75 FR 64699 - Grant of Authority for Subzone Status; VF Corporation (Apparel, Footwear and Luggage Distribution...

Science.gov (United States)

2010-10-20

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Order No. 1714] Grant of Authority for Subzone Status; VF Corporation (Apparel, Footwear and Luggage Distribution), Martinsville, VA Pursuant to its... authority for subzone status for activity related to apparel, footwear and luggage warehousing and...

Duration Test Report for the Ventera VT10 Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

Smith, J.; Huskey, A.; Jager, D.; Hur, J.

2013-06-01

This project was established to help reduce the barriers of wind energy expansion by providing independent testing results for small wind turbines. Five turbines were tested at the National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory (NREL) as a part of round one of this project. Duration testing is one of up to five tests that may be performed on the turbines, including power performance, safety and function, noise, and power quality. Test results will provide manufacturers with reports that can be used to fulfill part of the requirements for small wind turbine certification. The test equipment included a grid-connected Ventera Energy Corporation VT10 wind turbine mounted on an 18.3-m (60-ft) self-supporting lattice tower manufactured by Rohn.

Hybrid anisotropic materials for wind power turbine blades

CERN Document Server

Golfman, Yosif

2012-01-01

Based on rapid technological developments in wind power, governments and energy corporations are aggressively investing in this natural resource. Illustrating some of the crucial new breakthroughs in structural design and application of wind energy generation machinery, Hybrid Anisotropic Materials for Wind Power Turbine Blades explores new automated, repeatable production techniques that expand the use of robotics and process controls. These practices are intended to ensure cheaper fabrication of less-defective anisotropic material composites used to manufacture power turbine blades. This boo

Next Generation Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

Cheraghi, S. Hossein [Western New England Univ., Springfield, MA (United States); Madden, Frank [FloDesign Wind Turbine Corp., Waltham, MA (United States)

2012-09-01

The goal of this collaborative effort between Western New England University's College of Engineering and FloDesign Wind Turbine (FDWT) Corporation to wok on a novel areodynamic concept that could potentially lead to the next generation of wind turbines. Analytical studies and early scale model tests of FDWT's Mixer/Ejector Wind Turbine (MEWT) concept, which exploits jet-age advanced fluid dynamics, indicate that the concept has the potential to significantly reduce the cost of electricity over conventional Horizontal Axis Wind Turbines while reducing land usage. This project involved the design, fabrication, and wind tunnel testing of components of MEWT to provide the research and engineering data necessary to validate the design iterations and optimize system performance. Based on these tests, a scale model prototype called Briza was designed, fabricated, installed and tested on a portable tower to investigate and improve the design system in real world conditions. The results of these scale prototype efforts were very promising and have contributed significantly to FDWT's ongoing development of a product scale wind turbine for deployment in multiple locations around the U.S. This research was mutually beneficial to Western New England University, FDWT, and the DOE by utilizing over 30 student interns and a number of faculty in all efforts. It brought real-world wind turbine experience into the classroom to further enhance the Green Engineering Program at WNEU. It also provided on-the-job training to many students, improving their future employment opportunities, while also providing valuable information to further advance FDWT's mixer-ejector wind turbine technology, creating opportunities for future project innovation and job creation.

Using the Resource Description and Access (RDA in the creation of persons, families and corporate bodies authority records

Directory of Open Access Journals (Sweden)

Fabrício Silva Assumpção

2013-08-01

Full Text Available Considering the development of Resource Description and Access (RDA and the importance of authority control for catalogs, this paper aims to present the RDA and its origin and development, to contextualize the creation of authority records in descriptive cataloging and to present the use of RDA in recording of attributes and relationships of person, family and corporate body entities. It also presents the RDA and its relation with FRBR and FRAD conceptual models and the sections, chapters, attributes and relationships defined for persons, families and corporate bodies. Lastly, this paper highlights some differences between RDA and AACR2r and gives some considerations about the RDA implantation.

Corporate finance

OpenAIRE

P. Quiry; Y. Le Fur; A. Salvi; M. Dallocchio; P. Vernimmen

2011-01-01

Corporate Finance: Theory and Practice, 3rd Edition, the website www.vernimmen.com and the Vernimmen.com newsletter are all written and created by an author team who are both investment bankers/corporate financiers and academics. This book covers the theory and practice of Corporate Finance from a truly European perspective. It shows how to use financial theory to solve practical problems and is written for students of corporate finance and financial analysis and practising corporate financie...

17 CFR 200.30-1 - Delegation of authority to Director of Division of Corporation Finance.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Delegation of authority to Director of Division of Corporation Finance. 200.30-1 Section 200.30-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Organization and Program Management General...

77 FR 55455 - Approval for Manufacturing Authority Foreign-Trade Zone 72, Brevini Wind USA, Inc., (Wind Turbine...

Science.gov (United States)

2012-09-10

... Authority Foreign-Trade Zone 72, Brevini Wind USA, Inc., (Wind Turbine Gear Boxes), Yorktown, IN Pursuant to... Wind USA, Inc., within FTZ 72 in Yorktown, Indiana (FTZ Docket 54-2011, filed 8-11-2011); Whereas... procedures within FTZ 72 on behalf of Brevini Wind USA, Inc., as described in the application and Federal...

Comparison of performances of full-speed turbine and half-speed turbine for nuclear power plants

International Nuclear Information System (INIS)

Wang Hu; Zhang Weihong; Zhang Qiang; Li Shaohua

2010-01-01

The steam turbines of nuclear power plants can be divided into the full-speed turbine and half-speed turbine. Different speed leads to differences in many aspects. Therefore, the rational speed is the key point in the selection of steam turbines. This paper contrasts the economy between the half-speed turbine and full-speed turbine, by calculating the relative internal efficiency of half-speed and full-speed steam turbines with the typical level of 1000 megawatt. At the same time, this paper also calculate the relative speed of high speed water drops in the last stage blade of half-speed turbine and full-speed turbine, to contrast the water erosion between the half-speed turbine and full-speed turbine. The results show that the relative internal efficiency of half-speed turbine is higher than that of the full-speed turbine, and that the security especially the ability of preventing water erosion of half-speed turbine is better than that of the full-speed turbine. (authors)

Nuclear turbine efficiency improvement by wet steam study

International Nuclear Information System (INIS)

Nishikawa, Tsuyoshi; Morson, A.; Markytan, R.

2000-01-01

Most of the turbine used at the nuclear power plant are operated at environment of wet steam, which composes of a big factor of its inner loss in comparison with those of the thermal power plant. If an analytical method predictable on behavior of the wet steam is established, it could be upgraded efficiency of the turbine and also reliability against corrosion formed by moisture. This study, therefore, aims at understanding of physical property of the wet steam flow scarcely known at present, development of an optimum turbine cascade design tool reflected by the property, development of a turbine cascade design reducible of steam loss due to wet steam by using the tool, and development on a method of removing moisture in the turbine to its outer portion. For the tool, a new three dimensional flow numerical analysis is necessary to be developed, to aim at accurately and numerically understanding of the behavior of wet steam. As this study is in advancing now, by using a turbine cascade optimized on the wet steam flow and a developed moisture removing apparatus, about 0.6 % of upgrading in turbine efficiency can be predicted in comparison with that of the advanced aero-cascade of the GE Corporation. (G.K.)

Radar Cross Section (RCS) Simulation for Wind Turbines

Science.gov (United States)

2013-06-01

wind turbines are unsafe to operate. Also, helical wind turbines generally have less environmental concerns such as killing birds , especially in...SECTION (RCS) SIMULATION FOR WIND TURBINES by Cuong Ton June 2013 Thesis Advisor: David C. Jenn Second Reader: Ric Romero THIS PAGE...TITLE AND SUBTITLE RADAR CROSS SECTION (RCS) SIMULATION FOR WIND TURBINES 5. FUNDING NUMBERS 6. AUTHOR(S) Cuong Ton 7. PERFORMING ORGANIZATION

Air Turbines for Wave Energy Conversion

Directory of Open Access Journals (Sweden)

Manabu Takao

2012-01-01

Full Text Available This paper describes the present status of the art on air turbines, which could be used for wave energy conversion. The air turbines included in the paper are as follows: Wells type turbines, impulse turbines, radial turbines, cross-flow turbine, and Savonius turbine. The overall performances of the turbines under irregular wave conditions, which typically occur in the sea, have been compared by numerical simulation and sea trial. As a result, under irregular wave conditions it is found that the running and starting characteristics of the impulse type turbines could be superior to those of the Wells turbine. Moreover, as the current challenge on turbine technology, the authors explain a twin-impulse turbine topology for wave energy conversion.

European Corporate Law

DEFF Research Database (Denmark)

Dorresteijn, Adriaan; Teichmann, Christoph; Werlauff, Erik

, and the United Kingdom are taken into account; Italy is now included in this new edition. As in earlier editions, the authors demonstrate that analysis and comparison of national corporate laws yield highly valuable general principles and observations, not least because business organizations, wherever located...... initiatives in such aspects of the corporate environment as regulation of financial institutions and non-financial reporting obligations with a view to sustainability and other social responsibility concerns. The authors, all leading experts in European corporate law, describe current and emerging trends...

Development of low head Kaplan turbine for power station rehabilitation project

Science.gov (United States)

Lim, S. M.; Ohtake, N.; Kurosawa, S.; Suzuki, T.; Yamasaki, T.; Nishi, H.

2012-11-01

This paper presents the latest Kaplan turbine rehabilitation project for Funagira Power Station in Japan completed by J-POWER Group in collaboration with Toshiba Corporation. Area of rehabilitation was restricted to guide vane and runner. The main goal of the rehabilitation project was to expand the operating range of the existing turbine in terms of discharge and power with high operational stability, low noise as well as high cavitation performance. Computational Fluids Dynamics and model test were used to optimize the shape of guide vane and runner in development stage. Finally, field tests and runner inspection were carried out to confirm the performance of the new turbine. It was found that the new turbine has excellent performance in efficiency, power output, operational stability compared with existing turbine. Moreover, no sign of cavitation on the runner blade surface was observed after 5078 hours of operation near 100% load.

Development of low head Kaplan turbine for power station rehabilitation project

International Nuclear Information System (INIS)

Lim, S M; Ohtake, N; Kurosawa, S; Suzuki, T; Yamasaki, T; Nishi, H

2012-01-01

This paper presents the latest Kaplan turbine rehabilitation project for Funagira Power Station in Japan completed by J-POWER Group in collaboration with Toshiba Corporation. Area of rehabilitation was restricted to guide vane and runner. The main goal of the rehabilitation project was to expand the operating range of the existing turbine in terms of discharge and power with high operational stability, low noise as well as high cavitation performance. Computational Fluids Dynamics and model test were used to optimize the shape of guide vane and runner in development stage. Finally, field tests and runner inspection were carried out to confirm the performance of the new turbine. It was found that the new turbine has excellent performance in efficiency, power output, operational stability compared with existing turbine. Moreover, no sign of cavitation on the runner blade surface was observed after 5078 hours of operation near 100% load.

USW[center dot]33M-VS wind power turbine winning a 1993 environmental department prize of Discover Magazine. 1993 nendo DISCOVER kankyo bumonsho ni USW/33M-VS furyoku turbine

Energy Technology Data Exchange (ETDEWEB)

Ushiyama, M. (Waseda University, Tokyo (Japan))

1993-12-01

This paper introduces a variable speed wind power turbine developed jointly by EPRI and US Wind Power Corporation. This wind power turbine has a wind velocity responsive construction in which generated alternating current power has the frequency vary with change in the shaft rotation speed. The specified performance calls for a cut-in of 4 m/s and cut-out of 29 m/s, wind velocity variable. The blades are made of laminated fiberglass, and the rotor has a diameter of 33 m, rotation variable. The tower height is classified to 24 m, 30 m, and 42 m. The blade pitch is controlled by a linear hydraulic cylinder, and the turbine is controlled by a microprocessor. The wind turbine has a system interconnecting control and data collecting system. Two induction three-phase generators are used. EPRI has calculated its power generation cost at 5 cents/kWh if wind blows at an annual average velocity of 16 miles per hour. This is nearly equivalent to the cost at new power plants. US Wind Power Corporation has disassembled 22 experimental models that have been in operation to investigate wear in the machines. Its economy is evaluated comparable with that for fossil fuel technologies. 1 fig.

The Electromagnetic Impact of Wind Turbines

Science.gov (United States)

2015-07-06

Applied Project 4. TITLE AND SUBTITLE THE ELECTROMAGNETIC IMPACT OF WIND TURBINES 5. FUNDING NUMBERS 6. AUTHOR(S) Gregory Sasarita and Charles R...DISTRIBUTION CODE A 13. ABSTRACT (maximum 200 words) The objective of this project was to investigate the impact that a wind turbine can have on

75 FR 12732 - Foreign-Trade Zones 73 and 74; Application for Manufacturing Authority; The Belt's Corporation...

Science.gov (United States)

2010-03-17

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket 16-2010] Foreign-Trade Zones 73 and 74... Corporation (TBC), an operator of FTZs 73 and 74, requesting manufacturing authority at sites within FTZs 73... CFR part 400). It was formally filed on March 5, 2010. The TBC facility in FTZ 73 (32 employees, 3,300...

DOE-EPRI distributed wind Turbine Verification Program (TVP III)

Energy Technology Data Exchange (ETDEWEB)

McGowin, C.; DeMeo, E. [Electric Power Research Institute, Palo Alto, CA (United States); Calvert, S. [Dept. of Energy, Washington, DC (United States)] [and others

1997-12-31

In 1992, the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) initiated the Utility Wind Turbine Verification Program (TVP). The goal of the program is to evaluate prototype advanced wind turbines at several sites developed by U.S. electric utility companies. Two six MW wind projects have been installed under the TVP program by Central and South West Services in Fort Davis, Texas and Green Mountain Power Corporation in Searsburg, Vermont. In early 1997, DOE and EPRI selected five more utility projects to evaluate distributed wind generation using smaller {open_quotes}clusters{close_quotes} of wind turbines connected directly to the electricity distribution system. This paper presents an overview of the objectives, scope, and status of the EPRI-DOE TVP program and the existing and planned TVP projects.

Sub-scale Inverse Wind Turbine Blade Design Using Bound Circulation

Science.gov (United States)

Kelley, Christopher; Berg, Jonathan

2014-11-01

A goal of the National Rotor Testbed project at Sandia is to design a sub-scale wind turbine blade that has similitude to a modern, commercial size blade. However, a smaller diameter wind turbine operating at the same tip-speed-ratio exhibits a different range of operating Reynolds numbers across the blade span, thus changing the local lift and drag coefficients. Differences to load distribution also affect the wake dynamics and stability. An inverse wind turbine blade design tool has been implemented which uses a target, dimensionless circulation distribution from a full-scale blade to find the chord and twist along a sub-scale blade. In addition, airfoil polar data are interpolated from a few specified span stations leading to a smooth, manufacturable blade. The iterative process perturbs chord and twist, after running a blade element momentum theory code, to reduce the residual sum of the squares between the modeled sub-scale circulation and the target full-scale circulation. It is shown that the converged sub-scale design also leads to performance similarity in thrust and power coefficients. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy under Contract DE-AC04-94AL85000.

Safety Evaluation Report on Tennessee Valley Authority: Revised Corporate Nuclear Performance Plan

International Nuclear Information System (INIS)

1987-07-01

The TVA Corporate Nuclear Performance Plan addresses those corporate concerns identified by the NRC staff. Because much of the TVA corporate plan is programmatic, its effectiveness depends on its implementation, and the NRC staff plans to closely monitor this implementation. The NRC staff will address site-specific concerns in subsequent SERs on each volume of the Nuclear Performance Plan. On the basis of its review, the NRC staff finds TVA's revised Corporate Nuclear Performance Plan (Revision 4) acceptable. The NRC staff concludes that the organization and staffing of TVA's Office of Nuclear Power and the programmatic improvements in place or under way are sufficient, if implemented properly, to resolve the problems at the corporate level that led to issuance of the 10 CFR 50.54(f) letter dated September 17, 1985, and to support continuing TVA nuclear activities, including plant operations. 19 refs., 3 figs

Development of Low Price Turbine Control System

Energy Technology Data Exchange (ETDEWEB)

Jeong, C.K.; Kim, J.A.; Jeong, W.J.; Choi, I.K.; Woo, J.H. [Korea Electric Power Research Institute, Taejon (Korea)

2002-07-01

This report is final research results of ''Development of Low Price Turbine Control System''. It describes test such as turbine startup, generator synchronization, rated load operation, simulation after manufacturing turbine control system. (author). 45 figs., 11 tabs.

Wind turbines, is it just wind?

International Nuclear Information System (INIS)

Boiteux, M.

2012-01-01

The author first outlines that wind energy is not only random, but almost absent in extreme situations when it would be needed (for example and notably, very cold weather without wind). He suggests the association of a gas turbine to each wind turbine, so that the gas turbine will replace non operating wind turbines. He notices that wind turbines are not proximity energy as they were said to be, and that profitability in fact requires tens of grouped giant wind turbines. He also outlines the high cost of construction of grids for the connection of these wind turbines. Thus, he states that wind energy is far from being profitable in the present conditions of electricity tariffs in France

Еnterprise’s corporate management improvement on the base of corporate culture development

Directory of Open Access Journals (Sweden)

T.O. Biliak

2016-12-01

Full Text Available The author reveals extremely important role of corporate culture and uniqueness of the corporate culture system. It is established that the corporate management is characterized above all, by the economic activity and corporate culture practice. The securement of the balance in the process of interaction between organization and its environment plays one of the key roles in any management system. The author determines the influence of corporate culture on the business activity of the enterprise, when personnel predicts the situation development according to which they build models and evaluate their behavior. While realizing them in their activity employees strengthen certain trends and create in such a way appropriate situations. The search of ways of development and changing corporate culture as the base of corporate management improvement is conducted with the use of the strategic approach. The creation of a corporate culture that supports the development strategy of the enterprise, is an essential component of effective business and management, because the culture shapes a socio-psychological climate and corporate spirit which contributes to the operational execution of tasks and achievement of certain goals. Accordingly to the mentioned above, the set of measures of enterprise’s corporate culture development securement is proposed.

Advanced Micro Turbine System (AMTS) -C200 Micro Turbine -Ultra-Low Emissions Micro Turbine

Energy Technology Data Exchange (ETDEWEB)

Capstone Turbine Corporation

2007-12-31

In September 2000 Capstone Turbine Corporation commenced work on a US Department of Energy contract to develop and improve advanced microturbines for power generation with high electrical efficiency and reduced pollutants. The Advanced MicroTurbine System (AMTS) program focused on: (1) The development and implementation of technology for a 200 kWe scale high efficiency microturbine system (2) The development and implementation of a 65 kWe microturbine which meets California Air Resources Board (CARB) emissions standards effective in 2007. Both of these objectives were achieved in the course of the AMTS program. At its conclusion prototype C200 Microturbines had been designed, assembled and successfully completed field demonstration. C65 Microturbines operating on natural, digester and landfill gas were also developed and successfully tested to demonstrate compliance with CARB 2007 Fossil Fuel Emissions Standards for NOx, CO and VOC emissions. The C65 Microturbine subsequently received approval from CARB under Executive Order DG-018 and was approved for sale in California. The United Technologies Research Center worked in parallel to successfully execute a RD&D program to demonstrate the viability of a low emissions AMS which integrated a high-performing microturbine with Organic Rankine Cycle systems. These results are documented in AMS Final Report DOE/CH/11060-1 dated March 26, 2007.

Creating corporate advantage.

Science.gov (United States)

Collis, D J; Montgomery, C A

1998-01-01

What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

Small Wind Turbine Technology Assessment

International Nuclear Information System (INIS)

Avia Aranda, F.; Cruz Cruz, I.

1999-01-01

The result of the study carried out under the scope of the ATYCA project Test Plant of Wind Systems for Isolated Applications, about the state of art of the small wind turbine technology (wind turbines with swept area smaller than 40 m 2 ) is presented. The study analyzes the collected information on 60 models of wind turbines from 23 manufacturers in the worldwide market. Data from Chinese manufacturers, that have a large participation in the total number of small wind turbines in operation, are not included, due to the unavailability of the technical information. (Author) 15 refs

77 FR 32497 - Grant of Authority for Subzone Status; Mitsubishi Power Systems Americas, Inc. (Wind Turbine...

Science.gov (United States)

2012-06-01

... Status; Mitsubishi Power Systems Americas, Inc. (Wind Turbine Nacelles and Generating Sets) Fort Smith... special-purpose subzone at the wind turbine nacelle and generating set manufacturing facility of... related to the manufacturing of wind turbine nacelles and generating sets at the Mitsubishi Power Systems...

Optimal design of marine steam turbine

International Nuclear Information System (INIS)

Liu Chengyang; Yan Changqi; Wang Jianjun

2012-01-01

The marine steam turbine is one of the key equipment in marine power plant, and it tends to using high power steam turbine, which makes the steam turbine to be heavier and larger, it causes difficulties to the design and arrangement of the steam turbine, and the marine maneuverability is seriously influenced. Therefore, it is necessary to apply optimization techniques to the design of the steam turbine in order to achieve the minimum weight or volume by means of finding the optimum combination of design parameters. The math model of the marine steam turbine design calculation was established. The sensitivities of condenser pressure, power ratio of HP turbine with LP turbine, and the ratio of diameter with height at the end stage of LP turbine, which influence the weight of the marine steam turbine, were analyzed. The optimal design of the marine steam turbine, aiming at the weight minimization while satisfying the structure and performance constraints, was carried out with the hybrid particle swarm optimization algorithm. The results show that, steam turbine weight is reduced by 3.13% with the optimization scheme. Finally, the optimization results were analyzed, and the steam turbine optimization design direction was indicated. (authors)

Development of a more fish-tolerant turbine runner, advanced hydropower turbine project

International Nuclear Information System (INIS)

Cook, T.C.; Hecker, G.E.

1997-02-01

Alden Research Laboratory, Inc. (ARL) and Northern Research and Engineering Corporation (NREC) conducted a research program to develop a turbine runner which will minimize fish injury and mortality at hydroelectric projects. ARL?NREC have developed a runner shape which minimizes the number of blade leading edges, reduces the pressure versus time and the velocity versus distance gradients within the runner, minimizes or eliminates the clearance between the runner and runner housing, and maximizes the size of the flow passages, all with minimal penalty on turbine efficiency. An existing pump impeller provided the starting point for developing the fish tolerant turbine runner. The Hidrostal pump is a single bladed combined screw/centrifugal pump which has been proven to transport fish with minimal injury. The focus of the ARL/NREC research project was to develop a new runner geometry which is effective in downstream fish passage and hydroelectric power generation. A flow of 1,000 cfs and a head in the range of 75 ft to 100 ft were selected for conceptual design of the new runner. Conceptual design of the new runner began with a re-evaluation of studies which have been previously conducted to identify probable sources of injury to fish passing through hydraulic turbines. Criteria relative to hydraulic characteristics which are favorable for fish passage were prepared based on a reassessment of the available information. Important criteria used to develop the new runner design included low pressure change rates, minimum absolute pressures, and minimum shear. Other criteria which are reflected in the runner design are a minimum number of blades (only two), minimum total length of leading edges, and large flow passages. 86 figs., 5 tabs

Simulation model of nuclear power plant turbine

International Nuclear Information System (INIS)

Dutta, Anu; Thangamani, I.; Chakraborty, G.; Ghosh, A.K.

2006-04-01

A computer code TURDYN has been developed for prediction of HP and LP turbine torque under thermodynamic transient conditions. The model is based on the conservation laws of mass and energy. All the important components of turbine systems e.g. high pressure turbine, low pressure turbine, feed heaters, reheater, moisture separator have been considered. The details of the mathematical formulation of the model and open loop responses for specific disturbances are presented. (author)

Evaluation of different turbine concepts for wind power

Energy Technology Data Exchange (ETDEWEB)

Eriksson, Sandra; Bernhoff, Hans; Leijon, Mats [Swedish Centre for Renewable Electric Energy Conversion, Division for Electricity and Lightning Research, Box 534, 751 21 Uppsala (Sweden)

2008-06-15

Every year the number of installed wind power plants in the world increases. The horizontal axis wind turbine is the most common type of turbine but there exist other types. Here, three different wind turbines are considered; the horizontal axis wind turbine and two different concepts of vertical axis wind turbines; the Darrieus turbine and the H-rotor. This paper aims at making a comparative study of these three different wind turbines from the most important aspects including structural dynamics, control systems, maintenance, manufacturing and electrical equipment. A case study is presented where three different turbines are compared to each other. Furthermore, a study of blade areas for different turbines is presented. The vertical axis wind turbine appears to be advantageous to the horizontal axis wind turbine in several aspects. (author)

Steam turbines for PWR stations

International Nuclear Information System (INIS)

Muscroft, J.

1989-01-01

The thermodynamic cycle requirements and mechanical design features applying to modern GEC 3000 rev/min steam turbines for pressurised water reactor power stations are reviewed. The most recent developments include machines of 630 MW and 985 MW output which are currently under construction. The importance of service experience with nuclear wet steam turbines associated with a variety of types of water cooled reactor and its relevance to the design of modern 3000 rev/min turbines for pressurised water reactor applications is emphasised. (author)

Deflector plants turbine aeration

International Nuclear Information System (INIS)

Miller, D.E.; Sheppard, A.R.; Widener, D.W.

1991-01-01

Water quality requirements have become a focal point in recent re-licensing of hydroelectric projects. The Federal Energy Regulatory Commission has significantly increased the relevance of license conditions to insure that turbine discharges meet state or other specific criteria for dissolved oxygen (D.O.). Due to naturally occurring depletion of D.O. at increased depths in large reservoirs, water withdrawn from this strata may result in unacceptably low levels of D.O. Different researchers have evaluated various methods of improving D.O. content in hydro turbine discharges, including; diffusers, weirs, oxygen injection, and variations of turbine venting. The authors describe an approach called deflector plate turbine aeration. This computer based, engineered approach allows systems to be evaluated, designed, and installed with predictable performance and costs. Many experts in this field now agree that, to the extent practical, turbine venting offers the most dependable, maintenance free, and cost effective solution to the low D.O. problem. The approach presented in this paper has resulted in proven results

76 FR 10328 - Grant of Authority for Subzone Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs...

Science.gov (United States)

2011-02-24

... Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs, Blades and Towers), Brighton, Denver...-purpose subzone at the wind turbine nacelle, hub, blade and tower manufacturing and warehousing facilities... status for activity related to the manufacturing and warehousing of wind turbine nacelles, hubs, blades...

Technical diagnostics of steam turbines

International Nuclear Information System (INIS)

Vlckova, B.; Drahy, J.

1987-01-01

This paper deals with practical experience in application of technical diagnostics methods to steam turbines, in particular using pedestal and shaft vibration measurements as well as estimation of bearing metal temperature and ultrasound emission signals. An estimation of effectiveness of the diagnostics methods used is given on the basis of experimental investigations made on a 30-MW turbine. (author)

New low pressure (LP) turbines for NE Krsko

International Nuclear Information System (INIS)

Nemcic, K.; Novsak, M.

2004-01-01

During the evaluation of possible future maintenance strategies on steam turbine in very short period of time, engineering decision was made by NE Krsko in agreement with Owners to replace the existing two Low Pressure (LP) Turbines with new upgrading LP Turbines. This decision is presented with review of the various steam turbine problems as: SCC on turbine discs; blades cracking; erosion-corrosion with comparison of various maintenance options and efforts undertaken by the NE Krsko to improve performance of the original low pressure turbines. This paper presents the NEK approach to solve the possible future problems with steam turbine operation in NE Krsko as pro-active engineering and maintenance activities on the steam turbine. This paper also presents improvements involving retrofits, confined to the main steam turbine path, with major differences between original and new LP Turbines as beneficial replacement because of turbine MWe upgrading and return capital expenditures.(author)

Some aspects on wind turbines monitoring. General considerations and loads on horizontal wind turbines

Energy Technology Data Exchange (ETDEWEB)

Cuerva, A.

1996-12-01

The concept Monitoring applied to the Wind Energy technology is similar to the definition used in other branches of Science or Engineering, this is knowing values of variables which have to do with a mechanic system, in our case a wind turbine. These mentioned parameters may have different relationships to our wind turbine; some of them come from the environment the machine is operating in, others, are a measure of how properly the machine is working, and finally, the rest are an assessment of the ``system`s health`` during its ``life``. In this chapter we will answer questions such as: What do we need to measure? Why is Monitoring mandatory (from the different points of view of people involved in this world)? How can we measure a wind turbine depending on our objectives (Technic, tools, guidance, recommendations, etc)? And finally What can we expect in the near future?. The author wants the reader to keep the idea in mind that Monitoring means the richest and most accurate knowledge on wind turbine`s operation (Its environment, performances of health). This is the first step that allows us to optimize the operation mode of the machine and improve it (design, manufacturing, even the used modeling tools). When there is so much money involved, this fact becomes a must. (Author)

Corporate Governance as a Crucial Factor in Achieving Sustainable Corporate Performance

Directory of Open Access Journals (Sweden)

Julija Bistrova

2014-06-01

Full Text Available In the developed stock markets the corporate governance aspect is crucial in the stock portfolio selection process for investor seeking to achieve shareholder value sustainability. In the emerging markets the importance of the corporate governance role just starts to be realized by the investors and by the corporate managers. The present research, looking at the stock performance leaders and laggards, analyzes whether the corporate governance system matters to achieve long-term shareholder value within the Central and Eastern European stock markets universe. Corporate governance quality was assessed and compared among the out- and underperformers. The financial results plausibility and the ownership structure were considered as well. Additionally, the authors analyzed whether the quality of corporate governance influences the economic performance of the company. The obtained results provide the proof that the corporate governance does matter as the market outperformers have above average corporate governance quality and provide trustworthy financial results more often than the underperforming companies. Besides, well-governed companies are also able to deliver more attractive financial results.

45 CFR 1201.11 - Authority.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Authority. 1201.11 Section 1201.11 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION FOR NATIONAL AND COMMUNITY SERVICE PRODUCTION... Authority. The Corporation receives authority to change its governing regulations from the National and...

Sandia SWiFT Wind Turbine Manual.

Energy Technology Data Exchange (ETDEWEB)

White, Jonathan; LeBlanc, Bruce Philip; Berg, Jonathan Charles; Bryant, Joshua; Johnson, Wesley D.; Paquette, Joshua

2016-01-01

The Scaled Wind Farm Technology (SWiFT) facility, operated by Sandia National Laboratories for the U.S. Department of Energy's Wind and Water Power Program, is a wind energy research site with multiple wind turbines scaled for the experimental study of wake dynamics, advanced rotor development, turbine control, and advanced sensing for production-scale wind farms. The SWiFT site currently includes three variable-speed, pitch-regulated, three-bladed wind turbines. The six volumes of this manual provide a detailed description of the SWiFT wind turbines, including their operation and user interfaces, electrical and mechanical systems, assembly and commissioning procedures, and safety systems. Further dissemination only as authorized to U.S. Government agencies and their contractors; other requests shall be approved by the originating facility or higher DOE programmatic authority. 111 UNCLASSIFIED UNLIMITED RELEASE Sandia SWiFT Wind Turbine Manual (SAND2016-0746 ) approved by: Department Manager SWiFT Site Lead Dave Minster (6121) Date Jonathan White (6121) Date SWiFT Site Supervisor Dave Mitchell (6121) Date Note: Document revision logs are found after the title page of each volume of this manual. iv

Corporal punishment.

Science.gov (United States)

Bauman, L J; Friedman, S B

1998-04-01

Pediatricians differ on the optimal ways to discipline children. The major controversy surrounds the use of corporal punishment. In an effort to resolve this controversy, the American Academy of Pediatrics (AAP) cosponsored a conference entitled "The Short and Long-Term Consequences of Corporal Punishment" in February 1996. This article reviews scientific literature on corporal punishment and summarizes the proceedings from the conference. The authors conclude that, although the research data are inadequate to resolve the controversy, there are areas of consensus. Practitioners should assess the spanking practices of the parent they see and counsel parents to avoid those that are, by AAP consensus, dangerous, ineffective, or abusive.

Impact of Innovation and Places on Corporate Governance the Case of Wind Turbine Production

DEFF Research Database (Denmark)

Gunnarsson, Jan Sture Gunnar; Cikusa, Nikola Stefan; Hansen, Anca Daniela

2017-01-01

We examine how corporate governance changes over the industrial life cycle when places commit firms to certain governance structures. Focus is on industries where a significant part of the economic value is created by technological knowledge changing the conditions for corporate financing...

Landscape impact assessment for wind turbine development in Dyfed

International Nuclear Information System (INIS)

Blandford, C.; White, S.; Thomas, B.; Osment, F.

1994-01-01

The study aims to identify those areas in Dyfed where, in terms of landscape impact, local authorities might seek to exclude or encourage wind turbine development, provide guidelines which will assist local authorities in judging the impact of wind turbine developments on the landscape and provide a basis and framework for the preparation of planning policy guidelines for acceptable wind turbine and wind farm developments in Dyfed. The study context reviews current Government energy and planning policies for the encouragement of wind turbine developments. Dyfed County Council's relevant Structure Plan policies are also considered, as are the new draft policies relating directly to wind energy released by other authorities. The sizes and status of planning applications are summarised and the landscape implications and precedent set by the test case at Mynydd-y-Cemais is discussed. Public perception of wind power is reviewed in the context of research in Europe and the USA. (author)

Design of large steam turbines for PWR power stations

International Nuclear Information System (INIS)

Hobson, G.

1984-01-01

The authors review the thermodynamic cycle requirements for use with pressurized-water reactors, outline the way thermal efficiency is maximized, and discuss the special nature of the wet-steam cycle associated with turbines for this type of reactor. Machine and cycle parameters are optimized to achieve high thermal efficiency, particular attention being given to arrangements for water separation and steam reheating and to provisions for feedwater heating. Principles and details of mechanical design are considered for a range both of full-speed turbines running at 3000 rev/min on 50 Hz systems and of half-speed turbines running at 1800 rev/min on 60 Hz systems. The importance of service experience with nuclear wet-stream turbines, and its relevance to the design of modern turbines for PWR applications, is discussed. (author)

Interactive flow field around two Savonius turbines

Energy Technology Data Exchange (ETDEWEB)

Shigetomi, Akinari; Murai, Yuichi; Tasaka, Yuji; Takeda, Yasushi [Laboratory for Flow Control, Division of Energy and Environmental System, Faculty of Engineering, Hokkaido University, N13W8, Sapporo 060-8628 (Japan)

2011-02-15

The use of a Savonius type of vertical axis wind turbine is expanding in urban environments as a result of its ability to withstand turbulence as well as its relatively quiet operation. In the past, single turbine performance has been investigated primarily for determining the optimum blade configuration. In contrast, combining multiple Savonius turbines in the horizontal plane produces extra power in particular configurations. This results from the interaction between the two flow fields around individual turbines. To understand quantitatively the interaction mechanism, we measured the flow field around two Savonius turbines in close configurations using particle image velocimetry. The phase-averaged flow fields with respect to the rotation angle of the turbines revealed two types of power-improvement interactions. One comes from the Magnus effect that bends the main stream behind the turbine to provide additional rotation of the downstream turbine. The other is obtained from the periodic coupling of local flow between the two turbines, which is associated with vortex shedding and cyclic pressure fluctuations. Use of this knowledge will assist the design of packaged installations of multiple Savonius turbines. (author)

Corporate communication and impression management - New perspectives why companies engage in corporate social reporting

NARCIS (Netherlands)

Hooghiemstra, R

This paper addresses the theoretical framework on corporate social reporting. Although that corporate social reporting has been analysed from different perspectives, legitmacy theory currently is the dominating perspective. Authors employing this framework suggest that social and environmental

Noise immission from wind turbines

International Nuclear Information System (INIS)

1999-01-01

The project has dealt with practical ways to reduce the influence of background noise caused by wind acting on the measuring microphones. The uncertainty of measured noise emission (source strength) has been investigated. The main activity was a Round Robin Test involving measurements by five laboratories at the same wind turbine. Each laboratory brought its own instrumentation and performed the measurements and analyses according to their interpretation. The tonality of wind turbine noise is an essential component of the noise impact on the environment. In the present project the uncertainty in the newest existing methods for assessing tonality was investigated. The project included noise propagation measurements in different weather conditions around wind turbines situated in different types of terrain. The results were used to validate a noise propagation model developed in the project. Finally, the project also included a study with listeners evaluating recordings of wind turbine noise. The results are intended as guidance for wind turbine manufacturers in identifying the aspects of wind turbine noise most important to annoyance. (author)

Visiting places to see wind turbines. America and England edition; Fusha mitearuki. America, Igirisu hen

Energy Technology Data Exchange (ETDEWEB)

Okada, H.

1996-09-01

This paper introduces what were seen when visits were made in America and England to find and see wind power generators that can be used as an outdoor power supply for amateur radio operators. Visits were made to the Ames school town near Des Moines, Iowa, radio ham shops and World Power Technologies Corporation in Minneapolis, Minnesota, and Windstream Power System Corporation in Burlington, Vermont. Other manufacturers included NRG System Corporation, Atlantic Orient Corporation, and The New World Power Technology Corporation. Items of information, data and materials on small power wind generators were collected at each place visited. In England, a boat using a battery charger driven by a wind power generator made by VLM Corporation was inspected at a yacht harbor in Portsmouth, 100 km south-west of London. Other visits included LUMIC Corporation, a micro wind power generator manufacturer in Poole of the south coast, Kirmarnock, a maker of micro wind turbines and generators, and Proven Engineering Corporation in Glasgow, a manufacturer of wind power generators. 4 figs.

Author Details

African Journals Online (AJOL)

Abdul-Baki, Z. Vol 22, No 1 (2014) - Articles The Value-Adding Potentials of Corporate Social Responsibility Report Audit to Corporate Reporting in Nigerian Banks Abstract. ISSN: 2458-7435. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

Modern model of integrated corporate communication

Directory of Open Access Journals (Sweden)

Milica Slijepčević

2018-03-01

Full Text Available The main purpose of this paper is to present the modern model of integrated corporate communication. Beside this, the authors will describe the changes occurring in the corporate environment and importance of changing the model of corporate communication. This paper also discusses the importance of implementation of the suggested model, the use of new media and effects of these changes on corporations. The approach used in this paper is the literature review. The authors explore the importance of implementation of the suggested model and the new media in corporate communication, both internal and external, addressing all the stakeholders and communication contents. The paper recommends implementation of a modern model of integrated corporate communication as a response to constant development of the new media and generation changes taking place. Practical implications: the modern model of integrated corporate communication can be used as an upgrade of the conventional communication models. This modern model empowers companies to sustain and build up the existing relationships with stakeholders, and to find out and create new relationships with stakeholders who were previously inaccessible and invisible.

76 FR 63914 - Sabine River Authority of Texas and Sabine River Authority, State of Louisiana; Notice of...

Science.gov (United States)

2011-10-14

...-foot-high powerhouse located in the right abutment, containing two vertical Kaplan turbines with an... adjacent to the powerhouse. The Sabine River Authorities propose to construct a 1.3-MW minimum flow turbine...

Study of cavitation in hydro turbines. A review

Energy Technology Data Exchange (ETDEWEB)

Kumar, Pardeep; Saini, R.P. [Alternate Hydro Energy Centre, Indian Institute of Technology, Roorkee 247667 (India)

2010-01-15

Reaction turbines basically Francis turbines and propeller/Kaplan turbines are suitable for medium and low head hydropower sites. The management of the small hydropower plants is an important factor, for achieving higher efficiency of hydro turbines with time. Turbines show declined performance after few years of operation, as they get severely damaged due to various reasons. One of the important reasons is erosive wear of the turbines due to cavitation. Reaction turbines, however are more prone to cavitation especially Francis turbines where a zone in the operating range is seriously affected by cavitation and considered as forbidden zone. Cavitation is a phenomenon which manifests itself in the pitting of the metallic surfaces of turbine parts because of the formation of cavities. In the present paper, studies undertaken in this field by several investigators have been discussed extensively. Based on literature survey various aspects related to cavitation in hydro turbines, different causes for the declined performance and efficiency of the hydro turbines and suitable remedial measures suggested by various investigators have been discussed. (author)

Some aspects on wind turbines monitoring. General considerations and loads on horizontal wind turbines

International Nuclear Information System (INIS)

Cuerva, A.

1996-01-01

The concept Monitoring applied to the Wind Energy technology is similar to the definition used in other branches of Science or Engineering, this is knowing values of variables which have to do with a mechanic system, in our case a wind turbine. These mentioned parameters may have different relationships to our wind turbine; some of them come from the environment the machine is operating in, others, are a measure of how properly the machine is working, and finally, the rest are an assessment of the systems health during its life. In this chapter we will answer questions such as: What do we need to measure? Why is Monitoring mandatory (from the different points of view of people involved in this world)? How can we measure a wind turbine depending on our objectives (Technic, tools, guidance, recommendations, etc.)? And finally What can we expect in the near future? The author wants the reader to keep the idea in mind that Monitoring means the richest and most accurate knowledge on wind turbine's operation (Its environment, performances or health). This is the first step that allows us to optimize the operation mode of the machine and improve it (design, manufacturing, even the used modeling tools). When there is so much money involved, this fact becomes a must. (Author)

77 FR 52711 - Sabine River Authority of Texas and Sabine River Authority, State of Louisiana; Notice of...

Science.gov (United States)

2012-08-30

..., containing two vertical Kaplan turbines with an authorized installed capacity of 81 megawatts (MW); (5) a 220... construct a 1.3-MW minimum flow turbine-generator at the project spillway. The offer of settlement involves...

LP turbine retrofit modernization: Improvements in performance and operation

International Nuclear Information System (INIS)

Groenedaal, J.C.; Fowls, L.G.; Subbiah, R.; Maxwell, B.P.; Persson, B.

1996-01-01

Westinghouse Electric Corporation retrofitted six low pressure (LP) nuclear turbine rotors and associated blade path components at Ringhals 1, a 1960's vintage English Electric (GEC) unit located near Varobacka, Sweden, and operated by Vattenfall AB. This achieved significant performance improvements and provided improved mechanical features over the original equipment. This paper, discusses design, manufacture, installation, operation and project coordination. The retrofit processes employed for these units can be applied to any potential customers units

Corporate Support of Education: Some Strings Attached

Science.gov (United States)

Malott, Robert H.

1978-01-01

Corporate self-interest should guide corporate giving. Managers of publicly held corporations have the right, the capability, and the obligation to establish a philosophical screen to use in determining how shareholders' money is to be donated. (Author/MLF)

Factor analysis of processes of corporate culture formation at industrial enterprises of Ukraine

Directory of Open Access Journals (Sweden)

Illiashenko Sergii

2016-06-01

Full Text Available Authors have analyzed and synthesized the features of formation and development of the corporate culture at industrial enterprises of Ukraine and on this basis developed recommendations for application in the management of strategic development. During the research authors used the following general scientific methods: at research of patterns of interaction national culture, corporate culture and the culture of the individual authors used logical generalization method; for determining factors influencing corporate culture formation with the level of occurrence authors used factor analysis; for trend analysis of the corporate culture development at appropriate levels authors used comparative method. Results of the analysis showed that macro- and microfactors are external and mezofaktors (adaptability of business and corporate governance, corporate ethics, corporate social responsibility and personnel policies, corporate finance are internal for an enterprise. Authors have identified areas for each of the factors, itemized obstacles to the establishment and development of corporate culture at Ukrainian industrial enterprises and proposed recommendations for these processes management.

Turbine flow diagram of Paks-1 reactor

International Nuclear Information System (INIS)

Vancso, Tamas

1983-01-01

Computer calculations and programs are presented which inform the operators on the effect projected on the turbine and thermal efficiency of the modification in the flow diagram and in the starting parameters of the power cycle. In the program the expansion line of steam turbine type K-220-44 and the thermo-technical parameters of the elements of the feed-water heater system are determined. Detailed degree calculations for turbine unit of high pressure can be made. (author)

The Corporate Law Curriculum

Science.gov (United States)

Mofsky, James S.

1976-01-01

On the premise that corporate counsel must be an able diagnostician before he can focus on highly specialized and interrelated issues of business law, the author suggests an approach to corporate law curriculum in which the basic course balances the quality and quantity of material designed to create the needed sensitivity. (JT)

Nonlinear 3D calculations of turbine blade impact on turbine cover

International Nuclear Information System (INIS)

Hatala, B.; Adamik, V.; Buchar, J.

2000-01-01

This paper present the approach used at the VUJE institute for the evaluation of a ruptured blade impact on the current protection cover of a SKODA 220 MW turbine. Firstly, it briefly describes experiments (Hopkinson-Davies split bar facility, Taylor tests) and numerical simulations used to obtain realistic material parameters needed for the Cowper- Symonds material model that is implemented in the code LS-DYNA3D. Then, numerical simulations, by using the code, of the ruptured blade impact on various protection barriers are presented. These simulations make it possible to find an optimal solution for a new turbine protection cover. (author)

Lithuanian corporate tax accounting improvement solutions

OpenAIRE

Bružauskas, Valentinas; Stončiuvienė, Neringa

2012-01-01

The article sets out the research results of existing Corporate Tax accounting in Lithuania. There is disclosed the link between financial and Corporate Tax accounting, and their coordination improvement. The authors think that, the closer link between financial and tax accounting is obligatory. The provisions of Corporate Tax calculation should be adjusted with requirements of financial accounting. Also there is specified the methods of Corporate Tax reform and their feasibility. In the arti...

Annoyance rating of wind turbine noise

International Nuclear Information System (INIS)

Iredale, R.A.

1992-01-01

This paper proposes a simple criterion for noise limitation of wind turbines: 'The La A50 from a Wind Farm should not exceeding the L A50 of the wind generated background plus 5dB at any place of potential complaint'. This criterion is then examined and developed in the light of experience to date with turbine noise complaint and procedures. (author)

Wind turbines fundamentals, technologies, application, economics

CERN Document Server

Hau, Erich

2013-01-01

"Wind Turbines" addresses all those professionally involved in research, development, manufacture and operation of wind turbines. It provides a cross-disciplinary overview of modern wind turbine technology and an orientation in the associated technical, economic and environmental fields.  In its revised third edition, special emphasis has been given to the latest trends in wind turbine technology and design, such as gearless drive train concepts, as well as on new fields of application, in particular the offshore utilisation of wind energy. The author has gained experience over decades designing wind energy converters with a major industrial manufacturer and, more recently, in technical consulting and in the planning of large wind park installations, with special attention to economics.

Corporate crime: Criminological and cultural aspects

Directory of Open Access Journals (Sweden)

Keković Zoran

2011-01-01

Full Text Available The process of economic transition in Serbia has highlighted the problem of socially responsible behavior of corporations and especially the growing phenomenon of corporate crime. The consequences of corporate wrongdoing are almost everywhere and cannot be overseen. The most tremendous ones are those related to human casualties, environmental disasters, long-term negative health effects and great material budget losses on local and state levels. The fact that corporations are profiting from criminal activity which causes enormous damage to society and individuals makes public policy makers face the ultimate choice - either to devise new effective measures for reducing and controlling this phenomenon or to retain the standard model of crime control, in accordance with the principles of classical criminal law. The first choice would require one of the pillars of criminal law - the principle of individual and subjective guilt of physical persons as the exclusive grounds for imposing criminal liability - to be either modified and widened in order to be used as a base for imposing corporate criminal liability or partially changed by new criminal law categories which would introduce different grounds for imposing criminal liability on an organization. The second choice would require the decision-makers to refuse to change old and well-established principles. The criminal reality, however, has made most legislatures in Europe and around the world choose the first option and introduce different forms of corporate criminal liability. Serbian criminal legislation has been headed in the same direction since 2008, when it was changed in order to enable the imposing of liability for criminal acts on corporations. However, although corporate criminal liability is becoming the European legislative standard, one question remains - Is this the only measure of criminal politics which can be used as a means of reducing and preventing corporate crime? The authors

Fish passage assessment of an advanced hydropower turbine and conventional turbine using blade-strike modeling

Energy Technology Data Exchange (ETDEWEB)

Deng, Z.; Carlson, T. J.; Dauble, D. D.; Ploskey, G. R. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

2011-07-01

Hydropower is the largest renewable energy source in the world. However, in the Columbia and Snake River basins, several species of Pacific salmon and steelhead have been listed for protection under the Endangered Species Act due to significant declines of fish population. Dam operators and design engineers are thus faced with the task of making hydroelectric facilities more fish friendly through changes in hydro-turbine design and operation. Public Utility District No. 2 of Grant County, Washington, applied for relicensing from the U.S. Federal Energy Regulatory Commission to replace the 10 turbines at Wanapum Dam with advanced hydropower turbines that were designed to increase power generation and improve fish passage conditions. We applied both deterministic and stochastic blade-strike models to compare fish passage performance of the newly installed advanced turbine to an existing turbine. Modeled probabilities were compared to the results of a large-scale live-fish survival study and a Sensor Fish study under the same operational parameters. Overall, injury rates predicted by the deterministic model were higher than experimental rates of injury, while those predicted by the stochastic model were in close agreement with experimental results. Fish orientation at the time of entry into the plane of the leading edges of the turbine runner blades was an important factor contributing to uncertainty in modeled results. The advanced design turbine had slightly higher modeled injury rates than the existing turbine design; however, no statistical evidence suggested significant differences in blade-strike injuries between the two turbines, thus the hypothesis that direct fish survival rate through the advanced hydropower turbine is equal to or higher than that for fish passing through the conventional turbine could not be rejected. (authors)

76 FR 771 - Grant of Authority for Subzone Status; Dow Corning Corporation (Silicones); Carrollton...

Science.gov (United States)

2011-01-06

... Status; Dow Corning Corporation (Silicones); Carrollton, Elizabethtown and Shepherdsville, KY Pursuant to..., located in Carrollton, Elizabethtown and Shepherdsville, Kentucky (FTZ Docket 20-2009, filed 5-1-2009... Corning Corporation, located in Carrollton, Elizabethtown and Shepherdsville, Kentucky (Subzone 29K), as...

Documentation, User Support, and Verification of Wind Turbine and Plant Models

Energy Technology Data Exchange (ETDEWEB)

Robert Zavadil; Vadim Zheglov; Yuriy Kazachkov; Bo Gong; Juan Sanchez; Jun Li

2012-09-18

As part of the Utility Wind Energy Integration Group (UWIG) and EnerNex's Wind Turbine Modeling Project, EnerNex has received ARRA (federal stimulus) funding through the Department of Energy (DOE) to further the progress of wind turbine and wind plant models. Despite the large existing and planned wind generation deployment, industry-standard models for wind generation have not been formally adopted. Models commonly provided for interconnection studies are not adequate for use in general transmission planning studies, where public, non-proprietary, documented and validated models are needed. NERC MOD (North American Electric Reliability Corporation) reliability standards require that power flow and dynamics models be provided, in accordance with regional requirements and procedures. The goal of this project is to accelerate the appropriate use of generic wind turbine models for transmission network analysis by: (1) Defining proposed enhancements to the generic wind turbine model structures that would allow representation of more advanced; (2) Comparative testing of the generic models against more detailed (and sometimes proprietary) versions developed by turbine vendors; (3) Developing recommended parameters for the generic models to best mimic the performance of specific commercial wind turbines; (4) Documenting results of the comparative simulations in an application guide for users; (5) Conducting technology transfer activities in regional workshops for dissemination of knowledge and information gained, and to engage electric power and wind industry personnel in the project while underway; (6) Designing of a "living" homepage to establish an online resource for transmission planners.

Technology of turbine plant operating with wet steam

International Nuclear Information System (INIS)

1989-01-01

The technology of turbine plant operating with wet steam is a subject of continuing interest and importance, notably in view of the widespread use of wet steam cycles in nuclear power plants and the recent developments of advanced low pressure blading for both conventional and wet steam turbines. The nature of water formation in expanding steam has an important influence on the efficiency of turbine blading and on the integrity and safe operating life of blading and associated turbine and plant components. The subjects covered in this book include research, flow analysis and measurement, development and design of turbines and ancillary plant, selection of materials of construction, manufacturing methods and operating experience. (author)

19 CFR 141.18 - Entry by nonresident corporation.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Entry by nonresident corporation. 141.18 Section....18 Entry by nonresident corporation. A nonresident corporation (i.e., one which is not incorporated... entry is located who is authorized to accept service of process against that corporation or, in the case...

Impact of wind turbines on birds

International Nuclear Information System (INIS)

Clausager, I.; Nohr, H.

1996-01-01

The paper is a review of the present knowledge on impacts of wind turbines on birds, requested by the Danish Ministry of the Environment and Energy. The main conclusions of the review are, that in nearly all the studies so far the numbers of birds recorded colliding with wind turbines have been limited. Some studies indicate that stationary (breeding) birds inside the wind turbine area in the short run habituate to wind turbines, especially the noise and visual impacts, and that the risk for collision becomes low. However, some of the few more long term studies indicate that a negative impact may occur in later generations of breeding birds. In some studies a disturbance effect on bird species, which temporarily stay inside a wind turbine area in order to forage or rest, is observed. The degree of impact is species-specific. An effect is typically recorded inside a zone of up to 250-800 m, with geese and waders as the most sensitive groups of birds. (author)

CORPORATE SOCIAL RESPONSIBILITY – CORPORATE BRANDING RELATIONSHIP: AN EMPIRICAL COMPARATIVE STUDY

OpenAIRE

Bistra Vassileva

2009-01-01

Current academic research on the relationship of firms’ CSR activities with corporate branding typically focuses on consumers’ and shareholders’ viewpoints. This research aims to shed light on how organisational members in firms perceive to be the impact of CSR activities upon their corporate brand strategy. Using a survey administered to companies in the U.K. and Bulgaria, the author investigate, firstly, organisational members’ perceptions of the impact of different CSR-related activities u...

Features of the content of corporate contracts

Directory of Open Access Journals (Sweden)

Elena Petrovna Gladneva

2015-09-01

Full Text Available Objective to study the legal nature to reveal the peculiarities of the subject and other essential terms of corporate contracts as a technique and means of legal regulation of corporate relations. Methods general and specific methods of cognition dialectical formal logic analysis synthesis modeling structural and systemicfunctional methods as well as comparative legal logical legal historical legal grammatical methods and systemic interpretation. Results it is concluded that the object of corporate contracts includes terms about the features of implementation of corporate rights for shares and share in capital assets conditions order of the implementation of corporate rights and approval of other actions related to company management activity reorganization and liquidation the passive duty of corporate organizations to refrain from committing any action authority arising from the nature of corporate agreements as well as the active responsibilities associated with the certain implementation of corporate rights certified by stocks shares rights to stocks shares. In addition to the subject the content of corporate contractsincludes other essential necessary conditions stipulated by the corporate legislation norms and the agreement of the participants of economic entity. Scientific novelty for the first time taking into account modern achievements of civilistic jurisprudence and practice the authors investigate the relationship between the concepts of a civil contract and corporate contract give the definition of corporate contract show the specificity of the subject and other material terms of corporate contracts. Practical significance the findings can be taken into account in the further research of corporate law issues as subbranch of civil law used in law making and enforcement activities in the educational process as a teaching material in civil law. nbsp

An analytic approach to optimize tidal turbine fields

Science.gov (United States)

Pelz, P.; Metzler, M.

2013-12-01

Motivated by global warming due to CO2-emission various technologies for harvesting of energy from renewable sources are developed. Hydrokinetic turbines get applied to surface watercourse or tidal flow to gain electrical energy. Since the available power for hydrokinetic turbines is proportional to the projected cross section area, fields of turbines are installed to scale shaft power. Each hydrokinetic turbine of a field can be considered as a disk actuator. In [1], the first author derives the optimal operation point for hydropower in an open-channel. The present paper concerns about a 0-dimensional model of a disk-actuator in an open-channel flow with bypass, as a special case of [1]. Based on the energy equation, the continuity equation and the momentum balance an analytical approach is made to calculate the coefficient of performance for hydrokinetic turbines with bypass flow as function of the turbine head and the ratio of turbine width to channel width.

Corporate Politics on Polish Millennials

Directory of Open Access Journals (Sweden)

Natalia Roślik

2017-12-01

Full Text Available In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinational companies are paying special attention to Millennials and trying to hire them before competitors will do so. As a part of this paper, an author will describe corporate politics and practices on Thomson Reuters and BNY Mellon examples. Within this work, an author is also discussing key features and differences between this generation and Millennials parent’s generation. Additionally, there is a reference to corporate social responsibility concept and work-life balance issues.

System control model of a turbine for a BWR

International Nuclear Information System (INIS)

Vargas O, Y.; Amador G, R.; Ortiz V, J.; Castillo D, R.; Delfin L, A.

2009-10-01

In this work is presented a design of a control system of a turbine for a nuclear power plant with a BWR like energy source. The model seeks to implement later on at thermal hydraulics code of better estimate RELAP/SCDAPSIM. The model is developed for control and protection of turbine, and the consequent protection to the BWR, considering that the turbine control could be employed for one or several turbines in series. The quality of present designs of control pattern of turbine it is that it considers the parameters more important in the operation of a turbine besides that is has incorporated at control the secondary parameters that will be activated originally as true when the turbine model is substituted by a model more detailed. The development of control model of a turbine will be good in short and medium term to realize analysis about the operation of turbine with different operation conditions, of vapor extraction specific steps of turbine to feed other equipment s, besides analyzing the separate effect and integrated effect. (Author)

Prospects and Challenges of Corporate Governance in Ghana

OpenAIRE

Agyemang, Otuo Serebour; Aboagye, Emmanuel; Ahali, Aaron Yao Ofoe

2013-01-01

The relevance of corporate governance principles in the management of corporate organisations cannot be underestimated. The increasing influence of principles of corporate governance across the globe has been greatly linked to the recent corporate frauds and scandals. These frauds and scandals largely resulted from the failure of authorities of countries to effectively implement the legal and regulatory frameworks pertaining to corporate governance. Ghana is archetypal in regards to the failu...

Design analysis of vertical wind turbine with airfoil variation

Science.gov (United States)

Maulana, Muhammad Ilham; Qaedy, T. Masykur Al; Nawawi, Muhammad

2016-03-01

With an ever increasing electrical energy crisis occurring in the Banda Aceh City, it will be important to investigate alternative methods of generating power in ways different than fossil fuels. In fact, one of the biggest sources of energy in Aceh is wind energy. It can be harnessed not only by big corporations but also by individuals using Vertical Axis Wind Turbines (VAWT). This paper presents a three-dimensional CFD analysis of the influence of airfoil design on performance of a Darrieus-type vertical-axis wind turbine (VAWT). The main objective of this paper is to develop an airfoil design for NACA 63-series vertical axis wind turbine, for average wind velocity 2,5 m/s. To utilize both lift and drag force, some of designs of airfoil are analyzed using a commercial computational fluid dynamics solver such us Fluent. Simulation is performed for this airfoil at different angles of attach rearranging from -12°, -8°, -4°, 0°, 4°, 8°, and 12°. The analysis showed that the significant enhancement in value of lift coefficient for airfoil NACA 63-series is occurred for NACA 63-412.

Gas turbine

International Nuclear Information System (INIS)

Yang, Ok Ryong

2004-01-01

This book introduces gas turbine cycle explaining general thing of gas turbine, full gas turbine cycle, Ericson cycle and Brayton cycle, practical gas turbine cycle without pressure loss, multiaxial type gas turbine cycle and special gas turbine cycle, application of basic theory on a study on suction-cooling gas turbine cycle with turbo-refrigerating machine using the bleed air, and general performance characteristics of the suction-cooling gas turbine cycle combined with absorption-type refrigerating machine.

Power Curve of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.

1992-01-01

The experimental wind turbine AWEC-60 was developed to evaluate the possibilities of the Large Wind turbines, from the technical and economical point of view. The project was developed by a spanish-german group, integrated by Union Fenosa, Asinel, M.A.N. Neue Technologie and the Instituto de Energias Renovables from CIEMAT, starting the operation during the year 1990. In this paper, the obtention of the wind turbine power curve is presented, which has been obtained in agreement with the Recommended Practices for Wind Turbine Testing and Evaluation from the Executive Committee for the Research and Development on Wind Energy, of the International Energy Agency (AIE). Using the functioning data of the wind turbine correspondig to the first quarter of the year 1991, the power curves have been obtained, and the results have been compared with the curves measured in other similar Large wind turbines. (Author) 7 refs

General characteristics and technical subjects on helium closed cycle gas turbine

International Nuclear Information System (INIS)

Shimomura, Hiroaki

1996-06-01

Making the subjects clarified on nuclear-heated gas turbine that will apply the inherent features of HTGR, the present paper discusses the difference of the helium closed cycle gas turbine, which is a candidate of nuclear gas turbine, with the open cycle gas turbine and indicates inherent problems of closed cycle gas turbine, its effects onto thermal efficiency and turbine output and difficulties due to the pressure ratio and specific speed from use of helium. The paper also discusses effects of the external pressure losses onto the efficiencies of compressor and turbine that are major components of the gas turbine. According to the discussions above, the paper concludes indicating the key idea on heat exchangers for the closed cycle gas turbine and design basis to solve the problems and finally offers new gas turbine conception using nitrogen or air that is changeable into open cycle gas turbine. (author)

12 CFR 995.4 - Book-entry procedure for Financing Corporation obligations.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Book-entry procedure for Financing Corporation... FINANCING CORPORATION OPERATIONS § 995.4 Book-entry procedure for Financing Corporation obligations. (a) Authority. Any Federal Reserve Bank shall have authority to apply book-entry procedure to Financing...

Implementation of the corporate governance code as a measure of an efficiency increasing process in corporate management

Directory of Open Access Journals (Sweden)

Ana SPÎNU

2017-03-01

Full Text Available The majority of leaders of economic entities in Moldova should recognize the role of effective corporate management for the proper development of their activities. Therefore, to ensure obtaining competitive advantage, the leaders must accept the fact that the policy of improvement of corporate management becomes a major component of enterprise development, and using the principles and best practices of corporate governance are already highlighted both at the level of their enterprises and at international level. Therefore, the authors of the article present some measures to streamline corporate management.

Corporate Branding and Corporate Reputation

DEFF Research Database (Denmark)

Karmark, Esben

2013-01-01

Corporate branding has been seen as developing in “waves”. This chapter explores the links between corporate branding and corporate reputation as they emerge in the context of three waves of corporate branding. It highlights the way in which the two constructs have related to each other through o...... for corporate brands and corporate communication.......Corporate branding has been seen as developing in “waves”. This chapter explores the links between corporate branding and corporate reputation as they emerge in the context of three waves of corporate branding. It highlights the way in which the two constructs have related to each other through...... organizational culture and identity, and how, although characterized by parallel developments, new ideas and models from a “third” wave of corporate branding challenge prevailing assumptions of corporate reputation particularly in terms of the assumptions that reputations emerge from authentic and transparent...

Logical model for the control of a BWR turbine

International Nuclear Information System (INIS)

Vargas O, Y.; Amador G, R.; Ortiz V, J.; Castillo D, R.

2009-01-01

In this work a design of a logical model is presented for the turbine control of a nuclear power plant with a BWR like energy source. The model is sought to implement later on inside the thermal hydraulics code of better estimate RELAP/SCDAPSIM. The logical model is developed for the control and protection of the turbine, and the consequent protection to the BWR, considering that the turbine control will be been able to use for one or several turbines in series. The quality of the present design of the logical model of the turbine control is that it considers the most important parameters in the operation of a turbine, besides that they have incorporated to the logical model the secondary parameters that will be activated originally as true when the turbine model is substituted by a detailed model. The development of the logical model of a turbine will be of utility in the short and medium term to carry out analysis on the turbine operation with different operation conditions, of vapor extraction, specific steps of the turbine to feed other equipment s, in addition to analyze the separate and the integrated effect. (Author)

Current status of self rectifying air turbines for wave energy conversion

International Nuclear Information System (INIS)

Setoguchi, Toshiaki; Takao, Manabu

2006-01-01

This paper reviews the present state of the art on self rectifying air turbines, which could be used for wave energy conversion. The overall performances of the turbines under irregular wave conditions, which typically occur in the sea, have been evaluated numerically and compared from the viewpoints of their starting and running characteristics. The types of turbine included in the paper are: (a) Wells turbine with guide vanes (WTGV); (b) turbine with self-pitch-controlled blades (TSCB); (c) biplane Wells turbine with guide vanes (BWGV); (d) impulse turbine with self-pitch-controlled guide vanes (ISGV); and (e) impulse turbine with fixed guide vanes (IFGV). As a result, under irregular wave conditions, it is found that the running and starting characteristics of impulse type turbines could be superior to those of the Wells turbine. Moreover, the authors have explained the mechanism of the hysteretic behavior of the Wells turbine and the necessity of links for improvement of the performance of the ISGV

CORPORATE SOCIAL RESPONSIBILITY – CORPORATE BRANDING RELATIONSHIP: AN EMPIRICAL COMPARATIVE STUDY

Directory of Open Access Journals (Sweden)

Bistra VASSILEVA

2009-01-01

Full Text Available Current academic research on the relationship of firms’ CSR activities with corporate branding typically focuses on consumers’ and shareholders’ viewpoints. This research aims to shed light on how organisational members in firms perceive to be the impact of CSR activities upon their corporate brand strategy. Using a survey administered to companies in the U.K. and Bulgaria, the author investigate, firstly, organisational members’ perceptions of the impact of different CSR-related activities upon corporate branding and, secondly, their beliefs about what customers and shareholders think are the impacts of CSR-related activities upon brand image and brand identity. The findings indicated that while organisational members rated quality products, customer service and corporate governance highly as key components of CSR activity, they were much more ambivalent about their companies'commitment to broader actions which involve the 'community' and 'society'. This paper concludes by discussing the implications of the findings for future 'CSR education' among companies.

Noise from wind turbines

Energy Technology Data Exchange (ETDEWEB)

Fegeant, Olivier [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Building Sciences

2002-02-01

A rapid growth of installed wind power capacity is expected in the next few years. However, the siting of wind turbines on a large scale raises concerns about their environmental impact, notably with respect to noise. To this end, variable speed wind turbines offer a promising solution for applications in densely populated areas like the European countries, as this design would enable an efficient utilisation of the masking effect due to ambient noise. In rural and recreational areas where wind turbines are sited, the ambient noise originates from the action of wind on the vegetation and about the listener's ear (pseudo-noise). It shows a wind speed dependence similar to that of the noise from a variable speed wind turbine and can therefore mask the latter for a wide range of conditions. However, a problem inherent to the design of these machines is their proclivity to pure tone generation, because of the enhanced difficulty of avoiding structural resonances in the mechanical parts. Pure tones are deemed highly annoying and are severely regulated by most noise policies. In relation to this problem, the vibration transmission of structure-borne sound to the tower of the turbine is investigated, in particular when the tower is stiffened at its upper end. Furthermore, since noise annoyance due to wind turbine is mostly a masking issue, the wind-related sources of ambient noise are studied and their masking potentials assessed. With this aim, prediction models for wind-induced vegetation noise and pseudo-noise have been developed. Finally, closely related to the effect of masking, is the difficulty, regularly encountered by local authorities and wind farm developers, to measure noise immission from wind turbines. A new measurement technique has thus been developed in the course of this work. Through improving the signal-to-noise ratio between wind turbine noise and ambient noise, the new technique yields more accurate measurement results.

Improvement of wells turbine performance by means of 3D guide vanes; Sanjigen annai hane ni yoru wells turbine seino no kaizen

Energy Technology Data Exchange (ETDEWEB)

Takao, M.; Kim, T.H. [Saga University, Saga (Japan); Setoguchi, T. [Saga University, Saga (Japan). Faculty of Science and Engineering; Inoue, M. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

2000-02-25

Performance of a Wells turbine was improved by equipping 3D guide vanes before and behind a rotor. For further improvement, 3D guide vanes have been proposed in this paper. The performance of the Wells turbine with 2D and 3D guide vanes have been investigated experimentally by model testing under steady flow conditions. Then, the running and starting characteristics in irregular ocean waves have been obtained by a computer simulation. As a result, it is found that both of the running and starting characteristics of the Wells turbine with 3D guide vanes are superior to those of the turbine with 2D guide vanes. (author)

Conceptual design and costs of large wind turbines

International Nuclear Information System (INIS)

Hau, E.; Harrison, R.; Cockerill, T.T.; Snel, H.

1996-01-01

The development of large wind turbines, with capacities in excess of 1 MW is reviewed. Despite statistical evidence to the contrary, there are some reasons to be optimistic that further development will render large machines economic for commercial uses. The direction in which such development should proceed is unclear, however. A cost model, founded on the principles of conceptual design, with the objective of evaluating large wind turbine design options is described. Use of the model allows conclusions to be drawn regarding the potential for development of certain large wind turbine configurations. (author)

Applications of aero-acoustic analysis to wind turbine noise control

International Nuclear Information System (INIS)

Lowson, M.V.

1992-01-01

Wind turbine noise generation mechanisms are essentially equivalent to the aero-acoustic mechanisms of other rotors, which have been studied in depth for many years. Basic sources for the wind turbine noise radiation process are defined, and their significance assessed. From the analysis, areas of potential improvement in wind turbine noise prediction are defined. Suggestions are made for approaches to wind turbine noise control which separate the noise problems at cut-in from those at rated power. Some of these offer the possibility of noise reduction without unfavourable effects on performance. (author)

Applications of aero-acoustic analysis to wind turbine noise control

International Nuclear Information System (INIS)

Lowson, M.

1993-01-01

Wind turbine noise generation mechanisms are essentially equivalent to the aero-acoustic mechanisms of other rotors, which have been studied in depth for many years. Basic sources for the wind turbine noise radiation process are defined, and their significance assessed. From the analysis, areas of potential improvement in wind turbine noise prediction are defined. Suggestions are made for approaches to wind turbine noise control which separate the noise problems at cut-in from those at rated power. Some of these offer the possibility of noise reduction without unfavourable effects on performance. (author)

Corporate Civil Disobedience in the Consumer Interest.

Science.gov (United States)

Dennis, Michael R.; And Others

1994-01-01

Through catalytic issue management, corporations proactively seek to affect resolutions of issues in which they have some interest. Corporations now catalyze legal changes by purposely disobeying existing law, facing the associated consequences, and lobbying for desired changes. (Author)

The social acceptability of wind turbines: some resident are ready to pay to keep their wind turbines. Survey on four French wind farms

International Nuclear Information System (INIS)

2009-06-01

The authors report a study which aimed at exploiting and deepening the results of a 2001 survey on visual and sound disturbances caused by wind turbines in Sigean (Aude), at identifying all the attitudes and opinions with respect with wind energy, and at assessing the different characteristics of a wind farm (height, localization, and so on). A survey has been performed on four sites located in different French regions. The authors discuss the social-demographic characteristics of the population samples, the global opinion on wind energy, and the opinion of the people on wind turbines located in their neighbourhood. They propose an estimation of benefits and damages related to the vicinity of wind turbines. By applying a method of choice experiments, they reveal the preferences of residents

Development of biomass gasification systems for gas turbine power generation

International Nuclear Information System (INIS)

Larson, E.D.; Svenningsson, P.

1991-01-01

Gas turbines are of interest for biomass applications because, unlike steam turbines, they have relatively high efficiencies and low unit capital costs in the small sizes appropriate for biomass installations. Gasification is a simple and efficient way to make biomass usable in gas turbines. The authors evaluate here the technical requirements for gas turbine power generation with biomass gas and the status of pressurized biomass gasification and hot gas cleanup systems. They also discuss the economics of gasifier-gas turbine cycles and make some comparisons with competing technologies. Their analysis indicates that biomass gasifiers fueling advanced gas turbines are promising for cost-competitive cogeneration and central station power generation. Gasifier-gas turbine systems are not available commercially, but could probably be developed in 3 to 5 years. Extensive past work related to coal gasification and pressurized combustion of solid fuels for gas turbines would be relevant in this effort, as would work on pressurized biomass gasification for methanol synthesis

Offshore wind turbines reliability, availability and maintenance

CERN Document Server

Tavner, Peter

2012-01-01

The first book to specifically focus on offshore wind turbine technology and which addresses practically wind turbine reliability and availability. The book draws on the author's experience of power generation reliability and availability and the condition monitoring of that plant to describe the problems facing the developers of offshore wind farms and the solutions available to them to raise availability, reduce cost of energy and improve through life cost.

TurbinAID

International Nuclear Information System (INIS)

Moradian, M.A.; Chow, M.P.; Osborne, R.L.; Jenkins, M.A.

1991-01-01

The Westinghouse Turbine Artificial Intelligence Diagnostics system or TurbinAID, can diagnose both thermodynamic and mechanical component anomalies within the turbine, and around the turbine cycle. any monitoring system can detect that a variable is in an abnormal state, but TurbinAID can also indicate the cause, and provide recommended corrective action(s). The TurbinAID Expert Systems utilize multiple sensor and variable inputs, and their interdependencies in the generation of a diagnosis. The system performs sensor validation as part of the data acquisition scheme. The TurbinAID system has been in operation for several years. This paper describes the monitoring and diagnostic functions provided by TurbinAID, and how the utility industry both nuclear and fossil, can utilize the system to enhance unit operation

Corporate Author Entries. Revision 5

International Nuclear Information System (INIS)

Hendricks, P.L.

1986-05-01

This reference authority has been created and is maintained to provide standard forms for recording the names of organizations consistently in bibliographic citations. This revision includes approximately 42,000 entries established since 1973

78 FR 23472 - Amendments to Existing Validated End-User Authorizations: CSMC Technologies Corporation in the...

Science.gov (United States)

2013-04-19

... Corporation in the People's Republic of China (PRC) AGENCY: Bureau of Industry and Security, Commerce. ACTION... Technologies Corporation (CSMC) in the People's Republic of China (PRC). Specifically, BIS amends Supplement No... comment are not required under the APA or by any other law, the analytical requirements of the Regulatory...

Prospects of power conversion technology of direct-cycle helium gas turbine for MHTGR

International Nuclear Information System (INIS)

Li Yong; Zhang Zuoyi

1999-01-01

The modular high temperature gas cooled reactor (MHTGR) is a modern passively safe reactor. The reactor and helium gas turbine may be combined for high efficiency's power conversion, because MHTGR has high outlet temperature up to 950 degree C. Two different schemes are planed separately by USA and South Africa. the helium gas turbine methodologies adopted by them are mainly based on the developed heavy duty industrial and aviation gas turbine technology. The author introduces the differences of two technologies and some design issues in the design and manufacture. Moreover, the author conclude that directly coupling a closed Brayton cycle gas turbine concept to the passively safe MHTGR is the developing direction of MHTGR due to its efficiency which is much higher than that of using steam turbine

31 CFR 210.4 - Authorizations and revocations of authorizations.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Authorizations and revocations of authorizations. 210.4 Section 210.4 Money and Finance: Treasury Regulations Relating to Money and Finance... corporate action, or the appointment of a receiver, conservator, or liquidator for the RDFI. In any such...

THE SOUND OF CORPORATE GOVERNANCE

Directory of Open Access Journals (Sweden)

DUMITRASCU LUMINITA MIHAELA

2012-07-01

Full Text Available The paper explores the corporate governance and corporate social responsibility in music industry, by reviewing the literature and investigating the aspects in the context of a sample made by top companies in this domain. The paper spotlighting the mutual connections between corporate governance and corporate social responsibility. The research methodology used consists in investigate the corporate governance codes. It’s about a qualitative interpretive research methodology that was adopted. The findings suggest the intercorelation of corporate governance with corporate social responsibility. The main contribution of the author consists in the fact that the added value of this paper and the original contribution leads in the intercorelation of these two aspects of corporate governance and corporate social responsibility, the findings beeing interesting, implying that recent preoccupation with corporate governance in music industry is starting to be equable by some attention to social responsibility aspects, with growing appreciation of their interdependencies. Previous literature has researched corporate governance and corporate social responsibility independently. Due to this fact, this paper is considering them jointly. The paper is important for both practical and theoretical aspects: for managers and also can serve as the basis for future research on this topic. The current paper is realized in the doctoral program entitled “PhD in Economics at the Standards of European Knowledge- DoEsEc”, scientific coordinator Prof. PhD Niculae Feleaga, Institution: The Academy of Economic Studies Bucharest, Faculty of Accounting and Management Informatic System, Department of International Accounting, period of research 2009-2012.

The Corporations Act 2001

OpenAIRE

Bostock, Tom

2002-01-01

The author outlines reforms made in Australia in the area of company law with an analysis of the Corporations Act 2001, which along with the Australian Securities and Investments Commission Act 2001 comprises Corporations legislation in Australia. Article by Tom Bostock (a partner in the law firm Mallesons Stephen Jaques, Melbourne, Australia). Published in Amicus Curiae - Journal of the Institute of Advanced Legal Studies and its Society for Advanced Legal Studies. The Journal is produced by...

Design of a wind turbine-generator system considering the conformability to wind velocity fluctuations

Energy Technology Data Exchange (ETDEWEB)

Wakui, Tetsuya; Hashizume, Takumi; Outa, Eisuke

1999-07-01

The conformability of the rated power output of the wind turbine-generator system and of the wind turbine type to wind velocity fluctuations are investigated with a simulation model. The authors examine three types of wind turbines: the Darrieus-Savonius hybrid, the Darrieus proper and the Propeller. These systems are mainly operated at a constant tip speed ratio, which refers to a maximum power coefficient points. As a computed result of the net extracting power, the Darrieus turbine proper has little conformability to wind velocity fluctuations because of its output characteristics. As for the other turbines, large-scale systems do not always have an advantage over small-scale systems as the effect of its dynamic characteristics. Furthermore, it is confirmed that the net extracting power of the Propeller turbine, under wind direction fluctuation, is much reduced when compared with the hybrid wind turbine. Thus, the authors conclude that the appropriate rated power output of the system exists with relation to the wind turbine type for each wind condition.

Fault ride-through capability of DFIG wind turbines

Energy Technology Data Exchange (ETDEWEB)

Hansen, Anca D. [Risoe National Laboratory, Wind Energy Department, P.O. Box 49, DK-4000 Roskilde (Denmark); Michalke, Gabriele [Darmstadt University, Institute for Electrical Power Systems, Landgraf-Georg-Strasse 4, 64283 Darmstadt (Germany)

2007-07-15

This paper concentrates on the fault ride-through capability of doubly fed induction generator (DFIG) wind turbines. The main attention in the paper is, therefore, drawn to the control of the DFIG wind turbine and of its power converter and to the ability to protect itself without disconnection during grid faults. The paper provides also an overview on the interaction between variable-speed DFIG wind turbines and the power system subjected to disturbances, such as short circuit faults. The dynamic model of DFIG wind turbine includes models for both mechanical components as well as for all electrical components, controllers and for the protection device of DFIG necessary during grid faults. The viewpoint of the paper is to carry out different simulations to provide insight and understanding of the grid fault impact on both DFIG wind turbines and on the power system itself. The dynamic behaviour of DFIG wind turbines during grid faults is simulated and assessed by using a transmission power system generic model developed and delivered by the Danish Transmission System Operator Energinet.dk in the power system simulation toolbox PowerFactory DIgSILENT. The data for the wind turbines are not linked to a specific manufacturer, but are representative for the turbine and generator type used in variable-speed DFIG wind turbines with pitch control. (author)

HTR plus modern turbine technology for higher efficiencies

International Nuclear Information System (INIS)

Barnert, H.; Kugeler, K.

1996-01-01

The recent efficiency race for natural gas fired power plants with gas-plus steam-turbine-cycle, is shortly reviewed. The question 'can the HTR compete with high efficiencies?' is answered: Yes, it can - in principle. The gas-plus steam-turbine cycle, also called combi-cycle, is proposed to be taken into consideration here. A comparative study on the efficiency potential is made; it yields 54.5% at 1,050 deg. C gas turbine-inlet temperature. The mechanisms of release versus temperature in the HTR are summarized from the safety report of the HTR MODUL. A short reference is made to the experiences from the HTR-Helium Turbine Project HHT, which was performed in the Federal Republic of Germany in 1968 to 1981. (author). 8 figs,. 1 tab

HTR plus modern turbine technology for higher efficiencies

Energy Technology Data Exchange (ETDEWEB)

Barnert, H; Kugeler, K [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Sicherheitsforschung und Reaktortechnik

1996-08-01

The recent efficiency race for natural gas fired power plants with gas-plus steam-turbine-cycle, is shortly reviewed. The question `can the HTR compete with high efficiencies?` is answered: Yes, it can - in principle. The gas-plus steam-turbine cycle, also called combi-cycle, is proposed to be taken into consideration here. A comparative study on the efficiency potential is made; it yields 54.5% at 1,050 deg. C gas turbine-inlet temperature. The mechanisms of release versus temperature in the HTR are summarized from the safety report of the HTR MODUL. A short reference is made to the experiences from the HTR-Helium Turbine Project HHT, which was performed in the Federal Republic of Germany in 1968 to 1981. (author). 8 figs,. 1 tab.

Innovative multi rotor wind turbine designs

Energy Technology Data Exchange (ETDEWEB)

Kale, S.A.; Sapali, S.N. [College of Engineering. Mechanical Engineering Dept, Pune (India)

2012-07-01

Among the renewable energy sources, today wind energy is the most recognized and cost effective. Developers and researchers in this sector are optimistic and continuously working innovatively to improve the technology. The wind power obtained is proportional to the swept area of wind turbine. The swept area is increased by using a single rotor of large diameter or multi rotors in array. The rotor size is growing continuously with mature technology. Multi rotor technology has a long history and the multi rotor concept persists in a variety of modern innovative systems but the concept has fallen out of consideration in mainstream design from the perception that is complex and unnecessary as very large single rotor units are now technically feasible. This work addresses the evaluation of different multi rotor wind turbine systems. These innovative wind turbines are evaluated on the basis of feasibility, technological advantages, security of expected power performance, cost, reliability, impact of innovative system, comparison with existing wind turbine design. The findings of this work will provide guidelines for the practical and economical ways for further research on the multi rotor wind turbines. (Author)

Power curve of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.

1992-01-01

The experimental wind turbine AWEC-60 was developed to evaluate the possibilities of the Large Wind turbines, from the technical and economical point of view. The project was developed by a spanish-german group, integrated by Union Fenosa, Asinel, M.A.N. Neue Technologie and the Instituto de Energias Renovables from CIEMAT, starting the operation during the year 1990. In this paper, the obtention of the wind turbine's power curve is presented, which has been obtained in agreement with the 'Recommended Practices for Wind Turbine Testing and Evaluation' from the Executive Committee for the Research and Development on Wind Energy, of the International Energy Agency (AIE). Using the functioning data of the wind turbine corresponding to the first quarter of the year 1991, the power curves have been obtained, and the results have been compared with the curves measured in other similar large windturbines. (author)

Saturated steam turbines for power reactors of WWER-type

International Nuclear Information System (INIS)

Czwiertnia, K.

1978-01-01

The publication deals with design problems of large turbines for saturated steam and with problem of output limitations of single shaft normal speed units. The possibility of unification of conventional and nuclear turbines, which creates the economic basis for production of both types of turbines by one manufacturer based on standarized elements and assemblies is underlined. As separate problems the distribution of nuclear district heating power systems are considered. The choice of heat diagram for district heating saturated steam turbines, the advantages of different diagrams and evaluaton for further development are presented. On this basis a program of unified turbines both condensing and district heating type suitable for Soviet reactors of WWER-440 and WWER-1000 type for planned development of nuclear power in Poland is proposed. (author)

Design of large steam turbines for PWR power stations

International Nuclear Information System (INIS)

Hobson, G.; Muscroft, J.

1983-01-01

The thermodynamic cycle requirements for use with pressurized water reactors are reviewed and the manner in which thermal efficiency is maximised is outlined. The special nature of the wet steam cycle associated with turbines for this type of reactor is discussed. Machine and cycle parameters are optimised to achieve high thermal efficiency, particular attention being given to arrangements for water separation and steam reheating and to provisions for feedwater heating. Principles and details of mechanical design are considered for a range of both full-speed turbines running at 3000 rpm on 50 Hz systems and half-speed turbines running at 1800 rpm on 60 Hz systems. The importance of service experience with nuclear wet steam turbines and its relevance to the design of modern turbines for pressurized water reactor applications is discussed. (author)

Matching of wind turbine type and system scale to wind conditions; Chiten no fukyo ni taisuru furyoku turbine no keitai to sytem taikaku no seigosei ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Wakui, T. [Japan Society for the Promotion of Science, Tokyo (Japan); Tanzawa, Y. [Nippon Institute of Technology, Saitama (Japan); Ota, E. [Waseda University, Tokyo (Japan). School of Science and Engineering; Hashizume, T.

2000-09-25

The matching of the wind turbine type and system scale of the stand-alone wind turbine generator system to wind conditions is investigated using our dynamic simulation model. This paper examines three types of wind turbines: the Darrieus-Savonius hybrid wind turbine, the Darrieus turbine proper and the up-wind Propeller turbine. These systems are mainly operated at a constant tip speed ratio, which refers to a maximum power coefficient. As a computed result of the net extracting energy under fluctuations of wind speed and direction, the Darrieus turbine proper has little conformability to wind fluctuations because of its output characteristics. As for other wind turbines, large-scale systems do not always have advantages over small-scale systems as the effect of the dynamic characteristics. Furthermore, it is confirmed that the net extracting power of the Propeller turbine under wind direction fluctuations is much reduced when compared with that of the hybrid wind turbine. Thus, it is concluded that the appropriate wind turbine type and system scale exist for each wind condition. (author)

12 CFR 1408.4 - Delegation of authority.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Delegation of authority. 1408.4 Section 1408.4 Banks and Banking FARM CREDIT SYSTEM INSURANCE CORPORATION COLLECTION OF CLAIMS OWED THE UNITED STATES Administrative Collection of Claims § 1408.4 Delegation of authority. The Corporation official(s) designated by...

Author Details

African Journals Online (AJOL)

Aredom, M. Vol 8, No 1 (2014) - Articles Comparative Study on Wind Power using Meteorological Data and Wind Turbine Output at Ashogoda Village, Northern Ethiopia Abstract PDF. ISSN: 1992-0407. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about ...

Author Details

African Journals Online (AJOL)

Ahmed, S. Vol 2, No 12 (2010) - Articles Investigation of blade performance of horizontal axis wind turbine based on blade element momentum theory (BEMT) using NACA airfoils. Abstract PDF. ISSN: 2141-2839. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More ...

Author Details

African Journals Online (AJOL)

Reid, Tim. Vol 64 (2013) - Articles New project examining Bearded Vulture movements in southern Africa to inform wind turbine placement. Abstract PDF. ISSN: 1606-7479. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Bedoud, Khouloud. Vol 32 (2016) - Articles Assessment and analysis of wind energy generation and power control of wind turbine system. Abstract PDF. ISSN: 2352-9717. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Transformation processes of the corporate development in Russia: corporate social responsibility

Directory of Open Access Journals (Sweden)

Zhanna Sergeyevna Belyayeva

2011-03-01

Full Text Available Financial and economic crises made the level of readiness to changes in the different types of organizations throughout the world and Russia visible. Variation of social and economic programmes implemented by governmental and corporate sectors is widely seen; not all of them work positively for the population, especially in the countries with emerging markets. At the same time, twenty years of the market economy in Russia, for instance, have definitely built a new social and economic system, but whether it has changed fundamentally in the management techniques? This research generalizes some trends of the corporate development in Russia in the context of social responsibility and socio-economic transformation. The author attempts to define Russia's place on the world map of corporate social responsibility. The opportunities for Russia to learn from foreign experience are also examined.

The sound power measurement and certification of wind turbines

International Nuclear Information System (INIS)

MacKinnon, A.; Henderson, R.

1992-01-01

It is anticipated that there will be a substantial growth in the exploitation of renewable energy from the wind over the next few years. A major factor in this expected growth is the environmental acceptance or otherwise of wind turbines and in particular their acoustic characteristics. It is generally accepted within the turbine community that reliable methods of measuring and quantifying a turbine's acoustic signature are essential if this exploitation is to be realised. This paper will seek to review current practice both in the UK and further afield and will describe the development of a practical and reliable test method, which will aid the wind turbine Manufacturer, Developer and Planner. (author)

An investigation of the levels of electromagnetic radiation generated by wind turbines

International Nuclear Information System (INIS)

Morgan, C.A.

1992-01-01

The issue of electromagnetic interference is arising with some regularity as various wind energy projects throughout the UK reach the stage where local authority planning approval is sought. To many of the parties involved, wind turbines represent an unknown quantity and hence objections to their siting must be expected. Wind turbines may cause electromagnetic interference through two quite distinct processes. The first occurs when the wind turbine scatters electromagnetic signals passing through the area of the site and essentially, provides a second path between the transmitter and receiver of the signal. The second source of interference arises when signals generated within the wind turbine itself affect communications equipment or, indeed, any electronic circuitry. A case in point is a wind farm project under development by Bonython Estates of Cornwall. The aim of this project was to investigate the emissions from the wind turbines proposed for the Bonython development. This was achieved by means of field measurements on existing installations. (author)

The design of wind turbine for electrical power generation in Malaysian wind characteristics

International Nuclear Information System (INIS)

Abas Ab Wahab; Chong Wen Thong

2000-01-01

The paper describes the study of a wind turbine for electrical power generation in Malaysia wind characteristics. In this research, the wind turbine is designs based on the local wind characteristics and tries to avoid the problems faced in the past (turbine design, access, manpower and technical). The new wind turbine rotor design for a medium speed wind speed turbine utilises the concept of open-close type of horizontal axis (up-wind) wind turbine is intended to widen the optimum performance range for electrical generation in Malaysia wind characteristics. The wind turbine has been designed to cut-in at a lower speed, and to provide the rotation speed that high enough to run a generator. The analysis and design of new low speed wind turbine blades and open-close turbine rotor and prediction of turbine performance are being detailed in this paper. (Author)

Performance assessment of a small wind turbine with crossflow runner by numerical simulations

Energy Technology Data Exchange (ETDEWEB)

Dragomirescu, A. [University Politehnica of Bucharest, Department of Hydraulics, Hydraulic Machinery and Environmental Engineering, Splaiul Independentei 313, 060042 Bucharest (Romania)

2011-03-15

Most of the classical wind turbines are not able to start at wind speeds as low as 2-3 m/s. Other turbines, like Savonius, have a low maximum efficiency, which renders them useless in poor wind conditions. Therefore, new turbine designs are required to harvest wind power even when the wind speed is low. A wind turbine having a crossflow runner, similar to the Banki water turbine, is studied numerically in this work in order to estimate its performance. The results obtained suggest that this turbine has a considerable high starting torque and its maximum power coefficient is comparable to those of horizontal axis wind turbines. Based on the results obtained, some improvements of the design are proposed in order to further increase turbine performance. (author)

Author Details

African Journals Online (AJOL)

Mohod, SW. Vol 3, No 5 (2011) - Articles Laboratory development of wind turbine simulator using variable speed induction motor. Abstract PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

18 CFR 45.2 - Positions requiring authorization.

Science.gov (United States)

2010-04-01

... mentioned which applicant holds and which are invested with executive authority, applicant shall state in... directors, or otherwise. 1 Corporation means any corporation, joint-stock company, partnership, association...

Turbine stage model

International Nuclear Information System (INIS)

Kazantsev, A.A.

2009-01-01

A model of turbine stage for calculations of NPP turbine department dynamics in real time was developed. The simulation results were compared with manufacturer calculations for NPP low-speed and fast turbines. The comparison results have shown that the model is valid for real time simulation of all modes of turbines operation. The model allows calculating turbine stage parameters with 1% accuracy. It was shown that the developed turbine stage model meets the accuracy requirements if the data of turbine blades setting angles for all turbine stages are available [ru

A wind turbine hybrid simulation framework considering aeroelastic effects

Science.gov (United States)

Song, Wei; Su, Weihua

2015-04-01

In performing an effective structural analysis for wind turbine, the simulation of turbine aerodynamic loads is of great importance. The interaction between the wake flow and the blades may impact turbine blades loading condition, energy yield and operational behavior. Direct experimental measurement of wind flow field and wind profiles around wind turbines is very helpful to support the wind turbine design. However, with the growth of the size of wind turbines for higher energy output, it is not convenient to obtain all the desired data in wind-tunnel and field tests. In this paper, firstly the modeling of dynamic responses of large-span wind turbine blades will consider nonlinear aeroelastic effects. A strain-based geometrically nonlinear beam formulation will be used for the basic structural dynamic modeling, which will be coupled with unsteady aerodynamic equations and rigid-body rotations of the rotor. Full wind turbines can be modeled by using the multi-connected beams. Then, a hybrid simulation experimental framework is proposed to potentially address this issue. The aerodynamic-dominant components, such as the turbine blades and rotor, are simulated as numerical components using the nonlinear aeroelastic model; while the turbine tower, where the collapse of failure may occur under high level of wind load, is simulated separately as the physical component. With the proposed framework, dynamic behavior of NREL's 5MW wind turbine blades will be studied and correlated with available numerical data. The current work will be the basis of the authors' further studies on flow control and hazard mitigation on wind turbine blades and towers.

Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240

Science.gov (United States)

2015-11-05

Undissolved Water in Aviation Turbine Fuels per ASTM D3240 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Joel Schmitigal... water ) in Aviation Turbine Fuels per ASTM D3240 15. SUBJECT TERMS fuel, JP-8, aviation fuel, contamination, free water , undissolved water , Aqua-Glo 16...Michigan 48397-5000 Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240 Joel Schmitigal Force

Corporate governance and audit features: SMEs evidence

OpenAIRE

Al-Najjar, Basil

2018-01-01

Purpose\\ud The purpose of this paper is to investigate the effect of corporate governance factors on audit features, namely, audit fees and the selection of Big 4 audit firms within the UK SMEs context.\\ud \\ud Design/methodology/approach\\ud The author uses different regression models to investigate the impact of corporate governance characteristics on audit features, and employs cross-sectional time series models as well as two-stage least squares technique. In addition, the author has used l...

Risks of turbine generators at WWER-440 nuclear power plants

International Nuclear Information System (INIS)

Virolainen, T.; Marttila, J.; Aulamo, H.

1998-01-01

Many serious fires and incidents have occurred in the turbine halls of nuclear power plants, resulting in serious damage and long shutdown outages. Some of these incidents have endangered the safe shutdown of the plants because of the location of lack of vital fire protection safety systems. A detailed analysis is necessary for all those plants that have equipment important for safe shutdown located in the turbine hall or its vicinity without strict fire separation by fire rated barriers. A reduction in the fire frequencies of the turbine hall is an additional way of improving safety. This is possible by improving all aspects of turbine generator operation. (author)

Hydraulic turbines

International Nuclear Information System (INIS)

Meluk O, G.

1998-01-01

The hydraulic turbines are defined according to the specific speed, in impulse turbines and in reaction turbines. Currently, the Pelton turbines (of impulse) and the Francis and Kaplan turbines (of reaction), they are the most important machines in the hydroelectric generation. The hydraulic turbines are capable of generating in short times, large powers, from its loads zero until the total load and reject the load instantly without producing damages in the operation. When the hydraulic resources are important, the hydraulic turbines are converted in the axle of the electric system. Its combination with thermoelectric generation systems, it allow the continuing supply of the variations in demand of energy system. The available hydraulic resource in Colombia is of 93085 MW, of which solely 9% is exploited, become 79% of all the electrical country generation, 21% remaining is provided by means of the thermoelectric generation

Iranian Corporations and Corporate Social Responsibility

Directory of Open Access Journals (Sweden)

Hadi Chapardar

2011-10-01

Full Text Available Comparative studies have demonstrated that the themes for corporate social responsibility (CSR initiatives are different among nations and geographic regions based on their cultural, political, legal, social, and economic contexts. In this research, which was conducted on 56 corporations from IMI100 (100 Iranian companies with highest annual sales, ranked by Industrial Management Institute or IMI, CSR themes in priority have been identified. Data collected from a semistructured questionnaire and some complementary interviews were analyzed against the results of a reference study over 100 companies from developed countries. The resulted themes, some of which may have several subthemes, were developed in three economic, environmental, and social categories. Beside these qualitative findings, two indices are constructed for indicating the “importance” of and “contribution” to each theme. The results and discussions are supposed to help business leaders, international companies inside Iran, governmental authorities, and researchers to improve CSR discussions and practices in the country where CSR undergoes a less structured platform.

Feasibility study on rehabilitation of KESC gas turbine power plant

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As to power generation facilities of Karachi Electric Power Supply Corporation in Karachi (KESC), the Islamic Republic of Pakistan, feasibility study on the rehabilitation was conducted in consideration of the CDM (clean development mechanism) project. In Pakistan, 13 gas turbine power plants started operation at the same time as the time when the power plant studied this time started operation, and therefore it is predicted that they also have the same troubles caused by the aged deterioration. As the rehabilitation project, two cases were proposed: In Case 1, gas turbine and generator are both exchanged, and in Case 2, gas turbine is only exchanged, and generator is reused after repair. The work term is approximately 9 months in both cases. The initial investment is $84 million in Case 1 and $78 million in Case 2. The energy conservation effect per cost is 107 t/y/million yen and 101 t/y/million yen, respectively. Further, the amount of greenhouse effect gas reduction per cost is 330 t-CO2/y/million yen and 313 t-CO2/y/million yen, respectively. The effect of profits can be obtained after the depreciation period since the fuel price is reduced approximately 0.5%. (NEDO)

Hubungan Corporate Governance, Corporate Social Responsibilities dan Corporate Financial Performance Dalam Satu Continuum

Directory of Open Access Journals (Sweden)

Etty Murwaningsari

2009-01-01

Full Text Available This research aims to identify the influence of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance, and also to observe the possible influence of Corporate Social Responsibility on Corporate Financial Performance. This research examines 126 manufacturing companies which are listed in Indonesian Stock Exchange (ISX and have issued an audited financial statement for 2006. The statistical method used to test the hypothesis is Path Analysis. The result suggests that Good Corporate Governance influences both the disclosure of Corporate Social Responsibility and Corporate Financial Performance and that Corporate Social Responsibility significantly influences Corporate Financial Performance. The result also suggests that CEO Tenure, the controlling variable, holds a significant influence on the disclosure of Corporate Social Responsibility. Yet, there is no strong evidence to support the type of industries as an influencing factor of Corporate Social Responsibility. Furthermore, we found that the latter condition would also apply when we analyze the influence of Corporate Secretary and Nomination and Remuneration Committee on Corporate Financial Performance. Abstract in Bahasa Indonesia: Penelitian ini bertujuan untuk mengidentifikasi pengaruh antara struktur Coorporate Governance yang diproksikan sebagai kepemilikan institusional, kepemilikan manajerial terhadap corporate social responsibility dan corporate social responsibility terhadap corporate financial performance. Penelitian menggunakan data sekunder dari laporan tahunan 2006 perusahaan publik yang terdapat di Pusat Referensi Pasar Modal (PRPM Bursa Efek Indonesia (BEI. Sampel dalam penelitian ini sebanyak 126 perusahaan. Melalui pendekatan analisa jalur (path analysis menunjukkan Good Corporate Governance yaitu kepemilikan managerial dan institusional mempunyai pengaruh terhadap

Corporate Law and Corporate Governance

OpenAIRE

Roberta Romano

1998-01-01

We have seen a revival in interest in corporate law and corporate governance since the 1980s, as researchers applied the tools of the new institutional economics and modern corporate finance to analyze the new transactions emerging in the 1980s takeover wave. This article focuses on three mechanisms of corporate governance to illustrate the analytical usefulness of transaction cost economics for corporate law. They are the board of directors; relational investing, a form of block ownership in...

Secondary middle turbinate: case report

Energy Technology Data Exchange (ETDEWEB)

Aburjeli, Bruna de Oliveira Melim; Avila, Ana Flavia Assis de; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval, E-mail: bruninha86@hotmail.com [Radiology and Imaging Diagnosis, Hospital Mater Dei, Belo Horizonte, MG (Brazil)

2012-11-15

Secondary middle turbinate is an anatomical variant rarely observed in the nasal cavity, firstly described by Khanobthamchai et al. as a bone structure originating from the lateral nasal wall and covered by soft tissue. In most cases reported in the literature, this variant is bilateral, occurring without associated complications. In the present report, the authors describe the case of patient of their institution with such anatomical variation. (author)

Secondary middle turbinate: case report

International Nuclear Information System (INIS)

Aburjeli, Bruna de Oliveira Melim; Avila, Ana Flavia Assis de; Diniz, Renata Lopes Furletti Caldeira; Motta, Emilia Guerra Pinto Coelho; Ribeiro, Marcelo Almeida; Moreira, Wanderval

2012-01-01

Secondary middle turbinate is an anatomical variant rarely observed in the nasal cavity, firstly described by Khanobthamchai et al. as a bone structure originating from the lateral nasal wall and covered by soft tissue. In most cases reported in the literature, this variant is bilateral, occurring without associated complications. In the present report, the authors describe the case of patient of their institution with such anatomical variation. (author)

Privatization and Corporate Governance in Poland: Problems and Trends

OpenAIRE

Piotr Kozarzewski

2006-01-01

The paper is devoted to the problems of the impact of privatization on corporate governance formation in Poland. It discusses the dilemmas of choosing a model for privatization and corporate governance, legal background, mechanisms of corporate governance formation depending on a privatization method applied, and the evolution of these structures in the course of systemic transformation in Poland. The Author comes to the conclusion that the processes of privatization and corporate governance ...

Failure analysis of turbine blades

International Nuclear Information System (INIS)

Iorio, A.F.; Crespi, J.C.

1989-01-01

Two 20 MW gas turbines suffered damage in blades belonging to the 2nd. stage of the turbine after 24,000 hours of duty. From research it arises that the fuel used is not quite adequate to guarantee the blade's operating life due to the excess of SO 3 , C and Na existing in combustion gases which cause pitting to the former. Later, the corrosion phenomenon is presented under tension produced by working stress enhanced by pitting where Pb is its main agent. A change of fuel is recommended thus considering the blades will reach the operational life they were designed for. (Author) [es

Heat Transfer in Gas Turbines

Science.gov (United States)

Garg, Vijay K.

2001-01-01

The turbine gas path is a very complex flow field. This is due to a variety of flow and heat transfer phenomena encountered in turbine passages. This manuscript provides an overview of the current work in this field at the NASA Glenn Research Center. Also, based on the author's preference, more emphasis is on the computational work. There is much more experimental work in progress at GRC than that reported here. While much has been achieved, more needs to be done in terms of validating the predictions against experimental data. More experimental data, especially on film cooled and rough turbine blades, are required for code validation. Also, the combined film cooling and internal cooling flow computation for a real blade is yet to be performed. While most computational work to date has assumed steady state conditions, the flow is clearly unsteady due to the presence of wakes. All this points to a long road ahead. However, we are well on course.

Structural integrity analysis of a steam turbine

International Nuclear Information System (INIS)

Villagarcia, Maria P.

1997-01-01

One of the most critical components of a power utility is the rotor of the steam turbine. Catastrophic failures of the last decades have promoted the development of life assessment procedures for rotors. The present study requires the knowledge of operating conditions, component geometry, the properties of materials, history of the component, size, location and nature of the existing flaws. The aim of the present work is the obtention of a structural integrity analysis procedure for a steam turbine rotor, taking into account the above-mentioned parameters. In this procedure, a stress thermal analysis by finite elements is performed initially, in order to obtain the temperature and stress distribution for a subsequent analysis by fracture mechanics. The risk of a fast fracture due to flaws in the central zone of the rotor is analyzed. The procedure is applied to an operating turbine: the main steam turbine of the Atucha I nuclear power utility. (author)

Controller for a small induction-generator based wind-turbine

Energy Technology Data Exchange (ETDEWEB)

Ahshan, R.; Iqbal, M.T.; Mann, George K.I. [Faculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John' s, Newfoundland (Canada)

2008-04-15

Design of a low-cost micro-controller for a small induction-generator based grid-connected wind-turbine is presented in this paper. The controller senses the parameters of the wind-turbine generator and the grid, and makes decisions about grid connection and disconnection. Low-cost instrumentation circuitry has been developed to measure the generator and grid parameters. Based on the measurement of voltage and frequency of the wind-turbine generator and the grid side, a control decision is taken to connect the system to the grid. The controller makes decision to disconnect the system from the grid based on the power flow measurement between the wind turbine and the grid. The power flow between wind turbine and the grid depends upon the availability of the wind. The prototype controller has been developed based on a micro-controller PIC16F877 and has been tested in the laboratory. (author)

Simulation model of an active-stall fixed-speed wind turbine controller

Energy Technology Data Exchange (ETDEWEB)

Jauch, C.; Hansen, A.D.; Sorensen, P.; Blaabjerg, F.

2004-07-01

This paper describes an active-stall wind turbine controller. The objective is to develop a general model of an active stall controller in order to simulate the operation of grid connected active stall wind turbines. The active stall turbine concept and its control strategies are presented and evaluated by simulations. The presented controller is described for continuous operation under all wind speeds from start-up wind speed to shut down wind speed. Due to its parametric implementation it is general i. e. it can represent different active stall wind turbine controllers and can be implemented in different simulation tools. (author)

NEXT GENERATION TURBINE PROGRAM

Energy Technology Data Exchange (ETDEWEB)

William H. Day

2002-05-03

The Next Generation Turbine (NGT) Program's technological development focused on a study of the feasibility of turbine systems greater than 30 MW that offer improvement over the 1999 state-of-the-art systems. This program targeted goals of 50 percent turndown ratios, 15 percent reduction in generation cost/kW hour, improved service life, reduced emissions, 400 starts/year with 10 minutes to full load, and multiple fuel usage. Improvement in reliability, availability, and maintainability (RAM), while reducing operations, maintenance, and capital costs by 15 percent, was pursued. This program builds on the extensive low emissions stationary gas turbine work being carried out by Pratt & Whitney (P&W) for P&W Power Systems (PWPS), which is a company under the auspices of the United Technologies Corporation (UTC). This study was part of the overall Department of Energy (DOE) NGT Program that extends out to the year 2008. A follow-on plan for further full-scale component hardware testing is conceptualized for years 2002 through 2008 to insure a smooth and efficient transition to the marketplace for advanced turbine design and cycle technology. This program teamed the National Energy Technology Laboratory (NETL), P&W, United Technologies Research Center (UTRC), kraftWork Systems Inc., a subcontractor on-site at UTRC, and Multiphase Power and Processing Technologies (MPPT), an off-site subcontractor. Under the auspices of the NGT Program, a series of analyses were performed to identify the NGT engine system's ability to serve multiple uses. The majority were in conjunction with a coal-fired plant, or used coal as the system fuel. Identified also was the ability of the NGT system to serve as the basis of an advanced performance cycle: the humid air turbine (HAT) cycle. The HAT cycle is also used with coal gasification in an integrated cycle HAT (IGHAT). The NGT systems identified were: (1) Feedwater heating retrofit to an existing coal-fired steam plant, which

Managing Corporate Reputation Through Corporate Branding

DEFF Research Database (Denmark)

Schultz, Majken; Hatch, Mary Jo; Adams, Nick

2012-01-01

This article, which concentrates on symbolic management by explaining the role of corporate branding in managing corporate reputation, using Novo Nordisk as a case study, presents three perspectives on corporate branding: the marketing perspective, the organisational perspective and the co...... is a way to influence corporate reputation. The Novo Nordisk management believes the data indicate that corporate branding influenced reputation more than the other way around. Formal brand management practices may work considerably better when they complement rather than try to control existing forces......-creation perspective. The three perspectives reviewed show the possibility of developing a multidisciplinary conceptualisation of corporate branding. They all offer insights important to managing organisations as corporate brands in a multi-stakeholder context and thus to the likelihood that corporate branding...

Turbine main engines

CERN Document Server

Main, John B; Herbert, C W; Bennett, A J S

1965-01-01

Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing ste

Review of contemporary wind turbine concepts and their market

International Nuclear Information System (INIS)

Hansen, Anca D.; Iov, Florin; Blaabjerg, Frede; Hansen, Lars H.

2004-01-01

The main aim of this paper is to investigate the market penetration and share of different wind turbine concepts during the years 1998-2002, a period when the increase in the wind power capacity is starting to mark an abrupt evolution (more than two GW per year). A detailed overview is performed based on suppliers market data and concept evaluation for each individual wind turbine type sold by the Top Ten suppliers over the selected five years. The investigation is processing information on a total number of approximately 90 wind turbine types from 13 different manufacturers, which have been on the Top Ten list of wind turbine suppliers during 1998 to 2002. The analysis is based on very comprehensive data, which cover approximately 76% of the accumulated world wind power installed at the end of 2002. The paper also provides an overall perspective on the contemporary wind turbine concepts, classified with respect to both their speed control ability and to their power control type. Trends for wind turbine concepts are discussed. (Author)

Research in corporate communication: An overview of an emerging field

OpenAIRE

Riel, Cees

1997-01-01

textabstractThis commentary is intended as an amendment to Argenti's (1996) viewpoint, published in Volume 10, Issue 1, of Management Communication Quarterly. Van Riel provides an overview of research in corporate communication, focusing on achievements found in the international academic literature in both communication and business school disciplines. In the author's opinion, there are three key concepts in corporate communication research: corporate identity, corporate reputation, and orch...

Employment of the Disabled in Large Corporations.

Science.gov (United States)

Rabby, Rami

1983-01-01

Large corporations are in a unique position to employ the disabled, but they sometimes lack the motivation to do so. The author discusses elements of a corporate policy for the disabled, ways of formulating and disseminating it, assignment of responsibility, changes in management attitudes, and the special case of the multinational company.…

Turbinate surgery

Science.gov (United States)

Turbinectomy; Turbinoplasty; Turbinate reduction; Nasal airway surgery; Nasal obstruction - turbinate surgery ... There are several types of turbinate surgery: Turbinectomy: All or ... This can be done in several different ways, but sometimes a ...

Wind turbine concept market penetration over 10 years (1995-2004)

International Nuclear Information System (INIS)

Hansen, Anca D.; Hansen, Lars H.

2006-01-01

The aim of this article is to investigate the market penetration and share of different wind turbine concepts during the years 1995-2004, a period that represents the maturational era of the modern wind power industry. A detailed overview is given based on suppliers' market data and concept evaluation for each individual wind turbine type sold by the Top Ten suppliers over the selected decade. The investigation is processing information on approximately 160 wind turbine types from 22 different manufacturers that have featured in the Top Ten list of wind turbine suppliers during 1995-2004. The analysis is based on comprehensive data covering approximately 97% of the cumulative wind power installed worldwide at the end of 2004. The article also provides an overall perspective on contemporary wind turbine concepts, classified with respect to both their speed control ability and power control type. Current and future trends for wind turbine concepts are discussed. (Author)

Turbine repair process, repaired coating, and repaired turbine component

Science.gov (United States)

Das, Rupak; Delvaux, John McConnell; Garcia-Crespo, Andres Jose

2015-11-03

A turbine repair process, a repaired coating, and a repaired turbine component are disclosed. The turbine repair process includes providing a turbine component having a higher-pressure region and a lower-pressure region, introducing particles into the higher-pressure region, and at least partially repairing an opening between the higher-pressure region and the lower-pressure region with at least one of the particles to form a repaired turbine component. The repaired coating includes a silicon material, a ceramic matrix composite material, and a repaired region having the silicon material deposited on and surrounded by the ceramic matrix composite material. The repaired turbine component a ceramic matrix composite layer and a repaired region having silicon material deposited on and surrounded by the ceramic matrix composite material.

Simulation model of a transient fault controller for an active-stall wind turbine

Energy Technology Data Exchange (ETDEWEB)

Jauch, C.; Soerensen, P.; Bak Jensen, B.

2005-01-01

This paper describes the simulation model of a controller that enables an active-stall wind turbine to ride through transient faults. The simulated wind turbine is connected to a simple model of a power system. Certain fault scenarios are specified and the turbine shall be able to sustain operation in case of such faults. The design of the controller is described and its performance assessed by simulations. The control strategies are explained and the behaviour of the turbine discussed. (author)

CORPORATE GOVERNANCE IN INDIA: AN ANALYSIS

Directory of Open Access Journals (Sweden)

Meghna Thapar

2017-03-01

Full Text Available Corporate governance is a process, relation and mechanism set up for the corporations and firms based on certain guidelines and principles by which a company is controlled and directed. The principles provided in the system ensure that the company is governed in a way that it is able to set and achieve its goals and objectives in the context of the social, regulatory and market environment, and is able to maximize profits and also benefit those whose interest is involved in it, in the long run. The division and distribution of rights and responsibilities among different participants in the corporation (such as the board of directors, managers, shareholders, creditors, auditors, regulators, and other stakeholders and inclusion of the rules and procedures for making decisions in corporate affairs are identified with the help of Corporate Governance mechanism and guidelines. The need to make corporate governance in India transparent was felt after the high profile corporate governance failure scams like the stock market scam, the UTI scam, Ketan Parikh scam, Satyam scam, which were severely criticized by the shareholders. Thus, Corporate Governance is not just company administration but more than that and includes monitoring the actions, policies, practices, and decisions of corporations, their agents, and affected stakeholders thereby ensuring fair, efficient and transparent functioning of the corporate management system. By this paper, the authors intend to examine the concept of corporate governance in India with regard to the provisions of corporate governance under the Companies Act 2013. The paper will highlight the importance and need of corporate governance in India. We will also discuss the important case laws which contributed immensely in the emergence of corporate governance in India.

Coordinated Control of Wind Turbine and Energy Storage System for Reducing Wind Power Fluctuation

Energy Technology Data Exchange (ETDEWEB)

Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kim, Chunghun [Hanyang University; Chung, Chung Choo [Hanyang University

2017-11-13

This paper proposes a coordinated control of wind turbine and energy storage system (ESS). Because wind power (WP) is highly dependent on variable wind speed and could induce a severe stability problem to power system especially when the WP has high penetration level. To solve this problem, many power generation corporations or grid operators recently use the ESS. It has very quick response and good performance for reducing the impact of WP fluctuation but has high cost for its installation. Therefore, it is very important to design the control algorithm considering both ESS capacity and grid reliability. Thus, we propose the control algorithm to mitigate the WP fluctuation by using the coordinated control between wind turbine and ESS considering ESS state of charge (SoC) and the WP fluctuation. From deloaded control according to WP fluctuation and ESS SoC management, we can expect the ESS lifespan expansion and improved grid reliability. The effectiveness of the proposed method is validated in MATLAB/Simulink considering power system including both wind turbine generator and conventional generators which react to system frequency deviation.

Costs of the grid connection of wind turbines

Energy Technology Data Exchange (ETDEWEB)

Siden, G [Halmstad Univ. (Sweden)

1996-12-31

The costs of the grid connection of wind turbines in Sweden have until now been about 5 % of the total investments, provided that the distance of the connection cable is limited. Now the grid will soon be filled locally and it will be necessary to strengthen it. The costs for this can also be about 5 %, and the total cost about 10 %. Improvements in the electrical systems of the wind turbines and the connection technique can give less disturbance in the grid and diminish the costs. It is important to agree on how to share the costs for strengthening the grid. Otherwise, it can become an obstacle when building new wind turbines. (author)

Costs of the grid connection of wind turbines

International Nuclear Information System (INIS)

Siden, G.

1995-01-01

The costs of the grid connection of wind turbines in Sweden have until now been about 5 % of the total investments, provided that the distance of the connection cable is limited. Now the grid will soon be filled locally and it will be necessary to strengthen it. The costs for this can also be about 5 %, and the total cost about 10 %. Improvements in the electrical systems of the wind turbines and the connection technique can give less disturbance in the grid and diminish the costs. It is important to agree on how to share the costs for strengthening the grid. Otherwise, it can become an obstacle when building new wind turbines. (author)

Costs of the grid connection of wind turbines

Energy Technology Data Exchange (ETDEWEB)

Siden, G. [Halmstad Univ. (Sweden)

1995-12-31

The costs of the grid connection of wind turbines in Sweden have until now been about 5 % of the total investments, provided that the distance of the connection cable is limited. Now the grid will soon be filled locally and it will be necessary to strengthen it. The costs for this can also be about 5 %, and the total cost about 10 %. Improvements in the electrical systems of the wind turbines and the connection technique can give less disturbance in the grid and diminish the costs. It is important to agree on how to share the costs for strengthening the grid. Otherwise, it can become an obstacle when building new wind turbines. (author)

Natural gas turbine topping for the iris reactor

International Nuclear Information System (INIS)

Oriani, L.; Lombardi, C.; Paramonov, D.

2001-01-01

Nuclear power plant designs are typically characterized by high capital and low fuel costs, while the opposite is true for fossil power generation including the natural gas-fired gas turbine combined cycle currently favored by many utilities worldwide. This paper examines potential advantages of combining nuclear and fossil (natural gas) generation options in a single plant. Technical and economic feasibility and attractiveness of a gas turbine - nuclear reactor combined cycle where gas turbine exhaust is used to superheat saturated steam produced by a low power light water reactor are examined. It is shown that in a certain range of fuel and capital costs of nuclear and fossil options, the proposed cycle offers an immediate economic advantage over stand-alone plants resulting from higher efficiency of the nuclear plant. Additionally, the gas turbine topping will result in higher fuel flexibility without the economic penalty typically associated with nuclear power. (author)

Natural gas turbine topping for the iris reactor

Energy Technology Data Exchange (ETDEWEB)

Oriani, L.; Lombardi, C. [Politecnico di Milano, Milan (Italy); Paramonov, D. [Westinghouse Electric Corp., LLC, Pittsburgh, PA (United States)

2001-07-01

Nuclear power plant designs are typically characterized by high capital and low fuel costs, while the opposite is true for fossil power generation including the natural gas-fired gas turbine combined cycle currently favored by many utilities worldwide. This paper examines potential advantages of combining nuclear and fossil (natural gas) generation options in a single plant. Technical and economic feasibility and attractiveness of a gas turbine - nuclear reactor combined cycle where gas turbine exhaust is used to superheat saturated steam produced by a low power light water reactor are examined. It is shown that in a certain range of fuel and capital costs of nuclear and fossil options, the proposed cycle offers an immediate economic advantage over stand-alone plants resulting from higher efficiency of the nuclear plant. Additionally, the gas turbine topping will result in higher fuel flexibility without the economic penalty typically associated with nuclear power. (author)

Full-load converter connected asynchronous generators for MW class wind turbines

Energy Technology Data Exchange (ETDEWEB)

Akhmatov, Vladislav

2005-06-15

Wind turbines equipped with full-load converter-connected asynchronous generators are a known concept. These have rating up to hundreds of kW and are a feasible concept for MW class wind turbines and may have advantages when compared to conventional wind turbines with directly connected generators. The concept requires the use of full-scale frequency converters, but the mechanical gearbox is smaller than in conventional wind turbines of the same rating. Application of smaller gearbox may reduce the no-load losses in the wind turbines, which is why such wind turbines with converter connected generators may start operation at a smaller wind speed. Wind turbines equipped with such converted connected asynchronous generators are pitch-controlled and variable-speed. This allows better performance and control. The converter control may be applied to support the grid voltage at short-circuit faults and to improve the fault-ride-through capability of the wind turbines, which makes the concepts relevant for large wind farms. The Danish transmission system operator Energinet-DK has implemented the general model of wind turbines equipped with converter connected asynchronous generators with the simulation tool Powerfactory (DlgSilent). The article presents Energinet-DK's experience of modeling this feasible wind turbine concept. (Author)

How Do Employees Perceive Corporate Responsibility? Development and Validation of a Multidimensional Corporate Stakeholder Responsibility Scale

OpenAIRE

El Akremi, A.; Gond, J-P.; Swaen, V.; De Roeck, K.; Igalens, J.

2015-01-01

Recent research on the microfoundations of corporate social responsibility (CSR) has highlighted the need for improved measures to evaluate how stakeholders perceive and subsequently react to CSR initiatives. Drawing on stakeholder theory and data from five samples of employees (N = 3,772), the authors develop and validate a new measure of corporate stakeholder responsibility (CStR), which refers to an organization’s context-specific actions and policies designed to enhance the welfare of var...

Damage detection in wind turbine blades using acoustic techniques

Energy Technology Data Exchange (ETDEWEB)

Juengert, A., E-mail: anne.juengert@mpa.uni-stuttgart.de [Univ. of Stuttgart, Materialpruefungsanstalt Stuttgart, Stuttgart (Germany)

2013-05-15

Facing climate change, the use of renewable energy gains importance. The wind energy sector grows very fast. Bigger and more powerful wind turbines will be built in the coming decades and the safety and reliability of the turbines will become more important. Wind turbine blades have to be inspected at regular intervals, because they are highly stressed during operation and a blade breakdown can cause big economic damages. The turbine blades consist of fiber reinforced plastics (GFRP/CFRP) and sandwich areas containing wood or plastic foam. The blades are manufactured as two halves and glued together afterwards. Typical damages are delaminations within the GFRP or the sandwich and missing adhesive or deficient bond at the bonding surfaces. The regular inspections of wind turbine blades are performed manually by experts and are limited to visual appraisals and simple tapping tests. To improve the inspections of wind turbine blades non-destructive testing techniques using acoustic waves are being developed. To detect delaminations within the laminates of the turbine blade, a local resonance spectroscopy was used. To detect missing bond areas from the outside of the blade the impulse-echo-technique was applied. This paper is an updated reprint of an article published on ndt.net in 2008. (author)

Damage detection in wind turbine blades using acoustic techniques

International Nuclear Information System (INIS)

Juengert, A.

2013-01-01

Facing climate change, the use of renewable energy gains importance. The wind energy sector grows very fast. Bigger and more powerful wind turbines will be built in the coming decades and the safety and reliability of the turbines will become more important. Wind turbine blades have to be inspected at regular intervals, because they are highly stressed during operation and a blade breakdown can cause big economic damages. The turbine blades consist of fiber reinforced plastics (GFRP/CFRP) and sandwich areas containing wood or plastic foam. The blades are manufactured as two halves and glued together afterwards. Typical damages are delaminations within the GFRP or the sandwich and missing adhesive or deficient bond at the bonding surfaces. The regular inspections of wind turbine blades are performed manually by experts and are limited to visual appraisals and simple tapping tests. To improve the inspections of wind turbine blades non-destructive testing techniques using acoustic waves are being developed. To detect delaminations within the laminates of the turbine blade, a local resonance spectroscopy was used. To detect missing bond areas from the outside of the blade the impulse-echo-technique was applied. This paper is an updated reprint of an article published on ndt.net in 2008. (author)

Characteristics of pumps when used as turbines; Projet 'Caracteristiques des pompes fonctionnant en turbines'

Energy Technology Data Exchange (ETDEWEB)

Arpe, J.; Prenat, J. [Ecole d' ingenieurs de Geneve, Geneve (Switzerland); Dubas, M.; Biner, H.-P. [Haute Ecole valaisanne, Sion (Switzerland)

2006-07-01

This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the state of the art concerning the use of pumps as turbines to drive the generators of small hydro-electric schemes. The method proposed is based on the determination of a model which computes the total head losses in pump operation with the help of pump geometry. Then, this model is applied to determine the characteristics to be expected in turbine operation. For this project, five pump geometries were used in order to verify the model. As a result, the modelling of losses allows a prediction of the head at the best efficiency point (BEP) in pump operation with an error of between 4 and 5%. The authors state that software programmed in Excel has been developed and will be available for free use. Also, a laboratory test rig is described. The mathematical modelling of the pump/turbine is presented in detail.

Corporate Investments in Education during an Economic Downturn

Science.gov (United States)

McCarthy, Kirstin; Contardo, Jeanne; Eckert, Leila Morsy

2010-01-01

Corporate philanthropies can provide much-needed support to K-12 and postsecondary education efforts. This article analyzes whether select multi-billion dollar corporate philanthropies continue such support and adhere to best-funding practices during an economic downtown. Drawing on interview and document review data, the authors examine the…

Damage tolerance and structural monitoring for wind turbine blades.

Science.gov (United States)

McGugan, M; Pereira, G; Sørensen, B F; Toftegaard, H; Branner, K

2015-02-28

The paper proposes a methodology for reliable design and maintenance of wind turbine rotor blades using a condition monitoring approach and a damage tolerance index coupling the material and structure. By improving the understanding of material properties that control damage propagation it will be possible to combine damage tolerant structural design, monitoring systems, inspection techniques and modelling to manage the life cycle of the structures. This will allow an efficient operation of the wind turbine in terms of load alleviation, limited maintenance and repair leading to a more effective exploitation of offshore wind. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Turbine Energy Evaluation by internal dimensional control

International Nuclear Information System (INIS)

Mediavilla, F.

2000-01-01

To maintain the optimum thermal performance in a high level throughout the life of the turbines requires a good testing program, proper analysis of the test data, and a steam path audit during turbine overhauls. If from operating data analysis collected during the performance test before the outage shows that the efficiency of the turbine is coming down, the steam path audit, that is an internal inspection and a dimensional control of the internals, identity and quantity causes of performance degradation like, seal leakages, excessive clearances, solid particle erosion damages, blades deposits and other losses. The steam path audit assigns the heat rate penalties associated with each of these individual losses to the total degradation. This are used to make cost-effective maintenance decisions during the course of the overhaul. After repairs, a closing steam path audit is conducted during the re assembly of the turbine in order to predict return to service condition of the machine and to provide a quality control check on outage repairs. (Author)

Assessment and prediction of wind turbine noise

International Nuclear Information System (INIS)

Lowson, M.V.

1993-01-01

The significance of basic aerodynamic noise sources for wind turbine noise are assessed, using information on the aero-acoustic mechanisms of other rotors, which have been studied in depth for many years. From the analysis, areas of potential improvement in wind turbine noise prediction are defined. Suggestions are made for approaches to wind turbine noise control which separate the noise problems at cut-in from those at rated power. Some of these offer the possibility of noise reduction without unfavourable effects on performance. Based on this analysis, a new model for prediction of wind turbine noise is presented and comparisons made between prediction and experiment. The model is based on well established aeroacoustic theory and published laboratory data for the two principal sources, inflow turbulence and boundary layer trailing edge interaction. The new method gives good agreement with experiment with the case studied so far. Parametric trends and sensitivities for the model are presented. Comparisons with previous prediction methods are also given. A consequence of the new model is to put more emphasis on boundary layer trailing edge interaction as a noise source. There are prospects for reducing noise from this source detail changes to the wind turbine design. (author)

CSA guide to Canadian wind turbine codes and standards

International Nuclear Information System (INIS)

2008-01-01

The Canadian wind energy sector has become one of the fastest-growing wind energy markets in the world. Growth of the industry has been supported by various government agencies. However, many projects have experienced cost over-runs or cancellations as a result of unclear regulatory requirements, and wind energy developers are currently subject to a variety of approval processes involving several different authorities. This Canadian Standards Association (CSA) guide provided general information on codes and standards related to the design, approval, installation, operation, and maintenance of wind turbines in Canada. CSA codes and standards were developed by considering 5 new standards adopted by the International Electrotechnical Commission (IEC) Technical Committee on Wind Turbines. The standards described in this document related to acoustic noise measurement techniques; power performance measurements of electricity-producing wind turbines; lightning protection for wind turbine generator systems; design requirements for turbines; and design requirements for small wind turbines. The guide addressed specific subject areas related to the development of wind energy projects that involve formal or regulatory approval processes. Subject areas included issues related to safety, environmental design considerations, site selection, and mechanical systems. Information on associated standards and codes was also included

Steam turbine cycle

International Nuclear Information System (INIS)

Okuzumi, Naoaki.

1994-01-01

In a steam turbine cycle, steams exhausted from the turbine are extracted, and they are connected to a steam sucking pipe of a steam injector, and a discharge pipe of the steam injector is connected to an inlet of a water turbine. High pressure discharge water is obtained from low pressure steams by utilizing a pressurizing performance of the steam injector and the water turbine is rotated by the high pressure water to generate electric power. This recover and reutilize discharged heat of the steam turbine effectively, thereby enabling to improve heat efficiency of the steam turbine cycle. (T.M.)

Measurement of starting characteristics of a remote area Darrieus wind turbine

Energy Technology Data Exchange (ETDEWEB)

Freere, P. [Monash University, Clayton (Australia). Dept. of Electrical Engineering; Moller, C.; Jespersen, R. [Danish Technical University, Copenhagen (Denmark). Dept. of Electrical Engineering

1999-07-01

A 17 kW Darrieus was constructed as a remote area power supply for an independent community outside Melbourne, Australia. After languishing for several years it was reconditioned, but found not to start at wind speeds up to 12 m/s. Therefore, the turbine was modelled by driving it with an electric motor at various rotational speeds over a range of wind speeds. Thus it was possible to measure the turbine starting characteristics, thereby indicating reasons for the turbine's lack of performance. (author)

Coughing Up Executives or Rolling the Dice?: Individual Accountability for Corporate Corruption

NARCIS (Netherlands)

S. Oded (Sharon)

2017-01-01

textabstract“Flesh-and-blood” corporate criminals have long been a major focus of U.S. enforcement authorities in the battle against foreign bribery. Many of the actions taken against individuals were largely enabled due to the cooperation of culpable corporations with investigative authorities. For

Steam turbine generators for Sizewell 'B' nuclear power station

International Nuclear Information System (INIS)

Hesketh, J.A.; Muscroft, J.

1990-01-01

The thermodynamic cycle of the modern 3000 r/min steam turbine as applied at Sizewell 'B' is presented. Review is made of the factors affecting thermal efficiency including the special nature of the wet steam cycle and the use of moisture separation and steam reheating. Consideration is given to the optimization of the machine and cycle parameters, including particular attention to reheating and to the provision of feedheating, in order to achieve a high overall level of performance. A modular design approach has made available a family of machines suitable for the output range 600-1300 MW. The constructional features of the 630 MW Sizewell 'B' turbine generators from this range are described in detail. The importance of service experience with wet steam turbines and its influence on the design of modern turbines for pressurized water reactor (PWR) applications is discussed. (author)

Corporate against corporate management

OpenAIRE

Runcev, Nikolce; Krstev, Boris; Golomeova, Mirjana

2010-01-01

In contemporary economic performance, corporate governance is considered an essential prerequisite in building a successful system for creating an attractive investment climate, which is characterized by competing companies oriented and efficient financial markets. Good corporate governance is based on principles of transparency, bias, efficiency, timeliness, completeness and accuracy of information at all levels of management. Companies with good corporate governance and afford easier acc...

Measuring instruments of corporate reputation

Directory of Open Access Journals (Sweden)

Damir Grgić

2008-12-01

Full Text Available The subject of this paper is focused on the instruments for the measurement of corporate reputation. Recent research of the elements which influence the success of a company shows a growing interest in intangible values. Corporate reputation itself has been identified as one of the key intangible assets which create the company’s added value. Understanding of the importance of corporate reputation has been determined as a significant component of the company’s competitiveness, that is, of its competitive edge. Reputation is a normal part of our life and an integral part of our society. Our interest in the honesty and integrity of others is firmly established in all cultures and nowadays the focus of this interest is switching increasingly on companies. Corporate reputation can be acquired by means of strong, well-developed strategies, which are crucial for the opinion of stakeholders regarding future stability and competitive sustainability of the company. On the other hand, it should be emphasized that in order to manage it, corporate reputation has to be measured first. However, although the concept of corporate reputation is universally accepted and its significance has been recognized especially in the last two decades, the process of its measurement is still at an early stage and there is no universally accepted instrument for its measurement. Therefore, the author of this paper gives an overview of the instruments used for the measurement of corporate reputation which have gained a foothold through former practical usage.

A novel steady state wind turbine simulator using an inverter controlled induction motor

Energy Technology Data Exchange (ETDEWEB)

Kojabadi, H.M.; Liuchen Chang

2005-07-01

This paper presents a new wind turbine simulator for steady state conditions. In order to provide a test platform for wind turbine drive trains, the authors have developed an experimental system to simulate the static characteristics of real wind turbines. This system consists of a 10 hp induction motor (IM), which drives a synchronous generator and is driven by a 10 kW variable-speed drive inverter, and real time control software. A microcontroller, a PC interfaced to a LAB Windows I/O board, and an IGBT inverter-controlled induction motor are used instead of a real wind turbine to supply shaft torque. A control program written in the C language is developed that obtains wind profiles and, by using turbine characteristics and the rotational speed of the IM, calculates the theoretical shaft torque of a real wind turbine. Based on the comparison of the measured torque with this demand torque, the shaft torque of the IM is regulated accordingly by controlling stator current demand and frequency demand of an inverter. In this way, the relationships between shaft rotating speed, shaft torque of the IM and wind speed are made to conform to the characteristics of a real wind turbine. The drive is controlled using the measured shaft torque directly, instead of estimating it as conventional drives do. (author)

Control of variable speed wind turbines with doubly-fed induction generators

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.D.; Soerensen, P.; Iov, F.; Blaabjerg, F.

2005-07-01

The paper presents an overall control method for variable speed pitch controlled wind turbines with doubly-fed induction generators (DFIG). Emphasis is on control strategies and algorithms applied at each hierarchical control level of the wind turbine. The objectives of the control system are: 1) to control the power drawn from the wind turbine in order to track the wind turbine maximum power operation point, 2) to limit the power in case of large wind speeds, and 3) to control the reactive power interchanged between the wind turbine generator and the grid. The present control method is designed for normal continuous operations. The strongest feature of the implemented control method is that it allows the turbine to operate with the optimum power efficiency over a wide range of wind speeds. The model of the variable speed, variable pitch wind turbine with doubly-fed induction generator is implemented in the dynamic power system simulation tool DlgSILENT PowerFactory which allows investigation of the dynamic performance of grid-connected wind turbines within realistic electrical grid models. Simulation results are presented and analysed in different normal operating conditions. (author)

Design of a wind turbine pitch angle controller for power system stabilisation

Energy Technology Data Exchange (ETDEWEB)

Jauch, Clemens; Soerensen, Poul [Risoe National Laboratory, Wind Energy Department, P.O. Box 49, DK-4000 Roskilde (Denmark); Islam, Syed M. [Department of Electrical and Computer Engineering, Curtin University of Technology, GPO Box U1987, Perth, WA 6845 (Australia); Bak Jensen, Birgitte [Institute of Energy Technology, Aalborg University, Pontoppidanstraede 101, DK-9220 Aalborg East (Denmark)

2007-11-15

The design of a PID pitch angle controller for a fixed speed active-stall wind turbine, using the root locus method is described in this paper. The purpose of this controller is to enable an active-stall wind turbine to perform power system stabilisation. For the purpose of controller design, the transfer function of the wind turbine is derived from the wind turbine's step response. The performance of this controller is tested by simulation, where the wind turbine model with its pitch angle controller is connected to a power system model. The power system model employed here is a realistic model of the North European power system. A short circuit fault on a busbar close to the wind turbine generator is simulated, and the dynamic responses of the system with and without the power system stabilisation of the wind turbines are presented. Simulations show that in most operating points the pitch controller can effectively contribute to power system stabilisation. (author)

Review of contemporary wind turbine concepts and their market penetration

International Nuclear Information System (INIS)

Hansen, A.D.; Iov, F.; Blaabjerg, F.; Hansen, L.H.

2004-01-01

The main aim of this paper is to investigate the market penetration and share of different wind turbine concepts during the years 1998-2002, a period when the increase in the wind power capacity is starting to mark an abrupt evolution (more than two GW per year). A detailed overview is performed based on suppliers market data and concept evaluation for each individual wind turbine type sold by the Top Ten suppliers over the selected five years. The investigation is processing information on a total number of approximately 90 wind turbine types from 13 different manufacturers, which have been on the Top Ten list of wind turbine suppliers during 1998 to 2002. The analysis is based on very comprehensive data, which cover approximately 76% of the accumulated world wind power installed at the end of 2002. The paper also provides an overall perspective on the contemporary wind turbine concepts, classified with respect to both their speed control ability and to their power control type. Trends for wind turbine concepts are discussed. (author)

Electrical components library for HAWC2; Wind turbines

Energy Technology Data Exchange (ETDEWEB)

Cutululis, N.A.; Larsen, Torben J.; Soerensen, Poul; Hansen, Anca D. (Risoe National Lab., DTU, Wind Energy Dept., Roskilde (DK)); Iov, F. (Aalborg Univ., Institute of Energy Technology (DK))

2007-12-15

The work presented in this report is part of the EFP project called ''A Simulation Platform to Model, Optimize and Design Wind Turbines'' partly funded by the Danish Energy Authority under contract number 1363/04-0008. The project is carried out in cooperation between Risoe National Laboratory and Aalborg University. In this project, the focus is on the development of a simulation platform for wind turbine systems using different simulation tools. This report presents the electric component library developed for use in the aeroelastic code HAWC2. The developed library includes both steady state and dynamical models for fixed and variable speed wind turbines. A simple steady-state slip model was developed for the fixed speed wind turbine. This model is suitable for aeroelastic design of wind turbines under normal operation. A dynamic model of an induction generator for the fixed speed wind turbine was developed. The model includes the dynamics of the rotor fluxes. The model is suitable for a more detailed investigation of the mechanical-electrical interaction, both under normal and fault operation. For the variable speed wind turbine, a steadystate model, typically used in aeroelastic design, was implemented. The model can be used for normal and, to some extent, for fault operation. The reduced order dynamic model of a DFIG was implemented. The model includes only the active power controller and can be used for normal operation conditions. (au)

Author Details

African Journals Online (AJOL)

Casey, David. Vol 6, No 1 (2016) - Articles Employees, sustainability and motivation: Increasing employee engagement by addressing sustainability and corporate social responsibility. Abstract PDF. ISSN: 2224-3534. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

Feasibility study on energy saving and the reduction of CO2 emission at Petrochemical Corporation of Singapore

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A feasibility study has been executed on energy conservation and greenhouse gas emission reduction, taking up as the objects the first-period crackers and their utility related facilities at Petrochemical Corporation of Singapore (PCS). In the study, discussions were given on restructuring of the overall energy balance by using the pinch technology, adoption of the advanced recovery system (ARS) made by S and W, and a cogeneration system using gas turbine generators. As a result of the discussions for the case of using the pinch technology, ARS, and 45-MW gas turbines, the annual reduction in the fuel consumption was found to correspond to crude oil of 5.1, 3.1 and 39.0 kt, respectively. Furthermore, the annual greenhouse gas emission reduction would be 15.8, 9.7 and 120.6 kt. The total required fund for modification construction of the naphtha crackers for energy conservation would be 460 million yen, 3,700 million yen, and 5,460 million yen respectively for the pinch technology, ARS and 45-MW gas turbines. The internal profitability of the total investment would be 19% for the pinch technology, and 27% for the 45-MW gas turbines. (NEDO)

Hywind floating wind turbine project

Energy Technology Data Exchange (ETDEWEB)

Crome, Tim

2010-07-01

The Hywind floating wind turbine concept was developed by StatoilHydro. Technip was awarded the contract for engineering, fabrication and installation of a demonstration unit in May 2008 and the completed wind turbine was installed mid June 2009 at the west coast of Norway on 220 m water depth. The demonstration unit will generate 2,3 MW and is equipped with instrumentation for monitoring mooring forces, strains and motions. The fabrication of the SPAR type steel substructure was performed at Technip Offshore Finland facilities in Pori and was towed horizontally from Finland to Norway, where it was upended to a vertical position by water filling. The completed floating wind turbine was towed vertically to the final location west of Karmoey and connected to the pre-installed three legged anchor system using an Anchor Handling Tug type vessel. The wind turbine test period is scheduled to start in September 2009. Statoil will monitor the performance of the system for two years before decision will be taken for further development. The paper will present the main challenges and lessons learned through design, fabrication and installation of this first of its kind structure. Main emphasis will be on the special challenges experienced for this floating, catenary moored, slender unit which is highly exposed for wind induced forces in addition to current and waves in hostile North Sea environments. (Author)

Cavitation erosion prediction on Francis turbines

Energy Technology Data Exchange (ETDEWEB)

Bourdon, P.; Farhat, M.; Simoneau, R.; Lavigne, P. [Hydro-Quebec, Montreal, PQ (Canada); Pereira, F.; Dupont, P.; Avellan, F.; Caron, J.F. [IMHEF/EPFL, (France); Dorey, J.M.; Archer, A. [Electricite de France (EDF), 92 - Clamart (France). Dir. des Etudes et Recherches; and others

1997-12-31

On-board aggressiveness measurement methods were tested on a severely eroded prototype blade of a 266 MW Francis turbine: pressure, pit counting, DECER electrochemical and vibration measurements. The test program provided understanding of the heterogeneous erosion distribution of the prototype blades and quantitative data for comparison in subsequent tests on the model of the machine. Model tests and flow analysis were also performed, to detect cavitation on a Francis turbine model. The results are compared to those obtained on the prototype measurements. The model used for that study is built on the basis of a geometrical recovery of one of the most eroded blade of the prototype. Different methods were investigated to predict cavitation erosion on Francis turbines from model. They are based on measurement of pitting, pressure fluctuations and acceleration. The methods proposed are suitable to measure cavitation aggressiveness on model and on prototype, and that the level on the model is several orders of magnitude smaller than on the prototype. (author) 18 refs.

The swirl turbine

Science.gov (United States)

Haluza, M.; Pochylý, F.; Rudolf, P.

2012-11-01

In the article is introduced the new type of the turbine - swirl turbine. This turbine is based on opposite principle than Kaplan turbine. Euler equation is satisfied in the form gHηh = -u2vu2. From this equation is seen, that inflow of liquid into the runner is without rotation and on the outflow is a rotation of liquid opposite of rotation of runner. This turbine is suitable for small head and large discharge. Some constructional variants of this turbine are introduced in the article and theoretical aspects regarding losses in the draft tube. The theory is followed by computational simulations in Fluent and experiments using laser Doppler anemometry.

Pump Application as Hydraulic Turbine – Pump as Turbine (PaT)

OpenAIRE

Rusovs, D

2009-01-01

The paper considers pump operation as hydraulic turbine with purpose to produce mechanical power from liquid flow. The Francis hydraulic turbine was selected for comparison with centrifugal pump in reverse operation. Turbine and centrifugal pump velocity triangles were considered with purpose to evaluate PaT efficiency. Shape of impeller blades for turbine and pumps was analysed. Specific speed calculation is carried out with purpose to obtain similarity in pump and turbine description. For ...

Turbine system and adapter

Science.gov (United States)

Hogberg, Nicholas Alvin; Garcia-Crespo, Andres Jose

2017-05-30

A turbine system and adapter are disclosed. The adapter includes a turbine attachment portion having a first geometry arranged to receive a corresponding geometry of a wheelpost of a turbine rotor, and a bucket attachment portion having a second geometry arranged to receive a corresponding geometry of a root portion of a non-metallic turbine bucket. Another adapter includes a turbine attachment portion arranged to receive a plurality of wheelposts of a turbine rotor, and a bucket attachment portion arranged to receive a plurality of non-metallic turbine buckets having single dovetail configuration root portions. The turbine system includes a turbine rotor wheel configured to receive metal buckets, at least one adapter secured to at least one wheelpost on the turbine rotor wheel, and at least one non-metallic bucket secured to the at least one adapter.

Are the strategic stars aligned for your corporate brand?

Science.gov (United States)

Hatch, M J; Schultz, M

2001-02-01

In recent years, companies have increasingly seen the benefits of creating a corporate brand. Rather than spend marketing dollars on branding individual products, giants like Disney and Microsoft promote a single umbrella image that casts one glow over all their products. A company must align three interdependent elements--call them strategic stars--to create a strong corporate brand: vision, culture, and image. Aligning the stars takes concentrated managerial skill and will, the authors say, because each element is driven by a different constituency: management, employees, or stakeholders. To effectively build a corporate brand, executives must identify where their strategic stars fall out of line. The authors offer a series of diagnostic questions designed to reveal misalignments in corporate vision, culture, and image. The first set of questions looks for gaps between vision and culture; for example, when management establishes a vision that is too ambitious for the organization to implement. The second set addresses culture and image, uncovering possible gaps between the attitudes of employees and the perceptions of the outside world. The last set of questions explores the vision-image gap--is management taking the company in a direction that its stake-holders support? The authors discuss the benefits of a corporate brand, such as reducing marketing costs and building a sense of community among customers. But they also point to cases in which a corporate brand doesn't make sense--for instance, if you are a product incubator, if you've recently experienced M&A activity, or if you are expecting fallout from risky ventures.

Measures to increase the UK-manufactured content of wind turbines

International Nuclear Information System (INIS)

1996-01-01

Little formal work has been undertaken on the subject of component supply. Garrad Hassan (GH) has provided consultancy services to the UK and international wind energy industry, including almost all European wind turbine manufacturers, for more than a decade. Most of this report is based on that experience. Over this period, a good understanding of the market for wind turbines and the associated components has developed. (author)

HIGH EFFICIENCY TURBINE

OpenAIRE

VARMA, VIJAYA KRUSHNA

2012-01-01

Varma designed ultra modern and high efficiency turbines which can use gas, steam or fuels as feed to produce electricity or mechanical work for wide range of usages and applications in industries or at work sites. Varma turbine engines can be used in all types of vehicles. These turbines can also be used in aircraft, ships, battle tanks, dredgers, mining equipment, earth moving machines etc, Salient features of Varma Turbines. 1. Varma turbines are simple in design, easy to manufac...

45 CFR 2507.12 - Authority.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Authority. 2507.12 Section 2507.12 Public Welfare... FOR DISCLOSURE OF RECORDS UNDER THE FREEDOM OF INFORMATION ACT § 2507.12 Authority. The Corporation receives authority to change its governing regulations from the National and Community Service Act of 1990...

Models for wind turbines - a collection

DEFF Research Database (Denmark)

2002-01-01

This report is a collection of notes which were intended to be short communications. Main target of the work presented is to supply new approaches to stability investigations of wind turbines. The author's opinion is that an efficient, systematicstability analysis can not be performed for large...

Auditors' Experience with Corporate Psychopaths

DEFF Research Database (Denmark)

Klarskov Jeppesen, Kim; Leder, Christina

2016-01-01

Purpose: The purpose of this paper is to analyse auditors’ experience with corporate psychopaths in their client management. Design/methodology/approach: The research was conducted as a survey among Danish state-authorized auditors, to which 179 auditors responded, representing 9% of the total...... population. Findings: Of the participating auditors, 69% had experienced corporate psychopaths in their client management and 70% of these had experienced more than one case. In addition, 43% of the auditors who had experienced psychopathic managers reported that they had committed fraud. The vast majority...... of cases were detected in the execution and completion phases of the audit and resulted in increased professional scepticism, the use of more experienced auditors and the requirement for more and better audit evidence. Research limitations/implications: The findings confirm that corporate psychopaths...

Corporate Governance: A Keynote Speech

DEFF Research Database (Denmark)

Balling, Morten

1998-01-01

In the article, the author gives an overview of the many different aspects of corporate governance to discuss at a conference in Budapest in May 1997 arranged by Société Universitaire Européenne de Recherches Financières (SUERF). Among the subjects dealt with are the relationsship between...... cases of privatization in Western Europe. Almost everywhere, the role of institutional shareholders is increasing. The internationalization proces implies that also the role of the governance systems changes the incentives for corporate managers to demonstrate good financial performance, and there seems...

Effects of wind turbines on UHF television reception: field tests in Denmark

International Nuclear Information System (INIS)

Sorenson, B.

1992-01-01

As a result of a planning application for a windfarm comprising 20 wind turbines at Tynewydd Farm, Gilfach Goch in Mid Glamorgan, a report discussing any detrimental effects the proposal might have on u.h.f. television reception was produced. In order to make the report as definitive as possible, it was decided to carry out field tests on the exact model of wind turbine to be used at Tynewydd. This required a field trip to Denmark, and the opportunity was taken to make measurements on two other models of turbine at the same time. This report presents the analysis of the results for all three turbines. (author)

Hubungan Corporate Governance, Corporate Social Responsibilities dan Corporate Financial Performance Dalam Satu Continuum

OpenAIRE

Etty Murwaningsari

2009-01-01

This research aims to identify the influence of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance, and also to observe the possible influence of Corporate Social Responsibility on Corporate Financial Performance. This research examines 126 manufacturing companies which are listed in Indonesian Stock Exchange (ISX) and have issued an audited financial statement for 2006. The statist...

The swirl turbine

International Nuclear Information System (INIS)

Haluza, M; Pochylý, F; Rudolf, P

2012-01-01

In the article is introduced the new type of the turbine - swirl turbine. This turbine is based on opposite principle than Kaplan turbine. Euler equation is satisfied in the form gHη h = −u 2 v u2 . From this equation is seen, that inflow of liquid into the runner is without rotation and on the outflow is a rotation of liquid opposite of rotation of runner. This turbine is suitable for small head and large discharge. Some constructional variants of this turbine are introduced in the article and theoretical aspects regarding losses in the draft tube. The theory is followed by computational simulations in Fluent and experiments using laser Doppler anemometry.

75 FR 70226 - Mackay Bar Corporation; Notice of Authorization for Continued Project Operation

Science.gov (United States)

2010-11-17

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 3041-004] Mackay Bar... Mackay Bar Corporation, licensee for the Hettinger Hydroelectric Project, filed an Application to..., notice is hereby given that an annual license for Project No. 3041 is issued to the Mackay Bar...

Small Vertical Axis Wind Turbines: aerodynamics and starting behavior

Directory of Open Access Journals (Sweden)

Horia DUMITRESCU

2013-12-01

Full Text Available In urban areas the wind is very turbulent and unstable with fast changes in direction andvelocity. In these environments, the use of small vertical axis wind turbines (VAWT becomesincreasingly attractive due to several advantages over horizontal axis wind turbines (HAWT.However, such designs have received much less attention than the more common propeller-typedesigns and the understanding of same aspects of their operation remains, to this day, incomplete.This is particularly true of their starting characteristics. Indeed, same authors heuristically maintainthat they cannot start without external assistance. This paper reviews the cause of the inability of thelow solidity fixed pitch vertical axis wind turbines to self-start, and investigates the way ofovercoming this draw back.

Simulation of gas turbines operating in off-design condition

Energy Technology Data Exchange (ETDEWEB)

Walter, Arnaldo [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mail: walter@fem.unicamp.br

2000-07-01

In many countries thermal power plants based on gas turbines have been the main option for new investment into the electric system due to their relatively high efficiency and low capital cost. Cogeneration systems based on gas turbines have also been an important option for the electric industry. Feasibility studies of power plants based on gas turbine should consider the effect of atmospheric conditions and part-load operation on the machine performance. Doing this, an off-design procedure is required. A G T off-design simulation procedure is described in this paper. Ruston R M was used to validate the simulation procedure that, general sense, presents deviations lower than 2.5% in comparison to manufacturer's data. (author)

How the factoid of wind turbines causing 'vibroacoustic disease' came to be 'irrefutably demonstrated'.

Science.gov (United States)

Chapman, Simon; St George, Alexis

2013-06-01

In recent years, claims have proliferated in cyberspace that wind turbines cause a large variety of symptoms and diseases. One of these, "vibroacoustic disease" (VAD) is frequently mentioned. The aim of this study is to examine the quality of the evidence on how VAD came to be associated with wind turbine exposure by wind farm opponents. Searches of the web (Google advanced) and major research databases for papers on VAD and wind turbines. Self-citation analysis of research papers on VAD. Google returned 24,700 hits for VAD and wind turbines. Thirty-five research papers on VAD were found, none reporting any association between VAD and wind turbines. Of the 35 papers, 34 had a first author from a single Portuguese research group. Seventy-four per cent of citations to these papers were self-citations by the group. Median self-citation rates in science are around 7%. Two unpublished case reports presented at conferences were found asserting that VAD was "irrefutably demonstrated" to be caused by wind turbines. The quality of these reports was abject. VAD has received virtually no scientific recognition beyond the group who coined and promoted the concept. There is no evidence of even rudimentary quality that vibroacoustic disease is associated with or caused by wind turbines. The claim that wind turbines cause VAD is a factoid that has gone 'viral' in cyberspace and may be contributing to nocebo effects among those living near turbines. © 2013 The Authors. ANZJPH © 2013 Public Health Association of Australia.

CORPORATE SOCIAL RESPONSIBILITY: OPTIONAL OR REGULATORY

Directory of Open Access Journals (Sweden)

MIHAELA IRINA IONESCU

2012-05-01

Full Text Available Given the collateral activity developed and the economic background of the present author I took the approach of a topic that includes aspects from both fields, namely “Corporate Social responsibility- optional or regulatory”. Through the paper I will try to summarize the pros and cons of regulation, mandatory of corporate social responsibility and to review, present the ways in which countries with advanced economies in European Union and the EU itself have addressed this issue.

Corporate Responsibility

DEFF Research Database (Denmark)

Waddock, Sandra; Rasche, Andreas

2015-01-01

We define and discuss the concept of corporate responsibility. We suggest that corporate responsibility has some unique characteristics, which makes it different from earlier conceptions of corporate social responsibility. Our discussion further shows commonalities and differences between corporate...... responsibility and related concepts, such as corporate citizenship and business ethics. We also outline some ways in which corporations have implemented corporate responsibility in practice....

Corporal and capital punishment of juveniles.

Science.gov (United States)

Frazier, H C

1990-01-01

There is a previously unobserved connection between corporal punishment of public school children and capital punishment of juveniles. Both are barometers of acceptable levels of violent punishment and their elimination is a hallmark of a maturing and decent society. Within a majority of the eighteen states where school authorities most frequently strike children are housed 25 of the nation's 28 juvenile death row inmates. On average, the homicide rates of these jurisdictions are two and a half times greater than those that have abolished both state-sanctioned corporal and capital punishment or limit death sentences to those age eighteen and older at the time of their crime(s). Most of the eighteen state abolitions of corporal punishment occurred in the 1980's. The US Supreme Court has ruled both corporal and capital punishment of juveniles constitutional. Additional state legislative abolition of both is anticipated in the 1990s.

Characteristics of reversible-pump turbines

Energy Technology Data Exchange (ETDEWEB)

Olimstad, Grunde

2012-07-01

The primary goal for this PhD project has been to investigate instability of reversible-pump turbines (RPTs) as a phenomenon and to find remedies to solve it. The instability occurs for turbines with s-shaped characteristics, unfavourable waterway and limited rotating inertia. It is only observed for certain operation pints at either high speed or low load. These correspond to ether high values of Ned or low values of Qed. The work done in this PhD thesis can be divided in to the three following categories. Investigate and understand the behaviour of a pump turbine: A model was designed in order to investigate the pump turbine behaviour related to its characteristics. This model was manufactured and measurements were performed in the laboratory. By using throttling valves or torque as input the full s-shaped characteristics was measured. When neither of these techniques is used, the laboratory system has unstable operation points which result in hysteresis behaviour. Global behaviour of the RPT in power plant system was investigated through analytical stability analysis and dynamic system simulations. The latter included both rigid and elastic representation of the water column. Turbine internal flow: The flow inside the runner was investigated by computer simulations (CFD). Two-dimensional analysis was used to study the inlet part of the runner. This showed that a vortex forming at the inlet is one of the causes for the unstable operation range. Measurements at different pressure levels showed that the characteristics were dependent on the Reynolds number at high Ned values in turbine mode. This means that the similarity of flows is not sufficiently described by constant Qed and Ned values at this part of the characteristics. Design modifications: The root of the stability problem was considered to be the runners geometric design at the inlet in turbine mode. Therefore different design parameters were investigated to find relations to the characteristics. Methods

Research on Darrieus-type hydraulic turbine for extra-low head hydropower utilization

International Nuclear Information System (INIS)

Furukawa, A; Watanabe, S; Okuma, K

2012-01-01

A Darrieus-type turbine has been investigated for extra-low head hydropower utilization. In the present paper, authors'research on Darrieus-type hydraulic turbine is briefly reviewed. The working principle of Darrieus turbine is explained with advantage of its simple structure, at first. Then the fluid-dynamic difference between rotating and linear motions of a blade in a uniform flow is clarified with guiding principle of high performance design of Darrieus turbine. Cavitation problem is also described. Next, effects of duct-casing, consisting of an intake, runner section and draft tube, are discussed and a simplified structure of Darrieus turbine is shown by installing the inlet nozzle. Finally, in the practical use, an adjustment of inlet nozzle section by lowering the inlet nozzle height is proposed when flow rate is varied temporally and seasonally.

Gas turbine engine turbine blade damaging estimate in maintenance

Directory of Open Access Journals (Sweden)

Ель-Хожайрі Хусейн

2004-01-01

Full Text Available  The factors determining character and intensity of corrosive damages of gas turbine blades are analyzed in the article. The classification of detrimental impurities polluting gas turbine airflow duct and injuring blade erosion damages are given. Common features of the method of turbine blade corrosive damage estimation are shown in the article.

Author Details

African Journals Online (AJOL)

Nandonde, FA. Vol 6, No 1-2 (2012) - Articles Understanding Corporate Social Responsibility as Implemented by SMEs in Tanzania: The Case of the Hotel Industry Abstract. ISSN: 0148-2963. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

Author Details

African Journals Online (AJOL)

Mukokoma, MM. Vol 2, No 1 (2009) - Articles Application and Effectiveness of New Public Management in National Water and Sewerage Corporation Abstract. ISSN: 2070-1748. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners ...

Author Details

African Journals Online (AJOL)

Elifneh, YW. Vol 4, No 2 (2014) - Articles The Corporate Social Responsibility Practices and Concerns of Addis Ababa University: Implications for Higher Learning Institutions in Ethiopia Abstract PDF. ISSN: 2410-2393. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

Simulation of wind turbine wakes using the actuator line technique.

Science.gov (United States)

Sørensen, Jens N; Mikkelsen, Robert F; Henningson, Dan S; Ivanell, Stefan; Sarmast, Sasan; Andersen, Søren J

2015-02-28

The actuator line technique was introduced as a numerical tool to be employed in combination with large eddy simulations to enable the study of wakes and wake interaction in wind farms. The technique is today largely used for studying basic features of wakes as well as for making performance predictions of wind farms. In this paper, we give a short introduction to the wake problem and the actuator line methodology and present a study in which the technique is employed to determine the near-wake properties of wind turbines. The presented results include a comparison of experimental results of the wake characteristics of the flow around a three-bladed model wind turbine, the development of a simple analytical formula for determining the near-wake length behind a wind turbine and a detailed investigation of wake structures based on proper orthogonal decomposition analysis of numerically generated snapshots of the wake. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

How to compute the power of a steam turbine with condensation, knowing the steam quality of saturated steam in the turbine discharge

Energy Technology Data Exchange (ETDEWEB)

Hernandez Albarran, Manuel Jaime; Krever, Marcos Paulo Souza [Braskem, Sao Paulo, SP (Brazil)

2009-07-01

To compute the power and the thermodynamic performance in a steam turbine with condensation, it is necessary to know the quality of the steam in the turbine discharge and, information of process variables that permit to identifying with high precision the enthalpy of saturated steam. This paper proposes to install an operational device that will expand the steam from high pressure point on the shell turbine to atmosphere, both points with measures of pressure and temperature. Arranging these values on the Mollier chart, it can be know the steam quality value and with this data one can compute the enthalpy value of saturated steam. With the support of this small instrument and using the ASME correlations to determine the equilibrium temperature and knowing the discharge pressure in the inlet of surface condenser, the absolute enthalpy of the steam discharge can be computed with high precision and used to determine the power and thermodynamic efficiency of the turbine. (author)

Role of the Occupational Physician in Corporate Management of Health Risks: An Important Aspect of Corporate Social Responsibility (CSR).

Science.gov (United States)

Sugita, Minoru; Miyakawa, Michiko

2016-01-01

understand the merit of occupational physicians working with the management to decrease health risks. However, an occupational physician is an important member of the corporation, so he/she must be involved in the management of health risks not only within the corporation itself, but also outside the corporation from the viewpoint of CSR. Effective management of health risks due to corporate activities should be widely discussed among occupational physicians, business entrepreneurs and managers of the division in charge of corporate health risk management as well as stakeholders. The authors propose expanding the role of occupational physicians to actively manage health risks not only inside but also outside the corporations.

Sovereign Wealth Funds – the New Challenge for Corporate Governance

Directory of Open Access Journals (Sweden)

Dariusz Urban

2010-10-01

Full Text Available The article discusses Sovereign Wealth Funds with reference do the process of corporate governance. In the first part the paper presents the rise, growth and current investment activity of those funds. In the second section the author consider reasons for implementation of corporate governance best practices. The last part of the paper compares Santiago Principles with OECD principles of corporate governance.

Corporate plan 1994/95 to 1998/99

International Nuclear Information System (INIS)

1994-04-01

The National Radiological Protection Board is a public authority established by the Radiological Protection Act 1970. As with all non-departmental public bodies it is required to prepare a Corporate Plan against which its performance and the relevance of its activities to contemporary requirements can be measured. The Board has produced annual Corporate Plans since 1986. In this issue, summary sections on background, objectives, and finances are followed by fifteen sections describing the major areas of work in a structured manner with the Plan objectives, achievements, and alterations set out. Altogether, the Plan shows a good level of attainment and a clear sense of direction. (author)

Hydraulic turbines and auxiliary equipment

Energy Technology Data Exchange (ETDEWEB)

Luo Gaorong [Organization of the United Nations, Beijing (China). International Centre of Small Hydroelectric Power Plants

1995-07-01

This document presents a general overview on hydraulic turbines and auxiliary equipment, emphasizing the turbine classification, in accordance with the different types of turbines, standard turbine series in China, turbine selection based on the basic data required for the preliminary design, general hill model curves, chart of turbine series and the arrangement of application for hydraulic turbines, hydraulic turbine testing, and speed regulating device.

Wind power production: from the characterisation of the wind resource to wind turbine technologies

International Nuclear Information System (INIS)

Beslin, Guy; Multon, Bernard

2016-01-01

Illustrated by graphs and tables, this article first describes the various factors and means related to the assessment of wind resource in the World, in Europe, and the factors which characterize a local wind resource. In this last respect, the authors indicate how local topography is taken into account to calculate wind speed, how time variations are taken into account (at the yearly, seasonal or daily level), the different methods used to model a local wind resource, how to assess the power recoverable by a wind turbine with horizontal axis (notion of Betz limit). In the second part, the authors present the different wind turbines, their benefits and drawbacks: vertical axis, horizontal axis (examples of a Danish-type wind turbine, of wind turbines designed for extreme conditions). Then, they address the technology of big wind turbines: evolution of technology and of commercial offer, aerodynamic characteristics of wind turbine and benefit of a varying speed (technological solutions, importance of the electric generator). They describe how to choose a wind turbine, how product lines are organised, how the power curve and energy capacity are determined. The issue of integration of wind energy into the power system is then addressed. The next part addressed the economy of wind energy production (annualized production cost, order of magnitude of wind electric power production cost). Future trends are discussed and offshore wind energy production is briefly addressed

Welding repair of the steam and gas turbines rotors made of Cr-Mo-V steel

International Nuclear Information System (INIS)

Mazur, Z.; Kubiak, J.; Hernandez, A.

1999-01-01

An analysis of typical steam turbine and gas turbine rotor failures is carried out. On the base of the rotors different failure causes and their mode of occurring, an evaluation of the weldability of the Cr-Mo-V steels and the classification of the common turbine rotors repair possibilities is presented. The developing of specific in-situ welding repair process of the damaged 20.65 MW gas turbine rotor is described. After repair, the rotor was put back into service. (Author) 15 refs

Gas Turbine Engine Having Fan Rotor Driven by Turbine Exhaust and with a Bypass

Science.gov (United States)

Suciu, Gabriel L. (Inventor); Chandler, Jesse M. (Inventor)

2016-01-01

A gas turbine engine has a core engine incorporating a core engine turbine. A fan rotor is driven by a fan rotor turbine. The fan rotor turbine is in the path of gases downstream from the core engine turbine. A bypass door is moveable from a closed position at which the gases from the core engine turbine pass over the fan rotor turbine, and moveable to a bypass position at which the gases are directed away from the fan rotor turbine. An aircraft is also disclosed.

Study on an Undershot Cross-Flow Water Turbine with Straight Blades

Directory of Open Access Journals (Sweden)

Yasuyuki Nishi

2015-01-01

Full Text Available Small-scale hydroelectric power generation has recently attracted considerable attention. The authors previously proposed an undershot cross-flow water turbine with a very low head suitable for application to open channels. The water turbine was of a cross-flow type and could be used in open channels with the undershot method, remarkably simplifying its design by eliminating guide vanes and the casing. The water turbine was fitted with curved blades (such as the runners of a typical cross-flow water turbine installed in tube channels. However, there was ambiguity as to how the blades’ shape influenced the turbine’s performance and flow field. To resolve this issue, the present study applies straight blades to an undershot cross-flow water turbine and examines the performance and flow field via experiments and numerical analyses. Results reveal that the output power and the turbine efficiency of the Straight Blades runner were greater than those of the Curved Blades runner regardless of the rotational speed. Compared with the Curved Blades runner, the output power and the turbine efficiency of the Straight Blades runner were improved by about 31.7% and about 67.1%, respectively.

RUSSIAN CORPORATIONS: THE PROBLEM OF INTRACORPORATE RELATIONS AND INTERESTS

Directory of Open Access Journals (Sweden)

Olga Brizhak

2015-09-01

Full Text Available The article actualizes the problem of the study of intra-corporate relations and economic interests of the various economic actors involved in the corporate environment of the Russian economy. The author considers the specific conditions of socio-economic and innovative development of Russian big business.

25 CFR 226.8 - Corporation and corporate information.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Corporation and corporate information. 226.8 Section 226... RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation and corporate information. (a) If the applicant for a lease is a corporation, it shall file evidence of...

Aeroelastic optimization of MW wind turbines

Energy Technology Data Exchange (ETDEWEB)

Hartvig Hansen, M.; Zahle, F.

2011-12-15

This report contains the results from the Energy Development and Demonstration Project ''Aeroelastic Optimization of MW wind turbine'' (AeroOpt). The project has had the following five Work Packages: 1. Geometric non-linear, anisotropic beam element for HAWC2. 2. Closed-loop eigenvalue analysis of controlled wind turbines. 3. Resonant wave excitation of lateral tower bending modes. 4. Development of next generation aerodynamic design tools. 5. Advanced design and verification of airfoils. The purposes of these Work Packages are briefly described in the Preface and a summary of the results are given in Section 2. Thereafter, the results from each Work Package are described in eight subsequent chapters. (Author)

The importance of site selection for setting up a wind turbine

Energy Technology Data Exchange (ETDEWEB)

Raghunandan, A.; Gowda, G.; Pandian, A. [MS RAMAIAH Institute of Technology, Bangalore (India); Ramanan, G. [RV College of Engineering, Bangalore (India)

2012-07-01

A wind energy system transforms the kinetic energy of the wind into mechanical or electrical energy that can be harnessed for practical use. Building a wind turbine is far more than simply a matter of finding a field or mountaintop where the wind is blowing and plopping one down. A great deal of attention should be given to finding the proper site for a wind turbine. The main factor one should consider is the average speed of the wind over an extended time. Estimation of the wind power potential for a site is the most important requirement for selecting a site for the installation of a wind turbine. Also wind turbines should be sited well above trees, buildings, and other obstacles else, the result will be poor energy production and increased wear and tear on the turbine. One way to get rid of this is to place the wind turbine on a tall tower. When selecting a place for setting up a wind turbine, engineers consider factors such as wind hazards, characteristics of the land that affect wind speed, and the effects of one turbine on nearby turbines in wind farms. The other factors that are important for selecting a site for installation of wind turbines are Hill effect, Roughness, or the amount of friction that Earth's surface exerts on wind, Tunnel effect, Turbulence, Variations in wind speed, Wind obstacles and Wind shear. This paper will emphasis on the necessary inspections which are to be done on the site before installing a Wind Turbine. (Author)

Grid fault and design-basis for wind turbines. Final report

Energy Technology Data Exchange (ETDEWEB)

Hansen, A.D.; Cutululis, N.A.; Markou, H.; Soerensen, Poul; Iov, F.

2010-01-15

the structural loads, have also been proposed and investigated during the project. Statistics in terms of mean value and standard deviation have been analysed and rainflow calculations have been performed to estimate the impact over the lifetime of a variable speed wind turbine. (author)

Author Details

African Journals Online (AJOL)

Kumar, R. Sreevalsa. Vol 34, No 1 (2018) - Articles Students' experience and attitude towards corporal punishment in the elementary schools of the central zone of Tigray Region in Ethiopia Abstract. ISSN: 1684-4173. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

Author Details

African Journals Online (AJOL)

Erasmus, P. Vol 20, No 1 (2016) - Articles Advances in the corporate governance practices of Johannesburg Stock Exchange companies. Abstract PDF. ISSN: 1998-8125. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Igwe, Kingsley N. Vol 8, No 1 (2017) - Articles Delivery of community information service as corporate social responsibility by librarians in Nigerian tertiary institutions. Abstract PDF. ISSN: 2360-994X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

Transient and dynamic control of a variable speed wind turbine with synchronous generator

Energy Technology Data Exchange (ETDEWEB)

Jauch, Clemens [Riso National Laboratory, Wind Energy Department, PO Box 49, DK 4000 Roskilde, (Denmark)

2007-02-14

In this article, a controller for dynamic and transient control of a variable speed wind turbine with a full-scale converter-connected high-speed synchronous generator is presented. First, the phenomenon of drive train oscillations in wind turbines with full-scale converter-connected generators is discussed. Based on this discussion, a controller is presented that dampens these oscillations without impacting on the power that the wind turbine injects into the grid. Since wind turbines are increasingly demanded to take over power system stabilizing and control tasks, the presented wind turbine design is further enhanced to support the grid in transient grid events. A controller is designed that allows the wind turbine to ride through transient grid faults. Since such faults often cause power system oscillations, another controller is added that enables the turbine to participate in the damping of such oscillations. It is concluded that the controllers presented keep the wind turbine stable under any operating conditions, and that they are capable of adding substantial damping to the power system. (Author).

Utility scale wind turbines on a grid-connected island: A feasibility study

Energy Technology Data Exchange (ETDEWEB)

Dua, Mohit; Manwell, James F.; McGowan, Jon G. [Department of Mechanical and Industrial Engineering, Renewable Energy Research Laboratory (RERL), University of Massachusetts, Amherst, MA 01003 (United States)

2008-04-15

This paper analyzes the technical and economic feasibility of installing utility-scale wind turbines on the Fox Islands, located 12 miles from the coast of Maine in the United States. Three locations on the islands, as well as a near offshore site, are analyzed in detail as potential sites for wind turbine installations. As discussed in this work, the logistic problems of transporting and installing wind turbines on the island require innovative solutions. These include locally available amphibious vessels, which can land turbine components at suitable shallow spots on the island, self-erecting towers, which allow use of a smaller crane for installation, and a special turbine foundation suitable for the local ground conditions. In the economic analysis, in addition to standard life-cycle parameters, renewable energy credits (REC) were also included. This work concludes that the installation of sub-megawatt wind turbines on the island is logistically possible and will lead to a reduction in the cost of electricity to the customers. (author)

Fatigue Damage Estimation and Data-based Control for Wind Turbines

DEFF Research Database (Denmark)

Barradas Berglind, Jose de Jesus; Wisniewski, Rafal; Soltani, Mohsen

2015-01-01

based on hysteresis operators, which can be used in control loops. The authors propose a data-based model predictive control (MPC) strategy that incorporates an online fatigue estimation method through the objective function, where the ultimate goal in mind is to reduce the fatigue damage of the wind......The focus of this work is on fatigue estimation and data-based controller design for wind turbines. The main purpose is to include a model of the fatigue damage of the wind turbine components in the controller design and synthesis process. This study addresses an online fatigue estimation method...... turbine components. The outcome is an adaptive or self-tuning MPC strategy for wind turbine fatigue damage reduction, which relies on parameter identification on previous measurement data. The results of the proposed strategy are compared with a baseline model predictive controller....

Corporate Governance: Can Universities Learn from the Private Sector?

Science.gov (United States)

Henze, Raphaela

2010-01-01

Corporate governance has several objectives: growth, transparency, leadership, social responsibility and trust, as well as the protection of shareholders and company assets. It also plays a key role in determining a company's control environment. In this article, the author takes a closer look at corporate governance in the private sector,…

The 52-inch last-stage blades for steam turbines

International Nuclear Information System (INIS)

Suzuki, Atsuhide; Hisa, Shoichi; Nagao, Shin-ichiro; Ogata, Hisao

1986-01-01

The last-stage blades (LSB) of steam turbines are one of the most important components determining the plant's maximum capacity and efficiency. The development of LSBs necessitates high-technology including advanced methods of analyses and verifications as well as ample accumulation of technical data. The 52-inch LSB recently developed by Toshiba has raised nuclear power plant's capacity up to 1,300 ∼ 1,800 MW, has effected compact design of turbine units, and has improved thermal efficiency, keeping high reliability. (author)

Exploring work-related issues on corporate sustainability.

Science.gov (United States)

Brunoro, C M; Bolis, I; Sznelwar, L I

2015-01-01

In a research project about work-related issues and corporate sustainability conducted in Brazil, the goal was to better understand how work-related issues were addressed in the corporate context. Particularly, there are some specific initiatives that serve as guides to organizational decisions, which make their performance indicators for the context of corporate sustainability. 1) To explore the presence of work-related issues and their origins in corporate sustainability approach, analyzing a) corporate disclosures; b) sustainability guidelines that are identified as relevant in corporate disclosures; c) documents that are related to sustainable development and also identified as key-documents for these guidelines and initiatives. 2) To present the activity-centered ergonomics and psychodynamics of work contributions to work-related issues in a corporate sustainability approach. An exploratory study based on multiple sources of evidence that were performed from 2012 to 2013, including interviews with companies that engaged in corporate sustainability and document analysis using the content analysis approach. Work-related issues have been presented since the earliest sustainable development documents. It is feasible to construct an empirical framework for work-related issues and corporate sustainability approaches. 1) Although some authors argue that corporate sustainability has its roots based only on the environmental dimension, there is strong empirical evidence showing that social dimension aspects such as work-related issues have been present since the beginning. 2) Some indicators should be redesigned to more precisely translate the reality of some workplaces, particularly those indicators related to organizational design and mental health.

A comparison between the dynamics of horizontal and vertical axis offshore floating wind turbines.

Science.gov (United States)

Borg, M; Collu, M

2015-02-28

The need to further exploit offshore wind resources in deeper waters has led to a re-emerging interest in vertical axis wind turbines (VAWTs) for floating foundation applications. However, there has been little effort to systematically compare VAWTs to the more conventional horizontal axis wind turbine (HAWT). This article initiates this comparison based on prime principles, focusing on the turbine aerodynamic forces and their impact on the floating wind turbine static and dynamic responses. VAWTs generate substantially different aerodynamic forces on the support structure, in particular, a potentially lower inclining moment and a substantially higher torque than HAWTs. Considering the static stability requirements, the advantages of a lower inclining moment, a lower wind turbine mass and a lower centre of gravity are illustrated, all of which are exploitable to have a less costly support structure. Floating VAWTs experience increased motion in the frequency range surrounding the turbine [number of blades]×[rotational speed] frequency. For very large VAWTs with slower rotational speeds, this frequency range may significantly overlap with the range of wave excitation forces. Quantitative considerations are undertaken comparing the reference NREL 5 MW HAWT with the NOVA 5 MW VAWT. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

39 CFR 222.1 - Authority to administer postal affairs.

Science.gov (United States)

2010-07-01

..., or in any other Postal Service employee. (b) Corporate officers. Corporate officers are authorized to... matters within their areas of responsibility, except as limited by law or by the specific terms of their...

Starting-up sequence of the AWEC-60 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la.

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions. This report shows the graphic information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m. diameter and 1200 kW of rated power, recorded in April 1991 and cut-out wind speed. (author)

Aerodynamics of Wind Turbines

DEFF Research Database (Denmark)

Hansen, Martin Otto Laver

Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its second edition, it has been entirely updated and substantially extended to reflect advances in technology, research into rotor aerodynamics and the structural...... response of the wind turbine structure. Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element...... Momentum method is also covered, as are eigenmodes and the dynamic behavior of a turbine. The new material includes a description of the effects of the dynamics and how this can be modeled in an aeroelastic code, which is widely used in the design and verification of modern wind turbines. Further...

Aerodynamics of wind turbines

DEFF Research Database (Denmark)

Hansen, Martin Otto Laver

Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its third edition, it has been substantially updated with respect to structural dynamics and control. The new control chapter now includes details on how to design...... Turbines (VAWT). Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method...... is also covered, as are eigenmodes and the dynamic behaviour of a turbine. The book describes the effects of the dynamics and how this can be modelled in an aeroelastic code, which is widely used in the design and verification of modern wind turbines. Furthermore, it examines how to calculate...

Author Details

African Journals Online (AJOL)

Agba, A.M. Vol 5, No 1 (2010) - Articles Leadership style and employees' intrinsic job satisfaction in the cross river newspaper corporation, Calabar, Nigeria Abstract PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Olabisi, JO. Vol 7, No 1 (2013) - Articles Appraisal of Strategic Alliances and Corporate Effectiveness Abstract PDF. ISSN: 2070-0083. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

Author Details

African Journals Online (AJOL)

Iguh, NA. Vol 2 (2011) - Articles An Examination of the Child Rights Protection and Corporal Punishment in Nigeria Abstract PDF. ISSN: 2276-7371. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

Author Details

African Journals Online (AJOL)

Edet, AO. Vol 12, No 1 (2012) - Articles Effects of Corporal Punishment on Disciplinary Control of Secondary School Students in Calabar Metropolis of Nigeria Abstract. ISSN: 1596-6224. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Author Details

African Journals Online (AJOL)

Mbamba, Ulingeta O.L.. Vol 14, No 1-2 (2014) - Articles Managers' Perceptions of the Role of Corporate Social Responsibility in the Growth of Firms: Evidence from Tanzania Abstract. ISSN: 2591 6831. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about ...

Author Details

African Journals Online (AJOL)

Akinsulore, Adedoyin. Vol 7, No 1 (2016) - Articles The effects of legislation on corporate social responsibility in the minerals and mines sector of Nigeria Abstract PDF. ISSN: 2467-8392. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Algebraic approach for the diagnosis of turbine cycles in nuclear power plants

International Nuclear Information System (INIS)

Heo, Gyunyoung; Chang, Soon Heung

2005-01-01

According to plant operating staff's practical needs, authors proposed a diagnosis model to identify the performance degradation of steam turbine cycles in nuclear power plants (NPPs). The essential idea of this study is how to identify the intrinsically degraded component which causes electric loss. Authors found that there were not so many turbine cycle diagnosis applications in NPPs currently because of technical, financial, or social characteristics of the plant. So a great part of the diagnosis has been dependent on operating staff's experience and knowledge. However as economic competition becomes severe, the efficiency staffs is asking for reliable and practical advisory tools. For the solution of these shortcomings, authors proposed a simple and intuitive diagnosis concept based on the superposition rule of degradation phenomena, which can be derived by simple algebra and correlation analysis. Though the superposition rule is not so significant statistically, almost all of the performance indices under normal operation are fairly compatible with this model. Authors developed a prototype model of quantitative root-cause diagnosis and validated the background theory using the simulated data. The turbine cycle advisory system using this model was applied to Gori NPP units 3 and 4

Elimination of corporal punishment of children's a human right

Directory of Open Access Journals (Sweden)

Stevanović Ivana

2010-01-01

Full Text Available The authors indicate the necessity of explicit legal prohibition of all corporal punishment of children that represent a violation of the right of the child to respect his/her physical integrity and human dignity. The paper emphasizes why all corporal punishment of children should be prohibited and points out the progress made at the legislative level to the elimination of all corporal punishment of children in some member states of the Council of Europe and the Republic of Serbia.

The social acceptability of wind turbines: some resident are ready to pay to keep their wind turbines

International Nuclear Information System (INIS)

2009-04-01

The author proposes a synthesis of a survey performed on four wind farms located in different French regions. It appears that only 5 % of residents feel that wind turbines are disturbing, that a dismantling would be detrimental to the resident well-being, that site expansions are well perceived in terms of social well-being, that residents do not really prefer small wind farms. The author outlines that the obtained results cannot be applied to other sites

Unsteady aerodynamic analysis for offshore floating wind turbines under different wind conditions.

Science.gov (United States)

Xu, B F; Wang, T G; Yuan, Y; Cao, J F

2015-02-28

A free-vortex wake (FVW) model is developed in this paper to analyse the unsteady aerodynamic performance of offshore floating wind turbines. A time-marching algorithm of third-order accuracy is applied in the FVW model. Owing to the complex floating platform motions, the blade inflow conditions and the positions of initial points of vortex filaments, which are different from the fixed wind turbine, are modified in the implemented model. A three-dimensional rotational effect model and a dynamic stall model are coupled into the FVW model to improve the aerodynamic performance prediction in the unsteady conditions. The effects of floating platform motions in the simulation model are validated by comparison between calculation and experiment for a small-scale rigid test wind turbine coupled with a floating tension leg platform (TLP). The dynamic inflow effect carried by the FVW method itself is confirmed and the results agree well with the experimental data of a pitching transient on another test turbine. Also, the flapping moment at the blade root in yaw on the same test turbine is calculated and compares well with the experimental data. Then, the aerodynamic performance is simulated in a yawed condition of steady wind and in an unyawed condition of turbulent wind, respectively, for a large-scale wind turbine coupled with the floating TLP motions, demonstrating obvious differences in rotor performance and blade loading from the fixed wind turbine. The non-dimensional magnitudes of loading changes due to the floating platform motions decrease from the blade root to the blade tip. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

CO{sub 2} expansion work recovery by impulse turbine

Energy Technology Data Exchange (ETDEWEB)

Toendell, Espen

2006-07-01

This study focuses on refrigeration processes with relatively low cooling capacities and hereby low circulation rates. The presented theory for turbines focuses on work extraction in impulse turbines. For an impulse turbine, the optimal rotational speed gives a turbine blade tip speed equal to half the nozzle jet velocity. With small volume flow rates, the turbine will have small dimensions, and hereby the rotational speed will be high. Together with principles for work extraction, the losses in the turbine were discussed. The main losses are nozzle losses (Friction and incomplete flashing), rotational losses, disc friction, windage, changing angles, non-rotational losses, fluid friction between jet and turbine blade, jet not hitting turbine blade, mechanical losses in bearings. A literature survey was made to show some examples on two-phase turbines and to create a theoretical basis for fluid expansion in a nozzle. The literature survey on two-phase expanders showed some examples on Helium expanders with small dimensions and good efficiencies. Compared to a helium expander, a CO{sub 2} expander will be working on a higher pressure, and hereby some extra losses must be expected. Some work on expander for R134a was also referred. That work was however focused on high cooling capacities, which means that the R134a expander will have much higher mass flow than the CO{sub 2} expander in this study. The literature survey on fluid expansion and nucleation showed that the critical radius is important in nucleation. The critical radius is dependent on the surface tension and the difference between the liquid saturation pressure and the local pressure. For the current study, understanding of nucleation will be important in order to understand the function of the nozzle. Finally some models for critical flow were presented (author) (ml)

Analysis of turbine-grid interaction of grid-connected wind turbine using HHT

Science.gov (United States)

Chen, A.; Wu, W.; Miao, J.; Xie, D.

2018-05-01

This paper processes the output power of the grid-connected wind turbine with the denoising and extracting method based on Hilbert Huang transform (HHT) to discuss the turbine-grid interaction. At first, the detailed Empirical Mode Decomposition (EMD) and the Hilbert Transform (HT) are introduced. Then, on the premise of decomposing the output power of the grid-connected wind turbine into a series of Intrinsic Mode Functions (IMFs), energy ratio and power volatility are calculated to detect the unessential components. Meanwhile, combined with vibration function of turbine-grid interaction, data fitting of instantaneous amplitude and phase of each IMF is implemented to extract characteristic parameters of different interactions. Finally, utilizing measured data of actual parallel-operated wind turbines in China, this work accurately obtains the characteristic parameters of turbine-grid interaction of grid-connected wind turbine.

Generic vortex modelling for horizontal-axis wind turbines

Energy Technology Data Exchange (ETDEWEB)

Wood, D.H.

2002-07-01

This paper describes a generic free-wake calculation of wind turbine wakes. The expanding, helical, tip vortices are represented by a sequence of straight segments, the blades are modelled as lines of constant bound vorticity, and the hub vortices lie along the axis of rotation. It is shown that this model is consistent with the one-dimensional analysis that leads to the Lanchester-Betz limit, in that the velocity in the far-wake is uniform with radius. Particular attention is paid to turbines operating above the Lanchester-Betz limit. It is shown that the usual relationship between the velocity through the blades and in the far-wake breaks down when there is significant wake expansion, and an empirical modification to that relation is presented. For highly expanding wakes, the dynamics of the turbine depend sensitively on the behaviour of the tip vortices. (author)

Small Wind Turbine Technology Assessment; Estado del Arte de la Tecnologia de Pequeos Aerogeneradores

Energy Technology Data Exchange (ETDEWEB)

Avia Aranda, F; Cruz Cruz, I [CIEMAT. Madrid (Spain)

1999-03-01

The result of the study carried out under the scope of the ATYCA project Test Plant of Wind Systems for Isolated Applications, about the state of art of the small wind turbine technology (wind turbines with swept area smaller than 40 m``2) is presented. The study analyzes the collected information on 60 models of wind turbines from 23 manufactures in the worldwide market. Data from Chinese manufacturers, that have a large participation in the total number of small turbines in operation, are not included, due to the unavailability of the technical information. (Author) 15 refs.

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E [Teollisuuden Voima Oy, Olkiluoto (Finland)

1999-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E. [Teollisuuden Voima Oy, Olkiluoto (Finland)

1998-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

Corporate social responsibility and hospitals: US theory, Japanese experiences, and lessons for other countries.

Science.gov (United States)

Takahashi, Toshiro; Ellen, Moriah; Brown, Adalsteinn

2013-01-01

This paper examines the role that corporate social responsibility can play in advancing hospital management. Corporate social responsibility is the integration of social and environmental concerns within business operations. The authors discuss how corporate social responsibility can help hospitals and provide suggestions to hospitals in deciding which corporate social responsibility initiatives to pursue.

Conceptual design of a commercial supercritical CO2 gas turbine for the fast reactor power plant

International Nuclear Information System (INIS)

Muto, Y.; Ishizuka, T.; Aritomi, M.

2010-01-01

This paper describes the design results of turbine and compressors of a supercritical CO 2 gas turbine connected to the commercial sodium cooled fast reactor. Power output of the gas turbine-generator system is 750 MWe. The system consists of turbine, main compressor and bypass compressor. Turbine is axial flow type. Both axial flow and centrifugal compressors were designed. Aerodynamic, blade strength and rotor dynamics calculations were conducted. Achievable adiabatic efficiencies and cross-sectional structures are given. For this design conditions, the axial flow compressor is superior to the centrifugal compressor due to the large mass flow rate. (authors)

Investigation of the interactions between wind turbines and radio systems aimed at establishing co-siting guidelines. Phase 1: Introduction and modelling of wind turbine scatter, appendices E, F and G

International Nuclear Information System (INIS)

Dabis, H.S.; Chignell, R.J.

1997-01-01

The potential for wind turbines to interfere with radio systems can be a source of conflict between radio operators and the wind energy community. In this report, the problem of accurately predicting the effects of wind turbines on radio systems with the aim of establishing guidelines for their installation is investigated. Initially models for the scatter mechanisms that occur at the wind turbine are developed. These models predict the wind turbine radar cross section and the modulation effects due to the rotation of the blades. Initial validation of these models is established by comparing the predicted results with a set of measurements obtained from experiments performed on a 20:1 scale model wind turbine. It is shown that generally these results agree well. These results are then used in the guideline formulation to compute, for specific radio systems, regions where wind turbines cannot be installed. Examples using realistic parameters for various radio systems are presented. Further validation of the derived models is required. (author)

Wind Turbine Tribology Seminar - A Recap

Energy Technology Data Exchange (ETDEWEB)

Errichello, R.; Sheng, S.; Keller, J.; Greco, A.

2012-02-01

Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication, and wear. It is an important phenomenon that not only impacts the design and operation of wind turbine gearboxes, but also their subsequent maintenance requirements and overall reliability. With the major growth and increasing dependency on renewable energy, mechanical reliability is an extremely important issue. The Wind Turbine Tribology Seminar was convened to explore the state-of-the-art in wind turbine tribology and lubricant technologies, raise industry awareness of a very complex topic, present the science behind each technology, and identify possible R&D areas. To understand the background of work that had already been accomplished, and to consolidate some level of collective understanding of tribology by acknowledged experts, the National Renewable Energy Laboratory (NREL), Argonne National Laboratory (ANL), and the U.S. Department of Energy (DOE) hosted a wind turbine tribology seminar. It was held at the Renaissance Boulder Flatiron Hotel in Broomfield, Colorado on November 15-17, 2011. This report is a summary of the content and conclusions. The presentations given at the meeting can be downloaded. Interested readers who were not at the meeting may wish to consult the detailed publications listed in the bibliography section, obtain the cited articles in the public domain, or contact the authors directly.

On the performance simulation of inter-stage turbine reheat

International Nuclear Information System (INIS)

Pellegrini, Alvise; Nikolaidis, Theoklis; Pachidis, Vassilios; Köhler, Stephan

2017-01-01

Highlights: • An innovative gas turbine performance simulation methodology is proposed. • It allows to perform DP and OD performance calculations for complex engines layouts. • It is essential for inter-turbine reheat (ITR) engine performance calculation. • A detailed description is provided for fast and flexible implementation. • The methodology is successfully verified against a commercial closed-source software. - Abstract: Several authors have suggested the implementation of reheat in high By-Pass Ratio (BPR) aero engines, to improve engine performance. In contrast to military afterburning, civil aero engines would aim at reducing Specific Fuel Consumption (SFC) by introducing ‘Inter-stage Turbine Reheat’ (ITR). To maximise benefits, the second combustor should be placed at an early stage of the expansion process, e.g. between the first and second High-Pressure Turbine (HPT) stages. The aforementioned cycle design requires the accurate simulation of two or more turbine stages on the same shaft. The Design Point (DP) performance can be easily evaluated by defining a Turbine Work Split (TWS) ratio between the turbine stages. However, the performance simulation of Off-Design (OD) operating points requires the calculation of the TWS parameter for every OD step, by taking into account the thermodynamic behaviour of each turbine stage, represented by their respective maps. No analytical solution of the aforementioned problem is currently available in the public domain. This paper presents an analytical methodology by which ITR can be simulated at DP and OD. Results show excellent agreement with a commercial, closed-source performance code; discrepancies range from 0% to 3.48%, and are ascribed to the different gas models implemented in the codes.

Author Details

African Journals Online (AJOL)

Ijaiya, H. Vol 3, No 1 (2014) - Articles Challenges of corporate social responsibility in the Niger delta region of Nigeria Abstract PDF. ISSN: 2467-8392. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

Author Details

African Journals Online (AJOL)

Krüger, JGA. Vol 13, No 3 (2010) - Articles Restructuring of Insolvent Corporations in Canada Abstract PDF. ISSN: 1727-3781. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News.

Author Details

African Journals Online (AJOL)

Amkpa, Samuel Arubam. Vol 2, No 2 (2011) - Articles Effects of corporate culture on the implementation of automation in libraries of federal universities in the North–East Zone of Nigeria Abstract PDF. ISSN: 2360-994X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

Modeling and control of PMSG-based variable-speed wind turbine

Energy Technology Data Exchange (ETDEWEB)

Kim, Hong-Woo; Ko, Hee-Sang [Wind Energy Research Center, Korea Institute of Energy Research, Yuseong-gu Jang-Dong 71-2,305-343 Daejeon (Korea); Kim, Sung-Soo [Chungbuk National University (Korea)

2010-01-15

This paper presents a control scheme of a variable-speed wind turbine with a permanent-magnetic synchronous generator (PMSG) and full-scale back-to-back voltage source converter. A comprehensive dynamical model of the PMSG wind turbine and its control scheme is presented. The control scheme comprises both the wind-turbine control itself and the power-converter control. In addition, since the PMSG wind turbine is able to support actively the grid due to its capability to control independently active and reactive power production to the imposed set-values with taking into account its operating state and limits, this paper presents the supervisory reactive power control scheme in order to regulate/contribute the voltage at a remote location. The ability of the control scheme is assessed and discussed by means of simulations, based on a candidate site of the offshore wind farm in Jeju, Korea. (author)

Study for Determining the Testing Condition of Compressor and Turbine System

International Nuclear Information System (INIS)

Sri Sudadiyo

2009-01-01

Study for Determining the Testing Condition of Compressor and Turbine System. From the viewpoint of energy system and environment, the concept for nuclear reactors of the generation IV have good potential for electricity and heat generation devices in producing hydrogen. These gas cooled nuclear reactors employ turbine cycle in transferring the heat. To analyses that coolant system, it is proposed a model of compressor and turbine system with power 3 kW. The used working fluid was hydrogen that be burnt with air within combustion chamber, then be expanded through a turbine for getting shaft work that will be used in driving compressor and generator. This study is aimed to determine the optimum testing conditions of gas turbine system. The used method is by applying the balance equations of energy, mass, and momentum. Gas turbine and compressor were placed at the single shaft, in which it was about 55 percent of power output for running the compressor. Under the testing condition for the speed of 20305 rpm, it was obtained thermal efficiency of the turbine cycle approximate 18 % (equal to the Carnot efficiency ratio 65 %), so that it is properly developed for the development of nuclear power installation in supporting the electricity energy demand and it will be very promising for the future facility. (author)

Probability of Corporal Punishment: Lack of Resources and Vulnerable Students

Science.gov (United States)

Han, Seunghee

2011-01-01

The author examined corporal punishment practices in the United States based on data from 362 public school principals where corporal punishment is available. Results from multiple regression analyses show that schools with multiple student violence prevention programs and teacher training programs had fewer possibilities of use corporal…

Corporate-Academic Partnerships: Creating a Win-Win in the Classroom

Science.gov (United States)

Deeter-Schmelz, Dawn Reneé

2015-01-01

For instructors seeking ways to provide sales students with experiential learning projects designed to develop and enhance skills in an authentic environment, corporate-academic partnerships offer a viable option. The author describes a unique and innovative corporate-academic integrated project, including course content, role plays, and corporate…

The role of corporate governance in preventing economic crises

Directory of Open Access Journals (Sweden)

Marek Matuszak

2012-12-01

Full Text Available The author discusses the role of corporate governance in preventing economic crises, both in the enterprise and in the economy. The article is based on the research of literature. It presents the concept of corporate governance, crisis, and factors affecting the effectiveness of the supervisory board. In the final part, it presents the principles of effective corporate governance established by the OECD, and the recommendations for redefining of the rules resulting from the analysis of experiences of the last global financial crisis.

Wind turbine power stations

International Nuclear Information System (INIS)

Anon.

1992-11-01

The Countryside Council for Wales (CCW's) policy on wind turbine power stations needs to be read in the context of CCW's document Energy:Policy and perspectives for the Welsh countryside. This identifies four levels of action aimed at reducing emission of gases which contribute towards the risk of global warming and gases which cause acid deposition. These are: the need for investment in energy efficiency; the need for investment in conventional power generation in order to meet the highest environmental standards; the need for investment in renewable energy; and the need to use land use transportation policies and decisions to ensure energy efficiency and energy conservation. CCW views wind turbine power stations, along with other renewable energy systems, within this framework. CCW's policy is to welcome the exploitation of renewable energy sources as an element in a complete and environmentally sensitive energy policy, subject to the Environmental Assessment of individual schemes and monitoring of the long-term impact of the various technologies involved. (Author)

Simulation model of a wind turbine pitch controller for grid frequency stabilisation

Energy Technology Data Exchange (ETDEWEB)

Jauch, Clemens; Cronin, Tom

2005-06-15

This paper describes a pitch angle controller that enables an active-stall wind turbine to dampen actively grid frequency oscillations. This builds on previous work in the area of the transient stability control of active-stall turbines. The phenomenon of grid frequency oscillations is explained briefly and then the task for the wind turbine controller defined. The pitch controller that acts as a grid frequency stabiliser is explained in terms of its layout, control sequence and parameters. Finally, a transient fault situation with subsequent grid frequency oscillations is simulated and it is shown how the grid frequency stabiliser works. The performance of the controller is discussed and the conclusion is drawn that grid frequency stabilisation with an active-stall turbine is possible under certain conditions. (Author)

Incorporating Corporate Social Responsibility and Sustainability into a Business Course: A Shared Experience

Science.gov (United States)

Persons, Obeua

2012-01-01

The author discusses how corporate social responsibility (CSR) and sustainability were incorporated into a business course by using 4 assignments, a project with a CSR question, 7 ethics cases, and 17 ethics scenarios tied to a corporate code of ethics. The author also discusses student evaluation of CSR learning experience, strengths and…

Urban small wind turbine applications for reducing GHC emissions

International Nuclear Information System (INIS)

Tullis, S.

2009-01-01

'Full text:' There are advantages to power generation at or near the points of consumption and this is still true for low carbon sustainable power sources, including wind. Consequently, there is interest in wind power generation in cities and suburbs. The potential now exists for realistic power small-scale generation in building mounted turbines. This presentation provides the benefits and obstacles to their use, as well as details of such turbines and the design and operations requirements for them. The main issues associated with locating turbines in cities and suburbs are: the highly turbulent, unsteady wind in the urban/suburban environment produces lower power outputs; vibration is a large concern on mounting turbines on buildings, and safety (turbine failure or even just ice shedding) with pedestrians below. Past and current thinking has just been straightforward in that it is not worth it, and the previous attempts at simply mounting small-scale turbines on rooftops has done more harm than good to the reputation of the small wind, and wind in general, industries. Recently there has been a reconsideration of urban small wind led by reputable companies such as Quiet Revolution (UK), Turby (NL) and Cleanfield (Canada) combined with academic research. A common feature of all of these companies is the use of vertical axis turbines (VAWTs) to help deal with the highly turbulent, unsteady urban winds. Large-scale VAWTs enjoyed a brief flurry of interest in the 1970s and 80s with large amounts of research done at Sandia and NRC in Canada. Vibration and fatigue in the large-scale turbines were among the issues that led to their decline. These, particularly vibration, remain issues for small-scale turbines, but there are some mitigating strategies available. These are now leading to the development of reputable, practical and reliable turbines that can become part of the urban/suburban environment. (author)

Antecedents and benefits of corporate citizenship : an investigation of French businesses

NARCIS (Netherlands)

Maignan, I.S.J.; Ferrell, O.C.

The authors first propose a conceptualization and operationalization of corporate citizenship. Then, they present an empirical study conducted among French businesses aimed at: (1) understanding whether an organization's culture affects its likelihood of engaging in corporate citizenship and (2)

76 FR 61342 - Foreign-Trade Zone 72 Temporary/Interim Manufacturing Authority Brevini Wind USA, Inc., (Wind...

Science.gov (United States)

2011-10-04

... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket T-3-2011] Foreign-Trade Zone 72 Temporary/Interim Manufacturing Authority Brevini Wind USA, Inc., (Wind Turbine Gear Boxes); Notice of Approval On... manufacturing (T/IM) authority, on behalf of Brevini Wind USA, Inc., to manufacture wind turbine gear boxes...

The VGOT Darrieus wind turbine

Energy Technology Data Exchange (ETDEWEB)

Ponta, F.L.; Otero, A.D.; Lago, L. [University of Buenos Aires (Argentina). College of Engineering

2004-07-01

We present the actual state of development of a non-conventional new vertical-axis wind turbine. The concepts introduced here involve the constructive aspects of variable-geometry oval-trajectory (VGOT) Darrieus wind turbines. The key feature of a VGOT machine is that each blade slides over rails mounted on a wagon instead of rotating around a central vertical axis. Each wagon contains its own electrical generation system coupled to the power-wheels and the electricity is collected by a classical third rail system. The VGOT concept allows increasing the area swept by the blades, and hence the power output of the installation, without the structural problems and the low rotational speed associated with a classical Darrieus rotor of large diameter. We also propose some engineering solutions for the VGOT design and present a brief economic analysis of the feasibility of the project. (author)

CANDU combined cycles featuring gas-turbine engines

International Nuclear Information System (INIS)

Vecchiarelli, J.; Choy, E.; Peryoga, Y.; Aryono, N.A.

1998-01-01

thermodynamic evaluation of various CANDU gas-turbine combined cycles. For the evaluation, a minimal number and size of gas-turbine engines were considered, specifically, 4x50 MWe (based on CANDU 6). With this set of gas turbines, it is calculated that a relatively high level of reliability of class IV power restoration can be attained. The results from the GateCycle analysis indicate that certain CANDU combined cycles can generate over 940 MWe (net) with an overall thermal efficiency of up to 37% (which is about 4 percentage points higher than that of the current CANDU 6). Hence, the proposed concept may significantly enhance the competitiveness of future CANDU plants. This is especially important in light of: (a) advancements in combined-cycle technology and (b) recent studies on the thermal coupling of gas turbines with future light water reactors. (author)

Innovation activity of corporations in emerging economies

Directory of Open Access Journals (Sweden)

Soboleva Ekaterina N.

2016-01-01

Full Text Available The paper considers macro parameters of corporation innovation activity in the BRICS countries. The authors determine transnational corporation behavior strategies in the context of creating and transferring new knowledge, where developed countries (the USA, European countries and Japan play an important role and take a leading position in this process. Companies from emerging economies focus on using and adopting innovations. The reason for this is that knowledge “is coded” specifically, consequently the participants of its exchange have to be in similar intellectual space. Nevertheless, the market-leading corporations from the BRICS countries join the world chains of innovation creation, building their networks to satisfy their branches needs concerning technological decisions and personnel training

Corporate Governance, between Classicism and Modernism

Directory of Open Access Journals (Sweden)

Niculae Feleaga

2006-07-01

Full Text Available Corporate governance represents a complex concept, being an assembly of mechanisms used to set order into company leaders’ decisions. The rules of corporate governance are the ones keeping the score between the economic entity’s leaders and the third parties who invest their resources in the business. The corporate governance issue did not appear by hazard, but it resulted from the necessity to reconcile many business interests within a company (sometimes contradictory issues, especially the ones between the shareholders and the business leaders. The Anglo-Saxon view, in which the business power is given to the Equity items, is traditionally opposing the European (continental vision, where focus is being made on the Stakeholders’ interests. Within a world dominated by globalization issues, and where the financial markets evolve on an exponential curve, the two above mentioned corporate governance models ought to interact one with another in a constructive manner. Even if the corporate governance concept has developed recently, mainly during the last 25 years, its origins are rooted way back into the world history. Corporate governance is organically linked to the capitalist society and economy. After the 11 September attacks, many of the contemporary authors had the tendency to declare this date as the beginning of the XXIst century. If the ‘Twin Towers’ had hosted companies like: Tyco, Enron, Xerox, Wordcom and many other Stock Exchange-quoted businesses, it is likely that the financial crisis from 2000-2002 would have been differently perceived, and corporate governance had developed slightly different evolutionary mechanisms. A scientific article, based on the comparison between the classical and modern corporate governance experiences, would therefore suit the Romanian business environment.

Corporate Governance, between Classicism and Modernism

Directory of Open Access Journals (Sweden)

Cristina Vasile

2006-09-01

Full Text Available Corporate governance represents a complex concept, being an assembly of mechanisms used to set order into company leaders’ decisions. The rules of corporate governance are the ones keeping the score between the economic entity’s leaders and the third parties who invest their resources in the business. The corporate governance issue did not appear by hazard, but it resulted from the necessity to reconcile many business interests within a company (sometimes contradictory issues, especially the ones between the shareholders and the business leaders. The Anglo-Saxon view, in which the business power is given to the Equity items, is traditionally opposing the European (continental vision, where focus is being made on the Stakeholders’ interests. Within a world dominated by globalization issues, and where the financial markets evolve on an exponential curve, the two above mentioned corporate governance models ought to interact one with another in a constructive manner. Even if the corporate governance concept has developed recently, mainly during the last 25 years, its origins are rooted way back into the world history. Corporate governance is organically linked to the capitalist society and economy. After the 11 September attacks, many of the contemporary authors had the tendency to declare this date as the beginning of the XXIst century. If the ‘Twin Towers’ had hosted companies like: Tyco, Enron, Xerox, Wordcom and many other Stock Exchange-quoted businesses, it is likely that the financial crisis from 2000-2002 would have been differently perceived, and corporate governance had developed slightly different evolutionary mechanisms. A scientific article, based on the comparison between the classical and modern corporate governance experiences, would therefore suit the Romanian business environment.

Implementation of corporate governance principles in Romania

Directory of Open Access Journals (Sweden)

Ramona Iulia Țarțavulea (Dieaconescu

2014-12-01

Full Text Available The paper aims to conduct a study regarding the manner in which corporate governance principles are applied in Romania, in both public and private sector. In the first part of the paper, the corporate governance principles are presented as they are defined in Romania, in comparison with the main international sources of interest in the domain (OECD corporate governance principles, UE legal framework. The corporate governance (CG principles refer to issues regarding board composition, transparency of scope, objectives and policies; they define the relations between directors and managers, shareholders and stakeholders. The research methodology is based on both fundamental research and empirical study on the implementation of corporate governance principles in companies from Romania. The main instrument of research is a corporate governance index, calculated based on a framework proposed by the author. The corporate governance principles are transposed in criteria that compose the framework for the CG index. The results of the study consist of scores for each CG principles and calculation of CG index for seven companies selected from the public and private sector in Romania. The results are analyzed and discussed in order to formulate general and particular recommendations. The main conclusion of this study is that that a legal framework in the area of corporate governance regulation is needed in Romania. I consider that the main CG principles should be enforced by developing a mandatory legal framework.

Computational analysis of supercritical carbon dioxide flow around a turbine and compressor BLADE

International Nuclear Information System (INIS)

Kim, Tae W.; Kim, Nam H.; Suh, Kune Y.; Kim, Seung O.

2007-01-01

The turbine and compressor isentropic efficiencies are one of the major parameters affecting the overall Brayton cycle efficiency. Thus, the optimal turbine and compressor design should contribute to the economics of future nuclear fission and fusion energy systems. A computation analysis was performed utilizing CFX for the supercritical carbon dioxide (SCO 2 ) flow around a turbine and compressor blade to check on the potential efficiency of the turbine and compressor which determine such basic design values as the blade (or impeller) and nozzle (or diffuser) types, blade height, and minimum and maximum radii of the hub and tip. Basic design values of the turbine and compressor blades based on the Argonne National Laboratory (ANL) design code was generated by ANSYS BladeGen TM . The boundary conditions were based on the KALIMER-600 secondary loop. Optimal SCO 2 turbine and compressor blades were developed for high efficiency of 90% by the computational analysis. (author)

The Relationship of Corporate Governance, Corporate Social Responsibilities and Corporate Financial Performance in One Continuum

OpenAIRE

Murwaningsari, Etty

2010-01-01

This study aims to identify the impact of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance.It examines 126 manufacturing companies listed at the Indonesian Stock Exchange (IDX) and have issued audited financial statements for 2006. The statistical method used to test the hypothesis is Path Analysis. The main results suggest that Good Corporate Governance has effects on both Corpor...

Potential of wind turbines to elicit seizures under various meteorological conditions.

Science.gov (United States)

Smedley, Andrew R D; Webb, Ann R; Wilkins, Arnold J

2010-07-01

To determine the potential risk of epileptic seizures from wind turbine shadow flicker under various meteorologic conditions. We extend a previous model to include attenuation of sunlight by the atmosphere using the libradtran radiative transfer code. Under conditions in which observers look toward the horizon with their eyes open we find that there is risk when the observer is closer than 1.2 times the total turbine height when on land, and 2.8 times the total turbine height in marine environments, the risk limited by the size of the image of the sun's disc on the retina. When looking at the ground, where the shadow of the blade is cast, observers are at risk only when at a distance turbines rotate at a rate below that at which the flicker is likely to present a risk, although there is a risk from smaller turbines that interrupt sunlight more than three times per second. For the scenarios considered, we find the risk is negligible at a distance more than about nine times the maximum height reached by the turbine blade, a distance similar to that in guidance from the United Kingdom planning authorities.

76 FR 28418 - Voluntary Termination of Foreign-Trade Subzone 33C; Sony Corporation of America, Mt. Pleasant, PA

Science.gov (United States)

2011-05-17

...-Trade Subzone 33C; Sony Corporation of America, Mt. Pleasant, PA Pursuant to the authority granted in... Industrial Development Corporation of Southwestern Pennsylvania, (grantee of FTZ 33) authorizing the establishment of Foreign-Trade Subzone 33C at the Sony Corporation of America plant in Mt. Pleasant...

An assessment of the potential for business use of wind turbines on farms in Scotland

International Nuclear Information System (INIS)

Hunter, A.G.M.; Graham, R.; Morgan, O.W.

1998-01-01

High wind speeds on farms in Scotland, coupled with on-site demands for electricity, suggest there is potential for installing single wind turbines on these farms to generate electricity. The benefit of avoided costs for on-site supplies will help to lower the effective generating costs of surplus electricity for sale. Using a sensitivity analysis to examine a range of parameter settings for financial costs, wind speeds, and farm grants, it is shown that a turbine can be viable on a farm. The key to viability is to have correct and accurate matching between turbine and farm business, there being a place for both large turbines and small turbines under separate circumstances. There are scenarios where a wind turbine is viable on half the farms in Scotland. (Author)

Design and construction of a simple blade pitch measurement system for small wind turbines

Energy Technology Data Exchange (ETDEWEB)

Whale, Jonathan [Research Institute of Sustainable Energy, Murdoch University, Perth, WA 6150 (Australia)

2009-02-15

For small wind turbines to be reliable they must have in place good mechanisms to protect themselves against very high winds or sudden removal of load. One common protection method in small wind turbines is that of blade feathering. It is important that the blade feathering mechanism of a small wind turbine is tested before the turbine is installed in the field. This paper presents a simple system for monitoring the blade feathering of a turbine with an overall component cost that small wind turbine manufacturers can afford. The Blade Pitch Measurement System (BPMS) has been designed and constructed by the Research Institute of Sustainable Energy (RISE) and aids small wind turbine manufacturers in testing and optimising the settings of the blade feathering mechanisms on their machines. The results show that the BPMS was successful in recording the behaviour of the blade feathering mechanism in field trials with a 20 kW and a 30 kW wind turbine. The BPMS displays significant potential as an effective, inexpensive system for small wind turbine manufacturers to ensure the reliability of their pitch regulating over-speed protection mechanisms. (author)

The micro turbine: the MIT example; La micro turbine: l'exemple du MIT

Energy Technology Data Exchange (ETDEWEB)

Ribaud, Y. [Office National d' Etudes et de Recherches Aerospatiales (ONERA-DEFA), 92 - Chatillon (France)

2001-10-01

The micro turbine study began a few years ago at the MIT, with the participation of specialists from different fields. The purpose is the development of a MEMS (micro electro mechanical systems) based, 1 cm in diameter, micro gas turbine. Potential applications are devoted to micro drone propulsion, electric power generation for portable power sources in order to replace heavy Lithium batteries, satellite motorization, the surface distributed power for boundary suction on plane wings. The manufacturing constraints at such small scales lead to 2-D extruded shapes. The physical constraints stem from viscous effects and from limitations given by 2-D geometry. The time scales are generally shorter than for conventional machines. Otherwise the material properties are better at such length scales. Transposition from conventional turbomachinery laws is no more applicable and new design methods must be established. The present paper highlights the project progress and the technology breakthroughs. (author)

Gas turbines and operation of gas turbines 2011; Gasturbinen und Gasturbinenbetrieb 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Within the VGB Conference at 11th and 12th May, 2011 in Offenbach/Main (Federal Republic of Germany), the following lectures were held: (1) The future of high temperature gas turbines in power plants (Konrad Vogeler); (2) Development of reliable thermal barrier coatings for high-loaded turbine and combustor parts (Hans-Peter Bossmann); (3) CCPP Irsching 4 with gas turbine SGT5-8000H, on the way to 60 % CC efficiency (Willibald Fischer); (4) First test results of MAN's new 6 MW gas turbine (Markus Beukenberg); (5) Design characteristics and key thermodynamic parameters of the recuperated 4 MW solar turbines Mercury 50 gas turbines: - Economics and environmental feasibility, - operating experience in combined cycle applications with recuperation (Ulrich Stang); (6) Medium size gas turbines - OEM concept for continued reduction of life cycle costs (Vladimir Navrotsky); (7) Fracture mechanical analysis on fatigue failures of gas turbine components: - Root cause analysis - fracture mechanics - stress corrosion cracking - examples of failure analysis (Peter Verstraete); (8) The effectiveness of blade superalloy reheat treatment (Michael Wood); (9) An innovative combustion technology for high efficient gas turbines (Christian Oliver Paschereit); (10) Damping of thermo-acoustic vibrations in gas turbine combustion chambers (Sermed Sadig); (11) Alstom GT13E2 combustor upgrade for Vattenfalls Berlin Mitte combined heat and power plant (Klaus Doebbeling); (12) Optimisation of air inlet filtration for dust, rain and humidity (Heiko Manstein); (13) Life cycle cost reduction through high efficiency membrane based air intake filters (Helmut Krah); (14) Status and impact of national, European and international standardization on GT plants; GT standardizing status quo? (Gerd Weber); (15) Technical and thermodynamic aspects of compresssed air energy storage (Peter Radgen); (16) Requirements on the gas turbine in the course of time - intelligent OEM-concepts to ensure reliable

Wind Penetration with different wind turbine technologies in a weak grid

International Nuclear Information System (INIS)

Santos Fuentefria, Ariel; Castro Fernandez, Miguel A.; Martínez García, Antonio

2012-01-01

The insertion of wind energy into electric network may provoke stability problems due to stochastic character of wind. The variation in the wind causes voltage variation in the Point of Common Coupling (PCC). In a weakest system that variation is high. Another important factor is wind turbine technology. The use of grid-connected fixed speed wind generator introduces a great consumption of reactive power that can be compensated using different devices as capacitors bank or static var compensator (SVC or STATCOM). In the other hand the variable speed wind turbine have an electronic converter to control the reactive consumption to maintain the PCC voltage more stable. In this paper a comparison between the different types of wind turbines technology is show. It's analyzing the impact in wind power limit for different wind turbine technologies in a weak system. (author)

The condition monitoring system of turbine system components for nuclear power plants

International Nuclear Information System (INIS)

Ono, Shigetoshi

2013-01-01

The thermal and nuclear power plants have been imposed a stable supply of electricity. To certainly achieve this, we built the plant condition monitoring system based on the heat and mass balance calculation. If there are some performance changes on the turbine system components of their power plants, the heat and mass balance of the turbine system will change. This system has ability to detect the abnormal signs of their components by finding the changes of the heat and mass balance. Moreover we note that this system is built for steam turbine cycle operating with saturated steam conditions. (author)

Proceedings of a workshop on wind turbine noise

International Nuclear Information System (INIS)

Legerton, M.

1993-08-01

Noise generated by wind turbines is an environmental constraint on the exploitation of wind energy. It is a major consideration when seeking planning consent for the siting of machines due to the high population density in the UK and low levels of background noise in rural areas. There is, therefore, a need to identify the sources and characteristics of noise emitted by wind turbine generators, assess the influences on the propagation of noise through the atmosphere, and provide information to both wind farm developers and planning regulators on noise levels. A one day workshop was organised to provide an opportunity for experts in the field of wind turbine noise to present the current thoughts on the subject and so allow a wide ranging discussion of particular issues of interest. This volume contains the 10 papers presented at the workshop for each of which a separate abstract has been prepared. (author)

Effects of wind turbines on UHF television reception: field tests in Denmark, November 1991

International Nuclear Information System (INIS)

Wright, D.T.

1992-01-01

As a result of a planning application for a wind farm comprising 20 wind turbines at Tynewydd Farm, Gilfach Goch in Mid Glamorgan, it became necessary to produce a Report discussing any detrimental effects the proposal might have on UHF television reception. In order to make that Report as definitive as possible, it was decided to carry out field tests on the exact model of wind turbine to be used to Tynewydd. This required a field trip to Denmark, and the opportunity was taken to make measurements on two other models of turbine at the same time. This Report presents the analysis of the results for all three turbines. (Author)

Assessment of the Impacts of Green Mountain Power Corporation's Wind Power Facility on Breeding and Migrating Birds in Searsburg, Vermont: July 1996--July 1998

Energy Technology Data Exchange (ETDEWEB)

Kerlinger, P.

2002-03-01

A 6-megawatt, 11 turbine wind power development was constructed by Green Mountain Power Corporation in Searsburg, southern Vermont, in 1996. To determine whether birds were impacted, a series of modified BA (Before, After) studies was conducted before construction (1993-1996), during (1996), and after (1997) construction on the project site. The studies were designed to monitor changes in breeding bird community (species composition and abundance) on the site, examine the behavior and numbers of songbirds migrating at night over the site and hawks migrating over the site in daylight, and search for carcasses of birds that might have collided with the turbines.

Design and field operation of 1175 MW steam turbine for Ohi Nuclear Power Station

International Nuclear Information System (INIS)

Hirota, Yoshio; Nakagami, Yasuo; Fujii, Hisashi; Shibanai, Hirooki.

1980-01-01

Two 1175 MW steam turbine and generator units have been successfully in commercial operation since March 1979 and December 1979 respectively at Ohi Nuclear Power Station of the Kansai Electric Power Company. Those units, the largest in their respective outputs in Japan, have also such remarkable design features as two-stage reheat, nozzle governing turbine, water cooled generator stator and turbine-driven feedwater pumps. This paper covers design features and some topics of various pre-operational tests of the above-mentioned units. (author)

Built-Environment Wind Turbine Roadmap

Energy Technology Data Exchange (ETDEWEB)

Smith, J.; Forsyth, T.; Sinclair, K.; Oteri, F.

2012-11-01

Although only a small contributor to total electricity production needs, built-environment wind turbines (BWTs) nonetheless have the potential to influence the public's consideration of renewable energy, and wind energy in particular. Higher population concentrations in urban environments offer greater opportunities for project visibility and an opportunity to acquaint large numbers of people to the advantages of wind projects on a larger scale. However, turbine failures will be equally visible and could have a negative effect on public perception of wind technology. This roadmap provides a framework for achieving the vision set forth by the attendees of the Built-Environment Wind Turbine Workshop on August 11 - 12, 2010, at the U.S. Department of Energy's National Renewable Energy Laboratory. The BWT roadmap outlines the stakeholder actions that could be taken to overcome the barriers identified. The actions are categorized as near-term (0 - 3 years), medium-term (4 - 7 years), and both near- and medium-term (requiring immediate to medium-term effort). To accomplish these actions, a strategic approach was developed that identifies two focus areas: understanding the built-environment wind resource and developing testing and design standards. The authors summarize the expertise and resources required in these areas.

Design optimization and analysis of vertical axis wind turbine blade

International Nuclear Information System (INIS)

Jarral, A.; Ali, M.; Sahir, M.H.

2013-01-01

Wind energy is clean and renwable source of energy and is also the world's fastest growing energy resource. Keeping in view power shortages and growing cost of energy, the low cost wind energy has become a primary solution. It is imperative that economies and individuals begin to conserve energy and focus on the production of energy from renewable sources. Present study describes a wind turbine blade designed with enhanced aerodynamic properties. Vertical axis turbine is chosen because of its easy installment, less noisy and having environmental friendly characteristics. Vertical axis wind turbines are thought to be ideal for installations where wind conditions are not consistent. The presented turbine blade is best suitable for roadsides where the rated speed due to vehicles is most /sup -1/ often 8 ms .To get an optimal shape design symmetrical profile NACA0025 has been considered which is then analyzed for stability and aerodynamic characteristics at optimal conditions using analysis tools ANSYS and CFD tools. (author)

Aseismic design of turbine houses of nuclear power plants

International Nuclear Information System (INIS)

Danisch, R.; Labes, M.

1975-01-01

The turbine house does not belong to the safety-related parts of equipment of a nuclear power plant. A special protection against earthquakes is not demanded by the authorities as long as it is proven that safety-related parts of equipment will not be restricted in their function by a collaps of the turbine house. The degree of an aseismic design is largely up to the customer, who has to weigh the risk of costs and availability against the additional costs, that are necessary for the earthquake calculation and for constructive hardening. In comparison to the high-tuned turbine foundations as they are in use in the USA today, low-tuned turbine foundations as a result of helical-spring-support, which are constructed by the KWU exclusively, pose special problems with the aseismic design. This is discussed in the present report. The spring-supported mass constitutes about a quarter of the building-mass. For mechanical reasons the spring elements are chosen in such a way, that the turbine foundation has a natural frequency of approximately 3 Hz. Thus it remains within the same frequency range as the turbine house and within that very range which is particularly amplificated by an earthquake. It is therefore likely that resonance effects as well as oscillation annulment effects may occur. The standardized calculation methods for conventional buildings without safety function such as DIN 4149 (Germany) or SIA 162 (Switzerland) do not cover the oscillation conduct of such a complicate structure. One receives informations about possible relative displacements between the building and the turbine foundation (hammering-effect) and about the stresses on the turbine and other components only by dynamic calculation methods such as the time-history or the response-spectrum method

Tunoe Knob wind turbine array. Visualization and aesthetic evaluation

International Nuclear Information System (INIS)

1994-09-01

The aesthetic affects of locating a wind turbine array in the Danish coastal waters at Tunoe Knob between Tunoe and the Juttish east coast are discussed. The visualization project made use of a video film which analyzed the effect of the configurations of the wind turbine array on the coastal landscape as seen from a number viewpoints. A computer model illustrated the aesthetic effects of viewing the windmills as the viewer moves along the east coast of Jutland and across the sea towards the islands of Tunoe and Samsoe. The results should form the basis of the authorities' decision-making regarding the configuration of the wind turbine array. An account of the methods of visualization and a description of the visualization methods, in addition to the criteria on which the choice of the configuration was based are given. The chosen configuration is visualized, from points that are near and far from the wind turbine array, in the form of maps, diagrams and photographs of the sea and landscape. (AB)

CFD modeling of a vertical-axis wind turbine for efficiency improvement and climate change mitigation

International Nuclear Information System (INIS)

Ajedegba, J.O.; Rosen, M.A.; Naterer, G.F.; Tsang, E.

2009-01-01

Wind power can help mitigate climate change. Computational fluid dynamics (CFD) is used here to simulate and analyze the Zephyr vertical axis wind turbine and to assess how it reduces greenhouse gas emissions. Fluid flow through the turbine is simulated to predict its performance. A multiple reference frame model capability of CFD is used to express the turbine power output as a function of the wind free stream velocity and the rotor rotational speed. The results suggest the wind turbine could significantly reduce energy demand and greenhouse gas emissions in urban and rural settings relative to conventional power systems. (author)

Design of a Rankine cycle operating with a passive turbine multi fluid

Energy Technology Data Exchange (ETDEWEB)

Placco, Guilherme M., E-mail: guilhermeplacco@gmail.com [Instituto Tecnológico de Aeronáutica (ITA), São José dos Campos, SP (Brazil); Guimarães, Lamartine N.F., E-mail: guimarae@ieav.cta.br [Instituto de Estudo Avançados (CTA/IEAV), São José dos Campos, SP, (Brazil); Santos, Gabriela S. B., E-mail: siqueira.gsb@gmail.com [Universidade Paulista (UNIP), São José dos Campos, SP (Brazil)

2017-07-01

The Institute of Advanced Studies - IEAv, has been conducting a project called TERRA - 'Fast Advanced Reactors Technology', which aims to study the effects on the working of a Rankine cycle operating with a Multi Fluid Passive Turbine - TPMF. This turbine has the main characteristic operate bladeless using discs arranged in parallel along a rotating axis. After a thorough literature search, we have not found a previous operating Rankine cycle with this kind of turbine. Thus, the work presented here, began its development with few guidelines to follow. It will be presented, of a sucint way, of the design of the parts that makes up a Rankine cycle; the boundary conditions of the cycle; Data acquisition system; the development schedule; assembly of the components; some associated costs and project management. Experimental results thermal conduction through the cycle; the results of net power generated by the turbine and a comparison between thermal energy to mechanical energy in the turbine (efficiency curve). (author)

Design of a Rankine cycle operating with a passive turbine multi fluid

International Nuclear Information System (INIS)

Placco, Guilherme M.; Guimarães, Lamartine N.F.; Santos, Gabriela S. B.

2017-01-01

The Institute of Advanced Studies - IEAv, has been conducting a project called TERRA - 'Fast Advanced Reactors Technology', which aims to study the effects on the working of a Rankine cycle operating with a Multi Fluid Passive Turbine - TPMF. This turbine has the main characteristic operate bladeless using discs arranged in parallel along a rotating axis. After a thorough literature search, we have not found a previous operating Rankine cycle with this kind of turbine. Thus, the work presented here, began its development with few guidelines to follow. It will be presented, of a sucint way, of the design of the parts that makes up a Rankine cycle; the boundary conditions of the cycle; Data acquisition system; the development schedule; assembly of the components; some associated costs and project management. Experimental results thermal conduction through the cycle; the results of net power generated by the turbine and a comparison between thermal energy to mechanical energy in the turbine (efficiency curve). (author)

Simulation of airflow and aerodynamic forces acting on a commercial turbine ventilator

International Nuclear Information System (INIS)

Farahani, A.S.; Nor Mariah Adam; Khairol Anuar

2009-01-01

Full text: This study is concerned with performing simulation of airflow using Computational Fluid Dynamics (CFD) technique code name FLUENT so as to visualize the flow behavior around and within turbine ventilator in addition to determining the aerodynamic forces acting on turbine ventilator during operation and comparing the simulated results to the wind tunnel experiment. To achieve this, Realizable k-ε and RSM turbulence models are used by taking advantage of moving mesh method to simulate the rotation of turbine ventilator and the consequent results are obtained through the sequential process which ensures accuracy of the computations. The results demonstrated that, the RSM turbulence model shows the best performance on flow visualization and predicting the aerodynamic forces acting on a turbine ventilator. Results from this work would lead us to a noticeable increase in efficiency of future turbine ventilator by enhancing the shape of inner vanes, and redesign them using CFD technique. (author)

The nuclear power corporation's foreign exchange risk management research

International Nuclear Information System (INIS)

Zhang Yi

2012-01-01

To manage and control foreign exchange rate risk under the floating exchange rate system, historical simulation method of VaR model has been utilized to evaluate the nuclear power corporation's foreign exchange risk and the risk causation has been analyzed. Finally, the measure of enhancing the nuclear power corporation's foreign exchange rate risk management level has been exposed for sharing. (author)

Superconducting Wind Turbine Generators

Directory of Open Access Journals (Sweden)

Yunying Pan

2016-08-01

Full Text Available Wind energy is well known as a renewable energy because its clean and less polluted characteristic, which is the foundation of development modern wind electricity. To find more efficient wind turbine is the focus of scientists around the world. Compared from conventional wind turbines, superconducting wind turbine generators have advantages at zero resistance, smaller size and lighter weight. Superconducting wind turbine will inevitably become the main trends in this area. This paper intends to introduce the basic concept and principle of superconductivity, and compare form traditional wind turbine to obtain superiority, then to summary three proposed machine concept.While superconductivity have difficulty  in modern technology and we also have proposed some challenges in achieving superconducting wind turbine finally.

Pelton turbines

CERN Document Server

Zhang, Zhengji

2016-01-01

This book concerns the theoretical foundations of hydromechanics of Pelton turbines from the engineering viewpoint. For reference purposes, all relevant flow processes and hydraulic aspects in a Pelton turbine have been analyzed completely and systematically. The analyses especially include the quantification of all possible losses existing in the Pelton turbine and the indication of most available potential for further enhancing the system efficiency. As a guideline the book therefore supports further developments of Pelton turbines with regard to their hydraulic designs and optimizations. It is thus suitable for the development and design engineers as well as those working in the field of turbo machinery. Many laws described in the book can also be directly used to simplify aspects of computational fluid dynamics (CFD) or to develop new computational methods. The well-executed examples help better understand the related flow mechanics.

Wind Turbine Technologies

DEFF Research Database (Denmark)

Hansen, Anca Daniela

2017-01-01

, and with or without gearboxes, using the latest in power electronics, aerodynamics, and mechanical drive train designs [4]. The main differences between all wind turbine concepts developed over the years, concern their electrical design and control. Today, the wind turbines on the market mix and match a variety......, the design of wind turbines has changed from being convention driven to being optimized driven within the operating regime and market environment. Wind turbine designs have progressed from fixed speed, passive controlled and with drive trains with gearboxes, to become variable speed, active controlled......,6] and to implement modern control system strategies....

Investigation of potential extreme load reduction for a two-bladed upwind turbine with partial pitch

DEFF Research Database (Denmark)

Kim, Taeseong; Larsen, Torben J.; Yde, Anders

2015-01-01

This paper presents a wind turbine concept with an innovative design combining partial pitch with a two-bladed (PP-2B) turbine configuration. Special emphasis is on extreme load reduction during storm situations at standstill, but operational loads are also investigated. In order to compare...... loads are reduced by approximately 20% for the PP-2B and 18% for the PP-3B compared with the 3B turbine for the parked condition in a storm situation. Moreover, a huge potential of 60% is observed for the reduction of the extreme tower bottom bending moment for the PP-2B turbine, when the wind direction...... is from ±90° to the turbine, but this also requires that the turbine is parked in a T-configuration. © 2014 The Authors. Wind Energy published by John Wiley & Sons, Ltd....

Corporate Brand Trust as a Mediator in the Relationship between Consumer Perception of CSR, Corporate Hypocrisy, and Corporate Reputation

Directory of Open Access Journals (Sweden)

Hanna Kim

2015-03-01

Full Text Available The aim of this research is to investigate the relationship between consumer perception of Corporate Social Responsibility (CSR, corporate brand trust, corporate hypocrisy, and corporate reputation. Based on the one-to-one interview method using a structured questionnaire of 560 consumers in South Korea, the proposed model was estimated by structural equation modeling analysis. The model suggests that consumer perception of CSR influences consumer attitudes toward a corporation (i.e., perceived corporate hypocrisy and corporate reputation by developing corporate brand trust. This in turn further enhances corporate reputation while decreasing corporate hypocrisy. The findings of our study demonstrate that consumer perception of CSR is an antecedent to corporate brand trust, which fully mediates the relationship between consumer perception of CSR and corporate reputation. In addition, corporate brand trust has the role of partial mediator in the relationship between consumer perception of CSR and corporate hypocrisy. These results imply that to better understand the relationship between consumer perception of CSR and consumer attitudes toward a corporation, it is necessary to consider corporate brand trust as an important mediating variable. The theoretical and practical implications of this study are discussed, together with its limitations and potential for future research.

Corporate governance, ownership and control: A review of recent scholarly research

Directory of Open Access Journals (Sweden)

Alex Kostyuk

2018-01-01

Full Text Available This manuscript is aimed at highlighting the most recent trends in corporate governance, ownership and control based on the manuscripts presented at the international conference “Corporate Governance, Ownership and Control” that took place in Rome on February 27, 2018. We have also used reputable papers published in the relevant academic journals in the past to support the arguments stated by the authors of the papers, presented at the conference. This paper covers a wide range of corporate governance topics in corporate ownership and control toward corporate governance mechanisms, such as board of directors, the board diversity, directors’ remuneration, firm performance, auditing and accounting, etc. We saw a growing interest of researchers to widen the scope of their major research to link it to corporate ownership and control issues. Currently, corporate governance research follows two major routs: classical empirical corporate governance research and multidisciplinary research aimed at findings non-conventional methods to solution of existing problems.

Pilot scale testing of biomass feedstocks for use in gasification/gas turbine based power generation systems

Energy Technology Data Exchange (ETDEWEB)

Najewicz, D.J.; Furman, A.H. [General Electric Corporate Research and Development Center, Schenectady, NY (United States)

1993-12-31

A biomass gasification pilot program was performed at the GE Corporate Research and Development Center using two types of biomass feedstock. The object of the testing was to determine the properties of biomass product gas and its` suitability as a fuel for gas turbine based power generation cycles. The test program was sponsored by the State of Vermont, the US Environmental Protection Agency, the US Department of Energy and Winrock International/US Agency for International Development. Gasification of bagasse and wood chip feedstock was performed at a feed rate of approximately one ton per hour, using the Ge pressurized fixed bed gasifier and a single stage of cyclone particulate removal, operating at a temperature of 1,000 F. Both biomass feedstocks were found to gasify easily, and gasification capacity was limited by volumetric capacity of the fuel feed equipment. The biomass product gas was analyzed for chemical composition, particulate loading, fuel bound nitrogen levels, sulfur and alkali metal content. The results of the testing indicated the combustion characteristics of the biomass product gas are compatible with gas turbine combustor requirements. However, the particulate removal performance of the pilot facility single stage cyclone was found to be inadequate to meet turbine particulate contamination specifications. In addition, alkali metals found in biomass based fuels, which are known to cause corrosion of high temperature gas turbine components, were found to exceed allowable levels in the fuel gas. These alkali metal compounds are found in the particulate matter (at 1000 F) carried over from the gasifier, thus improved particulate removal technology, designed specifically for biomass particulate characteristics could meet the turbine requirements for both particulate and alkali loading. The paper will present the results of the biomass gasification testing and discuss the development needs in the area of gas clean-up and turbine combustion.

Corporate Social Responsibility of Multinational Oil Corporations to ...

African Journals Online (AJOL)

Corporate Social Responsibility of Multinational Oil Corporations to Host ... Exxon Mobil and Elf oil Nigeria Limited within their corporate-community relations strategy in the ... The paper concludes by exploring the implications for partnerships' ...

75 FR 71426 - North Community Turbines, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Science.gov (United States)

2010-11-23

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER11-2107-000] North Community Turbines, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... proceeding, of North Community Turbines, LLC's application for market-based rate authority, with an...

Design and field operation of 1175 MW steam turbine for Ohi Nuclear Power Station

International Nuclear Information System (INIS)

Hirota, Y.; Nakagami, Y.; Fujii, H.; Shibanai, H.

1980-01-01

Two 1,175 MW steam turbine and generator units have been successfully in commercial operation since March 1979 and December 1979 respectively at Ohi Nuclear Power Station of the Kansai Electric Power Company. Those units, the largest in their respective outputs in Japan, have also such remarkable design features as two-stage reheat, nozzle governing turbine, water cooled generator stator and turbine-driven feedwater pumps. This paper covers design features and some topics of various pre-operational tests of the above-mentioned units. (author)

Pitchcontrol of wind turbines using model free adaptivecontrol based on wind turbine code

DEFF Research Database (Denmark)

Zhang, Yunqian; Chen, Zhe; Cheng, Ming

2011-01-01

value is only based on I/O data of the wind turbine is identified and then the wind turbine system is replaced by a dynamic linear time-varying model. In order to verify the correctness and robustness of the proposed model free adaptive pitch controller, the wind turbine code FAST which can predict......As the wind turbine is a nonlinear high-order system, to achieve good pitch control performance, model free adaptive control (MFAC) approach which doesn't need the mathematical model of the wind turbine is adopted in the pitch control system in this paper. A pseudo gradient vector whose estimation...... the wind turbine loads and response in high accuracy is used. The results show that the controller produces good dynamic performance, good robustness and adaptability....

NRPB corporate plan

International Nuclear Information System (INIS)

Clarke, Roger

1995-01-01

As with all non-departmental public bodies, the National Radiological Protection Board is required to prepare a Corporate Plan each year. The Plan for 1995/1996 to 1999/2000 is now available as a Board report; extracts from the introductory section are given here. They deal with the Board's statutory duty to provide advice and conduct research and with its power to provide services, all in relation to ionising and non-ionising radiations. (author)

How Corporate Governance Affects Strategy of Corporations : - Lessons from Enron Corporation -

OpenAIRE

Ahmed, Hameed; Najam, Ali

2006-01-01

Corporate governance is a subject of academic and professional debate. It has and it will continue to be a topic under scrutiny for subsequent deliberations since there are many different research dimensions and contexts associated with it. However, it has been observed that the linkage between corporate governance and strategy of a corporation remains as an untapped area with considerable avenues of research. This paper tends to explore this linkage, using Enron scandal as backdrop. In the a...

Wind Turbines Support Techniques during Frequency Drops — Energy Utilization Comparison

Directory of Open Access Journals (Sweden)

Ayman B. Attya

2014-08-01

Full Text Available The supportive role of wind turbines during frequency drops is still not clear enough, although there are many proposed algorithms. Most of the offered techniques make the wind turbine deviates from optimum power generation operation to special operation modes, to guarantee the availability of reasonable power support, when the system suffers frequency deviations. This paper summarizes the most dominant support algorithms and derives wind turbine power curves for each one. It also conducts a comparison from the point of view of wasted energy, with respect to optimum power generation. The authors insure the advantage of a frequency support algorithm, they previously presented, as it achieved lower amounts of wasted energy. This analysis is performed in two locations that are promising candidates for hosting wind farms in Egypt. Additionally, two different types of wind turbines from two different manufacturers are integrated. Matlab and Simulink are the implemented simulation environments.

Turbine Imaging Technology Assessment

Energy Technology Data Exchange (ETDEWEB)

Moursund, Russell A.; Carlson, Thomas J.

2004-12-31

The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions.

Turbine Imaging Technology Assessment

International Nuclear Information System (INIS)

Moursund, Russell A.; Carlson, Thomas J.

2004-01-01

The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions

The European programme to develop the Wells air turbine for applications in wave energy

International Nuclear Information System (INIS)

White, P.R.S.

1996-01-01

The European Wave Energy Pilot Plants currently under construction are utilising Wells air turbines to convert oscillating pneumatic energy within the converters to unidirectional energy of rotation for direct coupling to electrical generators. The Wells turbine has also been proposed for future off shore wave energy converters (eg SEA CLAM). The European research programme was to produce Recommendations for selecting the most appropriate air turbine for a given wave power application. The work concentrated on collating existing work on the Wells turbine, and extending it to examine rotor aerodynamics, the effect and practicality of variable pitch rotor blades, the effect on performance of interaction with the converter, and the preparation of design guide lines. A comparison between the output of a Wells turbine and a conventional air turbine with rectifying valves when subjected to the same random reversing air flow was also conducted. This paper gives a brief outline of the programme of work, and concludes that at this stage of development the Wells turbine is the preferred choice of prime mover for pneumatic wave energy converters. (Author)

Wind Turbines Wake Aerodynamics

DEFF Research Database (Denmark)

Vermeer, L.; Sørensen, Jens Nørkær; Crespo, A.

2003-01-01

The aerodynamics of horizontal axis wind turbine wakes is studied. The contents is directed towards the physics of power extraction by wind turbines and reviews both the near and the far wake region. For the near wake, the survey is restricted to uniform, steady and parallel flow conditions......, thereby excluding wind shear, wind speed and rotor setting changes and yawed conditions. The emphasis is put on measurements in controlled conditions.For the far wake, the survey focusses on both single turbines and wind farm effects, and the experimental and numerical work are reviewed; the main interest...... is to study how the far wake decays downstream, in order to estimate the effect produced in downstream turbines.The article is further restricted to horizontal axis wind turbines and excludes all other types of turbines....

Thermal performance test for steam turbine of nuclear power plants

International Nuclear Information System (INIS)

Bu Yubing; Xu Zongfu; Wang Shiyong

2014-01-01

Through study of steam turbine thermal performance test of CPR1000 nuclear power plant, we solve the enthalpy calculation problems of the steam turbine in wet steam zone using heat balance method which can help to figure out the real overall heat balance diagram for the first time, and we develop a useful software for thermal heat balance calculation. Ling'ao phase II as an example, this paper includes test instrument layout, system isolation, risk control, data acquisition, wetness measurement, heat balance calculation, etc. (authors)

Corporate identity as a factor of corporate security

OpenAIRE

Perelygina, Elena

2011-01-01

Forming-up of the corporate identity is based on cognitive, affective and conative elements of corporate culture. The group as an entity choosing goals and values ensures a certain response to standards and values of corporate culture within the parameters of its social responsibility. Corporate security as security of community and cooperation acts as a form of organizational and ethical approach to developing socially responsible attitude of government and business.

Gas turbine modular helium reactor in cogeneration

International Nuclear Information System (INIS)

Leon de los Santos, G.

2009-10-01

This work carries out the thermal evaluation from the conversion of nuclear energy to electric power and process heat, through to implement an outline gas turbine modular helium reactor in cogeneration. Modeling and simulating with software Thermo flex of Thermo flow the performance parameters, based on a nuclear power plant constituted by an helium cooled reactor and helium gas turbine with three compression stages, two of inter cooling and one regeneration stage; more four heat recovery process, generating two pressure levels of overheat vapor, a pressure level of saturated vapor and one of hot water, with energetic characteristics to be able to give supply to a very wide gamma of industrial processes. Obtaining a relationship heat electricity of 0.52 and efficiency of net cogeneration of 54.28%, 70.2 MW net electric, 36.6 MW net thermal with 35% of condensed return to 30 C; for a supplied power by reactor of 196.7 MW; and with conditions in advanced gas turbine of 850 C and 7.06 Mpa, assembly in a shaft, inter cooling and heat recovery in cogeneration. (Author)

Effect of size and concentration of silt particles on erosion of Pelton turbine buckets

Energy Technology Data Exchange (ETDEWEB)

Padhy, M.K.; Saini, R.P. [Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee (India)

2009-10-15

Erosive wear of hydro turbine runners depends upon different parameters such as size, hardness and concentration of silt particles, velocity of flow, properties of the base material of the turbine components and operating hours of the turbine. Various researchers have conducted experiments to study the effect of these parameters on erosive wear. Most of these experiments were on small-size samples at different types of test rigs to simulate the flow conditions in turbines, however actual flow conditions and the phenomenon of erosive wear are too complex to simulate. Under the present study, effect of these parameters on erosion in actual conditions has been investigated experimentally. An extensive experimental study has been carried out on a small scale Pelton turbine. Based on the experimental data collected for different parameters, correlations have been developed for wear rate of Pelton turbine buckets as a function of critical parameters, i.e., size and concentration of silt particles and jet velocity. (author)

A new corporate governance

Directory of Open Access Journals (Sweden)

Ion Bucur

2015-12-01

Full Text Available The issue of corporate governance has become increasingly important as globalisation has begun to accelerate and the economic and financial turmoil have intensified. Post-crisis context has imposed the need to expand the prospects for analysis over governance and companies, as well as the need to identify new ways of administration and resource management. From this perspective, the author aims to highlight the conditions, factors and events that have generated profound changes within the business environment, while the analysis is focusing on contemporary changes in the systems of corporate governance and economic mutations, especially in terms of the companies. The establishment of new governance rules is demanding a theoretical approach based on new methodological requirements which are needed to reform theoretical foundations and to promote creative and effective shapes and governance systems.

75 FR 71425 - North Wind Turbines, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Science.gov (United States)

2010-11-23

... proceeding, of North Wind Turbines, LLC's application for market-based rate authority, with an accompanying... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER11-2108-000] North Wind Turbines, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for Blanket...

Aero-hydro-elastic simulation platform for wave energy systems and floating wind turbines

Energy Technology Data Exchange (ETDEWEB)

Kallesoee, B.S.

2011-01-15

This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world's first combined wave and wind energy platform. The floating energy conversion platform, Poseidon, is owned and operated by Floating Power Plant A/S. The platform has been operating for two test periods; one period where it was operating as a wave energy conversion platform only and one period where the three turbines was mounted and the platform operated as a combined wind and wave energy platform. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the first test period has been used for determine if the turbine could be mounted on the platform. Preliminary analysis of data from the second test period indicates that the platform is suitable as wind turbine foundation and that the turbines reduce the platform motion. (Author)

Corporate Identity as a Factor of Corporate Security

Directory of Open Access Journals (Sweden)

Elena B. Perelygina

2011-01-01

Full Text Available Forming-upof the corporate identity is based on cognitive, affective and conative elements of corporate culture. The group as an entity choosing goals and values ensures a certain response to standards and values of corporate culture within the parameters of its social responsibility. Corporate security as security of community and cooperation acts as a form of organizational and ethical approach to developing socially responsible attitude of government and business.

Performance of nano-hydraulic turbine utilizing waterfalls

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Toshihiko; Iio, Shouichiro; Tatsuno, Kenji [Faculty of Engineering, Shinshu University, 4-17-1 Wakasato, Nagano, 380-8553 (Japan)

2010-01-15

The aim of this investigation was to develop an environmentally friendly nano-hydraulic turbine utilizing waterfalls. A model of an impulse type hydraulic turbine constructed and tested with an indoor type waterfall to arrive at an optimum installation condition. Effects of an installation parameter, namely distance between the rotor and the waterfall on the power performance were studied. The flow field around the rotor was examined visually to clarify influences of installation conditions on the flow field. The flow visualization showed differences of flow pattern around the rotor by the change of flow rate and rotational speed of the rotor. From this study it was found that the power performances of the rotor were changed with the distance between the rotor and the waterfalls. The maximum power coefficient of this turbine is approximately 60%. Also, to respond to changes in the waterfall flow rate, we placed a flat plate on the upper side of the rotor to control the water flow direction. As a result, we found that the coefficient of this turbine is increased with the flow rate and power could be obtained even when the flow rate changed by 3.5 times if the plate was placed on the upper side of the rotor. Although the power coefficient decreased when the plate was installed, the power coefficient still is from 53 to 58%. (author)

Gas turbines

Energy Technology Data Exchange (ETDEWEB)

Farahan, E.; Eudaly, J.P.

1978-10-01

This evaluation provides performance and cost data for commercially available simple- and regenerative-cycle gas turbines. Intercooled, reheat, and compound cycles are discussed from theoretical basis only, because actual units are not currently available, except on a special-order basis. Performance characteristics investigated include unit efficiency at full-load and off-design conditions, and at rated capacity. Costs are tabulated for both simple- and regenerative-cycle gas turbines. The output capacity of the gas turbines investigated ranges from 80 to 134,000 hp for simple units and from 12,000 to 50,000 hp for regenerative units.

Corporate plan 1997/98 to 2001/02

International Nuclear Information System (INIS)

1997-01-01

The National Radiological Protection Board is a public authority established by the Radiological Protection Act 1970 with functions concerning the protection of people from radiation hazards. Members of the Board are appointed by the Health Ministers. Officers and employees of the Board are responsible to it for executing the functions. The Board produces a Corporate Plan which is presented to the Department of Health, its sponsoring Department. This is the Corporate Plan for 1997/98 and the subsequent four years to 2001/02. It follows from discussions with Government Departments and other customers and reflects Ministerial priorities. It also takes into account the recommendations of the recent Cabinet Office publication on Objective Setting and Monitoring in Executive Non-Departmental Public Bodies prepared by the Efficiency Unit. And it reflects the outcome of the recent Prior Options Review of the Board. The main purposes of the Corporate Plan are to describe the broad programme of work for the planning period and the manner in which it is to be implemented, to identify the strategic and specific objectives, and to make the necessary financial forecasts. (author)

Gas turbine installations in nuclear power plants in Sweden

International Nuclear Information System (INIS)

Sevestedt, Lars

1986-01-01

At each of the four nuclear power stations in Sweden (Ringhals, Forsmark, Oskarshamn, Barsebaeck) gas turbine generating sets have been installed. These units are normally used for peak load operation dictated of grid and System requirements but they are also connected to supply the electrical auxiliary load of the nuclear plant as reserve power sources. The gas turbines have automatic start capability under certain abnormal conditions (such as reactor trips, low frequency grid etc) but they can also be started manually from several different locations. Starting time is approximately 2- 3 minutes from start up to full load. (author)

Gas turbine installations in nuclear power plants in Sweden

Energy Technology Data Exchange (ETDEWEB)

Sevestedt, Lars [Electrical Equipment and Gas Turbines, Swedish State Power Board, Ringhals Nuclear Power Plant, S-430 22 Vaeroebacka (Sweden)

1986-02-15

At each of the four nuclear power stations in Sweden (Ringhals, Forsmark, Oskarshamn, Barsebaeck) gas turbine generating sets have been installed. These units are normally used for peak load operation dictated of grid and System requirements but they are also connected to supply the electrical auxiliary load of the nuclear plant as reserve power sources. The gas turbines have automatic start capability under certain abnormal conditions (such as reactor trips, low frequency grid etc) but they can also be started manually from several different locations. Starting time is approximately 2- 3 minutes from start up to full load. (author)

C-corporation Hotels vs. Hotel-REITs: A Theoretical and Practical Comparison

Directory of Open Access Journals (Sweden)

Tarik Dogru

2017-02-01

Full Text Available What are the main differences between C-corporation hotels, such as Marriott, Hilton, and Choice, and Hotel-REITs like Diamond Rock, Felcor, and Host? What are the potential growth opportunities in these hotel structures? The author answers these questions by comparing the two corporate structures.

Turbine related fish mortality

International Nuclear Information System (INIS)

Eicher, G.J.

1993-01-01

A literature review was conducted to assess the factors affecting turbine-related fish mortality. The mechanics of fish passage through a turbine is outlined, and various turbine related stresses are described, including pressure and shear effects, hydraulic head, turbine efficiency, and tailwater level. The methodologies used in determining the effects of fish passage are evaluated. The necessity of adequate controls in each test is noted. It is concluded that mortality is the result of several factors such as hardiness of study fish, fish size, concentrations of dissolved gases, and amounts of cavitation. Comparisons between Francis and Kaplan turbines indicate little difference in percent mortality. 27 refs., 5 figs

Study on the behavior of moisture droplets in low pressure steam turbines

International Nuclear Information System (INIS)

Kimura, Y.; Kuramoto, Y.; Yoshida, K.; Etsu, M.

1978-01-01

Low pressure stages of fossil turbines and almost all stages of nuclear and geothermal turbines operate on wet steam. Turbine operating on wet steam have the following two disadvantages: decrease of efficiency and erosion of blades. Decrease of efficiency results from an increase in profile loss caused by water films on the blade surface; loss of steam energy in breaking up the films and accelerating moisture droplets; undercooling and condensation shocks associated with it; velocity difference between water and steam phases and consequent decelerating action of moisture droplets in the rotating blades, etc. Impingement of moisture droplets on the rotating blades also causes quick erosion of the blades. In this paper, the behavior of moisture droplets in wet steam flow is described and the correlation between their behavior and the abovementioned two disadvantages of turbines operating on wet steam is clarified. (author)

Turbulence and wind turbines

DEFF Research Database (Denmark)

Brand, Arno J.; Peinke, Joachim; Mann, Jakob

2011-01-01

The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed.......The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed....

Power Curve of the AWEC-60 wind turbine; Curva de potencia del aerogenerador AWEC-60

Energy Technology Data Exchange (ETDEWEB)

Avia, F

1992-07-01

The experimental wind turbine AWEC-60 was developed to evaluate the possibilities of the Large Wind turbines, from the technical and economical point of view. The project was developed by a spanish-german group, integrated by Union Fenosa, Asinel, M.A.N. Neue Technologie and the Instituto de Energias Renovables from CIEMAT, starting the operation during the year 1990. In this paper, the obtention of the wind turbine power curve is presented, which has been obtained in agreement with the Recommended Practices for Wind Turbine Testing and Evaluation from the Executive Committee for the Research and Development on Wind Energy, of the International Energy Agency (AIE). Using the functioning data of the wind turbine correspondig to the first quarter of the year 1991, the power curves have been obtained, and the results have been compared with the curves measured in other similar Large wind turbines. (Author) 7 refs.

Optimization of Kaplan turbines. A contribution to economic efficiency; Optimierung von Kaplan-Turbinen. Ein Beitrag zur Betriebswirtschaftlichkeit

Energy Technology Data Exchange (ETDEWEB)

Sevcik, Petr

2009-07-01

The Kaplan turbine has the best theoretical efficiency chart in the total range of operation. In order to achieve these good properties, the turbine has to be adjusted optimally. In general, these settings are performed by the manufacturer of turbines during commissioning. In practice one often meets Kaplan turbines where the scenery does not correspond to the optimal control line. The author of the contribution under consideration reports on possible causes for these errors and also methods of how this scenery can be optimized cost-effectively and how to minimize power losses.

Rand Corporation

Science.gov (United States)

... Jobs at RAND Media Resources Congressional Resources Doing Business with RAND Supporting RAND Educational Opportunities Alumni Association Follow RAND Corporation on Facebook RAND Corporation on Twitter RAND Corporation on LinkedIn ...

Preliminary conceptual design of the secondary sodium circuit-eliminated JSFR (Japan Sodium Fast Reactor) adopting a supercritical CO2 turbine system (2). Turbine system and plant size

International Nuclear Information System (INIS)

Kisohara, Naoyuki; Sakamoto, Yoshihiko; Kotake, Shoji

2014-09-01

Research and development of the supercritical CO 2 (S-CO 2 ) cycle turbine system is underway in various countries for further improvement of the safety and economy of sodium-cooled fast reactors. The Component Design and Balance-Of-Plant (CD and BOP) of the Generation IV International Nuclear Forum (Gen-IV) has addressed this study, and their analytical and experimental results have been discussed between the relevant countries. JAEA, who is a member of the CD and BOP, has performed a design study of an S-CO 2 gas turbine system applied to the Japan Sodium-cooled Fast Reactor (JSFR). In this study, the S-CO 2 cycle turbine system was directly connected to the primary sodium system of the JSFR to eliminate the secondary sodium circuit, aiming for further economical improvement. This is because there is no risk of sodium-water reaction in the S-CO 2 cycle turbine system of SFRs. This report describes the system configuration, heat/mass balance, and main components of the S-CO 2 turbine system, based on the JSFR specifications. The layout of components and piping in the reactor and turbine buildings were examined and the dimensions of the buildings were estimated. The study has revealed that the reactor and turbine buildings could be reduced by 7% and 40%, respectively, in comparison with those in the existing JSFR design with the secondary sodium circuit employing the steam turbine. The cycle thermal was also calculated as 41.9-42.3%, which is nearly the same as that of the JSFR with the water/steam system. (author)

The role of governance in corporate social responsibility : lessons from Dutch finance

NARCIS (Netherlands)

de Graaf, Frank Jan; Stoelhorst, Jan Willem

This article extends the corporate social performance (CSP) model by studying the role of governance structures and governance systems in shaping corporate social responsibility. The authors argue that a governance perspective offers a fruitful research strategy both to study empirically how firms

Coordinated Control of Cross-Flow Turbines

Science.gov (United States)

Strom, Benjamin; Brunton, Steven; Polagye, Brian

2016-11-01

Cross-flow turbines, also known as vertical-axis turbines, have several advantages over axial-flow turbines for a number of applications including urban wind power, high-density arrays, and marine or fluvial currents. By controlling the angular velocity applied to the turbine as a function of angular blade position, we have demonstrated a 79 percent increase in cross-flow turbine efficiency over constant-velocity control. This strategy uses the downhill simplex method to optimize control parameter profiles during operation of a model turbine in a recirculating water flume. This optimization method is extended to a set of two turbines, where the blade motions and position of the downstream turbine are optimized to beneficially interact with the coherent structures in the wake of the upstream turbine. This control scheme has the potential to enable high-density arrays of cross-flow turbines to operate at cost-effective efficiency. Turbine wake and force measurements are analyzed for insight into the effect of a coordinated control strategy.

Wind turbines and idiopathic symptoms

DEFF Research Database (Denmark)

Blanes-Vidal, Victoria; Schwartz, Joel

2016-01-01

Whether or not wind turbines pose a risk to human health is a matter of heated debate. Personal reactions to other environmental exposures occurring in the same settings as wind turbines may be responsible of the reported symptoms. However, these have not been accounted for in previous studies. We...... investigated whether there is an association between residential proximity to wind turbines and idiopathic symptoms, after controlling for personal reactions to other environmental co-exposures. We assessed wind turbine exposures in 454 residences as the distance to the closest wind turbine (Dw) and number...... of wind turbines

Employment of kernel methods on wind turbine power performance assessment

DEFF Research Database (Denmark)

Skrimpas, Georgios Alexandros; Sweeney, Christian Walsted; Marhadi, Kun S.

2015-01-01

A power performance assessment technique is developed for the detection of power production discrepancies in wind turbines. The method employs a widely used nonparametric pattern recognition technique, the kernel methods. The evaluation is based on the trending of an extracted feature from...... the kernel matrix, called similarity index, which is introduced by the authors for the first time. The operation of the turbine and consequently the computation of the similarity indexes is classified into five power bins offering better resolution and thus more consistent root cause analysis. The accurate...

The Concept Of A Sustainable Approach To Corporate Real Estate Management

Directory of Open Access Journals (Sweden)

Ziemba Ewa

2015-12-01

Full Text Available This paper is conceptual in nature and presents the assumptions of a holistic approach to corporate real estate management. The approach is based on the imperative of sustainability, which has become a determinant of the proposed Sustainable Corporate Real Estate Management (SCREM model. Moreover, the authors indicate that in addition to the presence of the sustainability imperative, corporate real estate management requires the integration and formalization of knowledge about the concepts of corporate real estate management (CREM with those of corporate social responsibility (CSR. This approach is intended to enable the identification and improvement of real estate management processes and, as a result, contribute to more efficient and effective corporate real estate management and continuous and flexible development of enterprises, as well as boosting economic growth and building prosperity for present and future generations.

The Significance of the 2014 Corporate Governance Code of the Bank of Russia

Directory of Open Access Journals (Sweden)

Anna Vladislavovna Shashkova

2014-01-01

Full Text Available The present article focuses on corporate governance in Russia, as well as on the approval in 2014 of the Code of Corporate Governance by the Bank of Russia and by the Russian Government. The article also provides the concept of the famous foreign term Compliance. Compliance is a system based on binding rules of conduct contained in the regulations which are mandatory for the company. In order to fulfill best practices and implement local acts on the most important issues for the company, many foreign companies as well as large Russian companies have formed special Compliance departments. Taking into account such international experience and international corporate governance principles the Bank of Russia has elaborated the Corporate Governance Code, approved by the Russian Government in February 2014. Corporate Governance Code regulates a number of the most important issues of corporate governance such as shareholders'rights and fair treatment of shareholders; Board of Directors; Corporate Secretary of the Company; system of remuneration of members of the Board of Directors, executive bodies and other key executives of the company; system of risk management and internal control; disclosure of information about the company, the information policy of the company; major corporate actions. The most important issue which is analyzed by the author is the problem of the composition of the Board of Directors: the presence of independent directors in the company. According to the author the new Corporate Governance Code reflects the latest trends as well as the current situation with corporate governance in Russia today.

Promoting nuclear energy through corporate media tools

International Nuclear Information System (INIS)

Moore, Alexander

2002-01-01

This presentation looks at the best way of communicating a specific message and how Urenco Ltd have achieved this by promoting the benefits of nuclear energy through current corporate media. The presentation is split in to two segments; firstly considering the basics of good communication and how communication tools can be used in a variety of ways to maximize the effectiveness of messages and ideas. Secondly, examples of how Urenco have used current corporate publications in order to present the benefits of nuclear energy to a wider audience. (author)

Blade profile optimization of kaplan turbine using cfd analysis

International Nuclear Information System (INIS)

Janjua, A.B.; Khalil, M.S.

2013-01-01

Utilization of hydro-power as renewable energy source is of prime importance in the world now. Hydropower energy is available in abundant in form of falls, canals rivers, dams etc. It means, there are various types of sites with different parameters like flow rate, heads, etc. Depending upon the sites, water turbines are designed and manufactured to avail hydro-power energy. Low head turbines on runof-river are widely used for the purpose. Low head turbines are classified as reaction turbines. For runof-river, depending upon the variety of site data, low head Kaplan turbines are selected, designed and manufactured. For any given site requirement, it becomes very essential to design the turbine runner blades through optimization of the CAD model of blades profile. This paper presents the optimization technique carried out on a complex geometry of blade profile through static and dynamic computational analysis. It is used through change of the blade profile geometry at five different angles in the 3D (Three Dimensional) CAD model. Blade complex geometry and design have been developed by using the coordinates point system on the blade in PRO-E /CREO software. Five different blade models are developed for analysis purpose. Based on the flow rate and heads, blade profiles are analyzed using ANSYS software to check and compare the output results for optimization of the blades for improved results which show that by changing blade profile angle and its geometry, different blade sizes and geometry can be optimized using the computational techniques with changes in CAD models. (author)

European Corporate Law, 2nd edition

DEFF Research Database (Denmark)

Werlauff, Erik; Dorresteijn, Adriaan; Monteiro, Tiago Pereira

As in the First Edition (1995) of this well-known book, the authors demonstrate that analysis and comparison of national corporate laws on a number of issues yield highly valuable general principles and observations, not least because business organisations, wherever located, tend to show...

Corporate Support of Education: No Strings Attached

Science.gov (United States)

Cabot, Louis W.

1978-01-01

Nothing is better calculated to drive a wedge between the corporate community and our universities than efforts on the part of business to dictate to a community of scholars how it shall fulfill its mission. (Author)

Activities for turbine maintenance: planning, implementation and evaluation of inspection results

International Nuclear Information System (INIS)

Azcue, J.; Sanchez, M. A.; Alvaro, M.

2014-01-01

The article will cover the most significant aspects of how Tecnatom carry out the turbine maintenance work, both from the point of view of the inspection itself as the pre-and post tasks associated. Thus, the issues that will be part of the article are the Manual Inspection Service (MISI) and the inspection database, ISI WEB. These tools are essential for planning field work and serve as a guide to run later turbine inspections in different plants. Following this introduction the inspection teams and the techniques used by Tecnatom will be described. finally, the article will contain a small mention about management studies of life and integrity analysis of the turbine that can be performed, as well as involvement in its safe operation that is derived from them. Ultimately, the intention is to provide a comprehensive approach to the issue in question, the turbine maintenance work, so that the reader can get an ideal of the whole process. (Author)

Power-generation method using combined gas and steam turbines

Energy Technology Data Exchange (ETDEWEB)

Liu, C; Radtke, K; Keller, H J

1997-03-20

The invention concerns a method of power generation using a so-called COGAS (combined gas and steam) turbine installation, the aim being to improve the method with regard to the initial costs and energy consumption so that power can be generated as cheaply as possible. This is achieved by virtue of the fact that air taken from the surrounding atmosphere is splint into an essentially oxygen-containing stream and an essentially nitrogen-containing stream and the two streams fed further at approximately atmospheric pressure. The essentially nitrogen-containing stream is mixed with an air stream to form a mixed nitrogen/air stream and the mixed-gas stream thus produced is brought to combustion chamber pressure in the compressor of the gas turbine, the combustion of the combustion gases in the combustion chamber of the gas turbine being carried out with the greater part of this compressed mixed-gas stream. (author) figs.

Wind turbines in Danish waters - a survey of the authorities' interests, evaluations and recommendations

International Nuclear Information System (INIS)

1995-02-01

The document produced by a committee under the Danish Ministry for Energy and the Environment aims at meeting the current need for clarifying potentials for placing wind turbine arrays in Danish waters. It deals with (a) marine areas which are of especial interest, a fact which would be a barrier for the establishment of wind turbine arrays, and with (b) marine areas in connection with which permission to establish such arrays is only granted after serious consideration of local needs and interests. In connection with (a) special interests are defined: areas with a bird-life protected by European Union (EU) legislation, conservation areas, land where raw materials can be mined etc., places where buildings or ruins etc, of cultural/historical interest are to be found, military training grounds, principal shipping routes, cable and piping locations, or areas where a bridge is planned to be built. In connection with (b), local interests are defined as fishing areas, places included in landscaping projects, areas where there are large numbers of birds, harbours, areas near airports, radio or navigations systems etc., areas where raw materials are to be found, places where Stone Age habitations exist, marine areas where private yachts are sailed, military training areas, etc. A number of Danish fjords are mentioned as being included in the survey which should result in the choice of Danish waters where wind farm arrays could be established. (AB) 15 maps

Specifics of corporate management in agribusiness in transitional conditions

Directory of Open Access Journals (Sweden)

Vignjević-Đorđević Nada

2015-01-01

Full Text Available Corporate governance in agribusiness describes an agency problem resulting from separation of ownership from control in modern corporations and represents a huge cost to the shareholders. The agency problem is regulated by legal protection of minority shareholders, by constituting the Board of Directors as a Supervisory authority to monitor managers and an active agribusiness market for corporate control in agribusiness (against hostile takeover. These mechanisms are regulated by regulations on securities (at the federal level, corporate law (at the state level, and the corporate statutes, regulations and other Contracting Rules (at the company level. These regulations, laws and decrees actually define distribution of power between shareholders and managers. Such techniques of defense against takeover can be beneficial to shareholders, if managers use them to strengthen the bargaining power and increase the selling price of an agribusiness company. However, if managers use it for preservation of position and for the achievement of personal interests these regulations do not contribute to the realization of shareholders' interests.

Wind turbine supply in Canada

International Nuclear Information System (INIS)

Snodin, H.

2007-01-01

This study reported on wind turbine supplies to the Canadian market. The report was written to address concerns for Canada's supply outlook in the near future due to the booming wind energy market. Turbine shortages have arisen as a result of continued growth in both European and North American markets. Long lead-times on turbine orders are now increasing the pressure to lock in turbine supply during the initial phases of the development process. Future growth of the wind energy industry will be impacted if turbine supply difficulties continue to contribute to uncertainties in the development process. The report provided an overview of the North American and global wind energy markets, as well as a summary of telephone interviews conducted with turbine suppliers. The implications for the future of turbine supply to the Canadian market were also analyzed. It was concluded that policy-makers should focus on supporting the expansion of manufacturing facilities for small wind turbines and control infrastructure in Canada 7 refs., 3 figs

Corporate Sustainable Development Assessment Base on the Corporate Social Responsibility

OpenAIRE

Sun Mei; Nagata Katsuya; Onoda Hiroshi

2011-01-01

With the resource exhaustion, bad affections of human activities and the awakening of the human rights, the corporate social responsibility became popular corporate strategy achieving sustainable development of both corporation and society. The issue of Guideline of Chinese Corporate Social Responsibility Report promotes greatly corporation to take social responsibility. This paper built the index system according to this guideline and takes the textile industry as an exa...

Expert group study on recommended practices for wind turbine testing and evaluation. 10. Measurement of noise immission from wind turbines at noise receptor locations

International Nuclear Information System (INIS)

Ljunggren, S.

1997-01-01

The purpose of this guide is to provide a set of techniques and methods for the measurement and description of wind turbine noise immission, that is, wind turbine noise at receptor locations. These techniques and methods have been prepared so that they can be used by: manufacturers; developers; operators; planning authorities; research and development engineers, for the purpose of verification of compliance with noise immission limits and of noise propagation models. The measurement of noise immission from wind turbines is a complex acoustic task. This guideline cannot cover all possible problems that may be encountered on, for instance: determination of wind speed; measurements in cases of low signal-to-noise ratio; allowance for reflections from buildings. Thus, it is strongly recommended that the measurements described in this guide are always carried out by experienced acousticians. (au)

INTERNAL CONTROLS IN ENSURING GOOD CORPORATE GOVERNANCE IN FINANCIAL INSTITUTIONS

Directory of Open Access Journals (Sweden)

KOSMAS NJANIKE

2011-01-01

Full Text Available This paper assessed factors that influence the internal controls in ensuring good corporate governance in financial institutions in developing economies with special reference to Zimbabwe. The research paper assessed how lack of internal controls affected good corporate governance and aimed to bring out elements of good corporate governance. It emerged that failure to effectively implement internal controls contributed significantly to poor corporate governance. The study discovered that internal control system overrides and the issue of “fact cat” directors also contributed to poor corporate governance. The study recommended that there is need for the board of directors to guarantee an organizational structure that clearly defines management responsibilities, authority and reporting relationships. There is also need to ensure that delegated responsibilities are effectively carried out to ensure compliance with internal controls of the financial institution concerned.

Studi Eksperimen Perbandingan Pengaruh Variasi Tekanan Inlet Turbin danVariasi Pembebanan Terhadap Karakteristik Turbin Pada Organic Rankine Cycle

Directory of Open Access Journals (Sweden)

Dwi Dharma Risqiawan

2013-12-01

Full Text Available Sistem pembangkit listrik telah berinovasi pada saat ini untuk tetap memenuhi kebutuhan akan ketersediaan listrik salah satunya dengan Organic Rankine Cycle (ORC. Sistem ini terdiri dari empat komponen utama yaitu evaporator, turbin, kondensor, dan pompa.Fluida kerja dipompa ke evaporator untuk membangkitkan uap lalu digunakan menggerakkan turbin.Uap hasil ekspansi turbin dikondensasi dan dialirkan oleh pompa kembali ke evaporator.Sistem ini mampu memanfaatkan sumber energi yang memiliki temperatur dan tekanan rendah untuk membangkitkan uap fluida organik. Penelitian ini dilakukan untuk mengevaluasi kinerja turbin pada sistem ORC dengan memvariasikan tekanan masuk turbin dan pembebanan dengan menggunakan R-123 sebagai fluida kerja .Pengambilan data dilakukan dengan memvariasikan tekanan masuk turbin pada setiap variasi pembebanan generator.Pengamatan dilakukan hanya pada turbin untuk mengetahui karakteristik turbin yang digunakan saat ini.Pengambilan data dilakukan dengan R-123 sebagai fluida kerja. Dari eksperimen didapatkan temperatur masuk dan keluar turbin,kecepatan putaran turbin dalam rpm, dan enthalpy dapat diketahui. Enthalpy digunakan untuk mengitung kerja yang dihasilkan turbin, efisiensi turbin dan efisiensi sudu turbin.Pada tekanan masuk turbin 8 bar dan beban 1000 Watt data dengan nilai terbaik didapatkan.Hasil perhitungan data didapatkan kerja yang dihasilkan turbin yang terbesar adalah 5,4 KW. Hasil lain yang dapat diketahui adalah efisiensi turbin tertinggi 88%. Efisiensi sudu turbin tertinggi yang terhitung adalah 42,9%.

Dynamics of a Marine Turbine for Deep Ocean Currents

Directory of Open Access Journals (Sweden)

Ling-Yuan Chang

2016-09-01

Full Text Available For most of the ocean currents, such as the Kuroshio at east Taiwan, the Gulf Stream at east Florida and the Agulhas Current at southeast Africa, the depth of the seabed is generally deeper than one hundred meters, some waters of which can even reach one thousand meters. In such deep waters, the design of the turbine, as well as the anchoring system shall have special features so that existing ocean engineering technologies can be applied and the engineering cost can be lowered. Thus, as regards design, in addition to the analysis of the interaction between turbine and current, priority shall also be given to the design of the anchoring system of the turbine. To address the concerns, the authors propose an ocean turbine featured as follows: (1 it can be anchored in deep waters with a single cable; (2 it can generate high power in a current of moderate flow speed while producing low drag; (3 it can be self-balanced against current disturbance; (4 it is shrouded to enhance power efficiency; (5 the dynamic variations due to the interaction between the turbine and current are small. All of these features are confirmed with the computational results, leading to a detailed design of the turbine structure. If the easy-to-install high-efficiency shrouded turbines, having the capability to self-balance and requiring minimum maintenance effort, are successfully developed, the power supply pressure in Taiwan can be greatly alleviated. The Kuroshio was chosen as the typical current for the present dynamic analysis because, firstly, the flow characteristics of Kuroshio are similar to those of other large-scale currents mentioned above, and secondly, the data of Kuroshio are highly available to us so that a thorough analysis can be done.

Effects of wind turbines on human health and environment

Energy Technology Data Exchange (ETDEWEB)

Ramanan, G [RV College of Engineering, Bangalore (India); Pandian, A; Gowda, G; Raghunandan, A [MS RAMAIAH Institute of Technology, Bangalore (India)

2012-07-01

The impact of climate change through global warming has been a concern for some time now. Targets are being set for ratifying countries to reduce their CO{sup 2} emissions. In order to achieve reduction in CO{sup 2} emissions, there must be sustained move in the production of electricity from renewable sources other than fossil fuel combustion. Of the renewable energy sources, the most realistic and economic is Wind Power. The Asian continent is developing into one of the main powerhouses of Wind Energy. The strongest market leader in Wind Energy in the continent is India. On the flip side, there are some effects of Wind Turbines which are hazardous to human health like noise generated. Such hazards are also likely and known to affect the migratory birds during transition. This paper will address the effects of Wind Turbine on Human Health and Environment. The paper will focus on the following questions: (1)What are the potential health and environmental impacts of Wind Turbines? (2)How is exposure to Wind Turbine Noise assessed? (3)What consultation process with the community is required before Wind Farms are constructed? (Author)

Wind Turbine Generator System Power Performance Test Report for the ARE442 Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

van Dam, J.; Jager, D.

2010-02-01

This report summarizes the results of a power performance test that NREL conducted on the ARE 442 wind turbine. This test was conducted in accordance with the International Electrotechnical Commission's (IEC) standard, Wind Turbine Generator Systems Part 12: Power Performance Measurements of Electricity Producing Wind Turbines, IEC 61400-12-1 Ed.1.0, 2005-12. However, because the ARE 442 is a small turbine as defined by IEC, NREL also followed Annex H that applies to small wind turbines. In these summary results, wind speed is normalized to sea-level air density.

Draft-circular on wind turbines. Concept-circulaire wind turbines

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

Criteria for providing licenses to build and operate a wind turbine are surveyed. Factors to consider are: characteristics of the landscape, density of population, town and country planning, environmental aspects (birds), safety and nuisance. National regulations for wind turbines will simplify licensing procedures and improve legal security.

78 FR 51053 - Airworthiness Directives; Beechcraft Corporation and Hawker Beechcraft Corporation

Science.gov (United States)

2013-08-20

... Airworthiness Directives; Beechcraft Corporation and Hawker Beechcraft Corporation AGENCY: Federal Aviation... certain Beechcraft Corporation (type certificate previously held by Hawker Beechcraft Corporation) Models 58, 95-C55, E55, and 56TC airplanes; and Hawker Beechcraft Corporation Models 58P and 58TC airplanes...

Using neuro-fuzzy based approach for the evaluation of turbine-generator outputs

International Nuclear Information System (INIS)

Chan, Y. K.; Lu, C. C.; Chang, C. J.; Kao, L.; Hong, L. C.

2010-01-01

The objective of this study is to develop a hybrid soft-computing modeling technique used to develop the steam turbine cycle model for Chinshan Nuclear Power Station (CNPS). The technique uses neuro-fuzzy model to predict the turbine-generator output. Firstly, the station past three fuel cycles operating data above 95% load were collected and validated as the baseline performance data set. Then, the signal errors for new operating data were detected by comparison with the baseline data set and their allowable range of variations. Finally, the most important parameters were selected as an input of the neuro-fuzzy based steam turbine cycle model. After training and testing with key parameters including throttle pressure, condenser back pressure, feedwater mass flow, and final feedwater temperature, the proposed model can be applied to predict the turbine-generator output. The analysis results show this neuro-fuzzy based turbine cycle model can be used to predict the generator output with a good agreement. Moreover, the achievement of this study provides an alternative approach in thermal performance evaluation for nuclear power stations. (authors)

Steam generators, turbines, and condensers. Volume six

International Nuclear Information System (INIS)

Anon.

1986-01-01

Volume six covers steam generators (How steam is generated, steam generation in a PWR, vertical U-tube steam generators, once-through steam generators, how much steam do steam generators make?), turbines (basic turbine principles, impulse turbines, reaction turbines, turbine stages, turbine arrangements, turbine steam flow, steam admission to turbines, turbine seals and supports, turbine oil system, generators), and condensers (need for condensers, basic condenser principles, condenser arrangements, heat transfer in condensers, air removal from condensers, circulating water system, heat loss to the circulating water system, factors affecting condenser performance, condenser auxiliaries)

Wind turbine operated sailboat

Energy Technology Data Exchange (ETDEWEB)

Hall, R.

1990-07-31

A wind powered boat is disclosed which incorporates a vertical axis rotary turbine. A shaft portion extends downwardly from the turbine to a water pump, with the boat being provided with a forwardly opening inlet and a rearwardly opening outlet from the water pump. When rotating, the turbine operates the pump by the shaft to draw in water through the inlet, thereby creating a low pressure area in front of the boat, and to force the water out through the outlet for propelling the boat. In a preferred embodiment, the boat has a catamaran construction or is a large ocean going vessel with enough width to provide a buffer to either side of the turbine, and the turbine is the Darrieus rotor type. The pump is a standard centrifugal type of pump. A self adjusting braking device for the turbine is also disclosed, which prevents over-rotation and is also capable of storing heat energy generated during braking. 4 figs.

Corporate Diversity Programs and Gender Inequality in the Oil and Gas Industry.

Science.gov (United States)

Williams, Christine L; Kilanski, Kristine; Muller, Chandra

2014-11-01

Since the 1980s, major U.S. corporations have embraced diversity as a management strategy to increase the number of women in top jobs. Diversity management programs include targeted recruitment, hiring, and promotions policies; mentoring programs; affinity groups; and diversity training. Few of these programs have proven effective in achieving gender diversity in the corporate world, despite their widespread popularity. To explore the reasons for this, the authors investigate the experiences of women scientists in the oil and gas industry who are targeted by these programs. In-depth interviews reveal possible reasons why these programs fail to achieve their intended goals. The authors find that these programs can paradoxically reinforce gender inequality and male dominance in the industry. The authors discuss alternative approaches for addressing gender inequality in work organizations and conclude with implications of their findings for corporate approaches to promoting diversity and for future research.

Computer analysis on ANO-2 turbine trip test

International Nuclear Information System (INIS)

Senda, Yasuhide; Kanda, Keiji; McDonald, T.A.; Tessier, J.H.; Abramson, P.B.

1983-01-01

Safety analysis for nuclear power plants usually uses so detailed and large codes that it can be expensive and time-consuming. It is preferable to employ a simplified plant model to save cost and time. In this research, using RELAP5, a turbine trip test performed at Arkansas Nuclear One-Unit 2 (ANO-2) was analyzed with the simplified plant model in order to evaluate it for the turbine trip. Before the closure of the Main Steam Isolation Valve (MSIV), the calculation results agree well with the experimental data. After the MSIV closure, the results of the calculation explain the experimental data fairly well except for pressure recovery in the pressurizer. (author)

78 FR 52982 - Experian, Experian US Headquarters: Corporate Departments (Finance, HRMD, Contracts, Corporate...

Science.gov (United States)

2013-08-27

...,506R] Experian, Experian US Headquarters: Corporate Departments (Finance, HRMD, Contracts, Corporate... Headquarters: Corporate Departments (finance, HRMD, Contracts, Corporate Marketing, Global Corporate Systems... (finance, HRMD, Contracts, Corporate Marketing, Global Corporate Systems, Legal & Regulatory, Risk...

Wave energy plants: Control strategies for avoiding the stalling behaviour in the Wells turbine

Energy Technology Data Exchange (ETDEWEB)

Amundarain, Modesto; Alberdi, Mikel; Garrido, Aitor J.; Garrido, Izaskun; Maseda, Javier [Dept. of Automatic Control and Systems Engineering, EUITI Bilbao, University of the Basque Country, Plaza de la Casilla 3, 48012 Bilbao (Spain)

2010-12-15

This study analyzes the problem of the stalling behaviour in Wells turbines, one of the most widely used turbines in wave energy plants. For this purpose two different control strategies are presented and compared. In the first one, a rotational speed control system is employed to appropriately adapt the speed of the double-fed induction generator coupling to the turbine, according to the pressure drop entry. In the second control strategy, an airflow control regulates the power generated by the turbine generator module by means of the modulation valve avoiding the stalling behaviour. It is demonstrated that the proposed rotational speed control design adequately matches the desired relationship between the slip of the double-fed induction generator and the pressure drop input, whilst the valve control using a traditional PID controller successfully governs the flow that modulates the pressure drop across the turbine. (author)

Study of steam, helium and supercritical CO2 turbine power generations in prototype fusion power reactor

International Nuclear Information System (INIS)

Ishiyama, Shintaro; Muto, Yasushi; Kato, Yasuyoshi; Nishio, Satoshi; Hayashi, Takumi; Nomoto, Yasunobu

2008-01-01

Power generation systems such as steam turbine cycle, helium turbine cycle and supercritical CO 2 (S-CO 2 ) turbine cycle are examined for the prototype nuclear fusion reactor. Their achievable cycle thermal efficiencies are revealed to be 40%, 34% and 42% levels for the heat source outlet coolant temperature of 480degC, respectively, if no other restriction is imposed. In the current technology, however, low temperature divertor heat source is included. In this actual case, the steam turbine system and the S-CO 2 turbine system were compared in the light of cycle efficiency and plant cost. The values of cycle efficiency were 37.7% and 36.4% for the steam cycle and S-CO 2 cycle, respectively. The construction cost was estimated by means of component volume. The volume became 16,590 m 3 and 7240 m 3 for the steam turbine system and S-CO 2 turbine system, respectively. In addition, separation of permeated tritium from the coolant is much easier in S-CO 2 than in H 2 O. Therefore, the S-CO 2 turbine system is recommended to the fusion reactor system than the steam turbine system. (author)

Effects of wind turbines on birds. What needs to be taken into account in Finland

International Nuclear Information System (INIS)

Walsh, M.

1997-01-01

The author examines the current knowledge on bird fatalities from wind turbines. As the number of turbines around the Finnish coast increases, concern has been voiced by some ornithologists for the safety of birds, particularly during migration. However, studies confirm that few birds collide with wind turbines during the day, with the exception of some large birds of prey that sometimes attempt to use the tower or blades for perching. At night the collision risk is somewhat higher, but average collision rates per kilometre of wind turbines placed in a row (including the space between individual machines) is no higher than that per kilometre of motorway, an acceptable figure in view of the relatively low numbers of machines compared to roads. Wind turbines can potentially do more serious damage to birds if they are erected too near large breeding concentrations, e.g. important coastal wetlands. Many groups of water and wading birds avoid feeding or nesting near turbines up to a range of 500-700 metres. (orig.)

Potential health impact of wind turbines

International Nuclear Information System (INIS)

2010-05-01

In response to public health concerns about wind turbines, a study was conducted to review the scientific evidence on the potential health effects of wind turbines. Several research questions were examined, including scientific evidence on the potential health impacts of wind turbines; the relationship between wind turbine noise and health; the relationship between low frequency sound, infrasound and health; assessment of exposure to wind turbines; wind turbine health and safety hazards and Ontario wind turbine setbacks; community consultation prior to wind farm construction and data gaps and research needs. The study showed that although some people living near wind turbines reported symptoms such as dizziness, headaches, and sleep disturbance, the scientific evidence available to date does not demonstrate a direct causal link between wind turbine noise and adverse health effects. The sound level from wind turbines at common residential setbacks is not sufficient to cause hearing impairment or other direct health effects, although some people may find it annoying. 41 refs., 1 appendix.

Integrating Corporate Social Responsability Programs into the Ethical Dimension of the Organization

OpenAIRE

Ibrian CARAMIDARU; Sabina IRIMIE

2011-01-01

The purpose of this paper is to indicate the need to integrate corporate social responsibility programs into the global ethical vision of organizations. Such an approach requires the definition of the corporation in relation to the moral values it assumes and the ways in which moral values occur within the organization. On this foundation, the authors examined the various implications that moral values have on the initiation and conduct of corporate social responsibility programs.

Corporate Taxation and Corporate Governance

DEFF Research Database (Denmark)

Köthenbürger, Marko; Stimmelmayr, Michael

2009-01-01

if the corporate tax system exempts the normal return on investment from taxation. The optimal system may well use the full return on investment as a tax base. Hence, tax systems such as an Allowance for Corporate Equity (ACE) or a Cash-flow tax do not have the familiar efficiency-enhancing effects in the presence...

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

International Nuclear Information System (INIS)

Ko, P; Kurosawa, S

2014-01-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

Science.gov (United States)

Ko, P.; Kurosawa, S.

2014-03-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine.

LITERATURE REVIEW ON CORPORATE GOVERNANCE - FIRM PERFORMANCE RELATIONSHIP

Directory of Open Access Journals (Sweden)

Pintea Mirela-Oana

2015-07-01

Full Text Available In the matter of corporate governance reforms, an important aspect is whether the implementation of corporate governance principles and codes has a positive impact on firm performance. The literature testing the relationship between different corporate governance mechanisms and firm performance is extensive. Over time, a lot of corporate governances mechanisms were studied in relation to firm performance and the most used are: CEO duality, board size, proportion of non- executive directors, board committees, ownership structure and concentration, managers’ compensation and incentives schemes. With time, different authors began to use more comprehensive measures for corporate governance rather than a single variable or a single governance mechanism, the so called corporate governance indexes. Regarding performance there are three main approaches to firm performance in social science research: research based on market prices, accounting ratios and total factor profitability.The most used performance measures are: Tobin’s Q, return on equity, return on asset and economic value added. In our paper, we present the studies undertaken since the 1990’s regarding the relationship between different mechanisms of corporate governance and firm performance and between corporate governance index and performance for both developed and developing countries around the world. Regarding the working tools used in this theoretical research we can mention the longitudinal method, by presenting the evolution in time of empirical studies on the research topic and the comparative method used in presenting the resulys of different studies mentioned in our paper. The results of the studies are inconclusive, some studies founded a strog positive relation, others founded a negative correlation between corporate governance and firm performance, while a third category of studies didn’t found any relationship at all. We used participative observation method by issuing

The production tax credit for wind turbine powerplants is an ineffective incentive

International Nuclear Information System (INIS)

Kahn, E.; California Univ., Berkeley, CA

1996-01-01

The US Energy Policy Act (EPAct) of 1992 created a production tax credit of 1.5c/kWh available for 10 years to promote certain renewable energy technologies, including wind turbines. This paper argues that the impact of the wind turbine production tax credit will be minimal. The argument depends entirely on the nature of the project finance structure used by the private power industry for wind turbine development. We show that tax credits can only be absorbed by equity investors if there is a large fraction of equity in the project capital structure. This raises the financing cost of wind turbine projects compared to conventional power technology, which relies on a large fraction of low cost debt. If the tax credit were paid as a cash subsidy, the capital structure could be shifted to low cost debt and financing costs could be significantly reduced. (Author)

Attitudes Toward Domestic Violence and Corporal Punishment Among Former Soviet Union Immigrants in Israel.

Science.gov (United States)

Enosh, Guy; Leshem, Elazar; Buchbinder, Eli

2016-10-01

The study regards attitudes of Russian immigrants in Israel toward wife abuse and corporal punishment. The sample consisted of 1,028 participants, based on a multistage cluster sampling. The study used a questionnaire related to immigration, acculturation, and attitudinal issues. The findings indicate a dual-causal model, in which corporal punishment attitudes contribute to wife abuse attitudes and vice versa. However, the effect of attitudes supporting corporal punishment was stronger than the effect of wife abuse attitudes, indicating that the attitudinal system as a precursor of violent behavior is already merging the two types of violence. © The Author(s) 2016.

Cogeneration steam turbines from Siemens: New solutions

Science.gov (United States)

Kasilov, V. F.; Kholodkov, S. V.

2017-03-01

The Enhanced Platform system intended for the design and manufacture of Siemens AG turbines is presented. It combines organizational and production measures allowing the production of various types of steam-turbine units with a power of up to 250 MWel from standard components. The Enhanced Platform designs feature higher efficiency, improved reliability, better flexibility, longer overhaul intervals, and lower production costs. The design features of SST-700 and SST-900 steam turbines are outlined. The SST-700 turbine is used in backpressure steam-turbine units (STU) or as a high-pressure cylinder in a two-cylinder condensing turbine with steam reheat. The design of an SST-700 single-cylinder turbine with a casing without horizontal split featuring better flexibility of the turbine unit is presented. An SST-900 turbine can be used as a combined IP and LP cylinder (IPLPC) in steam-turbine or combined-cycle power units with steam reheat. The arrangements of a turbine unit based on a combination of SST-700 and SST-900 turbines or SST-500 and SST-800 turbines are presented. Examples of this combination include, respectively, PGU-410 combinedcycle units (CCU) with a condensing turbine and PGU-420 CCUs with a cogeneration turbine. The main equipment items of a PGU-410 CCU comprise an SGT5-4000F gas-turbine unit (GTU) and STU consisting of SST-700 and SST-900RH steam turbines. The steam-turbine section of a PGU-420 cogeneration power unit has a single-shaft turbine unit with two SST-800 turbines and one SST-500 turbine giving a power output of N el. STU = 150 MW under condensing conditions.

Integration of an Inter Turbine Burner to a Jet Turbine Engine

Science.gov (United States)

2013-03-01

Technology AFRL = Air Force Research Laboratory EGV = Exit Guide Vane HPT = High-Pressure Turbine ID = Inner Diameter IGV = Inlet Guide Vane...been able to show computationally that the compressor exit guide vane (EGV) and the turbine inlet guide vane ( IGV ) could be combined into a single...turbine engine hot section. The red slashed out sections are, from left to right, the compressor exit vane, HPT IGV , and the stator between the HPT and

Turbine and its turbine control system of full scope simulator for Qinshan 300 MW Nuclear Power Unit

International Nuclear Information System (INIS)

Zhang Dongwei; Zhu Jinping

1996-01-01

The simulation for Qinshan 300 MW Nuclear Power Unit turbine and turbine control system is briefly introduced. The simulation system includes lube oil system, jacking oil pump system, turning gear system, turbine supervisor system and turbine control system. It not only correctly simulates the process of turbine normal start up, operation, and shut down, but also the response of turbine under the malfunction conditions

Corporate reputation: a review of literature

Directory of Open Access Journals (Sweden)

Patricia de Salles Vance

2007-12-01

Full Text Available The term corporate reputation has been mentioned in academic papers for some decades however since the 90's the debate about it has been intensified by authors of different areas of study. Therefore, there is a growing pressure around the definition of a construct and the way to measure an organization's corporate reputation. The purpose of this article is to present a literature review on corporate reputation in three different perspectives. At first, we intended to go through the literature, pointing out the different definitions presented on this theme. The second aspect refers to the identification of terms related to corporate reputation, such as corporate brand, corporate identity and corporate communication. Finally, broadening the possibilities of future empiric works, a review of the different proposals of measuring the corporate reputation of organizations is made.O tema reputação corporativa tem sido objeto de estudos acadêmicos há algumas décadas, porém, somente a partir da década de 90 intensificou-se esse interesse, manifestado por autores de diferentes áreas de estudo. A diversidade de abordagens pressiona o debate sobre a definição de um constructo e sobre a forma mais adequada de mensuração da reputação corporativa de uma organização. O propósito deste artigo é realizar uma revisão da literatura sobre a questão da reputação corporativa em três perspectivas distintas. Pretende-se, em primeiro lugar, percorrer a literatura sobre o assunto, apontando as diferentes definições apresentadas do tema. Em seguida, identificar os termos correlatos à reputação corporativa, como: marca corporativa, identidade corporativa e comunicação corporativa. E, finalmente, a fim de ampliar as possibilidades de trabalhos empíricos futuros, examinar criticamente as diferentes propostas de mensuração da reputação corporativa das organizações.

Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions

Science.gov (United States)

2017-03-06

WP-201317) Demonstration of Novel Sampling Techniques for Measurement of Turbine Engine Volatile and Non-volatile Particulate Matter (PM... Engine Volatile and Non-Volatile Particulate Matter (PM) Emissions 6. AUTHOR(S) E. Corporan, M. DeWitt, C. Klingshirn, M.D. Cheng, R. Miake-Lye, J. Peck...the performance and viability of two devices to condition aircraft turbine engine exhaust to allow the accurate measurement of total (volatile and non

76 FR 23459 - Federal Agricultural Mortgage Corporation Governance and Federal Agricultural Mortgage...

Science.gov (United States)

2011-04-27

... with Farmer Mac's statutory authority to finance rural utility loans and to revise the treatment of... corporate bond default and recovery rates. DATES: Effective date: This regulation will be effective 30 days... solely on historical corporate bond default and recovery rates, and ``stressed GOA'' factors to refer...

Aspects concerning the quality of aeration for environmental friendly turbines

Energy Technology Data Exchange (ETDEWEB)

Bunea, F; Oprina, G [Hydrodynamics Department, National Institute for R and D in Electrical Engineering ICPE-CA, Splaiul Unirii, 313, Bucharest, 030138 (Romania); Houde, S; Ciocan, G D [Laboratoire de Machines Hydrauliques, Pavillon Adrien-Pouliot Universite Laval, 1065 rue de la medecine, Quebec G1V 0A6 (Canada); Baran, G; Pincovschi, I, E-mail: buneaflorentina@yahoo.co [Hydraulics, Hydraulic Machinery and Environmental Engineering Department, University Polytechnic of Bucharest, Splaiul Independentei, 313, Bucharest, 060042 (Romania)

2010-08-15

The hydro renewable energy provides a reliable power source; it does not pollute the air or land but affects the aquatic habitat due to low dissolved oxygen (DO) level in the water discharged from turbines. Hydro-turbines intake generally withdraws water from the bottom layer of the reservoirs with low DO level. In the different methods used for improving DO downstream the hydropower plants the volume of air is considered to be the main parameter of the injection. The energetic consumption is affected, in terms of loss of turbine efficiency due to air injection. The authors propose a study to show the importance of the quality of air injection, meaning bubble size, pressure loss on the aeration device etc. Different types of fine bubble aeration systems have been tested and compared. The capacity to predict the aeration by numerical simulation is analysed.

Starting-up sequence of the AWEC-6 0 wind turbine

International Nuclear Information System (INIS)

Avia, F.; Cruz, M. de la

1991-01-01

One of the most critical status of the wind turbines operation is the starting-up sequence and the connection to the grid, due to the actuating loads that could be several times the loads during operation at rated conditions. Due to this fact, the control strategy is very important during the starting-up sequence in order to minimize the loads on the machine. For this purpose it is necessary to analyze the behaviour of the wind turbine during that sequence in different wind conditions and machine conditions This report shows the graphic Information about fifty starting-up sequences of the AWEC-60 wind turbine of 60 m diameter and 1200 kW of rated power, recorded in April 1991 and covering all the operation range between cut-in and cut-out wind speed. (Author) 2 refs

Mechanical (turbines and auxiliary equipment)

CERN Document Server

Sherry, A; Cruddace, AE

2013-01-01

Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

Corporate Social Responsibility and Corporate Financial Performance: Evidence from Korea

OpenAIRE

Choi, Jong-Seo; Kwak, Young-Min; Choe, Chongwoo

2010-01-01

This paper studies the empirical relation between corporate social responsibility (CSR) and corporate financial performance in Korea using a sample of 1122 firm-years during 2002-2008. We measure corporate social responsibility by both an equal-weighted CSR index and a stakeholder-weighted CSR index suggested by Akpinar et al. (2008). Corporate financial performance is measured by ROE, ROA and Tobin’s Q. We find a positive and significant relation between corporate financial performance and t...

Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

Energy Technology Data Exchange (ETDEWEB)

Foust, J. [Voith Hydro, Inc., York, PA (USA); Hecker, G. [Alden Research Laboratory, Inc., Holden, MA (USA); Li, S. [Alden Research Laboratory, Inc., Holden, MA (USA); Allen, G. [Alden Research Laboratory, Inc., Holden, MA (USA)

2011-10-01

The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), the design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall

Advanced LP turbine blade design

International Nuclear Information System (INIS)

Jansen, M.; Pfeiffer, R.; Termuehlen, H.

1990-01-01

In the 1960's and early 1970's, the development of steam turbines for the utility industry was mainly influenced by the demand for increasing unit sizes. Nuclear plants in particular, required the design of LP turbines with large annulus areas for substantial mass and volumetric steam flows. Since then the development of more efficient LP turbines became an ongoing challenge. Extensive R and D work was performed in order to build efficient and reliable LP turbines often exposed to severe corrosion, erosion and dynamic excitation conditions. This task led to the introduction of an advanced disk-type rotor design for 1800 rpm LP turbines and the application of a more efficient, reaction-type blading for all steam turbine sections including the first stages of LP turbines. The most recent developments have resulted in an advanced design of large LP turbine blading, typically used in the last three stages of each LP turbine flow section. Development of such blading required detailed knowledge of the three dimensional, largely transonic, flow conditions of saturated steam. Also the precise assessment of blade stressing from dynamic conditions, such as speed and torsional resonance, as well as stochastic and aerodynamic excitation is of extreme importance

Corporate Social and Ecological Responsibility of Russian Coal Mining Companies

Directory of Open Access Journals (Sweden)

Ravochkin Nikita

2017-01-01

Full Text Available Based on the provisions of corporate social responsibility and taking into account the specifics of Russian mining enterprises, the authors attempt to understand theoretically the corporate social and environmental responsibility in this paper. The study shows that the essence of the principles of socially responsible behavior has ancient roots, while the consumer's attitude towards nature begins only in the era of modern times. The genesis, evolution and transformation of social responsibility in Western countries in the twentieth century are traced. The necessity of taking into account the national social and cultural specifics of the domestic economy is substantiated instead of blind copying of foreign management practices. The difference in the formation of corporate social responsibility (CSR abroad and in Russia is shown. The list of facts and factors contributing to the formation of CSR in Russian realities is given. With regard to the coal industry enterprises inconsistencies have been identified. Their overcoming will allow the enterprises formulating strategies for corporate social and environmental responsibility. The advantages of social and environmental responsibility in comparison with the legal one are presented. In conclusion, the authors summed up the theoretical interpretation of the object claimed in the introduction.

Corporate Social and Ecological Responsibility of Russian Coal Mining Companies

Science.gov (United States)

Ravochkin, Nikita; Shchennikov, Vladimir; Syrov, Vasiliy

2017-11-01

Based on the provisions of corporate social responsibility and taking into account the specifics of Russian mining enterprises, the authors attempt to understand theoretically the corporate social and environmental responsibility in this paper. The study shows that the essence of the principles of socially responsible behavior has ancient roots, while the consumer's attitude towards nature begins only in the era of modern times. The genesis, evolution and transformation of social responsibility in Western countries in the twentieth century are traced. The necessity of taking into account the national social and cultural specifics of the domestic economy is substantiated instead of blind copying of foreign management practices. The difference in the formation of corporate social responsibility (CSR) abroad and in Russia is shown. The list of facts and factors contributing to the formation of CSR in Russian realities is given. With regard to the coal industry enterprises inconsistencies have been identified. Their overcoming will allow the enterprises formulating strategies for corporate social and environmental responsibility. The advantages of social and environmental responsibility in comparison with the legal one are presented. In conclusion, the authors summed up the theoretical interpretation of the object claimed in the introduction.

26 CFR 1.6062-1 - Signing of returns, statements, and other documents made by corporations.

Science.gov (United States)

2010-04-01

..., assistant treasurer, chief accounting officer, or any other officer duly authorized to sign such returns. It is not necessary that the corporate seal be affixed to the return. Spaces provided on return forms for affixing the corporate seal are for the convenience of corporations required by charter, or by law...

Transnational Corporations in Education: Filling the Governance Gap through New Social Norms and Market Multilateralism?

Science.gov (United States)

Bhanji, Zahra

2008-01-01

This paper explores the rising presence of transnational corporations (TNCs) in education and their mobilisation of global corporate social discourses to legitimise their private authority in education. The rising presence of TNCs is explored in the paper in two parts. First, through a taxonomy of global corporate social engagement (GCSE)…

Improved algorithm based on equivalent enthalpy drop method of pressurized water reactor nuclear steam turbine

International Nuclear Information System (INIS)

Wang Hu; Qi Guangcai; Li Shaohua; Li Changjian

2011-01-01

Because it is difficulty to accurately determine the extraction steam turbine enthalpy and the exhaust enthalpy, the calculated result from the conventional equivalent enthalpy drop method of PWR nuclear steam turbine is not accurate. This paper presents the improved algorithm on the equivalent enthalpy drop method of PWR nuclear steam turbine to solve this problem and takes the secondary circuit thermal system calculation of 1000 MW PWR as an example. The results show that, comparing with the design value, the error of actual thermal efficiency of the steam turbine cycle obtained by the improved algorithm is within the allowable range. Since the improved method is based on the isentropic expansion process, the extraction steam turbine enthalpy and the exhaust enthalpy can be determined accurately, which is more reasonable and accurate compared to the traditional equivalent enthalpy drop method. (authors)

The effects of improvement of the main shaft on the operating conditions of the Agnew turbine

Energy Technology Data Exchange (ETDEWEB)

Yassi, Y. [Iranian Research Organization for Science and Technology (IROST), Tehran (Iran)

2009-10-15

Agnew turbine is a 45 axial flow Kaplan type micro hydro. The turbine was designed by an ex-lecturer of the Univ. of Glasgow, to operate without guide vanes. Later due to a joint research program between the Iranian Research Organization for Science and Technology (IROST) and the Univ. of Glasgow it was developed to operate under low head and limited flow potentials in Iran. The original design of the main shaft of the turbine was supported by a bearing housing consisting of three bearings outside the main casing, leaving the rest of the shaft, hub and the runner without any supports inside the turbine.Later a suitable support near the runner and inside the casing was designed and installed. Standard turbine tests showed considerable improvements in operating characteristics of the turbine due to these design modifications. This paper presents details of these improvements and the related outcomes. (author)

A small capacity co generative gas-turbine plant in factory AD 'Komuna' - Skopje (Macedonia)

International Nuclear Information System (INIS)

Dimitrov, Konstantin; Armenski, Slave; Tashevski, Done

2000-01-01

The factory AD 'Komuna' -Skopje (Macedonia), has two steam block boilers, type ST 800 for steam production for process and space heating. The factory satisfies the electricity needs from the national grid. By the use of natural gas like fuel it is possible to produce electrical energy in its own co generative gas turbine plant. In this article, a co generative plant with small-scale gas turbine for electricity production is analyzed . The gas from gas turbine have been introduce in the steam block boiler. Also, a natural gas consumption, the electricity production, total investment and payback period of investment are determined. (Authors)

Design of rotor blade for vertical axis wind turbine using double aerofoil

Energy Technology Data Exchange (ETDEWEB)

Chougule, P.D.; Ratkovich, N.; Kirkegaard, P.H.; Nielsen, Soeren R.K. [Aalborg Univ.. Dept. of Civil Engineering, Aalborg (Denmark)

2012-07-01

Nowadays, small vertical axis wind turbines are receiving more attention compared to horizontal wind turbines due to their suitability in urban use,because they generate less noise, have bird free turbines and lower cost. There are few vertical axis wind turbines design with good power curve. However, the efficiency of power extraction has not been improved. Therefore, an attempt has been made to utilize high lift technology in practice for vertical axis wind turbines in order to improve power efficiency. High lift is obtained by double aerofoil elements mainly used in aeroplane wing design. In this current work, two aerofoils are used to design a rotor blade for a vertical axis wind turbine to improve the power efficiency on the rotor. Double aerofoil blade design consists of a main aerofoil and a slat aerofoil. The parameters related to position and orientation of the slat aerofoil with respect to the main aerofoil defines the high lift. Orientation of slat aerofoil is a parameter of investigation in this paper. Computational fluid dynamics (CFD) have been used to obtain the aerodynamic characteristics of double aerofoil. The CFD simulations were carried out using Star CCM+ v7.04 (CD-adapco, UK) software. Aerofoils used in this work are selected from standard aerofoil shapes. (Author)

Aerodynamic analysis of S series wind turbine airfoils by using X foil technique

International Nuclear Information System (INIS)

Zaheer, M.A.; Munir, M.A.; Zahid, I.; Rizwan, M.

2015-01-01

In order to attain supreme energy from wind turbine economically, blade profile enactment must be acquired. For extracting extreme power from wind, it is necessary to develop rotor models of wind turbine which have high rotation rates and power coefficients. Maximum power can also be haul out by using suitable airfoils at root and tip sections of wind turbine blades. In this research four different S-series airfoils have been selected to study their behavior for maximum power extraction from wind. The wind conditions during the research were scertained from the wind speeds over Kallar Kahar Pakistan. In order to study the wind turbine operation, the extremely important parameters are lift and drag forces. Therefore an endeavor to study lift force and drag force at various sections of wind turbine blade is shown in current research. In order to acquire the utmost power from wind turbine, highest value of sliding ratio is prerequisite. At various wind speeds, performance of several blade profiles was analyzed and for every wind speed, the appropriate blade profile is ascertained grounded on the utmost sliding ratio. For every airfoil, prime angle of attack is resolute at numerous wind speeds. (author)

Great expectations: large wind turbines

International Nuclear Information System (INIS)

De Vries, E.

2001-01-01

This article focuses on wind turbine product development, and traces the background to wind turbines from the first generation 1.5 MW machines in 1995-6, plans for the second generation 3-5 MW class turbines to meet the expected boom in offshore wind projects, to the anticipated installation of a 4.5 MW turbine, and offshore wind projects planned for 2000-2002. The switch by the market leader Vestas to variable speed operation in 2000, the new product development and marketing strategy taken by the German Pro + Pro consultancy in their design of a 1.5 MW variable speed pitch control concept, the possible limiting of the size of turbines due to logistical difficulties, opportunities offered by air ships for large turbines, and the commissioning of offshore wind farms are discussed. Details of some 2-5 MW offshore wind turbine design specifications are tabulated

FMA Roundtable on New Developments in European Corporate Governance

DEFF Research Database (Denmark)

Elson, Charles; Berglund, Tom; Rapp, Marc Steffen

2017-01-01

In this discussion that took place in Helsinki last June, three European financial economists and a leading authority on U.S. corporate governance consider the relative strengths and weaknesses of the world's two main corporate financing and governance systems: the Anglo-American market...... to address the question: can we expect one of these two systems to prevail over time, or will both systems continue to coexist, while seeking to adopt some of the most valuable aspects of the other? The consensus was that, in Germany as well as continental Europe, corporate financing and governance practices......-based system, with its dispersed share ownership, lots of takeovers, and an otherwise vigorous market for corporate control; and the relationship-based, or “main bank,” system associated with Japan, Germany, and continental Europe generally. The distinguishing features of the relationship-based system...

Limerick BWR turbine control and protection system upgrade success

International Nuclear Information System (INIS)

Tang, C.K.; Pietryka, T.S.; Federico, P.A.; Williams, J.C.

2015-01-01

Westinghouse and Exelon have successfully implemented a digital electro-hydraulic control (DEHC) at Limerick BWR Unit 1 Station to perform the turbine control, protection and reactor pressure functions. The DEHC replaces analog controls and addressed system performance, obsolescence and reliability. This was a first-of-a-kind application for control and protection of the main turbine and BWR pressure control for the distributed control system utilized. The demolition of analog equipment, main control room and front standard modifications, and acceptance testing were completed on schedule during the normal 2014 outage. Key aspects of the project that facilitated this success will be discussed and presented. (author)

Limerick BWR turbine control and protection system upgrade success

Energy Technology Data Exchange (ETDEWEB)

Tang, C.K.; Pietryka, T.S.; Federico, P.A., E-mail: tangck@westinghouse.com, E-mail: pietryt@westinghouse, E-mail: federipa@westinghouse.com [Westinghouse Electric Company, LLC, Cranberry Township, PA (United States); Williams, J.C., E-mail: Jonathan.Williams@exeloncorp.com [Exelon Nuclear, Warrenville, IL (United States)

2015-07-01

Westinghouse and Exelon have successfully implemented a digital electro-hydraulic control (DEHC) at Limerick BWR Unit 1 Station to perform the turbine control, protection and reactor pressure functions. The DEHC replaces analog controls and addressed system performance, obsolescence and reliability. This was a first-of-a-kind application for control and protection of the main turbine and BWR pressure control for the distributed control system utilized. The demolition of analog equipment, main control room and front standard modifications, and acceptance testing were completed on schedule during the normal 2014 outage. Key aspects of the project that facilitated this success will be discussed and presented. (author)

Variable geometry gas turbines for improving the part-load performance of marine combined cycles - Gas turbine performance

DEFF Research Database (Denmark)

Haglind, Fredrik

2010-01-01

The part-load performance of gas and steam turbine combined cycles intended for naval use is of great importance, and it is influenced by the gas turbine configuration and load control strategy. This paper is aimed at quantifying the effects of variable geometry on the gas turbine part...... of various components within gas turbines. Two different gas turbine configurations are studied, a two-shaft aero-derivative configuration and a single-shaft industrial configuration. When both gas turbine configurations are running in part-load using fuel flow control, the results indicate better part......-load performance for the two-shaft gas turbine. Reducing the load this way is accompanied by a much larger decrease in exhaust gas temperature for the single-shaft gas turbine than for the two-shaft configuration. As used here, the results suggest that variable geometry generally deteriorates the gas turbine part...

Corporate Foundations

DEFF Research Database (Denmark)

Herlin, Heidi; Thusgaard Pedersen, Janni

2013-01-01

action between business and NGOs through convening, translation, collaboration, and mediation. Our study provides valuable insights into the tri-part relationship of company foundation NGO by discussing the implications of corporate foundations taking an active role in the realm of corporate social...... responsibility (CSR). The paper hence illuminates the fascinating and overlooked role of corporate foundations as potential bridges between business and civil society. It also informs theory on boundary organizations by clarifying challenges and limits of such institutions.......This paper aims to explore the potential of Danish corporate foundations as boundary organizations facilitating relationships between their founding companies and non-governmental organizations (NGOs). Hitherto, research has been silent about the role of corporate foundations in relation to cross...

Study on performance and flow field of an undershot cross-flow water turbine comprising different number of blades

Science.gov (United States)

Nishi, Yasuyuki; Hatano, Kentaro; Inagaki, Terumi

2017-10-01

Recently, small hydroelectric generators have gained attention as a further development in water turbine technology for ultra low head drops in open channels. The authors have evaluated the application of cross-flow water turbines in open channels as an undershot type after removing the casings and guide vanes to substantially simplify these water turbines. However, because undershot cross-flow water turbines are designed on the basis of cross-flow water turbine runners used in typical pipelines, it remains unclear whether the number of blades has an effect on the performance or flow fields. Thus, in this research, experiments and numerical analyses are employed to study the performance and flow fields of undershot cross-flow water turbines with varying number of blades. The findings show that the turbine output and torque are lower, the fluctuation is significantly higher, and the turbine efficiency is higher for runners with 8 blades as opposed to those with 24 blades.

Graphene in turbine blades

Science.gov (United States)

Das, D. K.; Swain, P. K.; Sahoo, S.

2016-07-01

Graphene, the two-dimensional (2D) nanomaterial, draws interest of several researchers due to its many superior properties. It has extensive applications in numerous fields. A turbine is a hydraulic machine which extracts energy from a fluid and converts it into useful work. Recently, Gudukeya and Madanhire have tried to increase the efficiency of Pelton turbine. Beucher et al. have also tried the same by reducing friction between fluid and turbine blades. In this paper, we study the advantages of using graphene as a coating on Pelton turbine blades. It is found that the efficiency of turbines increases, running and maintenance cost is reduced with more power output. By the application of graphene in pipes, cavitation will be reduced, durability of pipes will increase, operation and maintenance cost of water power plants will be less.

Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems—Part A: Turbine Model

Directory of Open Access Journals (Sweden)

Andrea Meroni

2016-04-01

Full Text Available Axial-flow turbines represent a well-established technology for a wide variety of power generation systems. Compactness, flexibility, reliability and high efficiency have been key factors for the extensive use of axial turbines in conventional power plants and, in the last decades, in organic Rankine cycle power systems. In this two-part paper, an overall cycle model and a model of an axial turbine were combined in order to provide a comprehensive preliminary design of the organic Rankine cycle unit, taking into account both cycle and turbine optimal designs. Part A presents the preliminary turbine design model, the details of the validation and a sensitivity analysis on the main parameters, in order to minimize the number of decision variables in the subsequent turbine design optimization. Part B analyzes the application of the combined turbine and cycle designs on a selected case study, which was performed in order to show the advantages of the adopted methodology. Part A presents a one-dimensional turbine model and the results of the validation using two experimental test cases from literature. The first case is a subsonic turbine operated with air and investigated at the University of Hannover. The second case is a small, supersonic turbine operated with an organic fluid and investigated by Verneau. In the first case, the results of the turbine model are also compared to those obtained using computational fluid dynamics simulations. The results of the validation suggest that the model can predict values of efficiency within ± 1.3%-points, which is in agreement with the reliability of classic turbine loss models such as the Craig and Cox correlations used in the present study. Values similar to computational fluid dynamics simulations at the midspan were obtained in the first case of validation. Discrepancy below 12 % was obtained in the estimation of the flow velocities and turbine geometry. The values are considered to be within a

The Russia Corporate Governance Manual : Part I. Corporate Governance Introduced

OpenAIRE

International Finance Corporation; U.S. Department of Commerce

2004-01-01

The Russia corporate governance manual has been divided into and is published in six parts: (i) corporate governance introduced; (ii) good board practices; (iii) shareholder rights; (iv) information disclosure and transparency; (v) special focus section; and (vi) annexes model corporate governance documents. The first four parts contain chapters that focus on core corporate governance issu...

An integrated model for estimating energy cost of a tidal current turbine farm

International Nuclear Information System (INIS)

Li, Ye; Lence, Barbara J.; Calisal, Sander M.

2011-01-01

A tidal current turbine is a device for harnessing energy from tidal currents and functions in a manner similar to a wind turbine. A tidal current turbine farm consists of a group of tidal current turbines distributed in a site where high-speed current is available. The accurate prediction of energy cost of a tidal current turbine farm is important to the justification of planning and constructing such a farm. However, the existing approaches used to predict energy cost of tidal current turbine farms oversimplify the hydrodynamic interactions between turbines in energy prediction and oversimplify the operation and maintenance strategies involved in cost estimation as well as related fees. In this paper, we develop a model, which integrates a marine hydrodynamic model with high accuracy for predicting energy output and a comprehensive cost-effective operation and maintenance model for estimating the cost that may be incurred in producing the energy, to predict energy cost from a tidal current turbine farm. This model is expected to be able to simulate more complicated cases and generate more accurate results than existing models. As there is no real tidal current turbine farm, we validate this model with offshore wind studies. Finally, case studies about Vancouver are conducted with a scenario-based analysis. We minimize the energy cost by minimizing the total cost and maximizing the total power output under constraints related to the local conditions (e.g., geological and labor information) and the turbine specifications. The results suggest that tidal current energy is about ready to penetrate the electricity market in some major cities in North America if learning curve for the operational and maintenance is minimum. (author)

Annual report of the Certification Secretariat of Wind Turbines for 2010; AArsrapport: Energistyrelsens Godkendelsessekretariat for Vindmoeller 2010

Energy Technology Data Exchange (ETDEWEB)

Lemming, J.K.; Friis, P.

2011-12-15

This report was prepared as documentation for the activities in the Certification Secretariat of Wind Turbines in 2010. The secretariat has performed duties under a contract with the DEA, where the contents of the tasks are focused on administration of the Danish Certification Scheme for Wind Turbines. The report describes the current state of deployment of wind turbines in Denmark and the latest developments in wind turbine industry. Furthermore, the development of test areas is described. The tasks of the Secretariat has included daily administration, including ensuring the secretariat for the Advisory Committee, implementing the system of maintenance and service, development of new licensing rules for small wind turbines, and the approval and reviews of small wind turbines. In addition, the Secretariat and related experts from Risoe DTU participated in Danish and international standards committees. (Author)

Wind turbines and infrasound

International Nuclear Information System (INIS)

Howe, B.

2006-01-01

This paper provided the results of a study conducted to assess the impacts of wind farm-induced infrasound on nearby residences and human populations. Infrasound occurs at frequencies below those considered as detectable by human hearing. Infrasonic levels caused by wind turbines are often similar to ambient levels of 85 dBG or lower that are caused by wind in the natural environment. This study examined the levels at which infrasound poses a threat to human health or can be considered as an annoyance. The study examined levels of infrasound caused by various types of wind turbines, and evaluated acoustic phenomena and characteristics associated with wind turbines. Results of the study suggested that infrasound near modern wind turbines is typically not perceptible to humans through either auditory or non-auditory mechanisms. However, wind turbines often create an audible broadband noise whose amplitude can be modulated at low frequencies. A review of both Canadian and international studies concluded that infrasound generated by wind turbines should not significantly impact nearby residences or human populations. 17 refs., 2 tabs., 4 figs

Discord amongst the wind turbine buyers with regard to Dutch wind turbine manufacturers

International Nuclear Information System (INIS)

Janse, F.

1992-01-01

In the Netherlands two medium-large manufacturers of wind turbines exist: NedWind (Hollandia Kloos) and Windmaster Nederland (Begemann Groep). Also Lagerwey, which constructs wind turbines for the private market (farmers, cooperatives), is important for the Dutch market and successfull in Germany. There is a tendency amongst the Dutch energy utilities, which cooperate in the foundation WindPlan, to buy wind turbines from foreign manufacturers. Some energy utilities want to take advantage of the most attractive offers, while others want to cooperate in building up a Dutch wind turbine industry. 5 ills

Pengungkapan Corporate Social Responsibility, Struktur Corporate Governance dan Nilai Perusahaan

Directory of Open Access Journals (Sweden)

Salmah Pattisahusiwa

2017-06-01

Full Text Available The concept of the corporate social responsibility has a significant interest in Indonesia because believed to increase corporate’s value for shareholders. This study aims to find the effect of corporate social responsibility disclosure and corporate governance structure on corporate value. The data were taken from annual report of mining companies listed in Indonesian Stock Exchange for period of 2014-2015. The sample collection has been done by using purposive sampling with the certain criteria so that 18 companies which meet criteria have been obtained as samples. Multiple Regression analysis was employed to analyze data. The result of this research show that corporate social responsibility disclosure and corporate governance structure have significant effect to thecorporate value.

Parametric study of power turbine for diesel engine waste heat recovery

International Nuclear Information System (INIS)

Zhao, Rongchao; Zhuge, Weilin; Zhang, Yangjun; Yin, Yong; Chen, Zhen; Li, Zhigang

2014-01-01

Turbocompounding is a promising technology to recover waste heat from the exhaust and reduce fuel consumption for internal combustion engine. The design of a power turbine plays a key role in turbocompound engine performance. This paper presents a set of parametric studies of power turbine performed on a turbocompound diesel engine by means of turbine through-flow model developed by the authors. This simulation model was verified and validated using engine performance test data and achieved reasonable accuracy. The paper first analyzed the influence of three key geometrical parameters (blade height, blade radius and nozzle exit blade angle) on turbine expansion ratio and engine fuel consumptions. After that, the impacts of the geometrical parameters on power distribution, air mass flow rate and exhaust temperature were analyzed. Results showed that these parameters had significant effects on engine BSFC and power. At high engine speeds, there existed an optimum value of geometry parameter to obtain the lowest BSFC. At low engine speeds, the engine BSFC kept increasing or decreasing continuously as the geometry parameters changed. Research also found that the engine BSFC was most sensitive to the nozzle exit blade angle, which should be considered carefully during the design process. This paper provides a useful method for matching and designing of a power turbine for turbocompound engine. - Highlights: •Through-flow model of axial-flow power turbine for turbocompound engine was established. •Turbocompound engine performance test was carried out to validate the cycle simulation model. •Influences of power turbine geometry parameters on engine BSFC and power were presented

76 FR 73608 - Reliability Technical Conference, North American Electric Reliability Corporation, Public Service...

Science.gov (United States)

2011-11-29

... or municipal authority play in forming your bulk power system reliability plans? b. Do you support..., North American Electric Reliability Corporation (NERC) Nick Akins, CEO of American Electric Power (AEP..., EL11-62-000] Reliability Technical Conference, North American Electric Reliability Corporation, Public...

Navigating the “paradox of openness” in energy and transport innovation: Insights from eight corporate clean technology research and development case studies

International Nuclear Information System (INIS)

Sovacool, Benjamin K.; Jeppesen, Jakob; Bandsholm, Jesper; Asmussen, Joakim; Balachandran, Rakulan; Vestergaard, Simon; Andersen, Thomas Hauerslev; Sørensen, Thomas Klode; Bjørn-Thygesen, Frans

2017-01-01

Using an inductive case study approach drawn from original interview data, this article investigates the innovation approaches among a sample of international energy companies, or corporate firms. It first presents a conceptual framework synthesized from the business studies, entrepreneurship, evolutionary economics, innovation studies, management science, organization studies, political science, and sociology literature. This framework suggests that corporate approaches to clean technology innovation will cut across the four dimensions of organizational multiplicity and stakeholder involvement, information sharing, coordination and control, and market orientation. It then explores how eight firms—the Algal Carbon Conversion Flagship and Aurora Algae (biofuel), DONG and Statoil (carbon capture and storage), Tesla and Volkswagen (electric vehicles), and Siemens and Vestas (offshore wind turbines)—approach clean technology development with “open innovation” attributes mixed with “closed” attributes. Although the study finds striking similarities among the particular approaches embraced by each corporate actor, it also notes that approaches are technology and firm specific, and the potential for different permutations leads to an almost endless number of possible stylistic combinations. The innovation profiles depicted also reveal conflict and competition among various stakeholders, the implication being that corporate innovation in the energy sector remains a conflicted, disjointed, and messy process. - Highlights: • Corporate firms remain under-examined in the energy studies literature. • Corporate approaches to clean technology innovation cut across “open” and “closed” attributes. • The corporate innovation profiles depicted reveal elements of conflict and competition.

Development history of the gas turbine modular high temperature reactor

International Nuclear Information System (INIS)

Brey, H.L.

2001-01-01

The development of the high temperature gas cooled reactor (HTGR) as an environmentally agreeable and efficient power source to support the generation of electricity and achieve a broad range of high temperature industrial applications has been an evolutionary process spanning over four decades. This process has included ongoing major development in both the HTGR as a nuclear energy source and associated power conversion systems from the steam cycle to the gas turbine. This paper follows the development process progressively through individual plant designs from early research of the 1950s to the present focus on the gas turbine modular HTGR. (author)

Optimization of wind turbine rotors

Energy Technology Data Exchange (ETDEWEB)

Nygaard, Tor Anders

1999-07-01

The Constrained Steepest Descent method has been applied to the optimization of wind turbine rotors through the development of a numerical model. The model consists of an optimization kernel, an aerodynamic model, a structural dynamic model of a rotating beam, and a cost model for the wind turbine. The cost of energy is minimized directly by varying the blade design, the rotational speed and the resulting design of the drive-train and tower. The aerodynamic model is a combination of a fast engineering model based on strip-theory and two and three-dimensional Euler solvers. The two-dimensional Euler solver is used for generation of pre-stall airfoil data. Comparisons with experimental data verify that the engineering model effectively approximates non-stalled flow, except at the blade tip. The three-dimensional Euler solver is in good agreement with the experimental data at the tip, and is therefore a useful supplement for corrections of the tip-loss model, and evaluation of an optimized design. The structural dynamic model evaluates stresses and deformations for the blade. It is based on constitutive relations for a slender beam that are solved with the equations of motions using a finite-difference method. The cost model evaluates the design change of the wind turbine and the resulting costs that occur when a change in blade design modifies the blade mass and the overall forces. The cost model is based on engineering design rules for the drive-train and tower. The model was applied using a Danish 600 kW wind turbine as a reference. Two rotors were optimized using traditional NACA airfoils and a new low-lift airfoil family developed specifically for wind turbine purposes. The cost of energy decreased four percent for the NACA rotor, and seven percent for the low-lift rotor. Optimizations with a high number of degrees of freedom show that a designer has considerable flexibility in choosing some primary parameters such as rated power and rotor diameter, if the rest

Corporate culture and the culture of the labor collective: the methodology of distinguishing

Directory of Open Access Journals (Sweden)

M. Y. Dmytrenko

2014-07-01

The author points out the content and characteristics of corporate culture and the culture of the staff. The culture of the staff in the Late Modern constellations as well as corporate culture has both similarities and differences. Their common features are due to the influence of mass culture, subculture of the information society, organizational culture. Their differences are primarily of historical and anthropological nature. Corporate culture is defined as the essence of material, spiritual and social values created by the employees of the companies in the course of their activities and which reflect the uniqueness and individuality of this company. The author grounds the statement about the importance of working out methodological criteria for their differentiation.

Gas fired advanced turbine system

Science.gov (United States)

Lecren, R. T.; White, D. J.

The basic concept thus derived from the Ericsson cycle is an intercooled, recuperated, and reheated gas turbine. Theoretical performance analyses, however, showed that reheat at high turbine rotor inlet temperatures (TRIT) did not provide significant efficiency gains and that the 50 percent efficiency goal could be met without reheat. Based upon these findings, the engine concept adopted as a starting point for the gas-fired advanced turbine system is an intercooled, recuperated (ICR) gas turbine. It was found that, at inlet temperatures greater than 2450 F, the thermal efficiency could be maintained above 50%, provided that the turbine cooling flows could be reduced to 7% of the main air flow or lower. This dual and conflicting requirement of increased temperatures and reduced cooling will probably force the abandonment of traditional air cooled turbine parts. Thus, the use of either ceramic materials or non-air cooling fluids has to be considered for the turbine nozzle guide vanes and turbine blades. The use of ceramic components for the proposed engine system is generally preferred because of the potential growth to higher temperatures that is available with such materials.

The path to corporate responsibility.

Science.gov (United States)

Zadek, Simon

2004-12-01

Nike's tagline,"Just do it," is an inspirational call to action for the millions who wear the company's athletic gear. But in terms of corporate responsibility, Nike didn't always follow its own advice. In the 1990s, protesters railed against sweatshop conditions at some of its overseas suppliers and made Nike the global poster child for corporate ethical fecklessness. The intense pressure that activists exerted on the athletic apparel giant forced it to take a long, hard look at corporate responsibility--sooner than it might have otherwise. In this article, Simon Zadek, CEO of the UK-based institute AccountAbility, describes the bumpy route Nike has traveled to get to a better ethical place, one that cultivates and champions responsible business practices. Organizations learn in unique ways, Zadek contends, but they inevitably pass through five stages of corporate responsibility, from defensive ("It's not our fault") to compliance ("We'll do only what we have to") to managerial ("It's the business") to strategic ("It gives us a competitive edge") and, finally, to civil ("We need to make sure everybody does it"). He details Nike's arduous trek through these stages-from the company's initial defensive stance, when accusations about working conditions arose, all the way to its engagement today in the international debate about business's role in society and in public policy. As he outlines this evolution, Zadek offers valuable insights to executives grappling with the challenge of managing responsible business practices. Beyond just getting their own houses in order, the author argues, companies need to stay abreast of the public's evolving ideas about corporate roles and responsibilities. Organizations that do both will engage in what he calls"civil learning".