Photosynthesis, plant growth and nitrogen nutrition in Alaskan tussock tundra: Response to experimental warming

Science.gov (United States)

Dynes, E.; Welker, J. M.; Moore, D. J.; Sullivan, P.; Ebbs, L.; Pattison, R.

2009-12-01

Temperature is predicted to rise significantly in northern latitudes over the next century. The Arctic tundra is a fragile ecosystem with low rates of photosynthesis and low nutrient mineralisation. Rising temperatures may increase photosynthetic capacity in the short term through direct stimulation of photosynthetic rates and also in the longer term due to enhanced nutrient availability. Different species and plant functional types may have different responses to warming which may have an impact on plant community structure. As part of the International Tundra Experiment (ITEX) to investigate the effects of warming on arctic vegetation, a series of open top chambers (OTCs) have been established at the Toolik Field Station (68°38’N, 149°36’W, elevation 720 m). This study employs 12 plots; 6 control plots and 6 warming plots covered with OTCs which maintain a temperature on average +1.54 °C degrees higher than ambient temperatures. The response of photosynthesis to temperature was measured using an infra-red gas analyzer (IRGA) with a cooling adaptor to manipulate leaf temperature and determine AMAX in two contrasting species, Eriophorum vaginatum (sedge) and Betula nana (shrub). Temperature within the chamber head of the IRGA was manipulated from 10 through 25 °C. We also measured the leaf area index of plots using a Decagon Accupar Ceptometer to provide insights into potential differences in canopy cover. In both OTC and control plots the photosynthetic rate of B. nana was greater than that of E. vaginatum, with the AMAX of B. nana peaking at 20.08°C and E. vaginatum peaking slightly lower at 19.7°C in the control plots. There was no apparent difference in the temperature optimum of photosynthesis of either species when exposed to the warming treatment. Although there was no difference in temperature optimum there were differences in the peak values of AMAX between treatment and control plots. In the case of B. nana, AMAX was higher in the OTCs than in

Code ''Repol'' to fit experimental data with a polynomial and its graphics plotting

International Nuclear Information System (INIS)

Travesi, A.; Romero, L.

1983-01-01

The ''Repol'' code performs the fitting of a set of experimental data, with a polynomial of mth. degree (max. 10), using the Least Squares Criterion. Further, it presents the graphic plotting of the fitted polynomial, in the appropriate coordinates axes system, by a plotter. An additional option allows also the graphic plotting of the experimental data, used for the fit. The necessary data to execute this code, are asked to the operator in the screen, in a iterative way, by screen-operator dialogue, and the values are introduced through the keyboard. This code is written in Fortran IV, and because of its structure programming in subroutine blocks, can be adapted to any computer with graphic screen and keyboard terminal, with a plotter serial connected to it, whose software has the Hewlett Packard ''Graphics 1000''. (author)

Code REPOL to fit experimental data with a polynomial, and its graphics plotting

International Nuclear Information System (INIS)

Romero, L.; Travesi, A.

1983-01-01

The REPOL code, performs the fitting a set of experimental data, with a polynomial of mth. degree (max. 10), using the Least Squares Criterion. further, it presents the graphic plotting of the fitted polynomial, in the appropriate coordinates axes system, by a plotter. An additional option allows also the graphic plotting of the experimental data, used for the fit. The necessary data to execute this code, are asked to the operator in the screen, in a iterative way, by screen-operator dialogue, and the values are introduced through the keyboard. This code is written in Fortran IV, and because of its structure programming in subroutine blocks, can be adapted to any computer with graphic screen and keyboard terminal, with a plotter serial connected to it, whose Software has the Hewlett Packard Graphics 1000. (Author) 5 refs

Experimental strategies in carrying out VCU for tobacco crop I: plot design and size.

Science.gov (United States)

Toledo, F H R B; Ramalho, M A P; Pulcinelli, C E; Bruzi, A T

2013-09-19

We aimed to establish standards for tobacco Valor de Cultivo e Uso (VCU) in Brazil. We obtained information regarding the size and design of plots of two varietal groups of tobacco (Virginia and Burley). Ten inbred lines of each varietal group were evaluated in a randomized complete block design with four replications. The plot contained 42 plants with six rows of seven columns each. For each experiment plant, considering the position of the respective plant in the plot (row and column) as a reference, cured leaf weight (g/plant), total sugar content (%), and total alkaloid content (%) were determined. The maximum curvature of the variations in coefficients was estimated. Trials with the number of plants per plot ranging from 2 to 41 were simulated. The use of a border was not justified because the interactions between inbred lines x position in the plots were never significant, showing that the behavior of the inbred lines coincided with the different positions. The plant performance varied according to the column position in the plot. To lessen the effect of this factor, the use of plots with more than one row is recommended. Experimental precision, evaluated by the CV%, increased with an increase in plot size; nevertheless, the maximum curvature of the variation coefficient method showed no expressive increase in precision if the number of plants was greater than seven. The result in identification of the best inbred line, in terms of the size of each plot, coincided with the maximum curvature method.

Code REX to fit experimental data to exponential functions and graphics plotting

International Nuclear Information System (INIS)

Romero, L.; Travesi, A.

1983-01-01

The REX code, written in Fortran IV, performs the fitting a set of experimental data to different kind of functions as: straight-line (Y = A + BX) , and various exponential type (Y-A B x , Y=A X B ; Y=A exp(BX) ) , using the Least Squares criterion. Such fitting could be done directly for one selected function of for the our simultaneously and allows to chose the function that best fitting to the data, since presents the statistics data of all the fitting. Further, it presents the graphics plotting, of the fitted function, in the appropriate coordinate axes system. An additional option allows also the Graphic plotting of experimental data used for the fitting. All the data necessary to execute this code are asked to the operator in the terminal screen, in the iterative way by screen-operator dialogue, and the values are introduced through the keyboard. This code could be executed with any computer provided with graphic screen and keyboard terminal, with a X-Y plotter serial connected to the graphics terminal. (Author) 5 refs

Shifts in the phylogenetic structure and functional capacity of soil microbial communities follow alteration of native tussock grassland ecosystems

NARCIS (Netherlands)

Wakelin, Steven A.; Barratt, Barbara I.P.; Gerard, Emily; Gregg, Adrienne L.; Brodie, Eoin L.; Andersen, Gary L.; DeSantis, Todd Z.; Zhou, Jizhong; He, Zhili; Kowalchuk, George A.; O'Callaghan, Maureen

Globally, tussock-based grasslands are being modified to increase productive capacity. The impacts of cultivation and over-sowing with exotic grass and legumes on soil microbiology were assessed at four sites in New Zealand which differed in soil type, climate and vegetation. Primary alteration of

Wash-off of Sr-90 and Cs-137 from two experimental plots. Model testing using Chernobyl data

International Nuclear Information System (INIS)

Konoplev, A.; Bulgakov, A.; Hoffman, O.; Thiessen, K.

1996-09-01

Surface water runoff from contaminated land is one of the major processes responsible for the contamination of water bodies. For example, the large area of land contaminated after the Chernobyl accident has become a continuing source of radionuclide contamination for natural waters and the aquatic ecosystem. Based on data from the Chernobyl accident, the 'Wash-off' scenario was developed to provide an opportunity to test models concerned with the movement of trace contaminants from terrestrial sources to water bodies. In particular, this scenario provides an opportunity for (1) evaluation of the movement of contaminants from soil to water, (2) calculation of the alteration and migration of contaminants in soil over different time scales, (3) increased understanding of contaminant transport at the process level, and (4) development and use of methods for estimation of key parameters. Modelers were provided with descriptions of two experimental plots near the Chernobyl NPP, one using simulated heavy rain (plot HR) and one using snow melt (plot SM). Initial information for plot HR included soil properties; hydrographs of rainfall and runoff dynamics; the time of application of rainfall; rainfall amounts, duration, and intensities; soil moisture content before the application of rainfall; regional data on average monthly precipitation and temperature; recorded information on naturally occurring precipitation between May and October 1986; and chemical forms of radionuclides in the soil of the plots prior to the experiments. Information for plot SM included the soil description and properties, snow storage in the snow melt period of 1988, chemical composition of the snow water, a hydrograph of the runoff dynamics, chemical radionuclide forms in the soil at the end of the experiment, and air and soil temperatures for the plot during the snow melt period. For each experimental plot, modelers were requested to estimate the vertical distribution of radionuclides (137 Cs and

Analysis of a Split-Plot Experimental Design Applied to a Low-Speed Wind Tunnel Investigation

Science.gov (United States)

Erickson, Gary E.

2013-01-01

A procedure to analyze a split-plot experimental design featuring two input factors, two levels of randomization, and two error structures in a low-speed wind tunnel investigation of a small-scale model of a fighter airplane configuration is described in this report. Standard commercially-available statistical software was used to analyze the test results obtained in a randomization-restricted environment often encountered in wind tunnel testing. The input factors were differential horizontal stabilizer incidence and the angle of attack. The response variables were the aerodynamic coefficients of lift, drag, and pitching moment. Using split-plot terminology, the whole plot, or difficult-to-change, factor was the differential horizontal stabilizer incidence, and the subplot, or easy-to-change, factor was the angle of attack. The whole plot and subplot factors were both tested at three levels. Degrees of freedom for the whole plot error were provided by replication in the form of three blocks, or replicates, which were intended to simulate three consecutive days of wind tunnel facility operation. The analysis was conducted in three stages, which yielded the estimated mean squares, multiple regression function coefficients, and corresponding tests of significance for all individual terms at the whole plot and subplot levels for the three aerodynamic response variables. The estimated regression functions included main effects and two-factor interaction for the lift coefficient, main effects, two-factor interaction, and quadratic effects for the drag coefficient, and only main effects for the pitching moment coefficient.

Experimental determination of the heat transfer coefficient in shell-and-tube condensers using the Wilson plot method

Directory of Open Access Journals (Sweden)

Havlik Jan

2017-01-01

Full Text Available This article deals with the experimental determination of heat transfer coefficients. The calculation of heat transfer coefficients constitutes a crucial issue in design and sizing of heat exchangers. The Wilson plot method and its modifications based on measured experimental data utilization provide an appropriate tool for the analysis of convection heat transfer processes and the determination of convection coefficients in complex cases. A modification of the Wilson plot method for shell-and-tube condensers is proposed. The original Wilson plot method considers a constant value of thermal resistance on the condensation side. The heat transfer coefficient on the cooling side is determined based on the change in thermal resistance for different conditions (fluid velocity and temperature. The modification is based on the validation of the Nusselt theory for calculating the heat transfer coefficient on the condensation side. A change of thermal resistance on the condensation side is expected and the value is part of the calculation. It is possible to improve the determination accuracy of the criterion equation for calculation of the heat transfer coefficient using the proposed modification. The criterion equation proposed by this modification for the tested shell-and-tube condenser achieves good agreement with the experimental results and also with commonly used theoretical methods.

Synthesis of the Sex Pheromone of the Tea Tussock Moth Based on a Resource Chemistry Strategy

Directory of Open Access Journals (Sweden)

Hong-Li Zhang

2018-06-01

Full Text Available Synthesis of the sex pheromone of the tea tussock moth in 33% overall yield over 10 steps was achieved. Moreover, the chiral pool concept was applied in the asymmetric synthesis. The synthesis used a chemical available on a large-scale from recycling of wastewater from the steroid industry. The carbon skeleton was constructed using the C4+C5+C8 strategy. Based on this strategy, the original chiral center was totally retained.

Modeling Short-Range Soil Variability and its Potential Use in Variable-Rate Treatment of Experimental Plots

Directory of Open Access Journals (Sweden)

A Moameni

2011-02-01

Full Text Available Abstract In Iran, the experimental plots under fertilizer trials are managed in such a way that the whole plot area uniformly receives agricultural inputs. This could lead to biased research results and hence to suppressing of the efforts made by the researchers. This research was conducted in a selected site belonging to the Gonbad Agricultural Research Station, located in the semiarid region, northeastern Iran. The aim was to characterize the short-range spatial variability of the inherent and management-depended soil properties and to determine if this variation is large and can be managed at practical scales. The soils were sampled using a grid 55 m apart. In total, 100 composite soil samples were collected from topsoil (0-30 cm and were analyzed for calcium carbonate equivalent, organic carbon, clay, available phosphorus, available potassium, iron, copper, zinc and manganese. Descriptive statistics were applied to check data trends. Geostatistical analysis was applied to variography, model fitting and contour mapping. Sampling at 55 m made it possible to split the area of the selected experimental plot into relatively uniform areas that allow application of agricultural inputs with variable rates. Keywords: Short-range soil variability, Within-field soil variability, Interpolation, Precision agriculture, Geostatistics

Landuse effects on runoff generating processes in tussock grassland indicated by mean transit time estimation using tritium

OpenAIRE

M. K. Stewart; B. D. Fahey

2010-01-01

The east Otago uplands of New Zealand's South Island have long been studied because of the environmental consequences of converting native tussock grasslands to other land covers, notably forestry and pasture for stock grazing. Early studies showed that afforestation substantially reduced annual water yield, stream peak flows, and 7-day low flows, mainly as a consequence of increased interception. Tritium measurements have indicated that surprisingly old water is present in catchments GH1 and...

Construction of an experimental plot seeder of wheat planting and compare it by imported one

Directory of Open Access Journals (Sweden)

I Eskandari

2016-09-01

Full Text Available Introduction Researchers frequently include multiple cultivars and fertility levels in field experiments. Therefore, the experiments sowing operation must represent a considerable saving in time and labor, compared to hand sowing. Greater flexibility in experimental design and setup could be achieved by equipment that enables quick changes in the cultivar and fertilizer rates from one plot to the next. A satisfactory seed drill must distribute a given quantity of seed evenly over a predetermined length of coulter row, the coulters must be spaced at exact intervals and depth of sowing must be uniform. In a self-propelled type of plot seeder, no coulter should run in a wheel track as the compaction of the soil can cause observable differences in vigor between plants in such a row and those in un-compacted rows. The machine should sow in succession from a try in which a series of seed pocket separated clearly and must be put into distributer funnel by an assistant operator. The length of gap being varied according to the nature and purpose of the plot. The objectives of this experiment were 1- to design and construct a local self-propelled plot seeder and 2- To compare it with the imported (Wintersteiger plot seeder in cereal breeding programs. Materials and Methods A small-plot seeder was designed and constructed to meet this objective. The unit consists of the following basic components: a toolbar for pulling a set of six blade coulter, an air compressor for lifting and putting down the openers and metering transmission drive wheel, an operators chair and work rack, one belt seed distribution. A cone-celled and rotor seed distributor is used for seed distribution to the openers. The cone system is connected to the gearbox and allows for great flexibility in changing cultivars, crop species, and plot length. This is driven by the separate drive wheel. The cone-celled distributor sows all the seed of the sample in making one complete turn. The

Herbaceous Legume Encroachment Reduces Grass Productivity and Density in Arid Rangelands.

Directory of Open Access Journals (Sweden)

Thomas C Wagner

Full Text Available Worldwide savannas and arid grasslands are mainly used for livestock grazing, providing livelihood to over a billion people. While normally dominated by perennial C4 grasses, these rangelands are increasingly affected by the massive spread of native, mainly woody legumes. The consequences are often a repression of grass cover and productivity, leading to a reduced carrying capacity. While such encroachment by woody plants has been extensively researched, studies on similar processes involving herbaceous species are rare. We studied the impact of a sustained and massive spread of the native herbaceous legume Crotalaria podocarpa in Namibia's escarpment region on the locally dominant fodder grasses Stipagrostis ciliata and Stipagrostis uniplumis. We measured tussock densities, biomass production of individual tussocks and tussock dormancy state of Stipagrostis on ten 10 m x 10 m plots affected and ten similarly-sized plots unaffected by C. podocarpa over eight consecutive years and under different seasonal rainfalls and estimated the potential relative productivity of the land. We found the percentage of active Stipagrostis tussocks and the biomass production of individual tussocks to increase asymptotically with higher seasonal rainfall reaching a maximum around 300 mm while the land's relative productivity under average local rainfall conditions reached only 40% of its potential. Crotalaria podocarpa encroachment had no effect on the proportion of productive grass tussocks, but reduced he productivity of individual Stipagrostis tussocks by a third. This effect of C. podocarpa on grass productivity was immediate and direct and was not compensated for by above-average rainfall. Besides this immediate effect, over time, the density of grass tussocks declined by more than 50% in areas encroached by C. podocarpa further and lastingly reducing the lands carrying capacity. The effects of C. podocarpa on grass productivity hereby resemble those of woody

Douglas-fir tussock moth- and Douglas-fir beetle-caused mortality in a ponderosa pine/Douglas-fir forest in the Colorado Front Range, USA

Science.gov (United States)

Jose F. Negron; Ann M. Lynch; Willis C. Schaupp; Vladimir Bocharnikov

2014-01-01

An outbreak of the Douglas-fir tussock moth, Orgyia pseudotsugata McDunnough, occurred in the South Platte River drainage on the Pike-San Isabel National Forest in the Colorado Front Range attacking Douglas-fir, Pseudotsuga menziesii (Mirb.) Franco. Stocking levels, species composition, and tree size in heavily and lightly defoliated stands were similar. Douglas-fir...

Runoff generating processes in adjacent tussock grassland and pine plantation catchments as indicated by mean transit time estimation using tritium

OpenAIRE

M. K. Stewart; B. D. Fahey

2010-01-01

The east Otago uplands of New Zealand's South Island have long been studied because of the environmental consequences of converting native tussock grasslands to other land covers, notably forestry and pasture for stock grazing. Early studies showed that afforestation substantially reduced annual water yield, stream peak flows, and 7-day low flows, mainly as a consequence of increased interception. Tritium measurements have indicated that surprisingly old water is present in catchments GH1 and...

Users manual for SPLPACK-1: a program package for plotting and editing of experimental and analytical data of various transient systems

International Nuclear Information System (INIS)

Muramatsu, Ken; Kosaka, Atsuo; Abe, Kiyoharu; Araya, Fumimasa; Kanazawa, Masayuki; Tanabe, Shuichi; Maniwa, Masaki.

1983-11-01

In the field of nuclear safety research, a number of computer codes are being developed for predicting trasient behavior of various nuclear facilities, and they are verified by comparing calculational results with experimental data. In the development and verification of these codes, data plotting is one of indispensable but labor-consuming processes. SPLPACK-1 which is a package of computer programs, written mostly in FORTRAN-IV, has been developed for data editing and plotting. The SPLPACK-1 package consists of two parts, SPLEDIT and SPLPLOT-1, and plotting is performed through two steps : (1) to store data by SPLEDIT in a file in a standardized format (the SPL format) and (2) to plot the data in the file by SPLPLOT-1 or other optional programs. The standardization of data format makes it possible to plot outputs from various sources by a single plotter program. This benefit not only reduces the costs of plotter program developments but also makes it easy to compare many analytical and experimental data in one figure. SPLPLOT-1 draws two-dimensional graphs of time-dependent history of variables or graphs of relationship between two variables. For user's convenience, it is provided with functions of auto-scaling, automatic unit conversion, data processing by user-supplied subroutines and so on. Several additional programs are available for other types of plotting such as bird's-eye view graphs. SPLPACK-1 has been effectively used in JAERI for the developments and uses of safety codes (THYDE-B1, THYDE-P1, RELAP4, RELAP5, MARCH, CORRAL, etc.) and experiments (ROSA-III and LOFT). (author)

Developing a savanna burning emissions abatement methodology for tussock grasslands in high rainfall regions of northern Australia

Directory of Open Access Journals (Sweden)

Jeremy Russell-Smith

2014-06-01

Full Text Available Fire-prone tropical savanna and grassland systems are a significant source of atmospheric emissions of greenhouse gases.  In recent years, substantial research has been directed towards developing accounting methodologies for savanna burning emissions to be applied in Australia’s National Greenhouse Gas Inventory, as well as for commercial carbon trading purposes.  That work has focused on woody savanna systems.  Here, we extend the methodological approach to include tussock grasslands and associated Melaleuca-dominated open woodlands (<10% foliage cover in higher rainfall (>1,000 mm/annum regions of northern Australia.  Field assessments under dry season conditions focused on deriving fuel accumulation, fire patchiness and combustion relationships for key fuel types: fine fuels − grass and litter; coarse woody fuels − twigs <6 mm diameter; heavy woody fuels − >6 mm diameter; and shrubs.  In contrast with previous savanna burning assessments, fire treatments undertaken under early dry season burning conditions resulted in negligible patchiness and very substantial consumption of fine fuels.  In effect, burning in the early dry season provides no benefits in greenhouse gas emissions and emissions reductions in tussock grasslands can be achieved only through reducing the extent of burning.  The practical implications of reduced burning in higher rainfall northern Australian grassland systems are discussed, indicating that there are significant constraints, including infrastructural, cultural and woody thickening issues.  Similar opportunities and constraints are observed in other international contexts, but especially project implementation challenges associated with legislative, political and governance issues.

Landuse effects on runoff generating processes in tussock grassland indicated by mean transit time estimation using tritium

Science.gov (United States)

Stewart, M. K.; Fahey, B. D.

2010-02-01

The east Otago uplands of New Zealand's South Island have long been studied because of the environmental consequences of converting native tussock grasslands to other land covers, notably forestry and pasture for stock grazing. Early studies showed that afforestation substantially reduced annual water yield, stream peak flows, and 7-day low flows, mainly as a consequence of increased interception. Tritium measurements have indicated that surprisingly old water is present in catchments GH1 and GH2, and the small headwater wetland and catchment (GH5). The old water contributes strongly to baseflow (and therefore also to quickflow). The data have been simulated assuming the presence of two types of water in the baseflow, young water from shallow aquifers connecting hillside regolith with the stream, and old water from deep bedrock aquifers, respectively. The mean transit time of the young water is of the order of months, while that of the old water is 25-26 years as revealed by the presence of tritium originating from the bomb-peak in NZ rainfall in late 1960s and early 1970s. Such a long transit time indicates slow release from groundwater reservoirs within the bedrock, which constitute by far the larger of the water stores. Comparison of the results from catchments GH1 (tussock) and GH2 (pine forest) suggests that about equal quantities of water (85 mm annually) are contributed from the deep aquifers in the two catchments, although runoff from the shallow aquifers has been strongly reduced by afforestation in GH2.

Experimental Study of Soil Organic Matter Loss From Cultivated Field Plots In The Venezuelan Andes.

Science.gov (United States)

Bellanger, B.; Huon, S.; Velasquez, F.; Vallès, V.; Girardin A, C.; Mariotti, A. B.

The question of discriminating sources of organic matter in suspended particles of stream flows can be addressed by using total organic carbon (TOC) concentration and stable isotope (13C, 15N) measurements when constant fluxes of organic matter supply can be assumed. However, little is known on the dynamics of organic matter release during soil erosion and on the temporal stability of its isotopic signature. In this study, we have monitored soil organic carbon loss and water runoff using natural rainfall events on three experimental field plots with different vegetation cover (bare soil, maize and coffee fields), set up on natural slopes of a tropical mountainous watershed in NW Venezuela (09°13'32'' ­ 09°10'00''N, 70°13'49'' ­ 70°18'34''W). Runoff and soil loss are markedly superior for the bare field plot than for the coffee field plot: by a factor 15 ­ 36, respectively, for the five-month experiment, and by a factor 30 ­ 120, respectively, during a single rainfall event experiment. Since runoff and soil organic matter loss are closely linked during most of the flow (at the time scales of this study), TOC concentration in suspended matter is constant. Furthermore, stable isotope compositions reflect those of top-soil organic matter from which they originate.

Limited carbon storage in soil and litter of experimental forest plots under increased atmospheric CO2

International Nuclear Information System (INIS)

Schlesinger, W.H.; Lichter, J.

2001-01-01

The current rise in atmospheric CO 2 concentration is thought to be mitigated in part by carbon sequestration within forest ecosystems, where carbon can be stored in vegetation or soils. The storage of carbon in soils is determined by the fraction that is sequestered in persistent organic materials, such as humus. In experimental forest plots of loblolly pine (Pinus taeda) exposed to high CO 2 concentrations, nearly half of the carbon uptake is allocated to short-lived tissues, largely foliage. These tissues fall to the ground and decompose, normally contributing only a small portion of their carbon content to refractory soil humic materials. Such findings call into question the role of soils as long-term carbon sinks, and show the need for a better understanding of carbon cycling in forest soils. Here we report a significant accumulation of carbon in the litter layer of experimental forest plots after three years of growth at increased CO 2 concentrations (565 μ l 1 ). But fast turnover times of organic carbon in the litter layer (of about three years) appear to constrain the potential size of this carbon sink. Given the observation that carbon accumulation in the deeper mineral soil layers was absent, we suggest that significant, long-term net carbon sequestration in forest soils is unlikely. (author)

BliP PLOT : PLOT DISTRIBUSI DATA BERDIMENSI - SATU

OpenAIRE

Anisa Anisa; Indwiati Indwiati

2014-01-01

Blip Plot, adalah salah satu plot yang sibuat untuk menampilkan data berdimensi-satu. Pada dasarnya plot ini terdiri dari kotak, garis, dan titik. Sebagaimana plot distribusi berdimensi-satu yang lain, BliP Plot menampilkan nilai-nilai data individu dalam titik-titik atau garis-garis, dan informasi berkelompok dalam garis atau kotak. Kelebihannya, Blip Plot menampilkan banyak keistimewaan baru seperti plot variable-widht dan beberapa pilihan pola titik. Keuntungan utama dari Blip ...

Environmental and vegetation controls on the spatial variability of CH4 emission from wet-sedge and tussock tundra ecosystems in the Arctic.

Science.gov (United States)

McEwing, Katherine Rose; Fisher, James Paul; Zona, Donatella

Despite multiple studies investigating the environmental controls on CH 4 fluxes from arctic tundra ecosystems, the high spatial variability of CH 4 emissions is not fully understood. This makes the upscaling of CH 4 fluxes from plot to regional scale, particularly challenging. The goal of this study is to refine our knowledge of the spatial variability and controls on CH 4 emission from tundra ecosystems. CH 4 fluxes were measured in four sites across a variety of wet-sedge and tussock tundra ecosystems in Alaska using chambers and a Los Gatos CO 2 and CH 4 gas analyser. All sites were found to be sources of CH 4 , with northern sites (in Barrow) showing similar CH 4 emission rates to the southernmost site (ca. 300 km south, Ivotuk). Gross primary productivity (GPP), water level and soil temperature were the most important environmental controls on CH 4 emission. Greater vascular plant cover was linked with higher CH 4 emission, but this increased emission with increased vascular plant cover was much higher (86 %) in the drier sites, than the wettest sites (30 %), suggesting that transport and/or substrate availability were crucial limiting factors for CH 4 emission in these tundra ecosystems. Overall, this study provides an increased understanding of the fine scale spatial controls on CH 4 flux, in particular the key role that plant cover and GPP play in enhancing CH 4 emissions from tundra soils.

Longleaf pine regeneration following Hurricane Ivan utilizing the RLGS plots

Science.gov (United States)

John C. Gilbert; John S. Kush

2013-01-01

On September 16, 2004, Hurricane Ivan hit the Alabama coast and severely impacted numerous plots in the U.S. Forest Service’s Regional Longleaf Growth Study (RLGS). The Escambia Experimental Forest (EEF) has 201 of the 325 RLGS plots. Nearly one-third of the EEF was impacted. Nine plots with pole-sized trees were entirely lost. Another 54 plots had some type of damage...

Evaluating uncertainty in 7Be-based soil erosion estimates: an experimental plot approach

Science.gov (United States)

Blake, Will; Taylor, Alex; Abdelli, Wahid; Gaspar, Leticia; Barri, Bashar Al; Ryken, Nick; Mabit, Lionel

2014-05-01

Soil erosion remains a major concern for the international community and there is a growing need to improve the sustainability of agriculture to support future food security. High resolution soil erosion data are a fundamental requirement for underpinning soil conservation and management strategies but representative data on soil erosion rates are difficult to achieve by conventional means without interfering with farming practice and hence compromising the representativeness of results. Fallout radionuclide (FRN) tracer technology offers a solution since FRN tracers are delivered to the soil surface by natural processes and, where irreversible binding can be demonstrated, redistributed in association with soil particles. While much work has demonstrated the potential of short-lived 7Be (half-life 53 days), particularly in quantification of short-term inter-rill erosion, less attention has focussed on sources of uncertainty in derived erosion measurements and sampling strategies to minimise these. This poster outlines and discusses potential sources of uncertainty in 7Be-based soil erosion estimates and the experimental design considerations taken to quantify these in the context of a plot-scale validation experiment. Traditionally, gamma counting statistics have been the main element of uncertainty propagated and reported but recent work has shown that other factors may be more important such as: (i) spatial variability in the relaxation mass depth that describes the shape of the 7Be depth distribution for an uneroded point; (ii) spatial variability in fallout (linked to rainfall patterns and shadowing) over both reference site and plot; (iii) particle size sorting effects; (iv) preferential mobility of fallout over active runoff contributing areas. To explore these aspects in more detail, a plot of 4 x 35 m was ploughed and tilled to create a bare, sloped soil surface at the beginning of winter 2013/2014 in southwest UK. The lower edge of the plot was bounded by

Use of experimental plots for assessing Chernobyl-derived fallout of 137CS in France

International Nuclear Information System (INIS)

Bonte, Ph.; Sogon, S.; Bourgeois, S.; Terce, M.; Morel, Ch.

2004-01-01

Caesium-137 ( 137 Cs) is widely used for the determination of soil erosion and sedimentation rates. However, in Europe, if the additional inputs of 137 Cs fallout associated with the Chernobyl accident have given a supplementary mark to know the chronological history of buried sediments in rivers or wetlands, they have considerably complicated the interpretation of 137 Cs inventories used for estimating soil redistribution on slopes. In fact, determination of Chernobyl-derived fallout 137 Cs is problematic because very few sites have been correctly sampled at the moment of the accident. During the ten years after, it was possible to estimate the fallout measuring the 134 Cs activity for estimating 137 Cs ( 137 Cs / 134 Cs 2.0 at the time of the accident). But these measurements are extremely rare, whereas it should be the more accurate method to resolve this question. The more used solution is to use model based on atmospheric circulation and rain precipitation, the main part of fallout been due to atmospheric washing by the rain. Other solution is to compare 137 Cs specific activity of soil samples collected after the accident and older samples. Then, we choose a set of soil samples collected on several experimental plots at different places in France, and sampled before and after the Chernobyl accident, to determine the part of contamination linked to this 137 Cs fallout event with a simple comparison of their 137 Cs specific activity. In fact, national French institutes working on agronomy maintain experimental plots, with varied surface area (1 m 2 10 m 2 or larger), for monitoring of soil physics and chemistry evolution. Nine sites were studied: two of them close to Paris, one 100 km east of Paris, 3 in Loire basin and 3 in south west, in the Pyrenees Atlantic. These measurements confirm the influence of the Chernobyl radioactive plume over the Paris Basin concerning the 137 Cs fallout. The 137 Cs specific activity is, on average, 25% (from 18 to 35% at

arXiv Laura++ : a Dalitz plot fitter

CERN Document Server

Back, John; Harrison, Paul; Latham, Thomas; O'Hanlon, Daniel; Qian, Wenbin; del Amo Sanchez, Pablo; Craik, Daniel; Ilic, Jelena; Otalora Goicochea, Juan; Puccio, Eugenia; Silva Coutinho, Rafael; Whitehead, Mark

The Dalitz plot analysis technique has become an increasingly important method in heavy flavour physics. The Laura++ fitter has been developed as a flexible tool that can be used for Dalitz plot analyses in different experimental environments. Explicitly designed for three-body decays of heavy-flavoured mesons to spinless final state particles, it is optimised in order to describe all possible resonant or nonresonant contributions, and to accommodate possible CP violation effects.

Use of experimental plots for assessing Chernobyl-derived fallout of {sup 137}CS in France

Energy Technology Data Exchange (ETDEWEB)

Bonte, Ph.; Sogon, S.; Bourgeois, S.; Terce, M.; Morel, Ch. [Laboratoire des Sciences du Climat et de l' Environnement, avenue de la Terrasse, 91 - Gif-sur-Yvette (France)

2004-07-01

Caesium-137 ({sup 137}Cs) is widely used for the determination of soil erosion and sedimentation rates. However, in Europe, if the additional inputs of {sup 137}Cs fallout associated with the Chernobyl accident have given a supplementary mark to know the chronological history of buried sediments in rivers or wetlands, they have considerably complicated the interpretation of {sup 137}Cs inventories used for estimating soil redistribution on slopes. In fact, determination of Chernobyl-derived fallout {sup 137}Cs is problematic because very few sites have been correctly sampled at the moment of the accident. During the ten years after, it was possible to estimate the fallout measuring the {sup 134}Cs activity for estimating {sup 137}Cs ({sup 137}Cs /{sup 134}Cs 2.0 at the time of the accident). But these measurements are extremely rare, whereas it should be the more accurate method to resolve this question. The more used solution is to use model based on atmospheric circulation and rain precipitation, the main part of fallout been due to atmospheric washing by the rain. Other solution is to compare {sup 137}Cs specific activity of soil samples collected after the accident and older samples. Then, we choose a set of soil samples collected on several experimental plots at different places in France, and sampled before and after the Chernobyl accident, to determine the part of contamination linked to this {sup 137}Cs fallout event with a simple comparison of their {sup 137}Cs specific activity. In fact, national French institutes working on agronomy maintain experimental plots, with varied surface area (1 m{sup 2} 10 m{sup 2} or larger), for monitoring of soil physics and chemistry evolution. Nine sites were studied: two of them close to Paris, one 100 km east of Paris, 3 in Loire basin and 3 in south west, in the Pyrenees Atlantic. These measurements confirm the influence of the Chernobyl radioactive plume over the Paris Basin concerning the {sup 137}Cs fallout. The

Master plot analysis of microcracking in graphite/epoxy and graphite/PEEK laminates

Science.gov (United States)

Nairn, John A.; Hu, Shoufeng; Bark, Jong Song

1993-01-01

We used a variational stress analysis and an energy release rate failure criterion to construct a master plot analysis of matrix microcracking. In the master plot, the results for all laminates of a single material are predicted to fall on a single line whose slope gives the microcracking toughness of the material. Experimental results from 18 different layups of AS4/3501-6 laminates show that the master plot analysis can explain all observations. In particular, it can explain the differences between microcracking of central 90 deg plies and of free-surface 90 deg plies. Experimental results from two different AS4/PEEK laminates tested at different temperatures can be explained by a modified master plot that accounts for changes in the residual thermal stresses. Finally, we constructed similar master plot analyses for previous literature microcracking models. All microcracking theories that ignore the thickness dependence of the stresses gave poor results.

Runoff generating processes in adjacent tussock grassland and pine plantation catchments as indicated by mean transit time estimation using tritium

Directory of Open Access Journals (Sweden)

M. K. Stewart

2010-06-01

Full Text Available The east Otago uplands of New Zealand's South Island have long been studied because of the environmental consequences of converting native tussock grasslands to other land covers, notably forestry and pasture for stock grazing. Early studies showed that afforestation substantially reduced annual water yield, stream peak flows, and 7-day low flows, mainly as a consequence of increased interception. Tritium measurements have indicated that surprisingly old water is present in catchments GH1 and GH2, and the small headwater wetland and catchment (GH5, and contributes strongly to baseflow. The data have been simulated assuming the presence of two types of water in the baseflow, young water from shallow aquifers connecting hillside regolith with the stream, and old water from deep bedrock aquifers, respectively. The mean transit time of the young water is approximately one month, while that of the old water is 25–26 years as revealed by the presence of tritium originating from the bomb-peak in NZ rainfall in late 1960s and early 1970s. Such a long transit time indicates slow release from groundwater reservoirs within the bedrock, which constitute by far the larger of the water stores. Comparison of the results from catchments GH1 (tussock and GH2 (pine forest suggests that about equal quantities of water (85 mm/a are contributed from the deep aquifers in the two catchments, although runoff from the shallow aquifers has been strongly reduced by afforestation in GH2. This study has revealed the presence of a long transit time component of water in runoff in a catchment with crystalline metamorphic bedrock.

Runoff generating processes in adjacent tussock grassland and pine plantation catchments as indicated by mean transit time estimation using tritium

Science.gov (United States)

Stewart, M. K.; Fahey, B. D.

2010-06-01

The east Otago uplands of New Zealand's South Island have long been studied because of the environmental consequences of converting native tussock grasslands to other land covers, notably forestry and pasture for stock grazing. Early studies showed that afforestation substantially reduced annual water yield, stream peak flows, and 7-day low flows, mainly as a consequence of increased interception. Tritium measurements have indicated that surprisingly old water is present in catchments GH1 and GH2, and the small headwater wetland and catchment (GH5), and contributes strongly to baseflow. The data have been simulated assuming the presence of two types of water in the baseflow, young water from shallow aquifers connecting hillside regolith with the stream, and old water from deep bedrock aquifers, respectively. The mean transit time of the young water is approximately one month, while that of the old water is 25-26 years as revealed by the presence of tritium originating from the bomb-peak in NZ rainfall in late 1960s and early 1970s. Such a long transit time indicates slow release from groundwater reservoirs within the bedrock, which constitute by far the larger of the water stores. Comparison of the results from catchments GH1 (tussock) and GH2 (pine forest) suggests that about equal quantities of water (85 mm/a) are contributed from the deep aquifers in the two catchments, although runoff from the shallow aquifers has been strongly reduced by afforestation in GH2. This study has revealed the presence of a long transit time component of water in runoff in a catchment with crystalline metamorphic bedrock.

Runoff and soil erosion plot-scale studies under natural rainfall: A meta-analysis of the Brazilian experience

Science.gov (United States)

Research to measure soil erosion rates in the United States from natural rainfall runoff plots began in the early 1900’s. In Brazil, the first experimental study at the plot-scale was conducted in the 1940’s; however, the monitoring process and the creation of new experimental field plots have not c...

A new method to study ferroelectrics using the remanent Henkel plots

Science.gov (United States)

Vopson, Melvin M.

2018-05-01

Analysis of experimental curves constructed from dc demagnetization and isothermal remanent magnetization known as Henkel and delta M plots, have served for over 53 years as an important tool for characterization of interactions in ferromagnets. In this article we address the question whether the same experimental technique could be applied to the study of ferroelectric systems. The successful measurement of the equivalent dc depolarisation and isothermal remanent polarization curves and the construction of the Henkel and delta P plots for ferroelectrics is reported here. Full measurement protocol is provided together with experimental examples for two ferroelectric ceramic samples. This new measurement technique is an invaluable experimental tool that could be used to further advance our understanding of ferroelectric materials and their applications.

Effects of alien woody plant invasion on the birds of Mountain ...

African Journals Online (AJOL)

The density, biomass, species richness and composition of birds in plots in two Mountain Fynbos plant-species assemblages (Tall Mixed Fynbos and Restionaceous Tussock Marsh), infested with alien woody plants (mainly Australian Acacia spp.) at the Cape of Good Hope Nature Reserve, South Africa, were compared ...

Nuclear Zpif-type plots

International Nuclear Information System (INIS)

Ma Yugang

2000-01-01

Isospin dependent classical molecular dynamics model is used to investigate the nuclear disassembly of 129 Xe. Zpif-type plot in the field of linguistics is tested for the rank-classified cluster arrangement from this nuclear disassembly. It is found that the average cluster charge (or mass) of rank n in the charge (or mass) list is exactly inverse to its rank, i.e. there exists Zpif's law at the point of the liquid gas phase transition. This novel criterion can be used to diagnose the nuclear liquid gas phase transition experimentally and theoretically

Product plots.

Science.gov (United States)

Wickham, Hadley; Hofmann, Heike

2011-12-01

We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

Checking the Adequacy of Fit of Models from Split-Plot Designs

DEFF Research Database (Denmark)

Almini, A. A.; Kulahci, Murat; Montgomery, D. C.

2009-01-01

models. In this article, we propose the computation of two R-2, R-2-adjusted, prediction error sums of squares (PRESS), and R-2-prediction statistics to measure the adequacy of fit for the WP and the SP submodels in a split-plot design. This is complemented with the graphical analysis of the two types......One of the main features that distinguish split-plot experiments from other experiments is that they involve two types of experimental errors: the whole-plot (WP) error and the subplot (SP) error. Taking this into consideration is very important when computing measures of adequacy of fit for split-plot...... of errors to check for any violation of the underlying assumptions and the adequacy of fit of split-plot models. Using examples, we show how computing two measures of model adequacy of fit for each split-plot design model is appropriate and useful as they reveal whether the correct WP and SP effects have...

Plot 3

DEFF Research Database (Denmark)

Lund, Inger-Lise; Gjessing, Susanne; Hermansen, Anne-Mette

Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning.......Plot 3 er første udgivelse af et alsidigt dansksystem til mellemtrinnet, hvor digitale medier er integreret i den daglige undervisning....

The Half-Half Plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.

2009-01-01

The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatter plot. The plot displays jumps clearly and reveals further

Nonlinear Dot Plots.

Science.gov (United States)

Rodrigues, Nils; Weiskopf, Daniel

2018-01-01

Conventional dot plots use a constant dot size and are typically applied to show the frequency distribution of small data sets. Unfortunately, they are not designed for a high dynamic range of frequencies. We address this problem by introducing nonlinear dot plots. Adopting the idea of nonlinear scaling from logarithmic bar charts, our plots allow for dots of varying size so that columns with a large number of samples are reduced in height. For the construction of these diagrams, we introduce an efficient two-way sweep algorithm that leads to a dense and symmetrical layout. We compensate aliasing artifacts at high dot densities by a specifically designed low-pass filtering method. Examples of nonlinear dot plots are compared to conventional dot plots as well as linear and logarithmic histograms. Finally, we include feedback from an expert review.

Code REPOL to fit experimental data with a polynomial, and its graphics plotting; Codigo REPOL para ajuste de datos experimentales a un polinomio: y su representacion grafica

Energy Technology Data Exchange (ETDEWEB)

Romero, L; Travesi, A

1983-07-01

The REPOL code, performs the fitting a set of experimental data, with a polynomial of mth. degree (max. 10), using the Least Squares Criterion. further, it presents the graphic plotting of the fitted polynomial, in the appropriate coordinates axes system, by a plotter. An additional option allows also the graphic plotting of the experimental data, used for the fit. The necessary data to execute this code, are asked to the operator in the screen, in a iterative way, by screen-operator dialogue, and the values are introduced through the keyboard. This code is written in Fortran IV, and because of its structure programming in subroutine blocks, can be adapted to any computer with graphic screen and keyboard terminal, with a plotter serial connected to it, whose Software has the Hewlett Packard Graphics 1000. (Author) 5 refs.

Program PLOTC4 (Version 86-1). Plot evaluated data from the ENDF/B format and/or experimental data which is in a computation format

International Nuclear Information System (INIS)

Cullen, D.E.

1986-09-01

Experimental and evaluated nuclear reaction data are world-wide compiled in EXFOR format and ENDF format, respectively. The computer program PLOTC4 described in the present document plots data from both formats; EXFOR data must be converted first to a ''computation format''. The program is available costfree from the IAEA Nuclear Data Section, upon request. (author)

Web-Based Search and Plot System for Nuclear Reaction Data

International Nuclear Information System (INIS)

Otuka, N.; Nakagawa, T.; Fukahori, T.; Katakura, J.; Aikawa, M.; Suda, T.; Naito, K.; Korennov, S.; Arai, K.; Noto, H.; Ohnishi, A.; Kato, K.

2005-01-01

A web-based search and plot system for nuclear reaction data has been developed, covering experimental data in EXFOR format and evaluated data in ENDF format. The system is implemented for Linux OS, with Perl and MySQL used for CGI scripts and the database manager, respectively. Two prototypes for experimental and evaluated data are presented

Trellis plots as visual aids for analyzing split plot experiments

DEFF Research Database (Denmark)

Kulahci, Murat; Menon, Anil

2017-01-01

The analysis of split plot experiments can be challenging due to a complicated error structure resulting from restrictions on complete randomization. Similarly, standard visualization methods do not provide the insight practitioners desire to understand the data, think of explanations, generate...... hypotheses, build models, or decide on next steps. This article demonstrates the effective use of trellis plots in the preliminary data analysis for split plot experiments to address this problem. Trellis displays help to visualize multivariate data by allowing for conditioning in a general way. They can...

SpectraPLOT, Visualization Package with a User-Friendly Graphical Interface

Science.gov (United States)

Sebald, James; Macfarlane, Joseph; Golovkin, Igor

2017-10-01

SPECT3D is a collisional-radiative spectral analysis package designed to compute detailed emission, absorption, or x-ray scattering spectra, filtered images, XRD signals, and other synthetic diagnostics. The spectra and images are computed for virtual detectors by post-processing the results of hydrodynamics simulations in 1D, 2D, and 3D geometries. SPECT3D can account for a variety of instrumental response effects so that direct comparisons between simulations and experimental measurements can be made. SpectraPLOT is a user-friendly graphical interface for viewing a wide variety of results from SPECT3D simulations, and applying various instrumental effects to the simulated images and spectra. We will present SpectraPLOT's ability to display a variety of data, including spectra, images, light curves, streaked spectra, space-resolved spectra, and drilldown plasma property plots, for an argon-doped capsule implosion experiment example. Future SpectraPLOT features and enhancements will also be discussed.

Field Plot Techniques for Black Sigatoka Evaluation in East African Highland Bananas

Directory of Open Access Journals (Sweden)

Okoro, JU.

1997-01-01

Full Text Available Number of plants per experimental unit and number of replications for the efficient and precise assessment of black sigatoka leaf spot disease caused by Mycosphaerella fijiensis in East African Highland bananas were determined. Two representative cultivars were used. Host response to black sigatoka infection was measured by recording the youngest leaf with necrotic spots. The number of plants per experimental unit was determined, using the methods of maximum curvature and comparison of variances, while the number of replications was estimated by Hatheway's method. The optimum experimental plot size was 3 plants (18 m2 for the beer banana cultivar 'Igitsiri', and 30 plants (180 m2 for the cooking banana cultivar 'Igisahira Gisanzwe', using the comparison of variances method. However, the optimum plot size was 15 plants (90 m2 for both cultivars using the method of maximum curvature. The latter statistical method was preferred because of the low precision of the estimates in the former method. Unreplicated trials with plots of 15 plants could be adequate to assess black sigatoka response in East African bananas if uniform disease pressure exists.

Split-plot Experiments with Unusual Numbers of Subplot Runs

DEFF Research Database (Denmark)

Kulahci, Murat

2007-01-01

In many experimental situations, it may not be feasible or even possible to run experiments in a completely randomized fashion as usually recommended. Under these circumstances, split-plot experiments in which certain factors are changed less frequently than the others are often used. Most...

Variability of Measured Runoff and Soil Loss from Field Plots

Directory of Open Access Journals (Sweden)

F. Asadzadeh

2016-02-01

Full Text Available Introduction: Field plots are widely used in studies related to the measurements of soil loss and modeling of erosion processes. Research efforts are needed to investigate factors affecting the data quality of plots. Spatial scale or size of plots is one of these factors which directly affects measuring runoff and soil loss by means of field plots. The effect of plot size on measured runoff or soil loss from natural plots is known as plot scale effect. On the other hand, variability of runoff and sediment yield from replicated filed plots is a main source of uncertainty in measurement of erosion from plots which should be considered in plot data interpretation processes. Therefore, there is a demand for knowledge of soil erosion processes occurring in plots of different sizes and of factors that determine natural variability, as a basis for obtaining soil loss data of good quality. This study was carried out to investigate the combined effects of these two factors by measurement of runoff and soil loss from replicated plots with different sizes. Materials and Methods: In order to evaluate the variability of runoff and soil loss data seven plots, differing in width and length, were constructed in a uniform slope of 9% at three replicates at Koohin Research Station in Qazvin province. The plots were ploughed up to down slope in September 2011. Each plot was isolated using soil beds with a height of 30 cm, to direct generated surface runoff to the lower part of the plots. Runoff collecting systems composed of gutters, pipes and tankswere installed at the end of each plot. During the two-year study period of 2011-2012, plots were maintained in bare conditions and runoff and soil loss were measured for each single event. Precipitation amounts and characteristics were directly measured by an automatic recording tipping-bucket rain gauge located about 200 m from the experimental plots. The entire runoff volume including eroded sediment was measured on

The half-half plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.

2012-01-01

The Half-Half (HH) plot is a new graphical method to investigate qualitatively the shape of a regression curve. The empirical HH-plot counts observations in the lower and upper quarter of a strip that moves horizontally over the scatterplot. The plot displays jumps clearly and reveals further

Plasma physics plotting package

International Nuclear Information System (INIS)

Hyman, D.H.

1981-02-01

We describe a package of plotting routines that do up to six two- or three-dimensional plots on a frame with minimal loss of resolution. The package now runs on a PDP-10 with PLOT-10 TCS primitives and on a Control Data Corporation-7600 and a Cray-1 with TV80LIB primitives on the National Magnetic Fusion Energy Computer Center network. The package is portable to other graphics systems because only the primitive plot calls are used from the underlying system's graphics package

MatrixPlot: visualizing sequence constraints

DEFF Research Database (Denmark)

Gorodkin, Jan; Stærfeldt, Hans Henrik; Lund, Ole

1999-01-01

MatrixPlot: visualizing sequence constraints. Sub-title Abstract Summary : MatrixPlot is a program for making high-quality matrix plots, such as mutual information plots of sequence alignments and distance matrices of sequences with known three-dimensional coordinates. The user can add information...

Distributed plot-making

DEFF Research Database (Denmark)

Jensen, Lotte Groth; Bossen, Claus

2016-01-01

different socio-technical systems (paper-based and electronic patient records). Drawing on the theory of distributed cognition and narrative theory, primarily inspired by the work done within health care by Cheryl Mattingly, we propose that the creation of overview may be conceptualised as ‘distributed plot......-making’. Distributed cognition focuses on the role of artefacts, humans and their interaction in information processing, while narrative theory focuses on how humans create narratives through the plot construction. Hence, the concept of distributed plot-making highlights the distribution of information processing...

NPLOT - NASTRAN PLOT

Science.gov (United States)

Mcentire, K.

1994-01-01

NPLOT is an interactive computer graphics program for plotting undeformed and deformed NASTRAN finite element models (FEMs). Although there are many commercial codes already available for plotting FEMs, these have limited use due to their cost, speed, and lack of features to view BAR elements. NPLOT was specifically developed to overcome these limitations. On a vector type graphics device the two best ways to show depth are by hidden line plotting or haloed line plotting. A hidden line algorithm generates views of models with all hidden lines removed, and a haloed line algorithm displays views with aft lines broken in order to show depth while keeping the entire model visible. A haloed line algorithm is especially useful for plotting models composed of many line elements and few surface elements. The most important feature of NPLOT is its ability to create both hidden line and haloed line views accurately and much more quickly than with any other existing hidden or haloed line algorithms. NPLOT is also capable of plotting a normal wire frame view to display all lines of a model. NPLOT is able to aid in viewing all elements, but it has special features not generally available for plotting BAR elements. These features include plotting of TRUE LENGTH and NORMALIZED offset vectors and orientation vectors. Standard display operations such as rotation and perspective are possible, but different view planes such as X-Y, Y-Z, and X-Z may also be selected. Another display option is the Z-axis cut which allows a portion of the fore part of the model to be cut away to reveal details of the inside of the model. A zoom function is available to terminals with a locator (graphics cursor, joystick, etc.). The user interface of NPLOT is designed to make the program quick and easy to use. A combination of menus and commands with help menus for detailed information about each command allows experienced users greater speed and efficiency. Once a plot is on the screen the interface

Code REX to fit experimental data to exponential functions and graphics plotting; Codigo REX para ajuste de datos experimentales a funciones exponenciales y su representacion grafica

Energy Technology Data Exchange (ETDEWEB)

Romero, L.; Travesi, A.

1983-07-01

The REX code, written in Fortran IV, performs the fitting a set of experimental data to different kind of functions as: straight-line (Y = A + BX) , and various exponential type (Y-A B{sup x}, Y=A X{sup B}; Y=A exp(BX) ) , using the Least Squares criterion. Such fitting could be done directly for one selected function of for the our simultaneously and allows to chose the function that best fitting to the data, since presents the statistics data of all the fitting. Further, it presents the graphics plotting, of the fitted function, in the appropriate coordinate axes system. An additional option allows also the Graphic plotting of experimental data used for the fitting. All the data necessary to execute this code are asked to the operator in the terminal screen, in the iterative way by screen-operator dialogue, and the values are introduced through the keyboard. This code could be executed with any computer provided with graphic screen and keyboard terminal, with a X-Y plotter serial connected to the graphics terminal. (Author) 5 refs.

The effect of human factors (cutting, burning and uprooting on experimental heatland plots

Directory of Open Access Journals (Sweden)

Calvo, L.

1992-12-01

Full Text Available Regeneration response after prescribed burning, cutting and uprooting in experimental heatland plots dominated by Erica autralis subsp. aragonensis, was studied. The highest percentage cover of annual species was observed two years after the treatment. From that moment the therophytes tended to decrease and were replaced by perennial species natural to the community. The temporal heterogeneity calculated shows the greatest changes in the initial stages. Regeneration was by an autosuccession process, slower in the case of the uprooted plots due to the greatest impact.

[fr] On étudie la réponse de la régénération après brûlage, coupe et l'arrachage dans les parcelles expérimentales de bruyère avec dominance de E. australis subsp. aragonensis. On observe un plus grand pourcentage de couverture d'espèces annuelles après deux ans de traitements. À partir de ce moment, les therophytes diminuent, et sont remplacées par des espèces pérennes, propres de la communauté. Grâce au calcul de l'hétérogénéité temporelle, on met en évidence les changements les plus importants lors des les premières étapes. La régénération se produit par un processus d'autosuccession, avec une récupération plus lente, car l'arrachage a été très drastique.
[es] Se estudia la respuesta de regeneración tras quema, corta y arranque en parcelas experimentales de brezal, con dominio de E. australis subsp. aragonensis (L. Se observa el mayor porcentaje de cobertura de especies anuales a los dos años de los tratamientos. A partir de ese momento, las terófitas tienden a disminuir, siendo sustituidas por especies perennes, propias de la comunidad. Mediante el cálculo de la heterogeneidad temporal se ponen de manifiesto los mayores cambios en las etapas iniciales. La regeneración se produce por un proceso de autosucesión, siendo el arranque más drástico por tanto muestra de una recuperación m

Program PLOTC4. (Version 87-1). Plot evaluated data from the ENDF/B format and/or experimental data which is in a computation format

International Nuclear Information System (INIS)

Cullen, D.E.

1987-06-01

Experimental and evaluated nuclear reaction data are world-wide compiled in EXFOR format (see document IAEA-NDS-1) and ENDF format (see document IAEA-NDS-10), respectively. The computer program PLOTC4 described in the present document plots data from both formats; EXFOR data must be converted first to a ''computation format'' (see document IAEA-NDS-80). The program is available upon request costfree from the IAEA Nuclear Data Section. (author)

The Chymistry of "The Learned Dr Plot" (1640-96).

Science.gov (United States)

Roos, Anna Marie

2014-01-01

In the seventeenth century, there were developing norms of openness in the presentation of scientific knowledge that were at odds with traditions of secrecy among chymists, particularly practitioners of chrysopoeia, or the transmutation of metals. This chapter analyzes how Dr. Robert Plot, the first professor of chymistry at Oxford, negotiated these boundaries within an institutional context. I first delineate his chymical and experimental practice, which incorporated procedures from medieval alchemical sources, particularly the Lullian corpus, as well as more novel practices from seventeenth-century chymistry. Then, I analyze how personal and institutional ambitions and economic considerations shaped to what extent Plot negotiated the boundaries between secrecy and the public dissemination of chymical knowledge.

Origin of nonlinearities in the Bagley plots of thermotropic copolyesters

NARCIS (Netherlands)

Moldenaers, P.; Vermant, J.; Mewis, J.; Heynderickx, I.E.J.

1996-01-01

The origin of the nonlinearity observed in Bagley plots of thermotropic copolyesters has been investigated experimentally. With the aid of a two-piston slit rheometer the dependence of the viscosity on the hydrostatic pressure has been determined directly. This dependence only accounts for part of

Restoration potential of sedge meadows in hand-cultivated soybean fields in northeastern China

Science.gov (United States)

Wang, Guodong; Middleton, Beth; Jiang, Ming

2013-01-01

Sedge meadows can be difficult to restore from farmed fields if key structural dominants are missing from propagule banks. In hand-cultivated soybean fields in northeastern China, we asked if tussock-forming Carex and other wetland species were present as seed or asexual propagules. In the Sanjiang Plain, China, we compared the seed banks, vegetative propagules (below-ground) and standing vegetation of natural and restored sedge meadows, and hand-cultivated soybean fields in drained and flooded conditions. We found that important wetland species survived cultivation as seeds for some time (e.g. Calamogrostis angustifolia and Potamogeton crispus) and as field weeds (e.g. C. angustifolia and Phragmites australis). Key structural species were missing in these fields, for example, Carex meyeriana. We also observed that sedge meadows restored without planting or seeding lacked tussock-forming sedges. The structure of the seed bank was related to experimental water regime, and field environments of tussock height, thatch depth, and presence of burning as based on Nonmetric Multidimensional Scaling analysis. To re-establish the structure imposed by tussock sedges, specific technologies might be developed to encourage the development of tussocks in restored sedge meadows.

Density Distribution Sunflower Plots

Directory of Open Access Journals (Sweden)

William D. Dupont

2003-01-01

Full Text Available Density distribution sunflower plots are used to display high-density bivariate data. They are useful for data where a conventional scatter plot is difficult to read due to overstriking of the plot symbol. The x-y plane is subdivided into a lattice of regular hexagonal bins of width w specified by the user. The user also specifies the values of l, d, and k that affect the plot as follows. Individual observations are plotted when there are less than l observations per bin as in a conventional scatter plot. Each bin with from l to d observations contains a light sunflower. Other bins contain a dark sunflower. In a light sunflower each petal represents one observation. In a dark sunflower, each petal represents k observations. (A dark sunflower with p petals represents between /2-pk k and /2+pk k observations. The user can control the sizes and colors of the sunflowers. By selecting appropriate colors and sizes for the light and dark sunflowers, plots can be obtained that give both the overall sense of the data density distribution as well as the number of data points in any given region. The use of this graphic is illustrated with data from the Framingham Heart Study. A documented Stata program, called sunflower, is available to draw these graphs. It can be downloaded from the Statistical Software Components archive at http://ideas.repec.org/c/boc/bocode/s430201.html . (Journal of Statistical Software 2003; 8 (3: 1-5. Posted at http://www.jstatsoft.org/index.php?vol=8 .

Difference and ratio plots

DEFF Research Database (Denmark)

Svendsen, Anders Jørgen; Holmskov, U; Bro, Peter

1995-01-01

and systemic lupus erythematosus from another previously published study (Macanovic, M. and Lachmann, P.J. (1979) Clin. Exp. Immunol. 38, 274) are also represented using ratio plots. Our observations indicate that analysis by regression analysis may often be misleading....... hitherto unnoted differences between controls and patients with either rheumatoid arthritis or systemic lupus erythematosus. For this we use simple, but unconventional, graphic representations of the data, based on difference plots and ratio plots. Differences between patients with Burkitt's lymphoma...

Isodose plotting for pen plotters

International Nuclear Information System (INIS)

Rosen, I.I.

1985-01-01

A general algorithm for treatment plan isodose line plotting is described which is particularly useful for pen plotters. Unlike other methods of plotting isodose lines, this algorithm is designed specifically to reduce pen motion, thereby reducing plotting time and wear on the transport mechanism. Points with the desired dose value are extracted from the dose matrix and stored, sorted into continuous contours, and then plotted. This algorithm has been implemented on DEC PDP-11/60 and VAX-11/780 computers for use with two models of Houston Instrument pen plotters, two models of Tektronix vector graphics terminals, a DEC VT125 raster graphics terminal, and a DEC VS11 color raster graphics terminal. Its execution time is similar to simpler direct-plotting methods

Distributed modeling of radiocesium washoff from the experimental watershed plots of the Fukushima fallout zone

Science.gov (United States)

Kivva, Sergei; Zheleznyak, Mark; Konoplev, Alexei; Nanba, Kenji; Onda, Yuichi; Wakiyama Yoshifumi Wakiyama, Yoshifumi

2015-04-01

The distributed hydrological "rainfall- runoff" models provide possibilities of the physically based simulation of surface and subsurface flow on watersheds based on the GIS processed data. The success of such modeling approaches for the predictions of the runoff and soil erosion provides a basis for the implementation of the distributed models of the radionuclide washoff from the watersheds. The field studies provided on the Chernobyl and Fukushima catchments provides a unique data sets for the comparative testing and improvements of the modeling tools for the watersheds located in the areas of the very different geographical and hydro-meteorological condition The set of USLE experimental plots has been established by CRIED, University of Tsukuba after the Fukushima accident to study soil erosion and 137Cs wash off from the watersheds (Onda et al, 2014). The distributed watershed models of surface and subsurface flow, sediment and radionuclide transport has been used to simulate the radionuclide transport in the basin Dnieper River, Ukraine and the watersheds of Prefecture Fuksuhima. DHSVM-R is extension of the distributed hydrological model DHSVM (Lettenmayer, Wigmosta et al, 1996-2014) by the including into it the module of the watershed radionuclide transport. DHSVM is a physically based, distributed hydrology-vegetation model for complex terrain based on the numerical solution of the network of one-dimensional equations. The surface flow submodel of DHSMV has been modified: four-directions schematization for the model's cells has been replaced by the eight-directions scheme, more numerically efficient finite -differences scheme was implemented. The new module of radionuclide wash-off from catchment and transport via stream network in soluble phase and on suspended sediments including bottom-water exchange processes was developed for DHSMV-R. DHSVM-R was implemented recently within Swedish- Ukrainian ENSURE project for the modeling of 234U wash-off from the

Plotting system for the MINCS code

International Nuclear Information System (INIS)

Watanabe, Tadashi

1990-08-01

The plotting system for the MINCS code is described. The transient two-phase flow analysis code MINCS has been developed to provide a computational tool for analysing various two-phase flow phenomena in one-dimensional ducts. Two plotting systems, namely the SPLPLOT system and the SDPLOT system, can be used as the plotting functions. The SPLPLOT system is used for plotting time transients of variables, while the SDPLOT system is for spatial distributions. The SPLPLOT system is based on the SPLPACK system, which is used as a general tool for plotting results of transient analysis codes or experiments. The SDPLOT is based on the GPLP program, which is also regarded as one of the general plotting programs. In the SPLPLOT and the SDPLOT systems, the standardized data format called the SPL format is used in reading data to be plotted. The output data format of MINCS is translated into the SPL format by using the conversion system called the MINTOSPL system. In this report, how to use the plotting functions is described. (author)

IPLOT, interactive MELCOR data plotting system

International Nuclear Information System (INIS)

2008-01-01

1 - Description of program or function: IPLOT is an interactive MELCOR data plotting system. It provides several kinds of GUI interfaces for a flexible data plotting. IPLOT capabilities include creation, saving and loading of user specified MELCOR variables trend graphs. IPLOT can use one or several plot files for a graph generation while the graphs can be either in one window or in several windows. Besides IPLOT provides several graph convenient functions such as zooming, re-sizing, printing for a detail analysis of severe accidents. 2 - Methods: Trend values seeking in a plot file is performed by a binary search method for fast performance. 3 - Restrictions on the complexity of the problem: MELCOR plot files are required for plotting

Partitioning of soil CO2 efflux in un-manipulated and experimentally flooded plots of a temperate fen

Science.gov (United States)

Wunderlich, S.; Borken, W.

2012-08-01

Peatlands store large amounts of organic carbon, but the carbon stock is sensitive to changes in precipitation or water table manipulations. Restoration of drained peatlands by drain blocking and flooding is a common measure to conserve and augment the carbon stock of peatland soils. Here, we report to what extent flooding affected the contribution of heterotrophic and rhizosphere respiration to soil CO2 efflux in a grass-dominated mountain fen in Germany. Soil CO2 efflux was measured in three un-manipulated control plots and three flooded plots in two consecutive years. Flooding was achieved by permanent irrigation during the growing seasons. Radiocarbon signatures of CO2 from different sources including soil CO2 efflux, incubated peat cores and live grass roots were repeatedly analyzed for partitioning of soil CO2 efflux. Additionally, heterotrophic respiration and its radiocarbon signature were determined by eliminating rhizosphere respiration in trenched subplots (only control). In the control plots, rhizosphere respiration determined by 14C signatures contributed between 47 and 61% during the growing season, but was small (4 ± 8%) immediately before budding. Trenching revealed a smaller rhizosphere contribution of 33 ± 8% (2009) and 22 ± 9% (2010) during growing seasons. Flooding reduced annual soil CO2 efflux of the fen by 42% in 2009 and by 30% in 2010. The reduction was smaller in 2010 mainly through naturally elevated water level in the control plots. A one-week interruption of irrigation caused a strong short-lived increase in soil CO2 efflux, demonstrating the sensitivity of the fen to water table drawdown near the peat surface. The reduction in soil CO2 efflux in the flooded plots diminished the relative proportion of rhizosphere respiration from 56 to 46%, suggesting that rhizosphere respiration was slightly more sensitive to flooding than heterotrophic respiration.

Determination of first order rate constants by natural logarithm of the slope plot exemplified by analysis of Aspergillus niger in batch culture

NARCIS (Netherlands)

Poulsen, B.R.; Ruiter, G.; Visser, J.; Iversen, J.J.L.

2003-01-01

Finding rate constants from experimental data is often difficult because of offset and noise. A computer program was developed to average experimental data points, reducing the effect of noise, and to produce a loge of slope plot - a plot of the natural logarithm of the slope of a curve -

Tracking Changes in Cardiac Output: Statistical Considerations on the 4-Quadrant Plot and the Polar Plot Methodology.

Science.gov (United States)

Saugel, Bernd; Grothe, Oliver; Wagner, Julia Y

2015-08-01

When comparing 2 technologies for measuring hemodynamic parameters with regard to their ability to track changes, 2 graphical tools are omnipresent in the literature: the 4-quadrant plot and the polar plot recently proposed by Critchley et al. The polar plot is thought to be the more advanced statistical tool, but care should be taken when it comes to its interpretation. The polar plot excludes possibly important measurements from the data. The polar plot transforms the data nonlinearily, which may prevent it from being seen clearly. In this article, we compare the 4-quadrant and the polar plot in detail and thoroughly describe advantages and limitations of each. We also discuss pitfalls concerning the methods to prepare the researcher for the sound use of both methods. Finally, we briefly revisit the Bland-Altman plot for the use in this context.

Normal probability plots with confidence.

Science.gov (United States)

Chantarangsi, Wanpen; Liu, Wei; Bretz, Frank; Kiatsupaibul, Seksan; Hayter, Anthony J; Wan, Fang

2015-01-01

Normal probability plots are widely used as a statistical tool for assessing whether an observed simple random sample is drawn from a normally distributed population. The users, however, have to judge subjectively, if no objective rule is provided, whether the plotted points fall close to a straight line. In this paper, we focus on how a normal probability plot can be augmented by intervals for all the points so that, if the population distribution is normal, then all the points should fall into the corresponding intervals simultaneously with probability 1-α. These simultaneous 1-α probability intervals provide therefore an objective mean to judge whether the plotted points fall close to the straight line: the plotted points fall close to the straight line if and only if all the points fall into the corresponding intervals. The powers of several normal probability plot based (graphical) tests and the most popular nongraphical Anderson-Darling and Shapiro-Wilk tests are compared by simulation. Based on this comparison, recommendations are given in Section 3 on which graphical tests should be used in what circumstances. An example is provided to illustrate the methods. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Diffusional falsification of kinetic constants on Lineweaver-Burk plots.

Science.gov (United States)

Ghim, Y S; Chang, H N

1983-11-07

The effect of mass transfer resistances on the Lineweaver-Burk plots in immobilized enzyme systems has been investigated numerically and with analytical approximate solutions. While Hamilton, Gardner & Colton (1974) studied the effect of internal diffusion resistances in planar geometry, our study was extended to the combined effect of internal and external diffusion in cylindrical and spherical geometries as well. The variation of Lineweaver-Burk plots with respect to the geometries was minimized by modifying the Thiele modulus and the Biot number with the shape factor. Especially for a small Biot number all the three Lineweaver-Burk plots fell on a single line. As was discussed by Hamilton et al. (1974), the curvature of the line for large external diffusion resistances was small enough to be assumed linear, which was confirmed from the two approximate solutions for large and small substrate concentrations. Two methods for obtaining intrinsic kinetic constants were proposed: First, we obtained both maximum reaction rate and Michaelis constant by fitting experimental data to a straight line where external diffusion resistance was relatively large, and second, we obtained Michaelis constant from apparent Michaelis constant from the figure in case we knew maximum reaction rate a priori.

Generalized Probability-Probability Plots

NARCIS (Netherlands)

Mushkudiani, N.A.; Einmahl, J.H.J.

2004-01-01

We introduce generalized Probability-Probability (P-P) plots in order to study the one-sample goodness-of-fit problem and the two-sample problem, for real valued data.These plots, that are constructed by indexing with the class of closed intervals, globally preserve the properties of classical P-P

Sampling Error in Relation to Cyst Nematode Population Density Estimation in Small Field Plots.

Science.gov (United States)

Župunski, Vesna; Jevtić, Radivoje; Jokić, Vesna Spasić; Župunski, Ljubica; Lalošević, Mirjana; Ćirić, Mihajlo; Ćurčić, Živko

2017-06-01

Cyst nematodes are serious plant-parasitic pests which could cause severe yield losses and extensive damage. Since there is still very little information about error of population density estimation in small field plots, this study contributes to the broad issue of population density assessment. It was shown that there was no significant difference between cyst counts of five or seven bulk samples taken per each 1-m 2 plot, if average cyst count per examined plot exceeds 75 cysts per 100 g of soil. Goodness of fit of data to probability distribution tested with χ 2 test confirmed a negative binomial distribution of cyst counts for 21 out of 23 plots. The recommended measure of sampling precision of 17% expressed through coefficient of variation ( cv ) was achieved if the plots of 1 m 2 contaminated with more than 90 cysts per 100 g of soil were sampled with 10-core bulk samples taken in five repetitions. If plots were contaminated with less than 75 cysts per 100 g of soil, 10-core bulk samples taken in seven repetitions gave cv higher than 23%. This study indicates that more attention should be paid on estimation of sampling error in experimental field plots to ensure more reliable estimation of population density of cyst nematodes.

Swallowing sound detection using hidden markov modeling of recurrence plot features

International Nuclear Information System (INIS)

Aboofazeli, Mohammad; Moussavi, Zahra

2009-01-01

Automated detection of swallowing sounds in swallowing and breath sound recordings is of importance for monitoring purposes in which the recording durations are long. This paper presents a novel method for swallowing sound detection using hidden Markov modeling of recurrence plot features. Tracheal sound recordings of 15 healthy and nine dysphagic subjects were studied. The multidimensional state space trajectory of each signal was reconstructed using the Taken method of delays. The sequences of three recurrence plot features of the reconstructed trajectories (which have shown discriminating capability between swallowing and breath sounds) were modeled by three hidden Markov models. The Viterbi algorithm was used for swallowing sound detection. The results were validated manually by inspection of the simultaneously recorded airflow signal and spectrogram of the sounds, and also by auditory means. The experimental results suggested that the performance of the proposed method using hidden Markov modeling of recurrence plot features was superior to the previous swallowing sound detection methods.

Swallowing sound detection using hidden markov modeling of recurrence plot features

Energy Technology Data Exchange (ETDEWEB)

Aboofazeli, Mohammad [Faculty of Engineering, Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada)], E-mail: umaboofa@cc.umanitoba.ca; Moussavi, Zahra [Faculty of Engineering, Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 (Canada)], E-mail: mousavi@ee.umanitoba.ca

2009-01-30

Automated detection of swallowing sounds in swallowing and breath sound recordings is of importance for monitoring purposes in which the recording durations are long. This paper presents a novel method for swallowing sound detection using hidden Markov modeling of recurrence plot features. Tracheal sound recordings of 15 healthy and nine dysphagic subjects were studied. The multidimensional state space trajectory of each signal was reconstructed using the Taken method of delays. The sequences of three recurrence plot features of the reconstructed trajectories (which have shown discriminating capability between swallowing and breath sounds) were modeled by three hidden Markov models. The Viterbi algorithm was used for swallowing sound detection. The results were validated manually by inspection of the simultaneously recorded airflow signal and spectrogram of the sounds, and also by auditory means. The experimental results suggested that the performance of the proposed method using hidden Markov modeling of recurrence plot features was superior to the previous swallowing sound detection methods.

Female-specific wing degeneration caused by ecdysteroid in the Tussock Moth, Orgyia recens: Hormonal and developmental regulation of sexual dimorphism

Directory of Open Access Journals (Sweden)

Saori Lobbia

2003-04-01

Full Text Available Females of the tussock moth Orgyia recens have vestigial wings, whereas the males have normal wings. During early pupal development, female wings degenerate drastically compared with those of males. To examine whether ecdysteroid is involved in this sex-specific wing development, we cultured pupal wings just after pupation with ecdysteroid (20-hydroxyecdysone, 20E. In the presence of 20E, the female wings degenerated to about one-fifth their original size. In contrast, the male wings cultured with 20E showed only peripheral degeneration just outside the bordering lacuna, as in other butterflies and moths. TUNEL analysis showed that apoptotic signals were induced by 20E over the entire region of female wings, but only in the peripheral region of male wings. Semi-thin sections of the wings cultured with ecdysteroid showed that phagocytotic hemocytes were observed abundantly throughout the female wings, but in only peripheral regions of male wings. These observations indicate that both apoptotic events and phagocytotic activation are triggered by ecdysteroid, in sex-specific and region-specific manners.

Fifth International Symposium on Recurrence Plot

CERN Document Server

Riley, Michael; Giuliani, Alessandro; Webber, Charles; Jr, Jr; Translational Recurrences : From Mathematical Theory to Real-World Applications

2014-01-01

This book features 13 papers presented at the Fifth International Symposium on Recurrence Plots, held August 2013 in Chicago, IL. It examines recent applications and developments in recurrence plots and recurrence quantifi cation analysis (RQA) with special emphasis on biological and cognitive systems and the analysis of coupled systems using cross-recurrence methods. Readers will discover new applications and insights into a range of systems provided by recurrence plot analysis and new theoretical and mathematical developments in recurrence plots. Recurrence plot based analysis is a powerful tool that operates on real-world complex systems that are nonlinear, non-stationary, noisy, of any statistical distribution, free of any particular model type, and not particularly long. Quantitative analyses promote the detection of system state changes, synchronized dynamical regimes, or classifi cation of system states. Th e book will be of interest to an interdisciplinary audience of recurrence plot users and researc...

A first look at measurement error on FIA plots using blind plots in the Pacific Northwest

Science.gov (United States)

Susanna Melson; David Azuma; Jeremy S. Fried

2002-01-01

Measurement error in the Forest Inventory and Analysis work of the Pacific Northwest Station was estimated with a recently implemented blind plot measurement protocol. A small subset of plots was revisited by a crew having limited knowledge of the first crew's measurements. This preliminary analysis of the first 18 months' blind plot data indicates that...

deltaPlotR: An R Package for Di?erential Item Functioning Analysis with Ango? s Delta Plot

OpenAIRE

David Magis; Bruno Facon

2014-01-01

Angoff's delta plot is a straightforward and not computationally intensive method to identify differential item functioning (DIF) among dichotomously scored items. This approach was recently improved by proposing an optimal threshold selection and by considering several item purification processes. Moreover, to support practical DIF analyses with the delta plot and these improvements, the R package deltaPlotR was also developed. The purpose of this paper is twofold: to outline the delta plot ...

Experimental conformational energy maps of proteins and peptides.

Science.gov (United States)

Balaji, Govardhan A; Nagendra, H G; Balaji, Vitukudi N; Rao, Shashidhar N

2017-06-01

We have presented an extensive analysis of the peptide backbone dihedral angles in the PDB structures and computed experimental Ramachandran plots for their distributions seen under a various constraints on X-ray resolution, representativeness at different sequence identity percentages, and hydrogen bonding distances. These experimental distributions have been converted into isoenergy contour plots using the approach employed previously by F. M. Pohl. This has led to the identification of energetically favored minima in the Ramachandran (ϕ, ψ) plots in which global minima are predominantly observed either in the right-handed α-helical or the polyproline II regions. Further, we have identified low energy pathways for transitions between various minima in the (ϕ,ψ) plots. We have compared and presented the experimental plots with published theoretical plots obtained from both molecular mechanics and quantum mechanical approaches. In addition, we have developed and employed a root mean square deviation (RMSD) metric for isoenergy contours in various ranges, as a measure (in kcal.mol -1 ) to compare any two plots and determine the extent of correlation and similarity between their isoenergy contours. In general, we observe a greater degree of compatibility with experimental plots for energy maps obtained from molecular mechanics methods compared to most quantum mechanical methods. The experimental energy plots we have investigated could be helpful in refining protein structures obtained from X-ray, NMR, and electron microscopy and in refining force field parameters to enable simulations of peptide and protein structures that have higher degree of consistency with experiments. Proteins 2017; 85:979-1001. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Analysis of different management systems for water and soil conservation in experimental plots of "macauba" (Acrocomia aculeata) in Araponga (MG, Brazil)

Science.gov (United States)

Batista Lúcio-Correa, João; Cristina-Tonello, Kelly; Taguas, Encarnación V.; Texeira-Dias, Herly C.

2015-04-01

In Brazil, the conservation of water resources and agricultural soil are key environmental and economic aspects to mantain land services and the quality of life people in rural and urban communities. The macaw - Acrocomia aculeata) (Jacq.) Lodd. (Ex Martius) - is a Brazilian native oleaginous palm, whose potential has been highlighted in the scientific community due to its high economic potential and its recent advances in crop farming. This study aims to quantify the runoff in macaw plantation, comparing different techniques of crop management for a period of one year (from September 2012 to August 2013). The data from this study were collected in the Experimental Farm of the Federal University of Viçosa (UFV) located in the municipality of Araponga, MG, Brazil. The seedlings took place in February 2009, in holes, spaced 5X5 in an area of 1.7 ha (680 plants) with a slope of 25%. Rainfall was monitored through three pluviometers with expose area of 162.86 cm² whereas the impact of different management systems on runoff was measured by using 10 plots of 63 m² each: 3 treatments with three repetitions plus the control plot. Each plot presented four macaw plants. The treatment one (T1), was formed by macaw plants without using any soil conservation technique; the treatment two (T2) consisted of macaws with a contour cord with 40 cm wide by 30 cm deep, located between the plantation lines; for the treatment three (T3) beans were planted forming vegetation strips; the control (T0) was represented by a portion without macaws plants, with spontaneous vegetation growing throughout the plot, which was not used any soil conservation technique. T2 presented the lowest values of runoff during the twelve months and at the same time, the greatest requirements of initial rainfall for runoff generation. In contrast, T3 showed the highest volumes of runoff for the study period, with a small reduction with the exception of January and February 2013, when the bean plants were well

karyoploteR: an R/Bioconductor package to plot customizable genomes displaying arbitrary data.

Science.gov (United States)

Gel, Bernat; Serra, Eduard

2017-10-01

Data visualization is a crucial tool for data exploration, analysis and interpretation. For the visualization of genomic data there lacks a tool to create customizable non-circular plots of whole genomes from any species. We have developed karyoploteR, an R/Bioconductor package to create linear chromosomal representations of any genome with genomic annotations and experimental data plotted along them. Plot creation process is inspired in R base graphics, with a main function creating karyoplots with no data and multiple additional functions, including custom functions written by the end-user, adding data and other graphical elements. This approach allows the creation of highly customizable plots from arbitrary data with complete freedom on data positioning and representation. karyoploteR is released under Artistic-2.0 License. Source code and documentation are freely available through Bioconductor (http://www.bioconductor.org/packages/karyoploteR) and at the examples and tutorial page at https://bernatgel.github.io/karyoploter_tutorial. bgel@igtp.cat. © The Author(s) 2017. Published by Oxford University Press.

PLOT-3D, Graphics Subroutines for 3-D Surface Plots with Arbitrary Rotations

International Nuclear Information System (INIS)

Basinger, D.; Gvildys, J.

1975-01-01

1 - Description of problem or function: PLOT-3D is a package of sub- programs designed to draw three-dimensional surfaces from arrays of points (x,y,z). The surfaces can be drawn after arbitrary rotations about the three coordinate axes. 2 - Method of solution: PLOT-3D is a computer program to plot any surface for which each coordinate pair (x,y) is associated with a unique z in the set of points (x,y,z). It uses matrix transformation of the points to generate different views of the surface after arbitrary rotations about the three coordinate axes. Four versions of PLOT-3D are available. Output of version 1 and 3 is by film recorder. Output of version 2 and 4 is by CalComp plotter. Versions 3 and 4 do not draw lines which would be invisible to a viewer looking at an opaque surface, whereas versions 1 and 2 draw every line on the surface. 3 - Restrictions on the complexity of the problem: Versions 3 and 4 limit number of rows in arrays (x,y,z) to 100 and also number of columns in arrays (x,y,z) to 100

Plot 5

DEFF Research Database (Denmark)

Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 5, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

Plot 4

DEFF Research Database (Denmark)

Lund, Inger-Lise; Hermansen, Anne-Mette; Ferdinand, Trine

Danskfaglig vejledning informerer om de tanker, der ligger til grund for Plot 4, og beskriver danskfaget ud fra nyere forskning inden for fagets mange delområder. Kapitelvejledning introducerer bogens tekster, forklarer hensigten med kapitlernes opgaver, giver forslag til undervisningen og brugen...

Representing uncertainty on model analysis plots

Directory of Open Access Journals (Sweden)

Trevor I. Smith

2016-09-01

Full Text Available Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model. Unfortunately, Bao’s original presentation of the model plot did not include a way to represent uncertainty in these measurements. I present details of a method to add error bars to model plots by expanding the work of Sommer and Lindell. I also provide a template for generating model plots with error bars.

Tamanho e forma de parcela em experimentos com morangueiro cultivado em solo ou em hidroponia Plot size and shape in trials using strawberry cultivated with soil or using hydroponics

Directory of Open Access Journals (Sweden)

Carine Cocco

2009-07-01

Full Text Available O objetivo deste trabalho foi estimar a forma e o tamanho de parcela ótimos para ensaios com a cultura do morangueiro (Fragaria x ananassa em cultivo hidropônico e em solo. Foram conduzidos dois, experimentos, um em cultivo convencional no solo, em túneis baixos, e outro em cultivo hidropônico. Em cada experimento, avaliaram-se os efeitos do tamanho e do formato das parcelas sobre a precisão experimental. Cada planta foi considerada uma unidade básica, e o número de unidades básicas por parcela variou de 1 (48 parcelas a 24 (duas parcelas. Foram ajustadas funções para a determinação do coeficiente de variação entre as parcelas e para a determinação da variância por unidade básica entre as parcelas. O cultivo no solo apresentou maior variabilidade experimental que o cultivo hidropônico. O aumento no número de plantas por parcela causou redução acentuada na variabilidade experimental, especialmente quando se usou o formato de parcela retangular. O tamanho ótimo estimado das parcelas é de dez plantas, no cultivo com solo, e de seis plantas, no cultivo hidropônico.The objective of this work was to estimate the optimal size and shape of plots to be used in experiments of strawberry (Fragaria x ananassa cultivation in soil or using hydroponics. Two experiments were conducted, one in soil in low tunnels, and another in a hydroponic system. In each experiment, the effects of plot sizes and shapes on experimental accuracy were evaluated. Each plant was considered an experimental basic unit, and the number of plants per plot varied from 1 (48 plots to 24 (two plots. Functions were adjusted to determine the coefficient of variation among plots and the variance per basic unit between plots. Plants grown in soil had higher experimental variability than the plants grown in hydroponics. Increasing the number of plants per plot caused strong reduction in the experimental variability, especially when a rectangular plot shape was used

Presenting simulation results in a nested loop plot.

Science.gov (United States)

Rücker, Gerta; Schwarzer, Guido

2014-12-12

Statisticians investigate new methods in simulations to evaluate their properties for future real data applications. Results are often presented in a number of figures, e.g., Trellis plots. We had conducted a simulation study on six statistical methods for estimating the treatment effect in binary outcome meta-analyses, where selection bias (e.g., publication bias) was suspected because of apparent funnel plot asymmetry. We varied five simulation parameters: true treatment effect, extent of selection, event proportion in control group, heterogeneity parameter, and number of studies in meta-analysis. In combination, this yielded a total number of 768 scenarios. To present all results using Trellis plots, 12 figures were needed. Choosing bias as criterion of interest, we present a 'nested loop plot', a diagram type that aims to have all simulation results in one plot. The idea was to bring all scenarios into a lexicographical order and arrange them consecutively on the horizontal axis of a plot, whereas the treatment effect estimate is presented on the vertical axis. The plot illustrates how parameters simultaneously influenced the estimate. It can be combined with a Trellis plot in a so-called hybrid plot. Nested loop plots may also be applied to other criteria such as the variance of estimation. The nested loop plot, similar to a time series graph, summarizes all information about the results of a simulation study with respect to a chosen criterion in one picture and provides a suitable alternative or an addition to Trellis plots.

Contour plotting programs for printer and Calcomp plotter

International Nuclear Information System (INIS)

Moller, P.

1980-07-01

Contour plotting programs for plotting contour diagrams on printers or Calcomp plotters are described. The subroutines also exist in versions that are useful for the special application of finding minima and saddlepoints of nuclear potential energy surfaces generated by the subroutine PETR3 of another program package. For the general user, however, the most interesting aspect of the plotting package is probably the possibility of generating printer contour plots. The plotting of printer contour plots is a very fast and convenient way of displaying two-dimensional functions. 3 figures

Plot til lyst

DEFF Research Database (Denmark)

Sandvik, Kjetil

Den velfungerende krimi faciliterer denne dobbelte plotlæsning ved at muliggøre en særlig form for legende og udforskende interaktion mellem læser og plot: Ved at lægge spor ud og holde tolkningsmuligheder og løsningsmuligheder åbne får vi mulighed for at påtage os og udføre opklaringsarbejdet side......, der inviterer os med ind i selve handlingens rum og forløb og giver os forskellige handlingsmuligheder i forhold til disse. I bogen omtales denne særlige form for plot for forlystelsesplot med henvisning til forlystelsesparken og den særlige form for interaktiv fortælleform, som vi finder der: en...

The rainfall plot: its motivation, characteristics and pitfalls.

Science.gov (United States)

Domanska, Diana; Vodák, Daniel; Lund-Andersen, Christin; Salvatore, Stefania; Hovig, Eivind; Sandve, Geir Kjetil

2017-05-18

A visualization referred to as rainfall plot has recently gained popularity in genome data analysis. The plot is mostly used for illustrating the distribution of somatic cancer mutations along a reference genome, typically aiming to identify mutation hotspots. In general terms, the rainfall plot can be seen as a scatter plot showing the location of events on the x-axis versus the distance between consecutive events on the y-axis. Despite its frequent use, the motivation for applying this particular visualization and the appropriateness of its usage have never been critically addressed in detail. We show that the rainfall plot allows visual detection even for events occurring at high frequency over very short distances. In addition, event clustering at multiple scales may be detected as distinct horizontal bands in rainfall plots. At the same time, due to the limited size of standard figures, rainfall plots might suffer from inability to distinguish overlapping events, especially when multiple datasets are plotted in the same figure. We demonstrate the consequences of plot congestion, which results in obscured visual data interpretations. This work provides the first comprehensive survey of the characteristics and proper usage of rainfall plots. We find that the rainfall plot is able to convey a large amount of information without any need for parameterization or tuning. However, we also demonstrate how plot congestion and the use of a logarithmic y-axis may result in obscured visual data interpretations. To aid the productive utilization of rainfall plots, we demonstrate their characteristics and potential pitfalls using both simulated and real data, and provide a set of practical guidelines for their proper interpretation and usage.

Multiple hypothesis clustering in radar plot extraction

NARCIS (Netherlands)

Huizing, A.G.; Theil, A.; Dorp, Ph. van; Ligthart, L.P.

1995-01-01

False plots and plots with inaccurate range and Doppler estimates may severely degrade the performance of tracking algorithms in radar systems. This paper describes how a multiple hypothesis clustering technique can be applied to mitigate the problems involved in plot extraction. The measures of

Storytelling in Earth sciences: The eight basic plots

Science.gov (United States)

Phillips, Jonathan

2012-11-01

Reporting results and promoting ideas in science in general, and Earth science in particular, is treated here as storytelling. Just as in literature and drama, storytelling in Earth science is characterized by a small number of basic plots. Though the list is not exhaustive, and acknowledging that multiple or hybrid plots and subplots are possible in a single piece, eight standard plots are identified, and examples provided: cause-and-effect, genesis, emergence, destruction, metamorphosis, convergence, divergence, and oscillation. The plots of Earth science stories are not those of literary traditions, nor those of persuasion or moral philosophy, and deserve separate consideration. Earth science plots do not conform those of storytelling more generally, implying that Earth scientists may have fundamentally different motivations than other storytellers, and that the basic plots of Earth Science derive from the characteristics and behaviors of Earth systems. In some cases preference or affinity to different plots results in fundamentally different interpretations and conclusions of the same evidence. In other situations exploration of additional plots could help resolve scientific controversies. Thus explicit acknowledgement of plots can yield direct scientific benefits. Consideration of plots and storytelling devices may also assist in the interpretation of published work, and can help scientists improve their own storytelling.

Dalitz plot studies of D0 → KS0π+π− decays in a factorization approach

Directory of Open Access Journals (Sweden)

Leśniak Leonard

2014-01-01

Full Text Available A quasi two-body QCD factorization is used to study the D0 → KS0π+π− decays. The presently available high-statistics Dalitz plot data of this process measured by the Belle and BABAR Collaborations are analyzed together with the τ− → KS0π−ντ decay data. The total experimental branching fraction is also included in the fits which show a very good overall agreement with the experimental Dalitz plot density distributions. The branching fractions of the dominant channels compare well with those of the isobar Belle or BABAR models. We show that the branching fractions corresponding to the annihilation amplitudes are significant.

Vegetation resurvey is robust to plot location uncertainty

Science.gov (United States)

Kopecký, Martin; Macek, Martin

2017-01-01

Aim Resurveys of historical vegetation plots are increasingly used for the assessment of decadal changes in plant species diversity and composition. However, historical plots are usually relocated only approximately. This potentially inflates temporal changes and undermines results. Location Temperate deciduous forests in Central Europe. Methods To explore if robust conclusions can be drawn from resurvey studies despite location uncertainty, we compared temporal changes in species richness, frequency, composition and compositional heterogeneity between exactly and approximately relocated plots. We hypothesized that compositional changes should be lower and changes in species richness should be less variable on exactly relocated plots, because pseudo-turnover inflates temporal changes on approximately relocated plots. Results Temporal changes in species richness were not more variable and temporal changes in species composition and compositional heterogeneity were not higher on approximately relocated plots. Moreover, the frequency of individual species changed similarly on both plot types. Main conclusions The resurvey of historical vegetation plots is robust to uncertainty in original plot location and, when done properly, provides reliable evidence of decadal changes in plant communities. This provides important background for other resurvey studies and opens up the possibility for large-scale assessments of plant community change. PMID:28503083

9 CFR 108.3 - Preparation of plot plans.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of plot plans. 108.3... LICENSED ESTABLISHMENTS § 108.3 Preparation of plot plans. Plot plans shall show all of the buildings on a... on the plot plan the use of immediate adjacent properties such as, residential area, pasture, box...

FLOWPLOT2, 2-D, 3-D Fluid Dynamic Plots

International Nuclear Information System (INIS)

Cobb, C.K.; Tunstall, J.N.

1989-01-01

1 - Description of program or function: FLOWPLOT2 is a plotting program used with numerical or analytical fluid dynamics codes to create velocity vector plots, contour plots of up to three fluid parameters (e.g. pressure, density, and temperature), two-dimensional profile plots, three-dimensional curve plots, and/or three-dimensional surface plots for either the u or v velocity components. If the fluid dynamics code computes a transient or simulated time related solution, FLOWPLOT2 can also be used to generate these plots for any specified time interval. Multiple cases generating different plots for different time intervals may be run in one execution of the program. In addition, plots can be created for selected two- dimensional planes of three-dimensional steady-state problems. The user has the option of producing plots on CalComp or Versatec plotters or microfiche and of creating a compressed dataset before plotting. 2 - Method of solution: FLOWPLOT2 reads a dataset written by the fluid dynamics code. This dataset must be written in a specified format and must contain parametric data at the nodal points of a uniform or non-uniform rectangular grid formed by the intersection of the grid lines of the model. 3 - Restrictions on the complexity of the problem - Maxima of: 2500 nodes, 40 y-values for 2-D profile plots and 3-D curve plots, 20 contour values, 3 fluid parameters

Analysis of the {omega} and {phi}{yields}3{pi} Dalitz plot

Energy Technology Data Exchange (ETDEWEB)

Niecknig, Franz; Schneider, Sebastian P.; Kubis, Bastian [Helmholtz-Institut fuer Strahlen- und Kernphysik (Theorie), Nussallee 14-16, D-53115 Bonn (Germany)

2012-07-01

The theoretical description of vector meson interactions in hadron physics remains a challenge. With the ongoing experimental interest in {omega}{yields}3{pi} and {phi}{yields}3{pi} decays the need for equally precise theoretical predictions remains. The prevailing treatments all lack a thorough inclusion of final state interactions. In this talk we introduce a dispersive approach to these decays and study how crossed-channel rescattering effects shape the Dalitz plot.

Evaluating Plot Designs for the Tropics

Science.gov (United States)

Paul C. van Deusen; Bruce Bayle

1991-01-01

Theory and procedures are reviewed for determining the best type of plot for a given forest inventory. A general methodology is given that clarifies the relationship between different plot designs and the associated methods to produce the inventory estimates.

Emotional characters for automatic plot creation

NARCIS (Netherlands)

Theune, Mariet; Rensen, S.; op den Akker, Hendrikus J.A.; Heylen, Dirk K.J.; Nijholt, Antinus; Göbel, S.; Spierling, U.; Hoffmann, A.; Iurgel, I.; Schneider, O.; Dechau, J.; Feix, A.

The Virtual Storyteller is a multi-agent framework for automatic story generation. In this paper we describe how plots emerge from the actions of semi-autonomous character agents, focusing on the influence of the characters’ emotions on plot development.

Rainfall-runoff-soil and nutrient loss relationships for plot size areas of bhetagad watershed in Central Himalaya, India

Science.gov (United States)

Kothyari, B. P.; Verma, P. K.; Joshi, B. K.; Kothyari, U. C.

2004-06-01

The Bhetagad watershed in Kumaon Hills of Central Himalaya represents for hydro-meteorological conditions of the middle mountains over the Hindu Kush Himalayas. This study was conducted to assess the runoff, soil loss and subsequent nutrient losses from different prominent land uses in the Bhetagad watershed of Central Himalayas. Four experimental natural plots each of 20 m length and 5 m width were delineated on four most common land covers viz, pine forests, tea plantation, rainfed agricultural and degraded lands. Monthly values of runoff, soil loss and nutrient loss, for four successive years (1998-2001), from these land uses were quantified following standard methodologies. The annual runoff in these plots ranged between 51 and 3593 m 3/ha while the annual soil loss varied between 0.06 and 5.47 tonnes/ha during the entire study period. The loss of organic matter was found to be maximum in plot having pine forest followed by plot having tea plantation as the land cover. Annual loss of total N (6.24 kg/ha), total P (3.88 kg/ha) and total K (5.98 kg/ha),per unit loss of soil (tonnes/ha), was maximum from the plot having rainfed agricultural crop as the land cover. The loss of total N ranged between 0.30 and 21.27 kg/ha, total P ranged between 0.14 and 9.42 kg/ha, total K ranged from 0.12 to 11.31 kg/ha whereas organic matter loss varied between 3.65 and 255.16 kg/ha, from different experimental plots. The findings will lead towards devising better conservation/management options for mountain land use systems.

Split-plot designs for robotic serial dilution assays.

Science.gov (United States)

Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

2011-12-01

This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. © 2011, The International Biometric Society.

Application of mapped plots for single-owner forest surveys

Science.gov (United States)

Paul C. Van Deusen; Francis Roesch

2009-01-01

Mapped plots are used for the nation forest inventory conducted by the U.S. Forest Service. Mapped plots are also useful foro single ownership inventoires. Mapped plots can handle boundary overlap and can aprovide less variable estimates for specified forest conditions. Mapping is a good fit for fixed plot inventories where the fixed area plot is used for both mapping...

An image processing approach to computing distances between RNA secondary structures dot plots

Directory of Open Access Journals (Sweden)

Sapiro Guillermo

2009-02-01

Full Text Available Abstract Background Computing the distance between two RNA secondary structures can contribute in understanding the functional relationship between them. When used repeatedly, such a procedure may lead to finding a query RNA structure of interest in a database of structures. Several methods are available for computing distances between RNAs represented as strings or graphs, but none utilize the RNA representation with dot plots. Since dot plots are essentially digital images, there is a clear motivation to devise an algorithm for computing the distance between dot plots based on image processing methods. Results We have developed a new metric dubbed 'DoPloCompare', which compares two RNA structures. The method is based on comparing dot plot diagrams that represent the secondary structures. When analyzing two diagrams and motivated by image processing, the distance is based on a combination of histogram correlations and a geometrical distance measure. We introduce, describe, and illustrate the procedure by two applications that utilize this metric on RNA sequences. The first application is the RNA design problem, where the goal is to find the nucleotide sequence for a given secondary structure. Examples where our proposed distance measure outperforms others are given. The second application locates peculiar point mutations that induce significant structural alternations relative to the wild type predicted secondary structure. The approach reported in the past to solve this problem was tested on several RNA sequences with known secondary structures to affirm their prediction, as well as on a data set of ribosomal pieces. These pieces were computationally cut from a ribosome for which an experimentally derived secondary structure is available, and on each piece the prediction conveys similarity to the experimental result. Our newly proposed distance measure shows benefit in this problem as well when compared to standard methods used for assessing

Box Plots in the Australian Curriculum

Science.gov (United States)

Watson, Jane M.

2012-01-01

This article compares the definition of "box plot" as used in the "Australian Curriculum: Mathematics" with other definitions used in the education community; describes the difficulties students experience when dealing with box plots; and discusses the elaboration that is necessary to enable teachers to develop the knowledge…

Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

Science.gov (United States)

Hullman, Jessica; Resnick, Paul; Adar, Eytan

2015-01-01

Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

Split-plot fractional designs: Is minimum aberration enough?

DEFF Research Database (Denmark)

Kulahci, Murat; Ramirez, Jose; Tobias, Randy

2006-01-01

Split-plot experiments are commonly used in industry for product and process improvement. Recent articles on designing split-plot experiments concentrate on minimum aberration as the design criterion. Minimum aberration has been criticized as a design criterion for completely randomized fractional...... factorial design and alternative criteria, such as the maximum number of clear two-factor interactions, are suggested (Wu and Hamada (2000)). The need for alternatives to minimum aberration is even more acute for split-plot designs. In a standard split-plot design, there are several types of two...... for completely randomized designs. Consequently, we provide a modified version of the maximum number of clear two-factor interactions design criterion to be used for split-plot designs....

Experimental study on influence of vegetation coverage on runoff in wind-water erosion crisscross region

Science.gov (United States)

Wang, Jinhua; Zhang, Ronggang; Sun, Juan

2018-02-01

Using artificial rainfall simulation method, 23 simulation experiments were carried out in water-wind erosion crisscross region in order to analyze the influence of vegetation coverage on runoff and sediment yield. The experimental plots are standard plots with a length of 20m, width of 5m and slope of 15 degrees. The simulation experiments were conducted in different vegetation coverage experimental plots based on three different rainfall intensities. According to the experimental observation data, the influence of vegetation coverage on runoff and infiltration was analyzed. Vegetation coverage has a significant impact on runoff, and the higher the vegetation coverage is, the smaller the runoff is. Under the condition of 0.6mm/min rainfall intensity, the runoff volume from the experimental plot with 18% vegetation coverage was 1.2 times of the runoff from the experimental with 30% vegetation coverage. What’s more, the difference of runoff is more obvious in higher rainfall intensity. If the rainfall intensity reaches 1.32mm/min, the runoff from the experimental plot with 11% vegetation coverage is about 2 times as large as the runoff from the experimental plot with 53%vegetation coverage. Under the condition of small rainfall intensity, the starting time of runoff in the experimental plot with higher vegetation coverage is later than that in the experimental plot with low vegetation coverage. However, under the condition of heavy rainfall intensity, there is no obvious difference in the beginning time of runoff. In addition, the higher the vegetation coverage is, the deeper the rainfall infiltration depth is.The results can provide reference for ecological construction carried out in wind erosion crisscross region with serious soil erosion.

Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

Directory of Open Access Journals (Sweden)

Jessica Hullman

Full Text Available Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs, that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

The Heuristic Interpretation of Box Plots

Science.gov (United States)

Lem, Stephanie; Onghena, Patrick; Verschaffel, Lieven; Van Dooren, Wim

2013-01-01

Box plots are frequently used, but are often misinterpreted by students. Especially the area of the box in box plots is often misinterpreted as representing number or proportion of observations, while it actually represents their density. In a first study, reaction time evidence was used to test whether heuristic reasoning underlies this…

System for histogram entry, retrieval, and plotting

International Nuclear Information System (INIS)

Kellogg, M.; Gallup, J.M.; Shlaer, S.; Spencer, N.

1977-10-01

This manual describes the systems for producing histograms and dot plots that were designed for use in connection with the Q general-purpose data-acquisition system. These systems allow for the creation of histograms; the entry, retrieval, and plotting of data in the form of histograms; and the dynamic display of scatter plots as data are acquired. Although the systems are designed for use with Q, they can also be used as a part of other applications. 3 figures

Runoff and soil erosion of field plots in a subtropical mountainous region of China

Science.gov (United States)

Fang, N. F.; Wang, L.; Shi, Z. H.

2017-09-01

Anthropogenic pressure coupled with strong precipitation events and a mountainous landscape have led to serious soil erosion and associated problems in the subtropical climate zone of China. This study analyzes 1576 rainfall-runoff-soil loss events at 36 experimental plots (a total of 148 plot-years of data) under a wide range of conditions in subtropical mountainous areas of China where slope farming is commonly practiced. The plots, which have standardized dimensions, represent five common types of land use and have four different slopes. Event-based analyses show that almost half of the total rainfall caused soil erosion in the study area. The dominant factor controlling the runoff coefficient is the slope gradient rather than the land use type. The maximum soil lossfor crop plots under steep tillage (35°) is 5004 t km-2 for a single event. Among the common local crops, the average soil loss values increase in the following order: buckwheat soil loss increase in the following order: red clover soil loss is caused by a small number of extreme events. The annual average soil loss of the 44 plots ranges from 19 to 4090 t km-2 year-1. The annual soil loss of plots of different land use types decrease in the following order: bare land (1533 t km-2 year-1) > cropland (1179 t km-2 year-1) > terraced cropland (1083 t km-2 year-1) > orchard land (1020 t km-2 year-1) > grassland (762 t km-2 year-1) > terraced orchard land (297 t km-2 year-1) > forest and grassland (281 t km-2 year-1).

Expanded uncertainty associated with determination of isotope enrichment factors: Comparison of two point calculation and Rayleigh-plot.

Science.gov (United States)

Julien, Maxime; Gilbert, Alexis; Yamada, Keita; Robins, Richard J; Höhener, Patrick; Yoshida, Naohiro; Remaud, Gérald S

2018-01-01

The enrichment factor (ε) is a common way to express Isotope Effects (IEs) associated with a phenomenon. Many studies determine ε using a Rayleigh-plot, which needs multiple data points. More recent articles describe an alternative method using the Rayleigh equation that allows the determination of ε using only one experimental point, but this method is often subject to controversy. However, a calculation method using two points (one experimental point and one at t 0 ) should lead to the same results because the calculation is derived from the Rayleigh equation. But, it is frequently asked "what is the valid domain of use of this two point calculation?" The primary aim of the present work is a systematic comparison of results obtained with these two methodologies and the determination of the conditions required for the valid calculation of ε. In order to evaluate the efficiency of the two approaches, the expanded uncertainty (U) associated with determining ε has been calculated using experimental data from three published articles. The second objective of the present work is to describe how to determine the expanded uncertainty (U) associated with determining ε. Comparative methodologies using both Rayleigh-plot and two point calculation are detailed and it is clearly demonstrated that calculation of ε using a single data point can give the same result as a Rayleigh-plot provided one strict condition is respected: that the experimental value is measured at a small fraction of unreacted substrate (f < 30%). This study will help stable isotope users to present their results in a more rigorous expression: ε ± U and therefore to define better the significance of an experimental results prior interpretation. Capsule: Enrichment factor can be determined through two different methods and the calculation of associated expanded uncertainty allows checking its significance. Copyright © 2017 Elsevier B.V. All rights reserved.

Recurrence plots of exchange rates of currencies

OpenAIRE

Sparavigna, Amelia Carolina

2014-01-01

Used to investigate the presence of distinctive recurrent behaviours in natural processes, the recurrence plots can be applied to the analysis of economic data, and, in particular, to the characterization of exchange rates of currencies too. In this paper, we will show that these plots are able to characterize the periods of oscillation and random walk of currencies and enhance their reply to news and events, by means of texture transitions. The examples of recurrence plots given here are obt...

Tamanho de parcela para produtividade de grãos de sorgo granífero em diferentes densidades de plantas Experimental plot size in grain sorghum in different plant densities

Directory of Open Access Journals (Sweden)

Sidinei José Lopes

2005-06-01

Full Text Available O objetivo deste trabalho foi verificar a influência do arranjo de plantas na estimativa do tamanho ótimo de parcela da cultura de sorgo granífero, para a variável produtividade de grãos. O delineamento estatístico utilizado foi o de blocos ao acaso, num esquema fatorial com dois espaçamentos entre linhas (0,50 m e 0,80 m, três densidades de semeadura (100 mil, 160 mil e 220 mil plantas ha-1 e quatro repetições. Cada repetição foi composta, na área útil, por 12 unidades básicas de 0,50 m da linha de cultivo. Foram ajustados modelos, na estimativa do tamanho ótimo de parcela, que relacionam a variância ou o coeficiente de variação com quatro tamanhos simulados das parcelas. O tamanho estimado de parcelas, na cultura de sorgo granífero, é de 3,2 m² para a variável produtividade de grãos. O aumento do número de plantas, na linha, não proporciona incrementos na produtividade de grãos, porém resulta em melhorias da qualidade de experimentos com sorgo. A estimativa do tamanho ótimo de parcela depende do número de plantas utilizadas na unidade básica. O espaçamento entre linhas não influencia na estimativa do tamanho ótimo de parcela.The objective of this work was to establish plant arrangement effect on the optimal plot size estimates of grain sorghum yield experiments. The experimental design was a completely randomized block with factorial combination of two row spacings (0.50 m and 0.80 m, and three plant densities (100 thousand, 160 thousand and 220 thousand plants ha-1, and four replications. The area of each replication was composed by 12 basic units measuring 0.50 m in row length. Models were adjusted in optimum plot size estimates that correlate variance or variation coefficient with four simulated plot sizes. Plot size was 3.2 m² for grain sorghum yield experiments. Increasing number of plants in row did not result in higher seed yields, however it improved sorghum quality experiment. Estimation of the ideal

PLOTTAB, Curve and Point Plotting with Error Bars

International Nuclear Information System (INIS)

1999-01-01

1 - Description of program or function: PLOTTAB is designed to plot any combination of continuous curves and/or discrete points (with associated error bars) using user supplied titles and X and Y axis labels and units. If curves are plotted, the first curve may be used as a standard; the data and the ratio of the data to the standard will be plotted. 2 - Method of solution: PLOTTAB: The program has no idea of what data is being plotted and yet by supplying titles, X and Y axis labels and units the user can produce any number of plots with each plot containing almost any combination of curves and points with each plot properly identified. In order to define a continuous curve between tabulated points, this program must know how to interpolate between points. By input the user may specify either the default option of linear x versus linear y interpolation or alternatively log x and/or log Y interpolation. In all cases, regardless of the interpolation specified, the program will always interpolate the data to the plane of the plot (linear or log x and y plane) in order to present the true variation of the data between tabulated points, based on the user specified interpolation law. Tabulated points should be tabulated at a sufficient number of x values to insure that the difference between the specified interpolation and the 'true' variation of a curve between tabulated values is relatively small. 3 - Restrictions on the complexity of the problem: A combination of up to 30 curves and sets of discrete points may appear on each plot. If the user wishes to use this program to compare different sets of data, all of the data must be in the same units

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how

Modeling the washoff of 90Sr and 137Cs from an experimental plot established in the vicinity of the Chernobyl reactor

International Nuclear Information System (INIS)

Nair, S.K.; Hoffman, F.O.; Thiessen, K.M.; Konoplev, A.V.

1996-01-01

After the Chernobyl event, a large area of land was contaminated following the deposition of radionuclides. This area became a continuing source of radionuclides to natural waters and aquatic ecosystems. In 1986, an experimental plot was constructed in a contaminated area near the Chernobyl Nuclear Power Plant to study the washoff of radionuclides by surface runoff. Concentrations of 137 Cs and 90 Sr were measured in the top 10 cm of the soil prior to the experiments. During two separate experiments, intense artificial rainfall was applied to the plot. A washoff scenario was prepared with site-specific information on initial soil contamination, duration and quantities of rainfall and runoff, physicochemical properties of the topsoil, and some climatological data. Modelers were asked to predict (a) the vertical distributions of the initial concentrations of 137 Cs and 90 Sr in various chemical forms in the topsoil, (b) concentrations of these radionuclides in various chemical forms in the runoff water during each experiment, and (c) the total amounts of these radionuclides in various chemical forms in the runoff water during each experiment, and (c) the total amounts of these radionuclides that were washed off during each experiment. A vertical, one-dimensional, multiphase, multispecies transport model was then developed to simulate the movement of contaminants in the topsoil during the 160-d period between the Chernobyl event and the experiments as well as the washouts of contaminants by runoff during the experiments and during the 24-h period thereafter. The model provided very good predictions of the vertical distributions of total contaminant concentrations in the top 10 cm of the soil; however, the concentrations in individual chemical forms were not predicted as accurately. The complete modeling approach and comparisons of model predictions with measurements and with predictions from other modelers are presented. 19 refs., 22 figs., 8 tabs

The Shorth Plot

NARCIS (Netherlands)

Einmahl, J.H.J.; Gantner, M.; Sawitzki, G.

2008-01-01

The shorth plot is a tool to investigate probability mass concentration. It is a graphical representation of the length of the shorth, the shortest interval covering a certain fraction of the distribution, localized by forcing the intervals considered to contain a given point x. It is easy to

Genome U-Plot: a whole genome visualization.

Science.gov (United States)

Gaitatzes, Athanasios; Johnson, Sarah H; Smadbeck, James B; Vasmatzis, George

2018-05-15

The ability to produce and analyze whole genome sequencing (WGS) data from samples with structural variations (SV) generated the need to visualize such abnormalities in simplified plots. Conventional two-dimensional representations of WGS data frequently use either circular or linear layouts. There are several diverse advantages regarding both these representations, but their major disadvantage is that they do not use the two-dimensional space very efficiently. We propose a layout, termed the Genome U-Plot, which spreads the chromosomes on a two-dimensional surface and essentially quadruples the spatial resolution. We present the Genome U-Plot for producing clear and intuitive graphs that allows researchers to generate novel insights and hypotheses by visualizing SVs such as deletions, amplifications, and chromoanagenesis events. The main features of the Genome U-Plot are its layered layout, its high spatial resolution and its improved aesthetic qualities. We compare conventional visualization schemas with the Genome U-Plot using visualization metrics such as number of line crossings and crossing angle resolution measures. Based on our metrics, we improve the readability of the resulting graph by at least 2-fold, making apparent important features and making it easy to identify important genomic changes. A whole genome visualization tool with high spatial resolution and improved aesthetic qualities. An implementation and documentation of the Genome U-Plot is publicly available at https://github.com/gaitat/GenomeUPlot. vasmatzis.george@mayo.edu. Supplementary data are available at Bioinformatics online.

Thickening the Plot.

Science.gov (United States)

Rose, Brian

1979-01-01

Examines the content of daytime serial dramas to determine how the narrative structure promotes a sense of involvement in viewers. Competing plot lines, the lack of a concrete sense of resolution, the pattern of episodes, and the audience's awareness of information kept secret from characters all contribute to audience involvement. (JMF)

Estimation of Missing Observations in Two-Level Split-Plot Designs

DEFF Research Database (Denmark)

Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

2008-01-01

Inserting estimates for the missing observations from split-plot designs restores their balanced or orthogonal structure and alleviates the difficulties in the statistical analysis. In this article, we extend a method due to Draper and Stoneman to estimate the missing observations from unreplicated...... two-level factorial and fractional factorial split-plot (FSP and FFSP) designs. The missing observations, which can either be from the same whole plot, from different whole plots, or comprise entire whole plots, are estimated by equating to zero a number of specific contrast columns equal...... to the number of the missing observations. These estimates are inserted into the design table and the estimates for the remaining effects (or alias chains of effects as the case with FFSP designs) are plotted on two half-normal plots: one for the whole-plot effects and the other for the subplot effects...

Plot Description (PD)

Science.gov (United States)

Robert E. Keane

2006-01-01

The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

Quantitative chemical exchange saturation transfer (qCEST) MRI--RF spillover effect-corrected omega plot for simultaneous determination of labile proton fraction ratio and exchange rate.

Science.gov (United States)

Sun, Phillip Zhe; Wang, Yu; Dai, ZhuoZhi; Xiao, Gang; Wu, Renhua

2014-01-01

Chemical exchange saturation transfer (CEST) MRI is sensitive to dilute proteins and peptides as well as microenvironmental properties. However, the complexity of the CEST MRI effect, which varies with the labile proton content, exchange rate and experimental conditions, underscores the need for developing quantitative CEST (qCEST) analysis. Towards this goal, it has been shown that omega plot is capable of quantifying paramagnetic CEST MRI. However, the use of the omega plot is somewhat limited for diamagnetic CEST (DIACEST) MRI because it is more susceptible to direct radio frequency (RF) saturation (spillover) owing to the relatively small chemical shift. Recently, it has been found that, for dilute DIACEST agents that undergo slow to intermediate chemical exchange, the spillover effect varies little with the labile proton ratio and exchange rate. Therefore, we postulated that the omega plot analysis can be improved if RF spillover effect could be estimated and taken into account. Specifically, simulation showed that both labile proton ratio and exchange rate derived using the spillover effect-corrected omega plot were in good agreement with simulated values. In addition, the modified omega plot was confirmed experimentally, and we showed that the derived labile proton ratio increased linearly with creatine concentration (p plot for quantitative analysis of DIACEST MRI. Copyright © 2014 John Wiley & Sons, Ltd.

iCanPlot: visual exploration of high-throughput omics data using interactive Canvas plotting.

Directory of Open Access Journals (Sweden)

Amit U Sinha

Full Text Available Increasing use of high throughput genomic scale assays requires effective visualization and analysis techniques to facilitate data interpretation. Moreover, existing tools often require programming skills, which discourages bench scientists from examining their own data. We have created iCanPlot, a compelling platform for visual data exploration based on the latest technologies. Using the recently adopted HTML5 Canvas element, we have developed a highly interactive tool to visualize tabular data and identify interesting patterns in an intuitive fashion without the need of any specialized computing skills. A module for geneset overlap analysis has been implemented on the Google App Engine platform: when the user selects a region of interest in the plot, the genes in the region are analyzed on the fly. The visualization and analysis are amalgamated for a seamless experience. Further, users can easily upload their data for analysis--which also makes it simple to share the analysis with collaborators. We illustrate the power of iCanPlot by showing an example of how it can be used to interpret histone modifications in the context of gene expression.

Matrix matters: differences of grand skink metapopulation parameters in native tussock grasslands and exotic pasture grasslands.

Directory of Open Access Journals (Sweden)

Konstanze Gebauer

Full Text Available Modelling metapopulation dynamics is a potentially very powerful tool for conservation biologists. In recent years, scientists have broadened the range of variables incorporated into metapopulation modelling from using almost exclusively habitat patch size and isolation, to the inclusion of attributes of the matrix and habitat patch quality. We investigated the influence of habitat patch and matrix characteristics on the metapopulation parameters of a highly endangered lizard species, the New Zealand endemic grand skink (Oligosoma grande taking into account incomplete detectability. The predictive ability of the developed zxmetapopulation model was assessed through cross-validation of the data and with an independent data-set. Grand skinks occur on scattered rock-outcrops surrounded by indigenous tussock (bunch and pasture grasslands therefore implying a metapopulation structure. We found that the type of matrix surrounding the habitat patch was equally as important as the size of habitat patch for estimating occupancy, colonisation and extinction probabilities. Additionally, the type of matrix was more important than the physical distance between habitat patches for colonisation probabilities. Detection probability differed between habitat patches in the two matrix types and between habitat patches with different attributes such as habitat patch composition and abundance of vegetation on the outcrop. The developed metapopulation models can now be used for management decisions on area protection, monitoring, and the selection of translocation sites for the grand skink. Our study showed that it is important to incorporate not only habitat patch size and distance between habitat patches, but also those matrix type and habitat patch attributes which are vital in the ecology of the target species.

The Impact of Different Habitat Conditions on the Variability of Wild Populations of a Medicinal Plant Betonica officinalis L.

Directory of Open Access Journals (Sweden)

Kinga Kostrakiewicz-Gierałt

2015-06-01

Full Text Available Plants are important source of beneficial bioactive compounds which may find various applications as functional ingredients, such as components of food supplements, cosmetics, and pharmaceuticals. One such medicinal plant is Betonica officinalis, populations of which were investigated in 2012‒13. The studies were conducted in patches of Molinietum caeruleae dominated by: small meadow taxa (patch I; the shrub willow Salix repens ssp. rosmarinifolia (patch II; large tussock grasses Deschampsia caespitosa and Molinia caerulaea (patch III; tall-growing macroforbs Filipendula ulmaria and Solidago canadensis (patch IV. Over successive patches, the average height of plant cover increased, as did soil moisture, while light availability at ground level decreased. Much greater abundance and density of the Betonica officinalis population were found in patches I, III and IV, while lower values for these parameters were noted in patch II. Individuals in pre-reproductive stages were absent during whole study period in all study plots, vegetative ramet clusters were observed in plots situated in patches I and III in the first year of observations, while only generative ramet clusters occurred in plots set in patches II and IV. The number of rosettes per ramet cluster, number and dimensions of rosette leaves, height of flowering stems, number of cauline leaves, length of inflorescences, as well as number and length of flowers increased gradually over successive patches, whereas the number of generative stems per ramet cluster did not differ remarkably among populations. On the basis of the performed studies it might be concluded that the condition of populations deteriorated from patches overgrown by large-tussock grasses and characterized by considerable share of native and alien tall-growing macroforbs, via patch dominated by small meadow taxa, to patch prevailed by shrub willows.

A precision nutrient variability study of an experimental plot in ...

African Journals Online (AJOL)

DR F O ADEKAYODE

reported (Sadeghi et al., 2006; Shah et al., 2013). The objective of the research was to use the GIS kriging technique to produce precision soil nutrient concentration and fertility maps of a 2.5-ha experimental land in Mukono Agricultural Research and Development. Institute Mukono, Uganda. MATERIALS AND METHODS.

Experimental evidence of human recreational disturbance effects on bird-territory establishment.

Science.gov (United States)

Bötsch, Yves; Tablado, Zulima; Jenni, Lukas

2017-07-12

The worldwide increase in human outdoor activities raises concerns for wildlife. Human disturbances, even at low levels, are likely to impact species during sensitive periods of the annual cycle. However, experimental studies during the putative sensitive period of territory establishment of birds which not only investigate low disturbance levels, but which also exclude the effect of habitat modification (e.g. walking trails) are lacking. Here, we experimentally disturbed birds in forest plots by walking through twice a day during territory establishment. Later we compared the breeding bird community of experimentally disturbed plots with that of undisturbed control plots. We discovered that the number of territories (-15.0%) and species richness (-15.2%) in disturbed plots were substantially reduced compared with control plots. Species most affected included those sensitive to human presence (assessed by flight-initiation distances), open-cup nesters and above-ground foragers. Long-distance migrants, however, were unaffected due to their arrival after experimental disturbance took place. These findings highlight how territory establishment is a sensitive period for birds, when even low levels of human recreation may be perceived as threatening, and alter settlement decisions. This can have important implications for the conservation of species, which might go unnoticed when focusing only on already established birds. © 2017 The Author(s).

SUPERIMPOSED MESH PLOTTING IN MCNP

Energy Technology Data Exchange (ETDEWEB)

J. HENDRICKS

2001-02-01

The capability to plot superimposed meshes has been added to MCNP{trademark}. MCNP4C featured a superimposed mesh weight window generator which enabled users to set up geometries without having to subdivide geometric cells for variance reduction. The variance reduction was performed with weight windows on a rectangular or cylindrical mesh superimposed over the physical geometry. Experience with the new capability was favorable but also indicated that a number of enhancements would be very beneficial, particularly a means of visualizing the mesh and its values. The mathematics for plotting the mesh and its values is described here along with a description of other upgrades.

SplicePlot: a utility for visualizing splicing quantitative trait loci.

Science.gov (United States)

Wu, Eric; Nance, Tracy; Montgomery, Stephen B

2014-04-01

RNA sequencing has provided unprecedented resolution of alternative splicing and splicing quantitative trait loci (sQTL). However, there are few tools available for visualizing the genotype-dependent effects of splicing at a population level. SplicePlot is a simple command line utility that produces intuitive visualization of sQTLs and their effects. SplicePlot takes mapped RNA sequencing reads in BAM format and genotype data in VCF format as input and outputs publication-quality Sashimi plots, hive plots and structure plots, enabling better investigation and understanding of the role of genetics on alternative splicing and transcript structure. Source code and detailed documentation are available at http://montgomerylab.stanford.edu/spliceplot/index.html under Resources and at Github. SplicePlot is implemented in Python and is supported on Linux and Mac OS. A VirtualBox virtual machine running Ubuntu with SplicePlot already installed is also available.

Reaction Order Ambiguity in Integrated Rate Plots

Science.gov (United States)

Lee, Joe

2008-01-01

Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…

Productive variability, border use and plot size in trials with cherry tomato

Directory of Open Access Journals (Sweden)

Daniel Santos

2018-02-01

Full Text Available ABSTRACT: Knowing the productive variability within protected environments is crucial for choosing the experimental design to be used in that conditions. Thus, the aim of the present study was to assess the variability of fruit production in protected environment cultivated with cherry tomatoes and to verify the border effect and plot size in reducing this variability. To this, data from an uniformity test carried out in a greenhouse with cherry tomato cv. ‘Lili’ were used. Total fresh mass of fruits per plant was considered being these plants arranged in cropping rows parallel to the lateral openings of the greenhouse and also the same plants arranged in columns perpendicular to these openings. To generate the borders, different scenarios were designed by excluding rows and columns and using different plot sizes. In each scenario, homogeneity of variances among the remaining rows and columns was tested. There is no variability of fruit production among rows or columns in trials with cherry tomatoes carried out in greenhouses and the use of border does not bring benefits in terms of reduction of coefficient of variation or reduction of cases of variance heterogeneity among rows or columns. Plots with a size equal to or greater than two plants make possible to use the completely randomized design in the cherry tomato trials in greenhouses.

Contemplation on Plot and Personification in Tehran Makhuf

OpenAIRE

Mirjalil Akrami; Mohammad Pashaei

2013-01-01

Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot...

PET kinetic analysis --pitfalls and a solution for the Logan plot.

Science.gov (United States)

Kimura, Yuichi; Naganawa, Mika; Shidahara, Miho; Ikoma, Yoko; Watabe, Hiroshi

2007-01-01

The Logan plot is a widely used algorithm for the quantitative analysis of neuroreceptors using PET because it is easy to use and simple to implement. The Logan plot is also suitable for receptor imaging because its algorithm is fast. However, use of the Logan plot, and interpretation of the formed receptor images should be regarded with caution, because noise in PET data causes bias in the Logan plot estimates. In this paper, we describe the basic concept of the Logan plot in detail and introduce three algorithms for the Logan plot. By comparing these algorithms, we demonstrate the pitfalls of the Logan plot and discuss the solution.

SCALPLO, Plotting of Flux Output from SCALE Program

International Nuclear Information System (INIS)

Hersman, A.; De Leege, P.F.A.; Hoogenboom, J.E.

1993-01-01

1 - Description of program or function: SCALPLO is a plot program, designed to plot flux, power and spectrum information. Data exchange between SCALE modules and SCALPLO is via CCCC-interface files. As not all modules can produce these files, there are special routines supplied with SCALPLO that can produce CCCC-like files. These routines can be included in the code and for XSDRPM, CITATION, ANISN and DOT, the place to include these routines is supplied. 2 - Method of solution: SCALPLO consists of two sections. Firstly the pre-processor, which selects and reads the required data. Secondly the plot section which produces the plot on the selected output device. 3 - Restrictions on the complexity of the problem: SCALPLO requires DISSPLA version 11.0 or higher. The choice of output device depends on the devices installed

A drawback and an improvement of the classical Weibull probability plot

International Nuclear Information System (INIS)

Jiang, R.

2014-01-01

The classical Weibull Probability Paper (WPP) plot has been widely used to identify a model for fitting a given dataset. It is based on a match between the WPP plots of the model and data in shape. This paper carries out an analysis for the Weibull transformations that create the WPP plot and shows that the shape of the WPP plot of the data randomly generated from a distribution model can be significantly different from the shape of the WPP plot of the model due to the high non-linearity of the Weibull transformations. As such, choosing model based on the shape of the WPP plot of data can be unreliable. A cdf-based weighted least squares method is proposed to improve the parameter estimation accuracy; and an improved WPP plot is suggested to avoid the drawback of the classical WPP plot. The appropriateness and usefulness of the proposed estimation method and probability plot are illustrated by simulation and real-world examples

Development of TRatioPlot in ROOT

CERN Document Server

Gessinger-Befurt, Paul

2016-01-01

The ROOT data analysis and visualization framework is a software package which is widely used in physics, especially in high energy physics. A common visualization which has so far been lacking a direct implementation is the ratio plot, as well as a few similar types of plots. The scope and goal of the summer student project at CERN was to implement a class in ROOT itself, that can take care of the most common types of calculations, and produces high quality visuals.

137Cs profiles in erosion plots with different soil cultivation

International Nuclear Information System (INIS)

Andrello, A.C.; Appoloni, C.R.; Cassol, E.A.; Melquiades, F.L.

2006-01-01

Cesium-137 methodology has been successfully used to assess soil erosion. Seven erosion plots were sampled to determine the 137 Cs profile and to assess the erosion rates. Cesium-137 profile for native pasture plot showed an exponential decline below 5 cm depth, with little 137 Cs activity in the superficial layer (0-5 cm). Cesium-137 profile for wheat-soybean rotation plot in conventional tillage showed a uniform distribution with depth. For this plot, the soil loss occurs more in middle than upper and lower level. Cesium-137 profile for wheat-soybean rotation and wheat-maize rotation plots in no-tillage showed a similar result to the native pasture, with a minimum soil loss in the superficial layer. Cesium-137 profile for bare soil and cultivated pasture plots are similar, with a soil erosion rate of 229 t ha -1 year -1 . In the plots with a conventional tillage a greater soil loss occur in middle than upper and lower level. In no-tillage cultivation plots occurs soil loss in lower level, but no sign of soil loss neither gain in the upper level is observed. Cesium-137 methodology is a good tool to assess soil erosion and the 137 Cs profile gives a possibility to understand the soil erosion behavior in erosion plots. (author)

Digital data collection in forest dynamics plots

Science.gov (United States)

Faith Inman-Narahari; Christian Giardina; Rebecca Ostertag; Susan Cordell; Lawren Sack

2010-01-01

Summary 1. Computers are widely used in all aspects of research but their application to in-field data collection for forest plots has rarely been evaluated. 2. We developed digital data collection methods using ESRI mapping software and ruggedized field computers to map and measure ~30 000 trees in two 4-ha forest dynamics plots in wet and dry...

An experimental study on the thermal and fouling characteristics in a washable shell and helically coiled heat exchanger by the Wilson plot method

Energy Technology Data Exchange (ETDEWEB)

Koo, Kyoung Min; Ahn, Young Chull [Pusan National University, Busan (Korea, Republic of); Hwang, Jun Hyeon; Hur, Hyun; Na, Byung Chul; Hwang, Yoon Jae; Kim, Byung Soon [LG Electronics, Changwon (Korea, Republic of); Lee, Jae Keun [EcoEnergy Research Institute, Busan (Korea, Republic of)

2016-06-15

Brazed plate heat exchangers (BPHEX) are broadly used in water source heat pump systems for their large heat transfer capacity. Despite their high heat transfer rate, their high-performance rate tends to decrease sharply, due to fouling and they cannot be cleaned. So the thermal and fouling resistances of washable Shell and helically coiled tube heat exchangers (SCHEX) are designed and experimentally investigated in this study. Heat exchangers with two different tube types are studied and compared with a brazed plate heat exchanger. The overall thermal resistance coefficient of the heat exchangers as determined by using Wilson plots is 38% lower than that of the brazed plate heat exchanger at a Reynolds number of 2460. Fouling test results revealed that regular maintenance and physical cleaning can be used to maintain the thermal resistance of fouling of the washable heat exchanger at a level equal to or less than that of the brazed plate heat exchanger.

SEGY to ASCII: Conversion and Plotting Program

Science.gov (United States)

Goldman, Mark R.

1999-01-01

This report documents a computer program to convert standard 4 byte, IBM floating point SEGY files to ASCII xyz format. The program then optionally plots the seismic data using the GMT plotting package. The material for this publication is contained in a standard tar file (of99-126.tar) that is uncompressed and 726 K in size. It can be downloaded by any Unix machine. Move the tar file to the directory you wish to use it in, then type 'tar xvf of99-126.tar' The archive files (and diskette) contain a NOTE file, a README file, a version-history file, source code, a makefile for easy compilation, and an ASCII version of the documentation. The archive files (and diskette) also contain example test files, including a typical SEGY file along with the resulting ASCII xyz and postscript files. Requirements for compiling the source code into an executable are a C++ compiler. The program has been successfully compiled using Gnu's g++ version 2.8.1, and use of other compilers may require modifications to the existing source code. The g++ compiler is a free, high quality C++ compiler and may be downloaded from the ftp site: ftp://ftp.gnu.org/gnu Requirements for plotting the seismic data is the existence of the GMT plotting package. The GMT plotting package may be downloaded from the web site: http://www.soest.hawaii.edu/gmt/

Experimental site and design

Energy Technology Data Exchange (ETDEWEB)

Guenette, C. C. [SINTEF Applied Cemistry, Trondheim (Norway)

1999-08-01

Design and site selection criteria for the Svalbard oil spill experiments are described. All three experimental sites have coarse and mixed sediment beaches of sand and pebble; within each site wave exposure is very similar; along-shore and across-shore sediment characteristics are also relatively homogeneous. Tidal range is in the order of 0.6 m at neaps, and 1.8 m at springs. All three sites are open to wave action and are ice-free during the experimental period of mid-July to mid-October. Study plots at each site were selected for different treatments from within the continuous stretch of oiled shoreline, with oiled buffer zones between plots and at either end of the oiled zone. Treatments included mixing (tilling), sediment relocation (surf washing) and bioremediation (nutrient enrichment). Measurements and observations were carried out during the summers of 1997 and 1998. The characteristics measured were: wave and wind conditions; beach topography and elevation; sediment grain size distribution; mineral fines size distribution and mineral composition; background hydrocarbons; concentration of oil within experimental plots and the rate of oil loss over time; depth of oil penetration and thickness of the oiled sediment layer; oil concentration and toxicity of near-shore benthic sediments; mineral composition of suspended particulate material captured in sub-tidal sediment traps; and oil-fines interaction in near-shore water samples. 1 fig.

Experimental site and design

Energy Technology Data Exchange (ETDEWEB)

Guenette, C. C. [SINTEF Applied Cemistry, Trondheim (Norway)

1999-07-01

Design and site selection criteria for the Svalbard oil spill experiments are described. All three experimental sites have coarse and mixed sediment beaches of sand and pebble; within each site waveexposure is very similar; along-shore and across-shore sediment characteristics are also relatively homogeneous. Tidal range is in the order of 0.6 m at neaps, and 1.8 m at springs. All three sites are open to wave action and are ice-free during the experimental period of mid-July to mid-October. Study plots at each site were selected for different treatments from within the continuous stretch of oiled shoreline, with oiled buffer zones between plots and at either end of the oiled zone. Treatments included mixing (tilling), sediment relocation (surf washing) and bioremediation (nutrient enrichment). Measurements and observations were carried out during the summers of 1997 and 1998. The characteristics measured were: wave and wind conditions; beach topography and elevation; sediment grain size distribution; mineral fines size distribution and mineral composition; background hydrocarbons; concentration of oil within experimental plots and the rate of oil loss over time; depth of oil penetration and thickness of the oiled sediment layer; oil concentration and toxicity of near-shore benthic sediments; mineral composition of suspended particulate material captured in sub-tidal sediment traps; and oil-fines interaction in near-shore water samples. 1 fig.

True versus perturbed forest inventory plot locations for modeling: a simulation study

Science.gov (United States)

John W. Coulston; Kurt H. Riitters; Ronald E. McRoberts; William D. Smith

2006-01-01

USDA Forest Service Forest Inventory and Analysis plot information is widely used for timber inventories, forest health assessments, and environmental risk analyses. With few exceptions, true plot locations are not revealed; the plot coordinates are manipulated to obscure the location of field plots and thereby preserve plot integrity. The influence of perturbed plot...

Transverse mass and rapidity distributions and space dispersion plots of (net-)protons in Pb-Pb collisions at SPS energies

International Nuclear Information System (INIS)

Liu, Fu-Hu; Tian, Tian; Wen, Xin-Jian

2014-01-01

The transverse mass and rapidity distributions of (net-)protons produced in Pb-Pb collisions with different centrality intervals at 40A and 158A GeV have been analyzed by using the multisource thermal model in which the whole interacting system and then the sources are described by the Tsallis statistics. The modelling results are in agreement with the experimental data of the NA49 Collaboration. The dispersion plots (or scatter plots) of (net-)protons at the stage of freeze-out in the momentum space, velocity space, and transverse momentum and rapidity space in Pb-Pb collisions at 40A and 158A GeV in different centrality intervals are obtained. We see the differences in density distributions in the dispersion plots for different origins, centrality intervals, and incident energies for the considered collisions. (orig.)

FLOWCHART; a computer program for plotting flowcharts

Science.gov (United States)

Bender, Bernice

1982-01-01

The computer program FLOWCHART can be used to very quickly and easily produce flowcharts of high quality for publication. FLOWCHART centers each element or block of text that it processes on one of a set of (imaginary) vertical lines. It can enclose a text block in a rectangle, circle or other selected figure. It can draw a 'line connecting the midpoint of any side of any figure with the midpoint of any side of any other figure and insert an arrow pointing in the direction of flow. It can write 'yes' or 'no' next to the line joining two figures. FLOWCHART creates flowcharts using some basic plotting subroutine* which permit plots to be generated interactively and inspected on a Tektronix compatible graphics screen or plotted in a deferred mode on a Houston Instruments 42' pen plotter. The size of the plot, character set and character height in inches are inputs to the program. Plots generated using the pen plotter can be up to 42' high--the larger size plots being directly usable as visual aids in a talk. FLOWCHART centers each block of text on an imaginary column line. (The number of columns and column width are specified as input.) The midpoint of the longest line of text within the block is defined to be the center of the block and is placed on the column line. The spacing of individual words within the block is not altered when the block is positioned. The program writes the first block of text in a designated column and continues placing each subsequent block below the previous block in the same column. A block of text may be placed in a different column by specifying the number of the column and an earlier block of text with which the new block is to be aligned. If block zero is given as the earlier block, the new text is placed in the new column continuing down the page below the previous block. Optionally a column and number of inches from the top of the page may be given for positioning the next block of text. The program will normally draw one of five

Soil erosion measurements by means of experimental plots to determine best land management strategies in vineyards and olive orchards

Science.gov (United States)

Cerdà, Artemi; Keesstra, Saskia; Jordan, Antonio; Brevik, Erik; Nova, Agata; Prosdocimi, Massimo; Azorín-Molina, César; Yazdanpanah, Najme; Mahmoodabadi, Majid; Pereira, Paulo; Burguet, María

2016-04-01

In order to design sustainable land management there is a need to have accurate information on the impact this land management strategies have on water and sediment dynamics. This is especially important when a proper management is designed to reduce the soil losses due to the complex interaction of mechanisms that interact within the soil erosion process. Soil erosion is an non-linear process, both spatially and temporally, and as a consequence of that only well-monitored and accurate measurements can give insights in the processes and how these processes can be influenced by management to reduce soil losses (Cerdà, 2007; Ligonja and Shrestha, 2015; Nanko et al., 2015; Seutloali and Beckedahl, 2015). This is necessary at different scales: pedon, slope, and watershed because the governing processes differ at different scale (Keesstra, 2007; Jordán and Martínez Zavala, 2008; Borrelli et al., 2015). Soil erosion plots can give information about the temporal and spatial variability of soil losses. We present here a strategy developed by the Soil Erosion and Degradation Research Group from the University of Valencia to assess the soil erosion rates in Eastern Spain. In 2002 the Soil Erosion Experimental Station in El Teularet-Sierra de Enguera was installed, to assess soil losses in rainfed agriculture orchards, and 73 plots of 1, 2, 4, 16 and 48 m2 were installed. In 2005 6 plots of 300 m2 were installed in the nearby Montesa soil erosion station to assess soil losses in citrus orchards. In 2011 16 plots of 2 m2 where installed in Les Alcusses to determine soil losses in olive orchards, and in 2015 8 plots in Celler del Roure vineyard to assess the impact of land management in vineyards and 8 plots in the El Teularet to study the impact of straw mulch on soil erosion rates. All erosion stations are located in several kilometres distance from each other. This research which we developed since 2002 is complementary to previous research where we used rainfall

Chemical composition of precipitation in adjacent forest and open plots

Energy Technology Data Exchange (ETDEWEB)

Madgwick, H A.I.; Ovington, J D

1959-01-01

The chemical composition of the precipitation in three open plots and under thirteen different forest canopies is compared for a 2-year period at an experimental forest in south-east England. The average contents of sodium, potassium, calcium, and magnesium in the precipitation in the open are 19, 3, 11, and less than 4 kg./ha./annum respectively, compared with 33, 24, 24, and 10 under the forest canopies. Only very small quantities of phosphorus were present in the precipitation. The data are discussed with particular reference to the nutrient cycles of forest stands, the removal of nutrients by logging, and the maintenance of soil fertility.

MMS control system analysis using automated root-locus plot generation

International Nuclear Information System (INIS)

Hefler, J.W.

1987-01-01

Use of the Modular Modeling System (MMS) for control systems improvement has been impeded by the need to plot eigenvalues manually. This problem has been solved by an automatic eigenvalue plotting routine. A practical procedure for control systems analysis based upon automatically generated root-locus plots has been developed using the Advanced Continuous Simulation Language (ACSL)-based version of the Modular Modeling System. Examples are given of typical ACSL run-time statements. Actual root-locus and time history plots are shown for simple models (4 state variables). More complex models are discussed. The plots show the control systems response before and after the determination of tuning parameters using the methods described

Air Data - Tile Plot

Science.gov (United States)

This tool plots daily AQI values for a specific location and time period. Each square or “tile” represents one day of the year and is color-coded based on the AQI level for that day. The legend tallies the number of days in each AQI category.

Forage quality and reindeer productivity: multiplier effects amplified by climate change

Science.gov (United States)

Merben R. Cebrian; Knut Kielland; Greg Finstad

2008-01-01

We investigated the effects of experimental manipulations of snowmelt on the flowering phenology and forage chemistry (digestibility and nitrogen concentration) of tussock cottongrass (Eriophonun vaginauoni) on the Seward Peninsula, Alaska. Early snowmelt accelerated reproductive phenology by 11 days, and resulted in higher floral digestibility...

Split-Plot Designs with Mirror Image Pairs as Subplots

DEFF Research Database (Denmark)

Tyssedal, John; Kulahci, Murat; Bisgaard, Soren

2011-01-01

In this article we investigate two-level split-plot designs where the sub-plots consist of only two mirror image trials. Assuming third and higher order interactions negligible, we show that these designs divide the estimated effects into two orthogonal sub-spaces, separating sub-plot main effects...... appealing with effects of major interest free from full aliasing assuming that 3rd and higher order interactions are negligible....

Plot-scale field experiment of surface hydrologic processes with EOS implications

Science.gov (United States)

Laymon, Charles A.; Macari, Emir J.; Costes, Nicholas C.

1992-01-01

Plot-scale hydrologic field studies were initiated at NASA Marshall Space Flight Center to a) investigate the spatial and temporal variability of surface and subsurface hydrologic processes, particularly as affected by vegetation, and b) develop experimental techniques and associated instrumentation methodology to study hydrologic processes at increasingly large spatial scales. About 150 instruments, most of which are remotely operated, have been installed at the field site to monitor ground atmospheric conditions, precipitation, interception, soil-water status, and energy flux. This paper describes the nature of the field experiment, instrumentation and sampling rationale, and presents preliminary findings.

PLOT3D Export Tool for Tecplot

Science.gov (United States)

Alter, Stephen

2010-01-01

The PLOT3D export tool for Tecplot solves the problem of modified data being impossible to output for use by another computational science solver. The PLOT3D Exporter add-on enables the use of the most commonly available visualization tools to engineers for output of a standard format. The exportation of PLOT3D data from Tecplot has far reaching effects because it allows for grid and solution manipulation within a graphical user interface (GUI) that is easily customized with macro language-based and user-developed GUIs. The add-on also enables the use of Tecplot as an interpolation tool for solution conversion between different grids of different types. This one add-on enhances the functionality of Tecplot so significantly, it offers the ability to incorporate Tecplot into a general suite of tools for computational science applications as a 3D graphics engine for visualization of all data. Within the PLOT3D Export Add-on are several functions that enhance the operations and effectiveness of the add-on. Unlike Tecplot output functions, the PLOT3D Export Add-on enables the use of the zone selection dialog in Tecplot to choose which zones are to be written by offering three distinct options - output of active, inactive, or all zones (grid blocks). As the user modifies the zones to output with the zone selection dialog, the zones to be written are similarly updated. This enables the use of Tecplot to create multiple configurations of a geometry being analyzed. For example, if an aircraft is loaded with multiple deflections of flaps, by activating and deactivating different zones for a specific flap setting, new specific configurations of that aircraft can be easily generated by only writing out specific zones. Thus, if ten flap settings are loaded into Tecplot, the PLOT3D Export software can output ten different configurations, one for each flap setting.

Analysis of discrepancies in Dalitz plot parameters in η→3π decay

International Nuclear Information System (INIS)

Kolesár, Marián

2011-01-01

We analyze the Dalitz plot parameters of η→3π decay in the framework of resummed chiral perturbation theory. This approach allows us to keep the uncertainties in the NNLO and higher orders under better control and estimate their influence. We cannot confirm the suspected discrepancy in the case of the charged decay parameter b, where even small uncertainties in higher orders could accommodate the difference. On the other hand, we find the experimental value of the neutral decay parameter α incompatible with an assumption of good convergence properties in the center of the Dalitz plot. We calculate ππ rescattering bubble corrections up to three loops and show that these might explain the discrepancy, especially for a low value of the pseudoscalar decay constant in the chiral limit. However, that could indicate a failure of convergence of the chiral series in this channel already at low energies around 500MeV.

PETRO.CALC.PLOT, Microsoft Excel macros to aid petrologic interpretation

Science.gov (United States)

Sidder, G.B.

1994-01-01

PETRO.CALC.PLOT is a package of macros which normalizes whole-rock oxide data to 100%, calculates the cation percentages and molecular proportions used for normative mineral calculations, computes the apices for ternary diagrams, determines sums and ratios of specific elements of petrologic interest, and plots 33 X-Y graphs and five ternary diagrams. PETRO.CALC.PLOT also may be used to create other diagrams as desired by the user. The macros run in Microsoft Excel 3.0 and 4.0 for Macintosh computers and in Microsoft Excel 3.0 and 4.0 for Windows. Macros provided in PETRO.CALC.PLOT minimize repetition and time required to recalculate and plot whole-rock oxide data for petrologic analysis. ?? 1994.

Plotting of bathythermograph transect data on a printer

Science.gov (United States)

Reynolds, James B.; McLain, Douglas R.

1971-01-01

A program for plotting bathythermograph transect data on a computer (IBM 1130) printer is available from the Great Lakes Fishery Laboratory. Temperature values are printed in positions proportional to their depths and distances from shore. Contour lines are drawn manually through the plotted points.

Privatization of Land Plot Under Integral Real Estate Complex

Directory of Open Access Journals (Sweden)

Maruchek A. A.

2014-10-01

Full Text Available The article deals with the questions concerning the privatization of a land plot under integral real estate complex. The authors come to conclusion that a number of legislation norms relating to privatization of a land plot do not take into account the construction of an integral real estate complex that could cause some problems in the realization of the right to privatization of the land plot

Plotting and Analyzing Data Trends in Ternary Diagrams Made Easy

Science.gov (United States)

John, Cédric M.

2004-04-01

Ternary plots are used in many fields of science to characterize a system based on three components. Triangular plotting is thus useful to a broad audience in the Earth sciences and beyond. Unfortunately, it is typically the most expensive commercial software packages that offer the option to plot data in ternary diagrams, and they lack features that are paramount to the geosciences, such as the ability to plot data directly into a standardized diagram and the possibility to analyze temporal and stratigraphic trends within this diagram. To address these issues, δPlot was developed with a strong emphasis on ease of use, community orientation, and availability free of charges. This ``freeware'' supports a fully graphical user interface where data can be imported as text files, or by copying and pasting. A plot is automatically generated, and any standard diagram can be selected for plotting in the background using a simple pull-down menu. Standard diagrams are stored in an external database of PDF files that currently holds some 30 diagrams that deal with different fields of the Earth sciences. Using any drawing software supporting PDF, one can easily produce new standard diagrams to be used with δPlot by simply adding them to the library folder. An independent column of values, commonly stratigraphic depths or ages, can be used to sort the data sets.

Slope Stability of Geosynthetic Clay Liner Test Plots

Science.gov (United States)

Fourteen full-scale field test plots containing five types of geosynthetic clay liners (GCLs) were constructed on 2H:IV and 3H:IV slopes for the purpose of assessing slope stability. The test plots were designed to simulate typical final cover systems for landfill. Slides occurr...

THE EFFECT OF FIRES ON FOREST ECOSYSTEMS CLUSTER PLOT OF ‘PODZAPLOTY’ OF THE RESERVE ‘KHAKASSKY’

Directory of Open Access Journals (Sweden)

V. V. Shurkina

2016-12-01

Full Text Available In this article the questions of the exposure fires on forest ecosystems cluster plot of ‘Podzaploty’ of the reserve ‘Khakassky’. Identified and analyzed changes occurring in ecosystems as a result of fires. On the basis of experimental materials the changes in the tree layer and forest litter.

Chain Plot: A Tool for Exploiting Bivariate Temporal Structures

OpenAIRE

Taylor, CC; Zempeni, A

2004-01-01

In this paper we present a graphical tool useful for visualizing the cyclic behaviour of bivariate time series. We investigate its properties and link it to the asymmetry of the two variables concerned. We also suggest adding approximate confidence bounds to the points on the plot and investigate the effect of lagging to the chain plot. We conclude our paper by some standard Fourier analysis, relating and comparing this to the chain plot.

9 CFR 108.2 - Plot plans, blueprints, and legends required.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Plot plans, blueprints, and legends... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.2 Plot plans, blueprints, and legends required. Each applicant for an establishment license shall prepare a plot plan showing all buildings for each particular land...

User manual for two simple postscript output FORTRAN plotting routines

Science.gov (United States)

Nguyen, T. X.

1991-01-01

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Intelligence Constraints on Terrorist Network Plots

Science.gov (United States)

Woo, Gordon

Since 9/11, the western intelligence and law enforcement services have managed to interdict the great majority of planned attacks against their home countries. Network analysis shows that there are important intelligence constraints on the number and complexity of terrorist plots. If two many terrorists are involved in plots at a given time, a tipping point is reached whereby it becomes progressively easier for the dots to be joined and for the conspirators to be arrested, and for the aggregate evidence to secure convictions. Implications of this analysis are presented for the campaign to win hearts and minds.

Multilocational evaluation of white yam genotypes using GGE bi-plot ...

African Journals Online (AJOL)

Five new white yam genotypes were evaluated in different locations of major yam producing areas; Umudike, Nsukka, Ubiaja, Abuja and Katsina-Ala, to test the performance and stability of these genotypes across the environments using GGE bi-plot software. The GGE bi-plot generated several graphic bi-plots which ...

On-plot drinking water supplies and health: A systematic review.

Science.gov (United States)

Overbo, Alycia; Williams, Ashley R; Evans, Barbara; Hunter, Paul R; Bartram, Jamie

2016-07-01

Many studies have found that household access to water supplies near or within the household plot can reduce the probability of diarrhea, trachoma, and other water-related diseases, and it is generally accepted that on-plot water supplies produce health benefits for households. However, the body of research literature has not been analyzed to weigh the evidence supporting this. A systematic review was conducted to investigate the impacts of on-plot water supplies on diarrhea, trachoma, child growth, and water-related diseases, to further examine the relationship between household health and distance to water source and to assess whether on-plot water supplies generate health gains for households. Studies provide evidence that households with on-plot water supplies experience fewer diarrheal and helminth infections and greater child height. Findings suggest that water-washed (hygiene associated) diseases are more strongly impacted by on-plot water access than waterborne diseases. Few studies analyzed the effects of on-plot water access on quantity of domestic water used, hygiene behavior, and use of multiple water sources, and the lack of evidence for these relationships reveals an important gap in current literature. The review findings indicate that on-plot water access is a useful health indicator and benchmark for the progressive realization of the Sustainable Development Goal target of universal safe water access as well as the human right to safe water. Copyright © 2016 Elsevier GmbH. All rights reserved.

6th International Symposium on Recurrence Plots

CERN Document Server

Jr, Jr; Ioana, Cornel; Marwan, Norbert

2016-01-01

The chapters in this book originate from the research work and contributions presented at the Sixth International Symposium on Recurrence Plots held in Grenoble, France in June 2015. Scientists from numerous disciplines gathered to exchange knowledge on recent applications and developments in recurrence plots and recurrence quantification analysis. This meeting was remarkable because of the obvious expansion of recurrence strategies (theory) and applications (practice) into ever-broadening fields of science. It discusses real-world systems from various fields, including mathematics, strange attractors, applied physics, physiology, medicine, environmental and earth sciences, as well as psychology and linguistics. Even readers not actively researching any of these particular systems will benefit from discovering how other scientists are finding practical non-linear solutions to specific problems. The book is of interest to an interdisciplinary audience of recurrence plot users and researchers interested in time...

Information extraction from FN plots of tungsten microemitters.

Science.gov (United States)

Mussa, Khalil O; Mousa, Marwan S; Fischer, Andreas

2013-09-01

Tungsten based microemitter tips have been prepared both clean and coated with dielectric materials. For clean tungsten tips, apex radii have been varied ranging from 25 to 500 nm. These tips were manufactured by electrochemical etching a 0.1 mm diameter high purity (99.95%) tungsten wire at the meniscus of two molar NaOH solution. Composite micro-emitters considered here are consisting of a tungsten core coated with different dielectric materials-such as magnesium oxide (MgO), sodium hydroxide (NaOH), tetracyanoethylene (TCNE), and zinc oxide (ZnO). It is worthwhile noting here, that the rather unconventional NaOH coating has shown several interesting properties. Various properties of these emitters were measured including current-voltage (IV) characteristics and the physical shape of the tips. A conventional field emission microscope (FEM) with a tip (cathode)-screen (anode) separation standardized at 10 mm was used to electrically characterize the electron emitters. The system was evacuated down to a base pressure of ∼10(-8) mbar when baked at up to ∼180 °C overnight. This allowed measurements of typical field electron emission (FE) characteristics, namely the IV characteristics and the emission images on a conductive phosphorus screen (the anode). Mechanical characterization has been performed through a FEI scanning electron microscope (SEM). Within this work, the mentioned experimental results are connected to the theory for analyzing Fowler-Nordheim (FN) plots. We compared and evaluated the data extracted from clean tungsten tips of different radii and determined deviations between the results of different extraction methods applied. In particular, we derived the apex radii of several clean and coated tungsten tips by both SEM imaging and analyzing FN plots. The aim of this analysis is to support the ongoing discussion on recently developed improvements of the theory for analyzing FN plots related to metal field electron emitters, which in particular

Diet Switching by Mammalian Herbivores in Response to Exotic Grass Invasion.

Directory of Open Access Journals (Sweden)

Carolina Bremm

Full Text Available Invasion by exotic grasses is a severe threat to the integrity of grassland ecosystems all over the world. Because grasslands are typically grazed by livestock and wildlife, the invasion is a community process modulated by herbivory. We hypothesized that the invasion of native South American grasslands by Eragrostis plana Nees, an exotic tussock-forming grass from Africa, could be deterred by grazing if grazers switched dietary preferences and included the invasive grass as a large proportion of their diets. Bos taurus (heifers and Ovis aries (ewes grazed plots with varying degrees of invasion by E. plana in a replicated manipulative experiment. Animal positions and species grazed were observed every minute in 45-min grazing session. Proportion of bites and steps in and out of E. plana tussocks were measured and used to calculate several indices of selectivity. Both heifers and ewes exhibited increasing probability of grazing E. plana as the proportion of area covered by tussocks increased, but they behaved differently. In agreement with expectations based on the allometry of dietary preferences and morphology, ewes consumed a low proportion of E. plana, except in areas that had more than 90% E. plana cover. Heifers consumed proportionally more E. plana than ewes. Contrary to our hypothesis, herbivores did not exhibit dietary switching towards the invasive grass. Moreover, they exhibited avoidance of the invasive grass and preference for short-statured native species, both of which should tend to enhance invasion. Unless invasive plants are highly palatable to livestock, the effect of grazing to deter the invasion is limited, due to the inherent avoidance of the invasive grass by the main grazers in the ecosystem, particularly sheep.

THERAPIE - THErmix-RAps-Plot-InterfacE. A graphic software for representation of THERMIX-2D results with the interactive plot program RAPS

International Nuclear Information System (INIS)

Duensing, P.; Jahn, W.; Rehm, W.

1986-09-01

The performance of safety analyses for gas-cooled high temperature reactor power plants requires efficient plot codes for the evaluation and representation of computer results. The report describes the coupling between the thermodynamic simulation code THERMIX and the graphic plot code RAPS via the interface program THERAPIE. Especially the structure and the handling of the interface program are explained as well as the dialogue with the plot code. Further options of the colour graphic system are demonstrated for the representation of temperature distributions in components of HTR concepts (HTR-500). (orig.) [de

Iron status determination in pregnancy using the Thomas plot.

Science.gov (United States)

Weyers, R; Coetzee, M J; Nel, M

2016-04-01

Physiological changes during pregnancy affect routine tests for iron deficiency. The reticulocyte haemoglobin equivalent (RET-He) and serum-soluble transferrin receptor (sTfR) assay are newer diagnostic parameters for the detection of iron deficiency, combined in the Thomas diagnostic plot. We used this plot to determine the iron status of pregnant women presenting for their first visit to an antenatal clinic in Bloemfontein, South Africa. Routine laboratory tests (serum ferritin, full blood count and C-reactive protein) and RET-He and sTfR were performed. The iron status was determined using the Thomas plot. For this study, 103 pregnant women were recruited. According to the Thomas plot, 72.8% of the participants had normal iron stores and erythropoiesis. Iron-deficient erythropoiesis was detected in 12.6%. A third of participants were anaemic. Serum ferritin showed excellent sensitivity but poor specificity for detecting depleted iron stores. HIV status had no influence on the iron status of the participants. Our findings reiterate that causes other than iron deficiency should be considered in anaemic individuals. When compared with the Thomas plot, a low serum ferritin is a sensitive but nonspecific indicator of iron deficiency. The Thomas plot may provide useful information to identify pregnant individuals in whom haematologic parameters indicate limited iron availability for erythropoiesis. © 2015 John Wiley & Sons Ltd.

Myth Structure and Media Fiction Plot: An Exploration.

Science.gov (United States)

Harless, James D.

Based on the general research of Joseph Campbell in adventure plots from mythology, the author explores the simplified monomyth plots currently in frequent use in mass media programing. The close relationship of media fiction to mythic stories is established through the analysis of more than 25 stories resulting from media broadcasting. The media…

Multiple plots in R

DEFF Research Database (Denmark)

Edwards, Stefan McKinnon

2012-01-01

In this chapter I will investigate how to combine multiple plots into a single. The scenario is a dataset of a series of measurements, on three samples in three situations. There are many ways we can display this, e.g. 3d graphs or faceting. 3d graphs are not good for displaying static data so we...

[Comparative quality measurements part 3: funnel plots].

Science.gov (United States)

Kottner, Jan; Lahmann, Nils

2014-02-01

Comparative quality measurements between organisations or institutions are common. Quality measures need to be standardised and risk adjusted. Random error must also be taken adequately into account. Rankings without consideration of the precision lead to flawed interpretations and enhances "gaming". Application of confidence intervals is one possibility to take chance variation into account. Funnel plots are modified control charts based on Statistical Process Control (SPC) theory. The quality measures are plotted against their sample size. Warning and control limits that are 2 or 3 standard deviations from the center line are added. With increasing group size the precision increases and so the control limits are forming a funnel. Data points within the control limits are considered to show common cause variation; data points outside special cause variation without the focus of spurious rankings. Funnel plots offer data based information about how to evaluate institutional performance within quality management contexts.

Surveillance of Site A and Plot M

International Nuclear Information System (INIS)

Golchert, N.W.

1993-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1992 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) determine the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity

Surveillance of Site A and Plot M

International Nuclear Information System (INIS)

Golchert, N.W.

1991-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1990 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to determine the migration pathway of water from the burial ground (plot M) to the hand-pumped picnic wells, establish if buries radionuclides other than hydrogen-3 have migrated, and generally characterize the radiological environment of the area. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continues to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site or those living in the vicinity. 20 refs., 7 figs., 15 tabs

The 2002 RPA Plot Summary database users manual

Science.gov (United States)

Patrick D. Miles; John S. Vissage; W. Brad Smith

2004-01-01

Describes the structure of the RPA 2002 Plot Summary database and provides information on generating estimates of forest statistics from these data. The RPA 2002 Plot Summary database provides a consistent framework for storing forest inventory data across all ownerships across the entire United States. The data represents the best available data as of October 2001....

Modeling the washoff of 90Sr and 137Cs from an experimental plot established in the vicinity of the Chernobyl reactor.

Science.gov (United States)

Nair, S K; Hoffman, F O; Thiessen, K M; Konoplev, A V

1996-12-01

After the Chernobyl event, a large area of land was contaminated following the deposition of radionuclides. This area became a continuing source of radionuclides to natural waters and aquatic ecosystems. In 1986, an experimental plot was constructed in a contaminated area near the Chernobyl Nuclear Power Plant to study the washoff of radionuclides by surface runoff. Concentrations of 137Cs and 90Sr were measured in the top 10 cm of the soil prior to the experiments. During two separate experiments, intense artificial rainfall was applied to the plot. A washoff scenario was then prepared with site-specific information on initial soil contamination, duration and quantities of rainfall and runoff, physicochemical properties of the topsoil, and some climatological data. Modelers were asked to predict (a) the vertical distributions of the initial concentrations of 137Cs and 90Sr in various chemical forms in the topsoil, (b) concentrations of these radionuclides in various chemical forms in the runoff water during each experiment, and (c) the total amounts of these radionuclides that were washed off during each experiment. Stochastically generated local rainfall data were used in a water budget model to generate annual average runoff and infiltration rates. A vertical, one-dimensional, multiphase, multispecies transport model was then developed to simulate the movement of contaminants in the topsoil during the 160-d period between the Chernobyl event and the experiments as well as the washouts of contaminants by runoff during the experiments and during the 24-h period thereafter. The model provided very good predictions of the vertical distributions of total contaminant concentrations in the top 10 cm of the soil; however, the concentrations in individual chemical forms were not predicted as accurately. Initially, the model overpredicted the washout of contaminants for the two experiments and the 24-h period thereafter. Fraction of runoff that flows as interflow and

Hydrological Processes Simulation at Plot Scale Using The Smap Model In The Semiarid | Simulação de processos hidrológicos na escala de lotes usando o modelo Smap em semi-árido

Directory of Open Access Journals (Sweden)

Iug Lopes

2017-06-01

Full Text Available Vegetation cover plays an important role on overland flow generation and erosion, directly impacting infiltration and soil water storage. The objective of this study was to investigate hydrological processes and soil moisture dynamics through conceptual modelling in intensively monitored experimental plots under natural rainfall with different soil cover conditions, in the Brazilian semiarid. Soil moisture was monthly monitored using a CPN 503 DR Neutron Probe device. Calibration curves previously defined were adopted for moisture assessment. Four experimental soil cover treatment were established: Cactus “Palma” barriers (PB; mulching (MC; Bare soil (BS and natural vegetation cover (NC. Nash-Sutcliffe (ENS coefficient and PBIAS index were adopted to assess hydrological processes analysis. The SMAP model successfully predicted the flow and humidity of the experimental plots for the natural cover and Mulching coverage, with a global ENS index of over 0.877. Scenarios of changes in soil cover have dramatically affected the modeling of water resources in the plots. The present study was important to improve the understanding and distinct hydrological processes relevance under different cover conditions in experimental plots in the semiarid.

Online plot services for paleomagnetism and rock magnetism

Science.gov (United States)

Hatakeyama, T.

2017-12-01

In paleomagnetism and rock magnetism, a lot of types of original plots are used for obtained data from measurements. Many researchers in paleomagnetism often use not only general-purpose plotting programs such as Microsoft Excel but also single-purpose tools. A large benefit of using the latter tools is that we can make a beautiful figure for our own data. However, those programs require specific environment for their operation such as type of hardware and platform, type of operation system and its version, libraries for execution and so on. Therefore, it is difficult to share the result and graphics among the collaborators who use different environments on their PCs. Thus, one of the best solution is likely a program operated on popular environment. The most popular is web environment as we all know. Almost all current operating systems have web browsers as standard and all people use them regularly. Now we provide a web-based service plotting paleomagnetic results easily.We develop original programs with a command-line user interface (non-GUI), and we prepared web pages for input of the simple measured data and options and a wrapper script which transfers the entered values to the program. The results, analyzed values and plotted graphs from the program are shown in the HTML page and downloadable. Our plot services are provided in http://mage-p.org/mageplot/. In this talk, we introduce our program and service and discuss the philosophy and efficiency of these services.

PRP: a FORTRAN IV interactive plotting program

Science.gov (United States)

Andrew, A. S.; Linde, J.

A computer program, PRP, has been designed to plot any arithmetic combination selected from a set of major and trace element data on a y- x graph. y and x are defined and entered as a program string (y, x) which is interpreted sequentially. Operators ( +, -, ∗, /, ( unary) , square root, log 10, In c, antilog 10, exponential, integer, absolute value, (,),,) and integer or real numbers may be included. Axis lengths and scales are determined by the user. Five different plotting symbols are available.

Analysing spatially extended high-dimensional dynamics by recurrence plots

Energy Technology Data Exchange (ETDEWEB)

Marwan, Norbert, E-mail: marwan@pik-potsdam.de [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Kurths, Jürgen [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Humboldt Universität zu Berlin, Institut für Physik (Germany); Nizhny Novgorod State University, Department of Control Theory, Nizhny Novgorod (Russian Federation); Foerster, Saskia [GFZ German Research Centre for Geosciences, Section 1.4 Remote Sensing, Telegrafenberg, 14473 Potsdam (Germany)

2015-05-08

Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. In this letter we show the potential of selected recurrence plot measures for the investigation of even high-dimensional dynamics. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analysing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world. - Highlights: • We use recurrence plots for analysing partially extended dynamics. • We investigate the high-dimensional chaos of the Lorenz96 model. • The approach distinguishes different spatio-temporal dynamics. • We use the method for studying vegetation cover time series.

Selection of Plot Remeasurement in an Annual Inventory

Science.gov (United States)

Mark H. Hansen; Hans T. Schreuder; Dave Heinzen

2000-01-01

A plot selection approach is proposed based on experience from the Annual Forest Inventory System (AFIS) in the Aspen-Birch Unit of northestern Minnesota. The emphasisis on a mixture of strategies. Although the Agricultural Act of 1998 requires that a fixed 20 percent of plots be measured each year in each state, sooner or later we will need to vary the scheme to...

Surface stabilization and revegetation test plots

International Nuclear Information System (INIS)

Sackschewsky, M.R.; Kemp, C.J.; Hayward, W.M.

1993-09-01

Westinghouse Hanford Company Decommissioning and Decontamination Engineering Group and Environmental Technology and Assessment Groups are developing new technologies to improve revegetation techniques for interim stabilization control over underground waste sites within the Radiation Area Remedial Action Program. Successful revegetation is an integral aspect of waste isolation strategy. Unfortunately, revegetation can be very difficult to achieve on the Hanford Site due to several factors: low annual precipitation, unpredictable timing of precipitation, low fertility of available soils, and coarse physical texture of soils covering waste sites. The tests in this report were performed during fiscal years 1992 and 1993 and include the use of two soil sealants in combination with bare soil and a soil/compost mixture and a comparison of a wheatgrass mixture and a native seed mixture. Hydroprobe access ports were placed in one-half of the test plots and moisture data was collected. Soil fertility and plant community characteristics were monitored during the two years of the test. During the first year all sites with compost provided additional fertility and retained greater amounts of soil moisture than noncomposted sites. The use of Enduraseal soil fixative provided greater soil moisture than the use of Aerospray-77 soil fixative. During the second year the use of compost and soil fixative's had a lesser effect on soil moisture. During late summer periods all treatments had very similar soil moisture profiles. The use of compost greatly increased vegetative cover and soil fertility in comparison to sites that had no compost added. Testing of the seed mixtures found that Siberian wheatgrass and Sandberg's bluegrass were the most dominant of the seeded species observed. All plots exhibited a dominant plant cover of volunteer cheatgrass. Biomass production was significantly greater on plots with compost than on the noncomposted plots

Experimental studies on caisson-type porous seawalls

Science.gov (United States)

Zhu, Shutang; Chwang, A. T.

2002-08-01

This paper presents experimental studies on the reflection characteristics of caisson-type porous seawalls under designed wave conditions. The results of physical model experiments are plotted and discussed. Comparisons between experimental results and analytical predictions are also made and the agreement is found to be very good.

The Use of Plackett-Burman Designs to Construct Split Plot Designs.

NARCIS (Netherlands)

Kulahci, M.; Bisgaard, S.

2005-01-01

Abstract When some factors are hard to change and others are relatively easier, split-plot experiments are often an economic alternative to fully randomized designs. Split-plot experiments, with their structure of subplot arrays imbedded within whole-plot arrays, have a tendency to become large,

Scaling wood volume estimates from inventory plots to landscapes with airborne LiDAR in temperate deciduous forest

Directory of Open Access Journals (Sweden)

Shaun R. Levick

2016-05-01

Full Text Available Abstract Background Monitoring and managing carbon stocks in forested ecosystems requires accurate and repeatable quantification of the spatial distribution of wood volume at landscape to regional scales. Grid-based forest inventory networks have provided valuable records of forest structure and dynamics at individual plot scales, but in isolation they may not represent the carbon dynamics of heterogeneous landscapes encompassing diverse land-management strategies and site conditions. Airborne LiDAR has greatly enhanced forest structural characterisation and, in conjunction with field-based inventories, it provides avenues for monitoring carbon over broader spatial scales. Here we aim to enhance the integration of airborne LiDAR surveying with field-based inventories by exploring the effect of inventory plot size and number on the relationship between field-estimated and LiDAR-predicted wood volume in deciduous broad-leafed forest in central Germany. Results Estimation of wood volume from airborne LiDAR was most robust (R2 = 0.92, RMSE = 50.57 m3 ha−1 ~14.13 Mg C ha−1 when trained and tested with 1 ha experimental plot data (n = 50. Predictions based on a more extensive (n = 1100 plot network with considerably smaller (0.05 ha plots were inferior (R2 = 0.68, RMSE = 101.01 ~28.09 Mg C ha−1. Differences between the 1 and 0.05 ha volume models from LiDAR were negligible however at the scale of individual land-management units. Sample size permutation tests showed that increasing the number of inventory plots above 350 for the 0.05 ha plots returned no improvement in R2 and RMSE variability of the LiDAR-predicted wood volume model. Conclusions Our results from this study confirm the utility of LiDAR for estimating wood volume in deciduous broad-leafed forest, but highlight the challenges associated with field plot size and number in establishing robust relationships between airborne LiDAR and field derived wood volume. We

Scaling wood volume estimates from inventory plots to landscapes with airborne LiDAR in temperate deciduous forest.

Science.gov (United States)

Levick, Shaun R; Hessenmöller, Dominik; Schulze, E-Detlef

2016-12-01

Monitoring and managing carbon stocks in forested ecosystems requires accurate and repeatable quantification of the spatial distribution of wood volume at landscape to regional scales. Grid-based forest inventory networks have provided valuable records of forest structure and dynamics at individual plot scales, but in isolation they may not represent the carbon dynamics of heterogeneous landscapes encompassing diverse land-management strategies and site conditions. Airborne LiDAR has greatly enhanced forest structural characterisation and, in conjunction with field-based inventories, it provides avenues for monitoring carbon over broader spatial scales. Here we aim to enhance the integration of airborne LiDAR surveying with field-based inventories by exploring the effect of inventory plot size and number on the relationship between field-estimated and LiDAR-predicted wood volume in deciduous broad-leafed forest in central Germany. Estimation of wood volume from airborne LiDAR was most robust (R 2  = 0.92, RMSE = 50.57 m 3 ha -1  ~14.13 Mg C ha -1 ) when trained and tested with 1 ha experimental plot data (n = 50). Predictions based on a more extensive (n = 1100) plot network with considerably smaller (0.05 ha) plots were inferior (R 2  = 0.68, RMSE = 101.01 ~28.09 Mg C ha -1 ). Differences between the 1 and 0.05 ha volume models from LiDAR were negligible however at the scale of individual land-management units. Sample size permutation tests showed that increasing the number of inventory plots above 350 for the 0.05 ha plots returned no improvement in R 2 and RMSE variability of the LiDAR-predicted wood volume model. Our results from this study confirm the utility of LiDAR for estimating wood volume in deciduous broad-leafed forest, but highlight the challenges associated with field plot size and number in establishing robust relationships between airborne LiDAR and field derived wood volume. We are moving into a forest management era where

Computing Optimal Mixed Strategies for Terrorist Plot Detection Games with the Consideration of Information Leakage

Directory of Open Access Journals (Sweden)

Li MingChu

2017-01-01

Full Text Available The terrorist’s coordinated attack is becoming an increasing threat to western countries. By monitoring potential terrorists, security agencies are able to detect and destroy terrorist plots at their planning stage. Therefore, an optimal monitoring strategy for the domestic security agency becomes necessary. However, previous study about monitoring strategy generation fails to consider the information leakage, due to hackers and insider threat. Such leakage events may lead to failure of watching potential terrorists and destroying the plot, and cause a huge risk to public security. This paper makes two major contributions. Firstly, we develop a new Stackelberg game model for the security agency to generate optimal monitoring strategy with the consideration of information leakage. Secondly, we provide a double-oracle framework DO-TPDIL for calculation effectively. The experimental result shows that our approach can obtain robust strategies against information leakage with high feasibility and efficiency.

Splatterplots: overcoming overdraw in scatter plots.

Science.gov (United States)

Mayorga, Adrian; Gleicher, Michael

2013-09-01

We introduce Splatterplots, a novel presentation of scattered data that enables visualizations that scale beyond standard scatter plots. Traditional scatter plots suffer from overdraw (overlapping glyphs) as the number of points per unit area increases. Overdraw obscures outliers, hides data distributions, and makes the relationship among subgroups of the data difficult to discern. To address these issues, Splatterplots abstract away information such that the density of data shown in any unit of screen space is bounded, while allowing continuous zoom to reveal abstracted details. Abstraction automatically groups dense data points into contours and samples remaining points. We combine techniques for abstraction with perceptually based color blending to reveal the relationship between data subgroups. The resulting visualizations represent the dense regions of each subgroup of the data set as smooth closed shapes and show representative outliers explicitly. We present techniques that leverage the GPU for Splatterplot computation and rendering, enabling interaction with massive data sets. We show how Splatterplots can be an effective alternative to traditional methods of displaying scatter data communicating data trends, outliers, and data set relationships much like traditional scatter plots, but scaling to data sets of higher density and up to millions of points on the screen.

Standardized mean differences cause funnel plot distortion in publication bias assessments.

Science.gov (United States)

Zwetsloot, Peter-Paul; Van Der Naald, Mira; Sena, Emily S; Howells, David W; IntHout, Joanna; De Groot, Joris Ah; Chamuleau, Steven Aj; MacLeod, Malcolm R; Wever, Kimberley E

2017-09-08

Meta-analyses are increasingly used for synthesis of evidence from biomedical research, and often include an assessment of publication bias based on visual or analytical detection of asymmetry in funnel plots. We studied the influence of different normalisation approaches, sample size and intervention effects on funnel plot asymmetry, using empirical datasets and illustrative simulations. We found that funnel plots of the Standardized Mean Difference (SMD) plotted against the standard error (SE) are susceptible to distortion, leading to overestimation of the existence and extent of publication bias. Distortion was more severe when the primary studies had a small sample size and when an intervention effect was present. We show that using the Normalised Mean Difference measure as effect size (when possible), or plotting the SMD against a sample size-based precision estimate, are more reliable alternatives. We conclude that funnel plots using the SMD in combination with the SE are unsuitable for publication bias assessments and can lead to false-positive results.

How much information is contained in a recurrence plot?

International Nuclear Information System (INIS)

Thiel, Marco; Romano, M. Carmen; Kurths, Juergen

2004-01-01

Recurrence plots have recently been recognized as a powerful tool for the analysis of data. Not only the visualization of structures of the time series but also the possibility to estimate invariants from them and the possibility to analyze non-stationary data sets are remarkable. However, the question of how much information is encoded in such a two-dimensional and binary representation has not been discussed so far. In this Letter we show that - under some conditions - it is possible to reconstruct an attractor from the recurrence plot, at least topologically. This means that all relevant dynamical information is contained in the plot

TAURUS, Post-processor of 3-D Finite Elements Plots

International Nuclear Information System (INIS)

Brown, B.E.; Hallquist, J.O.; Kennedy, T.

2002-01-01

Description of program or function: TAURUS reads the binary plot files generated by the LLNL three-dimensional finite element analysis codes, NIKE3D (NESC 9725), DYNA3D (NESC 9909), TACO3D (NESC 9838), TOPAZ3D (NESC9599) and GEMINI and plots contours, time histories, and deformed shapes. Contours of a large number of quantities may be plotted on meshes consisting of plate, shell, and solid type elements. TAURUS can compute a variety of strain measures, reaction forces along constrained boundaries, and momentum. TAURUS has three phases: initialization, geometry display with contouring, and time history processing

9 CFR 108.6 - Revision of plot plans, blueprints, and legends.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Revision of plot plans, blueprints... FACILITY REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.6 Revision of plot plans, blueprints, and legends... changes affecting the workflow are to be made. The licensee shall: (a) Prepare revised plot plans...

Generalised recurrence plot analysis for spatial data

International Nuclear Information System (INIS)

Marwan, Norbert; Kurths, Juergen; Saparin, Peter

2007-01-01

Recurrence plot based methods are highly efficient and widely accepted tools for the investigation of time series or one-dimensional data. We present an extension of the recurrence plots and their quantifications in order to study recurrent structures in higher-dimensional spatial data. The capability of this extension is illustrated on prototypical 2D models. Next, the tested and proved approach is applied to assess the bone structure from CT images of human proximal tibia. We find that the spatial structures in trabecular bone become more recurrent during the bone loss in osteoporosis

D.3.3 PLOT Persuasive Learning Design Framework

DEFF Research Database (Denmark)

Gram-Hansen, Sandra Burri

2012-01-01

In this third and final deliverable of WP3: Persuasive Learning Designs, the theoretical cross field between persuasion and learning and the practical analysis of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool......, are linked together as persuasive learning designs are defined and exemplified through the four e-PLOT cases. Based on the literary study of D.3.1 as well as the subsequent discussions and reflections regarding the theoretical foundation and practical application of persuasive learning technologies......-PLOT work cases. In conclusion, the report presents a number of suggestions regarding the improvement of the two learning tools, which from a theoretical perspective will enhance the persuasive potential, and which can be taken into consideration in WP4 and 5....

9 CFR 108.7 - Filing of plot plans, blueprints, and legends.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Filing of plot plans, blueprints, and... REQUIREMENTS FOR LICENSED ESTABLISHMENTS § 108.7 Filing of plot plans, blueprints, and legends. Three copies of all plot plans, blueprints, and legends, including revisions, shall be submitted to Animal and Plant...

SEGY to ASCII Conversion and Plotting Program 2.0

Science.gov (United States)

Goldman, Mark R.

2005-01-01

INTRODUCTION SEGY has long been a standard format for storing seismic data and header information. Almost every seismic processing package can read and write seismic data in SEGY format. In the data processing world, however, ASCII format is the 'universal' standard format. Very few general-purpose plotting or computation programs will accept data in SEGY format. The software presented in this report, referred to as SEGY to ASCII (SAC), converts seismic data written in SEGY format (Barry et al., 1975) to an ASCII data file, and then creates a postscript file of the seismic data using a general plotting package (GMT, Wessel and Smith, 1995). The resulting postscript file may be plotted by any standard postscript plotting program. There are two versions of SAC: one version for plotting a SEGY file that contains a single gather, such as a stacked CDP or migrated section, and a second version for plotting multiple gathers from a SEGY file containing more than one gather, such as a collection of shot gathers. Note that if a SEGY file has multiple gathers, then each gather must have the same number of traces per gather, and each trace must have the same sample interval and number of samples per trace. SAC will read several common standards of SEGY data, including SEGY files with sample values written in either IBM or IEEE floating-point format. In addition, utility programs are present to convert non-standard Seismic Unix (.sux) SEGY files and PASSCAL (.rsy) SEGY files to standard SEGY files. SAC allows complete user control over all plotting parameters including label size and font, tick mark intervals, trace scaling, and the inclusion of a title and descriptive text. SAC shell scripts create a postscript image of the seismic data in vector rather than bitmap format, using GMT's pswiggle command. Although this can produce a very large postscript file, the image quality is generally superior to that of a bitmap image, and commercial programs such as Adobe Illustrator

Model-independent plot of dynamic PET data facilitates data interpretation and model selection.

Science.gov (United States)

Munk, Ole Lajord

2012-02-21

When testing new PET radiotracers or new applications of existing tracers, the blood-tissue exchange and the metabolism need to be examined. However, conventional plots of measured time-activity curves from dynamic PET do not reveal the inherent kinetic information. A novel model-independent volume-influx plot (vi-plot) was developed and validated. The new vi-plot shows the time course of the instantaneous distribution volume and the instantaneous influx rate. The vi-plot visualises physiological information that facilitates model selection and it reveals when a quasi-steady state is reached, which is a prerequisite for the use of the graphical analyses by Logan and Gjedde-Patlak. Both axes of the vi-plot have direct physiological interpretation, and the plot shows kinetic parameter in close agreement with estimates obtained by non-linear kinetic modelling. The vi-plot is equally useful for analyses of PET data based on a plasma input function or a reference region input function. The vi-plot is a model-independent and informative plot for data exploration that facilitates the selection of an appropriate method for data analysis. Copyright © 2011 Elsevier Ltd. All rights reserved.

Atrial fibrillation detection by heart rate variability in Poincare plot.

Science.gov (United States)

Park, Jinho; Lee, Sangwook; Jeon, Moongu

2009-12-11

Atrial fibrillation (AFib) is one of the prominent causes of stroke, and its risk increases with age. We need to detect AFib correctly as early as possible to avoid medical disaster because it is likely to proceed into a more serious form in short time. If we can make a portable AFib monitoring system, it will be helpful to many old people because we cannot predict when a patient will have a spasm of AFib. We analyzed heart beat variability from inter-beat intervals obtained by a wavelet-based detector. We made a Poincare plot using the inter-beat intervals. By analyzing the plot, we extracted three feature measures characterizing AFib and non-AFib: the number of clusters, mean stepping increment of inter-beat intervals, and dispersion of the points around a diagonal line in the plot. We divided distribution of the number of clusters into two and calculated mean value of the lower part by k-means clustering method. We classified data whose number of clusters is more than one and less than this mean value as non-AFib data. In the other case, we tried to discriminate AFib from non-AFib using support vector machine with the other feature measures: the mean stepping increment and dispersion of the points in the Poincare plot. We found that Poincare plot from non-AFib data showed some pattern, while the plot from AFib data showed irregularly irregular shape. In case of non-AFib data, the definite pattern in the plot manifested itself with some limited number of clusters or closely packed one cluster. In case of AFib data, the number of clusters in the plot was one or too many. We evaluated the accuracy using leave-one-out cross-validation. Mean sensitivity and mean specificity were 91.4% and 92.9% respectively. Because pulse beats of ventricles are less likely to be influenced by baseline wandering and noise, we used the inter-beat intervals to diagnose AFib. We visually displayed regularity of the inter-beat intervals by way of Poincare plot. We tried to design an

The impact of tropospheric ozone pollution on trial plot winter wheat yields in Great Britain - An econometric approach

International Nuclear Information System (INIS)

Kaliakatsou, Evridiki; Bell, J. Nigel B.; Thirtle, Colin; Rose, Daniel; Power, Sally A.

2010-01-01

Numerous experiments have demonstrated reductions in the yields of cereal crops due to tropospheric O 3 , with losses of up to 25%. However, the only British econometric study on O 3 impacts on winter wheat yields, found that a 10% increase in AOT40 would decrease yields by only 0.23%. An attempt is made here to reconcile these observations by developing AOT40 maps for Great Britain and matching levels with a large number of standardised trial plot wheat yields from many sites over a 13-year period. Panel estimates (repeated measures on the same plots with time) show a 0.54% decrease in yields and it is hypothesised that plant breeders may have inadvertently selected for O 3 tolerance in wheat. Some support for this is provided by fumigations of cultivars of differing introduction dates. A case is made for the use of econometric as well as experimental studies in prediction of air pollution induced crop loss. - Econometric study of British winter wheat trial plot data suggests lower economic loss than predicted from experiments.

Information extraction from FN plots of tungsten microemitters

Energy Technology Data Exchange (ETDEWEB)

Mussa, Khalil O. [Department of Physics, Mu' tah University, Al-Karak (Jordan); Mousa, Marwan S., E-mail: mmousa@mutah.edu.jo [Department of Physics, Mu' tah University, Al-Karak (Jordan); Fischer, Andreas, E-mail: andreas.fischer@physik.tu-chemnitz.de [Institut für Physik, Technische Universität Chemnitz, Chemnitz (Germany)

2013-09-15

Tungsten based microemitter tips have been prepared both clean and coated with dielectric materials. For clean tungsten tips, apex radii have been varied ranging from 25 to 500 nm. These tips were manufactured by electrochemical etching a 0.1 mm diameter high purity (99.95%) tungsten wire at the meniscus of two molar NaOH solution. Composite micro-emitters considered here are consisting of a tungsten core coated with different dielectric materials—such as magnesium oxide (MgO), sodium hydroxide (NaOH), tetracyanoethylene (TCNE), and zinc oxide (ZnO). It is worthwhile noting here, that the rather unconventional NaOH coating has shown several interesting properties. Various properties of these emitters were measured including current–voltage (IV) characteristics and the physical shape of the tips. A conventional field emission microscope (FEM) with a tip (cathode)–screen (anode) separation standardized at 10 mm was used to electrically characterize the electron emitters. The system was evacuated down to a base pressure of ∼10{sup −8}mbar when baked at up to ∼180°C overnight. This allowed measurements of typical field electron emission (FE) characteristics, namely the IV characteristics and the emission images on a conductive phosphorus screen (the anode). Mechanical characterization has been performed through a FEI scanning electron microscope (SEM). Within this work, the mentioned experimental results are connected to the theory for analyzing Fowler–Nordheim (FN) plots. We compared and evaluated the data extracted from clean tungsten tips of different radii and determined deviations between the results of different extraction methods applied. In particular, we derived the apex radii of several clean and coated tungsten tips by both SEM imaging and analyzing FN plots. The aim of this analysis is to support the ongoing discussion on recently developed improvements of the theory for analyzing FN plots related to metal field electron emitters, which in

Information extraction from FN plots of tungsten microemitters

International Nuclear Information System (INIS)

Mussa, Khalil O.; Mousa, Marwan S.; Fischer, Andreas

2013-01-01

Tungsten based microemitter tips have been prepared both clean and coated with dielectric materials. For clean tungsten tips, apex radii have been varied ranging from 25 to 500 nm. These tips were manufactured by electrochemical etching a 0.1 mm diameter high purity (99.95%) tungsten wire at the meniscus of two molar NaOH solution. Composite micro-emitters considered here are consisting of a tungsten core coated with different dielectric materials—such as magnesium oxide (MgO), sodium hydroxide (NaOH), tetracyanoethylene (TCNE), and zinc oxide (ZnO). It is worthwhile noting here, that the rather unconventional NaOH coating has shown several interesting properties. Various properties of these emitters were measured including current–voltage (IV) characteristics and the physical shape of the tips. A conventional field emission microscope (FEM) with a tip (cathode)–screen (anode) separation standardized at 10 mm was used to electrically characterize the electron emitters. The system was evacuated down to a base pressure of ∼10 −8 mbar when baked at up to ∼180°C overnight. This allowed measurements of typical field electron emission (FE) characteristics, namely the IV characteristics and the emission images on a conductive phosphorus screen (the anode). Mechanical characterization has been performed through a FEI scanning electron microscope (SEM). Within this work, the mentioned experimental results are connected to the theory for analyzing Fowler–Nordheim (FN) plots. We compared and evaluated the data extracted from clean tungsten tips of different radii and determined deviations between the results of different extraction methods applied. In particular, we derived the apex radii of several clean and coated tungsten tips by both SEM imaging and analyzing FN plots. The aim of this analysis is to support the ongoing discussion on recently developed improvements of the theory for analyzing FN plots related to metal field electron emitters, which in

Polar plot representation of time-resolved fluorescence.

Science.gov (United States)

Eichorst, John Paul; Wen Teng, Kai; Clegg, Robert M

2014-01-01

Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

An ecoinformatics application for forest dynamics plot data management and sharing

Science.gov (United States)

Chau-Chin Lin; Abd Rahman Kassim; Kristin Vanderbilt; Donald Henshaw; Eda C. Melendez-Colom; John H. Porter; Kaoru Niiyama; Tsutomu Yagihashi; Sek Aun Tan; Sheng-Shan Lu; Chi-Wen Hsiao; Li-Wan Chang; Meei-Ru. Jeng

2011-01-01

Several forest dynamics plot research projects in the East-Asia Pacific region of the International Long-Term Ecological Research network actively collect long-term data, and some of these large plots are members of the Center for Tropical Forest Science network. The wealth of forest plot data presents challenges in information management to researchers. In order to...

Effects of plot size on forest-type algorithm accuracy

Science.gov (United States)

James A. Westfall

2009-01-01

The Forest Inventory and Analysis (FIA) program utilizes an algorithm to consistently determine the forest type for forested conditions on sample plots. Forest type is determined from tree size and species information. Thus, the accuracy of results is often dependent on the number of trees present, which is highly correlated with plot area. This research examines the...

Early thinning experiments established by the Fort Valley Experimental Forest

Science.gov (United States)

Benjamin P. De Blois; Alex. J. Finkral; Andrew J. Sanchez Meador; Margaret M. Moore

2008-01-01

Between 1925 and 1936, the Fort Valley Experimental Forest (FVEF) scientists initiated a study to examine a series of forest thinning experiments in second growth ponderosa pine stands in Arizona and New Mexico. These early thinning plots furnished much of the early background for the development of methods used in forest management in the Southwest. The plots ranged...

Considerations in Forest Growth Estimation Between Two Measurements of Mapped Forest Inventory Plots

Science.gov (United States)

Michael T. Thompson

2006-01-01

Several aspects of the enhanced Forest Inventory and Analysis (FIA) program?s national plot design complicate change estimation. The design incorporates up to three separate plot sizes (microplot, subplot, and macroplot) to sample trees of different sizes. Because multiple plot sizes are involved, change estimators designed for polyareal plot sampling, such as those...

Fitting diameter distribution models to data from forest inventories with concentric plot design

Energy Technology Data Exchange (ETDEWEB)

Nanos, N.; Sjöstedt de Luna, S.

2017-11-01

Aim: Several national forest inventories use a complex plot design based on multiple concentric subplots where smaller diameter trees are inventoried when lying in the smaller-radius subplots and ignored otherwise. Data from these plots are truncated with threshold (truncation) diameters varying according to the distance from the plot centre. In this paper we designed a maximum likelihood method to fit the Weibull diameter distribution to data from concentric plots. Material and methods: Our method (M1) was based on multiple truncated probability density functions to build the likelihood. In addition, we used an alternative method (M2) presented recently. We used methods M1 and M2 as well as two other reference methods to estimate the Weibull parameters in 40000 simulated plots. The spatial tree pattern of the simulated plots was generated using four models of spatial point patterns. Two error indices were used to assess the relative performance of M1 and M2 in estimating relevant stand-level variables. In addition, we estimated the Quadratic Mean plot Diameter (QMD) using Expansion Factors (EFs). Main results: Methods M1 and M2 produced comparable estimation errors in random and cluster tree spatial patterns. Method M2 produced biased parameter estimates in plots with inhomogeneous Poisson patterns. Estimation of QMD using EFs produced biased results in plots within inhomogeneous intensity Poisson patterns. Research highlights:We designed a new method to fit the Weibull distribution to forest inventory data from concentric plots that achieves high accuracy and precision in parameter estimates regardless of the within-plot spatial tree pattern.

Cross-plotting of rock properties for fluid discrimination using well ...

African Journals Online (AJOL)

properties and their attributes (combination of rock properties) cross-plots have been attempted using well data from an offshore field of the Niger Delta as a case study. Numerous cross-plotting techniques of rock- properties/attributes derived from ...

Climatic warming strengthens a positive feedback between alpine shrubs and fire.

Science.gov (United States)

Camac, James S; Williams, Richard J; Wahren, Carl-Henrik; Hoffmann, Ary A; Vesk, Peter A

2017-08-01

Climate change is expected to increase fire activity and woody plant encroachment in arctic and alpine landscapes. However, the extent to which these increases interact to affect the structure, function and composition of alpine ecosystems is largely unknown. Here we use field surveys and experimental manipulations to examine how warming and fire affect recruitment, seedling growth and seedling survival in four dominant Australian alpine shrubs. We found that fire increased establishment of shrub seedlings by as much as 33-fold. Experimental warming also doubled growth rates of tall shrub seedlings and could potentially increase their survival. By contrast, warming had no effect on shrub recruitment, postfire tussock regeneration, or how tussock grass affected shrub seedling growth and survival. These findings indicate that warming, coupled with more frequent or severe fires, will likely result in an increase in the cover and abundance of evergreen shrubs. Given that shrubs are one of the most flammable components in alpine and tundra environments, warming is likely to strengthen an existing feedback between woody species abundance and fire in these ecosystems. © 2017 John Wiley & Sons Ltd.

Plano amostral em parcelas de milho para avaliação de atributos de espigas Sampling plan in corn plots to evaluate ear characteristics

Directory of Open Access Journals (Sweden)

Thomas Newton Martin

2005-12-01

Full Text Available Em experimentos agrícolas, a amostragem é importante para reduzir os custos e a mão-de-obra, embora devam possuir características que confiram precisão experimental adequada. O objetivo do trabalho foi determinar uma metodologia para se amostrar parcelas e sub-parcelas experimentais de milho, quando o objetivo é avaliar atributos morfológicos e de rendimento avaliados nas espigas. O experimento foi realizado, no Departamento de Fitotecnia da Universidade Federal de Santa Maria, com quatro bases genéticas de milho (híbrido simples - DAS 9560; híbrido duplo - AG 303; híbrido triplo - AG 6018; variedade cultivada - BR 202. O delineamento usado foi blocos completos casualizados com quatro repetições. A parcela foi constituída de 96 sub-parcelas de um metro. Em cada parcela, amostraram-se as espigas de cinco sub-parcelas. Foram avaliados o comprimento, o diâmetro, o rendimento de grãos e a massa de cem grãos de cada espiga. Concluiu-se que o tamanho da amostra nas parcelas de milho está relacionado ao atributo a ser avaliado nas espigas. Existem interferências genéticas e ambientais sobre a magnitude da estimativa do tamanho da amostra de espigas de milho. Pode-se amostrar 24 espigas por parcela, em seis repetições por genótipo, para avaliar os atributos comprimento e largura de espigas, rendimento de grãos e massa de cem grãos, para obter uma semi-amplitude do intervalo de confiança abaixo de 10% da média.In agricultural experiments good sampling techniques are important to reduce costs and labor, and guarantee adequate experimental precision. The objective of this research was to study a sampling methodology of experimental plots to evaluate morphologic characteristic and corn yield in maize spikes. Single (DAS 9560, double (AG 6018 and triple (AG 303 crosses corn hybrids and an open pollinated variety (BR 202 were ev aluated. The experiment design was a randomized complete block with four replications and was conducted

The Effect of Plot Size on Some Pratylenchus Penetrans ...

African Journals Online (AJOL)

Pratylenchus penetrans counts obtained from a rose field, sampled sequentially by decreasing the plot sizes were computed to obtain the respective sample means, variance and k-value of the negative binomial distribution. Plots 21 m x 80 m, 3.6 m x 3.6 m and 0.6 m x 0.6 m were sampled for the nematode. It is reported ...

[Heart rate variability study based on a novel RdR RR Intervals Scatter Plot].

Science.gov (United States)

Lu, Hongwei; Lu, Xiuyun; Wang, Chunfang; Hua, Youyuan; Tian, Jiajia; Liu, Shihai

2014-08-01

On the basis of Poincare scatter plot and first order difference scatter plot, a novel heart rate variability (HRV) analysis method based on scatter plots of RR intervals and first order difference of RR intervals (namely, RdR) was proposed. The abscissa of the RdR scatter plot, the x-axis, is RR intervals and the ordinate, y-axis, is the difference between successive RR intervals. The RdR scatter plot includes the information of RR intervals and the difference between successive RR intervals, which captures more HRV information. By RdR scatter plot analysis of some records of MIT-BIH arrhythmias database, we found that the scatter plot of uncoupled premature ventricular contraction (PVC), coupled ventricular bigeminy and ventricular trigeminy PVC had specific graphic characteristics. The RdR scatter plot method has higher detecting performance than the Poincare scatter plot method, and simpler and more intuitive than the first order difference method.

Measurements of the effectiveness of conservation agriculture at the field scale using radioisotopic techniques and runoff plots

Science.gov (United States)

Mabit, L.; Klik, A.; Toloza, A.; Benmansour, M.; Geisler, A.; Gerstmann, U. C.

2009-04-01

Growing evidence of the cost of soil erosion on agricultural land and off site impact of associated processes has emphasized the needs for quantitative assessment of erosion rates to develop and assess erosion control technology and to allocate conservation resources and development of conservation regulation, policies and programmes. Our main study goal was to assess the magnitude of deposition rates using Fallout Radionuclides ‘FRNs' (137-Cs and 210-Pb) and the mid-term (13 years) erosion rates using conventional runoff plot measurements in a small agricultural watershed under conventional and conservation tillage practices. The tillage treatments were conventional tillage system (CT), mechanical plough to 30 cm depth (the most common tillage system within the watershed); conservation tillage (CS) with cover crops during winter; and direct seeding (DS) no tillage with cover crops during winter. The experimental design - located in Mistelbach watershed 60 km north of Vienna/Austria - consists of one 3-metre-wide and 15-metre-long runoff plot (silt loam - slope of 14%) for each tillage system (CT, CS and DS) with the plots placed in the upper part of an agricultural field. 76 soil samples were collected to evaluate the initial fallout of 137-Cs and 210-Pb in a small forested area close to the experimental field, along a systematic multi-grid design,. In the sedimentation area of the watershed and down slope the agricultural field, 2 additional soil profiles were collected to 1 m depth. All soil samples were air dried, sieved to 2mm and analysed for their 137-Cs and 210-Pb contents using gamma detector. The main results and conclusion can be summarised as following: i) The initial 137-Cs fallout as measured in the 76 forested soil samples ranged from 1123 to 3354 Bq/m2 for an average of 1954 Bq/m2 with a coefficient of variation of 20.4 %. ii) Long-term erosion measurements (1994-2006) from runoff plots located in the upper part of the agricultural field just up

Flyby Error Analysis Based on Contour Plots for the Cassini Tour

Science.gov (United States)

Stumpf, P. W.; Gist, E. M.; Goodson, T. D.; Hahn, Y.; Wagner, S. V.; Williams, P. N.

2008-01-01

The maneuver cancellation analysis consists of cost contour plots employed by the Cassini maneuver team. The plots are two-dimensional linear representations of a larger six-dimensional solution to a multi-maneuver, multi-encounter mission at Saturn. By using contours plotted with the dot product of vectors B and R and the dot product of vectors B and T components, it is possible to view the effects delta V on for various encounter positions in the B-plane. The plot is used in operations to help determine if the Approach Maneuver (ensuing encounter minus three days) and/or the Cleanup Maneuver (ensuing encounter plus three days) can be cancelled and also is a linear check of an integrated solution.

Contemplation on Plot and Personification in Tehran Makhuf

OpenAIRE

Mohammad Pashaei; Mirjalil Akrami; Mirjalil Akrami

2013-01-01

 Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of âTehran-e- Makhufâ and respond to the questions on the method employed for plot and personification and analyze it from pl...

Complexity Plots

KAUST Repository

Thiyagalingam, Jeyarajan

2013-06-01

In this paper, we present a novel visualization technique for assisting the observation and analysis of algorithmic complexity. In comparison with conventional line graphs, this new technique is not sensitive to the units of measurement, allowing multivariate data series of different physical qualities (e.g., time, space and energy) to be juxtaposed together conveniently and consistently. It supports multivariate visualization as well as uncertainty visualization. It enables users to focus on algorithm categorization by complexity classes, while reducing visual impact caused by constants and algorithmic components that are insignificant to complexity analysis. It provides an effective means for observing the algorithmic complexity of programs with a mixture of algorithms and black-box software through visualization. Through two case studies, we demonstrate the effectiveness of complexity plots in complexity analysis in research, education and application. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and Blackwell Publishing Ltd.

[Effect of comprehensive control and prevention for chronic disease in demonstration plot of Chongqing].

Science.gov (United States)

Qi, Li; Ding, Xian-bin; Mao, De-qiang; Feng, Lian-gui; Wang, Yu-lin; Jiao, Yan; Zhang, Chun-hua; Lü, Xiao-yan; Li, Hong; Xia, Yi-yin

2013-03-01

To evaluate the effect of comprehensive control and prevention for chronic diseases in demonstration plot of Chongqing. Residents were enrolled through multi-stage stratified random sampling method from 17 districts or counties which had successfully established demonstration plots and 21 districts or counties which had not established demonstration plots (non-demonstration plot for short) yet on May, 2012. Questionnaire was designed to survey awareness of health knowledge, health behaviors and utilization of health supportive tools. The results were analyzed by SPSS 15.0 software. We investigated 15 108 residents, 6156 of which were in demonstration plot and others (8951) were not. The findings revealed the percentage of the people who were aware the national action of health lifestyle in demonstration plot and in non-demonstration plot were 44.4% (2734/6157) and 40.2% (3598/8951), respectively, and the awareness of the hypertension risk of too much sodium were 72.4% (4458/6156) and 67.5% (6042/8951), respectively, and the awareness of the cardinal vascular disease (CVD) risk of obesity and overweight were 77.2% (4753/6157) and 69.6% (6230/8951), respectively. About the residents' health behaviors in demonstration plot and in non-demonstration plot, the utilization rates of salt restriction scoop or pot were 23.5% (1447/6157) and 17.9% (1602/8951), and the utilization rates of oil restriction pot were 16.7% (1028/6157) and 11.8% (1064/8951), respectively. Totally, 33 of the 37 indexes were shown higher in demonstration plot than that in non-demonstration plot (P plot was more effective, and the remarkable improvement of health knowledge and behaviors level had been achieved in demonstration plot.

Fitting Data to Model: Structural Equation Modeling Diagnosis Using Two Scatter Plots

Science.gov (United States)

Yuan, Ke-Hai; Hayashi, Kentaro

2010-01-01

This article introduces two simple scatter plots for model diagnosis in structural equation modeling. One plot contrasts a residual-based M-distance of the structural model with the M-distance for the factor score. It contains information on outliers, good leverage observations, bad leverage observations, and normal cases. The other plot contrasts…

Zipper plot: visualizing transcriptional activity of genomic regions.

Science.gov (United States)

Avila Cobos, Francisco; Anckaert, Jasper; Volders, Pieter-Jan; Everaert, Celine; Rombaut, Dries; Vandesompele, Jo; De Preter, Katleen; Mestdagh, Pieter

2017-05-02

Reconstructing transcript models from RNA-sequencing (RNA-seq) data and establishing these as independent transcriptional units can be a challenging task. Current state-of-the-art tools for long non-coding RNA (lncRNA) annotation are mainly based on evolutionary constraints, which may result in false negatives due to the overall limited conservation of lncRNAs. To tackle this problem we have developed the Zipper plot, a novel visualization and analysis method that enables users to simultaneously interrogate thousands of human putative transcription start sites (TSSs) in relation to various features that are indicative for transcriptional activity. These include publicly available CAGE-sequencing, ChIP-sequencing and DNase-sequencing datasets. Our method only requires three tab-separated fields (chromosome, genomic coordinate of the TSS and strand) as input and generates a report that includes a detailed summary table, a Zipper plot and several statistics derived from this plot. Using the Zipper plot, we found evidence of transcription for a set of well-characterized lncRNAs and observed that fewer mono-exonic lncRNAs have CAGE peaks overlapping with their TSSs compared to multi-exonic lncRNAs. Using publicly available RNA-seq data, we found more than one hundred cases where junction reads connected protein-coding gene exons with a downstream mono-exonic lncRNA, revealing the need for a careful evaluation of lncRNA 5'-boundaries. Our method is implemented using the statistical programming language R and is freely available as a webtool.

Potato production on private plots contaminated by radionuclides

International Nuclear Information System (INIS)

Bogdevitch, I.; Tarasiuk, S.

2004-01-01

Potatoes is one of the basis food products of man diet, especially in country area. Recent research has shown that 137 Cs content in potato tubers does not exceed the permissible level at the potato growing on radioactive contaminated land in Belarus. However up to 240-300 kg of potatoes is consumed per man during year and potato yield determines significant share of the internal dose of radiation. Moreover, extra potato yield sold on market is forming the essential part of the rural family budget. Therefore the reducing of 137 Cs content in potatoes and increasing of potato yield could be allowed to improve of quality life of rural inhabitants on contaminated areas. The application of protection measures on private plots are restricted by lack of the knowledge and financial deficit. The involvement of rural inhabitants in processes of self-rehabilitation and self-development could be a way to improve the quality life on radioactive contaminated territory There is strong motivation for inhabitants to increase the yield and to reduce the radionuclide concentration in potatoes. How to develop the conditions for the sustainable potato production by private producers on affected land? There are several factors to consider. Firstly, the rural inhabitants should be actively involved as initiators to improve their quality life. Secondly, the potato technology should be adopted to the local territory and tested by producers on radiological and economic efficiency. Thirdly, the common village initiatives should be developed for supplying by new varieties of seeds and fertilizers, selling of yield, consulting, crediting etc. The step-by-step solution of described strategy could allow improving and stabilizing the potato production by rural community. The training of rural people as an initial step was realized to transfer to the inhabitants the practical skills that can be used in their day-to-day life within framework of 'ETHOS-II' project. The experimental potato

On the Nature of Earth-Mars Porkchop Plots

Science.gov (United States)

Woolley, Ryan C.; Whetsel, Charles W.

2013-01-01

Porkchop plots are a quick and convenient tool to help mission designers plan ballistic trajectories between two bodies. Parameter contours give rise to the familiar 'porkchop' shape. Each synodic period the pattern repeats, but not exactly, primarily due to differences in inclination and non-zero eccentricity. In this paper we examine the morphological features of Earth-to-Mars porkchop plots and the orbital characteristics that create them. These results are compared to idealistic and optimized transfers. Conclusions are drawn about 'good' opportunities versus 'bad' opportunities for different mission applications.

[Effects of sampling plot number on tree species distribution prediction under climate change].

Science.gov (United States)

Liang, Yu; He, Hong-Shi; Wu, Zhi-Wei; Li, Xiao-Na; Luo, Xu

2013-05-01

Based on the neutral landscapes under different degrees of landscape fragmentation, this paper studied the effects of sampling plot number on the prediction of tree species distribution at landscape scale under climate change. The tree species distribution was predicted by the coupled modeling approach which linked an ecosystem process model with a forest landscape model, and three contingent scenarios and one reference scenario of sampling plot numbers were assumed. The differences between the three scenarios and the reference scenario under different degrees of landscape fragmentation were tested. The results indicated that the effects of sampling plot number on the prediction of tree species distribution depended on the tree species life history attributes. For the generalist species, the prediction of their distribution at landscape scale needed more plots. Except for the extreme specialist, landscape fragmentation degree also affected the effects of sampling plot number on the prediction. With the increase of simulation period, the effects of sampling plot number on the prediction of tree species distribution at landscape scale could be changed. For generalist species, more plots are needed for the long-term simulation.

Activities: Plotting and Predicting from Pairs.

Science.gov (United States)

Shulte, Albert P.; Swift, Jim

1984-01-01

This teacher's guide provides objectives, procedures, and list of materials needed for activities which center around the use of a scatter plot to examine relationships shown by bivariate data. The activities are suitable for grades 7 to 12. Four student worksheets are included. (JN)

A Guided Inquiry on Hubble Plots and the Big Bang

Science.gov (United States)

Forringer, Ted

2014-01-01

In our science for non-science majors course "21st Century Physics," we investigate modern "Hubble plots" (plots of velocity versus distance for deep space objects) in order to discuss the Big Bang, dark matter, and dark energy. There are two potential challenges that our students face when encountering these topics for the…

A Bayesian CUSUM plot: Diagnosing quality of treatment.

Science.gov (United States)

Rosthøj, Steen; Jacobsen, Rikke-Line

2017-12-01

To present a CUSUM plot based on Bayesian diagnostic reasoning displaying evidence in favour of "healthy" rather than "sick" quality of treatment (QOT), and to demonstrate a technique using Kaplan-Meier survival curves permitting application to case series with ongoing follow-up. For a case series with known final outcomes: Consider each case a diagnostic test of good versus poor QOT (expected vs. increased failure rates), determine the likelihood ratio (LR) of the observed outcome, convert LR to weight taking log to base 2, and add up weights sequentially in a plot showing how many times odds in favour of good QOT have been doubled. For a series with observed survival times and an expected survival curve: Divide the curve into time intervals, determine "healthy" and specify "sick" risks of failure in each interval, construct a "sick" survival curve, determine the LR of survival or failure at the given observation times, convert to weights, and add up. The Bayesian plot was applied retrospectively to 39 children with acute lymphoblastic leukaemia with completed follow-up, using Nordic collaborative results as reference, showing equal odds between good and poor QOT. In the ongoing treatment trial, with 22 of 37 children still at risk for event, QOT has been monitored with average survival curves as reference, odds so far favoring good QOT 2:1. QOT in small patient series can be assessed with a Bayesian CUSUM plot, retrospectively when all treatment outcomes are known, but also in ongoing series with unfinished follow-up. © 2017 John Wiley & Sons, Ltd.

Plot - level stem volume estimation and tree species discrimination with CASI remote sensing

Energy Technology Data Exchange (ETDEWEB)

Holmgren, Johan; Wallerman, J.; Olsson, Haakan

1999-10-01

Spectral data from the Compact Airborne Spectrographic Imager (CASI), with four bands (460-495 nm, 550-580 nm, 660-682 nm, 740-762 nm) acquired from a forest test area (Lat. 60 deg 00` N, Long. 17 deg 18` E), the Kaettboele estate near Uppsala, was analysed together with forest data from a number of field plots. Data from two flight lines, one towards and the other perpendicular to the sun was used. Information about stem volume and species composition from plots with 10-m radius, 138 in the first and 120 in the second flight line, was available. There was a positive correlation (R{sup 2} 0.51-0.53) between stem volume and the inverted radiance for all four bands on plot level. The strong correlation between stem volume and a shadow density measure indicates that shadows explain much of the correlation. For the flight line perpendicular to the sun, the correlation was stronger for the side towards the sun compared to the side away from the sun. In the first flight line, plots with a stem volume > 120 m{sup 3}ha{sup -1} were classified according to the tree species composition (pine, spruce, deciduous trees). Groups were formed based on the classification, and the hypothesis that there was no difference in spectral radiance between these groups was tested. It was possible to separate pine dominated plots from spruce dominated plots. It was also possible to separate spruce dominated plots from spruce dominated plots with a minor portion of pine, but not pine dominated plots from pine dominated plots with a minor portion of spruce. The near-infrared band was the best band for discrimination of tree species 16 refs, 2 figs, 8 tabs

Complex Correlation Measure: a novel descriptor for Poincaré plot

Directory of Open Access Journals (Sweden)

Gubbi Jayavardhana

2009-08-01

Full Text Available Abstract Background Poincaré plot is one of the important techniques used for visually representing the heart rate variability. It is valuable due to its ability to display nonlinear aspects of the data sequence. However, the problem lies in capturing temporal information of the plot quantitatively. The standard descriptors used in quantifying the Poincaré plot (SD1, SD2 measure the gross variability of the time series data. Determination of advanced methods for capturing temporal properties pose a significant challenge. In this paper, we propose a novel descriptor "Complex Correlation Measure (CCM" to quantify the temporal aspect of the Poincaré plot. In contrast to SD1 and SD2, the CCM incorporates point-to-point variation of the signal. Methods First, we have derived expressions for CCM. Then the sensitivity of descriptors has been shown by measuring all descriptors before and after surrogation of the signal. For each case study, lag-1 Poincaré plots were constructed for three groups of subjects (Arrhythmia, Congestive Heart Failure (CHF and those with Normal Sinus Rhythm (NSR, and the new measure CCM was computed along with SD1 and SD2. ANOVA analysis distribution was used to define the level of significance of mean and variance of SD1, SD2 and CCM for different groups of subjects. Results CCM is defined based on the autocorrelation at different lags of the time series, hence giving an in depth measurement of the correlation structure of the Poincaré plot. A surrogate analysis was performed, and the sensitivity of the proposed descriptor was found to be higher as compared to the standard descriptors. Two case studies were conducted for recognizing arrhythmia and congestive heart failure (CHF subjects from those with NSR, using the Physionet database and demonstrated the usefulness of the proposed descriptors in biomedical applications. CCM was found to be a more significant (p = 6.28E-18 parameter than SD1 and SD2 in discriminating

Investigating and Modeling Ecosystem Response to an Experimental and a Natural Ice Storm

Science.gov (United States)

Fakhraei, H.; Driscoll, C. T.; Rustad, L.; Campbell, J. L.; Groffman, P.; Fahey, T.; Likens, G.; Swaminathan, R.

2017-12-01

Our understanding of ecosystem response to the extreme events is generally limited to rare observations from the natural historical events. However, investigating extreme events under controlled conditions can improve our understanding of these natural phenomena. A novel field experiment was conducted in a northern hardwood forest at the Hubbard Brook Experimental Forest in New Hampshire in the northeastern United States to quantify the influence of ice storms on the ecological processes. During subfreezing conditions in the winters of 2016 and 2017, water from a nearby stream was pumped and sprayed on the canopy of eight experimental plots to accrete ice to a targeted thickness on the canopy. The experiment was conducted at three levels of icing thickness (0.25, 0.5, 0.75 in.) in 2016 comparable to the naturally occurring 1998 ice storm and a second 0.5 in. treatment 2017 which were compared with reference plots. The most notable response of the icing treatments was a marked increase in fine and course litter fall which increased exponentially with increases in the icing thickness. Post-treatment openings in the canopy caused short-term increases in soil temperature in the ice-treatment plots compared to the reference plots. No response from the ice storm treatments were detected for soil moisture, net N mineralization, net nitrification, or denitrification after both natural and experimental ice storm. In contrast to the marked increase in the stream water nitrate after the natural occurring 1998 ice storm, we have not observed any significant change in soil solution N concentrations in the experimental ice storm treatments. Inconsistency in the response between the natural and experimental ice storm is likely due to differences in geophysical characteristics of the study sites including slope and lateral uptake of nutrient by the trees outside the experimental plots. In order to evaluate the long-term impacts of ice storms on northern hardwood forests, we used

In-situ polymerization PLOT columns I: divinylbenzene

Science.gov (United States)

Shen, T. C.

1992-01-01

A novel method for preparation of porous-layer open-tubular (PLOT) columns is described. The method involves a simple and reproducible, straight-forward in-situ polymerization of monomer directly on the metal tube.

Aquifer test interpretation using derivative analysis and diagnostic plots

Science.gov (United States)

Hernández-Espriú, Antonio; Real-Rangel, Roberto; Cortés-Salazar, Iván; Castro-Herrera, Israel; Luna-Izazaga, Gabriela; Sánchez-León, Emilio

2017-04-01

Pumping tests remain a method of choice to deduce fundamental aquifer properties and to assess well condition. In the oil and gas (O&G) industry, well testing has been the core technique in examining reservoir behavior over the last 50 years. The pressure derivative by Bourdet, it is perhaps, the most significant single development in the history of well test analysis. Recently, the so-called diagnostics plots (e.g. drawdown and drawdown derivative in a log-log plot) have been successfully tested in aquifers. However, this procedure is still underutilized by groundwater professionals. This research illustrates the applicability range, advantages and drawbacks (e.g. smoothing procedures) of diagnostic plots using field examples from a wide spectrum of tests (short/long tests, constant/variable flow rates, drawdown/buildup stages, pumping well/observation well) in dissimilar geological conditions. We analyze new and pre-existent aquifer tests in Mexico, USA, Canada, Germany, France and Saudi Arabia. In constant flow rate tests, our results show that derivative analysis is an easy, robust and powerful tool to assess near-borehole damage effects, formation heterogeneity, boundaries, flow regimes, infinite-acting radial stages, i.e., valid Theisian framework, and fracture-driven flow. In step tests, the effectiveness relies on high-frequency drawdown measurements. Moreover, we adapt O&G analytical solutions to cater for the conditions in groundwater systems. In this context, further parameters can be computed analytically from the plots, such as skin factor, head losses, wellbore storage, distance to the boundary, channel-aquifer and/or fracture zone width, among others. Therefore, diagnostic plots should be considered a mandatory tool for pumping tests analysis among hydrogeologists. This project has been supported by DGAPA (UNAM) under the research project PAPIIT IN-112815.

A narratological analysis of Mark 12:1-12: The plot of the Gospel of ...

African Journals Online (AJOL)

The purpose of this article is an attempt to read Mark 12: 1-12 in terms of the plot of the Gospel. Firstly a brief survey is given of the development of the term plot from Aristotle to the present, thereafter an own methodological point of departure concerning plot is formulated in order to study the plot of Mark. The conclusions ...

Recurrence plot analysis of DNA sequences

Energy Technology Data Exchange (ETDEWEB)

Wu Zuobing [State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080 (China)]. E-mail: wuzb@lnm.imech.ac.cn

2004-11-15

Recurrence plot technique of DNA sequences is established on metric representation and employed to analyze correlation structure of nucleotide strings. It is found that, in the transference of nucleotide strings, a human DNA fragment has a major correlation distance, but a yeast chromosome's correlation distance has a constant increasing.

Plot and Personification in “Tehran-e- Makhuf“

Directory of Open Access Journals (Sweden)

M. Pashaei

Full Text Available Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European account. In some cases, he approaches to story

Contemplation on Plot and Personification in Tehran Makhuf

Directory of Open Access Journals (Sweden)

Mirjalil Akrami

2013-11-01

Full Text Available Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.  The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.  Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European account. In some cases, he

Using 7Be to document soil erosion on the weed plots

International Nuclear Information System (INIS)

Zhang Bo; Zhang Fengbao; Yang Mingyi

2013-01-01

Be tracing technology was applied to document soil erosion on the bare plot and weed plot, and compae soil erosion rate with the calculated rate. Results indicated that vegetation cover had obvious effect on the estimate of soil erosion rate on the weed plot using 7 Be measurement. Therefore, a factor of vegetation had been introduced into the Walling's model of converting 7 Be activity to soil erosion rate for estimating soil erosion rate on the weed slope surface. It was found that the soil erosion rates calculated by modified model were well close to the measured values on the weed plot, which illustrated that the modified model could be well used to estimate the rates of soil loss on the weed slope surface. These findings provide effective means for further study on the relationship between vegetation cover and soil erosion. (authors)

Sacrifice as a plot device

Directory of Open Access Journals (Sweden)

Ashikhmanova Natalya Alexandrovna

2015-12-01

Full Text Available It is considered the plot device “sacrifice” as a meaningful component of the narrative. It sets a minimum of substantive meaning of this formation (the idea of getting something over the loss of something. The main types of sacrifice: sacrifice and self-sacrifice. Sacrifice means bringing something to sacrifice for the sake of an idea or someone else and implies a greater degree of external attributes. Self-sacrifice brings a loss of the intrinsic value of the character. Sacrifice as the action takes place consciously and, as a rule, does not require compensation in return. Victims sacrifice not only material things but spiritual as well. Their actions are certainly driven by the idea, which is of value. In the case of self-sacrifice victim is itself a victim. Present for sacrifice plays a certain role in the development of some of the stories of fabulous narratives. Search of the present can be a starting point in the development of fantastic narrative plot. As a sacrifice the present can be considered in three forms: in the form of material expression, in the form of immaterial substance, as well as a way to transfer the character into magical power through knowledge empowerment of its formulaic spells.

Representing Uncertainty on Model Analysis Plots

Science.gov (United States)

Smith, Trevor I.

2016-01-01

Model analysis provides a mechanism for representing student learning as measured by standard multiple-choice surveys. The model plot contains information regarding both how likely students in a particular class are to choose the correct answer and how likely they are to choose an answer consistent with a well-documented conceptual model.…

Radiocarbon enrichment of soil organic matter fractions in New Zealand soils

International Nuclear Information System (INIS)

Goh, K.M.; Stout, J.D.; Rafter, T.A.

1977-01-01

Soil organic matter was extracted using the classical procedure and fractionated into humin (nonextractable), humic acid, and fulvic acid. The masses of total organic carbon in the whole soil samples and in the fractions, together with their 14 C content and 13 C/ 12 C ratios, were also determined. The following New Zealand soils were studied: a Fluvaquent, with experimental pasture plots, formed from deeply mixing subsoils of low organic carbon content; a Typic Fragiaqualf and a Typic Dystrochrept with moderately productive pastures; and an Umbric Vitrandept at two sites under native tussock and under introduced grasses of low productivity. The degree of radiocarbon enrichment of the different fractions in both topsoil and subsoil samples was examined in relation to differences in soil type, soil biological activity, and vegetation history. There was variation in the distribution and enrichment of the organic matter fractions both within the same soil type and between soil types, as well as between the topsoil and subsoil of the same soil. Differences appeared to be primarily a function of the stage of decomposition and translocation of the fractions through the soil rather than due to vegetation differences

Comparison of Three Plot Selection Methods for Estimating Change in Temporally Variable, Spatially Clustered Populations.

Energy Technology Data Exchange (ETDEWEB)

Thompson, William L. [Bonneville Power Administration, Portland, OR (US). Environment, Fish and Wildlife

2001-07-01

Monitoring population numbers is important for assessing trends and meeting various legislative mandates. However, sampling across time introduces a temporal aspect to survey design in addition to the spatial one. For instance, a sample that is initially representative may lose this attribute if there is a shift in numbers and/or spatial distribution in the underlying population that is not reflected in later sampled plots. Plot selection methods that account for this temporal variability will produce the best trend estimates. Consequently, I used simulation to compare bias and relative precision of estimates of population change among stratified and unstratified sampling designs based on permanent, temporary, and partial replacement plots under varying levels of spatial clustering, density, and temporal shifting of populations. Permanent plots produced more precise estimates of change than temporary plots across all factors. Further, permanent plots performed better than partial replacement plots except for high density (5 and 10 individuals per plot) and 25% - 50% shifts in the population. Stratified designs always produced less precise estimates of population change for all three plot selection methods, and often produced biased change estimates and greatly inflated variance estimates under sampling with partial replacement. Hence, stratification that remains fixed across time should be avoided when monitoring populations that are likely to exhibit large changes in numbers and/or spatial distribution during the study period. Key words: bias; change estimation; monitoring; permanent plots; relative precision; sampling with partial replacement; temporary plots.

Potato production on private plots contaminated by radionuclides

Energy Technology Data Exchange (ETDEWEB)

Bogdevitch, I.; Tarasiuk, S. [Belarusian Research Institute for Soil Science and Agrochemistry (BRISSA), Minsk (Belarus)

2004-07-01

experimental potato technology was developed and tested by stakeholders on 130 plots of Stolyn and Slavgorod districts during 2001-2003. The results have shown that potato yield in experiment was increased up to 35 t ha{sup -1} or in 1.6 times to the control with usual technology. The 1 euro invested to the potato experiment provided 1.5-2.0 euros of net return on the average. The careful testing of technology by some participants allowed to reduce the {sup 137}Cs and {sup 90}Sr accumulation in potatoes up to 50-70% and the nitrate concentration in 1.5-2.6 times to the control. Presumably the {sup 90}Sr concentration on plots contaminated by radionuclide and nitrate concentration in tuber should be permanently controlled. (author)

Contemplation on Plot and Personification in Tehran Makhuf

Directory of Open Access Journals (Sweden)

Mohammad Pashaei

2013-10-01

Full Text Available  Abstract Story is one of the important and influential literary genres that deserves to research on its structure and content .By study and analysis of a story, the reader could comprehend the textual messages and change his attitude toward life and different issues .After defining of the social novel, the author tries to analyze plot and personification in novel of “Tehran-e- Makhuf” and respond to the questions on the method employed for plot and personification and analyze it from plot and its components such as conflict, suspension and resolution and compare the differences and similarities between old tales and modern novels.  The plot of “Tehran-e- Makhuf” is not so complex due to its subject and content and natural order of events dominates on artificial discipline and it lacks open plot. Of main elements of plot, conflict is more outstanding here. This novel is full of emotional and moral conflicts and there is no similarity with historical novels that describe good and bad conflicts. Cause and effect relationship is main element of plot that shadows on the story events .In “Tehrna-e- Makhuf”, the author tries to violate the principles and cause to imbalance in natural events sequences with discomposing rational and experiential relationship and take action toward artificiality and unnatural suspension. In creating suspension by emphasis on incidences in some extremist cases, Kazemi tries to found the story based on the considerable sequence of events and this conduct reduces quality of the story significantly and leads to imbalance in rational and acceptable discipline.  Kazemi employs direct or reporting personification mostly. This novel lacks diversity in personage considerably .All characters speak in similar style and there is no particular speech style. The personification of Kazemi in “Tehran-e-Makhuf” is continuous and interdependent in style of old tales and novel in European

On-Line 1D and 2D PLOT/LC-ESI-MS Using 10 μm i.d. Poly(styrene–divinylbenzene) Porous Layer Open Tubular (PLOT) Columns For Ultrasensitive Proteomic Analysis

Science.gov (United States)

Luo, Quanzhou; Yue, Guihua; Valaskovic, Gary A; Gu, Ye; Wu, Shiaw-Lin; Karger, Barry L.

2008-01-01

Following on our recent work, on-line one dimensional (1D) and two dimensional (2D) PLOT/LC-ESI-MS platforms using 3.2 m × 10 μm i.d. poly(styrenedivinylbenzene) (PS-DVB) porous layer open tubular (PLOT) columns have been developed to provide robust, high performance and ultrasensitive proteomic analysis. Using a PicoClear tee, the dead volume connection between a 50 μm i.d. PS-DVB monolithic microSPE column and the PLOT column was minimized. The microSPE/PLOT column assembly provided a separation performance similar to that obtained with direct injection onto the PLOT column at a mobile phase flow rate of 20 nL/min. The trace analysis potential of the platform was evaluated using an in-gel tryptic digest sample of a gel fraction (15 to 40 kDa) of a cervical cancer (SiHa) cell line. As an example of the sensitivity of the system, ∼2.5 ng of protein in 2 μL solution, an amount corresponding to 20 SiHa cells, was subjected to on-line microSPE-PLOT/LC-ESIMS/MS analysis using a linear ion trap MS. 237 peptides associated with 163 unique proteins were identified from a single analysis when using stringent criteria associated with a false positive rate less than 1% . The number of identified peptides and proteins increased to 638 and 343, respectively, as the injection amount was raised to ∼45 ng of protein, an amount corresponding to 350 SiHa cells. In comparison, only 338 peptides and 231 unique proteins were identified (false positive rate again less than 1%) from 750 ng of protein from the identical gel fraction, an amount corresponding to 6000 SiHa cells, using a typical 15 cm × 75 μm i.d. packed capillary column. The greater sensitivity, higher recovery, and higher resolving power of the PLOT column resulted in the increased number of identifications from only ∼5% of the injected sample amount. The resolving power of the microSPE/PLOT assembly was further extended by 2D chromatography via combination of the high-efficiency reversed phase PLOT column

Application of time-domain reflectometry to monitoring conditions in crushed tuff test plots at Los Alamos, New Mexico: Interpretation and recommendations for landfill monitoring

International Nuclear Information System (INIS)

Filippone, C.L.; Schofield, T.G.

1994-08-01

Horizontal and vertical measurements of moisture content were obtained daily using time domain reflectometry (TDR) at four sites in two crushed tuff experimental plots over a period of 287 days. Moisture contents were also measured weekly at the same locations and at two additional locations in the plots using the neutron probe method. Results are assessed to determine the influence of waveguide length and waveguide orientation on TDR moisture content measurements, the degree of spatial variability in measured moisture content in this engineered porous material, and the ability of TDR to resolve vertical moisture content gradients. Recommendations are made for TDR instrumentation of mixed waste landfill monitoring systems

Exploration of the forbidden regions of the Ramachandran plot (ϕ-ψ) with QTAIM.

Science.gov (United States)

Momen, Roya; Azizi, Alireza; Wang, Lingling; Ping, Yang; Xu, Tianlv; Kirk, Steven R; Li, Wenxuan; Manzhos, Sergei; Jenkins, Samantha

2017-10-04

A new QTAIM interpretation of the Ramachandran plot is formulated from the most and least facile eigenvectors of the second-derivative matrix of the electron density with a set of 29 magainin-2 peptide conformers. The presence of QTAIM eigenvectors associated with the most and least preferred directions of electronic charge density explained the role of hydrogen bonding, HH contacts and the glycine amino acid monomer in peptide folding. The highest degree of occupation of the QTAIM interpreted Ramachandran plot was found for the glycine amino acid monomer compared with the remaining backbone peptide bonds. The mobility of the QTAIM eigenvectors of the glycine amino acid monomer was higher than for the other amino acids and was comparable to that of the hydrogen bonding, explaining the flexibility of the magainin-2 backbone. We experimented with a variety of hybrid QTAIM-Ramachandran plots to highlight and explain why the glycine amino acid monomer largely occupies the 'forbidden' region on the Ramachandran plot. In addition, the new hybrid QTAIM-Ramachandran plots contained recognizable regions that can be associated with concepts familiar from the conventional Ramachandran plot whilst retaining the character of the QTAIM most and least preferred regions.

Confidence limits for contribution plots in multivariate statistical process control using bootstrap estimates.

Science.gov (United States)

Babamoradi, Hamid; van den Berg, Frans; Rinnan, Åsmund

2016-02-18

In Multivariate Statistical Process Control, when a fault is expected or detected in the process, contribution plots are essential for operators and optimization engineers in identifying those process variables that were affected by or might be the cause of the fault. The traditional way of interpreting a contribution plot is to examine the largest contributing process variables as the most probable faulty ones. This might result in false readings purely due to the differences in natural variation, measurement uncertainties, etc. It is more reasonable to compare variable contributions for new process runs with historical results achieved under Normal Operating Conditions, where confidence limits for contribution plots estimated from training data are used to judge new production runs. Asymptotic methods cannot provide confidence limits for contribution plots, leaving re-sampling methods as the only option. We suggest bootstrap re-sampling to build confidence limits for all contribution plots in online PCA-based MSPC. The new strategy to estimate CLs is compared to the previously reported CLs for contribution plots. An industrial batch process dataset was used to illustrate the concepts. Copyright © 2016 Elsevier B.V. All rights reserved.

The value of building plots in Italy - pdf

Directory of Open Access Journals (Sweden)

Paolo Rosato

2014-12-01

Full Text Available This paper suggests some analysis on dynamics of building plots value in Italy. This is an important subject, since the study of changes in plots value in space and time enables the evaluation of urban rent, which is essential for a fair and effective planning. The analysis confirm past hypothesis which are well known to real estate market operators. The first resulting fact is that the changes in building plots value are concurrent to those in real estate value and the increase occurring in the last years is in relative terms higher than the past one. This seems to confirm that, during real estate market expansion, most of the increase of buildings’ value is attributable to the land rent. The second observation is about value dynamics over time: it has been observed that, during an expansion in demand, the value significantly increases in central areas, much more than in peripheral ones; this means that absolute rent arising from shortage in urban areas is higher than the differential rent created through urban expansion in peripheral areas. Finally, it was highlighted that the factors affecting the value in building areas play different roles, depending on their location relative to the urban centre, identifying differently structured market segments.

SPECT-series plot-programs for spectral data for the USC-3 computer system

International Nuclear Information System (INIS)

Kawarasaki, Yuuki

1976-01-01

The programs for spectral data plotting, SPECT- series, have been prepared for use in the USC-3 computer system. They are based on the Basic Plot-Subroutine Unit reported previously and used for plot-processing both γ-ray and TOF-spectra. Two programs can process continuously as many data as required, reading from a magnetic-tape file, being of the same format as that in the Magnetic-Tape Base System. Specification of the plot-processing is as follows: the programs can plot (1) any number of data as required on a sheet, (2) in either linear or logarithmic Y-axis scaling, (3) in the arbitrary channel region, and (4) with variable scale-factor. How to program is described in detail. Usage of the representative programs with example outputs is explained. Problems in the improvement of processing speed and utilization efficiency are also discussed. (auth.)

The impact of tropospheric ozone pollution on trial plot winter wheat yields in Great Britain - an econometric approach.

Science.gov (United States)

Kaliakatsou, Evridiki; Bell, J Nigel B; Thirtle, Colin; Rose, Daniel; Power, Sally A

2010-05-01

Numerous experiments have demonstrated reductions in the yields of cereal crops due to tropospheric O(3), with losses of up to 25%. However, the only British econometric study on O(3) impacts on winter wheat yields, found that a 10% increase in AOT40 would decrease yields by only 0.23%. An attempt is made here to reconcile these observations by developing AOT40 maps for Great Britain and matching levels with a large number of standardised trial plot wheat yields from many sites over a 13-year period. Panel estimates (repeated measures on the same plots with time) show a 0.54% decrease in yields and it is hypothesised that plant breeders may have inadvertently selected for O(3) tolerance in wheat. Some support for this is provided by fumigations of cultivars of differing introduction dates. A case is made for the use of econometric as well as experimental studies in prediction of air pollution induced crop loss. Copyright 2009 Elsevier Ltd. All rights reserved.

Combining FIA plot data with topographic variables: Are precise locations needed?

Science.gov (United States)

Stephen P. Prisley; Huei-Jin Wang; Philip J Radtke; John Coulston

2009-01-01

Plot data from the USFS FIA program could be combined with terrain variables to attempt to explain how terrain characteristics influence forest growth, species composition, productivity, fire behavior, wildlife habitat, and other phenomena. While some types of analyses using FIA data have been shown to be insensitive to precision of plot locations, it has been...

shinyCircos: an R/Shiny application for interactive creation of Circos plot.

Science.gov (United States)

Yu, Yiming; Ouyang, Yidan; Yao, Wen

2018-04-01

Creation of Circos plot is one of the most efficient approaches to visualize genomic data. However, the installation and use of existing tools to make Circos plot are challenging for users lacking of coding experiences. To address this issue, we developed an R/Shiny application shinyCircos, a graphical user interface for interactive creation of Circos plot. shinyCircos can be easily installed either on computers for personal use or on local or public servers to provide online use to the community. Furthermore, various types of Circos plots could be easily generated and decorated with simple mouse-click. shinyCircos and its manual are freely available at https://github.com/venyao/shinyCircos. shinyCircos is deployed at https://yimingyu.shinyapps.io/shinycircos/ and http://shinycircos.ncpgr.cn/ for online use. diana1983941@mail.hzau.edu.cn or yaowen@henau.edu.cn.

Evenly spaced Detrended Fluctuation Analysis: Selecting the number of points for the diffusion plot

Science.gov (United States)

Liddy, Joshua J.; Haddad, Jeffrey M.

2018-02-01

Detrended Fluctuation Analysis (DFA) has become a widely-used tool to examine the correlation structure of a time series and provided insights into neuromuscular health and disease states. As the popularity of utilizing DFA in the human behavioral sciences has grown, understanding its limitations and how to properly determine parameters is becoming increasingly important. DFA examines the correlation structure of variability in a time series by computing α, the slope of the log SD- log n diffusion plot. When using the traditional DFA algorithm, the timescales, n, are often selected as a set of integers between a minimum and maximum length based on the number of data points in the time series. This produces non-uniformly distributed values of n in logarithmic scale, which influences the estimation of α due to a disproportionate weighting of the long-timescale regions of the diffusion plot. Recently, the evenly spaced DFA and evenly spaced average DFA algorithms were introduced. Both algorithms compute α by selecting k points for the diffusion plot based on the minimum and maximum timescales of interest and improve the consistency of α estimates for simulated fractional Gaussian noise and fractional Brownian motion time series. Two issues that remain unaddressed are (1) how to select k and (2) whether the evenly-spaced DFA algorithms show similar benefits when assessing human behavioral data. We manipulated k and examined its effects on the accuracy, consistency, and confidence limits of α in simulated and experimental time series. We demonstrate that the accuracy and consistency of α are relatively unaffected by the selection of k. However, the confidence limits of α narrow as k increases, dramatically reducing measurement uncertainty for single trials. We provide guidelines for selecting k and discuss potential uses of the evenly spaced DFA algorithms when assessing human behavioral data.

Effects of pocket gopher burrowing on cesium-133 distribution on engineered test plots

International Nuclear Information System (INIS)

Gonzales, G.J.; Saladen, M.T.; Hakonson, T.E.

1995-01-01

Very low levels of radionuclides exist on soil surfaces. Biological factors including vegetation and animal burrowing can influence the fate of these surface contaminants. Animal burrowing introduces variability in radionuclide migration that confounds estimation of nuclide migration pathways, risk assessment, and assessment of waste burial performance. A field study on the surface and subsurface erosional transport of surface-applied 133 Cs as affected by pocket gopher (Thomomys bottae) burrowing was conducted on simulated waste landfill caps at the Los Alamos National Laboratory in north central New Mexico. Surface loss of Cs, adhered to five soil particle size ranges, was measured several times over an 18-mo period while simulated rainfalls were in progress. Gophers reduced Cs surface loss by significant amounts, 43%. Cesium surface loss on plots with only gophers was 0.8 kg totalled for the study period. This compared with 1.4 kg for control plots, 0.5 kg for vegetated plots, and 0.2 kg for plots with both gophers and vegetation. The change in Cs surface loss over time was significant (P -1 ). Vegetation-bearing plots bad significant more total subsurface Cs (μ = 1.7 g kg -1 ) than plots without vegetation (μ = 0.8 g kg -1 ). An average of 97% of the subsurface Cs in plots with vegetation was located in the upper 15 cm of soil (SDR1 + SDR2) compared with 67% for plots without vegetation. Vegetation moderated the influence of gopher activity on the transport of Cs to soil subsurface, and stabilized subsurface Cs by concentrating it in the rhizosphere. Gopher activity may have caused Cs transport to depths below that sampled, 30 cm. The results provide distribution coefficients for models of contaminant migration where animal burrowing occurs. 35 refs., 2 figs., 3 tabs

Portable and Airborne Small Footprint LiDAR: Forest Canopy Structure Estimation of Fire Managed Plots

Directory of Open Access Journals (Sweden)

Claudia M.C.S. Listopad

2011-06-01

Full Text Available This study used an affordable ground-based portable LiDAR system to provide an understanding of the structural differences between old-growth and secondary-growth Southeastern pine. It provided insight into the strengths and weaknesses in the structural determination of portable systems in contrast to airborne LiDAR systems. Portable LiDAR height profiles and derived metrics and indices (e.g., canopy cover, canopy height were compared among plots with different fire frequency and fire season treatments within secondary forest and old growth plots. The treatments consisted of transitional season fire with four different return intervals: 1-yr, 2-yr, 3-yr fire return intervals, and fire suppressed plots. The remaining secondary plots were treated using a 2-yr late dormant season fire cycle. The old growth plots were treated using a 2-yr growing season fire cycle. Airborne and portable LiDAR derived canopy cover were consistent throughout the plots, with significantly higher canopy cover values found in 3-yr and fire suppressed plots. Portable LiDAR height profile and metrics presented a higher sensitivity in capturing subcanopy elements than the airborne system, particularly in dense canopy plots. The 3-dimensional structures of the secondary plots with varying fire return intervals were dramatically different to old-growth plots, where a symmetrical distribution with clear recruitment was visible. Portable LiDAR, even though limited to finer spatial scales and specific biases, is a low-cost investment with clear value for the management of forest canopy structure.

Behavior of QQ-plots and genomic control in studies of gene-environment interaction.

Directory of Open Access Journals (Sweden)

Arend Voorman

2011-05-01

Full Text Available Genome-wide association studies of gene-environment interaction (GxE GWAS are becoming popular. As with main effects GWAS, quantile-quantile plots (QQ-plots and Genomic Control are being used to assess and correct for population substructure. However, in G x E work these approaches can be seriously misleading, as we illustrate; QQ-plots may give strong indications of substructure when absolutely none is present. Using simulation and theory, we show how and why spurious QQ-plot inflation occurs in G x E GWAS, and how this differs from main-effects analyses. We also explain how simple adjustments to standard regression-based methods used in G x E GWAS can alleviate this problem.

Similarity-dissimilarity plot for visualization of high dimensional data in biomedical pattern classification.

Science.gov (United States)

Arif, Muhammad

2012-06-01

In pattern classification problems, feature extraction is an important step. Quality of features in discriminating different classes plays an important role in pattern classification problems. In real life, pattern classification may require high dimensional feature space and it is impossible to visualize the feature space if the dimension of feature space is greater than four. In this paper, we have proposed a Similarity-Dissimilarity plot which can project high dimensional space to a two dimensional space while retaining important characteristics required to assess the discrimination quality of the features. Similarity-dissimilarity plot can reveal information about the amount of overlap of features of different classes. Separable data points of different classes will also be visible on the plot which can be classified correctly using appropriate classifier. Hence, approximate classification accuracy can be predicted. Moreover, it is possible to know about whom class the misclassified data points will be confused by the classifier. Outlier data points can also be located on the similarity-dissimilarity plot. Various examples of synthetic data are used to highlight important characteristics of the proposed plot. Some real life examples from biomedical data are also used for the analysis. The proposed plot is independent of number of dimensions of the feature space.

Experts’ Misinterpretation of Box Plots – a Dual Processing Approach

Directory of Open Access Journals (Sweden)

Stephanie Lem

2014-11-01

Full Text Available Recent studies have shown that students often misinterpret the area of the box in box plots as representing the frequency or proportion of observations in that interval, while it actually represents density. This misinterpretation has been shown to be based on the saliency of this area and can be explained by heuristic reasoning as defined by dual process theories. In this study we tested whether expert users of box plots also display this misinterpretation and show signs of the same heuristic reasoning as found in students. Using a reaction time test, we found signs of heuristic reasoning in experts, both with respect to accuracy and reaction times. If even experts have difficulty interpreting box plots, one can question whether these are an appropriate form of representation to use when reporting data and deserve the prominent place they currently have in the statistics curriculum.

Surveillance of Site A and Plot M report for 1991

International Nuclear Information System (INIS)

Golchert, N.W.

1992-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for CY 1991 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976--1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) determine the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and surface stream. For many years it was the only radionclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of borehole next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site or those living in the vicinity

Surveillance of Site A and Plot M. Report for 1996

International Nuclear Information System (INIS)

Golchert, N.W.

1997-05-01

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for 1996 are presented. The surveillance program is the ongoing remedial action that resulted from the 1976-1978 radiological characterization of the site. That study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current program consists of sample collection and analysis of air, surface and subsurface water, and bottom sediment. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) generally characterize the radiological environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Tritiated water continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. For many years it was the only radionuclide found to have migrated in measurable quantities. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The available data does not allow a firm conclusion as to whether the presence of this nuclide represents recent migration or movement that may have occurred before Plot M was capped. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity

Mars Science Laboratory Launch-Arrival Space Study: A Pork Chop Plot Analysis

Science.gov (United States)

Cianciolo, Alicia Dwyer; Powell, Richard; Lockwood, Mary Kae

2006-01-01

Launch-Arrival, or "pork chop", plot analysis can provide mission designers with valuable information and insight into a specific launch and arrival space selected for a mission. The study begins with the array of entry states for each pair of selected Earth launch and Mars arrival dates, and nominal entry, descent and landing trajectories are simulated for each pair. Parameters of interest, such as maximum heat rate, are plotted in launch-arrival space. The plots help to quickly identify launch and arrival regions that are not feasible under current constraints or technology and also provide information as to what technologies may need to be developed to reach a desired region. This paper provides a discussion of the development, application, and results of a pork chop plot analysis to the Mars Science Laboratory mission. This technique is easily applicable to other missions at Mars and other destinations.

Variable Selection Strategies for Small-area Estimation Using FIA Plots and Remotely Sensed Data

Science.gov (United States)

Andrew Lister; Rachel Riemann; James Westfall; Mike Hoppus

2005-01-01

The USDA Forest Service's Forest Inventory and Analysis (FIA) unit maintains a network of tens of thousands of georeferenced forest inventory plots distributed across the United States. Data collected on these plots include direct measurements of tree diameter and height and other variables. We present a technique by which FIA plot data and coregistered...

Crop residue decomposition in Minnesota biochar-amended plots

Science.gov (United States)

Weyers, S. L.; Spokas, K. A.

2014-06-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different plant-based feedstocks and pyrolysis platforms in the fall of 2008. Litterbags containing wheat straw material were buried in July of 2011 below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a uncharred wood-pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Overall, these findings indicate that no significant alteration in the microbial dynamics of the soil decomposer communities occurred as a consequence of the application of plant-based biochars evaluated here.

Crop residue decomposition in Minnesota biochar amended plots

Science.gov (United States)

Weyers, S. L.; Spokas, K. A.

2014-02-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with biochars made from different feedstocks and pyrolysis platforms prior to the start of this study. Litterbags containing wheat straw material were buried below the soil surface in a continuous-corn cropped field in plots that had received one of seven different biochar amendments or a non-charred wood pellet amendment 2.5 yr prior to start of this study. Litterbags were collected over the course of 14 weeks. Microbial biomass was assessed in treatment plots the previous fall. Though first-order decomposition rate constants were positively correlated to microbial biomass, neither parameter was statistically affected by biochar or wood-pellet treatments. The findings indicated only a residual of potentially positive and negative initial impacts of biochars on residue decomposition, which fit in line with established feedstock and pyrolysis influences. Though no significant impacts were observed with field-weathered biochars, effective soil management may yet have to account for repeat applications of biochar.

Multiscale Poincaré plots for visualizing the structure of heartbeat time series.

Science.gov (United States)

Henriques, Teresa S; Mariani, Sara; Burykin, Anton; Rodrigues, Filipa; Silva, Tiago F; Goldberger, Ary L

2016-02-09

Poincaré delay maps are widely used in the analysis of cardiac interbeat interval (RR) dynamics. To facilitate visualization of the structure of these time series, we introduce multiscale Poincaré (MSP) plots. Starting with the original RR time series, the method employs a coarse-graining procedure to create a family of time series, each of which represents the system's dynamics in a different time scale. Next, the Poincaré plots are constructed for the original and the coarse-grained time series. Finally, as an optional adjunct, color can be added to each point to represent its normalized frequency. We illustrate the MSP method on simulated Gaussian white and 1/f noise time series. The MSP plots of 1/f noise time series reveal relative conservation of the phase space area over multiple time scales, while those of white noise show a marked reduction in area. We also show how MSP plots can be used to illustrate the loss of complexity when heartbeat time series from healthy subjects are compared with those from patients with chronic (congestive) heart failure syndrome or with atrial fibrillation. This generalized multiscale approach to Poincaré plots may be useful in visualizing other types of time series.

Looking at large data sets using binned data plots

Energy Technology Data Exchange (ETDEWEB)

Carr, D.B.

1990-04-01

This report addresses the monumental challenge of developing exploratory analysis methods for large data sets. The goals of the report are to increase awareness of large data sets problems and to contribute simple graphical methods that address some of the problems. The graphical methods focus on two- and three-dimensional data and common task such as finding outliers and tail structure, assessing central structure and comparing central structures. The methods handle large sample size problems through binning, incorporate information from statistical models and adapt image processing algorithms. Examples demonstrate the application of methods to a variety of publicly available large data sets. The most novel application addresses the too many plots to examine'' problem by using cognostics, computer guiding diagnostics, to prioritize plots. The particular application prioritizes views of computational fluid dynamics solution sets on the fly. That is, as each time step of a solution set is generated on a parallel processor the cognostics algorithms assess virtual plots based on the previous time step. Work in such areas is in its infancy and the examples suggest numerous challenges that remain. 35 refs., 15 figs.

A user's guide of a plotting program PLTJOINT

International Nuclear Information System (INIS)

Sasaki, Makoto; Sato, Wakaei; Nakagawa, Masayuki; Mori, Takamasa

1988-02-01

A plotting program PLTJOINT is able to plot various types of input and output data from neutronics calculations with two dimensional coordinates. These data include cross sections, neutron flux or spectrum, reaction rate distribution and auxiliary data. These are read from the input and output files of the JOINT system and the transport code system using double differential form cross section, and from arbitrary BCD input file. General purpose option is also available. Much care is taken in lettering such as types of characters (italic, Greek letters and characters), super and subscript of alphabet and numeral. Users can design their own characters by using a program IGDRASIL. Most of input data can be read in free format. The code has been programed so flexibly that new functions can be easily added to. (author)

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

2016-01-01

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ 2 ) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States); Herrera-Gomez, Alberto [CINVESTAV-Unidad Queretaro, Queretaro, 76230 (Mexico); Terry, Jeff [Department of Physics, Illinois Institute of Technology, Chicago, IL, 60616 (United States); Linford, Matthew R., E-mail: mrlinford@chem.byu.edu [Department of Chemistry and Biochemistry, Brigham Young University, Provo, UT, 84606 (United States)

2016-11-30

Highlights: • Uniqueness plots are introduced as a new tool for identifying poor XPS peak fits. • Uniqueness plots are demonstrated on real XPS data sets. • A horizontal line in a uniqueness plot indicates a poor fit, i.e., fit parameter correlation. • A parabolic shape in a uniqueness plot indicates that a fit may be appropriate. - Abstract: Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ{sup 2}) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

Size and form of plots for the culture of the Italian pumpkin in plastic greenhouse Tamanho e forma de parcelas para a cultura da abóbora italiana cultivada em estufa plástica

Directory of Open Access Journals (Sweden)

Rodrigo Machado Mello

2004-01-01

Full Text Available Quality control is the guaranty that experimental error is kept under acceptable levels, and the definition of the proper size and form of experimental plots ensures acurate experimental planning. This paper aims to determine the proper plot size and shape for the culture of the Italian pumpkin in protected environments. Two experiments were set in plastic green house in distinct crop seasons: either Summer-Fall or Winter-Spring season. The experiment comprised eight, 23-m long lines with 20 plants each, and fruit weight was considered the main performance parameter. Estimates of best plots size and shape were obtained by the maximum curvature, variance comparison and Hatheway methods. The plot size and shape varied according to the season and the ideal size and shape, according to the maximum curvature and Hatheway methods, to the Summer-Fall and Winter-Spring seasons, were eight plants (4 ´ 2 plot and four plants (2 ´ 2 plot, respectively.Na experimentação é de fundamental importância o controle de qualidade, fazendo com que o erro experimental apresente-se em níveis aceitáveis e, uma das formas desse controle, é a definição do tamanho e forma ótimos de parcela, no planejamento experimental. Determinou-se o tamanho e a forma ideais de parcela, para a cultura da abóbora italiana, em experimentos realizados sob ambientes protegidos, avaliando-se o rendimento acumulado da fitomassa dos frutos. Foram conduzidos dois experimentos em estufa plástica, modelo arco pampeano, durante o ano de 2001, em duas épocas de cultivo, um na estação sazonal verão-outono e outro na estação sazonal inverno-primavera. Os experimentos foram constituídos de oito fileiras de 20m de comprimento, sendo que, em cada uma delas, foram alocadas 20 plantas. As estimativas do tamanho e da forma de parcela foram obtidas pelos métodos da máxima curvatura, da comparação das variâncias e de Hatheway. As estimativas do tamanho e da forma da parcela variaram

The Zombie Plot: A Simple Graphic Method for Visualizing the Efficacy of a Diagnostic Test.

Science.gov (United States)

Richardson, Michael L

2016-08-09

One of the most important jobs of a radiologist is to pick the most appropriate imaging test for a particular clinical situation. Making a proper selection sometimes requires statistical analysis. The objective of this article is to introduce a simple graphic technique, an ROC plot that has been divided into zones of mostly bad imaging efficacy (ZOMBIE, hereafter referred to as the "zombie plot"), that transforms information about imaging efficacy from the numeric domain into the visual domain. The numeric rationale for the use of zombie plots is given, as are several examples of the clinical use of these plots. Two online calculators are described that simplify the process of producing a zombie plot.

D-GENIES: dot plot large genomes in an interactive, efficient and simple way.

Science.gov (United States)

Cabanettes, Floréal; Klopp, Christophe

2018-01-01

Dot plots are widely used to quickly compare sequence sets. They provide a synthetic similarity overview, highlighting repetitions, breaks and inversions. Different tools have been developed to easily generated genomic alignment dot plots, but they are often limited in the input sequence size. D-GENIES is a standalone and web application performing large genome alignments using minimap2 software package and generating interactive dot plots. It enables users to sort query sequences along the reference, zoom in the plot and download several image, alignment or sequence files. D-GENIES is an easy-to-install, open-source software package (GPL) developed in Python and JavaScript. The source code is available at https://github.com/genotoul-bioinfo/dgenies and it can be tested at http://dgenies.toulouse.inra.fr/.

EcoIS: An image serialization library for plot-based plant flowering phenology

DEFF Research Database (Denmark)

Granados, Joel A.; Bonnet, Philippe; Hansen, Lars Hostrup

2013-01-01

they are produced by introducing an open source Python (www.python.org) library called EcoIS that creates image series from unaligned pictures of specially equipped plots. We use EcoIS to sample flowering phenology plots in a high arctic environment and create image series that later generate phenophase counts...

Rapid responses of permafrost and vegetation to experimentally increased snow cover in sub-arctic Sweden

International Nuclear Information System (INIS)

Johansson, Margareta; Bosiö, Julia; Akerman, H Jonas; Jackowicz-Korczynski, Marcin; Christensen, Torben R; Callaghan, Terry V

2013-01-01

Increased snow depth already observed, and that predicted for the future are of critical importance to many geophysical and biological processes as well as human activities. The future characteristics of sub-arctic landscapes where permafrost is particularly vulnerable will depend on complex interactions between snow cover, vegetation and permafrost. An experimental manipulation was, therefore, set up on a lowland peat plateau with permafrost, in northernmost Sweden, to simulate projected future increases in winter precipitation and to study their effects on permafrost and vegetation. After seven years of treatment, statistically significant differences between manipulated and control plots were found in mean winter ground temperatures, which were 1.5 ° C higher in manipulated plots. During the winter, a difference in minimum temperatures of up to 9 ° C higher could be found in individual manipulated plots compared with control plots. Active layer thicknesses increased at the manipulated plots by almost 20% compared with the control plots and a mean surface subsidence of 24 cm was recorded in the manipulated plots compared to 5 cm in the control plots. The graminoid Eriophorum vaginatum has expanded in the manipulated plots and the vegetation remained green longer in the season. (letter)

Fitting diameter distribution models to data from forest inventories with concentric plot design

Directory of Open Access Journals (Sweden)

Nikos Nanos

2017-10-01

Research highlights:We designed a new method to fit the Weibull distribution to forest inventory data from concentric plots that achieves high accuracy and precision in parameter estimates regardless of the within-plot spatial tree pattern.

The hexagon/panel system for selecting FIA plots under an annual inventory

Science.gov (United States)

Gary J. Brand; Mark D. Nelson; Daniel G. Wendt; Kevin K. Nimerfro

2000-01-01

Forest Inventory and Analysis (FIA) is changing to an annual nationwide forest inventory. This paper describes the sampling grid used to distribute FIA plots across the landscape and to allocate them to a particular measurement year. We also describe the integration of the F1A and Forest Health Monitoring (FHM) plot networks.

Automatic Classification of Station Quality by Image Based Pattern Recognition of Ppsd Plots

Science.gov (United States)

Weber, B.; Herrnkind, S.

2017-12-01

The number of seismic stations is growing and it became common practice to share station waveform data in real-time with the main data centers as IRIS, GEOFON, ORFEUS and RESIF. This made analyzing station performance of increasing importance for automatic real-time processing and station selection. The value of a station depends on different factors as quality and quantity of the data, location of the site and general station density in the surrounding area and finally the type of application it can be used for. The approach described by McNamara and Boaz (2006) became standard in the last decade. It incorporates a probability density function (PDF) to display the distribution of seismic power spectral density (PSD). The low noise model (LNM) and high noise model (HNM) introduced by Peterson (1993) are also displayed in the PPSD plots introduced by McNamara and Boaz allowing an estimation of the station quality. Here we describe how we established an automatic station quality classification module using image based pattern recognition on PPSD plots. The plots were split into 4 bands: short-period characteristics (0.1-0.8 s), body wave characteristics (0.8-5 s), microseismic characteristics (5-12 s) and long-period characteristics (12-100 s). The module sqeval connects to a SeedLink server, checks available stations, requests PPSD plots through the Mustang service from IRIS or PQLX/SQLX or from GIS (gempa Image Server), a module to generate different kind of images as trace plots, map plots, helicorder plots or PPSD plots. It compares the image based quality patterns for the different period bands with the retrieved PPSD plot. The quality of a station is divided into 5 classes for each of the 4 bands. Classes A, B, C, D define regular quality between LNM and HNM while the fifth class represents out of order stations with gain problems, missing data etc. Over all period bands about 100 different patterns are required to classify most of the stations available on the

The PLOT (Paleolimnological Transect) Project in the Russian Arctic

Science.gov (United States)

Gromig, R.; Andreev, A.; Baumer, M.; Bolshiyanov, D.; Fedorov, G.; Frolova, L.; Krastel, S.; Lebas, E.; Ludikova, A.; Melles, M.; Meyer, H.; Nazarova, L.; Pestryakova, L.; Savelieva, L.; Shumilovskikh, L.; Subetto, D.; Wagner, B.; Wennrich, V.

2017-12-01

The joint Russian- German project 'PLOT - Paleolimnological Transec' aims to recover lake sediment sequences along a >6000 km long longitudinal transect across the Eurasian Arctic in order to investigate the Late Quaternary climatic and environmental history. The climate history of the Arctic is of particular interest since it is the region, which is experiencing major impact of the current climate change. The project is funded for three years (2015-2018) by the Russian and German Ministries of Research. Since 2013 extensive fieldwork, including seismic surveys, coring, and hydrological investigations, was carried out at lakes Ladoga (NW Russia, pilot study), Bolshoye Shuchye (Polar Urals), Emanda (Verkhoyansk Range, field campaign planned for August 2017), Levinson-Lessing and Taymyr (Taymyr Peninsula). Fieldwork at lakes Bolshoye Shuchye, Levinson-Lessing and Taymyr was conducted in collaboration with the Russian-Norwegian CHASE (Climate History along the Arctic Seaboard of Eurasia) project. A major objective of the PLOT project was to recover preglacial sediments. A multiproxy approach was applied to the analytical work of all cores, including (bio-)geochemical, sedimentological, geophysical, and biological analyses. First data implies the presence of preglacial sediments in the cores from all lakes so far visited. Age-depth models, based on radiocarbon dating, OSL dating, paleomagnetic measurements, identification of cryptotephra, and varve counting (where applicable), are in progress. Climate variability in the records shall be compared to that recorded at Lake Eĺgygytgyn (NE Russia), which represents the master record for the Siberian Arctic. The outcome of the PLOT project will be a better understanding of the temporal and spatial variability and development of the Arctic climate. Here, we present the major results and first key interpretations of the PLOT project, along with an outlook on the future strategy and foci. First results from lakes Ladoga

Validity of the t-plot method to assess microporosity in hierarchical micro/mesoporous materials.

Science.gov (United States)

Galarneau, Anne; Villemot, François; Rodriguez, Jeremy; Fajula, François; Coasne, Benoit

2014-11-11

The t-plot method is a well-known technique which allows determining the micro- and/or mesoporous volumes and the specific surface area of a sample by comparison with a reference adsorption isotherm of a nonporous material having the same surface chemistry. In this paper, the validity of the t-plot method is discussed in the case of hierarchical porous materials exhibiting both micro- and mesoporosities. Different hierarchical zeolites with MCM-41 type ordered mesoporosity are prepared using pseudomorphic transformation. For comparison, we also consider simple mechanical mixtures of microporous and mesoporous materials. We first show an intrinsic failure of the t-plot method; this method does not describe the fact that, for a given surface chemistry and pressure, the thickness of the film adsorbed in micropores or small mesopores (plot method to estimate the micro- and mesoporous volumes of hierarchical samples is then discussed, and an abacus is given to correct the underestimated microporous volume by the t-plot method.

[Murderers in white coats--the physicians' plot against Stalin].

Science.gov (United States)

Olsen, B

1997-12-10

During the Moscow trials in 1936-38 several doctors were sentenced for participating in the murders of party leaders. As others who were accused, the doctors willingly confessed to crimes they could not possibly have committed. A second doctors' plot took place in the autumn of 1952. This time nine doctors, six of them Jews, were arrested for the attempted murder of political leaders. Only the unexpected death of Josef Stalin prevented a new wave of terror. With the single exception of Genrikh Grigorjevitsj Jagoda (1891-1938), head of the NKVD (KGB's predecessor), all those sentenced under the Moscow process are now rehabilitated. The participants of the second doctors' plot were rehabilitated immediately after Stalin's death.

Robust volcano plot: identification of differential metabolites in the presence of outliers.

Science.gov (United States)

Kumar, Nishith; Hoque, Md Aminul; Sugimoto, Masahiro

2018-04-11

The identification of differential metabolites in metabolomics is still a big challenge and plays a prominent role in metabolomics data analyses. Metabolomics datasets often contain outliers because of analytical, experimental, and biological ambiguity, but the currently available differential metabolite identification techniques are sensitive to outliers. We propose a kernel weight based outlier-robust volcano plot for identifying differential metabolites from noisy metabolomics datasets. Two numerical experiments are used to evaluate the performance of the proposed technique against nine existing techniques, including the t-test and the Kruskal-Wallis test. Artificially generated data with outliers reveal that the proposed method results in a lower misclassification error rate and a greater area under the receiver operating characteristic curve compared with existing methods. An experimentally measured breast cancer dataset to which outliers were artificially added reveals that our proposed method produces only two non-overlapping differential metabolites whereas the other nine methods produced between seven and 57 non-overlapping differential metabolites. Our data analyses show that the performance of the proposed differential metabolite identification technique is better than that of existing methods. Thus, the proposed method can contribute to analysis of metabolomics data with outliers. The R package and user manual of the proposed method are available at https://github.com/nishithkumarpaul/Rvolcano .

Experimental Simulations of Lunar Magma Ocean Crystallization: The Plot (But Not the Crust) Thickens

Science.gov (United States)

Draper, D. S.; Rapp, J. F.; Elardo, S. M.; Shearer, C. K., Jr.; Neal, C. R.

2016-01-01

Numerical models of differentiation of a global-scale lunar magma ocean (LMO) have raised as many questions as they have answered. Recent orbital missions and sample studies have provided new context for a large range of lithologies, from the comparatively magnesian "purest anorthosite" reported by to Si-rich domes and spinel-rich clasts with widespread areal distributions. In addition, the GRAIL mission provided strong constraints on lunar crustal density and average thickness. Can this increasingly complex geology be accounted for via the formation and evolution of the LMO? We have in recent years been conducting extensive sets of petrologic experiments designed to fully simulate LMO crystallization, which had not been attempted previously. Here we review the key results from these experiments, which show that LMO differentiation is more complex than initial models suggested. Several important features expected from LMO crystallization models have yet to be reproduced experimentally; combined modelling and experimental work by our group is ongoing.

Including the Tukey Mean-Difference (Bland-Altman) Plot in a Statistics Course

Science.gov (United States)

Kozak, Marcin; Wnuk, Agnieszka

2014-01-01

The Tukey mean-difference plot, also called the Bland-Altman plot, is a recognized graphical tool in the exploration of biometrical data. We show that this technique deserves a place on an introductory statistics course by encouraging students to think about the kind of graph they wish to create, rather than just creating the default graph for the…

Robust reconstruction of a signal from its unthresholded recurrence plot subject to disturbances

Energy Technology Data Exchange (ETDEWEB)

Sipers, Aloys, E-mail: aloys.sipers@zuyd.nl [Department of Bèta Sciences and Technology, Zuyd University (Netherlands); Borm, Paul, E-mail: paul.borm@zuyd.nl [Department of Bèta Sciences and Technology, Zuyd University (Netherlands); Peeters, Ralf, E-mail: ralf.peeters@maastrichtuniversity.nl [Department of Data Science and Knowledge Engineering, Maastricht University (Netherlands)

2017-02-12

To make valid inferences from recurrence plots for time-delay embedded signals, two underlying key questions are: (1) to what extent does an unthresholded recurrence (URP) plot carry the same information as the signal that generated it, and (2) how does the information change when the URP gets distorted. We studied the first question in our earlier work , where it was shown that the URP admits the reconstruction of the underlying signal (up to its mean and a choice of sign) if and only if an associated graph is connected. Here we refine this result and we give an explicit condition in terms of the embedding parameters and the discrete Fourier spectrum of the URP. We also develop a method for the reconstruction of the underlying signal which overcomes several drawbacks that earlier approaches had. To address the second question we investigate robustness of the proposed reconstruction method under disturbances. We carry out two simulation experiments which are characterized by a broad band and a narrow band spectrum respectively. For each experiment we choose a noise level and two different pairs of embedding parameters. The conventional binary recurrence plot (RP) is obtained from the URP by thresholding and zero-one conversion, which can be viewed as severe distortion acting on the URP. Typically the reconstruction of the underlying signal from an RP is expected to be rather inaccurate. However, by introducing the concept of a multi-level recurrence plot (MRP) we propose to bridge the information gap between the URP and the RP, while still achieving a high data compression rate. We demonstrate the working of the proposed reconstruction procedure on MRPs, indicating that MRPs with just a few discretization levels can usually capture signal properties and morphologies more accurately than conventional RPs. - Highlights: • A recurrence plot is maximally informative if and only if the corresponding graph is connected. • The diameter of the connected graph is always

Reproducibility Between Brain Uptake Ratio Using Anatomic Standardization and Patlak-Plot Methods.

Science.gov (United States)

Shibutani, Takayuki; Onoguchi, Masahisa; Noguchi, Atsushi; Yamada, Tomoki; Tsuchihashi, Hiroko; Nakajima, Tadashi; Kinuya, Seigo

2015-12-01

The Patlak-plot and conventional methods of determining brain uptake ratio (BUR) have some problems with reproducibility. We formulated a method of determining BUR using anatomic standardization (BUR-AS) in a statistical parametric mapping algorithm to improve reproducibility. The objective of this study was to demonstrate the inter- and intraoperator reproducibility of mean cerebral blood flow as determined using BUR-AS in comparison to the conventional-BUR (BUR-C) and Patlak-plot methods. The images of 30 patients who underwent brain perfusion SPECT were retrospectively used in this study. The images were reconstructed using ordered-subset expectation maximization and processed using an automatic quantitative analysis for cerebral blood flow of ECD tool. The mean SPECT count was calculated from axial basal ganglia slices of the normal side (slices 31-40) drawn using a 3-dimensional stereotactic region-of-interest template after anatomic standardization. The mean cerebral blood flow was calculated from the mean SPECT count. Reproducibility was evaluated using coefficient of variation and Bland-Altman plotting. For both inter- and intraoperator reproducibility, the BUR-AS method had the lowest coefficient of variation and smallest error range about the Bland-Altman plot. Mean CBF obtained using the BUR-AS method had the highest reproducibility. Compared with the Patlak-plot and BUR-C methods, the BUR-AS method provides greater inter- and intraoperator reproducibility of cerebral blood flow measurement. © 2015 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

Surveillance of Site A and Plot M, Report for 2008.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.

2009-05-07

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2008 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M, Report for 2009.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.

2010-04-21

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2009 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M report for 2010.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W. (ESQ)

2011-05-31

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2010 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to monitor the migration pathway of hydrogen-3 contaminated water from the burial ground (Plot M) to the hand-pumped picnic wells and monitor for the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of site A and plot M, report for 2007.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2008-03-25

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2007 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to: (1) monitor the migration pathway of water from the burial ground (Plot M) to the hand-pumped picnic wells, (2) establish if other buried radionuclides have migrated, and (3) monitor the presence of radioactive materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M - Report for 2006.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2007-05-07

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2006 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby hand-pumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (PlotM) to the hand pumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red GateWoods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Surveillance of Site A and Plot M - Report for 2005.

Energy Technology Data Exchange (ETDEWEB)

Golchert, N. W.; ESH/QA Oversight

2006-04-10

The results of the environmental surveillance program conducted at Site A/Plot M in the Palos Forest Preserve area for Calendar Year 2005 are presented. Based on the results of the 1976-1978 radiological characterization of the site, a determination was made that a surveillance program be established. The characterization study determined that very low levels of hydrogen-3 (as tritiated water) had migrated from the burial ground and were present in two nearby handpumped picnic wells. The current surveillance program began in 1980 and consists of sample collection and analysis of surface and subsurface water. The results of the analyses are used to (1) monitor the migration pathway of water from the burial ground (Plot M) to the handpumped picnic wells, (2) establish if buried radionuclides other than hydrogen-3 have migrated, and (3) monitor the presence of radioactive and chemically hazardous materials in the environment of the area. Hydrogen-3 in the Red Gate Woods picnic wells was still detected this year, but the average and maximum concentrations were significantly less than found earlier. Hydrogen-3 continues to be detected in a number of wells, boreholes, dolomite holes, and a surface stream. Analyses since 1984 have indicated the presence of low levels of strontium-90 in water from a number of boreholes next to Plot M. The results of the surveillance program continue to indicate that the radioactivity remaining at Site A/Plot M does not endanger the health or safety of the public visiting the site, using the picnic area, or living in the vicinity.

Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD: The revisiting of the Williamson-Hall plot method

Science.gov (United States)

Kibasomba, Pierre M.; Dhlamini, Simon; Maaza, Malik; Liu, Chuan-Pu; Rashad, Mohamed M.; Rayan, Diaa A.; Mwakikunga, Bonex W.

2018-06-01

The Williamson-Hall (W-H) equation, which has been used to obtain relative crystallite sizes and strains between samples since 1962, is revisited. A modified W-H equation is derived which takes into account the Scherrer equation, first published in 1918, (which traditionally gives more absolute crystallite size prediction) and strain prediction from Raman spectra. It is found that W-H crystallite sizes are on average 2.11 ± 0.01 times smaller than the sizes from Scherrer equation. Furthermore the strain from the W-H plots when compared to strain obtained from Raman spectral red-shifts yield factors whose values depend on the phases in the materials - whether anatase, rutile or brookite. Two main phases are identified in the annealing temperatures (350 °C-700 °C) chosen herein - anatase and brookite. A transition temperature of 550 °C has been found for nano-TiO2 to irreversibly transform from brookite to anatase by plotting the Raman peak shifts against the annealing temperatures. The W-H underestimation on the strain in the brookite phase gives W-H/Raman factor of 3.10 ± 0.05 whereas for the anatase phase, one gets 2.46 ± 0.03. The new βtot2cos2θ-sinθ plot and when fitted with a polynomial yield less strain but much better matching with experimental TEM crystallite sizes and the agglomerates than both the traditional Williamson-Hall and the Scherrer methods. There is greater improvement in the model when linearized - that is the βtotcos2θ-sinθ plot rather than the βtot2cos2θ-sinθ plot.

D.3.2 PLOT Persuasive Learning Design Framework

DEFF Research Database (Denmark)

Gram-Hansen, Sandra Burri; Schärfe, Henrik; Winther-Nielsen, Nicolai

2011-01-01

of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool, and a selection of GLOs and learning exercises. The primary focus of the analysis is to explore how the theoretical perspectives presented in D.3.1 are represented in these tools...... as an: ‚Internal report for project use containing an empirically-based assessment of existing systems and their potential in terms of learning and persuasion. This will be used as a discussion document by the consortium.‛ To meet the requirements of this deliverable, this documents presents analysis......, in particular the notions of persuasive design and constructive alignment. Whilst the report provides a persuasive design perspective on the technologies related to Euro PLOT, it must be stressed that if the document is to function as a basis for further discussion within the consortium, the partners...

CADASTRAL CLASSIFICATION OF THE LAND PLOTS IN UKRAINE

Directory of Open Access Journals (Sweden)

KIRICHEK Yu. O.

2016-04-01

Full Text Available Summary. Work concerns development of national system of classification of the land plots. The developed classification will allow to solve correctly a number of the corresponding cadastral, land management, estimated and other tasks. The analysis of classifications of lands, improvements and real estate in general is made. The created offers concerning creation of a new classification of the land plots in Ukraine. Today the Ukrainian real estate market has no single system that separates the system property groups, classes and types. This significantly complicates the work and can not fully be aware of the specific situation of real estate market. This task is designed to solve classification properties, it is used to transition from a diversity of individual properties to a limited number of classes of evaluation objects. The classification is different functional purpose (use facilities assessment, which determines the difference in value.

Persuasive Technology for Learning and Teaching – The EuroPLOT Project

OpenAIRE

Behringer, R; Soosay, M; Gram-Hansen, SB; Øhrstrøm, P; Sørensen, CG; Smith, C; Mikulecká, J; Winther-Nielsen, N; Winther-Nielsen, M; Herber, E

2013-01-01

The concept of persuasive design has demonstrated its benefits by changing human behavior in certain situations, but in the area of education and learning, this approach has rarely been used. To change this and to study the feasibility of persuasive technology in teaching and learning, the EuroPLOT project (PLOT = Persuasive Learning Objects and Technologies) has been funded 2010-2013 by the Education, Audiovisual and Culture Executive Agency (EACEA) in the Life-long Learning (LLL) programme....

Comparative evolutionary diversity and phylogenetic structure across multiple forest dynamics plots: a mega-phylogeny approach

Science.gov (United States)

Erickson, David L.; Jones, Frank A.; Swenson, Nathan G.; Pei, Nancai; Bourg, Norman A.; Chen, Wenna; Davies, Stuart J.; Ge, Xue-jun; Hao, Zhanqing; Howe, Robert W.; Huang, Chun-Lin; Larson, Andrew J.; Lum, Shawn K. Y.; Lutz, James A.; Ma, Keping; Meegaskumbura, Madhava; Mi, Xiangcheng; Parker, John D.; Fang-Sun, I.; Wright, S. Joseph; Wolf, Amy T.; Ye, W.; Xing, Dingliang; Zimmerman, Jess K.; Kress, W. John

2014-01-01

Forest dynamics plots, which now span longitudes, latitudes, and habitat types across the globe, offer unparalleled insights into the ecological and evolutionary processes that determine how species are assembled into communities. Understanding phylogenetic relationships among species in a community has become an important component of assessing assembly processes. However, the application of evolutionary information to questions in community ecology has been limited in large part by the lack of accurate estimates of phylogenetic relationships among individual species found within communities, and is particularly limiting in comparisons between communities. Therefore, streamlining and maximizing the information content of these community phylogenies is a priority. To test the viability and advantage of a multi-community phylogeny, we constructed a multi-plot mega-phylogeny of 1347 species of trees across 15 forest dynamics plots in the ForestGEO network using DNA barcode sequence data (rbcL, matK, and psbA-trnH) and compared community phylogenies for each individual plot with respect to support for topology and branch lengths, which affect evolutionary inference of community processes. The levels of taxonomic differentiation across the phylogeny were examined by quantifying the frequency of resolved nodes throughout. In addition, three phylogenetic distance (PD) metrics that are commonly used to infer assembly processes were estimated for each plot [PD, Mean Phylogenetic Distance (MPD), and Mean Nearest Taxon Distance (MNTD)]. Lastly, we examine the partitioning of phylogenetic diversity among community plots through quantification of inter-community MPD and MNTD. Overall, evolutionary relationships were highly resolved across the DNA barcode-based mega-phylogeny, and phylogenetic resolution for each community plot was improved when estimated within the context of the mega-phylogeny. Likewise, when compared with phylogenies for individual plots, estimates of

Radiological site assessment at sun rose claim utilizing ScanPlot{sup SM} technology

Energy Technology Data Exchange (ETDEWEB)

Downey, H., E-mail: heath.downey@amecfw.com [Amec Foster Wheeler, Portland, ME (United States)

2015-07-01

ScanPlot{sup SM} gamma spectroscopy land survey system was utilized for the overland survey of uranium at the Sun Rose Claim in the Northwest Territories. The Sun Rose Claim is a former uranium exploration site and previous investigations had identified uranium ore and waste rock. ScanPlot{sup SM} radiological scan surveys were performed utilizing a backpack system. ScanPlot{sup SM} platform utilized spectroscopy grade sodium iodide detectors configured for optimal spatial coverage and radiation detection. Survey locations were recorded using an on-board global positioning system (GPS). The radiological spectral data from the radiation detectors is automatically logged and linked with the GPS coordinates to an on-board computer to create isocontour figures using a color scale to represent radioactivity levels. The advantage of utilizing the ScanPlot{sup SM} system for this assessment is that the nature and extent of uranium is provided without having to collect and assay a large number of samples. (author)

Estimation of Alcohol Concentration of Red Wine Based on Cole-Cole Plot

Science.gov (United States)

Watanabe, Kota; Taka, Yoshinori; Fujiwara, Osamu

To evaluate the quality of wine, we previously measured the complex relative permittivity of wine in the frequency range from 10 MHz to 6 GHz with a network analyzer, and suggested a possibility that the maturity and alcohol concentration of wine can simultaneously be estimated from the Cole-Cole plot. Although the absolute accuracy has not been examined yet, this method will enable one to estimate the alcohol concentration of alcoholic beverages without any distillation equipment simply. In this study, to investigate the estimation accuracy of the alcohol concentration of wine by its Cole-Cole plots, we measured the complex relative permittivity of pure water and diluted ethanol solution from 100 MHz to 40 GHz, and obtained the dependence of the Cole-Cole plot parameters on alcohol concentration and temperature. By using these results as calibration data, we estimated the alcohol concentration of red wine from the Cole-Cole plots, which was compared with the measured one based on a distillation method. As a result, we have confirmed that the estimated alcohol concentration of red wine agrees with the measured results in an absolute error by less than 1 %.

ABCASH plotting program users guide

International Nuclear Information System (INIS)

Troyer, G.L.

1995-01-01

The Automated Bar Coding of Air Samples at Hanford (ABCASH) system provides an integrated data collection, sample tracking, and data reporting system for radioactive particulate air filter samples. The ABCASH plotting program provides a graphical trend report for ABCASH of the performance of air sample results. This document provides an operational guide for using the program. Based on sample location identifier and date range, a trend chart of the available data is generated. The trend chart shows radiological activity versus time. General indications of directional trend of the concentrations in air over time may be discerned. Comparison limit set point values are also shown as derived from the ABCASH data base

User Guide for the Plotting Software for the Los Alamos National Laboratory Nuclear Weapons Analysis Tools Version 2.0

Energy Technology Data Exchange (ETDEWEB)

Cleland, Timothy James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-02

The Los Alamos National Laboratory Plotting Software for the Nuclear Weapons Analysis Tools is a Java™ application based upon the open source library JFreeChart. The software provides a capability for plotting data on graphs with a rich variety of display options while allowing the viewer interaction via graph manipulation and scaling to best view the data. The graph types include XY plots, Date XY plots, Bar plots and Histogram plots.

Constructing General Orthogonal Fractional Factorial Split-Plot Designs

NARCIS (Netherlands)

Sartono, B.; Goos, P.; Schoen, E.

2015-01-01

While the orthogonal design of split-plot fractional factorial experiments has received much attention already, there are still major voids in the literature. First, designs with one or more factors acting at more than two levels have not yet been considered. Second, published work on nonregular

Enhancement to the Tektronix PLOT-10 Terminal Control System for creation of graphics metafiles

International Nuclear Information System (INIS)

Gray, W.H.

1983-01-01

Many data handling and analysis codes at the Oak Ridge National Laboratory (ORNL) use the Tektronix PLOT-10 Terminal Control System to graphically display data upon Tektronix or Tektronix-emulating graphics devices. Prior to the development of the software libraries and postprocessors discussed within this report, ORNL users were limited to the type of hardcopy output obtainable from the Tektronix PLOT-10 software library. Only Tektronix graphics devices are supported by the PLOT-10 library. The graphics library presented here eliminates this restriction by implementing a suite of software that optionally creates a graphics metafile within the user's disk area while simultaneously drawing a display image on the screen of a user's Tektronix terminal. This graphics metafile can then be postprocessed onto any of the graphics devices at ORNL via the ORNL PLOT command

Hamlet on the Macintosh: An Experimental Seminar That Worked.

Science.gov (United States)

Strange, William C.

1987-01-01

Describes experimental college Shakespeare seminar that used Macintosh computers and software called ELIZA and ADVENTURE to develop character dialogs and adventure games based on Hamlet's characters and plots. Programming languages are examined, particularly their relationship to metaphor, and the use of computers in humanities is discussed. (LRW)

Delineamento experimental e tamanho de amostra para alface cultivada em hidroponia Experimental design and sample size for hydroponic lettuce crop

Directory of Open Access Journals (Sweden)

Valéria Schimitz Marodim

2000-10-01

Full Text Available Este estudo visa a estabelecer o delineamento experimental e o tamanho de amostra para a cultura da alface (Lactuca sativa em hidroponia, pelo sistema NFT (Nutrient film technique. O experimento foi conduzido no Laboratório de Cultivos Sem Solo/Hidroponia, no Departamento de Fitotecnia da Universidade Federal de Santa Maria e baseou-se em dados de massa de plantas. Os resultados obtidos mostraram que, usando estrutura de cultivo de alface em hidroponia sobre bancadas de fibrocimento com seis canais, o delineamento experimental adequado é blocos ao acaso se a unidade experimental for constituída de faixas transversais aos canais das bancadas, e deve ser inteiramente casualizado se a bancada for a unidade experimental; para a variável massa de plantas, o tamanho da amostra é de 40 plantas para uma semi-amplitude do intervalo de confiança em percentagem da média (d igual a 5% e de 7 plantas para um d igual a 20%.This study was carried out to establish the experimental design and sample size for hydroponic lettuce (Lactuca sativa crop under nutrient film technique. The experiment was conducted in the Laboratory of Hydroponic Crops of the Horticulture Department of the Federal University of Santa Maria. The evaluated traits were plant weight. Under hydroponic conditions on concrete bench with six ducts, the most indicated experimental design for lettuce is randomised blocks for duct transversal plots or completely randomised for bench plot. The sample size for plant weight should be 40 and 7 plants, respectively, for a confidence interval of mean percentage (d equal to 5% and 20%.

On the role of final-state interactions in Dalitz plot studies

International Nuclear Information System (INIS)

Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

2012-01-01

The study of Dalitz plots of heavy-meson decays to multi-hadron final states has received intensified interest by the possibility to gain access to precision investigations of CP violation. A thorough understanding of the hadronic final-state interactions is a prerequisite to achieve a highly sensitive, model-independent study of such Dalitz plots. We illustrate some of the theoretical tools, predominantly taken from dispersion theory, available for these and related purposes, and discuss the low-energy decays ω,φ→3π in some more detail.

On the role of final-state interactions in Dalitz plot studies

Energy Technology Data Exchange (ETDEWEB)

Kubis, Bastian, E-mail: kubis@hiskp.uni-bonn.de [Helmholtz-Institut fuer Strahlen- und Kernphysik and Bethe Center for Theoretical Physics, Universitaet Bonn (Germany); Niecknig, Franz; Schneider, Sebastian P. [Helmholtz-Institut fuer Strahlen- und Kernphysik and Bethe Center for Theoretical Physics, Universitaet Bonn (Germany)

2012-04-15

The study of Dalitz plots of heavy-meson decays to multi-hadron final states has received intensified interest by the possibility to gain access to precision investigations of CP violation. A thorough understanding of the hadronic final-state interactions is a prerequisite to achieve a highly sensitive, model-independent study of such Dalitz plots. We illustrate some of the theoretical tools, predominantly taken from dispersion theory, available for these and related purposes, and discuss the low-energy decays {omega},{phi}{yields}3{pi} in some more detail.

On the role of final-state interactions in Dalitz plot studies

Science.gov (United States)

Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

2012-04-01

The study of Dalitz plots of heavy-meson decays to multi-hadron final states has received intensified interest by the possibility to gain access to precision investigations of CP violation. A thorough understanding of the hadronic final-state interactions is a prerequisite to achieve a highly sensitive, model-independent study of such Dalitz plots. We illustrate some of the theoretical tools, predominantly taken from dispersion theory, available for these and related purposes, and discuss the low-energy decays ω,ϕ→3π in some more detail.

Graphical interpretation of confidence curves in rankit plots

DEFF Research Database (Denmark)

Hyltoft Petersen, Per; Blaabjerg, Ole; Andersen, Marianne

2004-01-01

A well-known transformation from the bell-shaped Gaussian (normal) curve to a straight line in the rankit plot is investigated, and a tool for evaluation of the distribution of reference groups is presented. It is based on the confidence intervals for percentiles of the calculated Gaussian distri...

Geopolitical location and plot in The Night Manager

DEFF Research Database (Denmark)

Agger, Gunhild

2017-01-01

The Night Manager. Three perspectives are tested in combining the analysis of location with the development of the plot: the general concepts of universal and real geography; the idea of being located inside or outside a given context; and the associated notion of centre-periphery opposition. A geopolitical...

SinaPlot: an enhanced chart for simple and truthful representation of single observations over multiple classes

DEFF Research Database (Denmark)

Sidiropoulos, Nikos; Sohi, Sina Hadi; Pedersen, Thomas Lin

2017-01-01

the representation of data sets with differing sample size we have developed a new type of plot overcoming limitations of current standard visualization charts. SinaPlot is inspired by the strip chart and the violin plot and operates by letting the normalized density of points restrict the jitter along the x...

FITTING AND TESTING ALLOMETRIC EQUATIONS FOR MEXICO’S SINALOAN TROPICAL DRY TREES AND FOREST INVENTORY PLOTS

Directory of Open Access Journals (Sweden)

Jose de Jesus Navar Chaidez

2016-05-01

Full Text Available Aboveground tree biomass (bole, branches and foliage, M, plays a key role in the conventional and sustainable management of forest communities. The standard approach to assess tree or plot M is harvesting trees, developing and fitting allometric equations to trees or forest inventory plot data. In the absence of local tree allometry, it is usually recommended to fit off site allometric equations to evaluate tree or plot M. This research aims: (a to develop an updated on site allometric equation (b to fit available off site allometric equations to destructively harvested trees and (c to fit available allometric equations to plot M of Mexico’s Sinaloan tropical dry forests to understand sources of inherent tree and plot M variability. Results showed that: (a the improved on site allometric equation increases precision in contrast to the conventional biomass equation previously reported as well as to off site tree M equations, (b off site allometry projects tree and plot M deviates by close to one order of magnitude. Two tested and recommended approaches to increase tree and plot M precision when fitting off site equations are: (i to use all available tree allometric functions to come up with a mean equation or (ii to calibrate off site equations by fitting new, local parameters that can be calculated using statistical programs.These options would eventually increase tree and plot M precision in regional evaluations.

Uniqueness plots: A simple graphical tool for identifying poor peak fits in X-ray photoelectron spectroscopy

Science.gov (United States)

Singh, Bhupinder; Diwan, Anubhav; Jain, Varun; Herrera-Gomez, Alberto; Terry, Jeff; Linford, Matthew R.

2016-11-01

Peak fitting is an essential part of X-ray photoelectron spectroscopy (XPS) narrow scan analysis, and the Literature contains both good and bad examples of peak fitting. A common cause of poor peak fitting is the inclusion of too many fit parameters, often without a sound chemical and/or physical basis for them, and/or the failure to reasonably constrain them. Under these conditions, fit parameters are often correlated, and therefore lacking in statistical meaning. Here we introduce the uniqueness plot as a simple graphical tool for identifying bad peak fits in XPS, i.e., fit parameter correlation. These plots are widely used in spectroscopic ellipsometry. We illustrate uniqueness plots with two data sets: a C 1s narrow scan from ozone-treated carbon nanotube forests and an Si 2p narrow scan from an air-oxidized silicon wafer. For each fit, we consider different numbers of parameters and constraints on them. As expected, the uniqueness plots are parabolic when fewer fit parameters and/or more constraints are applied. However, they fan out and eventually become horizontal lines as more unconstrained parameters are included in the fits. Uniqueness plots are generated by plotting the chi squared (χ2) value for a fit vs. a systematically varied value of a parameter in the fit. The Abbe criterion is also considered as a figure of merit for uniqueness plots in the Supporting Information. We recommend that uniqueness plots be used by XPS practitioners for identifying inappropriate peak fits.

The Application of TD/GC/NICI-MS with an Al2O3-PLOT-S Column for the Determination of Perfluoroalkylcycloalkanes in the Atmosphere.

Science.gov (United States)

Ren, Yu; Schlager, Hans; Martin, Damien

2014-01-01

A modified method for the quantitative determination of atmospheric perfluoroalkylcycloalkanes (PFCs) using thermal desorption coupled with gas chromatography and detection by negative ion chemical ionization-mass spectrometry was developed. Using an optimized analytical system, a commercially available Al 2 O 3 porous layer open tubular (PLOT) capillary column (30 m × 0.25 mm) deactivated with Na 2 SO 4 was used for separation of PFCs. Improvements in the separation of PFCs, the corresponding identification and the limit of detection of PFCs using this method and column are presented. The method was successfully applied to determine the atmospheric background concentrations of a range of PFCs from a number of samples collected at a rural site in Germany. The results of this study suggest that the method outlined using the Al 2 O 3 -PLOT-S capillary column has good sensitivity and selectivity, and that it can be deployed in a routine laboratory process for the analysis of PFCs in the future research work. In addition, the ability of this column to separate the isomers of one of the lower boiling PFCs (perfluorodimethylcyclobutane) and its ability to resolve perfluoroethylcyclohexane offer the opportunity for single-column analysis for multiple PFCs.

Fungicides transport in runoff from vineyard plot and catchment: contribution of non-target areas.

Science.gov (United States)

Lefrancq, Marie; Payraudeau, Sylvain; García Verdú, Antonio Joaquín; Maillard, Elodie; Millet, Maurice; Imfeld, Gwenaël

2014-04-01

Surface runoff and erosion during the course of rainfall events are major processes of pesticides transport from agricultural land to aquatic ecosystem. These processes are generally evaluated either at the plot or the catchment scale. Here, we compared at both scales the transport and partitioning in runoff water of two widely used fungicides, i.e., kresoxim-methyl (KM) and cyazofamid (CY). The objective was to evaluate the relationship between fungicides runoff from the plot and from the vineyard catchment. The results show that seasonal exports for KM and CY at the catchment were larger than those obtained at the plot. This underlines that non-target areas within the catchment largely contribute to the overall load of runoff-associated fungicides. Estimations show that 85 and 62 % of the loads observed for KM and CY at the catchment outlet cannot be explained by the vineyard plots. However, the partitioning of KM and CY between three fractions, i.e., the suspended solids (>0.7 μm) and two dissolved fractions (i.e., between 0.22 and 0.7 µm and plot scales enable to evaluate the sources areas of pesticide off-site transport.

[Effects of slopes on nitrogen transport along with runoff from sloping plots on a lateritic red soil amended with sewage sludge].

Science.gov (United States)

Chen, Yan-Hui; Chen, Ming-Hua; Wang, Guo; Chen, Wen-Xiang; Yang, Shun-Cheng; Chai, Peng

2010-10-01

The effects of different slopes on nitrogen transport along with runoff from sloping plots amended with sewage sludge on a lateritic red soil were studied under simulated rainfall conditions. When the sludge was broadcasted and mixed with surface soils (BM), the MTN (total nitrogen of mixing sample), STN (total nitrogen of settled sample), TPN (total particulate nitrogen), TSN (total suspended nitrogen), TDN (total dissolved nitrogen) and NH4(+) -N concentrations and nitrogen loss amounts in runoff of all treatments were highest at 1 day or 18 days after application. The highest concentrations and the loss amounts of MTN and STN in the slope runoff for the BM treatment increased with slope degree, showing increasing pollution risks to the surface waters. The STN concentration and loss amounts from the 25 degrees plots were 126.1 mg x L(-1) and 1788.6 mg x m(-2), respectively, being 4.6 times and 5.8 times of the corresponding values from the 10 degrees plots, respectively. Then the concentrations and the loss amounts of nitrogen (except NO3(-) -N) from the BM plots diminished rapidly first and then tended to be stable with dwindling differences between the slopes. The loss of MTN and STN in early runoff (1 day and 18 days) accounted for 68.6% -73.4% and 62.3% -66.7% of the cumulative loss amounts during the experimental period for all the broadcasted treatments. Runoff loss coefficients of MTN increased in the order of 20 degrees > 25 degrees > 15 degrees > 10 degrees. Nitrogen was largely lost in dissolved species while large portion of NH4(+) -N was lost with particulates.

Chatter identification in milling of Inconel 625 based on recurrence plot technique and Hilbert vibration decomposition

Directory of Open Access Journals (Sweden)

Lajmert Paweł

2018-01-01

Full Text Available In the paper a cutting stability in the milling process of nickel based alloy Inconel 625 is analysed. This problem is often considered theoretically, but the theoretical finding do not always agree with experimental results. For this reason, the paper presents different methods for instability identification during real machining process. A stability lobe diagram is created based on data obtained in impact test of an end mill. Next, the cutting tests were conducted in which the axial cutting depth of cut was gradually increased in order to find a stability limit. Finally, based on the cutting force measurements the stability estimation problem is investigated using the recurrence plot technique and Hilbert vibration decomposition method.

The dependence of the Tauc and Cody optical gaps associated with hydrogenated amorphous silicon on the film thickness: αl Experimental limitations and the impact of curvature in the Tauc and Cody plots

Science.gov (United States)

Mok, Tat M.; O'Leary, Stephen K.

2007-12-01

Using a model for the optical spectrum associated with hydrogenated amorphous silicon, explicitly taking into account fundamental experimental limitations encountered, we theoretically determine the dependence of the Tauc and Cody optical gaps associated with hydrogenated amorphous silicon on the thickness of the film. We compare these results with that obtained from experiment. We find that the curvature in the Tauc plot plays a significant role in influencing the determination of the Tauc optical gap associated with hydrogenated amorphous silicon, thus affirming an earlier hypothesis of Cody et al. We also find that the spectral dependence of the refractive index plays an important role in influencing the determination of the Cody optical gap. It is thus clear that care must be exercised when drawing conclusions from the dependence of the Tauc and Cody optical gaps associated with hydrogenated amorphous silicon on the thickness of the film.

A tool to determine crown and plot canopy transparency for forest inventory and analysis phase 3 plots using digital photographs

Science.gov (United States)

Matthew F. Winn; Philip A. Araman

2012-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA) program collects crown foliage transparency estimates for individual trees on Phase 3 (P3) inventory plots. The FIA crown foliage estimate is obtained from a pair of perpendicular side views of the tree. Researchers with the USDA Forest Service Southern Research Station have developed a computer program that...

XNWLUP, Graphical user interface to plot WIMS-D library multigroup cross sections

International Nuclear Information System (INIS)

Ganesan, S.; Jagannathan, V.; Thiyagarajan, T.K.

2005-01-01

1 - Description of program or function: XnWlup is a computer program with user-friendly graphical interface to help the users of WIMS-D library to enable quick visualisation of the plots of the energy dependence of the multigroup cross sections of any nuclide of interest. This software enables the user to generate and view the histogram of 69 multi-group cross sections as a function of neutron energy under Microsoft Windows environment. This software is designed using Microsoft Visual C++ and Microsoft Foundation Classes Library. IAEA1395/05: New features of version 3.0: - Plotting absorption and fission cross sections of resonant nuclide after applying the self-shielding cross section. - Plotting the data of Resonant Integral table, as a function of dilution cross section for a selected temperature and for a given energy group. - Plotting the data of Resonant Integral table, as a function of temperature for a selected background dilution cross section and for a given energy group. - Clearing all the graphs except one graph from the display screen is easily done by using a tool bar button. - Displaying the coordinate of the cursor point with appropriate units. 2 - Methods: XnWlup helps to obtain histogram plots of the values of cross section data of an element/isotope available as 69-group WIMS-D library as a function of energy bins. The software XnWlup is developed with this graphical user interface in order to help those users who frequently refer to the WIMS-D library cross section data of neutron-nuclear reactions. The software also helps to produce handbook of WIMS-D cross sections

SCALPLO - a universal program for plotting flux output from SCALE modules and related programs. User's manual

International Nuclear Information System (INIS)

Hersman, A.; Leege, P.F.A. de; Hoogenboom, J.E.

1992-04-01

The FORTRAN-77 program SCALPLO is being developed to make an easy and quick graphic survey of flux and/or power data calculated with SCALE modules or other core calculation or shielding codes. The basic plot functions it can perform are one- and two-dimensional plots of flux or power distributions and flux energy spectra. More specifically it can produce plots of the flux distribution in a one-dimensional geometry for one or more energy groups in one figure. It can also plot the flux distribution along a cut through a two- or three-dimensional geometry along one of the coordinate axes and it can plot a two-dimensional view of the flux distribution of a two-dimensional geometry or of a plane cut through a three-dimensional geometry. The same can be done for the power distribution in a system. Furthermore SCALPLO can plot the particle flux spectrum as a function of energy, either as group fluxes or as group fluxes per unit energy or per unit lethargy. (orig./HP)

Long term growth of crop plants on experimental plots created among slag heaps.

Science.gov (United States)

Halecki, Wiktor; Klatka, Sławomir

2018-01-01

Suppression of plant growth is a common problem in post-mining reclaimed areas, as coarse texture of soils may increase nitrate leaching. Assessing feasibility of using solid waste (precipitated solid matter) produced by water and sewage treatment processes in field conditions is very important in mine soil reclamation. Our work investigated the possibility of plant growth in a degraded site covered with sewage-derived sludge material. A test area (21m × 18m) was established on a mine soil heap. Experimental plant species included Camelina sativa, Helianthus annuus, Festuca rubra, Miscanthus giganteus, Amaranthus cruentus, Brassica napus, Melilotus albus, Beta vulgaris, and Zea mays. ANOVA showed sufficient water content and acceptable physical properties of the soil in each year and layer in a multi-year period, indicating that these species were suitable for phytoremediation purposes. Results of trace elements assays indicated low degree of contamination caused by Carbocrash waste material and low potential ecological risk for all plant species. Detrended correspondence analysis revealed that total porosity and capillary porosity were the most important variables for the biosolids among all water content related properties. Overall, crop plants were found useful on heavily degraded land and the soil benefited from their presence. An addition of Carbocrash substrate to mine soil improved the initial stage of soil reclamation and accelerated plant growth. The use of this substrate in phytoremediation helped to balance the content of nutrients, promoted plant growth, and increased plant tolerance to salinity. Sewage sludge-amended biosolids may be applied directly to agricultural soil, not only in experimental conditions. Copyright © 2017 Elsevier Inc. All rights reserved.

Measurement of the ω → π+π-π0 Dalitz plot distribution

Science.gov (United States)

Adlarson, P.; Augustyniak, W.; Bardan, W.; Bashkanov, M.; Bergmann, F. S.; Berłowski, M.; Bhatt, H.; Bondar, A.; Büscher, M.; Calén, H.; Ciepał, I.; Clement, H.; Czerwiński, E.; Demmich, K.; Engels, R.; Erven, A.; Erven, W.; Eyrich, W.; Fedorets, P.; Föhl, K.; Fransson, K.; Goldenbaum, F.; Goswami, A.; Grigoryev, K.; Gullström, C.-O.; Heijkenskjöld, L.; Hejny, V.; Hüsken, N.; Jarczyk, L.; Johansson, T.; Kamys, B.; Kemmerling, G.; Khan, F. A.; Khatri, G.; Khoukaz, A.; Khreptak, O.; Kirillov, D. A.; Kistryn, S.; Kleines, H.; Kłos, B.; Krzemień, W.; Kulessa, P.; Kupść, A.; Kuzmin, A.; Lalwani, K.; Lersch, D.; Lorentz, B.; Magiera, A.; Maier, R.; Marciniewski, P.; Mariański, B.; Morsch, H.-P.; Moskal, P.; Ohm, H.; Perez del Rio, E.; Piskunov, N. M.; Prasuhn, D.; Pszczel, D.; Pysz, K.; Pyszniak, A.; Ritman, J.; Roy, A.; Rudy, Z.; Rundel, O.; Sawant, S.; Schadmand, S.; Schätti-Ozerianska, I.; Sefzick, T.; Serdyuk, V.; Shwartz, B.; Sitterberg, K.; Skorodko, T.; Skurzok, M.; Smyrski, J.; Sopov, V.; Stassen, R.; Stepaniak, J.; Stephan, E.; Sterzenbach, G.; Stockhorst, H.; Ströher, H.; Szczurek, A.; Trzciński, A.; Varma, R.; Wolke, M.; Wrońska, A.; Wüstner, P.; Yamamoto, A.; Zabierowski, J.; Zieliński, M. J.; Złomańczuk, J.; Żuprański, P.; Żurek, M.; Kubis, B.; Leupold, S.

2017-07-01

Using the production reactions pd →3He ω and pp → ppω, the Dalitz plot distribution for the ω →π+π-π0 decay is studied with the WASA detector at COSY, based on a combined data sample of (4.408 ± 0.042) ×104 events. The Dalitz plot density is parametrised by a product of the P-wave phase space and a polynomial expansion in the normalised polar Dalitz plot variables Z and ϕ. For the first time, a deviation from pure P-wave phase space is observed with a significance of 4.1σ. The deviation is parametrised by a linear term 1 + 2 αZ, with α determined to be + 0.147 ± 0.036, consistent with the expectations of ρ-meson-type final-state interactions of the P-wave pion pairs.

Amplitude analysis of the D+ -> K-S(0)pi + (0)(pi) Dalitz plot

NARCIS (Netherlands)

Ablikim, M.; Achasov, M. N.; Ai, X. C.; Albayrak, O.; Albrecht, M.; Ambrose, D. J.; An, F. F.; An, Q.; Bai, J. Z.; Ferroli, R. Baldini; Ban, Y.; Bennett, J. V.; Bertani, M.; Bian, J. M.; Boger, E.; Bondarenko, O.; Boyko, I.; Braun, S.; Briere, R. A.; Cai, H.; Cai, X.; Cakir, O.; Calcaterra, A.; Cao, G. F.; Cetin, S. A.; Chang, J. F.; Chelkov, G.; Chen, G.; Chen, H. S.; Chen, J. C.; Chen, M. L.; Chen, S. J.; Chen, X.; Chen, X. R.; Chen, Y. B.; Cheng, H. P.; Chu, X. K.; Chu, Y. P.; Cronin-Hennessy, D.; Dai, H. L.; Dai, J. P.; Dedovich, D.; Deng, Z. Y.; Denig, A.; Denysenko, I.; Kalantar-Nayestanaki, N.; Kavatsyuk, M.; Loehner, H.; Messchendorp, J. G.; Moeini, H.

2014-01-01

We perform an analysis of the D+ -> K-S(0)pi + (0)(pi) Dalitz plot using a data set of 2.92 fb(-1) of e(+) e(-) collisions at the (3770) mass accumulated by the BESIII experiment, in which 166694 candidate events are selected with a background of 15.1%. The Dalitz plot is found to be well

Rainfall influence on plot-scale runoff and soil loss from repeated burning in a Mediterranean-shrub ecosystem, Valencia, Spain

Science.gov (United States)

González-Pelayo, O.; Andreu, V.; Gimeno-García, E.; Campo, J.; Rubio, J. L.

2010-06-01

The effect of a repeated burning on soil hydrology and erosive parameters was studied on a Mediterranean forest soil (Rendzic leptosol) with the aim of identifying the effects of the fire and climatic parameters related to the post-fire runoff and soil loss. The study was carried out in an Experimental Permanent Field Station (La Concordia), close to Valencia (Spain). This field station is located on a calcareous hillside facing SSE, and is composed of nine erosion plots (20 × 4 m). Firstly, experimental fires were performed in June 1995 with two fire treatments (T1 or high severity fire and T2 or moderate severity fire) and a control one (unburnt, T3). The repeated fire (low severity) was carried out in July 2003. The studied period was focused from 18 months before the repeated fire (July 2003) until 18 months after it. Rainfall characteristics of each single event were recorded, which allowed us to statistically distinguish four time periods according to the rainfall intensity and duration: periods I (March 2002 to May 2003) and III (December 2003 to early May 2004) with low intensity and long duration rainfalls, and periods II (June 2003 to November 2003) and IV (late May 2004 to December 2004) with high intensity and short duration rainfalls. Before the 2003 fire, the partial recovery of soil and vegetation from the previous burning in 1995 led to a diminution in the runoff rates (6.5 L m - 2 in burned plots and 1.8 L m - 2 in unburnt ones). Six months later (period II), runoff increased in one order of magnitude (23.9 L m - 2 in burnt plots and 1.1 L m - 2 in the unburnt ones) due, in part, to the short time elapsed from fire until high intensity rainfalls. These differences in runoff production were maintained during the whole post-fire period. Fire effects were reflected in the erosion rates. Soil losses prior to the 2003 fire, in both fire treatments and in the control one, were scant relative to post-fire levels. However, six months after the repeated

The Brazilian national system of forest permanent plots

Science.gov (United States)

Yeda Maria Malheiros de Oliveira; Maria Augusta Doetzer Rosot; Patricia Povoa de Mottos; Joberto Veloso de Freitas; Guilherme Luis Augusto Gomide; < i> et al< /i>

2009-01-01

The Brazilian National System of Forest Permanent Plots (SisPP) is a governmental initiative designed and being implemented in partnership by the Ministry of Environment (MMA), represented by the National Forest Programme (PNF) and the Brazilian Forest Service (SFB) and the Embrapa Forestry (a research center of the Brazilian Agricultural Research Corporation - Embrapa...

Generalized plotting facility

Energy Technology Data Exchange (ETDEWEB)

Burris, R.D.; Gray, W.H.

1978-01-01

A command which causes the translation of any supported graphics file format to a format acceptable to any supported device was implemented on two linked DECsystem-10s. The processing of the command is divided into parsing and translating phases. In the parsing phase, information is extracted from the command and augmented by default data. The results of this phase are saved on disk, and the appropriate translating routine is invoked. Twenty-eight translating programs were implemented in this system. They support four different graphics file formats, including the DISSPLA and Calcomp formats, and seven different types of plotters, including Tektronix, Calcomp, and Versatec devices. Some of the plotters are devices linked to the DECsystem-10s, and some are driven by IBM System/360 computers linked via a communications network to the DECsystem-10s. The user of this facility can use any of the supported packages to create a file of graphics data, preview the file on an on-line scope, and, when satisfied, cause the same data to be plotted on a hard-copy device. All of the actions utilize a single simple command format. 2 figures.

The isometric log-ratio (ilr)-ion plot: A proposed alternative to the Piper diagram

Science.gov (United States)

Shelton, Jenna L.; Engle, Mark A.; Buccianti, Antonella; Blondes, Madalyn S.

2018-01-01

The Piper diagram has been a staple for the analysis of water chemistry data since its introduction in 1944. It was conceived to be a method for water classification, determination of potential water mixing between end-members, and to aid in the identification of chemical reactions controlling a sample set. This study uses the information gleaned over the years since the release of the Piper diagram and proposes an alternative to it, capturing the strengths of the original diagram while adding new ideas to increase its robustness. The new method uses compositional data analysis to create 4 isometric log-ratio coordinates for the 6 major chemical species analyzed in the Piper diagram and transforms the data to a 4-field bi-plot, the ilr-ion plot. This ilr-ion plot conveys all of the information in the Piper diagram (water mixing, water types, and chemical reactions) while also visualizing additional data, the ability to examine Ca2+/Mg2+ versus Cl-/SO42−. The Piper and the ilr-ion plot were also compared using multiple synthetic and real datasets in order to illustrate the caveats and the advantages of using either diagram to analyze water chemistry data. Although there are challenges with using the ilr-ion plot (e.g., missing or zero values zeros in the dataset must be imputed by positive real numbers), it appears that the use of compositional data analysis coupled with the ilr-ion plot provides a more in-depth and complete analysis of water quality data compared to the original Piper diagram.

LAND SURVEY AND CADASTRAL MEASUREMENT MADE FOR AN PLOT PLAN COMPLEX

Directory of Open Access Journals (Sweden)

Madalina Marian

2012-12-01

Full Text Available According to Law no. 7/1996 of Cadastre and Real Estate Publicity, plan plot is a strip ground graphical representation containing strip ground limits and details of all the buildings that define stable land and cadastral division strip ground is technical administrative unit defined by fixed details, identifiable field that does not change over time, such as roads, water, dams, etc. This paper presents how to make a plot plan strip ground covering a 4 forest Ups (production unit and 108UAs (limits of forestry, land use is forest, pasture and village road. High surface is located extraurban limits Arefu in Arges County and has 28185443mp, that’ s equivalent to 2818,54ha. Forest cadastre specific limits are drawn in the work arrangement of forests and are represented by plot limit and the subparcels limit. This paper aims to presenting the main components of a modern surveying device used in our country, to carry out surveying works for forest cadastre. To use GPS technology (Global Position System in combination with the total station.

On the curvature of transmitted intensity plots in broad beam studies

International Nuclear Information System (INIS)

El-Kateb, A.H.

2000-01-01

Transmission of a broad beam of gamma rays of 81- and 356-keV energies from 133 Ba is studied singly and dually. This study is the first to deal with the curvatures of the intensity plots. The targets are dextrose solutions of percentage concentrations up to 0.125 and soil containing water with concentrations up to 0.319. The logarithmic intensity plots are expressed in terms of a polynomial in the concentration. The curvatures of the plots are measured and calculated on the basis of the theoretical mass attenuation coefficients. The results are discussed in conjunction with buildup factors and the probability of photoelectric and Compton interactions. The curvatures show maxima when incoherent interaction prevails. This is evidently proved in case of the single 356-keV and of the dual 81- and 356-keV applied energies. Comparison is performed between the measured and calculated curvatures. The concept of curvature is applied and discussed for published results of narrow beam geometry. Correspondingly, this is the first search to introduce curvature instead of buildup as a measure for transmitted collided photons

Calibration of multivariate scatter plots for exploratory analysis of relations within and between sets of variables in genomic research.

Science.gov (United States)

Graffelman, Jan; van Eeuwijk, Fred

2005-12-01

The scatter plot is a well known and easily applicable graphical tool to explore relationships between two quantitative variables. For the exploration of relations between multiple variables, generalisations of the scatter plot are useful. We present an overview of multivariate scatter plots focussing on the following situations. Firstly, we look at a scatter plot for portraying relations between quantitative variables within one data matrix. Secondly, we discuss a similar plot for the case of qualitative variables. Thirdly, we describe scatter plots for the relationships between two sets of variables where we focus on correlations. Finally, we treat plots of the relationships between multiple response and predictor variables, focussing on the matrix of regression coefficients. We will present both known and new results, where an important original contribution concerns a procedure for the inclusion of scales for the variables in multivariate scatter plots. We provide software for drawing such scales. We illustrate the construction and interpretation of the plots by means of examples on data collected in a genomic research program on taste in tomato.

The interpretation of quartz optically stimulated luminescence equivalent dose versus time plots

International Nuclear Information System (INIS)

Bailey, R.M.

2000-01-01

Numerical modelling has shown that the form of the quartz OSL shine plateau (hereafter 'D e (t)-plot') is influenced by the effects of phototransferred TL in the ∼110 deg. C region. It is suggested also that the presence of multiple OSL components (as described by Partial bleaching and the decay form characteristics of quartz OSL. Radiat. Meas., 27, 123-136. The form of the optically stimulated luminescence signal of quartz: implications of dating. Unpublished PhD thesis, University of London) affects the form of the D e (t)-plot. Laboratory measurements of a fully reset and artificially dosed sample yielded non-flat D e (t)-plots, the deviation being greater for the larger of the two simulated palaeodoses, in accordance with theoretical predictions. It is suggested that the so-called 'shine plateau' test is of limited use in assessing the bleaching history of quartz sediments

Android and iPhone Apps for Viewing Browse Plots from the Magnetospheric Imaging Instrument (MIMI) on Cassin

Science.gov (United States)

Vandegriff, J. D.; Kusterer, M. B.; Byun, S.; Steele, R. J.; Mitchell, D. G.

2017-12-01

We present a new mobile app for Android and an existing app for iPhone, both capable of viewing the numerous browse plots available for data collected by the MIMI suite on NASA's Cassini spacecraft. Both apps allow convenient mobile access to pre-made plots of data from various instruments on the suite, including daily, and monthly plots of particle intensities (line plots and spectrograms) from LEMMS, CHEMS and INCA. Also, the apps can show short movies made from sequences of INCA neutral atom images. Browsing the plots or movies is as simple as swiping to the left or right, and the app hides all access details needed to finding the images. Note that the app requires a data connection, since it locates and downloads the plot files live from various instrument team servers. We will demonstrate the current versions of both apps, which are available in Apple's App Store and the Google Play Store.

Graphical Data Analysis on the Circle: Wrap-Around Time Series Plots for (Interrupted) Time Series Designs.

Science.gov (United States)

Rodgers, Joseph Lee; Beasley, William Howard; Schuelke, Matthew

2014-01-01

Many data structures, particularly time series data, are naturally seasonal, cyclical, or otherwise circular. Past graphical methods for time series have focused on linear plots. In this article, we move graphical analysis onto the circle. We focus on 2 particular methods, one old and one new. Rose diagrams are circular histograms and can be produced in several different forms using the RRose software system. In addition, we propose, develop, illustrate, and provide software support for a new circular graphical method, called Wrap-Around Time Series Plots (WATS Plots), which is a graphical method useful to support time series analyses in general but in particular in relation to interrupted time series designs. We illustrate the use of WATS Plots with an interrupted time series design evaluating the effect of the Oklahoma City bombing on birthrates in Oklahoma County during the 10 years surrounding the bombing of the Murrah Building in Oklahoma City. We compare WATS Plots with linear time series representations and overlay them with smoothing and error bands. Each method is shown to have advantages in relation to the other; in our example, the WATS Plots more clearly show the existence and effect size of the fertility differential.

Optimal plot size in the evaluation of papaya scions: proposal and comparison of methods

Directory of Open Access Journals (Sweden)

Humberto Felipe Celanti

Full Text Available ABSTRACT Evaluating the quality of scions is extremely important and it can be done by characteristics of shoots and roots. This experiment evaluated height of the aerial part, stem diameter, number of leaves, petiole length and length of roots of papaya seedlings. Analyses were performed from a blank trial with 240 seedlings of "Golden Pecíolo Curto". The determination of the optimum plot size was done by applying the methods of maximum curvature, maximum curvature of coefficient of variation and a new proposed method, which incorporates the bootstrap resampling simulation to the maximum curvature method. According to the results obtained, five is the optimal number of seedlings of papaya "Golden Pecíolo Curto" per plot. The proposed method of bootstrap simulation with replacement provides optimal plot sizes equal or higher than the maximum curvature method and provides same plot size than maximum curvature method of the coefficient of variation.

Longitudinal strain bull's eye plot patterns in patients with cardiomyopathy and concentric left ventricular hypertrophy.

Science.gov (United States)

Liu, Dan; Hu, Kai; Nordbeck, Peter; Ertl, Georg; Störk, Stefan; Weidemann, Frank

2016-05-10

Despite substantial advances in the imaging techniques and pathophysiological understanding over the last decades, identification of the underlying causes of left ventricular hypertrophy by means of echocardiographic examination remains a challenge in current clinical practice. The longitudinal strain bull's eye plot derived from 2D speckle tracking imaging offers an intuitive visual overview of the global and regional left ventricular myocardial function in a single diagram. The bull's eye mapping is clinically feasible and the plot patterns could provide clues to the etiology of cardiomyopathies. The present review summarizes the longitudinal strain, bull's eye plot features in patients with various cardiomyopathies and concentric left ventricular hypertrophy and the bull's eye plot features might serve as one of the cardiac workup steps on evaluating patients with left ventricular hypertrophy.

Insights into gait disorders: walking variability using phase plot analysis, Huntington's disease.

Science.gov (United States)

Collett, Johnny; Esser, Patrick; Khalil, Hanan; Busse, Monica; Quinn, Lori; DeBono, Katy; Rosser, Anne; Nemeth, Andrea H; Dawes, Helen

2014-09-01

Huntington's disease (HD) is a progressive inherited neurodegenerative disorder. Identifying sensitive methodologies to quantitatively measure early motor changes have been difficult to develop. This exploratory observational study investigated gait variability and symmetry in HD using phase plot analysis. We measured the walking of 22 controls and 35 HD gene carriers (7 premanifest (PreHD)), 16 early/mid (HD1) and 12 late stage (HD2) in Oxford and Cardiff, UK. The unified Huntington's disease rating scale-total motor scores (UHDRS-TMS) and disease burden scores (DBS) were used to quantify disease severity. Data was collected during a clinical walk test (8.8 or 10 m) using an inertial measurement unit attached to the trunk. The 6 middle strides were used to calculate gait variability determined by spatiotemporal parameters (co-efficient of variation (CoV)) and phase plot analysis. Phase plots considered the variability in consecutive wave forms from vertical movement and were quantified by SDA (spatiotemporal variability), SDB (temporal variability), ratio ∀ (ratio SDA:SDB) and Δangleβ (symmetry). Step time CoV was greater in manifest HD (p0.05). Phase plot analysis identified differences between manifest HD and controls for SDB, Ratio ∀ and Δangle (all pplot analysis may be a sensitive method of detecting gait changes in HD and can be performed quickly during clinical walking tests. Copyright © 2014 Elsevier B.V. All rights reserved.

Increased control and data acquisition capabilities via microprocessor-based timed reading and time plot CAMAC modules

International Nuclear Information System (INIS)

Barsotti, E.J.; Purvis, D.M.; Loveless, R.L.; Hance, R.D.

1977-01-01

By implementing a microprocessor-based CAMAC module capable of being programmed to function as a time plot or a timed reading controller, the capabilities of the experimental area serial CAMAC control and data acquisition system at Fermilab have been extensively increased. These modules provide real-time data gathering and pre-processing functions synchronized to the main accelerator cycle clock while adding only a minimal amount to the host computer's CPU time and memory requirements. Critical data requiring a fast system response can be read by the host computer immediately following the request for this data. The vast majority of data, being non-critical, can be read via a block transfer during a non-busy time in the main accelerator cycle. Each of Fermilab's experimental areas, Meson, Neutrino and Proton, are controlled primarily by a Lockheed MAC-16 computer. Each of these three minicomputers is linked to a larger Digital Equipment Corporation PDP-11/50 computer. The PDP-11 computers are used primarily for data analysis and reduction. Presently two PDP-11's are linked to the three MAC-16 computers

Relative Efficiency of Split-plot Design (SPD) to Randomized ...

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

2013-06-01

Jun 1, 2013 ... West African Journal of Industrial and Academic Research Vol.7 No. 1 June .... effects. They concluded that the proposed efficiency measures provide feasible solutions for .... Fm = d.f for the whole-plot treatment; Fb= d.f for the ...

[Eugenics, an element of the literary plots of dystopia].

Science.gov (United States)

Baum, Ewa; Musielak, Michał

2007-01-01

The work presents the ideas and assumptions of eugenics, a social philosophy established in 1883 by Francis Galton, which affected the social policies of numerous European countries in the first half of the 20th century. The work shows the effect of eugenics on the literary standards of European prose in the previous century. Two outstanding dystopian novels of the 20th century, The Brave New World by Aldous Huxley and 1984 by George Orwell, situate eugenics as a permanent element of the literary plot of dystopia. Apart from the typical features of this type of novel, for example: personal narration with a trace of irony, a totalitarian state and Newspeak, eugenics is an important element of the literary plot with is aim to exclude and marginalise certain social groups. Eugenics is also one of the main social ideas criticised by both the writers.

Hard magnetic property and δM(H) plot for sintered NdFeB magnet

International Nuclear Information System (INIS)

Gao, R.W.; Zhang, D.H.; Li, W.; Li, X.M.; Zhang, J.C.

2000-01-01

The hard magnetic properties and the interactions between the grains for sintered Nd 16 Fe 73 Co 5 B 6 magnets are investigated by using δM(H) plot technique. The results show that the δM(H) plot of NdFeB sintered magnet can explain the effects of the microstructure (size, shape and orientation of the grains) and the intergrain interactions on the hard magnetic properties of the magnet. However, the value of δM(H) is positive when the applied field is not strong enough, which means that the common δM(H) plot theory is not completely consistent with the sintered NdFeB magnet

CPdock: the complementarity plot for docking of proteins: implementing multi-dielectric continuum electrostatics.

Science.gov (United States)

Basu, Sankar

2017-12-07

The complementarity plot (CP) is an established validation tool for protein structures, applicable to both globular proteins (folding) as well as protein-protein complexes (binding). It computes the shape and electrostatic complementarities (S m , E m ) for amino acid side-chains buried within the protein interior or interface and plots them in a two-dimensional plot having knowledge-based probabilistic quality estimates for the residues as well as for the whole structure. The current report essentially presents an upgraded version of the plot with the implementation of the advanced multi-dielectric functionality (as in Delphi version 6.2 or higher) in the computation of electrostatic complementarity to make the validation tool physico-chemically more realistic. The two methods (single- and multi-dielectric) agree decently in their resultant E m values, and hence, provisions for both methods have been kept in the software suite. So to speak, the global electrostatic balance within a well-folded protein and/or a well-packed interface seems only marginally perturbed by the choice of different internal dielectric values. However, both from theoretical as well as practical grounds, the more advanced multi-dielectric version of the plot is certainly recommended for potentially producing more reliable results. The report also presents a new methodology and a variant plot, namely CP dock , based on the same principles of complementarity specifically designed to be used in the docking of proteins. The efficacy of the method to discriminate between good and bad docked protein complexes has been tested on a recent state-of-the-art docking benchmark. The results unambiguously indicate that CP dock can indeed be effective in the initial screening phase of a docking scoring pipeline before going into more sophisticated and computationally expensive scoring functions. CP dock has been made available at https://github.com/nemo8130/CPdock . Graphical Abstract An example showing

Governing in the space of the "Seam" : Airport security after the liquid bomb plot

NARCIS (Netherlands)

Hoijtink, M.

This paper provides a detailed study of the liquid bomb plot from 2006, focusing on the ways in which the plot was constituted as “an event unlike others” (Adey, Anderson, and Lobo Guerrero 2011, 340). Engaging with a critical body of scholarship that examines how events are assembled and governed

The pros and cons of funnel plots as an aid to risk communication and patient decision making.

Science.gov (United States)

Rakow, Tim; Wright, Rebecca J; Spiegelhalter, David J; Bull, Catherine

2015-05-01

Funnel plots, which simultaneously display a sample statistic and the corresponding sample size for multiple cases, have a range of applications. In medicine, they are used to display treatment outcome rates and caseload volume by institution, which can inform strategic decisions about health care delivery. We investigated lay people's understanding of such plots and explored their suitability as an aid to individual treatment decisions. In two studies, 172 participants answered objective questions about funnel plots representing the surgical outcomes (survival or mortality rates) of institutions varying in caseload, and indicated their preferred institutions. Accuracy for extracting objective information was high, unless question phrasing was inconsistent with the plot's survival/mortality framing, or participants had low numeracy levels. Participants integrated caseload-volume and outcome-rate data when forming preferences, but were influenced by reference lines on the plot to make inappropriate discriminations between institutions with similar outcome rates. With careful choice of accompanying language, funnel plots can be readily understood and are therefore a useful tool for communicating risk. However, they are less effective as a decision aid for individual patient's treatment decisions, and we recommend refinements to the standard presentation of the plots if they are to be used for that purpose. © 2014 The British Psychological Society.

Poincaré plot analysis of autocorrelation function of RR intervals in patients with acute myocardial infarction.

Science.gov (United States)

Chuang, Shin-Shin; Wu, Kung-Tai; Lin, Chen-Yang; Lee, Steven; Chen, Gau-Yang; Kuo, Cheng-Deng

2014-08-01

The Poincaré plot of RR intervals (RRI) is obtained by plotting RRIn+1 against RRIn. The Pearson correlation coefficient (ρRRI), slope (SRRI), Y-intercept (YRRI), standard deviation of instantaneous beat-to-beat RRI variability (SD1RR), and standard deviation of continuous long-term RRI variability (SD2RR) can be defined to characterize the plot. Similarly, the Poincaré plot of autocorrelation function (ACF) of RRI can be obtained by plotting ACFk+1 against ACFk. The corresponding Pearson correlation coefficient (ρACF), slope (SACF), Y-intercept (YACF), SD1ACF, and SD2ACF can be defined similarly to characterize the plot. By comparing the indices of Poincaré plots of RRI and ACF between patients with acute myocardial infarction (AMI) and patients with patent coronary artery (PCA), we found that the ρACF and SACF were significantly larger, whereas the RMSSDACF/SDACF and SD1ACF/SD2ACF were significantly smaller in AMI patients. The ρACF and SACF correlated significantly and negatively with normalized high-frequency power (nHFP), and significantly and positively with normalized very low-frequency power (nVLFP) of heart rate variability in both groups of patients. On the contrary, the RMSSDACF/SDACF and SD1ACF/SD2ACF correlated significantly and positively with nHFP, and significantly and negatively with nVLFP and low-/high-frequency power ratio (LHR) in both groups of patients. We concluded that the ρACF, SACF, RMSSDACF/SDACF, and SD1ACF/SD2ACF, among many other indices of ACF Poincaré plot, can be used to differentiate between patients with AMI and patients with PCA, and that the increase in ρACF and SACF and the decrease in RMSSDACF/SDACF and SD1ACF/SD2ACF suggest an increased sympathetic and decreased vagal modulations in both groups of patients.

Designing fractional factorial split-plot experiments using integer programming

DEFF Research Database (Denmark)

Capehart, Shay R.; Keha, Ahmet; Kulahci, Murat

2011-01-01

factorial (FF) design, with the restricted randomisation structure to account for the whole plots and subplots. We discuss the formulation of FFSP designs using integer programming (IP) to achieve various design criteria. We specifically look at the maximum number of clear two-factor interactions...

Soil Characteristics, Microbial Compostion of Plot, Leaf Count and ...

African Journals Online (AJOL)

Soil Characteristics, Microbial Compostion of Plot, Leaf Count and Sprout Studies of Cocoyam ( Colocasia [Schott] and Xanthosoma [Schott], Araceae) Collected in Edo State, ... Science, Technology and Arts Research Journal ... Government Areas (LGA) in Edo state and describe them based on leaf count and sprout

Macroecology of Australian Tall Eucalypt Forests: Baseline Data from a Continental-Scale Permanent Plot Network

Science.gov (United States)

Wood, Sam W.; Prior, Lynda D.; Stephens, Helen C.; Bowman, David M. J. S.

2015-01-01

Tracking the response of forest ecosystems to climate change demands large (≥1 ha) monitoring plots that are repeatedly measured over long time frames and arranged across macro-ecological gradients. Continental scale networks of permanent forest plots have identified links between climate and carbon fluxes by monitoring trends in tree growth, mortality and recruitment. The relationship between tree growth and climate in Australia has been recently articulated through analysis of data from smaller forest plots, but conclusions were limited by (a) absence of data on recruitment and mortality, (b) exclusion of non-eucalypt species, and (c) lack of knowledge of stand age or disturbance histories. To remedy these gaps we established the Ausplots Forest Monitoring Network: a continental scale network of 48 1 ha permanent plots in highly productive tall eucalypt forests in the mature growth stage. These plots are distributed across cool temperate, Mediterranean, subtropical and tropical climates (mean annual precipitation 850 to 1900 mm per year; mean annual temperature 6 to 21°C). Aboveground carbon stocks (AGC) in these forests are dominated by eucalypts (90% of AGC) whilst non-eucalypts in the understorey dominated species diversity and tree abundance (84% of species; 60% of stems). Aboveground carbon stocks were negatively related to mean annual temperature, with forests at the warm end of the temperature range storing approximately half the amount of carbon as forests at the cool end of the temperature range. This may reflect thermal constraints on tree growth detected through other plot networks and physiological studies. Through common protocols and careful sampling design, the Ausplots Forest Monitoring Network will facilitate the integration of tall eucalypt forests into established global forest monitoring initiatives. In the context of projections of rapidly warming and drying climates in Australia, this plot network will enable detection of links between

Comparative evolutionary diversity and phylogenetic structure across multiple forest dynamics plots: a mega-phylogeny approach

Directory of Open Access Journals (Sweden)

David Lee Erickson

2014-11-01

Full Text Available Forest dynamics plots, which now span longitudes, latitudes, and habitat types across the globe, offer unparalleled insights into the ecological and evolutionary processes that determine how species are assembled into communities. Understanding phylogenetic relationships among species in a community has become an important component of assessing assembly processes. However, the application of evolutionary information to questions in community ecology has been limited in large part by the lack of accurate estimates of phylogenetic relationships among individual species found within communities, and is particularly limiting in comparisons between communities. Therefore, streamlining and maximizing the information content of these community phylogenies is a priority. To test the viability and advantage of a multi-community phylogeny, we constructed a multi-plot mega-phylogeny of 1,347 species of trees across 15 forest dynamics plots in the ForestGEO network using DNA barcode sequence data (rbcL, matK and psbA-trnH and compared community phylogenies for each individual plot with respect to support for topology and branch lengths, which affect evolutionary inference of community processes. The levels of taxonomic differentiation across the phylogeny were examined by quantifying the frequency of resolved nodes throughout. In addition, three phylogenetic distance metrics that are commonly used to infer assembly processes were estimated for each plot (Phylogenetic Distance [PD], Mean Phylogenetic Distance [MPD], and Mean Nearest Taxon Distance [MNTD]. Lastly, we examine the partitioning of phylogenetic diversity among community plots through quantification of inter-community MPD and MNTD. Overall, evolutionary relationships were highly resolved across the DNA barcode-based mega-phylogeny, and phylogenetic resolution for each community plot was improved when estimated within the context of the mega-phylogeny. Likewise, when compared with phylogenies for

A new graphic plot analysis for determination of neuroreceptor binding in positron emission tomography studies.

Science.gov (United States)

Ito, Hiroshi; Yokoi, Takashi; Ikoma, Yoko; Shidahara, Miho; Seki, Chie; Naganawa, Mika; Takahashi, Hidehiko; Takano, Harumasa; Kimura, Yuichi; Ichise, Masanori; Suhara, Tetsuya

2010-01-01

In positron emission tomography (PET) studies with radioligands for neuroreceptors, tracer kinetics have been described by the standard two-tissue compartment model that includes the compartments of nondisplaceable binding and specific binding to receptors. In the present study, we have developed a new graphic plot analysis to determine the total distribution volume (V(T)) and nondisplaceable distribution volume (V(ND)) independently, and therefore the binding potential (BP(ND)). In this plot, Y(t) is the ratio of brain tissue activity to time-integrated arterial input function, and X(t) is the ratio of time-integrated brain tissue activity to time-integrated arterial input function. The x-intercept of linear regression of the plots for early phase represents V(ND), and the x-intercept of linear regression of the plots for delayed phase after the equilibrium time represents V(T). BP(ND) can be calculated by BP(ND)=V(T)/V(ND)-1. Dynamic PET scanning with measurement of arterial input function was performed on six healthy men after intravenous rapid bolus injection of [(11)C]FLB457. The plot yielded a curve in regions with specific binding while it yielded a straight line through all plot data in regions with no specific binding. V(ND), V(T), and BP(ND) values calculated by the present method were in good agreement with those by conventional non-linear least-squares fitting procedure. This method can be used to distinguish graphically whether the radioligand binding includes specific binding or not.

Analysis and Visualization of ChIP-Seq and RNA-Seq Sequence Alignments Using ngs.plot.

Science.gov (United States)

Loh, Yong-Hwee Eddie; Shen, Li

2016-01-01

The continual maturation and increasing applications of next-generation sequencing technology in scientific research have yielded ever-increasing amounts of data that need to be effectively and efficiently analyzed and innovatively mined for new biological insights. We have developed ngs.plot-a quick and easy-to-use bioinformatics tool that performs visualizations of the spatial relationships between sequencing alignment enrichment and specific genomic features or regions. More importantly, ngs.plot is customizable beyond the use of standard genomic feature databases to allow the analysis and visualization of user-specified regions of interest generated by the user's own hypotheses. In this protocol, we demonstrate and explain the use of ngs.plot using command line executions, as well as a web-based workflow on the Galaxy framework. We replicate the underlying commands used in the analysis of a true biological dataset that we had reported and published earlier and demonstrate how ngs.plot can easily generate publication-ready figures. With ngs.plot, users would be able to efficiently and innovatively mine their own datasets without having to be involved in the technical aspects of sequence coverage calculations and genomic databases.

EVALPLOT2007, ENDF Plots Cross Section, Angular Distribution and Energy Distribution

International Nuclear Information System (INIS)

2007-01-01

1 - Description of program or function: EVALPLOT is designed to plot evaluated cross sections in the ENDF/B format. The program plots cross sections, angular distributions, energy distributions and other parameters. IAEA1322/16: This version include the updates up to January 30, 2007. Changes in ENDF/B-VII Format and procedures, as well as the evaluations themselves, make it impossible for versions of the ENDF/B pre-processing codes earlier than PREPRO 2007 (2007 Version) to accurately process current ENDF/B-VII evaluations. The present code can handle all existing ENDF/B-VI evaluations through release 8, which will be the last release of ENDF/B-VI. Modifications from previous versions: Evalplot Vers. 2007-1 (Jan. 2007): - checked against all ENDF/B-VII; - increased page size from 600,000 to 2,400,000; - increased the number of energies vs. legendre coefficients from 20,000 to 80,000 (must be 1/30 page size); - added (n,remainder) to first plot. 2 - Method of solution: In the case of processing neutron and photon cross sections (MF=3 or 23) and parameters (MF=1 or 27), all data in a file (MF) is read, grouped together by type, and plotted. All reactions of a data type appear on the same plot. The data types for MF=1 and 3 (neutrons) are: (1) total, elastic, capture, fission and total inelastic; (2) (n,2n), (n,3n) and (n,n' charged particle); (3) (n,charged particle); (4) particle production (proton, deuteron, etc.) and damage; (5) total, first, second, etc. chance fission; (6) total inelastic, inelastic discrete levels and continuum; (7) (n,p) total and levels (only if levels are given); (8) (n,d) total and levels (only if levels are given); (9) (n,t) total and levels (only if levels are given); (10) (n, 3 He) total and levels (only if levels are given); (11) (n, 4 He) total and levels (only if levels are given); (12) parameters mu-bar, xi and gamma; (13) nu-bar - total, prompt an delayed. The data types for MF=23 and 27 (photons) are: (14) total, coherent

Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia

OpenAIRE

Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

2015-01-01

Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in se...

General vibration monitoring: Experimental hall

International Nuclear Information System (INIS)

Jendrzejczyk, J.A.; Wambsganss, M.W.; Smith, R.K.

1993-01-01

The reported vibration data were generated from measurements made on the experimental hall floor on December 2, 1992. At the time of the measurements, the ESRF hydrolevel was set-up in the Early Assembly Area (EAA) of the experimental hall and was being used to measure static displacement (settlement) of the floor. The vibration measurement area was on and adjacent to the EAA, in the vicinity of the ESRF hydrolevel test which was in progress. This report summarizes the objectives, instrumentation, measurement locations, observations, and conclusions, and provides selected results in the form of RMS vs. time plots, and power spectral densities from which frequency information can be derived. Measured response amplitudes were within the vibration criteria established for the APS

SCALPLO - a universal program for plotting flux output from SCALE modules and related programs. User`s manual

Energy Technology Data Exchange (ETDEWEB)

Hersman, A; Leege, P F.A. de; Hoogenboom, J E

1992-04-01

The FORTRAN-77 program SCALPLO is being developed to make an easy and quick graphic survey of flux and/or power data calculated with SCALE modules or other core calculation or shielding codes. The basic plot functions it can perform are one- and two-dimensional plots of flux or power distributions and flux energy spectra. More specifically it can produce plots of the flux distribution in a one-dimensional geometry for one or more energy groups in one figure. It can also plot the flux distribution along a cut through a two- or three-dimensional geometry along one of the coordinate axes and it can plot a two-dimensional view of the flux distribution of a two-dimensional geometry or of a plane cut through a three-dimensional geometry. The same can be done for the power distribution in a system. Furthermore SCALPLO can plot the particle flux spectrum as a function of energy, either as group fluxes or as group fluxes per unit energy or per unit lethargy. (orig./HP).

Using recurrence plot analysis for software execution interpretation and fault detection

Science.gov (United States)

Mosdorf, M.

2015-09-01

This paper shows a method targeted at software execution interpretation and fault detection using recurrence plot analysis. In in the proposed approach recurrence plot analysis is applied to software execution trace that contains executed assembly instructions. Results of this analysis are subject to further processing with PCA (Principal Component Analysis) method that simplifies number coefficients used for software execution classification. This method was used for the analysis of five algorithms: Bubble Sort, Quick Sort, Median Filter, FIR, SHA-1. Results show that some of the collected traces could be easily assigned to particular algorithms (logs from Bubble Sort and FIR algorithms) while others are more difficult to distinguish.

VISUAL: a software package for plotting data in the RADHEAT-V4 code system

International Nuclear Information System (INIS)

Sasaki, Toshihiko; Yamano, Naoki

1984-03-01

In this report, the features, the capabilities and the constitution of the VISUAL Software Package are presented. The one of the features is that the VISUAL provides a versatile graphic display tool to plot a wide variety of data of the RADHEAT-V4 code system. And the other is to enable a user to handle easily the executing data in the Conversational Management Mode named ''CMM''. The program adopts the adjustable dimension system to increase its flexibility. VISUAL generates two-dimensional drawing, contour line map and three dimensional drawing on TSS (Time Sharing System) digital graphic equipment, NLP (Nihongo Laser Printer) or COM(Computer Output Microfilm). It is easily possible to display the calculated and experimental data in a DATA-POOL by using these functions. The purpose of this report is to describe sufficient information to enable a user to use VISUAL profitabily. (author)

Measurement of the ω→π+π−π0 Dalitz plot distribution

Directory of Open Access Journals (Sweden)

P. Adlarson

2017-07-01

Full Text Available Using the production reactions pd→He3ω and pp→ppω, the Dalitz plot distribution for the ω→π+π−π0 decay is studied with the WASA detector at COSY, based on a combined data sample of (4.408±0.042×104 events. The Dalitz plot density is parametrised by a product of the P-wave phase space and a polynomial expansion in the normalised polar Dalitz plot variables Z and ϕ. For the first time, a deviation from pure P-wave phase space is observed with a significance of 4.1σ. The deviation is parametrised by a linear term 1+2αZ, with α determined to be +0.147±0.036, consistent with the expectations of ρ-meson-type final-state interactions of the P-wave pion pairs.

Dispersion-theoretical analysis of the D + → K - π + π + Dalitz plot

Science.gov (United States)

Niecknig, Franz; Kubis, Bastian

2015-10-01

We study the Dalitz plot of the Cabibbo-favored charmed-meson decay D + → K -π+π+ using dispersion theory. The formalism respects all constraints from analyticity and unitarity, and consistently describes final-state interactions between all three decay products. We employ pion-pion and pion-kaon phase shifts as input, and fit the pertinent subtraction constants to Dalitz plot data by the CLEO and FOCUS collaborations. Phase motions of resonant as well as nonresonant amplitudes are discussed, which should provide crucial input for future studies of CP violation in similar three-body charm decays.

An automatized frequency analysis for vine plot detection and delineation in remote sensing

OpenAIRE

Delenne , Carole; Rabatel , G.; Deshayes , M.

2008-01-01

The availability of an automatic tool for vine plot detection, delineation, and characterization would be very useful for management purposes. An automatic and recursive process using frequency analysis (with Fourier transform and Gabor filters) has been developed to meet this need. This results in the determination of vine plot boundary and accurate estimation of interrow width and row orientation. To foster large-scale applications, tests and validation have been carried out on standard ver...

The importance of plot size and the number of sampling seasons on capturing macrofungal species richness.

Science.gov (United States)

Li, Huili; Ostermann, Anne; Karunarathna, Samantha C; Xu, Jianchu; Hyde, Kevin D; Mortimer, Peter E

2018-07-01

The species-area relationship is an important factor in the study of species diversity, conservation biology, and landscape ecology. A deeper understanding of this relationship is necessary, in order to provide recommendations on how to improve the quality of data collection on macrofungal diversity in different land use systems in future studies, a systematic assessment of methodological parameters, in particular optimal plot sizes. The species-area relationship of macrofungi in tropical and temperate climatic zones and four different land use systems were investigated by determining the macrofungal species richness in plot sizes ranging from 100 m 2 to 10 000 m 2 over two sampling seasons. We found that the effect of plot size on recorded species richness significantly differed between land use systems with the exception of monoculture systems. For both climate zones, land use system needs to be considered when determining optimal plot size. Using an optimal plot size was more important than temporal replication (over two sampling seasons) in accurately recording species richness. Copyright © 2018 British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Experimental and computational analysis of the hot water layer for the radiological protection in swimming pool reactor

International Nuclear Information System (INIS)

Ribeiro, Rogerio.

1995-01-01

Pool reactors are research reactors, which allow easy access to the core and rare simple to operate. Reactors of this kind operating at power levels higher than about one megawatt need a hot water layer at the surface of the pool, in order to keep surface activity below acceptable levels and enable free access to the upper part of the reactor. An experimental apparatus was constructed to study the hot water layer stability. Thermocouples were used to measure the temperature field. A numerical analysis was conducted simultaneously. Regarding experimental results, representative temperature contour lines of the hot water layer were plotted. The temperature field was determined in the numerical analysis and temperature contour lines corresponding to those of the experimental results were plotted. The hot water layer kept stable for experimental and numerical results. Good agreement between the results for the hot water layer position and thickness has been obtained. (author). 21 refs., 40 figs., 15 tabs

Selecting the optimum plot size for a California design-based stream and wetland mapping program.

Science.gov (United States)

Lackey, Leila G; Stein, Eric D

2014-04-01

Accurate estimates of the extent and distribution of wetlands and streams are the foundation of wetland monitoring, management, restoration, and regulatory programs. Traditionally, these estimates have relied on comprehensive mapping. However, this approach is prohibitively resource-intensive over large areas, making it both impractical and statistically unreliable. Probabilistic (design-based) approaches to evaluating status and trends provide a more cost-effective alternative because, compared with comprehensive mapping, overall extent is inferred from mapping a statistically representative, randomly selected subset of the target area. In this type of design, the size of sample plots has a significant impact on program costs and on statistical precision and accuracy; however, no consensus exists on the appropriate plot size for remote monitoring of stream and wetland extent. This study utilized simulated sampling to assess the performance of four plot sizes (1, 4, 9, and 16 km(2)) for three geographic regions of California. Simulation results showed smaller plot sizes (1 and 4 km(2)) were most efficient for achieving desired levels of statistical accuracy and precision. However, larger plot sizes were more likely to contain rare and spatially limited wetland subtypes. Balancing these considerations led to selection of 4 km(2) for the California status and trends program.

Poincaré plot indexes of heart rate variability detect dynamic autonomic modulation during general anesthesia induction.

Science.gov (United States)

Hsu, Che-Hao; Tsai, Ming-Ya; Huang, Go-Shine; Lin, Tso-Chou; Chen, Kuen-Pao; Ho, Shung-Tai; Shyu, Liang-Yu; Li, Chi-Yuan

2012-03-01

Beat-to-beat heart rate variability (HRV) is caused by the fluctuating balance of sympathetic and parasympathetic tone. The Poincaré plot has been used to evaluate HRV. In this study, we validate that this new method may qualitatively and quantitatively assess the sympathovagal fluctuation in patients during induction of anesthesia with sevoflurane. Twenty-eight young patients were allocated for the study. The patients received a tilt test and on the next day they sustained anesthesia induced with inhaled anesthetics. Electrocardiography signals from the patients were relayed to an analogue-digital converter. The Poincaré plot is quantified by measuring SD1, SD2, and SD1/SD2. Power spectral analyses were performed and LF, HF and HF/LF were calculated. The LF power and the SD2 of the Poincaré plot increased while subjects were tilt-up from the supine position. Additionally, a significant correlation were found between LF and SD2, HF and SD1 (p plot respectively. However, the LF, SD2 and LF/HF increased; the HF, SD1 and SD1/SD2 ratio decreased after intubation stimulation. Poincaré plot and power spectral analysis of HRV during tilt test and sevoflurane induction significantly correlate. Poincaré plot analysis is easier and more sensitive at evaluating the sympathovagal balance and observing the beat-to-beat HRV. Copyright © 2012. Published by Elsevier B.V.

The impact of distance to the farm compound on the options for use of the cereal plot

Directory of Open Access Journals (Sweden)

K. TAMM

2008-12-01

Full Text Available In increasingly competitive conditions, the dominant trend of enlarging the production area of farms is causing a growth in transportation costs making the profitability of cultivating distant plots questionable. The aim of this study was to provide a method to evaluate the rationality of using a plot depending on its distance, area and cultivation technology. An algorithm and a mathematical model were composed to calculate the total costs depending on the distance to the plot. The transportation costs of machines and materials, cost of organisational travel and timeliness costs are taken into account in the model to enable determination of the maximum distance or the minimum area of the plot necessary for profitable cultivation. Simulations allow us to conclude that the growth in yield and selling price of the production allow an increase in the limit value of driving costs and, thus, the profitable distance of the plot; on the other hand, it means also an increase of timeliness costs as a limitation for extending distance. Exploitation of more distant plots can be uneconomical in coming years because of increasing fuel costs.;

Set-up and calibration of an outdoor nozzle-type rainfall simulator for soil erosion studies at the Masse experimental station (central Italy)

Science.gov (United States)

Vergni, Lorenzo; Todisco, Francesca

2016-04-01

This contribution describes the technical characteristics and the preliminary calibration of a rainfall simulator recently installed by the Department of Agricultural, Food and Environmental Sciences (Perugia University) at the Masse experimental station located 20 km south of Perugia, in the region of Umbria (central Italy). The site includes some USLE plots of different length λ = 11 and 22 m and width w = 2, 4 and 8 m, oriented parallel to a 16 % slope and kept free of vegetation by frequent ploughing. Since 2008, the station enabled to collect data from more than 80 erosive events, that were mainly used to investigate the relationship between rainfall characteristics and soil loss. The relevant soil loss variability that characterizes erosive storm events with similar overall characteristics (duration and/or depth) can be explained by the different rainfall profile of erosive storms and by the different antecedent soil aggregate stability. To analyse in more detail these aspects, recently, the Masse experimental station has been equipped with a semi-portable rainfall simulator placed over two micro-plots of 1x1 m each, having the same topographic and pedologic conditions of the adjacent USLE plots. The rainfall simulator consists of four full-cone spray nozzles for each micro-plot, placed at the angles of a 0.18-m square, centred over the plot at a height of 2.7 m above the ground. The operating pressure is regulated by pressure regulating valves and checked by pressure gauges mounted in correspondence of each nozzle. An electronic control unit regulates the start and stop of the inlet solenoid valves. A range of rainfall intensities can be achieved, by activating different combinations of nozzles (15 different intensities) also during the same simulation trial. The particular design of the plots allows to collect separately the runoff volume deriving from the plots and the water volume fallen outside of the plot. In this way it is possible to derive, by

Experimentally reducing species abundance indirectly affects food web structure and robustness.

Science.gov (United States)

Barbosa, Milton; Fernandes, G Wilson; Lewis, Owen T; Morris, Rebecca J

2017-03-01

Studies on the robustness of ecological communities suggest that the loss or reduction in abundance of individual species can lead to secondary and cascading extinctions. However, most such studies have been simulation-based analyses of the effect of primary extinction on food web structure. In a field experiment we tested the direct and indirect effects of reducing the abundance of a common species, focusing on the diverse and self-contained assemblage of arthropods associated with an abundant Brazilian shrub, Baccharis dracunculifolia D.C. (Asteraceae). Over a 5-month period we experimentally reduced the abundance of Baccharopelma dracunculifoliae (Sternorrhyncha: Psyllidae), the commonest galling species associated with B. dracunculifolia, in 15 replicate plots paired with 15 control plots. We investigated direct effects of the manipulation on parasitoids attacking B. dracunculifoliae, as well as indirect effects (mediated via a third species or through the environment) on 10 other galler species and 50 associated parasitoid species. The experimental manipulation significantly increased parasitism on B. dracunculifoliae in the treatment plots, but did not significantly alter either the species richness or abundance of other galler species. Compared to control plots, food webs in manipulated plots had significantly lower values of weighted connectance, interaction evenness and robustness (measured as simulated tolerance to secondary extinction), even when B. dracunculifoliae was excluded from calculations. Parasitoid species were almost entirely specialized to individual galler species, so the observed effects of the manipulation on food web structure could not have propagated via the documented trophic links. Instead, they must have spread either through trophic links not included in the webs (e.g. shared predators) or non-trophically (e.g. through changes in habitat availability). Our results highlight that the inclusion of both trophic and non

Emotions induced by operatic music: psychophysiological effects of music, plot, and acting: a scientist's tribute to Maria Callas.

Science.gov (United States)

Balteş, Felicia Rodica; Avram, Julia; Miclea, Mircea; Miu, Andrei C

2011-06-01

Operatic music involves both singing and acting (as well as rich audiovisual background arising from the orchestra and elaborate scenery and costumes) that multiply the mechanisms by which emotions are induced in listeners. The present study investigated the effects of music, plot, and acting performance on emotions induced by opera. There were three experimental conditions: (1) participants listened to a musically complex and dramatically coherent excerpt from Tosca; (2) they read a summary of the plot and listened to the same musical excerpt again; and (3) they re-listened to music while they watched the subtitled film of this acting performance. In addition, a control condition was included, in which an independent sample of participants succesively listened three times to the same musical excerpt. We measured subjective changes using both dimensional, and specific music-induced emotion questionnaires. Cardiovascular, electrodermal, and respiratory responses were also recorded, and the participants kept track of their musical chills. Music listening alone elicited positive emotion and autonomic arousal, seen in faster heart rate, but slower respiration rate and reduced skin conductance. Knowing the (sad) plot while listening to the music a second time reduced positive emotions (peacefulness, joyful activation), and increased negative ones (sadness), while high autonomic arousal was maintained. Watching the acting performance increased emotional arousal and changed its valence again (from less positive/sad to transcendent), in the context of continued high autonomic arousal. The repeated exposure to music did not by itself induce this pattern of modifications. These results indicate that the multiple musical and dramatic means involved in operatic performance specifically contribute to the genesis of music-induced emotions and their physiological correlates. Copyright © 2011 Elsevier Inc. All rights reserved.

Using contour plots in elecgroproduction to examine regions in {epsilon}, Q{sup 2}, W space

Energy Technology Data Exchange (ETDEWEB)

Funsten, H. [College of William and Mary, Williamsburg, VA (United States)

1994-04-01

In determining incident CEBAF beam energies for CLAS electroproduction experiments that separate the longitudinal and transverse cross section components, contour plots of {epsilon} defined over a 2 dimensional Q{sup 2}, W space can be useful. This note describes an approximate method of constructing such plots.

The Wally plot approach to assess the calibration of clinical prediction models.

Science.gov (United States)

Blanche, Paul; Gerds, Thomas A; Ekstrøm, Claus T

2017-12-06

A prediction model is calibrated if, roughly, for any percentage x we can expect that x subjects out of 100 experience the event among all subjects that have a predicted risk of x%. Typically, the calibration assumption is assessed graphically but in practice it is often challenging to judge whether a "disappointing" calibration plot is the consequence of a departure from the calibration assumption, or alternatively just "bad luck" due to sampling variability. We propose a graphical approach which enables the visualization of how much a calibration plot agrees with the calibration assumption to address this issue. The approach is mainly based on the idea of generating new plots which mimic the available data under the calibration assumption. The method handles the common non-trivial situations in which the data contain censored observations and occurrences of competing events. This is done by building on ideas from constrained non-parametric maximum likelihood estimation methods. Two examples from large cohort data illustrate our proposal. The 'wally' R package is provided to make the methodology easily usable.

Texture Analysis of Recurrence Plots Based on Wavelets and PSO for Laryngeal Pathologies Detection.

Science.gov (United States)

Souza, Taciana A; Vieira, Vinícius J D; Correia, Suzete E N; Costa, Silvana L N C; de A Costa, Washington C; Souza, Micael A

2015-01-01

This paper deals with the discrimination between healthy and pathological speech signals using recurrence plots and wavelet transform with texture features. Approximation and detail coefficients are obtained from the recurrence plots using Haar wavelet transform, considering one decomposition level. The considered laryngeal pathologies are: paralysis, Reinke's edema and nodules. Accuracy rates above 86% were obtained by means of the employed method.

Review article: The mountain motif in the plot of Matthew

Directory of Open Access Journals (Sweden)

Gert J. Volschenk

2010-09-01

Full Text Available This article reviewed T.L. Donaldson’s book, Jesus on the mountain: A study in Matthean theology, published in 1985 by JSOT Press, Sheffield, and focused on the mountain motif in the structure and plot of the Gospel of Matthew, in addition to the work of Donaldson on the mountain motif as a literary motif and as theological symbol. The mountain is a primary theological setting for Jesus’ ministry and thus is an important setting, serving as one of the literary devices by which Matthew structured and progressed his narrative. The Zion theological and eschatological significance and Second Temple Judaism serve as the historical and theological background for the mountain motif. The last mountain setting (Mt 28:16–20 is the culmination of the three theological themes in the plot of Matthew, namely Christology, ecclesiology and salvation history.

Common angle plots as perception-true visualizations of categorical associations.

Science.gov (United States)

Hofmann, Heike; Vendettuoli, Marie

2013-12-01

Visualizations are great tools of communications-they summarize findings and quickly convey main messages to our audience. As designers of charts we have to make sure that information is shown with a minimum of distortion. We have to also consider illusions and other perceptual limitations of our audience. In this paper we discuss the effect and strength of the line width illusion, a Muller-Lyer type illusion, on designs related to displaying associations between categorical variables. Parallel sets and hammock plots are both affected by line width illusions. We introduce the common-angle plot as an alternative method for displaying categorical data in a manner that minimizes the effect from perceptual illusions. Results from user studies both highlight the need for addressing line-width illusions in displays and provide evidence that common angle charts successfully resolve this issue.

PLOTnFIT: A BASIC program for data plotting and curve fitting

Energy Technology Data Exchange (ETDEWEB)

Schiffgens, J O

1989-10-01

PLOTnFIT is a BASIC program to be used with an IBM or IBM-compatible personal computer (PC) for plotting and fitting curves to measured or observed data for both extrapolation and interpolation. It uses the Least Squares method to calculate the coefficients of nth degree polynomials (e.g., up to 10th degree) of Basis Functions so that each polynomial fits the data in a Least Squares sense, then plots the data and the polynomial that a user decides best represents them. PLOTnFIT is very versatile. It can be used to generate linear, semilog, and log-log graphs and can automatically scale the coordinate axes to suit the data. It can plot more than one data set on a graph (e.g., up to 8 data sets) and more data points than a user is likely to put on one graph (e.g., up to 225 points). A PC diskette containing (1) READIST.PNF (a summary of this NUREG), (2) INI06891.SIS and FOL06891.SIS (two data files), and 3) PLOTNFIT.4TH (the latest version of the program) may be obtained from the National Energy Software Center, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439. (author)

Omitted Variable Sensitivity Analysis with the Annotated Love Plot

Science.gov (United States)

Hansen, Ben B.; Fredrickson, Mark M.

2014-01-01

The goal of this research is to make sensitivity analysis accessible not only to empirical researchers but also to the various stakeholders for whom educational evaluations are conducted. To do this it derives anchors for the omitted variable (OV)-program participation association intrinsically, using the Love plot to present a wide range of…

Analysis of shallow water experimental acoustic data including normal mode model comparisons

NARCIS (Netherlands)

McHugh, R.; Simons, D.G.

2000-01-01

Ss part of a propagation model validation exercise experimental acoustic and oceanographic data was collected from a shallow-water, long-range channel, off the west coast of Scotland. Temporal variability effects in this channel were assessed through visual inspection of stacked plots, each of which

Direct fabrication of high-resolution three-dimensional polymeric scaffolds using electrohydrodynamic hot jet plotting

International Nuclear Information System (INIS)

Wei, Chuang; Dong, Jingyan

2013-01-01

This paper presents the direct three-dimensional (3D) fabrication of polymer scaffolds with sub-10 µm structures using electrohydrodynamic jet (EHD-jet) plotting of melted thermoplastic polymers. Traditional extrusion-based fabrication approaches of 3D periodic porous structures are very limited in their resolution, due to the excessive pressure requirement for extruding highly viscous thermoplastic polymers. EHD-jet printing has become a high-resolution alternative to other forms of nozzle deposition-based fabrication approaches by generating micro-scale liquid droplets or a fine jet through the application of a large electrical voltage between the nozzle and the substrate. In this study, we successfully apply EHD-jet plotting technology with melted biodegradable polymer (polycaprolactone, or PCL) for the fabrication of 2D patterns and 3D periodic porous scaffold structures in potential tissue engineering applications. Process conditions (e.g. electrical voltage, pressure, plotting speed) have been thoroughly investigated to achieve reliable jet printing of fine filaments. We have demonstrated for the first time that the EHD-jet plotting process is capable of the fabrication of 3D periodic structures with sub-10 µm resolution, which has great potential in advanced biomedical applications, such as cell alignment and guidance. (paper)

Experimental Nitrogen Deposition Alters Post-fire Carbon Balance Recovery in Alberta Bogs

Science.gov (United States)

Wieder, R. K.; Vile, M. A.; Scott, K. D.; Albright, C. M.; McMillen, K.

2016-12-01

Bogs and fens occupy about 30% of the landscape across northern Alberta, Canada and function regionally as a net sink for atmospheric CO2-C, the strength of which is strongly influenced by the frequency and extent of wildfires. Alberta peatlands have persisted at the low end of the global range of annual atmospheric nitrogen (N) deposition (exchange, we experimentally applied N (as NH4NO3 solutions) to replicated plots at levels equivalent to controls (C: no water additions), 0 (water only), 10, and 20 kg/ha/yr at five bog sites, aged at 2, 12, 32, 73, and 113 years since fire in 2013 (hummocks and hollows in 6 plots per N treatment per site). Understory net ecosystem exchange of CO2 (NEE) was measured repeatedly throughout the 2013-2016 growing seasons using the closed chamber approach. Averaged across all years, sites, plots, and hummocks versus hollows, N addition stimulated NEE rates (C and 0 treatments: 0.46 µmol m-2 s-1; 10 and 20 treatments: 1.16 µmol m-2 s-1) and to a much lesser extent understory dark respiration (ER) rates (C and 0 treatments: -3.26 µmol m-2 s-1; 10 and 20 treatments: -3.43 µmol m-2 s-1). On an annual basis, averaged across all years, sites, and plots, N addition also stimulated NEE for hummocks (C and 0 treatments: -1.0 mol C m-2 yr-1; 10 and 20 treatments: 15.7 mol C m-2 yr-1), but not hollows. Experimental N addition had minimal effects on annual ER. The nature of the N response, however, differed between sites and years. Further, experimental N addition had no effect on the net primary production of Sphagnum fuscum, the dominant peat-forming moss. Thus, the enhancement of the net CO2-C sink through N addition occurs through stimulation of short-statured vascular shrub growth and biomass, with implications for the structure and function of bog understories as they recover after fire under different N deposition regimes.

Crop residue decomposition in Minnesota biochar amended plots

OpenAIRE

S. L. Weyers; K. A. Spokas

2014-01-01

Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with ...

Next Generation Quality: Assessing the Physician in Clinical History Completeness and Diagnostic Interpretations Using Funnel Plots and Normalized Deviations Plots in 3,854 Prostate Biopsies.

Science.gov (United States)

Bonert, Michael; El-Shinnawy, Ihab; Carvalho, Michael; Williams, Phillip; Salama, Samih; Tang, Damu; Kapoor, Anil

2017-01-01

Observational data and funnel plots are routinely used outside of pathology to understand trends and improve performance. Extract diagnostic rate (DR) information from free text surgical pathology reports with synoptic elements and assess whether inter-rater variation and clinical history completeness information useful for continuous quality improvement (CQI) can be obtained. All in-house prostate biopsies in a 6-year period at two large teaching hospitals were extracted and then diagnostically categorized using string matching, fuzzy string matching, and hierarchical pruning. DRs were then stratified by the submitting physicians and pathologists. Funnel plots were created to assess for diagnostic bias. 3,854 prostate biopsies were found and all could be diagnostically classified. Two audits involving the review of 700 reports and a comparison of the synoptic elements with the free text interpretations suggest a categorization error rate of 40 cases and together assessed 3,690 biopsies. There was considerable inter-rater variability and a trend toward more World Health Organization/International Society of Urologic Pathology Grade 1 cancers in older pathologists. Normalized deviations plots, constructed using the median DR, and standard error can elucidate associated over- and under-calls for an individual pathologist in relation to their practice group. Clinical history completeness by submitting medical doctor varied significantly (100% to 22%). Free text data analyses have some limitations; however, they could be used for data-driven CQI in anatomical pathology, and could lead to the next generation in quality of care.

Relative equilibrium plot improves graphical analysis and allows bias correction of SUVR in quantitative [11C]PiB PET studies

Science.gov (United States)

Zhou, Yun; Sojkova, Jitka; Resnick, Susan M.; Wong, Dean F.

2012-01-01

Both the standardized uptake value ratio (SUVR) and the Logan plot result in biased distribution volume ratios (DVR) in ligand-receptor dynamic PET studies. The objective of this study is to use a recently developed relative equilibrium-based graphical plot (RE plot) method to improve and simplify the two commonly used methods for quantification of [11C]PiB PET. Methods The overestimation of DVR in SUVR was analyzed theoretically using the Logan and the RE plots. A bias-corrected SUVR (bcSUVR) was derived from the RE plot. Seventy-eight [11C]PiB dynamic PET scans (66 from controls and 12 from mildly cognitively impaired participants (MCI) from the Baltimore Longitudinal Study of Aging (BLSA)) were acquired over 90 minutes. Regions of interest (ROIs) were defined on coregistered MRIs. Both the ROI and pixelwise time activity curves (TACs) were used to evaluate the estimates of DVR. DVRs obtained using the Logan plot applied to ROI TACs were used as a reference for comparison of DVR estimates. Results Results from the theoretical analysis were confirmed by human studies. ROI estimates from the RE plot and the bcSUVR were nearly identical to those from the Logan plot with ROI TACs. In contrast, ROI estimates from DVR images in frontal, temporal, parietal, cingulate regions, and the striatum were underestimated by the Logan plot (controls 4 – 12%; MCI 9 – 16%) and overestimated by the SUVR (controls 8 – 16%; MCI 16 – 24%). This bias was higher in the MCI group than in controls (p plot or the bcSUVR. Conclusion The RE plot improves pixel-wise quantification of [11C]PiB dynamic PET compared to the conventional Logan plot. The bcSUVR results in lower bias and higher consistency of DVR estimates compared to SUVR. The RE plot and the bcSUVR are practical quantitative approaches that improve the analysis of [11C]PiB studies. PMID:22414634

Experimental warming effects on the bacterial community structure and diversity

Science.gov (United States)

Kim, W.; Han, S.; Adams, J.; Son, Y.

2014-12-01

The objective of this study is to investigate the responses of soil bacterial community to future temperature increase by conducting open-field warming experiment. We conducted an open-field experimental warming system using infra-red heater in 2011 and regulated the temperature of warmed plots by 3oC higher than that of control plots constantly. The seeds of Pinus densiflora, Abies holophylla, Abies koreana, Betula costata, Quercus variabilis, Fraxinus rhynchophylla, and Zelkova serrata were planted in each 1 m × 1 m plot (n=3) in April, 2012. We collected soil samples from the rhizosphere of 7 tree species. DNA was extracted and PCR-amplified for the bacterial 16S gene targeting V1-V3 region. The paired-end sequencing was performed at Beijing Genome Institute (BGI, Hong Kong, China) using 2× 100 bp Hiseq2000 (Illumina). This study aimed to answer the following prediction/hypothesis: 1) Experimental warming will change the structure of soil bacterial community, 2) There will be distinct 'indicator group' which response to warming treatment relatively more sensitive than other groups. 3) Warming treatment will enhance the microbial activity in terms of soil respiration. 4) The rhizoplane bacterial communities for each of 7 tree species will show different response pattern to warming treatment. Since the sequence data does not arrive before the submission deadline, therefore, we would like to present the results and discussions on December 2014, AGU Fall Meeting.

Brains striving for coherence: Long-term cumulative plot formation in the default mode network.

Science.gov (United States)

Tylén, K; Christensen, P; Roepstorff, A; Lund, T; Østergaard, S; Donald, M

2015-11-01

Many everyday activities, such as engaging in conversation or listening to a story, require us to sustain attention over a prolonged period of time while integrating and synthesizing complex episodic content into a coherent mental model. Humans are remarkably capable of navigating and keeping track of all the parallel social activities of everyday life even when confronted with interruptions or changes in the environment. However, the underlying cognitive and neurocognitive mechanisms of such long-term integration and profiling of information remain a challenge to neuroscience. While brain activity is generally traceable within the short time frame of working memory (milliseconds to seconds), these integrative processes last for minutes, hours or even days. Here we report two experiments on story comprehension. Experiment I establishes a cognitive dissociation between our comprehension of plot and incidental facts in narratives: when episodic material allows for long-term integration in a coherent plot, we recall fewer factual details. However, when plot formation is challenged, we pay more attention to incidental facts. Experiment II investigates the neural underpinnings of plot formation. Results suggest a central role for the brain's default mode network related to comprehension of coherent narratives while incoherent episodes rather activate the frontoparietal control network. Moreover, an analysis of cortical activity as a function of the cumulative integration of narrative material into a coherent story reveals to linear modulations of right hemisphere posterior temporal and parietal regions. Together these findings point to key neural mechanisms involved in the fundamental human capacity for cumulative plot formation. Copyright © 2015 Elsevier Inc. All rights reserved.

36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

Science.gov (United States)

2010-07-01

... Well records and reports, plots and maps, samples, tests and surveys. Any technical data gathered... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property...

Development of the Veritas plot and its application in cardiac surgery: an evidence-synthesis graphic tool for the clinician to assess multiple meta-analyses reporting on a common outcome.

Science.gov (United States)

Panesar, Sukhmeet S; Rao, Christopher; Vecht, Joshua A; Mirza, Saqeb B; Netuveli, Gopalakrishnan; Morris, Richard; Rosenthal, Joe; Darzi, Ara; Athanasiou, Thanos

2009-10-01

Meta-analyses may be prone to generating misleading results because of a paucity of experimental studies (especially in surgery); publication bias; and heterogeneity in study design, intervention and the patient population of included studies. When investigating a specific clinical or scientific question on which several relevant meta-analyses may have been published, value judgments must be applied to determine which analysis represents the most robust evidence. These value judgments should be specifically acknowledged. We designed the Veritas plot to explicitly explore important elements of quality and to facilitate decision-making by highlighting specific areas in which meta-analyses are found to be deficient. Furthermore, as a graphic tool, it may be more intuitive than when similar data are presented in a tabular or text format. The Veritas plot is an adaption of the radar plot, a graphic tool for the description of multiattribute data. Key elements of meta-analytical quality such as heterogeneity, publication bias and study design are assessed. Existing qualitative methods such as the Assessment of Multiple Systematic Reviews (AMSTAR) tool have been incorporated in addition to important considerations when interpreting surgical meta-analyses such as the year of publication and population characteristics. To demonstrate the potential of the Veritas plot to inform clinical practice, we apply the Veritas plot to the meta-analytical literature comparing the incidence of 30-day stroke in off-pump coronary artery bypass surgery and conventional coronary artery bypass surgery. We demonstrate that a visually-stimulating and practical evidence-synthesis tool can direct the clinician and scientist to a particular meta-analytical study to inform clinical practice. The Veritas plot is also cumulative and allowed us to assess the quality of evidence over time. We have presented a practical graphic application for scientists and clinicians to identify and interpret

From research plots to prototype biomass plantations

Energy Technology Data Exchange (ETDEWEB)

Kenney, W.A.; Vanstone, B.J.; Gambles, R.L.; Zsuffa, L. [Univ. of Toronto, Ontario (Canada)

1993-12-31

The development of biomass energy plantations is now expanding from the research plot phase into the next level of development at larger scale plantings. This is necessary to provide: more accurate information on biomass yields, realistic production cost figures, venues to test harvesting equipment, demonstration sites for potential producers, and a supply of feedstock for prototype conversion facilities. The paper will discuss some of these objectives and some of the challenges encountered in the scale-up process associated with a willow prototype plantation project currently under development in Eastern Canada.

[The characteristics of RR-Lorenz plot in persistent atrial fibrillation patients complicating with escape beats and rhythm].

Science.gov (United States)

Pan, Yunping; Zhang, Fangfang; Liu, Ru; Jing, Yan; Shen, Jihong; Li, Zhongjian; Zhu, Huaijie

2014-06-01

To explore the characteristics of RR-Lorenz plot in persistent atrial fibrillation (AF) patients complicating with escape beats and rhythm though ambulatory electrocardiogram. The 24-hour ambulatory electrocardiogram of 291 persistent AF patients in second affiliated hospital of Zhengzhou university from July 2005 to April 2013 were retrospectively analyzed and the RR interval and the QRS wave were measured. Patients were divided into two groups according to the distribution of the RR-Lorenz point [AF without escape beats and rhythm group (Group A, n = 259) and AF with escape beats and rhythm group (Group B, n = 32)]. The characteristics of RR-Lorenz plot between the two groups were compared. (1) Fan-shaped RR-Lorenz plots were evidenced in Group A. (2)In Group B, 30 cases showed fan-shaped with L-shaped and a short dense rods along 45° line. The proportion of escape beats and rhythm was 0.28% (275/98 369) -14.06% (11 263/80 112) . The other 2 cases in group B showed no typical RR-Lorenz plots features. RR-Lorenz plot could help to quickly diagnose persistent AF complicating with escape beats and rhythm according to the typical RR-Lorenz plot characteristics in 24-hour ambulatory electrocardiogram.

Transport of cyazofamid and kresoxim methyl in runoff at the plot and catchment scales

Science.gov (United States)

Lefrancq, Marie; Joaquín García Verdú, Antonio; Maillard, Elodie; Imfeld, Gwenaël; Payraudeau, Sylvain

2013-04-01

Surface runoff and erosion during the course of rainfall events represent major processes of pesticides transport from agricultural land to aquatic ecosystem. In general, field and catchment studies on pesticide transfer are carried out separately. A study at both scales may enable to improve the understanding of scale effects on processes involved in pesticides transport and to give clues on the source areas within an agricultural catchment. In this study, the transport in runoff of two widely used fungicides, i.e. kresoxim methyl (KM) and cyazofamid (CY) was assessed in a 43 ha vineyard catchment and the relative contribution of the total fungicides export from one representative plot was evaluated. During an entire period of fungicide application, from May to August 2011, the discharge and loads of dissolved and particle-laden KM and CY were monitored at the plot and catchment scales. The results showed larger export coefficient of KM and CY from catchment (0.064 and 0.041‰ for KM and CY respectively) than from the studied plot (0.009 and 0.023 ‰ for KM and CY respectively). It suggests that the plot margins especially the road network contributed as well to the fungicide loads. This result underlines the impact of fungicide drift on non-target areas. Furthermore, a larger rainfall threshold is necessary at the plot scale to trigger runoff and mobilise pesticides than on the road network. At the plot scale, a rapid dissipation of the both fungicides in the top soil was observed. It highlights that the risky period encompasses the first rainfall events triggering runoff after the applications. At both scales, KM and CY were not detected in suspended solids (i.e. > 0.7 µm). However their partitioning in runoff water differed. 64.1 and 91.8% of the KM load was detected in the dissolved phase (i.e. particulate phase (i.e. between 0.22 and 0.7 µm) at the plot and catchment scales respectively. Although KM and CY have similar lab-defined properties, our results

Computational Drafting of Plot Structures for Russian Folk Tales.

Science.gov (United States)

Gervás, Pablo

The plots of stories are known to follow general patterns in terms of their overall structure. This was the basic tenet of structuralist approaches to narratology. Vladimir Propp proposed a procedure for the generation of new tales based on his semi-formal description of the structure of Russian folk tales. This is one of the first existing instances of a creative process described procedurally. The present paper revisits Propp's morphology to build a system that generates instances of Russian folk tales. Propp's view of the folk tale as a rigid sequence of character functions is employed as a plot driver, and some issues that Propp declared relevant but did not explore in detail-such as long-range dependencies between functions or the importance of endings-are given computational shape in the context of a broader architecture that captures all the aspects discussed by Propp. A set of simple evaluation metrics for the resulting outputs is defined inspired on Propp's formalism. The potential of the resulting system for providing a creative story generation system is discussed, and possible lines of future work are discussed.

Calibration of multivariate scatter plots for exploratory analysis of relations within and between sets of variables in genomic research

NARCIS (Netherlands)

Graffelman, J.; Eeuwijk, van F.A.

2005-01-01

The scatter plot is a well known and easily applicable graphical tool to explore relationships between two quantitative variables. For the exploration of relations between multiple variables, generalisations of the scatter plot are useful. We present an overview of multivariate scatter plots

Point and Fixed Plot Sampling Inventory Estimates at the Savannah River Site, South Carolina.

Energy Technology Data Exchange (ETDEWEB)

Parresol, Bernard, R.

2004-02-01

This report provides calculation of systematic point sampling volume estimates for trees greater than or equal to 5 inches diameter breast height (dbh) and fixed radius plot volume estimates for trees < 5 inches dbh at the Savannah River Site (SRS), Aiken County, South Carolina. The inventory of 622 plots was started in March 1999 and completed in January 2002 (Figure 1). Estimates are given in cubic foot volume. The analyses are presented in a series of Tables and Figures. In addition, a preliminary analysis of fuel levels on the SRS is given, based on depth measurements of the duff and litter layers on the 622 inventory plots plus line transect samples of down coarse woody material. Potential standing live fuels are also included. The fuels analyses are presented in a series of tables.

Video Analysis of Projectile Motion Using Tablet Computers as Experimental Tools

Science.gov (United States)

Klein, P.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Tablet computers were used as experimental tools to record and analyse the motion of a ball thrown vertically from a moving skateboard. Special applications plotted the measurement data component by component, allowing a simple determination of initial conditions and "g" in order to explore the underlying laws of motion. This experiment…

European Vegetation Archive (EVA): an integrated database of European vegetation plots

DEFF Research Database (Denmark)

Chytrý, M; Hennekens, S M; Jiménez-Alfaro, B

2015-01-01

vegetation- plot databases on a single software platform. Data storage in EVA does not affect on-going independent development of the contributing databases, which remain the property of the data contributors. EVA uses a prototype of the database management software TURBOVEG 3 developed for joint management......The European Vegetation Archive (EVA) is a centralized database of European vegetation plots developed by the IAVS Working Group European Vegetation Survey. It has been in development since 2012 and first made available for use in research projects in 2014. It stores copies of national and regional...... data source for large-scale analyses of European vegetation diversity both for fundamental research and nature conservation applications. Updated information on EVA is available online at http://euroveg.org/eva-database....

A Conductive Gel for the Plotting of Equipotential Lines

Science.gov (United States)

Elizalde-Torres, J.; González-Cardel, M.; Vega-Murguía, E. J.; Castillo-González, I.; Rodríguez-Nava, M.

2015-01-01

This paper presents the development of a conductive gel that can be used to measure the electrical potential differences on its surface, and has enough consistency to plot equipotential lines. It has a gelation time of less than 10 min, and is suitable for implementing learning experiences in a physics teaching laboratory in a 90 min session. To…

Determining the impacts of experimental forest plantation on groundwater recharge in the Nebraska Sand Hills (USA) using chloride and sulfate

Science.gov (United States)

Adane, Z. A.; Gates, J. B.

2015-02-01

Although impacts of land-use changes on groundwater recharge have been widely demonstrated across diverse environmental settings, most previous research has focused on the role of agriculture. This study investigates recharge impacts of tree plantations in a century-old experimental forest surrounded by mixed-grass prairie in the Northern High Plains (Nebraska National Forest), USA. Recharge was estimated using solute mass balance methods from unsaturated zone cores beneath 10 experimental plots with different vegetation and planting densities. Pine and cedar plantation plots had uniformly lower moisture contents and higher solute concentrations than grasslands. Cumulative solute concentrations were greatest beneath the plots with the highest planting densities (chloride concentrations 225-240 % and sulfate concentrations 175-230 % of the grassland plot). Estimated recharge rates beneath the dense plantations (4-10 mm yr-1) represent reductions of 86-94 % relative to the surrounding native grassland. Relationships between sulfate, chloride, and moisture content in the area's relatively homogenous sandy soils confirm that the unsaturated zone solute signals reflect partitioning between drainage and evapotranspiration in this setting. This study is among the first to explore afforestation impacts on recharge beneath sandy soils and sulfate as a tracer of deep drainage.

A new experimental study of charged K→3π decays

International Nuclear Information System (INIS)

Anikeev, V.; Bazilevskij, A.; Baehr, J.

1998-01-01

An experimental study was performed of the possibility to use an existing detector - the tagging station of the Tagged Neutrino Facility at IHEP, Serpukhov - for obtaining large statistics data on the decay K ± →π 0 π 0 π ± . After giving some motivation for this aim, preliminary results on Dalitz-plot slopes were presented

ngs.plot: Quick mining and visualization of next-generation sequencing data by integrating genomic databases.

Science.gov (United States)

Shen, Li; Shao, Ningyi; Liu, Xiaochuan; Nestler, Eric

2014-04-15

Understanding the relationship between the millions of functional DNA elements and their protein regulators, and how they work in conjunction to manifest diverse phenotypes, is key to advancing our understanding of the mammalian genome. Next-generation sequencing technology is now used widely to probe these protein-DNA interactions and to profile gene expression at a genome-wide scale. As the cost of DNA sequencing continues to fall, the interpretation of the ever increasing amount of data generated represents a considerable challenge. We have developed ngs.plot - a standalone program to visualize enrichment patterns of DNA-interacting proteins at functionally important regions based on next-generation sequencing data. We demonstrate that ngs.plot is not only efficient but also scalable. We use a few examples to demonstrate that ngs.plot is easy to use and yet very powerful to generate figures that are publication ready. We conclude that ngs.plot is a useful tool to help fill the gap between massive datasets and genomic information in this era of big sequencing data.

Recovery following experimental harvesting of Laminaria longicruris and L. digitata in southwestern Nova Scotia

Energy Technology Data Exchange (ETDEWEB)

Smith, B D

1985-01-01

Laminaria population variables and understory community composition were monitored just prior to, and for two summers following, a September 1980 experimental total harvest of L. longicruris De la Pylaie and L. digitata (L.) Lamouroux within two plots in Lobster Bay, Nova Scotia. Both plots, distinguished mainly by depth, were characterized by high Laminaria standing crop and no recent history of extensive sea urchin grazing. Within the shallower plot (2-3 m below MSL), recovery could not be assessed thoroughly due to ice damage, but within the deeper plot (3-4 m below MSL), L. longicruris regrew cropped biomass and attained maximum observed abundance within one year. Both Laminaria species required two years to mature to pre-harvest population characteristics. Survivorship of 0-1 year old and mature populations of both species was generally low (0-67% per year); however, the higher maximum life expectancy of L. digitata (>4 years vs 2 years) can result in that species persisting to the disadvantage of L. longicruris. Analysis of understory community composition for both harvested plots and their adjacent controls weakly distinguished the harvested plots one summer after harvesting from all others. It is doubtful the distinction is attributable to harvesting and in neither site was there evidence of a critical change in the understory community. Management implications for the commercial harvest of the brown alga Laminaria are discussed.

Computer Programs for Calculating and Plotting the Stability Characteristics of a Balloon Tethered in a Wind

Science.gov (United States)

Bennett, R. M.; Bland, S. R.; Redd, L. T.

1973-01-01

Computer programs for calculating the stability characteristics of a balloon tethered in a steady wind are presented. Equilibrium conditions, characteristic roots, and modal ratios are calculated for a range of discrete values of velocity for a fixed tether-line length. Separate programs are used: (1) to calculate longitudinal stability characteristics, (2) to calculate lateral stability characteristics, (3) to plot the characteristic roots versus velocity, (4) to plot the characteristic roots in root-locus form, (5) to plot the longitudinal modes of motion, and (6) to plot the lateral modes for motion. The basic equations, program listings, and the input and output data for sample cases are presented, with a brief discussion of the overall operation and limitations. The programs are based on a linearized, stability-derivative type of analysis, including balloon aerodynamics, apparent mass, buoyancy effects, and static forces which result from the tether line.

Action Between Plot and Discourse

DEFF Research Database (Denmark)

Grünbaum, Thor

2007-01-01

In this article, I argue that the representation of simple, bodily action has the function of endowing the narrative sequence with a visualizing power. It makes the narrated scenes or situations ready for visualization by the reader or listener. By virtue of this visualizing power or disposition...... an important visualizing function, these narrated actions have a communicative function and, as such, they can be said to belong to the domain of discourse-narratology. In the first part of the article, I argue that a certain type of plot-narratology, due to its retrospective epistemology and abstract...... definition of action, is unable to conceive of this visualizing function. In the second part, I argue that discourse-narratology fares no better since the visualizing function is independent of voice and focalization. In the final part, I sketch a possible account of the visualizing function of simple...

GRAFLAB 2.3 for UNIX - A MATLAB database, plotting, and analysis tool: User`s guide

Energy Technology Data Exchange (ETDEWEB)

Dunn, W.N.

1998-03-01

This report is a user`s manual for GRAFLAB, which is a new database, analysis, and plotting package that has been written entirely in the MATLAB programming language. GRAFLAB is currently used for data reduction, analysis, and archival. GRAFLAB was written to replace GRAFAID, which is a FORTRAN database, analysis, and plotting package that runs on VAX/VMS.

SigmaPlot 2000, Version 6.00, SPSS Inc. Computer Software Test Plan

Energy Technology Data Exchange (ETDEWEB)

HURLBUT, S.T.

2000-10-24

SigmaPlot is a vendor software product used in conjunction with the supercritical fluid extraction Fourier transform infrared spectrometer (SFE-FTIR) system. This product converts the raw spectral data to useful area numbers. SigmaPlot will be used in conjunction with procedure ZA-565-301, ''Determination of Moisture by Supercritical Fluid Extraction and Infrared Detection.'' This test plan will be performed in conjunction with or prior to HNF-6936, ''HA-53 Supercritical Fluid Extraction System Acceptance Test Plan'', to perform analyses for water. The test will ensure that the software can be installed properly and will manipulate the analytical data correctly.

PRELIMINARY STUDY OF D0 ---> K PI PI0 DECAYS WITH DALITZ PLOTS

International Nuclear Information System (INIS)

2002-01-01

Particle physicists study the smallest particles and most basic rules of their interactions in humankind's current scope. The Charm Analysis Working Group (CWG) of the BaBar Collaboration studies decays involving the charm quark. They currently study mixing in D decays, an interesting and poorly understood phenomenon in current physics models. We, as part of the CWG, investigated the plausibility of using Dalitz plots and the BaBar analysis framework to study mixing in Wrong Sign (WS) D 0 → Kππ 0 decays. Others in the CWG have studied mixing in the 2-body decay, D 0 → Kπ. The 3-body decay analyzed with the RooFitDalitz analysis package and Dalitz plots provides more information and another way of separating Doubly Cabibbo Suppressed Decays (DCSD) from mixing--which share the same end products. Through doing many simulations, we have demonstrated the usefulness of this approach. We selected D 0 → Kππ 0 events from Simulation Production run No.4 (SP4) and BaBar's run 1 and run 2. We made Dalitz plots with this data. Now that we better understand Dalitz plots and software, we plan to select WS D 0 Kpp0 events and perform rate fits as discussed in BaBar Analysis Document (BAD) No.443, as well as fits for several different decay times and resonances, in order to further distinguish DCSD from mixing

Next generation quality: Assessing the physician in clinical history completeness and diagnostic interpretations using funnel plots and normalized deviations plots in 3,854 prostate biopsies

Directory of Open Access Journals (Sweden)

Michael Bonert

2017-01-01

Full Text Available Background: Observational data and funnel plots are routinely used outside of pathology to understand trends and improve performance. Objective: Extract diagnostic rate (DR information from free text surgical pathology reports with synoptic elements and assess whether inter-rater variation and clinical history completeness information useful for continuous quality improvement (CQI can be obtained. Methods: All in-house prostate biopsies in a 6-year period at two large teaching hospitals were extracted and then diagnostically categorized using string matching, fuzzy string matching, and hierarchical pruning. DRs were then stratified by the submitting physicians and pathologists. Funnel plots were created to assess for diagnostic bias. Results: 3,854 prostate biopsies were found and all could be diagnostically classified. Two audits involving the review of 700 reports and a comparison of the synoptic elements with the free text interpretations suggest a categorization error rate of 40 cases and together assessed 3,690 biopsies. There was considerable inter-rater variability and a trend toward more World Health Organization/International Society of Urologic Pathology Grade 1 cancers in older pathologists. Normalized deviations plots, constructed using the median DR, and standard error can elucidate associated over- and under-calls for an individual pathologist in relation to their practice group. Clinical history completeness by submitting medical doctor varied significantly (100% to 22%. Conclusion: Free text data analyses have some limitations; however, they could be used for data-driven CQI in anatomical pathology, and could lead to the next generation in quality of care.

qqman: an R package for visualizing GWAS results using Q-Q and manhattan plots

OpenAIRE

Turner, Stephen

2014-01-01

Summary: Genome-wide association studies (GWAS) have identified thousands of human trait-associated single nucleotide polymorphisms. Here, I describe a freely available R package for visualizing GWAS results using Q-Q and manhattan plots. The qqman package enables the flexible creation of manhattan plots, both genome-wide and for single chromosomes, with optional highlighting of SNPs of interest. Availability: qqman is released under the GNU General Public License, and is freely available on ...

Visual evaluation of kinetic characteristics of PET probe for neuroreceptors using a two-phase graphic plot analysis.

Science.gov (United States)

Ito, Hiroshi; Ikoma, Yoko; Seki, Chie; Kimura, Yasuyuki; Kawaguchi, Hiroshi; Takuwa, Hiroyuki; Ichise, Masanori; Suhara, Tetsuya; Kanno, Iwao

2017-05-01

Objectives In PET studies for neuroreceptors, tracer kinetics are described by the two-tissue compartment model (2-TCM), and binding parameters, including the total distribution volume (V T ), non-displaceable distribution volume (V ND ), and binding potential (BP ND ), can be determined from model parameters estimated by kinetic analysis. The stability of binding parameter estimates depends on the kinetic characteristics of radioligands. To describe these kinetic characteristics, we previously developed a two-phase graphic plot analysis in which V ND and V T can be estimated from the x-intercept of regression lines for early and delayed phases, respectively. In this study, we applied this graphic plot analysis to visual evaluation of the kinetic characteristics of radioligands for neuroreceptors, and investigated a relationship between the shape of these graphic plots and the stability of binding parameters estimated by the kinetic analysis with 2-TCM in simulated brain tissue time-activity curves (TACs) with various binding parameters. Methods 90-min TACs were generated with the arterial input function and assumed kinetic parameters according to 2-TCM. Graphic plot analysis was applied to these simulated TACs, and the curvature of the plot for each TAC was evaluated visually. TACs with several noise levels were also generated with various kinetic parameters, and the bias and variation of binding parameters estimated by kinetic analysis were calculated in each TAC. These bias and variation were compared with the shape of graphic plots. Results The graphic plots showed larger curvature for TACs with higher specific binding and slower dissociation of specific binding. The quartile deviations of V ND and BP ND determined by kinetic analysis were smaller for radioligands with slow dissociation. Conclusions The larger curvature of graphic plots for radioligands with slow dissociation might indicate a stable determination of V ND and BP ND by kinetic analysis. For

Fisher.py: Fisher Matrix Manipulation and Confidence Contour Plotting

Science.gov (United States)

Coe, Dan

2010-10-01

Fisher.py allows you to combine constraints from multiple experiments (e.g., weak lensing + supernovae) and add priors (e.g., a flat universe) simply and easily. Calculate parameter uncertainties and plot confidence ellipses. Fisher matrix expectations for several experiments are included as calculated by myself (time delays) and the Dark Energy Task Force (WL/SN/BAO/CL/CMB), or provide your own.

Evaluation of a Simple, Small-Plot Meteorological Technique for Measurement of Ammonia Emission: Feasibility, Costs, and Recommendations

DEFF Research Database (Denmark)

Pedersen, Simon Vilms; di Perta, Ester Scotto; Hafner, Sasha D.

2018-01-01

are regularly developed, and their efficacy needs to be tested using accurate methods. To date, a major obstacle to many available emission measurement techniques is the requirement of large plot sizes of homogeneous surface characteristics, which particularly is a challenge to the number of plot......-level replicates that can be carried out on a field providing uniform surface characteristics throughout. The objectives of this research were to test three different methods for measuring NH3 flux when applied to small plots (methods and to determine...... techniques, wind tunnels measuring gas-phase ammonia using ALPHA passive diffusion samplers and a flux chamber method using Dräger tubes for measurements of ammonia concentration (DTM) were used. As an inexpensive alternative small-plot method, we studied the feasibility of applying ALPHA passive diffusion...

RL5SORT/RL5PLOT. A graphite package for the JRC-Ispra IBM version of RELAP5/MOD1

International Nuclear Information System (INIS)

Kolar, W.; Brewka, W.

1984-01-01

The present report describes the programs RL5SORT and RL5PLOT, their implementation and ''how to use''. Both programs base on the IBM version of RELAP5 as developed at JRC-ISPRA. RL5SORT creates from the output file (restart plot file) of a RELAP5 calculation data files, which serve as input data base for the program RL5PLOT. RL5PLOT retrieves the previous stored data records (minor edit quantities of RELAP5), allows arithmetic operations with the retrieved data and enables a print or graphic output on the terminal screen of a TEKTRONIX graphic terminal. A set of commands, incorporated in the program RL5PLOT, facilitates the user's work. Program RL5SORT has been developed as a batch program, while RL5PLOT has been conceived for interactive working mode

Video analysis of projectile motion using tablet computers as experimental tools

Science.gov (United States)

Klein, P.; Gröber, S.; Kuhn, J.; Müller, A.

2014-01-01

Tablet computers were used as experimental tools to record and analyse the motion of a ball thrown vertically from a moving skateboard. Special applications plotted the measurement data component by component, allowing a simple determination of initial conditions and g in order to explore the underlying laws of motion. This experiment can easily be performed by students themselves, providing more autonomy in their problem-solving processes than traditional learning approaches. We believe that this autonomy and the authenticity of the experimental tool both foster their motivation.

Fast, Computer Supported Experimental Determination of Absolute Zero Temperature at School

Science.gov (United States)

Bogacz, Bogdan F.; Pedziwiatr, Antoni T.

2014-01-01

A simple and fast experimental method of determining absolute zero temperature is presented. Air gas thermometer coupled with pressure sensor and data acquisition system COACH is applied in a wide range of temperature. By constructing a pressure vs temperature plot for air under constant volume it is possible to obtain--by extrapolation to zero…

Microbial response of an acid forest soil to experimental soil warming

Science.gov (United States)

S.S. Arnold; I.J. Fernandez; L.E. Rustad; L.M. Zibilske

1999-01-01

Effects of increased soil temperature on soil microbial biomass and dehydrogenase activity were examined on organic (O) horizon material in a low-elevation spruce-fir ecosystem. Soil temperature was maintained at 5 °C above ambient during the growing season in the experimental plots, and soil temperature, moisture, microbial biomass, and dehydrogenase activity were...

Serum hepcidin-25 may replace the ferritin index in the Thomas plot in assessing iron status in anemic patients.

Science.gov (United States)

Thomas, C; Kobold, U; Balan, S; Roeddiger, R; Thomas, L

2011-04-01

Biochemical markers of iron deficiency do not distinguish iron-deficient anemia (IDA) from the anemia of chronic disease (ACD) and the combined state of ACD/IDA. Serum hepcidin-25 might be a marker resolving this problem. We investigated the extent to which serum hepcidin-25 enables the differentiation of the states above in comparison with the ferritin index plot, the so-called Thomas plot [soluble transferrin receptor (sTfR)/log ferritin and the reticulocyte hemoglobin content (CHr)]. Serum hepcidin-25 was determined in 155 anemic patients who were classified as having latent iron deficiency (latent ID), IDA, ACD, or ACD/IDA using the ferritin index plot (Thomas plot). Hepcidin-25 was determined using an isotope-dilution micro-HPLC-tandem mass spectrometry method. The ability to discriminate among these states based on serum hepcidin-25 alone or in combination with the CHr was evaluated in a receiver operating characteristic curve analysis and a comparison with the recently established ferritin index plot. Serum hepcidin-25 correlated with ferritin and the ferritin index. Use of a hepcidin-25 cutoff level of ≤4 nmol/l allowed the differentiation of IDA from ACD and ACD/IDA. Furthermore, the discrimination of ACD/IDA from ACD required combination with CHr in a new plot (hepcidin-25 and the CHr). The hepcidin-25 plot and the ferritin index plot showed a good correspondence in the differentiation of iron states in patients with anemia. Patients with IDA can be differentiated from ACD and ACD/IDA but not ACD from ACD/IDA based on hepcidin-25 alone. The combination of hepcidin-25 with CHr in the hepcidin-25 plot was useful for the differentiation of the states above. © 2010 Blackwell Publishing Ltd.

TREDRA, Minimal Cut Sets Fault Tree Plot Program

International Nuclear Information System (INIS)

Fussell, J.B.

1983-01-01

1 - Description of problem or function: TREDRA is a computer program for drafting report-quality fault trees. The input to TREDRA is similar to input for standard computer programs that find minimal cut sets from fault trees. Output includes fault tree plots containing all standard fault tree logic and event symbols, gate and event labels, and an output description for each event in the fault tree. TREDRA contains the following features: a variety of program options that allow flexibility in the program output; capability for automatic pagination of the output fault tree, when necessary; input groups which allow labeling of gates, events, and their output descriptions; a symbol library which includes standard fault tree symbols plus several less frequently used symbols; user control of character size and overall plot size; and extensive input error checking and diagnostic oriented output. 2 - Method of solution: Fault trees are generated by user-supplied control parameters and a coded description of the fault tree structure consisting of the name of each gate, the gate type, the number of inputs to the gate, and the names of these inputs. 3 - Restrictions on the complexity of the problem: TREDRA can produce fault trees with a minimum of 3 and a maximum of 56 levels. The width of each level may range from 3 to 37. A total of 50 transfers is allowed during pagination

Green leaf phenology at Landsat resolution: scaling from the plot to satellite

Science.gov (United States)

Fisher, J. I.; Mustard, J. F.; Vadeboncour, M.

2005-12-01

Despite the large number of in situ, plot-level phenological measurements and satellite-derived phenological studies, there has been little success to date in merging these records temporally or spatially. In particular, while most phenological patterns and trends derived from satellites appear realistic and coherent, they may not reflect spatial and temporal patterns at the plot level. An obvious explanation is the drastic scale difference from plot-level to most satellite observations. In this research, we bridge this scale gap through higher resolution satellite records (Landsat) and quantify the accuracy of satellite-derived metrics with direct field measurements. We compiled fifty-seven Landsat scenes from southern New England (P12 R51) from 1984 to 2002. Green vegetation areal abundance for each scene was derived from spectral mixture analysis and a single set of endmembers. The leaf area signal was fit with a logistic-growth simulating sigmoid curve to derive phenological markers (half-maximum leaf-onset and offset). Spring leaf-onset dates in homogenous stands of deciduous forests displayed significant and persistent local variability. The local variability was validated with multiple springtime ground observations (r2 = 0.91). The highest degree of verified small-scale variation occurred where contiguous forests displayed leaf-onset gradients of 10-14 days over short distances (example, our results indicate that deciduous forests in the Providence, RI metropolitan area leaf out 5-7 days earlier than comparable rural areas. In preliminary work, we validated the Landsat-derived metrics with similar analyses of MODIS and AVHRR, and demonstrate that aggregating diverse local phenologies into coarse grids may convolute interpretations. Despite these complications, the platform-independent curve-fit methodology may be extended across platforms and field data. The methodologically consistent approach, in tandem with Landsat data, allows us to effectively scale

Co-evolution of soils and vegetation in the Aísa Valley Experimental Station (Central Pyrenees)

Science.gov (United States)

Serrano Muela, Maria Pilar; Nadal Romero, Estela; Lasanta, Teodoro; María García Ruiz, José

2013-04-01

Soils and vegetation tend to evolve jointly in relation to climate evolution and the impacts of human activity. This study analyzes soil and vegetation characteristics under various plant covers, using information from the Aísa Valley Experimental Station (AVES), Spanish Pyrenees, from 1991 to 2010. The land uses considered were: dense shrub cover, grazing meadow, abandoned field, cereal (barley), abandoned shifting agriculture, active shifting agriculture, burnt1 and burnt2 plots, and in-fallow plot. All the plots were installed on a field abandoned 45 years ago. Some of the plots did not change in plant cover through the study period (e.g., the meadow, cereal and shifting agriculture plots), but others underwent changes in density and composition, such as: (i) The dense shrub cover plot represents the natural evolution of the abandoned field. When the AVES was equipped, this plot was completely dominated by Genista scorpius, with a few stands of Rosa gr. Canina. Twenty years later, Genista scorpius is affected of senescence and shows almost no regeneration capacity. (ii) The abandoned field had previously been cultivated with cereals until 1993. Once abandoned, the progression of plant colonization was very rapid. Firstly with grasses and, 10 years later, with Genista scorpius. At present, this latter occupies more than 50% of the plot. (iii) The evolution of plant colonization in the abandoned shifting agriculture plot was slower than that in the 'normal' abandoned field, mainly because of the differences in fertilization when they were cultivated. (iv) One of the burnt plots evolved from 0% to a coverage of almost 100% in a shot period, whereas the other plot remained with a shrub density of about 60% several years after the fire. Soil samples (superficial and depth) were analyzed to obtain physical and chemical properties: structure, texture, pH, CaCO3, Organic Matter and various anions and cations. The main purpose was to detect differences in the soil

Chromatographic properties PLOT multicapillary columns.

Science.gov (United States)

Nikolaeva, O A; Patrushev, Y V; Sidelnikov, V N

2017-03-10

Multicapillary columns (MCCs) for gas chromatography make it possible to perform high-speed analysis of the mixtures of gaseous and volatile substances at a relatively large amount of the loaded sample. The study was performed using PLOT MCCs for gas-solid chromatography (GSC) with different stationary phases (SP) based on alumina, silica and poly-(1-trimethylsilyl-1-propyne) (PTMSP) polymer as well as porous polymers divinylbenzene-styrene (DVB-St), divinylbenzene-vinylimidazole (DVB-VIm) and divinylbenzene-ethylene glycol dimethacrylate (DVB-EGD). These MCCs have the efficiency of 4000-10000 theoretical plates per meter (TP/m) and at a column length of 25-30cm can separate within 10-20s multicomponent mixtures of substances belonging to different classes of chemical compounds. The sample amount not overloading the column is 0.03-1μg and depends on the features of a porous layer. Examples of separations on some of the studied columns are considered. Copyright © 2017 Elsevier B.V. All rights reserved.

Manual transportation within the plot and physical damages to bananas

Directory of Open Access Journals (Sweden)

Magalhães Mário Jorge Maia de

2004-01-01

Full Text Available The manual transportation of banana bunches within plots provokes physical damages to fruits compromising their quality. To assess the influence of the distance banana bunches travel on the shoulders of harvesters within the plot, on the incidence of physical damages present on the peel of fruits of the Nanicão cultivar, two experiments were carried out in the Vale do Ribeira region (SP, in sites with slope < 1%. Each experiment divided the plot in different distance bands, two of which were included in this study: one located far away from the collection roads (30-50 m and 80-100 m distance bands and another in an intermediate position (70-80 m and 130-150 m distance bands. For each distance band, six banana bunches of 36 mm gauged fruits were randomly sampled. Four banana hands were cut from the middle region of each bunch and ten fruits were assessed per hand, totaling 240 fruits per treatment. Bunches were harvested at the same maturity degree and those served as control were not transported. A total of 1440 fruits was assessed in the two experiments. The physical damages on the fruit surface were graded on a scale with 6 divisions: 0-0.25 cm²; 0.25-0.5 cm²; 0.5-1.0 cm²; 1.0-1.5 cm²; 1.5-2.0 cm²; 2.0-2.5 cm². The bunches transported on the shoulders of harvesters on distances over 70 m suffered increased (P < 0.01 damaged area. Most damages presented areas up to 0.5 cm².

Correlation analysis of respiratory signals by using parallel coordinate plots.

Science.gov (United States)

Saatci, Esra

2018-01-01

The understanding of the bonds and the relationships between the respiratory signals, i.e. the airflow, the mouth pressure, the relative temperature and the relative humidity during breathing may provide the improvement on the measurement methods of respiratory mechanics and sensor designs or the exploration of the several possible applications in the analysis of respiratory disorders. Therefore, the main objective of this study was to propose a new combination of methods in order to determine the relationship between respiratory signals as a multidimensional data. In order to reveal the coupling between the processes two very different methods were used: the well-known statistical correlation analysis (i.e. Pearson's correlation and cross-correlation coefficient) and parallel coordinate plots (PCPs). Curve bundling with the number intersections for the correlation analysis, Least Mean Square Time Delay Estimator (LMS-TDE) for the point delay detection and visual metrics for the recognition of the visual structures were proposed and utilized in PCP. The number of intersections was increased when the correlation coefficient changed from high positive to high negative correlation between the respiratory signals, especially if whole breath was processed. LMS-TDE coefficients plotted in PCP indicated well-matched point delay results to the findings in the correlation analysis. Visual inspection of PCB by visual metrics showed range, dispersions, entropy comparisons and linear and sinusoidal-like relationships between the respiratory signals. It is demonstrated that the basic correlation analysis together with the parallel coordinate plots perceptually motivates the visual metrics in the display and thus can be considered as an aid to the user analysis by providing meaningful views of the data. Copyright © 2017 Elsevier B.V. All rights reserved.

Sensitivity of temporal heart rate variability in Poincaré plot to changes in parasympathetic nervous system activity.

Science.gov (United States)

Karmakar, Chandan K; Khandoker, Ahsan H; Voss, Andreas; Palaniswami, Marimuthu

2011-03-03

A novel descriptor (Complex Correlation Measure (CCM)) for measuring the variability in the temporal structure of Poincaré plot has been developed to characterize or distinguish between Poincaré plots with similar shapes. This study was designed to assess the changes in temporal structure of the Poincaré plot using CCM during atropine infusion, 70° head-up tilt and scopolamine administration in healthy human subjects. CCM quantifies the point-to-point variation of the signal rather than gross description of the Poincaré plot. The physiological relevance of CCM was demonstrated by comparing the changes in CCM values with autonomic perturbation during all phases of the experiment. The sensitivities of short term variability (SD1), long term variability (SD2) and variability in temporal structure (CCM) were analyzed by changing the temporal structure by shuffling the sequences of points of the Poincaré plot. Surrogate analysis was used to show CCM as a measure of changes in temporal structure rather than random noise and sensitivity of CCM with changes in parasympathetic activity. CCM was found to be most sensitive to changes in temporal structure of the Poincaré plot as compared to SD1 and SD2. The values of all descriptors decreased with decrease in parasympathetic activity during atropine infusion and 70° head-up tilt phase. In contrast, values of all descriptors increased with increase in parasympathetic activity during scopolamine administration. The concordant reduction and enhancement in CCM values with parasympathetic activity indicates that the temporal variability of Poincaré plot is modulated by the parasympathetic activity which correlates with changes in CCM values. CCM is more sensitive than SD1 and SD2 to changes of parasympathetic activity.

Multi-reader ROC studies with split-plot designs: a comparison of statistical methods.

Science.gov (United States)

Obuchowski, Nancy A; Gallas, Brandon D; Hillis, Stephen L

2012-12-01

Multireader imaging trials often use a factorial design, in which study patients undergo testing with all imaging modalities and readers interpret the results of all tests for all patients. A drawback of this design is the large number of interpretations required of each reader. Split-plot designs have been proposed as an alternative, in which one or a subset of readers interprets all images of a sample of patients, while other readers interpret the images of other samples of patients. In this paper, the authors compare three methods of analysis for the split-plot design. Three statistical methods are presented: the Obuchowski-Rockette method modified for the split-plot design, a newly proposed marginal-mean analysis-of-variance approach, and an extension of the three-sample U-statistic method. A simulation study using the Roe-Metz model was performed to compare the type I error rate, power, and confidence interval coverage of the three test statistics. The type I error rates for all three methods are close to the nominal level but tend to be slightly conservative. The statistical power is nearly identical for the three methods. The coverage of 95% confidence intervals falls close to the nominal coverage for small and large sample sizes. The split-plot multireader, multicase study design can be statistically efficient compared to the factorial design, reducing the number of interpretations required per reader. Three methods of analysis, shown to have nominal type I error rates, similar power, and nominal confidence interval coverage, are available for this study design. Copyright © 2012 AUR. All rights reserved.

Assessment of errors associated with plot size and lateral movement of nitrogen-15 when studying fertilizer recovery under field conditions

International Nuclear Information System (INIS)

Sanchez, C.A.; Blackmer, A.M.; Horton, R.; Timmons, D.R.

1987-01-01

The high cost of 15 N-labeled fertilizers encourages the use of field plots having minimum size. If plot size is reduced too much, however, lateral movement of N near the plots by mass flow or diffusion within the soil or by translocation through plant roots can become a significant source of error in determinations of fertilizer N recovery. This study was initiated to assess the importance of lateral movement of labeled fertilizer when unconfined plots are used to determine recovery of fertilizer. Corn grain samples were collected at various positions inside and outside 15 N plots, and the 15 N contents of these samples were determined. The data were fit to mathematical models to estimate the extent to which lateral movement of fertilizer N caused errors in determined values of fertilizer recovery for the first, second, and third crops following fertilization. These models also were used to predict the plot size needed for similar 15 N-tracer studies in the future. The results of these studies indicate that 15 N plots having a size of 2 by 2 m are sufficiently large for determining recovery of fertilizer N for corn crops under most conditions. Where lateral movement of fertilizer N in soils is suspected to be a problem, we recommend collection of a few plant samples outside the 15 N plots as insurance against misleading conclusions concerning fertilizer N recovery

Process Waste Assessment for the Plotting and Digitizing Support Laboratory

International Nuclear Information System (INIS)

Phillips, N.M.

1994-04-01

This Process Waste Assessment was conducted to evaluate the Plotting and Digitizing Support Laboratory, located in Building 913, Room 157. It documents the processes, identifies the hazardous chemical waste streams generated by these processes, recommends possible ways to minimize waste, and serves as a reference for future assessments of this facility

Crown condition assessment at the CONECOFOR Permanent Monitoring Plots

Directory of Open Access Journals (Sweden)

Renzo NIBBI

2002-09-01

Full Text Available A detailed crown condition assessment is currently being carried out at the CONECOFOR (CONtrollo ECOsistemi FORestali, Control of Forest Ecosystems plots. The assessment began in 1996, and during the first two years (1996 and 1997 an assessment form based on previous regional experience was used; in 1998 the new official EU form was adopted. The resulting loss of comparability means that only a few indices can be used in the temporal series 1996-1999. Much effort was devoted to Quality Assurance (QA procedures. The QA program is structured as follows: (i specific field manuals have been adopted and are continuously updated; (ii a national training and intercalibration course (NT&IC is undertaken yearly before beginning the assessment campaign;( iii field checks are carried out yearly on a large number of plots. The results of the QA program have shown that for several indices the quality objectives were not reached, but the quality of the data is improving with time. To express the change in crown conditions in each area, a complex index (CCI = Crown Condition Index was adopted. This index is the result of the sum of the relativized values of all the common indices used during the four years. The following parameters were used: transparency, ramification type, leaf colour alteration extension, leaf damage extension, alteration of leaf distension extension. The range within which the CCI fluctuates was evaluated taking into account all the observations carried out at a given plot throughout the years. The number of cases over a given threshold (outliers was calculated for each year. The threshold for outliers was calculated as the median value plus 2 times the range of the interquartile value. All individual cases exceeding this value are considered outliers. The results are presented for all the areas in which the data set is complete for the four years. The yearly fluctuations are discussed and related to possible causes.

Allan Deviation Plot as a Tool for Quartz-Enhanced Photoacoustic Sensors Noise Analysis.

Science.gov (United States)

Giglio, Marilena; Patimisco, Pietro; Sampaolo, Angelo; Scamarcio, Gaetano; Tittel, Frank K; Spagnolo, Vincenzo

2016-04-01

We report here on the use of the Allan deviation plot to analyze the long-term stability of a quartz-enhanced photoacoustic (QEPAS) gas sensor. The Allan plot provides information about the optimum averaging time for the QEPAS signal and allows the prediction of its ultimate detection limit. The Allan deviation can also be used to determine the main sources of noise coming from the individual components of the sensor. Quartz tuning fork thermal noise dominates for integration times up to 275 s, whereas at longer averaging times, the main contribution to the sensor noise originates from laser power instabilities.

Dispersion-theoretical analysis of the D"+→K"−π"+π"+ Dalitz plot

International Nuclear Information System (INIS)

Niecknig, Franz; Kubis, Bastian

2015-01-01

We study the Dalitz plot of the Cabibbo-favored charmed-meson decay D"+→K"−π"+π"+ using dispersion theory. The formalism respects all constraints from analyticity and unitarity, and consistently describes final-state interactions between all three decay products. We employ pion-pion and pion-kaon phase shifts as input, and fit the pertinent subtraction constants to Dalitz plot data by the CLEO and FOCUS collaborations. Phase motions of resonant as well as nonresonant amplitudes are discussed, which should provide crucial input for future studies of CP violation in similar three-body charm decays.

On the generating function of Poincare plots defining one dimensional perturbed Hamiltonian systems

International Nuclear Information System (INIS)

Montvai, A.

1989-01-01

A simple numerical method has been devised, for deriving the generating function of an arbitrary, one dimensional Hamiltonian system represented by its Poincare plot. In this case, the plot to be numerically processed is an area preserving transformation of a two-dimensional surface onto itself. Although the method in its present form is capable of treating only this case, there are no principal restrictions excluding the analysis of systems with higher dimensionality as well. As an example, the generating function of the motion of alpha particles in a nonsymmetric, toroidal magnetic field is derived and studied numerically. (orig.)

Color palette: Plotting guide for use with GSMAP and GSDRAW digital cartographic software

International Nuclear Information System (INIS)

Schilling, S.P.; Thompson, R.A.

1989-01-01

Guidelines for plotting a variety of colors and patterns using GSMAP and GSDRAW digital cartographic programs have been developed. These color and pattern variations can be used to fill polygons (areas) on maps, charts, or diagrams. Batch processing file for plotting a sample color/pattern palette on a Hewlett Packard 7585B 8-pen plotter using GSDRAW software are provided on the disk. The detailed instructions, batch processing files, and variables used to construct the palette will provide the user ready access to 99 fill patterns, and aid in designing other useful combinations. 2 refs., 2 figs

Forest Plots in Excel: Moving beyond a Clump of Trees to a Forest of Visual Information

Science.gov (United States)

Derzon, James H.; Alford, Aaron A.

2013-01-01

Forest plots provide an effective means of presenting a wealth of information in a single graphic. Whether used to illustrate multiple results in a single study or the cumulative knowledge of an entire field, forest plots have become an accepted and generally understood way of presenting many estimates simultaneously. This article explores…

APPLE-2: an improved version of APPLE code for plotting neutron and gamma ray spectra and reaction rates

International Nuclear Information System (INIS)

Kawasaki, Hiromitsu; Seki, Yasushi.

1982-07-01

A computer code APPLE-2 which plots the spatial distribution of energy spectra of multi-group neutron and/or gamma ray fluxes, and reaction rates has been developed. This code is an improved version of the previously developed APPLE code and has the following features: (1) It plots energy spectra of neutron and/or gamma ray fluxes calculated by ANISN, DOT and MORSE. (2) It calculates and plots the spatial distribution of neutron and gamma ray fluxes and various types of reaction rates such as nuclear heating rates, operational dose rates, displacement damage rates. (3) Input data specification is greatly simplified by the use of standard, response libraries and by close coupling with radiation transport calculation codes. (4) Plotting outputs are given in camera ready form. (author)

Exploring multi-metal biosorption by indigenous metal-hyperresistant Enterobacter sp. J1 using experimental design methodologies

International Nuclear Information System (INIS)

Lu, W.-B.; Kao, W.-C.; Shi, J.-J.; Chang, J.-S.

2008-01-01

A novel experimental design, combining mixture design and response surface methodology (RSM), was developed to investigate the competitive adsorption behavior of lead, copper and cadmium by an indigenous isolate Enterobacter sp. J1 able to tolerate high concentrations of a variety of heavy metals. Using the proposed combinative experimental design, two different experiment designs in a ternary metal biosorption system can be integrated to a succinct experiment and the number of experimental trials was markedly reduced from 38 to 26 by reusing the mutual experimental data. Triangular contour diagrams and triangular three-dimensional surface plots were generated to describe the ternary metal biosorption equilibrium data in mixture design systems. The results show that the preference of metal sorption of Enterobacter sp. J1 decreased in the order of Pb 2+ > Cu 2+ > Cd 2+ . The presence of other metals resulted in a competitive effect. The influence of the other two metals in ternary metal biosorption system can be easily determined by comparing the stray distance from the single metal biosorption. The behavior of competitive biosorption was successfully described and predicted using a combined Langmuir-Freundlich model along with new three-dimensional contour-surface plots

Exploring multi-metal biosorption by indigenous metal-hyperresistant Enterobacter sp. J1 using experimental design methodologies

Energy Technology Data Exchange (ETDEWEB)

Lu, W.-B. [Department of Cosmetic Science, Chung Hwa University of Medical Technology, Tainan, Taiwan (China); Kao, W.-C.; Shi, J.-J. [Department of Chemical Engineering, National Cheng Kung University, Tainan, Taiwan (China); Chang, J.-S. [Department of Chemical Engineering, National Cheng Kung University, Tainan, Taiwan (China)], E-mail: changjs@mail.ncku.edu.tw

2008-05-01

A novel experimental design, combining mixture design and response surface methodology (RSM), was developed to investigate the competitive adsorption behavior of lead, copper and cadmium by an indigenous isolate Enterobacter sp. J1 able to tolerate high concentrations of a variety of heavy metals. Using the proposed combinative experimental design, two different experiment designs in a ternary metal biosorption system can be integrated to a succinct experiment and the number of experimental trials was markedly reduced from 38 to 26 by reusing the mutual experimental data. Triangular contour diagrams and triangular three-dimensional surface plots were generated to describe the ternary metal biosorption equilibrium data in mixture design systems. The results show that the preference of metal sorption of Enterobacter sp. J1 decreased in the order of Pb{sup 2+} > Cu{sup 2+} > Cd{sup 2+}. The presence of other metals resulted in a competitive effect. The influence of the other two metals in ternary metal biosorption system can be easily determined by comparing the stray distance from the single metal biosorption. The behavior of competitive biosorption was successfully described and predicted using a combined Langmuir-Freundlich model along with new three-dimensional contour-surface plots.

A further use for the Harvest plot: a novel method for the presentation of data synthesis.

Science.gov (United States)

Crowther, Mark; Avenell, Alison; MacLennan, Graeme; Mowatt, Graham

2011-06-01

When performing a systematic review, whether or not a meta-analysis is performed, graphical displays can be useful. Data do still need to be described, ideally in graphical form. The Harvest plot has been developed to display combined data from several studies that allows demonstration of not only effect but also study quality. We describe a modification to the Harvest plot that allows the presentation of data that normally could not be included in a forest plot meta-analysis and allows extra information to be displayed. Using specific examples, we describe how the arrangement of studies, height of the bars and additional information can be used to enhance the plot. This is an important development, which by fulfilling Tufte's nine requirements for graphical presentation, allows researchers to display evidence in a flexible way. This means readers can follow an argument in a clear and efficient manner without the need for large volumes of descriptive text. Copyright © 2011 John Wiley & Sons, Ltd. Copyright © 2011 John Wiley & Sons, Ltd.

SigmaPlot 2000, Version 6.00, SPSS Inc. Computer Software Project Management, Requirements, and Design Document

Energy Technology Data Exchange (ETDEWEB)

HURLBUT, S.T.

2000-10-24

SigmaPlot is a vendor software product that will be used to convert the area under an absorbance curve generated by a Fourier transform infrared spectrometer (FTIR) to a relative area. SigmaPlot will be used in conjunction with procedure ZA-565-301, ''Determination of Moisture by Supercritical Fluid Extraction and Infrared Detection.''

Plant species richness enhances nitrogen retention in green roof plots.

Science.gov (United States)

Johnson, Catherine; Schweinhart, Shelbye; Buffam, Ishi

2016-10-01

Vegetated (green) roofs have become common in many cities and are projected to continue to increase in coverage, but little is known about the ecological properties of these engineered ecosystems. In this study, we tested the biodiversity-ecosystem function hypothesis using commercially available green roof trays as replicated plots with varying levels of plant species richness (0, 1, 3, or 6 common green roof species per plot, using plants with different functional characteristics). We estimated accumulated plant biomass near the peak of the first full growing season (July 2013) and measured runoff volume after nearly every rain event from September 2012 to September 2013 (33 events) and runoff fluxes of inorganic nutrients ammonium, nitrate, and phosphate from a subset of 10 events. We found that (1) total plant biomass increased with increasing species richness, (2) green roof plots were effective at reducing storm runoff, with vegetation increasing water retention more than soil-like substrate alone, but there was no significant effect of plant species identity or richness on runoff volume, (3) green roof substrate was a significant source of phosphate, regardless of presence/absence of plants, and (4) dissolved inorganic nitrogen (DIN = nitrate + ammonium) runoff fluxes were different among plant species and decreased significantly with increasing plant species richness. The variation in N retention was positively related to variation in plant biomass. Notably, the increased biomass and N retention with species richness in this engineered ecosystem are similar to patterns observed in published studies from grasslands and other well-studied ecosystems. We suggest that more diverse plantings on vegetated roofs may enhance the retention capacity for reactive nitrogen. This is of importance for the sustained health of vegetated roof ecosystems, which over time often experience nitrogen limitation, and is also relevant for water quality in receiving waters

A randomized comparison between league tables and funnel plots to inform health care decision-making.

Science.gov (United States)

Anell, Anders; Hagberg, Oskar; Liedberg, Fredrik; Ryden, Stefan

2016-12-01

Comparison of provider performance is commonly used to inform health care decision-making. Little attention has been paid to how data presentations influence decisions. This study analyzes differences in suggested actions by decision-makers informed by league tables or funnel plots. Decision-makers were invited to a survey and randomized to compare hospital performance using either league tables or funnel plots for four different measures within the area of cancer care. For each measure, decision-makers were asked to suggest actions towards 12-16 hospitals (no action, ask for more information, intervene) and provide feedback related to whether the information provided had been useful. Swedish health care. Two hundred and twenty-one decision-makers at administrative and clinical levels. Data presentations in the form of league tables or funnel plots. Number of actions suggested by participants. Proportion of appropriate actions. For all four measures, decision-makers tended to suggest more actions based on the information provided in league tables compared to funnel plots (44% vs. 21%, P decision-makers more often missed to react even when appropriate. The form of data presentation had an influence on decision-making. With league tables, decision-makers tended to suggest more actions compared to funnel plots. A difference in sensitivity and specificity conditioned by the form of presentation could also be identified, with different implications depending on the purpose of comparisons. Explanations and visualization aids are needed to support appropriate actions. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

SutraPlot, a graphical post-processor for SUTRA, a model for ground-water flow with solute or energy transport

Science.gov (United States)

Souza, W.R.

1999-01-01

This report documents a graphical display post-processor (SutraPlot) for the U.S. Geological Survey Saturated-Unsaturated flow and solute or energy TRAnsport simulation model SUTRA, Version 2D3D.1. This version of SutraPlot is an upgrade to SutraPlot for the 2D-only SUTRA model (Souza, 1987). It has been modified to add 3D functionality, a graphical user interface (GUI), and enhanced graphic output options. Graphical options for 2D SUTRA (2-dimension) simulations include: drawing the 2D finite-element mesh, mesh boundary, and velocity vectors; plots of contours for pressure, saturation, concentration, and temperature within the model region; 2D finite-element based gridding and interpolation; and 2D gridded data export files. Graphical options for 3D SUTRA (3-dimension) simulations include: drawing the 3D finite-element mesh; plots of contours for pressure, saturation, concentration, and temperature in 2D sections of the 3D model region; 3D finite-element based gridding and interpolation; drawing selected regions of velocity vectors (projected on principal coordinate planes); and 3D gridded data export files. Installation instructions and a description of all graphic options are presented. A sample SUTRA problem is described and three step-by-step SutraPlot applications are provided. In addition, the methodology and numerical algorithms for the 2D and 3D finite-element based gridding and interpolation, developed for SutraPlot, are described. 1

Design Methodology and Experimental Verification of Serpentine/Folded Waveguide TWTs

Science.gov (United States)

2016-03-17

FW), oscillation, serpentine, stopband, traveling -wave tube (TWT), vacuum electronics. I. INTRODUCTION DEVELOPMENT of high-power broadband vacuum elec...tron devices (VEDs) beyond Ka-band using conventional coupled-cavity and helix traveling -wave tube (TWT) RF cir- cuit fabrication techniques is...bottom plot. III. G-BAND CIRCUIT DESIGN AND EXPERIMENTAL VALIDATION The primary motivation for the G-band amplifier was to develop a high-power broadband

Application of Tryptophan Fluorescence Bandwidth-Maximum Plot in Analysis of Monoclonal Antibody Structure.

Science.gov (United States)

Huang, Cheng-Yen; Hsieh, Ming-Ching; Zhou, Qinwei

2017-04-01

Monoclonal antibodies have become the fastest growing protein therapeutics in recent years. The stability and heterogeneity pertaining to its physical and chemical structures remain a big challenge. Tryptophan fluorescence has been proven to be a versatile tool to monitor protein tertiary structure. By modeling the tryptophan fluorescence emission envelope with log-normal distribution curves, the quantitative measure can be exercised for the routine characterization of monoclonal antibody overall tertiary structure. Furthermore, the log-normal deconvolution results can be presented as a two-dimensional plot with tryptophan emission bandwidth vs. emission maximum to enhance the resolution when comparing samples or as a function of applied perturbations. We demonstrate this by studying four different monoclonal antibodies, which show the distinction on emission bandwidth-maximum plot despite their similarity in overall amino acid sequences and tertiary structures. This strategy is also used to demonstrate the tertiary structure comparability between different lots manufactured for one of the monoclonal antibodies (mAb2). In addition, in the unfolding transition studies of mAb2 as a function of guanidine hydrochloride concentration, the evolution of the tertiary structure can be clearly traced in the emission bandwidth-maximum plot.

WorkOp-III:94 synopsis. Final-contribution mini plots and tables

International Nuclear Information System (INIS)

Serduke, F.

1995-06-01

WorkOp-III:94 is the third in a series of Opacity Workshops. The developers of twenty-one codes participated. Thirty-eight plasmas were selected for their relevance to problems of interest or for the challenge they would pose to the models. Frequently-dependent absorption coefficients, mean opacities, ionization distributions and other detailed information were submitted, discussed and resubmitted. This synopsis contains a subset of the information presented at the workshop and in the considerably more extensive, forthcoming, final report. A quick overview of the mean opacities that were submitted can be obtained from the graphical-table plots of the Rosseland and Planck means for all the cases. In addition, for each or the 38 plasma cases, there is a single page of mini plots of all total absorption coefficients submitted plus tables of integral quantities such as mean opacities, chemical potential and average ionization stage

A Computer Program for Drip Irrigation System Design for Small Plots

Science.gov (United States)

Philipova, Nina; Nicheva, Olga; Kazandjiev, Valentin; Chilikova-Lubomirova, Mila

2012-12-01

A computer programhas been developed for design of surface drip irrigation system. It could be applied for calculation of small scale fields with an area up to 10 ha. The program includes two main parts: crop water requirements and hydraulic calculations of the system. It has been developed in Graphical User Interface in MATLAB and gives opportunity for selecting some parameters from tables such as: agro- physical soil properties, characteristics of the corresponding crop, climatic data. It allows the user of the program to assume and set a definite value, for example the emitter discharge, plot parameters and etc. Eight cases of system layout according to the water source layout and the number of plots of the system operation are laid into hydraulic section of the program. It includes the design of lateral, manifold, main line and pump calculations. The program has been compiled to work in Windows.

WorkOp-III:94 synopsis. Final-contribution mini plots and tables

Energy Technology Data Exchange (ETDEWEB)

Serduke, F.

1995-06-01

WorkOp-III:94 is the third in a series of Opacity Workshops. The developers of twenty-one codes participated. Thirty-eight plasmas were selected for their relevance to problems of interest or for the challenge they would pose to the models. Frequently-dependent absorption coefficients, mean opacities, ionization distributions and other detailed information were submitted, discussed and resubmitted. This synopsis contains a subset of the information presented at the workshop and in the considerably more extensive, forthcoming, final report. A quick overview of the mean opacities that were submitted can be obtained from the graphical-table plots of the Rosseland and Planck means for all the cases. In addition, for each or the 38 plasma cases, there is a single page of mini plots of all total absorption coefficients submitted plus tables of integral quantities such as mean opacities, chemical potential and average ionization stage.

Vegetation growth parameters and leaf temperature: Experimental results from a six plots green roofs' system

International Nuclear Information System (INIS)

Ferrante, Patrizia; La Gennusa, Maria; Peri, Giorgia; Rizzo, Gianfranco; Scaccianoce, Gianluca

2016-01-01

The paper provides a contribution for populating database of three physical parameters needed to model energy performance of buildings with green roofs: “coverage ratio” (σ_f), leaf area index (LAI) and leaf temperature (T_f). On purpose, six plant species were investigated experimentally: Phyla nordiflora, Aptenia lancifolia, Mesembryanthenum barbatus, Gazania nivea, Gazania uniflora, and Sedum. Proper ranges of the cited parameters have been found for each species. The here indicated ranges of σ_f values refer to different growth levels of the species in the same lapse of time, that is four months. Single measured LAI values are also reported for the same plants. As for the T_f (upper and lower layer), ranges of revealed temperatures refer to those detected from 10:30 a.m. to 16:30 p.m. of a selected day. Additionally, the dependence of T_f on climatic parameters was investigated. A linear equation resulted the best fitting curve for all experimental T_f data and the corresponding solar radiation data (with autocorrelation coefficients between 0.80 and 0.98). Furthermore, the effect potentially produced on building energy consumption by these species was analyzed using a simulation tool. Estimated cooling energy savings range approximately between 8% and 20% depending on adopted plants. - Highlights: • Green roof modeling requires the knowledge of various physical parameters. • Coverage ratio, leaf area index and leaves temperatures were measured for six species. • A tentative correlation between leaf temperature and climatic parameters was shown. • A correlation between LAI and coverage ratio was checked and discussed. • Potential effects of studied species on building energy consumption were investigated.

Managing data from remeasured plots: An evaluation of existing systems

Science.gov (United States)

John C. Byrne; Michael D. Sweet

1992-01-01

Proper management of the valuable data from remeasured (or permanent) forest growth plots with data base management systems (DBMS) can greatly add to their utility. Twelve desired features for such a system (activities that facilitate the storage, accuracy, and use of the data for analysis) are described and used to evaluate the 36 systems found by a survey conducted...

Quality control of measurements made on fixed-area sample plots

Science.gov (United States)

Ola Lindgren

2000-01-01

The paper describes results from a large program for quality control of forest measurements. The performance of 87 surveyors was evaluated. Tree heights were usually measured well, whereas the counting of tree-rings on increment cores was a source of considerable bias for many surveyors. During tree count on sample plots, many surveyors had a tendency to forget trees,...

Assessing heterogeneity in soil nitrogen cycling: a plot-scale approach

Science.gov (United States)

Peter Baas; Jacqueline E. Mohan; David Markewitz; Jennifer D. Knoepp

2014-01-01

The high level of spatial and temporal heterogeneity in soil N cycling processes hinders our ability to develop an ecosystem-wide understanding of this cycle. This study examined how incorporating an intensive assessment of spatial variability for soil moisture, C, nutrients, and soil texture can better explain ecosystem N cycling at the plot scale. Five sites...

Dynamics of non-structural carbohydrates in three Mediterranean woody species following long-term experimental drought.

Science.gov (United States)

Rosas, Teresa; Galiano, Lucía; Ogaya, Romà; Peñuelas, Josep; Martínez-Vilalta, Jordi

2013-01-01

Stored non-structural carbohydrates (NSC) have been proposed as a key determinant of drought resistance in plants. However, the evidence for this role is controversial, as it comes mostly from observational, short-term studies. Here, we take advantage of a long-term experimental throughfall reduction to elucidate the response of NSC to increased drought 14 years after the beginning of the treatment in three Mediterranean resprouter trees (Quercus ilex L., Arbutus unedo L. and Phillyrea latifolia L.). In addition, we selected 20 Q. ilex individuals outside the experimental plots to directly assess the relationship between defoliation and NSC at the individual level. We measured the seasonal course of NSC concentrations in leaves, branches and lignotuber in late winter, late spring, summer, and autumn 2012. Total concentrations of NSC were highest in the lignotuber for all species. In the long-term drought experiment we found significant depletion in concentrations of total NSC in treatment plots only in the lignotuber of A. unedo. At the same time, A. unedo was the only species showing a significant reduction in BAI under the drought treatment during the 14 years of the experiment. By contrast, Q. ilex just reduced stem growth only during the first 4 years of treatment and P. latifolia remained unaffected over the whole study period. However, we found a clear association between the concentrations of NSC and defoliation in Q. ilex individuals sampled outside the experimental plots, with lower total concentrations of NSC and lower proportion of starch in defoliated individuals. Taken together, our results suggest that stabilizing processes, probably at the stand level, may have been operating in the long-term to mitigate any impact of drought on NSC levels, and highlight the necessity to incorporate long-term experimental studies of plant responses to drought.

Dynamics of non-structural carbohydrates in three Mediterranean woody species following long-term experimental drought

Directory of Open Access Journals (Sweden)

Teresa eRosas

2013-10-01

Full Text Available Stored non-structural carbohydrates (NSC have been proposed as a key determinant of drought resistance in plants. However, the evidence for this role is controversial, as it comes mostly from observational, short-term studies. Here, we take advantage of a long-term experimental throughfall reduction to elucidate the response of NSC to increased drought 14 years after the beginning of the treatment in three Mediterranean woody species (Quercus ilex L., Arbutus unedo L. and Phillyrea latifolia L.. In addition, we selected 20 Q. ilex individuals outside the experimental plots to directly assess the relationship between defoliation and NSC at the individual level. We measured the seasonal course of NSC concentrations in leaves, branches and lignotuber in late winter, late spring, summer and autumn 2012. Total concentrations of NSC were highest in the lignotuber for all species. In the long-term drought experiment we found significant depletion in concentrations of total NSC in treatment plots only in the lignotuber of A. unedo. At the same time, A. unedo was the only species showing a significant reduction in BAI under the drought treatment during the 14 years of the experiment. By contrast, Q. ilex just reduced stem growth only during the first 4 years of treatment and P. latifolia remained unaffected over the whole study period. However, we found a clear association between the concentrations of NSC and defoliation in Q. ilex individuals sampled outside the experimental plots, with lower total concentrations of NSC and lower proportion of starch in defoliated individuals. Taken together, our results suggest that stabilizing processes, probably at the stand level, may have been operating in the long-term to mitigate any impact of drought on NSC levels, and highlight the necessity to incorporate long-term experimental studies of plant responses to drought.

Optimizing variable radius plot size and LiDAR resolution to model standing volume in conifer forests

Science.gov (United States)

Ram Kumar Deo; Robert E. Froese; Michael J. Falkowski; Andrew T. Hudak

2016-01-01

The conventional approach to LiDAR-based forest inventory modeling depends on field sample data from fixed-radius plots (FRP). Because FRP sampling is cost intensive, combining variable-radius plot (VRP) sampling and LiDAR data has the potential to improve inventory efficiency. The overarching goal of this study was to evaluate the integration of LiDAR and VRP data....

Land rental market, off-farm employment and agricultural production in Southeast China: A plot-level case study

NARCIS (Netherlands)

Feng, S.; Heerink, N.; Ruben, R.; Qu, F.

2010-01-01

This paper performs a plot-level analysis of the impact of land rental market participation and off-farm employment on land investment, input use, and rice yields for 215 plots cultivated by 52 households in three villages in Northeast Jiangxi Province. Our findings show that households that rent

Tracker Alignment Performance Plots after Commissioning

CERN Document Server

CMS Collaboration

2017-01-01

During the LHC shutdown in Winter 2016/17, the CMS pixel detector, the inner component of the CMS Tracker, was replaced by the Phase-1 upgrade detector. Among others improvements, the new pixel detector consists of four instead of three layers in the central barrel region (BPIX) and three instead of two disks in the endcap regions (FPIX). In this report, performance plots of pixel detector alignment results are presented, which were obtained with both cosmic-ray and pp collision data acquired at the beginning of the 2017 LHC operation. Alignment constants have been derived for each data-taking period to the level of single module positions in both the pixel and the strip detectors. The complete understanding of the alignment and biases was derived by using two algorithms, Millepede-II and HipPy. The results confirm each other.

Application of SWAT99.2 to sensitivity analysis of water balance components in unique plots in a hilly region

Directory of Open Access Journals (Sweden)

Jun-feng Dai

2017-07-01

Full Text Available Although many sensitivity analyses using the soil and water assessment tool (SWAT in a complex watershed have been conducted, little attention has been paid to the application potential of the model in unique plots. In addition, sensitivity analysis of percolation and evapotranspiration with SWAT has seldom been undertaken. In this study, SWAT99.2 was calibrated to simulate water balance components for unique plots in Southern China from 2000 to 2001, which included surface runoff, percolation, and evapotranspiration. Twenty-one parameters classified into four categories, including meteorological conditions, topographical characteristics, soil properties, and vegetation attributes, were used for sensitivity analysis through one-at-a-time (OAT sampling to identify the factor that contributed most to the variance in water balance components. The results were shown to be different for different plots, with parameter sensitivity indices and ranks varying for different water balance components. Water balance components in the broad-leaved forest and natural grass plots were most sensitive to meteorological conditions, less sensitive to vegetation attributes and soil properties, and least sensitive to topographical characteristics. Compared to those in the natural grass plot, water balance components in the broad-leaved forest plot demonstrated higher sensitivity to the maximum stomatal conductance (GSI and maximum leaf area index (BLAI.

Program EVALPLOT (Version 79-1): plot data in the Evaluated-Nuclear-Data File/Version B (ENDF/B) format

International Nuclear Information System (INIS)

Cullen, D.E.

1979-01-01

Program EVALPLOT is designed to plot evaluated cross sections in the ENDF/B format. The program plots cross sections, angular distributions, energy distributions, and parameters (e.g., μ-bar, xi-bar, and ν-bar). 16 figures, 2 tables

Effect of vegetal cover on runoff and soil erosion under light intensity events. Rainfall simulation over USLE plots.

Science.gov (United States)

Marques, María José; Bienes, Ramón; Jiménez, Luis; Pérez-Rodríguez, Raquel

2007-05-25

The erosive power of frequent light rainfalls is studied in this paper. Field experiments of simulated rainfall (Intensity, 21 mm h(-1) and kinetic energy, 13.5 J m(-2) mm(-1)) were conducted over 8 bounded USLE plots (80 m(2) each) with a slope of 10%. In 4 plots the soil was almost bare (<4% vegetation cover); the other 4 plots had almost full cover with natural vegetation in one year. Runoff and sediment yield was recorded. The results revealed the efficiency of vegetation cover reducing runoff and sediments. Runoff and sediments were negligible in covered plots. Therefore, in bare plots, although sediment yield was generally low, averaging 74+/-43 kg ha(-1), the mean of runoff achieved a coefficient of 35%, this magnitude has to be taken into consideration in this region verging on aridity. Rains around 13.5 J m(-2) mm(-1) of kinetic energy are quite frequent in the study area (34% of recorded rains en 12 years). If we would consider the usual lower limits from the literature, we would be ignoring an important percent of natural rainfall episodes.

Effects of logging and recruitment on community phylogenetic structure in 32 permanent forest plots of Kampong Thom, Cambodia.

Science.gov (United States)

Toyama, Hironori; Kajisa, Tsuyoshi; Tagane, Shuichiro; Mase, Keiko; Chhang, Phourin; Samreth, Vanna; Ma, Vuthy; Sokh, Heng; Ichihashi, Ryuji; Onoda, Yusuke; Mizoue, Nobuya; Yahara, Tetsukazu

2015-02-19

Ecological communities including tropical rainforest are rapidly changing under various disturbances caused by increasing human activities. Recently in Cambodia, illegal logging and clear-felling for agriculture have been increasing. Here, we study the effects of logging, mortality and recruitment of plot trees on phylogenetic community structure in 32 plots in Kampong Thom, Cambodia. Each plot was 0.25 ha; 28 plots were established in primary evergreen forests and four were established in secondary dry deciduous forests. Measurements were made in 1998, 2000, 2004 and 2010, and logging, recruitment and mortality of each tree were recorded. We estimated phylogeny using rbcL and matK gene sequences and quantified phylogenetic α and β diversity. Within communities, logging decreased phylogenetic diversity, and increased overall phylogenetic clustering and terminal phylogenetic evenness. Between communities, logging increased phylogenetic similarity between evergreen and deciduous plots. On the other hand, recruitment had opposite effects both within and between communities. The observed patterns can be explained by environmental homogenization under logging. Logging is biased to particular species and larger diameter at breast height, and forest patrol has been effective in decreasing logging. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Size Effect of the 2-D Bodies on the Geothermal Gradient and Q-A Plot

Science.gov (United States)

Thakur, M.; Blackwell, D. D.

2009-12-01

Using numerical models we have investigated some of the criticisms on the Q-A plot of related to the effect of size of the body on the slope and reduced heat flow. The effects of horizontal conduction depend on the relative difference of radioactivity between the body and the country rock (assuming constant thermal conductivity). Horizontal heat transfer due to different 2-D bodies was numerically studied in order to quantify resulting temperature differences at the Moho and errors on the predication of Qr (reduced heat flow). Using the two end member distributions of radioactivity, the step model (thickness 10km) and exponential model, different 2-D models of horizontal scale (width) ranging from 10 -500 km were investigated. Increasing the horizontal size of the body tends to move observations closer towards the 1-D solution. A temperature difference of 50 oC is produced (for the step model) at Moho between models of width 10 km versus 500 km. In other words the 1-D solution effectively provides large scale averaging in terms of heat flow and temperature field in the lithosphere. For bodies’ ≤ 100 km wide the geotherms at shallower levels are affected, but at depth they converge and are 50 oC lower than that of the infinite plate model temperature. In case of 2-D bodies surface heat flow is decreased due to horizontal transfer of heat, which will shift the Q-A point vertically downward on the Q-A plot. The smaller the size of the body, the more will be the deviation from the 1-D solution and the more will be the movement of Q-A point downwards on a Q-A plot. On the Q-A plot, a limited points of bodies of different sizes with different radioactivity contrast (for the step and exponential model), exactly reproduce the reduced heat flow Qr. Thus the size of the body can affect the slope on a Q-A plot but Qr is not changed. Therefore, Qr ~ 32 mWm-2 obtained from the global terrain average Q-A plot represents the best estimate of stable continental mantle heat

The non-linear fitting method to analyze the measured M-S plots of bipolar passive films

International Nuclear Information System (INIS)

Jiang Ruijing; Chen Changfeng; Zheng Shuqi

2010-01-01

Mott-Schottky (M-S) analysis is an effective approach to investigate the electronic property of passive films of metals, and it is well suitable for the passive film with single space charge capacitance. But there is no proper method to analyze the C sc -2 vs. V m plots of passive films with several space charge capacitances in series connection, such as bipolar passive films. In this paper, the relationship between the space charge capacitance of the bipolar passive film and the applied potential was deduced and the features of corresponding plots were given out simultaneously. Accordingly, a non-linear fitting method was presented to analyze the C sc -2 vs. V m plots of bipolar passive films. Then the method was used to study the semiconductor characteristics of bipolar passive films formed on the surface of Nickel base alloy after being corroded in the environments with high temperatures and high partial pressures of H 2 S/CO 2 . The fitting results indicate that the non-linear fitting of M-S plots can well help to understand the anti-corrosion mechanism of bipolar passive films.

Dynamics, aboveground biomass and composition on permanent plots, Tambopata National Reserve. Madre de Dios, Peru

Directory of Open Access Journals (Sweden)

Nadir C. Pallqui

2014-12-01

Full Text Available In this study we evaluated the floristic composition and changes in stored biomass and dynamics over time in 9 permanent plots monitored by RAINFOR (Amazon Forest Inventory Network and located in the lowland Amazon rainforest of the Tambopata National Reserve. Data were acquired in the field using the standardized methodology of RAINFOR. The biomass was estimated using the equation for tropical moist forests of Chave et al. (2005. Biomass dynamics were analyzed, in three separated periods from 2003 to 2011. 64 families, 219 genera and 531 species were recorded. The tree floristic composition is very similar in all plots except for one swamp plot, although but it is also evident that two slightly different forest communities exist in the rest of landscape, apparently related to the age of the ancient river terraces in the area. Mortality and recruitment of individuals averaged 2.12 ± 0.52% and 1.92 ± 0.49%, respectively. The turnover rate is 2.02% per year. Aboveground biomass stored in these forests averages 296.2 ± 33.9 t ha-1. The biomass dynamics show a total net gain of 1.96, 1.69 and –1.23 t ha-1 for period respectively. Prior to the drought of 2010 a change in biomass was found 1.88 t ha-1 yr-1 and post drought was -0.18 t ha-1 yr-1 on average, though the difference is not significant. Demographic analysis suggests a dynamic equilibrium in the plots. The negative balance of biomass observed for the period 2008 – 2011 may be due to the drought of 2010, in which half of the monitored plots experienced negative net biomass change due to mortality of individuals selectively affecting the floristic composition.

Recovery of heart rate variability after treadmill exercise analyzed by lagged Poincaré plot and spectral characteristics.

Science.gov (United States)

Shi, Ping; Hu, Sijung; Yu, Hongliu

2018-02-01

The aim of this study was to analyze the recovery of heart rate variability (HRV) after treadmill exercise and to investigate the autonomic nervous system response after exercise. Frequency domain indices, i.e., LF(ms 2 ), HF(ms 2 ), LF(n.u.), HF(n.u.) and LF/HF, and lagged Poincaré plot width (SD1 m ) and length (SD2 m ) were introduced for comparison between the baseline period (Pre-E) before treadmill running and two periods after treadmill running (Post-E1 and Post-E2). The correlations between lagged Poincaré plot indices and frequency domain indices were applied to reveal the long-range correlation between linear and nonlinear indices during the recovery of HRV. The results suggested entirely attenuated autonomic nervous activity to the heart following the treadmill exercise. After the treadmill running, the sympathetic nerves achieved dominance and the parasympathetic activity was suppressed, which lasted for more than 4 min. The correlation coefficients between lagged Poincaré plot indices and spectral power indices could separate not only Pre-E and two sessions after the treadmill running, but also the two sessions in recovery periods, i.e., Post-E1 and Post-E2. Lagged Poincaré plot as an innovative nonlinear method showed a better performance over linear frequency domain analysis and conventional nonlinear Poincaré plot.

Relative equilibrium plot improves graphical analysis and allows bias correction of SUVR in quantitative [11C]PiB PET studies

OpenAIRE

Zhou, Yun; Sojkova, Jitka; Resnick, Susan M.; Wong, Dean F.

2012-01-01

Both the standardized uptake value ratio (SUVR) and the Logan plot result in biased distribution volume ratios (DVR) in ligand-receptor dynamic PET studies. The objective of this study is to use a recently developed relative equilibrium-based graphical plot (RE plot) method to improve and simplify the two commonly used methods for quantification of [11C]PiB PET.

Prognostic value of Poincare plot as nonlinear parameter of chaos theory in patients with myocardial infarction

Directory of Open Access Journals (Sweden)

Milovanović Branislav

2007-01-01

Full Text Available Introduction: There are different proofs about association of autonomic nervous system dysfunction, especially nonlinear parameters, with higher mortality after myocardial infarction. Objective The objective of the study was to determine predictive value of Poincare plot as nonlinear parameter and other significant standard risk predictors: ejection fraction of the left ventricle, late potentials, ventricular arrhythmias, and QT interval. Method The study included 1081 patients with mean follow up of 28 months (ranging fom 0-80 months. End-point of the study was cardiovascular mortality. The following diagnostic methods were used during the second week: ECG with commercial software Schiller AT-10: short time spectral analysis of RR variability with analysis of Poincare plot as nonlinear parameter and late potentials; 24-hour ambulatory ECG monitoring: QT interval, RR interval, QT/RR slope, ventricular arrhythmias (Lown >II; echocardiography examinations: systolic disorder (defined as EF<40 %. Results There were 103 (9.52% cardiovascular deaths during the follow-up. In univariate analysis, the following parameters were significantly correlated with mortality: mean RR interval < 800 ms, QT and RR interval space relationship as mean RR interval < 800 ms and QT interval > 350 ms, positive late potentials, systolic dysfunction, Poincare plot as a point, ventricular arrhythmias (Lown > II. In multivariate analysis, the significant risk predictors were: Poincare plot as a point and mean RR interval lower than 800 ms. Conclusion Mean RR interval lower than 800 ms and nonlinear and space presentation of RR interval as a point Poincare plot were multivariate risk predictors.

Soil aggregate stability and rainfall-induced sediment transport on field plots as affected by amendment with organic matter inputs

Science.gov (United States)

Shi, Pu; Arter, Christian; Liu, Xingyu; Keller, Martin; Schulin, Rainer

2017-04-01

Aggregate stability is an important factor in soil resistance against erosion, and, by influencing the extent of sediment transport associated with surface runoff, it is thus also one of the key factors which determine on- and off-site effects of water erosion. As it strongly depends on soil organic matter, many studies have explored how aggregate stability can be improved by organic matter inputs into the soil. However, the focus of these studies has been on the relationship between aggregate stability and soil organic matter dynamics. How the effects of organic matter inputs on aggregate stability translate into soil erodibility under rainfall impacts has received much less attention. In this study, we performed field plot experiments to examine how organic matter inputs affect aggregate breakdown and surface sediment transport under field conditions in artificial rainfall events. Three pairs of plots were prepared by adding a mixture of grass and wheat straw to one of plots in each pair but not to the other, while all plots were treated in the same way otherwise. The rainfall events were applied some weeks later so that the applied organic residues had sufficient time for decomposition and incorporation into the soil. Surface runoff rate and sediment concentration showed substantial differences between the treatments with and without organic matter inputs. The plots with organic inputs had coarser and more stable aggregates and a rougher surface than the control plots without organic inputs, resulting in a higher infiltration rate and lower transport capacity of the surface runoff. Consequently, sediments exported from the amended plots were less concentrated but more enriched in suspended particles (selective sediment transport. In contrast to the amended plots, there was an increase in the coarse particle fraction (> 250 µm) in the runoff from the plots with no organic matter inputs towards the end of the rainfall events due to emerging bed-load transport

Experimental investigation of criteria for continuous variable entanglement.

Science.gov (United States)

Bowen, W P; Schnabel, R; Lam, P K; Ralph, T C

2003-01-31

We generate a pair of entangled beams from the interference of two amplitude squeezed beams. The entanglement is quantified in terms of EPR paradox and inseparability criteria, with both results clearly beating the standard quantum limit. We experimentally analyze the effect of decoherence on each criterion and demonstrate qualitative differences. We also characterize the number of required and excess photons present in the entangled beams and provide contour plots of the efficacy of quantum information protocols in terms of these variables.

How effective are soil conservation techniques in reducing plot runoff and soil loss in Europe and the Mediterranean?

Science.gov (United States)

Maetens, W.; Poesen, J.; Vanmaercke, M.

2012-10-01

The effects of soil and water conservation techniques (SWCTs) on annual runoff (Ra), runoff coefficients (RCa) and annual soil loss (SLa) at the plot scale have been extensively tested on field runoff plots in Europe and the Mediterranean. Nevertheless, a comprehensive overview of these effects and the factors controlling the effectiveness of SWCTs is lacking. Especially the effectiveness of SWCT in reducing Ra is poorly understood. Therefore, an extensive literature review is presented that compiles the results of 101 earlier studies. In each of these studies, Ra and SLa was measured on field runoff plots where various SWCTs were tested. In total, 353 runoff plots (corresponding to 2093 plot-years of data) for 103 plot-measuring stations throughout Europe and the Mediterranean were considered. SWCTs include (1) crop and vegetation management (i.e. cover crops, mulching, grass buffer strips, strip cropping and exclosure), (2) soil management (i.e. no-tillage, reduced tillage, contour tillage, deep tillage, drainage and soil amendment) and (3) mechanical methods (i.e. terraces, contour bunds and geotextiles). Comparison of the frequency distributions of SLa rates on cropland without and with the application of SWCTs shows that the exceedance probability of tolerable SLa rates is ca. 20% lower when SWCT are applied. However, no notable effect of SWCTs on the frequency distribution of RCa is observed. For 224 runoff plots (corresponding to 1567 plot-year data), SWCT effectiveness in reducing Ra and/or SLa could be directly calculated by comparing measured Ra and/or SLa with values measured on a reference plot with conventional management. Crop and vegetation management techniques (i.e. buffer strips, mulching and cover crops) and mechanical techniques (i.e. geotextiles, contour bunds and terraces) are generally more effective than soil management techniques (i.e. no-tillage, reduced tillage and contour tillage). Despite being generally less effective, no

Establishing a long-term permanent plot in remnant forest of Cibodas Botanic Garden, West Java

Directory of Open Access Journals (Sweden)

ZAENAL MUTAQIEN

2011-10-01

Full Text Available Mutaqien Z, Zuhri M (2011 Establishing a long-term permanent plot in remnant forest of Cibodas Botanic Garden, West Java. Biodiversitas 12: 218-224. Cibodas Botanic Garden (CBG has unique characters; almost 10% of which is forested area adjacent to the natural forest of Mt. Gede Pangrango National Park. The area is a transition between natural forest and artificial habitat which mostly consists of exotic plant species. The permanent plot in CBG was established in 2007-2009. Two hundred and eighty four units of 10x10 square meters sub-plot were established in four locations, i.e. Wornojiwo, Kompos, Jalan Akar, and Lumut forest. Vegetation analyses were conducted for trees, saplings, shrubs, and herb species. The inventory found 137 species plants consisting of 74 tree species dominated by Villebrunea rubescens (Bl. Bl. and Ostodes paniculata Bl., 30 shrub species dominated by Strobilanthes hamiltoniana (Steud., 24 herb species dominated by Cyrtandra picta Bl., 6 fern species mainly consisted of Diplazium pallidum Moore, and 3 climber species dominated by Calamus reinwardtii Mart. In comparison with the natural forest of Mt. Gede Pangrango National Park, the CBG permanent plot showed a good representative of the vegetation of lower montane forest. A regular monitoring during the successive years is needed to maintain diversity, monitor forest dynamics and anticipate the spread of invasive plant from CBG.

Evaluation of the Soil Conservation Service curve number methodology using data from agricultural plots