an ultrasound examination, and cord entanglement was suspected in the 35th week on the basis of a non-stress test (NST) with variable decelerations. Cesarean section was performed and two healthy children were delivered....

  9. Rainbow correlation imaging with macroscopic twin beam

    Science.gov (United States)

    Allevi, Alessia; Bondani, Maria

    2017-06-01

    We present the implementation of a correlation-imaging protocol that exploits both the spatial and spectral correlations of macroscopic twin-beam states generated by parametric downconversion. In particular, the spectral resolution of an imaging spectrometer coupled to an EMCCD camera is used in a proof-of-principle experiment to encrypt and decrypt a simple code to be transmitted between two parties. In order to optimize the trade-off between visibility and resolution, we provide the characterization of the correlation images as a function of the spatio-spectral properties of twin beams generated at different pump power values.

  10. Tool For Robotic Resistive Roll Welding

    Science.gov (United States)

    Gilber, Jeffrey L.

    1991-01-01

    Roll-welding attachment for robot simple, inexpensive device incorporating modified commercial resistance-welding gun. Modified welding gun easily attaches to end effector of robot. Robot applies welding force and moves electrode wheel along prescribed path. Resistance-welding current starts and stops automatically according to force exerted against workpiece. Used to apply brazing foil to workpiece.

  11. Running-in of rolling contacts

    NARCIS (Netherlands)

    Jamari, Jamari

    2006-01-01

    This thesis deals with running-in of the pure rolling contact situation operating in the boundary lubrication regime, so that normal plastic deformation due to the contact between asperities is the main aspect. The change of the surface topography during the running-in process and the run-in

  12. Improved measurement methods for railway rolling noise

    NARCIS (Netherlands)

    Dittrich, M.G.; Janssens, M.H.A.

    2000-01-01

    Some of the issues related to railway noise type testing are discussed and potential improvements to existing procedures are put forward. New and improved methods that also go beyond the scope of type testing are presented that help to characterize and analyze rolling noise more accurately. These

  13. Statistical prediction of parametric roll using FORM

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Choi, Ju-hyuck; Nielsen, Ulrik Dam

    2017-01-01

    Previous research has shown that the First Order Reliability Method (FORM) can be an efficient method for estimation of outcrossing rates and extreme value statistics for stationary stochastic processes. This is so also for bifurcation type of processes like parametric roll of ships. The present...

  14. The riddles of rock and roll

    NARCIS (Netherlands)

    L.J.M. d' Anjou (Leo)

    2003-01-01

    textabstractRock and roll has often been equated with rebellion. The genre, though, is just a form of popular music and many of the important players in the game of promoting it were, like the saying goes, only in it for the money. As a rule, music like that will be supportive of the social order

  15. Large Scale Evaluation fo Nickel Aluminide Rolls

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-01

    This completed project was a joint effort between Oak Ridge National Laboratory and Bethlehem Steel (now Mittal Steel) to demonstrate the effectiveness of using nickel aluminide intermetallic alloy rolls as part of an updated, energy-efficient, commercial annealing furnace system.

  16. Detection of Parametric Roll on Ships

    DEFF Research Database (Denmark)

    Galeazzi, Roberto; Blanke, Mogens; Poulsen, Niels Kjølstad

    2012-01-01

    Recent years have shown several incidents with dramatic damage on container vessels caused by parametric resonance. When the resonance starts, the roll oscillation at a sub-harmonic frequency of the wave excitation may be completely unexpected. Timely warning about the onset of the resonance...... on experimental data from towing tank tests and data from a container ship passing an Atlantic storm....

  17. Film Thickness in Grease Lubricated Rolling Bearings

    NARCIS (Netherlands)

    Lugt, Piet M.; Van Zoelen, M. T.; Venner, C. H.; Lugt, Piet M.

    2012-01-01

    In this chapter the theory from Chapter 9 will be applied to rolling bearings. The thin layer flow equations are used to describe the tangential and normal flow due to centrifugal forces. The interaction between the various contacts on inner ring and outer ring will be described followed by the

  18. Kommunernes rolle i klimaomstilling af byggeriet

    DEFF Research Database (Denmark)

    Holm, Jesper; Stauning, Inger; Søndergård, Bent

    2014-01-01

    -tekniske systemer. Baseret på studier af fire danske kommuner (Sønderborg, Albertslund, Egedal og Næstved) undersøges potentialer og virkemidler, som kommunerne kan benytte i deres rolle som strategiske aktører i udviklingen af sådanne situerede transitionssteder. Kapitlet viser en mangfoldighed i måder, hvorpå...

  19. Challenges in the management of twin pregnancy discordant for ...

    African Journals Online (AJOL)

    Challenges in the management of twin pregnancy discordant for abnormality. CJM Stewart. Abstract. Prenatal diagnosis in the setting of a twin pregnancy is challenging. The frequency of abnormalities is higher in twin than in singleton pregnancies, particularly in monozygotic pregnancies. The finding of an abnormality in ...

  20. Twin pregnancy possibly associated with high semen quality

    DEFF Research Database (Denmark)

    Asklund, Camilla; Jensen, Tina Kold; Jørgensen, Niels

    2007-01-01

    BACKGROUND: Recent studies found an association between a long waiting time to pregnancy (TTP) and reduced probability of twinning and a reduced dizygotic (DZ) twinning rate in subfertile men. However, it remains unsolved whether semen quality is associated with twin offspring. We therefore studied...

  1. Dicephalus dipus tetrabrachius conjoined twins of Zaria: Case report ...

    African Journals Online (AJOL)

    2012-04-20

    Apr 20, 2012 ... One of the most interesting congenital malformations to manage is a conjoined twin. Conjoined twins are rare occurrences in obstetric/pediatric practice. More commonly known as Siamese twins, this phenomenon is shrouded in mystery and considered a curiosity by general public. Current technology is ...

  2. Interaction effects on hydrodynamic characteristics of twin rudders

    NARCIS (Netherlands)

    Liu, J.; Hekkenberg, R.G.

    2016-01-01

    In order to reach the required manoeuvrability, inland vessels often use twin rudders, but the interaction effects are poorly understood. To achieve a proper configuration, this paper applies 2D RANS simulations to analyse the interaction effects on the twin-rudder hydrodynamics. Various twin-rudder

  3. Dicephalus dibrachius dipus conjoined twins in a triplet pregnancy ...

    African Journals Online (AJOL)

    Conjoined twins occurring in a triplet pregnancy is a rare occurrence. We present a case of undiagnosed dicephalic conjoined twins occurring in a multigravida with triple pregnancy delivered by caesarian section. The anatomical and pathologic findings in these twins after their demise are described with a brief review of ...

  4. Twins with omphalocele in Denmark (1970-1989)

    DEFF Research Database (Denmark)

    Bugge, Merete

    2010-01-01

    Seven pairs of twins, two monozygotic (MZ), two dizygotic (DZ), and three like-sex pairs of unknown zygosity are described. The twin pairs were all discordant for omphalocele except for one pair of conjoined twins. The 8 infants with omphalocele represent 3.1% of the 253 infants with omphalocele...

  5. to-twin transfusion after fetoscopic laser surgery

    African Journals Online (AJOL)

    c and Caroline C. Hulsker a. Twin-to-twin transfusion syndrome (TTTS) occurs in 10% of monochorionic twin pregnancies, and can lead to a variety of complications due to imbalanced blood flow across placental vascular communications. In this report, we describe a case of intestinal injury in TTTS after fetoscopic.

  6. Identical twins with “mirror image” anisometropia and esotropia

    Directory of Open Access Journals (Sweden)

    Stanković-Babić Gordana

    2011-01-01

    Full Text Available Introduction. Identical twins account for 0.2% of the world population and 8% of all twins. A “mirror image” variation can be found in 25% of identical twins. Studies of twins assume a special place in human genetics due to the possibility of comparing genetic and other factors. We present two pairs of identical male twins with mirror-image astigmatism and esotropia. Case Outline. The first was a pair of twelve-year old identical twins with “mirror image” myopic astigmatism. The Twin 1 had myopic astigmatism in the right eye, while the Twin 2 was affected by the left eye myopic astigmatism. The second was a pair of six-year old identical twins with esotropia and hypermetropic astigmatism. The Twin 1 had esotropia in the left eye, while the right eye was affected in the Twin 2. Esotropia was surgically corrected. Conclusion. In this study we pointed to the role of genetic factors in the development of refractive error, as well as the type of strabismus. Refraction anomalies (myopia, hypermetropia and astigmatism are complex heterogeneous disorders and ideal for genetic investigation. The knowledge of genetic mechanisms involved in refractive error susceptibility may allow treatment to prevent progression or to further examine gene-environment interactions. We hope that this paper will initiate further investigation of refraction anomalies in twins and future multicentre studies, which, to our knowledge, have not been conducted in our country so far.

  7. Obstetric outcome of twin pregnancies in Jos, Nigeria | Mutihir ...

    African Journals Online (AJOL)

    Obstetric outcome of twin pregnancies in Jos, Nigeria. JT Mutihir, VC Pam. Abstract. Objectives: The objectives of the study were to determine the incidence, maternal and foetal outcome of twin delivery in Jos, Nigeria. Methodology: All consecutive twin deliveries between August 2003 and November 2004 were studied.

  8. Pelvic ventral hernia repair in a pygopagus conjoint twin | Bhullar ...

    African Journals Online (AJOL)

    Pelvic ventral hernia repair in a surviving conjoint twin with multiple congenital anomalies that make surgery a challenge. Conjoint twins are a rare. The incidence is reported to be in the range of 1/50 000 to 1/100 000 live births. Of the conjoint twins, 40% are stillborn and an additional one-third die within 24 h of birth.

  9. Left-handedness in twins: genes or environment?

    NARCIS (Netherlands)

    Orlebeke, J. F.; Knol, D. L.; Koopmans, J. R.; Boomsma, D. I.; Bleker, O. P.

    1996-01-01

    Twin family data can cast light on the longstanding problem about the influences of genes and environment on the etiology of left-handedness. Therefore, hand preference was assessed in 1700 adolescent twin pairs and their parents. Left-handedness (LH) appeared not significantly enhanced among twins

  10. A note on twin-singleton differences in asthma

    DEFF Research Database (Denmark)

    Thomsen, Simon Francis; Kyvik, Kirsten Ohm; Backer, Vibeke

    2008-01-01

    Twins constitute a valuable resource for genetic studies of asthma. However, critics argue that twins are 'special' in terms of prenatal environment and upbringing and therefore nonrepresentative. In respect to asthma a small range of studies report differential morbidity in twins compared with s...

  11. Perinatal Mortality Among Twins In Lagos University Teaching ...

    African Journals Online (AJOL)

    Background: Perinatal mortality rate is reported to be higher in twins than in singletons. More than two decades ago, Abudu and Agarin reported a twinning rate of 21.1/1000 maternities and perinatal mortality rate of 142.6/1000 among twins in Lagos. Objective: To determine the current perinatal mortality rate and risk factors ...

  12. Discordant HIV-1 Infection in Dizygotic Twins: Case Report and ...

    African Journals Online (AJOL)

    First-born twins are at a four-fold risk of acquiring HIV infection if delivered by caesarean section. A female second twin delivered by caesarean section presented at the age of 14 months with features of HIV/AIDS. She died four months later of full blown AIDS. The first twin, a male, who was delivered vaginally, ...

  13. Trisomy 13 in monozygotic twins discordant for major congenital anomalies.

    OpenAIRE

    Naor, N; Amir, Y; Cohen, T; Davidson, S

    1987-01-01

    The occurrence of trisomy 13 in twins is very rare. We report a pair of genotypically identical twins with trisomy 13 discordant for major anomalies. This case contributes to the already published data on the contribution of non-genetic factors to the aetiology of congenital malformations in monozygotic twins.

  14. Process optimization of graphene growth in a roll-to-roll plasma CVD system

    Science.gov (United States)

    Alrefae, Majed A.; Kumar, Anurag; Pandita, Piyush; Candadai, Aaditya; Bilionis, Ilias; Fisher, Timothy S.

    2017-11-01

    A systematic approach to mass-production of graphene and other 2D materials is essential for current and future technological applications. By combining a sequential statistical design of experiments with in-situ process monitoring, we demonstrate a method to optimize graphene growth on copper foil in a roll-to-roll rf plasma chemical vapor deposition system. Data-driven predictive models show that gas pressure, nitrogen, oxygen, and plasma power are the main process parameters affecting the quality of graphene. Furthermore, results from in-situ optical emission spectroscopy reveal a positive correlation of CH radical to high quality of graphene, whereas O and H atoms, Ar+ ion, and C2 and CN radicals negatively correlate to quality. This work demonstrates the deposition of graphene on copper foil at 1 m/min, a scale suitable for large-scale production. The techniques described here can be extended to other 2D materials and roll-to-roll manufacturing processes.

  15. A new transducer for local load measurements of friction and roll pressure in cold flat rolling

    DEFF Research Database (Denmark)

    Lagergren, J.; Wanheim, Tarras; Precz, W.

    2006-01-01

    The only way to establish the true rolling pressure and the true friction condition in cold rolling is to conduct measurements in the roll bite. A new transducer design is therefore proposed, in order to overcome problems in previous measurements in the past 70 years. The new idea is to increase...... the contact surface of the transducer, to be larger than the arc of contact. This is in contrast to the smaller and smaller contact pin design that has been prevailing. The measurements were conducted during cold dry rolling of both copper strips and stainless steel strips in a pilot mill. The recordings were...... selected from a steady state with no disturbance from the material flow. The transducer was able to simultaneously measure both the normal pressure and the friction stress. An estimation of the coefficient of friction was accordingly performed. The new transducer works very well, it was seen to be robust...

  16. Rapid Prototyping of Slot Die Devices for Roll to Roll Production of EL Fibers.

    Science.gov (United States)

    Bellingham, Alyssa; Bromhead, Nicholas; Fontecchio, Adam

    2017-05-29

    There is a growing interest in fibers supporting optoelectrical properties for textile and wearable display applications. Solution-processed electroluminescent (EL) material systems can be continuously deposited onto fiber or yarn substrates in a roll-to-roll process, making it easy to scale manufacturing. It is important to have precise control over layer deposition to achieve uniform and reliable light emission from these EL fibers. Slot-die coating offers this control and increases the rate of EL fiber production. Here, we report a highly adaptable, cost-effective 3D printing model for developing slot dies used in automatic coating systems. The resulting slot-die coating system enables rapid, reliable production of alternating current powder-based EL (ACPEL) fibers and can be adapted for many material systems. The benefits of this system over dip-coating for roll-to-roll production of EL fibers are demonstrated in this work.

  17. Effect of Rolling Resistance in Dem Models With Spherical Bodies

    Directory of Open Access Journals (Sweden)

    Dubina Radek

    2016-12-01

    Full Text Available The rolling resistance is an artificial moment arising on the contact of two discrete elements which mimics resistance of two grains of complex shape in contact rolling relatively to each other. The paper investigates the influence of rolling resistance on behaviour of an assembly of spherical discrete elements. Besides the resistance to rolling, the contacts between spherical particles obey the Hertzian law in normal straining and Coulomb model of friction in shear.

  18. Multi objective Taguchi optimization approach for resistance spot welding of cold rolled TWIP steel sheets

    Science.gov (United States)

    Tutar, Mumin; Aydin, Hakan; Bayram, Ali

    2017-08-01

    Formability and energy absorption capability of a steel sheet are highly desirable properties in manufacturing components for automotive applications. TWinning Induced Plastisity (TWIP) steels are, new generation high Mn alloyed steels, attractive for the automotive industry due to its outstanding elongation (%40-45) and tensile strength (~1000MPa). So, TWIP steels provide excellent formability and energy absorption capability. Another required property from the steel sheets is suitability for manufacturing methods such as welding. The use of the steel sheets in the automotive applications inevitably involves welding. Considering that there are 3000-5000 welded spots on a vehicle, it can be interpreted that one of the most important manufacturing method is Resistance Spot Welding (RSW) for the automotive industry. In this study; firstly, TWIP steel sheet were cold rolled to 15% reduction in thickness. Then, the cold rolled TWIP steel sheets were welded with RSW method. The welding parameters (welding current, welding time and electrode force) were optimized for maximizing the peak tensile shear load and minimizing the indentation of the joints using a Taguchi L9 orthogonal array. The effect of welding parameters was also evaluated by examining the signal-to-noise ratio and analysis of variance (ANOVA) results.

  19. 40 CFR 467.10 - Applicability; description of the rolling with neat oils subcategory.

    Science.gov (United States)

    2010-07-01

    ... rolling with neat oils subcategory. 467.10 Section 467.10 Protection of Environment ENVIRONMENTAL... Rolling With Neat Oils Subcategory § 467.10 Applicability; description of the rolling with neat oils... the rolling with neat oils subcategory. ...

  20. Roll compaction and granulation system for nuclear fuel material

    International Nuclear Information System (INIS)

    Goldmann, L.H. Jr.; Holley, C.C.

    1981-01-01

    A roll compaction and roll granulation system has been designed and fabricated to replace conventional preslugging and crushing operations typically used in the fabrication of mixed oxide nuclear fuel pellets. This equipment will be of maintenance advantage with only the compaction and granulation rolls inside containment. The prototype is being tested and the results will be reported within a year

  1. Determination of residual stresses in roll compacted titanium strips

    CSIR Research Space (South Africa)

    Mothosi, KL

    2017-01-01

    Full Text Available induced during roll compaction of titanium strips were measured for strips of different densities. The different densities were achieved by rolling two different particle size (100 and 325 mesh) titanium powders varying the roll gap (0.1, 0.3 and 0.5 mm...

  2. Metallurgical analysis of spalled work roll of hot strip mill

    International Nuclear Information System (INIS)

    Khan, M.M.; Khan, M.A.

    1993-01-01

    In this study failure analysis of four work roll of the Hot Strip Mill is carried out. The microstructure is correlated with the chemical composition of shell and roll-life. It was concluded that for the longer service of the roll, cementite, graphite and martensite should be balanced (as per working requirement of the mill). (author)

  3. Assessment of friction between a rolling cylindrical element and a ...

    African Journals Online (AJOL)

    A cost-effective friction coefficient measuring technique was developed and tested. The technique involved the mounting of two sensing elements on the surface of rolls, in a manner that sought to measure simultaneously the normal and the tangential stresses during rolling. The instrumented roll termed “SGRoll” was ...

  4. Lubrication in cold rolling : Numerical simulation using multigrid techniques

    NARCIS (Netherlands)

    Lugt, Pieter Martin

    1992-01-01

    In the cold rolling process a lubricant is applied on the rolls and/or the strip mate­rial. Due to the velocities of the rolls and the strip, part of the lubricant is sheared into the contact causing, amongst others, a reduction of the friction. In this thesis a physical-mathematical model is

  5. Chaotic travelling rolls in Rayleigh–Bénard convection

    Indian Academy of Sciences (India)

    The lateral shift of the rolls may lead to a global flow reversal of the convective motion. The chaotic travelling rolls are observed in simulations with free-slip as well as no-slip boundary conditions on the velocity field. We show that the travelling rolls and the flow reversal are due to an interplay between the real and imaginary ...

  6. Rolling Force Prediction in Heavy Plate Rolling Based on Uniform Differential Neural Network

    Directory of Open Access Journals (Sweden)

    Fei Zhang

    2016-01-01

    Full Text Available Accurate prediction of the rolling force is critical to assuring the quality of the final product in steel manufacturing. Exit thickness of plate for each pass is calculated from roll gap, mill spring, and predicted roll force. Ideal pass scheduling is dependent on a precise prediction of the roll force in each pass. This paper will introduce a concept that allows obtaining the material model parameters directly from the rolling process on an industrial scale by the uniform differential neural network. On the basis of the characteristics that the uniform distribution can fully characterize the solution space and enhance the diversity of the population, uniformity research on differential evolution operator is made to get improved crossover with uniform distribution. When its original function is transferred with a transfer function, the uniform differential evolution algorithms can quickly solve complex optimization problems. Neural network structure and weights threshold are optimized by uniform differential evolution algorithm, and a uniform differential neural network is formed to improve rolling force prediction accuracy in process control system.

  7. High resolution patterning for flexible electronics via roll-to-roll nanoimprint lithography

    Science.gov (United States)

    Sabik, Sami; de Riet, Joris; Yakimets, Iryna; Smits, Edsger

    2014-03-01

    Flexible electronics is a growing field and is currently maturing in applications such as displays, smart packaging, organic light-emitting diodes and organic photovoltaic cells. In order to process on flexible substrates at high throughput and large areas, novel patterning techniques will be essential. Conventional optical lithography is limited in throughput as well as resolution, and requires several alignment steps to generate multi-layered patterns, required for applications such as thin-film transistors. It therefore remains a complex and expensive process. Nanoimprint lithography is an emerging alternative to optical lithography, demonstrating patterning capabilities over a wide range of resolutions, from several microns down to a few nanometres. For display applications, nanoimprint lithography can be used to pattern various layers. Micron sized thin-film transistors for backplane can be fabricated where a self-aligned geometry is used to decrease the number of alignment steps, and increase the overlay accuracy. In addition, nano-structures can be used for optical applications such as anti-reflective surfaces and nano patterned transparent electrodes. Imprint lithography is a fully roll-to-roll compatible process and enables large area and high throughput fabrication for flexible electronics. In this paper we discuss the possibilities and the challenges of large area patterning by roll-to-roll nanoimprint lithography, reviewing micron and nano sized structures realized on our roll-to-roll equipment. Nano patterned transparent electrodes, moth-eye antireflective coatings, and multilevel structures will be covered.

  8. High prevalence of same-sex twins in patients with cloacal exstrophy: Support for embryological association with monozygotic twinning.

    Science.gov (United States)

    Fullerton, Brenna S; Sparks, Eric A; Hall, Amber M; Velazco, Cristine S; Modi, Biren P; Lund, Dennis P; Jaksic, Tom; Hendren, W Hardy

    2017-05-01

    Previous studies have hypothesized that cloacal exstrophy may be caused by errors early in embryological development related to monozygotic twinning. This study reports the prevalence of twins in a large cohort of patients with cloacal exstrophy. Patients with cloacal exstrophy treated 1974-2015 were reviewed for reports of multiple gestation or conjoined twinning. The genetic sex of the patient and their twin, and any mention of anomaly in the twin were recorded. Neither placental exam nor genetic testing results were available to definitively determine zygosity. Of 71 patients, 10 had a live born twin (14%), all of whom were of the same genetic sex as the affected patient. One additional patient's twin suffered intrauterine fetal demise, and another patient had a conjoined heteropagus twin. None of the twins were affected by exstrophy-epispadias complex. The rate of twin birth in this cohort was 4.4-7.7 higher than that reported by the Centers for Disease Control in the general population time period (P<0.001), with a striking preponderance of same-sex pairs. The highly significant prevalence of same-sex twin pairs within this cohort supports the hypothesis that the embryogenesis of cloacal exstrophy may be related to errors in monozygotic twinning. 2b. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Infant mortality in twin pregnancies following in-utero demise of the co-twin

    Directory of Open Access Journals (Sweden)

    Boubakari Ibrahimou

    2015-09-01

    Conclusions: Risks for all mortality types were lower among converted co-twins than their unconverted or same-quantile counterparts. The lower neonatal and higher post-neonatal mortality among black require future research.

  10. Twin-twin transfusion syndrome presenting as polyhydramnios in both fetuses secondary to spontaneous microseptostomy.

    Science.gov (United States)

    Hackney, David N; Khalek, Nahla; Moldenhauer, Julie; Ozcan, Tulin

    2013-10-01

    The presence of polyhydramnios and oligohydramnios is pathognomonic for twin-twin transfusion syndrome (TTTS). However, polyhydramnios of both twins can exist in TTTS in the setting of a septostomy of the dividing membrane. In prior reported cases of dual polyhydramnios TTTS, the septostomy was identified through either ultrasound or fetoscopy thus helping to establish the diagnosis of TTTS with an unusual presentation. The presented case is a set of monochorionic, diamniotic twins who presented initially with dual polyhydramnios. Subsequent ultrasound and clinical and pathologic findings were otherwise consistent with TTTS. Unlike prior reported cases, a septostomy of the dividing membrane was never identified with ultrasound or even on post delivery placental examination. However, microseptostomies were demonstrated due to the transfer of indigo carmine between the amniotic sacs at amniocentesis. Thus in the setting of TTTS concern, the diagnosis should be considered with dual polyhydramnios even if a septostomy cannot be identified.

  11. Nature versus nurture: identical twins and bariatric surgery.

    Science.gov (United States)

    Hagedorn, Judith C; Morton, John M

    2007-06-01

    Genetics and environment both play a role in weight maintenance. Twin studies may help clarify the influence of nature vs nurture in weight loss. We present the largest U.S. experience with monozygotic (MZ) twins undergoing bariatric surgery. We retrospectively reviewed the charts of four sets of MZ twins who underwent Roux-en-Y gastric bypass (RYGBP) surgery and laparoscopic adjustable gastric band (LAGB) placement at three different institutions. BMI and co-morbidities were examined pre- and postoperatively, and laboratory values were recorded. All four sets of twins are female, live together, and have similar professions. Twin cohort 1 had near identical weight loss patterns after open RYGBP surgery in 1996 (preop 146/142 kg; 2 years 82/82; and 10 years 108/107). Twin cohort 1 also both underwent cholecystectomies within the first year postoperatively. Twin cohort 2 underwent laparoscopic RYGBP surgery and also required cholecystectomies in the first postoperative year. Cohort 2 also experienced nearly identical weight loss at 1 year (36.7% vs 37.0% BMI loss). Twin cohort 3 underwent LAGB placement with two different surgeons with differing amounts of weight loss at 6 months (6.5% vs 15.7% BMI loss). Finally, twin cohort 4 underwent laparoscopic RYGBP with 2-year BMI loss of 39% vs 34%. In twin cohort 4, the twin who lost less weight lived apart from her twin and extended family, and her weight loss was less than the twin living with her family. Two sets of MZ twins had identical responses to bariatric surgery. The other two sets of identical twins had differential weight loss results, possibly due to differences in surgical approach and social support. While genetics do exert a strong influence on weight loss and maintenance, this case series demonstrates the potential effect of social support and postoperative management upon postoperative weight loss in the presence of identical genetics.

  12. Relations and interactions between twinning and grain boundaries in hexagonal close-packed structures

    Science.gov (United States)

    Barrett, Christopher Duncan

    Improving the formability and crashworthiness of wrought magnesium alloys are the two biggest challenges in current magnesium technology. Magnesium is the best material candidate for enabling required improvements in fuel economy of combustion engines and increases in ranges of electric vehicles. In hexagonal closed-packed (HCP) structures, effects of grain size/morphology and crystallographic texture are particularly important. Prior research has established a general understanding of the dependences of strength and strain anisotropy on grain morphology and texture. Unfortunately, deformation, recrystallization, and grain growth strategies that control the microstructures and textures of cubic metals and alloys have not generally worked for HCPs. For example, in Magnesium, the deformation texture induced by primary forming operations (rolling, extrusion, etc.) is not randomized by recrystallization and may strengthen during grain growth. A strong texture reduces formability during secondary forming (stamping, bending, hemming etc.) Thus, the inability to randomize texture has impeded the implementation of magnesium alloys in engineering applications. When rare earth solutes are added to magnesium alloys, distinct new textures are derived. However, `rare earth texture' derivation remains insufficiently explained. Currently, it is hypothesized that unknown mechanisms of alloy processing are at work, arising from the effects of grain boundary intrinsic defect structures on microstructural evolution. This dissertation is a comprehensive attempt to identify formal methodologies of analyzing the behavior of grain boundaries in magnesium. We focus particularly on twin boundaries and asymmetric tilt grain boundaries using molecular dynamics. We begin by exploring twin nucleation in magnesium single crystals, elucidating effects of heterogeneities on twin nucleation and their relationships with concurrent slip. These efforts highlighted the necessity of imperfections to

  13. A genome wide linkage scan for dizygotic twinning in 525 families of mothers of dizygotic twins.

    Science.gov (United States)

    Painter, Jodie N; Willemsen, Gonneke; Nyholt, Dale; Hoekstra, Chantal; Duffy, David L; Henders, Anjali K; Wallace, Leanne; Healey, Sue; Cannon-Albright, Lisa A; Skolnick, Mark; Martin, Nicholas G; Boomsma, Dorret I; Montgomery, Grant W

    2010-06-01

    The tendency to conceive dizygotic (DZ) twins is a complex trait influenced by genetic and environmental factors. To search for new candidate loci for twinning, we conducted a genome-wide linkage scan in 525 families using microsatellite and single nucleotide polymorphism marker panels. Non-parametric linkage analyses, including 523 families containing a total of 1115 mothers of DZ twins (MODZT) from Australia and New Zealand (ANZ) and The Netherlands (NL), produced four linkage peaks above the threshold for suggestive linkage, including a highly suggestive peak at the extreme telomeric end of chromosome 6 with an exponential logarithm of odds [(exp)LOD] score of 2.813 (P = 0.0002). Since the DZ twinning rate increases steeply with maternal age independent of genetic effects, we also investigated linkage including only families where at least one MODZT gave birth to her first set of twins before the age of 30. These analyses produced a maximum expLOD score of 2.718 (P = 0.0002), largely due to linkage signal from the ANZ cohort, however, ordered subset analyses indicated this result is most likely a chance finding in the combined dataset. Linkage analyses were also performed for two large DZ twinning families from the USA, one of which produced a peak on chromosome 2 in the region of two potential candidate genes. Sequencing of FSHR and FIGLA, along with INHBB in MODZTs from two large NL families with family specific linkage peaks directly over this gene, revealed a potentially functional variant in the 5' untranslated region of FSHR that segregated with the DZ twinning phenotype in the Utah family. Our data provide further evidence for complex inheritance of familial DZ twinning.

  14. Characterization of the matrix-twin interface of a (1 0 -1 2) twin during growth

    Czech Academy of Sciences Publication Activity Database

    Ostapovets, Andriy; Serra, A.

    2014-01-01

    Roč. 94, č. 25 (2014), s. 2827-2839 ISSN 1478-6443 R&D Projects: GA MŠk(CZ) EE2.3.30.0063 Grant - others:Catalan Government(ES) AGAUR2014SGR 1644; Spanish Secretariat of Research , Development and Innovation (ES) FIS2012-39433-C02-02 Institutional support: RVO:68081723 Keywords : twinning * twin boundaries * disconnections Subject RIV: BM - Solid Matter Physics ; Magnetism; BM - Solid Matter Physics ; Magnetism (FZU-D)

  15. Comparison of academic performance of twins and singletons in adolescence

    DEFF Research Database (Denmark)

    Christensen, Kaare; Petersen, Inge; Skytthe, Axel

    2006-01-01

    OBJECTIVES: To determine whether twins in recent cohorts show similar academic performance in adolescence to singletons and to test the effect of birth weight on academic performance in twins and singletons. DESIGN: Follow-up study. SETTING: Denmark. PARTICIPANTS: All twins (n=3411) and a 5% random...... increase in birth weight. CONCLUSIONS: Although older cohorts of twins have been found to have lower mean IQ scores than singletons, twins in recent Danish cohorts show similar academic performance in adolescence to that of singletons. Birth weight has a minimal effect on academic performance in recent...

  16. The importance of secondary and ternary twinning in compressed Ti

    International Nuclear Information System (INIS)

    Tirry, W.; Nixon, M.; Cazacu, O.; Coghe, F.; Rabet, L.

    2011-01-01

    Twin formation during uniaxial compression of high-purity α-Ti at room temperature is investigated for both quasi-static and dynamic conditions using electron backscatter diffraction techniques. The initial texture is favorable for {101-bar 2} twinning, yet it is observed that secondary and ternary twins occur for both strain rates, showing a higher propensity in the dynamic case. While secondary twins may explain the difference in texture change and strain hardening between the two loading conditions, the ternary twins mainly contribute to grain fractioning.

  17. Prenatal Sonographic Diagnosis of Acardiac Twins

    International Nuclear Information System (INIS)

    Kim, Jeong Ah; Song, Mi Jin

    2006-01-01

    This study was performed to present the prenatal sonographic findings and the associated abnormalities of acardiac twins. Seven cases of acardiac twins were reviewed retrospectively. Prenatal ultrasonography was performed in all patients at a gestational age between 12 and 27 weeks (mean 17.6 weeks). Autopsy was performed in four cases. The sonographic and autopsy findings were reviewed to report the associated abnormalities of the acardiac and donor fetuses. The diagnosis of acardiac twins was made on the basis of ultrasonography (n=6) or autopsy (n=1). The associated abnormalities of the acardiac fetuses were single umbilical artery (SUA) (n=5), abdominal wall defect (n=4), club feet (n=4), scoliosis (n=1), cleft lip and palate (n=1), digital anomaly (n=1), and umbilical cord cyst (n=1). In four of the donor fetuses, sonographic abnormalities were found. Autopsy was performed in three of the four cases to reveal hydropic change (n=2), diaphragmatic hernia (n=1) and multiple structural abnormalities of interventricular septal defect, polydactyly, club feet and SUA (n=1). Intrauterine fetal death occurred in five donors and follow-up was lost in the remaining two. Meticulous sonography enables the diagnosis of acardiac twins at an early gestational age and can reveal the associated abnormalities of the donor fetus as well as the acardiac fetus

  18. Hyperpolarizability studies of some nonconjugated twin donor ...

    Indian Academy of Sciences (India)

    Administrator

    Nonlinear optics; oscillator strength; optical gap; polarizability. 1. Introduction. The design of materials with large ... strength and optical gaps of the twin donor acceptor sys- tems by varying the number of alkyl groups .... The microscopic first hyperpolarizability, β is a 3rd rank tensor, which has 27 tensor components.

  19. Identical Twin Primigravid Sisters -Spontaneous Labour and ...

    African Journals Online (AJOL)

    We report 2 cases of identical twin sisters, the older sibling getting married 14 months earlier but both got pregnant for their first child at about the same time and were managed by the same Obstetrician and fell into spontaneous labour within a few hours of each other. Both were delivered by emergency caesarean section ...

  20. Managing a Live Advanced Abdominal Twin Pregnancy

    African Journals Online (AJOL)

    examination revealed a closed, uneffaced, firm and posterior ... Advanced abdominal pregnancies with live twin fetuses are extremely rare and are misdiagnosed ... operating room. Leaving the placenta in situ is the best way to deal with abdominal pregnancy, based on previous experience and review of the literature.

  1. INTEGRATED TWIN TOWERS DAN ISLAMISASI ILMU

    Directory of Open Access Journals (Sweden)

    Syaifuddin Syaifuddin

    2013-05-01

    Full Text Available This paper shows some idea as follows: First, integrated design of the Twin Towers as the changing action from IAIN to UIN Sunan Ampel. The religion and general knowledge’s position of Twin Towers’ integrated design is not mixed into one, but it works individually, and at the certain time are united in mutual dialogue. Second, Islamize design is done in order to criticize the general knowledge which has western sources and are secular, materialistic, and individualistic. In the process to Islamize the knowledge, Islamic knowledge tries to intervene the general knowledge in order to filter it so the knowledge will be Islamized. Consequently, to Islamize knowledge is to give an Islamic concept into general knowledge. Third, there are the similarities and differences between integrated design knowledge based on Islamic knowledge and integrated Twin Towers. The difference is in its epistemology process. The similarity is in the curriculum (ontology and objective (axiology. In the curriculum, the examined knowledge is religion and general knowledge. While the objective, Islamize knowledge and integrated Twin Towers aims to integrate religion and general knowledge, to dialogue, to communicate, and to synergy, so it can be a knowledge which is intact-integral-integrative.

  2. Prenatal Sonographic Diagnosis of Acardiac Twins

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jeong Ah; Song, Mi Jin [Cheil General Hospital, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

    2006-09-15

    This study was performed to present the prenatal sonographic findings and the associated abnormalities of acardiac twins. Seven cases of acardiac twins were reviewed retrospectively. Prenatal ultrasonography was performed in all patients at a gestational age between 12 and 27 weeks (mean 17.6 weeks). Autopsy was performed in four cases. The sonographic and autopsy findings were reviewed to report the associated abnormalities of the acardiac and donor fetuses. The diagnosis of acardiac twins was made on the basis of ultrasonography (n=6) or autopsy (n=1). The associated abnormalities of the acardiac fetuses were single umbilical artery (SUA) (n=5), abdominal wall defect (n=4), club feet (n=4), scoliosis (n=1), cleft lip and palate (n=1), digital anomaly (n=1), and umbilical cord cyst (n=1). In four of the donor fetuses, sonographic abnormalities were found. Autopsy was performed in three of the four cases to reveal hydropic change (n=2), diaphragmatic hernia (n=1) and multiple structural abnormalities of interventricular septal defect, polydactyly, club feet and SUA (n=1). Intrauterine fetal death occurred in five donors and follow-up was lost in the remaining two. Meticulous sonography enables the diagnosis of acardiac twins at an early gestational age and can reveal the associated abnormalities of the donor fetus as well as the acardiac fetus

  3. Prenatal diagnosis of chorionicity in twins.

    LENUS (Irish Health Repository)

    Hassan, T

    2012-02-01

    The aim of this audit was to assess the accuracy of transabdominal ultrasound scan in predicting chorionicity in twin pregnancies in our unit. The presence or absence of lambda sign, T-sign, dividing membrane thickness and number of placentae were used to determine chorionicity. We retrospectively analysed these antenatal markers in 268 sets of twins delivered over a 5 year period and compared it with the postpartum placental histology and neonatal gender. Of 268 twin deliveries, 204 (76%) had both chorionicity and placental histology to compare. 67 of 84 (80%) were correctly diagnosed antenatally as monochorionic and 137 of 151 (91%) as dichorionic. In 31 cases (15%) the ultrasound diagnosis of chorionicity didn\\'t match placental histology. Seventeen were thought to be monochorionic antenatally but were confirmed dichorionic on placental histology. Overall chorionicity was correctly diagnosed in 171\\/204 (84%) using transabdominal ultrasound scan (USS) in all trimesters. However the sensitivity and specificity of USS was much higher for dichorionic twins when carried out before 14 weeks of gestation.

  4. Monozygotic twins of different apparent sex

    Energy Technology Data Exchange (ETDEWEB)

    Yokota, Yukifumi; Fujino, Nobuyuki; Sato, Yoshiaki; Matsunobu, Akira; Tadokoro, Mamoru [Sagamihara Kyodo Hospital (Japan); Akane, Atsushi [Kansai Medical College, Osaka (Japan); Matsuura, Nobuo; Maeda, Tohru [Kitasato Univ. (Japan); Nakahori, Yutaka; Nakagome, Yasuo [Univ. of Tokyo (Japan)

    1994-10-15

    We report on twins of unlike sex who shared a 45,X/46,X, +mar karyotype. The mar chromosome was found to be Yq- by DNA analysis. Marker studies, including 8 VNTR loci, yielded a probability of monozygosity of 0.99999996. 16 refs., 1 fig., 1 tab.

  5. Parapagus conjoined twins: Complicated anatomy precludes separation

    Directory of Open Access Journals (Sweden)

    Singhal Arbinder

    2006-01-01

    Full Text Available A parapagus set of male conjoined twins was brought to our institution at 12 h after birth. An extensive sharing of the abdominal viscera (single liver, hindgut, abdominal aorta, pelvis (single rectum and anus, genitalia (one set and vertebral column was found. The surgical separation was not considered due to medical and ethical issues.

  6. Confluent hepatic fibrosis in monozygotic twins

    International Nuclear Information System (INIS)

    Ooi, C.G.C.; Peh, W.C.G.; Chan, K.L.; Saing Htut; Ngan, H.

    1999-01-01

    The MRI and CT features of confluent hepatic fibrosis (CHF) are reported in two 6-year-old-twins. This is the first case report in children of this little known entity, which may mimic mass lesions, and the first to describe an association of CHF with anti-tuberculous drugs

  7. pregnancy metabolism In . tWIn

    African Journals Online (AJOL)

    .ficant differences in venous blood sugar values or insulin responses were found between singleton and twin pregnancies. S Atr Med J 1983; 63: 53&-540. It is well known that pregnancy is associated with alterations in carbohydrate metabolism. These changes are best reflected by blood glucose and insulin patterns.

  8. Gleanings from Identical Twins Studying Science.

    Science.gov (United States)

    Mascazine, John R.

    This paper explains and summarizes the results of a study that investigated the ways in which monozygotic (identical) and dizygotic (fraternal) twins learn. Their individual learning style elements were specifically investigated according to the Dunn and Dunn model. This paper discusses the themes, unique needs, and characteristics monozygotic…

  9. Twinning of amphibian embryos by centrifugation

    Science.gov (United States)

    Black, S. D.

    1984-01-01

    In the frog Xenopus laevis, the dorsal structures of the embryonic body axis normally derive from the side of the egg opposite the side of sperm entry. However, if the uncleaved egg is inclined at lg or centrifuged in an inclined position, this topographic relationship is overridden: the egg makes its dorsal axial structures according to its orientation in the gravitational/centrifugal field, irrespective of the position of sperm entry. Certain conditions of centrifugation cause eggs to develop into conjoined twins with two sets of axial structures. A detailed analysis of twinning provided some insight into experimental axis orientation. First, as with single-axis embryos, both axes in twins are oriented according to the direction of centrifugation. One axis forms at the centripetal side of the egg and the other forms at the centrifugal side, even when the side of sperm entry is normal to the centrifugal force vector. Second, if eggs are centrifuged to give twins, but are inclined at lg to prevent post-centrifugation endoplasmic redistributions, only single-axis embryos develop. Thus, a second redistribution is required for high-frequency secondary axis formation. This can be accomplished by lg (as in the single centrifugations) or by a second centrifugation directed along the egg's animal-vegetal axis.

  10. Twin hub network : Identificatie van kansrijke netwerken

    NARCIS (Netherlands)

    Kreutzberger, E.D.; Konings, J.W.; Macharis, C.; Meers, D.

    2014-01-01

    Twin hub network gaat over de bundeling rail container stromen van en naar de zeehavens Rotterdam en Antwerpen en van kleinere zeehavens in de range Duinkerken – Amsterdam. Door de bundeling moet het mogelijk worden om grotere treinladingen en/of hogere treinfrequenties te organiseren en meer inland

  11. Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules

    DEFF Research Database (Denmark)

    Tanenbaum, David M.; Dam, Henrik Friis; Rösch, R.

    2012-01-01

    Fully roll-to-roll processed polymer solar cell modules were prepared, characterized, and laminated. Cell modules were cut from the roll and matched pairs were selected, one module with exposed cut edges, the other laminated again with the same materials and adhesive sealing fully around the cut...

  12. 78 FR 69316 - Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce Deutschland...

    Science.gov (United States)

    2013-11-19

    ... Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Formerly Rolls-Royce Deutschland GmbH, Formerly... (AD) 2012-26-14 that applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-715A1-30, BR700... Deutschland Ltd & Co KG, Eschenweg 11, Dahlewitz, 15827 Blankenfelde- Mahlow, Germany; phone: 49 0 33-7086...

  13. 75 FR 65453 - Certain Hot-Rolled Flat-Rolled Carbon Quality Steel Flat Products From Brazil: Notice of...

    Science.gov (United States)

    2010-10-25

    ... the final determination of the investigation of hot- rolled steel from Brazil, the Department... Final Determination of Sales at Less Than Fair Value; Certain Hot-Rolled Flat-Rolled Carbon Quality..., with excellent surface quality and chemistry restrictions as follows: 0.012 percent maximum phosphorus...

  14. 76 FR 22868 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Final Results of...

    Science.gov (United States)

    2011-04-25

    ...-Rolled Carbon-Quality Steel Products From Brazil: Final Results of Countervailing Duty Administrative...-Quality Steel Products From Brazil: Preliminary Results of Countervailing Duty Administrative Review, 75.... See Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Extension of Time Limit...

  15. Reflectance spectrometry of placental vessels in cases of twin-twin transfusion syndrome: experiments and modeling

    Science.gov (United States)

    Lines, Collin; Kim, Oleg; McMurdy, John; Luks, Francois; Alber, Mark; Crawford, Greg

    2013-03-01

    A stochastic photon transport model in multilayer skin tissue combined with reflectance spectroscopy measurements is used to study placental vessels in cases of twin-twin transfusion syndrome (TTTS). TTTS occurs in about 12% of monozygotic (identical) twin pregnancies wherein flow within placental vessels linking the twins together becomes unbalanced, leading to dual mortality. Endoscopic laser ablation can halt the syndrome by occluding the anastomoses connecting the two fetuses. The objective of this study is to develop a technique to determine hemoglobin (Hb) content through spectral analysis of diffuse reflectance spectra of placental vessels to aid in identification of the anastomoses. Previous work by researchers at Brown University has shown that the reflectance spectra of the donor twin and recipient twin are considerably different in the wavelengths for Hb absorbance. This presentation will give preliminary results for a Monte Carlo model adapted to fit the physiology of the placenta that can be used to quantitative determine the Hb levels. The reflectance spectra of the vessels are simulated for different values of Hb as well oxygenation and water concentration with the vessel and placental mass. The preliminary results will be shown to be in good approximation with the prior experimental data. The combination of modeling with spectroscopic measurement will provide a new tool for detailed prenatal study.

  16. Toward large-area roll-to-roll printed nanophotonic sensors

    Science.gov (United States)

    Karioja, Pentti; Hiltunen, Jussi; Aikio, Sanna M.; Alajoki, Teemu; Tuominen, Jarkko; Hiltunen, Marianne; Siitonen, Samuli; Kontturi, Ville; Böhlen, Karl; Hauser, Rene; Charlton, Martin; Boersma, Arjen; Lieberzeit, Peter; Felder, Thorsten; Eustace, David; Haskal, Eliav

    2014-05-01

    Polymers have become an important material group in fabricating discrete photonic components and integrated optical devices. This is due to their good properties: high optical transmittance, versatile processability at relative low temperatures and potential for low-cost production. Recently, nanoimprinting or nanoimprint lithography (NIL) has obtained a plenty of research interest. In NIL, a mould is pressed against a substrate coated with a moldable material. After deformation of the material, the mold is separated and a replica of the mold is formed. Compared with conventional lithographic methods, imprinting is simple to carry out, requires less-complicated equipment and can provide high-resolution with high throughput. Nanoimprint lithography has shown potential to become a method for low-cost and high-throughput fabrication of nanostructures. We show the development process of nano-structured, large-area multi-parameter sensors using Photonic Crystal (PC) and Surface Enhanced Raman Scattering (SERS) methodologies for environmental and pharmaceutical applications. We address these challenges by developing roll-to-roll (R2R) UV-nanoimprint fabrication methods. Our development steps are the following: Firstly, the proof of concept structures are fabricated by the use of wafer-level processes in Si-based materials. Secondly, the master molds of successful designs are fabricated, and they are used to transfer the nanophotonic structures into polymer materials using sheet-level UV-nanoimprinting. Thirdly, the sheet-level nanoimprinting processes are transferred to roll-to-roll fabrication. In order to enhance roll-to-roll manufacturing capabilities, silicone-based polymer material development was carried out. In the different development phases, Photonic Crystal and SERS sensor structures with increasing complexities were fabricated using polymer materials in order to enhance sheet-level and roll-to-roll manufacturing processes. In addition, chemical and molecular

  17. Conjoined twins – role of imaging and recent advances

    Directory of Open Access Journals (Sweden)

    Rishi Philip Mathew

    2017-12-01

    Full Text Available Introduction: Conjoined twins are identical twins with fused bodies, joined in utero. They are rare complications of monochorionic twinning. The purpose of this study is to describe the various types of conjoined twins, the role of imaging and recent advances aiding in their management. Material and methods: This was a twin institutional study involving 3 cases of conjoined twins diagnosed over a period of 6 years from 2010 to 2015. All the 3 cases were identified antenatally by ultrasound. Only one case was further evaluated by MRI. Results: Three cases of conjoined twins (cephalopagus, thoracopagus and omphalopagus were accurately diagnosed on antenatal ultrasound. After detailed counseling of the parents and obtaining written consent, all the three cases of pregnancy were terminated. Delivery of the viable conjoined twins was achieved without any complications to the mothers, and all the three conjoined twins died after a few minutes. Conclusion: Ultrasound enables an early and accurate diagnosis of conjoined twins, which is vital for obstetric management. MRI is reserved for better tissue characterization. Termination of pregnancy when opted, should be done at an early stage as later stages are fraught with problems. Recent advances, such as 3D printing, may aid in surgical pre-planning, thereby enabling successful surgical separation of conjoined twins.

  18. Time trends in the natural dizygotic twinning rate.

    Science.gov (United States)

    Derom, Catherine; Gielen, Marij; Peeters, Hilde; Frijns, Jean-Pierre; Zeegers, Maurice P A

    2011-08-01

    The natural dizygotic (DZ) twinning rate has been proposed as a reliable and useful measure of human fecundity, if adjusted for maternal age at twin birth. The aim of this study was to analyze age-adjusted trends in natural DZ twinning rates over the past 40 years using data from the 'East Flanders Prospective Twin Survey (EFPTS)'. This study involved 4835 naturally conceived twin pregnancies between 1969 and 2009 from the population-based Belgian 'EFPTS'. Age-adjusted trends in the incidence of natural DZ twin pregnancies were calculated using a generalized linear model with Poisson distribution. Both the natural DZ twinning rates and maternal age at twin birth increased in a linear fashion from 1969 to 2009. When age-adjusted, we found that the trend in the natural DZ twinning rate was stable during the whole time period. According to our population-based data and after age-adjustment, a stable natural DZ twinning rate could be observed over the last four decades. Under the assumption that the spontaneous DZ twinning rate is a sensor of fecundity, this indicates a stable 'high' fecundity for this population.

  19. Conjoined twins - role of imaging and recent advances.

    Science.gov (United States)

    Mathew, Rishi Philip; Francis, Swati; Basti, Ram Shenoy; Suresh, Hadihally B; Rajarathnam, Annie; Cunha, Prema D; Rao, Sujaya V

    2017-12-01

    Conjoined twins are identical twins with fused bodies, joined in utero. They are rare complications of monochorionic twinning. The purpose of this study is to describe the various types of conjoined twins, the role of imaging and recent advances aiding in their management. This was a twin institutional study involving 3 cases of conjoined twins diagnosed over a period of 6 years from 2010 to 2015. All the 3 cases were identified antenatally by ultrasound. Only one case was further evaluated by MRI. Three cases of conjoined twins (cephalopagus, thoracopagus and omphalopagus) were accurately diagnosed on antenatal ultrasound. After detailed counseling of the parents and obtaining written consent, all the three cases of pregnancy were terminated. Delivery of the viable conjoined twins was achieved without any complications to the mothers, and all the three conjoined twins died after a few minutes. Ultrasound enables an early and accurate diagnosis of conjoined twins, which is vital for obstetric management. MRI is reserved for better tissue characterization. Termination of pregnancy when opted, should be done at an early stage as later stages are fraught with problems. Recent advances, such as 3D printing, may aid in surgical pre-planning, thereby enabling successful surgical separation of conjoined twins.

  20. Thai Twin Registry: description of the initial stage.

    Science.gov (United States)

    Nanakorn, Somsong; Chusilp, Kusuma; Kutanan, Wibhu

    2013-02-01

    The present study describes the initial phase of the Thai Twin Registry (TTR) in Khon Kaen University, a pioneer research university located in the Northeast of Thailand. The initial steps of the study included the analysis of dermatoglyphic information in Thai twins for answering the research question: Are monozygotic (MZ) and dizygotic (DZ) twins different in dermatoglyphic variables? Subjects were 212 twin pairs (131 MZ and 81 [corrected] DZ), consisting of 155 males and 269 females. Four types of fingerprint pattern (FP) - that is, arch, radial loop, ulnar loop, and whorl - were classified and analyzed and compared between MZ and DZ twins. The arch radial loop and whorl frequencies differ between MZ and DZ twins. When comparing FP in each finger, only the right little finger shows a statistically different FP, while the FP similarity average from 10 homologous fingers of co-twins was greater in MZ than DZ twins. By using the Area Under the Receiver Operating Characteristic curve analysis, the MZ twins could be differentiated from DZ twins by the FP similarity. Summarizing, this valuable report about TTR was conducted by analysis of FP data, which indicated that the MZ and DZ twins exhibited FP pattern and FP similarity differences. Other dermatoglyphic studies of the existing FP database, such as finger ridge count, finger ridge density, and minutia, will be considered for ongoing research at the TTR.

  1. A twin study of personality disorders.

    Science.gov (United States)

    Torgersen, S; Lygren, S; Oien, P A; Skre, I; Onstad, S; Edvardsen, J; Tambs, K; Kringlen, E

    2000-01-01

    No twin study has previously investigated the whole range of personality disorders (PDs) recorded by interviews. Based on twin and patient registries, 92 monozygotic (MZ) and 129 dizygotic (DZ) twin pairs were interviewed with the Structured Clinical Interview for DSM-III-R Personality Disorders (SCID-II). Observed prevalence rates from a normal population study of more than 2,000 individuals were used in combination with data from the present study to generate statistics assumed to be valid for a normal twin population, and these statistics were used for structural equation modeling. The best-fitting models had a heritability of .60 for PDs generally, .37 for the eccentric (A) cluster, .60 for the emotional (B) cluster, and .62 for the fearful (C) cluster. Among the specific PDs, the heritability appeared to be .79 for narcissistic, .78 for obsessive-compulsive, .69 for borderline, .67 for histrionic, .61 for schizotypal, .57 for dependent, .54 for self-defeating, .29 for schizoid, .28 for paranoid, and .28 for avoidant PDs. The best-fitting models never included shared-in-families environmental effects. However, a model with only shared familial and unique environmental effects could not be ruled out for dependent PD. Shared familial environmental effects may also influence the development of any PD and borderline PD. Passive-aggressive PD did not seem to be affected by genes or family environment at all. The low occurrence of antisocial PD in the twin sample precluded any model for this disorder. PDs seem to be more strongly influenced by genetic effects than almost any axis I disorder, and more than most broad personality dimensions. However, we observed a large variation in heritability among the different PDs, probably partly because of a moderate sample size and low prevalence of the specific disorders.

  2. Prospective risk of fetal death in uncomplicated monochorionic twins.

    LENUS (Irish Health Repository)

    Farah, Nadine

    2012-03-01

    A retrospective cohort study was carried out in a university teaching hospital to determine the prospective risk of unexpected fetal death in uncomplicated monochorionic diamniotic (MCDA) twin pregnancies after viability. All MCDA twins delivered at or after 24 weeks\\' gestation from July 1999 to July 2007 were included. Pregnancies with twin-twin transfusion syndrome, growth restriction, structural abnormalities, or twin reversed arterial perfusion sequence were excluded. Of the 144 MCDA twin pregnancies included in our analysis, the risk of intrauterine death was 4.9%. The prospective risk of unexpected intrauterine death was 1 in 43 after 32 weeks\\' gestation and 1 in 37 after 34 weeks\\' gestation. Our results demonstrate that despite close surveillance, the unexpected intrauterine death rate in uncomplicated MCDA twin pregnancies is high. This rate seems to increase after 34 weeks\\' gestation, suggesting that a policy of elective preterm delivery warrants evaluation.

  3. Hematological disorders at birth in complicated monochorionic twins.

    Science.gov (United States)

    Verbeek, Lianne; Slaghekke, Femke; Sueters, Marieke; Middeldorp, Johanna M; Klumper, Frans J; Haak, Monique C; Oepkes, Dick; Lopriore, Enrico

    2017-06-01

    Monochorionic twins are at risk of severe complications including twin-twin transfusion syndrome (TTTS), twin anemia-polycythemia sequence (TAPS) and acute peripartum TTTS. The pathophysiology is based on inter-twin blood transfusion through placental vascular anastomoses. Areas covered: This review focuses on the incidence, management and outcome of neonatal hematological complications at birth in TTTS, TAPS and acute peripartum TTTS. Expert commentary: Hematological disorders are often present at birth in monochorionic twins and include acute or chronic anemia, polycythemia and thrombocytopenia. Routine measurement of complete blood counts in all complicated monochorionic twins is strongly recommended. Increased awareness on these disorders and correct diagnostic tests will lead to prompt and adequate management at birth.

  4. 75 FR 64246 - Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of...

    Science.gov (United States)

    2010-10-19

    ...-Rolled Carbon-Quality Steel Products From Brazil: Correction to Notice of Antidumping Duty Order AGENCY... certain hot-rolled flat-rolled carbon-quality steel products from Brazil. See Antidumping Duty Order: Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil, 67 FR 11093 (March 12, 2002...

  5. Structures and growth textures of Japanese twin boundaries in quartz

    Science.gov (United States)

    Momma, K.; Nagase, T.; Kudoh, Y.; Kuribayashi, T.

    2008-12-01

    Growth textures and atomic configurations of Japanese twin boundaries in quartz were studied by the observation of natural samples and by computational simulations. Samples used in this study are collected from Narushima, Nagasaki Prefecture, Japan. The samples were first polished, and then etched by hydrofluoric acid for several minutes. The etched figures were observed by phase-contrast reflection microscopy and scanning electron microscopy. From these observations, high concentration of Brazil twin lamellae is found near the composition plane of Japanese twin. Observations of cathode luminescence images reveal that the development of Brazil twin lamellae at {112×2} composition plane of Japanese twin is directly related to the preferential growth of Japanese twin along the composition plane. Atomic configurations at {112×2} composition planes of Japanese twin were simulated by using molecular dynamics simulations and the energy minimization method. The simulated structures proved that {112×2} or {1×1×22} composition planes are the only composition planes that do not introduce unsatisfied bonding between Si and O atoms. When the composition plane is different from these planes, some kind of defect structures, like dislocations, are inevitably introduced. In the case of Brazil twin, screw dislocations are also known to be incorporated where orientation of Brazil twin boundary changes from one orientation to another. On the other hand, in the case where Brazil twin boundaries intersect with {112×2} composition planes of Japanese twin, we found that structures are kept coherently without any unsatisfied bonding. This result means that {112×2} composition planes of Japanese twin are the crystallographic sites having more than one possible stacking structures. Observations in this study indicate that {112×2} composition plane of Japanese twin serves as a source of Brazil twin during the course of crystal growth.

  6. Finite-element model to predict roll-separation force and defects during rolling of U-10Mo alloys

    Science.gov (United States)

    Soulami, Ayoub; Burkes, Douglas E.; Joshi, Vineet V.; Lavender, Curt A.; Paxton, Dean

    2017-10-01

    A major goal of the Convert Program of the U.S. Department of Energy's National Nuclear Security Administration (DOE/NNSA) is to enable high-performance research reactors to operate with low-enriched uranium rather than the high-enriched uranium currently used. To this end, uranium alloyed with 10 wt% molybdenum (U-10Mo) represents an ideal candidate because of its stable gamma phase, low neutron caption cross section, acceptable swelling response, and predictable irradiation behavior. However, because of the complexities of the fuel design and the need for rolled monolithic U-10Mo foils, new developments in processing and fabrication are necessary. This study used a finite-element code, LS-DYNA, as a predictive tool to optimize the rolling process. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel were conducted following two different schedules. Model predictions of the roll-separation force and roll pack thicknesses at different stages of the rolling process were compared with experimental measurements. The study reported here discussed various attributes of the rolled coupons revealed by the model (e.g., waviness and thickness non-uniformity like dog-boning). To investigate the influence of the cladding material on these rolling defects, other cases were simulated: hot rolling with alternative can materials, namely, 304 stainless steel and Zircaloy-2, and bare-rolling. Simulation results demonstrated that reducing the mismatch in strength between the coupon and can material improves the quality of the rolled sheet. Bare-rolling simulation results showed a defect-free rolled coupon. The finite-element model developed and presented in this study can be used to conduct parametric studies of several process parameters (e.g., rolling speed, roll diameter, can material, and reduction).

  7. Cold rolling precision forming of shaft parts theory and technologies

    CERN Document Server

    Song, Jianli; Li, Yongtang

    2017-01-01

    This book presents in detail the theory, processes and equipment involved in cold rolling precision forming technologies, focusing on spline and thread shaft parts. The main topics discussed include the status quo of research on cold rolling precision forming technologies; the design and calculation of process parameters; the numerical simulation of cold rolling forming processes; and the equipment used in cold rolling forming. The mechanism of cold rolling forming is extremely complex, and research on the processes, theory and mechanical analysis of spline cold rolling forming has remained very limited to date. In practice, the forming processes and production methods used are mainly chosen on the basis of individual experience. As such, there is a marked lack of both systematic, theory-based guidelines, and of specialized books covering theoretical analysis, numerical simulation, experiments and equipment used in spline cold rolling forming processes – all key points that are included in this book and ill...

  8. Rolled fingerprint construction using MRF-based nonrigid image registration.

    Science.gov (United States)

    Kwon, Dongjin; Yun, Il Dong; Lee, Sang Uk

    2010-12-01

    This paper proposes a new rolled fingerprint construction approach incorporating a state-of-the-art nonrigid image registration method based upon a Markov random field (MRF) energy model. The proposed method finds dense correspondences between images from a rolled fingerprint sequence and warps the entire fingerprint area to synthesize a rolled fingerprint. This method can generate conceptually more accurate rolled fingerprints by preserving the geometric properties of the finger surface as opposed to ink-based rolled impressions and other existing rolled fingerprint construction methods. To verify the accuracy of the proposed method, various comparative experiments were designed to reveal differences among the rolled construction methods. The results show that the proposed method is significantly superior in various aspects compared to previous approaches.

  9. ROLLING PROCESS WITH OHSAS AND TEXTURE FORMATION– A REVIEW

    Directory of Open Access Journals (Sweden)

    P. CHANDRAMOHAN

    2009-03-01

    Full Text Available Rolling is a mechanical treatment, which plays an important part in the processing of ferrous and nonferrous alloys. Texturing is an important phenomenon that occurs after rolling process. Preferred orientation increases the strength of the material enormously. Hence the research is focused on the rolling studies and the texture formation, which occurs after rolling process. This review mainly focuses on rolling process carried out in different alloys. It also highlights the analysis made on various rolling parameters for improving the mechanical properties. Texture studies carried on various ferrous and non-ferrous alloys; particularly in nitrogen alloyed duplex stainless steel is discussed. Finally the need for implementation of occupational health and safety during a thermomechanical treatment is also discussed. The state of art in this field is encouraging and showing positive signs of commercializing rolled nitrogen alloyed duplex stainless steel after proper texture control.

  10. The effect of chorionicity and twin-to-twin delivery time interval on short-term outcome of the second twin

    DEFF Research Database (Denmark)

    Hjortø, Sofie; Nickelsen, Carsten; Petersen, Janne

    2013-01-01

    found no difference in the decrease of pH (p = 0.912) and Apgar (p = 0.609) in relation to increasing time interval. Neonatal unit (NICU) admissions did not differ (p = 0.167). Apgar ≤ 7 (p Apgar...... ≤ 7 and second twin pH ≤ 7.00 (p = 0.003) increased second twin risk of NICU admission. Conclusions: Increasing delivery interval was associated with a significant decrease in pH and Apgar, but there was no difference between MC and DC twins. Low Apgar of the first twin increased the risk of second...

  11. Dizygotic monochorionic twin pregnancy conceived following intracytoplasmic sperm injection treatment and complicated by twin-twin transfusion syndrome and blood chimerism

    DEFF Research Database (Denmark)

    Ekelund, Charlotte Kvist; Skibsted, L.; Søgaard, Kirsten

    2008-01-01

    and zygocity determination were performed on amniotic fluid and showed the twins to be dizygotic with normal female and male karyotypes. There were clinical and sonographic signs of twin-twin transfusion syndrome (TTTS), and Cesarean delivery was performed at 32 weeks' gestation. At birth the twins were...... phenotypically a normal male and a normal female. Histology of the placenta showed it to be monochorionic diamniotic. Blood chimerism was found postnatally as both infants had the karyotypes 46,XX[13]/46,XY[17]. Chimerism was not found in cells from a buccal swab at 6 months of age. This is one of only a few...

  12. 'Twin2twin' an innovative method of empowering midwives to strengthen their professional midwifery organisations.

    Science.gov (United States)

    Cadée, Franka; Perdok, Hilde; Sam, Betty; de Geus, Myrte; Kweekel, Liselotte

    2013-10-01

    midwives need professional support from a national midwifery organisation to be able to provide the services that are by regulatory mechanisms and accreditation expected of them. Not all midwives in the world are united in a professional organisation. The aim of this project was to strengthen the midwifery organisations of Sierra Leone and the Netherlands. During the process of the project it was realised that the development of a platform of exchange at organisational level would be enhanced by introducing personal exchange between individual midwives. In response to this new insight the original project plan was adjusted by incorporating the twin2twin method. twin2twin is a feminist methodology of mutual exchange between twenty pairs of midwives from different organisations (in this case Sierra Leone and the Netherlands). The method can be distinguished by 10 specific steps. It was developed, used and (re)evaluated through focus group discussions, storytelling and written evaluations. twinning of organisations was strengthened by adding a human component to the process. With the use of the 'twin2twin' method, midwives were encouraged to invested in a professional and personal bond with their 'twin sister'. This bond was independent and went beyond the relatively short four year project period. Through personal engagement and mutual exchange of knowledge and skills, midwives empowered each other to build and strengthen their midwifery organisations both in Sierra Leone and the Netherlands. (Empowerment refers to the expansion in people's ability to make strategic life choices in a context where this ability was previously denied to them (Narayan, 2005); organisational empowerment includes processes and structures that enhance members' skills and provides them with the mutual support necessary to effect community level change (Zimmerman, 1995).). despite challenges we are convinced that twin2twin can be of additional benefit for the success of other projects

  13. Thermal stability of warm-rolled tungsten

    DEFF Research Database (Denmark)

    Alfonso Lopez, Angel

    , and recrystallization fitted to JMAK recrystallization kinetics, which in turn allowed thecalculation of recrystallization activation energies. Much faster recovery and recrystallizationkinetics were found for the plate warm-rolled to 90% thickness reduction, as compared to the platewarm-rolled to 67% thickness...... for higher annealing temperatures and higher deformation. Considerably different activation energies were found for the plates W67 and W90, comparable tothe activation energies of bulk diffusion and grain boundary diffusion respectively. Theextrapolation of the recrystallization kinetics (based...... mayalter the microstructure of the material by recovery, recrystallization and grain growth, and maycause degradation in material properties as a loss in mechanical strength and embrittlement.For this reason, this project aims towards establishing the temperature and time regime under whichrecovery...

  14. Contact conditions in skin-pass rolling

    DEFF Research Database (Denmark)

    Kijima, Hideo; Bay, Niels

    2007-01-01

    The special contact conditions in skin-pass rolling of steel strip is analysed by studying plane strain upsetting of thin sheet with low reduction applying long narrow tools and dry friction conditions. An extended sticking region is estimated by an elasto-plastic FEM analysis of the plane strain...... upsetting. This sticking region causes a highly inhomogeneous elasto-plastic deformation with large influence of work-hardening and friction. A numerical analysis of skin-pass rolling shows the same contact conditions, i.e. an extended sticking region around the center of the contact zone. The calculated...... size of the sticking region with varying contact length and pressure/reduction is experimentally verified by plane strain upsetting tests measuring the local surface deformation of the work pieces after unloading....

  15. A NOVEL ROLLING BASED DNA CRYPTOGRAPHY

    Directory of Open Access Journals (Sweden)

    Rejwana Haque

    2017-05-01

    Full Text Available DNA Cryptography can be defined as a hiding data in terms of DNA Sequence. In this paper we propose a new DNA Encryption Technique where three different types of ordering is use to make binary data into cipher text. The main stages of this encryption technique are: Key Analysis, Data and Key Arrangement, Roll in encoding, Secondary Arrangement and Shifting. Decryption process has six main steps to obtain the original binary data from the encrypted data and key. Decryption steps are: Key Analysis, Shifting, Secondary Arrangement, Key Arrangement, Roll-out decoding, Data Arrangement. Here key size is half of binary data and the key is varies from data to data so key are used as one time pad. In this paper we also discuss about the implementation from sample data and security analysis for this given method.

  16. Rolling-circle transposons in eukaryotes.

    Science.gov (United States)

    Kapitonov, V V; Jurka, J

    2001-07-17

    All eukaryotic DNA transposons reported so far belong to a single category of elements transposed by the so-called "cut-and-paste" mechanism. Here, we report a previously unknown category of eukaryotic DNA transposons, Helitron, which transpose by rolling-circle replication. Autonomous Helitrons encode a 5'-to-3' DNA helicase and nuclease/ligase similar to those encoded by known rolling-circle replicons. Helitron-like transposons have conservative 5'-TC and CTRR-3' termini and do not have terminal inverted repeats. They contain 16- to 20-bp hairpins separated by 10--12 nucleotides from the 3'-end and transpose precisely between the 5'-A and T-3', with no modifications of the AT target sites. Together with their multiple diverged nonautonomous descendants, Helitrons constitute approximately 2% of both the Arabidopsis thaliana and Caenorhabditis elegans genomes and also colonize the Oriza sativa genome. Sequence conservation suggests that Helitrons continue to be transposed.

  17. Time-optimal control of rolling bodies

    Science.gov (United States)

    Perantoni, Giacomo; Limebeer, David J. N.

    2013-11-01

    The brachistochrone problem is usually solved in classical mechanics courses using the calculus of variations, although it is quintessentially an optimal control problem. In this paper, we address the classical brachistochrone problem and two vehicle-relevant generalisations from an optimal control perspective. We use optimal control arguments to derive closed-form solutions for both the optimal trajectory and the minimum achievable transit time for these generalisations. We then study optimal control problems involving a steerable disc rolling between prescribed points on the interior surface of a hemisphere. The effects of boundary and control constraints are examined. For three-dimensional problems of this type, which involve rolling bodies and nonholonomic constraints, numerical solutions are used.

  18. Wavelength selection of rolling grain ripples

    Science.gov (United States)

    Wesfreid, José Eduardo; Rousseaux, Germain; Baradel, Christian; Stegner, Alexandre

    2002-11-01

    A flat particle bed under an oscillatory viscous flow is generally unstable and leads to the formation of ripples. Using a cylindrical oscillating tank, we have studied in laboratory, at very high resolution, the wavelength selection, the morphology and the temporal evolution of theses ripples. Initially, the rolling of individual grains on the flat sand bed induces small rolling grain ripples. At this stage the wavelength selection depends on the grain diameter, the viscous boundary layer and the viscous length. In a second stage, the ripples follow a coarsening process which increase both the height and the wavelength of the patterns. For few cases, especially close to the onset of ripple formation, a logarithmic growth of the wavelength is observed. Then, if we wait long enough the system always evolves to a final vortex ripple state which is mainly controlled by the amplitude of the fluid excursion.

  19. Dynamics and Stability of Rolling Viscoelastic Tires

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Trevor [Univ. of California, Berkeley, CA (United States)

    2013-04-30

    Current steady state rolling tire calculations often do not include treads because treads destroy the rotational symmetry of the tire. We describe two methodologies to compute time periodic solutions of a two-dimensional viscoelastic tire with treads: solving a minimization problem and solving a system of equations. We also expand on work by Oden and Lin on free spinning rolling elastic tires in which they disovered a hierachy of N-peak steady state standing wave solutions. In addition to discovering a two-dimensional hierarchy of standing wave solutions that includes their N-peak hiearchy, we consider the eects of viscoelasticity on the standing wave solutions. Finally, a commonplace model of viscoelasticity used in our numerical experiments led to non-physical elastic energy growth for large tire speeds. We show that a viscoelastic model of Govindjee and Reese remedies the problem.

  20. Heat treated twin wire arc spray AISI 420 coatings under dry and wet abrasive wear

    Science.gov (United States)

    Rodriguez, E.; González, M. A.; Monjardín, H. R.; Jimenez, O.; Flores, M.; Ibarra, J.

    2017-11-01

    The influence of applying two different heat treatments such as: deep cryogenic and tempering on dry/wet abrasive wear resistance of twin wire arc spray martensitic AISI 420 coatings was evaluated by using a modified rubber wheel type test apparatus. A load dependency was observed on the abrasive wear rate behavior of both; dry and wet tests. Three body (rolling) and two body (sliding) wear mechanisms were identified in dry conditions, prevailing rolling at lower and higher loads. However, at higher loads, more presence of grooving and pits formation was observed. Coatings tempered at 205 °C/1 h displayed better wear resistance than cryogenic treated ones. A change in wear mechanism between dry and wet conditions was observed; two body wear mechanism predominated respect to three body. In both; dry and wet conditions the microstructure (several inter-splat oxides) as well as strain and residual stress promotes brittle material removal which was more evident in cryogenic and as-sprayed samples during dry test and at higher loads in wet conditions.