Some thoughts on the Turkish electricity distribution industry

International Nuclear Information System (INIS)

Erdogdu, Erkan

2009-01-01

Over the past decade or so, the electricity industry of the Republic of Turkey (and indeed the world) has undergone profound reform in its structure, ownership and mindset. Increasing public concern about efficiency in the sector has led Turkey to discard the traditional model of a vertically integrated industry subject to cost-based regulation in favor of the unbundling of activities and the introduction of competition where it is possible. The industry has been structurally separated into generation, transmission, distribution and retail segments. The competitive segments of the industry (generation and retail) are planed to progressively expose to competition; the monopoly segments (especially, distribution) are to be reoriented to foster competition. Further, the ownership of the industry is under increasing pressure to move away from the public domain into the private one. The present article not only presents an analysis of the Turkish distribution sector and proposed privatization process but also provides some guidelines for policy makers. (author)

Reliability and Validity of the Turkish Version of Brandes, Dharwadkar, and Dean’s (1999) Organizational Cynicism Scale: The Case of Organized Industrial Zone, Kayseri

OpenAIRE

Karacaoglu, Korhan; Ince, Fatma

2012-01-01

The aim of this research is to investigate the validity and reliability of Turkish version of Organizational Cynicism Scale developed by Brandes et al. (1999). The research was conducted on 300 workers employed in the manufacturing entreprises of Kayseri Organized Industrial Zone. The psychometric properties of the scale were examined by cronbach alpha and item-total corelations for the reliability, and exploratory and confirmatory factor analyses for the validity. As a result of the factor a...

Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

Directory of Open Access Journals (Sweden)

Adam Sanders

2016-09-01

Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

Integration with the Global Economy: The Case of Turkish Automobile and Consumer Electronics Industries

OpenAIRE

Erol Taymaz; Kamil Yılmaz

2008-01-01

This paper provides an extensive case study of the Turkish automotive and the consumer electronics industries. Despite a macroeconomic environment that inhibits investment and growth, both industries have achieved remarkable output and productivity growth since the early 1990s. Although there are similarities between the performances of the two industries, there are significant differences...

Turkish confection industry in Amsterdam: the rise and fall of a perfectly competitive labour market

NARCIS (Netherlands)

Hartog, J.; Zorlu, A.

1998-01-01

While the Dutch textile industry declined rapidly, Turkish entrepreneurs created a growing industry for fashion goods with highly flexible demand in an informal sector that was initially tolerated by the autorities and attracted many undocumented immigrants. It led to the unusual spectacle of a

Manufacturing Industry, Industry Study, Spring 2009

Science.gov (United States)

2009-01-01

Shuib, Lieutenant Colonel, Royal Malaysian Air Force Kevin Brennan, Commander, U.S. Navy Mr. K. Ilia Christman, Department of the Navy Robert Costa...panel to review the impact of taxation , regulatory compliance, and benefits burdens on domestic manufacturers. Review would bring focus to ways...Finally, the MISG considered the effect of these 14 characteristics on the U.S. Manufacturing Industry vis-à-vis Chinese and Malaysian

Photovoltaic industry manufacturing technology. Final report

Energy Technology Data Exchange (ETDEWEB)

Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

1998-08-01

This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

Industry 4.0 and representative participation in innovation in manufacturing industries

OpenAIRE

Ramioul, Monique

2017-01-01

Industry 4.0 and representative participation in innovation in manufacturing industries Prof. dr. Monique Ramioul HIVA-KU Leuven, Belgium Abstract submitted for the ETUI-workshop “Digitalization of manufacturing and restructuring of value chains: technology adoption, upgrading, and the changing geography of production in Europe.” (23-24 February 2017, Naples Italy). Under the umbrella concept Industry4.0, the advanced digitalisation and robotisation of industry is presented as a pro...

CONTEMPORARY USAGE OF TRADITIONAL TURKISH MOTIFS IN PRODUCT DESIGNS

Directory of Open Access Journals (Sweden)

Tulay Gumuser

2012-12-01

Full Text Available The aim of this study is to identify the traditional Turkish motifs and its relations among present industrial designs. Traditional Turkish motifs played a very important role in 16th century onwards. The arts of the Ottoman Empire were used because of their symbolic meanings and unique styles. When we examine these motifs we encounter; Tiger Stripe, Three Spot (Çintemani, Rumi, Hatayi, Penç, Cloud, Crescent, Star, Crown, Hyacinth, Tulip and Carnation motifs. Nowadays, Turkish designers have begun to use these traditional Turkish motifs in their designs so as to create differences and awareness in the world design. The examples of these industrial designs, using the Turkish motifs, have survived and have Ottoman heritage and historical value. In this study, the Turkish motifs will be examined along with their focus on contemporary Turkish industrial designs used today.

[Chinese medicine industry 4.0：advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

Science.gov (United States)

Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

2016-01-01

A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

Inter- and intra-industry variations of capital structure in the Czech manufacturing industry

Directory of Open Access Journals (Sweden)

Pavlína Pinková

2013-01-01

Full Text Available The objective of the paper is to investigate the existence of inter-industry variations in the capital structure of enterprises of the Czech manufacturing industry and to identify the intra-industry causes of these differences. Three measures of capital structure are employed to determine the inter-industry variations. These are total debt ratio, long-term debt and short-term debt ratios. The set of explanatory variables is included to clarify the intra-industry variations. These explanatory variables are size, asset structure, asset utilization, profitability, non-debt tax shield and growth. The paper reports the analysis of capital structure of five distinctive industrial branches, namely the manufacture of beverages, the manufacture of textiles, the manufacture of paper and paper products, the manufacture of chemicals and chemical products, and the manufacture of computer, electronic and optical products. The data come from the financial statements of selected companies and cover a period from 2008 to 2012. The analysis of variance, correlation and regression analyses are used to develop the statistical framework. The paper aims to study the impact of industry and firm characteristics on capital structure choice.

Energy use in the food manufacturing industry

Energy Technology Data Exchange (ETDEWEB)

Cleland, A.C.; Earle, M.D.

1980-01-01

A survey was conducted to find the level of energy consumption in the food manufacturing industry, which is the food processing industry excluding meat, dairy, and brewing. Data were used from 74 factories. The manufacturing industry was divided into 14 industry groups and the 4 major energy consumers were found to be fruit and vegetable processing, sugar refining, animal feed production, and bread and pastry baking. The present report summarizes results from the survey. It determined the following: the sources of energy used by the insu industry and the annual consumption of each energy form; the consumption of fuel and electricity in the production of the various manufactured food products; the minimum practical energy requirement for processing the various food products; and the potential for conservation and the methods for achieving savings.

Manufacturing strategy issues in selected Indian manufacturing industry

Directory of Open Access Journals (Sweden)

Mahender Singh

2013-03-01

Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

Ergonomic Conditions in Small Manufacturing Industries

Directory of Open Access Journals (Sweden)

Ashraf A. Shikdar

2001-12-01

Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

Analysis of Intra-Industry Trade in Turkish Automotive Sector

Directory of Open Access Journals (Sweden)

Füsun YENİLMEZ

2018-01-01

Full Text Available The automotive sector is one of the important sectors affecting the economy of a country. Considering the export and import size of the sector, any kind of work to be done for the sector is important. The analysis of Turkey's situation in the sector will contribute to R&D studies to develop the sector, strategic planning and determination of short, medium and long term targets. The aim of the paper is to determine the location of the Turkish automotive industry in world trade. For this purpose, firstly products in the automotive sector foreign trade were reduced to three sub-digit and included in the evaluation. Grubel-Lloyd index is used in the analysis. As a result of the analyzes, Turkey has been determined separately according to the product groups of the countries that have the most intensive trade in industry.

Energy efficiency in the world and Turkey and investigation of energy efficiency in Turkish Industry

International Nuclear Information System (INIS)

Kavak, K.

2005-09-01

The reserves of fossil fuels which currently respond to the major part of world energy requirements are being running out very fast. Because it is forecasted that reserves of some fossil fuels like oil and natural gas will come to an end in the second half of this century, exploiting all energy resources in an efficient manner has great importance. Throughout the world where the energy demand grows continuously but the resources decrease gradually, many types of programs are implemented to provide efficient energy use. In Turkey, although there have been some efforts in last two decades, the importance of the issue could not be undersood yet. Turkey'sgeneral energy policy still focuses on supply security and finding ways to meet the growing demand, rather than decreasing the demand by energy efficiency. In this study, the possible opportunities and benefits that Turkey would gain by energy efficiency is pointed out. The studies about energy efficiency which have been conducted in the world and Turkey are examined. The measurement that can be taken in the sectors such as industry, power plants, buildings, transportation and the utilities of these measures for energy economy are indicated. The successful practices of energy efficiency studies in various countries, the state of some countries which pioneer efficiency implementations. Turkey's situation in energy in the light of basic indicators such as energy consumption per capita and enrgy intensity, the energy efficiency studies that have been done and should be done in various sectors of Turkey are also discussed in this thesis. Turkish industry's energy comsumption is analyzed as a seperate chapter by taking into consideration energy efficiency, energy intensity and energy resources. The general energy consumption and energy intensity tendencies of main manufacturing industries between 1995 and 2002 are explored and resource utilization ratios are investigated. This chapter provides to find out what kind of

Product Life Cycle of the Manufactured Home Industry

Directory of Open Access Journals (Sweden)

Gavin Wherry

2014-09-01

Full Text Available Residential construction consumes an estimated 26 percent of the total U.S. wood harvest and thus plays an important role in the forest products value chain. While being a relatively small part of the U.S. residential construction market, the factory-built residential housing industry, originating from manufactured homes (e.g. mobile homes, is embracing emerging industry segments such as modular or panelized homes. Since indications exist that factory-built home production is slated to gain a more prominent role in the U.S. construction markets at the cost of traditional stick-built production, the factory-built home industry sub-segment is of considerable importance to the forest products industry. This research looks at manufactured home producers as a benchmark for analyzing the current economic state of the industry and discusses competitive strategies. The analysis concludes, through macroeconomic modeling, that manufactured homes are in the declining stage of their product life cycle due to changes to the U.S. residential construction sector and the factory-built home industry and by advancements of rival industry-segments. As market share continues to decline, firms operating in this industry-segment seek to either hedge their losses through product diversification strategies or remain focused on strategically repositioning the manufactured home segment.

Computer integrated manufacturing in the chemical industry : Theory & practice

NARCIS (Netherlands)

Ashayeri, J.; Teelen, A.; Selen, W.J.

1995-01-01

This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.

THE RELATIONSHIP BETWEEN ORGANIZATIONAL CULTURE TYPES AND OCCUPATIONAL PRESSURE VARIABLES: A RESEARCH ON FEMALE EMPLOYEES IN THE TURKISH MANUFACTURING INDUSTRY

Directory of Open Access Journals (Sweden)

Seyhan GÜLER

2012-11-01

Full Text Available Abstract: In this study; concepts of organizational culture, gender and gender discrimination have been explained. The main argument of this study is that cultural values have a significant effect on gender and gender discrimination. The main aim in this research is to find out the effects of organizational culture on work pressure on female employees and the relationship between organizational culture   types and occupational pressure variables. The research was conducted in the Turkish manufacturing industry. Organizational culture construct was used to test the hypothesis. This stage was based on 236 responses received from sample of 384 companies. Data was generated through questionnaires and was analyzed using SPSS. The findings show that the constructs are reliable and exhibit validity. The multidimensional operationalization of the construct allowed the testing of the relationship between organizational cultures and the dimensions of work pressure. Keywords:                Organizational Culture, Occupational Pressure, Manufacturing Industry.ÖRGÜT KÜLTÜRÜ TÜRLERİ İLE MESLEKİ BASKI DEĞİŞKENLERİ ARASINDAKİ İLİŞKİ: TÜRK İMALAT SEKTÖRÜNDE BAYAN ÇALIŞANLAR ÜZERİNDE BİR ARAŞTIRMAÖzet: Bu çalışmada örgüt kültürü, cinsiyet ve cinsiyet ayrımcılığı açıklanmıştır. Çalışmanın temel iddiası kültürel değerlerin cinsiyet ve cinsiyet ayrımcılığı üzerinde önemli etkiye sahip olduğudur. Çalışmanın ana amacı orgüt kültürünün kadın çalışanlardaki iş baskısı üzerindeki etkisinin ve örgüt kültürü ile mesleki baskı değişkenleri arasındaki ilişkinin ortaya çıkarılmasıdır. Araştırma Türk imalat sanayiinde gerçekleştirilmiştir. Hipotezlerin testinde örgüt kültürü ölçeği kullanılmıştır. Bu aşama, örnek büyüklüğü olan 384 şirketten geri dönen 236’sından alınan veriler ile gerçekleştirilmiştir. Soru formları ile al

Survey of US Department of Defense Manufacturing Technology Program activities applicable to civilian manufacturing industries. Final report

Energy Technology Data Exchange (ETDEWEB)

Azimi, S.A.; Conrad, J.L.; Reed, J.E.

1985-03-01

Intent of the survey was to identify and characterize activities potentially applicable to improving energy efficiency and overall productivity in the civilian manufacturing industries. The civilian industries emphasized were the general manufacturing industries (including fabricated metals, glass, machinery, paper, plastic, textile, and transportation equipment manufacturing) and the primary metals industries (including primary aluminum, copper, steel, and zinc production). The principal steps in the survey were to: develop overview taxonomies of the general manufacturing and primary metals industries as well as specific industry taxonomies; identify needs and opportunities for improving process energy efficiency and productivity in the industries included; identify federal programs, capabilities, and special technical expertise that might be relevant to industry's needs and opportunities; contact federal laboratories/facilities, through visits and other forms of inquiry; prepare formatted profiles (descriptions) potentially applicable work efforts; review findings with industry; and compile and evaluate industry responses.

Integrating developing country manufacturing industries into global supply chain

Directory of Open Access Journals (Sweden)

Fasika Bete Georgise

2014-01-01

Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as enablers for lean manufacturing

OpenAIRE

Sanders, Adam; Elangeswaran, Chola; Wulfsberg, Jens

2016-01-01

Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industr...

Optimizing inventory management in the insulation manufacturing industry

OpenAIRE

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

2016-01-01

Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. T...

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Revisiting the Competitiveness of Romanian Manufacturing Industry

Directory of Open Access Journals (Sweden)

Ovidiu RUJAN

2007-01-01

Full Text Available Since the early 1990s the Romanian manufacturing industry has improved in many ways. This headway concerns the labour-intensive sector rather than the technology-intensive one. Apart from local entrepreneurship, foreign direct investments (FDI have been instrumental in enhancing industrial competitiveness. TheLisbon Agenda revival and Romania’s EU accession will be further inducements for Western businesses to shift production here to fight back both low-cost producers (typically from emerging Asia and more quality-oriented producers (typically from OECD countries. Hopefully, the FDI spillover effects will send positive vibrationsacross the economy, and tone down the asymmetry at the core of the manufacturing industry.

PREVIOUS DEVELOPMENTS AND THE CURRENT SITUATION IN THE TURKISH BANKING SECTOR, FOREIGN ENTRY AND ITS REFLECTIONS ON THE NATIONAL BANKING INDUSTRY

Directory of Open Access Journals (Sweden)

Aytac GOKMEN

2009-01-01

Full Text Available The banking industry possesses a unique property that is unlike to other sectors with respect to supplying liquidity and financial strength for the economy and transaction operations However, despite their significance, banking industries in the world are subject to various crises and foreign interventions that could affect the financial industry negatively. This study describes the background of the Turkish Banking Sector, explains the reasons for the three major crises it was subjected to in 1994, 2001 and 2002 that resulted from numerous factors such as insufficient implementation of regulations, inadequate depth of the capital markets, lack of assessment of risk, inadequate managerial applications and excessive lending to incorporated institutions. The study also dwells on the restructuring process that has been continuing for more than two decades, reasons of foreign entry to the Turkish Banking Industry, as well as explains the reflections of foreign entry on the national banking industry depending on various comprehensive and credible national and international publications.

Sustainable Manufacturing Practices in Malaysian Automotive Industry: Confirmatory Factor Analysis

OpenAIRE

Habidin, Nurul Fadly; Zubir, Anis Fadzlin Mohd; Fuz, Nursyazwani Mohd; Latip, Nor Azrin Md; Azman, Mohamed Nor Azhari

2015-01-01

Sustainable manufacturing practices (SMPs) have received enormous attention in current years as an effective solution to support the continuous growth and expansion of the automotive manufacturing industry. This reported study was conducted to examine confirmatory factor analysis for SMP such as manufacturing process, supply chain management, social responsibility, and environmental management based on automotive manufacturing industry. The results of confirmatory factor analysis show that fo...

Anti-tobacco control industry strategies in Turkey.

Science.gov (United States)

Keklik, Seda; Gultekin-Karakas, Derya

2018-02-26

Transnational tobacco companies (TTCs) penetrated the Turkish cigarette market due to trade and investment liberalization in the post-1980 period and eventually secured full control. Despite tobacco control policies put in place in reaction to accelerating consumption, TTCs reinforced their market power through a variety of strategies. This paper explores industry strategies that counteract tobacco control policies in Turkey. The study employs both qualitative and quantitative analyses to explore industry strategies in Turkey. Besides the content analyses of industry and market reports, descriptive analyses were conducted for the sub-periods of 1999-2015. The analyses focus on the market strategies of product innovation, advertisement-promotion, cost management and pricing. Rising sales of low tar, ultra-low tar, slim, super-slim and flavoured cigarettes indicate that product innovation served to sustain consumption. Besides, the tobacco industry, using its strong distribution channels, the Internet, and CSR projects, were found to have promoted smoking indirectly. The industry also rationalized manufacturing facilities and reduced the cost of tobacco, making Turkey a cigarette-manufacturing base. Tobacco manufacturers, moreover, offered cigarettes in different price segments and adjusted net prices both up and down according to price categories and market conditions. In response to the successful effect of shifts in price margins, the market share of mid-priced cigarettes expanded while those within the economy category maintained the highest market share. As a result of pricing strategies, net sales revenues increased. Aside from official cigarette sales, the upward trends in the registered and unregistered sales of cigarette substitutes indicate that the demand-side tobacco control efforts remain inadequate. The Turkish case reveals that the resilience of the tobacco industry vis-à-vis mainstream tobacco control efforts necessitates a new policy perspective

Research on networked manufacturing system for reciprocating pump industry

Science.gov (United States)

Wu, Yangdong; Qi, Guoning; Xie, Qingsheng; Lu, Yujun

2005-12-01

Networked manufacturing is a trend of reciprocating pump industry. According to the enterprises' requirement, the architecture of networked manufacturing system for reciprocating pump industry was proposed, which composed of infrastructure layer, system management layer, application service layer and user layer. Its main functions included product data management, ASP service, business management, and customer relationship management, its physics framework was a multi-tier internet-based model; the concept of ASP service integration was put forward and its process model was also established. As a result, a networked manufacturing system aimed at the characteristics of reciprocating pump industry was built. By implementing this system, reciprocating pump industry can obtain a new way to fully utilize their own resources and enhance the capabilities to respond to the global market quickly.

Optimizing inventory management in the insulation manufacturing industry

DEFF Research Database (Denmark)

Herbert-Hansen, Zaza Nadja Lee; Larsen, Samuel

2016-01-01

Inventory issues within the insulation manufacturing industry are essential for competitiveness. However, they are largely unexplored in academic literature. Therefore the aim of this paper is to address the research question: “What approach to inventory management provides the best balance between...... service level and cost for the insulation manufacturing industry?” This is done through an in-depth case study of a world-leading company within this industry, with focus on two of its factories. This paper contributes with empirical research within operations management in a sector which has not been...

Shaping the manufacturing industry performance: MIDAS approach

International Nuclear Information System (INIS)

Turhan, Ibrahim M.; Sensoy, Ahmet; Hacihasanoglu, Erk

2015-01-01

We aim to find out whether the exchange rate (against US dollar) or the interest rate (in local currency) is a better variable in predicting the capacity utilization rate of manufacturing industry (CUR) of Turkey after the 2008 global financial crisis. In that manner, we implement dynamic mixed data sampling (MIDAS) regression model to forecast monthly changes in CUR by using daily changes in the exchange rate and the interest rate separately. The results show that exchange rate has a better forecast performance suggesting that it is a stronger determinant in shaping the manufacturing industry

The U.S. Arms Embargo of 1975-1978 and Its Effects on the Development of the Turkish Defense Industry

Science.gov (United States)

2014-09-01

Turkish Defense Industry 15. NUMBER OF PAGES 93 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY CLASSIFICATION...Organization CPI consumer price inflation DIEC Defense Industry Executive Committee DP Democrat Party EEC European Economic Community EOKA...sugar, and flour . With the return of men to their homes after World War I and the Independence War, Turkey experienced a dramatic increase in

RPC industries - UV and EB equipment manufacturers

International Nuclear Information System (INIS)

Rodrigues, A.M.

1987-01-01

RPC Industries has been manufacturing electron beam and ultraviolet equipment for the industrial processing of materials for more than 15 years. RPC maintains its headquarters and electron processor manufacturing plant in Hayward, California. UV equipment is made in the company's plant near Chicago. Sales offices are maintained in New York, Illinois, and California in the USA, and in Germany, Japan, Australia, Italy, Israel, and Sweden. Complete testing and pilot facilities are available in Hayward (EB) and near Chicago (UV). Described below are the basic system components, applications and advantages of RPC's UV and EB systems. (orig.)

Offshoring trends in the manufacturing process within the automotive industry

DEFF Research Database (Denmark)

Simplay, S.; Hansen, Zaza Nadja Lee

2014-01-01

consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development...... engineering activities. This development has created several challenges. These challenges arose as organisations are not considering how offshoring activities could be integrated with an increasingly global supply chain for the manufacturing of the final product. The paper contributes to manufacturing theory...

The near-term impacts of carbon mitigation policies on manufacturing industries

International Nuclear Information System (INIS)

Morgenstern, Richard D.; Ho Mun; Shih, J.-S.; Zhang Xuehua

2004-01-01

Who pays for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries are combined with input-output information on inter-industry purchases to paint a detailed picture of carbon use, including effects on final demand. Regional information on electricity supply and use by region is also incorporated. A relatively simple model is developed which yields estimates of the relative burdens within the manufacturing sector of alternative carbon policies. Overall, the principal conclusion is that within the manufacturing sector (which by definition excludes coal production and electricity generation), only a small number of industries would bear a disproportionate short-term burden of a carbon tax or similar policy. Not surprisingly, an electricity-only policy affects very different manufacturing industries than an economy-wide carbon tax

Scope of Internal Supply Chain Management Benchmarking in Indian Manufacturing Industries

OpenAIRE

Kailash; Rajeev Kumar Saha; Sanjeev Goyal

2017-01-01

Internal supply chain management benchmarking practice is necessary to overcome manufacturing industrial performance gap. The main purpose of this research work is to combine the benchmarking and internal supply chain practices to improve the performance of Indian manufacturing industries. In this paper, the main aim is to discuss the components of internal supply chain between suppliers and customers after that explain the scope of ISCM benchmarking in manufacturing industries.

Stimulating Manufacturing Excellence through University-Industry Interaction

DEFF Research Database (Denmark)

Riis, Jens Ove

2001-01-01

This paper considers what a university engineering school can do to stimulate manufacturing excellence in industry. Aalborg University, with its unique use of problem-based learning methods, is used as a case example. This approach is also embedded in a new research initiative, the Centre...... for Industrial Production. Examples of industry involvement in research and development projects are given. Such university–industry collaboration will not only benefit the development of competencies in large and small industrial enterprises, but will also provide a laboratory setting for the study...

Regional Capital Inputs in Chinese Industry and Manufacturing, 1978-2003

NARCIS (Netherlands)

Wang, Lili; Szirmai, Adam

2008-01-01

This paper provides new estimates of capital inputs in the Chinese economy. Estimates are made for the total economy (1953-2003), for the industrial sector (1978-2003) and for the manufacturing sector (1985-2003). The estimates for industry and manufacturing are broken down by thirty regions. The

Smart manufacturing systems for Industry 4.0: Conceptual framework, scenarios, and future perspectives

Science.gov (United States)

Zheng, Pai; wang, Honghui; Sang, Zhiqian; Zhong, Ray Y.; Liu, Yongkui; Liu, Chao; Mubarok, Khamdi; Yu, Shiqiang; Xu, Xun

2018-06-01

Information and communication technology is undergoing rapid development, and many disruptive technologies, such as cloud computing, Internet of Things, big data, and artificial intelligence, have emerged. These technologies are permeating the manufacturing industry and enable the fusion of physical and virtual worlds through cyber-physical systems (CPS), which mark the advent of the fourth stage of industrial production (i.e., Industry 4.0). The widespread application of CPS in manufacturing environments renders manufacturing systems increasingly smart. To advance research on the implementation of Industry 4.0, this study examines smart manufacturing systems for Industry 4.0. First, a conceptual framework of smart manufacturing systems for Industry 4.0 is presented. Second, demonstrative scenarios that pertain to smart design, smart machining, smart control, smart monitoring, and smart scheduling, are presented. Key technologies and their possible applications to Industry 4.0 smart manufacturing systems are reviewed based on these demonstrative scenarios. Finally, challenges and future perspectives are identified and discussed.

An investigation on the technical standard strategy for China's manufacturing industry

International Nuclear Information System (INIS)

Ma Limin; Jiang Xiangqian; Xu Zhengao; Li Zhu

2005-01-01

China's manufacturing industry is now the 4th largest manufacturing power in the world, second only to the US, Japan, and Germany. Large but not strong, it is still way behind developed countries. In the technical standard field, the gap between China's manufacturing industry and industrially developed countries is showing that there is a low level of technological standards and lack of professional talent versed in technical standards. A technical standards strategy is of importance to the development of China's manufacturing industry has been as one of the major strategies in the 10th Five-Year Plan period. The overall objective of the strategy for China's technical standards should be capable of supporting Chinese enterprises and products in entering the international market and ensuring the superiority of China's key industries in international competition. The implementing tactics of the strategy are all-round tracking, effective adoption, crucial participation, and strong dominance

Artificial Immune Algorithm for Subtask Industrial Robot Scheduling in Cloud Manufacturing

Science.gov (United States)

Suma, T.; Murugesan, R.

2018-04-01

The current generation of manufacturing industry requires an intelligent scheduling model to achieve an effective utilization of distributed manufacturing resources, which motivated us to work on an Artificial Immune Algorithm for subtask robot scheduling in cloud manufacturing. This scheduling model enables a collaborative work between the industrial robots in different manufacturing centers. This paper discussed two optimizing objectives which includes minimizing the cost and load balance of industrial robots through scheduling. To solve these scheduling problems, we used the algorithm based on Artificial Immune system. The parameters are simulated with MATLAB and the results compared with the existing algorithms. The result shows better performance than existing.

Profiles of Material Supplier Industries to the Automotive Manufacturers

Science.gov (United States)

1981-07-01

This report presents a study of industries supplying materials to the automobile manufacturers. As the automobile industry restructures itself to produce more fuel-efficient vehicles, many of the industries that depend on the automobile will be force...

Intelligent Manufacturing in the Context of Industry 4.0: A Review

Directory of Open Access Journals (Sweden)

Ray Y. Zhong

2017-10-01

Full Text Available Our next generation of industry—Industry 4.0—holds the promise of increased flexibility in manufacturing, along with mass customization, better quality, and improved productivity. It thus enables companies to cope with the challenges of producing increasingly individualized products with a short lead-time to market and higher quality. Intelligent manufacturing plays an important role in Industry 4.0. Typical resources are converted into intelligent objects so that they are able to sense, act, and behave within a smart environment. In order to fully understand intelligent manufacturing in the context of Industry 4.0, this paper provides a comprehensive review of associated topics such as intelligent manufacturing, Internet of Things (IoT-enabled manufacturing, and cloud manufacturing. Similarities and differences in these topics are highlighted based on our analysis. We also review key technologies such as the IoT, cyber-physical systems (CPSs, cloud computing, big data analytics (BDA, and information and communications technology (ICT that are used to enable intelligent manufacturing. Next, we describe worldwide movements in intelligent manufacturing, including governmental strategic plans from different countries and strategic plans from major international companies in the European Union, United States, Japan, and China. Finally, we present current challenges and future research directions. The concepts discussed in this paper will spark new ideas in the effort to realize the much-anticipated Fourth Industrial Revolution.

Centers for manufacturing technology: Industrial Advisory Committee Review

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-10-01

An advisory committee, composed of senior managers form industrial- sector companies and major manufacturing trade associations and representatives from appropriate educational institutions, meets semi-annually to review and advise the Oak Ridge Centers for Manufacturing Technology (ORCMT) on its economic security program. Individual papers have been indexed separately for the database.

Exploring the options for carbon dioxide mitigation in Turkish electric power industry: System dynamics approach

International Nuclear Information System (INIS)

Saysel, Ali Kerem; Hekimoğlu, Mustafa

2013-01-01

Electric power industry has a huge carbon mitigation potential, fundamentally because there are large carbon-free, renewable resource options. In Turkey, with growing demand in electricity consumption and incentives offered for natural gas fired electricity generation, CO 2 emissions sourced from electric power industry had tripled over the last two decades. Current governmental strategy focuses on energy security and resource diversity in a growing economy and does not articulate sufficient mitigation targets and appropriate regulations. In this research, an original dynamic simulation model is built, validated and analyzed to explore the options for carbon mitigation in Turkish electric power industry. Model structure represents the investment, dispatch and pricing heuristics as well as the natural resource base of electricity generation in Turkey. It operates on annual basis over 30 years to simulate installed capacities and generations of power plants with alternative resources and their resulting CO 2 emissions. The analysis presented in this paper reveals that there are mitigation options below 50% of business as usual growth, with common policy options such as feed-in-tariffs, investment subsidies and carbon taxes. The model can serve as an experimental platform for further analysis of problems related to carbon mitigation in Turkish electricity sector. - Highlights: • An original computer model is created to investigate carbon mitigation. • It is holistic and comprises investment, generation, dispatch, and resources. • The model's structure, information base and foresights are specific to Turkey. • Direct and indirect strategies are explored and integrated. • Dramatic reductions are possible only with supply side strategies

Study of skin and mucous membrane disorders among workers engaged in the sodium dichromate manufacturing industry and chrome plating industry.

Science.gov (United States)

Singhal, Vijay Kumar; Deswal, Balbir Singh; Singh, Bachu Narayan

2015-01-01

Inhalation of dusts and fumes arising during the manufacture of sodium dichromate from chrome ore, chromic acid mist emitted during electroplating, and skin contact with chromate produce hazards to workers. (1) To elucidate the prevalence of skin and mucous membrane disorders among the workers engaged in the sodium dichromate manufacturing industry and chrome plating industry. (2) To know the relationship of prevalence with the duration of exposure to chrome mist, dust, and fumes. A cross-sectional study was conducted among all the workers engaged in sodium dichromate manufacturing and chrome plating from several industries situated near the Delhi-Haryana border in the districts of Faridabad and Sonepat of Haryana, India from January 01, 2014 to December 31, 2014. All the workers available from the concerned industries for the study were interviewed and medically examined after obtaining their informed consent. A total of 130 workers comprising 66 workers from the sodium dichromate manufacturing industry and 64 workers from the chrome plating industry were examined on a pretested schedule. Descriptive statistical methods (proportions, relative risk, and Chi-square test of significance with P value analyzed using Epi Info version 7). All the workers were found to be males and of the adult age group. Out of the total examined, 69.69% and 56.22% of the workers had disorders of the nasal mucous membrane in the sodium dichromate manufacturing industry and the chrome plating industry, respectively. 42.42% and 28.22% of the workers had perforation of the nasal septum in the sodium dichromate manufacturing industry and chrome plating industry, respectively. 6.06% and 3.12% workers had skin ulcers in the sodium dichromate manufacturing industry and chrome plating industry, respectively. Nasal irritation and rhinorrhea were the most commonly found symptoms in both the processes. 48.48% and 90.52% of the workers were using hand gloves in the sodium dichromate manufacturing

From domestic manufacture to Industrial Revolution

DEFF Research Database (Denmark)

Weisdorf, Jacob Louis

2006-01-01

industrial development. An emerging view, however, turns the old story on its head, arguing that agricultural improvement is a response to urban development. This paper follows the line of this emerging view, demonstrating that productivity growth in commercial manufacture is crucial to the performance...

Türk Savunma Sanayi Firmaları Vizyon ve Misyon İfadelerinin İçerik Analizi (The Content Analysis of Vision and Mission Statements in Turkish Defense Industry Firms

Directory of Open Access Journals (Sweden)

Metin OCAK

2016-08-01

Full Text Available In this research, components used in mission and vision statements by Turkish Defense Industry Firms and their relations with national defense industry guidance documents are examined. For this reason 87 vision and 79 mission statements which mentioned on the web pages of 148 Turkish Defense Industry Firms’ are taken into consideration. A qualitative research design phenomenology was used and the data were analyzed through content analysis in this study. At the end of the analysis, it is identified that there are common 14 components in vision statements and 13 common components in mission statements. Also it is discovered that some of the components are relevant with components mentioned in the national defense industry guidance documents.

Industrial conflict and its management in selected Nigerian manufacturing companies

Directory of Open Access Journals (Sweden)

Solaja Oludele Mayowa

2015-12-01

Full Text Available This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies under the study. The data collected were analyzed using descriptive statistic including tables, frequency counts, and percentages as well as mean scores. The findings revealed that the causes of conflict in manufacturing companies in Lagos State, Nigeria include poor means of communicating grievances to top managers, unfavorable economic and industrial policies, poor employee compensation and welfare among others. Therefore, this study concluded that managers should combine strategies such as bargaining, collaboration and avoidance when dealing with industrial conflict to maintain cordial and productive labour-management relationship.

Characterization of cyclical phases in the manufacturing industry in Spain

Directory of Open Access Journals (Sweden)

Mercè Sala

2014-09-01

Full Text Available 120 Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish economy, as this means they have a positive influence on economic activity. Design/methodology/approach: We examine the disaggregated quarterly IPI data of 16 manufacturing industries. Our methodology follows three steps. Firstly, we define cycle turning points; we follow the Harding and Pagan (2002 methodology. Secondly, we characterize the cyclical phases of the manufacturing industries in terms of duration, amplitude, deepness and steepness. We also determine the degree of inter-industrial cyclical synchronization and between industries in the cycle of the Spanish economy. This analysis is performed in two ways. On the one hand, we use the concordance index and the correlation coefficient. On the other hand, we work with indicators based on a consistency table. In the Third step, we apply a multi-objective methodology, specifically the compromise programming, to determine which industries have a more/less appropriate cyclical behavior according to the growth priority. Findings and Originality/value: The business cycle of the Spanish economy is positively influenced by high- and medium-tech industries, which have demonstrated their competitive capacity in international markets, and by medium- low-tech industries, with major strengths in R&D, and in survival and consolidation strategies. These results enable manufacturing industries to exert a positive effect on the business cycle that is weakened because many of them show a high correlation between

Cybersecurity for industry 4.0 analysis for design and manufacturing

CERN Document Server

Schaefer, Dirk

2017-01-01

This book introduces readers to cybersecurity and its impact on the realization of the Industry 4.0 vision. It covers the technological foundations of cybersecurity within the scope of the Industry 4.0 landscape and details the existing cybersecurity threats faced by Industry 4.0, as well as state-of-the-art solutions with regard to both academic research and practical implementations. Industry 4.0 and its associated technologies, such as the Industrial Internet of Things and cloud-based design and manufacturing systems are examined, along with their disruptive innovations. Further, the book analyzes how these phenomena capitalize on the economies of scale provided by the Internet. The book offers a valuable resource for practicing engineers and decision makers in industry, as well as researchers in the design and manufacturing communities and all those interested in Industry 4.0 and cybersecurity.

Study, design and manufacture eddy current probes for industry applications

International Nuclear Information System (INIS)

Nguyen Phuc; Nguyen Van Thuy; Vuong Binh Duong; Do Minh Duc; Trinh Dinh Truong; Tran Trong Duc; Do Tung Khanh; Dang Quang Trung

2016-01-01

This study is based on the studying, designing and manufacturing of eddy current probes for industry applications. The main tasks of this study include: i) Describes the overview and classification of eddy current probes (which can be classified into three categories based on the mode of operation: absolute eddy current probe, differential eddy current probe and reflect eddy current probe); ii) Describes the three methods of probe designing and manufacturing (including experimental, analytical and numerical designs); iii) Describes the designing and manufacturing of eddy current probes for industry applications, which based on experimental and analytical methods. Based on this study, we have successfully manufactured some current probes (including absolute eddy current probe, differential eddy current probe and reflect eddy current probe) for surface and tube inspections. (author)

Understanding evolutionary processes in non-manufacturing industries: Empirical insights from the shakeout in pharmaceutical wholesaling

OpenAIRE

Adam J. Fein

1998-01-01

Although the empirical pattern of industry shakeout has been documented for many manufacturing industries, we know little about the processes by which market structure evolves in non-manufacturing service industries. This paper establishes detailed empirical observations about the consolidation of a single non-manufacturing industry, the wholesale distribution of pharmaceuticals. These observations are used to explore differences between manufacturing and wholesaling in both the patterns and ...

The economic value of LNG in the Korean manufacturing industry

International Nuclear Information System (INIS)

Park, Sun-Young; Yoo, Seung-Hoon

2013-01-01

Although LNG is an important input to industrial production for manufacturing firms, its economic value has been rarely investigated in the literature. This paper attempts to estimate the economic value of LNG in Korea's manufacturing sector by employing the concept of the value of marginal product (VMP). For this, we used data on 328 firms using LNG as an input. Two types of production functions (the Cobb–Douglas and trans-log functions) are applied. The result of the specification test indicates that the trans-log function is more appropriate for estimating the data. The output elasticity and VMP of industrial LNG are estimated to be 0.1346 and KRW 6844 (USD 6.22) per m 3 , respectively. The results have important implications for various areas of industrial LNG management. For example, any cost–benefit analysis of new projects providing industrial LNG requires information on the economic value of industrial LNG. In addition, such information is useful for the Korean government's future policies on LNG pricing. - Highlights: • We estimate the economic value of LNG in the Korean manufacturing industry. • We employ the concept of the value of marginal product (VMP). • The VMP of industrial LNG is estimated to be KRW 6844 (USD 6.22) per m 3 . • It significantly outweighs the price of industrial LNG (KRW 629.4 per m 3 )

The Near-Term Impacts of Carbon Mitigation Policies on Manufacturing Industries

OpenAIRE

Morgenstern, Richard; Shih, Jhih-Shyang; Ho, Mun; Zhang, Xuehua

2002-01-01

Who will pay for new policies to reduce carbon dioxide and other greenhouse gas emissions in the United States? This paper considers a slice of the question by examining the near-term impact on domestic manufacturing industries of both upstream (economy-wide) and downstream (electric power industry only) carbon mitigation policies. Detailed Census data on the electricity use of four-digit manufacturing industries is combined with input-output information on interindustry purchases to paint a ...

Sustainability of fiber reinforced laminate and honeycomb composites in manufacturing industries

Science.gov (United States)

Asmatulu, Eylem; Alonayni, Abdullah; Alamir, Mohammed; Rahman, Muhammad M.

2018-03-01

Fiber reinforced polymer (FRP) composites provide a lot of benefits, including strength-to-weight ratio / light weight, superior mechanical properties, low maintenance, prolonged service life, as well as corrosion, fatigue and creep resistance. However, sustainability of the FRP composites have not been studied in detail in terms of long term productions in various industries, such as aerospace, wind energy, automotive and defense. Carbon fibers are relatively expensive because of the energy intensive production systems, and lack of easy production options, which forces many companies to recycle and reuse the FRP composites in the same or different manufacturing industries. This study mainly deals with two important issues, including the disposal of composite wastes generated during the manufacturing of composite parts, and the disposal of the products at the end of their useful life. It is believed that the carbon fibers in the used composites will have still high mechanical strengths to use in different composite manufacturing after its end of life. The major manufacturing costs come from the labor and raw materials, so using the recycled carbon fibers will make sustainable composite productions in other industries. This paper presents the current status and outlook of the FRP composite recycling and re-manufacturing techniques in the same or different industries. A future vision of the FRP composites will be investigated with sustainability point of views. This study will also mention about the sustainability issues in laminate and honeycomb composites, new product design and developments and potential applications in different manufacturing industries.

Design and manufacture of densitometer using in industrial radiography

International Nuclear Information System (INIS)

Nguyen Duc Huyen; Do Minh Duc; Vu Tien Ha; Dang Thanh Dung; Nguyen Do Kien

2016-01-01

Densitometer is a small device used to determine the darkness degree of radiography film. For improving the quality of the image on the film densitometer is indispensable equipment in sector related to the image, especially in the field of industrial imaging, radiographic. In Vietnam there are hundreds of densitometer devices, distributed to over 60 companies performing work on NDT sector and other companies. However, due to lack of maintenance, calibration and repair, many devices have been damaged, or unstable operation without any technical supports from the manufacturers. Up to now, Vietnam does not have any manufacturer (domestic and/or foreign) to research and development of the Densitometer. For these reasons, the scientists of Centre for Non-destructive Evaluation (NDE) with support from Vietnam Atomic Energy Institute (VINATOM) have successfully researched and manufactured the Densitometer using in industrial radiography in 2015.The equipment has been tested in practice and showed stable performance, measurement accuracy: ± 1% 0.02D; darkness range of film: 0.00 to 4.00D; repeated measurement values : ± 0.02D. The device meets ASTM 1079-00 standard for densitometer in industry. Especially, thanks to successful domestic manufacturing, the price of the device is only 60 % compared to the same imported products. (author)

Changing Manufacturing Technology and Jobs in Defense Industries.

Science.gov (United States)

Oliver, Richard P.

1983-01-01

Provides information on the current status of computer-assisted manufacturing, current employment, and plans for new technology in three defense-related industries: aircraft, shipbuilding, and ordnance. (SK)

Sensitivity of stock market indices to oil prices: Evidence from manufacturing sub-sectors in Turkey

Directory of Open Access Journals (Sweden)

Eksi Halil Ibrahim

2012-01-01

Full Text Available Crude oil price is a critical cost factor for manufacturing industries that are of vital importance for economic growth. This study examines the relationship between crude oil prices and the indices of seven Turkish manufacturing sub-sectors over the period 1997:01-2009:12. The error correction model results reveal the long term causality from crude oil prices to chemical petroleum-plastic and basic metal sub-sectors indicating that these sub-sectors are highly sensitive to crude oil prices. We find no causal relationship for other sector indices for short or long time periods.

Implementation of 5S in Manufacturing Industry: A Case of Foreign Workers in Melaka

Directory of Open Access Journals (Sweden)

Chee Houa San

2018-01-01

Full Text Available Lean manufacturing system has been infiltrated in manufacturing sectors across the world. In fact, Lean manufacturing system is a practice which regards the use of the resources, creation of value for the end customers, and as the ways to eliminate the waste. There are several tools that can be used to eliminate the waste within the industry. This research is a study of the implementation of 5S in manufacturing industry. Despite this, the research study focused on manufacturing industry, which has been implemented 5S system in Melaka State. Although there are number of tools and technique available to help in improving the manufacturing process, however, there is only few industries could implement the tools successfully. In this research, foreign workers play a main role in implement the 5S systems as the manufacturing industry in Malaysia adopt large amount of foreign workers to work as employees. Therefore, it is important to ensure the foreign workers truly understand the concept of 5S system and adopt the best ways to implement it in order to have better performance. This research study has been proposed by the research model of the barriers to implementation of 5S in manufacturing industry among foreign workers. A several research method has been adopted to do the research, such as descriptive research design with quantitative methods, survey questionnaire and cross-sectional studies.

Are the determinants of markup size industry-specific? The case of Slovenian manufacturing firms

Directory of Open Access Journals (Sweden)

Ponikvar Nina

2011-01-01

Full Text Available The aim of this paper is to identify factors that affect the pricing policy in Slovenian manufacturing firms in terms of the markup size and, most of all, to explicitly account for the possibility of differences in pricing procedures among manufacturing industries. Accordingly, the analysis of the dynamic panel is carried out on an industry-by-industry basis, allowing the coefficients on the markup determinants to vary across industries. We find that the oligopoly theory of markup determination for the most part holds for the manufacturing sector as a whole, although large variability in markup determinants exists across industries within the Slovenian manufacturing. Our main conclusion is that each industry should be investigated separately in detail in order to assess the precise role of markup factors in the markup-determination process.

Effects of environmental factors on corporate strategy and performance of manufacturing industries in Indonesia

Directory of Open Access Journals (Sweden)

Rachmad Hidayat

2015-05-01

Full Text Available Purpose: The purpose of this study was to examine and obtain empirical evidence of the effects of external and internal environmental factors on the strategy and performance of manufacturing companies. Design/methodology/approach: This study used primary data obtained by distributing questionnaires to 150 respondents of manufacturing companies in Indonesia spreading over six major cities in Java such as Jakarta, Banten, Bandung, Yogyakarta, Semarang and Surabaya. Samples were taken by using the systematic random sampling technique. The technique was used since those major cities had different numbers of manufacturing companies. Subsequently, the feasibility of the model was tested. Several indices of model feasibility would be used to test the model developed in this structural equation model. In case of a sub-optimal model, a model modification was to be performed by adding or removing paths so that the chi-square values would decrease by the values of the index. Findings and Originality/value: Results showed that internal and external environmental factors, through the operating environments and the remote environments of manufacturing industries, jointly affected the companies’ understanding of the condition of the industrial environments to establish strategic goals in order to achieve optimal performance of manufacturing industry. Practical implications: The internal and external environmental factors through the operating and remote environments had effects on the strategy of manufacturing companies in Indonesia. However, both internal and external environments did not affect the performance of manufacturing companies in Indonesia. There was a tendency that manufacturing companies were to observe the occurring macro-economic conditions. Manufacturing industries were faced with the pressures from competition, customers and suppliers that affected companies’ revenue. Performance of manufacturing industries was more influenced by macro

Industrial conflict and its management in selected Nigerian manufacturing companies

OpenAIRE

Solaja Oludele Mayowa

2015-01-01

This study examined industrial conflict and its management strategies in selected manufacturing companies in Lagos State, Nigeria. The study utilized co-relational survey method which involves the use of structured questionnaire and personal observation to elicit information from the respondents. Participants comprised of staffs of three manufacturing companies in Lagos, Nigeria. Multistage sampling technique was employed in selecting the respondents from the three manufacturing companies und...

The Influence Of Globalisation And Modern Technological Changes On Manufacturing Industries In Libya

Directory of Open Access Journals (Sweden)

Nuri M. Triki

2017-05-01

Full Text Available Globalisation and new technologies are having an intense impact on the manufacturing industries. This is affecting business global and might demand new strategies and policies for manufacturing companies. Libya like several other countries in the Middle East and also is among the few developing African economies has been facing problems related to its productivity in industrial sector. Manufacturing industries in Libya was reared to offer better products and services as part of the government plans to reconstruct their economy and improve its industrial companies. So as to face these problems manufacturing sectors need to increase their production and they also require a clear strategy and policies towards an efficient supply chain about modern technology. A new technology is one of the improvement initiatives that can be used to enhance industrial performance competitiveness and decrease its costs by eliminating of waste and increasing added value activities. The significance of new technology and modern systems in the industrial world has enhanced in this decade because of the benefits that they bring to the factories and companies. The aims of this research is to investigate new technology strategies that will enable the Libyan manufacturing industries to shift towards an increase production and reduce its costs as well as to quantify the modern technological changes and the role of globalisation in addition to declaration of its effect on the growth additionally development of the Libyan industrial sector and competitiveness lastly moreover this survey make a recommendations to establish systems that improve the emergent needs of the national industrial sector.

Development of an ergonomics guideline for the furniture manufacturing industry.

Science.gov (United States)

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Industrial electricity demand for Turkey: A structural time series analysis

International Nuclear Information System (INIS)

Dilaver, Zafer; Hunt, Lester C.

2011-01-01

This research investigates the relationship between Turkish industrial electricity consumption, industrial value added and electricity prices in order to forecast future Turkish industrial electricity demand. To achieve this, an industrial electricity demand function for Turkey is estimated by applying the structural time series technique to annual data over the period 1960 to 2008. In addition to identifying the size and significance of the price and industrial value added (output) elasticities, this technique also uncovers the electricity Underlying Energy Demand Trend (UEDT) for the Turkish industrial sector and is, as far as is known, the first attempt to do this. The results suggest that output and real electricity prices and a UEDT all have an important role to play in driving Turkish industrial electricity demand. Consequently, they should all be incorporated when modelling Turkish industrial electricity demand and the estimated UEDT should arguably be considered in future energy policy decisions concerning the Turkish electricity industry. The output and price elasticities are estimated to be 0.15 and - 0.16 respectively, with an increasing (but at a decreasing rate) UEDT and based on the estimated equation, and different forecast assumptions, it is predicted that Turkish industrial electricity demand will be somewhere between 97 and 148 TWh by 2020. -- Research Highlights: → Estimated output and price elasticities of 0.15 and -0.16 respectively. → Estimated upward sloping UEDT (i.e. energy using) but at a decreasing rate. → Predicted Turkish industrial electricity demand between 97 and 148 TWh in 2020.

Energy resource management for energy-intensive manufacturing industries

Energy Technology Data Exchange (ETDEWEB)

Brenner, C.W.; Levangie, J.

1981-10-01

A program to introduce energy resource management into an energy-intensive manufacturing industry is presented. The food industry (SIC No. 20) was chosen and 20 companies were selected for interviews, but thirteen were actually visited. The methodology for this program is detailed. Reasons for choosing the food industry are described. The substance of the information gained and the principal conclusions drawn from the interviews are given. Results of the model Energy Resource Management Plan applied to three companies are compiled at length. Strategies for dissemination of the information gained are described. (MCW)

Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries

Energy Technology Data Exchange (ETDEWEB)

Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

1991-03-01

Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner that allows evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study, conducted by Pacific Northwest Laboratory (PNL), developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key non-manufacturing sectors. This volume presents tabular and graphical results of the historical analysis and projections for each SIC industry. (JF)

Waste reduction possibilities for manufacturing systems in the industry 4.0

Science.gov (United States)

Tamás, P.; Illés, B.; Dobos, P.

2016-11-01

The industry 4.0 creates some new possibilities for the manufacturing companies’ waste reduction for example by appearance of the cyber physical systems and the big data concept and spreading the „Internet of things (IoT)”. This paper presents in details the fourth industrial revolutions’ more important achievements and tools. In addition there will be also numerous new research directions in connection with the waste reduction possibilities of the manufacturing systems outlined.

Study on the Transformation and Upgrade of E-Commerce Application in Manufacturing Industry

Directory of Open Access Journals (Sweden)

Zhao Liang

2017-01-01

Full Text Available Under the Internet thinking, manufacturing management mode is changed, it is not depend on the scale, but in the user as the center, more dependent on the reaction rate of user requirements. As the big data, cloud computing, Internet of things technology such as the development of technology, manufacturing is from automatic to intelligent evolution, on the user's personalized customization is possible. Using Internet thinking positive development manufacturing enterprise electronic commerce application mode of transformation and upgrading of manufacturing industry plays an important role. Promoting the continued ascent of manufacturing industry informatization level, promote the transformation of the manufacturing production mode, provide greater profit space for the export of products. In industrial 4.0 mode, the user is the core of the enterprise, C2B model will be the mainstream of future manufacturing e-commerce application mode. This paper to present the sorted out the basic model of manufacturing enterprise electronic commerce application, point out the existing problems, and the computing technology, communication technology, the constant development of storage technology, such as background, puts forward the corresponding countermeasure, points out that the C2B model is the development direction of manufacturing enterprise electronic commerce application mode.

JT-60SA TF magnet industrial manufacturing preparation and qualifications

International Nuclear Information System (INIS)

Decool, P.; Cloez, H.; Gros, G.; Marechal, J.L.; Torre, A.; Verger, J.M.; Nusbaum, M.; Billotte, G.; Crepel, B.; Bourquard, A.; Davis, S.; Phillips, G.

2014-01-01

The general design of the JT-60SA toroidal field system was defined in agreement with all the participants in the project (CEA, ENEA, F4E), the detailed design was issued by the Voluntary Contributors. For the French part including the procurement of 9 of the 18 TF winding packs and their integration in the casings, an industrial contract was signed mid-2011 with Alstom (France). After agreement on manufacturing drawings and QA documentation, the manufacturing process was defined giving the guidelines for the workshop organization and the definition of the required tooling. The critical manufacturing points were identified in the process and, regarding technical requirements, have led to the definition of a set of qualification mockups. They are related to helium inlets, conductor winding and insulation, local conductor bending, electrical joint and terminal areas for the winding pack (WP), as well as winding embedding, case welding, and impregnations for WP integration in the casing. The fabrication processes have been improved and shall be qualified thanks to the manufacture and testing of 12 corresponding mockups. The successful achievement of several key mock-ups gives confidence in the feasibility of the manufacture, and their completion will give the green light to the industrial coils manufacture. (authors)

Importance of wood from planted forests for manufacturing industry

Directory of Open Access Journals (Sweden)

Victor Almeida De Araujo

2017-06-01

Full Text Available The manufactured wood products are essential to modern society, since they are made from renewable and recyclable raw material, characterizing a sustainable input. The objective of this study was to elucidate the importance of wood from planted forests in forest products manufacture of higher added value, addressing forest and wood contexts of topics related to education, resources, products, industry, government incentives, public policies and markets. Different from Europe, it was verified that Brazil does not support positively this important industrial sector, nevertheless it still presents growth potential due to range of wooden-based products. Thus, wood could reach a prominent position in Brazilian economy, if strategies and incentives were defined by rules and public policies..

[Noise hazard and hearing loss in workers in automotive component manufacturing industry in Guangzhou, China].

Science.gov (United States)

Wang, Zhi; Liang, Jiabin; Rong, Xing; Zhou, Hao; Duan, Chuanwei; Du, Weijia; Liu, Yimin

2015-12-01

To investigate noise hazard and its influence on hearing loss in workers in the automotive component manufacturing industry. Noise level in the workplace of automotive component manufacturing enterprises was measured and hearing examination was performed for workers to analyze the features and exposure levels of noise in each process, as well as the influence on hearing loss in workers. In the manufacturing processes for different products in this industry, the manufacturing processes of automobile hub and suspension and steering systems had the highest degrees of noise hazard, with over-standard rates of 79.8% and 57.1%, respectively. In the different technical processes for automotive component manufacturing, punching and casting had the highest degrees of noise hazard, with over-standard rates of 65.0% and 50%, respectively. The workers engaged in the automotive air conditioning system had the highest rate of abnormal hearing ability (up to 3.1%). In the automotive component manufacturing industry, noise hazard exceeds the standard seriously. Although the rate of abnormal hearing is lower than the average value of the automobile manufacturing industry in China, this rate tends to increase gradually. Enough emphasis should be placed on the noise hazard in this industry.

Management Practice of Supply Chain Quality Management in Service-oriented Manufacturing Industry

Directory of Open Access Journals (Sweden)

Gu Ping

2017-01-01

Full Text Available Supply chain quality management (SCQM in service-oriented manufacturing industries is needed in delivering value to customers in all process of supply chain management based on total quality management (TQM. In the paper, we identify the latest themes through reviewing prior quality management and supply chain management(SCM literature. In particular, we find manufacturing firms transform from providing products towards providing services, which means they need to go through fundamental changes especially in supply chains. We use a case study of Heilan Home to illustrate the SCQM themes and their ways in industrial practice. Based on our research, the case study, the experience of working with this firm, we propose a SCQM performance evaluation framework, as well as four strategies for other industries to improve customer satisfaction and added value. In this way can promote the transformation and upgrading of the manufacturing industry in the perspective of quality.

Endüstriyel Enformasyonun Kıbrıs Türk Endüstrisiyle Buluşması: Farkındalık ve Gereksinme Düzeyi = Confrontation of the Industrial Information with the Cyprus Turkish Industry: Awareness and the Level of Needs

Directory of Open Access Journals (Sweden)

Oktan, Ayşe

2012-01-01

Full Text Available Bu çalışmada, Kuzey Kıbrıs Türk Cumhuriyeti (KKTC ekonomisine dayalı endüstri kuruluşları üzerine, onların enformasyon ihtiyaçlarının anlaşılmasına yönelik bir araştırma yapılmıştır. Bu bağlamda ilgili kurumların mevcut durumu ve gelişimi incelenmiştir. Bunun yanında endüstriyel enformasyonun önemi üzerinde durularak, KKTC’de genel imalat ve kâğıt ürünleri ile matbaa sanayisinde endüstriyel enformasyon üzerine olan farkındalık ile endüstriyel enformasyonun gereksinme düzeyleri tespit edilmeye çalışılmıştır. / Turkish Republic of Northern Cyprus’s (TRNC economy based on the Cyprus Turkish industryand firms have been investigated in this study. The importance of industrial information also has been highlighted in the context of Cyprus Turkish industry. The awareness on general production for the paperwork industry in the frame of information industry tries to determine. Moreover, the level of information needs is determined on those sectors.

THE EFFECTS OF INTERNATIONAL ECONOMIC CRISIS ONTURKISH READY-MADE CLOTHING INDUSTRY

Directory of Open Access Journals (Sweden)

Nurgul KILINC

2012-07-01

Full Text Available THE EFFECTS OF INTERTextile and ready-made clothing sector is one of the sectors that globalize in anadvanced level due to employment it provides, value-added created by it duringthe manufacturing process and high share in export revenue.In this research, 5 international economiccrisesdetermined since the foundationof theTurkish Republic, Turkish textile and ready-made clothing sector have beenexamined depending on journal archives and export-import data.Economic crises emerged in the world between 1974 and 2008 from whichTurkey has been affected as well have been examined by document analysismethod, which is a qualitative data gathering method in this research.By this research, which has studied international economic crisesoccurredinfragile and vulnerable Turkish economy since 1974 as regards to reason, result,effects and which has aimed to detect their effects on textile and ready-madeclothing sector. It has been realised that textile and ready-made clothing sectorthat is the locomotive sector of export of Turkey is the premier sector of thesectors those are being affected initially and directly from the negativedevelopments inTurkish economy. NATIONAL ECONOMIC CRISIS ONTURKISH READY-MADE CLOTHING INDUSTRY

National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

Science.gov (United States)

Heidari, Farzin

The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

Prefabricated Construction using Digitally Integrated Industrial Manufacturing

Directory of Open Access Journals (Sweden)

Harry Giles

2012-10-01

Full Text Available The paper describes research being carried out in relation to prefabricated high density affordablehousing under a grant from the Partnership for the Advancement of Technology in Housing(PATH and the National Science Foundation (NSF in the USA. The objective is to demonstratehow a new paradigm for the conceptualization and construction of buildings can be conceivedof as an entirely factory based process that creates advantages for construction through industrialsystems technology transfer. Our approach is intended to transform design methodologythrough demonstrating how alternative construction concepts, using entirely pre-manufacturedvolumetric units, can be adopted. This involves digital modeling that facilitates parametric variationsfor creating customized prefabricated products from design conceptualization through tofinal product delivery. The paper discusses key areas under investigation in relation to a manufacturingparadigm used in the automotive industry that integrates virtual prototyping and industrialmanufacturing systems. Our research explores a type of monocoque volumetric unit prefabricatedin steel, which will be pre-finished as part of a modular factory-built approach usingindustrialized methodologies that will facilitate customized manufacture of a high quality energyefficient product for affordable housing.The paper addresses the automotive industry methods of manufacture that have served increasedautomobile performance and economics through mass production for over a century. In starkcontrast, the building industry and in particular the housing industry is still a century behind. It issuggested that a move away from tradition will require an industry wide initiative, just like HenryFord led the way with mass production. By embracing the increasing sophistication and capabilitythat digital technology offers, it is shown how digital tools are implemented towards masscustomization in house design using virtual modeling in the

Characterization of cyclical phases in the manufacturing industry in Spain

OpenAIRE

Sala, Mercè; Torres, Teresa; Farré, Mariona

2014-01-01

Purpose: The purpose of this paper is to characterize the cyclical phases of the manufacturing industry in Spain and detect which industries have more influence on the Spanish business cycle. We assume that economic growth is a priority; we are going to determine which industries have a more/less appropriate cyclical behavior according this priority. We analyze if the industries with better cyclical behavior are the ones that achieve greater co-movement with the business cycle of the Spanish...

Total quality through computer integrated manufacturing in the pharmaceutical industry.

Science.gov (United States)

Ufret, C M

1995-01-01

The role of Computer Integrated Manufacturing (CIM) in the pursue of total quality in pharmaceutical manufacturing is assessed. CIM key objectives, design criteria, and performance measurements, in addition to its scope and implementation in a hierarchical structure, are explored in detail. Key elements for the success of each phase in a CIM project and a brief status of current CIM implementations in the pharmaceutical industry are presented. The role of World Class Manufacturing performance standards and other key issues to achieve full CIM benefits are also addressed.

A review of post-modern management techniques as currently applied to Turkish forestry.

Science.gov (United States)

Dölarslan, Emre Sahin

2009-01-01

This paper reviews the effects of six post-modern management concepts as applied to Turkish forestry. Up to now, Turkish forestry has been constrained, both in terms of its operations and internal organization, by a highly bureaucratic system. The application of new thinking in forestry management, however, has recently resulted in new organizational and production concepts that promise to address problems specific to this Turkish industry and bring about positive changes. This paper will elucidate these specific issues and demonstrate how post-modern management thinking is influencing the administration and operational capacity of Turkish forestry within its current structure.

User Cost of Debt-Financed Capital in Irish Manufacturing Industry: 1985 2011

OpenAIRE

KEARNEY, IDE; ZNUDERL, NUSA

2013-01-01

PUBLISHED This paper provides estimates of the cost of debt-financed capital to Irish manufacturing industry over the period 1985 to 2011. The estimates are provided for two types of capital assets, machinery and equipment and industrial buildings. They also incorporate policy interventions aimed at influencing investment behaviour of manufacturing firms in Ireland. The results show that large capital gains recorded during the Celtic Tiger period created a downward distortion in the user c...

Customer-driven manufacturing in the food processing industry

NARCIS (Netherlands)

Donk, D.P. van

2000-01-01

Food processing industry copes with high logistical demands from its customers. This paper studies a company changing to more customer (order) driven manufacturing. In order to help decide which products should be made to order and which made to stock, a frame is developed and applied to find and

Greek-Turkish Crises since 1955. Implications for Greek-Turkish Conflict Management

Science.gov (United States)

1997-03-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS GREEK-TURKISH CRISES SINCE 1955. IMPLICATIONS FOR GREEK-TURKISH CONFLICT MANAGEMENT by...EU, WEU) have only to gain from a Greek-Turkish rapprochement. 14. SUBJECT TERMS GrEek-Turkish RElATiONS, CRiSiS MANAgEMENT, CONfLICT management 15...crises, because the intended outcome of mediation attempts has been regional stability instead of Greek-Turkish conflict management . Power mediation

Industrie 4.0: Network Formation on a Distributed Manufacturing Project

Directory of Open Access Journals (Sweden)

Luiz Fernando Cardoso dos Santos Durão

2017-09-01

Full Text Available The integration of modern internet technology and manufacturing technology, which has been denominated Industrie 4.0, allows for distributed manufacturing using additive manufacturing on a global scale with the integration of machines and processes. However, distributed manufacturing poses many challenges for standardization, quality control and management of information in different manufacturing sites. This article aims to investigate the formation of networks in distributed manufacturing projects, identifying the stake-holders and types of connections throughout the project. The methodological approach used was longitudinal action research for a distributed manufacturing project with a focus on flexible manufacturing. The central plant was located in Germany and the supplier located in Brazil, with a partnership between the Polytechnic School of the University of São Paulo and the Technical University of Darmstadt, Germany. The design and engineering that spawned the product model was developed in Germany, while the additive manufacturing site, the structure, and machinery was developed in Brazil, forming a development and distributed manufacturing network. The results showed how organized the communication and knowledge sharing was among those involved in the distributed manufacturing project, as well as an understanding of what kind of knowledge is shared among those involved.

Association between firm characteristics and corporate voluntary disclosure: Evidence from Turkish listed companies

Directory of Open Access Journals (Sweden)

Ali Uyar

2013-12-01

Full Text Available Purpose: This paper empirically investigates the factors that impact voluntary information disclosure level of Turkish manufacturing companies listed in the Istanbul Stock Exchange (ISE. Design/methodology/approach: The methodology of the study is content analysis of annual reports of the corporations listed on the ISE for the year 2010. Findings: The findings provide evidence of a positive association between voluntary information disclosure level and the variables such as firm size, auditing firm size, proportion of independent directors on the board, institutional/corporate ownership, and corporate governance. However, leverage and ownership diffusion were found to have negative significant association with the extent of voluntary disclosure. The remaining variables, namely, profitability, listing age, and board size were found to be insignificant. Research limitations/implications: Since this study was conducted solely on listed manufacturing companies, the results may not be generalizable to non-listed and non-manufacturing industries. The study has some implications for firms, auditors, investors, and regulators. All these parties play an important role in improving the transparency and disclosure practices of corporations. Originality/value: We extend previous research on the determinants of voluntary information disclosure in the emerging market context.

Türk Gemi İnşa Sanayi İşletmelerinde Muhasebe Bilgi Sistemi: Özellikli Muhasebe İşlemleri (Accounting Information System in Turkish Shipbuilding Industry: Special Accounting Applications

Directory of Open Access Journals (Sweden)

Sercan EROL

2011-01-01

Full Text Available This study is considered in an effort to analyze the accounting information system in Turkish shipbuilding industry enterprises objectively accompanied by the elements of the accounting organization which are the document, the book and the chart of accounts and to demonstrate the accounting activities which are in existence under the present circumstances in Turkey. Shipbuilding industry creates a lot of added value such as the transfer and production of new technologies, employment and foreign exchange return. It contributes to national defense needs as well. The construction of ships, dispensable to the world maritime trade, concerns many industrial fields such as steel, machinery manufacturing, electric-electronics, paint and rubber-plastic industry. The financial information is, by all means, developed through the medium of accounting information system in Turkey's shipbuilding industry which is carried out with 87 business enterprises in the aggregate and the current state of this number consists of 66 active shipyards and 21 ship dismantling institutions. With the assistance of the developments in formation and communication technologies, in our period, information is considered power and well-informed is considered powerful, and thus, the importance of information produced by the accounting information system has been increasing constantly. Within the context of this situation which also applies to the shipbuilding industry, it is becoming extremely important for the information produced by the accounting information system to be full, clear, understandable, timely, accurate, unbiased and reliable.

Firm Based Trade Models and Turkish Economy

Directory of Open Access Journals (Sweden)

Nilüfer ARGIN

2015-12-01

Full Text Available Among all international trade models, only The Firm Based Trade Models explains firm’s action and behavior in the world trade. The Firm Based Trade Models focuses on the trade behavior of individual firms that actually make intra industry trade. Firm Based Trade Models can explain globalization process truly. These approaches include multinational cooperation, supply chain and outsourcing also. Our paper aims to explain and analyze Turkish export with Firm Based Trade Models’ context. We use UNCTAD data on exports by SITC Rev 3 categorization to explain total export and 255 products and calculate intensive-extensive margins of Turkish firms.

A research on the effect of global trends in Turkish kitchen furniture sector

Directory of Open Access Journals (Sweden)

Ersin Uçar

2017-11-01

Full Text Available Through survey results, this study evaluated global trends’ effects on Turkish kitchen furniture production. The level of knowledge and difficulties of catching up with and implementing developmental trends in the Turkish kitchen furniture sector has been seen as having a structure equivalent to world standards because the level of material and technological development has been determined by four criteria: consumer demand, housing plans, technology inadequacy, and material inadequacy. According to the results, findings in this framework, consumer demand was most influential (45.4% in capturing and implementing enterprises’ trends. Evaluation results on kitchen furniture projects implemented by Turkish enterprises within the last 5 years showed that they mostly worked with models with one-lid views in cabinet-door applications (41.6%. As a result, world trends reflect the direct influence of Turkish kitchen furniture manufacturers on cabinet-door models and color preferences for kitchen units.

Industrial engineering studies for the manufacture of the ITER PF coils

International Nuclear Information System (INIS)

Libeyre, P.; Decool, P.; Guerin, O.; Perrella, M.; Bourquard, A.

2007-01-01

Industrial studies have been carried out in Europe to prepare the manufacture of the five poloidal field (PF) coils, which will be manufactured on the ITER site. A first study, carried out by Ansaldo Superconduttori, addressed the manufacturing sequence, assuming the manufacture of the PF coils inside the two buildings which will further host the cryogenic system. A second study, carried out by Alstom investigated how to achieve the manufacture of some crucial points. A new layout of the manufacturing line was proposed, aiming at manufacture of the PF2-6 coils within 36 months. A recent study performed by Alstom, assumes the manufacture of the PF coils in a single dedicated building, releasing so the constraint of meeting the deadline fixed in ITER reference scheme by the starting point of installation of the cryogenic components

A Study to Determine the Educational Needs of Industrial Technologists in the Automotive-Type Manufacturing Industries.

Science.gov (United States)

Hall, Ronald Walter

Questionnaires were used to gather data about educational needs of industrial technologists in the automotive-type manufacturing industries in the United States. Each of the 101 establishments received four questionnaires; 67 (66.3 percent) returned one or more of the questionnaires. The responses of the selected individuals were analyzed by…

On the future of safety in the manufacturing industry

OpenAIRE

Reniers, G.

2017-01-01

Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

Industrial waste management within manufacturing: a comparative study of tools, policies, visions and concepts

OpenAIRE

Shahbazi, Sasha; Kurdve, Martin; Bjelkemyr, Marcus; Jönsson, Christina; Wiktorsson, Magnus

2013-01-01

Industrial waste is a key factor when assessing the sustainability of a manufacturing process or company. A multitude of visions, concepts, tools, and policies are used both academically and industrially to improve the environmental effect of manufacturing; a majority of these approaches have a direct bearing on industrial waste. The identified approaches have in this paper been categorised according to application area, goals, organisational entity, life cycle phase, and waste hierarchy stag...

Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

Science.gov (United States)

Ma, Zhongmin; Cheng, Mengting; Wang, Mei

2017-08-01

The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

Blockchain Enhanced Emission Trading Framework in Fashion Apparel Manufacturing Industry

Directory of Open Access Journals (Sweden)

Bailu Fu

2018-04-01

Full Text Available Motivated by the recent blockchain technology originally built for bitcoin transactions, various industries are exploring the opportunities to redefine their existing operational systems. In this study, an innovative environmentally sustainable solution is proposed for the fashion apparel manufacturing industry (FAMI, which is energized by blockchain. Incorporating the Emission Trading Scheme (ETS, and a novel “emission link” system, the proposed framework exposes carbon emission to the public and establishes a feature to reduce the emissions for all key steps of clothing making. Fully compatible with Industry 4.0, blockchain provides decentralization, transparency, automation, and immutability characteristics to the proposed framework. Specifically, the blockchain supported ETS framework, the carbon emissions of clothing manufacturing life cycle, and the emission link powered procedures are introduced in detail. A case study is provided to demonstrate the carbon emission evaluation procedure. Finally, a multi-criteria evaluation is performed to demonstrate the benefits and drawbacks of the proposed system.

Estimates of the economic contributions of the bidi manufacturing industry in India.

Science.gov (United States)

Nandi, Arindam; Ashok, Ashvin; Guindon, G Emmanuel; Chaloupka, Frank J; Jha, Prabhat

2015-07-01

Bidis, the most common smoking tobacco product in India, remain largely untaxed and are subject to very few regulations to discourage their use. A major argument against tax increases is the large potential loss of economic activity and employment in the bidi industry from reduced consumption. We used a nationally representative survey of unorganised bidi manufacturing firms (n=2841) in India to estimate the economic contribution of the industry. We find that of the 35 states and union territories of India, the bidi industry operated across 17 states, with over 95% of its production concentrated in 10 states. Bidi manufacturing firms contributed 0.50% of total sales and 0.6% of the gross value added by the manufacturing economy in 2005-2006. The industry employed approximately 3.4 million full-time workers, which comprise about 0.7% of employment in all sectors. A further 0.7 million were part-time workers. Bidi workers were also among the lowest paid employees in India. The industry offered only 0.09% of all compensation provided in the manufacturing sector (organised and unorganised). Considering the relatively small economic footprint of the bidi industry in India, higher excise taxes and regulations on bidis are unlikely to disrupt economic growth at an aggregate level, or lead to mass unemployment and economic hardship among small bidi workers. On average, the economic annual output per bidi worker is about US$143, which is an order of magnitude smaller than the large economic losses from the several hundred thousand deaths due to bidi smoking per year. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry (Presentation)

Energy Technology Data Exchange (ETDEWEB)

James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-12-12

This briefing provides an overview of supply chain developments in the global wind industry and a detailed assessment of blade manufacturing considerations for U.S. end-markets. The report discusses the international trade flows of wind power equipment, blade manufacturing and logistical costs, and qualitative issues that often influence factory location decisions. To help guide policy and research and development strategy decisions, this report offers a comprehensive perspective of both quantitative and qualitative factors that affect selected supply chain developments in the growing wind power industry.

"Industrie 4.0" and Smart Manufacturing – A Review of Research Issues and Application Examples

OpenAIRE

Klaus-Dieter Thoben; Stefan Wiesner; Thorsten Wuest

2017-01-01

A fourth industrial revolution is occurring in global manufacturing. It is based on the introduction of Internet of things and servitization concepts into manufacturing companies, leading to vertically and horizontally integrated production systems. The resulting smart factories are able to fulfill dynamic customer demands with high variability in small lot sizes while integrating human ingenuity and automation. To support the manufacturing industry in this conversion process and enhance glob...

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 1

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-06-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

STRUCTURAL ALTERNATIVES OF RUSSIAN MANUFACTURING INDUSTRIES AND ARCHITECTURE OF TECHNOLOGICAL MODERNIZATION. PART 2

Directory of Open Access Journals (Sweden)

Izryadnova O. I.

2014-09-01

Full Text Available Continuing stagnation in the Russian economy makes a compelling case for structural reforms and transition to new technologies in non-financial sector. Given the backdrop of investor choice to wait out the situation and pause their investments, stagnation threatens to remain for longer. The biggest concerns are related to the slowdown in the range of high-tech non-resource manufacturing industries. These industries should become the cornerstone to foster the development of scientific, technical, and innovative potential of the country, overcoming the technical deficit, and implementation of modern technologies of the sixth technological generation. The article assesses the place and role of manufacturing industries in Russia’s economy and presents an analysis of dynamic shifts in their structure during the business cycle. The article demonstrates the results of empirical study of monitoring of innovative receptiveness of manufacturing industries. We discuss the directions of expanded cooperation between business and state. We also outline opportunities for correcting policies and tools directed at activating innovative functioning of the manufacturing sector in the view of the growth of geopolitical tensions, forms and methods of effective institutional management of the modernization of business units. It appears that the issues of investment maneuver to single out some types of economic activities, which manufacture products and services with high added value and increasing competitiveness of the Russian economy, call for the change in the model of economic development.

Perceived antecedents of marital satisfaction among Turkish, Turkish-Dutch, and Dutch couples

NARCIS (Netherlands)

Celenk, O.; van de Vijver, F.J.R.

2013-01-01

We studied mainstream couples in The Netherlands and Turkey as well as Turkish-Dutch immigrant couples to address cultural factors associated with marital satisfaction. A total of 13 Turkish (mainstream couples living in Turkey), 19 Turkish-Dutch (Turkish immigrant couples living in The

Toward industrialization: Supporting the manufacturing processes of superconducting cavities at DESY

International Nuclear Information System (INIS)

Buerger, J.; Dammann, J.A.; Hagge, L.; Iversen, J.; Matheisen, A.; Singer, W.

2006-01-01

Manufacturing high-gradient superconducting cavities for future accelerators requires detailed knowledge of the entire production process. This knowledge has to be transferred from the laboratories, which are developing the process, to industry in order to achieve reproducible results in the industrial production of large numbers of cavities. The paper introduces DESY's approach to process industrialization based on the use of an engineering data management system (EDMS)

CO2 emissions vs. CO2 responsibility: An input-output approach for the Turkish economy

International Nuclear Information System (INIS)

Ipek Tunc, G.; Tueruet-Asik, Serap; Akbostanci, Elif

2007-01-01

Recently, global warming (greenhouse effect) and its effects have become one of the hottest topics in the world agenda. There have been several international attempts to reduce the negative effects of global warming. The Kyoto Protocol can be cited as the most important agreement which tries to limit the countries' emissions within a time horizon. For this reason, it becomes important to calculate the greenhouse gas emissions of countries. The aim of this study is to estimate the amount of CO 2 -the most important greenhouse gas-emissions, for the Turkish economy. An extended input-output model is estimated by using 1996 data in order to identify the sources of CO 2 emissions and to discuss the share of sectors in total emission. Besides, 'CO 2 responsibility', which takes into account the CO 2 content of imports, is estimated for the Turkish economy. The sectoral CO 2 emissions and CO 2 responsibilities are compared and these two notions are linked to foreign trade volume. One of the main conclusions is that the manufacturing industry has the first place in both of the rankings for CO 2 emissions and CO 2 responsibilities, while agriculture and husbandry has the last place

Relationship Between Lean Production and Operational Performance in the Manufacturing Industry

Science.gov (United States)

Rasi, Raja Zuraidah R. M.; Syamsyul Rakiman, Umol; Ahmad, Md Fauzi Bin

2015-05-01

Nowadays, more and more manufacturing firms have started to implement lean production system in their operations. Lean production viewed as one of the mechanism to maintain the organisation's position and to compete globally. However, many fail to apply the lean concepts successfully in their operations. Based on previous studies, implementation of lean production in the manufacturing industry is more focused on the relationship between Lean and Operational Performance of one dimension only. Therefore, this study attempted to examine the relationship between Lean Production (LP) and Operational Performance in 4 dimensions which are quality, delivery, cost and flexibility. This study employed quantitative study using questionnaires. Data was collected from 50 manufacturing industries. The data was analysed using Statistical Package for Social Science (SPSS) 22.0. This study is hoped to shed new understanding on the concept of Lean Production (LP) in regards of Operational Performance covering the 4 dimensions.

A Preliminary Review on Economies of Scale (EOS Towards Industrialized Building System (IBS Manufacturer

Directory of Open Access Journals (Sweden)

Tajul Ariffin Syazwana

2017-01-01

Full Text Available Industrialized Building System (IBS is a potential technology to improve productivity of construction industry. Controlled production and minimum generation of construction waste are some of the benefits that can be achieved by replacing conventional construction with IBS. In business, IBS is giving a huge opportunity for manufacturer and supplier to expand their business while contributing to construction development. However, bad strategies will put the company in high risk due to higher initial capital for machines and equipment. Therefore, strategic planning for company’s growth, profit maximization, and enhancement of productivity is undeniable to ensure the success of business in construction industry. This preliminary paper is exploring associated factors that affect Economy of Scale (EOS and their relationships in catalyzing the IBS manufacturer especially precast concrete as the scope of study to continue their business in the construction industry. Thus, a framework of EOS is proposed to assist IBS manufacturers to ensure their company’s growth and stability, competitiveness in term of monopoly or an oligopoly, increasing productivity, leading constant returns to scale, and finally increasing the firm’s efficiency. The refined EOS’s conceptual framework is an important turning point to support the development of decision making tools for IBS manufacturer towards their stability and survival in this highly competitive industry.

41 CFR 101-26.702 - Purchase of products manufactured by the Federal Prison Industries, Inc.

Science.gov (United States)

2010-07-01

... manufactured by the Federal Prison Industries, Inc. 101-26.702 Section 101-26.702 Public Contracts and Property... Defense § 101-26.702 Purchase of products manufactured by the Federal Prison Industries, Inc. (a) Purchases by executive agencies of prison-made products carried in GSA supply distribution facilities must...

77 FR 64462 - Conference on International Trade Issues Facing U.S. Machinery Manufacturing Industries

Science.gov (United States)

2012-10-22

... manufacturing is one of the largest and most competitive sectors of the American manufacturing economy. The... billion in 2011. The economic impact of machinery manufacturing extends throughout the American economy... service industries. Process control and other automation technologies enable end-users to maximize the...

Decade of PV Industry R and D Advances in Silicon Module Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Symko-Davis, M.; Mitchell, R.L.; Witt, C.E.; Thomas, H.P. [National Renewable Energy Laboratory; King, R.[U.S. Department of Energy; Ruby, D.S. [Sandia National Laboratories

2001-01-18

The US Photovoltaic (PV) industry has made significant technical advances in crystalline silicon (Si) module manufacturing through the PV Manufacturing R and D Project during the past decade. Funded Si technologies in this project have been Czochralski, cast polycrystalline, edge-defined film-fed growth (EFG) ribbon, string ribbon, and Si-film. Specific R and D Si module-manufacturing categories that have shown technical growth and will be discussed are in crystal growth and processing, wafering, cell fabrication, and module manufacturing. These R and D advancements since 1992 have contributed to a 30% decrease in PV manufacturing costs and stimulated a sevenfold increase in PV production capacity.

Advanced Manufacturing Systems in Food Processing and Packaging Industry

International Nuclear Information System (INIS)

Sani, Mohd Shafie; Aziz, Faieza Abdul

2013-01-01

In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

Advanced Manufacturing Systems in Food Processing and Packaging Industry

Science.gov (United States)

Shafie Sani, Mohd; Aziz, Faieza Abdul

2013-06-01

In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

Ergonomics intervention in an Iranian television manufacturing industry.

Science.gov (United States)

Motamedzade, M; Mohseni, M; Golmohammadi, R; Mahjoob, H

2011-01-01

The primary goal of this study was to use the Strain Index (SI) to assess the risk of developing upper extremity musculoskeletal disorders in a television (TV) manufacturing industry and evaluate the effectiveness of an educational intervention. The project was designed and implemented in two stages. In first stage, the SI score was calculated and the Nordic Musculoskeletal Questionnaire (NMQ) was completed. Following this, hazardous jobs were identified and existing risk factors in these jobs were studied. Based on these data, an educational intervention was designed and implemented. In the second stage, three months after implementing the interventions, the SI score was re-calculated and the Nordic Musculoskeletal Questionnaire (NMQ) completed again. 80 assembly workers of an Iranian TV manufacturing industry were randomly selected using simple random sampling approach. The results showed that the SI score had a good correlation with the symptoms of musculoskeletal disorders. It was also observed that the difference between prevalence of signs and symptoms of musculoskeletal disorders, before and after intervention, was significantly reduced. A well conducted implementation of an interventional program with total participation of all stakeholders can lead to a decrease in musculoskeletal disorders.

Manufacturing processes in the textile industry. Expert Systems for fabrics production

OpenAIRE

Bullon, Juan; González Arrieta, Angélica; Hernández Encinas, Ascensión; Queiruga Dios, Araceli

2017-01-01

The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities pr...

Supply Chain and Blade Manufacturing Considerations in the Global Wind Industry

Energy Technology Data Exchange (ETDEWEB)

James, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goodrich, Alan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-12-12

Over the past decade, significant wind manufacturing capacity has been built in the United States in response to an increasingly large domestic market. Recent U.S. manufacturing production levels exceed anticipated near-term domestic demand for select parts of the supply chain, in part due to policy uncertainty, and this is resulting in some restructuring in the industry. Factor location decisions are influenced by a combination of quantitative and qualitative factors; proximity to end-markets is often a key consideration, especially for manufacturers of large wind turbine components. Technology advancements in the wind sector are continuing, and larger blade designs are being pursued in the market, which may increase U.S.-based manufacturing opportunities.

Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Industry

OpenAIRE

Lidia Martínez Murillo

2007-01-01

Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its char...

Export and Economic Growth in the Case of the Manufacturing Industry: Panel Data Analysis of Developing Countries

Directory of Open Access Journals (Sweden)

Emine Kılavuz

2012-01-01

Full Text Available The correlation between growth in export and economic growth, which is called “Export-led Growth Hypothesis” in the literature, is still a current issue in both the theoretical and empirical literature. In the present study, the effect of different classifications of export and import on economic growth in 22 developing countries in the 1998–2006 period was tested based on two models, via panel data analysis. According to the results of the first model, the analysis of which included variables such as high and low-tech manufacturing industry exports, investment and population, it was found that only two variables, high-tech manufacturing industry export and investment, have a positive and significant effect on growth. In addition to the first model which included the analysis of all variables, the second model investigated the effect of high and low-tech manufacturing industry imports on growth. The findings revealed that only high-tech manufacturing industry export, investment and low-tech manufacturing industry import have a positive and significant effect on growth.

A mathematical model for environmental risk assessment in manufacturing industry

Institute of Scientific and Technical Information of China (English)

何莉萍; 徐盛明; 陈大川; 党创寅

2002-01-01

Environmental conscious manufacturing has become an important issue in industry because of market pressure and environmental regulations. An environmental risk assessment model was developed based on the network analytic method and fuzzy set theory. The "interval analysis method" was applied to deal with the on-site monitoring data as basic information for assessment. In addition, the fuzzy set theory was employed to allow uncertain, interactive and dynamic information to be effectively incorporated into the environmental risk assessment. This model is a simple, practical and effective tool for evaluating the environmental risk of manufacturing industry and for analyzing the relative impacts of emission wastes, which are hazardous to both human and ecosystem health. Furthermore, the model is considered useful for design engineers and decision-maker to design and select processes when the costs, environmental impacts and performances of a product are taken into consideration.

Perceived antecedents of marital satisfaction among Turkish, Turkish-Dutch, and Dutch couples.

Science.gov (United States)

Celenk, Ozgur; van de Vijver, Fons J R

2013-01-01

We studied mainstream couples in The Netherlands and Turkey as well as Turkish-Dutch immigrant couples to address cultural factors associated with marital satisfaction. A total of 13 Turkish (mainstream couples living in Turkey), 19 Turkish-Dutch (Turkish immigrant couples living in The Netherlands), and 17 Dutch (mainstream couples living in The Netherlands) married dyads (total of 98 individuals) were independently interviewed about positive and negative characteristics of marriages, determinants of general marital satisfaction and dissatisfaction, spousal communication, marital conflict, and marital roles. Multivariate tests revealed ethnic group differences on all marriage-related domains except the conflict resolution strategies. However, univariate analyses showed differences in few themes within domains; main differences were assessed between the Turkish/Turkish-Dutch (who put more emphasis on children and economical aspects) and Dutch couples (who put more emphasis on behavior, and personality of the spouse, reciprocity, emotional sharing, and psychological roles). Turkish-Dutch couples were more similar to Turkish than to Dutch couples. Results were discussed in light of the socioeconomic development and cultural value theories, which are believed to provide a useful framework for understanding the role of culture in marital satisfaction.

Land transportation model for supply chain manufacturing industries

Science.gov (United States)

Kurniawan, Fajar

2017-12-01

Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

Decomposing Brazilian manufacturing industry dynamics in the mid-2000s: Macroeconomic factors and their sectoral impacts

Directory of Open Access Journals (Sweden)

Edson Paulo Domingues

2017-09-01

Full Text Available The manufacturing industry's loss in participation, phenomena called “deindustrialization”, has been observed for the Brazilian economy for a while and seems to have intensified from mid-2000s. However, the literature has not developed a consistent or integrated analysis of this process. We have used a detailed simulation model to identify how macroeconomic factors (such as exchange rate, labor costs, and household consumption have contributed to manufacturing dynamics. Our results indicate that the macroeconomic scenario explains a large portion of the manufacturing industry's participation loss. The rise in households consumption and investment, important factors in this period, were responsible for dampening of the pressures coming from the currency appreciation and the workforce costs, benefiting some industrial sectors, but not avoiding the manufacturings participation loss. Keywords: Manufacturing, Growth, Development, Simulations, JEL classification: O14, C68, D58

77 FR 24722 - Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes...

Science.gov (United States)

2012-04-25

...] Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes... Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food... determining whether changes in manufacturing process, including the intentional reduction in particle size to...

Strategic project selection based on evidential reasoning approach for high-end equipment manufacturing industry

Directory of Open Access Journals (Sweden)

Lu Guangyan

2017-01-01

Full Text Available With the rapid development of science and technology, emerging information technologies have significantly changed the daily life of people. In such context, strategic project selection for high-end equipment manufacturing industries faces more and more complexities and uncertainties with the consideration of several complex criteria. For example, a group of experts rather than a single expert should be invited to select strategic project for high-end equipment manufacturing industries and the experts may feel difficulty to express their preferences towards different strategic projects due to their limited cognitive capabilities. In order to handle these complexities and uncertainties, the criteria framework of strategic project selection is firstly constructed based on the characteristics of high-end equipment manufacturing industries and then evidential reasoning (ER approach is introduced in this paper to help experts express their uncertain preferences and aggregate these preferences to generate an appropriate strategic project. A real case of strategic project selection in a high-speed train manufacturing enterprise is investigated to demonstrate the validity of the ER approach in solving strategic project selection problem.

Manufacturing capability as a technological development indicator in the pharmaceutical industry

Directory of Open Access Journals (Sweden)

John Jairo Gallo Castro

2010-01-01

Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

Towards an industrial manufactured morphing trailing edge flap system for wind turbines

DEFF Research Database (Denmark)

Aagaard Madsen, Helge; Løgstrup Andersen, Tom; Bergami, Leonardo

2014-01-01

tunnel experiment in 2009 with promising results. This led in 2011 to initiation of a new research project INDUFLAP with the main aim to transfer the flap technology to industry as concerns manufacturing and testing. Three industrial partners are participating in the project. Rehau (DE) and Dansk Gummi...

Social manufacturing

OpenAIRE

Hamalainen, Markko; Karjalainen, Jesse

2017-01-01

New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

From a homemade to an industrial product : manufacturing Bulgarian yogurt

NARCIS (Netherlands)

Stoilova, E.R.

2013-01-01

Changes in yogurt production in the first half of the twentieth century were related to the transformation of dairy manufacturing through the incorporation of science and technology into the production process. The modernization of the dairy industry affected yogurt, which Bulgarians considered a

THE IMPACT OF THE MANUFACTURING INDUSTRY ON THE ECONOMIC CYCLE OF EUROPEAN UNION COUNTRIES

Directory of Open Access Journals (Sweden)

Marcel Behun

2018-03-01

Full Text Available The manufacturing industry is a key sector in many national economies and is involved in creating sustainable economic growth. At the same time, it is a sector sensitive to internal and external impacts that result in fluctuations in the economic cycle, copying its development or even outstripping the development of economic cycles. The main objective of this contribution was to identify the relationship between manufacturing and GDP, which represents the economic cycle in European Union countries. The time series of selected indicators of the manufacturing industry and GDP from the Eurostat database for Q1 2000-Q4 2016 were used for analysis purposes. An analysis of 296 time series with a quarterly periodicity from 22 EU countries (including the United Kingdom was performed. The results of analyses indicate that the processing industry is a sector with significant cyclical behavior. In most countries, production and sales in the manufacturing industry behaved as concurrent indicators, changes in production and sales almost immediately reflected in the growth or decline in GDP. Labor market indicators have been shown to be delayed cyclical indicators. Changes in the economic development of the countries have a strong impact on employment, the remuneration of employees and the number of hours worked in the sector. Strong cyclical industries must be constantly monitored, as negative changes in these sectors will automatically exacerbate the economic cycle recession. The results of our analyses represent a valuable platform for economic policy makers and regional strategic plans.

STATUS OF LEAN MANUFACTURING IMPLEMENTATION ON SECONDARY WOOD INDUSTRIES INCLUDING RESIDENTIAL, CABINET, MILLWORK, AND PANEL MARKETS

OpenAIRE

Adrian Pirraglia; Daniel Saloni; Herman van Dyk

2009-01-01

Lean Manufacturing has helped several industries to achieve operational and manufacturing excellence by increasing productivity and enhancing quality, while reducing waste and costs. However, the wood industry has been historically slow in adopting this philosophy and its many tools. In times when overseas competition has taken big portions of the traditional market share for U.S based wood industries, it has become important that companies start to take actions in order to regain competitive...

Decomposition analysis of the change of energy intensity of manufacturing industries in Thailand

International Nuclear Information System (INIS)

Chontanawat, Jaruwan; Wiboonchutikula, Paitoon; Buddhivanich, Atinat

2014-01-01

The study computes and analyses the sources of the change of energy intensity of the manufacturing industries in Thailand during the period (1991–2011) using the decomposition method. The Logarithmic Mean Divisia Index is computed and the results show that the energy intensity in the period (1991–2000) increased greatly from the increased energy intensity of each industry. In the more recent period (2000–2011) the energy intensity declined a little. However the decline was mainly from the structural change effect with negligible contribution from decreased energy intensity of each industry. The findings imply the need to balance industrial restructuring policies with efforts to reduce energy intensity for a sustainable economic development. Besides, there is much room for individual industries to improve their energy efficiency. Policies on restructuring energy prices and other non-price related measures should be devised to induce individual industries, particularly the highly energy intensive ones, to reduce their energy intensity. - Highlights: • Decomposing change of energy intensity of Thai manufacturing industries, 1991–2011. • 1991–2000 energy intensity rose due to increased energy intensity of each industry. • 2000–2011 energy intensity declined due mainly to the structural change effect. • Need to balance industrial restructuring policies to reduce energy intensity

Recent Regulatory Trends in Pharmaceutical Manufacturing and their Impact on the Industry.

Science.gov (United States)

Tabersky, Daniel; Woelfle, Michael; Ruess, Juan-Antonio; Brem, Simon; Brombacher, Stephan

2018-03-30

The pharmaceutical industry is one of the most regulated industries in Switzerland. Though the concept of good manufacturing practises (GMP) was implemented for chemical production in the early 1990s, the rules and regulations for our industry are in constant evolution. In this article we will highlight the impact of these changes to the industry using three recent guideline up-dates as examples: the implementation of ICH Q3D 'Guideline for elemental impurities', the EU-GMP Guideline Part III Chapter 'Guideline on setting health based exposure limits for use in risk identification in the manufacture of different medicinal products in shared facilities' from 01. June 2015, and the new guidelines to data integrity such as 'PIC/S 041-1 Good Practices for Data Management and Integrity in regulated GMP/GDP environments'. These examples show how scientific approaches help to modernize the control strategies for our products and increase product quality for a better patient safety. The requirements of data integrity regulations are also of interest to industries and universities not working under GxP requirements as they also support the business to improve data quality (traceability) for patent applications, and reduce risk of data falsification.

Labor Agency in the Football Manufacturing Industry of Sialkot, Pakistan

DEFF Research Database (Denmark)

Lund-Thomsen, Peter

2013-01-01

be highly gendered and tends to be more constrained than facilitated by both vertical forces (the governance of GPNs) and horizontal forces (local socio-economic and labor market contexts). This is done through a case study of labor agency in the football manufacturing industry of Sialkot, Pakistan....

Simple, cost effective & result oriented framework for supplier performance measurement in sports goods manufacturing industry

Directory of Open Access Journals (Sweden)

2011-09-01

Full Text Available The emergences of global markets have increased competition worldwide. For the Sports Goods Manufacturing Industry which is considered to be an intensive supplier base industry with limited resources to sustain in what is already a very competitive market there is a need for the entire supply chain viz. raw material and machinery suppliers and manufacturers to measure their supplier's performance to reduce business risks and revenue losses. How to design & execute a simple, cost effective & result oriented Framework for Supplier Performance Measurement for sports goods manufacturing small - medium enterprises is the main aim of this research paper.

Accounting Education Approach in the Context of New Turkish Commercial Code and Turkish Accounting Standards

Directory of Open Access Journals (Sweden)

Cevdet Kızıl

2014-08-01

Full Text Available The aim of this article is to investigate the impact of new Turkish commercial code and Turkish accounting standards on accounting education. This study takes advantage of the survey method for gathering information and running the research analysis. For this purpose, questionnaire forms are distributed to university students personally and via the internet.This paper includes significant research questions such as “Are accounting academicians informed and knowledgeable on new Turkish commercial code and Turkish accounting standards?”, “Do accounting academicians integrate new Turkish commercial code and Turkish accounting standards to their lectures?”, “How does modern accounting education methodology and technology coincides with the teaching of new Turkish commercial code and Turkish accounting standards?”, “Do universities offer mandatory and elective courses which cover the new Turkish commercial code and Turkish accounting standards?” and “If such courses are offered, what are their names, percentage in the curriculum and degree of coverage?”Research contributes to the literature in several ways. Firstly, new Turkish commercial code and Turkish accounting standards are current significant topics for the accounting profession. Furthermore, the accounting education provides a basis for the implementations in public and private sector. Besides, one of the intentions of new Turkish commercial code and Turkish accounting standards is to foster transparency. That is definitely a critical concept also in terms of mergers, acquisitions and investments. Stakeholders of today’s business world such as investors, shareholders, entrepreneurs, auditors and government are in need of more standardized global accounting principles Thus, revision and redesigning of accounting educations plays an important role. Emphasized points also clearly prove the necessity and functionality of this research.

Fundamental Theories and Key Technologies for Smart and Optimal Manufacturing in the Process Industry

Directory of Open Access Journals (Sweden)

Feng Qian

2017-04-01

Full Text Available Given the significant requirements for transforming and promoting the process industry, we present the major limitations of current petrochemical enterprises, including limitations in decision-making, production operation, efficiency and security, information integration, and so forth. To promote a vision of the process industry with efficient, green, and smart production, modern information technology should be utilized throughout the entire optimization process for production, management, and marketing. To focus on smart equipment in manufacturing processes, as well as on the adaptive intelligent optimization of the manufacturing process, operating mode, and supply chain management, we put forward several key scientific problems in engineering in a demand-driven and application-oriented manner, namely: ① intelligent sensing and integration of all process information, including production and management information; ② collaborative decision-making in the supply chain, industry chain, and value chain, driven by knowledge; ③ cooperative control and optimization of plant-wide production processes via human-cyber-physical interaction; and ④ life-cycle assessments for safety and environmental footprint monitoring, in addition to tracing analysis and risk control. In order to solve these limitations and core scientific problems, we further present fundamental theories and key technologies for smart and optimal manufacturing in the process industry. Although this paper discusses the process industry in China, the conclusions in this paper can be extended to the process industry around the world.

Manufacturers-Retailers: The New Actor in the U.S. Furniture Industry. Characteristics and Implications for the Chinese Furniture Industry

OpenAIRE

Lidia Martínez Murillo

2007-01-01

Since the 1990s the American furniture industry faces a transition period. Manufacturers, one of its most important actors made its entrance into the retail industry. This shift has had deep consequences not only for the American furniture industry as a whole, but also for other international furniture industries, especially the Chinese. The present work aims to analyze this actor based on the distinction provided by the Global Commodity Chain Theory. It stresses its characteristics, structur...

Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

Directory of Open Access Journals (Sweden)

Haftu Hailu

2017-12-01

Full Text Available The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for the 32 items and had a value of 0.642 with Bartlett's Test of Sphericity Approx. Chi-Square 4503.007, degree of freedom 496 and significance value 0.000. A factor analysis by principal components and varimax rotation was applied for finding the critical success factors. Finding designates that 32 items were merged into eight critical success factors. All the eight factors together explain for 76.941 % of the variance. Multiple regression model analysis has indicated that some of the critical success factors had relationship with success indicators. Due to constraint of time, the researcher focused only at peacock shoe manufacturing industry. Other limitation also includes the absence of any local research that shows the critical success factors at the moment.

Exploring manufacturing competencies of a two wheeler manufacturing unit

Science.gov (United States)

Deep Singh, Chandan; Singh Khamba, Jaimal; Singh, Rajdeep; Singh, Navdeep

2014-07-01

The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry.

Exploring manufacturing competencies of a two wheeler manufacturing unit

International Nuclear Information System (INIS)

Singh, Chandan Deep; Khamba, Jaimal Singh; Singh, Rajdeep; Singh, Navdeep

2014-01-01

The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry

Relative risk analysis of several manufactured nanomaterials: an insurance industry context.

Science.gov (United States)

Robichaud, Christine Ogilvie; Tanzil, Dicksen; Weilenmann, Ulrich; Wiesner, Mark R

2005-11-15

A relative risk assessment is presented for the industrial fabrication of several nanomaterials. The production processes for five nanomaterials were selected for this analysis, based on their current or near-term potential for large-scale production and commercialization: single-walled carbon nanotubes, bucky balls (C60), one variety of quantum dots, alumoxane nanoparticles, and nano-titanium dioxide. The assessment focused on the activities surrounding the fabrication of nanomaterials, exclusive of any impacts or risks with the nanomaterials themselves. A representative synthesis method was selected for each nanomaterial based on its potential for scaleup. A list of input materials, output materials, and waste streams for each step of fabrication was developed and entered into a database that included key process characteristics such as temperature and pressure. The physical-chemical properties and quantities of the inventoried materials were used to assess relative risk based on factors such as volatility, carcinogenicity, flammability, toxicity, and persistence. These factors were first used to qualitatively rank risk, then combined using an actuarial protocol developed by the insurance industry for the purpose of calculating insurance premiums for chemical manufacturers. This protocol ranks three categories of risk relative to a 100 point scale (where 100 represents maximum risk): incident risk, normal operations risk, and latent contamination risk. Results from this analysis determined that relative environmental risk from manufacturing each of these five materials was comparatively low in relation to other common industrial manufacturing processes.

Leukaemia incidence among workers in the shoe and boot manufacturing industry: a case-control study

Directory of Open Access Journals (Sweden)

Forand Steven P

2004-08-01

Full Text Available Abstract Background Previous reports have indicated an excess of leukaemia in Broome County, New York, particularly in the Town of Union. Surveillance of cancer incidence data indicates that a large proportion of these cases occurred among males ages 65 and older. Shoe and boot manufacturing has been the largest single industry in this area throughout much of the past century. Occupational studies from Europe suggest a link between leukaemia and employment in the shoe and boot manufacturing industry. However, researchers have not found a positive association between leukaemia and employment in the shoe industry among workers in the United States. Methods A matched case-control study was conducted to investigate the association between leukaemia incidence among males 65 and older and employment in the shoe and boot manufacturing industry. Thirty-six cases of leukaemia occurring between 1981–1990; among males age 65 and older; residing in the town of Union met the study case criteria. Death certificates were obtained for each of the cases. These were matched to death certificates of 144 controls on date of death and date of birth +/- 1 year. Death certificates were then examined to determine the employer and occupation of each study subject. Conditional logistic regression was used to determine the risk of leukaemia among those working in the industry. Results The risk of both leukaemia (OR = 1.47; 95% CI 0.70, 3.09 and acute myeloid leukaemia (OR = 1.19; 95% CI 0.33, 4.28 were elevated among those employed in the shoe and boot manufacturing industry, however neither was statistically significant. Conclusion The results, though suggestive of an association between leukaemia and employment in the shoe and boot manufacturing industry, were not statistically conclusive due mainly to limited study power. Several additional limitations may also have prevented the observance of more conclusive findings. Better exposure assessment, information on

Nuclear engineering training and advanced training at universities and in manufacturing industries

International Nuclear Information System (INIS)

Sauer, A.

1984-01-01

The lecture describes: the qualification of the staff of one nuclear power plant building company, the structure of university studies in the Federal Republic of Germany, in the USA and in the GDR, technical colleges, continuation studies, in-service training in the manufacturing industry, training programmes for short-term benefits, training of German and foreign operating personnel by the manufacturers, training within the framework of technology transfer. (HSCH) [de

A Swiss Manufacturer Sees the Industrial Revolution in England*

Science.gov (United States)

Buess, Heinrich

1962-01-01

I have recently come across the diaries of Johann Conrad Fischer. These diaries span six decades and cover the years of social, economic, and technological upheaval which marked the industrial revolution in England. The reader is given a picture of these years through the eyes of a Swiss manufacturer with a good perception of history, and his notes are of some value to historians. PMID:13874462

The impact of fit manufacturing on green manufacturing: A review

Science.gov (United States)

Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

2017-09-01

Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

Energy paybacks of six-sigma: A case study of manufacturing industry in India

Directory of Open Access Journals (Sweden)

Prabhakar Kaushik

2016-11-01

Full Text Available Industries, nowadays, are concerned about energy consumption and ever narrowing rules of emissions by the governments. Therefore, a race to clean; green and less energy consuming manufacturing is going on throughout the world. But in authors’ perspective, the major part of energy exploitation lies in the production of a rejected product. Therefore alongside the use of energy saving processes and machinery, industry should primarily look for rejection reduction. This, apart from energy saving and profitability, will add to the moral responsibility of every person toward nature. Here in this paper, authors describe a case study in which the increased rejection rate of a part of cycle chain assembly is controlled by the application of Six Sigma. Six Sigma, from many years has proved to be an ultimate solution when it comes to the application part in manufacturing industries. It’s very generic and easily applicable methodology has drawn tremendous positive results throughout the world. A financial gain of INR 0.267 million was yielded by implying six-sigma approach. In a move toward energy saving, the money saved by the project was used for green manufacturing to promote energy conservation.

An ARIMA-Intervention Analysis Model for the Financial Crisis in China's Manufacturing Industry

Directory of Open Access Journals (Sweden)

W.H. Ip

2009-10-01

Full Text Available Triggered by the subprime mortgage crisis in the United States (U.S., a financial tsunami has spread rapidly around the globe, from the U.S. to Europe and the rest of the world, causing the world economy to enter a recession. China is no exception, and has suffered a sharp reduction in the growth of its export and manufacturing sectors. In this paper, we attempt to model and analyze the impact of financial crisis on the manufacturing industry in China using data collected from March 2005 to November 2008 by the China Statistical Databases of the National Bureau of Statistics of China. The results indicate that China's manufacturing industry may have to tolerate a significant negative effect caused by the global financial crisis over a period of time, with its gross industrial output value declining continually throughout 2008 and 2009 before reaching a state of equilibrium. The intervention effect is described in this study as temporary but immediate and abrupt. It is found that the ARIMA-Intervention model is more precise at explaining and analyzing the intervention effects of the financial tsunami.

Profit Allocation in Fuzzy Cooperative Games in Manufacturing and Logistics Industry

Directory of Open Access Journals (Sweden)

Xiaoyan Wang

2014-05-01

Full Text Available Purpose: Alliance between manufacturing and logistics industry is a new model of the joint development of the two industries. A reasonable profit allocation mechanism is the key to ensure the stable operation of the alliance, as well as to achieve the desired objectives. Based on uncertainty of alliance expected return as well as the inherent features of the alliance, this research establishes an improved model of profit allocation in manufacturing and logistics industry alliance.Design/methodology/approach: This article studies how to introduce comprehensive correction factors to improve interval Shapley value method, which is based on the fact that had been proved by exiting studies. In this study, interval Shapley value method is first applied to calculate the initial allocation of fuzzy cooperative games. Next AHP-GEM method and fuzzy comprehensive evaluation method are incorporated. Based on those results, an improved model of profit allocation is established. After that, a case study is demonstrated the practicality and feasibility of the improved model.Findings: Profit allocation is a complex issue in fuzzy cooperative games. There’re impacts from partner risk sharing, collaborative effort market competition, innovative contribution as well as resource investment. All these factors should be involved in the profit allocation, and different factors have different weight in importance.Practical implications: The new model established in the paper is more scientific and reasonable, and more in line with the actual situation. This method also provides good incentives to each enterprise to ensure the healthy and stable development of the alliance.Originality/value: Based on alliance characteristics, this paper establishes an indicator system and a new model for profit allocation in manufacturing and logistics industry alliance, using AHP-GEM method.

Automation Architecture based on Cyber Physical Systems for Flexible Manufacturing within Oil&Gas Industry

Directory of Open Access Journals (Sweden)

Marcelo V García

2018-03-01

Full Text Available It is clear that in the next few years most of the technologies involved in the so-called Industry 4.0 will have a deep impact on manufacturing companies, including those related to Oil & Gas exploration and production. Low cost automation promotes reference architectures and development approaches aiming at increasing the flexibility and efficiency of production operations in industrial plants. In this sense, OPC UA, in addition to allowing companies to join the Industry 4.0 initiative, provides local and remote access to plant information, enabling a recognized mechanism for both, horizontal and vertical integration in a reliable, safe and efficient way. The contribution of this article is an open architecture for vertical integration based on cyber-physical production systems, configured under IEC 61499 and using OPC UA, suitable to achieve flexible manufacturing within Oil & Gas industry.

RELATIONSHIPS BETWEEN EMPLOYMENT AND GROWTH FROM INDUSTRIAL PERSPECTIVE BY CONSIDERING EMPLOYMENT INCENTIVES: THE CASE OF TURKEY

Directory of Open Access Journals (Sweden)

Emre Aksoy

2013-01-01

Full Text Available By using quarterly data this study applied Toda-Yamamoto (1995 method for the period 1988-2010 to uncover the relationship between growth and employment in aggregate and industrial respects and also to investigate the impacts of investment and employment incentives on employment for Turkish Economy. The findings showed that the relationship between growth and employment varied with the industries. The study covers ten industries and there were causalities detected for four out of ten industries, either one or two ways. For the rest six industries covered in the study, there was no causal relationship obtained. The incentives impacts on employment, similarly, vary with industries. The law numbered as 5084 had positive and statistically significant influences on social service, manufacturing, and transportation and communication industries while the law numbered as 5763 extracted positive and significant influences on energy production and distribution, and financial intermediation industries.

A study on "mobbing" in maritime field: a case study in the Turkish maritime industry.

Science.gov (United States)

Kum, Serdar; Ertas, Yildiray

2016-01-01

Nowadays, there are many reasons for people to be stressful and restless in their working environments. One of the reasons leading to this situation is known as "mobbing". The term "mobbing" means "bullying of an individual by a group". It usually happens among employees. The main effects of mobbing are the generation of stress and reduction of employee performance at work. In general, research shows that mobbing is particularly common in the public sector. The aim of this research is to understand the frequency of mobbing on employees in the Turkish maritime industry as a case study. In this study, a questionnaire survey on ship, shipyard, public and private company workers was applied to understand how often employees are exposed to mobbing. After analysing the results, it is also aimed to obtain information about the reasons and causes of mobbing, and then we can get some advice for this issue.

From technology transfer to local manufacturing: China's emergence in the global wind power industry

Science.gov (United States)

Lewis, Joanna Ingram

This dissertation examines the development of China's large wind turbine industry, including the players, the status of the technology, and the strategies used to develop turbines for the Chinese market. The primary goals of this research project are to identify the models of international technology transfer that have been used among firms in China's wind power industry; examine to what extent these technology transfers have contributed to China's ability to locally manufacture large wind turbine technology; and evaluate China's ability to become a major player in the global wind industry. China is a particularly important place to study the opportunities for and dynamics of clean energy development due to its role in global energy consumption. China is the largest coal consuming and producing nation in the world, and consequently the second largest national emitter of carbon dioxide after only the United States. Energy consumption and carbon emissions are growing rapidly, and China is expected to surpass the US and become the largest energy consuming nation and carbon dioxide emitter in coming decades. The central finding of this dissertation is that even though each firm involved in the large wind turbine manufacturing industry in China has followed a very different pathway of technology procurement for the Chinese market, all of the firms are increasing the utilization of locally-manufactured components, and many are doing so without transferring turbine technology or the associated intellectual property. Only one fully Chinese-owned firm, Goldwind, has succeeded in developing a commercially available large wind turbine for the Chinese market. No Chinese firms or foreign firms are manufacturing turbines in China for export overseas, though many have stated plans to do so. There already exists a possible niche market for the smaller turbines that are currently being made in China, particularly in less developed countries that are looking for less expensive

The industrial resurgence of Southern California? Advanced ground transportation equipment manufacturing and local economic develoment

OpenAIRE

A J Scott; D Bergman

1995-01-01

Southern California is in a deeply rooted process of economic restructuring. Much of the region's manufacturing base is made up of two groups of industries: a declining aerospace - defense sector, and a low-wage, low-skill sweatshop sector. What are the prospects for creating a growing manufacturing base focused on high-wage, high-skill industries? In this paper we examine the opportunities presented by the Los Angeles County Metropolitan Transportation Authority's S183 billion thirty-year ca...

Spring 2008 Industry Study. Manufacturing Industry

Science.gov (United States)

2008-01-01

Chamber of Commerce puts the number of U.S. manufacturing jobs lost to piracy at 750,000 (U.S. Chamber of Commerce , 2007). Interviews with...economy each year and puts millions at risk from counterfeit medicines and engine parts (U.S. Chamber of Commerce , 2007). There are, however, several...Association of Manufacturers (NAM) and the U.S. Chamber of Commerce advocate global changes to IP protection, calling for the “reform and harmonization

INNOVATIONS AS AN IMPORTANT FACTOR INFLUENCING LABOUR PRODUCTIVITY IN THE MANUFACTURING INDUSTRY

Directory of Open Access Journals (Sweden)

Marija Bušelić

2016-12-01

Full Text Available Economic science has long recognized labour productivity as an important factor of economic growth. In the uncertain conditions of increasingly fierce and complex competition, it becomes one of the key prerequisites for an adequate response to global challenges. The development of labour productivity has to be observed as a multi-dimensional process including numerous interconnected quantitative and qualitative factors, in particular human factors and technological advancement realized through investments in research and development (innovations. The analysis of labour productivity in the manufacturing industry of the selected countries, Germany and China, is performed in the context of an important influential factor – innovations, and interdependently with the economic growth of the selected countries. The research results and the conducted regression analyses indicate a superiority of German labour productivity in the manufacturing industry, which is strongly affected by considerable investments in research and development. However, the technological convergence of China as the upcoming power is increasingly important, which shows that the gap in labour productivity is decreasing, making developed countries face new challenges posed by globalization. The analysis of the interdependence of economic growth (GDP and labour productivity in the manufacturing industry points to a positive link and the conclusion that the elasticity of the GDP to changes in labour productivity is greater in China than in Germany.

INDICATORS FOR SUSTAINABILITY IN INDUSTRIAL SYSTEMS CASE STUDY: PAPER MANUFACTURING

Directory of Open Access Journals (Sweden)

Maria Emiliana Fortună

2011-12-01

Full Text Available The paper describes a framework for promoting sustainability by using indicators for sustainable production. The concept of sustainable production is described as it is viewed by various organisms actions involved in the analysis of the sustainable industrial systems.The measure of sustainability is approached considering indicators of sustainable production, addressing both their dimensions and qualitative and quantitative features.The proposed framework refines the sustainability dimension for a case study which envisages sustainability in paper manufacturing. The analysis takes into account the life cycle analysis for the considered process since the environmental impact is seen as an essential sustainability indicator. Paper recycling and reuse is associated environmental and social costs, as a preferred alternative in waste minimization hierarchy in the manufacturing of non-trees eco-friendly paper.Proactive initiatives to improve the environmental performances of production process are considered as powerful tools for improving the paper manufacturing environmental footprint.

Challenges and opportunities of fibre-reinforced polymers in additive manufacturing with focus on industrial applications

DEFF Research Database (Denmark)

Hofstätter, Thomas; Pedersen, David Bue; Tosello, Guido

2017-01-01

Functional parts made by additive manufacturing of polymers have entered the area of industrial applications in recent years providing a wide range of materials with various mechanical, thermal, and electrical properties. These additive manufacturing processes can be combined with known fibre...

Can demand-side policies stop the tobacco industry's damage? Lessons from Turkey.

Science.gov (United States)

Gultekin-Karakas, Derya

2015-01-01

Trade and investment liberalisation in the post-1980 period allowed the penetration of transnational tobacco companies into the Turkish market. State control over the market was gradually removed and tobacco farming, manufacturing, trade and consumption were reshaped in line with the needs of transnational tobacco companies. The resultant increase in product proliferation and aggressive marketing strategies led to a dramatic rise in cigarette consumption in the 1990s, making Turkey a market with one of the sharpest consumption increases in the world. While Turkey implemented demand-side tobacco control policies to reduce consumption after 1996, it continued to stimulate manufacturing and trade in a conflicting way. The Turkish case verifies that the liberalisation process facilitated by the state under the auspices of international institutions conflicts with tobacco control. Liberalisation paves the way for market expansions of transnational tobacco companies that resist tobacco control in their drive for profit. Current global tobacco control policies, with no interest in controlling manufacturing, have limited effect on consumption. The Turkish case indicates the necessity of establishing public control over tobacco manufacturing and trade from a public health perspective.

Why Should Bilingualized Dictionary of Turkish Be Used in Teaching Turkish as a Foreign Language?

Science.gov (United States)

Baskin, Sami

2018-01-01

The first person to learn Turkish as a foreign language is a Chinese woman writing Turkish love letters for her exiled husband in the 4th century. However, we do not know much about how this woman learned Turkish. The known history of teaching Turkish as a Foreign Language goes back to the first concrete material produced for this process. They…

Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

OpenAIRE

Haftu Hailu; Abdelkadir Kedir; Getachew Bassa; Kassu Jilcha

2017-01-01

The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for th...

New developments in coordinate measuring machines for manufacturing industries

Directory of Open Access Journals (Sweden)

Hammad Mian S.

2014-01-01

Full Text Available There have been substantial improvements in measurement systems in order to meet fluctuating market demands. This rapid change and development in measurement technology has primarily been governed by demands of accuracy and precision from aerospace, automotive and other manufacturing industries. Coordinate measuring machines (CMMs available with different technologies and configurations has efficiently been fulfilling customer demands for more than a decade. Though, current CMMs can meet needs of rapid and increased demands of customers to a greater extent but still there is lot of scope for improvement and development in CMMs. The globalization of manufacturing has resulted in development of variety of complex products and miniaturization of mechanical components. The technology of micro/nano-scale 3D measurement is still a bottleneck for industries. Therefore, precise and accurate system which is flexible enough to deal with complexities of parts and micro & nano range products has to be investigated. In this paper, comprehensive review concerning CMMs with capabilities to measure micro/nano features has been presented. This work has also discussed different methods to estimate measurement uncertainty, as well as performance evaluation of CMMs. Moreover, novel concepts such as intelligent CMM, multi-sensor CMM, virtual CMM have been presented.

Trends in innovation activities in manufacturing industries across development echelons

Directory of Open Access Journals (Sweden)

Abdullah M. Khan

2017-07-01

Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

Directory of Open Access Journals (Sweden)

Marcin Puziak

2017-06-01

Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

Low back pain and lumbar angles in Turkish coal miners

Energy Technology Data Exchange (ETDEWEB)

Sarikaya, S.; Ozdolap, S.; Gumustas, S.; Koc, U. [Zonguldak Karaelmas University, Zonguldak (Turkey). Faculty of Medicine

2007-02-15

This study was designed to assess the incidence of low back pain among Turkish coal miners and to investigate the relationship between angles of the lumbar spine and low back pain in coal miners. Fifty underground workers (Group I) and 38 age-matched surface workers (Group II) were included in the study. All the subjects were asked about low back pain in the past 5 years. The prevalence of low back pain was higher in Group I than in Group II (78.0%, 32.4%, respectively, P {lt} 0.001). The results of the study showed that low back pain occurred in 78.0% of Turkish coal miners. Although the nature of the occupation may have influenced coal miners' lumbar spinal curvature, lumbar angles are not a determinant for low back pain in this population. Further extensive studies involving ergonomic measurements are needed to validate our results for Turkish coal mining industry.

Final Rule: NESHAP for the Portland Cement Manufacturing Industry: Alternative Monitoring Method

Science.gov (United States)

EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

Impact of Employment Agglomeration on Patented Innovation in U.S. Manufacturing Industries from 1986 to 2008

Directory of Open Access Journals (Sweden)

Abdullah M. Khan

2014-10-01

Full Text Available This paper examines impact of employment agglomeration in fifteen U.S. manufacturing industries on their innovation activities measured by patent count. A count data model is employed in regressing patent count on employment agglomeration measures, measure of scale, and some control variables. Measures of employment agglomeration and market concentration are found to have negative impacts on innovation in U.S. manufacturing industries. Two agglomeration proxies -Gini index and Ellison-Glaeser index have a negative influence on U.S. patented innovation for the study period. This result implies that the external benefit of spatial agglomeration of similar firms has waned down. The impact of market concentration is also found to be a negative factor for innovation. This result implies that firms with larger plant size are less innovative than those with smaller plant size. Impact of ‘share of workers with post graduate degrees’ on innovation was found to be a positive but statistically not significant factor for innovation. The ‘goods pooling’ determinant displayed negative influence on innovation. These results are mostly consistent across fifteen manufacturing subsectors. Rising energy cost is found to be one of the most significant deterrents of innovation whereas, ethnic diversity is found to be a significant facilitator of it. Results of this research lend support in favor of regional economic development policies that promote coagglomeration of various interdependent and complementary industries and small scale industries, and supports ethnic diversity to spur innovation in U.S. manufacturing industries.

Innovation and technical efficiency in Malaysian family manufacturing industries

OpenAIRE

Susila Munisamy; Edward Wong Sek Khin; Chia Zi Fon

2015-01-01

This study investigates the technical efficiency for each industry in the Malaysian manufacturing sector is estimated by using Data Envelopment Analysis (DEA). In order to pursue a balance of innovation between long-term and short-term performance strategy, we integrate the Balance Scorecard (BSC) approach with DEA. Furthermore, this paper looks at the determinants of efficiency using the Tobit regression model. In measuring the level of firms’ efficiency and innovation, the wood and wood b...

Development and validation of resource flexibility measures for manufacturing industry

Directory of Open Access Journals (Sweden)

Gulshan Chauhan

2014-01-01

Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

2001 Industry Studies: Advanced Manufacturing

Science.gov (United States)

2001-05-28

oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

Industrial Production and Professional Application of Manufactured Nanomaterials-Enabled End Products in Dutch Industries: Potential for Exposure

NARCIS (Netherlands)

Bekker, C.; Brouwer, D.H.; Tielemans, E.; Pronk, A.

2013-01-01

Background: In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the

Productivity and Openness: Firm Level Evidence in Brazilian Manufacturing Industries

OpenAIRE

Wenjun Liu; Shoji Nishijima

2012-01-01

This study investigates the productivity of Brazilian manufacturing industries, particularly addressing the influence of liberalization on productivity. We first calculate total factor productivity (TFP) by estimating the stochastic frontier production function and the inefficiency determination equation simultaneously. Then TFP growth rates are regressed on openness-related variables and other firm characteristics. The results show that firm openness to the world is a crucial determinant of ...

Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

Science.gov (United States)

Mahmood, Khurram; Haroon, General

2012-11-01

Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

Competitive manufacturing strategies for the manufacturing industries in Turkey

OpenAIRE

Ulusoy, Gündüz; Ulusoy, Gunduz

2003-01-01

In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

Investigation of the prominent barriers to lean manufacturing implementation in Malaysian food and beverages industry using Rasch Model

Science.gov (United States)

Khusaini, N. S.; Ismail, A.; Rashid, A. A.

2016-02-01

This paper presents a preliminary study on the prominent barriers to lean manufacturing implementation in Malaysian Food and Beverages Industry. A survey was carried out to determine the most prominent barriers of lean manufacturing implementation that are currently being faced in this industry. The amount of barriers identified for this study is twenty seven. Out of 1309 available organizations, a total of 300 organizations have been randomly selected as respondents, and 53 organizations responded. From the variable map, the analysis shows that, the negative perception towards lean manufacturing top the list as the most agreeable barrier, while the technical barriers came after it. It can also be seen from the variable map that averagely, lack of vision and direction is the barrier that is being faced. Finally, this is perhaps the first attempt in investigating the prominent barriers to Lean Manufacturing implementation in Malaysian food and beverages industry using Rasch Model.

Software defined networking firewall for industry 4.0 manufacturing systems

Directory of Open Access Journals (Sweden)

Akihiro Tsuchiya

2018-04-01

Full Text Available Purpose: In order to leverage automation control data, Industry 4.0 manufacturing systems require industrial devices to be connected to the network. Potentially, this can increase the risk of cyberattacks, which can compromise connected industrial devices to acquire production data or gain control over the production process. Search engines such as Sentient Hyper-Optimized Data Access Network (SHODAN can be perverted by attackers to acquire network information that can be later used for intrusion. To prevent this, cybersecurity standards propose network architectures divided into several networks segments based on system functionalities. In this architecture, Firewalls limit the exposure of industrial control devices in order to minimize security risks. This paper presents a novel Software Defined Networking (SDN Firewall that automatically applies this standard architecture without compromising network flexibility.   Design/methodology/approach: The proposed SDN Firewall changes filtering rules in order to implement the different network segments according to application level access control policies. The Firewall applies two filtering techniques described in this paper: temporal filtering and spatial filtering, so that only applications in a white list can connect to industrial control devices. Network administrators need only to configure this application-oriented white lists to comply with security standards for ICS. This simplifies to a great extent network management tasks. Authors have developed a prototype implementation based on the OPC UA Standard and conducted security tests in order to test the viability of the proposal. Findings: Network segmentation and segregation are effective counter-measures against network scanning attacks. The proposed SDN Firewall effectively configures a flat network into virtual LAN segments according to security standard guidelines. Research limitations/implications: The prototype implementation still

SMEs in the Philippine Manufacturing Industry and Globalization: Meeting the Development Challenges

OpenAIRE

Aldaba, Rafaelita M.

2008-01-01

In recognition of their substantial contribution to the economy both in terms of number of enterprises and workers, the Philippine government has put in place a number of policies and programs designed specifically to boost SME productivity and competitiveness in the country. However, the performance of SMEs in the last decade has not been vigorous enough to boost the Philippine manufacturing industry. As such, the deepening of high technology industries in terms of the creation of backward l...

Dynamics of vendor innovation capability: Evidence from the Electronics Manufacturing Services industry

DEFF Research Database (Denmark)

Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

2012-01-01

and innovation. The first is the realization that vendor capabilities have been recognized as one of the most important factors for the success of outsourcing. The second refers to the fact that, even though innovation capability is required, vendors are still being selected, and their performance evaluated......, by traditional manufacturing capabilities, such as cost, quality, delivery, and flexibility. Taking a vendor’s perspective in outsourcing, we develop and present a conceptual framework for studying vendor innovation capability. We propose to test this framework in the Electronic Manufacturing Services Industry....

Review of data mining applications for quality assessment in manufacturing industry: support vector machines

Directory of Open Access Journals (Sweden)

Rostami Hamidey

2015-01-01

Full Text Available In many modern manufacturing industries, data that characterize the manufacturing process are electronically collected and stored in databases. Due to advances in data collection systems and analysis tools, data mining (DM has widely been applied for quality assessment (QA in manufacturing industries. In DM, the choice of technique to be used in analyzing a dataset and assessing the quality depend on the understanding of the analyst. On the other hand, with the advent of improved and efficient prediction techniques, there is a need for an analyst to know which tool performs better for a particular type of dataset. Although a few review papers have recently been published to discuss DM applications in manufacturing for QA, this paper provides an extensive review to investigate the application of a special DM technique, namely support vector machine (SVM to deal with QA problems. This review provides a comprehensive analysis of the literature from various points of view as DM concepts, data preprocessing, DM applications for each quality task, SVM preliminaries, and application results. Summary tables and figures are also provided besides to the analyses. Finally, conclusions and future research directions are provided.

The Impact of Soft Factors on Quality Improvement in Manufacturing Industry

Science.gov (United States)

Chan, Shiau Wei; Fauzi Ahmad, Md; Kong, Mei Wan

2017-08-01

Nowadays, soft factors have become the key factors of success in quality improvement of an organisation. Many organisations have neglected the importance of soft factors, this may influence the organisational performance. Hence, the purpose of this research is to examine the impact of soft factors on quality improvement in manufacturing industries. Six hypotheses were examined while considering six dimensions of soft factors including management commitment, customer focus, supplier relationship, employee involvement, training and education, and reward and recognition that have a positive impact on quality improvement. In this study, eighty one managers from the quality department were randomly selected in the manufacturing industry in Batu Pahat, Johor. The questionnaires were distributed to them. The researcher analysed the quantitatively collected data using descriptive analysis and correlation analysis. The findings of this study revealed that all soft factors are correlated to the quality improvement in an organisation with a high significant value but the regression analysis shows that the supplier relationship and employee involvement has more significant impact on quality improvement as compared to other soft factors which contributes of this study.

Tendency of Embodied Carbon Change in the Export Trade of Chinese Manufacturing Industry from 2000 to 2015 and Its Driving Factors

Directory of Open Access Journals (Sweden)

Ji Guo

2018-06-01

Full Text Available The manufacturing industry is an important part of the national industrial system, and is usually an industry with high carbon content. However, few studies have been carried out on the total amount, structure and the trend of the embodied carbon emission in the international trade of the Chinese manufacturing industry. Based on the input–output method, the thesis proposes the coefficient of direct carbon emission and complete carbon emission and a method for calculating the embodied carbon of the export trade. It also calculates the coefficient of direct carbon emission and complete carbon emission for the Chinese manufacturing sector from 2000 to 2015 and breaks down the embodied carbon change of export trade in the manufacturing industry to a technological effect, structural effect and scale effect by using the method of structural decomposition. Several inspiring conclusions could be drawn from the thesis. For example: (1 the coefficient of both the direct carbon emission and the complete carbon emission has been decreasing significantly, indicating the achievements of the energy saving and emission reduction of the Chinese manufacturing industry. (2 The embodied carbon emission from the manufacturing exports remains high and presents a rising tendency. The main sectors that export the embodied carbon includes “S10 mechanical equipment and instruments”, “S9 metal products”, “S6 chemical industry”, etc., which should be the key sectors on reducing embodied carbon in exports. (3 The driving force of the embodied carbon exports lies in the scale effect of the manufacturing industry, on which the technical effect of the industry has a significant negative effect. The structural effect should have a positive influence that takes on a rising tendency; generally, this effect is only two-thirds of the scale effect. Finally, the corresponding policy suggestions have been made.

The study of populations of hazelnut c. Avelana L. and Turkish hazelnut C. Colurna L. and their selection

Directory of Open Access Journals (Sweden)

Miletić Rade

2007-01-01

Full Text Available Properties of populations of hazelnut C. avelana L. and Turkish hazelnut C. colurna L. in different regions of Serbia were studied over 1998 - 2005. Round-fruit selections suitable for candy industry were concurrently singled out. Populations of hazelnut and Turkish hazelnut are characterized by small or medium large fruits with round shape index and kernel index ranging from 0.77 - 0.89 and 0.78 - 0.84 respectively. Singled out selections of hazelnut and Turkish hazelnut have averagely medium large fruits and kernel. Round shape index of fruits and kernel of hazelnut amount to 0.98 (1.01 - 0.91 and 0.99 (1.00 - 0.96 respectively, whereas the same parameter in Turkish hazelnut amounts to 0.99 (0.99 - 0.97 and 0.98 (0.98 - 0.97. Average fruit weight of the singled out selections is 1.79 g (hazelnut and 1.74 g (Turkish hazelnut. Average kernel mass is 0.75 - 0.70 g. i.e. kernel ratio in hazelnut and Turkish hazelnut amounts to 41% and 40.2% respectively. The mineral matter content in the kernel of the selections amounted to 2.4% and 2.3% respectively. Raw proteins content ranged from 13.8% - 12.4% respectively, and oil content ranged from 47.7 - 50.2% respectively. The majority of indicators under in situ conditions suggest that all selections singled out from the population deserve attention with objective of more intensified propagation and wider introduction into commercial production. It particularly refers to the round shaped kernel which is the most suitable for the candy industry. .

The practice and perception of precautionary allergen labelling by the Australasian food manufacturing industry.

Science.gov (United States)

Zurzolo, G A; Peters, R L; Koplin, J J; de Courten, M; Mathai, M L; Tye-Din, J A; Tang, M L K; Campbell, D E; Ponsonby, A-L; Prescott, S L; Gurrin, L; Dharmage, S C; Allen, K J

2017-07-01

The precautionary allergen labelling (PAL) and Voluntary Incidental Trace Allergen Labelling (VITAL ® ) tools were designed by industry to assist consumers with selecting safe foods for consumption. However, a sizeable proportion of food products bear no label, and it is unclear whether these products are free from allergens and therefore safe to consume or have simply not undergone a risk assessment and therefore remain unlabelled for that reason. To assess the prevalence of unlabelled products that have undergone a risk assessment process and to examine the factors influencing industry's uptake of the VITAL ® process. A web-based questionnaire was distributed to Australasian food and grocery manufacturers. One hundred and thirty-seven Australasian manufacturers were contacted, and 59 questionnaires were returned (response rate: 43%). The respondents represented 454 different manufacturing sites. Manufacturers reported that 23% (95% CI 19-28) of products (n=102/434) that had been through the VITAL ® risk assessment process had no PAL statement on the label. 34% (95% CI 30-38), (n=204/600) of products that had undergone another (non-VITAL ® ) risk assessment process had no PAL statement. In examining the factors that influenced industry's uptake of the VITAL ® process, 25 manufacturers reported on factors that influenced the uptake of the VITAL ® process, 76% (CI 95% 55-91) reported that VITAL ® was an effective tool because it was based on science; 52% (CI 95% 31-72) reported that it was too time-consuming and 36% (CI 95% 18-57) identified a concern with it not being endorsed by the government. Currently, we estimate that at least 30% of products may have been through a risk assessment process and yet bear no PAL statement on the label. Permissive labelling could be incorporated onto these products if they have been assessed to be safe for consumption. © 2017 John Wiley & Sons Ltd.

A research on the preferences of material and size in the Turkish kitchen furniture industry

Directory of Open Access Journals (Sweden)

Tuncer Dilik

2017-11-01

Full Text Available This study intended to investigate the interaction developing rapidly through the impact of globalization experienced in every field on the material and size preferences of the kitchen furniture sector. The results of the survey conducted on the Turkish kitchen furniture manufacturers were evaluated within the framework of the international kitchen trends. As a result it was seen that the most preferred kitchen area was between 8 and 11 m2 regarding the distribution of the kitchen areas in Turkey. A tendency of using MDF in the production of the kitchen cabinets was observed with 61.8% in relation with the body material preferred to be used in the kitchen furniture sector. The preferred body sizes of the kitchen cabinet was determined by considering the width and height preferences of both the upper and lower cabinets, the size of 61-90 cm seemed to be the most preferred sizes both for the upper and lower cabinets. According to the height, 72 cm size was found to be the most preferred size. While the most preferred size among the cellar cabinets was determined to be smaller than 60 cm, its height was revealed to be bigger than 200 cm. The most preferred kitchen furniture base was detected to be 12 cm.

Industry 4.0: Reality, Future or just Science Fiction? How to Convince Today's Management to Invest in Tomorrow's Future! Successful Strategies for Industry 4.0 and Manufacturing IT.

Science.gov (United States)

Gentner, Stephan

Manufacturing IT and Industry 4.0 is the Fourth Industrial Revolution with a potential of 12 bn Euros in Germany's chemicals industry. But Switzerland is currently the best prepared of all countries in Europe. Many of the ideas are still very vague. This article discusses how to identify what is already reality, which ideas might become reality in the future and which ideas will stay science fiction. As projects in Manufacturing IT and Industry 4.0 are different from classical technical projects other strategies, for example agile project management, are necessary to secure success.

Directory of the manufacturers and suppliers for the French wind power industry

International Nuclear Information System (INIS)

2010-11-01

With over 5, 660 MW installed in end-2010, France ranks fourth in Europe, behind Germany, Spain and Italy. The wind power industry currently employs almost 11, 000 people in France throughout the value chain. In 2009, the first edition of this directory listed over one hundred companies working in around twenty different areas. Encouraged by these initial positive results, and with the help of ADEME, the French syndicate for renewable energies (SER) asked Capgemini Consulting to undertake a study to identify and raise awareness among French industrials likely to enter into the wind energy market. The French Ministry for Ecology, Energy, Sustainable Development and the Sea, along with the Ministry for the Economy, Finance and Employment, were involved in the work. 400 companies were questioned as part of the study. Over 150 replies testified to the dynamic character of the wind power market in France and overseas, and the opportunities for diversification that it represents for traditional industries like metallurgy, aeronautics, defence and shipyards, etc. The study led to the creation of the initiative Windustry France, which currently groups over 300 companies either active in the French wind power market or set to enter it. Windustry France is a showcase of the industrial know-how that can be used in the wind power industry both onshore and offshore. It includes local set-ups developed around major fields of activity (e.g. car industry, aeronautics, mechanics, etc.) and industrial port zones (Dunkerque, Rouen/Le Havre, Brest, Nantes Saint-Nazaire, Bordeaux, etc.). Several ministries, regional stakeholders and authorities are also involved (local authorities, Regional directorates for industry, research and the environment (DReal) networks and chambers of commerce and industry), all of which contribute to making Windustry France a collective approach to industrial policy. The 2010-2011 edition of the directory of manufacturers and suppliers for the wind power

NESHAP for the Portland Cement Manufacturing Industry: Fact Sheets for Actions Since 2015

Science.gov (United States)

EPA is extending its approval for the use of an alternative method to show compliance with hydrogen chloride (HCl) emissions limits in the National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing Industry

PROSPECTS OF APPLICATION OF THE CONCEPTOF QUICK RESPONSE MANUFACTURING AT THE RUSSIAN INDUSTRIAL ENTERPRISES

Directory of Open Access Journals (Sweden)

Ch. V. Shipilova

2016-01-01

Full Text Available This article is devoted to research of such concept of the organization of production, as Quick Response Manufacturing or Quick-response production, at the center which, time of implementation of the order is put. Today domestic producers are compelled to function in new conditions, competing with a great number of players of the global market, as a result the emphasis on timely implementation of orders and a tendency of reduction of time of production will allow to reach competitive advantages. Fundamental aspects of Quick Response Manufacturing within functioning of the enterprise of branch are considered, and also the essential lack of this concept is revealed.The purpose / objectives. The purpose of article is research of the economic contents of the concept of the organization of production Quick Response Manufacturing and area of its use at the modern industrial enterprises. Article tasks: to investigate economic contents of the concept of Quick Response Manufacturing, to reveal its features and scopes in the modern industry.Methods. A methodical basis of this article are comparative methods of the analysis.Results. The economic contents of the concept of Quick Response Manufacturing are investigated. Four main key aspects which are the cornerstone of this concept are investigated: time force, organizational structure of the enterprise, system dynamics and possibilities of its application in scales of all enterprise. Components of positive work of system dynamics of the industrial enterprise are revealed, the trend of critical process of production is built. Considering that modern conditions demand from the enterprises to react, adapt quickly for the changing conditions, the factor of time plays an important role. Therefore the concept of QRM has rather perspective character, focusing attention on time of implementation of the order, in that communication that this parameter is one of key both for the enterprise, and for increase of its

Scalable manufacturing of biomimetic moldable hydrogels for industrial applications

Science.gov (United States)

Yu, Anthony C.; Chen, Haoxuan; Chan, Doreen; Agmon, Gillie; Stapleton, Lyndsay M.; Sevit, Alex M.; Tibbitt, Mark W.; Acosta, Jesse D.; Zhang, Tony; Franzia, Paul W.; Langer, Robert; Appel, Eric A.

2016-12-01

Hydrogels are a class of soft material that is exploited in many, often completely disparate, industrial applications, on account of their unique and tunable properties. Advances in soft material design are yielding next-generation moldable hydrogels that address engineering criteria in several industrial settings such as complex viscosity modifiers, hydraulic or injection fluids, and sprayable carriers. Industrial implementation of these viscoelastic materials requires extreme volumes of material, upwards of several hundred million gallons per year. Here, we demonstrate a paradigm for the scalable fabrication of self-assembled moldable hydrogels using rationally engineered, biomimetic polymer-nanoparticle interactions. Cellulose derivatives are linked together by selective adsorption to silica nanoparticles via dynamic and multivalent interactions. We show that the self-assembly process for gel formation is easily scaled in a linear fashion from 0.5 mL to over 15 L without alteration of the mechanical properties of the resultant materials. The facile and scalable preparation of these materials leveraging self-assembly of inexpensive, renewable, and environmentally benign starting materials, coupled with the tunability of their properties, make them amenable to a range of industrial applications. In particular, we demonstrate their utility as injectable materials for pipeline maintenance and product recovery in industrial food manufacturing as well as their use as sprayable carriers for robust application of fire retardants in preventing wildland fires.

Elderly Turkish Migrants in Denmark

DEFF Research Database (Denmark)

Blaakilde, Anne Leonora; Petersen, Signe Sofia Gronwald; Yazici, Suzan

and a higher proportion of self-reported illness and are in higher risk of health problems and morbidity than their Danish counterparts. Furthermore, their health differences increase more by age. The research project aimed at finding possible explanations for these differences among Turkish and ethnic Danish......Elderly Turkish migrants in Denmark: Health in a life course perspective Objective According to Statistics Denmark, Turkish immigrants constitute the largest immigrant group in Denmark with 1.1% of the population (60,390 people) in 2012. They account for a higher rate of chronic ailments...... elderly people by studying the every day life of elderly Turkish migrants. Methods Qualitative interviews were carried out with 12 Turkish men and 18 women aged 54-80. The interviews had a focus on their health practices and health perceptions in a life history perspective. The interviews were...

Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

Directory of Open Access Journals (Sweden)

Jegatheswaran Ratnasingam

2016-04-01

Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

Management accounting techniques and corporate performance of manufacturing industries

Directory of Open Access Journals (Sweden)

Ardiansyah Rasyid

2017-03-01

Full Text Available This research is to investigate that some factors that affect the new adoption in management accounting techniques on the Indonesia manufacturing industries, specifically in Jakarta, Bogor, Depok, Tangerang and Bekasi regions. The research can give a clearer portrait of how some factors can significantly affect the adoption of management accounting techniques. The research used some questioners which were sent to respondents who work in manufacturing industries as a middle level management. The methods used to distribute the questioners to respondents were by door to door, by e-mail and by media telecommunication (what’s app or close relationship up to hundreds questioners. We obtained 45 respondents but we eliminated one respondent, because they are not suitable to the research requirements. The research model contains the two paths. The first path contains 7 variables that divided by six exogenous variables to affect one endogenous variable and the next path model is from the three variables, that are divided to the one mediating variable and the other one exogenous variables to affect one endogenous variable (like path modelling. The research result shows that high competition does not affect the new accounting adoption but the other five variables; cost system changing, technology changes, organization climate, consumer demand and size significantly affect the new accounting adoption. For the next path, the research finds that the new accounting adoption can significantly affect corporate performance and also corporate performance measurement perception.

Evaluation of Technological Trends and Demands of the Manufacturing Industry to a Center of R&D&I

Directory of Open Access Journals (Sweden)

Leone Peter Correia da Silva Andrade

2015-10-01

Full Text Available The manufacturing industry is fairly representative in the Brazilian economy. The research activities in technology, development and innovation promoted by technology centers are of great importance to boost the competitiveness of this segment. In this context, this work aims presenting the development of the strategic planning for a Center of R&D&I (Research & Development & Innovation, looking 20 years ahead, on a macro level, creating a master plan which summarizes the future focus areas of competence for technology research, development and innovation, coping with manufacturing trends, using a participative workshop approach. Thus, it is expected that this center offer integrated technological solutions with high added value that promote the development and competitiveness of the manufacturing industry, in the prospects for medium and long term. In order to achieve the project objectives taking the principle of strategic planning was followed. On the one hand, focus was placed on the internal perspective analyzing the current status of the Center. On the other hand, the environment of the Center (external perspective was analyzed. Matching the analysis results regarding both perspectives future competence areas were derived, according to global technological trends as well as national and local industrial demand. Thus, the competencies required to be developed by a technology center to meet the manufacturing industry over the next twenty years would be derived.

Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

International Nuclear Information System (INIS)

Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

2012-01-01

The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

Product manufacturing, quality, and reliability initiatives to maintain a competitive advantage and meet customer expectations in the semiconductor industry

Science.gov (United States)

Capps, Gregory

Semiconductor products are manufactured and consumed across the world. The semiconductor industry is constantly striving to manufacture products with greater performance, improved efficiency, less energy consumption, smaller feature sizes, thinner gate oxides, and faster speeds. Customers have pushed towards zero defects and require a more reliable, higher quality product than ever before. Manufacturers are required to improve yields, reduce operating costs, and increase revenue to maintain a competitive advantage. Opportunities exist for integrated circuit (IC) customers and manufacturers to work together and independently to reduce costs, eliminate waste, reduce defects, reduce warranty returns, and improve quality. This project focuses on electrical over-stress (EOS) and re-test okay (RTOK), two top failure return mechanisms, which both make great defect reduction opportunities in customer-manufacturer relationship. Proactive continuous improvement initiatives and methodologies are addressed with emphasis on product life cycle, manufacturing processes, test, statistical process control (SPC), industry best practices, customer education, and customer-manufacturer interaction.

Firm, Country and Macroeconomic Determinants of Capital Structure: Evidence from Turkish Banking Sector

Directory of Open Access Journals (Sweden)

Nuri Baltacı

2014-03-01

Full Text Available This study explores the significance of firm-specific, country, and macroeconomic factors in explaining variation in leverage using a sample of banks from Turkish banking sector. The analysis is based on quarterly firm-level data from Turkish banking sector in 2002–2012. We aims to contribute to the empirical capital structure literature in the following ways. Our first contribution comes from assessing the importance of firm-specific factors, country-level factors and industrial factors for capital structure decisions in Turkish banking sector. Second, we employ appropriate and advanced dynamic panel data estimators, Blundell and Bond’s (1998 generalized methods of moment’s estimators (GMM System. We find that leverage is significantly and positively associated with average industry leverage, firm size and GDP growth. We find also that leverage is significantly and negatively associated with tangibility, profitability, inflation and financial risk. The regression results for leverage are both theoretically and empirically plausible for banks in Turkey. Moreover, tangibility, profitability and GDP growth are consistent with the predictions of the pecking order theory, while firm size is consistent with the predictions of the trade-off theory. Our findings suggest that the capital structures of financial and non-financial firms are ultimately determined by the same drivers.

EUV mask manufacturing readiness in the merchant mask industry

Science.gov (United States)

Green, Michael; Choi, Yohan; Ham, Young; Kamberian, Henry; Progler, Chris; Tseng, Shih-En; Chiou, Tsann-Bim; Miyazaki, Junji; Lammers, Ad; Chen, Alek

2017-10-01

As nodes progress into the 7nm and below regime, extreme ultraviolet lithography (EUVL) becomes critical for all industry participants interested in remaining at the leading edge. One key cost driver for EUV in the supply chain is the reflective EUV mask. As of today, the relatively few end users of EUV consist primarily of integrated device manufactures (IDMs) and foundries that have internal (captive) mask manufacturing capability. At the same time, strong and early participation in EUV by the merchant mask industry should bring value to these chip makers, aiding the wide-scale adoption of EUV in the future. For this, merchants need access to high quality, representative test vehicles to develop and validate their own processes. This business circumstance provides the motivation for merchants to form Joint Development Partnerships (JDPs) with IDMs, foundries, Original Equipment Manufacturers (OEMs) and other members of the EUV supplier ecosystem that leverage complementary strengths. In this paper, we will show how, through a collaborative supplier JDP model between a merchant and OEM, a novel, test chip driven strategy is applied to guide and validate mask level process development. We demonstrate how an EUV test vehicle (TV) is generated for mask process characterization in advance of receiving chip maker-specific designs. We utilize the TV to carry out mask process "stress testing" to define process boundary conditions which can be used to create Mask Rule Check (MRC) rules as well as serve as baseline conditions for future process improvement. We utilize Advanced Mask Characterization (AMC) techniques to understand process capability on designs of varying complexity that include EUV OPC models with and without sub-resolution assist features (SRAFs). Through these collaborations, we demonstrate ways to develop EUV processes and reduce implementation risks for eventual mass production. By reducing these risks, we hope to expand access to EUV mask capability for

Strategic Roles of Manufacturing

DEFF Research Database (Denmark)

Yang, Cheng

with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

DESIGN AND MANUFACTURING OF MODULAR PARQUET FLOORING IN INDUSTRIAL SYSTEM

Directory of Open Access Journals (Sweden)

Ivan CISMARU

2014-09-01

Full Text Available The paper submits constructive options and methods to design and manufacture modular parquet flooring, as well as fastening methods in constructions. Likewise, it presents the branches of civil engineering where modular parquet flooring may be turned to profit – industrial buildings, company premises or residential premises. The turn towards the achievement of private constructions, such as individual houses, led to losing control of the modular system applied in defining the inner sizes of the constructions and implicitly to the apparition of dimensional incompatibilities between the parquet flooring and the built spaces. The paper sets out (to solve by an individualized design procedure to achieve modular parquet flooring in industrial system, in correspondence with the sizes of the inner spaces afferent to the constructions.

The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

Energy Technology Data Exchange (ETDEWEB)

Zahraee, S.M.; Chegeni, A.; Toghtamish, A.

2016-07-01

Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method. (Author)

The optimal parameter design for a welding unit of manufacturing industry by Taguchi method and computer simulation

Directory of Open Access Journals (Sweden)

Seyed Mojib Zahraee

2016-05-01

Full Text Available Purpose: Manufacturing systems include a complicated combination of resources, such as materials, labors, and machines. Hence, when the manufacturing systems are faced with a problem related to the availability of resources it is difficult to identify the root of the problem accurately and effectively. Managers and engineers in companies are trying to achieve a robust production line based on the maximum productivity. The main goal of this paper is to design a robust production line, taking productivity into account in the selected manufacturing industry. Design/methodology/approach: This paper presents the application of Taguchi method along with computer simulation for finding an optimum factor setting for three controllable factors, which are a number of welding machines, hydraulic machines, and cutting machines by analyzing the effect of noise factors in a selected manufacturing industry. Findings and Originality/value: Based on the final results, the optimal design parameter of welding unit of in the selected manufacturing industry will be obtained when factor A is located at level 2 and B and C are located at level 1. Therefore, maximum productive desirability is achieved when the number of welding machines, hydraulic machines, and cutting machines is equal to 17, 2, and 1, respectively. This paper has a significant role in designing a robust production line by considering the lowest cost and timely manner based on the Taguchi method.

Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry.

Science.gov (United States)

Lam, Carl W; Lim, Seong-Rin; Schoenung, Julie M

2011-05-15

Modern manufacturing of printed wiring boards (PWBs) involves extensive use of various hazardous chemicals in different manufacturing steps such as board preparation, circuit design transfer, etching and plating processes. Two complementary environmental screening methods developed by the U.S. EPA, namely: (i) the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and (ii) Risk-Screening Environmental Indicators (RSEI), are used to quantify geographic and chemical environmental impacts in the U.S. PWB manufacturing industry based on Toxics Release Inventory (TRI) data. Although the release weight percentages of industrial chemicals such as methanol, glycol ethers and dimethylformamide comprise the larger fraction of reported air and water emissions, results indicate that lead, copper and their compounds' releases correspond to the highest environmental impact from toxicity potentials and risk-screening scores. Combining these results with further knowledge of PWB manufacturing, select alternative chemical processes and materials for pollution prevention are discussed. Examples of effective pollution prevention options in the PWB industry include spent etchant recovery technologies, and process and material substitutions. In addition, geographic assessment of environmental burden highlights states where promotion of pollution prevention strategies and emissions regulations can have the greatest effect to curb the PWB industry's toxic release impacts. Copyright © 2011 Elsevier B.V. All rights reserved.

REVIEW OF TURKISH SCIENTIFIC TEXTS ON TEACHING TURKISH AS A FOREIGN LANGUAGE

Directory of Open Access Journals (Sweden)

Kamil İŞERİ

2017-04-01

Full Text Available The functions of the scientific texts under the informative text type are referring to the results of a research, reinterpreting certain research results, or reaching original results. When literature reviewed, it is observed that although the studies for creating scientific text have increased recently, it seems that the desired outcome is not achieved. In addition to teaching Turkish as a mother tongue, teaching it as a foreign language has also started to gain importance. For this reason, it is necessary to carry out such studies in order to increase the productivity in the field of teaching Turkish to foreigners. The aim of the study is to determine the orientations related to the rhetorical arrangement of the scientific texts on teaching of Turkish as a foreign language, which are included in the textbooks of the International Training and Education of Turkish Language Congresses as a full text and to evaluate these texts in terms of their specific functions. Findings and determinations revealed in the study are based on a corpus comprised of a total of 64 texts included in proceedings books, written in Turkish and related to teaching Turkish to foreigners. The study is structured by qualitative research method. The data were obtained by qualitative data collection techniques through document scanning and were examined within the framework of the scientific text criteria specified by Huber and Uzun (2001. Two out of 64 articles in the sample of the study revealed that none of the expected functional steps in the introduction, main and final sections were found. No work has been found that covers all of the functional steps in the introduction, main and final sections.

Application of Lean Manufacturing Tools in the Food and Beverage Industries

Directory of Open Access Journals (Sweden)

Rui Borges Lopes

2015-10-01

Full Text Available Recent years have shown an increasing use of lean manufacturing (LM principles and tools in several industrial sectors. Already a well-established management philosophy, it has shown numerous successful applications even outside production environments. This work presents the application of some LM tools, and the corresponding shift in philosophy, in two Portuguese companies of the food and beverage industries. Main implementation issues are presented and discussed; followed by the results obtained from the application of LM tools in the production system of these companies. Significant gains are obtained in both companies and, more importantly, it instills a continuous improvement culture and increases production flexibility while reducing lead times.

A decomposition analysis of CO2 emissions from energy use: Turkish case

International Nuclear Information System (INIS)

Ipek Tunc, G.; Tueruet-Asik, Serap; Akbostanci, Elif

2009-01-01

Environmental problems, especially 'climate change' due to significant increase in anthropogenic greenhouse gases, have been on the agenda since 1980s. Among the greenhouse gases, carbon dioxide (CO 2 ) is the most important one and is responsible for more than 60% of the greenhouse effect. The objective of this study is to identify the factors that contribute to changes in CO 2 emissions for the Turkish economy by utilizing Log Mean Divisia Index (LMDI) method developed by Ang (2005) [Ang, B.W., 2005. The LMDI approach to decomposition analysis: a practical guide. Energy Policy 33, 867-871]. Turkish economy is divided into three aggregated sectors, namely agriculture, industry and services, and energy sources used by these sectors are aggregated into four groups: solid fuels, petroleum, natural gas and electricity. This study covers the period 1970-2006, which enables us to investigate the effects of different macroeconomic policies on carbon dioxide emissions through changes in shares of industries and use of different energy sources. Our analysis shows that the main component that determines the changes in CO 2 emissions of the Turkish economy is the economic activity. Even though important changes in the structure of the economy during 1970-2006 period are observed, structure effect is not a significant factor in changes in CO 2 emissions, however intensity effect is.

Frontline Leaders: The Entry Point for Leadership Development in the Manufacturing Industry

Science.gov (United States)

Liu, Lucy; McMurray, Adela J.

2004-01-01

This multi-method case study examined the roles, functions, capabilities, job satisfaction, strengths, weaknesses and skill gaps of frontline team leaders working on the shopfloor in the Australian automobile industry. The study was conducted in a large automobile manufacturing company employing 4,500 employees and rated as one of the top 22…

Nanoparticle usage and protection measures in the manufacturing industry--a representative survey.

Science.gov (United States)

Schmid, Kaspar; Danuser, Brigitta; Riediker, Michael

2010-04-01

Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Noting the current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action.

Past and Present of the Chinese and Korean Trainees and Survival of a Small Manufacturing Industry

Science.gov (United States)

Nishihata, Mikio

In 1973, the author established the Nippon Bell Parts Co., Ltd. in Funabashi-city under his estimation of the advances in communication, information, semiconductor and automotive industries, then he has focused on R&D and developed the manufacturing of precise parts. During the past 30 years, he has himself experienced the importance of the mutual exchange between Japan and China and Korea, for keeping the human capability as well as for the management and the technical development to avoid a bankruptcy. The author is intentionally acting for the education of craftsmen in small and medium-sized manufacturing industries.

Unemployment and Salary Formation in the Mexican Manufacturing Industry: A Dynamic Panel Analysis

OpenAIRE

Sara G. Castellanos

2010-01-01

In this article we study the relationship between wages, unemployment and labor productivity in Mexico’s manufacturing sector. We use the data of Monthly Industrial Survey, produced by the National Institute of Statistics (INEGI), to estimate a model with the generalized method of moments for dynamic panel data of Arellano and Bond (1991). This method exploits the cross time and cross section variability of the industrial sector data, and yields consistent and efficient estimators. Results su...

Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

OpenAIRE

Tsu-Yi Hung; Yu-Ju Hsiao; Shih-Wei Wu

2014-01-01

This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The resu...

The Impact of Organizational Learning Capability on Product Innovation Performance: Evidence from the Turkish Manufacturing Sector

Directory of Open Access Journals (Sweden)

Özlem Yaşar Uğurlu

2016-02-01

Full Text Available This study aims to examine the effect of organizational learning capability on product innovation performance in the manufacturing sector using empirical data. A survey was conducted with 120 firms that were on the list of Top 1000 Firms of Turkey and registered with the Istanbul Chamber of Industry, to examine the relationship between the dimensions of organizational learning capability and the dimensions of product innovation performance. The findings of the study indicate a positive relationship between organizational learning capability and product innovation performance.

Design, manufacture and performance research of double acting hydraulic press

OpenAIRE

Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

1990-01-01

This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

Application of food safety management systems (ISO 22000/HACCP) in the Turkish poultry industry: a comparison based on enterprise size.

Science.gov (United States)

Kök, M Samil

2009-10-01

The objectives of this study were to determine the extent of food safety management systems (ISO 22000/HACCP) implementation in the Turkish poultry industry. A survey was conducted with 25 major poultry meat producers, which account for close to 90% of national production, and a comparison was made between the procedures of small-to-medium enterprises (SMEs) and large firms (LFs). The survey revealed that there is a high level of application of ISO 22000 (72%), which is seen to aid the export market. LFs were shown to adopt more stringent schemes and make better use of governmental support services than SMEs. LFs were also more aware of, and able to deal with, risks from a greater range of contaminants.

Turkish delight

International Nuclear Information System (INIS)

Woodford, Julian

1999-01-01

This article focuses on the opening up of the Turkish energy markets to international investment in an effort to join the European Union. The implementation of the EU's Directive on internal electricity markets, the benefits gained by globalisation, the growth in the Turkish electricity market, the control of power supply and distribution, generating capacity, the infrastructure needed to satisfy demand, moves towards privatisation, and joint venture with local companies are discussed. Estimates of Turkey's power demand, its strategic location, and foreign companies interested in the power market are considered. (uk)

A case study on Simulation and Design optimization to improve Productivity in cooling tower manufacturing industry

Science.gov (United States)

Pranav Nithin, R.; Gopikrishnan, S.; Sumesh, A.

2018-02-01

Cooling towers are the heat transfer devices commonly found in industries which are used to extract the high temperature from the coolants and make it reusable in various plants. Basically, the cooling towers has Fills made of PVC sheets stacked together to increase the surface area exposure of the cooling liquid flowing through it. This paper focuses on the study in such a manufacturing plant where fills are being manufactured. The productivity using the current manufacturing method was only 6 to 8 fills per day, where the ideal capacity was of 14 fills per day. In this plant manual labor was employed in the manufacturing process. A change in the process modification designed and implemented will help the industry to increase the productivity to 14. In this paper, initially the simulation study was done using ARENA the simulation package and later the new design was done using CAD Package and validated using Ansys Mechanical APDL. It’s found that, by the implementation of the safe design the productivity can be increased to 196 Units.

Tribology in Manufacturing Technology

CERN Document Server

2013-01-01

The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

Local outcomes of globalization: manufacturing decline and labor response in the Philippine garment and shoe industries

NARCIS (Netherlands)

Beerepoot, N.

2008-01-01

In the past few decades, globalisation has led to major international shifts in labour intensive manufacturing generating ‘winners’ and ‘losers’ among countries, industries and workers. This paper uses case studies of the shoe industry in Marikina City and the garments sector in Metro Manila in

A NEW Curriclum for Manufacturing & Industrial Engineering and Engineering Management for Bs and Ms Degrees

OpenAIRE

SARI, Zaki

2012-01-01

This paper deals with the design and implementation of a new curriclum for manufacturing & industrial engineering and engineering management for bachelor and master degrees at tlemcen university, algeria

Women workers in male dominated industrial manufacturing organisations: Contrasting workplace case studies from Australia

OpenAIRE

Burgess, John; Henderson, Lindy; Strachan, Glenda

2005-01-01

This study compared women's roles, expectations and experiences in two comparable, male dominated industrial manufacturing companies in Australia. Both organisations are subject to legislated equal opportunity program and reporting requirements. The research was conducted to examinee the differences between what is submitted in their EEO reports and the experience of women workers in the organisations. Good jobs and poor jobs existed in the same legislative and industrial framework and in the...

77 FR 14022 - Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation-Derived...

Science.gov (United States)

2012-03-08

...] Guidance for Industry on Chemistry, Manufacturing, and Controls Information--Fermentation-Derived... (CMC) Information-- Fermentation-Derived Intermediates, Drug Substances, and Related Drug Products for... to submit to support the CMC information for fermentation-derived intermediates, drug substances, and...

Safety practices in Jordanian manufacturing enterprises within industrial estates.

Science.gov (United States)

Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

2013-01-01

This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

Turizm Sektörünün Türkiye Ekonomisi Üzerindeki Etkisinin Girdi-Çıktı Tablosu Yardımıyla Değerlendirilmesi(The Evaluatin of Tourism Sector’s Effect on Turkish Economy Trough Input-Output Table

Directory of Open Access Journals (Sweden)

İlkay DİLBER

2007-01-01

Full Text Available Tourism industry is one of the most important industries in the economic development of Turkish economy. In addition to its usual effects on GDP, tourism revenues can help to reduce the current account deficits. Thus, in order to determine the importance of tourism industry for the Turkish economy, this study uses input-output tables of the Turkish tourism industry in 1998. Calculating the industry’s value added and factor intensity and understanding whether the sector is subject to the dynamic external economies are extremely important for future policy suggestions.

Accounting Education Approach in the Context of New Turkish Commercial Code and Turkish Accounting Standards

OpenAIRE

Cevdet Kızıl; Ayşe Tansel Çetin; Ahmed Bulunmaz

2014-01-01

The aim of this article is to investigate the impact of new Turkish commercial code and Turkish accounting standards on accounting education. This study takes advantage of the survey method for gathering information and running the research analysis. For this purpose, questionnaire forms are distributed to university students personally and via the internet.This paper includes significant research questions such as “Are accounting academicians informed and knowledgeable on new Turkish commerc...

Best Manufacturing Practices: Report of Survey Conducted at Headquarters, U.S. Army Industrial Operations Command, ROck Island, IL

National Research Council Canada - National Science Library

Renner, Ernie

1997-01-01

This report was produced by the Best Manufacturing Practices (BMP) program, a unique industry and government cooperative technology transfer effort that improves the competitiveness of America's industrial base both here and abroad...

76 FR 13629 - Draft Guidance for Industry on Chemistry, Manufacturing, and Controls Information-Fermentation...

Science.gov (United States)

2011-03-14

...] Draft Guidance for Industry on Chemistry, Manufacturing, and Controls Information--Fermentation-Derived... Controls (CMC) Information-- Fermentation-Derived Intermediates, Drug Substances, and Related Drug Products... documentation to submit to support the CMC information for fermentation-derived intermediates, drug substances...

Bioelectrochemical Integration of Waste Heat Recovery, Waste-to- Energy Conversion, and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes

Energy Technology Data Exchange (ETDEWEB)

Mac Dougall, James [Air Products and Chemicals, Inc., Allentown, PA (United States)

2016-02-05

Many U.S. manufacturing facilities generate unrecovered, low-grade waste heat, and also generate or are located near organic-content waste effluents. Bioelectrochemical systems, such as microbial fuel cells and microbial electrolysis cells, provide a means to convert organic-content effluents into electric power and useful chemical products. A novel biochemical electrical system for industrial manufacturing processes uniquely integrates both waste heat recovery and waste effluent conversion, thereby significantly reducing manufacturing energy requirements. This project will enable the further development of this technology so that it can be applied across a wide variety of US manufacturing segments, including the chemical, food, pharmaceutical, refinery, and pulp and paper industries. It is conservatively estimated that adoption of this technology could provide nearly 40 TBtu/yr of energy, or more than 1% of the U.S. total industrial electricity use, while reducing CO₂ emissions by more than 6 million tons per year. Commercialization of this technology will make a significant contribution to DOE’s Industrial Technology Program goals for doubling energy efficiency and providing a more robust and competitive domestic manufacturing base.

Extended FMEA for Sustainable Manufacturing: An Empirical Study in the Non-Woven Fabrics Industry

Directory of Open Access Journals (Sweden)

Thanh-Lam Nguyen

2016-09-01

Full Text Available Failure modes and effects analysis ( F M E A substantially facilitates the efforts of industrial manufacturers in prioritizing failures that require corrective actions to continuously improve product quality. However, the conventional approach fails to provide satisfactory explanation of the aggregate effects of a failure from different perspectives such as technical severity, economic severity, and production capacity in some practical applications. To fulfill the existing gap in the F M E A literature, this paper proposes an extension by considering associated quality cost and the capability of failure detection system as additional determinants to signify the priority level for each failure mode. The quality cost and capacity are considered as key factors for sustainable survival and development of an industrial manufacturer in the fierce competition market these days. The performance of the extended scheme was tested in an empirical case at a non-woven fabrics manufacturer. Analytical results indicate that the proposed approach outperforms the traditional one and remarkably reduces the percentage of defective fabrics from about 2.41% before the trial period to 1.13%,thus significantly reducing wastes and increasing operation efficiency, thereby providing valuable advantages to improve organizational competition power for their sustainable growth.

Substitution or segregation: explaining the gender composition in Dutch manufacturing industry 1899-1998

NARCIS (Netherlands)

van Klaveren, M.; Tijdens, K.G.

2001-01-01

This paper focuses on the role of substitution or segregation in the demand for female labour. Based on an extensive overview of detailed studies, fluctuations in the gender composition of the labour force in four major sectors of Dutch manufacturing industry have been examined over the past hundred

Instructional Materials in Manufacturing for Junior High School Industrial Arts. Final Report and Parts I-IV.

Science.gov (United States)

Ohio State Univ., Columbus.

This Title XI Institute was designed and conducted to introduce the participants to inquiry and invention taking place in industrial arts curriculum across the United States. The institute participated in the inquiry stage through advanced study of manufacturing technology and industrial arts curriculum, and in the invention stage through the…

National Emission Standards for Hazardous Air Pollutants (NESHAP) for the Portland Cement Manufacturing Industry Subpart LLL Rule Guidance

Science.gov (United States)

This Spring 2016 document is intended for the use of EPA staff, State and Local regulatory agencies and their staff, and industry plant managers for the NESHAP for the Portland Cement Manufacturing Industry.

DETERMINING THE NEED FOR ZERO SERIES EXECUTION IN MANUFACTURING PROCESSES IN THE TEXTILE GARMENT INDUSTRY

Directory of Open Access Journals (Sweden)

OANA Ioan Pave

2017-05-01

Full Text Available Because the industrial production requires the application of some transformation procedures on the material resources, so that a clothing product comes out with optimal use value in terms of maximum economic efficiency, one of the main influencial factors is the quality of the products. To make manufacturing processes more efficient, it is necessary to carry out the zero series in order to ensure the quality of the technological processes, as well as to prevent some design deficiencies. Among the main operations undertaken to ensure the quality of the zero series, we mention: creating the conditions for launch, tracking and finalizing the accompanying production documents under similar series production conditions; zero-series producers are usually the same workers who make up the series production line; equipping with the appropriate equipment and providing with necessary devices in order to create the technical conditions for the execution of the zero series; providing technical assistance in relation to manufacturing and control documentation for eliminating the design deficiencies. This paper presents the architecture of the zero series execution in manufacturing processes in the textile garment industry. The information obtained from the zero-series analysis is directed to the technical support, for possible corrections of the patterns according to which the products were manufactured.

CHAPTER FOUR LİBERTY AND TURKISH CONSTITUTIONS:

OpenAIRE

FENDOĞLU, Doç.Dr.Hasan Tahsin

2002-01-01

CHAPTER FOUR LIBERTY AND TURKISH CONSTITUTIONS: Doç.Dr.Hasan Tahsin FENDOĞLU ABSTRACT: Turkish Constitution of 1982 is the first and only Turkish Constitution that has a main purpose on strengthening the political power not the liberty or democr...

Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

Directory of Open Access Journals (Sweden)

Tsu-Yi Hung

2014-01-01

Full Text Available This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

Advantage management strategy in competition via technological race perspective: empirical evidence from the Taiwanese manufacturing industry.

Science.gov (United States)

Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

2014-01-01

This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the "catch-up" strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race.

Advantage Management Strategy in Competition via Technological Race Perspective: Empirical Evidence from the Taiwanese Manufacturing Industry

Science.gov (United States)

Hung, Tsu-Yi; Hsiao, Yu-Ju; Wu, Shih-Wei

2014-01-01

This study investigated the advantage management strategies of a firm regarding the technological race in the manufacturing sector. This is to reveal whether firms adopt a catch-up or leapfrogging strategy in the competition for innovation. The results show that competition is fierce in the Taiwanese manufacturing industry. Taiwanese manufacturing firms (mostly SMEs) tend to adopt the “catch-up” strategy to keep up with their competitors in order to remain in the technological race. The result indicates that, under financial constraints, Taiwanese manufacturing firms attempt to invest in R&D to catch up with their rivals or to avoid being eliminated from the race. PMID:25295307

Attitudes of Foreigners Who Learn Turkish as a Second Language towards Turkish Culture

Science.gov (United States)

Maden, Sedat

2017-01-01

There is a very close association between language and culture. Thus, cultural values should be prioritized in language training and cultural knowledge should be concurrently instructed. Turkish culture should also be introduced to learners of Turkish as a foreign language. Therefore, it is important to determine the attitudes of learners of…

The Competitive status of the U.S. civil aviation manufacturing industry: a study of the influences of technology in determining international industrial competitive advantage

National Research Council Canada - National Science Library

Seitz, Frederick; Steele, Lowell W

1985-01-01

... A Study of the Influences of Technology in Determining International Industrial Competitive Advantage Prepared by the U.S. Civil Aviation Manufacturing Industry Panel, Committee on Technology and International Economic and Trade Issues of the Office of the Foreign Secretary, National Academy of Engineering and the Commission on Engineering and Techni...

US manufacturing imports from China and employment in the Mexican manufacturing sector

Directory of Open Access Journals (Sweden)

Jorge Eduardo Mendoza Cota

2016-09-01

Full Text Available Since 2001 the manufacturing sector of Mexico has experienced a reduced growth rate. This study estimates the impact of U.S. and Chinese industrial activity on the demand for labor in the manufacturing sector of Mexico. With data on industrial activity, Chinese exports, wages and the peso-dollar exchange rate, a time series cointegration model is developed. The results show that exports from China to the USA and manufacturing wages have affected labor demand negatively, while factors such as the U.S. industrial production and the exchange rate tend to encourage manufacturing activity.

Readiness Assessment Towards Smart Manufacturing System for Tuna Processing Industry in Indonesia

Science.gov (United States)

Anggrahini, D.; Kurniati, N.; Karningsih, P. D.; Parenreng, S. M.; Syahroni, N.

2018-04-01

Marine product processing is one of the top priority clusters in the national development. Tuna, as a kind of deep ocean fishes, has the highest number of production that significantly increased throughout the years. Indonesia government encourages tuna processing industry, which are mostly dominated by small to medium enterprises, to grow continuously. Nowadays, manufacturers are facing substantial challenges in adopting modern system and technology that will lead a significant improvement through the internet of things (IoT). A smart factory transform integrated manufacturing process, in a high speed processing to respond customer needs. It has some positive impacts, such as increasing productivity, reducing set up time, shortening marketing and other support activities, hence the process is being more flexible and efficient. To implement smart manufacturing system, factories should know the readiness at any level of them, technology capability and strategy appropriateness. This exploratory study aims to identify the criterias, and develop an assessment tools to measure the level towards smart factory.

A COUNTY-LEVEL MODEL OF MANUFACTURING PLANT RECRUITMENT WITH IMPROVED INDUSTRIAL SITE QUALITY MEASUREMENT

OpenAIRE

Kriesel, Warren; McNamara, Kevin T.

1991-01-01

Empirical analysis of manufacturing plant location requires the use of a single industrial site quality measure. Under hedonic price theory, the price of industrial sites can be explained by their quality characteristics. The estimated site price is included with ten other location factors in an ordered, categorical logit model of plant attraction to Georgia counties. The results inform public decision-makers of the relative impact of site location factors and how changes in location factors ...

Micro-manufacturing: design and manufacturing of micro-products

National Research Council Canada - National Science Library

Koç, Muammer; Özel, Tuğrul

2011-01-01

.... After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes...

How grinding level and brewing method (Espresso, American, Turkish) could affect the antioxidant activity and bioactive compounds in a coffee cup.

Science.gov (United States)

Derossi, Antonio; Ricci, Ilde; Caporizzi, Rossella; Fiore, Anna; Severini, Carla

2018-06-01

Depending on geographical origin and cultural traditions, different brewing procedures are used all over the world to prepare a cup of coffee. In this work, we explored how three grinding levels of coffee powder and three coffee preparation methods - filtration (American), boiling (Turkish) and extraction under pressure (Espresso) - affect healthy compounds and physicochemical attributes in coffee served to consumers. Grinding level slightly affected the quality of coffee, whereas the preparation method significantly influenced all in-cup attributes. When the content per cup was compared, the American coffee presented higher values of antioxidant activity and total phenol content than espresso and Turkish coffees. Caffeine content was 316, 112 and 64 mg for the American, Turkish and espresso coffee cup, respectively. One American, three Turkish and five Espresso coffee cups contain similar amount of caffeine of 316, 336 and 320 mg, respectively which are below the maximum daily consumption (400 mg per day) suggested by the European Food Safety Authority. The extraction method affects the intake of bioactive and antioxidant substances with specific properties. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Factors Contribute to Safety Culture in the Manufacturing Industry in Malaysia

OpenAIRE

Ong Choon Hee

2014-01-01

The purpose of this paper is to explain the role of safety culture in the manufacturing industry in Malaysia and identify factors contribute to safety culture. It is suggested in this study that leadership support, management commitment and safety management system are important factors that contribute to safety culture. This study also provides theoretical implications to guide future research and offers practical implications to the managers in the development of safety culture. Given that ...

Educational program for industrial engineers : nurturing new perspectives on manufacturing technology

OpenAIRE

Ishii, Kazuyoshi; Ikeda, Hiroshi; Tsuchiya, Akinori; Shikida, Asami; Abe, Takehiko

2005-01-01

In this paper, we propose the basic concept and result of an educational program developed for industrial engineers and managers in leadership roles who wish to create new values in manufacturing technology. The basic concept combines an intelligent knowledge-based approach with the kaizen activity program in a framework of new value creation and comparative advantage models based on the ABC-G network (Academia, Business, Consultants, and Governmental officers). The educational program is bas...

The history of the peat manufacturing industry in The Netherlands : peat moss litter and active carbon

NARCIS (Netherlands)

Karel, Erwin; Gerding, Michiel; De Vries, Gerben

This article describes the development of three major forms of peat processing by the manufacturing industry in The Netherlands since the last quarter of the 19th century. At a time when peat as a fuel was gradually being replaced by coal, the first form was the peat moss litter industry. Peat moss

Sustaining Competitiveness: Moving Towards Upstream Manufacturing in Specialized-Market-Based Clusters in the Chinese Toy Industry

Directory of Open Access Journals (Sweden)

Huasheng Zhu

2016-02-01

Full Text Available Western industrial cluster literature pays little attention to specialized markets (SMs and the geographical agglomeration of distributors or sale agencies (SAs. This paper takes Linyin, Shandong, a famous commodity city in Northeastern China, as an example, to discuss the determinants that make SAs in SMs of the toy industry move towards upstream manufacturing. A structured questionnaire survey and subsequent interviews were carried out during 2011 and 2012 to collect data, and a Binary Logistic Regression Model was used to process the data. This paper looks from the perspective of global production networks theory, establishes an analytical framework that combines individual motivations of intra-firm coordination, local inter-firm relationships and dynamic cross-regional level relationships. The findings indicate that the expansion of SAs towards manufacturing allows them to sustain competitiveness under changing circumstances. The local inter-firm relationships within SM-based clusters not only makes it easy to obtain material and human resources with lower manufacturing costs, but also facilitates the access to production knowledge and technologies for an expansion of production scale. Cross-regional relationships with suppliers provide an informal channel for SAs to obtain skills, which is fundamental for an expansion into manufacturing. In addition, it is a preference for strengthening competitiveness rather than the simple pursuit of economic profit that encourages SAs to invest in manufacturing.

Productivity improvement through industrial engineering in the semiconductor industry

Science.gov (United States)

Meyersdorf, Doron

1996-09-01

Industrial Engineering is fairly new to the semiconductor industry, though the awareness to its importance has increased in recent years. The US semiconductor industry in particular has come to the realization that in order to remain competitive in the global market it must take the lead not only in product development but also in manufacturing. Industrial engineering techniques offer one ofthe most effective strategies for achieving manufacturing excellence. Industrial engineers play an important role in the success of the manufacturing facility. This paper defines the Industrial engineers role in the IC facility, set the visions of excellence in semiconductor manufacturing and highlights 10 roadblocks on the journey towards manufacturing excellence.

CO_2 emissions reduction of Chinese light manufacturing industries: A novel RAM-based global Malmquist–Luenberger productivity index

International Nuclear Information System (INIS)

Emrouznejad, Ali; Yang, Guo-liang

2016-01-01

Climate change has become one of the most challenging issues facing the world. Chinese government has realized the importance of energy conservation and prevention of the climate changes for sustainable development of China's economy and set targets for CO_2 emissions reduction in China. In China industry contributes 84.2% of the total CO_2 emissions, especially manufacturing industries. Data envelopment analysis (DEA) and Malmquist productivity (MP) index are the widely used mathematical techniques to address the relative efficiency and productivity of a group of homogenous decision making units, e.g. industries or countries. However, in many real applications, especially those related to energy efficiency, there are often undesirable outputs, e.g. the pollutions, waste and CO_2 emissions, which are produced inevitably with desirable outputs in the production. This paper introduces a novel Malmquist–Luenberger productivity (MLP) index based on directional distance function (DDF) to address the issue of productivity evolution of DMUs in the presence of undesirable outputs. The new RAM (Range-adjusted measure)-based global MLP index has been applied to evaluate CO_2 emissions reduction in Chinese light manufacturing industries. Recommendations for policy makers have been discussed. - Highlights: •CO_2 emissions reduction in Chinese light manufacturing industries are measured. •A novel RAM based Malmquist–Luenberger productivity index has been developed. •Recommendation to policy makers for reducing CO_2 reduction in China are given.

Recent rapid increases in the demand for city gas in manufacturing industries and future developments

International Nuclear Information System (INIS)

Kusano, Shigero

1992-01-01

City gas companies in Japan are experiencing an expansion in demand for gas in all manufacturing industries. The reason for this is, first and foremost, external, in that the first and second oil crises and the recent Gulf War have placed the oil market in a state of flux. That is to say, supply and demand in the oil products market is unstable while the stability of city gas, which is the main raw material for LNG, is being highly appraised. Another external reason is related to a subject much in the news recently the world over - the environment. City gas is highly regarded for its minimum environmental impact. Domestic reasons for the expansion include the fact that with the increase in use of city gas in manufacturing industries, the end user is beginning to recognize the various special qualities that city gas possesses. The expansion is also due in part to the unrelenting efforts in sales by the gas producers themselves. This report focuses on the expansion in demand in city gas over the past ten years from the point of view of Tokyo Gas as a producer that has been party to the increased sales of city gas in manufacturing industries for over 10 years giving views on the reasons for the increase. Graphic reports of the actual situation of the industry at meetings such as these are rare and therefore although this is slightly different from the main theme, I would like to proceed with the debate in the hope that this will be beneficial in the expansion of future gas demand in countries all over the world

Thermal energy consumption and carbon dioxide emissions in ceramic tile manufacture - Analysis of the Spanish and Brazilian industries

International Nuclear Information System (INIS)

Monfort, E.; Mezquita, A.; Vaquer, E.; Mallol, G.; Alves, H. J.; Boschi, A. O.

2012-01-01

Spain and Brazil are two of the world's biggest ceramic tile producers. The tile manufacturing process consumes a great quantity of thermal energy that, in these two countries, is mainly obtained from natural gas combustion, which entails CO 2 emission, a greenhouse gas. This study presents a comparative analysis of the thermal energy consumption and CO 2 emissions in the ceramic tile manufacturing process in Spain and Brazil, in terms of the different production technologies and different products made. The energy consumption and CO 2 emissions in ceramic tile manufacture by the wet process are very similar in both countries. In the dry process used in Brazil, less thermal energy is consumed and less CO 2 is emitted than in the wet process, but it is a process that is only used in manufacturing one particular type of product, which exhibits certain technical limitations. While in Spain the use of cogeneration systems in spray-dryers improves significantly the global energy efficiency. The average energy consumption in the different process stages, in both countries, lies within the range indicated in the Reference Document on Best Available Techniques in the Ceramic Manufacturing Industry (BREF of the Ceramic Manufacturing Industry) of the European Union. (Author) 14 refs.

The Impact Of Foreign Direct Investment On Turkish Economy 2010–2016

Directory of Open Access Journals (Sweden)

Isiks Aliya Zhkanova

2017-12-01

Full Text Available This study focuses on Foreign Direct Investment (FDI inflows and how they are linked with the economic indicators in Turkey including the Real Effective Exchange Rate (REER, and Gross Domestic Product per capita of Purchasing Power Parity - GDP (PPP in Turkey. The GDP (PPP variable is used because it shows significant causality on REER, along with the exchange rate volatility of the U.S Dollar in the Turkish stock market. Also, as an important sector of the Turkish economy, tourism revenue is elucidated according to the Organization for Economic Co-operation and Development (OECD data from 2016. The main objective of this study is to evaluate the impact of the FDI investment on economic condition in Turkey for the period between January 2010 and July 2016. The selected period is important because it represents the crucial time for Turkish economy following the 2008 global financial crisis along with the ongoing Civil War in neighboring Syria that had initiated in 2012, Turkish-Russian crises of 2015, and the military coup attempt in Turkey in 2016. It is argued that despite all the negative international and regional developments, FDI and Tourism play key roles in attracting income to the country. This is presented in the level of REER and GDP for PPP. The results also support the findings of many economists, who have previously asserted that the Turkish economic interaction is growing at a globalized level, and is able to compete with the other large attractive areas for foreign investors around the world. Finally, the results demonstrate that the tourism industry was the least affected sector in Turkey.

The Fuzzy u-Chart for Sustainable Manufacturing in the Vietnam Textile Dyeing Industry

Directory of Open Access Journals (Sweden)

Kim-Phung Truong

2017-07-01

Full Text Available The inevitability of measurement errors and/or humans of subjectivity in data collection processes make accumulated data imprecise, and are thus called fuzzy data. To adapt to this fuzzy domain in a manufacturing process, a traditional u control chart for monitoring the average number of nonconformities per unit is required to extend. In this paper, we first generalize the u chart, named fuzzy u-chart, whose control limits are built on the basis of resolution identity, which is a well-known fuzzy set theory. Then, an approach to fuzzy-logic reasoning, incorporating the decision-maker’s varying levels of optimism towards the online process, is proposed to categorize the manufacturing conditions. In addition, we further develop a condition-based classification mechanism, where the process conditions can be discriminated into intermittent states between in-control and out-of-control. As anomalous conditions are monitored to some extent, this condition-based classification mechanism can provide the critical information to deliberate the cost of process intervention with respect to the gain of quality improvement. Finally, the proposed fuzzy u-chart is implemented in the Vietnam textile dyeing industry to replace its conventional u-chart. The results demonstrate that the industry can effectively evade unnecessary adjustments to its current processes; thus, the industry can substantially reduce its operational cost and potential loss.

Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

OpenAIRE

Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

2009-01-01

Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

Mixed reality system and objective ergonomics evaluation for designing work stations in manufacturing industry

NARCIS (Netherlands)

Rhijn, J.W. van; Bosch, T.; Looze, M.P. de

2011-01-01

Due to shorter productlife cycles in manufacturing industry there is a lot of pressure on the process of designing new work systems. Early attention for human factors would lower the costs compared to changes at a later stage. Low cost tools for workstations design could help especially small to

Implementation Issues and Challenges in Applying Lean Manufacturing Tools & Techniques in Different Manufacturing Environments

OpenAIRE

Low, Kwee Ang

2005-01-01

Lean Manufacturing has made a significant impact on both the academic and manufacturing circles in the last decade. Fostered by a rapid spread into many other industrial sectors beyond the automotive industry, there has been significant development and "localisation" of the Lean Manufacturing concept in both developed and developing countries worldwide. Despite its successful application in a wide range of industries, little research has been carried out on its successful application outside ...

Lean manufacturing in Indian context: A survey

Directory of Open Access Journals (Sweden)

Rakesh Kumar

2015-04-01

Full Text Available This paper is an attempt to examine the implementation of Lean Manufacturing system in the Indian industries. Predominant elements of Lean Manufacturing, benefits gained after its implementation and obstacles observed by Indian Industry have been recognized. The results of this survey support the opinion that Lean Manufacturing had potential to improve the organizational performance of Indian industries. Nevertheless, Indian industries are required to be passionate to transform their manufacturing by adopting Lean manufacturing to gain the full benefits. A large numbers of literature papers are available on the better side of Lean manufacturing approach and its benefits gained by manufacturing organizations after implementation. But the adverse impacts of Lean manufacturing are not discussed to a great extent. Some drawbacks of Lean manufacturing are also highlighted in this paper.

78 FR 67117 - Manufacturing Council

Science.gov (United States)

2013-11-08

... preeminent destination for investment in manufacturing throughout the world'' as provided for in Section 4 of... the viewpoint of those stakeholders on current and emerging issues in the manufacturing sector. In... the U.S. manufacturing industry in terms of industry sectors, geographic locations, demographics, and...

Views of Turkish Language and Literature Teachers and Their Managers Related to Professional and Organizational Socialization Processes of Turkish Language and Literature Teachers

Science.gov (United States)

Özbas, Mehmet; Arslan, M. Abdullah

2016-01-01

Teaching Turkish effectively and successfully is one of the main functions of all the teaching phases of Turkish education system. In secondary education, this duty mostly depends on Turkish Language and Literature teachers. The aim of the research named "Socialization of Turkish Language and Literature teachers" is to evaluate the…

Prolonged menstrual cycles in female workers exposed to ethylene glycol ethers in the semiconductor manufacturing industry.

Science.gov (United States)

Hsieh, G-Y; Wang, J-D; Cheng, T-J; Chen, P-C

2005-08-01

It has been shown that female workers exposed to ethylene glycol ethers (EGEs) in the semiconductor industry have higher risks of spontaneous abortion, subfertility, and menstrual disturbances, and prolonged waiting time to pregnancy. To examine whether EGEs or other chemicals are associated with long menstrual cycles in female workers in the semiconductor manufacturing industry. Cross-sectional questionnaire survey during the annual health examination at a wafer manufacturing company in Taiwan in 1997. A three tiered exposure-assessment strategy was used to analyse the risk. A short menstrual cycle was defined to be a cycle less than 24 days and a long cycle to be more than 35 days. There were 606 valid questionnaires from 473 workers in fabrication jobs and 133 in non-fabrication areas. Long menstrual cycles were associated with workers in fabrication areas compared to those in non-fabrication areas. Using workers in non-fabrication areas as referents, workers in photolithography and diffusion areas had higher risks for long menstrual cycles. Workers exposed to EGEs and isopropanol, and hydrofluoric acid, isopropanol, and phosphorous compounds also showed increased risks of a long menstrual cycle. Exposure to multiple chemicals, including EGEs in photolithography, might be associated with long menstrual cycles, and may play an important role in a prolonged time to pregnancy in the wafer manufacturing industry; however, the prevalence in the design, possible exposure misclassification, and chance should be considered.

Examining the sectoral energy use in Turkish economy (1980-2000) with the help of decomposition analysis

International Nuclear Information System (INIS)

Ediger, Volkan S.; Huvaz, Ozkan

2006-01-01

This paper aims to investigate the sectoral energy use in the Turkish economy for the 1980-2000 period when significant changes occurred in the economic and demographic structure of the country. These changes had several impacts on the energy use in the primary sectors such as agriculture, industry and services. Decomposition analysis is conducted on these sectors by using the additive version of the LMDI method due to its advantages over others. Although a close relationship exists between primary energy consumption and GDP, analyses show that significant variations occurred in the sectoral energy use during the 1982, 1988-1989, 1994 and 1998-2000 periods. Such variations are related to the economic policies of the governments. The Turkish economy has undergone a transformation from agricultural to industrial enhanced by rapid urbanization, especially after 1982. However, industrialization has not been completed yet, and the energy demand should be increasing faster than national income until the energy intensity of the country reaches a peak. This study is performed on three basic sectors; however, decomposition into secondary and tertiary sectors will provide detailed information for further investigations

Strategies for Implementing Activity-Based Costing in the UK Manufacturing Industry

OpenAIRE

Cheung, Wai Ming; Tan, Kian; Tan, Swee; Sutton, Caroline

2013-01-01

The purpose of this paper is to report the findings with a case study on why activity based costing lacks impact in the UK manufacturing industry. Activity based costing was performed on selected MT range subsystems of an electrical power generator to compare with the current UNN UK’s conven-tional costing system. The results have found that the current costing system works well for the MT products and thus change of costing system is not necessary for these products. The activity based costi...

Estimates of emergency operating capacity in U.S. manufacturing industries: 1994--2005

Energy Technology Data Exchange (ETDEWEB)

Belzer, D.B.

1997-02-01

To develop integrated policies for mobilization preparedness, planners require estimates and projections of available productive capacity during national emergency conditions. This report develops projections of national emergency operating capacity (EOC) for 458 US manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level. These measures are intended for use in planning models that are designed to predict the demands for detailed industry sectors that would occur under conditions such as a military mobilization or a major national disaster. This report is part of an ongoing series of studies prepared by the Pacific Northwest National Laboratory to support mobilization planning studies of the Federal Emergency Planning Agency/US Department of Defense (FEMA/DOD). Earlier sets of EOC estimates were developed in 1985 and 1991. This study presents estimates of EOC through 2005. As in the 1991 study, projections of capacity were based upon extrapolations of equipment capital stocks. The methodology uses time series regression models based on industry data to obtain a response function of industry capital stock to levels of industrial output. The distributed lag coefficients of these response function are then used with projected outputs to extrapolate the 1994 level of EOC. Projections of industrial outputs were taken from the intermediate-term forecast of the US economy prepared by INFORUM (Interindustry Forecasting Model, University of Maryland) in the spring of 1996.

Trade Liberalization and Productivity-A Panel Study of the Mexican Manufacturing Industry

OpenAIRE

Talan Iscan

1998-01-01

In recent years there has been a revival of interest in the trade-growth nexus. A number of authors have suggested that regional economic integration and liberalization of international trade are likely to have positive effects not only on productivity levels but also on long-term productivity growth rates in developing countries. Using a panel of Mexican manufacturing industries, this paper examines several alternative mechanisms through which trade contributes positively to productivity lev...

The Attitude of Students Who Are Native Speakers of Turkish in England towards Turkish Lessons Based on Their Demographic Characteristics

Directory of Open Access Journals (Sweden)

Nazik Müge TEKİN

2017-09-01

Full Text Available Mother tongue education (or instruction plays quite a significant role in individual students’ success in both social and academic areas. A qualified mother tongue education is crucial in ensuring those students become successful adults in their later life and adopt their own culture and identities. From time to time, there might be students who have mother tongue medium education along with those who have other languages as the medium of instruction. Among those bilingual students there are children of Turkish citizens who immigrated to Western Europe as workers. Mother tongue education is a necessity for bilingual individuals to protect their identities, to adopt to the society they already live in and to learn the language used in that very society much more easily. This makes it more important for the bilingual Turkish children living in foreign countries to receive mother tongue education. In this vein, the attitudes of Turkish students, who live in England, towards the Turkish language class are examined. 105 Turkish students between 11 and 18 years enrolled in Wisdom and Namık Kemal Turkish School in the UK were requested to fill in a questionnaire. Based on their responses, their opinions about the Turkish language class were evaluated.

Microstructure of industrially produced reduced and low fat Turkish white cheese as influenced by the homogenization of cream

Directory of Open Access Journals (Sweden)

Karaman, A. D.

2012-09-01

Full Text Available The microstructure and fat globule distribution of reduced and low fat Turkish white cheese were evaluated. Reduced and low fat cheeses were manufactured from 1.5% and 0.75% fat milk respectively which were standardized unhomogenized and homogenized cream in a dairy plant. Homogenized and non-homogenized creams and cheese whey were analyzed for fat globule distribution and cheese samples were also analyzed for microstructure characteristics. According to the results, the homogenization of cream decreased the size of fat globules; and showed that a large number of fat particles were dispersed in the in matrix and improved the lubrication of cheese microstructure. According to the micrographs for the fat, which was not removed, they exhibited a more extended matrix with a few small fat globules compared to the defatted micrographs. Homogenization of cream produces small fat globules and unclustured fat globules were found in the resulting whey. These results are important for dairy processors for using cream homogenization as a processing tool at the industrial level.

Se estudia la microestructura y distribución de los glóbulos de grasa de quesos blancos turcos bajos en grasa. Quesos con reducida y baja cantidad en grasa fueron fabricados conteniendo entre el 1,5% y 0,75% de grasa de leche, respectivamente, y con cremas homogeneizadas y no homogeneizadas, en una planta de lácteos. Las cremas homogeneizadas y no homogeneizadas y el suero de los quesos se analizaron para determinar la distribución de los glóbulos de grasa y también se analizaron las características de la microestructura de muestras de queso. De acuerdo con los resultados, la homogeneización de la crema reduce el tamaño de los glóbulos de grasa, mostrando un gran número de partículas de grasa dispersa en la matriz de caseína que mejoró la lubricación de la microestructura del queso. De acuerdo con las micrografías de la grasa que no se elimina, estas exhiben

Studies on the Wood-Based Furniture, Leather Products and Footwear Manufacturing Industries in the Philippines

OpenAIRE

Poblador, Niceto; Solis, Adriano; Ybanez, Roy; Aragon, Bienvenido

1983-01-01

This paper aims to develop both the micro and macro data on the entire range of socioeconomic, managerial and technical issues faced by the wood-based furniture, footwear and leather tanning industry. The studies are intended to provide an initial base for policy formulation and implementation and to evolve a set of relevant guidelines for managerial and technical decisions. Findings show that the wood-based furniture industry is characterized by relative ease of entry that allows manufacture...

A Hybrid Model for Forecasting Sales in Turkish Paint Industry

Directory of Open Access Journals (Sweden)

Alp Ustundag

2009-12-01

Full Text Available Sales forecasting is important for facilitating effective and efficient allocation of scarce resources. However, how to best model and forecast sales has been a long-standing issue. There is no best forecasting method that is applicable in all circumstances. Therefore, confidence in the accuracy of sales forecasts is achieved by corroborating the results using two or more methods. This paper proposes a hybrid forecasting model that uses an artificial intelligence method (AI with multiple linear regression (MLR to predict product sales for the largest Turkish paint producer. In the hybrid model, three different AI methods, fuzzy rule-based system (FRBS, artificial neural network (ANN and adaptive neuro fuzzy network (ANFIS, are used and compared to each other. The results indicate that FRBS yields better forecasting accuracy in terms of root mean squared error (RMSE and mean absolute percentage error (MAPE.

Identifying and ranking of strategies to implement green supply chain management in Indian manufacturing industry using Analytical Hierarchy Process

Directory of Open Access Journals (Sweden)

Sunil Luthra

2013-09-01

Full Text Available Purpose – The study aims to identify and rank the major strategies that help achieve successful implementation of Green Supply Chain Management (GSCM in Indian manufacturing industry.Design/methodology/approach – Strategies to implement GSCM have been identified thorough extensive literature review and then experts’ opinion is sought for categorizing them into four representative dimensions which are then ranked using Analytic Hierarchy Process (AHP.Findings – The study categorizes the GSCM implementation strategies into four dimensions - Non members of supply chain, downward stream supply chain Members, Organizational members of supply chain and upward stream supply chain members. These dimensions are found to play an important role in greening the supply chains enabling the practicing firms achieve enhanced operational performances.Research limitations/implications- AHP is used for ranking the GSCM implementation strategies in Indian manufacturing scenario. The pair-wise comparisons are made on the basis of the opinion of the experts drawn from academia and industry. As is natural, opinions of experts may not always be free from bias or prejudices. Moreover, the study relied more on the GSCM practices literature in developed nations as only limited literature related to the undertaken work in the Indian context was available.Practical implications – This paper may play important role in understanding various strategies and ranking them in order of importance. This facilitates firms prioritize different actions for achieving high GSCM performances in Indian manufacturing industry. Strategic implementation of green supply chain management will help Indian manufacturing enterprises enjoy cost and efficiency benefits.Originality/value – GSCM is a relatively new topic for majority of Indian manufacturing industries. This work is likely to help GSCM practitioners select suitable strategies in consonance with the government regulations

Success of manufacturing industries – Role of Six Sigma

Directory of Open Access Journals (Sweden)

Venkatesh N.

2018-01-01

Full Text Available Six Sigma is a phenomenal quality management concepts which has helped many organizations to overcome quality crisis in the recent past. Six Sigma is observed as a very promising quality management tool for any organization to make its presence felt in the corporate world as it emphasizes on obtaining a fruitful solution to improve accuracy, reduce defect thereby reduce the cost and improve profits. The main objective of this investigation is to unearth the extent to which the companies have been benefitted due to Six Sigma implementation. This article presents the results based on the analysis of collective opinion of employees of various Indian manufacturing industries that have implemented Six Sigma. This research also examines interrelationship among various parameters defined in the research. The research revealed that industries are benefitted irrespective of their nature in terms of their growth, financial benefits, productivity and satisfaction of the customer. However, peoples’ equity that deals with the benefits that employees obtain after Six Sigma implementation is not certain. The research also revealed the existence of strong interrelationship among various parameters used to measure the success of Six Sigma.

Are Turkish University Students Autonomous or Not?

Directory of Open Access Journals (Sweden)

Büşra Kırtık

2017-01-01

Full Text Available The present study tried to determine Turkish learners’ attitudes, and the Turkish education system’s approach towards learner autonomy with regard to three main points: 1 whether Turkish university students are aware of learner autonomy or not 2 whether Turkish university students have the characteristics of autonomous learners (whether they are autonomous learners or not, and 3 if the Turkish education system is suitable for fostering learner autonomy or not from the viewpoint of the participants. Participants were 50 second grade learners in the English Language Teaching Departments of Hacettepe University (N=10, Mehmet Akif Ersoy University (N=10, and Uludag University (N=30 who had already taken courses about learner autonomy.  The data were collected by means of a questionnaire which had two Likert-scale sections and an open-ended questions section. The first Likert-scale section contained 15 characteristics of autonomous learners each of which was rated by the participants in a scale from strongly disagree to agree, from 1 to 5. In the second Likert-scale section, the participants were asked to rate the Turkish education system’s five basic elements such as school curriculums, course materials, approaches used by the teachers in classrooms, learning activities, and classroom settings. Additionally, learners’ opinions about their awareness and understanding of learner autonomy were gathered by five open ended questions. The results proposed that the participants were aware of learner autonomy, and had the characteristics of autonomous learners. On the other hand, results showed that the Turkish education system was not suitable for autonomous learners and did not foster learner autonomy. The findings suggested that the Turkish education system should be designed again in such a way to support the autonomous learners and to foster learner autonomy in all sections of the education.

PHONETIC AND NON-PHONETIC LANGUAGES: A CONTRASTIVE STUDY OF ENGLISH AND TURKISH PHONOLOGY FOCUSING ON THE ORTHOGRAPHY-INDUCED PRONUNCIATION PROBLEMS OF TURKISH LEARNERS OF ENGLISH AS A FOREIGN LANGUAGE (TURKISH EFL LEARNERS

Directory of Open Access Journals (Sweden)

Amir KHALILZADEH

2014-04-01

Full Text Available The present study aims to investigate the pronunciation problems of Turkish learners of English as a foreign language (Turkish EFL learners due to the orthography system of English. Orthography is a standardized system for using a particular writing system (script to write a particular language. It includes rules of spelling, and may also concern other elements of the written language such as punctuation and capitalization. It is clear that English is a non-phonetic and Turkish is a phonetic language, so it is very natural for the Turkish EFL learners to have some phonological problems in learning English. The author has done a contrastive study concerning three linguistic systems, i.e. consonants, vowels and syllable structures of English and Turkish to find the causes of the problems to be used in teaching English as a foreign language to Turks. The results of the study showed that the problems under discussion are caused by some differences between the orthography and the phonology of the two languages. As a result, English teachers, to be helpful, should focus on the differences and help the Turkish learners overcome the pronunciation problems. The author of the paper believes that an English teacher should be both aware of the differences and be able to teach them effectively to the Turkish EFL learners.

Carbon footprint as environmental performance indicator for the manufacturing industry

DEFF Research Database (Denmark)

Laurent, Alexis; Olsen, Stig Irving; Hauschild, Michael Zwicky

2010-01-01

With the current focus on our climate change impacts, the embodied CO2 emission or "Carbon footprint" is often used as an environmental performance indicator for our products or production activities. The ability of carbon footprint to represent other types of impact like human toxicity, and hence...... the overall environmental impact is investigated based on life cycle assessments of several materials of major relevance to manufacturing industries. The dependence of the carbon footprint on the assumed scenarios for generation of thermal and electrical energy in the life cycle of the materials is analyzed......, and the appropriateness of carbon footprint as an overall indicator of the environmental performance is discussed....

A case study analysis of the application of design for manufacture principles by industrial design students

OpenAIRE

Marshall, R; Page, T

2016-01-01

This paper describes a case study evaluation of a module that engages students on product and industrial design programmes with the principles of Design for Manufacturing (DFM). The primary element of the module is to expose students to the constraints of a full design to manufacture process. The module explores the design of a small polymer promotional item, together with the means of mass producing that item. This is done through the process of injection moulding and students design an inje...

Industrial assessment of radiofrequency and microwave radiations: case study at electronic manufacturing industries in Penang

International Nuclear Information System (INIS)

Mohd Zaid Abdullah

1996-01-01

In electronic manufacturing industry, the applications of an equipment emitting radiofrequency radiation (RFR) are numerous and Increasing. It is known that exposure to RFR at sufficiently high intensity and duration can produce a variety of adverse health effects. This paper presents some results from an extensive studies in the RFR field measurements at frequency range from 100 MHz to 1 GHz. All measurements were performed inside factories located at the Penang Free Trade Zone. In this case, the factories chosen are those that manufacture the electronic components whereby the applications of RFR equipment are likely to be intensive compared to other type of industries. The measurement system used in this study are the portable spectrum-analyzer, the passive log-periodic antenna and a desktop computer for data analysis. Results from this study have indicated that the RFR exposure levels in most factories are in the range of 7.7 x 10 sup -4 - 4.31 x 10 sup -3 Wm sup -2 and 0.01 - 0. 741 Vm sup -1 for power density and electric strength measurement respectively. These ranges are at least 100 times lower compared to the RFR protection guidelines proposed by the American National Standard Institute (ANSI). However, the exposure levels inside the factory are consistently 10 sup -3 - 10 sup -4 higher than the levels caused by natural sources and is about 10 sup 2 - 10 sup 6 higher than the levels measured at a distance of 30 m from a low-power output mobile phone transmitter. In the case of the health effect assessment, no sufficient evidence has been found to indicate the potential consequences resulting from excessive RFR exposure. Nonetheless, many factories surveyed are unaware of the existence of the international guidelines and codes on the safe use of radiofrequency energy even though, some measures are being taken to protect their employees against RFR

Sociological analysis of contemporary Turkish political elites

OpenAIRE

D. Ali Arslan

2007-01-01

This study was designed to find general characteristics of Contemporary Turkish political Elites since 1995 up to date. Social background characteristics were employed to realise the purposes. Documentary and historical research techniques were used during the study. As a result of examining the Contemporary Turkish political elites (since 1995 up to 2005) these major findings were discovered: the large majority of the Turkish parliamentary elites were well educated, male, middle aged, marrie...

[Manufacture of upholstered furniture and work-related upper limb musculoskeletal disorders: an industrial sector prevention project].

Science.gov (United States)

Di Leone, G; Carino, M; Nicoletti, S; Trani, G; Ambrosi, L

2008-01-01

In cooperation with the IRCCS Fondazione Maugeri and the IRCCS Fondazione Ospedale Maggiore Policlinico - EPM-CEMOC, of Milan, the Local Health Unit in Bari, Italy carried out a research project, sponsored partly by the Italian Ministry of Health, on upper limb work-related musculoskeletal disorders (UL-WMSDs) in a specific manufacturing sector, the upholstered furniture industry. This "sofa district" is widely represented with approximately 14,000 workers and 500 factories over a wide geographic area of southern Italy. Advanced technology in the manufacturing process is combined with workers performing intensive arm-hand tasks. The aim of the study included: a) assessment of exposure to repetitive strain and movements of the upper limb in a representative sample of the factories using the OCRA method, b) analysis of the annual prevalence and incidence rates, c) definition of possible improvement via ergonomic solutions in the various factories. Via a network of occupational physicians a total of more than 6000 subjects were examined over a 5-year period. Case-definition was assessed through standardized procedures. A detailed description of the manufacturing process of the upholstered furniture industry and of the characteristics of the working population is provided Exposed groups at risk were:filling preparation workers, leather-cutting operators, sewing and upholstery-assembly workers. Data collected in private companies of different size in this extensive industrial "sofa area" emphasize the importance of prevention through adequate ergonomic solutions and the need to improve training programmes covering the whole area.

NEGATIVE CURRENCY-RISK-EXPOSURE FOR TURKISH EQUITIES

Directory of Open Access Journals (Sweden)

Salvatore J. Terregrossa

2016-04-01

Full Text Available Currency-risk-exposure is an issue for Turkish equities, from two different angles: internationaltrade and foreign-portfolio-investment. The likely effect is positive for the former, and negative for the latter aspect. Consequently, the overall or net effect on equity value depends on which of these aspects of currency-risk-exposure has the greater impact. The present empirical analysis estimates currency risk of Turkish equities within a multi-factor regression setting, utilizing the framework of the Security Market Plane (SMP model. The SMP model embodies a conditional relation among three variables: beta, realized excess market-return, and expected excess portfolio-return. The SMP empirical framework is extended to include a currency-risk-factor in the present analysis. The currency-risk-factor is specified as the excess return to holding foreign currency (€; $, relative to holding domestic currency (Turkish Lira. The SMP-related factor is the cross-product term of beta and realized excess market-return (β it rMt . A regression of realized excess portfolio-returns against the corresponding currency-risk-factor and cross product-term (β it rMt finds that the Turkish stocks represented in the analysis generally have overall negative currency-risk-exposure; suggesting that unexpected currency depreciation generally leads to lower values for Turkish stocks (and portfolios of Turkish stocks. Thus, after accounting for the SMP-related interaction-effect between beta and realized excess marketreturn, currency risk is found to command a premium for the Turkish stocks represented in the analysis.

Exploring the Technological Collaboration Characteristics of the Global Integrated Circuit Manufacturing Industry

Directory of Open Access Journals (Sweden)

Yun Liu

2018-01-01

Full Text Available With the intensification of international competition, there are many international technological collaborations in the integrated circuit manufacturing (ICM industry. The importance of improving the level of international technological collaboration is becoming more and more prominent. Therefore, it is vital for a country, a region, or an institution to understand the international technological collaboration characteristics of the ICM industry and, thus, to know how to enhance its own international technological collaboration. This paper depicts the international technological collaboration characteristics of the ICM industry based on patent analysis. Four aspects, which include collaboration patterns, collaboration networks, collaboration institutions, and collaboration impacts, are analyzed by utilizing patent association analysis and social network analysis. The findings include the following: first, in regard to international technological collaboration, the USA has the highest level, while Germany has great potential for future development; second, Asia and Europe have already formed clusters, respectively, in the cooperative network; last, but not least, research institutions, colleges, and universities should also actively participate in international collaboration. In general, this study provides an objective reference for policy making, competitiveness, and sustainability in the ICM industry. The framework presented in this paper could be applied to examine other industrial international technological collaborations.

Virgin Mary’s Importance in Islam and its Reflection on Classical Turkish Literature and Turkish Language

Directory of Open Access Journals (Sweden)

Abdulhekim Koçin

2017-12-01

Full Text Available The language used by a poet or an author in a literary work in verse or prose, and the way he uses idioms, proverbs and literary arts in that language indicate the success of his art. The achievement of author in this matter makes him well known in the country where he lives. However, the topic choice is as important as an artist’s language skills. That’s why poets and authors prefer universal subjects such as love, death, religion, religious personalities (like prophets, saints, etc. and humanity (man's way of living and right to live in their works. If artists produce universal subjects with a clear language, a fluent wording and a strong story line, this achievement makes them famous both nationally and internationally. This fact can also be applied to the literature of any nation. Literary works containing local subjects cannot take their place in the world’s literary history. Classical Turkish literature (Ottoman Period Turkish Literature is extremely rich in subject matter. The period in which Classical Turkish Literature continued its existence was the period when the Ottoman state dominated large geographical regions in Asia, Europe and Africa. Accordingly, the lifestyles, beliefs, traditions and customs of people from different religions, races and cultures living in these geographies; in other words, the issues that are important to these people were also reflected in the literature produced in this period. The subject of this article Virgin Mary is an important religious and a historical personality primarily for the Ottoman state’s Christians and Muslim subjects as well as those who weren’t the subjects of Ottoman Empire. In this article, first how Virgin Mary took part in the two most important sources of Classical Turkish literature, Koran and the hadiths will be summarized. Secondly, Virgin Mary’s place in Classical Turkish literature and the vocabulary and concepts that Turkish language gained through Virgin Mary will

Spatial Agglomeration, Human and Social Capital: The Case of Turkey Manufacturing Industry

Directory of Open Access Journals (Sweden)

Özer Karakayacı

2017-12-01

Full Text Available Over the last three decades, new economic theories explode the factors depending on space and spatial characteristics. In this process, it is developed the theories on social-cultural aspects and spatial characteristics of regions instead of traditional economic theories. These theories have been main strategy for economic development and growth. Economic development has not been considered independently from space by these theories and economic performance of a region was emphasized importance of economic actors, institutional and economic infrastructure as well as geographic features. Geography or spatial features contribute to increase not only skilled workforce, knowledge spillover and distribution but also social relations and interaction. In other words, the social-cultural and humanity factors relating with spatial and geography are major factors affecting on the development and also growing of economic activities. Especially, while industrialization as engine of regional development has been benefiting from the advantages offered by spatial features, clustering of economic activities and relationships among actors are shaped according to socio-cultural and human factors revealed spatial features. In this context, clustering of economic activities has been one of the new areas of interest in the theory of economic geography. Therefore, clustering of economic activities and human-social-spatial resources has been emphasized to play a major role in growth and development of regions by essays of the new economic geography. In that context, the aim of this paper is to determine the effects of human and social capital in the spatial agglomeration of economic activities in case of Konya-Turkey. In this study, the agglomeration tendencies for manufacturing industry in Konya, which have major potentials in terms of human and social capital and manufacturing industry potential, is analysed comparatively depending on secondary resources and using

BARRIERS TO THE USE OF RADIATION-CURABLE ADHESIVES IN THE COATED AND LAMINATED SUBSTRATE MANUFACTURING INDUSTRY

Science.gov (United States)

The paper gives results of an investigation of barriers to the use of radiation-cured technology in the coated and laminated substrate manufacturing industry. t presents information gathered from radiation-curable coating and equipment suppliers as well as technical publications....

Trace elements in the diets of Turkish children determined by INAA

International Nuclear Information System (INIS)

Aras, N.K.; Mauerhofer, E.; Naidu, R.K.; Arcasoy, A.; Denschlag, H.O.

1992-01-01

The role of toxic and essential trace elements in human diet is increasingly important because of environmental problems and the increasingly sophisticated industrial treatment of food products. Instrumental neutron activation analysis (INAA) is particularly well suited for multielement determinations. In order to test and demonstrated the usefulness of the method in connection with the fast pneumatic tube system of the Mainz TRIGA reactor, the authors have analyzed six diet samples of Turkish children

Long Working Hours and Emotional Well-Being in Korean Manufacturing Industry Employees

OpenAIRE

Lee, Kyoung-Hye; Kim, Jong-Eun; Kim, Young-Ki; Kang, Dong-Mug; Yun, Myeong-Ja; Park, Shin-Goo; Song, Jae-Seok; Lee, Sang-Gil

2013-01-01

Objectives Korea is well known for its long work hours amongst employees. Because workers of the manufacturing industry are constantly exposed to extended work hours, this study was based on how long work hours affect their emotional well-being. Methods The analysis was done using the secondary Korean Working Condition Survey (KWCS). Long work hours were defined to be more than 48 hours, and they were subcategorized into units of 52 hours and 60 hours. Based on the WHO (five) well-being index...

Industrial hazardous waste management in Turkey: Current state of the field and primary challenges

International Nuclear Information System (INIS)

Salihoglu, Gueray

2010-01-01

A holistic evaluation of a country's hazardous waste management (HWM) practices is useful in identifying the necessary actions to focus on. Based on an analysis of industrial hazardous waste (HW) generation in Turkey, this paper attempts to critically evaluate and report current Turkish HWM practices and discuss the primary challenges to be addressed. The generation of industrial HW for Turkey reported in 2004 was 1.195 million tons, which accounted for 7% of the total industrial solid waste (ISW) generated by the manufacturing industry, and for nearly 4.9% of the total solid waste generated in the country. The HW generated by the top five manufacturing product categories - basic metals, chemicals and chemical products, food and beverages, coke and refined petroleum, motor vehicles and trailers - accounted for 89.0% of total industrial HW. 21% of the HW generated in 2004 was recycled or reused, and 6% was sold or donated, whereas 73% was sent to ultimate disposal. 67% of the HW sent to ultimate disposal was disposed of at municipal landfills. The total capacity of the existing regional HW facilities is 212,500 tons/year, which accounts for about 24% of the HW to be disposed. Turkey has identified the HW problem in the country and enacted legislation, designated a lead agency, and promulgated rules and regulations. Several new initiatives are planned for improving HW management nationally; however, some HWM problems will be persistent due to previous and existing industrial development plans. These development policies led to the concentration of industry in regions marked by precious agricultural fields and high population density. This occurred because the government previously exhibited a default prioritization towards industrial development, leading to insufficient implementation of regulations on HW generators. Some of the problems may also be rooted in other countries that allow illegal transboundary HW movements despite international regulations.

Statistical applications for chemistry, manufacturing and controls (CMC) in the pharmaceutical industry

CERN Document Server

Burdick, Richard K; Pfahler, Lori B; Quiroz, Jorge; Sidor, Leslie; Vukovinsky, Kimberly; Zhang, Lanju

2017-01-01

This book examines statistical techniques that are critically important to Chemistry, Manufacturing, and Control (CMC) activities. Statistical methods are presented with a focus on applications unique to the CMC in the pharmaceutical industry. The target audience consists of statisticians and other scientists who are responsible for performing statistical analyses within a CMC environment. Basic statistical concepts are addressed in Chapter 2 followed by applications to specific topics related to development and manufacturing. The mathematical level assumes an elementary understanding of statistical methods. The ability to use Excel or statistical packages such as Minitab, JMP, SAS, or R will provide more value to the reader. The motivation for this book came from an American Association of Pharmaceutical Scientists (AAPS) short course on statistical methods applied to CMC applications presented by four of the authors. One of the course participants asked us for a good reference book, and the only book recomm...

Toward New-Generation Intelligent Manufacturing

Directory of Open Access Journals (Sweden)

Ji Zhou

2018-02-01

Full Text Available Intelligent manufacturing is a general concept that is under continuous development. It can be categorized into three basic paradigms: digital manufacturing, digital-networked manufacturing, and new-generation intelligent manufacturing. New-generation intelligent manufacturing represents an in-depth integration of new-generation artificial intelligence (AI technology and advanced manufacturing technology. It runs through every link in the full life-cycle of design, production, product, and service. The concept also relates to the optimization and integration of corresponding systems; the continuous improvement of enterprises’ product quality, performance, and service levels; and reduction in resources consumption. New-generation intelligent manufacturing acts as the core driving force of the new industrial revolution and will continue to be the main pathway for the transformation and upgrading of the manufacturing industry in the decades to come. Human-cyber-physical systems (HCPSs reveal the technological mechanisms of new-generation intelligent manufacturing and can effectively guide related theoretical research and engineering practice. Given the sequential development, cross interaction, and iterative upgrading characteristics of the three basic paradigms of intelligent manufacturing, a technology roadmap for “parallel promotion and integrated development” should be developed in order to drive forward the intelligent transformation of the manufacturing industry in China. Keywords: Advanced manufacturing, New-generation intelligent manufacturing, Human-cyber-physical system, New-generation AI, Basic paradigms, Parallel promotion, Integrated development

Pioneering the combined use of agile and stage-gate models in new product development–cases from the manufacturing industry

DEFF Research Database (Denmark)

Ahmed-Kristensen, Saeema; Daalhuizen, Jaap

2015-01-01

Stage gate models have long been the norm in manufacturing industries. Whereas agile models, such as scrum, are standard amongst software industries. These two models have been traditionally been pitted against one another, each with its own advantages and limitations. A new trend is being observed...

Turkish cultural heritage: a cup of coffee

Directory of Open Access Journals (Sweden)

Birsen Yılmaz

2017-12-01

Full Text Available Setting out a fabulous journey from a tiny bean, coffee is the stimulant of the heart and mind and a mysterious plant that strengthens friendship and also takes your tiredness away during the day. Although information on how and where the coffee came from is not clear, Sheikh Şazeli is regarded as the “father” by coffee makers. The word coffee originates from “Kaffa”, a primary coffee production center in Abyssinia, Africa, which can be considered the homeland of coffee. According to this consideration, in Abyssinia, coffee was consumed with bread; it was then pulped and brought to Yemen, and Yemeni people started to cultivate coffee. The word “kahve” in Turkish does not mean the coffee plant like its synonym in Arabic but means the beverage made by boiling. Turkish coffee is a blend of high-quality Arabic-type coffee beans, originating from Brazil and Central America and moderately roasted and ground finely. The way it is prepared differentiates Turkish coffee from others. This coffee was called Turkish coffee because of a new method of preparation invented by Turkish people where it is boiled in copper coffee pots. Turkish coffee that has spread around the world with this name has been an indispensable part of the cultural and social history of Turks.

The Place of Digital Marketing on Turkish Small Businesses

Directory of Open Access Journals (Sweden)

Serhat Karatum

2017-12-01

Full Text Available In the 21st century, technology develops rapidly and continuously and it affects every aspect of our lives. Marketing concept has been affected by these developments. What we want from marketing and reaching in an increasingly virtualized world is to be a lot faster than the past. Also, new marketing channels have emerged as well. Turkish small businesses, the building blocks of Turkish economy, have the chance of addressing the marketing problems and solving the problems with the digital marketing channels. Small businesses have time and cash money limitations and this restricts their development. It is aimed to inform Turkish small businesses about Turkish population’s digital channel usage and the benefits of using digital marketing channels. As a result, digital marketing is going to improve the speed of renewal process of the Turkish small businesses and competition between them will improve the economy of Turkey. In the 21st century, technology develops rapidly and continuously and it affects every aspect of our lives. Marketing concept has been affected by these developments. What we want from marketing and reaching in an increasingly virtualized world is to be a lot faster than the past. Also, new marketing channels have emerged as well. Turkish small businesses, the building blocks of Turkish economy, have the chance of addressing the marketing problems and solving the problems with the digital marketing channels. Small businesses have time and cash money limitations and this restricts their development. It is aimed to inform Turkish small businesses about Turkish population’s digital channel usage and the benefits of using digital marketing channels. As a result, digital marketing is going to improve the speed of renewal process of the Turkish small businesses and competition between them will improve the economy of Turkey.

A case study on implementing lean ergonomic manufacturing systems (LEMS) in an automobile industry

Science.gov (United States)

Srinivasa Rao, P.; Niraj, Malay

2016-09-01

Lean manufacturing is a business strategy developed in Japan. In the present scenario, the global market is developing new techniques for getting more and more production rate with a good quality under low cost. In this context, human factors have to be given importance to their working conditions. The study demonstrates the adoption of ergonomic conditions in lean manufacturing for the improvement of organizational performance of the industry. The aim of ergonomics is to adapt the new techniques to their work in efficient and safe ways in order to optimize the human health conditions and increasing the production rate. By conducting survey on various disciplines and showed how the production rate and human ergonomic conditions is affected.

Big Data Analytics for Smart Manufacturing: Case Studies in Semiconductor Manufacturing

Directory of Open Access Journals (Sweden)

James Moyne

2017-07-01

Full Text Available Smart manufacturing (SM is a term generally applied to the improvement in manufacturing operations through integration of systems, linking of physical and cyber capabilities, and taking advantage of information including leveraging the big data evolution. SM adoption has been occurring unevenly across industries, thus there is an opportunity to look to other industries to determine solution and roadmap paths for industries such as biochemistry or biology. The big data evolution affords an opportunity for managing significantly larger amounts of information and acting on it with analytics for improved diagnostics and prognostics. The analytics approaches can be defined in terms of dimensions to understand their requirements and capabilities, and to determine technology gaps. The semiconductor manufacturing industry has been taking advantage of the big data and analytics evolution by improving existing capabilities such as fault detection, and supporting new capabilities such as predictive maintenance. For most of these capabilities: (1 data quality is the most important big data factor in delivering high quality solutions; and (2 incorporating subject matter expertise in analytics is often required for realizing effective on-line manufacturing solutions. In the future, an improved big data environment incorporating smart manufacturing concepts such as digital twin will further enable analytics; however, it is anticipated that the need for incorporating subject matter expertise in solution design will remain.

Bibliometric Profile of Turkish Journal of Psychology

Directory of Open Access Journals (Sweden)

Umut Al

2013-11-01

Full Text Available The Turkish Journal of Psychology has been indexed by the Social Science Citation Index since 1995. This study examines the Turkish Journal of Psychology and bibliometric features of its articles.  The research carried out covers 118 articles between the years 1995-2005.  The following research ques- tions have been addressed: 1 What are the subjects of the articles? 2 Is multi- ple authorship a prevalent feature of the articles? 3 What are the institutional affiliations of the authors of the articles? 4 What are the common characteris- tics of the cited articles? 5 Which types of sources (journal articles, mono- graphs, etc. get cited more often in the articles? 6 What are the most frequent- ly cited journals in the TJP? 7 Does the distribution of citations to journals fit Bradford's Law of Scattering? 8 Is there a relationship between the impact fac- tors of journals and the number of citations they get? 9 What is the rate of lit- erature obsolescence in psychology? 10 With regard to impact factor, what is the position of the TJP? Almost all of the articles were written in Turkish. The important part of the contributors was affiliated with Hacettepe, Ankara and the Middle East Technical universities. This research showed that 57% of articles (67 articles published in Turkish Journal of Psychology received no citations remaining 43% (51 articles were cited 135 times. The author self-citation ratio was 34%. In addition, journal self-citation ratio was 41%. Journals received 69% of all cita- tions in the Turkish Journal of Psychology. Journal of Personality and Social Psychology, Turkish Journal of Psychology, Child Development, Developmental Psychology and Psychological Bulletin were among the most frequently cited journals. Articles that appeared in the top 18 journals received 33% of all citations. The half-life of sources cited in the Turkish Journal of Psychology was ten years. According to the impact factor rank, the Turkish Journal of

Comparative Analysis of Two Industries for Validating Green Manufacturing (GM) Framework: An Indian Scenario

Science.gov (United States)

Rehman, Minhaj Ahemad Abdul; Shrivastava, Rakesh Lakshmikumar; Shrivastava, Rashmi Rakesh

2017-04-01

Green Manufacturing (GM) deals with manufacturing practices that reduces or eliminates the adverse environmental impact during any of its phases. It emphasizes the use of processes that do not contaminate the environment or hurt consumers, employees, or other stakeholders. This paper presents the comparative analysis of two Indian industries representing different sectors for validating GM framework. It also highlights the road map of the companies for achieving performance improvement through GM implementation and its impact on organisational performance. The case studies helps in evaluating the companies GM implementation and overall business performance. For this, a developed diagnostic instrument in the form of questionnaire was administered amongst employees in the companies respectively and their responses were analysed. In order to have a better understanding of the impact of GM implementation, the information about overall business performance was obtained over the last 3 years. The diagnostic instrument developed here may be used by manufacturing organisations to prioritise their management efforts to assess and implement GM.

Manufacturing processes in the textile industry. Expert Systems for fabrics production

Directory of Open Access Journals (Sweden)

Juan BULLON

2017-03-01

Full Text Available The textile industry is characterized by the economic activity whose objective is the production of fibres, yarns, fabrics, clothing and textile goods for home and decoration,as well as technical and industrial purposes. Within manufacturing, the Textile is one of the oldest and most complex sectors which includes a large number of sub-sectors covering the entire production cycle, from raw materials and intermediate products, to the production of final products. Textile industry activities present different subdivisions, each with its own traits. The length of the textile process and the variety of its technical processes lead to the coexistence of different sub-sectors in regards to their business structure and integration. The textile industry is developing expert systems applications to increase production, improve quality and reduce costs. The analysis of textile designs or structures includes the use of mathematical models to simulate the behavior of the textile structures (yarns, fabrics and knitting. The Finite Element Method (FEM has largely facilitated the prediction of the behavior of that textile structure under mechanical loads. For classification problems Artificial Neural Networks (ANNs haveproved to be a very effective tool as a quick and accurate solution. The Case-Based Reasoning (CBR method proposed in this study complements the results of the finite element simulation, mathematical modeling and neural networks methods.

Understanding childhood (problem) behaviors from a cultural perspective: comparison of problem behaviors and competencies in Turkish immigrant, Turkish and Dutch children.

Science.gov (United States)

Bengi-Arslan, L; Verhulst, F C; van der Ende, J; Erol, N

1997-11-01

Parents' reports of problem behaviors in 2,081 Dutch children, 3,127 Turkish children in Ankara and 833 Turkish immigrant children living in The Netherlands, aged 4-18 years, were compared. Dutch and Turkish versions of the Child Behavior Checklist (CBCL) were used. Immigrant children were scored higher than Dutch children on 6 of the 11 CBCL scales, most markedly on the Anxious/Depressed scale. Immigrant children were scored higher than Ankara children on five CBCL scales. However, these differences were much smaller than those found between immigrant and Dutch children. Furthermore, immigrant children's Total Problem scores did not differ from those for Ankara children. Turkish immigrant children have very similar patterns of parent-reported problem behaviors to children living in Turkey, although both groups of Turkish children showed higher levels of parent-reported problem behaviors than Dutch children. The higher scores for Turkish children on the Anxious/Depressed scale compared with their Dutch peers may be explained by cultural differences in parental perception of children's problem behaviors, as well as the threshold for reporting them, or by cultural differences in the prevalence of problems, for instance as the result of cross-cultural differences in child-rearing practice. More research is needed to test the degree to which Turkish immigrant parents tend to preserve their cultural characteristics and child-rearing practices in Dutch society.

The history of the peat manufacturing industry in The Netherlands: Peat moss litter and active carbon

Directory of Open Access Journals (Sweden)

M.A.W. Gerding

2015-11-01

Full Text Available This article describes the development of three major forms of peat processing by the manufacturing industry in The Netherlands since the last quarter of the 19th century. At a time when peat as a fuel was gradually being replaced by coal, the first form was the peat moss litter industry. Peat moss litter was made from white peat that was ground and sieved in factories which were located mainly in bog areas in the south-east of the province of Drenthe. It served as excellent bedding for horses and cattle. The second form of industrial peat processing was the manufacture, from 1921 onwards, of active carbon made from black peat. The Purit (Norit factory, now part of the Cabot Corporation, is still the only active carbon factory using peat as a raw material. The third form of peat processing was the production of garden peat and potting soil. This is still a widespread activity in peat areas all over the world. The peat moss litter industry thrived from the 1880s until shortly after the First World War. The arrival of the horse-drawn tram in all of the major cities of Europe created a great demand for animal bedding to be used in the vast stables of the tramway companies. Peat moss litter was cleaner, healthier and easier to handle than straw. There was similar demand from the armies, which used millions of horses during the First World War. Owing to the development of motorised vehicles, the peat market collapsed after the war and this plunged the industry into a prolonged crisis which was not overcome until peat was found to be a suitable growing medium for horticulture in the 1950s. Living and working conditions in peatlands were harsh, earnings irregular and labourers’ rights limited. The peat manufacturing industry was the first to introduce collective labour agreements, medical benefits and pension plans. Nonetheless massive unemployment, poverty and the necessity to migrate to other parts of the country were clear signs that the era of

IDENTIFICATION OF FACTORS AFFECTING LEAN MANUFACTURING IMPLEMENTATION IN PUMP MANUFACTURING COMPANIES IN INDIA - A CASE STUDY

Directory of Open Access Journals (Sweden)

Pratik Badgujar

2016-09-01

Full Text Available Lean Manufacturing has now become a common word in the industrial corridors. It has now been applied to the industries of several domains. No wonder that the Pump manufacturing has also witnessed profound influence of Lean philosophy. Pump manufacturing in India has a history as old as 80 years with more than 500 pump manufacturing units presently working. The present research is an explorative study and was undertaken to identify various factors affecting lean manufacturing implementation in pump manufacturing industry. Analysis of results revealed that the companies registered increase in productivity and reduction in costs and wastes. Lack of understanding, Supply chain and Company culture are found to be the strongest barriers of lean manufacturing implementation. The multiple regression model revealed that Lack of workers support can be fairly reduced by educating them about Lean Manufacturing and establishing a healthy communication with workers. An analysis across different management levels revealed disparity in perceptions and views of personnel. There is a need for top management to align organization toward common goals so as to achieve better success in implementing lean manufacturing.

Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

Science.gov (United States)

Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

2015-01-01

In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

Analysis of phthalate esters in soils near an electronics manufacturing facility and from a non-industrialized area by gas purge microsyringe extraction and gas chromatography

Energy Technology Data Exchange (ETDEWEB)

Wu, Wei [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Hu, Jia [Suzhou Center for Disease Prevention and Control, Suzhou, Jiangsu (China); Wang, Jinqi; Chen, Xuerong; Yao, Na [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Tao, Jing, E-mail: jingtao1982@126.com [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Zhou, Yi-Kai, E-mail: zhouyk@mails.tjmu.edu.cn [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China)

2015-03-01

Here, a novel technique is described for the extraction and quantitative determination of six phthalate esters (PAEs) from soils by gas purge microsyringe extraction and gas chromatography. Recovery of PAEs ranged from 81.4% to 120.3%, and the relative standard deviation (n = 6) ranged from 5.3% to 10.5%. Soil samples were collected from roadsides, farmlands, residential areas, and non-cultivated areas in a non-industrialized region, and from the same land-use types within 1 km of an electronics manufacturing facility (n = 142). Total PAEs varied from 2.21 to 157.62 mg kg{sup −1} in non-industrialized areas and from 8.63 to 171.64 mg kg{sup −1} in the electronics manufacturing area. PAE concentrations in the non-industrialized area were highest in farmland, followed (in decreasing order) by roadsides, residential areas, and non-cultivated soil. In the electronics manufacturing area, PAE concentrations were highest in roadside soils, followed by residential areas, farmland, and non-cultivated soils. Concentrations of dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP) differed significantly (P < 0.01) between the industrial and non-industrialized areas. Principal component analysis indicated that the strongest explanatory factor was related to DMP and DnBP in non-industrialized soils and to butyl benzyl phthalate (BBP) and DMP in soils near the electronics manufacturing facility. Congener-specific analysis confirmed that diethylhexyl phthalate (DEHP) was a predictive indication both in the non-industrialized area (r{sup 2} = 0.944, P < 0.01) and the industrialized area (r{sup 2} = 0.860, P < 0.01). The higher PAE contents in soils near the electronics manufacturing facility are of concern, considering the large quantities of electronic wastes generated with ongoing industrialization. - Highlights: • A new method for determining phthalate esters in soil samples was developed. • Investigate six phthalates near an industry and a

Research overview: Advanced Manufacturing in Switzerland

OpenAIRE

Schärer, Claudia

2016-01-01

SATW is convinced that industrial production methods will see fundamental changes over the coming years. Mastering new production technologies (advanced manufacturing) such as additive manufacturing and industry 4.0 will be vital to keep Swiss production at a competitive level. New additive manufacturing processes such as 3D printing offer revolutionary opportunities and have the potential to replace traditional production methods. Industry 4.0 has seen the definition of a new concept for...

Understanding industrial energy use: Physical energy intensity changes in Indian manufacturing sector

International Nuclear Information System (INIS)

Sudhakara Reddy, B.; Kumar Ray, Binay

2011-01-01

This study develops and examines physical energy intensity indicators in five industrial sub-sectors-iron and steel, aluminum, textiles, paper, and cement-and investigates mitigation options for energy related CO 2 emissions (during 1991-2005). Decomposition analysis has been employed to separate the structural effect (share of different products in the sector) from pure intensity effect (efficiency increase through technical improvement) for each industry. The results show that the combined effect (considering both structural and intensity effects together) on both iron and steel and paper and pulp industries is negative while it is positive for aluminum and textiles. The intensity effect for all the industries, barring textiles, is negative showing improvement in energy efficiency; iron and steel in particular, has seen a decrease of 134 PJ in energy consumption owing to improvements in efficiency. However, energy intensity in textiles has risen by 47 PJ due to increased mechanization. Structural effect is positive in aluminum and iron and steel industries indicating a movement towards higher energy-intensive products. In the case of aluminum, positive structural effect dominates over negative intensive effect whereas negative intensive effect dominates iron and steel industry. The paper helps in designing policies for improving productivity and reduce energy consumption in India's manufacturing sector. - Highlights: → The study develops physical energy intensity indicators in industrial sub-sectors of India. → It identifies technological and other options for reduction in energy consumption. → The study quantifies savings in energy as well as CO 2 emissions. → The indicators are useful in examining structural changes.

The demand for labor and capital inputs in irish manufacturing-industries, 1953-1973

OpenAIRE

Boyle, G.E.; Sloane, P.D.

1982-01-01

Precis: Factor-demand functions are estimated, for two types of labour (wage-earners and salaried-workers) and capital, for 40 manufacturing industries. Two sets of elasticity results are reported. The first set implicitly assumes Hicks-neutral technical change. The second set by including a time trend as an additional explanatory variable, relaxes this constraint. The magnitudes of the elasticity estimates are greater for the specification which includes the time trend. In the latter case, f...

Role of embodied energy in the European manufacturing industry: Application to short-term impacts of a carbon tax

International Nuclear Information System (INIS)

Bordigoni, Mathieu; Hita, Alain; Le Blanc, Gilles

2012-01-01

Role of energy in the manufacturing industry is a major concern for energy and environmental policy design. Issues like energy prices, security of supply and carbon mitigation are often connected to the industry and its competitiveness. This paper examines the role and consequences of embodied energy in the European industry. To this end, a multi-regional input–output analysis including 59 industrial sectors for all European Union countries and 17 more aggregated industries for other regions of the World is developed. Other segments of the economy are not included. This base is combined with energy consumption, carbon emission as well as bilateral trade data for every sector in all included countries. Our main result is that embodied energy in manufactured products' imports represents a significant aspect of the energy situation in European industries, with quantities close to the direct energy consumption. These flows can further be broken down for detailed analysis at the sector level thanks to the number of distinct industries included. Results demonstrate that an important part of embodied energy inside European products is not concerned with domestic energy price changes. In addition, a European-wide carbon tax would induce an unbalanced burden on industries and countries. - Highlights: ► We calculate embodied energy and carbon flows in the European and World industry. ► A multi-regional input–output analysis is used with a detailed nomenclature. ► National industries' energy prices dependence is a domestic issue. ► With a European carbon tax energy-intensive industries would be penalised. ► Such a tax may also induce competition distortion among EU countries.

Energy policies for increased industrial energy efficiency: Evaluation of a local energy programme for manufacturing SMEs

International Nuclear Information System (INIS)

Thollander, Patrik; Danestig, Maria; Rohdin, Patrik

2007-01-01

The most extensive action targeting the adoption of energy efficiency measures in small- and medium-sized manufacturing industries in Sweden over the past 15 years was project Highland. This paper presents an evaluation of the first part of this local industrial energy programme, which shows an adoption rate of more than 40% when both measures that have already been implemented and measures that are planned to be implemented are included. A comparison between this programme and another major ongoing programme for the Swedish energy-intensive industry indicates that the approach used in project Highland aimed at small- and medium-sized industries is an effective way to increase energy efficiency in the Swedish industry. The major barriers to energy efficiency among the firms were related to the low priority of the energy efficiency issue

SVM-Based Dynamic Reconfiguration CPS for Manufacturing System in Industry 4.0

Directory of Open Access Journals (Sweden)

Hyun-Jun Shin

2018-01-01

Full Text Available CPS is potential application in various fields, such as medical, healthcare, energy, transportation, and defense, as well as Industry 4.0 in Germany. Although studies on the equipment aging and prediction of problem have been done by combining CPS with Industry 4.0, such studies were based on small numbers and majority of the papers focused primarily on CPS methodology. Therefore, it is necessary to study active self-protection to enable self-management functions, such as self-healing by applying CPS in shop-floor. In this paper, we have proposed modeling of shop-floor and a dynamic reconfigurable CPS scheme that can predict the occurrence of anomalies and self-protection in the model. For this purpose, SVM was used as a machine learning technology and it was possible to restrain overloading in manufacturing process. In addition, we design CPS framework based on machine learning for Industry 4.0, simulate it, and perform. Simulation results show the simulation model autonomously detects the abnormal situation and it is dynamically reconfigured through self-healing.

Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries: potential for exposure.

Science.gov (United States)

Bekker, Cindy; Brouwer, Derk H; Tielemans, Erik; Pronk, Anjoeka

2013-04-01

In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the potential MNM exposure scenarios within relevant industrial sectors, applied exposure controls, and number of workers potentially exposed to MNM in Dutch industrial sectors producing and applying MNM-enabled end products in the Netherlands. A survey was conducted in three phases: (i) identification of MNM-enabled end products; (ii) identification of relevant industrial sectors; and (iii) a tiered telephone survey to estimate actual use of the products among 40 sector organizations/knowledge centres (Tier 1), 350 randomly selected companies (Tier 2), and 110 actively searched companies (Tier 3). The most dominant industrial sectors producing or applying MNM-enabled end products (market penetration >5%) are shoe repair shops, automotive, construction, paint, metal, and textile cleaning industry. In the majority of the companies (76%), potential risks related to working with MNM are not a specific point of interest. The total number of workers potentially exposed to MNM during the production or application of MNM-enabled end products was estimated at approximately 3000 workers in the Netherlands. The results of this study will serve as a basis for in-depth exposure and health surveys that are currently planned in the Netherlands. In addition, the results can be used to identify the most relevant sectors for policy makers and future studies focussing on evaluating the risks of occupational exposure to MNM.

78 FR 41069 - Medical Device Reporting for Manufacturers; Draft Guidance for Industry and Food and Drug...

Science.gov (United States)

2013-07-09

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-D-0743] Medical Device Reporting for Manufacturers; Draft Guidance for Industry and Food and Drug Administration Staff; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and...

Transfer of ochratoxin A from raw black tea to tea infusions prepared according to the Turkish tradition.

Science.gov (United States)

Toman, Jakub; Malir, Frantisek; Ostry, Vladimir; Kilic, Mehmet Akif; Roubal, Tomas; Grosse, Yann; Pfohl-Leszkowicz, Annie

2018-01-01

Ochratoxin A (OTA) is a natural contaminant of food including tea with multiple toxic effects, which poses a threat to human health. In terms of lifestyle, the Turkish population is a frequent visitor of tearooms, and the traditional Turkish tea preparation is one of the most popular ways of preparing tea infusion. The aim of this study was to investigate OTA transfer from raw black tea to the tea infusion prepared according to the Turkish tradition. A high-performance liquid chromatography method with a limit of quantification of 0.35 ng g -1 was used for OTA determination. The OTA amount in raw black teas from Turkey ranged from ≤0.35 ng g -1 up to 56.7 ng g -1 . An homogenised sample of black tea naturally contaminated with 55.0 ng g -1 was used to prepare infusions. The OTA transfer from the black tea to the infusion was found to be 41.5% ± 7%. These data are important for the realisation of a 'Total Diet study' (TDS). The TDS can be a complementary tool to estimate the population dietary exposure to OTA across the entire diet by analysing main foods prepared 'as consumed' (tea infusions) and not 'as purchased' (raw tea). © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

US and Turkish preschoolers' observational knowledge of astronomy

Science.gov (United States)

Saçkes, Mesut; McCormick Smith, Mandy; Cabe Trundle, Kathy

2016-01-01

The purpose of this cross-cultural study was to describe and compare US and Turkish children's observational knowledge of the day and night cycle and to identify similarities predicted by framework theory. Fifty-six (27 US and 29 Turkish) young children (ages 48-60 months) participated in the study. Semi-structured interviews were individually conducted, digitally recorded, transcribed, and analyzed using the constant comparative method. The results demonstrate that preschoolers from the two cultures are able to make comparable informal observations of the sky, and their observational knowledge includes many similarities, with one exception, as predicted by framework theory. US children were more likely to perform better than the Turkish children on the question about the time of observation for the moon. Although science concepts and skills are better represented in US early childhood education programs than the Turkish program, the results suggest that this advantage did not translate into performance differences between US and Turkish children.

Introducing a Novel Hybrid Artificial Intelligence Algorithm to Optimize Network of Industrial Applications in Modern Manufacturing

Directory of Open Access Journals (Sweden)

Aydin Azizi

2017-01-01

Full Text Available Recent advances in modern manufacturing industries have created a great need to track and identify objects and parts by obtaining real-time information. One of the main technologies which has been utilized for this need is the Radio Frequency Identification (RFID system. As a result of adopting this technology to the manufacturing industry environment, RFID Network Planning (RNP has become a challenge. Mainly RNP deals with calculating the number and position of antennas which should be deployed in the RFID network to achieve full coverage of the tags that need to be read. The ultimate goal of this paper is to present and evaluate a way of modelling and optimizing nonlinear RNP problems utilizing artificial intelligence (AI techniques. This effort has led the author to propose a novel AI algorithm, which has been named “hybrid AI optimization technique,” to perform optimization of RNP as a hard learning problem. The proposed algorithm is composed of two different optimization algorithms: Redundant Antenna Elimination (RAE and Ring Probabilistic Logic Neural Networks (RPLNN. The proposed hybrid paradigm has been explored using a flexible manufacturing system (FMS, and results have been compared with Genetic Algorithm (GA that demonstrates the feasibility of the proposed architecture successfully.

Manufacturing radioactive material for medical, research and industrial applications

International Nuclear Information System (INIS)

Seidel, C.W.

1992-01-01

Hospitals, clinics and other medical complexes are among the most extensive users of radioactive material. Nuclear medicine uses radioactive solutions of Tc-99m, Tl-201, Ga-67, I-123, Xe-133 and other radiopharmaceuticals as diagnostic tools to evaluate dynamic functions of various organs in the body, detect cancerous tumors, sites of infection or other bodily dysfunctions. Examples of monitoring blood flow to the brain of a cocaine addict will be shown. Many different radionuclides are also produced for life science research and industrial applications. Some require long irradiations and are needed only periodically. Radiopharmaceutical manufactures look for reliable suppliers that can produce quality product at a reasonable cost. Worldwide production of the processed and unprocessed radionuclides and the enriched stable nuclides that are the target materials used in the accelerators and reactors around the world will be discussed. (author)

ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

OpenAIRE

Nafees Ahmed Memon; Qazi Muhammad Moinuddin Abro; Zubair Ahmed Memon

2011-01-01

Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System) in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The constr...

Genetic diversity of disease-associated loci in Turkish population.

Science.gov (United States)

Karaca, Sefayet; Cesuroglu, Tomris; Karaca, Mehmet; Erge, Sema; Polimanti, Renato

2015-04-01

Many consortia and international projects have investigated the human genetic variation of a large number of ethno-geographic groups. However, populations with peculiar genetic features, such as the Turkish population, are still absent in publically available datasets. To explore the genetic predisposition to health-related traits of the Turkish population, we analyzed 34 genes associated with different health-related traits (for example, lipid metabolism, cardio-vascular diseases, hormone metabolism, cellular detoxification, aging and energy metabolism). We observed relevant differences between the Turkish population and populations with non-European ancestries (that is, Africa and East Asia) in some of the investigated genes (that is, AGT, APOE, CYP1B1, GNB3, IL10, IL6, LIPC and PON1). As most complex traits are highly polygenic, we developed polygenic scores associated with different health-related traits to explore the genetic diversity of the Turkish population with respect to other human groups. This approach showed significant differences between the Turkish population and populations with non-European ancestries, as well as between Turkish and Northern European individuals. This last finding is in agreement with the genetic structure of European and Middle East populations, and may also agree with epidemiological evidences about the health disparities of Turkish communities in Northern European countries.

Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

Energy Technology Data Exchange (ETDEWEB)

2017-01-01

The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model

Science.gov (United States)

Jadhav, J. R.; Mantha, S. S.; Rane, S. B.

2015-06-01

The demands for automobiles increased drastically in last two and half decades in India. Many global automobile manufacturers and Tier-1 suppliers have already set up research, development and manufacturing facilities in India. The Indian automotive component industry started implementing Lean practices to fulfill the demand of these customers. United Nations Industrial Development Organization (UNIDO) has taken proactive approach in association with Automotive Component Manufacturers Association of India (ACMA) and the Government of India to assist Indian SMEs in various clusters since 1999 to make them globally competitive. The primary objectives of this research are to study the UNIDO-ACMA Model as well as ISM Model of Lean implementation and validate the ISM Model by comparing with UNIDO-ACMA Model. It also aims at presenting a roadmap for Lean implementation in Indian automotive component industry. This paper is based on secondary data which include the research articles, web articles, doctoral thesis, survey reports and books on automotive industry in the field of Lean, JIT and ISM. ISM Model for Lean practice bundles was developed by authors in consultation with Lean practitioners. The UNIDO-ACMA Model has six stages whereas ISM Model has eight phases for Lean implementation. The ISM-based Lean implementation model is validated through high degree of similarity with UNIDO-ACMA Model. The major contribution of this paper is the proposed ISM Model for sustainable Lean implementation. The ISM-based Lean implementation framework presents greater insight of implementation process at more microlevel as compared to UNIDO-ACMA Model.

Directory of the manufacturers and suppliers for the French wind power industry; Annuaire des fabricants et fournisseurs de l'industrie eolienne 2010-2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

With over 5, 660 MW installed in end-2010, France ranks fourth in Europe, behind Germany, Spain and Italy. The wind power industry currently employs almost 11, 000 people in France throughout the value chain. In 2009, the first edition of this directory listed over one hundred companies working in around twenty different areas. Encouraged by these initial positive results, and with the help of ADEME, the French syndicate for renewable energies (SER) asked Capgemini Consulting to undertake a study to identify and raise awareness among French industrials likely to enter into the wind energy market. The French Ministry for Ecology, Energy, Sustainable Development and the Sea, along with the Ministry for the Economy, Finance and Employment, were involved in the work. 400 companies were questioned as part of the study. Over 150 replies testified to the dynamic character of the wind power market in France and overseas, and the opportunities for diversification that it represents for traditional industries like metallurgy, aeronautics, defence and shipyards, etc. The study led to the creation of the initiative Windustry France, which currently groups over 300 companies either active in the French wind power market or set to enter it. Windustry France is a showcase of the industrial know-how that can be used in the wind power industry both onshore and offshore. It includes local set-ups developed around major fields of activity (e.g. car industry, aeronautics, mechanics, etc.) and industrial port zones (Dunkerque, Rouen/Le Havre, Brest, Nantes Saint-Nazaire, Bordeaux, etc.). Several ministries, regional stakeholders and authorities are also involved (local authorities, Regional directorates for industry, research and the environment (DReal) networks and chambers of commerce and industry), all of which contribute to making Windustry France a collective approach to industrial policy. The 2010-2011 edition of the directory of manufacturers and suppliers for the wind power

Environmentally benign silicon solar cell manufacturing

Energy Technology Data Exchange (ETDEWEB)

Tsuo, Y.S. [National Renewable Energy Lab., Golden, CO (United States); Gee, J.M. [Sandia National Labs., Albuquerque, NM (United States); Menna, P. [National Agency for New Technologies Energy and Environment, Portici (Italy); Strebkov, D.S.; Pinov, A.; Zadde, V. [Intersolarcenter, Moscow (Russian Federation)

1998-09-01

The manufacturing of silicon devices--from polysilicon production, crystal growth, ingot slicing, wafer cleaning, device processing, to encapsulation--requires many steps that are energy intensive and use large amounts of water and toxic chemicals. In the past two years, the silicon integrated-circuit (IC) industry has initiated several programs to promote environmentally benign manufacturing, i.e., manufacturing practices that recover, recycle, and reuse materials resources with a minimal consumption of energy. Crystalline-silicon solar photovoltaic (PV) modules, which accounted for 87% of the worldwide module shipments in 1997, are large-area devices with many manufacturing steps similar to those used in the IC industry. Obviously, there are significant opportunities for the PV industry to implement more environmentally benign manufacturing approaches. Such approaches often have the potential for significant cost reduction by reducing energy use and/or the purchase volume of new chemicals and by cutting the amount of used chemicals that must be discarded. This paper will review recent accomplishments of the IC industry initiatives and discuss new processes for environmentally benign silicon solar-cell manufacturing.

Environmental health survey in asbestos cement sheets manufacturing industry.

Science.gov (United States)

Ansari, F A; Bihari, V; Rastogi, S K; Ashquin, M; Ahmad, I

2007-01-01

About 673 small-scale asbestos mining and milling facilities and 33 large - scale asbestos manufacturing plants, (17 asbestos-cement product manufacturing plants and 16 other than asbestos-cement product plants) are situated in India. The present study reveals the exposure of commercial asbestos (chrysotile) in the occupational as well as ambient air environment of the asbestos-cement (AC) sheets industry using membrane filter method of Bureau of Indian Standards (BIS). The fibre concentrations in 15 samples collected in the occupational environment at ingredient feeding site, sheet-producing site, fibre godown were 0.079, 0.057 and 0.078 f/cc, respectively and in five samples from surrounding ambient air at factory gate resulted fibre concentration of 0.071 f/cc. All the samples have shown fibre concentration lower than the threshold limit values (TLVs) prescribed by BIS. Morphological analysis of samples, further under phase contrast and polarized microscopy indicates the presence of chrysotile asbestos, which acts as carcinogen as well as co-carcinogen. A clinical examination of exposed subjects reveals that there was no case of clubbing, crepitation, ronchi and dyspnea on exertion; however, obstruction and restriction were 10.9 per cent and 25 per cent in exposed subjects, respectively while in control there were 12 per cent and 28 per cent, respectively. The study revealed that chrysotile asbestos is emitted in the occupational as well as ambient environment that may cause adverse health impact.

Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

Science.gov (United States)

Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

2017-09-01

Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

Pretreatment of Real Wastewater from the Chocolate Manufacturing Industry through an Integrated Process of Electrocoagulation and Sand Filtration

OpenAIRE

García-Morales, Marco A.; Juárez, Julio César González; Martínez-Gallegos, Sonia; Roa-Morales, Gabriela; Peralta, Ever; del Campo López, Eduardo Martin; Barrera-Díaz, Carlos; Miranda, Verónica Martínez; Blancas, Teresa Torres

2018-01-01

The purpose of this study was to evaluate the efficiency of removal of suspended solids in terms of turbidity, color, and chemical oxygen demand (COD) when integrating the electrocoagulation process using aluminum sacrificial anodes and the sand filtration process as a pretreatment of wastewater from the chocolate manufacturing plant in Toluca, México. Wastewater from the chocolate manufacturing industry used in this study is classified as nontoxic, but is characterized as having a high conte...

E-Learning Turkish Language and Grammar: Analyzing Learners' Behavior

Science.gov (United States)

Georgalas, Panagiotis

2012-01-01

This study analyses the behavior and the preferences of the Greek learners of Turkish language, who use a particular e-learning website in parallel with their studies, namely: http://turkish.pgeorgalas.gr. The website offers free online material in Greek and English language for learning the Turkish language and grammar. The traffic of several…

Psychometric properties of Frustration Discomfort Scale in a Turkish sample.

Science.gov (United States)

Ozer, Bilge Uzun; Demir, Ayhan; Harrington, Neil

2012-08-01

The present study assessed the psychometric properties of the Frustration Discomfort Scale for Turkish college students. The Frustration Discomfort Scale (FDS), Procrastination Assessment Scale-Student, and Rosenberg Self-Esteem Scale were administered to a sample of 171 (98 women, 73 men) Turkish college students. The results of the confirmatory factor analysis yielded fit index values demonstrating viability of the four-dimensional solution as in the original. Findings also revealed that, as predicted, the Discomfort Intolerance subscale of Turkish FDS was most strongly correlated with procrastination. Overall results provided evidence for the factor validity and reliability of the Turkish version of the scale for use in a Turkish population.

Design of Intelligent Manufacturing Big Data Cloud Service Platform

Directory of Open Access Journals (Sweden)

Cai Danlin

2018-01-01

Full Text Available With the coming of the intelligent manufacturing, the technology and application of industrial big data will be popular in the future. The productivity, competitiveness and innovation of the manufacturing industries will be improved through the integrated innovation of big data technology and industries. Besides, products, production process, management, services, new form and new models will be more intellectualized. They will support the transformation and upgrading of manufacturing industry and the construction of an open, shared and collaborative ecological environment for intelligent manufacturing industry.

PARENTING AND SOCIAL ROLES IN TURKISH TRADITIONAL FAMILIES: ISSUES AND CHOICES IN PARENTING FOR TURKISH EXPATRIATE FAMILIES LIVING IN BUCHAREST

OpenAIRE

Ahmet ECIRLI

2012-01-01

This article looks into the issues and challenges of parenting in Turkish families upholding traditional values that live in Bucharest, the capital of Romania. Based on theoretical mainstreams on parenting and the structure of Turkish families, a qualitative research was designed with two aims. The first was to describe the issues and choices in parenting for Turkish expatriate families living in a foreign country. The second was to find out to which of the three ideal-types of families accor...

Simulation and gaming as a support tool for lean manufacturing systems - a case example from industry

NARCIS (Netherlands)

van der Zee, DJ; Slomp, J; Kuhl, M.E.; Steiger, N.M.; Armstrong, F.B.; Joines, J.

2005-01-01

In this article we illustrate how simulation and gaming can be used to support lean manufacturing systems. More in particular we study a case example from industry - a manual assembly line for mail-inserting systems - for which we have developed a simulation game. This paper focuses on the

[Strengthening of social participation of Turkish seniors].

Science.gov (United States)

Fietz, Jennifer; Stupp, Barbara

2018-05-04

Traditional municipal services are not successful at reaching Turkish seniors. Compared to native Germans Turkish seniors have a lower social participation. Do native language groups hosted by a German organization promote the social participation of Turkish seniors? How does social participation take place in the ZWAR networks (between work and retirement; a project to strengthen social participation of seniors) and which factors promote or reduce social participation? Qualitative structuring content analysis of two group discussions, which were based on guided interviews. The social participation of Turkish-speaking seniors was strengthened on three levels: (1) through regular meetings of the Turkish ethnic group social relationships were promoted and German language skills and other skills were improved. Through mutual sharing and understanding of the stressors specific to migration, emotional support was provided. The sharing of mutual cultural and linguistic backgrounds created a sense of community and meetings were perceived as an antidote to migrants' exhausting lives in German society. (2) At the organizational level, participation was promoted through extensive group events. Regardless of their cultural background all participants identified as equal ZWAR members. The ZWAR project functioned as an umbrella organization for participation in the intercultural context. (3) Participation in community events created contacts with community stakeholders and fostered volunteer work. Hence, participants were able to use their skills, and therefore broaden their horizons. Turkish ZWAR networks promoted the social participation of members because integration with their ethnic group reduced access barriers, broadened members' scopes of action, and created new opportunities for participation.

Modelling and forecasting Turkish residential electricity demand

International Nuclear Information System (INIS)

Dilaver, Zafer; Hunt, Lester C

2011-01-01

This research investigates the relationship between Turkish residential electricity consumption, household total final consumption expenditure and residential electricity prices by applying the structural time series model to annual data over the period from 1960 to 2008. Household total final consumption expenditure, real energy prices and an underlying energy demand trend are found to be important drivers of Turkish residential electricity demand with the estimated short run and the long run total final consumption expenditure elasticities being 0.38 and 1.57, respectively, and the estimated short run and long run price elasticities being -0.09 and -0.38, respectively. Moreover, the estimated underlying energy demand trend, (which, as far as is known, has not been investigated before for the Turkish residential sector) should be of some benefit to Turkish decision makers in terms of energy planning. It provides information about the impact of past policies, the influence of technical progress, the impacts of changes in consumer behaviour and the effects of changes in economic structure. Furthermore, based on the estimated equation, and different forecast assumptions, it is predicted that Turkish residential electricity demand will be somewhere between 48 and 80 TWh by 2020 compared to 40 TWh in 2008. - Research highlights: → Estimated short run and long run expenditure elasticities of 0.38 and 1.57, respectively. → Estimated short run and long run price elasticities of -0.09 and -0.38, respectively. → Estimated UEDT has increasing (i.e. energy using) and decreasing (i.e. energy saving) periods. → Predicted Turkish residential electricity demand between 48 and 80 TWh in 2020.

FACTORS INFLUENCING ORGANIZATIONAL STRUCTURE IN THE FOOD MANUFACTURING, CHEMICAL, AGRICULTURAL WHOLESALING AND BIOTECHNOLOGY INDUSTRIES

OpenAIRE

Maude Roucan-Kane

2009-01-01

The objective of this study is to identify factors determining a business investment strategy (i.e., the choice of investment commitment and form of organizational structure) in the food manufacturing, chemical, agricultural wholesaling and biotechnology industries. Propositions regarding strategic alliance theories are tested on over 400 inter-firm collaborative agreements using secondary data from major US and European companies for the 1994-97 period. Results suggest that transactions with...

Manufacturing technology in the Danish pig slaughter industry.

Science.gov (United States)

Hinrichsen, Lars

2010-02-01

The Danish pig meat industry is very export oriented. Ninety per cent of the production of the big cooperative slaughterhouses is exported to more than 100 countries all over the world. This poses a requirement for the industry to be globally competitive in the sense of quality, product safety and--of course--price. A big challenge for the industry is therefore to maintain sufficient low unit costs in spite of the high factor costs of Denmark. In particular the high labour costs must be accompanied by correspondingly high labour productivity. And, it should be emphasized, this high labour productivity must be achieved without compromising the concern for good working conditions of the employees in the manufacturing. Technology is one of the means to achieve this combination of good working conditions and high labour productivity. One of the most important benefits from automation is the improved working environment. Pig slaughtering, cutting and boning is traditionally very labour intensive and requires hard and repetitive work. For many people a job in a slaughterhouse is therefore not their first choice. This situation can be changed by automation, which will not only reduce arduous and repetitive work but in addition will introduce more motivating jobs in terms of planning, supervision and control of the new technology. Automation will also improve the hygiene and thereby the food safety. This applies in particular to the clean slaughter line where cross contamination between carcasses is reduced because of less manual handling and because the tools in the machines can be sterilised more effectively between each carcass. Automated processes are more accurate and repeatable than manual work. For some processes, in particular in cutting and boning, this will enhance the product yield. New technology can also improve the animal welfare. The group-stunning system and mechanised lairage systems are examples of that. Improved animal welfare has an ethical value in

Using microwave Doppler radar in automated manufacturing applications

Science.gov (United States)

Smith, Gregory C.

Since the beginning of the Industrial Revolution, manufacturers worldwide have used automation to improve productivity, gain market share, and meet growing or changing consumer demand for manufactured products. To stimulate further industrial productivity, manufacturers need more advanced automation technologies: "smart" part handling systems, automated assembly machines, CNC machine tools, and industrial robots that use new sensor technologies, advanced control systems, and intelligent decision-making algorithms to "see," "hear," "feel," and "think" at the levels needed to handle complex manufacturing tasks without human intervention. The investigator's dissertation offers three methods that could help make "smart" CNC machine tools and industrial robots possible: (1) A method for detecting acoustic emission using a microwave Doppler radar detector, (2) A method for detecting tool wear on a CNC lathe using a Doppler radar detector, and (3) An online non-contact method for detecting industrial robot position errors using a microwave Doppler radar motion detector. The dissertation studies indicate that microwave Doppler radar could be quite useful in automated manufacturing applications. In particular, the methods developed may help solve two difficult problems that hinder further progress in automating manufacturing processes: (1) Automating metal-cutting operations on CNC machine tools by providing a reliable non-contact method for detecting tool wear, and (2) Fully automating robotic manufacturing tasks by providing a reliable low-cost non-contact method for detecting on-line position errors. In addition, the studies offer a general non-contact method for detecting acoustic emission that may be useful in many other manufacturing and non-manufacturing areas, as well (e.g., monitoring and nondestructively testing structures, materials, manufacturing processes, and devices). By advancing the state of the art in manufacturing automation, the studies may help

Mental health of Turkish women in Germany

DEFF Research Database (Denmark)

Bromand, Z; Temur-Erman, S; Yesil, R

2012-01-01

The purpose of the present study was to examine the protective and risk factors of mental distress among Turkish women living in Germany.......The purpose of the present study was to examine the protective and risk factors of mental distress among Turkish women living in Germany....

Manufacturing Capacity Utilization and Industrial Development in ...

African Journals Online (AJOL)

FIRST LADY

utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

Lean Manufacturing Auto Cluster at Chennai

Science.gov (United States)

Bhaskaran, E.

2012-10-01

Due the presence of lot of automotive Industry, Chennai is known as Detroit of India, that producing over 40 % of the Indian vehicle and components. Lean manufacturing concepts have been widely recognized as an important tool in improving the competitiveness of industries. This is a continuous process involving everyone, starting from management to the shop floor. Automotive Component Industries (ACIs) in Ambattur Industrial Estate, Chennai has formed special purpose vehicle (SPV) society namely Ambattur Industrial Estate Manufacturers Association (AIEMA) Technology Centre (ATC) lean manufacturing cluster (ATC-LMC) during July 2010 under lean manufacturing competitiveness scheme, that comes under National Manufacturing Competitiveness Programme of Government of India. The Tripartite Agreement is taken place between National Productivity Council, consultants and cluster (ATC-LMC). The objective is to conduct diagnostic study, study on training and application of various lean manufacturing techniques and auditing in ten ACIs. The methodology adopted is collection of primary data/details from ten ACIs. In the first phase, diagnostic study is done and the areas for improvement in each of the cluster member companies are identified. In the second phase, training programs and implementation is done on 5S and other areas. In the third phase auditing is done and found that the lean manufacturing techniques implementation in ATC-LMC is sustainable and successful in every cluster companies, which will not only enhance competitiveness but also decrease cost, time and increase productivity. The technical efficiency of LMC companies also increases significantly.

Recycling industrial waste in brick manufacture. Part 1

Directory of Open Access Journals (Sweden)

Andreola, F.

2005-12-01

Full Text Available The ongoing accumulation of industrial waste speaks to the need to seek cost-effective disposal methods. Brick manufacture would appear to be particularly promising in this regard. The present study analyzes the possibility of recycling the sludge generated in porcelain tile polishing, as well as coal, steel and municipal incinerator ash to make a special type of facing brick whose properties readily accommodate a full analysis of all the problems deriving from the incorporation of residue in its manufacture. Physical-chemical, mechanical and structural analyses were performed on bricks made with varying percentages of the different types of waste considered. This first paper reports the results of the physical arid technological characterization of the products; the second part of the research will address their chemical, mechanical and structural properties.

El continuo aumento de la cantidad de residuos (desechos que se generan en los procesos industriales induce a buscar nuevos métodos alternativos a la disposición final que sean altamente eficientes y a bajo costo. La industria manufac turera de ladrillos resulta muy prometedora desde este punto de vista. En este trabajo ha sido investigada la posibilidad de usar distintos residuos industriales, entre ellos barros de pulido del gres porcelánico. cenizas de carbón, cenizas de acerías y de incinerador municipal para la fabricación de ladrillos de exteriores. Fueron analizados los problemas que podrían derivar al introducir estos residuos en la pasta. En particular, en esta primera parte del trabajo se muestran los resultados derivados de la introducción de los residuos considerados, en distintos porcentajes, sobre las propiedades físicas y tecnológicas del producto final. En la segunda parte se desarrollarán los efectos causados sobre las propiedades químicas, mecánicas y microestructurales.

Manufacturing Growth with Social Deficits. Environmental and Labour Issues in the High Tech Industry of Penang, Malaysia

DEFF Research Database (Denmark)

Wangel, Arne

2001-01-01

The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part of the p......The economic downturn in 1997 was less severe in Malaysia compared to other countries in the region. However, as the manufacturing sector, in particular the high tech industries, lacks a strong national technological base and depends on exports, structural problems remain. The first part...... of the paper briefly provides key indicators of the economic recession. The second part describes the origin and structure of the high tech sector in Malaysia. Impressive growth has been achieved only as accompanied by a deepening dependency on trends in the global computer industry. The absence of innovative...... capacity makes it difficult to escape production segments, in which labour cost remains a key parameter. Thus, the competitive position of Malaysia is unstable and may erode. In the third part, the pattern of interests of the major stakeholders: authorities, corporate managers, workers, trade unions...

Quantity versus Quality in Turkish Higher Education.

Science.gov (United States)

Arslan, Hasan

This paper asserts that there have not been adequate studies about the comparative quality of Turkish universities to provide information and data for prospective students, advisors, university administrators, and policymakers. Turkey has more than 70 state and private universities. Most of these are relatively new, although Turkish higher…

Turkish Political Market and the Perception of Political Parties

Directory of Open Access Journals (Sweden)

Cihat Polat

2015-06-01

Full Text Available This study attempts to describe the Turkish political market and determine where and how Turkish political parties are perceived by voters. The study uses a two-dimensional map to determine the voter perceptions of the parties in the Turkish political market based on a survey questionnaire applied to 400 young voters. It also investigates whether there are any major differences in the perception of parties in the political space based on voter ideologies. The study finds that young voters have clear perceptions of the positions of Turkish parties. It also finds that voter perceptions of parties vary based on voters’ ideological positions.

Industrial garnet

Science.gov (United States)

Olson, D.W.

2000-01-01

The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

Manufacturing consumption of energy 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

Industrial Engineering

DEFF Research Database (Denmark)

Karlsson, Christer

2015-01-01

Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

Statistical and Computational Techniques in Manufacturing

CERN Document Server

2012-01-01

In recent years, interest in developing statistical and computational techniques for applied manufacturing engineering has been increased. Today, due to the great complexity of manufacturing engineering and the high number of parameters used, conventional approaches are no longer sufficient. Therefore, in manufacturing, statistical and computational techniques have achieved several applications, namely, modelling and simulation manufacturing processes, optimization manufacturing parameters, monitoring and control, computer-aided process planning, etc. The present book aims to provide recent information on statistical and computational techniques applied in manufacturing engineering. The content is suitable for final undergraduate engineering courses or as a subject on manufacturing at the postgraduate level. This book serves as a useful reference for academics, statistical and computational science researchers, mechanical, manufacturing and industrial engineers, and professionals in industries related to manu...

The Impact Analysis of Direct Public R&D and Innovation Investments in Turkish Space Sector

Science.gov (United States)

Kaya, Derya; Cakir, Serhat

2016-07-01

According to The Organisation for Economic Co-operation and Development (OECD), space sector plays a pivotal role in the functioning of modern societies and their economic development. It is in the scope of OECD's International Futures Programme. The global space economy, as defined by the OECD Space Forum, comprises the space industry's core activities in space manufacturing and in satellite operations, plus other consumer activities that have been derived over the years from governmental research and development. In 2013 commercial revenues generated by the space economy amounted to USD 256.2 billion globally that is huge amount of space investment in the world. Recently, Turkey has also entered to the sector and it has growing strategic interest in space. First satellite project was started with a technology transfer from UK by TUBITAK Space Technologies Research Institute in 2001 and it launched to its orbit in 2003. Then RASAT and GÖKTÜRK-2 satellites were developed and launched to their orbits respectively in 2011 and 2012. Today, we have other satellite projects that are going on, too. However, we do not have a mechanism or a model to assess the impacts of those projects. What kind of model can be used to measure the impact of direct public R&D and innovation investments in Turkish space sector? The aim of this study is to develop a model which would be useful for monitoring the performance of R&D and Innovation investments that are conducted through government policies and strategies and so on to give feedback for effective strategy making. When we look at the impact analysis studies in Turkey, we see a few such as TUBITAK (Özçelik and Taymaz, 2008; Erden, 2010; Tandoǧan, 2011), İşkur (World Bank Report, 2013), Ministry of Economy (TTGV, 2013), Development Agencies (İZKA, 2011; Elçi vd., 2011; Pınar, 2014; Meydan, 2014). There is need for a systematic approach to impact analysis. Since there is no data for this study, we would develop a model with

JAIF's 23rd nuclear industry survey: strengthening industrial foundations under low economic growth

International Nuclear Information System (INIS)

Anon.

1983-01-01

Each year since the beginning of nuclear development in Japan, Japan Atomic Industrial Forum has conducted the survey of the nuclear-related aspects in mining and manufacturing industries, electric utilities, trading firms, etc., regarding their expenditures, sales and personnel. The results of the 23rd survey for fiscal 1981 (April, 1981, to March, 1982,) are described. The salient points in the year, as compared with fiscal 1980, are as follows: (trend in expenditures) nuclear-related expenditures exceeded yen2 trillion, up 12 %; the operation and maintenance costs of electric utilities varied, but overall, up 25 %; the nuclear-related expenditures of mining and manufacturing industries were up 34 %; (trend in sales) the new record in mining and manufacturing industries - the sales topped yen1 trillion; the sales of reactor equipments rose by 59 %; the sales by mining and manufacturing industries to electric utilities up 42 %; the nuclear-related exports of mining and manufacturing industries grew by 13 %; the revenues and sales exceeded the expenditures in mining and manufacturing industries. (Mori, K.)

The theory of constraints applied in a manufacture CAD-CAM system in the industry Metalworking-plastic

Directory of Open Access Journals (Sweden)

Luis Juiña

2017-06-01

Full Text Available In the following project, the theory of constraints was applied in order to implement a manufacture CAD-CAM system into the metal mechanic industry processes of polymers injection and blown of polymers. The research showed that the manufacture of the mold with the engraving took 223,17 hours. In the workflow for the manufacture of the mold, a restriction was found in the outsource service of CNC. It took 120 hours of the whole process and represent the 51,47 % the total time of tooling manufacturing. There is also a constraint found in the design time. It was 60 hours that corresponds to 26,88 % of the overall time. In order to reduce the time, a modern system of design in 3D and CAM was established to improve the model process of design and manufacture. A simulation by computational resource was applied to the plastic. The design was changed from 2D to 3D. The implementation was focused in the design. A software was installed to improve the speed of modeling methods with reliable information. In the manufacture of molds, a new CNC machine was acquired with three simultaneous axes to eliminate the outsource service. By acquiring the design system, the working time was diminished in 79% and regarding to the CNC process, the working time was improved in 88%.

THE ROLE OF PROMOTION ON MARKETING IN TURKISH DRUG INDUSTRY

Directory of Open Access Journals (Sweden)

Emrah Bilgener

2004-08-01

Full Text Available Abstract\tMarketing has an important role in modern life. Marketing provides economical and social bene-fits with correleating between producers and consumers.\tPromotional activities are necessary for better marketing strategies. Therefore, firms have to give more importance to promotional activities. Promotional activities are marketing instruments that an-nounced all the knowledges about the products and services to their consumers, for surviving and de-veloping the firms.\tNowadays drug producers are marketing their products all arround the world. But, drugs are not ordinary products, for this reason more importance must be given to drug marketing andpromotion.\tThe purpose of this study is to determine the role of promotion within the marketing in Turkish Drug Industry. The material of this study is an uniform questionnaire with 41 questions applied to about 190-200 medical representatives who work in Çorum, Yozgat, Amasya and Tokat cities for 37 firms which are the members of Federation of Employer’s Organization in Pharmaceutical Industry and 14 firms which are profited by the services of this federation.\tIn this study, SPSS program (ver7.5 has been used for evaluation of the data. According to the re-sults, medical represantatives think that the drug sales will increase and wait the data of IMS (Inform Medicines Statistics will rise about 60-80%. 90% of the medical represantatives believe that the pa-ramedical activities are effective and 73% of them carry out paramedical studies.\tÖzet\tPazarlama modern yasantida önemli bir role sahiptir. Pazarlama üreticiler ve tüketiciler arasinda bir iliski kurarak, ekonomik ve sosyal faydalar saglar. Tanitim faaliyetleri daha iyi bir pazarlama stratejisi için gereklidir. Bu nedenle sirketler daha iyi bir pazarlama stratejisi için tanitim faaliyetlerine önem vermelidir. Tanitim faaliyetleri, isletmenin ürettigi mal ve hizmetleri tüketicilere duyuran, isletmenin gelisimini ve yasamasini

ISO in the Construction and Manufacturing Companies: A Case Study from the Construction Industry of Hyderabad and Karachi, Pakistan

Directory of Open Access Journals (Sweden)

Nafees Ahmed Memon

2011-04-01

Full Text Available Construction industry plays very important role in development of any country. The development of construction industry depends to a larger extent on quality of construction productions and projects. Quality of construction productions and projects is linked with the implementation of QMS (Quality Management System in construction organizations. ISO certification is one of the QMS which has been adopted in manufacturing and construction industry at the global level. The construction companies of developing countries have reaped many advantages from the effective implementation of ISO standards. The rate of adoption of ISO standards has remained slow in the construction sector of some developing countries like Pakistan. This paper presents the literature review of ISO in global construction industry. It highlights the advantages, disadvantages and barriers faced by construction companies in the implementation of ISO standards. This study also investigates the level of adoption of ISO standards in construction and manufacturing companies of Pakistan through a questionnaire survey. It presents the comparison of ISO standards\\\\\\' adoption in both construction and manufacturing sectors. The paper puts forward some suggestions and recommendation for the better adoption and improvement of ISO implementation in the construction sector of Pakistan. This study emphasizes that construction companies of Pakistan should learn from the benefits reaped by the construction companies of developed countries and take appropriate measures for implementing ISO standards. It also suggests that public sector clients should make it obligatory for the contractors and consultants to have ISO certification before awarding the works in order to enhance the the adoption of ISO standards in construction sector.

Towards the re-industrialization of Europe a concept for manufacturing for 2030

CERN Document Server

Westkämper, Engelbert

2014-01-01

Not only are European industries shrinking and experiencing diminishment of their capability to add value, but Europe has lost more than a third of its GDP, which had been primarily based on manufacturing, and it suffers the consequences in high unemployment and weakened states finance. This book is intended as a significant contribution to the on-going European discussions after the economic crisis and the economic problems in many regions. It is meant to enrich actual political dialogues for overcoming the crises by activating new potentials of high added value. As such, it seeks to provide the necessary orientation for enacting fundamental changes of business models and factory capabilities in order to meet the challenges of the global economy and minimizing environmental impacts. It also opens perspectives for enterprise strategies and for further research topics. Concrete recommendations are made for fields of action and future development towards achieving a sustainable industrial sector in Europe. ‘T...

Questioning the Scholarly Discussion around Decentralization in Turkish Education System

Science.gov (United States)

Yildiz, Soner Onder

2016-01-01

From the beginning of Turkish Republic till date, Turkish Education System (TES) has been steered by a handful of politicians and civil servants, who enjoy maximum centralized authority. Over the years, therefore, centralized management has repeatedly been blamed for the deadlocks hampering progress in the TES. Turkish scholars often seem to find…

Estimates of emergency operating capacity in US manufacturing and nonmanufacturing industries - Volume 1: Concepts and Methodology

Energy Technology Data Exchange (ETDEWEB)

Belzer, D.B. (Pacific Northwest Lab., Richland, WA (USA)); Serot, D.E. (D/E/S Research, Richland, WA (USA)); Kellogg, M.A. (ERCE, Inc., Portland, OR (USA))

1991-03-01

Development of integrated mobilization preparedness policies requires planning estimates of available productive capacity during national emergency conditions. Such estimates must be developed in a manner to allow evaluation of current trends in capacity and the consideration of uncertainties in various data inputs and in engineering assumptions. This study developed estimates of emergency operating capacity (EOC) for 446 manufacturing industries at the 4-digit Standard Industrial Classification (SIC) level of aggregation and for 24 key nonmanufacturing sectors. This volume lays out the general concepts and methods used to develop the emergency operating estimates. The historical analysis of capacity extends from 1974 through 1986. Some nonmanufacturing industries are included. In addition to mining and utilities, key industries in transportation, communication, and services were analyzed. Physical capacity and efficiency of production were measured. 3 refs., 2 figs., 12 tabs. (JF)

Factors and Drivers Effecting the Decision of Using Off-Site Manufacturing (OSM Systems in House Building Industry

Directory of Open Access Journals (Sweden)

Hussein Elnaas

2014-01-01

Full Text Available Much has been written on Off-site Manufacturing (OSM in construction, particularly regarding the perceived benefits and barriers to implementation. However, there seems to be a wide misunderstanding of the state of OSM associated with the concept of decision by many of those involved in decision making process within the house building industry. This has led to a demand for guidance’s on decision making process for construction project leaders particularly at early project stages. Choosing a construction method for a project will require an optimum decision strategy which involves careful understanding, measurement and evaluation of a number of decision factors that can have the most influence on successful decision action. This paper, therefore, aims to identify the key decision factors to be considered at evaluation stage when choosing to use Off-Site Manufacturing (OSM as a construction strategy in house building projects. This will reveal the key drivers for change in the industry towards the use of OSM in house building.

Selection of Technology in Global Manufacturing Industries

DEFF Research Database (Denmark)

Bruun, Peter

1997-01-01

not work well. The host country's business and cultural environment must be taken into account in designing a production system which requires attention to the management elements of technology transfer. This paper presents a model for transfer of manufacturing technology to a foreign site based......Transferring a manufacturing system to another country has proven to be problematic for most multinational firms. Selection of the appropriate production process and technology is a critical decision as transplantation of an existing system from another country without adaptation usually does...... on a sociotechnical system approach. It views the decisions for selecting and implementing a production system as a five stage process. The first step is determining the strategic goals of the foreign plant followed by selection of the production process and manufacturing system types. The last stages involve...

Design, Manufacturing and Integration of LHC Cryostat Components an Example of Collaboration between CERN and Industry

CERN Document Server

Slits, Ivo; Canetti, Marco; Colombet, Thierry; Gangini, Fabrizio; Parma, Vittorio; Tock, Jean-Philippe

2006-01-01

The components for the LHC cryostats and interconnections are supplied by European industry. The manufacturing, assembly and testing of these components in accordance with CERN technical specifications require a close collaboration and dedicated approach from the suppliers. This paper presents the different phases of design, manufacturing, testing and integration of four LHC cryostat components supplied by RIAL Vacuum (Parma, Italy), including 112 Insulation Vacuum Barriers (IVB), 482 Cold-mass Extension Tubes (CET), 121 cryostat vacuum vessel Jumper Elbows (JE) and 10800 Interconnection Sleeves (IS). The Quality Assurance Plan, which the four projects have in common, is outlined. The components are all leak-tight thin stainless steel assemblies (<10-8 mbar l/s), most of them operating at cryogenic temperature (2 K), however each having specific requirements. The particularities of each component are presented with respect to manufacturing, assembly and testing. These components are being integrated ...

A model to enable indirect manufacturing options transactions between organisations: An application to the ceramic industry

International Nuclear Information System (INIS)

Rodriguez-Rodriguez, R.; Gomez-Gasquet, P.; Oltra-Badenes, R. F.

2014-01-01

In the current competitive contexts, it is widely accepted and proved that inter-enterprise collaboration lead in many occasions to better results. The Spanish ceramic industry must improve, dropping its manufacturing costs in order to be able to compete with low cost products coming from Asia. In this sense, this work presents the main results obtained from applying an innovative model, which facilitates the transfer of manufacturing options between two ceramic enterprises that share a common supplier in the scenario where one of them needs more manufacturing capacity than the one booked according to its demand forecast and the another need less. Then, some decisional mechanisms are applied, which output the values for certain parameters in order to augment the benefit of all the three participants. With the application of this model better organisational results both economic and of service level are achieved. (Author)

THE TRANSLATING PROBLEMS OF CONTEMPORARY TURKISH DIALECTS (BETWEEN THE NEW UYGUR TURKISH DIALECT AND TURKEY TURKISH DIALECT ÇAĞDAŞ TÜRK ŞİVELERİ ARASINDA AKTARMA MESELELERİ (YENİ UYGUR TÜRKÇESİ – TÜRKİYE TÜRKÇESİ ÖRNEĞİ

Directory of Open Access Journals (Sweden)

Dr. M. Fatih ALKAYIŞ

2009-05-01

Full Text Available The translating of the books, writing with Contemporary Turkish Dialects, requires some attentions about the suffixes, words, concepts and centences to get an impressive form. By this way counfusions of meaning, between the Turkish Dialects, can be prevented.The New Uygur Turkish Dialect, thought as an Eastern Turkish Dialect at the classification of Turkish Language, is nearer to the characteristics of Old Turkish Language according to the Turkey Turkish Dialect, thought as a western Turkish Dialects. We can get a classification of translating problems, between the New Uygur Language and Turkey Turkish Language, in those titles: Verb moods, participles, gerundiums.With the solving of the problems between Contemporary Turkish Dialects, Turkish world will understand each other well, and also will be nearer. Çağdaş Türk şiveleriyle yazılmış eserleri bir şiveden başka bir şiveye aktarırken dikkat edilmesi gereken hususların başında “ek, kelime, kavram ve cümleleri” aynı etkiyi yaratacak biçimde çevirmek gelmektedir. Bu sayede anlam veya şekil bulanıklığı ortadan kalkar.Türk şivelerinin tasnifinde Doğu Türkçesinin bir kolu olarak kabul edilen Yeni Uygur Türkçesi, Batı Türkçesi içerisinde yer alan Türkiye Türkçesine oranla Eski Türkçenin şekil özelliklerine daha yakındır. Yeni Uygur Türkçesi ile Türkiye Türkçesi arasındaki aktarma meselelerini şu konular üzerinde ele alabiliriz: Fiil kipleri, sıfat-fiiller, zarf-fiiller. Çağdaş Türk şiveleri arasındaki aktarma meselelerinin çözümüyle Türk Dünyası birbirini daha iyi anlayacak ve birbirine daha çok yakınlaşacaktır.

Micro manufacturing techniques and applications

CERN Document Server

Du, Ruxu; Li, Zifu

2013-01-01

Micro/meso-scale manufacturing has been developed in research fields of machining, forming, materials and others, but its potential to industries are yet to be fully realized. The theme of the current volume was to build a bridge joining academic research and industrial needs in micro manufacturing. Among the 12 papers selected for publication are three keynote addresses onmicro and desktop factories for micro/meso-scale manufacturing applicationsand future visions, tissue cutting mechanics and applications for needlecore biopsy and guidance, and micro-texturing onto amorphous carbonmaterials

Greenhouse gas options, policy and measures for the Canadian Transportation Equipment Manufacturing Industry - Final report

International Nuclear Information System (INIS)

2000-02-01

This report summarizes and analyses the work that have been carried out by the Transportation Equipment Manufacturing Sector (TEMS) Working Group of the National Climate Change Industry Table over the last 14 months, and presents the Group's view of appropriate policies for greenhouse gas emission reduction in Canada. To develop its approach, the Working Group conducted five separate studies which are included in this report as annexes. Annex A is a Foundation Paper, which provides an overview of the sector's performance vis-a-vis energy use and greenhouse gas production. Annex B analyzes the competitive position of the industry by reviewing growth trends in each of the industry sub-sectors and the key factors in maintaining and enhancing the sector's international competitive position. Annex C is a technology assessment. It provides an overview of the uptake of energy saving technology in the sector. Annex D provides a facility level analysis focusing on energy use in the automotive parts manufacturing sector. Annex E is a review of American policies on climate change, summarizing the approach currently being taken towards greenhouse gas emission reduction in the United States. Some of the key findings of this report are: (1) business-as-usual emissions will greatly exceed the implicit Kyoto target of six per cent reduction from 1990 levels, (2) relatively few opportunities exist for major emissions reductions through the use of existing technology, (3) sector-specific policies appear to be ill-advised, but cross-cutting policies provide good opportunities for the transportation equipment manufacturing sector to do its part in helping Canada meeting its Kyoto commitment. The report recommends investigation of barriers to adoption of new technologies and examination of market imperfections, promotion of cogeneration where it makes economic sense, and consideration of the use of flexible instruments such as carbon taxes and tradable emission permits. Overall, the

#%Applications of artificial intelligence in intelligent manufacturing: a review

Institute of Scientific and Technical Information of China (English)

#

2017-01-01

#%Based on research into the applications of artificial intelligence (AI) technology in the manufacturing industry in recent years, we analyze the rapid development of core technologies in the new era of 'Internet plus AI', which is triggering a great change in the models, means, and ecosystems of the manufacturing industry, as well as in the development of AI. We then propose new models, means, and forms of intelligent manufacturing, intelligent manufacturing system architecture, and intelligent man-ufacturing technology system, based on the integration of AI technology with information communications, manufacturing, and related product technology. Moreover, from the perspectives of intelligent manufacturing application technology, industry, and application demonstration, the current development in intelligent manufacturing is discussed. Finally, suggestions for the appli-cation of AI in intelligent manufacturing in China are presented.

Manufacturing footprint optimisation: a necessity for manufacturing network in changing business environment

DEFF Research Database (Denmark)

Yang, Cheng; Farooq, Sami; Johansen, John

2010-01-01

Facing the unpredictable financial crisis, optimising the footprint can be the biggest and most important transformation a manufacturer can undertake. In order to realise the optimisation, fundamental understanding on manufacturing footprint is required. Different elements of manufacturing...... footprint have been investigated independently in the existing literature. In this paper, for the purpose of relationship exploration between different elements, manufacturing footprints of three industrial companies are traced historically. Based on them, four reasons for the transformation...

Concept Maps and Language: A Turkish Experience

Science.gov (United States)

Kilic, Gulsen Bagci

2003-01-01

Concept maps are being used by an increasing number of educators in Europe and the US. This paper has four goals. First, it discusses problems in developing Novak's style concept maps in Turkish caused by linguistic differences between Turkish and English. Second, it reports the findings of a research study conducted to adapt concept maps to…

Spring 2007. Industry Study. Manufacturing Industry

Science.gov (United States)

2007-01-01

their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

Milk-based traditional Turkish desserts

Directory of Open Access Journals (Sweden)

Tulay Ozcan

2009-12-01

Full Text Available Traditional foods are the reflection of cultural inheritance and affect the lifestyle habits. Culture can be viewed as a system of socially transmitted patterns of behaviour that characterises a particular group. Despite the fact of globalisation, these are key elements to accurately estimate a population’s dietary patterns and how these have been shaped through time. In Turkey, a meal with family or friends traditionally ends with a dessert, which is a testimony to the hosts’ hospitality or to the housewife’s love and affection for her husband and children, since sweets and desserts are important elements of Turkish cuisine. However, the consciousnesses of nutrition and healthy eating, due to rapid change in popular life style and dietary patterns, has contributed to the increased interest in traditional foods with potential health benefits, with increased uncertainty for dessert consumption. Dairy desserts are extensively consumed due to their nutritive and sensoric characteristics. Some of traditional dairy desserts are Mustafakemalpasa, Gullac, Kazandibi, Hosmerim and Tavukgogsu, which are mainly made from milk or fresh cheese, and the current paper discusses their manufacturing processes and composition.

Air Pollution and 'Dirty' Industries. How and Why Does the Composition of Manufacturing Output Change with Economic Development?

International Nuclear Information System (INIS)

Cole, M.A.

2000-01-01

This paper examines the impact on air pollution of changes in the composition of manufacturing output in developed and developing countries. Pollution emissions from manufacturing output are estimated in a manner which holds constant the effect of technology and regulations allowing the impact of compositional changes alone on pollution to be estimated. The paper has three main findings; (1) the inverted-U estimated between per capita income and the pollution intensity of GDP arises due to both the composition of manufacturing becoming cleaner and the share of manufacturing output in GDP falling. Compositional changes alone are not responsible for the inverted-U between per capita income and per capita emissions; (2) changes to the composition of manufacturing output are consistent with the pollution haven hypothesis, however there is clear evidence that rising per capita incomes are associated with a failing income elasticity of demand for 'dirty' products. This fact may explain the compositional changes that occur with development; (3) in addition to the income elasticity effect, the analysis suggests that land prices and to a lesser extent the prices of labour and capital, determine the proportion of dirty industry within a country's manufacturing sector. 27 refs

Accelerating Industrial Adoption of Metal Additive Manufacturing Technology

Science.gov (United States)

Vartanian, Kenneth; McDonald, Tom

2016-03-01

While metal additive manufacturing (AM) technology has clear benefits, there are still factors preventing its adoption by industry. These factors include the high cost of metal AM systems, the difficulty for machinists to learn and operate metal AM machines, the long approval process for part qualification/certification, and the need for better process controls; however, the high AM system cost is the main barrier deterring adoption. In this paper, we will discuss an America Makes-funded program to reduce AM system cost by combining metal AM technology with conventional computerized numerical controlled (CNC) machine tools. Information will be provided on how an Optomec-led team retrofitted a legacy CNC vertical mill with laser engineered net shaping (LENS®—LENS is a registered trademark of Sandia National Labs) AM technology, dramatically lowering deployment cost. The upgraded system, dubbed LENS Hybrid Vertical Mill, enables metal additive and subtractive operations to be performed on the same machine tool and even on the same part. Information on the LENS Hybrid system architecture, learnings from initial system deployment and continuing development work will also be provided to help guide further development activities within the materials community.

Investigation of supply chain integration performance in export-focused manufacturing industry in China and an assessment of a local gymnastic products manufacturer.

OpenAIRE

Zhang, Chong

2008-01-01

The purpose of this dissertation is try to find out the gap between exported-focused Chinese manufacturing industry practice with world-class supply chain integration performance in developed countries. This is helpful to reveal and explain difficulties and obstacles that limit local suppliers to pursue better supply chain performance. A case study is used to analyze performance of a specific Chinese producer�¢����s supply chain and operations management. The results found out that wide...

"Old Oxen Cannot Plow": Stereotype Themes of Older Adults in Turkish Folklore.

Science.gov (United States)

Marcus, Justin; Sabuncu, Neslihan

2016-12-01

Although much research has established the nature of attitudes and stereotypes toward older adults, there are conflicting explanations for the root cause of ageism, including the sociocultural view and interpersonal views, that age bias against older adults is uniquely a product of modernity and occurs through social interactions, and the evolutionary view and intraindividual views, that age bias against older adults is rooted in our naturally occurring and individually held fear of death. We make initial investigations into resolving this conflict, by analyzing literature from a society predating the Industrial Revolution, the society of Ottoman Turks. Using Grounded Theory, we analyzed 1,555 Turkish fairy tales of the most well-known older adult in Turkish folklore, Nasreddin Hoca, for stereotype themes of older adults. Using the same method, we then analyzed 22,000+ Turkish sayings and proverbs for the same themes. Results indicated older adults to be viewed both positively and negatively. Positive stereotypes included wisdom, warmth, deserving of respect, and retirement. Negative stereotypes included incompetence, inadaptability, and frailty/nearing of death. Older females were viewed more negatively relative to older males. Results indicated views of older adults to parallel those found in contemporary research. Results have implications for the design of interventions to reduce ageism and on the cross-cultural generalizability of age-based stereotypes. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Importance of Advanced Planning of Manufacturing for Nuclear Industry

Directory of Open Access Journals (Sweden)

Shykinov Nick

2016-06-01

Full Text Available In the context of energy demands by growing economies, climate changes, fossil fuel pricing volatility, and improved safety and performance of nuclear power plants, many countries express interest in expanding or acquiring nuclear power capacity. In the light of the increased interest in expanding nuclear power the supply chain for nuclear power projects has received more attention in recent years. The importance of the advanced planning of procurement and manufacturing of components of nuclear facilities is critical for these projects. Many of these components are often referred to as long-lead items. They may be equipment, products and systems that are identified to have a delivery time long enough to affect directly the overall timing of a project. In order to avoid negatively affecting the project schedule, these items may need to be sourced out or manufactured years before the beginning of the project. For nuclear facilities, long-lead items include physical components such as large pressure vessels, instrumentation and controls. They may also mean programs and management systems important to the safety of the facility. Authorized nuclear operator training, site evaluation programs, and procurement are some of the examples. The nuclear power industry must often meet very demanding construction and commissioning timelines, and proper advanced planning of the long-lead items helps manage risks to project completion time. For nuclear components there are regulatory and licensing considerations that need to be considered. A national nuclear regulator must be involved early to ensure the components will meet the national legal regulatory requirements. This paper will discuss timing considerations to address the regulatory compliance of nuclear long-lead items.

A Turkish study of medical student learning styles.

Science.gov (United States)

Kalaca, S; Gulpinar, M

2011-12-01

A good understanding of the learning styles of students is necessary for optimizing the quality of the learning process. There are few studies in Turkey on the subject of the learning characteristics of medical students. The aim of this study was to define the learning patterns of Turkish medical students based on the Turkish version of Vermunts Inventory of Learning Styles (ILS). The Turkish version of the ILS was developed and administered to 532 medical students. Learning patterns were investigated using factor analysis. Internal consistencies of scales ranged from 0.43 to 0.80. The Turkish version of the ILS identified four learning styles among medical students. In comparing the pre-clinical and clinical phases of medical students related to mental models of learning, statistically significant differences (p learning characteristics: lack of regulation; certificate; self-test and ambivalent orientation; intake of knowledge; and use of knowledge. The Turkish version of the ILS can be used to identify learning styles of medical students. Our findings indicate an intermediate position for our students on a teacher-regulated to student-regulated learning continuum. A variety of teaching methods and learning activities should be provided in medical schools in order to address the range of learning styles.

Energy efficiency and CO_2 mitigation potential of the Turkish iron and steel industry using the LEAP (long-range energy alternatives planning) system

International Nuclear Information System (INIS)

Ates, Seyithan A.

2015-01-01

With the assistance of the LEAP (long-range energy alternatives planning) energy modeling tool, this study explores the energy efficiency and CO_2 emission reduction potential of the iron and steel industry in Turkey. With a share of 35%, the steel and iron industry is considered as the most energy-consuming sector in Turkey. The study explores that the energy intensity rate can be lowered by 13%, 38% and 51% in SEI (slow-speed energy efficiency improvement), AEI (accelerating energy efficiency improvement) and CPT (cleaner production and technology scenario) scenarios, respectively. Particularly the projected aggregated energy savings of the scenarios CPT and AES are very promising with saving rates of 33.7% and 23% respectively. Compared to baseline scenarios, energy efficiency improvements correspond to economic potential of 0.1 billion dollars for SEI, 1.25 dollars for AEI and 1.8 billion dollars for CPT scenarios annually. Concerning GHG (greenhouse gas) emissions, in 2030 the iron and steel industry in Turkey is estimated to produce 34.9 MtCO_2 in BAU (business-as-usual scenario), 32.5 MtCO_2 in SEI, 24.6 MtCO_2 in AEI and 14.5 MtCO_2 in CPT a scenario which corresponds to savings of 9%–39%. The study reveals that energy consumption and GHG emissions of the iron and steel industry can be lowered significantly if the necessary measures are implemented. It is expected that this study will fill knowledge gaps pertaining to energy efficiency potential in Turkish energy intensive industries and help stakeholders in energy intensive industries to realize the potential for energy efficiency and GHG mitigation. - Highlights: • This paper explores energy efficiency potential of iron and Steel industry in Turkey. • We applied the LEAP modeling to forecast future developments. • Four different scenarios have been developed for the LEAP modeling. • There is a huge potential for energy efficiency and mitigation of GHG emissions.

A Turkish translation of the Nordic Occupational Skin Questionnaire (NOSQ-2002/LONG) adapted for young workers in high-risk jobs.

Science.gov (United States)

Aktas, Emine; Esin, Melek Nihal

2016-03-01

Occupational skin diseases (OSDs) represent 10-40% of all occupational diseases in many industrialized countries. Young workers are frequently exposed to toxic substances and chemicals in the workplace. The occupational conditions of young workers can impose a high level of risk for the occurrence of OSDs. The Nordic Occupational Skin Questionnaire (NOSQ-2002) was developed in English as a new, comprehensive, standardized tool with which to screen for OSDs. The purpose of this study was to translate the NOSQ-2002 into Turkish and to culturally adapt the long version of the instrument for use with young workers in jobs with high risk for the occurrence of OSDs. Forward and back translations were carried out. Problematic items were modified until the Turkish-language version achieved a satisfactory consensus with the original version of the NOSQ-2002. The final Turkish version was tested in 40 randomly selected young workers with and without OSDs who were studying in the fields of hairdressing, jewelry making, and car mechanics at vocational training schools run by the National Education Ministry. When the original questionnaire had been translated into the target language, a first consensus version was evaluated by an expert panel. The expert panel determined that 36 questions (63.2%) in the Turkish version required some level of modification in order to facilitate clear understanding. Cognitive interviews were then performed. After some modification, the final Turkish version was established and tested among young workers. The new Turkish version of the NOSQ is a comprehensible, reliable, and useful tool that can be applied to young workers in specific occupations. © 2015 The International Society of Dermatology.

Comparison of arch forms between Turkish and North American

Directory of Open Access Journals (Sweden)

Ahmet A. Celebi

2016-04-01

Full Text Available ABSTRACT Objective: The aim of this study was to clarify the morphological differences in the mandibular arches of Turkish and North American white subjects. Methods: The sample included 132 Turkish (34 Class I, 58 Class II, and 40 Class III and 160 North American (60 Class I, 50 Class II, and 50 Class III subjects. The most facial portion of 13 proximal contact areas was digitized from photocopied images of patients' mandibular dental arches. Clinical bracket points were calculated for each tooth based on mandibular tooth thickness data. Four linear and two proportional measurements were taken. The subjects were grouped according to arch form types (tapered, ovoid and square in order to have frequency distribution compared between ethnic groups in each Angle classification. Results: The Turkish group showed significantly lower molar depth and more significant molar width-depth (W/D ratio in all three Angle classifications. On the other hand, the Turkish group also showed a significantly larger intercanine width in Class III malocclusion and intermolar width in Class II malocclusion. The most frequent arch forms seen were the ovoid arch form in the Turkish group and the tapered form in the white group. Conclusions: Our results demonstrate that when treating Turkish patients, one should expect to use preformed ovoid arch form orthodontic wires in a significant percentage of patients.

The many faces of Turkish Odessa

DEFF Research Database (Denmark)

Skvirskaja, Vera

2014-01-01

between Turkish newcomers and various Turkic-speaking groups in the area both create different and overlapping “ecumenical communities” and actualize long-forgotten connections or marginal historical visions. These migrants also generate important links to the area through marriage and intimate relations...... with Slav women. I argue that alliances between Turkish migrants and Turkic-speaking minorities and local women not only allow them to make the city their own, but also create a distance from wider Odessan society....

An Analysis on Reading Texts in Teaching Turkish to Foreigners

Directory of Open Access Journals (Sweden)

Adem İŞCAN

2017-09-01

Full Text Available Being one of the four basic language skills, reading has a great importance in teaching Turkish to foreigners. It is required to develop reading skills to develop vocabulary. There have been some problems in teaching Turkish as second language. These problems are generally related to difference in alphabet, inadequacy of the sources used in teaching Turkish, methods and techniques used and the texts used. The basic sources used in teaching Turkish to foreigners are texts. This study aims at determination of the opinions of students in Gaziosmanpaşa University and Ondokuz Mayıs University Turkish Education and Application Center (TOMER concerning Turkish reading texts. General browsing method was used in the study. The questionnaire comprising of 24 items was applied to 25 students in beginner level and 7 students in advanced level. With this study, it is foreseen to arrange the texts being the key stone according to the wishes of and in compliance with the levels of students; giving importance to pre-reading, reading and post-reading activities and including questions with short-answer about the text as well as questions to develop high level skills.

The Production of Turkish Relative Clauses in Second Language Acquisition: Overcoming Student Difficulties

Directory of Open Access Journals (Sweden)

Anjel Toczu

2010-01-01

Full Text Available This study focuses on teaching relative clauses (R.Cs in Turkish, a left-branching language, and discusses the relative difficulty of producing RCs in Turkish by English-speaking learners by investigating whether the production of subject relative clauses in Turkish is easier than that of the object relative clauses. It also offers suggestions as to how to help learners overcome these difficulties. Turkish and English belong to two different language families, Altaic and Inda-European respectively. This study lends further insight that Turkish does not have RCs similar to those found in Inda-European languages. Instead, in Turkish RCs comprise nominalized verbs and participles. The characteristics of Turkish are also explained such as its word order, agglutinating morphology, vowel and consonant harmony rules as well as case markers indicating grammatical relations between sentence constituents, which shed light to our understanding of RCs in Turkish. Data was collected through written and oral tasks from students enrolled in a military intensive Turkish language training program in the United States. Moreover, their performance was studied through classroom observations and one-on-one speaking activities.

Personality traits of Turkish handgun license applicants.

Science.gov (United States)

Selek, Salih; Can, Serdar S; Yabanoglu, Ihsan

2012-10-01

Several theories have sought to explain the motivations for handgun possession and the relationship with personality. Perception of handguns also has cultural variations. The aim of the study is to evaluate handgun license applicants' personality profiles. 109 handgun license applicants were included in the study. Temperament and Character Inventory (TCI) scores of the applicants were recorded. Scores were compared with Turkish and American normative data for the Inventory. The study group had significantly lower subscores on novelty seeking, harm avoidance, and higher subscores on reward dependence and persistence compared to Turkish norms and significantly lower subscores on novelty seeking, reward dependence, and self-directedness compared to American norms. Results indicate that Turkish handgun license applicants' personality features are more similar to American norms.

Make or buy decisions in and levels of logistics outsourcing: an empirical analysis in the food manufacturing industry

NARCIS (Netherlands)

Hsin-I Hsiao, L.; Kemp, R.G.M.; Vorst, van der J.G.A.J.; Omta, S.W.F.

2009-01-01

The objective of this paper is to study the determinants of outsourcing of different levels of logistics activities in the food manufacturing industry. In our research, four different levels of logistics activities were examined: (1st level) transportation, (2nd level) packaging, (3rd level)

Opinions of Turkish Language and Literature Teachers on the Curriculum of Turkish Literature Course Based on the Constructivist Learning Theory

Science.gov (United States)

Epcacan, Cahit

2013-01-01

The main objective of this study is to collect the opinions of Turkish Language and Literature teachers at secondary schools about the Curriculum of the Turkish Literature Course based on the constructivist learning theory. To this end, the descriptive method was employed to collect teacher opinions. Structured interview was used as a data…

A Taxonomy of Manufacturing Strategies

OpenAIRE

Jeffrey G. Miller; Aleda V. Roth

1994-01-01

This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

Initiatives to Improve Quality of Additively Manufactured Parts

Science.gov (United States)

Waller, Jess; Nichols, Charles

2017-01-01

NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

Overview of the Photovoltaic Manufacturing Technology (PVMaT) project

International Nuclear Information System (INIS)

Witt, C.E.; Mitchell, R.L.; Mooney, G.D.

1993-08-01

The Photovoltaic Manufacturing Technology (PVMaT) project is a historic government/industry photovoltaic (PV) manufacturing R ampersand D partnership composed of joint efforts between the federal government (through the US Department of Energy) and members of the US PV industry. The project's ultimate goal is to ensure that the US industry retains and extends its world leadership role in the manufacture and commercial development of PV components and systems. PVMaT is designed to do this by helping the US PV industry improve manufacturing processes, accelerate manufacturing cost reductions for PV modules, improve commercial product performance, and lay the groundwork for a substantial scale-up of US-based PV manufacturing capacities. Phase 1 of the project, the problem identification phase, was completed in early 1991. Phase 2, the problem solution phase, which addresses process-specific problems of specific manufacturers, is now underway with an expected duration of 5 years. Phase 3 addresses R ampersand D problems that are relatively common to a number of PV companies or the PV industry as a whole. These ''generic'' problem areas are being addressed through a teamed research approach

Generic Challenges and Automation Solutions in Manufacturing SMEs

DEFF Research Database (Denmark)

Grube Hansen, David; Malik, Ali Ahmad; Bilberg, Arne

Evermore research is conducted on smart manufacturing, digital manufacturing and other aspects of what is expected from the fourth industrial revolution known as Industry 4.0. Most of the research of Industry 4.0 is currently a better fit for large corporations than for SMEs, which in Europe howe...

Subcontracting in electronics : from contract manufacturers to providers of electronic manufacturing services (EMS)

OpenAIRE

Liemt van, Gijsbert

2007-01-01

Discusses how the top contract manufacturers in the electronics industry try to become providers of electronic manufacturing services by deepening and broadening the rage of services that they offer and by diversifying into markets other than computing and telecommunications.

75 FR 80040 - Manufacturing Council

Science.gov (United States)

2010-12-21

..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

Industrial based volume manufacturing of lightweight aluminium alloy panel components with high-strength and complex-shape for car body and chassis structures

Science.gov (United States)

Anyasodor, Gerald; Koroschetz, Christian

2017-09-01

To achieve the high volume manufacture of lightweight passenger cars at economic cost as required in the automotive industry, low density materials and new process route will be needed. While high strength aluminium alloy grades: AA7075 and AA6082 may provide the alternative material solution, hot stamping process used for high-strength and ultrahigh strength steels such as boron steel 22mnb5 can enable the volume manufacture of panel components with high-strength and complex-shape for car body and chassis structures. These aluminium alloy grades can be used to manufacture panel components with possible yield strengths ≥ 500 MPa. Due to the differences in material behaviors, hot stamping process of 22mnb5 cannot be directly applied to high strength aluminium alloy grades. Despite recorded successes in laboratories, researches and niche hot forming processes of high strength aluminium alloy grades, not much have been achieved for adequate and efficient volume manufacturing system applicable in the automotive industry. Due to lack of such system and based on expert knowledge in hot stamping production-line, AP&T presents in this paper a hot stamping processing route for high strength aluminium alloys been suitable for production-line development and volume manufacturing.

Cognitive testing in non-demented Turkish immigrants

DEFF Research Database (Denmark)

Nielsen, T. Rune; Vogel, Asmus M.; Gade, Anders

2012-01-01

Nielsen, T. R. Vogel, A., Gade, A. & Waldemar, G. (2012). Cognitive testing in healthy Turkish immigrants - comparison of the RUDAS and the MMSE. Scandinavian Journal of Psychology 53, 455-460. Methods for culturally and linguistically appropriate cognitive testing of elderly minority populations...... are lacking in Europe. The aim of this study was to compare performance on the Rowland Universal Dementia Assessment Scale (RUDAS) and the Mini Mental State Examination (MMSE) in Turkish immigrants in Denmark and determine the impact of demographic and health-related variables on test performance. A sample...... of non-demented community-dwelling Turkish immigrants was recruited from the greater Copenhagen area. All participants completed a structured interview regarding demographic, physical and mental health status, as well as measures of depression and acculturation, and cognitive testing with the RUDAS...

Harmony in Life Scale - Turkish version: Studies of validity and reliability

Directory of Open Access Journals (Sweden)

Seydi Ahmet Satici

2017-11-01

Full Text Available Abstract This article presents the adaptation and psychometric evaluation of the Turkish version of Harmony in Life Scale (Turkish-HiL. The present paper investigates (study 1; N 1 = 253 confirmatory factor analysis, measurement invariance; (study 2; N 2 = 231 concurrent validity; (study 3; N 3 = 260 convergent and known-group validities; (study 4; N t − t = 50 test-retest, Cronbach alpha, and composite reliabilities of the Turkish-HiL. In study 1, based on a confirmatory factor analysis, results confirmed that unidimensional-factor structure. The results suggested that the model demonstrated a configural and metric invariance across the gender groups. In study 2, Turkish-HiL significantly correlated with measures of satisfaction with life, subjective happiness, positive affect, and negative affect. In study 3, Turkish-HiL was predicted positively by flourishing, conversely, negatively predicted by depression, anxiety, and stress. Finally, in study 4, alpha, composite and test-retest reliabilities are acceptable. Overall, the scale presented here may prove useful for satisfactorily assessing, in Turkish, the harmony in life of the university students.

Occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries

International Nuclear Information System (INIS)

Ballesteros, L.; Zarza, I.; Ortiz, J.; Serradell, V.

2006-01-01

The spanish 'Real Decatur 783/2001', published as result of the adaptation of the European Council directive 96/29/EURATOM (B.S.S. directive), regulates in Spain the use of natural radioactive substances. This decree establishes the need to study and control those activities in which significant increases of the exposure of workers or members of the public could take place. One of these natural radioactive substances are zirconium minerals. They are widely employed in some industrial activities, such as the production of zirconia and zirconium chemicals, glazed ceramic products manufacture, refractories, foundry sands (including investment casting) and zirconium mineral manufacturing. Its major end uses are fine ceramics where it acts as an opacifier in glazes and enamels and also as an additive in special glass (i.e. TV glass). This paper provides a description of a measurement campaign carried out to estimate the risk of occupational exposure to natural radioactivity in the zirconium mineral manufacturing industries. Zirconium raw sands have generally a granular size of 100 to 200 μm, which may be reduced to around 2 μm for use in ceramics and paint applications by milling to flour. These sands contain varying concentrations of natural radionuclides: 232 Th, 235 U, and mostly 238 U, together with their progenies. The first part of the study is to identify situations and areas where worker s are exposed to radiation. Five pathways of exposure were found: inhalation of dust, ingestion of dust, inhalation of radon, skin contamination and external irradiation. Samples from raw materials and from the environment at the work areas are performed; both where the zircon sands are unloaded and stored and at the milling area. Secondly, collected samples are analysed to evaluate activities on those natural radionuclides. Gamma spectrometry analysis is performed for the whole of the samples. For this purpose, a Ge-HP detector (high purity Ge detectors) is used. Dust samples

An application of the extended exergy accounting method to the Turkish society, year 2006

International Nuclear Information System (INIS)

Seckin, C.; Sciubba, E.; Bayulken, A.R.

2012-01-01

The Turkish society is analyzed, on the basis of a 2006 database, by means of the EEA (Extended Exergy Accounting) method. A brief synthesis of EEA is also presented, with the purpose of clarifying some of the issues related to its accounting technique. The system to be analyzed is assumed to be at steady state, and the input and output fluxes of matter and energy are expressed in terms of their respective exergy content. This study is intended to provide support for possible structural interventions aimed at the improvement of the degree of sustainability of the Country: since EEA allows for the conversion of the so-called “externalities”, i.e., of the immaterial fluxes of labour, capital and environmental remediation, into their exergetic equivalents, a more comprehensive and deeper insight of the resource consumption and of the environmental impact becomes possible. As usual in EEA analyses, the Turkish society has been modelled as an open thermodynamic system interacting with two “external” systems, namely “Environment” and “Abroad”, and consisting itself of seven internal subsystems: Extraction-, Conversion-, Transportation-, Agricultural-, Industrial-, Tertiary- and Domestic sector. -- Highlights: ► Extended Exergy Accounting Application to Turkish society 2006. ► Exergy transfers between sectors, environment and abroad. ► Exergetic equivalent of labour and capital fluxes. ► Environmental remediation cost computing for different sectors in Turkey. ► Sectoral efficiencies.

Cloud manufacturing: from concept to practice

Science.gov (United States)

Ren, Lei; Zhang, Lin; Tao, Fei; Zhao, Chun; Chai, Xudong; Zhao, Xinpei

2015-02-01

The concept of cloud manufacturing is emerging as a new promising manufacturing paradigm, as well as a business model, which is reshaping the service-oriented, highly collaborative, knowledge-intensive and eco-efficient manufacturing industry. However, the basic concepts about cloud manufacturing are still in discussion. Both academia and industry will need to have a commonly accepted definition of cloud manufacturing, as well as further guidance and recommendations on how to develop and implement cloud manufacturing. In this paper, we review some of the research work and clarify some fundamental terminologies in this field. Further, we developed a cloud manufacturing systems which may serve as an application example. From a systematic and practical perspective, the key requirements of cloud manufacturing platforms are investigated, and then we propose a cloud manufacturing platform prototype, MfgCloud. Finally, a public cloud manufacturing system for small- and medium-sized enterprises (SME) is presented. This paper presents a new perspective for cloud manufacturing, as well as a cloud-to-ground solution. The integrated solution proposed in this paper, including the terminology, MfgCloud, and applications, can push forward this new paradigm from concept to practice.

Re-examining psychometric properties of the Turkish form of the Guilt Inventory in a non-clinical and depression sample (Turkish

Directory of Open Access Journals (Sweden)

Burçin Akın

2018-03-01

Full Text Available Object: In the most general sense, guilt is conceptualized as a strong, intense and negative emotion that quickly emerges when people do not live up according to internal values, judgements and social standards or violate them. The aim of the present study was to investigate the factor structure of Guilt Inventory that developed by Kugler and Jones with confirmatory and explanatory factor analyses and reevaluate the psychometric properties of the new Turkish form in depression and non-clinical samples. Methods: For this purpose, 448 university students, 107 healthy controls and 56 adults diagnosed with depression were asked to fill out the questionnaire set consisted of the Guilt Inventory, Beck Depression Inventory, Disgust Scale- Revised Form and The State-Trait Anxiety Inventory-State Anxiety Form.Results: According to the results, original form of Guilt Inventory did not work at the desired level in Turkish culture. Confirmatory and exploratory factor analyzes revealed that the new form with 35 items and 3 subscales works much more appropriately. The analyses of group comparison and correlations with other scales indicated that Turkish version of the Guilt Inventory had satisfactory convergent, divergent and criterion validity. Additively, internal consistency, item-total correlations and Guttman split-half reliability coefficients showed that the Turkish form of Guilt Inventory had good reliability values which were comparable to the original version of the scale. Discussion: In conclusion, results revealed that the Turkish version of Guilt Inventory is a reliable and valid measurement tool.

Teacher Opinions on the Implementation of Values Education in Teaching Turkish

Science.gov (United States)

Kirbas, Abdulkadir

2017-01-01

The aim of this study is to determine the realization levels of values education implementations in teaching Turkish by taking the opinions of Turkish teachers. The sample of this study conducted in the survey model comprises 108 Turkish teachers employed at different secondary schools in Erzurum, Bayburt, Gümüshane and Trabzon in the Spring…

Investment promotion in the South African manufacturing industry: incentive comparisons with Malaysia and Singapore

Directory of Open Access Journals (Sweden)

Martha SI Wentzel

2014-05-01

Full Text Available South Africa needs to increase its inward foreign direct investment in order to achieve economic growth. The purpose of this article is to explore which intervention could be launched in the short term to enhance the country's attractiveness for foreign investors. The findings of the literature review demonstrated that incentives, as a determinant of investment, are the short-term intervention with the most significant potential to attract additional foreign direct investment. A comparative study, which provided insight into the incentives that are currently offered to the manufacturing sectors of three countries (South Africa, Malaysia and Singapore, assisted in identifying two additional incentives that the South African government could introduce and three existing incentives that could be amended. The introduction or modification of these incentives could ensure that South Africa has a competitive advantage to attract investment from foreign investors and thereby increase South Africa's inward foreign direct investment in the manufacturing industry.

Study on the Key Factor Parameters to Increase Productivity in Construction and Manufacturing Industries.

Science.gov (United States)

Almazyed, K.; Alaswad, A.; Olabi, A. G.

2016-02-01

Proper management of human and non-human resources in construction and manufacturing projects can give-in considerable savings in time and cost. Construction and Manufacturing industry faces issues in connection with problems related with productivity and the problems are usually connected with performance of employees. The performance of employees is affected by many factors. In this paper a survey was made on respondents who are employed various projects of Saudi Arabia. The researcher developed a theoretical framework from the existing research which was used as a Model to collect and analyze the field data to test the hypothesis. In this research activity three predictors (commitment, job satisfaction and job performance) for determining the change in productivity. The results highlight that commitment and job performance (respectively) are the two predictors which are explaining 37% of variation in the productivity of the companies. The results also show that Job Satisfaction has no role in the prediction of productivity.

Implementing Manufacturing as a Service : A Pull-Driven Agent-Based Manufacturing Grid

NARCIS (Netherlands)

Moergestel, Leo van; Puik, Erik; Telgen, Daniël; Meyer, John-Jules Ch.

2015-01-01

User requirements and low-cost small quantity production are new challenges for the modern manufacturing industry. This means that small batch sizes or even the manufacturing of one single product should be affordable. To make such a system cost-effective it should be capable to use the available

75 FR 71417 - Manufacturing Council Membership

Science.gov (United States)

2010-11-23

... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council Membership AGENCY... marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the... their travel, living and other personal expenses. Meetings are held regularly and not less than annually...

Psychometric evaluation of Turkish version of the Perceived Stress Scale with Turkish college students.

Science.gov (United States)

Kaya, Cahit; Tansey, Timothy N; Melekoglu, Macid; Cakiroglu, Orhan; Chan, Fong

2017-12-20

The Turkish version of the Perceived Stress Scale (T-PSS-10) measures the extent to which situations in one's life are appraised as stressful. The purpose of this study was to evaluate the measurement structure of T-PSS-10. Two-hundred and thirty-five Turkish university students (93 men and 142 women) completed the T-PSS-10, the Patient Health Questionnaire-9 (PHQ-9), the General Anxiety Disorder 7-Item Scale (GAD-7), and the Inventory of Common Problems (ICP). Confirmatory factor analysis results indicated that a one-factor model did not fit the data, whereas a two-factor correlated model (stress related self-efficacy beliefs, stress related feelings of helplessness) provided a better fit between the model and the data. Significant moderate correlations were found for the stress-related self-efficacy beliefs and stress-related feelings of helplessness factors with depression, anxiety, academic difficulty, relationship problems and health problems. The internal consistency reliability coefficients for the stress-related self-efficacy beliefs and stress-related feelings of helplessness factors were 0.68 and 0.85, respectively. This study provided support for the reliability and validity of T-PSS-10 suggesting that it can be used as a screening instrument by health professionals working with Turkish college students.

The German model of capitalism and the persistence of outward foreign direct investment: evidence from German manufacturing industries

Directory of Open Access Journals (Sweden)

Martin T Bohl

2011-06-01

Full Text Available Against the backdrop of critique on the German model of capitalism in general, and German public policy in particular as to the ability to successfully adjust to rapid change and exogenous shocks in wake of economic globalisation, this paper investigates the degree of shock persistence in foreign direct investment (FDI of ten German manufacturing industries for the period 1976 to 2003. Theory on exports and non-FDI investment suggests that FDI should exhibit a considerable degree of shock persistence because they are subject to high sunk costs because of high entry and exit costs associated with the high level of asset specificity that is normally connected to FDI. Persistence in foreign direct investment time series data is established by applying various unit root tests. The results are robust to the potential presence of structural breaks in the data. The empirical analysis shows that German outward FDI in mature manufacturing industries, with one exception, exhibits a high degree of shock persistence. The results suggest, at least for mature German industries, that the sunk costs view on shock persistency is confirmed for outward FDI. The results furnish evidence for a tentative assessment of the relationship between German public policy and FDI strategies of multinational firms.

Economics of Future Growth in Photovoltaics Manufacturing

Energy Technology Data Exchange (ETDEWEB)

Basore, Paul A.; Chung, Donald; Buonassisi, Tonio

2015-06-14

The past decade's record of growth in the photovoltaics manufacturing industry indicates that global investment in manufacturing capacity for photovoltaic modules tends to increase in proportion to the size of the industry. The slope of this proportionality determines how fast the industry will grow in the future. Two key parameters determine this slope. One is the annual global investment in manufacturing capacity normalized to the manufacturing capacity for the previous year (capacity-normalized capital investment rate, CapIR, units $/W). The other is how much capital investment is required for each watt of annual manufacturing capacity, normalized to the service life of the assets (capacity-normalized capital demand rate, CapDR, units $/W). If these two parameters remain unchanged from the values they have held for the past few years, global manufacturing capacity will peak in the next few years and then decline. However, it only takes a small improvement in CapIR to ensure future growth in photovoltaics. Any accompanying improvement in CapDR will accelerate that growth.

Secularity and religiosity: keystones of Turkish national identity

Directory of Open Access Journals (Sweden)

Sergey V. Olyunin

2011-01-01

Full Text Available According to many experts Turkish National Federation experiences crisis of its national identity. The article concerns the problem of secular and religious balance in Turkish nationalism. Special attention is attached to Turkey as a project and Turkey as a process, war factor in a birth of the nation, national idea reproduction, Islam nationalization and nationalism Islamisation.

Servitization in industry

CERN Document Server

2014-01-01

Presenting both a comprehensive collection of sectorial studies of servitization in manufacturing industries, on the one hand, and research investigating the necessity to adapt various processes and departments of manufacturing companies to servitized business models, on the other, ‘Servitization in Industry’ informs the scientific and managerial servitization debate with recent data regarding industrial servitization models. This book provides detailed analyses of manufacturing sectors that elucidate the options and barriers related to servitization from a sector-based perspective. This sector-based approach allows for an individual and in-depth examination of recent relationships among manufacturers and their clients by explaining leads and lags in servitization. Serving to maximize reader insight into the specific characteristics of different sectors with their barriers and potentials, the book presents frameworks for successful servitization of the core sectors in European manufacturing industries whi...

Slavic borrowings in modern Turkish language

Directory of Open Access Journals (Sweden)

Đinđić Marija

2006-01-01

Full Text Available This paper deals with Slavic borrowings in standard Turkish language Material for this paper was excerpted from the Dictionary of Turkish Standard Language (TDK Turküe Sozluk. Excerpted data which count just about 100 words were treated within lexical-semantic groups, also with pointing to certain inconsistencies in the lexicographic treatment: some words are not marked as Slavic (e.g. kumpir, som, pogrom; after some lexemes wrong etymon is stated (e.g. kopek and some of them are left without an etymon (e.g. bocuk, gocuk.

Whither North Carolina furniture manufacturing?

OpenAIRE

Robert L. Lacy

2004-01-01

North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

E-LEARNING TURKISH LANGUAGE AND GRAMMAR: Analyzing Learners' Behavior

Directory of Open Access Journals (Sweden)

Panagiotis GEORGALAS

2012-01-01

Full Text Available This study analyses the behavior and the preferences of the Greek learners of Turkish language, who use a particular e-learning website in parallel with their studies, namely: http://turkish.pgeorgalas.gr. The website offers free online material in Greek and English language for learning the Turkish language and grammar. The traffic of several modules of the website has been measured, examined and analyzed. The research was carried out between the years 2010- 2011 and included the analysis of several million clicks. The results show particular attitudes, habits and preferences throughout the e-learning process. There is a preference of users to exercises against theory. Fast cross-link exercises are preferred to slower “fill in” ones. During the weekends, visitors tend to use less e-learning facilities and select more light activities than the rest days of the week. Society trends and fashions like TV serials have a serious impact to the number of people who decide to learn a new foreign language, in particular Turkish. There is a strong preference of the audience to use online TV against online radio facilities for language practice. The subjects that Greek learners of Turkish language spend more time are verbs conjugation and vocabulary learning. They focus on elementary grammar subjects like the Alphabet, the numbers and the formation of plural. Finally, they try to learn the syntax of Turkish language through sentence structure puzzles and give priority to special grammar issues like noun compounds that are not present in Greek language.

Investment strategy for sustainable society by development of regional economies and prevention of industrial pollutions in Japanese manufacturing sectors

International Nuclear Information System (INIS)

Sueyoshi, Toshiyuki; Goto, Mika

2014-01-01

A balance between industrial pollution prevention and economic growth becomes a world-wide issue to develop a sustainable society in many industrial nations. To discuss the issue, this study proposes a new use of DEA environmental assessment to determine how to effectively allocate capital for developing regional industries. The amount of capital is used to invest for technology innovation for both local economic growth and environmental protection. In this study, the proposed approach separates outputs into desirable and undesirable categories. Inputs are also separated into two categories, one of which indicates an amount of investment on capital assets. The other category is used for production activities. The proposed approach unifies them by two disposability concepts. This study has evaluated the performance of manufacturing industries in 47 prefectures (local government units in Japan) by Unified Efficiency under Natural disposability (UEN), Unified Efficiency under Managerial disposability (UEM) and Unified Efficiency under Natural and Managerial disposability (UENM). The UENM is further separated into its two cases: with and without a possible occurrence on desirable congestion, or technology innovation, on undesirable outputs. This study has empirically confirmed that Japanese manufacturing industries need to make their efforts to reduce greenhouse gas emissions and air pollution substances by investing in technology innovation. Furthermore, most of economic activities are currently located at metropolitan regions (e.g., Tokyo) in Japan. To develop a sustainable society, Japan needs to allocate capital into regions with a high level of investment effectiveness by shifting the manufacturing industries from the metropolitan regions to much promising local areas identified in this study. Such a shift, along with technology innovation, makes it possible to reduce air pollutions in the entire Japan by balancing economic growth and pollution prevention. This

Additive manufacturing in production: challenges and opportunities

Science.gov (United States)

Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

2015-03-01

Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

Integrated and Intelligent Manufacturing: Perspectives and Enablers

Directory of Open Access Journals (Sweden)

Yubao Chen

2017-10-01

Full Text Available With ever-increasing market competition and advances in technology, more and more countries are prioritizing advanced manufacturing technology as their top priority for economic growth. Germany announced the Industry 4.0 strategy in 2013. The US government launched the Advanced Manufacturing Partnership (AMP in 2011 and the National Network for Manufacturing Innovation (NNMI in 2014. Most recently, the Manufacturing USA initiative was officially rolled out to further “leverage existing resources... to nurture manufacturing innovation and accelerate commercialization” by fostering close collaboration between industry, academia, and government partners. In 2015, the Chinese government officially published a 10-year plan and roadmap toward manufacturing: Made in China 2025. In all these national initiatives, the core technology development and implementation is in the area of advanced manufacturing systems. A new manufacturing paradigm is emerging, which can be characterized by two unique features: integrated manufacturing and intelligent manufacturing. This trend is in line with the progress of industrial revolutions, in which higher efficiency in production systems is being continuously pursued. To this end, 10 major technologies can be identified for the new manufacturing paradigm. This paper describes the rationales and needs for integrated and intelligent manufacturing (i2M systems. Related technologies from different fields are also described. In particular, key technological enablers, such as the Internet of Things and Services (IoTS, cyber-physical systems (CPSs, and cloud computing are discussed. Challenges are addressed with applications that are based on commercially available platforms such as General Electric (GE’s Predix and PTC’s ThingWorx.

TURKISH TRADE POLICY AND THE EFFICIENCY OF TURKISH COTTON MARKETS

OpenAIRE

Schmitz, Troy G.

1999-01-01

Turkish cotton markets are affected by import duties, export taxes, and a range of domestic subsidies. The degree of economic inefficiency arising from these government policies is estimated through the use of two partial equilibrium models, one for the Aegean market and another for the non-Aegean market. The welfare implications of these policies are also explored.

Micro/Nano manufacturing

DEFF Research Database (Denmark)

Tosello, Guido

2017-01-01

Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro......-scale dimensions and accuracies. Furthermore, these fundamentally different technology ecosystems are currently combined in order to exploit strengths of both platforms. One example is the use of lithography-based technologies to establish nanostructures that are subsequently transferred to 3D geometries via...

Framework for Sustainability Performance Assessment for Manufacturing Processes- A Review

Science.gov (United States)

Singh, K.; Sultan, I.

2017-07-01

Manufacturing industries are facing tough competition due to increasing raw material cost and depleting natural resources. There is great pressure on the industry to produce environmental friendly products using environmental friendly processes. To address these issues modern manufacturing industries are focusing on sustainable manufacturing. To develop more sustainable societies, industries need to better understand how to respond to environmental, economic and social challenges. This paper proposed some framework and tools that accelerate the transition towards a sustainable system. The developed framework will be beneficial for sustainability assessment comparing different plans alongside material properties, ultimately helping the manufacturing industries to reduce the carbon emissions and material waste, besides improving energy efficiency. It is expected that this would be highly beneficial for determination of environmental impact of a process at early design stages. Therefore, it would greatly help the manufacturing industries for selection of process plan based on sustainable indices. Overall objective of this paper would have good impact on reducing air emissions and protecting environment. We expect this work to contribute to the development of a standard reference methodology to help further sustainability in the manufacturing sector.

Control systems engineering in continuous pharmaceutical manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

Science.gov (United States)

Myerson, Allan S; Krumme, Markus; Nasr, Moheb; Thomas, Hayden; Braatz, Richard D

2015-03-01

This white paper provides a perspective of the challenges, research needs, and future directions for control systems engineering in continuous pharmaceutical processing. The main motivation for writing this paper is to facilitate the development and deployment of control systems technologies so as to ensure quality of the drug product. Although the main focus is on small-molecule pharmaceutical products, most of the same statements apply to biological drug products. An introduction to continuous manufacturing and control systems is followed by a discussion of the current status and technical needs in process monitoring and control, systems integration, and risk analysis. Some key points are that: (1) the desired objective in continuous manufacturing should be the satisfaction of all critical quality attributes (CQAs), not for all variables to operate at steady-state values; (2) the design of start-up and shutdown procedures can significantly affect the economic operation of a continuous manufacturing process; (3) the traceability of material as it moves through the manufacturing facility is an important consideration that can at least in part be addressed using residence time distributions; and (4) the control systems technologies must assure quality in the presence of disturbances, dynamics, uncertainties, nonlinearities, and constraints. Direct measurement, first-principles and empirical model-based predictions, and design space approaches are described for ensuring that CQA specifications are met. Ways are discussed for universities, regulatory bodies, and industry to facilitate working around or through barriers to the development of control systems engineering technologies for continuous drug manufacturing. Industry and regulatory bodies should work with federal agencies to create federal funding mechanisms to attract faculty to this area. Universities should hire faculty interested in developing first-principles models and control systems technologies for

Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

CERN Document Server

Mehnen, Jörn

2013-01-01

Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...