WorldWideScience

Sample records for tuning vanadium oxide

  1. Enhancing the Electronic Conductivity of Vanadium-tellurite Glasses by Tuning the Redox State

    DEFF Research Database (Denmark)

    Kjeldsen, Jonas; Yue, Yuanzheng

    . In this work we vary the redox state of a given vanadium tellurite system by performing post heat-treatment in controlled atmosphere. This process is in theory not limited only to varying electronic conductivity, but also varying the glass structure, and hence, changing properties of the glasses, e.g, thermal......Transition metal oxides are used in a variety of electronic purposes, e.g., vanadium tellurite as cathode material in high-power demanding batteries. By tuning the redox state of vanadium, it is possible to achieve a lower internal resistance within the entire battery unit, thus a higher capacity...... and mechanical properties. Finally we give insight into the relation between the redox state and electronic conductivity....

  2. Catalysis science of supported vanadium oxide catalysts.

    Science.gov (United States)

    Wachs, Israel E

    2013-09-07

    Supported vanadium oxide catalysts contain a vanadium oxide phase deposited on a high surface area oxide support (e.g., Al2O3, SiO2, TiO2, etc.) and have found extensive applications as oxidation catalysts in the chemical, petroleum and environmental industries. This review of supported vanadium oxide catalysts focuses on the fundamental aspects of this novel class of catalytic materials (molecular structures, electronic structures, surface chemistry and structure-reactivity relationships). The molecular and electronic structures of the supported vanadium oxide phases were determined by the application of modern in situ characterization techniques (Raman, IR, UV-vis, XANES, EXAFS, solid state (51)V NMR and isotopic oxygen exchange). The characterization studies revealed that the supported vanadium oxide phase consists of two-dimensional surface vanadia sites dispersed on the oxide supports. Corresponding surface chemistry and reactivity studies demonstrated that the surface vanadia sites are the catalytic active sites for oxidation reactions by supported vanadia catalysts. Combination of characterization and reactivity studies demonstrate that the oxide support controls the redox properties of the surface vanadia sites that can be varied by as much as a factor of ~10(3).

  3. Methods for making lithium vanadium oxide electrode materials

    Science.gov (United States)

    Schutts, Scott M.; Kinney, Robert J.

    2000-01-01

    A method of making vanadium oxide formulations is presented. In one method of preparing lithium vanadium oxide for use as an electrode material, the method involves: admixing a particulate form of a lithium compound and a particulate form of a vanadium compound; jet milling the particulate admixture of the lithium and vanadium compounds; and heating the jet milled particulate admixture at a temperature below the melting temperature of the admixture to form lithium vanadium oxide.

  4. Lithium insertion in sputtered vanadium oxide film

    DEFF Research Database (Denmark)

    West, K.; Zachau-Christiansen, B.; Skaarup, S.V.

    1992-01-01

    Vanadium oxide films have been prepared by RF-sputtering using an oxygen containing sputter ps and a V2O5 target. The main component of these films is orthorhombic V2O5 with poor crystallinity and a tendency for ordering of the crystallites with the c-direction parallel to the substrate. All films...... were oxygen deficient compared to V2O5. Films prepared in pure argon were reduced to V(4) or lower. The vanadium oxide films were tested in solid-state lithium cells. Films sputtered in oxygen showed electrochemical properties similar to crystalline V2O5. The main differences are a decreased capacity...

  5. Technological and economic evaluation of the oxidizer for vanadium

    International Nuclear Information System (INIS)

    Cherkashin, V.I.; Denisova, L.V.; Sklyar, A.V.; Khlopkov, L.P.

    1978-01-01

    Vanadium oxidizers, applied to processing vanadium-containing scrap resulted from titanium production are characterized and evaluated according to their technological properties and economic expenses. Advantages of potassium perchlorate, ammonium persulphate, and pyrolusite over sodium and calcium hypochlorites are shown

  6. Photoinduced optical dynamics of phase-change vanadium oxides

    Science.gov (United States)

    Kumar, Nardeep; Rúa, Armando; Chevres, Lee R.; Theran, Larry; Ayala, Brian; Fernández, Félix E.; Lysenko, Sergiy

    2017-08-01

    Using time- and angle-resolved hemispherical elastic light scattering technique we reveal complex pathways of photoinduced nonlinear optical dynamics in VO2, V2O3 and V3O5 thin films. The structural dynamics was monitored by using an ultrafast diffraction conoscopy technique. The evolution of phases in these correlated oxides is substantially different and significantly depends on optical excitation, temperature and size of grains and domains. Strong optical nonlinearity along with its complex transient dynamics makes vanadium oxides attractive for high-contrast all-optical switches, high-speed optical data storage and holographic devices. The characteristic time of optical nonlinearity can be tuned from several femtoseconds to picoseconds by altering the excitation fluence and size of grains and domains. Additional control of ultrafast phase transition dynamics can be achieved by photoacoustical generation of strain waves. Depending on material morphology and level of optical excitation, the optical signal shows coherent oscillations caused by photoacoustic wave at picosecond and nanosecond time scales. Complex nonlinear dynamics of correlated vanadium oxides can provide a way for precise tuning of transient optical and electronic properties in photonic devices.

  7. Experimental studies and applications of vanadium oxides.

    Science.gov (United States)

    Williams, L., Jr.

    1972-01-01

    The electrical and electrochemical properties of V-5 and V-7 vanadium oxides were investigated. The effects of pressure, temperature and moisture on the bulk resistivity of the oxides in powder, sintered, and crystalline form were determined, and the static and dynamic volt-ampere characteristics were obtained. Sintered samples tested showed better electrical stability than the compressed powder samples. Two types of commercially available vanadium pentoxide were heat-treated to obtain various crystalline oxide forms which were mounted on alumina substrates and terminated by thick-film conductors for making electrical connections. Indications are that these materials could have applications as sensors, critical-temperature resistors, high-speed switches, and temperature-compensation elements in hybrid microelectronic circuits.

  8. Vanadium

    Science.gov (United States)

    Kelley, Karen D.; Scott, Clinton T.; Polyak, Désirée E.; Kimball, Bryn E.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    sands, and oil shales may be important future sources.Vanadium occurs in one of four oxidation states in nature: +2, +3, +4, and +5. The V3+ ion has an octahedral radius that is almost identical to that of (Fe3+) and (Al3+) and, therefore, it substitutes in ferromagnesian minerals. During weathering, much of the vanadium may partition into newly formed clay minerals, and it either remains in the +3 valence state or oxidizes to the +4 valence state, both of which are relatively insoluble. If erosion is insignificant but chemical leaching is intense, the residual material may be enriched in vanadium, as are some bauxites and laterites. During the weathering of igneous, residual, or sedimentary rocks, some vanadium oxidizes to the +5 valence state, especially in the intensive oxidizing conditions that are characteristic of arid climates.The average contents of vanadium in the environment are as follows: soils [10 to 500 parts per million (ppm)]; streams and rivers [0.2 to 2.9 parts per billion (ppb)]; and coastal seawater (0.3 to 2.8 ppb). Concentrations of vanadium in soils (548 to 7,160 ppm) collected near vanadium mines in China, the Czech Republic, and South Africa are many times greater than natural concentrations in soils. Additionally, if deposits contain sulfide minerals such as chalcocite, pyrite, and sphalerite, high levels of acidity may be present if sulfide dissolution is not balanced by the presence of acid-neutralizing carbonate minerals. Some of the vanadium-bearing deposit types, particularly some SSV and black-shale deposits, contain appreciable amounts of carbonate minerals, which lowers the acid-generation potential.Vanadium is a micronutrient with a postulated requirement for humans of less than 10 micrograms per day, which can be met through dietary intake. Primary and secondary drinking water regulations for vanadium are not currently in place in the United States. Vanadium toxicity is thought to result from an intake of more than 10 to 20 milligrams

  9. Partial Oxidation of n-Pentane over Vanadium Phosphorus Oxide ...

    African Journals Online (AJOL)

    NICOLAAS

    The selective oxidation ofn-pentane to value-added products, maleic anhydride or phthallic anhydride by vanadium phosphorus oxide loaded on hydroxyapatites as catalysts and oxygen as oxidant was investigated. Hydroxyapatite (HAp) and cobalt- hydroxyapatite (Co-HAp) were prepared by the co-precipitation method ...

  10. Modified lithium vanadium oxide electrode materials products and methods

    Science.gov (United States)

    Thackeray, Michael M.; Kahaian, Arthur J.; Visser, Donald R.; Dees, Dennis W.; Benedek, Roy

    1999-12-21

    A method of improving certain vanadium oxide formulations is presented. The method concerns fluorine doping formulations having a nominal formula of LiV.sub.3 O.sub.8. Preferred average formulations are provided wherein the average oxidation state of the vanadium is at least 4.6. Herein preferred fluorine doped vanadium oxide materials, electrodes using such materials, and batteries including at least one electrode therein comprising such materials are provided.

  11. Oxidative dehydrogenation of propane over niobia supported vanadium oxide catalysts

    NARCIS (Netherlands)

    Watling, T.C.; Watling, T.C.; Deo, G.; Seshan, Kulathuiyer; Wachs, I.E.; Lercher, J.A.

    1996-01-01

    Oxidative dehydrogenation (ODH) of propane is examined over a series of catalysts, which include Nb2O5 supported monolayer V2O5 catalysts, bulk vanadia-niobia with different vanadium oxide loadings and prepared by four different methods, V2O5and Nb2O5. The intrinsic activity (TOF) of the samples

  12. Vanadium Oxidation State Determination by X-Ray Absorption Spectroscopy

    Science.gov (United States)

    Duchesne, Marc A.; Nakano, Jinichiro; Hu, Yongfeng; MacLennan, Aimee; Hughes, Robin W.; Bennett, James; Nakano, Anna

    Vanadium is found in slags produced during metal refinement and fossil fuel combustion/gasification. The oxidation state of vanadium in slag has technological and environmental implications. For example, it may affect slag flow and refractory wear inside reactors, as well as leachability and toxicity of industrial by-products. Determination of vanadium's oxidation state in crystalline phases can be achieved via the widely adopted X-ray diffraction (XRD) technique. However, this technique does not provide information on vanadium in amorphous phases. The objective of this research is to determine the oxidation state of vanadium in petroleum coke gasification samples and laboratory samples using X-ray absorption spectroscopy (XAS) with Canadian Light Source's soft X-ray micro-characterization beamline (SXRMB). Linear combination fitting of XAS spectra with reference samples allowed quantitative determination of vanadium speciation.

  13. [Oxidative Stress Level of Vanadium-exposed Workers].

    Science.gov (United States)

    Wei, Teng-da; Li, Shun-pin; Liu, Yun-xing; Tan, Chun-ping; Li, Juan; Zhang, Zu-hui; Lan, Ya-jia; Zhang, Qin

    2015-11-01

    To determine the oxidative stress level in peripheral blood of vanadium-exposed workers, as an indication of population health effect of vanadium on human neurobehavioral system. 86 vanadium-exposed workers and 65 non-exposed workers were recruited by cluster sampling. A questionnaire was administered to collect demographic and occupational exposure information. Serum activity of superoxide dismutase (SOD), inducible nitric oxide synthase (iNOS) and malonaldehyde (MDA) contents were detected by kit assay. The differences in oxidative stress level between vanadium-exposed and non-exposed workers were compared. Vanadium-exposed workers had higher levels of MDA contents than the controls. The total superoxide dismutase(T-SOD) activity in vanadium-exposed workers was significantly lower than that in the controls, which was associated with lowered levels of manganese superoxide dismutase (Mn-SOD) activity. No changes in serum levels of cupro-zinc superoxide dismutase (CuZn-SOD) was found in vanadium-exposed workers. No difference in iNOS activity was found between vanadium-exposed workers and controls. Vanadium exposure increases free radical production in serum and reduces antioxidant capacity. But the relationship between vanadium exposure and iNOS damage remains uncertain.

  14. Electrical properties of vanadium oxide subject to hydrogen plasma treatment

    OpenAIRE

    Pergament, Alex; Kuldin, Nik

    2008-01-01

    The effect of doping with hydrogen on the electrical properties of vanadium oxide is studied. For vanadium oxide films, subject to cold hydrogen plasma treatment, the temperature dependence of resistance with a maximum at T ~ 100 K is observed. Also, the dependence of the a.c. resistance on frequency is studied. A strategy for fabrication new superconducting materials is discussed.

  15. Hydrothermal Synthesis of Nanostructured Vanadium Oxides

    Science.gov (United States)

    Livage, Jacques

    2010-01-01

    A wide range of vanadium oxides have been obtained via the hydrothermal treatment of aqueous V(V) solutions. They exhibit a large variety of nanostructures ranging from molecular clusters to 1D and 2D layered compounds. Nanotubes are obtained via a self-rolling process while amazing morphologies such as nano-spheres, nano-flowers and even nano-urchins are formed via the self-assembling of nano-particles. This paper provides some correlation between the molecular structure of precursors in the solution and the nanostructure of the solid phases obtained by hydrothermal treatment. PMID:28883325

  16. Cytotoxicity of nanostructured vanadium oxide on human cells in vitro.

    Science.gov (United States)

    Rhoads, Laura S; Silkworth, William T; Roppolo, Megan L; Whittingham, M Stanley

    2010-02-01

    Vanadium oxide nanostructures have potential uses for electrochemistry and catalysis, yet little is known about their toxicology. In this study, cultured human colon carcinoma cells (Caco-2) were exposed to vanadium oxide and their viability assessed with the neutral red assay. Cells exposed to either vanadium oxide (powdered form) or ethylene diamine intercalated vanadium oxide (enH(2))V(7)O(16) demonstrated no significant reduction in viability after twenty-four hours, yet cells exposed to vanadium oxide nanotubes demonstrated a significant loss in viability after four hours. The physical size and structure of the nanotubes may play an important role in their cytotoxic effects, and the safety of using such nanomaterials must be considered.

  17. Vanadium removal by metal (hydr)oxide adsorbents.

    Science.gov (United States)

    Naeem, A; Westerhoff, P; Mustafa, S

    2007-04-01

    Vanadium is listed on the United States Environment Protection Agency (USEPA) candidate contaminant list # 2 (CCL2), and regulatory guidelines for vanadium exist in some US states. The USEPA requires treatability studies before making regulatory decisions on CCL2 contaminants. Previous studies have examined vanadium adsorption onto some metal hydroxides but not onto commercially available adsorbents. This paper briefly summarizes known vanadium occurrence in North American groundwater and assesses vanadium removal by three commercially available metal oxide adsorbents with different mineralogies. GTO (Dow) is TiO2 based and E-33 (Seven Trents) and GFH (US Filter) are iron based. Preliminary vanadate adsorption kinetics onto GFH, E-33 and GTO has been studied and the homogenous surface diffusion model (HSDM) is used to describe the adsorption kinetics data. The effects of pH, vanadium concentration, and volume/mass ratio are assessed. Vanadium adsorption decreases with increasing pH, with maximum adsorption capacities achieved in at pH 3-4. Results indicate that all adsorbents remove vanadium; GFH has the highest adsorption capacity, followed by GTO and E-33. Data are best fit with the Langmuir model rather than Freundlich isotherms. Both the sorption maxima (Xm) and binding energy constant (b) follow the trend GFH>GTO>E-33. Naturally occurring vanadium is also removed from Arizona ground water in rapid small-scale column tests (RSSCTs). Metal oxide adsorption technologies currently used for arsenic removal may also remove vanadium but not always with the same effectiveness.

  18. Amorphous Mixed-Valence Vanadium Oxide/Exfoliated Carbon Cloth Structure Shows a Record High Cycling Stability.

    Science.gov (United States)

    Song, Yu; Liu, Tian-Yu; Yao, Bin; Kou, Tian-Yi; Feng, Dong-Yang; Liu, Xiao-Xia; Li, Yat

    2017-04-01

    Previous studies show that vanadium oxides suffer from severe capacity loss during cycling in the liquid electrolyte, which has hindered their applications in electrochemical energy storage. The electrochemical instability is mainly due to chemical dissolution and structural pulverization of vanadium oxides during charge/discharge cyclings. In this study the authors demonstrate that amorphous mixed-valence vanadium oxide deposited on exfoliated carbon cloth (CC) can address these two limitations simultaneously. The results suggest that tuning the V 4+ /V 5+ ratio of vanadium oxide can efficiently suppress the dissolution of the active materials. The oxygen-functionalized carbon shell on exfoliated CC can bind strongly with VO x via the formation of COV bonding, which retains the electrode integrity and suppresses the structural degradation of the oxide during charging/discharging. The uptake of structural water during charging and discharging processes also plays an important role in activating the electrode material. The amorphous mixed-valence vanadium oxide without any protective coating exhibits record-high cycling stability in the aqueous electrolyte with no capacitive decay in 100 000 cycles. This work provides new insights on stabilizing vanadium oxide, which is critical for the development of vanadium oxide based energy storage devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Reduction Behaviors of Iron, Vanadium and Titanium Oxides in Smelting of Vanadium Titanomagnetite Metallized Pellets

    Science.gov (United States)

    Wang, Shuai; Guo, Yufeng; Jiang, Tao; Yang, Lu; Chen, Feng; Zheng, Fuqiang; Xie, Xiaolin; Tang, Minjun

    2017-09-01

    The complicated reduction behaviors of iron, vanadium and titanium oxides must be accurately controlled for the successful smelting of vanadium titanomagnetite. The aim of this study is to investigate the effects of the binary basicity, MgO content, smelting temperature, duration and reductants on the reduction of iron, vanadium and titanium oxides during the electric furnace smelting of vanadium titanomagnetite metallized pellets. The results demonstrate that the recovery ratios of both iron and vanadium increase as the binary basicity increases from 0.9 to 1.2, whereas the reduction of titanium oxides is mitigated when the basicity is maintained at 1.1. Compared to its weak effect on the recovery ratio of iron, increasing MgO content improves the vanadium recovery ratio. A low content of titanium in molten iron is obtained when the MgO content in the slag is lower than 11%, whereas the titanium content in the molten iron increases as the MgO content increases further. Moreover, the iron and vanadium recovery ratios, and the Ti content in the molten iron, increase with increasing smelting temperature, duration and reductant content.

  20. Platinum–Vanadium Oxide Nanotube Hybrids

    Directory of Open Access Journals (Sweden)

    Hernández EduardoPadrón

    2010-01-01

    Full Text Available Abstract The present contribution reports on the features of platinum-based systems supported on vanadium oxide nanotubes. The synthesis of nanotubes was carried out using a commercial vanadium pentoxide via hydrothermal route. The nanostructured hybrid materials were prepared by wet impregnation using two different platinum precursors. The formation of platinum nanoparticles was evaluated by applying distinct reduction procedures. All nanostructured samples were essentially analysed by X-ray diffraction and transmission electron microscopy. After reduction, transmission electron microscopy also made it possible to estimate particle size distribution and mean diameter calculations. It could be seen that all reduction procedures did not affect the nanostructure of the supports and that the formation of metallic nanoparticles is quite efficient with an indistinct distribution along the nanotubes. Nevertheless, the reduction procedure determined the diameter, dispersion and shape of the metallic particles. It could be concluded that the use of H2PtCl6 is more suitable and that the use of hydrogen as reducing agent leads to a nanomaterial with unagglomerated round-shaped metallic particles with mean size of 6–7 nm.

  1. Electrochemical doping of vanadium oxide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Popa, A.; Hellmann, I.; Klingeler, R.; Kataev, V.; Arango, Y.; Taeschner, C.; Knupfer, M.; Buechner, B. [Leibniz-Institute for Solid State and Materials Research, IFW Dresden (Germany); Vavilova, E. [Leibniz-Institute for Solid State and Materials Research, IFW Dresden (Germany); Kazan Physical Technical Institute, RAS, Kazan (Russian Federation); Klauss, H.H. [Technical University- Dresden (Germany); Masquelier, C. [Laboratoire de Reactivite et de Chimie des Solides, Amiens (France)

    2008-07-01

    A new class of nanoscale low-dimensional magnets, mixed valent vanadium oxide multiwall nanotubes (VO{sub x}-NTs), show up diverse novel properties ranging from spin frustration and semiconductivity to ferromagnetism by doping with either electrons or holes. The structural low dimensionality and mixed valency of vanadium ions yield a complex temperature dependence of the static magnetization and the nuclear relaxation rates. Upon electron doping of VO{sub x}-NTs, our spectroscopic data confirm an increased number of magnetic V{sup 4.4+} sites. Interestingly, a considerable superparamagnetic moment of 0.1 {mu}{sub B} is found at room temperature after electrochemical intercalation of 10% of Li while no strong effect on the magnetization occurs for other doping levels. Recent {mu}SR studies on Li{sub 0.1}VO{sub x}-NT indeed confirm that more than 40% of the sample is magnetic. This result is corroborated by Li{sup 7}-NMR measurements which confirm the increase of V{sup 4.4+} sites upon Li doping and imply an additional internal magnetic field only for the doping level 0.1.

  2. Effects of synthesis methods of vanadium oxide nanotubes on the inter layer distances

    International Nuclear Information System (INIS)

    Aghabozorg, H. R.; Mousavi, R.; Asckari, S.; Aghabozorg, H.

    2007-01-01

    Vanadium oxide nanotubes were synthesized via two methods: (1) Adding a template to vanadium oxide gels, (2) Grinding mixture of a template and vanadium oxide by using a ball mill. Influence of preparation method on structure of vanadium oxide nanotubes has been investigated. Vanadium oxide nanotubes has been characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) techniques

  3. Chromosomal damage induced by vanadium oxides in human peripheral lymphocytes.

    Science.gov (United States)

    Rodríguez-Mercado, Juan J; Alvarez-Barrera, Lucila; Altamirano-Lozano, Mario A

    2010-01-01

    Fly ash, the inorganic residue resulting from the combustion of some fuels, may almost exclusively contain vanadium oxides, compounds which exert potential toxic effects on a wide variety of in vitro and in vivo biological systems. Because information related to the oxidation state responsible for inducing genotoxic effects is controversial, the aim of the present study was to evaluate the effects of three vanadium salts in vitro. Human peripheral lymphocyte cultures were exposed to 1, 2, 4, or 8 microg/mL of vanadium(III) trioxide, vanadium(IV) tetraoxide, or vanadium(V) pentoxide (V(2)O(3), V(2)O(4), or V(2)O(5), respectively). These cultures were then screened for structural chromosomal aberrations, and mitotic index (MI) measurements were made. Cytogenetic evaluations showed that only V(2)O(4) increased the percentage of aberrant cells (without gaps) and chromosome damage (including and excluding gaps), while all compounds led to a decrease in the MI. These results demonstrate that vanadium(III), vanadium(IV), and vanadium(V) are all capable of inducing cytotoxicity, but only oxidation state IV induces clastogenic effects.

  4. Lithium diffusion in silver vanadium oxide

    International Nuclear Information System (INIS)

    Takeuchi, E.S.; Thiebolt, W.C. III

    1989-01-01

    Lithium/silver vanadium oxide (SVO) batteries have been developed to power implantable devices. The voltage of Li/SVO cells decreases with discharge allowing state of charge assessment by accurate determination of the cells' open circuit voltage. The open circuit voltage recovery of Li/SVO cells was monitored during intermittent high rate discharge. It was found that the voltage does not recover at the same rate or magnitude at all depths of discharge. The authors describe lithium diffusion in SVO studied by low scan rate voltammetry where utilization of SVO at various scan rates was used to determine the diffusion rate of lithium. A pulse technique was also used where the rate of lithium diffusion was measured at various depths of discharge

  5. Electrochemical studies on vanadium oxides, 9

    International Nuclear Information System (INIS)

    Miura, Takashi; Yamamoto, Masahiro; Takahashi, Hirobumi; Kishi, Tomiya; Nagai, Takashi

    1979-01-01

    The mechanism of the anodic oxidation of various organic compounds-including methanol, formaldehyde, formic acid, ethanol, acetaldehyde and acetic acid-at illuminated vanadium pentoxide (V 2 O 5 ) single crystal electrodes were investigated in aqueous solutions of an H 2 SO 4 -K 2 SO 4 system of about pH 2, in which oxygen evolution from water molecules had previously been confirmed to occur with a current efficiency of about 100%. It was shown that all the organics were oxidized by the so called hole-current doubling mechanism, and that the oxygen evolution reaction, which competed with the above oxidation reaction at the hole-capturing step from the valence band of the electrode, proceeded by the simple hole-capturing mechanism, not followed by an electron injection step into the conduction band. Furthermore, it is considered that chloride ions added to the electrolytes tended to hinder hole-current doubling oxidation owing to their reactivity with the holes at the illuminated V 2 O 5 electrodes. (author)

  6. Plasma enhanced chemical vapor deposition (PECVD) method of forming vanadium oxide films and vanadium oxide thin-films prepared thereby

    Science.gov (United States)

    Zhang, Ji-Guang; Tracy, C. Edwin; Benson, David K.; Turner, John A.; Liu, Ping

    2000-01-01

    A method is disclosed of forming a vanadium oxide film on a substrate utilizing plasma enhanced chemical vapor deposition. The method includes positioning a substrate within a plasma reaction chamber and then forming a precursor gas comprised of a vanadium-containing chloride gas in an inert carrier gas. This precursor gas is then mixed with selected amounts of hydrogen and oxygen and directed into the reaction chamber. The amounts of precursor gas, oxygen and hydrogen are selected to optimize the final properties of the vanadium oxide film An rf plasma is generated within the reaction chamber to chemically react the precursor gas with the hydrogen and the oxygen to cause deposition of a vanadium oxide film on the substrate while the chamber deposition pressure is maintained at about one torr or less. Finally, the byproduct gases are removed from the plasma reaction chamber.

  7. XPS study of vanadium surface oxidation by oxygen ion bombardment

    Czech Academy of Sciences Publication Activity Database

    Alov, N.; Kutsko, D.; Spirovová, Ilona; Bastl, Zdeněk

    2006-01-01

    Roč. 600, č. 8 (2006), s. 1628-1631 ISSN 0039-6028 R&D Projects: GA ČR GA104/04/0467 Institutional research plan: CEZ:AV0Z40400503 Keywords : vanadium oxide * oxide film * ion-beam oxidation * X-ray photoelectron spectroscopy Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.880, year: 2006

  8. Vanadium oxide monolayer catalysts. I. Preparation, characterization, and thermal stability

    NARCIS (Netherlands)

    Roozeboom, F.; Fransen, T.; Mars, P.; Gellings, P.J.

    1979-01-01

    Vanadium oxide catalysts of the monolayer type have been prepared by means of chemisorption of vanadate(V)-anions from aqueous solutions and by chemisorption of gaseous V2O3(OH)4. Using Al2O3, Cr2O3, TiO2, CeO2 and ZrO2, catalysts with an approximately complete monomolecular layer of vanadium(V)

  9. X-ray Absorption Spectroscopy of Supported Vanadium Oxide Catalysts

    NARCIS (Netherlands)

    Keller, D.E.

    2006-01-01

    Supported vanadium oxide catalysts have been the subject of detailed investigations for many decades and a relatively large amount of information is available on their structure, however, the exact molecular structure and the way these surface species are anchored on the support oxide has not yet

  10. Vanadium Doped Tungsten Oxide Material - Electrical Physical and Sensing Properties

    Directory of Open Access Journals (Sweden)

    Shishkin N. Y.

    2008-05-01

    Full Text Available The electrical physical and sensing (to VOCs and inorganic gases properties of vanadium doped tungsten oxide in the regions of phase transition temperature were investigated. Vanadium oxide (II dimerization was observed in the doped material, corresponding to new phase transition. The extreme sensitivity and selectivity to chemically active gases and vapors in small concentrations: CO, NOx, NH3 acetone, ethanol near phase transitions temperature was found. Sensor elements were manufactured for the quantitative detection (close to 1 ppm of alcohol and ammonia.

  11. THE INFLUENCE OF NIOBIUM ON THE ACIDITY AND STRUCTURE OF GAMMA-ALUMINA-SUPPORTED VANADIUM OXIDES

    Directory of Open Access Journals (Sweden)

    Sathler M.N.B.

    1998-01-01

    Full Text Available Gamma-alumina-supported niobium oxide was used as a support for vanadium oxides. The influence of the addition of niobium oxide was studied by looking for changes in the structure and acid-base character of superficial species. Vanadium oxide was deposited using the continuous adsorption method; niobium oxide was impregnated using the incipient wetness method. The catalysts were characterized by XPS, UV-visible and IR spectroscopy. Catalytic tests were performed using propane oxidation reaction at 400oC. For coverage below the monolayer, both vanadium and niobium oxides were observed in slightly condensed superficial species. The presence of vanadium oxide on the support was found to increase the Lewis acidity and create some Bronsted acidity. Higher catalytic activity and selectivity for propene were associated with vanadium oxides. The presence of niobium did not contribute to the modification of the chemical properties of superficial vanadium but did decrease the adsorption of vanadium on the alumina.

  12. Vanadium

    International Nuclear Information System (INIS)

    Duke, V.W.A.

    1983-07-01

    Although a relatively abundant element, vanadium occurs only rarely in sufficient concentration to be worked commercially. In most cases, vanadium is produced as a co-product of some other element, most commonly iron. The principal ore deposits of vanadium occur in titaniferous magnetites that have been formed by magnetic segregation. Important commercial deposits of vanadium also occur associated with uranium, and with phosphate deposits. The principal uses of vanadium are in the production of special purpose, particularly high-strength low-alloy steels, in the manufacture of titanium alloys, and as a catalyst, notably in the manufacture of sulphuric acid. Small quantities of vanadium, often in combination with niobium, are added to steel to bring about toughening through grain refinement, and increased tensile strength through precipitation hardening. Known world reserves of vanadium are very large and fully adequate to meet any foreseeable demand. By far the largest known deposits of vanadium occur in South Africa. Many other similar deposits are known, but are only exploited in the USSR and China. The present total world demand for vanadium amounts to about 40 000 tons of metal annually and this is produced primarily in four countries, South Africa, the USSR, the People's Republic of China and the United States of America, in that order. South Africa is the principal vanadium producing country in the world, supplying vanadium in various forms. Vanadium has a very low and non-accumulative toxicity; recovery plants can be operated in such a manner to ensure no air or steam pollution results

  13. Chemistry, spectroscopy and the role of supported vanadium oxides in heterogeneous catalysis

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Keller, D.E.

    2003-01-01

    Supported vanadium oxide catalysts are active in a wide range of applications. In this review, an overview is given of the current knowledge available about vanadium oxide-based catalysts. The review starts with the importance of vanadium in heterogeneous catalysis, a discussion of the molecular

  14. Novel vanadium phosphate phases as catalysts for selective oxidation

    Indian Academy of Sciences (India)

    Unknown

    Abstract. In our effort to induce novel modifications in the structure of some important vanadium phosphate phases used as selective oxidation catalysts, it has been observed that metal ions such as Zn2+, Ni2+, Pd2+ can be incorporated into the vanadyl hydrogen phosphate VOHPO4⋅0⋅5H2O phase in very different ways.

  15. Improving methane gas sensing properties of multi-walled carbonnanotubes by vanadium oxide filling

    CSIR Research Space (South Africa)

    Chimowa, George

    2017-08-01

    Full Text Available Manipulation of electrical properties and hence gas sensing properties of multi-walled carbon nanotubes (MWNTs) by filling the inner wall with vanadium oxide is presented. Using a simple capillary technique, MWNTs are filled with vanadium metal...

  16. How to master vanadium oxide stoichiometry and phase formation? Insights in the aqueous precursor chemistry

    OpenAIRE

    Peys, Nick

    2014-01-01

    The main objective of this work was to obtain fundamental insights in the aqueous vanadium precursor chemistry and in their relation to the vanadium oxide stoichiometry=phase formation, obtained via a solution deposition route.

  17. Vanadium oxide/polypyrrole aerogel nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Dave, B.C.; Dunn, B.S.; Wong, H.P. [Univ. of California, Los Angeles, CA (United States). Dept. of Materials Science and Engineering; Leroux, F.; Nazar, L.F. [Univ. of Waterloo, Ontario (Canada). Dept. of Chemistry

    1996-12-31

    Vanadium pentoxide/polypyrrole aerogel (ARG) nanocomposites were prepared by hydrolysis of VO(OC{sub 3}H{sub 7}){sub 3} using pyrrole/water/acetone mixtures. Monolithic green-black gels with polypyrrole/V ratios ranging from 0.15 to 1.0 resulted from simultaneously polymerization of the pyrrole and vanadium alkoxide precursors. Supercritical drying yielded high surface (150--200 m{sup 2}/g) aerogels, of sufficient mechanical integrity to allow them to be cut without fracturing. TEM studies of the aerogels show that they are comprised of fibers similar to that of V{sub 2}O{sub 5} ARG`s, but with a much shorter chain length. Evidence from IR that the inorganic and organic components strongly interact leads them to propose that this impedes the vanadium condensation process. The result is ARG`s that exhibit decreased electronic conductivity with increasing polymer content. Despite the unexpected deleterious effect of the conductive polymer on the bulk conductivity, at low polymer content, the nanocomposite materials show enhanced electrochemical properties for Li insertion compared to the pristine aerogel.

  18. Mechanical characterization of hotplate synthesized vanadium oxide nanobelts

    International Nuclear Information System (INIS)

    Zhu Yanwu; Zhang Yousheng; Dai Ling; Cheong, Fook-Chiong; Tan, Vincent; Sow, Chorng-Haur; Lim, Chwee-Teck

    2010-01-01

    Vanadium oxide nanobelts have been synthesized on Si or SiN substrates by simply heating vanadium foils on a hotplate. As-grown nanobelts were characterized as V 2 O 5 .nH 2 O (0.3 2 O 5 phase and a polycrystalline structure was observed. The Young's modulus of the annealed nanobelts showed more consistent values at an average of 28.9 GPa, lower than the calculated modulus of bulk α-V 2 O 5 at 68 GPa.

  19. Synthesis and electrochemical performance of hierarchical nano-vanadium oxide.

    Science.gov (United States)

    Mjejri, I; Sediri, F

    2016-10-15

    Hierarchically structured nano-vanadium oxides with different morphologies have been synthesized via a template-free hydrothermal route by adjusting the organic precursor quantities. The effects of molar ratio on structure, morphology and crystallite sized were investigated. The possible growth mechanism is also proposed. When evaluated as a cathode material for lithium-ion batteries, the vanadium oxyhydroxide H2V3O8 samples deliver very high charging capacity, good reversibility and a better cycling stability. The excellent electrochemical performance is attributed to multiple advantageous structural features. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Effect of drying method on properties of vanadium-molybdenum oxide catalysts

    International Nuclear Information System (INIS)

    Gorshkova, T.P.; Savchenko, L.A.; Tarasova, D.V.; Tret'yakov, Yu.D.; Olen'kova, I.P.; Nikoro, T.A.; Maksimov, N.G.

    1981-01-01

    Effect of drying method of molybdenum and vanadium salt solutions on physicochemical and catalytical properties of vanadium-molybdenum catalysts is studied. It is shown that the drying method of solutions determines the completeness of vanadium binding into oxide vanadium-molybdenum compounds and thus effects the activity and selectivity of catalysts in acrolein oxidation into acrylic acid. Besides the drying method determines the porous structure of catalysts [ru

  1. A comparative study of the toxicological aspects of vanadium pentoxide and vanadium oxide nanoparticles.

    Science.gov (United States)

    Kulkarni, Apoorva; Kumar, Goru Santosh; Kaur, Jasmine; Tikoo, Kulbhushan

    2014-11-01

    Indiscriminate use of vanadium oxide nanoparticles (NPs) in steel industries and their release during combustion of fossil fuels makes it essential to study their toxic potential. Herein, we assessed the toxicological effects of two types of in-house synthesized vanadium oxide NPs in Wistar rats exposed to NPs through inhalation route. V2O5 and VO2 NPs exhibited rod and spherical symmetry, respectively with a mean diameter of 50±20 and 30±10 nm. Assessment of bronchoalveolar lavage fluid parameters demonstrated that VO2 NP-exposed animals had higher levels of lactate dehydrogenase, gamma-glutamyl transpeptidase and alkaline phosphatase as compared to V2O5 NP-exposed animals. The levels of oxidative stress markers malondialdehyde and reduced glutathione also indicated higher toxic potential of VO2 NPs. Moreover, after 7-day recovery, the levels of the above parameters were closer to normal levels only in V2O5-exposed animals. Interestingly, histopathological and immune-histopathology analysis (TNF-α) of lung tissue showed higher damage and inflammatory response in VO2 NP-exposed animals, which persisted even after 7 days of recovery period. Surprisingly, the carcinogenic potential of vanadium oxide NPs came into light which was indicated by terminal deoxynucleotidyl transferase dUTP nick-end labeling assay as well as the decreased levels of p53 and Bax, in lung tissue of NP-exposed animals. Notably, the physiochemical characterization of NPs, especially the shape and the size, play a central role in shaping the toxicity of these NPs and thus should be extensively evaluated for outlining the regulatory guidelines.

  2. Synthesis of vanadium oxide nanoparticles and characterization by TEM

    Energy Technology Data Exchange (ETDEWEB)

    Kunzmann, Christina; Ullrich, Aladin; Klemm, Matthias; Krispin, Michael; Horn, Siegfried [Lehrstuhl fuer Experimentalphysik II, Universitaet Augsburg, D-86135 Augsburg (Germany)

    2011-07-01

    We have synthesized vanadium oxide nanoparticles by thermal decomposition of vanadylacetylacetonate (VO(acac){sub 2}) on a highly oriented pyrolytic graphite substrate under Ar/H{sub 2} atmosphere. Particles were analyzed by high resolution transmission electron microscopy (HR-TEM) and atomic force microscopy (AFM). Chemical composition of the particles was confirmed by TEM energy dispersive x-ray analy sis (EDX). Our analysis shows that the degree of crystallinity as well as the morphology depends on the reaction parameters, e.g. temperature and concentration. For low concentrations of VO(acac){sub 2} the particle size varies between 9 and 17 nm. With increasing concentration of VO(acac){sub 2} the particle size increases and particle size distribution broadens. Particles with cubic section exhibit lattice spacing in agreement with V{sub 2}O{sub 3}. In addition, for high concentration samples, rod-like particles are found, which show a different crystalline vanadium oxide phase.

  3. LiCl/PVA gel electrolyte stabilizes vanadium oxide nanowire electrodes for pseudocapacitors.

    Science.gov (United States)

    Wang, Gongming; Lu, Xihong; Ling, Yichuan; Zhai, Teng; Wang, Hanyu; Tong, Yexiang; Li, Yat

    2012-11-27

    Here we report a new strategy to improve the electrochemical stability of vanadium oxide electrodes for pseudocapacitors. Vanadium oxides are known to suffer from severe capacitance loss during charging/discharging cycling, due to chemical dissolution and ion intercalation/deintercalation-induced material pulverization. We demonstrate that these two issues can be addressed by using a neutral pH LiCl/PVA gel electrolyte. The function of the gel electrolyte is twofold: (i) it reduces the chemical dissolution of amphoteric vanadium oxides by minimizing water content and providing a neutral pH medium and (ii) it serves as a matrix to maintain the vanadium oxide nanowire network structure. Vanadium oxide nanowire pseudocapacitors with gel electrolyte exhibit excellent capacitance retention rates of more than 85% after cycling for 5000 cycles, without sacrificing the electrochemical performance of vanadium oxides.

  4. Gas-Phase Partial Oxidation of Lignin to Carboxylic Acids over Vanadium Pyrophosphate and Aluminum-Vanadium-Molybdenum.

    Science.gov (United States)

    Lotfi, Samira; Boffito, Daria C; Patience, Gregory S

    2015-10-26

    Lignin is a complex polymer that is a potential feedstock for aromatic compounds and carboxylic acids by cleaving the β-O-4 and 5-5' linkages. In this work, a syringe pump atomizes an alkaline solution of lignin into a catalytic fluidized bed operating above 600 K. The vanadium heterogeneous catalysts convert all the lignin into carboxylic acids (up to 25 % selectivity), coke, carbon oxides, and hydrogen. Aluminum-vanadium-molybdenum mostly produced lactic acid (together with formic acid, acrylic acid, and maleic anhydride), whereas the vanadium pyrophosphate catalyst produced more maleic anhydride. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Crossing points in the electronic band structure of vanadium oxide

    Directory of Open Access Journals (Sweden)

    Keshav N. Shrivastava

    2010-03-01

    Full Text Available The electronic band structures of several models of vanadium oxide are calculated. In the models 1-3, every vanadium atom is connected to 4 oxygen atoms and every oxygen atom is connected to 4 vanadium atoms. In model 1, a=b=c 2.3574 Å; in model 2, a= 4.7148 Å, b= 2.3574 Å and c= 2.3574 Å; and in model 3, a= 4.7148 Å, b= 2.3574 Å and c= 4.7148 Å. In the models 4-6, every vanadium atom is connected to 4 oxygen atoms and every oxygen atom is connected to 2 vanadium atoms. In model 4, a=b= 4.551 Å and c= 2.851 Å; in model 5, a=b=c= 3.468 Å; and in model 6, a=b=c= 3.171 Å. We have searched for a crossing point in the band structure of all the models. In model 1 there is a point at which five bands appear to meet but the gap is 7.3 meV. In model 2 there is a crossing point between G and F points and there is a point between F and Q with the gap ≈ 3.6608 meV. In model 3, the gap is very small, ~ 10-5 eV. In model 4, the gap is 5.25 meV. In model 5, the gap between Z and G points is 2.035 meV, and in model 6 the gap at Z point is 4.3175 meV. The crossing point in model 2 looks like one line is bent so that the supersymmetry is broken. When pseudopotentials are replaced by a full band calculation, the crossing point changes into a gap of 2.72 x 10-4 eV.

  6. Directed synthesis of bio-inorganic vanadium oxide composites using genetically modified filamentous phage

    International Nuclear Information System (INIS)

    Mueller, Michael; Baik, Seungyun; Jeon, Hojeong; Kim, Yuchan; Kim, Jungtae; Kim, Young Jun

    2015-01-01

    Highlights: • Phage is an excellent seeding for bio-templates for environmentally benign vanadium oxide nanocomposite synthesis. • The synthesized bio-inorganic vanadium oxide showed photodegradation activities. • The fabricated wt phage/vanadium oxide composite exhibited bundle-like structure. • The fabricated RSTB-phage/vanadium oxide composite exhibited a ball with a fiber-like nanostructure. • The virus/vanadium oxide composite could be applied in photocatalysts, sensors and nanoelectronic applications. - Abstract: The growth of crystalline vanadium oxide using a filamentous bacteriophage template was investigated using sequential incubation in a V 2 O 5 precursor. Using the genetic modification of the bacteriophage, we displayed two cysteines that constrained the RSTB-1 peptide on the major coat protein P8, resulting in vanadium oxide crystallization. The phage-driven vanadium oxide crystals with different topologies, microstructures, photodegradation and vanadium oxide composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), quartz microbalance and dissipation (QCM-D) and X-ray photoelectron spectroscopy (XPS). Non-specific electrostatic attraction between a wild-type phage (wt-phage) and vanadium cations in the V 2 O 5 precursor caused phage agglomeration and fiber formation along the length of the viral scaffold. As a result, the addition of recombinant phage (re-phage) in V 2 O 5 precursors formed heterogeneous structures, which led to efficient condensation of vanadium oxide crystal formation in lines, shown by QCM-D analysis. Furthermore, re-phage/V x O x composites showed significantly enhanced photodegradation activities compared with the synthesized wt-phage-V 2 O 5 composite under illumination. This study demonstrates that peptide-mediated vanadium oxide mineralization is governed by a complicated interplay of peptide sequence, local structure, kinetics and the presence of a mineralizing

  7. SELECTIVE OXIDATION OF ALCOHOLS OVER VANADIUM PHOSPHORUS OXIDE CATALYST USING HYDROGEN PEROXIDE

    Science.gov (United States)

    Oxidation of various alcohols is studied in liquid phase under nitrogen atmosphere over vanadium phosphorus oxide catalyst in an environmentally friendly protocol using hydrogen peroxide. The catalyst and the method are found to be suitable for the selective oxidation of a variet...

  8. Montroseite, a new vanadium oxide from the Colorado plateaus

    Science.gov (United States)

    Weeks, Alice D.; Cisney, Evelyn A.; Sherwood, Alexander M.

    1953-01-01

    Montroseite, a new vanadium mineral named from Montrose County, Colorado, has been found in four mines in western Colorado and in two mines in eastern Utah. It is black, opaque, submetallic, and occurs in microscopic bladed crystals of the orthorhombic dipyramidal class. The axial ratio is a:b:c = 0.509:1:0.310, the common forms are b {010}, m {110}, p {121}, and a large vicinal form is approximately {0, 10, 1}. The observed specific gravity is 4.0 and the calculated specific gravity is 4.15. The composition is essentially VO(OH), with some iron commonly substituted for vanadium. Partial oxidation to VO2 has taken place. Chemical analyses and X-ray diffraction data are given. Single crystal study indicated that the space group symmetry is Pbnm(D2h16).

  9. Structural and silver/vanadium ratio effects on silver vanadium phosphorous oxide solution formation kinetics: impact on battery electrochemistry.

    Science.gov (United States)

    Bock, David C; Takeuchi, Kenneth J; Marschilok, Amy C; Takeuchi, Esther S

    2015-01-21

    The detailed understanding of non-faradaic parasitic reactions which diminish battery calendar life is essential to the development of effective batteries for use in long life applications. The dissolution of cathode materials including manganese, cobalt and vanadium oxides in battery systems has been identified as a battery failure mechanism, yet detailed dissolution studies including kinetic analysis are absent from the literature. The results presented here provide a framework for the quantitative and kinetic analyses of the dissolution of cathode materials which will aid the broader community in more fully understanding this battery failure mechanism. In this study, the dissolution of silver vanadium oxide, representing the primary battery powering implantable cardioverter defibrillators (ICD), is compared with the dissolution of silver vanadium phosphorous oxide (Ag(w)VxPyOz) materials which were targeted as alternatives to minimize solubility. This study contains the first kinetic analyses of silver and vanadium solution formation from Ag0.48VOPO4·1.9H2O and Ag2VP2O8, in a non-aqueous battery electrolyte. The kinetic results are compared with those of Ag2VO2PO4 and Ag2V4O11 to probe the relationships among crystal structure, stoichiometry, and solubility. For vanadium, significant dissolution was observed for Ag2V4O11 as well as for the phosphate oxide Ag0.49VOPO4·1.9H2O, which may involve structural water or the existence of multiple vanadium oxidation states. Notably, the materials from the SVPO family with the lowest vanadium solubility are Ag2VO2PO4 and Ag2VP2O8. The low concentrations and solution rates coupled with their electrochemical performance make these materials interesting alternatives to Ag2V4O11 for the ICD application.

  10. Tuning the conductivity of vanadium dioxide films on silicon by swift heavy ion irradiation

    Directory of Open Access Journals (Sweden)

    H. Hofsäss

    2011-09-01

    Full Text Available We demonstrate the generation of a persistent conductivity increase in vanadium dioxide thin films grown on single crystal silicon by irradiation with 1 GeV 238U swift heavy ions at room temperature. VO2 undergoes a temperature driven metal-insulator-transition (MIT at 67 °C. After room temperature ion irradiation with high electronic energy loss of 50 keV/nm the conductivity of the films below the transition temperature is strongly increased proportional to the ion fluence of 5·109 U/cm2 and 1·1010 U/cm2. At high temperatures the conductivity decreases slightly. The ion irradiation slightly reduces the MIT temperature. This observed conductivity change is persistent and remains after heating the samples above the transition temperature and subsequent cooling. Low temperature measurements down to 15 K show no further MIT below room temperature. Although the conductivity increase after irradiation at such low fluences is due to single ion track effects, atomic force microscopy (AFM measurements do not show surface hillocks, which are characteristic for ion tracks in other materials. Conductive AFM gives no evidence for conducting ion tracks but rather suggests the existence of conducting regions around poorly conducting ion tracks, possible due to stress generation. Another explanation of the persistent conductivity change could be the ion-induced modification of a high resistivity interface layer formed during film growth between the vanadium dioxide film and the n-Silicon substrate. The swift heavy ions may generate conducting filaments through this layer, thus increasing the effective contact area. Swift heavy ion irradiation can thus be used to tune the conductivity of VO2 films on silicon substrates.

  11. DNA damage induction in human cells exposed to vanadium oxides in vitro.

    Science.gov (United States)

    Rodríguez-Mercado, Juan J; Mateos-Nava, Rodrigo A; Altamirano-Lozano, Mario A

    2011-12-01

    Vanadium and vanadium salts cause genotoxicity and elicit variable biological effects depending on several factors. In the present study, we analyzed and compared the DNA damage and repair processes induced by vanadium in three oxidation states. We used human blood leukocytes in vitro and in a single cell gel electrophoresis assay at two pH values. We observed that vanadium(III) trioxide and vanadium(V) pentoxide produced DNA single-strand breaks at all of the concentrations (1, 2, 4, or 8 μg/ml) and treatment times (2, 4, or 6 h) tested. Vanadium(IV) tetraoxide treatment significantly increased DNA damage at all concentrations for 4 or 6 h of treatment but not for 2 h of treatment. The DNA repair kinetics indicated that most of the cells exposed to vanadium III and V for 4 h recovered within the repair incubation time of 90 min; however, those exposed to vanadium(IV) repaired their DNA within 120 min. The data at pH 9 indicated that vanadium(IV) tetraoxide induced DNA double-strand breaks. Our results show that the genotoxic effect of vanadium can be produced by any of its three oxidation states. However, vanadium(IV) induces double-strand breaks, and it is known that these lesions are linked with forming structural chromosomal aberrations. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Oxidation of vanadium metal in oxygen plasma and their characterizations

    Directory of Open Access Journals (Sweden)

    Rabindar Kumar Sharma

    2015-09-01

    Full Text Available In this report, the role of oxygen plasma on oxidation of vanadium (V metal and the volatilization of its oxides has been studied as a function of source (V metal strip temperature (Tss and oxygen partial pressure (PO2. The presence of O2-plasma not only enhances the oxidation rate but also ficilitates in transport of oxide molecules from metal to substrate, as confirmed by the simultanous deposition of oxide film onto substrate. Both the oxidized metal strips and oxide films deposited on substrates are characterized separately. The structural and vibrational results evidence the presence of two different oxide phases (i.e. orthorhombic V2O5 and monocilinic V O2 in oxide layers formed on V metal strips, whereas the oxide films deposited on substrates exhibit only orthorhombic phase (i.e. V2O5. The decrease in peak intensities recorded from heated V metal strips on increasing Tss points out the increment in the rate of oxide volatilization, which also confirms by the oxide layer thickness measurements. The SEM results show the noticeable surface changes on V-strips as the function of Tss and PO2 and their optimum values are recorded to be 500   ˚ C and 7.5 × 10−2 Torr, respectively to deposit maximum thick oxide film on substrate. The formation of microcracks on oxidized V-strips, those responsible to countinue oxidation is also confirmed by SEM results. The compositional study of oxide layers formed on V-strips, corroborates their pureness and further assures about the existence of mixed oxide phases. The effect of oxygen partial pressure on oxidation of V-metal has also been discussed in the present report. All the results are well in agreement to each other.

  13. Oxidation of vanadium metal in oxygen plasma and their characterizations

    Science.gov (United States)

    Sharma, Rabindar Kumar; Singh, Megha; Kumar, Prabhat; Reddy, G. B.

    2015-09-01

    In this report, the role of oxygen plasma on oxidation of vanadium (V) metal and the volatilization of its oxides has been studied as a function of source (V metal strip) temperature (Tss) and oxygen partial pressure (PO2). The presence of O2-plasma not only enhances the oxidation rate but also ficilitates in transport of oxide molecules from metal to substrate, as confirmed by the simultanous deposition of oxide film onto substrate. Both the oxidized metal strips and oxide films deposited on substrates are characterized separately. The structural and vibrational results evidence the presence of two different oxide phases (i.e. orthorhombic V2O5 and monocilinic V O2) in oxide layers formed on V metal strips, whereas the oxide films deposited on substrates exhibit only orthorhombic phase (i.e. V2O5). The decrease in peak intensities recorded from heated V metal strips on increasing Tss points out the increment in the rate of oxide volatilization, which also confirms by the oxide layer thickness measurements. The SEM results show the noticeable surface changes on V-strips as the function of Tss and PO2 and their optimum values are recorded to be 500 ˚ C and 7.5 × 10-2 Torr, respectively to deposit maximum thick oxide film on substrate. The formation of microcracks on oxidized V-strips, those responsible to countinue oxidation is also confirmed by SEM results. The compositional study of oxide layers formed on V-strips, corroborates their pureness and further assures about the existence of mixed oxide phases. The effect of oxygen partial pressure on oxidation of V-metal has also been discussed in the present report. All the results are well in agreement to each other.

  14. VANADIUM PHOSPHORUS OXIDE AS AN EFFICIENT CATALYST FOR HYDROCARBON OXIDATIONS USING HYDROGEN PEROXIDE

    Science.gov (United States)

    Calcined vanadium phosphorus oxide (VPO) prepared by an organic route is found to be an efficient catalyst for the oxidation of various alkanes such as cyclopentane, cyclohexane, n-hexane, cycloheptane, cyclooctane, cyclodecane and adamantane in acetonitrile solvent using the env...

  15. Hysteresis Phenomena in Sulfur Dioxide Oxidation over Supported Vanadium Catalysts

    DEFF Research Database (Denmark)

    Masters, Stephen G.; Eriksen, Kim Michael; Fehrmann, Rasmus

    1997-01-01

    Catalyst deactivation and hysteresis behavior in industrial SO2-oxidation catalysts have been studied in the temperature region 350-480 C by combined in situ EPR spectroscopy and catalytic activity measurements. The feed gas composition simulated sulfuric acid synthesis gas and wet/dry deNOx'ed f......NOx'ed flue gas. The vanadium (IV) compound K4(VO)3(SO4)5 precipitated during all the investigated conditions hence causing catalyst deactivation. Hysteresis behavior of both the catalytic activity and the V(IV) content was observed during reheating....

  16. Low temperature electrolytes for lithium/silver vanadium oxide cells

    Science.gov (United States)

    Tuhovak, Denise R.; Takeuchi, Esther S.

    1991-01-01

    Combinations of methyl formate (MF) and propylene carbonate (PC) using salt concentrations of 0.6 to 2.4 M, with lithium hexafluoroarsenate and lithium tetrafluoroborate in a five to one molar ratio, were investigated as electrolytes in lithium/silver vanadium oxide batteries. The composition of the electrolyte affected cell performance at low temperature, self-discharge and abuse resistance as characterized by short circuit and crush testing. The electrolyte that provided the best combination of good low temperature performance, low cell self-discharge and abuse resistance was 0.6 M salt in 10:90 PC/MF.

  17. Study of propane partial oxidation on vanadium-containing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Komashko, G.A.; Khalamejda, S.V.; Zazhigalov, V.A. [AN Ukrainskoj SSR, Kiev (Ukraine). Inst. Fizicheskoj Khimii

    1998-12-31

    The present results indicate that maximum selectivity to acrylic acid can be reached over V-P-Zr-O catalysts. When the hydrocarbon concentration is 5.1 vol.% the selectivity is about 30% at quite high paraffin conversion. Conclusively, some explanations to the observed facts can be given. The V-P-O catalyst promotion with lanthanum by means of mechanochemical treatment is distinguished by the additive uniform spreading all over the matrix surface. Such twophase system is highly active in propane conversion (lanthanum oxide) and further oxidation of the desired products. The similar properties are attributed to V-P-Bi-La-O catalyst. Bismuth, tellurium and zirconium additives having clearly defined acidic properties provoke the surface acidity strengthening and make easier desorption of the acidic product (acrylic acid) from the surface lowering its further oxidation. Additionally, since bismuth and zirconium are able to form phosphates and, according to, to create space limitations for the paraffin molecule movement out of the active group boundaries, this can be one more support in favour of the selectivity increase. With this point of view very interesting results were obtained. It has been shown that the more limited the size of the vanadium unit, the higher the selectivity is. Monoclinic phase AV{sub 2}P{sub 2}O{sub 10} which consists in clusters of four vanadium atoms is sensibly more reactive than the orthorhombic phase consists in V{sub {infinity}} infinite chains. (orig.)

  18. From molecular to colloidal manganese vanadium oxides for water oxidation catalysis.

    Science.gov (United States)

    Schwarz, Benjamin; Forster, Johannes; Anjass, Montaha H; Daboss, Sven; Kranz, Christine; Streb, Carsten

    2017-10-19

    The spontaneous, sonication-driven conversion of a molecular manganese vanadium oxide water oxidation catalyst, (n-Bu 4 N) 3 [Mn 4 V 4 O 17 (OAc) 3 ] × 3H 2 O, into colloidal manganese vanadium oxide particles (average particle size ca. 70 nm) together with their stability and chemical water oxidation activity is reported. The nanoparticulate metal oxide colloid (approximate composition: VMn 5 O 10 ·ca. 6H 2 O·ca. 0.2nBu 4 N + ) is formed spontaneously when the molecular precursor is sonicated in water. The particles show water oxidation activity when combined with Ce IV as the oxidant, are stable even under highly acidic reaction conditions and can be recovered and reused.

  19. Visualizing atomic-scale redox dynamics in vanadium oxide-based catalysts.

    Science.gov (United States)

    Ek, Martin; Ramasse, Quentin M; Arnarson, Logi; Georg Moses, Poul; Helveg, Stig

    2017-08-21

    Surface redox processes involving oxygen atom exchange are fundamental in catalytic reactions mediated by metal oxides. These processes are often difficult to uncover due to changes in the surface stoichiometry and atomic arrangement. Here we employ high-resolution transmission electron microscopy to study vanadium oxide supported on titanium dioxide, which is of relevance as a catalyst in, e.g., nitrogen oxide emission abatement for environmental protection. The observations reveal a reversible transformation of the vanadium oxide surface between an ordered and disordered state, concomitant with a reversible change in the vanadium oxidation state, when alternating between oxidizing and reducing conditions. The transformation depends on the anatase titanium dioxide surface termination and the vanadium oxide layer thickness, suggesting that the properties of vanadium oxide are sensitive to the supporting oxide. These atomic-resolution observations offer a basis for rationalizing previous reports on shape-sensitive catalytic properties.Redox processes in metal oxide surfaces can exhibit structure sensitivities which are difficult to uncover. Here, the authors use atomic-resolution imaging to demonstrate facet dependent alterations in the surfaces of supported vanadium oxide upon reduction and oxidation.

  20. A structurally characterized nitrous oxide complex of vanadium.

    Science.gov (United States)

    Piro, Nicholas A; Lichterman, Michael F; Harman, W Hill; Chang, Christopher J

    2011-02-23

    Nitrous oxide (N(2)O), a widespread greenhouse gas, is a thermodynamically potent and environmentally green oxidant that is an attractive target for activation by metal centers. However, N(2)O remains underutilized owing to its high kinetic stability, and the poor ligand properties of this molecule have made well-characterized metal-N(2)O complexes a rarity. We now report a vanadium-pyrrolide system that reversibly binds N(2)O at room temperature and provide the first single-crystal X-ray structure of such a complex. Further characterization by vibrational spectroscopy and DFT calculations strongly favor assignment as a linear, N-bound metal-N(2)O complex.

  1. Phase Stability and Transformations in Vanadium Oxide Nanocrystals

    Science.gov (United States)

    Bergerud, Amy Jo

    Vanadium oxides are both fascinating and complex, due in part to the many compounds and phases that can be stabilized as well as the phase transformations which occur between them. The metal to insulator transitions (MITs) that take place in vanadium oxides are particularly interesting for both fundamental and applied study as they can be induced by a variety of stimuli ( i.e., temperature, pressure, doping) and utilized in many applications (i.e., smart windows, sensors, phase change memory). Nanocrystals also tend to demonstrate interesting phase behavior, due in part to the enhanced influence of surface energy on material thermodynamics. Vanadium oxide nanocrystals are thus expected to demonstrate very interesting properties in regard to phase stability and phase transformations, although synthesizing vanadium oxides in nanocrystal form remains a challenge. Vanadium sesquioxide (V2O3) is an example of a material that undergoes a MIT. For decades, the low temperature monoclinic phase and high temperature corundum phase were the only known crystal structures of V2O3. However, in 2011, a new metastable polymorph of V2O3 was reported with a cubic, bixbyite crystal structure. In Chapter 2, a colloidal route to bixbyite V2O 3 nanocrystals is presented. In addition to being one of the first reported observations of the bixbyite phase in V2O3, it is also one of the first successful colloidal syntheses of any of the vanadium oxides. The nanocrystals possess a flower-like morphology, the size and shape of which are dependent on synthesis time and temperature, respectively. An aminolysis reaction mechanism is determined from Fourier transform infrared spectroscopy data and the bixbyite crystal structure is confirmed by Rietveld refinement of X-ray diffraction (XRD) data. Phase stability is assessed in both air and inert environments, confirming the metastable nature of the material. Upon heating in an inert atmosphere above 700°C, the nanocrystals irreversibly transform

  2. Investigation on the pure and fluorine doped vanadium oxide thin films deposited by spray pyrolysis method

    Energy Technology Data Exchange (ETDEWEB)

    Margoni, Mudaliar Mahesh; Mathuri, S. [Crystal Growth and Thin Film Laboratory, Department of Physics and Nanotechnology, Faculty of Engineering and Technology, SRM University, Kattankulathur, – 603203 Kancheepuram Dt., Tamil Nadu (India); Ramamurthi, K., E-mail: krmurthin@yahoo.co.in [Crystal Growth and Thin Film Laboratory, Department of Physics and Nanotechnology, Faculty of Engineering and Technology, SRM University, Kattankulathur, – 603203 Kancheepuram Dt., Tamil Nadu (India); Babu, R. Ramesh [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli – 620024, Tamil Nadu (India); Sethuraman, K. [School of Physics, Madurai Kamaraj University, Madurai – 625021, Tamil Nadu (India)

    2016-05-01

    Vanadium oxide and fluorine doped vanadium oxide thin films were deposited on the micro-slide glass substrates at 400 °C by spray pyrolysis technique. Vanadium oxide films were deposited using 0.1 M ammonium meta vanadate aqua solution. Precursor solution used to deposit fluorine doped vanadium oxide films was prepared adding separately 5 wt.%, 10 wt.%, 15 wt.% and 20 wt.% of ammonium fluoride with the 0.1 M ammonium meta vanadate aqua solution. X-ray diffraction results showed that the films are in mixed phases of β-V{sub 2}O{sub 5}, V{sub 2}O{sub 5} and V{sub 3}O{sub 7}. Surface morphology and band gap of these films were modified due to different levels of fluorine doping. The average visible transmittance (500–800 nm) of vanadium oxide films is decreased due to low level concentration of fluorine doping. - Highlights: • Addition of a few ml HCl yielded clear precursor aqua solution. • F doped vanadium oxide films were deposited for less concentration of fluorine. • Low level fluorine doping modified the surface morphology of the thin films. • Direct band gap of vanadium oxide film is slightly increased by fluorine doping.

  3. Controlled release of vanadium from titanium oxide coatings for improved integration of soft tissue implants.

    Science.gov (United States)

    Jarrell, John D; Dolly, Brandon; Morgan, Jeffrey R

    2009-07-01

    This study evaluates the potential of titanium oxide coatings for short-term delivery of vanadium for improved wound healing around implants. Titanium and vanadium oxides are bioactive agents that elicit different bioresponses in cells, ranging from implant integration and reduction of inflammation to modulation of cell proliferation and morphology. These oxides were combined in biomaterial coatings using metal-organic precursors and rapidly screened in cell-culture microplates to establish how vanadium-loading influences cell proliferation and morphology. Twenty-eight-day elution studies indicated that there was a controlled release of vanadium from stable titanium oxide matrices. Elution profiles were mathematically modeled for vanadium loading of 20-1.25% up to a period of 28 days. Scanning electron microscopy and energy dispersive spectroscopy of the coatings indicated that the vanadium was present as a nanoscale dispersion and not segregated micron-scale islands. The study confirmed that the observed bioresponse of cells was modulated by the soluble release of vanadium into the surrounding medium. Controlled release of vanadium from titania coatings may be used to influence soft-tissue integration of implants by modulating cell proliferation, attachment, inflammation, and wound healing dynamics.

  4. Directed synthesis of bio-inorganic vanadium oxide composites using genetically modified filamentous phage

    Science.gov (United States)

    Mueller, Michael; Baik, Seungyun; Jeon, Hojeong; Kim, Yuchan; Kim, Jungtae; Kim, Young Jun

    2015-05-01

    The growth of crystalline vanadium oxide using a filamentous bacteriophage template was investigated using sequential incubation in a V2O5 precursor. Using the genetic modification of the bacteriophage, we displayed two cysteines that constrained the RSTB-1 peptide on the major coat protein P8, resulting in vanadium oxide crystallization. The phage-driven vanadium oxide crystals with different topologies, microstructures, photodegradation and vanadium oxide composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), quartz microbalance and dissipation (QCM-D) and X-ray photoelectron spectroscopy (XPS). Non-specific electrostatic attraction between a wild-type phage (wt-phage) and vanadium cations in the V2O5 precursor caused phage agglomeration and fiber formation along the length of the viral scaffold. As a result, the addition of recombinant phage (re-phage) in V2O5 precursors formed heterogeneous structures, which led to efficient condensation of vanadium oxide crystal formation in lines, shown by QCM-D analysis. Furthermore, re-phage/VxOx composites showed significantly enhanced photodegradation activities compared with the synthesized wt-phage-V2O5 composite under illumination. This study demonstrates that peptide-mediated vanadium oxide mineralization is governed by a complicated interplay of peptide sequence, local structure, kinetics and the presence of a mineralizing aid, such as the two cysteine-constrained peptides on the phage surface, and has potential for use in nanotechnology applications.

  5. Protective effects of Sesamum indicum extract against oxidative stress induced by vanadium on isolated rat hepatocytes.

    Science.gov (United States)

    Hosseini, Mir-Jamal; Shahraki, Jafar; Tafreshian, Saman; Salimi, Ahmad; Kamalinejad, Mohammad; Pourahmad, Jalal

    2016-08-01

    Vanadium toxicity is a challenging problem to human and animal health with no entirely understanding cytotoxic mechanisms. Previous studies in vanadium toxicity showed involvement of oxidative stress in isolated liver hepatocytes and mitochondria via increasing of ROS formation, release of cytochrome c and ATP depletion after incubation with different concentrations (25-200 µM). Therefore, we aimed to investigate the protective effects of Sesamum indicum seed extract (100-300 μg/mL) against oxidative stress induced by vanadium on isolated rat hepatocytes. Our results showed that quite similar to Alpha-tocopherol (100 µM), different concentrations of extract (100-300 μg/mL) protected the isolated hepatocyte against all oxidative stress/cytotoxicity markers induced by vanadium in including cell lysis, ROS generation, mitochondrial membrane potential decrease and lysosomal membrane damage. Besides, vanadium induced mitochondrial/lysosomal toxic interaction and vanadium reductive activation mediated by glutathione in vanadium toxicity was significantly (P Sesamum indicum extracts. These findings suggested a hepato-protective role for extracts against liver injury resulted from vanadium toxicity. © 2015 Wiley Periodicals, Inc. Environ Toxicol 31: 979-985, 2016. © 2015 Wiley Periodicals, Inc.

  6. Directed synthesis of bio-inorganic vanadium oxide composites using genetically modified filamentous phage

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Michael; Baik, Seungyun [Environmental Safety Group, Korea Institute of Science and Technology Europe (KIST-Europe) Forschungsgesellschaft mbH, Campus E 7 1, Saarbruecken (Germany); Jeon, Hojeong; Kim, Yuchan [Center for Biomaterials, Biomedical Research Institute Korea Institute of Science and Technology (KIST), Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Kim, Jungtae [Environmental Safety Group, Korea Institute of Science and Technology Europe (KIST-Europe) Forschungsgesellschaft mbH, Campus E 7 1, Saarbruecken (Germany); Kim, Young Jun, E-mail: youngjunkim@kist-europe.de [Environmental Safety Group, Korea Institute of Science and Technology Europe (KIST-Europe) Forschungsgesellschaft mbH, Campus E 7 1, Saarbruecken (Germany)

    2015-05-15

    Highlights: • Phage is an excellent seeding for bio-templates for environmentally benign vanadium oxide nanocomposite synthesis. • The synthesized bio-inorganic vanadium oxide showed photodegradation activities. • The fabricated wt phage/vanadium oxide composite exhibited bundle-like structure. • The fabricated RSTB-phage/vanadium oxide composite exhibited a ball with a fiber-like nanostructure. • The virus/vanadium oxide composite could be applied in photocatalysts, sensors and nanoelectronic applications. - Abstract: The growth of crystalline vanadium oxide using a filamentous bacteriophage template was investigated using sequential incubation in a V{sub 2}O{sub 5} precursor. Using the genetic modification of the bacteriophage, we displayed two cysteines that constrained the RSTB-1 peptide on the major coat protein P8, resulting in vanadium oxide crystallization. The phage-driven vanadium oxide crystals with different topologies, microstructures, photodegradation and vanadium oxide composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), quartz microbalance and dissipation (QCM-D) and X-ray photoelectron spectroscopy (XPS). Non-specific electrostatic attraction between a wild-type phage (wt-phage) and vanadium cations in the V{sub 2}O{sub 5} precursor caused phage agglomeration and fiber formation along the length of the viral scaffold. As a result, the addition of recombinant phage (re-phage) in V{sub 2}O{sub 5} precursors formed heterogeneous structures, which led to efficient condensation of vanadium oxide crystal formation in lines, shown by QCM-D analysis. Furthermore, re-phage/V{sub x}O{sub x} composites showed significantly enhanced photodegradation activities compared with the synthesized wt-phage-V{sub 2}O{sub 5} composite under illumination. This study demonstrates that peptide-mediated vanadium oxide mineralization is governed by a complicated interplay of peptide sequence, local structure

  7. Chemical stability and surface stoichiometry of vanadium oxide phases studied by reactive molecular dynamics simulations

    Science.gov (United States)

    Jeon, Byoungseon; Ko, Changhyun; van Duin, Adri C. T.; Ramanathan, Shriram

    2012-02-01

    Compositional stability of various vanadium oxides and oxide growth on vanadium surfaces have been studied using reactive molecular dynamics simulation methods. Vanadium dioxide (VO2), sesquioxide (V2O3), pentoxide (V2O5), and hexavanadium tridecaoxide (V6O13) are studied in bulk crystalline and thin film structures, investigating charge distribution and pair distribution functions of particle interactions. The stability is estimated to be pentoxide, hexavanadium tridecaoxide, sesquioxide, and dioxide respectively in decreasing order in thin film structures. We then analyze oxide growth kinetics on vanadium (100) and (110) surfaces. The oxidation rate, stoichiometry, charge distribution, and the effect of surface orientation on kinetic phenomena are noted. In the early stages of surface oxidation of our simulation configurations, sesquioxide is found to be the dominant component. The modeling and simulation results are compared with experiments where available.

  8. High rate capability of lithium/silver vanadium oxide cells

    International Nuclear Information System (INIS)

    Takeuchi, E.S.; Zelinsky, M.A.; Keister, P.

    1986-01-01

    High rate characteristics of the lithium/silver vanadium oxide system were investigated in test cells providing four different limiting surface areas. The cells were tested by constant current and constant resistance discharge with current densities ranging from 0.04 to 6.4 mA/cm/sup 2/. The maximum current density under constant resistance and constant current discharges which would deliver 50% of theoretical capacity was determined. The ability of the cells to deliver high current pulses was evaluated by application of 10 second pulses with current densities ranging from 3 to 30 mA/cm/sup 2/. The voltage delay characteristics of the cells were determined after 1 to 3 months of storage at open circuit voltage or under low level background currents. The volumetric and gravimetric energy density of the SVO system is compared to other cathode materials

  9. Ab Initio Calculations of Transport Properties of Vanadium Oxides

    Science.gov (United States)

    Lamsal, Chiranjivi; Ravindra, N. M.

    2018-01-01

    The temperature-dependent transport properties of vanadium oxides have been studied near the Fermi energy using the Kohn-Sham band structure approach combined with Boltzmann transport equations. V2O5 exhibits significant thermoelectric properties, which can be attributed to its layered structure and stability. Highly anisotropic electrical conduction in V2O5 is clearly manifested in the calculations. Due to specific details of the band structure and anisotropic electron-phonon interactions, maxima and crossovers are also seen in the temperature-dependent Seebeck coefficient of V2O5. During the phase transition of VO2, the Seebeck coefficient changes by 18.9 µV/K, which is close to (within 10% of) the observed discontinuity of 17.3 µV/K.

  10. Low temperature performance of lithium/silver vanadium oxide cells

    Science.gov (United States)

    Takeuchi, E. S.; Tuhovak, D. R.; Post, C. J.

    1990-01-01

    Lithium/silver vanadium oxide cells for low temperature applications have been developed. Prismatic and spirally wound AA cells were tested under constant load discharge of 0.3 to 1.8 amps or pulse discharge of 0.225 or 1.0 amps at temperatures from -40 to 25 C. At -40 C with current densities of 2.5 mA/cm2, 23 percent of theoretical capacity was achieved under constant load discharge and 40 percent of theoretical capacity was achieved under pulse test. Self-discharge estimates of 0.7 percent per year at 25 C were obtained from microcalorimetry. Preliminary safety testing of the cells revealed no violent performance under short circuit or crush tests.

  11. Partial Oxidation of n-Butane over a Sol-Gel Prepared Vanadium Phosphorous Oxide

    Directory of Open Access Journals (Sweden)

    Juan M. Salazar

    2013-01-01

    Full Text Available Vanadium phosphorous oxide (VPO is traditionally manufactured from solid vanadium oxides by synthesizing VOHPO4∙0.5H2O (the precursor followed by in situ activation to produce (VO2P2O7 (the active phase. This paper discusses an alternative synthesis method based on sol-gel techniques. Vanadium (V triisopropoxide oxide was reacted with ortho-phosphoric acid in an aprotic solvent. The products were dried at high pressure in an autoclave with a controlled excess of solvent. This procedure produced a gel of VOPO4 with interlayer entrapped molecules. The surface area of the obtained materials was between 50 and 120 m2/g. Alcohol produced by the alkoxide hydrolysis reduced the vanadium during the drying step, thus VOPO4 was converted to the precursor. This procedure yielded non-agglomerated platelets, which were dehydrated and evaluated in a butane-air mixture. Catalysts were significantly more selective than the traditionally prepared materials with similar intrinsic activity. It is suggested that the small crystallite size obtained increased their selectivity towards maleic anhydride.

  12. Processing, characterization, and bactericidal activity of undoped and silver-doped vanadium oxides

    International Nuclear Information System (INIS)

    Tousley, M.E.; Wren, A.W.; Towler, M.R.; Mellott, N.P.

    2012-01-01

    Vanadium oxide (V) and silver-doped vanadium oxide (Ag-V) powders were prepared via sol–gel processing. Structural evolution and bactericidal activity was examined as a function of temperature ranging from 250, 350, 450 and 550 °C. Powders were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Raman spectroscopy. Results from all techniques showed vanadium pentoxide (V 2 O 5 ) is the predominant phase regardless of heat treatment temperature or the addition of silver (Ag). XRD analysis suggests Ag is present as AgCl in samples heat treated to 250, 350, and 450 °C and as AgV 6 O 15 at 550 °C. Bactericidal activity was evaluated against Escherichia coli using the agar disk diffusion method considering both Ag-V and undoped, V powders. While the addition of Ag significantly increased bactericidal properties, the specific Ag valency, or crystal structure and morphology formed at higher temperatures, had little effect on functionality. -- Highlights: ► Vanadium and silver-doped vanadium oxide powders were prepared via sol–gel. ► Powders were characterized using advanced, complementary structural techniques. ► Bactericidal activity was evaluated against E. coli. ► Both vanadium and silver doped vanadium oxide show bactericidal activity.

  13. Radiation modification of vanadium catalyst for anthracene oxidation

    International Nuclear Information System (INIS)

    Norek, J.; Vymetal, J.; Mucka, V.; Pospisil, M.; Cabicar, J.

    1985-01-01

    Vanadium pentoxide on a suitable carrier is often used as catalyst for the oxidation of anthracene in the gaseous phase to 9,10-anthraquinone. The activity and selectivity of the catalyst may be affected by irradiation. The effects were studied of gamma radiation on the properties of the catalyst where the active system was a V 2 O 5 -KOH-K 2 SO 4 mixture on a Al 2 O 3 +SiO 2 carrier. The 60 Co radiation source had an activity of 185 TBq; the carrier of the catalyst was irradiated at a dose rate of 3.05, 1.98 and 0.084 kGy/h to a total dose of 10 kGy. Irradiation increased the selectivity of the catalyst such that in the oxidation temperature optimum of 300 to 400 degC the yield of 9,10-anthraquinone increased by 4.6 to 4.8 %mol. to roughly 90 %mol.; a significant reduction of the content of acid components (phthalanhydride) in the oxidation product also occurred. This effect remained unchanged for 5 months after irradiation. A reduction of selectivity was observed at lower dose rates only in the temperature range between 400 and 480 degC. (A.K.)

  14. HYDROCARBON OXIDATION OVER VANADIUM PHOSPHORUS OXIDE CATALYST USING HYDROGEN PEROXIDE

    Science.gov (United States)

    Selective oxidation of hydrocarbons is one of the very important and challenging areas in industrial chemistry due to the wide ranging utility of the resulting oxygenates in fine chemical synthesis. Most of the existing processes for their oxidations employ toxic and often stoich...

  15. Influence of vanadium oxidation states on the performance of V-Mg-Al mixed-oxide catalysts for the oxidative dehydrogenation of propane

    Energy Technology Data Exchange (ETDEWEB)

    Schacht, L. [IPN, Escuela Superior de Fisica y Matematicas, Departamento de Ciencia de Materiales, Av. IPN s/n, Edificio 9, Col. Lindavista, 07738 Mexico D. F. (Mexico); Navarrete, J.; Schacht, P.; Ramirez, M. A., E-mail: pschacha@imp.m [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas No. 152, 07730 Mexico D. F. (Mexico)

    2010-07-01

    V-Mg-Al mixed-oxide catalysts for oxidative dehydrogenation of propane were prepared by thermal decomposition of Mg-Al-layered double hydroxides with vanadium interlayer doping. The obtained catalysts were tested for the oxidative dehydrogenation of propane, obtaining good results in catalytic activity (conversion 16.55 % and selectivity 99.97 %) Results indicated that catalytic performance of these materials depends on how vanadium is integrated in the layered structure, which is determined by the Mg/Al ratio. Vanadium interlayer doping modifies the oxidation state of vanadium and consequently catalytic properties. Surface properties were studied by X-ray photoelectron spectroscopic and diffuse reflectance, UV-visible spectroscopy, and temperature programmed reduction. The analyses provided information about the oxidation state, before and after the reaction. From these results, it is suggested that selectivity to propylene and catalytic activity depend mainly of vanadium oxidation state. (Author)

  16. Lithium-Vanadium bronzes as model catalysts for the selective reduction of nitric oxide

    NARCIS (Netherlands)

    Bosch, H.; Bongers, Annemie; Enoch, Gert; Snel, Ruud; Ross, Julian R.H.

    1989-01-01

    The effect of alkali metals on the selective reduction of nitric oxide with ammonia has been studied on bulk iron oxide and bulk vanadium oxide. The influence of additions of LiOH, NaOH and KOH on the activity was screened by pulse experiments carried out in the absence of gaseous oxygen; FTIR

  17. Sputter-deposited low reflectance vanadium oxide-molybdenum oxide thin films on silicon

    Science.gov (United States)

    Nayak, Manish Kumar; Esther, A. Carmel Mary; Bera, Parthasarathi; Dey, Arjun

    2017-09-01

    A single layer antireflective, smart, crystalline and nanocolumnar pulsed RF magnetron sputtered vanadium oxide-molybdenum oxide thin film on silicon is proposed for the alternate antireflective material for silicon based futuristic solar cell application. The VO-MO film with 130 nm thickness grown at 200 W shows significant low reflectance (1% within the 500-600 nm region). The VO-MO film with lowest reflectance shows a phase transition at around 55 °C which is beneficial due to film inherent variable IR emittance behaviour which may be helpful for eliminating excess heat load generated during in-service of silicon solar cell.

  18. Comparative ion insertion study into a nanostructured vanadium oxide in aqueous salt solutions

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Q.; Ren, S. L.; Zukowski, J.; Pomeroy, M.; Soghomonian, V., E-mail: soghomon@vt.edu [Department of Physics, Virginia Tech, Blacksburg, Virginia 24061 (United States)

    2014-07-07

    We present a comparative study for the electrochemical insertion of different cations into a nanostructured vanadium oxide material. The oxide is hydrothemally synthesized and electrically characterized by variable temperature measurements. The electrochemical reactions are performed in aqueous chloride solutions of lithium, sodium, potassium, and ammonium, and the electrochemical behavior of various cycles are correlated with visual changes in the vanadium oxide nanosheets as observed by scanning electron microscopy. We note an increase in the specific charge per cycle in the cases of sodium and ammonium ions only, correlated with minimal physical changes to the nanosheets. The differing behavior of the various ions has implications for their use in electrical energy storage applications.

  19. Nanocolumnar Crystalline Vanadium Oxide-Molybdenum Oxide Antireflective Smart Thin Films with Superior Nanomechanical Properties.

    Science.gov (United States)

    Dey, Arjun; Nayak, Manish Kumar; Esther, A Carmel Mary; Pradeepkumar, Maurya Sandeep; Porwal, Deeksha; Gupta, A K; Bera, Parthasarathi; Barshilia, Harish C; Mukhopadhyay, Anoop Kumar; Pandey, Ajoy Kumar; Khan, Kallol; Bhattacharya, Manjima; Kumar, D Raghavendra; Sridhara, N; Sharma, Anand Kumar

    2016-11-17

    Vanadium oxide-molybdenum oxide (VO-MO) thin (21-475 nm) films were grown on quartz and silicon substrates by pulsed RF magnetron sputtering technique by altering the RF power from 100 to 600 W. Crystalline VO-MO thin films showed the mixed phases of vanadium oxides e.g., V 2 O 5 , V 2 O 3 and VO 2 along with MoO 3 . Reversible or smart transition was found to occur just above the room temperature i.e., at ~45-50 °C. The VO-MO films deposited on quartz showed a gradual decrease in transmittance with increase in film thickness. But, the VO-MO films on silicon exhibited reflectance that was significantly lower than that of the substrate. Further, the effect of low temperature (i.e., 100 °C) vacuum (10 -5 mbar) annealing on optical properties e.g., solar absorptance, transmittance and reflectance as well as the optical constants e.g., optical band gap, refractive index and extinction coefficient were studied. Sheet resistance, oxidation state and nanomechanical properties e.g., nanohardness and elastic modulus of the VO-MO thin films were also investigated in as-deposited condition as well as after the vacuum annealing treatment. Finally, the combination of the nanoindentation technique and the finite element modeling (FEM) was employed to investigate yield stress and von Mises stress distribution of the VO-MO thin films.

  20. High reactivity of nanosized niobium oxide cluster cations in methane activation: A comparison with vanadium oxides.

    Science.gov (United States)

    Ding, Xun-Lei; Wang, Dan; Wu, Xiao-Nan; Li, Zi-Yu; Zhao, Yan-Xia; He, Sheng-Gui

    2015-09-28

    The reactions between methane and niobium oxide cluster cations were studied and compared to those employing vanadium oxides. Hydrogen atom abstraction (HAA) reactions were identified over stoichiometric (Nb2O5)N(+) clusters for N as large as 14 with a time-of-flight mass spectrometer. The reactivity of (Nb2O5)N(+) clusters decreases as the N increases, and it is higher than that of (V 2O5)N(+) for N ≥ 4. Theoretical studies were conducted on (Nb2O5)N(+) (N = 2-6) by density functional calculations. HAA reactions on these clusters are all favorable thermodynamically and kinetically. The difference of the reactivity with respect to the cluster size and metal type (Nb vs V) was attributed to thermodynamics, kinetics, the electron capture ability, and the distribution of the unpaired spin density. Nanosized Nb oxide clusters show higher HAA reactivity than V oxides, indicating that niobia may serve as promising catalysts for practical methane conversion.

  1. Theoretical study of the interaction between vanadium oxide and HY-Zeolite elucidating loss activity of the catalyst

    Directory of Open Access Journals (Sweden)

    Irineo Pedro Zaragoza

    2017-01-01

    Full Text Available The study of the interaction between vanadium oxide and the HY-zeolite using molecular dynamics interaction was carried out for two systems: i when vanadium oxide penetrates a zeolite ring at its center, and ii when vanadium oxide impacts the zeolite surface model. The dynamical effects are used to investigate the reduced activity and eventual degradation of the catalyst for the vanadium oxide presence. In the first case, we observe the breaking of an OH-bond that belongs to the acid site. This is related to an initial loss activity stage of the catalyst. In the second case, vanadium oxide is weakly adsorbed onto the zeolite surface velocity depending. Density functional theory, with nonlocal exchange and correlation functional and the basis set of double numerical accuracy, is used to analyze the electronic structure. It was used in combination with Born-Oppenheimer dynamics to perform calculations.

  2. Application of AXAFS Spectroscopy to Transition-Metal Oxides: Influence of the Nearest and Next Nearest Neighbour Shells in Vanadium Oxides

    NARCIS (Netherlands)

    Keller, D.E.; Weckhuysen, B.M.; Koningsberger, D.C.

    2007-01-01

    The influence of changes in coordination number, interatomic distances, and oxidation state on the intensity and centroid position of the Fourier transform (FT) of the atomic X-ray absorption fine structure (AXAFS) peak of vanadium oxide bulk model compounds and alumina-supported vanadium oxide

  3. The active component of vanadium-molybdenum catalysts for the oxidation of acrolein to acrylic acid

    International Nuclear Information System (INIS)

    Andrushkevich, T.V.; Kuznetsova, T.G.

    1986-01-01

    The catalytic properties of the vanadium-molybdenum oxide system were investigated in the oxidation of acrolein to acrylic acid. The active component of the catalyst is the compound VMo 3 O 11 , the maximum amount of which is observed at a content of 7-15 mole% V 2 O 4 . The compound VMo 3 O 11 is formed in the thermodecomposition of silicomolybdovanadium heteropoly acids or isopoly compounds, reduced with respect to vanadium, and contains V 4+ and Mo 6+ . The optimum treatment for the formation of this compound is treatment in the reaction mixture at 400 degrees C

  4. Vanadium oxide nanotubes as cathode material for Mg-ion batteries

    DEFF Research Database (Denmark)

    Christensen, Christian Kolle; Sørensen, Daniel Risskov; Bøjesen, Espen Drath

    synchrotron powder X-ray diffraction measured during battery operation. These results indicate Mg-intercalation in the multiwalled VOx-NTs occurs within the space between the individual vanadium oxide layers while the underlying VOx frameworks constructing the walls are affected only to a minor degree...... redox-active material for the electrochemical insertion og lithium. J. Electrochem. Soc. 146 (8) 2780-2783 (1999). 4.Reinoso, J. M. et al. Controlled uptake and release of metal cations by vanadium oxide nanotubes. Helvetica Chimica Acta 83 1724-1733 (2000)....

  5. Structural water engaged disordered vanadium oxide nanosheets for high capacity aqueous potassium-ion storage

    Science.gov (United States)

    Charles, Daniel Scott; Feygenson, Mikhail; Page, Katharine; Neuefeind, Joerg; Xu, Wenqian; Teng, Xiaowei

    2017-05-01

    Aqueous electrochemical energy storage devices using potassium-ions as charge carriers are attractive due to their superior safety, lower cost and excellent transport properties compared to other alkali ions. However, the accommodation of potassium-ions with satisfactory capacity and cyclability is difficult because the large ionic radius of potassium-ions causes structural distortion and instabilities even in layered electrodes. Here we report that water induces structural rearrangements of the vanadium-oxygen octahedra and enhances stability of the highly disordered potassium-intercalated vanadium oxide nanosheets. The vanadium oxide nanosheets engaged by structural water achieves high capacity (183 mAh g-1 in half-cells at a scan rate of 5 mV s-1, corresponding to 0.89 charge per vanadium) and excellent cyclability (62.5 mAh g-1 in full cells after 5,000 cycles at 10 C). The promotional effects of structural water on the disordered vanadium oxide nanosheets will contribute to the exploration of disordered structures from earth-abundant elements for electrochemical energy storage.

  6. Nature of active vanadium nanospecies in MCM-41 type catalysts for olefins oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Chanquía, Corina M., E-mail: cchanquia@cab.cnea.gov.ar [Centro Atómico Bariloche, Comisión Nacional de Energía Atómica (CAB-CNEA). Av. Bustillo 9500, R8402AGP, San Carlos de Bariloche, Río Negro (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET). Avenida Rivadavia 1917, C1033AAJ, Ciudad Autónoma de Buenos Aires (Argentina); Cánepa, Analía L. [Centro de Investigación y Tecnología Química (CITeQ), Universidad Tecnológica Nacional, Facultad Regional Córdoba (UTN-FRC), Maestro López esq. Cruz Roja Argentina, Ciudad Universitaria, 5016, Córdoba Capital (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET). Avenida Rivadavia 1917, C1033AAJ, Ciudad Autónoma de Buenos Aires (Argentina); Winkler, Elin L. [Centro Atómico Bariloche, Comisión Nacional de Energía Atómica (CAB-CNEA). Av. Bustillo 9500, R8402AGP, San Carlos de Bariloche, Río Negro (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET). Avenida Rivadavia 1917, C1033AAJ, Ciudad Autónoma de Buenos Aires (Argentina); and others

    2016-06-01

    A multi-technique physicochemical investigation including UV–Vis-DRS, Raman spectroscopy, XPS, ESR and FTIRS with pyridine adsorption was performed to analyze the nature of different vanadium nanospecies present on MCM-41 type catalysts. By employing a direct hydrothermal synthesis, vanadium species were incorporated into siliceous structure mainly as tetrahedrally coordinated isolated V{sup δ+} ions, which would be located inside the wall and on the wall surface of the mesoporous channels. The coexistence of both vanadium oxidation states V{sup 4+} and V{sup 5+} was also revealed. Acidity measurements permitted to infer about the majority presence of Lewis acid sites, which increase with vanadium content. The catalytic performance of these materials was evaluated in the reaction of α-pinene oxidation with H{sub 2}O{sub 2}. The highest intrinsic activity of the sample with lower V loading was attributed to the high dispersion and efficiency of the isolated V{sup δ+} species that actuate as active sites. A mixture of reaction products arising from competitive processes of epoxidation and allylic oxidation was found. - Highlights: • Nature of vanadium nanospecies in mesoporous silicates was investigated. • From hydrothermal sol–gel synthesis, isolated V{sup δ+} sites were mainly generated. • The coexistence of both vanadium oxidation states V{sup 4+} and V{sup 5+} was revealed. • The catalytic performance was evaluated in α-pinene oxidation with H{sub 2}O{sub 2}. • The high catalytic activity is attributed to high dispersion of isolated V{sup δ+} ions.

  7. Geochemical behaviour of vanadium in iron—titanium oxides

    NARCIS (Netherlands)

    Schuiling, R.D.; Feenstra, A.

    The following geochemical rules-of-thumb seem to hold for vanadium: 1. (1) Magnetites as a group have higher V contents than either hematites or ilmenites. 2. (2) In magnetite—hematite pairs, however, the hematite has the higher V content. 3. (3) In magnetite—ilmenite pairs, the magnetite

  8. Catalytic destruction of PCDD/Fs over vanadium oxide-based catalysts.

    Science.gov (United States)

    Yu, Ming-Feng; Lin, Xiao-Qing; Li, Xiao-Dong; Yan, Mi; Prabowo, Bayu; Li, Wen-Wei; Chen, Tong; Yan, Jian-Hua

    2016-08-01

    Vanadium oxide-based catalysts were developed for the destruction of vapour phase PCDD/Fs (polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans). A vapour phase PCDD/Fs generating system was designed to supply stable PCDD/Fs steam with initial concentration of 3.2 ng I-TEQ Nm(-3). Two kinds of titania (nano-TiO2 and conventional TiO2) and alumina were used as catalyst supports. For vanadium-based catalysts supported on nano-TiO2, catalyst activity is enhanced with operating temperature increasing from 160 to 300 °C and then reduces with temperature rising further to 350 °C. It is mainly due to the fact that high volatility of organic compounds at 350 °C suppresses adsorption of PCDD/Fs on catalysts surface and then further inhibits the reaction between catalyst and PCDD/Fs. The optimum loading of vanadium on nano-TiO2 support is 5 wt.% where vanadium oxide presents highly dispersed amorphous state according to the Raman spectra and XRD patterns. Excessive vanadium will block the pore space and form microcrystalline V2O5 on the support surface. At the vanadium loading of 5 wt.%, nano-TiO2-supported catalyst performs best on PCDD/Fs destruction compared to Al2O3 and conventional TiO2. Chemical states of vanadium in the fresh, used and reoxidized VOx(5 %)/TiO2 catalysts at different operating temperature are also analysed by XPS.

  9. The local environment of Co2+ ions intercalated in vanadium oxide/hexadecylamine nanotubes.

    Science.gov (United States)

    Saleta, M E; Aurelio, G; Bardelli, F; Sánchez, R D; Malta, M; Torresi, R M

    2012-10-31

    Vanadium oxide nanotubes constitute promising materials for applications in nanoelectronics as cathode materials, in sensor technology and in catalysis. In this work we present a study on hybrid vanadium oxide/hexadecylamine multiwall nanotubes doped with Co ions using state of the art x-ray diffraction and absorption techniques, to address the issue of the dopant location within the nanotubes' structure. The x-ray absorption near-edge structure analysis shows that the Co ions in the nanotubes are in the 2 + oxidation state, while extended x-ray absorption fine structure spectroscopy reveals the local environment of the Co(2+) ions. Results indicate that Co atoms are exchanged at the interface between the vanadium oxide's layers and the hexadecylamines, reducing the amount of amine chains and therefore the interlayer distance, but preserving the tubular shape. The findings in this work are important for describing Co(2+) interaction with vanadium oxide nanotubes at the molecular level and will help to improve the understanding of their physicochemical behavior, which is desired in view of their promising applications.

  10. Structural, optical and electrochemical properties of F-doped vanadium oxide transparent semiconducting thin films

    Science.gov (United States)

    Mousavi, M.; Khorrami, Gh. H.; Kompany, A.; Yazdi, Sh. Tabatabai

    2017-12-01

    In this study, F-doped vanadium oxide thin films with doping levels up to 60 at % were prepared by spray pyrolysis method on glass substrates. To measure the electrochemical properties, some films were deposited on fluorine-tin oxide coated glass substrates. The effect of F-doping on the structural, electrical, optical and electrochemical properties of vanadium oxide samples was investigated. The X-ray diffractographs analysis has shown that all the samples grow in tetragonal β-V2O5 phase structure with the preferred orientation of [200]. The intensity of (200) peak belonging to β-V2O5 phase was strongest in the undoped vanadium oxide film. The scanning electron microscopy images show that the samples have nanorod- and nanobelt-shaped structure. The size of the nanobelts in the F-doped vanadium oxide films is smaller than that in the pure sample and the width of the nanobelts increases from 30 to 70 nm with F concentration. With increasing F-doping level from 10 to 60 at %, the resistivity, the transparency and the optical band gap decrease from 111 to 20 Ω cm, 70 to 50% and 2.4 to 2.36 eV, respectively. The cyclic voltammogram (CV) results show that the undoped sample has the most extensive CV and by increasing F-doping level from 20 to 60 at %, the area of the CV is expanded. The anodic and cathodic peaks in F-doped samples are stronger.

  11. Optimization of vanadium oxide catalyst for the oxidation of 3-methylpyridine into nicotinic acid

    Directory of Open Access Journals (Sweden)

    Vorobyev Pavel

    2017-01-01

    Full Text Available Upon modification of V2O5 with SnO2 or ZrO2, increase in the activity and selectivity of the vanadium-oxide catalyst in the vapor-phase oxidation of 3-methylpyridine into nicotinic acid were observed. It was shown that the promoting effects of SnO2 and ZrO2 were the result of increases under their influence of the proton affinity of the vanadyl oxygen and decreases in the enthalpy of deprotonation of the methyl group of the substrate, connected by a nitrogen atom with the Lewis acidic center (vanadium ion. The given characteristics were calculated by the density functional theory quantum-chemical method. Modification of binary V2O5–SnO2 and V2O5–ZrO2–catalysts by TiO2 addition resulted in a further increase in the nucleophility of the vanadyl oxygen and, as a consequence, an increase in the catalytic activity and selectivity for nicotinic acid formation.

  12. Bipolar resistive switching in room temperature grown disordered vanadium oxide thin-film devices

    Science.gov (United States)

    Wong, Franklin J.; Sriram, Tirunelveli S.; Smith, Brian R.; Ramanathan, Shriram

    2013-09-01

    We demonstrate bipolar switching with high OFF/ON resistance ratios (>104) in Pt/vanadium oxide/Cu structures deposited entirely at room temperature. The SET (RESET) process occurs when negative (positive) bias is applied to the top Cu electrode. The vanadium oxide (VOx) films are amorphous and close to the vanadium pentoxide stoichiometry. We also investigated Cu/VOx/W structures, reversing the position of the Cu electrode, and found the same polarity dependence with respect to the top and bottom electrodes, which suggests that the bipolar nature is linked to the VOx layer itself. Bipolar switching can be observed at 100 °C, indicating that it not due to a temperature-induced metal-insulator transition of a vanadium dioxide second phase. We discuss how ionic drift can lead to the bipolar electrical behavior of our junctions, similar to those observed in devices based on several other defective oxides. Such low-temperature processed oxide switches could be of relevance to back-end or package integration processing schemes.

  13. Thermochemistry of the complex oxides of uranium, vanadium, and alkali metals

    International Nuclear Information System (INIS)

    Karyakin, N.V.; Chernorukov, N.G.; Suleimanov, E.V.; Kharyushina, E.A.

    1992-01-01

    The standard enthalpies of the formation at T 298.15 K of complex oxides of uranium(VI), vanadium(V) and alkali metals with the general formula M 1 VUO 6 where M 1 = Na, K, Rb, and Cs, were calculated from the results of calorimetric experiments and from published data. 8 refs., 1 tab

  14. Preparation of supported vanadium and molybdenum oxide catalysts using metal acetylacetonate complexes

    NARCIS (Netherlands)

    van Hengstum, A.J.; van Ommen, J.G.; Bosch, H.; Gellings, P.J.

    1983-01-01

    Supported vanadium and molybdenum oxide catalysts were prepared by reaction of the corresponding acetylacetonate complex in a non-aqueous solution with the surface hydroxyl groups of the carrier. Continuous or batch adsorption of the metal acetylacetonate from toluene, as well as wet impregnation

  15. A comprehensive model for the supported vanadium oxide catalyst: The umbrella model

    NARCIS (Netherlands)

    Lingen, J.N.J. van

    2006-01-01

    Supported vanadium oxide catalysts are widely used in industry. However, the molecular structure of the active species, responsible for the actual catalysis, is for a large part still unknown. This thesis describes four years study on the elucidation of this molecular structure. It mainly focuses on

  16. Raman and XPS characterization of vanadium oxide thin films with temperature

    Energy Technology Data Exchange (ETDEWEB)

    Ureña-Begara, Ferran, E-mail: ferran.urena@uclouvain.be [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium); Crunteanu, Aurelian [XLIM Research Institute, UMR 7252, CNRS/Université de Limoges, Limoges (France); Raskin, Jean-Pierre [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium)

    2017-05-01

    Highlights: • Comprehensive study of the oxidation of VO{sub 2} thin films from R.T. up to 550 °C. • Phase changes and mixed-valence vanadium oxides formed during the oxidation process. • Reported Raman and XPS signatures for each vanadium oxide. • Monitoring of the current and resistance evolution at the surface of the films. • Oxidation model describing the evolution of the vanadium oxides and phase changes. - Abstract: The oxidation mechanisms and the numerous phase transitions undergone by VO{sub 2} thin films deposited on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates when heated from room temperature (R.T.) up to 550 °C in air are investigated by Raman and X-ray photoelectron spectroscopy. The results show that the films undergo several intermediate phase transitions between the initial VO{sub 2} monoclinic phase at R.T. and the final V{sub 2}O{sub 5} phase at 550 °C. The information about these intermediate phase transitions is scarce and their identification is important since they are often found during the synthesis of vanadium dioxide films. Significant changes in the film conductivity have also been observed to occur associated to the phase transitions. In this work, current and resistance measurements performed on the surface of the films are implemented in parallel with the Raman measurements to correlate the different phases with the conductivity of the films. A model to explain the oxidation mechanisms and phenomena occurring during the oxidation of the films is proposed. Peak frequencies, full-width half-maxima, binding energies and oxidation states from the Raman and X-ray photoelectron spectroscopy experiments are reported and analyzed for all the phases encountered in VO{sub 2} films prepared on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates.

  17. Silver vanadium oxide and silver vanadium phosphorous oxide dissolution kinetics: a mechanistic study with possible impact on future ICD battery lifetimes.

    Science.gov (United States)

    Bock, David C; Takeuchi, Kenneth J; Marschilok, Amy C; Takeuchi, Esther S

    2013-10-14

    Material design strategies for energy storage applications can be considered in two major categories: (1) control of structure and composition and (2) material dimensional control such as the implementation of nanomaterials. Characterization of electrochemical properties determines energy content and possible viability for potential application. Equally critical yet more challenging is quantifying the non-Faradaic parasitic reactions of the active materials and the relationship to battery life. Understanding the significant factors associated with battery lifetimes for the implantable cardioverter defibrillator (ICD) is critical for the development of new ICD batteries. In situ dissolution of the cathode material has been identified as a major factor in premature end of life for ICD batteries. This study contains the kinetic analyses of silver and vanadium dissolution from the benchmark silver vanadium oxide (SVO) material and two silver vanadium phosphorous oxide (SVPO-H and SVPO-R) materials with differing physical properties in a non-aqueous ICD battery electrolyte. A comparison of the kinetic and mechanistic results for SVO, SVPO-H and SVPO-R provides insight for future material design approaches.

  18. On the Problem of Metal-Insulator Transitions in Vanadium Oxides

    OpenAIRE

    A. A. Velichko; N. A. Kuldin; G. B. Stefanovich; A. L. Pergament

    2013-01-01

    The problem of metal-insulator transition is considered. It is shown that the Mott criterion aB(nc)1/3≈0.25 is applicable not only to heavily doped semiconductors but also to many other materials, including some transition-metal compounds, such as vanadium oxides (particularly, VO2 and V2O3). The low-temperature transition (“paramagnetic metal—antiferromagnetic insulator”) in vanadium sesquioxide is described on the basis of this concept in terms of an intervening phase, between metal and ins...

  19. Optimization Mechanism of Additive of Composite Sodium Salts on Vanadium Oxidation of Siliceous Shale

    Directory of Open Access Journals (Sweden)

    Xinlong Yang

    2017-06-01

    Full Text Available The promotion of strengthening of vanadium oxidation by compound additive of sodium salts is described from the changes of the vanadium valence state and mineral phase. The results are as follows: during the roasting process, dehydroxy mica converts to the melt, which the composite system mainly contains Na, K, Al, Si, and O. Under the action of NaCl-Na2CO3, ion exchange between sodium and potassium promotes the crystallization of albite from the melt. Na2CO3 enhances the reactivity of quartz. The albite reacts with activated quartz, which promotes the migration of sodium ions and the generation of vanadate. Under the action of NaCl-Na2SO4, The crystallization of spinel in the melt is promoted and that of the albite is inhibited. Under the action of Na2SO4-Na2CO3, the permeability of ore is deteriorated. The ion exchange process and the vanadium oxidation is inhibited from the melt. The composite additive with three sodium salts shows a stronger promoting effect on vanadium oxidation. The contribution of NaCl and Na2CO3 to V(V in roasted slag was the highest among three sodium salts. With a certain ratio of NaCl and Na2CO3, the low content of Na2SO4 did not significantly affect the V(V content in roasted slag.

  20. A Kinetics and Equilibrium Study of Vanadium Dissolution from Vanadium Oxides and Phosphates in Battery Electrolytes: Possible Impacts on ICD Battery Performance.

    Science.gov (United States)

    Bock, David C; Marschilok, Amy C; Takeuchi, Kenneth J; Takeuchi, Esther S

    2013-06-01

    Silver vanadium oxide (Ag 2 V 4 O 11 , SVO) has enjoyed widespread commercial success over the past 30 years as a cathode material for implantable cardiac defibrillator (ICD) batteries. Recently, silver vanadium phosphorous oxide (Ag 2 VO 2 PO 4 , SVPO) has been studied as possibly combining the desirable thermal stability aspects of LiFePO 4 with the electrical conductivity of SVO. Further, due to the noted insoluble nature of most phosphate salts, a lower material solubility of SVPO relative to SVO is anticipated. Thus, the first vanadium dissolution studies of SVPO in battery electrolyte solutions are described herein. The equilibrium solubility of SVPO was ~5 times less than SVO, with a rate constant of dissolution ~3.5 times less than that of SVO. The vanadium dissolution in SVO and SVPO can be adequately described with a diffusion layer model, as supported by the Noyes-Whitney equation. Cells prepared with vanadium-treated anodes displayed higher AC impedance and DC resistance relative to control anodes. These data support the premise that SVPO cells are likely to exhibit reduced cathode solubility and thus less affected by increased cell resistance due to cathode solubility compared to SVO based cells.

  1. ALTERNATIVE ROUTES FOR CATALYST PREPARATION: USE OF ULTRASOUND AND MICROWAVE IRRADIATION FOR THE PREPARATION OF VANADIUM PHOSPHORUS OXIDE CATALYST AND THEIR ACTIVITY FOR HYDROCARBON OXIDATION

    Science.gov (United States)

    Vanadium phosphorus oxide (VPO) has been prepared using ultrasound and microwave irradiation methods and compared with the catalyst prepared by conventional method for both the phase composition and activity for hydrocarbon oxidation. It is found that ultrasound irradiation metho...

  2. Thermally Stable Solution Processed Vanadium Oxide as a Hole Extraction Layer in Organic Solar Cells.

    Science.gov (United States)

    Alsulami, Abdullah; Griffin, Jonathan; Alqurashi, Rania; Yi, Hunan; Iraqi, Ahmed; Lidzey, David; Buckley, Alastair

    2016-03-25

    Low-temperature solution-processable vanadium oxide (V₂O x ) thin films have been employed as hole extraction layers (HELs) in polymer bulk heterojunction solar cells. V₂O x films were fabricated in air by spin-coating vanadium(V) oxytriisopropoxide (s-V₂O x ) at room temperature without the need for further thermal annealing. The deposited vanadium(V) oxytriisopropoxide film undergoes hydrolysis in air, converting to V₂O x with optical and electronic properties comparable to vacuum-deposited V₂O₅. When s-V₂O x thin films were annealed in air at temperatures of 100 °C and 200 °C, OPV devices showed similar results with good thermal stability and better light transparency. Annealing at 300 °C and 400 °C resulted in a power conversion efficiency (PCE) of 5% with a decrement approximately 15% lower than that of unannealed films; this is due to the relative decrease in the shunt resistance (R sh ) and an increase in the series resistance (R s ) related to changes in the oxidation state of vanadium.

  3. Electrical and Infrared Optical Properties of Vanadium Oxide Semiconducting Thin-Film Thermometers

    Science.gov (United States)

    Zia, Muhammad Fakhar; Abdel-Rahman, Mohamed; Alduraibi, Mohammad; Ilahi, Bouraoui; Awad, Ehab; Majzoub, Sohaib

    2017-10-01

    A synthesis method has been developed for preparation of vanadium oxide thermometer thin film for microbolometer application. The structure presented is a 95-nm thin film prepared by sputter-depositing nine alternating multilayer thin films of vanadium pentoxide (V2O5) with thickness of 15 nm and vanadium with thickness of 5 nm followed by postdeposition annealing at 300°C in nitrogen (N2) and oxygen (O2) atmospheres. The resulting vanadium oxide (V x O y ) thermometer thin films exhibited temperature coefficient of resistance (TCR) of -3.55%/°C with room-temperature resistivity of 2.68 Ω cm for structures annealed in N2 atmosphere, and TCR of -3.06%/°C with room-temperature resistivity of 0.84 Ω cm for structures annealed in O2 atmosphere. Furthermore, optical measurements of N2- and O2-annealed samples were performed by Fourier-transform infrared ellipsometry to determine their dispersion curves, refractive index ( n), and extinction coefficient ( k) at wavelength from 7000 nm to 14,000 nm. The results indicate the possibility of applying the developed materials in thermometers for microbolometers.

  4. Synthesis of oxide-supported vanadium catalysts and their activity in ethylene polymerization

    International Nuclear Information System (INIS)

    Czaja, K.; Korach, L.; Bialek, M.

    1999-01-01

    The activity of oxide supported vanadium-based catalyst system (VOCl 3 /Et 2 AlCl) in low-pressure ethylene polymerization and the properties of the resulting polyethylenes were studied in relation to the type and mode of modification of the oxide support. Alumina and silica and an unconventional silica-type material prepared by sol-gel process were used as supports. Results are compared with those obtained earlier with a catalyst supported on MgCl 2 (THF) 2 . Of the oxides studied, the silica-type sol-gel material dehydrated and subsequently modified with Et 2 AlCl proved to be the best carrier for the vanadium catalyst. The polyethylene prepared by using this catalyst support was found to exhibit good morphology, especially as compared with the polymer prepared over the more active Mg-V-Al catalyst. (author)

  5. Efficiency improvement of multicrystalline silicon solar cells after surface and grain boundaries passivation using vanadium oxide

    International Nuclear Information System (INIS)

    Derbali, L.; Ezzaouia, H.

    2012-01-01

    Highlights: ► Evaporation of vanadium pentoxide onto the front surface leads to reduce the surface reflectivity considerably. ► An efficient surface passivation can be obtained after thermal treatment of obtained films. ► Efficiency of the obtained solar cells has been improved noticeably after thermal treatment of deposited thin films. - Abstract: The aim of this work is to investigate the effect of vanadium oxide deposition onto the front surface of multicrystalline silicon (mc-Si) substrat, without any additional cost in the fabrication process and leading to an efficient surface and grain boundaries (GBs) passivation that have not been reported before. The lowest reflectance of mc-Si coated with vanadium oxide film of 9% was achieved by annealing the deposited film at 600 °C. Vanadium pentoxide (V 2 O 5 ) were thermally evaporated onto the surface of mc-Si substrates, followed by a short annealing duration at a temperature ranging between 600 °C and 800 °C, under O 2 atmosphere. The chemical composition of the films was analyzed by means of Fourier transform infrared spectroscopy (FTIR). Surface and cross-section morphology were determined by atomic force microscope (AFM) and a scanning electron microscope (SEM), respectively. The deposited vanadium oxide thin films make the possibility of combining in one processing step an antireflection coating deposition along with efficient surface state passivation, as compared to a reference wafer. Silicon solar cells based on untreated and treated mc-Si wafers were achieved. We showed that mc-silicon solar cells, subjected to the above treatment, have better short circuit currents and open-circuit voltages than those made from untreated wafers. Thus, the efficiency of obtained solar cells has been improved.

  6. X-Ray Absorption Studies of Vanadium-Containing Metal Oxide Nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Hohn, Keith, L.

    2006-01-09

    Metal oxide nanocrystals offer significant potential for use as catalysts or catalyst supports due to their high surface areas and unique chemical properties that result from the high number of exposed corners and edges. However, little is known about the catalytic activity of these materials, especially as oxidation catalysts. This research focused on the preparation, characterization and use of vanadium-containing nanocrystals as selective oxidation catalysts. Three vanadium-containing nanocrystals were prepared using a modified sol-gel procedure: V/MgO, V/SiO2, and vanadium phosphate (VPO). These represent active oxidation catalysts for a number of industrially relevant reactions. The catalysts were characterized by x-ray diffraction and Raman, UV-VIS, infrared and x-ray absorption spectroscopies with the goal of determining the primary structural and chemical differences between nanocrystals and microcrystals. The catalytic activity of these catalysts was also studied in oxidative dehydrogenation of butane and methanol oxidation to formaldehyde. V/MgO nanocrystals were investigated for activity in oxidative dehydrogenation of butane and compared to conventional V/MgO catalysts. Characterization of V/MgO catalysts using Raman spectroscopy and x-ray absorption spectroscopy showed that both types of catalysts contained magnesium orthovanadate at vanadium loadings below 15 weight%, but above that loading, magnesium pyrovanadate may have been present. In general, MgO nanocrystals had roughly half the crystal size and double the surface area of the conventional MgO. In oxidative dehydrogenation of butane, nanocrystalline V/MgO gave higher selectivity to butene than conventional V/MgO at the same conversion. This difference was attributed to differences in vanadium domain size resulting from the higher surface areas of the nanocrystalline support, since characterization suggested that similar vanadium phases were present on both types of catalysts. Experiments in

  7. Anomalous reactivity of supported V2O5 nanoparticles for propane oxidative dehydrogenation: influence of the vanadium oxide precursor.

    Science.gov (United States)

    Carrero, Carlos A; Keturakis, Christopher J; Orrego, Andres; Schomäcker, Reinhard; Wachs, Israel E

    2013-09-21

    The oxidative dehydrogenation (ODH) of propane to propylene by supported vanadia catalysts has received much attention in recent years, but different reactivity trends have been reported for this catalytic reaction system. In the present investigation, the origin of these differing trends are investigated with synthesis of supported V/SiO2, V/TiO2, and V/Al2O3 catalysts prepared with three different vanadium oxide precursors (2-propanol/vanadyl triisopropoxide [VO(O-Pri)3] (VTI), oxalic acid/ammonium metavanadate [NH4VO3] (AMV), and toluene/vanadyl acetylacetonate [VO(C5H7O2)2] (VAA)) in order to elucidate the influence of the precursor on supported vanadia phase and propane ODH activity. In situ Raman spectroscopy revealed that the choice of vanadium precursor does not affect the dispersion of the supported vanadium oxide phase below 4 V nm(-2) (0.5 monolayer coverage), where only isolated and oligomeric surface VO4 species are present, and only the AMV precursor favors crystalline V2O5 nanoparticle (NP) formation below monolayer coverage (8 V nm(-2)). The propane ODH specific reactivity trend demonstrated that there is no significant difference in TOF for the isolated and oligomeric surface VO4 sites. Surprisingly, V2O5 NPs in the ∼1-2 nm range exhibit anomalously high propane ODH TOF values for the supported vanadia catalysts. This was found for all supported vanadium oxide catalysts examined. This comparative study with different V-precursors and synthesis methods and oxide supports finally resolves the debate in the catalysis literature about the dependence of TOF on the surface vanadium density that is related to the unusually high reactivity of small V2O5 NPs.

  8. Effect of thermal treatment conditions on properties of vanadium molybdenum oxide catalyst in acrolein oxidation reaction to acrylic acid

    International Nuclear Information System (INIS)

    Gorshkova, T.P.; Tarasova, D.V.; Olen'kova, I.P.; Andrushkevich, T.V.; Nikoro, T.A.

    1984-01-01

    The effect of thermal treatment conditions (temperature and gas medium) on properties of vanadium molybdenum oxide catalyst in acrolein oxidation reaction to acrylic acid is investigated. It is shown that active and selective catalysts are formed in the course of thermal decomposition of the drying product of ammonium metavanadate and paramolybdate under the conditions ensuring the vanadium ion reduction up to tetravalent state with conservation of molybdenum oxidation degree equal to 6. It is possible to realize it either by treatment of the catalyst calcinated in the air flow at 300 deg by the reaction mixture at the activation stage or by gas-reducer flow treatment at 280 deg. Thermal treatment in the reducing medium of the oxidized catalyst does not lead to complete regeneration of its properties

  9. Diagnosis of deactivation sources for vanadium catalysts used in SO 2 oxidation reaction and optimization of vanadium extraction from deactivated catalysts

    Science.gov (United States)

    Ksibi, Mohamed; Elaloui, Elimam; Houas, Ammar; Moussa, Noomen

    2003-12-01

    Physico-chemical analysis (X-ray, FTIR) and/or methanol oxidation reaction test were performed on fresh and deactivated vanadium catalysts used in H 2SO 4 manufacturing. It allowed the diagnosis of catalyst deactivation sources, as well as the processes of regenerating and recycling the worn out catalyst in converter. One of these processes is hydrometallurgical method. It consists in treating the deactivated catalyst with alkaline or acidic reagents and forming vanadate solution. A simple and non-costly operation of chemical attack permits the extraction of vanadium from silica in deactivated catalyst. The extracted vanadium can be used for the confection of regenerated catalysts or metallic tools. After optimization, this method can be used for industrial application.

  10. Diagnosis of deactivation sources for vanadium catalysts used in SO{sub 2} oxidation reaction and optimization of vanadium extraction from deactivated catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ksibi, Mohamed; Elaloui, Elimam; Houas, Ammar; Moussa, Noomen

    2003-12-30

    Physico-chemical analysis (X-ray, FTIR) and/or methanol oxidation reaction test were performed on fresh and deactivated vanadium catalysts used in H{sub 2}SO{sub 4} manufacturing. It allowed the diagnosis of catalyst deactivation sources, as well as the processes of regenerating and recycling the worn out catalyst in converter. One of these processes is hydrometallurgical method. It consists in treating the deactivated catalyst with alkaline or acidic reagents and forming vanadate solution. A simple and non-costly operation of chemical attack permits the extraction of vanadium from silica in deactivated catalyst. The extracted vanadium can be used for the confection of regenerated catalysts or metallic tools. After optimization, this method can be used for industrial application.

  11. Structure-property relationships in NO x sensor materials composed of arrays of vanadium oxide nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Putrevu, Naga Ravikanth; Darling, Seth B.; Segre, Carlo U.; Ganegoda, Hasitha; Khan, M. Ishaque

    2017-12-01

    The mixed‐valent vanadium oxide based three‐dimensional framework structure species [Cd3(H2O)12V16IVV2VO36(OH)6(AO4)]∙24H2O, (A=V,S) (Cd3(VO)o) represents a rare example of an interesting sensor material which exhibits NOx {NO+NO2} semiconducting gas sensor properties under ambient conditions. The electrical resistance of the sensor material Cd3(VO)o decreases in air. Combined characterization studies revealed that the building block, {V18O42(AO4)} cluster, of 3‐D framework undergoes oxidation and remains intact for at least 2 months. The decrease in resistance is attributable to the reactivity of molecular oxygen towards vanadium which results in an increase in the oxidation state as well as the coordination number of vanadium center and decrease in band gap of Cd3(VO)o. Based on these results we propose that the changes in semiconducting properties of Cd3(VO)o under ambient conditions are due to the greater overlap between the O 2p and V 3d orbitals occurring during the oxidation.

  12. Structure-property relationships in NOx sensor materials composed of arrays of vanadium oxide nanoclusters

    Science.gov (United States)

    Putrevu, Naga Ravikanth; Darling, Seth B.; Segre, Carlo U.; Ganegoda, Hasitha; Khan, M. Ishaque

    2017-12-01

    The mixed-valent vanadium oxide based three-dimensional framework structure species [Cd3(H2O)12V16IVV2VO36(OH)6 (AO4)]·24H2O, (A = V,S) (Cd3(VO)o) represents a rare example of an interesting sensor material which exhibits NOx {NO + NO2} semiconducting gas sensor properties under ambient conditions. The electrical resistance of the sensor material Cd3(VO)o decreases in air. Combined characterization studies revealed that the building block, {V18O42(AO4)} cluster, of 3-D framework undergoes oxidation and remains intact for at least 2 months. The decrease in resistance is attributable to the reactivity of molecular oxygen towards vanadium which results in an increase in the oxidation state as well as the coordination number of vanadium center and decrease in band gap of Cd3(VO)o. Based on these results we propose that the changes in semiconducting properties of Cd3(VO)o under ambient conditions are due to the greater overlap between the O 2p and V 3d orbitals occurring during the oxidation.

  13. Graphite furnace atomic absorption spectrometric determination of vanadium after cloud point extraction in the presence of graphene oxide

    Science.gov (United States)

    López-García, Ignacio; Marín-Hernández, Juan José; Hernández-Córdoba, Manuel

    2018-05-01

    Vanadium (V) and vanadium (IV) in the presence of a small concentration of graphene oxide (0.05 mg mL-1) are quantitatively transferred to the coacervate obtained with Triton X-114 in a cloud point microextraction process. The surfactant-rich phase is directly injected into the graphite atomizer of an atomic absorption spectrometer. Using a 10-mL aliquot sample and 150 μL of a 15% Triton X-114 solution, the enrichment factor for the analyte is 103, which results in a detection limit of 0.02 μg L-1 vanadium. The separation of V(V) and V(IV) using an ion-exchanger allows speciation of the element at low concentrations. Data for seven reference water samples with certified vanadium contents confirm the reliability of the procedure. Several beer samples are also analyzed, those supplied as canned drinks showing low levels of tetravalent vanadium.

  14. Vanadium oxide (VO) based low cost counter electrode in dye sensitized solar cell (DSSC) applications

    Energy Technology Data Exchange (ETDEWEB)

    Vijayakumar, P.; Pandian, Muthu Senthil; Ramasamy, P., E-mail: ramasamyp@ssn.edu.in [SSN Research Centre, SSN College of Engineering, Kalavakkam-603 110, Chennai, Tamilnadu (India)

    2015-06-24

    Vanadium oxide nanostars were synthesized by chemical method. The prepared Vanadium oxide nanostars are introduced into dye sensitized solar cell (DSSC) as counter electrode (CE) catalyst to replace the expensive platinum (Pt). The products were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and Brunauer–Emmett–Teller (BET) method. The photovoltaic performance of the VO as counter electrode based DSSC was evaluated under simulated standard global AM 1.5G sunlight (100 mW/cm{sup 2}). The solar to electrical energy conversion efficiency (η) of the DSSC was found to be 0.38%.This work expands the Counter electrode catalyst, which can help to reduce the cost of DSSC and thereby encourage their fundamental research and commercial application.

  15. Promoting effect of vanadium on catalytic activity of Pt/Ce-Zr-O diesel oxidation catalysts.

    Science.gov (United States)

    Huang, Haifeng; Jiang, Bo; Gu, Lei; Qi, Zhonghua; Lu, Hanfeng

    2015-07-01

    A series of Pt-V/Ce-Zr-O diesel oxidation catalysts was prepared using the impregnation method. The catalytic activity and sulfur resistance of Pt-V/Ce-Zr-O were investigated in the presence of simulated diesel exhaust. The effect of vanadium on the structure and redox properties of the catalysts was also investigated using the Brunauer-Emmett-Teller method, X-ray diffraction, H2 temperature-programmed reduction, CO temperature-programmed desorption, X-ray photoelectron spectroscopy, and Energy Dispersive Spectroscopy. Results showed that the Pt particles were well dispersed on the Ce-Zr-O carrier through the vanadium isolation effect, which significantly improved the oxidation activity toward CO and hydrocarbons. An electron-withdrawing phenomenon occurred from V to Pt, resulting in an increase in the metallic nature of platinum, which was beneficial to hydrocarbon molecular activation. Copyright © 2015. Published by Elsevier B.V.

  16. Hysteresis phenomena at metal-semiconductor phase transformation in vanadium oxides

    International Nuclear Information System (INIS)

    Lanskaya, T.G.; Merkulov, I.A.; Chudnovski , F.A.

    1978-01-01

    The hysteresis phenomena during the metal-semiconductor phase transformation (MSPT) in vanadium oxides are investigated. It is shown experimentally that the hysteresis effects during MSPT in vanadium oxides are associated not only with the martensite nature of the transformation, but also with activation processes. It is shown that the hysteresis phenomena during MSPT may be described by the distribution function of microregions of the crystal in the phase transformation temperature T 0 and the coercive temperature Tsub(c). An experimental method for constructing this distribution function was worked out. An analysis of the experimental data shows that finely dispersed films are characterized by a wide range of values of T 0 and Tsub(c) (55 deg C 0 <65 deg C, 6 deg C< Tsub(c)<12 deg C). The peculiarities of the optical recording of information on monocrystal and finely dispersed films are considered

  17. Electrodynamics of the vanadium oxides VO2 and V2O3

    Science.gov (United States)

    Qazilbash, M. M.; Schafgans, A. A.; Burch, K. S.; Yun, S. J.; Chae, B. G.; Kim, B. J.; Kim, H. T.; Basov, D. N.

    2008-03-01

    The optical and infrared properties of films of vanadium dioxide (VO2) and vanadium sesquioxide (V2O3) have been investigated via ellipsometry and near-normal incidence reflectance measurements from far infrared to ultraviolet frequencies. Significant changes occur in the optical conductivity of both VO2 and V2O3 across the metal-insulator transitions at least up to (and possibly beyond) 6eV . We argue that such changes in optical conductivity and electronic spectral weight over a broad frequency range are evidence of the important role of electronic correlations to the metal-insulator transitions in both of these vanadium oxides. We observe a sharp optical transition with possible final state (exciton) effects in the insulating phase of VO2 . This sharp optical transition occurs between narrow a1g bands that arise from the quasi-one-dimensional chains of vanadium dimers. Electronic correlations in the metallic phases of both VO2 and V2O3 lead to reduction of the kinetic energy of the charge carriers compared to band theory values, with paramagnetic metallic V2O3 showing evidence of stronger correlations compared to rutile metallic VO2 .

  18. Sol-gel synthesis and XPS study of vanadium-hydroquinone oxide bronze films

    Energy Technology Data Exchange (ETDEWEB)

    Bondarenka, V. [Semiconductor Physics Institute, A. Gostauto 11, 01108 Vilnius (Lithuania); Vilnius Pedagogical University, Studentu 39, 08106 Vilnius (Lithuania); Tvardauskas, H.; Grebinskij, S.; Senulis, M.; Pasiskevicius, A. [Semiconductor Physics Institute, A. Gostauto 11, 01108 Vilnius (Lithuania); Volkov, V.; Zakharova, G. [Institute of Solid State Chemistry, Pervomaiskaia 91, 620219 Yekaterinburg (Russian Federation)

    2009-12-15

    A vanadium - hydroquinone oxide bronze has been synthesized by using a sol gel technology. The V{sub 2}O{sub 5} powder, hydrogen peroxide, and hydroquinone C{sub 6}H{sub 4}(OH){sub 2} were used as the starting materials to produce the bronze. At first the vanadium gel was made by the dissolving of vanadium pentoxide powder in hydrogen peroxide at 273 K. Then the solution was heated up to 350 K for the dissociation of peroxide complexes. An aqueous solution of hydroquinone was mixed with the formed gel in molar ratio 0.33:1. In this way the V{sub 2}O{sub 5{+-}}{sub {delta}}.nH{sub 2}O/HQ (HQ-hydroquinone) gel was synthesized. These gels are applied on the Ni pad and dried in an air (wet gel synthesis) or heated up to 580 K in air for 1 h for the water removal from gel (bronze production). The wet gel, as well as a bronze, was investigated by means of XPS method. Analysis of V-O region of XPS spectra shows that vanadium in both cases (wet gel and bronze) is in stable V{sup 5+} state. Oxygen in wet gel can be associated with V ions, hydroxide group and water. In bronze oxygen is connected with V and hydrogen (hydroxide). (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. Dissimilar Crystal Dependence of Vanadium Oxide Cathodes in Organic Carbonate and Safe Ionic Liquid Electrolytes.

    Science.gov (United States)

    Tartaj, Pedro; Amarilla, Jose M; Morales, Enrique; Vazquez-Santos, Maria B

    2016-01-27

    Advances in Li metal anode stabilization, solid-state electrolytes, and capabilities to insert a variety of active ions (Li(+), Na(+), Mg(2+), and Al(3+)) have renewed the interest in layered vanadium oxides. Here we show that crystal characteristics such as size and crystallinity are fundamental variables that control the dissimilar electrochemical capabilities of 1D vanadium oxides immersed in different electrolytes (organic carbonates and safe electrolytes containing 80% of ionic liquid). We show that this opposite behavior can be understood in terms of a subtle interplay between crystal characteristics (size and crystallinity), electrolyte degradability, and the ionic conductivity of the electrolyte. Thus, through this control we are able to obtain pure 1D vanadium oxides that show reversibility in carbonate electrolytes at a cutoff voltage of 1.5 V (voltage region where insertion of more than two lithium ions is possible). Furthermore, these materials are able to uptake ca. 1.0 mol of Li at a rate of 20C (1C = 295 mAh/g) and retain excellent capabilities (Coulombic efficiency of 98% after 200 cycles at a rate of 5C). Finally, what, to our knowledge, is really remarkable is that this optimization allows building vanadium oxide electrodes with an excellent electrochemical response in a safe electrolyte composition (80% of ionic liquid). Specifically, we reach uptakes also at a cutoff voltage of 1.5 V of ca. 1.0 mol of Li after 200 cycles at 5C (charge/discharge) with Coulombic efficiencies higher than 99.5%.

  20. A new class of homogeneous visible-light photocatalysts: molecular cerium vanadium oxide clusters.

    Science.gov (United States)

    Seliverstov, Andrey; Streb, Carsten

    2014-07-28

    The first systematic access to molecular cerium vanadium oxides is presented. A family of structurally related, di-cerium-functionalized vanadium oxide clusters and their use as visible-light-driven photooxidation catalysts is reported. Comparative analyses show that photocatalytic activity is controlled by the cluster architecture. Increased photoreactivity of the cerium vanadium oxides in the visible range compared with nonfunctionalized vanadates is observed. Based on the recent discovery of the first molecular cerium vanadate cluster, (nBu4 N)2 [(Ce(dmso)3 )2 V12 O33 Cl]⋅2 DMSO (1), two new di-cerium-containing vanadium oxide clusters [(Ce(dmso)4 )2 V11 O30 Cl]⋅DMSO (2) and [(Ce(nmp)4 )2 V12 O32 Cl]⋅NMP⋅Me2 CO (3; NMP=N-methyl-2-pyrrolidone) were obtained by using a novel fragmentation and reassembly route. Pentagonal building units {(V)M5 } (M=V, Ce) reminiscent of "Müller-type" pentagons are observed in 2 and 3. Compounds 1-3 feature high visible-light photooxidative activity, and quantum efficiencies >10 % for indigo photooxidation are observed. Photocatalytic performance increases in the order 1<3<2. Mechanistic studies show that the irradiation wavelength and the presence of oxygen strongly affect photoreactivity. Initial findings suggest that the photooxidation mechanism proceeds by intermediate formation of hydroxyl radicals. The findings open new avenues for the bottom-up design of sunlight-driven photocatalysts. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Effects of Vanadium Ions in Different Oxidation States on Myosin ATPase Extracted from the Solitary Ascidian, Halocynthia roretzi (Drasche) : Biochemistry

    OpenAIRE

    HITOSHI, MICHIBATA; YUTAKA, ZENKO; KENJI, YAMADA; MASATO, HASEGAWA; TATSURO, TERADA; TAKAHARU, NUMAKUANI; Biological Institute, Faculty of Science, Toyama University; Biological Institute, Faculty of Science, Toyama University; Biological Institute, Faculty of Science, Toyama University; Biological Institute, Faculty of Science, Toyama University; Department of Chemistry, Toyama College of Technology; Marine Biological Station, Tohoku University

    1989-01-01

    Some ascidians are known to accumulate vanadium ion within their tissues by 10^6-fold as that in sea water and store the metal ion in its reduced tetravalent and/or trivalent states. It is also well known that phosphoenzymes are inhibited by pentavalent vanadium ion over a range of 10nM to 1mM. In the present experiment we have therefore examined the effects of vanadium ions in different oxidation states on the activity of myosin ATPase extracted from the mantle of the ascidian, Halocynthia r...

  2. Oxidative dehydration of glycerol to acrylic acid over vanadium-impregnated zeolite beta

    Energy Technology Data Exchange (ETDEWEB)

    Pestana, Carolina F.M.; Guerra, Antonio C.O.; Turci, Cassia C. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Ferreira, Glaucio B. [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Inst. de Quimica; Mota, Claudio J.A., E-mail: cmota@iq.ufrj.br [INCT Energia e Ambiente, Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2013-01-15

    The oxidative dehydration of glycerol to acrylic acid was studied over vanadium-impregnated zeolite Beta. Catalysts were prepared by wet impregnation of ammonium metavanadate over ammonium-exchanged zeolite Beta, followed by air calcination at 823 K. Impregnation reduced the specific surface area, but did not significantly affected the acidity (Bronsted and Lewis) of the zeolites. The catalytic evaluation was carried out in a fixed bed flow reactor using air as the carrier and injecting glycerol by means of a syringe pump. Acrolein was the main product, with acetaldehyde and hydroxy-acetone (acetol) being also formed. Acrylic acid was formed with approximately 25% selectivity at 548 K over the impregnated zeolites. The result can be explained by XPS (X-ray photoelectron spectroscopy) measurements, which indicated a good dispersion of the vanadium inside the pores. (author)

  3. Deposition of vanadium oxide films by direct-current magnetron reactive sputtering

    Science.gov (United States)

    Kusano, E.; Theil, J. A.; Thornton, John A.

    1988-01-01

    It is demonstrated here that thin films of vanadium oxide can be deposited at modest substrate temperatures by dc reactive sputtering from a vanadium target in an O2-Ar working gas using a planar magnetron source. Resistivity ratios of about 5000 are found between a semiconductor phase with a resistivity of about 5 Ohm cm and a metallic phase with a resistivity of about 0.001 Ohm cm for films deposited onto borosilicate glass substrates at about 400 C. X-ray diffraction shows the films to be single-phase VO2 with a monoclinic structure. The VO2 films are obtained for a narrow range of O2 injection rates which correspond to conditions where cathode poisoning is just starting to occur.

  4. Oxidative dehydration of glycerol to acrylic acid over vanadium-impregnated zeolite beta

    International Nuclear Information System (INIS)

    Pestana, Carolina F.M.; Guerra, Antonio C.O.; Turci, Cassia C.

    2013-01-01

    The oxidative dehydration of glycerol to acrylic acid was studied over vanadium-impregnated zeolite Beta. Catalysts were prepared by wet impregnation of ammonium metavanadate over ammonium-exchanged zeolite Beta, followed by air calcination at 823 K. Impregnation reduced the specific surface area, but did not significantly affected the acidity (Bronsted and Lewis) of the zeolites. The catalytic evaluation was carried out in a fixed bed flow reactor using air as the carrier and injecting glycerol by means of a syringe pump. Acrolein was the main product, with acetaldehyde and hydroxy-acetone (acetol) being also formed. Acrylic acid was formed with approximately 25% selectivity at 548 K over the impregnated zeolites. The result can be explained by XPS (X-ray photoelectron spectroscopy) measurements, which indicated a good dispersion of the vanadium inside the pores. (author)

  5. A high-performance catalyst support for methanol oxidation with graphene and vanadium carbonitride.

    Science.gov (United States)

    Huang, Taizhong; Mao, Shun; Zhou, Guihua; Zhang, Zhaoliang; Wen, Zhenhai; Huang, Xingkang; Ci, Suqin; Chen, Junhong

    2015-01-28

    In this study, a graphene-vanadium carbonitride (G-V(C, N)) hybrid is reported as a novel support for the Pt catalyst in methanol oxidation. The catalytic activity of the Pt/G-V(C, N) hybrid for methanol oxidation is greatly enhanced compared with that of a commercial Pt/C catalyst with carbon black as the catalyst support. The outstanding catalytic activity of the Pt/G-V(C, N) catalyst suggests the potential of using graphene-metal carbonitride as the catalyst support in fuel cells.

  6. Thin oxide-free phosphate films of composition formed on the surface of vanadium metal and characterized by x-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Asunskis, D.J.; Sherwood, P.M.A.

    2006-01-01

    This article reports the preparation of thin (less than 100 A) oxide-free phosphate films of various compositions on vanadium metal. These films are interesting because of their potential for corrosion inhibition, adhesion promotion, and biocompatibility. Valence and core-level x-ray photoelectron spectroscopy (XPS) were used to characterize the films. The valence band spectra obtained were compared with spectra generated from band structure calculations for various vanadium phosphates and from previously reported spectra of vanadium phosphates. Vanadium phosphate coatings were created by the reaction of vanadium metal and different phosphorus-oxygen containing acids: H 3 PO 4 , H 3 PO 3 , H 3 PO 2 , and H 2 P 2 O 7 . This article focuses upon the valence band region which shows significant differences between the four vanadium phosphate films formed as well as clear differences between the these phosphates and vanadium oxides. The valence band spectra are effectively interpreted by band structure calculations

  7. Importance of Vanadium-Catalyzed Oxidation of SO2to SO3in Two-Stroke Marine Diesel Engines

    DEFF Research Database (Denmark)

    Colom, Juan M.; Alzueta, María U.; Christensen, Jakob Munkholt

    2016-01-01

    Low-speed marine diesel engines are mostly operated on heavy fuel oils, which have a high content of sulfur andash, including trace amounts of vanadium, nickel, and aluminum. In particular, vanadium oxides could catalyze in-cylinderoxidation of SO2 to SO3, promoting the formation of sulfuric acid...... of the catalyticspecies within the engine. Experiments with different particle compositions (vanadium/sodium ratio) and temperatures (300−800 °C) show that both the temperature and sodium content have a major impact on the oxidation rate. Kinetic parameters forthe catalyzed reaction are determined, and the proposed...... kinetic model fits well with the experimental data. The impact of thecatalytic reaction is studied with a phenomenological zero-dimensional (0D) engine model, where fuel oxidation and SOxformation is modeled with a comprehensive gas-phase reaction mechanism. Results indicate that the oxidation of SO2...

  8. Formation of vanadium oxides with various morphologies by chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Su, Q.; Huang, C.K.; Wang, Y.; Fan, Y.C.; Lu, B.A.; Lan, W.; Wang, Y.Y. [Department of Physics, Lanzhou University, Lanzhou 730000 (China); Liu, X.Q. [Department of Physics, Lanzhou University, Lanzhou 730000 (China)], E-mail: xqliu@lzu.edu.cn

    2009-05-05

    We reported the formation of vanadium oxides with various morphologies, including V{sub 2}O{sub 5} rods, VO{sub x} microspheres, VO{sub 2} microblocks etc., by chemical vapor deposition using vanadyl acetylacetonate (VO(acac){sub 2}) powder as a vanadium precursor. The obtained samples were characterized by scanning electron microscopy (SEM), Raman scattering and X-ray diffraction (XRD). Results revealed that the morphologies and microstructures of vanadium oxides were significantly dependent on the depositing temperature. V{sub 2}O{sub 5} rods with a diameter of {approx}250 nm, VO{sub x} microstructure with V{sup 5+} and V{sup 4+} cations and VO{sub 2} microblocks were obtained at the depositing temperature of 500, 450-250 and 150 deg. C, respectively. VO{sub 2} structures were formed at the beginning of growth process, and V{sup 4+} cations were partially oxidized to V{sup 5+} cations at the higher depositing temperature (250-450 deg. C). Various morphologies of VO{sub x} were attributed to the mixed microstructure of V{sub 2}O{sub 5} and VO{sub 2}. The difference between V{sup 4+}-O and V{sup 5+}-O bonds induced the distortion and various structures in VO{sub x}. When the depositing temperature was as high as 500 deg. C, most of the V{sup 4+} cations were oxidized to V{sup 5+} cations and V{sub 2}O{sub 5} rods were obtained.

  9. Synthesis and Characterization of Vanadium Doped Zinc Oxide Thick Film for Chemical Sensor Application

    Directory of Open Access Journals (Sweden)

    Rayees Ahmad Zargar

    2015-01-01

    Full Text Available Zinc oxide and vanadium pentoxide nanoparticles derived by chemical coprecipitation route were used to cast Zn0.96V0.04O thick film by screen printing method. The structural, morphological, optical, and electrical properties of the film were characterized by powder XRD, SEM, Raman, UV-VIS, and DC conductivity techniques. XRD pattern, SEM image, and Raman spectrum of the film confirm the single phase formation of Wurtzite structure with preferential orientation along [101] plane, minor variation in lattice parameters, and vanadium ions substitution at zinc sites. Zn0.96V0.04O pellet has been used for sensing ammonia vapor concentrations in 20–50°C temperature range which exhibits maximum responsiveness and sensitivity at 30°C. The minor variations in resistance are observed with ammonia vapor concentration. The adsorption of ammonia vapors through weak hydrogen bonding and its insertion into lattice by nitrogen lone pairs donation at vacant/defect sites in lattice caused by vanadium doping are considered to explain gas sensing mechanism.

  10. Oxydehydrogenation of Propane over Vanadium Oxide Supported on Kieselguhr or MCM-41

    Directory of Open Access Journals (Sweden)

    BY Jibril

    2012-06-01

    Full Text Available Supported vanadium oxide (5 wt% on either Kieselguhr or mesoporous MCM-41 was prepared using impregnation method and tested as a catalyst in propane oxidative dehydrogenation (POD. The catalyst samples were characterized using X-ray elemental analysis, Brunauer-Emmett-Teller (BET physisorption, and Z-ray Photoelectron Spectroscopy (XPS. After impregnation, the catalyst surface area decreased compared with that of the support. More drastic decrease was observed in the case of MCM-41 (77% than the Kieselguhr supported sample (48%. There are also different degrees of vanadium oxide-support interaction as reflected by the XPS result. Si-O binding energy of 531.5 eV was observed on MCM-41-supported sample compared with 529.5 eV for the Kieselguhr-supported sample. The catalyst tests were conducted at atmospheric pressure, with a propane to oxygen ratio of 0.7 - 3.6 and a reaction temperature of 400 - 700 °C. Oxidative dehydrogenation and combustion products were observed. Minor cracking reaction products (methane, ethane, and ethene were also produced above 550 °C. The highest propene yield of 14% was obtained from the Kieselguhr-supported sample at 700 °C and with a C3 H8 /O2  ratio of 1.5.

  11. Influence of phosphorus and potassium impurities on the properties of vanadium oxide supported on TiO2

    NARCIS (Netherlands)

    van Hengstum, A.J.; Pranger, J.; van Ommen, J.G.; Gellings, P.J.

    1984-01-01

    The catalytic properties of vanadium oxide catalysts supported on TiO2 from Tioxide were strongly affected by phosphorus and potassium, present as impurities in the TiO2 support. The effects observed were stronaly dependent on the type of hydrocarbon oxidised. In the oxidation of toluene to benzoic

  12. In Situ Spectroscopic Investigation of Molecular Structures of Highly Dispersed Vanadium Oxide on Silica under Various Conditions

    NARCIS (Netherlands)

    Gao, X.; Bare, S.R.; Weckhuysen, B.M.; Wachs, I.E.

    1998-01-01

    The molecularly dispersed V2O5/SiO2 supported oxides were prepared by the incipient wetness impregnation of 2-propanol solutions of V-isopropoxide. The experimental maximum dispersion of surface vanadium oxide species on SiO2 was achieved at ~12 wt % V2O5 ( ~2.6 V atoms/nm^2 ). The surface

  13. Vanadium induces dopaminergic neurotoxicity via protein kinase Cdelta dependent oxidative signaling mechanisms: Relevance to etiopathogenesis of Parkinson's disease

    International Nuclear Information System (INIS)

    Afeseh Ngwa, Hilary; Kanthasamy, Arthi; Anantharam, Vellareddy; Song, Chunjuan; Witte, Travis; Houk, Robert; Kanthasamy, Anumantha G.

    2009-01-01

    Environmental exposure to neurotoxic metals through various sources including exposure to welding fumes has been linked to an increased incidence of Parkinson's disease (PD). Welding fumes contain many different metals including vanadium typically present as particulates containing vanadium pentoxide (V 2 O 5 ). However, possible neurotoxic effects of this metal oxide on dopaminergic neuronal cells are not well studied. In the present study, we characterized vanadium-induced oxidative stress-dependent cellular events in cell culture models of PD. V 2 O 5 was neurotoxic to dopaminergic neuronal cells including primary nigral dopaminergic neurons and the EC 50 was determined to be 37 μM in N27 dopaminergic neuronal cell model. The neurotoxic effect was accompanied by a time-dependent uptake of vanadium and upregulation of metal transporter proteins Tf and DMT1 in N27 cells. Additionally, vanadium resulted in a threefold increase in reactive oxygen species generation, followed by release of mitochondrial cytochrome c into cytoplasm and subsequent activation of caspase-9 (> fourfold) and caspase-3 (> ninefold). Interestingly, vanadium exposure induced proteolytic cleavage of native protein kinase Cdelta (PKCδ, 72-74 kDa) to yield a 41 kDa catalytically active fragment resulting in a persistent increase in PKCδ kinase activity. Co-treatment with pan-caspase inhibitor Z-VAD-FMK significantly blocked vanadium-induced PKCδ proteolytic activation, indicating that caspases mediate PKCδ cleavage. Also, co-treatment with Z-VAD-FMK almost completely inhibited V 2 O 5 -induced DNA fragmentation. Furthermore, PKCδ knockdown using siRNA protected N27 cells from V 2 O 5 -induced apoptotic cell death. Collectively, these results demonstrate that vanadium can exert neurotoxic effects in dopaminergic neuronal cells via caspase-3-dependent PKCδ cleavage, suggesting that metal exposure may promote nigral dopaminergic degeneration.

  14. Structure, activity and kinetics of supported molybdenum oxide and mixed molybdenum-vanadium oxide catalysts prepared by flame spray pyrolysis for propane OHD

    DEFF Research Database (Denmark)

    Høj, Martin; Kessler, Thomas; Beato, Pablo

    2013-01-01

    reflectance UV-vis spectroscopy and evaluated as catalysts for the oxidative dehydrogenation (ODH) of propane. The results show that samples with high specific surface areas between 122 and 182 m2/g were obtained, resulting in apparent MoOx and VOx surface densities from 0.7 to 7.7 nm -2 and 1.5 to 1.9 nm-2......, respectively. Raman spectroscopy, UV-vis spectroscopy and XRD confirmed the high dispersion of molybdenum and vanadia species on γ-Al2O3 as the main crystalline phase. Only at the highest loading of 15 wt% Mo, with theoretically more than monolayer coverage, some crystalline molybdenum oxide was observed....... For the mixed molybdenum-vanadium oxide catalysts the surface species were separate molybdenum oxide and vanadium oxide monomers at low loadings of molybdenum, but with increasing molybdenum loading interactions between surface molybdenum and vanadium oxide species were observed with Raman spectroscopy...

  15. Synthesis and characterization of alumina-supported vanadium oxide catalysts prepared by the molecular designed dispersion of VO(acac)2 complexes

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Baltes, M.; Voort, P. van der; Ramachandra Rao, R.; Catana, Gabriela; Schoonheydt, R.A.; Vansant, E.F.

    2000-01-01

    Alumina-supported vanadium oxide catalysts have been prepared by the molecular designed dispersion method, using the vanadyl acetylacetonate complex (VO(acac)2). The complex has been adsorbed on the support from solution, followed by thermal conversion into the corresponding supported vanadium oxide

  16. Can Supported Reduced Vanadium Oxides form H2from CH3OH? A Computational Gas-Phase Mechanistic Study.

    Science.gov (United States)

    González-Navarrete, Patricio; Andrés, Juan; Calatayud, Monica

    2018-02-01

    A detailed density functional theory study is presented to clarify the mechanistic aspects of the methanol (CH 3 OH) dehydrogenation process to yield hydrogen (H 2 ) and formaldehyde (CH 2 O). A gas-phase vanadium oxide cluster is used as a model system to represent reduced V(III) oxides supported on TiO 2 catalyst. The theoretical results provide a complete scenario, involving several reaction pathways in which different methanol adsorption sites are considered, with presence of hydride and methoxide intermediates. Methanol dissociative adsorption process is both kinetically and thermodynamically feasible on V-O-Ti and V═O sites, and it might lead to form hydride species with interesting catalytic reactivity. The formation of H 2 and CH 2 O on reduced vanadium sites, V(III), is found to be more favorable than for oxidized vanadium species, V(V), taking place along energy barriers of 29.9 and 41.0 kcal/mol, respectively.

  17. Ameliorative effect of vanadium on oxidative stress in stomach tissue of diabetic rats

    OpenAIRE

    Tugba Yilmaz-Ozden; Ozlem Kurt-Sirin; Sevim Tunali; Nuriye Akev; Ayse Can; Refiye Yanardag

    2014-01-01

    Between their broad spectrum of action, vanadium compounds are shown to have insulin mimetic/enhancing effects. Increasing evidence in experimental and clinical studies suggests that oxidative stress plays a major role in the pathogenesis of diabetes and on the onset of diabetic complications. Thus, preventive therapy can alleviate the possible side effects of the disease. The aim of the present study was to investigate the effect of vanadyl sulfate supplementation on the antioxidant system i...

  18. The anion-binding polyanion: a molecular cobalt vanadium oxide with anion-sensitive visual response.

    Science.gov (United States)

    Seliverstov, Andrey; Forster, Johannes; Heiland, Magdalena; Unfried, Johannes; Streb, Carsten

    2014-07-25

    An anionic molecular cobalt vanadium oxide cluster, (n-Bu4N)3[Co(AcO)V4O12] and its use as anion binding site is reported. Cluster formation is controlled by an anion-dependent dynamic solution equilibrium. Reversible anion binding in solution leads to significant spectral changes, allowing the ratiometric optical detection of the anion concentration in situ, even under harsh thermal conditions (T = 90 °C). Comparative studies showed that the spectral response is dependent on the type of anion so that carboxylates, weakly coordinating anions and halides can be distinguished.

  19. Development of Vanadium Phosphaate Catalysts for Methanol Production by Selective Oxidation of Methane.

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R.L.

    1997-10-01

    This DOE sponsored study of methane partial oxidation was initiated at Amax Research and Development in Golden, CO in October of 1993. Shortly thereafter the management of Amax closed this R&D facility and the PI moved to the Colorado School of Mines. The project was begun again after contract transfer via a novation agreement. Experimental work began with testing of vandyl pyrophosphate (VPO), a well known alkane selective oxidation catalyst. It was found that VPO was not a selective catalyst for methane conversion yielding primarily CO. However, promotion of VPO with Fe, Cr, and other first row transition metals led to measurable yields for formaldehyde, as noted in the summary table. Catalyst characterization studies indicated that the role of promoters was to stabilize some of the vanadium in the V{sup 5+} oxidation state rather than the V{sup 4+} state formally expected for (VO){sub 2}P{sub 2}O{sub 7}.

  20. Ameliorative effect of vanadium on oxidative stress in stomach tissue of diabetic rats

    Directory of Open Access Journals (Sweden)

    Tugba Yilmaz-Ozden

    2014-05-01

    Full Text Available Between their broad spectrum of action, vanadium compounds are shown to have insulin mimetic/enhancing effects. Increasing evidence in experimental and clinical studies suggests that oxidative stress plays a major role in the pathogenesis of diabetes and on the onset of diabetic complications. Thus, preventive therapy can alleviate the possible side effects of the disease. The aim of the present study was to investigate the effect of vanadyl sulfate supplementation on the antioxidant system in the stomach tissue of diabetic rats. Male Swiss albino rats were randomly divided into 4 groups: control; control+vanadyl sulfate; diabetic; diabetic+vanadyl sulfate. Diabetes was induced by intraperitoneal injection of streptozotocin (STZ; 65 mg/kg body weight. Vanadyl sulfate (100 mg/kg body weight was given daily by gavage for 60 days. At the last day of the experiment, stomach tissues were taken and homogenized to make a 10% (w/v homogenate. Catalase (CAT, superoxide dismutase (SOD, glutathione reductase (GR, glutathione peroxidase (GPx, glutathione-S-transferase (GST, myeloperoxidase (MPO, carbonic anhydrase (CA, glucose-6-phosphate dehydrogenase (G6PD and lactate dehydrogenase (LDH activities were determined in the stomach tissue. CAT, SOD, GR, GPx, GST, CA, G6PD and LDH activities were increased in diabetic rats when compared to normal rats. Vanadium treatment significantly reduced the elevated activities of GR, GPx, GST compared with the diabetic group whereas the decreases in CAT, SOD, CA, G6PD and LDH activities were insignificant. No significant change was seen for MPO activity between the groups. It was concluded that vanadium could be used for its ameliorative effect against oxidative stress in diabetes.

  1. Ameliorative effect of vanadium on oxidative stress in stomach tissue of diabetic rats.

    Science.gov (United States)

    Yilmaz-Ozden, Tugba; Kurt-Sirin, Ozlem; Tunali, Sevim; Akev, Nuriye; Can, Ayse; Yanardag, Refiye

    2014-05-01

    Between their broad spectrum of action, vanadium compounds are shown to have insulin mimetic/enhancing effects. Increasing evidence in experimental and clinical studies suggests that oxidative stress plays a major role in the pathogenesis of diabetes and on the onset of diabetic complications. Thus, preventive therapy can alleviate the possible side effects of the disease. The aim of the present study was to investigate the effect of vanadyl sulfate supplementation on the antioxidant system in the stomach tissue of diabetic rats. Male Swiss albino rats were randomly divided into 4 groups: control; control+vanadyl sulfate; diabetic; diabetic+vanadyl sulfate. Diabetes was induced by intraperitoneal injection of streptozotocin (STZ; 65 mg/kg body weight). Vanadyl sulfate (100 mg/kg body weight) was given daily by gavage for 60 days. At the last day of the experiment, stomach tissues were taken and homogenized to make a 10% (w/v) homogenate. Catalase (CAT), superoxide dismutase (SOD), glutathione reductase (GR), glutathione peroxidase (GPx), glutathione-S-transferase (GST), myeloperoxidase (MPO), carbonic anhydrase (CA), glucose-6-phosphate dehydrogenase (G6PD) and lactate dehydrogenase (LDH) activities were determined in the stomach tissue. CAT, SOD, GR, GPx, GST, CA, G6PD and LDH activities were increased in diabetic rats when compared to normal rats. Vanadium treatment significantly reduced the elevated activities of GR, GPx, GST compared with the diabetic group whereas the decreases in CAT, SOD, CA, G6PD and LDH activities were insignificant. No significant change was seen for MPO activity between the groups. It was concluded that vanadium could be used for its ameliorative effect against oxidative stress in diabetes.

  2. Mesoporous carbon-vanadium oxide films by resol-assisted, triblock copolymer-templated cooperative self-assembly.

    Science.gov (United States)

    Bhaway, Sarang M; Kisslinger, Kim; Zhang, Lihua; Yager, Kevin G; Schmitt, Andrew L; Mahanthappa, Mahesh K; Karim, Alamgir; Vogt, Bryan D

    2014-11-12

    Unlike other crystalline metal oxides amenable to templating by the combined assemblies of soft and hard chemistries (CASH) method, vanadium oxide nanostructures templated by poly(ethylene oxide-b-1,4-butadiene-b-ethylene oxide) (OBO) triblock copolymers are not preserved upon high temperature calcination in argon. Triconstituent cooperative assembly of a phenolic resin oligomer (resol) and an OBO triblock in a VOCl3 precursor solution enhances the carbon yield and can prevent breakout crystallization of the vanadia during calcination. However, the calcination environment significantly influences the observed mesoporous morphology in these composite thin films. Use of an argon atmosphere in this processing protocol leads to nearly complete loss of carbon-vanadium oxide thin film mesostructure, due to carbothermal reduction of vanadium oxide. This reduction mechanism also explains why the CASH method is not more generally successful for the fabrication of ordered mesoporous vanadia. Carbonization under a nitrogen atmosphere at temperatures up to 800 °C instead enables formation of a block copolymer-templated mesoporous structure, which apparently stems from the formation of a minor fraction of a stabilizing vanadium oxynitride. Thus, judicious selection of the inert gas for template removal is critical for the synthesis of well-defined, mesoporous vanadia-carbon composite films. This resol-assisted assembly method may generally apply to the fabrication of other mesoporous materials, wherein inorganic framework crystallization is problematic due to kinetically competitive carbothermal reduction processes.

  3. Mechanism for oxidation of n-butane to maleic anhydride on a vanadium-phosphorus oxide catalyst

    International Nuclear Information System (INIS)

    Nechiporuk, P.P.; Mishchenko, Yu.A.; Avetisov, A.K.; Dulin, D.A.; Kalinovskii, I.O.; Gel'bshtein, A.I.

    1987-01-01

    The values of the kinetic isotope effect have been determined in reactions where n-butane is converted to partial (maleic anhydride) and complete oxidation products on a vanadium-phosphorus oxide catalyst when hydrogen is replaced by deuterium in different positions of the n-butane molecule. The absence of intra- and intermolecular H-D exchange in butane under conditions of its catalytic oxidation has been established. On the basis of the observed effects it has been concluded that the interaction of n-butane with the surface of the catalyst is irreversible under the conditions of catalysis and that the rate-limiting stage due to cleavage of the C-H bond in a methylene group of butane is common to reactions of partial and complete oxidation of butane

  4. Nanostructural adsorption of vanadium oxide on functionalized graphene: a DFT study.

    Science.gov (United States)

    Ayissi, Serge; Palotás, Krisztián; Qin, Hanna; Yang, Lijuan; Charpentier, Paul A

    2016-10-26

    Rutile-monoclinic phase transitions of vanadium oxide (VO 2 ) nanocrystals adsorbed on graphene-based substrates are of current scientific interest, although their adsorption and growth mechanisms have not been investigated theoretically. In this study, we use density functional theory (DFT) calculations for determining the binding energies and predicting the corresponding directions of growth of VO 2 nanostructures (rutile and M 1 -monoclinic) interacting with both pure graphene and functionalized graphene nanoribbons. Several adsorption sites of pure graphene including the top, bridge, and hollow sites are considered, while additional adsorption sites of functionalized graphene nanoribbons, epoxy, alcohol and carboxylate are investigated. Vanadium oxide nanostructures are found to favor physical adsorption on the hollow sites of pure graphene, while chemical adsorption is favored on the carboxylate sites of functionalized graphene nanoribbons (FGNRs). Charge density maps showed the electron distribution originating from the interaction between VO 2 and graphene substrates, helping to understand the mechanism of charge transfer. Electronic local potentials showed vertical growth tendencies for rutile VO 2 , while M 1 -monoclinic VO 2 showed horizontal growth tendencies. Partial density of states (PDOS) helped examine the electronic structure of metallic rutile VO 2 binding to hollow and carboxylate sites of functionalized graphene. These results provide an improved understanding of the controlled and oriented growth of VO 2 nanocrystals on graphene-based substrates which can enable various properties such as the metal-insulator transition (MIT) of VO 2 in light regulation applications.

  5. Thermochromic properties of vanadium oxide films prepared by dc reactive magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Cui Haining [College of Physics, JiLin University, 2519 JieFangDaLu Road, 130021 ChangChun (China); Centro de Fisica e Departamento de Fisica, Universidade do Minho, 4710 Braga (Portugal)], E-mail: hncui@yahoo.co; Teixeira, Vasco [Centro de Fisica e Departamento de Fisica, Universidade do Minho, 4710 Braga (Portugal); Meng Lijian [Centro de Fisica e Departamento de Fisica, Universidade do Minho, 4710 Braga (Portugal); Departamento de Fisica, Instituto Superior de Engenharia do Porto, Rua de Sao Tome, 4200 Porto (Portugal); Wang Rong; Gao Jinyue [College of Physics, JiLin University, 2519 JieFangDaLu Road, 130021 ChangChun (China); Fortunato, Elvira [Dept. Ciencia dos Materiais, CENIMAT, Faculdade de Ciencias e Tecnologia da Universidade Nova de Lisboa, PT-2829-516 Caparica (Portugal)

    2008-02-15

    A transparent vanadium oxide film has been one of the most studied electrochromic (EC) and Thermochromic (TC) materials. Vanadium oxide films were deposited at different substrate temperatures up to 400 deg. C and different ratios of the oxygen partial pressure (P{sub O2}). SEM, AFM and X-ray diffraction's results show detail structure data of the films. IR mode assignments of the films measured by IR reflection-absorbance in NGIA (near grazing incidence angle) are given. It is found that the film has V{sub 2}O{sub 5} and VO{sub 2} combined structures. The films exhibit clear changes in transmittance when the environment temperature (T{sub e}) is varied, especially in the 3600-4000 cm{sup -1} range. Applying a T{sub e} that is higher than a critical temperature (T{sub c}) to the samples, the as-RT (room temperature) deposited film with 9% P{sub O2} has a transmittance variation of 30%, but the films that were deposited on a heated substrate of 400 deg. C have little variation. There is tendency of bigger variation in transmittance for the sample deposited at a larger P{sub O2}, when it is applied by 200 deg. C T{sub e}.

  6. Synthesis and characterization of nanocrystalline vanadium oxide thin films: electrochemical behavior by annealing in different atmosphere

    Science.gov (United States)

    Asiabar, M. Amiri; Mohaghegh, Z.; Ghodsi, F. E.

    2018-01-01

    Nanocrystalline vanadium oxide thin films were prepared using sol-gel dip-coating technique. The effect of heat treatment in different environment including air, N2, Ar, and O2 gas on the structural, optical, electrical, and electrochemical properties of nanocrystalline vanadium oxide thin films were investigated. The results indicated that the calculated average crystallite size was reduced by annealing in Ar environment. Scanning electron microscopy (SEM) images showed layered morphology on the surface of the film annealed in air atmosphere, whereas the film annealed under Ar and N2 ambient revealed granular and wrinkle morphology, respectively. This morphology altered to rather smooth surface by annealing in O2 environment. The optical bandgap of the films were found to be 1.75, 1.84, 2.08, and 2.10 eV annealed in air, O2, N2, and Ar environment, respectively. It was observed that the films annealed under Ar and N2 ambient had low resistivity ( 0.2 Ω cm) and high carrier concentration, while the film annealed in nitrogen environment showed higher mobility of charge carrier. The electrochemical measurements showed that annealing under N2 ambient improved the intercalation of Li ions, leading a higher interfacial capacitance of 19.18 mF Cm-2, and decreased the charge transfer resistance due to surface defects created by heat treatment in nitrogen environment.

  7. Preparation of silicon carbide-supported vanadium oxide and its application of removing NO by ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zi-Bo; Xu, Xu [Yangzhou University, College of Environmental Science and Engineering, Yangzhou, Jiangsu (China); Bai, Shu-Li [Wuyi University, College of Chemical and Environmental Engineering, Jiangmen, Guangdong (China); Guan, Yu-Jiang; Jiang, Sheng-Tao [Taizhou University, Environmental Engineering, Taizhou, Zhejiang (China)

    2017-03-15

    The aim of this work was to study the preparation of SiC-supported V{sub 2}O{sub 5} catalysts and the kinetics on selective catalytic reduction for NO with NH{sub 3} on the catalysts. Using incipient wetness impregnation methods, vanadium oxide was applied to silicon carbide to prepare a SiC-supported vanadium oxide. X-ray photoelectron spectroscopy analysis confirmed that V{sub 2}O{sub 5} existed in the prepared materials. Using the prepared materials as catalysts, selective catalytic reduction for NO by NH{sub 3} has been analyzed, and reaction kinetics on the catalysts was studied at 150-300 C. The obtained results showed that the reduction reaction on the catalysts is close to zero-order kinetics with respect to NH{sub 3}, first-order with respect to NO, and half-order to O{sub 2}. Apparent activation energy for the reduction reaction was found to be 38 kJ mol{sup -1}. The prepared materials are stable and reusable. (orig.)

  8. Ethylenediamine-functionalized graphene oxide incorporated acid-base ion exchange membranes for vanadium redox flow battery

    International Nuclear Information System (INIS)

    Liu, Shuai; Li, Dan; Wang, Lihua; Yang, Haijun; Han, Xutong; Liu, Biqian

    2017-01-01

    Highlights: • Ethylenediamine functionalized graphene oxide. • Layered structure of functionalized graphene oxide block vanadium ions crossover. • Protonated N-containing groups suppress vanadium ions permeation. • Ion transport channels are narrowed by electrostatic interactions. • Vanadium crossover decreased due to enhanced Donnan effect and special structure. - Abstract: As a promising large-scale energy storage battery, vanadium redox flow battery (VRFB) is urgently needed to develop cost-effective membranes with excellent performance. Novel acid-base ion exchange membranes (IEMs) are fabricated based on sulfonated poly(ether ether ketone) (SPEEK) matrix and modified graphene oxide (GO) by solution blending. N-based functionalized graphene oxide (GO-NH 2 ) is fabricated by grafting ethylenediamine onto the edge of GO via a facile method. On one hand, the impermeable layered structures effectively block ion transport pathway to restrain vanadium ions crossover. On the other hand, acid-base pairs form between −SO 3 − groups and N-based groups on the edge of GO nanosheets, which not only suppress vanadium ions contamination but also provide a narrow pathway for proton migration. The structure is beneficial for achieving an intrinsic balance between conductivity and permeability. By altering amounts of GO-NH 2 , a sequence of acid-base IEMs are characterized in detail. The single cells assembled with acid-base IEMs show self-discharge time for 160 h, capacity retention 92% after 100 cycle, coulombic efficiency 97.2% and energy efficiency 89.5%. All data indicate that acid-base IEMs have promising prospects for VRFB applications.

  9. A low-energy ion scattering (LEIS) study of the influence of the vanadium concentration on the activity of vanadium-niobium oxide catalysts for the oxidative dehydrogenation of propane

    NARCIS (Netherlands)

    Smits, R.H.H.; Smits, R.H.H.; Seshan, Kulathuiyer; Ross, J.R.H.; Ross, J.R.H.; van den Oetelaar, L.C.A.; Helwegen, J.H.J.M.; Anantharaman, M.R.; Brongersma, H.H.

    1995-01-01

    A series of vanadium-niobium oxide catalysts in which the vanadia content varies between 0.3 and 18 mol% was prepared by coprecipitation. These catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), low-energy ion scattering (LEIS), and by catalytic testing

  10. Electrochemical intercalation of lithium into polypyrrole/silver vanadium oxide composite used for lithium primary batteries

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong-Won; Popov, Branko N. [Center for Electrochemical Engineering, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208 (United States)

    2006-10-20

    Hybrid composites of polypyrrole (PPy) and silver vanadium oxide (SVO) used for lithium primary batteries were chemically synthesized by an oxidative polymerization of pyrrole monomer on the SVO surface in an acidic medium. The composite electrode exhibited higher discharge capacity and better rate capability as compared with the pristine SVO electrode. The improvement in electrochemical performance of the composite electrode was due to PPy which accommodates lithium ions and also enhances the SVO utilization. Chronoamperometric and ac-impedance measurements indicated that lithium intercalation proceeds under the mixed control by interfacial charge transfer and diffusion. The enhanced SVO utilization in the composite electrode results from a facilitated kinetics of interfacial charge transfer in the presence of PPy. (author)

  11. Electrochemical intercalation of lithium into polypyrrole/silver vanadium oxide composite used for lithium primary batteries

    Science.gov (United States)

    Lee, Jong-Won; Popov, Branko N.

    Hybrid composites of polypyrrole (PPy) and silver vanadium oxide (SVO) used for lithium primary batteries were chemically synthesized by an oxidative polymerization of pyrrole monomer on the SVO surface in an acidic medium. The composite electrode exhibited higher discharge capacity and better rate capability as compared with the pristine SVO electrode. The improvement in electrochemical performance of the composite electrode was due to PPy which accommodates lithium ions and also enhances the SVO utilization. Chronoamperometric and ac-impedance measurements indicated that lithium intercalation proceeds under the mixed control by interfacial charge transfer and diffusion. The enhanced SVO utilization in the composite electrode results from a facilitated kinetics of interfacial charge transfer in the presence of PPy.

  12. Self-assembly of a tetrahedral 58-nuclear barium vanadium oxide cluster.

    Science.gov (United States)

    Kastner, Katharina; Puscher, Bianka; Streb, Carsten

    2013-01-07

    We report the synthesis and characterization of a molecular barium vanadium oxide cluster featuring high nuclearity and high symmetry. The tetrameric, 2.3 nm cluster H(5)[Ba(10)(NMP)(14)(H(2)O)(8)[V(12)O(33)](4)Br] is based on a bromide-centred, octahedral barium scaffold which is capped by four previously unknown [V(12)O(33)](6-) clusters in a tetrahedral fashion. The compound represents the largest polyoxovanadate-based heterometallic cluster known to date. The cluster is formed in organic solution and it is suggested that the bulky N-methyl-2-pyrrolidone (NMP) solvent ligands allow the isolation of this giant molecule and prevent further condensation to a solid-state metal oxide. The cluster is fully characterized using single-crystal XRD, elemental analysis, ESI mass spectrometry and other spectroscopic techniques.

  13. Rational synthesis of silver vanadium oxides/polyaniline triaxial nanowires with enhanced electrochemical property.

    Science.gov (United States)

    Mai, Liqiang; Xu, Xu; Han, Chunhua; Luo, Yanzhu; Xu, Lin; Wu, Yimin A; Zhao, Yunlong

    2011-11-09

    We designed and successfully synthesized the silver vanadium oxides/polyaniline (SVO/PANI) triaxial nanowires by combining in situ chemical oxidative polymerization and interfacial redox reaction based on β-AgVO(3) nanowires. The β-AgVO(3) core and two distinct layers can be clearly observed in single triaxial nanowire. Fourier transformed infrared spectroscopic and energy dispersive X-ray spectroscopic investigations indicate that the outermost layer is PANI and the middle layer is Ag(x)VO((2.5+0.5x)) (x < 1), which may result from the redox reaction of Ag(+) and aniline monomers at the interface. The presence of the Ag particle in a transmission electron microscopy image confirms the occurrence of the redox reaction. The triaxial nanowires exhibit enhanced electrochemical performance. This method is shown to be an effective and facile technique for improving the electrochemical performance and stability of nanowire electrodes for applications in Li ion batteries.

  14. ALTERNATIVE ROUTES FOR CATALYST PREPARATION: USE OF ULTRASOUND AND MICROWAVE IRRADIATION FOR THE PREPARATION OF VANADIUM PHOSPHORUS OXIDE CATALYST AND ITS ACTIVITY FOR HYDROCARBON OXIDATION

    Science.gov (United States)

    Vanadium phosphorus oxide (VPO) is a well-known catalyst used for the vapor phase n-butane oxidation to maleic anhydride. It is prepared by a variety of methods, all of which, however, eventually result in the same active phase. The two main methods for the preparation of its pr...

  15. Application of vanadium incorporated phosphomolybdate supported on the modified kaolinin synthesis of diphenyl carbonate by oxidative carbonylation with phenol

    Directory of Open Access Journals (Sweden)

    Peng Meng

    2017-01-01

    Full Text Available Keggin-type molybdophosphoric acid, molybdophosphoric salt and vanadium incorporated molybdophosphoric salt supported on the modified kaolin (MK were investigated as redox co-catalysts for the oxidative carbonylation of phenol to diphenyl carbonate (DPC in the absence of solvent. The 20 wt.% of MnAMPV5 (one kind of vanadium incorporated molybdophosphoric salt loaded on MK showed the highest catalytic activity with the yield of 24.68% and a TON of 306, while the selectivity amounts to nearly 100% in all the carbonylation reactions. The catalysts were characterized by XRD, BET, XPS and H2-TPR. The reusability study showed that the catalysts were stable and active.

  16. Low-dimensional, hinged bar-code metal oxide layers and free-standing, ordered organic nanostructures from turbostratic vanadium oxide.

    Science.gov (United States)

    O'Dwyer, Colm; Lavayen, Vladimir; Fuenzalida, David; Lozano, Harold; Santa Ana, Maria A; Benavente, Eglantina; González, Guillermo; Sotomayor Torres, Clivia M

    2008-07-01

    Both low-dimensional bar-coded metal oxide layers, which exhibit molecular hinging, and free-standing organic nanostructures can be obtained from unique nanofibers of vanadium oxide (VO(x)). The nanofibers are successfully synthesized by a simple chemical route using an ethanolic solution of vanadium pentoxide xerogel and dodecanethiol resulting in a double bilayered laminar turbostratic structure. The formation of vanadium oxide nanofibers is observed after hydrothermal treatment of the thiol-intercalated xerogel, resulting in typical lengths in the range 2-6 microm and widths of about 50-500 nm. We observe concomitant hinging of the flexible nanofiber lamina at periodic hinge points in the final product on both the nanoscale and molecular level. Bar-coded nanofibers comprise alternating segments of organic-inorganic (thiols-VO(x)) material and are amenable to segmented, localized metal nanoparticle docking. Under certain conditions free-standing bilayered organic nanostructures are realized.

  17. Transformers: the changing phases of low-dimensional vanadium oxide bronzes.

    Science.gov (United States)

    Marley, Peter M; Horrocks, Gregory A; Pelcher, Kate E; Banerjee, Sarbajit

    2015-03-28

    In this feature article, we explore the electronic and structural phase transformations of ternary vanadium oxides with the composition MxV2O5 where M is an intercalated cation. The periodic arrays of intercalated cations ordered along quasi-1D tunnels or layered between 2D sheets of the V2O5 framework induce partial reduction of the framework vanadium atoms giving rise to charge ordering patterns that are specific to the metal M and stoichiometry x. This periodic charge ordering makes these materials remarkably versatile platforms for studying electron correlation and underpins the manifestation of phenomena such as colossal metal-insulator transitions, quantized charge corrals, and superconductivity. We describe current mechanistic understanding of these emergent phenomena with a particular emphasis on the benefits derived from scaling these materials to nanostructured dimensions wherein precise ordering of cations can be obtained and phase relationships can be derived that are entirely inaccessible in the bulk. In particular, structural transformations induced by intercalation are dramatically accelerated due to the shorter diffusion path lengths at nanometer-sized dimensions, which cause a dramatic reduction of kinetic barriers to phase transformations and facilitate interconversion between the different frameworks. We conclude by summarizing numerous technological applications that have become feasible due to recent advances in controlling the structural chemistry and both electronic and structural phase transitions in these versatile frameworks.

  18. Vanadium carbide and graphite promoted Pd electrocatalyst for ethanol oxidation in alkaline media

    Science.gov (United States)

    Yan, Zaoxue; Zhang, Mingmei; Xie, Jimin; Shen, Pei Kang

    2013-12-01

    The vanadium carbide particles with the diameter of 1-3 nm on graphitized resin (GC-V8C7) are synthesized through ionic exchange process. The materials are characterized by XRD, Raman, TEM, SEM and EDS measurements. The results prove that the ion-exchange resin as both carbon source and dispersion media favors the formation of very uniform and small (1-3 nm) V8C7 particles, and protect the V8C7 from conglomeration even at the temperature of 1500 °C. Meanwhile, the vanadium compound is found efficient catalytic effect on graphitization of ion-exchange resin, leading to high graphitization degree of GC-V8C7. Pd particles are loaded on the GC-V8C7 materials as electrocatalyst (Pd/GC-V8C7) for ethanol oxidation in alkaline media. The cyclic voltammograms measurements show that both V8C7 and GC (graphitized ion-exchange resin) give Pd electrocatalyst improved catalytic performance in activity, stability and overpotential, compared with that of Pd supporting on Vulcan XC-72 carbon (Pd/C). The present synthesizing method of GC-V8C7 is simple and effective, which can be readily scaled up for mass production of other nanomaterials.

  19. Highly efficient electrochemical responses on single crystalline ruthenium-vanadium mixed metal oxide nanowires.

    Science.gov (United States)

    Chun, Sung Hee; Choi, Hyun-A; Kang, Minkyung; Koh, Moonjee; Lee, Nam-Suk; Lee, Sang Cheol; Lee, Minyung; Lee, Youngmi; Lee, Chongmok; Kim, Myung Hwa

    2013-09-11

    Highly efficient single crystalline ruthenium-vanadium mixed metal oxide (Ru1-xVxO2, 0≤x≤1) nanowires were prepared on a SiO2 substrate and a commercial Au microelectrode for the first time through a vapor-phase transport process by adjusting the mixing ratios of RuO2 and VO2 precursors. Single crystalline Ru1-xVxO2 nanowires show homogeneous solid-solution characteristics as well as the distinct feature of having remarkably narrow dimensional distributions. The electrochemical observations of a Ru1-xVxO2 (x=0.28 and 0.66)-decorated Au microelectrode using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) demonstrate favorable charge-transfer kinetics of [Fe(CN)6]3-/4- and Ru(NH3)6(3+/2+) couples compared to that of a bare Au microelectrode. The catalytic activity of Ru1-xVxO2 for oxygen and H2O2 reduction at neutral pH increases as the fraction of vanadium increases within our experimental conditions, which might be useful in the area of biofuel cells and biosensors.

  20. Influence of doping on the properties of vanadium oxide gel films

    Energy Technology Data Exchange (ETDEWEB)

    Pergament, A L; Velichko, A A; Berezina, O Ya; Kazakova, E L; Kuldin, N A; Artyukhin, D V [Physics and Technology Department, Petrozavodsk State University, Petrozavodsk 185910 (Russian Federation)], E-mail: aperg@psu.karelia.ru

    2008-10-22

    The effect of doping with H and W on the properties of V{sub 2}O{sub 5} and VO{sub 2} derived from V{sub 2}O{sub 5} gel has been studied. It is shown that the treatment of V{sub 2}O{sub 5} in low-temperature RF hydrogen plasma for 1-10 min leads to either hydration of vanadium pentoxide or its reduction (depending on the treatment conditions) to lower vanadium oxides. For some samples, which are subject to plasma treatment in the discharge active zone, a non-ordinary temperature dependence of resistance, with a maximum at T{approx}100 K, is observed. For W-doped VO{sub 2} films, it is shown that substitution of V{sup 4+} with W{sup 6+} results in a decrease of the temperature of the metal-insulator transition. Also, it has been shown that the doping of initial films with {approx}3 at.% of W reduces the statistical scatter in the threshold parameters of the switching devices with S-shaped I-V characteristics on the basis of V{sub 2}O{sub 5} gel films. (fast track communication)

  1. Surfactant-Free Vanadium Oxides from Reverse Micelles and Organic Oxidants: Solution Processable Nanoribbons with Potential Applicability as Battery Insertion Electrodes Assembled in Different Configurations.

    Science.gov (United States)

    Tartaj, Pedro; Amarilla, Jose M; Vazquez-Santos, Maria B

    2015-11-17

    Vanadium oxides similar to other metal transition oxides are prototypes of multifunctionality. Implementing new synthesis routes that lead to dry vanadium oxide nanomaterials with good functional and structural properties as well as good processing capabilities is thus of general interest. Here we report a facile method based on reverse micelles for the growth at room temperature and atmospheric pressure of surfactant-free vanadium oxide nanoribbons that retain after drying excellent solution-processable capabilities. Essential for the success of the method is the use of a soluble organic oxidant that acts as oxidant and cosurfactant during the synthesis, and facilitates surfactant removal with a simple washing protocol. Interestingly, this simple surfactant removal protocol could be of general applicability. As a proof-of-concept of the functional, structural, and processing capabilities of the dry vanadium oxide nanoribbons here prepared, we have checked their lithium insertion capabilities as battery cathodes built upon different configurations. Specifically, we show efficient insertion both in dry nanoribbons processed as films using doctor blade and organic solvents and in dry nanoribbons infiltrated in three-dimensional metal collectors from aqueous suspensions.

  2. The ability of silicide coating to delay the catastrophic oxidation of vanadium under severe conditions

    Energy Technology Data Exchange (ETDEWEB)

    Chaia, N., E-mail: nabil.chaia@univ-lorraine.fr [Université de Lorraine, Institut Jean Lamour – UMR7198, Boulevard des Aiguillettes, BP70239, 54506 Vandoeuvre-lès-Nancy Cedex (France); Mathieu, S., E-mail: stephane.mathieu@univ-lorraine.fr [Université de Lorraine, Institut Jean Lamour – UMR7198, Boulevard des Aiguillettes, BP70239, 54506 Vandoeuvre-lès-Nancy Cedex (France); Rouillard, F., E-mail: fabien.rouillard@cea.fr [CEA, DEN, DPC, SCCME, Laboratoire d’Etude de la Corrosion Non Aqueuse, F-91191 Gif-sur-Yvette (France); Vilasi, M., E-mail: michel.vilasi@univ-lorraine.fr [Université de Lorraine, Institut Jean Lamour – UMR7198, Boulevard des Aiguillettes, BP70239, 54506 Vandoeuvre-lès-Nancy Cedex (France)

    2015-02-15

    Highlights: • Oxidation protection is due to the formation of a pure silica layer. • V–4Cr–4Ti with V{sub x}Si{sub y} silicide coating withstands 400 1-h cycles (1100 °C-T{sub amb}) in air. • Three-point flexure testing at 950 °C and 75 MPa does not induce coating breakdown. • No delamination between coating and substrate is observed in any test. - Abstract: V–4Cr–4Ti vanadium alloy is a potential cladding material for sodium-cooled fast-neutron reactors (SFRs). However, its affinity for oxygen and the subsequent embrittlement that oxygen induces causes a need for an oxygen diffusion barrier, which can be obtained by manufacturing a multi-layered silicide coating. The present work aims to evaluate the effects of thermal cycling (using a cyclic oxidation device) and tensile and compressive stresses (using the three-point flexure test) on the coated alloy system. Tests were performed in air up to 1100 °C, which is 200 °C higher than the accidental temperature for SFR applications. The results showed that the VSi{sub 2} coating was able to protect the vanadium substrate from oxidation for more than 400 1-h cycles between 1100 °C and room temperature. The severe bending applied to the coated alloy at 950 °C using a load of 75 MPa did not lead to specimen breakage. It can be suggested that the VSi{sub 2} coating has mechanical properties compatible with the V–4Cr–4Ti alloy for SFR applications.

  3. Insulin mimesis of vanadium derivatives. Oxidation of cysteine by V(V) oxo diperoxo complexes.

    Science.gov (United States)

    Ballistreri, F P; Barbuzzi, E G; Tomaselli, G A; Toscano, R M

    2000-05-30

    Kinetics of the oxidation of cysteine to cystine by four V(V) oxo diperoxo complexes [VO(O2)2L] possessing insulin mimetic activity, where L = oxalate(oxa), picolinate (pic), bipyridil (bipy), phenanthroline(phen), were performed in water at 10 degrees C by the UV or stopped-flow technique. 51V NMR spectra indicate that oxa undergoes a total ligand dissociation differently from pic, bipy and phen which hold their ligands also in solution. The observed reactivity is deeply affected by the identity of the ligand. The process seems to require coordination of the cysteine to the metal, followed by oxidation within the coordination sphere. In this respect phen and bipy make the coordination of cysteine much easier than oxa and pic. It is suggested, also on the basis of some preliminary observations concerning the oxidation of C6H5CH2SH, that the oxidation process is triggered by an electron transfer step. The rate of this step would be higher for oxa and pic than for phen and bipy. The observation that the oxidative ability of these vanadium peroxo complexes is dependent upon the nature of the ligands might match the analogous finding that their insulin mimetic activity is also modulated by the ligand identities.

  4. Correlation with the redox V{sup 5+}/V{sup 4+} ratio in vanadium phosphorus oxide catalysts for mild oxidation of n-butane to maleic anhydride

    Energy Technology Data Exchange (ETDEWEB)

    Abon, M.; Volta, J.C. [Institut de Recherches sur la Catalyse, CNRS, 2 Avenue Albert Einstein, 69626 Cedex Villeurbanne (France); Herrmann, J.M. [Laboratoire de Photocatalyse, Catalyse et Environnement, CNRS (IFOS), Ecole Centrale de Lyon, BP 163, 69131 Cedex Ecully (France)

    2001-11-15

    The redox properties of vanadium phosphorus oxide (VPO) catalysts have been compared to their catalytic performance in fuel-lean conditions for two sets of (VO){sub 2}P{sub 2}O{sub 7} catalysts obtained after calcination under nitrogen at different temperatures or after different postoxidation periods under dioxygen. It is shown that doping the VPO catalysts with Co and Mo makes possible for the catalyst to produce maleic anhydride in fuel-rich conditions. In both situations, catalytic performances are dependent on the vanadium oxidation state of the catalysts.

  5. Synthesis of vanadium oxides 5 wt.%VO2–MxOy by sol–gel process ...

    Indian Academy of Sciences (India)

    easy conversion between oxides of different stoichiome- tries. The principal vanadium oxides are V2O5, VO2, V2O3, ... orthotetraethyl and 13 mL of ethanol or 11·2 mL of propanol. The mixture was stirred for 24 h, and then 4·5 mL of HCl ... recorded using MgO as reference. Scanning electron microscopy (SEM) with energy ...

  6. Induced dipole in vanadium-doped zinc oxide nanosheets and its effects on photoelectrochemical water splitting

    Science.gov (United States)

    Lee, Song Mi; Shin, Sung-Ho; Nah, Junghyo; Lee, Min Hyung

    2017-09-01

    Appropriate control of energy band bending at the interface between semiconductors and electrolytes are closely related to performance of photoelectrochemical (PEC) water splitting. Dipoles formed near the surface of semiconductors induces energy band bending at the interface. Energy band bending control has been demonstrated by employing charged molecules and piezoelectric materials. However, chemical and piezoelectric approaches have demerit of chemical instability and inducement of instantaneous dipole, respectively. To overcome these problems, we adopted the ferroelectric material for PEC water splitting, where spontaneous dipoles in the material can be oriented by applying external electric field. In this work, we hydrothermally synthesized vanadium (V)-doped ferroelectric ZnO nanosheets and employed to systematically investigate the dipole effect on performance of V-doped ZnO PEC for water oxidation. Consequently, positively polarized V-doped ZnO photoanode exhibits 125% enhanced water splitting efficiency compared to negatively polarized ones due to favorable band bending for carrier transport from semiconductor to water.

  7. Oxidation States of Grim Glasses in EET79001 Based on Vanadium Valence

    Science.gov (United States)

    Sutton, S. R.; Rao, M. N.; Nyquist, L. E.

    2010-01-01

    Gas-rich impact-melt (GRIM) glasses in SNC meteorites are very rich in Martian atmospheric noble gases and sulfur suggesting a possible occurrence of regolith-derived secondary mineral assemblages in these samples. Previously, we have studied two GRIM glasses, 506 and 507, from EET79001 Lith A and Lith B, respectively, for elemental abundances and spatial distribution of sulfur using EMPA (WDS) and FE-SEM (EDS) techniques and for sulfur-speciation using K-edge XANES techniques. These elemental and FE-SEM micro-graph data at several locations in the GRIM glasses from Shergotty (DBS), Zagami 994 and EET79001, Lith B showed that FeO and SO3 are positively correlated (SO3 represents a mixture of sulfide and sulfate). FE-SEM (EDS) study revealed that the sulfur-rich pockets in these glasses contain numerous micron-sized iron-sulfide (Fe-S) globules sequestered throughout the volume. However, in some areas (though less frequently), we detected significant Fe-S-O signals suggesting the occurrence of iron sulfate. These GRIM glasses were studied by K-edge microXANES techniques for sulfur speciation in association with iron in sulfur-rich areas. In both samples, we found the sulfur speciation dominated by sulfide with minor oxidized sulfur mixed in with various proportions. The abundance of oxidized sulfur was greater in 506 than in 507. Based on these results, we hypothesize that sulfur initially existed as sulfate in the glass precursor materials and, on shock-impact melting of the precursor materials producing these glasses, the oxidized sulfur was reduced to predominately sulfide. In order to further test this hypothesis, we have used microXANES to measure the valence states of vanadium in GRIM glasses from Lith A and Lith B to complement and compare with previous analogous measurements on Lith C (note: 506 and 507 contain the largest amounts of martian atmospheric gases but the gas-contents in Lith C measured by are unknown). Vanadium is ideal for addressing this re

  8. Dodecahedron-Shaped Porous Vanadium Oxide and Carbon Composite for High-Rate Lithium Ion Batteries.

    Science.gov (United States)

    Zhang, Yifang; Pan, Anqiang; Wang, Yaping; Wei, Weifeng; Su, Yanhui; Hu, Jimei; Cao, Guozhong; Liang, Shuquan

    2016-07-13

    Carbon-based nanocomposites have been extensively studied in energy storage and conversion systems because of their superior electrochemical performance. However, the majority of metal oxides are grown on the surface of carbonaceous material. Herein, we report a different strategy of constructing V2O5 within the metal organic framework derived carbonaceous dodecahedrons. Vanadium precursor is absorbed into the porous dodecahedron-shaped carbon framework first and then in situ converted into V2O5 within the carbonaceous framework in the annealing process in air. As cathode materials for lithium ion batteries, the porous V2O5@C composites exhibit enhanced electrochemical performance, due to the synergistic effect of V2O5 and carbon composite.

  9. Adsorption and photocatalytic degradation of malachite green by vanadium doped zinc oxide nanoparticles.

    Science.gov (United States)

    Khezami, L; Taha, Kamal K; Ghiloufi, Imed; El Mir, Lassaad

    2016-01-01

    Herein the degradation of malachite green (MG) dye from aqueous medium by vanadium doped zinc oxide (ZnO:V3%) nanopowder was investigated. The specific surface area and pore volume of the nanopowder was characterized by nitrogen adsorption method. Batch experimental procedures were conducted to investigate the adsorption and photocatalytic degradation of MG dye. Adsorption kinetics investigations were performed by varying the amount of the catalyst and the initial dye concentrations. Adsorption and photocatalytic degradation data were modeled using the Lagergren pseudo-first-order and second-order kinetic equation. The results showed that the ZnO:V3% nanopowder was particularly effective for the removal of MG and data were found to comply with Lagergreen pseudo-first-order kinetic model.

  10. Phase formation polycrystalline vanadium oxide via thermal annealing process under controlled nitrogen pressure

    Science.gov (United States)

    Jessadaluk, S.; Khemasiri, N.; Rahong, S.; Rangkasikorn, A.; Kayunkid, N.; Wirunchit, S.; Horprathum, M.; Chananonnawathron, C.; Klamchuen, A.; Nukeaw, J.

    2017-09-01

    This article provides an approach to improve and control crystal phases of the sputtering vanadium oxide (VxOy) thin films by post-thermal annealing process. Usually, as-deposited VxOy thin films at room temperature are amorphous phase: post-thermal annealing processes (400 °C, 2 hrs) under the various nitrogen (N2) pressures are applied to improve and control the crystal phase of VxOy thin films. The crystallinity of VxOy thin films changes from amorphous to α-V2O5 phase or V9O17 polycrystalline, which depend on the pressure of N2 carrier during annealing process. Moreover, the electrical resistivity of the VxOy thin films decrease from 105 Ω cm (amorphous) to 6×10-1 Ω cm (V9O17). Base on the results, our study show a simply method to improve and control phase formation of VxOy thin films.

  11. Highly Stable Aqueous Zinc-ion Storage Using Layered Calcium Vanadium Oxide Bronze Cathode

    KAUST Repository

    Xia, Chuan

    2018-02-12

    Cost-effective aqueous rechargeable batteries are attractive alternatives to non-aqueous cells for stationary grid energy storage. Among different aqueous cells, zinc-ion batteries (ZIBs), based on Zn2+ intercalation chemistry, stand out as they can employ high-capacity Zn metal as anode material. Herein, we report a layered calcium vanadium oxide bronze as cathode material for aqueous Zn batteries. For the storage of Zn2+ ions in aqueous electrolyte, we demonstrate that calcium based bronze structure can deliver a high capacity of 340 mAh g-1 at 0.2 C, good rate capability and very long cycling life (96% retention after 3000 cycles at 80 C). Further, we investigate the Zn2+ storage mechanism, and the corresponding electrochemical kinetics in this bronze cathode. Finally, we show that our Zn cell delivers an energy density of 267 Wh kg-1 at a power density of 53.4 W kg-1.

  12. Duttonite, a new quadrivalent vanadium oxide from the Peanut mine, Montrose County, Colorado

    Science.gov (United States)

    Thompson, Mary Eleanor; Roach, Carl Houston; Meyrowitz, Robert

    1956-01-01

    Duttonite, a new quadrivalent vanadium oxide from the Peanut mine, Montrose County, Colo., has the formula VO(OH)2. The mineral occurs as crusts and coatings of pale-brown transparent platy crystals, as one of the first oxidation products of montroseite ore. It is associated with melanovanadite and abundant crystals of hexagonal native selenium. Duttonite is biaxial positive, 2V is about 60°, dispersion is r v, moderate; X = a, pale pinkish brown; Y = c, pale yellow-brown; Z = b, pale brown; α = 1.810 ± 0.003, β = 1.900 ± 0.003, γ > 2.01. The hardness is about 2.5; the calculated specific gravity is 3.24. The chemical analysis shows, in percent: V2o3 2.6, V2O4 75.3, FeO 0.4, H2O 18.1, insoluble 4.2, total 100.6. Duttonite is monoclinic, ao = 8.80 ± 0.02A, bo - 3.95 ± 0.01A, co - 5.96 ± 0.02A, β = 90°401 ± 51. The space group is I2/c, (C62h); the cell contents are 4[VO(OH)2]. The crystals are strongly pseudo-orthorhombic, and the structure departs only slightly from the space group Imcm. Duttonite is named for Captain Clarence Edward Dutton (1841-1912). A detailed study of the geology, geochemistry, and mineralogy of the vanadium-uranium ore at the Peanut mine, Montrose County, Colo., was begun early in 1954 by Carl H. Roach of the U. S. Geological Survey. A number of rare and new minerals were found in the ore and the study of these samples was undertaken by Mary E. Thompson. Duttonite is the first new vanadium mineral to be described from the Peanut mine. It is named for Captain Clarence Edward Dutton (1841-1912), who was one of the first geologists to work in the Colorado Plateau region and who was a member of the U. s. Geological Survey from 1879-91. We are indebted to the following members of the Geological Surbey: K. E. Valentine for spectrographic analyses of duttonite, and M. E. Mrose and H. T. Evans, Jr., for measurement of the unit cell constants. This work is part of a program being conducted by the U. S. Geological Survey on behalf of the

  13. Surface and Bulk Electronic Structure and Chemisorption Properties of Titanium and Vanadium Oxides

    Science.gov (United States)

    Smith, Kevin Eugene

    The unusual electronic properties of Ti _2O_3 and V _2O_3, in particular the metal-insulator transitions which they undergo, have produced widespread interest in the physics of these materials, while the use of titanium and vanadium oxides as catalysts and catalyst supports makes a detailed understanding of their surface properties of great importance. The electronic structure and gas adsorption properties of single crystal titanium and vanadium oxides have been studied here using ultraviolet and x-ray photoemission spectroscopy, synchrotron radiation, Auger electron spectroscopy and low energy electron diffraction. Spatially anisotropic resonant photoemission from 3d states in Ti_2O_3 and V_2O_3 was observed and shown to originate from localised molecular orbitals. This contrasts with an energy analysis of the photoemission data which revealed dispersing, delocalised d-bands in both oxides. A large resonance was observed in the O 2p emission at the cation 3p to 3d absorption edge in Ti_2O _3 which is inconsistent with hybridisation, indicating the possible existence of inter-atomic resonances. The first detailed photoemission observation of metal-insulator transitions in Cr-doped V_2O _3 is reported; large changes in the density of states at the Fermi level are seen at these transitions. The surface electronic structure of single crystal TiO_2, Ti_2O _3 and V_2O _3 was found to be indistinguishable from that of the bulk. The interaction of SO_2 with these oxides was extensively studied since sulfur is a notorious catalyst poison. SO_2 reacts vigorously with the titanium oxides, dissociating in the presence of Ti^{3+} cations to form TiO_2 and TiS _2; in their absence no reaction occurs. Surprisingly, SO_2 reacts very weakly with V _2O_3, adsorbing in both dissociated and molecular form. Additionally, only a weak reaction of H_2S and TiO _2 was found. The electronic structure of these oxides is shown to be extremely complex, displaying both localised and

  14. Investigation on vanadium oxide thin films deposited by spray pyrolysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Margoni, Mudaliar Mahesh; Mathuri, S.; Ramamurthi, K., E-mail: krmurthin@yahoo.co.in, E-mail: ramamurthi.k@ktr.srmuniv.ac.in [Crystal Growth and Thin Film Laboratory, Department of Physics and Nanotechnology, Faculty of Engineering and Technology, SRM University, Kattankulathur – 603 203, Kancheepuram Dt., Tamil Nadu (India); Babu, R. Ramesh [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli – 620024, Tamil Nadu (India); Sethuraman, K. [School of Physics, Madurai Kamaraj University, Madurai – 625 021, Tamil Nadu (India)

    2016-05-06

    Vanadium oxide thin films were deposited at 400 °C by spray pyrolysis technique using 0.1 M aqueous precursor solution of ammonium meta vanadate (AMV) with two different pH values. X-ray diffraction results showed that the film prepared using aqueous precursor AMV solution (solution A; pH 7) is amorphous in nature and the film prepared by adding HNO{sub 3} in the AMV aqua solution A (solution B; pH 3) is polycrystalline in nature. Vanadium oxide film prepared from the precursor solution B is in the mixed phases of V{sub 2}O{sub 5} and V{sub 4}O{sub 7}. Crystallinity is improved for the film prepared using solution B when compared to film prepared from solution A. Crystallite size, strain and dislocation density calculated for the film prepared from solution B is respectively 72.1 nm, 0.4554 × 10{sup −3} lin.{sup −2}m{sup −4} and 1.7263 × 10{sup 14} lin.m{sup −2}. Morphology study revealed that the size of the flakes formed on the surface of the films is influenced by the pH of the precursor solution. Average Visible Transmittance and maximum transmittance of the deposited films exceed 70% and the direct optical band gap value calculated for the films deposited from A and B solution is 1.91 eV and 2.08 eV respectively.

  15. Raman and XPS characterization of vanadium oxide thin films with temperature

    Science.gov (United States)

    Ureña-Begara, Ferran; Crunteanu, Aurelian; Raskin, Jean-Pierre

    2017-05-01

    The oxidation mechanisms and the numerous phase transitions undergone by VO2 thin films deposited on SiO2/Si and Al2O3 substrates when heated from room temperature (R.T.) up to 550 °C in air are investigated by Raman and X-ray photoelectron spectroscopy. The results show that the films undergo several intermediate phase transitions between the initial VO2 monoclinic phase at R.T. and the final V2O5 phase at 550 °C. The information about these intermediate phase transitions is scarce and their identification is important since they are often found during the synthesis of vanadium dioxide films. Significant changes in the film conductivity have also been observed to occur associated to the phase transitions. In this work, current and resistance measurements performed on the surface of the films are implemented in parallel with the Raman measurements to correlate the different phases with the conductivity of the films. A model to explain the oxidation mechanisms and phenomena occurring during the oxidation of the films is proposed. Peak frequencies, full-width half-maxima, binding energies and oxidation states from the Raman and X-ray photoelectron spectroscopy experiments are reported and analyzed for all the phases encountered in VO2 films prepared on SiO2/Si and Al2O3 substrates.

  16. Switching adhesion forces by crossing the metal–insulator transition in Magnéli-type vanadium oxide crystals

    Directory of Open Access Journals (Sweden)

    Bert Stegemann

    2011-01-01

    Full Text Available Magnéli-type vanadium oxides form the homologous series VnO2n-1 and exhibit a temperature-induced, reversible metal–insulator first order phase transition (MIT. We studied the change of the adhesion force across the transition temperature between the cleavage planes of various vanadium oxide Magnéli phases (n = 3 … 7 and spherical titanium atomic force microscope (AFM tips by systematic force–distance measurements with a variable-temperature AFM under ultrahigh vacuum conditions (UHV. The results show, for all investigated samples, that crossing the transition temperatures leads to a distinct change of the adhesion force. Low adhesion corresponds consistently to the metallic state. Accordingly, the ability to modify the electronic structure of the vanadium Magnéli phases while maintaining composition, stoichiometry and crystallographic integrity, allows for relating frictional and electronic material properties at the nano scale. This behavior makes the vanadium Magnéli phases interesting candidates for technology, e.g., as intelligent devices or coatings where switching of adhesion or friction is desired.

  17. Vanadium oxide decorated carbon nanotubes as a promising support of Pt nanoparticles for methanol electro-oxidation reaction.

    Science.gov (United States)

    Nouralishahi, Amideddin; Khodadadi, Abbas Ali; Rashidi, Ali Morad; Mortazavi, Yadollah

    2013-03-01

    VO(x)-MWCNTs nanocomposite was prepared via deposition-precipitation method followed by microwave treatment. Platinum nanoparticles were dispersed via polyol process over the nanocomposite support, and thus, prepared electro-catalyst was employed in methanol electro-oxidation reaction. The electro-catalysts were characterized by means of TGA, XRD, EDS, FESEM, TEM, and H(2)-TPR analysis. The electro-catalytic activity and stability of the electrodes toward methanol oxidation reaction in acidic medium were studied by using cyclic voltammetry (CV), CO-stripping, and electrochemical impedance spectroscopy (EIS) techniques. Compared to the Pt/MWCNTs, the Pt/VO(x)-MWCNTs electro-catalyst not only exhibits high electro-catalytic activity, but also shows very good stability during methanol electro-oxidation reaction. In addition, the presence of VO(x) in the composite support dramatically increases the electrochemical active surface area of platinum nanoparticles. The results of electrochemical impedance spectroscopy reveal that formation kinetics of adsorbed hydroxyl group on surface of the electro-catalysts is improved upon vanadium oxide addition to the support. This phenomenon is very helpful to facilitate oxidative removal of adsorbed CO group through bifunctional mechanism on Pt/VO(x)-MWCNTs. Copyright © 2012 Elsevier Inc. All rights reserved.

  18. Experimental investigation of new low-dimensional spin systems in vanadium oxides

    International Nuclear Information System (INIS)

    Kaul, E.E.

    2005-01-01

    In this dissertation we reported our experimental investigation of the magnetic properties of nine low-dimensional vanadium compounds. Two of these materials are completely new (Pb 2 V 5 O 12 and Pb 2 VO(PO 4 ) 2 ) and were found during our search for new low-dimensional vanadium oxides. Among the other seven vanadium compounds studied, three were physically investigated for the first time (Sr 2 VO(PO 4 ) 2 , BaZnVO(PO 4 ) 2 and SrZnVO(PO 4 ) 2 ). Two had hitherto only preliminary, and wrongly interpreted, susceptibility measurements reported in the literature (Sr 2 V 3 O 9 and Ba 2 V 3 O 9 ) while the remaining two (Li 2 VOSiO 4 and Li 2 VOGeO 4 ) were previously investigated in some detail but the interpretation of the data was controversial. We investigated the magnetic properties of these materials by means of magnetic susceptibility and specific heat (C p (T)) measurements (as well as single crystal ESR measurements in the case of Sr 2 V 3 O 9 ). We synthesized the samples necessary for our physical studies. That required a search of the optimal synthesis conditions for obtaining pure, high quality, polycrystalline samples. Single crystals of Sr 2 V 3 O 9 and Pb 2 VO(PO 4 ) 2 were also successfully grown. Pb 2 VO(PO 4 ) 2 , BaZnVO(PO 4 ) 2 , SrZnVO(PO 4 ) 2 , Li 2 VOSiO 4 and Li 2 VOGeO 4 were found to be experimental examples of frustrated square-lattice systems which are described by theJ 1 -J 2 model. We found that Li 2 VOSiO 4 and Li 2 VOGeO 4 posses a weakly frustrated antiferromagnetic square lattice while Pb 2 VO(PO 4 ) 2 , BaZnVO(PO 4 ) 2 and SrZnVO(PO 4 ) 2 form a more strongly frustrated ferromagnetic square lattice. Pb 2 V 5 O 12 is structurally and compositionally related to the two dimensional A 2+ V 4+ n O 2n+1 vanadates. Its structure consists of layers formed by edge- and corner-shared square VO 5 pyramids. The basic structural units are plaquettes consisting of six corner-shared pyramids pointing in the same direction, which form a spin

  19. Visible light photooxidative performance of a high-nuclearity molecular bismuth vanadium oxide cluster

    Directory of Open Access Journals (Sweden)

    Johannes Tucher

    2014-05-01

    Full Text Available The visible light photooxidative performance of a new high-nuclearity molecular bismuth vanadium oxide cluster, H3[{Bi(dmso3}4V13O40], is reported. Photocatalytic activity studies show faster reaction kinetics under anaerobic conditions, suggesting an oxygen-dependent quenching of the photoexcited cluster species. Further mechanistic analysis shows that the reaction proceeds via the intermediate formation of hydroxyl radicals which act as oxidant. Trapping experiments using ethanol as a hydroxyl radical scavenger show significantly decreased photocatalytic substrate oxidation in the presence of EtOH. Photocatalytic performance analyses using monochromatic visible light irradiation show that the quantum efficiency Φ for indigo photooxidation is strongly dependent on the irradiation wavelength, with higher quantum efficiencies being observed at shorter wavelengths (Φ395nm ca. 15%. Recycling tests show that the compound can be employed as homogeneous photooxidation catalyst multiple times without loss of catalytic activity. High turnover numbers (TON ca. 1200 and turnover frequencies up to TOF ca. 3.44 min−1 are observed, illustrating the practical applicability of the cluster species.

  20. Vanadium sulfides interwoven nanoflowers based on in-situ sulfurization of vanadium oxides octahedron on nickel foam for efficient hydrogen evolution

    Science.gov (United States)

    Rao, Yi; Zhang, Li-Ming; Shang, Xiao; Dong, Bin; Liu, Yan-Ru; Lu, Shan-Shan; Chi, Jing-Qi; Chai, Yong-Ming; Liu, Chen-Guang

    2017-11-01

    Novel vanadium sulfides interwoven nanoflowers supported on nickel foam (VO-S/NF) has been synthesized through a facile two-step access. Firstly, octahedron-structured vanadium oxides as precursor were anchored on the surface of NF (VO/NF) by a hydrothermal process. Secondly, in-situ sulfurization in H2S gas has been applied to prepare VO-S/NF. XRD shows that VO-S/NF sample is composed of mixture phases including VS and Ni3S2, implying the interface effect between VS and Ni3S2. SEM images demonstrate that octahedron-structured VO from VO/NF changed to VO-S interwoven nanoflowers on VO-S/NF, which are composed of vertical interwoven nanosheets. It can enlarge surface area to expose abundant active sites and facilitate mass and charge transportation. The electrochemical measurements display the enhanced HER activity of VO-S/NF requiring an overpotential of 165 mV to deliver 10 mA cm-2, which may be ascribed to the novel structure of VS interwoven nanosheets and the synergistic effect between VS and Ni3S2. Furthermore, VO-S/NF remains high HER activity for at least 10 h with excellent structural stability confirmed by post-HER characterization such as XRD, SEM and XPS. Therefore, it may provide a new way to design multiple transition metal sulfides-based electrocatalysts with unique nanostructure as well as interface effect for HER in alkaline.

  1. Molecular manipulation of solid state structure: influences of organic components on vanadium oxide architectures

    Science.gov (United States)

    Hagrman, Pamela J.; Finn, Robert C.; Zubieta, Jon

    2001-11-01

    /organic composites. In the past decade, this general strategy has been exploited in the evolution of a family of vanadium oxides incorporating structure-directing organic or secondary-metal organic subunits, which are the topic of this review. The synthetic approach to novel vanadium oxide solids occupies the interface between materials science and coordination chemistry. The emerging theme focuses on the association of an organic component, acting as a ligand, tether, or structure directing moiety, with the inorganic framework of the solid to provide unique composites. While some organic components may limit the size of inorganic cluster subunits of a solid by passivating the surface of an aggregate through capping, such ligands may also serve to link inorganic subunits into complex networks. In other cases, the organic subunit, rather than participating as a covalently bound unit of the framework, acts in a structure directing role, producing amphiphilic materials whose structures are determined by hydrophobic-hydrophilic interactions. This latter feature is reminiscent of the factors influencing biomineralization, a field which may prove relevant to the development of new strategies for the controlled synthesis of organized inorganic and organic/inorganic composite materials. These various approaches to the "design" of inorganic solids are discussed and assessed in terms of the new structural types recently observed in the vanadium oxide chemistry.

  2. The electronic structure and metal-insulator transitions in vanadium oxides

    International Nuclear Information System (INIS)

    Mossanek, Rodrigo Jose Ochekoski

    2010-01-01

    The electronic structure and metal-insulator transitions in vanadium oxides (SrVO 3 , CaVO 3 , LaVO 3 and YVO 3 ) are studied here. The purpose is to show a new interpretation to the spectra which is coherent with the changes across the metal-insulator transition. The main experimental techniques are the X-ray photoemission (PES) and X-ray absorption (XAS) spectroscopies. The spectra are interpreted with cluster model, band structure and atomic multiplet calculations. The presence of charge-transfer satellites in the core-level PES spectra showed that these vanadium oxides cannot be classified in the Mott-Hubbard regime. Further, the valence band and core-level spectra presented a similar behavior across the metal insulator transition. In fact, the structures in the spectra and their changes are determined by the different screening channels present in the metallic or insulating phases. The calculated spectral weight showed that the coherent fluctuations dominate the spectra at the Fermi level and give the metallic character to the SrVO 3 and CaVO 3 compounds. The vanishing of this charge fluctuation and the replacement by the Mott-Hubbard screening in the LaVO 3 and YVO 3 systems is ultimately responsible for the opening of a band gap and the insulating character. Further, the correlation effects are, indeed, important to the occupied electronic structure (coherent and incoherent peaks). On the other hand, the unoccupied electronic structure is dominated by exchange and crystal field effects (t2g and eg sub-bands of majority and minority spins). The optical conductivity spectrum was obtained by convoluting the removal and addition states. It showed that the oxygen states, as well as the crystal field and exchange effects are necessary to correctly compare and interpret the experimental results. Further, a correlation at the charge-transfer region of the core-level and valence band optical spectra was observed, which could be extended to other transition metal

  3. Elucidation of the molecular structure of hydrated vanadium oxide species by X-ray absorption spectroscopy: correlation between the V...V coordination number and distance and the point of zero charge of the support oxide.

    Science.gov (United States)

    Keller, Daphne E; Koningsberger, Diek C; Weckhuysen, Bert M

    2006-11-07

    The effect of the point of zero charge (PZC) of the support oxide (Al(2)O(3), Nb(2)O(5), SiO(2) and ZrO(2)) on the molecular structure of hydrated vanadium oxide species has been investigated with EXAFS spectroscopy for low-loaded vanadium oxide catalysts. It was found that the degree of clustering (i.e., the V[dot dot dot]V coordination number) and the V...V distance increase with decreasing PZC of the support oxide; i.e., Al(2)O(3) (8.7) vanadium oxide exhibited a clear alteration in the position of the oxygen atoms surrounding the central vanadium atom and the number of oxygen atoms around vanadium increased to five. In contrast, only minor changes in the molecular structure were detected for the alumina-, niobia- and zirconia-supported vanadium oxide catalysts. Based on a detailed analysis of the EXAFS data a semi-quantitative distribution of vanadium oxide species present on the surface of the different support oxides can be obtained, which is in good agreement with earlier characterization studies primarily making use of Raman spectroscopy.

  4. Tungsten-doped vanadium oxides prepared by direct liquid injection MOCVD

    Energy Technology Data Exchange (ETDEWEB)

    Vernardou, D.; Pemble, M.E.; Sheel, D.W. [Institute for Materials Research, University of Salford, Cockroft Building, Salford, Manchester (United Kingdom)

    2007-04-15

    This paper examines the effect of doping on vanadium(IV) oxide (VO{sub 2} (M)) coatings on glass, using atmospheric-pressure, direct liquid injection metal-organic (DLI-MO)CVD, which potentially may find application as part of smart glazing units. It is found that tungsten-doped VO{sub 2} (M) deposited on commercial SiO{sub 2}-precoated glass using a 0.1 M solution of vanadyl(IV) acetylacetonate (VO(acac){sub 2}) and tungsten (VI) ethoxide (W(OC{sub 2}H{sub 5}){sub 5}) in methanol shows a reduction in thermochromic transition temperature (T{sub c}) from 60 C in VO{sub 2} (M) to 35 C in V{sub 0.98}W{sub 0.02}O{sub 2}. This finding is discussed in terms of various atomic percentages of tungsten and oxygen flow rates. The crystallinity, composition, morphology, optical properties, uniformity, and oxidation phase of the films are evaluated by X-ray diffraction (XRD), Rutherford backscattering spectroscopy (RBS), scanning electron microscopy (SEM), IR reflectance-transmittance, and Raman spectroscopy, respectively. The relationship between dopant concentration and T{sub c} in the most applicable range for solar window coatings is refined by formation of a single-phase film and precise determination of these parameters. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  5. Amorphous Cobalt Vanadium Oxide as a Highly Active Electrocatalyst for Oxygen Evolution.

    Science.gov (United States)

    Liardet, Laurent; Hu, Xile

    2018-01-05

    The water-splitting reaction provides a promising mechanism to store renewable energies in the form of hydrogen fuel. The oxidation half-reaction, the oxygen evolution reaction (OER), is a complex four-electron process that constitutes an efficiency bottleneck in water splitting. Here we report a highly active OER catalyst, cobalt vanadium oxide. The catalyst is designed on the basis of a volcano plot of metal-OH bond strength and activity. The catalyst can be synthesized by a facile hydrothermal route. The most active pure-phase material ( a- CoVO x ) is X-ray amorphous and provides a 10 mA cm -2 current density at an overpotential of 347 mV in 1 M KOH electrolyte when immobilized on a flat substrate. The synthetic method can also be applied to coat a high-surface-area substrate such as nickel foam. On this three-dimensional substrate, the a- CoVO x catalyst is highly active, reaching 10 mA cm -2 at 254 mV overpotential, with a Tafel slope of only 35 mV dec -1 . This work demonstrates a- CoVO x as a promising electrocatalyst for oxygen evolution and validates M-OH bond strength as a practical descriptor in OER catalysis.

  6. Highly Efficient Gas-Phase Oxidation of Renewable Furfural to Maleic Anhydride over Plate Vanadium Phosphorus Oxide Catalyst.

    Science.gov (United States)

    Li, Xiukai; Ko, Jogie; Zhang, Yugen

    2018-02-09

    Maleic anhydride (MAnh) and its acids are critical intermediates in chemical industry. The synthesis of maleic anhydride from renewable furfural is one of the most sought after processes in the field of sustainable chemistry. In this study, a plate vanadium phosphorus oxide (VPO) catalyst synthesized by a hydrothermal method with glucose as a green reducing agent catalyzes furfural oxidation to MAnh in the gas phase. The plate catalyst-denoted as VPO HT -has a preferentially exposed (200) crystal plane and exhibited dramatically enhanced activity, selectivity and stability as compared to conventional VPO catalysts and other state-of-the-art catalytic systems. At 360 °C reaction temperature with air as an oxidant, about 90 % yield of MAnh was obtained at 10 vol % of furfural in the feed, a furfural concentration value that is much higher than those (catalyst showed good long-term stability and there was no decrease in activity or selectivity for MAnh during the time-on-stream of 25 h. The high efficiency and catalyst stability indicate the great potential of this system for the synthesis of maleic anhydride from renewable furfural. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Experimental and theoretical study of the reactions between neutral vanadium oxide clusters and ethane, ethylene, and acetylene.

    Science.gov (United States)

    Dong, Feng; Heinbuch, Scott; Xie, Yan; Rocca, Jorge J; Bernstein, Elliot R; Wang, Zhe-Chen; Deng, Ke; He, Sheng-Gui

    2008-02-13

    Reactions of neutral vanadium oxide clusters with small hydrocarbons, namely C2H6, C2H4, and C2H2, are investigated by experiment and density functional theory (DFT) calculations. Single photon ionization through extreme ultraviolet (EUV, 46.9 nm, 26.5 eV) and vacuum ultraviolet (VUV, 118 nm, 10.5 eV) lasers is used to detect neutral cluster distributions and reaction products. The most stable vanadium oxide clusters VO2, V2O5, V3O7, V4O10, etc. tend to associate with C2H4 generating products V(m)O(n)C2H4. Oxygen-rich clusters VO3(V2O5)(n=0,1,2...), (e.g., VO3, V3O8, and V5O13) react with C2H4 molecules to cause a cleavage of the C=C bond of C2H4 to produce (V2O5)(n)VO2CH2 clusters. For the reactions of vanadium oxide clusters (V(m)O(n)) with C2H2 molecules, V(m)O(n)C2H2 are assigned as the major products of the association reactions. Additionally, a dehydration reaction for VO3 + C2H2 to produce VO2C2 is also identified. C2H6 molecules are quite stable toward reaction with neutral vanadium oxide clusters. Density functional theory calculations are employed to investigate association reactions for V2O5 + C2H(x). The observed relative reactivity of C2 hydrocarbons toward neutral vanadium oxide clusters is well interpreted by using the DFT calculated binding energies. DFT calculations of the pathways for VO3+C2H4 and VO3+C2H2 reaction systems indicate that the reactions VO3+C2H4 --> VO2CH2 + H2CO and VO3+C2H2 --> VO2C2 + H2O are thermodynamically favorable and overall barrierless at room temperature, in good agreement with the experimental observations.

  8. Silver-decorated orthorhombic nanotubes of lithium vanadium oxide: an impeder of bacterial growth and biofilm.

    Science.gov (United States)

    Diggikar, Rahul S; Patil, Rajendra H; Kale, Sheetal B; Thombre, Dipalee K; Gade, Wasudeo N; Kulkarni, Milind V; Kale, Bharat B

    2013-09-01

    Reoccurrence of infectious diseases and ability of pathogens to resist antibacterial action has raised enormous challenges which may possibly be confronted by nanotechnology routes. In the present study, uniformly embedded silver nanoparticles in orthorhombic nanotubes of lithium vanadium oxide (LiV2O5/Ag) were explored as an impeder of bacterial growth and biofilm. The LiV2O5/Ag nanocomposites have impeded growth of Gram-positive Bacillus subtilis NCIM 2063 and Gram-negative Escherichia coli NCIM 2931 at 60 to 120 μg/mL. It also impeded the biofilm in Pseudomonas aeruginosa NCIM 2948 at 12.5 to 25 μg/mL. Impedance in the growth and biofilm occurs primarily by direct action of the nanocomposites on the cell surfaces of test organisms as revealed by surface perturbation in scanning electron microscopy. As the metabolic growth and biofilm formation phenomena of pathogens play a central role in progression of pathogenesis, LiV2O5/Ag nanocomposite-based approach is likely to curb the menace of reoccurrence of infectious diseases. Thus, LiV2O5/Ag nanocomposites can be viewed as a promising candidate in biofabrication of biomedical materials.

  9. Electrochemical performance of polypyrrole/silver vanadium oxide composite cathodes in lithium primary batteries

    Science.gov (United States)

    Anguchamy, Yogesh K.; Lee, Jong-Won; Popov, Branko N.

    Polypyrrole (PPy)/silver vanadium oxide (SVO) composite cathode materials were synthesized by polymerizing pyrrole onto the surface of pure SVO particles. Electrochemical characterization was carried out by performing galvanostatic discharge, pulse discharge and ac-impedance experiments. The composite electrode exhibited better performance than pristine SVO in all the experiments. The composite electrodes yielded a higher discharge capacity and a better pulse discharge capability when compared to the pristine SVO electrode. The pulse discharge and ac-impedance studies indicated that PPy forms an effective conductive network on the SVO surface and thereby reduces the particle-to-particle contact resistance and facilitates the interfacial charge transfer kinetics. To determine the thermal stability of the composite cathode, galvanostatic discharge and ac-impedance experiments were performed at different temperatures. The capacity increased with temperature due to enhanced charge transfer kinetics and low mass transfer limitations. The peak capacity was obtained at 60 °C, after which the performance degraded with any further increase in temperature.

  10. Electrochemical performance of polypyrrole/silver vanadium oxide composite cathodes in lithium primary batteries

    Energy Technology Data Exchange (ETDEWEB)

    Anguchamy, Yogesh K.; Lee, Jong-Won; Popov, Branko N. [Center for Electrochemical Engineering, Department of Chemical Engineering, University of South Carolina, Columbia, SC 29208 (United States)

    2008-09-15

    Polypyrrole (PPy)/silver vanadium oxide (SVO) composite cathode materials were synthesized by polymerizing pyrrole onto the surface of pure SVO particles. Electrochemical characterization was carried out by performing galvanostatic discharge, pulse discharge and ac-impedance experiments. The composite electrode exhibited better performance than pristine SVO in all the experiments. The composite electrodes yielded a higher discharge capacity and a better pulse discharge capability when compared to the pristine SVO electrode. The pulse discharge and ac-impedance studies indicated that PPy forms an effective conductive network on the SVO surface and thereby reduces the particle-to-particle contact resistance and facilitates the interfacial charge transfer kinetics. To determine the thermal stability of the composite cathode, galvanostatic discharge and ac-impedance experiments were performed at different temperatures. The capacity increased with temperature due to enhanced charge transfer kinetics and low mass transfer limitations. The peak capacity was obtained at 60 C, after which the performance degraded with any further increase in temperature. (author)

  11. Superior Pseudocapacitive Lithium-Ion Storage in Porous Vanadium Oxides@C Heterostructure Composite.

    Science.gov (United States)

    Wang, Hong-En; Zhao, Xu; Yin, Kaili; Li, Yu; Chen, Lihua; Yang, Xiaoyu; Zhang, Wenjun; Su, Bao-Lian; Cao, Guozhong

    2017-12-20

    Vanadium oxides are promising anode materials for lithium-ion batteries (LIBs) due to their high capacity, good safety, and low cost. However, their practical application has been deferred by the poor rate capability and cycling stability. In this work, we report the designed synthesis of porous V 2 O 3 /VO 2 @carbon heterostructure electrode for high-performance LIBs. The synergic effects of porous nanostructures, phase hybridization with self-building electric field at heterointerface, and conductive carbon implantation effectively enhance the electronic/ionic conduction and buffer the volume variation in the composite material. Electrochemical tests reveal that the composite electrode exhibits high Li-ion storage capacities of 503 and 453 mAh/g at 100 and 500 mA/g, as well as good cycling stability with a retained capacity of 569 mAh/g over 105 cycles at 100 mA/g. In-depth kinetics analysis discloses that pseudocapacitive Li-ion storage process dominates in the composite electrode, which is probably enabled by efficient coupling of the heterostructure components. The strategy of in situ carbon implantation and phase hybridization presented herein may be extended to other electrode materials for rechargeable batteries with superior electrochemical properties.

  12. Influence of a Revolutionary Substrate on Hysteresis Effect in Reactive Sputtering Deposition of Vanadium Oxide

    Directory of Open Access Journals (Sweden)

    He YU

    2016-05-01

    Full Text Available Reactive sputter processes frequently exhibit stability problems. The cause of this is that these processes normally exhibit hysteresis effects in the processing curves. Eliminating or decreasing the hysteresis would significantly simplify the use of reactive sputtering processes. In this work, we present reactive sputtering deposition modeling of vanadium oxide with a revolutionary substrate, aiming to study the influence of it on hysteresis effect. Based on this modeling, the fractions of V, V2O3, VO2, V2O5 at the target surface and target voltage have been investigated as a function of reactive gas flow during the reactive sputtering. The substrate area was replaced by a new parameter of effective area of substrate As which was calculated as a sum of contributions from the substrate area at each cell of time. From the modeling results, it is suggested that the effective area of the substrate was reduced for reactive sputtering with revolutionary substrate, thus the hysteresis width would be decreased. This has been experimentally verified by reactive sputtering deposition of VOx. Besides, the fundamental explanation to this behavior as well as the experimental verification is presented.DOI: http://dx.doi.org/10.5755/j01.ms.22.1.7569

  13. Characterization of a low-cost, commercially available, vanadium oxide microbolometer array for spectroscopic imaging

    Science.gov (United States)

    Benirschke, David; Howard, Scott

    2017-04-01

    Many long-wave infrared spectroscopic imaging applications are limited by the portability and cost of detector arrays. We present a characterization of a newly available, low-cost, uncooled vanadium oxide microbolometer array, the Seek Compact, in accordance with common infrared detector specifications: noise-equivalent differential temperature (NEDT), optical responsivity spectra, and Allan variance. The Compact's imaging array consists of 156×206 pixels with a 12-μm pixel pitch, 93% of the pixels yield useful temperature readings. Characterization results show optical response between λ=7.4 and 12 μm with an NEDT of 148 mK (at ≈7 fps). Comparing these results to a research-grade camera, the Seek Compact exhibits a 4× and 48× reduction in weight (2.0/0.5 lbs) and cost (12,000/250) but takes 93× longer to achieve the same NEDT (1.55 s/16.6 ms for 45 mK). Additionally, a proof-of-concept spectral imaging experiment of SiN thin films is conducted. Leveraging this price reduction and spectroscopic imaging capability, the Seek Compact has potential in enabling field-deployable and distributed active midinfrared spectroscopic imaging, where cost and portability are the dominate inhibitors and high frame rates are not required.

  14. Nanostructured bilayered vanadium oxide electrodes for rechargeable sodium-ion batteries.

    Science.gov (United States)

    Tepavcevic, Sanja; Xiong, Hui; Stamenkovic, Vojislav R; Zuo, Xiaobing; Balasubramanian, Mahalingam; Prakapenka, Vitali B; Johnson, Christopher S; Rajh, Tijana

    2012-01-24

    Tailoring nanoarchitecture of materials offers unprecedented opportunities in utilization of their functional properties. Nanostructures of vanadium oxide, synthesized by electrochemical deposition, are studied as a cathode material for rechargeable Na-ion batteries. Ex situ and in situ synchrotron characterizations revealed the presence of an electrochemically responsive bilayered structure with adjustable intralayer spacing that accommodates intercalation of Na(+) ions. Sodium intake induces organization of overall structure with appearance of both long- and short-range order, while deintercalation is accompanied with the loss of long-range order, whereas short-range order is preserved. Nanostructured electrodes achieve theoretical reversible capacity for Na(2)V(2)O(5) stochiometry of 250 mAh/g. The stability evaluation during charge-discharge cycles at room temperature revealed an efficient 3 V cathode material with superb performance: energy density of ~760 Wh/kg and power density of 1200 W/kg. These results demonstrate feasibility of development of the ambient temperature Na-ion rechargeable batteries by employment of electrodes with tailored nanoarchitectures. © 2011 American Chemical Society

  15. The microstructures and electrical properties of Y-doped amorphous vanadium oxide thin films

    Science.gov (United States)

    Gu, Deen; Zhou, Xin; Guo, Rui; Wang, Zhihui; Jiang, Yadong

    2017-03-01

    One of promising approaches for further improving the sensitivity of microbolometer arrays with greatly-reduced pixel size is using the thermal-sensitive materials with higher performance. In this paper, Y-doped vanadium oxide (VOx) thin films prepared by a reactively sputtering process exhibit enhanced performance for the microbolometer application compared with frequently-applied VOx thin films. Both undoped and Y-doped VOx thin films are amorphous due to the relatively low deposition temperature. Y-doped VOx thin films exhibit smoother surface morphology than VOx due to the restrained expansion of particles during depositions. Y-doping increases the temperature coefficient of resistivity by over 20% for the doping level of 1.30 at%. The change rate of resistivity, after aging for 72 h, of thin films was reduced from about 15% for undoped VOx to 2% due to the introduction of Y. Moreover, Y-doped VOx thin films have a low 1/f noise level as VOx ones. Y-doping provides an attractive approach for preparing VOx thermal-sensitive materials with enhanced performance for microbolometers.

  16. The mechanism of cysteine detection in biological media by means of vanadium oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Bezerra, A. G. [Universidade Tecnologica Federal do Parana, Departamento Academico de Fisica (Brazil); Barison, A. [Universidade Federal do Parana, Departamento de Quimica (Brazil); Oliveira, V. S. [Universidade Federal do Parana, Departamento de Fisica (Brazil); Foti, L.; Krieger, M. A. [Fundacao Oswaldo Cruz, Instituto de Biologia Molecular do Parana (Brazil); Dhalia, R.; Viana, I. F. T. [Fundacao Oswaldo Cruz, Centro de Pesquisas Aggeu Magalhaes (Brazil); Schreiner, W. H., E-mail: wido@fisica.ufpr.br [Universidade Federal do Parana, Departamento de Fisica (Brazil)

    2012-09-15

    We report on the interaction of vanadate nanoparticles, produced using the laser ablation in liquids synthesis, with cysteine in biological molecules. Cysteine is a very important amino acid present in most proteins, but also because cysteine and the tripeptide glutathione are the main antioxidant molecules in our body system. Detailed UV-Vis absorption spectra and dynamic light scattering measurements were done to investigate the detection of cysteine in large biological molecules. The intervalence band of the optical absorption spectra shows capability for quantitative cysteine sensing in the {mu}M range in biological macromolecules. Tests included cytoplasmic repetitive antigen and flagellar repetitive antigen proteins of the Trypanosoma cruzi protozoa, as well as the capsid p24 proteins from Human Immunodeficiency Virus type 1 and type 2. Detailed NMR measurements for hydrogen, carbon, and vanadium nuclei show that cysteine in contact with the vanadate looses hydrogen of the sulphydryl side chain, while the vanadate is reduced. The subsequent detachment of two deprotonated molecules to form cystine and the slow return to the vanadate complete the oxidation-reduction cycle. Therefore, the vanadate acts as a charge exchanging catalyst on cysteine to form cystine. The NMR results also indicate that the nanoparticles are not formed by the common orthorhombic V{sub 2}O{sub 5} form.

  17. Evaluation of feasibility of tungsten/oxide dispersion strengthened steel bonding with vanadium insert

    International Nuclear Information System (INIS)

    Noto, Hiroyuki; Kimura, Akihiko; Kurishita, Hiroaki; Matsuo, Satoru; Nogami, Shuhei

    2013-01-01

    A diffusion bonding (DB) technique to reduce thermal expansion coefficient mismatch between tungsten (W) and oxide dispersion strengthened ferritic steel (ODS-FS) was developed by applying a vanadium (V) alloy as an insert material. In order to suppress σ phase precipitation at the interface, DB of ODS-FS and V-4Cr-4Ti was carried out by introducing a Ti insert as a diffusion barrier between V-4Cr-4Ti and ODS-FS, and examined feasibility of W/V/Ti/ODS-FS joint for application to fusion reactor components by comparing the three-point bending strength and microstructure between the joints with and without a Ti diffusion barrier layer. It is shown that the fracture strength of the joint without a Ti insert was decreased by 25% after aging at 700°C for 100 h, but that with a Ti insert shows no change after the aging treatment up to 1000 h. The result indicates that the introduction of a Ti insert leads to the prevention of the formation of σ phase during aging and resultant control of the degradation of the bonding strength. (author)

  18. Trimetallic oxide nanocomposites of transition metals titanium and vanadium by sol-gel technique: synthesis, characterization and electronic properties

    Science.gov (United States)

    Kumar, Amit; Mishra, Neeraj Kumar; Sachan, Komal; Ali, Md Asif; Soaham Gupta, Sachchidanand; Singh, Rajeev

    2018-04-01

    Novel titanium and vanadium based trimetallic oxide nanocomposites (TMONCs) have been synthesized using metal salts of titanium-vanadium along with three others metals viz. tin, aluminium and zinc as precursors by the sol-gel method. Aqueous ammonia and hydrazine hydrate were used as the reducing agents. The preparations of nanocomposites were monitored by observing the visual changes during each step of synthesis. The synthesized TMONCs were characterized using UV–vis, SEM, EDX, TEM and DLS. Band gap of the synthesized TMONCs ranges from 3–4.5 eV determined using tauc plot. FTIR study revealed the molecular stretching and bending peaks of corresponding M–O/M–O–M bonds thus confirming their formation. Molecular composition and particle size were determined using EDX and DLS respectively. Molecular shape, size and surface morphology have been examined by SEM and TEM.

  19. Properties of Vanadium-Doped Indium Oxide Deposited at Room Temperature as Transparent Conductor for Inverted Polymer Solar Cells

    Science.gov (United States)

    Choi, Min-Jun; Lim, Keun Yong; Park, Hyun-Woo; Kim, Han-Ki; Hwang, Do Kyung; Lim, Sung-Jin; Shim, Jae Won; Chung, Kwun-Bum

    2017-10-01

    The properties of vanadium-doped indium oxide (IVO) deposited at room temperature as a transparent conductor for inverted polymer solar cells have been investigated as a function of the vanadium doping concentration. IVO film prepared with V doping concentration of 0.03% showed optimal properties for use as a transparent conductor with figure of merit of 4.35 × 10-3 Ohm-1, related to altered band alignment between the Fermi level and conduction-band minimum. In the optimal optoelectrical conditions for the IVO film, performance optimization of PTB7:PC70BM inverted polymer solar cells resulted in maximum power conversion efficiency of 4.7 ± 0.4% under simulated air mass 1.5 global illumination at 100 mW/cm2.

  20. Comparison of distribution and toxicity following repeated oral dosing of different vanadium oxide nanoparticles in mice.

    Science.gov (United States)

    Park, Eun-Jung; Lee, Gwang-Hee; Yoon, Cheolho; Kim, Dong-Wan

    2016-10-01

    Vanadium is an important ultra-trace element derived from fuel product combustion. With the development of nanotechnology, vanadium oxide nanoparticles (VO NPs) have been considered for application in various fields, thus the possibility of release into the environment and human exposure is also increasing. Considering that verification of bioaccumulation and relevant biological responses are essential for safe application of products, in this study, we aimed to identify the physicochemical properties that determine their health effects by comparing the biological effects and tissue distribution of different types of VO NPs in mice. For this, we prepared five types of VO NPs, commercial (C)-VO2 and -V2O5 NPs and synthetic (S)-VO2, -V2O3, and -V2O5 NPs. While the hydrodynamic diameter of the two types of C-VO NPs was irregular and impossible to measure, those of the three types of S-VO NPs was in the range of 125-170nm. The S- and C-V2O5 NPs showed higher dissolution rates compared to other VO NPs. We orally dosed the five types of VO NPs (70 and 210μg/mouse, approximately 2 and 6mg/kg) to mice for 28 days and compared their biodistribution and toxic effects. We found that S-V2O5 and S-V2O3 NPs more accumulated in tissues compared to other three types of VO NPs, and the accumulated level was in order of heart>liver>kidney>spleen. Additionally, tissue levels of redox reaction-related elements and electrolytes (Na(+), K(+), and Ca(2+)) were most clearly altered in the heart of treated mice. Notably, all S- and C-VO NPs decreased the number of WBCs at the higher dose, while total protein and albumin levels were reduced at the higher dose of S-V2O5 and S-V2O3 NPs. Taken together, we conclude that the biodistribution and toxic effects of VO NPs depend on their dissolution rates and size (surface area). Additionally, we suggest that further studies are needed to clarify effects of VO NPs on functions of the heart and the immune system. Copyright © 2016 Elsevier Inc. All

  1. A study on the reaction characteristics of vanadium-impregnated natural manganese oxide in ammonia selective catalytic reduction.

    Science.gov (United States)

    Kim, Sung Su; Lee, Sang Moon; Park, Kwang Hee; Kwon, Dong Wook; Hong, Sung Chang

    2011-05-01

    This study investigated the effect of adding vanadium (V) to natural manganese oxide (NMO) in ammonia (NH3) selective catalytic reduction (SCR). The addition of V to NMO decreased the catalytic activity at low temperatures by blocking the active site. However, the enhancement of catalytic activity was achieved by controlling NH3 oxidation at high temperatures. From the NH3 temperature programmed desorption and oxygen on/off test, it was confirmed that the amount of Lewis acid site and active lattice oxygen of the catalyst affects the catalytic performance at low temperature.

  2. Magnetron sputtered Au-decorated vanadium oxides composite thin films for methane-sensing properties at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Jiran, E-mail: liang_jiran@tju.edu.cn; Liu, Junfeng; Li, Na; Li, Wenjiao

    2016-06-25

    Room temperature methane (CH{sub 4}) gas sensing properties of Au-decorated vanadium oxide (VO{sub x}) nanostructured films have been prepared by dc-magnetron sputtering of V metal, followed by rapid thermal annealing (RTA) in O{sub 2} atmosphere from 470 °C to 500 °C on the sapphire substrate. The structural properties of the Au/VO{sub x} films were measured by X-ray diffraction (XRD) and vanadium oxide phases were found and identified as VOx. The films showed a cracking and porous morphology structure, measured by field emission scanning electron microscope (FESEM). The CH{sub 4}-sensing properties of the sensor based on Au/VO{sub x} composite films were carried out in the temperatures span ranging from room temperature (∼25 °C) to 100 °C. The films sensors achieved their maximum response values toward CH{sub 4} at room temperature (RT) and the optimal concentration at the concentration of 1500 ppm. At RT, the sensor exhibited higher gas response, good repeatability and excellent selectivity characteristics toward CH{sub 4} gas due to its high specific surface area, special structure, and large amounts of oxygen vacancies. Obtained results revealed that the Au/VO{sub x} films sensors showed a broad commercial applications prospect to detect CH{sub 4} in the field of RT. - Highlights: • Au/VO{sub x} films were prepared involving sputtering and rapid thermal annealing. • A mixture of vanadium dioxide and vanadium pentoxide were synthesized. • The Au/VO{sub x} films methane sensor could operate at room temperature (∼25 °C). • The optimal operating concentration was obtained at 1500 ppm toward methane.

  3. Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

    Science.gov (United States)

    Espinosa, Nieves; Dam, Henrik Friis; Tanenbaum, David M.; Andreasen, Jens W.; Jørgensen, Mikkel; Krebs, Frederik C.

    2011-01-01

    The use of hydrated vanadium(V)oxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full roll-to-roll (R2R) processing of all layers. The devices were prepared on flexible polyethyleneterphthalate (PET) and had the structure PET/ITO/ZnO/P3HT:PCBM/V2O5·(H2O)n/Ag. The ITO and silver electrodes were processed and patterned by use of screen printing. The zinc oxide, P3HT:PCBM and vanadium(V)oxide layers were processed by slot-die coating. The hydrated vanadium(V)oxide layer was slot-die coated using an isopropanol solution of vanadyl-triisopropoxide (VTIP). Coating experiments were carried out to establish the critical thickness of the hydrated vanadium(V)oxide layer by varying the concentration of the VTIP precursor over two orders of magnitude. Hydrated vanadium(V)oxide layers were characterized by profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and grazing incidence wide angle X-ray scattering. The power conversion efficiency (PCE) for completed modules was up to 0.18%, in contrast to single cells where efficiencies of 0.4% were achieved. Stability tests under indoor and outdoor conditions were accomplished over three weeks on a solar tracker. PMID:28879984

  4. Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement.

    Science.gov (United States)

    Espinosa, Nieves; Dam, Henrik Friis; Tanenbaum, David M; Andreasen, Jens W; Jørgensen, Mikkel; Krebs, Frederik C

    2011-01-11

    The use of hydrated vanadium(V)oxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full roll-to-roll (R2R) processing of all layers. The devices were prepared on flexible polyethyleneterphthalate (PET) and had the structure PET/ITO/ZnO/P3HT:PCBM/V₂O₅·(H₂O) n /Ag. The ITO and silver electrodes were processed and patterned by use of screen printing. The zinc oxide, P3HT:PCBM and vanadium(V)oxide layers were processed by slot-die coating. The hydrated vanadium(V)oxide layer was slot-die coated using an isopropanol solution of vanadyl-triisopropoxide (VTIP). Coating experiments were carried out to establish the critical thickness of the hydrated vanadium(V)oxide layer by varying the concentration of the VTIP precursor over two orders of magnitude. Hydrated vanadium(V)oxide layers were characterized by profilometry, scanning electron microscopy, energy dispersive X-ray spectroscopy, and grazing incidence wide angle X-ray scattering. The power conversion efficiency (PCE) for completed modules was up to 0.18%, in contrast to single cells where efficiencies of 0.4% were achieved. Stability tests under indoor and outdoor conditions were accomplished over three weeks on a solar tracker.

  5. Investigation of Silica-Supported Vanadium Oxide Catalysts by High-Field 51 V Magic-Angle Spinning NMR

    Energy Technology Data Exchange (ETDEWEB)

    Jaegers, Nicholas R.; Wan, Chuan; Hu, Mary Y.; Vasiliu, Monica; Dixon, David A.; Walter, Eric; Wachs, Israel E.; Wang, Yong; Hu, Jian Zhi

    2017-03-14

    Supported V2O5/SiO2 catalysts were studied using solid state 51V MAS NMR at a sample spinning rate of 36 kHz and at a magnetic field of 19.975 T for a better understanding of the coordination of the vanadium oxide as a function of environmental conditions . Structural transformations of the supported vanadium oxide species between the catalyst in the dehydrated state and hydrated state under an ambient environment were revisited to examine the degree of oligomerization and the effect of water. The experimental results indicate the existence of a single dehydrated surface vanadium oxide species that resonates at -675 ppm and two vanadium oxide species under ambient conditions that resonate at -566 and -610 ppm, respectively. No detectable structural difference was found as a function of vanadium oxide loading on SiO2 (3% V2O5/SiO2 and 8% V2O5/SiO2). Quantum chemistry simulations of the 51V NMR chemical shifts on predicted surface structures were used as an aide in understanding potential surface vanadium oxide species on the silica support. The results suggest the formation of isolated surface VO4 units for the dehydrated catalysts with the possibility of dimer and cyclic trimer presence. The absence of bridging V-O-V vibrations (~200-300 cm-1) in the Raman spectra [Gao et al. J. Phys. Chem. B 1998, 102, 10842-10852], however, indicates that the isolated surface VO4 sites are the dominant dehydrated surface vanadia species on silica. Upon exposure to water, hydrolysis of the bridging V-O-Si bonds is most likely responsible for the decreased electron shielding experienced by vanadium. No indicators for the presence of hydrated decavanadate clusters or hydrated vanadia gels previously proposed in the literature were detected in this study.

  6. Vanadium Oxide Thin Film Formation on Graphene Oxide by Microexplosive Decomposition of Ammonium Peroxovanadate and Its Application as a Sodium Ion Battery Anode.

    Science.gov (United States)

    Mikhaylov, Alexey A; Medvedev, Alexander G; Grishanov, Dmitry A; Sladkevich, Sergey; Gun, Jenny; Prikhodchenko, Petr V; Xu, Zhichuan J; Nagasubramanian, Arun; Srinivasan, Madhavi; Lev, Ovadia

    2018-02-27

    Formation of vanadium oxide nanofilm-coated graphene oxide (GO) is achieved by thermally induced explosive disintegration of a microcrystalline ammonium peroxovanadate-GO composite. GO sheets isolate the microcrystalline grains and capture and contain the microexplosion products, resulting in the deposition of the nanoscale products on the GO. Thermal treatment of the supported nanofilm yields a sequence of nanocrystalline phases of vanadium oxide (V 3 O 7 , VO 2 ) as a function of temperature. This is the first demonstration of microexplosive disintegration of a crystalline peroxo compound to yield a nanocoating. The large number of recently reported peroxide-rich crystalline materials suggests that the process can be a useful general route for nanofilm formation. The V 3 O 7 @GO composite product was tested as a sodium ion battery anode and showed high charge capacity at high rate charge-discharge cycling (150 mAh g -1 at 3000 mA g -1 vs 300 mAh g -1 at 100 mA g -1 ) due to the nanomorphology of the vanadium oxide.

  7. Partial oxidation of n- and i-pentane over promoted vanadium-phosphorus oxide catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Zazhigalov, V.A.; Mikhajluk, B.D.; Komashko, G.A. [AN Ukrainskoj SSR, Kiev (Ukraine). Inst. Fizicheskoj Khimii

    1998-12-31

    It is known, that the cost of raw materials for catalytic oxidation processes is about 60% of the product price. Cheap initial compounds to produce variety of products and to replace olefins and aromatic hydrocarbons are paraffins. That is why catalytic systems which could be possibly rather efficient in selective oxidation of paraffin hydrocarbons are under very close investigation now. One of such processes in n-pentane oxidation. The obtained results on n-pentane oxidation over VPO catalysts were quite encouraging in respect of possible reach high selectivity and yield of phthalic anhydride. However, in our work it was shown that the main product of n-pentane oxidation in the presence of VPO catalytic system as well as VPMeO was maleic anhydride. Some later our results were confirmed in, where to grow the selectivity towards phthalic anhydride the Co-additive was introduced. On the basis of the proposal made before on the mechanism of paraffins conversion over the vanadyl pyrophosphate surface with their activation at the first and fourth carbon atoms, we assumed possible methylmaleic (citraconic) anhydride forming at n- and i-pentane oxidation. This assumption has been recently supported by both our and other researchers` experimental results. In it was also hypothized possible mechanistic features for phthalic anhydride forming from n-pentane. The present work deals with the results of n- and i-pentane oxidation over VPO catalysts promoted with Bi, Cs, Te, Zr. (orig.)

  8. Amorphous and Crystalline Vanadium Oxides as High-Energy and High-Power Cathodes for Three-Dimensional Thin-Film Lithium Ion Batteries.

    Science.gov (United States)

    Mattelaer, Felix; Geryl, Kobe; Rampelberg, Geert; Dendooven, Jolien; Detavernier, Christophe

    2017-04-19

    Flexible wearable electronics and on-chip energy storage for wireless sensors drive rechargeable batteries toward thin-film lithium ion batteries. To enable more charge storage on a given surface, higher energy density materials are required, while faster energy storage and release can be obtained by going to thinner films. Vanadium oxides have been examined as cathodes in classical and thin-film lithium ion batteries for decades, but amorphous vanadium oxide thin films have been mostly discarded. Here, we investigate the use of atomic layer deposition, which enables electrode deposition on complex three-dimensional (3D) battery architectures, to obtain both amorphous and crystalline VO 2 and V 2 O 5 , and we evaluate their thin-film cathode performance. Very high volumetric capacities are found, alongside excellent kinetics and good cycling stability. Better kinetics and higher volumetric capacities were observed for the amorphous vanadium oxides compared to their crystalline counterparts. The conformal deposition of these vanadium oxides on silicon micropillar structures is demonstrated. This study shows the promising potential of these atomic layer deposited vanadium oxides as cathodes for 3D all-solid-state thin-film lithium ion batteries.

  9. Determination of vanadium(5) and 8-hydroxyquinoline by oxidation of aniline with bromate ions in highly acidic solutions using spectrometry and thermal lensing

    International Nuclear Information System (INIS)

    Proskurin, M.A.; Shelepchikov, A.A.; Kuznetsov, V.V.; Sviridova, O.V.; Osipova, N.V.

    2000-01-01

    When studying the rate of aniline oxidation by bromate-ions depending on the medium pH, it was revealed that pH reduction resulted in the change in characteristics of the reaction products absorption band. Physicochemical characteristics of the reaction considered occurring in highly acid medium (pH 2.4) were determined: pseudoorders in terms of oxidizing and reducing agents and effective rate constants. It is shown that aniline oxidation by bromate-ions in a highly acid medium permits reducing detection limits of vanadium(5) and 8-hydroxyquinoline (as activator of vanadium catalytic activity) both for spectrophotometric and thermal lensing detection [ru

  10. Structure and reactivity of titania-supported oxides. Part 1: vanadium oxide on titania in the sub- and super-monolayer regions

    NARCIS (Netherlands)

    Bond, Geoffrey C.; Perez Zurita, Josefina; Flamerz, Saad; Gellings, P.J.; Bosch, H.; van Ommen, J.G.; Kip, Bert J.

    1986-01-01

    Vanadium oxide has been deposited on TiO2 (washed anatase, 10 m2g−1; Degussa P-25, 55 ±3 m2g−1; Eurotitania, 46 m2g−1) by aqueous impregnation of (NH4)2[VO(C2O4)2] and by reaction with VOCl3, VO(OR)3 (R=iBu) and VO(acac)2 in organic solvents. Single applications of the last tree reagents form not

  11. General synthesis of vanadium-based mixed metal oxides hollow nanofibers for high performance lithium-ion batteries

    Science.gov (United States)

    Xiang, Juan; Yu, Xin-Yao; Paik, Ungyu

    2016-10-01

    Hollow nanostructured mixed metal oxides have recently been intensively investigated as electrode materials for energy storage and conversion due to their remarkable electrochemical properties. Although great efforts have been made, the synthesis of hollow nanostructured vanadium-based mixed metal oxides especially those with one dimensional structure is rarely reported. Vanadium-based mixed metal oxides are promising electrode materials for lithium-ion batteries with high capacity and good rate capability. Here, we develop a facile and general method for the synthesis of one dimensional MxV2O8 (M = Co, Ni, Fe) tubular structure through a simple single-spinneret electrospinning technique followed by a calcination process. As a demonstration, Co3V2O8 hollow nanofibers are evaluated as anode materials for lithium-ion batteries. As expected, benefiting from their unique one dimensional tubular structure, the as-synthesized Co3V2O8 exhibits excellent electrochemical properties for lithium storage. To be specific, it can deliver a high specific capacity of 900 mAh g-1 at 5 A g-1, and long cycling stability up to 2000 cycles. The present work makes a significant contribution to the design and synthesis of mixed metal oxides with one dimensional tubular structure, as well as their potential applications in electrochemical energy storage.

  12. Incorporation of Vanadium Oxide in Silica Nanofiber Mats via Electrospinning and Sol-Gel Synthesis

    Directory of Open Access Journals (Sweden)

    Jeanne E. Panels

    2006-01-01

    Full Text Available Submicron scale vanadia/silica hybrid nanofiber mats have been produced by electrospinning silica sol-gel precursor containing vanadium oxytriisopropoxide (VOTIP, followed by calcinations at high temperature. The properties of the resulting inorganic hybrid nanofiber mats are compared to those of electrospun pure silica nanofibers. SEM images show fibers are submicron in diameter and their morphology is maintained after calcination. Physisorption experiments reveal that silica nanofiber mats have a high specific surface area of 63 m2/g. FT-IR spectra exhibit Si—O vibrations and indicate the presence of V2O5 in the fibers. XPS studies reveal that the ratio of Si to O is close to 0.5 on the surface of fibers and the amount of vanadium on the surface of fibers increases with calcination. XRD diffraction patterns show that silica nanofibers are amorphous and orthorhombic V2O5 crystals have formed after calcination. EFTEM images demonstrate the growth of crystals on the surface of fibers containing vanadium after calcination. SEM images of fibers with high-vanadium content (50 mol% V: Si show that vanadia crystals are mostly aligned along the fiber axis. XPS shows an increase in vanadium contents at the surface, and XRD patterns exhibit an increase in the degree of crystallinity. A coaxial electrospinning scheme has successfully been employed to selectively place V2O5 in the skin layer.

  13. Vanadium. Its role for humans.

    Science.gov (United States)

    Rehder, Dieter

    2013-01-01

    Vanadium is the 21st most abundant element in the Earth's crust and the 2nd-to-most abundant transition metal in sea water. The element is ubiquitous also in freshwater and nutrients. The average body load of a human individual amounts to 1 mg. The omnipresence of vanadium hampers checks directed towards its essentiality. However, since vanadate can be considered a close blueprint of phosphate with respect to its built-up, vanadate likely takes over a regulatory function in metabolic processes depending on phosphate. At common concentrations, vanadium is non-toxic. The main source for potentially toxic effects caused by vanadium is exposure to high loads of vanadium oxides in the breathing air of vanadium processing industrial enterprises. Vanadium can enter the body via the lungs or, more commonly, the stomach. Most of the dietary vanadium is excreted. The amount of vanadium resorbed in the gastrointestinal tract is a function of its oxidation state (V(V) or V(IV)) and the coordination environment. Vanadium compounds that enter the blood stream are subjected to speciation. The predominant vanadium species in blood are vanadate and vanadyl bound to transferrin. From the blood stream, vanadium becomes distributed to the body tissues and bones. Bones act as storage pool for vanadate. The aqueous chemistry of vanadium(V) at concentration applications of vanadium compounds are concerned, vanadium's mode of action appears to be related to the phosphate-vanadate antagonism, to the direct interaction of vanadium compounds or fragments thereof with DNA, and to vanadium's contribution to a balanced tissue level of reactive oxygen species. So far vanadium compounds have not yet found approval for medicinal applications. The antidiabetic (insulin-enhancing) effect, however, of a singular vanadium complex, bis(ethylmaltolato)oxidovanadium(IV) (BEOV), has revealed encouraging results in phase IIa clinical tests. In addition, in vitro studies with cell cultures and parasites, as

  14. Spin-Orbital Correlated Dynamics in the Spinel-Type Vanadium Oxide MnV2 O4

    Science.gov (United States)

    Matsuura, Keisuke; Sagayama, Hajime; Uehara, Amane; Nii, Yoichi; Kajimoto, Ryoichi; Kamazawa, Kazuya; Ikeuchi, Kazuhiko; Ji, Sungdae; Abe, Nobuyuki; Arima, Taka-hisa

    2017-07-01

    We investigate the magnetic dynamics in the spinel-type vanadium oxide MnV2 O4 . Inelastic neutron scattering around 10 meV and a Heisenberg model analysis have revealed that V3 + spin-wave modes exist at a lower-energy region than previously reported. The scattering around 20 meV cannot be reproduced with the spin-wave analysis. We propose that this scattering could originate from the spin-orbital coupled excitation. This scattering is most likely attributable to V3 + spin-wave modes, entangled with the orbital hybridization between t2 g orbitals.

  15. Vanadium Oxide Supported on MSU-1 as a Highly Active Catalyst for Dehydrogenation of Isobutane with CO2

    OpenAIRE

    Guosong Sun; Qingze Huang; Shiyong Huang; Qiuping Wang; Huiquan Li; Haitao Liu; Shijie Wan; Xuewang Zhang; Jinshu Wang

    2016-01-01

    Vanadium oxide supported on MSU-1, with VOx loading ranging from 2.5 to 17.5 wt. %, was developed as a highly active catalyst in dehydrogenation of isobutane with CO2. The obtained catalysts of VOx/MSU-1 were characterized by X-ray diffraction (XRD), N2 adsorption-desorption, and H2-temperature programmed reduction (H2-TPR) methods and the results showed that the large surface area of MSU-1 was favorable for the dispersion of VOx species and the optimal loading of VOx was 12.0 wt. %. Meanwhil...

  16. Thermo-electrical properties of composite semiconductor thin films composed of nanocrystalline graphene-vanadium oxides.

    Science.gov (United States)

    Jung, Hye-Mi; Um, Sukkee

    2014-12-01

    This paper presents an experimental comparative study involving the characterization of the thermo-electrical and structural properties of graphene-based vanadium oxide (graphene-VOx) composite thin films on insulating and conducting surfaces (i.e., fused quartz and acrylic resin-impregnated graphite) produced by a sol-gel process via dipping-pyrolysis. A combination of FE-SEM and XPS analyses revealed that the graphene-VOx composite thin films (coated onto fused quartz) exhibiting the microstructure of 2-graded nanowire arrays with a diameter of 40-80 nm were composed of graphene, a few residual oxygen-containing functional groups (i.e., C-O and C=O), and the VO2 Magnéli phase. The temperature-dependent electrical resistance measured on the as-deposited thin films clearly demonstrated that the graphene-VOx composite nanowire arrays thermally grown on fused quartz act as a semiconductor switch, with a transition temperature of 64.7 degrees C in the temperature range of -20 degrees C to 140 degrees C, resulting from the contributions of graphene and graphene oxides. In contrast, the graphene-VOx composite thin films deposited onto acrylic resin-impregnated graphite exhibit a superlinear semiconducting property of extremely low electrical resistance with negative temperature coefficients (i.e., approximately four orders of magnitude lower than that of the fused quartz), despite the similar microstructural and morphological characteristics. This difference is attributed to the synergistic effects of the paramagnetic metal feature of the tightly stacked nanowire arrays consisting of hexagonal V2O3 on the intrinsic electrical properties of the acrylic resin-impregnated graphite substrate, as revealed by FE-SEM, EDX, AFM, and XRD measurements. Although the thermo-sensitive electrical properties of the graphene-VOx composite thin films are very substrate specific, the applicability of graphene sheets can be considerably effective in the formation of highly planar arrays

  17. Electrodynamics of the vanadium oxides VO2 and V2O3

    OpenAIRE

    Qazilbash, M. M.; Schafgans, A. A.; Burch, K. S.; Yun, S. J.; Chae, B. G.; Kim, B. J.; Kim, H. T.; Basov, D. N.

    2008-01-01

    The optical/infrared properties of films of vanadium dioxide (VO2) and vanadium sesquioxide (V2O3) have been investigated via ellipsometry and near-normal incidence reflectance measurements from far infrared to ultraviolet frequencies. Significant changes occur in the optical conductivity of both VO2 and V2O3 across the metal-insulator transitions at least up to (and possibly beyond) 6 eV. We argue that such changes in optical conductivity and electronic spectral weight over a broad frequency...

  18. Annealing effects on the structural and optical properties of vanadium oxide film obtained by the hot-filament metal oxide deposition technique (HFMOD)

    Energy Technology Data Exchange (ETDEWEB)

    Scarminio, Jair; Silva, Paulo Rogerio Catarini da, E-mail: scarmini@uel.br, E-mail: prcsilva@uel.br [Universidade Estadual de Londrina (UEL), PR (Brazil). Departamento de Fisica; Gelamo, Rogerio Valentim, E-mail: rogelamo@gmail.com [Universidade Federal do Triangulo Mineiro (UFTM), Uberaba, MG (Brazil); Moraes, Mario Antonio Bica de, E-mail: bmoraes@mailhost.ifi.unicamp.br [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2017-01-15

    Vanadium oxide films amorphous, nonstoichiometric and highly absorbing in the optical region were deposited on ITO-coated glass and on silicon substrates, by the hot-filament metal oxide deposition technique (HFMOD) and oxidized by ex-situ annealing in a furnace at 200, 300, 400 and 500 deg C, under an atmosphere of argon and rarefied oxygen. X-ray diffraction, Raman and Rutherford backscattering spectroscopy as well as optical transmission were employed to characterize the amorphous and annealed films. When annealed at 200 and 300 deg C the as-deposited opaque films become transparent but still amorphous. Under treatments at 400 and 500 deg C a crystalline nonstoichiometric V{sub 2}O{sub 5} structure is formed. All the annealed films became semiconducting, with their optical absorption coefficients changing with the annealing temperature. An optical gap of 2.25 eV was measured for the films annealed at 400 and 500 deg C. The annealing in rarefied oxygen atmosphere proved to be a useful and simple ex-situ method to modulate the structural and optical properties of vanadium oxide films deposited by HFMOD technique. This technique could be applied to other amorphous and non-absorbing oxide films, replacing the conventional and sometimes expensive method of modulate desirable film properties by controlling the film deposition parameters. Even more, the HFMOD technique can be an inexpensive alternative to deposit metal oxide films. (author)

  19. Atomic-Scale Tuning of Layered Binary Metal Oxides for High Temperature Moving Assemblies

    Science.gov (United States)

    2015-06-01

    AFRL-OSR-VA-TR-2015-0166 Atomic-Scale Tuning of Layered Binary Metal OxideS ASHLIE MARTINI UNIVERSITY OF CALIFORNIA MERCED Final Report 06/01/2015...TASK NUMBER 5f.  WORK UNIT NUMBER 7.  PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) UNIVERSITY OF CALIFORNIA MERCED 5200 N LAKE RD MERCED , CA 95343...Organization / Institution name University of California Merced Grant/Contract Title The full title of the funded effort. Atomic-scale Tuning of Layered Binary

  20. Metal Oxide Supported Vanadium Substituted Keggin Type Polyoxometalates as Catalyst For Oxidation of Dibenzothiophene

    Science.gov (United States)

    Lesbani, Aldes; Novri Meilyana, Sarah; Karim, Nofi; Hidayati, Nurlisa; Said, Muhammad; Mohadi, Risfidian; Miksusanti

    2018-01-01

    Supported polyoxometalatate H4[γ-H2SiV2W10O40]·nH2O with metal oxide i.e. silica, titanium, and tantalum was successfully synthesized via wet impregnation method to form H4[γ-H2SiV2W10O40]·nH2O-Si, H4[γ-H2SiV2W10O40]·nH2O-Ti, and H4[γ-H2SiV2W10O40]·nH2O-Ta. Characterization was performed using FTIR spectroscopy, X-Ray analyses, and morphology analyses using SEM. All compounds were used as the catalyst for desulfurization of dibenzothiophene (DBT). Silica and titanium supported polyoxometalate H4[γ-H2SiV2W10O40]·nH2O better than tantalum due to retaining crystallinity after impregnation process. On the other hand, compound H H4[γ-H2SiV2W10O40]·nH2O-Ta showed high catalytic activity than other supported metal oxides for desulfurization of DBT. Optimization desulfurization process resulted in 99% conversion of DBT under a mild condition at 70 °C, 0.1 g catalyst, and reaction for 3 hours. Regeneration studies showed catalyst H4[γ-H2SiV2W10O40]·nH2O-Ti was remaining catalytic activity for desulfurization of DBT.

  1. Electrodeposition of Vanadium Oxides at Room Temperature as Cathodes in Lithium-Ion Batteries

    Directory of Open Access Journals (Sweden)

    Michalis Rasoulis

    2017-07-01

    Full Text Available Electrodeposition of vanadium pentoxide coatings was performed at room temperature and a short growth period of 15 min based on an alkaline solution of methanol and vanadyl (III acetyl acetonate. All samples were characterized by X-ray diffraction, Raman spectroscopy, field-emission scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The current density and electrolyte concentration were found to affect the characteristics of the as-grown coatings presenting enhanced crystallinity and porous structure at the highest values employed in both cases. The as-grown vanadium pentoxide at current density of 1.3 mA·cm−2 and electrolyte concentration of 0.5 M indicated the easiest charge transfer of Li+ across the vanadium pentoxide/electrolyte interface presenting a specific discharge capacity of 417 mAh·g−1, excellent capacitance retention of 95%, and coulombic efficiency of 94% after 1000 continuous Li+ intercalation/deintercalation scans. One may then suggest that this route is promising to prepare large area vanadium pentoxide electrodes with excellent stability and efficiency at very mild conditions.

  2. Enzymatic halogenation and oxidation using an alcohol oxidase-vanadium chloroperoxidase cascade

    NARCIS (Netherlands)

    But, Andrada; Noord, Van Aster; Poletto, Francesca; Sanders, Johan P.M.; Franssen, Maurice C.R.; Scott, Elinor L.

    2017-01-01

    The chemo-enzymatic cascade which combines alcohol oxidase from Hansenula polymorpha (AOXHp) with vanadium chloroperoxidase (VCPO), for the production of biobased nitriles from amino acids was investigated. In the first reaction H2O2 (and acetaldehyde) are generated from ethanol and oxygen by AOXHp.

  3. Dehydrogenation of methanol by vanadium-oxide and -hydroxide cluster cations in the gas phase

    Czech Academy of Sciences Publication Activity Database

    Feyel, S.; Scharfenberg, L.; Daniel, Ch.; Hartl, H.; Schröder, Detlef; Schwarz, H.

    2007-01-01

    Roč. 111, č. 17 (2007), s. 3278-3286 ISSN 1089-5639 Grant - others:Deutsche Forschungsgemeinschaft(DE) SFB546 Institutional research plan: CEZ:AV0Z40550506 Keywords : C-H activation * cluster * mass spectroscopy * methanol * vanadium Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.918, year: 2007

  4. Different threshold and bipolar resistive switching mechanisms in reactively sputtered amorphous undoped and Cr-doped vanadium oxide thin films

    Science.gov (United States)

    Rupp, Jonathan A. J.; Querré, Madec; Kindsmüller, Andreas; Besland, Marie-Paule; Janod, Etienne; Dittmann, Regina; Waser, Rainer; Wouters, Dirk J.

    2018-01-01

    This study investigates resistive switching in amorphous undoped and Cr-doped vanadium oxide thin films synthesized by sputtering deposition at low oxygen partial pressure. Two different volatile threshold switching characteristics can occur as well as a non-volatile bipolar switching mechanism, depending on device stack symmetry and Cr-doping. The two threshold switching types are associated with different crystalline phases in the conduction filament created during an initial forming step. The first kind of threshold switching, observed for undoped vanadium oxide films, was, by its temperature dependence, proven to be associated with a thermally triggered insulator-to-metal transition in a crystalline VO2 phase, whereas the threshold switch observed in chromium doped films is stable up to 90 °C and shows characteristics of an electronically induced Mott transition. This different behaviour for undoped versus doped films has been attributed to an increased stability of V3+ due to the Cr3+ doping (as evidenced by X-ray photoelectron spectroscopy analysis), probably favouring the creation of a crystalline Cr-doped V2O3 phase (rather than a Cr-doped VO2 phase) during the energetic forming step. The symmetric Pt/a-(VCr)Ox/Pt device showing high temperature stable threshold switching may find interesting applications as a possible new selector device for resistive switching memory (ReRAM) crossbar arrays.

  5. Rf-sputtered vanadium oxide thin films: effect of oxygen partial pressure on structural and electrochemical properties

    CERN Document Server

    Park, Y J; Ryu, K S; Chang, S H; Park, S C; Yoon, S M; Kim, D K

    2001-01-01

    Vanadium oxide thin films with thickness of about 2000 A have been prepared by radio frequency sputter deposition using a V sub 2 O sub 5 target in a mixed argon and oxygen atmosphere with different Ar/O sub 2 ratio ranging from 99/1 to 90/10. X-ray diffraction and X-ray absorption near edge structure spectroscopic studies show that the oxygen content higher than 5% crystallizes a stoichiometric V sub O sub 5 phase, while oxygen deficient phase is formed in the lower oxygen content. The oxygen content in the mixed Ar + O sub 2 has a significant influence on electrochemical lithium insertion/deinsertion property. The discharge-charge capacity of vanadium oxide film increases with increasing the reactive oxygen content. The V sub O sub 5 film deposited at the Ar/O sub 2 ratio of 90/10 exhibits high discharge capacity of 100 mu Ah/cm sup 2 -mu m along with good cycle performance.

  6. Hydrothermal synthesis of hydrated vanadium oxide nanobelts using poly (ethylene oxide) as a template

    Energy Technology Data Exchange (ETDEWEB)

    Subba Reddy, Ch.V.; Mho, Sun-il [Division of Energy Systems Research, Ajou University, Suwon 443-749 (Korea); Kalluru, Rajamohan R.; Williams, Quinton L. [Department of Physics, Atmospheric Sciences and Geosciences, 1400, J R Lynch Street, Jackson State University, Jackson, MS 39217-17660 (United States)

    2008-05-01

    With the aim of obtaining nanodevices as batteries, sensors and fuel cells, we prepared V{sub 2}O{sub 5} and V{sub 3}O{sub 7}.H{sub 2}O nanobelts by a simple hydrothermal process using poly (ethylene oxide) (PEO) as a template. The yielding percentage of the nanomaterial is less in polymer-free V{sub 2}O{sub 5} nanobelts and material size is also big. It is apparent that PEO used V{sub 3}O{sub 7}.H{sub 2}O form a continuous and relatively homogeneous matrix with a clearly 1-5 {mu}m long and 50-150 nm diameter nanobelts morphology. The SEM micrographs suggest that there is no bulk deposition of polymer on the surface of the nano-crystallites. Strong interaction between the vanadyl group and the polymer during the formation process has been identified by the shifts of the vanadyl vibration peaks. The CV curve of the electrode made of the V{sub 3}O{sub 7}.H{sub 2}O nanobelts have higher current densities than the CV curve of the electrode made of V{sub 2}O{sub 5} nanobelts. (author)

  7. Results on the electrochromic and photocatalytic properties of vanadium doped tungsten oxide thin films prepared by reactive dc magnetron sputtering technique

    International Nuclear Information System (INIS)

    Karuppasamy, K Muthu; Subrahmanyam, A

    2008-01-01

    In this investigation, vanadium doped tungsten oxide (V : WO 3 ) thin films are prepared at room temperature by reactive dc magnetron sputtering employing a tungsten-vanadium 'inlay' target. In comparison with pure sputtered tungsten oxide thin films, 11% vanadium doping is observed to decrease the optical band gap, enhance the colour neutral property, decrease the coloration efficiency (from 121 to 13 cm 2 C -1 ), increase the surface work function (4.68-4.83 eV) and significantly enhance the photocatalytic efficiency in WO 3 thin films. These observations suggest that (i) vanadium creates defect levels that are responsible for optical band gap reduction, (ii) multivalent vanadium bonding with terminal oxygen in the WO 3 lattice gives rise to localized covalent bonds and thus results in an increase in the work function, and (iii) a suitable work function of V : WO 3 with ITO results in an enhancement of the photocatalytic activity. These results on electrochromic and photocatalytic properties of V : WO 3 thin films show good promise in the low maintenance window application

  8. Magnetism-tuning strategies for graphene oxide based on magnetic oligoacene oxide patches model.

    Science.gov (United States)

    Wen, Yanjie; Yen, Chia-Liang; Yan, Linyin; Kono, Hirohiko; Lin, Sheng-Hsien; Ling, Yong-Chien

    2018-01-31

    Graphene oxide (GO) has wide application potential owing to its 2D structure and diverse modification sites for various targeted uses. The introduction of magnetism into GO structures has further advanced the controllability of the application of GO materials. Herein, the concept of modular design and modeling was applied to tune the magnetism of GO. To obtain desirable magnetic properties, diradical-structured GO patches were formed by the introduction of two functional groups to break the Kekule structure of the benzene ring. In these diradical GO patches, the energy of the triplet state was lower than those of the open-shell broken-symmetry singlet state and closed-shell singlet state. To create such multi-radical patches, a practical approach is to determine a substantial spatial separation of the α and β spin densities in the molecule. Thus, systematic design strategies and tests were evaluated. The first strategy was extending the distance between the distribution center of the α and β spin densities; the second was controlling the delocalization directions of the α and β electrons; the third was controlling the delocalization extension of the α and β electrons by oxidative modification, and finally introducing multi-radical structures into the molecular system and controlling the position of each radical. Herein, successful molecular models with a large magnetic coupling constant (∼3600 cm -1 ) were obtained. This study paves the way to explore ferromagnetic MGO guided by theoretical study, which may become reality soon.

  9. Fabrication of polypyrrole/vanadium oxide nanotube composite with enhanced electrochemical performance as cathode in rechargeable batteries

    Science.gov (United States)

    Zhou, Xiaowei; Chen, Xu; He, Taoling; Bi, Qinsong; Sun, Li; Liu, Zhu

    2017-05-01

    Vanadium oxide nanotubes (VOxNTs) with hollow as well as multi-walled features were fabricated under hydrothermal condition by soft-template method. This novel VOxNTs can be used as cathode material for lithium ion batteries (LIBs), but displaying low specific capacity and poor cycling performance owing to the residual of a mass of soft-template (C12H27N) and intrinsic low conductivity of VOx. Cation exchange technique and oxidative polymerization process of pyrrole monomers were conducted to wipe off partial soft-template without electrochemical activity within VOxNTs and simultaneously form polypyrrole coating on VOxNTs, respectively. The resulting polypyrrole/VOxNTs nanocomposite delivers much improved capacity and cyclic stability. Further optimizations, such as complete elimination of organic template and enhancing the crystallinity, can make this unique nanostructure a promising cathode for LIBs.

  10. Band gap tuning of amorphous Al oxides by Zr alloying

    DEFF Research Database (Denmark)

    Canulescu, Stela; Jones, N. C.; Borca, C. N.

    2016-01-01

    The optical band gap and electronic structure of amorphous Al-Zr mixed oxides, with Zr content ranging from4.8 to 21.9% were determined using vacuum ultraviolet (VUV) and X-ray absorption spectroscopy (XAS). Thelight scattering by the nano-porous structure of alumina at low wavelengths was estima...

  11. Band gap tuning of amorphous Al oxides by Zr alloying

    Energy Technology Data Exchange (ETDEWEB)

    Canulescu, S., E-mail: stec@fotonik.dtu.dk; Schou, J. [Department of Photonics Engineering, Technical University of Denmark, 4000 Roskilde (Denmark); Jones, N. C.; Hoffmann, S. V. [ISA, Department of Physics and Astronomy, Aarhus University, 8000 Aarhus (Denmark); Borca, C. N.; Piamonteze, C. [Swiss Light Source, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland); Rechendorff, K.; Nielsen, L. P.; Almtoft, K. P. [Danish Technological Institute, Kongsvang Alle 29, 8000 Aarhus (Denmark); Gudla, V. C.; Bordo, K.; Ambat, R. [Department of Mechanical Engineering, Technical University of Denmark, 2800 Kgs-Lyngby (Denmark)

    2016-08-29

    The optical band gap and electronic structure of amorphous Al-Zr mixed oxides with Zr content ranging from 4.8 to 21.9% were determined using vacuum ultraviolet and X-ray absorption spectroscopy. The light scattering by the nano-porous structure of alumina at low wavelengths was estimated based on the Mie scattering theory. The dependence of the optical band gap of the Al-Zr mixed oxides on the Zr content deviates from linearity and decreases from 7.3 eV for pure anodized Al{sub 2}O{sub 3} to 6.45 eV for Al-Zr mixed oxides with a Zr content of 21.9%. With increasing Zr content, the conduction band minimum changes non-linearly as well. Fitting of the energy band gap values resulted in a bowing parameter of ∼2 eV. The band gap bowing of the mixed oxides is assigned to the presence of the Zr d-electron states localized below the conduction band minimum of anodized Al{sub 2}O{sub 3}.

  12. Preparation and characterization of graphene-based vanadium oxide composite semiconducting films with horizontally aligned nanowire arrays

    International Nuclear Information System (INIS)

    Jung, Hye-Mi; Um, Sukkee

    2016-01-01

    Highly oriented crystalline hybrid thin films primarily consisting of Magnéli-phase VO 2 and conductive graphene nanoplatelets are fabricated by a sol–gel process via dipping pyrolysis. A combination of chemical, microstructural, and electrical analyses reveals that graphene oxide (GO)-templated vanadium oxide (VO x ) nanocomposite films exhibit a vertically stacked multi-lamellar nanostructure consisting of horizontally aligned vanadium oxide nanowire (VNW) arrays along the (hk0) set of planes on a GO template, with an average crystallite size of 41.4 Å and a crystallographic tensile strain of 0.83%. In addition, GO-derived VO x composite semiconducting films, which have an sp 3 /sp 2 bonding ratio of 0.862, display thermally induced electrical switching properties in the temperature range of − 20 °C to 140 °C, with a transition temperature of approximately 65 °C. We ascribe these results to the use of GO sheets, which serve as a morphological growth template as well as an electrochemically tunable platform for enhancing the charge-carrier mobility. Moreover, the experimental studies demonstrate that graphene-based Magnéli-phase VO x composite semiconducting films can be used in advanced thermo-sensitive smart sensing/switching applications because of their outstanding thermo-electrodynamic properties and high surface charge density induced by the planar-type VNWs. - Highlights: • VO x -graphene oxide composite (G/VO x ) films were fabricated by sol–gel process. • The G/VO x films mainly consisted of Magnéli-phase VO 2 and reduced graphene sheets. • The G/VO x films exhibited multi-lamellar textures with planar VO x nanowire arrays. • The G/VO x films showed the thermo-sensitive electrical switching properties. • Effects of GOs on the electrical characteristics of the G/VO x films were discussed.

  13. Hydration effects on the molecular structure of silica-supported vanadium oxide catalysts: A combined IR, Raman, UV–vis and EXAFS study

    NARCIS (Netherlands)

    Keller, D.E.; Visser, T.; Soulimani, F.; Koningsberger, D.C.; Weckhuysen, B.M.

    2007-01-01

    The effect of hydration on the molecular structure of silica-supported vanadium oxide catalysts with loadings of 1–16 wt.% V has been systematically investigated by infrared, Raman, UV–vis and EXAFS spectroscopy. IR and Raman spectra recorded during hydration revealed the formation of V–OH groups,

  14. Gas-Phase Chemistry of Vanadium-Oxide Cluster Cations VmOn+ (m = 1 - 4, n = 1 - 10) with Water and Molecular Oxygen

    Czech Academy of Sciences Publication Activity Database

    Feyel, S.; Schröder, Detlef; Schwarz, H.

    -, č. 31 (2008), s. 4961-4967 ISSN 1434-1948 Grant - others:DFG(DE) SFB546 Institutional research plan: CEZ:AV0Z40550506 Keywords : clusters * isotope exchange * mass spectrometry * oxygen * vanadium oxide s Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.694, year: 2008

  15. Dehydration and Dehydrogenation of Alcohols with Mononuclear Cationic Vanadium Oxides in the Gas Phase and Energetics of VOnH0/+ (n = 2, 3)

    Czech Academy of Sciences Publication Activity Database

    Engeser, M.; Schröder, Detlef; Schwarz, H.

    -, č. 17 (2007), s. 2454-2464 ISSN 1434-1948 Grant - others:Deutsche Forschungsgemeinschaft(DE) SFB546 Institutional research plan: CEZ:AV0Z40550506 Keywords : alcohol oxidation * dehydration * mass spectroscopy * metal alkoxides * vanadium Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.597, year: 2007

  16. Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

    DEFF Research Database (Denmark)

    Martinez, Nieves Espinosa; Dam, Henrik Friis; Tanenbaum, David M.

    2011-01-01

    The use of hydrated vanadium(V)oxide as a replacement of the commonly employed hole transporting material PEDOT:PSS was explored in this work. Polymer solar cells were prepared by spin coating on glass. Polymer solar cells and modules comprising 16 serially connected cells were prepared using full...

  17. Vanadium oxide/polypyrrole aerogel nanocomposites. Technical report, 1 June 1995-31 May 1996

    Energy Technology Data Exchange (ETDEWEB)

    Dave, B.C.; Bunn, B.; Leroux, F.; Nazar, L.F.; Wong, H.P.

    1996-06-18

    Vanadium pentoxide/polypyrrole aerogel (ARG) nanocomposites were prepared by hydrolysis of VO(OC3H7)3 using pyrrole/water/acetone mixtures. Monolithic green-black gels with polypyrrole/V ratios ranging from 0.15 to 1.0 resulted from simultaneous polymerization of the pyrrole and vanadium alkoxide precursors. Supercritical drying yielded high surface (150-200 sq meters/g) aerogels, of sufficient mechanical integrity to allow them to be cut without fracturing. TEM studies of the aerogels show that they are comprised of fibers similar to that of V2O5 ARG`s, but with a much shorter chain length. Evidence from IR that the inorganic and organic components strongly interact leads us to propose that this impedes the vanadium condensation process. The result is ARG`s that exhibit decreased electronic conductivity with increasing polymer content. Despite the unexpected deleterious effect of the conductive polymer on the bulk conductivity, at low polymer content, the nanocomposite materials show enhanced electrochemical properties for Li insertion compared to the pristine aerogel.

  18. Hexagonal mesoporous titanosilicates as support for vanadium oxide-Promising catalysts for the oxidative dehydrogenation of n-butane

    Czech Academy of Sciences Publication Activity Database

    Setnička, M.; Čičmanec, P.; Bulánek, R.; Zukal, Arnošt; Pastva, Jakub

    2013-01-01

    Roč. 204, APR 2013 (2013), s. 132-139 ISSN 0920-5861 R&D Projects: GA ČR GAP106/10/0196 Institutional support: RVO:61388955 Keywords : mesoporous titanosilicate * hexagonal mesoporous structure * vanadium Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.309, year: 2013

  19. The oxygen-assisted transformation of propane to CO{sub x}/H{sub 2} through combined oxidation and WGS reactions catalyzed by vanadium oxide-based catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ballarini, N.; Battisti, A.; Cavani, F.; Cericola, A.; Lucarelli, C.; Racioppi, S. [Dipartimento di Chimica Industriale e dei Materiali, Viale Risorgimento 4, INSTM, Research Unit of Bologna, 40136 Bologna (Italy); Arpentinier, P. [Air Liquide, Centre de Recherche Claude Delorme, les Loges en Josas, 78354 Jouy-en-Josas Cedex (France)

    2006-08-15

    This paper reports about the gas-phase oxidation of propane catalyzed by bulk vanadium oxide and by alumina- and silica-supported vanadium oxide. The reaction was studied with the aim of finding conditions at which the formation of H{sub 2} and CO{sub 2} is preferred over that of CO, H{sub 2}O and of products of alkane partial oxidation. It was found that with bulk V{sub 2}O{sub 5} considerable amounts of H{sub 2} are produced above 400{sup o}C, the temperature at which the limiting reactant, oxygen, is totally consumed. The formation of H{sub 2} derived from the combination of: (1) oxidation reactions, with generation of CO, CO{sub 2}, oxygenates (mainly acetic acid), propylene and H{sub 2}O, all occurring in the fraction of catalytic bed that operated in the presence of gas-phase oxygen, and (2) WGS reaction, propane dehydrogenation and coke formation, that instead occurred in the fraction of bed operating under anaerobic conditions. This combination of different reactions in a single catalytic bed was possible because of the reduction of V{sub 2}O{sub 5} to V{sub 2}O{sub 3} at high temperature, in the absence of gas-phase oxygen. In fact, vanadium sesquioxide was found to be an effective catalyst for the WGS, while V{sub 2}O{sub 5} was inactive in this reaction. The same combination of reactions was not possible when vanadium oxide was supported over high-surface area silica or alumina; this was attributed to the fact that in these catalysts vanadium was not reduced below the oxidation state V{sup 4+}, even under reaction conditions leading to total oxygen conversion. In consequence, these catalysts produced less H{sub 2} than bulk vanadium oxide. (author)

  20. Electronic, thermoelectric and optical properties of vanadium oxides: VO2, V2O3 and V2O 5

    Science.gov (United States)

    Lamsal, Chiranjivi

    Correlated electrons in vanadium oxides are responsible for their extreme sensitivity to external stimuli such as pressure, temperature or doping. As a result, several vanadium oxides undergo insulator-to-metal phase transition (IMT) accompanied by structural change. Unlike vanadium pentoxide (V2O5), vanadium dioxide (VO2) and vanadium sesquioxide (V2O3) show IMT in their bulk phases. In this study, we have performed one electron Kohn-Sham electronic band-structure calculations of VO2, V2O3 and V2O 5 in both metallic and insulating phases, implementing a full ab-initio simulation package based on Density Functional Theory (DFT), Plane Waves and Pseudopotentials (PPs). Electronic band structures are found to be influenced by crystal structure, crystal field splitting and strong hybridization between O2p and V3d bands. "Intermediate bands", with narrow band widths, lying just below the higher conduction bands, are observed in V2O 5 which play a critical role in optical and thermoelectric processes. Similar calculations are performed for both metallic and insulating phases of bulk VO2 and V2O3. Unlike in the metallic phase, bands corresponding to "valence electrons" considered in the PPs are found to be fully occupied in the insulating phases. Transport parameters such as Seebeck coefficient, electrical conductivity and thermal (electronic) conductivity are studied as a function of temperature at a fixed value of chemical potential close to the Fermi energy using Kohn-Sham band structure approach coupled with Boltzmann transport equations. Because of the layered structure and stability, only V2O5 shows significant thermoelectric properties. All the transport parameters have correctly depicted the highly anisotropic electrical conduction in V2O 5. Maxima and crossovers are also seen in the temperature dependent variation of Seebeck coefficient in V2O5, which can be consequences of "specific details" of the band structure and anisotropic electron-phonon interactions

  1. Fabrication and morphology tuning of graphene oxide nanoscrolls

    Science.gov (United States)

    Amadei, Carlo A.; Stein, Itai Y.; Silverberg, Gregory J.; Wardle, Brian L.; Vecitis, Chad D.

    2016-03-01

    Here we report the synthesis of graphene oxide nanoscrolls (GONS) with tunable dimensions via low and high frequency ultrasound solution processing techniques. GONS can be visualized as a graphene oxide (GO) sheet rolled into a spiral-wound structure and represent an alternative to traditional carbon nano-morphologies. The scrolling process is initiated by the ultrasound treatment which provides the scrolling activation energy for the formation of GONS. The GO and GONS dimensions are observed to be a function of ultrasound frequency, power density, and irradiation time. Ultrasonication increases GO and GONS C-C bonding likely due to in situ thermal reduction at the cavitating bubble-water interface. The GO area and GONS length are governed by two mechanisms; rapid oxygen defect site cleavage and slow cavitation mediated scission. Structural characterization indicates that GONS with tube and cone geometries can be formed with both narrow and wide dimensions in an industrial-scale time window. This work paves the way for GONS implementation for a variety of applications such as adsorptive and capacitive processes.Here we report the synthesis of graphene oxide nanoscrolls (GONS) with tunable dimensions via low and high frequency ultrasound solution processing techniques. GONS can be visualized as a graphene oxide (GO) sheet rolled into a spiral-wound structure and represent an alternative to traditional carbon nano-morphologies. The scrolling process is initiated by the ultrasound treatment which provides the scrolling activation energy for the formation of GONS. The GO and GONS dimensions are observed to be a function of ultrasound frequency, power density, and irradiation time. Ultrasonication increases GO and GONS C-C bonding likely due to in situ thermal reduction at the cavitating bubble-water interface. The GO area and GONS length are governed by two mechanisms; rapid oxygen defect site cleavage and slow cavitation mediated scission. Structural characterization

  2. Structural and electrical properties of different vanadium oxide phases in thin film form synthesized using pulsed laser deposition

    Science.gov (United States)

    Majid, S. S.; Shukla, D. K.; Rahman, F.; Choudhary, R. J.; Phase, D. M.

    2015-06-01

    We present here the structural and electrical properties of the thin films of V2O3 (Vanadium sesquioxide) and V5O9. Both these oxide phases, V2O3 and V5O9, have beenachieved on (001) orientedSi substrate using the V2O5 target by optimizing the deposition parameters using pulsed laser deposition technique (PLD).Deposited films were characterized by X-ray diffraction(XRD)and four probe temperature dependent resistivity measurements. XRD studies reveal the V2O3 and V5O9 phases and the amount of strain present in both these films. The temperature dependency of electrical resistivity confirmed the characteristic metal-insulator transitions (MIT) for both the films, V2O3 and V5O9.

  3. Flux pinning by voids in surface-oxidized superconducting niobium and vanadium

    International Nuclear Information System (INIS)

    Meij, G.P. van der.

    1984-03-01

    The volume pinning force in several niobium and vanadium samples with voids is determined at various temperatures. Reasonable agreement is found with the collective pinning theory of Larkin and Ovchinnikov above the field of maximum pinning, if the flux line lattice is assumed to be amorphous in this region and if the elementary pinning force is calculated from the quasi-classical theory of Thuneberg, Kurkijaervi, and Rainer. Also some history and relaxation effects are studied in an alternating field. A qualitative explanation is given in terms of flux line dislocations, which reduce the shear strength of the flux line lattice. (Auth.)

  4. Flux pinning by voids in surface-oxidized superconducting niobium and vanadium

    International Nuclear Information System (INIS)

    Meij, G.P. van der.

    1984-01-01

    This thesis describes a study of flux pinning by small voids (roughly 10 nm) in the type II superconductors niobium and vanadium. These voids were created in rectangular foils (with typical dimensions of 30x3x0.2 mm) during an irradiation with fast neutrons in the High Flux Reactor at Petten at temperatures between 400 and 1000 0 C. The pinning force per unit volume is determined from the magnetic properties of the superconducting samples. The experiments were carried out in a slowly ramped magnetic field, as well as in a combination of a static and a much smaller alternating field. (Auth.)

  5. A method for the determination of vanadium and iron oxidation states in naturally occurring oxides and silicates

    Science.gov (United States)

    Wanty, R.B.; Goldhaber, M.B.

    1985-01-01

    A valence-specific analytical method for determining V3+ in ore minerals has been developed that involves two steps: dissolution of a mineral sample without disturbing the V3+/Vtot ratio, followed by determination of V3+ in the presence of V4+. The samples are dissolved in a mixture of hydrofluoric and sulphuric acids at 100?? in Teflon-lined reaction vessels. Tervalent vanadium is then determined colorimetrically by formation of a V3+-thiocyanate complex in aqueous-acetone medium. Fe3+ is measured semi-quantitatively in the same solution. The method has been tested with two naturally occurring samples containing vanadium and iron. The results obtained were supported by those obtained by other methods, including electron spin resonance spectroscopy, thermogravimetric analysis, and Mo??ssbauer spectroscopy. ?? 1985.

  6. Modification of the Properties of Vanadium Oxide Thin Films by Plasma-Immersion Ion Implantation

    Directory of Open Access Journals (Sweden)

    Sergey Burdyukh

    2018-01-01

    Full Text Available The paper describes the effect of doping with hydrogen and tungsten by means of plasma-immersion ion implantation (PIII on the properties of vanadium dioxide and hydrated vanadium pentoxide films. It is shown that the parameters of the metal-insulator phase transition in VO2 thin films depend on the hydrogen implantation dose. Next, we explore the effect of PIII on composition, optical properties, and the internal electrochromic effect (IECE in V2O5·nH2O films. The variations in the composition and structure caused by the hydrogen insertion, as well as those caused by the electrochromic effect, are studied by nuclear magnetic resonance, thermogravimetry, Raman spectroscopy, and X-ray structural analysis. It is shown that the ion implantation-induced hydrogenation can substantially enhance the manifestation and performance of the IECE in V2O5 xerogel films. Finally, the effect of PIII-assisted doping with W on the parameters of electrical switching in Au/V2O5·nH2O/Au sandwich structures is examined. It is shown that implanting small tungsten doses improves the switching parameters after forming. When implanting large doses, switching is observed without electroforming, and if electroforming is applied, the switching effect, on the contrary, disappears.

  7. Vanadium-substituted heteropolyacids immobilized on amine- functionalized mesoporous MCM-41: A recyclable catalyst for selective oxidation of alcohols with H{sub 2}O{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Xinbo [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China); Wang, Danjun [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China); College of Chemistry Chemical Engineering, Yanan University, Shaanxi Key Laboratory of Chemical Reaction Engineering, Yan' an 716000 (China); Li, Kebin [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China); Zhen, Yanzhong [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China); College of Chemistry Chemical Engineering, Yanan University, Shaanxi Key Laboratory of Chemical Reaction Engineering, Yan' an 716000 (China); Hu, Huaiming [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China); Xue, Ganglin, E-mail: xglin707@163.com [Key Laboratory of Synthetic and Natural Functional Molecule Chemistry, Department of Chemistry (Ministry of Education), Northwest University, Xi' an 710069 (China)

    2014-09-15

    Graphical abstract: Vanadium-substituted phosphotungstic acids are immobilized on amine- functionalized mesoporous MCM-41 and the hybrid catalyst is proved to be a highly efficient solid catalyst for the oxidation of aromatic alcohols to the corresponding carbonyl compounds with H{sub 2}O{sub 2}, featured by the high conversion and selectivity, easy recovery, and quite steady reuse. - Highlights: • Vanadium-substituted phosphotungstic acid immobilized on amine-functionalized mesoporous MCM-41 are prepared. • HPAs were fixed on the inner surface of mesoporous MCM-41 by chemical bonding to aminosilane groups. • The hybrid catalyst showed much higher catalytic activity than the pure HPAs. • The hybrid catalyst is a highly efficient recyclable solid catalyst for the selective oxidation of aromatic alcohols. - Abstract: New hybrid materials of vanadium-substituted phosphotungstic acids (VHPW) immobilized on amine-functionalized mesoporous MCM-41 (VHPW/MCM-41/NH{sub 2}) are prepared and characterized by FT-IR, XRD, N{sub 2} adsorption, elemental analysis, SEM and TEM for their structural integrity and physicochemical properties. It is found that the structure of the heteropolyacids is retained upon immobilization over mesoporous materials. The catalytic activities of these hybrid materials are tested in the selective oxidation of alcohols to the carbonyl products with 30% aqueous H{sub 2}O{sub 2} as oxidant in toluene. The catalytic activities of different number of vanadium-substituted phosphotungstic acid are investigated, and among the catalysts, H{sub 5}[PV{sub 2}W{sub 10}O{sub 40}] immobilized on amine-functionalized MCM-41 exhibits the highest activity with 97% conversion and 99% selectivity in the oxidation of benzyl alcohol to benzaldehyde. The hybrid catalyst is proved to be a highly efficient recyclable solid catalyst for the selective oxidation of aromatic alcohols to the corresponding aldehydes with H{sub 2}O{sub 2}.

  8. Samarium-modified vanadium phosphate catalyst for the selective oxidation of n-butane to maleic anhydride

    International Nuclear Information System (INIS)

    Wu, Hua-Yi; Wang, Hai-Bo; Liu, Xin-Hua; Li, Jian-Hui; Yang, Mei-Hua; Huang, Chuan-Jing; Weng, Wei-Zheng; Wan, Hui-Lin

    2015-01-01

    Graphical abstract: The addition of a small amount of Sm into VPO catalyst brought about great changes in its physicochemical properties such as surface area, surface morphology, phase composition and redox property, thus leading to a higher catalytic performance in the selective oxidation of n-butane to maleic anhydride, as compared to the undoped VPO catalyst. - Highlights: • The addition of Sm leads to great changes in the structure of VPO catalyst. • Sm improves performance of VPO for oxidation of n-butane to maleic anhydride. • Catalytic performance is closely related to structure of VPO catalyst. - Abstract: A series of samarium-modified vanadium phosphate catalysts were prepared and studied in selective oxidation of n-butane to maleic anhydride. The catalytic evaluation showed that Sm modification significantly increased the overall n-butane conversion and intrinsic activity. N 2 -adsorption, XRD, SEM, Raman, XPS, EPR and H 2 -TPR techniques were used to investigate the intrinsic difference among these catalysts. The results revealed that the addition of Sm to VPO catalyst can increase the surface area of the catalyst, lead to a significant change in catalyst morphology from plate-like structure into rosette-shape clusters, and largely promote the formation of (VO) 2 P 2 O 7 . All of these were related to the different catalytic performance of Sm-doped and undoped VPO catalysts. The roles of the different VOPO 4 phases and the influence of Sm were also described and discussed

  9. Structural characterization of vanadium oxide catalysts supported on nanostructured silica SBA-15 using X-ray absorption spectroscopy

    Directory of Open Access Journals (Sweden)

    Walter Anke

    2010-02-01

    Full Text Available Abstract The local structure of vanadium oxide supported on nanostructured SiO2 (VxOy/SBA-15 was investigated by in situ X-ray absorption spectroscopy (XAS. Because the number of potential parameters in XAS data analysis often exceeds the number of "independent" parameters, evaluating the reliability and significance of a particular fitting procedure is mandatory. The number of independent parameters (Nyquist may not be sufficient. Hence, in addition to the number of independent parameters, a novel approach to evaluate the significance of structural fitting parameters in XAS data analysis is introduced. Three samples with different V loadings (i.e. 2.7 wt %, 5.4 wt %, and 10.8 wt % were employed. Thermal treatment in air at 623 K resulted in characteristic structural changes of the V oxide species. Independent of the V loading, the local structure around V centers in dehydrated VxOy/SBA-15 corresponded to an ordered arrangement of adjacent V2O7 units. Moreover, the V2O7 units were found to persist under selective oxidation reaction conditions.

  10. Melt quenched vanadium oxide embedded in graphene oxide sheets as composite electrodes for amperometric dopamine sensing and lithium ion battery applications

    Energy Technology Data Exchange (ETDEWEB)

    Sreejesh, M. [Materials Research Laboratory, Department of Physics, National Institute of Technology Karnataka, P.O. Srinivasnagar, Surathkal, Mangaluru 575 025 (India); Shenoy, Sulakshana [Functional Nanostructured Materials Research Laboratory, Department of Physics, National Institute of Technology Karnataka, P.O. Srinivasnagar, Surathkal, Mangaluru 575 025 (India); Sridharan, Kishore, E-mail: kishore@nitk.edu.in [Functional Nanostructured Materials Research Laboratory, Department of Physics, National Institute of Technology Karnataka, P.O. Srinivasnagar, Surathkal, Mangaluru 575 025 (India); Kufian, D.; Arof, A.K. [Centre for Ionics, Department of Physics, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Nagaraja, H.S., E-mail: nagaraja@nitk.edu.in [Materials Research Laboratory, Department of Physics, National Institute of Technology Karnataka, P.O. Srinivasnagar, Surathkal, Mangaluru 575 025 (India)

    2017-07-15

    Highlights: • Layered vanadium oxides (MVO) are prepared through melt quenching process. • MVO is hydrothermally treated with graphene oxide to form MVGO composites. • Dopamine detection capacity using MVGO is 0.07 μM with good selectivity. • Sensitivity of dopamine detection is 25.02 μA mM{sup −1} cm{sup −2}. • Discharge capacity of MVGO electrode is 200 mAhg{sup −1} after 10 cycles. - Abstract: Electrochemical sensors and lithium-ion batteries are two important topics in electrochemistry that have attracted much attention owing to their extensive applications in enzyme-free biosensors and portable electronic devices. Herein, we report a simple hydrothermal approach for synthesizing composites of melt quenched vanadium oxide embedded on graphene oxide of equal proportion (MVGO50) for the fabrication of electrodes for nonenzymatic amperometic dopamine sensor and lithium-ion battery applications. The sensing performance of MVGO50 electrodes through chronoamperometry studies in 0.1 M PBS solution (at pH 7) over a wide range of dopamine concentration exhibited a highest sensitivity of 25.02 μA mM{sup −1} cm{sup −2} with the lowest detection limit of 0.07 μM. In addition, the selective sensing capability of MVGO50 was also tested through chronoamperometry studies by the addition of a very small concentration of dopamine (10 μM) in the presence of a fairly higher concentration of uric acid (10 mM) as the interfering species. Furthermore, the reversible lithium cycling properties of MVGO50 are evaluated by galvanostatic charge-discharge cycling studies. MVGO50 electrodes exhibited enhanced rate capacity of up to 200 mAhg{sup −1} at a current of 0.1C rate and remained stable during cycling. These results indicate that MVGO composites are potential candidates for electrochemical device applications.

  11. Preparation and characterization of graphene-based vanadium oxide composite semiconducting films with horizontally aligned nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hye-Mi; Um, Sukkee, E-mail: sukkeeum@hanyang.ac.kr

    2016-05-01

    Highly oriented crystalline hybrid thin films primarily consisting of Magnéli-phase VO{sub 2} and conductive graphene nanoplatelets are fabricated by a sol–gel process via dipping pyrolysis. A combination of chemical, microstructural, and electrical analyses reveals that graphene oxide (GO)-templated vanadium oxide (VO{sub x}) nanocomposite films exhibit a vertically stacked multi-lamellar nanostructure consisting of horizontally aligned vanadium oxide nanowire (VNW) arrays along the (hk0) set of planes on a GO template, with an average crystallite size of 41.4 Å and a crystallographic tensile strain of 0.83%. In addition, GO-derived VO{sub x} composite semiconducting films, which have an sp{sup 3}/sp{sup 2} bonding ratio of 0.862, display thermally induced electrical switching properties in the temperature range of − 20 °C to 140 °C, with a transition temperature of approximately 65 °C. We ascribe these results to the use of GO sheets, which serve as a morphological growth template as well as an electrochemically tunable platform for enhancing the charge-carrier mobility. Moreover, the experimental studies demonstrate that graphene-based Magnéli-phase VO{sub x} composite semiconducting films can be used in advanced thermo-sensitive smart sensing/switching applications because of their outstanding thermo-electrodynamic properties and high surface charge density induced by the planar-type VNWs. - Highlights: • VO{sub x}-graphene oxide composite (G/VO{sub x}) films were fabricated by sol–gel process. • The G/VO{sub x} films mainly consisted of Magnéli-phase VO{sub 2} and reduced graphene sheets. • The G/VO{sub x} films exhibited multi-lamellar textures with planar VO{sub x} nanowire arrays. • The G/VO{sub x} films showed the thermo-sensitive electrical switching properties. • Effects of GOs on the electrical characteristics of the G/VO{sub x} films were discussed.

  12. Dehydrogenation of Isobutane with Carbon Dioxide over SBA-15-Supported Vanadium Oxide Catalysts

    Directory of Open Access Journals (Sweden)

    Chunling Wei

    2016-10-01

    Full Text Available A series of vanadia catalysts supported on SBA-15 (V/SBA with a vanadia (V content ranging from 1% to 11% were prepared by an incipient wetness method. Their catalytic behavior in the dehydrogenation of isobutane to isobutene with CO2 was examined. The catalysts were characterized by N2 adsorption, X-ray diffraction (XRD, scanning electron microscopy (SEM, Raman spectroscopy, and temperature-programmed reduction (TPR. It was found that these catalysts were effective for the dehydrogenation reaction, and the catalytic activity is correlated with the amount of dispersed vanadium species on the SBA-15 support. The 7% V/SBA catalyst shows the highest activity, which gives 40.8% isobutane conversion and 84.8% isobutene selectivity. The SBA-15-supported vanadia exhibits higher isobutane conversion and isobutene selectivity than the MCM-41-supported one.

  13. Investigation of temperature dependence of muonic X-ray spectra structure in silicon and vanadium oxides

    International Nuclear Information System (INIS)

    Andreeff, A.; Evseev, V.S.; Minkova, A.; Ortlepp, H.-G.; Roganov, V.S.; Rybakov, V.N.; Sabirov, B.M.; Fromm, W.

    1979-01-01

    To study the influence of matter macroscopic properties on the negative muon atomic capture the muonic X-ray spectra have been measured from silicon at 77 deg and 295 deg, from VO 2 at 295 deg and 355 deg, and from V 2 O 3 at 77 deg and 295 deg using a Ge(Li) spectrometer 55 cm 3 in volume and ''on-line'' technique. It is shown that neither changes of a conductivity in all targets, nor a rebuilding of both vanadium oxydes crystal structure at phase transition does not cause any alteration in muonic X-ray spectrum. The obtained results are discussed in terms of a ''time pit''

  14. Metal- versus Ligand-Centered Oxidations in Phenolato-Vanadium and -Cobalt Complexes: Characterization of Phenoxyl-Cobalt(III) Species.

    Science.gov (United States)

    Sokolowski, Achim; Adam, Britta; Weyhermüller, Thomas; Kikuchi, Akihiro; Hildenbrand, Knut; Schnepf, Robert; Hildebrandt, Peter; Bill, Eckhard; Wieghardt, Karl

    1997-08-13

    The coordination chemistry of the pendent-arm macrocycles 1,4,7-tris(3,5-dimethyl-2-hydroxybenzyl)-1,4,7-triazacyclononane, L(Me)H(3), 1,4,7-tris(3,5-di-tert-butyl-2-hydroxybenzyl)-1,4,7-triazacyclononane, L(Bu)H(3), 1,4,7-tris(3-tert-butyl-5-methoxy-2-hydroxybenzyl)-1,4,7-triazacyclononane, L(OCH)()3H(3), and Tolman's ligand 1,4-diisopropyl-7-(3,5-di-tert-butyl-2-hydroxybenzyl)-1,4,7-triazacyclononane, L(Pr)H, with vanadium and cobalt(III) has been studied. The following complexes containing a fac-N(3)O(3) donor set have been synthesized: [L(Me)V(III)] (1), [L(Me)V(IV)]PF(6) (2), [(L(Me)H)V(V)(O)]PF(6) (3), [L(Bu)V(IV)]PF(6) (4), [L(OCH)()3V(IV)]PF(6) (5), [L(Me)Co(III)] (6), [L(Bu)Co(III)] (7), [L(OCH)()3Co(III)] (8). In addition, two complexes containing the L(Pr)Co(III) fragment have been prepared: [L(Pr)Co(III)(acac)](ClO(4)) (9) and [L(Pr)Co(III)(Cl(4)cat)].CH(3)CN (10), where acac(-) represents the ligand pentane-2,4-dionate and Cl(4)cat(2)(-) is tetrachlorocatecholate. Complexes 9 and 10 have been characterized by single-crystal X-ray crystallography: 9 crystallizes in the triclinic space group P&onemacr; with a = 9.493(1) Å, b = 9.760(1) Å, c = 18.979(2) Å, alpha = 88.57(1) degrees, beta = 78.60(1) degrees, gamma = 79.24(1) degrees, V = 1693.3(3) Å(3), and Z = 2; 10 crystallizes in the monoclinic space group P2(1)/n with a = 10.184(2) Å, b = 24.860(5) Å, c = 14.872(3) Å, beta = 97.95(3) degrees, V = 3729(1) Å(3), and Z = 4. Electrochemically, complexes 2, 4, and 5 can be reversibly oxidized by one electron, yielding vanadium(V), and one-electron-reduced, affording vanadium(III) species; 3 can be reduced to [L(Me)HV(IV)(O)]. These redox processes are shown to be metal-centered. In contrast, the cyclic voltammograms of 7 and 8 display three reversible one-electron oxidations. For the monocations [7](*)(+) and [8](*)(+), EPR and UV-vis spectroscopies reveal that these are phenoxyl-cobalt(III) species. Thus, the redox processes are ligand

  15. Gas-phase reactions of cationic vanadium-phosphorus oxide clusters with C2H(x) (x=4, 6): a DFT-based analysis of reactivity patterns.

    Science.gov (United States)

    Dietl, Nicolas; Zhang, Xinhao; van der Linde, Christian; Beyer, Martin K; Schlangen, Maria; Schwarz, Helmut

    2013-02-25

    The reactivities of the adamantane-like heteronuclear vanadium-phosphorus oxygen cluster ions [V(x)P(4-x)O(10)](.+) (x=0, 2-4) towards hydrocarbons strongly depend on the V/P ratio of the clusters. Possible mechanisms for the gas-phase reactions of these heteronuclear cations with ethene and ethane have been elucidated by means of DFT-based calculations; homolytic C-H bond activation constitutes the initial step, and for all systems the P-O(.) unit of the clusters serves as the reactive site. More complex oxidation processes, such as oxygen-atom transfer to, or oxidative dehydrogenation of the hydrocarbons require the presence of a vanadium atom to provide the electronic prerequisites which are necessary to bring about the 2e(-) reduction of the cationic clusters. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Gas-Phase Reactions of Cationic Vanadium-Phosphorus Oxide Clusters with C2Hx (x=4, 6): A DFT-Based Analysis of Reactivity Patterns

    Science.gov (United States)

    Dietl, Nicolas; Zhang, Xinhao; van der Linde, Christian; Beyer, Martin K; Schlangen, Maria; Schwarz, Helmut

    2013-01-01

    The reactivities of the adamantane-like heteronuclear vanadium-phosphorus oxygen cluster ions [VxP4−xO10].+ (x=0, 2–4) towards hydrocarbons strongly depend on the V/P ratio of the clusters. Possible mechanisms for the gas-phase reactions of these heteronuclear cations with ethene and ethane have been elucidated by means of DFT-based calculations; homolytic C–H bond activation constitutes the initial step, and for all systems the P–O. unit of the clusters serves as the reactive site. More complex oxidation processes, such as oxygen-atom transfer to, or oxidative dehydrogenation of the hydrocarbons require the presence of a vanadium atom to provide the electronic prerequisites which are necessary to bring about the 2e− reduction of the cationic clusters. PMID:23322620

  17. Electro-optical evaluation of tungsten oxide and vanadium pentoxide thin films for modeling an electrochromic device

    Directory of Open Access Journals (Sweden)

    H Najafi Ashtiani

    2015-01-01

    Full Text Available In this study, tungsten oxide and vanadium oxide electrochromic thin films were placed in vacuum and in a thickness of 200 nm on a transparent conductive substrate of SnO2:F using the physical method of thermal evaporation. Then they were studied for the optical characteristics in the wavelength range from 400 to 700 nm and for their electrical potentials in the range form +1.5 to -1.5 volts. The films were post heated in order to assess changes in energy gap with temperature, at temperatures120 , 300 and 500°C. Refractive and extinction coefficients and the transition type of films in the visible light range and in the thickness of 200 nm were determined and measured. X-ray diffraction pattern and SEM images and cyclic Voltammetry of layers were also studied. The results of this study due to the deposition of layers, the layer thickness selected, the type of substrate, the range of annealing temperatures and selected electrolyte were in full compliance with the works of other researchers [1,2,3]. Therefore, these layers with features such as crystal structure, refractive and even extinction coefficients in the range of visible light, the appropriate response of chromic switch in the replication potential, good adhesion to the substrate, and the high amount of optical transmition and so on, prove useful to be used in an electrochromic device

  18. Fine-tuning optical and electronic properties of graphene oxide for highly efficient perovskite solar cells

    Science.gov (United States)

    Liu, Tongfa; Kim, Dongcheon; Han, Hongwei; Mohd Yusoff, Abd. Rashid Bin; Jang, Jin

    2015-06-01

    Simplifying the process of fine-tuning the electronic and optical properties of graphene oxide (GO) is of importance in order to fully utilize it as the hole interfacial layer (HIL). We introduced silver trifluoromethanesulfonate (AgOTf), an inorganic chemical dopant, that tunes and controls the properties of single-layered GO films synthesized by chemical vapor deposition. The morphology, work function, mobility, sheet resistance, and transmittance of the GO film were systematically tuned by various doping concentrations. We further developed a solution-processable low-temperature hole interfacial layer (HIL) poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS):AgOTf-doped GO HIL in highly efficient perovskite solar cells. The PEDOT:PSS:AgOTf-doped GO HIL grants the desirable charge-collection in the HIL allowing the entire device to be prepared at temperatures less than 120 °C. The fabricated perovskite solar cells utilize a rigid substrate and demonstrate compelling photovoltaic performance with a power conversion efficiency (PCE) of 11.90%. Moreover, flexible devices prepared using a polyethylene terephthalate (PET)/ITO demonstrate a PCE of 9.67%, while ITO-free flexible devices adopting PET/aluminum doped zinc oxide (AZO)/silver (Ag)/AZO demonstrate a PCE of 7.97%. This study shows that the PEDOT:PSS:AgOTf-doped GO HIL has significant potential to contribute to the development of low-cost solar cells.

  19. Protective effects of vanadium against DMH-induced genotoxicity and carcinogenesis in rat colon: removal of O(6)-methylguanine DNA adducts, p53 expression, inducible nitric oxide synthase downregulation and apoptotic induction.

    Science.gov (United States)

    Samanta, Shaonly; Swamy, Viswanath; Suresh, D; Rajkumar, M; Rana, Basabi; Rana, Ajay; Chatterjee, Malay

    2008-02-29

    Previous studies have shown that dietary micronutrient vanadium can protect neoplastic development induced by chemical carcinogens. Current investigation is an attempt to evaluate the role of vanadium (4.27 micro mol/l) in inhibiting 1,2 dimethyhydrazine (DMH) (20 mg/kg body weight) induced rat colon carcinogenesis. We investigated the effect of vanadium against the formation of DMH-induced O(6)-methylguanine (O(6)-Meg) DNA adduct, a potent cytotoxic and mutagenic agent for colon cancer. Supplementation of vanadium significantly reduced the hepatic (Pvanadium's potency in limiting the initiation event of colon carcinogenesis. Removal of initiated and damaged precancerous cells by apoptosis can prevent tumorigenesis and further malignancy. DNA fragmentation study revealed the vanadium-mediated apoptotic induction in colon tumors. The increased value of apoptotic index (AI) (62.27%; Pvanadium. This paralleled the nuclear immunoexpression of p53. A significant positive correlation between p53 immunoexpression and AI (P=0.0026, r=0.83, r(2)=0.69) links its association with vanadium-mediated apoptotic induction. Vanadium treatment also abated the mRNA expression of iNOS (54.03%), reflecting its protective effect against nitric oxide-mediated genotoxicity and colon tumorigenesis. These studies cumulatively provide strong evidence for the inhibitory actions of vanadium against DMH-induced genotoxicity and carcinogenesis in rat colon.

  20. Amorphous vanadium oxide matrixes supporting hierarchical porous Fe3O4/graphene nanowires as a high-rate lithium storage anode.

    Science.gov (United States)

    An, Qinyou; Lv, Fan; Liu, Qiuqi; Han, Chunhua; Zhao, Kangning; Sheng, Jinzhi; Wei, Qiulong; Yan, Mengyu; Mai, Liqiang

    2014-11-12

    Developing electrode materials with both high energy and power densities holds the key for satisfying the urgent demand of energy storage worldwide. In order to realize the fast and efficient transport of ions/electrons and the stable structure during the charge/discharge process, hierarchical porous Fe3O4/graphene nanowires supported by amorphous vanadium oxide matrixes have been rationally synthesized through a facile phase separation process. The porous structure is directly in situ constructed from the FeVO4·1.1H2O@graphene nanowires along with the crystallization of Fe3O4 and the amorphization of vanadium oxide without using any hard templates. The hierarchical porous Fe3O4/VOx/graphene nanowires exhibit a high Coulombic efficiency and outstanding reversible specific capacity (1146 mAh g(-1)). Even at the high current density of 5 A g(-1), the porous nanowires maintain a reversible capacity of ∼500 mAh g(-1). Moreover, the amorphization and conversion reactions between Fe and Fe3O4 of the hierarchical porous Fe3O4/VOx/graphene nanowires were also investigated by in situ X-ray diffraction and X-ray photoelectron spectroscopy. Our work demonstrates that the amorphous vanadium oxides matrixes supporting hierarchical porous Fe3O4/graphene nanowires are one of the most attractive anodes in energy storage applications.

  1. Selective nano alumina supported vanadium oxide catalysts for oxidative dehydrogenation of ethylbenzene to styrene using CO2 as soft oxidant

    Directory of Open Access Journals (Sweden)

    A.M. Elfadly

    2013-12-01

    Full Text Available Nano alumina-supported V2O5 catalysts with different loadings have been tested for the dehydrogenation of ethylbenzene with CO2 as an oxidant. High surface area nano-alumina was prepared and used as support for V2O5 as the catalyst. The catalysts were synthesized by impregnation techniques followed by calcinations and microwave treatment, denoted as V2O5/γ-Al2O3-C and V2O5/γ-Al2O3-MW, respectively. The V2O5 loading was varied on nano-alumina from 5 to 30 wt%. The support and catalysts were characterized by X-ray diffraction (XRD, Barett–Joyner–Halenda (BJH pore-size distribution, N2-adsorption isotherms, Fourier transform infrared (FT-IR, scanning electron microscopy (SEM, transmission electron microscopy (TEM and temperature programed desorption (TPD-NH3. The characterization results indicated that V2O5 is highly dispersed on alumina up to 30%-V2O5/γ-Al2O3-MW prepared by MW method. The TPD studies indicated that there are significant differences in acid amount and strength for V2O5/γ-Al2O3-C and V2O5/γ-Al2O3-MW-catalysts. The catalytic activity of the prepared catalysts was evaluated in the temperature range 450–600 °C in relation to the physicochemical properties and surface acidity. The results revealed that optimum catalytic activity and selectivity (∼100% toward styrene production were obtained using 10% V2O5/γ-Al2O3-MW catalyst treated with microwave.

  2. The ion dependent change in the mechanism of charge storage of chemically preintercalated bilayered vanadium oxide electrodes

    Science.gov (United States)

    Clites, Mallory; Pomerantseva, Ekaterina

    2017-08-01

    Chemical pre-intercalation is a soft chemistry synthesis approach that allows for the insertion of inorganic ions into the interlayer space of layered battery electrode materials prior to electrochemical cycling. Previously, we have demonstrated that chemical pre-intercalation of Na+ ions into the structure of bilayered vanadium oxide (δ-V2O5) results in record high initial capacities above 350 mAh g-1 in Na-ion cells. This performance is attributed to the expanded interlayer spacing and predefined diffusion pathways achieved by the insertion of charge-carrying ions. However, the effect of chemical pre-intercalation of δ-V2O5 has not been studied for other ion-based systems beyond sodium. In this work, we report the effect of the chemically preintercalated alkali ion size on the mechanism of charge storage of δ- MxV2O5 (M = Li, Na, K) in Li-ion, Na-ion, and K-ion batteries, respectively. The interlayer spacing of the δ-MxV2O5 varied depending on inserted ion, with 11.1 Å achieved for Li-preintercalated δ-V2O5, 11.4 Å for Na-preintercalated δ- V2O5, and 9.6 Å for K-preintercalated δ-V2O5. Electrochemical performance of each material has been studied in its respective ion-based system (δ-LixV2O5 in Li-ion cells, δ-NaxV2O5 in Na-ion cells, and δ-KxV2O5 in K-ion cells). All materials demonstrated high initial capacities above 200 mAh g-1. However, the mechanism of charge storage differed depending on the charge-carrying ion, with Li-ion cells demonstrating predominantly pseudocapacitive behavior and Naion and K-ion cells demonstrating a significant portion of capacity from diffusion-limited intercalation processes. In this study, the combination of increased ionic radii of the charge-carrying ions and decreased synthesized interlayer spacing of the bilayered vanadium oxide phase correlates to an increase in the portion of capacity attributed diffusion-limited charge-storage processes.

  3. (51)V solid-state NMR and density functional theory studies of eight-coordinate non-oxo vanadium complexes: oxidized amavadin.

    Science.gov (United States)

    Ooms, Kristopher J; Bolte, Stephanie E; Baruah, Bharat; Choudhary, Muhammad Aziz; Crans, Debbie C; Polenova, Tatyana

    2009-05-07

    Using (51)V magic angle spinning solid-state NMR spectroscopy and density functional theory calculations we have characterized the chemical shift and quadrupolar coupling parameters for two eight-coordinate vanadium complexes, [PPh(4)][V(v)(HIDPA)(2)] and [PPh(4)][V(v)(HIDA)(2)]; HIDPA = 2,2'-(hydroxyimino)dipropionate and HIDA = 2,2'-(hydroxyimino)diacetate. The coordination geometry under examination is the less common non-oxo eight coordinate distorted dodecahedral geometry that has not been previously investigated by solid-state NMR spectroscopy. Both complexes were isolated by oxidizing their reduced forms: [V(iv)(HIDPA)(2)](2-) and [V(iv)(HIDA)(2)](2-). V(iv)(HIDPA)(2)(2-) is also known as amavadin, a vanadium-containing natural product present in the Amanita muscaria mushroom and is responsible for vanadium accumulation in nature. The quadrupolar coupling constants, C(Q), are found to be moderate, 5.0-6.4 MHz while the chemical shift anisotropies are relatively small for vanadium complexes, -420 and -360 ppm. The isotropic chemical shifts in the solid state are -220 and -228 ppm for the two compounds, and near the chemical shifts observed in solution. Presumably this is a consequence of the combined effects of the increased coordination number and the absence of oxo groups. Density functional theory calculations of the electric field gradient parameters are in good agreement with the NMR results while the chemical shift parameters show some deviation from the experimental values. Future work on this unusual coordination geometry and a combined analysis by solid-state NMR and density functional theory should provide a better understanding of the correlations between experimental NMR parameters and the local structure of the vanadium centers.

  4. Role of ERK/NFκB in vanadium (IV) oxide mediated osteoblast differentiation in C3H10t1/2 cells.

    Science.gov (United States)

    Srivastava, Swati; Kumar, Narender; Roy, Partha

    2014-06-01

    Vanadium (V) compounds are reported to have insulin mimicking action, which render them to show excellent osteogenic activity. In the current study we investigated the effect of various vanadium compounds on osteoblast differentiation of mouse mesenchymal stem cells, C3H10t1/2 cells, and analyzed the underlying mechanism of vanadium for this action. Our data showed that treatment of C3H10t1/2 cells with V (IV) oxide complex (at 7-25 μM concentrations) induced osteoblast differentiation maximally as compared to V2O5. On the other hand, ammonium vanadate was found to dampen the osteoblast differentiation process. Based on this data, V (IV) oxide was investigated further to analyze its probable mode of action as an osteoblastic agent. The key factors implicated in osteoblast differentiation i.e., NFκB, ERK ½, AP1 and CRE were examined in response to V (IV) oxide exposure. Exposure to V (IV) oxide caused 2- and 5-folds induction of luciferase activities in cells transfected with SRE-luc and NFκB-luc reporter vectors respectively (p oxide enhanced the phosphorylation of ERK ½, IκB and NFκBp65 proteins. In addition, RT-PCR analysis, alizarin red staining and immunoblot analysis showed that inhibition of osteoblast differentiation in presence of PD98059 and parthenolide (inhibitors of ERK and NFκB pathways respectively) was rescued in presence of V (IV) oxide. These results suggest that V (IV) oxide up regulates osteoblast differentiation through ERK and NFκB pathways and hence could be utilized as an agent for bone formation after further analysis and validation. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  5. Study of the performance of vanadium based catalysts prepared by grafting in the oxidative dehydrogenation of propane

    Energy Technology Data Exchange (ETDEWEB)

    Santacesaria, E.; Carotenuto, G.; Tesser, R.; Di Serio, M. [Naples Univ. (Italy). Dept. of Chemistry

    2011-07-01

    The oxidative dehydrogenation (ODH) of propane has been investigated by using many different vanadia based catalysts, prepared by grafting technique and containing variable amounts of active phase supported on SiO{sub 2} previously coated, by grafting in three different steps, with multilayer of TiO{sub 2}. A depth catalytic screening, conducted in a temperature range of 400-600 C, at atmospheric pressure and in a range of residence time W/F=0.08-0.33 ghmol{sub -1}, has shown that the vanadium oxide catalysts on TiO{sub 2}-SiO{sub 2} support, prepared by grafting have good performances in the ODH of propane. In particular, a preliminary study has demonstrated that higher selectivities can be obtained employing catalysts having a well dispersed active phase that can be achieved with a V{sub 2}O{sub 5} content lower than 10%{sub w}t. It is well known that, in the case of redox catalysts, an increase of the selectivity can be achieved not only by using an adequate catalytic system but also via engineering routes like decoupling catalytic steps of reduction and re-oxidation. In fact it has been observed that by operating in dehydrogenating mode, on the same catalysts, a higher selectivity is obtained although the catalyst is poisoned by the formation of coke on the surface. As consequence of the results obtained in dehydrogenation, in this work has been explored the possibility to feed low amounts of oxygen, below the stoichiometric level with the aim to keep clean the surface from coke but maintaining high the selectivity, because, dehydrogenation reaction prevails. In this work, the behavior of catalysts containing different amounts of V2O5 has been studied in the propane-propene reaction by using different ratios C{sub 3}H{sub 8}/O{sub 2} included in the range 0-2. (orig.)

  6. Vanadium and affective disorders

    International Nuclear Information System (INIS)

    Naylor, G.J.

    1985-01-01

    The oxidation reduction state of vanadium will influence its inhibitory effect, and it has been suggested that the control of this oxidation reduction could be a physiological means of controlling Na-K ATPase and hence membrane transport. However, there is no general agreement on this. For such a hypothesis to be true, tissue concentrations of vanadium would need to be sufficient to cause inhibition of Na-K ATPase. There has been considerable variation in the concentration of vanadium reported to be present in human blood and plasma - e.g., 8.4 μmoleliter, 0.11 μmoleliter, 0.04 μmoleliter and 0.0006-0.018 μmliter. Methods of assay have varied, even including enzymic methods, but the two major methods now used are neutron activation analysis and atomic absorption spectrophotometry using an electrical flameless atomizer. Using neutron activation analysis, difficulties arise from the short half-ife of V 52 (3.76 min) and for the need to separate Na 24 and Cl 36 from the sample since their radiation interfere with those from V 52 . Results from preirradiation separation agree well with those from atomic absorption spectrophotometry, but those from postirradiation separation are usually much lower. Though there is no agreement on the physiological role of vanadium there is evidence that it plays a part in the etiology of manic-depressive psychosis

  7. Light irradiation tuning of surface wettability, optical, and electric properties of graphene oxide thin films

    Science.gov (United States)

    Furio, A.; Landi, G.; Altavilla, C.; Sofia, D.; Iannace, S.; Sorrentino, A.; Neitzert, H. C.

    2017-02-01

    In this work the preparation of flexible polymeric films with controlled electrical conductivity, light transmission and surface wettability is reported. A drop casted graphene oxide thin film is photo-reduced at different levels by UV light or laser irradiation. Optical microscopy, IR spectroscopy, electrical characterization, Raman spectroscopy and static water contact angle measurements are used in order to characterize the effects of the various reduction methods. Correlations between the optical, electrical and structural properties are reported and compared to previous literature results. These correlations provide a useful tool for independently tuning the properties of these films for specific applications.

  8. Influence of oxygen flow rate on metal-insulator transition of vanadium oxide thin films grown by RF magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xu; Liu, Xinkun; Li, Haizhu; Huang, Mingju [Henan University, Key Lab of Informational Opto-Electronical Materials and Apparatus, School of Physics and Electronics, Kaifeng (China); Zhang, Angran [South China Normal University, Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, Guangzhou (China)

    2017-03-15

    High-quality vanadium oxide (VO{sub 2}) films have been fabricated on Si (111) substrates by radio frequency (RF) magnetron sputtering deposition method. The sheet resistance of VO{sub 2} has a significant change (close to 5 orders of magnitude) in the process of the metal-insulator phase transition (MIT). The field emission-scanning electron microscope (FE-SEM) results show the grain size of VO{sub 2} thin films is larger with the increase of oxygen flow. The X-ray diffraction (XRD) results indicate the thin films fabricated at different oxygen flow rates grow along the (011) crystalline orientation. As the oxygen flow rate increases from 3 sccm to 6 sccm, the phase transition temperature of the films reduces from 341 to 320 K, the width of the thermal hysteresis loop decreases from 32 to 9 K. The thin films fabricated in the condition of 5 sccm have a high temperature coefficient of resistance (TCR) -3.455%/K with a small resistivity of 2.795 ρ/Ω cm. (orig.)

  9. Structural and electrical properties of different vanadium oxide phases in thin film form synthesized using pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Majid, S. S., E-mail: suhailphy276@gmail.com; Rahman, F. [Department of Physics, Aligarh Muslim University, Aligarh-202002 (India); Shukla, D. K.; Choudhary, R. J.; Phase, D. M. [UGC-DAE Consortium for Scientific Research, Indore-452001 (India)

    2015-06-24

    We present here the structural and electrical properties of the thin films of V{sub 2}O{sub 3} (Vanadium sesquioxide) and V{sub 5}O{sub 9}. Both these oxide phases, V{sub 2}O{sub 3} and V{sub 5}O{sub 9}, have beenachieved on (001) orientedSi substrate using the V{sub 2}O{sub 5} target by optimizing the deposition parameters using pulsed laser deposition technique (PLD).Deposited films were characterized by X-ray diffraction(XRD)and four probe temperature dependent resistivity measurements. XRD studies reveal the V{sub 2}O{sub 3} and V{sub 5}O{sub 9} phases and the amount of strain present in both these films. The temperature dependency of electrical resistivity confirmed the characteristic metal-insulator transitions (MIT) for both the films, V{sub 2}O{sub 3} and V{sub 5}O{sub 9}.

  10. Mixed phase titania nanocomposite codoped with metallic silver and vanadium oxide: new efficient photocatalyst for dye degradation.

    Science.gov (United States)

    Yang, Xia; Ma, Fengyan; Li, Kexin; Guo, Yingna; Hu, Jianglei; Li, Wei; Huo, Mingxin; Guo, Yihang

    2010-03-15

    Titania nanocomposite codoped with metallic silver and vanadium oxide was prepared by a one-step sol-gel-solvothermal method in the presence of a triblock copolymer surfactant (P123). The resulting Ag/V-TiO(2) three-component junction system exhibited an anatase/rutile (weight ratio of 73.8:26.2) mixed phase structure, narrower band gap (2.25 eV), and extremely small particle sizes (ca. 12 nm) with metallic Ag particles well distributed on the surface of the composite. The Ag/V-TiO(2) nanocomposite was used as the visible- and UV-light-driven photocatalyst to degrade dyes rhodamine B (RB) and coomassie brilliant blue G-250 (CBB) in an aqueous solution. At 1.8% Ag and 4.9% V doping, the Ag/V-TiO(2) system exhibited the highest visible- as well as UV-light photocatalytic activity; additionally, the activity of the three-component system exceeded that of Degussa P25, pure TiO(2), single-doped TiO(2) system (Ag/TiO(2) or V-TiO(2)) as well as P123-free-Ag/V-TiO(2) codoped system. The reasons for this enhanced photocatalytic activity were revealed. (c) 2009 Elsevier B.V. All rights reserved.

  11. Vanadium Oxide Supported on MSU-1 as a Highly Active Catalyst for Dehydrogenation of Isobutane with CO2

    Directory of Open Access Journals (Sweden)

    Guosong Sun

    2016-03-01

    Full Text Available Vanadium oxide supported on MSU-1, with VOx loading ranging from 2.5 to 17.5 wt. %, was developed as a highly active catalyst in dehydrogenation of isobutane with CO2. The obtained catalysts of VOx/MSU-1 were characterized by X-ray diffraction (XRD, N2 adsorption-desorption, and H2-temperature programmed reduction (H2-TPR methods and the results showed that the large surface area of MSU-1 was favorable for the dispersion of VOx species and the optimal loading of VOx was 12.0 wt. %. Meanwhile, the catalytic activity of VOx/MSU-1 was investigated, and VOx/MSU-1 with 12.0 wt. % VOx content was found to be the best one, with the conversion of isobutane (58.8% and the selectivity of isobutene (78.5% under the optimal reaction conditions. In contrast with the reaction in the absence of CO2, the presence of CO2 in the reaction stream could obviously enhance the isobutane dehydrogenation, which raised the conversion of reaction and the stability of VOx/MSU-1.

  12. Novel synthesis of manganese and vanadium mixed oxide (V2O5/OMS-2) as an efficient and selective catalyst for the oxidation of alcohols in liquid phase

    International Nuclear Information System (INIS)

    Mahdavi, Vahid; Soleimani, Shima

    2014-01-01

    Graphical abstract: Oxidation of various alcohols is studied in the liquid phase over new composite mixed oxide (V 2 O 5 /OMS-2) catalyst using tert-butyl hydroperoxide (TBHP). The activity of V 2 O 5 /OMS-2 samples was considerably increased with respect to OMS-2 catalyst and these samples are found to be suitable for the selective oxidation of alcohols. - Highlights: • V 2 O 5 /K-OMS-2 with different V/Mn molar ratios prepared by the impregnation method. • Oxidation of alcohols was studied in the liquid phase over V 2 O 5 /K-OMS-2 catalyst. • V 2 O 5 /K-OMS-2 catalyst had excellent activity for alcohol oxidation. • Benzyl alcohol oxidation using excess TBHP followed a pseudo-first order kinetic. • The selected catalyst was reused without significant loss of activity. - Abstract: This work reports the synthesis and characterization of mixed oxide vanadium–manganese V 2 O 5 /K-OMS-2 at various V/Mn molar ratios and prepared by the impregnation method. Characterization of these new composite materials was made by elemental analysis, BET, XRD, FT-IR, SEM and TEM techniques. Results of these analyses showed that vanadium impregnated samples contained mixed phases of cryptomelane and crystalline V 2 O 5 species. Oxidation of various alcohols was studied in the liquid phase over the V 2 O 5 /K-OMS-2 catalyst using tert-butyl hydroperoxide (TBHP) and H 2 O 2 as the oxidant. Activity of the V 2 O 5 /K-OMS-2 samples was increased considerably with respect to K-OMS-2 catalyst due to the interaction of manganese oxide and V 2 O 5 . The kinetic of benzyl alcohol oxidation using excess TBHP over V 2 O 5 /K-OMS-2 catalyst was investigated at different temperatures and a pseudo-first order reaction was determined with respect to benzyl alcohol. The effects of reaction time, oxidant/alcohol molar ratio, reaction temperature, solvents, catalyst recycling potential and leaching were investigated

  13. A novel octanuclear vanadium(V) oxide cluster complex having an unprecedented neutral V8O20 core functionalized with 4,4'-di-tert-butyl-2,2'-bipyridine.

    Science.gov (United States)

    Kodama, Shintaro; Taya, Nobuto; Ishii, Youichi

    2014-03-17

    A novel octanuclear vanadium(V) oxide cluster complex, [V8O20(4,4'-(t)Bubpy)4] (1), was synthesized and characterized by single-crystal X-ray structure analysis to reveal that 1 has an unprecedented neutral V8O20 core. An unexpected interconversion between 1 and the methoxo(oxo)vanadium(V) cluster complex, [V4O8(OMe)4(4,4'-(t)Bubpy)2] (2), was observed upon changes in the solvent systems.

  14. Employing of thermal lens spectroscopy in kinetic methods of analyses: oxidation of aniline by bromate ions catalysed by vanadium(5) ions

    International Nuclear Information System (INIS)

    Kuznetsova, V.V.; Proskurin, M.A.; Ragozina, N.Yu.; Pakhomova, S.V.

    2000-01-01

    Metrological characteristics of spectrophotometric determination of vanadium by its catalytic activity in reaction of aniline oxidation by bromate-ions in acid medium in the presence of 8-hydroxyquinoline (pyrocatechol) as activator were determined: determination limits are 3 · 10 -8 M (1 · 10 -7 M) and minimal value of root-mean-square deviation is 0.03 (0.04). Determination limits of both activators made up n · 10 -4 M. Employment of thermal of vanadium(5) by two orders and those of the activators - by an order. The ranges of contents determined by the relevant spectrophotometric and thermal lens methods overlap permitting determination of the compounds mentioned in a summary range up to five orders [ru

  15. Novel acid-base hybrid membrane based on amine-functionalized reduced graphene oxide and sulfonated polyimide for vanadium redox flow battery

    International Nuclear Information System (INIS)

    Cao, Li; Sun, Qingqing; Gao, Yahui; Liu, Luntao; Shi, Haifeng

    2015-01-01

    A series of novel acid-base hybrid membranes (SPI/PEI-rGO) based on sulfonated polyimide (SPI) with polyethyleneimine-functionalized reduced graphene oxide (PEI-rGO) are prepared by a solution-casting method for vanadium redox flow battery (VRB). FT-IR and XPS results prove the successful fabrication of PEI-rGO and SPI/PEI-rGO hybrid membranes, which show a dense and homogeneous structure observed by SEM. The physicochemical properties such as water uptake, swelling ratio, ion exchange capacity, proton conductivity and vanadium ion permeability are well controlled by the incorporated PEI-rGO fillers. The interfacial-formed acid-base pairs between PEI-rGO and SPI matrix effectively reduce the swelling ratio and vanadium ion permeability, increasing the stability performance of the hybrid membranes. SPI/PEI-rGO-2 hybrid membrane exhibits a higher coulombic efficiency (CE, 95%) and energy efficiency (EE, 75.6%) at 40 mA cm −2 , as compared with Nafion 117 membrane (CE, 91% and EE, 66.8%). The self-discharge time of the VRB with SPI/PEI-rGO-2 hybrid membrane (80 h) is longer than that of Nafion 117 membrane (26 h), demonstrating the excellent blocking ability for vanadium ion. After 100 charge-discharge cycles, SPI/PEI-rGO-2 membrane exhibits the good stability under strong oxidizing and acid condition, proving that SPI/PEI-rGO acid-base hybrid membranes could be used as the promising candidates for VRB applications

  16. Fabrication of polypyrrole/vanadium oxide nanotube composite with enhanced electrochemical performance as cathode in rechargeable batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Xiaowei, E-mail: zhouxiaowei@ynu.edu.cn [Department of Physics, School of Physics and Astronomy, Yunnan University, Kunming 650504, Yunnan (China); Chen, Xu; He, Taoling; Bi, Qinsong [Department of Physics, School of Physics and Astronomy, Yunnan University, Kunming 650504, Yunnan (China); Sun, Li [Department of Physics, School of Physics and Astronomy, Yunnan University, Kunming 650504, Yunnan (China); Department of Mechanical Engineering, University of Houston, Houston 77204, TX (United States); Liu, Zhu, E-mail: zhuliu@ynu.edu.cn [Department of Physics, School of Physics and Astronomy, Yunnan University, Kunming 650504, Yunnan (China); Yunnan Key Laboratory of Micro/Nano-Materials and Technology, Yunnan University, Kunming 650091, Yunnan (China)

    2017-05-31

    Highlights: • VO{sub x}NTs were hydrothermally prepared using C{sub 12}H{sub 27}N as soft template with scalability. • Polypyrrole/VO{sub x}NTs with less C{sub 12}H{sub 27}N template and higher conductivity were obtained. • Polypyrrole/VO{sub x}NTs exhibit better performance as cathode for LIBs compared to VO{sub x}NTs. • Further modification to VO{sub x}NTs with desired electrochemical property can be expected. - Abstract: Vanadium oxide nanotubes (VO{sub x}NTs) with hollow as well as multi-walled features were fabricated under hydrothermal condition by soft-template method. This novel VO{sub x}NTs can be used as cathode material for lithium ion batteries (LIBs), but displaying low specific capacity and poor cycling performance owing to the residual of a mass of soft-template (C{sub 12}H{sub 27}N) and intrinsic low conductivity of VO{sub x}. Cation exchange technique and oxidative polymerization process of pyrrole monomers were conducted to wipe off partial soft-template without electrochemical activity within VO{sub x}NTs and simultaneously form polypyrrole coating on VO{sub x}NTs, respectively. The resulting polypyrrole/VO{sub x}NTs nanocomposite delivers much improved capacity and cyclic stability. Further optimizations, such as complete elimination of organic template and enhancing the crystallinity, can make this unique nanostructure a promising cathode for LIBs.

  17. Tuning of electrical and structural properties of indium oxide films grown by metal organic chemical vapor deposition

    International Nuclear Information System (INIS)

    Wang, Ch.Y.; Cimalla, V.; Romanus, H.; Kups, Th.; Niebelschuetz, M.; Ambacher, O.

    2007-01-01

    Tuning of structural and electrical properties of indium oxide (In 2 O 3 ) films by means of metal organic chemical vapor deposition is demonstrated. Phase selective growth of rhombohedral In 2 O 3 (0001) and body-centered cubic In 2 O 3 (001) polytypes on (0001) sapphire substrates was obtained by adjusting the substrate temperature and trimethylindium flow rate. The specific resistance of the as-grown films can be tuned by about two orders of magnitude by varying the growth conditions

  18. Oxidation-reduction phenomena in tabular uranium-vanadium bearing sandstone from the Salt Wash deposits (Upper Jurassic) of the Cottonwood Wash district (Utah, USA)

    International Nuclear Information System (INIS)

    Meunier, J.D.

    1984-02-01

    A braided to meandering fluvial environment has been postulated for this area after a sedimentological study. The mineralization is spatially related with conifer derived organic matter and wood is preserved in these sediments because of the reducing environment of deposition. The degree of maturation of the organic matter has been estimated from chemical analyses. Results show the presence of variable diagenetic oxidation depending on the environment. The organic matter which was least affected by this oxidation have attained a thermal maturation characteristic of the end stage of diagenesis. The high grade ore is situated at the edges of or within the trunks of trees (which remained permeable during diagenesis) and at the boundaries of the carbonaceous beds. Geochemical study shows there to be good correlation between uranium and vanadium. Uranium occurs as pitchblende, coffinite or as impregnations in the vanadiferous clay cement. A detailed study of clays shows an association of chlorite and roscoelite which most probably contain V 3+ . Fluid inclusion study suggests burying temperatures of >= 100 0 C and shows the existance of brines before the mineralization. The following genetical model is proposed. Low Eh uraniferous solutions move through a reduced pyritised environment. The low degree of oxidation of the pyrites propagates the destabilization of the clastic iron-titanium oxides which release vanadium and the dissociation of uranylcarbonates. Then, the deposit of pitchblende, coffinite, montroseite and vanadiferous clays took place in association with a secondary pyrite. When the rocks were uplifted to the subsurface, uranium (IV) and vanadium (III) were remobilised in an oxidising environment to form a secondary mineralization essentially represented by tyuyamunite [fr

  19. Melt quenched vanadium oxide embedded in graphene oxide sheets as composite electrodes for amperometric dopamine sensing and lithium ion battery applications

    Science.gov (United States)

    Sreejesh, M.; Shenoy, Sulakshana; Sridharan, Kishore; Kufian, D.; Arof, A. K.; Nagaraja, H. S.

    2017-07-01

    Electrochemical sensors and lithium-ion batteries are two important topics in electrochemistry that have attracted much attention owing to their extensive applications in enzyme-free biosensors and portable electronic devices. Herein, we report a simple hydrothermal approach for synthesizing composites of melt quenched vanadium oxide embedded on graphene oxide of equal proportion (MVGO50) for the fabrication of electrodes for nonenzymatic amperometic dopamine sensor and lithium-ion battery applications. The sensing performance of MVGO50 electrodes through chronoamperometry studies in 0.1 M PBS solution (at pH 7) over a wide range of dopamine concentration exhibited a highest sensitivity of 25.02 μA mM-1 cm-2 with the lowest detection limit of 0.07 μM. In addition, the selective sensing capability of MVGO50 was also tested through chronoamperometry studies by the addition of a very small concentration of dopamine (10 μM) in the presence of a fairly higher concentration of uric acid (10 mM) as the interfering species. Furthermore, the reversible lithium cycling properties of MVGO50 are evaluated by galvanostatic charge-discharge cycling studies. MVGO50 electrodes exhibited enhanced rate capacity of up to 200 mAhg-1 at a current of 0.1C rate and remained stable during cycling. These results indicate that MVGO composites are potential candidates for electrochemical device applications.

  20. Elementary steps of the catalytic NO(x) reduction with NH3: cluster studies on reactant adsorption at vanadium oxide substrate.

    Science.gov (United States)

    Gruber, M; Hermann, K

    2013-03-07

    Extended cluster models together with density-functional theory are used to evaluate geometric, energetic, and electronic properties of different adsorbate species that can occur at a vanadium oxide surface where the selective catalytic reduction (SCR) of NO in the presence of ammonia proceeds. Here, we focus on atomic hydrogen, nitrogen, and oxygen, as well as molecular NO and NHx, x = 1, 4, adsorption at a model V2O5(010) surface. Binding sites, oxygen and vanadium, at both the perfect and reduced surface are considered where reduction is modeled by (sub-) surface oxygen vacancies. The reactants are found to bind overall more strongly at oxygen vacancy sites of the reduced surface where they stabilize in positions formerly occupied by the oxygen (substitutional adsorption) compared with weaker binding at the perfect surface. In particular, ammonia, which interacts only weakly with vanadium at the perfect surface, binds quite strongly near surface oxygen vacancies. In contrast, surface binding of the NH4 adsorbate species differs only little between the perfect and the reduced surface which is explained by the dominantly electrostatic nature of the adsorbate interaction. The theoretical results are consistent with experimental findings and confirm the importance of surface reduction for the reactant adsorption forming elementary steps of the SCR process.

  1. Tuning the Electronic Structure of Titanium Oxide Support to Enhance the Electrochemical Activity of Platinum Nanoparticles

    KAUST Repository

    Shi, Feifei

    2013-09-11

    Two times higher activity and three times higher stability in methanol oxidation reaction, a 0.12 V negative shift of the CO oxidation peak potential, and a 0.07 V positive shift of the oxygen reaction potential compared to Pt nanoparticles on pristine TiO2 support were achieved by tuning the electronic structure of the titanium oxide support of Pt nanoparticle catalysts. This was accomplished by adding oxygen vacancies or doping with fluorine. Experimental trends are interpreted in the context of an electronic structure model, showing an improvement in electrochemical activity when the Fermi level of the support material in Pt/TiOx systems is close to the Pt Fermi level and the redox potential of the reaction. The present approach provides guidance for the selection of the support material of Pt/TiOx systems and may be applied to other metal-oxide support materials, thus having direct implications in the design and optimization of fuel cell catalyst supports. © 2013 American Chemical Society.

  2. Tuning the Synthesis of Manganese Oxides Nanoparticles for Efficient Oxidation of Benzyl Alcohol

    Science.gov (United States)

    Fei, Jingyuan; Sun, Lixian; Zhou, Cuifeng; Ling, Huajuan; Yan, Feng; Zhong, Xia; Lu, Yuxiang; Shi, Jeffrey; Huang, Jun; Liu, Zongwen

    2017-01-01

    The liquid phase oxidation of benzyl alcohol is an important reaction for generating benzaldehyde and benzoic acid that are largely required in the perfumery and pharmaceutical industries. The current production systems suffer from either low conversion or over oxidation. From the viewpoint of economy efficiency and environmental demand, we are aiming to develop new high-performance and cost-effective catalysts based on manganese oxides that can allow the green aerobic oxidation of benzyl alcohol under mild conditions. It was found that the composition of the precursors has significant influence on the structure formation and surface property of the manganese oxide nanoparticles. In addition, the crystallinity of the resulting manganese nanoparticles was gradually improved upon increasing the calcination temperature; however, the specific surface area decreased obviously due to pore structure damage at higher calcination temperature. The sample calcined at the optimal temperature of 600 °C from the precursors without porogen was a Mn3O4-rich material with a small amount of Mn2O3, which could generate a significant amount of {O}_2- species on the surface that contributed to the high catalytic activity in the oxidation. Adding porogen with precursors during the synthesis, the obtained catalysts were mainly Mn2O3 crystalline, which showed relatively low activity in the oxidation. All prepared samples showed high selectivity for benzaldehyde and benzoic acid. The obtained catalysts are comparable to the commercial OMS-2 catalyst. The synthesis-structure-catalysis interaction has been addressed, which will help for the design of new high-performance selective oxidation catalysts.

  3. Kinetics of oxidation of D-arabinose and D-xylose by vanadium (V in the presence of manganese II as homogeneous catalyst

    Directory of Open Access Journals (Sweden)

    Ezekiel O. Odebunmi

    2010-12-01

    Full Text Available Kinetics of oxidation of D-arabinose and D-xylose by acidic solution of vanadium (V ions in the presence of manganese (II has been reported. First-order dependence of the reaction rate was observed on [sugars] and [H+] at low concentrations throughout the oxidation reaction and a zero-order dependence on [sugar] and [H+] was observed at high concentrations. First-order kinetics with respect to [Mn (II] was also observed throughout the oxidation for both sugars. The results indicate the effect of Cl- concentration is negligible. The reaction rates increase with the ionic strength of the medium. Various activation parameters were evaluated and provide further support to the proposed mechanism. Formic acid was reported as one of the oxidation products of these sugars.

  4. Homogeneous Cobalt/Vanadium Complexes as Precursors for Functionalized Mixed Oxides in Visible-Light-Driven Water Oxidation.

    Science.gov (United States)

    Pavliuk, Mariia V; Mijangos, Edgar; Makhankova, Valeriya G; Kokozay, Vladimir N; Pullen, Sonja; Liu, Jia; Zhu, Jiefang; Styring, Stenbjörn; Thapper, Anders

    2016-10-20

    The heterometallic complexes (NH 4 ) 2 [Co(H 2 O) 6 ] 2 [V 10 O 28 ]⋅4 H 2 O (1) and (NH 4 ) 2 [Co(H 2 O) 5 (β-HAla)] 2 [V 10 O 28 ]⋅4 H 2 O (2) have been synthesized and used for the preparation of mixed oxides as catalysts for water oxidation. Thermal decomposition of 1 and 2 at relatively low temperatures (oxides CoV 2 O 6 /V 2 O 5 (3) and Co 2 V 2 O 7 /V 2 O 5 (4). The complexes (1, 2) and heterogeneous materials (3, 4) act as catalysts for photoinduced water oxidation. A modification of the thermal decomposition procedure allowed the deposition of mixed metal oxides (MMO) on a mesoporous TiO 2 film. The electrodes containing Co/V MMOs in TiO 2 films were used for electrocatalytic water oxidation and showed good stability and sustained anodic currents of about 5 mA cm -2 at 1.72 V versus relative hydrogen electrode (RHE). This method of functionalizing TiO 2 films with MMOs at relatively low temperatures (oxides with different functionality for applications in, for example, artificial photosynthesis. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Vanadium and molybdenum oxide thin films on Au(111). Growth and surface characterization

    Energy Technology Data Exchange (ETDEWEB)

    Guimond, Sebastien

    2009-06-04

    The growth and the surface structure of well-ordered V{sub 2}O{sub 3}, V{sub 2}O{sub 5} and MoO{sub 3} thin films have been investigated in this work. These films are seen as model systems for the study of elementary reaction steps occurring on vanadia and molybdena-based selective oxidation catalysts. It is shown that well-ordered V{sub 2}O{sub 3}(0001) thin films can be prepared on Au(111). The films are terminated by vanadyl groups which are not part of the V{sub 2}O{sub 3} bulk structure. Electron irradiation specifically removes the oxygen atoms of the vanadyl groups, resulting in a V-terminated surface. The fraction of removed vanadyl groups is controlled by the electron dose. Such surfaces constitute interesting models to probe the relative role of both the vanadyl groups and the undercoordinated V ions at the surface of vanadia catalysts. The growth of well-ordered V{sub 2}O{sub 5}(001) and MoO{sub 3}(010) thin films containing few point defects is reported here for the first time. These films were grown on Au(111) by oxidation under 50 mbar O{sub 2} in a dedicated high pressure cell. Contrary to some of the results found in the literature, the films are not easily reduced by annealing in UHV. This evidences the contribution of radiation and surface contamination in some of the reported thermal reduction experiments. The growth of ultrathin V{sub 2}O{sub 5} and MoO{sub 3} layers on Au(111) results in formation of interface-specific monolayer structures. These layers are coincidence lattices and they do not correspond to any known oxide bulk structure. They are assumed to be stabilized by electronic interaction with Au(111). Their formation illustrates the polymorphic character and the ease of coordination units rearrangement which are characteristic of both oxides. The formation of a second layer apparently precedes the growth of bulk-like crystallites for both oxides. This observation is at odds with a common assumption that crystals nucleate as soon as a

  6. Vanadium oxide based cpd. useful as a cathode active material - is used in lithium or alkali metal batteries to prolong life cycles

    DEFF Research Database (Denmark)

    1997-01-01

    A mixt. of metallic iron particles and vanadium pentoxide contg. V in its pentavalent state in a liq. is reacted to convert at least some of the pentavalent V to its tetravalent state and form a gel. The liq. phase is then sepd. from the oxide based gel to obtain a solid material(I) comprising Fe......, V and oxygen where at least some of the V is in the tetravalent state. USE-(I) is a cathode active material in electric current producing storage cells. ADVANTAGE-Use of (I) in Li or alkali metal batteries gives prolonged life cycles.Storage cells using (I) have improved capacity during charge...

  7. Topotactic synthesis of vanadium nitride solid foams

    International Nuclear Information System (INIS)

    Oyama, S.T.; Kapoor, R.; Oyama, H.T.; Hofmann, D.J.; Matijevic, E.

    1993-01-01

    Vanadium nitride has been synthesized with a surface area of 120 m 2 g -1 by temperature programmed nitridation of a foam-like vanadium oxide (35 m 2 g -1 ), precipitated from vanadate solutions. The nitridation reaction was established to be topotactic and pseudomorphous by x-ray powder diffraction and scanning electron microscopy. The crystallographic relationship between the nitride and oxide was {200}//{001}. The effect of precursor geometry on the product size and shape was investigated by employing vanadium oxide solids of different morphologies

  8. In situ vibrational spectroscopic investigation of C4 hydrocarbon selective oxidation over vanadium-phosphorus-oxide catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Zhi -Yang [Iowa State Univ., Ames, IA (United States)

    1999-05-10

    n-Butane selective oxidation over the VPO catalyst to maleic anhydride is the first and only commercialized process of light alkane selective oxidation. The mechanism of this reaction is still not well known despite over twenty years of extensive studies, which can partially be attributed to the extreme difficulties to characterize catalytic reactions real-time under typical reaction conditions. In situ spectroscopic characterization techniques such as Infrared spectroscopy and laser Raman spectroscopy were used in the current mechanistic investigations of n-butane oxidation over VPO catalysts. To identify the reaction intermediates, oxidation of n-butane, 1,3-butadiene and related oxygenates on the VPO catalyst were monitored using FTIR spectroscopy under transient conditions. n-Butane was found to adsorb on the VPO catalyst to form olefinic species, which were further oxidized to unsaturated, noncyclic carbonyl species. The open chain dicarbonyl species then experienced cycloaddition to form maleic anhydride. VPO catalyst phase transformations were investigated using in situ laser Raman spectroscopy. This report contains Chapter 1: General introduction; Chapter 2: Literature review; and Chapter 5: Conclusion and recommendations.

  9. Photocatalytic properties of chemically grown vanadium oxide at 65 °C

    Energy Technology Data Exchange (ETDEWEB)

    Vernardou, D., E-mail: dimitra@iesl.forth.gr [Center of Materials Technology and Photonics, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Science Department, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Drosos, H.; Fasoulas, J. [Mechanical Engineering Department, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Koudoumas, E. [Center of Materials Technology and Photonics, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Electrical Engineering Department, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Katsarakis, N. [Center of Materials Technology and Photonics, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Science Department, School of Applied Technology, Technological Educational Institute of Crete, 710 04 Heraklion, Crete (Greece); Institute of Electronic Structure and Laser, Foundation for Research and Technology—Hellas, P.O. Box 1527, Vassilika Vouton, 711 10 Heraklion, Crete (Greece)

    2014-03-31

    In this paper, the photocatalytic response of amorphous V{sub 2}O{sub 5} coatings prepared by hydrothermal growth at 65 °C is presented. The position of the substrate during the deposition and the pH of the solution were found to affect the coverage and the response of the coatings upon catalysis. The photocatalytic activity of the coatings was tested using stearic acid as a pollutant for an illumination time of 480 min. The materials grown on microscope glass positioned at an angle of 0° with respect to the bottom of the bottle exhibit the best photocatalytic activity, degrading stearic acid by 64% due to the enhanced surface coverage. - Highlights: • Hydrothermally grown amorphous V{sub 2}O{sub 5} coatings at 65 °C • Their properties are dependent on the substrate arrangement. • Their photocatalytic activity is correlated with the oxide coverage.

  10. Development of vanadium-phosphate catalysts for methanol production by selective oxidation of methane

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R.L. [Colorado School of Mines, Golden, CO (United States)

    1995-12-31

    The United States has vast natural gas reserves which could contribute significantly to our energy security if economical technologies for conversion to liquid fuels and chemicals were developed. Many of these reserves are small scale or in remote locations and of little value unless they can be transported to consumers. Transportation is economically performed via pipeline, but this route is usually unavailable in remote locations. Another option is to convert the methane in the gas to liquid hydrocarbons, such as methanol, which can easily and economically be transported by truck. Therefore, the conversion of methane to liquid hydrocarbons has the potential to decrease our dependence upon oil imports by opening new markets for natural gas and increasing its use in the transportation and chemical sectors of the economy. In this project, we are attempting to develop, and explore new catalysts capable of direct oxidation of methane to methanol. The specific objectives of this work are discussed.

  11. Mild and selective vanadium-catalyzed oxidation of benzylic, allylic, and propargylic alcohols using air

    Science.gov (United States)

    Hanson, Susan Kloek; Silks, Louis A; Wu, Ruilian

    2013-08-27

    The invention concerns processes for oxidizing an alcohol to produce a carbonyl compound. The processes comprise contacting the alcohol with (i) a gaseous mixture comprising oxygen; and (ii) an amine compound in the presence of a catalyst, having the formula: ##STR00001## where each of R.sup.1-R.sup.12 are independently H, alkyl, aryl, CF.sub.3, halogen, OR.sup.13, SO.sub.3R.sup.14, C(O)R.sup.15, CONR.sup.16R.sup.17 or CO.sub.2R.sup.18; each of R.sup.13-R.sup.18 is independently alkyl or aryl; and Z is alkl or aryl.

  12. Photocatalytic properties of chemically grown vanadium oxide at 65 °C

    International Nuclear Information System (INIS)

    Vernardou, D.; Drosos, H.; Fasoulas, J.; Koudoumas, E.; Katsarakis, N.

    2014-01-01

    In this paper, the photocatalytic response of amorphous V 2 O 5 coatings prepared by hydrothermal growth at 65 °C is presented. The position of the substrate during the deposition and the pH of the solution were found to affect the coverage and the response of the coatings upon catalysis. The photocatalytic activity of the coatings was tested using stearic acid as a pollutant for an illumination time of 480 min. The materials grown on microscope glass positioned at an angle of 0° with respect to the bottom of the bottle exhibit the best photocatalytic activity, degrading stearic acid by 64% due to the enhanced surface coverage. - Highlights: • Hydrothermally grown amorphous V 2 O 5 coatings at 65 °C • Their properties are dependent on the substrate arrangement. • Their photocatalytic activity is correlated with the oxide coverage

  13. Aqueous vanadium ion dynamics relevant to bioinorganic chemistry: A review.

    Science.gov (United States)

    Kustin, Kenneth

    2015-06-01

    Aqueous solutions of the four highest vanadium oxidation states exhibit four diverse colors, which only hint at the diverse reactions that these ions can undergo. Cationic vanadium ions form complexes with ligands; anionic vanadium ions form complexes with ligands and self-react to form isopolyanions. All vanadium species undergo oxidation-reduction reactions. With a few exceptions, elucidation of the dynamics of these reactions awaited the development of fast reaction techniques before the kinetics of elementary ligation, condensation, reduction, and oxidation of the aqueous vanadium ions could be investigated. As the biological roles played by endogenous and therapeutic vanadium expand, it is appropriate to bring the results of the diverse kinetics studies under one umbrella. To achieve this goal this review presents a systematic examination of elementary aqueous vanadium ion dynamics. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Selective Oxidation Using Flame Aerosol Synthesized Iron and Vanadium-Doped Nano-TiO2

    Directory of Open Access Journals (Sweden)

    Zhong-Min Wang

    2011-01-01

    Full Text Available Selective photocatalytic oxidation of 1-phenyl ethanol to acetophenone using titanium dioxide (TiO2 raw and doped with Fe or V, prepared by flame aerosol deposition method, was investigated. The effects of metal doping on crystal phase and morphology of the synthesized nanostructured TiO2 were analyzed using XRD, TEM, Raman spectroscopy, and BET nitrogen adsorbed surface area measurement. The increase in the concentration of V and Fe reduced the crystalline structure and the anatase-to-rutile ratios of the synthesized TiO2. Synthesized TiO2 became fine amorphous powder as the Fe and V concentrations were increased to 3 and 5%, respectively. Doping V and Fe to TiO2 synthesized by the flame aerosol increased photocatalytic activity by 6 folds and 2.5 folds, respectively, compared to that of pure TiO2. It was found that an optimal doping concentration for Fe and V were 0.5% and 3%, respectively. The type and concentration of the metal dopants and the method used to add the dopant to the TiO2 are critical parameters for enhancing the activity of the resulting photocatalyst. The effects of solvents on the photocatalytic reaction were also investigated by using both water and acetonitrile as the reaction medium.

  15. Synthesis of vanadium oxides 5 wt.% VO2–MxOy by sol–gel process ...

    Indian Academy of Sciences (India)

    A series of SiO2, Al2O3 and TiO2 mixed vanadium materials have been prepared from inorganic precursors via the sol–gel process and subsequently dried, calcined and reduced at elevated temperatures. Structural characterization of these materials was carried out by X-ray diffraction (XRD), N2 adsorption at 77 K, thermal ...

  16. Lithium Storage in Microstructures of Amorphous Mixed-Valence Vanadium Oxide as Anode Materials.

    Science.gov (United States)

    Zhao, Di; Zheng, Lirong; Xiao, Ying; Wang, Xia; Cao, Minhua

    2015-07-08

    Constructing three-dimensional (3 D) nanostructures with excellent structural stability is an important approach for realizing high-rate capability and a high capacity of the electrode materials in lithium-ion batteries (LIBs). Herein, we report the synthesis of hydrangea-like amorphous mixed-valence VOx microspheres (a-VOx MSs) through a facile solvothermal method followed by controlled calcination. The resultant hydrangea-like a-VOx MSs are composed of intercrossed nanosheets and, thus, construct a 3 D network structure. Upon evaluation as an anode material for LIBs, the a-VOx MSs show excellent lithium-storage performance in terms of high capacity, good rate capability, and long-term stability upon extended cycling. Specifically, they exhibit very stable cycling behavior with a highly reversible capacity of 1050 mA h g(-1) at a rate of 0.1 A g(-1) after 140 cycles. They also show excellent rate capability, with a capacity of 390 mA h g(-1) at a rate as high as 10 A g(-1) . Detailed investigations on the morphological and structural changes of the a-VOx MSs upon cycling demonstrated that the a-VOx MSs went through modification of the local VO coordinations accompanied with the formation of a higher oxidation state of V, but still with an amorphous state throughout the whole discharge/charge process. Moreover, the a-VOx MSs can buffer huge volumetric changes during the insertion/extraction process, and at the same time they remain intact even after 200 cycles of the charge/discharge process. Thus, these microspheres may be a promising anode material for LIBs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Low-Cost and Facile Synthesis of the Vanadium Oxides V2O3, VO2, and V2O5and Their Magnetic, Thermochromic and Electrochromic Properties.

    Science.gov (United States)

    Mjejri, Issam; Rougier, Aline; Gaudon, Manuel

    2017-02-06

    In this study, vanadium sesquioxide (V 2 O 3 ), dioxide (VO 2 ), and pentoxide (V 2 O 5 ) were all synthesized from a single polyol route through the precipitation of an intermediate precursor: vanadium ethylene glycolate (VEG). Various annealing treatments of the VEG precursor, under controlled atmosphere and temperature, led to the successful synthesis of the three pure oxides, with sub-micrometer crystallite size. To the best of our knowledge, the synthesis of the three oxides V 2 O 5 , VO 2 , and V 2 O 3 from a single polyol batch has never been reported in the literature. In a second part of the study, the potentialities brought about by the successful preparation of sub-micrometer V 2 O 5 , VO 2 , and V 2 O 3 are illustrated by the characterization of the electrochromic properties of V 2 O 5 films, a discussion about the metal to insulator transition of VO 2 on the basis of in situ measurements versus temperature of its electrical and optical properties, and the characterization of the magnetic transition of V 2 O 3 powder from SQUID measurements. For the latter compound, the influence of the crystallite size on the magnetic properties is discussed.

  18. Vanadium based amorphous mixed oxides used as negative electrodes of lithium batteries; Oxydes mixtes amorphes a base de vanadium comme electrodes negatives de batteries au lithium

    Energy Technology Data Exchange (ETDEWEB)

    Guyomard, D.; Leroux, F.; Sigala, C.; Le Gal La Salle, A.; Piffard, Y. [Institut des Materiaux de Nantes, 44 (France). Laboratoire de Chimie des Solides

    1996-12-31

    This paper presents recent results concerning the chemical and electrochemical synthesis, the electrochemical properties and the characterization of two new families of amorphous oxides of formula Li{sub x}MVO{sub 4} (1oxides allows the low potential reversible insertion of lithium and can be used as negative electrodes in high performance lithium-ion batteries. (J.S.) 19 refs.

  19. Supramolecular self-assembling in mesostructured materials through charge tuning in the inorganic phase

    OpenAIRE

    Roca, Manuel; El Haskouri, Jamal; Cabrera Medina, Saúl; Beltrán Porter, Aurelio; Álamo Serrano, Jaime; Beltrán Porter, Daniel; Marcos, María Dolores; Amorós del Toro, Pedro José

    1998-01-01

    Supramolecular self-assembling of organic CTA+ micelles and inorganic [VO(H2O)PO4]n^q-2 2D-anions for the isolation of hexagonal mesostructured materials can be reached by charge tuning in the inorganic phase through the adjustment of the vanadium mean oxidation state. El Haskouri, Jamal, ; Cabrera Medina, Saul, ; Beltran Porter, Aurelio, ; Alamo Serrano, Jaime, ; Beltran Porter, Daniel, ; ...

  20. Ambient condition bias stress stability of vanadium (IV) oxide phthalocyanine based p-channel organic field-effect transistors

    Science.gov (United States)

    Obaidulla, Sk Md; Singh, Subhash; Mohapatra, Y. N.; Giri, P. K.

    2018-01-01

    High bias-stress stability and low threshold voltage (V th) shift under ambient conditions are highly desirable for practical applications of organic field-effect transistors (OFETs). We demonstrate here a 20-fold enhancement in the bias-stress stability for hexamethyledisilazane (HMDS) treated vanadium (IV) oxide phthalocyanine (VOPc) based OFETs as compared to the bare VOPc case under ambient conditions. VOPc based OFETs were fabricated on bare (non treated) SiO2 and a HMDS monolayer passivated SiO2 layer, with an operating voltage of 40 V. The devices with top contact gold (Au) electrodes exhibit excellent p-channel behavior with a moderate hole mobility for the HMDS-treated device. It is demonstrated that the time dependent ON-current decay and V th shift can be effectively controlled by using self-assembled monolayers of HMDS on the VOPc layer. For the HMDS-treated case, the bias stress stability study shows the stretched exponential decay of drain current by only ~15% during the long-term operation with constant bias voltage under ambient conditions, while it shows a large decay of  >70% for the nontreated devices operated for 1000 s. The corresponding characteric decay time constant (τ) is 104 s for the HMDS treated case, while that of the the non-treated SiO2 case is only ~480 s under ambient conditions. The inferior performance of the device with bare SiO2 is traced to the charge trapping at the voids in the inter-grain region of the films, while it is almost negligible for the HMDS-treated case, as confirmed from the AFM and XRD analyses. It is believed that HMDS treatment provides an excellent interface with a low density of traps and passivates the dangling bonds, which improve the charge transport characteristics. Also, the surface morphology of the VOPc film clearly influences the device performance. Thus, the HMDS treatment provides a very attractive approach for attaining long-term air stability and a low V th shift for the VOPc based OFET

  1. Encapsulated Vanadium-Based Hybrids in Amorphous N-Doped Carbon Matrix as Anode Materials for Lithium-Ion Batteries.

    Science.gov (United States)

    Long, Bei; Balogun, Muhammad-Sadeeq; Luo, Lei; Luo, Yang; Qiu, Weitao; Song, Shuqin; Zhang, Lei; Tong, Yexiang

    2017-11-01

    Recently, researchers have made significant advancement in employing transition metal compound hybrids as anode material for lithium-ion batteries and developing simple preparation of these hybrids. To this end, this study reports a facile and scalable method for fabricating a vanadium oxide-nitride composite encapsulated in amorphous carbon matrix by simply mixing ammonium metavanadate and melamine as anode materials for lithium-ion batteries. By tuning the annealing temperature of the mixture, different hybrids of vanadium oxide-nitride compounds are synthesized. The electrode material prepared at 700 °C, i.e., VM-700, exhibits excellent cyclic stability retaining 92% of its reversible capacity after 200 cycles at a current density of 0.5 A g -1 and attractive rate performance (220 mAh g -1 ) under the current density of up to 2 A g -1 . The outstanding electrochemical properties can be attributed to the synergistic effect from heterojunction form by the vanadium compound hybrids, the improved ability of the excellent conductive carbon for electron transfer, and restraining the expansion and aggregation of vanadium oxide-nitride in cycling. These interesting findings will provide a reference for the preparation of transition metal oxide and nitride composites as well. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Solid-to-solid oxidation of a vanadium(IV) to a vanadium(V) compound: chemisty of a sulfur-containing siderophore.

    Science.gov (United States)

    Chatterjee, Pabitra B; Crans, Debbie C

    2012-09-03

    Visible light facilitates a solid-to-solid photochemical aerobic oxidation of a hunter-green microcrystalline oxidovanadium(IV) compound (1) to form a black powder of cis-dioxidovanadium(V) (2) at ambient temperature. The siderophore ligand pyridine-2,6-bis(thiocarboxylic acid), H(2)L, is secreted by a microorganism from the Pseudomonas genus. This irreversible transformation of a metal monooxo to a metal dioxo complex in the solid state in the absence of solvent is unprecedented. It serves as a proof-of-concept reaction for green chemistry occurring in solid matrixes.

  3. Reductive mineralization of cellulose with vanadium, iron and tungsten chlorides and access to MxOymetal oxides and MxOy/C metal oxide/carbon composites.

    Science.gov (United States)

    Henry, Aurélien; Hesemann, Peter; Alauzun, Johan G; Boury, Bruno

    2017-10-15

    M x O y and M x O y /C composites (M=V, Fe and W) were obtained by mineralization of cellulose with several metal chlorides. Cellulose was used both as a templating agent and as an oxygen and a carbon source. Soluble chloride molecules (VOCl 3 and WCl 6 ) and a poorly soluble ionic chloride compound (FeCl 3 ) were chosen as metal oxide precursors. In a first time, primary metal oxide/cellulose composites were obtained via a thermal treatment by reacting urea impregnated filter paper with the corresponding metal chlorides in an autoclave at 150°C after 3days. After either pyrolysis or calcination steps of these intermediate materials, interesting metal oxides with various morphologies were obtained (V 2 O 5, V 2 O 3 , Fe 3 O 4 , WO 3, H 0.23 WO 3 ), composites (V 2 O 3 /C) as well as carbides (hexagonal W 2 C and WC, Fe 3 C) This result highlight the reductive role that can play cellulose during the pyrolysis step that allows to tune the composition of M x O y /C composites. The materials were characterized by FTIR, Raman, TGA, XRD and SEM. This study highlights that cellulose can be used for a convenient preparation of a variety of highly demanded M x O y and M x O y /C composites with original shapes and morphologies. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Tuning the magnetism of epitaxial cobalt oxide thin films by electron beam irradiation

    Science.gov (United States)

    Lan, Q. Q.; Zhang, X. J.; Shen, X.; Yang, H. W.; Zhang, H. R.; Guan, X. X.; Wang, W.; Yao, Y.; Wang, Y. G.; Peng, Y.; Liu, B. G.; Sun, J. R.; Yu, R. C.

    2017-07-01

    Tuning magnetic properties of perovskite thin films is a central topic of recent studies because of its fundamental significance. In this work, we demonstrated the modification of the magnetism of L a0.9C a0.1Co O3 (LCCO) thin films by introducing a stripelike superstructure in a controllable manner using electron beam irradiation (EBI) in a transmission electron microscope. The microstructure, electronic structure, strain change, and origin of magnetism of the LCCO thin films were studied in detail using aberration-corrected scanning transmission electron microscopy, electron energy loss spectroscopy, and ab initio calculations based on density functional theory. The results indicate that the EBI-induced unit cell volume expansion accompanies the formation of oxygen vacancies and leads to the spin state transition of Co ions. The low spin state of C o4 + ions depress the stripelike superstructure, while higher spin states of Co ions with lower valences are conductive to the formation of "dark stripes". Our work clarifies the origin of magnetism of epitaxial LCCO thin films, benefiting a comprehensive understanding of correlated physics in cobalt oxide thin films.

  5. Mineralogy and geochemistry of vanadium in the Colorado Plateau

    Science.gov (United States)

    Weeks, A.D.

    1961-01-01

    The chief domestic source of vanadium is uraniferous sandstone in the Colorado Plateau. Vanadium is 3-, 4-, or 5-valent in nature and, as oxides or combined with other elements, it forms more than 40 minerals in the Plateau ores. These ores have been studied with regard to the relative amounts of vanadium silicates and oxide-vanadates, uranium-vanadium ratios, the progressive oxidation of black low-valent ores to high-valent carnotite-type ores, and theories of origin. ?? 1961.

  6. Carrier concentration tuning in thermoelectric thiospinel Cu2CoTi3S8 by oxidative extraction of copper

    Science.gov (United States)

    Hashikuni, Katsuaki; Suekuni, Koichiro; Watanabe, Kosuke; Bouyrie, Yohan; Ohta, Michihiro; Ohtaki, Michitaka; Takabatake, Toshiro

    2018-03-01

    We report a method for carrier concentration tuning in the thermoelectric thiospinel Cu2CoTi3S8, which exhibits an n-type metallic character and a high power factor. An oxidative Cu extraction treatment produced Cu defects, resulting in Cu2-xCoTi3S8 up to x = 0.62. The electron carrier concentration was effectively reduced by this treatment, leading to the decrease in power factor, whereas the electronic contribution to the thermal conductivity was suppressed. As a result, the dimensionless figure of merit ZT remained unchanged as 0.2 at 670 K in the whole range of x ≤ 0.62. The oxidative Cu extraction described in this paper offers an opportunity to tune the electron carrier concentration for Cu-containing thermoelectric materials.

  7. Quasi-one-dimensional nanostructured cobalt (Co) intercalated vanadium oxide (V{sub 2}O{sub 5}): Peroxovanadate sol gel synthesis and structural study

    Energy Technology Data Exchange (ETDEWEB)

    Langie da Silva, Douglas, E-mail: douglas.langie@ufpel.edu.br [Departamento de Física, Universidade Federal de Pelotas, Caixa Postal 354, Pelotas 96010-900 (Brazil); Moreira, Eduardo Ceretta [Laboratório de Espectroscopia, Universidade Federal do Pampa, Campus Bagé, Bagé 96400-970 (Brazil); Dias, Fábio Teixeira; Neves Vieira, Valdemar das [Departamento de Física, Universidade Federal de Pelotas, Caixa Postal 354, Pelotas 96010-900 (Brazil); Brandt, Iuri Stefani; Cas Viegas, Alexandre da; Pasa, André Avelino [Laboratório de Filmes Finos e Superfícies, Universidade Federal de Santa Catarina, Caixa Postal 476, Florianópolis 88.040-900 (Brazil)

    2015-01-15

    Nanostructured cobalt vanadium oxide (V{sub 2}O{sub 5}) xerogels spread onto crystalline Si substrates were synthesized via peroxovanadate sol gel route. The resulting products were characterized by distinct experimental techniques. The surface morphology and the nanostructure of xerogels correlate with Co concentration. The decrease of the structural coherence length is followed by the formation of a loose network of nanopores when the concentration of intercalated species was greater than 4 at% of Co. The efficiency of the synthesis route also drops with the increase of Co concentration. The interaction between the Co(OH{sub 2}){sub 6}{sup 2+} cations and the (H{sub 2}V{sub 10}O{sub 28}){sup 4−} anions during the synthesis was suggested as a possible explanation for the incomplete condensation of the V{sub 2}O{sub 5} gel. Finally the experimental results points for the intercalation of Co between the bilayers of the V{sub 2}O{sub 5}. In this scenario two possible preferential occupation sites for the metallic atoms in the framework of the xerogel were proposed. - Graphical abstract: Quasi-one-dimensional nanostructured cobalt (Co) intercalated vanadium oxide (V{sub 2}O{sub 5}) nanoribbons synthesized by peroxovanadate sol gel route. - Highlights: • Nanostructured cobalt V{sub 2}O{sub 5} gel spread onto c{sub S}i were synthesized via peroxovanadate sol gel route. • The micro and nanostructure correlates with the cobalt content. • The efficiency of the synthesis route shows to be also dependent of Co content. • The experimental results points for the intercalation of Co between the bilayers of the V{sub 2}O{sub 5} xerogel.

  8. Vanadium recycling in the United States in 2004

    Science.gov (United States)

    Goonan, Thomas G.

    2011-01-01

    As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of vanadium in the U.S. economy in 2004. This report includes a description of vanadium supply and demand in the United States and illustrates the extent of vanadium recycling and recycling trends. In 2004, apparent vanadium consumption, by end use, in the United States was 3,820 metric tons (t) in steelmaking and 232 t in manufacturing, of which 17 t was for the production of superalloys and 215 t was for the production of other alloys, cast iron, catalysts, and chemicals. Vanadium use in steel is almost entirely dissipative because recovery of vanadium from steel scrap is chemically impeded under the oxidizing conditions in steelmaking furnaces. The greatest amount of vanadium recycling is in the superalloy, other-alloy, and catalyst sectors of the vanadium market. Vanadium-bearing catalysts are associated with hydrocarbon recovery and refining in the oil industry. In 2004, 2,850 t of vanadium contained in alloy scrap and spent catalysts was recycled, which amounted to about 44 percent of U.S. domestic production. About 94 percent of vanadium use in the United States was dissipative (3,820 t in steel/4,050 t in steel+fabricated products).

  9. A new oxidimetric reagent: potassium dichromate in a strong phosphoric acid medium-VI Potentiometric titration of vanadium(III) alone and in mixture with vanadium(IV).

    Science.gov (United States)

    Rao, G G; Rao, P K

    1966-09-01

    Vanadium(III) can be titrated at room temperature with potassium dichromate in an 8-12M phosphoric acid medium. Two potential breaks are observed in 12M phosphoric add with 0.2N potassium dichromate, the first corresponding to the oxidation of vanadium(III) to vanadium(IV) and the second to the oxidation of vanadium(IV) to vanadium(V). In titrations with 0.05N dichromate only the first break in potential is clearly observed. The method has been extended to the titration of mixtures of vanadium(III) and vanadium(IV). Conditions have also been found for the visual titration of vanadium(III) using ferroln or barium diphenylamine sulphonate as indicator.

  10. Effect of vanadium substitution on structural and electrical properties of sol-gel grown nanostructured zinc oxide

    Science.gov (United States)

    Boricha, Hetal; Rajyaguru, Bhargav; Gadani, Keval; Rathod, K. N.; Shrimali, V. G.; Udeshi, Bhagyashree; Keshvani, M. J.; Joshi, A. D.; Pandya, D. D.; Solanki, P. S.; Shah, N. A.

    2017-05-01

    In the present communication, we report the results on the structural and electrical studies on nanostructured pure (ZnO) and Vanadium (V) doped Zn0.95V0.05O samples synthesized using low cost Sol-Gel technique. To understand the structural properties and their dependence on V substitution, X-Ray diffraction (XRD) measurement was carried out for both the samples understudy. XRD results reveal the single phasic wurtzite nature of both the samples showing hexagonal unit cell structure. A minor phase of ZnV2O6 is observed in V doped ZnO sample. Improved dielectric permittivity, enhanced ac conductivity (σac) and suppression in impedance have been discussed on the basis of structural modifications by the substitution of V in ZnO, enhanced charge carrier concentration, charge carrier polarization and correlated barrier hopping due to the localized state.

  11. Structural and Redox Properties of Vanadium Complexes in Molten Salts of Interest for the Catalytic Oxidation of Sulfur Dioxide

    DEFF Research Database (Denmark)

    Boghosian, S.; Chrissanthopoulos, A.; Fehrmann, Rasmus

    2000-01-01

    and vibrational properties of the vanadium complexes formed in the molten salt-gas system V2O5-M2S2O7-M2SO4/SO2-O-2 (M = K or Cs). The spectral features and the exploitation of the relative Raman intensities indicate that the (VO)(2)O(SO4)(4)(+) dimeric complex unit which possesses a V-O-V bridge is formed...... in the V2O5-M2S2O7 molten mixtures. Interaction with SO2 or addition of sulfate leads to cleavage of the V-O-V bridge and formation of the (VO)-O-IV(SO4)(2)(2-) or (VO2)-O-V(SO4)(2)(3-) complex units respectively. The most prominent Raman bands due to the V-V and V-IV complexes formed are assigned...

  12. Analyzing optical properties of thin vanadium oxide films through semiconductor-to-metal phase transition using spectroscopic ellipsometry

    Science.gov (United States)

    Sun, Jianing; Pribil, Greg K.

    2017-11-01

    We investigated the optical behaviors of vanadium dioxide (VO2) films through the semiconductor-to-metal (STM) phase transition using spectroscopic ellipsometry. Correlations between film thickness and refractive index were observed resulting from the absorbing nature of these films. Simultaneously analyzing data at multiple temperatures using Kramers-Kronig consistent oscillator models help identify film thickness. Nontrivial variations in resulting optical constants were observed through STM transition. As temperature increases, a clear increase is observed in near infrared absorption due to Drude losses that accompany the transition from semiconducting to metallic phases. Thin films grown on silicon and sapphire substrate present different optical properties and thermal hysteresis due to lattice stress and compositional differences.

  13. A method for recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite

    Science.gov (United States)

    Zhang, Yi-min; Wang, Li-na; Chen, De-sheng; Wang, Wei-jing; Liu, Ya-hui; Zhao, Hong-xin; Qi, Tao

    2018-02-01

    An innovative method for recovering valuable elements from vanadium-bearing titanomagnetite is proposed. This method involves two procedures: low-temperature roasting of vanadium-bearing titanomagnetite and water leaching of roasting slag. During the roasting process, the reduction of iron oxides to metallic iron, the sodium oxidation of vanadium oxides to water-soluble sodium vanadate, and the smelting separation of metallic iron and slag were accomplished simultaneously. Optimal roasting conditions for iron/slag separation were achieved with a mixture thickness of 42.5 mm, a roasting temperature of 1200°C, a residence time of 2 h, a molar ratio of C/O of 1.7, and a sodium carbonate addition of 70wt%, as well as with the use of anthracite as a reductant. Under the optimal conditions, 93.67% iron from the raw ore was recovered in the form of iron nugget with 95.44% iron grade. After a water leaching process, 85.61% of the vanadium from the roasting slag was leached, confirming the sodium oxidation of most of the vanadium oxides to water-soluble sodium vanadate during the roasting process. The total recoveries of iron, vanadium, and titanium were 93.67%, 72.68%, and 99.72%, respectively.

  14. Vanadium Compounds as PTP Inhibitors

    Directory of Open Access Journals (Sweden)

    Elsa Irving

    2017-12-01

    Full Text Available Phosphotyrosine signaling is regulated by the opposing actions of protein tyrosine kinases (PTKs and protein tyrosine phosphatases (PTPs. Here we discuss the potential of vanadium derivatives as PTP enzyme inhibitors and metallotherapeutics. We describe how vanadate in the V oxidized state is thought to inhibit PTPs, thus acting as a pan-inhibitor of this enzyme superfamily. We discuss recent developments in the biological and biochemical actions of more complex vanadium derivatives, including decavanadate and in particular the growing number of oxidovanadium compounds with organic ligands. Pre-clinical studies involving these compounds are discussed in the anti-diabetic and anti-cancer contexts. Although in many cases PTP inhibition has been implicated, it is also clear that many such compounds have further biochemical effects in cells. There also remain concerns surrounding off-target toxicities and long-term use of vanadium compounds in vivo in humans, hindering their progress through clinical trials. Despite these current misgivings, interest in these chemicals continues and many believe they could still have therapeutic potential. If so, we argue that this field would benefit from greater focus on improving the delivery and tissue targeting of vanadium compounds in order to minimize off-target toxicities. This may then harness their full therapeutic potential.

  15. Magnetic and transport properties of the mixed valent vanadium oxides LuV4O8 and YV4O8

    Science.gov (United States)

    Das, S.; Niazi, A.; Johnston, D. C.

    2008-03-01

    Mixed valent vanadium oxides have been subjects of wide interest owing to their exotic properties such as heavy fermion behavior below 10 K in spinel LiV2O4 and isosymmetrical phase transition and charge ordering in YbV4O8. LV4O8 (L = Y, Lu) crystallize in a structure similiar to that of orthorhombic CaFe2O4, containing four inequivalent V sites arranged in zig-zag chains. The formal oxidation state of V in these compounds is 3.25. In this study, the magnetic and transport properties of these LV4O8 compounds are reported. The magnetic susceptibility indicates two possible structural phase transitions in YV4O8 in the temperature (T) range 70--90 K@. Anomalies in the heat capacity are also seen in this temperature range. The zero- field-cooled/field-cooled magnetic susceptibilities show possible canted antiferromagnetic ordering in both YV4O8 and LuV4O8 for T < 50 K@. For LuV4O8, the dc electrical resistivity of a sintered pellet measured using a standard four-probe technique shows a strong increase at T < 100 K@.

  16. Significance of porous structure on degradatin of 2,2' dichloro diethyl sulphide and 2 chloroethyl ethyl sulphide on the surface of vanadium oxide nanostructure.

    Science.gov (United States)

    Singh, Beer; Mahato, T H; Srivastava, A K; Prasad, G K; Ganesan, K; Vijayaraghavan, R; Jain, Rajeev

    2011-06-15

    Degradation of the king of chemical warfare agent, 2,2' dichloro diethyl sulphide (HD), and its simulant 2 chloroethyl ethyl sulphide (CEES) were investigated on the surface of porous vanadium oxide nanotubes at room temperature (30 ± 2°C). Reaction kinetics was monitored by GC-FID technique and the reaction products were characterized by GC-MS. Data indicates that HD degraded faster relative to CEES inside the solid decontaminant compared to the reported liquid phase degradation of CEES and HD. Data explores the role of hydrolysis, elimination and oxidation reactions in the detoxification of HD and CEES and the first order rate constant and t(1/2) were calculated to be 0.026 h(-1), 26.6h for CEES and 0.052 h(-1), 13.24h for HD. In this report faster degradation of HD compared to CEES was explained on the basis of porous structure. Copyright © 2011 Elsevier B.V. All rights reserved.

  17. Tuning the conductivity threshold and carrier density of two-dimensional electron gas at oxide interfaces through interface engineering

    Directory of Open Access Journals (Sweden)

    H. J. Harsan Ma

    2015-08-01

    Full Text Available The two-dimensional electron gas (2DEG formed at the perovskite oxides heterostructures is of great interest because of its potential applications in oxides electronics and nanoscale multifunctional devices. A canonical example is the 2DEG at the interface between a polar oxide LaAlO3 (LAO and non-polar SrTiO3 (STO. Here, the LAO polar oxide can be regarded as the modulating or doping layer and is expected to define the electronic properties of 2DEG at the LAO/STO interface. However, to practically implement the 2DEG in electronics and device design, desired properties such as tunable 2D carrier density are necessary. Here, we report the tuning of conductivity threshold, carrier density and electronic properties of 2DEG in LAO/STO heterostructures by insertion of a La0.5Sr0.5TiO3 (LSTO layer of varying thicknesses, and thus modulating the amount of polarization of the oxide over layers. Our experimental result shows an enhancement of carrier density up to a value of about five times higher than that observed at the LAO/STO interface. A complete thickness dependent metal-insulator phase diagram is obtained by varying the thickness of LAO and LSTO providing an estimate for the critical thickness needed for the metallic phase. The observations are discussed in terms of electronic reconstruction induced by polar oxides.

  18. A predictive model of iron oxide nanoparticles flocculation tuning Z-potential in aqueous environment for biological application

    International Nuclear Information System (INIS)

    Baldassarre, Francesca; Cacciola, Matteo; Ciccarella, Giuseppe

    2015-01-01

    Iron oxide nanoparticles are the most used magnetic nanoparticles in biomedical and biotechnological field because of their nontoxicity respect to the other metals. The investigation of iron oxide nanoparticles behaviour in aqueous environment is important for the biological applications in terms of polydispersity, mobility, cellular uptake and response to the external magnetic field. Iron oxide nanoparticles tend to agglomerate in aqueous solutions; thus, the stabilisation and aggregation could be modified tuning the colloids physical proprieties. Surfactants or polymers are often used to avoid agglomeration and increase nanoparticles stability. We have modelled and synthesised iron oxide nanoparticles through a co-precipitation method, in order to study the influence of surfactants and coatings on the aggregation state. Thus, we compared experimental results to simulation model data. The change of Z-potential and the clusters size were determined by Dynamic Light Scattering. We developed a suitable numerical model to predict the flocculation. The effects of Volume Mean Diameter and fractal dimension were explored in the model. We obtained the trend of these parameters tuning the Z-potential. These curves matched with the experimental results and confirmed the goodness of the model. Subsequently, we exploited the model to study the influence of nanoparticles aggregation and stability by Z-potential and external magnetic field. The highest Z-potential is reached up with a small external magnetic influence, a small aggregation and then a high suspension stability. Thus, we obtained a predictive model of Iron oxide nanoparticles flocculation that will be exploited for the nanoparticles engineering and experimental setup of bioassays

  19. Vanadium Pentoxide Nanobelt-Reduced Graphene Oxide Nanosheet Composites as High-Performance Pseudocapacitive Electrodes: ac Impedance Spectroscopy Data Modeling and Theoretical Calculations

    Directory of Open Access Journals (Sweden)

    Sanju Gupta

    2016-07-01

    Full Text Available Graphene nanosheets and graphene nanoribbons, G combined with vanadium pentoxide (VO nanobelts (VNBs and VNBs forming GVNB composites with varying compositions were synthesized via a one-step low temperature facile hydrothermal decomposition method as high-performance electrochemical pseudocapacitive electrodes. VNBs from vanadium pentoxides (VO are formed in the presence of graphene oxide (GO, a mild oxidant, which transforms into reduced GO (rGOHT, assisting in enhancing the electronic conductivity coupled with the mechanical robustness of VNBs. From electron microscopy, surface sensitive spectroscopy and other complementary structural characterization, hydrothermally-produced rGO nanosheets/nanoribbons are decorated with and inserted within the VNBs’ layered crystal structure, which further confirmed the enhanced electronic conductivity of VNBs. Following the electrochemical properties of GVNBs being investigated, the specific capacitance Csp is determined from cyclic voltammetry (CV with a varying scan rate and galvanostatic charging-discharging (V–t profiles with varying current density. The rGO-rich composite V1G3 (i.e., VO/GO = 1:3 showed superior specific capacitance followed by VO-rich composite V3G1 (VO/GO = 3:1, as compared to V1G1 (VO/GO = 1:1 composite, besides the constituents, i.e., rGO, rGOHT and VNBs. Composites V1G3 and V3G1 also showed excellent cyclic stability and a capacitance retention of >80% after 500 cycles at the highest specific current density. Furthermore, by performing extensive simulations and modeling of electrochemical impedance spectroscopy data, we determined various circuit parameters, including charge transfer and solution resistance, double layer and low frequency capacitance, Warburg impedance and the constant phase element. The detailed analyses provided greater insights into physical-chemical processes occurring at the electrode-electrolyte interface and highlighted the comparative performance of

  20. Vanadium Pentoxide Nanobelt-Reduced Graphene Oxide Nanosheet Composites as High-Performance Pseudocapacitive Electrodes: ac Impedance Spectroscopy Data Modeling and Theoretical Calculations

    Science.gov (United States)

    Gupta, Sanju; Aberg, Bryce; Carrizosa, Sara B.; Dimakis, Nicholas

    2016-01-01

    Graphene nanosheets and graphene nanoribbons, G combined with vanadium pentoxide (VO) nanobelts (VNBs) and VNBs forming GVNB composites with varying compositions were synthesized via a one-step low temperature facile hydrothermal decomposition method as high-performance electrochemical pseudocapacitive electrodes. VNBs from vanadium pentoxides (VO) are formed in the presence of graphene oxide (GO), a mild oxidant, which transforms into reduced GO (rGOHT), assisting in enhancing the electronic conductivity coupled with the mechanical robustness of VNBs. From electron microscopy, surface sensitive spectroscopy and other complementary structural characterization, hydrothermally-produced rGO nanosheets/nanoribbons are decorated with and inserted within the VNBs’ layered crystal structure, which further confirmed the enhanced electronic conductivity of VNBs. Following the electrochemical properties of GVNBs being investigated, the specific capacitance Csp is determined from cyclic voltammetry (CV) with a varying scan rate and galvanostatic charging-discharging (V–t) profiles with varying current density. The rGO-rich composite V1G3 (i.e., VO/GO = 1:3) showed superior specific capacitance followed by VO-rich composite V3G1 (VO/GO = 3:1), as compared to V1G1 (VO/GO = 1:1) composite, besides the constituents, i.e., rGO, rGOHT and VNBs. Composites V1G3 and V3G1 also showed excellent cyclic stability and a capacitance retention of >80% after 500 cycles at the highest specific current density. Furthermore, by performing extensive simulations and modeling of electrochemical impedance spectroscopy data, we determined various circuit parameters, including charge transfer and solution resistance, double layer and low frequency capacitance, Warburg impedance and the constant phase element. The detailed analyses provided greater insights into physical-chemical processes occurring at the electrode-electrolyte interface and highlighted the comparative performance of thin

  1. Vanadium Pentoxide Nanobelt-Reduced Graphene Oxide Nanosheet Composites as High-Performance Pseudocapacitive Electrodes: ac Impedance Spectroscopy Data Modeling and Theoretical Calculations.

    Science.gov (United States)

    Gupta, Sanju; Aberg, Bryce; Carrizosa, Sara B; Dimakis, Nicholas

    2016-07-25

    Graphene nanosheets and graphene nanoribbons, G combined with vanadium pentoxide (VO) nanobelts (VNBs) and VNBs forming GVNB composites with varying compositions were synthesized via a one-step low temperature facile hydrothermal decomposition method as high-performance electrochemical pseudocapacitive electrodes. VNBs from vanadium pentoxides (VO) are formed in the presence of graphene oxide (GO), a mild oxidant, which transforms into reduced GO (rGO HT ), assisting in enhancing the electronic conductivity coupled with the mechanical robustness of VNBs. From electron microscopy, surface sensitive spectroscopy and other complementary structural characterization, hydrothermally-produced rGO nanosheets/nanoribbons are decorated with and inserted within the VNBs' layered crystal structure, which further confirmed the enhanced electronic conductivity of VNBs. Following the electrochemical properties of GVNBs being investigated, the specific capacitance C sp is determined from cyclic voltammetry (CV) with a varying scan rate and galvanostatic charging-discharging ( V-t ) profiles with varying current density. The rGO-rich composite V₁G₃ (i.e., VO/GO = 1:3) showed superior specific capacitance followed by VO-rich composite V₃G₁ (VO/GO = 3:1), as compared to V₁G₁ (VO/GO = 1:1) composite, besides the constituents, i.e., rGO, rGO HT and VNBs. Composites V₁G₃ and V₃G₁ also showed excellent cyclic stability and a capacitance retention of >80% after 500 cycles at the highest specific current density. Furthermore, by performing extensive simulations and modeling of electrochemical impedance spectroscopy data, we determined various circuit parameters, including charge transfer and solution resistance, double layer and low frequency capacitance, Warburg impedance and the constant phase element. The detailed analyses provided greater insights into physical-chemical processes occurring at the electrode-electrolyte interface and highlighted the comparative

  2. Making oxidation potentials predictable: Coordination of additives applied to the electronic fine tuning of an iron(II) complex

    KAUST Repository

    Haslinger, Stefan

    2014-11-03

    This work examines the impact of axially coordinating additives on the electronic structure of a bioinspired octahedral low-spin iron(II) N-heterocyclic carbene (Fe-NHC) complex. Bearing two labile trans-acetonitrile ligands, the Fe-NHC complex, which is also an excellent oxidation catalyst, is prone to axial ligand exchange. Phosphine- and pyridine-based additives are used for substitution of the acetonitrile ligands. On the basis of the resulting defined complexes, predictability of the oxidation potentials is demonstrated, based on a correlation between cyclic voltammetry experiments and density functional theory calculated molecular orbital energies. Fundamental insights into changes of the electronic properties upon axial ligand exchange and the impact on related attributes will finally lead to target-oriented manipulation of the electronic properties and consequently to the effective tuning of the reactivity of bioinspired systems.

  3. The influence of transition metal oxides type M+/M++ on the vanadium-tellurite glasses electrical behavior

    Science.gov (United States)

    di Prátula, Pablo E.; Terny, Soledad; Cardillo, Evangelina C.; Frechero, Marisa A.

    2015-11-01

    In this work, the electrical behavior and structural features of the system xCu2O (1 - x) (0.5V2O5·0.5MoO3) 2TeO2 compared to xAg2O (1 - x) (0.5V2O5·0.5MoO3) 2TeO2 (which was already studied) are explored. The main goal is to determine whether the electronic configuration of Cu+ and Ag+ ions is the key to understand the interactions of these ions with vanadium ions in the glassy matrix studied and to establish the nature of the particular electrical conductivity response. It is shown that despite the fact that both ions (Cu+ and Ag+) have similar electronic configurations but different sizes they have similar electrical behaviors contrary to what is commonly accepted (i.e. silver modified glasses are completely ionic systems, while copper modified glasses are purely electronic -polaronic- semiconductors). It is expected that both behave as mixed electrical conductors, neither pure polaronic nor pure ionic. It has been found that the minimum observed in the isotherm of conductivity can be explained by the structural features of this glassy matrix and not by a change in its mechanism of conduction.

  4. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Optical properties of zinc–vanadium glasses doped with samarium trioxide. B ERAIAH. Department of Physics, Bangalore University, Bangalore 560 056, India. MS received 12 June 2012; revised 6 March 2013. Abstract. Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3(x).

  5. Comparative Analysis of Particle Swarm and Differential Evolution via Tuning on Ultrasmall Titanium Oxide Nanoclusters

    Science.gov (United States)

    Inclan, Eric; Lassester, Jack; Geohegan, David; Yoon, Mina

    Optimization algorithms (OA) coupled with numerical methods enable researchers to identify and study (meta) stable nanoclusters without the control restrictions of empirical methods. An algorithm's performance is governed by two factors: (1) its compatibility with an objective function, (2) the dimension of a design space, which increases with cluster size. Although researchers often tune an algorithm's user-defined parameters (UDP), tuning is not guaranteed to improve performance. In this research, Particle Swarm (PSO) and Differential Evolution (DE), are compared by tuning their UDP in a multi-objective optimization environment (MOE). Combined with a Kolmogorov Smirnov test for statistical significance, the MOE enables the study of the Pareto Front (PF), made of the UDP settings that trade-off between best performance in energy minimization (``effectiveness'') based on force-field potential energy, and best convergence rate (``efficiency''). By studying the PF, this research finds that UDP values frequently suggested in the literature do not provide best effectiveness for these methods. Additionally, monotonic convergence is found to significantly improve efficiency without sacrificing effectiveness for very small systems, suggesting better compatibility. Work is supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division.

  6. Solution-processed vanadium oxide as a hole collection layer on an ITO electrode for high-performance polymer solar cells.

    Science.gov (United States)

    Tan, Zhan'ao; Zhang, Wenqing; Cui, Chaohua; Ding, Yuqin; Qian, Deping; Xu, Qi; Li, Liangjie; Li, Shusheng; Li, Yongfang

    2012-11-14

    A solution-processed vanadium oxide (s-VO(x)) anode buffer layer on an indium-tin-oxide (ITO) electrode was used instead of PEDOT:PSS for improving the stability and photovoltaic performance of the polymer solar cells (PSCs). The s-VO(x) layer was prepared by spin-coating a vanadyl acetylacetonate (VO(acac)(2)) isopropyl alcohol solution on the ITO electrode and then thermal annealing at 150 °C for 10 min. The s-VO(x) oxide layer is highly transparent in the visible range and shows effective hole collection property. The photovoltaic performance of the s-VO(x) buffer layer was studied by fabricating the PSCs based on poly(3-hexylthiophene) (P3HT) as an electron donor and four soluble fullerene derivatives, [6,6]-phenyl-C(61)-butyric acid methyl ester (PC(60)BM), [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(70)BM), indene-C(60) bisadduct (IC(60)BA), and indene-C(70) bisadduct (IC(70)BA), as electron acceptors. The PSCs with the s-VO(x) buffer layer show improved performance in comparison with the traditional devices with the PEDOT:PSS buffer layer on ITO, no matter which fullerene derivative was used as an acceptor. The power conversion efficiency of the PSC based on P3HT:IC(70)BA (1 : 1, w/w) with the s-VO(x) anode buffer layer reached 6.35% under the illumination of AM1.5G 100 mW cm(-2).

  7. Strengthening of Ceramic-based Artificial Nacre via Synergistic Interactions of 1D Vanadium Pentoxide and 2D Graphene Oxide Building Blocks

    Science.gov (United States)

    Knöller, Andrea; Lampa, Christian P.; Cube, Felix von; Zeng, Tingying Helen; Bell, David C.; Dresselhaus, Mildred S.; Burghard, Zaklina; Bill, Joachim

    2017-01-01

    Nature has evolved hierarchical structures of hybrid materials with excellent mechanical properties. Inspired by nacre’s architecture, a ternary nanostructured composite has been developed, wherein stacked lamellas of 1D vanadium pentoxide nanofibres, intercalated with water molecules, are complemented by 2D graphene oxide (GO) nanosheets. The components self-assemble at low temperature into hierarchically arranged, highly flexible ceramic-based papers. The papers’ mechanical properties are found to be strongly influenced by the amount of the integrated GO phase. Nanoindentation tests reveal an out-of-plane decrease in Young’s modulus with increasing GO content. Furthermore, nanotensile tests reveal that the ceramic-based papers with 0.5 wt% GO show superior in-plane mechanical performance, compared to papers with higher GO contents as well as to pristine V2O5 and GO papers. Remarkably, the performance is preserved even after stretching the composite material for 100 nanotensile test cycles. The good mechanical stability and unique combination of stiffness and flexibility enable this material to memorize its micro- and macroscopic shape after repeated mechanical deformations. These findings provide useful guidelines for the development of bioinspired, multifunctional systems whose hierarchical structure imparts tailored mechanical properties and cycling stability, which is essential for applications such as actuators or flexible electrodes for advanced energy storage. PMID:28102338

  8. Laser energy tuning of carrier effective mass and thermopower in epitaxial oxide thin films

    KAUST Repository

    Abutaha, Anas I.

    2012-04-18

    The effect of the laser fluence on high temperature thermoelectric properties of the La doped SrTiO3 (SLTO) thin films epitaxially grown on LaAlO3 〈100〉 substrates by pulsed laser deposition is clarified. It is shown that oxygen vacancies that influence the effective mass of carriers in SLTO films can be tuned by varying the laser energy. The highest power factor of 0.433 W K−1 m−1 has been achieved at 636 K for a filmdeposited using the highest laser fluence of 7 J cm−2 pulse−1.

  9. Vanadium pentoxide nanoparticles mimic vanadium haloperoxidases and thwart biofilm formation

    Science.gov (United States)

    Natalio, Filipe; André, Rute; Hartog, Aloysius F.; Stoll, Brigitte; Jochum, Klaus Peter; Wever, Ron; Tremel, Wolfgang

    2012-08-01

    Marine biofouling--the colonization of small marine microorganisms on surfaces that are directly exposed to seawater, such as ships' hulls--is an expensive problem that is currently without an environmentally compatible solution. Biofouling leads to increased hydrodynamic drag, which, in turn, causes increased fuel consumption and greenhouse gas emissions. Tributyltin-free antifouling coatings and paints based on metal complexes or biocides have been shown to efficiently prevent marine biofouling. However, these materials can damage the environment through metal leaching (for example, of copper and zinc) and bacteria resistance. Here, we show that vanadium pentoxide nanowires act like naturally occurring vanadium haloperoxidases to prevent marine biofouling. In the presence of bromide ions and hydrogen peroxide, the nanowires catalyse the oxidation of bromide ions to hypobromous acid (HOBr). Singlet molecular oxygen (1O2) is formed and this exerts strong antibacterial activity, which prevents marine biofouling without being toxic to marine biota. Vanadium pentoxide nanowires have the potential to be an alternative approach to conventional anti-biofouling agents.

  10. Synthesis of vanadium oxides 5 wt.%VO2–MxOy by sol–gel process ...

    Indian Academy of Sciences (India)

    ing micro/mesoporous oxide materials as powders with high purity and homogeneity due to its flexibility and ... organic intermediate consumed in the production of phar- maceuticals, plant-protection agents, pesticides and stabi- .... Epoxidation of cyclohexene on VO2–Mx Oy (M = Si, Al, Ti). 1189 control the remaining TBHP, ...

  11. Structure and function of vanadium haloperoxidases

    NARCIS (Netherlands)

    Wever, R.; Michibata, H.

    2012-01-01

    Vanadium haloperoxidases contain the bare metal oxide vanadate as a prosthetic group and differ strongly from the heme peroxidases in substrate specificity and molecular properties. The substrates of these enzymes are limited to halides and sulfides, which in the presence of hydrogen peroxide are

  12. Controlled synthesis and electrochemical properties of vanadium ...

    Indian Academy of Sciences (India)

    Administrator

    . Those compounds probably contained vanadium atoms in +4 oxidation state as con- firmed by a previous study (Livage 1998). TEM image. (figure S4a) of the sample obtained at 120°C revealed that it consisted of a number of nanosheets, ...

  13. Controlled synthesis and electrochemical properties of vanadium ...

    Indian Academy of Sciences (India)

    Vanadium oxides; nanostructured materials; chemical synthesis; electrochemical property; VO2(M). 1. Introduction. In the past decade, much attention has been paid on low dimensional nanomaterials with novel morphologies includ- ing nanobelts, nanotubes, nanowires, nanosheets, etc. They exhibit specific physical and ...

  14. Tuning size and catalytic activity of nano-clusters of cobalt oxide

    Indian Academy of Sciences (India)

    Cobalt oxides were prepared by three different methods: (1) by reacting cobalt nitrate with oxalic acid, (2) co-precipitating cobalt nitrate with sodium carbonate, and (3) using sodium dodecyl sulphate as organic surfactant. All three samples were characterized before and after calcination by solvent extraction and the ...

  15. Interface engineering for oxide electronics: tuning electronic properties by atomically controlled growth

    NARCIS (Netherlands)

    Huijben, Mark

    2006-01-01

    The main aim of this thesis is to develop a controlled growth with atomic precision for the realization of artificial perovskite structures, to exploit the exceptional physical properties of complex oxide materials such as high-temperature superconductors and conducting interfaces between band

  16. Electrostatic tuning of Kondo effect in a rare-earth-doped wide-band-gap oxide

    KAUST Repository

    Li, Yongfeng

    2013-04-29

    As a long-lived theme in solid-state physics, the Kondo effect reflects the many-body physics involving the short-range Coulomb interactions between itinerant electrons and localized spins in metallic materials. Here we show that the Kondo effect is present in ZnO, a prototypical wide-band-gap oxide, doped with a rare-earth element (Gd). The localized 4f electrons of Gd ions do not produce remanent magnetism, but interact strongly with the host electrons, giving rise to a saturating resistance upturn and negative magnetoresistance at low temperatures. Furthermore, the Kondo temperature and resistance can be electrostatically modulated using electric-double-layer gating with liquid ionic electrolyte. Our experiments provide the experimental evidence of tunable Kondo effect in ZnO, underscoring the magnetic interactions between localized and itinerant electrons and the emergent transport behaviors in such doped wide-band-gap oxides.

  17. Using Dopants to Tune Oxygen Vacancy Formation in Transition Metal Oxide Resistive Memory.

    Science.gov (United States)

    Jiang, Hao; Stewart, Derek A

    2017-05-17

    Introducing dopants is an important way to tailor and improve electronic properties of transition metal oxides used as high-k dielectric thin films and resistance switching layers in leading memory technologies, such as dynamic and resistive random access memory (ReRAM). Ta 2 O 5 has recently received increasing interest because Ta 2 O 5 -based ReRAM demonstrates high switching speed, long endurance, and low operating voltage. However, advances in optimizing device characteristics with dopants have been hindered by limited and contradictory experiments in this field. We report on a systematic study on how various metal dopants affect oxygen vacancy formation in crystalline and amorphous Ta 2 O 5 from first principles. We find that isoelectronic dopants and weak n-type dopants have little impact on neutral vacancy formation energy and that p-type dopants can lower the formation energy significantly by introducing holes into the system. In contrast, n-type dopants have a deleterious effect and actually increase the formation energy for charged oxygen vacancies. Given the similar doping trend reported for other binary transition metal oxides, this doping trend should be universally valid for typical binary transition metal oxides. Based on this guideline, we propose that p-type dopants (Al, Hf, Zr, and Ti) can lower the forming/set voltage and improve retention properties of Ta 2 O 5 ReRAM.

  18. On the structural and electronic properties of hexanuclear vanadium oxide clusters V6On(-/0) (n=12-15): is V6O12 cluster planar or cage-like?

    Science.gov (United States)

    Wang, Ling-Fei; Xie, Lu; Fang, Hong-Ling; Li, Yun-Fei; Zhang, Xiao-Bin; Wang, Bin; Zhang, Yong-Fan; Huang, Xin

    2014-10-15

    Density functional theory (DFT) calculations are carried out to investigate the structural and electronic properties of a series of hexanuclear vanadium oxide clusters V6On(-/0) (n=12-15). Generalized Koopmans' theorem is applied to predict the vertical detachment energies (VDEs) and simulate the photoelectron spectra (PES) for V6On(-) (n=12-15) clusters. Extensive DFT calculations are performed in search of the lowest-energy structures for both the anions and neutrals. All of these clusters appear to prefer the polyhedral cage structures, in contrast to the planar star-like structures observed in prior model surface studies for the V6O12 cluster. Molecular orbitals are performed to analyze the chemical bonding in the hexanuclear vanadium oxide clusters and provide insights into the sequential oxidation of V6On(-) (n=12-15) clusters. The V6On(-) (n=12-15) clusters possess well-defined V(5+) and V(3+) sites, and may serve as molecular models for surface defects. Electron spin density analyses show that the unpaired electrons in V6On(-) (n=12-14) clusters are primarily localized on the V(3+) sites rather than on the V(5+) sites. The difference gas phase versus model surface structures of V6O12 hints the critical roles of cluster-substrate interactions in stabilizing the planar V6O12 cluster on model surfaces. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Probing and tuning the size, morphology, chemistry and structure of nanoscale cerium oxide

    Science.gov (United States)

    Kuchibhatla, Satyanarayana Vnt

    Cerium oxide (ceria)-based materials in the nanoscale regime are of significant fundamental and technological interest. Nanoceria in pure and doped forms has current and potential use in solid oxide fuel cells, catalysis, UV-screening, chemical mechanical planarization, oxygen sensors, and bio-medical applications. The characteristic feature of Ce to switch between the +3 and +4 oxidation states renders oxygen buffering capability to ceria. The ease of this transformation was expected to be enhanced in the nanoceria. In most the practical scenarios, it is necessary to have a stable suspension of ceria nanoparticles (CNPs) over longer periods of time. However, the existing literature is confined to short term studies pertaining to synthesis and property evaluation. Having understood the need for a comprehensive understanding of the CNP suspensions, this dissertation is primarily aimed at understanding the behavior of CNPs in various chemical and physical environments. We have synthesized CNPs in the absence of any surfactants at room temperature and studied the aging characteristics. After gaining some understanding about the behavior of this functional oxide, the synthesis environment and aging temperature were varied, and their affects were carefully analyzed using various materials analysis techniques such as high resolution transmission electron microscopy (HRTEM), UV-Visible spectroscopy (UV-Vis), and X-ray photoelectron spectroscopy (XPS). When the CNPs were aged at room temperature in as-synthesized condition, they were observed to spontaneously assemble and evolve as fractal superoctahedral structures. The reasons for this unique polycrystalline morphology were attributed to the symmetry driven assembly of the individual truncated octahedral and octahedral seed of the ceria. HRTEM and Fast Fourier Transform (FFT) analyses were used to explain the agglomeration behavior and evolution of the octahedral morphology. Some of the observations were supported by

  20. Tuning of graphene oxide composition by multiple oxidations for carbon dioxide storage and capture of toxic metals

    Czech Academy of Sciences Publication Activity Database

    Nováček, M.; Jankovský, O.; Luxa, J.; Sedmidubský, D.; Pumera, M.; Fíla, V.; Lhotka, M.; Klímová, K.; Matějková, Stanislava; Sofer, Z.

    2017-01-01

    Roč. 5, č. 6 (2017), s. 2739-2748 ISSN 2050-7488 R&D Projects: GA ČR(CZ) GA15-09001S Institutional support: RVO:61388963 Keywords : graphite oxide * thermal reduction * aqueous solution Subject RIV: CA - Inorganic Chemistry OBOR OECD: Inorganic and nuclear chemistry Impact factor: 8.867, year: 2016 http://pubs.rsc.org/en/content/articlehtml/1952/ta/c6ta03631g

  1. Pathway and Surface Mechanism Studies of 1,3-butadiene Selective Oxidation Over Vanadium-Molybdenum-Oxygen Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, William David [Iowa State Univ., Ames, IA (United States)

    2001-01-01

    The partial oxidation of 1,3-butadiene has been investigated over VMoO catalysts synthesized by sol-gel techniques. Surface areas were 9-14 m2/g, and compositions were within the solid solution regime, i.e. below 15.0 mol % MoO3/(MoO3 + V2O5). Laser Raman Spectroscopy and XRD data indicated that solid solutions were formed, and pre- and post-reaction XPS data indicated that catalyst surfaces contained some V+4 and were further reduced in 1,3-butadiene oxidation. A reaction pathway for 1,3-butadiene partial oxidation to maleic anhydride was shown to involve intermediates such as 3,4-epoxy-1-butene, crotonaldehyde, furan, and 2-butene-1,4-dial. The addition of water to the reaction stream substantially increased catalyst activity and improved selectivity to crotonaldehyde and furan at specific reaction temperatures. At higher water addition concentrations, furan selectivity increased from 12% to over 25%. The catalytic effects of water addition were related to competitive adsorption with various V2O5-based surface sites, including the vanadyl V=O, corner sharing V-O-V and edge sharing V-O oxygen. Higher levels of water addition were proposed to impose acidic character by dissociative adsorption. In addition, a novel combinatorial synthesis technique for VMoO was used to investigate the phase transitions of V2O5, solid solutions of Mo in V2O5, V9Mo6O40, and other reduced VMoO compounds, characterized by laser Raman spectroscopy. The natural composition gradient imposed by the sputter deposition apparatus was used to create VMoO arrays containing 225 samples ranging from 7.0-42 mol% MoO3/(V2O5 + MoO3), determined by EDS analysis.

  2. Tuning of Activated Carbon for Solvent-Free Oxidation of Cyclohexane

    Directory of Open Access Journals (Sweden)

    Mohammad Sadiq

    2017-01-01

    Full Text Available Activated carbon (AC was prepared from carbonization of phosphoric acid soaked peanut shell at 380°C under inert atmosphere followed by activation with hydrogen peroxide. The AC was characterized by SEM, EDX, FTIR, TGA, and BET surface area and pore size analyzer. The potential of AC as a catalyst for solvent-free oxidation of cyclohexane to cyclohexanol and cyclohexanone (the mixture is known as KA oil in the presence of molecular oxygen at moderate temperature was investigated in a self-designed double-walled three-necked batch reactor. The effect of different reaction parameters/additive was optimized. The maximum productivity value (2.14 mmolg−1 h−1, without base, and 4.85 mmolg−1 h−1, with 0.2 mmol NaOH of the desired product was achieved under optimal reaction parameters: vol 12.5 mL, cat 0.4 g, time 14 h, oxygen flow 40 mL/min (pO2 760 Torr, stirring 1100 rpm, and temp 75°C. The AC shows recyclability for multiple runs without any significant loss in activity. Thus, the AC can be an efficient catalyst, due to low cost, ease of synthesis, easy recovery, nonleaching, and recyclability for multiple uses for the solvent-free oxidation of cyclohexane.

  3. Tuning dipolar magnetic interactions by controlling individual silica coating of iron oxide nanoparticles

    Science.gov (United States)

    Rivas Rojas, P. C.; Tancredi, P.; Moscoso Londoño, O.; Knobel, M.; Socolovsky, L. M.

    2018-04-01

    Single and fixed size core, core-shell nanoparticles of iron oxides coated with a silica layer of tunable thickness were prepared by chemical routes, aiming to generate a frame of study of magnetic nanoparticles with controlled dipolar interactions. The batch of iron oxides nanoparticles of 4.5 nm radii, were employed as cores for all the coated samples. The latter was obtained via thermal decomposition of organic precursors, resulting on nanoparticles covered with an organic layer that was subsequently used to promote the ligand exchange in the inverse microemulsion process, employed to coat each nanoparticle with silica. The amount of precursor and times of reaction was varied to obtain different silica shell thicknesses, ranging from 0.5 nm to 19 nm. The formation of the desired structures was corroborated by TEM and SAXS measurements, the core single-phase spinel structure was confirmed by XRD, and superparamagnetic features with gradual change related to dipolar interaction effects were obtained by the study of the applied field and temperature dependence of the magnetization. To illustrate that dipolar interactions are consistently controlled, the main magnetic properties are presented and analyzed as a function of center to center minimum distance between the magnetic cores.

  4. Tuning optical and three photon absorption properties in graphene oxide-polyvinyl alcohol free standing films

    International Nuclear Information System (INIS)

    Karthikeyan, B.; Hariharan, S.; Udayabhaskar, R.

    2016-01-01

    We report the optical and nonlinear optical properties of graphene oxide (GO)-polyvinyl alcohol (PVA) free standing films. The composite polymer films were prepared in ex-situ method. The variation in optical absorption spectra and optical constants with the amount of GO loading was noteworthy from the optical absorption spectroscopic studies. Nonlinear optical studies done at 532 nm using 5 ns laser pulses show three photon absorption like behaviour. Both steady state and time resolved fluorescence studies reveal that the GO was functioning as a pathway for the decay of fluorescence from PVA. This is attributed to the energy level modifications of GO through hydroxyl groups with PVA. Raman spectroscopy also supports the interaction between GO and PVA ions through OH radicals.

  5. Tuning optical and three photon absorption properties in graphene oxide-polyvinyl alcohol free standing films

    Energy Technology Data Exchange (ETDEWEB)

    Karthikeyan, B., E-mail: bkarthik@nitt.edu; Hariharan, S. [Department of Physics, National Institute of Technology, Tiruchirappalli 620 015 (India); Udayabhaskar, R. [Department of Physics, National Institute of Technology, Tiruchirappalli 620 015 (India); Advanced Ceramics and Nanotechnology Laboratory, Department of Materials Engineering, University of Concepcion, Concepcion 4070386 (Chile)

    2016-07-11

    We report the optical and nonlinear optical properties of graphene oxide (GO)-polyvinyl alcohol (PVA) free standing films. The composite polymer films were prepared in ex-situ method. The variation in optical absorption spectra and optical constants with the amount of GO loading was noteworthy from the optical absorption spectroscopic studies. Nonlinear optical studies done at 532 nm using 5 ns laser pulses show three photon absorption like behaviour. Both steady state and time resolved fluorescence studies reveal that the GO was functioning as a pathway for the decay of fluorescence from PVA. This is attributed to the energy level modifications of GO through hydroxyl groups with PVA. Raman spectroscopy also supports the interaction between GO and PVA ions through OH radicals.

  6. Tuning copper-dioxygen reactivity and exogenous substrate oxidations via alterations in ligand electronics.

    Science.gov (United States)

    Zhang, Christiana Xin; Liang, Hong-Chang; Kim, Eun-Il; Shearer, Jason; Helton, Matthew E; Kim, Eunsuk; Kaderli, Susan; Incarvito, Christopher D; Zuberbühler, Andreas D; Rheingold, Arnold L; Karlin, Kenneth D

    2003-01-22

    Copper(I)-dioxygen adducts are important in biological and industrial processes. For the first time we explore the relationship between ligand electronics, CuI-O2 adduct formation and exogenous substrate reactivity. The copper(I) complexes [CuI(R-MePY2)]+ (1R, where R = Cl, H, MeO, Me2N) were prepared; where R-MePY2 are 4-pyridyl substituted bis[2-(2-pyridyl)ethyl]methylamine chelates. Both the redox potential of 1R (ranging from E1/2 = -270 mV for 1Cl to -440 mV for 1MeN vs FeCp2/FeCp2+) and nuCO of the CO adducts of 1R (ranging from 2093 cm-1 for 1Cl-CO to 2075 cm-1 for 1Me2N-CO) display modest but expected systematic shifts. Dioxygen readily reacts with 1H, 1MeO, and 1Me2N, forming the side-on peroxo-CuII2 complexes [{CuII(R-MePY2)}2(O2)]2+ (2R, also containing some bis-mu-oxo-CuIII2 isomer), but there is no reaction with 1Cl. Stopped-flow studies in dichloromethane show that the formation of 2Me2N from dioxygen and 1Me2N proceeds with a k = 8.2(6) x 104 M-2 s-1 (183 K, DeltaH = -20.3(6) kJ mol-1, DeltaS = -219(3) J mol-1 K-1). Solutions of 2R readily oxidize exogenous substrates (9,10-dihydroanthracene --> anthracene, tetrahydrofuran (THF) --> 2-hydroxytetrahydrofuran (THF-OH), N,N-dimethylaniline --> N-methylaniline and formaldehyde, benzyl alcohol --> benzaldehyde, benzhydrol --> benzophenone, and methanol --> formaldehyde), forming the bis-mu-hydroxo-CuII2 complexes [{CuII(R-MePY2)(OH)}2]2+ (3R). Product yields increase as the R-group is made more electron-donating, and in some cases are quantitative with 2Me2N. Pseudo-first-order rate constants for THF and methanol oxidation reactions demonstrate a remarkable R-group dependence, again favoring the strongest ligand donor (i.e., R = Me2N). For THF oxidation to THF-OH a nearly 1500-fold increase in reaction rate is observed (kobs = 2(1) x 10-5 s-1 for 2H to 3(1) x 10-2 s-1 for 2Me2N), while methanol oxidation to formaldehyde exhibits an approximately 2000-fold increase (kobs = 5(1) x 10-5 s-1 for 2H to 1(1) x

  7. Skeletal Muscle Function during Exercise—Fine-Tuning of Diverse Subsystems by Nitric Oxide

    Directory of Open Access Journals (Sweden)

    Wilhelm Bloch

    2013-03-01

    Full Text Available Skeletal muscle is responsible for altered acute and chronic workload as induced by exercise. Skeletal muscle adaptations range from immediate change of contractility to structural adaptation to adjust the demanded performance capacities. These processes are regulated by mechanically and metabolically induced signaling pathways, which are more or less involved in all of these regulations. Nitric oxide is one of the central signaling molecules involved in functional and structural adaption in different cell types. It is mainly produced by nitric oxide synthases (NOS and by non-enzymatic pathways also in skeletal muscle. The relevance of a NOS-dependent NO signaling in skeletal muscle is underlined by the differential subcellular expression of NOS1, NOS2, and NOS3, and the alteration of NO production provoked by changes of workload. In skeletal muscle, a variety of highly relevant tasks to maintain skeletal muscle integrity and proper signaling mechanisms during adaptation processes towards mechanical and metabolic stimulations are taken over by NO signaling. The NO signaling can be mediated by cGMP-dependent and -independent signaling, such as S-nitrosylation-dependent modulation of effector molecules involved in contractile and metabolic adaptation to exercise. In this review, we describe the most recent findings of NO signaling in skeletal muscle with a special emphasis on exercise conditions. However, to gain a more detailed understanding of the complex role of NO signaling for functional adaptation of skeletal muscle (during exercise, additional sophisticated studies are needed to provide deeper insights into NO-mediated signaling and the role of non-enzymatic-derived NO in skeletal muscle physiology.

  8. Magnetism variations and susceptibility hysteresis at the metal-insulator phase transition temperature of VO2 in a composite film containing vanadium and tungsten oxides

    CSIR Research Space (South Africa)

    Akande, AA

    2015-02-01

    Full Text Available properties of V1−xCrxO2 compounds under high pressure, Phy Rev. B 77, 235111-9, 2008 [25] B. W. Mwakikunga, E. Sideras-Haddad, M. Maaza, First synthesis of vanadium dioxide by ultrasonic nebula-spray pyrolysis, Optical Materials 29 (2007) 481–487 [26] S...

  9. Hydrometallurgic treatment of a mineral containing uranium, vanadium and phosphorus

    International Nuclear Information System (INIS)

    Echenique, Patricia; Fruchtenicht, Fernando; Gil, Daniel; Vigo, Daniel; Bouza, Angel; Vert, Gabriela; Becquart, Elena

    1987-01-01

    A preliminary study of a mineral has been made towards the hydrometallurgy separation of uranium, vanadium and phosphorus. After the ore dressing, work on sulfuric acid with oxidation leaching has been made, to get the uranium, vanadium and phosphorus in solution. For the separation and purification of these elements, two alternative solvent extraction methods have been tested. One of them has been the extraction of uranium and vanadium and a selective stripping of both elements. The second one has been the selective extraction of uranium and vanadium at different aqueous solutions pH. In both methods, the same reagent has been used: di(2-ethylhexyl) phosphoric acid, kerosene as diluent with two different synergistic agents: TOPO (tri-n-octyl phosphine oxide) and TBP (tri-n-butyl phosphate). Batch studies have been made to determine the equilibrium isotherms for uranium and vanadium. A continuous countercurrent simulation method has been used to get the best phase ratio and to test different stripping agents. For the first method, an important loss of uranium and vanadium at the feed solution conditioning for the extraction step has been observed. For the second method, a good recovery of uranium has been reached, but there has been losses of vanadium in pH adjustment. Nevertheless, among these processes, the last seems to work better in this mineral hydrometallurgy. (Author) [es

  10. Vanadium Recovery from Oil Fly Ash by Carbon Removal and Roast-Leach Process

    Science.gov (United States)

    Jung, Myungwon; Mishra, Brajendra

    2018-02-01

    This research mainly focuses on the recovery of vanadium from oil fly ash by carbon removal and the roast-leach process. The oil fly ash contained about 85% unburned carbon and 2.2% vanadium by weight. A vanadium-enriched product was obtained after carbon removal, and the vanadium content of this product was 19% by weight. Next, the vanadium-enriched product was roasted with sodium carbonate to convert vanadium oxides to water-soluble sodium metavanadate. The roasted sample was leached with water at 60°C, and the extraction percentage of vanadium was about 92% by weight. Several analytical techniques, such as inductively coupled plasma atomic emission spectroscopy (ICP-AES), x-ray fluorescence (XRF), and thermogravimetric and differential thermal analysis (TG-DTA), were utilized for sample analyses. Thermodynamic modeling was also conducted with HSC chemistry software to explain the experimental results.

  11. Tuning the reactivity of Ru nanoparticles by defect engineering of the reduced graphene oxide support

    KAUST Repository

    Liu, Xin

    2014-01-01

    We systematically investigated the electronic structure of Ru nanoparticles supported on various local structures on reduced graphene oxide (rGO) by first-principles-based calculations. We showed that Ru nanoparticles prefer to nucleate at these localized defect structures on rGO, which act as strong trapping sites for Ru nanoparticles and inhibit their aggregation. The binding of Ru nanoparticles to rGO, which is dependent on these local defect structures and correlates with the interfacial charge transfer, determines the electronic structure of the composites. Further study reveals that the performance of these composites against oxygen adsorption changes proportionally with the shift of the d-band center of the nanoparticles. The correlation between the defect structures on rGO and the reactivity of the composites suggests that controlled modification of the graphenic support by defect engineering would be an efficient way to fabricate new transition metal/rGO composites with high stability and desired reactivity. This journal is © the Partner Organisations 2014.

  12. Tuning the properties of tin oxide thin films for device fabrications

    Science.gov (United States)

    Sudha, A.; Sharma, S. L.; Gupta, A. N.; Sharma, S. D.

    2017-11-01

    Tin oxide thin films were deposited on well cleaned glass substrates by thermal evaporation in vacuum and were annealed at 500 ∘C in the open atmosphere inside a furnace for 90 min for promoting the sensitivity of the films. The X-ray diffraction studies revealed that the as-deposited films were amorphous in nature and the annealed films showed appreciable crystalline behavior. The annealed thin films were then irradiated using 60Co gamma source. The radiation induced changes were then studied by X-ray diffraction, scanning electron microscopy, UV-vis spectroscopy and I- V characterization. The remarkable increase in the average grain size, the decrement in the energy band gap and resistivity due to the gamma irradiations up to a certain dose and the reversal of these properties at higher doses are the important observations. The large changes in the conductivity and energy band gap of the annealed thin films due to gamma irradiation make these films quite important device material for the fabrication of gamma sensors and dosimeters.

  13. Improving the efficiency of organic photovoltaics by tuning the work function of graphene oxide hole transporting layers

    Science.gov (United States)

    Stratakis, Emmanuel; Savva, Kyriaki; Konios, Dimitrios; Petridis, Constantinos; Kymakis, Emmanuel

    2014-05-01

    A facile, fast, non-destructive and roll-to-roll compatible photochemical method for simultaneous partial reduction and doping of graphene oxide (GO) films through ultraviolet laser irradiation in the presence of a Cl2 precursor gas is demonstrated. The photochemical chlorinated GO-Cl films were fully characterized by XPS and Raman measurements, in which grafting of chloride to the edges and the basal plane of GO was confirmed. By tuning the laser exposure time, it is possible to control the doping and reduction levels and therefore to tailor the work function (WF) of the GO-Cl layers from 4.9 eV to a maximum value of 5.23 eV. These WF values match with the HOMO level of most polymer donors employed in OPV devices. Furthermore, high efficiency poly(2,7-carbazole) derivative (PCDTBT):fullerene derivative (PC71BM) based OPVs with GO-Cl as the hole transporting layer (HTL) were demonstrated with a power conversion efficiency (PCE) of 6.56% which is 17.35% and 19.48% higher than that of the pristine GO and PEDOT:PSS based OPV devices, respectively. The performance enhancement was attributed to more efficient hole transportation due to the energy level matching between the GO-Cl and the polymer donor.

  14. Influence of oxide impurities on the chemical tuning of the thermoelectric properties of substitution derivatives of RuIn3

    Science.gov (United States)

    Wagner-Reetz, Maik; Cardoso-Gil, Raul; Schmidt, Marcus; Grin, Yuri

    2014-07-01

    A systematic investigation on tuning the charge carrier concentration by substitution of the Ru position in RuIn3 is performed. Samples with nominal composition Ru0.95T0.05In3 (T=Re, Rh, Ir) were synthesized via liquid-solid-reaction and subsequent spark plasma sintering treatment. The chemical composition was characterized by X-ray, metallographic and microstructure analysis revealing solid solutions in the samples with Rh and Ir, whereas Re cannot be incorporated in RuIn3. Minor oxide impurities in the commercially available starting elements, the homogeneity range of RuIn3 and the redox potentials of the participating elements are the key for interpreting the observed lattice parameters and the corresponding composition. Both, substitutions with Rh or Ir and Re inclusions in RuIn3 lead independently to a significant decrease of the total thermal conductivity down to approximately one half of the value observed for binary RuIn3, prepared with commercially available starting materials. The electrical resistivity was reduced by substitution and the temperature dependence changes from semiconductor-like, for RuIn3, to metal-like in the substitution derivatives. At the same time the sign change in the thermopower at high temperatures, characteristic for binary RuIn3, is suppressed, attaining only electrons as majority carriers.

  15. Interaction of titanium and vanadium with carbon dioxide under heating

    International Nuclear Information System (INIS)

    Vlasyuk, R.Z.; Kurovskij, V.Ya.; Lyapunov, V.P.; Radomysel'skij, I.D.

    1986-01-01

    The methods of gravitmetric and X-ray phase analysis as well as analysis of composition of gases in the heating chamber have been used to investigate the mechanism of titanium and vanadium interaction with carbon dioxide in the 300-1000 deg C temperature range. The analogy of mechanisms of the interaction of titanium and vanadium with carbon dioxide in oxides production on the metal surface with subsequent carbidizing treatment at temperatures above 800 deg C is shown. Temperature limits of material operation on the base of titanium or vanadium in carbon dioxide must not exceed 400 or 600 deg C, respectively

  16. Spectrophotometric determination of vanadium in environmental and biological samples

    International Nuclear Information System (INIS)

    Rekha, D.; Krishnapriya, B.; Subrahmanyam, P.; Reddyprasad, P.; Dilip Kumar, J.; Chiranjeevi, P.

    2007-01-01

    The method is based on oxidation of p-nitro aniline by vanadium (V) followed by coupling reaction with N-(1-naphthalene-1-y1)ethane-1, 2-diaminedihydrochloride (NEDA) in basic medium of pH 8 to give purple colored derivative. The derivative having an λ max 525nm is stable for 10 days. Beer's law is obeyed for vanadium (V) in the concentration range of 0.03-4.5 μg ml -1 . The proposed method was successfully applied to the analysis of vanadium in environmental and biological samples. (author)

  17. Compositional Tuning, Crystal Growth, and Magnetic Properties of Iron Phosphate Oxide

    Science.gov (United States)

    Tarne, Michael

    Iron phosphate oxide, Fe3PO4O 3, is a crystalline solid featuring magnetic Fe3+ ions on a complex lattice composed of closely-spaced triangles. Previous work from our research group on this compound has proposed a helical magnetic structure below T = 163 K attributed to J1 - J2 competing interactions between nearest-neighbor and next-nearest-neighbor iron atoms. This was based on neutron powder diffraction featuring unique broad, flat-topped magnetic reflections due to needle-like magnetic domains. In order to confirm the magnetic structure and origins of frustration, this thesis will expand upon the research focused on this compound. The first chapter focuses on single crystal growth of Fe3PO 4O3. While neutron powder diffraction provides insight to the magnetic structure, powder and domain averaging obfuscate a conclusive structure for Fe3PO4O3 and single crystal neutron scattering is necessary. Due to the incongruency of melting, single crystal growth has proven challenging. A number of techniques including flux growth, slow cooling, and optical floating zone growth were attempted and success has been achieved via heterogenous chemical vapor transport from FePO 4 using ZrCl4 as a transport agent. These crystals are of sufficient size for single crystal measurements on modern neutron diffractometers. Dilution of the magnetic sublattice in frustrated magnets can also provide insight into the nature of competing spin interactions. Dilution of the Fe 3+ lattice in Fe3PO4O3 is accomplished by substituting non-magnetic Ga3+ to form the solid solution series Fe3-xGaxPO4O3 with x = 0, 0.012, 0.06, 0.25, 0.5, 1.0, 1.5. The magnetic susceptibility and neutron powder diffraction data of these compounds are presented. A dramatic decrease of the both the helical pitch length and the domain size is observed with increasing x; for x > 0.5, the compounds lack long range magnetic order. The phases that do exhibit magnetic order show a decrease in helical pitch with increasing x

  18. Catalytic determination of vanadium in water

    Science.gov (United States)

    Fishman, M. J.; Skougstad, M.W.

    1964-01-01

    A rapid, accurate, and sensitive spectrophotometric method for the quantitative determination of trace amounts of vanadium in water is based on the catalytic effect of vanadium on the rate of oxidation of gallic acid by persulfate in acid solution. Under given conditions of concentrations of reactants, temperature, and reaction time, the extent of oxidation of gallic acid is proportional to the concentration of vanadium present. Vanadium is determined by measuring the absorbance of the sample at 415 m?? and comparison with standard solutions treated in an identical manner. Concentrations in the range of from 0.1 to 8.0 ??g. per liter may be determined with a standard deviation of 0.2 or less. By reducing the reaction time, the method may be extended to cover the range from 1 to 100 ??g. with a standard deviation of 0.8 or less. Several substances interfere, including chloride above 100 p.p.m., and bromide and iodide in much lower concentrations. Interference from the halides is eliminated or minimized by the addition of mercuric nitrate solution. Most other substances do not interfere at the concentration levels at which they commonly occur in natural waters.

  19. Metal-insulator transition in vanadium dioxide and titanium oxide using the three-dimensional periodic shell model and DV-X

    Science.gov (United States)

    Nakatsugawa, Hiroshi

    The purpose of this study is to calculate electronic structures of the metallic and insulating phases of vanadium dioxide and titanium sesquioxide by using a combination of the three-dimensional periodic shell model and the discrete-variational (DV)-X alpha cluster method. When temperature decreases, vanadium dioxide undergoes a crystallographic phase transition and a metal-insulator (MI) transition at 340K. Unlike the clear cut MI transition in vanadium dioxide, titanium sesquioxide exhibits a broad crossover between a metallic and an insulating state around 450K, which is also an MI transition. Since the DV-X alpha cluster method can calculate the energies of electron states, the combination of the periodic shell model and the cluster method must contain the possibility to clarify the origin of the MI transition in vanadium dioxide and titanium sesquioxide from the energetic point of view. Therefore, the calculation using this combination is of great significance in order to understand the very important phenomena of vanadium dioxide and titanium sesquioxide, particularly the MI transition. Besides the effects of intersite repulsive nearest neighbor electron-electron (d-d) Coulombic interaction and the spin-spin interaction by means of a generalized Hubbard Hamiltonian, the Hamiltonian in the insulating phase includes Anderson's attractive potential due to the electron-phonon interaction which stabilize the three-dimensional periodic distribution of cation pairs. The shell model estimates the electron-phonon coupling constants and provides direct theoretical evidence that the three- dimensional periodic distribution of cation pairs are stabilized in the insulating phase. In addition, the DV-X alpha cluster method calculates the electron energy in clusters, the values for the intersite repulsive nearest- neighbor d-d interaction, and the spin- spin interaction. In vanadium dioxide, the electron-phonon interaction effect and the correlation effect for 3d electrons

  20. A coordination chemistry study of hydrated and solvated cationic vanadium ions in oxidation states +III, +IV, and +V in solution and solid state.

    Science.gov (United States)

    Krakowiak, Joanna; Lundberg, Daniel; Persson, Ingmar

    2012-09-17

    The coordination chemistry of hydrated and solvated vanadium(III), oxovanadium(IV), and dioxovanadium(V) ions in the oxygen-donor solvents water, dimethyl sulfoxide (DMSO), and N,N'-dimethylpropyleneurea (DMPU) has been studied in solution by extended X-ray absorption fine structure (EXAFS) and large-angle X-ray scattering (LAXS) and in the solid state by single-crystal X-ray diffraction and EXAFS. The hydrated vanadium(III) ion has a regular octahedral configuration with a mean V-O bond distance of 1.99 Å. In the hydrated and DMSO-solvated oxovanadium(IV) ions, vanadium binds strongly to an oxo group at ca. 1.6 Å. The solvent molecule trans to the oxo group is very weakly bound, at ca. 2.2 Å, while the remaining four solvent molecules, with a mean V-O bond distance of 2.0 Å, form a plane slightly below the vanadium atom; the mean O═V-O(perp) bond angle is ca. 98°. In the DMPU-solvated oxovanadium(IV) ion, the space-demanding properties of the DMPU molecule leave no solvent molecule in the trans position to the oxo group, which reduces the coordination number to 5. The O═V-O bond angle is consequently much larger, 107°, and the mean V═O and V-O bond distances decrease to 1.58 and 1.97 Å, respectively. The hydrated and DMSO-solvated dioxovanadium(V) ions display a very distorted octahedral configuration with the oxo groups in the cis position with a mean V═O bond distance of 1.6 Å and a O═V═O bond angle of ca. 105°. The solvent molecules trans to the oxo groups are weakly bound, at ca. 2.2 Å, while the remaining two have bond distances of 2.02 Å. The experimental studies of the coordination chemistry of hydrated and solvated vanadium(III,IV,V) ions are complemented by summarizing previously reported crystal structures to yield a comprehensive description of the coordination chemistry of vanadium with oxygen-donor ligands.

  1. A coordination chemistry study of hydrated and solvated cationic vanadium ions in oxidation states +III, +IV, and +V in solution and solid state

    Science.gov (United States)

    Krakowiak, Joanna; Lundberg, Daniel

    2012-01-01

    The coordination chemistry of hydrated and solvated vanadium(III), oxovanadium(IV), and dioxovanadium(V) ions in the oxygen donor solvents water, dimethylsulfoxide (dmso) and N,N′-dimethylpropyleneurea (dmpu) has been studied in solution by EXAFS and large angle X-ray scattering (LAXS) and in solid state by single crystal X-ray diffraction and EXAFS. The hydrated vanadium(III) ion has a regular octahedral configuration with a mean V-O bond distance of 1.99 Å. In the hydrated and dimethylsulfoxide solvated oxovanadium(IV) ions vanadium binds strongly to an oxo group at ca. 1.6 Å. The solvent molecule trans to the oxo group is very weakly bound, at ca. 2.2 Å, while the remaining four solvent molecules, with a mean V-O bond distance of 2.0 Å, form a plane slightly below the vanadium atom; the mean O=V-Operp bond angle is ca. 98°. In the dmpu solvated oxovanadium(IV) ion, the space demanding properties of the dmpu molecule leaving no solvent molecule in the trans position to the oxo group which reduces the coordination number to 5. The O=V-O bond angle is consequently much larger, 106°, and the mean V=O and V-O bond distances decrease to 1.58 and 1.97 Å, respectively. The hydrated and dimethylsulfoxide solvated dioxovanadium(V) ions display a very distorted octahedral configuration with the oxo groups in cis position with mean V=O bond distances of 1.6 Å and a O=V=O bond angle of ca. 105°. The solvent molecules trans to the oxo groups are weakly bound, at ca. 2.2 Å, while the remaining two have bond distances of 2.02 Å. The experimental studies of the coordination chemistry of hydrated and solvated vanadium(III,IV,V) ions are complemented by summarizing previously reported crystal structures to yield a comprehensive description of the coordination chemistry of vanadium with oxygen donor ligands. PMID:22950803

  2. The precipitation of vanadium compounds

    International Nuclear Information System (INIS)

    Martins, A.H.; Cassa, J.C.S.

    1987-01-01

    The results of a study on the chemistry of the precipitation process of vanadium compounds in sulfuric media are presented, in order to recover the vanadium contained in the ore from Campo Alegre de Lourdes (Bahia-Brazil). (Author) [pt

  3. Proton irradiation of vanadium

    International Nuclear Information System (INIS)

    Hultgren, P.J.

    1976-04-01

    Radiation blisters were produced on vanadium, niobium, and molybdenum after bombardment with 150-keV protons. The proton fluxes ranged from approximately 3 x 10 15 to 3 x 10 16 H + /s cm 2 while the proton fluence ranged from 8 x 10 17 to 7 x 10 19 H + /cm 2 . Increases in the proton fluence produced an increase in blister size and a decrease in the blister density. The formation of blisters at temperatures below the hydride dissociation temperature was demonstrated for vanadium. 26 figures, 31 tables

  4. Controlled synthesis and electrochemical properties of vanadium ...

    Indian Academy of Sciences (India)

    Administrator

    oxides with different nanostructures by Yifu Zhang et al (pp 369–376). The composition and vanadium valence state of the surface of typical V3O7·H2O and VO2(B) nanobelts were investigated by XPS test, as shown in figure S1. The survey spectra (figures S1a and S1c) reveal that both. V3O7·H2O and VO2(B) only consist ...

  5. Controlled synthesis and electrochemical properties of vanadium ...

    Indian Academy of Sciences (India)

    Vanadium oxides (V3O7.H2O and VO2) with different morphologies have been selectively synthesized by a facile hydrothermal approach using glucose as the reducing and structure-directing reagent. The as-obtained V3O7.H2O nanobelts have a length up to several tens of micrometers, width of about 60–150 nm and ...

  6. Studies on phase and morphological evolution of silver vanadium oxides as a function of pH: evaluation of electrochemical behavior towards quantification of Pb2+ and Cd2+ ions

    Science.gov (United States)

    Gangaiah, Vijayakumar; Shivappa Adarakatti, Prashanth; Siddaramanna, Ashoka; Malingappa, Pandurangappa; Thimmanna Chandrappa, Gujjarahalli

    2017-08-01

    The effect of pH on morphological and phase evolution of silver vanadium oxide nanostructures are investigated under hydrothermal process. The results of powder x-ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) disclosed that the morphological evolution of nanobelts into nanoring structures occurs at pH in between 4 and 5 with Ag2V4O11 phase and nanobelt morphologies at pH from 6 to 7 with β-AgVO3 phase. The prepared Ag2V4O11 and β-AgVO3 have been evaluated for the simultaneous quantification of Pb2+ and Cd2+ ions in aqueous solution using differential pulse anodic stripping voltammetry. The results reveal that Ag2V4O11 shows better quantification result compared to β-AgVO3.

  7. Avalanches in vanadium sesquioxide nanodevices

    Science.gov (United States)

    Wang, Siming; Ramírez, Juan Gabriel; Schuller, Ivan K.

    2015-08-01

    The resistance versus temperature across the metal-insulator transition (MIT) of V2O3 nanodevices exhibits multiple discontinuous jumps. The jump sizes range over three orders of magnitude in resistance and their distribution follows a power law, implying that the MIT of V2O3 occurs through avalanches. While the maximum jump size depends on the device size, the power law exponent for V2O3 is independent of device geometry and different than the one found earlier in V O2 . A two-dimensional random percolation model exhibits a power law distribution different from the one found in V2O3 . Instead, the model gives a similar exponent found in another vanadium oxide, V O2 . Our results suggest that the MITs of V O2 and V2O3 are produced by different mechanisms.

  8. Dependence of Vanadium Recovery

    African Journals Online (AJOL)

    INTRODUCTION. The use of solvent extraction to recover economic minerals from lean ores has continued to generate waves of interest over the past few decades. Since vanadium is a component of various steels employed in machine parts and construction equipments (Greenwood and. Earnshaw, 1997), the study of its ...

  9. On the regiospecificity of vanadium bromoperoxidase.

    Science.gov (United States)

    Martinez, J S; Carroll, G L; Tschirret-Guth, R A; Altenhoff, G; Little, R D; Butler, A

    2001-04-11

    Vanadium haloperoxidase enzymes catalyze the oxidation of halide ions by hydrogen peroxide, producing an oxidized intermediate, which can halogenate an organic substrate or react with a second equivalent of hydrogen peroxide to produce dioxygen. Haloperoxidases are thought to be involved in the biogenesis of halogenated natural products isolated from marine organisms, including indoles and terpenes, of which many are selectively oxidized or halogenated. Little has been shown concerning the ability of the marine haloperoxidases to catalyze regioselective reactions. Here we report the regiospecific bromoperoxidative oxidation of 1,3-di-tert-butylindole by V-BrPO from the marine algae Ascophyllum nodosum and Corallina officinalis. Both enzymes catalyze the regiospecific oxidation of 1,3-di-tert-butylindole in a reaction requiring both H(2)O(2) and Br(-) as substrates, but which produce the unbrominated 1,3-di-tert-butyl-2-indolinone product exclusively, in near quantitative yield (i.e. one H(2)O(2) consumed per product). By contrast, reactions with the controlled addition of aqueous bromine solution (HOBr = Br(2) = Br(3)(-)) produce three monobromo and one dibromo-2-indolinone products, all of which differ from the V-BrPO-catalyzed product. Further, reactivities of 1,3-di-tert-butyl-2-indolinone with both aqueous bromine and V-BrPO differ significantly and shed light onto the possible nature of the oxidizing intermediate. This is the first example of a regiospecific bromination by a vanadium haloperoxidase and further extends their usefulness as catalysts.

  10. Vanadium compounds as insulin mimics.

    Science.gov (United States)

    Orvig, C; Thompson, K H; Battell, M; McNeill, J H

    1995-01-01

    That vanadium compounds act in an insulin-mimetic fashion both in vitro and in vivo has been well established. Both inorganic and organic vanadium compounds have been shown to lower plasma glucose levels, increase peripheral glucose uptake, improve insulin sensitivity, decrease plasma lipid levels, and normalize liver enzyme activities in a variety of animal models of both type I and type II diabetes. Vanadium treatment of diabetic animals does not restore plasma insulin levels but may spare pancreatic insulin. Elucidation of the mechanism(s) of action and potentiation of vanadium's insulin-mimetic effect by appropriate ligand binding would seem to be the highest priorities for future investigation.

  11. Chemistry and insulin-like properties of vanadium(IV) and vanadium(V) compounds.

    Science.gov (United States)

    Crans, D C

    2000-05-30

    The chemistry of vanadium compounds that can be taken orally is very timely since a vanadium(IV) compound, KP-102, is currently in clinical trials in humans, and the fact that human studies with inorganic salts have recently been reported. VO(acac)2 and VO(Et-acac)2 (where acac is acetylacetonato and Et-acac is 3-ethyl-2,4-pentanedionato) have long-term in vivo insulin mimetic effects in streptozotocin induced diabetic Wistar rats. Structural characterization of VO(acac)2 and two derivatives, VO(Me-acac)2 and VO(Et-acac)2, in the solid state and solution have begun to delineate the size limits of the insulin-like active species. Oral ammonium dipicolinatooxovanadium(V) is a clinically useful hypoglycemic agent in cats with naturally occurring diabetes mellitus. This compound is particularly interesting since it represents the first time that a well-characterized organic vanadium compound with the vanadium in oxidation state five has been found to be an orally effective hypoglycemic agent in animals.

  12. Phonon dispersion in vanadium

    International Nuclear Information System (INIS)

    Ivanov, A.S.; Rumiantsev, A.Yu.

    1999-01-01

    Complete text of publication follows. Phonon dispersion curves in Vanadium metal are investigated by neutron inelastic scattering using three-axis spectrometers. Due to extremely low coherent scattering amplitude of neutrons in natural isotope mixture of vanadium the phonon frequencies could be determined in the energy range below about 15 meV. Several phonon groups were measured with the polarised neutron scattering set-up. It is demonstrated that the intensity of coherent inelastic scattering observed in the non-spin-flip channel vanishes in the spin-flip channel. The phonon density of states is measured on a single crystal keeping the momentum transfer equal to a vector of reciprocal lattice where the coherent inelastic scattering is suppressed. Phonon dispersion curves in vanadium, as measured by neutron and earlier by X-ray scattering, are described in frames of a charge-fluctuation model involving monopolar and dipolar degrees of freedom. The model parameters are compared for different transition metals with body-centred cubic-structure. (author)

  13. Low activation vanadium alloys

    International Nuclear Information System (INIS)

    Witzenburg, W. van.

    1991-01-01

    The properties and general characteristics of vanadium-base alloys are reviewed in terms of the materials requirements for fusion reactor first wall and blanket structures. In this review attention is focussed on radiation response including induced radioactivity, mechanical properties, compatibility with potential coolants, physical and thermal properties, fabricability and resources. Where possible, properties are compared to those of other leading candidate structural materials, e.g. austenitic and ferritic/martensitic steels. Vanadium alloys appear to offer advantages in the areas of long-term activation, mechanical properties at temperatures above 600 deg C, radiation resistance and thermo-hydraulic design, due to superior physical and thermal properties. They also have a potential for higher temperature operation in liquid lithium systems. Disadvantages are associated with their ability to retain high concentrations of hydrogen isotopes, higher cost, more difficult fabrication and welding. A particular concern regarding use of vanadium alloys relates their reactivity with non-metallic elements, such as oxygen and nitrogen. (author). 33 refs.; 2 figs.; 2 tabs

  14. Low-temperature direct synthesis of mesoporous vanadium nitrides for electrochemical capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hae-Min [Institute of NT-IT Fusion Technology, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499 (Korea, Republic of); Jeong, Gyoung Hwa [Department of Chemistry, Ulsan National Institute of Science and Technology (UNIST), Banyeon 100, Ulsan 44919 (Korea, Republic of); Kim, Sang-Wook [Department of Molecular Science and Technology, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499 (Korea, Republic of); Kim, Chang-Koo, E-mail: changkoo@ajou.ac.kr [Department of Chemical Engineering and Department of Energy Systems Research, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499 (Korea, Republic of)

    2017-04-01

    Highlights: • Vanadium nitrides were directly synthesized by a one-step chemical precipitation method. • This method was carried out at a low temperature of 70 °C. • Vanadium nitrides had a specific capacitance of 598 F/g. • The equivalent series resistance of the vanadium nitride electrode was 1.42 Ω after 5000 cycles. - Abstract: Mesoporous vanadium nitrides are directly synthesized by a one-step chemical precipitation method at a low temperature (70 °C). Structural and morphological analyses reveal that vanadium nitride consist of long and slender nanowhiskers, and mesopores with diameters of 2–5 nm. Compositional analysis confirms the presence of vanadium in the VN structure, along with oxidized vanadium. The cyclic voltammetry and charge-discharge tests indicate that the obtained material stores charges via a combination of electric double-layer capacitance and pseudocapacitance mechanisms. The vanadium nitride electrode exhibits a specific capacitance of 598 F/g at a current density of 4 A/g. After 5000 charge-discharge cycles, the electrode has an equivalent series resistance of 1.42 Ω and retains 83% of its initial specific capacitance. This direct low-temperature synthesis of mesoporous vanadium nitrides is a simple and promising method to achieve high specific capacitance and low equivalent series resistance for electrochemical capacitor applications.

  15. Gas Selectivity Control in Co3O4 Sensor via Concurrent Tuning of Gas Reforming and Gas Filtering using Nanoscale Hetero-Overlayer of Catalytic Oxides.

    Science.gov (United States)

    Jeong, Hyun-Mook; Jeong, Seong-Yong; Kim, Jae-Hyeok; Kim, Bo-Young; Kim, Jun-Sik; Abdel-Hady, Faissal; Wazzan, Abdulaziz A; Al-Turaif, Hamad Ali; Jang, Ho Won; Lee, Jong-Heun

    2017-11-29

    Co 3 O 4 sensors with a nanoscale TiO 2 or SnO 2 catalytic overlayer were prepared by screen-printing of Co 3 O 4 yolk-shell spheres and subsequent e-beam evaporation of TiO 2 and SnO 2 . The Co 3 O 4 sensors with 5 nm thick TiO 2 and SnO 2 overlayers showed high responses (resistance ratios) to 5 ppm xylene (14.5 and 28.8) and toluene (11.7 and 16.2) at 250 °C with negligible responses to interference gases such as ethanol, HCHO, CO, and benzene. In contrast, the pure Co 3 O 4 sensor did not show remarkable selectivity toward any specific gas. The response and selectivity to methylbenzenes and ethanol could be systematically controlled by selecting the catalytic overlayer material, varying the overlayer thickness, and tuning the sensing temperature. The significant enhancement of the selectivity for xylene and toluene was attributed to the reforming of less reactive methylbenzenes into more reactive and smaller species and oxidative filtering of other interference gases, including ubiquitous ethanol. The concurrent control of the gas reforming and oxidative filtering processes using a nanoscale overlayer of catalytic oxides provides a new, general, and powerful tool for designing highly selective and sensitive oxide semiconductor gas sensors.

  16. Improved performance of organic light-emitting diode with vanadium ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 88; Issue 6. Improved performance of organic light-emitting ... Vanadium pentoxide layer deposited on the fluorine-doped tin oxide (FTO) anode by vacuum deposition has been investigated in organic light-emitting diode (OLED).With 12nm optimal thickness of V 2 O 5 ...

  17. Improved performance of organic light-emitting diode with vanadium ...

    Indian Academy of Sciences (India)

    Vanadium pentoxide layer deposited on the fluorine-doped tin oxide (FTO) anode by vacuum deposition has been investigated in organic light-emitting diode (OLED).With 12nm optimal thickness of V 2 O 5 , the luminance efficiency is increased by 1.66 times compared to the single FTO-based OLED. The improvement of ...

  18. Structural and catalytic properties of a novel vanadium containing ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 1. Structural and catalytic properties of a novel vanadium containing solid core mesoporous silica shell catalysts for gas phase oxidation reaction. N Venkatathri Vijayamohanan K Pillai A Rajini M Nooka Raju I A K Reddy. Volume 125 Issue 1 January 2013 ...

  19. Role of vanadium and pyridine in heteropolycompounds for ...

    Indian Academy of Sciences (India)

    Role of vanadium and pyridine in heteropolycompounds for selective oxidation of alcohols with hydrogen peroxide ..... structure are modified as a function of the nature of the elements introduced in their structure. The main changes .... along with the more remarkable pseudo-liquid-phase behaviour, as reported by Leng and ...

  20. Role of vanadium in Keggin heteropoly molybdate supported on ...

    Indian Academy of Sciences (India)

    Sci. Vol. 126, No. 2, March 2014, pp. 467–472. c Indian Academy of Sciences. Role of vanadium in Keggin heteropoly molybdate supported on titania catalysts for oxidation reactions. A SRIVANI, K T VENKATESWARA RAO, P S SAI PRASAD and N LINGAIAH. ∗. Catalysis Laboratory, I&PC Division, CSIR-Indian Institute of ...

  1. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3() ZnO(40-)V2O5(60) (where = 0.1–0.5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been calculated.

  2. Effect of pyridine and vanadium-, iron- and molybdenum compounds on carbonylation of azo- and nitro compounds in the presence of RhCl3x4H2O

    International Nuclear Information System (INIS)

    Manov-Yuvenskij, V.I.; Petrovskij, K.B.; Lapidus, A.L.

    1983-01-01

    The reaction of azo- and nitro compounds carbonylation in the presence of RhCl 3 x4H 2 0 and the effect of pyridine and vanadium-, iron-, molybdenum compounds, on the reaction are studied. Rhodium trichloride tetrahydrate without promotors catalyses the synthesis of isocyanates by carbonylation of azobenzenes. Pyridine, vanadium-, molybdenum compounds iron acetyl-acetonate inhibit this reaction. Molybdic acid, its salts, molybdenum trioxide, vanadium pentoxide, vanadium (4) oxichloride complex with dioxane, organometallic vanadium compounds, iron acetylacetonates and vanadium monoxide promote rhodiUm trichloride in carbonylation of nitrocompounds with carbon oxide

  3. Effect of pyridine and vanadium-, iron- and molybdenum compounds on carbonylation of azo- and nitro compounds in the presence of RhCl/sub 3/x4H/sub 2/O

    Energy Technology Data Exchange (ETDEWEB)

    Manov-Yuvenskij, V.I.; Petrovskij, K.B.; Lapidus, A.L. (AN SSSR, Moscow. Inst. Organicheskoj Khimii)

    1983-03-01

    The reaction of azo- and nitro compounds carbonylation in the presence of RhCl/sub 3/x4H/sub 2/0 and the effect of pyridine and vanadium-, iron-, molybdenum compounds, on the reaction are studied. Rhodium trichloride tetrahydrate without promotors catalyses the synthesis of isocyanates by carbonylation of azobenzenes. Pyridine, vanadium-, molybdenum compounds iron acetyl-acetonate inhibit this reaction. Molybdic acid, its salts, molybdenum trioxide, vanadium pentoxide, vanadium (4) oxichloride complex with dioxane, organometallic vanadium compounds, iron acetylacetonates and vanadium monoxide promote rhodium trichloride in carbonylation of nitrocompounds with carbon oxide.

  4. Tuning the grade of graphene: Gamma ray irradiation of free-standing graphene oxide films in gaseous phase

    Science.gov (United States)

    Dumée, Ludovic F.; Feng, Chunfang; He, Li; Allioux, Francois-Marie; Yi, Zhifeng; Gao, Weimin; Banos, Connie; Davies, Justin B.; Kong, Lingxue

    2014-12-01

    A direct approach to functionalize and reduce pre-shaped graphene oxide 3D architectures is demonstrated by gamma ray irradiation in gaseous phase under analytical grade air, N2 or H2. The formation of radicals upon gamma ray irradiation is shown to lead to surface functionalization of the graphene oxide sheets. The reduction degree of graphene oxide, which can be controlled through varying the γ-ray total dose irradiation, leads to the synthesis of highly crystalline and near defect-free graphene based materials. The crystalline structure of the graphene oxide and γ-ray reduced graphene oxide was investigated by x-ray diffraction and Raman spectroscopy. The results reveal no noticeable changes in the size of sp2 graphitic structures for the range of tested gases and total exposure doses suggesting that the irradiation in gaseous phase does not damage the graphene crystalline domains. As confirmed by X-ray photoemission spectroscopy, the C/O ratio of γ-ray reduced graphene oxide is increasing from 2.37 for graphene oxide to 6.25 upon irradiation in hydrogen gas. The removal of oxygen atoms with this reduction process in hydrogen results in a sharp 400 times increase of the electrical conductivity of γ-ray reduced graphene oxide from 0.05 S cm-1 to as high as 23 S cm-1. A significant increase of the contact angle of the γ-ray reduced graphene oxide bucky-papers and weakened oxygen rich groups characteristic peaks across the Fourier transform infrared spectra further illustrate the efficacy of the γ-ray reduction process. A mechanism correlating the interaction between hydrogen radicals formed upon γ-ray irradiation of hydrogen gas and the oxygen rich groups on the surface of the graphene oxide bucky-papers is proposed, in order to contribute to the synthesis of reduced graphene materials through solution-free chemistry routes.

  5. Material Strength in Vanadium

    Science.gov (United States)

    Pollaine, Stephen

    2005-10-01

    Preliminary results of measurements of vanadium strength at 600 kb and 1 Mb, at strain rates between 10^7/s and 10^8/s, are inconsistent with the Steinberg-Guinan [1] model, which is independent of strain rate, but can be made consistent with other models, such as PTW [2]. We compare several different strength models to the data. [1] DJ.Steinberg, S.G.Cochran, and M.W.Guinan, J. Appl. Phys. 51, 1498 (1980). [2] D.L. Preston, D.L.Tonks, and D.C. Wallace, J. Appl. Phys. 93, 211 (2003).

  6. Impedance spectroscopy study and phase transition in phospho-vanadium mixed oxide LiZnV0.5P0.5O4

    Science.gov (United States)

    Rahal, A.; Megdiche Borchani, S.; Guidara, Kamel; Megdiche, Makram

    2017-08-01

    An X-ray crystallographic study has allowed us to identify a powder of the type LiZnV0.5P0.5O4, which contains 50% of vanadium and 50% of phosphore, inside the binary system LiZnVO4-LiZnPO4. The structure is isotypic with the phenacite like LiZnP04. X-ray diffraction patterns are indexed according to the lattice parameters of the rhombohedral system and the R3 space group. IR spectra show the presence of VO4 and PO4 groups in the network of this material. The experimental results indicate that σ_{AC}(ω) is proportional to ( {ωn } ). The activation energy found from the Arrhenius plot confirms that the conduction processing of the material is not due to simple hopping mechanism. The temperature dependence of frequency exponent n was investigated to understanding the conduction mechanism in LiZnV0.5P0.5O4. The non-overlapping small Polaron tunneling (NSPT) model can explain the temperature dependence of the frequency exponent. A phase transition at T = 623 K has been evidenced by Differential scanning calorimetry (DSC) and subsequently confirmed by the analysis of dielectric and electric properties.

  7. Nano crystalline Bi{sub 2}(VO{sub 5}) phases in lithium bismuth borate glasses containing mixed vanadium-nickel oxides

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, Arti, E-mail: artidabhur@gmail.com; Khasa, S.; Dahiya, M. S. [Department of Physics, Deenbandhu Chhotu Ram University of Science and Technology, Murthal, India-131039 (India); Agarwal, A. [Department of Applied Physics, G. J. University of Science and Technology, Hisar, India-125001 (India)

    2016-05-23

    Glass composition 7V{sub 2}O{sub 5}·23Li{sub 2}O·20Bi{sub 2}O{sub 3}·50B{sub 2}O{sub 3} and x(2NiO·V{sub 2}O{sub 5})·(30-x)Li{sub 2}O·20Bi{sub 2}O{sub 3}·50B{sub 2}O{sub 3}, x=0, 2, 5, 7 and 10, were produced by conventional melt quenching technique. The quenched amorphous glass samples were annealed at temperatures 400°C and 500°C for 6 hours. The Bi{sub 2}(VO{sub 5}) crystallite were grown in all prepared glass matrix. Tn vanadium lithium bismuth borate glass (annealed), the some phrase of V{sub 2}O{sub 5}-crystal were observed along with the nano crystalline Bi{sub 2}(VO{sub 5}) phase. The sharp peaks in FTTR spectra of all annealed compositions were also compatible with the XRD diffraction peaks of the system under investigation. Average crystalline size (D) of the Bi{sub 2}(VO{sub 5}) nano-crystallite was ~30 nm for samples annealed at 400°C and ~42 nm for samples annealed at 500°C. Lattice parameter and the lattice strain for all the samples was also calculated corresponding to the (113) plane of Bi{sub 2}(VO{sub 5}) crystallite.

  8. Electrochemical characterization of self-assembled monolayers (SAMs) of silanes on indium tin oxide (ITO) electrodes--tuning electron transfer behaviour across electrode-electrolyte interface.

    Science.gov (United States)

    Muthurasu, A; Ganesh, V

    2012-05-15

    In this work, we have systematically investigated the formation and characterization of Self-assembled Monolayer (SAM) films of several silanes on indium tin oxide (ITO) surfaces. Silane molecules having different domains namely substrate binding domain (siloxanes), electron transport region (aliphatic and aromatic spacer) and terminal functional groups (-SH, -CH(3) groups) are employed for the study in order to tune the electron transfer (ET) behaviour across SAM modified electrode-electrolyte interface. Structural characterization of these monolayer films is carried out using X-ray photoelectron spectroscopy (XPS) studies. Wettability (hydrophilic and hydrophobic nature) of such modified electrodes is evaluated using contact angle measurements. ET behaviour of these modified electrodes is investigated by electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K(4)Fe(II)(CN)(6)|K(3)Fe(III)(CN)(6) redox couple as a probe. Disappearance of redox peaks in the CV measurements and formation of semicircle having a higher charge transfer resistance (R(ct)) values during EIS studies suggest that the resultant monolayer films are compact, highly ordered with very low defects and posses good blocking property with less pinholes. The heterogeneous ET rate constant (k) values are determined from EIS by fitting them to an appropriate equivalent circuit model. Based on our results, we comment on tuning the ET behaviour across the interface by a proper choice of spacer region. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Tuning crystal phase of NiS{sub x} through electro-oxidized nickel foam: A novel route for preparing efficient electrocatalysts for oxygen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiao; Shang, Xiao [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Rao, Yi [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Dong, Bin, E-mail: dongbin@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Han, Guan-Qun [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580, PR China (China); Hu, Wen-Hui; Liu, Yan-Ru; Yan, Kai-Li; Chi, Jing-Qi; Chai, Yong-Ming [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Liu, Chen-Guang, E-mail: cgliu@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China)

    2017-02-28

    Highlights: • Electro-oxidized nickel foam as a support has been used to prepare NiS{sub x} phases. • Ni(OH){sub 2} layer on electro-oxidized NF is responsible for the growth of β-NiS. • NiS{sub x}/NF(Ox) composed of β-NiS and Ni{sub 3}S{sub 2} has enhanced electrocatalytic activity. • The growth mechanisms of mixed NiS{sub x} phases of NiS{sub x}/NF(Ox) have been discussed. - Abstract: A facile solvothermal sulfurization using electro-oxidized nickel foam (NF(Ox)) as support has been applied to prepare NiS{sub x}/NF(Ox) electrocatalyst with highly efficient activity for oxygen evolution reaction (OER). XRD patterns confirm the composition of NiS{sub x}/NF(Ox): two kinds of crystal phase including β-NiS and Ni{sub 3}S{sub 2}. While using bare NF as support under identical conditions, only Ni{sub 3}S{sub 2} phase can be detected. SEM images reveal two kinds of morphologies of NiS{sub x}/NF(Ox) including pyramids structure of β-NiS and nanorod-like structure of Ni{sub 3}S{sub 2}, which implies the tuning effect of electro-pretreatment of NF on the selective preparation of NiS{sub x} crystal phase. It can be speculated that Ni(OH){sub 2} layer derived from electro-oxidized NF is responsible for the growth of β-NiS while metallic Ni is transformed into Ni{sub 2}S{sub 3} during sulfurization. Electrochemical measurements for OER indicate the enhanced electrocatalytic activity of NiS{sub x}/NF(Ox) with a small overpotential of 72 mV to reach 10 mA cm{sup −2} compared with Ni{sub 3}S{sub 2}/NF, which may be ascribed to the improved electron-transfer kinetics relating to the unique atomic configurations and crystalline structures of β-NiS. The electro-oxidation pretreatment of nickel foam provides a simple and convenient method by tuning different NiS{sub x} crystal phases for preparing excellent OER eletrocatalysts.

  10. Embodied Tuning

    DEFF Research Database (Denmark)

    Mortensen, Christian Hviid; Vestergaard, Vitus

    2014-01-01

    and explore the physical gallery space. We implemented a simple low-cost prototype system called Exaudimus allowing users to search for the audio streams using their own bodies as a metaphorical radio tuning dial. We tested the concept in a public exhibition at the Media Museum in Denmark. A small qualitative...

  11. The determination of vanadium in brines by atomic absorption spectroscopy

    Science.gov (United States)

    Crump-Wiesner, Hans J.; Feltz, H.R.; Purdy, W.C.

    1971-01-01

    A standard addition method is described for the determination of vanadium in brines by atomic absorption spectroscopy with a nitrous oxide-acetylene flame. Sample pH is adjusted to 1.0 with concentrated hydrochloric acid and the vanadium is directly extracted with 5% cupferron in methyl isobutyl ketone (MIBK). The ketone layer is then aspirated into the flame and the recorded absorption values are plotted as a function of the concentration of the added metal. As little as 2.5 ??g l-1 of vanadium can be detected under the conditions of the procedure. Tungsten and tin interfere when present in excess of 5 and 10 ??g ml-1, respectively. The concentrations of the two interfering ions normally found in brines are well below interference levels. ?? 1971.

  12. Vanadium-modified molecular sieves: preparation, characterization and catalysis

    Directory of Open Access Journals (Sweden)

    Ângela A. Teixeira-Neto

    2009-01-01

    Full Text Available Vanadium-containing molecular sieves are redox catalysts and are good candidates as substitutes for oxide-supported V2O5 in a number of reactions. These materials have the advantage of presenting better dispersion of vanadium species, as well as shape-selective properties and controllable acidities. They may be prepared by one-pot synthesis or by post-synthesis methods and a number of techniques such as diffuse reflectance UV-visible spectroscopy, 51V nuclear magnetic resonance and electron paramagnetic resonance, to name but a few, have been used to characterize these materials. In this review, methods of preparation of vanadium-modified molecular sieves, their characterization and applications in catalysis are discussed.

  13. Interaction of titanium and vanadium with carbon dioxide in heating

    International Nuclear Information System (INIS)

    Vlasyuk, R.Z.; Kurovskii, V.Y.; Lyapunov, A.P.; Radomysel'skii, I.D.

    1986-01-01

    To obtain prediction data on the change in properties of titaniumand vanadium-base powder metallurgy materials operating in a carbon dioxide atmosphere, and also to clarify the mechanism of their interaction with the gas in this work, gravimetric investigations of specimens heated at temperatures of 300-1000 C and an x-ray diffraction analysis of their surface were made and the composition of the gas in the heating chamber was studied. The results of the investigations indicate a similarity between the mechanisms of interaction of titanium and vanadium with carbon dioxide including the formation of oxides on the surface of the metal with subsequent carbidization at temperatures above 800 C. On the basis of the data obtained, it may be concluded that the operating temperature limits of titanium- or vanadium-base materials in carbon dioxide must not exceed 400 and 600 C, respectively

  14. Determination of Vanadium Binding Mode on Seawater-Contacted Polyamidoxime Adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhicheng [Lawrence Berkeley National Laboratory (LBNL); Rao, Linfeng [Lawrence Berkeley National Laboratory (LBNL); Abney, Carter W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bryantsev, Vyacheslav [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ivanov, Aleksandr [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    Adsorbents developed for the recovery of uranium from seawater display poor selectivity over other transition metals present in the ocean, with vanadium particularly problematic. To improve selectivity, an indispensable step is the positive identification of metal binding environments following actual seawater deployment. In this work we apply x-ray absorption fine structure (XAFS) spectroscopy to directly investigate the vanadium binding environment on seawater-deployed polyamidoxime adsorbents. Comparison of the x-ray absorption near edge spectra (XANES) reveal marked similarities to recently a reported non-oxido vanadium (V) structure formed upon binding with cyclic imidedioxime, a byproduct of generating amidoxime functionalities. Density functional theory (DFT) calculations provided a series of putative vanadium binding environments for both vanadium (IV) and vanadium (V) oxidation states, and with both amidoxime and cyclic imidedioxime. Fits of the extended XAFS (EXAFS) data confirmed vanadium (V) is bound exclusively by the cyclic imidedioxime moiety in a 1:2 metal:ligand fashion, though a modest structural distortion is also observed compared to crystal structure data and computationally optimized geometries which is attributed to morphology effects from the polymer graft chain and the absence of crystal packing interactions. These results demonstrate that improved selectivity for uranium over vanadium can be achieved by suppressing the formation of cyclic imidedioxime during preparation of polyamidoxime adsorbents for seawater uranium recovery.

  15. Partial Oxidation of Methane Over Co-ZSM-5: Tuning the Oxygenate Selectivity by Altering the Preparation Route

    NARCIS (Netherlands)

    Beznis, N.|info:eu-repo/dai/nl/304837296; Weckhuysen, B.M.|info:eu-repo/dai/nl/285484397; Bitter, J.H.|info:eu-repo/dai/nl/160581435

    2013-01-01

    For the first time the possibility to partially oxidize methane to methanol and formaldehyde at low temperature over Co-ZSM-5 using air is shown. The influence of the preparation method on the nature of the cobalt species is investigated. In addition, the catalytic activity and selectivity for

  16. Influence of Ligand Architecture in Tuning Reaction Bifurcation Pathways for Chlorite Oxidation by Non-Heme Iron Complexes

    NARCIS (Netherlands)

    Barman, Prasenjit; Faponle, Abayomi S; Vardhaman, Anil Kumar; Angelone, Davide; Löhr, Anna-Maria; Browne, Wesley R; Comba, Peter; Sastri, Chivukula V; de Visser, Sam P

    2016-01-01

    Reaction bifurcation processes are often encountered in the oxidation of substrates by enzymes and generally lead to a mixture of products. One particular bifurcation process that is common in biology relates to electron transfer versus oxygen atom transfer by high-valent iron(IV)-oxo complexes,

  17. Electroluminescence color tuning between green and red from metal-oxide-semiconductor devices fabricated by spin-coating of rare-earth (terbium + europium) organic compounds on silicon

    Science.gov (United States)

    Matsuda, Toshihiro; Hattori, Fumihiro; Iwata, Hideyuki; Ohzone, Takashi

    2018-04-01

    Color tunable electroluminescence (EL) from metal-oxide-semiconductor devices with the rare-earth elements Tb and Eu is reported. Organic compound liquid sources of (Tb + Ba) and Eu with various Eu/Tb ratios from 0.001 to 0.4 were spin-coated on an n+-Si substrate and annealed to form an oxide insulator layer. The EL spectra had only peaks corresponding to the intrashell Tb3+/Eu3+ transitions in the spectral range from green to red, and the intensity ratio of the peaks was appropriately tuned using the appropriate Eu/Tb ratios in liquid sources. Consequently, the EL emission colors linearly changed from yellowish green to yellowish orange and eventually to reddish orange on the CIE chromaticity diagram. The gate current +I G current also affected the EL colors for the medium-Eu/Tb-ratio device. The structure of the surface insulator films analyzed by cross-sectional transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS) has four layers, namely, (Tb4O7 + Eu2O3), [Tb4O7 + Eu2O3 + (Tb/Eu/Ba)SiO x ], (Tb/Eu/Ba)SiO x , and SiO x -rich oxide. The EL mechanism proposed is that electrons injected from the Si substrate into the SiO x -rich oxide and Tb/Eu/Ba-silicate layers become hot electrons accelerated in a high electric field, and then these hot electrons excite Tb3+ and Eu3+ ions in the Tb4O7/Eu2O3 layers resulting in EL emission from Tb3+ and Eu3+ intrashell transitions.

  18. Large-Scale Phenomics Identifies Primary and Fine-Tuning Roles for CRKs in Responses Related to Oxidative Stress.

    Directory of Open Access Journals (Sweden)

    Gildas Bourdais

    2015-07-01

    Full Text Available Cysteine-rich receptor-like kinases (CRKs are transmembrane proteins characterized by the presence of two domains of unknown function 26 (DUF26 in their ectodomain. The CRKs form one of the largest groups of receptor-like protein kinases in plants, but their biological functions have so far remained largely uncharacterized. We conducted a large-scale phenotyping approach of a nearly complete crk T-DNA insertion line collection showing that CRKs control important aspects of plant development and stress adaptation in response to biotic and abiotic stimuli in a non-redundant fashion. In particular, the analysis of reactive oxygen species (ROS-related stress responses, such as regulation of the stomatal aperture, suggests that CRKs participate in ROS/redox signalling and sensing. CRKs play general and fine-tuning roles in the regulation of stomatal closure induced by microbial and abiotic cues. Despite their great number and high similarity, large-scale phenotyping identified specific functions in diverse processes for many CRKs and indicated that CRK2 and CRK5 play predominant roles in growth regulation and stress adaptation, respectively. As a whole, the CRKs contribute to specificity in ROS signalling. Individual CRKs control distinct responses in an antagonistic fashion suggesting future potential for using CRKs in genetic approaches to improve plant performance and stress tolerance.

  19. Effects of vanadium complexes on cell growth of human leukemia cells and protein-DNA interactions.

    Science.gov (United States)

    Lampronti, Ilaria; Bianchi, Nicoletta; Borgatti, Monica; Fabbri, Enrica; Vizziello, Leonardo; Khan, Mahmud Tareq Hassan; Ather, Arjumand; Brezena, Dan; Tahir, Mohammad Mahroof; Gambari, Roberto

    2005-07-01

    Vanadium complexes are known to possess potent insulin-mimetic effects, high affinity for several enzymes and anticancer activity, which deserve increasing attention for application to biomedical sciences. Different vanadium complexes have been found to be more effective than the simple vanadium-(IV) and -(V) salts in experiments performed both in vitro and in vivo. Application of polyoxometalates as potential drugs against Herpes Simplex Virus and AIDS have also increased the interest to study the association between vanadium containing species and proteins. The aim of our research was to investigate the in vitro antiproliferative activity of a variety of vanadium-containing compounds, and study their ability to interfere with the molecular interactions between GATA-1 and NF-kappaB transcription factors and target DNA elements, employing electrophoretic mobility shift assays. All of the used vanadium compounds were found to exhibit antiproliferative activity, despite with differences in efficacy. Inhibition of K562 cell growth was not associated with differentiation, but with activation of apoptosis. Vanadium complexes with a +5 oxidation state and their discrete anionic units appear essential for the respective effects on K562 cells; a +4 oxidation state appears to be important in inhibiting transcription factors/DNA interactions.

  20. Synthesis of vanadium trioxide

    International Nuclear Information System (INIS)

    Yankelevich, R.G.; Vinarov, I.V.; Sheka, I.A.; Pushek, N.G.

    1976-01-01

    There have been studied the conditions for production of vanadium trioxide in a single-stage process of V 2 O 5 reduction by gaseous ammonia. To determine the optimum conditions for V 2 O 5 reduction, there have been studied the temperature range of the reaction and the effect offered by the volumetric rate and time of ammonia injection. The following conditions have proved to be the optimum ones: temperature - 450 deg C, volumetric rate of NH 3 injection at a batch of 10 g - 4 l/h, time of recovery - 3 hours. In accordance with the adopted procedure there have been synthetized the samples containing 98 - 99% V 2 O 3 [ru

  1. Vanadium As a Potential Membrane Material for Carbon Capture: Effects of Minor Flue Gas Species.

    Science.gov (United States)

    Yuan, Mengyao; Liguori, Simona; Lee, Kyoungjin; Van Campen, Douglas G; Toney, Michael F; Wilcox, Jennifer

    2017-10-03

    Vanadium and its surface oxides were studied as a potential nitrogen-selective membrane material for indirect carbon capture from coal or natural gas power plants. The effects of minor flue gas components (SO 2 , NO, NO 2 , H 2 O, and O 2 ) on vanadium at 500-600 °C were investigated by thermochemical exposure in combination with X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and in situ X-ray diffraction (XRD). The results showed that SO 2 , NO, and NO 2 are unlikely to have adsorbed on the surface vanadium oxides at 600 °C after exposure for up to 10 h, although NO and NO 2 may have exhibited oxidizing effects (e.g., exposure to 250 ppmv NO/N 2 resulted in an 2.4 times increase in surface V 2 O 5 compared to exposure to just N 2 ). We hypothesize that decomposition of surface vanadium oxides and diffusion of surface oxygen into the metal bulk are both important mechanisms affecting the composition and morphology of the vanadium membrane. The results and hypothesis suggest that the carbon capture performance of the vanadium membrane can potentially be strengthened by material and process improvements such as alloying, operating temperature reduction, and flue gas treatment.

  2. Tuning the Selectivity of Catalytic Carbon Dioxide Hydrogenation over Iridium/Cerium Oxide Catalysts with a Strong Metal-Support Interaction.

    Science.gov (United States)

    Li, Siwei; Xu, Yao; Chen, Yifu; Li, Weizhen; Lin, Lili; Li, Mengzhu; Deng, Yuchen; Wang, Xiaoping; Ge, Binghui; Yang, Ce; Yao, Siyu; Xie, Jinglin; Li, Yongwang; Liu, Xi; Ma, Ding

    2017-08-28

    A one-step ligand-free method based on an adsorption-precipitation process was developed to fabricate iridium/cerium oxide (Ir/CeO 2 ) nanocatalysts. Ir species demonstrated a strong metal-support interaction (SMSI) with the CeO 2 substrate. The chemical state of Ir could be finely tuned by altering the loading of the metal. In the carbon dioxide (CO 2 ) hydrogenation reaction it was shown that the chemical state of Ir species-induced by a SMSI-has a major impact on the reaction selectivity. Direct evidence is provided indicating that a single-site catalyst is not a prerequisite for inhibition of methanation and sole production of carbon monoxide (CO) in CO 2 hydrogenation. Instead, modulation of the chemical state of metal species by a strong metal-support interaction is more important for regulation of the observed selectivity (metallic Ir particles select for methane while partially oxidized Ir species select for CO production). The study provides insight into heterogeneous catalysts at nano, sub-nano, and atomic scales. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Investigation on V{sub 2}O{sub 5} recovery from spent vanadium catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Aniol, S.; Korolewicz, T.; Kubala, J. [Politechnika Slaska, Gliwice (Poland). Katedra Chemii i Technologii Nieorganicznej

    1995-12-31

    Possibilities of utilization of the spent vanadium catalysts, and especially of recovery of its most expensive component - V{sub 2}O{sub 5}, have been investigated. Two methods have been tested; one consisting in sintering the catalyst with appropriate fluxes with subsequent leaching the sinter with water to liberate the vanadium compounds and alternatively a method in which the vanadium compounds were leached from the catalyst with a sodium hydroxide solution with and without the addition of an oxidizing agent. (author). 5 refs, 2 tabs.

  4. Tuning the two-dimensional electron liquid at oxide interfaces by buffer-layer-engineered redox reactions

    DEFF Research Database (Denmark)

    Chen, Yunzhong; Green, Robert J.; Sutarto, Ronny

    2017-01-01

    polarities and redox reactions from disordered overlayers grown at room temperature. Using resonant x-ray reflectometry experiments, we quantify redox reactions from oxide overlayers on STO as well as polarity induced electronic reconstruction at epitaxial LSMO/STO interfaces. The analysis reveals how...... these effects can be combined in a STO/LSMO/disordered film trilayer system to yield high mobility modulation doped 2DELs, where the buffer layer undergoes a partial transformation from perovskite to brownmillerite structure. This uncovered interplay between polar discontinuities and redox reactions via buffer...

  5. Vanadium(IV) and -(V) Complexes with O,N-Chelating Aminophenolate and Pyridylalkoxide,

    NARCIS (Netherlands)

    Koten, G. van; Hagen, H.; Bezemer, C.; Boersma, J.; Kooijman, H.; Lutz, M.H.; Spek, A.L.

    2000-01-01

    Two different monoanionic O,N-chelating ligand systems, i.e., [OC6H2(CH2NMe2)-2-Me2-4,6]- (1) and [OCMe2([2]-Py)]- (2), have been applied in the synthesis of vanadium(V) complexes. The tertiary amine functionality in 1 caused reduction of the vanadium nucleus to the 4+ oxidation state with either

  6. Vanadium Contribution to the Surface Modification of Titanium Silicalite for Conversion of Benzene to Phenol

    Directory of Open Access Journals (Sweden)

    Didik Prasetyoko

    2011-05-01

    Full Text Available Vanadium oxide supported on the surface of titanium silicalite was investigated in benzene hydroxylation to determine its activity as heterogeneous catalyst. Effect of vanadium loading on structure and activity of titanium silicalite was investigated. On the basis of X-ray diffraction and infrared spectroscopy techniques, it was found that the titanium structure was remained on the modified catalyst. The catalytic activity of the modified catalyst was observed to be higher than that of parent catalyst.

  7. Vanadium Transitions during Roasting-Leaching Process of Vanadium Extraction from Stone Coal

    OpenAIRE

    Yunliang Zhao; Licai Chen; Hao Yi; Yimin Zhang; Shaoxian Song; Shenxu Bao

    2018-01-01

    The vanadium occurrence in stone coal, water leaching, and acid leaching residue was investigated by energy dispersive spectrometer (EDS) mapping and point analysis, and the vanadium transitions during roasting-leaching of stone coal were revealed. In the roasting process, vanadium-bearing muscovite is converted to K-Na-feldspar, accompanying the liberation of vanadium. Most liberated vanadium reacts with sodium salt to generate water-soluble sodium vanadate, some reacts with calcite in stone...

  8. Phase Tuning of Nanostructured Gallium Oxide via Hybridization with Reduced Graphene Oxide for Superior Anode Performance in Li-Ion Battery: An Experimental and Theoretical Study.

    Science.gov (United States)

    Patil, Sharad B; Kim, In Young; Gunjakar, Jayavant L; Oh, Seung Mi; Eom, Taedaehyeong; Kim, Hyungjun; Hwang, Seong-Ju

    2015-08-26

    The crystal phase of nanostructured metal oxide can be effectively controlled by the hybridization of gallium oxide with reduced graphene oxide (rGO) at variable concentrations. The change of the ratio of Ga2O3/rGO is quite effective in tailoring the crystal structure and morphology of nanostructured gallium oxide hybridized with rGO. This is the first example of the phase control of metal oxide through a change of the content of rGO hybridized. The calculations based on density functional theory (DFT) clearly demonstrate that the different surface formation energy and Ga local symmetry of Ga2O3 phases are responsible for the phase transition induced by the change of rGO content. The resulting Ga2O3-rGO nanocomposites show promising electrode performance for lithium ion batteries. The intermediate Li-Ga alloy phases formed during the electrochemical cycling are identified with the DFT calculations. Among the present Ga2O3-rGO nanocomposites, the material with mixed α-Ga2O3/β-Ga2O3/γ-Ga2O3 phase can deliver the largest discharge capacity with the best cyclability and rate characteristics, highlighting the importance of the control of Ga2O3/rGO ratio in optimizing the electrode activity of the composite materials. The present study underscores the usefulness of the phase-control of nanostructured metal oxides achieved by the change of rGO content in exploring novel functional nanocomposite materials.

  9. Adsorption and desorption of DNA tuned by hydroxyl groups in graphite oxides-based solid extraction material.

    Science.gov (United States)

    Akceoglu, Garbis Atam; Li, Oi Lun; Saito, Nagahiro

    2015-12-01

    The extraction of DNA is the most crucial method used in molecular biology. Up to date silica matrices has been widely applied as solid support for selective DNA adsorption and extraction. However, since adsorption force of SiOH functional groups is much greater than that of desorption force, the DNA extraction efficiency of silica surfaces is limited. In order to increase the DNA extraction yield, a new surface with different functional groups which possess of greater desorption property is required. In this study, we proposed cellulose/graphite oxide (GO) composite as an alternative material for DNA adsorption and extraction. GO/Cellulose composite provides the major adsorption and desorption of DNA by COH, which belongs to alkyl or phenol type of OH functional group. Compared to SiOH, COH is less polarized and reactive, therefore the composite might provide a higher desorption of DNA during the elution process. The GO/cellulose composite were prepared in spherical structure by mixing urea, cellulose, NaOH, Graphite oxide and water. The concentration of GO within the composites were controlled to be 0-4.15 wt.%. The extraction yield of DNA increased with increasing weight percentage of GO. The highest yield was achieved at 4.15 wt.% GO, where the extraction efficiency was reported as 660.4 ng/μl when applying 2M GuHCl as the binding buffer. The absorbance ratios between 260 nm and 280 nm (A260/A280) of the DNA elution was demonstrated as 1.86, indicating the extracted DNA consisted of high purity. The results proved that GO/cellulose composite provides a simple method for selective DNA extraction with high extraction efficiency of pure DNA. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. In-situ synthesis of reduced graphene oxide modified lithium vanadium phosphate for high-rate lithium-ion batteries via microwave irradiation

    International Nuclear Information System (INIS)

    Wang, Zhaozhi; Guo, Haifu; Yan, Peng

    2015-01-01

    Highlights: • Graphene-decorated Li 3 V 2 (PO 4 ) 3 is synthesized via microwave irradiation. • Both Li 3 V 2 (PO 4 ) 3 and RGO can be simultaneously achieved through this route. • The GO is reduced by microwave irradiation not the carbon. • Li 3 V 2 (PO 4 ) 3 /RGO displays excellent high-rate ability and cyclic stability. - Abstract: We report a simple and rapid method to synthesize graphene-modified Li 3 V 2 (PO 4 ) 3 as cathode material for lithium-ion batteries via microwave irradiation. By treating graphene oxide and the precursor of Li 3 V 2 (PO 4 ) 3 in a commercial microwave oven, both reduced graphene oxide and Li 3 V 2 (PO 4 ) 3 could be simultaneously synthesized within 5 min. The structure, morphology and electrochemical performances of as-synthesized graphene-modified Li 3 V 2 (PO 4 ) 3 are investigated systematically by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, charge/discharge tests, electrochemical impedance spectra (EIS) and cyclic voltammetry (CV). The XRD result indicates that single-phase graphene-modified Li 3 V 2 (PO 4 ) 3 with monoclinic structure can be obtained. Both SEM and TEM images show that Li 3 V 2 (PO 4 ) 3 nanocrystals are embedded in the reduced graphene oxide sheets which could provide an easy path for the electrons and Li-ions during the cycling process. Compared with the pristine Li 3 V 2 (PO 4 ) 3 electrode, graphene-modified Li 3 V 2 (PO 4 ) 3 exhibits a better high-rate ability and cyclic stability. These superior electrochemical performances are attributed to the good conductivity of reduced graphene oxide which enhances the electrons and Li-ions transport on the surface of Li 3 V 2 (PO 4 ) 3 . Thus, this simple and rapid method could be promising to synthesize graphene-modified electrode materials

  11. Determination of Leachable Vanadium (V) in Sediment

    African Journals Online (AJOL)

    NICO

    A method for speciation of vanadium in solid samples was developed for quantification of vanadium(+5) in solid samples of sediment Certified Reference Materials ... element in such environmental samples as soil, sediments and plants.3,4–5 Validation of the ... Sample Preparation for the Determination of. Vanadium(+5).

  12. Possible Cardiotoxic Effects of Vanadium

    Directory of Open Access Journals (Sweden)

    Parveen Parkash

    1990-12-01

    Full Text Available Vanadium, a ubiquitous element, is physiologically and pharmacologically an active substance and is present in most of mammalian tissues Jandhala and Horn, 1983. Large corpus of information exists on the mode of action of vanadium on cardiac muscles (Jandhala and Horn, 1983., Solaro et al, 1980, but the basis of pharma­cological lesion underlying its cardiac toxi­city is still poorly understood. Except for the solitary report of Lewis (1958 to best of our knowledge no information exists on the effect of vanadium on the functioning of heart as shown by electrocardiography.Large amounts of vanadium are relea­sed into atmosphere by combustion of fossil fuel (Vouk, 1979 and due to rapid indus­trialisation its environmental concentra­tion is reported to be increasing (Goldberg et al, 1974., Jaffe and Walters, 1977., Vouk, 1979. This necessitates the monitoring of its environmental and occupational hazards. In the present study cardiac side effects of vanadium, as revealed through ECG has been investigated in rabbits, since the electrocardiogram of rabbit resembles with of man in essential details (Weisborth et al, 1974.

  13. Selective extraction of vanadium from the APV-precipitated waste water

    Science.gov (United States)

    Li, Cui; Li, Hong-Yi; Tu, Chun-Bin; Zhang, Tao; Fang, Hai-Xing; Xie, Bing

    In the process of precipitating ammonium polyvanadate (APV) to produce vanadium pentoxide in Pan-steel in China, rest waste water usually contains about 24 333mg/L V(V), 2 100g/L Cr(VI),20 500mg/L Si(IV) and 20 100g/L Na2SO4. In order to recover valuable and also toxic metal ions contained in the waste water, effective extraction method of using anion exchange resin was realized to extract Vanadium selectively, leading to effective separation between vanadium and chromium. To ensure vanadium was absorbed by the resin, V(V) and Cr(VI) were reduced to V(IV) and Cr(III) by NaHSO3, respectively, and then V(IV) was oxidized by H2O2 to V(V) anions. Effects of temperature, solution pH, concentration of ions and absorbing time on vanadium absorption rate were investigated. Chromium was precipitated from rest solution while vanadium was eluted from resin by NaOH solution and then precipitated. Results showed that vanadium recovery of 73% could be obtained in optimized condition. The resin could be regenerated by 3% hydrochloric acid, which indicated the recyclability of the resin and thus low cost of this established method.

  14. Determination of vanadium

    International Nuclear Information System (INIS)

    Stepin, V.V.; Kurbatova, V.I.; Fedorova, N.D.

    1980-01-01

    Techniques of vanadium determination in steels and alloys are developed. Extraction-photometric method with N-phenyl-benzohydroxamic acid when V content is 0.005-0.5% is suggested. Molar coefficient of the complex quenching at lambdasub(max)=530 nm constitutes 5750. Optimum concentration is 15-150 μg per 25 ml of the solution, determination limit is 0.05 μg/ml. Chloroform is an extracting agent. A photometric method with acetohydrazide of anthranilic acid is suggested for the analysis of alloyed steels at V content 0.03-1%. The lower limit of V determination constitutes 0.64 μg/ml. Effect of Fe is removed using phosphoric acid. Amperometric method for steels and alloys at V content from 0.05 to 5% and for steels and alloys containing more than 3% W and Cr is also developed. The method is based on amperometric titration with solution of double sulfuric salt of Fe(2) and ammonium [ru

  15. Photophysical behavior of a potential drug candidate, trans-[2-(4-methoxystyryl)]quinoline-1-oxide tuned by environment effects

    Science.gov (United States)

    Szemik-Hojniak, Anna; Deperasińska, Irena; Nizhnik, Yakov P.

    2017-12-01

    Styryl and/or quinoline structural fragments, present in a large number of bioactive substances, inspired the design of various new drug candidates. In this paper, we describe the photophysical behavior of trans-[2-(4-methoxystyryl)]quinoline-1-oxide (trans-MSQNO) on the basis of X-ray analysis data, theoretical calculations as well as steady state and time-resolved spectroscopy experiments in various media. The molecule crystallizes in orthorhombic unit cell containing eight molecules of N-oxide, space group Pbca. The Nsbnd O bond is substantially shorter in comparison with the Nsbnd O bond in the ZnTPP unit [1.3052(11) Å vs. 1.335(2) Å]. Variation of emission colors from the violet ( 450 nm) through blue (480 nm), green (525 nm) and yellow (575 nm) is observed in different environments. Comparable values of lifetimes estimated both at ambient temperature and at 77 K suggest that excited state dynamics in this case is viscosity independent. DFT and TD DFT B3LYP/6-31G(d, p) calculations performed for four different trans-MSQNO rotamers in the gas phase, as well as nonpolar and polar media (PCM model) suggest that an equilibrium between them can be significantly altered even by a relatively weak interactions with the environment. It is suggested that varying intensity ratios of experimental absorption bands in different media may be due to the dominant share of one or more rotamers of the excited trans-MSQNO molecule. Gas phase calculations show also that the vertical ππ*, S0 → S1, transition resulting from the HOMO → LUMO electronic configuration exhibits only a partial CT nature. On the other hand, in polar media, a substantial increment of excited state dipole moment of all rotamers compared to the ground state, its increase with increasing solvent polarity and a significant red shift in the absorption and emission spectra, point to the enhanced CT nature of the S1 excited state. Hence, the trans-MSQNO molecule may be considered a subsequent

  16. Embodied Tuning

    DEFF Research Database (Denmark)

    Mortensen, Christian Hviid

    web accessible archives or through listening kiosks in the exhibition. Neither one takes advantage of the unique affordances of the physicality of an exhibition. Instead they most often rely on users clicking through menus, playlists and folders. We therefore propose an alternative way of exhibiting...... bodies as a metaphorical radio tuning dial. We tested the concept in a public exhibition at the Media Museum in Denmark. A small qualitative user study conducted in the exhibition shows promise for this type of immersive experience. The users however tend to perceive it as a unique and finite experience...... radio heritage where users move around and explore the physical room. We implemented a simple low-cost prototype system called Exaudimus that uses webcams to track visitors in a gallery. Using Exaudimus we position audio around the gallery allowing users to search for the audio streams using their own...

  17. Recovery of vanadium (V) from used catalysts in sulfuric acid production units by oxalic acid

    International Nuclear Information System (INIS)

    Abdulbaki, M.; Shino, O.

    2009-07-01

    Vanadium penta oxide (V 2 O 5 ), is used, in large quantities as a catalyst for the oxidation of SO 2 to SO 3 in sulfuric acid production units, during the oxidation process the level of the oxidation declines with the time because of catalyst poisoning. So the spent catalyst is usually through out in a specified special places by General Fertilizer Company which causes a pollution of the land. The present paper, studies the recovery of vanadium from the spent catalyst by using the oxalic acid. The optimal conditions of spent catalyst leaching have been studied. It has been shown that 2%(w/w) of oxalic acid is the most suitable for leaching process at 70 degree centigrade. The precipitation of vanadium using some alkaline media NH 4 OH has been also studied, it has been shown that ammonium hydroxide was the best at 50 degree centigrade. (author)

  18. Synthesis, structural approach and electronic properties of V{sub 18}O{sub 45}, (N{sub 2}C{sub 6}H{sub 14}){sub 6}: a new organically templated vanadium oxide exhibiting V{sub 2}O{sub 5} layer topology

    Energy Technology Data Exchange (ETDEWEB)

    Sicard, M.; Maignan, A. [Laboratoire Crismat-ISMRa UMR 6508, 14 - Caen (France); Riou, D. [Universite de Versailles St Quentin, Institut Lavoisier UMR CNRS 8637, 78 - Versailles (France)

    2002-02-01

    V{sub 18}O{sub 45}, (N{sub 2}C{sub 6}H{sub 14}){sub 6} was hydrothermally synthesized in the form of thin platelets. Its structural approach was investigated by single crystal X-ray diffraction (non-centrosymmetric P2{sub 1} (No 4) monoclinic space group with a 10.7713(3) Angstrom, b = 11.2697(3) Angstrom, c = 29.7630(9) Angstrom, {beta} = 93.924(1) deg., V = 3604.4(2) Angstrom{sup 3}, Z = 2). V{sub 18}O{sub 45}, (N{sub 2}C{sub 6}H{sub 14}){sub 6} exhibits a lamellar structure built up from the stacking of vanadium oxide slabs between which the di-protonated 1,4-di-aza-bi-cyclo[2.2.2]octane organic cations are intercalated. The oxide layers are topologically similar to those encountered in the parent vanadium penta-oxide V{sub 2}O{sub 5} but exhibiting here a mixed valence V{sup IV}/V{sup V} with a ratio equal to 2. The electronic conductivity measurements performed on the crystals show that the resistivity curves are described by an Arrhenius law with an activation energy of 0.16 eV. (authors)

  19. The electrical properties of semiconducting vanadium phosphate glasses

    International Nuclear Information System (INIS)

    Moridi, G.R.; Hogarth, C.A.; Hekmat Shooar, N.H.

    1984-01-01

    Vanadium phosphate glasses are a group of oxide glasses which show the semiconducting behaviour. In contrast to the conventional glasses, the conduction mechanism in these glasses is electronic, rather than being ionic. Since 1954, when the first paper appeared on the semiconducting properties of these glasses, much work has been carried out on transition-metal-oxide glasses in general, and vanadium phosphate glasses in particular. The mechanism of conduction is basicaly due to the transport of electrons between the transition-metal ions in different valency states. In the present paper, we have reviewed the previous works on the electrical characteristics of P 2 O 5 -V 2 O 5 glasses and also discussed the current theoretical ideas relevant for the interpretation of the experimental data

  20. Alteration of tissue vanadium content in diabetes.

    Science.gov (United States)

    Hamel, F G; Solomon, S S; Jespersen, A S; Blotcky, A; Rack, E; Duckworth, W C

    1993-12-01

    A great deal of interest in the element vanadium has been generated recently because of its potential as a therapeutic agent for diabetes mellitus. Vanadium's insulin-mimetic properties and its requirement for proper growth and development suggest that it may be involved in insulin's mechanism of action. We have therefore examined vanadium levels in kidney, muscle, and liver tissues from normal and diabetic BB Wistar rats. Our results indicate that diabetes mellitus can decrease the tissue vanadium content of liver, suggesting that the trace element vanadium may be important in insulin action.

  1. Thermodynamic and kinetic study of cleavage of the N-O bond of N-oxides by a vanadium(III) complex: enhanced oxygen atom transfer reaction rates for adducts of nitrous oxide and mesityl nitrile oxide.

    Science.gov (United States)

    Palluccio, Taryn D; Rybak-Akimova, Elena V; Majumdar, Subhojit; Cai, Xiaochen; Chui, Megan; Temprado, Manuel; Silvia, Jared S; Cozzolino, Anthony F; Tofan, Daniel; Velian, Alexandra; Cummins, Christopher C; Captain, Burjor; Hoff, Carl D

    2013-07-31

    Thermodynamic, kinetic, and computational studies are reported for oxygen atom transfer (OAT) to the complex V(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2, 1) from compounds containing N-O bonds with a range of BDEs spanning nearly 100 kcal mol(-1): PhNO (108) > SIPr/MesCNO (75) > PyO (63) > IPr/N2O (62) > MesCNO (53) > N2O (40) > dbabhNO (10) (Mes = mesityl; SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene; Py = pyridine; IPr = 1,3-bis(diisopropyl)phenylimidazol-2-ylidene; dbabh = 2,3:5,6-dibenzo-7-azabicyclo[2.2.1]hepta-2,5-diene). Stopped flow kinetic studies of the OAT reactions show a range of kinetic behavior influenced by both the mode and strength of coordination of the O donor and its ease of atom transfer. Four categories of kinetic behavior are observed depending upon the magnitudes of the rate constants involved: (I) dinuclear OAT following an overall third order rate law (N2O); (II) formation of stable oxidant-bound complexes followed by OAT in a separate step (PyO and PhNO); (III) transient formation and decay of metastable oxidant-bound intermediates on the same time scale as OAT (SIPr/MesCNO and IPr/N2O); (IV) steady-state kinetics in which no detectable intermediates are observed (dbabhNO and MesCNO). Thermochemical studies of OAT to 1 show that the V-O bond in O≡V(N[t-Bu]Ar)3 is strong (BDE = 154 ± 3 kcal mol(-1)) compared with all the N-O bonds cleaved. In contrast, measurement of the N-O bond in dbabhNO show it to be especially weak (BDE = 10 ± 3 kcal mol(-1)) and that dissociation of dbabhNO to anthracene, N2, and a (3)O atom is thermodynamically favorable at room temperature. Comparison of the OAT of adducts of N2O and MesCNO to the bulky complex 1 show a faster rate than in the case of free N2O or MesCNO despite increased steric hindrance of the adducts.

  2. Characterization of a novel vanadium-binding protein (VBP-129) from blood plasma of the vanadium-rich ascidian Ascidia sydneiensis samea.

    Science.gov (United States)

    Yoshihara, Masao; Ueki, Tatsuya; Yamaguchi, Nobuo; Kamino, Kei; Michibata, Hitoshi

    2008-02-01

    The ascidians, the so-called sea squirts, accumulate high levels of vanadium, a transition metal. Since Henze first observed this physiologically unusual phenomenon about one hundred years ago, it has attracted interdisciplinary attention from chemists, physiologists, and biochemists. The maximum concentration of vanadium in ascidians can reach 350 mM, and most of the vanadium ions are stored in the +3 oxidation state in the vacuoles of vanadium-accumulating blood cells known as vanadocytes. Many proteins involved in the accumulation and reduction of vanadium in the vanadocytes, blood plasma, and digestive tract have been identified. However, the process by which vanadium is taken in prior to its accumulation in vanadocytes has not been elucidated. In the present study, a novel vanadium-binding protein, designated VBP-129, was identified from blood plasma of the vanadium-rich ascidian Ascidia sydneiensis samea. Although VBP-129 mRNA was transcribed in all A. sydneiensis samea tissues examined, the VBP-129 protein was exclusively localized in blood plasma and muscle cells of this ascidian. It bound not only to VO(2+) but also to Fe(3+), Co(2+), Cu(2+), and Zn(2+); on the other hand, a truncated form of VBP-129, designated VBP-88, bound only to Co(2+), Cu(2+) and Zn(2+). In a pull-down assay, an interaction between VanabinP and VBP-129 occurred both in the presence and the absence of VO(2+). These results suggest that VBP-129 and VanabinP function cooperatively as metallochaperones in blood plasma.

  3. Spectrophotometric determination of vanadium by hydroxylamine hydrochloride

    International Nuclear Information System (INIS)

    Pandey, L.P.

    1974-01-01

    A rapid and accurate method for spectrophotometric determination of vanadium based on simple reduction of pentavalent vanadium by hydroxylamine hydrochloride in hydrochloric acid medium has been reported. The absorbance of the blue coloured is measured at 760 nm. The system obeys Beer's Law strictly within the range of 5 to 40 mg vanadium per 100 ml solution. The precision and accuracy of the technique were tested by analysing solutions containing known amounts of vanadium. The average of seven determinations with 20 mg vanadium in 100 ml solution is 20.10 which varies between 19.85 to 20.32 at 95% confidence limit. This method was applied for analysis of vanadium in ferro-vanadium and satisfactory results were obtained. Effects of acidity, time and reagents have been studied. The molar extinction coefficient of the method was found to be 17. (author)

  4. Study on the poisoning effect-of non-vanadium catalysts by potassium

    Science.gov (United States)

    Zeng, Huanmu; Liu, Ying; Yu, Xiaowei; Lin, Yasi

    2018-02-01

    The poisoning effect of catalyst by alkali metals is one of the problems in the selective catalytic reduction (SCR) of NO by NH3. Serious deactivation by alkali poisoning have been proved to take place in the commercial vanadium catalyst. Recently, non-vanadium catalysts such as copper oxides, manganese oxides, chromium oxides and cerium oxides have attracted special attentions in SCR application. However, their tolerance in the presence of alkali metals is still doubtful. In this paper, copper oxides, manganese oxides, chromium oxides and cerium oxides supported on TiO2 nanoparticle was prepared by impregnating method. Potassium nitrate was chosen as the precursor of poisoner. Catalytic activities of these catalysts were evaluated before and after the addition of potassium. Some characterization methods including X-ray diffraction and temperature programmed desorption was utilized to reveal the main reason of alkali deactivation.

  5. Research and Development on Advanced Graphite Materials. Volume 34- Oxidation-Resistance Coatings for Graphite

    Science.gov (United States)

    1963-06-01

    a very promising coating material. 1. 2. 2.4. Group V-b Oxides In Group V-b, vanadium and niobium sesquioxides have rather high melting points, 1977...Nickel Oxide NiO 1950 Aluminum Oxide AlA 2045 Niobium Oxide Nb’O, 1772 Vanadium Oxide VO, 1977 Silicon Oxide SiO, 1723 Zinc Oxide ZoO 1975 Strontium Oxide...1853 Titanium Oxide TiO, 1853 Uranium Oxide UO, Z20 Cobalt Oxide CoO 105s Vanadium Oxide VO’ 1977 Manganese Oxide MnO 1780 Yttrium Oxide 1,O Z410 Niobium

  6. The electron distribution in vanadium

    International Nuclear Information System (INIS)

    Weiss, R.J.

    1978-01-01

    It is shown that the apparent discrepancy for b.c.c. vanadium metal between the charge density and small momentum density anisotropies can be resolved by contracting the 3d triply-degenerate radial wavefunctions which point towards the nearest neighbours and expanding the 3d doubly-degenerate radial wave-functions which point towards the second-nearest neighbours. (author)

  7. Brain Metal Distribution and Neuro-Inflammatory Profiles after Chronic Vanadium Administration and Withdrawal in Mice

    Directory of Open Access Journals (Sweden)

    Oluwabusayo R. Folarin

    2017-07-01

    Full Text Available Vanadium is a potentially toxic environmental pollutant and induces oxidative damage in biological systems including the central nervous system (CNS. Its deposition in brain tissue may be involved in the pathogenesis of certain neurological disorders which after prolonged exposure can culminate into more severe pathology. Most studies on vanadium neurotoxicity have been done after acute exposure but in reality some populations are exposed for a lifetime. This work was designed to ascertain neurodegenerative consequences of chronic vanadium administration and to investigate the progressive changes in the brain after withdrawal from vanadium treatment. A total of 85 male BALB/c mice were used for the experiment and divided into three major groups of vanadium treated (intraperitoneally (i.p. injected with 3 mg/kg body weight of sodium metavanadate and sacrificed every 3 months till 18 months; matched controls; and animals that were exposed to vanadium for 3 months and thereafter the metal was withdrawn. Brain tissues were obtained after animal sacrifice. Sagittal cut sections of paraffin embedded tissue (5 μm were analyzed by the Laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS to show the absorption and distribution of vanadium metal. Also, Haematoxylin and Eosin (H&E staining of brain sections, and immunohistochemistry for Microglia (Iba-1, Astrocytes (GFAP, Neurons (Neu-N and Neu-N + 4′,6-diamidine-2′-pheynylindole dihydrochloride (Dapi Immunofluorescent labeling were observed for morphological and morphometric parameters. The LA–ICP–MS results showed progressive increase in vanadium uptake with time in different brain regions with prediction for regions like the olfactory bulb, brain stem and cerebellum. The withdrawal brains still show presence of vanadium metal in the brain slightly more than the controls. There were morphological alterations (of the layering profile, nuclear shrinkage in the prefrontal

  8. Effects of a vanadium post-metallocene catalyst-induced polymer backbone inhomogeneity on UV oxidative degradation of the resulting polyethylene film

    KAUST Repository

    Atiqullah, M.

    2012-07-01

    A Group 5 post-metallocene precatalyst, (ONO)VCl(THF) 2 (ONO = a bis(phenolate)pyridine LX 2 pincer ligand), activated with modified methylaluminoxane (MMAO-3A) produced a linear ethylene homopolymer (nm-HomoPE)and an unusual inhomogeneous copolymer (nm-CopolyPE) with 1-hexene having very low backbone unsaturation. The nm-CopolyPE inhomogeneity was reflected in the distributions of short chain branches, 1-hexene composition, and methylene sequence length. The 1-hexene incorporation into the polyethylene backbone strongly depended on the molecular weight of the growing polymer chain. (ONO)VCl(THF) 2, because of site diversity and easier removal of a tertiary (vs. a secondary) hydrogen, produced a skewed short chain branching (SCB) profile, incorporating 1-hexene more efficiently in the low molecular weight region than in the high molecular weight region. The significant decrease in molecular weight by 1-hexene showed that the (ONO)VCl(THF) 2 catalytic sites were also highly responsive to chain-transfer directly to 1-hexene itself, producing vinyl and trans-vinylene termini. Subsequently, the effect of backbone inhomogeneity on the UV oxidative degradation of films made from both polyethylenes was investigated. The major functional group accumulated in the branched nm-CopolyPE film was carbonyl followed by carboxyl, then vinyl/ester, whereas that in the linear nm-HomoPE film was carboxyl. However, (carbonyl, carboxyl, vinyl, and ester) nm-CopolyPE film >> (carboxyl) nm-HomoPE film). The distributions of the tertiary C-H sites and methylene sequence length in the branched nm-CopolyPE film enhanced abstraction of H, decomposition of hydroperoxide group ROOH, and generation of carbonyl compounds as compared with those in the linear nm-HomoPE film. This clearly establishes the role played by the backbone inhomogeneity. The effect of short chain branches and sequence length distributions on peak melting temperature T pm, and most probably lamellar thickness L o, was

  9. Potential use of vanadium compounds in therapeutics.

    Science.gov (United States)

    Barrio, D A; Etcheverry, S B

    2010-01-01

    Vanadium is a trace element present in practically all cells in plants and animals. While the essentiality of vanadium for human beings remains to be well established, vanadium has become an increasingly important environmental metal. Vanadium compounds exert a variety of biological activities and responses. At pharmacological doses, vanadium compounds display relevant biological actions such as insulin and growth factor mimetic or enhancing effects, as well as osteogenic and cardioprotective activity. On the other hand, depending on the nature of compounds and their concentrations, toxicological actions and adverse side effects may also be shown. Nevertheless, the toxic effects may be useful to develop new antitumoral drugs. In this review, the authors summarize current knowledge and new advances on in vitro and in vivo effects of inorganic and organically-chelated vanadium compounds. The effects of vanadium derivatives on some cellular signaling pathways related to different diseases are compiled. In particular, the pathways relevant to the insulin mimetic, osteogenic, cadioprotective and antitumoral actions of vanadium compounds have been comprehensively reviewed. The knowledge of these intracellular signaling pathways may facilitate the rational design of new vanadium compounds with promising therapeutic applications as well as the understanding of secondary side effects derived from the use of vanadium as a therapeutic agent.

  10. NEXAFS characterization and reactivity studies of bimetallic vanadium molybdenum oxynitride hydrotreating catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kapoor, R.; Oyama, S.T. [Virginia Polytechnic Inst., Blacksburg, VA (United States); Fruehberger, B.; Chen, J.G. [Exxon Research and Engineering Company, Annandale, NJ (United States)

    1997-02-27

    The surface and bulk compositions of vanadium molybdenum oxynitride (V{sub 2}MoO{sub 1.7}N{sub 2.4}), prepared by temperature-programmed reaction (TPR) of vanadium molybdenum oxide (V{sub 2}MoO{sub 8}) with ammonia, have been characterized using near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The NEXAFS data were recorded at the K-edges of nitrogen and oxygen, the L-edge of vanadium, and the M-edge of molybdenum. The nitrogen K-edge region of V-Mo oxynitride shows the characteristic NEXAFS features of early-transition-metal nitrides, although these features are different from those of either VN or Mo{sub 2}N. Furthermore, comparison of the electron yield and fluorescence yield measurements also reveals that the oxidation state is different for vanadium near the surface region and for vanadium in the bulk, which is estimated to be 2.8 {+-} 0.3 and 3.8 {+-} 0.3, respectively. The oxidation state of bulk molybdenum is also estimated to be 4.4 {+-} 0.3. The X-ray diffraction pattern shows that the bulk phase of the bimetallic oxide is different from the pure monometallic oxide phases but the oxynitride has a cubic structure that resembles the pure vanadium and molybdenum nitride phases. The V-Mo oxide as prepared shows a preferential orientation of [001] crystallographic planes which is lost during the nitridation process. This shows that the solid state transformation V{sub 2}MoO{sub 8} {yields} V{sub 2}MoO{sub 1.7}N{sub 2.4} is not topotactic. 27 refs., 8 figs., 1 tab.

  11. Cation-Induced Coiling of Vanadium Pentoxide Nanobelts

    Directory of Open Access Journals (Sweden)

    Liu Jun

    2010-01-01

    Full Text Available Abstract Single-crystalline V2O5·xH2O nanorings and microloops were chemically assembled via an ion-induced chemical spinning route in the designed hydrothermal system. The morphology and structure of products were investigated by means of scanning electron microscopy (SEM and transmission electron microscopy (TEM. X-ray powder diffraction (XRD measurement, energy-dispersive X-ray spectroscopy (EDS microanalysis and thermal gravimetric analysis (TGA revealed that the composition of nanorings and microloops is V2O5·1·1H2O. For these oxide nanorings and microloops, the cation-induced coiling growth mechanism of vanadium pentoxide nanobelts has been proposed on the basis of crystallographic structure of vanadium pentoxide. Our proposed chemical spinning process and the rational solution-phase synthesis route can also be extended to prepare novel 1D materials with layered or more complex structures.

  12. Chloride channel in vanadocytes of a vanadium-rich ascidian Ascidia sydneiensis samea.

    Science.gov (United States)

    Ueki, Tatsuya; Yamaguchi, Nobuo; Michibata, Hitoshi

    2003-09-01

    Ascidians, so-called sea squirts, can accumulate high levels of vanadium in the vacuoles of signet ring cells, which are one type of ascidian blood cell and are also called vanadocytes. In addition to containing high concentrations of vanadium in the +3 oxidation state, the proton concentrations in vanadocyte vacuoles are extremely high. In order to elucidate the entire mechanism of the accumulation and reduction of vanadium by ascidian vanadocytes, it is necessary to clarify the participation of anions, which might be involved as counter ions in the active accumulation of both vanadium and protons. We examined the chloride channel, since chloride ions are necessary for the acidification of intracellular vesicles and coexist with H(+)-ATPase. We cloned a cDNA encoding a chloride channel from blood cells of a vanadium-rich ascidian, Ascidia sydneiensis samea. It encoded a 787-amino-acid protein, which showed striking similarity to mammalian ClC3/4/5-type chloride channels. Using a whole-mount in situ hybridization method that we developed for ascidian blood cells, the chloride channel was revealed to be transcribed in vanadocytes, suggesting its participation in the process of vanadium accumulation.

  13. Investigation of crossover processes in a unitized bidirectional vanadium/air redox flow battery

    Science.gov (United States)

    grosse Austing, Jan; Nunes Kirchner, Carolina; Komsiyska, Lidiya; Wittstock, Gunther

    2016-02-01

    In this paper the losses in coulombic efficiency are investigated for a vanadium/air redox flow battery (VARFB) comprising a two-layered positive electrode. Ultraviolet/visible (UV/Vis) spectroscopy is used to monitor the concentrations cV2+ and cV3+ during operation. The most likely cause for the largest part of the coulombic losses is the permeation of oxygen from the positive to the negative electrode followed by an oxidation of V2+ to V3+. The total vanadium crossover is followed by inductively coupled plasma mass spectroscopy (ICP-MS) analysis of the positive electrolyte after one VARFB cycle. During one cycle 6% of the vanadium species initially present in the negative electrolyte are transferred to the positive electrolyte, which can account at most for 20% of the coulombic losses. The diffusion coefficients of V2+ and V3+ through Nafion® 117 are determined as DV2+ ,N 117 = 9.05 ·10-6 cm2 min-1 and DV3+ ,N 117 = 4.35 ·10-6 cm2 min-1 and are used to calculate vanadium crossover due to diffusion which allows differentiation between vanadium crossover due to diffusion and migration/electroosmotic convection. In order to optimize coulombic efficiency of VARFB, membranes need to be designed with reduced oxygen permeation and vanadium crossover.

  14. Structural, physical and electrochemical characteristics of a vanadium oxysulfide, a cathode material for lithium batteries

    Science.gov (United States)

    Ouvrard, G.; Tchangbédji, G.; Deniard, P.; Prouzet, E.

    A vanadium oxysulfide is obtained by a reaction between water solutions of a vanadyl salt and sodium sulfide at room temperature. After drying under mild conditions, the formulation of this phase is V 2O 3S·3H 2O. Thermogravimetric analyses show that it is not possible to remove completely water without losing sulfur. This is in agreement with proton nuclear magnetic resonance experiments which prove that water molecules are tightly bonded to vanadium. Magnetic susceptibility and X-ray absorption spectroscopy measurements allow to define the oxidation states of vanadium and sulfur, (IV) and (-II) respectively. From extended X-ray absorption fine structure spectroscopy at the vanadium K edge and infrared spectroscopy, the local structure around vanadium can be defined as a distorted octahedron, with a vanadyl bond and an opposite sulfur atom. Magnetic susceptibility and X-ray absorption spectroscopy measurements on chemically lithiated compounds show a complex charge transfer from lithium to the host structure upon lithium intercalation. If it appears that vanadium atoms are reduced, a possible role of sulfur atoms in the redox process has to be considered. Cycling tests of lithium batteries whose positive consists of oxysulfide are promising with 70 cycles under a regime of {C}/{8}, without noticeable loss in capacity of 120 Ah/kg.

  15. Biochemical and medical importance of vanadium compounds.

    Science.gov (United States)

    Korbecki, Jan; Baranowska-Bosiacka, Irena; Gutowska, Izabela; Chlubek, Dariusz

    2012-01-01

    Vanadium belongs to the group of transition metals and is present in the air and soil contaminants in large urban agglomerations due to combustion of fossil fuels. It forms numerous inorganic compounds (vanadyl sulfate, sodium metavanadate, sodium orthovanadate, vanadium pentoxide) as well as complexes with organic compounds (BMOV, BEOV, METVAN). Depending on the research model, vanadium compounds exhibit antitumor or carcinogenic properties. Vanadium compounds generate ROS as a result of Fenton's reaction or of the reaction with atmospheric oxygen. They inactivate the Cdc25B(2) phosphatase and lead to degradation of Cdc25C, which induces G(2)/M phase arrest. In cells, vanadium compounds activate numerous signaling pathways and transcription factors, including PI3K-PKB/Akt-mTOR, NF-κB, MEK1/2-ERK, that cause cell survival or increased expression and release of VEGF. Vanadium compounds inhibit p53-dependent apoptosis and promote entry into the S phase of cells containing functional p53 protein. In addition, vanadium compounds, in particular organic derivatives, have insulin-mimetic and antidiabetic properties. Vanadium compounds lower blood glucose levels in animals and in clinical trials. They also inhibit the activity of protein tyrosine phosphatase 1B. By activating the PI3K-PKB/Akt pathway, vanadium compaunds increase the cellular uptake of glucose by the GLUT4 transporter. The PKB/Akt pathway is also used to inactivate glycogen synthase kinase-3. The impact of vanadium compounds on inflammatory reactions has not been fully studied. Vanadium pentoxide causes expression of COX-2 and the release of proinflammatory cytokines in a human lung fibroblast model. Other vanadium compounds activate NF-κB in macrophages by activating IKKβ.

  16. Determination of vanadium in sea water by graphite furnace atomic absorption spectrometry with a tube coated with pyrolytic graphite

    International Nuclear Information System (INIS)

    Shimizu, Tokuo; Sakai, Kaoru

    1981-01-01

    The trace amount of vanadium in sea water was determined by graphite furnace atomic absorption spectrometry with a tube coated with pyrolytic graphite. To correct the background absorption, a deuterium lamp with a higher-brilliant thermal cathode was used. The sensitivity for vanadium increased 10 -- 20 fold by the use of the tube coated with pyrolytic graphite, and the utility lifetime of the tube was greatly extended. Vanadium(V) - 4-(2-pyridylazo)resorcinol (PAR) complexes were extracted into chloroform as an ion-pair with benzyldimethyltetradecylammonium (Zephiramine) cation alternatively. The sample of sea water, which was made to 0.1 N in sulfuric acid and 0.1% in hydrogen peroxide, was loaded onto the column of Dowex 1-X 4 resin (SO 4 2- -form). Vanadium was then eluted from the resin with 1 N sulfuric acid-0.1% hydrogen peroxide or 1 N hydrochloric acid-0.1% hydrogen peroxide evaporated to dry. After dissolution of the elute in 0.2 N nitric acid, vanadium was extracted. Secondly, the sample of sea water was adjusted to pH 5.0, and loaded onto the column of Chelex-100 resin. Vanadium was eluted from the resin with 2 N ammonia. The above two methods took much time, but the coprecipitation method was not so and recommended for the determination of vanadium in sea water. Vanadium was coprecipitated with iron(III) hydroxide-hydrous titanium(IV) oxide at pH 6.0. The precipitate was digested with nitric acid-hydrogen peroxide. The solution was diluted to 50 ml with water. The resulting solutions were employed to determine the vanadium concentration by the graphite furnace atomic absorption measurement. The trace amounts of vanadium in various kinds of the coastal sea water were determined by the coprecipitation method. (author)

  17. Solvothermal synthesis of vanadium phosphates in the form of xerogels, aerogels and mesostructures

    Energy Technology Data Exchange (ETDEWEB)

    Sydorchuk, V.; Zazhigalov, V. [Institute of Sorption and Endoecology, National Academy of Sciences of Ukraine, 13 General Naumov Str., Kyiv 03164 (Ukraine); Khalameida, S., E-mail: svkhal@ukr.net [Institute of Sorption and Endoecology, National Academy of Sciences of Ukraine, 13 General Naumov Str., Kyiv 03164 (Ukraine); Diyuk, E. [Institute of Sorption and Endoecology, National Academy of Sciences of Ukraine, 13 General Naumov Str., Kyiv 03164 (Ukraine); Skubiszewska-Zieba, J.; Leboda, R. [Faculty of Chemistry, Maria Curie-Sklodowska University, Maria Curie-Sklodowska Sq. 3, 20-031 Lublin (Poland); Kuznetsova, L. [Institute of Sorption and Endoecology, National Academy of Sciences of Ukraine, 13 General Naumov Str., Kyiv 03164 (Ukraine)

    2010-09-15

    Regularities and peculiarities of physicochemical changes, first of all phase transformations, during solvothermal treatment (with conventional and microwave heating) of the vanadium pentoxide and orthophosphoric acid mixture in organic solvents in the presence of reducing agents have been studied. Hemihydrate of vanadium hydrophosphate - the precursor of vanadium pyrophosphate, the active phase for n-butane to maleic anhydride oxidation, and ion exchanger with variable physicochemical characteristics, i.e. crystal structure, specific surface area, crystallite size and acidic properties - has been synthesized in the temperature range 170-200 {sup o}C. The obtained phases were examined using XRD, DTA-TG, SEM, FTIR spectroscopy, nitrogen adsorption as well as gas chromatographic determination of acidity through organic bases adsorption. The catalytic activity of prepared samples for n-butane oxidation has been investigated.

  18. Characterization of Vanadium Flow Battery

    DEFF Research Database (Denmark)

    Bindner, Henrik W.; Krog Ekman, Claus; Gehrke, Oliver

    This report summarizes the work done at Risø-DTU testing a vanadium flow battery as part of the project “Characterisation of Vanadium Batteries” (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery...... has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risø DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration...... of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses...

  19. The therapeutic potential of insulin-mimetic vanadium complexes.

    Science.gov (United States)

    Sakurai, Hiromu; Yasui, Hiroyuki; Adachi, Yusuke

    2003-07-01

    Throughout the world, the number of patients suffering from diabetes mellitus (DM) is increasing on a daily basis, probably due to change in lifestyle. DM is mainly classified as either insulin-dependent Type 1 or non-insulin-dependent Type 2, according to the definition of WHO. To treat DM, which has many severe complications, several types of insulin preparations and synthetic drugs for Type 1 and Type 2 DM, respectively, have been developed and are in clinical use. However, there are several problems concerning the insulin preparations and synthetic drugs, such as physical and mental pain due to daily insulin injections and defects involving side effects, respectively. Consequently, a new class of therapeutic agents is anticipated. For this purpose, vanadium-containing complexes are expected to treat or improve both types of DM by using unique characteristics of the transition metal. In this article, the current state of research on insulin-mimetic vanadium complexes are reviewed, with special focus on the paramagnetic vanadyl (+4 oxidation state of vanadium) complexes with different coordination modes. To analyse the blood glucose-lowering effects of the vanadyl complexes, new results on the organ distribution and pharmacokinetic analysis of the vanadyl state in the blood of rats are also described.

  20. Investigation of the Formation of Layered Nanostructure of Vanadium Xerogel

    Directory of Open Access Journals (Sweden)

    M. S. Markametova

    2014-01-01

    Full Text Available The paper presents the results of a study of vanadium xerogel synthesized by sol-gel method. It shows that, during the aging process in gel formation, a layered fibrous chain structure of V–O occurs at the nanoscale. Highly anisotropic particles, similar in size to the “tapes” of vanadium oxide gel, were found on the surface of partially ordered layers. IR spectroscopic analyses of groups of V=O and of V–O bonds suggest that the high degree of order in the films is related to the fact that one of the water molecules is found to be short in double bonded V=O. Consequently, the growth chains take place predominantly in the plane equivalent to OH groups. Most of the VO–H consist of twisted (spiral vanadium oxygen layers and have the morphology of tubes, the ends of which are open. Owing to such morphology of VO–H, significant structural flexibility is observed, which distinguishes them not only from carbon, but also from most other nanotubes.

  1. VANADIUM CHEMISTRY ESSENTIALS FOR TREATMENT STUDIES

    Science.gov (United States)

    The importance of vanadium occurrence and treatment in drinking water has been elevated by its inclusion in the Contaminant Candidate List. Though it is still too early to know the nature of new regulatory requirements for vanadium, if indeed it becomes regulated, a substantial u...

  2. Temperature dependence of thermal conductivity of vanadium ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 23; Issue 5. Temperature dependence of thermal conductivity of vanadium substituted BPSCCO system between 10 and 150 K. A K Dhami T K ... Keywords. Thermal conductivity; high temperature superconductors; vanadium substitution; electron + phonon approach.

  3. 76 FR 78888 - Final Results of Expedited Sunset Review: Ferrovanadium and Nitrided Vanadium From Russia

    Science.gov (United States)

    2011-12-20

    ...- bearing raw materials, such as slag, boiler residues, fly ash, and vanadium oxides. The products subject... or recurrence of dumping at the following weighted- average percentage margins: Margin Exporter/Manufacturer Percentage Galt Alloys, Inc 3.75 Gesellschaft f[uuml]r Elektrometallurgie m.b.H. (and its 11.72...

  4. Fast imaging of laser induced plasma emission of vanadium dioxide (VO2) target

    CSIR Research Space (South Africa)

    Masina, BN

    2013-10-01

    Full Text Available The main objective of this study is to fully optimise the synthesis of vanadium oxide nanostructures using pulsed laser deposition. We will attempt to realise this by studying the mechanism of the plasma formation and expansion during the pulsed...

  5. 77 FR 54897 - Ferrovanadium and Nitrided Vanadium from the Russian Federation: Revocation of Antidumping Duty...

    Science.gov (United States)

    2012-09-06

    ...: October 13, 2011. FOR FURTHER INFORMATION CONTACT: David Goldberger or Rebecca Trainor, AD/CVD Operations, Office 2, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th...- bearing raw materials, such as slag, boiler residues, fly ash, and vanadium oxides. The products subject...

  6. Tritium removal using vanadium hydride

    International Nuclear Information System (INIS)

    Hill, F.B.; Wong, Y.W.; Chan, Y.N.

    1978-01-01

    The results of an initial examination of the feasibility of separation of tritium from gaseous protium-tritium mixtures using vanadium hydride in cyclic processes is reported. Interest was drawn to the vanadium-hydrogen system because of the so-called inverse isotope effect exhibited by this system. Thus the tritide is more stable than the protide, a fact which makes the system attractive for removal of tritium from a mixture in which the light isotope predominates. The initial results of three phases of the research program are reported, dealing with studies of the equilibrium and kinetics properties of isotope exchange, development of an equilibrium theory of isotope separation via heatless adsorption, and experiments on the performance of a single heatless adsorption stage. In the equilibrium and kinetics studies, measurements were made of pressure-composition isotherms, the HT--H 2 separation factors and rates of HT--H 2 exchange. This information was used to evaluate constants in the theory and to understand the performance of the heatless adsorption experiments. A recently developed equilibrium theory of heatless adsorption was applied to the HT--H 2 separation using vanadium hydride. Using the theory it was predicted that no separation would occur by pressure cycling wholly within the β phase but that separation would occur by cycling between the β and γ phases and using high purge-to-feed ratios. Heatless adsorption experiments conducted within the β phase led to inverse separations rather than no separation. A kinetic isotope effect may be responsible. Cycling between the β and γ phases led to separation but not to the predicted complete removal of HT from the product stream, possibly because of finite rates of exchange. Further experimental and theoretical work is suggested which may ultimately make possible assessment of the feasibility and practicability of hydrogen isotope separation by this approach

  7. Manipulating Conduction in Metal Oxide Semiconductors: Mechanism Investigation and Conductance Tuning in Doped Fe2O3 Hematite and Metal/Ga2O3/Metal Heterostructure

    Science.gov (United States)

    Zhao, Bo

    This study aims at understanding the fundamental mechanisms of conduction in several metal oxide semiconductors, namely alpha-Fe2O 3 and beta-Ga2O3, and how it could be tuned to desired values/states to enable a wide range of application. In the first effort, by adding Ti dopant, we successfully turned Fe2O3 from insulating to conductive by fabricated compositionally and structurally well-defined epitaxial alpha-(TixFe1-x)2 O3(0001) films for x ≤ 0.09. All films were grown by oxygen plasma assisted molecular beam epitaxy on Al2O3(0001) sapphire substrate with a buffer layer of Cr2O3 to relax the strain from lattice mismatch. Van der Pauw resistivity and Hall effect measurements reveal carrier concentrations between 1019 and 1020 cm-3 at room temperature and mobilities in the range of 0.1 to 0.6 cm2/V˙s. Such low mobility, unlike conventional band-conduction semiconductor, was attributed to hopping mechanism due to strong electron-phonon interaction in the lattice. More interestingly, conduction mechanism transitions from small-polaron hopping at higher temperatures to variable range hopping at lower temperatures with a transition temperature between 180 to 140 K. Consequently, by adding Ti dopant, conductive Fe 2O3 hematite thin films were achieved with a well-understood conducting mechanism that could guide further device application such as spin transistor and water splitting. In the case of Ga2O3, while having a band gap as high as 5 eV, they are usually conductive for commercially available samples due to unintentional Si doping. However, we discovered the conductance could be repeatedly switched between high resistance state and low resistance state when made into metal/Ga2O3 /metal heterostructure. However, to obtain well controlled switching process with consistent switching voltages and resistances, understanding switching mechanism is the key. In this study, we fabricated resistive switching devices utilizing a Ni/Ga2O3/Ir heterostructure. Bipolar

  8. Opposing effects of D-aspartic acid and nitric oxide on tuning of testosterone production in mallard testis during the reproductive cycle

    Directory of Open Access Journals (Sweden)

    Assisi Loredana

    2008-07-01

    Full Text Available Abstract Background D-Aspartic acid (D-Asp and nitric oxide (NO play an important role in tuning testosterone production in the gonads of male vertebrates. In particular, D-Asp promotes either the synthesis or the release of testosterone, whereas NO inhibits it. In this study, we have investigated for the first time in birds the putative effects of D-Asp and NO on testicular testosterone production in relation to two phases of the reproductive cycle of the adult captive wild-strain mallard (Anas platyrhynchos drake. It is a typical seasonal breeder and its cycle consists of a short reproductive period (RP in the spring (April-May and a non reproductive period (NRP in the summer (July, a time when the gonads are quiescent. The presence and the localization of D-Asp and NO in the testis and the trends of D-Asp, NO and testosterone levels were assessed during the main phases of the bird's reproductive cycle. Furthermore, in vitro experiments revealed the direct effect of exogenously administered D-Asp and NO on testosterone steroidogenesis. Methods By using immunohistochemical (IHC techniques, we studied the presence and the distributional pattern of D-Asp and NO in the testes of RP and NRP drakes. D-Asp levels were evaluated by an enzymatic method, whereas NO content, via nitrite, was assessed using biochemical measurements. Finally, immunoenzymatic techniques determined testicular testosterone levels. Results IHC analyses revealed the presence of D-Asp and NO in Leydig cells. The distributional pattern of both molecules was in some way correlated to the steroidogenic pathway, which is involved in autocrine testosterone production. Indeed, whereas NO was present only during the NRP, D-Asp was almost exclusively present during the RP. Consistently, the high testosterone testicular content occurring during RP was coupled to a high D-Asp level and a low NO content in the gonad. By contrast, in sexually inactive drakes (NRP, the low testosterone

  9. Critical V2O5/TeO2 ratio inducing abrupt property changes in vanadium tellurite glasses

    DEFF Research Database (Denmark)

    Kjeldsen, Jonas; Rodrigues, Ana C. M.; Mossin, Susanne

    2014-01-01

    Transition metal containing glasses have unique electrical properties and are therefore often used for electrochemical applications, such as in batteries. Among oxide glasses, vanadium tellurite glasses exhibit the highest electronic conductivity and thus the high potential for applications....... In this work, we investigate how the dynamic and physical properties vary with composition in the vanadium tellurite system. The results show that there exists a critical V2O5 concentration of 45 mol %, above which the local structure is subjected to a drastic change with increasing V2O5, leading to abrupt...... changes in both hardness and liquid fragility. Electronic conductivity does not follow the expected correlation to the valence state of the vanadium as predicted by the Mott-Austin equation but shows a linear correlation to the mean distance between vanadium ions. These findings could contribute...

  10. Studies on electronic spectrum and electron spin resonance of vanadium (IV) complexes with organophosphorus compounds and high molecular weight amines

    International Nuclear Information System (INIS)

    Sato, Taichi; Nakamura, Takato

    1981-01-01

    In the extraction of vanadium (IV) from aqueous solutions containing hydrochloric acid and/or a mixture of hydrochloric acid and lithium chloride by bis(2-ethylhexyl) hydrogenphosphate (DEHPA; HX), trioctylmethylammonium chloride (Aliquat-336), trioctylamine (TOA), trioctylphosphine oxide (TOPO) and tributyl phosphate (TBP), the complexes formed in the organic phases have been examined by spectrophotometry and electron spin resonance spectroscopy. It is found that in the extraction by DEHPA, the vanadium in the organic phase exists as the monomeric species, VO(X 2 H) 2 , or the polymeric one, (VOX 2 )sub(n), and that in the extractions by Aliquat-336, TOA, TOPO, and TBP, tetravalent vanadium complexes are stable in the organic phases extracted from a mixed solution of hydrochloric acid and lithium chloride, while complexes containing pentavalent vanadium and VOV 4+ ions are formed in the organic phases extracted from hydrochloric acid solutions. (author)

  11. Asymmetric Sulfoxidation Catalyzed by a Vanadium-Containing Bromoperoxidase.

    Science.gov (United States)

    Andersson, Malin; Willetts, Andrew; Allenmark, Stig

    1997-11-28

    A vanadium-containing bromoperoxidase (VBrPO) from the alga Corallina officinalis has been shown to catalyze the stereoselective oxidation of some aromatic bicyclic sulfides to the corresponding (S)-sulfoxides in high (up to 91%) ee. Hydrogen peroxide was found to have a large effect on the catalyzed reaction, most likely due to an inhibition of VBrPO. High optical and chemical yields were found to be favored by a continuous slow addition of hydrogen peroxide to keep a low excess. The reaction gives no overoxidation to sulfone, and its stereochemistry is the opposite as compared to that previously found with the heme-containing chloroperoxidase (CPO) from Caldariomyces fumago.

  12. Practical tuning for Oracle

    International Nuclear Information System (INIS)

    Kwon, Sun Yong

    2005-02-01

    This book deals with tuning for oracle application, which consists of twenty two chapters. These are the contents of this book : what is tuning?, procedure of tuning, collection of performance data using stats pack, collection of performance data in real time, disk IO dispersion, architecture on Index, partition and IOT, optimization of cluster Factor, optimizer, analysis on plan of operation, selection of Index, tuning of Index, parallel processing architecture, DML, analytic function join method, join type, analysis of application, Lock architecture, SGA architecture and wait event and segment tuning.

  13. Vanadium-catalyzed epoxidations of olefinic alcohols in liquid carbon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Pesiri, D.R.; Morita, D.K.; Walker, T.; Tumas, W.

    1999-11-22

    The selective epoxidation of olefinic alcohols with t-BuOOH in the presence of vanadium catalysts proceeds in liquid carbon dioxide with high conversions and selectivities. Rates measured in liquid CO{sub 2} for the oxovanadium(V) triisopropoxide catalyzed epoxidation of allylic and homoallylic alcohols using tert-butyl hydroperoxide are comparable to those measured in methylene chloride, toluene, and n-hexane. The reactivity of the vanadium(IV) bis(acetylacetonato) oxide catalyst in liquid CO{sub 2} was found to be substantially lower than in organic solvents, presumably due to its low solubility in CO{sub 2}. Highly fluorinated acac-type ligands increased the catalytic reactivity of VO(acac){sub 2}-catalyzed epoxidations by enhancing catalyst precursor solubility. Heterogeneous epoxidation reactions were also carried out in liquid CO{sub 2} using vanadium complexes supported on cation-exchange polymers.

  14. Work function tuning and fluorescence enhancement of hydrogen annealed Ag-doped Al-rich zinc oxide nanostructures using a sol–gel process

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Firoz; Baek, Seong-Ho [Energy Research Division, Daegu Gyeongbuk Institute of Science & Technology (DGIST), 50-1 Sang-Ri, Hyeonpung-Myeon, Dalseong-Gun, Daegu 711-873 (Korea, Republic of); Lee, Jae Young [School of Mechanical and Control Engineering, Handong Global University, 558 Handong-Ro, Heunghae-Eub, Buk-Ku, Pohang, Gyung-Buk 791-708 (Korea, Republic of); Kim, Jae Hyun, E-mail: jaehyun@dgist.ac.kr [Energy Research Division, Daegu Gyeongbuk Institute of Science & Technology (DGIST), 50-1 Sang-Ri, Hyeonpung-Myeon, Dalseong-Gun, Daegu 711-873 (Korea, Republic of)

    2015-10-25

    Effect of incorporation of Ag on the structural, optical, electrical, and fluorescence properties of sol–gel derived Al-rich zinc oxide (ZnO:Al:Ag) nanostructured films was studied. The E{sub g} of the film slightly decreased to a minimal value with Ag doping, and was found to be about 3.65 eV for R{sub Ag/Zn} = 1% from its initial value of 3.72 eV (R{sub Ag/Zn} = 0%). The WF sudden increased to a maximal value of 5.12 eV with Ag doping (for R{sub Ag/Zn} = 1%) from its initial value of 4.73 eV for R{sub Ag/Zn} = 0% due to substitution of Ag into Zn sites until saturation was achieved (R{sub Ag/Zn} = 1%). After more Ag doping, WF started to decrease and finally, reached a value of 4.81 eV for R{sub Ag/Zn} = 3% because of the formation of an impurity-defect energy level below the intrinsic Fermi level of ZnO. With Ag-doping, the current increased up to R{sub Ag/Zn} = 1% due to the increase in carrier density. For R{sub Ag/Zn} = 3% doping, the current density started to increase due to the influence of metallic Ag. The defective peak position was blue shifted, with increased Ag-doping, from 536 nm (R{sub Ag/Zn} = 1%) to 527 nm for R{sub Ag/Zn} = 2% due to the sizes of the Ag{sup +} and Zn{sup 2+} ions. The FL defective peak intensity (I{sub D}) in the green region increased with the concentration of Ag used for doping, up to R{sub Ag/Zn} = 2%. The enhancement in the I{sub D} may be due to charge difference between the Zn{sup 2+} ions, caused by Ag{sup +} ions. - Graphical abstract: The effect of incorporation of Ag doping on the structural, optical, electrical, and fluorescence properties of sol–gel derived Al-rich zinc oxide (ZnO:Al:Ag) nanostructured films was studied. By Ag-doping, the lowest R{sub λ} is blue shifted to R{sub Ag/Zn} = 2% and finally red shifted for R{sub Ag/Zn} = 3% due to variation of optical thickness of the film. The E{sub g} of the film slightly decreased to a minimal value with Ag doping, and was found to be about 3.65 eV for R{sub Ag

  15. Study on wear resistance of vanadium alloying compacted/vermicular graphite cast iron

    International Nuclear Information System (INIS)

    Park, Yoon Woo

    1987-01-01

    Wear resistance of the Compacted/Vermicular graphite cast irons was studied by changing the vanadium content in the cast irons. The results obtained in this work are summarized as follows. 1. When the same amount of vanadium was added to the flake graphite cast iron, spheroidal graphitecast iron and Compacted/Vermicular graphite cast iron, spheroidal graphite cast iron and Compacted/Vermicular graphite cast iron wear resistance decreased in following sequence, that is, flake graphite cast iron> spheroidal graphite cast iron>Compacted/Vermicular graphite cast iron. 2. Addition of vanadium to the Compacted/Vermicular cast iron leaded to a remarkable increase in hardness because it made the amount of pearlite in matrix increase. 3. Addition of vanadium to the compacted/Vermicular graphite cast iron significantly enhanced wear resistance and the maximum resistance was achieved at about 0.36% vanadium. 4. The maximum amount of wear apppeared at sliding speed of about 1.4m/sec and wear mode was considered to be oxidation abrasion from the observation of wear tracks. (Author)

  16. Electrochemical behaviour of a vanadium anode in phosphoric acid and phosphate solutions

    International Nuclear Information System (INIS)

    Alonzo, V.; Darchen, A.; Fur, E. Le; Pivan, J.Y.

    2006-01-01

    Anodic polarisation of a vanadium electrode has been studied in H 3 PO 4 solutions and some phosphate solutions: LiH 2 PO 4 , NaH 2 PO 4 , KH 2 PO 4 and NH 4 H 2 PO 4 . The anodic behaviour of a vanadium electrode showed similarities in weak concentrated H 3 PO 4 , in LiH 2 PO 4 and NaH 2 PO 4 solutions: the polarisation curve exhibited a current peak followed by current oscillations and then a current plateau. Concentrated H 3 PO 4 , 1 M KH 2 PO 4 and NH 4 H 2 PO 4 solutions involved vanadium passivation with a very slight current density plateau. Yellow compound identified to VOPO 4 .2H 2 O was obtained after controlled potential oxidation of vanadium in 5-10 M H 3 PO 4 . Green products were obtained in 1 M phosphate solutions and in 1-3 M H 3 PO 4 on vanadium anode after controlled potential electrolysis. All these vanadophosphate compounds contained the monovalent cation which was present in the solution

  17. The influence of calcium, magnesium, phosphorus and silica on vanadium precipitation in acidic sulfate solutions

    Directory of Open Access Journals (Sweden)

    A. H. Martins

    2000-06-01

    Full Text Available The experimental research work was carried out in accordance with the Factorial Design Statistical Method to evaluate and analyze the influence of calcium, magnesium, silica and phosphorus on the precipitation of vanadates. Precipitation was performed by neutralization with H2SO4 of alkaline aqueous solutions containing vanadium pentoxide (V2O5 at 60± 2ºC. The experimental responses measured were percent of vanadium recovery and vanadium pentoxide content in the precipitate. These impurities are considered representative of those present in a leach liquor from the ore obtained at Campo Alegre de Lourdes (Brazil. The operational variables in this work were used under optimum conditions as determined by the statistical approach. Among the impurities under study, phosphorus exhibited the highest negative influence on the experimental responses. Phosphorus diminished the percent of vanadium recovered from 98.9 to 34.5 and the vanadium oxide content in the precipitate from 91.2 % to 39.3 %.

  18. Electrochemical lithium intercalation into vanadium pentoxide xerogel film electrode

    Energy Technology Data Exchange (ETDEWEB)

    Pyun, Su Il; Bae, Joon Sung [Korea Advanced Inst. of Science and Technology, Daejon (Korea, Republic of). Dept. of Materials Science and Engineering

    1997-10-01

    The lithium-ion transport in vanadium pentoxide xerogel film electrodes has been investigated by using cyclic voltammetry and electrochemical impedance spectroscopy. The oxide xerogel film electrodes were prepared by spin-coating a viscous gel on an indium tin oxide (ITO) substrate. The spin-coated xerogel films were dried under vacuum at 130 and 270 C, respectively. The lithium intercalation into the xerogel film electrode dried at 270 C is limited by the interfacial reaction at the electrolyte/electrode interface rather than the lithium-ion transport in the oxide electrode. On the other hand, lithium intercalation into the film electrode dried at 130 C is largely limited by the lithium transport in the oxide film, and the chemical diffusivity of the lithium ion in the oxide film was determined to decrease from 10{sup -10} to 10{sup -12} cm{sup 2} s{sup -1} as the electrode potential of the oxide film fell from 3.0 to 2.2 V{sub Li/Li{sup +}}. The tranition of the diffusion-controlled intercalation to the interfacial reaction-controlled intercalation into the oxide xerogel film with decreasing drying temperature was explained in terms of the modification of the oxide lattice to a more open-structured lattice by structural modification of the oxide film by water molecules incorporated into the film. (orig.)

  19. Stress induced reorientation of vanadium hydride

    International Nuclear Information System (INIS)

    Beardsley, M.B.

    1977-10-01

    The critical stress for the reorientation of vanadium hydride was determined for the temperature range 180 0 to 280 0 K using flat tensile samples containing 50 to 500 ppM hydrogen by weight. The critical stress was observed to vary from a half to a third of the macroscopic yield stress of pure vanadium over the temperature range. The vanadium hydride could not be stress induced to precipitate above its stress-free precipitation temperature by uniaxial tensile stresses or triaxial tensile stresses induced by a notch

  20. Effects of Basicity and MgO in Slag on the Behaviors of Smelting Vanadium Titanomagnetite in the Direct Reduction-Electric Furnace Process

    Directory of Open Access Journals (Sweden)

    Tao Jiang

    2016-05-01

    Full Text Available The effects of basicity and MgO content on reduction behavior and separation of iron and slag during smelting vanadium titanomagnetite by electric furnace were investigated. The reduction behaviors affect the separation of iron and slag in the direct reduction-electric furnace process. The recovery rates of Fe, V, and Ti grades in iron were analyzed to determine the effects of basicity and MgO content on the reduction of iron oxides, vanadium oxides, and titanium oxides. The chemical compositions of vanadium-bearing iron and main phases of titanium slag were detected by XRF and XRD, respectively. The results show that the higher level of basicity is beneficial to the reduction ofiron oxides and vanadium oxides, and titanium content dropped in molten iron with the increasing basicity. As the content of MgO increased, the recovery rate of Fe increased slightly but the recovery rate of V increased considerably. The grades of Ti in molten iron were at a low level without significant change when MgO content was below 11%, but increased as MgO content increased to 12.75%. The optimum conditions for smelting vanadium titanomagnetite were about 11.38% content of MgO and quaternary basicity was about 1.10. The product, vanadium-bearing iron, can be applied in the converter steelmaking process, and titanium slag containing 50.34% TiO2 can be used by the acid leaching method.

  1. Vanadium-binding proteins (vanabins) from a vanadium-rich ascidian Ascidia sydneiensis samea.

    Science.gov (United States)

    Ueki, Tatsuya; Adachi, Takahiro; Kawano, Sonoko; Aoshima, Masato; Yamaguchi, Nobuo; Kanamori, Kan; Michibata, Hitoshi

    2003-04-15

    Since the beginning of the last century, it has been known that ascidians accumulate high levels of a transition metal, vanadium, in their blood cells, although the mechanism for this curious biological function remains unknown. Recently, we identified three vanadium-binding proteins (vanabins), previously denoted as vanadium-associated proteins (VAPs) [Zool. Sci. 14 (1997) 37], from the cytoplasm fraction of vanadium-containing blood cells (vanadocytes) of the vanadium-rich ascidian Ascidia sydneiensis samea. Here, we describe the cloning, expression, and analysis of the metal-binding ability of vanabins. Recombinant proteins of two independent but related vanabins, vanabin1 and vanabin2, bound to 10 and 20 vanadium(IV) ions with dissociation constants of 2.1x10(-5) and 2.3x10(-5) M, respectively. The binding of vanadium(IV) to these vanabins was inhibited by the addition of copper(II) ions, but not by magnesium(II) or molybdate(VI) ions. Vanabins are the first proteins reported to show specific binding to vanadium ions; this should provide a clue to resolving the problem regarding the selective accumulation of vanadium in ascidians.

  2. Development of analytical techniques of vanadium isotope in seawater

    Science.gov (United States)

    Huang, T.; Owens, J. D.; Sarafian, A.; Sen, I. S.; Huang, K. F.; Blusztajn, J.; Nielsen, S.

    2015-12-01

    Vanadium (V) is a transition metal with isotopes of 50V and 51V, and oxidation states of +2, +3, +4 and +5. The average concentration in seawater is 1.9 ppb, which results in a marine residence time of ~50 kyrs. Its various oxidation states make it a potential tool for investigating redox conditions in the ocean and sediments due to redox related changes in the valance state of vanadium. In turn, chemical equilibrium between different oxidation states of V will likely cause isotopic fractionation that can potentially be utilized to quantify past ocean redox states. In order to apply V isotopes as a paleo-redox tracer, it is required that we know the isotopic composition of seawater and the relation to marine sources and sinks of V. We developed a novel method for pre-concentrating V and measuring the isotope ratio in seawater samples. In our method, we used four ion exchange chromatography columns to separate vanadium from seawater matrix elements, in particular titanium and chromium, which both have an isobaric interference on 50V. The first column uses the NOBIAS resin, which effectively separates V and other transition metals from the majority of seawater matrix. Subsequent columns are identical to those utilized when separating V from silicate samples (Nielsen et al, Geostand. Geoanal. Res., 2011). The isotopic composition of the purified V is measured using a Thermo Scientific Neptune multiple collector inductively coupled plasma mass spectrometer (MC-ICP-MS) in medium resolution mode. This setup resolves all molecular interferences from masses 49, 50, 51, 52 and 53 including S-O species on mass 50. To test the new method, we spiked an open ocean seawater sample from the Bermuda Atlantic Time Series (BATS) station with 10-25 μg of Alfa Aesar vanadium solution, which has an isotopic composition of δ51V = 0 [where δ51V = 1000 × [(51V/50Vsample - 51V/50VAA)/51V/50VAA]. The average of six spiked samples is -0.03±0.19‰, which is within error of the true

  3. Homo- and heterometal complexes of oxido-metal ions with a triangular [V(V)O-MO-V(V)O] [M = V(IV) and Re(V)] core: reporting mixed-oxidation oxido-vanadium(V/IV/V) compounds with valence trapped structures.

    Science.gov (United States)

    Bhattacharya, Kisholoy; Maity, Manoranjan; Abtab, Sk Md Towsif; Majee, Mithun Chandra; Chaudhury, Muktimoy

    2013-08-19

    A new family of trinuclear homo- and heterometal complexes with a triangular [V(V)O-MO-V(V)O] (M = V(IV), 1 and 2; Re(V), 3] all-oxido-metal core have been synthesized following a single-pot protocol using compartmental Schiff-base ligands, N,N'-bis(3-hydroxysalicylidene)-diiminoalkanes/arene (H4L(1)-H4L(3)). The upper compartment of these ligands with N2O2 donor combination (Salen-type) contains either a V(IV) or a Re(V) center, while the lower compartment with O4 donor set accommodates two V(V) centers, stabilized by a terminal and a couple of bridging methoxido ligands. The compounds have been characterized by single-crystal X-ray diffraction analyses, which reveal octahedral geometry for all three metal centers in 1-3. Compound 1 crystallizes in a monoclinic space group P2(1)/c, while both 2 and 3 have more symmetric structures with orthorhombic space group Pnma that renders the vanadium(V) centers in these compounds exactly identical. In DMF solution, compound 1 displays an 8-line EPR at room temperature with and values of 1.972 and 86.61 × 10(-4) cm(-1), respectively. High-resolution X-ray photoelectron spectrum (XPS) of this compound shows a couple of bands at 515.14 and 522.14 eV due to vanadium 2p(3/2) and 2p(1/2) electrons in the oxidation states +5 and +4, respectively. All of these, together with bond valence sum (BVS) calculation, confirm the trapped-valence nature of mixed-oxidation in compounds 1 and 2. Electrochemically, compound 1 undergoes two one-electron oxidations at E(1/2) = 0.52 and 0.83 V vs Ag/AgCl reference. While the former is due to a metal-based V(IV/V) oxidation, the latter one at higher potential is most likely due to a ligand-based process involving one of the catecholate centers. A larger cavity size in the upper compartment of the ligand H4L(3) is spacious enough to accommodate Re(V) with larger size to generate a rare type of all-oxido heterotrimetallic compound (3) as established by X-ray crystallography.

  4. 6-Phosphogluconate dehydrogenase is a 45-kDa antigen recognized by S4D5, a monoclonal antibody specific to vanadocytes in the vanadium-rich ascidian Ascidia sydneiensis samea.

    Science.gov (United States)

    Uyama, T; Kinoshita, T; Takahashi, H; Satoh, N; Kanamori, K; Michibata, H

    1998-08-01

    We previously prepared a monoclonal antibody, S4D5, specific to vanadocytes, vanadium-containing blood cells, in the vanadium-rich ascidian Ascidia sydneiensis samea. Here, we demonstrate that a 45-kDa antigen recognized by S4D5 is 6-phosphogluconate dehydrogenase (6-PGDH), an enzyme of the pentose phosphate pathway, based on cDNA isolation of RNA samples from blood cells of the ascidian. Western blot analysis confirmed an abundance of 6-PGDH protein in the vanadocytes and localization of 6-PGDH in the soluble extract of the blood cells. Soluble protein exhibited a correspondingly high level of 6-PGDH enzymatic activity. Ascidians are known to selectively accumulate high levels of vanadium in vanadocytes, and the highest recorded concentration of accumulated vanadium is 350 mM, which is 10(7) times the concentration in sea water. Almost all vanadium ions are reduced to the +3 oxidation state via the +4 oxidation state in vanadocytes, indicating that reducing agents must participate in the accumulation. On the other hand, vanadium ions in the +5 oxidation state are reduced to the +4 oxidation state by the presence of NADPH in vitro. Together, these observations suggest that NADPH produced in the pentose phosphate pathway may conjugate the reduction of vanadium from the +5 oxidation state through the +4 oxidation state in vanadocytes of ascidians.

  5. Vertical Administration of Vanadium through Lactation Induces ...

    African Journals Online (AJOL)

    The work investigated the protective role of vitamin E on vanadium induced neurotoxicity. Three adult female rats were divided into three groups, A-C with each dam and her pups forming a group. Group A served as control. The dam in Group B was given 3mg/kg b.w./day of vanadium from PND 1 while the Group C dam ...

  6. Surface and bulk conductivity of vanadium dioxide

    Science.gov (United States)

    Tutov, E. A.; Manannikov, A. V.; Al-Khafaji, H. I.; Zlomanov, V. P.

    2017-03-01

    The dc and ac resistances of a TR-68 thermistor based on the vanadium dioxide film have been measured and the temperature dependence of the resistance in the semiconductor-metal transition region under adsorption has been studied. The energy band model has been proposed, which explains the anomalous response to adsorption of donor gases by the inversion of the conductivity type of vanadium dioxide surface layers.

  7. Material Strength Models for Vanadium

    Science.gov (United States)

    Pollaine, Stephen

    2005-07-01

    We have preliminary results of measurements of vanadium strength at 600 kb and 1 Mb, at strain rates between 10^7 and 10^8/s. The results are inconsistent with the Steinberg-Guinan [1] model, which is independent of strain rate, but can be made consistent with other models, such as PTW [2]. We show a variety of different strength models and compare them to the data. [1] DJ.Steinberg, S.G.Cochran, and M.W.Buinan, J. Appl. Phys. 51, 1498 (1980). [2] D.L. Preston, D.L.Tonks, and D.C.wallace, J. Appl. Phys. 93, 211 (2003). This work was performed under the auspices of the U.S. Department of Energy by the University of California, Lawrence Livermore National Laboratory under contract No. W-7405-Eng-48.

  8. Volume dependence of vanadium magnetism

    International Nuclear Information System (INIS)

    Elzain, M.E.

    1993-07-01

    The first principle discrete variational method in the spin polarized local density approximation is used to calculate the local properties of 15 atom clusters representing variable crystal size bcc vanadium. Four distinct magnetic configurations are recognized as the lattice constant varies from 5.4 to 8.4 (a.u.). At the lowest end the clusters are paramagnetic (PM) whereas at the upper end clusters are ferromagnetic (FM). In between antiferromagnetic couplings prevail. The local magnetic moment increases, in a fashion not unlike second order transitions, from zero in the PM range to non-zero values in the AFM region. Transitions between other phases are first order. The systematics of these transitions are ascribed to the general shape of the density of states. The contact magnetic hyperfine field, charge density and 3d partial occupations at the central sites are also calculated. (author). 14 refs, 3 figs, 1 tab

  9. PERI auto-tuning

    International Nuclear Information System (INIS)

    Bailey, D H; Williams, S; Chame, J; Chen, C; Hall, M; Dongarra, J; Moore, S; Seymour, K; You, H; Hollingsworth, J K; Tiwari, A; Hovland, P; Shin, J

    2008-01-01

    The enormous and growing complexity of today's high-end systems has increased the already significant challenges of obtaining high performance on equally complex scientific applications. Application scientists are faced with a daunting challenge in tuning their codes to exploit performance-enhancing architectural features. The Performance Engineering Research Institute (PERI) is working toward the goal of automating portions of the performance tuning process. This paper describes PERI's overall strategy for auto-tuning tools and recent progress in both building auto-tuning tools and demonstrating their success on kernels, some taken from large-scale applications

  10. Vanadium speciation by chromatographic separation of V(IV) and V ...

    African Journals Online (AJOL)

    A new method for vanadium speciation has been developed. The method is based on chromatographic separation of vanadium(IV) and vanadium(V) in acidic medium followed by the determination with ICP-OES. Vanadium species exist in acidic solution (pH < 3) as VO2+ for vanadium(IV) and VO2 + for vanadium(V).

  11. A UPS study of the thermal reduction of fully oxidized V2O5/TiO2(001-anatase) model catalysts

    International Nuclear Information System (INIS)

    Silversmit, G.; Poelman, H.; Depla, D.; Poelman, D.; DE Gryse, R.; Marin, G.B.; Barrett, N.

    2004-01-01

    Full text: Vanadium oxides are important catalysts in various industrial processes. Supported vanadium oxides have enhanced catalytic properties as compared to unsupported vanadium oxides. Model systems, consisting of a thin vanadium oxide layer deposited on a crystalline support, are used to study supported vanadium oxides. As calcined industrial powder systems contain V 5+ , representative model systems should also have fully oxidized vanadium oxide layers. DC magnetron sputtering in a pure O 2 atmosphere is used as deposition technique in order to develop fully oxidized V 2 O 5 /TiO 2 (001-anatase) model catalysts. Vanadium oxide layers deposited with magnetron sputtering on mineral TiO 2 (001-anatase) supports were examined with UPS (hv=150 eV) at the SA73 beamline of the S.ACO storage ring (LURE, France) by recording the valence band and the V3p, Ti3p and O2s core line spectra. Ex-situ depositions did not yield fully oxidized vanadium oxide layers. Fully oxidized vanadium oxide layers on TiO 2 (001-anatase) can be obtained by in-situ depositions. The in-situ deposited layers are gradually reduced upon irradiation with the monochromated synchrotron beam. The thermal behaviour of the V 2 O 5 /TiO 2 (001-anatase) system was studied up to approximately 240 deg C for a layer thickness of 16 Angstroms. The heating induced a reduction of the vanadium oxide layer. Furthermore, the thickness of the layers diminished by the heating: more than 8 Angstroms vanadium oxide disappeared. A re-oxidation did not restore the vanadium oxide layer completely to the V 5+ oxidation state

  12. Bioaccumulation of Vanadium in Sardinian soil

    International Nuclear Information System (INIS)

    Duras, M.G.; Biagioli, M.; Micera, G.; Panzanelli, A.; Pilo, M.I.; Piu, P.; Spano, N.; Sanna, G.; Inca Consortium, Sassari

    2006-01-01

    The aim of our research was to evaluate the bioaccumulation of Vanadium in the soil-pasture-milk chain. Hence, the concentration of this element has been measured by means of a Gfaas method in Sardinian samples of animal (bovine, ovine and goat milk) and vegetal (natural pasture and forage) origin. Also the bioavailable Vanadium amount in the pastured soil samples has been measured. the selected sampling areas were chosen on the basis of wide range of lithological typologies and different level of urbanization and industrialization. The data obtained reveal that, in all milk samples, the Vanadium amount was always below the quantification limit, Loq, 3 μg L -1 . This result indicates the absence of bioaccumulation from natural pasture to milk. Also possible correlations between the bioavailable amount of Vanadium in the soils, the total Vanadium level in the pasture and the pedagogical parameters have been discussed, as well as the influence of anthropic and geopedological contributions to the bioavailable level of Vanadium in soils [it

  13. [Insulin-mimetic property of vanadium compounds].

    Science.gov (United States)

    Korbecki, Jan; Baranowska-Bosiacka, Irena; Gutowska, Izabela; Chlubek, Dariusz

    Vanadium is a transition metal which creates a number of inorganic and organic derivatives with various organic substances. Some of these compounds have pharmaceutical significance, e.g. vanadyl cation, vanadate and bis(maltolato) oxovanadium(IV). Vanadium compounds are competence inhibitors of protein tyrosine phosphatases (PTP). They have anti-tumor properties, capable of inhibiting cell proliferation at the concentrations of several micromoles. They also display insulin-mimetic and hypoglycemic properties. As they can increase the activity of the insulin-like growth factor I receptor, they stimulate glycogen synthesis, increase the number of GLUT-4 transporters in the cell membrane and impair gluconeogenesis. In addition to their effects on sugar metabolism, vanadium compounds increase the synthesis of fatty acids, reducing the concentration of glucose in the blood. Thanks to their mitotic properties, low concentrations of vanadium compounds are also able to induce β cell regeneration. Clinical tests have shown that vanadium compounds may be used as antidiabetic drugs with low toxicity. However, the range of therapeutic concentrations is very narrow; at concentrations as low a several micromoles vanadium compounds inhibit cell proliferation and cause apoptosis, necrosis and inflammation.

  14. Recovery of Vanadium from H2SO4-HF Acidic Leaching Solution of Black Shale by Solvent Extraction and Precipitation

    Directory of Open Access Journals (Sweden)

    Xingbin Li

    2016-03-01

    Full Text Available The recovery of vanadium from sulfuric and hydrofluoric mixed acid solutions generated by the direct leaching of black shale was investigated using solvent extraction and precipitation methods. The process consisted of reduction, solvent extraction, and stripping, followed by precipitation and calcination to yield vanadium pentoxide. The influence of various operating parameters on the extraction and recovery of vanadium was studied. Vanadium (IV was selectively extracted using a mixture of 10% (v/v di(2-ethylhexylphosphoric acid and 5% (v/v tri-n-butylphosphate in sulfonated kerosene. Using six extraction and five stripping stages, the extraction efficiency for vanadium was 96.7% and the stripping efficiency was 99.7%. V2O5 with a purity of 99.52% was obtained by oxidation of the loaded strip solution and precipitation of ammonium polyvanadate at pH 1.8 to 2.2, followed by calcination of the dried precipitate at 550 °C for 2 h. It was concluded that the combination of solvent extraction and precipitation is an efficient method for the recovery of vanadium from a multi-element leach solution generated from black shale.

  15. Preliminary studies of vanadium-base alloys intended for use in fabrication of cans for fast reactors

    International Nuclear Information System (INIS)

    Conte, M.

    1967-03-01

    Preliminary research has been carried out on a series of vanadium-based alloys: V, 0.5 per cent Si; V, 5 per cent Ca; V, 5 per cent Mo; V, 5 per cent Nb; V, 2 per cent Zr; V, 20 per cent Ti; V, 10 per cent Al; V, 10 per cent Sn and v, 10 per cent Ti liable to be used as canning material in fast reactors. The transformation by forging at about 1000 deg. C and rolling between 200 deg. C and room temperature is satisfactory for all types of alloys except V with 10 per cent Sn and V with 10 per cent Al. The mechanical properties deduced from tensile strength tests carried out on alloy samples annealed 1 hour at 1050 deg. C in a vacuum show that, generally speaking, the addition elements lead to an improvement in these properties as compared to those of pure vanadium. After undergoing corrosion tests in a liquid sodium loop purified by a cold trap, the alloys become brittle at room temperature. Only the vanadium containing 20 per cent Ti keeps its plastic properties. These alloys are covered by a layer of vanadium carbide VC. After undergoing treatment in a liquid sodium loop purified by a hot trap, all the alloys keep their good mechanical characteristics. The surface layer with which they are covered is composed of two vanadium carbides VC and γ VC, and a vanadium sub-oxide VO 0.9 . (author) [fr

  16. Probing the structural and electronic properties of small vanadium monoxide clusters.

    Science.gov (United States)

    Wang, Huai-Qian; Li, Hui-Fang; Kuang, Xiao-Yu

    2012-04-21

    The structural evolution and bonding of a series of early transition-metal oxide clusters, V(n)O(q) (n = 3-9, q = 0,-1), have been investigated with the aid of previous photoelectron spectroscopy (PES) and theoretical calculations. For each vanadium monoxide cluster, many low-lying isomers are generated using the Saunders "Kick" global minimum stochastic search method. Theoretical electron detachment energies (both vertical and adiabatic) were compared with the experimental measurements to verify the ground states of the vanadium monoxide clusters obtained from the DFT calculations. The results demonstrate that the combination of photoelectron spectroscopy experiments and DFT calculation is not only powerful for obtaining the electronic and atomic structures of size-selected clusters, but also valuable in resolving structurally and energetically close isomers. The second difference energies and adsorption energies as a function of the cluster size exhibit a pronounced even-odd alternation phenomenon. The adsorption energies of one O atom on the anionic (6.64 → 8.16 eV) and neutral (6.41 → 8.13 eV) host vanadium clusters are shown to be surprisingly high, suggesting strong capabilities to activate O by structural defects in vanadium oxides. This journal is © the Owner Societies 2012

  17. Bioaccumulation of Vanadium by Vanadium-Resistant Bacteria Isolated from the Intestine of Ascidia sydneiensis samea.

    Science.gov (United States)

    Romaidi; Ueki, Tatsuya

    2016-06-01

    Isolation of naturally occurring bacterial strains from metal-rich environments has gained popularity due to the growing need for bioremediation technologies. In this study, we found that the vanadium concentration in the intestine of the vanadium-rich ascidian Ascidia sydneiensis samea could reach 0.67 mM, and thus, we isolated vanadium-resistant bacteria from the intestinal contents and determined the ability of each bacterial strain to accumulate vanadium and other heavy metals. Nine strains of vanadium-resistant bacteria were successfully isolated, of which two strains, V-RA-4 and S-RA-6, accumulated vanadium at a higher rate than did the other strains. The maximum vanadium absorption by these bacteria was achieved at pH 3, and intracellular accumulation was the predominant mechanism. Each strain strongly accumulated copper and cobalt ions, but accumulation of nickel and molybdate ions was relatively low. These bacterial strains can be applied to protocols for bioremediation of vanadium and heavy metal toxicity.

  18. Are vanadium compounds drugable? Structures and effects of antidiabetic vanadium compounds: a critical review.

    Science.gov (United States)

    Scior, Thomas; Guevara-García, Antonio; Bernard, Philippe; Do, Quoc-Tuan; Domeyer, David; Laufer, Stefan

    2005-11-01

    Vanadate can be bioequivalent to phosphate and replace it in cellular metabolism. The detection of insulin-like activity has spurred interest in the development of oral anti-diabetic drugs containing vanadium. We collected and evaluated a vast toxicity data set and discussed molecular aspects related to insulin-mimetic effects of vanadium complexes.

  19. Thermal desorption of toluene from Vanadium-containing catalysts coated onto various carriers

    Directory of Open Access Journals (Sweden)

    Z. Zheksenbaeva

    2012-12-01

    Full Text Available The method temperature-programmed desorption has been studied the state of toluene on the surface-modified vanadium catalysts on different carriers. Among the investigated carriers the most active in the reaction of partial oxidation of toluene is anatase structural titanium dioxide. For the partial oxidation of toluene on modified vanadium-containing catalysts deposited on TiO2 was tested. It was found that on the catalyst 20%V2O5-5%MoO3-2%Sb2O3/TiO2 at a temperature of 673K, volume rate of 15 thousand hours-1 oxidation of toluene is 80% c yield of benzoic acid with a selectivity of  70% of 87.5%.

  20. An extraction-chromogenic system for vanadium(IV,V based on 2,3-dihydroxynaphtahlene

    Directory of Open Access Journals (Sweden)

    Gavazov Kiril B.

    2016-10-01

    Full Text Available A liquid-liquid extraction-chromogenic system for vanadium(IV, V containing 2,3-dihydroxynaphtahlene (DN, 2,3,5-triphenyl-2H-tetrazolium chloride (TTC, water and chloroform was studied in detail. When the vanadium is in the oxidation state of IV, the extracted species are aggregates containing three 1:2:1 (V:DN:TTC ion-pair units composed of triphenyltetrazolium cations (TT+ and chelate anions {[VIVO(DN(DNH]− (I and/or [VIV(OH(DN2]− (II}. When the initial oxidation state of vanadium is V and the DN concentration is high, vanadium(V is reduced by DN to a lower oxidation state, V(IV. However, at low DN concentration, vanadium(V can enter the organic phase as a part of an ion-pair consisting of TT+ and [VVO2(DN]− (III. The ground-state equilibrium geometries of the anions I, II, and III were optimized by quantum chemical calculations using BLYP/6-31++G⋆. The following characteristics were determined under the optimum conditions for VIV extraction: absorption maximum λmax = 333 nm, molar absorptivity ε333= 2.1x104 dm3 mol−1 cm−1, Sandell’s sensitivity SS = 2.4 ng cm−2, and fraction extracted E = 98%. The conditional extraction constant was calculated by two independent methods. The calibration graph was linear in the range 0.1-3.1 μg cm−3 (R2=0.9994 and the limit of detection was 0.03 μg cm−3.

  1. In situ electrical resistivity measurements of vanadium thin films performed in vacuum during different annealing cycles

    Science.gov (United States)

    Pedrosa, Paulo; Cote, Jean-Marc; Martin, Nicolas; Arab Pour Yazdi, Mohammad; Billard, Alain

    2017-02-01

    The present study describes a sputtering and in situ vacuum electrical resistivity setup that allows a more efficient sputtering-oxidation coupling process for the fabrication of oxide compounds like vanadium dioxide, VO2. After the sputtering deposition of pure V thin films, the proposed setup enables the sample holder to be transferred from the sputtering to the in situ annealing + resistivity chamber without venting the whole system. The thermal oxidation of the V films was studied by implementing two different temperature cycles up to 550 °C, both in air (using a different resistivity setup) and vacuum conditions. Main results show that the proposed system is able to accurately follow the different temperature setpoints, presenting clean and low-noise resistivity curves. Furthermore, it is possible to identify the formation of different vanadium oxide phases in air, taking into account the distinct temperature cycles used. The metallic-like electrical properties of the annealed coatings are maintained in vacuum whereas those heated in air produce a vanadium oxide phase mixture.

  2. High Activity of Ce1-xNixO2-y for H2 Production through Ethanol Steam Reforming: Tuning Catalytic Performance through Metal-Oxide Interactions

    Energy Technology Data Exchange (ETDEWEB)

    G Zhou; L Barrio; S Agnoli; S Senanayake; J Evans; A Kubacka; M Estrella; J Hanson; A Martinez-Arias; et al.

    2011-12-31

    The importance of the oxide: Ce{sub 0.8}Ni{sub 0.2}O{sub 2-y} is an excellent catalyst for ethanol steam reforming. Metal-oxide interactions perturb the electronic properties of the small particles of metallic nickel present in the catalyst under the reaction conditions and thus suppress any methanation activity. The nickel embedded in ceria induces the formation of O vacancies, which facilitate cleavage of the OH bonds in ethanol and water.

  3. Manufacturing development of low activation vanadium alloys

    International Nuclear Information System (INIS)

    Smith, J.P.; Johnson, W.R.; Baxi, C.B.

    1996-10-01

    General Atomics is developing manufacturing methods for vanadium alloys as part of a program to encourage the development of low activation alloys for fusion use. The culmination of the program is the fabrication and installation of a vanadium alloy structure in the DIII-D tokamak as part of the Radiative Divertor modification. Water-cooled vanadium alloy components will comprise a portion of the new upper divertor structure. The first step, procuring the material for this program has been completed. The largest heat of vanadium alloy made to date, 1200 kg of V-4Cr-4Ti, has been produced and is being converted into various product forms. Results of many tests on the material during the manufacturing process are reported. Research into potential fabrication methods has been and continues to be performed along with the assessment of manufacturing processes particularly in the area of joining. Joining of vanadium alloys has been identified as the most critical fabrication issue for their use in the Radiative Divertor Program. Joining processes under evaluation include resistance seam, electrodischarge (stud), friction and electron beam welding. Results of welding tests are reported. Metallography and mechanical tests are used to evaluate the weld samples. The need for a protective atmosphere during different welding processes is also being determined. General Atomics has also designed, manufactured, and will be testing a helium-cooled, high heat flux component to assess the use of helium cooled vanadium alloy components for advanced tokamak systems. The component is made from vanadium alloy tubing, machined to enhance the heat transfer characteristics, and joined to end flanges to allow connection to the helium supply. Results are reported

  4. Iron diminishes the in vitro biological effect of vanadium.

    Science.gov (United States)

    Mechanistic pathways underlying inflammatory injury following exposures to vanadium-containing compounds are not defined. We tested the postulate that the in vitro biological effect of vanadium results from its impact on iron homeostasis. Human bronchial epithelial (HBE) cells ex...

  5. 77 FR 51825 - Ferrovanadium and Nitrided Vanadium From Russia

    Science.gov (United States)

    2012-08-27

    ... COMMISSION Ferrovanadium and Nitrided Vanadium From Russia Determination On the basis of the record \\1... antidumping duty order on ferrovanadium and nitrided vanadium from Russia would not be likely to lead to... contained in USITC Publication 4345 (August 2012), entitled Ferrovanadium and Nitrided Vanadium from Russia...

  6. Determination of Leachable Vanadium (V) in Sediment | Mampuru ...

    African Journals Online (AJOL)

    A method for speciation of vanadium in solid samples was developed for quantification of vanadium(+5) in solid samples of sediment Certified Reference Materials (CRM) PACS-2 and MESS-3 (Trace Elements in Sediments) of known total vanadium content. The method relies on a classical analytical chemistry procedure ...

  7. Impedance spectroscopy study and phase transition in phospho-vanadium mixed oxide LiZnV{sub 0.5}P{sub 0.5}O{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Rahal, A.; Guidara, Kamel; Megdiche, Makram [Sfax Universite, Laboratoire de Caracterisations Spectroscopiques et Optique des Materiaux (LaSCOM), Faculte des Sciences de Sfax, BP 1171, Sfax (Tunisia); Megdiche Borchani, S. [Sfax Universite, Laboratoire de Caracterisations Spectroscopiques et Optique des Materiaux (LaSCOM), Faculte des Sciences de Sfax, BP 1171, Sfax (Tunisia); Institut Superieur D' Informatique et de Multimedia de Sfax (ISIMS), Pole Technologique de Sfax, Sakiet Ezzit, BP 242, Sfax (Tunisia)

    2017-08-15

    An X-ray crystallographic study has allowed us to identify a powder of the type LiZnV{sub 0.5}P{sub 0.5}O{sub 4}, which contains 50% of vanadium and 50% of phosphor, inside the binary system LiZnVO{sub 4}-LiZnPO{sub 4}. The structure is isotypic with the phenacite like LiZnP0{sub 4}. X-ray diffraction patterns are indexed according to the lattice parameters of the rhombohedral system and the R3 space group. IR spectra show the presence of VO{sub 4} and PO{sub 4} groups in the network of this material. The experimental results indicate that σ{sub AC}(ω) is proportional to (ω{sup n}). The activation energy found from the Arrhenius plot confirms that the conduction processing of the material is not due to simple hopping mechanism. The temperature dependence of frequency exponent n was investigated to understanding the conduction mechanism in LiZnV{sub 0.5}P{sub 0.5}O{sub 4}. The non-overlapping small Polaron tunneling (NSPT) model can explain the temperature dependence of the frequency exponent. A phase transition at T = 623 K has been evidenced by Differential scanning calorimetry (DSC) and subsequently confirmed by the analysis of dielectric and electric properties. (orig.)

  8. Tuning the degree of oxidation and electron delocalization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) with solid-electrolyte

    Science.gov (United States)

    Vempati, Sesha; Ertas, -->Yelda; Celebioglu, Asli; Uyar, Tamer

    2017-10-01

    We report on the effects of ionic interaction on the electronic structure of PEDOT:PSS where the oxidation state of PEDOT is an import aspect for various applications. Additional ionic interactions are introduced and controlled by varying the fraction of poly(ethylene oxide) (PEO). These interactions are balanced against the inherent cohesive forces within each of the polymers constituting intertwined networks. Raman spectra evidenced a peak-shift as high as ∼14 cm-1 for Cdbnd C vibrational region which suggested increasing degree of oxidation of PEDOT for higher PEO fractions. Changes to the single and bipolaronic absorption bands support the results from the Raman spectra. For highest PEO fraction neutral-PEDOT and lowered bipolaron density is attributed to localization of PEDOT chains within PEO matrix. Interestingly, for higher PEO fractions the electronic density of states (DOS) of HOMO and core-levels (S2p, C1s and O1s) suggested increased degree of oxidation and electron

  9. iTunes music

    CERN Document Server

    Katz, Bob

    2013-01-01

    Apple's exciting new Mastered for iTunes (MFiT) initiative, introduced in early 2012, introduces new possibilities for delivering high-quality audio. For the first time, record labels and program producers are encouraged to deliver audio materials to iTunes in a high resolution format, which can produce better-sounding masters. In iTunes Music, author and world-class mastering engineer Bob Katz starts out with the basics, surveys the recent past, and brings you quickly up to the present-where the current state of digital audio is bleak. Katz explains the evolution of

  10. Java performance tuning

    CERN Document Server

    Shirazi, Jack

    2003-01-01

    Performance has been an important issue for Java developers ever since the first version hit the streets. Over the years, Java performance has improved dramatically, but tuning is essential to get the best results, especially for J2EE applications. You can never have code that runs too fast. Java Peformance Tuning, 2nd edition provides a comprehensive and indispensable guide to eliminating all types of performance problems. Using many real-life examples to work through the tuning process in detail, JPT shows how tricks such as minimizing object creation and replacing strings with arrays can

  11. Robust Self Tuning Controllers

    DEFF Research Database (Denmark)

    Poulsen, Niels Kjølstad

    1985-01-01

    The present thesis concerns robustness properties of adaptive controllers. It is addressed to methods for robustifying self tuning controllers with respect to abrupt changes in the plant parameters. In the thesis an algorithm for estimating abruptly changing parameters is presented. The estimator...... has several operation modes and a detector for controlling the mode. A special self tuning controller has been developed to regulate plant with changing time delay.......The present thesis concerns robustness properties of adaptive controllers. It is addressed to methods for robustifying self tuning controllers with respect to abrupt changes in the plant parameters. In the thesis an algorithm for estimating abruptly changing parameters is presented. The estimator...

  12. An improved method of preparation of nanoparticular metal oxide catalysts

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention concerns an improved method of preparation of nanoparticular vanadium oxide/anatase titania catalysts having a narrow particle size distribution. In particular, the invention concerns preparation of nanoparticular vanadium oxide/anatase titania catalyst precursors comprising...... combustible crystallization seeds upon which the catalyst metal oxide is coprecipitated with the carrier metal oxide, which crystallization seeds are removed by combustion in a final calcining step....

  13. TUNE: Compiler-Directed Automatic Performance Tuning

    Energy Technology Data Exchange (ETDEWEB)

    Hall, Mary [University of Utah

    2014-09-18

    This project has developed compiler-directed performance tuning technology targeting the Cray XT4 Jaguar system at Oak Ridge, which has multi-core Opteron nodes with SSE-3 SIMD extensions, and the Cray XE6 Hopper system at NERSC. To achieve this goal, we combined compiler technology for model-guided empirical optimization for memory hierarchies with SIMD code generation, which have been developed by the PIs over the past several years. We examined DOE Office of Science applications to identify performance bottlenecks and apply our system to computational kernels that operate on dense arrays. Our goal for this performance-tuning technology has been to yield hand-tuned levels of performance on DOE Office of Science computational kernels, while allowing application programmers to specify their computations at a high level without requiring manual optimization. Overall, we aim to make our technology for SIMD code generation and memory hierarchy optimization a crucial component of high-productivity Petaflops computing through a close collaboration with the scientists in national laboratories.

  14. Insulin-mimetic action of vanadium compounds on osteoblast-like cells in culture

    OpenAIRE

    Etcheverry, Susana B.; Crans, D. C.; Keramidas, A. D.; Cortizo, Ana María

    1997-01-01

    Vanadium compounds mimic insulin actions in different cell types. The present study concerns the insulin-like effects of three vanadium(V) derivatives and one vanadium(IV) complex on osteoblast-like (UMR106 and MC3T3E1) cells in culture. The vanadium oxalate and vanadium citrate complexes hydrolyzed completely under the culture conditions, whereas more than 40% of the vanadium tartrate and nitrilotriacetate complexes remained. Vanadate, as well as vanadium oxalate, citrate, and tartrate compl...

  15. Atomic layer deposition of VO{sub 2} films with Tetrakis-dimethyl-amino vanadium (IV) as vanadium precursor

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Xinrui [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Cao, Yunzhen, E-mail: yzhcao@mail.sic.ac.cn [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China); Yan, Lu; Li, Ying; Song, Lixin [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2017-02-28

    Highlights: • VO{sub 2} film was easily deposited by ALD using novel vanadium precursor V(NMe{sub 2}){sub 4}. • Deposition and annealing condition were systematically investigated. • Comparable transition properties of VO{sub 2} film on resistance and spectral transmittance were studied. - Abstract: VO{sub 2} thin films have been grown on Si(100) (VO{sub 2}/Si) and fused silica substrates (VO{sub 2}/SiO{sub 2}) by atomic layer deposition (ALD) using tetrakis-dimethyl-amino vanadium (IV) (TDMAV) as a novel vanadium precursor and water as reactant gas. The quartz crystal microbalance (QCM) measurement was performed to study the ALD process of VO{sub 2} thin film deposition, and a constant growth rate of about 0.95 Å/cycle was obtained at the temperature range of 150–200 °C. XRD measurement was performed to study the influence of deposition temperature and post-annealing condition on the crystallization of VO{sub 2} films, which indicated that the films deposited between 150 and 200 °C showed well crystallinity after annealing at 475 °C for 100 min in Ar atmosphere. XPS measurement verified that the vanadium oxidation state was 4+ for both as-deposited film and post-annealed VO{sub 2}/Si film. AFM was applied to study the surface morphology of VO{sub 2}/Si films, which showed a dense polycrystalline film with roughness of about 1 nm. The resistance of VO{sub 2}/Si films deposited between 150 °C and 200 °C as a function of temperature showed similar semiconductor-to-metal transition (SMT) characters with the transition temperature for heating branch (T{sub c,h}) of about 72 °C, a hysteresis width of about 10 °C and the resistance change of two orders of magnitude. The increase of T{sub c,h} compared with the bulk VO{sub 2} (68 °C) may be attributed to the tensile stress along the c-axis in the film. Transmittance measurement of VO{sub 2}/SiO{sub 2} films showed typical thermochromic property with a NIR switching efficiency of above 50% at 2 μm across

  16. Tuning the charge state of Ag and Au atoms and clusters deposited on oxide surfaces by doping: a DFT study of the adsorption properties of nitrogen- and niobium-doped TiO2 and ZrO2.

    Science.gov (United States)

    Schlexer, Philomena; Ruiz Puigdollers, Antonio; Pacchioni, Gianfranco

    2015-09-14

    The charge state of Ag and Au atoms and clusters (Ag4 and Au4, Ag5 and Au5) adsorbed on defective TiO2 anatase(101) and tetragonal ZrO2(101) has been systematically investigated as a function of oxide doping and defectivity using a DFT+U approach. As intrinsic defects, we have considered the presence of oxygen vacancies. As extrinsic defects, substitutional nitrogen- and niobium-doping have been investigated, respectively. Both surface and sub-surface defects and dopants have been considered. Whereas on surfaces with oxygen vacancies or Nb-doping, atoms and clusters may become negatively charged, N-doping always leads to the formation of positively charged adsorbates, independently of the supporting material (TiO2 or ZrO2). This suggests the possibility to tune the electronic properties of supported metal clusters by selective doping of the oxide support, an effect that may result in complete changes in chemical reactivity.

  17. IRIS Toxicological Review of Vanadium Pentoxide (External ...

    Science.gov (United States)

    This vanadium pentoxide reassessment consists of an oral reference dose (RfD), an inhalation reference concentration (RfC), an inhalation unit risk (IUR) and a cancer weight of evidence descriptor. This is the first assessment developing an RfC or IUR for this compound. This assessment is intended to provide human health data to support agency regulatory decisions. EPA is reassessing its IRIS toxicological review of vanadium pentoxide (CASRN 1314-62-1). This vanadium pentoxide reassessment consists of an oral reference dose (RfD), an inhalation reference concentration (RfC), an inhalation unit risk (IUR) and a cancer weight of evidence descriptor. This is the first assessment developing an RfC or IUR for this compound. This assessment is intended to provide human health data to support agency regulatory decisions.

  18. Betatron tune measurement

    International Nuclear Information System (INIS)

    Dinev, D.

    2001-01-01

    On the basis of the comparative review of the methods for the betatron tune measurement in cyclic accelerators of synchrotrons type, the research of these methods is carried out from the point of view of their applicability to Nuclotron. Both methods using measurement of the statistical fluctuations of the beam current (Schottky noise) and methods using coherent beam excitation have been discussed. The emphasis is on the final results of importance for the tune measurement practice. Signal processing is briefly discussed too

  19. Interaction of vanadium compounds with DNA

    OpenAIRE

    Butenko, Nataliya

    2013-01-01

    Tese de doutoramento, Química, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2013 The DNA cleavage activity of several vanadium complexes (VC) was studied. The focus was on vanadium acetylacetonate, VIVO(acac)2, 1, and several β-diketonate oxidovanadium(IV/V) derivatives: VIVO(hd)2 (2, hd = 3,5-heptanedione), VIVO(Cl-acac) 2, (3, Cl-acac = 3-chloro-2,4-pentanedione), VIVO(Et-acac)2 (4, Et-acac = 3-ethyl- 2,4- pentanedione) and VIVO(Me-acac)2 (5, Me-acac = 3-methyl-2,4-pentan...

  20. The Effect of Chromium on the Roasting Process of Vanadium Extraction

    Directory of Open Access Journals (Sweden)

    Dong Liu

    2016-07-01

    Full Text Available We simulated the roasting process of chromium by mixing Cr2O3 and Na2CO3 to analyze the influence of chromium on roasting vanadium slag. Samples were characterized by XRD, thermal analysis and SEM at different temperatures: Cr2O3 and Na2CO3 began to react at 500 °C. When the chromium oxide content was about 3.2%, the conversion rate of V reached the maximum value of 95%.