ANO-2 turbine trip transient test analysis using MMS

International Nuclear Information System (INIS)

Jain, P.K.; Divakaruni, S.M.

1984-01-01

The data from the turbine trip transient tests conducted at the Arkansas Nuclear One-Unit 2 was used as one of the benchmark cases for validating the Modular Modeling System (MMS) Code, developed by the Electric Power Research Institute (EPRI). The data was used first to validate the modules in stand-alone simulation tests and then in a Nuclear Steam Supply system integral tests. This paper presents the results from the MMS simulation effort and compares the code generated results with the plant data as well as RETRAN results. In general, MMS simulation results compare very well with the plant data. The code calculations for the hot and cold leg temperatures, primary system pressure and the pressurizer level are very good compared to RETRAN; however, MMS results for steam generator level compare reasonably well only with RETRAN calculations

Computer analysis on ANO-2 turbine trip test

International Nuclear Information System (INIS)

Senda, Yasuhide; Kanda, Keiji; McDonald, T.A.; Tessier, J.H.; Abramson, P.B.

1983-01-01

Safety analysis for nuclear power plants usually uses so detailed and large codes that it can be expensive and time-consuming. It is preferable to employ a simplified plant model to save cost and time. In this research, using RELAP5, a turbine trip test performed at Arkansas Nuclear One-Unit 2 (ANO-2) was analyzed with the simplified plant model in order to evaluate it for the turbine trip. Before the closure of the Main Steam Isolation Valve (MSIV), the calculation results agree well with the experimental data. After the MSIV closure, the results of the calculation explain the experimental data fairly well except for pressure recovery in the pressurizer. (author)

Detailed analysis of the ANO-2 turbine trip test

International Nuclear Information System (INIS)

McDonald, T.A.; Tessier, J.H.; Senda, Y.; Waterman, M.D.

1983-01-01

A RELAP5/MOD1 (Cycle 18) computer code simulation of the ANO-2 turbine trip test from 98% power level was performed for use in vendor code qualification studies. Results focused on potential improvements to simulation capabilities and plant data acquisition systems to provide meaningful comparisons between the calculations and the test data. The turbine trip test was selected because it resulted in an unplanned sequence of events that broadly affected the plant process systems and their controls. The pressurizer spray valve stuck open at an undetermined flow area, and an atmospheric dump valve remained stuck fully open while several atmospheric dump and secondary side safety valves were unavailable throughout. Thus, although the plant remained always in a safe condition, this transient potentially provided an unusual set of data against which the fidelity of a NSSS simulation by RELAP5/MOD1 along with certain vendor analysis codes might be judged

Validation of the coupled neutron kinetic thermohydraulic code ATHLET/DYN3D with help of measured data of the OECD Turbine Trip Benchmarks. Final report

International Nuclear Information System (INIS)

Grundmann, U.; Kliem, S.

2003-12-01

The project consisted in the validation of the coupled neutron kinetic/thermal hydraulic code system ATHLET/DYN3D for boiling water reactors by the participation at the OECD/NRC turbine trip benchmark. The benchmark defined by the OECD and the American NRC is based on an experiment with closure of the turbine stop valve which was carried out in 1977 in the nuclear power plant Peach Bottom 2 within the framework of a series of 3 experiments. In the experiment, the closure of the valve caused a pressure wave which propagated with attenuation into the reactor core. The condensation of steam in the reactor core caused by the increase of pressure lead to a positive reactivity insertion. The following rise of power was limited by the feedback and the insertion of the control rods. In the frame of the benchmark, the codes could be validated by comparisons with the measured results and the result of the other participants. The benchmark was divided into 3 phases or exercises. Phase I was used for checking the thermo-hydraulic model of the system using a given power release in the core. In phase II, three-dimensional core calculations were performed for given thermal-hydraulic boundary conditions. Coupled calculations were carried out for the selected experiment and four extreme scenarios in the phase III. In the frame of the project, FZR took part in phases II and III of the benchmark. The calculations for phase II were performed with DYN3D by using the assembly discontinuity factors (ADF) and 764 thermal-hydraulic channels (1 channel/assembly). The ATHLET input data set for the coolant system was obtained form the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS). It was slightly modified for the phase III calculations carried out with the parallel coupling of ATHLET and DYN3D. For spatially averaged parameters, a good agreement with the results of measurement and the results of other codes was achieved. The influence of the different models was investigated with the

Probabilistic methods in a study of trip setpoints

International Nuclear Information System (INIS)

Kaulitz, D. E.

2012-01-01

Most early vintage Boiling Water Reactors have a high head and high capacity High Pressure Coolant Injection (HPCI) pump to keep the core covered following a loss of coolant accident (LOCA). However, the protection afforded by the HPCI pump for mitigating a LOCA introduces the potential that a spurious start of the HPCI pump could oversupply the reactor vessel and lead to an automatic trip of the main turbine due to high water level. A turbine trip and associated increase in moderator density could challenge the bases of fuel integrity operating limits. To prevent turbine trip during spurious operation of the HPCI pump, the reactor protection system includes instrumentation and logic to sense high water level and automatically trip the HPCI pump prior to reaching the turbine trip setpoint. This paper describes an analysis that was performed to determine if existing reactor vessel water level trip instrumentation, logic and setpoints result in a high probability that the HPCI pump will trip prior to actuation of the turbine trip. Using nominal values for the initial water level and for the HPCI pump and turbine trip setpoints, and using the probability distribution functions for measurement uncertainty in these setpoints, a Monte Carlo simulation was employed to determine probabilities of successfully tripping the HPCI pump prior to tripping of the turbine. The results of the analysis established that the existing setpoints, instrumentation and logic would be expected to reliably prevent a trip of the main turbine. (authors)

Peach Bottom Turbine Trip Simulations with RETRAN Using INER/TPC BWR Transient Analysis Method

International Nuclear Information System (INIS)

Kao Lainsu; Chiang, Show-Chyuan

2005-01-01

The work described in this paper is benchmark calculations of pressurization transient turbine trip tests performed at the Peach Bottom boiling water reactor (BWR). It is part of an overall effort in providing qualification basis for the INER/TPC BWR transient analysis method developed for the Kuosheng and Chinshan plants. The method primarily utilizes an advanced system thermal hydraulics code, RETRAN02/MOD5, for transient safety analyses. Since pressurization transients would result in a strong coupling effect between core neutronic and system thermal hydraulics responses, the INER/TPC method employs the one-dimensional kinetic model in RETRAN with a cross-section data library generated by the Studsvik-CMS code package for the transient calculations. The Peach Bottom Turbine Trip (PBTT) tests, including TT1, TT2, and TT3, have been successfully performed in the plant and assigned as standards commonly for licensing method qualifications for years. It is an essential requirement for licensing purposes to verify integral capabilities and accuracies of the codes and models of the INER/TPC method in simulating such pressurization transients. Specific Peach Bottom plant models, including both neutronics and thermal hydraulics, are developed using modeling approaches and experiences generally adopted in the INER/TPC method. Important model assumptions in RETRAN for the PBTT test simulations are described in this paper. Simulation calculations are performed with best-estimated initial and boundary conditions obtained from plant test measurements. The calculation results presented in this paper demonstrate that the INER/TPC method is capable of calculating accurately the core and system transient behaviors of the tests. Excellent agreement, both in trends and magnitudes between the RETRAN calculation results and the PBTT measurements, shows reliable qualifications of the codes/users/models involved in the method. The RETRAN calculated peak neutron fluxes of the PBTT

Assessment of full power turbine trip start-up test for C. Trillo 1 with RELAP5/MOD2

International Nuclear Information System (INIS)

Lozano, M.F.; Moreno, P.; de la Cal, C.; Larrea, E.; Lopez, A.; Santamaria, J.G.; Lopez, E.; Novo, M.

1993-07-01

C. Trillo I has developed a model of the plant with RELAP5/MOD2/36.04. This model will be validated against a selected set of start-up tests. One of the transients selected to that aim is the turbine trip, which presents very specific characteristics that make it significantly different from the same transient in other PWRs of different design, the main difference being that the reactor is not tripped: a reduction in primary power is carried out instead. Pre-test calculations were done of the Turbine Trip Test and compared against the actual test. Minor problems in the first model, specially in the Control and Limitation Systems, were identified and post-test calculations had been carried out. The results show a good agreement with data for all the compared variables

Verification of CTF/PARCSv3.2 coupled code in a Turbine Trip scenario

International Nuclear Information System (INIS)

Abarca, A.; Hidalga, P.; Miro, R.; Verdu, G.; Sekhri, A.

2017-01-01

Multiphysics codes had revealed as a best-estimate approach to simulate core behavior in LWR. Coupled neutronics and thermal-hydraulics codes are being used and improved to achieve reliable results for reactor safety transient analysis. The implementation of the feedback procedure between the coupled codes at each time step allows a more accurate simulation and a better prediction of the safety limits of analyzed scenarios. With the objective of testing the recently developed CTF/PARCSv3.2 coupled code, a code-to-code verification against TRACE has been developed in a BWR Turbine Trip scenario. CTF is a thermal-hydraulic subchannel code that features two-fluid, three-field representation of the two-phase flow, while PARCS code solves the neutronic diffusion equation in a 3D nodal distribution. PARCS features allow as well the use of extended sets of cross section libraries for a more precise neutronic performance in different formats like PMAX or NEMTAB. Using this option the neutronic core composition of KKL will be made taking advantage of the core follow database. The results of the simulation will be verified against TRACE results. TRACE will be used as a reference code for the validation process since it has been a recommended code by the USNRC. The model used for TRACE includes a full core plus relevant components such as the steam lines and the valves affecting and controlling the turbine trip evolution. The coupled code performance has been evaluated using the Turbine Trip event that took place in Kern Kraftwerk Leibstadt (KKL), at the fuel cycle 18. KKL is a Nuclear Power Plant (NPP) located in Leibstadt, Switzerland. This NPP operates with a BWR developing 3600 MWt in fuel cycles of one year. The Turbine Trip is a fast transient developing a pressure peak in the reactor followed by a power decreasing due to the selected control rod insertion. This kind of transient is very useful to check the feedback performance between both coupled codes due to the fast

Evaluation of Steam Generator Level behavior for Determination of Turbine Runback rate on COPs trip for Yonggwang 1 and 2 Power Uprating Units

International Nuclear Information System (INIS)

Lee, Kyung Jin; Hwang, Su Hyun; Yoo, Tae Geun; Chung, Soon Il; An, Byung Chang; Park, Jung Gu

2010-01-01

4.5% power uprate project has been progressing for the first time in Yonggwang 1 and 2(YGN1 and 2). Reviews for design change due to the power uprate were accomplished. Steam generator level behavior was one of the most important parameters because it could be cause of reactor trip or turbine trip. As the results of the reviews, YGN1 and 2 had to reassess it for change of turbine runback rate when turbine runback occurs due to the condensate operating pumps (COP) trip. This study has been carried out for evaluating the steam generator level behavior for determination of turbine runback rate on COPs trip for Yonggwang 1 and 2 Power Uprating Units. The steam generator water level evaluation program for YGN1 and 2 (SLEP-Y1) has been developed for it. The program includes models for the steam generator water level response. SLEP-Y1 is programmed with advanced continuous system simulation language (ACSL). The language has been used to simulate physical systems as a commercial tool used to evaluate system designs

Technical evaluation of the proposed deletion of a reactor trip on a turbine trip below 50-percent power for the Beaver Valley nuclear power plant, Unit 1

International Nuclear Information System (INIS)

Reeves, W.E.

1979-12-01

This report documents the technical evaluation of the Duquesne Light Company's proposed license amendment for the deletion of a reactor trip on a turbine trip below 50% power for the Beaver Valley nuclear power plant, Unit 1. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Program being conducted for the US Nuclear Regulatory Commission by Lawrence Livermore Laboratory

Predictive uncertainty reduction in coupled neutron-kinetics/thermal hydraulics modeling of the BWR-TT2 benchmark

Energy Technology Data Exchange (ETDEWEB)

Badea, Aurelian F., E-mail: aurelian.badea@kit.edu [Karlsruhe Institute of Technology, Vincenz-Prießnitz-Str. 3, 76131 Karlsruhe (Germany); Cacuci, Dan G. [Center for Nuclear Science and Energy/Dept. of ME, University of South Carolina, 300 Main Street, Columbia, SC 29208 (United States)

2017-03-15

Highlights: • BWR Turbine Trip 2 (BWR-TT2) benchmark. • Substantial (up to 50%) reduction of uncertainties in the predicted transient power. • 6660 uncertain model parameters were calibrated. - Abstract: By applying a comprehensive predictive modeling methodology, this work demonstrates a substantial (up to 50%) reduction of uncertainties in the predicted total transient power in the BWR Turbine Trip 2 (BWR-TT2) benchmark while calibrating the numerical simulation of this benchmark, comprising 6090 macroscopic cross sections, and 570 thermal-hydraulics parameters involved in modeling the phase-slip correlation, transient outlet pressure, and total mass flow. The BWR-TT2 benchmark is based on an experiment that was carried out in 1977 in the NPP Peach Bottom 2, involving the closure of the turbine stop valve which caused a pressure wave that propagated with attenuation into the reactor core. The condensation of the steam in the reactor core caused by the pressure increase led to a positive reactivity insertion. The subsequent rise of power was limited by the feedback and the insertion of the control rods. The BWR-TT2 benchmark was modeled with the three-dimensional reactor physics code system DYN3D, by coupling neutron kinetics with two-phase thermal-hydraulics. All 6660 DYN3D model parameters were calibrated by applying a predictive modeling methodology that combines experimental and computational information to produce optimally predicted best-estimate results with reduced predicted uncertainties. Simultaneously, the predictive modeling methodology yields optimally predicted values for the BWR total transient power while reducing significantly the accompanying predicted standard deviations.

Predictive uncertainty reduction in coupled neutron-kinetics/thermal hydraulics modeling of the BWR-TT2 benchmark

International Nuclear Information System (INIS)

Badea, Aurelian F.; Cacuci, Dan G.

2017-01-01

Highlights: • BWR Turbine Trip 2 (BWR-TT2) benchmark. • Substantial (up to 50%) reduction of uncertainties in the predicted transient power. • 6660 uncertain model parameters were calibrated. - Abstract: By applying a comprehensive predictive modeling methodology, this work demonstrates a substantial (up to 50%) reduction of uncertainties in the predicted total transient power in the BWR Turbine Trip 2 (BWR-TT2) benchmark while calibrating the numerical simulation of this benchmark, comprising 6090 macroscopic cross sections, and 570 thermal-hydraulics parameters involved in modeling the phase-slip correlation, transient outlet pressure, and total mass flow. The BWR-TT2 benchmark is based on an experiment that was carried out in 1977 in the NPP Peach Bottom 2, involving the closure of the turbine stop valve which caused a pressure wave that propagated with attenuation into the reactor core. The condensation of the steam in the reactor core caused by the pressure increase led to a positive reactivity insertion. The subsequent rise of power was limited by the feedback and the insertion of the control rods. The BWR-TT2 benchmark was modeled with the three-dimensional reactor physics code system DYN3D, by coupling neutron kinetics with two-phase thermal-hydraulics. All 6660 DYN3D model parameters were calibrated by applying a predictive modeling methodology that combines experimental and computational information to produce optimally predicted best-estimate results with reduced predicted uncertainties. Simultaneously, the predictive modeling methodology yields optimally predicted values for the BWR total transient power while reducing significantly the accompanying predicted standard deviations.

The chemical monitoring and control during temporary turbine trip or reactor scram of nuclear power plant

International Nuclear Information System (INIS)

Liu Heng

2012-01-01

During normal operation, a malfunction of equipment or improper operation sometimes results in a turbine trip or reactor scram or even cold shutdown. Because present chemical control strategy and programs aimed at the situation of normal operation and planed refueling outage, no integrate emergency program of radiochemical and chemical control had been developed to focus on this urgent and unexpected situation. After many years of practice and experience feedback, chemists have created an emergency collaborative program of radiochemical and chemical control which aims at these unexpected situations such as unplanned unit down power, turbine trip, or reactor scram. The program defines different radiochemical and chemical control measures and steps during different status to monitor primary loop dose rate variation, fuel assembly integrity and water chemical excursion to prevent components from corrosion. (author)

Analysis of the ANO-2 turbine trip test

International Nuclear Information System (INIS)

McDonald, T.A.; Tessier, J.H.; Senda, Y.; Waterman, M.D.

1983-01-01

The start-up tests performed with the Arkansas Nuclear One-Unit Two (ANO-2) plant provided an opportunity for studying the validity of certain integral systems codes. In particular, the turbine trip from 98.2 percent full power test was investigated with the RELAP5/MOD1 (cycle 18) ode. A detailed plant model was developed and used to understand the test reports. The early depressurization portion of the transient was reproduced; however, the resultant repressurization was not well represented due to uncertainty in the data and plant response. As a result of these computations and detailed analyses of the test data considerable insight was drawn as to the best way to perform and gather data from such integral systems tests for use in code verification studies

Benchmark analysis of three main circulation pump sequential trip event at Ignalina NPP

International Nuclear Information System (INIS)

Uspuras, E.; Kaliatka, A.; Urbonas, R.

2001-01-01

The Ignalina Nuclear Power Plant is a twin-unit with two RBMK-1500 reactors. The primary circuit consists of two symmetrical loops. Eight Main Circulation Pumps (MCPs) at the Ignalina NPP are employed for the coolant water forced circulation through the reactor core. The MCPs are joined in groups of four pumps for each loop (three for normal operation and one on standby). This paper presents the benchmark analysis of three main circulation pump sequential trip event at RBMK-1500 using RELAP5 code. During this event all three MCPs in one circulation loop at Unit 2 Ignalina NPP were tripped one after another, because of inadvertent activation of the fire protection system. The comparison of calculated and measured parameters led us to establish realistic thermal hydraulic characteristics of different main circulation circuit components and to verify the model of drum separators pressure and water level controllers.(author)

Strengthening the First Line of Defence: Delayed Turbine Trip at SCRAM in Westinghouse type NPP's

International Nuclear Information System (INIS)

Van Berlo, Marcel M.A.J.

2015-01-01

The availability of Information, Control and Power (ICP) is not treated as a Critical Safety Function (CSF). After the Forsmark (2006) and Fukushima (2011) incidents there is reason to add ICP as a separate CSF. Adding ICP as a separate CSF would possibly lead to procedural adaptations, or even design changes, for Nuclear Power Plants. As an example, this paper focusses on the transitions immediately after a SCRAM. At a SCRAM in many nuclear power plants the turbine is tripped immediately to prevent the extraction of too much heat from the reactor. However this requires a large and fast transition for the entire secondary system. The rescheduled priorities could lead to the wish NOT to trip the turbine before load has been reduced and alternative power has been secured. This paper discusses a 'soft landing' for the turbine by keeping it running after the SCRAM. Turbine control can follow reactor power by controlling the pressure of the available residual steam from the steam generator. With a proper control design this enables a flexible and precise control of primary temperatures without any fast switching in the secondary system during the first 1/2 to 3 minutes. In this period reactor load and turbine power are smoothly lowered to minimum levels during of which automatic preparatory measures can be triggered. The normal transitions can be initiated in a staged form to provide a soft landing for the entire secondary and electrical system. (author)

An approach of raising the low power reactor trip block (P-7) in Maanshan Power Plant

International Nuclear Information System (INIS)

Wang, L.C.

1984-01-01

The technical specification for the Maanshan Nuclear Power Station (FSAR Table 16.2.2-3) requires that with an increasing reactor power level above the setpoint of low power reactor trip block (P-7), a turbine trip shall initiate a reactor trip. This anticipatory reactor trip on turbine trip prevents the pressurizer PORV from openning during turbine trip event. In order to reduce unnecessary reactor trip due to turbine trip on low reactor power level during Maanshan start-up stage, Taiwan Power Company performed a transient analysis for turbine trip event by using RETRAN code. The highest reactor power level at which a turbine trip will not open the pressurizer PORV is searched. The results demonstrated that this power level can be increased from the original value-10% of the rated thermal power-to about 48% of the rated thermal power

RETRAN-3D MOD003 Peach Bottom Turbine Trip 2 Multidimensional Kinetics Analysis Models and Results

International Nuclear Information System (INIS)

Mori, Michitsugu; Ogura, Katsunori; Gose, Garry C.; Wu, J.-Y.

2003-01-01

An analysis of the Peach Bottom Unit 2 Turbine Trip Test 2 (PB2/TT2) has been performed using RETRAN-3D MOD003. The purpose of the analysis was to investigate the PB2/TT2 overpressurization transient using the RETRAN-3D multidimensional kinetics model

Fault Diagnosis of an Advanced Wind Turbine Benchmark using Interval-based ARRs and Observers

DEFF Research Database (Denmark)

Sardi, Hector Eloy Sanchez; Escobet, Teressa; Puig, Vicenc

2015-01-01

This paper proposes a model-based fault diagnosis (FD) approach for wind turbines and its application to a realistic wind turbine FD benchmark. The proposed FD approach combines the use of analytical redundancy relations (ARRs) and interval observers. Interval observers consider an unknown...... turbine and noise/parameter uncertainty bounds. Fault isolation is based on considering a set of ARRs obtained from the structural analysis of the wind turbine model and a fault signature matrix that considers the relation of ARRs and faults. The proposed FD approach has been validated on a 5-MW wind...

Comparative study of the Peach Bottom turbine trip experiment using two different coupled codes approaches

International Nuclear Information System (INIS)

Bambara, M.; Bousbia-Salah, A.; D'Auria, F.

2005-01-01

Full text of publication follows: In the last years a great concern about the neutron-3D/thermal-hydraulic codes coupling took place. Owing to the improved computational technology, 'best estimate' analyses are today a common tool to assess safety features, and they are necessary if an asymmetric behaviour in the core region exists, or if strong interactions between the core neutronics and reactor thermal-hydraulic occur. In order to validate the coupled codes performances, several international programmes were issued. Among these activities, the OECD/NEA BWR Turbine Trip (TT) was chosen for further sensitivity analyses. It consists of a turbine trip (TT) experiment carried out at the Peach Bottom 2 BWR. In this paper, the results of two different coupled codes systems are summarized and compared. The BWR TT simulations were carried out coupling the thermal-hydraulic system code RELAP5/mode 3.2 to the 3D neutron kinetics code Parcs/2.3, and also the system code ATHLET to the neutronics code QUABOX-CUBBOX. An exhaustive overview of the main features is given, and those aspects, which need further developments and experiences, are pointed out. (authors)

Creating a benchmark of vertical axis wind turbines in dynamic stall for validating numerical models

DEFF Research Database (Denmark)

Castelein, D.; Ragni, D.; Tescione, G.

2015-01-01

An experimental campaign using Particle Image Velocimetry (2C-PIV) technique has been conducted on a H-type Vertical Axis Wind Turbine (VAWT) to create a benchmark for validating and comparing numerical models. The turbine is operated at tip speed ratios (TSR) of 4.5 and 2, at an average chord...

Assessment of the turbine trip transient in Cofrentes NPP with TRAC-BF1

International Nuclear Information System (INIS)

Castrillo, F.; Gomez, A.; Gallego, I.

1993-06-01

This report presents the results of the assessment of TRAC-BF1 (G1-J1) code with the model of C. N. Cofrentes for simulation of the transient originated by the manual trip of the main turbine. C. N. Cofrentes is a General Electric designed BWR/6 plant, with a nominal core thermal power of 2894 Mwt, in commercial operation since 1985, owned and operated by Hidroelectrica Espanola, S. A. The plant incorporates all the characteristics of BWR/6 reactors, with two turbine driven FW pumps. As a result of this assessment a model of C. N. Cofrentes has been developed for TRAC-BF1 that fairly reproduces operational transient behavior of the plant. A special purpose code was generated to obtain reactivity coefficients, as required by TRAC-BF1, from the 3D simulator

Autonomous Voltage Security Regions to Prevent Cascading Trip Faults in Wind Turbine Generators

DEFF Research Database (Denmark)

Niu, Tao; Guo, Qinglai; Sun, Hongbin

2016-01-01

Cascading trip faults in large-scale wind power centralized integration areas bring new challenges to the secure operation of power systems. In order to deal with the complexity of voltage security regions and the computation difficulty, this paper proposes an autonomous voltage security region...... wind farm, an AVSR is determined to guarantee the normal operation of each wind turbine generator (WTG), while in the control center, each region is designed in order to guarantee secure operation both under normal conditions and after an N-1 contingency. A real system in Northern China was used...

Retran simulation of Oyster Creek generator trip startup test

International Nuclear Information System (INIS)

Alammar, M.A.

1987-01-01

RETRAN simulation of Oyster Creek generator trip startup test was carried out as part of Oyster Creek RETRAN model qualification program for reload licensing applications. The objective of the simulation was to qualify the turbine model and its interface with the control valve and bypass systems under severe transients. The test was carried out by opening the main breakers at rated power. The turbine speed governor closed the control valves and the pressure regulator opened the bypass valves within 0.5 sec. The stop valves closed by a no-load turbine trip, before the 10 percent overspeed trip was reached and the reactor scrammed on high APRM neutron flux. The simulation resulted in qualifying a normalized hydraulic torque for the turbine model and a 0.3 sec, delay block for the bypass model to account for the different delays in the hydraulic linkages present in the system. One-dimensional kinetics was used in this simulation

An Evaluation of Fault Tolerant Wind Turbine Control Schemes applied to a Benchmark Model

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob

2014-01-01

Reliability and availability of modern wind turbines increases in importance as the ratio in the world's power supply increases. This is important in order to increase the energy generated per unit and their lowering cost of energy and as well to ensure availability of generated power, which helps...... on this benchmark and is especially good accommodating sensors faults. The two other evaluated solutions do also well accommodating sensors faults, but have some issues which should be worked on, before they can be considered as a full solution to the benchmark problem....

Pre- and post-test analyses of a KKL turbine trip test at 109% power using RETRAN-3D

Energy Technology Data Exchange (ETDEWEB)

Coddington, P

2001-03-01

As part of the PSI/HSK STARS project, pre-test calculations have been performed for a KKL turbine trip test at 109% power using the RETRAN-3D code. In this paper, we first present the results of these calculations, together with a description of the test and a comparison of the results with the measured plant data, and then discuss in more detail the differences between the pre-test results and the plant measurements, including the differences in the initial and boundary conditions, and how these differences influenced the calculated results. Finally, we comment on a series of post-test and sensitivity analyses, which were performed to resolve some of the discrepancies. The results of the pre-test (blind) calculations show good overall agreement with the experimental data, particularly for the maximum in the steam-line mass flow rate following the opening of the turbine bypass valves. This is of critical importance, since the steam-line flow has the least margin to the reactor scram limit. The agreement is especially good since the control rod banks used for the selected rod insertion were changed from those given in the test specification. Following a review of the comparison of the pre-test calculations with the measured data, several deficiencies in the RETRAN-3D model for KKL were identified and corrected as part of the post-test analysis. This allowed for both an improvement in the calculated results, and a deeper understanding of the behaviour of the turbine trip transient. (author)

Pre- and post-test analyses of a KKL turbine trip test at 109% power using RETRAN-3D

International Nuclear Information System (INIS)

Coddington, P.

2001-01-01

As part of the PSI/HSK STARS project, pre-test calculations have been performed for a KKL turbine trip test at 109% power using the RETRAN-3D code. In this paper, we first present the results of these calculations, together with a description of the test and a comparison of the results with the measured plant data, and then discuss in more detail the differences between the pre-test results and the plant measurements, including the differences in the initial and boundary conditions, and how these differences influenced the calculated results. Finally, we comment on a series of post-test and sensitivity analyses, which were performed to resolve some of the discrepancies. The results of the pre-test (blind) calculations show good overall agreement with the experimental data, particularly for the maximum in the steam-line mass flow rate following the opening of the turbine bypass valves. This is of critical importance, since the steam-line flow has the least margin to the reactor scram limit. The agreement is especially good since the control rod banks used for the selected rod insertion were changed from those given in the test specification. Following a review of the comparison of the pre-test calculations with the measured data, several deficiencies in the RETRAN-3D model for KKL were identified and corrected as part of the post-test analysis. This allowed for both an improvement in the calculated results, and a deeper understanding of the behaviour of the turbine trip transient. (author)

Simulation of a turbine trip transient at Embalse NPP with full-circuit CATHENA model

Energy Technology Data Exchange (ETDEWEB)

Rabiti, A., E-mail: arabiti@na-sa.com.ar [Nucleoelectrica Argentina S.A., Embalse Nuclear Power Plant, Engineering Management Branch, Embalse (Argentina); Parrondo, A., E-mail: aparrondo@na-sa.com.ar [Nucleoelectrica Argentina S.A., Engineering Management, Buenos Aires (Argentina); Serrano, P., E-mail: pserrano@na-sa.com.ar [Nucleoelectrica Argentina S.A., Licensing Coordination Branch, Atucha II Project Branch (Unidad de Gestion), Buenos Aires (Argentina); Sablayrolles, A.; Damiani, H., E-mail: asablayrolles@na-sa.com.ar, E-mail: hdamiani@na-sa.com.ar [Nucleoelectrica Argentina S.A., Embalse Nuclear Power Plant, Embalse Life Extension Project Management, Embalse (Argentina)

2015-07-01

Embalse NPP is carrying on a Periodic Safety Review to deal with its life extension. This review includes tasks like Deterministic Analysis review for the Final Safety Analysis Report. In 2011, NA-SA (Nucleoelectrica Argentina S.A.) issued a first CATHENA full-circuit model representing the current plant. This model is used in this work. The simulation presented here corresponds to a turbine trip that occurred at Embalse NPP. Consistency between the simulation and the real event is demonstrated. Furthermore, NASA is currently performing Safety Analysis with a new model developed jointly with AECL and Candu Energy which includes post refurbishment changes and other improvements. (author)

OC3—Benchmark Exercise of Aero-elastic Offshore Wind Turbine Codes

Science.gov (United States)

Passon, P.; Kühn, M.; Butterfield, S.; Jonkman, J.; Camp, T.; Larsen, T. J.

2007-07-01

This paper introduces the work content and status of the first international investigation and verification of aero-elastic codes for offshore wind turbines as performed by the "Offshore Code Comparison Collaboration"(OC3) within the "IEA Wind Annex XXIII - Subtask 2". An overview is given on the state-of-the-art of the concerned offshore wind turbine simulation codes. Exemplary results of benchmark simulations from the first phase of the project are presented and discussed while subsequent phases are introduced. Furthermore, the paper discusses areas where differences between the codes have been identified and the sources of those differences, such as the differing theories implemented into the individual codes. Finally, further research and code development needs are presented based on the latest findings from the current state of the project.

Sensitivity analyses of the peach bottom turbine trip 2 experiment

International Nuclear Information System (INIS)

Bousbia Salah, A.; D'Auria, F.

2003-01-01

In the light of the sustained development in computer technology, the possibilities for code calculations in predicting more realistic transient scenarios in nuclear power plants have been enlarged substantially. Therefore, it becomes feasible to perform 'Best-estimate' simulations through the incorporation of three-dimensional modeling of reactor core into system codes. This method is particularly suited for complex transients that involve strong feedback effects between thermal-hydraulics and kinetics as well as to transient involving local asymmetric effects. The Peach bottom turbine trip test is characterized by a prompt core power excursion followed by a self limiting power behavior. To emphasize and understand the feedback mechanisms involved during this transient, a series of sensitivity analyses were carried out. This should allow the characterization of discrepancies between measured and calculated trends and assess the impact of the thermal-hydraulic and kinetic response of the used models. On the whole, the data comparison revealed a close dependency of the power excursion with the core feedback mechanisms. Thus for a better best estimate simulation of the transient, both of the thermal-hydraulic and the kinetic models should be made more accurate. (author)

Statistical safety evaluation of BWR turbine trip scenario using coupled neutron kinetics and thermal hydraulics analysis code SKETCH-INS/TRACE5.0

International Nuclear Information System (INIS)

Ichikawa, Ryoko; Masuhara, Yasuhiro; Kasahara, Fumio

2012-01-01

The Best Estimate Plus Uncertainty (BEPU) method has been prepared for the regulatory cross-check analysis at Japan Nuclear Energy Safety Organization (JNES) on base of the three-dimensional neutron-kinetics/thermal-hydraulics coupled code SKETCH-INS/TRACE5.0. In the preparation, TRACE5.0 is verified against the large-scale thermal-hydraulic tests carried out with NUPEC facility. These tests were focused on the pressure drop of steam-liquid two phase flow and void fraction distribution. From the comparison of the experimental data with other codes (RELAP5/MOD3.3 and TRAC-BF1), TRACE5.0 was judged better than other codes. It was confirmed that TRACE5.0 has high reliability for thermal hydraulics behavior and are used as a best-estimate code for the statistical safety evaluation. Next, the coupled code SKETCH-INS/TRACE5.0 was applied to turbine trip tests performed at the Peach Bottom-2 BWR4 Plant. The turbine trip event shows the rapid power peak due to the voids collapse with the pressure increase. The analyzed peak value of core power is better simulated than the previous version SKETCH-INS/TRAC-BF1. And the statistical safety evaluation using SKETCH-INS/TRACE5.0 was applied to the loss of load transient for examining the influence of the choice of sampling method. (author)

Turbine trip transient analysis in peach bottom NPP with TRAC-BF1 code and Simtab-1D methodology

International Nuclear Information System (INIS)

Barrachina, T.; Miro, R.; Verdu, G.; Collazo, I.; Gonzalez, P.; Concejal, A.; Ortego, P.; Melara, J.

2010-01-01

In TRAC-BF1 nuclear cross-sections are specified in the input deck in as a polynomial expansion. Therefore, it is necessary to obtain the coefficients of this polynomial function. One of the methods proposed in the literature is the KINPAR methodology. This methodology uses the results from different perturbations of the original state to obtain the coefficients of the polynominal expansion. The simulations are performed using the SIMULATE3 code. In this work, a new methodology to obtain the cross-sections set in 1D is presented. The first step consists of the application of the SIMTAB methodology, developed in UPV, to obtain the 3D cross-sections sets from CASMO4/SIMULATE3. These 3D cross-sections sets are collapsed to 1D, using as a weighting factor the 3D thermal and rapid neutron fluxes obtained from SIMULATE3. The 1D cross-sections obtained are in the same format as the 3D sets, hence, it has been necessary to modify the TRAC-BF1 code in order to be able to read and interpolate between these tabulated 1D cross-sections. With this new methodology it is not necessary to perform simulations of different perturbations of the original state, and also the variation range of the moderator density can be higher than using the former KINPAR methodology. This is important for simulating severe accidents in which the variables vary in a wide range. This new methodology is applied to the simulation of the turbine trip transient Benchmark in Peach Bottom NPP using the TRAC-BF1 code. The results of the transient simulation in TRAC-BF1 using the KINPAR methodology and the new methodology, SIMTAB-1D, are compared. (author)

Turbine protecting device in a BWR type nuclear power plant

International Nuclear Information System (INIS)

Kasuga, Hajime; Oka, Yoko.

1984-01-01

Purpose: To prevent highly humid steams from flowing into the turbine upon abnormal reduction in the reactor water level in order to ensure the turbine soundness, as well as in order to trip the turbine with no undesired effect on the reactor. Constitution: A protection device comprising a judging device and a timer are disposed in a BWR type reactor, in order to control a water level signal from a reactor water level gage. If the reactor water level is reduced during rated power operation, steams are kept to be generated due to decay heat although reactor is scramed. When a signal from the reactor water level detector is inputted to the protection device, a trip signal is outputted by way of a judging device after 15 second by means of the timer, when the main steam check valve is closed to trip the turbine. With this delay of time, abrupt increase in the pressure of the reactor due to sudden shutdown can be prevented. (Nakamoto, H)

Single Point Vulnerability Analysis of Automatic Seismic Trip System

International Nuclear Information System (INIS)

Oh, Seo Bin; Chung, Soon Il; Lee, Yong Suk; Choi, Byung Pil

2016-01-01

Single Point Vulnerability (SPV) analysis is a process used to identify individual equipment whose failure alone will result in a reactor trip, turbine generator failure, or power reduction of more than 50%. Automatic Seismic Trip System (ASTS) is a newly installed system to ensure the safety of plant when earthquake occurs. Since this system directly shuts down the reactor, the failure or malfunction of its system component can cause a reactor trip more frequently than other systems. Therefore, an SPV analysis of ASTS is necessary to maintain its essential performance. To analyze SPV for ASTS, failure mode and effect analysis (FMEA) and fault tree analysis (FTA) was performed. In this study, FMEA and FTA methods were performed to select SPV equipment of ASTS. D/O, D/I, A/I card, seismic sensor, and trip relay had an effect on the reactor trip but their single failure will not cause reactor trip. In conclusion, ASTS is excluded as SPV. These results can be utilized as the basis data for ways to enhance facility reliability such as design modification and improvement of preventive maintenance procedure

Single Point Vulnerability Analysis of Automatic Seismic Trip System

Energy Technology Data Exchange (ETDEWEB)

Oh, Seo Bin; Chung, Soon Il; Lee, Yong Suk [FNC Technology Co., Yongin (Korea, Republic of); Choi, Byung Pil [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

Single Point Vulnerability (SPV) analysis is a process used to identify individual equipment whose failure alone will result in a reactor trip, turbine generator failure, or power reduction of more than 50%. Automatic Seismic Trip System (ASTS) is a newly installed system to ensure the safety of plant when earthquake occurs. Since this system directly shuts down the reactor, the failure or malfunction of its system component can cause a reactor trip more frequently than other systems. Therefore, an SPV analysis of ASTS is necessary to maintain its essential performance. To analyze SPV for ASTS, failure mode and effect analysis (FMEA) and fault tree analysis (FTA) was performed. In this study, FMEA and FTA methods were performed to select SPV equipment of ASTS. D/O, D/I, A/I card, seismic sensor, and trip relay had an effect on the reactor trip but their single failure will not cause reactor trip. In conclusion, ASTS is excluded as SPV. These results can be utilized as the basis data for ways to enhance facility reliability such as design modification and improvement of preventive maintenance procedure.

Flow in Rotating Serpentine Coolant Passages With Skewed Trip Strips

Science.gov (United States)

Tse, David G.N.; Steuber, Gary

1996-01-01

Laser velocimetry was utilized to map the velocity field in serpentine turbine blade cooling passages with skewed trip strips. The measurements were obtained at Reynolds and Rotation numbers of 25,000 and 0.24 to assess the influence of trips, passage curvature and Coriolis force on the flow field. The interaction of the secondary flows induced by skewed trips with the passage rotation produces a swirling vortex and a corner recirculation zone. With trips skewed at +45 deg, the secondary flows remain unaltered as the cross-flow proceeds from the passage to the turn. However, the flow characteristics at these locations differ when trips are skewed at -45 deg. Changes in the flow structure are expected to augment heat transfer, in agreement with the heat transfer measurements of Johnson, et al. The present results show that trips are skewed at -45 deg in the outward flow passage and trips are skewed at +45 deg in the inward flow passage maximize heat transfer. Details of the present measurements were related to the heat transfer measurements of Johnson, et al. to relate fluid flow and heat transfer measurements.

Simulation and verification of transient events in large wind power installations

Energy Technology Data Exchange (ETDEWEB)

Soerensen, P.; Hansen, A.D.; Christensen, P.; Meritz, M.; Bech, J.; Bak-Jensen, B.; Nielsen, H.

2003-10-01

Models for wind power installations excited by transient events have been developed and verified. A number of cases have been investigated, including comparisons of simulations of a three-phase short circuit, validation with measurements of tripping of single wind turbine, islanding of a group of two wind turbines, and voltage steps caused by tripping of wind turbines and by manual transformer tap-changing. A Benchmark model is also presented, enabling the reader to test own simulation results against results obtained with models developed in EMTDC and DIgSILENT. (au)

Heat transfer in rotating serpentine passages with trips normal to the flow

Science.gov (United States)

Wagner, J. H.; Johnson, B. V.; Graziani, R. A.; Yeh, F. C.

1991-01-01

Experiments were conducted to determine the effects of buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. The experiments were conducted with a large scale, multipass, heat transfer model with both radially inward and outward flow. Trip strips on the leading and trailing surfaces of the radial coolant passages were used to produce the rough walls. An analysis of the governing flow equations showed that four parameters influence the heat transfer in rotating passages: coolant-to-wall temperature ratio, Rossby number, Reynolds number, and radius-to-passage hydraulic diameter ratio. The first three of these four parameters were varied over ranges which are typical of advanced gas turbine engine operating conditions. Results were correlated and compared to previous results from stationary and rotating similar models with trip strips. The heat transfer coefficients on surfaces, where the heat increased with rotation and buoyancy, varied by as much as a factor of four. Maximum values of the heat transfer coefficients with high rotation were only slightly above the highest levels obtained with the smooth wall model. The heat transfer coefficients on surfaces, where the heat transfer decreased with rotation, varied by as much as a factor of three due to rotation and buoyancy. It was concluded that both Coriolis and buoyancy effects must be considered in turbine blade cooling designs with trip strips and that the effects of rotation were markedly different depending upon the flow direction.

Simulation and verification of transient events in large wind power installations

DEFF Research Database (Denmark)

Sørensen, Poul Ejnar; Hansen, Anca Daniela; Christensen, P.

2003-01-01

of two wind turbines, and voltage steps caused by tripping of wind turbines and by manual transformer tap-changing. A Benchmark model is also presented, enabling the reader to test own simulation results againstresults obtained with models developed in EMTDC and DIgSILENT. This survey on of generator...

Propagation of void fraction uncertainty measures in the RETRAN-3D simulation of the Peach Bottom turbine trip

International Nuclear Information System (INIS)

Vinai, Paolo; Macian-Juan, Rafael; Chawla, Rakesh

2011-01-01

The paper describes the propagation of void fraction uncertainty, as quantified by employing a novel methodology developed at Paul Scherrer Institut, in the RETRAN-3D simulation of the Peach Bottom turbine trip test. Since the transient considered is characterized by a strong coupling between thermal-hydraulics and neutronics, the accuracy in the void fraction model has a very important influence on the prediction of the power history and, in particular, of the maximum power reached. It has been shown that the objective measures used for the void fraction uncertainty, based on the direct comparison between experimental and predicted values extracted from a database of appropriate separate-effect tests, provides power uncertainty bands that are narrower and more realistic than those based, for example, on expert opinion. The applicability of such an approach to best estimate, nuclear power plant transient analysis has thus been demonstrated.

Evaluation of the root cause for MSR high level trip in Maanshan

International Nuclear Information System (INIS)

Liao, L.-Y.; Ferng, Y.-M.; Jange, S.J.; Ko, C.M.

2004-01-01

Reactor trip due to Moisture Separator Reheater (MSR) high water level has been a long time issue for Maanshan nuclear power plant. The operating experience shows that there are five reactor trips due to MSR high water level. Four out of the five reactor trips are generated when Combined Intermediate valve (CIV) no. 1 is closed during CIV closure test. The fifth reactor trip occurs when the reactor power is increasing from 99% to 100%. An extensive root cause analysis has been performed by Taipower Company. It is concluded that the water accumulated in the cross under leg between the exhaust of high pressure turbine and the inlet of MSR was the water source contributing to the MSR high level trip. Although, Maanshan does not have similar trip after the root cause analysis, it is interested to evaluate the proposed root cause from thermal hydraulic point of view. It is also hoped that some useful guidelines can be established. This paper includes a description of the scenario of reactor trips, a summary of the root cause analysis done by Taipower Company, an examination of possible mechanisms, an identification of key parameters and a presentation of major findings. In addition, the applicability of RELAP5/MOD3 under this condition is discussed. (author)

Estimation of Efficiency of the Cooling Channel of the Nozzle Blade of Gas-Turbine Engines

Science.gov (United States)

Vikulin, A. V.; Yaroslavtsev, N. L.; Zemlyanaya, V. A.

2018-02-01

The main direction of improvement of gas-turbine plants (GTP) and gas-turbine engines (GTE) is increasing the gas temperature at the turbine inlet. For the solution of this problem, promising systems of intensification of heat exchange in cooled turbine blades are developed. With this purpose, studies of the efficiency of the cooling channel of the nozzle blade in the basic modification and of the channel after constructive measures for improvement of the cooling system by the method of calorimetry in a liquid-metal thermostat were conducted. The combined system of heat-exchange intensification with the complicated scheme of branched channels is developed; it consists of a vortex matrix and three rows of inclined intermittent trip strips. The maximum value of hydraulic resistance ξ is observed at the first row of the trip strips, which is connected with the effect of dynamic impact of airflow on the channel walls, its turbulence, and rotation by 117° at the inlet to the channels formed by the trip strips. These factors explain the high value of hydraulic resistance equal to 3.7-3.4 for the first row of the trip strips. The obtained effect was also confirmed by the results of thermal tests, i.e., the unevenness of heat transfer on the back and on the trough of the blade is observed at the first row of the trip strips, which amounts 8-12%. This unevenness has a fading character; at the second row of the trip strips, it amounts to 3-7%, and it is almost absent at the third row. At the area of vortex matrix, the intensity of heat exchange on the blade back is higher as compared to the trough, which is explained by the different height of the matrix ribs on its opposite sides. The design changes in the nozzle blade of basic modification made it possible to increase the intensity of heat exchange by 20-50% in the area of the vortex matrix and by 15-30% on the section of inclined intermittent trip strips. As a result of research, new criteria dependences for the

Fault Tolerant Control of Wind Turbines

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob; Kinnaert, Michel

2013-01-01

This paper presents a test benchmark model for the evaluation of fault detection and accommodation schemes. This benchmark model deals with the wind turbine on a system level, and it includes sensor, actuator, and system faults, namely faults in the pitch system, the drive train, the generator......, and the converter system. Since it is a system-level model, converter and pitch system models are simplified because these are controlled by internal controllers working at higher frequencies than the system model. The model represents a three-bladed pitch-controlled variable-speed wind turbine with a nominal power...

Results of a wind turbine FDI competition

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob

2012-01-01

In this paper some newly published methods for fault detection and isolation developed for a wind turbine benchmark model are tested, compared and evaluated. These methods have been presented as a part of an international competition. The tested methods cover different types of fault detection...... benchmark model....

Residual Generator Fuzzy Identification for Wind TurbineBenchmark Fault Diagnosis

Directory of Open Access Journals (Sweden)

Silvio Simani

2014-11-01

Full Text Available In order to improve the availability of wind turbines, thus improving theirefficiency, it is important to detect and isolate faults in their earlier occurrence. The mainproblem of model-based fault diagnosis applied to wind turbines is represented by thesystem complexity, as well as the reliability of the available measurements. In this work, adata-driven strategy relying on fuzzy models is presented, in order to build a fault diagnosissystem. Fuzzy theory jointly with the Frisch identification scheme for errors-in-variablemodels is exploited here, since it allows one to approximate unknown models and manageuncertain data. Moreover, the use of fuzzy models, which are directly identified from thewind turbine measurements, allows the design of the fault detection and isolation module.It is worth noting that, sometimes, the nonlinearity of a wind turbine system could lead toquite complex analytic solutions. However, IF-THEN fuzzy rules provide a simpler solution,important when on-line implementations have to be considered. The wind turbine benchmarkis used to validate the achieved performances of the suggested fault detection and isolationscheme. Finally, comparisons of the proposed methodology with respect to different faultdiagnosis methods serve to highlight the features of the suggested solution.

A Benchmark Evaluation of Fault Tolerant Wind Turbine Control Concepts

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob

2015-01-01

As the world’s power supply to a larger and larger degree depends on wind turbines, it is consequently and increasingly important that these are as reliable and available as possible. Modern fault tolerant control (FTC) could play a substantial part in increasing reliability of modern wind turbin...... accommodation is handled in software sensor and actuator blocks. This means that the wind turbine controller can continue operation as in the fault free case. The other two evaluated solutions show some potential but probably need improvements before industrial applications....

Validation of RETRAN-03 by simulating a peach bottom turbine trip and boiloff at the full integral simulation test facility

International Nuclear Information System (INIS)

Westacott, J.L.; Peterson, C.E.

1992-01-01

This paper reports that the RETRAN-03 computer code is validated by simulating two tests that were performed at the Full Integral Simulation Test (FIST) facility. The RETRAN-03 results of a turbine trip (test 4PTT1) and failure to maintain water level at decay power (test T1QUV) are compared with the FIST test data. The RETRAN-03 analysis of test 4PTT1 is compared with a previous TRAC-BWR analysis of the test. Sensitivity to various model nodalizations and RETRAN-03 slip options are studied by comparing results of test T1QUV. The predicted thermal-hydraulic responses of both tests agree well with the test data. The pressure response of test 4PTT1 and the boiloff rate for test T1QUV are accurately predicted. Core uncovery time is found to be sensitive to the upper downcomer and upper plenum nodalization. The RETRAN-03 algebraic and dynamic slip options produce similar results for test T1QUV

2nd RCM of the CRP on Benchmark Analyses of Sodium Natural Convection in the Upper Plenum of the Monju Reactor Vessel. Working Material

International Nuclear Information System (INIS)

2010-01-01

The overall objective of the CRP is to improve the Member States’ analytical capabilities in the field of fast reactor in-vessel sodium thermal hydraulics. A necessary condition towards achieving this objective is a wide international validation effort of the data and codes currently employed for the simulation of the various physical effects involved in this field. Therefore, in providing the required wide international basis of interested Member States, each applying different methodologies, the CRP will contribute towards achieving the stated objective with the help of benchmark exercises focusing, in a first stage, on the numerical simulation of temperature stratification of sodium observed in the Monju reactor vessel at a turbine trip test conducted in December 1995 during the original start-up experiments, and with the help of a thorough assessment of the calculation versus measured data comparisons

Numerical Simulations of Vortex Shedding in Hydraulic Turbines

Science.gov (United States)

Dorney, Daniel; Marcu, Bogdan

2004-01-01

Turbomachines for rocket propulsion applications operate with many different working fluids and flow conditions. Oxidizer boost turbines often operate in liquid oxygen, resulting in an incompressible flow field. Vortex shedding from airfoils in this flow environment can have adverse effects on both turbine performance and durability. In this study the effects of vortex shedding in a low-pressure oxidizer turbine are investigated. Benchmark results are also presented for vortex shedding behind a circular cylinder. The predicted results are compared with available experimental data.

Effects of wind turbines on UHF television reception: field tests in Denmark

International Nuclear Information System (INIS)

Sorenson, B.

1992-01-01

As a result of a planning application for a windfarm comprising 20 wind turbines at Tynewydd Farm, Gilfach Goch in Mid Glamorgan, a report discussing any detrimental effects the proposal might have on u.h.f. television reception was produced. In order to make the report as definitive as possible, it was decided to carry out field tests on the exact model of wind turbine to be used at Tynewydd. This required a field trip to Denmark, and the opportunity was taken to make measurements on two other models of turbine at the same time. This report presents the analysis of the results for all three turbines. (author)

Investigation of transient models and performances for a doubly fed wind turbine under a grid fault

DEFF Research Database (Denmark)

Wang, M.; Zhao, B.; Li, H.

2011-01-01

fed induction generator (DFIG), the assessments of the impact on the electrical transient performances were investigated for the doubly fed wind turbine with different representations of wind turbine drive-train dynamics models, different initial operational conditions and different active crowbar...... crowbar on the transient performances of the doubly fed wind turbine were also investigated, with the possible reasonable trip time of crowbar. The investigation have shown that the transient performances are closely correlated with the wind turbine drive train models, initial operational conditions, key...

Transport Risk Index of Physiologic Stability, version II (TRIPS-II): a simple and practical neonatal illness severity score.

Science.gov (United States)

Lee, Shoo K; Aziz, Khalid; Dunn, Michael; Clarke, Maxine; Kovacs, Lajos; Ojah, Cecil; Ye, Xiang Y

2013-05-01

Derive and validate a practical assessment of infant illness severity at admission to neonatal intensive care units (NICUs). Prospective study involving 17,075 infants admitted to 15 NICUs in 2006 to 2008. Logistic regression was used to derive a prediction model for mortality comprising four empirically weighted items (temperature, blood pressure, respiratory status, response to noxious stimuli). This Transport Risk Index of Physiologic Stability, version II (TRIPS-II) was then validated for prediction of 7-day and total NICU mortality. TRIPS-II discriminated 7-day (receiver operating curve [ROC] area, 0.90) and total NICU mortality (ROC area, 0.87) from survival. Furthermore, there was a direct association between changes in TRIPS-II at 12 and 24 hours and mortality. There was good calibration across the full range of TRIPS-II scores and the gestational age at birth, and addition of TRIPS-II improved performance of prediction models that use gestational age and baseline population risk variables. TRIPS-II is a validated benchmarking tool for assessing infant illness severity at admission and for up to 24 hours after. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Effects of wind turbines on UHF television reception: field tests in Denmark, November 1991

International Nuclear Information System (INIS)

Wright, D.T.

1992-01-01

As a result of a planning application for a wind farm comprising 20 wind turbines at Tynewydd Farm, Gilfach Goch in Mid Glamorgan, it became necessary to produce a Report discussing any detrimental effects the proposal might have on UHF television reception. In order to make that Report as definitive as possible, it was decided to carry out field tests on the exact model of wind turbine to be used to Tynewydd. This required a field trip to Denmark, and the opportunity was taken to make measurements on two other models of turbine at the same time. This Report presents the analysis of the results for all three turbines. (Author)

Gas turbine installations in nuclear power plants in Sweden

International Nuclear Information System (INIS)

Sevestedt, Lars

1986-01-01

At each of the four nuclear power stations in Sweden (Ringhals, Forsmark, Oskarshamn, Barsebaeck) gas turbine generating sets have been installed. These units are normally used for peak load operation dictated of grid and System requirements but they are also connected to supply the electrical auxiliary load of the nuclear plant as reserve power sources. The gas turbines have automatic start capability under certain abnormal conditions (such as reactor trips, low frequency grid etc) but they can also be started manually from several different locations. Starting time is approximately 2- 3 minutes from start up to full load. (author)

Gas turbine installations in nuclear power plants in Sweden

Energy Technology Data Exchange (ETDEWEB)

Sevestedt, Lars [Electrical Equipment and Gas Turbines, Swedish State Power Board, Ringhals Nuclear Power Plant, S-430 22 Vaeroebacka (Sweden)

1986-02-15

At each of the four nuclear power stations in Sweden (Ringhals, Forsmark, Oskarshamn, Barsebaeck) gas turbine generating sets have been installed. These units are normally used for peak load operation dictated of grid and System requirements but they are also connected to supply the electrical auxiliary load of the nuclear plant as reserve power sources. The gas turbines have automatic start capability under certain abnormal conditions (such as reactor trips, low frequency grid etc) but they can also be started manually from several different locations. Starting time is approximately 2- 3 minutes from start up to full load. (author)

Field Trips. Beginnings Workshop.

Science.gov (United States)

Cartwright, Sally; Aronson, Susan S.; Stacey, Susan; Winbush, Olga

2001-01-01

Five articles highlight benefits and organization of field trips: (1) "Field Trips Promote Child Learning at Its Best"; (2) "Planning for Maximum Benefit, Minimum Risk"; (3) "Coaching Community Hosts"; (4) "The Story of a Field Trip: Trash and Its Place within Children's Learning and Community"; and (5) "Field Trip Stories and Perspectives" (from…

Turbine-missile casing exit tests

International Nuclear Information System (INIS)

Yoshimura, H.R.; Sliter, G.E.

1978-01-01

Nuclear power plant designers are required to provide safety-related components with adequate protection against hypothetical turbine-missile impacts. In plants with a ''peninsula'' arrangement, protection is provided by installing the turbine axis radially from the reactor building, so that potential missile trajectories are not in line with the plant. In plants with a ''non-peninsula'' arrangement (turbine axis perpendicular to a radius), designers rely on the low probability of a missile strike and on the protection provided by reinforced concrete walls in order to demonstrate an adequate level of protection USNRC Regulatory Guide 1.115). One of the critical first steps in demonstrating adequacy is the determination of the energy and spin of the turbine segments as they exit the turbine casing. The spin increases the probability that a subsequent impact with a protective barrier will be off-normal and therefore less severe than the normal impact assumed in plant designs. Two full-scale turbine-missile casing exit tests which were conducted by Sandia Laboratories at their rocket-sled facility in Albuquerque, New Mexico, are described. Because of wide variations in turbine design details, postulated failure conditions, and missile exit scenarios, the conditions for the two tests were carefully selected to be as prototypical as possible, while still maintaining the well-controlled and well-characterized test conditions needed for generating benchmark data

Karhunen Loeve Basis Used for Detection of Gearbox Faults in a Wind Turbine

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Stoustrup, Jakob

2014-01-01

Reliability and sustainability of wind turbines increase in importance as wind turbines contribute with increasing power generation to the world's power grids. One possible way to achieve this is by using advanced fault detection and isolation methods in wind turbines based on the measurements...... provided to the control system. In this paper a Karhunen-Loeve basis approach is designed for detecting changes in frequency response from rotating parts like a gearbox. The potential of this method is shown by applying it to an established Wind Turbine FDI and FTC Benchmark model. These faults...

Benchmarking Benchmarks

NARCIS (Netherlands)

D.C. Blitz (David)

2011-01-01

textabstractBenchmarking benchmarks is a bundle of six studies that are inspired by the prevalence of benchmarking in academic finance research as well as in investment practice. Three studies examine if current benchmark asset pricing models adequately describe the cross-section of stock returns.

Some Observations on the Subset Simulation Related to the Wind Turbine Mechanics

DEFF Research Database (Denmark)

Sichani, Mahdi Teimouri; Nielsen, Søren R.K.; Thoft-Christensen, Palle

2012-01-01

systems. It is interesting to determine applicability of the Subset Simulation (SS) techniques, as a powerful representative of Variance Reduction Monte Carlo (VRMC) methods, on the wind turbine systems specifically with an active controller. Hence in this paper we apply and discuss these methods...... on a benchmark wind turbine model and analyze the results in view of their applicability....

Results of the benchmark for blade structural models, part A

DEFF Research Database (Denmark)

Lekou, D.J.; Chortis, D.; Belen Fariñas, A.

2013-01-01

A benchmark on structural design methods for blades was performed within the InnWind.Eu project under WP2 “Lightweight Rotor” Task 2.2 “Lightweight structural design”. The present document is describes the results of the comparison simulation runs that were performed by the partners involved within...... Task 2.2 of the InnWind.Eu project. The benchmark is based on the reference wind turbine and the reference blade provided by DTU [1]. "Structural Concept developers/modelers" of WP2 were provided with the necessary input for a comparison numerical simulation run, upon definition of the reference blade...

Analysis of Turbine Load Rejection for APR1400 using SPACE

Energy Technology Data Exchange (ETDEWEB)

Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon [KEPCO Engineering and Construction Co. Ltd., Deajeon (Korea, Republic of)

2016-10-15

Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses.

Analysis of Turbine Load Rejection for APR1400 using SPACE

International Nuclear Information System (INIS)

Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon

2016-01-01

Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses

TRIP RATES FOR CONDOMINIUM CONSTRUCTION PROJECT

Directory of Open Access Journals (Sweden)

Wirach Hirun

2015-01-01

Full Text Available The number of large scale condominium construction projects had dramatically increased in Bangkok. Many projects had occurred in either densely populated areas or in central business districts, where traffic conditions were usually highly congested. To prevent traffic problems, a traffic impact study must be prepared and submitted for review by concerned public authorities. Unit trip generation rates were important data in traffic impact analysis. Without accurate unit trip generation rates, public agencies could not obtain accurate information on the traffic that will be generated. This study aimed to study trip rates and the factors affecting them for condominium construction project in Bangkok. The data were collected from 30 condominium construction sites located in 15 districts of Bangkok. The analysis used the linear regression method and was divided into three cases: 1 trip rates for all vehicles, 2 trip rates for classified vehicles, and 3 trip rates for all types of condominium. All case analyses considered weekdays, Saturday, and Sunday. The results found that trip rates related to the number of dwellings in the condominium. The trip rates for all vehicle types on weekdays, Saturday, and Sunday were 10.636, 4.647, and 9.294 vehicles per 100 dwelling units per day respectively. The trip rates for six-wheeled and ten-wheeled trucks on weekdays, Saturday, and Sunday were 2.046, 0.975, and 0.575 vehicles per 100 dwelling units per day respectively. The trip rate for four-wheeled trucks and passenger cars on weekdays was 1.960. Regarding condominium types, the trip rate for low rise condominiums for all vehicle types on weekdays was 5.315 while the trip rates for high rise condominiums for weekdays, Saturday, and Sunday were 3.965, 2.667, and 1.261 respectively.

Dual turbine power plant and a reheat steam bypass flow control system for use therein

International Nuclear Information System (INIS)

Braytenbah, A.S.; Jaegtnes, K.O.

1977-01-01

An electric power plant having dual turbine-generators connected to a steam source that includes a high temperature gas cooled nuclear reactor is described. Each turbine comprises a high pressure portion operated by superheat steam and an intermediate-low pressure portion operated by reheat steam; a bypass line is connected across each turbine portion to permit a desired minimum flow of steam from the source at times when the combined flow of steam through the turbine is less than the minimum. Coolant gas is propelled through the reactor by a circulator which is driven by an auxiliary turbine which uses steam exhausted from the high pressure portions and their bypass lines. The pressure of the reheat steam is controlled by a single proportional-plus-integral controller which governs the steam flow through the bypass lines associated with the intermediate-low pressure portions. At times when the controller is not in use its output signal is limited to a value that permits an unbiased response when pressure control is resumed, as in event of a turbine trip. 25 claims, 2 figures

Healthy Ride Trip Data

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A dataset that shows trips taken using the Healthy Ride system by quarter. The dataset includes bike number, membership type, trip start and end timestamp, and...

Nuclear reactor trip system

International Nuclear Information System (INIS)

Cook, B.M.

1982-01-01

Each parameter of the processes of a nuclear reactor and components operatively associated with it is monitored by a set of four like sensors. A trip system normally operates on a ''two out four'' configuration; i.e., to trip the reactor it is necessary that at least two sensors of a set sense an off-normal parameter. This assumes that all sensors are in normal operating condition. However, when a sensor is in test or is subject to maintenance or is defective or disabled, the ''two out of four''configuration would be reduced to a ''one out of three'' configuration because the affected sensor is taken out of service. This would expose the system to the possibility that a single sensor failure, which may be spurious, will cause a trip of the reactor. To prevent this, it is necessary that the affected sensor be bypassed. If only one sensor is bypassed, the system operates on a ''two out of three'' configuration. With two sensors bypassed, the sensing of an off-normal parameter by a third sensor trips the reactor. The by-pass circuit also disables the circuit coupling the by-passed sensor to the trip circuit. (author)

Benchmarking Simulation of Long Term Station Blackout Events

International Nuclear Information System (INIS)

Kim, Sung Kyum; Lee, John C.; Fynan, Douglas A.; Lee, John C.

2013-01-01

The importance of passive cooling systems has emerged since the SBO events. Turbine-driven auxiliary feedwater (TD-AFW) system is the only passive cooling system for steam generators (SGs) in current PWRs. During SBO events, all alternating current (AC) and direct current (DC) are interrupted and then the water levels of steam generators become high. In this case, turbine blades could be degraded and cannot cool down the SGs anymore. To prevent this kind of degradations, improved TD-AFW system should be installed for current PWRs, especially OPR 1000 plants. A long-term station blackout (LTSBO) scenario based on the improved TD-AFW system has been benchmarked as a reference input file. The following task is a safety analysis in order to find some important parameters causing the peak cladding temperature (PCT) to vary. This task has been initiated with the benchmarked input deck applying to the State-of-the-Art Reactor Consequence Analyses (SOARCA) Report. The point of the improved TD-AFW is to control the water level of the SG by using the auxiliary battery charged by a generator connected with the auxiliary turbine. However, this battery also could be disconnected from the generator. To analyze the uncertainties of the failure of the auxiliary battery, the simulation for the time-dependent failure of the TD-AFW has been performed. In addition to the cases simulated in the paper, some valves (e. g., pressurizer safety valve), available during SBO events in the paper, could be important parameters to assess uncertainties in PCTs estimated. The results for these parameters will be included in a future study in addition to the results for the leakage of the RCP seals. After the simulation of several transient cases, alternating conditional expectation (ACE) algorithm will be used to derive functional relationships between the PCT and several system parameters

Benchmarking

OpenAIRE

Meylianti S., Brigita

1999-01-01

Benchmarking has different meaning to different people. There are five types of benchmarking, namely internal benchmarking, competitive benchmarking, industry / functional benchmarking, process / generic benchmarking and collaborative benchmarking. Each type of benchmarking has its own advantages as well as disadvantages. Therefore it is important to know what kind of benchmarking is suitable to a specific application. This paper will discuss those five types of benchmarking in detail, includ...

Trip internalization in multi-use developments.

Science.gov (United States)

2014-04-01

Internal trip capture refers to how the number trips to and from a development are reduced by the proximity of : complementary land uses within the development (e.g., residential to retail). Internal trips occur within the : development and do not en...

Power supply trip control for nuclear reactor

International Nuclear Information System (INIS)

Hager, R.E.; Gutman, Jerzy.

1987-01-01

A control system for a trip coil in a switchgear mechanism controls the supply of electrical power to a process control device and ensures de-energization of the trip coil shortly after the trip coil is energized. The trip coil is energized not by an independent dc source as in prior art, but from rectified power from a step down transformer supplied from the switchgear output side. The transformer feeds a rectifier which is connected to the trip coil via a trip activation device. The output of the rectifier can be monitored using an optical converter to determine the ability of the control system to activate the trip coil and the condition of the power supplied to the process control device. The control device may be a rod positioner in a pressurised water nuclear reactor. (author)

TRACE/PARCS modelling of rips trip transients for Lungmen ABWR

Energy Technology Data Exchange (ETDEWEB)

Chang, C. Y. [Inst. of Nuclear Engineering and Science, National Tsing-Hua Univ., No.101, Kuang-Fu Road, Hsinchu 30013, Taiwan (China); Lin, H. T.; Wang, J. R. [Inst. of Nuclear Energy Research, No. 1000, Wenhua Rd., Longtan Township, Taoyuan County 32546, Taiwan (China); Shih, C. [Inst. of Nuclear Engineering and Science, Dept. of Engineering and System Science, National Tsing-Hua Univ., No.101, Kuang-Fu Road, Hsinchu 30013, Taiwan (China)

2012-07-01

The objectives of this study are to examine the performances of the steady-state results calculated by the Lungmen TRACE/PARCS model compared to SIMULATE-3 code, as well as to use the analytical results of the final safety analysis report (FSAR) to benchmark the Lungmen TRACE/PARCS model. In this study, three power generation methods in TRACE were utilized to analyze the three reactor internal pumps (RIPs) trip transient for the purpose of validating the TRACE/PARCS model. In general, the comparisons show that the transient responses of key system parameters agree well with the FSAR results, including core power, core inlet flow, reactivity, etc. Further studies will be performed in the future using Lungmen TRACE/PARCS model. After the commercial operation of Lungmen nuclear power plant, TRACE/PARCS model will be verified. (authors)

Fault Detection of Wind Turbines with Uncertain Parameters: A Set-Membership Approach

Directory of Open Access Journals (Sweden)

Thomas Bak

2012-07-01

Full Text Available In this paper a set-membership approach for fault detection of a benchmark wind turbine is proposed. The benchmark represents relevant fault scenarios in the control system, including sensor, actuator and system faults. In addition we also consider parameter uncertainties and uncertainties on the torque coefficient. High noise on the wind speed measurement, nonlinearities in the aerodynamic torque and uncertainties on the parameters make fault detection a challenging problem. We use an effective wind speed estimator to reduce the noise on the wind speed measurements. A set-membership approach is used generate a set that contains all states consistent with the past measurements and the given model of the wind turbine including uncertainties and noise. This set represents all possible states the system can be in if not faulty. If the current measurement is not consistent with this set, a fault is detected. For representation of these sets we use zonotopes and for modeling of uncertainties we use matrix zonotopes, which yields a computationally efficient algorithm. The method is applied to the wind turbine benchmark problem without and with uncertainties. The result demonstrates the effectiveness of the proposed method compared to other proposed methods applied to the same problem. An advantage of the proposed method is that there is no need for threshold design, and it does not produce positive false alarms. In the case where uncertainty on the torque lookup table is introduced, some faults are not detectable. Previous research has not addressed this uncertainty. The method proposed here requires equal or less detection time than previous results.

A subchannel and CFD analysis of void distribution for the BWR fuel bundle test benchmark

International Nuclear Information System (INIS)

In, Wang-Kee; Hwang, Dae-Hyun; Jeong, Jae Jun

2013-01-01

Highlights: ► We analyzed subchannel void distributions using subchannel, system and CFD codes. ► The mean error and standard deviation at steady states were compared. ► The deviation of the CFD simulation was greater than those of the others. ► The large deviation of the CFD prediction is due to interface model uncertainties. -- Abstract: The subchannel grade and microscopic void distributions in the NUPEC (Nuclear Power Engineering Corporation) BFBT (BWR Full-Size Fine-Mesh Bundle Tests) facility have been evaluated with a subchannel analysis code MATRA, a system code MARS and a CFD code CFX-10. Sixteen test series from five different test bundles were selected for the analysis of the steady-state subchannel void distributions. Four test cases for a high burn-up 8 × 8 fuel bundle with a single water rod were simulated using CFX-10 for the microscopic void distribution benchmark. Two transient cases, a turbine trip without a bypass as a typical power transient and a re-circulation pump trip as a flow transient, were also chosen for this analysis. It was found that the steady-state void distributions calculated by both the MATRA and MARS codes coincided well with the measured data in the range of thermodynamic qualities from 5 to 25%. The results of the transient calculations were also similar to each other and very reasonable. The CFD simulation reproduced the overall radial void distribution trend which produces less vapor in the central part of the bundle and more vapor in the periphery. However, the predicted variation of the void distribution inside the subchannels is small, while the measured one is large showing a very high concentration in the center of the subchannels. The variations of the void distribution between the center of the subchannels and the subchannel gap are estimated to be about 5–10% for the CFD prediction and more than 20% for the experiment

Simulation of the turbine trip of Unit 1 of the Laguna Verde nuclear power plant using the code Simulate-3K

International Nuclear Information System (INIS)

Alegria A, A.; Filio L, C.; Ortiz V, J.

2017-09-01

In order to compare the results obtained from the model developed in the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) with the code Simulate-3K (S3K) with respect to those reported by the process computer of the Central (SIIP), the simulation of the turbine trip transient was carried out, caused by the firing of the main generator, the low differential pressure of oil of its seals and the automatic Scram of Unit 1 of the Laguna Verde nuclear power plant, at 87% of power nominal during the operation cycle 16. Since the reactor was brought to a safe stop due to Scram, was enough to simulate 20 seconds to observe the maximum increase in pressure with S3K. In this work, the following parameters are shown and compared: the neutron flux, the thermal power, the pressure in the dome, the flow at the entrance to the core, the steam flow that leaves the vessel and the minimal critical power ratio (MCPR). The neutron flux of the average power range monitors of the nuclear power plant was compared with the S3K detectors model. Finally, the MCPR was calculated with a different correlation to that of the fuel supplier and its deviation from its safety limit was determined. In conclusion, the results obtained show the current state of the model for the simulation of reactivity transients and the opportunity areas to consolidate this tool in support of the process of licensing refueling in the CNSNS. (Author)

Guam Commercial Purchases (Trip Ticket)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — DAWR collects Trip Ticket or purchase invoice data from vendors that buy fish directly from the fishermen. Similar to the trip ticket system in Saipan, this is a...

Accuracy of an efficient framework for structural analysis of wind turbine blades

DEFF Research Database (Denmark)

Blasques, José Pedro Albergaria Amaral; Bitsche, Robert D.; Fedorov, Vladimir

2016-01-01

-section analysis tool is able to capture the effects stemming from material anisotropy and inhomogeneity for sections of arbitrary geometry. The proposed framework is very efficient and therefore ideally suited for integration within wind turbine aeroelastic design and analysis tools. A number of benchmark......This paper presents a novel framework for the structural design and analysis of wind turbine blades and establishes its accuracy. The framework is based on a beam model composed of two parts—a 2D finite element-based cross-section analysis tool and a 3D beam finite element model. The cross...... examples are presented comparing the results from the proposed beam model to 3D shell and solid finite element models. The examples considered include a square prismatic beam, an entire wind turbine rotor blade and a detailed wind turbine blade cross section. Phenomena at both the blade length scale...

Wind Turbine Condition Monitoring Strategy through Multiway PCA and Multivariate Inference

Directory of Open Access Journals (Sweden)

Francesc Pozo

2018-03-01

Full Text Available This article states a condition monitoring strategy for wind turbines using a statistical data-driven modeling approach by means of supervisory control and data acquisition (SCADA data. Initially, a baseline data-based model is obtained from the healthy wind turbine by means of multiway principal component analysis (MPCA. Then, when the wind turbine is monitorized, new data is acquired and projected into the baseline MPCA model space. The acquired SCADA data are treated as a random process given the random nature of the turbulent wind. The objective is to decide if the multivariate distribution that is obtained from the wind turbine to be analyzed (healthy or not is related to the baseline one. To achieve this goal, a test for the equality of population means is performed. Finally, the results of the test can determine that the hypothesis is rejected (and the wind turbine is faulty or that there is no evidence to suggest that the two means are different, so the wind turbine can be considered as healthy. The methodology is evaluated on a wind turbine fault detection benchmark that uses a 5 MW high-fidelity wind turbine model and a set of eight realistic fault scenarios. It is noteworthy that the results, for the presented methodology, show that for a wide range of significance, α ∈ [ 1 % , 13 % ] , the percentage of correct decisions is kept at 100%; thus it is a promising tool for real-time wind turbine condition monitoring.

Reevaluation of steam generator level trip set point

Energy Technology Data Exchange (ETDEWEB)

Shim, Yoon Sub; Soh, Dong Sub; Kim, Sung Oh; Jung, Se Won; Sung, Kang Sik; Lee, Joon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1994-06-01

The reactor trip by the low level of steam generator water accounts for a substantial portion of reactor scrams in a nuclear plant and the feasibility of modification of the steam generator water level trip system of YGN 1/2 was evaluated in this study. The study revealed removal of the reactor trip function from the SG water level trip system is not possible because of plant safety but relaxation of the trip set point by 9 % is feasible. The set point relaxation requires drilling of new holes for level measurement to operating steam generators. Characteristics of negative neutron flux rate trip and reactor trip were also reviewed as an additional work. Since the purpose of the trip system modification for reduction of a reactor scram frequency is not to satisfy legal requirements but to improve plant performance and the modification yields positive and negative aspects, the decision of actual modification needs to be made based on the results of this study and also the policy of a plant owner. 37 figs, 6 tabs, 14 refs. (Author).

Evaluation on an influence to turbine generator installed on a concrete foundation structure affected by alkali-silica reaction

International Nuclear Information System (INIS)

Takeo Takakura; Takashi Momoo; Shigeru Harada; Yoshihisa Asai; Takashi Hosokawa

2005-01-01

A turbine generator to be evaluated is a one with 566 MW capacity installed on a reinforced concrete supporting structure having a table deck portion where equipments are installed and columns to support on the table deck. After the initial operation of this turbine generator started, a difference from the initial setting at an installation stage was found at turbine generator in the annual inspection on 1979. The turbine generator foundation (herein after TG foundation) had expanded mainly longitudinal direction, and it was confirmed this expansion occurred due to affected by Alkali-Silica reaction (herein after ASR) according to concrete core samples tests. The measurement for TG foundation such as displacements started at this time. On the other hand, bearing metal temperatures and shaft vibration for the turbine generator have been continuously monitored by supervisory from initial operation. No abnormal alarm or trips by extraordinary metal temperature or axle vibration of the turbine generator due to TG foundation expansion affected by ASR have been arisen. However it is required to confirm sounding of this turbine generator in order to safely operation. The purpose of this paper checked and examined allowable capacity of turbine generator and TG foundation, in order to operate continuously and safely. (authors)

ICARUS trip

CERN Document Server

Caraban Gonzalez, Noemi

2017-01-01

It’s lived in two different countries and is about to make its way to a third. It’s the largest machine of its kind, designed to find extremely elusive particles and tell us more about them. Its pioneering technology is the blueprint for some of the most advanced science experiments in the world. And this summer, it will travel across the Atlantic Ocean to its new home (and its new mission) at the U.S. Department of Energy’s Fermi National Accelerator Laboratory. It’s called ICARUS, and you can follow its journey over land and sea with the help of an interactive map at IcarusTrip.fnal.gov (link is external), or on Facebook (link is external), Twitter (link is external) and Instagram (link is external) using the hashtag #IcarusTrip.

Procedural Aspects of Compulsory Licensing Under TRIPS

DEFF Research Database (Denmark)

Wested, Jakob; Minssen, Timo

2017-01-01

and discussion addressed the framework and context for CL provided by the TRIPS convention. Both the specific requirements enshrined in TRIPS art 31 and the broader objectives and principles enshrined in TRIPS, e.g. transfer and dissemination of technology (art 7), protection of public health (art 8......In 2013, Indian authorities granted a compulsory license to NATCO Pharmaceuticals for a patented pharmaceutical product sold by Bayer. This decision raised several complex issues regarding the grant a CL and their consistency with the principles and objectives of TRIPS. Furthermore, in January 2017...

The return trip is felt shorter only postdictively: A psychophysiological study of the return trip effect [corrected].

Directory of Open Access Journals (Sweden)

Ryosuke Ozawa

Full Text Available The return trip often seems shorter than the outward trip even when the distance and actual time are identical. To date, studies on the return trip effect have failed to confirm its existence in a situation that is ecologically valid in terms of environment and duration. In addition, physiological influences as part of fundamental timing mechanisms in daily activities have not been investigated in the time perception literature. The present study compared round-trip and non-round-trip conditions in an ecological situation. Time estimation in real time and postdictive estimation were used to clarify the situations where the return trip effect occurs. Autonomic nervous system activity was evaluated from the electrocardiogram using the Lorenz plot to demonstrate the relationship between time perception and physiological indices. The results suggest that the return trip effect is caused only postdictively. Electrocardiographic analysis revealed that the two experimental conditions induced different responses in the autonomic nervous system, particularly in sympathetic nervous function, and that parasympathetic function correlated with postdictive timing. To account for the main findings, the discrepancy between the two time estimates is discussed in the light of timing strategies, i.e., prospective and retrospective timing, which reflect different emphasis on attention and memory processes. Also each timing method, i.e., the verbal estimation, production or comparative judgment, has different characteristics such as the quantification of duration in time units or knowledge of the target duration, which may be responsible for the discrepancy. The relationship between postdictive time estimation and the parasympathetic nervous system is also discussed.

Web-based turbine cycle performance analysis for nuclear power plants

International Nuclear Information System (INIS)

Heo, Gyun Young; Lee, Sung Jin; Chang, Soon Heung; Choi, Seong Soo

2000-01-01

As an approach to improve the economical efficiency of operating nuclear power plants, a thermal performance analysis tool for steam turbine cycle has been developed. For the validation and the prediction of the signals used in thermal performance analysis, a few statistical signal processing techniques are integrated. The developed tool provides predicted performance calculation capability that is steady-state wet steam turbine cycle simulation, and measurement performance calculation capability which determines component- and cycle-level performance indexes. Web-based interface with all performance analysis is implemented, so even remote users can achieve performance analysis. Comparing to ASME PTC6 (Performance Test Code 6), the focusing point of the developed tool is historical performance analysis rather than single accurate performance test. The proposed signal processing techniques are validated using actual plant signals, and turbine cycle models are tested by benchmarking with a commercial thermal analysis tool

Improving plant availability by predicting reactor trips

International Nuclear Information System (INIS)

Frank, M.V.; Epstein, S.A.

1986-01-01

Management Ahnalysis Company (MAC) has developed and applied two complementary software packages called RiTSE and RAMSES. Together they provide an mini-computer workstation for maintenance and operations personnel to dramatically reduce inadvertent reactor trips. They are intended to be used by those responsible at the plant for authorizing work during operation (such as a clearance coordinator or shift foreman in U.S. plants). They discover and represent all components, processes, and their interactions that could case a trip. They predict if future activities at the plant would cause a reactor trip, provide a reactor trip warning system and aid in post-trip cause analysis. RAMSES is a general reliability engineering software package that uses concepts of artificial intelligence to provide unique capabilities on personal and mini-computers

Application of an improved PSO algorithm to optimal tuning of PID gains for water turbine governor

International Nuclear Information System (INIS)

Fang Hongqing; Chen Long; Shen Zuyi

2011-01-01

In this paper, an improved particle swarm optimization (IPSO) algorithm is proposed. Besides the individual best position and the global best position, a nominal average position of the swarm is introduced in IPSO. The performance of IPSO is compared to different PSO variants with five well-known benchmark functions. The experimental results show that the proposed IPSO algorithm improves the searching performance on the benchmark functions. And then, IPSO, as well as other PSO variants, is applied to optimal tuning of Proportional-Integral-Derivative (PID) gains for a typical PID control system of water turbine governor. The computer simulation results of an actual hydro power plant in China show that IPSO algorithm has stable convergence characteristic and good computational ability, and it is an effective and easily implemented method for optimal tuning of PID gains of water turbine governor.

Aggregated wind power plant models consisting of IEC wind turbine models

DEFF Research Database (Denmark)

Altin, Müfit; Göksu, Ömer; Hansen, Anca Daniela

2015-01-01

The common practice regarding the modelling of large generation components has been to make use of models representing the performance of the individual components with a required level of accuracy and details. Owing to the rapid increase of wind power plants comprising large number of wind...... turbines, parameters and models to represent each individual wind turbine in detail makes it necessary to develop aggregated wind power plant models considering the simulation time for power system stability studies. In this paper, aggregated wind power plant models consisting of the IEC 61400-27 variable...... speed wind turbine models (type 3 and type 4) with a power plant controller is presented. The performance of the detailed benchmark wind power plant model and the aggregated model are compared by means of simulations for the specified test cases. Consequently, the results are summarized and discussed...

Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory

International Nuclear Information System (INIS)

Wang, Lin; Liu, Xiongwei; Renevier, Nathalie; Stables, Matthew; Hall, George M.

2014-01-01

Due to the increasing size and flexibility of large wind turbine blades, accurate and reliable aeroelastic modelling is playing an important role for the design of large wind turbines. Most existing aeroelastic models are linear models based on assumption of small blade deflections. This assumption is not valid anymore for very flexible blade design because such blades often experience large deflections. In this paper, a novel nonlinear aeroelastic model for large wind turbine blades has been developed by combining BEM (blade element momentum) theory and mixed-form formulation of GEBT (geometrically exact beam theory). The nonlinear aeroelastic model takes account of large blade deflections and thus greatly improves the accuracy of aeroelastic analysis of wind turbine blades. The nonlinear aeroelastic model is implemented in COMSOL Multiphysics and validated with a series of benchmark calculation tests. The results show that good agreement is achieved when compared with experimental data, and its capability of handling large deflections is demonstrated. Finally the nonlinear aeroelastic model is applied to aeroelastic modelling of the parked WindPACT 1.5 MW baseline wind turbine, and reduced flapwise deflection from the nonlinear aeroelastic model is observed compared to the linear aeroelastic code FAST (Fatigue, Aerodynamics, Structures, and Turbulence). - Highlights: • A novel nonlinear aeroelastic model for wind turbine blades is developed. • The model takes account of large blade deflections and geometric nonlinearities. • The model is reliable and efficient for aeroelastic modelling of wind turbine blades. • The accuracy of the model is verified by a series of benchmark calculation tests. • The model provides more realistic aeroelastic modelling than FAST (Fatigue, Aerodynamics, Structures, and Turbulence)

Trip generation and data analysis study.

Science.gov (United States)

2015-09-01

Through the Trip Generation and Data Analysis Study, the District of Columbia Department of : Transportation (DDOT) is undertaking research to better understand multimodal urban trip generation : at mixed-use sites in the District. The study is helpi...

Benchmark Analyses of Sodium Natural Convection in the Upper Plenum of the Monju Reactor Vessel. Final Report of a Coordinated Research Project 2008-2012

International Nuclear Information System (INIS)

2014-11-01

The IAEA supports Member States in the area of advanced fast reactor technology development by providing a major fulcrum for information exchange and collaborative research programmes. The IAEA’s activities in this field are mainly carried out within the framework of the Technical Working Group on Fast Reactors (TWG-FR), which assists in the implementation of corresponding IAEA support, and ensures that all technical activities are in line with expressed needs of Member States. Among this broad range, the IAEA proposes and establishes coordinated research projects (CRPs), aimed at improving Member State capability in fast reactor design and analysis. An important opportunity to perform collaborative research activities was provided by the system startup tests carried out by the Japan Atomic Energy Agency (JAEA) in the prototype loop type sodium cooled fast reactor Monju, in particular a turbine trip test performed in December 1995. As the JAEA opened the experimental dataset to international collaboration in 2008, the IAEA launched the CRP on Benchmark Analyses of Sodium Natural Convection in the Upper Plenum of the Monju Reactor Vessel. The CRP, together with eight institutes from seven States, has contributed to improving capabilities in sodium cooled fast reactors simulation through code verification and validation, with particular emphasis on thermal stratification and natural circulation phenomena

Trip generation characteristics of special generators

Science.gov (United States)

2010-03-01

Special generators are introduced in the sequential four-step modeling procedure to represent certain types of facilities whose trip generation characteristics are not fully captured by the standard trip generation module. They are also used in the t...

Results of neutronic benchmark analysis for a high temperature reactor of the GT-MHR type - HTR2008-58107

International Nuclear Information System (INIS)

Boyarinov, V. F.; Bryzgalov, V. I.; Davidenko, V. D.; Fomichenko, P. A.; Glushkov, E. S.; Gomin, E. A.; Gurevich, M. I.; Kodochigov, N. G.; Marova, E. V.; Mitenkova, E. F.; Novikov, N. V.; Osipov, S. L.; Sukharev, Y. P.; Tsibulsky, V. F.; Yudkevich, M. S.

2008-01-01

The paper presents a description of benchmark cases, achieved results, analysis of possible reasons of differences of calculation results obtained by various neutronic codes. The comparative analysis is presented showing the benchmark-results obtained with reference and design codes by Russian specialists (WIMS-D, JAR-HTGR, UNK, MCU, MCNP5-MONTEBURNS1.0-ORIGEN2.0), by French specialists (AP0LL02, TRIP0LI4 codes), and by Korean specialists (HELIOS, MASTER, MCNP5 codes). The analysis of possible reasons for deviations was carried out, which was aimed at the decrease of uncertainties in calculated characteristics. This additional investigation was conducted with the use of 2D models of a fuel assembly cell and a reactor plane section. (authors)

Field Trips as Valuable Learning Experiences in Geography Courses

Science.gov (United States)

Krakowka, Amy Richmond

2012-01-01

Field trips have been acknowledged as valuable learning experiences in geography. This article uses Kolb's (1984) experiential learning model to discuss how students learn and how field trips can help enhance learning. Using Kolb's experiential learning theory as a guide in the design of field trips helps ensure that field trips contribute to…

Fellows in the Middle: Fabulous Field Trips

Science.gov (United States)

West, Mary Lou

2008-05-01

Montclair State University's NSF GK-12 Program focuses on grades 7 and 8 in five urban public school districts in northern New Jersey. Each year four fieldtrips are taken by the students, middle school teachers, and graduate student Fellows. Many interdisciplinary hands-on lessons are written for use before, during and after each trip with this year's theme of Earth history. The Sterling Hill Mine trip evoked lessons on geology, economics, crystal structure, density, and pH. A virtual trip (webcam link) to scientists in the rainforest of Panama prompted critical thinking, categorizing layers and animals, and construction of model food webs. In the field trip to the NJ School of Conservation the students will build model aquifers, measure tree heights, and measure stream flow to compare to their Hackensack River. Finally the students will travel to MSU for a Math/Science Day with research talks, lab tours, hands-on activities, and a poster session. In January 2008 seventeen teachers, Fellows, and grant personnel took a field trip to China to set up collaborations with researchers and schools in Beijing and Xi'an, including the Beijing Ancient Observatory. All field trips are fabulous! Next year (IYA) our theme will be planetary science and will feature field trips to the Newark Museum's Dreyfuss Planetarium, BCC Buehler Challenger & Science Center, and star parties. We look forward to invigorating middle school science and mathematics with exciting astronomy. Funded by NSF #0638708

Expert system for the CPCS-initiated trip analysis

International Nuclear Information System (INIS)

Sohn, Sedo; Im, Inyoung; Kuh, Jungeui

1991-01-01

In Yonggwang nuclear units 3 and 4, the core protection calculator system (CPCS) performs various protection logics against many transients and certain accidents. The CPCS is a real-time computer system calculating the departure from nucleate boiling ratio (DNBR), and local power density, and other protection logics. It takes process variables such as neutron flux, hot-leg temperature, cold-leg temperature, control element assembly positions, and reactor coolant pump shaft speed. Since the CPCS protection logics are quite complex, it is difficult for an operator to tell immediately which parameter is the major cause of the reactor trip. Thus, whenever the reactor trip signal is generated, the process input variables and calculated results, including selected intermediate variables, are frozen in the specified computer memory for later analysis. These frozen variables are called the trip buffer. Analysis of the trip buffer requires an expert in the CPCS and related documents containing algorithms and a data base for algorithms. The Trip Buffer Analysis Program (TBAP) is an expert system that pinpoints the causes of the CPCS initiated reactor trip, thus relieving the operator from the burden of analyzing the trip buffer

How combined trip purposes are associated with transport choice for short distance trips. Results from a cross-sectional study in the Netherlands.

Directory of Open Access Journals (Sweden)

Eline Scheepers

Full Text Available One way to increase physical activity is to stimulate a shift from car use to walking or cycling. In single-purpose trips, purpose was found to be an important predictor of transport choice. However, as far as known, no studies have been conducted to see how trips with combined purposes affect this decision. This study was designed to provide insight into associations between combined purposes and transport choice.An online questionnaire (N = 3,663 was used to collect data concerning transport choice for four primary purposes: shopping, going to public natural spaces, sports, and commuting. Per combination of primary trip purpose and transport choice, participants were asked to give examples of secondary purposes that they combine with the primary purpose. Logistic regression analyses were used to model the odds of both cycling and walking versus car use.Primary trip purposes combined with commuting, shopping, visiting private contacts or medical care were more likely to be made by car than by cycling or walking. Combinations with visiting catering facilities, trips to social infrastructure facilities, recreational outings, trips to facilities for the provision of daily requirements or private contacts during the trip were more likely to be made by walking and/or cycling than by car.Combined trip purposes were found to be associated with transport choice. When stimulating active transport focus should be on the combined-trip purposes which were more likely to be made by car, namely trips combined with commuting, other shopping, visiting private contacts or medical care.

Using GIS for planning field trips: In-situ assessment of Geopoints for field trips with mobile devices

Science.gov (United States)

Böhm, Sarah; Kisser, Thomas; Ditter, Raimund

2016-04-01

Up to now no application is existing for collecting data via mobile devices using a geographical information system referring to the evaluation of Geopoints. Classified in different geographical topics a Geopark can be rated for suitability of Geopoints for field trips. The systematically acquisition of the suitability of Geopoints is necessary, especially when doing field trips with lower grade students who see a physical-geographic phenomenon for the first time. For this reason, the development of such an application is an invention for easy handling evaluations of Geopoints on the basis of commonly valid criteria like esthetic attraction, interestingness, and pithiness (Streifinger 2010). Collecting data provides the opportunity of receiving information of particularly suitable Geopoints out of the sight from students, tourists and others. One solution for collecting data in a simple and intuitive form is Survey123 for ArcGIS (http://survey123.esri.com/#/). You can create surveys using an ArcGIS Online organizational account and download your own survey or surveys "that may have been shared with you" (https://itunes.apple.com/us/app/survey-123-for-arcgis/id993015031?mt=8) on your mobile device. "Once a form is downloaded, you will be able to start collecting data."(https://itunes.apple.com/us/app/survey-123-for-arcgis/id993015031?mt=8) Free of cost and use while disconnected the application can easily be used via mobile device on field trips. On a 3-day field trip which is held three times per year in the Geopark Bergstraße-Odenwald Survey123 is being used to evaluate the suitability of different Geopoints for different topics (geology, soils, vegetation, climate). With every field trip about 25 students take part in the survey and evaluate each Geopoint at the route. So, over the time, the docents know exactly which Geopoints suites perfect for teaching geology for example, and why it suites that good. The field trip is organized in an innovative way. Before

28 CFR 570.45 - Violation of escorted trip.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Violation of escorted trip. 570.45 Section 570.45 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE COMMUNITY PROGRAMS AND RELEASE COMMUNITY PROGRAMS Escorted Trips § 570.45 Violation of escorted trip. (a) Staff shall process as...

Observing Trip Chain Characteristics of Round-Trip Carsharing Users in China: A Case Study Based on GPS Data in Hangzhou City

Directory of Open Access Journals (Sweden)

Ying Hui

2017-06-01

Full Text Available Carsharing as a means to provide individuals with access to automobiles to complete a personal trip has grown significantly in recent years in China. However, there are few case studies based on operational data to show the role carsharing systems play in citizens’ daily trips. In this study, vehicle GPS data of a round-trip carsharing system in Hangzhou, China was used to describe the trip chain characteristics of users. For clearer delineation of carshare usage, the car use time length of all observations chosen in the study was within 24 h or less. Through data preprocessing, a large pool (26,085 of valid behavior samples was obtained, and several trip chaining attributes were selected to describe the characteristics. The pool of observations was then classified into five clusters, with each cluster having significant differences in one or two trip chain characteristics. The cluster results reflected that different use patterns exist. By a comparative analysis with trip survey data in Hangzhou, differences in trip chain characteristics exist between carsharing and private cars, but in some cases, shared vehicles can be a substitute for private cars to satisfy motorized travel. The proposed method could facilitate companies in formulating a flexible pricing strategy and determining target customers. In addition, traffic administration agencies could have a deeper understanding of the position and function of various carsharing modes in an urban transportation system.

Hydraulic design and optimization of a modular pump-turbine runner

International Nuclear Information System (INIS)

Schleicher, W.C.; Oztekin, A.

2015-01-01

Highlights: • A modular pumped-storage scheme using elevated water storage towers is investigated. • The pumped-storage scheme also aides in the wastewater treatment process. • A preliminary hydraulic pump-turbine runner design is created based on existing literature. • The preliminary design is optimized using a response surface optimization methodology. • The performance and flow fields between preliminary and optimized designs are compared. - Abstract: A novel modular pumped-storage scheme is investigated that uses elevated water storage towers and cement pools as the upper and lower reservoirs. The scheme serves a second purpose as part of the wastewater treatment process, providing multiple benefits besides energy storage. A small pumped-storage scheme has been shown to be a competitive energy storage solution for micro renewable energy grids; however, pumped-storage schemes have not been implemented on scales smaller than megawatts. Off-the-shelf runner designs are not available for modular pumped-storage schemes, so a custom runner design is sought. A preliminary hydraulic design for a pump-turbine runner is examined and optimized for increased pumping hydraulic efficiency using a response surface optimization methodology. The hydraulic pumping efficiency was found to have improved by 1.06% at the best efficiency point, while turbine hydraulic efficiency decreased by 0.70% at the turbine best efficiency point. The round-trip efficiency for the system was estimated to be about 78%, which is comparable to larger pumped-storage schemes currently in operation

Field Trip - Conservation of Carnivores in Namibia

Science.gov (United States)

Gibson, Amanda

2017-04-01

Field trips are a key component of our curriculum at ISWB. Classroom teaching is invaluable but field trips provide pupils with a tangible connection to pertinent issues of conservation. ISWB realises the importance of out of the classroom learning in field trips and to this end our students have an opportunity to partake in a number of 3-5 day field trips per academic year. In 2016, several Year 8, 9, 10, 11 and 12 students visited the AfriCat Foundation on Okonjima in central Namibia for 4 days to learn about the conservation of the predator population in Namibia. The trips were very successful and another trip this year to AfriCat North close to Etosha National Park, where the students will work closely with the local farming communities, is planned. AfriCat provides Environmental Education programmes for the youth of Namibia giving them a greater understanding of the importance of wildlife conservation. Their main objective is promoting predator and environmental awareness amongst the youth of Namibia. AfriCat Environmental Education Programme is based on 1997 UNESCO-UNEP Environmental Education objectives. "Attitudes: To raise concern about problems, values, personal responsibility and willingness to participate/act. In the end, we conserve only what we love. We will love only what we understand. We will understand only what we are taught."

Detection of aeroacoustic sound sources on aircraft and wind turbines

International Nuclear Information System (INIS)

Oerlemans, S.

2009-01-01

This thesis deals with the detection of aeroacoustic sound sources on aircraft and wind turbines using phased microphone arrays. First, the reliability of the array technique is assessed using airframe noise measurements in open and closed wind tunnels. It is demonstrated that quantitative acoustic measurements are possible in both wind tunnels. Then, the array technique is applied to characterize the noise sources on two modern large wind turbines. It is shown that practically all noise emitted to the ground is produced by the outer part of the blades during their downward movement. This asymmetric source pattern, which causes the typical swishing noise during the passage of the blades, can be explained by trailing edge noise directivity and convective amplification. Next, a semi-empirical prediction method is developed for the noise from large wind turbines. The prediction code is successfully validated against the experimental results, not only with regard to sound levels, spectra, and directivity, but also with regard to the noise source distribution in the rotor plane and the temporal variation in sound level (swish). The validated prediction method is then applied to calculate wind turbine noise footprints, which show that large swish amplitudes can occur even at large distance. The influence of airfoil shape on blade noise is investigated through acoustic wind tunnel tests on a series of wind turbine airfoils. Measurements are carried out at various wind speeds and angles of attack, with and without upstream turbulence and boundary layer tripping. The speed dependence, directivity, and tonal behaviour are determined for both trailing edge noise and inflow turbulence noise. Finally, two noise reduction concepts are tested on a large wind turbine: acoustically optimized airfoils and trailing edge serrations. Both blade modifications yield a significant trailing edge noise reduction at low frequencies, but also cause increased tip noise at high frequencies

Evidence, explanations, and recommendations for teachers' field trip strategies

Science.gov (United States)

Rebar, Bryan

Field trips are well recognized by researchers as an educational approach with the potential to complement and enhance classroom science teaching by exposing students to unique activities, resources, and content in informal settings. The following investigation addresses teachers' field trip practices in three related manuscripts: (1) A study examining the details of teachers' pedagogical strategies intended to facilitate connections between students' experiences and the school curricula while visiting an aquarium; (2) A study documenting and describing sources of knowledge that teachers draw from when leading field trips to an aquarium; (3) A position paper that reviews and summarizes research on effective pedagogical strategies for field trips. Together these three pieces address key questions regarding teachers' practices on field trips: (1) What strategies are teachers employing (and not employing) during self-guided field trips to facilitate learning tied to the class curriculum? (2) What sources of knowledge do teachers utilize when leading field trips? (3) How can teachers be better prepared to lead trips that promote learning? The Oregon Coast Aquarium served as the field trip site for teachers included in this study. The setting suited these questions because the aquarium serves tens of thousands of students on field trips each year but provides no targeted programming for these students as they explore the exhibits. In other words, the teachers who lead field trips assume much of the responsibility for facilitating students' experience. In order to describe and characterize teachers' strategies to link students' experiences to the curriculum, a number of teachers (26) were observed as they led their students' visit to the public spaces of the aquarium. Artifacts, such as worksheets, used during the visit were collected for analysis as well. Subsequently, all teachers were surveyed regarding their use of the field trip and their sources of knowledge for

Fault Diagnosis and Fault Tolerant Control with Application on a Wind Turbine Low Speed Shaft Encoder

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Sardi, Hector Eloy Sanchez; Escobet, Teressa

2015-01-01

tolerant control of wind turbines using a benchmark model. In this paper, the fault diagnosis scheme is improved and integrated with a fault accommodation scheme which enables and disables the individual pitch algorithm based on the fault detection. In this way, the blade and tower loads are not increased...

SINGLE PHASE ANALYTICAL MODELS FOR TERRY TURBINE NOZZLE

Energy Technology Data Exchange (ETDEWEB)

Zhao, Haihua; Zhang, Hongbin; Zou, Ling; O' Brien, James

2016-11-01

benchmarked with CFD simulations. The analytical models generally agree well with the experimental data and CFD simulations. The analytical models are suitable for implementation into a reactor system analysis code or severe accident code as part of mechanistic and dynamical models to understand the RCIC behaviors. The cases with two-phase flow at the turbine inlet will be pursued in future work.

Elementary school children's science learning from school field trips

Science.gov (United States)

Glick, Marilyn Petty

This research examines the impact of classroom anchoring activities on elementary school students' science learning from a school field trip. Although there is prior research demonstrating that students can learn science from school field trips, most of this research is descriptive in nature and does not examine the conditions that enhance or facilitate such learning. The current study draws upon research in psychology and education to create an intervention that is designed to enhance what students learn from school science field trips. The intervention comprises of a set of "anchoring" activities that include: (1) Orientation to context, (2) Discussion to activate prior knowledge and generate questions, (3) Use of field notebooks during the field trip to record observations and answer questions generated prior to field trip, (4) Post-visit discussion of what was learned. The effects of the intervention are examined by comparing two groups of students: an intervention group which receives anchoring classroom activities related to their field trip and an equivalent control group which visits the same field trip site for the same duration but does not receive any anchoring classroom activities. Learning of target concepts in both groups was compared using objective pre and posttests. Additionally, a subset of students in each group were interviewed to obtain more detailed descriptive data on what children learned through their field trip.

Microstructure characterization of Friction Stir Spot Welded TRIP steel

DEFF Research Database (Denmark)

Lomholt, Trine Colding; Adachi, Yoshitaka; Peterson, Jeremy

2012-01-01

Transformation Induced Plasticity (TRIP) steels have not yet been successfully joined by any welding technique. It is desirable to search for a suitable welding technique that opens up for full usability of TRIP steels. In this study, the potential of joining TRIP steel with Friction Stir Spot...

Austenite stability in TRIP steels studied by synchrotron radiation

NARCIS (Netherlands)

Blondé, R.

2014-01-01

TRIP steel is a material providing great mechanical properties. Such steels show a good balance between high-strength and ductility, not only as a result of the fine microstructure, but also because of the well-known TRIP effect. The Transformation Induced-Plasticity (TRIP) phenomenon is the

Fault Detection of Wind Turbines with Uncertain Parameters

DEFF Research Database (Denmark)

Tabatabaeipour, Seyed Mojtaba; Odgaard, Peter Fogh; Bak, Thomas

2012-01-01

on the torque coefficient. High noise on the wind speed measurement, nonlinearities in the aerodynamic torque and uncertainties on the parameters make fault detection a challenging problem. We use an effective wind speed estimator to reduce the noise on the wind speed measurements. A set-membership approach...... is detected. For representation of these sets we use zonotopes and for modeling of uncertainties we use matrix zonotopes, which yields a computationally efficient algorithm. The method is applied to the wind turbine benchmark problem without and with uncertainties. The result demonstrates the effectiveness...

Multi-Destination and Multi-Purpose Trip Effects in the Analysis of the Demand for Trips to a Remote Recreational Site

Science.gov (United States)

Martínez-Espiñeira, Roberto; Amoako-Tuffour, Joe

2009-06-01

One of the basic assumptions of the travel cost method for recreational demand analysis is that the travel cost is always incurred for a single purpose recreational trip. Several studies have skirted around the issue with simplifying assumptions and dropping observations considered as nonconventional holiday-makers or as nontraditional visitors from the sample. The effect of such simplifications on the benefit estimates remains conjectural. Given the remoteness of notable recreational parks, multi-destination or multi-purpose trips are not uncommon. This article examines the consequences of allocating travel costs to a recreational site when some trips were taken for purposes other than recreation and/or included visits to other recreational sites. Using a multi-purpose weighting approach on data from Gros Morne National Park, Canada, we conclude that a proper correction for multi-destination or multi-purpose trip is more of what is needed to avoid potential biases in the estimated effects of the price (travel-cost) variable and of the income variable in the trip generation equation.

A model for TRIP steel constitutive behaviour

NARCIS (Netherlands)

Perdahcioglu, Emin Semih; Geijselaers, Hubertus J.M.; Menari, G

2011-01-01

A constitutive model is developed for TRIP steel. This is a steel which contains three or four different phases in its microstructure. One of the phases in TRIP steels is metastable austenite (Retained Austenite) which transforms to martensite upon deformation. The accompanying transformation strain

Transforming an Exposure trip to Botanical Expedition: Introducing Ecological Research thru Exposure Trip in an Eco-tourism Site

Directory of Open Access Journals (Sweden)

Bernardo C. Lunar

2014-10-01

Full Text Available – Fieldtrips can be considered as one of the three avenues through which science can be taught - through formal classroom teaching, practical work and field trips. An exposure trip at Bangkong Kahoy Valley Field Study Center was arranged for a class of BS Biology and BS Education students enrolled in Ecology Course. This approach purposefully transformed the usual exposure trip from being a casual site visit into a focused and productive learning experience. This transformation from exposure trip to a botanical expedition has exceeded the initial activity goals. Rather than a day off from learning, the time spent at the study center has been a meaningful opportunity to engage students in an active ecological research project while delivering valuable science content. Employing the descriptive survey design, the learning gains of the students were assessed and students were directed to do a guided reflection writing using the ORID Model of Focused Conversation. The learning gains and reflections of the students confirmed that students can collaboratively develop focused research questions, make meaning from a variety of sources, carry out a vegetation analysis and conduct surveys on socio-economic status, plant resource utilization and ecotourism assessment of the host community. As students prepared for their trip and synthesized their learning afterward, they were able to come up with very impressive and scientifically sound research outputs.

Independent deterministic analysis of the operational event with turbine valve closure and one atmospheric dump valve stuck open

International Nuclear Information System (INIS)

Rijova, N.

2007-01-01

The paper presents the results of the independent analysis of the operational event which took place on 07.11.2003 at Unit 1 of Rostov NPP. The event started with switching off the electrical generator of the turbine due to a short cut at the local switching substation. The turbine isolating valves closed to prevent damage of the turbine. The condenser dump valves (BRU-K) and the atmospheric dump valves (BRU-A) opened to release the vapour generated in the steam generators. After the pressure decrease in the steam generators BRU-K and BRU-A closed but one valve stuck opened. The emergency core cooling system was activated automatically. The main circulation pump of the loop corresponding to the steam generator with the stuck BRU-A was tripped. The stuck valve was closed by the operational stuff manually. No safety limits were violated. The analysis of the event was carried out using ATHLET code. A reasonable agreement was achieved between the calculated and measured values. (author)

Trip electrical circuit of the gyrotion

International Nuclear Information System (INIS)

Rossi, J.O.

1987-09-01

The electron cyclotron resonance heating system of INPE/LAP is shown and the trip electrical circuit of the gyrotron is described, together with its fundamental aspects. The trip electrical circuit consists basically of a series regulator circuit which regulates the output voltage level and controls the pulse width time. Besides that, a protection circuit for both tubes, regulator and gyrotron, against faults in the system. (author) [pt

Complementary, substitution, and independence among tourist trips

NARCIS (Netherlands)

Middelkoop, van M.; Borgers, A.W.J.; Timmermans, H.J.P.

1999-01-01

The relationship between day trips, short breaks (2-4 days), and holidays (5+ days) has never been examined at the level of the individual consumer because surveys on day and overnight trips are typically conducted independently. In this article, both the stated and the inferred relationship between

Preliminary Two-Phase Terry Turbine Nozzle Models for RCIC Off-Design Operation Conditions

Energy Technology Data Exchange (ETDEWEB)

Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Brien, James [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-06-12

This report presents the effort to extend the single-phase analytical Terry turbine model to cover two-phase off-design conditions. The work includes: (1) adding well-established two-phase choking models – the Isentropic Homogenous Equilibrium Model (IHEM) and Moody’s model, and (2) theoretical development and implementation of a two-phase nozzle expansion model. The two choking models provide bounding cases for the two-phase choking mass flow rate. The new two-phase Terry turbine model uses the choking models to calculate the mass flow rate, the critical pressure at the nozzle throat, and steam quality. In the divergent stage, we only consider the vapor phase with a similar model for the single-phase case by assuming that the liquid phase would slip along the wall with a much slower speed and will not contribute the impulse on the rotor. We also modify the stagnation conditions according to two-phase choking conditions at the throat and the cross-section areas for steam flow at the nozzle throat and at the nozzle exit. The new two-phase Terry turbine model was benchmarked with the same steam nozzle test as for the single-phase model. Better agreement with the experimental data is observed than from the single-phase model. We also repeated the Terry turbine nozzle benchmark work against the Sandia CFD simulation results with the two-phase model for the pure steam inlet nozzle case. The RCIC start-up tests were simulated and compared with the single-phase model. Similar results are obtained. Finally, we designed a new RCIC system test case to simulate the self-regulated Terry turbine behavior observed in Fukushima accidents. In this test, a period inlet condition for the steam quality varying from 1 to 0 is applied. For the high quality inlet period, the RCIC system behaves just like the normal operation condition with a high pump injection flow rate and a nominal steam release rate through the turbine, with the net addition of water to the primary system; for

Self-benchmarking Guide for Cleanrooms: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Sartor, Dale; Tschudi, William

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Propagation of the trip behavior in the VENUS vertex chamber

International Nuclear Information System (INIS)

Ohama, Taro; Yamada, Yoshikazu.

1995-03-01

The high voltage system of the VENUS vertex chamber occasionally trips by a discharge somewhere among cathode electrodes during data taking. This trip behavior induces often additional trips at other electrodes such as the skin and the grid electrodes in the vertex chamber. This propagation mechanism of trips is so complicated in this system related with multi-electrodes. Although the vertex chamber is already installed inside the VENUS detector and consequently the discharge is not able to observe directly, a trial to estimate the propagation has been done using only the information which appears around the trip circuits and the power supply of the vertex chamber. (author)

Language Travel or Language Tourism: Have Educational Trips Changed So Much?

Science.gov (United States)

Laborda, Jesus Garcia

2007-01-01

This article points out the changes in organization, students and language learning that language trips, as contrasted with educational trips (of which language trips are a subgroup) have gone through in the last years. The article emphasizes the need to differentiate between language trips and language tourism based on issues of additional…

Active fault tolerance control of a wind turbine system using an unknown input observer with an actuator fault

Directory of Open Access Journals (Sweden)

Li Shanzhi

2018-03-01

Full Text Available This paper proposes a fault tolerant control scheme based on an unknown input observer for a wind turbine system subject to an actuator fault and disturbance. Firstly, an unknown input observer for state estimation and fault detection using a linear parameter varying model is developed. By solving linear matrix inequalities (LMIs and linear matrix equalities (LMEs, the gains of the unknown input observer are obtained. The convergence of the unknown input observer is also analysed with Lyapunov theory. Secondly, using fault estimation, an active fault tolerant controller is applied to a wind turbine system. Finally, a simulation of a wind turbine benchmark with an actuator fault is tested for the proposed method. The simulation results indicate that the proposed FTC scheme is efficient.

Multiple Turbine Wakes

DEFF Research Database (Denmark)

Machefaux, Ewan; Mann, Jakob

and to obtain an estimate of the wake expansion in a fixed frame of reference. A comparison of selected datasets from the campaign showed good far wake agreements of mean wake expansion with Actuator Line CFD computations and simpler engineering models. An empirical relationship, relating maximum wake induction...... for modeling the resulting double wake deficit is only relevant at high turbine thrust coefficients. For high wind speed and low thrust coefficient, linear summation should be primarily used. The first iteration of a new engineering model capable of modeling the overlapped wake deficit is formulated and its...... measurement and simulation is seen in both the fixed and the meandering frame of reference. A benchmark of several wake accumulation models is performed as a basis for the subsequent development of an engineering model for wake interaction.Finally, the validated numerical CFD model is used as part...

A Trip to the Zoo: Children's Words and Photographs.

Science.gov (United States)

DeMarie, Darlene

Field trips are a regular part of many programs for young children. Field trips can serve a variety of purposes, such as exposing children to new things or helping children to see familiar things in new ways. The purpose of this study was to learn the meaning children gave to a field trip. Cameras were made available to each of the children in a…

Benchmarking local healthcare-associated infections: Available benchmarks and interpretation challenges

Directory of Open Access Journals (Sweden)

Aiman El-Saed

2013-10-01

Full Text Available Summary: Growing numbers of healthcare facilities are routinely collecting standardized data on healthcare-associated infection (HAI, which can be used not only to track internal performance but also to compare local data to national and international benchmarks. Benchmarking overall (crude HAI surveillance metrics without accounting or adjusting for potential confounders can result in misleading conclusions. Methods commonly used to provide risk-adjusted metrics include multivariate logistic regression analysis, stratification, indirect standardization, and restrictions. The characteristics of recognized benchmarks worldwide, including the advantages and limitations are described. The choice of the right benchmark for the data from the Gulf Cooperation Council (GCC states is challenging. The chosen benchmark should have similar data collection and presentation methods. Additionally, differences in surveillance environments including regulations should be taken into consideration when considering such a benchmark. The GCC center for infection control took some steps to unify HAI surveillance systems in the region. GCC hospitals still need to overcome legislative and logistic difficulties in sharing data to create their own benchmark. The availability of a regional GCC benchmark may better enable health care workers and researchers to obtain more accurate and realistic comparisons. Keywords: Benchmarking, Comparison, Surveillance, Healthcare-associated infections

Steam Turbine Control Valve Stiction Effect on Power System Stability

International Nuclear Information System (INIS)

Halimi, B.

2010-01-01

One of the most important problems in power system dynamic stability is low frequency oscillations. This kind of oscillation has significant effects on the stability and security of the power system. In some previous papers, a fact was introduced that a steam pressure continuous fluctuation in turbine steam inlet pipeline may lead to a kind of low frequency oscillation of power systems. Generally, in a power generation plant, steam turbine system composes of some main components, i.e. a boiler or steam generator, stop valves, control valves and turbines that are connected by piping. In the conventional system, the turbine system is composed with a lot of stop and control valves. The steam is provided by a boiler or steam generator. In an abnormal case, the stop valve shuts of the steal flow to the turbine. The steam flow to the turbine is regulated by controlling the control valves. The control valves are provided to regulate the flow of steam to the turbine for starting, increasing or decreasing the power, and also maintaining speed control with the turbine governor system. Unfortunately, the control valve has inherent static friction (stiction) nonlinearity characteristics. Industrial surveys indicated that about 20-30% of all control loops oscillate due to valve problem caused by this nonlinear characteristic. In this paper, steam turbine control valve stiction effect on power system oscillation is presented. To analyze the stiction characteristic effect, firstly a model of control valve and its stiction characteristic are derived by using Newton's laws. A complete tandem steam prime mover, including a speed governing system, a four-stage steam turbine, and a shaft with up to for masses is adopted to analyze the performance of the steam turbine. The governor system consists of some important parts, i.e. a proportional controller, speed relay, control valve with its stiction characteristic, and stem lift position of control valve controller. The steam turbine has

Modeling and control of Type-2 wind turbines for sub-synchronous resonance damping

International Nuclear Information System (INIS)

Mancilla-David, Fernando; Domínguez-García, José Luis; De Prada, Mikel; Gomis-Bellmunt, Oriol; Singh, Mohit; Muljadi, Eduard

2015-01-01

Highlights: • Dynamic modeling of Type-2 wind turbines for sub-synchronous resonance studies. • Systematic design of a power system stabilizer for Type-2 wind turbines. • Assessment of Type-2 wind turbines to suppress sub-synchronous resonance events. - Abstract: The rapid increase of wind power penetration into power systems around the world has led transmission system operators to enforce stringent grid codes requiring novel functionalities from renewable energy-based power generation. For this reason, there exists a need to asses whether wind turbines (WTs) will comply with such functionalities to ensure power system stability. This paper demonstrates that Type-2 WTs may induce sub-synchronous resonance (SSR) events when connected to a series-compensated transmission line, and with proper control, they may also suppress such events. The paper presents a complete dynamic model tailored to study, via eigenanalysis, SSR events in the presence of Type-2 WTs, and a systematic procedure to design a power system stabilizer using only local and measurable signals. Results are validated through a case study based on the IEEE first benchmark model for SSR studies, as well as with transient computer simulations

Actual and Virtual Reality: Making the Most of Field Trips.

Science.gov (United States)

Bellan, Jennifer Marie; Scheurman, Geoffrey

1998-01-01

Argues that a virtual field trip can complement and enhance a real one. Discusses the benefits and pitfalls of both types of field trips. Outlines a series of student and teacher activities combining an actual field trip and a virtual one to Fort Snelling in St. Paul, Minnesota. (MJP)

Vanpool trip planning based on evolutionary multiple objective optimization

Science.gov (United States)

Zhao, Ming; Yang, Disheng; Feng, Shibing; Liu, Hengchang

2017-08-01

Carpool and vanpool draw a lot of researchers’ attention, which is the emphasis of this paper. A concrete vanpool operation definition is given, based on the given definition, this paper tackles vanpool operation optimization using user experience decline index(UEDI). This paper is focused on making each user having identical UEDI and the system having minimum sum of all users’ UEDI. Three contributions are made, the first contribution is a vanpool operation scheme diagram, each component of the scheme is explained in detail. The second contribution is getting all customer’s UEDI as a set, standard deviation and sum of all users’ UEDI set are used as objectives in multiple objective optimization to decide trip start address, trip start time and trip destination address. The third contribution is a trip planning algorithm, which tries to minimize the sum of all users’ UEDI. Geographical distribution of the charging stations and utilization rate of the charging stations are considered in the trip planning process.

HOW DO YOUNG PEOPLE SELECT INFORMATION TO PLAN A TRIP

Directory of Open Access Journals (Sweden)

Oana ŢUGULEA

2013-12-01

Full Text Available The purpose of the research is to reveal the young tourists preferences in the process of planning a trip. Sources of information used, the utility of Internet/travel agencies in planning travel trip activities, preferred means of transportation and types of accommodation are investigated. As research methods, there used both qualitative and quantitative methods: focus group and survey. Internet is more used by young tourists in planning trips than travel agencies are. Internet is considered more useful in the documentation stage and when buying airline tickets. Young tourists are more influenced by friends when planning a trip. Young tourists prefer cars and planes as means of transportation for a trip and hotels and guesthouses as accommodation when traveling.

Hybrid intelligent monironing systems for thermal power plant trips

Science.gov (United States)

Barsoum, Nader; Ismail, Firas Basim

2012-11-01

Steam boiler is one of the main equipment in thermal power plants. If the steam boiler trips it may lead to entire shutdown of the plant, which is economically burdensome. Early boiler trips monitoring is crucial to maintain normal and safe operational conditions. In the present work two artificial intelligent monitoring systems specialized in boiler trips have been proposed and coded within the MATLAB environment. The training and validation of the two systems has been performed using real operational data captured from the plant control system of selected power plant. An integrated plant data preparation framework for seven boiler trips with related operational variables has been proposed for IMSs data analysis. The first IMS represents the use of pure Artificial Neural Network system for boiler trip detection. All seven boiler trips under consideration have been detected by IMSs before or at the same time of the plant control system. The second IMS represents the use of Genetic Algorithms and Artificial Neural Networks as a hybrid intelligent system. A slightly lower root mean square error was observed in the second system which reveals that the hybrid intelligent system performed better than the pure neural network system. Also, the optimal selection of the most influencing variables performed successfully by the hybrid intelligent system.

Self-benchmarking Guide for Laboratory Buildings: Metrics, Benchmarks, Actions

Energy Technology Data Exchange (ETDEWEB)

Mathew, Paul; Greenberg, Steve; Sartor, Dale

2009-07-13

This guide describes energy efficiency metrics and benchmarks that can be used to track the performance of and identify potential opportunities to reduce energy use in laboratory buildings. This guide is primarily intended for personnel who have responsibility for managing energy use in existing laboratory facilities - including facilities managers, energy managers, and their engineering consultants. Additionally, laboratory planners and designers may also use the metrics and benchmarks described in this guide for goal-setting in new construction or major renovation. This guide provides the following information: (1) A step-by-step outline of the benchmarking process. (2) A set of performance metrics for the whole building as well as individual systems. For each metric, the guide provides a definition, performance benchmarks, and potential actions that can be inferred from evaluating this metric. (3) A list and descriptions of the data required for computing the metrics. This guide is complemented by spreadsheet templates for data collection and for computing the benchmarking metrics. This guide builds on prior research supported by the national Laboratories for the 21st Century (Labs21) program, supported by the U.S. Department of Energy and the U.S. Environmental Protection Agency. Much of the benchmarking data are drawn from the Labs21 benchmarking database and technical guides. Additional benchmark data were obtained from engineering experts including laboratory designers and energy managers.

Questionnaire-based person trip visualization and its integration to quantitative measurements in Myanmar

Science.gov (United States)

Kimijiama, S.; Nagai, M.

2016-06-01

With telecommunication development in Myanmar, person trip survey is supposed to shift from conversational questionnaire to GPS survey. Integration of both historical questionnaire data to GPS survey and visualizing them are very important to evaluate chronological trip changes with socio-economic and environmental events. The objectives of this paper are to: (a) visualize questionnaire-based person trip data, (b) compare the errors between questionnaire and GPS data sets with respect to sex and age and (c) assess the trip behaviour in time-series. Totally, 345 individual respondents were selected through random stratification to assess person trip using a questionnaire and GPS survey for each. Conversion of trip information such as a destination from the questionnaires was conducted by using GIS. The results show that errors between the two data sets in the number of trips, total trip distance and total trip duration are 25.5%, 33.2% and 37.2%, respectively. The smaller errors are found among working-age females mainly employed with the project-related activities generated by foreign investment. The trip distant was yearly increased. The study concluded that visualization of questionnaire-based person trip data and integrating them to current quantitative measurements are very useful to explore historical trip changes and understand impacts from socio-economic events.

Echoes from the Field: An Ethnographic Investigation of Outdoor Science Field Trips

Science.gov (United States)

Boxerman, Jonathan Zvi

As popular as field trips are, one might think they have been well-studied. Nonetheless, field trips have not been heavily studied, and little research has mapped what actually transpires during field trips. Accordingly, to address this research gap, I asked two related research questions. The first question is a descriptive one: What happens on field trips? The second question is explanatory: What field trip events are memorable and why? I employed design research and ethnographic methodologies to study learning in naturally occurring contexts. I collaborated with middle-school science teachers to design and implement more than a dozen field trips. The field trips were nested in particular biology and earth sciences focal units. Students were tasked with making scientific observations in the field and then analyzing this data during classroom activities. Audio and video recording devices captured what happened during the field trips, classroom activities and discussions, and the interviews. I conducted comparative microanalysis of videotaped interactions. I observed dozens of events during the field trips that reverberated across time and place. I characterize the features of these events and the objects that drew interest. Then, I trace the residue across contexts. This study suggests that field trips could be more than one-off experiences and have the potential to be resources to seed and enrich learning and to augment interest in the practice of science.

Appraisal of boundary layer trips for landing gear testing

Science.gov (United States)

McCarthy, Philip; Feltham, Graham; Ekmekci, Alis

2013-11-01

Dynamic similarity during scaled model testing is difficult to maintain. Forced boundary layer transition via a surface protuberance is a common method used to address this issue, however few guidelines exist for the effective tripping of complex geometries, such as aircraft landing gears. To address this shortcoming, preliminary wind tunnel tests were performed at Re = 500,000. Surface transition visualisation and pressure measurements show that zigzag type trips of a given size and location are effective at promoting transition, thus preventing the formation of laminar separation bubbles and increasing the effective Reynolds number from the critical regime to the supercritical regime. Extension of these experiments to include three additional tripping methods (wires, roughness strips, CADCUT dots) in a range of sizes, at Reynolds number of 200,000 and below, have been performed in a recirculating water channel. Analysis of surface pressure measurements and time resolved PIV for each trip device, size and location has established a set of recommendations for successful use of tripping for future, low Reynolds number landing gear testing.

Gas turbine

International Nuclear Information System (INIS)

Yang, Ok Ryong

2004-01-01

This book introduces gas turbine cycle explaining general thing of gas turbine, full gas turbine cycle, Ericson cycle and Brayton cycle, practical gas turbine cycle without pressure loss, multiaxial type gas turbine cycle and special gas turbine cycle, application of basic theory on a study on suction-cooling gas turbine cycle with turbo-refrigerating machine using the bleed air, and general performance characteristics of the suction-cooling gas turbine cycle combined with absorption-type refrigerating machine.

Aging of turbine drives for safety-related pumps in nuclear power plants

International Nuclear Information System (INIS)

Cox, D.F.

1995-06-01

This study was performed to examine the relationship between time-dependent degradation and current industry practices in the areas of maintenance, surveillance, and operation of steam turbine drives for safety-related pumps. These pumps are located in the Auxiliary Feedwater (AFW) system for pressurized-water reactor plants and in the Reactor Core Isolation Cooling and High-Pressure Coolant Injection systems for boiling-water reactor plants. This research has been conducted by examination of failure data in the Nuclear Plant Reliability Data System, review of Licensee Event Reports, discussion of problems with operating plant personnel, and personal observation. The reported failure data were reviewed to determine the cause of the event and the method of discovery. Based on the research results, attempts have been made to determine the predictability of failures and possible preventive measures that may be implemented. Findings in a recent study of AFW systems indicate that the turbine drive is the single largest contributor to AFW system degradation. However, examination of the data shows that the turbine itself is a reliable piece of equipment with a good service record. Most of the problems documented are the result of problems with the turbine controls and the mechanical overspeed trip mechanism; these apparently stem from three major causes which are discussed in the text. Recent improvements in maintenance practices and procedures, combined with a stabilization of the design, have led to improved performance resulting in a reliable safety-related component. However, these improvements have not been universally implemented

Accommodation of the spinal cat to a tripping perturbation

Directory of Open Access Journals (Sweden)

Hui eZhong

2012-05-01

Full Text Available Adult cats with a complete spinal cord transection at T12-T13 can relearn over a period of days-to-weeks how to generate full weight-bearing stepping on a treadmill or standing ability if trained specifically for that task. In the present study, we assessed short-term (msec-min adaptations by repetitively imposing a mechanical perturbation on the hindlimb of chronic spinal cats by placing a rod in the path of the leg during the swing phase to trigger a tripping response. The kinematics and EMG were recorded during control (10 steps, trip (1 to 60 steps with various patterns and then release (without any tripping stimulus, 10 to 20 steps sequences. Our data show that the activation patterns and kinematics of the hindlimb in the step cycle immediately following the initial trip (mechanosensory stimulation of the dorsal surface of the paw was modified in a way that increased the probability of avoiding the obstacle in the subsequent step. This indicates that the spinal sensorimotor circuitry reprogrammed the trajectory of the swing following a perturbation prior to the initiation of the swing phase of the subsequent step, in effect attempting to avoid the re-occurrence of the perturbation. The average height of the release steps was elevated compared to control regardless of the pattern and the length of the trip sequences. In addition, the average impact force on the tripping rod tended to be lower with repeated exposure to the tripping stimulus. EMG recordings suggest that the semitendinosus, a primary knee flexor, was a major contributor to the adaptive tripping response. These results demonstrate that the lumbosacral locomotor circuitry can modulate the activation patterns of the hindlimb motor pools within the time frame of single step in a manner that tends to minimize repeated perturbations. Furthermore, these adaptations remained evident for a number of steps after removal of the mechanosensory stimulation.

MCMII and the TriP chip

Energy Technology Data Exchange (ETDEWEB)

Juan Estrada et al.

2003-12-19

We describe the development of the electronics that will be used to read out the Fiber Tracker and Preshower detectors in Run IIb. This electronics is needed for operation at 132ns bunch crossing, and may provide a measurement of the z coordinate of the Fiber Tracker hits when operating at 396ns bunch crossing. Specifically, we describe the design and preliminary tests of the Trip chip, MCM IIa, MCM IIb and MCM IIc. This document also serves as a user manual for the Trip chip and the MCM.

WIPP site and vicinity geological field trip

International Nuclear Information System (INIS)

Chaturvedi, L.

1980-10-01

The Environmental Evaluation Group (EEG) is conducting an assessment of the radiological health risks to people from the Waste Isolation Pilot Plant (WIPP). As a part of this work, EEG is making an effort to improve the understanding of those geological issues concerning the WIPP site which may affect the radiological consequences of the proposed repository. One of the important geological issues to be resolved is the timing and the nature of the dissolution processes which may have affected the WIPP site. EEG organized a two-day conference of geological scientists, titled Geotechnical Considerations for Radiological Hazard Assessment of WIPP on January 17-18, 1980. During this conference, it was realized that a field trip to the site would further clarify the different views on the geological processes active at the site. The field trip of June 16-18, 1980 was organized for this purpose. This report provides a summary of the field trip activities along with the participants post field trip comments. Important field stops are briefly described, followed by a more detailed discussion of critical geological issues. The report concludes with EEG's summary and recommendations to the US Department of Energy for further information needed to more adequately resolve concerns for the geologic and hydrologic integrity of the site

The moderating role of shopping trip type in store satisfaction formation

NARCIS (Netherlands)

Hunneman, Auke; Verhoef, Pieter; Sloot, Laurentius

Consumers may weigh store attributes differently depending on the type of shopping trip. For example, fill-in shoppers likely value convenience, due to the ad-hoc nature and urgency of such trips. However, no study has yet explored the effects of shopping trip types on satisfaction formation. This

SAME-DAY TRIPS: A CHANCE OF URBAN DESTINATION DEVELOPMENT

Directory of Open Access Journals (Sweden)

Dario Simicevic

2011-12-01

Full Text Available The global economic crisis, the decline of standard and climatic factors influence the allocation of tourism trends at the global level. Certain types of tourist movements start up and develop; they have been present, but not sufficiently studied by authors. They also include a short trip or visit to a particular destination. Considering their characteristics, they do not require a lot of money and they make an increasingly important segment of the tourism market. Therefore, the importance of same-day trips should not be neglected on today's tourism market. Although in practice this part of the tourist offers and demand has not often been attached enough importance, same day trip can achieve a very significant inflow of funds and encourage the development of many potential tourist destinations. For all the reasons mentioned above, and because of its importance, the organization of same day-trips should be the fundamental basis and essential focus for tourism development. Taking into consideration that inbound tourist agencies show special interest for same-day trips, we have tried to give a starting point for further research in this part of the tourism market.

Installation of a second trip system

International Nuclear Information System (INIS)

Bessada, E.

1997-01-01

Since its first criticality in 1957, the NRU reactor has been operating safely and efficiently supporting the CANDU reactor's research and development programs and producing radioisotopes for medical use. To ensure that the reactor continues to operate safely and effectively, Atomic Energy of Canada Limited (AECL) commissioned a team in 1989 to conduct a systematic review and assessment of the reactor condition. The outcome of the study indicated that the overall condition of the reactor is good and that it is being operated safely. The study also produced recommendations as to where safety can be improved. These recommendations are the basis of the upgrade program currently being implemented in the reactor. The Second Trip System (STS) is part of the upgrade program. It is a stand alone seismically qualified trip system that operates independently from the existing first trip system (FST) to shutdown the reactor. This paper discusses the design, installation and the inactive commissioning of the system, and the process used to ensure that the system can be retrofitted to the reactor without affecting its safety or its operational requirements. (author)

Benchmark calculation for GT-MHR using HELIOS/MASTER code package and MCNP

International Nuclear Information System (INIS)

Lee, Kyung Hoon; Kim, Kang Seog; Noh, Jae Man; Song, Jae Seung; Zee, Sung Quun

2005-01-01

The latest research associated with the very high temperature gas-cooled reactor (VHTR) is focused on the verification of a system performance and safety under operating conditions for the VHTRs. As a part of those, an international gas-cooled reactor program initiated by IAEA is going on. The key objectives of this program are the validation of analytical computer codes and the evaluation of benchmark models for the projected and actual VHTRs. New reactor physics analysis procedure for the prismatic VHTR is under development by adopting the conventional two-step procedure. In this procedure, a few group constants are generated through the transport lattice calculations using the HELIOS code, and the core physics analysis is performed by the 3-dimensional nodal diffusion code MASTER. We evaluated the performance of the HELIOS/MASTER code package through the benchmark calculations related to the GT-MHR (Gas Turbine-Modular Helium Reactor) to dispose weapon plutonium. In parallel, MCNP is employed as a reference code to verify the results of the HELIOS/MASTER procedure

Managing the effect of TRIPS on availability of priority vaccines.

Science.gov (United States)

Milstien, Julie; Kaddar, Miloud

2006-05-01

The stated purpose of intellectual property protection is to stimulate innovation. The Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) requires all Members of the World Trade Organization (WTO) to enact national laws conferring minimum standards of intellectual property protection by certain deadlines. Critics of the Agreement fear that such action is inconsistent with ensuring access to medicines in the developing world. A WHO convened meeting on intellectual property rights and vaccines in developing countries, on which this paper is based, found no evidence that TRIPS has stimulated innovation in developing market vaccine development (where markets are weak) or that protection of intellectual property rights has had a negative effect on access to vaccines. However, access to future vaccines in the developing world could be threatened by compliance with TRIPS. The management of such threats requires adherence of all countries to the Doha Declaration on TRIPS, and the protections guaranteed by the Agreement itself, vigilance on TRIPS-plus elements of free trade agreements, developing frameworks for licensing and technology transfer, and promoting innovative vaccine development in developing countries. The role of international organizations in defining best practices, dissemination of information, and monitoring TRIPS impact will be crucial to ensuring optimal access to priority new vaccines for the developing world.

Unveiling E-Bike Potential for Commuting Trips from GPS Traces

Directory of Open Access Journals (Sweden)

Angel J. Lopez

2017-06-01

Full Text Available Common goals of sustainable mobility approaches are to reduce the need for travel, to facilitate modal shifts, to decrease trip distances and to improve energy efficiency in the transportation systems. Among these issues, modal shift plays an important role for the adoption of vehicles with fewer or zero emissions. Nowadays, the electric bike (e-bike is becoming a valid alternative to cars in urban areas. However, to promote modal shift, a better understanding of the mobility behaviour of e-bike users is required. In this paper, we investigate the mobility habits of e-bikers using GPS data collected in Belgium from 2014 to 2015. By analysing more than 10,000 trips, we provide insights about e-bike trip features such as: distance, duration and speed. In addition, we offer a deep look into which routes are preferred by bike owners in terms of their physical characteristics and how weather influences e-bike usage. Results show that trips with higher travel distances are performed during working days and are correlated with higher average speeds. Usage patterns extracted from our data set also indicate that e-bikes are preferred for commuting (home-work and business (work related trips rather than for recreational trips.

Some notes on the big trip

International Nuclear Information System (INIS)

Gonzalez-Diaz, Pedro F.

2006-01-01

The big trip is a cosmological process thought to occur in the future by which the entire universe would be engulfed inside a gigantic wormhole and might travel through it along space and time. In this Letter we discuss different arguments that have been raised against the viability of that process, reaching the conclusions that the process can actually occur by accretion of phantom energy onto the wormholes and that it is stable and might occur in the global context of a multiverse model. We finally argue that the big trip does not contradict any holographic bounds on entropy and information

Some notes on the big trip

Energy Technology Data Exchange (ETDEWEB)

Gonzalez-Diaz, Pedro F. [Colina de los Chopos, Centro de Fisica ' Miguel A. Catalan' , Instituto de Matematicas y Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 121, 28006 Madrid (Spain)]. E-mail: pedrogonzalez@mi.madritel.es

2006-03-30

The big trip is a cosmological process thought to occur in the future by which the entire universe would be engulfed inside a gigantic wormhole and might travel through it along space and time. In this Letter we discuss different arguments that have been raised against the viability of that process, reaching the conclusions that the process can actually occur by accretion of phantom energy onto the wormholes and that it is stable and might occur in the global context of a multiverse model. We finally argue that the big trip does not contradict any holographic bounds on entropy and information.

Benchmarking in University Toolbox

Directory of Open Access Journals (Sweden)

Katarzyna Kuźmicz

2015-06-01

Full Text Available In the face of global competition and rising challenges that higher education institutions (HEIs meet, it is imperative to increase innovativeness and efficiency of their management. Benchmarking can be the appropriate tool to search for a point of reference necessary to assess institution’s competitive position and learn from the best in order to improve. The primary purpose of the paper is to present in-depth analysis of benchmarking application in HEIs worldwide. The study involves indicating premises of using benchmarking in HEIs. It also contains detailed examination of types, approaches and scope of benchmarking initiatives. The thorough insight of benchmarking applications enabled developing classification of benchmarking undertakings in HEIs. The paper includes review of the most recent benchmarking projects and relating them to the classification according to the elaborated criteria (geographical range, scope, type of data, subject, support and continuity. The presented examples were chosen in order to exemplify different approaches to benchmarking in higher education setting. The study was performed on the basis of the published reports from benchmarking projects, scientific literature and the experience of the author from the active participation in benchmarking projects. The paper concludes with recommendations for university managers undertaking benchmarking, derived on the basis of the conducted analysis.

Trip attraction rates of shopping centers in Northern New Castle County, Delaware.

Science.gov (United States)

2004-07-01

This report presents the trip attraction rates of the shopping centers in Northern New : Castle County in Delaware. The study aims to provide an alternative to ITE Trip : Generation Manual (1997) for computing the trip attraction of shopping centers ...

Library Benchmarking

Directory of Open Access Journals (Sweden)

Wiji Suwarno

2017-02-01

Full Text Available The term benchmarking has been encountered in the implementation of total quality (TQM or in Indonesian termed holistic quality management because benchmarking is a tool to look for ideas or learn from the library. Benchmarking is a processof measuring and comparing for continuous business process of systematic and continuous measurement, the process of measuring and comparing for continuous business process of an organization to get information that can help these organization improve their performance efforts.

TurbinAID

International Nuclear Information System (INIS)

Moradian, M.A.; Chow, M.P.; Osborne, R.L.; Jenkins, M.A.

1991-01-01

The Westinghouse Turbine Artificial Intelligence Diagnostics system or TurbinAID, can diagnose both thermodynamic and mechanical component anomalies within the turbine, and around the turbine cycle. any monitoring system can detect that a variable is in an abnormal state, but TurbinAID can also indicate the cause, and provide recommended corrective action(s). The TurbinAID Expert Systems utilize multiple sensor and variable inputs, and their interdependencies in the generation of a diagnosis. The system performs sensor validation as part of the data acquisition scheme. The TurbinAID system has been in operation for several years. This paper describes the monitoring and diagnostic functions provided by TurbinAID, and how the utility industry both nuclear and fossil, can utilize the system to enhance unit operation

Hybrid Intelligent Warning System for Boiler tube Leak Trips

Directory of Open Access Journals (Sweden)

Singh Deshvin

2017-01-01

Full Text Available Repeated boiler tube leak trips in coal fired power plants can increase operating cost significantly. An early detection and diagnosis of boiler trips is essential for continuous safe operations in the plant. In this study two artificial intelligent monitoring systems specialized in boiler tube leak trips have been proposed. The first intelligent warning system (IWS-1 represents the use of pure artificial neural network system whereas the second intelligent warning system (IWS-2 represents merging of genetic algorithms and artificial neural networks as a hybrid intelligent system. The Extreme Learning Machine (ELM methodology was also adopted in IWS-1 and compared with traditional training algorithms. Genetic algorithm (GA was adopted in IWS-2 to optimize the ANN topology and the boiler parameters. An integrated data preparation framework was established for 3 real cases of boiler tube leak trip based on a thermal power plant in Malaysia. Both the IWSs were developed using MATLAB coding for training and validation. The hybrid IWS-2 performed better than IWS-1.The developed system was validated to be able to predict trips before the plant monitoring system. The proposed artificial intelligent system could be adopted as a reliable monitoring system of the thermal power plant boilers.

FENDL neutronics benchmark: Specifications for the calculational neutronics and shielding benchmark

International Nuclear Information System (INIS)

Sawan, M.E.

1994-12-01

During the IAEA Advisory Group Meeting on ''Improved Evaluations and Integral Data Testing for FENDL'' held in Garching near Munich, Germany in the period 12-16 September 1994, the Working Group II on ''Experimental and Calculational Benchmarks on Fusion Neutronics for ITER'' recommended that a calculational benchmark representative of the ITER design should be developed. This report describes the neutronics and shielding calculational benchmark available for scientists interested in performing analysis for this benchmark. (author)

Pre-Trip Notification Database (PTNS)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The PTNS contains pre-trip notification data from vessels participating in the Northeast Multispecies groundfish fishery from 2010 to present and the Longfin squid...

A Novel Trip Coverage Index for Transit Accessibility Assessment Using Mobile Phone Data

Directory of Open Access Journals (Sweden)

Zhengyi Cai

2017-01-01

Full Text Available Transit accessibility is an important measure on the service performance of transit systems. To assess whether the public transit service is well accessible for trips of specific origins, destinations, and origin-destination (OD pairs, a novel measure, the Trip Coverage Index (TCI, is proposed in this paper. TCI considers both the transit trip coverage and spatial distribution of individual travel demands. Massive trips between cellular base stations are estimated by using over four-million mobile phone users. An easy-to-implement method is also developed to extract the transit information and driving routes for millions of requests. Then the trip coverage of each OD pair is calculated. For demonstrative purposes, TCI is applied to the transit network of Hangzhou, China. The results show that TCI represents the better transit trip coverage and provides a more powerful assessment tool of transit quality of service. Since the calculation is based on trips of all modes, but not only the transit trips, TCI offers an overall accessibility for the transit system performance. It enables decision makers to assess transit accessibility in a finer-grained manner on the individual trip level and can be well transformed to measure transit services of other cities.

Benchmarking and Performance Measurement.

Science.gov (United States)

Town, J. Stephen

This paper defines benchmarking and its relationship to quality management, describes a project which applied the technique in a library context, and explores the relationship between performance measurement and benchmarking. Numerous benchmarking methods contain similar elements: deciding what to benchmark; identifying partners; gathering…

CNMI Commercial Purchases (Trip Ticket)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Commonwealth of Northern Mariana Islands (CNMI), Division of Fish and Wildlife (DFW) collects 'Trip Ticket' or purchase invoice data from vendors that buy fish...

Transcription regulator TRIP-Br2 mediates ER stress-induced brown adipocytes dysfunction.

Science.gov (United States)

Qiang, Guifen; Whang Kong, Hyerim; Gil, Victoria; Liew, Chong Wee

2017-01-09

In contrast to white adipose tissue, brown adipose tissue (BAT) is known to play critical roles for both basal and inducible energy expenditure. Obesity is associated with reduction of BAT function; however, it is not well understood how obesity promotes BAT dysfunction, especially at the molecular level. Here we show that the transcription regulator TRIP-Br2 mediates ER stress-induced inhibition of lipolysis and thermogenesis in BAT. Using in vitro, ex vivo, and in vivo approaches, we demonstrate that obesity-induced inflammation upregulates brown adipocytes TRIP-Br2 expression via the ER stress pathway and amelioration of ER stress in mice completely abolishes high fat diet-induced upregulation of TRIP-Br2 in BAT. We find that increased TRIP-Br2 significantly inhibits brown adipocytes thermogenesis. Finally, we show that ablation of TRIP-Br2 ameliorates ER stress-induced inhibition on lipolysis, fatty acid oxidation, oxidative metabolism, and thermogenesis in brown adipocytes. Taken together, our current study demonstrates a role for TRIP-Br2 in ER stress-induced BAT dysfunction, and inhibiting TRIP-Br2 could be a potential approach for counteracting obesity-induced BAT dysfunction.

Trip Generations at “Polyclinic” Land Use Type in Johor Bahru, Malaysia

OpenAIRE

Ahmed, Ishtiaque; Abdulrahman, Suleiman; Hainin, Mohd Rosli; Hassan, Sitti Asmah

2014-01-01

Transportation planners need to estimate the trip generations of different land use types in the travel demand forecasting process. The Trip Generation Manual of Malaysia, similar to the Trip Generation Manual of the Institute of Transportation Engineers, USA, provides the trip generation rate at “Polyclinics” as a function of the Gross Floor Area. However, the data for this rate have no line of best fit resulting in the lack of confidence in the prediction. This study considered ten location...

Benchmarking in the Netherlands

International Nuclear Information System (INIS)

1999-01-01

In two articles an overview is given of the activities in the Dutch industry and energy sector with respect to benchmarking. In benchmarking operational processes of different competitive businesses are compared to improve your own performance. Benchmark covenants for energy efficiency between the Dutch government and industrial sectors contribute to a growth of the number of benchmark surveys in the energy intensive industry in the Netherlands. However, some doubt the effectiveness of the benchmark studies

Micro-turbines

International Nuclear Information System (INIS)

Tashevski, Done

2003-01-01

In this paper a principle of micro-turbines operation, type of micro-turbines and their characteristics is presented. It is shown their usage in cogeneration and three generation application with the characteristics, the influence of more factors on micro-turbines operation as well as the possibility for application in Macedonia. The paper is result of the author's participation in the training program 'Micro-turbine technology' in Florida, USA. The characteristics of different types micro-turbines by several world producers are shown, with accent on US micro-turbines producers (Capstone, Elliott). By using the gathered Author's knowledge, contacts and the previous knowledge, conclusions and recommendations for implementation of micro-turbines in Macedonia are given. (Author)

Teachers as Secondary Players: Involvement in Field Trips to Natural Environments

Science.gov (United States)

Alon, Nirit Lavie; Tal, Tali

2017-08-01

This study focused on field trips to natural environments where the teacher plays a secondary role alongside a professional guide. We investigated teachers' and field trip guides' views of the teacher's role, the teacher's actual function on the field trip, and the relationship between them. We observed field trips, interviewed teachers and guides, and administered questionnaires. We found different levels of teacher involvement, ranging from mainly supervising and giving technical help, to high involvement especially in the cognitive domain and sometimes in the social domain. Analysis of students' self-reported outcomes showed that the more students believe their teachers are involved, the higher the self-reported learning outcomes.

Make My Trip Count 2015

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Make My Trip Count (MMTC) commuter survey, conducted in September and October 2015 by GBA, the Pittsburgh 2030 District, and 10 other regional transportation...

Trip setpoint analysis for the reactor protection system of an advanced integral reactor

International Nuclear Information System (INIS)

Yang, Soo Hyung; Kim, Soo Hyung; Chung, Young Jong; Zee, Sung Quun

2007-01-01

The trip setpoints for the reactor protection system of a 65-MWt advanced integral reactor have been analyzed through sensitivity evaluations by using the Transients and Setpoint Simulation/System-integrated Modular Reactor code. In the analysis, an inadvertent control rod withdrawal event has been considered as an initiating event because this event results in the worst consequences from the viewpoint of the minimum critical heat flux ratio and its consequences are considerably affected by the trip setpoints. Sensitivity evaluations have been performed by changing the trip setpoints for the ceiling of a variable overpower trip (VOPT) function and the pressure of a high pressurizer pressure trip function. Analysis results show that a VOPT function is an effective means to satisfy the acceptance criteria as the control rod rapidly withdraws: on the other hand, a high pressurizer pressure trip function is an essential measure to preserve the safety margin in the case of a slow withdrawal of the control rod because a reactor trip by a VOPT function does not occur in this case. It is also shown that the adoptions of 122.2% of the rated core power and 16.25 MPa as the trip setpoint for the ceiling of a VOPT function and the pressure of a high pressurizer pressure trip function are good selections to satisfy the acceptance criteria

Flat Plate Boundary Layer Stimulation Using Trip Wires and Hama Strips

Science.gov (United States)

Peguero, Charles; Henoch, Charles; Hrubes, James; Fredette, Albert; Roberts, Raymond; Huyer, Stephen

2017-11-01

Water tunnel experiments on a flat plate at zero angle of attack were performed to investigate the effect of single roughness elements, i.e., trip wires and Hama strips, on the transition to turbulence. Boundary layer trips are traditionally used in scale model testing to force a boundary layer to transition from laminar to turbulent flow at a single location to aid in scaling of flow characteristics. Several investigations of trip wire effects exist in the literature, but there is a dearth of information regarding the influence of Hama strips on the flat plate boundary layer. The intent of this investigation is to better understand the effects of boundary layer trips, particularly Hama strips, and to investigate the pressure-induced drag of both styles of boundary layer trips. Untripped and tripped boundary layers along a flat plate at a range of flow speeds were characterized with multiple diagnostic measurements in the NUWC/Newport 12-inch water tunnel. A wide range of Hama strip and wire trip thicknesses were used. Measurements included dye flow visualization, direct skin friction and parasitic drag force, boundary layer profiles using LDV, wall shear stress fluctuations using hot film anemometry, and streamwise pressure gradients. Test results will be compared to the CFD and boundary layer model results as well as the existing body of work. Conclusions, resulting in guidance for application of Hama strips in model scale experiments and non-dimensional predictions of pressure drag will be presented.

WLUP benchmarks

International Nuclear Information System (INIS)

Leszczynski, Francisco

2002-01-01

The IAEA-WIMS Library Update Project (WLUP) is on the end stage. The final library will be released on 2002. It is a result of research and development made by more than ten investigators during 10 years. The organization of benchmarks for testing and choosing the best set of data has been coordinated by the author of this paper. It is presented the organization, name conventions, contents and documentation of WLUP benchmarks, and an updated list of the main parameters for all cases. First, the benchmarks objectives and types are given. Then, comparisons of results from different WIMSD libraries are included. Finally it is described the program QVALUE for analysis and plot of results. Some examples are given. The set of benchmarks implemented on this work is a fundamental tool for testing new multigroup libraries. (author)

Benchmarking electricity distribution

Energy Technology Data Exchange (ETDEWEB)

Watts, K. [Department of Justice and Attorney-General, QLD (Australia)

1995-12-31

Benchmarking has been described as a method of continuous improvement that involves an ongoing and systematic evaluation and incorporation of external products, services and processes recognised as representing best practice. It is a management tool similar to total quality management (TQM) and business process re-engineering (BPR), and is best used as part of a total package. This paper discusses benchmarking models and approaches and suggests a few key performance indicators that could be applied to benchmarking electricity distribution utilities. Some recent benchmarking studies are used as examples and briefly discussed. It is concluded that benchmarking is a strong tool to be added to the range of techniques that can be used by electricity distribution utilities and other organizations in search of continuous improvement, and that there is now a high level of interest in Australia. Benchmarking represents an opportunity for organizations to approach learning from others in a disciplined and highly productive way, which will complement the other micro-economic reforms being implemented in Australia. (author). 26 refs.

Seismic damage sensing of bridge structures with TRIP reinforcement steel bars

Science.gov (United States)

Adachi, Yukio; Unjoh, Shigeki

2001-07-01

Intelligent reinforced concrete structures with transformation-induced-plasticity (TRIP) steel rebars that have self-diagnosis function are proposed. TRIP steel is special steel with Fe-Cr based formulation. It undergoes a permanent change in crystal structure in proportion to peak strain. This changes from non-magnetic to magnetic steel. By using the TRIP steel rebars, the seismic damage level of reinforced concrete structures can be easily recognized by measuring the residual magnetic level of the TRIP rebars, that is directly related to the peak strain during a seismic event. This information will be most helpful for repairing the damaged structures. In this paper, the feasibility of the proposed intelligent reinforced concrete structure for seismic damage sensing is experimentally studied. The relation among the damage level, peak strain of rebars, and residual magnetic level of rebars of reinforced concrete beams implemented with TRIP steel bars was experimentally studied. As the result of this study, this intelligent structure can diagnose accumulated strain/damage anticipated during seismic event.

Recommendations for Planning and Managing International Short-term Pharmacy Service Trips.

Science.gov (United States)

Johnson, Kalin L; Alsharif, Naser Z; Rovers, John; Connor, Sharon; White, Nicole D; Hogue, Michael D

2017-03-25

International pharmacy service trips by schools and colleges of pharmacy allow students to provide health care to medically underserved areas. A literature review (2000-2016) in databases and Internet searches with specific keywords or terms was performed to assess current practices to establish and maintain successful pharmacy service trips. Educational documents such as syllabi were obtained from pharmacy programs and examined. A preliminary draft was developed and authors worked on sections of interest and expertise. Considerations and current recommendations are provided for the key aspects of the home institution and the host country requirements for pharmacy service trips based on findings from a literature search and the authors' collective, extensive experience. Evaluation of the trip and ethical considerations are also discussed. This article serves as a resource for schools and colleges of pharmacy that are interested in the development of new pharmacy service trips and provides key considerations for continuous quality improvement of current or future activities.

Trip-oriented travel time prediction (TOTTP) with historical vehicle trajectories

Science.gov (United States)

Xu, Tao; Li, Xiang; Claramunt, Christophe

2018-06-01

Accurate travel time prediction is undoubtedly of importance to both traffic managers and travelers. In highly-urbanized areas, trip-oriented travel time prediction (TOTTP) is valuable to travelers rather than traffic managers as the former usually expect to know the travel time of a trip which may cross over multiple road sections. There are two obstacles to the development of TOTTP, including traffic complexity and traffic data coverage.With large scale historical vehicle trajectory data and meteorology data, this research develops a BPNN-based approach through integrating multiple factors affecting trip travel time into a BPNN model to predict trip-oriented travel time for OD pairs in urban network. Results of experiments demonstrate that it helps discover the dominate trends of travel time changes daily and weekly, and the impact of weather conditions is non-trivial.

The development of cause analysis system for CPCS trip using the rule-base deduction

International Nuclear Information System (INIS)

Park, Hee Seok; Kim, Dong Hoon; Seo, Ho Joon; Koo, In Soo; Park, Suk Joon

1992-01-01

The Core Protection Calculator System(CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by Combustion Engineering Company. The major function of the CPCS is to generate contact outputs for the Departure from Nucleate Boiling Ratio(DNBR) Trip and Local Power Density(LPD) Trip. But in CPCS the trip causes can not be identified, only trip status is displayed. It may take much time and efforts for plant operator to analyse the trip causes of CPCS. So, the Cause Analysis System for CPCS(CASCPCS) has been developed using the rule-base deduction method to aid the operators in Nuclear Power Plant

Benchmarking semantic web technology

CERN Document Server

García-Castro, R

2009-01-01

This book addresses the problem of benchmarking Semantic Web Technologies; first, from a methodological point of view, proposing a general methodology to follow in benchmarking activities over Semantic Web Technologies and, second, from a practical point of view, presenting two international benchmarking activities that involved benchmarking the interoperability of Semantic Web technologies using RDF(S) as the interchange language in one activity and OWL in the other.The book presents in detail how the different resources needed for these interoperability benchmarking activities were defined:

RUNE benchmarks

DEFF Research Database (Denmark)

Peña, Alfredo

This report contains the description of a number of benchmarks with the purpose of evaluating flow models for near-shore wind resource estimation. The benchmarks are designed based on the comprehensive database of observations that the RUNE coastal experiment established from onshore lidar...

MCNP neutron benchmarks

International Nuclear Information System (INIS)

Hendricks, J.S.; Whalen, D.J.; Cardon, D.A.; Uhle, J.L.

1991-01-01

Over 50 neutron benchmark calculations have recently been completed as part of an ongoing program to validate the MCNP Monte Carlo radiation transport code. The new and significant aspects of this work are as follows: These calculations are the first attempt at a validation program for MCNP and the first official benchmarking of version 4 of the code. We believe the chosen set of benchmarks is a comprehensive set that may be useful for benchmarking other radiation transport codes and data libraries. These calculations provide insight into how well neutron transport calculations can be expected to model a wide variety of problems

The LEP RF Trip and Beam Loss Diagnostics System

CERN Document Server

Arnaudon, L; Beetham, G; Ciapala, Edmond; Juillard, J C; Olsen, R

2002-01-01

During the last years of operation the number of operationally independent RF stations distributed around LEP reached a total of 40. A serious difficulty when running at high energy and high beam intensities was to establish cause and effect in beam loss situations, where the trip of any single RF station would result in beam loss, rapidly producing further multiple RF station trips. For the last year of operation a fast post-mortem diagnostics system was developed to allow precise time-stamping of RF unit trips and beam intensity changes. The system was based on eight local DSP controlled fast acquisition and event recording units, one in each RF sector, connected to critical RF control signals and fast beam intensity monitors and synchronised by GPS. The acquisition units were armed and synchronised at the start of each fill. At the end of the fill the local time-stamped RF trip and beam intensity change history tables were recovered, events ordered and the results stored in a database for subsequent analys...

Turbine stage model

International Nuclear Information System (INIS)

Kazantsev, A.A.

2009-01-01

A model of turbine stage for calculations of NPP turbine department dynamics in real time was developed. The simulation results were compared with manufacturer calculations for NPP low-speed and fast turbines. The comparison results have shown that the model is valid for real time simulation of all modes of turbines operation. The model allows calculating turbine stage parameters with 1% accuracy. It was shown that the developed turbine stage model meets the accuracy requirements if the data of turbine blades setting angles for all turbine stages are available [ru

Addressing legal and political barriers to global pharmaceutical access: options for remedying the impact of the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) and the imposition of TRIPS-plus standards.

Science.gov (United States)

Cohen-Kohler, Jillian Clare; Forman, Lisa; Lipkus, Nathaniel

2008-07-01

Despite myriad programs aimed at increasing access to essential medicines in the developing world, the global drug gap persists. This paper focuses on the major legal and political constraints preventing implementation of coordinated global policy solutions - particularly, the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) and bilateral and regional free trade agreements. We argue that several policy and research routes should be taken to mitigate the restrictive impact of TRIPS and TRIPS-plus rules, including greater use of TRIPS flexibilities, advancement of human rights, and an ethical framework for essential medicines distribution, and a broader campaign that debates the legitimacy of TRIPS and TRIPS-plus standards themselves.

Validation of four LES and a vortex model against stereo-PIV measurements in the near wake of an actuator disc and a wind turbine

DEFF Research Database (Denmark)

Lignarolo, Lorenzo E.M.; Mehta, Dhruv; Stevens, Richard J.A.M.

2016-01-01

In this paper we report the results of a workshop organised by the Delft University of Technology in 2014, aiming at the comparison between different state-of-the-art numerical models for the simulation of wind turbine wakes. The chosen benchmark case is a wind tunnel measurement, where stereosco...

Trip time prediction in mass transit companies. A machine learning approach

OpenAIRE

João M. Moreira; Alípio Jorge; Jorge Freire de Sousa; Carlos Soares

2005-01-01

In this paper we discuss how trip time prediction can be useful foroperational optimization in mass transit companies and which machine learningtechniques can be used to improve results. Firstly, we analyze which departmentsneed trip time prediction and when. Secondly, we review related work and thirdlywe present the analysis of trip time over a particular path. We proceed by presentingexperimental results conducted on real data with the forecasting techniques wefound most adequate, and concl...

Verification of aero-elastic offshore wind turbine design codes under IEA Wind Task XXIII

DEFF Research Database (Denmark)

Vorpahl, Fabian; Strobel, Michael; Jonkman, Jason M.

2014-01-01

with the incident waves, sea current, hydrodynamics and foundation dynamics of the support structure. A large set of time series simulation results such as turbine operational characteristics, external conditions, and load and displacement outputs was compared and interpreted. Load cases were defined and run...... to differences in the model fidelity, aerodynamic implementation, hydrodynamic load discretization and numerical difficulties within the codes. The comparisons resulted in a more thorough understanding of the modeling techniques and better knowledge of when various approximations are not valid.More importantly...... is to summarize the lessons learned and present results that code developers can compare to. The set of benchmark load cases defined and simulated during the course of this project—the raw data for this paper—is available to the offshore wind turbine simulation community and is already being used for testing...

Determination of Biology Department Students' Past Field Trip Experiences and Examination of Their Self-Efficacy Beliefs in Planning and Organising Educational Field Trips

Science.gov (United States)

Bozdogan, Aykut Emre

2015-01-01

The purpose of this study is to determine the past field trip experiences of pre-service teachers who are graduates of Faculty of Sciences, Department of Biology and who had pedagogical formation training certificate and to examine their self-efficacy beliefs in planning and organizing field trips with regard to different variables. The study was…

Hydraulic turbines

International Nuclear Information System (INIS)

Meluk O, G.

1998-01-01

The hydraulic turbines are defined according to the specific speed, in impulse turbines and in reaction turbines. Currently, the Pelton turbines (of impulse) and the Francis and Kaplan turbines (of reaction), they are the most important machines in the hydroelectric generation. The hydraulic turbines are capable of generating in short times, large powers, from its loads zero until the total load and reject the load instantly without producing damages in the operation. When the hydraulic resources are important, the hydraulic turbines are converted in the axle of the electric system. Its combination with thermoelectric generation systems, it allow the continuing supply of the variations in demand of energy system. The available hydraulic resource in Colombia is of 93085 MW, of which solely 9% is exploited, become 79% of all the electrical country generation, 21% remaining is provided by means of the thermoelectric generation

Remote condition-based monitoring of turbines

International Nuclear Information System (INIS)

2005-01-01

specific point in time; Timewave: Amount of motion and symmetry of wave shape (i.e., a truncated wave can be an indication of a rub); Orbits: A cross-sectional view of shaft movement; DC Gap Voltage: A measurement of the distance (e.g., gap) between the shaft and the proximity probes. This value is useful in determining bearing wear of shaft centerline location. Daily monitoring of these metrics will not only warn of impending failure, but provide valuable information regarding the possible cause of the impending failure and an approximate indication of time to failure. In the event of a sudden problem and subsequent trip of a turbine, this data helps determine the root cause of the failure. This results in faster problem resolution and a quicker restart of the turbine. Additionally, daily monitoring of these metrics allows companies to watch a problematic turbine's health until the next scheduled outage. Azima's remote, condition-based monitoring system and diagnostics service is an effective way to collect and trend these metrics on a daily basis, as well as supply expert advice in the event of any anomalies. The Azima system aggregates the analog data from the proximity probes mounted on the turbine at a sensor hub. The sensor hub digitizes the analog data and then, either wirelessly or through a wired Ethernet connection, sends the data via the Internet to a hosted server. The hosted server maintains the software that trends the data (e.g., vibration, spectrum, timewave, DC gap voltage, and orbits) and provides automatic alerting. The data can be accessed anywhere, anytime through a standard Web browser. The advantages of daily, remote, condition-based monitoring include: Daily monitoring of vital turbine health metrics to detect impending problems before they become critical; Automatic alerting when a change in condition is detected; Anywhere, anytime access via a standard Web browser. This allows multiple groups at different locations to simultaneously review and

Benchmark selection

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Tvede, Mich

2002-01-01

Within a production theoretic framework, this paper considers an axiomatic approach to benchmark selection. It is shown that two simple and weak axioms; efficiency and comprehensive monotonicity characterize a natural family of benchmarks which typically becomes unique. Further axioms are added...... in order to obtain a unique selection...

Does ignoring multidestination trips in the travel cost method cause a systematic bias?

NARCIS (Netherlands)

Kuosmanen, T.K.; Nillesen, E.E.M.; Wesseler, J.H.H.

2004-01-01

The present paper demonstrates that treating multidestination trips (MDT) as single-destination trips does not involve any systematic upward or downward bias in consumer surplus (CS) estimates because the direct negative effect of a price increase (treating MDT as a single-destination trip) is

Benchmarking school nursing practice: the North West Regional Benchmarking Group

OpenAIRE

Littler, Nadine; Mullen, Margaret; Beckett, Helen; Freshney, Alice; Pinder, Lynn

2016-01-01

It is essential that the quality of care is reviewed regularly through robust processes such as benchmarking to ensure all outcomes and resources are evidence-based so that children and young people’s needs are met effectively. This article provides an example of the use of benchmarking in school nursing practice. Benchmarking has been defined as a process for finding, adapting and applying best practices (Camp, 1994). This concept was first adopted in the 1970s ‘from industry where it was us...

Turbine main engines

CERN Document Server

Main, John B; Herbert, C W; Bennett, A J S

1965-01-01

Turbine Main Engines deals with the principle of operation of turbine main engines. Topics covered include practical considerations that affect turbine design and efficiency; steam turbine rotors, blades, nozzles, and diaphragms; lubricating oil systems; and gas turbines for use with nuclear reactors. Gas turbines for naval boost propulsion, merchant ship propulsion, and naval main propulsion are also considered. This book is divided into three parts and begins with an overview of the basic mode of operation of the steam turbine engine and how it converts the pressure energy of the ingoing ste

The AAA+ ATPase TRIP13 remodels HORMA domains through N-terminal engagement and unfolding

Energy Technology Data Exchange (ETDEWEB)

Ye, Qiaozhen; Kim, Dong Hyun; Dereli, Ihsan; Rosenberg, Scott C.; Hagemann, Goetz; Herzog, Franz; Tóth, Attila; Cleveland, Don W.; Corbett, Kevin D.

2017-06-28

Proteins of the conserved HORMA domain family, including the spindle assembly checkpoint protein MAD2 and the meiotic HORMADs, assemble into signaling complexes by binding short peptides termed “closure motifs”. The AAA+ ATPase TRIP13 regulates both MAD2 and meiotic HORMADs by disassembling these HORMA domain–closure motif complexes, but its mechanisms of substrate recognition and remodeling are unknown. Here, we combine X-ray crystallography and crosslinking mass spectrometry to outline how TRIP13 recognizes MAD2 with the help of the adapter protein p31comet. We show that p31comet binding to the TRIP13 N-terminal domain positions the disordered MAD2 N-terminus for engagement by the TRIP13 “pore loops”, which then unfold MAD2 in the presence of ATP. N-terminal truncation of MAD2 renders it refractory to TRIP13 action in vitro, and in cells causes spindle assembly checkpoint defects consistent with loss of TRIP13 function. Similar truncation of HORMAD1 in mouse spermatocytes compromises its TRIP13-mediated removal from meiotic chromosomes, highlighting a conserved mechanism for recognition and disassembly of HORMA domain–closure motif complexes by TRIP13.

ZZ-PBMR-400, OECD/NEA PBMR Coupled Neutronics/Thermal Hydraulics Transient Benchmark - The PBMR-400 Core Design

International Nuclear Information System (INIS)

Reitsma, Frederik

2007-01-01

efficiency: ≥ 41%; Emergency planning zone: 400 meters. The PBMR functions under a direct Brayton cycle with primary coolant helium flowing downward through the core and exiting at 900 C. The helium then enters the turbine relinquishing energy to drive the electric generator and compressors. After leaving the turbine, the helium then passes consecutively through the LP primary side of the recuperator, then the pre-cooler, the low pressure compressor, inter-cooler, high pressure compressor and then on to the HP secondary side of the recuperator before re-entering the reactor vessel at 500 C. Power is adjusted by regulating the mass flow rate of gas inside the primary circuit. This is achieved by a combination of compressor bypass and system pressure changes. Increasing the pressure results in an increase in mass flow rate, which results in an increase in the power removed from the core. Power reduction is achieved by removing gas from the circuit. A Helium Inventory Control System is used to provide an increase or decrease in system pressure. The benchmark is divided into Phases and Exercises as follows: Phase I: Steady State Benchmark Calculational Cases; Exercise 1: Neutronics Solution with Fixed Cross Sections ; Exercise 2: Thermal Hydraulic solution with given power / heat sources; Exercise 3: Combined neutronics thermal hydraulics calculation - starting condition for the transients. Phase II: Transient benchmark: Exercise 1: De-pressurised Loss of Forced Cooling (DLOFC) without SCRAM; Exercise 2 : De-pressurised Loss of Forced Cooling (DLOFC) with SCRAM; Exercise 3: Pressurised Loss of Forced Cooling (PLOFC) with SCRAM; Exercise 4 : 100-40-100 Load Follow; Exercise 5: Fast Reactivity Insertion - Control Rod Withdrawal (CRW) and Control Rod Ejection (CRE) scenarios at hot full power conditions; Exercise 6 : Cold Helium Inlet

Turbinate surgery

Science.gov (United States)

Turbinectomy; Turbinoplasty; Turbinate reduction; Nasal airway surgery; Nasal obstruction - turbinate surgery ... There are several types of turbinate surgery: Turbinectomy: All or ... This can be done in several different ways, but sometimes a ...

TRIP-Br2 promotes oncogenesis in nude mice and is frequently overexpressed in multiple human tumors.

Science.gov (United States)

Cheong, Jit Kong; Gunaratnam, Lakshman; Zang, Zhi Jiang; Yang, Christopher M; Sun, Xiaoming; Nasr, Susan L; Sim, Khe Guan; Peh, Bee Keow; Rashid, Suhaimi Bin Abdul; Bonventre, Joseph V; Salto-Tellez, Manuel; Hsu, Stephen I

2009-01-20

Members of the TRIP-Br/SERTAD family of mammalian transcriptional coregulators have recently been implicated in E2F-mediated cell cycle progression and tumorigenesis. We, herein, focus on the detailed functional characterization of the least understood member of the TRIP-Br/SERTAD protein family, TRIP-Br2 (SERTAD2). Oncogenic potential of TRIP-Br2 was demonstrated by (1) inoculation of NIH3T3 fibroblasts, which were engineered to stably overexpress ectopic TRIP-Br2, into athymic nude mice for tumor induction and (2) comprehensive immunohistochemical high-throughput screening of TRIP-Br2 protein expression in multiple human tumor cell lines and human tumor tissue microarrays (TMAs). Clinicopathologic analysis was conducted to assess the potential of TRIP-Br2 as a novel prognostic marker of human cancer. RNA interference of TRIP-Br2 expression in HCT-116 colorectal carcinoma cells was performed to determine the potential of TRIP-Br2 as a novel chemotherapeutic drug target. Overexpression of TRIP-Br2 is sufficient to transform murine fibroblasts and promotes tumorigenesis in nude mice. The transformed phenotype is characterized by deregulation of the E2F/DP-transcriptional pathway through upregulation of the key E2F-responsive genes CYCLIN E, CYCLIN A2, CDC6 and DHFR. TRIP-Br2 is frequently overexpressed in both cancer cell lines and multiple human tumors. Clinicopathologic correlation indicates that overexpression of TRIP-Br2 in hepatocellular carcinoma is associated with a worse clinical outcome by Kaplan-Meier survival analysis. Small interfering RNA-mediated (siRNA) knockdown of TRIP-Br2 was sufficient to inhibit cell-autonomous growth of HCT-116 cells in vitro. This study identifies TRIP-Br2 as a bona-fide protooncogene and supports the potential for TRIP-Br2 as a novel prognostic marker and a chemotherapeutic drug target in human cancer.

Medical and pharmacy student concerns about participating on international service-learning trips

OpenAIRE

Chuang, Chih; Khatri, Siddique H.; Gill, Manpal S.; Trehan, Naveen; Masineni, Silpa; Chikkam, Vineela; Farah, Guillaume G.; Khan, Amber; Levine, Diane L.

2015-01-01

Background International Service Learning Trips (ISLT) provide health professional students the opportunity to provide healthcare, under the direction of trained faculty, to underserved populations in developing countries. Despite recent increases in international service learning trips, there is scant literature addressing concerns students have prior to attending such trips. This study focuses on identifying concerns before and after attending an ISLT and their impact on students. Methods A...

Power Trip Set-points of Reactor Protection System for New Research Reactor

International Nuclear Information System (INIS)

Lee, Byeonghee; Yang, Soohyung

2013-01-01

This paper deals with the trip set-point related to the reactor power considering the reactivity induced accident (RIA) of new research reactor. The possible scenarios of reactivity induced accidents were simulated and the effects of trip set-point on the critical heat flux ratio (CHFR) were calculated. The proper trip set-points which meet the acceptance criterion and guarantee sufficient margins from normal operation were then determined. The three different trip set-points related to the reactor power are determined based on the RIA of new research reactor during FP condition, over 0.1%FP and under 0.1%FP. Under various reactivity insertion rates, the CHFR are calculated and checked whether they meet the acceptance criterion. For RIA at FP condition, the acceptance criterion can be satisfied even if high power set-point is only used for reactor trip. Since the design of the reactor is still progressing and need a safety margin for possible design changes, 18 MW is recommended as a high power set-point. For RIA at 0.1%FP, high power setpoint of 18 MW and high log rate of 10%pp/s works well and acceptance criterion is satisfied. For under 0.1% FP operations, the application of high log rate is necessary for satisfying the acceptance criterion. Considering possible decrease of CHFR margin due to design changes, the high log rate is suggested to be 8%pp/s. Suggested trip set-points have been identified based on preliminary design data for new research reactor; therefore, these trip set-points will be re-established by considering design progress of the reactor. The reactor protection system (RPS) of new research reactor is designed for safe shutdown of the reactor and preventing the release of radioactive material to environment. The trip set point of RPS is essential for reactor safety, therefore should be determined to mitigate the consequences from accidents. At the same time, the trip set-point should secure margins from normal operational condition to avoid

Turbine repair process, repaired coating, and repaired turbine component

Science.gov (United States)

Das, Rupak; Delvaux, John McConnell; Garcia-Crespo, Andres Jose

2015-11-03

A turbine repair process, a repaired coating, and a repaired turbine component are disclosed. The turbine repair process includes providing a turbine component having a higher-pressure region and a lower-pressure region, introducing particles into the higher-pressure region, and at least partially repairing an opening between the higher-pressure region and the lower-pressure region with at least one of the particles to form a repaired turbine component. The repaired coating includes a silicon material, a ceramic matrix composite material, and a repaired region having the silicon material deposited on and surrounded by the ceramic matrix composite material. The repaired turbine component a ceramic matrix composite layer and a repaired region having silicon material deposited on and surrounded by the ceramic matrix composite material.

Methods for analysis of passenger trip performance in a complex networked transportation system

Science.gov (United States)

Wang, Danyi

2007-12-01

The purpose of the Air Transportation System (ATS) is to provide safe and efficient transportation service of passengers and cargo. The on-time performance of a passenger's trip is a critical performance measurement of the Quality of Service (QOS) provided by any Air Transportation System. QOS has been correlated with airline profitability, productivity, customer loyalty and customer satisfaction (Heskett et al. 1994). Btatu and Barnhart have shown that official government and airline on-time performance metrics (i.e. flight-centric measures of air transportation) fail to accurately reflect the passenger experience (Btatu and Barnhart, 2005). Flight-based metrics do not include the trip delays accrued by passengers who were re-booked due to cancelled flights or missed connections. Also, flight-based metrics do not quantify the magnitude of the delay (only the likelihood) and thus fails to provide the consumer with a useful assessment of the impact of a delay. Passenger-centric metrics have not been developed because of the unavailability of airline proprietary data, which is also protected by anti-trust collusion concerns and civil liberty privacy restrictions. Moveover, the growth of the ATS is trending out of the historical range. The objectives of this research were to (1) estimate ATS-wide passenger trip delay using publicly accessible flight data, and (2) investigate passenger trip dynamics out of the range of historical data by building a passenger flow simulation model to predict impact on passenger trip time given anticipated changes in the future. The first objective enables researchers to conduct historical analysis on passenger on-time performance without proprietary itinerary data, and the second objective enables researchers to conduct experiments outside the range of historic data. The estimated passenger trip delay was for 1,030 routes between the 35 busiest airports in the United States in 2006. The major findings of this research are listed as

Risk assessment to determine the advisability of seismic trip systems

International Nuclear Information System (INIS)

Cummings, G.E.; Wells, J.E.

1977-01-01

Seismic trip (scram) systems have been used for many years on certain research, test, and production reactors, but not on commercial power reactors. An assessment is made of the risks associated with the presence and absence of such trip systems on power reactors. An attempt was made to go beyond the reactor per se and to consider the risks to society as a whole; for example, the advantages of tripping to avoid an earthquake-caused accident were weighed against the disadvantages associated with interrupting electric power in a time when it would be needed for emergency services. The comparative risk assessment was performed by means of fault tree analysis

Interactive benchmarking

DEFF Research Database (Denmark)

Lawson, Lartey; Nielsen, Kurt

2005-01-01

We discuss individual learning by interactive benchmarking using stochastic frontier models. The interactions allow the user to tailor the performance evaluation to preferences and explore alternative improvement strategies by selecting and searching the different frontiers using directional...... in the suggested benchmarking tool. The study investigates how different characteristics on dairy farms influences the technical efficiency....

Verification and validation benchmarks.

Energy Technology Data Exchange (ETDEWEB)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-02-01

Verification and validation (V&V) are the primary means to assess the accuracy and reliability of computational simulations. V&V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V&V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the level of

Analysis of reactor trips involving balance-of-plant failures

International Nuclear Information System (INIS)

Seth, S.; Skinner, L.; Ettlinger, L.; Lay, R.

1986-01-01

The relatively high frequency of plant transients leading to reactor trips at nuclear power plants in the US is of economic and safety concern to the industry. A majority of such transients is due to failures in the balance-of-plant (BOP) systems. As a part of a study conducted for the US Nuclear Regulatory Commission, Mitre has carried out a further analysis of the BOP failures associated with reactor trips. The major objectives of the analysis were to examine plant-to-plant variations in BOP-related trips, to understand the causes of failures, and to determine the extent of any associated safety system challenges. The analysis was based on the Licensee Event Reports submitted on all commercial light water reactors during the 2-yr period, 1984-1985

Predictors of trips to food destinations

Directory of Open Access Journals (Sweden)

Kerr Jacqueline

2012-05-01

Full Text Available Abstract Background Food environment studies have focused on ethnic and income disparities in food access. Few studies have investigated distance travelled for food and did not aim to inform the geographic scales at which to study the relationship between food environments and obesity. Further, studies have not considered neighborhood design as a predictor of food purchasing behavior. Methods Atlanta residents (N = 4800 who completed a travel diary and reported purchasing or consuming food at one of five food locations were included in the analyses. A total of 11,995 food-related trips were reported. Using mixed modeling to adjust for clustering of trips by participants and households, person-level variables (e.g. demographics, neighborhood-level urban form measures, created in GIS, and trip characteristics (e.g. time of day, origin and destination were investigated as correlates of distance travelled for food and frequency of grocery store and fast food outlet trips. Results Mean travel distance for food ranged from 4.5 miles for coffee shops to 6.3 miles for superstores. Type of store, urban form, type of tour, day of the week and ethnicity were all significantly related to distance travelled for food. Origin and destination environment, type of tour, day of week, age, gender, income, ethnicity, vehicle access and obesity status were all significantly related to visiting a grocery store. Home neighborhood environment, day of week, type of tour, gender, income, education level, age, and obesity status were all significantly related to likelihood of visiting a fastfood outlet. Conclusions The present study demonstrated that people travel sizeable distances for food and this distance is related to urban. Results suggest that researchers need to employ different methods to characterize food environments than have been used to assess urban form in studies of physical activity. Food is most often purchased while traveling from locations other

The KMAT: Benchmarking Knowledge Management.

Science.gov (United States)

de Jager, Martha

Provides an overview of knowledge management and benchmarking, including the benefits and methods of benchmarking (e.g., competitive, cooperative, collaborative, and internal benchmarking). Arthur Andersen's KMAT (Knowledge Management Assessment Tool) is described. The KMAT is a collaborative benchmarking tool, designed to help organizations make…

Thermal hydro-dynamic behavior of the nuclear-powered ship Mutsu in the power-up test

International Nuclear Information System (INIS)

Ishida, Toshihisa; Kusunoki, Tsuyoshi; Tanaka, Yoshimi; Yao, Toshiaki; Inoue, Kimio; Ochiai, Masa-aki

1991-01-01

The first Japanese nuclear ship N.S. Mutsu was tested with heavy load changes as ones of the full scale start-up tests. This paper describes the results of power increasing test, test of crash astern propulsion from ahead cruising, and turbine trip test; In the power increasing test, the main steam flow rate increased from 20 % flow to 70 % flow in 13 seconds; In the test of crash astern propulsion from ahead cruising, an astern turbine maneuvering handle was drawn to the position equivalent to about 60 % reactor power in 30 seconds after an ahead turbine stopping; In the turbine trip test, the ahead turbine was tripped manually at about 100 % power operation. From these tests it was verified that the Mutsu reactor is capable to respond smoothly and safely to the heavy load change without reactor scram, without workings of the pressurizer relief valve and main steam dump valve, and without need of any manual adjustment of the reactor control system. (author)

Benchmarking in Mobarakeh Steel Company

OpenAIRE

Sasan Ghasemi; Mohammad Nazemi; Mehran Nejati

2008-01-01

Benchmarking is considered as one of the most effective ways of improving performance in companies. Although benchmarking in business organizations is a relatively new concept and practice, it has rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan's Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aims to share the process deployed for the benchmarking project in this company and illustrate how th...

Field Trips and the Law.

Science.gov (United States)

Troy, Thomas D.; Schwaab, Karl E.

1981-01-01

Legal aspects of field trips are addressed, with special attention on planning and implementation aspects which warrant legal consideration. Suggestions are based on information obtained from studies which reviewed and analyzed court cases, with recommendations geared to lessen the likelihood that negligence suits will result if students sustain…

Elastic tripping analysis of corroded stiffeners in stiffened plate with irregular surfaces

Energy Technology Data Exchange (ETDEWEB)

Rahbarranji, Ahmad [AmirKabir University of Technology, Tehran (Iran, Islamic Republic of)

2014-09-15

Tripping of stiffeners is one of the buckling modes of stiffened panels which could rapidly lead to its catastrophic failure. Loss of thickness in the web and flange of stiffeners due to corrosion reduces elastic buckling strength. It is common practice to assume a uniform thickness reduction for corroded surfaces. To estimate the remaining strength of a corroded structure, a much higher level of accuracy is required since corroded surfaces are irregular. Finite element method is employed to analyze elastic tripping stress of corroded stiffeners with irregular surfaces. Comparing the results with elastic tripping stress of un-corroded stiffener, a reduction factor is introduced. It is found that for flat-bars and angle-bars the reduction factor increases by increasing corrosion loss; however, for tee-bars remains almost unchanged. Surface roughness has no significant effect on reduction of tripping Euler stress of angle-bars and flat-bars; however, it has an effect on reduction of tripping Euler stress of small flat-bars. For high values of corrosion loss, reduction of tripping Euler stress is higher in flat-bars than angle-bars. Corrosion at the mid-length or ends of flat-bars is more detrimental than full length. Corrosion at the ends of angle-bars is more detrimental than full length and mid-length.

TRIP-Br2 promotes oncogenesis in nude mice and is frequently overexpressed in multiple human tumors

Directory of Open Access Journals (Sweden)

Peh Bee

2009-01-01

Full Text Available Abstract Background Members of the TRIP-Br/SERTAD family of mammalian transcriptional coregulators have recently been implicated in E2F-mediated cell cycle progression and tumorigenesis. We, herein, focus on the detailed functional characterization of the least understood member of the TRIP-Br/SERTAD protein family, TRIP-Br2 (SERTAD2. Methods Oncogenic potential of TRIP-Br2 was demonstrated by (1 inoculation of NIH3T3 fibroblasts, which were engineered to stably overexpress ectopic TRIP-Br2, into athymic nude mice for tumor induction and (2 comprehensive immunohistochemical high-throughput screening of TRIP-Br2 protein expression in multiple human tumor cell lines and human tumor tissue microarrays (TMAs. Clinicopathologic analysis was conducted to assess the potential of TRIP-Br2 as a novel prognostic marker of human cancer. RNA interference of TRIP-Br2 expression in HCT-116 colorectal carcinoma cells was performed to determine the potential of TRIP-Br2 as a novel chemotherapeutic drug target. Results Overexpression of TRIP-Br2 is sufficient to transform murine fibroblasts and promotes tumorigenesis in nude mice. The transformed phenotype is characterized by deregulation of the E2F/DP-transcriptional pathway through upregulation of the key E2F-responsive genes CYCLIN E, CYCLIN A2, CDC6 and DHFR. TRIP-Br2 is frequently overexpressed in both cancer cell lines and multiple human tumors. Clinicopathologic correlation indicates that overexpression of TRIP-Br2 in hepatocellular carcinoma is associated with a worse clinical outcome by Kaplan-Meier survival analysis. Small interfering RNA-mediated (siRNA knockdown of TRIP-Br2 was sufficient to inhibit cell-autonomous growth of HCT-116 cells in vitro. Conclusion This study identifies TRIP-Br2 as a bona-fide protooncogene and supports the potential for TRIP-Br2 as a novel prognostic marker and a chemotherapeutic drug target in human cancer.

Small break LOCA analysis for RCP trip strategy for YGN 3 and 4 emergency procedure guidelines

International Nuclear Information System (INIS)

Suh, Jong Tae; Bae, Kyoo Hwan

1995-01-01

A continued operation of RCPs during a certain small break LOCA may increase unnecessary inventory loss from the RCS causing a severe core uncovery which might lead to a fuel failure. After TMI-2 accident, the CEOG developed RCP trip strategy called 'Trip-Two/Leave-Two' (T2/L2) in response to NRC requests and incorporated it in the generic EPG for CE plants. The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis determines the RCP trip setpoint and demonstrates the safe operational aspects of RCP trip strategy during a small break LOCA for YGN 3 and 4. The trip setpoint of the first two RCPs for YGN 3 and 4 is calculated to be 1775 psia in pressurizer pressure based on the limiting small break LOCA with 0.15 ft 2 break size in the hot leg. The analysis results show that YGN 3 and 4 can maintain the core coolability even if the operator fails to trip the second two RCPs or trips at worst time. Also, the YGN 3 and 4 RCP trip strategy demonstrates that both the 10 CFR 50.46 requirements on PCT and the ANSI standards 58.8 requirements on operator action time can be satisfied with enough margin. Therefore, it is concluded that the T2/L2 RCP trip strategy with a trip setpoint of 1775 psia for YGN 3 and 4 can provide improved operator guidance for the RCP operation during accidents. 11 figs., 4 tabs., 9 refs. (Author)

How Activists Use Benchmarks

DEFF Research Database (Denmark)

Seabrooke, Leonard; Wigan, Duncan

2015-01-01

Non-governmental organisations use benchmarks as a form of symbolic violence to place political pressure on firms, states, and international organisations. The development of benchmarks requires three elements: (1) salience, that the community of concern is aware of the issue and views...... are put to the test. The first is a reformist benchmarking cycle where organisations defer to experts to create a benchmark that conforms with the broader system of politico-economic norms. The second is a revolutionary benchmarking cycle driven by expert-activists that seek to contest strong vested...... interests and challenge established politico-economic norms. Differentiating these cycles provides insights into how activists work through organisations and with expert networks, as well as how campaigns on complex economic issues can be mounted and sustained....

Influence of Field Trip on the Development of Students Interest ...

African Journals Online (AJOL)

Result of the study showed that; field trip increased students' interest towards studying fine and applied art theory and practicals. Male interest towards studying fine and applied art after embarking on field trip is slightly higher than their female counterpart but the difference is not significant at 0.05 alpha level under 56 ...

Benchmarking in Mobarakeh Steel Company

Directory of Open Access Journals (Sweden)

Sasan Ghasemi

2008-05-01

Full Text Available Benchmarking is considered as one of the most effective ways of improving performance incompanies. Although benchmarking in business organizations is a relatively new concept and practice, ithas rapidly gained acceptance worldwide. This paper introduces the benchmarking project conducted in Esfahan’s Mobarakeh Steel Company, as the first systematic benchmarking project conducted in Iran. It aimsto share the process deployed for the benchmarking project in this company and illustrate how the projectsystematic implementation led to succes.

Nuevos atrayentes de trips ayudan a los agricultores en el control de plagas

NARCIS (Netherlands)

Tol, van R.W.H.M.; Kogel, de W.J.; Teulon, D.

2007-01-01

Los trips constituyen una plaga importante que afecta a muchos cultivos diferentes. El año pasado se probaron con éxito, en situaciones prácticas, aromas atrayentes de trips de las flores y trips de la cebolla. El producto, que estará a disposición de los cultivadores en junio, resultó efectivo en

Aquatic Life Benchmarks

Data.gov (United States)

U.S. Environmental Protection Agency — The Aquatic Life Benchmarks is an EPA-developed set of criteria for freshwater species. These benchmarks are based on toxicity values reviewed by EPA and used in the...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of bench-marking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

Regulatory Benchmarking

DEFF Research Database (Denmark)

Agrell, Per J.; Bogetoft, Peter

2017-01-01

Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators. The appli......Benchmarking methods, and in particular Data Envelopment Analysis (DEA), have become well-established and informative tools for economic regulation. DEA is now routinely used by European regulators to set reasonable revenue caps for energy transmission and distribution system operators....... The application of benchmarking in regulation, however, requires specific steps in terms of data validation, model specification and outlier detection that are not systematically documented in open publications, leading to discussions about regulatory stability and economic feasibility of these techniques...

The SMS-GPS-Trip-Method

DEFF Research Database (Denmark)

Reinau, Kristian Hegner; Harder, Henrik; Weber, Michael

2015-01-01

This article presents a new method for collecting travel behavior data, based on a combination of GPS tracking and SMS technology, coined the SMS–GPS-Trip method. The state-of-the-art method for collecting data for activity based traffic models is a combination of travel diaries and GPS tracking...

Three-Dimensional Flow Field Measurements in a Transonic Turbine Cascade

Science.gov (United States)

Giel, P. W.; Thurman, D. R.; Lopez, I.; Boyle, R. J.; VanFossen, G. J.; Jett, T. A.; Camperchioli, W. P.; La, H.

1996-01-01

Three-dimensional flow field measurements are presented for a large scale transonic turbine blade cascade. Flow field total pressures and pitch and yaw flow angles were measured at an inlet Reynolds number of 1.0 x 10(exp 6) and at an isentropic exit Mach number of 1.3 in a low turbulence environment. Flow field data was obtained on five pitchwise/spanwise measurement planes, two upstream and three downstream of the cascade, each covering three blade pitches. Three-hole boundary layer probes and five-hole pitch/yaw probes were used to obtain data at over 1200 locations in each of the measurement planes. Blade and endwall static pressures were also measured at an inlet Reynolds number of 0.5 x 10(exp 6) and at an isentropic exit Mach number of 1.0. Tests were conducted in a linear cascade at the NASA Lewis Transonic Turbine Blade Cascade Facility. The test article was a turbine rotor with 136 deg of turning and an axial chord of 12.7 cm. The flow field in the cascade is highly three-dimensional as a result of thick boundary layers at the test section inlet and because of the high degree of flow turning. The large scale allowed for very detailed measurements of both flow field and surface phenomena. The intent of the work is to provide benchmark quality data for CFD code and model verification.

Assessment of vehicle trip production rates in Ilorin (Nigeria) | Jimoh ...

African Journals Online (AJOL)

Occupation, age, gender, income lev-el, vehicle ownership, trip length and fare structure affected the total trip generation, with an average production rate of 3.5, in the range of 2.79 - 4.29. The lower rate was characteristic of school children (5 - 15 years), while the highest rate was attributed to affluent and elderly persons ...

Benchmarking and the laboratory

Science.gov (United States)

Galloway, M; Nadin, L

2001-01-01

This article describes how benchmarking can be used to assess laboratory performance. Two benchmarking schemes are reviewed, the Clinical Benchmarking Company's Pathology Report and the College of American Pathologists' Q-Probes scheme. The Clinical Benchmarking Company's Pathology Report is undertaken by staff based in the clinical management unit, Keele University with appropriate input from the professional organisations within pathology. Five annual reports have now been completed. Each report is a detailed analysis of 10 areas of laboratory performance. In this review, particular attention is focused on the areas of quality, productivity, variation in clinical practice, skill mix, and working hours. The Q-Probes scheme is part of the College of American Pathologists programme in studies of quality assurance. The Q-Probes scheme and its applicability to pathology in the UK is illustrated by reviewing two recent Q-Probe studies: routine outpatient test turnaround time and outpatient test order accuracy. The Q-Probes scheme is somewhat limited by the small number of UK laboratories that have participated. In conclusion, as a result of the government's policy in the UK, benchmarking is here to stay. Benchmarking schemes described in this article are one way in which pathologists can demonstrate that they are providing a cost effective and high quality service. Key Words: benchmarking • pathology PMID:11477112

Benchmarking for Higher Education.

Science.gov (United States)

Jackson, Norman, Ed.; Lund, Helen, Ed.

The chapters in this collection explore the concept of benchmarking as it is being used and developed in higher education (HE). Case studies and reviews show how universities in the United Kingdom are using benchmarking to aid in self-regulation and self-improvement. The chapters are: (1) "Introduction to Benchmarking" (Norman Jackson…

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William Louis; Trucano, Timothy Guy

2007-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Verification and validation benchmarks

International Nuclear Information System (INIS)

Oberkampf, William L.; Trucano, Timothy G.

2008-01-01

Verification and validation (V and V) are the primary means to assess the accuracy and reliability of computational simulations. V and V methods and procedures have fundamentally improved the credibility of simulations in several high-consequence fields, such as nuclear reactor safety, underground nuclear waste storage, and nuclear weapon safety. Although the terminology is not uniform across engineering disciplines, code verification deals with assessing the reliability of the software coding, and solution verification deals with assessing the numerical accuracy of the solution to a computational model. Validation addresses the physics modeling accuracy of a computational simulation by comparing the computational results with experimental data. Code verification benchmarks and validation benchmarks have been constructed for a number of years in every field of computational simulation. However, no comprehensive guidelines have been proposed for the construction and use of V and V benchmarks. For example, the field of nuclear reactor safety has not focused on code verification benchmarks, but it has placed great emphasis on developing validation benchmarks. Many of these validation benchmarks are closely related to the operations of actual reactors at near-safety-critical conditions, as opposed to being more fundamental-physics benchmarks. This paper presents recommendations for the effective design and use of code verification benchmarks based on manufactured solutions, classical analytical solutions, and highly accurate numerical solutions. In addition, this paper presents recommendations for the design and use of validation benchmarks, highlighting the careful design of building-block experiments, the estimation of experimental measurement uncertainty for both inputs and outputs to the code, validation metrics, and the role of model calibration in validation. It is argued that the understanding of predictive capability of a computational model is built on the

Large Pelagic Logbook Trip Survey (Vessels)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...... applications. The present study analyses voluntary benchmarking in a public setting that is oriented towards learning. The study contributes by showing how benchmarking can be mobilised for learning and offers evidence of the effects of such benchmarking for performance outcomes. It concludes that benchmarking...... can enable learning in public settings but that this requires actors to invest in ensuring that benchmark data are directed towards improvement....

An Evaluation of Telecommuting As a Trip Reduction Measure

OpenAIRE

Kitamura, Ryuichi; Mokhtarian, Patricia L.; Pendyala, Ram M.

1991-01-01

Telecommuting, which is the performance of work at home or at a center close to home using telecommunications, has attracted growing interest among planners and researchers as a strategy for reducing traveldemand. This paper investigates the potential of telecommuting as a trip reduction measure, using data obtained from a telecommuting pilot project involving State of California government employees. In this pilot project, a three-day trip diary was administered, before and after te...

Steam turbine cycle

International Nuclear Information System (INIS)

Okuzumi, Naoaki.

1994-01-01

In a steam turbine cycle, steams exhausted from the turbine are extracted, and they are connected to a steam sucking pipe of a steam injector, and a discharge pipe of the steam injector is connected to an inlet of a water turbine. High pressure discharge water is obtained from low pressure steams by utilizing a pressurizing performance of the steam injector and the water turbine is rotated by the high pressure water to generate electric power. This recover and reutilize discharged heat of the steam turbine effectively, thereby enabling to improve heat efficiency of the steam turbine cycle. (T.M.)

Benchmark job – Watch out!

CERN Multimedia

Staff Association

2017-01-01

On 12 December 2016, in Echo No. 259, we already discussed at length the MERIT and benchmark jobs. Still, we find that a couple of issues warrant further discussion. Benchmark job – administrative decision on 1 July 2017 On 12 January 2017, the HR Department informed all staff members of a change to the effective date of the administrative decision regarding benchmark jobs. The benchmark job title of each staff member will be confirmed on 1 July 2017, instead of 1 May 2017 as originally announced in HR’s letter on 18 August 2016. Postponing the administrative decision by two months will leave a little more time to address the issues related to incorrect placement in a benchmark job. Benchmark job – discuss with your supervisor, at the latest during the MERIT interview In order to rectify an incorrect placement in a benchmark job, it is essential that the supervisor and the supervisee go over the assigned benchmark job together. In most cases, this placement has been done autom...

Benchmarking reference services: an introduction.

Science.gov (United States)

Marshall, J G; Buchanan, H S

1995-01-01

Benchmarking is based on the common sense idea that someone else, either inside or outside of libraries, has found a better way of doing certain things and that your own library's performance can be improved by finding out how others do things and adopting the best practices you find. Benchmarking is one of the tools used for achieving continuous improvement in Total Quality Management (TQM) programs. Although benchmarking can be done on an informal basis, TQM puts considerable emphasis on formal data collection and performance measurement. Used to its full potential, benchmarking can provide a common measuring stick to evaluate process performance. This article introduces the general concept of benchmarking, linking it whenever possible to reference services in health sciences libraries. Data collection instruments that have potential application in benchmarking studies are discussed and the need to develop common measurement tools to facilitate benchmarking is emphasized.

Internet based benchmarking

DEFF Research Database (Denmark)

Bogetoft, Peter; Nielsen, Kurt

2005-01-01

We discuss the design of interactive, internet based benchmarking using parametric (statistical) as well as nonparametric (DEA) models. The user receives benchmarks and improvement potentials. The user is also given the possibility to search different efficiency frontiers and hereby to explore...

Toxicological Benchmarks for Wildlife

Energy Technology Data Exchange (ETDEWEB)

Sample, B.E. Opresko, D.M. Suter, G.W.

1993-01-01

Ecological risks of environmental contaminants are evaluated by using a two-tiered process. In the first tier, a screening assessment is performed where concentrations of contaminants in the environment are compared to no observed adverse effects level (NOAEL)-based toxicological benchmarks. These benchmarks represent concentrations of chemicals (i.e., concentrations presumed to be nonhazardous to the biota) in environmental media (water, sediment, soil, food, etc.). While exceedance of these benchmarks does not indicate any particular level or type of risk, concentrations below the benchmarks should not result in significant effects. In practice, when contaminant concentrations in food or water resources are less than these toxicological benchmarks, the contaminants may be excluded from further consideration. However, if the concentration of a contaminant exceeds a benchmark, that contaminant should be retained as a contaminant of potential concern (COPC) and investigated further. The second tier in ecological risk assessment, the baseline ecological risk assessment, may use toxicological benchmarks as part of a weight-of-evidence approach (Suter 1993). Under this approach, based toxicological benchmarks are one of several lines of evidence used to support or refute the presence of ecological effects. Other sources of evidence include media toxicity tests, surveys of biota (abundance and diversity), measures of contaminant body burdens, and biomarkers. This report presents NOAEL- and lowest observed adverse effects level (LOAEL)-based toxicological benchmarks for assessment of effects of 85 chemicals on 9 representative mammalian wildlife species (short-tailed shrew, little brown bat, meadow vole, white-footed mouse, cottontail rabbit, mink, red fox, and whitetail deer) or 11 avian wildlife species (American robin, rough-winged swallow, American woodcock, wild turkey, belted kingfisher, great blue heron, barred owl, barn owl, Cooper's hawk, and red

The swirl turbine

Science.gov (United States)

Haluza, M.; Pochylý, F.; Rudolf, P.

2012-11-01

In the article is introduced the new type of the turbine - swirl turbine. This turbine is based on opposite principle than Kaplan turbine. Euler equation is satisfied in the form gHηh = -u2vu2. From this equation is seen, that inflow of liquid into the runner is without rotation and on the outflow is a rotation of liquid opposite of rotation of runner. This turbine is suitable for small head and large discharge. Some constructional variants of this turbine are introduced in the article and theoretical aspects regarding losses in the draft tube. The theory is followed by computational simulations in Fluent and experiments using laser Doppler anemometry.

Pump Application as Hydraulic Turbine – Pump as Turbine (PaT)

OpenAIRE

Rusovs, D

2009-01-01

The paper considers pump operation as hydraulic turbine with purpose to produce mechanical power from liquid flow. The Francis hydraulic turbine was selected for comparison with centrifugal pump in reverse operation. Turbine and centrifugal pump velocity triangles were considered with purpose to evaluate PaT efficiency. Shape of impeller blades for turbine and pumps was analysed. Specific speed calculation is carried out with purpose to obtain similarity in pump and turbine description. For ...

Student Self-Reported Learning Outcomes of Field Trips: The pedagogical impact

Science.gov (United States)

Lavie Alon, Nirit; Tal, Tali

2015-05-01

In this study, we used the classification and regression trees (CART) method to draw relationships between student self-reported learning outcomes in 26 field trips to natural environments and various characteristics of the field trip that include variables associated with preparation and pedagogy. We wished to examine the extent to which the preparation for the field trip, its connection to the school curriculum, and the pedagogies used, affect students' self-reported outcomes in three domains: cognitive, affective, and behavioral; and the extent the students' socioeconomic group and the guide's affiliation affect students' reported learning outcomes. Given that most of the field trips were guide-centered, the most important variable that affected the three domains of outcomes was the guide's storytelling. Other variables that showed relationships with self-reported outcomes were physical activity and making connections to everyday life-all of which we defined as pedagogical variables. We found no significant differences in student self-reported outcomes with respect to their socioeconomic group and the guide's organizational affiliation.

Turbine system and adapter

Science.gov (United States)

Hogberg, Nicholas Alvin; Garcia-Crespo, Andres Jose

2017-05-30

A turbine system and adapter are disclosed. The adapter includes a turbine attachment portion having a first geometry arranged to receive a corresponding geometry of a wheelpost of a turbine rotor, and a bucket attachment portion having a second geometry arranged to receive a corresponding geometry of a root portion of a non-metallic turbine bucket. Another adapter includes a turbine attachment portion arranged to receive a plurality of wheelposts of a turbine rotor, and a bucket attachment portion arranged to receive a plurality of non-metallic turbine buckets having single dovetail configuration root portions. The turbine system includes a turbine rotor wheel configured to receive metal buckets, at least one adapter secured to at least one wheelpost on the turbine rotor wheel, and at least one non-metallic bucket secured to the at least one adapter.

Mode, load, and specific climate impact from passenger trips.

Science.gov (United States)

Borken-Kleefeld, Jens; Fuglestvedt, Jan; Berntsen, Terje

2013-07-16

The climate impact from a long-distance trip can easily vary by a factor of 10 per passenger depending on mode choice, vehicle efficiency, and occupancy. In this paper we compare the specific climate impact of long-distance car travel with coach, train, or air trips. We account for both, CO2 emissions and short-lived climate forcers. This particularly affects the ranking of aircraft's climate impact relative to other modes. We calculate the specific impact for the Global Warming Potential and the Global Temperature Change Potential, considering time horizons between 20 and 100 years, and compare with results accounting only for CO2 emissions. The car's fuel efficiency and occupancy are central whether the impact from a trip is as high as from air travel or as low as from train travel. These results can be used for carbon-offsetting schemes, mode choice and transportation planning for climate mitigation.

Are short daily trips compensated by higher leisure mobility?

DEFF Research Database (Denmark)

Næss, Petter

2006-01-01

Studies in several cities have shown that inner-city residents travel shorter distances and use cars less for local transport than suburbanites do. However, according to some authors, a low daily amount of travel is likely to be compensated through more extensive leisure mobility at weekends...... and on holidays. On the basis of a study of residential location and travel in the Copenhagen metropolitan area, this paper addresses the phenomenon of compensatory travel. For travel within ‘weekend trip distance’ from the residence, inner-city living appears to have a certain compensatory effect in the form...... of a higher frequency of medium-distance leisure trips. Probably, this reflects a shortage of nature in the immediate surroundings of the dwelling as well as less leisure time tied to gardening and house maintenance. These compensatory trips imply a slight reduction of the transport-reducing effect of inner...

Benchmarking in academic pharmacy departments.

Science.gov (United States)

Bosso, John A; Chisholm-Burns, Marie; Nappi, Jean; Gubbins, Paul O; Ross, Leigh Ann

2010-10-11

Benchmarking in academic pharmacy, and recommendations for the potential uses of benchmarking in academic pharmacy departments are discussed in this paper. Benchmarking is the process by which practices, procedures, and performance metrics are compared to an established standard or best practice. Many businesses and industries use benchmarking to compare processes and outcomes, and ultimately plan for improvement. Institutions of higher learning have embraced benchmarking practices to facilitate measuring the quality of their educational and research programs. Benchmarking is used internally as well to justify the allocation of institutional resources or to mediate among competing demands for additional program staff or space. Surveying all chairs of academic pharmacy departments to explore benchmarking issues such as department size and composition, as well as faculty teaching, scholarly, and service productivity, could provide valuable information. To date, attempts to gather this data have had limited success. We believe this information is potentially important, urge that efforts to gather it should be continued, and offer suggestions to achieve full participation.

HIGH EFFICIENCY TURBINE

OpenAIRE

VARMA, VIJAYA KRUSHNA

2012-01-01

Varma designed ultra modern and high efficiency turbines which can use gas, steam or fuels as feed to produce electricity or mechanical work for wide range of usages and applications in industries or at work sites. Varma turbine engines can be used in all types of vehicles. These turbines can also be used in aircraft, ships, battle tanks, dredgers, mining equipment, earth moving machines etc, Salient features of Varma Turbines. 1. Varma turbines are simple in design, easy to manufac...

A classical model wind turbine wake “blind test” revisited by remote sensing lidars

DEFF Research Database (Denmark)

Sjöholm, Mikael; Angelou, Nikolas; Nielsen, Morten Busk

2017-01-01

One of the classical model wind turbine wake “blind test” experiments1 conducted in the boundary-layer wind tunnel at NTNU in Trondheim and used for benchmarking of numerical flow models has been revisited by remote sensing lidars in a joint experiment called “Lidars For Wind Tunnels” (L4WT) under...... was D=0.894 m and it was designed for a tip speed ratio (TSR) of 6. However, the TSRs used were 3, 6, and 10 at a free-stream velocity of 10 m/s. Due to geometrical constraints imposed by for instance the locations of the wind tunnel windows, all measurements were performed in the very same vertical...... cross-section of the tunnel and the various down-stream distances of the wake, i.e. 1D, 3D, and 5D were achieved by re-positioning the turbine. The approach used allows for unique studies of the influence of the inherent lidar spatial filtering on previously both experimentally and numerically well...

Benchmarking: applications to transfusion medicine.

Science.gov (United States)

Apelseth, Torunn Oveland; Molnar, Laura; Arnold, Emmy; Heddle, Nancy M

2012-10-01

Benchmarking is as a structured continuous collaborative process in which comparisons for selected indicators are used to identify factors that, when implemented, will improve transfusion practices. This study aimed to identify transfusion medicine studies reporting on benchmarking, summarize the benchmarking approaches used, and identify important considerations to move the concept of benchmarking forward in the field of transfusion medicine. A systematic review of published literature was performed to identify transfusion medicine-related studies that compared at least 2 separate institutions or regions with the intention of benchmarking focusing on 4 areas: blood utilization, safety, operational aspects, and blood donation. Forty-five studies were included: blood utilization (n = 35), safety (n = 5), operational aspects of transfusion medicine (n = 5), and blood donation (n = 0). Based on predefined criteria, 7 publications were classified as benchmarking, 2 as trending, and 36 as single-event studies. Three models of benchmarking are described: (1) a regional benchmarking program that collects and links relevant data from existing electronic sources, (2) a sentinel site model where data from a limited number of sites are collected, and (3) an institutional-initiated model where a site identifies indicators of interest and approaches other institutions. Benchmarking approaches are needed in the field of transfusion medicine. Major challenges include defining best practices and developing cost-effective methods of data collection. For those interested in initiating a benchmarking program, the sentinel site model may be most effective and sustainable as a starting point, although the regional model would be the ideal goal. Copyright © 2012 Elsevier Inc. All rights reserved.

Impacts of energy consumption and emissions on the trip cost without late arrival at the equilibrium state

Science.gov (United States)

Tang, Tie-Qiao; Wang, Tao; Chen, Liang; Shang, Hua-Yan

2017-08-01

In this paper, we apply a car-following model, fuel consumption model, emission model and electricity consumption model to explore the influences of energy consumption and emissions on each commuter's trip costs without late arrival at the equilibrium state. The numerical results show that the energy consumption and emissions have significant impacts on each commuter's trip cost without late arrival at the equilibrium state. The fuel cost and emission cost prominently enhance each commuter's trip cost and the trip cost increases with the number of vehicles, which shows that considering the fuel cost and emission cost in the trip cost will destroy the equilibrium state. However, the electricity cost slightly enhances each commuter's trip cost, but the trip cost is still approximately a constant, which indicates that considering the electricity cost in the trip cost does not destroy the equilibrium state.

THE NETWORK OF CITY PUBLIC TRANSPORT AS THE BASE FOR TRIP LENGTH DISTRIBUTION DETERMINING

Directory of Open Access Journals (Sweden)

P. Horbachov

2015-07-01

Full Text Available The up-to-date methods of modelling the demand for public transport services require an objective estimation and improvement. Such an improvement can be achieved by taking into account the trip length distribution during trip matrix calculation that requires determining the reasons of regularities occurance in city population trip lengths.

The swirl turbine

International Nuclear Information System (INIS)

Haluza, M; Pochylý, F; Rudolf, P

2012-01-01

In the article is introduced the new type of the turbine - swirl turbine. This turbine is based on opposite principle than Kaplan turbine. Euler equation is satisfied in the form gHη h = −u 2 v u2 . From this equation is seen, that inflow of liquid into the runner is without rotation and on the outflow is a rotation of liquid opposite of rotation of runner. This turbine is suitable for small head and large discharge. Some constructional variants of this turbine are introduced in the article and theoretical aspects regarding losses in the draft tube. The theory is followed by computational simulations in Fluent and experiments using laser Doppler anemometry.

Trip Travel Time Forecasting Based on Selective Forgetting Extreme Learning Machine

Directory of Open Access Journals (Sweden)

Zhiming Gui

2014-01-01

Full Text Available Travel time estimation on road networks is a valuable traffic metric. In this paper, we propose a machine learning based method for trip travel time estimation in road networks. The method uses the historical trip information extracted from taxis trace data as the training data. An optimized online sequential extreme machine, selective forgetting extreme learning machine, is adopted to make the prediction. Its selective forgetting learning ability enables the prediction algorithm to adapt to trip conditions changes well. Experimental results using real-life taxis trace data show that the forecasting model provides an effective and practical way for the travel time forecasting.

Small break LOCA analysis for YGN 5 and 6 RCP trip strategy in power mode operation

International Nuclear Information System (INIS)

Kim, Tech Mo; Choi, Han Rim

2001-01-01

A continued operation of Reactor Coolant Pumps(RCPs) during a Small Break Loss of Coolant Accident(SBLOCA) in all operation mode may increase unnecessary inventory loss from the Reactor Coolant System(RCS) causing a severe core uncovery which might lead to fuel failure. After Three Mile Island Unit 2(TMI-2) accident, the Combustion Engineering Owner Group(CEOG) developed RCP trip strategy called 'Trip-Two/Leave-Two' (T2/L2). The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis demonstrates the inherent safety of RCP trip strategy during an SBLOCA for Youggwang Nuclear Power Plant Unit 5 and 6(YGN 5 and 6). The trip setpoint of the first two RCPs for YGN 5 and 6 is calculated to be 1721 psia in pressurizer pressure based on the limiting SBLOCA with 0.15 ft 2 break size in the hot leg. The analysis results show that YGN 5 and 6 can maintain the core coolability even if the operator fails to trip the second two RCPs or trips at the worst time of minimum liquid inventory

AN INTEGRATED MODELING FRAMEWORK FOR ENVIRONMENTALLY EFFICIENT CAR OWNERSHIP AND TRIP BALANCE

Directory of Open Access Journals (Sweden)

Tao FENG

2008-01-01

Full Text Available Urban transport emissions generated by automobile trips are greatly responsible for atmospheric pollution in both developed and developing countries. To match the long-term target of sustainable development, it seems to be important to specify the feasible level of car ownership and travel demand from environmental considerations. This research intends to propose an integrated modeling framework for optimal construction of a comprehensive transportation system by taking into consideration environmental constraints. The modeling system is actually a combination of multiple essential models and illustrated by using a bi-level programming approach. In the upper level, the maximization of both total car ownership and total number of trips by private and public travel modes is set as the objective function and as the constraints, the total emission levels at all the zones are set to not exceed the relating environmental capacities. Maximizing the total trips by private and public travel modes allows policy makers to take into account trip balance to meet both the mobility levels required by travelers and the environmentally friendly transportation system goals. The lower level problem is a combined trip distribution and assignment model incorporating traveler's route choice behavior. A logit-type aggregate modal split model is established to connect the two level problems. In terms of the solution method for the integrated model, a genetic algorithm is applied. A case study is conducted using road network data and person-trip (PT data collected in Dalian city, China. The analysis results showed that the amount of environmentally efficient car ownership and number of trips by different travel modes could be obtained simultaneously when considering the zonal control of environmental capacity within the framework of the proposed integrated model. The observed car ownership in zones could be increased or decreased towards the macroscopic optimization

Medical and pharmacy student concerns about participating on international service-learning trips.

Science.gov (United States)

Chuang, Chih; Khatri, Siddique H; Gill, Manpal S; Trehan, Naveen; Masineni, Silpa; Chikkam, Vineela; Farah, Guillaume G; Khan, Amber; Levine, Diane L

2015-12-23

International Service Learning Trips (ISLT) provide health professional students the opportunity to provide healthcare, under the direction of trained faculty, to underserved populations in developing countries. Despite recent increases in international service learning trips, there is scant literature addressing concerns students have prior to attending such trips. This study focuses on identifying concerns before and after attending an ISLT and their impact on students. A survey comprised of closed and open-ended questions was developed to elucidate student concerns prior to attending an ISLT and experiences which might influence concerns. A five-point Likert-scale (extremely concerned = 1, minimally concerned = 5) was used to rate apprehension and satisfaction. Paired t-test was used to compare pre- and post-trip concerns; Chi-Square test was used to compare groups. Thirty-five students (27 medical, 8 pharmacy) attended ISLTs in December 2013. All completed pre and post-trip surveys. Significant decreases were seen in concerns related to cultural barriers (4.14 vs 4.46, P = .047), disease/epidemics (3.34 vs 4.60, P travel (3.86 vs 4.51, P food (3.83 vs 4.60, P students described benefits of attending an ISLT. Students had multiple concerns prior to attending an ISLT. Most decreased upon return. Addressing concerns has the potential to decrease student apprehension. The results of this study highlight the benefits of providing ISLTs and supporting development of a curriculum incorporating trip-related concerns.

Preliminary Assessment of Noise Pollution Prevention in Wind Turbines Based on an Exergy Approach

Directory of Open Access Journals (Sweden)

Ofelia A. Jianu

2017-06-01

Full Text Available Most existing methods for energy transformation and use are inadvertently contaminating our watersupplies, releasing greenhouse gasses into the atmosphere, emitting compounds that diminish the earth'sprotective blanket of ozone, and depleting the earth's crust of natural resources. As a result, scientists andengineers are increasingly pursuing sustainable technologies so that costs associated with global warmingcan be minimized and adverse impact on living organisms can be prevented. A promising sustainablemethod is to harness energy from the wind via wind turbines. However, the noise generated by wind turbinesproves to be one of the most significant hindrances to the extensive use of wind turbines. In this study,noise generation produced by flow over objects is investigated to characterize the noise generated due toflow-structure interaction and aeroacoustics. As a benchmark, flow over a cylinder has been chosen for thisstudy, with the aim of correlating three main characteristics in noise generation. Hence, the generated soundpressure level, exergy destroyed and the normal flow velocity (∪ ∞ are employed to characterize the systemin order to relate the exergy destruction to the noise generated in the flow. The correlation has the potentialto be used in wind turbine designs to minimize noise pollution due to aerodynamic noise.

Gas turbine engine turbine blade damaging estimate in maintenance

Directory of Open Access Journals (Sweden)

Ель-Хожайрі Хусейн

2004-01-01

Full Text Available  The factors determining character and intensity of corrosive damages of gas turbine blades are analyzed in the article. The classification of detrimental impurities polluting gas turbine airflow duct and injuring blade erosion damages are given. Common features of the method of turbine blade corrosive damage estimation are shown in the article.

Comparison of performances of full-speed turbine and half-speed turbine for nuclear power plants

International Nuclear Information System (INIS)

Wang Hu; Zhang Weihong; Zhang Qiang; Li Shaohua

2010-01-01

The steam turbines of nuclear power plants can be divided into the full-speed turbine and half-speed turbine. Different speed leads to differences in many aspects. Therefore, the rational speed is the key point in the selection of steam turbines. This paper contrasts the economy between the half-speed turbine and full-speed turbine, by calculating the relative internal efficiency of half-speed and full-speed steam turbines with the typical level of 1000 megawatt. At the same time, this paper also calculate the relative speed of high speed water drops in the last stage blade of half-speed turbine and full-speed turbine, to contrast the water erosion between the half-speed turbine and full-speed turbine. The results show that the relative internal efficiency of half-speed turbine is higher than that of the full-speed turbine, and that the security especially the ability of preventing water erosion of half-speed turbine is better than that of the full-speed turbine. (authors)

EGS4 benchmark program

International Nuclear Information System (INIS)

Yasu, Y.; Hirayama, H.; Namito, Y.; Yashiro, S.

1995-01-01

This paper proposes EGS4 Benchmark Suite which consists of three programs called UCSAMPL4, UCSAMPL4I and XYZDOS. This paper also evaluates optimization methods of recent RISC/UNIX systems, such as IBM, HP, DEC, Hitachi and Fujitsu, for the benchmark suite. When particular compiler option and math library were included in the evaluation process, system performed significantly better. Observed performance of some of the RISC/UNIX systems were beyond some so-called Mainframes of IBM, Hitachi or Fujitsu. The computer performance of EGS4 Code System on an HP9000/735 (99MHz) was defined to be the unit of EGS4 Unit. The EGS4 Benchmark Suite also run on various PCs such as Pentiums, i486 and DEC alpha and so forth. The performance of recent fast PCs reaches that of recent RISC/UNIX systems. The benchmark programs have been evaluated with correlation of industry benchmark programs, namely, SPECmark. (author)

A Quasi-Practical Interstellar Rocket Trip

Science.gov (United States)

Edmonds, James D., Jr.

1974-01-01

Mathematically shows that in principle a spaceship could travel eight light years in ten earth years, with the passengers arriving 4.6 years older than when they left earth and having experienced an acceleration induced effective gravity of one g for the entire trip. (MLH)

Service-cycle component-feature specimen TMF testing of steam turbine rotor steels

Energy Technology Data Exchange (ETDEWEB)

Radosavljevic, M.; Holdsworth, S.R. [Eidgenoessische Materialpruefungs- und Forschungsanstalt, Duebendorf (Switzerland); Mazza, E. [Eidgenoessische Materialpruefungs- und Forschungsanstalt, Duebendorf (Switzerland); Eidgenoessische Technische Hochschule (ETH), Zurich (Switzerland); Grossmann, P.; Ripamonti, L. [ALSTOM Power (Switzerland) Ltd., Baden (Switzerland)

2010-07-01

This paper reviews the methodology adopted in a Swiss Research Collaboration to devise a component-feature representative specimen geometry and the TMF cycle parameters necessary to closely simulate arduous steam turbine operating duty. Implementation of these service-like experimental conditions provides a practical indication of the effectiveness of deformation and crack initiation endurance predictions. Comprehensive post test inspection provides evidence to demonstrate the physical realism of the laboratory simulations in terms of the creep-fatigue damage generated during the benchmark tests. Mechanical response results and physical damage observations are presented and their practical implications discussed for the example of a 2%CrMoNiWV rotor service cycle. (orig.)

An integrative conceptual framework for analyzing customer satisfaction with shopping trip experiences in grocery retailing

DEFF Research Database (Denmark)

Esbjerg, Lars; Jensen, Birger Boutrup; Bech-Larsen, Tino

2012-01-01

Grocery retailers aim to satisfy customers, and because grocery shopping trips are frequently recurring, they must do socontinuously. Surprisingly, little research has addressed satisfaction with individual grocery shopping trips. This article therefore develops a conceptual framework for analyzing...... customer satisfaction with individual grocery shopping trip experiences within a overall ‘disconfirmation of expectations model’ of customer satisfaction. The contribution of the framework is twofold. First, by focusing on satisfaction with individual grocery shopping trips, previous research...... on satisfaction in the retailing literature. Second, the framework synthesizes and integrates multiple central concepts from different research streams into a common framework for analyzing shopping trip satisfaction. Propositions are derived regarding the relationships among the different concepts...

Hydraulic turbines and auxiliary equipment

Energy Technology Data Exchange (ETDEWEB)

Luo Gaorong [Organization of the United Nations, Beijing (China). International Centre of Small Hydroelectric Power Plants

1995-07-01

This document presents a general overview on hydraulic turbines and auxiliary equipment, emphasizing the turbine classification, in accordance with the different types of turbines, standard turbine series in China, turbine selection based on the basic data required for the preliminary design, general hill model curves, chart of turbine series and the arrangement of application for hydraulic turbines, hydraulic turbine testing, and speed regulating device.

Gas Turbine Engine Having Fan Rotor Driven by Turbine Exhaust and with a Bypass

Science.gov (United States)

Suciu, Gabriel L. (Inventor); Chandler, Jesse M. (Inventor)

2016-01-01

A gas turbine engine has a core engine incorporating a core engine turbine. A fan rotor is driven by a fan rotor turbine. The fan rotor turbine is in the path of gases downstream from the core engine turbine. A bypass door is moveable from a closed position at which the gases from the core engine turbine pass over the fan rotor turbine, and moveable to a bypass position at which the gases are directed away from the fan rotor turbine. An aircraft is also disclosed.

Benchmarking ENDF/B-VII.0

International Nuclear Information System (INIS)

Marck, Steven C. van der

2006-01-01

The new major release VII.0 of the ENDF/B nuclear data library has been tested extensively using benchmark calculations. These were based upon MCNP-4C3 continuous-energy Monte Carlo neutronics simulations, together with nuclear data processed using the code NJOY. Three types of benchmarks were used, viz., criticality safety benchmarks (fusion) shielding benchmarks, and reference systems for which the effective delayed neutron fraction is reported. For criticality safety, more than 700 benchmarks from the International Handbook of Criticality Safety Benchmark Experiments were used. Benchmarks from all categories were used, ranging from low-enriched uranium, compound fuel, thermal spectrum ones (LEU-COMP-THERM), to mixed uranium-plutonium, metallic fuel, fast spectrum ones (MIX-MET-FAST). For fusion shielding many benchmarks were based on IAEA specifications for the Oktavian experiments (for Al, Co, Cr, Cu, LiF, Mn, Mo, Si, Ti, W, Zr), Fusion Neutronics Source in Japan (for Be, C, N, O, Fe, Pb), and Pulsed Sphere experiments at Lawrence Livermore National Laboratory (for 6 Li, 7 Li, Be, C, N, O, Mg, Al, Ti, Fe, Pb, D 2 O, H 2 O, concrete, polyethylene and teflon). For testing delayed neutron data more than thirty measurements in widely varying systems were used. Among these were measurements in the Tank Critical Assembly (TCA in Japan) and IPEN/MB-01 (Brazil), both with a thermal spectrum, and two cores in Masurca (France) and three cores in the Fast Critical Assembly (FCA, Japan), all with fast spectra. In criticality safety, many benchmarks were chosen from the category with a thermal spectrum, low-enriched uranium, compound fuel (LEU-COMP-THERM), because this is typical of most current-day reactors, and because these benchmarks were previously underpredicted by as much as 0.5% by most nuclear data libraries (such as ENDF/B-VI.8, JEFF-3.0). The calculated results presented here show that this underprediction is no longer there for ENDF/B-VII.0. The average over 257

California commercial building energy benchmarking

Energy Technology Data Exchange (ETDEWEB)

Kinney, Satkartar; Piette, Mary Ann

2003-07-01

Building energy benchmarking is the comparison of whole-building energy use relative to a set of similar buildings. It provides a useful starting point for individual energy audits and for targeting buildings for energy-saving measures in multiple-site audits. Benchmarking is of interest and practical use to a number of groups. Energy service companies and performance contractors communicate energy savings potential with ''typical'' and ''best-practice'' benchmarks while control companies and utilities can provide direct tracking of energy use and combine data from multiple buildings. Benchmarking is also useful in the design stage of a new building or retrofit to determine if a design is relatively efficient. Energy managers and building owners have an ongoing interest in comparing energy performance to others. Large corporations, schools, and government agencies with numerous facilities also use benchmarking methods to compare their buildings to each other. The primary goal of Task 2.1.1 Web-based Benchmarking was the development of a web-based benchmarking tool, dubbed Cal-Arch, for benchmarking energy use in California commercial buildings. While there were several other benchmarking tools available to California consumers prior to the development of Cal-Arch, there were none that were based solely on California data. Most available benchmarking information, including the Energy Star performance rating, were developed using DOE's Commercial Building Energy Consumption Survey (CBECS), which does not provide state-level data. Each database and tool has advantages as well as limitations, such as the number of buildings and the coverage by type, climate regions and end uses. There is considerable commercial interest in benchmarking because it provides an inexpensive method of screening buildings for tune-ups and retrofits. However, private companies who collect and manage consumption data are concerned that the

Benchmarking in Foodservice Operations

National Research Council Canada - National Science Library

Johnson, Bonnie

1998-01-01

The objective of this study was to identify usage of foodservice performance measures, important activities in foodservice benchmarking, and benchmarking attitudes, beliefs, and practices by foodservice directors...

Benchmarking, benchmarks, or best practices? Applying quality improvement principles to decrease surgical turnaround time.

Science.gov (United States)

Mitchell, L

1996-01-01

The processes of benchmarking, benchmark data comparative analysis, and study of best practices are distinctly different. The study of best practices is explained with an example based on the Arthur Andersen & Co. 1992 "Study of Best Practices in Ambulatory Surgery". The results of a national best practices study in ambulatory surgery were used to provide our quality improvement team with the goal of improving the turnaround time between surgical cases. The team used a seven-step quality improvement problem-solving process to improve the surgical turnaround time. The national benchmark for turnaround times between surgical cases in 1992 was 13.5 minutes. The initial turnaround time at St. Joseph's Medical Center was 19.9 minutes. After the team implemented solutions, the time was reduced to an average of 16.3 minutes, an 18% improvement. Cost-benefit analysis showed a potential enhanced revenue of approximately $300,000, or a potential savings of $10,119. Applying quality improvement principles to benchmarking, benchmarks, or best practices can improve process performance. Understanding which form of benchmarking the institution wishes to embark on will help focus a team and use appropriate resources. Communicating with professional organizations that have experience in benchmarking will save time and money and help achieve the desired results.

Round-trip boat on hydrogen

International Nuclear Information System (INIS)

Berends, A.M.; Van der Laag, P.C.

2005-08-01

The results of a feasibility study on a PEM (polymer-electrolyte membrane) fuel cell (FC) driven electric round-trip boat are presented and discussed. The study concerns the specification of a PEMFC system design, including a list of components. Also technical and environmental aspects are dealt with and compared with traditional battery-driven electric boats and diesel-driven boats [nl

Accounting for Laminar Run & Trip Drag in Supersonic Cruise Performance Testing

Science.gov (United States)

Goodsell, Aga M.; Kennelly, Robert A.

1999-01-01

An improved laminar run and trip drag correction methodology for supersonic cruise performance testing was derived. This method required more careful analysis of the flow visualization images which revealed delayed transition particularly on the inboard upper surface, even for the largest trip disks. In addition, a new code was developed to estimate the laminar run correction. Once the data were corrected for laminar run, the correct approach to the analysis of the trip drag became evident. Although the data originally appeared confusing, the corrected data are consistent with previous results. Furthermore, the modified approach, which was described in this presentation, extends prior historical work by taking into account the delayed transition caused by the blunt leading edges.

Nuclear power plant

International Nuclear Information System (INIS)

Igarashi, Yoko; Kato, Naoyoshi.

1982-01-01

Purpose: To decrease the reducing speed of nuclear reactor water level after the water level has reached a turbine trip level to trip the turbine thereby preventing cooling systems or the likes from undesired operation upon separation caused by the reduction of the reactor water level to a low water level before the water level control is switched to the manual control. Constitution: Two feedwater pumps arranged in parallel are operated in usual operation to feedwater to a BWR type reactor. If a trouble should occur in a feedwater controller to increase the feedwater rate and the reactor water level, one of the feedwater pumps is tripped by a signal from a feedwater pump trip device. Then, when the trip level is reached again the remaining pump is tripped. In this way, the sudden decrease in the feedwater rate and the reactor water level can be prevented. (Yoshino, Y.)

Personal and environmental characteristics associated with choice of active transport modes versus car use for different trip purposes of trips up to 7.5 kilometers in The Netherlands.

Directory of Open Access Journals (Sweden)

Eline Scheepers

Full Text Available INTRODUCTION: This explorative study examines personal and neighbourhood characteristics associated with short-distance trips made by car, bicycle or walking in order to identify target groups for future interventions. METHODS: Data were derived from 'Mobility Research Netherlands (2004-2009; MON', a dataset including information regarding trips made by household members (n = ±53,000 respondents annually. Using postal codes of household addresses, MON data were enriched with data on neighbourhood typologies. Multilevel logistic modelling was used to calculate odds ratio (OR of active transport versus car use associated with four different trip purposes (shopping (reference, commuting, taking or bringing persons or sports. A total of 277,292 short distance trips made by 102,885 persons were included in analyses. RESULTS: Compared to women shopping, women less often take active transport to sports clubs (OR = 0.88 and men less often take active transport for shopping (OR = 0.92, or for bringing or taking persons (OR = 0.76. Those aged 25-34 years (OR = 0.83 and 35-44 years (OR = 0.96 were more likely to use active transport for taking or bringing persons than persons belonging to the other age groups (relative to trips made for shopping by those 65 years or over. A higher use of active transport modes by persons with an university or college degree was found and particularly persons living in urban-centre neighbourhoods were likely to use active transport modes. CONCLUSION: IN DEVELOPING POLICIES PROMOTING A MODE SHIFT SPECIAL ATTENTION SHOULD BE GIVEN TO THE FOLLOWING GROUPS: a men making short distance trips for taking or bringing persons, b women making short distance trips to sport facilities, c persons belonging to the age groups of 25-44 years of age, d Persons with a primary school or lower general secondary education degree and persons with a high school or secondary school degree and e persons living in rural or

Control rod trip failures; Salem 1, the cause, response, and potential fixes

International Nuclear Information System (INIS)

Hall, R.E.; Boccio, J.L.; Luckas, W.J.

1984-01-01

This chapter presents a systems and reliability analysis of recent nuclear reactor control rod failure-to-trip (or scram) events that have been experienced in the US commercial nuclear industry. The operational factors of hardware, procedures, and human error are considered in the analysis of transients without scram. The 1980 Browns Ferry 3 scram system failure is analyzed to contrast the two 1983 Salem 1 events. The details of the Salem control rod failure to trip are investigated and used to calculate the reactor protection system unavailabilities. The internal reactor trip breaker logic is reviewed as related to the Westinghouse DB-50 breaker application. The impact of test and maintenance on system challenges is discussed. It is concluded that although the failure to trip or scram represents a single class of initiators, the actual events of each transient are operationally unique and require individual human responses

Benchmarking i den offentlige sektor

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Dietrichson, Lars; Sandalgaard, Niels

2008-01-01

I artiklen vil vi kort diskutere behovet for benchmarking i fraværet af traditionelle markedsmekanismer. Herefter vil vi nærmere redegøre for, hvad benchmarking er med udgangspunkt i fire forskellige anvendelser af benchmarking. Regulering af forsyningsvirksomheder vil blive behandlet, hvorefter...

Regional Competitive Intelligence: Benchmarking and Policymaking

OpenAIRE

Huggins , Robert

2010-01-01

Benchmarking exercises have become increasingly popular within the sphere of regional policymaking in recent years. The aim of this paper is to analyse the concept of regional benchmarking and its links with regional policymaking processes. It develops a typology of regional benchmarking exercises and regional benchmarkers, and critically reviews the literature, both academic and policy oriented. It is argued that critics who suggest regional benchmarking is a flawed concept and technique fai...

A Land-use Approach for Capturing Future Trip Generating Poles

Directory of Open Access Journals (Sweden)

Iraklis Stamos

2015-12-01

Full Text Available Changes in the usage of a particular urban or regional area have immediate effects on transportation, such as the development of a new multimodal terminal within a city, or the creation of a business park in its outskirts. Thus far, this correlation has been under-researched at a national level in Greece. As a result, its effects on trip generation and passenger flows has been underestimated at the planning level, leading to the implementation of projects that are neither viable nor sustainable. This paper proposes that land use changes ought to be considered in tandem with transport-related changes at the planning stage. To this effect, we present a three-step methodology for an integrated approach to capturing future trip generation: the identification of future trip-generating poles within the study area; the development of scenarios related to the probability of these changes occurring and their potential magnitude; an estimation of future trends in passenger flows. The methodology is applied to the Metropolitan area of Thessaloniki, Greece. Using data obtained from development plans, national statistical services and research projects’ and studies’ findings, we estimate future trip-generation subsequent to land use change. Data is processed and evaluated by a local experts’ group, representing various key-disciplines of the area’s planning stakeholders.

Anything Can Happen out There: A Holistic Approach to Field Trips

Science.gov (United States)

Plutino, Alessia

2016-01-01

This paper looks back at an academic-led language field trip project, now in its third year, involving ab-initio students of Italian at the University of Southampton. It considers the role of academic-led field trips in Modern Languages (ML) and it explores the underlying pedagogical approaches that were adopted to enhance students' engagement,…

Flow protection trip limits operational charge-discharge facility -- C Reactor

Energy Technology Data Exchange (ETDEWEB)

Van Wormer, F.W.

1958-09-19

Because of wide variations in the venturi throat pressure, well beyond the panellit gage trip range, that occur during the sequence of operational charge-discharge, the panellit gage cannot be included in the scram safety circuit during the period of time that charge- discharge operations are being performed. In its stead, the function of the panellit gage is replaced in an overlapping manner by a tube inlet pressure monitor that is equipped with high and low pressure trip mechanisms that may be included in the scram safety circuit during the time that the panellit gage must be by-passed. The tube inlet pressure monitor is then used to provide the protection from unstable flow that is normally obtained with the panellit gage. This memorandum describes the manner in which the tube inlet pressure monitor trip points are to be determined and used.

Design and Optimization of an Austenitic TRIP Steel for Blast and Fragment Protection

Science.gov (United States)

Feinberg, Zechariah Daniel

In light of the pervasive nature of terrorist attacks, there is a pressing need for the design and optimization of next generation materials for blast and fragment protection applications. Sadhukhan used computational tools and a systems-based approach to design TRIP-120---a fully austenitic transformation-induced plasticity (TRIP) steel. Current work more completely evaluates the mechanical properties of the prototype, optimizes the processing for high performance in tension and shear, and builds models for more predictive power of the mechanical behavior and austenite stability. Under quasi-static and dynamic tension and shear, the design exhibits high strength and high uniform ductility as a result of a strain hardening effect that arises with martensitic transformation. Significantly more martensitic transformation occurred under quasi-static loading conditions (69% in tension and 52% in shear) compared to dynamic loading conditions (13% tension and 5% in shear). Nonetheless, significant transformation occurs at high-strain rates which increases strain hardening, delays the onset of necking instability, and increases total energy absorption under adiabatic conditions. Although TRIP-120 effectively utilizes a TRIP effect to delay necking instability, a common trend of abrupt failure with limited fracture ductility was observed in tension and shear at all strain rates. Further characterization of the structure of TRIP-120 showed that an undesired grain boundary cellular reaction (η phase formation) consumed the fine dispersion of the metastable gamma' phase and limited the fracture ductility. A warm working procedure was added to the processing of TRIP-120 in order to eliminate the grain boundary cellular reaction from the structure. By eliminating η formation at the grain boundaries, warm-worked TRIP-120 exhibits a drastic improvement in the mechanical properties in tension and shear. In quasi-static tension, the optimized warm-worked TRIP-120 with an Mssigma

Short-term service trips and the interprofessional team: a perspective from Honduras.

Science.gov (United States)

VanderWielen, Lynn M; Halder, Gabriela E; Enurah, Alexander S; Pearson, Catherine; Stevens, Michael P; Crossman, Steven H

2015-03-01

Short-term service trips from the USA annually spend over $250 million dollars to provide healthcare to individuals in developing nations. These trips often uniquely define goals as related to changes in the host population and overlook the valuable benefits potentially incurred by the trip volunteers. The Honduras Outreach Medical Brigada Relief Effort utilizes an interprofessional team approach to develop the dual goals of improving health and quality of life in host communities and improving interprofessional teamwork values and skills among participants. This article outlines details of this program, describes on-going evaluation work and discusses the interprofessional implications from this project.

Benchmarking Using Basic DBMS Operations

Science.gov (United States)

Crolotte, Alain; Ghazal, Ahmad

The TPC-H benchmark proved to be successful in the decision support area. Many commercial database vendors and their related hardware vendors used these benchmarks to show the superiority and competitive edge of their products. However, over time, the TPC-H became less representative of industry trends as vendors keep tuning their database to this benchmark-specific workload. In this paper, we present XMarq, a simple benchmark framework that can be used to compare various software/hardware combinations. Our benchmark model is currently composed of 25 queries that measure the performance of basic operations such as scans, aggregations, joins and index access. This benchmark model is based on the TPC-H data model due to its maturity and well-understood data generation capability. We also propose metrics to evaluate single-system performance and compare two systems. Finally we illustrate the effectiveness of this model by showing experimental results comparing two systems under different conditions.

High Energy Physics (HEP) benchmark program

International Nuclear Information System (INIS)

Yasu, Yoshiji; Ichii, Shingo; Yashiro, Shigeo; Hirayama, Hideo; Kokufuda, Akihiro; Suzuki, Eishin.

1993-01-01

High Energy Physics (HEP) benchmark programs are indispensable tools to select suitable computer for HEP application system. Industry standard benchmark programs can not be used for this kind of particular selection. The CERN and the SSC benchmark suite are famous HEP benchmark programs for this purpose. The CERN suite includes event reconstruction and event generator programs, while the SSC one includes event generators. In this paper, we found that the results from these two suites are not consistent. And, the result from the industry benchmark does not agree with either of these two. Besides, we describe comparison of benchmark results using EGS4 Monte Carlo simulation program with ones from two HEP benchmark suites. Then, we found that the result from EGS4 in not consistent with the two ones. The industry standard of SPECmark values on various computer systems are not consistent with the EGS4 results either. Because of these inconsistencies, we point out the necessity of a standardization of HEP benchmark suites. Also, EGS4 benchmark suite should be developed for users of applications such as medical science, nuclear power plant, nuclear physics and high energy physics. (author)

Trip-Induced Transition Measurements in a Hypersonic Boundary Layer Using Molecular Tagging Velocimetry

Science.gov (United States)

Bathel, Brett F.; Danehy, Paul M.; Jones, Stephen B.; Johansen, Craig T.; Goyne, Christopher P.

2013-01-01

Measurements of mean streamwise velocity, fluctuating streamwise velocity, and instantaneous streamwise velocity profiles in a hypersonic boundary layer were obtained over a 10-degree half-angle wedge model. A laser-induced fluorescence-based molecular tagging velocimetry technique was used to make the measurements. The nominal edge Mach number was 4.2. Velocity profiles were measured both in an untripped boundary layer and in the wake of a 4-mm diameter cylindrical tripping element centered 75.4 mm downstream of the sharp leading edge. Three different trip heights were investigated: k = 0.53 mm, k = 1.0 mm and k = 2.0 mm. The laminar boundary layer thickness at the position of the measurements was approximately 1 mm, though the exact thickness was dependent on Reynolds number and wall temperature. All of the measurements were made starting from a streamwise location approximately 18 mm downstream of the tripping element. This measurement region continued approximately 30 mm in the streamwise direction. Additionally, measurements were made at several spanwise locations. An analysis of flow features show how the magnitude, spatial location, and spatial growth of streamwise velocity instabilities are affected by parameters such as the ratio of trip height to boundary layer thickness and roughness Reynolds number. The fluctuating component of streamwise velocity measured along the centerline of the model increased from approximately 75 m/s with no trip to +/-225 m/s with a 0.53-mm trip, and to +/-240 m/s with a 1-mm trip, while holding the freestream Reynolds number constant. These measurements were performed in the 31-inch Mach 10 Air Tunnel at the NASA Langley Research Center.

Aerodynamics of Wind Turbines

DEFF Research Database (Denmark)

Hansen, Martin Otto Laver

Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its second edition, it has been entirely updated and substantially extended to reflect advances in technology, research into rotor aerodynamics and the structural...... response of the wind turbine structure. Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element...... Momentum method is also covered, as are eigenmodes and the dynamic behavior of a turbine. The new material includes a description of the effects of the dynamics and how this can be modeled in an aeroelastic code, which is widely used in the design and verification of modern wind turbines. Further...

Aerodynamics of wind turbines

DEFF Research Database (Denmark)

Hansen, Martin Otto Laver

Aerodynamics of Wind Turbines is the established essential text for the fundamental solutions to efficient wind turbine design. Now in its third edition, it has been substantially updated with respect to structural dynamics and control. The new control chapter now includes details on how to design...... Turbines (VAWT). Topics covered include increasing mass flow through the turbine, performance at low and high wind speeds, assessment of the extreme conditions under which the turbine will perform and the theory for calculating the lifetime of the turbine. The classical Blade Element Momentum method...... is also covered, as are eigenmodes and the dynamic behaviour of a turbine. The book describes the effects of the dynamics and how this can be modelled in an aeroelastic code, which is widely used in the design and verification of modern wind turbines. Furthermore, it examines how to calculate...

Benchmarking Tool Kit.

Science.gov (United States)

Canadian Health Libraries Association.

Nine Canadian health libraries participated in a pilot test of the Benchmarking Tool Kit between January and April, 1998. Although the Tool Kit was designed specifically for health libraries, the content and approach are useful to other types of libraries as well. Used to its full potential, benchmarking can provide a common measuring stick to…

Hydrogen production using the waste heat of Benchmark pressurized Molten carbonate fuel cell system via combination of organic Rankine cycle and proton exchange membrane (PEM) electrolysis

International Nuclear Information System (INIS)

Nami, Hossein; Akrami, Ehsan; Ranjbar, Faramarz

2017-01-01

Highlights: • Waste heat of the Benchmark system recovered using an ORC. • An integrated system is proposed to produce power and hydrogen. • The effects of some decision parameters on the produced hydrogen have investigated. - Abstract: Energy and exergy analyses are carried out for hydrogen production via combination of Benchmark system and organic Rankine cycle (ORC) coupled with a proton exchange membrane electrolyzer. A parametric study is reported and effects of such organic Rankine cycle significant variables as evaporator temperature, pinch point temperature difference in the evaporator and degree of superheat at the ORC turbine inlet on the rate of produced hydrogen, sustainability index, overall exergy efficiency and organic Rankine cycle net produced power are investigated. It is observed that the rate of produced hydrogen and overall exergy efficiency of the proposed combined system take the maximum value to change in the evaporator temperature. Also, it is revealed that increasing the pinch point temperature difference in the evaporator decreases the rate of produced hydrogen and the overall exergy efficiency of the system. Furthermore, the effects on the rate of produced hydrogen and the overall exergy efficiency of the degree of superheat at the ORC turbine inlet are the same as the effect of pinch point temperature difference.

Remaining life assessment of a high pressure turbine rotor

International Nuclear Information System (INIS)

Nguyen, Ninh; Little, Alfie

2012-01-01

This paper describes finite element and fracture mechanics based modelling work that provides a useful tool for evaluation of the remaining life of a high pressure (HP) steam turbine rotor that had experienced thermal fatigue cracking. An axis-symmetrical model of a HP rotor was constructed. Steam temperature, pressure and rotor speed data from start ups and shut downs were used for the thermal and stress analysis. Operating history and inspection records were used to benchmark the damage experienced by the rotor. Fracture mechanics crack growth analysis was carried out to evaluate the remaining life of the rotor under themal cyclic loading conditions. The work confirmed that the fracture mechanics approach in conjunction with finite element modelling provides a useful tool for assessing the remaining life of high temperature components in power plants.

Real Students and Virtual Field Trips

Science.gov (United States)

de Paor, D. G.; Whitmeyer, S. J.; Bailey, J. E.; Schott, R. C.; Treves, R.; Scientific Team Of Www. Digitalplanet. Org

2010-12-01

Field trips have always been one of the major attractions of geoscience education, distinguishing courses in geology, geography, oceanography, etc., from laboratory-bound sciences such as nuclear physics or biochemistry. However, traditional field trips have been limited to regions with educationally useful exposures and to student populations with the necessary free time and financial resources. Two-year or commuter colleges serving worker-students cannot realistically insist on completion of field assignments and even well-endowed universities cannot take students to more than a handful of the best available field localities. Many instructors have attempted to bring the field into the classroom with the aid of technology. So-called Virtual Field Trips (VFTs) cannot replace the real experience for those that experience it but they are much better than nothing at all. We have been working to create transformative improvements in VFTs using four concepts: (i) self-drive virtual vehicles that students use to navigate the virtual globe under their own control; (ii) GigaPan outcrops that reveal successively more details views of key locations; (iii) virtual specimens scanned from real rocks, minerals, and fossils; and (iv) embedded assessment via logging of student actions. Students are represented by avatars of their own choosing and travel either together in a virtual field vehicle, or separately. When they approach virtual outcrops, virtual specimens become collectable and can be examined using Javascript controls that change magnification and orientation. These instructional resources are being made available via a new server under the domain name www.DigitalPlanet.org. The server will log student progress and provide immediate feedback. We aim to disseminate these resources widely and welcome feedback from instructors and students.

Analysis of turbine-grid interaction of grid-connected wind turbine using HHT

Science.gov (United States)

Chen, A.; Wu, W.; Miao, J.; Xie, D.

2018-05-01

This paper processes the output power of the grid-connected wind turbine with the denoising and extracting method based on Hilbert Huang transform (HHT) to discuss the turbine-grid interaction. At first, the detailed Empirical Mode Decomposition (EMD) and the Hilbert Transform (HT) are introduced. Then, on the premise of decomposing the output power of the grid-connected wind turbine into a series of Intrinsic Mode Functions (IMFs), energy ratio and power volatility are calculated to detect the unessential components. Meanwhile, combined with vibration function of turbine-grid interaction, data fitting of instantaneous amplitude and phase of each IMF is implemented to extract characteristic parameters of different interactions. Finally, utilizing measured data of actual parallel-operated wind turbines in China, this work accurately obtains the characteristic parameters of turbine-grid interaction of grid-connected wind turbine.

The study on the threshold strain of microvoid formation in TRIP steels during tensile deformation

International Nuclear Information System (INIS)

Wang Wurong; Guo Bimeng; Ji Yurong; He Changwei; Wei Xicheng

2012-01-01

Highlights: ► The tensile mechanical behaviors of TRIP steels were studied under high rate deformation conditions. ► The threshold strain of microvoid formation was examined quantitatively. ► The effects of retained austenite of TRIP on suppressing microvoid formed during tensile process have been discussed. - Abstract: Transformation Induced Plasticity (TRIP) steels exhibit a better combination of strength and ductility properties than conventional high strength low alloy (HSLA) steels, and therefore receive considerable attention in the automotive industry. In this work, the tensile mechanical behaviors of TRIP-aided steels were studied under the condition of the quasi-static and high deformed rates. The deformed specimens were observed by scanning electron microscope (SEM) along the tensile axis. The threshold strain of microvoid formation was examined quantitatively according to the evolution of deformation. The results showed that: the yield and tensile strengths of TRIP steels increase with the strain rate, whereas their elongations decrease. However, the threshold strain for TRIP steels at high strain rate is larger than that at low strain rate. Comparing with the deformed microstructure and microvoids formed in the necking zone of dual phase (DP) steel, the progressive deformation-induced transformation of retained austenite in TRIP steels remarkably increases the threshold strain of microvoid formation and furthermore postpones its growth and coalescence.

CNMI, American Samoa, and Guam Small Boat Fishery Trip Expenditure (2009 to present)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This is a time-series dataset of trip expenditure data including actual fishing trip expenses, input usage, and input prices, for boat-based reef fish, bottomfish,...

A Global Vision over Benchmarking Process: Benchmarking Based Enterprises

OpenAIRE

Sitnikov, Catalina; Giurca Vasilescu, Laura

2008-01-01

Benchmarking uses the knowledge and the experience of others to improve the enterprise. Starting from the analysis of the performance and underlying the strengths and weaknesses of the enterprise it should be assessed what must be done in order to improve its activity. Using benchmarking techniques, an enterprise looks at how processes in the value chain are performed. The approach based on the vision “from the whole towards the parts” (a fragmented image of the enterprise’s value chain) redu...

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E [Teollisuuden Voima Oy, Olkiluoto (Finland)

1999-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

Turbine maintenance and modernization

Energy Technology Data Exchange (ETDEWEB)

Unga, E. [Teollisuuden Voima Oy, Olkiluoto (Finland)

1998-12-31

The disturbance-free operation of the turbine plant plays an important role in reaching good production results. In the turbine maintenance of the Olkiluoto nuclear power plant the lifetime and efficiency of turbine components and the lifetime costs are taken into account in determining the turbine maintenance and modernization/improvement program. The turbine maintenance program and improvement/modernization measures taken in the plant units are described in this presentation. (orig.)

THE TRIPS AGREEMENT, INTERNATIONAL TECHNOLOGY TRANSFER AND DEVELOPMENT: SOME LESSONS FROM STRENGTHENING IPR PROTECTION

Directory of Open Access Journals (Sweden)

M. Shugurov

2016-01-01

Full Text Available The article focuses on the impact of the TRIPS Agreement provisions on further development of international technology transfer (ITT mainly to developing countries. The authors review the critical specificity of ITT connected with the adoption of TRIPS. Much attention is paid to an analysis of what is most discussed among international experts in the area of the issues on the dual results of stronger intellectual property rights (IPRs concerning various groups of developing countries. Their study also examines a number of problems with implementation of the TRIPS provisions, conducive to ITT, in the context of the TRIPS-plus era as a new stage in strengthening IPR protection. Bearing in mind the fragmentation of the international regime of IPR protection because of the adoption of numerous regional free trade agreements, the authors outline the possible position of advanced developing and least developed countries with respect to using TRIPS potentials for development of ITT under reasonable and just terms, with the aim of overall prosperity.

Trip generation data collection in urban areas.

Science.gov (United States)

2014-09-01

There is currently limited data on urban, multimodal trip generation at the individual site level. This lack of : data limits the ability of transportation agencies to assess development impacts on the transportation system : in urban and multimodal ...

Pedagogical Souvenirs: An Art Educator's Reflections on Field Trips as Professional Development

Science.gov (United States)

Kushins, Jodi

2015-01-01

This essay explores the nature and importance of field trips as sites for artistic development, intellectual fulfillment, and pedagogical inspiration. The author weaves personal reflections from a professional field trip and experience teaching art education online with creative and pedagogical references to make a case for experiential learning…

Argonne Code Center: Benchmark problem book.

Energy Technology Data Exchange (ETDEWEB)

None, None

1977-06-01

This book is an outgrowth of activities of the Computational Benchmark Problems Committee of the Mathematics and Computation Division of the American Nuclear Society. This is the second supplement of the original benchmark book which was first published in February, 1968 and contained computational benchmark problems in four different areas. Supplement No. 1, which was published in December, 1972, contained corrections to the original benchmark book plus additional problems in three new areas. The current supplement. Supplement No. 2, contains problems in eight additional new areas. The objectives of computational benchmark work and the procedures used by the committee in pursuing the objectives are outlined in the original edition of the benchmark book (ANL-7416, February, 1968). The members of the committee who have made contributions to Supplement No. 2 are listed below followed by the contributors to the earlier editions of the benchmark book.

Passive control of cavitating flow around an axisymmetric projectile by using a trip bar

Directory of Open Access Journals (Sweden)

Jian Huang

2017-07-01

Full Text Available Quasi-periodical evolutions such as shedding and collapsing of unsteady cloud cavitating flow, induce strong pressure fluctuations, what may deteriorate maneuvering stability and corrode surfaces of underwater vehicles. This paper analyzed effects on cavitation stability of a trip bar arranged on high-speed underwater projectile. Small scale water tank experiment and large eddy simulation using the open source software OpenFOAM were used, and the results agree well with each other. Results also indicate that trip bar can obstruct downstream re-entrant jet and pressure wave propagation caused by collapse, resulting in a relatively stable sheet cavity between trip bar and shoulder of projectiles. Keywords: Unsteady cavitating flow, Trip bar, Re-entrant jet, Passive flow control

Factors affecting trip generation of motorcyclist for the purpose of non-mandatory activities

Science.gov (United States)

Anggraini, Renni; Sugiarto, Sugiarto; Pramanda, Heru

2017-11-01

The inadequate facilities and limited access to public transport reflect many people using private vehicles, in particular, motorcycle. The motorcycle is most widely used in Indonesia, recently, including Aceh Province. As a result, the number of motorcycle ownership is increasing significantly. The increasing number of motorcycles leads to complex traffic problems. Several factors tend to affect the trip generation of the motorcyclist, i.e., the social demographics of individuals and families, accessibility, etc. This study aims to analyze the characteristics of motorcyclists for non-mandatory activities, i.e. activities other than to work and school. It also aims to determine the dominant factors that affect their trips through trip generation models. The required data consist of primary data and secondary data. Primary data consists of a home interview survey that collects individual's daily trips. It is conducted by distributing the questionnaires to 400 families residing in Lhokseumawe City. Modeling the trip generation of the motorcyclist is done by multiple linear regression analysis. Parameters calibration uses OLS (Ordinary Least Square) method. The results showed that the dominant variables that affect the trip generation of motorcyclist for non-mandatory activities are license ownership, housewife, school-age children, middle-income household, and lower education level. It can be concluded that some factors affecting trip generation to non-work activities were female motorcyclists from the middle-income household with lower education level. As their status is mostly as the housewife, escorting children to non-school activities seems to the mother's task, instead of the father. It is clear that, most female ride motorcycle for doing household tasks. However, it should be noted that the use of the motorcycle in long-term does not suit for sustainable transportation.

Benchmarks for GADRAS performance validation

International Nuclear Information System (INIS)

Mattingly, John K.; Mitchell, Dean James; Rhykerd, Charles L. Jr.

2009-01-01

The performance of the Gamma Detector Response and Analysis Software (GADRAS) was validated by comparing GADRAS model results to experimental measurements for a series of benchmark sources. Sources for the benchmark include a plutonium metal sphere, bare and shielded in polyethylene, plutonium oxide in cans, a highly enriched uranium sphere, bare and shielded in polyethylene, a depleted uranium shell and spheres, and a natural uranium sphere. The benchmark experimental data were previously acquired and consist of careful collection of background and calibration source spectra along with the source spectra. The calibration data were fit with GADRAS to determine response functions for the detector in each experiment. A one-dimensional model (pie chart) was constructed for each source based on the dimensions of the benchmark source. The GADRAS code made a forward calculation from each model to predict the radiation spectrum for the detector used in the benchmark experiment. The comparisons between the GADRAS calculation and the experimental measurements are excellent, validating that GADRAS can correctly predict the radiation spectra for these well-defined benchmark sources.

Benchmarking in Czech Higher Education

Directory of Open Access Journals (Sweden)

Plaček Michal

2015-12-01

Full Text Available The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Based on an analysis of the current situation and existing needs in the Czech Republic, as well as on a comparison with international experience, recommendations for public policy are made, which lie in the design of a model of a collaborative benchmarking for Czech economics and management in higher-education programs. Because the fully complex model cannot be implemented immediately – which is also confirmed by structured interviews with academics who have practical experience with benchmarking –, the final model is designed as a multi-stage model. This approach helps eliminate major barriers to the implementation of benchmarking.

Survey on how fluctuating petrol prices are affecting Malaysian large city dwellers in changing their trip patterns

Science.gov (United States)

Rohani, M. M.; Pahazri, N.

2018-04-01

Rising fuel prices shocks have a significant impact on the way of life of most Malaysians. Due to the rising of oil prices, the costs of travel for private vehicle users are therefore increasing. The study was conducted based on the objective of studying the impact of rising fuel prices on three types of trip patterns of Malaysians who are living in the city areas. The three types of trip patterns are, workplaces trip, leisure trip and personal purposes trip during the weekdays. This study was conducted by distributing questionnaires to respondents of private vehicle users in selected city such as Johor Bahru, Kuala Lumpur, Putrajaya, Melaka, Perak, Selangor and Kelantan. This study, found that the trip patterns of those who were using their own vehicles had changed after the rising of fuel prices. The changes showed that many private vehicle users were taking steps to save money on petrol by adjusting their trips.

The influence of TripAdvisor portal on hotel bussines in Serbia

Directory of Open Access Journals (Sweden)

Čačić Krunoslav

2013-01-01

Full Text Available Numerous researches have shown the existence of influence of specialized Web 2.0 portals on hotel business. One of most famous portals of that kind is TripAdvisor. The goal of this work is to determine the degree and mode of representation of hotels in Serbia on TripAdvisor portal. The results of the conducted research show that in past years the number of hotels from Serbia represented on this portal has increased significantly. At the end of 2012 there have been registered 3.288 comments which evaluated the service quality of 165 hotels from Serbia. The average vote, on five-degree scale, calculated at the level of all represented hotels at the end of 2012 was 3,92. Considering that Belgrade represents the primarily business, administrative and touristic center of Serbia, on the Belgrade's hotels specimen there has been analyzed the connection between business performances of hotels expressed through indicator TREVPAR and their image on TripAdvisor expressed through average vote determined based on user's comments, as well as in relation with TripAdvisor Popularity Index (TPI. The results show the high degree of correlation between analyzed features on the specimen of Belgrade's hotels, in range of hotels of second (4* and third category (3*. Having in mind the results of conducted research it is obvious that the hotels managers from Serbia should adopt and implement the corresponding procedures of monitoring and adequate reactions on contents on TripAdvisor, considering their influence on behavior of modern consumer in hotels.

Data driven fault detection and isolation: a wind turbine scenario

Directory of Open Access Journals (Sweden)

Rubén Francisco Manrique Piramanrique

2015-04-01

Full Text Available One of the greatest drawbacks in wind energy generation is the high maintenance cost associated to mechanical faults. This problem becomes more evident in utility scale wind turbines, where the increased size and nominal capacity comes with additional problems associated with structural vibrations and aeroelastic effects in the blades. Due to the increased operation capability, it is imperative to detect system degradation and faults in an efficient manner, maintaining system integrity, reliability and reducing operation costs. This paper presents a comprehensive comparison of four different Fault Detection and Isolation (FDI filters based on “Data Driven” (DD techniques. In order to enhance FDI performance, a multi-level strategy is used where:  the first level detects the occurrence of any given fault (detection, while  the second identifies the source of the fault (isolation. Four different DD classification techniques (namely Support Vector Machines, Artificial Neural Networks, K Nearest Neighbors and Gaussian Mixture Models were studied and compared for each of the proposed classification levels. The best strategy at each level could be selected to build the final data driven FDI system. The performance of the proposed scheme is evaluated on a benchmark model of a commercial wind turbine. 

The Educational Value of Field Trips

Science.gov (United States)

Greene, Jay P.; Kisida, Brian; Bowen, Daniel H.

2014-01-01

The school field trip has a long history in American public education. For decades, students have piled into yellow buses to visit a variety of cultural institutions, including art, natural history, and science museums, as well as theaters, zoos, and historical sites. Schools gladly endured the expense and disruption of providing field trips…

ANN-Benchmarks: A Benchmarking Tool for Approximate Nearest Neighbor Algorithms

DEFF Research Database (Denmark)

Aumüller, Martin; Bernhardsson, Erik; Faithfull, Alexander

2017-01-01

This paper describes ANN-Benchmarks, a tool for evaluating the performance of in-memory approximate nearest neighbor algorithms. It provides a standard interface for measuring the performance and quality achieved by nearest neighbor algorithms on different standard data sets. It supports several...... visualise these as images, Open image in new window plots, and websites with interactive plots. ANN-Benchmarks aims to provide a constantly updated overview of the current state of the art of k-NN algorithms. In the short term, this overview allows users to choose the correct k-NN algorithm and parameters...... for their similarity search task; in the longer term, algorithm designers will be able to use this overview to test and refine automatic parameter tuning. The paper gives an overview of the system, evaluates the results of the benchmark, and points out directions for future work. Interestingly, very different...

Benchmarking Swiss electricity grids

International Nuclear Information System (INIS)

Walti, N.O.; Weber, Ch.

2001-01-01

This extensive article describes a pilot benchmarking project initiated by the Swiss Association of Electricity Enterprises that assessed 37 Swiss utilities. The data collected from these utilities on a voluntary basis included data on technical infrastructure, investments and operating costs. These various factors are listed and discussed in detail. The assessment methods and rating mechanisms that provided the benchmarks are discussed and the results of the pilot study are presented that are to form the basis of benchmarking procedures for the grid regulation authorities under the planned Switzerland's electricity market law. Examples of the practical use of the benchmarking methods are given and cost-efficiency questions still open in the area of investment and operating costs are listed. Prefaces by the Swiss Association of Electricity Enterprises and the Swiss Federal Office of Energy complete the article

Forest Field Trips among High School Science Teachers in the Southern Piedmont

Science.gov (United States)

McCabe, Shannon M.; Munsell, John F.; Seiler, John R.

2014-01-01

Students benefit in many ways by taking field trips to forests. Improved academic performance, increased participation in outdoor recreation, and a better grasp of natural resources management are some of the advantages. However, trips are not easy for teachers to organize and lead. Declining budgets, on-campus schedules, and standards of learning…

Microstructural Development during Welding of TRIP steels

NARCIS (Netherlands)

Amirthalingam, M.

2010-01-01

The Advanced High Strength Steels (AHSS) are promising solutions for the production of lighter automobiles which reduce fuel consumption and increase passenger safety by improving crash-worthiness. Transformation Induced Plasticity Steel (TRIP) are part of the advanced high strength steels which

Gas turbines and operation of gas turbines 2011; Gasturbinen und Gasturbinenbetrieb 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Within the VGB Conference at 11th and 12th May, 2011 in Offenbach/Main (Federal Republic of Germany), the following lectures were held: (1) The future of high temperature gas turbines in power plants (Konrad Vogeler); (2) Development of reliable thermal barrier coatings for high-loaded turbine and combustor parts (Hans-Peter Bossmann); (3) CCPP Irsching 4 with gas turbine SGT5-8000H, on the way to 60 % CC efficiency (Willibald Fischer); (4) First test results of MAN's new 6 MW gas turbine (Markus Beukenberg); (5) Design characteristics and key thermodynamic parameters of the recuperated 4 MW solar turbines Mercury 50 gas turbines: - Economics and environmental feasibility, - operating experience in combined cycle applications with recuperation (Ulrich Stang); (6) Medium size gas turbines - OEM concept for continued reduction of life cycle costs (Vladimir Navrotsky); (7) Fracture mechanical analysis on fatigue failures of gas turbine components: - Root cause analysis - fracture mechanics - stress corrosion cracking - examples of failure analysis (Peter Verstraete); (8) The effectiveness of blade superalloy reheat treatment (Michael Wood); (9) An innovative combustion technology for high efficient gas turbines (Christian Oliver Paschereit); (10) Damping of thermo-acoustic vibrations in gas turbine combustion chambers (Sermed Sadig); (11) Alstom GT13E2 combustor upgrade for Vattenfalls Berlin Mitte combined heat and power plant (Klaus Doebbeling); (12) Optimisation of air inlet filtration for dust, rain and humidity (Heiko Manstein); (13) Life cycle cost reduction through high efficiency membrane based air intake filters (Helmut Krah); (14) Status and impact of national, European and international standardization on GT plants; GT standardizing status quo? (Gerd Weber); (15) Technical and thermodynamic aspects of compresssed air energy storage (Peter Radgen); (16) Requirements on the gas turbine in the course of time - intelligent OEM-concepts to ensure reliable

Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels

International Nuclear Information System (INIS)

Bhargava, M; Asim, T; Sushil, M; Shanta, C

2015-01-01

Automotive industry is currently focusing on using advanced high strength steels (AHSS) due to its high strength and formability for closure applications. Transformation Induced Plasticity (TRIP) steel is promising material for this application among other AHSS. The present work is focused on the microstructure development during deformation of TRIP steel sheets. To mimic complex strain path condition during forming of automotive body, Limit Dome Height (LDH) tests were conducted and samples were deformed in servo hydraulic press to find the different strain path. FEM Simulations were done to predict different strain path diagrams and compared with experimental results. There is a significant difference between experimental and simulation results as the existing material models are not applicable for TRIP steels. Micro texture studies were performed on the samples using EBSD and X-RD techniques. It was observed that austenite is transformed to martensite and texture developed during deformation had strong impact on limit strain and strain path. (paper)

Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels

Science.gov (United States)

Bhargava, M.; Shanta, C.; Asim, T.; Sushil, M.

2015-04-01

Automotive industry is currently focusing on using advanced high strength steels (AHSS) due to its high strength and formability for closure applications. Transformation Induced Plasticity (TRIP) steel is promising material for this application among other AHSS. The present work is focused on the microstructure development during deformation of TRIP steel sheets. To mimic complex strain path condition during forming of automotive body, Limit Dome Height (LDH) tests were conducted and samples were deformed in servo hydraulic press to find the different strain path. FEM Simulations were done to predict different strain path diagrams and compared with experimental results. There is a significant difference between experimental and simulation results as the existing material models are not applicable for TRIP steels. Micro texture studies were performed on the samples using EBSD and X-RD techniques. It was observed that austenite is transformed to martensite and texture developed during deformation had strong impact on limit strain and strain path.

Improved trip generation data for Texas using workplace and special generator surveys : workshop materials.

Science.gov (United States)

2014-08-01

Workshop Objectives: : Present Texas Trip Generation Manual : How developed : How it can be used, built upon : Provide examples and discuss : Present Generic WP Attraction Rates : Review Trip Attractions and Advanced Models

PyTRiP - a toolbox and GUI for the proton/ion therapy planning system TRiP

International Nuclear Information System (INIS)

Toftegaard, J; Bassler, N; Petersen, J B

2014-01-01

Purpose: Only very few treatment planning systems (TPS) are capable of handling heavy ions. Commercial heavy ion TPS are costly and normally restrict the possibility to implement new functionalities. PyTRiP provides Python bindings and a platform-independent graphical user interface (GUI) for the heavy ion treatment program TRiP, and adds seamless support of DICOM files. We aim to provide a front-end for TRiP which does not require any special computer skills. Methods: PyTRiP is written in Python combined with C for fast computing. Routines for DICOM file import/export to TRiPs native file format are implemented. The GUI comes as an executable with all its dependencies including PyTRiP making it easy to install on Windows, Mac and Linux. Results: PyTRiP is a comprehensive toolbox for handling TRiP. Treatment plans are handled using an object oriented structure. Bindings to TRiP (which only runs on Linux, either locally or on a remote server) are performed through a single function call. GUI users can intuitively create treatment plans without much knowledge about the TRiP user interface. Advanced users still have full access to all TRiP functionality. The user interface comes with a comprehensive plotting tool, which can visualize 2D contours, volume histograms, as well as dose- and linear energy transfer (LET) distributions. Conclusion: We developed a powerful toolbox for ion therapy research using TRiP as backend. The corresponding GUI allows to easily and intuitively create, calculate and visualize treatment plans. TRiP is thereby more accessible and simpler to use.

Using OpenTripPlanner to determine lowest cost home-work-home trips as an input to UrbanSim

CSIR Research Space (South Africa)

Waldeck, L

2014-09-01

Full Text Available for the provision of infrastructure and social facilities. The model is currently based on two open source projects, UrbanSim and Open Trip Planner. The paper describes the modifications that had to be introduced to apply the software in the South African context...

Air Turbines for Wave Energy Conversion

Directory of Open Access Journals (Sweden)

Manabu Takao

2012-01-01

Full Text Available This paper describes the present status of the art on air turbines, which could be used for wave energy conversion. The air turbines included in the paper are as follows: Wells type turbines, impulse turbines, radial turbines, cross-flow turbine, and Savonius turbine. The overall performances of the turbines under irregular wave conditions, which typically occur in the sea, have been compared by numerical simulation and sea trial. As a result, under irregular wave conditions it is found that the running and starting characteristics of the impulse type turbines could be superior to those of the Wells turbine. Moreover, as the current challenge on turbine technology, the authors explain a twin-impulse turbine topology for wave energy conversion.

TRIP13 is a protein-remodeling AAA+ ATPase that catalyzes MAD2 conformation switching.

Science.gov (United States)

Ye, Qiaozhen; Rosenberg, Scott C; Moeller, Arne; Speir, Jeffrey A; Su, Tiffany Y; Corbett, Kevin D

2015-04-28

The AAA+ family ATPase TRIP13 is a key regulator of meiotic recombination and the spindle assembly checkpoint, acting on signaling proteins of the conserved HORMA domain family. Here we present the structure of the Caenorhabditis elegans TRIP13 ortholog PCH-2, revealing a new family of AAA+ ATPase protein remodelers. PCH-2 possesses a substrate-recognition domain related to those of the protein remodelers NSF and p97, while its overall hexameric architecture and likely structural mechanism bear close similarities to the bacterial protein unfoldase ClpX. We find that TRIP13, aided by the adapter protein p31(comet), converts the HORMA-family spindle checkpoint protein MAD2 from a signaling-active 'closed' conformer to an inactive 'open' conformer. We propose that TRIP13 and p31(comet) collaborate to inactivate the spindle assembly checkpoint through MAD2 conformational conversion and disassembly of mitotic checkpoint complexes. A parallel HORMA protein disassembly activity likely underlies TRIP13's critical regulatory functions in meiotic chromosome structure and recombination.

TRIP13 is a protein-remodeling AAA+ ATPase that catalyzes MAD2 conformation switching

Energy Technology Data Exchange (ETDEWEB)

Ye, Qiaozhen [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Rosenberg, Scott C. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Moeller, Arne [National Resource for Automated Molecular Microscopy, Department of Integrative Structural and Computational Biology, The Scripps Research Institute, La Jolla, United States; Speir, Jeffrey A. [National Resource for Automated Molecular Microscopy, Department of Integrative Structural and Computational Biology, The Scripps Research Institute, La Jolla, United States; Su, Tiffany Y. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Corbett, Kevin D. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Department of Cellular and Molecular Medicine, University of California, San Diego, La Jolla, United States

2015-04-28

The AAA+ family ATPase TRIP13 is a key regulator of meiotic recombination and the spindle assembly checkpoint, acting on signaling proteins of the conserved HORMA domain family. Here we present the structure of the Caenorhabditis elegans TRIP13 ortholog PCH-2, revealing a new family of AAA+ ATPase protein remodelers. PCH-2 possesses a substrate-recognition domain related to those of the protein remodelers NSF and p97, while its overall hexameric architecture and likely structural mechanism bear close similarities to the bacterial protein unfoldase ClpX. We find that TRIP13, aided by the adapter protein p31(comet), converts the HORMA-family spindle checkpoint protein MAD2 from a signaling-active ‘closed’ conformer to an inactive ‘open’ conformer. We propose that TRIP13 and p31(comet) collaborate to inactivate the spindle assembly checkpoint through MAD2 conformational conversion and disassembly of mitotic checkpoint complexes. A parallel HORMA protein disassembly activity likely underlies TRIP13's critical regulatory functions in meiotic chromosome structure and recombination.

Benchmarking af kommunernes sagsbehandling

DEFF Research Database (Denmark)

Amilon, Anna

Fra 2007 skal Ankestyrelsen gennemføre benchmarking af kommuernes sagsbehandlingskvalitet. Formålet med benchmarkingen er at udvikle praksisundersøgelsernes design med henblik på en bedre opfølgning og at forbedre kommunernes sagsbehandling. Dette arbejdspapir diskuterer metoder for benchmarking...

Abnormal Events for Emergency Trip in HANARO

Energy Technology Data Exchange (ETDEWEB)

Ahn, Guk Hun; Choi, M. J.; Park, S. I.; Kim, H. W.; Kim, S. J.; Park, J. H.; Kwon, I. C

2006-12-15

This report gathers abnormal events related to emergency trip of HANARO that happened during its operation over 10 years since the first criticality on February 1995. The collected examples will be utilized to the HANARO's operators as a useful guide.

Development of a cause analysis system for a CPCS trip by using the rule-base deduction method.

Science.gov (United States)

Park, Je-Yun; Koo, In-Soo; Sohn, Chang-Ho; Kim, Jung-Seon; Cho, Gi-Ho; Park, Hee-Seok

2009-07-01

A Core Protection Calculator System (CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by a Combustion Engineering Company. The major function of the Core Protection Calculator System is to generate contact outputs for the Departure from Nucleate Boiling Ratio (DNBR) Trip and a Local Power Density (LPD) Trip. But in a Core Protection Calculator System, a trip cause cannot be identified, thus only trip signals are transferred to the Plant Protection System (PPS) and only the trip status is displayed. It could take a considerable amount of time and effort for a plant operator to analyze the trip causes of a Core Protection Calculator System. So, a Cause Analysis System for a Core Protection Calculator System (CASCPCS) has been developed by using the rule-base deduction method to assist operators in a Nuclear Power Plant. CASCPCS consists of three major parts. Inference engine has a role of controlling the searching knowledge base, executing the rules and tracking the inference process by using the depth-first searching method. Knowledge base consists of four major parts: rules, data base constants, trip buffer variables and causes. And a user interface is implemented by using menu-driven and window display techniques. The advantage of CASCPCS is that it saves time and effort to diagnose the trip causes of a Core Protection Calculator System, it increases a plant's availability and reliability, and it makes it easy to manage CASCPCS because of using only a cursor control.

Taking the Student to the World: Teaching Sensitive Issues Using Field Trips

Science.gov (United States)

Short, Fay; Lloyd, Tracey

2017-01-01

Field trips can provide an opportunity to take the student to the world, as an alternative to presenting the world to the student in the classroom. Such trips can create a forum for exploring controversial and distressing topics by exposing the students to first-hand experience, rather than second-hand accounts: witnessing the effects of blind…

MFTF TOTAL benchmark

International Nuclear Information System (INIS)

Choy, J.H.

1979-06-01

A benchmark of the TOTAL data base management system as applied to the Mirror Fusion Test Facility (MFTF) data base was implemented and run in February and March of 1979. The benchmark was run on an Interdata 8/32 and involved the following tasks: (1) data base design, (2) data base generation, (3) data base load, and (4) develop and implement programs to simulate MFTF usage of the data base

The Drill Down Benchmark

NARCIS (Netherlands)

P.A. Boncz (Peter); T. Rühl (Tim); F. Kwakkel

1998-01-01

textabstractData Mining places specific requirements on DBMS query performance that cannot be evaluated satisfactorily using existing OLAP benchmarks. The DD Benchmark - defined here - provides a practical case and yardstick to explore how well a DBMS is able to support Data Mining applications. It

Scaling up the mining of semantically-enriched trajectories: TripBuilder at the world level

OpenAIRE

Brilhante, Igo; Macedo, Jose Antonio; Nardini, Franco Maria; Perego, Raffaele; Renso, Chiara

2015-01-01

TripBuilder is an unsupervised system helping tourists to build their own personalized sightseeing tour [1,3,2]. Given a target touristic city, the time available for the visit, and the tourist's profile, TripBuilder provides a time-budgeted tour that maximizes tourist's interests and takes into account both the time needed to enjoy the at- tractions and to move from one Point of Interest (PoI) to the next one. The knowledge base feeding the sightseeing tour generation algorithm of TripBuilde...

SnapVideo: Personalized Video Generation for a Sightseeing Trip.

Science.gov (United States)

Zhang, Luming; Jing, Peiguang; Su, Yuting; Zhang, Chao; Shaoz, Ling

2017-11-01

Leisure tourism is an indispensable activity in urban people's life. Due to the popularity of intelligent mobile devices, a large number of photos and videos are recorded during a trip. Therefore, the ability to vividly and interestingly display these media data is a useful technique. In this paper, we propose SnapVideo, a new method that intelligently converts a personal album describing of a trip into a comprehensive, aesthetically pleasing, and coherent video clip. The proposed framework contains three main components. The scenic spot identification model first personalizes the video clips based on multiple prespecified audience classes. We then search for some auxiliary related videos from YouTube 1 according to the selected photos. To comprehensively describe a scenery, the view generation module clusters the crawled video frames into a number of views. Finally, a probabilistic model is developed to fit the frames from multiple views into an aesthetically pleasing and coherent video clip, which optimally captures the semantics of a sightseeing trip. Extensive user studies demonstrated the competitiveness of our method from an aesthetic point of view. Moreover, quantitative analysis reflects that semantically important spots are well preserved in the final video clip. 1 https://www.youtube.com/.

Superconducting Wind Turbine Generators

Directory of Open Access Journals (Sweden)

Yunying Pan

2016-08-01

Full Text Available Wind energy is well known as a renewable energy because its clean and less polluted characteristic, which is the foundation of development modern wind electricity. To find more efficient wind turbine is the focus of scientists around the world. Compared from conventional wind turbines, superconducting wind turbine generators have advantages at zero resistance, smaller size and lighter weight. Superconducting wind turbine will inevitably become the main trends in this area. This paper intends to introduce the basic concept and principle of superconductivity, and compare form traditional wind turbine to obtain superiority, then to summary three proposed machine concept.While superconductivity have difficulty  in modern technology and we also have proposed some challenges in achieving superconducting wind turbine finally.

Automatic Trip Detection with the Dutch Mobile Mobility Panel: Towards Reliable Multiple-Week Trip Registration for Large Samples

NARCIS (Netherlands)

Thomas, Tom; Geurs, Karst T.; Koolwaaij, Johan; Bijlsma, Marcel E.

2018-01-01

This paper examines the accuracy of trip and mode choice detection of the last wave of the Dutch Mobile Mobility Panel, a large-scale three-year, smartphone-based travel survey. Departure and arrival times, origins, destinations, modes, and travel purposes were recorded during a four week period in

Pelton turbines

CERN Document Server

Zhang, Zhengji

2016-01-01

This book concerns the theoretical foundations of hydromechanics of Pelton turbines from the engineering viewpoint. For reference purposes, all relevant flow processes and hydraulic aspects in a Pelton turbine have been analyzed completely and systematically. The analyses especially include the quantification of all possible losses existing in the Pelton turbine and the indication of most available potential for further enhancing the system efficiency. As a guideline the book therefore supports further developments of Pelton turbines with regard to their hydraulic designs and optimizations. It is thus suitable for the development and design engineers as well as those working in the field of turbo machinery. Many laws described in the book can also be directly used to simplify aspects of computational fluid dynamics (CFD) or to develop new computational methods. The well-executed examples help better understand the related flow mechanics.

Benchmarking and Learning in Public Healthcare

DEFF Research Database (Denmark)

Buckmaster, Natalie; Mouritsen, Jan

2017-01-01

This research investigates the effects of learning-oriented benchmarking in public healthcare settings. Benchmarking is a widely adopted yet little explored accounting practice that is part of the paradigm of New Public Management. Extant studies are directed towards mandated coercive benchmarking...

76 FR 52699 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses Involving No...

Science.gov (United States)

2011-08-23

... proposes to credit the automatic trip of the main turbine upon the initiation of a manual reactor trip for... credited manual reactor trip action that is part of the current licensing basis. Considerable defense-in... more robust AREVA Advanced W17 high thermal performance (HTP) fuel at Sequoyah Nuclear Plant (SQN...

Wind Turbine Technologies

DEFF Research Database (Denmark)

Hansen, Anca Daniela

2017-01-01

, and with or without gearboxes, using the latest in power electronics, aerodynamics, and mechanical drive train designs [4]. The main differences between all wind turbine concepts developed over the years, concern their electrical design and control. Today, the wind turbines on the market mix and match a variety......, the design of wind turbines has changed from being convention driven to being optimized driven within the operating regime and market environment. Wind turbine designs have progressed from fixed speed, passive controlled and with drive trains with gearboxes, to become variable speed, active controlled......,6] and to implement modern control system strategies....

Planning a pharmacy-led medical mission trip, part 2: servant leadership and team dynamics.

Science.gov (United States)

Brown, Dana A; Brown, Daniel L; Yocum, Christine K

2012-06-01

While pharmacy curricula can prepare students for the cognitive domains of pharmacy practice, mastery of the affective aspects can prove to be more challenging. At the Gregory School of Pharmacy, medical mission trips have been highly effective means of impacting student attitudes and beliefs. Specifically, these trips have led to transformational changes in student leadership capacity, turning an act of service into an act of influence. Additionally, building team unity is invaluable to the overall effectiveness of the trip. Pre-trip preparation for teams includes activities such as routine team meetings, team-building activities, and implementation of committees, as a means of promoting positive team dynamics. While in the field, team dynamics can be fostered through activities such as daily debriefing sessions, team disclosure times, and provision of medical services.

Development and Implementation of Mechanistic Terry Turbine Models in RELAP-7 to Simulate RCIC Normal Operation Conditions

Energy Technology Data Exchange (ETDEWEB)

Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); O' Brien, James Edward [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-09-01

As part of the efforts to understand the unexpected “self-regulating” mode of the RCIC (Reactor Core Isolation Cooling) systems in Fukushima accidents and extend BWR RCIC and PWR AFW (Auxiliary Feed Water) operational range and flexibility, mechanistic models for the Terry turbine, based on Sandia’s original work [1], have been developed and implemented in the RELAP-7 code to simulate the RCIC system. In 2016, our effort has been focused on normal working conditions of the RCIC system. More complex off-design conditions will be pursued in later years when more data are available. In the Sandia model, the turbine stator inlet velocity is provided according to a reduced-order model which was obtained from a large number of CFD (computational fluid dynamics) simulations. In this work, we propose an alternative method, using an under-expanded jet model to obtain the velocity and thermodynamic conditions for the turbine stator inlet. The models include both an adiabatic expansion process inside the nozzle and a free expansion process outside of the nozzle to ambient pressure. The combined models are able to predict the steam mass flow rate and supersonic velocity to the Terry turbine bucket entrance, which are the necessary input information for the Terry turbine rotor model. The analytical models for the nozzle were validated with experimental data and benchmarked with CFD simulations. The analytical models generally agree well with the experimental data and CFD simulations. The analytical models are suitable for implementation into a reactor system analysis code or severe accident code as part of mechanistic and dynamical models to understand the RCIC behaviors. The newly developed nozzle models and modified turbine rotor model according to the Sandia’s original work have been implemented into RELAP-7, along with the original Sandia Terry turbine model. A new pump model has also been developed and implemented to couple with the Terry turbine model. An input

Benchmarking & European Sustainable Transport Policies

DEFF Research Database (Denmark)

Gudmundsson, H.

2003-01-01

, Benchmarking is one of the management tools that have recently been introduced in the transport sector. It is rapidly being applied to a wide range of transport operations, services and policies. This paper is a contribution to the discussion of the role of benchmarking in the future efforts to...... contribution to the discussions within the Eusponsored BEST Thematic Network (Benchmarking European Sustainable Transport) which ran from 2000 to 2003....

Benchmarking – A tool for judgment or improvement?

DEFF Research Database (Denmark)

Rasmussen, Grane Mikael Gregaard

2010-01-01

perceptions of benchmarking will be presented; public benchmarking and best practice benchmarking. These two types of benchmarking are used to characterize and discuss the Danish benchmarking system and to enhance which effects, possibilities and challenges that follow in the wake of using this kind......Change in construction is high on the agenda for the Danish government and a comprehensive effort is done in improving quality and efficiency. This has led to an initiated governmental effort in bringing benchmarking into the Danish construction sector. This paper is an appraisal of benchmarking...... as it is presently carried out in the Danish construction sector. Many different perceptions of benchmarking and the nature of the construction sector, lead to an uncertainty in how to perceive and use benchmarking, hence, generating an uncertainty in understanding the effects of benchmarking. This paper addresses...

Storage-Intensive Supercomputing Benchmark Study

Energy Technology Data Exchange (ETDEWEB)

Cohen, J; Dossa, D; Gokhale, M; Hysom, D; May, J; Pearce, R; Yoo, A

2007-10-30

Critical data science applications requiring frequent access to storage perform poorly on today's computing architectures. This project addresses efficient computation of data-intensive problems in national security and basic science by exploring, advancing, and applying a new form of computing called storage-intensive supercomputing (SISC). Our goal is to enable applications that simply cannot run on current systems, and, for a broad range of data-intensive problems, to deliver an order of magnitude improvement in price/performance over today's data-intensive architectures. This technical report documents much of the work done under LDRD 07-ERD-063 Storage Intensive Supercomputing during the period 05/07-09/07. The following chapters describe: (1) a new file I/O monitoring tool iotrace developed to capture the dynamic I/O profiles of Linux processes; (2) an out-of-core graph benchmark for level-set expansion of scale-free graphs; (3) an entity extraction benchmark consisting of a pipeline of eight components; and (4) an image resampling benchmark drawn from the SWarp program in the LSST data processing pipeline. The performance of the graph and entity extraction benchmarks was measured in three different scenarios: data sets residing on the NFS file server and accessed over the network; data sets stored on local disk; and data sets stored on the Fusion I/O parallel NAND Flash array. The image resampling benchmark compared performance of software-only to GPU-accelerated. In addition to the work reported here, an additional text processing application was developed that used an FPGA to accelerate n-gram profiling for language classification. The n-gram application will be presented at SC07 at the High Performance Reconfigurable Computing Technologies and Applications Workshop. The graph and entity extraction benchmarks were run on a Supermicro server housing the NAND Flash 40GB parallel disk array, the Fusion-io. The Fusion system specs are as follows

Analysis methodology for the post-trip return to power steam line break event

Energy Technology Data Exchange (ETDEWEB)

Lee, Chul Shin; Kim, Chul Woo; You, Hyung Keun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-06-01

An analysis for Steam Line Break (SLB) events which result in a Return-to-Power (RTP) condition after reactor trip was performed for a postulated Yonggwang Nuclear Power Plant Unit 3 cycle 8. Analysis methodology for post-trip RTP SLB is quite different from that of non-RTP SLB and is more difficult. Therefore, it is necessary to develop a methodology to analyze the response of the NSSS parameters to the post-trip RTP SLB events and the fuel performance after the total reactivity exceeds the criticality. In this analysis, the cases with and without offsite power were simulated crediting 3-D reactivity feedback effect due to a local heatup in the vicinity of stuck CEA and compared with the cases without 3-D reactivity feedback with respect to post-trip fuel performance. Departure-to Nucleate Boiling Ratio (DNBR) and Linear Heat Generation Rate (LHGR). 36 tabs., 32 figs., 11 refs. (Author) .new.

BONFIRE: benchmarking computers and computer networks

OpenAIRE

Bouckaert, Stefan; Vanhie-Van Gerwen, Jono; Moerman, Ingrid; Phillips, Stephen; Wilander, Jerker

2011-01-01

The benchmarking concept is not new in the field of computing or computer networking. With “benchmarking tools”, one usually refers to a program or set of programs, used to evaluate the performance of a solution under certain reference conditions, relative to the performance of another solution. Since the 1970s, benchmarking techniques have been used to measure the performance of computers and computer networks. Benchmarking of applications and virtual machines in an Infrastructure-as-a-Servi...

The Isprs Benchmark on Indoor Modelling

Science.gov (United States)

Khoshelham, K.; Díaz Vilariño, L.; Peter, M.; Kang, Z.; Acharya, D.

2017-09-01

Automated generation of 3D indoor models from point cloud data has been a topic of intensive research in recent years. While results on various datasets have been reported in literature, a comparison of the performance of different methods has not been possible due to the lack of benchmark datasets and a common evaluation framework. The ISPRS benchmark on indoor modelling aims to address this issue by providing a public benchmark dataset and an evaluation framework for performance comparison of indoor modelling methods. In this paper, we present the benchmark dataset comprising several point clouds of indoor environments captured by different sensors. We also discuss the evaluation and comparison of indoor modelling methods based on manually created reference models and appropriate quality evaluation criteria. The benchmark dataset is available for download at: html"target="_blank">http://www2.isprs.org/commissions/comm4/wg5/benchmark-on-indoor-modelling.html.

Benchmarking the energy efficiency of commercial buildings

International Nuclear Information System (INIS)

Chung, William; Hui, Y.V.; Lam, Y. Miu

2006-01-01

Benchmarking energy-efficiency is an important tool to promote the efficient use of energy in commercial buildings. Benchmarking models are mostly constructed in a simple benchmark table (percentile table) of energy use, which is normalized with floor area and temperature. This paper describes a benchmarking process for energy efficiency by means of multiple regression analysis, where the relationship between energy-use intensities (EUIs) and the explanatory factors (e.g., operating hours) is developed. Using the resulting regression model, these EUIs are then normalized by removing the effect of deviance in the significant explanatory factors. The empirical cumulative distribution of the normalized EUI gives a benchmark table (or percentile table of EUI) for benchmarking an observed EUI. The advantage of this approach is that the benchmark table represents a normalized distribution of EUI, taking into account all the significant explanatory factors that affect energy consumption. An application to supermarkets is presented to illustrate the development and the use of the benchmarking method

Numisheet2005 Benchmark Analysis on Forming of an Automotive Underbody Cross Member: Benchmark 2

International Nuclear Information System (INIS)

Buranathiti, Thaweepat; Cao Jian

2005-01-01

This report presents an international cooperation benchmark effort focusing on simulations of a sheet metal stamping process. A forming process of an automotive underbody cross member using steel and aluminum blanks is used as a benchmark. Simulation predictions from each submission are analyzed via comparison with the experimental results. A brief summary of various models submitted for this benchmark study is discussed. Prediction accuracy of each parameter of interest is discussed through the evaluation of cumulative errors from each submission

Pitchcontrol of wind turbines using model free adaptivecontrol based on wind turbine code

DEFF Research Database (Denmark)

Zhang, Yunqian; Chen, Zhe; Cheng, Ming

2011-01-01

value is only based on I/O data of the wind turbine is identified and then the wind turbine system is replaced by a dynamic linear time-varying model. In order to verify the correctness and robustness of the proposed model free adaptive pitch controller, the wind turbine code FAST which can predict......As the wind turbine is a nonlinear high-order system, to achieve good pitch control performance, model free adaptive control (MFAC) approach which doesn't need the mathematical model of the wind turbine is adopted in the pitch control system in this paper. A pseudo gradient vector whose estimation...... the wind turbine loads and response in high accuracy is used. The results show that the controller produces good dynamic performance, good robustness and adaptability....

SKaMPI: A Comprehensive Benchmark for Public Benchmarking of MPI

Directory of Open Access Journals (Sweden)

Ralf Reussner

2002-01-01

Full Text Available The main objective of the MPI communication library is to enable portable parallel programming with high performance within the message-passing paradigm. Since the MPI standard has no associated performance model, and makes no performance guarantees, comprehensive, detailed and accurate performance figures for different hardware platforms and MPI implementations are important for the application programmer, both for understanding and possibly improving the behavior of a given program on a given platform, as well as for assuring a degree of predictable behavior when switching to another hardware platform and/or MPI implementation. We term this latter goal performance portability, and address the problem of attaining performance portability by benchmarking. We describe the SKaMPI benchmark which covers a large fraction of MPI, and incorporates well-accepted mechanisms for ensuring accuracy and reliability. SKaMPI is distinguished among other MPI benchmarks by an effort to maintain a public performance database with performance data from different hardware platforms and MPI implementations.

Turbine Imaging Technology Assessment

Energy Technology Data Exchange (ETDEWEB)

Moursund, Russell A.; Carlson, Thomas J.

2004-12-31

The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions.

Turbine Imaging Technology Assessment

International Nuclear Information System (INIS)

Moursund, Russell A.; Carlson, Thomas J.

2004-01-01

The goal of this project was to identify and evaluate imaging alternatives for observing the behavior of juvenile fish within an operating Kaplan turbine unit with a focus on methods to quantify fish injury mechanisms inside an operating turbine unit. Imaging methods are particularly needed to observe the approach and interaction of fish with turbine structural elements. This evaluation documents both the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. The information may be used to acquire the scientific knowledge to make structural improvements and create opportunities for industry to modify turbines and improve fish passage conditions

Wind Turbines Wake Aerodynamics

DEFF Research Database (Denmark)

Vermeer, L.; Sørensen, Jens Nørkær; Crespo, A.

2003-01-01

The aerodynamics of horizontal axis wind turbine wakes is studied. The contents is directed towards the physics of power extraction by wind turbines and reviews both the near and the far wake region. For the near wake, the survey is restricted to uniform, steady and parallel flow conditions......, thereby excluding wind shear, wind speed and rotor setting changes and yawed conditions. The emphasis is put on measurements in controlled conditions.For the far wake, the survey focusses on both single turbines and wind farm effects, and the experimental and numerical work are reviewed; the main interest...... is to study how the far wake decays downstream, in order to estimate the effect produced in downstream turbines.The article is further restricted to horizontal axis wind turbines and excludes all other types of turbines....

Entropy-based benchmarking methods

NARCIS (Netherlands)

Temurshoev, Umed

2012-01-01

We argue that benchmarking sign-volatile series should be based on the principle of movement and sign preservation, which states that a bench-marked series should reproduce the movement and signs in the original series. We show that the widely used variants of Denton (1971) method and the growth

Estimation of acceptable beam trip frequencies of accelerators for ADS and comparison with performances of existing accelerators

International Nuclear Information System (INIS)

Takei, Hayanori; Tsujimoto, Kazufumi; Nishihara, Kenji; Furukawa, Kazuro; Yano, Yoshiharu; Ogawa, Yujiro; Oigawa, Hiroyuki

2009-09-01

Frequent beam trips as experienced in existing high power proton accelerators may cause thermal fatigue problems in ADS components which may lead to degradation of their structural integrity and reduction of their lifetime. Thermal transient analyses were performed to investigate the effects of beam trips on the reactor components, with the objective of formulating ADS design that had higher engineering possibilities and determining the requirements for accelerator reliability. These analyses were made on the thermal responses of four parts of the reactor components; the beam window, the cladding tube, the inner barrel and the reactor vessel. Our results indicated that the acceptable frequency of beam trips ranged from 50 to 2x10 4 times per year depending on the beam trip duration. As the beam trips for durations exceeding five minutes were assumed to make the plant shut down and restart, the plant availability was estimated to be 70%. In order to consider measures to reduce the frequency of beam trips on the high power accelerator for ADS, we compared the acceptable frequency of beam trips with the operation data of existing accelerators. The result of this comparison showed that for typical conditions the beam trip frequency for durations of 10 seconds or less was within the acceptable level, while that exceeding five minutes should be reduced to about 1/30 to satisfy the thermal stress conditions. (author)

Spatial interaction models from Irish commuting data: variations in trip length by occupation and gender

Science.gov (United States)

O'Kelly, Morton E.; Niedzielski, Michael A.; Gleeson, Justin

2012-10-01

Core and peripheral contrasts in journey-to-work trip length can be interpreted as imputing the relative value of origin and destination accessibility (yielding theoretical proxies for rent and wages). Because the main variables are shown to be critically dependent on spatial structure, they may be interpreted as showing the shadow prices due to comparative location. There is also a unifying connection between these results and the existing literature on many dimensions: rent gradients, accessibility, and emissivity. In an empirical example, the advantages of a panoramic view of national commuting statistics are shown, using an Irish data set. Variations in the rates of participation in trip making by location, occupation, and gender are examined. Places that emit more trips than would be expected from their relative location are identified. Further, examining ways in which such emissivity is sensitive to a change in trip length highlights the regions where trips could possibly be adjusted to produce a shorter average trip length or which might be especially sensitive to reduction in employment. A careful reinterpretation of one of the key outputs from a calibrated spatial interaction model is shown to be consistent with the declining rent gradient expected from Alonso's theory of land use.

Power reactor pressure vessel benchmarks

International Nuclear Information System (INIS)

Rahn, F.J.

1978-01-01

A review is given of the current status of experimental and calculational benchmarks for use in understanding the radiation embrittlement effects in the pressure vessels of operating light water power reactors. The requirements of such benchmarks for application to pressure vessel dosimetry are stated. Recent developments in active and passive neutron detectors sensitive in the ranges of importance to embrittlement studies are summarized and recommendations for improvements in the benchmark are made. (author)

Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels

Energy Technology Data Exchange (ETDEWEB)

El-Taib Heakal, F., E-mail: fakihaheakal@yahoo.com [Chemistry Department, Faculty of Science, Cairo University, Giza 12613 (Egypt); Tantawy, N.S. [Chemistry Department, Girl' s College for Arts, Science and Education, Ain Shams University, Cairo (Egypt); Shehta, O.S. [Physical Chemistry Department, National Research Centre, Dokki, Giza (Egypt)

2011-10-17

Highlights: {yields} Systematic increase of chloride concentration has a critical influence on TRIP steel corrosion. {yields} TRIP microalloyed with Nb and Cr showed lower corrosion rate and smaller threshold Cl{sup -} value. {yields} Increasing Al content by 220 times in the TRIP deteriorates its corrosion behavior. {yields} Impedance results and surface examinations confirmed the obtained results. - Abstract: The effect of a systematic increase of chloride ion concentration on the electrochemical corrosion behavior of two types of Al-bearing TRIP steels (T{sub 1} and T{sub 2}) was studied in aqueous NaCl solutions. Several electrochemical techniques were used comprising open circuit potential measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Chloride concentration has a critical influence on the corrosion rate of the two tested steel samples. For both steels the corrosion rate first increased with increasing chloride content up to a certain critical concentration (CC), and then decreased in solution with chloride level higher than the threshold value. TRIP steel T{sub 1} microalloyed with Nb and Cr as compared to steel T{sub 2} not containing these two elements, exhibited lower corrosion rate and smaller CC value, indicating better corrosion resistance to chloride attack, albeit the Al content in T{sub 2} is 220 times higher than that in T{sub 1}. This is because Nb alloyed with TRIP steel likely enhances the formation on the surface of a stable rust layer enriched with other passivating elements Al, Cu, Cr and Ni, which has higher corrosion resistance and hence improve greatly the passive performance of the TRIP sample. The ac impedance data are in good agreement with the OCP and dc polarization measurements. Surface examinations via scanning electron microscope confirmed well the obtained results.

Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels

International Nuclear Information System (INIS)

El-Taib Heakal, F.; Tantawy, N.S.; Shehta, O.S.

2011-01-01

Highlights: → Systematic increase of chloride concentration has a critical influence on TRIP steel corrosion. → TRIP microalloyed with Nb and Cr showed lower corrosion rate and smaller threshold Cl - value. → Increasing Al content by 220 times in the TRIP deteriorates its corrosion behavior. → Impedance results and surface examinations confirmed the obtained results. - Abstract: The effect of a systematic increase of chloride ion concentration on the electrochemical corrosion behavior of two types of Al-bearing TRIP steels (T 1 and T 2 ) was studied in aqueous NaCl solutions. Several electrochemical techniques were used comprising open circuit potential measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Chloride concentration has a critical influence on the corrosion rate of the two tested steel samples. For both steels the corrosion rate first increased with increasing chloride content up to a certain critical concentration (CC), and then decreased in solution with chloride level higher than the threshold value. TRIP steel T 1 microalloyed with Nb and Cr as compared to steel T 2 not containing these two elements, exhibited lower corrosion rate and smaller CC value, indicating better corrosion resistance to chloride attack, albeit the Al content in T 2 is 220 times higher than that in T 1 . This is because Nb alloyed with TRIP steel likely enhances the formation on the surface of a stable rust layer enriched with other passivating elements Al, Cu, Cr and Ni, which has higher corrosion resistance and hence improve greatly the passive performance of the TRIP sample. The ac impedance data are in good agreement with the OCP and dc polarization measurements. Surface examinations via scanning electron microscope confirmed well the obtained results.

Shielding benchmark problems, (2)

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Shin, Kazuo; Tada, Keiko.

1980-02-01

Shielding benchmark problems prepared by Working Group of Assessment of Shielding Experiments in the Research Committee on Shielding Design in the Atomic Energy Society of Japan were compiled by Shielding Laboratory in Japan Atomic Energy Research Institute. Fourteen shielding benchmark problems are presented newly in addition to twenty-one problems proposed already, for evaluating the calculational algorithm and accuracy of computer codes based on discrete ordinates method and Monte Carlo method and for evaluating the nuclear data used in codes. The present benchmark problems are principally for investigating the backscattering and the streaming of neutrons and gamma rays in two- and three-dimensional configurations. (author)

Electricity consumption in school buildings - benchmark and web tools; Elforbrug i skoler - benchmark og webvaerktoej

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The aim of this project has been to produce benchmarks for electricity consumption in Danish schools in order to encourage electricity conservation. An internet programme has been developed with the aim of facilitating schools' access to benchmarks and to evaluate energy consumption. The overall purpose is to create increased attention to the electricity consumption of each separate school by publishing benchmarks which take the schools' age and number of pupils as well as after school activities into account. Benchmarks can be used to make green accounts and work as markers in e.g. energy conservation campaigns, energy management and for educational purposes. The internet tool can be found on www.energiguiden.dk. (BA)

Additive Benefits of Twice Forest Bathing Trips in Elderly Patients with Chronic Heart Failure.

Science.gov (United States)

Mao, Gen Xiang; Cao, Yong Bao; Yang, Yan; Chen, Zhuo Mei; Dong, Jian Hua; Chen, Sha Sha; Wu, Qing; Lyu, Xiao Ling; Jia, Bing Bing; Yan, Jing; Wang, Guo Fu

2018-02-01

Chronic heart failure (CHF), a clinical syndrome resulting from the consequences of various cardiovascular diseases (CVDs), is increasingly becoming a global cause of morbidity and mortality. We had earlier demonstrated that a 4-day forest bathing trip can provide an adjunctive therapeutic influence on patients with CHF. To further investigate the duration of the impact and the optimal frequency of forest bathing trips in patients with CHF, we recruited those subjects who had experienced the first forest bathing trip again after 4 weeks and randomly categorized them into two groups, namely, the urban control group (city) and the forest bathing group (forest). After a second 4-day forest bathing trip, we observed a steady decline in the brain natriuretic peptide levels, a biomarker of heart failure, and an attenuated inflammatory response as well as oxidative stress. Thus, this exploratory study demonstrated the additive benefits of twice forest bathing trips in elderly patients with CHF, which could further pave the way for analyzing the effects of such interventions in CVDs. Copyright © 2018 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

HS06 Benchmark for an ARM Server

Science.gov (United States)

Kluth, Stefan

2014-06-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

HS06 benchmark for an ARM server

International Nuclear Information System (INIS)

Kluth, Stefan

2014-01-01

We benchmarked an ARM cortex-A9 based server system with a four-core CPU running at 1.1 GHz. The system used Ubuntu 12.04 as operating system and the HEPSPEC 2006 (HS06) benchmarking suite was compiled natively with gcc-4.4 on the system. The benchmark was run for various settings of the relevant gcc compiler options. We did not find significant influence from the compiler options on the benchmark result. The final HS06 benchmark result is 10.4.

A Review of Research on School Field Trips and Their Value in Education

Science.gov (United States)

Behrendt, Marc; Franklin, Teresa

2014-01-01

The purpose of this paper is to examine the importance of science field trips as educational tools to connect students to classroom concepts. Experiential learning at formal and informal field trip venues increases student interest, knowledge, and motivation. The teacher's role in preplanning, implementation, and reflection often dictates the…

THE EFFECTIVENESS OF A VIRTUAL FIELD TRIP (VFT MODULE IN LEARNING BIOLOGY

Directory of Open Access Journals (Sweden)

Norbaizura HARIS

2015-07-01

Full Text Available Virtual Field Trip is a computer aided module of science developed to study the Colonisation and Succession in Mangrove Swamps, as an alternative to the real field trip in Form for Biology. This study is to identify the effectiveness of the Virtual Field Trip (VFT module towards the level of achievement in the formative test for this topic. This study was conducted to 60 students employing a quasi-experimental design involving a treatment group taught using the VFT module and a control group who were taught using conventional methods. Analysis into the effectiveness of the virtual module was done descriptively, followed by inferential analysis involving the two-way ANOVA. The results showed significant differences in the mean scores of pre and post achievement between students taught using VFT and students who were taught using conventional methods for objective, structure and essay type questions. The study concluded that teaching and learning by using the VFT module, integrated with ICT, has a positive impact on student achievement whencompared to conventional methods. This study focuses on the use of the VFT recognizing that teachers are often unable to conduct a real field trip on location.

Gas turbines

Energy Technology Data Exchange (ETDEWEB)

Farahan, E.; Eudaly, J.P.

1978-10-01

This evaluation provides performance and cost data for commercially available simple- and regenerative-cycle gas turbines. Intercooled, reheat, and compound cycles are discussed from theoretical basis only, because actual units are not currently available, except on a special-order basis. Performance characteristics investigated include unit efficiency at full-load and off-design conditions, and at rated capacity. Costs are tabulated for both simple- and regenerative-cycle gas turbines. The output capacity of the gas turbines investigated ranges from 80 to 134,000 hp for simple units and from 12,000 to 50,000 hp for regenerative units.

Turbine related fish mortality

International Nuclear Information System (INIS)

Eicher, G.J.

1993-01-01

A literature review was conducted to assess the factors affecting turbine-related fish mortality. The mechanics of fish passage through a turbine is outlined, and various turbine related stresses are described, including pressure and shear effects, hydraulic head, turbine efficiency, and tailwater level. The methodologies used in determining the effects of fish passage are evaluated. The necessity of adequate controls in each test is noted. It is concluded that mortality is the result of several factors such as hardiness of study fish, fish size, concentrations of dissolved gases, and amounts of cavitation. Comparisons between Francis and Kaplan turbines indicate little difference in percent mortality. 27 refs., 5 figs

Performance Targets and External Benchmarking

DEFF Research Database (Denmark)

Friis, Ivar; Hansen, Allan; Vámosi, Tamás S.

Research on relative performance measures, transfer pricing, beyond budgeting initiatives, target costing, piece rates systems and value based management has for decades underlined the importance of external benchmarking in performance management. Research conceptualises external benchmarking...... as a market mechanism that can be brought inside the firm to provide incentives for continuous improvement and the development of competitive advances. However, whereas extant research primarily has focused on the importance and effects of using external benchmarks, less attention has been directed towards...... the conditions upon which the market mechanism is performing within organizations. This paper aims to contribute to research by providing more insight to the conditions for the use of external benchmarking as an element in performance management in organizations. Our study explores a particular type of external...

Spreading Geodiversity awareness in schools through field trips and ICT

Science.gov (United States)

Magagna, Alessandra; Giardino, Marco; Ferrero, Elena

2014-05-01

Geodiversity, unlike Biodiversity, is not a topic included in the Italian schools curriculum. Nevertheless, Geomorphology is taught at all levels, and it seems to be the right tool for introducing the students to the concepts related to Geodiversity. In this context, a research on the use of field trips and Information and Communication Technologies (ICT) is being carried out for spreading the value of Geodiversity in Secondary Schools. Relevant international literature states that field trips are effective didactic tools for Earth Science education, because they stimulate an active learning process and allow students to appreciate the geological complexity of an area. On the other side, ICT allow students to get knowledge about the variety of landforms of their own territory by staying indoor, using virtual field trips and free software like Google Earth, Google Maps, Bing etc. In order to connect the two strategies, an innovative educational project is proposed here; it involves both the indoor and the outdoor activities, by enhancing a critical approach to the complexity of geological processes. As a starting point, a multimedia product on 20 Italian geological tours, designed for analyzing Geodiversity at a regional scale, has been tested with teachers and students, in order to understand its effectiveness by using it solely indoor. In a second phase, teachers and students have been proposed to compare and integrate indoor and outdoor activities to approach Geodiversity directly at a local scale, by means of targeted field trips. For achieving this goal, during the field trips, students used their mobile devices (smartphone and tablet) equipped with free and/or open source applications (Epicollect, Trimble Outdoor Navigator). These tools allow to track field trips, to gather data (geomorphological observations and related photographs), and to elaborate them in the laboratory; a process useful for reasoning on concepts such as spatial and temporal scales and for

Turbulence and wind turbines

DEFF Research Database (Denmark)

Brand, Arno J.; Peinke, Joachim; Mann, Jakob

2011-01-01

The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed.......The nature of turbulent flow towards, near and behind a wind turbine, the effect of turbulence on the electricity production and the mechanical loading of individual and clustered wind turbines, and some future issues are discussed....

Benchmarking in Czech Higher Education

OpenAIRE

Plaček Michal; Ochrana František; Půček Milan

2015-01-01

The first part of this article surveys the current experience with the use of benchmarking at Czech universities specializing in economics and management. The results indicate that collaborative benchmarking is not used on this level today, but most actors show some interest in its introduction. The expression of the need for it and the importance of benchmarking as a very suitable performance-management tool in less developed countries are the impetus for the second part of our article. Base...

Optimal design of marine steam turbine

International Nuclear Information System (INIS)

Liu Chengyang; Yan Changqi; Wang Jianjun

2012-01-01

The marine steam turbine is one of the key equipment in marine power plant, and it tends to using high power steam turbine, which makes the steam turbine to be heavier and larger, it causes difficulties to the design and arrangement of the steam turbine, and the marine maneuverability is seriously influenced. Therefore, it is necessary to apply optimization techniques to the design of the steam turbine in order to achieve the minimum weight or volume by means of finding the optimum combination of design parameters. The math model of the marine steam turbine design calculation was established. The sensitivities of condenser pressure, power ratio of HP turbine with LP turbine, and the ratio of diameter with height at the end stage of LP turbine, which influence the weight of the marine steam turbine, were analyzed. The optimal design of the marine steam turbine, aiming at the weight minimization while satisfying the structure and performance constraints, was carried out with the hybrid particle swarm optimization algorithm. The results show that, steam turbine weight is reduced by 3.13% with the optimization scheme. Finally, the optimization results were analyzed, and the steam turbine optimization design direction was indicated. (authors)

Benchmark simulation models, quo vadis?

Science.gov (United States)

Jeppsson, U; Alex, J; Batstone, D J; Benedetti, L; Comas, J; Copp, J B; Corominas, L; Flores-Alsina, X; Gernaey, K V; Nopens, I; Pons, M-N; Rodríguez-Roda, I; Rosen, C; Steyer, J-P; Vanrolleghem, P A; Volcke, E I P; Vrecko, D

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, highlighting areas where knowledge may still be deficient and where new opportunities are emerging, and to propose potential avenues for future development and application of the general benchmarking framework and its associated tools. The paper focuses on the topics of temporal and spatial extension, process modifications within the WWTP, the realism of models, control strategy extensions and the potential for new evaluation tools within the existing benchmark system. We find that there are major opportunities for application within all of these areas, either from existing work already being done within the context of the benchmarking simulation models (BSMs) or applicable work in the wider literature. Of key importance is increasing capability, usability and transparency of the BSM package while avoiding unnecessary complexity.

A Seafloor Benchmark for 3-dimensional Geodesy

Science.gov (United States)

Chadwell, C. D.; Webb, S. C.; Nooner, S. L.

2014-12-01

We have developed an inexpensive, permanent seafloor benchmark to increase the longevity of seafloor geodetic measurements. The benchmark provides a physical tie to the sea floor lasting for decades (perhaps longer) on which geodetic sensors can be repeatedly placed and removed with millimeter resolution. Global coordinates estimated with seafloor geodetic techniques will remain attached to the benchmark allowing for the interchange of sensors as they fail or become obsolete, or for the sensors to be removed and used elsewhere, all the while maintaining a coherent series of positions referenced to the benchmark. The benchmark has been designed to free fall from the sea surface with transponders attached. The transponder can be recalled via an acoustic command sent from the surface to release from the benchmark and freely float to the sea surface for recovery. The duration of the sensor attachment to the benchmark will last from a few days to a few years depending on the specific needs of the experiment. The recovered sensors are then available to be reused at other locations, or again at the same site in the future. Three pins on the sensor frame mate precisely and unambiguously with three grooves on the benchmark. To reoccupy a benchmark a Remotely Operated Vehicle (ROV) uses its manipulator arm to place the sensor pins into the benchmark grooves. In June 2014 we deployed four benchmarks offshore central Oregon. We used the ROV Jason to successfully demonstrate the removal and replacement of packages onto the benchmark. We will show the benchmark design and its operational capabilities. Presently models of megathrust slip within the Cascadia Subduction Zone (CSZ) are mostly constrained by the sub-aerial GPS vectors from the Plate Boundary Observatory, a part of Earthscope. More long-lived seafloor geodetic measures are needed to better understand the earthquake and tsunami risk associated with a large rupture of the thrust fault within the Cascadia subduction zone

The Concepts "Benchmarks and Benchmarking" Used in Education Planning: Teacher Education as Example

Science.gov (United States)

Steyn, H. J.

2015-01-01

Planning in education is a structured activity that includes several phases and steps that take into account several kinds of information (Steyn, Steyn, De Waal & Wolhuter, 2002: 146). One of the sets of information that are usually considered is the (so-called) "benchmarks" and "benchmarking" regarding the focus of a…

Coordinated Control of Cross-Flow Turbines

Science.gov (United States)

Strom, Benjamin; Brunton, Steven; Polagye, Brian

2016-11-01

Cross-flow turbines, also known as vertical-axis turbines, have several advantages over axial-flow turbines for a number of applications including urban wind power, high-density arrays, and marine or fluvial currents. By controlling the angular velocity applied to the turbine as a function of angular blade position, we have demonstrated a 79 percent increase in cross-flow turbine efficiency over constant-velocity control. This strategy uses the downhill simplex method to optimize control parameter profiles during operation of a model turbine in a recirculating water flume. This optimization method is extended to a set of two turbines, where the blade motions and position of the downstream turbine are optimized to beneficially interact with the coherent structures in the wake of the upstream turbine. This control scheme has the potential to enable high-density arrays of cross-flow turbines to operate at cost-effective efficiency. Turbine wake and force measurements are analyzed for insight into the effect of a coordinated control strategy.

Wind turbines and idiopathic symptoms

DEFF Research Database (Denmark)

Blanes-Vidal, Victoria; Schwartz, Joel

2016-01-01

Whether or not wind turbines pose a risk to human health is a matter of heated debate. Personal reactions to other environmental exposures occurring in the same settings as wind turbines may be responsible of the reported symptoms. However, these have not been accounted for in previous studies. We...... investigated whether there is an association between residential proximity to wind turbines and idiopathic symptoms, after controlling for personal reactions to other environmental co-exposures. We assessed wind turbine exposures in 454 residences as the distance to the closest wind turbine (Dw) and number...... of wind turbines

Aerodynamic Benchmarking of the Deepwind Design

DEFF Research Database (Denmark)

Bedona, Gabriele; Schmidt Paulsen, Uwe; Aagaard Madsen, Helge

2015-01-01

The aerodynamic benchmarking for the DeepWind rotor is conducted comparing different rotor geometries and solutions and keeping the comparison as fair as possible. The objective for the benchmarking is to find the most suitable configuration in order to maximize the power production and minimize...... the blade solicitation and the cost of energy. Different parameters are considered for the benchmarking study. The DeepWind blade is characterized by a shape similar to the Troposkien geometry but asymmetric between the top and bottom parts: this shape is considered as a fixed parameter in the benchmarking...

Hawaii Longline Fishery Trip Expenditure (2004 to present)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This is a time-series dataset of trip expenditure data for the Hawaii-based longline fleet for the period August 2004 to present. The data collection includes 10...

The trip status and the reduction countermeasure in Kori nuclear power plant unit 1 and 2

International Nuclear Information System (INIS)

Kim, Jung-Soo

1991-01-01

Nuclear power account for 36% of Korea's total electric capacity and provided over 50% of the net electric power supply by June 1991. These plants supply US with the cheapest and most stable electric supply available. However each units capacity is very large and a plant trip due to failure of a component or a human error has a great influence on the nations electric power supply and drastically decreases the reserve margin. This report will analyze the trip causes and measure the trip frequency from the first commercial operation of Kori unit 1 and 2 to the end of June 1991, reflect to the plant operation, management and facility modification, etc. This will minimize the number of trips or urgent power reductions and thus contribute to an increase in plant capacity factor and safety, and stabilize the electric power demand and supply. The safety and the economy of nuclear power plant have to be secured and raised respectably by increasing the capacity factor. Since the prevention of trips plays an important role in the plant safety and economy, we have to do our best to prevent the unexpected trip

Discrete-Choice Modeling Of Non-Working Women’s Trip-Chaining Activity Based

Science.gov (United States)

Hayati, Amelia; Pradono; Purboyo, Heru; Maryati, Sri

2018-05-01

Start The urban developments of technology and economics are now changing the lifestyles of the urban societies. It is also changing their travel demand to meet their movement needs. Nowadays, urban women, especially in Bandung, West Java, have a high demand for their daily travel and tend to increase. They have the ease of accessibility to personal modes of transportation and freedom to go anywhere to meet their personal and family needs. This also happens to non-working women or as housewives in the city of Bandung. More than 50% of women’s mobility is outside the home, in the term of trip-chaining, from leaving to returning home in one day. It is based on their complex activities in order to meet the needs of family and home care. While less than 60% of male’s mobility is outdoors, it is a simple trip-chaining or only has a single trip. The trip-chaining has significant differences between non-working women and working-men. This illustrates the pattern of Mom and Dad’s mobility in a family with an activity-based approach for the same purpose, i.e. family welfare. This study explains how complex the trip-chaining of non-working urban women and as housewives, with an activity-based approach done outdoors in a week. Socio-economic and household demographic variables serve as the basis for measuring the independent variables affecting family welfare, as well as the variables of type, time and duration of activities performed by unemployed housewives. This study aims to examine the interrelationships between activity variables, especially the time of activity and travel, and socio-economic of household variables that can generate the complexity of women’s daily travel. Discrete Choice Modeling developed by Ben-Akiva, Chandra Bhat, etc., is used in this study to illustrate the relationship between activity and socio-economic demographic variables based on primary survey data in Bandung, West Java for 466 unemployed housewives. The results of the regression, by

Vver-1000 Mox core computational benchmark

International Nuclear Information System (INIS)

2006-01-01

The NEA Nuclear Science Committee has established an Expert Group that deals with the status and trends of reactor physics, fuel performance and fuel cycle issues related to disposing of weapons-grade plutonium in mixed-oxide fuel. The objectives of the group are to provide NEA member countries with up-to-date information on, and to develop consensus regarding, core and fuel cycle issues associated with burning weapons-grade plutonium in thermal water reactors (PWR, BWR, VVER-1000, CANDU) and fast reactors (BN-600). These issues concern core physics, fuel performance and reliability, and the capability and flexibility of thermal water reactors and fast reactors to dispose of weapons-grade plutonium in standard fuel cycles. The activities of the NEA Expert Group on Reactor-based Plutonium Disposition are carried out in close co-operation (jointly, in most cases) with the NEA Working Party on Scientific Issues in Reactor Systems (WPRS). A prominent part of these activities include benchmark studies. At the time of preparation of this report, the following benchmarks were completed or in progress: VENUS-2 MOX Core Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); VVER-1000 LEU and MOX Benchmark (completed); KRITZ-2 Benchmarks: carried out jointly with the WPRS (formerly the WPPR) (completed); Hollow and Solid MOX Fuel Behaviour Benchmark (completed); PRIMO MOX Fuel Performance Benchmark (ongoing); VENUS-2 MOX-fuelled Reactor Dosimetry Calculation (ongoing); VVER-1000 In-core Self-powered Neutron Detector Calculational Benchmark (started); MOX Fuel Rod Behaviour in Fast Power Pulse Conditions (started); Benchmark on the VENUS Plutonium Recycling Experiments Configuration 7 (started). This report describes the detailed results of the benchmark investigating the physics of a whole VVER-1000 reactor core using two-thirds low-enriched uranium (LEU) and one-third MOX fuel. It contributes to the computer code certification process and to the

Understanding Social Learning Behaviors via a Virtual Field Trip

Directory of Open Access Journals (Sweden)

Xin Bai

2014-06-01

Full Text Available This is a multidisciplinary study investigating how a virtual rather than face-to-face field trip can be conducted in a real-world setting and how students respond to such a social learning opportunity. Our participants followed a story of a stroke patient at her virtual home and in a virtual hospital via a teaching vignette. They were then given a new case and got on a virtual trip via a multiuser virtual environment. They played the roles of patients, relatives, doctors, or nurses, experiencing the emotional, physical, or social impacts those stakeholders may go through. Our study finds the overall participation of the Virtual Group is 50% more than the Text Group. Although the Virtual Group generates much more nodes in total, they focused much less on knowledge sharing and comparing than the Text Group (46 vs. 67, but more on other higher-level aspects of social interactions, such as knowledge discovery (57 vs. 42, co-construction (66 vs. 39, testing and modification (58 vs. 24 and application of newly constructed meaning (60 vs. 16. Analysis of students’ virtual field activities and in-depth discussions of important issues implied are included to help understand social learning behaviors during a virtual field trip. Sustainability of such systems is discussed.

A simplified approach to detect undervoltage tripping of wind generators

Energy Technology Data Exchange (ETDEWEB)

Sigrist, Lukas; Rouco, Luis [Universidad Pontificia Comillas, Madrid (Spain). Inst. de Investigacion Tecnologica

2012-07-01

This paper proposes a simplified but fast approach based on a Norton equivalent of wind generators to detect undervoltage tripping of wind generators. This approach is successfully applied to a real wind farm. The relevant grid code requires the wind farm to withstand a voltage dip of 0% retained voltage. The ability of the wind generators to raise the voltage supplying reactive current and to avoid undervoltage tripping is investigated. The obtained results are also compared with the results obtained from detailed dynamic simulations, which make use of wind generator models complying with the relevant grid code. (orig.)

Wind turbine supply in Canada

International Nuclear Information System (INIS)

Snodin, H.

2007-01-01

This study reported on wind turbine supplies to the Canadian market. The report was written to address concerns for Canada's supply outlook in the near future due to the booming wind energy market. Turbine shortages have arisen as a result of continued growth in both European and North American markets. Long lead-times on turbine orders are now increasing the pressure to lock in turbine supply during the initial phases of the development process. Future growth of the wind energy industry will be impacted if turbine supply difficulties continue to contribute to uncertainties in the development process. The report provided an overview of the North American and global wind energy markets, as well as a summary of telephone interviews conducted with turbine suppliers. The implications for the future of turbine supply to the Canadian market were also analyzed. It was concluded that policy-makers should focus on supporting the expansion of manufacturing facilities for small wind turbines and control infrastructure in Canada 7 refs., 3 figs

Shielding benchmark problems

International Nuclear Information System (INIS)

Tanaka, Shun-ichi; Sasamoto, Nobuo; Oka, Yoshiaki; Kawai, Masayoshi; Nakazawa, Masaharu.

1978-09-01

Shielding benchmark problems were prepared by the Working Group of Assessment of Shielding Experiments in the Research Comittee on Shielding Design of the Atomic Energy Society of Japan, and compiled by the Shielding Laboratory of Japan Atomic Energy Research Institute. Twenty-one kinds of shielding benchmark problems are presented for evaluating the calculational algorithm and the accuracy of computer codes based on the discrete ordinates method and the Monte Carlo method and for evaluating the nuclear data used in the codes. (author)

Health Effect of Forest Bathing Trip on Elderly Patients with Chronic Obstructive Pulmonary Disease.

Science.gov (United States)

Jia, Bing Bing; Yang, Zhou Xin; Mao, Gen Xiang; Lyu, Yuan Dong; Wen, Xiao Lin; Xu, Wei Hong; Lyu, Xiao Ling; Cao, Yong Bao; Wang, Guo Fu

2016-03-01

Forest bathing trip is a short, leisurely visit to forest. In this study we determined the health effects of forest bathing trip on elderly patients with chronic obstructive pulmonary disease (COPD). The patients were randomly divided into two groups. One group was sent to forest, and the other was sent to an urban area as control. Flow cytometry, ELISA, and profile of mood states (POMS) evaluation were performed. In the forest group, we found a significant decrease of perforin and granzyme B expressions, accompanied by decreased levels of pro-inflammatory cytokines and stress hormones. Meanwhile, the scores in the negative subscales of POMS decreased after forest bathing trip. These results indicate that forest bathing trip has health effect on elderly COPD patients by reducing inflammation and stress level. Copyright © 2016 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

A neural networks based ``trip`` analysis system for PWR-type reactors; Um sistema de analise de ``trip`` em reatores PWR usando redes neuronais

Energy Technology Data Exchange (ETDEWEB)

Alves, Antonio Carlos Pinto Dias

1993-12-31

The analysis short after automatic shutdown (trip) of a PWR-type nuclear reactor takes a considerable amount of time, not only because of the great number of variables involved in transients, but also the various equipment that compose a reactor of this kind. On the other hand, the transients`inter-relationship, intended to the detection of the type of the accident is an arduous task, since some of these accidents (like loss of FEEDWATER and station BLACKOUT, for example), generate transients similar in behavior (as cold leg temperature and steam generators mixture levels, for example). Also, the sequence-of-events analysis is not always sufficient for correctly pin point the causes of the trip. (author) 11 refs., 39 figs.

A neural networks based ``trip`` analysis system for PWR-type reactors; Um sistema de analise de ``trip`` em reatores PWR usando redes neuronais

Energy Technology Data Exchange (ETDEWEB)

Alves, Antonio Carlos Pinto Dias

1994-12-31

The analysis short after automatic shutdown (trip) of a PWR-type nuclear reactor takes a considerable amount of time, not only because of the great number of variables involved in transients, but also the various equipment that compose a reactor of this kind. On the other hand, the transients`inter-relationship, intended to the detection of the type of the accident is an arduous task, since some of these accidents (like loss of FEEDWATER and station BLACKOUT, for example), generate transients similar in behavior (as cold leg temperature and steam generators mixture levels, for example). Also, the sequence-of-events analysis is not always sufficient for correctly pin point the causes of the trip. (author) 11 refs., 39 figs.

50 CFR 660.332 - Open access daily trip limit (DTL) fishery for sablefish.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Open access daily trip limit (DTL) fishery... COAST STATES West Coast Groundfish-Open Access Fisheries § 660.332 Open access daily trip limit (DTL) fishery for sablefish. (a) Open access DTL fisheries both north and south of 36° N. lat. Open access...

Studi Eksperimen Perbandingan Pengaruh Variasi Tekanan Inlet Turbin danVariasi Pembebanan Terhadap Karakteristik Turbin Pada Organic Rankine Cycle

Directory of Open Access Journals (Sweden)

Dwi Dharma Risqiawan

2013-12-01

Full Text Available Sistem pembangkit listrik telah berinovasi pada saat ini untuk tetap memenuhi kebutuhan akan ketersediaan listrik salah satunya dengan Organic Rankine Cycle (ORC. Sistem ini terdiri dari empat komponen utama yaitu evaporator, turbin, kondensor, dan pompa.Fluida kerja dipompa ke evaporator untuk membangkitkan uap lalu digunakan menggerakkan turbin.Uap hasil ekspansi turbin dikondensasi dan dialirkan oleh pompa kembali ke evaporator.Sistem ini mampu memanfaatkan sumber energi yang memiliki temperatur dan tekanan rendah untuk membangkitkan uap fluida organik. Penelitian ini dilakukan untuk mengevaluasi kinerja turbin pada sistem ORC dengan memvariasikan tekanan masuk turbin dan pembebanan dengan menggunakan R-123 sebagai fluida kerja .Pengambilan data dilakukan dengan memvariasikan tekanan masuk turbin pada setiap variasi pembebanan generator.Pengamatan dilakukan hanya pada turbin untuk mengetahui karakteristik turbin yang digunakan saat ini.Pengambilan data dilakukan dengan R-123 sebagai fluida kerja. Dari eksperimen didapatkan temperatur masuk dan keluar turbin,kecepatan putaran turbin dalam rpm, dan enthalpy dapat diketahui. Enthalpy digunakan untuk mengitung kerja yang dihasilkan turbin, efisiensi turbin dan efisiensi sudu turbin.Pada tekanan masuk turbin 8 bar dan beban 1000 Watt data dengan nilai terbaik didapatkan.Hasil perhitungan data didapatkan kerja yang dihasilkan turbin yang terbesar adalah 5,4 KW. Hasil lain yang dapat diketahui adalah efisiensi turbin tertinggi 88%. Efisiensi sudu turbin tertinggi yang terhitung adalah 42,9%.

Dynamic benchmarking of simulation codes

International Nuclear Information System (INIS)

Henry, R.E.; Paik, C.Y.; Hauser, G.M.

1996-01-01

Computer simulation of nuclear power plant response can be a full-scope control room simulator, an engineering simulator to represent the general behavior of the plant under normal and abnormal conditions, or the modeling of the plant response to conditions that would eventually lead to core damage. In any of these, the underlying foundation for their use in analysing situations, training of vendor/utility personnel, etc. is how well they represent what has been known from industrial experience, large integral experiments and separate effects tests. Typically, simulation codes are benchmarked with some of these; the level of agreement necessary being dependent upon the ultimate use of the simulation tool. However, these analytical models are computer codes, and as a result, the capabilities are continually enhanced, errors are corrected, new situations are imposed on the code that are outside of the original design basis, etc. Consequently, there is a continual need to assure that the benchmarks with important transients are preserved as the computer code evolves. Retention of this benchmarking capability is essential to develop trust in the computer code. Given the evolving world of computer codes, how is this retention of benchmarking capabilities accomplished? For the MAAP4 codes this capability is accomplished through a 'dynamic benchmarking' feature embedded in the source code. In particular, a set of dynamic benchmarks are included in the source code and these are exercised every time the archive codes are upgraded and distributed to the MAAP users. Three different types of dynamic benchmarks are used: plant transients; large integral experiments; and separate effects tests. Each of these is performed in a different manner. The first is accomplished by developing a parameter file for the plant modeled and an input deck to describe the sequence; i.e. the entire MAAP4 code is exercised. The pertinent plant data is included in the source code and the computer

Wind Turbine Generator System Power Performance Test Report for the ARE442 Wind Turbine

Energy Technology Data Exchange (ETDEWEB)

van Dam, J.; Jager, D.

2010-02-01

This report summarizes the results of a power performance test that NREL conducted on the ARE 442 wind turbine. This test was conducted in accordance with the International Electrotechnical Commission's (IEC) standard, Wind Turbine Generator Systems Part 12: Power Performance Measurements of Electricity Producing Wind Turbines, IEC 61400-12-1 Ed.1.0, 2005-12. However, because the ARE 442 is a small turbine as defined by IEC, NREL also followed Annex H that applies to small wind turbines. In these summary results, wind speed is normalized to sea-level air density.

Draft-circular on wind turbines. Concept-circulaire wind turbines

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

Criteria for providing licenses to build and operate a wind turbine are surveyed. Factors to consider are: characteristics of the landscape, density of population, town and country planning, environmental aspects (birds), safety and nuisance. National regulations for wind turbines will simplify licensing procedures and improve legal security.

Gait Characteristics Associated with Trip-Induced Falls on Level and Sloped Irregular Surfaces

Directory of Open Access Journals (Sweden)

Andrew Merryweather

2011-11-01

Full Text Available Same level falls continue to contribute to an alarming number of slip/trip/fall injuries in the mining workforce. The objective of this study was to investigate how walking on different surface types and transverse slopes influences gait parameters that may be associated with a trip event. Gait analysis was performed for ten subjects on two orientations (level and sloped on smooth, hard surface (control and irregular (gravel, larger rocks surfaces. Walking on irregular surfaces significantly increased toe clearance compared to walking on the smooth surface. There was a significant (p < 0.05 decrease in cadence (steps/min, stride length (m, and speed (m/s from control to gravel to larger rocks. Significant changes in external rotation and increased knee flexion while walking on irregular surfaces were observed. Toe and heel clearance requirements increased on irregular surfaces, which may provide an explanation for trip-induced falls; however, the gait alterations observed in the experienced workers used as subjects would likely improve stability and recovery from a trip.

Benchmarking von Krankenhausinformationssystemen – eine vergleichende Analyse deutschsprachiger Benchmarkingcluster

Directory of Open Access Journals (Sweden)

Jahn, Franziska

2015-08-01

Full Text Available Benchmarking is a method of strategic information management used by many hospitals today. During the last years, several benchmarking clusters have been established within the German-speaking countries. They support hospitals in comparing and positioning their information system’s and information management’s costs, performance and efficiency against other hospitals. In order to differentiate between these benchmarking clusters and to provide decision support in selecting an appropriate benchmarking cluster, a classification scheme is developed. The classification scheme observes both general conditions and examined contents of the benchmarking clusters. It is applied to seven benchmarking clusters which have been active in the German-speaking countries within the last years. Currently, performance benchmarking is the most frequent benchmarking type, whereas the observed benchmarking clusters differ in the number of benchmarking partners and their cooperation forms. The benchmarking clusters also deal with different benchmarking subjects. Assessing costs and quality application systems, physical data processing systems, organizational structures of information management and IT services processes are the most frequent benchmarking subjects. There is still potential for further activities within the benchmarking clusters to measure strategic and tactical information management, IT governance and quality of data and data-processing processes. Based on the classification scheme and the comparison of the benchmarking clusters, we derive general recommendations for benchmarking of hospital information systems.

Operational, control and protective system transient analyses of the closed-cycle GT-HTGR power plant

International Nuclear Information System (INIS)

Openshaw, F.L.; Chan, T.W.

1980-07-01

This paper presents a description of the analyses of the control/protective system preliminary designs for the gas turbine high-temperature gas-cooled reactor (GT-HTGR) power plant. The control system is designed to regulate reactor power, control electric load and turbine speed, control the temperature of the helium delivered to the turbines, and control thermal transients experienced by the system components. In addition, it provides the required control programming for startup, shutdown, load ramp, and other expected operations. The control system also handles conditions imposed on the system during upset and emergency conditions such as loop trip, reactor trip, or electrical load rejection

RF Trip and Beam Loss Diagnostics in LEP using GPS timing

CERN Document Server

Arnaudon, L; Beetham, G; Ciapala, Edmond; Juillard, J C; Olsen, R; CERN. Geneva. SPS and LEP Division

2000-01-01

A fast diagnostics system has been installed in LEP to allow precise time-stamping of RF unit trips. The system also monitors the fast decay of current when a beam loss occurs. From the information gathered it is now possible to determine which RF units have provoked a beam loss at high energy and which have tripped as a result. The system uses GPS equipment installed at all of the even points of LEP together with fast local DSP acquisition and event recording units in each RF sector. An overall control application driven by the LEPExec arms the system at the start of each fill, calculates and displays RF and trip beam loss events in sequence, then stores the results in a database. The system installation was completed in time for the LEP 2000 startup and initial problems were quickly resolved. Throughout the year it has proved invaluable for high energy running. The experience gained will also be very useful for similar diagnostics applications in LHC.

Medical school benchmarking - from tools to programmes.

Science.gov (United States)

Wilkinson, Tim J; Hudson, Judith N; Mccoll, Geoffrey J; Hu, Wendy C Y; Jolly, Brian C; Schuwirth, Lambert W T

2015-02-01

Benchmarking among medical schools is essential, but may result in unwanted effects. To apply a conceptual framework to selected benchmarking activities of medical schools. We present an analogy between the effects of assessment on student learning and the effects of benchmarking on medical school educational activities. A framework by which benchmarking can be evaluated was developed and applied to key current benchmarking activities in Australia and New Zealand. The analogy generated a conceptual framework that tested five questions to be considered in relation to benchmarking: what is the purpose? what are the attributes of value? what are the best tools to assess the attributes of value? what happens to the results? and, what is the likely "institutional impact" of the results? If the activities were compared against a blueprint of desirable medical graduate outcomes, notable omissions would emerge. Medical schools should benchmark their performance on a range of educational activities to ensure quality improvement and to assure stakeholders that standards are being met. Although benchmarking potentially has positive benefits, it could also result in perverse incentives with unforeseen and detrimental effects on learning if it is undertaken using only a few selected assessment tools.

Steam generators, turbines, and condensers. Volume six

International Nuclear Information System (INIS)

Anon.

1986-01-01

Volume six covers steam generators (How steam is generated, steam generation in a PWR, vertical U-tube steam generators, once-through steam generators, how much steam do steam generators make?), turbines (basic turbine principles, impulse turbines, reaction turbines, turbine stages, turbine arrangements, turbine steam flow, steam admission to turbines, turbine seals and supports, turbine oil system, generators), and condensers (need for condensers, basic condenser principles, condenser arrangements, heat transfer in condensers, air removal from condensers, circulating water system, heat loss to the circulating water system, factors affecting condenser performance, condenser auxiliaries)

Shielding Benchmark Computational Analysis

International Nuclear Information System (INIS)

Hunter, H.T.; Slater, C.O.; Holland, L.B.; Tracz, G.; Marshall, W.J.; Parsons, J.L.

2000-01-01

Over the past several decades, nuclear science has relied on experimental research to verify and validate information about shielding nuclear radiation for a variety of applications. These benchmarks are compared with results from computer code models and are useful for the development of more accurate cross-section libraries, computer code development of radiation transport modeling, and building accurate tests for miniature shielding mockups of new nuclear facilities. When documenting measurements, one must describe many parts of the experimental results to allow a complete computational analysis. Both old and new benchmark experiments, by any definition, must provide a sound basis for modeling more complex geometries required for quality assurance and cost savings in nuclear project development. Benchmarks may involve one or many materials and thicknesses, types of sources, and measurement techniques. In this paper the benchmark experiments of varying complexity are chosen to study the transport properties of some popular materials and thicknesses. These were analyzed using three-dimensional (3-D) models and continuous energy libraries of MCNP4B2, a Monte Carlo code developed at Los Alamos National Laboratory, New Mexico. A shielding benchmark library provided the experimental data and allowed a wide range of choices for source, geometry, and measurement data. The experimental data had often been used in previous analyses by reputable groups such as the Cross Section Evaluation Working Group (CSEWG) and the Organization for Economic Cooperation and Development/Nuclear Energy Agency Nuclear Science Committee (OECD/NEANSC)

Wind turbine operated sailboat

Energy Technology Data Exchange (ETDEWEB)

Hall, R.

1990-07-31

A wind powered boat is disclosed which incorporates a vertical axis rotary turbine. A shaft portion extends downwardly from the turbine to a water pump, with the boat being provided with a forwardly opening inlet and a rearwardly opening outlet from the water pump. When rotating, the turbine operates the pump by the shaft to draw in water through the inlet, thereby creating a low pressure area in front of the boat, and to force the water out through the outlet for propelling the boat. In a preferred embodiment, the boat has a catamaran construction or is a large ocean going vessel with enough width to provide a buffer to either side of the turbine, and the turbine is the Darrieus rotor type. The pump is a standard centrifugal type of pump. A self adjusting braking device for the turbine is also disclosed, which prevents over-rotation and is also capable of storing heat energy generated during braking. 4 figs.

CRM1-mediated nuclear export is required for 26 S proteasome-dependent degradation of the TRIP-Br2 proto-oncoprotein.

Science.gov (United States)

Cheong, Jit Kong; Gunaratnam, Lakshman; Hsu, Stephen I-Hong

2008-04-25

Overexpression of the proto-oncogene TRIP-Br2 (SERTAD2) has been shown to induce E2F activity and promote tumorigenesis, whereas ablation of TRIP-Br2 arrests cell proliferation. Timely degradation of many cell cycle regulators is fundamental to the maintenance of proper cell cycle progression. Here we report novel mechanism(s) that govern the tight regulation of TRIP-Br2 levels during cell cycle progression. TRIP-Br2 was observed to be a short-lived protein in which the expression level peaks at the G(1)/S boundary. TRIP-Br2 accumulated in cells treated with 26 S proteasome inhibitors. Co-immunoprecipitation studies revealed that TRIP-Br2 forms ubiquitin conjugates. In silico analysis identified a putative leucine-rich nuclear export signal (NES) motif that overlaps with the PHD-Bromo interaction domain in the acidic C-terminal transactivation domain (TAD) of TRIP-Br2. This NES motif is highly conserved in widely divergent species and in all TRIP-Br family members. TRIP-Br2 was shown to be stabilized in G(2)/M phase cells through nuclear entrapment, either by deletion of the acidic C-terminal TAD, which includes the NES motif, or by leptomycin B-mediated inhibition of the CRM1-dependent nuclear export machinery. Mutation of leucine residue 238 of this NES motif abolished the interaction between CRM1 and TRIP-Br2, as well as the nuclear export of TRIP-Br2 and its subsequent 26 S proteasome-dependent degradation. These data suggest that CRM1-mediated nuclear export may be required for the proper execution of ubiquitin-proteasome-dependent degradation of TRIP-Br2.

Report on safety related occurrences and reactor trips July 1, 1979 - December 31, 1979

International Nuclear Information System (INIS)

Olsson, S.; Andermo, L.

1980-01-01

This is a report on all reported safety related occurrences and reactor trips in Swedish nuclear power plants in operation during July 1 to December 31, 1979 inclusive. The facilities involved are Barsebaeck 1 and 2, Oskarshamn 1 and 2 and Ringhals 1 and 2. During this period of 6 months 76 safety related occurrences and 27 reactor trips have been reported to the Nuclear Power Inspectorate. It is to the greatest extent conventional components such as valves and pumps which bring about the safety related occurrences or occurrences leading to outages or power reductions. However, the component errors discovered in the safety related systems have not affected the function of their redundant system and other diverse systems have not been involved. Therefore the reactor safety has been satisfactory. The total number of reactor trips are normal. The average value for these 6 months is 4.5 trips/unit. Approximetely one half of the reactor trips happened at zero or very low power operation. The fact that even small deviations from prescribed operation result in an automatic and safe shut down of the reactor, does not always imply a conflict with operational availability. The greatest outages are caused by occurrences without safety significance. (author)

Issues in Benchmark Metric Selection

Science.gov (United States)

Crolotte, Alain

It is true that a metric can influence a benchmark but will esoteric metrics create more problems than they will solve? We answer this question affirmatively by examining the case of the TPC-D metric which used the much debated geometric mean for the single-stream test. We will show how a simple choice influenced the benchmark and its conduct and, to some extent, DBMS development. After examining other alternatives our conclusion is that the “real” measure for a decision-support benchmark is the arithmetic mean.

Benchmarking clinical photography services in the NHS.

Science.gov (United States)

Arbon, Giles

2015-01-01

Benchmarking is used in services across the National Health Service (NHS) using various benchmarking programs. Clinical photography services do not have a program in place and services have to rely on ad hoc surveys of other services. A trial benchmarking exercise was undertaken with 13 services in NHS Trusts. This highlights valuable data and comparisons that can be used to benchmark and improve services throughout the profession.

Effect of weather on pedestrian trip count and duration: City-scale evaluations using mobile phone application data.

Science.gov (United States)

Vanky, Anthony P; Verma, Santosh K; Courtney, Theodore K; Santi, Paolo; Ratti, Carlo

2017-12-01

We examined the association between meteorological (weather) conditions in a given locale and pedestrian trips frequency and duration, through the use of locative digital data. These associations were determined for seasonality, urban microclimate, and commuting. We analyzed GPS data from a broadly available activity tracking mobile phone application that automatically recorded 247,814 trips from 5432 unique users in Boston and 257,697 trips from 8256 users in San Francisco over a 50-week period. Generally, we observed increased air temperature and the presence of light cloud cover had a positive association with hourly trip frequency in both cities, regardless of seasonality. Temperature and weather conditions generally showed greater associations with weekend and discretionary travel, than with weekday and required travel. Weather conditions had minimal association with the duration of the trip, once the trip was initiated. The observed associations in some cases differed between the two cities. Our study illustrates the opportunity that emerging technology presents to study active transportation, and exposes new methods to wider consideration in preventive medicine.

Benchmarking Danish Industries

DEFF Research Database (Denmark)

Gammelgaard, Britta; Bentzen, Eric; Aagaard Andreassen, Mette

2003-01-01

compatible survey. The International Manufacturing Strategy Survey (IMSS) doesbring up the question of supply chain management, but unfortunately, we did not have access to thedatabase. Data from the members of the SCOR-model, in the form of benchmarked performance data,may exist, but are nonetheless...... not public. The survey is a cooperative project "Benchmarking DanishIndustries" with CIP/Aalborg University, the Danish Technological University, the DanishTechnological Institute and Copenhagen Business School as consortia partners. The project has beenfunded by the Danish Agency for Trade and Industry...

Potential health impact of wind turbines

International Nuclear Information System (INIS)

2010-05-01

In response to public health concerns about wind turbines, a study was conducted to review the scientific evidence on the potential health effects of wind turbines. Several research questions were examined, including scientific evidence on the potential health impacts of wind turbines; the relationship between wind turbine noise and health; the relationship between low frequency sound, infrasound and health; assessment of exposure to wind turbines; wind turbine health and safety hazards and Ontario wind turbine setbacks; community consultation prior to wind farm construction and data gaps and research needs. The study showed that although some people living near wind turbines reported symptoms such as dizziness, headaches, and sleep disturbance, the scientific evidence available to date does not demonstrate a direct causal link between wind turbine noise and adverse health effects. The sound level from wind turbines at common residential setbacks is not sufficient to cause hearing impairment or other direct health effects, although some people may find it annoying. 41 refs., 1 appendix.

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

International Nuclear Information System (INIS)

Ko, P; Kurosawa, S

2014-01-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

Science.gov (United States)

Ko, P.; Kurosawa, S.

2014-03-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine.

Cogeneration steam turbines from Siemens: New solutions

Science.gov (United States)

Kasilov, V. F.; Kholodkov, S. V.

2017-03-01

The Enhanced Platform system intended for the design and manufacture of Siemens AG turbines is presented. It combines organizational and production measures allowing the production of various types of steam-turbine units with a power of up to 250 MWel from standard components. The Enhanced Platform designs feature higher efficiency, improved reliability, better flexibility, longer overhaul intervals, and lower production costs. The design features of SST-700 and SST-900 steam turbines are outlined. The SST-700 turbine is used in backpressure steam-turbine units (STU) or as a high-pressure cylinder in a two-cylinder condensing turbine with steam reheat. The design of an SST-700 single-cylinder turbine with a casing without horizontal split featuring better flexibility of the turbine unit is presented. An SST-900 turbine can be used as a combined IP and LP cylinder (IPLPC) in steam-turbine or combined-cycle power units with steam reheat. The arrangements of a turbine unit based on a combination of SST-700 and SST-900 turbines or SST-500 and SST-800 turbines are presented. Examples of this combination include, respectively, PGU-410 combinedcycle units (CCU) with a condensing turbine and PGU-420 CCUs with a cogeneration turbine. The main equipment items of a PGU-410 CCU comprise an SGT5-4000F gas-turbine unit (GTU) and STU consisting of SST-700 and SST-900RH steam turbines. The steam-turbine section of a PGU-420 cogeneration power unit has a single-shaft turbine unit with two SST-800 turbines and one SST-500 turbine giving a power output of N el. STU = 150 MW under condensing conditions.

Integration of an Inter Turbine Burner to a Jet Turbine Engine

Science.gov (United States)

2013-03-01

Technology AFRL = Air Force Research Laboratory EGV = Exit Guide Vane HPT = High-Pressure Turbine ID = Inner Diameter IGV = Inlet Guide Vane...been able to show computationally that the compressor exit guide vane (EGV) and the turbine inlet guide vane ( IGV ) could be combined into a single...turbine engine hot section. The red slashed out sections are, from left to right, the compressor exit vane, HPT IGV , and the stator between the HPT and

Effects of RCP trip when recovering HPSI during LOCA in a Westinghouse PWR

Energy Technology Data Exchange (ETDEWEB)

Montero-Mayorga, Javier, E-mail: fj.montero@alumnos.upm.es; Queral, César; Rivas-Lewicky, Julio; González-Cadelo, Juan

2014-12-15

Highlights: • If HPSI is recovered during SBLOCA and RCPs are tripped core damage can be reached. • If the RCPs are tripped once the accumulators have injected the damage can be avoided. • If only 2 out of 3 RCPs are tripped the damage can be also avoided. • Improvements are proposed to the EOPs in order to avoid possible damage. - Abstract: Current Westinghouse Emergency Operating Procedures (EOPs) indicate initially that the operator must keep the reactor coolant pumps (RCPs) running during a Small Break Loss of Coolant Accident (SBLOCA) if there is unavailability of high pressure safety injection (HPSI) system in order to cool the core by forced convection. However, the crew must follow different EOPs along the transient depending on its evolution. In these EOPs there are several conditions which indicate the necessity of tripping one or more RCPs when HPSI is recovered. In this paper the occurrence of a SBLOCA with unavailability of HPSI has been analyzed with a model of Almaraz Nuclear Power Plant (Westinghouse 3 Loop) for TRACE code V5.0 patch 1. Two different approaches have been considered: the first one, taking into account Optimal Recovery Guidelines (ORGs) and in the second approach, the transition to Function Restoration Guidelines (FRGs) due to inadequate core cooling (ICC) conditions is considered. Results of this paper lead to the implementation of an improvement in current EOPs regarding how many RCPs should be tripped during SBLOCA sequences.

Turbine and its turbine control system of full scope simulator for Qinshan 300 MW Nuclear Power Unit

International Nuclear Information System (INIS)

Zhang Dongwei; Zhu Jinping

1996-01-01

The simulation for Qinshan 300 MW Nuclear Power Unit turbine and turbine control system is briefly introduced. The simulation system includes lube oil system, jacking oil pump system, turning gear system, turbine supervisor system and turbine control system. It not only correctly simulates the process of turbine normal start up, operation, and shut down, but also the response of turbine under the malfunction conditions

Benchmarking of human resources management

Directory of Open Access Journals (Sweden)

David M. Akinnusi

2008-11-01

Full Text Available This paper reviews the role of human resource management (HRM which, today, plays a strategic partnership role in management. The focus of the paper is on HRM in the public sector, where much hope rests on HRM as a means of transforming the public service and achieving much needed service delivery. However, a critical evaluation of HRM practices in the public sector reveals that these services leave much to be desired. The paper suggests the adoption of benchmarking as a process to revamp HRM in the public sector so that it is able to deliver on its promises. It describes the nature and process of benchmarking and highlights the inherent difficulties in applying benchmarking in HRM. It concludes with some suggestions for a plan of action. The process of identifying “best” practices in HRM requires the best collaborative efforts of HRM practitioners and academicians. If used creatively, benchmarking has the potential to bring about radical and positive changes in HRM in the public sector. The adoption of the benchmarking process is, in itself, a litmus test of the extent to which HRM in the public sector has grown professionally.

Integrating Best Practice and Performance Indicators To Benchmark the Performance of a School System. Benchmarking Paper 940317.

Science.gov (United States)

Cuttance, Peter

This paper provides a synthesis of the literature on the role of benchmarking, with a focus on its use in the public sector. Benchmarking is discussed in the context of quality systems, of which it is an important component. The paper describes the basic types of benchmarking, pertinent research about its application in the public sector, the…

Benchmarking and Sustainable Transport Policy

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Wyatt, Andrew; Gordon, Lucy

2004-01-01

Order to learn from the best. In 2000 the European Commission initiated research to explore benchmarking as a tool to promote policies for ‘sustainable transport’. This paper reports findings and recommendations on how to address this challenge. The findings suggest that benchmarking is a valuable...... tool that may indeed help to move forward the transport policy agenda. However, there are major conditions and limitations. First of all it is not always so straightforward to delimit, measure and compare transport services in order to establish a clear benchmark. Secondly ‘sustainable transport......’ evokes a broad range of concerns that are hard to address fully at the level of specific practices. Thirdly policies are not directly comparable across space and context. For these reasons attempting to benchmark ‘sustainable transport policies’ against one another would be a highly complex task, which...

The Development of a Fault Tree Model for Balance of Plant System

International Nuclear Information System (INIS)

Hwang, Mee Jeong; Park, Jin Hee; Lim, Ho Gon

2011-01-01

In this paper, we propose a fault tree modeling method for BOP (balance of plant) system to develop a combined risk model and trip model, and the application plans of the developed model. Where, the trip means the reactor trip and turbine and generator trip. We have usually modeled the safety-related systems and their supporting systems to assess the risk analysis of a nuclear power plant. However, the BOP system.s condition change induces the risk change. That is, the BOP system.s condition is relevant to plants. performance and affects to the plant risk. The existing model for BOP systems is a simplified system model or SPV (Single-point vulnerability) evaluation model. However, these models are not effective enough to use for the plant's performance evaluation. Also, lately an integrated decision-making framework is required for risk-informed applications. The methods for monitoring the performance of a nuclear power plant differ from the purpose. For example, MSPI (mitigating system performance index) and MR (maintenance rule) use different methods and indexes to monitor the performance. Therefore, for consistent decision-making, it is necessary to develop a risk assessment model including a systems model inducing reactor trip. The system.s model inducing reactor trip and turbine/generator trip is defined as the 'trip model'

Mechanical (turbines and auxiliary equipment)

CERN Document Server

Sherry, A; Cruddace, AE

2013-01-01

Modern Power Station Practice, Volume 3: Mechanical (Turbines and Auxiliary Equipment) focuses on the development of turbines and auxiliary equipment used in power stations in Great Britain. Topics covered include thermodynamics and steam turbine theory; turbine auxiliary systems such as lubrication systems, feed water heating systems, and the condenser and cooling water plants. Miscellaneous station services, and pipework in power plants are also described. This book is comprised of five chapters and begins with an overview of thermodynamics and steam turbine theory, paying particular attenti

Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

Energy Technology Data Exchange (ETDEWEB)

Foust, J. [Voith Hydro, Inc., York, PA (USA); Hecker, G. [Alden Research Laboratory, Inc., Holden, MA (USA); Li, S. [Alden Research Laboratory, Inc., Holden, MA (USA); Allen, G. [Alden Research Laboratory, Inc., Holden, MA (USA)

2011-10-01

The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), the design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall

Mechanisms influencing student understanding on an outdoor guided field trip

Science.gov (United States)

Caskey, Nourah Al-Rashid

Field trips are a basic and important, yet often overlooked part of the student experience. They provide the opportunity to integrate real world knowledge with classroom learning and student previous personal experiences. Outdoor guided field trips leave students with an increased understanding, awareness and interest and in science. However, the benefits of this experience are ambiguous at best (Falk and Balling, 1982; Falk and Dierking, 1992; Kisiel, 2006.) Students on an outdoor guided field trip to a local nature park experienced a significant increase in their understanding of the rock cycle. The changes in the pre-field trip test and the post-field trip test as well as their answers in interviews showed a profound change in the students' understanding and in their interest in the subject matter. The use of the "student's voice" (Bamberger and Tal, 2008) was the motivation for data analysis. By using the students' voice, I was able to determine the mechanisms that might influence their understanding of a subject. The central concepts emerging from the data were: the outdoor setting; the students' interest; the social interaction. From these central concepts, a conceptual model was developed. The outdoor setting allows for the freedom to explore, touch, smell and movement. This, in turn, leads to an increased interest in subject matter. As the students are exploring, they are enjoying themselves and become more open to learning. Interest leads to a desire to learn (Dewey, 1975). In addition to allowing the freedom to explore and move, the outdoor setting creates the condition for social interaction. The students talk to each other as they walk; they have in-depth discourse regarding the subject matter---with the teachers, each other and with the guides. The guides have an extremely important role in the students' learning. The more successful guides not only act as experts, but also adjust to the students' needs and act or speak accordingly. The

Advanced LP turbine blade design

International Nuclear Information System (INIS)

Jansen, M.; Pfeiffer, R.; Termuehlen, H.

1990-01-01

In the 1960's and early 1970's, the development of steam turbines for the utility industry was mainly influenced by the demand for increasing unit sizes. Nuclear plants in particular, required the design of LP turbines with large annulus areas for substantial mass and volumetric steam flows. Since then the development of more efficient LP turbines became an ongoing challenge. Extensive R and D work was performed in order to build efficient and reliable LP turbines often exposed to severe corrosion, erosion and dynamic excitation conditions. This task led to the introduction of an advanced disk-type rotor design for 1800 rpm LP turbines and the application of a more efficient, reaction-type blading for all steam turbine sections including the first stages of LP turbines. The most recent developments have resulted in an advanced design of large LP turbine blading, typically used in the last three stages of each LP turbine flow section. Development of such blading required detailed knowledge of the three dimensional, largely transonic, flow conditions of saturated steam. Also the precise assessment of blade stressing from dynamic conditions, such as speed and torsional resonance, as well as stochastic and aerodynamic excitation is of extreme importance

Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions

International Nuclear Information System (INIS)

Choi, K.S.; Liu, W.N.; Sun, X.; Khaleel, M.A.

2009-01-01

We study the ultimate ductility and failure modes of a commercial transformation-induced plasticity (TRIP) 800 steel under different loading conditions with an advanced microstructure-based finite-element analysis. The representative volume element (RVE) for the TRIP 800 under examination is developed based on an actual microstructure obtained from scanning electron microscopy. The ductile failure of the TRIP 800 under different loading conditions is predicted in the form of plastic strain localization without any prescribed failure criteria for the individual phases. This indicates that the microstructure-level inhomogeneity of the various constituent phases can be the key factor influencing the final ductility of the TRIP 800 steel under different loading conditions. Comparisons of the computational results with experimental measurements suggest that the microstructure-based modeling approach accurately captures the overall macroscopic behavior of the TRIP 800 steel under different loading and boundary conditions.

Effect of power oscillations on suppression pool heating during ATWS [Anticipated Transients Without Scram] conditions

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Mallen, A.N.

1990-01-01

Nine selected Anticipated Transients Without Scram (ATWS) have been simulated on the BNL Engineering Plant Analyzer (EPA), to determine how power and flow oscillations, similar to those that did or could have occurred at the LaSalle-2 boiling Water Reactor (BWR), could affect the rate of Pressure Suppression Pool heating. It has been determined that the pool can reach its temperature limit of 80 degree C in 4.3 min. after Turbine Trip without Bypass, if the feedwater pumps are not tripped. The pool will not reach its limit, if Boron is injected, even when oscillations are encountered. Simultaneous turbine and recirculation pump trips, introduced under stable conditions, can lead to instability. 2 refs., 17 figs., 9 tabs

Great expectations: large wind turbines

International Nuclear Information System (INIS)

De Vries, E.

2001-01-01

This article focuses on wind turbine product development, and traces the background to wind turbines from the first generation 1.5 MW machines in 1995-6, plans for the second generation 3-5 MW class turbines to meet the expected boom in offshore wind projects, to the anticipated installation of a 4.5 MW turbine, and offshore wind projects planned for 2000-2002. The switch by the market leader Vestas to variable speed operation in 2000, the new product development and marketing strategy taken by the German Pro + Pro consultancy in their design of a 1.5 MW variable speed pitch control concept, the possible limiting of the size of turbines due to logistical difficulties, opportunities offered by air ships for large turbines, and the commissioning of offshore wind farms are discussed. Details of some 2-5 MW offshore wind turbine design specifications are tabulated

The Compensation Act 2006 and School Trips

Science.gov (United States)

Hunter-Jones, John

2006-01-01

The Compensation Act 2006 received its Royal Assent on 25 July 2006. The Act allows the courts to have regard to the social utility of "desirable activities", including school trips, in considering negligence claims. The article reviews the law of negligence as it affects teachers of the very young and considers the possible impact of…

Benchmarking of wind farm scale wake models in the EERA - DTOC project

DEFF Research Database (Denmark)

Réthoré, Pierre-Elouan; Hansen, Kurt Schaldemose; Barthelmie, R.J.

2013-01-01

-flow to combine wind farm (micro) and cluster (meso) scale wake models. For this purpose, a benchmark campaign is organized on the existing wind farm wake models available within the project, in order to identify which model would be the most appropriate for this coupling. A number of standardized wake cases......Designing offshore wind farms next to existing or planned wind farm clusters has recently become a common practice in the North Sea. These types of projects face unprecedented challenges in term of wind energy siting. The currently ongoing European project FP7 EERA - DTOC (Design Tool for Offshore...... wind farm Clusters) is aiming at providing a new type of model work-flow to address this issue. The wake modeling part of the EERA - DTOC project is to improve the fundamental understanding of wind turbine wakes and modeling. One of these challenges is to create a new kind of wake modeling work...

Experimental benchmark and code validation for airfoils equipped with passive vortex generators

International Nuclear Information System (INIS)

Baldacchino, D; Ferreira, C; Florentie, L; Timmer, N; Van Zuijlen, A; Manolesos, M; Chaviaropoulos, T; Diakakis, K; Papadakis, G; Voutsinas, S; González Salcedo, Á; Aparicio, M; García, N R.; Sørensen, N N.; Troldborg, N

2016-01-01

Experimental results and complimentary computations for airfoils with vortex generators are compared in this paper, as part of an effort within the AVATAR project to develop tools for wind turbine blade control devices. Measurements from two airfoils equipped with passive vortex generators, a 30% thick DU97W300 and an 18% thick NTUA T18 have been used for benchmarking several simulation tools. These tools span low-to-high complexity, ranging from engineering-level integral boundary layer tools to fully-resolved computational fluid dynamics codes. Results indicate that with appropriate calibration, engineering-type tools can capture the effects of vortex generators and outperform more complex tools. Fully resolved CFD comes at a much higher computational cost and does not necessarily capture the increased lift due to the VGs. However, in lieu of the limited experimental data available for calibration, high fidelity tools are still required for assessing the effect of vortex generators on airfoil performance. (paper)

Benchmarking for Cost Improvement. Final report

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The US Department of Energy`s (DOE) Office of Environmental Restoration and Waste Management (EM) conducted the Benchmarking for Cost Improvement initiative with three objectives: Pilot test benchmarking as an EM cost improvement tool; identify areas for cost improvement and recommend actions to address these areas; provide a framework for future cost improvement. The benchmarking initiative featured the use of four principal methods (program classification, nationwide cost improvement survey, paired cost comparison and component benchmarking). Interested parties contributed during both the design and execution phases. The benchmarking initiative was conducted on an accelerated basis. Of necessity, it considered only a limited set of data that may not be fully representative of the diverse and complex conditions found at the many DOE installations. The initiative generated preliminary data about cost differences and it found a high degree of convergence on several issues. Based on this convergence, the report recommends cost improvement strategies and actions. This report describes the steps taken as part of the benchmarking initiative and discusses the findings and recommended actions for achieving cost improvement. The results and summary recommendations, reported below, are organized by the study objectives.

Benchmarking for controllere: metoder, teknikker og muligheder

DEFF Research Database (Denmark)

Bukh, Per Nikolaj; Sandalgaard, Niels Erik; Dietrichson, Lars Grubbe

2008-01-01

Benchmarking indgår på mange måder i både private og offentlige virksomheders ledelsespraksis. I økonomistyring anvendes benchmark-baserede indikatorer (eller nøgletal), eksempelvis ved fastlæggelse af mål i resultatkontrakter eller for at angive det ønskede niveau for visse nøgletal i et Balanced...... Scorecard eller tilsvarende målstyringsmodeller. Artiklen redegør for begrebet benchmarking ved at præsentere og diskutere forskellige facetter af det, samt redegør for fire forskellige anvendelser af benchmarking for at vise begrebets bredde og væsentligheden af at klarlægge formålet med et...... benchmarkingprojekt. Dernæst bliver forskellen på resultatbenchmarking og procesbenchmarking behandlet, hvorefter brugen af intern hhv. ekstern benchmarking, samt brugen af benchmarking i budgetlægning og budgetopfølgning, behandles....

Optimizing the number and locations of turbines in a wind farm addressing energy-noise trade-off: A hybrid approach

International Nuclear Information System (INIS)

Mittal, Prateek; Mitra, Kishalay; Kulkarni, Kedar

2017-01-01

Highlights: • Concurrent resolution of turbine number and locations during micro-siting. • Effect of noise on energy-noise multi-objective optimization is demonstrated. • A hybrid algorithm is proposed utilizing probabilistic and deterministic methods. • ∼24% improved performance is achieved over the benchmark case study. • ∼29% enhanced efficiency over real-binary genetic algorithm alone can be observed. - Abstract: Micro-siting is an optimal way of placing turbines inside a wind farm while considering various design objectives and constraints. Using a well-established Jensen wake model and ISO-9613-2 noise calculation, this study performs a wind farm layout optimization based on a multi-objective trade-off between minimization of the noise propagation and maximization of the energy generation. A novel hybrid methodology is developed which is a combination of probabilistic real-binary coded multi-objective evolutionary algorithm and a newly proposed deterministic gradient based non-dominated normalized normal constraint method. Based on the Inverted Generational Distance metric, the performance of the proposed method is found to be better than the conventional normalized normal constraint method or the concerned evolutionary method alone. Moreover, in contrast to the previous studies, the generated non-dominated front is capable of providing a trade-off between various alternative energy-noise solutions, along with an additional information about the corresponding turbine numbers and their optimal location coordinates. As a result, the decision maker can choose from different competing wind turbine layouts based on existing noise and other standard regulations.

Investigations on human error hazards in recent unintended trip events of Korean nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Sa Kil; Jang, Tong Il; Lee, Yong Hee; Shin, Kwang Hyeon [KAERI, Daejeon (Korea, Republic of)

2012-10-15

According to the Operational Performance Information System (OPIS) which has been operated to improve the public understanding by the KINS (Korea Institute of Nuclear Safety), unintended trip events by mainly human errors counted up to 38 cases (18.7%) from 2000 to 2011. Although the Nuclear Power Plant (NPP) industry in Korea has been making efforts to reduce the human errors which have largely contributed to trip events, the human error rate might keep increasing. Interestingly, digital based I and C systems is the one of the reduction factors of unintended reactor trips. Human errors, however, have occurred due to the digital based I and C systems because those systems require new or changed behaviors to the NPP operators. Therefore, it is necessary that the investigations of human errors consider a new methodology to find not only tangible behavior but also intangible behavior such as organizational behaviors. In this study we investigated human errors to find latent factors such as decisions and conditions in the all of the unintended reactor trip events during last dozen years. To find them, we applied the HFACS (Human Factors Analysis and Classification System) which is a commonly utilized tool for investigating human contributions to aviation accidents under a widespread evaluation scheme. The objective of this study is to find latent factors behind of human errors in nuclear reactor trip events. Therefore, a method to investigate unintended trip events by human errors and the results will be discussed in more detail.

Investigations on human error hazards in recent unintended trip events of Korean nuclear power plants

International Nuclear Information System (INIS)

Kim, Sa Kil; Jang, Tong Il; Lee, Yong Hee; Shin, Kwang Hyeon

2012-01-01

According to the Operational Performance Information System (OPIS) which has been operated to improve the public understanding by the KINS (Korea Institute of Nuclear Safety), unintended trip events by mainly human errors counted up to 38 cases (18.7%) from 2000 to 2011. Although the Nuclear Power Plant (NPP) industry in Korea has been making efforts to reduce the human errors which have largely contributed to trip events, the human error rate might keep increasing. Interestingly, digital based I and C systems is the one of the reduction factors of unintended reactor trips. Human errors, however, have occurred due to the digital based I and C systems because those systems require new or changed behaviors to the NPP operators. Therefore, it is necessary that the investigations of human errors consider a new methodology to find not only tangible behavior but also intangible behavior such as organizational behaviors. In this study we investigated human errors to find latent factors such as decisions and conditions in the all of the unintended reactor trip events during last dozen years. To find them, we applied the HFACS (Human Factors Analysis and Classification System) which is a commonly utilized tool for investigating human contributions to aviation accidents under a widespread evaluation scheme. The objective of this study is to find latent factors behind of human errors in nuclear reactor trip events. Therefore, a method to investigate unintended trip events by human errors and the results will be discussed in more detail

Analysis of the equilibrium trip cost accounting for the fuel cost in a single-lane traffic system without late arrival

Science.gov (United States)

Tang, Tie-Qiao; Wang, Tao; Chen, Liang; Huang, Hai-Jun

2018-01-01

In this paper, we introduce the fuel cost into each commuter's trip cost, define a new trip cost without late arrival and its corresponding equilibrium state, and use a car-following model to explore the impacts of the fuel cost on each commuter's departure time, departure interval, arrival time, arrival interval, traveling time, early arrival time and trip cost at the above equilibrium state. The numerical results show that considering the fuel cost in each commuter's trip cost has positive impacts on his trip cost and fuel cost, and the traffic situation in the system without late arrival, i.e., each commuter should explicitly consider the fuel cost in his trip cost.

Comparison of the lifting-line free vortex wake method and the blade-element-momentum theory regarding the simulated loads of multi-MW wind turbines

International Nuclear Information System (INIS)

Hauptmann, S; Bülk, M; Cheng, P W; Schön, L; Erbslöh, S; Boorsma, K; Grasso, F; Kühn, M

2014-01-01

Design load simulations for wind turbines are traditionally based on the blade- element-momentum theory (BEM). The BEM approach is derived from a simplified representation of the rotor aerodynamics and several semi-empirical correction models. A more sophisticated approach to account for the complex flow phenomena on wind turbine rotors can be found in the lifting-line free vortex wake method. This approach is based on a more physics based representation, especially for global flow effects. This theory relies on empirical correction models only for the local flow effects, which are associated with the boundary layer of the rotor blades. In this paper the lifting-line free vortex wake method is compared to a state- of-the-art BEM formulation with regard to aerodynamic and aeroelastic load simulations of the 5MW UpWind reference wind turbine. Different aerodynamic load situations as well as standardised design load cases that are sensitive to the aeroelastic modelling are evaluated in detail. This benchmark makes use of the AeroModule developed by ECN, which has been coupled to the multibody simulation code SIMPACK

Comparison of the lifting-line free vortex wake method and the blade-element-momentum theory regarding the simulated loads of multi-MW wind turbines

Science.gov (United States)

Hauptmann, S.; Bülk, M.; Schön, L.; Erbslöh, S.; Boorsma, K.; Grasso, F.; Kühn, M.; Cheng, P. W.

2014-12-01

Design load simulations for wind turbines are traditionally based on the blade- element-momentum theory (BEM). The BEM approach is derived from a simplified representation of the rotor aerodynamics and several semi-empirical correction models. A more sophisticated approach to account for the complex flow phenomena on wind turbine rotors can be found in the lifting-line free vortex wake method. This approach is based on a more physics based representation, especially for global flow effects. This theory relies on empirical correction models only for the local flow effects, which are associated with the boundary layer of the rotor blades. In this paper the lifting-line free vortex wake method is compared to a state- of-the-art BEM formulation with regard to aerodynamic and aeroelastic load simulations of the 5MW UpWind reference wind turbine. Different aerodynamic load situations as well as standardised design load cases that are sensitive to the aeroelastic modelling are evaluated in detail. This benchmark makes use of the AeroModule developed by ECN, which has been coupled to the multibody simulation code SIMPACK.

Variable geometry gas turbines for improving the part-load performance of marine combined cycles - Gas turbine performance

DEFF Research Database (Denmark)

Haglind, Fredrik

2010-01-01

The part-load performance of gas and steam turbine combined cycles intended for naval use is of great importance, and it is influenced by the gas turbine configuration and load control strategy. This paper is aimed at quantifying the effects of variable geometry on the gas turbine part...... of various components within gas turbines. Two different gas turbine configurations are studied, a two-shaft aero-derivative configuration and a single-shaft industrial configuration. When both gas turbine configurations are running in part-load using fuel flow control, the results indicate better part......-load performance for the two-shaft gas turbine. Reducing the load this way is accompanied by a much larger decrease in exhaust gas temperature for the single-shaft gas turbine than for the two-shaft configuration. As used here, the results suggest that variable geometry generally deteriorates the gas turbine part...

Numerical study on effect of boundary layer trips on aerodynamic performance of E216 airfoil

Directory of Open Access Journals (Sweden)

B.K. Sreejith

2018-02-01

Full Text Available Simulation is carried out to find the performance of airfoil E216 using Transition γ-Reθ model at Reynolds number of 100,000. Flow behaviour and effect of angle of attack (AOA on laminar separation bubble (LSB formation are examined. The results are validated with wind tunnel experimental results. LSB formation is clearly spotted in the velocity vector plot and coefficient of pressure distribution over airfoil. LSB moved upstream towards the leading edge with increase in AOA. Effect of boundary layer trip on LSB formation over the airfoil and performance of airfoil are studied. Two different trip locations, 17% of chord and 10% of chord from leading edge, and different trip heights (0.3 mm, 0.5 mm, 0.7 mm, 1 mm are investigated in this study. Results showed that boundary layer trip could eliminate LSB partially or completely and improve aerodynamic performance of the airfoil. Maximum improvement in drag by 15.48% and lift to drag ratio by 21.62% are obtained at angle of attack of 60. In all the cases, improvement in performance is observed only up to trip height of 0.5 mm.

Professional Performance and Bureaucratic Benchmarking Information

DEFF Research Database (Denmark)

Schneider, Melanie L.; Mahlendorf, Matthias D.; Schäffer, Utz

Prior research documents positive effects of benchmarking information provision on performance and attributes this to social comparisons. However, the effects on professional recipients are unclear. Studies of professional control indicate that professional recipients often resist bureaucratic...... controls because of organizational-professional conflicts. We therefore analyze the association between bureaucratic benchmarking information provision and professional performance and suggest that the association is more positive if prior professional performance was low. We test our hypotheses based...... on archival, publicly disclosed, professional performance data for 191 German orthopedics departments, matched with survey data on bureaucratic benchmarking information given to chief orthopedists by the administration. We find a positive association between bureaucratic benchmarking information provision...

WTO ministerial conference adopts declaration on TRIPS and public health.

Science.gov (United States)

Elliott, Richard

2002-03-01

In November 2001, the 4th Ministerial Conference of the World Trade Organization adopted a Ministerial Declaration on public health and the WTO's Agreement on Trade-Related Aspects of Intellectual Property Rights (the "TRIPS Agreement"). The declaration represents a modest advance in addressing concerns that strict patent laws, and threats of trade sanctions, will be a barrier to most of the world's people with HIV/AIDS accessing affordable medicines. The full significance of the declaration remains to be seen, as it depends on what political impact it has at the WTO and on its member countries, and what legal impact it will have in the interpretation of the TRIPS Agreement.

Graphene in turbine blades

Science.gov (United States)

Das, D. K.; Swain, P. K.; Sahoo, S.

2016-07-01

Graphene, the two-dimensional (2D) nanomaterial, draws interest of several researchers due to its many superior properties. It has extensive applications in numerous fields. A turbine is a hydraulic machine which extracts energy from a fluid and converts it into useful work. Recently, Gudukeya and Madanhire have tried to increase the efficiency of Pelton turbine. Beucher et al. have also tried the same by reducing friction between fluid and turbine blades. In this paper, we study the advantages of using graphene as a coating on Pelton turbine blades. It is found that the efficiency of turbines increases, running and maintenance cost is reduced with more power output. By the application of graphene in pipes, cavitation will be reduced, durability of pipes will increase, operation and maintenance cost of water power plants will be less.

Modelling mode choice in short trips - shifting from car to bicycle

DEFF Research Database (Denmark)

Halldórsdóttir, Katrín; Christensen, Linda; Jensen, Thomas Christian

2011-01-01

-economic variables of a representative sample of the population. The investigated sample includes 11,072 observations. The model considers five alternatives (i.e., car driver, car passenger, public transport, walk and obviously bike), for which level of service variables are calculated through assignment procedures...... relevance of the cost for short trips. Expectedly, the selection of bicycle as mode for short trips is positively related to owning a bicycle and negatively linked to owning one or more cars. Urban density has also positive correlation with the selection of sustainable transport modes....

Combined Turbine and Cycle Optimization for Organic Rankine Cycle Power Systems—Part A: Turbine Model

Directory of Open Access Journals (Sweden)

Andrea Meroni

2016-04-01

Full Text Available Axial-flow turbines represent a well-established technology for a wide variety of power generation systems. Compactness, flexibility, reliability and high efficiency have been key factors for the extensive use of axial turbines in conventional power plants and, in the last decades, in organic Rankine cycle power systems. In this two-part paper, an overall cycle model and a model of an axial turbine were combined in order to provide a comprehensive preliminary design of the organic Rankine cycle unit, taking into account both cycle and turbine optimal designs. Part A presents the preliminary turbine design model, the details of the validation and a sensitivity analysis on the main parameters, in order to minimize the number of decision variables in the subsequent turbine design optimization. Part B analyzes the application of the combined turbine and cycle designs on a selected case study, which was performed in order to show the advantages of the adopted methodology. Part A presents a one-dimensional turbine model and the results of the validation using two experimental test cases from literature. The first case is a subsonic turbine operated with air and investigated at the University of Hannover. The second case is a small, supersonic turbine operated with an organic fluid and investigated by Verneau. In the first case, the results of the turbine model are also compared to those obtained using computational fluid dynamics simulations. The results of the validation suggest that the model can predict values of efficiency within ± 1.3%-points, which is in agreement with the reliability of classic turbine loss models such as the Craig and Cox correlations used in the present study. Values similar to computational fluid dynamics simulations at the midspan were obtained in the first case of validation. Discrepancy below 12 % was obtained in the estimation of the flow velocities and turbine geometry. The values are considered to be within a

EPA's Benchmark Dose Modeling Software

Science.gov (United States)

The EPA developed the Benchmark Dose Software (BMDS) as a tool to help Agency risk assessors facilitate applying benchmark dose (BMD) method’s to EPA’s human health risk assessment (HHRA) documents. The application of BMD methods overcomes many well know limitations ...

Accelerator shielding benchmark problems

International Nuclear Information System (INIS)

Hirayama, H.; Ban, S.; Nakamura, T.

1993-01-01

Accelerator shielding benchmark problems prepared by Working Group of Accelerator Shielding in the Research Committee on Radiation Behavior in the Atomic Energy Society of Japan were compiled by Radiation Safety Control Center of National Laboratory for High Energy Physics. Twenty-five accelerator shielding benchmark problems are presented for evaluating the calculational algorithm, the accuracy of computer codes and the nuclear data used in codes. (author)

Wind turbines and infrasound

International Nuclear Information System (INIS)

Howe, B.

2006-01-01

This paper provided the results of a study conducted to assess the impacts of wind farm-induced infrasound on nearby residences and human populations. Infrasound occurs at frequencies below those considered as detectable by human hearing. Infrasonic levels caused by wind turbines are often similar to ambient levels of 85 dBG or lower that are caused by wind in the natural environment. This study examined the levels at which infrasound poses a threat to human health or can be considered as an annoyance. The study examined levels of infrasound caused by various types of wind turbines, and evaluated acoustic phenomena and characteristics associated with wind turbines. Results of the study suggested that infrasound near modern wind turbines is typically not perceptible to humans through either auditory or non-auditory mechanisms. However, wind turbines often create an audible broadband noise whose amplitude can be modulated at low frequencies. A review of both Canadian and international studies concluded that infrasound generated by wind turbines should not significantly impact nearby residences or human populations. 17 refs., 2 tabs., 4 figs

Discord amongst the wind turbine buyers with regard to Dutch wind turbine manufacturers

International Nuclear Information System (INIS)

Janse, F.

1992-01-01

In the Netherlands two medium-large manufacturers of wind turbines exist: NedWind (Hollandia Kloos) and Windmaster Nederland (Begemann Groep). Also Lagerwey, which constructs wind turbines for the private market (farmers, cooperatives), is important for the Dutch market and successfull in Germany. There is a tendency amongst the Dutch energy utilities, which cooperate in the foundation WindPlan, to buy wind turbines from foreign manufacturers. Some energy utilities want to take advantage of the most attractive offers, while others want to cooperate in building up a Dutch wind turbine industry. 5 ills

46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

Science.gov (United States)

2010-10-01

... Status Main (Propulsion steam) turbine (2) (2) (2) (4, 5) Manual trip Main propulsion, diesel (1) (1) (1... lubrication Pressure Low Main propulsion, controllable pitch propeller Hydraulic oil Pressure High, Low...) Gas turbine (8) (8) (8) (8) (5) Engines and turbines Jacking/turning gear Engaged (8) Fuel oil (9) (9...

Gas fired advanced turbine system

Science.gov (United States)

Lecren, R. T.; White, D. J.

The basic concept thus derived from the Ericsson cycle is an intercooled, recuperated, and reheated gas turbine. Theoretical performance analyses, however, showed that reheat at high turbine rotor inlet temperatures (TRIT) did not provide significant efficiency gains and that the 50 percent efficiency goal could be met without reheat. Based upon these findings, the engine concept adopted as a starting point for the gas-fired advanced turbine system is an intercooled, recuperated (ICR) gas turbine. It was found that, at inlet temperatures greater than 2450 F, the thermal efficiency could be maintained above 50%, provided that the turbine cooling flows could be reduced to 7% of the main air flow or lower. This dual and conflicting requirement of increased temperatures and reduced cooling will probably force the abandonment of traditional air cooled turbine parts. Thus, the use of either ceramic materials or non-air cooling fluids has to be considered for the turbine nozzle guide vanes and turbine blades. The use of ceramic components for the proposed engine system is generally preferred because of the potential growth to higher temperatures that is available with such materials.

Effect of weather on pedestrian trip count and duration: City-scale evaluations using mobile phone application data

Directory of Open Access Journals (Sweden)

Anthony P. Vanky

2017-12-01

Full Text Available We examined the association between meteorological (weather conditions in a given locale and pedestrian trips frequency and duration, through the use of locative digital data. These associations were determined for seasonality, urban microclimate, and commuting. We analyzed GPS data from a broadly available activity tracking mobile phone application that automatically recorded 247,814 trips from 5432 unique users in Boston and 257,697 trips from 8256 users in San Francisco over a 50-week period. Generally, we observed increased air temperature and the presence of light cloud cover had a positive association with hourly trip frequency in both cities, regardless of seasonality. Temperature and weather conditions generally showed greater associations with weekend and discretionary travel, than with weekday and required travel. Weather conditions had minimal association with the duration of the trip, once the trip was initiated. The observed associations in some cases differed between the two cities. Our study illustrates the opportunity that emerging technology presents to study active transportation, and exposes new methods to wider consideration in preventive medicine. Keywords: Weather, Pedestrian activity, Walking, Weather conditions and active transportation, Microclimates, Spatial behavior, Mobile phones, Locative data, Emerging technology, Big data

Modulation of thalamocortical oscillations by TRIP8b, an auxiliary subunit for HCN channels.

Science.gov (United States)