WorldWideScience

Sample records for tutorial process selection

  1. Developing Tutorials for Advanced Physics Students: Processes and Lessons Learned

    CERN Document Server

    Baily, Charles; Pollock, Steven J

    2013-01-01

    When education researchers describe newly developed curricular materials, they typically concentrate on the research base behind their design, and the efficacy of the final products, but do not highlight the initial stages of creating the actual materials. With the aim of providing useful information for faculty engaged in similar projects, we describe here our development of a set of in-class tutorials for advanced undergraduate electrodynamics students, and discuss factors that influenced their initial design and refinement. Among the obstacles to be overcome was the investigation of student difficulties within the short time frame of our project, and devising ways for students to engage in meaningful activities on advanced-level topics within a single 50-minute class period. We argue for a process that leverages faculty experience and classroom observations, and present several guidelines for tutorial development and implementation in upper-division physics classrooms.

  2. Time-fractional derivatives in relaxation processes: a tutorial survey

    CERN Document Server

    Mainardi, Francesco

    2008-01-01

    The aim of this tutorial survey is to revisit the basic theory of relaxation processes governed by linear differential equations of fractional order. The fractional derivatives are intended both in the Rieamann-Liouville sense and in the Caputo sense. After giving a necessary outline of the classical theory of linear viscoelasticity, we contrast these two types of fractional derivatives in their ability to take into account initial conditions in the constitutive equations of fractional order. We also provide historical notes on the origins of the Caputo derivative and on the use of fractional calculus in viscoelasticity.

  3. TMVA tutorial

    CERN Document Server

    CERN. Geneva; VOSS, Helge

    2015-01-01

    This tutorial will both give an introduction on how to use TMVA in root6 and showcase some new features, such as modularity, variable importance, interfaces to R and python. After explaining the basic functionality, the typical steps required during a real life application (such as variable selection, pre-processing, tuning and classifier evaluation) will be demonstrated on simple examples. First part of the tutorial will use the usual Root interface (please make sure you have Root 6.04 installed somewhere). The second part will utilize the new server notebook functionality of Root as a Service. If you are within CERN but outside the venue or outside CERN please consult the notes attached.

  4. Group decision making with the analytic hierarchy process in benefit-risk assessment: a tutorial.

    Science.gov (United States)

    Hummel, J Marjan; Bridges, John F P; IJzerman, Maarten J

    2014-01-01

    The analytic hierarchy process (AHP) has been increasingly applied as a technique for multi-criteria decision analysis in healthcare. The AHP can aid decision makers in selecting the most valuable technology for patients, while taking into account multiple, and even conflicting, decision criteria. This tutorial illustrates the procedural steps of the AHP in supporting group decision making about new healthcare technology, including (1) identifying the decision goal, decision criteria, and alternative healthcare technologies to compare, (2) structuring the decision criteria, (3) judging the value of the alternative technologies on each decision criterion, (4) judging the importance of the decision criteria, (5) calculating group judgments, (6) analyzing the inconsistency in judgments, (7) calculating the overall value of the technologies, and (8) conducting sensitivity analyses. The AHP is illustrated via a hypothetical example, adapted from an empirical AHP analysis on the benefits and risks of tissue regeneration to repair small cartilage lesions in the knee.

  5. A tutorial on the application of ion-selective electrode potentiometry: an analytical method with unique qualities, unexplored opportunities and potential pitfalls; tutorial.

    Science.gov (United States)

    Lindner, Ernő; Pendley, Bradford D

    2013-01-31

    Ion-selective potentiometry enjoys practical utility as a simple analytical technique to measure ionic constituents in complex samples. Advances in the field have improved the selectivity and decreased the detection limit of ion-selective electrodes (ISEs) by orders of magnitude such that trace analysis in micro and nanomolar concentrations is now possible with potentiometric sensors. This tutorial reviews the fundamental principles of ion-selective potentiometry, describes the practical considerations involved in the use of these sensors to measure real samples, and discusses the statistical evaluation of experimental results compared with alternative analytical techniques.

  6. Bayesian accounts of covert selective attention: A tutorial review.

    Science.gov (United States)

    Vincent, Benjamin T

    2015-05-01

    Decision making and optimal observer models offer an important theoretical approach to the study of covert selective attention. While their probabilistic formulation allows quantitative comparison to human performance, the models can be complex and their insights are not always immediately apparent. Part 1 establishes the theoretical appeal of the Bayesian approach, and introduces the way in which probabilistic approaches can be applied to covert search paradigms. Part 2 presents novel formulations of Bayesian models of 4 important covert attention paradigms, illustrating optimal observer predictions over a range of experimental manipulations. Graphical model notation is used to present models in an accessible way and Supplementary Code is provided to help bridge the gap between model theory and practical implementation. Part 3 reviews a large body of empirical and modelling evidence showing that many experimental phenomena in the domain of covert selective attention are a set of by-products. These effects emerge as the result of observers conducting Bayesian inference with noisy sensory observations, prior expectations, and knowledge of the generative structure of the stimulus environment.

  7. Deep learning for digital pathology image analysis: A comprehensive tutorial with selected use cases.

    Science.gov (United States)

    Janowczyk, Andrew; Madabhushi, Anant

    2016-01-01

    Deep learning (DL) is a representation learning approach ideally suited for image analysis challenges in digital pathology (DP). The variety of image analysis tasks in the context of DP includes detection and counting (e.g., mitotic events), segmentation (e.g., nuclei), and tissue classification (e.g., cancerous vs. non-cancerous). Unfortunately, issues with slide preparation, variations in staining and scanning across sites, and vendor platforms, as well as biological variance, such as the presentation of different grades of disease, make these image analysis tasks particularly challenging. Traditional approaches, wherein domain-specific cues are manually identified and developed into task-specific "handcrafted" features, can require extensive tuning to accommodate these variances. However, DL takes a more domain agnostic approach combining both feature discovery and implementation to maximally discriminate between the classes of interest. While DL approaches have performed well in a few DP related image analysis tasks, such as detection and tissue classification, the currently available open source tools and tutorials do not provide guidance on challenges such as (a) selecting appropriate magnification, (b) managing errors in annotations in the training (or learning) dataset, and (c) identifying a suitable training set containing information rich exemplars. These foundational concepts, which are needed to successfully translate the DL paradigm to DP tasks, are non-trivial for (i) DL experts with minimal digital histology experience, and (ii) DP and image processing experts with minimal DL experience, to derive on their own, thus meriting a dedicated tutorial. This paper investigates these concepts through seven unique DP tasks as use cases to elucidate techniques needed to produce comparable, and in many cases, superior to results from the state-of-the-art hand-crafted feature-based classification approaches. Specifically, in this tutorial on DL for DP image

  8. The Comprehensive AOCMF Classification System: Condylar Process Fractures - Level 3 Tutorial

    OpenAIRE

    Neff, Andreas; Cornelius, Carl-Peter; Rasse, Michael; Torre, Daniel Dalla; Audigé, Laurent

    2014-01-01

    This tutorial outlines the detailed system for fractures of the condylar process at the precision level 3 and is organized in a sequence of sections dealing with the description of the classification system within topographical subdivisions along with rules for fracture coding and a series of case examples with clinical imaging. Basically, the condylar process comprises three fracture levels and is subdivided into the head region, the condylar neck, and the condylar base. Fractures of the con...

  9. Microcomputer-based digital image processing - A tutorial package for exploration geologists

    Science.gov (United States)

    Harrington, J. A., Jr.; Cartin, K. F.

    1985-01-01

    An Apple II microcomputer-based software package for analysis of digital data developed at the University of Oklahoma, the Digital Image Analysis System (DIAS), provides a relatively low-cost, portable alternative to large, dedicated minicomputers for digital image processing education. Digital processing techniques for analysis of Landsat MSS data and a series of tutorial exercises for exploration geologists are described and evaluated. DIAS allows in-house training that does not interfere with computer-based prospect analysis objectives.

  10. Tutorial: Signal Processing in Brain-Computer Interfaces

    NARCIS (Netherlands)

    Garcia Molina, G.

    2010-01-01

    Research in Electroencephalogram (EEG) based Brain-Computer Interfaces (BCIs) has been considerably expanding during the last few years. Such an expansion owes to a large extent to the multidisciplinary and challenging nature of BCI research. Signal processing undoubtedly constitutes an essential co

  11. EFFECTIVE ELECTRONIC TUTORIAL

    Directory of Open Access Journals (Sweden)

    Andrei A. Fedoseev

    2014-01-01

    Full Text Available The article analyzes effective electronic tutorials creation and application based on the theory of pedagogy. Herewith the issues of necessary electronic tutorial functional, ways of the educational process organization with the use of information and communication technologies and the logistics of electronic educational resources are touched upon. 

  12. IL web tutorials

    DEFF Research Database (Denmark)

    Hyldegård, Jette; Lund, Haakon

    2012-01-01

    The paper presents the results from a study on information literacy in a higher education (HE) context based on a larger research project evaluating 3 Norwegian IL web tutorials at 6 universities and colleges in Norway. The aim was to evaluate how the 3 web tutorials served students’ information...... seeking and writing process in an study context and to identify barriers to the employment and use of the IL web tutorials, hence to the underlying information literacy intentions by the developer. Both qualitative and quantitative methods were employed. A clear mismatch was found between intention...... and use of the web tutorials. In addition, usability only played a minor role compared to relevance. It is concluded that the positive expectations of the IL web tutorials tend to be overrated by the developers. Suggestions for further research are presented....

  13. Searching for optimal setting conditions in technological processes using parametric estimation models and neural network mapping approach: a tutorial.

    Science.gov (United States)

    Fjodorova, Natalja; Novič, Marjana

    2015-09-03

    Engineering optimization is an actual goal in manufacturing and service industries. In the tutorial we represented the concept of traditional parametric estimation models (Factorial Design (FD) and Central Composite Design (CCD)) for searching optimal setting parameters of technological processes. Then the 2D mapping method based on Auto Associative Neural Networks (ANN) (particularly, the Feed Forward Bottle Neck Neural Network (FFBN NN)) was described in comparison with traditional methods. The FFBN NN mapping technique enables visualization of all optimal solutions in considered processes due to the projection of input as well as output parameters in the same coordinates of 2D map. This phenomenon supports the more efficient way of improving the performance of existing systems. Comparison of two methods was performed on the bases of optimization of solder paste printing processes as well as optimization of properties of cheese. Application of both methods enables the double check. This increases the reliability of selected optima or specification limits. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. IL web tutorials

    DEFF Research Database (Denmark)

    Hyldegård, Jette; Lund, Haakon

    2012-01-01

    The paper presents the results from a study on information literacy in a higher education (HE) context based on a larger research project evaluating 3 Norwegian IL web tutorials at 6 universities and colleges in Norway. The aim was to evaluate how the 3 web tutorials served students’ information...... seeking and writing process in an study context and to identify barriers to the employment and use of the IL web tutorials, hence to the underlying information literacy intentions by the developer. Both qualitative and quantitative methods were employed. A clear mismatch was found between intention...

  15. The Comprehensive AOCMF Classification System: Condylar Process Fractures - Level 3 Tutorial.

    Science.gov (United States)

    Neff, Andreas; Cornelius, Carl-Peter; Rasse, Michael; Torre, Daniel Dalla; Audigé, Laurent

    2014-12-01

    This tutorial outlines the detailed system for fractures of the condylar process at the precision level 3 and is organized in a sequence of sections dealing with the description of the classification system within topographical subdivisions along with rules for fracture coding and a series of case examples with clinical imaging. Basically, the condylar process comprises three fracture levels and is subdivided into the head region, the condylar neck, and the condylar base. Fractures of the condylar head show typical fracture lines either within the lateral pole zone, which may lead to loss of vertical height, or medially to the pole zone, with the latter ones usually not compromising the vertical condyle to fossa relation. In condylar head fractures, the morphology is further described by the presence of minor or major fragmentation, the vertical apposition of fragments at the plane of the head fracture, the displacement of the condylar head with regard to the fossa including a potential distortion of the condylar head congruency resulting in dystopic condyle to fossa relations and the presence or absence of a loss of vertical ramus height. A specific vertical fracture pattern extending from the head to the neck or base subregion is considered. Fractures of the condylar neck and base can be differentiated according to a newly introduced one-third to two-thirds rule with regard to the proportion of the fracture line above and below the level of the sigmoid notch, which is presented in the classification article, and are basically subdivided according to the presence or absence of displacement or dislocation. In both condylar neck and base fractures, the classification is again based on the above mentioned parameters such as fragmentation, displacement of the condylar head with regard to the fossa, including dystopic condyle to fossa relations and loss of vertical ramus height, that is, according to the measurement of the condylar process. In addition, the

  16. An Action Research Process on University Tutorial Sessions with Small Groups: Presentational Tutorial Sessions and Online Communication

    Science.gov (United States)

    Alcaraz-Salarirche, Noelia; Gallardo-Gil, Monsalud; Herrera-Pastor, David; Servan-Nunez, Maria Jose

    2011-01-01

    We describe and analyse the action research process carried out by us as teachers in a general didactics course in the University of Malaga (Spain). The course methodology combined lectures to the whole class and small-group work. We were in charge of guiding small-group work. In the small groups, students researched on an educational innovation…

  17. Assessing Cognitive Processes with Diffusion Model Analyses: A Tutorial based on fast-dm-30

    Directory of Open Access Journals (Sweden)

    Andreas eVoss

    2015-03-01

    Full Text Available Diffusion models can be used to infer cognitive processes involved in fast binary decision tasks. The model assumes that information is accumulated continuously until one of two thresholds is hit. In the analysis, response time distributions from numerous trials of the decision task are used to estimate a set of parameters mapping distinct cognitive processes. In recent years, diffusion model analyses have become more and more popular in different fields of psychology. This increased popularity is based on the recent development of several software solutions for the parameter estimation. Although these programs make the application of the model relatively easy, there is a shortage of knowledge about different steps of a state-of-the-art diffusion model study. In this paper, we give a concise tutorial on diffusion modelling, and we present fast-dm-30, a thoroughly revised and extended version of the fast-dm software (Voss & Voss, 2007 for diffusion model data analysis. The most important improvement of the fast-dm version is the possibility to choose between different optimization criteria (i.e., Maximum Likelihood, Chi-Square, and Kolmogorov-Smirnov, which differ in applicability for different data sets.

  18. Karibu Tutorials

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    These tutorials demonstrate how to use Karibu for high quality data collection, in particular how to setup a distributed Karibu system and how to adapt Karibu to your particular data collection needs....

  19. Electromagnetism Tutorial (Tutorial de Eletromagnetismo)

    CERN Document Server

    Dantas, Christine C

    2009-01-01

    The present tutorial aims at covering the fundamentals of electromagnetism, in a condensed and clear manner. Some solved and proposed exercises have been included. The reader is assumed to have knowledge of basic electricity, partial derivatives and multiple integrals. ----- O presente tutorial visa cobrir os fundamentos do eletromagnetismo, de forma condensada e clara. Alguns exercicios resolvidos e propostos foram incluidos. Assume-se conhecimento de eletricidade basica, derivadas parciais e integrais multiplas.

  20. NVidia Tutorial

    CERN Document Server

    CERN. Geneva; MESSMER, Peter; DEMOUTH, Julien

    2015-01-01

    This tutorial will present Caffee, a powerful Python library to implement solutions working on CPUs and GPUs, and explain how to use it to build and train Convolutional Neural Networks using NVIDIA GPUs. The session requires no prior experience with GPUs or Caffee.

  1. Historical review of tutorial in education

    Directory of Open Access Journals (Sweden)

    María Gabriela Luna Pérez

    2015-01-01

    Full Text Available For centuries, tutorials have always been of an individual character in the history of education. The paper reviews how tutorials in education have evolved from ancient Greece to the present by considering taking into account the following aspects: a its general understanding, b the favorite areas of orientation c the role of learning guiding process d the supporting role of tutorials. We offer a historical account of tutorials development in Mexican Education. The study provides the main trends of tutorial activities in primary education, the evidence confirmed that tutoring has evolved from the learning of philosophical and ethical questions to the multiple learning involving competencies.

  2. Group Decision Making with the Analytic Hierarchy Process in Benefit-Risk Assessment: A Tutorial

    NARCIS (Netherlands)

    Hummel, J. Marjan; Bridges, John F.P.; IJzerman, Maarten J.

    2014-01-01

    The analytic hierarchy process (AHP) has been increasingly applied as a technique for multi-criteria decision analysis in healthcare. The AHP can aid decision makers in selecting the most valuable technology for patients, while taking into account multiple, and even conflicting, decision criteria. T

  3. COTS software selection process.

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, William M. (Strike Wire Technologies, Louisville, CO); Lin, Han Wei; McClelland, Kelly (U.S. Security Associates, Livermore, CA); Ullrich, Rebecca Ann; Khanjenoori, Soheil; Dalton, Karen; Lai, Anh Tri; Kuca, Michal; Pacheco, Sandra; Shaffer-Gant, Jessica

    2006-05-01

    Today's need for rapid software development has generated a great interest in employing Commercial-Off-The-Shelf (COTS) software products as a way of managing cost, developing time, and effort. With an abundance of COTS software packages to choose from, the problem now is how to systematically evaluate, rank, and select a COTS product that best meets the software project requirements and at the same time can leverage off the current corporate information technology architectural environment. This paper describes a systematic process for decision support in evaluating and ranking COTS software. Performed right after the requirements analysis, this process provides the evaluators with more concise, structural, and step-by-step activities for determining the best COTS software product with manageable risk. In addition, the process is presented in phases that are flexible to allow for customization or tailoring to meet various projects' requirements.

  4. Science Information Literacy Tutorials and Pedagogy

    Directory of Open Access Journals (Sweden)

    Ping Li

    2011-06-01

    Full Text Available Objective – This study examined information literacy tutorials in science. The goals of the research were to identify which of the information literacy standards for science, engineering and technology were addressed in the tutorials, and the extent that the tutorials incorporated good pedagogical elements.Methods – The researcher chose for review 31 of the tutorials selected by members of the ACRL Science & Technology Section (STS Information Literacy Committee. She carefully analyzed the tutorials and developed a database with codes for the topic of each tutorial, the STS information literacy standard(s addressed by the tutorial, and whether good pedagogical elements were incorporated. The entire analysis and coding procedure was repeated three times to ensure consistency.Results – The tutorials analyzed in this study covered various subjects and addressed all the (STS information literacy standards. The tutorials presented information clearly and allowed users to select their own learning paths. The incorporation of good pedagogical elements was limited, especially in relation to active learning elements.Conclusions – Web tutorials have been accepted as effective information literacy instruction tools and have been used to teach all elements of the STS information literacy standards. Yet, ensuring they provide a real learning experience for students remains a challenge. More serious thought needs to be given to integrating good pedagogy into these instructional tools in order to attain deep learning.

  5. Tutorial for Collecting and Processing Images of Composite Structures to Determine the Fiber Volume Fraction

    Science.gov (United States)

    Conklin, Lindsey

    2017-01-01

    Fiber-reinforced composite structures have become more common in aerospace components due to their light weight and structural efficiency. In general, the strength and stiffness of a composite structure are directly related to the fiber volume fraction, which is defined as the fraction of fiber volume to total volume of the composite. The most common method to measure the fiber volume fraction is acid digestion, which is a useful method when the total weight of the composite, the fiber weight, and the total weight can easily be obtained. However, acid digestion is a destructive test, so the material will no longer be available for additional characterization. Acid digestion can also be difficult to machine out specific components of a composite structure with complex geometries. These disadvantages of acid digestion led the author to develop a method to calculate the fiber volume fraction. The developed method uses optical microscopy to calculate the fiber area fraction based on images of the cross section of the composite. The fiber area fraction and fiber volume fraction are understood to be the same, based on the assumption that the shape and size of the fibers are consistent in the depth of the composite. This tutorial explains the developed method for optically determining fiber area fraction performed at NASA Langley Research Center.

  6. Electron transfer processes occurring on platinum neural stimulating electrodes: a tutorial on the i(V e) profile

    Science.gov (United States)

    Kumsa, Doe W.; Bhadra, Narendra; Hudak, Eric M.; Kelley, Shawn C.; Untereker, Darrel F.; Mortimer, J. Thomas

    2016-10-01

    The aim of this tutorial is to encourage members of the neuroprosthesis community to incorporate electron transfer processes into their thinking and provide them with the tools to do so when they design and work with neurostimulating devices. The focus of this article is on platinum because it is the most used electrode metal for devices in commercial use. The i(V e) profile or cyclic voltammogram contains information about electron transfer processes that can occur when the electrode-electrolyte interface, V e, is at a specific potential, and assumed to be near steady-state conditions. For the engineer/designer this means that if the potential is not in the range of a specific electron transfer process, that process cannot occur. An i(V e) profile, recorded at sweep rates greater than 0.1 mVs-1, approximates steady-state conditions. Rapid transient potential excursions, like that seen with neural stimulation pulses, may be too fast for the reaction to occur, however, this means that if the potential is in the range of a specific electron transfer process it may occur and should be considered. The approach described here can be used to describe the thermodynamic electron transfer processes on other candidate electrode metals, e.g. stainless steel, iridium, carbon-based, etc.

  7. Electron transfer processes occurring on platinum neural stimulating electrodes: a tutorial on the i(V e) profile.

    Science.gov (United States)

    Kumsa, Doe W; Bhadra, Narendra; Hudak, Eric M; Kelley, Shawn C; Untereker, Darrel F; Mortimer, J Thomas

    2016-10-01

    The aim of this tutorial is to encourage members of the neuroprosthesis community to incorporate electron transfer processes into their thinking and provide them with the tools to do so when they design and work with neurostimulating devices. The focus of this article is on platinum because it is the most used electrode metal for devices in commercial use. The i(V e) profile or cyclic voltammogram contains information about electron transfer processes that can occur when the electrode-electrolyte interface, V e, is at a specific potential, and assumed to be near steady-state conditions. For the engineer/designer this means that if the potential is not in the range of a specific electron transfer process, that process cannot occur. An i(V e) profile, recorded at sweep rates greater than 0.1 mVs(-1), approximates steady-state conditions. Rapid transient potential excursions, like that seen with neural stimulation pulses, may be too fast for the reaction to occur, however, this means that if the potential is in the range of a specific electron transfer process it may occur and should be considered. The approach described here can be used to describe the thermodynamic electron transfer processes on other candidate electrode metals, e.g. stainless steel, iridium, carbon-based, etc.

  8. A tutorial on the principles of harmonic intonation for trombonists

    Science.gov (United States)

    Keener, Michael Kenneth

    A Tutorial on the Principles of Harmonic Intonation for Trombonists includes a manual containing background information, explanations of the principles of harmonic intonation, and printed musical examples for use in learning and practicing the concepts of harmonic intonation. An audio compact disk containing music files corresponding to the printed music completes the set. This tutorial is designed to allow performing musicians and students to practice intonation skills with the pitch-controlled music on the compact disc. The music on the CD was recorded in movable-comma just intonation, replicating performance parameters of wind, string, and vocal ensembles. The compact disc includes sixty tracks of ear-training exercises and interval studies with which to practice intonation perception and adjustment. Tuning notes and examples of equal-tempered intervals and just intervals are included on the CD. The intonation exercises consist of musical major scales, duets, trios, and quartet phrases to be referenced while playing the printed music. The CD tracks allow the performer to play scales in unison (or practice other harmonic intervals) or the missing part of the corresponding duet, trio, or quartet exercise. Instructions in the manual guide the user through a process that can help prepare musicians for more accurate musical ensemble performance. The contextual essay that accompanies the tutorial includes a description of the tutorial, a review of related literature, methodology of construction of the tutorial, evaluations and outcomes, conclusions and recommendations for further research, and a selected bibliography.

  9. The Administrator Selection Process

    Science.gov (United States)

    Griffin, Michael F.

    1974-01-01

    Proposes that education establish for administrators systematic, rigorous, albeit subjective, selection procedures that recognize the principle of organizational democracy and the public nature of the educational enterprise. (Author/DN)

  10. The M-Wright function in time-fractional diffusion processes: a tutorial survey

    CERN Document Server

    Mainardi, Francesco; Pagnini, Gianni

    2010-01-01

    In the present review we survey the properties of a transcendental function of the Wright type, nowadays known as M-Wright function, entering as a probability density in a relevant class of self-similar stochastic processes that we generally refer to as time-fractional diffusion processes. Indeed, the master equations governing these processes generalize the standard diffusion equation by means of time-integral operators interpreted as derivatives of fractional order. When these generalized diffusion processes are properly characterized with stationary increments, the M-Wright function is shown to play the same key role as the Gaussian density in the standard and fractional Brownian motions. Furthermore, these processes provide stochastic models suitable for describing phenomena of anomalous diffusion of both slow and fast type.

  11. ARM Mentor Selection Process

    Energy Technology Data Exchange (ETDEWEB)

    Sisterson, D. L. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-10-01

    The Atmospheric Radiation Measurement (ARM) Program was created in 1989 with funding from the U.S. Department of Energy (DOE) to develop several highly instrumented ground stations to study cloud formation processes and their influence on radiative transfer. In 2003, the ARM Program became a national scientific user facility, known as the ARM Climate Research Facility. This scientific infrastructure provides for fixed sites, mobile facilities, an aerial facility, and a data archive available for use by scientists worldwide through the ARM Climate Research Facility—a scientific user facility. The ARM Climate Research Facility currently operates more than 300 instrument systems that provide ground-based observations of the atmospheric column. To keep ARM at the forefront of climate observations, the ARM infrastructure depends heavily on instrument scientists and engineers, also known as lead mentors. Lead mentors must have an excellent understanding of in situ and remote-sensing instrumentation theory and operation and have comprehensive knowledge of critical scale-dependent atmospheric processes. They must also possess the technical and analytical skills to develop new data retrievals that provide innovative approaches for creating research-quality data sets. The ARM Climate Research Facility is seeking the best overall qualified candidate who can fulfill lead mentor requirements in a timely manner.

  12. AAPM/RSNA physics tutorial for residents: topics in CT. Image processing in CT.

    Science.gov (United States)

    Cody, Dianna D

    2002-01-01

    Several image-processing methods for computed tomographic (CT) examinations are currently being used in clinical radiology departments. Image processing involves operations such as reformatting of original CT images, volume-rendered displays, surface-rendered displays, and physiologic imaging analysis. The reformatting process does not alter the CT voxels in any way; instead it uses them in off-axis views and displays the images produced from the original reconstruction process in an orientation other than how they were originally generated. Sagittal, coronal, oblique, and curved reformatting are standard reformatting methods. Other reformatting techniques include maximum-intensity projection, minimum-intensity projection, and variable thickness viewing. Volume and surface rendering are two different methods for reformatting axial images into three-dimensional views. CT perfusion allows the measurement of physiologic parameters over time. Additional postprocessing efforts can potentially add value to the patients and their outcomes, as can be seen in the cases that illustrate this article.

  13. Learning and Selection Processes

    Directory of Open Access Journals (Sweden)

    Marc Artiga

    2010-06-01

    Full Text Available Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In this paper I defend a teleological explanation of normativity, i. e., I argue that what an organism (or device is supposed to do is determined by its etiological function. In particular, I present a teleological account of the normativity that arises in learning processes, and I defend it from some objections.

  14. Multiple Conceptual Coherences in the Speed Tutorial: Micro-processes of Local Stability

    CERN Document Server

    Frank, Brian W

    2010-01-01

    Researchers working within knowledge-in-pieces traditions have often employed observational approaches to investigate micro-processes of learning. There is growing evidence from this line of work that students' intuitive thinking about physical phenomena is characterized more so by its diversity and flexibility than its uniformity and robustness. This characterization implies that much of the dynamics of students' thinking over short timescales involve processes that stabilize local patterns of thinking, later destabilize them, and allow other patterns to form. This kind of "change" may only involve dynamics by which the system of intuitive knowledge settles into various states without changing the system structure itself. I describe a case study in which a group of college students shift their thinking about motion several times during a collaborative learning activity. Instead of focusing on micro-processes of change, I describe these dynamics in terms of mechanisms that contribute to local stability of stu...

  15. The time dependence of rock healing as a universal relaxation process, a tutorial

    Science.gov (United States)

    Snieder, Roel; Sens-Schönfelder, Christoph; Wu, Renjie

    2017-01-01

    The material properties of earth materials often change after the material has been perturbed (slow dynamics). For example, the seismic velocity of subsurface materials changes after earthquakes, and granular materials compact after being shaken. Such relaxation processes are associated by observables that change logarithmically with time. Since the logarithm diverges for short and long times, the relaxation can, strictly speaking, not have a log-time dependence. We present a self-contained description of a relaxation function that consists of a superposition of decaying exponentials that has log-time behaviour for intermediate times, but converges to zero for long times, and is finite for t = 0. The relaxation function depends on two parameters, the minimum and maximum relaxation time. These parameters can, in principle, be extracted from the observed relaxation. As an example, we present a crude model of a fracture that is closing under an external stress. Although the fracture model violates some of the assumptions on which the relaxation function is based, it follows the relaxation function well. We provide qualitative arguments that the relaxation process, just like the Gutenberg-Richter law, is applicable to a wide range of systems and has universal properties.

  16. Attojoule Optoelectronics for Low-Energy Information Processing and Communications: a Tutorial Review

    CERN Document Server

    Miller, David A B

    2016-01-01

    Optics offers unique opportunities for reducing energy in information processing and communications while resolving the problem of interconnect bandwidth density inside machines. Such energy dissipation overall is now at environmentally significant levels; the source of that dissipation is progressively shifting from logic operations to interconnect energies. Without the prospect of substantial reduction in energy per bit communicated, we cannot continue the exponential growth of our use of information. The physics of optics and optoelectronics fundamentally addresses both interconnect energy and bandwidth density, and optics may be the only scalable solution to such problems. Here we summarize the corresponding background, status, opportunities, and research directions for optoelectronic technology and novel optics, including sub-femtojoule devices in waveguide and novel 2D array optical systems. We compare different approaches to low-energy optoelectronic output devices and their scaling, including lasers, ...

  17. CRJ 305 ASH Tutorial/ Uoptutorial

    OpenAIRE

    venkatesh

    2015-01-01

    For more course tutorials visit   www.uoptutorial.com       Law - General Law Factors that Cause Crime. In Chapter 1 of Crime Prevention, the author discusses factors that cause crime. Select a specific crime or criminal issue. What are three factors that lead to the crime or criminal justice issue you identified? Identify possible solutions to the crime or criminal justice issue you selected. Why do you think these solutions would be effective ...

  18. CJS 211 Course Tutorial/TutorialRank

    OpenAIRE

    candice

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 8 Times, Rating: A+   CJS 211 Week 1 Individual Assignment Ethical Dilemma Paper CJS 211 Week 1 DQ 1 CJS 211 Week 1 DQ 2 CJS 211 Week 2 Individual Assignment Ethical Dilemma Worksheet Law Enforcement CJS 211 Week 2 DQ 1 CJS 211 Week 2 DQ 2 CJS 211 Week 2 Team Assignment Ethical Decision Making Paper CJS 211 Week 3 Individual Assignment Ethical Dilemma Worksheet Prosecutors...

  19. Sexual selection: Another Darwinian process.

    Science.gov (United States)

    Gayon, Jean

    2010-02-01

    the Darwin-Wallace controversy was that most Darwinian biologists avoided the subject of sexual selection until at least the 1950s, Ronald Fisher being a major exception. This controversy still deserves attention from modern evolutionary biologists, because the modern approach inherits from both Darwin and Wallace. The modern approach tends to present sexual selection as a special aspect of the theory of natural selection, although it also recognizes the big difficulties resulting from the inevitable interaction between these two natural processes of selection. And contra Wallace, it considers mate choice as a major process that deserves a proper evolutionary treatment. The paper's conclusion explains why sexual selection can be taken as a test case for a proper assessment of "Darwinism" as a scientific tradition. Darwin's and Wallace's attitudes towards sexual selection reveal two different interpretations of the principle of natural selection: Wallace's had an environmentalist conception of natural selection, whereas Darwin was primarily sensitive to the element of competition involved in the intimate mechanism of any natural process of selection. Sexual selection, which can lack adaptive significance, reveals this exemplarily.

  20. Library Materials: Selection and Processing.

    Science.gov (United States)

    Freeman, Michael; And Others

    This script of a slide-tape presentation, which describes the selection and processing of materials for a university library, includes commentary with indicators for specific slide placement. Distinction is made between books and serial publications and the materials are followed from the ordering decision through processing. The role of the…

  1. Fuzzy Control Tutorial

    DEFF Research Database (Denmark)

    Dotoli, M.; Jantzen, Jan

    1999-01-01

    The tutorial concerns automatic control of an inverted pendulum, especially rule based control by means of fuzzy logic. A ball balancer, implemented in a software simulator in Matlab, is used as a practical case study. The objectives of the tutorial are to teach the basics of fuzzy control......, and to show how to apply fuzzy logic in automatic control. The tutorial is distance learning, where students interact one-to-one with the teacher using e-mail....

  2. Fuzzy Control Tutorial

    DEFF Research Database (Denmark)

    Dotoli, M.; Jantzen, Jan

    1999-01-01

    The tutorial concerns automatic control of an inverted pendulum, especially rule based control by means of fuzzy logic. A ball balancer, implemented in a software simulator in Matlab, is used as a practical case study. The objectives of the tutorial are to teach the basics of fuzzy control, and t......, and to show how to apply fuzzy logic in automatic control. The tutorial is distance learning, where students interact one-to-one with the teacher using e-mail....

  3. Generating Consistent Program Tutorials

    DEFF Research Database (Denmark)

    Vestdam, Thomas

    2002-01-01

    In this paper we present a tool that supports construction of program tutorials. A program tutorial provides the reader with an understanding of an example program by interleaving fragments of source code and explaining text. An example program can for example illustrate how to use a library...

  4. 2014 CESM Tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Marika

    2014-08-11

    The 2014 annual tutorial for the Community Earth System Model (CESM) was held on August 11-August 15, 2014 at the National Center for Atmospheric Research in Boulder, CO. It included lectures and practical sessions on numerous aspects of the CESM model. The proceedings submitted here include a description of the tutorial.

  5. Hadoop Tutorials - Hadoop Foundations

    CERN Document Server

    CERN. Geneva; Lanza Garcia, Daniel

    2016-01-01

    The Hadoop ecosystem is the leading opensource platform for distributed storage and processing of "big data". The Hadoop platform is available at CERN as a central service provided by the IT department. This tutorial organized by the IT Hadoop service, aims to introduce the main concepts about Hadoop technology in a practical way and is targeted to those who would like to start using the service for distributed parallel data processing. The main topics that will be covered are: Hadoop architecture and available components How to perform distributed parallel processing in order to explore and create reports with SQL (with Apache Impala) on example data. Using a HUE - Hadoop web UI for presenting the results in user friendly way. How to format and/or structure data in order to make data processing more efficient - by using various data formats/containers and partitioning techniques (Avro, Parquet, HBase). ...

  6. Adult nutrition assessment tutorial

    Science.gov (United States)

    This tutorial presents a systematic approach to nutrition assessment based on a modern appreciation for the contributions of inflammation that serve as the foundation for newly proposed consensus definitions for malnutrition syndromes. Practical indicators of malnutrition and inflammation have been ...

  7. Students and tutors' social representations of assessment in problem-based learning tutorials supporting change

    Directory of Open Access Journals (Sweden)

    Bollela Valdes R

    2009-06-01

    Full Text Available Abstract Background Medical programmes that implement problem-based learning (PBL face several challenges when introducing this innovative learning method. PBL relies on small group as the foundation of study, and tutors facilitate learning by guiding the process rather than teaching the group. One of the major challenges is the use of strategies to assess students working in small groups. Self-, peer- and tutor-assessment are integral part of PBL tutorials and they're not easy to perform, especially for non experienced students and tutors. The undergraduate PBL medical programme was introduced in 2003, and after two years the curriculum committee decided to evaluate the tutorial assessment in the new program. Methods A random group of ten students, out of a cohort of sixty, and ten tutors (out of eighteen were selected for semi-structured interviews. The social representations' theory was used to explore how the students and tutors made sense of "assessment in tutorials". The data were content analyzed using software for qualitative and quantitative processing of text according to lexicological distribution patterns. Results Even though students and tutors are aware of the broader purpose of assessment, they felt that they were not enough trained and confident to the tutorial assessment. Assigning numbers to complex behaviors on a regular basis, as in tutorials, is counter productive to cooperative group learning and self assessment. Tutors believe that students are immature and not able to assess themselves and tutors. Students believe that good grades are closely related to good oral presentation skills and also showed a corporative attitude among themselves (protecting each other from poor grades. Conclusion Faculty training on PBL tutorials' assessment process and a systematic strategy to evaluate new programs is absolutely necessary to review and correct directions. It is envisaged that planners can make better-informed decisions about

  8. A Shape Dynamics Tutorial

    CERN Document Server

    Mercati, Flavio

    2014-01-01

    Shape Dynamics (SD) is a new theory of gravity that is based on fewer and more fundamental first principles than General Relativity (GR). The most important feature of SD is the replacement of GR's relativity of simultaneity with a more tractable gauge symmetry, namely invariance under spatial conformal transformations. This Tutorial contains both a quick introduction for readers curious about SD and a detailed walk-through of the historical and conceptual motivations for the theory, its logical development from first principles and an in-depth description of its present status. The Tutorial is sufficiently self-contained for an undergrad student with some basic background in General Relativity and Lagrangian/Hamiltonian mechanics. It is intended both as a reference text for students approaching the subject, and as a review article for researchers interested in the theory. This is a first version of the Tutorial, which will be periodically expanded and updated with the latest results.

  9. Plane geometry drawing tutorial

    Directory of Open Access Journals (Sweden)

    Eduardo Gutiérrez de Ravé

    2014-01-01

    Full Text Available Se ha desarrollado un tutorial para facilitar la docencia del d ibujo geométrico. Con la idea de servir de apoyo a las explicac iones teóricas y prácticas de los conceptos correspondientes a los trazados ge ométricos planos necesarios en la ingeniería. Este tutorial es de fácil manejo y permite interactividad con el usuario, animaciones prá cticas, autoevaluaciones, explicaciones amplias del temario y l a enseñanza "paso a paso" de los conceptos gracias a los diferent es niveles de complejidad conceptual que incluye en su contenido.

  10. A Tutorial on UPPAAL

    DEFF Research Database (Denmark)

    Behrmann, Gerd; David, Alexandre; Larsen, Kim Guldstrand

    2004-01-01

    This is a tutorial paper on the tool Uppaal. Its goal is to be a short introduction on the flavor of timed automata implemented in the tool, to present its interface, and to explain how to use the tool. The contribution of the paper is to provide reference examples and modeling patterns.......This is a tutorial paper on the tool Uppaal. Its goal is to be a short introduction on the flavor of timed automata implemented in the tool, to present its interface, and to explain how to use the tool. The contribution of the paper is to provide reference examples and modeling patterns....

  11. 15 CFR 2301.18 - Selection process.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Selection process. 2301.18 Section 2301.18 Commerce and Foreign Trade Regulations Relating to Telecommunications and Information NATIONAL... PROGRAM Evaluation and Selection Process § 2301.18 Selection process. (a) The PTFP Director will...

  12. Innovation During the Supplier Selection Process

    DEFF Research Database (Denmark)

    Pilkington, Alan; Pedraza, Isabel

    2014-01-01

    Established ideas on supplier selection have not moved much from the original premise of how to choose between bidders. Whilst we have added many different tools and refinements to choose between alternative suppliers, its nature has not evolved. We move the original selection process approach...... observed through an ethnographic embedded researcher study has refined the selection process and has two selection stages one for first supply covering tool/process developed and another later for resupply of mature parts. We report the details of the process, those involved, the criteria employed...... and identify benefits and weaknesses of this enhanced selection process....

  13. Tutorial to SARAH

    CERN Document Server

    Staub, Florian

    2016-01-01

    I give in this brief tutorial a short practical introduction to the Mathematica package SARAH. First, it is shown how an existing model file can be changed to implement a new model in SARAH. In the second part, masses, vertices and renormalisation group equations are calculated with SARAH. Finally, the main commands to generate model files and output for other tools are summarised.

  14. Fiber Nonlinearities: A Tutorial

    Institute of Scientific and Technical Information of China (English)

    Govind P. Agrawal

    2003-01-01

    Fiber nonlinearities have long been regarded as being mostly harmful for fiber-optic communication systems. Over the last few years, however, the nonlinear effects are increasingly being used for practical telecommunications applications,the Raman amplification being only one of the recent examples. In this tutorial I review the vario us nonlinear effects occurring in optical fibers from both standpoints..

  15. Fiber Nonlinearities: A Tutorial

    Institute of Scientific and Technical Information of China (English)

    Govind; P.; Agrawal

    2003-01-01

    Fiber nonlinearities have long been regarded as being mostly harmful for fiber-optic communication systems. Over the last few years, however, the nonlinear effects are increasingly being used for practical telecommunications applications, the Raman amplification being only one of the recent examples. In this tutorial I review the various nonlinear effects occurring in optical fibers from both standpoints..

  16. Tutorial on architectural acoustics

    Science.gov (United States)

    Shaw, Neil; Talaske, Rick; Bistafa, Sylvio

    2002-11-01

    This tutorial is intended to provide an overview of current knowledge and practice in architectural acoustics. Topics covered will include basic concepts and history, acoustics of small rooms (small rooms for speech such as classrooms and meeting rooms, music studios, small critical listening spaces such as home theatres) and the acoustics of large rooms (larger assembly halls, auditoria, and performance halls).

  17. Hyperspectral image analysis. A tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Amigo, José Manuel, E-mail: jmar@food.ku.dk [Spectroscopy and Chemometrics Group, Department of Food Sciences, Faculty of Science, University of Copenhagen, Rolighedsvej 30, Frederiksberg C DK–1958 (Denmark); Babamoradi, Hamid [Spectroscopy and Chemometrics Group, Department of Food Sciences, Faculty of Science, University of Copenhagen, Rolighedsvej 30, Frederiksberg C DK–1958 (Denmark); Elcoroaristizabal, Saioa [Spectroscopy and Chemometrics Group, Department of Food Sciences, Faculty of Science, University of Copenhagen, Rolighedsvej 30, Frederiksberg C DK–1958 (Denmark); Chemical and Environmental Engineering Department, School of Engineering, University of the Basque Country, Alameda de Urquijo s/n, E-48013 Bilbao (Spain)

    2015-10-08

    This tutorial aims at providing guidelines and practical tools to assist with the analysis of hyperspectral images. Topics like hyperspectral image acquisition, image pre-processing, multivariate exploratory analysis, hyperspectral image resolution, classification and final digital image processing will be exposed, and some guidelines given and discussed. Due to the broad character of current applications and the vast number of multivariate methods available, this paper has focused on an industrial chemical framework to explain, in a step-wise manner, how to develop a classification methodology to differentiate between several types of plastics by using Near infrared hyperspectral imaging and Partial Least Squares – Discriminant Analysis. Thus, the reader is guided through every single step and oriented in order to adapt those strategies to the user's case. - Highlights: • Comprehensive tutorial of Hyperspectral Image analysis. • Hierarchical discrimination of six classes of plastics containing flame retardant. • Step by step guidelines to perform class-modeling on hyperspectral images. • Fusion of multivariate data analysis and digital image processing methods. • Promising methodology for real-time detection of plastics containing flame retardant.

  18. All 2006 ATLAS Tutorials online

    CERN Multimedia

    Steven Goldfarb,; Mitch McLachlan,; Homer A. Neal

    The University of Michigan has completed its full agenda of Web Lecture recording for ATLAS for 2006. The archives include all three ATLAS Week Plenary Sessions, as well as a large variety of tutorials. They are accessible at target="_top" this location. Viewing requires a standard web browser with RealPlayer plug-in (included in most browsers automatically) and works on any major platform. This is the first year our group has been asked to provide this complete service to the collaboration, so any and all feedback is welcome. We would especially like to know if you had any difficulties viewing the lectures, if you found the selection of material to be useful, and/or if you think there are any other specific events we ought to cover in 2007. Please send you comments to wlap@umich.edu. We look forward to bringing you a rich variety of new lectures in 2007, starting with the ATLAS Distributed Computing Tutorial on Feb 1, 2 in Edinburgh and concluding with the Higgs discovery talk (of course). Enjoy the Lec...

  19. Online Bioinformatics Tutorials | Office of Cancer Genomics

    Science.gov (United States)

    Bioinformatics is a scientific discipline that applies computer science and information technology to help understand biological processes. The NIH provides a list of free online bioinformatics tutorials, either generated by the NIH Library or other institutes, which includes introductory lectures and "how to" videos on using various tools.

  20. Information Selection in Intelligence Processing

    Science.gov (United States)

    2011-12-01

    problem of overload.” As another example, Whaley (Whaley, 1974) argues that one of the causes for the Pearl Harbor and Barbarossa strategic surprises is...which becomes more and more important as the Internet evolves. The IR problem and the information selection problem share some similar...all the algorithms tend more towards exploration: the temperature parameter in Softmax is higher (0.12 instead of 0.08), the delta for the VDBE

  1. Selecting a plutonium vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Jouan, A. [Centre d`Etudes de la Vallee du Rhone, Bagnols sur Ceze (France)

    1996-05-01

    Vitrification of plutonium is one means of mitigating its potential danger. This option is technically feasible, even if it is not the solution advocated in France. Two situations are possible, depending on whether or not the glass matrix also contains fission products; concentrations of up to 15% should be achievable for plutonium alone, whereas the upper limit is 3% in the presence of fission products. The French continuous vitrification process appears to be particularly suitable for plutonium vitrification: its capacity is compatible with the required throughout, and the compact dimensions of the process equipment prevent a criticality hazard. Preprocessing of plutonium metal, to convert it to PuO{sub 2} or to a nitric acid solution, may prove advantageous or even necessary depending on whether a dry or wet process is adopted. The process may involve a single step (vitrification of Pu or PuO{sub 2} mixed with glass frit) or may include a prior calcination step - notably if the plutonium is to be incorporated into a fission product glass. It is important to weigh the advantages and drawbacks of all the possible options in terms of feasibility, safety and cost-effectiveness.

  2. Tutorial on Superconducting Accelerator Magnets

    Science.gov (United States)

    Ball, M. J. Penny; Goodzeit, Carl L.

    1997-05-01

    A multimedia CD-ROM tutorial on the physics and engineering concepts of superconducting magnets for particle accelerators is being developed under a U.S. Dept. of Energy SBIR grant. The tutorial, scheduled for distribution this summer, is targeted to undergraduate junior or senior level science students. However, its unified presentation of the broad range of issues involved in the design of superconducting magnets for accelerators and the extensive detail about the construction process (including animations and video clips) will also be of value to staff of research institutes and industrial concerns with an interest in applied superconductivity or magnet development. The source material, which is based on the world-wide R and D programs to develop superconducting accelerator magnets, is organized in five units with the following themes: Introduction to magnets and accelerators; (2) Superconductors for accelerator magnets; (3) Magnetic design methods for accelerator magnets; (4) Electrical, mechanical, and cryogenic considerations for the final magnet package; (5) Performance characteristics and measurement methods. A detailed outline and examples will be shown.

  3. Reinforcement Learning: A Tutorial.

    Science.gov (United States)

    1997-01-01

    The purpose of this tutorial is to provide an introduction to reinforcement learning (RL) at a level easily understood by students and researchers in...provides a simple example to develop intuition of the underlying dynamic programming mechanism. In Section (2) the parts of a reinforcement learning problem... reinforcement learning algorithms. These include TD(lambda) and both the residual and direct forms of value iteration, Q-learning, and advantage learning

  4. ARM Lead Mentor Selection Process

    Energy Technology Data Exchange (ETDEWEB)

    Sisterson, DL

    2013-03-13

    The ARM Climate Research Facility currently operates more than 300 instrument systems that provide ground-based observations of the atmospheric column. To keep ARM at the forefront of climate observations, the ARM infrastructure depends heavily on instrument scientists and engineers, also known as Instrument Mentors. Instrument Mentors must have an excellent understanding of in situ and remote-sensing instrumentation theory and operation and have comprehensive knowledge of critical scale-dependent atmospheric processes. They also possess the technical and analytical skills to develop new data retrievals that provide innovative approaches for creating research-quality data sets.

  5. 44 CFR 150.7 - Selection process.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Selection process. 150.7 Section 150.7 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF... Selection process. (a) President's Award. Nominations for the President's Award shall be reviewed,...

  6. 7 CFR 3570.68 - Selection process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Selection process. 3570.68 Section 3570.68 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, DEPARTMENT OF AGRICULTURE COMMUNITY PROGRAMS Community Facilities Grant Program § 3570.68 Selection process. Each...

  7. RT3D tutorials for GMS users

    Energy Technology Data Exchange (ETDEWEB)

    Clement, T.P. [Pacific Northwest National Lab., Richland, WA (United States); Jones, N.L. [Brigham Young Univ., Provo, UT (United States)

    1998-02-01

    RT3D (Reactive Transport in 3-Dimensions) is a computer code that solves coupled partial differential equations that describe reactive-flow and transport of multiple mobile and/or immobile species in a three dimensional saturated porous media. RT3D was developed from the single-species transport code, MT3D (DoD-1.5, 1997 version). As with MT3D, RT3D also uses the USGS groundwater flow model MODFLOW for computing spatial and temporal variations in groundwater head distribution. This report presents a set of tutorial problems that are designed to illustrate how RT3D simulations can be performed within the Department of Defense Groundwater Modeling System (GMS). GMS serves as a pre- and post-processing interface for RT3D. GMS can be used to define all the input files needed by RT3D code, and later the code can be launched from within GMS and run as a separate application. Once the RT3D simulation is completed, the solution can be imported to GMS for graphical post-processing. RT3D v1.0 supports several reaction packages that can be used for simulating different types of reactive contaminants. Each of the tutorials, described below, provides training on a different RT3D reaction package. Each reaction package has different input requirements, and the tutorials are designed to describe these differences. Furthermore, the tutorials illustrate the various options available in GMS for graphical post-processing of RT3D results. Users are strongly encouraged to complete the tutorials before attempting to use RT3D and GMS on a routine basis.

  8. Hadoop Tutorial - Efficient data ingestion

    CERN Document Server

    CERN. Geneva; Baranowski, Zbigniew

    2016-01-01

    The Hadoop ecosystem is the leading opensource platform for distributed storage and processing of "big data". The Hadoop platform is available at CERN as a central service provided by the IT department. Real-time data ingestion to Hadoop ecosystem due to the system specificity is non-trivial process and requires some efforts (which is often underestimated) in order to make it efficient (low latency, optimize data placement, footprint on the cluster). In this tutorial attendees will learn about: The important aspects of storing the data in Hadoop Distributed File System (HDFS).  Data ingestion techniques and engines that are capable of shipping data to Hadoop in an efficient way. Setting up a full data ingestion flow into a Hadoop Distributed Files System from various sources (streaming, log files, databases) using the best practices and components available around the ecosystem (including Sqoop, Kite, Flume, Kafka...

  9. FIN 320 UOP Course Tutorial/TutorialRank

    OpenAIRE

    apj

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 0 Times, Rating: No Rating   What are differences between accounting and finance? What are the roles of financial managers? What are their fiduciary responsibilities? By what ethical standards should they abide?

  10. FIN 320(UOP) UOP Course Tutorial/TutorialRank

    OpenAIRE

    apj

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 0 Times, Rating: No Rating   What are differences between accounting and finance? What are the roles of financial managers? What are their fiduciary responsibilities? By what ethical standards should they abide?

  11. Roughness parameter selection for novel manufacturing processes.

    Science.gov (United States)

    Ham, M; Powers, B M

    2014-01-01

    This work proposes a method of roughness parameter (RP) selection for novel manufacturing processes or processes where little knowledge exists about which RPs are important. The method selects a single parameter to represent a group of highly correlated parameters. Single point incremental forming (SPIF) is used as the case study for the manufacturing process. This methodology was successful in reducing the number of RPs investigated from 18 to 8 in the case study. © Wiley Periodicals, Inc.

  12. Hyperspectral image analysis. A tutorial

    DEFF Research Database (Denmark)

    Amigo Rubio, Jose Manuel; Babamoradi, Hamid; Elcoroaristizabal Martin, Saioa

    2015-01-01

    This tutorial aims at providing guidelines and practical tools to assist with the analysis of hyperspectral images. Topics like hyperspectral image acquisition, image pre-processing, multivariate exploratory analysis, hyperspectral image resolution, classification and final digital image processi...... to differentiate between several types of plastics by using Near infrared hyperspectral imaging and Partial Least Squares - Discriminant Analysis. Thus, the reader is guided through every single step and oriented in order to adapt those strategies to the user's case....... will be exposed, and some guidelines given and discussed. Due to the broad character of current applications and the vast number of multivariate methods available, this paper has focused on an industrial chemical framework to explain, in a step-wise manner, how to develop a classification methodology...

  13. The MAGIC of Web Tutorials: How One Library (Re)Focused Its Delivery of Online Learning Objects on Users

    Science.gov (United States)

    Hess, Amanda Nichols

    2013-01-01

    Oakland University (OU) Libraries undertook an assessment of how to leverage its resources to make online tutorials more focused on users' needs. A multi-part assessment process reconsidered Web tutorials offerings through the lenses of faculty and staff feedback, literature review, and an analysis of other universities' online tutorial offerings.…

  14. Uptodate: tutorial. Desembre 2010

    OpenAIRE

    Universitat de Barcelona. CRAI

    2010-01-01

    Tutorial de consulta de base de dades UpToDate, de medicina clínica basada en l'evidència Uptodate. Proporciona accés sintetitzat a informació mèdica. Conté revisions originals escrites per reconeguts experts que analitzen casos clínics concrets i proporcionen les recomanacions pertinents. Centrat en resoldre qüestions sobre l'atenció als pacients i facilitar la pressa de decisions en la pràctica clínica diària.

  15. Basic Radar Altimetry Toolbox & Tutorial

    Science.gov (United States)

    Rosmorduc, Vinca; Benveniste, Jerome; Breebaart, Leo; Bronner, Emilie; Dinardo, Salvatore; Earith, Didier; Lucas, Bruno Manuel; Niejmeier, Sander; Picot, Nicolas

    2010-12-01

    The Basic Radar Altimetry Toolbox is an "all-altimeter" collection of tools, tutorials and documents designed to facilitate the use of radar altimetry data, including the last mission launched, CryoSat. It has been available from April 2007, and had been demonstrated during training courses and scientific meetings. Nearly 1200 people downloaded it (as of end of June 2010), with many "newcomers" to altimetry among them. Users' feedbacks, developments in altimetry, and practice, showed that new interesting features could be added. Some have been added and/or improved in version 2. Others are ongoing, some are in discussion. The Basic Radar Altimetry Toolbox is able: - to read most distributed radar altimetry data, from ERS-1 & 2, Topex/Poseidon, Geosat Follow-on, Jason- 1, Envisat, Jason- 2, CryoSat and also the future Saral and Sentinel 3 missions, - to perform some processing, data editing and statistic, - and to visualize the results. It can be used at several levels/several ways: - as a data reading tool, with APIs for C, Fortran, Matlab and IDL - as processing/extraction routines, through the on-line command mode - as an educational and a quick-look tool both, with the graphical user interface As part of the Toolbox, a Radar Altimetry Tutorial gives general information about altimetry, the technique involved and its applications, as well as an overview of past, present and future missions, including information on how to access data, additional software and documentation. It also presents a series of data use cases, covering all uses of altimetry over ocean, cryosphere and land, showing the basic methods for some of the most frequent manners of using altimetry data. BRAT is developed under contract with ESA and CNES. It is available at http://www.altimetry.info and http://earth.esa.int/brat/

  16. Manufacturing process and material selection in concurrent collaborative design of MEMS devices

    Science.gov (United States)

    Zha, Xuan F.; Du, H.

    2003-09-01

    In this paper we present knowledge of an intensive approach and system for selecting suitable manufacturing processes and materials for microelectromechanical systems (MEMS) devices in concurrent collaborative design environment. In the paper, fundamental issues on MEMS manufacturing process and material selection such as concurrent design framework, manufacturing process and material hierarchies, and selection strategy are first addressed. Then, a fuzzy decision support scheme for a multi-criteria decision-making problem is proposed for estimating, ranking and selecting possible manufacturing processes, materials and their combinations. A Web-based prototype advisory system for the MEMS manufacturing process and material selection, WebMEMS-MASS, is developed based on the client-knowledge server architecture and framework to help the designer find good processes and materials for MEMS devices. The system, as one of the important parts of an advanced simulation and modeling tool for MEMS design, is a concept level process and material selection tool, which can be used as a standalone application or a Java applet via the Web. The running sessions of the system are inter-linked with webpages of tutorials and reference pages to explain the facets, fabrication processes and material choices, and calculations and reasoning in selection are performed using process capability and material property data from a remote Web-based database and interactive knowledge base that can be maintained and updated via the Internet. The use of the developed system including operation scenario, use support, and integration with an MEMS collaborative design system is presented. Finally, an illustration example is provided.

  17. An integrated model for supplier selection process

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In today's highly competitive manufacturing environment, the supplier selection process becomes one of crucial activities in supply chain management. In order to select the best supplier(s) it is not only necessary to continuously tracking and benchmarking performance of suppliers but also to make a tradeoff between tangible and intangible factors some of which may conflict. In this paper an integration of case-based reasoning (CBR), analytical network process (ANP) and linear programming (LP) is proposed to solve the supplier selection problem.

  18. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2002-01-01

    that designers often limit their selection of materials and processes to a few well-known ones. Designers need to expand the solution space by considering more materials and processes. But they have to be convinced that the materials and processes are likely candidates that are worth investing time in exploring...... a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics.......The objective of the paper is to suggest a different procedure for selecting materials and processes within the product development work. The procedure includes using product examples in order to increase the number of alternative materials and processes that is considered. Product examples can...

  19. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2001-01-01

    that designers often limit their selection of materials and processes to a few well-known ones. Designers need to expand the solution space by considering more materials and processes. But they have to be convinced that the materials and processes are likely candidates that are worth investing time in exploring...... a search engine, and through hyperlinks can relevant materials and processes be explored. Realising that designers are very sensitive to user interfaces do all descriptions of materials, processes and products include graphical descriptions, i.e. pictures or computer graphics.......The objective of the paper is to suggest a different procedure for selecting materials and processes within the product development work. The procedure includes using product examples in order to increase the number of alternative materials and processes that is considered. Product examples can...

  20. Selective hydrogenation processes in steam cracking

    Energy Technology Data Exchange (ETDEWEB)

    Bender, M.; Schroeter, M.K.; Hinrichs, M.; Makarczyk, P. [BASF SE, Ludwigshafen (Germany)

    2010-12-30

    Hydrogen is the key elixir used to trim the quality of olefinic and aromatic product slates from steam crackers. Being co-produced in excess amounts in the thermal cracking process a small part of the hydrogen is consumed in the ''cold part'' of a steam cracker to selectively hydrogenate unwanted, unsaturated hydrocarbons. The compositions of the various steam cracker product streams are adjusted by these processes to the outlet specifications. This presentation gives an overview over state-of-art selective hydrogenation technologies available from BASF for these processes. (Published in summary form only) (orig.)

  1. Performance of the tutorial function in the Professor of Hematology, specialty: Clinical Laboratory.

    Directory of Open Access Journals (Sweden)

    Oriol Meneses Echemendia

    2014-09-01

    Full Text Available In the context of the battle of ideas, arises the career, degree in health technology, imposing new challenges to the medical university context, inserting new actors to the teaching - learning process and with them the professor-tutor's figure. For that reason , an evaluative project was developed in the hematology profile in the specialty of clinical laboratory, with the purpose of elaborating a strategy for the improvement of the teaching tutorial, on the base of systematic-structural-functional model; giving answer to the main detected problems. To carry out the study was used a qualitative focus, selecting the integrated paradigm. It was done an investigation action in the seven municipal university headquarters of the county where the process of teaching-learning of the new pedagogic model is developed in the profile. once selecting the scale of priority of the detected difficulties using the interaction and the interdependence among investigator and investigated, the "methodological strategy for the improvement of the teaching tutorial in hematology of clinical laboratory" was designed to propose three strategic actions, valued positively by the expert ones who endorsed the feasibility and effectiveness of their setting in practice to contribute to the improvement of the teaching tutorial in the formation of health technologies.

  2. Material and process selection using product examples

    DEFF Research Database (Denmark)

    Lenau, Torben Anker

    2001-01-01

    The objective of the paper is to suggest a different procedure for selecting materials and processes within the product development work. The procedure includes using product examples in order to increase the number of alternative materials and processes that is considered. Product examples can...... communicate information about materials and processes in a very concentrated and effective way. The product examples represent desired material properties but also includes information that can not be associated directly to the material, e.g. functional or perceived attributes. Previous studies suggest...... that designers often limit their selection of materials and processes to a few well-known ones. Designers need to expand the solution space by considering more materials and processes. But they have to be convinced that the materials and processes are likely candidates that are worth investing time in exploring...

  3. The MueLu Tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Jonathan Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wiesner, Tobias A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Prokopenko, Andrey [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gee, Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    The MueLu tutorial is written as a hands-on tutorial for MueLu, the next generation multigrid framework in Trilinos. It covers the whole spectrum from absolute beginners’ topics to expert level. Since the focus of this tutorial is on practical and technical aspects of multigrid methods in general and MueLu in particular, the reader is expected to have a basic understanding of multigrid methods and its general underlying concepts. Please refer to multigrid textbooks (e.g. [1]) for the theoretical background.

  4. Indico CONFERENCE tutorial

    CERN Document Server

    CERN. Geneva; Manzoni, Alex Marc

    2017-01-01

    This short tutorial explains how to create a CONFERENCE in indico and how to handle abstracts and registration forms, in detail: Timestamps: 1:01 - Programme  2:28 - Call for abstracts  11:50 - Abstract submission  13:41 - Abstract Review 15:41 - The Judge's Role 17:23 - Registration forms' creation 23:34 - Candidate participant's registration/application 25:54 - Customisation of Indico pages - Layout 28:08 - Customisation of Indico pages - Menus 29:47 - Configuring Event reminders and import into calendaring tools   See HERE a recent presentation by Pedro about the above steps in the life of an indico CONFERENCE event.

  5. Neural inhibition enables selection during language processing.

    Science.gov (United States)

    Snyder, Hannah R; Hutchison, Natalie; Nyhus, Erika; Curran, Tim; Banich, Marie T; O'Reilly, Randall C; Munakata, Yuko

    2010-09-21

    Whether grocery shopping or choosing words to express a thought, selecting between options can be challenging, especially for people with anxiety. We investigate the neural mechanisms supporting selection during language processing and its breakdown in anxiety. Our neural network simulations demonstrate a critical role for competitive, inhibitory dynamics supported by GABAergic interneurons. As predicted by our model, we find that anxiety (associated with reduced neural inhibition) impairs selection among options and associated prefrontal cortical activity, even in a simple, nonaffective verb-generation task, and the GABA agonist midazolam (which increases neural inhibition) improves selection, whereas retrieval from semantic memory is unaffected when selection demands are low. Neural inhibition is key to choosing our words.

  6. Augmenting cognitive learning of community nutrition by tutorials.

    Science.gov (United States)

    Chaturvedi, S

    1998-01-01

    Community health interventions are increasingly being considered a priority area in medical curriculum. In the topic of nutrition, a situation analysis of final MBBS students in our institution revealed significantly lower levels of knowledge in community applications as compared to basics and clinical aspects, indicating the need for some educational intervention. An improvised tutorial was conducted to address this deficiency at cognitive level. The intervention was a special scheme of flow of discussion with a positive bias in favour of nutritional applications at community level. Half of the learners were given routine tutorial, as part of existing teaching schedule in nutrition and the remaining were subjected to educational intervention, to provide control and study groups respectively. Before and after assessment of the recall of learners on community applications demonstrated a positive impact of improvised tutorial. The learners' level of knowledge in two groups was comparable before the tutorial but it was significantly higher ('P' < 0.001) in study group as compared to control, after the tutorial (mean scores: 134.38/150 and 91.20/150 respectively). No extra resources, tutor time or student's learning hours were needed for the improvised tutorial. Tutor's positive bias in favour of applied aspects can bring about a desired change even in conventional teaching-learning process, without asking for extra resources. It can be a supplement to community-based learning.

  7. How experienced tutors facilitate tutorial dynamics in PBL groups.

    Science.gov (United States)

    Lee, Gin-Hong; Lin, Chaou-Shune; Lin, Yu-Hua

    2013-01-01

    Problem-based learning (PBL) tutorial are conducted in small groups, and successful learning in such groups requires good group facilitating skills. There is a lack of research on actual skills employed by tutors in facilitating the group dynamics. To explore the process of PBL tutorial small groups, focusing on the tutors' actual behavior in facilitating group dynamics. Eight experienced tutors from various departments in medical colleges participated in this research. Forty tutorial group sessions were videotaped. Among the 636 tutorial intervention episodes, 142 of them were associated with facilitating group dynamics. Tutors interventions as well as their recalls were transcribed verbatim. Qualitative research methods were utilized to analyze the data. There were 10 tutorial group dynamic situations and 48 tutorial skills. Analysis of the tutors' intentions employing these skills in the 10 situations showed that tutors were trying to achieve the following aims: (1) iteration of PBL principles, (2) delegation of responsibility to the students, (3) creation of a good discussion forum, and (4) the generation of a good learning atmosphere. Results from this study provide PBL tutors with a practical frame of reference on group dynamic facilitating skills and stimulate further research on this topic.

  8. Ancestral process and diffusion model with selection

    CERN Document Server

    Mano, Shuhei

    2008-01-01

    The ancestral selection graph in population genetics introduced by Krone and Neuhauser (1997) is an analogue to the coalescent genealogy. The number of ancestral particles, backward in time, of a sample of genes is an ancestral process, which is a birth and death process with quadratic death and linear birth rate. In this paper an explicit form of the number of ancestral particle is obtained, by using the density of the allele frequency in the corresponding diffusion model obtained by Kimura (1955). It is shown that fixation is convergence of the ancestral process to the stationary measure. The time to fixation of an allele is studied in terms of the ancestral process.

  9. Implementation and Student Testing of a Web-Based, Student-Centered Stereochemistry Tutorial

    Science.gov (United States)

    Burrmann, Nicola J.; Moore, John W.

    2015-01-01

    The implementation of a web-based stereochemistry tutorial, which allows students to select their preferred structural representation and method for making stereochemical comparisons between molecules, is discussed. The tutorial was evaluated by students in three different introductory organic chemistry courses at a large midwestern university.…

  10. VINCE--An On-Line Tutorial Tool for Teaching Introductory Programming.

    Science.gov (United States)

    Rowe, Glenn; Thorburn, Gareth

    2000-01-01

    Describes a tutorial tool which allows the execution of a C program to be graphically displayed. VINCE (Visual Instruction for Novices in a C Environment) is written in Java, allowing it to be used on the Web. Students can enter their own C code, or select from a menu of pre-written tutorials, each illustrating a particular aspect of programming.…

  11. The Process of Marketing Segmentation Strategy Selection

    OpenAIRE

    Ionel Dumitru

    2007-01-01

    The process of marketing segmentation strategy selection represents the essence of strategical marketing. We present hereinafter the main forms of the marketing statategy segmentation: undifferentiated marketing, differentiated marketing, concentrated marketing and personalized marketing. In practice, the companies use a mix of these marketing segmentation methods in order to maximize the proffit and to satisfy the consumers’ needs.

  12. The Process of Marketing Segmentation Strategy Selection

    OpenAIRE

    Ionel Dumitru

    2007-01-01

    The process of marketing segmentation strategy selection represents the essence of strategical marketing. We present hereinafter the main forms of the marketing statategy segmentation: undifferentiated marketing, differentiated marketing, concentrated marketing and personalized marketing. In practice, the companies use a mix of these marketing segmentation methods in order to maximize the proffit and to satisfy the consumers’ needs.

  13. PXI Express specification tutorial

    Institute of Scientific and Technical Information of China (English)

    National Instruments

    2007-01-01

    @@ Introduction The PXI industry standard has quickly gained adoption and grown in prevalence in automated test systems since its release in 1998. PXI is being selected as the platform of choice for thousands of applications, from areas such as military and aerospace, consumer electronics, and communications, to process control and industrial automation. One of the key elements driving the rapid adoption of PXI is its use of PCI in the communication backplane. Now, as the commercial PC industry drastically improves the available bus bandwidth by evolving PCI to PCI Express, PXI has the ability to meet even more application needs by integrating PCI Express into the PXI standard.

  14. Accounting for tutorial teaching assistants’ buy-in to reform instruction

    Directory of Open Access Journals (Sweden)

    Renee Michelle Goertzen

    2009-12-01

    Full Text Available Successful implementation of tutorials includes establishing norms for learning in the tutorial classroom. The teaching assistants (TAs who lead each tutorial section are important arbiters of these norms. TAs who value (buy into tutorials are more likely to convey their respect for the material and the tutorial process to the students, as well as learning more themselves. We present a case study of a TA who does not buy into certain aspects of the tutorials he teaches and demonstrate how his lack of buy-in affects specific classroom interactions. We would hope to design professional development programs to help TAs appreciate the power of tutorial instruction. However, our research suggests that the typical professional development activities offered to tutorial TAs are not likely to be effective. Instead, it appears that what we call the “social and environmental context” of the tutorials—including classroom, departmental, and institutional levels of implementation—has the potential to strongly affect TA buy-in to tutorials and probably outweighs the influence of any particular activity that we might prepare for them.

  15. Selective effects of nicotine on attentional processes.

    Science.gov (United States)

    Mancuso, G; Warburton, D M; Mélen, M; Sherwood, N; Tirelli, E

    1999-09-01

    It is now well established from electrophysiological and behavioural evidence that nicotine has effects on information processing. The results are usually explained either by a primary effect of nicotine or by a reversal effect of a nicotine-induced, abstinence deficit. In addition, there is dispute about the cognitive processes underlying the changes in performance. This study has approached the first question by using the nicotine patch, in order to administer nicotine chronically. In addition, we examined the effects of nicotine on attention with a selection of tests which assessed the intensity and selectivity features of attention, using the Random Letter Generation test, the Flexibility of Attention test and the Stroop test. Nicotine enhanced the speed of number generation and the speed of processing in both the control and interference conditions of the Stroop test. There were no effects on attentional switching of the Flexibility of Attention test. The results are consistent with the hypothesis that nicotine mainly improves the intensity feature of attention, rather than the selectivity feature.

  16. The Facilitation of Problem-Based Learning in Medical Education Through a Computer-Mediated Tutorial Laboratory

    Science.gov (United States)

    Myers, A.; Barrows, H.S.; Koschmann, T.D.; Feltovich, P.J.

    1990-01-01

    This paper describes the means by which a computer-supported group interaction system known as the Computer-Mediated Tutorial Laboratory (CMTL) is used to support Problem-Based Learning Tutorials. The Problem-Based Learning Tutorial process has traditionally been solely a group process, sharing both the advantages and the disadvantages of any group process. This paper discusses the nature of Problem-Based Learning, the logistics of integrating computer mediation with the tutorial process and how computer mediation can be used to facilitate the eliciting and recording of individual input while enhancing the powerful effects of the group process.

  17. FIN 370new UOP Course Tutorial/TutorialRank

    OpenAIRE

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 24 Times, Rating: A+   1.Which of the following is true regarding Investment Banks? 2. We compute the profitability index of a capital-budgeting proposal by Initial outlay = $1,748.80 3. Project Sigma requires an investment of $1 million and has a NPV of $10. Project Delta requires an investment of $500,000 and has a NPV of $150,000. The projects involve unrelated new product lines. What ...

  18. Quantitative Microbial Risk Assessment Tutorial - Primer

    Science.gov (United States)

    This document provides a Quantitative Microbial Risk Assessment (QMRA) primer that organizes QMRA tutorials. The tutorials describe functionality of a QMRA infrastructure, guide the user through software use and assessment options, provide step-by-step instructions for implementi...

  19. Waste processing: new near infrared technologies for material identification and selection

    Science.gov (United States)

    Cesetti, M.; Nicolosi, P.

    2016-09-01

    The awareness of environmental issues on a global scale increases the opportunities for waste handling companies. Recovery is set to become all the more important in areas such as waste selection, minerals processing, electronic scrap, metal and plastic recycling, refuse and the food industry. Effective recycling relies on effective sorting. Sorting is a fundamental step of the waste disposal/recovery process. The big players in the sorting market are pushing for the development of new technologies to cope with literally any type of waste. The purpose of this tutorial is to gain an understanding of waste management, frameworks, strategies, and components that are current and emerging in the field. A particular focus is given to spectroscopic techniques that pertains the material selection process with a greater emphasis placed on the NIR technology for material identification. Three different studies that make use of NIR technology are shown, they are an example of some of the possible applications and the excellent results that can be achieved with this technique.

  20. Advocacy and IPR, tutorial 4

    CERN Document Server

    CERN. Geneva

    2005-01-01

    With open access and repositories assuming a high profile some may question whether advocacy is still necessary. Those involved in the business of setting up and populating repositories are aware that in the majority of institutions there is still a great need for advocacy. This tutorial will give participants an opportunity to discuss different advocacy methods and approaches, including the 'top down' and 'bottom up' approach, publicity methods and the opportunities offered by funding body positions on open access. Participants will have the opportunity to share experiences of what works and what doesn't. The advocacy role often encompasses responsibility for advising academics on IPR issues. This is a particularly critical area where repository staff are engaged in depositing content on behalf of academics. The tutorial will offer an opportunity to discuss the IPR issues encountered by those managing repositories. The tutorial will draw on the experience of participants who have been engaged in advocacy act...

  1. Innovations in Co-Ordinating Undergraduate Students' Oral Tutorial Presentations

    Science.gov (United States)

    Harman, Kristyn E.

    2010-01-01

    Individual oral tutorial presentations have been utilised in numerous undergraduate courses to develop and assess students' skills in organising and communicating ideas and information to a select audience. However, evidence from the literature, interviews with academics (n=5), and the author's own experiences have demonstrated that these…

  2. Neural networks and applications tutorial

    Science.gov (United States)

    Guyon, I.

    1991-09-01

    The importance of neural networks has grown dramatically during this decade. While only a few years ago they were primarily of academic interest, now dozens of companies and many universities are investigating the potential use of these systems and products are beginning to appear. The idea of building a machine whose architecture is inspired by that of the brain has roots which go far back in history. Nowadays, technological advances of computers and the availability of custom integrated circuits, permit simulations of hundreds or even thousands of neurons. In conjunction, the growing interest in learning machines, non-linear dynamics and parallel computation spurred renewed attention in artificial neural networks. Many tentative applications have been proposed, including decision systems (associative memories, classifiers, data compressors and optimizers), or parametric models for signal processing purposes (system identification, automatic control, noise canceling, etc.). While they do not always outperform standard methods, neural network approaches are already used in some real world applications for pattern recognition and signal processing tasks. The tutorial is divided into six lectures, that where presented at the Third Graduate Summer Course on Computational Physics (September 3-7, 1990) on Parallel Architectures and Applications, organized by the European Physical Society: (1) Introduction: machine learning and biological computation. (2) Adaptive artificial neurons (perceptron, ADALINE, sigmoid units, etc.): learning rules and implementations. (3) Neural network systems: architectures, learning algorithms. (4) Applications: pattern recognition, signal processing, etc. (5) Elements of learning theory: how to build networks which generalize. (6) A case study: a neural network for on-line recognition of handwritten alphanumeric characters.

  3. Tutorials in complex photonic media

    CERN Document Server

    Noginov, Mikhail A; McCall, Martin W; Zheludev, Nikolay I

    2010-01-01

    The field of complex photonic media encompasses many leading-edge areas in physics, chemistry, nanotechnology, materials science, and engineering. In Tutorials in Complex Photonic Media , leading experts have brought together 19 tutorials on breakthroughs in modern optics, such as negative refraction, chiral media, plasmonics, photonic crystals, and organic photonics. This text will help students, engineers, and scientists entering the field to become familiar with the interrelated aspects of the subject. It also serves well as a supplemental text in introductory and advanced courses on optica

  4. Mail2Print online tutorial

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Mail2print is a feature which allows you to send documents to a printer by mail. This tutorial (text attached to the event page) explains how to use this service. Content owner: Vincent Nicolas Bippus Presenter: Pedro Augusto de Freitas Batista Tell us what you think via e-learning.support at cern.ch More tutorials in the e-learning collection of the CERN Document Server (CDS) https://cds.cern.ch/collection/E-learning%20modules?ln=en All info about the CERN rapid e-learning project is linked from http://twiki.cern.ch/ELearning  

  5. Processing, testing and selecting blood components.

    Science.gov (United States)

    Jones, Alister; Heyes, Jennifer

    Transfusion of blood components can be an essential and lifesaving treatment for many patients. However, components must comply with a number of national requirements to ensure they are safe and fit for use. Transfusion of incorrect blood components can lead to mortality and morbidity in patients, which is why patient testing and blood selection are important. This second article in our five-part series on blood transfusion outlines the requirements for different blood components, the importance of the ABO and RhD blood group systems and the processes that ensure the correct blood component is issued to each patient.

  6. Selected papers on noise and stochastic processes

    CERN Document Server

    Wax, Nelson

    1954-01-01

    Six classic papers on stochastic process, selected to meet the needs of physicists, applied mathematicians, and engineers. Contents: 1.Chandrasekhar, S.: Stochastic Problems in Physics and Astronomy. 2. Uhlenbeck, G. E. and Ornstein, L. S.: On the Theory of the Browninan Motion. 3. Ming Chen Wang and Uhlenbeck, G. E.: On the Theory of the Browninan Motion II. 4. Rice, S. O.: Mathematical Analysis of Random Noise. 5. Kac, Mark: Random Walk and the Theory of Brownian Motion. 6. Doob, J. L.: The Brownian Movement and Stochastic Equations. Unabridged republication of the Dover reprint (1954). Pre

  7. Model selection for Poisson processes with covariates

    CERN Document Server

    Sart, Mathieu

    2011-01-01

    We observe $n$ inhomogeneous Poisson processes with covariates and aim at estimating their intensities. To handle this problem, we assume that the intensity of each Poisson process is of the form $s (\\cdot, x)$ where $x$ is the covariate and where $s$ is an unknown function. We propose a model selection approach where the models are used to approximate the multivariate function $s$. We show that our estimator satisfies an oracle-type inequality under very weak assumptions both on the intensities and the models. By using an Hellinger-type loss, we establish non-asymptotic risk bounds and specify them under various kind of assumptions on the target function $s$ such as being smooth or composite. Besides, we show that our estimation procedure is robust with respect to these assumptions.

  8. MGT 401 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    kennith

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MGT 401 Week 1 Individual Assignment Strategic Management Process Paper (Ash) MGT 401 Week 1 Class Activity Week 1 (Ash) MGT 401 Week 1 DQ 1 (Ash) MGT 401 Week 1 DQ 2 (Ash) MGT 401 Week 2 Learning Team Business Model Comparison Example (Ash) MGT 401 Week 2 DQ 1 (Ash) MGT 401 Week 2 DQ 2 (Ash) MGT 401 Week 2 Class Activity (Ash) MGT 401 Week 3 Individual Assignment Business Plan Evaluation (Ash) ...

  9. CJA 444 Tutorials / cja444dotcom

    OpenAIRE

    sunshine384

    2015-01-01

    For more course tutorials visit www.cja444.com   CJA 444 Week 1 DQ 1 CJA 444 Week 1 DQ 2 CJA 444 Week 1 Individual Assignment Organizational Behavior Paper CJA 444 Week 1 Team Assignment Weekly Summary CJA 444 Week 2 DQ 1 CJA 444 Week 2 DQ 2 CJA 444 week 2 Individual Assignment Group Behavior and Processes Paper CJA 444 Week 2 Team Assignment Team Diversity Paper CJA 444 Week 2 Learning Team Weekly Summary CJA 444 Week 3 DQ 1 CJA 444 We...

  10. CJS 220 Tutorials / cjs220dotcom

    OpenAIRE

    sunshine38

    2015-01-01

    For more course tutorials visit www.cjs220.com   CJS 220 Week 1 DQ 1 and DQ 2 CJS 220 Week 2 Checkpoint Structure of the Courts CJS 220 Week 2 Individual Law Opinion Paper CJS 220 Week 3 Checkpoint Due Process CJS 220 Week 3 Checkpoint Legal Defenses CJS 220 Week 3 DQ 1 and DQ 2 CJS 220 Week 4 Checkpoint Attorney Client Confidentiality   CJS 220 Week 4 Individual Assignment Prosecution Versus Defense Paper CJS 220 Week 5 Checkpoint Path to...

  11. 3-D analysis of grain selection process

    Science.gov (United States)

    Arao, Tomoka; Esaka, Hisao; Shinozuka, Kei

    2012-07-01

    It is known that the grain selection plays an important role in the manufacturing process for turbine blades. There are some analytical or numerical models to treat the grain selection. However, the detailed mechanism of grain selection in 3-D is still uncertain. Therefore, an experimental research work using Al-Cu alloy has been carried out in order to understand the grain selection in 3-D.A mold made by Al2O3 was heated to 600 °C ( = liquids temperature of the alloy) and was set on a water-colded copper chill plate. Molten Al-20 wt%Cu alloy was cast into the mold and unidirectional solidified ingot was prepared. The size of ingot was approximately phi25×65H mm. To obtain the thermal history, 4 thermocouples were placed in the mold. It is confirmed that the alloy solidified unidirectionally from bottom to top. Solidified structure on a longitudinal cross section was observed and unidirectional solidification up to 40 mm was ensured. EBSD analysis has been performed on horizontal cross section at an interval of ca.200 μm. These observations were carried out 7-5 mm from the bottom surface. Crystallographic orientation of primary Al phase and size of solidified grains were characterized. A large solidified grain, the crystallographic orientation of which is approximately along heat flow direction, is observed near the lowest cross section. The area of grain decreased as solidification proceeded. On the other hand, it is found that the area of grain increased.

  12. Online Searching in PBL Tutorials

    Science.gov (United States)

    Jin, Jun; Bridges, Susan M.; Botelho, Michael G.; Chan, Lap Ki

    2015-01-01

    This study aims to explore how online searching plays a role during PBL tutorials in two undergraduate health sciences curricula, Medicine and Dentistry. Utilizing Interactional Ethnography (IE) as an organizing framework for data collection and analysis, and drawing on a critical theory of technology as an explanatory lens, enabled a textured…

  13. Web-tutorials in context

    DEFF Research Database (Denmark)

    Lund, Haakon; Pors, Niels Ole

    2012-01-01

    Purpose – The purpose of the research is to investigate Norwegian web‐tutorials in contexts consisting of organizational issues and different forms of usability in relation to students’ perception and use of the system. Further, the research investigates the usefulness of the concepts concerning...

  14. Tutorial Instruction in Science Education

    Directory of Open Access Journals (Sweden)

    Rhea Miles

    2015-06-01

    Full Text Available The purpose of the study is to examine the tutorial practices of in-service teachers to address the underachievement in the science education of K-12 students. Method: In-service teachers in Virginia and North Carolina were given a survey questionnaire to examine how they tutored students who were in need of additional instruction. Results: When these teachers were asked, “How do you describe a typical one-on-one science tutorial session?” the majority of their responses were categorized as teacher-directed. Many of the teachers would provide a science tutorial session for a student after school for 16-30 minutes, one to three times a week. Respondents also indicated they would rely on technology, peer tutoring, scientific inquiry, or themselves for one-on-one science instruction. Over half of the in-service teachers that responded to the questionnaire stated that they would never rely on outside assistance, such as a family member or an after school program to provide tutorial services in science. Additionally, very few reported that they incorporated the ethnicity, culture, or the native language of ELL students into their science tutoring sessions.

  15. Online Searching in PBL Tutorials

    Science.gov (United States)

    Jin, Jun; Bridges, Susan M.; Botelho, Michael G.; Chan, Lap Ki

    2015-01-01

    This study aims to explore how online searching plays a role during PBL tutorials in two undergraduate health sciences curricula, Medicine and Dentistry. Utilizing Interactional Ethnography (IE) as an organizing framework for data collection and analysis, and drawing on a critical theory of technology as an explanatory lens, enabled a textured…

  16. Hypermedia 1990 structured Hypertext tutorial

    Science.gov (United States)

    Johnson, J. Scott

    1990-01-01

    Hypermedia 1990 structured Hypertext tutorial is presented in the form of view-graphs. The following subject areas are covered: structured hypertext; analyzing hypertext documents for structure; designing structured hypertext documents; creating structured hypertext applications; structuring service and repair documents; maintaining structured hypertext documents; and structured hypertext conclusion.

  17. Selective detachment process in column flotation froth

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Ozsever, A.V.; Parekh, B.K. [University of Kentucky, Lexington, KY (United States). Dept. of Mining Engineering

    2006-05-15

    The selectivity in flotation columns involving the separation of particles of varying degrees of floatability is based on differential flotation rates in the collection zone, reflux action between the froth and collection zones, and differential detachment rates in the froth zone. Using well-known theoretical models describing the separation process and experimental data, froth zone and overall flotation recovery values were quantified for particles in an anthracite coal that have a wide range of floatability potential. For highly floatable particles, froth recovery had a very minimal impact on overall recovery while the recovery of weakly floatable material was decreased substantially by reductions in froth recovery values. In addition, under carrying-capacity limiting conditions, selectivity was enhanced by the preferential detachment of the weakly floatable material. Based on this concept, highly floatable material was added directly into the froth zone when treating the anthracite coal. The enriched froth phase reduced the product ash content of the anthracite product by five absolute percentage points while maintaining a constant recovery value.

  18. weighting of items in a tutorial performance evaluation

    African Journals Online (AJOL)

    2009-05-21

    May 21, 2009 ... learning performance, including their performance in tutorial groups. ... small group interaction, reasoning and autonomy (Niemenin, Saure ... role is to foster cooperation, stimulate thinking, promote enquiry and ... These processes require the individual learner to possess or, in the longer term, to develop a ...

  19. Processing metallic glasses by selective laser melting

    Directory of Open Access Journals (Sweden)

    Simon Pauly

    2013-01-01

    Full Text Available Metallic glasses and their descendants, the so-called bulk metallic glasses (BMGs, can be regarded as frozen liquids with a high resistance to crystallization. The lack of a conventional structure turns them into a material exhibiting near-theoretical strength, low Young's modulus and large elasticity. These unique mechanical properties can be only obtained when the metallic melts are rapidly cooled to bypass the nucleation and growth of crystals. Most of the commonly known and used processing routes, such as casting, melt spinning or gas atomization, have intrinsic limitations regarding the complexity and dimensions of the geometries. Here, it is shown that selective laser melting (SLM, which is usually used to process conventional metallic alloys and polymers, can be applied to implement complex geometries and components from an Fe-base metallic glass. This approach is in principle viable for a large variety of metallic alloys and paves the way for the novel synthesis of materials and the development of parts with advanced functional and structural properties without limitations in size and intricacy.

  20. Selective visual attention in object detection processes

    Science.gov (United States)

    Paletta, Lucas; Goyal, Anurag; Greindl, Christian

    2003-03-01

    Object detection is an enabling technology that plays a key role in many application areas, such as content based media retrieval. Attentive cognitive vision systems are here proposed where the focus of attention is directed towards the most relevant target. The most promising information is interpreted in a sequential process that dynamically makes use of knowledge and that enables spatial reasoning on the local object information. The presented work proposes an innovative application of attention mechanisms for object detection which is most general in its understanding of information and action selection. The attentive detection system uses a cascade of increasingly complex classifiers for the stepwise identification of regions of interest (ROIs) and recursively refined object hypotheses. While the most coarse classifiers are used to determine first approximations on a region of interest in the input image, more complex classifiers are used for more refined ROIs to give more confident estimates. Objects are modelled by local appearance based representations and in terms of posterior distributions of the object samples in eigenspace. The discrimination function to discern between objects is modeled by a radial basis functions (RBF) network that has been compared with alternative networks and been proved consistent and superior to other artifical neural networks for appearance based object recognition. The experiments were led for the automatic detection of brand objects in Formula One broadcasts within the European Commission's cognitive vision project DETECT.

  1. ROOT Tutorial for Summer Students

    CERN Document Server

    CERN. Geneva; Piparo, Danilo

    2015-01-01

    ROOT is a "batteries-included" tool kit for data analysis, storage and visualization. It is widely used in High Energy Physics and other disciplines such as Biology, Finance and Astrophysics. This event is an introductory tutorial to ROOT and comprises a front lecture and hands on exercises. IMPORTANT NOTE: The tutorial is based on ROOT 6.04 and NOT on the ROOT5 series.  IMPORTANT NOTE: if you have ROOT 6.04 installed on your laptop, you will not need to install any virtual machine. The instructions showing how to install the virtual machine on which you can find ROOT 6.04 can be found under "Material" on this page.

  2. Interactive Web-based tutorials for teaching digital electronics

    Science.gov (United States)

    Bailey, Donald G.

    2000-10-01

    With a wide range of student abilities in a class, it is difficult to effectively teach and stimulate all students. A series of web based tutorials was designed to help weaker students and stretch the stronger students. The tutorials consist of a series of HTML web pages with embedded Java applets. This combination is particularly powerful for providing interactive demonstrations because any textual content may be easily provided within the web page. The applet is able to be a compete working program that dynamically illustrates the concept, or provides a working environment for the student to experiment and work through their solution. The applet is dynamic, and responds to the student through both mouse clicks and keyboard entry. These allow the student to adjust parameters, make selections, and affect the way the program is run or information is displayed. Such interaction allows each applet to provide a mini demonstration or experiment to help the student understand a particular concept or technique. The approach taken is illustrated with a tutorial that dynamically shows the relationships between a truth table, Karnaugh amp, logic circuit and Boolean algebra representations of a logic function, and dramatically illustrates the effect of minimization on the resultant circuit. Use of the tutorial has resulted in significant benefits, particularly with weaker students.

  3. Tutorial on Online Partial Evaluation

    Directory of Open Access Journals (Sweden)

    William R. Cook

    2011-09-01

    Full Text Available This paper is a short tutorial introduction to online partial evaluation. We show how to write a simple online partial evaluator for a simple, pure, first-order, functional programming language. In particular, we show that the partial evaluator can be derived as a variation on a compositionally defined interpreter. We demonstrate the use of the resulting partial evaluator for program optimization in the context of model-driven development.

  4. Creating R Packages: A Tutorial

    OpenAIRE

    Leisch, Friedrich

    2008-01-01

    This tutorial gives a practical introduction to creating R packages. We discuss how object oriented programming and S formulas can be used to give R code the usual look and feel, how to start a package from a collection of R functions, and how to test the code once the package has been created. As running example we use functions for standard linear regression analysis which are developed from scratch.

  5. Tutorial on Online Partial Evaluation

    CERN Document Server

    Cook, William R; 10.4204/EPTCS.66.8

    2011-01-01

    This paper is a short tutorial introduction to online partial evaluation. We show how to write a simple online partial evaluator for a simple, pure, first-order, functional programming language. In particular, we show that the partial evaluator can be derived as a variation on a compositionally defined interpreter. We demonstrate the use of the resulting partial evaluator for program optimization in the context of model-driven development.

  6. A Tutorial on Variational Integrators

    CERN Document Server

    Webb, Stephen D

    2014-01-01

    We present a brief tutorial on the nuts and bolts computation of a multisymplectic particle-in-cell algorithm using the discretized Lagrangian approach. This approach, originated by Marsden, Shadwick, and others, brings the benefits of symplectic integration of Hamiltonian systems to full electromagnetic particle-in-cell algorithms. To make the work more approachable, we present a basic discussion of the philosophy, combined with a detailed derivation of a standard 1-dimensional electrostatic particle-in-cell algorithm.

  7. ECO 204 NEW Tutorial / Uoptutorial

    OpenAIRE

    Armugam

    2015-01-01

    For more course tutorials visit www.uoptutorial.com   Circular Flow Diagram. Explain how the circular flow diagram relates to the current economic situation. Using the circular flow diagram, explain a way that your family interacts in the factor market and a way that it interacts in the products market. Supply and Demand. Analyze how the law of demand applies to a recent purchase that you made. Describe how the product has changed in price and explain whether the price ch...

  8. Teaching Game Programming using Video Tutorials

    DEFF Research Database (Denmark)

    Majgaard, Gunver

    Background. What are the learning potentials of using online video tutorials as educational tools in game programming of Mixed Reality? The paper reports on the first experiences of teaching third semester engineering students design of Mixed Reality using online step-by-step programming video...... tutorials. Mixed Reality covers in this case both Augmented and Virtual Reality. Until recently, most of the instructional support for the software and game development came from paper tutorials (van der Meij et al, 2016:332). YouTube’s rapid growth in popularity and easy to use programs for video...... and emerging topics such as Mixed Reality. Students tend to use video tutorial on their own initiative as supplementary tutorials for new and hard topics. This motivated me to use existing video tutorials as teaching materials in the course titled Mixed Reality for third semester engineering students...

  9. Process for selecting engineering tools : applied to selecting a SysML tool.

    Energy Technology Data Exchange (ETDEWEB)

    De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  10. Process for selecting engineering tools : applied to selecting a SysML tool.

    Energy Technology Data Exchange (ETDEWEB)

    De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  11. Solar Tutorial and Annotation Resource (STAR)

    Science.gov (United States)

    Showalter, C.; Rex, R.; Hurlburt, N. E.; Zita, E. J.

    2009-12-01

    We have written a software suite designed to facilitate solar data analysis by scientists, students, and the public, anticipating enormous datasets from future instruments. Our “STAR" suite includes an interactive learning section explaining 15 classes of solar events. Users learn software tools that exploit humans’ superior ability (over computers) to identify many events. Annotation tools include time slice generation to quantify loop oscillations, the interpolation of event shapes using natural cubic splines (for loops, sigmoids, and filaments) and closed cubic splines (for coronal holes). Learning these tools in an environment where examples are provided prepares new users to comfortably utilize annotation software with new data. Upon completion of our tutorial, users are presented with media of various solar events and asked to identify and annotate the images, to test their mastery of the system. Goals of the project include public input into the data analysis of very large datasets from future solar satellites, and increased public interest and knowledge about the Sun. In 2010, the Solar Dynamics Observatory (SDO) will be launched into orbit. SDO’s advancements in solar telescope technology will generate a terabyte per day of high-quality data, requiring innovation in data management. While major projects develop automated feature recognition software, so that computers can complete much of the initial event tagging and analysis, still, that software cannot annotate features such as sigmoids, coronal magnetic loops, coronal dimming, etc., due to large amounts of data concentrated in relatively small areas. Previously, solar physicists manually annotated these features, but with the imminent influx of data it is unrealistic to expect specialized researchers to examine every image that computers cannot fully process. A new approach is needed to efficiently process these data. Providing analysis tools and data access to students and the public have proven

  12. La Acción Tutorial

    OpenAIRE

    Campillo Frutos, Sebastián; Sánchez López, María Cristina; Gomariz Vicente, María Ángeles; Martínez Juárez, Miriam

    2009-01-01

    Contenidos: La Acción tutorial. El tutor. El Plan de Acción Tutorial. Técnicas para el desarrollo de la Acción Tutorial. Materia que se imparte en el Master Universitario en Formación del Profesorado de Educación Secundaria Obligatoria y Bachillerato, Formación Profesional, Enseñanzas de Idiomas y Enseñanzas Artísticas

  13. Thin film processes

    CERN Document Server

    Vossen, John L

    1978-01-01

    Remarkable advances have been made in recent years in the science and technology of thin film processes for deposition and etching. It is the purpose of this book to bring together tutorial reviews of selected filmdeposition and etching processes from a process viewpoint. Emphasis is placed on the practical use of the processes to provide working guidelines for their implementation, a guide to the literature, and an overview of each process.

  14. Selection of Technical Routes for Resid Processing

    Institute of Scientific and Technical Information of China (English)

    Hu Weiqing

    2006-01-01

    With the increasing trend of heavy crudes supply with deteriorated quality and demand for clean fuels, deep processing of residuum, in particular the processing of low-grade resid, has become the main source for enhancing economic benefits of oil refiners. This article has discussed the technology for processing of different resids and the advantages and disadvantages of the combination processes for resid processing, while pinpointing the directions for development and application of technologies for resid processing in China.

  15. Theory of Selection Operators on Hyperspaces and Multivalued Stochastic Processes

    Institute of Scientific and Technical Information of China (English)

    高勇; 张文修

    1994-01-01

    In this paper, a new concept of selection operators on hyperspaces (subsets spaces) is introduced, and the existence theorems for several kinds of selection operators are proved. Using the methods of selection operators, we give a selection characterization of identically distributed multivalued random variables and completely solve the vector-valued selection problem for sequences of multivalued random variables converging in distribution. The regular selections and Markov selections for multivalued stochastic processes are studied, and a discretization theorem for multivalued Markov processes is established. A theorem on the asymptotic martingale selections for compact and convex multivalued asymptotic martingale is proved.

  16. PBL curriculum improves medical students' participation in small-group tutorials.

    Science.gov (United States)

    Wun, Y T; Tse, Eileen Y Y; Lam, T P; Lam, Cindy L K

    2007-09-01

    Group learning is the core of problem-based learning (PBL) but has not been extensively studied, especially in Asian students. This study compared students of PBL and non-PBL curricula in students' talking time and participation in small-group tutorials in a medical school in Asia. The proportions of student talking of 46 tutorials in three teaching rotations of the PBL curriculum and those of 43 corresponding tutorials in the non-PBL curriculum were counted. Twelve videotapes of tutorials (six from each curriculum), stratified for tutor, case scenario and students' learning stage, were randomly selected and transcribed. They were rated with the group-interaction (5 items) and active-participation (four items) tutorial assessment scales developed by Valle et al. These outcomes were compared between the students of PBL and non-PBL curricula. Students from the PBL curriculum talked significantly more. In only two (4.7%) of 43 tutorials in the non-PBL curriculum did the students talk more than the tutors; but students talked more than the tutors in 17 (37.0%) of 46 tutorials in the PBL curriculum. PBL students scored significantly higher than non-PBL students in all items except one item (respect to peers) of the tutorial assessment scales, and in the mean scores of both the group interaction scale (items 1-5) and the active participation scale (items 6-9). The results suggested that PBL starting from the early years of a medical curriculum was associated with more active student participation, interaction and collaboration in small-group tutorials.

  17. Research Methods Tutorial

    Science.gov (United States)

    Aguilera, Frank J.

    2015-01-01

    A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and quantitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

  18. Research Methods Tutorial

    Science.gov (United States)

    Aguilera, Frank J.

    2015-01-01

    A guiding principle for conducting research in technology, science, and engineering, leading to innovation is based on our use of research methodology (both qualitative and qualitative). A brief review of research methodology will be presented with an overview of NASA process in developing aeronautics technologies and other things to consider in research including what is innovation.

  19. A 'learning-by-doing' treatment planning tutorial for medical physicists.

    Science.gov (United States)

    Meyer, J; Hartmann, B; Kalet, I

    2009-06-01

    A framework for a tutorial for treatment planning in radiation oncology physics was developed, based on the University of Washington treatment planning system Prism. The tutorial is aimed at students in Medical Physics to accompany the lectures on treatment planning to enhance their theoretical knowledge. A web-based layout was chosen to allow independent work of the students. The tutorial guides the students through three different learning modules, designed mainly to enhance their understanding of the processes involved in treatment planning but also to learn the specific features of a modern treatment planning system. Each of the modules contains four units, with the aim to introduce the relevant Prism features, practice skills in different tasks and finally check the learning outcomes with a challenge and a self-scoring quiz. A survey for students' feedback completes the tutorial. Various tools and learning methods help to create an interactive, appealing learning environment, in which the emphasis is shifted from teacher-centred to student-centred learning paradigms. In summary, Prism lends itself well for educational purposes. The tutorial covers all main aspects of treatment planning. In its current form the tutorial is self-contained but still adjustable and expandable. The tutorial can be made available upon request to the authors.

  20. Tutorials in mathematical biosciences

    CERN Document Server

    2008-01-01

    The book offers an easy introduction to fast growing research areas in evolution of species, population genetics, ecological models, and population dynamics. The first two chapters review the concept and methodologies of phylogenetic trees; computational schemes and illustrations are given, including applications such as tracing the origin of SARS and influenza. The third chapter introduces the reader to ecological models, including predator-prey models. This chapter includes and introduction to reaction-diffusion equations, which are used to analyze the ecological models. The next chapter reviews a broad range of ongoing research in population dynamics, including evolution of dispersal models; it also features interesting mathematical theorems and lists open problems. The final chapter deals with gene frequencies under the action of migration and selection. The book is addressed to readers at the level of grad students and researchers. A background in PDEs is provided.

  1. From continuous flow analysis to programmable Flow Injection techniques. A history and tutorial of emerging methodologies.

    Science.gov (United States)

    Ruzicka, Jaromir Jarda

    2016-09-01

    Automation of reagent based assays, also known as Flow Analysis, is based on sample processing, in which a sample flows towards and through a detector for monitoring of its components. The Achilles heel of this methodology is that the majority of FA techniques use constant continuous forward flow to transport the sample - an approach which continually consumes reagents and generates chemical waste. Therefore the purpose of this report is to highlight recent developments of flow programming that not only save reagents, but also lead by means of advanced sample processing to selective and sensitive assays based on stop flow measurement. Flow programming combined with a novel approach to data harvesting yields a novel approach to single standard calibration, and avoids interference caused by refractive index. Finally, flow programming is useful for sample preparation, such as rapid, extensive sample dilution. The principles are illustrated by selected references to an available online tutorial http://www.flowinjectiontutorial,com/.

  2. 7 CFR 1469.6 - Enrollment criteria and selection process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Enrollment criteria and selection process. 1469.6... General Provisions § 1469.6 Enrollment criteria and selection process. (a) Selection and funding of... land to degradation; (iv) State or national conservation and environmental issues e.g., location of...

  3. Creativity: Intuitive processing outperforms deliberative processing in creative idea selection

    NARCIS (Netherlands)

    Zhu, Y.; Ritter, S.M.; Müller, B.C.N.; Dijksterhuis, A.J.

    2017-01-01

    Creative ideas are highly valued, and various techniques have been designed to maximize the generation of creative ideas. However, for actual implementation of creative ideas, the most creative ideas must be recognized and selected from a pool of ideas. Although idea generation and idea selection ar

  4. Creativity: Intuitive processing outperforms deliberative processing in creative idea selection

    NARCIS (Netherlands)

    Zhu, Y.; Ritter, S.M.; Müller, B.C.N.; Dijksterhuis, A.J.

    2017-01-01

    Creative ideas are highly valued, and various techniques have been designed to maximize the generation of creative ideas. However, for actual implementation of creative ideas, the most creative ideas must be recognized and selected from a pool of ideas. Although idea generation and idea selection

  5. GEN 480 UOP TUTORIAL / Uoptutorial

    OpenAIRE

    2015-01-01

    For more course tutorials visit www.uoptutorial.com           GEN 480 Week 1 DQ 1  GEN 480 Week 1 DQ 2  GEN 480 Week 1 DQ 3  GEN 480 Week 1 DQ 4  GEN 480 Week 1 Individual AssignmentEthics Awareness  GEN 480 Week 1 Summary  GEN 480 Week 2 DQ 1  GEN 480 Week 2 DQ 2  GEN 480 Week 2 DQ 3  GEN 480 Week 2 DQ 4  GEN 480 Week 2 Individual Assignment Ethics Awareness &...

  6. Agregar recursos en Studium. Tutorial

    OpenAIRE

    Universidad de Salamanca (España). Universidad Virtual

    2009-01-01

    A través de este tutorial se pretende dar a conocer las opciones que presenta Studium para agregar diversos tipos de recursos. Se explica de forma textual y gráfica cómo añadir y editar una etiqueta, una página de texto, una página web, enlazar diversos tipos de documentos, como un archivo o una web. Por otra parte, se presenta cómo gestionar el uso de carpetas.

  7. Web-tutorials in context

    DEFF Research Database (Denmark)

    Lund, Haakon; Pors, Niels Ole

    2012-01-01

    affordances and different forms of usability. Design/methodology/approach – The research has employed a variety of data‐collection methods including interviews with librarians, interviews and focus group interviews with students, coupled with tests of their capabilities using the systems. A detailed research...... of students were also interesting, clearly indicating marked differences in perceptions depending on study year and discipline but also different valuation of the different forms of usability. Overall, the research indicated a discrepancy between design intentions versus use and perception of the tutorials...

  8. ACC 230 UOP TUTORIAL / Uoptutorial

    OpenAIRE

    Justin Bieber

    2015-01-01

    For more course tutorials visit www.uoptutorial.com   ACC 230 Week 1 Checkpoint Financial Statements ACC 230 Week 1 DQ 1 and DQ 2 ACC 230 Week 2 CheckPoint Differentiating Depreciation Methods ACC 230 Week 2 Assignment Lucent Technologies Case ACC 230 Week 3 CheckPoint Preparing an Income Statement ACC 230 Week 3 DQ 1 and DQ 2 ACC 230 Week 4 CheckPoint Analyzing an Income Statement ACC 230 Week 4 Assignment Web Sites Search ACC 230 Week 5 Chec...

  9. Using VMD: an introductory tutorial.

    Science.gov (United States)

    Hsin, Jen; Arkhipov, Anton; Yin, Ying; Stone, John E; Schulten, Klaus

    2008-12-01

    VMD (Visual Molecular Dynamics) is a molecular visualization and analysis program designed for biological systems such as proteins, nucleic acids, lipid bilayer assemblies, etc. This unit will serve as an introductory VMD tutorial. We will present several step-by-step examples of some of VMD's most popular features, including visualizing molecules in three dimensions with different drawing and coloring methods, rendering publication-quality figures, animating and analyzing the trajectory of a molecular dynamics simulation, scripting in the text-based Tcl/Tk interface, and analyzing both sequence and structure data for proteins.

  10. Using VMD - An Introductory Tutorial

    Science.gov (United States)

    Hsin, Jen; Arkhipov, Anton; Yin, Ying; Stone, John E.; Schulten, Klaus

    2010-01-01

    VMD (Visual Molecular Dynamics) is a molecular visualization and analysis program designed for biological systems such as proteins, nucleic acids, lipid bilayer assemblies, etc. This unit will serve as an introductory VMD tutorial. We will present several step-by-step examples of some of VMD’s most popular features, including visualizing molecules in three dimensions with different drawing and coloring methods, rendering publication-quality figures, animate and analyze the trajectory of a molecular dynamics simulation, scripting in the text-based Tcl/Tk interface, and analyzing both sequence and structure data for proteins. PMID:19085979

  11. GEOS. User Tutorials

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Pengchen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Settgast, Randolph R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Johnson, Scott M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walsh, Stuart D.C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morris, Joseph P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ryerson, Frederick J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-12-17

    GEOS is a massively parallel, multi-physics simulation application utilizing high performance computing (HPC) to address subsurface reservoir stimulation activities with the goal of optimizing current operations and evaluating innovative stimulation methods. GEOS enables coupling of di erent solvers associated with the various physical processes occurring during reservoir stimulation in unique and sophisticated ways, adapted to various geologic settings, materials and stimulation methods. Developed at the Lawrence Livermore National Laboratory (LLNL) as a part of a Laboratory-Directed Research and Development (LDRD) Strategic Initiative (SI) project, GEOS represents the culmination of a multi-year ongoing code development and improvement e ort that has leveraged existing code capabilities and sta expertise to design new computational geosciences software.

  12. Automated problem generation in Learning Management Systems: a tutorial

    Directory of Open Access Journals (Sweden)

    Jaime Romero

    2016-07-01

    Full Text Available The benefits of solving problems have been widely acknowledged by literature. Its implementation in e–learning platforms can make easier its management and the learning process itself. However, its implementation can also become a very time–consuming task, particularly when the number of problems to generate is high. In this tutorial we describe a methodology that we have developed aiming to alleviate the workload of producing a great deal of problems in Moodle for an undergraduate business course. This methodology follows a six-step process and allows evaluating student’s skills in problem solving, minimizes plagiarism behaviors and provides immediate feedback. We expect this tutorial encourage other educators to apply our six steps process, thus benefiting themselves and their students of its advantages.

  13. Artificial Immune Systems Tutorial

    CERN Document Server

    Aickelin, Uwe

    2008-01-01

    The biological immune system is a robust, complex, adaptive system that defends the body from foreign pathogens. It is able to categorize all cells (or molecules) within the body as self-cells or non-self cells. It does this with the help of a distributed task force that has the intelligence to take action from a local and also a global perspective using its network of chemical messengers for communication. There are two major branches of the immune system. The innate immune system is an unchanging mechanism that detects and destroys certain invading organisms, whilst the adaptive immune system responds to previously unknown foreign cells and builds a response to them that can remain in the body over a long period of time. This remarkable information processing biological system has caught the attention of computer science in recent years. A novel computational intelligence technique, inspired by immunology, has emerged, called Artificial Immune Systems. Several concepts from the immune have been extracted an...

  14. Subcontractor Selection Using Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Vesile Sinem Arikan Kargi

    2012-07-01

    Full Text Available Turkish textile firms work under a heavily competitive atmosphere in terms of prices due to globalization. Firms have to take into consideration several criteria like cost, quality and delivery-on-time in order to survive the global market conditions and to maintain profitability. To meet these criteria, contractor companies have to select the best subcontractor. Therefore, the selection of subcontractor for the contractor company is a problem. The aim of this study is to solve the problem of Yeşim Textile, a contractor company, about the selection of the best subcontractor for its customer Nike. To solve the problem, firstly, the main criteria and relevant sub-criteria, which are of importance for Yeşim and Nike, were defined. Then, authorities from the firms were interviewed in order to formulate pairwise comparison matrices using the Saaty’s importance scale. In a sense, this matrix is the model of this study. The model, named AHP, was analyzed using the Expert Choice software. Best subcontractors for Yeşim were determined based on the model results. In addition, these results were analyzed for the firm’s decision makers.

  15. SHARP Multiphysics Tutorials

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-02-29

    SHARP, developed under the NEAMS Reactor Product Line, is an advanced modeling and simulation toolkit for the analysis of advanced nuclear reactors. SHARP is comprised of three physics modules currently including neutronics, thermal hydraulics, and structural mechanics. SHARP empowers designers to produce accurate results for modeling physical phenomena that have been identified as important for nuclear reactor analysis. SHARP can use existing physics codes and take advantage of existing infrastructure capabilities in the MOAB framework and the coupling driver/solver library, the Coupled Physics Environment (CouPE), which utilizes the widely used, scalable PETSc library. This report aims at identifying the coupled-physics simulation capability of SHARP by introducing the demonstration example called sahex in advance of the SHARP release expected by Mar 2016. sahex consists of 6 fuel pins with cladding, 1 control rod, sodium coolant and an outer duct wall that encloses all the other components. This example is carefully chosen to demonstrate the proof of concept for solving more complex demonstration examples such as EBR II assembly and ABTR full core. The workflow of preparing the input files, running the case and analyzing the results is demonstrated in this report. Moreover, an extension of the sahex model called sahex_core, which adds six homogenized neighboring assemblies to the full heterogeneous sahex model, is presented to test homogenization capabilities in both Nek5000 and PROTEUS. Some primary information on the configuration and build aspects for the SHARP toolkit, which includes capability to auto-download dependencies and configure/install with optimal flags in an architecture-aware fashion, is also covered by this report. A step-by-step instruction is provided to help users to create their cases. Details on these processes will be provided in the SHARP user manual that will accompany the first release.

  16. Folklore and the College Selection Process Revisited

    Science.gov (United States)

    Caruso, Pete

    2012-01-01

    This paper is a response to Clinton F. Conrad's article, "Beyond the Folklore." Conrad's strategy for assessing undergraduate quality echoes the sentiments espoused by many admission and college counseling professionals over the years at various workshops for students and families that focus on navigating the process. As transcendent as the…

  17. Titanium processing using selective laser sintering

    Science.gov (United States)

    Harlan, Nicole Renee

    1999-11-01

    A materials development workstation specifically designed to test high temperature metal and metal-matrix composites for direct selective laser sintering (SLS) was constructed. Using the workstation, a titanium-aluminum alloy was sintered into single layer coupons to demonstrate the feasibility of producing titanium components using direct SLS. A combination of low temperature indirect SLS and colloidal infiltration was used to create "partially-stabilized" zirconia molds for titanium casting. The base material, stabilized zirconia mixed with a copolymer, was laser sintered into the desired mold geometry. The copolymer was pyrolyzed and replaced by a zirconia precursor. The flexural strength and surface roughness of the SLS-produced casting molds were sufficient for titanium casting trials. A laser-scanned human femur was used as the basis for a mold design and technology demonstration. Titanium castings produced from SLS molds exhibited typical as-cast microstructures and an average surface roughness (Ra) of 8 mum.

  18. Tutorial

    DEFF Research Database (Denmark)

    Bender, Ralf; Berg, Gabriele; Zeeb, Hajo

    2005-01-01

    Confidence intervals represent a routinely used standard method to document the uncertainty of estimated effects. In most cases, for the calculation of confidence intervals the conventional fixed 95% confidence level is used. Confidence curves represent a graphical illustration of confidence...... attention to the different interpretation of one- and two-sided statistical inference. It is shown that these two options also have influence on the plotting of appropriate confidence curves. We illustrate the use of one- and two-sided confidence curves and explain their correct interpretation. In medical...

  19. LHC@home online tutorial for Mac users - recording

    CERN Document Server

    CERN. Geneva

    2016-01-01

    A step-by-step online tutorial about LHC@home for Mac users by Alexandre Racine. It contains detailed instructions on how-to-join this volunteer computing project.  There are 3 screen capture videos with the real installation process accelerated attached to the event page. This 5' video is linked from http://lhcathome.web.cern.ch/join-us Also from the CDS e-learning category.

  20. Divergence Measures Tool:An Introduction with Brief Tutorial

    Science.gov (United States)

    2014-03-01

    on tutorial are provided in this report. 15. SUBJECT TERMS Divergence measures, natural language processing, text corpus, text domain, text genre ...in detecting differences across a wide range of Arabic-language text files (they varied by genre , domain, spelling variation, size, etc.), our...screenshots are cropped down to that portion of screen layout most relevant to the accompanying description . Cropped screenshots in figures in sections

  1. Using Card Games to Simulate the Process of Natural Selection

    Science.gov (United States)

    Grilliot, Matthew E.; Harden, Siegfried

    2014-01-01

    In 1858, Darwin published "On the Origin of Species by Means of Natural Selection." His explanation of evolution by natural selection has become the unifying theme of biology. We have found that many students do not fully comprehend the process of evolution by natural selection. We discuss a few simple games that incorporate hands-on…

  2. Solvent selection methodology for pharmaceutical processes: Solvent swap

    DEFF Research Database (Denmark)

    Papadakis, Emmanouil; Kumar Tula, Anjan; Gani, Rafiqul

    2016-01-01

    A method for the selection of appropriate solvents for the solvent swap task in pharmaceutical processes has been developed. This solvent swap method is based on the solvent selection method of Gani et al. (2006) and considers additional selection criteria such as boiling point difference, volati...

  3. Intermediate product selection and blending in the food processing industry

    DEFF Research Database (Denmark)

    Kilic, Onur A.; Akkerman, Renzo; van Donk, Dirk Pieter

    2013-01-01

    This study addresses a capacitated intermediate product selection and blending problem typical for two-stage production systems in the food processing industry. The problem involves the selection of a set of intermediates and end-product recipes characterising how those selected intermediates...

  4. Process for selective grinding of coal

    Science.gov (United States)

    Venkatachari, Mukund K.; Benz, August D.; Huettenhain, Horst

    1991-01-01

    A process for preparing coal for use as a fuel. Forming a coal-water slurry having solid coal particles with a particle size not exceeding about 80 microns, transferring the coal-water slurry to a solid bowl centrifuge, and operating same to classify the ground coal-water slurry to provide a centrate containing solid particles with a particle size distribution of from about 5 microns to about 20 microns and a centrifuge cake of solids having a particle size distribution of from about 10 microns to about 80 microns. The classifer cake is reground and mixed with fresh feed to the solid bowl centrifuge for additional classification.

  5. The genre tutorial and social networks terminology

    Directory of Open Access Journals (Sweden)

    Márcio Sales Santiago

    2014-02-01

    Full Text Available This paper analyzes the terminology in the Internet social networks tutorials. A tutorial is a specialized text, full of terms, aiming to teach an individual or group of individuals who need some guidelines to operationalize a computerized tool, such as a social network. It is necessary to identify linguistic and terminological characteristics from the specialized lexical units in this digital genre. Social networks terminology is described and exemplified here. The results show that it is possible to refer to two specific terminologies in tutorials which help to determine the terminological profile of the thematic area, specifically from the point of view of denomination.

  6. OAI-PMH basics Tutorial 3

    CERN Document Server

    CERN. Geneva

    2007-01-01

    This tutorial is aimed at those who are new to the area of repositories and who want to learn more about key advocacy and policy issues. The tutorial will include information and advice on putting together an institutional advocacy campaign and developing policies for your repository. There will be opportunities for participants to share experiences and to ask questions. The tutorial will include a practical exercise in developing an advocacy presentation. Participants with experience of advocacy are welcome to attend the session to share their experiences, but should bear in mind that it is aimed primarily at those looking for help and advice in advocacy matters.

  7. Advocacy and policy issues Tutorial 2

    CERN Document Server

    CERN. Geneva

    2007-01-01

    This tutorial is aimed at those who are new to the area of repositories and who want to learn more about key advocacy and policy issues. The tutorial will include information and advice on putting together an institutional advocacy campaign and developing policies for your repository. There will be opportunities for participants to share experiences and to ask questions. The tutorial will include a practical exercise in developing an advocacy presentation. Participants with experience of advocacy are welcome to attend the session to share their experiences, but should bear in mind that it is aimed primarily at those looking for help and advice in advocacy matters.

  8. Sundance 2.0 tutorial.

    Energy Technology Data Exchange (ETDEWEB)

    Long, Kevin R.

    2004-07-01

    Sundance is a system of software components that allows construction of an entire parallel simulator and its derivatives using a high-level symbolic language. With this high-level problem description, it is possible to specify a weak formulation of a PDE and its discretization method in a small amount of user-level code; furthermore, because derivatives are easily available, a simulation in Sundance is immediately suitable for accelerated PDE-constrained optimization algorithms. This paper is a tutorial for setting up and solving linear and nonlinear PDEs in Sundance. With several simple examples, we show how to set up mesh objects, geometric regions for BC application, the weak form of the PDE, and boundary conditions. Each example then illustrates use of an appropriate solver and solution visualization.

  9. The Added Value of the Project Selection Process

    Directory of Open Access Journals (Sweden)

    Adel Oueslati

    2016-06-01

    Full Text Available The project selection process comes in the first stage of the overall project management life cycle. It does have a very important impact on organization success. The present paper provides defi nitions of the basic concepts and tools related to the project selection process. It aims to stress the added value of this process for the entire organization success. The mastery of the project selection process is the right way for any organization to ensure that it will do the right project with the right resources at the right time and within the right priorities

  10. Oracle support provides a range of new tutorials

    CERN Multimedia

    2012-01-01

    The IT DB is pleased to announce a new series of Oracle tutorials, with the proposed schedule. Note that these tutorials will take place in the Filtration Plant (Building 222) and that no registration is required.   4 June (Monday) 09:00 Oracle Architecture, Przemyslaw Adam Radowiecki The objective is to go through Oracle database physical and logical structures, highlighting the consequences of some of Oracle's internal design choices for developers of database applications. The presentation defines Oracle-related basic terms and illustrates them based on the database architecture. The following topics will be discussed: • Database with its physical and logical structures (tablespace, segment, extent, block, database user, schema, user's quota) • Single instance (significant memory structures: buffer cache, shared pool) • Real Application Cluster (RAC) • Connecting to the database (TNS, database service) • SQL statement processing (h...

  11. BENEFITS FROM TAKING A PRIVATE TUTORIAL COURSE FOR EXAM PREPARATION?

    DEFF Research Database (Denmark)

    la Cour, Lisbeth; Milhøj, Anders

    2015-01-01

    We analyze the effects of taking an extra private tutorial course on the passing probability and the grade in a course in Macroeconomics at the Business Diploma study program at Copenhagen Business School. The topic is of interest as the students are not supposed to need such an extra course...... to a potential problem of self selection, as it may be the weaker students who signs up for the courses, we also apply more advanced statistical models. Still, our conclusions are not changed. We argue for the use of gender as an exogenous driver when taking self selection into account....

  12. Numerical Model based Reliability Estimation of Selective Laser Melting Process

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2014-01-01

    Selective laser melting is developing into a standard manufacturing technology with applications in various sectors. However, the process is still far from being at par with conventional processes such as welding and casting, the primary reason of which is the unreliability of the process. While...... of the selective laser melting process. A validated 3D finite-volume alternating-direction-implicit numerical technique is used to model the selective laser melting process, and is calibrated against results from single track formation experiments. Correlation coefficients are determined for process input...... parameters such as laser power, speed, beam profile, etc. Subsequently, uncertainties in the processing parameters are utilized to predict a range for the various outputs, using a Monte Carlo method based uncertainty analysis methodology, and the reliability of the process is established....

  13. Selecting public relations personnel of hospitals by analytic network process.

    Science.gov (United States)

    Liao, Sen-Kuei; Chang, Kuei-Lun

    2009-01-01

    This study describes the use of analytic network process (ANP) in the Taiwanese hospital public relations personnel selection process. Starting with interviewing 48 practitioners and executives in north Taiwan, we collected selection criteria. Then, we retained the 12 critical criteria that were mentioned above 40 times by theses respondents, including: interpersonal skill, experience, negotiation, language, ability to follow orders, cognitive ability, adaptation to environment, adaptation to company, emotion, loyalty, attitude, and Response. Finally, we discussed with the 20 executives to take these important criteria into three perspectives to structure the hierarchy for hospital public relations personnel selection. After discussing with practitioners and executives, we find that selecting criteria are interrelated. The ANP, which incorporates interdependence relationships, is a new approach for multi-criteria decision-making. Thus, we apply ANP to select the most optimal public relations personnel of hospitals. An empirical study of public relations personnel selection problems in Taiwan hospitals is conducted to illustrate how the selection procedure works.

  14. Understanding Medical Words Tutorial: Download Instructions

    Science.gov (United States)

    ... https://medlineplus.gov/medwords/medicalwordsdownload.html Understanding Medical Words Tutorial: Download Instructions To use the sharing features ... no Internet connection is available. Download: Understanding Medical Words [16MB zip file] Download instructions : Click on the ...

  15. The BTeV Software Tutorial Suite

    Energy Technology Data Exchange (ETDEWEB)

    Robert K. Kutschke

    2004-02-20

    The BTeV Collaboration is starting to develop its C++ based offline software suite, an integral part of which is a series of tutorials. These tutorials are targeted at a diverse audience, including new graduate students, experienced physicists with little or no C++ experience, those with just enough C++ to be dangerous, and experts who need only an overview of the available tools. The tutorials must both teach C++ in general and the BTeV specific tools in particular. Finally, they must teach physicists how to find and use the detailed documentation. This report will review the status of the BTeV experiment, give an overview of the plans for and the state of the software and will then describe the plans for the tutorial suite.

  16. Tutorials in university students with a disability

    Directory of Open Access Journals (Sweden)

    Joaquín Gairín Sallán

    2013-10-01

    Full Text Available This article places an emphasis on the importance of tutorials for students with a disability in universities. It presented the most significant results of the study of tutorials carried out in help services, units or offices for students with a disability inmore than 45 Spanish universities, in relation to promotion, reception, completion and graduation. The contributions highlight the importance of organising a response through a Tutorial Action Plan made up of the stages of motivation and awareness-raisin, planning, execution, evaluation and institutionalisation. Among the principle conclusions, the importance of moving towards a truly inclusive university through tutorial activity is highlighted, thereby providing a guide for providing assistance to university students with a disability.

  17. PLANES DE ACCIÓN TUTORIAL

    National Research Council Canada - National Science Library

    Jorge Orós

    2014-01-01

    ... de Acción Tutorial que contribuyan a la mejora de los resultados académicos. Los Planes de Acción Tutorial, en su sentido más amplio, pueden incluir los siguientes aspectos: * Programa de captación de estudiantes Objetivo: incrementar la demanda de preinscripciones y en consecuencia, aumentar la nota mínima de ingreso. * Programa de acogida Objetivo: fac...

  18. Risk calculations in the manufacturing technology selection process

    DEFF Research Database (Denmark)

    Farooq, S.; O'Brien, C.

    2010-01-01

    and supports an industrial manager in achieving objective and comprehensive decisions regarding selection of a manufacturing technology. Originality/value - The paper explains the process of risk calculation in manufacturing technology selection by dividing the decision-making environment into manufacturing......Purpose - The purpose of this paper is to present result obtained from a developed technology selection framework and provide a detailed insight into the risk calculations and their implications in manufacturing technology selection process. Design/methodology/approach - The results illustrated...... in the paper are the outcome of an action research study that was conducted in an aerospace company. Findings - The paper highlights the role of risk calculations in manufacturing technology selection process by elaborating the contribution of risk associated with manufacturing technology alternatives...

  19. Natural Selection Is a Sorting Process: What Does that Mean?

    Science.gov (United States)

    Price, Rebecca M.

    2013-01-01

    To learn why natural selection acts only on existing variation, students categorize processes as either creative or sorting. This activity helps students confront the misconception that adaptations evolve because species need them.

  20. Process for selected gas oxide removal by radiofrequency catalysts

    Science.gov (United States)

    Cha, Chang Y.

    1993-01-01

    This process to remove gas oxides from flue gas utilizes adsorption on a char bed subsequently followed by radiofrequency catalysis enhancing such removal through selected reactions. Common gas oxides include SO.sub.2 and NO.sub.x.

  1. Ambient ionization mass spectrometry: A tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Min-Zong; Cheng, Sy-Chi; Cho, Yi-Tzu [Department of Chemistry, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Shiea, Jentaie, E-mail: jetea@fac.nsysu.edu.tw [Department of Chemistry, National Sun Yat-Sen University, Kaohsiung, Taiwan (China); Cancer Center, Kaohsiung Medical University, Kaohsiung, Taiwan (China)

    2011-09-19

    Highlights: {yields} Ambient ionization technique allows the direct analysis of sample surfaces with little or no sample pretreatment. {yields} We sort ambient ionization techniques into three main analytical strategies, direct ionization, direct desorption/ionization, and two-step ionization. {yields} The underlying principles of operation, ionization processes, detecting mass ranges, sensitivity, and representative applications of these techniques are described and compared. - Abstract: Ambient ionization is a set of mass spectrometric ionization techniques performed under ambient conditions that allows the direct analysis of sample surfaces with little or no sample pretreatment. Using combinations of different types of sample introduction systems and ionization methods, several novel techniques have been developed over the last few years with many applications (e.g., food safety screening; detection of pharmaceuticals and drug abuse; monitoring of environmental pollutants; detection of explosives for antiterrorism and forensics; characterization of biological compounds for proteomics and metabolomics; molecular imaging analysis; and monitoring chemical and biochemical reactions). Electrospray ionization and atmospheric pressure chemical ionization are the two main ionization principles most commonly used in ambient ionization mass spectrometry. This tutorial paper provides a review of the publications related to ambient ionization techniques. We describe and compare the underlying principles of operation, ionization processes, detecting mass ranges, sensitivity, and representative applications of these techniques.

  2. Overview of the software inspection process

    Energy Technology Data Exchange (ETDEWEB)

    Lane, G.L.; Dabbs, R. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  3. KNIME for Open-Source Bioimage Analysis: A Tutorial.

    Science.gov (United States)

    Dietz, Christian; Berthold, Michael R

    2016-01-01

    The open analytics platform KNIME is a modular environment that enables easy visual assembly and interactive execution of workflows. KNIME is already widely used in various areas of research, for instance in cheminformatics or classical data analysis. In this tutorial the KNIME Image Processing Extension is introduced, which adds the capabilities to process and analyse huge amounts of images. In combination with other KNIME extensions, KNIME Image Processing opens up new possibilities for inter-domain analysis of image data in an understandable and reproducible way.

  4. A 5' online tutorial about 'how to prepare for a 5' online tutorial'

    CERN Document Server

    CERN. Geneva

    2016-01-01

    This 4' video summarises our experience from short online tutorial recordings for the last 6 months. It contains important points for speakers' preparation and things to observe during the online tutorial recordings. For more details, check out our e-learning twiki.

  5. Making generic tutorials content specific: recycling evidence-based practice (EBP) tutorials for two disciplines.

    Science.gov (United States)

    Jeffery, Keven M; Maggio, Lauren; Blanchard, Mary

    2009-01-01

    Librarians at the Boston University Medical Center constructed two interactive online tutorials, "Introduction to EBM" and "Formulating a Clinical Question (PICO)," for a Family Medicine Clerkship and then quickly repurposed the existing tutorials to support an Evidence-based Dentistry course. Adobe's ColdFusion software was used to populate the tutorials with course-specific content based on the URL used to enter each tutorial, and a MySQL database was used to collect student input. Student responses were viewable immediately by course faculty on a password-protected Web site. The tutorials ensured that all students received the same baseline training and allowed librarians to tailor a subsequent library skills workshop to student tutorial answers. The tutorials were well-received by the medical and dental schools and have been added to mandatory first-year Evidence-based Medicine (EBM) and Evidence-based Dentistry (EBD) courses, meaning that every medical and dental student at BUMC will be expected to complete these tutorials.

  6. Topics and features of academic medical library tutorials.

    Science.gov (United States)

    Anderson, Rozalynd P; Wilson, Steven P; Yeh, Felicia; Phillips, Betty; Livingston, Mary Briget

    2008-01-01

    In a 2007 study, librarians at the University of South Carolina School of Medicine Library examined freely available online tutorials on academic medical library Web sites. The team identified tutorial topics, determined common design features, and assessed elements of active learning in library-created tutorials; the team also generated a list of third-party tutorials to which medical libraries link. This article updates the earlier study, describing changes and trends in tutorial content and design on medical libraries' Web sites; the project team plans to continue to track trends in tutorial development by repeating this study annually.

  7. Tutorial on Protein Ontology Resources.

    Science.gov (United States)

    Arighi, Cecilia N; Drabkin, Harold; Christie, Karen R; Ross, Karen E; Natale, Darren A

    2017-01-01

    The Protein Ontology (PRO) is the reference ontology for proteins in the Open Biomedical Ontologies (OBO) foundry and consists of three sub-ontologies representing protein classes of homologous genes, proteoforms (e.g., splice isoforms, sequence variants, and post-translationally modified forms), and protein complexes. PRO defines classes of proteins and protein complexes, both species-specific and species nonspecific, and indicates their relationships in a hierarchical framework, supporting accurate protein annotation at the appropriate level of granularity, analyses of protein conservation across species, and semantic reasoning. In the first section of this chapter, we describe the PRO framework including categories of PRO terms and the relationship of PRO to other ontologies and protein resources. Next, we provide a tutorial about the PRO website ( proconsortium.org ) where users can browse and search the PRO hierarchy, view reports on individual PRO terms, and visualize relationships among PRO terms in a hierarchical table view, a multiple sequence alignment view, and a Cytoscape network view. Finally, we describe several examples illustrating the unique and rich information available in PRO.

  8. Trilinos 4.0 tutorial.

    Energy Technology Data Exchange (ETDEWEB)

    Sala, Marzio; Day, David Minot; Heroux, Michael Allen

    2004-05-01

    The Trilinos Project is an effort to facilitate the design, development, integration and ongoing support of mathematical software libraries. The goal of the Trilinos Project is to develop parallel solver algorithms and libraries within an object-oriented software framework for the solution of large-scale, complex multiphysics engineering and scientific applications. The emphasis is on developing robust, scalable algorithms in a software framework, using abstract interfaces for flexible interoperability of components while providing a full-featured set of concrete classes that implement all the abstract interfaces. This document introduces the use of Trilinos, version 4.0. The presented material includes, among others, the definition of distributed matrices and vectors with Epetra, the iterative solution of linear systems with AztecOO, incomplete factorizations with IF-PACK, multilevel and domain decomposition preconditioners with ML, direct solution of linear system with Amesos, and iterative solution of nonlinear systems with NOX. The tutorial is a self-contained introduction, intended to help computational scientists effectively apply the appropriate Trilinos package to their applications. Basic examples are presented that are fit to be imitated. This document is a companion to the Trilinos User's Guide [20] and Trilinos Development Guides [21,22]. Please note that the documentation included in each of the Trilinos' packages is of fundamental importance.

  9. GOCE User Toolbox and Tutorial

    Science.gov (United States)

    Benveniste, J.; Knudsen, P.

    2013-12-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. Recently, the second version of the GOCE User Toolbox (GUT) was developed to enhance the exploitation of GOCE level 2 data with ERS ENVISAT altimetry. The developments of GUT focused on the following issues: Data Extraction, Generation, Filtering, and Data Save and Restore Without any doubt the development of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for oceanography. The results of the preliminary analysis carried out in this phase of the GUTS project have already demonstrated a significant advance in the ability to determine the ocean's general circulation. The improved gravity models provided by the GOCE mission have enhanced the resolution and sharpened the boundaries of those features compared with earlier satellite only solutions. Calculation of the geostrophic surface currents from the MDT reveals improvements for all of the ocean's major current systems.

  10. A review of channel selection algorithms for EEG signal processing

    Science.gov (United States)

    Alotaiby, Turky; El-Samie, Fathi E. Abd; Alshebeili, Saleh A.; Ahmad, Ishtiaq

    2015-12-01

    Digital processing of electroencephalography (EEG) signals has now been popularly used in a wide variety of applications such as seizure detection/prediction, motor imagery classification, mental task classification, emotion classification, sleep state classification, and drug effects diagnosis. With the large number of EEG channels acquired, it has become apparent that efficient channel selection algorithms are needed with varying importance from one application to another. The main purpose of the channel selection process is threefold: (i) to reduce the computational complexity of any processing task performed on EEG signals by selecting the relevant channels and hence extracting the features of major importance, (ii) to reduce the amount of overfitting that may arise due to the utilization of unnecessary channels, for the purpose of improving the performance, and (iii) to reduce the setup time in some applications. Signal processing tools such as time-domain analysis, power spectral estimation, and wavelet transform have been used for feature extraction and hence for channel selection in most of channel selection algorithms. In addition, different evaluation approaches such as filtering, wrapper, embedded, hybrid, and human-based techniques have been widely used for the evaluation of the selected subset of channels. In this paper, we survey the recent developments in the field of EEG channel selection methods along with their applications and classify these methods according to the evaluation approach.

  11. Selection of Fuel by Using Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Asilata M. Damle,

    2015-04-01

    Full Text Available Selection of fuel is a very important and critical decision one has to make. Various criteria are to be considered while selecting a fuel. Some of important criteria are Fuel Economy, Availability of fuel, Pollution from vehicle, Maintenance of the vehicle. Selection of best fuel is a complex situation. It needs a multi-criteria analysis. Earlier, the solution to the problem were found by applying classical numerical methods which took into account only technical and economic merits of the various alternatives. By applying multi-criteria tools, it is possible to obtain more realistic results. This paper gives a systematic analysis for selection of fuel by using Analytical Hierarchy Process (AHP. This is a multi-criteria decision making process. By using AHP we can select the fuel by comparing various factors in a mathematical model. This is a scientific method to find out the best fuel by making pairwise comparisons.

  12. Natural Language Processing: A Tutorial. Revision

    Science.gov (United States)

    1990-01-01

    consider are: ambiguity, anaphoric reference, and ellipsis. A human utterance is ambiguous if it has two or more possible interpretations. There are a...specific in that reference. The following examples demonstrate the concept, and some of the distinguishable types, of anaphoric reference [Webber; 1979...34A girl handed the baby the toys." Government- Binding (GB) Theory Existence of the complicated system of rules of early Transformational Grammar Theory

  13. Process chain modeling and selection in an additive manufacturing context

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Stolfi, Alessandro; Mischkot, Michael

    2016-01-01

    can compete with traditional process chains for small production runs. Combining both types of technology added cost but no benefit in this case. The new process chain model can be used to explain the results and support process selection, but process chain prototyping is still important for rapidly......This paper introduces a new two-dimensional approach to modeling manufacturing process chains. This approach is used to consider the role of additive manufacturing technologies in process chains for a part with micro scale features and no internal geometry. It is shown that additive manufacturing...

  14. Selection process for trade study: Graphite Composite Primary Structure (GCPS)

    Science.gov (United States)

    Greenberg, H. S.

    1994-01-01

    This TA 2 document describes the selection process that will be used to identify the most suitable structural configuration for an SSTO winged vehicle capable of delivering 25,000 lbs to a 220 nm circular orbit at 51.6 degree inclination. The most suitable unpressurized graphite composite structures and material selections is within this configuration and will be the prototype design for subsequent design and analysis and the basis for the design and fabrication of payload bay, wing, and thrust structure full scale test articles representing segments of the prototype structures. The selection process for this TA 2 trade study is the same as that for the TA 1 trade study. As the trade study progresses additional insight may result in modifications to the selection criteria within this process. Such modifications will result in an update of this document as appropriate.

  15. FIN 403 UOP Course Tutorial / fin403dotcom

    OpenAIRE

    anil10

    2015-01-01

    FIN 403 Entire Course For more course tutorials visit www.fin403.com   FIN 403 Week 1 Individual Assignment Global Finance Environment Paper FIN 403 Week 1 DQ 1 FIN 403 Week 1 DQ 2 FIN 403 Week 1 Summary FIN403 Week 2 Learning Team Assignment Investment Decision Selection Paper   FIN 403 Week 2 DQ 1 FIN 403 Week 2 DQ 2 FIN 403 Week 2 Summary FIN 403 Week 3 Learning Team Assignment Foreign Exchange and Derivatives Market Paper F...

  16. A Tutorial on Microwave Photonic Filters

    Science.gov (United States)

    Capmany, José; Ortega, Beatriz; Pastor, Daniel

    2006-01-01

    Microwave photonic filters are photonic subsystems designed with the aim of carrying equivalent tasks to those of an ordinary microwave filter within a radio frequency (RF) system or link, bringing supplementary advantages inherent to photonics such as low loss, high bandwidth, immunity to electromagnetic interference (EMI), tunability, and reconfigurability. There is an increasing interest in this subject since, on one hand, emerging broadband wireless access networks and standards spanning from universal mobile telecommunications system (UMTS) to fixed access picocellular networks and including wireless local area network (WLAN), World Interoperability for Microwave Access, Inc. (WIMAX), local multipoint distribution service (LMDS), etc., require an increase in capacity by reducing the coverage area. An enabling technology to obtain this objective is based on radio-over-fiber (RoF) systems where signal processing is carried at a central office to where signals are carried from inexpensive remote antenna units (RAUs). On the other hand, microwave photonic filters can find applications in specialized fields such as radar and photonic beamsteering of phased-arrayed antennas, where dynamical reconfiguration is an added value. This paper provides a tutorial introduction of this subject to the reader not working directly in the field but interested in getting an overall introduction of the subject and also to the researcher wishing to get a comprehensive background before working on the subject.

  17. MSTAR extended operating conditions: a tutorial

    Science.gov (United States)

    Keydel, Eric R.; Lee, Shung W.; Moore, John T.

    1996-06-01

    One key advantage of the model-based approach for automatic target recognition (ATR) is the wide range of targets and acquisition scenarios that can be accommodated without algorithm re-training. This accrues from the use of predictive models which can be adjusted to hypothesized scenarios on-line. Approaches which rely on measured signature exemplars as the source of reference data for signature matching are constrained to those scenarios represented in the reference data base. The moving and stationary target recognition (MSTAR) program will advance the state-of-the-art in model-based ATR by developing, evaluating, and testing algorithm performance against a set of extended operating conditions (EOCs) designed to reflect real-world battlefield scenarios. In addition to full 360 deg target aspect coverage over a range of depression angles, the EOCs include variations in squint angle, target articulation and configurations, obscuration due to occlusion and/or layover, and intra-class target variability. These conditions can have a profound impact on the nature of the target signature, necessitating the development of explicit prediction and reasoning algorithms to provide robust target recognition. This paper provides a tutorial description of the impact of the MSTAR EOCs on SAR target signatures. A brief background discussion of the SAR imaging process is presented first. This is followed by a description of the impact of each EOC category on the target signature along with synthetic imagery examples to illustrate this impact.

  18. Concurrent materials and process selection in conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Kleban, Stephen D.; Knorovsky, Gerald A.

    2000-08-16

    A method for concurrent selection of materials and a joining process based on product requirements using a knowledge-based, constraint satisfaction approach facilitates the product design and manufacturing process. Using a Windows-based computer video display and a data base of materials and their properties, the designer can ascertain the preferred composition of two parts based on various operating/environmental constraints such as load, temperature, lifetime, etc. Optimum joinder of the two parts may simultaneously be determined using a joining process data base based upon the selected composition of the components as well as the operating/environmental constraints.

  19. Pharmacometrics and Systems Pharmacology Software Tutorials and Use: Comments and Guidelines for PSP Contributions.

    Science.gov (United States)

    Vicini, P; Friberg, L E; van der Graaf, P H; Rostami-Hodjegan, A

    2013-12-18

    In addition to methodological Tutorials,(1) CPT:PSP has recently started to publish software Tutorials.(2,3) Our readership and authors may be wondering what kind of format or product is expected, and the review of submissions we have already received prompted several discussions within the PSP Editorial Team. This editorial reflects on these discussions and summarizes their salient points. It aims at providing some details about the current vision of CPT:PSP for software tutorial articles. In addition, it brings some clarity on the topic of what role commercial software tutorials can have in CPT:PSP and how CPT:PSP tutorials differ from publications which describe the software itself, as those which can be found in other computer science journals. Finally, the discussion includes reproducibility considerations and the general use of commercial and noncommercial software in CPT:PSP publications. We hope our thoughts, and especially a stated requirement to publish user input to the software to aid in reproducibility, will help in guiding our authors and will stimulate healthy debate among our readers about the evolving nature of our science, how it can be facilitated using software and associated databases as a conduit, and what role this journal can play in fostering both the best modeling and simulation practices and the best scientific approaches to computational modeling, to bring the advantages of modeling and simulation to all regular practitioners, and not to just a (self) selected few.

  20. Introduction to gas lasers with emphasis on selective excitation processes

    CERN Document Server

    Willett, Colin S

    1974-01-01

    Introduction to Gas Lasers: Population Inversion Mechanisms focuses on important processes in gas discharge lasers and basic atomic collision processes that operate in a gas laser. Organized into six chapters, this book first discusses the historical development and basic principles of gas lasers. Subsequent chapters describe the selective excitation processes in gas discharges and the specific neutral, ionized and molecular laser systems. This book will be a valuable reference on the behavior of gas-discharge lasers to anyone already in the field.

  1. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting-Selection Guidelines.

    Science.gov (United States)

    Gokuldoss, Prashanth Konda; Kolla, Sri; Eckert, Jürgen

    2017-06-19

    Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties.

  2. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

    Directory of Open Access Journals (Sweden)

    Prashanth Konda Gokuldoss

    2017-06-01

    Full Text Available Additive manufacturing (AM, also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting for fabricating a specific component with a defined set of material properties.

  3. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

    Science.gov (United States)

    Konda Gokuldoss, Prashanth; Kolla, Sri; Eckert, Jürgen

    2017-01-01

    Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties. PMID:28773031

  4. GOCE User Toolbox and Tutorial

    Science.gov (United States)

    Benveniste, Jérôme; Knudsen, Per

    2016-07-01

    The GOCE User Toolbox GUT is a compilation of tools for the utilisation and analysis of GOCE Level 2 products. GUT support applications in Geodesy, Oceanography and Solid Earth Physics. The GUT Tutorial provides information and guidance in how to use the toolbox for a variety of applications. GUT consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made available as well. Without any doubt the development of the GOCE user toolbox have played a major role in paving the way to successful use of the GOCE data for oceanography. The GUT version 2.2 was released in April 2014 and beside some bug-fixes it adds the capability for the computation of Simple Bouguer Anomaly (Solid-Earth). During this fall a new GUT version 3 has been released. GUTv3 was further developed through a collaborative effort where the scientific communities participate aiming on an implementation of remaining functionalities facilitating a wider span of research in the fields of Geodesy, Oceanography and Solid earth studies. Accordingly, the GUT version 3 has: - An attractive and easy to use Graphic User Interface (GUI) for the toolbox, - Enhance the toolbox with some further software functionalities such as to facilitate the use of gradients, anisotropic diffusive filtering and computation of Bouguer and isostatic gravity anomalies. - An associated GUT VCM tool for analyzing the GOCE variance covariance matrices.

  5. Supplier Selection in Dynamic Environment using Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Prince Agarwal

    2014-08-01

    Full Text Available In today’s highly competitive business environment, the rapidly changing customer demands and with the advent of enterprise wide information systems, the managers are bound to think beyond the conventional business processes and devise new ways to squeeze out costs and improve the performance without compromising on the quality at the same time. Supplier evaluation and selection is one such area which determines the success of any manufacturing firm. Supplier selection is the problem wherein the company decides which vendor to select to have that strategic and operational advantage of meeting the customers’ varying demands and fight the fierce competition. This paper presents a simple model based on Analytic Hierarchy Process (AHP to help decision makers in supplier evaluation and selection, taking into account the firm’s requirements. The article is intended to help new scholars and researchers understand the AHP model and see different facets in first sight.

  6. An International Perspective on Pharmacy Student Selection Policies and Processes.

    Science.gov (United States)

    Shaw, John; Kennedy, Julia; Jensen, Maree; Sheridan, Janie

    2015-10-25

    Objective. To reflect on selection policies and procedures for programs at pharmacy schools that are members of an international alliance of universities (Universitas 21). Methods. A questionnaire on selection policies and procedures was distributed to admissions directors at participating schools. Results. Completed questionnaires were received from 7 schools in 6 countries. Although marked differences were noted in the programs in different countries, there were commonalities in the selection processes. There was an emphasis on previous academic performance, especially in science subjects. With one exception, all schools had some form of interview, with several having moved to multiple mini-interviews in recent years. Conclusion. The majority of pharmacy schools in this survey relied on traditional selection processes. While there was increasing use of multiple mini-interviews, the authors suggest that additional new approaches may be required in light of the changing nature of the profession.

  7. Selection of Temporal Lags When Modeling Economic and Financial Processes.

    Science.gov (United States)

    Matilla-Garcia, Mariano; Ojeda, Rina B; Marin, Manuel Ruiz

    2016-10-01

    This paper suggests new nonparametric statistical tools and procedures for modeling linear and nonlinear univariate economic and financial processes. In particular, the tools presented help in selecting relevant lags in the model description of a general linear or nonlinear time series; that is, nonlinear models are not a restriction. The tests seem to be robust to the selection of free parameters. We also show that the test can be used as a diagnostic tool for well-defined models.

  8. Multicriteria framework for selecting a process modelling language

    Science.gov (United States)

    Scanavachi Moreira Campos, Ana Carolina; Teixeira de Almeida, Adiel

    2016-01-01

    The choice of process modelling language can affect business process management (BPM) since each modelling language shows different features of a given process and may limit the ways in which a process can be described and analysed. However, choosing the appropriate modelling language for process modelling has become a difficult task because of the availability of a large number modelling languages and also due to the lack of guidelines on evaluating, and comparing languages so as to assist in selecting the most appropriate one. This paper proposes a framework for selecting a modelling language in accordance with the purposes of modelling. This framework is based on the semiotic quality framework (SEQUAL) for evaluating process modelling languages and a multicriteria decision aid (MCDA) approach in order to select the most appropriate language for BPM. This study does not attempt to set out new forms of assessment and evaluation criteria, but does attempt to demonstrate how two existing approaches can be combined so as to solve the problem of selection of modelling language. The framework is described in this paper and then demonstrated by means of an example. Finally, the advantages and disadvantages of using SEQUAL and MCDA in an integrated manner are discussed.

  9. Dynamical systems on networks a tutorial

    CERN Document Server

    Porter, Mason A

    2016-01-01

    This volume is a tutorial for the study of dynamical systems on networks. It discusses both methodology and models, including spreading models for social and biological contagions. The authors focus especially on “simple” situations that are analytically tractable, because they are insightful and provide useful springboards for the study of more complicated scenarios. This tutorial, which also includes key pointers to the literature, should be helpful for junior and senior undergraduate students, graduate students, and researchers from mathematics, physics, and engineering who seek to study dynamical systems on networks but who may not have prior experience with graph theory or networks. Mason A. Porter is Professor of Nonlinear and Complex Systems at the Oxford Centre for Industrial and Applied Mathematics, Mathematical Institute, University of Oxford, UK. He is also a member of the CABDyN Complexity Centre and a Tutorial Fellow of Somerville College. James P. Gleeson is Professor of Industrial and Appli...

  10. Attribute based selection of thermoplastic resin for vacuum infusion process

    DEFF Research Database (Denmark)

    Prabhakaran, R.T. Durai; Lystrup, Aage; Løgstrup Andersen, Tom

    2011-01-01

    The composite industry looks toward a new material system (resins) based on thermoplastic polymers for the vacuum infusion process, similar to the infusion process using thermosetting polymers. A large number of thermoplastics are available in the market with a variety of properties suitable...... for different engineering applications, and few of those are available in a not yet polymerised form suitable for resin infusion. The proper selection of a new resin system among these thermoplastic polymers is a concern for manufactures in the current scenario and a special mathematical tool would...... be beneficial. In this paper, the authors introduce a new decision making tool for resin selection based on significant attributes. This article provides a broad overview of suitable thermoplastic material systems for vacuum infusion process available in today’s market. An illustrative example—resin selection...

  11. Video and HTML: Testing Online Tutorial Formats with Biology Students

    Science.gov (United States)

    Craig, Cindy L.; Friehs, Curt G.

    2013-01-01

    This study compared two common types of online information literacy tutorials: a streaming media tutorial using animation and narration and a text-based tutorial with static images. Nine sections of an undergraduate biology lab class (234 students total) were instructed by a librarian on how to use the BIOSIS Previews database. Three sections…

  12. Video and HTML: Testing Online Tutorial Formats with Biology Students

    Science.gov (United States)

    Craig, Cindy L.; Friehs, Curt G.

    2013-01-01

    This study compared two common types of online information literacy tutorials: a streaming media tutorial using animation and narration and a text-based tutorial with static images. Nine sections of an undergraduate biology lab class (234 students total) were instructed by a librarian on how to use the BIOSIS Previews database. Three sections…

  13. Progress Report--Microsoft Office 2003 Lynchburg College Tutorials

    Science.gov (United States)

    Murray, Tom

    2004-01-01

    For the past several years Lynchburg College has developed Microsoft tutorials for use with academic classes and faculty, student and staff training. The tutorials are now used internationally. Last year Microsoft and Verizon sponsored a tutorial web site at http://www.officetutorials.com. This website recognizes ASCUE members for their wonderful…

  14. Analysis of Web-Based Tutorials Created by Academic Libraries

    Science.gov (United States)

    Somoza-Fernandez, Marta; Abadal, Ernest

    2009-01-01

    This paper aims to analyse the characteristics of tutorials created by academic libraries. It evaluates a sample of 180 tutorials by applying thirty basic indicators referring to general characteristics, content, teaching methodology, usability and technology. The general conclusion is that most of the tutorials are at an early stage of…

  15. PHI 200 ASH Course Tutorial/ Tutorialrank

    OpenAIRE

    john

    2015-01-01

    For more course tutorials visit www.tutorialrank.com Tutorial Purchased: 5 Times, Rating: A+   PHI 200 Week 2 DQ 1 Ethics and Relativism PHI 200 Week 2 DQ 2 Animal Rights PHI 200 Week 2 Written Assignment Assisted Suicide PHI 200 Week 3 DQ 1 The Limits of Skepticism PHI 200 Week 3 DQ 2 Creationism and Science PHI 200 Week 3 Written Assignment Final Paper (Death Penalty) PHI 200 Week 4 DQ 1 Proof of God's Existence PHI 200 Week 4 DQ 2 The Tu...

  16. Subtitled video tutorials, an accessible teaching material

    Directory of Open Access Journals (Sweden)

    Luis Bengochea

    2012-11-01

    Full Text Available The use of short-lived audio-visual tutorials constitutes an educational resource very attractive for young students, widely familiar with this type of format similar to YouTube clips. Considered as "learning pills", these tutorials are intended to strengthen the understanding of complex concepts that because their dynamic nature can’t be represented through texts or diagrams. However, the inclusion of this type of content in eLearning platforms presents accessibility problems for students with visual or hearing disabilities. This paper describes this problem and shows the way in which a teacher could add captions and subtitles to their videos.

  17. First year clinical tutorials: students’ learning experience

    Directory of Open Access Journals (Sweden)

    Burgess A

    2014-11-01

    Full Text Available Annette Burgess,1 Kim Oates,2 Kerry Goulston,2 Craig Mellis1 1Central Clinical School, Sydney Medical School, The University of Sydney, Sydney, NSW, Australia; 2Sydney Medical School, The University of Sydney, Sydney, NSW, Australia Background: Bedside teaching lies at the heart of medical education. The learning environment afforded to students during clinical tutorials contributes substantially to their knowledge, thinking, and learning. Situated cognition theory posits that the depth and breadth of the students' learning experience is dependent upon the attitude of the clinical teacher, the structure of the tutorial, and the understanding of tutorial and learning objectives. This theory provides a useful framework to conceptualize how students' experience within their clinical tutorials impacts their knowledge, thinking, and learning. Methods: The study was conducted with one cohort (n=301 of students who had completed year 1 of the medical program at Sydney Medical School in 2013. All students were asked to complete a three-part questionnaire regarding their perceptions of their clinical tutor's attributes, the consistency of the tutor, and the best features of the tutorials and need for improvement. Both quantitative and qualitative data were collected and analyzed using descriptive statistics. Results: The response rate to the questionnaire was 88% (265/301. Students perceived that their tutors displayed good communication skills and enthusiasm, encouraged their learning, and were empathetic toward patients. Fifty-two percent of students reported having the same communications tutor for the entire year, and 28% reported having the same physical examination tutor for the entire year. Students would like increased patient contact, greater structure within their tutorials, and greater alignment of teaching with the curriculum. Conclusion: Situated cognition theory provides a valuable lens to view students' experience of learning within the

  18. Application of concept selection methodology in IC process design

    Science.gov (United States)

    Kim, Myung-Kul

    1993-01-01

    Search for an effective methodology practical in IC manufacturing process development led to trial of quantitative 'concept selection' methodology in selecting the 'best' alternative for interlevel dielectric (ILD) processes. A cross-functional team selected multi-criteria with scoring guidelines to be used in the definition of the 'best'. The project was targeted for the 3 level metal backend process for sub-micron gate array product. The outcome of the project showed that the maturity of the alternatives has strong influence on the scores, because scores on the adopted criteria such as yield, reliability and maturity will depend on the maturity of a particular process. At the same time, the project took longer than expected since it required data for the multiple criteria. These observations suggest that adopting a simpler procedure that can analyze total inherent controllability of a process would be more effective. The methodology of the DFS (design for simplicity) tools used in analyzing the manufacturability of such electronics products as computers, phones and other consumer electronics products could be used as an 'analogy' in constructing an evaluation method for IC processes that produce devices used in those electronics products. This could be done by focusing on the basic process operation elements rather than the layers that are being built.

  19. A tutorial on testing the race model inequality

    DEFF Research Database (Denmark)

    Gondan, Matthias; Minakata, Katsumi

    2016-01-01

    , to faster responses to redundant signals. In contrast, coactivation models assume integrated processing of the combined stimuli. To distinguish between these two accounts, Miller (1982) derived the well-known race model inequality, which has become a routine test for behavioral data in experiments...... with redundant signals. In this tutorial, we review the basic properties of redundant signals experiments and current statistical procedures used to test the race model inequality during the period between 2011 and 2014. We highlight and discuss several issues concerning study design and the test of the race...

  20. A tutorial on queuing and trunking with applications to communications

    CERN Document Server

    Tranter, William H

    2012-01-01

    The motivation for developing this synthesis lecture was to provide a tutorial on queuing and trunking, with extensions to networks of queues, suitable for supplementing courses in communications, stochastic processes, and networking. An essential component of this lecture is MATLAB-based demonstrations and exercises, which can be easily modified to enable the student to observe and evaluate the impact of changing parameters, arrival and departure statistics, queuing disciplines, the number of servers, and other important aspects of the underlying system model. Much of the work in this lecture

  1. The "Magic" of Tutorial Centres in Hong Kong: An Analysis of Media Marketing and Pedagogy in a Tutorial Centre

    Science.gov (United States)

    Koh, Aaron

    2014-01-01

    Why do more than three-quarters of Hong Kong's senior secondary students flock to tutorial centres like moths to light? What is the "magic" that is driving the popularity of the tutorial centre enterprise? Indeed, looking at the ongoing boom of tutorial centres in Hong Kong (there are almost 1,000 of them), it is difficult not to ask…

  2. Fundamental Aspects of Selective Melting Additive Manufacturing Processes

    Energy Technology Data Exchange (ETDEWEB)

    van Swol, Frank B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, James E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    Certain details of the additive manufacturing process known as selective laser melting (SLM) affect the performance of the final metal part. To unleash the full potential of SLM it is crucial that the process engineer in the field receives guidance about how to select values for a multitude of process variables employed in the building process. These include, for example, the type of powder (e.g., size distribution, shape, type of alloy), orientation of the build axis, the beam scan rate, the beam power density, the scan pattern and scan rate. The science-based selection of these settings con- stitutes an intrinsically challenging multi-physics problem involving heating and melting a metal alloy, reactive, dynamic wetting followed by re-solidification. In addition, inherent to the process is its considerable variability that stems from the powder packing. Each time a limited number of powder particles are placed, the stacking is intrinsically different from the previous, possessing a different geometry, and having a different set of contact areas with the surrounding particles. As a result, even if all other process parameters (scan rate, etc) are exactly the same, the shape and contact geometry and area of the final melt pool will be unique to that particular configuration. This report identifies the most important issues facing SLM, discusses the fundamental physics associated with it and points out how modeling can support the additive manufacturing efforts.

  3. Intermediate product selection and blending in the food processing industry

    DEFF Research Database (Denmark)

    Kilic, Onur A.; Akkerman, Renzo; van Donk, Dirk Pieter

    2013-01-01

    This study addresses a capacitated intermediate product selection and blending problem typical for two-stage production systems in the food processing industry. The problem involves the selection of a set of intermediates and end-product recipes characterising how those selected intermediates...... are blended into end products to minimise the total operational costs under production and storage capacity limitations. A comprehensive mixed-integer linear model is developed for the problem. The model is applied on a data set collected from a real-life case. The trade-offs between capacity limitations...... and operational costs are analysed, and the effects of different types of cost parameters and capacity limitations on the selection of intermediates and end-product recipes are investigated....

  4. Process for selecting polyhydroxyalkanoate (PHA) producing micro-organisms

    NARCIS (Netherlands)

    Van Loosdrecht, M.C.M.; Kleerebezem, R.; Jian, Y.; Johnson, K.

    2009-01-01

    The invention relates to a process for selecting a polyhydroxyalkanoate (PHA) producing micro-organism from a natural source comprising a variety of micro-organisms, comprising steps of preparing a fermentation broth comprising the natural source and nutrients in water; creating and maintaining

  5. Process for selecting polyhydroxyalkanoate (PHA) producing micro-organisms

    NARCIS (Netherlands)

    Van Loosdrecht, M.C.M.; Kleerebezem, R.; Jian, Y.; Johnson, K.

    2009-01-01

    The invention relates to a process for selecting a polyhydroxyalkanoate (PHA) producing micro-organism from a natural source comprising a variety of micro-organisms, comprising steps of preparing a fermentation broth comprising the natural source and nutrients in water; creating and maintaining aero

  6. Efficiency and Effectiveness of a Resident Assistant Selection Process.

    Science.gov (United States)

    Broitman, Thomas

    The American phenomenon of "more is better" extends a value-loaded concept implicit in budget preparation. At any university, the scope, magnitude and cost of a residence hall assistant program selection process is a metaphor to illustrate efficiency and effectiveness of human resources. In order to discover a more efficient and…

  7. Learning from tutorials: a qualitative study of approaches to learning and perceptions of tutorial interaction

    DEFF Research Database (Denmark)

    Herrmann, Kim Jesper

    2014-01-01

    This study examines differences in university students’ approaches to learning when attending tutorials as well as variation in students’ perceptions of tutorials as an educational arena. In-depth qualitative analysis of semi-structured interviews with undergraduates showed how surface and deep...... approaches to learning were revealed in the students’ note-taking, listening, and engaging in dialogue. It was also shown how variation in the students’ approaches to learning were coherent with variation in the students’ perceptions of the tutors’ pedagogical role, the value of peer interaction......, and the overall purpose of tutorials. The results are discussed regarding the paradox that students relying on surface approaches to learning seemingly are the ones least likely to respond to tutorials in the way they were intended....

  8. Learning from tutorials: a qualitative study of approaches to learning and perceptions of tutorial interaction

    DEFF Research Database (Denmark)

    Herrmann, Kim Jesper

    2014-01-01

    This study examines differences in university students’ approaches to learning when attending tutorials as well as variation in students’ perceptions of tutorials as an educational arena. In-depth qualitative analysis of semi-structured interviews with undergraduates showed how surface and deep...... approaches to learning were revealed in the students’ note-taking, listening, and engaging in dialogue. It was also shown how variation in the students’ approaches to learning were coherent with variation in the students’ perceptions of the tutors’ pedagogical role, the value of peer interaction......, and the overall purpose of tutorials. The results are discussed regarding the paradox that students relying on surface approaches to learning seemingly are the ones least likely to respond to tutorials in the way they were intended....

  9. TUTORIALS AS A STRATEGY TO STRENGTHEN THE UPPER LEVEL

    Directory of Open Access Journals (Sweden)

    Francisco Antonio Romero-Leyva

    2014-01-01

    Full Text Available In the University context tutorials are displayed as a strategy for improving the quality of higher education, therefore the Universidad de Occidente in its educational model has incorporated this program; on the basis of the above it is interesting to perform an analysis and proposal to improve the institutional program of mentoring (PIT of the U de O, El Fuerte unit. The objective of this research was an analysis of the institutional program of tutoring from the Universidad de Occidente, El Fuerte unit and propose suggestions for improvements. The deductive-inductive method was used, non-probability sampling, with a representative sample of 10% of the universe, the techniques applied the questionnaire and the interview. The sources consulted were; personal, institutional, electronic sources and documentary Among the outstanding results include that it is essential that the IES put in place tutorial systems through which students have to throughout their training with the advice and support of a teacher properly prepared, the way how they are implemented is commitment of each institution, in El Fuerte Unit is necessary training quarterly to the body of tutors, have comfortable spaces for the tutorial process, the administrative authorities require compliance with the listing because it allows the tutor to better control and management problems of their tutees, having the program strategies to rescue students who for various reasons leave the classrooms of the University; this program being a tool to comply with Tutoring System, thereby obtaining increased rates and terminal efficiency and comply graduate profile al. As tutors we need to reflect critically on our personal and professional performance when interacting with tutees, to promote change and the process of development of human potential performance.

  10. University tutorials in the setting of the European Higher Education Area: current profiles

    Directory of Open Access Journals (Sweden)

    Carolina FERNÁNDEZ-SALINERO MIGUEL

    2014-07-01

    Full Text Available In the new setting promoted by the European Higher Education Area, university guidance and tutorials have become more important than ever. We understand tutorials as part of the teaching responsibility in which a more personal interaction between professor and student, professor and novice teacher, or student and student is established, and whose goal is to guide learning according to the individual characteristics and learning styles of the individuals involved. Now is the time to set up guidance and tutorials systems for students –both during the training process and in their first professional steps– and for novice teachers also. Among such systems we can mention professor coaching, peer mentoring, professional tutoring in training centres or mentoring of an experienced university professor on the novice teacher.

  11. Professionalizing tutors and tutorials in higher education

    Directory of Open Access Journals (Sweden)

    Colunga, Silvia

    2012-01-01

    Full Text Available The paper analyzes the necessity of professionalizing training of university teachers performing tutorial activities in higher education as a response to the demands of pupils following a part-time model. Permanent training of tutor is emphasized as a way to enhance professional and personal accomplishments. This training gives priority to educative orientation and interventional actions.

  12. Information Hiding Techniques: A Tutorial Review

    CERN Document Server

    Thampi, Sabu M

    2008-01-01

    The purpose of this tutorial is to present an overview of various information hiding techniques. A brief history of steganography is provided along with techniques that were used to hide information. Text, image and audio based information hiding techniques are discussed. This paper also provides a basic introduction to digital watermarking.

  13. Migrant Education Tutorial Aide Training Manual.

    Science.gov (United States)

    California State Dept. of Education, Sacramento. Bureau of Community Services and Migrant Education.

    Designed by California's Region II Office of Migrant Education to aid in training teacher aides working with migrant children, this manual outlines activities used in teaching by the aides. Each activity is described in terms of the concept to be taught, the tutorial skill required, standard instructional media, rationale for the media, expected…

  14. Action perception and imitation : a tutorial

    NARCIS (Netherlands)

    Bekkering, H; Wohlschlager, A; Prinz, W; Hommel, B

    2002-01-01

    Currently, imitation, or performing an act after perceiving it, is in the focus of attention of researchers from many different disciplines. Although this tutorial attempts to provide some interdisciplinary background, it will concentrate on possible cognitive mechanisms that underlie imitation perf

  15. Screencast Tutorials Enhance Student Learning of Statistics

    Science.gov (United States)

    Lloyd, Steven A.; Robertson, Chuck L.

    2012-01-01

    Although the use of computer-assisted instruction has rapidly increased, there is little empirical research evaluating these technologies, specifically within the context of teaching statistics. The authors assessed the effect of screencast tutorials on learning outcomes, including statistical knowledge, application, and interpretation. Students…

  16. Audi-Tutorial Instruction in Basic Business

    Science.gov (United States)

    Brown, Richard D.

    1974-01-01

    Results of a study in which audio-tutorial instruction was compared to illustrated lecture instruction are reported. No great differences in achievement levels in the two strategies of instruction were found. The development of such an alternative teaching strategy forces better teacher organization, leading to improvement of the illustrated…

  17. Audi-Tutorial Instruction in Basic Business

    Science.gov (United States)

    Brown, Richard D.

    1974-01-01

    Results of a study in which audio-tutorial instruction was compared to illustrated lecture instruction are reported. No great differences in achievement levels in the two strategies of instruction were found. The development of such an alternative teaching strategy forces better teacher organization, leading to improvement of the illustrated…

  18. Statistical Analysis of Random Simulations : Bootstrap Tutorial

    NARCIS (Netherlands)

    Deflandre, D.; Kleijnen, J.P.C.

    2002-01-01

    The bootstrap is a simple but versatile technique for the statistical analysis of random simulations.This tutorial explains the basics of that technique, and applies it to the well-known M/M/1 queuing simulation.In that numerical example, different responses are studied.For some responses, bootstrap

  19. Relevant Research on Audio-Tutorial Methods

    Science.gov (United States)

    Novak, Joseph D.

    1970-01-01

    Reviews two aspects of research related to audio-tutorial instructional methods. First, the learning theory of David P. Ausebel is summarized and applied to instructional procedures. Secondly, learning time for attainment of concept and knowledge levels is discussed. Concludes that studies are needed on designs based on Ausebel's theory,…

  20. Selective CO Methanation Catalysts for Fuel Processing Applications

    Energy Technology Data Exchange (ETDEWEB)

    Dagle, Robert A.; Wang, Yong; Xia, Guanguang G.; Strohm, James J.; Holladay, Jamie D.; Palo, Daniel R.

    2007-07-15

    Abstract Selective CO methanation as a strategy for CO removal in micro fuel processing applications was investigated over Ru-based catalysts. Ru loading, pretreatment and reduction conditions, and choice of support were shown to affect catalyst activity, selectivity, and stability. Even operating at a gas-hourly-space-velocity as high as 13,500 hr-1, a 3%Ru/Al2O3 catalyst was able to lower CO in a reformate to less than 100 ppm over a wide temperature range from 240oC to 285 oC, while keeping hydrogen consumption below 10%.

  1. The perfect photo book: hints for the image selection process

    Science.gov (United States)

    Fageth, Reiner; Schmidt-Sacht, Wulf

    2007-01-01

    An ever increasing amount of digital images are being captured. This increase is due to several reasons. People are afraid of not "capturing the moment" and pressing the shutter is not directly liked to costs as was the case with silver halide photography. This behaviour seems to be convenient but can result in a dilemma for the consumer. This paper presents tools designed to help the consumer overcome the time consuming image selection process while turning the chore of selecting the images for prints or placing them automatically into a photo book into a fun experience.

  2. Amorphous solid dispersions: Rational selection of a manufacturing process.

    Science.gov (United States)

    Vasconcelos, Teófilo; Marques, Sara; das Neves, José; Sarmento, Bruno

    2016-05-01

    Amorphous products and particularly amorphous solid dispersions are currently one of the most exciting areas in the pharmaceutical field. This approach presents huge potential and advantageous features concerning the overall improvement of drug bioavailability. Currently, different manufacturing processes are being developed to produce amorphous solid dispersions with suitable robustness and reproducibility, ranging from solvent evaporation to melting processes. In the present paper, laboratorial and industrial scale processes were reviewed, and guidelines for a rationale selection of manufacturing processes were proposed. This would ensure an adequate development (laboratorial scale) and production according to the good manufacturing practices (GMP) (industrial scale) of amorphous solid dispersions, with further implications on the process validations and drug development pipeline. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. Evaluation of the selective detachment process in flotation froth

    Energy Technology Data Exchange (ETDEWEB)

    Honaker, R.Q.; Ozsever, A.V. [University of Kentucky, Lexington, KY (United States). Dept. for Mining Engineering

    2003-10-01

    The improved selectivity between particles of varying degrees of hydrophobicity in flotation froths has been well documented in literature, especially in the deep froths utilized in flotation columns. The phenomenon is believed to be due to the selective detachment process whereby the least hydrophobic particles are released from the bubble surface upon bubble coalescence. To quantify the selective detachment process, column flotation experiments were performed under various operating conditions that provided varying amounts of reflux between the froth and collection zones. The flotation column incorporated the ability to provide instantaneous stoppage of the process streams and separation between the collection and froth zones after ensuring steady-state operation of the column. The samples collected from the two zones and process streams were evaluated to quantify the flotation rate distribution of the particles comprising each sample. The flotation rate was used as an indicator of the degree of hydrophobicity and thus a relative measure of the binding force between the particle and bubble in the froth zone. The flotation rate data was used as input into well known flotation models to obtain the froth zone recovery rate and the quantity of material that refluxes between the collection and froth zones.

  4. Selective CO methanation catalysts for fuel processing applications

    Energy Technology Data Exchange (ETDEWEB)

    Dagle, Robert A.; Wang, Yong; Xia, Guan-Guang; Strohm, James J.; Holladay, Jamelyn [Pacific Northwest National Laboratory, 902 Battle Boulevard, P.O. Box 999, Richland, WA 99352 (United States); Palo, Daniel R. [Pacific Northwest National Laboratory, 902 Battle Boulevard, P.O. Box 999, Richland, WA 99352 (United States); Microproducts Breakthrough Institute, P.O. Box 2330, Corvallis, OR 97339 (United States)

    2007-07-15

    Selective CO methanation as a strategy for CO removal in fuel processing applications was investigated over Ru-based catalysts. Ru metal loading and crystallite size were shown to affect catalyst activity and selectivity. Even operating at a gas-hourly-space-velocity as high as 13,500 h{sup -1}, a 3% Ru/Al{sub 2}O{sub 3} catalyst with a 34.2 nm crystallite was shown to be capable of reducing CO in a reformate to less than 100 ppm over a wide temperature range from 240 to 280 C, while keeping hydrogen consumption below 10%. We present the effects of metal loading, preparation method, and crystallite size on performance for Ru-based catalysts in the selective methanation of CO in the presence of H{sub 2} and CO{sub 2}. (author)

  5. Thin film processes II

    CERN Document Server

    Kern, Werner

    1991-01-01

    This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.Key Features* Provides an all-new sequel to the 1978 classic, Thin Film Processes* Introduces new topics, and sever

  6. Selection processes in a citrus hybrid population using RAPD markers

    Directory of Open Access Journals (Sweden)

    Oliveira Roberto Pedroso de

    2003-01-01

    Full Text Available The objective of this work was to evaluate the processes of selection in a citrus hybrid population using segregation analysis of RAPD markers. The segregation of 123 RAPD markers between 'Cravo' mandarin (Citrus reticulata Blanco and 'Pêra' sweet orange (C. sinensis (L. Osbeck was analysed in a F1 progeny of 94 hybrids. Genetic composition, diversity, heterozygosity, differences in chromosomal structure and the presence of deleterious recessive genes are discussed based on the segregation ratios obtained. A high percentage of markers had a skeweness of the 1:1 expected segregation ratio in the F1 population. Many markers showed a 3:1 segregation ratio in both varieties and 1:3 in 'Pêra' sweet orange, probably due to directional selection processes. The distribution analysis of the frequencies of the segregant markers in a hybrid population is a simple method which allows a better understanding of the genetics of citrus group.

  7. Laser Process for Selective Emitter Silicon Solar Cells

    Directory of Open Access Journals (Sweden)

    G. Poulain

    2012-01-01

    Full Text Available Selective emitter solar cells can provide a significant increase in conversion efficiency. However current approaches need many technological steps and alignment procedures. This paper reports on a preliminary attempt to reduce the number of processing steps and therefore the cost of selective emitter cells. In the developed procedure, a phosphorous glass covered with silicon nitride acts as the doping source. A laser is used to open locally the antireflection coating and at the same time achieve local phosphorus diffusion. In this process the standard chemical etching of the phosphorous glass is avoided. Sheet resistance variation from 100 Ω/sq to 40 Ω/sq is demonstrated with a nanosecond UV laser. Numerical simulation of the laser-matter interaction is discussed to understand the dopant diffusion efficiency. Preliminary solar cells results show a 0.5% improvement compared with a homogeneous emitter structure.

  8. Investigating Learning with an Interactive Tutorial: A Mixed-Methods Strategy

    Science.gov (United States)

    de Villiers, M. R.; Becker, Daphne

    2017-01-01

    From the perspective of parallel mixed-methods research, this paper describes interactivity research that employed usability-testing technology to analyse cognitive learning processes; personal learning styles and times; and errors-and-recovery of learners using an interactive e-learning tutorial called "Relations." "Relations"…

  9. Web Tutorials on Systems Thinking Using the Driver-Pressure-State-Impact-Response (DPSIR) Framework

    Science.gov (United States)

    This set of tutorials provides an overview of incorporating systems thinking into decision-making, an introduction to the DPSIR framework as one approach that can assist in the decision analysis process, and an overview of DPSIR tools, including concept mapping and keyword lists,...

  10. Ancilla-less selective and efficient quantum process tomography

    CERN Document Server

    Schmiegelow, Christian Tomás; Larotonda, Miguel Antonio; Paz, Juan Pablo

    2011-01-01

    Several methods, known as Quantum Process Tomography, are available to characterize the evolution of quantum systems, a task of crucial importance. However, their complexity dramatically increases with the size of the system. Here we present the theory describing a new type of method for quantum process tomography. We describe an algorithm that can be used to selectively estimate any parameter characterizing a quantum process. Unlike any of its predecessors this new quantum tomographer combines two main virtues: it requires investing a number of physical resources scaling polynomially with the number of qubits and at the same time it does not require any ancillary resources. We present the results of the first photonic implementation of this quantum device, characterizing quantum processes affecting two qubits encoded in heralded single photons. Even for this small system our method displays clear advantages over the other existing ones.

  11. SELECTION AND PROMOTION PROCESS TO SUPERVISORY POSITIONS IN MEXICO, 2015

    Directory of Open Access Journals (Sweden)

    José Guadalupe Hernández López

    2015-12-01

    Full Text Available In Mexico it is starting a process of selection and promotion of teachers to supervisory positions through what has been called competitive examinations. This competition, derived from the Education Reform 2013, is justified by the alleged finding the best teachers to fill them. As a "new" process in the Mexican education system has led to a series of disputes since that examination was confined to the application and resolution of a standardized test consisting of multiple-choice questions applied in a session of eight hours which it determines whether a teacher is qualified or not qualified for the job.

  12. Selective blockade of microRNA processing by Lin-28

    OpenAIRE

    Viswanathan, Srinivas R.; Daley, George Q.; Gregory, Richard I.

    2008-01-01

    MicroRNAs (miRNAs) play critical roles in development, and dysregulation of miRNA expression has been observed in human malignancies. Recent evidence suggests that the processing of several primary miRNA transcripts (pri-miRNAs) is blocked post-transcriptionally in embryonic stem (ES) cells, embryonal carcinoma (EC) cells, and primary tumors. Here we show that Lin-28, a developmentally regulated RNA-binding protein, selectively blocks the processing of pri-let-7 miRNAs in embryonic cells. Usi...

  13. A MODEL SELECTION PROCEDURE IN MIXTURE-PROCESS EXPERIMENTS FOR INDUSTRIAL PROCESS OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    Márcio Nascimento de Souza Leão

    2015-08-01

    Full Text Available We present a model selection procedure for use in Mixture and Mixture-Process Experiments. Certain combinations of restrictions on the proportions of the mixture components can result in a very constrained experimental region. This results in collinearity among the covariates of the model, which can make it difficult to fit the model using the traditional method based on the significance of the coefficients. For this reason, a model selection methodology based on information criteria will be proposed for process optimization. Two examples are presented to illustrate this model selection procedure.

  14. Predictive Active Set Selection Methods for Gaussian Processes

    DEFF Research Database (Denmark)

    Henao, Ricardo; Winther, Ole

    2012-01-01

    We propose an active set selection framework for Gaussian process classification for cases when the dataset is large enough to render its inference prohibitive. Our scheme consists of a two step alternating procedure of active set update rules and hyperparameter optimization based upon marginal...... likelihood maximization. The active set update rules rely on the ability of the predictive distributions of a Gaussian process classifier to estimate the relative contribution of a datapoint when being either included or removed from the model. This means that we can use it to include points with potentially...... high impact to the classifier decision process while removing those that are less relevant. We introduce two active set rules based on different criteria, the first one prefers a model with interpretable active set parameters whereas the second puts computational complexity first, thus a model...

  15. The signal selection and processing method for polarization measurement radar

    Institute of Scientific and Technical Information of China (English)

    CHANG YuLiang; WANG XueSong; LI YongZhen; XIAO ShunPing

    2009-01-01

    Based on the ambiguity function, a novel signal processing method for the polarization measurement radar is developed. One advantage of this method is that the two orthogonal polarized signals do not have to be perpendicular to each other, which is required by traditional methods. The error due to the correlation of the two transmitting signals in the traditional method, can be reduced by this new approach. A concept called ambiguity function matrix (AFM) is introduced based on this method. AFM is a promising tool for the signal selection and design in the polarization scattering matrix measurement. The waveforms of the polarimetric radar are categorized and analyzed based on AFM in this paper. The signal processing flow of this method is explained. And the polarization scattering matrix measurement performance is testified by simulation. Furthermore, this signal processing method can be used in the inter-pulse interval measurement technique as well as in the instantaneous measurement technique.

  16. Optimization of post combustion carbon capture process-solvent selection

    Directory of Open Access Journals (Sweden)

    Udara S. P. R. Arachchige, Muhammad Mohsin, Morten C. Melaaen

    2012-01-01

    Full Text Available The reduction of the main energy requirements in the CO2 capture process that is re-boiler duty in stripper section is important. Present study was focused on selection of better solvent concentration and CO2 lean loading for CO2 capture process. Both coal and gas fired power plant flue gases were considered to develop the capture plant with different efficiencies. Solvent concentration was varied from 25 to 40 (w/w % and CO2 lean loading was varied from 0.15 to 0.30 (mol CO2/mol MEA for 70-95 (mol % CO2 removal efficiencies. The optimum specifications for coal and gas processes such as MEA concentration, CO2 lean loading, and solvent inlet flow rate were obtained.

  17. A tutorial on time-evolving dynamical Bayesian inference

    Science.gov (United States)

    Stankovski, Tomislav; Duggento, Andrea; McClintock, Peter V. E.; Stefanovska, Aneta

    2014-12-01

    In view of the current availability and variety of measured data, there is an increasing demand for powerful signal processing tools that can cope successfully with the associated problems that often arise when data are being analysed. In practice many of the data-generating systems are not only time-variable, but also influenced by neighbouring systems and subject to random fluctuations (noise) from their environments. To encompass problems of this kind, we present a tutorial about the dynamical Bayesian inference of time-evolving coupled systems in the presence of noise. It includes the necessary theoretical description and the algorithms for its implementation. For general programming purposes, a pseudocode description is also given. Examples based on coupled phase and limit-cycle oscillators illustrate the salient features of phase dynamics inference. State domain inference is illustrated with an example of coupled chaotic oscillators. The applicability of the latter example to secure communications based on the modulation of coupling functions is outlined. MatLab codes for implementation of the method, as well as for the explicit examples, accompany the tutorial.

  18. Tutorials in endovascular neurosurgery and interventional neuroradiology

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, James Vincent [Univ. of Oxford, Oxford (United Kingdom). Dept. of Neuroradiology

    2012-07-01

    This book aims to provide the trainee and practicing minimally invasive neurological therapist with a comprehensive understanding of the background science and theory that forms the foundation of their work. The contents are based on the tutorial teaching techniques used at the University of Oxford and are authored by the MSc Course Director. The tutorial is a learning episode focussed on a particular topic and intended to guide the student/reader through the background literature, to highlight the research on which standard practices are based and to provide the insights of an experienced practitioner. Each chapter of the book covers a different topic to build a complete review of the subspecialty, with in-depth discussion of all currently used techniques. The literature is reviewed and presented in context to illustrate its importance to the practice of this rapidly expanding field of medical treatment.

  19. "Accelerators and beams," a multimedia tutorial

    Science.gov (United States)

    Silbar, Richard R.

    1997-02-01

    We are developing a computer-based tutorial for charged-particle beam optics under a grant from the DOE. This subject is important to the DOE not only for its use in providing basic research tools but because the physics is the underpinning for accelerators used in industry and medicine. The tutorial, which will be delivered on Macintosh and Windows platforms, uses multimedia techniques to enhance the student's rate of learning and length of retention of the material. As such, it integrates our interactive On-Screen Laboratories™ with hypertext, line drawings, photographs, animation, video, and sound. We are targeting an audience from technicians to graduate students in science and engineering. At this time we have about a fourth of the material (about equivalent to a one-semester three-credit-hour upper under-graduate physics course) available in prototype form.

  20. A Hypertext tutorial for teaching cephalometrics.

    Science.gov (United States)

    Clark, R D; Weekrakone, S; Rock, W P

    1997-11-01

    Hypertext is a non-linear method of text presentation. It necessitates the use of a computer to store data as a series of nodes that can be called up in any desired sequence and, as such, is a new form of discovery-based learning. This paper describes a Hypertext tutorial in cephalometrics and its subsequent testing on first-year clinical dental students. Students were divided into two groups: the first received a conventional lecture; the second used the Hypertext tutorial. Testing was by means of conventional multiple choice questions. The results showed that there was no statistically significant difference between the two groups, although the computer tutor was shown more consistently to improve the knowledge of the students than did the conventional lecture. Most students who used the computer program found it enjoyable, but time consuming; less than half found it easy to follow.

  1. MacSelfService online tutorial

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Mac Self-Service is a functionality within the Mac Desktop Service built and maintained to empower CERN users by giving them easy access to applications and configurations through the Self-Service application. This tutorial (text attached to the event page) explains how to install Mac Self-Service and how to use it to install applications and printers. Content owner: Vincent Nicolas Bippus Presenter: Pedro Augusto de Freitas Batista Tell us what you think via e-learning.support at cern.ch More tutorials in the e-learning collection of the CERN Document Server (CDS) https://cds.cern.ch/collection/E-learning%20modules?ln=en All info about the CERN rapid e-learning project is linked from http://twiki.cern.ch/ELearning  

  2. Race, Self-Selection, and the Job Search Process1

    Science.gov (United States)

    Pager, Devah; Pedulla, David S.

    2015-01-01

    While existing research has documented persistent barriers facing African American job seekers, far less research has questioned how job seekers respond to this reality. Do minorities self-select into particular segments of the labor market to avoid discrimination? Such questions have remained unanswered due to the lack of data available on the positions to which job seekers apply. Drawing on two original datasets with application-specific information, we find little evidence that blacks target or avoid particular job types. Rather, blacks cast a wider net in their search than similarly situated whites, including a greater range of occupational categories and characteristics in their pool of job applications. Finally, we show that perceptions of discrimination are associated with increased search breadth, suggesting that broad search among African Americans represents an adaptation to labor market discrimination. Together these findings provide novel evidence on the role of race and self-selection in the job search process. PMID:26046224

  3. Race, self-selection, and the job search process.

    Science.gov (United States)

    Pager, Devah; Pedulla, David S

    2015-01-01

    While existing research has documented persistent barriers facing African-American job seekers, far less research has questioned how job seekers respond to this reality. Do minorities self-select into particular segments of the labor market to avoid discrimination? Such questions have remained unanswered due to the lack of data available on the positions to which job seekers apply. Drawing on two original data sets with application-specific information, we find little evidence that blacks target or avoid particular job types. Rather, blacks cast a wider net in their search than similarly situated whites, including a greater range of occupational categories and characteristics in their pool of job applications. Additionally, we show that perceptions of discrimination are associated with increased search breadth, suggesting that broad search among African-Americans represents an adaptation to labor market discrimination. Together these findings provide novel evidence on the role of race and self-selection in the job search process.

  4. PASS-GP: Predictive active set selection for Gaussian processes

    DEFF Research Database (Denmark)

    Henao, Ricardo; Winther, Ole

    2010-01-01

    to the active set selection strategy and marginal likelihood optimization on the active set. We make extensive tests on the USPS and MNIST digit classification databases with and without incorporating invariances, demonstrating that we can get state-of-the-art results (e.g.0.86% error on MNIST) with reasonable......We propose a new approximation method for Gaussian process (GP) learning for large data sets that combines inline active set selection with hyperparameter optimization. The predictive probability of the label is used for ranking the data points. We use the leave-one-out predictive probability...... available in GPs to make a common ranking for both active and inactive points, allowing points to be removed again from the active set. This is important for keeping the complexity down and at the same time focusing on points close to the decision boundary. We lend both theoretical and empirical support...

  5. Selective target processing: perceptual load or distractor salience?

    Science.gov (United States)

    Eltiti, Stacy; Wallace, Denise; Fox, Elaine

    2005-07-01

    Perceptual load theory (Lavie, 1995) states that participants cannot engage in focused attention when shown displays containing a low perceptual load, because attentional resources are not exhausted, whereas in high-load displays attention is always focused, because attentional resources are exhausted. An alternative "salience" hypothesis holds that the salience of distractors and not perceptual load per se determines selective attention. Three experiments were conducted to investigate the influence that target and distractor onsets and offsets have on selective processing in a standard interference task. Perceptual load theory predicts that, regardless of target or distractor presentation (onset or offset), interference from ignored distractors should occur in low-load displays only. In contrast, the salience hypothesis predicts that interference should occur when the distractor appears as an onset and would occur for distractor offsets only when the target was also an offset. Interference may even occur in highload displays if the distractor is more salient. The results supported the salience hypothesis.

  6. ReSTful OSGi Web Applications Tutorial

    Science.gov (United States)

    Shams, Khawaja; Norris, Jeff

    2008-01-01

    This slide presentation accompanies a tutorial on the ReSTful (Representational State Transfer) web application. Using Open Services Gateway Initiative (OSGi), ReST uses HTTP protocol to enable developers to offer services to a diverse variety of clients: from shell scripts to sophisticated Java application suites. It also uses Eclipse for the rapid development, the Eclipse debugger, the test application, and the ease of export to production servers.

  7. ESE 631 ASH COURSE Tutorial/UOPHELP

    OpenAIRE

    sdzfghj

    2015-01-01

    For more course tutorials visit www.uophelp.com   ESE 631 Complete Class, New Syllabus Business - General Business LRE and FAPE. Please read the article “Least Restrictive Environment: How Do We Prepare Both Our Special Educators and Our General Educators to Comply with the Provision?” (Keuhne, 1998). According to IDEA, what do the terms Least Restrictive Environment (LRE) and Free and Appropriate Public Education (FAPE) mean? How does inclusion fi...

  8. Interactive learning tutorials on quantum mechanics

    CERN Document Server

    Singh, Chandralekha

    2016-01-01

    We discuss the development and evaluation of quantum interactive learning tutorials (QuILTs) which are suitable for undergraduate courses in quantum mechanics. QuILTs are based on the investigation of student difficulties in learning quantum physics. They exploit computer-based visualization tools and help students build links between the formal and conceptual aspects of quantum physics without compromising the technical content. They can be used both as supplements to lectures or as a self-study tool.

  9. Thermophysics Universal Research Framework (TURF) Tutorial Package

    Science.gov (United States)

    2017-03-02

    DATES COVERED (From - To) 4. TITLE AND SUBTITLE Thermophysics Universal Research Framework (TURF) Tutorial Package 5a. CONTRACT NUMBER In...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 THERMOPHYSICS UNIVERSAL RESEARCH FRAMEWORK – INFRASTRUCTURE RELEASE – (TURF-IR V1.0...a C-R physics module), there are no hooks to indicate that a particular module is missing. In this way, reverse engineering the functionality of a

  10. abs417ashcoursesTutorial /uophelp

    OpenAIRE

    smith

    2015-01-01

    For more course tutorials visit www.uophelp.com     ABS 417 Week 1 DQ 1 ( The Power of Many )    ABS 417 Week 1 DQ 2 ( Social Change Model )    ABS 417 Week 2 DQ 1 ( Empowerment, Disempowerment and Social Change )   ABS 417 Week 2 DQ 2 ( Non-Profit vs. For-Profit Organizations )    ABS 417 Week 2 Assignment ( Reflection Paper )    ABS 417 Week 3 DQ 1 ( Social Problems )  &nb...

  11. ACC 220 Tutorials / acc220dotcom

    OpenAIRE

    modumteja

    2015-01-01

    For more course tutorials visit www.acc220.com   ACC 220 Week 1 Checkpoint Career Opportunities ACC 220 Week 1 DQ 1 & DQ 2 ACC 220 Week 2 Checkpoint Proprietorships, Partnerships, and Corporations ACC 220 Week 2 Assignment Financial Statements ACC 220 Week 3 Checkpoint Classified Balance Sheets ACC 220 Week 3 DQ 1 and DQ 2 ACC 220 Week 4 Checkpoint Cash Management Matrix Appendix B ACC 220 Week 4 Assignment Internal Cash Control ACC 220 Wee...

  12. EDU 626 ASH COURSE Tutorial/UOPHELP

    OpenAIRE

    dsftr

    2015-01-01

    For more course tutorials visit www.uophelp.com   EDU 626 Complete Class, New Coursework Business - General Business Week 1 Brainstorm. Brainstorm potential educational research topics that are of interest to you. What is a topic that will motivate you to want to explore it further? Try to focus in as much as possible. For example, if you are interested in education for gifted children, you may want to focus on the advantages/disadvantages of homogeneous grouping ...

  13. The Development of e-tutorial on Implementation National Curriculum 2013 for Mathematics Teacher

    Science.gov (United States)

    Roza, Yenita; Satria, Gita; Nur Siregar, Syarifah

    2017-06-01

    Curriculum 2013 is the new national Curriculum in Indonesia that is targeted to be used in all Indonesian schools in 2019. At this time the teacher training continues but the number and locations of teachers very diffuse and time constraints to be an obstacle for the government to be able to conduct training for teachers. This research resulted in the e-tutorial which is designed for mathematics teachers in studying the process of Curriculum implementation. This product will assist the government in accelerating the preparation of teachers in implementation of Curriculum 2013. This e-tutorial contains the dynamics of Curriculum development, learning model, learning assessment, lesson plan, curriculum stages of implementation and government regulation that is relevant to the implementation of Curriculum 2013. The product development started with a needs analysis through discussions with mathematics teachers about their difficulties in the implementation of the Curriculum 2013. This e-tutorial was developed using Application of Adobe Director 11. This paper discusses the results of need analysis, process development and results of product revisions made based on input from teachers during the FGD. From the discussion, it can be concluded that this e-tutorial easily understood by teachers and help them to understand the implementation of Curriculum 2013

  14. SELECTION AND PRELIMINARY EVALUATION OF ALTERNATIVE REDUCTANTS FOR SRAT PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    Stone, M.; Pickenheim, B.; Peeler, D.

    2009-06-30

    Defense Waste Processing Facility - Engineering (DWPF-E) has requested the Savannah River National Laboratory (SRNL) to perform scoping evaluations of alternative flowsheets with the primary focus on alternatives to formic acid during Chemical Process Cell (CPC) processing. The reductants shown below were selected for testing during the evaluation of alternative reductants for Sludge Receipt and Adjustment Tank (SRAT) processing. The reductants fall into two general categories: reducing acids and non-acidic reducing agents. Reducing acids were selected as direct replacements for formic acid to reduce mercury in the SRAT, to acidify the sludge, and to balance the melter REDuction/OXidation potential (REDOX). Non-acidic reductants were selected as melter reductants and would not be able to reduce mercury in the SRAT. Sugar was not tested during this scoping evaluation as previous work has already been conducted on the use of sugar with DWPF feeds. Based on the testing performed, the only viable short-term path to mitigating hydrogen generation in the CPC is replacement of formic acid with a mixture of glycolic and formic acids. An experiment using glycolic acid blended with formic on an 80:20 molar basis was able to reduce mercury, while also targeting a predicted REDuction/OXidation (REDOX) of 0.2 expressed as Fe{sup 2+}/{Sigma}Fe. Based on this result, SRNL recommends performing a complete CPC demonstration of the glycolic/formic acid flowsheet followed by a design basis development and documentation. Of the options tested recently and in the past, nitric/glycolic/formic blended acids has the potential for near term implementation in the existing CPC equipment providing rapid throughput improvement. Use of a non-acidic reductant is recommended only if the processing constraints to remove mercury and acidify the sludge acidification are eliminated. The non-acidic reductants (e.g. sugar) will not reduce mercury during CPC processing and sludge acidification would

  15. Temporally selective processing of communication signals by auditory midbrain neurons

    DEFF Research Database (Denmark)

    Elliott, Taffeta M; Christensen-Dalsgaard, Jakob; Kelley, Darcy B

    2011-01-01

    of auditory neurons in the laminar nucleus of the torus semicircularis (TS) of X. laevis specializes in encoding vocalization click rates. We recorded single TS units while pure tones, natural calls, and synthetic clicks were presented directly to the tympanum via a vibration-stimulation probe. Synthesized...... click rates ranged from 4 to 50 Hz, the rate at which the clicks begin to overlap. Frequency selectivity and temporal processing were characterized using response-intensity curves, temporal-discharge patterns, and autocorrelations of reduplicated responses to click trains. Characteristic frequencies...

  16. Pyrochemical and Dry Processing Methods Program. A selected bibliography

    Energy Technology Data Exchange (ETDEWEB)

    McDuffie, H.F.; Smith, D.H.; Owen, P.T.

    1979-03-01

    This selected bibliography with abstracts was compiled to provide information support to the Pyrochemical and Dry Processing Methods (PDPM) Program sponsored by DOE and administered by the Argonne National Laboratory. Objectives of the PDPM Program are to evaluate nonaqueous methods of reprocessing spent fuel as a route to the development of proliferation-resistant and diversion-resistant methods for widespread use in the nuclear industry. Emphasis was placed on the literature indexed in the ERDA--DOE Energy Data Base (EDB). The bibliography includes indexes to authors, subject descriptors, EDB subject categories, and titles.

  17. Board Directors' Selection Process Following a Gender Quota

    DEFF Research Database (Denmark)

    Sigurjonsson, Olaf; Arnardottir, Audur Arna

    The 2008 financial crisis in Iceland was triggered by poor governance of three of the country’s major banks and resulted in new corporate governance regulations including a 40% gender quota for the boards of all state-owned enterprises, publicly traded enterprises, and public and private limited......-quota selection of new board directors as well as the attitudes of board members towards the quota and perceptions of the effect of quota on processes. We incorporate a dual qualitative and quantitative methodology with in-depth interviews with 20 board directors and chairs, and a survey of 260 directors who...

  18. Novel roles for selected genes in meiotic DNA processing.

    Directory of Open Access Journals (Sweden)

    Philip W Jordan

    2007-12-01

    Full Text Available High-throughput studies of the 6,200 genes of Saccharomyces cerevisiae have provided valuable data resources. However, these resources require a return to experimental analysis to test predictions. An in-silico screen, mining existing interaction, expression, localization, and phenotype datasets was developed with the aim of selecting minimally characterized genes involved in meiotic DNA processing. Based on our selection procedure, 81 deletion mutants were constructed and tested for phenotypic abnormalities. Eleven (13.6% genes were identified to have novel roles in meiotic DNA processes including DNA replication, recombination, and chromosome segregation. In particular, this analysis showed that Def1, a protein that facilitates ubiquitination of RNA polymerase II as a response to DNA damage, is required for efficient synapsis between homologues and normal levels of crossover recombination during meiosis. These characteristics are shared by a group of proteins required for Zip1 loading (ZMM proteins. Additionally, Soh1/Med31, a subunit of the RNA pol II mediator complex, Bre5, a ubiquitin protease cofactor and an uncharacterized protein, Rmr1/Ygl250w, are required for normal levels of gene conversion events during meiosis. We show how existing datasets may be used to define gene sets enriched for specific roles and how these can be evaluated by experimental analysis.

  19. Layerwise Monitoring of the Selective Laser Melting Process by Thermography

    Science.gov (United States)

    Krauss, Harald; Zeugner, Thomas; Zaeh, Michael F.

    Selective Laser Melting is utilized to build parts directly from CAD data. In this study layerwise monitoring of the temperature distribution is used to gather information about the process stability and the resulting part quality. The heat distribution varies with different kinds of parameters including scan vector length, laser power, layer thickness and inter-part distance in the job layout. By integration of an off-axis mounted uncooled thermal detector, the solidification as well as the layer deposition are monitored and evaluated. This enables the identification of hot spots in an early stage during the solidification process and helps to avoid process interrupts. Potential quality indicators are derived from spatially resolved measurement data and are correlated to the resulting part properties. A model of heat dissipation is presented based on the measurement of the material response for varying heat input. Current results show the feasibility of process surveillance by thermography for a limited section of the building platform in a commercial system.

  20. Student Opinions on Factors Influencing Tutorials at Walter Sisulu University, South Africa.

    Science.gov (United States)

    Garí Calzada, Mayra A; Iputo, Jehu E

    2015-07-01

    INTRODUCTION Problem-based learning harmonized with education in and for the community is the cornerstone of the curriculum for the undergraduate medical degree at Walter Sisulu University, Mthatha, South Africa. In tutorials, students construct knowledge and learn to work collaboratively while interacting with one another in their search for solutions to a pedagogically modeled health issue based on a patient. Problems cover students' needs defined by the learning cycle of the second year medical curriculum, organized into four learning blocks. OBJECTIVES Determine student perspectives on which factors affect tutorial group functioning and detect the reported presence of these factors in the four learning blocks comprising the second year of medical studies at Walter Sisulu University. METHODS Twenty second-year medical students were chosen by stratified random sampling and assigned to two focus groups. One group discussed factors that foster smooth functioning of the tutorial group; the other focused on factors hindering effective group work. Later, in a joint session, 17 items previously identified by both groups were selected and included in a survey given to all 97 students at the end of second year. The survey assessed presence of each item in 0, 1, 2, 3 or 4 of the learning blocks. RESULTS Survey response was 93.8%. Mean reported presence of factors that influenced tutorials in the four learning blocks was 2.71 (SD 0.31) for the social dimension, 3.02 for motivational (SD 0.02), 3.00 for cognitive (SD 0.42), and 2.22 for self-directed learning (SD 0.79). CONCLUSIONS Tutorial group performance at Walter Sisulu University is positively influenced more by motivational and cognitive factors than by social and self-directed learning factors. Social dimensions should be prioritized when training tutors and self-directed learning stressed for students. The poor productivity of extra-tutorial group discussions suggests the need for a critical evaluation of this

  1. The "magic" of tutorial centres in Hong Kong: An analysis of media marketing and pedagogy in a tutorial centre

    Science.gov (United States)

    Koh, Aaron

    2014-12-01

    Why do more than three-quarters of Hong Kong's senior secondary students flock to tutorial centres like moths to light? What is the "magic" that is driving the popularity of the tutorial centre enterprise? Indeed, looking at the ongoing boom of tutorial centres in Hong Kong (there are almost 1,000 of them), it is difficult not to ask these questions. This paper examines the phenomenon of tutorial centres in Hong Kong and seeks to understand what draws students to these centres. Combining theories of marketing semiotics and emotion studies, the author investigates the pivotal role of media marketing in generating the "magic" of tutorial centres, whose advertising strategy includes, for example, a display of billboard posters featuring stylishly-dressed "celebrity teachers". The author reviews some of the literature available on the subject of tutorial centres. In a case study approach, he then maps out the pedagogy he observed in an English tutorial class, seeking heuristic insights into the kind of teaching students in the study were looking for. He argues that part of the "magical" attraction of what are essentially "cram schools" is their formulaic pedagogy of teaching and reinforcing exam skills. Finally, the paper considers the social implications of the tutorial centre industry in terms of media marketing of education and unequal access to tutorial services.

  2. Nanoemulsion: process selection and application in cosmetics--a review.

    Science.gov (United States)

    Yukuyama, M N; Ghisleni, D D M; Pinto, T J A; Bou-Chacra, N A

    2016-02-01

    In recent decades, considerable and continuous growth in consumer demand in the cosmetics field has spurred the development of sophisticated formulations, aiming at high performance, attractive appearance, sensorial benefit and safety. Yet despite increasing demand from consumers, the formulator faces certain restrictions regarding the optimum equilibrium between the active compound concentration and the formulation base taking into account the nature of the skin structure, mainly concerning to the ideal penetration of the active compound, due to the natural skin barrier. Emulsion is a mixture of two immiscible phases, and the interest in nanoscale emulsion has been growing considerably in recent decades due to its specific attributes such as high stability, attractive appearance and drug delivery properties; therefore, performance is expected to improve using a lipid-based nanocarrier. Nanoemulsions are generated by different approaches: the so-called high-energy and low-energy methods. The global overview of these mechanisms and different alternatives for each method are presented in this paper, along with their benefits and drawbacks. As a cosmetics formulation is reflected in product delivery to consumers, nanoemulsion development with prospects for large-scale production is one of the key attributes in the method selection process. Thus, the aim of this review was to highlight the main high- and low-energy methods applicable in cosmetics and dermatological product development, their specificities, recent research on these methods in the cosmetics and consideration for the process selection optimization. The specific process with regard to inorganic nanoparticles, polymer nanoparticles and nanocapsule formulation is not considered in this paper.

  3. A COMPARATIVE STUDY OF TEAM-BASED LEARNING ON THE TRADITIONAL METHOD OF CONDUCTING TUTORIALS IN PHYSIOLOGY FOR FIRST YEAR MBBS STUDENTS

    Directory of Open Access Journals (Sweden)

    Ashwini Vishweshwar Amalladinna

    2017-05-01

    Full Text Available BACKGROUND In medical education, didactic lectures, tutorials, bedside clinics, etc. are some of the teaching-learning method incorporated in the curriculum. Most of the methods are teacher oriented where students are not involved much. Active participation of the students, i.e. student centered approach increases the understanding of the subject. In physiology, the tutorials are conducted to discuss the individual topics. It was observed that active participation of students in physiology tutorials is less. This study was undertaken to actively involve the students during tutorials and to assess their understanding by Team-Based Learning (TBL. MATERIALS AND METHODS In this study, the performance of the students in team-based learning was compared with the traditional learning. The pretest and post-test was conducted at the beginning and at the end of the tutorial in both the groups. In the study group, the tutorial topics were discussed in teams, whereas in control group, the tutorial was conducted by traditional method. RESULTS There was a significant increase in performance in post-test in study group compared to control group (p <0.001. TBL sessions will be more interesting and interacting compared to traditional method. TBL method improves the student’s understanding of the topics in detail and hence enhances the performance. CONCLUSION The different teaching-learning methods, which increase the student’s involvement should be implemented in the medical education to facilitate the learning process.

  4. Selecting a Control Strategy for Plug and Process Loads

    Energy Technology Data Exchange (ETDEWEB)

    Lobato, C.; Sheppy, M.; Brackney, L.; Pless, S.; Torcellini, P.

    2012-09-01

    Plug and Process Loads (PPLs) are building loads that are not related to general lighting, heating, ventilation, cooling, and water heating, and typically do not provide comfort to the building occupants. PPLs in commercial buildings account for almost 5% of U.S. primary energy consumption. On an individual building level, they account for approximately 25% of the total electrical load in a minimally code-compliant commercial building, and can exceed 50% in an ultra-high efficiency building such as the National Renewable Energy Laboratory's (NREL) Research Support Facility (RSF) (Lobato et al. 2010). Minimizing these loads is a primary challenge in the design and operation of an energy-efficient building. A complex array of technologies that measure and manage PPLs has emerged in the marketplace. Some fall short of manufacturer performance claims, however. NREL has been actively engaged in developing an evaluation and selection process for PPLs control, and is using this process to evaluate a range of technologies for active PPLs management that will cap RSF plug loads. Using a control strategy to match plug load use to users' required job functions is a huge untapped potential for energy savings.

  5. ExoMars 2018 Landing Site Selection Process

    Science.gov (United States)

    Vago, Jorge L.; Kminek, Gerhard; Rodionov, Daniel

    The ExoMars 2018 mission will include two science elements: a Rover and a Surface Platform. The ExoMars Rover will carry a comprehensive suite of instruments dedicated to geology and exobiology research named after Louis Pasteur. The Rover will be able to travel several kilometres searching for traces of past and present signs of life. It will do this by collecting and analysing samples from outcrops, and from the subsurface—down to 2-m depth. The very powerful combination of mobility with the ability to access locations where organic molecules can be well preserved is unique to this mission. After the Rover will have egressed, the ExoMars Surface Platform will begin its science mission to study the surface environment at the landing location. This talk will describe the landing site selection process and introduce the scientific, planetary protection, and engineering requirements that candidate landing sites must comply with in order to be considered for the mission.

  6. Selection criteria for waste management processes in manned space missions.

    Science.gov (United States)

    Doll, S; Cothran, B; McGhee, J

    1991-10-01

    Management of waste produced during manned space exploration missions will be an important function of advanced life support systems. Waste materials can be thrown away or recovered for reuse. The first approach relies totally on external supplies to replace depleted resources while the second approach regenerates resources internally. The selection of appropriate waste management processes will be based upon criteria which include mission and hardware characteristics as well as overall system considerations. Mission characteristics discussed include destination, duration, crew size, operating environment, and transportation costs. Hardware characteristics include power, mass and volume requirements as well as suitability for a given task. Overall system considerations are essential to assure optimization for the entire mission rather than for an individual system. For example, a waste management system designed for a short trip to the moon will probably not be the best one for an extended mission to Mars. The purpose of this paper is to develop a methodology to identify and compare viable waste management options for selection of an appropriate waste management system.

  7. Bayesian site selection for fast Gaussian process regression

    KAUST Repository

    Pourhabib, Arash

    2014-02-05

    Gaussian Process (GP) regression is a popular method in the field of machine learning and computer experiment designs; however, its ability to handle large data sets is hindered by the computational difficulty in inverting a large covariance matrix. Likelihood approximation methods were developed as a fast GP approximation, thereby reducing the computation cost of GP regression by utilizing a much smaller set of unobserved latent variables called pseudo points. This article reports a further improvement to the likelihood approximation methods by simultaneously deciding both the number and locations of the pseudo points. The proposed approach is a Bayesian site selection method where both the number and locations of the pseudo inputs are parameters in the model, and the Bayesian model is solved using a reversible jump Markov chain Monte Carlo technique. Through a number of simulated and real data sets, it is demonstrated that with appropriate priors chosen, the Bayesian site selection method can produce a good balance between computation time and prediction accuracy: it is fast enough to handle large data sets that a full GP is unable to handle, and it improves, quite often remarkably, the prediction accuracy, compared with the existing likelihood approximations. © 2014 Taylor and Francis Group, LLC.

  8. Selection of Vendor Based on Intuitionistic Fuzzy Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Prabjot Kaur

    2014-01-01

    Full Text Available Business environment is characterized by greater domestic and international competitive position in the global market. Vendors play a key role in achieving the so-called corporate competition. It is not easy however to identify good vendors because evaluation is based on multiple criteria. In practice, for VSP most of the input information about the criteria is not known precisely. Intuitionistic fuzzy set is an extension of the classical fuzzy set theory (FST, which is a suitable way to deal with impreciseness. In other words, the application of intuitionistic fuzzy sets instead of fuzzy sets means the introduction of another degree of freedom called nonmembership function into the set description. In this paper, we proposed a triangular intuitionistic fuzzy number based approach for the vendor selection problem using analytical hierarchy process. The crisp data of the vendors is represented in the form of triangular intuitionistic fuzzy numbers. By applying AHP which involves decomposition, pairwise comparison, and deriving priorities for the various levels of the hierarchy, an overall crisp priority is obtained for ranking the best vendor. A numerical example illustrates our method. Lastly a sensitivity analysis is performed to find the most critical criterion on the basis of which vendor is selected.

  9. Supercritical boiler material selection using fuzzy analytic network process

    Directory of Open Access Journals (Sweden)

    Saikat Ranjan Maity

    2012-08-01

    Full Text Available The recent development of world is being adversely affected by the scarcity of power and energy. To survive in the next generation, it is thus necessary to explore the non-conventional energy sources and efficiently consume the available sources. For efficient exploitation of the existing energy sources, a great scope lies in the use of Rankin cycle-based thermal power plants. Today, the gross efficiency of Rankin cycle-based thermal power plants is less than 28% which has been increased up to 40% with reheating and regenerative cycles. But, it can be further improved up to 47% by using supercritical power plant technology. Supercritical power plants use supercritical boilers which are able to withstand a very high temperature (650-720˚C and pressure (22.1 MPa while producing superheated steam. The thermal efficiency of a supercritical boiler greatly depends on the material of its different components. The supercritical boiler material should possess high creep rupture strength, high thermal conductivity, low thermal expansion, high specific heat and very high temperature withstandability. This paper considers a list of seven supercritical boiler materials whose performance is evaluated based on seven pivotal criteria. Given the intricacy and difficulty of this supercritical boiler material selection problem having interactions and interdependencies between different criteria, this paper applies fuzzy analytic network process to select the most appropriate material for a supercritical boiler. Rene 41 is the best supercritical boiler material, whereas, Haynes 230 is the worst preferred choice.

  10. Tutorial for Authors and Referees

    Science.gov (United States)

    Editors from Physical Review Letters and Physical Review will provide information and tips for our less experienced referees and authors. This session is aimed at anyone looking to submit to or review for any of the APS journals, as well as anyone who would like to learn more about the authoring and refereeing processes. Topics for discussion will include advice on how to write good manuscripts, similarities and differences in writing referee reports for PRL and PR, and other ways in which authors, referees, and editors can work together productively. Following a short presentation from the editors, there will be a moderated discussion.

  11. A tutorial on testing the race model inequality

    DEFF Research Database (Denmark)

    Gondan, Matthias; Minakata, Katsumi

    2016-01-01

    , to faster responses to redundant signals. In contrast, coactivation models assume integrated processing of the combined stimuli. To distinguish between these two accounts, Miller (1982) derived the well-known race model inequality, which has become a routine test for behavioral data in experiments...... with redundant signals. In this tutorial, we review the basic properties of redundant signals experiments and current statistical procedures used to test the race model inequality during the period between 2011 and 2014. We highlight and discuss several issues concerning study design and the test of the race...... model inequality, such as inappropriate control of Type I error, insufficient statistical power, wrong treatment of omitted responses or anticipations and the interpretation of violations of the race model inequality. We make detailed recommendations on the design of redundant signals experiments...

  12. An Interactive Learning Tutorial on Quantum Key Distribution

    CERN Document Server

    DeVore, Seth

    2016-01-01

    We describe the development and evaluation of a Quantum Interactive Learning Tutorial (QuILT) on quantum key distribution, a context which involves an exciting application of quantum mechanics. The protocol used in the QuILT described here uses single photons with non-orthogonal polarization states to generate a random shared key over a public channel for encrypting and decrypting information. The QuILT helps upper-level undergraduate students learn quantum mechanics using a simple two state system. It actively engages students in the learning process and helps them build links between the formalism and the conceptual aspects of quantum physics without compromising the technical content. The evaluations suggest that the QuILT is helpful in improving students' understanding of relevant concepts.

  13. Use of IBM LinkWay for Developing Tutorials.

    Science.gov (United States)

    Nagarkatte, Umesh P.; Nagarkatte, Shailaja U.

    IBM LinkWay is an example of a hypertext and hypermedia authoring system. This paper summarizes a workshop presentation that demonstrates how to create a mathematics tutorial using LinkWay. An introduction discusses the guidelines for the tutorial. The guidelines consider the presentation of questions, help features for the students, feedback,…

  14. The SIKS/BiGGrid Big Data Tutorial

    NARCIS (Netherlands)

    Hiemstra, Djoerd; Lammerts, Evert; de Vries, A.P.

    2011-01-01

    The School for Information and Knowledge Systems SIKS and the Dutch e-science grid BiG Grid organized a new two-day tutorial on Big Data at the University of Twente on 30 November and 1 December 2011, just preceding the Dutch-Belgian Database Day. The tutorial is on top of some exciting new

  15. Developing and Testing a Video Tutorial for Software Training

    NARCIS (Netherlands)

    Meij, van der Hans

    2014-01-01

    Purpose: Video tutorials for software training are rapidly becoming popular. A set of dedicated guidelines for the construction of such tutorials was recently advanced in Technical Communication (Van der Meij & Van der Meij, 2013). The present study set out to assess the cognitive and motivational e

  16. The SIKS/BiGGrid Big Data Tutorial

    NARCIS (Netherlands)

    Hiemstra, Djoerd; Lammerts, Evert; Vries, de Arjen P.

    2011-01-01

    The School for Information and Knowledge Systems SIKS and the Dutch e-science grid BiG Grid organized a new two-day tutorial on Big Data at the University of Twente on 30 November and 1 December 2011, just preceding the Dutch-Belgian Database Day. The tutorial is on top of some exciting new developm

  17. The SIKS/BiGGrid Big Data Tutorial

    NARCIS (Netherlands)

    Hiemstra, Djoerd; Lammerts, Evert; de Vries, A.P.

    2011-01-01

    The School for Information and Knowledge Systems SIKS and the Dutch e-science grid BiG Grid organized a new two-day tutorial on Big Data at the University of Twente on 30 November and 1 December 2011, just preceding the Dutch-Belgian Database Day. The tutorial is on top of some exciting new developm

  18. Evaluating Best Practices for Video Tutorials: A Case Study

    Science.gov (United States)

    Weeks, Thomas; Putnam Davis, Jennifer

    2017-01-01

    This article will explore one library's experience creating best practices for the creation of video tutorials. First, a literature review establishes the best practices other creators have used. Then, the authors apply these best practices to the creation of their first video tutorial. Finally, they evaluate the usefulness of each practice in…

  19. SPIN Tutorial: How to Become a SPIN Doctor

    NARCIS (Netherlands)

    Ruys, T.C.; Bosnacki, D.; Leue, S.

    2002-01-01

    SPIN is a model checker for the verification of software systems. SPIN uses a high level language called PROMELA to specify systems descriptions. The goal of this tutorial is to introduce novice users to both PROMELA and SPIN. The tutorial itself is divided into two parts. The BASIC SPIN part is tar

  20. XACC 280 UOP Tutorial Course/Uoptutorial

    OpenAIRE

    anemone222

    2015-01-01

    For More Course Tutorials Visit www.uoptutorial.com             1.      Assignment: Journalizing, Posting, and Preparing a Trial Balance   ·         Complete P2-2A on p. 81 of Financial Accounting, using the templates in Appendix C for your answers. Each part of the problem corresponds to one tab in Appendix C. Complete all three tabs of Appendix C. ...

  1. SOC 120 ASH Tutorial course/ Uoptutorial

    OpenAIRE

    Michael Crichton

    2015-01-01

    For more course tutorials visit www.uoptutorial.com     SOC 120 WEEK 1 DQ 1 RELATIVISM SOC 120 WEEK 1 DQ 2 EGOISM AND ALTRUISM SOC 120 WEEK 2 DQ 1 SCHOOL PRAYER SOC 120 WEEK 2 DQ 2 RESPONSIBILITY AND REWARD SOC 120 WEEK 2 RELATIVISM AND MORALITY SOC 120 WEEK 3 DQ 1 DEATH PENALTY SOC 120 WEEK 3 DQ 2 FUTURE GENERATIONS AND DEVELOPMENT SOC 120 WEEK 3 ROUGH DRAFT OF FINAL PAPER ON ETHICS THEORY SOC 120 WEEK 4 DQ 1 PRESUMPTION OF INNOCENCE ...

  2. MGT 330 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    alfoniz

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MGT 330 Week 1 Individual Assignment Functions of Management Paper (Ash) MGT 330 Week 1 DQ 1 (Ash) MGT 330 Week 1 DQ 2 (Ash) MGT 330 Week 1 DQ 3 (Ash) MGT 330 Week 1 Summary (Ash) MGT 330 Week 2 Team Assignment External Internal Factors Paper (Ash) MGT 330 Week 2 Individual Assignment Delegation (Ash) MGT 330 Week 2 Summary (Ash) MGT 330 Week 2 DQ 1 (Ash) MGT 330 Week 2 DQ 2 (Ash) MGT 330 W...

  3. HIS 103 ASH course tutorial/tutorialoutlet

    OpenAIRE

    NARESH 1

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   HIS 103 Week 1 DQ 1 (Transition to Agriculture) (Ash) HIS 103 Week 1 DQ 2 (Early Complex Societies) (Ash) HIS 103 Week 1 Quiz (Ash) HIS 103 Week 1 Assignment (Ash) HIS 103 Week 2 Assignment Greco Roman Influence Paper (Ash) HIS 103 Week 2 DQ 1 Chinese Social and Political Order Systems (Ash) HIS 103 Week 2 DQ 2 Caste System (Ash) HIS 103 Week 2 Quiz (Ash) HIS 103 Week 3 Assignment Black Death Dra...

  4. MAT 126 ASH Course Tutorial / Tutorialoutlet

    OpenAIRE

    stylia

    2015-01-01

    For more course tutorials visit www.tutorialoutlet.com   MAT 126 Week 1 DQ 1 (Ash) MAT 126 Week 1 Quiz (Ash) MAT 126 Week 1 Written Assignment (Arithmetic and geometric sequence) (Ash) MAT 126 Week 2 DQ 1 (Ash) MAT 126 Week 2 DQ 2 (Ash) MAT 126 Week 2 Assignment Is It Fat Free (Ash) MAT 126 Week 2 Quiz (Ash) MAT 126 Week 3 DQ 1 (Ash) MAT 126 Week 3 DQ 2 (Ash) MAT 126 Week 3 Assignment Quadratic Equations (Ash) MAT 126 Week 3 Quiz (Ash) MAT 126...

  5. Sonic effervescence: A tutorial on acoustic cavitation

    Energy Technology Data Exchange (ETDEWEB)

    Apfel, R.E. [Yale University, New Haven, Connecticut 06520-8286 (United States)

    1997-03-01

    This article on acoustic cavitation is a revision of a tutorial lecture presented at the Acoustical Society of America meeting in Austin, Texas, on 28 November 1994. The general approach adopted here differs from a review article in stressing the overarching themes that come under the category of acoustic cavitation, rather than being an encyclopedic reference on the topic. When possible, specific order-of-magnitude estimates have been given so that the reader can better understand the particular phenomena being described. The basic physics is discussed, and applications are reviewed with the goal of putting them in a useful context. {copyright} {ital 1997 Acoustical Society of America.}

  6. Endnote Web tutorial for BJCVS/RBCCV

    Directory of Open Access Journals (Sweden)

    Marcos Aurélio Barboza de Oliveira

    2015-04-01

    Full Text Available AbstractAt present, many useful tools for reference management are available for use. They can be either off-line softwares or accessible Websites to all users in the internet. Their target is to facilitate the production of scientific text. But, to accomplish that, the featured bibliographic style should be effectively inserted, and the program has to be free. Here in this tutorial, we present Endnote Web®, a bibliographic reference management program comprising these two requirements: it contains the Brazilian Journal of Cardiovascular Surgery reference format and its use is free for charge after sign-in in IP registered terminal in Web of Science®.

  7. Endnote Web tutorial for BJCVS/RBCCV.

    Science.gov (United States)

    Oliveira, Marcos Aurélio Barboza de; Santos, Carlos Alberto dos; Brandi, Antônio Carlos; Botelho, Paulo Henrique Husseini; Sciarra, Adília Maria Pires; Braile, Domingo Marcolino

    2015-01-01

    At present, many useful tools for reference management are available for use. They can be either off-line softwares or accessible Websites to all users in the internet. Their target is to facilitate the production of scientific text. But, to accomplish that, the featured bibliographic style should be effectively inserted, and the program has to be free. Here in this tutorial, we present Endnote Web®, a bibliographic reference management program comprising these two requirements: it contains the Brazilian Journal of Cardiovascular Surgery reference format and its use is free for charge after sign-in in IP registered terminal in Web of Science®.

  8. Endnote Web tutorial for BJCVS/RBCCV

    Science.gov (United States)

    de Oliveira, Marcos Aurélio Barboza; dos Santos, Carlos Alberto; Brandi, Antônio Carlos; Botelho, Paulo Henrique Husseini; Sciarra, Adília Maria Pires; Braile, Domingo Marcolino

    2015-01-01

    At present, many useful tools for reference management are available for use. They can be either off-line softwares or accessible Websites to all users in the internet. Their target is to facilitate the production of scientific text. But, to accomplish that, the featured bibliographic style should be effectively inserted, and the program has to be free. Here in this tutorial, we present Endnote Web®, a bibliographic reference management program comprising these two requirements: it contains the Brazilian Journal of Cardiovascular Surgery reference format and its use is free for charge after sign-in in IP registered terminal in Web of Science®. PMID:26107457

  9. BIS 220 Tutorials /bis220dotcom

    OpenAIRE

    ramya85

    2015-01-01

    BIS 220 Entire Course   For more course tutorials visit www.bis220.com   BIS 220 Week 1 Individual Assignment Information Technology Acts Paper BIS 220 Week 1 DQ 1 BIS 220 Week 1 DQ 2 BIS 220 Week 2 LT Reflection Summary BIS 220 Week 2 Individual Assignment Information Systems Proposal BIS 220 Week 2 DQ 1 BIS 220 Week 2 DQ 2 BIS 220 Week 3 Individual Assignment Types of Electronic Commerce Activity BIS 220 Week 3 LT Reflection Summ...

  10. BIS 220 Tutorials / bis220dotcom

    OpenAIRE

    rajitha82

    2015-01-01

    BIS 220 Entire Course   For more course tutorials visit www.bis220.com   BIS 220 Week 1 Individual Assignment Information Technology Acts Paper BIS 220 Week 1 DQ 1 BIS 220 Week 1 DQ 2 BIS 220 Week 2 LT Reflection Summary BIS 220 Week 2 Individual Assignment Information Systems Proposal BIS 220 Week 2 DQ 1 BIS 220 Week 2 DQ 2 BIS 220 Week 3 Individual Assignment Types of Electronic Commerce Activity BIS 220 Week 3 LT Reflection Summ...

  11. Tutorial examples for uncertainty quantification methods.

    Energy Technology Data Exchange (ETDEWEB)

    De Bord, Sarah [Univ. of California, Davis, CA (United States)

    2015-08-01

    This report details the work accomplished during my 2015 SULI summer internship at Sandia National Laboratories in Livermore, CA. During this internship, I worked on multiple tasks with the common goal of making uncertainty quantification (UQ) methods more accessible to the general scientific community. As part of my work, I created a comprehensive numerical integration example to incorporate into the user manual of a UQ software package. Further, I developed examples involving heat transfer through a window to incorporate into tutorial lectures that serve as an introduction to UQ methods.

  12. Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process

    Science.gov (United States)

    Book, Todd A.; Sangid, Michael D.

    2016-07-01

    Although additive manufacturing offers numerous performance advantages for different applications, it is not being used for critical applications due to uncertainties in structural integrity as a result of innate process variability and defects. To minimize uncertainty, the current approach relies on the concurrent utilization of process monitoring, post-processing, and non-destructive inspection in addition to an extensive material qualification process. This paper examines an alternative approach by evaluating the application of select surface process techniques, to include sliding severe plastic deformation (SPD) and fine particle shot peening, on direct metal laser sintering-produced AlSi10Mg materials. Each surface processing technique is compared to baseline as-built and post-processed samples as a proof of concept for surface enhancement. Initial results pairing sliding SPD with the manufacture's recommended thermal stress relief cycle demonstrated uniform recrystallization of the microstructure, resulting in a more homogeneous distribution of strain among the microstructure than as-built or post-processed conditions. This result demonstrates the potential for the in situ application of various surface processing techniques during the layerwise direct metal laser sintering build process.

  13. Design and evaluation of a computer tutorial on electric fields

    Science.gov (United States)

    Morse, Jeanne Jackson

    Research has shown that students do not fully understand electric fields and their interactions with charged particles after completing traditional classroom instruction. The purpose of this project was to develop a computer tutorial to remediate some of these difficulties. Research on the effectiveness of computer-delivered instructional materials showed that students would learn better from media incorporating user-controlled interactive graphics. Two versions of the tutorial were tested. One version used interactive graphics and the other used static graphics. The two versions of the tutorial were otherwise identical. This project was done in four phases. Phases I and II were used to refine the topics covered in the tutorial and to test the usability of the tutorial. The final version of the tutorial was tested in Phases III and IV. The tutorial was tested using a pretest-posttest design with a control group. Both tests were administered in an interview setting. The tutorial using interactive graphics was more effective at remediating students' difficulties than the tutorial using static graphics for students in Phase III (p = 0.001). In Phase IV students who viewed the tutorial with static graphics did better than those viewing interactive graphics. The sample size in Phase IV was too small for this to be a statistically meaningful result. Some student reasoning errors were noted during the interviews. These include difficulty with the vector representation of electric fields, treating electric charge as if it were mass, using faulty algebraic reasoning to answer questions involving ratios and proportions, and using Coulomb's law in situations in which it is not appropriate.

  14. TUTORIAL COACHING AS A STRATEGY OF PROFESSIONAL AND PERSONAL DEVELOPMENT: AN EXPERIENCE-BASED STUDY IN A SECONDARY EDUCATION INSTITUTE

    Directory of Open Access Journals (Sweden)

    GLADYS IBETH ARIZA ORDÓÑEZ

    2005-01-01

    Full Text Available Tutorial accompaniment constitutes at present a necessary alternative in the framework of higher education. This workstarts with a general conceptualization of the tutorial, and makes a review of the styles, methods and proceduresrelated to this academic life facet which can effectively contribute to reach the goals the present higher education pursuitwhen it is applied in a coherent and systematic way.Considering the changes that the economy as well as the legislation have generated in education, and mainly in thoseLatin-American university programs, it is necessary to generate changing processes on the curriculum conceptualization,the teaching activities and the academic planning, and also to promote tutorial programs to the students, in order torespond to the difficulties they confront along the different stages of their lives. This research emerges from the onecarried out about the effectiveness of a tutorial program at a Psychology Department. It pretends to highlight theprincipal points of the accompaniment tutorial programs that require to be adjusted and adapted, in order to facilitatean educational service aimed to consider not only the professional training but the personal formation as well.

  15. Partial Least Squares tutorial for analyzing neuroimaging data

    Directory of Open Access Journals (Sweden)

    Patricia Van Roon

    2014-09-01

    Full Text Available Partial least squares (PLS has become a respected and meaningful soft modeling analysis technique that can be applied to very large datasets where the number of factors or variables is greater than the number of observations. Current biometric studies (e.g., eye movements, EKG, body movements, EEG are often of this nature. PLS eliminates the multiple linear regression issues of over-fitting data by finding a few underlying or latent variables (factors that account for most of the variation in the data. In real-world applications, where linear models do not always apply, PLS can model the non-linear relationship well. This tutorial introduces two PLS methods, PLS Correlation (PLSC and PLS Regression (PLSR and their applications in data analysis which are illustrated with neuroimaging examples. Both methods provide straightforward and comprehensible techniques for determining and modeling relationships between two multivariate data blocks by finding latent variables that best describes the relationships. In the examples, the PLSC will analyze the relationship between neuroimaging data such as Event-Related Potential (ERP amplitude averages from different locations on the scalp with their corresponding behavioural data. Using the same data, the PLSR will be used to model the relationship between neuroimaging and behavioural data. This model will be able to predict future behaviour solely from available neuroimaging data. To find latent variables, Singular Value Decomposition (SVD for PLSC and Non-linear Iterative PArtial Least Squares (NIPALS for PLSR are implemented in this tutorial. SVD decomposes the large data block into three manageable matrices containing a diagonal set of singular values, as well as left and right singular vectors. For PLSR, NIPALS algorithms are used because it provides amore precise estimation of the latent variables. Mathematica notebooks are provided for each PLS method with clearly labeled sections and subsections. The

  16. Direct selective laser sintering of high performance metals: Machine design, process development and process control

    Science.gov (United States)

    Das, Suman

    1998-11-01

    This dissertation describes the development of an advanced manufacturing technology known as Direct Selective Laser Sintering (Direct SLS). Direct SLS is a laser based rapid manufacturing technology that enables production of functional, fully dense, metal and cermet components via the direct, layerwise consolidation of constituent powders. Specifically, this dissertation focuses on a new, hybrid net shape manufacturing technique known as Selective Laser Sintering/Hot Isostatic Pressing (SLS/HIP). The objective of research presented in this dissertation was to establish the fundamental machine technology and processing science to enable direct SLS fabrication of metal components composed of high performance, high temperature metals and alloys. Several processing requirements differentiate direct SLS of metals from SLS of polymers or polymer coated powders. Perhaps the most important distinguishing characteristic is the regime of high temperatures involved in direct SLS of metals. Biasing the temperature of the feedstock powder via radiant preheat prior to and during SLS processing was shown to be beneficial. Preheating the powder significantly influenced the flow and wetting characteristics of the melt. During this work, it was conclusively established that powder cleanliness is of paramount importance for successful layerwise consolidation of metal powders by direct SLS. Sequential trials were conducted to establish optimal bake-out and degas cycles under high vacuum. These cycles agreed well with established practices in the powder metallurgy industry. A study of some of the important transport mechanisms in direct SLS of metals was undertaken to obtain a fundamental understanding of the underlying process physics. This study not only provides an explanation of phenomena observed during SLS processing of a variety of metallic materials but also helps in developing selection schemes for those materials that are most amenable to direct SLS processing. The

  17. Using Ionic Liquids in Selective Hydrocarbon Conversion Processes

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Yongchun; Periana, Roy; Chen, Weiqun; van Duin, Adri; Nielsen, Robert; Shuler, Patrick; Ma, Qisheng; Blanco, Mario; Li, Zaiwei; Oxgaard, Jonas; Cheng, Jihong; Cheung, Sam; Pudar, Sanja

    2009-09-28

    This is the Final Report of the five-year project Using Ionic Liquids in Selective Hydrocarbon Conversion Processes (DE-FC36-04GO14276, July 1, 2004- June 30, 2009), in which we present our major accomplishments with detailed descriptions of our experimental and theoretical efforts. Upon the successful conduction of this project, we have followed our proposed breakdown work structure completing most of the technical tasks. Finally, we have developed and demonstrated several optimized homogenously catalytic methane conversion systems involving applications of novel ionic liquids, which present much more superior performance than the Catalytica system (the best-to-date system) in terms of three times higher reaction rates and longer catalysts lifetime and much stronger resistance to water deactivation. We have developed in-depth mechanistic understandings on the complicated chemistry involved in homogenously catalytic methane oxidation as well as developed the unique yet effective experimental protocols (reactors, analytical tools and screening methodologies) for achieving a highly efficient yet economically feasible and environmentally friendly catalytic methane conversion system. The most important findings have been published, patented as well as reported to DOE in this Final Report and our 20 Quarterly Reports.

  18. Human values in the team leader selection process.

    Science.gov (United States)

    Rovira, Núria; Ozgen, Sibel; Medir, Magda; Tous, Jordi; Alabart, Joan Ramon

    2012-03-01

    The selection process of team leaders is fundamental if the effectiveness of teams is to be guaranteed. Human values have proven to be an important factor in the behaviour of individuals and leaders. The aim of this study is twofold. The first is to validate Schwartz's survey of human values. The second is to determine whether there are any relationships between the values held by individuals and their preferred roles in a team. Human values were measured by the items of the Schwartz Value Survey (SVS) and the preferred roles in a team were identified by the Belbin Self Perception Inventory (BSPI). The two questionnaires were answered by two samples of undergraduate students (183 and 177 students, respectively). As far as the first objective is concerned, Smallest Space Analysis (SSA) was performed at the outset to examine how well the two-dimensional circular structure, as postulated by Schwartz, was represented in the study population. Then, the results of this analysis were compared and contrasted with those of two other published studies; one by Schwartz (2006) and one by Ros and Grad (1991). As for the second objective, Pearson correlation coefficients were computed to assess the associations between the ratings on the SVS survey items and the ratings on the eight team roles as measured by the BSPI.

  19. Tutorial on method verification: A routine method for the determination of heroin

    Directory of Open Access Journals (Sweden)

    Kar-Weng Chan

    2015-06-01

    Full Text Available Method verification is crucial in ensuring that a routine quantitative method remains fit for analysis. Verification is less comprehensive than validation because fewer aspects are covered. In addition, the aspects to be verified must have a significant impact on the analytical readings. In this paper, a verification process is presented in the form of tutorial in order to aid narcotics laboratories in performing this task in a more competent manner. Although heroin is used as an example in this tutorial, the overall procedure can be extended to other drug compounds as well. The procedure presented here, however, serves as a minimum requirement. Additional aspects should be included to ensure that the overall verification process is able to meet the criteria set by the clients as well as the legal practitioners.

  20. Interactive video tutorials for enhancing problem solving, reasoning, and meta-cognitive skills of introductory physics students

    CERN Document Server

    Singh, Chandralekha

    2016-01-01

    We discuss the development of interactive video tutorial-based problems to help introductory physics students learn effective problem solving heuristics. The video tutorials present problem solving strategies using concrete examples in an interactive environment. They force students to follow a systematic approach to problem solving and students are required to solve sub-problems (research-guided multiple choice questions) to show their level of understanding at every stage of prob lem solving. The tutorials are designed to provide scaffolding support at every stage of problem solving as needed and help students view the problem solving process as an opportunity for knowledge and skill acquisition rather than a "plug and chug" chore. A focus on helping students learn first to analyse a problem qualitatively, and then to plan a solution in terms of the relevant physics principles, can be useful for developing their reasoning skills. The reflection stage of problem solving can help students develop meta-cogniti...

  1. A BMP selection process based on the granulometry of runoff solids ...

    African Journals Online (AJOL)

    A BMP selection process based on the granulometry of runoff solids in a ... and flow were recorded, in addition to the pollution associated with such flows. ... best management practices using the process selection diagrams is presented.

  2. Guidelines to develop interactive tutorials on 3D biomolecules: the case of DNA repair by photolyase

    Directory of Open Access Journals (Sweden)

    Larissa Assis Barony Valadares Fonseca

    2016-11-01

    Full Text Available INTRODUCTION: This work presents the following guidelines for developing interactive learning objects on the 3D biomolecules: i- identify a relevant educational need; ii-select an appropriate subject; iii- employ interactive 3D molecular structures; iv- simultaneously display animation with related textual information or 2D diagrams; v- integrating different modes of representation of chemical phenomena. Based on these, was constructed the "Photolyase Tutorial". Photolyase is an enzyme that repairs DNA. It recognizes the cyclobutane pyrimidine dimer lesion (CPD caused by exposure to ultraviolet light. Understanding the repair mechanism requires understanding the structure-activity relationships of the molecules involved. Therefore, this topic is a convenient subject for teaching key aspects of the structure of protein and nucleic acids. There are few interactive 3D DNA repair tutorials available and most of these are in english, therefore not acessible for students that do not domain this language. Besides, these tutorials generally focus only on displaying structural features without make foster correlations between the structure and chemical aspects of repair mechanisms. OBJECTIVES: In order to construct a interactive tutorial that fills these gaps, the 3D structures of a DNA molecule, a DNA with CPD lesion and the photolyase enzyme were manipulated focusing on structural and chemical explanation. MATERIALS AND METHODS: These structures were obtained from PDB (http://www.rcsb.org/pdb/home/home.do and manipulated to show biochemical and chemical concepts by using the resources from the LABIQ Platform (http://labiq.is.usp.br. DISCUSSION AND RESULTS: Several concepts are covered, i.e., H-bonding, active site, co-factors etc. The tutorial is organized in small conceptual blocks presenting, in a stepwise fashion, how the enzyme recognizes the DNA lesion and proceeds to repair. Each block comprises a trigger button that controls the interactive

  3. Lab-Tutorials for teaching quantum physics (Lab-Tutorials fuer den Quantenphysik Unterricht)

    CERN Document Server

    Wittmann, M C

    2006-01-01

    English abstract: In the "Intuitive Quantum Physics" course, we use graphical interpretations of mathematical equations and qualitative reasoning to develop and teach a simplified model of quantum physics. Our course contains three units: Wave physics, Development of a conceptual toolbox, and quantum physics. It also contains three key themes: wave-particle duality, the Schroedinger equation, and tunneling of quantum particles. Students learn most new material in lab-tutorials in which students work in small groups (3 to 3 people) on specially designed worksheets. Lecture reinforces the lab-tutorial content and focuses more on issues about the nature of science. Data show that students are able to learn some of the most difficult concepts in the course, and also that students learn to believe that there is a conceptually accessible structure to the physics in the course. German abstract: Im Kurs "Intuitive Quantum Physics" werden graphische Interpretationen mathematischer Gleichungen und qualitatives Denken d...

  4. Implementation of Inquiry-Based Tutorials in AN Introductory Physics Course: the Role of the Graduate Teaching Assistant.

    Science.gov (United States)

    Thoresen, Carol Wiggins

    1994-01-01

    This study determined if the training provided physics teaching assistants was sufficient to accomplish the objectives of inquiry-based tutorials for an introductory physics course. Qualitative research methods were used: (1) to determine if the Physics by Inquiry method was modeled; (2) to describe the process from the teaching assistant perspective; (3) to determine TA opinions on training methods; (4) to develop a frame of reference to better understand the role of TA's as instructional support staff. The study determined that the teaching assistants verbalized appropriate instructional actions, but were observed to use a predominantly didactic teaching style. TA's held a variety of perceptions and beliefs about inquiry -based learning and how science is learned. They felt comfortable in the role of tutorial instructor. They were satisfied with the training methods provided and had few suggestions to change or improve training for future tutorial instructors. A concurrent theme of teacher action dependent on teacher beliefs was sustained throughout the study. The TA's actions, as tutorial instructors, reflected their educational beliefs, student background and learning experiences. TA's performance as tutorial instructors depended on what they think and believe about learning science. Practical implications exist for training teaching assistants to be tutorial instructors. Some recommendations may be appropriate for TA's required to use instructional methods that they have not experienced as students. Interview prospective teaching assistants to determine educational experience and beliefs. Employ inexperienced teaching assistants whose perspectives match the proposed instructional role and who might be more receptive to modeling. Incorporate training into staff meetings. Provide time for TA's to experience the instructional model with simulation or role play as students and as instructors, accompanied by conference discussion. Use strategies known to enhance

  5. Redox processes and water quality of selected principal aquifer systems

    Science.gov (United States)

    McMahon, P.B.; Chapelle, F.H.

    2008-01-01

    Reduction/oxidation (redox) conditions in 15 principal aquifer (PA) systems of the United States, and their impact on several water quality issues, were assessed from a large data base collected by the National Water-Quality Assessment Program of the USGS. The logic of these assessments was based on the observed ecological succession of electron acceptors such as dissolved oxygen, nitrate, and sulfate and threshold concentrations of these substrates needed to support active microbial metabolism. Similarly, the utilization of solid-phase electron acceptors such as Mn(IV) and Fe(III) is indicated by the production of dissolved manganese and iron. An internally consistent set of threshold concentration criteria was developed and applied to a large data set of 1692 water samples from the PAs to assess ambient redox conditions. The indicated redox conditions then were related to the occurrence of selected natural (arsenic) and anthropogenic (nitrate and volatile organic compounds) contaminants in ground water. For the natural and anthropogenic contaminants assessed in this study, considering redox conditions as defined by this framework of redox indicator species and threshold concentrations explained many water quality trends observed at a regional scale. An important finding of this study was that samples indicating mixed redox processes provide information on redox heterogeneity that is useful for assessing common water quality issues. Given the interpretive power of the redox framework and given that it is relatively inexpensive and easy to measure the chemical parameters included in the framework, those parameters should be included in routine water quality monitoring programs whenever possible.

  6. Outcomes of tutorial teaching. Strategies for nursing training in the new pedagogical model.

    Directory of Open Access Journals (Sweden)

    Zulema Bos Rodríguez

    2005-12-01

    Full Text Available Background: Educacation at work is the main form of the educative process in the clinical cycle of the medical higher educational system which the superior form is the tutorial one. Objective: To evaluate the strategy applied in the tutorial in the nursing new pedagogical model. Methods: A descriptive study of intervention and evaluation which started in the 1st academic year on September, 2004 collecting the application and evaluation of the strategy applied in the tutorial process of the nursing new pedagogical model. 163 students of the 2nd academic year of the Bachellor of Science in Nursing were the universe of this investigation. 50 % of them were taken as a randomized sample from 82 groups. Differente documents were reviewed and a survey was applied in order to evaluate the strategy according to the attention received by their tutors and the mark obtained in the practical final exam of 1st and 2nd academic year of their study. Results: Strategies were evaluated as Good taking into consideration the criterion of the managers of the hospital institution and the personnel in charge of the educative process. All the students passed the practical final exam and there was a predominium of the highest mark (5. The majority of the students consider the attention given by their tutors as Good. The results in the final exams in both courses behaved in a similar way with a slight augmentation in the highest category (5 in the academic course 2004-2005.

  7. A TUTORIAL INTRODUCTION TO ADAPTIVE FRACTAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Michael A Riley

    2012-09-01

    Full Text Available The authors present a tutorial description of adaptive fractal analysis (AFA. AFA utilizes an adaptive detrending algorithm to extract globally smooth trend signals from the data and then analyzes the scaling of the residuals to the fit as a function of the time scale at which the fit is computed. The authors present applications to synthetic mathematical signals to verify the accuracy of AFA and demonstrate the basic steps of the analysis. The authors then present results from applying AFA to time series from a cognitive psychology experiment on repeated estimation of durations of time to illustrate some of the complexities of real-world data. AFA shows promise in dealing with many types of signals, but like any fractal analysis method there are special challenges and considerations to take into account, such as determining the presence of linear scaling regions.

  8. Maximum Segment Sum, Monadically (distilled tutorial

    Directory of Open Access Journals (Sweden)

    Jeremy Gibbons

    2011-09-01

    Full Text Available The maximum segment sum problem is to compute, given a list of integers, the largest of the sums of the contiguous segments of that list. This problem specification maps directly onto a cubic-time algorithm; however, there is a very elegant linear-time solution too. The problem is a classic exercise in the mathematics of program construction, illustrating important principles such as calculational development, pointfree reasoning, algebraic structure, and datatype-genericity. Here, we take a sideways look at the datatype-generic version of the problem in terms of monadic functional programming, instead of the traditional relational approach; the presentation is tutorial in style, and leavened with exercises for the reader.

  9. Informed Source Separation: A Bayesian Tutorial

    Science.gov (United States)

    Knuth, Kevin H.

    2005-01-01

    Source separation problems are ubiquitous in the physical sciences; any situation where signals are superimposed calls for source separation to estimate the original signals. In h s tutorial I will discuss the Bayesian approach to the source separation problem. This approach has a specific advantage in that it requires the designer to explicitly describe the signal model in addition to any other information or assumptions that go into the problem description. This leads naturally to the idea of informed source separation, where the algorithm design incorporates relevant information about the specific problem. This approach promises to enable researchers to design their own high-quality algorithms that are specifically tailored to the problem at hand.

  10. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    J. Herr

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. The current system, including future developments for the project and the field in general, was recently presented at the CHEP 2006 conference in Mumbai, India. The relevant presentations and papers can be found here: The Web Lecture Archive Project A Web Lecture Capture System with Robotic Speaker Tracking This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. All lectures can be viewed on any major platform with any common internet browser, either via streaming or local download (for limited bandwidth). Please enjoy the l...

  11. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    Goldfarb, S.

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, WLAP, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. The current system, including future developments for the project and the field in general, was recently presented at the CHEP 2006 conference in Mumbai, India. The relevant presentations and papers can be found here: The Web Lecture Archive Project. A Web Lecture Capture System with Robotic Speaker Tracking This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. All lectures can be viewed on any major platform with any common internet browser, either via streaming or local download (for limited bandwidth). Please e...

  12. Tutorial: Radiation Effects in Electronic Systems

    Science.gov (United States)

    Pellish, Jonathan A.

    2017-01-01

    This tutorial presentation will give an overview of radiation effects in electrical, electronic, and electromechanical (EEE) components as it applies to civilian space systems of varying size and complexity. The natural space environment presents many unique threats to electronic systems regardless of where the systems operate from low-Earth orbit to interplanetary space. The presentation will cover several topics, including: an overview and introduction to the applicable space radiation environments common to a broad range of mission designs; definitions and impacts of effects due to impinging particles in the space environment e.g., total ionizing dose (TID), total non-ionizing dose (TNID), and single-event effects (SEE); and, testing for and evaluation of TID, TNID, and SEE in EEE components.

  13. A tutorial on Bayesian Normal linear regression

    Science.gov (United States)

    Klauenberg, Katy; Wübbeler, Gerd; Mickan, Bodo; Harris, Peter; Elster, Clemens

    2015-12-01

    Regression is a common task in metrology and often applied to calibrate instruments, evaluate inter-laboratory comparisons or determine fundamental constants, for example. Yet, a regression model cannot be uniquely formulated as a measurement function, and consequently the Guide to the Expression of Uncertainty in Measurement (GUM) and its supplements are not applicable directly. Bayesian inference, however, is well suited to regression tasks, and has the advantage of accounting for additional a priori information, which typically robustifies analyses. Furthermore, it is anticipated that future revisions of the GUM shall also embrace the Bayesian view. Guidance on Bayesian inference for regression tasks is largely lacking in metrology. For linear regression models with Gaussian measurement errors this tutorial gives explicit guidance. Divided into three steps, the tutorial first illustrates how a priori knowledge, which is available from previous experiments, can be translated into prior distributions from a specific class. These prior distributions have the advantage of yielding analytical, closed form results, thus avoiding the need to apply numerical methods such as Markov Chain Monte Carlo. Secondly, formulas for the posterior results are given, explained and illustrated, and software implementations are provided. In the third step, Bayesian tools are used to assess the assumptions behind the suggested approach. These three steps (prior elicitation, posterior calculation, and robustness to prior uncertainty and model adequacy) are critical to Bayesian inference. The general guidance given here for Normal linear regression tasks is accompanied by a simple, but real-world, metrological example. The calibration of a flow device serves as a running example and illustrates the three steps. It is shown that prior knowledge from previous calibrations of the same sonic nozzle enables robust predictions even for extrapolations.

  14. Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products

    Directory of Open Access Journals (Sweden)

    Ana Pilipović

    2014-03-01

    Full Text Available Additive manufacturing (AM is increasingly applied in the development projects from the initial idea to the finished product. The reasons are multiple, but what should be emphasised is the possibility of relatively rapid manufacturing of the products of complicated geometry based on the computer 3D model of the product. There are numerous limitations primarily in the number of available materials and their properties, which may be quite different from the properties of the material of the finished product. Therefore, it is necessary to know the properties of the product materials. In AM procedures the mechanical properties of materials are affected by the manufacturing procedure and the production parameters. During SLS procedures it is possible to adjust various manufacturing parameters which are used to influence the improvement of various mechanical and other properties of the products. The paper sets a new mathematical model to determine the influence of individual manufacturing parameters on the polymer product made by selective laser sintering. Old mathematical model is checked by statistical method with central composite plan and it is established that old mathematical model must be expanded with new parameter beam overlay ratio. Verification of new mathematical model and optimization of the processing parameters are made on SLS machine.

  15. Intelligent tutorial system for selftraining in tuning of control systems; Sistema tutorial inteligente para el autoentrenamiento en sintonizacion de sistemas de control

    Energy Technology Data Exchange (ETDEWEB)

    Romero Jimenez, Guillermo; Perez Ocampo, Maria Concepcion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In this paper the design, development and validation of an intelligent tutorial system oriented to the instruction of techniques of tuning of control systems is described. This system is based on systems previously developed in the Simulation Unit of the Instituto de Investigaciones Electricas (IIE). The designed system accounts with four modules: of knowledge, the student model, of tutor and of interface, basic characteristics that allows to locate this system in the context of the intelligent tutorial systems. In this system in particular, the knowledge module was only modified, because advantage is taken of the existing structure to incorporate a new dominion of application: the one of the techniques of tuning of control systems. The system maintains the characteristic that it can also be used as a consultation system. In addition to the design and validation of the tutorial system, when following the methodology of processing the degree of generality of the developed system, was evaluated, taking into account the evaluation and quantification of metrics that the engineering software proposes. [Spanish] En este trabajo se describen el diseno, el desarrollo y la validacion de un sistema tutorial inteligente orientado a la instruccion de tecnicas de sintonizacion de sistemas de control. Este sistema esta basado en sistemas desarrollados anteriormente en la Unidad de Simulacion del Instituto de Investigaciones Electricas (IIE). El sistema disenado cuenta con cuatro modulos: de conocimiento, del modelo del estudiante, de tutor y de interfaz, caracteristica principal que permite ubicar a este sistema en el contexto de los sistemas tutoriales inteligentes. En este sistema en particular solo se modifica el modulo de conocimiento, pues se aprovecha la estructura existente para incorporar un nuevo dominio de aplicacion: el de las tecnicas de sintonizacion de sistemas de control. El sistema mantiene la caracteristica de que tambien puede utilizarse como un sistema de

  16. Developing Online Tutorials to Improve Information Literacy Skills for Second-Year Nursing Students of University College Dublin

    Science.gov (United States)

    Walters, Kirsteen; Bolich, Cecilia; Duffy, Daniel; Quinn, Ciarán; Walsh, Kathryn; Connolly, Sarah

    2015-01-01

    This article explores the process of developing online tutorials for a specified student group, in this case Second-Year Nursing students in University College Dublin. The product was commissioned by the Health Sciences Library and the UCD School of Nursing, Midwifery, and Health Systems. It was developed as a "Capstone Project" for part…

  17. A peer-led supplemental tutorial project for medical physiology: implementation in a large class.

    Science.gov (United States)

    Kibble, Jonathan D

    2009-06-01

    The purpose of this study was to evaluate the practicality of implementing a peer-teaching program in a large class (>350 students) of medical students and whether such a program is beneficial. Case-based problems were developed by faculty members to facilitate student problem solving and discussion. Voluntary student enrollment was available during the first week of a semester. Tutorials took place during out of class time and were facilitated by peers from the previous class. Tutors were selected for their outstanding performance in physiology; they were provided with training in facilitation skills and were given a package of model answers. Sixty-eight students enrolled in this pilot program and were organized into groups of approximately 8 students. On average, students attended four of six tutorials. Posttutorial quiz scores were significantly greater than paired pretest scores. Surveys showed that students had high expectations at the outset, which were matched with positive perceptions at the end of the tutorial program; the use of near-peer tutors was especially well received. Tutors also gave high approval ratings for their experiences. In conclusion, the peer tutoring program was logistically straightforward to implement in a large class and was endorsed by the participants.

  18. Effectiveness of student-led objective tutorials in pharmacology teaching to medical students.

    Science.gov (United States)

    Arora, Kriti; Hashilkar, Nayana Kamalnayan

    2016-10-01

    Current teaching in pharmacology is passive with less emphasis on clinical application. There is a need to incorporate newer instructional designs into pharmacology. Student-led objective tutorial (SLOT) is one of the novel designs to enhance interest among learners, provide opportunities for group learning, and facilitate self-directed learning. This study aims to assess the effectiveness of SLOTs over conventional tutorials (CTs) in pharmacology and to obtain feedback from the students regarding their perceptions about it. The regular batch of MBBS 2(nd) professional in pharmacology was randomly divided into two groups. Five topics from central nervous system (CNS) were selected. One group received SLOT as the instructional strategy, whereas the other group went through CTs. At the end of the module, a written test was conducted to assess the effectiveness of both strategies. The students provided feedback regarding their experience using a prevalidated questionnaire. The mean scores of both the groups were analyzed using Mann-Whitney U-test. There was no significant difference in the mean scores of the end of the module test. However, the overall passing percentage was significantly higher in the intervention group (P = 0.043). A total of 45.71% students favored it as a future tutorial method and expressed that SLOT enhanced their ability to learn independently. SLOT is an effective teaching-learning method to teach pharmacology to medical undergraduates. It enhances interest among learners and increases the ability to learn independently.

  19. A New Lecture-Tutorial for Teaching about Molecular Excitations and Synchrotron Radiation

    Science.gov (United States)

    Wallace, Colin S.; Prather, Edward E.; Hornstein, Seth D.; Burns, Jack O.; Schlingman, Wayne M.; Chambers, Timothy G.

    2016-01-01

    Light and spectroscopy are among the most important and frequently taught topics in introductory college-level general education astronomy courses (hereafter Astro 101). This is due to the fact that the vast majority of observational data studied by astronomers arrives at Earth in the form of light. While there are many processes by which matter can emit and absorb light, Astro 101 courses typically limit their instruction to the Bohr model of the atom and electron energy level transitions. In this paper, we report on the development of a new Lecture-Tutorial to help students learn about other processes that are responsible for the emission and absorption of light, namely molecular rotations, molecular vibrations, and the acceleration of charged particles by magnetic fields. Note that this paper primarily focuses on describing the variety of representations and reasoning tasks designed for this Lecture-Tutorial; while the end of this paper highlights some data that are suggestive of the Lecture-Tutorial's effectiveness, our more comprehensive analysis of its efficacy will be presented in a future publication.

  20. Econobiophysics - game of choosing. Model of selection or election process with diverse accessible information

    Science.gov (United States)

    2011-01-01

    We propose several models applicable to both selection and election processes when each selecting or electing subject has access to different information about the objects to choose from. We wrote special software to simulate these processes. We consider both the cases when the environment is neutral (natural process) as well as when the environment is involved (controlled process). PMID:21892959

  1. Language selection in bilingual speech: evidence for inhibitory processes.

    Science.gov (United States)

    Kroll, Judith F; Bobb, Susan C; Misra, Maya; Guo, Taomei

    2008-07-01

    Although bilinguals rarely make random errors of language when they speak, research on spoken production provides compelling evidence to suggest that both languages are active when only one language is spoken (e.g., [Poulisse, N. (1999). Slips of the tongue: Speech errors in first and second language production. Amsterdam/Philadelphia: John Benjamins]). Moreover, the parallel activation of the two languages appears to characterize the planning of speech for highly proficient bilinguals as well as second language learners. In this paper, we first review the evidence for cross-language activity during single word production and then consider the two major alternative models of how the intended language is eventually selected. According to language-specific selection models, both languages may be active but bilinguals develop the ability to selectively attend to candidates in the intended language. The alternative model, that candidates from both languages compete for selection, requires that cross-language activity be modulated to allow selection to occur. On the latter view, the selection mechanism may require that candidates in the nontarget language be inhibited. We consider the evidence for such an inhibitory mechanism in a series of recent behavioral and neuroimaging studies.

  2. Selected Tools for Risk Analysis in Logistics Processes

    Science.gov (United States)

    Kulińska, Ewa

    2012-03-01

    As each organization aims at managing effective logistics processes, risk factors can and should be controlled through proper system of risk management. Implementation of complex approach to risk management allows for the following: - evaluation of significant risk groups associated with logistics processes implementation, - composition of integrated strategies of risk management, - composition of tools for risk analysis in logistics processes.

  3. Donald Campbell's Model of the Creative Process: Creativity as Blind Variation and Selective Retention.

    Science.gov (United States)

    Simonton, Dean Keith

    1998-01-01

    This introductory article discusses a blind-variation and selective-retention model of the creative process developed by Donald Campbell. According to Campbell, creativity contains three conditions: a mechanism for introducing variation, a consistent selection process, and a mechanism for preserving and reproducing selected variations. (Author/CR)

  4. Effectiveness of Tutorials for Introductory Physics in Argentinean high schools

    Science.gov (United States)

    Benegas, J.; Flores, J. Sirur

    2014-06-01

    This longitudinal study reports the results of a replication of Tutorials in Introductory Physics in high schools of a Latin-American country. The main objective of this study was to examine the suitability of Tutorials for local science education reform. Conceptual learning of simple resistive electric circuits was determined by the application of the single-response multiple-choice test "Determining and Interpreting Resistive Electric Circuits Concepts Test" (DIRECT) to high school classes taught with Tutorials and traditional instruction. The study included state and privately run schools of different socioeconomic profiles, without formal laboratory space and equipment, in classes of mixed-gender and female-only students, taught by novice and experienced instructors. Results systematically show that student learning is significantly higher in the Tutorials classes compared with traditional teaching for all of the studied conditions. The results also show that long-term learning (one year after instruction) in the Tutorials classes is highly satisfactory, very similar to the performance of the samples of college students used to develop the test DIRECT. On the contrary, students following traditional instruction returned one year after instruction to the poor performance (conceptual knowledge of basic physics recently determined by a systematic study of first-year students attending seven universities in Spain and four Latin-American countries. Some replication and adaptation problems and difficulties of this experience are noted, as well as recommendations for successful use of Tutorials in high schools of similar educational systems.

  5. Eligibility Worker Selection Process: Biographical Inventory Validation Study.

    Science.gov (United States)

    Darany, Theodore; And Others

    One way for agencies to reduce fiscal stress is to minimize employee turnover. A project undertaken by San Bernardino County (California) to reduce employee turnover through the development, validation, and use of a non-traditional worker selection instrument (biographical inventory) is described. This project was aimed at the specific…

  6. Cultural Influence on Selective Attention Processes among Nigerian Adolescents.

    Science.gov (United States)

    Uba, Anselm

    Three experiments in auditory selective attention form the basis of this investigation of cross-cultural differences among the ethnic groups of the Ibo and Yoruba adolescents of Nigeria. A sample of 200 16-year-olds were randomly drawn from four secondary schools. Yoruba adolescents showed superior performance in a task-involving the repetition of…

  7. A selection-quotient process for packed word Hopf algebra

    CERN Document Server

    Duchamp, G H E; Tanasa, A

    2013-01-01

    In this paper, we define a Hopf algebra structure on the vector space spanned by packed words using a selection-quotient coproduct. We show that this algebra is free on its irreducible packed words. Finally, we give some brief explanations on the Maple codes we have used.

  8. Evaluasi Tutor Online untuk Meningkatkan Kualitas Layanan Tutorial Tatap Muka pada Pendidikan Jarak Jauh

    Directory of Open Access Journals (Sweden)

    Sugiran

    2016-04-01

    Full Text Available Underwriting performance of tutors at the Open University (UT is determined from the evaluation of tutors is done manually by distributing a questionnaire to students. This system is costly, less preferred students, interfere with the activity of the tutorial, the questionnaire processing is still done manually, and the report can not be received on time. The solution needs to be an evaluation system based tutors online to replace the old system. This study aims to generate application-based tutor online evaluation system which can improve the quality of service tutorial face to face at UT. Application design using the System Development Life Cycle (SDLC with several stages. The first is a systems planning (needs analysis, using interview techniques, dokuemntasi and observation. Second, system analysis (system requirements analysis conducted to formulate the solution of existing problems. Third, the system design (system design, which is depicted in diagrammatic form context-level data flow diagram (DFD. Fourth systems implementation (implementation of the system, carried out using pseudocode programming code based on the programming language, and Fifth, system testing, using black box method testing. Results test show that the application is in conformity with the needs of the system, where students can assess the tutor UT simply by accessing the internet. Expected results of this study, evaluation of the application form based online tutors can help UT in terms of improving the quality of face-to-face tutorial services.

  9. "ASTRO 101" Course Materials 2.0: Next Generation Lecture Tutorials and Beyond

    Science.gov (United States)

    Slater, Stephanie; Grazier, Kevin

    2015-01-01

    Early efforts to create course materials were often local in scale and were based on "gut instinct," and classroom experience and observation. While subsequent efforts were often based on those same instincts and observations of classrooms, they also incorporated the results of many years of education research. These "second generation" course materials, such as lecture tutorials, relied heavily on research indicating that instructors need to actively engage students in the learning process. While imperfect, these curricular innovations, have provided evidence that research-based materials can be constructed, can easily be disseminated to a broad audience, and can provide measureable improvement in student learning across many settings. In order to improve upon this prior work, next generation materials must build upon the strengths of these innovations while engineering in findings from education research, cognitive science, and instructor feedback. A next wave of materials, including a set of next generation lecture tutorials, have been constructed with attention to the body of research on student motivation, and cognitive load; and they are responsive to our body of knowledge on learning difficulties related to specific content in the domain. From instructor feedback, these materials have been constructed to have broader coverage of the materials typically taught in an ASTRO 101 course, to take less class time, and to be more affordable for students. This next generation of lecture tutorials may serve as a template of the ways in which course materials can be reengineered to respond to current instructor and student needs.

  10. Amphoteric oxide semiconductors for energy conversion devices: a tutorial review.

    Science.gov (United States)

    Singh, Kalpana; Nowotny, Janusz; Thangadurai, Venkataraman

    2013-03-07

    In this tutorial review, we discuss the defect chemistry of selected amphoteric oxide semiconductors in conjunction with their significant impact on the development of renewable and sustainable solid state energy conversion devices. The effect of electronic defect disorders in semiconductors appears to control the overall performance of several solid-state ionic devices that include oxide ion conducting solid oxide fuel cells (O-SOFCs), proton conducting solid oxide fuel cells (H-SOFCs), batteries, solar cells, and chemical (gas) sensors. Thus, the present study aims to assess the advances made in typical n- and p-type metal oxide semiconductors with respect to their use in ionic devices. The present paper briefly outlines the key challenges in the development of n- and p-type materials for various applications and also tries to present the state-of-the-art of defect disorders in technologically related semiconductors such as TiO(2), and perovskite-like and fluorite-type structure metal oxides.

  11. Selection of parameters for advanced machining processes using firefly algorithm

    Directory of Open Access Journals (Sweden)

    Rajkamal Shukla

    2017-02-01

    Full Text Available Advanced machining processes (AMPs are widely utilized in industries for machining complex geometries and intricate profiles. In this paper, two significant processes such as electric discharge machining (EDM and abrasive water jet machining (AWJM are considered to get the optimum values of responses for the given range of process parameters. The firefly algorithm (FA is attempted to the considered processes to obtain optimized parameters and the results obtained are compared with the results given by previous researchers. The variation of process parameters with respect to the responses are plotted to confirm the optimum results obtained using FA. In EDM process, the performance parameter “MRR” is increased from 159.70 gm/min to 181.6723 gm/min, while “Ra” and “REWR” are decreased from 6.21 μm to 3.6767 μm and 6.21% to 6.324 × 10−5% respectively. In AWJM process, the value of the “kerf” and “Ra” are decreased from 0.858 mm to 0.3704 mm and 5.41 mm to 4.443 mm respectively. In both the processes, the obtained results show a significant improvement in the responses.

  12. Substitution of Organic Solvents in Selected Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas; Rasmussen, Pia Brunn

    1997-01-01

    Volatile organic solvents (VOC)are becoming increasingly unwanted in industrial processes. Substitution of VOC with non-volatile, low-toxic compounds is a possibility to reduce VOC-use. It has been successfully demonstrated, that organic solvents used in cleaning processes in sheet offset printing...

  13. How Different Medical School Selection Processes Call upon Different Personality Characteristics

    NARCIS (Netherlands)

    Schripsema, Nienke R; van Trigt, Anke M; van der Wal, Martha A; Cohen-Schotanus, Janke

    2016-01-01

    BACKGROUND: Research indicates that certain personality traits relate to performance in the medical profession. Yet, personality testing during selection seems ineffective. In this study, we examine the extent to which different medical school selection processes call upon desirable personality char

  14. TUTORIAL: The dynamic neural field approach to cognitive robotics

    Science.gov (United States)

    Erlhagen, Wolfram; Bicho, Estela

    2006-09-01

    This tutorial presents an architecture for autonomous robots to generate behavior in joint action tasks. To efficiently interact with another agent in solving a mutual task, a robot should be endowed with cognitive skills such as memory, decision making, action understanding and prediction. The proposed architecture is strongly inspired by our current understanding of the processing principles and the neuronal circuitry underlying these functionalities in the primate brain. As a mathematical framework, we use a coupled system of dynamic neural fields, each representing the basic functionality of neuronal populations in different brain areas. It implements goal-directed behavior in joint action as a continuous process that builds on the interpretation of observed movements in terms of the partner's action goal. We validate the architecture in two experimental paradigms: (1) a joint search task; (2) a reproduction of an observed or inferred end state of a grasping-placing sequence. We also review some of the mathematical results about dynamic neural fields that are important for the implementation work. .

  15. Computational Modeling for Language Acquisition: A Tutorial With Syntactic Islands.

    Science.gov (United States)

    Pearl, Lisa S; Sprouse, Jon

    2015-06-01

    Given the growing prominence of computational modeling in the acquisition research community, we present a tutorial on how to use computational modeling to investigate learning strategies that underlie the acquisition process. This is useful for understanding both typical and atypical linguistic development. We provide a general overview of why modeling can be a particularly informative tool and some general considerations when creating a computational acquisition model. We then review a concrete example of a computational acquisition model for complex structural knowledge referred to as syntactic islands. This includes an overview of syntactic islands knowledge, a precise definition of the acquisition task being modeled, the modeling results, and how to meaningfully interpret those results in a way that is relevant for questions about knowledge representation and the learning process. Computational modeling is a powerful tool that can be used to understand linguistic development. The general approach presented here can be used to investigate any acquisition task and any learning strategy, provided both are precisely defined.

  16. NERSC-6 Workload Analysis and Benchmark Selection Process

    Energy Technology Data Exchange (ETDEWEB)

    Antypas, Katie; Shalf, John; Wasserman, Harvey

    2008-08-29

    This report describes efforts carried out during early 2008 to determine some of the science drivers for the"NERSC-6" next-generation high-performance computing system acquisition. Although the starting point was existing Greenbooks from DOE and the NERSC User Group, the main contribution of this work is an analysis of the current NERSC computational workload combined with requirements information elicited from key users and other scientists about expected needs in the 2009-2011 timeframe. The NERSC workload is described in terms of science areas, computer codes supporting research within those areas, and description of key algorithms that comprise the codes. This work was carried out in large part to help select a small set of benchmark programs that accurately capture the science and algorithmic characteristics of the workload. The report concludes with a description of the codes selected and some preliminary performance data for them on several important systems.

  17. NERSC-6 Workload Analysis and Benchmark Selection Process

    Energy Technology Data Exchange (ETDEWEB)

    Antypas, Katie; Shalf, John; Wasserman, Harvey

    2008-08-29

    This report describes efforts carried out during early 2008 to determine some of the science drivers for the"NERSC-6" next-generation high-performance computing system acquisition. Although the starting point was existing Greenbooks from DOE and the NERSC User Group, the main contribution of this work is an analysis of the current NERSC computational workload combined with requirements information elicited from key users and other scientists about expected needs in the 2009-2011 timeframe. The NERSC workload is described in terms of science areas, computer codes supporting research within those areas, and description of key algorithms that comprise the codes. This work was carried out in large part to help select a small set of benchmark programs that accurately capture the science and algorithmic characteristics of the workload. The report concludes with a description of the codes selected and some preliminary performance data for them on several important systems.

  18. Ground moving target processing for tracking selected targets

    Science.gov (United States)

    Nichols, Howard; Majumder, Uttam; Owirka, Gregory; Finn, Lucas

    2016-05-01

    BAE Systems has developed a baseline real-time selected vehicle (SV) radar tracking capability that successfully tracked multiple civilian vehicles in real-world traffic conditions within challenging semi-urban clutter. This real-time tracking capability was demonstrated in laboratory setting. Recent enhancements to the baseline capability include multiple detection modes, improvements to the system-level design, and a wide-area tracking mode. The multiple detection modes support two tracking regimes; wide-area and localized selected vehicle tracking. These two tracking regimes have distinct challenges that may be suited to different trackers. Incorporation of a wide-area tracking mode provides both situational awareness and the potential for enhancing SV track initiation. Improvements to the system-level design simplify the integration of multiple detection modes and more realistic SV track initiation capabilities. Improvements are designed to contribute to a comprehensive tracking capability that exploits a continuous stare paradigm. In this paper, focus will be on the challenges, design considerations, and integration of selected vehicle tracking.

  19. Processing of Feature Selectivity in Cortical Networks with Specific Connectivity.

    Directory of Open Access Journals (Sweden)

    Sadra Sadeh

    Full Text Available Although non-specific at the onset of eye opening, networks in rodent visual cortex attain a non-random structure after eye opening, with a specific bias for connections between neurons of similar preferred orientations. As orientation selectivity is already present at eye opening, it remains unclear how this specificity in network wiring contributes to feature selectivity. Using large-scale inhibition-dominated spiking networks as a model, we show that feature-specific connectivity leads to a linear amplification of feedforward tuning, consistent with recent electrophysiological single-neuron recordings in rodent neocortex. Our results show that optimal amplification is achieved at an intermediate regime of specific connectivity. In this configuration a moderate increase of pairwise correlations is observed, consistent with recent experimental findings. Furthermore, we observed that feature-specific connectivity leads to the emergence of orientation-selective reverberating activity, and entails pattern completion in network responses. Our theoretical analysis provides a mechanistic understanding of subnetworks' responses to visual stimuli, and casts light on the regime of operation of sensory cortices in the presence of specific connectivity.

  20. Substitution of Organic Solvents in Selected Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas; Rasmussen, Pia Brunn

    1997-01-01

    Volatile organic solvents (VOC)are becoming increasingly unwanted in industrial processes. Substitution of VOC with non-volatile, low-toxic compounds is a possibility to reduce VOC-use. It has been successfully demonstrated, that organic solvents used in cleaning processes in sheet offset printing......, and industrial coating processes are likely candidates for substitution of VOC with VOFA. Requirements to the resulting surfaces may, however, hinder the replacement. This is especially important when the surface has to be coated in a subsequent step....

  1. L'ajuda tutorial en els MOOCs: un nou enfocament en l'acció tutorial

    Directory of Open Access Journals (Sweden)

    Rosario Medina-Salguero

    2013-12-01

    Full Text Available En el present treball s'expon un analisis de l'accio tutorial en una nova modalitat d'ensenyança-aprenentage, els MOOCS. Per a açò, hem portat a veta un estudi de material documental que permet reconstruir els acontenyiments que estan succeint en l'actualitat en els MOOCS. Els resultats mos indiquen com se configura esta nova tendencia d'aprenentage a nivell internacional i nacional i com s'establix l'ajuda pedagogica en els MOOCS.

  2. Histogram bin width selection for time-dependent Poisson processes

    Energy Technology Data Exchange (ETDEWEB)

    Koyama, Shinsuke; Shinomoto, Shigeru [Department of Physics, Graduate School of Science, Kyoto University, Sakyo-ku, Kyoto 606-8502 (Japan)

    2004-07-23

    In constructing a time histogram of the event sequences derived from a nonstationary point process, we wish to determine the bin width such that the mean squared error of the histogram from the underlying rate of occurrence is minimized. We find that the optimal bin widths obtained for a doubly stochastic Poisson process and a sinusoidally regulated Poisson process exhibit different scaling relations with respect to the number of sequences, time scale and amplitude of rate modulation, but both diverge under similar parametric conditions. This implies that under these conditions, no determination of the time-dependent rate can be made. We also apply the kernel method to these point processes, and find that the optimal kernels do not exhibit any critical phenomena, unlike the time histogram method.

  3. Histogram bin width selection for time-dependent Poisson processes

    Science.gov (United States)

    Koyama, Shinsuke; Shinomoto, Shigeru

    2004-07-01

    In constructing a time histogram of the event sequences derived from a nonstationary point process, we wish to determine the bin width such that the mean squared error of the histogram from the underlying rate of occurrence is minimized. We find that the optimal bin widths obtained for a doubly stochastic Poisson process and a sinusoidally regulated Poisson process exhibit different scaling relations with respect to the number of sequences, time scale and amplitude of rate modulation, but both diverge under similar parametric conditions. This implies that under these conditions, no determination of the time-dependent rate can be made. We also apply the kernel method to these point processes, and find that the optimal kernels do not exhibit any critical phenomena, unlike the time histogram method.

  4. Self-Repair and Language Selection in Bilingual Speech Processing

    Directory of Open Access Journals (Sweden)

    Inga Hennecke

    2013-07-01

    Full Text Available In psycholinguistic research the exact level of language selection in bilingual lexical access is still controversial and current models of bilingual speech production offer conflicting statements about the mechanisms and location of language selection. This paper aims to provide a corpus analysis of self-repair mechanisms in code-switching contexts of highly fluent bilingual speakers in order to gain further insights into bilingual speech production. The present paper follows the assumptions of the Selection by Proficiency model, which claims that language proficiency and lexical robustness determine the mechanism and level of language selection. In accordance with this hypothesis, highly fluent bilinguals select languages at a prelexical level, which should influence the occurrence of self-repairs in bilingual speech. A corpus of natural speech data of highly fluent and balanced bilingual French-English speakers of the Canadian French variety Franco-Manitoban serves as the basis for a detailed analysis of different self-repair mechanisms in code-switching environments. Although the speech data contain a large amount of code-switching, results reveal that only a few speech errors and self-repairs occur in direct code-switching environments. A detailed analysis of the respective starting point of code-switching and the different repair mechanisms supports the hypothesis that highly proficient bilinguals do not select languages at the lexical level.Le niveau exact de la sélection des langues lors de l’accès lexical chez le bilingue reste une question controversée dans la recherche psycholinguistique. Les modèles actuels de la production verbale bilingue proposent des arguments contradictoires concernant le mécanisme et le lieu de la sélection des langues. La présente recherche vise à fournir une analyse de corpus mettant l’accent sur les mécanismes d’autoréparation dans le contexte d’alternance codique dans la production verbale

  5. Economic Comparison of Selected Processing Alternatives for Alfalfa

    OpenAIRE

    Bates, Dan J.

    1992-01-01

    Processing alfalfa for export is of significant interest to areas like Millard County, the largest hay-producing county in Utah. In the past year there have ix been significant reductions in the price of hay as a result of increased supplies in the central and western United States. This thesis analyzes the benefits and costs of processing alfalfa into cubes and recompressed bales in order to enter the export market. Costs of production were estimated through the use of enterprise budgets ...

  6. Chapter 2: selection process for nuclear sites; Capitulo 2: processo de selecao de sitios nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Atala, Drausio Lima

    2009-07-01

    The five criteria of a selection process will be discussed as follows: 1) Structure of the site selection procedure: functional stages required for discrimination from the interest region to installation license. 2) Selection criteria incorporating the nuclear regulatory, environmental and installation project requirements that should be considered in the selection process. 3) Quantification criterion: quantification of relative adequacy of a site related to selection criterion. 4) Weighing factor: weighing factor development reflecting the relative importance of individual criteria incorporating the interest composition among criterion. 5) Public involvement: development of a process integrating information and public enrollment participation.

  7. Determination of Properties of Selected Fresh and Processed Medicinal Plants

    Directory of Open Access Journals (Sweden)

    Shirley G. Cabrera

    2015-11-01

    Full Text Available The study aimed to determine the chemical properties, bioactive compounds, antioxidant activity and toxicity level of fresh and processed medicinal plants such as corn (Zea mays silk, pancitpancitan (Peperomiapellucida leaves, pandan (Pandanus amaryllifolius leaves, and commercially available tea. The toxicity level of the samples was measured using the Brine Shrimp Lethality Assay (BSLA. Statistical analysis was done using Statistical Package for Social Sciences (SPSS. Results showed that in terms of chemical properties there is significant difference between fresh and processed corn silk except in crude fiber content was noted. Based on proximate analyses of fresh and processed medicinal plants specifically in terms of % moisture, %crude protein and % total carbohydrates were also observed. In addition, there is also significant difference on bioactive compound contents such as total flavonoids and total phenolics between fresh and processed corn silk except in total vitamin E (TVE content. Pandan and pancit-pancitan showed significant difference in all bioactive compounds except in total antioxidant content (TAC. Fresh pancit-pancitan has the highest total phenolics content (TPC and TAC, while the fresh and processed corn silk has the lowest TAC and TVE content, respectively. Furthermore, results of BSLA for the three medicinal plants and commercially available tea extract showed after 24 hours exposure significant difference in toxicity level was observed. The percentage mortality increased with an increase in exposure time of the three medicinal plants and tea extract. The results of the study can served as baseline data for further processing and commercialization of these medicinal plants.

  8. Technology and manufacturing process selection the product life cycle perspective

    CERN Document Server

    Pecas, Paulo; Silva, Arlindo

    2014-01-01

    This book provides specific topics intending to contribute to an improved knowledge on Technology Evaluation and Selection in a Life Cycle Perspectives. Although each chapter will present possible approaches and solutions, there are no recipes for success. Each reader will find his/her balance in applying the different topics to his/her own specific situation. Case studies presented throughout will help in deciding what fits best to each situation, but most of all any ultimate success will come out of the interplay between the available solutions and the specific problem or opportunity the reader is faced with.

  9. TUTORIAL: Electrical resistance: an atomistic view

    Science.gov (United States)

    Datta, Supriyo

    2004-07-01

    This tutorial article presents a 'bottom-up' view of electrical resistance starting from something really small, like a molecule, and then discussing the issues that arise as we move to bigger conductors. Remarkably, no serious quantum mechanics is needed to understand electrical conduction through something really small, except for unusual things like the Kondo effect that are seen only for a special range of parameters. This article starts with energy level diagrams (section 2), shows that the broadening that accompanies coupling limits the conductance to a maximum of q2/h per level (sections 3, 4), describes how a change in the shape of the self-consistent potential profile can turn a symmetric current-voltage characteristic into a rectifying one (sections 5, 6), shows that many interesting effects in molecular electronics can be understood in terms of a simple model (section 7), introduces the non-equilibrium Green function (NEGF) formalism as a sophisticated version of this simple model with ordinary numbers replaced by appropriate matrices (section 8) and ends with a personal view of unsolved problems in the field of nanoscale electron transport (section 9). Appendix A discusses the Coulomb blockade regime of transport, while appendix B presents a formal derivation of the NEGF equations. MATLAB codes for numerical examples are listed in appendix C. (The appendices are available in the online version only.)

  10. Low temperature plasma biomedicine: A tutorial reviewa)

    Science.gov (United States)

    Graves, David B.

    2014-08-01

    Gas discharge plasmas formed at atmospheric pressure and near room temperature have recently been shown to be potentially useful for surface and wound sterilization, antisepsis, bleeding cessation, wound healing, and cancer treatment, among other biomedical applications. This tutorial review summarizes the field, stressing the likely role of reactive oxygen and nitrogen species created in these plasmas as the biologically and therapeutically active agents. Reactive species, including radicals and non-radical compounds, are generated naturally within the body and are now understood to be essential for normal biological functions. These species are known to be active agents in existing therapies for wound healing, infection control, and cancer treatment. But they are also observed at elevated levels in persons with many diseases and are associated with aging. The physical and chemical complexity of plasma medical devices and their associated biochemical effects makes the development of safe, effective plasma medical devices and procedures a challenge, but encouragingly rapid progress has been reported around the world in the last several years.

  11. Low temperature plasma biomedicine: A tutorial review

    Energy Technology Data Exchange (ETDEWEB)

    Graves, David B., E-mail: graves@berkeley.edu [University of California at Berkeley, Berkeley, California 94720 (United States)

    2014-08-15

    Gas discharge plasmas formed at atmospheric pressure and near room temperature have recently been shown to be potentially useful for surface and wound sterilization, antisepsis, bleeding cessation, wound healing, and cancer treatment, among other biomedical applications. This tutorial review summarizes the field, stressing the likely role of reactive oxygen and nitrogen species created in these plasmas as the biologically and therapeutically active agents. Reactive species, including radicals and non-radical compounds, are generated naturally within the body and are now understood to be essential for normal biological functions. These species are known to be active agents in existing therapies for wound healing, infection control, and cancer treatment. But they are also observed at elevated levels in persons with many diseases and are associated with aging. The physical and chemical complexity of plasma medical devices and their associated biochemical effects makes the development of safe, effective plasma medical devices and procedures a challenge, but encouragingly rapid progress has been reported around the world in the last several years.

  12. Mössbauer Spectroscopy Tutorial Book

    CERN Document Server

    Langouche, Guido

    2013-01-01

    Tutorials on Mössbauer Spectroscopy Since the discovery of the Mössbauer Effect many excellent books have been published for researchers and for doctoral and master level students.  However, there appears to be no textbook available for final year bachelor students, nor for people working in industry who have received only basic courses in classical mechanics, electromagnetism, quantum mechanics, chemistry and materials science.  The challenge of this book is to give an introduction to Mössbauer Spectroscopy for this level.  The ultimate goal of this book is to give this audience not only a scientific introduction to the technique, but also to demonstrate in an attractive way the power of Mössbauer Spectroscopy in many fields of science, in order to create interest among the readers in joining the community of Mössbauer spectroscopists.  This is particularly important at times where in many Mössbauer laboratories succession is at stake.

  13. Mass spectrometry in food proteomics: a tutorial.

    Science.gov (United States)

    Cunsolo, Vincenzo; Muccilli, Vera; Saletti, Rosaria; Foti, Salvatore

    2014-09-01

    In the last decades, the continuous and rapid evolution of proteomic approaches has provided an efficient platform for the characterization of food-derived proteins. Particularly, the impressive increasing in performance and versatility of the MS instrumentation has contributed to the development of new analytical strategies for proteins, evidencing how MS arguably represents an indispensable tool in food proteomics. Investigation of protein composition in foodstuffs is helpful for understanding the relationship between the protein content and the nutritional and technological properties of foods, the production of methods for food traceability, the assessment of food quality and safety, including the detection of allergens and microbial contaminants in foods, or even the characterization of genetically modified products. Given the high variety of the food-derived proteins and considering their differences in chemical and physical properties, a single proteomic strategy for all purposes does not exist. Rather, proteomic approaches need to be adapted to each analytical problem, and development of new strategies is necessary in order to obtain always the best results. In this tutorial, the most relevant aspects of MS-based methodologies in food proteomics will be examined, and their advantages and drawbacks will be discussed.

  14. Recently Published Lectures and Tutorials for ATLAS

    CERN Multimedia

    Herr, J.

    2006-01-01

    As reported in the September 2004 ATLAS eNews, the Web Lecture Archive Project, WLAP, a collaboration between the University of Michigan and CERN, has developed a synchronized system for recording and publishing educational multimedia presentations, using the Web as medium. This year, the University of Michigan team has been asked to record and publish all ATLAS Plenary sessions, as well as a large number of Physics and Computing tutorials. A significant amount of this material has already been published and can be accessed via the links below. The WLAP model is spreading. This summer, the CERN's High School Teachers program has used WLAP's system to record several physics lectures directed toward a broad audience. And a new project called MScribe, which is essentially the WLAP system coupled with an infrared tracking camera, is being used by the University of Michigan to record several University courses this academic year. All lectures can be viewed on any major platform with any common internet browser...

  15. Sequentially solution-processed, nanostructured polymer photovoltaics using selective solvents

    KAUST Repository

    Kim, Do Hwan

    2014-01-01

    We demonstrate high-performance sequentially solution-processed organic photovoltaics (OPVs) with a power conversion efficiency (PCE) of 5% for blend films using a donor polymer based on the isoindigo-bithiophene repeat unit (PII2T-C10C8) and a fullerene derivative [6,6]-phenyl-C[71]-butyric acid methyl ester (PC71BM). This has been accomplished by systematically controlling the swelling and intermixing processes of the layer with various processing solvents during deposition of the fullerene. We find that among the solvents used for fullerene deposition that primarily swell but do not re-dissolve the polymer underlayer, there were significant microstructural differences between chloro and o-dichlorobenzene solvents (CB and ODCB, respectively). Specifically, we show that the polymer crystallite orientation distribution in films where ODCB was used to cast the fullerene is broad. This indicates that out-of-plane charge transport through a tortuous transport network is relatively efficient due to a large density of inter-grain connections. In contrast, using CB results in primarily edge-on oriented polymer crystallites, which leads to diminished out-of-plane charge transport. We correlate these microstructural differences with photocurrent measurements, which clearly show that casting the fullerene out of ODCB leads to significantly enhanced power conversion efficiencies. Thus, we believe that tuning the processing solvents used to cast the electron acceptor in sequentially-processed devices is a viable way to controllably tune the blend film microstructure. © 2014 The Royal Society of Chemistry.

  16. The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

    Directory of Open Access Journals (Sweden)

    Ramlan Rohaizan

    2016-01-01

    Full Text Available Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP. The research was carried out in a quantitative method by distributing questionnaires to 50 SMEs food processing industries. The collected data analysed using Expert Choice software to rank the supplier selection criteria. The result shows that criteria for supplier selection are ranked by cost, quality, service, delivery and management and organisation while purchase cost, audit result, defect analysis, transportation cost and fast responsiveness are the first five sub-criteria. The result of this research intends to improve managerial capabilities of SMEs food processing industry in supplier selection.

  17. Development and application of microbial selective plugging processes

    Energy Technology Data Exchange (ETDEWEB)

    Jenneman, G.E. [Phillips Petroleum Co., Bartlesville, OK (United States); Gevertz, D.; Davey, M.E. [Agouron Institute, La Jolla, CA (United States)] [and others

    1995-12-31

    Phillips Petroleum Company recently completed a microbial selective plugging (MSP) pilot at the North Burbank Unit (NBU), Shidler, Oklahoma. Nutrients were selected for the pilot that could stimulate indigenous microflora in the reservoir brine to grow and produce exopolymer. It was found that soluble corn starch polymers (e.g., maltodextrins) stimulated the indigenous bacteria to produce exopolymer, whereas simple sugars (e.g., glucose and sucrose), as well as complex media (e.g., molasses and Nutrient Broth), did not. Injection of maltodextrin into rock cores in the presence of indigenous NBU bacteria resulted in stable permeability reductions (> 90%) across the entire length, while injection of glucose resulted only in face plugging. In addition, it was found that organic phosphate esters (OPE) served as a preferable source of phosphorus for the indigenous bacteria, since orthophosphates and condensed phosphates precipitated in NBU brine at reservoir temperature (45{degrees}C). Injection of maltodextrin and ethyl acid phosphate into a producing well stimulated an increase in maltodextrin utilizing bacteria (MUB) in the back-flowed, produced fluid. Additional screens of indigenous and nonindigenous bacteria yielded several nonindigenous isolates that could synthesize polymer when growing in brine containing 6% NaCl at 45{degrees}C.

  18. Module energy rating candidate reference days: Criteria and selection process

    Science.gov (United States)

    Myers, Daryl R.

    1999-03-01

    Presently the performance of flat-plate photovoltaic (PV) modules is based upon module power, open circuit voltage, short-circuit current, or peak power voltage and current with respect to fixed environmental conditions such as Standard Reporting Conditions, (SRC) or nominal operating cell temperature. These reporting conditions represent ideal conditions under which PV module performance (e.g., between manufacturers or technologies) may be compared. They result in overly optimistic expectations of performance by PV industry customers. A recommended practice for PV module energy-rating methodologies to relate PV module performance to real world conditions is under development. The methodologies will provide system designers and PV customers with an energy rating representative of real world conditions. The rating methodology reports energy production under 5 selected types of days representative of possible operational environments. The development and application of qualitative and quantitative criteria for identifying and selecting these representative days from the 30-year U.S. National Solar Radiation Data Base is described.

  19. A Subjective and Objective Process for Athletic Training Student Selection

    Science.gov (United States)

    Hawkins, Jeremy R.; McLoda, Todd A.; Stanek, Justin M.

    2015-01-01

    Context: Admission decisions are made annually concerning whom to accept into athletic training programs. Objective: To present an approach used to make admissions decisions at an undergraduate athletic training program and to corroborate this information by comparing each aspect to nursing program admission processes. Background: Annually,…

  20. Hierarchical zeolites and their catalytic performance in selective oxidative processes.

    Science.gov (United States)

    Ojeda, Manuel; Grau-Atienza, Aida; Campos, Rafael; Romero, Antonio A; Serrano, Elena; Maria Marinas, Jose; García Martínez, Javier; Luque, Rafael

    2015-04-24

    Hierarchical ZSM-5 zeolites prepared using a simple alkali treatment and subsequent HCl washing are found to exhibit unprecedented catalytic activities in selective oxidation of benzyl alcohol under microwave irradiation. The metal-free zeolites promote the microwave-assisted oxidation of benzyl alcohol with hydrogen peroxide in yields ranging from 45-35 % after 5 min of reaction under mild reaction conditions as well as the epoxidation of cyclohexene to valuable products (40-60 % conversion). The hierarchically porous systems also exhibited an interesting catalytic activity in the dehydration of N,N-dimethylformamide (25-30 % conversion), representing the first example of transition-metal free catalysts in this reaction.

  1. HotSwap for bioinformatics: A STRAP tutorial

    Directory of Open Access Journals (Sweden)

    Robinson Peter N

    2006-02-01

    Full Text Available Abstract Background Bioinformatics applications are now routinely used to analyze large amounts of data. Application development often requires many cycles of optimization, compiling, and testing. Repeatedly loading large datasets can significantly slow down the development process. We have incorporated HotSwap functionality into the protein workbench STRAP, allowing developers to create plugins using the Java HotSwap technique. Results Users can load multiple protein sequences or structures into the main STRAP user interface, and simultaneously develop plugins using an editor of their choice such as Emacs. Saving changes to the Java file causes STRAP to recompile the plugin and automatically update its user interface without requiring recompilation of STRAP or reloading of protein data. This article presents a tutorial on how to develop HotSwap plugins. STRAP is available at http://strapjava.de and http://www.charite.de/bioinf/strap. Conclusion HotSwap is a useful and time-saving technique for bioinformatics developers. HotSwap can be used to efficiently develop bioinformatics applications that require loading large amounts of data into memory.

  2. HotSwap for bioinformatics: a STRAP tutorial.

    Science.gov (United States)

    Gille, Christoph; Robinson, Peter N

    2006-02-09

    Bioinformatics applications are now routinely used to analyze large amounts of data. Application development often requires many cycles of optimization, compiling, and testing. Repeatedly loading large datasets can significantly slow down the development process. We have incorporated HotSwap functionality into the protein workbench STRAP, allowing developers to create plugins using the Java HotSwap technique. Users can load multiple protein sequences or structures into the main STRAP user interface, and simultaneously develop plugins using an editor of their choice such as Emacs. Saving changes to the Java file causes STRAP to recompile the plugin and automatically update its user interface without requiring recompilation of STRAP or reloading of protein data. This article presents a tutorial on how to develop HotSwap plugins. STRAP is available at http://strapjava.de and http://www.charite.de/bioinf/strap. HotSwap is a useful and time-saving technique for bioinformatics developers. HotSwap can be used to efficiently develop bioinformatics applications that require loading large amounts of data into memory.

  3. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...

  4. elative age effect in the selection process of handball players of the regional selection teams

    Directory of Open Access Journals (Sweden)

    Manuel Gómez López

    2017-06-01

    Full Text Available This study aimed to analyze the effect of age on adolescent handball players of the regional selection teams. To do this, data of sex and date of birth of 84 youth players from different regional selection teams in the 2015-2016 season were analyzed, performing comparisons and differences being studied by χ2 and Z tests and the Bonferroni method. The analysis of results by quarter and half of birth revealed no statistically significant differences in gender and category. It seems to confirm that there is not relative age effect in the analyzed Teams. Whereupon, seems to confirm that in handball base, all young people participate, regardless of the degree of maturity submit.

  5. Community Earth System Model (CESM) Tutorial 2016 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lamarque, Jean-Francois [Univ. Corporation for Atmospheric Research (UCAR) and National Center for Atmospheric Research (NCAR) and Climate and Global Dynamics Laboratory (CGD), Boulder, CO (United States)

    2017-05-09

    For the 2016 tutorial, NCAR/CGD requested a total budget of $70,000 split equally between DOE and NSF. The funds were used to support student participation (travel, lodging, per diem, etc.). Lectures and practical session support was primarily provided by local participants at no additional cost (see list below). The seventh annual Community Earth System Model (CESM) tutorial (2016) for students and early career scientists was held 8 – 12 August 2016. As has been the case over the last few years, this event was extremely successful and there was greater demand than could be met. There was continued interest in support of the NSF’s EaSM Infrastructure awards, to train these awardees in the application of the CESM. Based on suggestions from previous tutorial participants, the 2016 tutorial experience again provided direct connection to Yellowstone for each individual participant (rather than pairs), and used the NCAR Mesa Library. The 2016 tutorial included lectures on simulating the climate system and practical sessions on running CESM, modifying components, and analyzing data. These were targeted to the graduate student level. In addition, specific talks (“Application” talks) were introduced this year to provide participants with some in-depth knowledge of some specific aspects of CESM.

  6. Effect of heat processing on selected grain amaranth physicochemical properties.

    Science.gov (United States)

    Muyonga, John H; Andabati, Brian; Ssepuuya, Geoffrey

    2014-01-01

    Grain amaranth is a pseudocereal with unique agricultural, nutritional, and functional properties. This study was undertaken to determine the effect of different heat-processing methods on physicochemical and nutraceutical properties in two main grain amaranth species, of Amaranthus hypochondriacus L. and Amaranthus cruentus L. Grains were prepared by roasting and popping, milled and analyzed for changes in in vitro protein digestibility, gruel viscosity, pasting characteristics, antioxidant activity, flavonoids, and total phenolics. In vitro protein digestibility was determined using the pepsin-pancreatin enzyme system. Viscosity and pasting characteristics of samples were determined using a Brookfield Viscometer and a Rapid Visco Analyzer, respectively. The grain methanol extracts were analysed for phenolics using spectrophotometry while antioxidant activity was determined using the DPPH (2,2-diphenyl-1-picrylhydrazyl) method. Heat treatment led to a reduction in protein digestibility, the effect being higher in popped than in roasted samples. Viscosities for roasted grain amaranth gruels were significantly higher than those obtained from raw and popped grain amaranth gruels. The results for pasting properties were consistent with the results for viscosity. In both A. hypochondriacus L. and A. cruentus L., the order of the viscosity values was roasted>raw>popped. The viscosities were also generally lower for A. cruentus L. compared to A. hypochondriacus L. Raw samples for both A. hypochondriacus L. and A. cruentus L. did not significantly differ in total phenolic content (TPC), total flavonoid content (TFC), and total antioxidant activity values. Thermal processing led to an increase in TFC and antioxidant activity. However, TPC of heat-processed samples remained unchanged. From the results, it can be concluded that heat treatment enhances antioxidant activity of grain amaranth and causes rheological changes dependent on the nature of heat treatment.

  7. Occurrence of Aflatoxins in Selected Processed Foods from Pakistan

    Directory of Open Access Journals (Sweden)

    Muhammad Ashrafuzzaman

    2012-07-01

    Full Text Available A total of 125 (ready to eat processed food samples (70 intended for infant and 55 for adult intake belonging to 20 different food categories were analyzed for aflatoxins contamination using Reverse Phase High Performance Liquid Chromatography (RP-HPLC with fluorescent detection. A solvent mixture of acetonitrile-water was used for the extraction followed by immunoaffinity clean-up to enhance sensitivity of the method. The limit of detection (LOD (0.01–0.02 ng·g−1 and limit of quantification (LOQ (0.02 ng·g−1 was established for aflatoxins based on signal to noise ratio of 3:1 and 10:1, respectively. Of the processed food samples tested, 38% were contaminated with four types of aflatoxins, i.e., AFB1 (0.02–1.24 μg·kg−1, AFB2 (0.02–0.37 μg·kg−1, AFG1 (0.25–2.7 μg·kg−1 and AFG2 (0.21–1.3 μg·kg−1. In addition, the results showed that 21% of the processed foods intended for infants contained AFB1 levels higher than the European Union permissible limits (0.1 μg·kg−1, while all of those intended for adult consumption had aflatoxin contamination levels within the permitted limits.

  8. Selected studies in HTGR reprocessing development. [KA2C process

    Energy Technology Data Exchange (ETDEWEB)

    Notz, K.J.

    1976-03-01

    Recent work at ORNL on hot cell studies, off-gas cleanup, and waste handling is reviewed. The work includes small-scale burning tests with irradiated fuels to study fission product release, development of the KALC process for the removal of /sup 85/Kr from a CO/sub 2/ stream, preliminary work on a nonfluidized bed burner, solvent extraction studies including computer modeling, characterization of reprocessing wastes, and initiation of a development program for the fixation of /sup 14/C as CaCO/sub 3/. (auth)

  9. Evaluating Internet Health Information: A Tutorial from the National Library of Medicine

    Science.gov (United States)

    ... page: https://medlineplus.gov/webeval/webeval.html Evaluating Internet Health Information: A Tutorial from the National Library ... version of the tutorial for use when no Internet connection is available. Read the transcript of the ...

  10. Understanding Medical Words: A Tutorial from the National Library of Medicine

    Science.gov (United States)

    ... page: https://medlineplus.gov/medicalwords.html Understanding Medical Words: A Tutorial from the National Library of Medicine ... enable JavaScript. This tutorial teaches you about medical words. You'll learn about how to put together ...

  11. Modeling intermediate product selection under production and storage capacity limitations in food processing

    DEFF Research Database (Denmark)

    Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

    2009-01-01

    and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

  12. 25 CFR 122.5 - Selection/nomination process for committee members.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Selection/nomination process for committee members. 122.5... OF OSAGE JUDGMENT FUNDS FOR EDUCATION § 122.5 Selection/nomination process for committee members. (a... include a brief statement of interest and qualifications for serving on the committee. (b) Nominations...

  13. Tutorial on Atomic Oxygen Effects and Contamination

    Science.gov (United States)

    Miller, Sharon K.

    2017-01-01

    Atomic oxygen is the most predominant specie in low Earth orbit (LEO) and is contained in the upper atmosphere of many other planetary bodies. Formed by photo-dissociation of molecular oxygen, it is highly reactive and energetic enough to break chemical bonds on the surface of many materials and react with them to form either stable or volatile oxides. The extent of the damage for spacecraft depends a lot on how much atomic oxygen arrives at the surface, the energy of the atoms, and the reactivity of the material that is exposed to it. Oxide formation can result in shrinkage, cracking, or erosion which can also result in changes in optical, thermal, or mechanical properties of the materials exposed. The extent of the reaction can be affected by mechanical loading, temperature, and other environmental components such as ultraviolet radiation or charged particles. Atomic oxygen generally causes a surface reaction, but it can scatter under coatings and into crevices causing oxidation much farther into a spacecraft surface or structure than would be expected. Contamination can also affect system performance. Contamination is generally caused by arrival of volatile species that condense on spacecraft surfaces. The volatiles are typically a result of outgassing of materials that are on the spacecraft. Once the volatiles are condensed on a surface, they can then be fixed on the surface by ultraviolet radiation andor atomic oxygen reaction to form stable surface contaminants that can change optical and thermal properties of materials in power systems, thermal systems, and sensors. This tutorial discusses atomic oxygen erosion and contaminate formation, and the effect they have on typical spacecraft materials. Scattering of atomic oxygen, some effects of combined environments and examples of effects of atomic oxygen and contamination on spacecraft systems and components will also be presented.

  14. The GOCE User Toolbox (GUT) and Tutorial

    Science.gov (United States)

    Bingham, R. J.; Benveniste, J.; Knudsen, P.

    2015-12-01

    The GOCE User Toolbox (GUT) is an integrated suite of tools for the analysis and use of GOCE Level 2 gravity products. GUT supports applications in geodesy, oceanography and solid earth physics. The accompanying GUT tutorial provides information and guidance on how to use the toolbox for a variety of applications within each of these domains. An important motivation for the development of GUT has been the desire that users should be able to exploit the GOCE gravity products to calculate derived products relevant to their particular domains without necessarily needing to understand the technicalities of particular geodetic concepts and algorithms. As such, GUT is also suitable for use as an aid to the teaching of geophysics. A comprehensive and up-to-date set of a-priori data and models are supplied with the toolbox, together with a range of pre-defined workflows, allowing the user to immediately calculate useful geophysical quantities. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. GUT is cross-platform and may be used on Windows PCs, UNIX/Linux workstations and Macs. GUT version 2.2 was released in April 2014 and, besides some bug-fixes, the capability to calculate the simple Bouguer anomaly was added. Recently, GUT version 3 has been released. Through a collaborative effort between the relevant scientific communities, this version has built on earlier releases by further extending the functionality of the toolbox within the fields of geodesy, oceanography and solid earth physics. Additions include the ability to work directly with gravity gradients, anisotropic diffusive filtering, and the computation of Bouguer and isostatic gravity anomalies. The interface between the user and the toolbox has also been greatly improved and GUT version 3 now includes an attractive and intuitive Graphical User Interface. An associated GUT VCM tool for analysing the GOCE variance covariance matrices is also available.

  15. Selective imitation impairments differentially interact with language processing.

    Science.gov (United States)

    Mengotti, Paola; Corradi-Dell'Acqua, Corrado; Negri, Gioia A L; Ukmar, Maja; Pesavento, Valentina; Rumiati, Raffaella I

    2013-08-01

    Whether motor and linguistic representations of actions share common neural structures has recently been the focus of an animated debate in cognitive neuroscience. Group studies with brain-damaged patients reported association patterns of praxic and linguistic deficits whereas single case studies documented double dissociations between the correct execution of gestures and their comprehension in verbal contexts. When the relationship between language and imitation was investigated, each ability was analysed as a unique process without distinguishing between possible subprocesses. However, recent cognitive models can be successfully used to account for these inconsistencies in the extant literature. In the present study, in 57 patients with left brain damage, we tested whether a deficit at imitating either meaningful or meaningless gestures differentially impinges on three distinct linguistic abilities (comprehension, naming and repetition). Based on the dual-pathway models, we predicted that praxic and linguistic performance would be associated when meaningful gestures are processed, and would dissociate for meaningless gestures. We used partial correlations to assess the association between patients' scores while accounting for potential confounding effects of aspecific factors such age, education and lesion size. We found that imitation of meaningful gestures significantly correlated with patients' performance on naming and repetition (but not on comprehension). This was not the case for the imitation of meaningless gestures. Moreover, voxel-based lesion-symptom mapping analysis revealed that damage to the angular gyrus specifically affected imitation of meaningless gestures, independent of patients' performance on linguistic tests. Instead, damage to the supramarginal gyrus affected not only imitation of meaningful gestures, but also patients' performance on naming and repetition. Our findings clarify the apparent conflict between associations and dissociations

  16. Selective Hydrogen Transfer Reaction in FCC Process:Characterization and Application

    Institute of Scientific and Technical Information of China (English)

    Chen Beiyan; He Mingyuan; Da Zhijian

    2003-01-01

    The product distribution and gasoline quality of FCC process, especially the olefin content,heavily depends on the catalyst performance in terms of selective/non-selective hydrogen transfer reaction selectivity. A reliable experimental protocol has been established by using n-dodecane as a probe molecule to characterize the selective hydrogen transfer ability of catalytic materials. The results obtained have been correlated with the performance of the practical catalysts.

  17. The Web Lecture Archive Project: Archiving ATLAS Presentations and Tutorials

    CERN Multimedia

    Herr, J

    2004-01-01

    The geographical diversity of the ATLAS Collaboration presents constant challenges in the communication between and training of its members. One important example is the need for training of new collaboration members and/or current members on new developments. The Web Lecture Archive Project (WLAP), a joint project between the University of Michigan and CERN Technical Training, has addressed this challenge by recording ATLAS tutorials in the form of streamed "Web Lectures," consisting of synchronized audio, video and high-resolution slides, available on demand to anyone in the world with a Web browser. ATLAS software tutorials recorded by WLAP include ATHENA, ATLANTIS, Monte Carlo event generators, Object Oriented Analysis and Design, GEANT4, and Physics EDM and tools. All ATLAS talks, including both tutorials and meetings are available at http://www.wlap.org/browser.php?ID=atlas. Members of the University of Michigan Physics Department and Media Union, under the framework of the ATLAS Collaboratory Project ...

  18. Pedagogical Considerations in Developing an Online Tutorial in Information Literacy.

    Directory of Open Access Journals (Sweden)

    Therese Skagen

    2009-04-01

    Full Text Available The article discusses the pedagogical background on which the design of the online tutorial Søk & Skriv ('Search and Write' is based. The tutorial Søk & Skriv is specially designed for distance learning students, but can also be used by students on campus. Søk & Skriv aims at increasing students' information and digital literacy with the ultimate goal of empowering them to gradually become legitimate members of the academic community, as well as lifelong learners. Further, the tutorial sets out to make a contribution to the pedagogical development of user education at the academic library. The article shows how a general didactical model, namely the didactical relationship model (Hiim & Hippe, 1998, has been applied to enrich information literacy education practice, and in this case specifically, to enrich the design of online education.

  19. New series of ORACLE tutorials, March-June 2006

    CERN Multimedia

    Catherine Delamare

    2006-01-01

    The IT DES Oracle Support team is pleased to announce the new series of Oracle tutorials with the proposed schedule: Thursday 20 April - SQL I - Eva Dafonte Perez Thursday 27 April - SQL II - Lucia Moreno Lopez Thursday 4 May - Architecture - Montse Collados Thursday 11 May - Tuning - Michal Kwiatek Thursday 1 June - PL/SQL I - Eva Dafonte Perez Thursday 8 June - PL/SQL II - Nilo Segura Thursday 15 June - Oracle Tools and Bindings with languages - Eric Grancher, Nilo Segura These tutorials will take place in the IT Auditorium (bldg. 31/3-004) starting at 10:00. The average duration will be 1 hour plus time for questions. There is no need to register in advance. You can access the previous 2002-2003 sessions at http://it-des.web.cern.ch/IT-DES/DIS/oracle/tutorials.html If you need more information, please contact Catherine.Delamare@cern.ch

  20. New series of Oracle tutorials, May-June 2006

    CERN Multimedia

    2006-01-01

    The IT DES Oracle Support team is pleased to announce the new series of Oracle tutorials with the proposed schedule: Thursday 11 May Tuning - Michal Kwiatek Thursday 1 June PL/SQL I - Eva Dafonte Perez Thursday 8 June PL/SQL II - Nilo Segura Thursday 15 June Oracle Tools and Bindings with languages - Eric Grancher, Nilo Segura These tutorials will take place in the IT Auditorium (bldg. 31/3-004) starting at 10:00. The average duration will be 1 hour plus time for questions. There is no need to register in advance. You can access the previous 2002-2003 sessions at http://it-des.web.cern.ch/IT-DES/DIS/oracle/tutorials.html If you need more information, please contact Catherine.Delamare@cern.ch

  1. New series of ORACLE tutorials, March-June 2006

    CERN Multimedia

    Catherine Delamare

    2006-01-01

    The IT DES Oracle Support team is pleased to announce the new series of Oracle tutorials with the proposed schedule: Thursday 30 March - Design - Arash Khodabandeh Thursday 20 April - SQL I - Eva Dafonte Perez Thursday 27 April - SQL II - Lucia Moreno Lopez Thursday 4 May - Architecture - Montse Collados Thursday 11 May - Tuning - Michal Kwiatek Thursday 1 June - PL/SQL I - Eva Dafonte Perez Thursday 8 June - PL/SQL II - Nilo Segura Thursday 15 June - Oracle Tools and Bindings with languages - Eric Grancher, Nilo Segura These tutorials will take place in the IT Auditorium (bldg. 31/3-004) starting at 10:00. The average duration will be 1 hour plus time for questions. There is no need to register in advance. You can access the previous 2002-2003 sessions at http://it-des.web.cern.ch/IT-DES/DIS/oracle/tutorials.html If you need more information, please contact Catherine.Delamare@cern.ch

  2. Using Structure-Based Organic Chemistry Online Tutorials with Automated Correction for Student Practice and Review

    Science.gov (United States)

    O'Sullivan, Timothy P.; Hargaden, Gra´inne C.

    2014-01-01

    This article describes the development and implementation of an open-access organic chemistry question bank for online tutorials and assessments at University College Cork and Dublin Institute of Technology. SOCOT (structure-based organic chemistry online tutorials) may be used to supplement traditional small-group tutorials, thereby allowing…

  3. An Undergraduate Science Information Literacy Tutorial in a Web 2.0 World

    Science.gov (United States)

    Scaramozzino, Jeanine Marie

    2008-01-01

    The development of an interactive web-based science information literacy tutorial that introduces undergraduate science majors to basic components of scientific literature is described. The tutorial introduces concepts, vocabulary and resources necessary for understanding and accessing information. The tutorial content is based on the Association…

  4. The Relationship Between Attendance in Student-Centred Physics Tutorials and Performance in University Examinations

    Science.gov (United States)

    Sharma, Manjula D.; Mendez, Alberto; O'Byrne, John W.

    2005-01-01

    The School of Physics at the University of Sydney has introduced voluntary workshop tutorials in large first-year courses. The tutorials are based on informal cooperative groupings with structured worksheets and short hands-on activities. In this study we explore the relationship between attendance at the workshop tutorials and student performance…

  5. Using Structure-Based Organic Chemistry Online Tutorials with Automated Correction for Student Practice and Review

    Science.gov (United States)

    O'Sullivan, Timothy P.; Hargaden, Gra´inne C.

    2014-01-01

    This article describes the development and implementation of an open-access organic chemistry question bank for online tutorials and assessments at University College Cork and Dublin Institute of Technology. SOCOT (structure-based organic chemistry online tutorials) may be used to supplement traditional small-group tutorials, thereby allowing…

  6. A Study of the Feasibility of Network Tutorial System in Taiwan

    Science.gov (United States)

    Chiu, Jui-Man; Liu, Wei-Liang

    2008-01-01

    The reasons that the current tutorial system (CTS) does not produce significant effects include the budgets and policies of schools, the greater independence of students, and the infrequent interaction of tutors with students. To reduce the deficiencies of the current tutorial system, this paper proposes a network tutorial system (NTS) and…

  7. Category-selective attention modulates unconscious processes in the middle occipital gyrus.

    Science.gov (United States)

    Tu, Shen; Qiu, Jiang; Martens, Ulla; Zhang, Qinglin

    2013-06-01

    Many studies have revealed the top-down modulation (spatial attention, attentional load, etc.) on unconscious processing. However, there is little research about how category-selective attention could modulate the unconscious processing. In the present study, using functional magnetic resonance imaging (fMRI), the results showed that category-selective attention modulated unconscious face/tool processing in the middle occipital gyrus (MOG). Interestingly, MOG effects were of opposed direction for face and tool processes. During unconscious face processing, activation in MOG decreased under the face-selective attention compared with tool-selective attention. This result was in line with the predictive coding theory. During unconscious tool processing, however, activation in MOG increased under the tool-selective attention compared with face-selective attention. The different effects might be ascribed to an interaction between top-down category-selective processes and bottom-up processes in the partial awareness level as proposed by Kouider, De Gardelle, Sackur, and Dupoux (2010). Specifically, we suppose an "excessive activation" hypothesis.

  8. Creating online tutorials a practical guide for librarians

    CERN Document Server

    Gascho Rempel, Hannah

    2015-01-01

    Today’s students rely heavily on using electronic resources; they expect to be able to access library resources from any location and at any time of the day. More and more schools, from K-12 through graduate level universities, are offering online education, and libraries must be prepared to guide learners in how to use library resources when and where they are needed. Online tutorials are the library’s answer to providing this immediate instruction, and today’s learners are expecting to have these guides available. Many librarians don’t have the technical expertise needed to create online tutorials.

  9. Solidaridad en la relación tutorial

    Directory of Open Access Journals (Sweden)

    Arturo G Rillo

    Full Text Available Introducción. La tutoría académica concreta el proceso educativo sustentado en estándares de calidad, características y necesidades de aprendizaje del estudiante; se desenvuelve confrontando actividades pedagógicas y consolida solidaridades. En este contexto, el estudio se realizó con el propósito de realizar la analítica de la solidaridad que surge de la relación tutorial. Método. Desde el ámbito de la hermenéutica, se realizó un estudio en cuatro fases: analítica, comprensiva, reconstructiva, crítica. Se construyó el concepto de solidaridad en la relación tutorial con propuestas de Gadamer, Habermas, Adela Cortina y Edgar Morín. Las categorías de análisis fueron: construcción social del sentido en la relación tutorial, relación tutorial de naturaleza epistémica, compleja, infinita y cambiante; y práctica tutorial generadora de solidaridades. Resultados. La solidaridad como praxis humana orientada al cuidado del otro (Fürsorge promueve el encuentro con el estudiante. La tutoría académica regula la experiencia vital de la dualidad enseñar-aprender; articula la decisión del docente y alumno con la responsabilidad solidaria. El docente concreta un asentimiento aconsejado por la amistad de estar-ahí-con el estudiante, acompañándolo, posibilitando elecciones y decisiones entre posibilidades para una vida sustentable mediante la virtud de la phrónesis. Conclusiones. La solidaridad en la relación tutorial como horizonte de sentido engarza la cosmovisión del binomio docente-estudiante en la relación tutorial. Dado el vínculo social, se ubica en el escenario de la relación tutorial el sentido originario de la amistad y la solidaridad con los siguientes baremos: compasión, saber hacer, confidencialidad, confianza, conciencia de sí mismo y del otro, tacto, escucha atenta y solícita, comprensión del otro.

  10. Big Data Analytics and the Social Web. A Tutorial for the Social Scientist

    Directory of Open Access Journals (Sweden)

    Markus Schatten

    2015-10-01

    Full Text Available The social web or web 2.0 has become the biggest and most accessible repository of data about human (social behavior in history. Due to a knowledge gap between big data analytics and established social science methodology, this enormous source of information, has yet to be exploited for new and interesting studies in various social and humanities related fields. To make one step towards closing this gap, we provide a detailed step-by-step tutorial on some of the most important web mining and analytics methods on a real-world study of Croatia’s biggest political blogging site. The tutorial covers methods for data retrieval, data conversion, cleansing and organization, data analysis (natural language processing, social and conceptual network analysis as well as data visualization and interpretation. All tools that have been implemented for the sake of this study, data sets through the various steps as well as resulting visualizations have been published on-line and are free to use. The tutorial is not meant to be a comprehensive overview and detailed description of all possible ways of analyzing data from the social web, but using the steps outlined herein one can certainly reproduce the results of the study or use the same or similar methodology for other datasets. Results of the study show that a special kind of conceptual network generated by natural language processing of articles on the blogging site, namely a conceptual network constructed by the rule that two concepts (keywords are connected if they were extracted from the same article, seem to be the best predictor of the current political discourse in Croatia when compared to the other constructed conceptual networks. These results indicate that a comprehensive study has to be made to investigate this conceptual structure further with an accent on the dynamic processes that have led to the construction of the network.

  11. How to Archive CDF in PDS4: A Tutorial

    Science.gov (United States)

    Mafi, J. N.; King, T. A.; Kazden, D. P.; Joy, S. P.

    2016-12-01

    The Planetary Plasma Interactions (PPI) node of NASA's Planetary Data System (PDS) has over a year's worth of experience in archiving data from the MAVEN mission in PDS (using PDS4, PDS' new, XML-based metadata standard), and is currently developing PDS4 archive products for the ARTEMIS and Cassini missions as well. This experience has led to a set of well-defined processes and tools by which data in NASA's Common Data Format (CDF) may be prepared for inclusion in the PDS archive. First, CDF files should be prepared according to the CDF-A Specification (available at: http://ppi.pds.nasa.gov/doc/), which includes requirements on the CDF data structure which allow the data to be described using PDS metadata. Furthermore, the CDF metadata should comply with the ISTP/IACG (International Solar-Terrestrial Physics Science Initiative/Inter-Agency Consultative Group for Space Sciences) guidelines (http://spdf.gsfc.nasa.gov/istp_guide/istp_guide.html) published by NASA's Space Physics Data Facility (SPDF). Tools to verify CDF-A and ISTP/IACG compliance are available from PDS/PPI and SPDF, respectively. Meeting these requirements will allow CDF files to be described by using PDS4 (XML) labels. PPI has used igpp.docgen (http://release.igpp.ucla.edu/igpp/docgen/) to generate these PDS4 labels. igpp.docgen is a Java tool designed to generate documents based upon an Apache Velocity template. igpp.docgen also reads and returns metadata (attributes) and data information from the CDF file so that that information may be captured and included in the PDS4 label. This presentation will provide a tutorial of the processes, and tools used in preparing a CDF file for the PDS4 archive.

  12. Selection of Leading Industry in Anshun Experimental District Based on Analytic Hierarchy Process

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Analytic Hierarchy Process is selected according to the selection method of leading industries by both domestic and foreign scholars. Leading industries which can accelerate the overall economic development of Anshun Experimental District is taken as the target layer; and market demand, efficiency standards and local conditions are taken as the criterion layers, so as to construct the select model of leading industry and to choose the leading industry in Anshun Experimental District. Result shows that the priority order of the leading industry selection in Anshun Experimental District is as follows: tourism > pharmacy > transportation > energy > food processing > characteristic agriculture > package and printing > automobile industry > mining > electric engineering.

  13. Glass science tutorial: Lecture No. 7, Waste glass technology for Hanford

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, A.A.

    1995-07-01

    This paper presents the details of the waste glass tutorial session that was held to promote knowledge of waste glass technology and how this can be used at the Hanford Reservation. Topics discussed include: glass properties; statistical approach to glass development; processing properties of nuclear waste glass; glass composition and the effects of composition on durability; model comparisons of free energy of hydration; LLW glass structure; glass crystallization; amorphous phase separation; corrosion of refractories and electrodes in waste glass melters; and glass formulation for maximum waste loading.

  14. Rolling element bearing diagnostics—A tutorial

    Science.gov (United States)

    Randall, Robert B.; Antoni, Jérôme

    2011-02-01

    This tutorial is intended to guide the reader in the diagnostic analysis of acceleration signals from rolling element bearings, in particular in the presence of strong masking signals from other machine components such as gears. Rather than being a review of all the current literature on bearing diagnostics, its purpose is to explain the background for a very powerful procedure which is successful in the majority of cases. The latter contention is illustrated by the application to a number of very different case histories, from very low speed to very high speed machines. The specific characteristics of rolling element bearing signals are explained in great detail, in particular the fact that they are not periodic, but stochastic, a fact which allows them to be separated from deterministic signals such as from gears. They can be modelled as cyclostationary for some purposes, but are in fact not strictly cyclostationary (at least for localised defects) so the term pseudo-cyclostationary has been coined. An appendix on cyclostationarity is included. A number of techniques are described for the separation, of which the discrete/random separation (DRS) method is usually most efficient. This sometimes requires the effects of small speed fluctuations to be removed in advance, which can be achieved by order tracking, and so this topic is also amplified in an appendix. Signals from localised faults in bearings are impulsive, at least at the source, so techniques are described to identify the frequency bands in which this impulsivity is most marked, using spectral kurtosis. For very high speed bearings, the impulse responses elicited by the sharp impacts in the bearings may have a comparable length to their separation, and the minimum entropy deconvolution technique may be found useful to remove the smearing effects of the (unknown) transmission path. The final diagnosis is based on "envelope analysis" of the optimally filtered signal, but despite the fact that this

  15. Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2015-01-01

    Selective laser melting is yet to become a standardized industrial manufacturing technique. The process continues to suffer from defects such as distortions, residual stresses, localized deformations and warpage caused primarily due to the localized heating, rapid cooling and high temperature...... gradients that occur during the process. While process monitoring and control of selective laser melting is an active area of research, establishing the reliability and robustness of the process still remains a challenge.In this paper, a methodology for generating reliable, optimized scanning paths...... and process parameters for selective laser melting of a standard sample is introduced. The processing of the sample is simulated by sequentially coupling a calibrated 3D pseudo-analytical thermal model with a 3D finite element mechanical model.The optimized processing parameters are subjected to a Monte Carlo...

  16. Beyond the Letter of the Law: Accessibility, Universal Design, and Human-Centered Design in Video Tutorials

    Directory of Open Access Journals (Sweden)

    Amanda S. Clossen

    2014-05-01

    Full Text Available This article demonstrates how Universal and Human-Centered Design approaches can be applied to the process of library video tutorial creation in order to enhance accessibility. A series of questions that creators should consider in order to focus their design process is discussed. These questions break down various physical and cognitive limitations that users encounter, providing a framework for future video creation that is not dependent on specific software. By approaching accommodations more holistically, videos are created with accessibility in mind from their conception. Working toward the ideal of a video tutorial that is accessible to every user leads to the creation of more clearly worded, effective learning objects that are much more inclusive, making instructional concepts available to users of all abilities.

  17. Virtual tutorials, Wikipedia books, and multimedia-based teaching for blended learning support in a course on algorithms and data structures

    Science.gov (United States)

    Knackmuß, Jenny; Creutzburg, Reiner

    2014-02-01

    The aim of this paper is to describe the benefit and support of virtual tutorials, Wikipedia books and multimedia-based teaching in a course on Algorithms and Data Structures. We describe our work and experiences gained from using virtual tutorials held in Netucate iLinc sessions and the use of various multimedia and animation elements for the support of deeper understanding of the ordinary lectures held in the standard classroom on Algorithms and Data Structures for undergraduate computer sciences students. We will describe the benefits, form, style and contents of those virtual tutorials. Furthermore, we mention the advantage of Wikipedia books to support the blended learning process using modern mobile devices. Finally, we give some first statistical measures of improved student's scores after introducing this new form of teaching support.

  18. Development of a multimedia tutorial to educate how to assess the critical view of safety in laparoscopic cholecystectomy using expert review and crowd-sourcing.

    Science.gov (United States)

    Deal, Shanley B; Stefanidis, Dimitrios; Brunt, L Michael; Alseidi, Adnan

    2017-05-01

    We sought to determine the feasibility of developing a multimedia educational tutorial to teach learners to assess the critical view of safety using input from expert surgeons, non-surgeons and crowd-sourcing. We intended to develop a tutorial that would teach learners how to identify the basic anatomy and physiology of the gallbladder, identify the components of the critical view of safety criteria, and understand its significance for performing a safe gallbladder removal. Using rounds of assessment with experts, laypersons and crowd-workers we developed an educational video with improving comprehension after each round of revision. We demonstrate that the development of a multimedia educational tool to educate learners of various backgrounds is feasible using an iterative review process that incorporates the input of experts and crowd sourcing. When planning the development of an educational tutorial, a step-wise approach as described herein should be considered. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. IT vendor selection model by using structural equation model & analytical hierarchy process

    Science.gov (United States)

    Maitra, Sarit; Dominic, P. D. D.

    2012-11-01

    Selecting and evaluating the right vendors is imperative for an organization's global marketplace competitiveness. Improper selection and evaluation of potential vendors can dwarf an organization's supply chain performance. Numerous studies have demonstrated that firms consider multiple criteria when selecting key vendors. This research intends to develop a new hybrid model for vendor selection process with better decision making. The new proposed model provides a suitable tool for assisting decision makers and managers to make the right decisions and select the most suitable vendor. This paper proposes a Hybrid model based on Structural Equation Model (SEM) and Analytical Hierarchy Process (AHP) for long-term strategic vendor selection problems. The five steps framework of the model has been designed after the thorough literature study. The proposed hybrid model will be applied using a real life case study to assess its effectiveness. In addition, What-if analysis technique will be used for model validation purpose.

  20. A PATH INTEGRAL FORMULATION OF THE WRIGHT-FISHER PROCESS WITH GENIC SELECTION

    Science.gov (United States)

    SCHRAIBER, JOSHUA G.

    2014-01-01

    The Wright-Fisher process with selection is an important tool in population genetics theory. Traditional analysis of this process relies on the diffusion approximation. The diffusion approximation is usually studied in a partial differential equations framework. In this paper, I introduce a path integral formalism to study the Wright-Fisher process with selection and use that formalism to obtain a simple perturbation series to approximate the transition density. The perturbation series can be understood in terms of Feynman diagrams, which have a simple probabilistic interpretation in terms of selective events. The perturbation series proves to be an accurate approximation of the transition density for weak selection and is shown to be arbitrarily accurate for any selection coefficient. PMID:24269333

  1. Application developer's tutorial for the CSM testbed architecture

    Science.gov (United States)

    Underwood, Phillip; Felippa, Carlos A.

    1988-01-01

    This tutorial serves as an illustration of the use of the programmer interface on the CSM Testbed Architecture (NICE). It presents a complete, but simple, introduction to using both the GAL-DBM (Global Access Library-Database Manager) and CLIP (Command Language Interface Program) to write a NICE processor. Familiarity with the CSM Testbed architecture is required.

  2. Online Tutorials and Effective Information Literacy Instruction for Distance Learners

    Science.gov (United States)

    Gonzales, Brighid M.

    2014-01-01

    As Internet and computer technologies have evolved, libraries have incorporated these technologies into the delivery of information literacy instruction. Of particular benefit is the ability of online tutorials to deliver information literacy instruction to students not physically present on campus. A survey of library and information science…

  3. Tutorial: Calculating Percentile Rank and Percentile Norms Using SPSS

    Science.gov (United States)

    Baumgartner, Ted A.

    2009-01-01

    Practitioners can benefit from using norms, but they often have to develop their own percentile rank and percentile norms. This article is a tutorial on how to quickly and easily calculate percentile rank and percentile norms using SPSS, and this information is presented for a data set. Some issues in calculating percentile rank and percentile…

  4. Acquaintanceship, Familiarity, and Coordinated Laughter in Writing Tutorials

    Science.gov (United States)

    Thonus, Terese

    2008-01-01

    This study compared the frequency, structure, and purposes of laughter in writing tutorials between 46 acquainted and unacquainted tutor-student pairs. Of particular interest were instances of shared, or coordinated laughter, which took the form of sequenced, simultaneous, and extended laughter. Familiarity, viewed as a continuum, was also…

  5. Initiation of student-TA interactions in tutorials

    Directory of Open Access Journals (Sweden)

    Raymond A. Hodges

    2006-12-01

    Full Text Available At the University of Maryland we videotaped several semesters of tutorials as part of a large research project. A particular research task required us to locate examples of students calling the teaching assistants (TAs over for assistance with a physics question. To our surprise, examples of this kind of interaction were difficult to find. We undertook a systematic study of TA-student interactions in tutorial: In particular, how are the interactions initiated? Do the students call the TA over for help with a particular issue, does the TA stop by spontaneously, or does the worksheet require a discussion with the TA at that point? The initiation of the interaction is of particular interest because it provides evidence of the motivation for and purpose of the interaction. This paper presents the results of that systematic investigation. We discovered that the majority of student-TA interactions in tutorial are initiated by teaching assistants, confirmed our initial observation that relatively few interactions are initiated by students, and found, further, that even fewer interactions are worksheet initiated. Perhaps most importantly, we found that our sense of who initiates tutorial interactions—based on extensive but informal observations—is not necessarily accurate. We need systematic investigations to uncover the reality of our classroom experiences.

  6. Tutorials in Nanotechnology: Focus on Physical and Analytical Electrochemistry

    Science.gov (United States)

    2010-11-29

    Society in Vienna Austria on the 5th of October 2009. This symposium was part of a continuing series of symposia at Electrochemical Society meetings that...The symposium Tutorials in Nanotechnology: Focus on Physical and Analytical Electrochemistry was held at the 216th Meeting of the Electrochemical

  7. LHC@home online tutorial for Windows users - recording

    CERN Document Server

    CERN. Geneva

    2016-01-01

    A step-by-step online tutorial about LHC@home for Windows users by Karolina Bozek. It contains detailed instructions on how-to-join this volunteer computing project.  This 5' video is linked from http://lhcathome.web.cern.ch/join-us Also from the CDS e-learning category.

  8. LHC@home online tutorial for Linux users - recording

    CERN Document Server

    CERN. Geneva

    2016-01-01

    A step-by-step online tutorial for LHC@home by Karolina Bozek It contains detailed instructions for Linux users on how-to-join this volunteer computing project.  This 5' linked from http://lhcathome.web.cern.ch/join-us CLICK Here to see the commands to copy/paste for installing BOINC and the VirtualBox.

  9. pyro: Python-based tutorial for computational methods for hydrodynamics

    Science.gov (United States)

    Zingale, Michael

    2015-07-01

    pyro is a simple python-based tutorial on computational methods for hydrodynamics. It includes 2-d solvers for advection, compressible, incompressible, and low Mach number hydrodynamics, diffusion, and multigrid. It is written with ease of understanding in mind. An extensive set of notes that is part of the Open Astrophysics Bookshelf project provides details of the algorithms.

  10. Tutorial: Calculating Percentile Rank and Percentile Norms Using SPSS

    Science.gov (United States)

    Baumgartner, Ted A.

    2009-01-01

    Practitioners can benefit from using norms, but they often have to develop their own percentile rank and percentile norms. This article is a tutorial on how to quickly and easily calculate percentile rank and percentile norms using SPSS, and this information is presented for a data set. Some issues in calculating percentile rank and percentile…

  11. An interactive tutorial-based training technique for vertebral morphometry.

    Science.gov (United States)

    Gardner, J C; von Ingersleben, G; Heyano, S L; Chesnut, C H

    2001-01-01

    The purpose of this work was to develop a computer-based procedure for training technologists in vertebral morphometry. The utility of the resulting interactive, tutorial based training method was evaluated in this study. The training program was composed of four steps: (1) review of an online tutorial, (2) review of analyzed spine images, (3) practice in fiducial point placement and (4) testing. During testing, vertebral heights were measured from digital, lateral spine images containing osteoporotic fractures. Inter-observer measurement precision was compared between research technicians, and between technologists and radiologist. The technologists participating in this study had no prior experience in vertebral morphometry. Following completion of the online training program, good inter-observer measurement precision was seen between technologists, showing mean coefficients of variation of 2.33% for anterior, 2.87% for central and 2.65% for posterior vertebral heights. Comparisons between the technicians and radiologist ranged from 2.19% to 3.18%. Slightly better precision values were seen with height measurements compared with height ratios, and with unfractured compared with fractured vertebral bodies. The findings of this study indicate that self-directed, tutorial-based training for spine image analyses is effective, resulting in good inter-observer measurement precision. The interactive tutorial-based approach provides standardized training methods and assures consistency of instructional technique over time.

  12. Musculoskeletal ultrasound education: orthopaedic resident ability following a multimedia tutorial.

    Science.gov (United States)

    Piposar, Jonathan R; Easley, Mark; Nunley, James A; DeOrio, James K; Talusan, Paul G; Gubler, Kyle E; Reach, John S

    2015-01-01

    Musculoskeletal ultrasound (MSK-US) is a quick and effective imaging tool that can be utilized by orthopaedic surgeons to identify common musculoskeletal pathology such as ankle tendinopathy. This study evaluated the ability of 15 orthopaedic surgery residents to identify and measure ankle tendons after attending a multimedia tutorial on MSK-US. Afterwards, proficiency of usage was assessed by identification and quantification of three ankle tendons (Achilles, tibialis posterior, and flexor hallucis longus) in a cadaver limb. Resident comfort level and plan for future use were also assessed. After completing the tutorial, accuracy measuring the Achilles, tibialis posterior, and flexor hallucis longus tendons was 94.8%, 90.2%, and 90.1%, respectively. Resident comfort level improved from a level of 2.3 before the tutorial to 6.8 afterwards. Seventy-one percent of residents plan to use ultrasound in clinical practice. These results show that orthopaedic surgery residents can identify and assess tendon size via MSK-US with sufficient accuracy after a multimedia tutorial.

  13. The Effectiveness of Interactivity in Multimedia Software Tutorials

    Science.gov (United States)

    Whitman, Lisa

    2013-01-01

    Many people face the challenge of finding effective computer-based software instruction, including employees who must learn how to use software applications for their job and students of distance education classes. Therefore, it is important to conduct research on how computer-based multimedia software tutorials should be designed so they are as…

  14. Proposal for tutorial: Resilience in carrier Ethernet transport

    DEFF Research Database (Denmark)

    Berger, Michael Stübert; Wessing, Henrik; Ruepp, Sarah Renée

    2009-01-01

    This tutorial addresses how Carrier Ethernet technologies can be used in the transport network to provide resilience to the packet layer. Carrier Ethernet networks based on PBB-TE and T-MPLS/MPLS-TP are strong candidates for reliable transport of triple-play services. These technologies offer...

  15. Auto-Tutorial Instruction in Entomology: Principles of Entomology (Orders).

    Science.gov (United States)

    Minnick, D. R.; Steele, K. L.

    Auto-tutorial instruction was compared to traditional lecture instruction in a university entomology course. In seven consecutive terms, undergraduate students enrolled in an introductory entomology course were divided into two groups: Group I received only lecture instruction on insect orders, while Group II was dismissed for three consecutive…

  16. Position paper: Web tutorials and Information Literacy research

    DEFF Research Database (Denmark)

    Hyldegård, Jette

    2011-01-01

    Position paper on future research challenges regarding web tutorials with the aim of supporting and facilitating Information Literacy in an academic context. Presented and discussed at the workshop: Social media & Information Practices, track on Information literacy practices, University of Borås...

  17. Peer Discussions in Lecture-Based Tutorials in Introductory Physics

    Science.gov (United States)

    Leinonen, Risto; Asikainen, Mervi A.; Hirvonen, Pekka E.

    2017-01-01

    This study analyzes the types of peer discussion that occur during lecture-based tutorial sessions. It focuses in particular on whether discussions of this kind have certain characteristics that might indicate success in the post-testing phase. The data were collected during an introductory physics course. The main data set was gathered with the…

  18. Tutorial on nonlinear backstepping: Applications to ship control

    Directory of Open Access Journals (Sweden)

    Thor I. Fossen

    1999-04-01

    Full Text Available The theoretical foundation of nonlinear backstepping designs is presented in a tutorial setting. This includes a brief review of integral backstepping, extensions to SISO and MIMO systems in strict feedback form and physical motivated case studies. Parallels and differences to feedback linearization where it is shown how so-called "good nonlincarities" can be exploited in the design are also made.

  19. A Study of Sustainable Assessment Theory in Higher Education Tutorials

    Science.gov (United States)

    Beck, Robert J.; Skinner, William F.; Schwabrow, Lynsey A.

    2013-01-01

    A study of sustainable assessment theory in nine tutorial courses at four colleges demonstrated that three long-term learning outcomes improved: Independence, Intellectual Maturity and Creativity. Eight of 10 traits associated with these outcomes were validated through internal reliability, faculty and student rubrics, and faculty case studies…

  20. Identity and Knowledge Work in a University Tutorial

    Science.gov (United States)

    Krieg, Susan

    2010-01-01

    In the contemporary university the large classes associated with many core units mean that tutorials are often taken by many part-time sessional who are typically employed on a casual basis, paid an hourly rate and not paid to attend the lectures. Given this situation, unit coordinators are often responsible for another phase in curriculum…

  1. Position paper: Web tutorials and Information Literacy research

    DEFF Research Database (Denmark)

    Hyldegård, Jette

    2011-01-01

    Position paper on future research challenges regarding web tutorials with the aim of supporting and facilitating Information Literacy in an academic context. Presented and discussed at the workshop: Social media & Information Practices, track on Information literacy practices, University of Borås...

  2. Partnerships and Parents--Relationships in Tutorial Programmes

    Science.gov (United States)

    Layton, Delia; McKenna, Sioux

    2016-01-01

    The tutorial system is considered to be a useful pedagogical intervention to improve student retention, particularly in the context of a first-year student's experience of entering university. For these novice students to achieve academic success, it is important that they are given access to the subject-specific knowledge and practices in their…

  3. Software engineering techniques in design automation: a tutorial

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.J. II

    1977-04-18

    Several useful software engineering techniques, disciplines, and perspectives are related to typical software development problems in design automation. Specific examples from recent experience illustrate both beneficial and undesirable practices. Oriented toward managers and practicing software engineers, the tutorial discusses system structure, control and data structures, programing guidelines, work habits, testing, documentation, and operational maintenance. 10 figures.

  4. Best Practices for Creating an Online Tutorial: A Literature Review

    Science.gov (United States)

    Blummer, Barbara A.; Kritskaya, Olga

    2009-01-01

    In the digital era, information literacy skills enable users to locate and use online materials effectively. One persistent library service for libraries is providing skills training to students. This article traces the creation of online library instructional tutorials, currently referred to as digital learning objects, in academic libraries. It…

  5. Key Elements of the Tutorial Support Management Model

    Science.gov (United States)

    Lynch, Grace; Paasuke, Philip

    2011-01-01

    In response to an exponential growth in enrolments the "Tutorial Support Management" (TSM) model has been adopted by Open Universities Australia (OUA) after a two-year project on the provision of online tutor support in first year, online undergraduate units. The essential focus of the TSM model was the development of a systemic approach…

  6. Benefits from Taking a Private Tutorial Course for Exam Preparation?

    DEFF Research Database (Denmark)

    la Cour, Lisbeth; Milhøj, Anders

    In this paper we analyze the effects of taking an extra private tutorial course on the passing probability and the grade in a course in Macroeconomics at the Business Diploma study program at Copenhagen Business School. The topic is of interest as the students are not supposed to need such an ext...

  7. Benefits from Taking a Private Tutorial Course for Exam Preparation?

    DEFF Research Database (Denmark)

    la Cour, Lisbeth; Milhøj, Anders

    2015-01-01

    We analyze the effects of taking an extra private tutorial course on the passing probability and the grade in a course in Macroeconomics at the Business Diploma study program at Copenhagen Business School. The topic is of interest as the students are not supposed to need such an extra course in o...

  8. TUTORIAL: Towards adaptive classification for BCI

    Science.gov (United States)

    Shenoy, Pradeep; Krauledat, Matthias; Blankertz, Benjamin; Rao, Rajesh P. N.; Müller, Klaus-Robert

    2006-03-01

    Non-stationarities are ubiquitous in EEG signals. They are especially apparent in the use of EEG-based brain-computer interfaces (BCIs): (a) in the differences between the initial calibration measurement and the online operation of a BCI, or (b) caused by changes in the subject's brain processes during an experiment (e.g. due to fatigue, change of task involvement, etc). In this paper, we quantify for the first time such systematic evidence of statistical differences in data recorded during offline and online sessions. Furthermore, we propose novel techniques of investigating and visualizing data distributions, which are particularly useful for the analysis of (non-)stationarities. Our study shows that the brain signals used for control can change substantially from the offline calibration sessions to online control, and also within a single session. In addition to this general characterization of the signals, we propose several adaptive classification schemes and study their performance on data recorded during online experiments. An encouraging result of our study is that surprisingly simple adaptive methods in combination with an offline feature selection scheme can significantly increase BCI performance. .

  9. Application of PROMETHEE-GAIA method for non-traditional machining processes selection

    Directory of Open Access Journals (Sweden)

    Prasad Karande

    2012-10-01

    Full Text Available With ever increasing demand for manufactured products of hard alloys and metals with high surface finish and complex shape geometry, more interest is now being paid to non-traditional machining (NTM processes, where energy in its direct form is used to remove material from workpiece surface. Compared to conventional machining processes, NTM processes possess almost unlimited capabilities and there is a strong believe that use of NTM processes would go on increasing in diverse range of applications. Presence of a large number of NTM processes along with complex characteristics and capabilities, and lack of experts in NTM process selection domain compel for development of a structured approach for NTM process selection for a given machining application. Past researchers have already attempted to solve NTM process selection problems using various complex mathematical approaches which often require a profound knowledge in mathematics/artificial intelligence from the part of process engineers. In this paper, four NTM process selection problems are solved using an integrated PROMETHEE (preference ranking organization method for enrichment evaluation and GAIA (geometrical analysis for interactive aid method which would act as a visual decision aid to the process engineers. The observed results are quite satisfactory and exactly match with the expected solutions.

  10. Random Gaussian process effect upon selective system of spectra heterodyne analyzer

    Directory of Open Access Journals (Sweden)

    N. F. Vollerner

    1967-12-01

    Full Text Available The formula is obtained that describe mean power changing the selective system output by changing speed tuning of the spectra heterodyne analyzer when searching random stationary processes.

  11. Methodology for Selection of Non-Restored Reserved Systems Pertaining to Control of Technological Processes

    Directory of Open Access Journals (Sweden)

    V. A. Anischenko

    2008-01-01

    Full Text Available The paper contains analysis of reliability of non-restored passive reserved systems pertaining to control of technological processes. Criteria have been justified and methodology for optimum selection of reserved systems has been developed.

  12. A recruitment and selection process model: the case of the Department of Justice and Constitutional Development

    OpenAIRE

    Thebe, T P; 12330841 - Van der Waldt, Gerrit

    2014-01-01

    The purpose of this article is to report on findings of an empirical investigation conducted at the Department of Justice and Constitutional Development. The aim of the investigation was to ascertain the status of current practices and challenges regarding the processes and procedures utilised for recruitment and selection. Based on these findings the article further outlines the design of a comprehensive process model for human resource recruitment and selection for the Department. The model...

  13. Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2015-01-01

    to generate optimized cellular scanning strategies and processing parameters, with an objective of reducing thermal asymmetries and mechanical deformations. The optimized scanning strategies are used for selective laser melting of the standard samples, and experimental and numerical results are compared....... gradients that occur during the process. While process monitoring and control of selective laser melting is an active area of research, establishing the reliability and robustness of the process still remains a challenge.In this paper, a methodology for generating reliable, optimized scanning paths...

  14. Effects of hyperbaric nitrogen-induced narcosis on response-selection processes.

    Science.gov (United States)

    Meckler, Cédric; Blatteau, Jean-Eric; Hasbroucq, Thierry; Schmid, Bruno; Risso, Jean-Jacques; Vidal, Franck

    2014-01-01

    Certain underwater circumstances carry risk of inert gas narcosis. Impairment of sensorimotor information processing due to narcosis, induced by normobaric nitrous oxide or high partial nitrogen pressure, has been broadly evidenced, by a lengthening of the reaction time (RT). However, the locus of this effect remains a matter of debate. We examined whether inert gas narcosis affects the response-selection stage of sensorimotor information processing. We compared an air normobaric condition with a hyperbaric condition in which 10 subjects were subjected to 6 absolute atmospheres of 8.33% O2 Nitrox. In both conditions, subjects performed a between-hand choice-RT task in which we explicitly manipulated the stimulus-response association rule. The effect of this manipulation (which is supposed to affect response-selection processes) was modified by inert gas narcosis. It is concluded, therefore, that response selection processes are among the loci involved in the effect of inert gas narcosis on information processing.

  15. EQUAL EMPLOYMENT OPPORTUNITIES IN THE RECRUITMENT AND SELECTION PROCESS OF HUMAN RESOURCES

    Directory of Open Access Journals (Sweden)

    Aleksandra Stoilkovska

    2015-12-01

    Full Text Available The aim of this article is to examine the problem of the concept of equal employment opportunities in the HR recruitment and selection process. Due to the fact that in these processes, both the HR managers and the applicants are involved, this research is conducted separately among them. Thus, it will be determined if both sides share the same opinion with respect to the existence of this concept in the mentioned processes. Providing equal employment opportunities is crucial for any company and represents a key for selecting the real employees. Therefore, the research includes the existence of prejudices in the recruitment and selection process such as discrimination based on national and social origin, gender and sexual orientation, age, political affiliation etc. As an essential part of this concept, the legislation in the Republic of Macedonia and its impact in the process of generating equal opportunities will be considered.

  16. THE PROGRAMMING NEURO-LINGUISTICS AND THEIR APPLICABILITY IN THE PROCESS OF RECRUITMENT AND SELECTION

    Directory of Open Access Journals (Sweden)

    Gilma Álamo Sánchez

    2008-04-01

    Full Text Available He/she is carried out a study referred to tools of Programming Neuro-linguistics (PNL for the Selection, Employment and Training that allow choosing the appropriate personnel taking the language and the behavior as a result. For their development theories were revised referred to the PNL and the recruitment process and selection sustained in the process of the interview. The summations are oriented to the importance and convenience for the Management of Human resources of applying the Programming Neuro-linguistics as selection tool of personal. Finally it is recommended to apply the proposal inside the mark of adaptability according to the necessities and demands of each organization.

  17. Mesh Processing in Medical-Image Analysis-a Tutorial

    DEFF Research Database (Denmark)

    Levine, Joshua A.; Paulsen, Rasmus Reinhold; Zhang, Yongjie

    2012-01-01

    Medical-image analysis requires an understanding of sophisticated scanning modalities, constructing geometric models, building meshes to represent domains, and downstream biological applications. These four steps form an image-to-mesh pipeline. For research in this field to progress, the imaging...

  18. Electroencephalogram processing in Motor Imagery Based BCI: A tutorial

    NARCIS (Netherlands)

    Garcia Molina, G.

    2008-01-01

    Brain-computer interfaces (BCIs) have been emerging during the last twenty years, as plausible alternatives for offering communication and control to physically challenged people. Yet, the idea of achieving control by simply thinking is appealing to a wider range of users. Availability, lower cost,

  19. A Tutorial for Building CMMI Process Performance Models

    Science.gov (United States)

    2010-04-26

    Full 8.84501 Reduce ·Square (U) 0 se · Converged by Gradient ·~ Lack Of Fit Source DF -Log l ikelihood ChiSquare Lack Of Fit 348 8.8450140...Stoddard and Dave Zubrow © 2010 Carnegie Mellon University •r Parameter Estimates Term Estimate Std Error ChiSquare rob>ChiSq lntercept[1...UnresolvedDevQuestionsAtCoding SSTC 2010 193 Robert Stoddard and Dave Zubrow © 2010 Carnegie Mellon University •r Parameter Estimates Term Estimate Std Error ChiSquare Prob

  20. The Mixed Waste Management Facility: Technology selection and implementation plan, Part 2, Support processes

    Energy Technology Data Exchange (ETDEWEB)

    Streit, R.D.; Couture, S.A.

    1995-03-01

    The purpose of this document is to establish the foundation for the selection and implementation of technologies to be demonstrated in the Mixed Waste Management Facility, and to select the technologies for initial pilot-scale demonstration. Criteria are defined for judging demonstration technologies, and the framework for future technology selection is established. On the basis of these criteria, an initial suite of technologies was chosen, and the demonstration implementation scheme was developed. Part 1, previously released, addresses the selection of the primary processes. Part II addresses process support systems that are considered ``demonstration technologies.`` Other support technologies, e.g., facility off-gas, receiving and shipping, and water treatment, while part of the integrated demonstration, use best available commercial equipment and are not selected against the demonstration technology criteria.

  1. SELECTION OF NON-CONVENTIONAL MACHINING PROCESSES USING THE OCRA METHOD

    Directory of Open Access Journals (Sweden)

    Miloš Madić

    2015-04-01

    Full Text Available Selection of the most suitable nonconventional machining process (NCMP for a given machining application can be viewed as multi-criteria decision making (MCDM problem with many conflicting and diverse criteria. To aid these selection processes, different MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. operational competitiveness ratings analysis (OCRA method for solving the NCMP selection problems. Applicability, suitability and computational procedure of OCRA method have been demonstrated while solving three case studies dealing with selection of the most suitable NCMP. In each case study the obtained rankings were compared with those derived by the past researchers using different MCDM methods. The results obtained using the OCRA method have good correlation with those derived by the past researchers which validate the usefulness of this method while solving complex NCMP selection problems.

  2. Evaluating Acoustic Emission Signals as an in situ process monitoring technique for Selective Laser Melting (SLM)

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, Karl A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Candy, Jim V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Guss, Gabe [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mathews, M. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-14

    In situ real-time monitoring of the Selective Laser Melting (SLM) process has significant implications for the AM community. The ability to adjust the SLM process parameters during a build (in real-time) can save time, money and eliminate expensive material waste. Having a feedback loop in the process would allow the system to potentially ‘fix’ problem regions before a next powder layer is added. In this study we have investigated acoustic emission (AE) phenomena generated during the SLM process, and evaluated the results in terms of a single process parameter, of an in situ process monitoring technique.

  3. Engineering development of selective agglomeration: Task 5, Bench- scale process testing

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Under the overall objectives of DOE Contract Engineering Development of Selective Agglomeration,'' there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

  4. Engineering development of selective agglomeration: Task 5, Bench- scale process testing

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Under the overall objectives of DOE Contract ``Engineering Development of Selective Agglomeration,`` there were a number of specific objectives in the Task 5 program. The prime objectives of Task 5 are highlighted below: (1) Maximize process performance in pyritic sulfur rejection and BTU recovery, (2) Produce a low ash product, (3) Compare the performance of the heavy agglomerant process based on diesel and the light agglomerant process using heptane, (4) Define optimum processing conditions for engineering design, (5) Provide first-level evaluation of product handleability, and (6) Explore and investigate process options/ideas which may enhance process performance and/or product handleability.

  5. Sensory evaluation based fuzzy AHP approach for material selection in customized garment design and development process

    Science.gov (United States)

    Hong, Y.; Curteza, A.; Zeng, X.; Bruniaux, P.; Chen, Y.

    2016-06-01

    Material selection is the most difficult section in the customized garment product design and development process. This study aims to create a hierarchical framework for material selection. The analytic hierarchy process and fuzzy sets theories have been applied to mindshare the diverse requirements from the customer and inherent interaction/interdependencies among these requirements. Sensory evaluation ensures a quick and effective selection without complex laboratory test such as KES and FAST, using the professional knowledge of the designers. A real empirical application for the physically disabled people is carried out to demonstrate the proposed method. Both the theoretical and practical background of this paper have indicated the fuzzy analytical network process can capture expert's knowledge existing in the form of incomplete, ambiguous and vague information for the mutual influence on attribute and criteria of the material selection.

  6. Unraveling the sub-processes of selective attention: insights from dynamic modeling and continuous behavior.

    Science.gov (United States)

    Frisch, Simon; Dshemuchadse, Maja; Görner, Max; Goschke, Thomas; Scherbaum, Stefan

    2015-11-01

    Selective attention biases information processing toward stimuli that are relevant for achieving our goals. However, the nature of this bias is under debate: Does it solely rely on the amplification of goal-relevant information or is there a need for additional inhibitory processes that selectively suppress currently distracting information? Here, we explored the processes underlying selective attention with a dynamic, modeling-based approach that focuses on the continuous evolution of behavior over time. We present two dynamic neural field models incorporating the diverging theoretical assumptions. Simulations with both models showed that they make similar predictions with regard to response times but differ markedly with regard to their continuous behavior. Human data observed via mouse tracking as a continuous measure of performance revealed evidence for the model solely based on amplification but no indication of persisting selective distracter inhibition.

  7. Implementation of a web-based, interactive polytrauma tutorial in computed tomography for radiology residents: How we do it

    Energy Technology Data Exchange (ETDEWEB)

    Schlorhaufer, C., E-mail: Schlorhaufer.Celia@mh-hannover.de [Department of Diagnostic and Interventional Radiology, Hannover Medical School, Carl-Neuberg-Str. 1, 30625 Hannover (Germany); Behrends, M., E-mail: behrends.marianne@mh-hannover.de [Peter L. Reichertz Department of Medical Informatics, Hannover Medical School, Carl-Neuberg-Str. 1, 30625 Hannover (Germany); Diekhaus, G., E-mail: Diekhaus.Gesche@mh-hannover.de [Department of Diagnostic and Interventional Radiology, Hannover Medical School, Carl-Neuberg-Str. 1, 30625 Hannover (Germany); Keberle, M., E-mail: m.keberle@bk-paderborn.de [Department of Diagnostic and Interventional Radiology, Brüderkrankenhaus St. Josef Paderborn, Husener Str. 46, 33098 Paderborn (Germany); Weidemann, J., E-mail: Weidemann.Juergen@mh-hannover.de [Department of Diagnostic and Interventional Radiology, Hannover Medical School, Carl-Neuberg-Str. 1, 30625 Hannover (Germany)

    2012-12-15

    Purpose: Due to the time factor in polytraumatized patients all relevant pathologies in a polytrauma computed tomography (CT) scan have to be read and communicated very quickly. During radiology residency acquisition of effective reading schemes based on typical polytrauma pathologies is very important. Thus, an online tutorial for the structured diagnosis of polytrauma CT was developed. Materials and methods: Based on current multimedia theories like the cognitive load theory a didactic concept was developed. As a web-environment the learning management system ILIAS was chosen. CT data sets were converted into online scrollable QuickTime movies. Audiovisual tutorial movies with guided image analyses by a consultant radiologist were recorded. Results: The polytrauma tutorial consists of chapterized text content and embedded interactive scrollable CT data sets. Selected trauma pathologies are demonstrated to the user by guiding tutor movies. Basic reading schemes are communicated with the help of detailed commented movies of normal data sets. Common and important pathologies could be explored in a self-directed manner. Conclusions: Ambitious didactic concepts can be supported by a web based application on the basis of cognitive load theory and currently available software tools.

  8. Quimiometria I: calibração multivariada, um tutorial Chemometrics I: multivariate calibration, a tutorial

    Directory of Open Access Journals (Sweden)

    Márcia M. C. Ferreira

    1999-09-01

    Full Text Available The aim of this work is to present a tutorial on Multivariate Calibration, a tool which is nowadays necessary in basically most laboratories but very often misused. The basic concepts of preprocessing, principal component analysis (PCA, principal component regression (PCR and partial least squares (PLS are given. The two basic steps on any calibration procedure: model building and validation are fully discussed. The concepts of cross validation (to determine the number of factors to be used in the model, leverage and studentized residuals (to detect outliers for the validation step are given. The whole calibration procedure is illustrated using spectra recorded for ternary mixtures of 2,4,6 trinitrophenolate, 2,4 dinitrophenolate and 2,5 dinitrophenolate followed by the concentration prediction of these three chemical species during a diffusion experiment through a hydrophobic liquid membrane. MATLAB software is used for numerical calculations. Most of the commands for the analysis are provided in order to allow a non-specialist to follow step by step the analysis.

  9. The Lore of Admissions Policies: Contrasting Formal and Informal Understandings of the Residency Selection Process

    Science.gov (United States)

    Ginsburg, Shiphra; Schreiber, Martin; Regehr, Glenn

    2004-01-01

    Purpose: The selection process for residency positions is sometimes seen as being "opaque'' and unfair by students, and can be a significant source of student stress. Yet efforts to clarify the process may not have helped reduce student stress for a number of reasons. This paper examines the nature of the knowledge that students possess and…

  10. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-01-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  11. HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

    Directory of Open Access Journals (Sweden)

    Ali Soltani

    2011-06-01

    Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

  12. Acute effects of caffeine on selective attention and visual search processes

    NARCIS (Netherlands)

    Lorist, M.M.; Snel, J.; Kok, A; Mulder, G.

    1996-01-01

    The influence of a single dose of caffeine was evaluated in focused and divided attention conditions of a visual selective search task in which subjects had to perform controlled search processes to locate a target item. Search processes were manipulated by varying display load. A dose of 3 mg/kg bo

  13. Acute effects of caffeine on selective attention and visual search processes

    NARCIS (Netherlands)

    Lorist, M.M.; Snel, J.; Kok, A; Mulder, G.

    The influence of a single dose of caffeine was evaluated in focused and divided attention conditions of a visual selective search task in which subjects had to perform controlled search processes to locate a target item. Search processes were manipulated by varying display load. A dose of 3 mg/kg

  14. A process for selection and training of super-users for ERP implementation projects

    DEFF Research Database (Denmark)

    Danielsen, Peter; Sandfeld Hansen, Kenneth; Helt, Mads

    2017-01-01

    -users in practice. To address this research gap, we analyze the case of an ERP implementation program at a large manufacturing company. We combine Katz’s widely accepted skill measurement model with the process observed in practice to describe and test a model of super-user selection and training. The resulting...... model contains a systematic process of super-user development and highlights the specific skillsets required in different phases of the selection and training process. Our results from a comparative assessment of management expectations and super-user skills in the ERP program show that the model can...

  15. An ontological knowledge based system for selection of process monitoring and analysis tools

    DEFF Research Database (Denmark)

    Singh, Ravendra; Gernaey, Krist; Gani, Rafiqul

    2010-01-01

    monitoring and analysis tools for a wide range of operations has made their selection a difficult, time consuming and challenging task. Therefore, an efficient and systematic knowledge base coupled with an inference system is necessary to support the optimal selection of process monitoring and analysis tools......, satisfying the process and user constraints. A knowledge base consisting of the process knowledge as well as knowledge on measurement methods and tools has been developed. An ontology has been designed for knowledge representation and management. The developed knowledge base has a dual feature. On the one...... procedures has been developed to retrieve the data/information stored in the knowledge base....

  16. Direct Slicing Based on Material Performance and Process Parameters for Selective Laser Sintering

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Direct slicing from CAD models to generate sectional contours of thepart to be sintered for Selective Laser Sintering (SLS) may overcome inherent disadvantages of using a Stereo Lithography ( STL ) format. In this paper, a direct slicing procedure is proposed for Selective Laser Sintering based on material performance and process parameters. Slicing thickness depends on the 3 D geometric model,material performance and process parameters. The relationship among material performance, process parameters and the largest slicing thickness is established using analysis of a sintering temperature field. A dynamic linked library is developed to realize direct slicing from a CAD model.

  17. A process for selection and training of super-users for ERP implementation projects

    DEFF Research Database (Denmark)

    Danielsen, Peter; Sandfeld Hansen, Kenneth; Helt, Mads

    2017-01-01

    The concept of super-users as a means to facilitate ERP implementation projects has recently taken a foothold in practice, but is still largely overlooked in research. In particular, little is known about the selection and training processes required to successfully develop skilled super......-users in practice. To address this research gap, we analyze the case of an ERP implementation program at a large manufacturing company. We combine Katz’s widely accepted skill measurement model with the process observed in practice to describe and test a model of super-user selection and training. The resulting...... model contains a systematic process of super-user development and highlights the specific skillsets required in different phases of the selection and training process. Our results from a comparative assessment of management expectations and super-user skills in the ERP program show that the model can...

  18. Relations between frequency selectivity, temporal fine-structure processing, and speech reception in impaired hearing

    DEFF Research Database (Denmark)

    Strelcyk, Olaf; Dau, Torsten

    2009-01-01

    and binaural TFS-processing deficits in the HI listeners, no relation was found between TFS processing and frequency selectivity. The effect of noise on TFS processing was not larger for the HI listeners than for the NH listeners. Finally, TFS-processing performance was correlated with speech reception......Frequency selectivity, temporal fine-structure (TFS) processing, and speech reception were assessed for six normal-hearing (NH) listeners, ten sensorineurally hearing-impaired (HI) listeners with similar high-frequency losses, and two listeners with an obscure dysfunction (OD). TFS processing...... was investigated at low frequencies in regions of normal hearing, through measurements of binaural masked detection, tone lateralization, and monaural frequency modulation (FM) detection. Lateralization and FM detection thresholds were measured in quiet and in background noise. Speech reception thresholds were...

  19. Computer-aided tool for solvent selection in pharmaceutical processes: Solvent swap

    DEFF Research Database (Denmark)

    Papadakis, Emmanouil; K. Tula, Anjan; Gernaey, Krist V.

    In the pharmaceutical processes, solvents have a multipurpose role since different solvents can be used in different stages (such as chemical reactions, separations and purification) in the multistage active pharmaceutical ingredients (APIs) production process. The solvent swap and selection task......-aided framework with the objective to assist the pharmaceutical industry in gaining better process understanding. A software interface to improve the usability of the tool has been created also....

  20. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  1. Selection of process alternatives for lignocellulosic bioethanol production using a MILP approach.

    Science.gov (United States)

    Scott, Felipe; Venturini, Fabrizio; Aroca, Germán; Conejeros, Raúl

    2013-11-01

    This work proposes a decision-making framework for the selection of processes and unit operations for lignocellulosic bioethanol production. Process alternatives are described by its capital and operating expenditures, its contribution to process yield and technological availability information. A case study in second generation ethanol production using Eucalyptus globulus as raw material is presented to test the developed process synthesis tool. Results indicate that production cost does not necessarily decrease when yield increases. Hence, optimal processes can be found at the inflexion point of total costs and yield. The developed process synthesis tool provides results with an affordable computational cost, existing optimization tools and an easy-to-upgrade description of the process alternatives. These features made this tool suitable for process screening when incomplete information regarding process alternatives is available.

  2. Tutorial on the Psychophysics and Technology of Virtual Acoustic Displays

    Science.gov (United States)

    Wenzel, Elizabeth M.; Null, Cynthia (Technical Monitor)

    1998-01-01

    Virtual acoustics, also known as 3-D sound and auralization, is the simulation of the complex acoustic field experienced by a listener within an environment. Going beyond the simple intensity panning of normal stereo techniques, the goal is to process sounds so that they appear to come from particular locations in three-dimensional space. Although loudspeaker systems are being developed, most of the recent work focuses on using headphones for playback and is the outgrowth of earlier analog techniques. For example, in binaural recording, the sound of an orchestra playing classical music is recorded through small mics in the two "ear canals" of an anthropomorphic artificial or "dummy" head placed in the audience of a concert hall. When the recorded piece is played back over headphones, the listener passively experiences the illusion of hearing the violins on the left and the cellos on the right, along with all the associated echoes, resonances, and ambience of the original environment. Current techniques use digital signal processing to synthesize the acoustical properties that people use to localize a sound source in space. Thus, they provide the flexibility of a kind of digital dummy head, allowing a more active experience in which a listener can both design and move around or interact with a simulated acoustic environment in real time. Such simulations are being developed for a variety of application areas including architectural acoustics, advanced human-computer interfaces, telepresence and virtual reality, navigation aids for the visually-impaired, and as a test bed for psychoacoustical investigations of complex spatial cues. The tutorial will review the basic psychoacoustical cues that determine human sound localization and the techniques used to measure these cues as Head-Related Transfer Functions (HRTFs) for the purpose of synthesizing virtual acoustic environments. The only conclusive test of the adequacy of such simulations is an operational one in which

  3. Selecting a Dean of Faculty through a Partially Democratic Process to Improve Health Programs: Short Communication

    Directory of Open Access Journals (Sweden)

    Ali E. Oskouei

    2014-12-01

    Full Text Available The Dean of Faculties is normally selected by the Chancellor of Universities. The democratic way of selecting a dean of faculties is an innovative procedure that first happened in 2013 at Tabriz University of Medical Sciences (TUMS. A brief survey of the faculties revealed that there were some disadvantages of this procedure. An insufficient number of candidates, obligation in nomination in some cases, casting ballots only by faculty members, and lack of future and strategic plans by candidates are some deficits in the process that brought some risk to the faculties and sometimes unrest to TUMS. These risks made the process more dangerous than it used to be previously, when we used more traditional ways of selecting a dean of faculty. In order to prevent possible risks to the faculty and university, we offer some suggestions to make the ground ready for democratic practices in selecting a dean of faculty.

  4. Recent developments in computer vision-based analytical chemistry: A tutorial review.

    Science.gov (United States)

    Capitán-Vallvey, Luis Fermín; López-Ruiz, Nuria; Martínez-Olmos, Antonio; Erenas, Miguel M; Palma, Alberto J

    2015-10-29

    Chemical analysis based on colour changes recorded with imaging devices is gaining increasing interest. This is due to its several significant advantages, such as simplicity of use, and the fact that it is easily combinable with portable and widely distributed imaging devices, resulting in friendly analytical procedures in many areas that demand out-of-lab applications for in situ and real-time monitoring. This tutorial review covers computer vision-based analytical (CVAC) procedures and systems from 2005 to 2015, a period of time when 87.5% of the papers on this topic were published. The background regarding colour spaces and recent analytical system architectures of interest in analytical chemistry is presented in the form of a tutorial. Moreover, issues regarding images, such as the influence of illuminants, and the most relevant techniques for processing and analysing digital images are addressed. Some of the most relevant applications are then detailed, highlighting their main characteristics. Finally, our opinion about future perspectives is discussed.

  5. An Analytic Hierarchy Process (AHP) Approach to Port Selection Decisions – Empirical Evidence from Nigerian Ports

    OpenAIRE

    Chinonye Ugboma; Ogochukwu Ugboma; Innocent C Ogwude

    2006-01-01

    This study presents the findings of a survey to determine the service characteristics that shippers consider important when selecting a port and the way these characteristics are prioritised according to their importance. Seven criteria for the port selection decision and four ports were identified, and the decision problem was structured into a three-level hierarchy using the Analytic Hierarchy Process. The findings suggest that shippers place high emphasis on efficiency, frequency of ship v...

  6. Continuous-Time Mean-Variance Portfolio Selection under the CEV Process

    OpenAIRE

    Hui-qiang Ma

    2014-01-01

    We consider a continuous-time mean-variance portfolio selection model when stock price follows the constant elasticity of variance (CEV) process. The aim of this paper is to derive an optimal portfolio strategy and the efficient frontier. The mean-variance portfolio selection problem is formulated as a linearly constrained convex program problem. By employing the Lagrange multiplier method and stochastic optimal control theory, we obtain the optimal portfolio strategy and mean-variance effici...

  7. Scientific basis for process and catalyst design in the selective oxidation of methane to formaldehyde.

    Science.gov (United States)

    Arena, Francesco; Parmaliana, Adolfo

    2003-12-01

    The mechanism and kinetics of the gas-phase selective oxidation of methane to formaldehyde (MPO) are revised in the general context of catalytic oxidations. In agreement with ab initio calculations of the energy barrier for the activation of methane on transition metal oxide complexes, a formal Langmuir-Hinshelwood kinetic model is proposed which accounts for the "steady-state" conditions and activity-selectivity pattern of MPO catalysts, providing an original support to process design and catalyst development.

  8. Replicating and understanding successful innovations: Implementing tutorials in introductory physics

    Directory of Open Access Journals (Sweden)

    S. J. Pollock

    2005-09-01

    Full Text Available We report a detailed study of the implementation of Tutorials in Introductory Physics at a large-scale research institution. Based on two successive semesters of evaluation, we observe students’ improved conceptual mastery (force and motion concept evaluation median normalized gain 0.77, N=336 , albeit with some student discontent. We replicate the results of original studies of tutorial effectiveness and document how and why these results occur. Additionally, using the Colorado Learning Attitudes about Science Survey we measure the support of students’ expertlike beliefs about learning physics in our environment. We examine this implementation from a viewpoint that emphasizes varying contextual levels of this implementation, from students’ engagement in individual tasks, to the situations in which these tasks are embedded, to the broader classroom, departmental, and educational structures. We document both obvious and subtle features that help ensure the successful implementation of these reforms.

  9. Transverse Anderson localization of light: a tutorial review

    CERN Document Server

    Mafi, Arash

    2015-01-01

    This tutorial review gives an overview of the transverse Anderson localization of light in one and two transverse dimensions. A pedagogical approach is followed throughout the presentation, where many aspects of localization are illustrated by means of a few simple models. The tutorial starts with some basic aspects of random matrix theory, and light propagation through and reflection from a random stack of dielectric slabs. Transverse Anderson localization of light in one- and two-dimensional coupled waveguide arrays is subsequently established and discussed. Recent experimental observations of localization and image transport in disordered optical fibers are discussed. More advanced topics, such as hyper-transport in longitudinally varying disordered waveguides, the impact of nonlinearity, and propagation of partially coherent and quantum light, are also examined.

  10. A Computer-based Tutorial on Double-Focusing Spectrometers

    Science.gov (United States)

    Silbar, Richard R.; Browman, Andrew A.; Mead, William C.; Williams, Robert A.

    1998-10-01

    WhistleSoft is developing a set of computer-based, self-paced tutorials on particle accelerators that targets a broad audience, including undergraduate science majors and industrial technicians. (See http://www.whistlesoft.com/s~ilbar/.) We use multimedia techniques to enhance the student's rate of learning and retention of the material. The tutorials feature interactive On-Screen Laboratories and use hypertext, colored graphics, two- and three-dimensional animations, video, and sound. Parts of our Dipoles module deal with the double-focusing spectrometer and occur throughout the piece. Radial focusing occurs in the section on uniform magnets, while vertical focusing is in the non-uniform magnets section. The student can even understand the √2π bend angle on working through the (intermediate-level) discussion on the Kerst-Serber equations. This talk will present our discussion of this spectrometer, direct to you from the computer screen.

  11. Attribute Based Selection of Thermoplastic Resin for Vacuum Infusion Process: A Decision Making Methodology

    DEFF Research Database (Denmark)

    Raghavalu Thirumalai, Durai Prabhakaran; Lystrup, Aage; Løgstrup Andersen, Tom

    2012-01-01

    The composite industry looks toward a new material system (resins) based on thermoplastic polymers for the vacuum infusion process, similar to the infusion process using thermosetting polymers. A large number of thermoplastics are available in the market with a variety of properties suitable...... for different engineering applications, and few of those are available in a not yet polymerised form suitable for resin infusion. The proper selection of a new resin system among these thermoplastic polymers is a concern for manufactures in the current scenario and a special mathematical tool would...... be beneficial. In this paper, the authors introduce a new decision making tool for resin selection based on significant attributes. This article provides a broad overview of suitable thermoplastic material systems for vacuum infusion process available in today’s market. An illustrative example—resin selection...

  12. Selection process for trade study: Reusable Hydrogen Composite Tank System (RHCTS)

    Science.gov (United States)

    Greenberg, H. S.

    1994-01-01

    This document describes the selection process that will be used to identify the most suitable structural configuration option for an SSTO winged vehicle capable of delivering 25,000 lbs to a 220 nm circular orbit at 51.6 degree inclination. The most suitable RHCTS is within this configuration and will be the prototype design for subsequent design and analysis and the basis for the design and fabrication of a scale test article to be subjected to life cycle testing. The selection process for this TA 1 trade study is the same as that for the TA 2 trade study. As the trade study progresses additional insight may result in modifications to the selection criteria within in this process. Such modifications will result in an update of this document as appropriate.

  13. Decision making software for effective selection of treatment train alternative for wastewater using analytical hierarchy process.

    Science.gov (United States)

    Prasad, A D; Tembhurkar, A R

    2013-10-01

    Proper selection of treatment process and synthesis of treatment train is complex engineering activity requires crucial decision making during planning and designing of any Wastewater Treatment Plant (WWTP). Earlier studies on process selection mainly considered cost as the most important selection criteria and number of studies focused on cost optimization models using dynamic programming, geometric programming and nonlinear programming. However, it has been noticed that traditional cost analysis alone cannot be applied to evaluate Treatment Train (TT) alternatives, as number of important non-tangible factors cannot be easily expressed in monetary units. Recently researches focus on use of multi-criteria technique for selection of treatment process. AHP provides a powerful tool for multi-hierarchy and multi-variable system overcoming limitation of traditional techniques. The AHP model designed to facilitate proper decision making and reduce the margin of errors during optimization due to number of parameters in the hierarchy levels has been used in this study. About 14 important factors and 13 sub factors were identified for the selection of treatment alternatives for wastewater and sludge stream although cost is one of the most important selection criteria. The present paper provides details of developing a soft-tool called "ProSelArt" using an AHP model aiding for proper decision making.

  14. Implementations of advisory system for the solvent selection of carbon dioxide removal processes

    Energy Technology Data Exchange (ETDEWEB)

    Chan, C.; Lau, P. [Regina Univ., SK (Canada)

    1997-12-31

    The Solvent Selection Advisory System (SSAS) is a decision support system for aiding users in the preliminary selection of optimal solvents for carbon dioxide removal processes given different user specification and plant conditions. This paper describes an inference-network representation of the Solvent Selection Advisory System which has been previously implemented as a rule-based system. Two expert system shells, G2 and GDA from Gensym Corp. are used, and the implementations on a two shell are compared. Some advantages and disadvantages in the two representation approaches are discussed. (Author)

  15. A Tutorial on Using Dafny to Construct Verified Software

    Directory of Open Access Journals (Sweden)

    Paqui Lucio

    2017-01-01

    Full Text Available This paper is a tutorial for newcomers to the field of automated verification tools, though we assume the reader to be relatively familiar with Hoare-style verification. In this paper, besides introducing the most basic features of the language and verifier Dafny, we place special emphasis on how to use Dafny as an assistant in the development of verified programs. Our main aim is to encourage the software engineering community to make the move towards using formal verification tools.

  16. Biological imaging with coherent Raman scattering microscopy: a tutorial

    Science.gov (United States)

    Alfonso-García, Alba; Mittal, Richa; Lee, Eun Seong; Potma, Eric O.

    2014-01-01

    Abstract. Coherent Raman scattering (CRS) microscopy is gaining acceptance as a valuable addition to the imaging toolset of biological researchers. Optimal use of this label-free imaging technique benefits from a basic understanding of the physical principles and technical merits of the CRS microscope. This tutorial offers qualitative explanations of the principles behind CRS microscopy and provides information about the applicability of this nonlinear optical imaging approach for biological research. PMID:24615671

  17. GEN 480 UOP Course Tutorial / gen480dotcom

    OpenAIRE

    2015-01-01

    GEN 480 Entire Course For more course tutorials visit www.gen480.com   GEN 480 Week 1 Individual Assignment Ethics Awareness Inventory GEN 480 Week 1 DQ 1 GEN 480 Week 1 DQ 2 GEN 480 Week 1 DQ 3 GEN 480 Week 1 DQ 4 GEN 480 Week 1 Summary GEN 480 Week 2 Individual Assignment Ethics Awareness Inventory Analysis GEN 480 Week 2 Individual Assignment Professional Workplace Dilemma Paper GEN 480 Week 2 Learning Team Assignment Skills Assessment P...

  18. 2012 Community Earth System Model (CESM) Tutorial - Proposal to DOE

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Marika [National Center for Atmospheric Research, Boulder, CO (United States); Bailey, David A [National Center for Atmospheric Research, Boulder, CO (United States)

    2013-03-18

    The Community Earth System Model (CESM) is a fully-coupled, global climate model that provides state-of-the-art computer simulations of the Earth's past, present, and future climate states. This document provides the agenda and list of participants for the conference. Web materials for all lectures and practical sessions available from: http://www.cesm.ucar.edu/events/tutorials/073012/ .

  19. Analog circuit design a tutorial guide to applications and solutions

    CERN Document Server

    Williams, Jim

    2011-01-01

    * Covers the fundamentals of linear/analog circuit and system design to guide engineers with their design challenges. * Based on the Application Notes of Linear Technology, the foremost designer of high performance analog products, readers will gain practical insights into design techniques and practice. * Broad range of topics, including power management tutorials, switching regulator design, linear regulator design, data conversion, signal conditioning, and high frequency/RF design. * Contributors include the leading lights in analog design, Robert Dobkin, Jim Willia

  20. Tutorial Pengenalan Adobe Photoshop Menggunakan Adobe Flash CS3

    OpenAIRE

    Mayoka, Rio

    2011-01-01

    Kajian ini bertujuan untuk membangun sebuah aplikasi yang dapat menjadi alat bantu dalam pembelajaran Adobe Photoshop, dimana terdapat beberapa materi pengenalan dasar Adobe Photoshop. Aplikasi ini suatu gagasan dengan membuat tutorial beranimasi yang interatif. Aplikasi ini dibuat dengan menggunakan Adobe Flash CS3 dan dapat dijalankan dengan Flash player. Aplikasi ini dapat membantu para penggunanya dalam memahami pengenalan Adobe Photoshop, terutama pengenalan tool pada Adob...