WorldWideScience

Sample records for turi vodka tests

  1. Stability of the elderberry dye in vodkas

    International Nuclear Information System (INIS)

    Pizlo, A.; Jankowska, D.

    2001-01-01

    The effect of light, pH, strength of vodkas and by-products on Sambucus nigra pigments stability was tested in this paper. The elderberry dye was unstable in vodkas during light action in general. It was stated that low strength of vodkas and high pH effected an increase of the vodkas colour stability. The presence of vitamin C caused discolouring effect on elderberry dye but chockeberry distillate effected an increase of the vodkas colour stability

  2. Direct measurement of radioactive carbon in Vietnamese vodkas by Liquid Scintillation Counter

    International Nuclear Information System (INIS)

    Hattori, Takamitsu

    2014-01-01

    From the view point of applying to laboratory exercise of radioactivity measurement by a Liquid Scintillation Counter (LSC), Vietnamese vodkas have specific features as measurement samples, for example, they are colorless, have high ethanol content, and only very few organic materials are included. Investigation was made to make sure that the Vietnamese vodkas are appropriate or not as a measurement sample for the LSC exercise. Direct measurements of 14 C without any chemical pre-treatment were made on both radioactive concentrations and specific activities of three kinds of Vietnamese vodka and also pure ethanol reagent. The LSC measurements reveal that estimated 14 C concentration is proportional to ethanol content in samples and that specific activity of 14 C shows good agreement among the Vietnamese vodkas and pure ethanol, as well as the reference value of 0.25 Bq/g of Carbon. Thus the conclusion is derived that the Vietnamese vodkas can be applied with high accuracy to the LSC exercise as measurement samples. (author)

  3. Qualitative characteristics and comparison of volatile fraction of vodkas made from different botanical materials by comprehensive two-dimensional gas chromatography and the electronic nose based on the technology of ultra-fast gas chromatography.

    Science.gov (United States)

    Wiśniewska, Paulina; Śliwińska, Magdalena; Dymerski, Tomasz; Wardencki, Waldemar; Namieśnik, Jacek

    2017-03-01

    Vodka is a spirit-based beverage made from ethyl alcohol of agricultural origin. At present, increasingly more vodka brands have labels that specify the botanical origin of the product. Until now, the techniques for distinguishing between vodkas of different botanical origin have been costly, time-consuming and insufficient for making a distinction between vodka produced from similar raw materials. Therefore, it is of utmost importance to find a fast and relatively inexpensive technique for conducting such tests. In the present study, we employed comprehensive two-dimensional gas chromatography (GC×GC) and an electronic nose based on the technology of ultra-fast GC with chemometric methods such as partial least square discriminant analysis, discriminant function analysis and soft independent modeling of class analogy. Both techniques allow a distinction between the vodkas produced from different raw materials. In the case of GC×GC, the differences between vodkas were more noticeable than in the analysis by electronic nose; however, the electronic nose allowed the significantly faster analysis of vodkas. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  4. Analisa Penggunaan Tertinggi dan Terbaik (Highest and Best Use Analysis pada Lahan Pasar Turi Lama Surabaya

    Directory of Open Access Journals (Sweden)

    Maulida Herradiyanti

    2017-01-01

    Full Text Available Pasar  Turi  merupakan  pasar  yang  telah lama  menjadi  ikon  perdagangan  tidak  hanya  di Surabaya,  namun  juga  di  Indonesia  Timur.  Kebakaran hebat yang terjadi pada Juli 2007 telah menghanguskan bangunan Pasar Turi. Aktivitas perdagangan di tempat tersebut  otomatis  terhenti.  Hingga saat ini, lahan Pasar Turi  Tahap  III  atau  yang  biasa  disebut  Pasar  Turi Lama  masih  terbengkalai.  Padahal,  lahan  seluas  16281 m2tersebut terletak di wilayah sentra perdagangan dan cocok  untuk  dikembangkan  menjadi properti komersial seperti perkantoran, pertokoan, rumah toko (ruko, danpasar tradisional. Salah  satu  cara  untuk  menentukan  penggunaan lahan Pasar Turi Lama adalah dengan metode Highest and  Best  Use  (HBU.  HBU  adalah  suatu  metode  untuk menentukan  penggunaan  aset  yang  memberikan peruntukan  paling  optimal sehingga dapat memberikan nilai  lahan  tertinggi.  Kriteria  HBU  yaitu  diijinkan secara  legal,  memungkinkan  secara  fisik,  layak  secara finansial, dan memiliki produktivitas maksimum.Hasil penelitian ini didapatkan alternatif pertokoan sebagai  alternatif  penggunaan  lahan  terbaik  dengan nilai  lahan  tertinggi  yaitu  sebesar  Rp27.994.695,78/m2dengan produktivitas maksimum sebesar  124%.

  5. Chile como destino turístico. Las publicaciones periódicas de ferrocarriles del estado: 1933- 1973

    Directory of Open Access Journals (Sweden)

    María Macarena Cortes

    2016-12-01

    Full Text Available El presente trabajo analiza los productos visuales que fortalecieron la imagen de Chile como destino turístico entre 1933 y 1973. Si bien tales productos tuvieron el objetivo de promocionar el viaje en el territorio, lo que efectivamente lograron fue fortalecer la condición de joven nación del país. A través de un análisis, preferentemente iconográfico, de las imágenes presentadas en publicaciones turísticas editadas por ferrocarriles del Estado (En viaje y Guía del veraneante, se propone aquí abordar la imagen de país turístico que construyen dichos documentos. 

  6. Peran Orang Tua dan Sumber Informasi dalam Pendidikan Seks dengan Perilaku Seksual Remaja pada Masa Pubertas di SMAN 1 Turi

    Directory of Open Access Journals (Sweden)

    Sujarwati Sujarwati

    2014-11-01

    Full Text Available Adolescent is transition period or transition from childhood to adulthood. Based on the baseline study, showed that from 268 students about 66 (60% male students said that they ever doing masturbation and 5 (1.75% students who take counseling had ever sexual intercourse and in the academic year 2012/2013 there was 1 (0.35% student was pregnant before marriage. The purpose of this research was to observe role of parents and information resources relationship in sex education with sexual behavior adolescents in puberty at SMAN 1 Turi. Study design was inductive with cross sectional. The samples were adolescents aged 16-19 years. The sampling technique was done by purposive sampling resulted on 73 respondents. The analysis used Multiple Regression and Partial Correlation Test. The results showed that 50 (68.5% students with role of parents was good, information resources 38 (52.1% students and sexual behavior of adolescent 53 (72.6% students was good. Multivariate analysis showed that there was the relationship between role of parent and information resources with sexual behavior period in puberty at SMAN 1 Turi with p=0.000 (p<0.05. In conclusion, there was relationship between role of parents and information resources in sex education with sexual behavior of adolescent in puberty at SMAN 1 Turi.

  7. Comparison of quantitative NMR and IRMS spectrometry for the authentication of "Polish Vodka".

    Science.gov (United States)

    Ciepielowski, Grzegorz; Pacholczyk-Sienicka, Barbara; Frączek, Tomasz; Klajman, Kamila; Paneth, Piotr; Albrecht, Łukasz

    2018-05-31

    The production of "Polish Vodka" is restricted by law to the ethyl alcohol of agricultural origins obtained from rye, wheat, barley, oat, triticale and potatoes grown on the territory of the Republic of Poland. The current labeling system should guarantee that the spirit is authentic and of good quality but not all producers are honest. Unfortunately, the authentic "Polish Vodka" is the most often counterfeited by the addition of cheaper and more accessible maize spirits. These illegal practices significantly reduce costs of the spirit production. Therefore, the determination of the botanical origin of alcohol in Poland is highly relevant. The quantitative 2 H NMR and isotope ratio mass spectrometry (IRMS) were used to investigate the authenticity of 30 samples of Polish spirits. Several isotopic parameters were used to determine the botanical origin of 10 unknown samples. Both approaches lead to the same conclusions regarding the percentage of maize-derived ethanol addition. Applied techniques are a valuable tool in the fight against counterfeiting of products. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  8. Preliminary study of the application of Principal Components Analysis (PCA) to the determination of the origin of brandy type vodka

    International Nuclear Information System (INIS)

    Villalobos Chaves, Alberto E.

    2006-01-01

    Principal Components Analysis (PCA) was applied to the determination of the origin of samples of vodkas. Analytical parameters used were: the alcoholic degree, the difference between the alcoholic experimental degree and declared in the etiquette, the dried extract, the relative intensities of calcium atomic emission (beak area at 422,67 nm), sodium (sum of beaks areas Ca, Na / 588,99 and 589,59 nm) and potassium (sum of beaks areas to K/766,49 nm and 769,89 nm) and finally the ultraviolet absorbency to 200 nm. The accumulation of K-averages was used. The hypothesis of item is that the sample was constituted, approximately, for two big natural groupings, this is, national vodkas and foreign vodkas. Of the application of the above mentioned procedure there was obtained that really the components of the sample were distinguishable according to the national or foreign origin in two groups, which ellipses of confidence to 95 % not achieving , even if there were eliminated the variables of alcoholic degree and difference of the alcoholic degree. (author) [es

  9. Thulium laser enucleation (ThuLEP) versus transurethral resection of the prostate in saline (TURis): A randomized prospective trial to compare intra and early postoperative outcomes.

    Science.gov (United States)

    Bozzini, G; Seveso, M; Melegari, S; de Francesco, O; Buffi, N M; Guazzoni, G; Provenzano, M; Mandressi, A; Taverna, G

    2017-06-01

    To compare clinical intra and early postoperative outcomes between thulium laser transurethral enucleation of the prostate (ThuLEP) and transurethral bipolar resection of the prostate (TURis) for treating benign prostatic hyperplasia (BPH) in a prospective randomized trial. The study randomized 208 consecutive patients with BPH to ThuLEP (n=102) or TURis (n=106). For all patients were evaluated preoperatively with regards to blood loss, catheterization time, irrigation volume, hospital stay and operative time. At 3 months after surgery they were also evaluated by International Prostate Symptom Score (IPSS), maximum flow rate (Qmax), and postvoid residual urine volume (PVR). The patients in each study arm each showed no significant difference in preoperative parameters. Compared with TURIS, ThuLEP had same operative time (53.69±31.44 vs 61.66±18.70minutes, P=.123) but resulted in less hemoglobin decrease (0.45 vs 2.83g/dL, P=.005). ThuLEP also needed less catheterization time (1.3 vs 4.8 days, P=.011), irrigation volume (29.4 vs 69.2 L, P=.002), and hospital stay (1.7 vs 5.2 days, P=.016). During the 3 months of follow-up, the procedures did not demonstrate a significant difference in Qmax, IPSS, PVR, and QOLS. ThuLEP and TURis both relieve lower urinary tract symptoms equally, with high efficacy and safety. ThuLEP was statistically superior to TURis in blood loss, catheterization time, irrigation volume, and hospital stay. However, procedures did not differ significantly in Qmax, IPSS, PVR, and QOLS through 3 months of follow-up. Copyright © 2016 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

  10. NILAI EKONOMI TOTAL KAMBING PERANAKAN ETAWAH (PE SISTEM KANDANG KELOMPOK DI DESA GIRIKERTO TURI SLEMAN (Total Economic Value Of Etawah Crossbreed Goat Of Village Group System : A Case Study in Girikerto Village in Turi Sleman

    Directory of Open Access Journals (Sweden)

    Tri Anggraeni Kusumastuti

    2008-03-01

    Full Text Available ABSTRAK Tujuan penelitian ini adalah menganalisis nilai ekonomi total yang menunjukkan besar aset sumberdaya Kambing Peranakan Etawah (PE sistem kandang kelompok di Desa Girikerto Turi Sleman. Pengambilan sampel secara sensus pada tiga kelompok ternak yaitu "Mandiri" di Dusun Nganggring, "Pangestu" di Dusun Kemirikebo, dan "Sukorejo l" di Dusun Sukorejo sebanyak 116 sampel. Untuk menghitung nilai ekonomi total dengan mengidentifikasi manfaat sosial yaitu nilai guna langsung, nilai guna tidak langsung, maupun nilai pilihan. Selain itu juga mempertimbangkan biaya sosial meliputi biaya langsung atau operasional, biaya eksternal, dan biaya relokasi. Nilai manfaat dan biaya yang dapat dipasarkan (marketahle menggunakan harga pasar, sedangkan yang tidak dipasarkan (no marketable yaitu nilai pilihan (kemauan membayar atau willingness to Pay dari masyarakat dan peternak Kambing PE, sistem kandang kelompok serta biaya relokasi (kemauan menerima tawaran alau Willingness to Accept peternak kambing sistem individu menggunakan Contingent Valuation method (CIVM. Untuk mengetahui terjadinya perubahan di luar kondisi normal dengan menggunakan analisis sensitivitas meliputi perbaikan manajemen pemeliharaan, perubahan harga output clan input, serta perubahan lingkungan. Nilai ekonomi totaI pada kondisi normal untuk periode 5 tahun mendatang dengan asumsi tidak ada perkembangan populasi tiap tahunnya dalam satuan Unit Ternak (UT sebesar 3.416.464.641 rupiah pertahun. Urutan prioritas kelayakan nilai ekonomi total Kambing Peranakan Etawah 5 tahun mendatang adalah penurunan mortalitas (4.111.611.671 rupiah pertahun, kenaikan harga jual ternak (3.814.291.873 rupiah pertahun, peningkatan produksi susu (3.756.830.268 rupiah pertahun. perbaikan kidding interval (3.536.780.715 rupiah pertahun, peningkatan harga susu segar (3.534.635.862 rupiah pertahun, penurunan harga pollard  (3.438.843.522 rupiah pertahun. peningkatan manfaat lingkungan (3.417.191.446 rupiah pertahun

  11. Synthesis of molecularly imprinted dye-silica nanocomposites with high selectivity and sensitivity: Fluorescent imprinted sensor for rapid and efficient detection of τ-fluvalinate in vodka.

    Science.gov (United States)

    Wang, Yunyun; Wang, Jixiang; Cheng, Rujia; Sun, Lin; Dai, Xiaohui; Yan, Yongsheng

    2018-04-01

    An imprinted fluorescent sensor was fabricated based on SiO 2 nanoparticles encapsulated with a molecularly imprinted polymer containing allyl fluorescein. High fluorine cypermethirin as template molecules, methyl methacrylate as functional monomer, and allyl fluorescein as optical materials synthesized a core-shell fluorescent molecular imprinted sensor, which showed a high and rapid sensitivity and selectivity for the detection of τ-fluvalinate. The sensor presented appreciable sensitivity with a limit of 13.251 nM, rapid detection that reached to equilibrium within 3 min, great linear relationship in the relevant concentration range from 0 to 150 nM, and excellent selectivity over structural analogues. In addition, the fluorescent sensor demonstrated desirable regeneration ability (eight cycling operations). The molecularly imprinted polymers ensured specificity, while the fluorescent dyes provided the stabile sensitivity. Finally, an effective application of the sensor was implemented by the detection of τ-fluvalinate in real samples from vodka. The molecularly imprinted fluorescent sensor showed a promising potential in environmental monitoring and food safety. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. 'It's like a drink you'd have before you go to a party': Analysis of a Vodka Cruiser advertising campaign.

    Science.gov (United States)

    Jones, Sandra C; Francis, Kate L; Gordon, Chloe S

    2018-01-01

    The aim of the present study was to explore young women's understandings of, and interactions with, an advertising campaign for a pre-mixed alcohol product that appeared to be promoting pre-drinking. This campaign was the subject of complaints to the Alcohol Advertising Review Board, revealing an inconsistency between the way the company responded to such complaints (arguing that the campaign does not encourage pre-drinking) and the way it described the campaign in trade press (the pre-drink enjoyed by the 'girls' while getting ready …). Twelve focus groups were conducted with 72 young women, aged 15-25 years in Melbourne, Australia. These young women's interpretations of the messages communicated in this advertising campaign were analysed thematically. The young women identified, without prompting, the main message of the campaign as being a reference to pre-drinking. Most notably, the women saw the target audience as young (including underage) women. Given that young women who drink are increasingly doing so at harmful levels, a marketing campaign, which is interpreted by the target audience to encourage pre-drinking among young (including underage) women, appears to be inconsistent with the industry's own code for alcohol advertising. We renew the call for effective regulation of alcohol advertising to better protect young Australians. [Jones SC, Francis KL, Gordon CS. 'It's like a drink you'd have before you go to a party': Analysis of a Vodka Cruiser advertising campaign. Drug Alcohol Rev 2018;37:36-41]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

  13. The Effect of Closing Hour Restrictions on Alcohol Use and Abuse in Russia

    Directory of Open Access Journals (Sweden)

    Alexander S. Skorobogatov

    2016-09-01

    Full Text Available Since 2006 onward various regions have been putting and toughening local regulations for alcohol sale hours. The effect of these policies is uncertain in a specific social and economic environment featured by poor observance of the law; long tradition of the excessive consumption of strong spirits; and significant supply of home-made or surrogate alcoholic beverages. This paper uses on the data from the RLMS for 2005-2012 to discuss the effect of the restriction of trading hours on the use of alcoholic beverages falling under the restriction, as well as the substitution effect for the beverages not under the restriction. The adult respondents were broken into the treatment group and control group assuming that the former was more sensitive to the hour restriction. The hypotheses tested are that these policies decrease the use of factory-made vodka and increase the use of home-made vodka (samogon and factory-made light beverages. Overall use, binge drinking, and the consumption of vodka, samogon, beer, and wine were examined. The paper discusses the existing estimates of the econometric specification difference-in-differences designed for testing the hypotheses. The conclusions are that the sales restrictions led to a decrease of factory-made vodka consumption and its partial substitution by samogon for people most exposed to the restriction.

  14. A cross-cultural study of cereal food quality perception

    DEFF Research Database (Denmark)

    Krutulyte, Rasa; Costa, Ana I. A.; Grunert, Klaus G.

    2009-01-01

    of several cues and dimensions in their evaluation of the perceived quality of bread, cookies, breakfast cereals, pasta and vodka. Portuguese and Lithuanians consistently gave a significantly higher average importance to all the cues and quality dimensions considered, for all products, than their Danish...... information and price were the most important for Danes. The cues and dimensions Portuguese found relevant were fairly different and more category-dependent. Cues like store type for bread, brand for breakfast cereals, pasta and vodka, country-of-origin (CoO) for vodka, and price for cookies, pasta and vodka...

  15. A cross-cultural study of cereal foods' quality perception

    DEFF Research Database (Denmark)

    Krutulyte, Rasa; Grunert, Klaus G.; Costa, Ana I. A.

    of several cues and dimensions in their evaluation of the perceived quality of bread, cookies, breakfast cereals, pasta and vodka. Portuguese and Lithuanians consistently gave a significantly higher average importance to all the cues and quality dimensions considered, for all products, than their Danish...... information and price were the most important for Danes. The cues and dimensions Portuguese found relevant were fairly different and more category-dependent. Cues like store type for bread, brand for breakfast cereals, pasta and vodka, country-of-origin for vodka, and price for cookies, pasta and vodka were...

  16. Alcoholic beverage strength discrimination by taste may have an upper threshold.

    Science.gov (United States)

    Lachenmeier, Dirk W; Kanteres, Fotis; Rehm, Jürgen

    2014-09-01

    Given the association between alcohol consumption and negative health consequences, there is a need for individuals to be aware of their consumption of ethanol, which requires knowledge of serving sizes and alcoholic strength. This study is one of the first to systematically investigate the ability to discriminate alcoholic strength by taste. Nine discrimination tests (total n = 413) according to International Standardization Organization (ISO) 4120 sensory analysis methodology "triangle test" were performed. A perceptible difference was found for vodka in orange juice (0.0 vs. 0.5% vol; 0 vs. 1% vol), pilsner and wheat beer (0.5 vs. 5% vol), and vodka in orange juice (5 vs. 10% vol, 20 vs. 30% vol, and 30 vs. 40% vol). The percentage of the population perceiving a difference between the beverages varied between 36 and 73%. Alcoholic strength (higher vs. lower) was correctly assigned in only 4 of the 7 trials at a significant level, with 30 to 66% of the trial groups assigning the correct strength. For the trials that included beverages above 40% vol (vodka unmixed, 40 vs. 50% vol and vodka in orange juice, 40 vs. 50% vol), testers could neither perceive a difference between the samples nor assign correct alcoholic strength. Discrimination of alcoholic strength by taste was possible to a limited degree in a window of intermediate alcoholic strengths, but not at higher concentrations. This result is especially relevant for drinkers of unlabeled, over-proof unrecorded alcoholic beverages who would potentially ingest more alcohol than if they were to ingest commercial alcohol. Our study provides strong evidence for the strict implementation and enforcement of labeling requirements for all alcoholic beverages to allow informed decision making by consumers. Copyright © 2014 by the Research Society on Alcoholism.

  17. Value creation for consumers through marketing communications

    OpenAIRE

    Tatulytė, Vesta

    2014-01-01

    Norėdama užsitikrinti vietą rinkoje įmonė turi įgyti konkurencinį pranašumą kitų įmonių atžvilgiu. Įmonės konkurencini pranašumą lemia jos išskirtininkai gebėjimai, kurie siejami su įmonės personalo išskirtinėmis kompetencijomis ir išskirtiniais ištekliais. Šie ištekliai yra vertingi kai jų neturi kitos įmonės. Išteklių išskirtinumas turi būti ilgalaikis, nes per trumpą laiką įmonė gali nespėti juo pasinaudoti. Norėdama išlaikyti išteklių išskirtinumą, įmonė turi nuolat investuoti į išteklių ...

  18. Alcohol consumption and its impact on the risk of high blood pressure in Russia.

    Science.gov (United States)

    Akhmedjonov, Alisher; Suvankulov, Farrukh

    2013-05-01

    This study aims to examine the causal effect of alcohol consumption on the risk of high blood pressure in Russia. Using data from the Russian Longitudinal Monitoring Survey, we estimated the influence of alcohol consumption on high blood pressure, controlling for social and other factors related to alcohol use. To address the issue of causality, we instrumented alcohol consumption by the number of frequent alcohol drinkers in the household. We found that frequent consumption of vodka and beer has an adverse impact on health. In particular, frequent vodka consumption increases the likelihood of high blood pressure by 2.88% while frequent beer consumption increases it by 2.06%. Controlling for the endogeneity of frequent alcohol consumption using the instrumental variable method produces an even larger effect for frequent vodka consumption, with a marginal effect of 7.23%. Prevention policies as well as government programs aimed at treating alcohol-related health outcomes should take into consideration the significant adverse effect of alcohol consumption on high blood pressure. It is also recommended that policy interventions aimed to address alcohol addiction issues in Russia explicitly differentiate between vodka and beer drinkers. © 2012 Australasian Professional Society on Alcohol and other Drugs.

  19. Russian Vodka - A National Tragedy

    Science.gov (United States)

    2009-03-01

    Most of these were alcoholic, with the exception of voda and syta. However, besides voda, all had a non- alcoholic version or could be easily fermented ...USSR,” 492. 175 Treml, “Death from Alcohol Poisoning in the USSR,” 493. 176 Ibid., 494. 177 Ibid.., 495. 41 tooth powder, vinegar , and shoe...consumed aircraft gun coolant, vehicle antifreeze, and vinegar concentrate. 234 Today, Russia’s military is overwhelmed by manpower and morale problems

  20. Absorption and peak blood alcohol concentration after drinking beer, wine, or spirits.

    Science.gov (United States)

    Mitchell, Mack C; Teigen, Erin L; Ramchandani, Vijay A

    2014-05-01

    Both the amount and the rate of absorption of ethanol (EtOH) from alcoholic beverages are key determinants of the peak blood alcohol concentration (BAC) and exposure of organs other than gut and liver. Previous studies suggest EtOH is absorbed more rapidly in the fasting than in the postprandial state. The concentration of EtOH and the type of beverage may determine gastric emptying/absorption of EtOH. The pharmacokinetics of EtOH were measured in 15 healthy men after consumption of 0.5 g of EtOH/kg body weight. During this 3-session crossover study, subjects consumed in separate sessions, beer (5.1% v/v), white wine (12.5% v/v), or vodka/tonic (20% v/v) over 20 minutes following an overnight fast. BAC was measured by gas chromatography at multiple points after consumption. Peak BAC (Cmax ) was significantly higher (p wine (61.7 ± 10.8 mg/dl) or beer (50.3 ± 9.8 mg/dl) and was significantly higher (p wine than beer. The time to Cmax occurred significantly earlier (p wine (54 ± 14 minutes) or beer (62 ± 23 minutes). Six subjects exceeded a Cmax of 80 mg/dl after vodka/tonic, but none exceeded this limit after beer or wine. The area under the concentration-time curve (AUC) was significantly greater after drinking vodka/tonic (p wine or beer. Comparison of AUCs indicated the relative bioavailability of EtOH was lower after drinking beer. Findings indicate that BAC is higher after drinking vodka/tonic than beer or wine after fasting. A binge pattern is significantly more likely to result in BAC above 80 mg/dl after drinking vodka/tonic than beer or wine. Men drinking on an empty stomach should know BAC will vary depending on beverage type and the rate and amount of EtOH. © 2014 The Authors. Alcoholism: Clinical and Experimental Research published by Wiley Periodicals, Inc. on behalf of Research Society on Alcoholism.

  1. Interrogation of minors' witnesses and victims

    OpenAIRE

    Veikutytė, Rasa

    2011-01-01

    Lietuvoje, kaip ir kitose demokratinėse šalyse, valstybės politika, taip pat ir baudžiamoji, formuojama laikantis žmogaus teisių ir laisvių apsaugos bei gynybos principų. Nepilnamečiai dėl savo ypatingos padėties, t.y. fizinio ir psichologinio nebrandumo, turi teisę būti ypač globojami ir remiami, užtikrinant atitinkamą jų teisinę apsaugą. Reiškia, kad asmuo, nesulaukęs aštuoniolikos metų amžiaus, visuomet turi būti tarp tų, kam pirmiausiai suteikiama apsauga ir parama. Todėl, atsižvelgiant į...

  2. Anthropological Aspects of Alcohol Trade in Microsocieties of Chukotka National Settlements

    Directory of Open Access Journals (Sweden)

    Anastasiya Yarzutkina

    2016-12-01

    Full Text Available The aim of the report is to describe the communicative culture that has been established between the home-made vodka traders (home-distilled vodka producers, alcohol buyers and activists fighting for temperance in national settlements of Chukotka. Informal economic relations take place within particular settlements; the main thing that is involved in these relations is alcohol. Outside the settlement the connections between traders and buyers do not work and the network of interactions breaks. To mark out the participants in the alcohol trade the report presents the structure of settlement microsociety in Chukotka from a very generalised perspective, based on author's experience of staying in these settlements and on some statistical data.

  3. Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

    OpenAIRE

    Jokom, Regina; Kristanti, Monika

    2014-01-01

    The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

  4. PEACE BUILDING BASED ON THE LOCAL WISDOM (The study of Phenomenology-Ethnography in the Society of Islamic Relegion, Cristian, Hinduism at Balun Village, Turi Subdistric Lamongan District

    Directory of Open Access Journals (Sweden)

    Ahmad Zakki Fuad

    2016-05-01

    Full Text Available The differences between of religion and belief in a particular community is usually will show a conflict between followers of religions. It has become a fact of history that can not be ignored. whereas, if it is returned on the purpose of religion itself, of course, conflict, hostility, war is something contradictory. All of  true religion have aimed to creat the objectives of the human being. Such as, through the realization of harmony in social life. Religion suggests the importance of building a good attitude in the society besides spiritual rites. It was a union of  two aspects  relations between vertical and horizontal. Rural Prototype communities in the region which have three religions and places of worship side by side in Balun Village Turi subdistric Lamongan district. Balun one of the village have multicultur and plural in the society over the years never happened conflicts religious. Because of it, the researcher suppose to searh how is the social construction of the religious, in the harmony and how  is the process of establishing the values of harmony, religious rites and cultural activities that involve people of the different religions.            Phenomenological etnography  approach in this research through the data sources that are grouping refers to the  stratification. Social startifikasi in used in this research according to Pitrim A.Sorokin and Max Weber theories were the  strata of society devided into some group based on the standard such as; respectable, power and authority,  knowledge and income . then From this theory the  researcher devided the society  into four group. The first are the figures of Islamic religious, Christian, Hindu. Second the committee of mosgue, Church and Temple Board, third  local goverment staff, educators, teachers in all religius. The fourth  regular community; farmers , factory workers. Based on analyzed of phenomenological ethnography, the researchers found the result

  5. Determinan Permintaan Pariwisata di ASEAN (Analisis Data Panel Dinamis 2000-2015 [Tourism Demand Determinants in ASEAN (Dynamic Panel Data Analysis 2000-2015

    Directory of Open Access Journals (Sweden)

    Christina Ruth Elisabeth

    2018-05-01

    Full Text Available The purpose of this study is to examine the determinants of tourism demands in ASEAN during the period of 2000-2015. This study uses Generalized Method of Moments (GMM to measure the impact of tourism price, infrastructure, health, openness, government spending on education, risk of tourism and word of mouth effect to the number of tourist arrivals in ASEAN. The result shows that the significant determinants are physical investment, health, openness, risk of tourism and word of mouth effect. Meanwhile, tourism price and government expenditure on education do not significantly affect the number of tourist arrivals. This study recommends the need for ASEAN member countries to enhance cooperation in developing infrastructure, training on safety and health, trade negotiations and tourism promotion. Bahasa Indonesia Abstrak: Tujuan penelitian ini adalah untuk mengetahui deteminan dari permintaan turis masuk di ASEAN, sepanjang periode 2000-2015. Studi ini menggunakan model Generalized Method of Moments (GMM untuk mengukur dampak dari harga pariwisata, infrastruktur, tingkat kesehatan, keterbukaan, pengeluaran pemerintah untuk pendidikan, resiko pariwisata dan efek word of mouth terhadap jumlah turis masuk ke ASEAN. Hasil penelitian menunjukkan bahwa faktor yang signifikan mempengaruhi adalah investasi infrastruktur, tingkat kesehatan, keterbukaan, resiko pariwisata dan efek word of mouth. Sementara, harga pariwisata dan pengeluaran pemerintah untuk pendidikan tidak signifikan mempengaruhi jumlah turis masuk. Studi ini merekomendasikan pentingnya negara ASEAN untuk meningkatkan kerjasama dalam pengembangan infrastruktur, training keamanan dan kesehatan, meningkatkan negosiasi perdagangan dan promosi pariwisata.

  6. Uudised

    Index Scriptorium Estoniae

    2008-01-01

    Laulja Mati Turi kontserdist 19. apr. Kadrioru lossis. Vene viiuldaja Tatjana Grindenko ja ansambli Opus Post kontserdist 19. apr. Tallinnas dominiiklaste kloostri Katariina kirikus. USA bändi Creedence Clearwater Revival laulja John Fogerty kontserdist 26. mail Helsingi Hartwall Arenal

  7. Wilhelm Ostwald, the Father of Physical Chemistry

    Indian Academy of Sciences (India)

    research in chemical synthesis and by the end of the cen- tury scientists could ... The following concept is applied in the study of chemical affinities by observing .... A few early examples of catalysis were the trans- formation of starch into dextrin ...

  8. The making of S{u00E1mi ethnography : contested authorities and negotiated representations / Kristin Kuutma

    Index Scriptorium Estoniae

    Kuutma, Kristin, 1959-

    2008-01-01

    Vaadeldakse saami autori Johan Turi raamatut Muitalus s{u00E1miid birra (1910) ja selle tõlget taani keelede Emilie Demant Hatti poolt ning uuritakse, millist autoritaarsust ja kultuurilist poeetikat see peegeldab ja millist sotsiaalset ja kultuurilist kriitikat ta edasi arendab

  9. Adding Recursive Constructs to Bialgebraic Semantics

    DEFF Research Database (Denmark)

    Klin, Bartek

    2004-01-01

    This paper aims at fitting a general class of recursive equations into the framework of ‘well-behaved' structural operational semantics, formalized as bialgebraic semantics by Turi and Plotkin. Rather than interpreting recursive constructs by means of operational rules, separate recursive equatio...

  10. Mud cloth from Mali: its making and use

    African Journals Online (AJOL)

    Owner

    book covers and wrapping paper. ... used in mud cloth can be traced back to the 12th cen- tury AD ... cluded a bogolan wrap in his winter collection (Adire .... Stencils made from cardboard or plastic are also used. These stencilled cloths can be ...

  11. Äkki polnud see Noole viimane kümnevõistlus? / Tarmo Paju

    Index Scriptorium Estoniae

    Paju, Tarmo

    2004-01-01

    Erki Nool jäi kümnevõistluses 8. kohale, andes samas mõista, et tema kümnevõistleja karjäär ei pruugi veel lõppenud olla. Indrek Turi lõpetas 23. kohaga. Eesti fännid andsid Noolele kõrge hinde

  12. NJP Vol 39 no 3

    African Journals Online (AJOL)

    Prof Ezechukwu

    2012-01-12

    Jan 12, 2012 ... ... programmes. Keywords: Mothers. Knowledge. Perception. Practice. Immunization. ... tury in terms of number of deaths averted per year.1 In ... vaccine dosages to infants at specified ages. ... ing to over 200,000 deaths per year.10 However, in ... responses and results presented as tables and charts.

  13. An Abstract Coalgebraic Approach to Process Equivalence for Well- Behaved Operational Semantics

    DEFF Research Database (Denmark)

    Klin, Bartek

    This thesis is part of the programme aimed at finding a mathematical theory of well-behaved structural operational semantics. General and basic results shown in 1997 in a seminal paper by Turi and Plotkin are extended in two directions, aiming at greater expressivity of the framework. The so-call...

  14. Kontsert

    Index Scriptorium Estoniae

    2007-01-01

    II rahvusvahelisest noortekooride festivalist 1.-3. veebr. TÜ aulas. Gustav Mahleri "Poisi võlusarv" esitusest 1. veebr. TÜ Ajaloo Muuseumis (esitajad Annaliisa Pillak, Taavi Tampuu ja Kadri-Ann Sumera). Cyprien Katsarise kontserdist 30. jaan. Vanemuise kontserdimajas. Kontserdil "Vocalissimo 2007. Vajatakse Muusat!" 28. jaan. Tartu Linnamuuseumis (esinejad Mati Turi ja Martti Raide)

  15. THE ROLE OF' POULTRY IN FOOD PRODUCTION r63

    African Journals Online (AJOL)

    the anticipated 6 billion humans by the turn of the cen- tury cornpared to the ... Many areas also have poor ciisease ... up all the grain supplies that can be produced by 1985, if it is forced ... tein and 9o6 of the total energy intake of the world hu-.

  16. Dokumentation 2009 / 2010

    Index Scriptorium Estoniae

    2009-01-01

    Saksamaa ja Austria ooperiteatrites töötavad muusikud: Bremer Theater'is dirigent Tarmo Vaask, Flensburg Musiktheater der Schleswig-Holsteinishen Landestheater'is dirigent Mihkel Kütson ja laulja Mati Turi, Hamburgische Staatsoper'is laulja Lauri Vasar, Theater Magdeburg'is dirigent Anu Tali, Wiener Staatsoperis laulja Ain Anger, Volksoper Wien'is laulja Annely Peebo

  17. Pärimuskultuurist kultuurisümboliks : saami etnograafia ja seto eepose saamislugu / Kristin Kuutma

    Index Scriptorium Estoniae

    Kuutma, Kristin, 1959-

    2005-01-01

    Ülevaade saami asualast, elukeskkonnast, elatusviisidest ja muutustest kultuuriprotsessis. Johan Turi kui esimese saamikeelse ilukirjandusliku autori ja Emilie Demant Hatti koostöös valminud teosest "Muitalus sámiid birra" (Jutustus saamidest). Setode ajaloost ja taustast eepose-projekti kujunemisele, pärimuse kogumine. Rahvalauliku Anne Vabarna poolt esitatud setu rahvuseeposest "Pekolanõ" (Peko)

  18. Fulltext PDF

    Indian Academy of Sciences (India)

    much pride in and admiration for the 'im- mortal' work of Ampere, and of Fresnel and. Carnot; and at the same time quite strong criticism of Maxwell's style in expressing his ideas and theories. The meaning of mecha- nical explanation of physical phenomena - the ideal in 19th cen tury physics - is especially clearly outlined.

  19. Mining the Twentieth Century's History from the Time Magazine Corpus

    NARCIS (Netherlands)

    Kestemont, Mike; Karsdorp, F.B.; Düring, Marten

    2014-01-01

    In this paper we report on an explorative study of the history of the twentieth cen- tury from a lexical point of view. As data, we use a diachronic collection of 270,000+ English-language articles har- vested from the electronic archive of the well-known Time Magazine (1923–2006). We attempt to

  20. 108aastase Liviko tooted koguvad tunnustust nii kodus kui välismaal / Tiit Reinart

    Index Scriptorium Estoniae

    Reinart, Tiit, 1964-

    2006-01-01

    Tänavu tunnustati AS-i Liviko tooteid Vana Tallinna Liköör, Üx Vodka ja Vana Tallinn Cream ühel mainekamal rahvusvahelisel konkursil International Wine & Spirit Competition (IWSC), ühtlasi tegeleb ettevõte jätkuvalt tootearenduse ja kvaliteetveinide importimisega. Vt. samas: Maksumärgita alkohol on illegaalne

  1. Take this Quick Quiz: Alcohol and Medications | NIH MedlinePlus the Magazine

    Science.gov (United States)

    ... 12 ounces of regular beer 5 ounces of wine 1.5 ounces of 80-proof distilled spirits none of the above all of the above ... can or bottle of regular beer, ale, or wine cooler; one 8- or 9-ounce can or bottle ... distilled spirits such as whiskey, gin, vodka, or rum. False. ...

  2. Alchohol Consumption Practices in the Koryak Community

    Directory of Open Access Journals (Sweden)

    Lyudmila N. Khakhovskaya

    2016-12-01

    Full Text Available The article is dedicated to the analysis of alcohol consumption practices within the Koryak ethno-cultural community. The aim of the article is to understand how the reasons for alcohol consumption are explained within the framework of the community. The analysis is based on the ideas of Durkheim’s social theory. The author of the article claims that the practice of consuming alcohol is essentially connected with the more archaic practice of mushroom consumption since both have a grounding in the Koryak perception of the world. The analysed models of behaviour stem from appropriate Koryak epistemology and ontology, which themselves are based on the notion of the ‘other world’ and communication with supernatural entities (spirits. The isomorphism of consuming alcohol and amanita intoxication reflects the inner core of this connection: the Koryak believe that an entity enters the human body and controls their actions. The transition from one type of intoxication to another is accompanied by drastic transformation of the materiality of the consumed product, which, in turn, leads towards social transformations. Such social changes are qualified as anomie by the author of the article. The visual materiality of the amanita mushroom dictated its symbolic anthropomorphism and creation of special rules for the treatment (amanita codex. The physical amorphousness of vodka does not imply the same intellectual work. The author claims that this factor was one of the reasons why the Koryak do not have social regulations about vodka consumption – which leads to mass alcoholism. It is possible that indigenous communities have difficulties in working out the required social regulations because of the complexities surrounding the non-utilitarian treatment of the unusual materiality of vodka.

  3. Support for Quitting: Choose Your Approach

    Science.gov (United States)

    ... ounces of regular beer, 5 ounces of table wine, or 1.5 ounces of 80-proof distilled spirits. Distilled spirits include vodka, whiskey, gin, rum, and ... is 5% alcohol by volume (alc/vol), table wine is about 12% alc/vol, and straight 80-proof distilled spirits is 40% alc/vol. The percent alcohol by ...

  4. Calculators

    Science.gov (United States)

    ... ounces of regular beer, 5 ounces of table wine, or 1.5 ounces of 80-proof distilled spirits. Distilled spirits include vodka, whiskey, gin, rum, and ... is 5% alcohol by volume (alc/vol), table wine is about 12% alc/vol, and straight 80-proof distilled spirits is 40% alc/vol. The percent alcohol by ...

  5. THE IMPLEMENTATION OF HINDU PHILOSOPHY “TRI KAYA PARISUDHA” FOR SUSTAINABLE TOURISM IN MUNDUK VILLAGE, NORTH BALI

    Directory of Open Access Journals (Sweden)

    Putu Devi Rosalina

    2017-02-01

    Full Text Available Pesatnya pertumbuhan pariwisata menimbulkan kecenderungan untuk menjaga kontak antara penduduk lokal dan wisatawan. Keharmonisan hubungan kedua pihak ini tentunya menjadi pilar utama dalam perkembangan pariwisata berkelanjutan. Oleh karena itu, membangun pemahaman dua-arah dapat dibina salah satunya melalui penerapan kearifan lokal. Maka, penelitian ini mendiskusikan tentang bagaimana revitalisasi Tri Kaya Parisudha dapat berujung kepada perkembangan pariwisata berkelanjutan di Munduk. Konsep Tri Kaya Parisudha yang meliputi ‘pikiran’ (Manacika, ‘perkataan’ (Wacika dan ‘perbuatan’ (Kayika, dipercaya dapat menghasilkan energi intelektual, emosional, spiritual dan energi kreatif. Penelitian ini menggunakan pendekatan kuantitatif-kualitatif secara deskriptif. Kuesioner disebarkan melalui accidental sampling dengan pendekatan 4 skala likert, yang kemudian dianalisis secara kualitatif melalui wawancara mendalam dengan informan melalui purposive sampling. Hasil penelitian menunjukkan bahwa Tri Kaya Parisudha sudah dipahami dan diimplementasikan oleh penduduk Munduk, seiring dengan keterbukaan mereka untuk menyambut turis karena dianggap memberikan dampak positif terhadap pendapatan. Sebagian besar turis, yakni 74% menyatakan sangat puas akan kunjungan mereka. Implementasi TKP kemudian harus lebih ditingkatkan lagi melalui pengetahuan, bahasa dan sikap, yang kemudian bermuara pada peningkatan loyalitas dan pembentukan citra baik bagi suatu destinasi, sehingga pada akhirnya Munduk dapat terus berpegangan pada pariwisata berkelanjutan.

  6. The origins of the birth control movement in England in the early nineteenth century.

    Science.gov (United States)

    Langer, W L

    1975-01-01

    The origins of the birth control movement in England in the 19th cen tury are discussed. The impact of Malthus's "Essay on the Principle of Population" and the activities of such thinkers and reformers as Jermy Bentham, James and John Stuart Mill, Francis Plance, Richard Carlile, Robert Dale Owen, and Charles Knowlton are discussed. The social debate that arose during the century is discussed.

  7. Selección de progenitores en espárrago Parent selection in asparagus

    Directory of Open Access Journals (Sweden)

    I. Gatti

    2003-06-01

    Full Text Available O objetivo principal deste trabalho foi determinar as variáveis que melhor explicam a variação entre indivíduos dentro da população de aspargos originária da cultivar Argenteüil e selecionar plantas superiores para compor novas populações. O ensaio, composto por 1280 plantas, foi instalado no campo experimental da Facultad de Ciencias Agrarias de la Universidad Nacional de Rosario, Santa Fe, Argentina, em 1996. Durante os anos de 1997 e 1998, foram avaliadas as variáveis: número de turiões por planta (TU; peso médio do turião (PM; diâmetro do turião (DI; produção total por planta (RE; produção comercial por planta (RM; número de dias para início da colheita (DAC; número de hastes por planta (NUTA; altura da haste principal (ALT e peso fresco da massa verde (MASAV. De acordo com a análise de componentes principais, as variáveis RE, RM, PM, DI e TU, são responsáveis por 60% da variação existente dentro da população avaliada. A análise de agrupamento baseada nestas variáveis, permitiu a identificação de cinco grupos distintos para os dois sexos. Os grupos G5 de plantas estaminadas e G5 de plantas pistiladas (7,51% da população total apresentaram as melhores características de RE e qualidade. Destes grupos, foram selecionadas 6 plantas estaminadas e 8 plantas pistiladas para serem utilizadas como genitores no programa de melhoramento de aspargos.The principal aim of this experiment was to ascertain what the variables are which best explain the variations among individuals within the populations of asparagus which originates from the cultivar Argenteüil and as a result select better plants to form new populations. The test, using 1,280 plants, was carried out at he experimental farm in the Facultad Ciencias Agrarias de la Universidad Nacional de Rosario, Santa Fé, Argentina, in 1996. During 1997 and 1998 the number of spears per plant (TU, the mean weight of spears (PM, mean diameter of spears (DI total yield

  8. Vodka and violence: alcohol consumption and homicide rates in Russia.

    Science.gov (United States)

    Pridemore, William Alex

    2002-12-01

    In Russia, rates of alcohol consumption and homicide are among the highest in the world, and already-high levels increased dramatically after the breakup of the Soviet Union. Rates of both, however, vary greatly among Russia's 89 regions. We took advantage of newly available vital statistics and socioeconomic data to examine the regional covariation of drinking and lethal violence. Log-log models were employed to estimate the impact of alcohol consumption on regional homicide rates, controlling for structural factors thought to influence the spatial distribution of homicide rates. Results revealed a positive and significant relationship between alcohol consumption and homicide, with a 1% increase in regional consumption of alcohol associated with an approximately 0.25% increase in homicide rates. In Russia, higher regional rates of alcohol consumption are associated with higher rates of homicide.

  9. Renewable fuels - a growing future?

    International Nuclear Information System (INIS)

    Blackledge, C.

    1997-01-01

    The production of ethanol fuels, industrial alcohol, vodka, and gasoline additives from barley and corn by Commercial Alcohols and Alberta Bioclean is reported. The reformulated gasoline market, the reduced emission with ethanol fuels, plans for a new alcohol plant, sale of byproduct high protein animal feed and carbon dioxide, and the encouragement offered by the Canadian government are discussed. (UK)

  10. Türi viin : aasta jagu pohmellita võidujoovastust / Cathryne Davis ; interv. Neeme Raud

    Index Scriptorium Estoniae

    Davis, Cathryne

    2003-01-01

    Ameerika Ühendriikides müüdavatest Eesti viinadest on kõige suurema edu saavutanud Türi vodka. New-Yorgi suhtekorraldusfirma Deussen Global Comunications'i esindaja Cathryne Davis näeb müügiedu põhjustena viina kõrget kvaliteeti, turundusalast koostööd rahvusvaheliselt tuntud Bacardi'ga, eliidile suunatud sponsorlust, ulatuslikku müügivõrku ja edukat reklaamikampaaniat

  11. Identification of Counterfeit Alcoholic Beverages Using Cluster Analysis in Principal-Component Space

    Science.gov (United States)

    Khodasevich, M. A.; Sinitsyn, G. V.; Gres'ko, M. A.; Dolya, V. M.; Rogovaya, M. V.; Kazberuk, A. V.

    2017-07-01

    A study of 153 brands of commercial vodka products showed that counterfeit samples could be identified by introducing a unified additive at the minimum concentration acceptable for instrumental detection and multivariate analysis of UV-Vis transmission spectra. Counterfeit products were detected with 100% probability by using hierarchical cluster analysis or the C-means method in two-dimensional principal-component space.

  12. The Data Base for the May 1979 Marine Surface Layer Micrometeorological Experiment at San Nicolas Island, California.

    Science.gov (United States)

    1982-05-07

    solar short wave + sensl/t. + latent) TUR microthermal TURbulence temperature structure parameter ((2) V( ) average raw data Voltage for analog channe...meter height from profile C,2 measurements. TTABLE meter Tide table referenced to mean sea level. TURI OK/m - 2/ 3 Microthermal turbulence temperature...structure parameter (C,2 ) at the ZTURI height. TUR2 *K/m - 2/ 3 Microthermal turbulence temperature structure parameter (C,2) at the ZTUR2 height

  13. Perancangan Visual Branding Pendukung Promosi Wisata “Rumah Sleman Private Boutique Hotel” YOGYAKARTA

    OpenAIRE

    Wijaya, Sarah Zerlinda; Dektisa H., Andrian; Arini Maer, Bernadette Dian

    2014-01-01

    Rumah Sleman adalah milik Sultan Pakubuwana X , sejak tahun 1814 di Kampung Sewu, Solo. Karena beberapa alasan, keseluruhan bangunan Joglo dipindahkan ke desa Warak, Sleman dan beralih fungsi menjadi private boutique hotel. Permasalahan yang diangkat terletak pada kurangnya kegiatan promosi yang telah dilakukan sehingga masyarakat kurang mengenal Rumah Sleman Private Boutique Hotel. Untuk menarik minat para turis mancanegara maupun lokal terhadap Rumah Sleman Private Boutique Hotel, maka dipe...

  14. Absolut x Adbusters: vínculos sociais da publicidade revelados pela antipublicidade

    Directory of Open Access Journals (Sweden)

    Simone Rocha

    2008-10-01

    Full Text Available O objetivo deste artigo é evidenciar alguns vínculos que a publicidade estabelece com o mundo social por meio do olhar tensionador da antipublicidade. Tomando por base autores como Stuart Hall e Michel Foucault, e através de uma análise sociossemiótica de anúncios da Absolut Vodka e dos spoof ads da ONG canadense Adbusters, procuramos evidenciar alguns dos modos pelos quais a masculinidade é uma representação socialmente compartilhada, tornando-se um elemento relevante a ser considerado na construção de campanhas publicitárias. Palavras-chave: Antipublicidade; publicidade; representações sociais. ABSTRACT The aim of this paper is to evidence the links which advertisements build with the social world from the questioning point of view of spoof ads. Based on authors such as Stuart Hall and Michel Foucault, and through a socio- semiotic analysis of Absolut Vodka ads and the spoof ads produced by Canadian NGO Adbusters, we try to highlight some of the ways in which masculinity is a socially shared representation, thus an important factor to be considered in the construction of advertising campaigns. Keywords: Spoof ads; advertisement; social representations.

  15. Seasonality of alcohol-related phenomena in Estonia

    Science.gov (United States)

    Silm, Siiri; Ahas, Rein

    2005-03-01

    We studied alcohol consumption and its consequences as a seasonal phenomenon in Estonia and analysed the social and environmental factors that may cause its seasonal rhythm. There are two important questions when researching the seasonality of human activities: (1) whether it is caused by natural or social factors, and (2) whether the impact of the factors is direct or indirect. Often the seasonality of social phenomena is caused by social factors, but the triggering mechanisms are related to environmental factors like temperature, precipitation, and radiation via the circannual calendar. The indicators of alcohol consumption in the current paper are grouped as: (1) pre-consumption phenomena, i.e. production, tax and excise, sales (beer, wine and vodka are analysed separately), and (2) post-consumption phenomena, i.e. alcohol-related crime and traffic accidents and the number of people detained in lockups and admitted to alcohol treatment clinics. In addition, seasonal variability in the amount of alcohol advertising has been studied, and a survey has been carried out among 87 students of Tartu University. The analysis shows that different phenomena related to alcohol have a clear seasonal rhythm in Estonia. The peak period of phenomena related to beer is in the summer, from June to August and the low point is during the first months of the year. Beer consumption correlates well with air temperature. The consumption of vodka increases sharply at the end of the year and in June; the production of vodka does not have a significant correlation with negative temperatures. The consumption of wine increases during summer and in December. The consequences of alcohol consumption, expressed as the rate of traffic accidents or the frequency of medical treatment, also show seasonal variability. Seasonal variability of alcohol consumption in Estonia is influenced by natural factors (temperature, humidity, etc.) and by social factors (celebrations, vacations, etc.). However

  16. Application of perennial legume green manures to improve growth and yield of organic lowland rice

    Directory of Open Access Journals (Sweden)

    M Winarni

    2016-10-01

    Full Text Available A pot experiment in green house was done to study the effect of the dosage and speciesof perennial legume green manures to the physiological traits, growth and yield of organic lowland rice (Oryza sativaL., and to obtain the optimal dosage as well.  The research was arranged in a factorial randomized block design consistedof two factors with three replications.The first factor was the species of perennial legume thatconsisted of threespecies: Turi (Sesbaniagrandiflora, Glirisidia (Gliricidiasepium, and Lamtoro (Leucaenaleucocephala and cow manure as control treatment. The second factor was the dosage of green manure thatconsisted of four levels: 5, 10, 20 and 40 t/ha.  The results showed that application ofperennial legumesinto the soil significantly improved the growth and yield of rice.  The application of  20 t Glirisidia leaves/haproduced the highest grain yield, followed by 20 t Lamtoro leaves/ha and 20 t Turi leaves/ha.  The optimal dosages of S. grandiflora, G. sepium and L. leucochepala leaves that could yield 58.03 g/hill (equivalent to14.51 t/ha, 53.67 g/hill (equivalent to 13.42 t/ha, and 49.67 g/hill (equivalent to 12.42 t/ha were 28.05, 25.46 and 26.41 t/ha, respectively.

  17. FORMELE DE TURISM CARE VALORIFICĂ COMPONENTELE ATRACTIVE ALE DESTINAŢIEI

    Directory of Open Access Journals (Sweden)

    Ina CAVCALIUC

    2015-12-01

    Full Text Available Atractivitatea unei destinaţii depinde de resursele turistice existente şi de modul în care acestea sunt percepute de turişti. Componentele ofertei turistice nu au aceeaşi importanţă în cadrul ierarhiei stabilite de consumatori în vederea satisfacerii motivaţiilor turistice, deoarece permanent există posibilitatea de a le completa, substitui sau compensa unele cu altele, de a modifica ponderea importanţei fiecăruia în cadrul consumului turistic. Componentele de atractivitate a teritoriului stimulează interesul potenţialilor turişti, pentru a le vizita, satisfăcând diferite motivaţii turistice. FORMS OF TOURISM THAT IMPROVE ATTRACTIVE COMPONENTS OF THE DESTINATIONThe attractiveness of a destination depends on the existing tourism resources and how they are perceived by tourists. Tourism supply components have not the same importance in the hierarchy established by consumer in order to satisfy its travel motivations, because there is the possibility of complete, substitute or offset each other, to modify the importance of each in the share of tourism consumption. Attractive components of the territory stimulate interest of potential tourists to visit them, satisfying different travel motivations. 

  18. Colorimetric Recognition of Aldehydes and Ketones.

    Science.gov (United States)

    Li, Zheng; Fang, Ming; LaGasse, Maria K; Askim, Jon R; Suslick, Kenneth S

    2017-08-07

    A colorimetric sensor array has been designed for the identification of and discrimination among aldehydes and ketones in vapor phase. Due to rapid chemical reactions between the solid-state sensor elements and gaseous analytes, distinct color difference patterns were produced and digitally imaged for chemometric analysis. The sensor array was developed from classical spot tests using aniline and phenylhydrazine dyes that enable molecular recognition of a wide variety of aliphatic or aromatic aldehydes and ketones, as demonstrated by hierarchical cluster, principal component, and support vector machine analyses. The aldehyde/ketone-specific sensors were further employed for differentiation among and identification of ten liquor samples (whiskies, brandy, vodka) and ethanol controls, showing its potential applications in the beverage industry. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Persistence, switch rates, drug consumption and costs of biological treatment of rheumatoid arthritis: an observational study in Italy

    OpenAIRE

    Degli Esposti, Luca; Favalli, Ennio Giulio; Sangiorgi, Diego; Di Turi, Roberta; Farina, Giuseppina; Gambera, Marco; Ravasio, Roberto

    2016-01-01

    Luca Degli Esposti,1 Ennio Giulio Favalli,2 Diego Sangiorgi,1 Roberta Di Turi,3 Giuseppina Farina,4 Marco Gambera,5 Roberto Ravasio,6 1CliCon S.r.l. – Health, Economics & Outcomes Research, Ravenna, 2Department of Rheumatology, Istituto Ortopedico Gaetano Pini, Milan, 3Local Pharmaceutical and Supplementary Assistance Unit, Roma Local Health Authority D, Rome, 4Internal Management Control Unit – Pharmaceutical Spending Control Sector, Caserta Local Health ...

  20. Impacto de técnicas innovadoras aplicadas a la cadena agroalimentaria espárrago (Asparagus officinalis L. para optimizar el posicionamiento en diferentes mercados

    Directory of Open Access Journals (Sweden)

    Alicia Zubiría

    2010-01-01

    Full Text Available El espárrago (Asparagus officinalis L. es un producto delicado cuyo destino son segmentos de mercados muy exigentes en la presentación y cada vez más proclives a la adquisición de productos IV Gama, presentados en bandeja y listos para consumir. Actualmente, existen técnicas innovadoras de manejo productivo (empleo de plantines y manejo poscosecha (empleo de bandejas. Con el objetivo de estudiar el impacto sobre el rendimiento de densidades (D1: 35.714; D2: 23.810 y D3: 17.857 pl/ha, tamaños de plantines PG:celda grande (70 cm E3, PM:celda mediana (50 cm E3 y PP:celda pequeña (20 cm E3 y la pérdida de peso fresco durante la poscosecha de turiones de distintos calibres (Large L, Medium M y Small S acondicionados en bandejas con (CF y sin film (SF, se realizó un ensayo, en la Facultad de Agronomía, UNCPBA, en donde se evaluaron las variables: productividad neta comercial (PNCH (kg/ha; por cosecha (PNCC (kg/cosecha; Nº de turiones (NT y peso promedio por turión (PPT. PNCH fue 1º año: 8012,6 kg/ha; 2º año: 4468,86 kg/ha (p < 0,05, mientras que PG:5.757, PM:6.213 y PP:6.688 kg/ha. El PPT de PG:10,46; PM:9,86 y PP:10,77 g/turión. D1 produjo 1069,14 kg/ha más y la mayor cantidad de turiones/ha (648,033. El peso fresco de los turiones acondicionados CF resultó estadísticamente superior (p < 0,05, obteniéndose en promedio 13,0 y para SF 10,45 g/turión. Respecto de los calibres los mayores perdieron menos peso (CF-L:5; CF-M:5; CF-S:9,1 %; SF-L:26; SF-M:35; SF-S: 36,36 %. Solo se conservaron características organolépticas en CF; L:50, M:28,57 y S:14,28 %. Por lo expuesto convendría utilizar D1 y el empleo de bandejas para su acondicionamiento.

  1. Early Sámi visual artists - Western fine art meets Sámi culture

    Directory of Open Access Journals (Sweden)

    Tuija Hautala-Hirvioja

    2014-04-01

    Full Text Available Johan Turi (1854–1936, Nils Nilsson Skum (1872–1951 and John Savio (1902–1938 were among the first Sámi visual artists. The production of their art work occurred between the 1910s and the early 1950s. Sámi aesthetics had its basis in folklore, i.e., handicraft or duodji, which did not follow the principle of art for art’s sake but combined beauty and practicality. Art was part of community life. Not until the 1970s was the word daidda, which is Finnish in origin and which means “art”, adopted into the Sámi language. Turi and Skum became famous through their books. They drew and wrote in order to pass the traditional knowledge of their people on to succeeding generations. They also wanted to introduce Sámi life and culture to non-Sámi people. One typical feature of their work is that they depicted Sáminess in a realistic way and sought to strengthen and preserve the Sámi identity through their art. In Turi and Skum’s work, both the documentation of community life and their own personal expression were strongly present and equally important; for this reason their pictures and texts have both practical and aesthetic dimensions. They did not attend school and were self-taught artists. The third pioneer of Sámi visual arts was John Savio, who, unlike the other two, attended secondary school and studied visual arts both independently and under the guidance of a mentor. He expressively combined Western ways of depiction with Sámi subjects. My article examines what made these early Sámi artists change over from Sámi handicraft, duodji, to Western visual arts, how they used Western pictorial conventions in dealing with their Sámi subjects, and the significance of their art for Sámi identity and culture. They lived and worked under cross pressure: the first few decades of the 20th century were characterized by racial theories that denigrated Sámi people, and the period following World War II was marked by demands for

  2. Impacto de técnicas innovadoras aplicadas a la cadena agroalimentaria espárrago (Asparagus officinalis L. para optimizar el posicionamiento en diferentes mercados

    Directory of Open Access Journals (Sweden)

    Andrea P. Guisolis

    2010-12-01

    Full Text Available El espárrago (Asparagus officinalis L. es un producto delicado cuyo destino son segmentos de mercados muy exigentes en la presentación y cada vez más proclives a la adquisición de productos IV Gama, presentados en bandeja y listos para consumir. Actualmente, existen técnicas innovadoras de manejo productivo (empleo de plantines y manejo poscosecha (empleo de bandejas. Con el objetivo de estudiar el impacto sobre el rendimiento de densidades (D1: 35.714; D2: 23.810 y D3: 17.857 pl/ha, tamaños de plantines PG:celda grande (70 cm3, PM:celda mediana (50 cm3 y PP:celda pequeña (20 cm3 y la pérdida de peso fresco durante la poscosecha de turiones de distintos calibres (Large L, Medium M y Small S acondicionados en bandejas con (CF y sin film (SF, se realizó un ensayo, en la Facultad de Agronomía, UNCPBA, en donde se evaluaron las variables: productividad neta comercial (PNCH (kg/ha; por cosecha (PNCC (kg/cosecha; Nº de turiones (NT y peso promedio por turión (PPT. PNCH fue 1º año: 8012,6 kg/ha; 2º año: 4468,86 kg/ha (p < 0,05, mientras que PG:5.757, PM:6.213 y PP:6.688 kg/ha. El PPT de PG:10,46; PM:9,86 y PP:10,77 g/turión. D1 produjo 1069,14 kg/ha más y la mayor cantidad de turiones/ha (648,033. El peso fresco de los turiones acondicionados CF resultó estadísticamente superior (p < 0,05, obteniéndose en promedio 13,0 y para SF 10,45 g/turión. Respecto de los calibres los mayores perdieron menos peso (CF-L:5; CF-M:5; CF-S:9,1 %; SF-L:26; SF-M:35; SF-S: 36,36 %. Solo se conservaron características organolépticas en CF; L:50, M:28,57 y S:14,28 %. Por lo expuesto convendría utilizar D1 y el empleo de bandejas para su acondicionamiento.

  3. Micro-evolutionary diversification among Indian Ocean parrots: temporal and spatial changes in phylogenetic diversity as a consequence of extinction and invasion

    OpenAIRE

    Jackson, H; Jones, C G; Agapow, P-M; Tatayah, V; Groombridge, Jim J.

    2015-01-01

    Almost 90% of global bird extinctions have occurred on islands. The loss of endemic spe- cies from island systems can dramatically alter evolutionary trajectories of insular species biodiversity, resulting in a loss of evolutionary diversity important for species adaptation to changing environments. The Western Indian Ocean islands have been the scene of evolution for a large number of endemic parrots. Since their discovery in the 16th cen- tury, many of these parrots have become extinct or h...

  4. Beverage-Specific Alcohol Sale and Cardiovascular Mortality in Russia

    Directory of Open Access Journals (Sweden)

    Y. E. Razvodovsky

    2010-01-01

    Full Text Available Objective. Recent research evidence suggests that the consumption of different types of alcoholic beverage may have a differential effect on cardiovascular diseases (CVD mortality rates. The aim of this study was to examine the relation between the consumption of different beverage types and CVD mortality rates in Russia across the later-Soviet and post-Soviet periods. Method. Age-standardized male and female CVD mortality data for the period 1970–2005 and data on beverage-specific alcohol sales were obtained Russian State Statistical Committee (Rosstat. Time-series analytical modeling techniques (ARIMA were used to examine the relation between the sales of different alcoholic beverages and CVD mortality rates. Results. Vodka consumption as measured by sales was significantly associated with both male and female CVD mortality rates: a 1 liter increase in vodka sales would result in a 5.3% increase in the male CVD mortality rate and a 3.7% increase in the female rate. The consumption of beer and wine were not associated with CVD mortality rates. Conclusions. The findings from this study suggest that public health efforts should focus on both reducing overall consumption and changing beverage preference away from distilled spirits in order to reduce cardiovascular mortality rates in Russia.

  5. When sex doesn’t sell to men: Mortality salience, disgust and the appeal of products and advertisements featuring sexualized women

    OpenAIRE

    Lee, Seon Min; Heflick, Nathan; Park, Joon Woo; Kim, Heeyoung; Koo, Jieun; Chun, Seungwoo

    2017-01-01

    Although men typically hold favorable views of advertisements featuring female sexuality, from a Terror Management Theory perspective, this should be less the case when thoughts of human mortality are salient. Two experiments conducted in South Korea supported this hypothesis across a variety of products (e.g., perfume and vodka). Men became more negative towards advertisements featuring female sexuality, and had reduced purchase intentions for those products, after thinking about their own m...

  6. The effects of edge-interior and understorey-canopy gradients on the distribution of saproxylic beetles in a temperate lowland forest

    Czech Academy of Sciences Publication Activity Database

    Vodka, Štěpán; Čížek, Lukáš

    2013-01-01

    Roč. 304, SEP 15 (2013), s. 33-41 ISSN 0378-1127 R&D Projects: GA ČR GAP504/12/1952 Grant - others:GA JU(CZ) 168/2013/P; European Social Found(CZ) CZ.1.07/2.3.00/20.0064 Institutional support: RVO:60077344 Keywords : canopy * dead wood * biodiversity Subject RIV: EH - Ecology, Behaviour Impact factor: 2.667, year: 2013 http://www.entu.cas.cz/~cizek/PDFs/VodkaCizek_ForEcoMng_2013.pdf

  7. Combat Stress and Substance Use Intervention

    Science.gov (United States)

    2012-10-01

    has the same calories as a slice of cake? How about a pint of beer – surprised to hear it’s the caloric equivalent of a burger? Wine, beer , spirits...and all our favorite drinks are made by fermenting and distilling natural starch and sugar. Being high in sugar means alcohol contains lots of...actually drinking in one sitting. 88 Standard Drinks: Beer or Cooler Malt Liquor Table Wine 80-proof Spirits gin, vodka, whisky, etc

  8. Need helid on kadunud. Eesti alternatiivmuusika vinüülsinglitel 1989-1993 / Mart Niineste

    Index Scriptorium Estoniae

    Niineste, Mart, 1983-

    2008-01-01

    Heliplaatide J.M.K.E. "Tere Perestroika", Ba-Bach "Russkaya Vodka/ Ma tahan oma raha tagasi", Röövel Ööbik "History Of USSR", Melike "Loverboy", J.M.K.E. "Pieni mies iso tuoppi", Röövel Ööbik "Mamma Mia", Long Off "Long Off EP", J.M.K.E. "Savist Saar", Venanskond "Girl In Black", Kolumbus Kris "Midnight Special", Siiri Sisask "Hold Me Wind", J.M.K.E. "Maailmalõp koju kätte" tutvustus

  9. Factors associated with dental caries in children aged 4-6 years old

    Directory of Open Access Journals (Sweden)

    Nur Widayati

    2014-05-01

    Full Text Available ABSTRACT Dental caries is one of the dental health problems. Dental caries are formed because there was leftover food that sticks to the teeth, which eventually lead to tooth calcification. Impact, teeth become brittle, hollow, even broken.Dental caries experience a loss of power to make a child chewing and digestive disruption, which resulted in growth of less than the maximum. This study aims to determine the relationship of parents’ behavior towards the maintenance of dental health of children (feeding habits sweet, sticky and drinking milk, teeth maintenance, inspection tooth and mouth with dental caries in the TK R.A Bustanussholihin in Balun village Turi District of Lamongan. This study Analytics whose data is collected with a cross sectional sample of kindergarten children aged 4–6 years with a total sample of 49 children. The collection of primary data through interviews parents TK R.A Bustanussholihin student using questionnaires and secondary data obtained from the agency are in the region of the profile data TK R.A Bustanussholihin in Balun Village of Turi District of Lamongan. This study used a correlation coefficient of contingency. Based on the results of the contingency coefficient correlation test showed that the factors that have a strong relationship is the habit of feeding the sweet, sticky, and drink milk with a value of P = 0.504. While the factors that have a weak link is the habit of maintaining dental hygiene habits of children and child oral examination . From this study it can be concluded that there is a relationship or a strong correlation between feeding habits sweet, sticky and drinking milk with the incidence of dental caries in children aged 4–6. So as to prevent dental caries severity we need to hold counseling on feeding sweet, soft and gooey on the effect of dental caries as well as how it should be formula feeding or breast milk to the child to prevent rampant caries. Keywords: dental caries, sweetened

  10. Turismo accesible en el parque natural de Somiedo

    OpenAIRE

    Huerta Valdés, Verónica

    2016-01-01

    El trabajo se basa en analizar la accesibilidad en los destinos turísticos en España, Asturias y principalmente en Somiedo, concejo del Principado de Asturias, caracterizado porque coincide con el parque natural de Somiedo que queda completamente incluido en el, declarado reserva de la biosfera en el año 2000. La finalidad del proyecto consiste en analizar la accesibilidad de los servicios y recursos turísticos existentes en la zona y concretar si el concejo está preparado para recibir a turi...

  11. A case-control study of lung cancer in Polish women

    Energy Technology Data Exchange (ETDEWEB)

    Rachtan, J. [M Sklodowska Curie Member Institute, Krakow (Poland)

    2002-07-01

    This study was undertaken to examine the influence of active and passive smoking, cancer family history, occupational exposure, usual diet and alcohol consumption on female lung cancer risk. A total of 242 women with histologically confirmed primary lung cancer and 352 healthy controls were involved in the study. All subjects were interviewed in the hospital. Data were analysed using multivariate logistic regression. Multivariate analysis has shown that smoking was the most strongly active risk factor in female lung cancer, Positive dose-response relationship was observed between lung cancer risk and number of pack-years. Passive smoking exposure during childhood significantly increased the risk (OR=2.65). There was also observed a significantly increased risk of lung cancer among women who had siblings with history of cancer (OR=3.42). Occupational exposure to coal dust, acid fumes (sulphuric and/or hydrochloric) and materials used for rubber making significantly increased the risk. Frequent intake of carrots (at least five times a week) and also daily intake of other vegetables significantly lowered the risk (OR=0.13, OR=0.24). A significant protective effect was also observed in women frequently using margarine on bread (OR=0.14). Vodka drinkers showed significantly higher risk than non-drinking women. The analysis of dose-response relationship in reference to vodka drinking, also confirmed significant influence of this factor on the risk.

  12. Turismo y Dengue en Cozumel: una aproximación desde sus implicaciones.

    Directory of Open Access Journals (Sweden)

    Alejandro Palafox Muñoz

    2013-01-01

    Full Text Available El turismo es un importante sector estratégico para el crecimiento económico de Quintana Roo, ya que el 75% de su población está involucrada directa o indirectamente con la actividad. Asimismo, en Cozumel, la vida económica se desarrolla alrededor del turismo de cruceros y buceo por la calidad de sus recursos naturales submarinos. Sin embargo, la dependencia económica hacia un sector de la economía, provoca alteraciones en la estructura socioeconómica de las localidades, al verse afectadas por alguna contingencia de tipo ambiental o sanitaria; ejemplo de ello es el brote del virus de la influenza AH1N1 que afectó sensiblemente al sector turístico. En este sentido, el turismo y la salud son dos conceptos estrechamente relacionados, dado que ambos inciden directamente en la economía de los países y son parte de la política social (Chávez, 1994. En la zona del Caribe existe la amenaza de contraer dengue, enfermedad transmitida por el mosquito Aedes aegypti (vector; esta afección viral genera daños cuantiosos en la economía, en las actividades productivas y en el turismo (Zúñiga et al., 2009. Con base en lo anterior, el presente artículo pretende revelar el impacto del dengue en el sector turístico de Cozumel durante el año 2011. La metodología que se aplicó para este estudio está basada en la utilización de métodos cuantitativos (cuestionario y métodos cualitativos (observación directa. La aplicación del instrumento de campo se realizó mediante un muestreo de tipo estratificado con base en las Zonas de Atención Prioritaria (ZAP’s de la localidad (Frausto y Rojas, 2005. Con la información obtenida del trabajo de campo, mediante la aplicación del instrumento a las diferentes colonias, algunos resultados permitirán identificar que la población afectada forma parte del sector turístico, así como también cuáles fueron los impactos de esta enfermedad en el ámbito social y

  13. Nicola Turi (ed., Ecosistemi letterari. Luoghi e paesaggi nella finzione novecentesca

    Directory of Open Access Journals (Sweden)

    Salvatore Renna

    2017-11-01

    Full Text Available In un articolo recentemente apparso per il New York Magazine, il giornalista David Wallace-Wells ha tracciato un quadro quanto mai apocalittico del destino che attende il nostro pianeta nel futuro prossimo. L’interpretazione decisamente pessimistica della situazione ambientale fornita dall’autore, basatosi sui più recenti studi sul cambiamento climatico, ha sollevato non poche polemiche.

  14. In case of criminal bankruptcy, should criminal actions of the perpetrator be additionally qualified as fraud against creditors?

    OpenAIRE

    Rimdžiūtė, Gita

    2017-01-01

    Magistro baigiamojo darbo tema – ar nusikalstamo bankroto atveju kaltininko veiksmai turi būti papildomai kvalifikuojami kaip sukčavimas kreditorių atžvilgiu? Ši tema šiai dienai aktuali, nes Lietuvoje pastebima, kaip daugėja nusikalstamų bankrotų, kurių siekiai būna ne tiksukelti bankrotą, bet kartu pasipelnyti bei išvengti susikaupusių skolų išieškojimo. Oatsiradusteismų praktikoje tokiai problemai pastebėtina, jog nėra vieningos nuomonės sprendžiant šiuos klausimus. Nusikalstamo bankro...

  15. Labour market demand and youth employment opportunities in Lithuania: content analysis of job offer ads

    OpenAIRE

    Brazienė, Rūta; Šalkauskaitė, Ugnė

    2012-01-01

    Straipsnyje pristatoma jaunimo situacijos darbo rinkoje apžvalga ir aptariama jaunimo kaip socialinės grupės specifika. Sisteminant mokslinę literatūrą, nagrinėjama, kokią reikšmę įsitraukimo į darbo rinką galimybėms turi individo disponuojami žmogiškojo ir socialinio kapitalo ištekliai. Darbo pasiūlos skelbimų turinio analize siekiama atskleisti, kokie reikalavimai potencialiems darbuotojams vyrauja Lietuvos darbo rinkoje, analizuojama, kokios jaunų žmonių įsidarbinimo galimybės. Successf...

  16. The search for a metaphysical entity in modern drama

    Directory of Open Access Journals (Sweden)

    Deborha Roos

    1981-03-01

    Full Text Available This is a thirst which all the fountains of the earth cannot quench. Each of these mysterious needs is one side of aperimeter whose complete figure, when we finally perceive it, has one name: GOD" (Bogardt, 1965. In the twentieth cen­ tury man finally murdered God and found himself ‘ left to live in a world hopeless, forlorn, desperate, frustrated, full of agony .... without an answer to the basic human questions”. When did this modern malaise start? In how far is this devastating new truth of nothingness reflected in the arts?

  17. Projektas "Auga"

    OpenAIRE

    Cimnolonskaitė, Rūta

    2014-01-01

    Mus supanti aplinka, joje esantys daiktai, baldai ir kiti objektai, daro didžiulę įtaką kiekvieno žmogaus gyvenimo procesams. O kiekvienas žmogaus atliekamas procesas turi atitinkamas priežastis. Lygiai taip pat yra ir su aplinka, kuri supa kiekvieną iš mūsų. Daiktas nėra tik paprastas objektas/aplinkos sudedamoji dalis. Kiekvieno iš jų atsiradimo priežastis pasąmoningai paaiškinamos noru, o pastarąjį formuoja atitinkamas poreikis. Poreikis – pats savaime yra vidinio psichologinio ar socialin...

  18. Strategy theories implication in lithuanian aerospace enterprises

    OpenAIRE

    Rudminaitis, Vytautas

    2006-01-01

    Dėl nuolat augančios konkurencijos ir aplinkos dinamiškumo strateginio planavimo svarba pastaruoju metu labai išaugo. Strategija – tai priemonė, padedanti pasiruošti pokyčiams ir numatyti artimesnius bei tolimesnius žingsnius. Todėl strategijos formavimo procesas turi būti neatsiejama kiekvienos įmonės valdymo dalis, kadangi sėkmingas strateginio planavimo pritaikymas ne maža dalimi nulemia įmonės sėkmingą veiklą Tyrimo objektas yra strategijos formavimo procesas Lietuvos aeronautikos įmonėse...

  19. Consolidación de un destino turístico: Ibiza a finales del siglo XX

    OpenAIRE

    Cardona, José Ramón; Jiménez Caballero, José Luis (Coordinador)

    2016-01-01

    Ibiza es un destino turístico del Mediterráneo conocido internacionalmente por su oferta de sol y playa, sus discotecas y por la presencia de hippies en el pasado. Desde finales de los cincuenta hasta los setenta, la isla vivió un rápido crecimiento del sector turístico que tuvo impacto en los medios de comunicación. A finales de los setenta aparecieron grupos ecologistas, protestas solicitando frenar el deterioro de la isla y grupos críticos con las consecuencias del turi...

  20. „X“ banko darbuotojų socializacijos organizacijoje tyrimas

    OpenAIRE

    Guzevičienė, Julija

    2013-01-01

    Magistro baigiamajame darbe išanalizuotas naujų darbuotojų socializacijos procesas, įvertinti konkrečios stambios finansinės institucijos naujų darbuotojų socializacijos trūkumai bei privalumai, pateikiamos išvados bei siūlymai organizacijai. Darbe iškelta problema – dažna darbuotojų kaita Lietuvos organizacijose, kuriai turi įtakos prasta naujų darbuotojų socializacija bei nepakankamas dėmesys šiam procesui, kuris privalo būti sistemiškai nukreiptas į visapusišką darbuotojų įsiliejimą į gamy...

  1. Mixing an energy drink with an alcoholic beverage increases motivation for more alcohol in college students.

    Science.gov (United States)

    Marczinski, Cecile A; Fillmore, Mark T; Henges, Amy L; Ramsey, Meagan A; Young, Chelsea R

    2013-02-01

    There has been a dramatic rise in the consumption of alcohol mixed with energy drinks (AmEDs) in social drinkers. It has been suggested that AmED beverages might lead individuals to drink greater quantities of alcohol. This experiment was designed to investigate whether the consumption of AmEDs would alter alcohol priming (i.e., increasing ratings of wanting another drink) compared with alcohol alone. Participants (n = 80) of equal gender attended 1 session where they were randomly assigned to receive 1 of 4 doses (0.91 ml/kg vodka, 1.82 ml/kg energy drink, 0.91 ml/kg vodka mixed with 1.82 ml/kg energy drink [AmED], or a placebo beverage). Alcohol-induced priming of the motivation to drink was assessed by self-reported ratings on the Desire for Drug questionnaire. The priming dose of alcohol increased the subjective ratings of "desire" for more alcohol, consistent with previous research that small doses of alcohol can increase the motivation to drink. Furthermore, higher desire ratings over time were observed with AmEDs compared with alcohol alone. Finally, ratings of liking the drink were similar for the alcohol and AmED conditions. An energy drink may elicit increased alcohol priming. This study provides laboratory evidence that AmED beverages may lead to greater motivation to drink versus the same amount of alcohol consumed alone. Copyright © 2012 by the Research Society on Alcoholism.

  2. Isótopos estáveis e produção de bebidas: de onde vem o carbono que consumimos?

    Directory of Open Access Journals (Sweden)

    Oliveira Ana Cristina B.

    2002-01-01

    Full Text Available A composição isotópica do carbono (delta13C foi utilizada na determinação da origem botânica (C3 x C4 de amostras de café, vinho, cerveja e vodka, de diferentes marcas e procedências, comercializadas no Brasil. Dentre as marcas de café analisadas, apenas uma apresentou um elevado percentual de plantas C4 em sua composição, evidenciado pelo valor de delta13C (-16,2‰. Os valores de delta13C das amostras de vinhos brasileiros, variaram entre -25,1 e -17,1‰, indicando a presença de carbono de origem C4 nas amostras que tiveram os maiores valores de delta13C. Duas marcas de vinhos importados, por sua vez, apresentaram delta13C característico de planta C3 (-27,1 e -26,3‰. Os valores de delta13C das vodkas importadas variaram entre -26,4 e -23,9‰, e as brasileiras entre -12,8 e -11,8‰, excetuando-se uma marca que apresentou valor -23,1‰. As marcas de cervejas importadas, em sua maioria, apresentaram valores mais negativos (-27,3 a -20,7‰ que as nacionais (-25,9 a -18,4‰. Estes resultados evidenciam a eficiência desta metodologia na determinação da origem do C e percentual de mistura destas bebidas.

  3. Absenteeism movement in Greater Poland in 1840–1902

    OpenAIRE

    Izabela Krasińska

    2013-01-01

    The article presents the origins and development of the idea of absenteeism in Greater Poland in the 19th century. The start date for the research is 1840, which is considered to be a breakthrough year in the history of an organized absenteeism movement in Greater Poland. It was due to the Association for the Suppression of the Use of Vodka (Towarzystwo ku Przytłumieniu Używania Wódki) in the Great Duchy of Posen that was then established in Kórnik. It was a secular organization that came int...

  4. Turismo cultural, transiciones en términos de género y su prospectiva.

    Directory of Open Access Journals (Sweden)

    He\\u0301ctor Paulino Serrano Barqui\\u0301n

    2013-01-01

    Full Text Available El turismo cultural puede concebirse desde distintos ángulos, por lo que sus definiciones han cambiado a lo largo de los años. En este artículo se plantean ciertos fundamentos teórico–filosóficos sobre el concepto de viaje cultural desde la perspectiva del arte y la cultura tal y como se concebía en el siglo XIX que, según los archivos investigados, hubo un hombre a quien se le podía catalogar como el pionero o predecesor del turismo cultural en el Estado de México, constituyendo así un referente principalmente masculino. De esta manera, estos conceptos se concretan en un personaje llamado Felipe Santiago Gutiérrez, pintor y crítico de arte de dicho siglo. Más adelante se revisan algunas particularidades que incrementan el número de mujeres que disfrutan del turismo cultural en la actualidad; éstas se analizan desde la perspectiva de género, de modo tal que, al momento de esta indagación, se aprecian experiencias turísticas muy exitosas y particulares de viajeras o promotoras culturales, a quienes se les ha reconocido una presencia relevante. Finalmente, se comentan algunas experiencias de mujeres que han laborado en lugares para el desarrollo de actividades turísticas, y algunos casos de turismo cultural para el número creciente de personas que cuentan con perfiles y demandas muy específicas.

  5. The content and import of mediation as a collective labour dispute settlement method

    OpenAIRE

    Žekonis, Vytautas

    2010-01-01

    Gyvenant šiuolaikinėje visuomenėje, kurioje dominuoja rinkos santykiai, susiduriame su įvairiausio pobūdžio konfliktais. Konfliktiškumas būdingas ir kolektyviniams darbo santykiams. Šie santykiai yra sutartiniai darbo teisiniai santykiai, todėl ir ginčai kylantys šių santykių srityje turi būti sprendžiami šalių tarpusavio derybomis. Be to, Lietuvoje dar tik bandoma tinkamai įteisinti vieną iš populiariausių taikų kolektyvinių darbo ginčo sprendimo metodų – tarpininkavimą, sprendžiant kolektyv...

  6. Hallucinogenic mushrooms

    OpenAIRE

    Reingardienė, Dagmara; Vilčinskaitė, Jolita; Lažauskas, Robertas

    2005-01-01

    Haliucinogeninių grybų grupė (kiškiabudės, karteklės, mėšlinuko, skydabudės, glotniagalvės, gleiviabudės rūšys) yra psilocibino turintys grybai. Šie magiški psichoaktyvūs grybai turi serotonerginio haliucinogeno psilocibino. Psilocibinas ir jo aktyvus metabolitas psilocinas yra panašūs į lizerginės rūgšties dietilamidą (LSD). Jie greitai sukelia centrinės nervų sistemos pokyčių: ataksiją, hiperkinezę ir haliucinacijas. Šiame apžvalginiame straipsnyje analizuojama haliucinogeninių grybų vartoj...

  7. El conflicto entre turismo y protección ambiental: el caso del municipio de Isla Mujeres en la península de Yucatán

    OpenAIRE

    Ay Robertos, Flor de Anahí

    2010-01-01

    Desde la teoría de conflicto y apoyándonos en los conceptos de turismo sustentable y sus dificultades de puesta en práctica en las Áreas Naturales Protegidas, se construye un análisis del conflicto y sus actores desde la Investigación Acción Participativa útil para el manejo y resolución de conflictos generados en un territorio de fuerte explotación turística y con recursos naturales de alto valor económico y ambiental, localizado en los límites del, municipio de Isla Mujeres con...

  8. Handbook on theoretical and algorithmic aspects of sensor, ad hoc wireless, and peer-to-peer networks

    CERN Document Server

    Wu, Jie

    2005-01-01

    PrefaceAD HOC WIRELESS NETWORKSA Modular Cross Layer Architecture for Ad Hoc Networks, M. Conti, J. Crowcroft, G. Maselli, and G. TuriRouting Scalability in MANETs, J. Eriksson, S. Krishnamurthy and M. FaloutsosUniformly Distributed Algorithm for Virtual Backbone Routing in Ad Hoc Wireless Networks, D.S. KimMaximum Necessary Hop Count for Packet Routing in MANET, X. Chen and J. ShenEfficient Strategyproof Multicast in Selfish Wireless Networks, X.-Yang LiGeocasting in Ad Hoc and Sensor Networks, I. StojmenovicTopology Control for Ad hoc Networks: Present Solutions and Open Issues, C.-C. Shen a

  9. Būsimųjų muzikos mokytojų individualiojo vokalinio ugdymo strategija

    OpenAIRE

    Jucevičiūtė-Bartkevičienė, Vaiva

    2014-01-01

    Dėmesys individualiojo vokalinio ugdymo problematikai tampa aktualus, kalbant apie būsimuosius muzikos mokytojus, kurie, siekdami užtikrinti visavertį savo ugdytinių tobulėjimą, turi įgyti tvirtą vokalinių žinių, gebėjimų ir įgūdžių pagrindą, plėtoti ne tik savo dalykines, bet ir bendrąsias kompetencijas, pasiruošti naujų pedagoginių vaidmenų atlikimui. Disertacijos tyrimo tikslas – parengti būsimųjų muzikos mokytojų individualiojo vokalinio ugdymo strategiją. Ginamieji disertacijos teiginiai...

  10. Red wine intake but not other alcoholic beverages increases total antioxidant capacity and improves pro-inflammatory profile after an oral fat diet in healthy volunteers.

    Science.gov (United States)

    Torres, A; Cachofeiro, V; Millán, J; Lahera, V; Nieto, M L; Martín, R; Bello, E; Alvarez-Sala, L A

    2015-12-01

    Different alcoholic beverages exert different effects on inflammation and oxidative stress but these results are controversial and scanty in some aspects. We analyze the effect of different alcoholic beverages after a fat-enriched diet on lipid profile, inflammatory factors and oxidative stress in healthy people in a controlled environment. We have performed a cross-over design in five different weeks. Sixteen healthy volunteers have received the same oral fat-enriched diet (1486kcal/m(2)) and a daily total amount of 16g/m(2) of alcohol, of different beverages (red wine, vodka, brandy or rum) and equivalent caloric intakes as sugar with water in the control group. We have measured the levels of serum lipids, high sensitivity C-reactive protein (hsCRP), tumor necrosis factor α (TNFα), interleukin 6 (IL-6), soluble phospholipase A2 (sPLA2), lipid peroxidation (LPO) and total antioxidant capacity (TAC). Red wine intake was associated with decreased of mean concentrations of hsCRP, TNFα and IL-6 induced by fat-enriched diet (p<0.05); nevertheless, sPLA2 concentrations were not significantly modified. After a fat-enriched diet added with red wine, TAC increased as compared to the same diet supplemented with rum, brandy, vodka or the control (water with sugar) (p<0.05). Moderate red wine intake, but not other alcoholic beverages, decreased pro-inflammatory factors and increased total antioxidant capacity despite a fat-enriched diet intake in healthy young volunteers. Copyright © 2015 Elsevier España, S.L.U. y Sociedad Española de Medicina Interna (SEMI). All rights reserved.

  11. PUBLICITY IN TOURISM - RELATION BETWEEN ROMANIA AND UKRAINE

    Directory of Open Access Journals (Sweden)

    Adriana Mihaela PORCUŢAN

    2010-06-01

    Full Text Available Publicitatea în turism - Relaţia dintre România şi Ucraina. Euroregiunile sunt un fapt în lumea modernă, cât şi în turismul care se poate dezvolta între ţările care împart aceeaşi graniţă. În lucrarea de faţă noi vom face referire la România şi Ucraina. Ele împart aceeaşi graniţă, o parte din atracţiile naturale, culturale, etnice, religioase, dar nu au acceaşi importanţă în turismul internaţional. În cazul promovării în turism, internetul este o cale foarte importantă de a prezenta o atracţie, o sursă foarte rapidă, ieftină şi disponibilă oricând pentru turişti şi pentru a găsi informaţiile pe care le caută. Dacă facem o comparaţie între promovarea turismului în România şi Ucraina, găsim mari diferenţe pentru că România este o ţară care se concentrează pe turismul extern, iar Ucraina se concentrează pe cel intern, fiind a şaptea ţară în lume ca receptoare de turişti. Acest lucru este arătat şi de limba care este folosită de site-urile fiecărei ţări: aproape numai română în România, engleză şi ucraineană în Ucraina.

  12. Consumer buying behavior in fashion retailing

    OpenAIRE

    Ramoškaitė, Neringa

    2011-01-01

    Temos aktualumas. Pasaulinė mados pramonė yra vienas iš svarbiausių ekonomikos sektorių kapitalo, pajamų, prekybos ir darbo vietos požiūriu visame pasaulyje. Aprangos pramonė turi trumpą produkto gyvavimo ciklą, milžinišką produktų įvairovę, nepastovią ir nenuspėjamą paklausą, ilgus ir lanksčius tiekimo procesus. Mados mažmenininkų gebėjimas greitai pristatyti naujausią madą parduotuvėje dabar yra būtinybė, nes mados stiliai ir tendencijos keičiasi vis greičiau ir reguliariau. Yra mados mažme...

  13. Socioeconomic influences on alcohol use patterns among private school students in São Paulo Influências socioeconómicas no padrão de consumo de álcool entre estudantes de escolas privadas em São Paulo

    Directory of Open Access Journals (Sweden)

    Danilo Locatelli

    2012-06-01

    Full Text Available OBJECTIVES: To describe alcohol use by socioeconomic level and gender among private high school students in the city of São Paulo, Brazil. METHODS: Cross-sectional study of students in private schools in São Paulo. An anonymous self-administered questionnaire was distributed in the classroom. A total of 2,613 students were selected by the stratification and conglomerate methods. Chi-squared tests, t-tests and ANOVA were used to test for associations between alcohol use and gender and socioeconomic status; for binge drinking, an ordered logistic regression model was developed. RESULTS: Overall, 88% of students reported lifetime alcohol use, with 31.6% in combination with energy drinks. Half of the students (51.3% reported alcohol use in the last month, most frequently beer (35.2%, alcopop (32% and vodka (31.7%; 33.2% reported binge drinking in the last month (5 drinks per occasion. Most evaluated parameters showed higher rates of use among males and higher social classes. The regression model exhibited an increasing rate of binge drinking with increasing socioeconomic status. CONCLUSIONS: The results suggest that socioeconomic features help to define alcohol use among São Paulo students. Use behaviors such as binge drinking are more prevalent among students from the upper social classes.OBJETIVOS: Descrever o consumo de álcool por nível socioeconômico e gênero entre estudantes de ensino médio da rede privada na cidade de São Paulo. MÉTODOS: Estudo transversal com amostra representativa da rede privada de ensino de São Paulo. Foi aplicado em sala de aula um questionário anônimo de autopreenchimento. 2.613 estudantes foram selecionados por método de estratificação e de conglomerados. Para verificar associação entre os padrões de consumo de álcool por gênero e nível socioeconômico, foi utilizado teste do qui-quadrado, teste t e ANOVA; para binge drinking, foi desenvolvido um modelo de regressão logística ordenada. RESULTADOS

  14. Alternativas para enfrentar las actuales exigencias del mercado de espárrago (Asparagus officinalis L. verde en Argentina. 1. Empleo de híbridos

    Directory of Open Access Journals (Sweden)

    Ana M. Castagnino

    2012-01-01

    Full Text Available A fin de determinar la productividad de híbridos de espárrago verde: 7 de origen italiano y un testigo americano (UC-157, en su segunda cosecha, se realizó un ensayo el 22/11/2006, con dos tamaños de plantines (PG y PP. Se determinó: producción fresca total (PFT y por cosecha (PFTC, producción comercial (PFN y por cosecha (PFNC, número de turiones totales (NTT, comerciales (NT, comerciales por cosecha (NTC y por planta (NTP, peso promedio por turión (PPT y distribución de calibres. Para todas las variables se destacó PG. En promedio, PFT fue de 13.287 kg/ha, PFN: 5.791 kg/ha, mientras que NT: 452.479 turiones/ha, lográndose una productividad por planta de 558 g totales y 243 g netos, y NTP de 19 turiones/planta. El PPT fue 12,95 g. Respecto de los híbridos, en PFT se destacó UC-157, seguido de Zeno, Eros, Ercole y H668 kg/ha (p < 0,05; mientras que en PFNC: UC-157 286,1; seguido por Giove 231,4; Zeno 230,7; Ercole 227,9 y Eros 224,3 kg/cosecha (p < 0,05. En NT, UC-157 produjo 186.646 turiones/ha comerciales más, respecto al promedio obtenido del conjunto de genotipos italianos, siendo el que menos turiones produjo Giove: 361.179 turiones/ha. En NTC, se destacó UC-157, seguido por Zeno y Ercole (p < 0,05. Logró mayor PPT Giove (16,7, seguido de Eros (13,1 y H668 (12,8 g/turión. En calibres el 43 % correspondió a L. Los genotipos italianos presentaron turiones de mayores calibres y menor defecto de espigado.

  15. Alternativas para enfrentar las actuales exigencias del mercado de espárrago (Asparagus officinalis L. verde en Argentina. 1. Empleo de híbridos

    Directory of Open Access Journals (Sweden)

    Ana M. Castagnino

    2012-12-01

    Full Text Available A fin de determinar la productividad de híbridos de espárrago verde: 7 de origen italiano y un testigo americano (UC-157, en su segunda cosecha, se realizó un ensayo el 22/11/2006, con dos tamaños de plantines (PG y PP. Se determinó: producción fresca total (PFT y por cosecha (PFTC, producción comercial (PFN y por cosecha (PFNC, número de turiones totales (NTT, comerciales (NT, comerciales por cosecha (NTC y por planta (NTP, peso promedio por turión (PPT y distribución de calibres. Para todas las variables se destacó PG. En promedio, PFT fue de 13.287 kg/ha, PFN: 5.791 kg/ha, mientras que NT: 452.479 turiones/ha, lográndose una productividad por planta de 558 g totales y 243 g netos, y NTP de 19 turiones/planta. El PPT fue 12,95 g. Respecto de los híbridos, en PFT se destacó UC-157, seguido de Zeno, Eros, Ercole y H668 kg/ha (p < 0,05; mientras que en PFNC: UC-157 286,1; seguido por Giove 231,4; Zeno 230,7; Ercole 227,9 y Eros 224,3 kg/cosecha (p < 0,05. En NT, UC-157 produjo 186.646 turiones/ha comerciales más, respecto al promedio obtenido del conjunto de genotipos italianos, siendo el que menos turiones produjo Giove: 361.179 turiones/ha. En NTC, se destacó UC-157, seguido por Zeno y Ercole (p < 0,05. Logró mayor PPT Giove (16,7, seguido de Eros (13,1 y H668 (12,8 g/turión. En calibres el 43 % correspondió a L. Los genotipos italianos presentaron turiones de mayores calibres y menor defecto de espigado.

  16. Crisis Management in Information Society. Public Relations

    OpenAIRE

    Galkauskas, Gediminas

    2006-01-01

    Magistro darbo objektas - krizių vadyba informacinėje visuomenėje ryšių su visuomene priemonėmis. Darbo tikslas yra išnagrinėti krizių vadybos ir komunikacijos literatūrą bei suformuoti teorinį modelį kaip efektyviai valdyti krizes RSV pagalba, o tuo pačiu nustatyti kaip Lietuvos įmonės yra pasiruošusios krizėms ir savo reputacijos gynimui. Pagrindiniai darbo uždaviniai: išanalizuoti teorinę medžiagą ir sukurti teorinį modelį kaip įmonės turi elgtis krizės metu, kad sėkmingai spręstų iškilusi...

  17. Is a social network provider responsible for a damage caused by illegal actions of the users?

    OpenAIRE

    Sirbikytė, Gintarė

    2013-01-01

    Socialiniai tinklai viešojoje erdvėje pasirodė 2005 m. – 2007 m. Nuo jų viešo pasirodymo internete praėjo septyneri metai, tačiau jų populiarumas vis dar auga. Pasaulyje priskaičiuojama apie 150 aktyviai veikiančių socialinių tinklų iš kurių net 13 turi daugiau nei po šimtą milijonų naudotojų. Socialinių tinklų veikimas paremtas informacijos sklaida t. y. įgyvendinant saviraiškos laisvės, informacijos laisvės bei teisės į informaciją nuostatas. Tačiau saviraiškos laisvė nėra absoliuti. Asmens...

  18. Limitations of rights of a trade mark owner

    OpenAIRE

    Pociūtė, Dovilė

    2011-01-01

    Prekių ženklo savininko teisių apribojimai – savininko teisių išimtys, atimančios iš registruoto prekių ženklo savininko teisę uždrausti tretiesiems asmenims naudoti žymenį, net ir tapatų ar klaidinamai panašų į jiems priklausantį prekių ženklą. Tam, kad trečiųjų asmenų veiksmai (savo vardo, adreso, nuorodų, susijusių su paslaugų bei prekių charakteristika bei paskirtimi naudojimas) patektų į apribojimus nustatančių nuostatų turinį ir būtų nebaudžiami, žymuo turi būti naudojamas prekybos veik...

  19. Acute cholestatic liver injury caused by polyhexamethyleneguanidine hydrochloride admixed to ethyl alcohol.

    Science.gov (United States)

    Ostapenko, Y N; Brusin, K M; Zobnin, Y V; Shchupak, A Y; Vishnevetskiy, M K; Sentsov, V G; Novikova, O V; Alekseenko, S A; Lebed'ko, O A; Puchkov, Y B

    2011-07-01

    Polyhexamethyleneguanidine hydrochloride (PHMG) is an antimicrobial biocide of the guanidine family. In the period from August 2006 to May 2007, more than 12500 patients were admitted to hospital with a history of drinking illegal cheap "vodka" in 44 different regions in Russia, of whom 9.4% died. In reality, the "vodka" was an antiseptic liquid composed of ethanol (≈93%), diethyl phthalate, and 0.1-0.14% PHMG (brand name "Extrasept-1"). We performed an analysis of the clinical features and outcome in four poisoning treatment centers in the cities of Perm, Ekaterinburg, Irkutsk, and Khabarovsk. A total of 579 patients (215 females and 364 males) with similar symptoms were included. The main symptoms on admission included jaundice (99.7%), skin itch (78.4%), weakness (96%), anorexia (65.8%), dizziness (65.3%), nausea (54.8%), vomiting (22.6%), stomach ache (52.7%), diarrhea (32%), and fever (50%). Mild symptoms were found in 2.5% of cases, moderate in 63%, and severe in 34.5%. Laboratory results were (mean ± SD): total bilirubin 249 ± 158 μmol/L, direct bilirubin 166 ± 97 μmol/L, cholesterol 14 ± 8 mmol/L, alanine aminotransferase 207 ± 174 IU/L, aspartate aminotransferase 174 ± 230 IU/L, alkaline phosphatase 742 ± 751 IU/L, and gamma-glutamyltranspeptidase 1199 ± 1095 IU/L. Patients generally recovered over a period of 1-5 months, although high levels of alkaline phosphatase and gamma-glutamyltranspeptidase were still found in all patients examined after 6 months. Sixty-one patients (10.5%) died between 23 and 150 days after poisoning. Local cholestasis, inflammatory infiltration, and fibrosis developing into cirrhosis were found by liver biopsy. Acute liver injury caused by PHMG-hydrochloride or PHMG in combination with either ethanol or diethyl phthalate can be characterized as cholestatic hepatitis with a severe inflammatory component causing high mortality.

  20. Determination of Copper in Different Ethanolic Matrices Using a Chloropropyl Silica Gel Modified with a Nanostructured Cubic Octa(3-aminopropyloctasilsesquioxane

    Directory of Open Access Journals (Sweden)

    Devaney Ribeiro Do Carmo

    2013-01-01

    Full Text Available The chloropropyl silica gel was modified with octa(3-aminopropyloctasilsesquioxane and characterized by Fourier transform infrared (FTIR spectroscopy, nuclear magnetic resonance (NMR, spectroscopies, and surface and area porosity. The specific sorption capacity of metallic ions (Cu2+ and Ni2+ increases in the following solvent order: water < ethanol 42% < ethanol < ketone. The high values of the constant (K in the order of 103 L mol−1 suggested the high adsorbent capacity of the modified silica (SGAPC for Cu2+ and Ni2+. SGAPC was applied to a separation column and shows recoveries of around 100% of copper in samples of sugar cane spirit, vodka, ginger brandy, and ethanol fuel.

  1. Zimnij put’ u Puškina. (Nacional’naja priroda kuchnja istorii kak kul’tury)

    OpenAIRE

    Ivanickij, Aleksandr

    1998-01-01

    In The Snowstorm, Captain's daughter and Eugene Onegin (chapter V, The dream of Tatyana) Pushkin's heroes of adventurous or sentimental novels are becoming partly fairy tales heroes and their roads in lives are receiving national and historical meaning. First, the adventurous way for the hero is laid by the fairy nature. Acting like a storm reforming the world, nature is continued in history (the 1812 war), or tallies with history (Pugachev's rebellion). The storm joins a...

  2. Does legislation to prevent alcohol sales to drunk individuals work? Measuring the propensity for night-time sales to drunks in a UK city.

    Science.gov (United States)

    Hughes, Karen; Bellis, Mark A; Leckenby, Nicola; Quigg, Zara; Hardcastle, Katherine; Sharples, Olivia; Llewellyn, David J

    2014-05-01

    By measuring alcohol retailers' propensity to illegally sell alcohol to young people who appear highly intoxicated, we examine whether UK legislation is effective at preventing health harms resulting from drunk individuals continuing to access alcohol. 73 randomly selected pubs, bars and nightclubs in a city in North West England were subjected to an alcohol purchase test by pseudo-drunk actors. Observers recorded venue characteristics to identify poorly managed and problematic (PMP) bars. 83.6% of purchase attempts resulted in a sale of alcohol to a pseudo-intoxicated actor. Alcohol sales increased with the number of PMP markers bars had, yet even in those with no markers, 66.7% of purchase attempts resulted in a sale. Bar servers often recognised signs of drunkenness in actors, but still served them. In 18% of alcohol sales, servers attempted to up-sell by suggesting actors purchase double rather than single vodkas. UK law preventing sales of alcohol to drunks is routinely broken in nightlife environments, yet prosecutions are rare. Nightlife drunkenness places enormous burdens on health and health services. Preventing alcohol sales to drunks should be a public health priority, while policy failures on issues, such as alcohol pricing, are revisited.

  3. Analysis of canine overweight and obesity

    OpenAIRE

    Morkūnaitė, Justina

    2014-01-01

    Darbo tikslas: išnagrinėti šunų nutukimo ir viršsvorio pasireiškimo dažnumą, priežastis ir svorio kontroliavimo galimybes. Darbo uždaviniai: 1. Išsiaiškinti, kokius sveikatos sutrikimus dažniausiai patiria nutukę šunys. 2. Įvertinti tiriamus šunis pagal kūno kondicijos skalę nuo 1 iki 5 balų. 3. Išnagrinėti nutukimo priežastis bei išsiaiškinti, kokią įtaką viršsvoriui turi šunų šėrimo ypatybės ir gyvenimo sąlygos. Tyrimai atlikti LSMU VA Dr. Leono Kriaučeliūno smulkiųjų ...

  4. Phthalate Esters and Reproductive Toxicity** Presentation requested by State of Mass Use Reductions Committee-TURI

    Science.gov (United States)

    Phthalate esters and reproductive toxicity the presentation described the uses of phthalates, the toxicity to mammals with a focus on reproductive toxicity and the potency of these chemicals to disrupt mammalian reproductive development in utero

  5. Longitudinal prediction of divorce in Russia: the role of individual and couple drinking patterns.

    Science.gov (United States)

    Keenan, Katherine; Kenward, Michael G; Grundy, Emily; Leon, David A

    2013-01-01

    The aim of the study was to explore associations between dimensions of alcohol use in married couples and subsequent divorce in Russia using longitudinal data. Follow-up data on 7157 married couples were extracted from 14 consecutive annual rounds (1994-2010) of the Russian Longitudinal Monitoring Survey, a national population-based panel study. Discrete-time hazard models were fitted to estimate the probability of divorce among married couples by drinking patterns reported in the previous survey wave. In adjusted models, increased odds of divorce were associated with greater frequency of husband and wife drinking (test for trend P = 0.005, and P = 0.05, respectively), wife's binge drinking (P = 0.05) and husband's heavy vodka drinking (P = 0.005). Couples in whom the wife drank more frequently than the husband were more likely to divorce (OR 2.86, 95% CI 1.52-5.36), compared with other combinations of drinking. The association between drinking and divorce was stronger in regions outside Moscow or St. Petersburg. This study adds to the sparse literature on the topic and suggests that in Russia heavy and frequent drinking of both husbands and wives put couples at greater risk of future divorce, with some variation by region and aspect of alcohol use.

  6. NMR investigation of acrolein stability in hydroalcoholic solution as a foundation for the valid HS-SPME/GC-MS quantification of the unsaturated aldehyde in beverages.

    Science.gov (United States)

    Kächele, Martin; Monakhova, Yulia B; Kuballa, Thomas; Lachenmeier, Dirk W

    2014-04-11

    Acrolein (propenal) is found in many foods and beverages and may pose a health hazard due to its cytotoxicity. Considerable knowledge gaps regarding human exposure to acrolein exist, and there is a lack of reliable analytical methods. Hydroalcoholic dilutions prepared for calibration purposes from pure acrolein show considerable degradation of the compound and nuclear magnetic resonance (NMR) spectroscopy showed that 1,3,3-propanetriol and 3-hydroxypropionaldehyde are formed. The degradation can be prevented by addition of hydroquinone as stabilizer to the calibration solutions, which then show linear concentration-response behaviour required for quantitative analysis. The stabilized calibration solutions were used for quantitative headspace solid-phase microextraction/gas chromatography-mass spectrometry (HS-SPME/GC-MS) determination of acrolein in alcoholic beverages with a detection limit of 14 μg L(-1). Of 117 tested alcoholic beverages, 64 were tested positive with the highest incidence in grape marc spirits and whiskey (100%, mean 252 μg L(-1)), followed by fruit spirits (86%, mean 591 μg/L(-1)), tequila (86%, mean 404 μg L(-1)), Asian spirits (43%, mean 54 μg L(-1)) and wine (9%, mean 0.7 μg L(-1)). Acrolein could not be detected in beer, vodka, absinthe and bottled water. Six of the fruit and grape marc spirits had acrolein levels above the World Health Organization (WHO) provisional tolerable concentration of 1.5 mg L(-1). Copyright © 2014 Elsevier B.V. All rights reserved.

  7. The Enzymatic Approach to Making of Alcoholic Beverages

    Directory of Open Access Journals (Sweden)

    Dilbar Mirzarakhmetova

    2011-11-01

    Full Text Available Immobilized yeast invertase was applied for treatment of alcoholic beverages with the aim of transformation of higher alcohols into alkylfructosides. Gas-liquid chromatography of treated water-alcoholic medium containing 3.0 mg/l isoamyl alcohol and 4% saccharose by immobilized invertase had shown the convertion of 40% isoamyl alcohol, which amounts to 1.8 mg/l absolute alcohol. Other parameters remained at the previous level. The high level of enzyme activity was observed when the initial concentration of sucrose in the reaction mixture attained 4.0-12.5%. Tasting of treated samples indicated the improvement of quality and degustational properties of beverages, they had softer and more harmonious taste and aroma in comparison with control sample and finished Vodka, which completed the cycle of technological processing.

  8. Price elasticities of alcohol demand: evidence from Russia.

    Science.gov (United States)

    Goryakin, Yevgeniy; Roberts, Bayard; McKee, Martin

    2015-03-01

    In this paper, we estimate price elasticities of demand of several types of alcoholic drinks, using 14 rounds of data from the Russia Longitudinal Monitoring Survey-HSE, collected from 1994 until 2009. We deal with potential confounding problems by taking advantage of a large number of control variables, as well as by estimating community fixed effect models. All in all, although alcohol prices do appear to influence consumption behaviour in Russia, in most cases the size of effect is modest. The finding that two particularly problematic drinks-cheap vodka and fortified wine-are substitute goods also suggests that increasing their prices may not lead to smaller alcohol consumption. Therefore, any alcohol pricing policies in Russia must be supplemented with other measures, such as restrictions on numbers of sales outlets or their opening times.

  9. Les Bruits en lettres brute. Variations onomatopéiques dans trois mouvements d’avant-garde au XXe siècle: Futurisme, Dadaïsme, Lettrisme

    Directory of Open Access Journals (Sweden)

    Noemie Fargier

    2017-07-01

    Full Text Available Standing between an original expression and a universal language, a poetic game and a linguistic system, onomatopoeia occupied a cen­tral spot in three avan­t-gardes of the twen­tieth-cen­tury: futurism, dadaism, lettrism, regarding their own artistic research and the competition between them. Audible, graphic and linguistic material composing works halfway between poetry, music and graphic arts, onomatopoeia seems to converge in the three avan­t-gardes’ artistic and historic goals because of their intermedial, interdisciplinary and transnational dimension. They assert themselves by shaping this ambiguous material in a new approach, and each of them pretends to be the inven­tor of the onomatopoeic creation. Questioning origin, onomatopoeia looks however toward novelty, and wish to appear as a modern medium, with which the so-called fossilized arts could be revolutionized.

  10. Studies on Morphological and Phylogenetic Relationship of Salak Pondoh Varieties (Salacca zalacca (Gaert. Voss. at Sleman Highlands

    Directory of Open Access Journals (Sweden)

    NUR HIDAYAH

    2000-07-01

    Full Text Available The objectives of the study were to know the morphological variation of salak-plants (Salacca zalacca (Gaert. Voss. and their relationship. The study was conducted in May to April 2000, at Turi and Pakem of Sleman district, Yogyakarta. Samples were randomly taken, 5 plants of each variety were studied their morphological characters such as stem, leaf, flower and fruit. The data collected were then analyzed descriptive comparatively and their relationships were then determined. The result of the study indicate that there were at least 8 varieties of salak at Sleman district, green-, black-, yellow-, manggala-, red-yellow-, golden-, red-, and red-black pondoh. Morphological differences among varieties were markedly different. The closest relationship was found between variety of red-black- and black pondoh, while the farthest relationship among the varieties was manggala pondoh.

  11. La competitividad de los destinos turísticos. Diseño de una investigación

    OpenAIRE

    Andrades Castillo, Lidia

    2017-01-01

    La conferencia-taller abordaró los siguientes aspectos: 1.- Estado de la cuestión de las investigación en turismo  2-. Un mapa conceptual de las tendencias identificadas en las revistas. El mapa se puede estructurar en tres ejes: Destinos; Empresas; Turistas. 3.- Metodologías de investigación en turismo: a) Utilizar una escala existente para medir un fenómeno en un destino concreto o para un segmento especifico b) Crear una escala nueva: pasos a seguir y aspectos a considerar ...

  12. Utilizzo di vitigni di antica coltivazione del Meridione d'Italia per la produzione di vini passiti di pregio

    Directory of Open Access Journals (Sweden)

    Antonacci Donato

    2017-01-01

    Full Text Available In recent years the wine sector has been characterized by an increased focus on the diversification of wine products. This change has been welcomed by consumers. In fact, today's consumers are willing to experiment with new products and unusual combinationswhich has stimulated research aimed at the discovery of native grape varieties suitable for for winemaking. In this context, particular attention are receiving vines for the production of dessert wines. Many regions have made efforts in the search for varieties and techniques able to better promote the drying process. At CREA-VE Turi-BA, there is an ongoing recovery and exploitation of indigenous grape varieties in the regions of Southern Italy and today more than 3,000 accessions of wine grapes are preserved. In the present work we have investigate the possibility of the use of certain accessions of Vitis vinifera varieties (collection CREA-VE Turi-BA deemed attractive for the production of dessert wines. Accessions presenting a good sugar content and a good titratable acidity were selected; namely, Greco bianco b. (named Q19 and Mantonico bianco b. (named R8 were compared to the cv of Malvasia di Lipari b. Ampelographic and ampelometric analyses, followed by molecular analysis, were carried out for varietal assessment. A rate of the grapes were fermented immediately after harvest with standard procedure, in comparison to rates vinified after withering. The latter was made in a greenhouse type structure with parts of natural and unforced air, without any additional energy expense. At the end of the process, a loss in weight of the grapes equal to 30–35% was realized. The grapes are then stemmed, crushed, pressed and fermented by selected yeast under controlled temperature. Upon completion of the fermentation and subsequent stabilization, the wines were analyzed for the most important enological parameters and subjected to evaluation by a panel of expert tasters. Chemical analysis of wines

  13. Caracteres agronómicos en el cultivo de espárrago de diferentes edades y manejos Agronomic characters in asparagus of different ages and crop systems

    Directory of Open Access Journals (Sweden)

    Pablo Diego Asprelli

    2005-01-01

    Full Text Available El objetivo del trabajo fue evaluar el efecto de la edad de la planta y la respuesta a los manejos en 11 híbridos de espárrago (Asparagus officinalis L.. Se utilizó un diseño en bloques completos aleatorios con tres repeticiones de 20 plantas por parcela, con tres y cuatro años de edad, según dos sistemas de manejo: con surcos alomados para la producción de espárrago blanco y surcos sin alomar para espárrago verde. Con el manejo para espárrago blanco se obtuvieron mayores valores promedio para días a brotación, rendimiento de mercado, rendimiento total, número de turiones y peso promedio del turión. Sin embargo, la tasa de incremento del primer al segundo año de cosecha para rendimiento de mercado y rendimiento total resultó superior en el manejo verde debido a una tasa de incremento superior para número de turiones. Para días a brotación y peso promedio del turión, la respuesta debida al efecto del manejo y de la edad del cultivo fue similar, mientras que días al 50% de parcela brotada se vio afectada principalmente por la edad de la planta.Age and crop system effects on agronomic response were evaluated in 11 hybrids of Asparagus officinalis L. The experimental design was a complete randomized block with three replicates of 20 plants of 3 or 4 years old, conducted either in mounded soil over plants for blanched asparagus, or in raised beds without ridging for green asparagus. The highest mean values were obtained under the blanched production for days to harvest, market yield, total yield, spears number and the spear mean weight. However, under the green production, the rate of increment from first to second year was superior for market yield and total yield due to an augmented rate of increment of spears number. Type and year of production effects were similar for days to first harvest and spears mean weight, meanwhile days to 50% of sprout plot was affected mainly by the year of production.

  14. When sex doesn't sell to men: mortality salience, disgust and the appeal of products and advertisements featuring sexualized women.

    Science.gov (United States)

    Lee, Seon Min; Heflick, Nathan A; Park, Joon Woo; Kim, Heeyoung; Koo, Jieun; Chun, Seungwoo

    2017-01-01

    Although men typically hold favorable views of advertisements featuring female sexuality, from a Terror Management Theory perspective, this should be less the case when thoughts of human mortality are salient. Two experiments conducted in South Korea supported this hypothesis across a variety of products (e.g., perfume and vodka). Men became more negative towards advertisements featuring female sexuality, and had reduced purchase intentions for those products, after thinking about their own mortality. Study 2 found that these effects were mediated by heightened disgust. Mortality thoughts did not impact women in either study. These findings uniquely demonstrate that thoughts of death interact with female sex-appeal to influence men's consumer choices, and that disgust mediates these processes. Implications for the role of emotion, and cultural differences, in terror management, for attitudes toward female sexuality, and for marketing strategies are discussed.

  15. Testing Testing Testing.

    Science.gov (United States)

    Deville, Craig; O'Neill, Thomas; Wright, Benjamin D.; Woodcock, Richard W.; Munoz-Sandoval, Ana; Gershon, Richard C.; Bergstrom, Betty

    1998-01-01

    Articles in this special section consider (1) flow in test taking (Craig Deville); (2) testwiseness (Thomas O'Neill); (3) test length (Benjamin Wright); (4) cross-language test equating (Richard W. Woodcock and Ana Munoz-Sandoval); (5) computer-assisted testing and testwiseness (Richard Gershon and Betty Bergstrom); and (6) Web-enhanced testing…

  16. The Making of Sami Ethnography: Contested Authorities and Negotiated Representations

    Directory of Open Access Journals (Sweden)

    Kristin Kuutma

    2011-03-01

    Full Text Available This contribution analyzes the interplay of ethnographic and poetic agendas, the negotiation of synergetic or conflicting objectives in the production and editing of a seminal representation of the Sámi, Muitalus sámiid birra. My main focus is on the collaborative effort of the publication process, to investigate the emergence and negotiation of representational authority, of cultural poetics, of social and cultural critique, in order to defy the preconception of a passive informant of a cultural experience. The Sámi narrator Johan Turi is discussed, instead, as an active agent in providing a voice to the Sámi people in the collaborative process of ethnography writing. My approach is interdisciplinary, being inspired by different inquiries in anthropology and cultural history, while adding a subjective interpretation in discerning the production of a multifaceted ethnographic representation, both by the cultural insider and the inquisitive outsider.

  17. Adapting to the reality of climate change at Glacier National Park, Montana, USA

    Science.gov (United States)

    Fagre, Daniel B.

    2007-01-01

    The glaciers of Glacier National Park (GNP) are disappearing rapidly and likely will be gone by 2030. These alpine glaciers have been continuously present for approximately 7,000 years so their loss from GNP in another 25 years underscores the significance of current climate change. There are presently only 27 glaciers remaining of the 150 estimated to have existed when GNP was created in 1910. Mean annual temperature in GNP has increased 1.6 0 C during the past cen- tury, three times the global mean increase. The temperature increase has affected other parts of the mountain ecosystem, too. Snowpacks hold less water equivalent and melt 2+ weeks earlier in the spring. Forest growth rates have increased, alpine treelines have expanded upward and be- come denser, and subalpine meadows have been invaded by high elevation tree species. These latter responses can be mostly attributed to longer growing seasons and warmer temperatures.

  18. The Catholic of Stilo. Survey and analysis of a Byzantine monument.

    Directory of Open Access Journals (Sweden)

    Marinella Arena

    2015-07-01

    Full Text Available The Cattolica di Stilo, one of the greatest monu-ments of Calabria, is the most important example of the secular Byzantine influence on this region. The Greek cross inscribed in a square, with its five domes, denounces his connection with an archi-tectural style of oriental origin. Although built in a remote province of the Empire, the Catho-lic is not the expression of a poor art; all poetics typical of Byzantine architecture are manifested with originality. The first paragraph, written by Domenico Mediati, analyzes the geometries and correlates with contemporary buildings (X-XI cen-tury and similar in size and shape. The second paragraph, written by Marinella Arena, highlights the differences of construction compared to the theoretical form. The third paragraph, written by Daniele Colistra, reviews some representations of the monument trying to identify those who most influenced the collective imagination.

  19. Promotion of a good safety culture at Ignalina RBMKs; Vnedrenie kul`tury bezopasnosti na Ignalinskoj AEhS

    Energy Technology Data Exchange (ETDEWEB)

    Shevaldin, V [Ignalina NPP, Visaginas (Lithuania)

    1997-12-31

    The presentation discusses the following issues: politics of Ignalina nuclear power plant in the area of safety and quality assurance; check of safety conditions; the activities of the Safety committee at the Ignalina NPP.

  20. Gerakan Potensi Manusia: Injil Harga Diri atau .... ?

    Directory of Open Access Journals (Sweden)

    Robert Sokoy

    2005-04-01

    Full Text Available Gerakan Potensi manusia dalam falsafah New Age merupakan injil hargayang pada akhirnya akan berakhir pada kekosongan spiritual dan citra diri.Manusia telah mati, kata Firman Tuhan. Untuk menemukan identitas, citra diri,dan makna kehidupan tidak ada metode atau pun metodologi lainnya. Bahkansekalipsn secara epistemologi akan muncul metode baru dalam dunia filsafatdan Psikologi atar,r sosiologi yang menawarkan sistem penemuan identitasmanusia, manusia telah mati. Berikanlah berbagai teori psikologi kepada sesosok mayat dan dia tetap menjadi mayat, kecuali dia dihidupkan kembali.Manusia harus dihidupkan kembali dalam hubungan yang dipulihkan bersama Allah penciptanya di dalam dan melalui karya Kristus yang genap danfinal. Di dalam gereja yang secarr sadar atau tak sadar mengajarkan injil harga diri ini di luar Kristus, akan menemukan warganya menjadi turis atau wisatawan spiritual yang akan berkelana dari gereja ke gereja, dari pengkotbah yang satu kepada pengkotbah yang lain untuk mencari kepuasan temporal.

  1. O Terceiro Setor no Turismo: o caso da Câmara de Turismo de Rio Gran-de do Sul (Brasil

    Directory of Open Access Journals (Sweden)

    Luis Gustavo Patrucco

    2011-09-01

    Full Text Available Este artigo resume uma pesquisa descritiva orientada a registrar o surgimento, a consolidação e o aporte da Câmara de Turismo de Rio Grande do Sul ao desenvolvimento do turismo no Estado e os desafios que enfrentou como pioneira das organizações do terceiro setor no turis-mo no Brasil. Trata-se de uma pesquisa documental, que utilizou também procedimentos de história oral e da observação participante e que está fundamentada nas novas teorias sobre o papel do Estado e da iniciativa privada no planejamento e gestão do turismo. Ao mesmo tem-po tem a intenção de estimular a reflexão sobre a importância que organizações do terceiro setor podem ter para o desenvolvimento do turismo em outros estados por ser um modelo am-plamente utilizado por outros países da América Latina.

  2. Voices from the Others:A Study of Larissa Behrendtˊs Home%“他者”之声--评拉丽莎·贝伦特的《家》

    Institute of Scientific and Technical Information of China (English)

    应琼

    2014-01-01

    从后殖民女性主义角度分析澳大利亚土著作家拉里萨·贝伦特的小说《家》，通过剖析遭受种族歧视和性别歧视双重压迫的一家三代土著女性在20世纪一百年来的悲惨遭遇，探讨她们寻回自己的声音、重构自己身份以及再现自我的重要性及其深远意义。%Larissa Behrendtˊs novel Home is studied from the perspective of post-colonial feminism. This paper ex-amines the double oppressions of racism and sexism imposed upon indigenous women in colonial Australia in the 20th cen-tury and discusses the significance of finding their own voice,reconstructing their identity and return their selfhood.

  3. Superfund Record of Decision (EPA Region 2): Ramapo Landfill Site, Rockland County, NY. (First remedial action), March 1992. Final report

    International Nuclear Information System (INIS)

    1992-01-01

    The 60-acre former landfill site is located on a 96-acre tract in the Town of Ramapo, Rockland County, New York, about 35 miles northwest of New York City. Utility corridors lie on three sides of the site, including high-voltage power transmission lines. The site is currently being used as a compaction and transfer facility by the Town of Ramapo. Trash and debris are weighed at a weigh station/guardhouse, compacted at a baler facility in the northeastern corner of the site, and transferred to the Al Turi Landfill in Goshen, New York. The ROD represents the entire remedial action for the site by controlling source of contamination and the generation of leachate, and treatment of contaminated ground water. The primary contaminants of concern affecting soil, ground water, and surface water are VOCs, including benzene; other organics; and metals, including arsenic, chromium, and lead. The selected remedial action for the site is included

  4. Konsep ABG (Academic-Business-Government dalam Rencana Sistem Industri Berbasis Potensi Daerah Kabupaten Sleman dan Gunung Kidul

    Directory of Open Access Journals (Sweden)

    Muhammad Prasanto Bimantio

    2018-01-01

    Full Text Available Daerah Istimewa Yogyakarta (DIY mempunyai potensi industri yang cukup tinggi, baik industri kecil, menengah, maupun besar. Namun daya saing produk industri pengolahan di DIY rendah karena beberapa faktor, yakni masih lemahnya keterkaitan antar industri, keterbatasan produksi barang setengah jadi dan komponen di dalam negeri, keterbatasan industri berteknologi tinggi, kesenjangan kemampuan ekonomi antardaerah, serta ketergantungan ekspor pada beberapa komoditas tertentu. Penelitian ini bertujuan untuk membuat rancangan konsep kawasan industri berbasis potensi daerah (Domestic Based Industry/ DBI menggunakan pendekatan sinergi Academic-Business-Government (ABG. Pendekatan ini dilakukan dengan fokus pada pemanfaatan bahan baku, sumber daya manusia, dan pemenuhan permintaan pasar lokal. Hasil kajian ini menghasilkan tiga konsep kawasan DBI yang diusulkan: (i pengolahan produk turunan salak pondoh di Turi Sleman, (ii pengolahan zeolit di Gedangsari Gunungkidul, dan (iii pengolahan limbah produk biogas di Cangkringan Sleman. Ketiga konsep kawasan industri pengolahan tersebut saling terkait dan akan membentuk jejaring yang terintegrasi mulai dari bahan baku hingga produk, baik dengan industri rancangan baru maupun dengan industri yang sudah ada.

  5. Automating Test Activities: Test Cases Creation, Test Execution, and Test Reporting with Multiple Test Automation Tools

    OpenAIRE

    Loke Mun Sei

    2015-01-01

    Software testing has become a mandatory process in assuring the software product quality. Hence, test management is needed in order to manage the test activities conducted in the software test life cycle. This paper discusses on the challenges faced in the software test life cycle, and how the test processes and test activities, mainly on test cases creation, test execution, and test reporting is being managed and automated using several test automation tools, i.e. Jira, ...

  6. Faster self-paced rate of drinking for alcohol mixed with energy drinks versus alcohol alone.

    Science.gov (United States)

    Marczinski, Cecile A; Fillmore, Mark T; Maloney, Sarah F; Stamates, Amy L

    2017-03-01

    The consumption of alcohol mixed with energy drinks (AmED) has been associated with higher rates of binge drinking and impaired driving when compared with alcohol alone. However, it remains unclear why the risks of use of AmED are heightened compared with alcohol alone even when the doses of alcohol consumed are similar. Therefore, the purpose of this laboratory study was to investigate if the rate of self-paced beverage consumption was faster for a dose of AmED versus alcohol alone using a double-blind, within-subjects, placebo-controlled study design. Participants (n = 16) of equal gender who were social drinkers attended 4 separate test sessions that involved consumption of alcohol (1.97 ml/kg vodka) and energy drinks, alone and in combination. On each test day, the dose assigned was divided into 10 cups. Participants were informed that they would have a 2-h period to consume the 10 drinks. After the self-paced drinking period, participants completed a cued go/no-go reaction time (RT) task and subjective ratings of stimulation and sedation. The results indicated that participants consumed the AmED dose significantly faster (by ∼16 min) than the alcohol dose. For the performance task, participants' mean RTs were slower in the alcohol conditions and faster in the energy-drink conditions. In conclusion, alcohol consumers should be made aware that rapid drinking might occur for AmED beverages, thus heightening alcohol-related safety risks. The fast rate of drinking may be related to the generalized speeding of responses after energy-drink consumption. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  7. Unrecorded alcohol consumption in Russia: toxic denaturants and disinfectants pose additional risks.

    Science.gov (United States)

    Solodun, Yuriy V; Monakhova, Yulia B; Kuballa, Thomas; Samokhvalov, Andriy V; Rehm, Jürgen; Lachenmeier, Dirk W

    2011-12-01

    In 2005, 30% of all alcohol consumption in Russia was unrecorded. This paper describes the chemical composition of unrecorded and low cost alcohol, including a toxicological evaluation. Alcohol products (n=22) from both recorded and unrecorded sources were obtained from three Russian cities (Saratov, Lipetsk and Irkutsk) and were chemically analyzed. Unrecorded alcohols included homemade samogons, medicinal alcohols and surrogate alcohols. Analysis included alcoholic strength, levels of volatile compounds (methanol, acetaldehyde, higher alcohols), ethyl carbamate, diethyl phthalate (DEP) and polyhexamethyleneguanidine hydrochloride (PHMG). Single samples showed contamination with DEP (275-1269 mg/l) and PHMG (515 mg/l) above levels of toxicological concern. Our detailed chemical analysis of Russian alcohols showed that the composition of vodka, samogon and medicinal alcohols generally did not raise major public health concerns other than for ethanol. It was shown, however, that concentration levels of DEP and PHMG in some surrogate alcohols make these samples unfit for human consumption as even moderate drinking would exceed acceptable daily intakes.

  8. A bad back needs help

    Directory of Open Access Journals (Sweden)

    Gotway MB

    2011-08-01

    Full Text Available No abstract available. Article truncated at 150 words. Case Presentation History of Present Illness A 61-year-old man was admitted to the hospital with a 2 month complaint of atraumatic back pain, worsening over the previous two weeks. The patient described his pain as sharp, 10/10 in intensity, radiating to his ribs, right hip, and right groin, and aggravated by coughing, weight lifting, and movement. His pain was worse in the supine and prone positions, with some relief provided by sitting, and relieved with high doses of pain medications, topical lidocaine, menthol-containing skin ointments, and chiropractic adjustments. Over the 2 days prior to admission, the patient became increasingly desperate as a result of his pain, and drank several pints of vodka.Past Medical and Social HistoryThe patient is a retired machinist whose medical history includes fibromyalgia and binge drinking. He smokes three-quarters of a pack of cigarettes per day.Physical ExaminationPhysical examination showed normal vital signs and …

  9. The composition of surrogate and illegal alcohol products in Estonia.

    Science.gov (United States)

    Lang, Katrin; Väli, Marika; Szucs, Sándor; Adány, Róza; McKee, Martin

    2006-01-01

    To identify the composition of illegal and surrogate alcohol products consumed in Estonia. The initial source of information was a series of visits made in August 2005 to a soup kitchen in central Tartu, Estonia. Individuals were asked for brief details of their personal circumstances, what they normally drank, and in addition they were asked to bring samples of the substances they usually consumed. In other cases, the substances identified were purchased by the investigators or from informal contacts in north-eastern part of Estonia, an area that is well known for illegal alcohol consumption. Samples were tested for chemical contents. We identified a range of alcohol-containing substances that are consumed, although, not intended for consumption. These comprised medicinal products, aftershaves, illegally produced spirits, and fire-lighting fuel. The medicinal compounds contained, on average, 67% ethanol by volume; the aftershaves contained slightly less. Both were typically pure, with a few containing detectable quantities of isoamyl alcohol. The illegally produced alcohol contained, on average, 43% ethanol by volume, ranging from 32 to 53%. However, many also contained detectable quantities of long chain alcohols. These substances are half the price or less of commercial vodka, with fire lighting fuels especially inexpensive. There is in Estonia a range of alcohol-containing substances easily available at low cost. Some contain substantially higher concentrations of ethanol than commercial spirits and others also contain toxic long chain alcohols.

  10. Safety culture in an RBMK perspective; Sostoyanie i perspektivy razvitiya sistemy povysheniya kul`tury bezopasnosti AEhS Rossii

    Energy Technology Data Exchange (ETDEWEB)

    Porokhin, V G [Rosenergoatom, Moscow (Russian Federation)

    1997-12-31

    The presentation discusses the following issues: state and perspectives of the development of the system on Russia NPP safety culture enhancement; steps of Rosehnergoatom on development of system on Russia NPP Russia NPP safety culture enhancement, qualitative and quantitative evaluation of the safety culture, the nearest perspectives on safety culture enhancement in Russia.

  11. K izučeniju kul'tury s keramikoj pražskogo tipa na territorii Moravii: formirovanije i osobennosti

    Czech Academy of Sciences Publication Activity Database

    Jelínková, Dagmar

    -, č. 5 (2015), s. 117-150 ISSN 1608-9057 Institutional support: RVO:68081758 Keywords : Prague-type pottery culture * Moravia * dating * Cultural relations to the east and South-East * Influence of the Merovingian sphere Subject RIV: AC - Archeology, Anthropology, Ethnology

  12. FORMELE DE TURISM PRACTICATE ÎN CADRUL TURISMULUI NOMAD

    Directory of Open Access Journals (Sweden)

    Ina CAVCALIUC

    2015-12-01

    Full Text Available La nivel mondial există multe forme turistice, aferente turismului nomad, dezvoltate independent sau complementar care promovează toleranţa şi înţelegerea turistică. Aceste forme apar ca rezultat al individualizării serviciilor turistice, determinate atât de motivaţiile, cât şi de comportamentul diferit al turiştilor faţă de fiecare component al produsului turistic oferit. O asemenea individualizare devine tot mai obiectivă, reclamând eforturi considerabile de adaptare a ofertei turistice la cererea actuală şi la cea potenţială. FORMS OF TOURISM IN THE NOMAD TOURISMThere are many forms of tourism related to grey nomad tourism, developed independently or complementary, in order to promote tourism tolerance and understanding. These forms appear as a result of personalization of tourism services, determined by different motivations and tourist behavior to each element of tourism product. Such individualization of tourism products is becoming more objective in order to adjust efforts of tourism supply to the potential demand. 

  13. Turisterne, naturen og nationalparken

    DEFF Research Database (Denmark)

    Kvistgaard, Peter; Smed, Karina Madsen; Møn, Team

    Møn er en turist-ø, og øens feriegæster udgør en vigtig del af naturbrugerne – såvel kvantitativt som kvalitativt. Med ca. 500.000 overnatninger pr. år er øens indbyggertal godt og vel fordoblet på et givet tidspunkt i højsæsonen, som falder sammen med den tid af året, hvor naturområderne generelt...... benyttes mest. Møns turister vælger i høj grad Møn på grund af naturen og bruger den meget. Der er stort behov for at udvikle nye oplevelsesmuligheder i den mønske natur, for at gøre dem tilgængeli-ge og informere om dem. Samtidig indebærer den store turisme selvfølgelig - selv om mange turi-ster har et......? Målgruppe er Møns turister – udvalg af interview-personer søges sammensat på nationaliteter, fami-lietyper, overnatningstyper m.v. i overensstemmelse med fordelingen i hele turistgruppen....

  14. NMR investigation of acrolein stability in hydroalcoholic solution as a foundation for the valid HS-SPME/GC–MS quantification of the unsaturated aldehyde in beverages

    International Nuclear Information System (INIS)

    Kächele, Martin; Monakhova, Yulia B.; Kuballa, Thomas; Lachenmeier, Dirk W.

    2014-01-01

    Highlights: • Acrolein in hydroalcoholic solution degrades to 1,3,3-propanetriol and 3-hydroxypropionaldehyde. • Hydroquinone (0.2%) at pH 3.0 stabilizes acrolein solutions. • Quantitative HS-SPME/GC–MS determination of acrolein in alcoholic beverages was developed (LOD 14 μg L −1 ). • 6 of 117 samples had acrolein levels above the WHO threshold (1500 μg L −1 ). - Abstract: Acrolein (propenal) is found in many foods and beverages and may pose a health hazard due to its cytotoxicity. Considerable knowledge gaps regarding human exposure to acrolein exist, and there is a lack of reliable analytical methods. Hydroalcoholic dilutions prepared for calibration purposes from pure acrolein show considerable degradation of the compound and nuclear magnetic resonance (NMR) spectroscopy showed that 1,3,3-propanetriol and 3-hydroxypropionaldehyde are formed. The degradation can be prevented by addition of hydroquinone as stabilizer to the calibration solutions, which then show linear concentration-response behaviour required for quantitative analysis. The stabilized calibration solutions were used for quantitative headspace solid-phase microextraction/gas chromatography–mass spectrometry (HS-SPME/GC–MS) determination of acrolein in alcoholic beverages with a detection limit of 14 μg L −1 . Of 117 tested alcoholic beverages, 64 were tested positive with the highest incidence in grape marc spirits and whiskey (100%, mean 252 μg L −1 ), followed by fruit spirits (86%, mean 591 μg/L −1 ), tequila (86%, mean 404 μg L −1 ), Asian spirits (43%, mean 54 μg L −1 ) and wine (9%, mean 0.7 μg L −1 ). Acrolein could not be detected in beer, vodka, absinthe and bottled water. Six of the fruit and grape marc spirits had acrolein levels above the World Health Organization (WHO) provisional tolerable concentration of 1.5 mg L −1

  15. NMR investigation of acrolein stability in hydroalcoholic solution as a foundation for the valid HS-SPME/GC–MS quantification of the unsaturated aldehyde in beverages

    Energy Technology Data Exchange (ETDEWEB)

    Kächele, Martin [Chemisches und Veterinäruntersuchungsamt (CVUA) Karlsruhe, Weissenburger Strasse 3, D-76187 Karlsruhe (Germany); Hochschule Mannheim, Paul-Wittsack-Strasse 10, D-68163 Mannheim (Germany); Monakhova, Yulia B. [Chemisches und Veterinäruntersuchungsamt (CVUA) Karlsruhe, Weissenburger Strasse 3, D-76187 Karlsruhe (Germany); Bruker Biospin GmbH, Silbersteifen, 76287 Rheinstetten (Germany); Department of Chemistry, Saratov State University, Astrakhanskaya Street 83, 410012 Saratov (Russian Federation); Kuballa, Thomas [Chemisches und Veterinäruntersuchungsamt (CVUA) Karlsruhe, Weissenburger Strasse 3, D-76187 Karlsruhe (Germany); Lachenmeier, Dirk W., E-mail: lachenmeier@web.de [Chemisches und Veterinäruntersuchungsamt (CVUA) Karlsruhe, Weissenburger Strasse 3, D-76187 Karlsruhe (Germany); Ministry of Rural Affairs and Consumer Protection, Kernerplatz 10, 70182 Stuttgart (Germany)

    2014-04-01

    Highlights: • Acrolein in hydroalcoholic solution degrades to 1,3,3-propanetriol and 3-hydroxypropionaldehyde. • Hydroquinone (0.2%) at pH 3.0 stabilizes acrolein solutions. • Quantitative HS-SPME/GC–MS determination of acrolein in alcoholic beverages was developed (LOD 14 μg L⁻¹. • 6 of 117 samples had acrolein levels above the WHO threshold (1500 μg L⁻¹). Abstract: Acrolein (propenal) is found in many foods and beverages and may pose a health hazard due to its cytotoxicity. Considerable knowledge gaps regarding human exposure to acrolein exist, and there is a lack of reliable analytical methods. Hydroalcoholic dilutions prepared for calibration purposes from pure acrolein show considerable degradation of the compound and nuclear magnetic resonance (NMR) spectroscopy showed that 1,3,3-propanetriol and 3-hydroxypropionaldehyde are formed. The degradation can be prevented by addition of hydroquinone as stabilizer to the calibration solutions, which then show linear concentration-response behaviour required for quantitative analysis. The stabilized calibration solutions were used for quantitative headspace solid-phase microextraction/gas chromatography–mass spectrometry (HS-SPME/GC–MS) determination of acrolein in alcoholic beverages with a detection limit of 14 μg L⁻¹. Of 117 tested alcoholic beverages, 64 were tested positive with the highest incidence in grape marc spirits and whiskey (100%, mean 252 μg L⁻¹), followed by fruit spirits (86%, mean 591 μg/L⁻¹), tequila (86%, mean 404 μg L⁻¹), Asian spirits (43%, mean 54 μg L⁻¹) and wine (9%, mean 0.7 μg L⁻¹). Acrolein could not be detected in beer, vodka, absinthe and bottled water. Six of the fruit and grape marc spirits had acrolein levels above the World Health Organization (WHO) provisional tolerable concentration of 1.5 mg L⁻¹.

  16. Test Review: TestDaF

    Science.gov (United States)

    Norris, John; Drackert, Anastasia

    2018-01-01

    The Test of German as a Foreign Language (TestDaF) plays a critical role as a standardized test of German language proficiency. Developed and administered by the Society for Academic Study Preparation and Test Development (g.a.s.t.), TestDaF was launched in 2001 and has experienced persistent annual growth, with more than 44,000 test takers in…

  17. Dampak Erupsi Merapi 2010 terhadap Serangga Penyerbuk Bunga Salak

    Directory of Open Access Journals (Sweden)

    F. X. Wagiman

    2014-07-01

    Full Text Available The research was aimed at determining the impact of Merapi eruption in 2010 on pollinator insect of Salacca edulis. The research was conducted at Keringan hamlet, Wonokerto village, Turi District, Sleman Regency, Yogyakarta Special Territory. Species and population of the insect were observed at salacca plantation that were damaged by Merapi eruption in 2010 in the following category: heavy damage, medium damage, light damage, and undamaged. Five respondents and 10 salacca plants/respondent were sampled for each of the damage category. Respondents were interviewed to understand their perception on the eruption impact against the pollinator insect. Results showed that the pollinator insect was Nodocnemis sp. The insect population was significantly influenced by the eruption. Population average on the damage category of heavy, medium, light, and undamaged were 8.59, 17.33, 31.35, and 61.10 individuals/flower, respectively. The insect population was also significantly influenced by the flower development, the highest population was observed on blooming stage (92.33 individuals/flower, while on stage of pre-and post blooming were 17.37 and 8.14 individuals/flower, respectively. The farmer respondents understood about the role of pollinator insect. They thought that the Merapi eruption influenced negatively to the pollinator insect.   Penelitian ini bertujuan untuk mengetahui dampak erupsi Merapi terhadap serangga penyerbuk bunga salak (Salacca edulis. Penelitian dilakukan di kebun salak di Dusun Keringan, Desa Wonokerto, Kecamatan Turi, Kabupaten Sleman, Provinsi Daerah Istimewa Yogyakarta, selama bulan Maret−Mei 2011. Jenis dan populasi serangga penyerbuk diamati in situ pada bunga salak yang belum mekar, mekar, dan lewat mekar. Bunga salak diamati di kebun salak yang rusak akibat erupsi Merapi 2010 berdasarkan kategori rusak berat, rusak sedang, rusak ringan, dan tidak rusak. Pada setiap kategori kerusakan kebun diambil sampel 5 (lima petani

  18. UPTF test 21D counterpart test in the MIDAS test facility

    International Nuclear Information System (INIS)

    Yoon, B. C.; Ah, D. J.; Joo, I. C.; Kwon, T. S.; Park, W. M.; Song, C. H.

    2002-01-01

    This paper describes the experimental results of UPTF Test 21D counterpart tests in the downcomer during the late reflood phase of LBLOCA. The experiments have been performed in the MIDAS test facility using superheated steam and water. The test condition was determined,based on the test results of UPTF Test 21D, by applying the 'modified linear scaling method of 1/4.077 length scale. The tests of ECC direct bypass and void height are performed separately to estimate each phenomena quantitatively. The tests were carried out by varying the injection steam flow rate of intact cold legs widely to investigate the effect of steam flow rate on the direct bypass fraction and void height. In the tests, separate effect tests have been performed in cases of DVI-1,DVI- 2 and DVI-1 and 2 injections to see the direct bypass fraction according to the DVI nozzle combination. From the tests, we found that the fraction of direct ECC bypass and the void height observed in the MIDAS test facility reasonably well agree with those of UPTF test 21- D. It confirms that the applied 'modified linear scaling law' reproduces major thermal hydraulics phenomena in the downcomer during the LBLOCA reflood phase

  19. Test report: Electron-proton spectrometer qualification test unit, qualification test

    Science.gov (United States)

    Vincent, D. L.

    1972-01-01

    Qualification tests of the electron-proton spectrometer test unit are presented. The tests conducted were: (1) functional, (2) thermal/vacuum, (3) electromagnetic interference, (4) acoustic, (5) shock, (6) vibration, and (7) humidity. Results of each type of test are presented in the form of data sheets.

  20. Computer-Based Testing: Test Site Security.

    Science.gov (United States)

    Rosen, Gerald A.

    Computer-based testing places great burdens on all involved parties to ensure test security. A task analysis of test site security might identify the areas of protecting the test, protecting the data, and protecting the environment as essential issues in test security. Protecting the test involves transmission of the examinations, identifying the…

  1. Youth Exposure to Alcohol Advertising in National Magazines in the United States, 2001-2011.

    Science.gov (United States)

    Ross, Craig S; Henehan, Elizabeth R; Jernigan, David H

    2017-01-01

    To update public health surveillance of alcohol advertising to underage populations by assessing alcohol industry compliance with their voluntary guidelines for US magazine advertisements from 2001 to 2011. Using advertising industry standard sources The Nielsen Company and MediaMark, we evaluated youth exposure to alcohol advertising, and relative advertising exposure of youths versus adults, in 168 national magazines. From 2001 to 2011, magazine alcohol advertising seen by youths declined by 62.9%, from 5.4 billion impressions (single person seeing a single advertisement) to 2.0 billion impressions. Most alcohol advertising (65.1% of ads) was for spirits (e.g., vodka, whiskey). Since 2008, alcohol companies achieved 100% compliance with their limited guidelines. However, youths were overexposed to magazine advertising relative to adults on average 73% of the time. Despite improving compliance with placement guidelines in national editions of the 168 measured magazines, most youth exposure to magazine alcohol advertising exceeded adult exposure, per capita. If alcohol companies adopted stricter guidelines based on public health risk assessments, youths would not be overexposed to alcohol advertising in magazines.

  2. Electrochemical determination of copper ions in spirit drinks using carbon paste electrode modified with biochar.

    Science.gov (United States)

    Oliveira, Paulo Roberto; Lamy-Mendes, Alyne C; Rezende, Edivaltrys Inayve Pissinati; Mangrich, Antonio Sálvio; Marcolino, Luiz Humberto; Bergamini, Márcio F

    2015-03-15

    This work describes for first time the use of biochar as electrode modifier in combination with differential pulse adsorptive stripping voltammetric (DPAdSV) techniques for preconcentration and determination of copper (II) ions in spirit drinks samples (Cachaça, Vodka, Gin and Tequila). Using the best set of the experimental conditions a linear response for copper ions in the concentration range of 1.5 × 10(-6) to 3.1 × 10(-5) mol L(-1) with a Limit of Detection (LOD) of 4.0 × 10(-7) mol L(-1). The repeatability of the proposed sensor using the same electrode surface was measured as 3.6% and 6.6% using different electrodes. The effect of foreign species on the voltammetric response was also evaluated. Determination of copper ions content in different samples of spirit drinks samples was also realized adopting inductively coupled plasma optical emission spectroscopy (ICP-OES) and the results achieved are in agreement at a 95% of confidence level. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. The relation of age to the acute effects of ethanol on acetanilide disposition.

    Science.gov (United States)

    Wynne, H A; Mutch, E; Williams, F M; James, O F; Rawlins, M D; Woodhouse, K W

    1989-03-01

    The activity of the major drug-metabolizing enzymes, the mono-oxygenases, can be inhibited by an acute dose of ethanol. We set out to determine whether age has any relation to the degree of inhibition produced by ethanol, using acetanilide as a model substrate. Eight healthy young subjects (mean age 26 years) and eight healthy elderly subjects (mean age 72 years) were studied on two occasions, once receiving acetanilide alone and once acetanilide with 75 ml vodka (30 g ethanol). The clearance of acetanilide was significantly lower (p less than 0.05) in the elderly subjects at 27 +/- 3 l/h compared to 38 +/- 2 l/h in young subjects. No age-related differences in peak blood ethanol concentrations or ethanol elimination rates were noted. After ethanol, acetanilide clearance fell 18% to 31 +/- 3 l/h in young subjects (p = 0.05) and by 15% to 23 +/- 2 l/h in elderly subjects (p = 0.08). This suggests that the elderly do not suffer greater impairment of drug oxidation after acute ethanol ingestion than do the young.

  4. Golden Jubilee photos: The Proton Synchrotron

    CERN Multimedia

    2004-01-01

    Energy record Standing before the CERN personnel in the Main Auditorium on 25 November 1959, John Adams held not a bottle of champagne but a bottle of vodka. It had been presented to him a few months earlier during a visit to Dubna in the Soviet Union, where the world's most powerful accelerator had just been commissioned. He had been given strict instructions not to open the bottle until Dubna's energy record of 10 GeV had been broken. On 24 November, the record was smashed by CERN's brand new machine, the Proton Synchrotron, which accelerated protons at 24 GeV, over twice the energy of the Dubna machine. Before sending the empty bottle back to the Soviet Union, John Adams, who had headed the accelerator's construction, placed the recording of the signal in it as proof of the record. More than 40 years later, the PS is still going strong, delivering beams with particle densities a thousand times greater than when it first started operation. Over the years, other accelerators have grown up around it and the...

  5. Testing Practices and Attitudes Toward Tests and Testing: An International Survey

    Czech Academy of Sciences Publication Activity Database

    Evers, A.; McCormick, C. M.; Hawley, L. R.; Muñiz, J.; Balboni, G.; Bartram, D.; Boben, D.; Egeland, J.; El-Hassan, K.; Fernández-Hermida, J.R.; Fine, S.; Frans, Ö.; Gintiliéne, G.; Hagemeister, C.; Halama, P.; Iliescu, D.; Jaworowska, A.; Jiménez, P.; Manthouili, M.; Matesic, K.; Michaelsen, L.; Mogaji, A.; Morley-Kirk, J.; Rózsa, S.; Rowlands, L.; Schittekatte, M.; Sümer, H.C.; Suwartono, T.; Urbánek, Tomáš; Wechsler, S.; Zelenevska, T.; Zanev, S.; Zhang, J.

    2017-01-01

    Roč. 17, č. 2 (2017), s. 158-190 ISSN 1530-5058 Institutional support: RVO:68081740 Keywords : psychological testing * testing practices * test use * International Test Commission * European Federation of Psychologists' Associations Subject RIV: AN - Psychology OBOR OECD: Psychology (including human - machine relations)

  6. Learning software testing with Test Studio

    CERN Document Server

    Madi, Rawane

    2013-01-01

    Learning Software Testing with Test Studio is a practical, hands-on guide that will help you get started with Test Studio to design your automated solution and tests. All through the book, there are best practices and tips and tricks inside Test Studio which can be employed to improve your solution just like an experienced QA.If you are a beginner or a professional QA who is seeking a fast, clear, and direct to the point start in automated software testing inside Test Studio, this book is for you. You should be familiar with the .NET framework, mainly Visual Studio, C#, and SQL, as the book's

  7. Energy Systems Test Area (ESTA) Battery Test Operations User Test Planning Guide

    Science.gov (United States)

    Salinas, Michael

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ESTA Battery Test Operations. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  8. Open test assembly (OTA) shear demonstration testing work/test plan

    International Nuclear Information System (INIS)

    Hiller, S.W.

    1998-01-01

    This document describes the development testing phase associated with the OTA Shear activity and defines the controls to be in place throughout the testing. The purpose of the OTA Shear Program was to provide equipment that is needed for the processing of 40 foot long, sodium wetted, irradiated core components previously used in the FFTF reactor to monitor fuel and materials tests. There are currently 15 of these OTA test stalks located in the Test Assembly Conditioning Station (TACS) inerted vault. These need to be dispositioned for a shutdown mission to eliminate this highly activated, high dose inventory prior to turnover to the ERC since they must be handled by remote operations. These would also need to be dispositioned for a restart mission to free up the vault they currently reside in. The waste handling and cleaning equipment in the J33M Cell was designed and built for the handling of reactor components up to the standard 12 foot length. This program will provide the equipment to the IEM Cell to remotely section the OTAS into pieces less than 12 feet in length to allow for the necessary handling and cleaning operations required for proper disposition. Due to the complexity of all operations associated with remote handling, the availability of the IEM Cell training facility, and the major difficulty with reworking contaminated equipment, it was determined that preliminary testing of the equipment was desirable, This testing activity would provide the added assurance that the equipment will operate as designed prior to performance of the formal Acceptance Test Procedure (ATP) at the IEM Cell, This testing activity will also allow for some operator familiarity and procedure checkout prior to actual installation into the IEM Cell. This development testing will therefore be performed at the conclusion of equipment fabrication and prior to transfer of the equipment to the 400 Area

  9. Underground Nuclear Testing Program, Nevada Test Site

    International Nuclear Information System (INIS)

    1975-09-01

    The Energy Research and Development Administration (ERDA) continues to conduct an underground nuclear testing program which includes tests for nuclear weapons development and other tests for development of nuclear explosives and methods for their application for peaceful uses. ERDA also continues to provide nuclear explosive and test site support for nuclear effects tests sponsored by the Department of Defense. This Supplement extends the Environmental Statement (WASH-1526) to cover all underground nuclear tests and preparations for tests of one megaton (1 MT) or less at the Nevada Test Site (NTS) during Fiscal Year 1976. The test activities covered include numerous continuing programs, both nuclear and non-nuclear, which can best be conducted in a remote area. However, if nuclear excavation tests or tests of yields above 1 MT or tests away from NTS should be planned, these will be covered by separate environmental statements

  10. To test or not to test

    DEFF Research Database (Denmark)

    Rochon, Justine; Gondan, Matthias; Kieser, Meinhard

    2012-01-01

    Background: Student's two-sample t test is generally used for comparing the means of two independent samples, for example, two treatment arms. Under the null hypothesis, the t test assumes that the two samples arise from the same normally distributed population with unknown variance. Adequate...... control of the Type I error requires that the normality assumption holds, which is often examined by means of a preliminary Shapiro-Wilk test. The following two-stage procedure is widely accepted: If the preliminary test for normality is not significant, the t test is used; if the preliminary test rejects...... the null hypothesis of normality, a nonparametric test is applied in the main analysis. Methods: Equally sized samples were drawn from exponential, uniform, and normal distributions. The two-sample t test was conducted if either both samples (Strategy I) or the collapsed set of residuals from both samples...

  11. Tests in Print II: An Index to Tests, Test Reviews, and the Literature on Specific Tests.

    Science.gov (United States)

    Buros, Oscar K., Ed.

    Tests in Print II is a comprehensive, annotated bibliography of all in-print tests published as separates for use with English-speaking subjects. The 1,155 two-column pages list 2,467 tests in print as of early 1974; 16,574 references through 1971 on specific tests; a reprinting of the 1974 APA-AERA-NCME Standards for Educational andPsychological…

  12. Monitoramento da autenticidade de amostras de bebidas alcoólicas enviadas ao Instituto Adolfo Lutz em São Paulo Evaluation of authenticity of alcoholic beverage samples examined by the Instituto Adolfo Lutz (São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Leticia Araujo Farah NAGATO

    2001-01-01

    Full Text Available Este trabalho teve como objetivo verificar a autenticidade de bebidas alcoólicas (whisky, vodka, conhaque de gengibre, etc. enviadas para análise ao Instituto Adolfo Lutz no período de 1993 a agosto de 1999. Devido à presença no mercado nacional de bebidas alcoólicas clandestinas, principalmente aquelas com alto valor agregado, foi realizado o monitoramento através da análise de composição química destas bebidas. Normalmente estes produtos são elaborados com álcool, água, aroma e corante caramelo e que por falta de controle dessas matérias-primas, podem oferecer risco potencial à saúde humana pela presença de metanol. A técnica empregada na análise dos componentes secundários e metanol das amostras foi realizada através da cromatografia em fase gasosa com detector de ionização de chama. Observou-se que em 608 amostras de bebidas alcoólicas analisadas, 391 eram falsificadas e dentre estas 2 apresentaram teores de metanol acima do limite tolerado (200mg/100mL de álcool anidro pela legislação em vigor. Os resultados obtidos sugerem uma grande persistência em se produzir bebidas alcoólicas falsificadas. Desta forma, é muito importante estar sempre monitorando estes produtos e identificando os diferentes tipos de falsificações existentes no país.This work aimed at verifying the authenticity of alcoholic beverages (whisky, vodka, ginger spirit, etc. sent for analysis by the Instituto Adolfo Lutz, São Paulo from 1993 to August 1999. The chemical composition of these drinks was studied because of the presence of illicit alcoholic beverages on the national market, especially those with a high commercial value. These products are usually elaborated with alcohol, water, flavor and caramel coloring. Since there is no control over these raw materials, these drinks could offer a potential risk to human health because of the presence of methanol. The method employed in the analysis of congeners and methanol in alcoholic

  13. Tractor accelerated test on test rig

    Directory of Open Access Journals (Sweden)

    M. Mattetti

    2013-09-01

    Full Text Available The experimental tests performed to validate a tractor prototype before its production, need a substantial financial and time commitment. The tests could be reduced using accelerated tests able to reproduce on the structural part of the tractor, the same damage produced on the tractor during real life in a reduced time. These tests were usually performed reproducing a particular harsh condition a defined number of times, as for example using a bumpy road on track to carry out the test in any weather condition. Using these procedures the loads applied on the tractor structure are different with respect to those obtained during the real use, with the risk to apply loads hard to find in reality. Recently it has been demonstrated how, using the methodologies designed for cars, it is possible to also expedite the structural tests for tractors. In particular, automotive proving grounds were recently successfully used with tractors to perform accelerated structural tests able to reproduce the real use of the machine with an acceleration factor higher than that obtained with the traditional methods. However, the acceleration factor obtained with a tractor on proving grounds is in any case reduced due to the reduced speed of the tractors with respect to cars. In this context, the goal of the paper is to show the development of a methodology to perform an accelerated structural test on a medium power tractor using a 4 post test rig. In particular, several proving ground testing conditions have been performed to measure the loads on the tractor. The loads obtained were then edited to remove the not damaging portion of signals, and finally the loads obtained were reproduced in a 4 post test rig. The methodology proposed could be a valid alternative to the use of a proving ground to reproduce accelerated structural tests on tractors.

  14. Formal Functional Test Designs: Bridging the Gap Between Test Requirements and Test Specifications

    Science.gov (United States)

    Hops, Jonathan

    1993-01-01

    This presentation describes the testing life cycle, the purpose of the test design phase, and test design methods and gives an example application. Also included is a description of Test Representation Language (TRL), a summary of the language, and an example of an application of TRL. A sample test requirement and sample test design are included.

  15. CANFLEX fuel bundle strength tests (test report)

    International Nuclear Information System (INIS)

    Chang, Seok Kyu; Chung, C. H.; Kim, B. D.

    1997-08-01

    This document outlines the test results for the strength tests of the CANFLEX fuel bundle. Strength tests are performed to determine and verify the amount of the bundle shape distortion which is against the side-stops when the bundles are refuelling. There are two cases of strength test; one is the double side-stop test which simulates the normal bundle refuelling and the other is the single side-stop test which simulates the abnormal refuelling. the strength test specification requires that the fuel bundle against the side-stop(s) simulators for this test were fabricated and the flow rates were controlled to provide the required conservative hydraulic forces. The test rig conditions of 120 deg C, 11.2 MPa were retained for 15 minutes after the flow rate was controlled during the test in two cases, respectively. The bundle loading angles of number 13- number 15 among the 15 bundles were 67.5 deg CCW and others were loaded randomly. After the tests, the bundle shapes against the side-stops were measured and inspected carefully. The important test procedures and measurements were discussed as follows. (author). 5 refs., 22 tabs., 5 figs

  16. Design Driven Testing Test Smarter, Not Harder

    CERN Document Server

    Stephens, M

    2010-01-01

    The groundbreaking book Design Driven Testing brings sanity back to the software development process by flipping around the concept of Test Driven Development (TDD) - restoring the concept of using testing to verify a design instead of pretending that unit tests are a replacement for design. Anyone who feels that TDD is "Too Damn Difficult" will appreciate this book. Design Driven Testing shows that, by combining a forward-thinking development process with cutting-edge automation, testing can be a finely targeted, business-driven, rewarding effort. In other words, you'll learn how to test

  17. Peran Orang Tua dan Sumber Informasi dalam Pendidikan Seks dengan Perilaku Seksual Remaja pada Masa Pubertas di SMAN 1 Turi

    OpenAIRE

    Sujarwati Sujarwati; Anafrin Yugistyowati; Kayat Haryani

    2014-01-01

    Adolescent is transition period or transition from childhood to adulthood. Based on the baseline study, showed that from 268 students about 66 (60%) male students said that they ever doing masturbation and 5 (1.75%) students who take counseling had ever sexual intercourse and in the academic year 2012/2013 there was 1 (0.35%) student was pregnant before marriage. The purpose of this research was to observe role of parents and information resources relationship in sex education with sexual beh...

  18. Racial Metabolism: Eugenic Studies in Jamaica and Yucatán, between 1920 and 1940

    Directory of Open Access Journals (Sweden)

    Joel Vargas Domínguez

    2015-10-01

    Full Text Available Objective: this paper shows the configuration of research conducted by the Carnegie Institution of Washington (CIW, in Jamaica and Yucatan, about basal metabolism on the onset of the twen­tieth century. I argue that this physiological research, conducted outside the usual laboratory spaces, used and articulated eugenics and racialized notions about the bodies under examination.Content: from the standpoint of the history of science I have analyzed the publications, reports and correspondence of the members of the Carnegie Institution expeditions. Conclusions: I show that basal metabolism was a measure constructed and used in the first half of the twentieth cen­tury with a strong eugenic and racial bias. Francis G. Benedict, Charles B. Davenport and Morris Steggerda from the CIW conducted these expeditions not only from the medical but also from the anthropological standpoint, in order to answer the question whether there was a climatic or racial effect on the body of the subjects analyzed. The results of the research were incorporated to the formulas used to evaluate the nutritional status of populations, fact that might have con­sequences nowadays on the way we understand metabolic “normality”.

  19. Photography Reframed

    Directory of Open Access Journals (Sweden)

    Anna Dahlgren

    2016-04-01

    Full Text Available This article discusses the benefits of analysing photography as mediated, repro-duced and entangled in media systems, and consequently as part of a larger media culture. Moreover it combines technological considerations drawn from media ar-chaeology with art historical analysis focusing on visual aesthetics. It considers two mediating devices for photography in the nineteenth century, the photo album and the illustrated press. As displayed, a media historical perspective airs new interpre-tations and understandings of processes and practices in relation to photography in the period. Thus what from a photo historical point of view might appear as an important, paradigmatic invention or a critical technical delimitation might from a media historical perspective seem to have been merely a small adjustment in a chain of gradual improvements and experiments in the dissemination and consumption of images. Thus photographic media specificity delimited by technical procedures and certain materials outputs, which was so strongly emphasized in the twentieth cen-tury, was evidently not fixed to materiality and rather opened and negotiated in the nineteenth century. Accordingly, responsiveness to the literal and figurative fram-ing of photography as mediated, discloses other photo histories.

  20. DISASTER REGIME CHARACTER: A STUDY OF DISASTER RISK REDUCTION AT MERAPI VOLCANO ERUPTION IN SLEMAN DISTRICT

    Directory of Open Access Journals (Sweden)

    Nurlia Dian Paramita

    2012-08-01

    Full Text Available This research analyses how the existence of the character occurred in one of disaster management phases which is an emergency response. In addition, it aims to discuss and see the relationship between authority institutions in the disaster management which are Kesbanglinmas & PB Kab. Sleman, Muhammadiyah Disaster Management Centre (MDMC, and Merapi Circle Information Network (JALIN MERAPI. This research uses qualitative method. The data about the policy and survivor handling are got through interviews with representatives from Pakem, Turi, and Cangkringan. They are head of sub districts, head of villages, and head of country-sides. The findings of this research show that the disaster regime character is fatalist-individualist and the authority relation is substitution (acts as a substitute. Therefore, humanity-based point of view is important to see the risk. It will empower the capacity of government institutions. The last, involving civil society (CSO is also significant to streamline the role of disaster management regime guide. Therefore, the synergy between government and CSO will easily be achieved to implement Community-Based Disaster Risk Management (CBDRM. CSO is the government’s partner to reduce disaster.

  1. Production of ready to drink red and rosé wines from new seedless grapevine crossbreeds

    Directory of Open Access Journals (Sweden)

    Antonacci Donato

    2017-01-01

    Full Text Available Monomeric and polymeric flavan-3-ols (proanthocyanidins content in grapes is higher in seeds compared to berry skins. Monomeric flavan-3-ols are more astringent, however, they can combine with other monomer, with anthocyanins and with mannoproteins released by yeast and therefore lose their harsh features in wines. Proanthocyanidins extracted during fermentation and maceration processes in red wines, are important for the organoleptic characteristics of the product and for its aging. There is a difference between skins and seeds proanthocyanidins, with the latter being perceived as more harsh and astringent. One of the most important purposes of refinement and aging of red wines very rich in polyphenols is the slow loss of bitterness. Instead, for wines ready to drink seeds tannins can give bitter overtones, therefore reducing their quality since consumers generally prefer a reduced astringency and attenuated bitterness. This paper investigates the possibility of employ some new seedless grapes crossings of Vitis vinifera L., obtained in recent breeding programs carried out at the CREA-VE of Turi, for the production of improved red and rosé wines made with traditionally red winemaking.

  2. Investigación, Planificación y Estudio del Potencial Turístico del Parque Nacional Bernardo O’Higgins, Patagonia Chilena.

    Directory of Open Access Journals (Sweden)

    Germaynee Vela-Ruiz Figueroa

    2013-01-01

    Full Text Available El Parque Nacional Bernardo O’Higgins (PNBO, ubicado en el extremo austral de Chile, protege 3,5 millones de hectáreas caracterizadas por una geomorfología de fiordos, archipiélagos, islas y glaciares del Campo de Hielo Sur. Este Parque Nacional resalta además por ser el territorio ancestral de los últimos habitantes que mantienen la lengua y el acervo cultural del pueblo indígena Kawésqar. El presente artículo muestra el proceso de investigación ecológica y cultural realizado en el PNBO, así como el proceso de planificación participativa y la elaboración de una propuesta de potencial turístico de dicho territorio. Proyecto que ha sido innovador en la planificación de áreas protegidas en Chile, ya que ha incorporado directamente a una comunidad kawésqar como equipo técnico del proyecto, así como ha permitido levantar información de base de una zona de relevancia mundial escasamente conocida hasta antes de este estudio.

  3. O Pretérito Perfeito Composto em diacronia – uma evolução perfeita?

    Directory of Open Access Journals (Sweden)

    Martin Becker

    2016-01-01

    Full Text Available This articles deals with the semantic evolution of the Portuguese Pretérito Perfeito Composto ( PPC , which represents a remarkable case of linguistic change given the fact that it is completely out of line with the ordinary process of grammaticalisation reconstructed for the perfect in other Romance languages. The present study identifies various stages of this pathway as well as underlying semantic principles. We are especially interested in the analysis and interpretation of these developments in terms of Geeraert‘s insights on change and reconstruction of categories expounded in his seminal monograph on „Diachronic Prototype Semantics.“ In the light of his theory of prototypes, the dynamic evolution of the PPC can be understood as a shift of the prototypical meaning, or „reading,“ away from an initial centre with its network of more or less central or peripheral readings towards a different target centre of category organisation. This study of the stages and principles of the linguistic evolution of the Portuguese PPC , covering the period between the 15 th and 20 th cen - turies, is based on Mark Davies’ and Michael Ferreira’s Corpus do Português .

  4. Humanisasi Pendidikan dalam Pembentukan Kesadaran Keberagaman Umat Lintas Agama di Lamongan

    Directory of Open Access Journals (Sweden)

    Upik Zainul Abidin

    2016-11-01

    Full Text Available The discourse of interreligious harmony and tolerance has been widely discussed within countless forums. However, the phenomenon of religious disharmony, which is among other marked with social clashes, has been erroneously manipulated into intergroup conflicts among interreligious adherents. Such interreligious disharmony, viewing from simplistic category, has been commonly caused by two factors. The first is an internal factor, i.e. the factor which influences a person to behave based on his/her understanding to religious doctrines he/she subscribes such as radical-extreme, subjective-fundamental, exclusive, and literal behaviors. The second is an external factor, i.e. hedonistic and opportunistic behaviors. The article seeks to discuss interreligious harmony in the Village of Balun, Turi, Lamongan. The village is a home to three different religions, namely Islam, Christianity, and Hinduism. Regardless of such difference the Balun people have successfully created harmony among them. The study finds that there has been sort of values transformation of humanism education in the village. The values such as human rights, tolerance, solidarity, familial relationship, and social justice are culturally transformed through what so-called the Forum of Solidarity for Balun People (Forum Keakraban Warga Balun/FKWB.

  5. Electron ring design for HERA, including spin-matching

    International Nuclear Information System (INIS)

    Skuja, A.; Hand, L.; Steffen, K.; Barber, D.

    1984-01-01

    A. Skuja has been working in collaboration with Professor Lou Hand in obtaining an optics for the electron ring at HERA that satisfies the usual constraints of an electron storage ring, but in addition allows longitudinal polarization in the interaction region without depolarizing the electron beam completely. This collaboration effort grew out of their work on a possible electron ring at Fermilab. When this project was degraded in priority at Fermilab, they turned their attention to the HERA project at DESY. The HERA project will have an electron ring of about 30 GeV e - (or e + ) incident on 800 GeV protons. Recently it has been decided that the collisions should be head on (0 0 crossing), although all previous designs had a crossing angle of the 2 beams of 20 mrad. Professors Hand and Skuja implemented a complete program in the last year and a half that could fit the usual Turis parameters as well as the so called 12 spin-matching conditions of Chao and Yukoya for all possible machine elements including solenoids. The program has the possibility of fully coupling vertical and horizontal motion using the usual eigenvalue method

  6. Test design requirements: Canister-scale heater test

    International Nuclear Information System (INIS)

    Schauer, M.I.; Craig, P.A.; Stickney, R.G.

    1986-03-01

    This document establishes the Test Design Requirements for the design of a canister scale heater test to be performed in the Exploratory Shaft test facility. The purpose of the test is to obtain thermomechanical rock mass response data for use in validation of the numerical models. The canister scale heater test is a full scale simulation of a high-level nuclear waste container in a prototypic emplacement borehole. Electric heaters are used to simulate the heat loads expected in an actual waste container. This document presents an overview of the test including objectives and justification for the test. A description of the test as it is presently envisioned is included. Discussions on Quality Assurance and Safety are also included in the document. 12 refs., 1 fig

  7. Testing on air cleaning systems: Testing of the components in-place tests

    International Nuclear Information System (INIS)

    Billard, F.; Brion, J.

    1967-01-01

    The reliability of air cleaning systems is dependent on testing they are submitted to. Although in-place tests are the most important as they act as final tests upon achieved plants, component tests are necessary too. They allow detection of defective units before they are installed, partition of unit defects from mounting defects and they are more sensitive. For similar reasons, material teats are most useful. The various tests are described, about aerosol filters for one part, iodine trap for the other. The checked features are: materials nature, units sizes, efficiency, air resistance, flammability, humidity resistance, temperature resistance, adsorbent friability, etc... On iodine trapping systems, small check traps, working by-pass with the main trap are periodically subjected to efficiency test. This control allow to cut down the in-place tests frequency, particularly when poisoning from organic vapours is to be feared. (authors) [fr

  8. Irradiation effects test series test IE-1 test results report

    International Nuclear Information System (INIS)

    Quapp, W.J.; Allison, C.M.; Farrar, L.C.; Mehner, A.S.

    1977-03-01

    The report describes the results of the first programmatic test in the Nuclear Regulatory Commission Irradiation Effects Test Series. This test (IE-1) used four 0.97m long PWR-type fuel rods fabricated from previously irradiated Saxton fuel. The objectives of this test were to evaluate the effect of fuel pellet density on pellet-cladding interaction during a power ramp and to evaluate the influence of the irradiated state of the fuel and cladding on rod behavior during film boiling operation. Data are presented on the behavior of irradiated fuel rods during steady-state operation, a power ramp, and film boiling operation. The effects of as-fabricated gap size, as-fabricated fuel density, rod power, and power ramp rate on pellet-cladding interaction are discussed. Test data are compared with FRAP-T2 computer model predictions, and comments on the consequences of sustained film boiling operation on irradiated fuel rod behavior are provided

  9. Irradiation effects test Series Scoping Test 1: test results report

    International Nuclear Information System (INIS)

    Quapp, W.J.; Allison, C.M.; Farrar, L.C.

    1977-09-01

    The report describes the results of the first scoping test in the Irradiation Effects Test Series conducted by the Thermal Fuels Behavior Program, which is part of the Water Reactor Research Program of EG and G Idaho, Inc. The research is sponsored by the United States Nuclear Regulatory Commission. This test used an unirradiated, three-foot-long, PWR-type fuel rod. The objective of this test was to thoroughly evaluate the remote fabrication procedures to be used for irradiated rods in future tests, handling plans, and reactor operations. Additionally, selected fuel behavior data were obtained. The fuel rod was subjected to a series of preconditioning power cycles followed by a power increase which brought the fuel rod power to about 20.4 kW/ft peak linear heat rating at a coolant mass flux of 1.83 x 10 6 lb/hr-ft 2 . Film boiling occurred for a period of 4.8 minutes following flow reductions to 9.6 x 10 5 and 7.5 x 10 5 lb/hr-ft 2 . The test fuel rod failed following reactor shutdown as a result of heavy internal and external cladding oxidation and embrittlement which occurred during the film boiling operation

  10. Testing Significance Testing

    Directory of Open Access Journals (Sweden)

    Joachim I. Krueger

    2018-04-01

    Full Text Available The practice of Significance Testing (ST remains widespread in psychological science despite continual criticism of its flaws and abuses. Using simulation experiments, we address four concerns about ST and for two of these we compare ST’s performance with prominent alternatives. We find the following: First, the 'p' values delivered by ST predict the posterior probability of the tested hypothesis well under many research conditions. Second, low 'p' values support inductive inferences because they are most likely to occur when the tested hypothesis is false. Third, 'p' values track likelihood ratios without raising the uncertainties of relative inference. Fourth, 'p' values predict the replicability of research findings better than confidence intervals do. Given these results, we conclude that 'p' values may be used judiciously as a heuristic tool for inductive inference. Yet, 'p' values cannot bear the full burden of inference. We encourage researchers to be flexible in their selection and use of statistical methods.

  11. Test report - caustic addition system operability test procedure

    International Nuclear Information System (INIS)

    Parazin, R.E.

    1995-01-01

    This Operability Test Report documents the test results of test procedure WHC-SD-WM-OTP-167 ''Caustic Addition System Operability Test Procedure''. The Objective of the test was to verify the operability of the 241-AN-107 Caustic Addition System. The objective of the test was met

  12. Test Architecture, Test Retrofit

    Science.gov (United States)

    Fulcher, Glenn; Davidson, Fred

    2009-01-01

    Just like buildings, tests are designed and built for specific purposes, people, and uses. However, both buildings and tests grow and change over time as the needs of their users change. Sometimes, they are also both used for purposes other than those intended in the original designs. This paper explores architecture as a metaphor for language…

  13. Standard test method for creep-fatigue testing

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This test method covers the determination of mechanical properties pertaining to creep-fatigue deformation or crack formation in nominally homogeneous materials, or both by the use of test specimens subjected to uniaxial forces under isothermal conditions. It concerns fatigue testing at strain rates or with cycles involving sufficiently long hold times to be responsible for the cyclic deformation response and cycles to crack formation to be affected by creep (and oxidation). It is intended as a test method for fatigue testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. The cyclic conditions responsible for creep-fatigue deformation and cracking vary with material and with temperature for a given material. 1.2 The use of this test method is limited to specimens and does not cover testing of full-scale components, structures, or consumer products. 1.3 This test method is primarily ...

  14. Energy Systems Test Area (ESTA) Electrical Power Systems Test Operations: User Test Planning Guide

    Science.gov (United States)

    Salinas, Michael J.

    2012-01-01

    Test process, milestones and inputs are unknowns to first-time users of the ESTA Electrical Power Systems Test Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

  15. Digface characterization test plan (remote testing)

    International Nuclear Information System (INIS)

    Croft, K.; Hyde, R.; Allen, S.

    1993-08-01

    The objective of the Digface Characterization (DFC) Remote Testing project is to remotely deploy a sensor head (Mini-Lab) across a digface to determine if it can characterize the contents below the surface. The purpose of this project is to provide a robotics technology that allows removal of workers from hazards, increases speed of operations, and reduces life cycle costs compared to alternate methods and technologies. The Buried Waste Integrated Demonstration (BWID) is funding the demonstration, testing, and evaluation of DFC. This document describes the test plan for the DFC remote deployment demonstration for the BWID. The purposes of the test plan are to establish test parameters so that the demonstration results are deemed useful and usable and perform the demonstration in a safe manner and within all regulatory requirements

  16. Including test errors in evaluating surveillance test intervals

    International Nuclear Information System (INIS)

    Kim, I.S.; Samanta, P.K.; Martorell, S.; Vesely, W.E.

    1991-01-01

    Technical Specifications require surveillance testing to assure that the standby systems important to safety will start and perform their intended functions in the event of plant abnormality. However, as evidenced by operating experience, the surveillance tests may be adversely impact safety because of their undesirable side effects, such as initiation of plant transients during testing or wearing-out of safety systems due to testing. This paper first defines the concerns, i.e., the potential adverse effects of surveillance testing, from a risk perspective. Then, we present a methodology to evaluate the risk impact of those adverse effects, focusing on two important kinds of adverse impacts of surveillance testing: (1) risk impact of test-caused trips and (2) risk impact of test-caused equipment wear. The quantitative risk methodology is demonstrated with several surveillance tests conducted at boiling water reactors, such as the tests of the main steam isolation valves, the turbine overspeed protection system, and the emergency diesel generators. We present the results of the risk-effectiveness evaluation of surveillance test intervals, which compares the adverse risk impact with the beneficial risk impact of testing from potential failure detection, along with insights from sensitivity studies

  17. Endurance test of DUPIC irradiation test rig-003

    Energy Technology Data Exchange (ETDEWEB)

    Moon, J.S; Yang, M.S.; Lee, C.Y.; Ryu, J.S.; Jeon, H.G

    2001-04-01

    This report presents the pressure drop, vibration and endurance test results for DUPIC Irradiation Test Rig-003 which was design and fabricated by KAERI. From the pressure drop and vibration test results, it is verified that DUPIC Irradiation Test Rig-003 satisfied the limit conditions of HANARO. And, remarkable wear is not observed in DUPIC Irradiation Test Rig-003 during 40 endurance test days.

  18. Ultrasonic Testing

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyeong Jun; Kuk, Jeong Han

    2002-02-15

    This book introduces ultrasonic testing, which tells of outline of ultrasonic testing, principle of ultrasonic testing, prosperities of ultrasonic waves, radiographic test and ultrasonic test, basic theory on ultrasonic testing, mode conversion, transmission and diffraction, ultrasonic flaw detection and probe, standard test piece and reference test piece, like KS(JIS) ASME and ASTM, classification and properties of ultrasonic testing, straight beam method, angle beam method, ASME SEC.V.Art.5 ASTMA 388 and KS B 0817 Korean industrial standard.

  19. Extended shadow test approach for constrained adaptive testing

    NARCIS (Netherlands)

    Veldkamp, Bernard P.; Ariel, A.

    2002-01-01

    Several methods have been developed for use on constrained adaptive testing. Item pool partitioning, multistage testing, and testlet-based adaptive testing are methods that perform well for specific cases of adaptive testing. The weighted deviation model and the Shadow Test approach can be more

  20. From Test Takers to Test Makers

    Science.gov (United States)

    Smith, Kari

    2009-01-01

    As a classroom teacher, Kari Smith realized that traditional objective tests don't always assess what students actually know. But tests are so deeply embedded in the education system that it would be difficult to do away with them entirely. Smith decided to make tests into learning tools. In this article, Smith describes three strategies for…

  1. Test design requirements: Thermal conductivity probe testing

    International Nuclear Information System (INIS)

    Heath, R.E.

    1985-01-01

    This document establishes the test design requirements for development of a thermal conductivity probe test. The thermal conductivity probe determines in situ thermal conductivity using a line source transient heat conduction analysis. This document presents the rationale for thermal conductivity measurement using a thermal conductivity probe. A general test description is included. Support requirements along with design constraints are detailed to allow simple design of the thermal conductivity probe and test. The schedule and delivery requirements of the responsible test designer are also included. 7 refs., 1 fig

  2. NIF ICCS Test Controller for Automated and Manual Testing

    International Nuclear Information System (INIS)

    Zielinski, J S

    2007-01-01

    The National Ignition Facility (NIF) Integrated Computer Control System (ICCS) is a large (1.5 MSLOC), hierarchical, distributed system that controls all aspects of the NIF laser [1]. The ICCS team delivers software updates to the NIF facility throughout the year to support shot operations and commissioning activities. In 2006, there were 48 releases of ICCS: 29 full releases, 19 patches. To ensure the quality of each delivery, thousands of manual and automated tests are performed using the ICCS Test Controller test infrastructure. The TestController system provides test inventory management, test planning, automated test execution and manual test logging, release testing summaries and test results search, all through a web browser interface. Automated tests include command line based frameworks server tests and Graphical User Interface (GUI) based Java tests. Manual tests are presented as a checklist-style web form to be completed by the tester. The results of all tests, automated and manual, are kept in a common repository that provides data to dynamic status reports. As part of the 3-stage ICCS release testing strategy, the TestController system helps plan, evaluate and track the readiness of each release to the NIF facility

  3. Reiter haemagglutination test: a screening test for syphilis.

    OpenAIRE

    Al-Qudah, A A; Mostratos, A

    1982-01-01

    Using an ultrasonicate of the Reiter treponeme as antigen the Reiter haemagglutination test (RHA) was evaluated as a serological test for syphilis. Comparison of the results of the cardiolipin Wassermann reaction, Reiter protein complement-fixation test, the fluorescent treponemal antibody-absorbed (FTA-ABS) test, the Treponema pallidum haemagglutination test (TPHA) (at dilutions of 1/16 and 1/80), and the Venereal Disease Research Laboratory test with those of the RHA showed that the RHA was...

  4. 40 CFR 53.65 - Test procedure: Loading test.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Loading test. 53.65... Characteristics of Class II Equivalent Methods for PM2.5 § 53.65 Test procedure: Loading test. (a) Overview. (1) The loading tests are designed to quantify any appreciable changes in a candidate method sampler's...

  5. Parallelize Automated Tests in a Build and Test Environment

    OpenAIRE

    Durairaj, Selva Ganesh

    2016-01-01

    This thesis investigates the possibilities of finding solutions, in order to reduce the total time spent for testing and waiting times for running multiple automated test cases in a test framework. The “Automated Test Framework”, developed by Axis Communications AB, is used to write the functional tests to test both hardware and software of a resource. The functional tests that tests the software is considered in this thesis work. In the current infrastructure, tests are executed sequentially...

  6. 40 CFR 53.66 - Test procedure: Volatility test.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Volatility test. 53.66... Characteristics of Class II Equivalent Methods for PM2.5 § 53.66 Test procedure: Volatility test. (a) Overview. This test is designed to ensure that the candidate method's losses due to volatility when sampling semi...

  7. Hemoglobin Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/hemoglobintest.html Hemoglobin Test To use the sharing features on this page, please enable JavaScript. What is a Hemoglobin Test? A hemoglobin test measures the levels of hemoglobin ...

  8. Amylase Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/amylasetest.html Amylase Test To use the sharing features on this page, please enable JavaScript. What is an Amylase Test? An amylase test measures the amount of amylase ...

  9. Hematocrit Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/hematocrittest.html Hematocrit Test To use the sharing features on this page, please enable JavaScript. What is a Hematocrit Test? A hematocrit test is a type of blood ...

  10. Procalcitonin Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/procalcitonintest.html Procalcitonin Test To use the sharing features on this page, please enable JavaScript. What is a Procalcitonin Test? A procalcitonin test measures the level of procalcitonin ...

  11. Test re-test reliability and construct validity of the star-track test of manual dexterity

    DEFF Research Database (Denmark)

    Kildebro, Niels; Amirian, Ilda; Gögenur, Ismail

    2015-01-01

    Objectives. We wished to determine test re-test reliability and construct validity of the star-track test of manual dexterity. Design. Test re-test reliability was examined in a controlled study. Construct validity was tested in a blinded randomized crossover study. Setting. The study was performed...... at a university hospital in Denmark. Participants. A total of 11 subjects for test re-test and 20 subjects for the construct validity study were included. All subjects were healthy volunteers. Intervention. The test re-test trial had two measurements with 2 days pause in between. The interventions...... in the construct validity study included baseline measurement, intervention 1: fatigue, intervention 2: stress, and intervention 3: fatigue and stress. There was a 2 day pause between each intervention. Main outcome measure. An integrated measure of completion time and number of errors was used. Results. All...

  12. Test quality

    International Nuclear Information System (INIS)

    Hartley, R.S.; Keller, A.E.

    1992-01-01

    Inservice testing of safety-related components at nuclear power plants is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section 11 of the Code state test method and frequency requirements for pumps and valves, respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

  13. Magnesium Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  14. Lipase Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  15. Rubella Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  16. Mono Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  17. AMA Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  18. Irradiation Effects Test Series: Test IE-3. Test results report

    International Nuclear Information System (INIS)

    Farrar, L.C.; Allison, C.M.; Croucher, D.W.; Ploger, S.A.

    1977-10-01

    The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m 2 . After a flow reduction to 2120 kg/s-m 2 , film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions

  19. Allergy tests: Comparison between the Radio-Allergo-Sorbent Test (RAST) and cutaneous test as well as inhalative provocation test

    International Nuclear Information System (INIS)

    Langenstrass, J.A.

    1979-01-01

    As this publication has shown, the Radio-Allergo-Sorbent Test (RAST) is well suited for investigation programs. Absence of physical strain for the patient, precise reproducibility of the results and fair agreement with other test methods are above all qualities in favour of RAST. Its main disadvantages are the as yet rather restricted spectrum of allergens and expensiveness and high technical requirement. Substantial technical requirements are also involved with the inhalative provocation test, if properly carried out, but here the spectrum of allergens is by far greater. On the other hand, it exposes patients to great physical strain. The skin tests are most simple to carry out but present the largest position of misresults and are less reproducible than the two former procedures. The Radio-Immuno-Sorbent Test (RIST) can provide very useful results as a preliminary test but is also very costly owing to its high technical demands. - In conclusion, RAST is most conveniently used as a co-test in a complete investigation program where it constitutes a valuable aid. As a sole alternative to skin tests and inhalative provocation tests it is a yet not recommendable for the above-mentioned reasons. Although not able to replace the two conventional methods within the foreseeable future, it is expected to be used more widely on further development. (orig./MG) [de

  20. Re-test reliability of gustatory testing and introduction of the sensitive Taste-Drop-Test

    DEFF Research Database (Denmark)

    Fjaeldstad, A; Niklassen, A; Fernandes, H

    2018-01-01

    . Testing gustatory function can be important for diagnostics and assessment of treatment effects. However, the gustatory tests applied are required to be both sensitive and reliable.In this study, we investigate the re-test validity of popular Taste Strips gustatory test for gustatory screening....... Furthermore, we introduce a new sensitive Taste-Drop-Test, which was found to be superior for detecting a more accurate measure of tastant sensitivity....

  1. Energy Systems Test Area (ESTA). Power Systems Test Facilities

    Science.gov (United States)

    Situ, Cindy H.

    2010-01-01

    This viewgraph presentation provides a detailed description of the Johnson Space Center's Power Systems Facility located in the Energy Systems Test Area (ESTA). Facilities and the resources used to support power and battery systems testing are also shown. The contents include: 1) Power Testing; 2) Power Test Equipment Capabilities Summary; 3) Source/Load; 4) Battery Facilities; 5) Battery Test Equipment Capabilities Summary; 6) Battery Testing; 7) Performance Test Equipment; 8) Battery Test Environments; 9) Battery Abuse Chambers; 10) Battery Abuse Capabilities; and 11) Battery Test Area Resources.

  2. PRODUCEREA ŞI COMERCIALIZAREA BĂUTURILOR ALCOOLICE ÎN ORAŞELE DIN RZECZPOSPOLITA ŞI ŢARA MOLDOVEI (SEC.XVI-XVII

    Directory of Open Access Journals (Sweden)

    Nicolae DUDNICENCO

    2016-12-01

    Full Text Available Articolul vizează producerea, comercializarea şi consumul băuturilor alcoolice în oraşele din Rzeczpospolita (a berii, a votcii, a miedului şi din Ţara Moldovei (a vinului, a rachiului, a berii, a brăgii în sec. XVI-XVII. Se investighează mo­dul de producere, comercializare, precum şi taxele care se percepeau pentru băuturile alcoolice în oraşele din teri­toriul dat. Producerea băuturilor alcoolice aducea venituri mari economiei oraşelor din spaţiul indicat supra.PRODUCTION AND COMMERCIALISATION OF ALCOHOLIC DRINKS IN RZECZPOSPOLITA AND MOLDOVA PRINCIPALITY CITIES (XVI-XVII C.The article targeting the production, marketing and consumption of alcoholic drinks in the cities from Rzeczpospolita (beer, vodka, mead and from Moldova (wine, spirits, beer, braga in the XVI-XVII c. It have been investigated the mode of production, sell and taxes at which were subjected the alcoholic drinks in the cities on that territory. Production of alcoholic drinks brought substantial revenues to the economy of the cities from the indicated area.

  3. Health lifestyles in Ukraine.

    Science.gov (United States)

    Cockerham, William C; Hinote, Brian P; Abbott, Pamela; Haerpfer, Christian

    2005-01-01

    Several studies have identified negative health lifestyles as a primary determinant of the mortality crisis in Europe's post-communist states, but little is known about Ukraine. In order to address this gap in the literature, this paper provides data on Ukrainian health lifestyles. Data were collected by face-to-face interviews in the households (N = 2 400) of a random sample of respondents in Ukraine in November, 2001. The sample was selected using multi-stage random sampling with stratification by region and area (urban/rural). Data were analyzed using logistic regression. Male gender was found to be the most powerful single predictor of negative health lifestyles as shown in the results for frequent drinking, heavy vodka use at one occasion, smoking, and diet. Males rated their health status better than females, but over one-third of the males and one-half of the females rated their health status as rather bad or bad. Gender and class differences in health lifestyle practices appear to be key variables, with working-class males showing the most negative practices. The results for health status suggest that the overall level of health in Ukraine is not good.

  4. Importul de mărfuri din Imperiul Rus în Principatul Moldovei la sfârşitul secolului al XVIII-lea - începutul secolului al XIX-lea / Imports from the Russian Empire into the Principality of Moldavia at the end of the 18th century - the beginning of the 19th century

    Directory of Open Access Journals (Sweden)

    Irina Cereş

    2016-10-01

    Full Text Available In the period under review trade relations between the Principality of Moldavia and the Russian Empire experienced a new stage of development. Moldavia continued to import consumer goods from the Russian Empire. The increase in the volume of trade between the Russian Empire and the Romanian Principalities took place after the signing of the Treaty of Küçük Kaynarca. Trade relations between the Principality of Moldavia and the Russian Empire were based on the Russian-Turkish trade treaty concluded in 1783. Particularly important and especially expensive imported goods were furs. In addition to the furs, there were imported iron and steel products, which competed with the products from Austria. The government of the Russian Empire encouraged the duty-free importation of large quantities of goods from Russia ostensibly for the army, and this caused damage to the Moldavian treasury. An important role in the import of goods from the Russian Empire into the Principality of Moldavia played merchants, especially foreign ones. The analysis showed that furs, canvas, cloth, iron and ironware, linen, and vodka were predominant among these imports.

  5. Seismic testing

    International Nuclear Information System (INIS)

    Sollogoub, Pierre

    2001-01-01

    This lecture deals with: qualification methods for seismic testing; objectives of seismic testing; seismic testing standards including examples; main content of standard; testing means; and some important elements of seismic testing

  6. Proficiency Testing in Nondestructive Testing (NDT)

    International Nuclear Information System (INIS)

    Amry Amin Abbas; Suhairy Sani; Mohamad Pauzi Ismail; Abd Nassir Ibrahim

    2014-01-01

    Department of Standard Malaysia (DSM) launched myPTP programme on 31 December 2013 in accordance to ISO/IC 17043. The standard states the requirements for Proficiency Testing. The provider of these services is called Proficiency Testing Provider (PTP). The role of PTP is to compare the proficiency level between inspection bodies or laboratories. With the assistance of expert panel, the PTP will determine the assigned value as reference to be compared to the values obtained from the inspection bodies or laboratories. Quality wise, this services is important as participation will improve wuality of the inspection quality continuously and increase confidence level of client and improve safety level. Requirement of PT in NDT is mentioned in SC1.5- Specific Criteria for Accreditation of Mechanical Testing and Non-Destructive Testing (NDT) for MS ISO/IEC17025 and MTR2- MIBAS Technical Requirements for Accreditation of NDT. This paper explains and discusses the result of this proficiency test done on a number of NDT companies that participated. (author)

  7. Built-In Test Engine For Memory Test

    OpenAIRE

    McEvoy, Paul; Farrell, Ronan

    2004-01-01

    In this paper we will present an on-chip method for testing high performance memory devices, that occupies minimal area and retains full flexibility. This is achieved through microcode test instructions and the associated on-chip state machine. In addition, the proposed methodology will enable at-speed testing of memory devices. The relevancy of this work is placed in context with an introduction to memory testing and the techniques and algorithms generally used today.

  8. Schirmer test

    Science.gov (United States)

    Tear test; Tearing test; Dry eye test; Basal secretion test; Sjögren - Schirmer; Schirmer's test ... used when the eye doctor suspects you have dry eye. Symptoms include dryness of the eyes or excessive ...

  9. The Relationship between Anxiety and Test-Taking C-Test and Cloze-Test

    Science.gov (United States)

    Azimi, Mozhgan

    2016-01-01

    Anxiety has an important role in teaching and learning. If teachers can recognize which kind of tests create high anxiety then they will be able to omit these kinds of tests. Then, the results of test can probably show the students' knowledge more carefully. The subjects of the present study were sixty Iranian female junior university students.…

  10. Test quality

    International Nuclear Information System (INIS)

    Hartley, R.S.; Keller, A.E.

    1992-01-01

    This document discusses inservice testing of safety-related components at nuclear power plants which is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section XI of the Code state test method and frequency requirements for pumps and valves respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing

  11. Virtual Turbine Engine Test Bench Using MGET Test Device

    Science.gov (United States)

    Kho, Seonghee; Kong, Changduk; Ki, Jayoung

    2015-05-01

    Test device using virtual engine simulator can help reduce the number of engine tests through tests similar to the actual engine tests and repeat the test under the same condition, and thus reduce the engine maintenance and operating costs [1]. Also, as it is possible to easily implement extreme conditions in which it is hard to conduct actual tests, it can prevent engine damages that may happen during the actual engine test under such conditions. In this study, an upgraded MGET test device was developed that can conduct both real and virtual engine test by applying real-time engine model to the existing MGET test device that was developed and has been sold by the Company. This newly developed multi-purpose MGET test device is expected to be used for various educational and research purposes.

  12. Integrated Test and Evaluation Flight Test 3 Flight Test Plan

    Science.gov (United States)

    Marston, Michael Lawrence

    2015-01-01

    The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration into the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability, Human Systems Integration (HSI), and Communication to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Sense and Avoid (SAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including the integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project will conduct a series of Human-in-the-Loop and Flight Test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity and complexity of the previous tests and

  13. Test report for core drilling ignitability testing

    International Nuclear Information System (INIS)

    Witwer, K.S.

    1996-01-01

    Testing was carried out with the cooperation of Westinghouse Hanford Company and the United States Bureau of Mines at the Pittsburgh Research Center in Pennsylvania under the Memorandum of Agreement 14- 09-0050-3666. Several core drilling equipment items, specifically those which can come in contact with flammable gasses while drilling into some waste tanks, were tested under conditions similar to actual field sampling conditions. Rotary drilling against steel and rock as well as drop testing of several different pieces of equipment in a flammable gas environment were the specific items addressed. The test items completed either caused no ignition of the gas mixture, or, after having hardware changes or drilling parameters modified, produced no ignition in repeat testing

  14. Neuropathy Tests

    Science.gov (United States)

    ... LD) Lactoferrin Lactose Tolerance Tests LDL Cholesterol LDL Particle Testing (LDL-P) Lead Legionella Testing Leptin Levetiracetam Lipase ... tests, such as computed tomography (CT) scans or magnetic resonance imaging ... suspected, additional testing may be performed to evaluate heart rate, blood ...

  15. Pinworm test

    Science.gov (United States)

    Oxyuriasis test; Enterobiasis test; Tape test ... diagnose this infection is to do a tape test. The best time to do this is in ... lay their eggs at night. Steps for the test are: Firmly press the sticky side of a ...

  16. Coverage of the Test of Memory Malingering, Victoria Symptom Validity Test, and Word Memory Test on the Internet: is test security threatened?

    Science.gov (United States)

    Bauer, Lyndsey; McCaffrey, Robert J

    2006-01-01

    In forensic neuropsychological settings, maintaining test security has become critically important, especially in regard to symptom validity tests (SVTs). Coaching, which can entail providing patients or litigants with information about the cognitive sequelae of head injury, or teaching them test-taking strategies to avoid detection of symptom dissimulation has been examined experimentally in many research studies. Emerging evidence supports that coaching strategies affect psychological and neuropsychological test performance to differing degrees depending on the coaching paradigm and the tests administered. The present study sought to examine Internet coverage of SVTs because it is potentially another source of coaching, or information that is readily available. Google searches were performed on the Test of Memory Malingering, the Victoria Symptom Validity Test, and the Word Memory Test. Results indicated that there is a variable amount of information available about each test that could threaten test security and validity should inappropriately interested parties find it. Steps that could be taken to improve this situation and limitations to this exploration are discussed.

  17. Test techniques for fracture mechanics testing

    International Nuclear Information System (INIS)

    Schwalbe, K.H.

    1980-01-01

    Test methods for fracture mechanics tests are described. Two groups of techniques are distinguished: Those for measurement of stable crack growth and those for determination of the loading parameters. (orig.) [de

  18. Large scale reflood test with cylindrical core test facility (CCTF). Core I. FY 1979 tests

    International Nuclear Information System (INIS)

    Murao, Yoshio; Akimoto, Hajime; Okubo, Tsutomu; Sudoh, Takashi; Hirano, Kenmei

    1982-03-01

    This report presents the results of analysis of the data obtained in the CCTF Core I test series (19 tests) in FY. 1979 as an interim report. The Analysis of the test results showed that: (1) The present safety evaluation model on the reflood phenomena during LOCA conservatively represents the phenomena observed in the tests except for the downcomer thermohydrodynamic behavior. (2) The downcomer liquid level rose slowly and it took long time for the water to reach a terminal level or the spill-over level. It was presume that such a results was due to an overly conservative selection of the ECC flow rate. This presumption will be checked against a future test result for an increased flow rate. The loop-seal-water filling test was unsuccessful due to a premature power shutdown by the core protection circuit. The test will be conducted again. The tests to be performed in the future are summerized. Tests for investigation of the refill phenomena were also proposed. (author)

  19. Motivation and Test Anxiety in Test Performance across Three Testing Contexts: The CAEL, CET, and GEPT

    Science.gov (United States)

    Cheng, Liying; Klinger, Don; Fox, Janna; Doe, Christine; Jin, Yan; Wu, Jessica

    2014-01-01

    This study examined test-takers' motivation, test anxiety, and test performance across a range of social and educational contexts in three high-stakes language tests: the Canadian Academic English Language (CAEL) Assessment in Canada, the College English Test (CET) in the People's Republic of China, and the General English Proficiency Test (GEPT)…

  20. Randomization tests

    CERN Document Server

    Edgington, Eugene

    2007-01-01

    Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

  1. Galileo battery testing and the impact of test automation

    Science.gov (United States)

    Pertuch, W. T.; Dils, C. T.

    1985-01-01

    Test complexity, changes of test specifications, and the demand for tight control of tests led to the development of automated testing used for Galileo and other projects. The use of standardized interfacing, i.e., IEEE-488, with desktop computers and test instruments, resulted in greater reliability, repeatability, and accuracy of both control and data reporting. Increased flexibility of test programming has reduced costs by permitting a wide spectrum of test requirements at one station rather than many stations.

  2. Potential of Ruminant Feed with Appearance of In Vitro Gas Production

    Directory of Open Access Journals (Sweden)

    Firsoni

    2017-10-01

    Full Text Available Indonesia has many kinds of feedstuff with different qualities that can be used as ruminants feed. One way to evaluate it is analyzing the performance of the feed gas production value in vitro. Feed ingredients tested in this study were the flour of coffee hull, peanut hull, field grass, turn leaves, rice straw and fermented rice straw. Samples weighed 200 ± 5 mg, put into a 100 ml syringe glass, added 30 ml buffalo rumen liquor with bicarbonate buffer medium, then incubated in the water bath at 39 ° C for 48 hours. Neway software and random block design with 4 blocks are used to calculate the value of fitted gas and to analyze the variance. The variables measured were gas production 2, 4, 6, 8, 10, 12, 24, 48, 72 and 96 hours, organic material degradable, gas production potential (a+b, gas production rate (k. The highest gas production 24, 48 and 72 hours from the field grass treatment (C was 36.33, 51.12 and 56.29 ml/200 mg DM but 96 hours of rice straw ie 59.60 ml/200 mg DM, while the lowest (24, 48, 72 and 96 hours of coffee skin (6.08, 7.77, 7.61, and 7.68 ml/200 mg DM respectively. The highest gas production potential of rice straw is 69.13 ml/200 mg DM and the lowest of coffee skin is 7.72 ml/200 mg BK. The highest percentage of gas production after 24 hours was obtained Turi leaves (D: 91.46% and the lowest rice straw (E: 41.22%. Rice straw can be suggested to be field grass substitution by processed again to reduce its crude fiber content, while the coffee and peanut hulls need further study, due to low gas production potential of 7.72 and 11.45 ml / 200 mg DM.

  3. Error response test system and method using test mask variable

    Science.gov (United States)

    Gender, Thomas K. (Inventor)

    2006-01-01

    An error response test system and method with increased functionality and improved performance is provided. The error response test system provides the ability to inject errors into the application under test to test the error response of the application under test in an automated and efficient manner. The error response system injects errors into the application through a test mask variable. The test mask variable is added to the application under test. During normal operation, the test mask variable is set to allow the application under test to operate normally. During testing, the error response test system can change the test mask variable to introduce an error into the application under test. The error response system can then monitor the application under test to determine whether the application has the correct response to the error.

  4. Tensile testing

    CERN Document Server

    2004-01-01

    A complete guide to the uniaxial tensile test, the cornerstone test for determining the mechanical properties of materials: Learn ways to predict material behavior through tensile testing. Learn how to test metals, alloys, composites, ceramics, and plastics to determine strength, ductility and elastic/plastic deformation. A must for laboratory managers, technicians, materials and design engineers, and students involved with uniaxial tensile testing. Tensile Testing , Second Edition begins with an introduction and overview of the test, with clear explanations of how materials properties are determined from test results. Subsequent sections illustrate how knowledge gained through tensile tests, such as tension properties to predict the behavior (including strength, ductility, elastic or plastic deformation, tensile and yield strengths) have resulted in improvements in materals applications. The Second Edition is completely revised and updated. It includes expanded coverage throughout the volume on a variety of ...

  5. Ham test

    Science.gov (United States)

    Acid hemolysin test; Paroxysmal nocturnal hemoglobinuria - Ham test; PNH - Ham test ... BJ. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. Philadelphia, PA: Elsevier ...

  6. Test Re-Test Reliability of Four Versions of the 3-Cone Test in Non-Athletic Men

    Directory of Open Access Journals (Sweden)

    Jason G. Langley, Robert D. Chetlin

    2017-03-01

    Full Text Available Until recently, measurement and evaluation in sport science, especially agility testing, has not always included key elements of proper test construction. Often tests are published without reporting reliability and validity analysis for a specific population. The purpose of the present study was to examine the test re-test reliability of four versions of the 3-Cone Test (3CT, and provide guidance on proper test construction for testing agility in athletic populations. Forty male students enrolled in classes in the Department of Physical Education at a mid-Atlantic university participated. On each of test day participants performed 10 trials. In random order, they performed three trials to the right (3CTR, standard test, three to the left (3CTL, and two modified trials (3CTAR and 3CTAL, which included a reactive component in which a visual cue was given to indicate direction. Intra-class correlation coefficients (ICC indicated a moderate to high reliability for the four tests, 3CTR 0.79 (0.64-0.88, 95%CI, 3CTL 0.73 (0.55-0.85, 3CTAR 0.85(0.74-0.92, and 3CTAL 0.79 (0.64-0.88. Small standard error of the measurement (SEM was found; range 0.09 to 0.10. Pearson correlations between tests were high (0.82-0.92 on day one as well as day two (0.72-0.85. These results indicate each version of the 3-Cone Test is reliable; however, further tests are needed with specific athletic populations. Only the 3CTAR and 3CTAL are tests of agility due to the inclusion of a reactive component. Future studies examining agility testing and training should incorporate technological elements, including automated timing systems and motion capture analysis. Such instrumentation will allow for optimal design of tests that simulate sport-specific game conditions.

  7. Allergy testing - skin

    Science.gov (United States)

    Patch tests - allergy; Scratch tests - allergy; Skin tests - allergy; RAST test; Allergic rhinitis - allergy testing; Asthma - allergy testing; Eczema - allergy testing; Hayfever - allergy testing; Dermatitis - allergy testing; Allergy testing; ...

  8. Irradiation effects test series, test IE-5. Test results report

    International Nuclear Information System (INIS)

    Croucher, D.W.; Yackle, T.R.; Allison, C.M.; Ploger, S.A.

    1978-01-01

    Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m 2 for each rod. After a flow reduction to 1800 kg/s-m 2 , film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m 2 produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results

  9. Integrating Test-Form Formatting into Automated Test Assembly

    Science.gov (United States)

    Diao, Qi; van der Linden, Wim J.

    2013-01-01

    Automated test assembly uses the methodology of mixed integer programming to select an optimal set of items from an item bank. Automated test-form generation uses the same methodology to optimally order the items and format the test form. From an optimization point of view, production of fully formatted test forms directly from the item pool using…

  10. Reliability of two social cognition tests: The combined stories test and the social knowledge test.

    Science.gov (United States)

    Thibaudeau, Élisabeth; Cellard, Caroline; Legendre, Maxime; Villeneuve, Karèle; Achim, Amélie M

    2018-04-01

    Deficits in social cognition are common in psychiatric disorders. Validated social cognition measures with good psychometric properties are necessary to assess and target social cognitive deficits. Two recent social cognition tests, the Combined Stories Test (COST) and the Social Knowledge Test (SKT), respectively assess theory of mind and social knowledge. Previous studies have shown good psychometric properties for these tests, but the test-retest reliability has never been documented. The aim of this study was to evaluate the test-retest reliability and the inter-rater reliability of the COST and the SKT. The COST and the SKT were administered twice to a group of forty-two healthy adults, with a delay of approximately four weeks between the assessments. Excellent test-retest reliability was observed for the COST, and a good test-retest reliability was observed for the SKT. There was no evidence of practice effect. Furthermore, an excellent inter-rater reliability was observed for both tests. This study shows a good reliability of the COST and the SKT that adds to the good validity previously reported for these two tests. These good psychometrics properties thus support that the COST and the SKT are adequate measures for the assessment of social cognition. Copyright © 2018. Published by Elsevier B.V.

  11. Irradiation Effects Test Series: Test IE-3. Test results report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, L. C.; Allison, C. M.; Croucher, D. W.; Ploger, S. A.

    1977-10-01

    The objectives of the test reported were to: (a) determine the behavior of irradiated fuel rods subjected to a rapid power increase during which the possibility of a pellet-cladding mechanical interaction failure is enhanced and (b) determine the behavior of these fuel rods during film boiling following this rapid power increase. Test IE-3 used four 0.97-m long pressurized water reactor type fuel rods fabricated from previously irradiated fuel. The fuel rods were subjected to a preconditioning period, followed by a power ramp to 69 kW/m at a coolant mass flux of 4920 kg/s-m/sup 2/. After a flow reduction to 2120 kg/s-m/sup 2/, film boiling occurred on the fuel rods. One rod failed approximately 45 seconds after the reactor was shut down as a result of cladding embrittlement due to extensive cladding oxidation. Data are presented on the behavior of these irradiated fuel rods during steady-state operation, the power ramp, and film boiling operation. The effects of a power ramp and power ramp rates on pellet-cladding interaction are discussed. Test data are compared with FRAP-T3 computer model calculations and data from a previous Irradiation Effects test in which four irradiated fuel rods of a similar design were tested. Test IE-3 results indicate that the irradiated state of the fuel rods did not significantly affect fuel rod behavior during normal, abnormal (power ramp of 20 kW/m per minute), and accident (film boiling) conditions.

  12. RIA testing capability of the transient reactor test facility

    International Nuclear Information System (INIS)

    Crawford, D.C.; Swanson, R.W.

    1999-01-01

    The advent of high-burnup fuel implementation in LWRs has generated international interest in high-burnup LWR fuel performance. Recent testing under simulated RIA conditions has demonstrated that certain fuel designs fail at peak fuel enthalpy values that are below existing regulatory criteria. Because many of these tests were performed with non-prototypically aggressive test conditions (i.e., with power pulse widths less than 10 msec FWHM and with non-protoypic coolant configurations), the results (although very informative) do not indisputably identify failure thresholds and fuel behavior. The capability of the TREAT facility to perform simulated RIA tests with prototypic test conditions is currently being evaluated by ANL personnel. TREAT was designed to accommodate test loops and vehicles installed for in-pile transient testing. During 40 years of TREAT operation and fuel testing and evaluation, experimenters have been able to demonstrate and determine the transient behavior of several types of fuel under a variety of test conditions. This experience led to an evolution of test methodology and techniques which can be employed to assess RIA behavior of LWR fuel. A pressurized water loop that will accommodate RIA testing of LWR and CANDU-type fuel has completed conceptual design. Preliminary calculations of transient characteristics and energy deposition into test rods during hypothetical TREAT RIA tests indicate that with the installation of a pressurized water loop, the facility is quite capable of performing prototypic RIA testing. Typical test scenarios indicate that a simulated RIA with a 72 msec FWHM pulse width and energy deposition of 1200 kJ/kg (290 cal/gm) is possible. Further control system enhancements would expand the capability to pulse widths as narrow as 40 msec. (author)

  13. Trichomonas Testing

    Science.gov (United States)

    ... Genetic Tests for Targeted Cancer Therapy Glucose Tests Gonorrhea Testing Gram Stain Growth Hormone Haptoglobin hCG Pregnancy ... With some NAATs, samples collected for testing of gonorrhea and chlamydial infections can also be used to ...

  14. Science Library of Test Items. Volume Nine. Mastery Testing Programme. [Mastery Tests Series 1.] Tests M1-M13.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of the first 13 tests are provided. Skills to be tested include: (1) reading a table; (2) using a biological key; (3) identifying chemical symbols; (4) identifying parts of a human body; (5) reading a line graph; (6) identifying electronic and…

  15. Rail Impact Testing. Test Operations Procedure (TOP)

    Science.gov (United States)

    2008-09-15

    impact test. The rail impact test is used to verify structural integrity of the test item and the adequacy of the tie-down system and tie-down...strength of provisions, connection and supporting structural frame, paragraph 5.2.3 ** Superscript...parts, to include outriggers and booms) without advanced approval by SDDCTEA. Torque nuts on wire rope clips to their correct value. Torque cable

  16. Coombs test

    Science.gov (United States)

    Direct antiglobulin test; Indirect antiglobulin test; Anemia - hemolytic ... No special preparation is necessary for this test. ... There are 2 types of the Coombs test: Direct Indirect The direct ... that are stuck to the surface of red blood cells. Many diseases ...

  17. Comparison of test protocols for standard room/corner tests

    Science.gov (United States)

    R. H. White; M. A. Dietenberger; H. Tran; O. Grexa; L. Richardson; K. Sumathipala; M. Janssens

    1998-01-01

    As part of international efforts to evaluate alternative reaction-to-fire tests, several series of room/comer tests have been conducted. This paper reviews the overall results of related projects in which different test protocols for standard room/corner tests were used. Differences in the test protocols involved two options for the ignition burner scenario and whether...

  18. Chloride Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/chloridebloodtest.html Chloride Blood Test To use the sharing features on this page, please enable JavaScript. What is a Chloride Blood Test? A chloride blood test measures the ...

  19. Bilirubin Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/bilirubinbloodtest.html Bilirubin Blood Test To use the sharing features on this page, please enable JavaScript. What is a Bilirubin Blood Test? A bilirubin blood test measures the ...

  20. National Ignition Facility TestController for automated and manual testing

    Energy Technology Data Exchange (ETDEWEB)

    Zielinski, Jason, E-mail: fishler2@llnl.gov [Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States)

    2012-12-15

    The Controls and Information Systems (CIS) organization for the National Ignition Facility (NIF) has developed controls, configuration and analysis software applications that combine for several million lines of code. The team delivers updates throughout the year, from major releases containing hundreds of changes to patch releases containing a small number of focused updates. To ensure the quality of each delivery, manual and automated tests are performed using the NIF TestController test infrastructure. The TestController system provides test inventory management, test planning, automated and manual test execution, release testing summaries and results search, all through a web browser interface. As part of the three-stage software testing strategy, the NIF TestController system helps plan, evaluate and track the readiness of each release to the NIF production environment. After several years of use in testing NIF software applications, the TestController's manual testing features have been leveraged for verifying the installation and operation of NIF Target Diagnostic hardware. The TestController recorded its first test results in 2004. Today, the system has recorded the execution of more than 160,000 tests and continues to play a central role in ensuring that NIF hardware and software meet the requirements of a high reliability facility. This paper describes the TestController system and discusses its use in assuring the quality of software delivered to the NIF.

  1. National Ignition Facility TestController for automated and manual testing

    International Nuclear Information System (INIS)

    Zielinski, Jason

    2012-01-01

    The Controls and Information Systems (CIS) organization for the National Ignition Facility (NIF) has developed controls, configuration and analysis software applications that combine for several million lines of code. The team delivers updates throughout the year, from major releases containing hundreds of changes to patch releases containing a small number of focused updates. To ensure the quality of each delivery, manual and automated tests are performed using the NIF TestController test infrastructure. The TestController system provides test inventory management, test planning, automated and manual test execution, release testing summaries and results search, all through a web browser interface. As part of the three-stage software testing strategy, the NIF TestController system helps plan, evaluate and track the readiness of each release to the NIF production environment. After several years of use in testing NIF software applications, the TestController's manual testing features have been leveraged for verifying the installation and operation of NIF Target Diagnostic hardware. The TestController recorded its first test results in 2004. Today, the system has recorded the execution of more than 160,000 tests and continues to play a central role in ensuring that NIF hardware and software meet the requirements of a high reliability facility. This paper describes the TestController system and discusses its use in assuring the quality of software delivered to the NIF.

  2. HSV Serologic Testing for Pregnant Women: Willingness to Be Tested and Factors Affecting Testing

    Directory of Open Access Journals (Sweden)

    David A. Baker

    2011-01-01

    Full Text Available Objective. This prospective study was undertaken to evaluate pregnant women's willingness to undergo HSV type-specific serologic testing and factors affecting willingness in an obstetrics/gynecology ambulatory unit. Methods. At prenatal Visit 1, pregnant women (n=303 with no history of HSV-2 were tested for HSV-1/HSV-2 before and after they received counseling on genital and neonatal herpes. Results. In both the Unwilling Subgroup and the group that changed from being willing to being unwilling, the most common reasons for choosing not to be tested were not being at risk for genital herpes, being tested is too personal, and concern about what will be done with the results. Of the 134 participants in the Willing/Tested Subgroup, 27 (20% were HSV-2 seropositive and 81 (60% were HSV-1 seropositive. Conclusions. These results support the feasibility of HSV serologic testing and counseling in pregnant women.

  3. AFFTC Instruction 99-1, Test and Evaluation Test Plans

    National Research Council Canada - National Science Library

    Crane, Roger

    2002-01-01

    .... Test Information Sheets (TISs) are actually appendices to test plans and contain sufficient information for use by a flight test engineer to develop flight test cards and for management to discern the overall technical approach being taken...

  4. Scientific basis of use of fruits Coriandrum sativum L. In food technologies

    Directory of Open Access Journals (Sweden)

    Natalia Frolova

    2016-10-01

    directional control of the process distillation of complex mixtures of hydrocarbons on the distillation column. Mode of selection process the fractionation of essential oils allowed changing the component composition of the fractions and to provide more variety of flavors. Monitoring of the fractioning process allows concentrating the key aromatic components and receiving highly concentrated flavors of original pure notes. Combinations of the individual fractions with a specific weight have been created. We obtained some fractions which can be used as flavorings in food industries. Highly concentrated flavor "Coriander fragrance" was developed with fraction № 3 of essential oil coriander. "Coriander fragrance" can be used instead of the aromatic spirits of coriander seeds in liquors and spirits production for producing bitters, liquors and other drinks, e.g. vodkas "Gorilka", "Chernihivska", "Starokyivska". The flavors "Coriander fragrance" was used in processing for "Lollipop" candies, vodka special "Captain", dessert drink "Married couple".

  5. Test/score/report: Simulation techniques for automating the test process

    Science.gov (United States)

    Hageman, Barbara H.; Sigman, Clayton B.; Koslosky, John T.

    1994-01-01

    A Test/Score/Report capability is currently being developed for the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) system which will automate testing of the Goddard Space Flight Center (GSFC) Payload Operations Control Center (POCC) and Mission Operations Center (MOC) software in three areas: telemetry decommutation, spacecraft command processing, and spacecraft memory load and dump processing. Automated computer control of the acceptance test process is one of the primary goals of a test team. With the proper simulation tools and user interface, the task of acceptance testing, regression testing, and repeatability of specific test procedures of a ground data system can be a simpler task. Ideally, the goal for complete automation would be to plug the operational deliverable into the simulator, press the start button, execute the test procedure, accumulate and analyze the data, score the results, and report the results to the test team along with a go/no recommendation to the test team. In practice, this may not be possible because of inadequate test tools, pressures of schedules, limited resources, etc. Most tests are accomplished using a certain degree of automation and test procedures that are labor intensive. This paper discusses some simulation techniques that can improve the automation of the test process. The TASS system tests the POCC/MOC software and provides a score based on the test results. The TASS system displays statistics on the success of the POCC/MOC system processing in each of the three areas as well as event messages pertaining to the Test/Score/Report processing. The TASS system also provides formatted reports documenting each step performed during the tests and the results of each step. A prototype of the Test/Score/Report capability is available and currently being used to test some POCC/MOC software deliveries. When this capability is fully operational it should greatly reduce the time necessary

  6. Construction and commissioning test report of the CEDM test facility

    Energy Technology Data Exchange (ETDEWEB)

    Chung, C. H.; Kim, J. T.; Park, W. M.; Youn, Y. J.; Jun, H. G.; Choi, N. H.; Park, J. K.; Song, C. H.; Lee, S. H.; Park, J. K

    2001-02-01

    The test facility for performance verification of the control element drive mechanism (CEDM) of next generation power plant was installed at the site of KAERI. The CEDM was featured a mechanism consisting of complicated mechanical parts and electromagnetic control system. Thus, a new CEDM design should go through performance verification tests prior to it's application in a reactor. The test facility can simulate the reactor operating conditions such as temperature, pressure and water quality and is equipped with a test chamber to accomodate a CEDM as installed in the power plant. This test facility can be used for the following tests; endurance test, coil cooling test, power measurement and reactivity rod drop test. The commissioning tests for the test facility were performed up to the CEDM test conditions of 320 C and 150 bar, and required water chemistry was obtained by operating the on-line water treatment system.

  7. Construction and commissioning test report of the CEDM test facility

    International Nuclear Information System (INIS)

    Chung, C. H.; Kim, J. T.; Park, W. M.; Youn, Y. J.; Jun, H. G.; Choi, N. H.; Park, J. K.; Song, C. H.; Lee, S. H.; Park, J. K.

    2001-02-01

    The test facility for performance verification of the control element drive mechanism (CEDM) of next generation power plant was installed at the site of KAERI. The CEDM was featured a mechanism consisting of complicated mechanical parts and electromagnetic control system. Thus, a new CEDM design should go through performance verification tests prior to it's application in a reactor. The test facility can simulate the reactor operating conditions such as temperature, pressure and water quality and is equipped with a test chamber to accomodate a CEDM as installed in the power plant. This test facility can be used for the following tests; endurance test, coil cooling test, power measurement and reactivity rod drop test. The commissioning tests for the test facility were performed up to the CEDM test conditions of 320 C and 150 bar, and required water chemistry was obtained by operating the on-line water treatment system

  8. Test chamber

    NARCIS (Netherlands)

    Leferink, Frank Bernardus Johannes

    2009-01-01

    A test chamber for measuring electromagnetic radiation emitted by an apparatus to be tested or for exposing an apparatus to be tested to an electromagnetic radiation field. The test chamber includes a reverberation chamber made of a conductive tent fabric. To create a statistically uniform field in

  9. Oral Solid Dosage Form Disintegration Testing - The Forgotten Test.

    Science.gov (United States)

    Al-Gousous, Jozef; Langguth, Peter

    2015-09-01

    Since its inception in the 1930s, disintegration testing has become an important quality control (QC) test in pharmaceutical industry, and disintegration test procedures for various dosage forms have been described by the different pharmacopoeias, with harmonization among them still not quite complete. However, because of the fact that complete disintegration does not necessarily imply complete dissolution, much more research has been focused on dissolution rather than on disintegration testing. Nevertheless, owing to its simplicity, disintegration testing seems to be an attractive replacement to dissolution testing as recognized by the International Conference on Harmonization guidelines, in some cases. Therefore, with proper research being carried out to overcome the associated challenges, the full potential of disintegration testing could be tapped saving considerable efforts allocated to QC testing and quality assurance. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  10. Acceptance Testing Of Web Applications With Test Description Language

    Directory of Open Access Journals (Sweden)

    Łukasz Olek

    2014-01-01

    Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

  11. Post-test analysis of PANDA test P4

    International Nuclear Information System (INIS)

    Hart, J.; Woudstra, A.; Koning, H.

    1999-01-01

    The results of a post-test analysis of the integral system test P4, which has been executed in the PANDA facility at PSI in Switzerland within the framework of Work Package 2 of the TEPSS project are presented. The post-test analysis comprises an evaluation of the PANDA test P4 and a comparison of the test results with the results of simulations using the RELAPS/MOD3.2, TRAC-BF1, and MELCOR 1.8.4 codes. The PANDA test P4 has provided data about how trapped air released from the drywell later in the transient affects PCCS performance in an adequate manner. The well-defined measurements can serve as an important database for the assessment of thermal hydraulic system analysis codes, especially for conditions that could be met in passively operated advanced reactors, i.e. low pressure and small driving forces. Based on the analysis of the test data, the test acceptance criteria have been met. The test P4 has been successfully completed and the instrument readings were with the permitted ranges. The PCCs showed a favorable and robust performance and a wide margin for decay heat removal from the containment. The PANDA P4 test demonstrated that trapped air, released from the drywell later in the transient, only temporarily and only slightly affected the performance of the passive containment cooling system. The analysis of the results of the RELAPS code showed that the overall behaviour of the test has been calculated quite well with regards to pressure, mass flow rates, and pool boil-down. This accounts both for the pre-test and the post-test simulations. However, due to the one-dimensional, stacked-volume modeling of the PANDA DW, WW, and GDCS vessels, 3D-effects such as in-vessel mixing and recirculation could not be calculated. The post-test MELCOR simulation showed an overall behaviour that is comparable to RELAPS. However, MELCOR calculated almost no air trapping in the PCC tubes that could hinder the steam condensation rate. This resulted in lower calculated

  12. [Delivery in multiple pregnancies].

    Science.gov (United States)

    Colla, F; D'Addato, F; Grio, R

    2001-04-01

    A knowledge of clinical physiognomy in pathologies related to multiple births is indispensable for improving maternal and feto-neonatal prognosis. This study is a contribution to the solution of this problem. A meta-analysis of data for multiple births at Department B of the Gynecology and Obstetrics Clinic at the University of Turi during the decade 1989-1998 was carried out, focusing on the arrangement and presentation of fetuses, the various types of birth, the gestational age at which birth occurred, the weight of neonates, neonatal mortality and maternal morbidity. Out of 11,523 births, there were a total of 194 (1.68%) multiple births, including 190 sets of twins and 4 triplets. 154 (79.38%) premature births were reported; 20 occurred 1500 g). The perinatal mortality rate was 3.82%. Maternal complications mainly occurred during the placental state, in the immediate postpartum and in puerperio. The authors feel that a more careful medical and social assistance, preventive hospitalisation, early recognition of the risk, constant monitoring for the optimal timing of birth, and lastly, qualified medical assistance during labour (expert gynecologist, trained obstetric staff) with other medical personnel (anesthetist, neonatal specialist) represent winning strategies to solve the problems arising during multiple pregnancies.

  13. Scandal on campus. Dietrich Schwanitz reads Niklas Luhmann’s systems theory

    Directory of Open Access Journals (Sweden)

    Andrzej Denka

    2015-12-01

    Full Text Available Niklas Luhmann (1927–1998 is one of the most distinguished sociologists of the twentieth cen-tury and the author of systems theory, which to a great extent has been accommodated into lin-guistics. Dietrich Schwanitz (1940–2004, an anglicist, is one of the most interesting interpreters of Luhmann on the basis of literary studies. Schwanitz is also known as a writer and author of the novel Campus (Der Campus, 1995. The main character, a sociologist, Hanno Hackmann, is wrongly accused of the sexual harassment and rape of a student. His reckless romance is exploited by various people in the university milieu to achieve their own goals. In fact, these people are, however, only the representatives of various social systems, especially politics and the media. Striving for re-election, the university rector needs this matter for his campaign, and the media are only interested in a scandalous story to be exploited for some time. Social communication does not reflect reality, and, at the same time, can be described as based on the “reduction of complexi-ty” (“Komplexitätsreduktion”. This is one of the most important concepts in Niklas Luhmann’s work. It turns out that systems theory provides the specific key to interpret the novel.

  14. Does Refactoring of Test Smells Induce Fixing Flaky Tests?

    NARCIS (Netherlands)

    Palomba, F.; Zaidman, A.E.

    2017-01-01

    Regression testing is a core activity that allows developers to ensure that source code changes do not introduce bugs. An important prerequisite then is that test cases are deterministic. However, this is not always the case as some tests suffer from socalled flakiness. Flaky tests have serious

  15. Fuels and materials testing capabilities in Fast Flux Test Facility

    International Nuclear Information System (INIS)

    Baker, R.B.; Chastain, S.A.; Culley, G.E.; Ethridge, J.L.; Lovell, A.J.; Newland, D.J.; Pember, L.A.; Puigh, R.J.; Waltar, A.E.

    1989-01-01

    The Fast Flux Test Facility (FFTF) reactor, which started operating in 1982, is a 400 MWt sodium-cooled fast neutron reactor located in Hanford, Washington State, and operated by Westinghouse Hanford Co. under contract with U.S. Department of Energy. The reactor has a wide variety of functions for irradiation tests and special tests, and its major purpose is the irradiation of fuel and material for liquid metal reactor, nuclear reactor and space reactor projects. The review first describes major technical specifications and current conditions of the FFTF reactor. Then the plan for irradiation testing is outlined focusing on general features, fuel pin/assembly irradiation tests, and absorber irradiation tests. Assemblies for special tests include the material open test assembly (MOTA), fuel open test assembly (FOTA), closed loop in-reactor assembly (CLIRA), and other special fuel assemblies. An interim examination and maintenance cell (FFTF/IEM cell) and other hot cells are used for nondestructive/destructive tests and physical/mechanical properties test of material after irradiation. (N.K.)

  16. A test matrix sequencer for research test facility automation

    Science.gov (United States)

    Mccartney, Timothy P.; Emery, Edward F.

    1990-01-01

    The hardware and software configuration of a Test Matrix Sequencer, a general purpose test matrix profiler that was developed for research test facility automation at the NASA Lewis Research Center, is described. The system provides set points to controllers and contact closures to data systems during the course of a test. The Test Matrix Sequencer consists of a microprocessor controlled system which is operated from a personal computer. The software program, which is the main element of the overall system is interactive and menu driven with pop-up windows and help screens. Analog and digital input/output channels can be controlled from a personal computer using the software program. The Test Matrix Sequencer provides more efficient use of aeronautics test facilities by automating repetitive tasks that were once done manually.

  17. Irradiation effects test series, test IE-5. Test results report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Croucher, D. W.; Yackle, T. R.; Allison, C. M.; Ploger, S. A.

    1978-01-01

    Test IE-5, conducted in the Power Burst Facility at the Idaho National Engineering Laboratory, employed three 0.97-m long pressurized water reactor type fuel rods, fabricated from previously irradiated zircaloy-4 cladding and one similar rod fabricated from unirradiated cladding. The objectives of the test were to evaluate the influence of simulated fission products, cladding irradiation damage, and fuel rod internal pressure on pellet-cladding interaction during a power ramp and on fuel rod behavior during film boiling operation. The four rods were subjected to a preconditioning period, a power ramp to an average fuel rod peak power of 65 kW/m, and steady state operation for one hour at a coolant mass flux of 4880 kg/s-m/sup 2/ for each rod. After a flow reduction to 1800 kg/s-m/sup 2/, film boiling occurred on one rod. Additional flow reductions to 970 kg/s-m/sup 2/ produced film boiling on the three remaining fuel rods. Maximum time in film boiling was 80s. The rod having the highest initial internal pressure (8.3 MPa) failed 10s after the onset of film boiling. A second rod failed about 90s after reactor shutdown. The report contains a description of the experiment, the test conduct, test results, and results from the preliminary postirradiation examination. Calculations using a transient fuel rod behavior code are compared with the test results.

  18. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  19. Operational test report for LERF Basin 242AL-44 integrity test

    International Nuclear Information System (INIS)

    Galioto, T.M.

    1994-01-01

    This operational test report documents the results of LERF operational testing per operational test procedure (OTP) TFPE-WP-0231, ''LERF Basin Integrity Testing.'' The primary purpose of the OTP was to resolve test exceptions generated as a result of TFPE-WP-0184. The TOP was prepared and performed in accordance with WHC-SD-534-OTP-002, ''Operational Test Plan for the 242-A Evaporator Upgrades and the Liquid Effluent Retention Facility.'' WHC-S-086, ''Specification for Operational Testing of the Liquid Effluent Retention Facility, Basin Integrity Testing,'' identified the test requirements and acceptance criteria. The completed, signed-off test procedure is contained in Appendix A. The test log is contained in Appendix B. Section 2.1 describes all the test exceptions written during performance of the Operational Test Procedure. The test revisions generated during the testing are discussed in Section 2.2. The dispositioned test exception forms are contained in Appendix C

  20. NRC valve performance test program - check valve testing

    International Nuclear Information System (INIS)

    Jeanmougin, N.M.

    1987-01-01

    The Valve Performance Test Program addresses the current requirements for testing of pressure isolation valves (PIVs) in light water reactors. Leak rate monitoring is the current method used by operating commercial power plants to survey the condition of their PIVs. ETEC testing of three check valves (4-inch, 6-inch, and 12-inch nominal diameters) indicates that leak rate testing is not a reliable method for detecting impending valve failure. Acoustic emission monitoring of check valves shows promise as a method of detecting loosened internals damage. Future efforts will focus on evaluation of acoustic emission monitoring as a technique for determining check valve condition. Three gate valves also will be tested to evaluate whether the check valve results are applicable to gate type PIVs

  1. Test Anxiety, Computer-Adaptive Testing and the Common Core

    Science.gov (United States)

    Colwell, Nicole Makas

    2013-01-01

    This paper highlights the current findings and issues regarding the role of computer-adaptive testing in test anxiety. The computer-adaptive test (CAT) proposed by one of the Common Core consortia brings these issues to the forefront. Research has long indicated that test anxiety impairs student performance. More recent research indicates that…

  2. TESTING TESTS ON ACTIVE GALACTIC NUCLEI MICROVARIABILITY

    International Nuclear Information System (INIS)

    De Diego, Jose A.

    2010-01-01

    Literature on optical and infrared microvariability in active galactic nuclei (AGNs) reflects a diversity of statistical tests and strategies to detect tiny variations in the light curves of these sources. Comparison between the results obtained using different methodologies is difficult, and the pros and cons of each statistical method are often badly understood or even ignored. Even worse, improperly tested methodologies are becoming more and more common, and biased results may be misleading with regard to the origin of the AGN microvariability. This paper intends to point future research on AGN microvariability toward the use of powerful and well-tested statistical methodologies, providing a reference for choosing the best strategy to obtain unbiased results. Light curves monitoring has been simulated for quasars and for reference and comparison stars. Changes for the quasar light curves include both Gaussian fluctuations and linear variations. Simulated light curves have been analyzed using χ 2 tests, F tests for variances, one-way analyses of variance and C-statistics. Statistical Type I and Type II errors, which indicate the robustness and the power of the tests, have been obtained in each case. One-way analyses of variance and χ 2 prove to be powerful and robust estimators for microvariations, while the C-statistic is not a reliable methodology and its use should be avoided.

  3. Mononucleosis spot test

    Science.gov (United States)

    Monospot test; Heterophile antibody test; Heterophile agglutination test; Paul-Bunnell test; Forssman antibody test ... The mononucleosis spot test is done when symptoms of mononucleosis are ... Fatigue Fever Large spleen (possibly) Sore throat Tender ...

  4. Automated test data generation for branch testing using incremental

    Indian Academy of Sciences (India)

    Cost of software testing can be reduced by automated test data generation to find a minimal set of data that has maximum coverage. Search-based software testing (SBST) is one of the techniques recently used for automated testing task. SBST makes use of control flow graph (CFG) and meta-heuristic search algorithms to ...

  5. BWR Full Integral Simulation Test (FIST). Phase I test results

    International Nuclear Information System (INIS)

    Hwang, W.S.; Alamgir, M.; Sutherland, W.A.

    1984-09-01

    A new full height BWR system simulator has been built under the Full-Integral-Simulation-Test (FIST) program to investigate the system responses to various transients. The test program consists of two test phases. This report provides a summary, discussions, highlights and conclusions of the FIST Phase I tests. Eight matrix tests were conducted in the FIST Phase I. These tests have investigated the large break, small break and steamline break LOCA's, as well as natural circulation and power transients. Results and governing phenomena of each test have been evaluated and discussed in detail in this report. One of the FIST program objectives is to assess the TRAC code by comparisons with test data. Two pretest predictions made with TRACB02 are presented and compared with test data in this report

  6. Integrated Test and Evaluation (ITE) Flight Test Series 4

    Science.gov (United States)

    Marston, Michael

    2016-01-01

    The integrated Flight Test 4 (FT4) will gather data for the UAS researchers Sense and Avoid systems (referred to as Detect and Avoid in the RTCA SC 228 ToR) algorithms and pilot displays for candidate UAS systems in a relevant environment. The technical goals of FT4 are to: 1) perform end-to-end traffic encounter test of pilot guidance generated by DAA algorithms; 2) collect data to inform the initial Minimum Operational Performance Standards (MOPS) for Detect and Avoid systems. FT4 objectives and test infrastructure builds from previous UAS project simulations and flight tests. NASA Ames (ARC), NASA Armstrong (AFRC), and NASA Langley (LaRC) Research Centers will share responsibility for conducting the tests, each providing a test lab and critical functionality. UAS-NAS project support and participation on the 2014 flight test of ACAS Xu and DAA Self Separation (SS) significantly contributed to building up infrastructure and procedures for FT3 as well. The DAA Scripted flight test (FT4) will be conducted out of NASA Armstrong over an eight-week period beginning in April 2016.

  7. AST Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/asttest.html AST Test To use the sharing features on this page, please enable JavaScript. What is an AST Test? AST (aspartate aminotransferase) is an enzyme that is ...

  8. Chlamydia Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/chlamydiatest.html Chlamydia Test To use the sharing features on this page, please enable JavaScript. What is a Chlamydia Test? Chlamydia is one of the most common sexually ...

  9. Lipase Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/lipasetest.html Lipase Test To use the sharing features on this page, please enable JavaScript. What is a lipase test? Lipase is a type of protein made by ...

  10. Cortisol Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/labtests/cortisoltest.html Cortisol Test To use the sharing features on this page, please enable JavaScript. What is a Cortisol Test? Cortisol is a hormone that affects almost every ...

  11. Nuclear Fuel Test Rod Fabrication for Data Acquisition Test

    International Nuclear Information System (INIS)

    Joung, Chang-Young; Hong, Jin-Tae; Kim, Ka-Hye; Huh, Sung-Ho

    2014-01-01

    A nuclear fuel test rod must be fabricated with precise welding and assembly technologies, and confirmed for their soundness. Recently, we have developed various kinds of processing systems such as an orbital TIG welding system, a fiber laser welding system, an automated drilling system and a helium leak analyzer, which are able to fabricate the nuclear fuel test rods and rigs, and keep inspection systems to confirm the soundness of the nuclear fuel test rods and rids. The orbital TIG welding system can be used with two kinds of welding methods. One can perform the round welding for end-caps of a nuclear fuel test rod by an orbital head mounted in a low-pressure chamber. The other can do spot welding for a pin-hole of a nuclear fuel test rod in a high-pressure chamber to fill up helium gas of high pressure. The fiber laser welding system can weld cylindrical and 3 axis samples such as parts of a nuclear fuel test rod and instrumentation sensors which is moved by an index chuck and a 3 axis (X, Y, Z) servo stage controlled by the CNC program. To measure the real-time temperature change at the center of the nuclear fuel during the irradiation test, a thermocouple should be instrumented at that position. Therefore, a hole needs to be made at the center of fuel pellet to instrument the thermocouple. An automated drilling system can drill a fine hole into a fuel pellet without changing tools or breaking the work-piece. The helium leak analyzer (ASM-380 model of DEIXEN Co.) can check the leak of the nuclear fuel test rod filled with helium gas. This paper describes not only the assembly and fabrication methods used by the process systems, but also the results of the data acquisition test for the nuclear fuel test rod. A nuclear fuel test rod for the data acquisition test was fabricated using the welding and assembling echnologies acquired from previous tests

  12. Nuclear Fuel Test Rod Fabrication for Data Acquisition Test

    Energy Technology Data Exchange (ETDEWEB)

    Joung, Chang-Young; Hong, Jin-Tae; Kim, Ka-Hye; Huh, Sung-Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A nuclear fuel test rod must be fabricated with precise welding and assembly technologies, and confirmed for their soundness. Recently, we have developed various kinds of processing systems such as an orbital TIG welding system, a fiber laser welding system, an automated drilling system and a helium leak analyzer, which are able to fabricate the nuclear fuel test rods and rigs, and keep inspection systems to confirm the soundness of the nuclear fuel test rods and rids. The orbital TIG welding system can be used with two kinds of welding methods. One can perform the round welding for end-caps of a nuclear fuel test rod by an orbital head mounted in a low-pressure chamber. The other can do spot welding for a pin-hole of a nuclear fuel test rod in a high-pressure chamber to fill up helium gas of high pressure. The fiber laser welding system can weld cylindrical and 3 axis samples such as parts of a nuclear fuel test rod and instrumentation sensors which is moved by an index chuck and a 3 axis (X, Y, Z) servo stage controlled by the CNC program. To measure the real-time temperature change at the center of the nuclear fuel during the irradiation test, a thermocouple should be instrumented at that position. Therefore, a hole needs to be made at the center of fuel pellet to instrument the thermocouple. An automated drilling system can drill a fine hole into a fuel pellet without changing tools or breaking the work-piece. The helium leak analyzer (ASM-380 model of DEIXEN Co.) can check the leak of the nuclear fuel test rod filled with helium gas. This paper describes not only the assembly and fabrication methods used by the process systems, but also the results of the data acquisition test for the nuclear fuel test rod. A nuclear fuel test rod for the data acquisition test was fabricated using the welding and assembling echnologies acquired from previous tests.

  13. AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)

    International Nuclear Information System (INIS)

    THOMAS, W.K.

    2000-01-01

    Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field

  14. Light Duty Utility Arm system pre-operational (cold test) test plan

    International Nuclear Information System (INIS)

    Bennett, K.L.

    1995-01-01

    The Light Duty Utility (LDUA) Cold Test Facility, located in the Hanford 400 Area, will be used to support cold testing (pre- operational tests) of LDUA subsystems. Pre-operational testing is composed of subsystem development testing and rework activities, and integrated system qualification testing. Qualification testing will be conducted once development work is complete and documentation is under configuration control. Operational (hot) testing of the LDUA system will follow the testing covered in this plan and will be covered in a separate test plan

  15. Coccidioides precipitin test

    Science.gov (United States)

    Coccidioidomycosis antibody test; Coccidioides blood test; Valley fever blood test ... There is no special preparation for the test. ... The precipitin test is one of several tests that can be done to determine if you are infected with coccidioides, which ...

  16. Syphilis Test

    Science.gov (United States)

    ... Genetic Tests for Targeted Cancer Therapy Glucose Tests Gonorrhea Testing Gram Stain Growth Hormone Haptoglobin hCG Pregnancy ... treated for another sexually transmitted disease , such as gonorrhea Is pregnant, during the first prenatal visit and ...

  17. New Graphical Methods and Test Statistics for Testing Composite Normality

    Directory of Open Access Journals (Sweden)

    Marc S. Paolella

    2015-07-01

    Full Text Available Several graphical methods for testing univariate composite normality from an i.i.d. sample are presented. They are endowed with correct simultaneous error bounds and yield size-correct tests. As all are based on the empirical CDF, they are also consistent for all alternatives. For one test, called the modified stabilized probability test, or MSP, a highly simplified computational method is derived, which delivers the test statistic and also a highly accurate p-value approximation, essentially instantaneously. The MSP test is demonstrated to have higher power against asymmetric alternatives than the well-known and powerful Jarque-Bera test. A further size-correct test, based on combining two test statistics, is shown to have yet higher power. The methodology employed is fully general and can be applied to any i.i.d. univariate continuous distribution setting.

  18. Nuclear stress test

    Science.gov (United States)

    ... Persantine stress test; Thallium stress test; Stress test - nuclear; Adenosine stress test; Regadenoson stress test; CAD - nuclear stress; Coronary artery disease - nuclear stress; Angina - nuclear ...

  19. Pharmacogenomic Testing

    Science.gov (United States)

    ... your family Plan for the future Insurance and financial planning Transition for children Emergency preparedness Testing & Services Testing ... Support Genetic Disease Information Find a Support Group Financial Planning Who Should I Tell? Genetic Testing & Counseling Compensation ...

  20. Predictive Testing

    Science.gov (United States)

    ... your family Plan for the future Insurance and financial planning Transition for children Emergency preparedness Testing & Services Testing ... Support Genetic Disease Information Find a Support Group Financial Planning Who Should I Tell? Genetic Testing & Counseling Compensation ...

  1. Nationale Test

    DEFF Research Database (Denmark)

    2009-01-01

    Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv......Hvad er egentlig formålet med de nationale test? Bliver eleverne klogere af at blive testet? Og er der en sammenhæng mellem bandekrig og nationale test? Fysisk medie: dpu.dk/tv...

  2. A computer-controlled automated test system for fatigue and fracture testing

    International Nuclear Information System (INIS)

    Nanstad, R.K.; Alexander, D.J.; Swain, R.L.; Hutton, J.T.; Thomas, D.L.

    1989-01-01

    A computer-controlled system consisting of a servohydraulic test machine, an in-house designed test controller, and a desktop computer has been developed for performing automated fracture toughness and fatigue crack growth testing both in the laboratory and in hot cells for remote testing of irradiated specimens. Both unloading compliance and dc-potential drop can be used to monitor crack growth. The test controller includes a dc-current supply programmer, a function generator for driving the servohydraulic test machine to required test outputs, five measurement channels (each consisting of low-pass filter, track/hold amplifier, and 16-bit analog-to-digital converter), and digital logic for various control and data multiplexing functions. The test controller connects to the computer via a 16-bit wide photo-isolated bidirectional bus. The computer, a Hewlett-Packard series 200/300, inputs specimen and test parameters from the operator, configures the test controller, stores test data from the test controller in memory, does preliminary analysis during the test, and records sensor calibrations, specimen and test parameters, and test data on flexible diskette for later recall and analysis with measured initial and final crack length information. During the test, the operator can change test parameters as necessary. 24 refs., 6 figs

  3. Heart failure - tests

    Science.gov (United States)

    CHF - tests; Congestive heart failure - tests; Cardiomyopathy - tests; HF - tests ... the best test to: Identify which type of heart failure (systolic, diastolic, valvular) Monitor your heart failure and ...

  4. 5-HIAA Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  5. Uric Acid Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  6. Direct Antiglobulin Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  7. CK-MB Test

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  8. Understanding Your Tests

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  9. Myasthenia Gravis Tests

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  10. The comparison of the unit test tools JUnit and TestNG

    OpenAIRE

    Šarkanj, Aleš

    2011-01-01

    Testing holds an important role in developing software. It is a process ensuring software works as expected. An important part of testing is unit testing as the basic testing level. The purpose of this thesis is comparing JUnit and TestNG, two of the most popular unit testing tools in Java. In the first part we will present testing and its purpose within software development. We will also present the basic terminology and levels of testing. Further on the area of unit testing will be pr...

  11. The test-retest reliability and criterion validity of a high-intensity, netball-specific circuit test: The Net-Test.

    Science.gov (United States)

    Mungovan, Sean F; Peralta, Paula J; Gass, Gregory C; Scanlan, Aaron T

    2018-04-12

    To examine the test-retest reliability and criterion validity of a high-intensity, netball-specific fitness test. Repeated measures, within-subject design. Eighteen female netball players competing in an international competition completed a trial of the Net-Test, which consists of 14 timed netball-specific movements. Players also completed a series of netball-relevant criterion fitness tests. Ten players completed an additional Net-Test trial one week later to assess test-retest reliability using intraclass correlation coefficient (ICC), typical error of measurement (TEM), and coefficient of variation (CV). The typical error of estimate expressed as CV and Pearson correlations were calculated between each criterion test and Net-Test performance to assess criterion validity. Five movements during the Net-Test displayed moderate ICC (0.84-0.90) and two movements displayed high ICC (0.91-0.93). Seven movements and heart rate taken during the Net-Test held low CV (Test possessed low CV and significant (pTest possesses acceptable reliability for the assessment of netball fitness. Further, the high criterion validity for the Net-Test suggests a range of important netball-specific fitness elements are assessed in combination. Copyright © 2018 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  12. An innovative approach for testing bioinformatics programs using metamorphic testing

    Directory of Open Access Journals (Sweden)

    Liu Huai

    2009-01-01

    Full Text Available Abstract Background Recent advances in experimental and computational technologies have fueled the development of many sophisticated bioinformatics programs. The correctness of such programs is crucial as incorrectly computed results may lead to wrong biological conclusion or misguide downstream experimentation. Common software testing procedures involve executing the target program with a set of test inputs and then verifying the correctness of the test outputs. However, due to the complexity of many bioinformatics programs, it is often difficult to verify the correctness of the test outputs. Therefore our ability to perform systematic software testing is greatly hindered. Results We propose to use a novel software testing technique, metamorphic testing (MT, to test a range of bioinformatics programs. Instead of requiring a mechanism to verify whether an individual test output is correct, the MT technique verifies whether a pair of test outputs conform to a set of domain specific properties, called metamorphic relations (MRs, thus greatly increases the number and variety of test cases that can be applied. To demonstrate how MT is used in practice, we applied MT to test two open-source bioinformatics programs, namely GNLab and SeqMap. In particular we show that MT is simple to implement, and is effective in detecting faults in a real-life program and some artificially fault-seeded programs. Further, we discuss how MT can be applied to test programs from various domains of bioinformatics. Conclusion This paper describes the application of a simple, effective and automated technique to systematically test a range of bioinformatics programs. We show how MT can be implemented in practice through two real-life case studies. Since many bioinformatics programs, particularly those for large scale simulation and data analysis, are hard to test systematically, their developers may benefit from using MT as part of the testing strategy. Therefore our work

  13. Convergent validity test, construct validity test and external validity test of the David Liberman algorithm

    Directory of Open Access Journals (Sweden)

    David Maldavsky

    2013-08-01

    Full Text Available The author first exposes a complement of a previous test about convergent validity, then a construct validity test and finally an external validity test of the David Liberman algorithm.  The first part of the paper focused on a complementary aspect, the differential sensitivity of the DLA 1 in an external comparison (to other methods, and 2 in an internal comparison (between two ways of using the same method, the DLA.  The construct validity test exposes the concepts underlined to DLA, their operationalization and some corrections emerging from several empirical studies we carried out.  The external validity test examines the possibility of using the investigation of a single case and its relation with the investigation of a more extended sample.

  14. Parametric Sensitivity Tests- European PEM Fuel Cell Stack Test Procedures

    DEFF Research Database (Denmark)

    Araya, Samuel Simon; Andreasen, Søren Juhl; Kær, Søren Knudsen

    2014-01-01

    performed based on test procedures proposed by a European project, Stack-Test. The sensitivity of a Nafion-based low temperature PEMFC stack’s performance to parametric changes was the main objective of the tests. Four crucial parameters for fuel cell operation were chosen; relative humidity, temperature......As fuel cells are increasingly commercialized for various applications, harmonized and industry-relevant test procedures are necessary to benchmark tests and to ensure comparability of stack performance results from different parties. This paper reports the results of parametric sensitivity tests......, pressure, and stoichiometry at varying current density. Furthermore, procedures for polarization curve recording were also tested both in ascending and descending current directions....

  15. Analysing Test-Takers’ Views on a Computer-Based Speaking Test

    Directory of Open Access Journals (Sweden)

    Marian Amengual-Pizarro

    2017-11-01

    Full Text Available This study examines test-takers’ views on a computer-delivered speaking test in order to investigate the aspects they consider most relevant in technology-based oral assessment, and to explore the main advantages and disadvantages computer-based tests may offer as compared to face-to-face speaking tests. A small-scale open questionnaire was administered to 80 test-takers who took the APTIS speaking test at the Universidad de Alcalá in April 2016. Results reveal that examinees believe computer-based tests provide a valid measure of oral competence in English and are considered to be an adequate method for the assessment of speaking. Interestingly, the data suggest that personal characteristics of test-takers seem to play a key role in deciding upon the most suitable and reliable delivery mode.

  16. Heavy Metal Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/heavymetalbloodtest.html Heavy Metal Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Heavy Metal Blood Test? A heavy metal blood test ...

  17. Lipoprotein (a) Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/lipoproteinabloodtest.html Lipoprotein (a) Blood Test To use the sharing features ... this page, please enable JavaScript. What is a Lipoprotein (a) Blood Test? A lipoprotein (a) test measures ...

  18. Injecting Errors for Testing Built-In Test Software

    Science.gov (United States)

    Gender, Thomas K.; Chow, James

    2010-01-01

    Two algorithms have been conceived to enable automated, thorough testing of Built-in test (BIT) software. The first algorithm applies to BIT routines that define pass/fail criteria based on values of data read from such hardware devices as memories, input ports, or registers. This algorithm simulates effects of errors in a device under test by (1) intercepting data from the device and (2) performing AND operations between the data and the data mask specific to the device. This operation yields values not expected by the BIT routine. This algorithm entails very small, permanent instrumentation of the software under test (SUT) for performing the AND operations. The second algorithm applies to BIT programs that provide services to users application programs via commands or callable interfaces and requires a capability for test-driver software to read and write the memory used in execution of the SUT. This algorithm identifies all SUT code execution addresses where errors are to be injected, then temporarily replaces the code at those addresses with small test code sequences to inject latent severe errors, then determines whether, as desired, the SUT detects the errors and recovers

  19. HYBRID DATA APPROACH FOR SELECTING EFFECTIVE TEST CASES DURING THE REGRESSION TESTING

    OpenAIRE

    Mohan, M.; Shrimali, Tarun

    2017-01-01

    In the software industry, software testing becomes more important in the entire software development life cycle. Software testing is one of the fundamental components of software quality assurances. Software Testing Life Cycle (STLC)is a process involved in testing the complete software, which includes Regression Testing, Unit Testing, Smoke Testing, Integration Testing, Interface Testing, System Testing & etc. In the STLC of Regression testing, test case selection is one of the most importan...

  20. Anion Gap Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... https://medlineplus.gov/labtests/aniongapbloodtest.html Anion Gap Blood Test To use the sharing features on this page, please enable JavaScript. What is an Anion Gap Blood Test? An anion gap blood test is a way ...

  1. Testing experience with fast flux test facility

    International Nuclear Information System (INIS)

    Noordhoff, B.H.; McGough, C.B.; Nolan, J.E.

    1975-01-01

    Early FFTF project planning emphasized partial and full-scale testing of major reactor and plant prototype components under expected environmental conditions, excluding radiation fields. Confirmation of component performance during FFTF service was considered essential before actual FFTF startup, to provide increased assurance against FFTF startup delays or operational difficulties and downtime. Several new sodium facilities were constructed, and confirmation tests on the prototype components are now in progress. Test conditions and results to date are reported for the primary pump, intermediate heat exchanger, sodium-to-air dump heat exchanger, large and small sodium valves, purification cold trap, in-vessel handling machine, instrument tree, core restraint, control rod system, low-level flux monitor, closed loop ex-vessel machine, refueling equipment, and selected maintenance equipment. The significance and contribution of these tests to the FFTF and Liquid Metal Fast Breeder Reactor (LMFBR) program are summarized. (U.S.)

  2. The hardness test: a real mechanical test

    International Nuclear Information System (INIS)

    Rezakhanlou, R.

    1993-02-01

    During the service life, the mechanical properties of the PWR components change. It is necessary to determine precisely this evolution, but it is not always possible to draw a sample with the adequate size for the characterization. For this latter case we intend to calculate the stress-strain curve of a material from a hardness test results, because it is appropriate for testing on site and do not need any particular sample shape. This paper is the first bibliographical part of a larger study on the relation between the values measured during a hardness test (applied load, indentation diameter) and the mechanical properties of a solid obtained by a traction test. We have treated the problem within the general setting of two solids in contact. Thus, we expose general elastic, elasto-plastic and plastic models describing the indentation of a solid by a rigid indenter

  3. Drug Testing

    Science.gov (United States)

    ... testing, substance abuse testing, toxicology screen, tox screen, sports doping tests What is it used for? Drug screening is used to find out whether or not a person has taken a certain drug or drugs. It ... Sports organizations. Professional and collegiate athletes usually need to ...

  4. HIV Testing

    Science.gov (United States)

    ... Abroad Treatment Basic Statistics Get Tested Find an HIV testing site near you. Enter ZIP code or city Follow HIV/AIDS CDC HIV CDC HIV/AIDS See RSS | ... All Collapse All Should I get tested for HIV? CDC recommends that everyone between the ages of ...

  5. Testing power-law cross-correlations: Rescaled covariance test

    Czech Academy of Sciences Publication Activity Database

    Krištoufek, Ladislav

    2013-01-01

    Roč. 86, č. 10 (2013), 418-1-418-15 ISSN 1434-6028 R&D Projects: GA ČR GA402/09/0965 Institutional support: RVO:67985556 Keywords : power-law cross-correlations * testing * long-term memory Subject RIV: AH - Economics Impact factor: 1.463, year: 2013 http://library.utia.cas.cz/separaty/2013/E/kristoufek-testing power-law cross-correlations rescaled covariance test.pdf

  6. Ethnic Comparisons in HIV Testing Attitudes, HIV Testing, and Predictors of HIV Testing Among Black and White College Students.

    Science.gov (United States)

    Moore, Melanie P; Javier, Sarah J; Abrams, Jasmine A; McGann, Amanda Wattenmaker; Belgrave, Faye Z

    2017-08-01

    This study's primary aim was to examine ethnic differences in predictors of HIV testing among Black and White college students. We also examined ethnic differences in sexual risk behaviors and attitudes toward the importance of HIV testing. An analytic sample of 126 Black and 617 White undergraduatestudents aged 18-24 were analyzed for a subset of responses on the American College Health Association-National College Health Assessment II (ACHA-NCHA II) (2012) pertaining to HIV testing, attitudes about the importance of HIV testing, and sexual risk behaviors. Predictors of HIV testing behavior were analyzed using logistic regression. t tests and chi-square tests were performed to access differences in HIV test history, testing attitudes, and sexual risk behaviors. Black students had more positive attitudes toward testing and were more likely to have been tested for HIV compared to White students. A greater number of sexual partners and more positive HIV testing attitudes were significant predictors of HIV testing among White students, whereas relationship status predicted testing among Black students. Older age and history of ever having sex were significant predictors of HIV testing for both groups. There were no significant differences between groups in number of sexual partners or self-reports in history of sexual experience (oral, vaginal, or anal). Factors that influence HIV testing may differ across racial/ethnic groups. Findings support the need to consider racial/ethnic differences in predictors of HIV testing during the development and tailoring of HIV testing prevention initiatives targeting college students.

  7. LOBI test BT-15/BT-16 pre-test calculation

    International Nuclear Information System (INIS)

    Holmes, B.J.

    1991-03-01

    LOBI is a higher pressure, electrically heated integral system facility simulating a KWU 1300 MW PWR scaled 1:712 by volume, although full scale has been maintained in the vertical direction. In order to complete the test programme before the facility is closed in 1991 a number of tests have been performed in tandem, where the test procedures were compatible. BT-15/BT-16 is one such composite test. In their original form both tests BT-15 and BT-16 simulated a loss of main feedwater transient with delayed auxiliary feedwater injection, with the pumps running in BT-15 and tripped in BT-16. The aim of each test was to investigate the loss of primary/secondary heat transfer as the steam generator secondary sides boiled down, and the subsequent recovery of heat transfer as the auxiliary feedwater was tripped on. Due to a re-scheduling of the test programme there was insufficient time to perform sensitivity studies and so only one, base case, calculation is presented. (author)

  8. Moisture related test protocols for HVS testing

    CSIR Research Space (South Africa)

    Denneman, E

    2008-10-01

    Full Text Available outcomes of HVS tests where the moisture condition of the pavement or specific layers in the pavement is under investigation for a specific test. Practical guidance is then provided on the potential systems (how to manage the moisture – hardware) as well...

  9. The Caledonian face test: A new test of face discrimination.

    Science.gov (United States)

    Logan, Andrew J; Wilkinson, Frances; Wilson, Hugh R; Gordon, Gael E; Loffler, Gunter

    2016-02-01

    This study aimed to develop a clinical test of face perception which is applicable to a wide range of patients and can capture normal variability. The Caledonian face test utilises synthetic faces which combine simplicity with sufficient realism to permit individual identification. Face discrimination thresholds (i.e. minimum difference between faces required for accurate discrimination) were determined in an "odd-one-out" task. The difference between faces was controlled by an adaptive QUEST procedure. A broad range of face discrimination sensitivity was determined from a group (N=52) of young adults (mean 5.75%; SD 1.18; range 3.33-8.84%). The test is fast (3-4 min), repeatable (test-re-test r(2)=0.795) and demonstrates a significant inversion effect. The potential to identify impairments of face discrimination was evaluated by testing LM who reported a lifelong difficulty with face perception. While LM's impairment for two established face tests was close to the criterion for significance (Z-scores of -2.20 and -2.27) for the Caledonian face test, her Z-score was -7.26, implying a more than threefold higher sensitivity. The new face test provides a quantifiable and repeatable assessment of face discrimination ability. The enhanced sensitivity suggests that the Caledonian face test may be capable of detecting more subtle impairments of face perception than available tests. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Materials testing 1985

    International Nuclear Information System (INIS)

    1985-01-01

    The following subjects were dealt with at the meeting: Testing with vibration loads; Hardness testing; Calibration of test devices and equipment; Test technique for compound materials; Vibration strength testing and expense of experiments; Solving problems in introducing forces into samples and components and process of ambulant materials testing. There are 17 separate abstracts from among 43 lectures. (orig./PW) [de

  11. Pragmatics of Testing

    Directory of Open Access Journals (Sweden)

    İsmail Fırat ALTAY

    2007-10-01

    Full Text Available Teaching of a language is a very complicated issue and testing is anindispensable part of this matter. Thanks to testing teachers can assess efficiency ofteaching and learning atmosphere, and can get feedback about their learners. In order torealize this, a test should have some qualifications. One of these qualifications is aboutpragmatics. This paper aims at explaining what makes a test pragmatic and howpragmatic tests can be formed. So, examples of pragmatic tests of different types arepresented with explanations. Their pragmatic components and nature are focused on bygiving example test items on the problematic area of test questions prepared. Finally,the writer states his last words by making further comments and explanations onpragmatics of testing in the conclusion part.

  12. Numerical simulations of rubber bearing tests and shaking table tests

    International Nuclear Information System (INIS)

    Hirata, K.; Matsuda, A.; Yabana, S.

    2002-01-01

    Test data concerning rubber bearing tests and shaking table tests of base-isolated model conducted by CRIEPI are provided to the participants of Coordinated Research Program (CRP) on 'Intercomparison of Analysis Methods for predicting the behaviour of Seismically Isolated Nuclear Structure', which is organized by International Atomic Energy Agency (IAEA), for the comparison study of numerical simulation of base-isolated structure. In this paper outlines of the test data provided and the numerical simulations of bearing tests and shaking table tests are described. Using computer code ABAQUS, numerical simulations of rubber bearing tests are conducted for NRBs, LRBs (data provided by CRIEPI) and for HDRs (data provided by ENEA/ENEL and KAERI). Several strain energy functions are specified according to the rubber material test corresponding to each rubber bearing. As for lead plug material in LRB, mechanical characteristics are reevaluated and are made use of. Simulation results for these rubber bearings show satisfactory agreement with the test results. Shaking table test conducted by CRIEPI is of a base isolated rigid mass supported by LRB. Acceleration time histories, displacement time histories of the isolators as well as cyclic loading test data of the LRB used for the shaking table test are provided to the participants of the CRP. Simulations of shaking table tests are conducted for this rigid mass, and also for the steel frame model which is conducted by ENEL/ENEA. In the simulation of the rigid mass model test, where LRBs are used, isolators are modeled either by bilinear model or polylinear model. In both cases of modeling of isolators, simulation results show good agreement with the test results. In the case of the steel frame model, where HDRs are used as isolators, bilinear model and polylinear model are also used for modeling isolators. The response of the model is simulated comparatively well in the low frequency range of the floor response, however, in

  13. Crippling load test of Budd Pioneer Car 244, test 3.

    Science.gov (United States)

    2013-04-01

    This report summarizes Test 3, a crippling load test on Budd Pioneer Car 244, conducted on June 28, 2011. Before the crippling load test, Transportation Technology Center, Inc., conducted two 800,000-pound (lb) quasi-static tests on Car 244 in accord...

  14. Test-Taking Strategies in L2 Assessment: The Test of English for International Communication Speaking Test.

    Science.gov (United States)

    Huang, Heng-Tsung Danny

    2016-08-01

    This research explored the test-taking strategies associated with the Test of English for International Communication Speaking Test (TOEIC-S) and their relationship with test performance. Capitalizing on two sets of TOEIC-S and a custom-made strategy inventory, the researcher collected data from a total of 215 Taiwanese English learners consisting of 84 males and 131 females with an average age of 20.1 years (SD = 2.6). Quantitative data analysis gave rise to three major findings. First, TOEIC-S test-taking strategy use constituted a multi-faceted construct that involved multiple types of strategic behaviors. Second, these strategic behaviors matched those allowing test-takers to communicate both in real life and in the workplace. Third, communication strategy use and cognitive strategy use both contributed significantly to TOEIC-S performance. © The Author(s) 2016.

  15. Aerospace Structures Test Facility Environmental Test Chambers (ETC)

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The ETCs test the structural integrity of aerospace structures in representative operating temperatures and aerodynamic load distributions. The test article...

  16. Goodness of Fit Test and Test of Independence by Entropy

    Directory of Open Access Journals (Sweden)

    M. Sharifdoost

    2009-06-01

    Full Text Available To test whether a set of data has a specific distribution or not, we can use the goodness of fit test. This test can be done by one of Pearson X 2 -statistic or the likelihood ratio statistic G 2 , which are asymptotically equal, and also by using the Kolmogorov-Smirnov statistic in continuous distributions. In this paper, we introduce a new test statistic for goodness of fit test which is based on entropy distance, and which can be applied for large sample sizes. We compare this new statistic with the classical test statistics X 2 , G 2 , and Tn by some simulation studies. We conclude that the new statistic is more sensitive than the usual statistics to the rejection of distributions which are almost closed to the desired distribution. Also for testing independence, a new test statistic based on mutual information is introduced

  17. Endurance test for IR rig for RI production assembly (test procedure)

    International Nuclear Information System (INIS)

    Chung, Heung June; Ryu, Jeong Soo

    2000-08-01

    This test procedure details the test loop, test method, and test procedure for pressure drop, vibration and endurance test of IR Rig for RI production. From the pressure drop test, the hydraulic design requirements of the capsule are verified. HANARO limit condition is checked and the compatibility with HANARO core is verified. From flow induced vibration test vibration frequency and displacement are investigated. The wear of IR Rig is investigated through endurance test, and these data are used to evaluate the expected wear at maximum resident time of the IR Rig for RI production

  18. Summary of ALSEP Test Loop Solvent Irradiation Testing

    Energy Technology Data Exchange (ETDEWEB)

    Peterman, Dean Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Olson, Lonnie Gene [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    Separating the minor actinide elements (americium and curium) from the fission product lanthanides is an important step in closing the nuclear fuel cycle. Isolating the minor actinides will allow transmuting them to short lived or stable isotopes in fast reactors, thereby reducing the long-term hazard associated with these elements. The Actinide Lanthanide Separation Process (ALSEP) is being developed by the DOE-NE Material Recovery and Waste Form Development Campaign to accomplish this separation with a single process. To develop a fundamental understanding of the solvent degradation mechanisms for the ALSEP Process, testing was performed in the INL Radiolysis/Hydrolysis Test Loop for the extraction section of the ALSEP flowsheet. This work culminated in the completion of the level two milestone (M2FT-16IN030102021) "Complete ALSEP test loop solvent irradiation test.” This report summarizes the testing performed and the impact of radiation on the ALSEP Process performance as a function of dose.

  19. Mollusc reproductive toxicity tests - Development and validation of test guidelines

    DEFF Research Database (Denmark)

    Ducrot, Virginie; Holbech, Henrik; Kinnberg, Karin Lund

    . Draft standard operating procedures (SOPs) have been designed based upon literature and expert knowledge from project partners. Pre-validation studies have been implemented to validate the proposed test conditions and identify issues in performing the SOPs and analyzing test results. Pre-validation work......The Organisation for Economic Cooperation and Development is promoting the development and validation of mollusc toxicity tests within its test guidelines programme, eventually aiming for the standardization of mollusc apical toxicity tests. Through collaborative work between academia, industry...... and stakeholders, this study aims to develop innovative partial life-cycle tests on the reproduction of the freshwater gastropods Potamopyrgus antipodarum and Lymnaea stagnalis, which are relevant candidate species for the standardization of mollusc apical toxicity tests assessing reprotoxic effects of chemicals...

  20. [Using projective tests in forensic psychiatry may lead to wrong conclusions. Only empirically tested tests should be used].

    Science.gov (United States)

    Trygg, L; Dåderman, A M; Wiklund, N; Meurling, A W; Lindgren, M; Lidberg, L; Levander, S

    2001-06-27

    The use of projective and psychometric psychological tests at the Department of Forensic Psychiatry in Stockholm (Huddinge), Sweden, was studied for a population of 60 men, including many patients with neuropsychological disabilities and multiple psychiatric disorders. The results showed that the use of projective tests like Rorschach, Object Relations Test, and House-Tree-Person was more frequent than the use of objective psychometric tests. Neuropsychological test batteries like the Halstead-Reitan Neuropsychological Test Battery or Luria-Nebraska Neuropsychological Battery were not used. The majority of patients were, however, assessed by intelligence scales like the WAIS-R. The questionable reliability and validity of the projective tests, and the risk of subjective interpretations, raise a problem when used in a forensic setting, since the courts' decisions about a sentence to prison or psychiatric care is based on the forensic psychiatric assessment. The use of objective psychometric neuropsychological tests and personality tests is recommended.

  1. VDRL test

    Science.gov (United States)

    ... confirmed with another blood test to make the diagnosis of syphilis. Normal value ranges may vary slightly among different ... broken) Alternative Names Venereal disease research ... laboratory test (VDRL) – serum. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. St Louis, MO: Elsevier Saunders; ...

  2. Analog automatic test pattern generation for quasi-static structural test.

    NARCIS (Netherlands)

    Zjajo, A.; Pineda de Gyvez, J.

    2009-01-01

    A new approach for structural, fault-oriented analog test generation methodology to test for the presence of manufacturing-related defects is proposed. The output of the test generator consists of optimized test stimuli, fault coverage and sampling instants that are sufficient to detect the failure

  3. Multiple Choice Testing and the Retrieval Hypothesis of the Testing Effect

    Science.gov (United States)

    Sensenig, Amanda E.

    2010-01-01

    Taking a test often leads to enhanced later memory for the tested information, a phenomenon known as the "testing effect". This memory advantage has been reliably demonstrated with recall tests but not multiple choice tests. One potential explanation for this finding is that multiple choice tests do not rely on retrieval processes to the same…

  4. CSF-VDRL test

    Science.gov (United States)

    ... test - CSF; Neurosyphilis - VDRL Images CSF test for syphilis References Chernecky CC, Berger BJ. Venereal disease research laboratory test (VDRL), test, cerebrospinal fluid – specimen. In: Chernecky CC, Berger BJ, eds. Laboratory Tests and Diagnostic Procedures . 6th ed. St Louis, MO: Elsevier Saunders; ...

  5. Relay test program

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.; Kunkel, C.; Shteyngart, S.

    1994-02-01

    This report presents the results of a relay test program conducted by Brookhaven National Laboratory (BNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC). The program is a continuation of an earlier test program the results of which were published in NUREG/CR-4867. The current program was carried out in two phases: electrical testing and vibration testing. The objective was primarily to focus on the electrical discontinuity or continuity of relays and circuit breaker tripping mechanisms subjected to electrical pulses and vibration loads. The electrical testing was conducted by KEMA-Powertest Company and the vibration testing was performed at Wyle Laboratories, Huntsville, Alabama. This report discusses the test procedures, presents the test data, includes an analysis of the data and provides recommendations regarding reliable relay testing

  6. Gas Test Loop Booster Fuel Hydraulic Testing

    International Nuclear Information System (INIS)

    Gas Test Loop Hydraulic Testing Staff

    2006-01-01

    The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3

  7. Gas Test Loop Booster Fuel Hydraulic Testing

    Energy Technology Data Exchange (ETDEWEB)

    Gas Test Loop Hydraulic Testing Staff

    2006-09-01

    The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3.

  8. Rise-to-power test in High Temperature Engineering Test Reactor. Test progress and summary of test results up to 30 MW of reactor thermal power

    International Nuclear Information System (INIS)

    Nakagawa, Shigeaki; Fujimoto, Nozomu; Shimakawa, Satoshi

    2002-08-01

    The High Temperature Engineering Test Reactor (HTTR) is a graphite moderated and gas cooled reactor with the thermal power of 30 MW and the reactor outlet coolant temperature of 850degC/950degC. Rise-to-power test in the HTTR was performed from April 23rd to June 6th in 2000 as phase 1 test up to 10 MW in the rated operation mode, from January 29th to March 1st in 2001 as phase 2 test up to 20 MW in the rated operation mode and from April 14th to June 8th in 2001 as phase 3 test up to 20 MW in the high temperature test the mechanism of the reactor outlet coolant temperature becomes 850degC at 30 MW in the rated operation mode and 950degC in the high temperature test operation mode. Phase 4 rise-to-power test to achieve the thermal reactor power of 30 MW started on October 23rd in 2001. On December 7th in 2001 it was confirmed that the thermal reactor power and the reactor outlet coolant temperature reached to 30 MW and 850degC respectively in the single loaded operation mode in which only the primary pressurized water cooler is operating. Phase 4 test was performed until March 6th in 2002. JAERI (Japan Atomic Energy Research Institute) obtained the certificate of the pre-operation test from MEXT (Ministry of Education Culture Sports Science and Technology) after all the pre-operation tests by MEXT were passed successfully with the reactor transient test at an abnormal event as a final pre-operation test. From the test results of the rise-up-power test up to 30 MW in the rated operation mode, performance of the reactor and cooling system were confirmed, and it was also confirmed that an operation of reactor facility can be performed safely. Some problems to be solved were found through the tests. By solving them, the reactor operation with the reactor outlet coolant temperature of 950degC will be achievable. (author)

  9. Experimental test results of multi-channel test rig of T1 test section, 5

    International Nuclear Information System (INIS)

    Hino, Ryutaro; Takase, Kazuyuki; Miyamoto, Yoshiaki

    1990-09-01

    Channel blockage test on a fuel column of the high temperature engineering test reactor (HTTR) has been performed under the helium gas atmosphere at a high temperature and a high pressure in order to obtain safety data on flow rate and temperature distributions in the fuel column with the multi-channel test rig of the fuel stack test section (T 1 ) in HENDEL. In the test, one of 12 fuel channels was blockaded to 90% of flow area at the channel inlet. Experimental results showed that the helium gas flow rate in the blockaded channel was 28%∼33% lower than the average flow rate for Reynolds number from 2300 to 14000 in isothermal flow. When simulated fuel rods were heated, the flow rate in the blockaded channel did not decrease down in comparison with the isothermal flow. This is due to that the heat generated in the fuel rods conducts to the other fuel channels in graphite fuel blocks, so that accelerated pressure losses in the fuel channels change with helium gas temperatures. (author)

  10. CANFLEX fuel bundle cross-flow endurance test (test report)

    International Nuclear Information System (INIS)

    Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D.

    1997-04-01

    As part of the normal refuelling sequence of CANDU nuclear reactor, both new and irradiated bundles can be parked in the cross-flow region of the liner tubes. This situation occurs normally for a few minutes. The fuel bundle which is subjected to the cross-flow should be capable of withstanding the consequences of cross flow for normal periods, and maintain its mechanical integrity. The cross-flow endurance test was conducted for CANFLEX bundle, latest developed nuclear fuel, at CANDU-Hot Test Loop. The test was carried out during 4 hours at the inlet cross-flow region. After the test, the bundle successfully met all acceptance criteria after the 4 hours cross-flow test. (author). 2 refs., 3 tabs

  11. CANFLEX fuel bundle cross-flow endurance test (test report)

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D.

    1997-04-01

    As part of the normal refuelling sequence of CANDU nuclear reactor, both new and irradiated bundles can be parked in the cross-flow region of the liner tubes. This situation occurs normally for a few minutes. The fuel bundle which is subjected to the cross-flow should be capable of withstanding the consequences of cross flow for normal periods, and maintain its mechanical integrity. The cross-flow endurance test was conducted for CANFLEX bundle, latest developed nuclear fuel, at CANDU-Hot Test Loop. The test was carried out during 4 hours at the inlet cross-flow region. After the test, the bundle successfully met all acceptance criteria after the 4 hours cross-flow test. (author). 2 refs., 3 tabs.

  12. Do Test Design and Uses Influence Test Preparation? Testing a Model of Washback with Structural Equation Modeling

    Science.gov (United States)

    Xie, Qin; Andrews, Stephen

    2013-01-01

    This study introduces Expectancy-value motivation theory to explain the paths of influences from perceptions of test design and uses to test preparation as a special case of washback on learning. Based on this theory, two conceptual models were proposed and tested via Structural Equation Modeling. Data collection involved over 870 test takers of…

  13. Ultrasonic testing

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin [Sungkwunkwan Univ., Seoul (Korea, Republic of); Jeong, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of)

    2004-02-15

    For the proper performance of ultrasonic testing of steel welded joints, and anisotropic material it is necessary to have sound understanding on the underlying physics. To provide such an understanding, it is beneficial to have simulation tools for ultrasonic testing. In order to address such a need, we develop effective approaches to simulate angle beam ultrasonic testing with a personal computer. The simulation is performed using ultrasonic measurement models based on the computationally efficient multi-Gaussian beams. This reach will describe the developed ultrasonic testing models together with the experimental verification of their accuracy.

  14. Myoglobin urine test

    Science.gov (United States)

    Urine myoglobin; Heart attack - myoglobin urine test; Myositis - myoglobin urine test; Rhabdomyolysis - myoglobin urine test ... The test involves only normal urination, which should cause no discomfort.

  15. Ferritin Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Ferritin, Serum; 296 p. Lab Tests ...

  16. CANFLEX fuel bundle cross-flow endurance test 2 (test procedure)

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Deok; Chung, C. H.; Chang, S. K. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-04-01

    This report describes test procedure of cross-flow 2 test for CANFLEX fuel. In October 1996. a cross-flow test was successfully performed in the KAERI Hot Test Loop for four hours at a water flow rate of 31kg/s, temperature of 266 deg C and inlet pressure of 11MPa, but it is requested more extended time periods to determine a realistic operational margin for the CANFLEX bundle during abnormal refuelling operations. The test shall be conducted for twenty two hours under the reactor conditions. After an initial period of ten hours, the test shall be stopped at the intervals of four hours for bundle inspection and inspect the test bundle end-plate to end-cap welds for failure or crack propagation using liquid penetrant examination. 2 refs., 1 fig. (Author)

  17. Dynamic testing of adhesive joints using a shock testing machine

    NARCIS (Netherlands)

    Aanhold, J.E. van; Weersink, A.F.J.; Ludolphy, J.W.L.

    1998-01-01

    A light-weight shock testing machine, designed for type approval testing of naval equipment up to 300 kg mass, has been modified into a dynamic tensile test rig. This enables to test structural details for high rate dynamic tensile loadings such as occur during underwater shock. The maximum capacity

  18. ILAW Glass Testing for Disposal at IDF: Phase 1 Testing

    Energy Technology Data Exchange (ETDEWEB)

    Papathanassiu, Adonia [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Muller, Isabelle S. [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Brandys, Marek [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Gilbo, Konstantin [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Barkatt, Aaron [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Joseph, Innocent [EnergySolutions Federal EPC, Inc., Columbia, MD (United States); The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Pegg, Ian L. [The Catholic Univ. of America, Washington, DC (United States). Virteous State Lab.; Brown, Elvie E. [Washington River Protection Solutions, LLC, Richland, WA (United States); Swanberg, David J. [Washington River Protection Solutions, LLC, Richland, WA (United States)

    2011-04-11

    This document reports the results of the testing of phase 1 ORP LAW (low activity waste) glasses, also identified as enhanced LAW glasses. Testing involved are SPFT (Single Pass Flow Through), VHT (Vapor Hydration Test), and PCT (Product Consistency Test), along with the analytical tests (XRD and SEM-EDS). This report contains the data of the high waste loading ORP LAW glasses that will be used for the performance assessment of the IDF (Integrated Disposal Facility).

  19. ILAW Glass Testing for Disposal at IDF: Phase 1 Testing

    International Nuclear Information System (INIS)

    Papathanassiu, Adonia; Swanberg, David J.

    2011-01-01

    This document reports the results of the testing of phase 1 ORP LAW (low activity waste) glasses, also identified as enhanced LAW glasses. Testing involved are SPFT (Single Pass Flow Through), VHT (Vapor Hydration Test), and PCT (Product Consistency Test), along with the analytical tests (XRD and SEM-EDS). This report contains the data of the high waste loading ORP LAW glasses that will be used for the performance assessment of the IDF (Integrated Disposal Facility).

  20. Simplified Freeman-Tukey test statistics for testing probabilities in ...

    African Journals Online (AJOL)

    This paper presents the simplified version of the Freeman-Tukey test statistic for testing hypothesis about multinomial probabilities in one, two and multidimensional contingency tables that does not require calculating the expected cell frequencies before test of significance. The simplified method established new criteria of ...

  1. 40 CFR 53.64 - Test procedure: Static fractionator test.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Test procedure: Static fractionator test. 53.64 Section 53.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Performance Characteristics of Class II Equivalent Methods for PM2.5 § 53.64 Test procedure: Static...

  2. TOP 01-1-011B Vehicle Test Facilities at Aberdeen Test Center and Yuma Test Center

    Science.gov (United States)

    2017-12-12

    Test Center 400 Colleran Road Aberdeen Proving Ground, MD 21005-5059 U.S. Army Yuma Proving Ground Yuma Test Center 301 C. Street Yuma, AZ...22 2.6 Munson Test Area (MTA) ..................................................... 24 2.7 Land Vehicle Maintenance Facility...127 3.6 Maintenance Facilities ........................................................... 143

  3. Test plan for ISV laboratory-pyrolysis testing

    Energy Technology Data Exchange (ETDEWEB)

    McAtee, R.E.

    1991-09-01

    The objective of the laboratory-pyrolysis studies is to obtain information on the high temperature (< 1200{degree}C) degradation and alteration of organic chemicals and materials similar to those found in the Radioactive Waste Management Complex, Pit 9. This test plan describes experimental procedures, sampling and analysis strategy, sampling procedures, sample control, and document management. It addresses safety issues in the experimental apparatus and procedures, personal training, and hazardous waste disposal. Finally, it describes the data quality objectives using the EPA tiered approach to treatability studies to define where research/scoping tests fit into these studies and the EPA analytical levels required for the tests.

  4. Test report for run-in acceptance testing of hydrogen mitigation test pump-2

    International Nuclear Information System (INIS)

    Brewer, A.K.; Kolowith, R.

    1995-01-01

    This document provides the results of the run-in test of the replacement mixer pump for the Tank 241-SY-101. The test was conducted at the 400 Area MASF facility between August 12 and September 29, 1994. The report includes findings, analysis, recommendations, and corrective actions taken

  5. The testing effect for mediator final test cues and related final test cues in online and laboratory experiments.

    Science.gov (United States)

    Coppens, Leonora C; Verkoeijen, Peter P J L; Bouwmeester, Samantha; Rikers, Remy M J P

    2016-05-31

    The testing effect is the finding that information that is retrieved during learning is more often correctly retrieved on a final test than information that is restudied. According to the semantic mediator hypothesis the testing effect arises because retrieval practice of cue-target pairs (mother-child) activates semantically related mediators (father) more than restudying. Hence, the mediator-target (father-child) association should be stronger for retrieved than restudied pairs. Indeed, Carpenter (2011) found a larger testing effect when participants received mediators (father) than when they received target-related words (birth) as final test cues. The present study started as an attempt to test an alternative account of Carpenter's results. However, it turned into a series of conceptual (Experiment 1) and direct (Experiment 2 and 3) replications conducted with online samples. The results of these online replications were compared with those of similar existing laboratory experiments through small-scale meta-analyses. The results showed that (1) the magnitude of the raw mediator testing effect advantage is comparable for online and laboratory experiments, (2) in both online and laboratory experiments the magnitude of the raw mediator testing effect advantage is smaller than in Carpenter's original experiment, and (3) the testing effect for related cues varies considerably between online experiments. The variability in the testing effect for related cues in online experiments could point toward moderators of the related cue short-term testing effect. The raw mediator testing effect advantage is smaller than in Carpenter's original experiment.

  6. Dtest Testing Software

    Science.gov (United States)

    Jain, Abhinandan; Cameron, Jonathan M.; Myint, Steven

    2013-01-01

    This software runs a suite of arbitrary software tests spanning various software languages and types of tests (unit level, system level, or file comparison tests). The dtest utility can be set to automate periodic testing of large suites of software, as well as running individual tests. It supports distributing multiple tests over multiple CPU cores, if available. The dtest tool is a utility program (written in Python) that scans through a directory (and its subdirectories) and finds all directories that match a certain pattern and then executes any tests in that directory as described in simple configuration files.

  7. ITER test programme

    International Nuclear Information System (INIS)

    Abdou, M.; Baker, C.; Casini, G.

    1991-01-01

    ITER has been designed to operate in two phases. The first phase which lasts for 6 years, is devoted to machine checkout and physics testing. The second phase lasts for 8 years and is devoted primarily to technology testing. This report describes the technology test program development for ITER, the ancillary equipment outside the torus necessary to support the test modules, the international collaboration aspects of conducting the test program on ITER, the requirements on the machine major parameters and the R and D program required to develop the test modules for testing in ITER. 15 refs, figs and tabs

  8. UAS-NAS Flight Test Series 3: Test Environment Report

    Science.gov (United States)

    Hoang, Ty; Murphy, Jim; Otto, Neil

    2016-01-01

    The desire and ability to fly Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) is of increasing urgency. The application of unmanned aircraft to perform national security, defense, scientific, and emergency management are driving the critical need for less restrictive access by UAS to the NAS. UAS represent a new capability that will provide a variety of services in the government (public) and commercial (civil) aviation sectors. The growth of this potential industry has not yet been realized due to the lack of a common understanding of what is required to safely operate UAS in the NAS. NASA's UAS Integration in the NAS Project is conducting research in the areas of Separation Assurance/Sense and Avoid Interoperability (SSI), Human Systems Integration (HSI), and Communications (Comm), and Certification to support reducing the barriers of UAS access to the NAS. This research is broken into two research themes namely, UAS Integration and Test Infrastructure. UAS Integration focuses on airspace integration procedures and performance standards to enable UAS integration in the air transportation system, covering Detect and Avoid (DAA) performance standards, command and control performance standards, and human systems integration. The focus of Test Infrastructure is to enable development and validation of airspace integration procedures and performance standards, including integrated test and evaluation. In support of the integrated test and evaluation efforts, the Project will develop an adaptable, scalable, and schedulable relevant test environment capable of evaluating concepts and technologies for unmanned aircraft systems to safely operate in the NAS. To accomplish this task, the Project is conducting a series of human-in-the-loop (HITL) and flight test activities that integrate key concepts, technologies and/or procedures in a relevant air traffic environment. Each of the integrated events will build on the technical achievements, fidelity, and

  9. Retention of Prose Following Testing with Different Types of Tests.

    Science.gov (United States)

    Duchastel, Philippe C.

    1981-01-01

    Taking a test on a passage one has just studied is known to enhance later retention. This effect was influenced by the type of initial test used. It was evident in the case of the initial short-answer test, but not in the case of multiple choice and free recall tests. (Author/RD)

  10. Project W-320, operational test procedure OTP-320-003 test report

    International Nuclear Information System (INIS)

    Bevins, R.R.

    1998-01-01

    This report documents and summarizes the results of OTP-320-003 Project W-320 Operational Testing of the WRSS Supernate Transfer System. Project W-320 Operational Test OTP-320-003 was performed to verify components of the Waste Retrieval Sluicing System (WRSS) supernate transfer system functioned as designed following construction completion and turnover to operations. All equipment operation was performed by Tank Farms Operations personnel following the operational test procedure and referenced operating procedures. Supernate Transfer line Flushing System Testing was completed over the course of approximately 4 weeks as tank farm conditions and configuration, equipment availability, and operations resources allowed. All testing was performed with the 702-AZ ventilation system and the 296-P-16 ventilation systems in operation. Test procedure OTP-320-003 required two revisions during testing to incorporate Procedure Changes Authorizations (PCAs) necessary to facilitate testing. Various sections of testing are documented on each procedure revision. The completed test procedure is included as Attachment A. Exception Reports generated during the course of testing are included as Attachment B

  11. Test plan for Tank 241-AW-101 solubility screening tests

    International Nuclear Information System (INIS)

    Person, J.C.

    1998-01-01

    Tank 241-AW-101 (101-AW) has been identified as one of the early tanks to be for retrieved for low level waste pretreatment and immobilization and retrieval of the tank waste may require dilution. This test is to determine the effects of dilution on the mass of solids and their composition. This test plan gives test instructions, example data sheets, a waste compatibility review, and a waste stream fact sheet. This test Plan is similar to tests on tanks 241-AN-102 (Person 1998a) and 241-AN-107 (Person 1998 b). The 101-AW tests will be done with composites of liquid and solids from grab samples that were taken in 1998 (Benar 1998). Future revisions of the Tank Sampling and Analysis Plan (Benar 1998) may change the details of the work performed under this test plan

  12. Lactose tolerance tests

    Science.gov (United States)

    Hydrogen breath test for lactose tolerance ... Two common methods include: Lactose tolerance blood test Hydrogen breath test The hydrogen breath test is the preferred method. It measures the amount of hydrogen ...

  13. Anthrax blood test

    Science.gov (United States)

    Anthrax serology test; Antibody test for anthrax; Serologic test for B. anthracis ... This test may be performed when the health care provider suspects you have anthrax infection. The bacteria that cause ...

  14. Ketones urine test

    Science.gov (United States)

    Ketone bodies - urine; Urine ketones; Ketoacidosis - urine ketones test; Diabetic ketoacidosis - urine ketones test ... Urine ketones are usually measured as a "spot test." This is available in a test kit that ...

  15. Myoglobin blood test

    Science.gov (United States)

    Serum myoglobin; Heart attack - myoglobin blood test; Myositis - myoglobin blood test; Rhabdomyolysis - myoglobin blood test ... too high, it can damage the kidneys. This test is ordered when your health care provider suspects ...

  16. A power recirculating test rig for ball screw endurance tests

    Directory of Open Access Journals (Sweden)

    Giberti Hermes

    2016-01-01

    Full Text Available A conceptual design of an innovative test rig for endurance tests of ball screws is presented in this paper. The test rig layout is based on the power recirculating principle and it also allows to overtake the main critical issues of the ball screw endurance tests. Among these there are the high power required to make the test, the lengthy duration of the same and the high loads between the screw and the frame that holds it. The article describes the test rig designed scheme, the kinematic expedients to be adopted in order to obtain the required performance and functionality and the sizing procedure to choose the actuation system.

  17. Goodness of Fit Test and Test of Independence by Entropy

    OpenAIRE

    M. Sharifdoost; N. Nematollahi; E. Pasha

    2009-01-01

    To test whether a set of data has a specific distribution or not, we can use the goodness of fit test. This test can be done by one of Pearson X 2 -statistic or the likelihood ratio statistic G 2 , which are asymptotically equal, and also by using the Kolmogorov-Smirnov statistic in continuous distributions. In this paper, we introduce a new test statistic for goodness of fit test which is based on entropy distance, and which can be applied for large sample sizes...

  18. Evaluation of field test equipment for halide and DOP testing

    International Nuclear Information System (INIS)

    Schreiber, K.L.; Kovach, J.L.

    1975-01-01

    The Nucon Testing Services Department, field testing at power reactor sites, has performed tests using R-11, R-12, and R-112 in conjunction with gas chromatographs and direct reading halide detectors. The field operational experience with these detector systems, thus sensitivity, precision, and manner of field calibration, are presented. Laboratory experiments regarding 3 H-tagged methyl iodide for in place leak testing of adsorber systems indicate a low hazard, high reliability process for leak testing in facilities where atmospheric cross contamination occurs. (U.S.)

  19. Dispersant testing : a study on analytical test procedures

    International Nuclear Information System (INIS)

    Fingas, M.F.; Fieldhouse, B.; Wang, Z.; Environment Canada, Ottawa, ON

    2004-01-01

    Crude oil is a complex mixture of hydrocarbons, ranging from small, volatile compounds to very large, non-volatile compounds. Analysis of the dispersed oil is crucial. This paper described Environment Canada's ongoing studies on various traits of dispersants. In particular, it describes small studies related to dispersant effectiveness and methods to improve analytical procedures. The study also re-evaluated the analytical procedure for the Swirling Flask Test, which is now part of the ASTM standard procedure. There are new and improved methods for analyzing oil-in-water using gas chromatography (GC). The methods could be further enhanced by integrating the entire chromatogram rather than just peaks. This would result in a decrease in maximum variation from 5 per cent to about 2 per cent. For oil-dispersant studies, the surfactant-dispersed oil hydrocarbons consist of two parts: GC-resolved hydrocarbons and GC-unresolved hydrocarbons. This study also tested a second feature of the Swirling Flask Test in which the side spout was tested and compared with a new vessel with a septum port instead of a side spout. This decreased the variability as well as the energy and mixing in the vessel. Rather than being a variation of the Swirling Flask Test, it was suggested that a spoutless vessel might be considered as a completely separate test. 7 refs., 2 tabs., 4 figs

  20. High Ethanol Contents of Spirit Drinks in Kibera Slums, Kenya: Implications for Public Health.

    Science.gov (United States)

    Okaru, Alex O; Abuga, Kennedy O; Kibwage, Isaac O; Lachenmeier, Dirk W

    2017-10-17

    Cheap licit and artisanal illicit spirit drinks have been associated with numerous outbreaks of alcohol poisoning especially with methanol. This study aimed to evaluate the quality of cheap spirit drinks in Kibera slums in Nairobi County, Kenya. The samples consisted of cheap licit spirits ( n = 11) and the artisanal spirit drink, ' chang'aa' , ( n = 28). The parameters of alcoholic strength and volatile composition were used as indicators of quality and were determined using gas chromatography with flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS) respectively. The ranges for alcoholic strength were 42.8-85.8% vol and 28.3-56.7% vol for chang'aa and licit spirit drinks respectively, while the pH ranges were 3.3-4.2 and 4.4-4.8 for chang'aa and licit spirit drinks respectively. The majority of volatiles were found in artisanal spirits and they included higher alcohols, ethyl esters and carbonyl compounds. The alcoholic strength of all the artisanal spirits (100%) and 91% of the licit spirits was above the 40% vol of standard spirits such as vodka. The high ethanol content of the alcohol products was the only element of public health significance in this study.

  1. High Ethanol Contents of Spirit Drinks in Kibera Slums, Kenya: Implications for Public Health

    Directory of Open Access Journals (Sweden)

    Alex O. Okaru

    2017-10-01

    Full Text Available Cheap licit and artisanal illicit spirit drinks have been associated with numerous outbreaks of alcohol poisoning especially with methanol. This study aimed to evaluate the quality of cheap spirit drinks in Kibera slums in Nairobi County, Kenya. The samples consisted of cheap licit spirits (n = 11 and the artisanal spirit drink, ‘chang’aa’, (n = 28. The parameters of alcoholic strength and volatile composition were used as indicators of quality and were determined using gas chromatography with flame ionization detection (GC-FID and gas chromatography-mass spectrometry (GC-MS respectively. The ranges for alcoholic strength were 42.8–85.8% vol and 28.3–56.7% vol for chang’aa and licit spirit drinks respectively, while the pH ranges were 3.3–4.2 and 4.4–4.8 for chang’aa and licit spirit drinks respectively. The majority of volatiles were found in artisanal spirits and they included higher alcohols, ethyl esters and carbonyl compounds. The alcoholic strength of all the artisanal spirits (100% and 91% of the licit spirits was above the 40% vol of standard spirits such as vodka. The high ethanol content of the alcohol products was the only element of public health significance in this study.

  2. Relation between eating habits and a high body mass index among freshman students: a cross-sectional study.

    Science.gov (United States)

    Gunes, Fatma Esra; Bekiroglu, Nural; Imeryuz, Nese; Agirbasli, Mehmet

    2012-06-01

    This study aimed to examine the relation between eating habits and a high body mass index (BMI) in first-year freshman university students and included 2525 freshman university students 18 to 22 years old from a Turkish population. İn this study, 48% of the students were men. They were asked to complete a questionnaire on their dietary habits including the frequency of their consumption of individual food items, demographic data, and smoking habit. The effects of eating habits on increased BMI (≥25) were analyzed. Of 2259 subjects included in the analyses, 322 were overweight or obese and 1937 had normal and thin BMI (ender, recent weight change, and high number of meals as independent predictors of obesity/overweight. Frequent consumptions of beer, alcoholic drinks other than beer and wine (e.g., spirits including whisky, gin, raki, vodka), coffee, tea, coke, red meat, variety meat, and eggs were associated with a significantly higher risk of obesity/overweight, whereas frequent consumption of snacks was associated with a low risk. Findings of further studies, possibly taking into consideration the absolute quantities of consumption along with cultural and local issues, would guide the adoption of healthier feeding behaviors in this particular age group.

  3. Test Review: Test of English as a Foreign Language[TM]--Internet-Based Test (TOEFL iBT[R])

    Science.gov (United States)

    Alderson, J. Charles

    2009-01-01

    In this article, the author reviews the TOEFL iBT which is the latest version of the TOEFL, whose history stretches back to 1961. The TOEFL iBT was introduced in the USA, Canada, France, Germany and Italy in late 2005. Currently the TOEFL test is offered in two testing formats: (1) Internet-based testing (iBT); and (2) paper-based testing (PBT).…

  4. Catecholamine blood test

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003561.htm Catecholamine blood test To use the sharing features on this page, ... measured with a urine test than with a blood test. How the Test is Performed A blood sample ...

  5. Test facility TIMO for testing the ITER model cryopump

    International Nuclear Information System (INIS)

    Haas, H.; Day, C.; Mack, A.; Methe, S.; Boissin, J.C.; Schummer, P.; Murdoch, D.K.

    2001-01-01

    Within the framework of the European Fusion Technology Programme, FZK is involved in the research and development process for a vacuum pump system of a future fusion reactor. As a result of these activities, the concept and the necessary requirements for the primary vacuum system of the ITER fusion reactor were defined. Continuing that development process, FZK has been preparing the test facility TIMO (Test facility for ITER Model pump) since 1996. This test facility provides for testing a cryopump all needed infrastructure as for example a process gas supply including a metering system, a test vessel, the cryogenic supply for the different temperature levels and a gas analysing system. For manufacturing the ITER model pump an order was given to the company L' Air Liquide in the form of a NET contract. (author)

  6. Test facility TIMO for testing the ITER model cryopump

    International Nuclear Information System (INIS)

    Haas, H.; Day, C.; Mack, A.; Methe, S.; Boissin, J.C.; Schummer, P.; Murdoch, D.K.

    1999-01-01

    Within the framework of the European Fusion Technology Programme, FZK is involved in the research and development process for a vacuum pump system of a future fusion reactor. As a result of these activities, the concept and the necessary requirements for the primary vacuum system of the ITER fusion reactor were defined. Continuing that development process, FZK has been preparing the test facility TIMO (Test facility for ITER Model pump) since 1996. This test facility provides for testing a cryopump all needed infrastructure as for example a process gas supply including a metering system, a test vessel, the cryogenic supply for the different temperature levels and a gas analysing system. For manufacturing the ITER model pump an order was given to the company L'Air Liquide in the form of a NET contract. (author)

  7. Nondestructive Testing

    Energy Technology Data Exchange (ETDEWEB)

    Berger, Harold [Argonne National Laboratory

    1969-01-01

    A nondestructive test is an examination of an object in any manner which will not impair the future usefulness of the object. This booklet discusses a few basic methods of nondestructive testing, and some of their characteristics. In addition, it discusses possible future methods for nondestructive testing by taking a quick look at some of the methods now under study.

  8. Science Library of Test Items. Volume Eleven. Mastery Testing Programme. [Mastery Tests Series 3.] Tests M27-M38.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 27 through 38 include: (27) reading a grid plan; (28) identifying common invertebrates; (29) characteristics of invertebrates; (30) identifying elements; (31) using scientific notation part I; (32) classifying minerals; (33) predicting the…

  9. Ground test facility for nuclear testing of space reactor subsystems

    International Nuclear Information System (INIS)

    Quapp, W.J.; Watts, K.D.

    1985-01-01

    Two major reactor facilities at the INEL have been identified as easily adaptable for supporting the nuclear testing of the SP-100 reactor subsystem. They are the Engineering Test Reactor (ETR) and the Loss of Fluid Test Reactor (LOFT). In addition, there are machine shops, analytical laboratories, hot cells, and the supporting services (fire protection, safety, security, medical, waste management, etc.) necessary to conducting a nuclear test program. This paper presents the conceptual approach for modifying these reactor facilities for the ground engineering test facility for the SP-100 nuclear subsystem. 4 figs

  10. Thyroid Function Tests

    Science.gov (United States)

    ... Home » Thyroid Function Tests Leer en Español Thyroid Function Tests FUNCTION HOW DOES THE THYROID GLAND FUNCTION? ... Cancer Thyroid Nodules in Children and Adolescents Thyroid Function Tests Resources Thyroid Function Tests Brochure PDF En ...

  11. Blood sugar test

    Science.gov (United States)

    ... sugar; Blood sugar level; Fasting blood sugar; Glucose test; Diabetic screening - blood sugar test; Diabetes - blood sugar test ... The test may be done in the following ways: After you have not eaten anything for at least 8 ...

  12. Blood Test: Bilirubin

    Science.gov (United States)

    ... Videos for Educators Search English Español Blood Test: Bilirubin KidsHealth / For Parents / Blood Test: Bilirubin What's in ... liver or kidneys) is working. What Is a Bilirubin Test? A bilirubin test measures how much bilirubin ...

  13. Test Plan: WIPP bin-scale CH TRU waste tests

    International Nuclear Information System (INIS)

    Molecke, M.A.

    1990-08-01

    This WIPP Bin-Scale CH TRU Waste Test program described herein will provide relevant composition and kinetic rate data on gas generation and consumption resulting from TRU waste degradation, as impacted by synergistic interactions due to multiple degradation modes, waste form preparation, long-term repository environmental effects, engineered barrier materials, and, possibly, engineered modifications to be developed. Similar data on waste-brine leachate compositions and potentially hazardous volatile organic compounds released by the wastes will also be provided. The quantitative data output from these tests and associated technical expertise are required by the WIPP Performance Assessment (PA) program studies, and for the scientific benefit of the overall WIPP project. This Test Plan describes the necessary scientific and technical aspects, justifications, and rational for successfully initiating and conducting the WIPP Bin-Scale CH TRU Waste Test program. This Test Plan is the controlling scientific design definition and overall requirements document for this WIPP in situ test, as defined by Sandia National Laboratories (SNL), scientific advisor to the US Department of Energy, WIPP Project Office (DOE/WPO). 55 refs., 16 figs., 19 tabs

  14. Bacteria Culture Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/bacteriaculturetest.html Bacteria Culture Test To use the sharing features on this page, please enable JavaScript. What is a Bacteria Culture Test? Bacteria are a large group of ...

  15. Flu (Influenza) Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/fluinfluenzatest.html Flu (Influenza) Test To use the sharing features on this page, please enable JavaScript. What is a Flu (Influenza) Test? Influenza, known as the flu , is ...

  16. Allergy Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... this page: https://medlineplus.gov/labtests/allergybloodtest.html Allergy Blood Test To use the sharing features on this page, please enable JavaScript. What is an Allergy Blood Test? Allergies are a common and chronic ...

  17. Double-shell tank integrity assessments ultrasonic test equipment performance test

    Energy Technology Data Exchange (ETDEWEB)

    Pfluger, D.C.

    1996-09-26

    A double-shell tank (DST) inspection (DSTI) system was performance tested over three months until August 1995 at Pittsburgh, Pennsylvania, completing a contract initiated in February 1993 to design, fabricate, and test an ultrasonic inspection system intended to provide ultrasonic test (UT) and visual data to determine the integrity of 28 DSTs at Hanford. The DSTs are approximately one-million-gallon underground radioactive-waste storage tanks. The test was performed in accordance with a procedure (Jensen 1995) that included requirements described in the contract specification (Pfluger 1995). This report documents the results of tests conducted to evaluate the performance of the DSTI system against the requirements of the contract specification. The test of the DSTI system also reflects the performance of qualified personnel and operating procedures.

  18. Science Library of Test Items. Volume Ten. Mastery Testing Programme. [Mastery Tests Series 2.] Tests M14-M26.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 14 through 26 include: (14) calculating an average; (15) identifying parts of the scientific method; (16) reading a geological map; (17) identifying elements, mixtures and compounds; (18) using Ohm's law in calculation; (19) interpreting…

  19. Alternative filtration testing program: Pre-evaluation of test results

    International Nuclear Information System (INIS)

    Georgeton, G.K.; Poirier, M.R.

    1990-01-01

    Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing

  20. Methodology for testing metal detectors using variables test data

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, D.D.; Murray, D.W.

    1993-08-01

    By extracting and analyzing measurement (variables) data from portal metal detectors whenever possible instead of the more typical ``alarm``/``no-alarm`` (attributes or binomial) data, we can be more informed about metal detector health with fewer tests. This testing methodology discussed in this report is an alternative to the typical binomial testing and in many ways is far superior.

  1. Alternative filtration testing program: Pre-evaluation of test results

    Energy Technology Data Exchange (ETDEWEB)

    Georgeton, G.K.; Poirier, M.R.

    1990-09-28

    Based on results of testing eight solids removal technologies and one pretreatment option, it is recommended that a centrifugal ultrafilter and polymeric ultrafilter undergo further testing as possible alternatives to the Norton Ceramic filters. Deep bed filtration should be considered as a third alternative, if a backwashable cartridge filter is shown to be inefficient in separate testing.

  2. Advanced test reactor testing experience-past, present and future

    International Nuclear Information System (INIS)

    Marshall, Frances M.

    2006-01-01

    The Advanced Test Reactor (ATR), at the Idaho National Laboratory (INL), is one of the world's premier test reactors for providing the capability for studying the effects of intense neutron and gamma radiation on reactor materials and fuels. The physical configuration of the ATR, a 4-leaf clover shape, allows the reactor to be operated at different power levels in the corner 'lobes' to allow for different testing conditions for multiple simultaneous experiments. The combination of high flux (maximum thermal neutron fluxes of 1E15 neutrons per square centimeter per second and maximum fast [E>1.0 MeV] neutron fluxes of 5E14 neutrons per square centimeter per second) and large test volumes (up to 122 cm long and 12.7 cm diameter) provide unique testing opportunities. The current experiments in the ATR are for a variety of test sponsors - US government, foreign governments, private researchers, and commercial companies needing neutron irradiation services. There are three basic types of test configurations in the ATR. The simplest configuration is the sealed static capsule, which places the capsule in direct contact with the primary coolant. The next level of experiment complexity is an instrumented lead experiment, which allows for active control of experiment conditions during the irradiation. The most complex experiment is the pressurized water loop, in which the test sample can be subjected to the exact environment of a pressurized water reactor. For future research, some ATR modifications and enhancements are currently planned. This paper provides more details on some of the ATR capabilities, key design features, experiments, and future plans

  3. 46 CFR 57.06-2 - Production test plate interval of testing.

    Science.gov (United States)

    2010-10-01

    ... WELDING AND BRAZING Production Tests § 57.06-2 Production test plate interval of testing. (a) At least one... 46 Shipping 2 2010-10-01 2010-10-01 false Production test plate interval of testing. 57.06-2... follows: (1) When the extent of welding on a single vessel exceeds 50 lineal feet of either or both...

  4. The Effect of Mini and Midi Anchor Tests on Test Equating

    Science.gov (United States)

    Arikan, Çigdem Akin

    2018-01-01

    The main purpose of this study is to compare the test forms to the midi anchor test and the mini anchor test performance based on item response theory. The research was conducted with using simulated data which were generated based on Rasch model. In order to equate two test forms the anchor item nonequivalent groups (internal anchor test) was…

  5. Modification of the Rappaport rapid test in large-scale testing for syphilis. Evaluation of the rapid plate and rapid card tests.

    Science.gov (United States)

    Ghinsberg, R; Meir, E; Blumstein, G; Kafeman, R

    1975-11-01

    The Rappaport rapid (RR) plate and card tests were developed as modifications of the RR tube test to permit rapid and inexpensive screening of large numbers of subjects for the diagnosis of syphilis. More than 2,000 sera were examined in parallel by the Venereal Disease Research Laboratory (VDRL) slide test, the rapid plasma reagin (RPR) card test and the RR plate and card tests. There was complete agreement between the RR plate and card tests and the VDRL slide and RPR card tests in 96.6% of sera. In a selected group of 1,530 sera examined, in addition, by the fluorescent treponemal antibody absorption (FTA-ABS) test, there was agreement between the RR plate and card tests and the FTA-ABS test in 74.3% of sera and between the VDRL and RPR tests and the FTA-ABS test in 73.7% of sera. The RR plate test was found to be sufficiently sensitive and specific for the diagnosis of syphilis, although the VDRL slide test is perhaps more sensitive in primary and late latent syphilis. Since the antigen used in the RR tests is colored and stable and the sera do not require inactivation before the test, the tests are easier to perform than the VDRL slide test: the RR plate and card tests could therefore replace the VDRL test as a screening test, with hardly any loss of accuracy.

  6. Validation of an Academic Listening Test: Effects of "Breakdown" Tests and Test Takers' Cognitive Awareness of Listening Processes

    Science.gov (United States)

    Chi, Youngshin

    2011-01-01

    This study investigated the breakdown effect of a listening comprehension test, whether test takers are affected in comprehending lectures by impediments, and collected test takers' cognitive awareness on test tasks which contain listening breakdown factors how they perceived these impediments. In this context of the study, a "Breakdown" is a test…

  7. Testing the Turing Test — do Men Pass It?

    Science.gov (United States)

    Adam, Ruth; Hershberg, Uri; Schul, Yaacov; Solomon, Sorin

    We are fascinated by the idea of giving life to the inanimate. The fields of Artificial Life and Artificial Intelligence (AI) attempt to use a scientific approach to pursue this desire. The first steps on this approach hark back to Turing and his suggestion of an imitation game as an alternative answer to the question "can machines think?".1 To test his hypothesis, Turing formulated the Turing test1 to detect human behavior in computers. But how do humans pass such a test? What would you say if you would learn that they do not pass it well? What would it mean for our understanding of human behavior? What would it mean for our design of tests of the success of artificial life? We report below an experiment in which men consistently failed the Turing test.

  8. Cable aging tests

    International Nuclear Information System (INIS)

    Hubbard, G.

    1993-01-01

    This paper describes the results from aging, condition monitoring, and loss-of-coolant accident (LOCA) testing of class 1E electrical cables, per NUREG/CR-5772. This test was designed to test the performance of cables which had been aged with simultaneous radiation and thermal exposure. The tested cables included crosslinked polyolefin cables, ethylene propylene rubber cables, and miscellaneous cable types. Cables were exposed to 20, 40, and 60 years equivalent aging, and then exposed to LOCA tests at the end of their qualified life to determine the minimum insulation thickness needed for survival of the test. Failures were found in a large number of the tested cables. As a result the NRC has sent information notices to the industry regarding potential insulation problems. The results have raised the question of whether the artificial aging methods provide adequate testing methods. As a result of this testing the NRC is reviewing the artificial aging procedures, the adequacy of environmental qualification requirements for cable safety, and reexamining data from condition monitoring of installed cables

  9. Dynamic Response Testing in an Electrically Heated Reactor Test Facility

    Science.gov (United States)

    Bragg-Sitton, Shannon M.; Morton, T. J.

    2006-01-01

    Non-nuclear testing can be a valuable tool in development of a space nuclear power or propulsion system. In a non-nuclear test bed, electric heaters are used to simulate the heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system, but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response characteristics, and assess potential design improvements at a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE-100a heat pipe cooled, electrically heated reactor and heat exchanger hardware, utilizing a one-group solution to the point kinetics equations to simulate the expected neutronic response of the system (Bragg-Sitton, 2005). The current paper applies the same testing methodology to a direct drive gas cooled reactor system, demonstrating the applicability of the testing methodology to any reactor type and demonstrating the variation in system response characteristics in different reactor concepts. In each testing application, core power transients were controlled by a point kinetics model with reactivity feedback based on core average temperature; the neutron generation time and the temperature feedback coefficient are provided as model inputs. Although both system designs utilize a fast spectrum reactor, the method of cooling the reactor differs significantly, leading to a variable system response that can be demonstrated and assessed in a non-nuclear test facility.

  10. Material testing facilities and programs for plasma-facing component testing

    Science.gov (United States)

    Linsmeier, Ch.; Unterberg, B.; Coenen, J. W.; Doerner, R. P.; Greuner, H.; Kreter, A.; Linke, J.; Maier, H.

    2017-09-01

    Component development for operation in a large-scale fusion device requires thorough testing and qualification for the intended operational conditions. In particular environments are necessary which are comparable to the real operation conditions, allowing at the same time for in situ/in vacuo diagnostics and flexible operation, even beyond design limits during the testing. Various electron and neutral particle devices provide the capabilities for high heat load tests, suited for material samples and components from lab-scale dimensions up to full-size parts, containing toxic materials like beryllium, and being activated by neutron irradiation. To simulate the conditions specific to a fusion plasma both at the first wall and in the divertor of fusion devices, linear plasma devices allow for a test of erosion and hydrogen isotope recycling behavior under well-defined and controlled conditions. Finally, the complex conditions in a fusion device (including the effects caused by magnetic fields) are exploited for component and material tests by exposing test mock-ups or material samples to a fusion plasma by manipulator systems. They allow for easy exchange of test pieces in a tokamak or stellarator device, without opening the vessel. Such a chain of test devices and qualification procedures is required for the development of plasma-facing components which then can be successfully operated in future fusion power devices. The various available as well as newly planned devices and test stands, together with their specific capabilities, are presented in this manuscript. Results from experimental programs on test facilities illustrate their significance for the qualification of plasma-facing materials and components. An extended set of references provides access to the current status of material and component testing capabilities in the international fusion programs.

  11. Science Library of Test Items. Volume Thirteen. Mastery Testing Program. [Mastery Tests Series 5.] Tests M51-M65.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 51 through 65 include: (51) interpreting atomic and mass numbers; (52) extrapolating from a geological map; (53) matching geological sections and maps; (54) identifying parts of the human eye; (55) identifying the functions of parts of a…

  12. Test Cost and Test Accuracy in Clinical Laboratories in Kampala, Uganda.

    Science.gov (United States)

    Amukele, Timothy K; Jones, Robert; Elbireer, Ali

    2018-04-25

    To assess the accuracy and costs of laboratory tests in Kampala, Uganda. A random selection of 78 laboratories tested external quality assurance samples at market rates. There were 40 moderate- to high-complexity and 38 low-complexity laboratories. Four percent (3/78) of these laboratories were accredited and 94% (73/78) were private. The 40 moderate- to high-complexity laboratories performed malaria blood smear, urine human chorionic gonadotropin (hCG), human immunodeficiency virus (HIV), syphilis, glucose, and three-panel tests: CBC, liver function tests, and kidney function tests. The 38 low-complexity laboratories performed malaria blood smear, urine hCG, and syphilis testing only. Hematology, HIV, syphilis, and malarial proficiency testing samples were prepared by accredited laboratories in Kampala. All other samples were provided by the Royal College of Pathologists of Australia. 77.1% of all results were accurate (met target values). It varied widely by laboratory (50%-100%), test identity (malaria blood smear, 96%; serum urea nitrogen, 38%), and test type (quantitative: 66% [31%-89%], qualitative: 91% [68%-97%]). Test prices varied by up to 3,600%, and there was no correlation between test cost and accuracy (r2 = 0.02). There were large differences in accuracy and price across laboratories in Kampala. Price was not associated with quality.

  13. Testing Aircraft Instruments.

    Science.gov (United States)

    1981-02-11

    1. Have test data been collected, recorded, and presented in accordance with this TOP? Yes No Comment : 2. Were the facilities, test equipment...instrumentation, and support accommodations adequate to accomplish the test objectives? Yes No Comment : 3. Have all data collected been reviewed for...correctness and completeness? Yes No Comment : 4. Were the test results compromised in any way due to insufficient test planning? Yes No Comment : 5. Were the

  14. Pragmatic Software Testing Becoming an Effective and Efficient Test Professional

    CERN Document Server

    Black, Rex

    2011-01-01

    A hands-on guide to testing techniques that deliver reliable software and systemsTesting even a simple system can quickly turn into a potentially infinite task. Faced with tight costs and schedules, testers need to have a toolkit of practical techniques combined with hands-on experience and the right strategies in order to complete a successful project. World-renowned testing expert Rex Black provides you with the proven methods and concepts that test professionals must know. He presents you with the fundamental techniques for testing and clearly shows you how to select and apply successful st

  15. CANFLEX fuel bundle cross-flow endurance test 2 (Test report)

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-02-01

    This report describes cross-flow endurance test 2 that was conducted at the CANDU-Hot Test Loop. The test was completed on March 30, 1999 using a new CANFLEX bundle, built by KAERI. It was carried out for a total of 22 hours. After an initial period of ten hours, the test was stopped at the intervals of four hours for bundle inspection and inter-element gap measurement[7]. The test bundle end-plate to end-cap welds were inspected carefully for failure or crack propagation using liquid penetrant examination especially at the heat-affected zones. 12 refs., 4 figs., 10 tabs. (Author)

  16. Maximal cardiorespiratory fitness testing in individuals with chronic stroke with cognitive impairment: practice test effects and test-retest reliability.

    Science.gov (United States)

    Olivier, Charles; Doré, Jean; Blanchet, Sophie; Brooks, Dina; Richards, Carol L; Martel, Guy; Robitaille, Nancy-Michelle; Maltais, Désirée B

    2013-11-01

    To evaluate, for individuals with chronic stroke with cognitive impairment, (1) the effects of a practice test on peak cardiorespiratory fitness test results; (2) cardiorespiratory fitness test-retest reliability; and (3) the relationship between individual practice test effects and cognitive impairment. Cross-sectional. Rehabilitation center. A convenience sample of 21 persons (men [n=12] and women [n=9]; age range, 48-81y; 44.9±36.2mo poststroke) with cognitive impairments who had sufficient lower limb function to perform the test. Not applicable. Peak oxygen consumption (Vo(2)peak, ml·kg(-1)·min(-1)). Test-retest reliability of Vo(2)peak was excellent (intraclass correlation coefficient model 2,1 [ICC2,1]=.94; 95% confidence interval [CI], .86-.98). A paired t test showed that there was no significant difference for the group for Vo(2)peak obtained from 2 symptom-limited cardiorespiratory fitness tests performed 1 week apart on a semirecumbent cycle ergometer (test 2-test 1 difference, -.32ml·kg(-1)·min(-1); 95% CI, -.69 to 1.33ml·kg(-1)·min(-1); P=.512). Individual test-retest differences in Vo(2)peak were, however, positively related to general cognitive function as measured by the Mini-Mental State Examination (ρ=.485; Preliably measured in this group without a practice test. General cognitive function, however, may influence the effect of a practice test in that those with lower general cognitive function appear to respond differently to a practice test than those with higher cognitive function. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  17. Startup testing of Romania dual-core test reactor

    International Nuclear Information System (INIS)

    Whittemore, W.L.

    1980-01-01

    Late in 1979 both the Annular Core Pulsed Reactor (ACPR) and the 14-MW steady-state reactor (SSR) were loaded to critical. The fuel loading in both was then carried to completion and low-power testing was conducted. Early in 1980 both reactors successfully underwent high-power testing. The ACPR was operated for several hours at 500 kW and underwent pulse tests culminating in pulses with reactivity insertions of $4.60, peak power levels of about 20,000 MW, energy releases of 100 MW-sec, and peak measured fuel temperatures of 830 deg. C. The SSR was operated in several modes, both with natural convection and forced cooling with one or more pumps. The reactor successfully completed a 120-hr full-power test. Subsequent fuel element inspections confirmed that the fuel has performed without fuel damage or distortion. (author)

  18. Prostate-Specific Antigen (PSA) Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... medlineplus.gov/labtests/prostatespecificantigenpsatest.html Prostate-Specific Antigen (PSA) Test To use the sharing features on this ... enable JavaScript. What is a prostate-specific antigen (PSA) test? A prostate-specific antigen (PSA) test measures ...

  19. Field testing at the Climax Stock on the Nevada Test Site: spent fuel test and radionuclide migration experiments

    International Nuclear Information System (INIS)

    Ballou, L.B.; Isherwood, D.J.; Patrick, W.C.

    1982-01-01

    Two field tests in the Climax Stock are being conducted. The Climax Stock, a granitic instrusive, has been administratively excluded from consideration as a full-scale repository site. However, it provides a readily available facility for field testing with high-level radioactive materials at a depth (420 m) approaching that of a repository. The major test activity in the 1980 fiscal year has been initiation of the Spent Fuel Test-Climax (SFT-C). This test, which was authorized in June 1978, is designed to evaluate the generic feasibility of geologic storage and retrievability of commercial power reactor spent fuel assemblies in a granitic medium. In addition, the test is configured and instrumented to provide thermal and thermomechanical response data that will be relevant to the design of a repository in hard crystalline rock. The other field activity in the Climax Stock is a radionuclide migration test. It combines a series of field and laboratory migration experiments with the use of existing hydrologic models for pretest predictions and data interpretation. Goals of this project are to develop: (1) field measurement techniques for radionuclide migration studies in a hydrologic regime where the controlling mechanism is fracture permeability; (2) field test data on radionuclide migration; and (3) a comparison of laboratory- and field-measured retardation factors. This radionuclide migration test, which was authorized in the middle of the 1980 fiscal year, is in the preliminary design phase. The detailed program plan was prepared and subjected to formal peer review in August. In September/October researchers conducted preliminary flow tests with water in selected near-vertical fractures intersected by small horizontal boreholes. These tests were needed to establish the range of pressures, flow rates, and other operating parameters to be used in conducting the nuclide migration tests. 21 references, 14 figures, 1 table

  20. Fracture evaluation tests

    International Nuclear Information System (INIS)

    Robinson, G.C.

    1991-01-01

    In this report period, efforts have concentrated on defining the requirements for shallow-flaw beam testing. Analyses have been made to envelope the significant parameters for both deep- and shallow-flaw beams for three-point loading; that is, load to initiation of a frangible flaw, load to plastic collapse, LLD, and CMOD. An assessment was made of facilities capable of performing the tests identified by the parametric analyses discussed above. Two testing machines were identified for performing the scoped test series, the first a 550-kip Instron machine assigned to the Pressure Vessel Technology Section located in Building 9204-1 at the Y-12 Plant and the second a 220-kip MTS machine assigned to a mechanical testing group located at the K-25 Site. An existing bend test fixture previously used in the HSST clad plate test series is being modified for use in testing beams under other sponsorship but will be available for shared usage with the HSST shallow-flaw beam testing activities. To prevent the shared usage from having an adverse impact on the logistics of the HSST Program, the decision was made to procure a bend test fixture tailored specifically to serve the shallow flaw beam test series. A specification was prepared and procurement initiated. A survey is in progress for determining sources and costs of displacement-measuring instrumentation from both foreign and domestic sources. It appears that existing direct current displacement transducers available to the HSST Program may be adequate for the LLD measurements. These devices will be employed in the shakedown tests that are planned. A safety and environmental survey assessment for the beam testing conforming to the revised DOE rules has been prepared and approved

  1. Gallium-cladding compatibility testing plan. Phases 1 and 2: Test plan for gallium corrosion tests. Revision 2

    International Nuclear Information System (INIS)

    Wilson, D.F.; Morris, R.N.

    1998-05-01

    This test plan is a Level-2 document as defined in the Fissile Materials Disposition Program Light-Water-Reactor Mixed-Oxide Fuel Irradiation Test Project Plan. The plan summarizes and updates the projected Phases 1 and 2 Gallium-Cladding compatibility corrosion testing and the following post-test examination. This work will characterize the reactions and changes, if any, in mechanical properties that occur between Zircaloy clad and gallium or gallium oxide in the temperature range 30--700 C

  2. Refactoring test code

    NARCIS (Netherlands)

    A. van Deursen (Arie); L.M.F. Moonen (Leon); A. van den Bergh; G. Kok

    2001-01-01

    textabstractTwo key aspects of extreme programming (XP) are unit testing and merciless refactoring. Given the fact that the ideal test code / production code ratio approaches 1:1, it is not surprising that unit tests are being refactored. We found that refactoring test code is different from

  3. More Than Just Accuracy: A Novel Method to Incorporate Multiple Test Attributes in Evaluating Diagnostic Tests Including Point of Care Tests.

    Science.gov (United States)

    Thompson, Matthew; Weigl, Bernhard; Fitzpatrick, Annette; Ide, Nicole

    2016-01-01

    Current frameworks for evaluating diagnostic tests are constrained by a focus on diagnostic accuracy, and assume that all aspects of the testing process and test attributes are discrete and equally important. Determining the balance between the benefits and harms associated with new or existing tests has been overlooked. Yet, this is critically important information for stakeholders involved in developing, testing, and implementing tests. This is particularly important for point of care tests (POCTs) where tradeoffs exist between numerous aspects of the testing process and test attributes. We developed a new model that multiple stakeholders (e.g., clinicians, patients, researchers, test developers, industry, regulators, and health care funders) can use to visualize the multiple attributes of tests, the interactions that occur between these attributes, and their impacts on health outcomes. We use multiple examples to illustrate interactions between test attributes (test availability, test experience, and test results) and outcomes, including several POCTs. The model could be used to prioritize research and development efforts, and inform regulatory submissions for new diagnostics. It could potentially provide a way to incorporate the relative weights that various subgroups or clinical settings might place on different test attributes. Our model provides a novel way that multiple stakeholders can use to visualize test attributes, their interactions, and impacts on individual and population outcomes. We anticipate that this will facilitate more informed decision making around diagnostic tests.

  4. IFE chamber technology testing program in NIF and chamber development test plan

    International Nuclear Information System (INIS)

    Abdou, M.A.

    1995-01-01

    Issues concerning chamber technology testing program in NIF involving: criteria for evaluation/prioritization of experiments, engineering scaling requirements for test article design and material selection and R and D plan prior to NIF testing were addressed in this paper. In order to maximize the benefits of testing program in NIF, the testing in NIF should provide the experimental data relevant to DEMO design choice or to DEMO design predictive capability by utilizing engineering scaling test article designs. Test plans were developed for 2 promising chamber design concepts. Early testing in non-fusion/non-ignition prior to testing in ignition facility serves a critical role in chamber R and D test plans in order to reduce the risks and costs of the more complex experiments in NIF

  5. Effect of Test-Expectancy and Word Bank Availability on Test Performance

    Science.gov (United States)

    Glass, Laura A.; Clause, Christopher B.; Kreiner, David S.

    2007-01-01

    We examined test-expectancy as it applies to fill-in-the-blank tests. We randomly assigned 60 college students to take a fill-in-the-blank vocabulary test in one of three conditions. Two groups took the test with a word bank available; we told one group but not the other that they would have a word bank. The third group took the test with no word…

  6. Grimsel Test Site: heat test, final report

    International Nuclear Information System (INIS)

    Schneefuss, J.; Glaess, F.; Gommlich, G.; Schmidt, M.

    1989-05-01

    The Swiss concept for the storage of radioactive waste consists in placing it in compact, dense rock formations. An experiment 'Heat Test' carried out by the 'Gesellschaft fuer Strahlen- und Umweltforschung' in Nagra's Grimsel rock laboratory simulated the heat production of stored radioactive waste. The aim was to evaluate processes for the demonstration of the suitability of a final repository for heat-producing radioactive waste in cristalline rock, to investigate the thermic, mechanic and hydraulic reactions to an artificial heat source, and to develop corresponding calculating models. The duration of the tests was about 3 years. In this report the measured thermic, mechanic and hydraulic reactions are documented and discussed in detail. A simple, rotation symmetrical FEM-model was used for the preparatory and experiment-accompanying modelling of the thermomechanical conditions in the heat test. The test showed that suitable measuring methods for the surveillance of the geomechanics of a final repository are available and that the reactions of the crystalline host rock to the heat source remain locally limited and can be modelled with relatively small effort. 29 refs., 33 figs., 10 tabs

  7. Stability of fragrance patch test preparations applied in test chambers.

    Science.gov (United States)

    Mowitz, M; Zimerson, E; Svedman, C; Bruze, M

    2012-10-01

    Petrolatum patch test preparations are for practical reasons often applied in test chambers in advance, several hours or even days before the patient is tested. As many fragrance compounds are volatile it may be suspected that petrolatum preparations applied in test chambers are not stable over time. To investigate the stability of petrolatum preparations of the seven chemically defined components in the fragrance mix (FM I) when stored in test chambers. Samples of petrolatum preparations applied in test chambers stored at room temperature and in a refrigerator for between 4 and 144 h were analysed using liquid chromatographic methods. The concentration decreased by ≥ 20% within 8 h in four of seven preparations stored in Finn chambers at room temperature. When stored in a refrigerator only the preparation of cinnamal had decreased by ≥ 20% within 24 h. The stability of preparations of cinnamal stored in IQ chambers with a plastic cover was slightly better, but like the preparations applied in Finn chambers, the concentration decreased by ≥ 20% within 4 h at room temperature and within 24 h in a refrigerator. Cinnamal and cinnamyl alcohol were found to be more stable when analysed as ingredients in FM I compared with when analysed in individual preparations. Within a couple of hours several fragrance allergens evaporate from test chambers to an extent that may affect the outcome of the patch test. Application to the test chambers should be performed as close to the patch test occasion as possible and storage in a refrigerator is recommended. © 2012 The Authors. BJD © 2012 British Association of Dermatologists.

  8. Fire testing and analysis of TRUPACT-I Thermal Test Article

    International Nuclear Information System (INIS)

    Romesberg, L.E.; Longenbaugh, R.S.; Joseph, B.J.

    1989-02-01

    This report documents the fabrication and thermal test of a full-scale prototype of the revised TRUPACT-I design. The fire test demonstrated that the response of the Test Article to a jet-fueled pool fire, subsequent to the impact and puncture tests, meets the impact, puncture, and thermal performance requirements of the regulations governing transport of radioactive materials. The Test Article was a replica of the front half (closure end) of the revised TRUPACT-I design. To simulate the cumulative effect of the regulatory hypothetical accident sequence, the Test Article included the structural damage found in TRUPACT-I, Unit 0 after regulatory drop and puncture testing. The Test Article was totally engulfed in a pool fire fueled by JP-4 jet fuel for 46 minutes. The maximum temperature reached at the inner door seals was 149/degree/C (300/degree/F) and the maximum temperature at the inner door filters was 171/degree/C (340/degree/F). Both temperatures are within the normal working range for these components. Post-test leak rate measurements of 0.0041 atm-cm 3 /s (ANSI standard air) between the innermost pair of door seals and 0.0046 atm-cm 3 /s (ANSI standard air) between the outermost pair of door seals verified that the performance of the silicone seals met the design requirements. Since no detectable leakage was measured to a sensitivity of 1.0E-7 atm-cm 3 /s for the filter installation seal or quick-connect valve seal post-test, the total leak rate for the containment system was less than the maximum allowable 0.01 atm-cm 3 /s (ANSI standard air). 10 refs., 52 figs., 5 tabs

  9. Development and Initial Testing of the Tiltrotor Test Rig

    Science.gov (United States)

    Acree, C. W., Jr.; Sheikman, A. L.

    2018-01-01

    The NASA Tiltrotor Test Rig (TTR) is a new, large-scale proprotor test system, developed jointly with the U.S. Army and Air Force, to develop a new, large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The TTR is designed to test advanced proprotors up to 26 feet in diameter at speeds up to 300 knots, and even larger rotors at lower airspeeds. This combination of size and speed is unprecedented and is necessary for research into 21st-century tiltrotors and other advanced rotorcraft concepts. The TTR will provide critical data for validation of state-of-the-art design and analysis tools.

  10. lmerTest Package: Tests in Linear Mixed Effects Models

    DEFF Research Database (Denmark)

    Kuznetsova, Alexandra; Brockhoff, Per B.; Christensen, Rune Haubo Bojesen

    2017-01-01

    One of the frequent questions by users of the mixed model function lmer of the lme4 package has been: How can I get p values for the F and t tests for objects returned by lmer? The lmerTest package extends the 'lmerMod' class of the lme4 package, by overloading the anova and summary functions...... by providing p values for tests for fixed effects. We have implemented the Satterthwaite's method for approximating degrees of freedom for the t and F tests. We have also implemented the construction of Type I - III ANOVA tables. Furthermore, one may also obtain the summary as well as the anova table using...

  11. Welding of metallic fuel elements for the irradiation test in JOYO. Preliminary tests and welding execution tests (Joint research)

    International Nuclear Information System (INIS)

    Kikuchi, Hironobu; Nakamura, Kinya; Iwai, Takashi; Arai, Yasuo

    2009-10-01

    Irradiation tests of metallic fuels elements in fast test reactor JOYO are planned under the joint research of Japan Atomic Energy Agency (JAEA) and Central Research Institute of Electric Power Industry (CRIEPI). Six U-Pu-Zr fuel elements clad with ferritic martensitic steel are fabricated in Plutonium Fuel Research Facility (PFRF) of JAEA-Oarai for the first time in Japan. In PFRF, the procedures of fabrication of the fuel elements were determined and the test runs of the equipments were carried out before the welding execution tests for the fuel elements. Test samples for confirming the welding condition between the cladding tube and top and bottom endplugs were prepared, and various test runs were carried out before the welding execution tests. As a result, the welding conditions were finalized by passing the welding execution tests. (author)

  12. Science Library of Test Items. Volume Twelve. Mastery Testing Programme. [Mastery Tests Series 4.] Tests M39-M50.

    Science.gov (United States)

    New South Wales Dept. of Education, Sydney (Australia).

    As part of a series of tests to measure mastery of specific skills in the natural sciences, copies of tests 39 through 50 include: (39) using a code; (40) naming the parts of a microscope; (41) calculating density and predicting flotation; (42) estimating metric length; (43) using SI symbols; (44) using s=vt; (45) applying a novel theory; (46)…

  13. Deliverable 3.3.2 Specification of tests and test groups

    DEFF Research Database (Denmark)

    Peterson, Carrie Beth; Mitseva, Anelia; Harpur, Jill

    2009-01-01

    Deliverable 3.3.2: Specification of tests and test groups One of the main goals of the ISISEMD project is to offer innovative ICT services to improve the quality of life of elderly persons with cognitive problems or mild dementia and their informal and formal caregivers who provide every day care...... for them. This will be done via integrating intelligent scalable ICT services which will be tested for a period of 12 months under realistic conditions. Offering the services could not be complete without evaluating quality of life improvement, user acceptance and user satisfaction with a representative...... group of the target user groups. This document is devoted to describing important aspects of services evaluation such as: who the test participants will be, inclusion and exclusion criterion, selection standards, how the test participants will be recruited, ethical considerations, etc. Test methodology...

  14. Improving Molecular Genetic Test Utilization through Order Restriction, Test Review, and Guidance.

    Science.gov (United States)

    Riley, Jacquelyn D; Procop, Gary W; Kottke-Marchant, Kandice; Wyllie, Robert; Lacbawan, Felicitas L

    2015-05-01

    The ordering of molecular genetic tests by health providers not well trained in genetics may have a variety of untoward effects. These include the selection of inappropriate tests, the ordering of panels when the assessment of individual or fewer genes would be more appropriate, inaccurate result interpretation and inappropriate patient guidance, and significant unwarranted cost expenditure. We sought to improve the utilization of molecular genetic tests by requiring providers without specialty training in genetics to use genetic counselors and molecular genetic pathologists to assist in test selection. We used a genetic and genomic test review process wherein the laboratory-based genetic counselor performed the preanalytic assessment of test orders and test triage. Test indication and clinical findings were evaluated against the test panel composition, methods, and test limitations under the supervision of the molecular genetic pathologist. These test utilization management efforts resulted in a decrease in genetic test ordering and a gross cost savings of $1,531,913 since the inception of these programs in September 2011 through December 2013. The combination of limiting the availability of complex genetic tests and providing guidance regarding appropriate test strategies is an effective way to improve genetic tests, contributing to judicious use of limited health care resources. Copyright © 2015 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

  15. Fire test database

    International Nuclear Information System (INIS)

    Lee, J.A.

    1989-01-01

    This paper describes a project recently completed for EPRI by Impell. The purpose of the project was to develop a reference database of fire tests performed on non-typical fire rated assemblies. The database is designed for use by utility fire protection engineers to locate test reports for power plant fire rated assemblies. As utilities prepare to respond to Information Notice 88-04, the database will identify utilities, vendors or manufacturers who have specific fire test data. The database contains fire test report summaries for 729 tested configurations. For each summary, a contact is identified from whom a copy of the complete fire test report can be obtained. Five types of configurations are included: doors, dampers, seals, wraps and walls. The database is computerized. One version for IBM; one for Mac. Each database is accessed through user-friendly software which allows adding, deleting, browsing, etc. through the database. There are five major database files. One each for the five types of tested configurations. The contents of each provides significant information regarding the test method and the physical attributes of the tested configuration. 3 figs

  16. Development and field test of psychophysical tests for DWI arrest

    Science.gov (United States)

    1981-03-01

    Administration and scoring procedures were standardized for a sobriety test battery consisting of the walk-and-turn test, the one leg stand test, and horizontal gaze nystagmus. The effectiveness of the standardized battery was then evaluated in the l...

  17. Pre-test evaluation of LLTR series II Test A-7

    International Nuclear Information System (INIS)

    Knittle, D.

    1981-03-01

    The purpose of this report is to present pre-test predictions of pressure histories for the A-7 test to be conducted in the Large Leak Test Rig (LLTR) at the Energy Technology Engineering Center (ETEC) in April 1981

  18. Pre-test evaluation of LLTR Series II Test A-6

    International Nuclear Information System (INIS)

    Knittle, D.

    1980-11-01

    Purpose of this report is to present pre-test predictions of pressure histories for the A6 test to be conducted in the Large Leak Test Facility (LLTF) at the Energy Technology Engineering Center. A6 is part of a test program being conducted to evaluate the effects of leaks produced by a double-ended guillotine rupture of a single tube. A6 will provide data on the CRBR prototypical double rupture disc performance

  19. Test Report of Special Form Qualification Testing for the ORNL U ZipCan

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Oscar A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    This test report describes the special form testing activities performed on the two ZiPCans. One prototype test unit was subjected to the tests stipulated by 10 CFR 71.75 (d)(1)(i), ISO 2919:1999(E) Class 4 impact test, along with the leak rate test specified in 49 CFR 173.469(a)(4)(i). The other test unit was subjected to a leak rate test as specified in 173.469(a)(4)(i) and a heat test as specified in 49 CFR 173.469 (b)(4). Each test unit was leak tested before and after these respective tests. The leak rate tests performed were helium back-pressure tests and bubble tests, as specified in ANSI N14.5-2014.The measured leak rates were converted to standard condition leak rates as specified in ASTM E 493. The determined standardized leak rates from the test and calculation for both test units met the requirements for special form certification.

  20. Test plan for core drilling ignitability testing

    International Nuclear Information System (INIS)

    Witwer, K.S.

    1996-01-01

    The objective of this testing is to determine if ignition occurs while core drilling in a flammable gas environment. Drilling parameters are chosen so as to provide bounding conditions for the core sampling environment. If ignition does not occur under the conditions set forth in this test, then a satisfactory level of confidence will be obtained which would allow field operations under the normal drilling conditions

  1. Load testing circuit

    DEFF Research Database (Denmark)

    2009-01-01

    A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

  2. Integration testing through reusing representative unit test cases for high-confidence medical software.

    Science.gov (United States)

    Shin, Youngsul; Choi, Yunja; Lee, Woo Jin

    2013-06-01

    As medical software is getting larger-sized, complex, and connected with other devices, finding faults in integrated software modules gets more difficult and time consuming. Existing integration testing typically takes a black-box approach, which treats the target software as a black box and selects test cases without considering internal behavior of each software module. Though it could be cost-effective, this black-box approach cannot thoroughly test interaction behavior among integrated modules and might leave critical faults undetected, which should not happen in safety-critical systems such as medical software. This work anticipates that information on internal behavior is necessary even for integration testing to define thorough test cases for critical software and proposes a new integration testing method by reusing test cases used for unit testing. The goal is to provide a cost-effective method to detect subtle interaction faults at the integration testing phase by reusing the knowledge obtained from unit testing phase. The suggested approach notes that the test cases for the unit testing include knowledge on internal behavior of each unit and extracts test cases for the integration testing from the test cases for the unit testing for a given test criteria. The extracted representative test cases are connected with functions under test using the state domain and a single test sequence to cover the test cases is produced. By means of reusing unit test cases, the tester has effective test cases to examine diverse execution paths and find interaction faults without analyzing complex modules. The produced test sequence can have test coverage as high as the unit testing coverage and its length is close to the length of optimal test sequences. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Triglycerides Test

    Science.gov (United States)

    ... K. Brunner & Suddarth's Handbook of Laboratory and Diagnostic Tests. 2 nd Ed, Kindle. Philadelphia: Wolters Kluwer Health, Lippincott Williams & Wilkins; c2014. Triglycerides; 491–2 p. Lab Tests ...

  4. Testing iOS apps with HadoopUnit rapid distributed GUI testing

    CERN Document Server

    Tilley, Scott

    2014-01-01

    Smartphone users have come to expect high-quality apps. This has increased the importance of software testing in mobile software development. Unfortunately, testing apps-particularly the GUI-can be very time-consuming. Exercising every user interface element and verifying transitions between different views of the app under test quickly becomes problematic. For example, execution of iOS GUI test suites using Apple's UI Automation framework can take an hour or more if the app's interface is complicated. The longer it takes to run a test, the less frequently the test can be run, which in turn re

  5. Guidebook for the fabrication of non-destructive testing (NDT) test specimens

    International Nuclear Information System (INIS)

    2001-01-01

    Non-destructive testing (NDT) test specimens constitute a very important part of training and certification of NDT personnel and are important for carrying out actual inspection and testing, and for achieving international harmonization of NDT practices. The IAEA organized an advisory group of experts to develop a Guidebook for Fabrication of NDT Test Specimens. The experts consulted the ISO/FDIS 9712-1999 requirements for training and certification of personnel and the suitability of various types of NDT test specimens that are needed to meet such requirements This guidebook presents a set of NDT test specimens, and the methodology and procedures for their fabrication

  6. The Successful Test Taker: Exploring Test-Taking Behavior Profiles through Cluster Analysis

    Science.gov (United States)

    Stenlund, Tova; Lyrén, Per-Erik; Eklöf, Hanna

    2018-01-01

    To be successful in a high-stakes testing situation is desirable for any test taker. It has been found that, beside content knowledge, test-taking behavior, such as risk-taking strategies, motivation, and test anxiety, is important for test performance. The purposes of the present study were to identify and group test takers with similar patterns…

  7. Test Plan: Sludge Treatment Project Corrosion Process Chemistry Follow-on Testing

    Energy Technology Data Exchange (ETDEWEB)

    Delegard, Calvin H.; Schmidt, Andrew J.; Poloski, Adam P.

    2007-08-17

    This test plan was prepared by the Pacific Northwest National Laboratory (PNNL) under contract with Fluor Hanford (FH). The test plan describes the scope and conditions to be used to perform laboratory-scale testing of the Sludge Treatment Project (STP) hydrothermal treatment of K Basin sludge. The STP, managed for the U. S. Department of Energy (DOE) by FH, was created to design and operate a process to eliminate uranium metal from the sludge prior to packaging for Waste Isolation Pilot Plant (WIPP) by using high temperature liquid water to accelerate the reaction, produce uranium dioxide from the uranium metal, and safely discharge the hydrogen. The proposed testing builds on the approach and laboratory test findings for both K Basin sludge and simulated sludge garnered during prior testing from September 2006 to March 2007. The outlined testing in this plan is designed to yield further understanding of the nature of the chemical reactions, the effects of compositional and process variations and the effectiveness of various strategies to mitigate the observed high shear strength phenomenon observed during the prior testing. These tests are designed to provide process validation and refinement vs. process development and design input. The expected outcome is to establish a level of understanding of the chemistry such that successful operating strategies and parameters can be implemented within the confines of the existing STP corrosion vessel design. In July 2007, the DOE provided direction to FH regarding significant changes to the scope of the overall STP. As a result of the changes, FH directed PNNL to stop work on most of the planned activities covered in this test plan. Therefore, it is unlikely the testing described here will be performed. However, to preserve the test strategy and details developed to date, the test plan has been published.

  8. TRACG post-test analysis of panthers prototype tests of SBWR passive containment condenser

    International Nuclear Information System (INIS)

    Fitch, J.R.; Billig, P.F.; Abdollahian, D.; Masoni, P.

    1997-01-01

    As part of the validation effort for application of the TRACG code to the Simplified Boiling Water Reactor (SBWR), calculations have been performed for the various test facilities which are part of the SBWR design and technology certification program. These calculations include post-test calculations for tests in the PANTHERS Passive Containment Condenser (PCC) test program. Sixteen tests from the PANTHERS/PCC test matrix were selected for post-test analysis. This set includes three steady-state pure-steam tests, nine steady-state steam-air tests, and four transient tests. The purpose of this paper is to present and discuss the results of the post-test analysis. The author includes a brief description of the PANTHERS/PCC test facility and test matrix, a description of the PANTHERS/PCC post-test TRACG model and the manner in which the various types of tests in the post-test evaluation were simulated, and a presentation of the results of the TRACG simulation

  9. Randomization tests

    National Research Council Canada - National Science Library

    Edgington, Eugene S

    1980-01-01

    .... This book provides all the necessary theory and practical guidelines, such as instructions for writing computer programs, to permit experimenters to transform any statistical test into a distribution-free test...

  10. Nationale test

    DEFF Research Database (Denmark)

    2009-01-01

    Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test.......Professor Sven Erik Nordenbo og centerleder Niels Egelund, begge DPU, i samtale om nationale test....

  11. MEGAPIE-TEST: A European Project on Spallation Target Testing

    International Nuclear Information System (INIS)

    Knebel, Joachim U.; Klein, Jean-Christophe; Gorse, Dominique; Agostini, Pietro; Groeschel, Friedrich; Kupschus, Peter; Kirchner, Thomas; Vogt, Jean-Bernard

    2002-01-01

    Within the Euratom 5. Framework Programme (5FP) the European Commission is funding the MEGAPIE-TEST Project (Megawatt Pilot Experiment - Testing) over a period of three years, starting in September 2001. The project is combining the efforts of 8 main associations. MEGAPIE is a liquid metal spallation target of 1 MW of beam power. The main results of the MEGAPIE-TEST project will be: Development and comprehensive testing of a liquid metal spallation target both under beam-off and beam-on conditions, and the set up of a handbook on the design of a neutron spallation source in general. The operation of MEGAPIE within the accelerator complex SINQ at Paul Scherrer Institute (PSI), Switzerland, is envisaged in 2004. MEGAPIE is a first decisive step to realize a liquid metal spallation target in Europe. This report is giving an overview of the MEGAPIE-TEST Project, the overall work plan, and preliminary results from the design support and validation, which form an important basis for the project. (authors)

  12. Fusion Materials Irradiation Test Facility: experimental capabilities and test matrix

    International Nuclear Information System (INIS)

    Opperman, E.K.

    1982-01-01

    This report describes the experimental capabilities of the Fusion Materials Irradiation Test Facility (FMIT) and reference material specimen test matrices. The description of the experimental capabilities and the test matrices has been updated to match the current single test cell facility ad assessed experimenter needs. Sufficient detail has been provided so that the user can plan irradiation experiments and conceptual hardware. The types of experiments, irradiation environment and support services that will be available in FMIT are discussed

  13. Injection Tests

    CERN Document Server

    Kain, V

    2009-01-01

    The success of the start-up of the LHC on 10th of September was in part due to the preparation without beam and injection tests in 2008. The injection tests allowed debugging and improvement in appropriate portions to allow safe, efficient and state-of-the-art commissioning later on. The usefulness of such an approach for a successful start-up becomes obvious when looking at the problems we encountered before and during the injection tests and could solve during this period. The outline of the preparation and highlights of the different injection tests will be presented and the excellent performance of many tools discussed. A list of shortcomings will follow, leading to some planning for the preparation of the run in 2009.

  14. Nondestructive testing method

    International Nuclear Information System (INIS)

    Porter, J.F.

    1996-01-01

    Nondestructive testing (NDT) is the use of physical and chemical methods for evaluating material integrity without impairing its intended usefulness or continuing service. Nondestructive tests are used by manufaturer's for the following reasons: 1) to ensure product reliability; 2) to prevent accidents and save human lives; 3) to aid in better product design; 4) to control manufacturing processes; and 5) to maintain a uniform quality level. Nondestructive testing is used extensively on power plants, oil and chemical refineries, offshore oil rigs and pipeline (NDT can even be conducted underwater), welds on tanks, boilers, pressure vessels and heat exchengers. NDT is now being used for testing concrete and composite materials. Because of the criticality of its application, NDT should be performed and the results evaluated by qualified personnel. There are five basic nondestructive examination methods: 1) liquid penetrant testing - method used for detecting surface flaws in materials. This method can be used for metallic and nonmetallic materials, portable and relatively inexpensive. 2) magnetic particle testing - method used to detect surface and subsurface flaws in ferromagnetic materials; 3) radiographic testing - method used to detect internal flaws and significant variation in material composition and thickness; 4) ultrasonic testing - method used to detect internal and external flaws in materials. This method uses ultrasonics to measure thickness of a material or to examine the internal structure for discontinuities. 5) eddy current testing - method used to detect surface and subsurface flaws in conductive materials. Not one nondestructive examination method can find all discontinuities in all of the materials capable of being tested. The most important consideration is for the specifier of the test to be familiar with the test method and its applicability to the type and geometry of the material and the flaws to be detected

  15. Development in design of test infrastructure for ITER prototype cryoline test

    International Nuclear Information System (INIS)

    Ketan, Choukekar; Ritendra, Bhattacharya; Nitin, Shah; Muralidhara, Srinivasa; Himanshu, Kapoor; Pratik, Patel; Uday, Kumar; Biswanath, Sarkar

    2015-01-01

    The prototype cryoline (PTCL) for ITER is a representative cryoline from the complex network of all cryolines for the project. PTCL consist of six process pipes (of which four are operating at 4 K temperature level while two are operating at 80 K temperature level), thermal shield and outer vacuum jacket. PTCL will be tested for its thermal performance, mechanical integrity, leak tightness and functioning of components at cryogenic temperatures. The test infrastructure requirements for testing of PTCL have been identified based on the optimized test methodology. The best suited infrastructure option to test PTCL involves 80K system with helium compressor, test boxes, liquid helium Dewar, liquid nitrogen Dewar and interconnecting cryolines. Process study and various analyses have been performed to finalize the specifications of test infrastructure. The present work describes study on global thermo-hydraulic analysis of PTCL test infrastructure. Preliminary process simulation using the ASPEN HYSYS® has been performed to study the dynamic behavior of 80K system. (author)

  16. Comparative testing of radiographic testing, ultrasonic testing and phased array advanced ultrasonic testing non destructive testing techniques in accordance with the AWS D1.5 bridge welding code.

    Science.gov (United States)

    2014-02-01

    A comprehensive body of non-destructive testing data was collected from steel bridge welds under real-world conditions in a fabricators shop. Three different non-destructive testing (NDT) techniques were used on each weld inspection, these being R...

  17. Face Perception and Test Reliabilities in Congenital Prosopagnosia in Seven Tests

    Directory of Open Access Journals (Sweden)

    Janina Esins

    2016-01-01

    Full Text Available Congenital prosopagnosia, the innate impairment in recognizing faces, is a very heterogeneous disorder with different phenotypical manifestations. To investigate the nature of prosopagnosia in more detail, we tested 16 prosopagnosics and 21 controls with an extended test battery addressing various aspects of face recognition. Our results show that prosopagnosics exhibited significant impairments in several face recognition tasks: impaired holistic processing (they were tested amongst others with the Cambridge Face Memory Test (CFMT as well as reduced processing of configural information of faces. This test battery also revealed some new findings. While controls recognized moving faces better than static faces, prosopagnosics did not exhibit this effect. Furthermore, prosopagnosics had significantly impaired gender recognition—which is shown on a groupwise level for the first time in our study. There was no difference between groups in the automatic extraction of face identity information or in object recognition as tested with the Cambridge Car Memory Test. In addition, a methodological analysis of the tests revealed reduced reliability for holistic face processing tests in prosopagnosics. To our knowledge, this is the first study to show that prosopagnosics showed a significantly reduced reliability coefficient (Cronbach’s alpha in the CFMT compared to the controls. We suggest that compensatory strategies employed by the prosopagnosics might be the cause for the vast variety of response patterns revealed by the reduced test reliability. This finding raises the question whether classical face tests measure the same perceptual processes in controls and prosopagnosics.

  18. Test requirements for the integral effect test to simulate Korean PWR plants

    Energy Technology Data Exchange (ETDEWEB)

    Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K

    2001-02-01

    In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time.

  19. Test requirements for the integral effect test to simulate Korean PWR plants

    International Nuclear Information System (INIS)

    Song, Chul Hwa; Park, C. K.; Lee, S. J.; Kwon, T. S.; Yun, B. J.; Chung, M. K.

    2001-02-01

    In this report, the test requirements are described for the design of the integral effect test facility to simulate Korean PWR plants. Since the integral effect test facility should be designed so as to simulate various thermal hydraulic phenomena, as closely as possible, to be occurred in real plants during operation or anticipated transients, the design and operational characteristics of the reference plants (Korean Standard Nuclear Plant and Korean Next Generation Reactor)were analyzed in order to draw major components, systems, and functions to be satisfied or simulated in the test facility. The test matrix is set up by considering major safety concerns of interest and the test objectives to confirm and enhance the safety of the plants. And the analysis and prioritization of the test matrix leads to the general design requirements of the test facility. Based on the general design requirements, the design criteria is set up for the basic and detailed design of the test facility. And finally it is drawn the design requirements specific to the fluid system and measurement system of the test facility. The test requirements in this report will be used as a guideline to the scaling analysis and basic design of the test facility. The test matrix specified in this report can be modified in the stage of main testing by considering the needs of experiments and circumstances at that time

  20. Pump testing in the nuclear industry: The comprehensive test and other considerations

    International Nuclear Information System (INIS)

    Hoyle, T.F.

    1992-01-01

    The American Society of Mechanical Engineers Operations and Maintenance Working Group on Pumps and Valves is working on a revision to their pump testing Code, ISTB-1990. This revision will change the basic philosophy of pump testing in the nuclear industry. Currently, all pumps are required to be tested quarterly, except those installed in dry sumps. In the future standby pumps will receive only a start test quarterly to ensure the pump comes up to speed and pressure or flow. Then, on a biennial basis all pumps would receive a more extensive test. This comprehensive test would require high accuracy test gauges to be used, and the pumps would be required to be tested near pump design flow. Testing on minimum flow loops would not be permitted except in rare cases. Additionally. during the comprehensive test, measurements of vibration, flow, and pressure would all be taken. The OM-6 standard (ISTB Code) will also require that reference values of flow rate and differential pressure be taken at several points instead of just one point, which is current practice. The comprehensive test is just one step in ensuring the adequacy of pump testing in the nuclear industry. This paper also addresses other concerns and makes recommendations for increased quality of testing of certain critical pumps and recommendations for less stringent or no tests on less critical pumps

  1. Coaxial test fixture

    Science.gov (United States)

    Praeg, Walter F.

    1986-01-01

    An assembly is provided for testing one or more contact material samples in a vacuum environment. The samples are positioned as an inner conductive cylinder assembly which is mounted for reciprocal vertical motion as well as deflection from a vertical axis. An outer conductive cylinder is coaxially positioned around the inner cylinder and test specimen to provide a vacuum enclosure therefor. A power source needed to drive test currents through the test specimens is connected to the bottom of each conductive cylinder, through two specially formed conductive plates. The plates are similar in form, having a plurality of equal resistance current paths connecting the power source to a central connecting ring. The connecting rings are secured to the bottom of the inner conductive assembly and the outer cylinder, respectively. A hydraulic actuator is also connected to the bottom of the inner conductor assembly to adjust the pressure applied to the test specimens during testing. The test assembly controls magnetic forces such that the current distribution through the test samples is symmetrical and that contact pressure is not reduced or otherwise disturbed.

  2. Laboratory Tests

    Science.gov (United States)

    ... Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & ... What are lab tests? Laboratory tests are medical devices that are intended for use on samples of blood, urine, or other tissues ...

  3. Teacher Test Accountability.

    Directory of Open Access Journals (Sweden)

    Larry H. Ludlow

    2001-02-01

    Full Text Available Given the high stakes of teacher testing, there is no doubt that every teacher test should meet the industry guidelines set forth in the Standards for Educational and Psychological Testing. Unfortunately, however, there is no public or private business or governmental agency that serves to certify or in any other formal way declare that any teacher test does, in fact, meet the psychometric recommendations stipulated in the Standards. Consequently, there are no legislated penalties for faulty products (tests nor are there opportunities for test takers simply to raise questions about a test and to have their questions taken seriously by an impartial panel. The purpose of this article is to highlight some of the psychometric results reported by National Evaluation Systems (NES in their 1999 Massachusetts Educator Certification Test (MECT Technical Report, and more specifically, to identify those technical characteristics of the MECT that are inconsistent with the Standards. A second purpose of this article is to call for the establishment of a standing test auditing organization with investigation and sanctioning power. The significance of the present analysis is twofold: a psychometric results for the MECT are similar in nature to psychometric results presented as evidence of test development flaws in an Alabama class-action lawsuit dealing with teacher certification (an NES-designed testing system; and b there was no impartial enforcement agency to whom complaints about the Alabama tests could be brought, other than the court, nor is there any such agency to whom complaints about the Massachusetts tests can be brought. I begin by reviewing NES's role in Allen v. Alabama State Board of Education, 81-697-N. Next I explain the purpose and interpretation of standard item analysis procedures and statistics. Finally, I present results taken directly from the 1999 MECT Technical Report and compare them to procedures, results, and consequences of

  4. Credibility test; Vertrauens-Test

    Energy Technology Data Exchange (ETDEWEB)

    Fuhs, Michael

    2009-07-01

    Solar wafer producers must prove their quality standards. Q-Cells has started a marketing office and opened their test center to journalists. They are aware that adherence to standards is going only half the way of quality assurance. The other half consists in gaining the customers' trust. (orig.)

  5. Automation of Test Cases for Web Applications : Automation of CRM Test Cases

    OpenAIRE

    Seyoum, Alazar

    2012-01-01

    The main theme of this project was to design a test automation framework for automating web related test cases. Automating test cases designed for testing a web interface provide a means of improving a software development process by shortening the testing phase in the software development life cycle. In this project an existing AutoTester framework and iMacros test automation tools were used. CRM Test Agent was developed to integrate AutoTester to iMacros and to enable the AutoTester,...

  6. Test plan for Series 2 spent fuel cladding containment credit tests

    International Nuclear Information System (INIS)

    Wilson, C.N.

    1984-10-01

    This test plan describes a second series of tests to be conducted by Westinghouse Hanford Company (WHC) to evaluate the effectiveness of breached cladding as a barrier to radionuclide release in the NNWSI-proposed geologic repository. These tests will be conducted at the Hanford Engineering Development Laboratory (HEDL). A first series of tests, initiated at HEDL during FY 1983, demonstrated specimen preparation and feasibility of the testing concept. The second series tests will be similar to the Series 1 tests with the following exceptions: NNWSI reference groundwater obtained from well J-13 will be used as the leachant instead of deionized water; fuel from a second source will be used; and certain refinements will be made in specimen preparation, sampling, and analytical procedures. 12 references, 5 figures, 5 tables

  7. Putting the Testing Effect to the Test. Why and When is Testing effective for Learning in Secondary School

    NARCIS (Netherlands)

    Dirkx, Kim

    2014-01-01

    Dirkx, K. J. H. (2014, 11 April). Putting the testing effect to the test. Why and when is testing effective for learning in secondary school. Unpublished doctoral dissertation. Heerlen: Open University of the Netherlands

  8. Preliminary test conditions for KNGR SBLOCA DVI ECCS performance test

    International Nuclear Information System (INIS)

    Bae, Kyoo Whan; Song, Jin Ho; Chung, Young Jong; Sim, Suk Ku; Park, Jong Kyun

    1999-03-01

    The Korean Next Generation Reactor (KNGR) adopts 4-train Direct Vessel Injection (DVI) configuration and injects the safety injection water directly into the downcomer through the 8.5'' DVI nozzle. Thus, the thermal hydraulic phenomena such as ECCS mixing and bypass are expected to be different from those observed in the cold leg injection. In order to investigate the realistic injection phenomena and modify the analysis code developed in the basis of cold leg injection, thermal hydraulic test with the performance evaluation is required. Preliminarily, the sequence of events and major thermal hydraulic phenomena during the small break LOCA for KNGR are identified from the analysis results calculated by the CEFLASH-4AS/REM. It is shown from the analysis results that the major transient behaviors including the core mixture level are largely affected by the downcomer modeling. Therefore, to investigate the proper thermal hydraulic phenomena occurring in the downcomer with limited budget and time, the separate effects test focusing on this region is considered to be effective and the conceptual test facility based on this recommended. For this test facility the test initial and boundary conditions are developed using the CEFLASH-4AS/REM analysis results that will be used as input for the preliminary test requirements. The final test requirements will be developed through the further discussions with the test performance group. (Author). 10 refs., 18 tabs., 4 figs

  9. Collaborative Testing: Cognitive and Interpersonal Processes Related to Enhanced Test Performance

    Science.gov (United States)

    Kapitanoff, Susan H.

    2009-01-01

    Research has demonstrated that collaborative testing, working on tests in groups, leads to improved test scores but the mechanism by which this occurs has not been specified. Three factors were proposed as mediators: cognitive processes, interpersonal interactions and reduced test-anxiety. Thirty-three students completed a multiple-choice exam…

  10. Initial field testing definition of subsurface sealing and backfilling tests in unsaturated tuff

    International Nuclear Information System (INIS)

    Fernandez, J.A.; Case, J.B.; Tyburski, J.R.

    1993-05-01

    This report contains an initial definition of the field tests proposed for the Yucca Mountain Project repository sealing program. The tests are intended to resolve various performance and emplacement concerns. Examples of concerns to be addressed include achieving selected hydrologic and structural requirements for seals, removing portions of the shaft liner, excavating keyways, emplacing cementitious and earthen seals, reducing the impact of fines on the hydraulic conductivity of fractures, efficient grouting of fracture zones, sealing of exploratory boreholes, and controlling the flow of water by using engineered designs. Ten discrete tests are proposed to address these and other concerns. These tests are divided into two groups: Seal component tests and performance confirmation tests. The seal component tests are thorough small-scale in situ tests, the intermediate-scale borehole seal tests, the fracture grouting tests, the surface backfill tests, and the grouted rock mass tests. The seal system tests are the seepage control tests, the backfill tests, the bulkhead test in the Calico Hills unit, the large-scale shaft seal and shaft fill tests, and the remote borehole sealing tests. The tests are proposed to be performed in six discrete areas, including welded and non-welded environments, primarily located outside the potential repository area. The final selection of sealing tests will depend on the nature of the geologic and hydrologic conditions encountered during the development of the Exploratory Studies Facility and detailed numerical analyses. Tests are likely to be performed both before and after License Application

  11. Performances on Symbol Digit Modalities Test, Color Trails Test, and modified Stroop test in a healthy, elderly Danish sample

    DEFF Research Database (Denmark)

    Vogel, Asmus; Stokholm, Jette; Jørgensen, Kasper

    2013-01-01

    This study presents Danish data for the Symbol Digit Modalities Test (SDMT), Color Trails Test (CTT), and a modified Stroop test from 100 subjects aged 60-87 years. Among the included demographic variables, age had the highest impact on test performances. Thus, the study presents separate data...

  12. Testing activities at the National Battery Test Laboratory

    Science.gov (United States)

    Hornstra, F.; Deluca, W. H.; Mulcahey, T. P.

    The National Battery Test Laboratory (NBTL) is an Argonne National Laboratory facility for testing, evaluating, and studying advanced electric storage batteries. The facility tests batteries developed under Department of Energy programs and from private industry. These include batteries intended for future electric vehicle (EV) propulsion, electric utility load leveling (LL), and solar energy storage. Since becoming operational, the NBTL has evaluated well over 1400 cells (generally in the form of three- to six-cell modules, but up to 140-cell batteries) of various technologies. Performance characterization assessments are conducted under a series of charge/discharge cycles with constant current, constant power, peak power, and computer simulated dynamic load profile conditions. Flexible charging algorithms are provided to accommodate the specific needs of each battery under test. Special studies are conducted to explore and optimize charge procedures, to investigate the impact of unique load demands on battery performance, and to analyze the thermal management requirements of battery systems.

  13. Testing device for pipeline groups and control method for testing device

    International Nuclear Information System (INIS)

    Naito, Shinji; Kajiyama, Shigeru; Takahashi, Fuminobu; Tsuchida, Kenji; Tachibana, Yukio; Shigehiro, Katsuya; Mahara, Yoichi.

    1995-01-01

    The device of the present invention comprises a testing device main body disposed to a rail, a movable mechanism positioning from a reference point, a circumferential direction scanning mechanism, an axial direction scanning mechanism, a posture control mechanism, and a testing probe. Upon testing of pipelines, the detection device main body and auxiliary members are moved from a reference point previously set on a rail for numerical control toward pipelines to be tested in a state where the axial direction scanning mechanism and the testing probe are suspended in the axial direction. The testing is conducted by controlling the position of the testing probe in the axial direction of the pipeline by means of the axial direction scanning mechanism, and scanning the testing probe to the outer circumference of the pipeline along the circumferential track by way of the circumferential direction scanning mechanism. The device can be extremely reduced in the thickness, and can be moved with no interference with pipelines and other obstacles by remote operation even under such undesired condition as the pipelines being crowded, so that non-destructive testing can be conducted accurately. (N.H.)

  14. Guideline for penetrant testing on welds by indirect visual test

    International Nuclear Information System (INIS)

    Tanaka, Isao; Taguchi, Tetsuo; Asano, Toshio; Sakai, Kaoru; Sato, Takemitsu; Takagi, Mikio

    1999-01-01

    A study of guidelines for penetrant testing on welds by indirect visual test using image processing is presented. Due to penetrant testing regulations by direct visual test, a porosity (a round defect) whose diameter is under 1.0 mm is allowed, but no crack (a line-shaped defect) is allowed, and the allowable defect size is not clear. It was found in the investigation that the smallest line-shaped indication which the inspectors could recognize was 0.15 mm in width and 0.5 mm in length. This means that the limit of line pair which all inspectors could discriminate was 3.3. A TV camera was used to take pictures of the NSIT (National Institute of Standards and Technology) (NBS: National Bureau of Standard) resolution chart and the smallest indication above, and the limit of line pair which all inspectors could discriminate was 3.6. Therefore, it is recommended as a guideline for penetrant testing through a TV camera by indirect visual test that the resolution of 3.6 line pair per mm is required and a reference test piece be defined to assure the resolution. (author)

  15. Guideline for penetrant testing on welds by indirect visual test

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Isao; Taguchi, Tetsuo [Hitachi Ltd., Ibaraki (Japan). Hitachi Works; Asano, Toshio; Sakai, Kaoru; Sato, Takemitsu; Takagi, Mikio

    1999-07-01

    A study of guidelines for penetrant testing on welds by indirect visual test using image processing is presented. Due to penetrant testing regulations by direct visual test, a porosity (a round defect) whose diameter is under 1.0 mm is allowed, but no crack (a line-shaped defect) is allowed, and the allowable defect size is not clear. It was found in the investigation that the smallest line-shaped indication which the inspectors could recognize was 0.15 mm in width and 0.5 mm in length. This means that the limit of line pair which all inspectors could discriminate was 3.3. A TV camera was used to take pictures of the NSIT (National Institute of Standards and Technology) (NBS: National Bureau of Standard) resolution chart and the smallest indication above, and the limit of line pair which all inspectors could discriminate was 3.6. Therefore, it is recommended as a guideline for penetrant testing through a TV camera by indirect visual test that the resolution of 3.6 line pair per mm is required and a reference test piece be defined to assure the resolution. (author)

  16. Aviation Flight Test

    Data.gov (United States)

    Federal Laboratory Consortium — Redstone Test Center provides an expert workforce and technologically advanced test equipment to conduct the rigorous testing necessary for U.S. Army acquisition and...

  17. Dexamethasone suppression test

    Science.gov (United States)

    DST; ACTH suppression test; Cortisol suppression test ... During this test, you will receive dexamethasone. This is a strong man-made (synthetic) glucocorticoid medicine. Afterward, your blood is drawn ...

  18. Test Plan: Phase 1, Hanford LLW melter tests, GTS Duratek, Inc

    International Nuclear Information System (INIS)

    Eaton, W.C.

    1995-01-01

    This document provides a test plan for the conduct of vitrification testing by a vendor in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. The vendor providing this test plan and conducting the work detailed within it [one of seven selected for glass melter testing under Purchase Order MMI-SVV-384215] is GTS Duratek, Inc., Columbia, Maryland. The GTS Duratek project manager for this work is J. Ruller. This test plan is for Phase I activities described in the above Purchase Order. Test conduct includes melting of glass with Hanford LLW Double-Shell Slurry Feed waste simulant in a DuraMelter trademark vitrification system

  19. Structural Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Provides a wide variety of testing equipment, fixtures and facilities to perform both unique aviation component testing as well as common types of materials testing...

  20. HIV testing and counseling: test providers' experiences of best practices.

    Science.gov (United States)

    Myers, Ted; Worthington, Catherine; Haubrich, Dennis J; Ryder, Karen; Calzavara, Liviana

    2003-08-01

    Although education is central to HIV testing and counseling, little is known about the educational processes within the testing experience. This study investigated test providers' understandings of testing and counseling best practices. Interviews with a purposive sample of 24 test providers were thematically analyzed. Analysis revealed five best practices specific to HIV education and public health--ensuring information and education for HIV risk reduction, individualization of risk assessment, ensuring test results are given in person, providing information and referrals, and facilitating partner notification--and six practices not specific to HIV counseling relationship building. The latter were building trust and rapport; maintaining professional boundaries; ensuring a comfortable, safe environment; ensuring confidentiality; imparting nonjudgmntal attitude; and self-determination. The identified best practices demonstrated remarkable consistency across respondent subgroups. Although counseling was seen as largely educational and with a preventive focus, it included individualized messages based on assessments of risk, knowledge, and social and cultural characteristics.

  1. Test report for cesium powder and pellets inner container decontamination method determination test

    International Nuclear Information System (INIS)

    Kelly, D.L.

    1998-01-01

    This report documents the decontamination method determination testing that was performed on three cesium powder and pellets inner container test specimens The test specimens were provided by B and W Hanford Company (BVMC). The tests were conducted by the Numatec Hanford Company (NHC), in the 305 Building. Photographic evidence was also provided by NHC. The Test Plan and Test Report were provided by Waste Management Federal Services, Inc., Northwest Operations. Witnesses to testing included a test engineer, a BC project engineer, and a BC Quality Assurance (QA) representative. The Test Plan was modified with the mutual decision of the test engineer, the BWHC project engineer, and the BVMC QA representative. The results of this decision were written in red (permanent type) ink on the official copy of the test procedure, Due to the extent of the changes, a summary of the test results are provided in Section 3.0 of this Test Report. In addition, a copy of the official copy field documentation obtained during testing is included in Appendix A. The original Test Plan (HNF-2945) will be revised to indicate that extensive changes were required in the field during testing, however, the test documentation will stand as is (i.e., it will not be retyped, text shaded, etc.) due to the inclusion of the test parameters and results into this Test Report

  2. 241-AZ-101 Mixer Pump Demonstration Test Gamma Cart Acceptance Test Procedure and Quality Test Plan (ATP and QTP)

    International Nuclear Information System (INIS)

    WHITE, D.A.

    2000-01-01

    Shop test of the sludge mobilization cart system to be used in the AZ-101 Mixer Pump Demonstration Test Tests hardware and software. This procedure involves testing the Instrumentation involved with the Gamma Cart System, local and remote, including depth indicators, speed controls, interface to data acquisition software and the raising and lowering functions. This Procedure will be performed twice, once for each Gamma Cart System. This procedure does not test the accuracy of the data acquisition software

  3. 241-AZ-101 Mixer Pump Demonstration Test Gamma Cart Acceptance Test Procedure and Quality Test Plan (ATP and QTP)

    International Nuclear Information System (INIS)

    WHITE, D.A.

    2000-01-01

    Shop Test of the Gamma Cart System to be used in the AZ-101 Mixer Pump Demonstration Test. Tests hardware and software. This procedure involves testing the Instrumentation involved with the Gamma Cart System, local and remote, including: depth indicators, speed controls, interface to data acquisition software and the raising and lowering functions. This Procedure will be performed twice, once for each Gamma Cart System. This procedure does not test the accuracy of the data acquisition software

  4. The Audiovisual Vocational Preferences Test: A Research Note on Test Development.

    Science.gov (United States)

    Wilgosh, Lorraine

    1992-01-01

    This paper reports on the development of the Audiovisual Vocational Preferences Test to facilitate career planning for adolescents and young adults with mild to moderate intellectual impairments. The strategies involved in test construction, data on initial use of the test, and improvements in format and content after pilot testing are discussed.…

  5. Assessment and Testing.

    Science.gov (United States)

    Clapham, Caroline

    2000-01-01

    Explores the term "applied linguistics" and discusses the role of language testing within this discipline, the relationship between testing and teaching, and the relationship between testing and assessment (Author/VWL)

  6. Test plan for dig-face characterization performance testing

    International Nuclear Information System (INIS)

    Josten, N.E.

    1993-09-01

    The dig-face characterization concept has been under development at the Idaho National Engineering Laboratory (INEL) since FY 1992 through the support of the Buried Waste Integrated Demonstration Program. A Dig-face Characterization System conducts continuous subsurface characterization simultaneously with retrieval of hazardous and radioactive waste from buried waste sites. The system deploys multiple sensors at the retrieval operation dig-face and collects data that provide a basis for detecting, locating, and identifying hazardous conditions before they are disturbed by the retrieval equipment. This test plan describes initial efforts to test the dig-face characterization concept at the INEL Cold Test Pit using a simplified prototype apparatus and off-the-shelf sensors. The Cold Test Pit is a simulated waste site containing hazardous and radioactive waste surrogates at known locations. Testing will be directed toward three generic characterization problems: metal detection, plume detection, and radioactive source detection. The prototype apparatus will gather data using magnetometers, a ground conductivity meter, a trace gas analyzer, and a gamma ray sensor during simulated retrieval of the surrogate waste materials. The data acquired by a dig-face characterization system are unique because of the high precision, high data density, and multiple viewpoints attainable through the dig-face deployment approach. The test plan establishes procedures for collecting and validating a representative dig-face characterization data set. Analysis of these data will focus on developing criteria for predicting the depth, location, composition, and other characteristics of the surrogate waste materials. If successful, this proof-of-concept exercise will provide a foundation for future development of a fully-operational system that is capable of operating on an actual waste site

  7. Performance Test of CCTV in a Test Field

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Hyung Min [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2011-10-15

    On April 12-13, 2010, US President Obama hosted a Nuclear Security Summit in Washington, DC, to enhance international cooperation to prevent nuclear terrorism, an issue which he has identified as the most immediate and extreme threat to global security. The Summit focused on the security of nuclear materials, nonproliferation, disarmament, and peaceful nuclear energy. At the summit, the Republic of Korea was chosen as the host of the next Summit in 2012. This series of events reflects the growing global interest on 'Nuclear Security' and as the host country of the next Nuclear Summit it is the time for Korea to strengthen the physical protection regime for nuclear facilities as a first step of securing its nuclear security capability. KINAC has been operating Test field as a mean of preparing solid backup data for reviewing and revising DBT (Design Basis Threat) and to test components of the conventional physical protection system. CCTV is a key component which is used worldwide for the assessment measure of alarms. In terms of performance test of CCTV, there are several elements such as image quality, coverage and mechanical features (speed of zoom-in-out, capture, angle shift etc.). Speaking of image quality acquired by the CCTV, the quality is subject to resolution, monitor specification, camera housing, camera mounting and lightening. Thus it is clear that performance tests on image quality should consider those factors and vary the factors respectively in order to verify the influence and the interaction among those. Nevertheless due to the restrictions of the current Test field, this paper focuses on the image quality through resolution test under the various lightening conditions

  8. Lactate Test

    Science.gov (United States)

    ... Plasma Free Metanephrines Platelet Count Platelet Function Tests Pleural Fluid Analysis PML-RARA Porphyrin Tests Potassium Prealbumin ... ency/article/000391.htm . (2002 January, Updated). Lactate (Liquid) Reagent Set. Pointe Scientific, Inc. [On-line Reagent ...

  9. Electrolytes Test

    Science.gov (United States)

    ... Plasma Free Metanephrines Platelet Count Platelet Function Tests Pleural Fluid Analysis PML-RARA Porphyrin Tests Potassium Prealbumin ... of potassium is found in the plasma , the liquid portion of the blood. Monitoring potassium is important ...

  10. Gonorrhea Test

    Science.gov (United States)

    ... Links Patient Resources For Health Professionals Subscribe Search Gonorrhea Testing Send Us Your Feedback Choose Topic At ... Sources Ask Us Also Known As GC Test Gonorrhea NAAT or NAT Neisseria gonorrhoeae Nucleic Acid Amplification ...

  11. Reliability Analysis and Test Planning using CAPO-Test for Existing Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.; Faber, Michael Havbro

    2000-01-01

    Evaluation of the reliability of existing concrete structures often requires that the compressive strength of the concrete is estimated on the basis of tests performed with concrete samples from the structure considered. In this paper the CAPO-test method is considered. The different sources...... of uncertainty related to this method are described. It is shown how the uncertainty in the transformation from the CAPO-test results to estimates of the concrete strength can be modeled. Further, the statistical uncertainty is modeled using Bayesian statistics. Finally, it is shown how reliability-based optimal...... planning of CAPO-tests can be performed taking into account the expected costs due to the CAPO-tests and possible repair or failure of the structure considered. An illustrative example is presented where the CAPO-test is compared with conventional concrete cylinder compression tests performed on cores...

  12. Mercury flow tests (first report). Wall friction factor measurement tests and future tests plan

    International Nuclear Information System (INIS)

    Kaminaga, Masanori; Kinoshita, Hidetaka; Haga, Katsuhiro; Hino, Ryutaro; Sudo, Yukio

    1999-07-01

    In the neutron science project at JAERI, we plan to inject a pulsed proton beam of a maximum power of 5 MW from a high intense proton accelerator into a mercury target in order to produce high energy neutrons of a magnitude of ten times or more than existing facilities. The neutrons produced by the facility will be utilized for advanced field of science such as the life sciences etc. An urgent issue in order to accomplish this project is the establishment of mercury target technology. With this in mind, a mercury experimental loop with the capacity to circulate mercury up to 15 L/min was constructed to perform thermal hydraulic tests, component tests and erosion characteristic tests. A measurement of the wall friction factor was carried out as a first step of the mercury flow tests, while testing the characteristic of components installed in the mercury loop. This report presents an outline of the mercury loop and experimental results of the wall friction factor measurement. From the wall friction factor measurement, it was made clear that the wettability of the mercury was improved with an increase of the loop operation time and at the same time the wall friction factors were increased. The measured wall friction factors were much lower than the values calculated by the Blasius equation at the beginning of the loop operation because of wall slip caused by a non-wetted condition. They agreed well with the values calculated by the Blasius equation within a deviation of 10% when the sum of the operation time increased more than 11 hours. This report also introduces technical problems with a mercury circulation and future tests plan indispensable for the development of the mercury target. (author)

  13. Engine testing the design, building, modification and use of powertrain test facilities

    CERN Document Server

    MARTYR, A J

    2012-01-01

    Engine Testing is a unique, well-organized and comprehensive collection of the different aspects of engine and vehicle testing equipment and infrastructure for anyone involved in facility design and management, physical testing and the maintenance, upgrading and trouble shooting of testing equipment. Designed so that its chapters can all stand alone to be read in sequence or out of order as needed, Engine Testing is also an ideal resource for automotive engineers required to perform testing functions whose jobs do not involve engine testing on a regular basis. This recognized standard refer

  14. 40 CFR 63.344 - Performance test requirements and test methods.

    Science.gov (United States)

    2010-07-01

    ... electroplating tanks or chromium anodizing tanks. The sampling time and sample volume for each run of Methods 306... Chromium Anodizing Tanks § 63.344 Performance test requirements and test methods. (a) Performance test... Emissions From Decorative and Hard Chromium Electroplating and Anodizing Operations,” appendix A of this...

  15. Thermal test requirements and their verification by different test methods

    International Nuclear Information System (INIS)

    Droste, B.; Wieser, G.; Probst, U.

    1993-01-01

    The paper discusses the parameters influencing the thermal test conditions for type B-packages. Criteria for different test methods (by analytical as well as by experimental means) will be developed. A comparison of experimental results from fuel oil pool and LPG fire tests will be given. (J.P.N.)

  16. A simplification of the likelihood ratio test statistic for testing ...

    African Journals Online (AJOL)

    The traditional likelihood ratio test statistic for testing hypothesis about goodness of fit of multinomial probabilities in one, two and multi – dimensional contingency table was simplified. Advantageously, using the simplified version of the statistic to test the null hypothesis is easier and faster because calculating the expected ...

  17. Thermal-hydraulic tests with out-of-pile test facility for BOCA development

    International Nuclear Information System (INIS)

    Kitagishi, Shigeru; Aoyama, Masashi; Tobita, Masahiro; Inaba, Yoshitomo; Yamaura, Takayuki

    2012-01-01

    The fuel transient test facility was prepared for power ramping tests of light-water-reactor (LWR) fuels in the Japan Materials Testing Reactor (JMTR) under a contract project with the Nuclear Industrial Safety Agent (NISA) of the Ministry of Economy, Trade and Industry (METI). It is necessary to develop high accuracy analysis procedure for power ramping tests after restart of the JMTR. The out-of-pile test facility to simulate thermal-hydraulic conditions of the fuel transient test facility was therefore developed. Applicability of the analysis code ACE-3D was examined for thermal-hydraulic analysis of power ramping tests for 10x10 BWR fuels by the fuel transient test facility. As the results, the calculated temperature was 304°C in comparison with measured value of 304.9-317.4°C in the condition of 600 W/cm. There is a bright prospect of high accuracy power ramping tests by the fuel transient test facility in JMTR. (author)

  18. Susceptibility Testing

    Science.gov (United States)

    ... Marker Bicarbonate (Total CO2) Bilirubin Blood Culture Blood Gases Blood Ketones Blood Smear Blood Typing Blood Urea ... hours depending on the method used. There are commercial tests available that offer rapid susceptibility testing and ...

  19. The Effect of Mock Tests on Iranian EFL learners’ Test Scores

    Directory of Open Access Journals (Sweden)

    Hossein Khodabakhshzadeh

    2016-07-01

    Full Text Available The effect of using tests in test preparation courses has been subject to debate. While some scholars such as Yang and Badger (2015 believe it is a cause of positive washback effect, others argue that this issue is tentative and context-bound (Green, 2007. Therefore, this study investigated the effect of using Mock tests in International English Language Testing System (IELTS preparation courses on students’ overall IELTS scores. Fifty one IELTS students were selected non-randomly through the quota sampling approach out of 76 students at Mahan Language Institute in Birjand, Iran.  These participants were distributed into Group 1 (n=25 and Group 2 (n=26. A complete IELTS test was administered to ensure that the Groups were homogeneous and to serve as pretest. After 10 sessions of intervention, a different IELTS test was administered as posttest. The results of between subject analysis through independent samples t-test revealed that using Mock tests in the IELTS preparation courses can positively affect the participants scores on IELTS exam. Pedagogical implications are discussed.

  20. Irradiation Effects Test Series: Test IE-2. Test results report

    International Nuclear Information System (INIS)

    Allison, C.M.; Croucher, D.W.; Ploger, S.A.; Mehner, A.S.

    1977-08-01

    The report describes the results of a test using four 0.97-m long PWR-type fuel rods with differences in diametral gap and cladding irradiation. The objective of this test was to provide information about the effects of these differences on fuel rod behavior during quasi-equilibrium and film boiling operation. The fuel rods were subjected to a series of preconditioning power cycles of less than 30 kW/m. Rod powers were then increased to 68 kW/m at a coolant mass flux of 4900 kg/s-m 2 . After one hour at 68 kW/m, a power-cooling-mismatch sequence was initiated by a flow reduction at constant power. At a flow of 2550 kg/s-m 2 , the onset of film boiling occurred on one rod, Rod IE-011. An additional flow reduction to 2245 kg/s-m 2 caused the onset of film boiling on the remaining three rods. Data are presented on the behavior of fuel rods during quasiequilibrium and during film boiling operation. The effects of initial gap size, cladding irradiation, rod power cycling, a rapid power increase, and sustained film boiling are discussed. These discussions are based on measured test data, preliminary postirradiation examination results, and comparisons of results with FRAP-T3 computer model calculations

  1. Operational test report, integrated system test (ventilation upgrade)

    International Nuclear Information System (INIS)

    HARTY, W.M.

    1999-01-01

    Operational Final Test Report for Integrated Systems, Project W-030 (Phase 2 test, RECIRC and HIGH-HEAT Modes). Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks, including upgraded vapor space cooling and filtered venting of tanks AY101, AY102, AZ101, AZ102

  2. Operational test report integrated system test (ventilation upgrade)

    Energy Technology Data Exchange (ETDEWEB)

    HARTY, W.M.

    1999-10-05

    Operational Final Test Report for Integrated Systems, Project W-030 (Phase 2 test, RECIRC and HIGH-HEAT Modes). Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks, including upgraded vapor space cooling and filtered venting of tanks AY101, Ay102, AZ101, AZ102.

  3. Prealbumin Blood Test: MedlinePlus Lab Test Information

    Science.gov (United States)

    ... enough nutrition if you are in the hospital. Nutrition plays an important role in recovery and healing. Help diagnose certain infections and chronic diseases Why do I need a prealbumin blood test? Your health care provider ... test to keep track of your nutrition if you are in the hospital. You may ...

  4. Ketones blood test

    Science.gov (United States)

    Acetone bodies; Ketones - serum; Nitroprusside test; Ketone bodies - serum; Ketones - blood; Ketoacidosis - ketones blood test ... fat cells break down in the blood. This test is used to diagnose ketoacidosis . This is a ...

  5. Vocational Aptitude Test

    Directory of Open Access Journals (Sweden)

    Candiasa I Made

    2018-01-01

    Full Text Available Test for measuring vocational aptitude has been formulated and validated. There are three main constructs involved in vocational aptitude test, which are individual characteristics, activities that are likely to be selected, and professions that tend to be idolized. Individual characteristics indicate the individuals talents, whereas the activity that tends to be chosen leads to student interest in the activity, and the intended profession gives clues about the capability of themselves to pursue the profession. Content validity test with Lawse technique yields content validity ratio (CVR for all items are in the range 0.82-0.94 and content validity index (CVI = 0.88. The construct validity test yields comparative fit index (CFI = 0.918 and chi square coefficient (χ2 = 5.85 with significance (p = 0.002. These findings indicate that the test is valid either by content or construct. Furthermore, the reliability test with Alpha Cronbach found the alpha coefficient (α = 0.82. Finally, it can be concluded that vocational aptitude test can be utilized for early identification of student vocational aptitude. The hope, the test can help students to choose the appropriate vocational school, in order to obtain the better learning outcomes.

  6. Citric acid urine test

    Science.gov (United States)

    Urine - citric acid test; Renal tubular acidosis - citric acid test; Kidney stones - citric acid test; Urolithiasis - citric acid test ... No special preparation is necessary for this test. But the results ... test is usually done while you are on a normal diet. Ask your ...

  7. Vibration test and endurance test for HANARO 36-element fuel assembly

    International Nuclear Information System (INIS)

    Ryu, Jeong Soo; Kim, Heon ll; Chung, Heung June

    1998-06-01

    Vibration test and endurance test for HANARO DU (depleted uranium) 36-element fuel assembly which was fabricated by KAERI were carried out based on the HANARO operation conditions. The endurance test of 22 days was added to the previous 18 days test. The vibration test was performed at various flow rates. Vibration frequency for the 36-element fuel assembly is between 11 to 14.5 Hz. And the maximum vibration displacement is less than 100 μm. From the endurance test result, it can be concluded that the appreciable fretting wear for the 36-element fuel assembly and the hexagonal flow tube was not observed. (author). 4 refs., 5 tabs., 29 figs

  8. Assembly and installation of the large coil test facility test stand

    International Nuclear Information System (INIS)

    Queen, C.C. Jr.

    1983-01-01

    The Large Coil Test Facility (LCTF) was built to test six tokamak-type superconducting coils, with three to be designed and built by US industrial teams and three provided by Japan, Switzerland, and Euratom under an international agreement. The facility is designed to test these coils in an environment which simulates that of a tokamak. The heart of this facility is the test stand, which is made up of four major assemblies: the Gravity Base Assembly, the Bucking Post Assembly, the Torque Ring Assembly, and the Pulse Coil Assembly. This paper provides a detailed review of the assembly and installation of the test stand components and the handling and installation of the first coil into the test stand

  9. Fever in the test tube--towards a human(e) pyrogen test.

    Science.gov (United States)

    Schindler, Stephanie; Fennrich, Stefan; Crameri, Reto; Jungi, Thomas W; Montag, Thomas; Hartung, Thomas

    2007-01-01

    The human whole blood IL-1 test exploits the reaction of monocytes/macrophages for the detection of pyrogens: human whole blood taken from healthy volunteers is incubated in the presence of the test sample in any form, be it a solution, a powder or even solid material. Pyrogenic contaminations initiate the release of the "endogenous pyrogen" Interleukin-1beta determined by ELISA after incubation. In order to understand any differences between the pyrogenic activity in this test and the existing live rabbit test (species differences versus aberrant response of the particular blood sample), the rabbit whole blood test was developed. This approach could also help to avoid the use of putatively infectious human blood for pyrogen testing in vitro.

  10. Perceptions of Self-Testing for Chlamydia: Understanding and Predicting Self-Test Use.

    Science.gov (United States)

    Powell, Rachael; Pattison, Helen M; Marriott, John F

    2016-05-10

    Self-testing technology allows people to test themselves for chlamydia without professional support. This may result in reassurance and wider access to chlamydia testing, but anxiety could occur on receipt of positive results. This study aimed to identify factors important in understanding self-testing for chlamydia outside formal screening contexts, to explore the potential impacts of self-testing on individuals, and to identify theoretical constructs to form a Framework for future research and intervention development. Eighteen university students participated in semi-structured interviews; eleven had self-tested for chlamydia. Data were analysed thematically usingaFrameworkapproach. Perceivedbenefitsofself-testingincludeditsbeingconvenient, anonymousandnotrequiringphysicalexamination. Therewasconcernabouttestaccuracyandsome participants lacked confidence in using vulvo-vaginal swabs. While some participants expressed concern about the absence of professional support, all said they would seek help on receiving a positive result. Factors identified in Protection Motivation Theory and the Theory of Planned Behaviour, such as response efficacy and self-efficacy, were found to be highly salient to participants in thinking about self-testing. These exploratory findings suggest that self-testing independentlyofformalhealthcaresystemsmaynomorenegativelyimpactpeoplethanbeingtested by health care professionals. Participants' perceptions about self-testing behaviour were consistent with psychological theories. Findings suggest that interventions which increase confidence in using self-tests and that provide reassurance of test accuracy may increase self-test intentions.

  11. Pump testing - Comparison of factory vs. field test of centrifugal pumps

    International Nuclear Information System (INIS)

    Fehlau, R.

    1992-01-01

    Testing of pumps in situ, i.e., as installed in a system, will typically yield somewhat different performance results from the original manufacturer's factory test. This paper discusses some of the reasons for these variations. It shows that the factory test curves can be used for evaluation of initial acceptance tests but not for reference in normal inservice testing (IST). This is the basis for reference values used in American Society of Mechanical Engineers (ASME) Section 11 specifications and the revised ASME Code 1990

  12. Test plan for spent fuel cladding containment credit tests

    International Nuclear Information System (INIS)

    Wilson, C.N.

    1983-11-01

    Lawrence Livermore National Laboratory has chosen Westinghouse Hanford Company as a subcontractor to assist them in determining the requirements for successful disposal of spent fuel rods in the proposed Nevada Test Site repository. An initial scoping test, with the objective of determining whether or not the cladding of a breached fuel rod can be given any credit as an effective barrier to radionuclide release, is described in this test plan. 8 references, 2 figures, 4 tables

  13. Blood Test: Testosterone

    Science.gov (United States)

    ... Test: Estradiol Precocious Puberty Understanding Puberty Endocrine System Male Reproductive System Getting a Blood Test (Video) All About Puberty Blood Test (Video) Male Reproductive System View more About Us Contact Us Partners Editorial ...

  14. Blanket testing in NET

    International Nuclear Information System (INIS)

    Chazalon, M.; Daenner, W.; Libin, B.

    1989-01-01

    The testing stages in NET for the performance assessment of the various breeding blanket concepts developed at the present time in Europe for DEMO (LiPb and ceramic blankets) and the requirements upon NET to perform these tests are reviewed. Typical locations available in NET for blanket testing are the central outboard segments and the horizontal ports of in-vessel sectors. These test positions will be connectable with external test loops. The number of test loops (helium, water, liquid metal) will be such that each major class of blankets can be tested in NET. The test positions, the boundary conditions and the external test loops are identified and the requirements for test blankets are summarized (author). 6

  15. Stochastic optimization of laboratory test workflow at metallurgical testing centers

    Directory of Open Access Journals (Sweden)

    F. Tošenovský

    2016-10-01

    Full Text Available The objective of the paper is to present a way to shorten the time required to perform laboratory tests of materials in metallurgy. The paper finds a relation between the time to perform a test of materials and the number of technicians carrying out the test. The relation can be used to optimize the number of technicians. The approach is based on probability theory, as the amount of material to be tested is unknown in advance, and uses powerful modelling techniques involving the generalized estimating equations.

  16. 100 statistical tests

    CERN Document Server

    Kanji, Gopal K

    2006-01-01

    This expanded and updated Third Edition of Gopal K. Kanji's best-selling resource on statistical tests covers all the most commonly used tests with information on how to calculate and interpret results with simple datasets. Each entry begins with a short summary statement about the test's purpose, and contains details of the test objective, the limitations (or assumptions) involved, a brief outline of the method, a worked example, and the numerical calculation. 100 Statistical Tests, Third Edition is the one indispensable guide for users of statistical materials and consumers of statistical information at all levels and across all disciplines.

  17. Lactose Tolerance Tests

    Science.gov (United States)

    ... Plasma Free Metanephrines Platelet Count Platelet Function Tests Pleural Fluid Analysis PML-RARA Porphyrin Tests Potassium Prealbumin ... of these, the person tested is given a liquid to drink that contains a standard amount of ...

  18. Liver Function Tests

    Science.gov (United States)

    ... digest food, store energy, and remove poisons. Liver function tests are blood tests that check to see ... as hepatitis and cirrhosis. You may have liver function tests as part of a regular checkup. Or ...

  19. Thyroid Diseases Tests

    Science.gov (United States)

    ... Gene Mutations Testing Cytomegalovirus (CMV) Tests D-dimer Dengue Fever Testing Des-gamma-carboxy prothrombin (DCP) DHEAS ... newborn blood screening programs since early detection and treatment can minimize long-term damage. Hashimoto thyroiditis : the ...

  20. Choreographer Pre-Testing Code Analysis and Operational Testing.

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, David J. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Harrison, Christopher B. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Perr, C. W. [Sandia National Laboratories (SNL-CA), Livermore, CA (United States); Hurd, Steven A [Sandia National Laboratories (SNL-CA), Livermore, CA (United States)

    2014-07-01

    Choreographer is a "moving target defense system", designed to protect against attacks aimed at IP addresses without corresponding domain name system (DNS) lookups. It coordinates actions between a DNS server and a Network Address Translation (NAT) device to regularly change which publicly available IP addresses' traffic will be routed to the protected device versus routed to a honeypot. More details about how Choreographer operates can be found in Section 2: Introducing Choreographer. Operational considerations for the successful deployment of Choreographer can be found in Section 3. The Testing & Evaluation (T&E) for Choreographer involved 3 phases: Pre-testing, Code Analysis, and Operational Testing. Pre-testing, described in Section 4, involved installing and configuring an instance of Choreographer and verifying it would operate as expected for a simple use case. Our findings were that it was simple and straightforward to prepare a system for a Choreographer installation as well as configure Choreographer to work in a representative environment. Code Analysis, described in Section 5, consisted of running a static code analyzer (HP Fortify) and conducting dynamic analysis tests using the Valgrind instrumentation framework. Choreographer performed well, such that only a few errors that might possibly be problematic in a given operating situation were identified. Operational Testing, described in Section 6, involved operating Choreographer in a representative environment created through EmulyticsTM . Depending upon the amount of server resources dedicated to Choreographer vis-á-vis the amount of client traffic handled, Choreographer had varying degrees of operational success. In an environment with a poorly resourced Choreographer server and as few as 50-100 clients, Choreographer failed to properly route traffic over half the time. Yet, with a well-resourced server, Choreographer handled over 1000 clients without missrouting. Choreographer

Some links on this page may take you to non-federal websites. Their policies may differ from this site.