The Zenith Passage of the Sun at the Mesoamerican Sites of Tula and Chichen Itza

OpenAIRE

Sparavigna, Amelia Carolina

2017-01-01

International audience; Using software SunCalc.org we can easily observe the alignments of buildings along the direction of the sunset on the day of the zenith passage of the sun, at two Mesoamerican sites. These sites are those of Tula and Chichen Itza.

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. V. - November of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. V.- Noviembre de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Garcia A, J.; Rodriguez A, F

2002-01-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. III.- September of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. III.- Septiembre de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Rodriguez A, F.; Garcia A, J

2001-12-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. II.- August of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. II.- Agosto de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Rodriguez A, F.; Garcia A, J

2001-10-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. I.- July of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. I.- Julio de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A.; Vizuet G, J

2001-09-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic. The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. VI. - December of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. VI.- Diciembre de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A; Vizuet G, J; Benitez S, J A; Garcia A, J; Rodriguez A, F

2002-01-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. IV. - October of 2001; Asesoria especializada en seguridad radiologica al hospital general Tula, PEMEX. IV.- Octubre de 2001

Energy Technology Data Exchange (ETDEWEB)

Angeles C, A; Vizuet G, J; Benitez S, J A; Garcia A, J; Rodriguez A, F

2002-01-15

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Green corridors basics

DEFF Research Database (Denmark)

Panagakos, George

2016-01-01

SuperGreen project, which aimed at advancing the green corridor concept through a benchmarking exercise involving Key Performance Indicators (KPIs). The chapter discusses the available definitions of green corridors and identifies the characteristics that distinguish a green corridor from any other...... efficient surface transportation corridor. After providing examples of green corridor projects in Europe, it focuses on the KPIs that have been proposed by various projects for monitoring the performance of a freight corridor. Emphasis is given to the SuperGreen KPIs, covering the economic, technical...

Non-Operational Property Evaluation for the Hanford Site River Corridor - 12409

Energy Technology Data Exchange (ETDEWEB)

Lowe, John [CH2M HILL, Richland, Washington 99354 (United States); Aly, Alaa [CH2M HILL Plateau Remediation Company and INTERA Incorporated, Richland, Washington 99354 (United States)

2012-07-01

The Hanford Site River Corridor consists of the former reactor areas of the 100 Areas and the former industrial (fuel processing) area in the 300 Area. Most of the waste sites are located close to the decommissioned reactors or former industrial facilities along the Columbia River. Most of the surface area of the River Corridor consists of land with little or no subsurface infrastructure or indication of past or present releases of hazardous constituents, and is referred to as non-operational property or non-operational area. Multiple lines of evidence have been developed to assess identified fate and transport mechanisms and to evaluate the potential magnitude and significance of waste site-related contaminants in the non-operational area. Predictive modeling was used for determining the likelihood of locating waste sites and evaluating the distribution of radionuclides in soil based on available soil concentration data and aerial radiological surveys. The results of this evaluation indicated: 1) With the exception of stack emissions, transport pathways associated with waste site contaminants are unlikely to result in dispersion of contaminants in soil away from operational areas, 2) Stack emissions that may have been associated with Hanford Site operations generally emitted short-lived and/or gaseous radionuclides, and (3) the likelihood of detecting elevated radionuclide concentrations or other waste sites in non-operational area soils is very small. The overall conclusions from the NPE evaluation of the River Corridor are: - With the exception of stack emissions to the air, transport pathways associated with waste site contaminants are unlikely to result in dispersion of contaminants in soil away from operational areas. While pathways such as windblown dust, overland transport and biointrusion have the potential for dispersing waste site contaminants, the resulting transport is unlikely to result in substantial contamination in non-operational areas. - Stack

Comparison of in situ observations of air traffic emission signatures in the North Atlantic flight corridor with simulations using a Gaussian plume model

Energy Technology Data Exchange (ETDEWEB)

Konopka, P; Schlager, H; Schulte, P; Schumann, U; Ziereis, H [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere; Hagen, D; Whitefield, P [Missouri Univ., Rolla, MO (United States). Lab. for Cloud and Aerosol Science

1998-12-31

Focussed aircraft measurements including NO, NO{sub 2}, O{sub 3}, and aerosols (CN) have been carried out over the Eastern North Atlantic as part of the POLINAT (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) project to search for small and large scale signals of air traffic emissions in the corridor region. Here, the experimental data measured at cruising altitudes on November, 6, 1994 close to peak traffic hours are considered. Observed peak concentrations in small scale NO{sub x} spikes exceed background level of about 50 pptv by up to two orders of magnitude. The measured NO{sub x} concentration field is compared with simulations obtained with a plume dispersion model using collected air traffic data and wind measurements. Additionally, the measured and calculated NO/NO{sub x} ratios are considered. The comparison with the model shows that the observed (multiple-)peaks can be understood as a superposition of several aircraft plumes with ages up to 3 hours. (author) 12 refs.

Comparison of in situ observations of air traffic emission signatures in the North Atlantic flight corridor with simulations using a Gaussian plume model

Energy Technology Data Exchange (ETDEWEB)

Konopka, P.; Schlager, H.; Schulte, P.; Schumann, U.; Ziereis, H. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere; Hagen, D.; Whitefield, P. [Missouri Univ., Rolla, MO (United States). Lab. for Cloud and Aerosol Science

1997-12-31

Focussed aircraft measurements including NO, NO{sub 2}, O{sub 3}, and aerosols (CN) have been carried out over the Eastern North Atlantic as part of the POLINAT (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) project to search for small and large scale signals of air traffic emissions in the corridor region. Here, the experimental data measured at cruising altitudes on November, 6, 1994 close to peak traffic hours are considered. Observed peak concentrations in small scale NO{sub x} spikes exceed background level of about 50 pptv by up to two orders of magnitude. The measured NO{sub x} concentration field is compared with simulations obtained with a plume dispersion model using collected air traffic data and wind measurements. Additionally, the measured and calculated NO/NO{sub x} ratios are considered. The comparison with the model shows that the observed (multiple-)peaks can be understood as a superposition of several aircraft plumes with ages up to 3 hours. (author) 12 refs.

Industrial structural transformation and carbon dioxide emissions in China

International Nuclear Information System (INIS)

Zhou, Xiaoyan; Zhang, Jie; Li, Junpeng

2013-01-01

Using provincial panel data from the period 1995–2009 to analyze the relationship between the industrial structural transformation and carbon dioxide emissions in China, we find that the first-order lag of industrial structural adjustment effectively reduced the emissions; technical progress itself did not reduce the emissions, but indirectly led to decreasing emissions through the upgrading and optimization of industrial structure. Foreign direct investment and intervention by local governments reduced carbon dioxide emissions, but urbanization significantly increased the emissions. Thus, industrial structural adjustment is an important component of the development of a low-carbon economy. In the context of industrial structural transformation, an effective way to reduce a region’s carbon dioxide emissions is to promote the upgrading and optimization of industrial structure through technical progress. Tighter environmental access policies, selective utilization of foreign direct investment, and improvements in energy efficiency can help to reduce carbon dioxide emissions. - Highlights: ► Relationship between the transformation of industrial structure and CO 2 emissions in China. ► Dynamic panel data model. ► Industrial structural adjustments can effectively reduce current CO 2 emissions. ► Technical progress leads to decreasing CO 2 emissions through upgrading of industrial structure

Industry protests new emissions trading regime

International Nuclear Information System (INIS)

Berends, J.; Schyns, V.

2008-01-01

The new emissions trading proposals presented by the European Commission on January 23rd, 2008, threaten to seriously hamper the competitiveness of European industry in the global market, according to industry organizations. They demand radical changes in the way Brussels allocates emission allowances. It is stated that auctioning of allowances, as the Commission proposes, will drive industry and employment out of Europe

New York in the new world economy : the I-90 corridor study : final report

Science.gov (United States)

2002-12-01

The I-90 Corridor in upstate New York is a classic example of the de-industrialization of the Northeastern United States. With few exceptions, all counties along the corridor have experienced marked declined in manufacturing employment over the past ...

Carbon emissions reduction in China's food industry

International Nuclear Information System (INIS)

Lin, Boqiang; Lei, Xiaojing

2015-01-01

In this paper, we evaluate the changes in carbon dioxide emissions from energy consumption in China's food industry from 1986 to 2010 based on the Logarithmic Mean Divisia Index (LMDI) method. The results show that energy intensity (EI) and industrial activity (IA) are the main determinants of the changes in carbon dioxide. Energy intensity (EI) contributes to decrease in emissions within 25 years while industrial activity (IA) acts in a positive way to increase the emissions level. Industry scale (IS) mostly contributes to increase in emissions except for the time interval 1996–2000. However, for both carbon intensity (CI) and energy structure (ES), they have a volatile but not significant influence on emissions in the different time intervals. To further understand the effects, we analyze the cumulative emission during the whole period 1986–2010. The results further testify that energy intensity and industrial activity are the most important factors affecting reduction and growth of carbon emissions. The results indicate that efforts to reduce emission in China's food industry should focus on the enhancement of energy efficiency, the optimization of industrial scale and the restructuring energy use. Finally, recommendations are provided for the reduction of carbon dioxide in China's food industry. - Highlights: • We analyze the energy consumption and CO 2 emissions in China's food industry. • LMDI decomposition analysis is conducted for finding out the driving forces. • Industrial activity is the main driving force of CO 2 emissions in this industry. • Energy intensity is the main factor mitigating carbon emissions in this industry. • Main advice: improving energy efficiency, optimizing industrial scale.

Airborne observations of large scale accumulations of air traffic emissions in the North Atlantic flight corridor within a stagnant anticyclone

Energy Technology Data Exchange (ETDEWEB)

Schlager, H; Schulte, P; Ziereis, H; Schumann, U [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany). Inst. fuer Physik der Atmosphaere; Arnold, F [Max-Planck-Inst. fuer Kernphysik, Heidelberg (Germany); Ovarlez, J [Centre National de la Recherche Scientifique, 91 - Palaiseau (France). Lab. de Meteorologie; Velthoven, P van [Koninklijk Nederlands Meteorologisch Inst., De Bilt (Netherlands)

1998-12-31

Vertical and horizontal trace gas distributions were measured west of Ireland during a 7-day period in June 1995 within an extended stagnant anticyclone located in the North Atlantic flight corridor. Four subsequent flights (21, 24, 26, 28 June) with the DLR Falcon research aircraft were performed including observations of NO, O{sub 3}, HNO{sub 3}, CO{sub 2}, and meteorological parameters. NO volume mixing ratios in the upper troposphere from vertical profile measurements averaged over the corridor height range increased by 74 pptv (60%) during the observation period. Averaged NO concentrations measured along constant level flight legs at 10.7 km from 50 to 54 deg N increased by 87 pptv. Corresponding simulations with a 3-d chemistry transport model of KNMI reveal similar increases of NO{sub x} for the measuring area over the 7-day period for a model run with air traffic emissions which is not obtained for a run with no air traffic NO{sub x}. (author) 15 refs.

Airborne observations of large scale accumulations of air traffic emissions in the North Atlantic flight corridor within a stagnant anticyclone

Energy Technology Data Exchange (ETDEWEB)

Schlager, H.; Schulte, P.; Ziereis, H.; Schumann, U. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany). Inst. fuer Physik der Atmosphaere; Arnold, F. [Max-Planck-Inst. fuer Kernphysik, Heidelberg (Germany); Ovarlez, J. [Centre National de la Recherche Scientifique, 91 - Palaiseau (France). Lab. de Meteorologie; Velthoven, P. van [Koninklijk Nederlands Meteorologisch Inst., De Bilt (Netherlands)

1997-12-31

Vertical and horizontal trace gas distributions were measured west of Ireland during a 7-day period in June 1995 within an extended stagnant anticyclone located in the North Atlantic flight corridor. Four subsequent flights (21, 24, 26, 28 June) with the DLR Falcon research aircraft were performed including observations of NO, O{sub 3}, HNO{sub 3}, CO{sub 2}, and meteorological parameters. NO volume mixing ratios in the upper troposphere from vertical profile measurements averaged over the corridor height range increased by 74 pptv (60%) during the observation period. Averaged NO concentrations measured along constant level flight legs at 10.7 km from 50 to 54 deg N increased by 87 pptv. Corresponding simulations with a 3-d chemistry transport model of KNMI reveal similar increases of NO{sub x} for the measuring area over the 7-day period for a model run with air traffic emissions which is not obtained for a run with no air traffic NO{sub x}. (author) 15 refs.

Mapping High Biomass Corridors for Climate and Biodiversity Co-Benefits

Science.gov (United States)

Jantz, P.; Goetz, S. J.; Laporte, N. T.

2013-12-01

A key issue in global conservation is how climate mitigation activities can secure biodiversity co-benefits. Tropical deforestation releases significant amounts of CO2 to the atmosphere and results in widespread biodiversity loss. The dominant strategy for forest conservation has been protected area designation. However, maintaining biodiversity in protected areas requires ecological exchange with ecosystems in which they are embedded. At current funding levels, existing conservation strategies are unlikely to prevent further loss of connectivity between protected areas and surrounding landscapes. The emergence of REDD+, a mechanism for funding carbon emissions reductions from deforestation in developing countries, suggests an alignment of goals and financial resources for protecting forest carbon, maintaining biodiversity in protected areas, and minimizing loss of forest ecosystem services. Identifying, protecting and sustainably managing vegetation carbon stocks between protected areas can provide both climate mitigation benefits through avoided CO2 emissions from deforestation and biodiversity benefits through the targeted protection of forests that maintain connectivity between protected areas and surrounding ecosystems. We used a high resolution, pan-tropical map of vegetation carbon stocks derived from MODIS, GLAS lidar and field measurements to map corridors that traverse areas of highest aboveground biomass between protected areas. We mapped over 13,000 corridors containing 49 GtC, accounting for 14% of unprotected vegetation carbon stock in the tropics. In the majority of cases, carbon density in corridors was commensurate with that of the protected areas they connect, suggesting significant opportunities for achieving climate mitigation and biodiversity co-benefits. To further illustrate the utility of this approach, we conducted a multi-criteria analysis of corridors in the Brazilian Amazon, identifying high biodiversity, high vegetation carbon stock

Freight corridor performance measurement system: A framework for South Africa

Directory of Open Access Journals (Sweden)

Jan H. Havenga

2016-11-01

Full Text Available Background: On a national level, South Africa’s freight logistics industry is inefficient. The country ranks 36th out of 40 countries in terms of transport productivity (tonne kilometres as a ratio of gross domestic product, or GDP; the ratio of freight logistics costs to GDP measured 11.1% in 2013, compared to that of developed regions which measures in the order of 9%; and rail tonne-km market share on the two most dense long-distance corridors, namely, GautengDurban and Gauteng-Cape Town, is only 12.8% and 4.4%, respectively, whereas rail is globally acknowledged as a more efficient provider of long-distance freight solutions, given appropriate investments and service commitments. Objectives: A cornerstone of improved national freight logistics performance is the availability of reliable indicators to quantify the efficiency and capacity of the logistics network over the intermediate and long term, thereby enabling an evidence-based policy and investment environment. The objective of this article is to describe the foundation framework (i.e. phase 1 for South Africa’s freight corridor performance measurement system (CPMS. Once populated, the CPMS will be a key generator of indicators to facilitate the systemic management of corridors as a national production factor and thereby contributing to South Africa’s competitiveness. Method: The design of South Africa’s CPMS was informed by desktop research and refined through an extensive stakeholder consultation process. A distinction was made between South Africa’s dedicated bulk corridors and the multi-modal corridors. Results: Facilitating both stakeholder involvement and agreement on key indicators, as well as the eventual development of a system supporting the population, aggregation and dissemination of the CPMS are critical outcomes for the management of corridors as a national production factor. Three overarching corridor indicators were defined, relating to increased throughput

gaseous emissions from some industries at ama industrial complex ...

African Journals Online (AJOL)

user

2015-08-11

Aug 11, 2015 ... air quality standards. Therefore, it is recommended that these companies should determine appropriate control measures to reduce these toxic emissions. Key words: Toxic gaseous emissions, type, concentrations, Ama Industrial Complex, Nigeria. INTRODUCTION. Air pollutants such as carbon dioxide ...

ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project

Energy Technology Data Exchange (ETDEWEB)

Walker, Randy M [ORNL; Gross, Ian G [ORNL; Smith, Cyrus M [ORNL; Hill, David E [ORNL

2011-11-01

Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to

ORNL Trusted Corridors Project: Watts Bar Dam Inland Waterway Project

International Nuclear Information System (INIS)

Walker, Randy M.; Gross, Ian G.; Smith, Cyrus M.; Hill, David E.

2011-01-01

Radiation has existed everywhere in the environment since the Earth's formation - in rocks, soil, water, and plants. The mining and processing of naturally occurring radioactive materials for use in medicine, power generation, consumer products, and industry inevitably generate emissions and waste. Radiological measuring devices have been used by industry for years to measure for radiation in undesired locations or simply identify radioactive materials. Since the terrorist attacks on the United States on 9-11-01 these radiation measuring devices have proliferated in many places in our nation's commerce system. DOE, TVA, the Army Corps and ORNL collaborated to test the usefulness of these devices in our nation's waterway system on this project. The purpose of the Watts Bar Dam ORNL Trusted Corridors project was to investigate the security, safety and enforcement needs of local, state and federal government entities for state-of-the-art sensor monitoring in regards to illegal cargo including utilization of the existing infrastructure. TVA's inland waterways lock system is a recognized and accepted infrastructure by the commercial carrier industry. Safety Monitoring activities included tow boat operators, commercial barges and vessels, recreational watercraft and their cargo, identification of unsafe vessels and carriers, and, monitoring of domestic and foreign commercial vessels and cargo identification. Safety Enforcement activities included cargo safety, tracking, identification of hazardous materials, waterway safety regulations, and hazardous materials regulations. Homeland Security and Law Enforcement Applications included Radiological Dispersive Devices (RDD) identification, identification of unsafe or illicit transport of hazardous materials including chemicals and radiological materials, and screening for shipments of illicit drugs. In the Fall of 2005 the SensorNet funding for the project expired. After several unsuccessful attempts to find a Federal sponsor

Large-Scale Habitat Corridors for Biodiversity Conservation: A Forest Corridor in Madagascar.

Directory of Open Access Journals (Sweden)

Tanjona Ramiadantsoa

Full Text Available In biodiversity conservation, habitat corridors are assumed to increase landscape-level connectivity and to enhance the viability of otherwise isolated populations. While the role of corridors is supported by empirical evidence, studies have typically been conducted at small spatial scales. Here, we assess the quality and the functionality of a large 95-km long forest corridor connecting two large national parks (416 and 311 km2 in the southeastern escarpment of Madagascar. We analyze the occurrence of 300 species in 5 taxonomic groups in the parks and in the corridor, and combine high-resolution forest cover data with a simulation model to examine various scenarios of corridor destruction. At present, the corridor contains essentially the same communities as the national parks, reflecting its breadth which on average matches that of the parks. In the simulation model, we consider three types of dispersers: passive dispersers, which settle randomly around the source population; active dispersers, which settle only in favorable habitat; and gap-avoiding active dispersers, which avoid dispersing across non-habitat. Our results suggest that long-distance passive dispersers are most sensitive to ongoing degradation of the corridor, because increasing numbers of propagules are lost outside the forest habitat. For a wide range of dispersal parameters, the national parks are large enough to sustain stable populations until the corridor becomes severely broken, which will happen around 2065 if the current rate of forest loss continues. A significant decrease in gene flow along the corridor is expected after 2040, and this will exacerbate the adverse consequences of isolation. Our results demonstrate that simulation studies assessing the role of habitat corridors should pay close attention to the mode of dispersal and the effects of regional stochasticity.

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. IV. - October of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Garcia A, J.; Rodriguez A, F.

2002-01-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. VI. - December of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Garcia A, J.; Rodriguez A, F.

2002-01-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. II.- August of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Rodriguez A, F.; Garcia A, J.

2001-10-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. III.- September of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Rodriguez A, F.; Garcia A, J.

2001-12-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. V. - November of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.; Benitez S, J. A.; Garcia A, J.; Rodriguez A, F.

2002-01-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic.The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Specialized consultant in radiological safety to the Tula general hospital, PEMEX. I.- July of 2001

International Nuclear Information System (INIS)

Angeles C, A.; Vizuet G, J.

2001-09-01

The Tula general hospital, dependent of PEMEX, It request consultant of the ININ to be able to maintain their sanitary license for the use of X-ray equipment for the radiologic diagnostic. The proposal of the ININ was to be a program of technical attendance, schedule monthly to be able to solve the observations that are presented in the use of those equipment, and that the hospital can conserve its respective sanitary license.(Author)

Aerosol composition from Tlaxcoapan, Hidalgo in central Mexico

International Nuclear Information System (INIS)

Martinez C, M. A.; Solis, C.; Andrade, E.; Issac O, K.; Beltran H, R. I.; Medina M, S. A.; Martinez R, G.; Ramirez R, A.; Lucho C, C. A.; Del Razo, L. M.

2010-01-01

Air quality mexican regulations about atmospheric aerosols refer to particle sizes and to the total suspended particle. None of these norms establishes the allowed values based on the particulate chemical composition. Mexican environmental legislation also considers as critical zones those with high concentration of contaminants in the atmosphere. One of these zones is the Tula-Vito-Apasco corridor where no chemical composition characterization in terms of trace metal associated to the air particulate matter has been made. Along this corridor near Tlaxcoapan there are important contaminant sources as petrochemical and electric power plants, metal-mechanical industry, limestone quarry and contaminated soils. In this work PIXE and Sem-EDS were applied to the PM 10 fraction collected on filters. The trace element values thus determined were compared with those of a similar critical zone. It was found that most of the coarse particles come from limestone quarry as fugitive dusts while V, Ni, Cr and Pb values are moderately high and seems to be associated to industrial activities and contaminated soil as well. (Author)

Aerosol composition from Tlaxcoapan, Hidalgo in central Mexico

Energy Technology Data Exchange (ETDEWEB)

Martinez C, M. A.; Solis, C.; Andrade, E. [UNAM, Instituto de Fisica, Circuito Exterior, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Issac O, K. [Universidad Autonoma del Estado de Mexico, Facultad de Medicina, Paseo Tollocan y Jesus Carranza s/n, 50120 Toluca, Estado de Mexico (Mexico); Beltran H, R. I. [Universidad Autonoma del Estado de Hidalgo, Centro de Investigaciones Quimicas, Carretera Pachuca-Tulancingo Km. 4.5, 42174 Pachuca, Hidalgo (Mexico); Medina M, S. A.; Martinez R, G.; Ramirez R, A.; Lucho C, C. A. [Universidad Politecnica de Pachuca, Programa de Ingenieria en Biotecnologia, Carretera Pachuca-Cd. Sahagun Km. 20, Ex-Hacienda de Santa Barbara, Municipio de Zempoala, Hidalgo (Mexico); Del Razo, L. M. [IPN, Centro de Investigacion y de Estudios Avanzados, Seccion Externa de Toxicologia, Ticoman, 07360 Mexico D. F. (Mexico)

2010-02-15

Air quality mexican regulations about atmospheric aerosols refer to particle sizes and to the total suspended particle. None of these norms establishes the allowed values based on the particulate chemical composition. Mexican environmental legislation also considers as critical zones those with high concentration of contaminants in the atmosphere. One of these zones is the Tula-Vito-Apasco corridor where no chemical composition characterization in terms of trace metal associated to the air particulate matter has been made. Along this corridor near Tlaxcoapan there are important contaminant sources as petrochemical and electric power plants, metal-mechanical industry, limestone quarry and contaminated soils. In this work PIXE and Sem-EDS were applied to the PM{sub 10} fraction collected on filters. The trace element values thus determined were compared with those of a similar critical zone. It was found that most of the coarse particles come from limestone quarry as fugitive dusts while V, Ni, Cr and Pb values are moderately high and seems to be associated to industrial activities and contaminated soil as well. (Author)

Balancing regional industrial development: analysis on regional disparity of China's industrial emissions and policy implications

DEFF Research Database (Denmark)

Liang, Hanwei; Dong, Liang; Luo, Xiao

2016-01-01

Efficient industrial emissions mitigation strategy is critical for China's national action on climate change and sustainable development, considering its rapid industrialization. Regional disparity brings difficulties and uncertainties to policy implementation in China. Therefore, an investigation...... development, and highlight not only disparity, but also inequity exists. It is concluded that, there is a larger unequal distribution of GDP per unit of air pollutants and CO2 emission between eastern and western regions, reveals that less developed western and central regions suffer from the emission leakage...... on the regional features of industrial emissions is critical to better decision makings. While to date, related studies have been rather few. This paper applies a spatial analysis on regional features of China's industrial emissions (SO2, NOx and PM2.5 and CO2 emission) in 31 provinces. Spatial autocorrelation...

Carbon stock corridors to mitigate climate change and promote biodiversity in the tropics

Science.gov (United States)

Jantz, Patrick; Goetz, Scott; Laporte, Nadine

2014-02-01

A key issue in global conservation is how biodiversity co-benefits can be incorporated into land use and climate change mitigation activities, particularly those being negotiated under the United Nations to reduce emissions from tropical deforestation and forest degradation. Protected areas have been the dominant strategy for tropical forest conservation and they have increased substantially in recent decades. Avoiding deforestation by preserving carbon stored in vegetation between protected areas provides an opportunity to mitigate the effects of land use and climate change on biodiversity by maintaining habitat connectivity across landscapes. Here we use a high-resolution data set of vegetation carbon stock to map corridors traversing areas of highest biomass between protected areas in the tropics. The derived corridors contain 15% of the total unprotected aboveground carbon in the tropical region. A large number of corridors have carbon densities that approach or exceed those of the protected areas they connect, suggesting these are suitable areas for achieving both habitat connectivity and climate change mitigation benefits. To further illustrate how economic and biological information can be used for corridor prioritization on a regional scale, we conducted a multicriteria analysis of corridors in the Legal Amazon, identifying corridors with high carbon, high species richness and endemism, and low economic opportunity costs. We also assessed the vulnerability of corridors to future deforestation threat.

Atmospheric ventilation corridors and coefficients for pollution plume ...

African Journals Online (AJOL)

This study presents a comparative investigation of atmospheric ventilation corridors and coefficients for gaseous pollution plume released from an isolated industrial facility into the ambient air of the host community in Ile-Ife suburb, southwest Nigeria. For the months of September to December in the year 2012 and 2013, ...

Greenhouse gas emissions from industrial activities

International Nuclear Information System (INIS)

Kinyanjui, L.N.

1998-01-01

This study considers greenhouse gas emissions stemming from industrial activities such as cement production; limestone use and lime production. The Intergovernmental Panel on Climate Change (IPCC) (1995a) methodology for industrial sector was applied for the three components selected. Limitations hindering the handling of other industrial process are listed as budgetary and time. Data sources and recommendations are listed

Understanding Excess Emissions from Industrial Facilities: Evidence from Texas.

Science.gov (United States)

Zirogiannis, Nikolaos; Hollingsworth, Alex J; Konisky, David M

2018-03-06

We analyze excess emissions from industrial facilities in Texas using data from the Texas Commission on Environmental Quality. Emissions are characterized as excess if they are beyond a facility's permitted levels and if they occur during startups, shutdowns, or malfunctions. We provide summary data on both the pollutants most often emitted as excess emissions and the industrial sectors and facilities responsible for those emissions. Excess emissions often represent a substantial share of a facility's routine (or permitted) emissions. We find that while excess emissions events are frequent, the majority of excess emissions are emitted by the largest events. That is, the sum of emissions in the 96-100th percentile is often several orders of magnitude larger than the remaining excess emissions (i.e., the sum of emissions below the 95th percentile). Thus, the majority of events emit a small amount of pollution relative to the total amount emitted. In addition, a small group of high emitting facilities in the most polluting industrial sectors are responsible for the vast majority of excess emissions. Using an integrated assessment model, we estimate that the health damages in Texas from excess emissions are approximately $150 million annually.

THE ANALYSIS OF THE GEOLOGICAL AND ECONOMIC MINERAL RESOURCES IN THE RAIL ROAD CORRIDOR "URAL INDUSTRIAL – URAL POLAR"

Directory of Open Access Journals (Sweden)

V.P. Pakhomov

2007-06-01

Full Text Available The article brings forth the geological-economic analysis of the mineral resource in the area of the transport corridor "Urals industrial – Urals Polar". Given is the analysis of the potential finding of coal on the territory, chromate and other important excavations, the whereabouts of which are more easily approachable for the acquiring with the condition of building a railroad with the path of station Polunochnoye-Obskaya. Given are the possible masses of the delivery of the products accordingly. Distinguished is the size of the investments, that are needed for the mineral resources of the given territory.

Emission factors of Austrian industry production and international comparison. Final report

International Nuclear Information System (INIS)

Turi, K.

1997-05-01

During the last few years a number of measures have been implemented in the Austrian industries to reduce air pollution and energy use. Therefore specific emissions in the various sectors were changed considerably during this period. The aim of this research project was to better characterize air pollutant emissions of the Austrian industry. Emission data as measured by the Austrian industry was compared with published emission factors from international literature. The results show that the emission factors of the Austrian industry are generally lower than literature emission factors. This is because on the one hand many older data from the literature do not reflect current state of the knowledge, and on the other hand because emission reduction measures and new technologies were introduced in the Austrian industry. (author)

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Factors influencing CO2 emissions in China's power industry: Co-integration analysis

International Nuclear Information System (INIS)

Zhao, Xiaoli; Ma, Qian; Yang, Rui

2013-01-01

More than 40% of China's total CO 2 emissions originate from the power industry. The realization of energy saving and emission reduction within China's power industry is therefore crucial in order to achieve CO 2 emissions reduction in this country. This paper applies the autoregressive-distributed lag (ARDL) co-integration model to study the major factors which have influenced CO 2 emissions within China's power industry from 1980 to 2010. Results have shown that CO 2 emissions from China's power industry have been increasing rapidly. From 1980 to 2010, the average annual growth rate was 8.5%, and the average growth rate since 2002 has amounted to 10.5%. Secondly, the equipment utilization hour (as an indicator of the power demand) has the greatest influence on CO 2 emissions within China's power industry. In addition, the impact of the industrial added value of the power sector on CO 2 emissions is also positive from a short-term perspective. Thirdly, the Granger causality results imply that one of the important motivators behind China's technological progress, within the power industry, originates from the pressures created by a desire for CO 2 emissions reduction. Finally, this paper provides policy recommendations for energy saving and emission reduction for China's power industry. - Highlights: ► We study the major factors influencing China's power industry CO 2 emissions. ► The average annual growth rate of CO 2 emission from power industry is calculated. ► Installed capacity has the greatest influence on power industry CO 2 emission. ► The Granger causality between CO 2 emission and its effecting factors is analyzed

Tula hantavirus NSs protein accumulates in the perinuclear area in infected and transfected cells.

Science.gov (United States)

Virtanen, Jussi Oskari; Jääskeläinen, Kirsi Maria; Djupsjöbacka, Janica; Vaheri, Antti; Plyusnin, Alexander

2010-01-01

The small RNA segment of some hantaviruses (family Bunyaviridae) encodes two proteins: the nucleocapsid protein and, in an overlapping reading frame, a non-structural (NSs) protein. The hantavirus NSs protein, like those of orthobunya- and phleboviruses, counteracts host innate immunity. Here, for the first time, the NSs protein of a hantavirus (Tula virus) has been observed in infected cells and shown to localize in the perinuclear area. Transiently expressed NSs protein showed similar localization, although the kinetics was slightly different, suggesting that to reach its proper location in the infected cell, the NSs protein does not have to cooperate with other viral proteins.

Air quality monitoring in the Bow Corridor : final report December 1999 to August 2001. On-line ed.

International Nuclear Information System (INIS)

2001-01-01

Alberta Environment monitored the air quality of the Bow Corridor and the Cochrane area from December 1999 to August 2001 in an effort to address recent concerns about particulate emissions from industrial, natural and domestic sources as well as concerns about air pollution from traffic along Highway 1 and in communities in the corridor. The Mobile Air Monitoring Laboratory (MAML) monitored air quality at 22 sites in the Cochrane, Exshaw, Canmore and Banff areas. The work included monitoring for sulphur dioxide, particulates, oxides of nitrogen, ozone, hydrocarbons, carbon monoxide, hydrogen sulphide and ammonia using continuous analyzers. In addition, a stationary particulate sampler was used to monitor very small, respirable particulates (PM2.5) as well as larger, inhalable particulates (PM10). Weather parameters such as wind, temperature and relative humidity were also monitored. A passive (no power required) air quality monitoring network was also set up to collect monthly samples of sulphur dioxide at 7 sites and nitrogen dioxide and ozone at 11 different sites. The pollutant levels were compared with air quality levels to Alberta's Ambient Air Quality Guidelines which are some of the most stringent in North America. Maximum one-hour concentrations were : 53 per cent of the one-hour guideline for sulphur dioxide; 15 per cent of the one-hour guideline for nitrogen dioxide; 68 per cent of the one-hour guideline for ozone; 8 per cent of the one-hour guideline for carbon monoxide; 20 per cent of the one-hour guideline for hydrogen sulphide; and 2 per cent of the one-hour guideline for ammonia. These air quality levels were compared to other locations in Alberta. The sources of airborne particulates were wind-blown dust from natural sources, limestone mining operations, manufacturing plants (cement, lime and magnesia), vehicle exhaust from local traffic and Highway 1, and smoke from recreational burning and forest fires. The sources of oxides of nitrogen are

Air Pollutant Emissions Projections for the Cement and Steel Industry in China and the Impact of Emissions Control Technologies

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2017-03-01

China’s cement and steel industry accounts for approximately half of the world’s total cement and steel production. These two industries are two of the most energy-intensive and highest carbon dioxide (CO₂)-emitting industries and two of the key industrial contributors to air pollution in China. For example, the cement industry is the largest source of particulate matter (PM) emissions in China, accounting for 40 percent of its industrial PM emissions and 27 percent of its total national PM emissions. The Chinese steel industry contributed to approximately 20 percent of sulfur dioxide (SO_{2) emissions and 27 percent of PM emissions for all key manufacturing industries in China in 2013. In this study, we analyzed and projected the total PM and SO2 emissions from the Chinese cement and steel industry from 2010–2050 under three different scenarios: a Base Case scenario, an Advanced scenario, and an Advanced EOP (end-of-pipe) scenario. We used bottom-up emissions control technologies data and assumptions to project the emissions. In addition, we conducted an economic analysis to estimate the cost for PM emissions reductions in the Chinese cement industry using EOP control technologies, energy efficiency measures, and product change measures. The results of the emissions projection showed that there is not a substantial difference in PM emissions between the Base Case and Advanced scenarios, for both the cement and steel industries. This is mainly because PM emissions in the cement industry caused mainly by production process and not the fuel use. Since our forecast for the cement production in the Base Case and Advanced scenarios are not too different from each other, this results in only a slight difference in PM emissions forecast for these two scenarios. Also, we assumed a similar share and penetration rate of control technologies from 2010 up to 2050 for these two scenarios for the cement and steel industry. However, the Advanced EOP}

Methane emissions from the natural gas industry

International Nuclear Information System (INIS)

Harrison, M.R.; Cowgill, R.M.; Campbell, L.M.; Lott, R.A.

1993-01-01

The U.S. EPA and the United Nation's Intergovernmental Panel on Climate Change (IPCC) have suggested that global warming could be reduced if more energy was generated using natural gas rather than fuels such as coal. An increased use of natural gas instead of coal would decrease global warming since methane emits less carbon dioxide (CO 2 ) than any fossil fuel. However, methane is a more potent as a greenhouse gas than CO 2 , and leakage from the gas system could reduce or eliminate the inherent advantage of natural gas. For this reason, methane emissions must be quantified before a national policy on preferred fuels is developed. Therefore, GRI and EPA have developed this confunded program to quantify methane emissions from the U.S. gas industry. This paper presents, for general industry review, the approach and methodology that the project is using to determine the emissions. The study will measure or calculate all gas industry methane emissions - from production at the wellhead, through the system, to the customer's meter. When these data are combined with data from other studies, a definitive comparison of the relative environmental impact of using methane versus other fuels will be possible. The study will also provide data that can be used by the industry to identify cost-effective mitigation techniques to reduce losses. The methane emissions project is being conducted in three phases: the first two phases have identified and ranked all known potential methane-emitting sources and established methods for measuring, calculating, and extrapolating emissions from those sources. The third phase, which is currently in progress, will gather sufficient data to achieve the accuracy goal. This paper briefly summarizes the methodology being used for the completion of the third phase

Trade pattern change impact on industrial CO2 emissions in Taiwan

International Nuclear Information System (INIS)

Wu, Jung-Hua; Huang, Yun-Hsun; Chen, Yen-Yin

2007-01-01

Input-output structural decomposition analysis (I-O SDA) is applied in this paper to analyze the sources of change in industrial CO 2 emissions in Taiwan from 1989 to 2001. Owing to the fact that Taiwan is an export-oriented, trade-dependent economy, the focus is on trade transformation over the past decade and its effect over industrial CO 2 emissions. Change in trade patterns has significantly impacted many aspects of the Taiwan economy, subsequently resulting in various influences on industrial CO 2 emissions, as shown by empirical analysis results. Change in export level increased industrial CO 2 emissions, above all other effects, by 72.1%. However, changes in export mix and import coefficients imposed effects of dragging down industrial CO 2 emissions by 5.7% and 11.7%, respectively. (author)

From corridor to region

DEFF Research Database (Denmark)

Jensen, Anne; Jespersen, Per Homann

2006-01-01

The corridor between Oslo and Berlin is by the politicians of the regional authorities in the Scandinavian part of the corridor seen a region with unique qualities and a large innovation and growth potential. In order to explore and develop this potential an In-terreg project has been launched...... this task by applying principles of participative planning and with action research methodology are involving stakeholders in the process of defining, developing and disseminating the idea of the Corridor of Innovation and Cooperation - COINCO....

New NOx cleansing technology can reduce industry emissions

International Nuclear Information System (INIS)

2006-01-01

The Norwegian, Bergen-based company ECO Energy has recently launched a new cleaning technology halving NO x emissions from industry plants without requiring large investments. Thus, governmental promises to finance NO x cleaning equipment for Norwegian industry have become less expensive to reach. ECO Energy has ensured world patent on the 'stopNOx' technology. Its method consists of adding water and urea to oil before the combustion process. The technology has been applied in Italy, reducing NO x emissions from industry in average with above 50 percent (ml)

Tula and Puumala hantavirus NSs ORFs are functional and the products inhibit activation of the interferon-beta promoter.

Science.gov (United States)

Jääskeläinen, Kirsi M; Kaukinen, Pasi; Minskaya, Ekaterina S; Plyusnina, Angelina; Vapalahti, Olli; Elliott, Richard M; Weber, Friedemann; Vaheri, Antti; Plyusnin, Alexander

2007-10-01

The S RNA genome segment of hantaviruses carried by Arvicolinae and Sigmodontinae rodents encodes the nucleocapsid (N) protein and has an overlapping (+1) open reading frame (ORF) for a putative nonstructural protein (NSs). The aim of this study was to determine whether the ORF is functional. A protein corresponding to the predicted size of Tula virus (TULV) NSs was detected using coupled in vitro transcription and translation from a cloned S segment cDNA, and a protein corresponding to the predicted size of Puumala virus (PUUV) NSs was detected in infected cells by Western blotting with an anti-peptide serum. The activities of the interferon beta (IFN-beta) promoter, and nuclear factor kappa B (NF-kappaB)- and interferon regulatory factor-3 (IRF-3) responsive promoters, were inhibited in COS-7 cells transiently expressing TULV or PUUV NSs. Also IFN-beta mRNA levels in IFN-competent MRC5 cells either infected with TULV or transiently expressing NSs were decreased. These data demonstrate that Tula and Puumala hantaviruses have a functional NSs ORF. The findings may explain why the NSs ORF has been preserved in the genome of most hantaviruses during their long evolution and why hantavirus-infected cells secrete relatively low levels of IFNs. (c) 2007 Wiley-Liss, Inc.

International Oil Price’s Impacts on Carbon Emission in China’s Transportation Industry

Directory of Open Access Journals (Sweden)

Guoxing Zhang

2014-09-01

Full Text Available Purpose: This paper analyses the impact mechanism of international oil price on the industrial carbon emission, and uses the partial least squares regression model to study international oil price’s impact on carbon emissions in China’s transportation industry.Design/methodology/approach: This paper chooses five independent variables of GDP, international oil price, private car population, passenger and freight transportation volume as impact factors to investigate industrial carbon emissions, the paper also analyses the impact mechanism of international oil price on the industrial carbon emission, and finally the paper uses the partial least squares regression model to study international oil price’s impact on carbon emissions in China’s transportation industry. With the independent variables’ historical data from 1994 to 2009 as a sample, the fitting of the industry carbon emissions is satisfying. And based on the data of 2011, the paper maintains the private car owning, passenger and freight transportation volume to study international oil prices’ impact on the industry carbon emissions at different levels of GDP.Findings: The results show that: with the same GDP growth, the industry carbon emissions increase with the rise in international oil prices, and vice versa, the industry carbon emissions decrease; and lastly when GDP increases to a certain extent, in both cases of international oil prices’ rise or fall, the industry carbon emissions will go up, and the industry carbon emissions increase even faster while the energy prices are rising.Practical implications: Limit the growth in private-vehicle ownership, change China's transport sector within the next short-term in the structure of energy consumption and put forward China's new energy, alternative energy sources and renewable energy application so as to weaken the dependence on international oil, and indirectly slowdown China's GDP growth rate, which are all possible

Scenario Study on PM emission Reduction in Cement Industry

Science.gov (United States)

Tang, Qian; Chen, Xiaojun; Xia, Xin; Wang, Lijuan; Wang, Huili; Jin, Ling; Yan, Zhen

2018-01-01

Cement industry is one of the high pollution industries in China. Evaluation of the primary particulate matter (PM) emission status and the reduction potential is not only important for our understanding of the effectiveness of current pollution control measures but also vital for future policy design. In this study, PM emitted from cement producing process in 2014 was calculated using an emission factor method. Three PM emission control scenarios were set up considering source control, process management and end-of-pipe treatment, and the PM emission reduction by 2020 under the three scenarios was predicted, respectively. In 2014, the primary PM emission from cement industry was 1.95 million tons. By 2020, the productions of cement and clinker were expected to increase by 12% and 7%, respectively, and the PM emission would increase by about 10%. By implementation of GB4915-2013 and comprehensive control of fugitive PM emission, the PM emission would probably be reduced by 34%. Another 7% decrease would be expected from source control. The second scenario can be considered as an assessment of the effectiveness of the revised emission standard, and this research can be used as a technical support to the environmental management authorities to make relevant policies.

Green corridors in freight logistics

DEFF Research Database (Denmark)

Panagakos, George

of the performance of a green corridor in terms of pre-specified Key Performance Indicators (KPIs). The thesis builds on previous own work under the EUfinanced SuperGreen project and applies the new methodology on the GreCOR corridor extending from Oslo to Rotterdam. The scope of the two other objectives relates...... the rationale for a performance monitoring scheme has been established, the thesis critically reviews the SuperGreen methodology which consists of: (i) decomposing the corridor into transport chains, (ii) selecting a sample of typical chains, (iii) assessing these chains through a set of KPIs, and (iv......) aggregating the chain-level KPIs to corridor-level ones using proper weights. Unlike SuperGreen that suggests a study-based approach for constructing the corridor sample, the thesis proposes founding the selection of typical chains on the outcome of specialised transport models. The periodic collection...

China’s regional industrial energy efficiency and carbon emissions abatement costs

International Nuclear Information System (INIS)

Wang, Ke; Wei, Yi-Ming

2014-01-01

Graphical abstract: Major cities in eight economy-geography regions of China. - Highlights: • Industrial energy and emissions efficiency were evaluated for China’s major cities. • Shadow prices of CO 2 emissions were estimated for China’s major cities. • Efficiency increase potentials on energy utilization and CO 2 emissions are 19% and 17%. • N-shaped EKC exists between levels of CO 2 emissions efficiency and income. • Average industrial CO 2 emissions abatement cost for China’s major cities is 45 US$. - Abstract: Evaluating the energy and emissions efficiency, measuring the energy saving and emissions reduction potential, and estimating the carbon price in China at the regional level are considered a crucial way to identify the regional efficiency levels and efficiency promotion potentials, as well as to explore the marginal abatement costs of carbon emissions in China. This study applies a newly developed Data Envelopment Analysis (DEA) based method to evaluate the regional energy and emissions efficiencies and the energy saving and emissions reduction potentials of the industrial sector of 30 Chinese major cities during 2006–2010. In addition, the CO 2 shadow prices, i.e., the marginal abatement costs of CO 2 emissions from industrial sector of these cities are estimated during the same period. The main findings are: (i) The coast area cities have the highest total factor industrial energy and emissions efficiency, but efficiency of the west area cities are lowest, and there is statistically significant efficiency difference between these cities. (ii) Economically well-developed cities evidence higher efficiency, and there is still obviously unbalanced and inequitable growth in the nationwide industrial development of China. (iii) Fortunately, the energy utilization and CO 2 emissions efficiency gaps among different Chinese cities were decreasing since 2006, and the problem of inequitable nationwide development has started to mitigate. (iv

Atmospheric emissions from the upstream oil and gas industry

International Nuclear Information System (INIS)

Taylor, B.G.S.

1994-01-01

The results are presented of a study set up to determine the nature and levels of atmospheric emissions resulting from United Kingdom oil and gas exploration and production activities. The study was commissioned by the UK Offshore Operators Association. Emissions by the upstream oil and gas industry of common pollutants, such as carbon monoxide, sulphur dioxide and nitrous oxide, and ozone depletion chemicals were shown in each case to be less than 1% of total UK emissions. Greenhouse gas emissions in the industry arise mainly from production operations with a small but significant contribution from onshore activities. Carbon dioxide is the major component followed in descending order by nitrogen oxides, methane and volatile organic compounds. In 1991, these emissions formed 3.2%, 4.6%, 2.9% and 2.8% of the UK totals respectively; overall this represented only about 3% of UK global warming emissions. The evidence of this study illustrates that the industry, which produces 67% of the UK's primary energy, is successfully managing its operations in an environmentally responsible way. (3 figures, 3 tables) (UK)

Changes in CO2 emission intensities in the Mexican industry

International Nuclear Information System (INIS)

González, Domingo; Martínez, Manuel

2012-01-01

A CO 2 emission intensity analysis in the Mexican industry from 1965 to 2010 is carried out by taking into consideration four stages: 1965–1982, 1982–1994, 1994–2003, and 2004–2010. Based on the LMDI decomposition methodology, three influencing factors are analyzed: energy intensity, CO 2 coefficient, and structure in terms of their contributions of each individual attributes to the overall percent change of them as it was proposed in Choi and Ang (2011). The energy intensity effect was the driving factor behind the main decreases of CO 2 intensity, the CO 2 coefficient effect contributed to less extent to mitigate it, and the structure effect tended to increased it. It is observed that CO 2 intensity declined by 26.2% from 1965 to 2003, but it increased by 10.1% from 2004 to 2010. In addition, the move of Mexico from an economic model based on import-substitution to an export-oriented economy brought more importance to the Mexican industry intended to export, thus maintaining high levels of activity of industries such as cement, iron and steel, chemical, and petrochemical, while industries such as automotive, and ‘other’ industries grown significantly not only as far their energy consumptions and related CO 2 emissions but they also increased their contributions to the national economy. - Highlights: ► Industrial CO 2 emission intensity was reduced by 26.2% from 1965 to 2003. ► Industrial CO 2 emission intensity was increased by 10.1% from 2003 to 2010. ► 1965–2003: Intensity effect took down CO 2 emission intensity. ► 2003–2010: Export-oriented industries raised CO 2 emission intensity.

CO2 emissions and mitigation potential in China's ammonia industry

International Nuclear Information System (INIS)

Zhou Wenji; Zhu Bing; Li Qiang; Ma Tieju; Hu Shanying; Griffy-Brown, Charla

2010-01-01

Significant pressure from increasing CO 2 emissions and energy consumption in China's industrialization process has highlighted a need to understand and mitigate the sources of these emissions. Ammonia production, as one of the most important fundamental industries in China, represents those heavy industries that contribute largely to this sharp increasing trend. In the country with the largest population in the world, ammonia output has undergone fast growth spurred by increasing demand for fertilizer of food production since 1950s. However, various types of technologies implemented in the industry make ammonia plants in China operate with huge differences in both energy consumption and CO 2 emissions. With consideration of these unique features, this paper attempts to estimate the amount of CO 2 emission from China's ammonia production, and analyze the potential for carbon mitigation in the industry. Based on the estimation, related policy implications and measures required to realize the potential for mitigation are also discussed.

Blockchain Enhanced Emission Trading Framework in Fashion Apparel Manufacturing Industry

Directory of Open Access Journals (Sweden)

Bailu Fu

2018-04-01

Full Text Available Motivated by the recent blockchain technology originally built for bitcoin transactions, various industries are exploring the opportunities to redefine their existing operational systems. In this study, an innovative environmentally sustainable solution is proposed for the fashion apparel manufacturing industry (FAMI, which is energized by blockchain. Incorporating the Emission Trading Scheme (ETS, and a novel “emission link” system, the proposed framework exposes carbon emission to the public and establishes a feature to reduce the emissions for all key steps of clothing making. Fully compatible with Industry 4.0, blockchain provides decentralization, transparency, automation, and immutability characteristics to the proposed framework. Specifically, the blockchain supported ETS framework, the carbon emissions of clothing manufacturing life cycle, and the emission link powered procedures are introduced in detail. A case study is provided to demonstrate the carbon emission evaluation procedure. Finally, a multi-criteria evaluation is performed to demonstrate the benefits and drawbacks of the proposed system.

Economic development and multiple air pollutant emissions from the industrial sector.

Science.gov (United States)

Fujii, Hidemichi; Managi, Shunsuke

2016-02-01

This study analyzed the relationship between economic growth and emissions of eight environmental air pollutants (carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), nitrogen oxide (NOx), sulfur oxide (SOx), carbon monoxide (CO), non-methane volatile organic compound (NMVOC), and ammonia (NH3)) in 39 countries from 1995 to 2009. We tested an environmental Kuznets curve (EKC) hypothesis for 16 individual industry sectors and for the total industrial sector. The results clarified that at least ten individual industries do not have an EKC relationship in eight air pollutants even though this relationship was observed in the country and total industrial sector level data. We found that the key industries that dictated the EKC relationship in the country and the total industrial sector existed in CO2, N2O, CO, and NMVOC emissions. Finally, the EKC turning point and the relationship between economic development and trends of air pollutant emissions differ among industries according to the pollution substances. These results suggest inducing new environmental policy design such as the sectoral crediting mechanism, which focuses on the industrial characteristics of emissions.

VT Electric Transmission Line Corridors - corridor lines

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

Energy use and CO2 emissions of China's industrial sector from a global perspective

International Nuclear Information System (INIS)

Zhou, Sheng; Kyle, G. Page; Yu, Sha; Clarke, Leon E.; Eom, Jiyong; Luckow, Patrick; Chaturvedi, Vaibhav; Zhang, Xiliang; Edmonds, James A.

2013-01-01

The industrial sector has accounted for more than 50% of China's final energy consumption in the past 30 years. Understanding the future emissions and emissions mitigation opportunities depends on proper characterization of the present-day industrial energy use, as well as industrial demand drivers and technological opportunities in the future. Traditionally, however, integrated assessment research has handled the industrial sector of China in a highly aggregate form. In this study, we develop a technologically detailed, service-oriented representation of 11 industrial subsectors in China, and analyze a suite of scenarios of future industrial demand growth. We find that, due to anticipated saturation of China's per-capita demands of basic industrial goods, industrial energy demand and CO 2 emissions approach a plateau between 2030 and 2040, then decrease gradually. Still, without emissions mitigation policies, the industrial sector remains heavily reliant on coal, and therefore emissions-intensive. With carbon prices, we observe some degree of industrial sector electrification, deployment of CCS at large industrial point sources of CO 2 emissions at low carbon prices, an increase in the share of CHP systems at industrial facilities. These technological responses amount to reductions of industrial emissions (including indirect emission from electricity) are of 24% in 2050 and 66% in 2095. - Highlights: • Eleven industrial subsectors in China are detail analyzed from a global perspective. • Industrial energy use and CO 2 emissions will approach a plateau between 2030 and 2040. • Industrial CHP and CCS are truly encouraged by carbon tax. • Some degree of industrial sector electrification are observed by carbon tax

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

Science.gov (United States)

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Intermodal Logistics Centres and Freight Corridors – Concepts and Trends

Directory of Open Access Journals (Sweden)

Norbert Wagener

2017-09-01

Full Text Available . Background: The development of international freight corridors, as the Trans European Network and new rail and inland shipping corridors in Asia and Africa, require efficient logistics centres along these corridors which serve as intermodal interfaces and provide a variety of different logistics service functions. The definition of the term logistics centre differs between countries and implies different functionalities. Locations are often selected randomly and business models are opportunity driven, especially in highly dynamic and less regulated new emerging economies. In particular Freight Villages as a special form of logistics centres have a high impact on regional development and serve as cargo generator for freight corridors. Consideration of general principles how to establish Freight Villages could improve the effectiveness of these logistics centres along freight corridors. Methods: Based on a literature review a comprehensive and hierarchical definition of logistics centres will be discussed and applied. From experiences in the development of logistics centres in several countries, especially in Germany and Lithuania, challenges and concepts concerning regulatory framework, determination of location and business and financing models are discussed. Results: Concerning the definition of logistics centres a hierarchical definition is applied which comprises different levels of logistics centres depending on the scope of the value adding and the functionality. As general principles for the development of Freight Villages the active role of the state, master planning, objective location finding, participation and co-operation of different stakeholders in the business model and a stepwise scheme for financing are introduced. Major trends for the future development of Freight Villages are the digitalization of supply chains, the application of new intermodal technologies and of innovative telematics systems, solutions for low emission and

The methane emissions of the Swiss gas industry

International Nuclear Information System (INIS)

Xinmin, J.

2004-01-01

This article presents a method for the estimation of the methane emissions caused by the Swiss gas industry. Based on new data on the Swiss gas infrastructure, current emission levels are estimated for methane - one of the major greenhouse gases. The methodology and modelling used, which is based on previous studies on this topic, are discussed. Results are presented that show that the estimates provided by the current study are consistent with earlier data. Scenarios are presented that show that a steady decrease in methane emissions emanating from the Swiss gas industry's installations can be expected by the year 2012. The data used in the study and its results are presented in tabular and graphical form and commented on

[Decomposition model of energy-related carbon emissions in tertiary industry for China].

Science.gov (United States)

Lu, Yuan-Qing; Shi, Jun

2012-07-01

Tertiary industry has been developed in recent years. And it is very important to find the factors influenced the energy-related carbon emissions in tertiary industry. A decomposition model of energy-related carbon emissions for China is set up by adopting logarithmic mean weight Divisia method based on the identity of carbon emissions. The model is adopted to analyze the influence of energy structure, energy efficiency, tertiary industry structure and economic output to energy-related carbon emissions in China from 2000 to 2009. Results show that the contribution rate of economic output and energy structure to energy-related carbon emissions increases year by year. Either is the contribution rate of energy efficiency or the tertiary industry restraining to energy-related carbon emissions. However, the restrain effect is weakening.

River Corridors (Jan 2, 2015)

Data.gov (United States)

Vermont Center for Geographic Information — River corridors are delineated to provide for the least erosive meandering and floodplain geometry toward which a river will evolve over time. River corridor maps...

Carbon dioxide emissions and climate change: policy implications for the cement industry

International Nuclear Information System (INIS)

Rehan, R.; Nehdi, M.

2005-01-01

There is growing awareness that the cement industry is a significant contributor to global carbon dioxide (CO 2 ) emissions. It is expected that this industry will come under increasing regulatory pressures to reduce its emissions and contribute more aggressively to mitigating global warming. It is important that the industry's stakeholders become more familiar with greenhouse gas (GHG) emission and associated global warming issues, along with emerging policies that may affect the future of the industry. This paper discusses climate change, the current and proposed actions for mitigating its effects, and the implications of such actions for the cement industry. International negotiations on climate change are summarized and mechanisms available under the Kyoto Protocol for reducing greenhouse gas emissions are explained. The paper examines some of the traditional and emerging policy instruments for greenhouse gas emissions and analyses their merits and drawbacks. The applicability, effectiveness and potential impact of these policy instruments for the global cement industry in general and the Canadian cement industry in particular are discussed with recommendations for possible courses of action

Estimate of methane emissions from the U.S. natural gas industry

International Nuclear Information System (INIS)

Kirchgessner, D.A.; Lott, R.A.; Cowgill, R.M.; Harrison, M.R.; Shires, T.M.

1997-01-01

Global methane emissions from the fossil fuel industries have been poorly quantified and, in many cases, emissions are not well-known even at the country level. Historically, methane emissions from the U.S. gas industry have been based on sparse data, incorrect assumptions, or both. As a result, the estimate of the contribution these emissions make to the global methane inventory could be inaccurate. For this reason the assertion that global warming could be reduced by replacing coal and oil fuels with natural gas could not be defended. A recently completed, multi year study conducted by the U.S. Environmental Protection Agency's Office of Research and Development and the Gas Research Institute, had the objective of determining methane emissions from the U.S. gas industry with an accuracy of ± 0.5% of production. The study concluded that, in the 1992 base year, methane emissions from the industry were 314 ± 105 Bscf or 6.04 ± 2.01 Tg (all conversions to international units are made at 15.56 o C and 101.325 kPa). (author)

Opportunity Analysis for Recovering Energy from Industrial Waste Heat and Emissions

Energy Technology Data Exchange (ETDEWEB)

Viswanathan, Vish V.; Davies, Richard W.; Holbery, Jim D.

2006-04-01

United States industry consumed 32.5 Quads (34,300 PJ) of energy during 2003, which was 33.1% of total U.S. energy consumption (EIA 2003 Annual Energy Review). The U.S. industrial complex yields valuable goods and products. Through its manufacturing processes as well as its abundant energy consumption, it supports a multi-trillion dollar contribution to the gross domestic product and provides millions of jobs in the U.S. each year. Industry also yields waste products directly through its manufacturing processes and indirectly through its energy consumption. These waste products come in two forms, chemical and thermal. Both forms of waste have residual energy values that are not routinely recovered. Recovering and reusing these waste products may represent a significant opportunity to improve the energy efficiency of the U.S. industrial complex. This report was prepared for the U.S. Department of Energy Industrial Technologies Program (DOE-ITP). It analyzes the opportunity to recover chemical emissions and thermal emissions from U.S. industry. It also analyzes the barriers and pathways to more effectively capitalize on these opportunities. A primary part of this analysis was to characterize the quantity and energy value of the emissions. For example, in 2001, the industrial sector emitted 19% of the U.S. greenhouse gases (GHG) through its industrial processes and emitted 11% of GHG through electricity purchased from off-site utilities. Therefore, industry (not including agriculture) was directly and indirectly responsible for emitting 30% of the U.S. GHG. These emissions were mainly comprised of carbon dioxide (CO2), but also contained a wide-variety of CH4 (methane), CO (carbon monoxide), H2 (hydrogen), NMVOC (non-methane volatile organic compound), and other chemicals. As part of this study, we conducted a survey of publicly available literature to determine the amount of energy embedded in the emissions and to identify technology opportunities to capture and

Effects of decoupling of carbon dioxide emission by Chinese nonferrous metals industry

International Nuclear Information System (INIS)

Ren Shenggang; Hu Zhen

2012-01-01

We adopted the refined Laspeyres index approach to explore the impacts of industry scale, energy mix, energy intensity and utility mix on the total carbon dioxide emissions from the Chinese nonferrous metals industry for the period 1996–2008. In addition, we calculated the trend of decoupling effects in nonferrous metals industry in China by presenting a theoretical framework for decoupling. As the results suggest, Chinese nonferrous metals industry has gone through four decoupling stages: strong negative decoupling stage (1996–1998), weak decoupling stage (1999–2000), expensive negative decoupling stage (2001–2003) and weak decoupling stage (2004–2008). We have analyzed the reasons for each phase. Generally speaking, the rapid growth of the industry is the most important factor responsible for the increase of CO 2 emissions, and the change in energy mix was mainly due to the increased proportion of electric energy consumption that has contributed to the increase of CO 2 emissions. Reduction of energy intensity has contributed significantly to emissions decrease, and the utility mix effect has also contributed to the emission decrease to some extent. - Highlights: ► We calculate the decoupling effects of CO 2 from Chinese nonferrous metals industry. ► Results demonstrate that the industry has gone through four decoupling stages. ► The output effect is most important for the increase of CO 2 emissions. ► Reduction of energy intensity has contributed significantly to emissions decrease.

Industrial CO2 emissions in China based on the hypothetical extraction method: Linkage analysis

International Nuclear Information System (INIS)

Wang, Yuan; Wang, Wenqin; Mao, Guozhu; Cai, Hua; Zuo, Jian; Wang, Lili; Zhao, Peng

2013-01-01

Fossil fuel-related CO 2 emissions are regarded as the primary sources of global climate change. Unlike direct CO 2 emissions for each sector, CO 2 emissions associated with complex linkages among sectors are usually ignored. We integrated the input–output analysis with the hypothetical extraction method to uncover the in-depth characteristics of the inter-sectoral linkages of CO 2 emissions. Based on China's 2007 data, this paper compared the output and demand emissions of CO 2 among eight blocks. The difference between the demand and output emissions of a block indicates that CO 2 is transferred from one block to another. Among the sectors analyzed in this study, the Energy industry block has the greatest CO 2 emissions with the Technology industry, Construction and Service blocks as its emission's primary destinations. Low-carbon industries that have lower direct CO 2 emissions are deeply anchored to high-carbon ones. If no effective measures are taken to limit final demand emissions or adjust energy structure, shifting to an economy that is low-carbon industries oriented would entail a decrease in CO 2 emission intensity per unit GDP but an increase in overall CO 2 emissions in absolute terms. The results are discussed in the context of climate-change policy. - Highlights: • Quantitatively analyze the characteristics of inter-industrial CO 2 emission linkages. • Propose the linkage measuring method of CO 2 emissions based on the modified HEM. • Detect the energy industry is a key sector on the output of embodied carbon. • Conclude that low-carbon industries are deeply anchored to high-carbon industries

Determination of some toxic gaseous emissions at Ama Industrial ...

African Journals Online (AJOL)

Determination of some toxic gaseous emissions at Ama Industrial Complex, Enugu, south eastern Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... A study of some gases emitted from three industries at Ama industrial complex, Nigeria, was carried out ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

CO2 emissions and reduction potential in China's chemical industry

International Nuclear Information System (INIS)

Zhu, Bing; Zhou, Wenji; Hu, Shanying; Li, Qiang; Griffy-Brown, Charla; Jin, Yong

2010-01-01

GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO 2 emissions in the processes of chemical production in China through calculating the amounts of CO 2 emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO 2 emissions by promoting average technology performances in this industry.

European Union-Emission Trading Scheme: outlook for the chemical industry

International Nuclear Information System (INIS)

Coussy, P.; Alberola, E.

2013-01-01

From 2013, under the European Union Emissions Trading Scheme (EU-ETS), Europe will cap its emissions of nitrous oxide (N 2 O) and per-fluorocarbons (PFC) from the chemical industry. Besides, 336 chemical industry facilities will be forced to limit their emissions at 45.8 million tons of CO 2 per year from 2013 to 2020. At date August 1, 2012, almost 70% of the carbon credits issued by the clean development mechanism (CDM) were carried out mainly through the destruction of hydro-fluorocarbons (HFC-23) (42%) and N 2 O (22%). The contribution of emission reductions through chemical processes in the Joint Implementation (JI) projects is smaller but still amounted to 32% of all projects. From 1 May 2013 the European Union will refuse CDM and JI credits from emission reductions of HFC-23 and N 2 O. The issues of the introduction of the chemical industry in the EU-ETS in the context of low CO 2 prices and limited validity of CDM and JI chemical projects are high. Therefore, domestic CO 2 emissions reductions from energy consumption of the chemistry sector will take a larger share. (authors)

Estimation of Pre-industrial Nitrous Oxide Emission from the Terrestrial Biosphere

Science.gov (United States)

Xu, R.; Tian, H.; Lu, C.; Zhang, B.; Pan, S.; Yang, J.

2015-12-01

Nitrous oxide (N2O) is currently the third most important greenhouse gases (GHG) after methane (CH4) and carbon dioxide (CO2). Global N2O emission increased substantially primarily due to reactive nitrogen (N) enrichment through fossil fuel combustion, fertilizer production, and legume crop cultivation etc. In order to understand how climate system is perturbed by anthropogenic N2O emissions from the terrestrial biosphere, it is necessary to better estimate the pre-industrial N2O emissions. Previous estimations of natural N2O emissions from the terrestrial biosphere range from 3.3-9.0 Tg N2O-N yr-1. This large uncertainty in the estimation of pre-industrial N2O emissions from the terrestrial biosphere may be caused by uncertainty associated with key parameters such as maximum nitrification and denitrification rates, half-saturation coefficients of soil ammonium and nitrate, N fixation rate, and maximum N uptake rate. In addition to the large estimation range, previous studies did not provide an estimate on preindustrial N2O emissions at regional and biome levels. In this study, we applied a process-based coupled biogeochemical model to estimate the magnitude and spatial patterns of pre-industrial N2O fluxes at biome and continental scales as driven by multiple input data, including pre-industrial climate data, atmospheric CO2 concentration, N deposition, N fixation, and land cover types and distributions. Uncertainty associated with key parameters is also evaluated. Finally, we generate sector-based estimates of pre-industrial N2O emission, which provides a reference for assessing the climate forcing of anthropogenic N2O emission from the land biosphere.

Emissions control techniques applied to industrial vehicles

Energy Technology Data Exchange (ETDEWEB)

Martin, B.

2004-12-15

As emission standards for industrial vehicles become increasingly stringent, many research projects are seeking to develop after-treatment systems. These systems will have to combine efficiency, durability and low operating cost.

Compendium of Greenhouse Gas Emissions Estimation Methodologies for the Oil and Gas Industry

Energy Technology Data Exchange (ETDEWEB)

Shires, T.M.; Loughran, C.J. [URS Corporation, Austin, TX (United States)

2004-02-01

This document is a compendium of currently recognized methods and provides details for all oil and gas industry segments to enhance consistency in emissions estimation. This Compendium aims to accomplish the following goals: Assemble an expansive collection of relevant emission factors for estimating GHG emissions, based on currently available public documents; Outline detailed procedures for conversions between different measurement unit systems, with particular emphasis on implementation of oil and gas industry standards; Provide descriptions of the multitude of oil and gas industry operations, in its various segments, and the associated emissions sources that should be considered; and Develop emission inventory examples, based on selected facilities from the various segments, to demonstrate the broad applicability of the methodologies. The overall objective of developing this document is to promote the use of consistent, standardized methodologies for estimating GHG emissions from petroleum industry operations. The resulting Compendium documents recognized calculation techniques and emission factors for estimating GHG emissions for oil and gas industry operations. These techniques cover the calculation or estimation of emissions from the full range of industry operations - from exploration and production through refining, to the marketing and distribution of products. The Compendium presents and illustrates the use of preferred and alternative calculation approaches for carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) emissions for all common emission sources, including combustion, vented, and fugitive. Decision trees are provided to guide the user in selecting an estimation technique based on considerations of materiality, data availability, and accuracy. API will provide (free of charge) a calculation tool based on the emission estimation methodologies described herein. The tool will be made available at http://ghg.api.org/.

Green corridors and network design

DEFF Research Database (Denmark)

Panagakos, George

2016-01-01

The purpose of this chapter is to investigate the relation between the Trans-European Transport Network (TEN-T) and the green corridor concept. First, the need is established for a corridor governance structure that enables the close cooperation among the numerous stakeholders from both the public...

Uncertainty in estimating and mitigating industrial related GHG emissions

International Nuclear Information System (INIS)

El-Fadel, M.; Zeinati, M.; Ghaddar, N.; Mezher, T.

2001-01-01

Global climate change has been one of the challenging environmental concerns facing policy makers in the past decade. The characterization of the wide range of greenhouse gas emissions sources and sinks as well as their behavior in the atmosphere remains an on-going activity in many countries. Lebanon, being a signatory to the Framework Convention on Climate Change, is required to submit and regularly update a national inventory of greenhouse gas emissions sources and removals. Accordingly, an inventory of greenhouse gases from various sectors was conducted following the guidelines set by the United Nations Intergovernmental Panel on Climate Change (IPCC). The inventory indicated that the industrial sector contributes about 29% to the total greenhouse gas emissions divided between industrial processes and energy requirements at 12 and 17%, respectively. This paper describes major mitigation scenarios to reduce emissions from this sector based on associated technical, economic, environmental, and social characteristics. Economic ranking of these scenarios was conducted and uncertainty in emission factors used in the estimation process was emphasized. For this purpose, theoretical and experimental emission factors were used as alternatives to default factors recommended by the IPCC and the significance of resulting deviations in emission estimation is presented. (author)

Energy corridors European Union and Neighbouring countries

International Nuclear Information System (INIS)

Van Oostvoorn, F.; Hafner, Manfred; Vailati, Ricardo; Wietschel, Martin

2007-08-01

The ENCOURAGED (Energy corridor optimisation for European markets of gas, electricity and hydrogen) project has been launched in beginning 2005 to identify and assess the economically optimal energy corridors between European Union (EU) and neighbouring countries. The objectives of the project are to: Assess the economic optimal energy (electricity, gas and hydrogen) corridors and related network infrastructure for connecting the EU with its neighbouring countries and regions; Identify, quantify and evaluate the barriers to and potential benefits of building optimal energy corridors connecting the EU with its neighbours; Propose necessary policy measures to implement the recommended energy corridors with a focus on investment and the geopolitical framework; Organise stakeholder workshops and seminars to discuss the results and findings and reach consensus among scientists, stakeholders and non-governmental organizations and validate project results

High Prevalence of Tula Hantavirus in Common Voles in The Netherlands.

Science.gov (United States)

Maas, Miriam; de Vries, Ankje; van Roon, Annika; Takumi, Katsuhisa; van der Giessen, Joke; Rockx, Barry

2017-03-01

Tula virus (TULV) is a zoonotic hantavirus. Knowledge about TULV in the Netherlands is very scarce. Therefore in 2014, 49 common voles (Microtus arvalis) from a region in the south of the Netherlands, and in 2015, 241 common voles from regions in the north of the Netherlands were tested with the TULV quantitative RT-PCR. In the southern region, prevalence of TULV was 41% (20/49). In the northern regions, prevalence ranged from 12% (4/34) to 45% (17/38). Phylogenetic analysis of the obtained sequences showed that the regions fall within different clusters. Voles from the south were also tested on-site for the presence of hantavirus antibodies, but serology results were poorly associated with qRT-PCR results. These findings suggest that TULV may be more widespread than previously thought. No human TULV cases have been reported thus far in the Netherlands, but differentiation between infection by TULV or the closely related Puumala virus is not made in humans in the Netherlands, thus cases may be misdiagnosed.

Emission factor development for the malt beverage, wine, and distilled spirits industries

Energy Technology Data Exchange (ETDEWEB)

Lapp, T.; Shrager, B. [Midwest Research Institute, Cary, NC (United States); Safriet, D. [Environmental Protection Agency, Research Triangle Park, NC (United States)

1996-12-31

Midwest Research Institute is currently developing emission factors for inclusion in AP-42 Chapter 9, Food and Agricultural Industries. Three of the sections cover the production of malt beverages, wine, and distilled spirits. The malt beverage segment focuses on the development of ethanol emission factors for filling operations, which were recently identified as the large source of brewery ethanol emissions. The discussion includes a description of the production process and emissions factors for breweries, a history of emission factories for breweries, a description of emission testing conducted at two large breweries, and a presentation of some of the emission factors for malt beverage production. The wine industry segment focuses on emissions from the fermentation stage for red and white wines, the pomace screen and pomace press for red wines, and bottling of white wine. Emission factors are presented for ethanol emissions from each of these sources as well as other VOC emissions from the fermentation process. A discussion of the wine production process is presented. A discussion of the emission sources and available emission factors is presented for the distilled spirits industry segment. Factors are presented for the fermentation and aging stages. A process description is presented for the production of Bourbon whisky.

Effective strategies for comprehensive corridor management

Science.gov (United States)

2004-10-01

Despite the increasing importance of comprehensive corridor management at the state and local government level, questions remain regarding effective methods for developing and implementing corridor management plans. Further insight is also needed int...

Control of Atmospheric Emissions in the Wood Pulping Industry, Volume 3.

Science.gov (United States)

Hendrickson, E. R.; And Others

Volume 3 contains chapters 9 through 13 of the final report on the control of atmospheric emissions in the wood pulping industry. These chapters deal with the following topics: sampling and analytical techniques; on-going research related to reduction of emissions; research and development recommendations; current industry investment and operating…

Carbon soundings: greenhouse gas emissions of the UK music industry

Science.gov (United States)

Bottrill, C.; Liverman, D.; Boykoff, M.

2010-01-01

Over the past decade, questions regarding how to reduce human contributions to climate change have become more commonplace and non-nation state actors—such as businesses, non-government organizations, celebrities—have increasingly become involved in climate change mitigation and adaptation initiatives. For these dynamic and rapidly expanding spaces, this letter provides an accounting of the methods and findings from a 2007 assessment of greenhouse gas (GHG) emissions in the UK music industry. The study estimates that overall GHG emissions associated with the UK music market are approximately 540 000 t CO2e per annum. Music recording and publishing accounted for 26% of these emissions (138 000 t CO2e per annum), while three-quarters (74%) derived from activities associated with live music performances (400 000 t CO2e per annum). These results have prompted a group of music industry business leaders to design campaigns to reduce the GHG emissions of their supply chains. The study has also provided a basis for ongoing in-depth research on CD packaging, audience travel, and artist touring as well as the development of a voluntary accreditation scheme for reducing GHG emissions from activities of the UK music industry.

Carbon soundings: greenhouse gas emissions of the UK music industry

International Nuclear Information System (INIS)

Bottrill, C; Liverman, D; Boykoff, M

2010-01-01

Over the past decade, questions regarding how to reduce human contributions to climate change have become more commonplace and non-nation state actors-such as businesses, non-government organizations, celebrities-have increasingly become involved in climate change mitigation and adaptation initiatives. For these dynamic and rapidly expanding spaces, this letter provides an accounting of the methods and findings from a 2007 assessment of greenhouse gas (GHG) emissions in the UK music industry. The study estimates that overall GHG emissions associated with the UK music market are approximately 540 000 t CO 2 e per annum. Music recording and publishing accounted for 26% of these emissions (138 000 t CO 2 e per annum), while three-quarters (74%) derived from activities associated with live music performances (400 000 t CO 2 e per annum). These results have prompted a group of music industry business leaders to design campaigns to reduce the GHG emissions of their supply chains. The study has also provided a basis for ongoing in-depth research on CD packaging, audience travel, and artist touring as well as the development of a voluntary accreditation scheme for reducing GHG emissions from activities of the UK music industry.

Regional differences in the CO_2 emissions of China's iron and steel industry: Regional heterogeneity

International Nuclear Information System (INIS)

Xu, Bin; Lin, Boqiang

2016-01-01

Identifying the key influencing factors of CO_2 emissions in China's iron and steel industry is vital for mitigating its emissions and formulating effective environmental protection measures. Most of the existing researches utilized time series data to investigate the driving factors of the industry's CO_2 emission at the national level, but regional differences have not been given appropriate attention. This paper adopts provincial panel data from 2000 to 2013 and panel data models to examine the key driving forces of CO_2 emissions at the regional levels in China. The results show that industrialization dominates the industry's CO_2 emissions, but its effect varies across regions. The impact of energy efficiency on CO_2 emissions in the eastern region is greater than in the central and western regions because of a huge difference in R&D investment. The influence of urbanization has significant regional differences due to the heterogeneity in human capital accumulation and real estate development. Energy structure has large potential to mitigate CO_2 emissions on account of increased R&D investment in energy-saving technology and expanded clean energy use. Hence, in order to effectively achieve emission reduction, local governments should consider all these factors as well as regional heterogeneity in formulating appropriate mitigation policies. - Highlights: • We explore the driving forces of CO_2 emissions in China's steel industry. • Industrialization dominates CO_2 emissions in the iron and steel industry. • Energy structure has large potential to mitigate CO_2 emissions in the steel industry. • The influence of urbanization has significant regional differences.

I-880 Integrated Corridor Management Concept of Operation : Final Submittal: Concept of Operations for the I-880 Corridor in Oakland, California

Science.gov (United States)

2008-03-31

This report describes the draft Concept of Operations that has been developed for the Integrated Corridor Mobility (ICM) program by the I-880 corridor team. The I-880 corridor team has defined this Concept of Operations (ConOps) based on two primary ...

Electricity production and SO{sub 2} emissions in Poland`s power industry

Energy Technology Data Exchange (ETDEWEB)

Salay, J.

1996-09-01

The report analyzes how the Polish power industry`s electricity production and SO{sub 2} emissions have changed between 1988 and 1994. It examines to what extent the Polish government`s reform of air pollution control and its reorganization of the power industry affected power plant`s SO{sub 2} emissions in the same period. SO{sub 2} emissions from Polish power plants fell by 37% in 1988-1994. The drop in emissions was partly a result of the fall in economic activity and electricity production in the early 1990s. The main reasons for the emission reduction were the introduction of hard budget constraints, increased coal prices, and stricter enforcement of air pollution control. These reforms created strong incentives for power plants to switch to high-quality coal with lower sulfur content and higher heating value. Improved efficiency of electricity generation also contributed to the fall in SO{sub 2} emissions. 32 refs, 15 figs, 1 tab

Opportunities to reduce methane emissions in the natural gas industry

Energy Technology Data Exchange (ETDEWEB)

Cowgill, R.M. [Radian Corporation, Austin, TX (United States)

1995-12-31

The U.S. Environmental Protection Agency (EPA) and the Gas Research Institute (GRI) cofunded a project to quantify methane (CH{sub 4}) emissions from the U.S. natural gas industry. Methane, the major constituent of natural gas, is a potent greenhouse gas that is believed to increase the effect of global warming when released to the atmosphere. Reducing emissions from natural gas systems would lessen the greenhouse gas effect attributable to atmospheric CH{sub 4}. Further, mitigation methods to reduce emissions of natural gas, a marketable resource, could save money and increase energy efficiency. This presentation summarizes the major sources and quantity of methane being emitted to the atmosphere for all segments of the U.S. gas industry: production; processing; storage; transmission; and distribution. A description of how those emissions were determined is included here, as well as a discussion of which sources are potential candidates for reducing emissions. (author)

Opportunities to reduce methane emissions in the natural gas industry

Energy Technology Data Exchange (ETDEWEB)

Cowgill, R M [Radian Corporation, Austin, TX (United States)

1996-12-31

The U.S. Environmental Protection Agency (EPA) and the Gas Research Institute (GRI) cofunded a project to quantify methane (CH{sub 4}) emissions from the U.S. natural gas industry. Methane, the major constituent of natural gas, is a potent greenhouse gas that is believed to increase the effect of global warming when released to the atmosphere. Reducing emissions from natural gas systems would lessen the greenhouse gas effect attributable to atmospheric CH{sub 4}. Further, mitigation methods to reduce emissions of natural gas, a marketable resource, could save money and increase energy efficiency. This presentation summarizes the major sources and quantity of methane being emitted to the atmosphere for all segments of the U.S. gas industry: production; processing; storage; transmission; and distribution. A description of how those emissions were determined is included here, as well as a discussion of which sources are potential candidates for reducing emissions. (author)

Adverse effects of the automotive industry on carbon dioxide emissions

Directory of Open Access Journals (Sweden)

Mpho Bosupeng

2016-05-01

Full Text Available This study aims to determine the effects of the automotive industry on carbon dioxide emissions for the period from 1997 to 2010 for diverse economies, as well as the relationships between carbon dioxide discharges and output. The study applies cointegration and causality tests to validate these associations. The results of the Johansen cointegration test depict long-run associations between the quantity of passenger cars and carbon dioxide emissions in France, Sweden, Spain, Hungary and Japan. In addition, significant relations were observed between output and carbon dioxide discharges in Spain, Canada, India and Japan. Changes in output had substantial impact on emissions in Germany, Canada and India. The results also show that the number of passenger cars influences the magnitude of emissions in multiple economies. In conclusion, the automotive industry has to be considered in policies that aim to reduce carbon dioxide emissions.

Opportunities to reduce methane emissions in the natural gas industry

International Nuclear Information System (INIS)

Cowgill, R.M.

1995-01-01

The U.S. Environmental Protection Agency (EPA) and the Gas Research Institute (GRI) cofunded a project to quantify methane (CH 4 ) emissions from the U.S. natural gas industry. Methane, the major constituent of natural gas, is a potent greenhouse gas that is believed to increase the effect of global warming when released to the atmosphere. Reducing emissions from natural gas systems would lessen the greenhouse gas effect attributable to atmospheric CH 4 . Further, mitigation methods to reduce emissions of natural gas, a marketable resource, could save money and increase energy efficiency. This presentation summarizes the major sources and quantity of methane being emitted to the atmosphere for all segments of the U.S. gas industry: production; processing; storage; transmission; and distribution. A description of how those emissions were determined is included here, as well as a discussion of which sources are potential candidates for reducing emissions. (author)

Environmental emissions by Chinese industry: Exergy-based unifying assessment

International Nuclear Information System (INIS)

Bo Zhang; Chen, G.Q.; Xia, X.H.; Li, S.C.; Chen, Z.M.; Xi Ji

2012-01-01

Based on chemical exergy as an objective measure for the chemical deviation between the emission and the environment, a unifying assessment is carried out for major environmental emissions covering COD, ammonia nitrogen, SO 2 , soot, dust, NO x and solid waste by Chinese industry over 1997–2006, with emphasis on the sectoral and regional levels in 2006. Of the total emission in exergy up to 274.1 PJ in 2006, 67.7% is estimated from waste gases, 29.9% from waste water and 2.4% from solid waste. Five of 40 sectors and 12 of 30 regions are responsible for 72.7% and 65.5% of the total emission, respectively. SO 2 is the leading emission type in 9 sectors and 25 regions, and COD in another 28 sectors and 5 regions. Some pollution-intensive sectors such as Production and Distribution of Electric Power and Heat Power and Manufacture of Paper and Paper Products, and western and inland regions such as Guangxi and Ningxia with high emission intensities are identified. By clustering and disjoint principal component analysis with intensities of emissions and fuel coal use as variables, three principal components are extracted, and four statistically significant clusters are pinpointed in the sectoral and regional analysis. Corresponding policy-making implications are addressed. - Highlights: ► A chemical exergy-based unifying assessment for industrial emissions is performed. ► The emissions at the sectoral/regional levels in 2006 are systematically revealed. ► The main principal components and clusters for emission intensities are pinpointed.

Carbon soundings: greenhouse gas emissions of the UK music industry

Energy Technology Data Exchange (ETDEWEB)

Bottrill, C [Centre for Environmental Strategy, School of Engineering (D3), University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom); Liverman, D [Institute of the Environment, University of Arizona, Tucson, AZ 85721 (United States); Boykoff, M, E-mail: c.bottrill@surrey.ac.u, E-mail: liverman@u.arizona.ed, E-mail: boykoff@colorado.ed [CIRES Center for Science and Technology Policy, Environmental Studies and Geography, University of Colorado - Boulder, 1333 Grandview Ave, Campus Box 488, Boulder, CO 80309 (United States)

2010-01-15

Over the past decade, questions regarding how to reduce human contributions to climate change have become more commonplace and non-nation state actors-such as businesses, non-government organizations, celebrities-have increasingly become involved in climate change mitigation and adaptation initiatives. For these dynamic and rapidly expanding spaces, this letter provides an accounting of the methods and findings from a 2007 assessment of greenhouse gas (GHG) emissions in the UK music industry. The study estimates that overall GHG emissions associated with the UK music market are approximately 540 000 t CO{sub 2}e per annum. Music recording and publishing accounted for 26% of these emissions (138 000 t CO{sub 2}e per annum), while three-quarters (74%) derived from activities associated with live music performances (400 000 t CO{sub 2}e per annum). These results have prompted a group of music industry business leaders to design campaigns to reduce the GHG emissions of their supply chains. The study has also provided a basis for ongoing in-depth research on CD packaging, audience travel, and artist touring as well as the development of a voluntary accreditation scheme for reducing GHG emissions from activities of the UK music industry.

Assessing CO2 emissions in China’s iron and steel industry: A dynamic vector autoregression model

International Nuclear Information System (INIS)

Xu, Bin; Lin, Boqiang

2016-01-01

Highlights: • We explore the driving forces of the iron and steel industry’s CO 2 emissions in China. • Energy efficiency plays a dominant role in reducing carbon dioxide emissions. • Urbanization has significant effect on CO 2 emissions due to mass real estate construction. • The role of economic growth in reducing emissions is more important than industrialization. - Abstract: Energy saving and carbon dioxide emission reduction in China is attracting increasing attention worldwide. At present, China is in the phase of rapid urbanization and industrialization, which is characterized by rapid growth of energy consumption and carbon dioxide (CO 2 ) emissions. China’s steel industry is highly energy-consuming and pollution-intensive. Between 1980 and 2013, the carbon dioxide emissions in China’s steel industry increased approximately 11 times, with an average annual growth rate of 8%. Identifying the drivers of carbon dioxide emissions in the iron and steel industry is vital for developing effective environmental policies. This study uses Vector Autoregressive model to analyze the influencing factors of the changes in carbon dioxide emissions in the industry. The results show that energy efficiency plays a dominant role in reducing carbon dioxide emissions. Urbanization also has significant effect on CO 2 emissions because of mass urban infrastructure and real estate construction. Economic growth has more impact on emission reduction than industrialization due to the massive fixed asset investment and industrial energy optimization. These findings are important for the relevant authorities in China in developing appropriate energy policy and planning for the iron and steel industry.

Research on CO2 Emission Reduction Mechanism of China’s Iron and Steel Industry under Various Emission Reduction Policies

Directory of Open Access Journals (Sweden)

Ye Duan

2017-12-01

Full Text Available In this paper, a two-stage dynamic game model of China’s iron and steel industry is constructed. Carbon tax levy, product subsidy, carbon capture and sequestration (CCS and other factors are included in the emission reduction mechanism. The effects of emissions reduction and the economic impact of China’s overall steel industry (and that of its six main regions are investigated for the first time under different scenarios. As new findings, we report the following: (1 Not all factors declined. The overall social welfare, consumer surplus, output and emissions decrease with a gradual increase in the reduction target, whereas the carbon tax value, unit value of product subsidies and total subsidies show a rising trend; (2 A combination of multiple emissions reduction policies is more effective than a single policy. With the implementation of a combined policy, regional output polarization has eased; (3 Steel output does not exceed 950 million tons, far below the current peak. These results will help the industry to formulate reasonable emissions reduction and output targets. In short, in effort to eliminate industry poverty and to alleviate overcapacity, the industry should not only adopt the various coordinated reduction policies, but also fully consider regional differences and reduction needs.

Decoupling of industrial energy consumption and CO2-emissions in energy-intensive industries in Scandinavia

International Nuclear Information System (INIS)

Enevoldsen, Martin K.; Ryelund, Anders V.; Andersen, Mikael Skou

2007-01-01

As methodology the ex-post analysis deserves more attention as a device to calibrate energy sector models. This paper studies the impact of energy prices and taxes on energy efficiency and carbon emissions of ten industrial sectors in the three Scandinavian countries. A database with sector-specific energy prices and taxes has been established, which allows the analysis to take various price reductions and tax exemptions better into account. A translog factor demand system estimation for a cross industry pooled model is explored and fixed effects across industries and time is estimated. The findings here confirm recent analyses which indicate higher long-term elasticities for industries than normally assumed in Scandinavian energy-sector models. With the observations on differences in energy-intensities among sectors and countries the findings allow for some optimism as to the opportunities for further decoupling between trends in gross value added, carbon emissions and energy consumption

Achieving carbon emission reduction through industrial and urban symbiosis: A case of Kawasaki

International Nuclear Information System (INIS)

Dong, Huijuan; Ohnishi, Satoshi; Fujita, Tsuyoshi; Geng, Yong; Fujii, Minoru; Dong, Liang

2014-01-01

Industry and fossil fuel combustion are the main sources for urban carbon emissions. Most studies focus on energy consumption emission reduction and energy efficiency improvement. Material saving is also important for carbon emission reduction from a lifecycle perspective. IS (Industrial symbiosis) and U r S (urban symbiosis) have been effective since both of them encourage byproduct exchange. However, quantitative carbon emission reduction evaluation on applying them is still lacking. Consequently, the purpose of this paper is to fill such a gap through a case study in Kawasaki Eco-town, Japan. A hybrid LCA model was employed to evaluate to the lifecycle carbon footprint. The results show that lifecycle carbon footprints with and without IS and U r S were 26.66 Mt CO 2 e and 30.92 Mt CO 2 e, respectively. The carbon emission efficiency was improved by 13.77% with the implementation of IS and U r S. The carbon emission reduction was mainly from “iron and steel” industry, cement industry and “paper making” industry, with figures of 2.76 Mt CO 2 e, 1.16 Mt CO 2 e and 0.34 Mt CO 2 e, respectively. Reuse of scrape steel, blast furnace slag and waste paper are all effective measures for promoting carbon emission reductions. Finally, policy implications on how to further promote IS and U r S are presented. - Highlights: • We evaluate carbon emission reduction of industrial and urban symbiosis (IS/U r S). • Hybrid LCA model was used to evaluate lifecycle carbon footprint. • Carbon emission efficiency was improved by 13.77% after applying IS/U r S. • The importance of U r S in responding carbon reduction was addressed in the paper

Improved Fossil/Industrial CO2 Emissions Modeling for the North American Carbon Program

Science.gov (United States)

Gurney, K. R.; Seib, B.; Mendoza, D.; Knox, S.; Fischer, M.; Murtishaw, S.

2006-12-01

The quantification of fossil fuel CO2 emissions has implications for a wide variety of scientific and policy- related questions. Improvement in inverse-estimated carbon fluxes, country-level carbon budgeting, analysis of regional emissions trading systems, and targeting of observational systems are all important applications better served by improvements in understanding where and when fossil fuel/industrial CO2 is emitted. Traditional approaches to quantifying fossil/industrial CO2 emissions have relied on national sales/consumption of fossil fuels with secondary spatial footprints performed via proxies such as population. This approach has provided global spatiotemporal resolution of one degree/monthly. In recent years the need has arisen for emission estimates that not only achieve higher spatiotemporal scales but include a process- level component. This latter attribute provides dynamic linkages between energy policy/decisionmaking and emissions for use in projecting changes to energy systems and the implications these changes may have on climate change. We have embarked on a NASA-funded research strategy to construct a process-level fossil/industrial CO2 emissions model/database for North America that will resolve fossil/industrial CO2 emissions hourly and at 36 km. This project is a critical component of the North American Carbon Program. Our approach builds off of many decades of air quality monitoring for regulated pollutants such as NOx, VOCs and CO that has been performed by regional air quality managers, states, and the Environmental Protection Agency in the United States. By using the highly resolved monitoring data supplied to the EPA, we have computed CO2 emissions for residential, commercial/industrial, transportation, and biogenic sources. This effort employs a new emissions modeling system (CONCEPT) that spatially and temporally distributes the monitored emissions across the US. We will provide a description of the methodology we have employed, the

RADIATION HYGIENIC MONITORING AND ASSESSMENT OF POPULATION DOSES IN RADIOACTIVELY CONTAMINATED AREAS OF TULA REGION

Directory of Open Access Journals (Sweden)

T. M. Chichura

2016-01-01

Full Text Available The goal. The analyses of radiation hygienic monitoring conducted in Tula region territories affected by the Chernobyl NPP accident regarding cesium-137 and strontium- 90 in the local foodstuffs and the analyses of populational annual effective dose. The materials and methods. The survey was conducted in Tula Region since 1997 to 2015. Over that period, more than fifty thousand samples of the main foodstuffs from the post-Chernobyl contaminated area were analyzed. Simultaneously with that, the external gamma - radiation dose rate was measured in the fixed control points. The dynamics of cesium -137 and strontium-90 content in foodstuffs were assessed along with the maximum values of the mean annual effective doses to the population and the contribution of the collective dose from medical exposures into the structure of the annual effective collective dose to the population. The results. The amount of cesium-137 and strontium -90 in the local foodstuffs was identified. The external gamma- radiation dose rate values were found to be stable and not exceeding the natural fluctuations range typical for the middle latitudes of Russia’s European territory. The maximum mean annual effective dose to the population reflects the stable radiation situation and does not exceed the permissible value of 1 mSv. The contribution of the collective dose from medical exposures of the population has been continuously reducing as well as the average individual dose to the population per one medical treatment under the annual increase of the medical treatments quantities. The conclusion. There is no exceedance of the admissible levels of cesium-137 and strontium- 90 content in the local foodstuffs. The mean annual effective dose to the population has decreased which makes it possible to transfer the settlements affected by the Chernobyl NPP accident to normal life style. This is covered by the draft concept of the settlements’ transfer to normal life style.

Improving the technology of purification of gas emissions petrochemical industries

OpenAIRE

USMANOVA R.R.; ZAIKOV G.E.

2014-01-01

The technology of cleaning of gas emissions flares in the production of synthetic rubber. Developed dynamic scrubber for scrubbing gas emissions. Complex studies served as the basis for the design of an air purification system of industrial premises. Purification of gas emissions before combustion in flares has significantly reduced air pollution by toxic substances.

Reclaiming deserted corridors: Rights of way as common property resources

International Nuclear Information System (INIS)

Brown, D.T.

1993-01-01

In Canada, power line transmission corridors are administered and maintained by provincial crown utilities. These corridors have fragmented natural habitats, destroyed biota, and disrupted geological and hydrologic systems. The practices used by utilities to maintain their rights-of-way tend to worsen the environmental and social context of the localities affected by the corridors. If the corridors are considered as common resources, and if co-management of these resources is undertaken involving the utilities and the communities affected by the corridors, public rights-of-way would be created which would have environmental benefits. These corridors would have a recreational potential and could be managed so as to reduce considerably the negative impacts presently generated by current right-of-way management practices. The use of local residents in this management process could ensure that the use of the corridors harmonizes with local needs. Among the obstacles to the co-management of these corridors are the badly defined policies of secondary land use, the restrictions on vegetation maintenance in utility corridors, lengthy approvals processes, and concerns about public liability. To make co-management of these corridors a reality, new policy structures and new procedures have to be developed in cooperation with the utilities and the affected communities. 14 refs., 1 fig

Greatly reduced emission of greenhouse gases from the wood-processing industry

International Nuclear Information System (INIS)

2004-01-01

The strong support for biomass energy in the Norwegian wood-processing industry during the last 10-15 years has contributed greatly to a considerable reduction of the emission of greenhouse gases. The potential for further reductions is primarily linked with the use of oil and involves only a few works. Oil can be replaced by other fuels, and process-technical improvements can reduce the emissions. According to prognoses, emissions will go on decreasing until 2007, when the total emission of greenhouse gases from the wood-processing industry will be about 13 per cent less than in 1998. Carbon dioxide (CO 2 ) amounts to 90 per cent of the total emission, the remaining parts being methane (CH 4 ) from landfills and dumps, and small amounts of N 2 O

Reduction of greenhouse gas in power industry by emission trading system

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun Myung; Lee, Kee Hoon [Korea Energy Economics Institute, Euiwang (Korea)

1999-04-01

The rules governing their implementation and operation for implementing the Kyoto Protocol including emissions permit trading, project-based credit trading and the Clean Development Mechanism are to be decided at future talks. How these policies are eventually designed will determine the effectiveness of the Protocol. However, it has been passive and insufficient to deal with the Kyoto Protocol since there is no obligation on reduction of greenhouse gas emissions. Therefore, the issues on emissions permit trading are analyzed and the strategies for utilizing the Kyoto mechanism effectively are presented through reviewing the existing negotiation strategies. Moreover, how to use emissions permit trading in the power industry, the largest greenhouse gas emissions industry, is examined by dividing into two sections, domestic and abroad. (author). 62 refs., 2 figs., 42 tabs.

Energy consumption and CO2 emissions of the European glass industry

International Nuclear Information System (INIS)

Schmitz, Andreas; Kaminski, Jacek; Maria Scalet, Bianca; Soria, Antonio

2011-01-01

An in-depth analysis of the energy consumption and CO 2 emissions of the European glass industry is presented. The analysis is based on data of the EU ETS for the period 2005-2007 (Phase I). The scope of this study comprises the European glass industry as a whole and its seven subsectors. The analysis is based on an assignment of the glass installations (ca. 450) within the EU ETS to the corresponding subsectors and an adequate matching of the respective production volumes. A result is the assessment of the overall final energy consumption (fuel, electricity) as well as the overall CO 2 emissions (process, combustion and indirect emissions) of the glass industry and its subsectors in the EU25/27. Moreover, figures on fuel mix as well as fuel intensity and CO 2 emissions intensity (i.e. carbon intensity) are presented for each of the subsectors on aggregated levels and for selected EU Member States separately. The average intensity of fuel consumption and direct CO 2 emissions of the EU25 glass industry decreased from 2005 to 2007 by about 4% and amounted in 2007 to 7.8 GJ and 0.57 t CO 2 per tonne of saleable product, respectively. The economic energy intensity was evaluated with 0.46 toe/1000 Euro (EU27).

Long Island Smart Energy Corridor

Energy Technology Data Exchange (ETDEWEB)

Mui, Ming [Long Island Power Authority, Uniondale, NY (United States)

2015-02-04

settings. Farmingdale State College held three international conferences on energy and sustainability and Smart Grid related technologies and policies. These conferences, in addition to public seminars increased understanding and acceptance of Smart Grid transformation by the general public, business, industry, and municipalities in the Long Island and greater New York region. - JOB CREATION: Provided training for the Smart Grid and clean energy jobs of the future at both Farmingdale and Stony Brook. Stony Brook focused its “Cradle to Fortune 500” suite of economic development resources on the opportunities emerging from the project, helping to create new technologies, new businesses, and new jobs. To achieve these features, LIPA and its sub-recipients, FSC and SBU, each have separate but complementary objectives. At LIPA, the Smart Energy Corridor (1) meant validating Smart Grid technologies; (2) quantifying Smart Grid costs and benefits; and (3) providing insights into how Smart Grid applications can be better implemented, readily adapted, and replicated in individual homes and businesses. LIPA installed 2,550 AMI meters (exceeding the 500 AMI meters in the original plan), created three “smart” substations serving the Corridor, and installed additional distribution automation elements including two-way communications and digital controls over various feeders and capacitor banks. It gathered and analyzed customer behavior information on how they responded to a new “smart” TOU rate and to various levels of information and analytical tools.

Comprehensive highway corridor planning with sustainability indicators.

Science.gov (United States)

2011-10-01

"The Maryland State Highway Administration (SHA) has initiated major planning efforts to improve transportation : efficiency, safety, and sustainability on critical highway corridors through its Comprehensive Highway Corridor : (CHC) program. This pr...

[Analysis on oil fume particles in catering industry cooking emission].

Science.gov (United States)

Tan, De-Sheng; Kuang, Yuan-Cheng; Liu, Xin; Dai, Fei-Hong

2012-06-01

By measuring the particulate matter of oil fume which is over 10 microm or below 10 microm separately and using microradiography and Electrical Low Pressure Impactor (ELPI), it is found out the distributing characteristic of oil fume particles in catering industry cooking emission. The result shows that the diameter of the oil fume particles which was sedimentated in the kitchen is between 10-400 microm, the concentration peak value is between 10-100 microm. The diameter of oil fume aerosol is mostly smaller than 1 microm, while the concentration peak value is between 0.063-0.109 microm. In addition, the mass concentration peak value is between 6.560-9.990 microm. Through the analysis to the physical characteristics of oil fume from catering industry cooking emissions, the eigenvalue of the oil fume has been found and the feature matter for monitoring the oil fume has been discovered to provide a reasonable standard for controlling and monitoring the catering industry cooking emission.

CO_2 emissions and energy intensity reduction allocation over provincial industrial sectors in China

International Nuclear Information System (INIS)

Wu, Jie; Zhu, Qingyuan; Liang, Liang

2016-01-01

Highlights: • DEA is used to evaluate the energy and environmental efficiency of 30 provincial industrial sector in China. • A new DEA-based model is proposed to allocate the CO_2 emissions and energy intensity reduction targets. • The context-dependent DEA is used to characterize the production plans. - Abstract: High energy consumption by the industry of developing countries has led to the problems of increasing emission of greenhouse gases (GHG) (primarily CO_2) and worsening energy shortages. To address these problems, many mitigation measures have been utilized. One major measure is to mandate fixed reductions of GHG emission and energy consumption. Therefore, it is important for each developing country to disaggregate their national reduction targets into targets for various geographical parts of the country. In this paper, we propose a DEA-based approach to allocate China’s national CO_2 emissions and energy intensity reduction targets over Chinese provincial industrial sectors. We firstly evaluate the energy and environmental efficiency of Chinese industry considering energy consumption and GHG emissions. Then, considering the necessity of mitigating GHG emission and energy consumption, we develop a context-dependent DEA technique which can better characterize the changeable production with reductions of CO_2 emission and energy intensity, to help allocate the national reduction targets over provincial industrial sectors. Our empirical study of 30 Chinese regions for the period 2005–2010 shows that the industry of China had poor energy and environmental efficiency. Considering three major geographical areas, eastern China’s industrial sector had the highest efficiency scores while in this aspect central and western China were similar to each other at a lower level. Our study shows that the most effective allocation of the national reduction target requires most of the 30 regional industrial to reduce CO_2 emission and energy intensity, while a

The improvement of CO2 emission reduction policies based on system dynamics method in traditional industrial region with large CO2 emission

International Nuclear Information System (INIS)

Li, Fujia; Dong, Suocheng; Li, Zehong; Li, Yu; Li, Shantong; Wan, Yongkun

2012-01-01

Some traditional industrial regions are characterized by high industrial proportion and large CO 2 emission. They are facing dual pressures of maintaining economic growth and largely reducing CO 2 emission. From the perspective of study of typological region, taking the typical traditional industrial region—Liaoning Province of China as a case, this study establishes a system dynamics model named EECP and dynamically simulates CO 2 emission trends under different conditions. Simulation results indicate, compared to the condition without CO 2 emission reduction policies, CO 2 emission intensity under the condition of implementing CO 2 emission reduction policies of “Twelfth Five-Year Plan” is decreased by 11% from 2009 to 2030, but the economic cost is high, making the policies implementation faces resistance. Then some improved policies are offered and proved by EECP model that they can reduce CO 2 emission intensity after 2021 and decrease the negative influence to GDP, realizing the improvement objects of reducing CO 2 emission and simultaneously keeping a higher economy growth speed. The improved policies can provide reference for making and improving CO 2 emission reduction policies in other traditional industrial regions with large CO 2 emission. Simultaneously, EECP model can provide decision-makers with reference and help for similar study of energy policy. - Highlights: ► We build EECP model for CO 2 emission reduction study in traditional industry region. ► By the model, we simulate CO 2 emission trend and improve emission reduction policy. ► By improvement, both CO 2 emission intensity and economic cost can be largely reduced. ► Besides CO 2 emission is reduced effectively, higher GDP increment speed is kept. ► EECP model can be widely used for making and improving regional energy policies.

Comparing Non-Steady State Emissions under Start-Up and Shut-Down Operating Conditions with Steady State Emissions for Several Industrial Sectors: A Literature Review

Directory of Open Access Journals (Sweden)

Juwairia Obaid

2017-02-01

Full Text Available This study investigates the emissions of various industrial facilities under start-up, shut-down, and normal operations. The industries that have been investigated include power and/or heat generation, energy-from-waste generation, nuclear power generation, sulphuric acid production, ethylene production, petrochemical production, and waste incineration. The study investigated multiple facilities worldwide for each of these industrial categories. The different potential contaminants characteristic of each industry type have been investigated and the emissions of these contaminants under non-steady state have been compared to the steady state emissions. Where available, trends have been developed to identify the circumstances, i.e., the industrial sector and contaminant, under which the assessment and consideration of emissions from start-up and shut-down events is necessary for each industry. These trends differ by industrial sector and contaminant. For example, the study shows that sulphur dioxide (SO2 emissions should be assessed for the start-up operations of sulphuric acid production plants, but may not need to be assessed for the start-up operations of a conventional power generation facility. The trends developed as part of this research paper will help air permit applicants to effectively allocate their resources when assessing emissions related to non-steady state operations. Additionally, it will ensure that emissions are assessed for the worst-case scenario. This is especially important when emissions under start-up and shut-down operations have the potential to exceed enforceable emission limits. Thus, assessing emissions for the worst-case scenario can help in preventing the emissions from adversely impacting public health and the environment.

76 FR 34139 - Northeast Corridor Safety Committee; Meeting Postponement

Science.gov (United States)

2011-06-10

.... 2] Northeast Corridor Safety Committee; Meeting Postponement AGENCY: Federal Railroad Administration... announced the first meeting of the Northeast Corridor Safety Committee, a Federal Advisory Committee... future date. DATES: The meeting of the Northeast Corridor Safety Committee scheduled to commence on...

Emissions from Power Plant and Industrial Boiler Sector

Data.gov (United States)

U.S. Environmental Protection Agency — This asset provides hourly data on SO2, NOx, and CO2 emissions; gross load, steam load, and heat input; from electricity generation units and industrial boilers from...

Greenhouse gas emissions from production chain of a cigarette manufacturing industry in Pakistan

International Nuclear Information System (INIS)

Hussain, Majid; Zaidi, Syed Mujtaba Hasnian; Malik, Riffat Naseem; Sharma, Benktesh Dash

2014-01-01

This study quantified greenhouse gas (GHG) emissions from the Pakistan Tobacco Company (PTC) production using a life cycle approach. The PTC production chain comprises of two phases: agricultural activities (Phase I) and industrial activities (Phase II). Data related to agricultural and industrial activities of PTC production chain were collected through questionnaire survey from tobacco growers and records from PTC manufacturing units. The results showed that total GHG emissions from PTC production chain were 44,965, 42,875, and 43,839 tCO 2 e respectively in 2009, 2010, and 2011. Among the agricultural activities, firewood burning for tobacco curing accounted for about 3117, 3565, and 3264 tCO 2 e, fertilizer application accounted for 754, 3251, and 4761 tCO 2 e in 2009, 2010, and 2011, respectively. Among the industrial activities, fossil fuels consumption in stationary sources accounted for 15,582, 12,733, and 13,203 tCO 2 e, fossil fuels used in mobile sources contributed to 2693, 3038, and 3260 tCO 2 e, and purchased electricity consumed resulted in 15,177, 13,556, and 11,380 tCO 2 e in 2009, 2010, and 2011, respectively. The GHG emissions related to the transportation of raw materials and processed tobacco amounted to 6800, 6301, and 7317 respectively in 2009, 2010, and 2011. GHG emissions from energy use in the industrial activities constituted the largest emissions (i.e., over 80%) of GHG emissions as PTC relies on fossil fuels and fossil fuel based electrical power in industrial processes. The total emissions of carbon footprint (CFP) from PTC production were 0.647 tCO 2 e per million cigarettes produced in 2009, 0.675 tCO 2 e per million cigarettes in 2010 and 0.59 tCO 2 e per million cigarettes in 2011. Potential strategies for GHG emissions reductions for PTC production chain include energy efficiency, reducing reliance on fossil fuels in non-mobile sources, adoption of renewable fuels including solar energy, energy from crop residues, and promotion of

Greenhouse gas emissions from production chain of a cigarette manufacturing industry in Pakistan

Energy Technology Data Exchange (ETDEWEB)

Hussain, Majid, E-mail: majid_qau86@yahoo.com [Environmental Biology and Ecotoxicology Laboratory, Department of Environmental Sciences, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Department of Forestry and Wildlife Management, University of Haripur, Hattar Road, Khyber Pakhtunkhwa, Haripur 22620 (Pakistan); Zaidi, Syed Mujtaba Hasnian [Leaf Agronomy Manager, Pakistan Tobacco Company, Akora Khattak Factory, P.O. and District Nowshera, Khyber Pakhtunkhwa (Pakistan); Malik, Riffat Naseem, E-mail: r_n_malik2000@yahoo.co.uk [Environmental Biology and Ecotoxicology Laboratory, Department of Environmental Sciences, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Sharma, Benktesh Dash [University of California, Berkeley, California 94720 (United States)

2014-10-15

This study quantified greenhouse gas (GHG) emissions from the Pakistan Tobacco Company (PTC) production using a life cycle approach. The PTC production chain comprises of two phases: agricultural activities (Phase I) and industrial activities (Phase II). Data related to agricultural and industrial activities of PTC production chain were collected through questionnaire survey from tobacco growers and records from PTC manufacturing units. The results showed that total GHG emissions from PTC production chain were 44,965, 42,875, and 43,839 tCO{sub 2}e respectively in 2009, 2010, and 2011. Among the agricultural activities, firewood burning for tobacco curing accounted for about 3117, 3565, and 3264 tCO{sub 2}e, fertilizer application accounted for 754, 3251, and 4761 tCO{sub 2}e in 2009, 2010, and 2011, respectively. Among the industrial activities, fossil fuels consumption in stationary sources accounted for 15,582, 12,733, and 13,203 tCO{sub 2}e, fossil fuels used in mobile sources contributed to 2693, 3038, and 3260 tCO{sub 2}e, and purchased electricity consumed resulted in 15,177, 13,556, and 11,380 tCO{sub 2}e in 2009, 2010, and 2011, respectively. The GHG emissions related to the transportation of raw materials and processed tobacco amounted to 6800, 6301, and 7317 respectively in 2009, 2010, and 2011. GHG emissions from energy use in the industrial activities constituted the largest emissions (i.e., over 80%) of GHG emissions as PTC relies on fossil fuels and fossil fuel based electrical power in industrial processes. The total emissions of carbon footprint (CFP) from PTC production were 0.647 tCO{sub 2}e per million cigarettes produced in 2009, 0.675 tCO{sub 2}e per million cigarettes in 2010 and 0.59 tCO{sub 2}e per million cigarettes in 2011. Potential strategies for GHG emissions reductions for PTC production chain include energy efficiency, reducing reliance on fossil fuels in non-mobile sources, adoption of renewable fuels including solar energy, energy

Opportunity Analysis for Recovering Energy from Industrial Waste Heat and Emissions

Energy Technology Data Exchange (ETDEWEB)

Viswanathan, V. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Davies, R. W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Holbery, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2006-04-01

This report analyzes the opportunity to recover chemical emissions and thermal emissions from U.S. industry. It also analyzes the barriers and pathways to more effectively capitalize on these opportunities.

Using LMDI to Analyze the Decoupling of Carbon Dioxide Emissions from China’s Heavy Industry

Directory of Open Access Journals (Sweden)

Lin Boqiang

2017-07-01

Full Text Available China is facing huge pressure on CO2 emissions reduction. The heavy industry accounts for over 60% of China’s total energy consumption, and thus leads to a large number of energy-related carbon emissions. This paper adopts the Log Mean Divisia Index (LMDI method based on the extended Kaya identity to explore the influencing factors of CO2 emissions from China’s heavy industry; we calculate the trend of decoupling by presenting a theoretical framework for decoupling. The results show that labor productivity, energy intensity, and industry scale are the main factors affecting CO2 emissions in the heavy industry. The improvement of labor productivity is the main cause of the increase in CO2 emissions, while the decline in energy intensity leads to CO2 emissions reduction, and the industry scale has different effects in different periods. Results from the decoupling analysis show that efforts made on carbon emission reduction, to a certain extent, achieved the desired outcome but still need to be strengthened.

Analysis of the impacts of combining carbon taxation and emission trading on different industry sectors

International Nuclear Information System (INIS)

Lee, Cheng F.; Lin, Sue J.; Lewis, Charles

2008-01-01

Application of price mechanisms has been the important instrument for carbon reduction, among which the carbon tax has been frequently advocated as a cost-effective economic tool. However, blanket taxes applied to all industries in a country might not always be fair or successful. It should therefore be implemented together with other economic tools, such as emission trading, for CO 2 reduction. This study aims to analyze the impacts of combining a carbon tax and emission trading on different industry sectors. Results indicate that the 'grandfathering rule (RCE2000)' is the more feasible approach in allocating the emission permit to each industry sector. Results also find that the accumulated GDP loss of the petrochemical industry by the carbon tax during the period 2011-2020 is 5.7%. However, the accumulated value of GDP will drop by only 4.7% if carbon taxation is implemented together with emission trading. Besides, among petrochemical-related industry sectors, up-stream sectors earn profit from emission trading, while down-stream sectors have to purchase additional emission permits due to failure to achieve their emission targets

Process industry energy retrofits: the importance of emission baselines for greenhouse gas reductions

International Nuclear Information System (INIS)

Aadahl, Anders; Harvey, Simon; Berntsson, Thore

2004-01-01

Fuel combustion for heat and/or electric power production is often the largest contributor of greenhouse gas (GHG) emissions from an industrial process plant. Economically feasible options to reduce these emissions include fuel switching and retrofitting the plant's energy system. Process integration methods and tools can be used to evaluate potential retrofit measures. For assessing the GHG emissions reduction potential for the measures considered, it is also necessary to define appropriate GHG emission baselines. This paper presents a systematic GHG emission calculation method for retrofit situations including improved heat exchange, integration of combined heat and power (CHP) units, and combinations of both. The proposed method is applied to five different industrial processes in order to compare the impact of process specific parameters and energy market specific parameters. For potential GHG emission reductions the results from the applied study reveal that electricity grid emissions are significantly more important than differences between individual processes. Based on the results of the study, it is suggested that for sustainable investment decision considerations a conservative emission baseline is most appropriate. Even so, new industrial CHP in the Northern European energy market could play a significant role in the common effort to decrease GHG emissions

76 FR 72029 - Multistate Corridor Operations and Management Program

Science.gov (United States)

2011-11-21

... in the FHWA Multistate Corridor Operations and Management Program as authorized in 23 U.S.C. 511... Multistate Corridor Operations and Management Program as authorized in 23 U.S.C. 511. This notice clarifies... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Multistate Corridor Operations and...

Research on carbon emission driving factors of China’s provincial construction industry

Science.gov (United States)

Shang, Mei; Dong, Rui; Fu, Yujie; Hao, Wentao

2018-03-01

As a pillar industry of the national economy, the damage to the environment by construction industry can not be ignored. In the context of low carbon development, identifying the main driving factors for the carbon emission of the provincial construction industry are the key for the local government to formulate the development strategy for construction. In the paper, based on the Kaya factor decomposition method, the carbon intensity of the energy structure, energy intensity and the impact of the construction output on the carbon emission of provincial construction industry are studied, and relevant suggestions for low carbon development of provincial construction industry are proposed. The conclusion of this paper provides a theoretical basis for the early realization of low-carbon development in China’s provincial construction industry.

Analysis of the Relationship between China’s IPPU CO2 Emissions and the Industrial Economic Growth

Directory of Open Access Journals (Sweden)

Ye Duan

2016-04-01

Full Text Available According to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (IPCC 2006 and based on the production technology and products, this paper has calculated CO2 emissions from industrial processes and product use (IPPU, which involves the individual and the summation of five major IPUU CO2 emissions industrial departments. As there is a classic environmental Kuznets curve between IPPU CO2 emissions and the economy, this paper discusses the relationship based on the calculation results and the actual situation. The results show that the overall emission level is indeed rising yearly, and that steel and iron alloy manufacturing and nonmetal manufacturing occupy about 80% of the total emissions. The IPPU CO2 emissions and the corresponding gross industrial output value do not present a classic Kuznets curve in most industrial sectors due to the increasing industrial employed population. The year 2002 appears to be the boundary instead, where prior to 2002, there is a relatively stable function-type growth curve and after 2002, gross industrial output value (GIOV per employed person remained within a certain interval while IPPU CO2 emissions per employed dipped slightly then increased again. Some, but not all, industrial departments and the combined emissions of per employed person reached maximum values in 2012.

Corridor Length and Patch Colonization by a Butterfly Junonia coenia

Energy Technology Data Exchange (ETDEWEB)

Nick Haddad

2000-06-01

Habitat corridors have been proposed to reduce patch isolation and increase population persistence in fragmented landscapes. This study tested whether patch colonization was increased by the presence and various length corridors. The specific butterfly species tested has been shown to use corridors, however, the results indicate that neither the distance between patches or the presence of a corridor influenced colonization.

Corridor X in Serbia: Approach to spatial planning

Directory of Open Access Journals (Sweden)

Milijić Saša

2003-01-01

Full Text Available For the infrastructural corridor's area, of the national importance, is predicted making spatial plans of area of special use, as the most complex instruments for the developing and arranging management of these areas. These plans should have an integrative and problem-oriented approach towards development planning and arrangement of such an area, and it is obliged to include: a complex evaluation of state and function of infrastructural system in the corridor; an analysis of infrastructural corridor influence on the development of the planning area and its surrounding; an alternative conception of long-term protection, improvement, organization and use of the planning area; a choice of the priorities and assumption of the realization phases; instructions for the implementation of the plan etc. The approach in making of this category of plans, as well as, experiences in planning, arrangement and use of multimodal corridors, have been considered on the example of Spatial plan of the infrastructural corridor E-75 section Belgrade-Nis area.

International comparison of CO2 emission trends in the iron and steel industry

International Nuclear Information System (INIS)

Yeonbae, Kim; Worrell, E.

2002-01-01

In this paper, we present an in-depth decomposition analysis of trends in CO 2 emissions in the iron and steel industry using physical indicators. Physical indicators allow a detailed analysis of intra- sectoral trends, in contrast to the mostly used monetary indicators. Detailed decomposition analysis makes it possible to link developments in energy intensity to technology change and (indirectly) to policy. We present an analysis for the iron and steel industry in seven countries, i.e. Brazil, China, India (developing countries), Mexico and South Korea (newly industrialized countries) and the United States (industrialized country). We found substantial differences in energy efficiency among these countries. In most countries the increased (or decreased) production was the main contributor to changes in CO 2 emissions, while energy-efficiency was the main factor reducing emission intensities of steel production in almost all countries. Changes in power generation contributed to a reduction of specific emissions in the case of South Korea only. (Author)

Integrated assessment of exergy, energy and carbon dioxide emissions in an iron and steel industrial network

International Nuclear Information System (INIS)

Wu, Junnian; Wang, Ruiqi; Pu, Guangying; Qi, Hang

2016-01-01

Highlights: • Exergy, energy and CO_2 emissions assessment of iron and steel industrial network. • Effects of industry symbiosis measures on exergy, energy and CO_2 emissions. • Exploring the environmental impact from exergy losses. • The overall performance indexes are proposed for iron and steel industrial network. • Sinter strand and the wet quenching process have the lowest exergy efficiency. - Abstract: Intensive energy consumption and high pollution emissions in the iron and steel industry have caused problems to the energy system, in the economy, and in the environment. Iron and steel industrial network as an example of energy conservation and emissions reduction, require better analysis and assessment. The present study comprehensively assesses an iron and steel industrial network and its environmental performance with respect to exergy, energy and CO_2 emissions. The results show that the sinter strand needs to be greatly improved and the wet quenching process needs to be completely redesigned. The overall exergy efficiency and energy efficiency can be improved by adopting industrial symbiosis (IS) measures. We found that adjusting the energy structure to use renewable energy and recycling solid waste can greatly reduce CO_2 emissions. Moreover, the maximum exergy losses occurred in the blast furnace with the maximum CO_2 emissions. The iron making plant exerted a strong effect on the environment based on the equivalent CO_2 emission potentials. Many performance indicators of the entire industrial network were also examined in this work. It can be seen that integrated evaluation of energy and CO_2 emissions with exergy is necessary to help to mitigate adverse environmental impacts and more effectively fulfill the goals for energy conservation and emissions reduction.

Evaluating landscape options for corridor restoration between giant panda reserves.

Directory of Open Access Journals (Sweden)

Fang Wang

Full Text Available The establishment of corridors can offset the negative effects of habitat fragmentation by connecting isolated habitat patches. However, the practical value of corridor planning is minimal if corridor identification is not based on reliable quantitative information about species-environment relationships. An example of this need for quantitative information is planning for giant panda conservation. Although the species has been the focus of intense conservation efforts for decades, most corridor projects remain hypothetical due to the lack of reliable quantitative researches at an appropriate spatial scale. In this paper, we evaluated a framework for giant panda forest corridor planning. We linked our field survey data with satellite imagery, and conducted species occupancy modelling to examine the habitat use of giant panda within the potential corridor area. We then conducted least-cost and circuit models to identify potential paths of dispersal across the landscape, and compared the predicted cost under current conditions and alternative conservation management options considered during corridor planning. We found that due to giant panda's association with areas of low elevation and flat terrain, human infrastructures in the same area have resulted in corridor fragmentation. We then identified areas with high potential to function as movement corridors, and our analysis of alternative conservation scenarios showed that both forest/bamboo restoration and automobile tunnel construction would significantly improve the effectiveness of corridor, while residence relocation would not significantly improve corridor effectiveness in comparison with the current condition. The framework has general value in any conservation activities that anticipate improving habitat connectivity in human modified landscapes. Specifically, our study suggested that, in this landscape, automobile tunnels are the best means to remove current barriers to giant panda

Direct greenhouse gas emissions of the game industry in South Africa

African Journals Online (AJOL)

Direct greenhouse gas emissions of the game industry in South Africa. ... Previous greenhouse gas (GHG) inventories did not include game as an emissions source. Recently game farming has ... AJOL African Journals Online. HOW TO USE ...

20th-Century Industrial Black Carbon Emissions Altered Arctic Climate Forcing

OpenAIRE

McConnell, J. R; Edwards, R.; Kok, G. L; Flanner, M. G; Zender, C. S; Saltzman, E. S; Banta, J. R; Pasteris, D. R; Carter, M. M; Kahl, J. D. W

2007-01-01

Black carbon (BC) from biomass and fossil fuel combustion alters chemical and physical properties of the atmosphere and snow albedo, yet little is known about its emission or deposition histories. Measurements of BC, vanillic acid, and non–sea-salt sulfur in ice cores indicate that sources and concentrations of BC in Greenland precipitation varied greatly since 1788 as a result of boreal forest fires and industrial activities. Beginning about 1850, industrial emissions resulted in a sevenfold...

An experimental test of whether habitat corridors affect pollen transfer.

Energy Technology Data Exchange (ETDEWEB)

Townsend, Patricia A.; Levey, Douglas J.

2005-02-01

Abstract. Negative effects of habitat fragmentation are thought to be diminished when habitat patches are joined by a corridor. A key assumption is that corridors facilitate exchange rates of organisms between otherwise isolated patches. If the organisms are pollinators, corridors may be important for maintaining genetically viable populations of the plants that they pollinate. We tested the hypothesis that corridors increase the movement of insect pollinators into patches of habitat and thereby increase pollen transfer for two species of plants, one pollinated by butterflies (Lantana camara) and the other by bees and wasps (Rudbeckia hirta). We worked in an experimental landscape consisting of 40 greater than or equal to 1-ha patches of early-successional habitat in a matrix of forest. Within each of eight experimental units, two patches were connected by a corridor (150 X 25 m), and three were not. Patch shape varied to control for the area added by the presence of a corridor. Differences in patch shape also allowed us to test alternative hypotheses of how corridors might function. The Traditional Corridor Hypothesis posits that corridors increase immigration and emigration by functioning as movement conduits between patches. The Drift Fence Hypothesis posits that corridors function by ‘‘capturing’’ organisms dispersing through the matrix, redirecting them into associated habitat patches. Using fluorescent powder to track pollen, we found that pollen transfer by butterflies between patches connected by a corridor was significantly higher than between unconnected patches (all values mean plus or minus 1 SE: 59% plus or minus 9.2% vs. 25% plus or minus 5.2% of flowers receiving pollen). Likewise, pollen transfer by bees and wasps was significantly higher between connected patches than between unconnected patches (30% plus or minus 4.2% vs. 14.5% plus or minus 2.2%). These results support the Traditional Corridor Hypothesis. There was little support, however

Metro Conservation Corridors

Data.gov (United States)

Minnesota Department of Natural Resources — The Metro Conservation Corridors (MeCC) grow out of the natural resource analysis work done by the DNR in the late '90's, documented in the Metro Greenprint...

Quantitative assessment of industrial VOC emissions in China: Historical trend, spatial distribution, uncertainties, and projection

Science.gov (United States)

Zheng, Chenghang; Shen, Jiali; Zhang, Yongxin; Huang, Weiwei; Zhu, Xinbo; Wu, Xuecheng; Chen, Linghong; Gao, Xiang; Cen, Kefa

2017-02-01

The temporal trends of industrial volatile organic compound (VOC) emissions was comprehensively summarized for the 2011 to 2013 period, and the projections for 2020 to 2050 for China were set. The results demonstrate that industrial VOC emissions in China increased from 15.3 Tg in 2011 to 29.4 Tg in 2013 at an annual average growth rate of 38.3%. Guangdong (3.45 Tg), Shandong (2.85 Tg), and Jiangsu (2.62 Tg) were the three largest contributors collectively accounting for 30.4% of the national total emissions in 2013. The top three average industrial VOC emissions per square kilometer were Shanghai (247.2 ton/km2), Tianjin (62.8 ton/km2), and Beijing (38.4 ton/km2), which were 12-80 times of the average level in China. The data from the inventory indicate that the use of VOC-containing products, as well as the production and use of VOCs as raw materials, as well as for storage and transportation contributed 75.4%, 10.3%, 9.1%, and 5.2% of the total emissions, respectively. ArcGIS was used to display the remarkable spatial distribution variation by allocating the emission into 1 km × 1 km grid cells with a population as surrogate indexes. Combined with future economic development and population change, as well as implementation of policy and upgrade of control technologies, three scenarios (scenarios A, B, and C) were set to project industrial VOC emissions for the years 2020, 2030, and 2050, which present the industrial VOC emissions in different scenarios and the potential of reducing emissions. Finally, the result shows that the collaborative control policies considerably influenced industrial VOC emissions.

The actual relevance of ecological corridors in nature conservation

Directory of Open Access Journals (Sweden)

Ćurčić Nina B.

2013-01-01

Full Text Available The paper considers theoretical and applied foundations of the concept of the ecological corridors in nature conservation. Their relevance comes from recent ecological phenomenon of habitat fragmentation which is rapidly increasing during last decades. Habitat fragmentation is one of the main threats to richness and diversity of wildlife. Ecological corridors can mitigate the loss and fragmentation of habitat. Corridors perform as “bridges” between habitats for species and they provide a flow of the natural or even anthropogenic caused disturbances. In this paper we will present the meaning and significance of ecological corridors in nature conservation, as well as types of ecological corridors and their ecological benefits. Methodological and practical approaches in nature protection system in Serbia are included. [Projekat Ministarstva nauke Republike Srbije, br. 47007 i br. 176008

Potential energy savings and CO2 emissions reduction of China's cement industry

International Nuclear Information System (INIS)

Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

2012-01-01

This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

River Corridor Easements

Data.gov (United States)

Vermont Center for Geographic Information — A River Corridor Easement (RCE) is an area of conserved land adjacent to a river or stream that was conserved to permanently protect the lateral area the river needs...

Habitat corridor utilization by the gray mouse lemur, Microcebus ...

African Journals Online (AJOL)

For this, we trapped M. murinus in four forest fragments and mixed tree plantations between the fragments. One of the corridors was ... During four years of study, only one male M.murinus used the Melaleuca corridor, while several M. murinus were caught in the Eucalyptus and the Acacia corridor in 2013. The density of the ...

Implementation of Industrial Emissions Directive in Finland. Impacts assessment; Teollisuuspaeaestoedirektiivin toimeenpanon vaikutukset Suomessa

Energy Technology Data Exchange (ETDEWEB)

Attila, M.; Groenroos, J.; Jantunen, J.

2012-08-15

The report deals with environmental, administrative and social effects of the Industrial Emissions Directive (Iced) implementation in Finland. The scope of industrial activities under the IED was determined and compared with the IPPC-directive and existing national environmental legislation. The sectors specifically looked into were large combustion plants, pulp and paper industry, iron and steel industry, as well as intensive rearing of pigs and poultry. Particularly the application of best available techniques (BAT), emissions and environmental impacts within these sectors in Finland were evaluated. The study included interviews of permit and enforcement authorities about their views of the effects on authority tasks, human resource needs and other aspects including administrative procedures. Interviews and questionnaire surveys were also made for industry representatives. Moreover, impacts on emergence and dissemination of innovations were assessed. According to the IED the environmental permit conditions including the emission limit values are to be based on the BAT conclusions, which are reviewed approximately every 10 years. Public consultation of permit applications, permit decisions and supervision documents through electronic media is strengthened which improves means for participation of citizens in the environmental permit process and enforcement activities. The implementation of the IED brings about significant emission reductions in large combustion plants over the next decade and thereafter. To some extent also emissions from pulp and paper industry as well as metal industry in Finland will be reduced. On European level the IED will produce positive effects through reduced transboundary air pollution. The implementation of the IED requires significant investments in large combustion plants, in particular, but also in many processing industry installations. More human resources also need to be allocated to permit and enforcement authority functions for

77 FR 3326 - Northeast Corridor Safety Committee; Notice of Meeting

Science.gov (United States)

2012-01-23

.... 3] Northeast Corridor Safety Committee; Notice of Meeting AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Announcement of Northeast Corridor Safety Committee Meeting. SUMMARY: FRA announced the first meeting of the Northeast Corridor Safety Committee, a Federal...

76 FR 32391 - Northeast Corridor Safety Committee; Notice of Meeting

Science.gov (United States)

2011-06-06

.... 1] Northeast Corridor Safety Committee; Notice of Meeting AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Announcement of the Northeast Corridor Safety Committee Meeting. SUMMARY: FRA announces the first meeting of the Northeast Corridor Safety Committee, a...

Meteorological and sulphur dioxide dispersion modelling for an industrial complex near Mexico city metropolitan area

International Nuclear Information System (INIS)

Mora, V.R.; Sosa, G.; Molina, M.M.; Palmerin-ruiz, M.E.; Melgarejo-flores, L.E.

2009-01-01

Major sulphur dioxide emissions in Mexico are due largely to fuel of oil refining and coal combustion. In Tula-Vito-Apasco industrial corridor (TVA) are located two important sources of SO/sub 2/: the 'Miguel Hidalgo' refinery and the 'Francisco Perez Rios' power plant. Due to from March 25 to April 22 of 2006 a major field campaign took place as part of a collaborative research program called MILAGRO. Data collected around the Industrial Complex were used to: a) evaluate the air quality to local and regional scale; b) study the structure of the atmospheric boundary layer (BL); and c) validate meteorological and dispersion models. In this study we presented the behaviour of daytime BL, and the results of meteorological and dispersion modelling for selected episodes of high sulfur dioxide (SO/sub 2/). The Regional Atmospheric Modeling System (RAMS) and the Hybrid and Particle Concentration Transport Model (HYPACT) were used to evaluate the impact of SO/sub 2/ emissions to regional scale. For modelling, we selected the days where higher mean daily levels of SO/sub 2 /surface concentrations were observed, these corresponded to March 31 and April 6. The results indicate that: The daytime BL in TVA, exhibited a normal behavior, a stable layer or thermal inversion close to surface was observed at 0800 LST (up to 80% of the cases), then the mixing height (MH) growths, with a growth rate of 313 m h-1 (between 0800 to 1200 LST). The most rapid MH growth happened between 1200 to 1500 LST;. The maximum MH was observed at 1500 LST (90% of the cases); the mean maximum MH was close to 2794 m AGL; Potential temperature and humidity profiles showed a normal behavior; High persistence in wind direction (> 0.6) close to surface up to 500 m AGL, was observed at 1500, and 1800 LST, at the same time, a low level jet, penetrating from the NE, with wind speed between 6 to 8 m s/sup -1/ was observed. Meteorological modelling was used to determine the circulation patterns in the region

77 FR 20690 - Northeast Corridor Safety Committee; Notice of Meeting

Science.gov (United States)

2012-04-05

.... 4] Northeast Corridor Safety Committee; Notice of Meeting AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Announcement of the Northeast Corridor Safety... NECSC is made up of stakeholders operating on the Northeast Corridor (NEC), and the purpose of the...

Analysis of Potential Energy Corridors Proposed by the Western Electricity Coordinating Council

Energy Technology Data Exchange (ETDEWEB)

Kuiper, James A.; Cantwell, Brian J.; Hlava, Kevin J.; Moore, H Robert; Orr, Andrew B.; Zvolanek, Emily A.

2014-02-24

This report, Analysis of Potential Energy Corridors Proposed by the Western Electricity Coordinating Council (WECC), was prepared by the Environmental Science Division of Argonne National Laboratory (Argonne). The intent of WECC’s work was to identify planning-level energy corridors that the Department of Energy (DOE) and its affiliates could study in greater detail. Argonne was tasked by DOE to analyze the WECC Proposed Energy Corridors in five topic areas for use in reviewing and revising existing corridors, as well as designating additional energy corridors in the 11 western states. In compliance with Section 368 of the Energy Policy Act of 2005 (EPAct), the Secretaries of Energy, Agriculture, and the Interior (Secretaries) published a Programmatic Environmental Impact Statement in 2008 to address the proposed designation of energy transport corridors on federal lands in the 11 western states. Subsequently, Records of Decision designating the corridors were issued in 2009 by the Bureau of Land Management (BLM) and the U.S. Forest Service (USFS). The 2012 settlement of a lawsuit, brought by The Wilderness Society and others against the United States, which identified environmental concerns for many of the corridors requires, among other things, periodic reviews of the corridors to assess the need for revisions, deletions, or additions. A 2013 Presidential Memorandum requires the Secretaries to undertake a continuing effort to identify and designate energy corridors. The WECC Proposed Energy Corridors and their analyses in this report provide key information for reviewing and revising existing corridors, as well as designating additional energy corridors in the 11 western states. Load centers and generation hubs identified in the WECC analysis, particularly as they reflect renewable energy development, would be useful in reviewing and potentially updating the designated Section 368 corridor network. Argonne used Geographic Information System (GIS) technology to

On the determinants of industrial competitiveness: The European Union emission trading scheme and the Italian paper industry

International Nuclear Information System (INIS)

Meleo, Linda

2014-01-01

The European Union Emission Trading Scheme (EU-ETS) represents the masterpiece that the EU adopted to achieve the Kyoto Protocol and “Europe 2020” strategy goals of reducing greenhouse gas (GHG). Although the EU-ETS is designed “in order to promote reductions of greenhouse gas emissions in a cost-effective and economically efficient manner” and “without prejudice for the Treaty”, the system has become a concern issue for firms and industries over competitiveness in European and international markets in addition to carbon leakage. This paper analyses whether and to what extent the EU-ETS may harm competitiveness, by following a qualitative approach, and presenting the case of the Italian paper industry, included in the system as an energy-intensive sector. More specifically, first the paper identifies those key factors that provide a qualitative measure of the “competitiveness risk” related to the EU-ETS; then, those factors are used to examine the Italian paper industry and to assess the actual and potential risks affecting the sector. This analysis is of interest given the lack of similar studies on the Italian paper industry and represents a starting point to serve further studies and future policymaking in Italy and Europe. - Highlights: • The European Emission Trading Scheme (EU-ETS) and the effects on the Italian paper industry competitiveness. • Key factors that provide a measure of the “competitiveness risk” for the Italian paper industry. • Those risks are limited at the moment, but some factors need to be carefully managed, such as electricity uses and prices. • Industrial policies and new firms strategies are required to manage the “competitiveness risk” in the coming years

Industrial energy efficiency with CO2 emissions in China: A nonparametric analysis

International Nuclear Information System (INIS)

Wu, F.; Fan, L.W.; Zhou, P.; Zhou, D.Q.

2012-01-01

Global awareness on energy security and climate change has created much interest in assessing economy-wide energy efficiency performance. A number of previous studies have contributed to evaluate energy efficiency performance using different analytical techniques among which data envelopment analysis (DEA) has recently received increasing attention. Most of DEA-related energy efficiency studies do not consider undesirable outputs such as CO 2 emissions in their modeling framework, which may lead to biased energy efficiency values. Within a joint production framework of desirable and undesirable outputs, in this paper we construct both static and dynamic energy efficiency performance indexes for measuring industrial energy efficiency performance by using several environmental DEA models with CO 2 emissions. The dynamic energy efficiency performance indexes have further been decomposed into two contributing components. We finally apply the indexes proposed to assess the industrial energy efficiency performance of different provinces in China over time. Our empirical study shows that the energy efficiency improvement in China's industrial sector was mainly driven by technological improvement. - Highlights: ► China's industrial energy efficiency is evaluated by DEA models with CO 2 emissions. ► China's industrial energy efficiency improved by 5.6% annually since 1997. ► Industrial energy efficiency improvement in China was mainly driven by technological improvement.

Integrated risk management of safety and development on transportation corridors

International Nuclear Information System (INIS)

Thekdi, Shital A.; Lambert, James H.

2015-01-01

Prioritization of investments to protect safety and performance of multi-regional transportation networks from adjacent land development is a key concern for infrastructure agencies, land developers, and other stakeholders. Despite ample literature describing relationships between transportation and land use, no evidence-based methods exist for monitoring corridor needs on a large scale. Risk analysis is essential to the preservation of system safety and capacity, including avoidance of costly retrofits, regret, and belated action. This paper introduces the Corridor Trace Analysis (CTA) for prioritizing corridor segments that are vulnerable to adjacent land development. The method integrates several components: (i) estimation of likelihood of adjacent land development, using influence diagram and rule-based modeling, (ii) characterization of access point density using geospatial methods, and (iii) plural-model evaluation of corridors, monitoring indices of land development likelihood, access point densities, and traffic volumes. The results inform deployment of options that include closing access points, restricting development, and negotiation of agencies and developers. The CTA method is demonstrated on a region encompassing 6000 centerline miles (about 10,000 km) of transportation corridors. The method will be of interest to managers investing in safety and performance of infrastructure systems, balancing safety, financial, and other criteria of concern for diverse stakeholders. - Highlights: • The Corridor Trace Analysis (CTA) method for prioritizing transportation corridors. • The CTA method studies corridors vulnerable to adjacent land development. • The CTA method quantifies the influence of risk scenarios on agency priorities. • The CTA method is demonstrated on 6000 miles of critical transportation corridor

Long term energy and materials strategies for reduction of industrial CO2 emissions. A case study for the iron and steel industry

International Nuclear Information System (INIS)

Gielen, D.J.

1997-01-01

Greenhouse gas emissions emerged in the last decade as a key environmental problem on the political agenda. The most important greenhouse gas is carbon dioxide (CO 2 ). This gas results from the combustion of fossil fuels (natural gas, oil and coal). As a consequence, greenhouse gas emission reduction is closely related to energy policies. Even a stabilization of the atmospheric CO 2 concentrations at a level of 750 ppm (parts per million), more than twice the current level, implies a reduction of global emissions by 50% in the next century. The world population will simultaneously double and the capita energy consumption will increase. As a consequence, the Western industrialized countries will have to reduce their per capita emissions by more than a factor four. Such a policy goal will significantly affect the future industrial production structure. Approximately 4% of the global CO 2 emissions can be attributed to the production of iron and steel. This sector is the most important industrial source of CO 2 . The case study for the iron and steel industry will be discussed in this paper in order to illustrate the impact of significant CO 2 emission mitigation on the industry. The goal is to show the consequences of CO 2 policies for R and D planning and investment decisions. The notion that the iron and steel industry will be affected by CO 2 policies is not new; a number of studies have addressed this issue before. These studies have compared steel production technologies and emission reduction options within the iron and steel production sector. In this paper, the emission reduction in the iron and steel industry is analyzed within the framework of the changing (inter-)national energy and materials system configuration. This includes all production, conversion and consumption processes. The impact of CO 2 policies on the optimal choice of steel production technologies and on the competitiveness of steel compared to other materials will be discussed. This paper

Management of industrial sulfur dioxide and nitrogen oxides emissions in Alberta - description of the existing system

International Nuclear Information System (INIS)

Macdonald, W.S.; Bietz, B.F.

1999-01-01

In addition to being key primary air contaminants, sulfur dioxide and nitrogen oxides are also major contributors to acidic deposition. The current management system for controlling industrial sources of SO(2) and NO(x) emissions in Alberta was developed in the late 1960s/early 1970s. The focus is on control of point source emissions through the use of appropriate technology. The approach taken for managing SO(2) and NO(x) emissions is similar to the approach taken to other industrial air and wastewater pollutants in Alberta. It is a command and control regulatory system. There are three main industry categories in Alberta which emit SO(2): sour gas processing, oil sand plants and thermal power plants. For NO(x) emissions, the two main categories with emissions: are natural gas production and thermal power plants. The two main goals of the existing industrial air quality management systems are to ensire that: (1) emissions from industrial facilities are minimized through the use of best available demonstrated technology, and (2) ambient levels of air contaminants in the vicinity of industrial facilities do not exceed Alberta guidelines. The four main policies which support these two goals of the existing management system are described. There are a number of key components of the existing management system including: ambient guideline levels, source emission standards, plume dispersion modelling, ambient air and source emission monitoring, environmental reporting, emission inventories, and approvals. 32 refs., 13 figs

Limits to benthic feeding by eiders in a vital Arctic migration corridor due to localized prey and changing sea ice

Science.gov (United States)

Lovvorn, James R.; Rocha, Aariel R.; Jewett, Stephen C.; Dasher, Douglas; Oppel, Steffen; Powell, Abby

2015-01-01

Four species of threatened or declining eider ducks that nest in the Arctic migrate through the northeast Chukchi Sea, where anticipated industrial development may require prioritizing areas for conservation. In this nearshore corridor (10–40 m depth), the eiders’ access to benthic prey during the spring is restricted to variable areas of open water within sea ice. For the most abundant species, the king eider (Somateria spectabilis), stable isotopes in blood cells, muscle, and potential prey indicate that these eiders ate mainly bivalves when traversing this corridor. Bivalves there were much smaller than the same taxa in deeper areas of the northern Bering Sea, possibly due to higher mortality rates caused by ice scour in shallow water; future decrease in seasonal duration of fast ice may increase this effect. Computer simulations suggested that if these eiders forage for >15 h/day, they can feed profitably at bivalve densities >200 m−2 regardless of water depth or availability of ice for resting. Sampling in 2010–2012 showed that large areas of profitable prey densities occurred only in certain locations throughout the migration corridor. Satellite data in April–May over 13 years (2001–2013) indicated that access to major feeding areas through sea ice in different segments of the corridor can vary from 0% to 100% between months and years. In a warming and increasingly variable climate, unpredictability of access may be enhanced by greater effects of shifting winds on unconsolidated ice. Our results indicate the importance of having a range of potential feeding areas throughout the migration corridor to ensure prey availability in all years. Spatial planning of nearshore industrial development in the Arctic, including commercial shipping, pipeline construction, and the risk of released oil, should consider these effects of high environmental variability on the adequacy of habitats targeted for conservation.

Reduction of Multi-pollutant Emissions from Industrial Sectors: The U.S. Cement Industry – A Case Study

Science.gov (United States)

For Frank Princiotta’s book, Global Climate Change—The Technology Challenge Carbon dioxide (CO2) accounts for more than 90% of worldwide CO2-eq green-house gas (GHG) emissions from industrial sectors other than power generation. Amongst these sectors, the cement industry is one ...

Integrated corridor management : implementation guide and lessons learned.

Science.gov (United States)

2012-02-01

This implementation guide is intended for use by adopters of integrated corridor management (ICM) approaches and strategies to address congestion and travel time reliability issues within specific travel corridors. It introduces the topic of ICM and ...

Charges on emissions of nitrogen oxides from forest industry boilers. Technical and economic effects

International Nuclear Information System (INIS)

Liebscher, P.

1998-09-01

The charges on nitrogen oxide emission have been introduced in order to create an incentive for the industry to reduce emissions. A high cost in unproductive investment for monitoring systems, SNCR and gas recirculation systems was paid. However, the economic burden for the industry was less than initially feared, since the NO x emissions were moderate for most of the boilers, and since the potential for reducing NO x by rather simple means could be exploited. Also, the NO x charges have created an objective for industry to optimize their boilers in a way that raises efficiency and availability, which is of greater value to the environment than the reduction of the already low NO x emissions from these boilers

Impact of improved technology on industrial greenhouse-gas emissions in developing countries. Phase 1

International Nuclear Information System (INIS)

1997-06-01

In response to a formal request by the Group of 77 and China, the United Nations Industrial Development Organization (UNIDO) initiated a study to identify opportunities to reduce the emissions of greenhouse gases from energy-intensive industries in developing countries. These sectors currently include iron and steel, petroleum refining, cement, paper and pulp and nitrogen fertilizers. The aim of this first phase was to describe: how energy is used in the energy-intensive industries in developing countries today; what current trends indicate for the future; the potential contribution of improved technologies and practices to moving toward more sustainable industrial production in developing countries, and to provide developing countries with an analytical tool for evaluating opportunities to limit industrial greenhouse-gas (GHG) emissions in their industrial sectors through the transfer of improved technologies and processes. The immediate objectives of Phase 1 were twofold: to provide information to developing countries in the form of an inventory of energy-efficient, best-available technologies and processes that can be used to abate greenhouse-gas emissions in the most energy-intensive industrial sub-sectors as well as cross-cutting measures applicable in a range of sub-sectors, and; to provide an analytical methodology in the form of a software tool that enables the user to evaluate and compare the costs, energy requirements, and greenhouse-gas emissions associated with scenarios of specific technology and process options. To meet these objectives, the first phase of the study comprised: a Report entitled Industrial Greenhouse-gas Emissions from Developing Countries; a Software Package containing, an Industrial Technology Inventory, and an Analysis Tool, and; Industry/country-specific Case Studies. The Report describes current energy use and greenhouse-gas emissions in energy-intensive industries in developing countries, and similar industries exemplifying good

Greenhouse gas emissions from production chain of a cigarette manufacturing industry in Pakistan.

Science.gov (United States)

Hussain, Majid; Zaidi, Syed Mujtaba Hasnian; Malik, Riffat Naseem; Sharma, Benktesh Dash

2014-10-01

This study quantified greenhouse gas (GHG) emissions from the Pakistan Tobacco Company (PTC) production using a life cycle approach. The PTC production chain comprises of two phases: agricultural activities (Phase I) and industrial activities (Phase II). Data related to agricultural and industrial activities of PTC production chain were collected through questionnaire survey from tobacco growers and records from PTC manufacturing units. The results showed that total GHG emissions from PTC production chain were 44,965, 42,875, and 43,839 tCO2e respectively in 2009, 2010, and 2011. Among the agricultural activities, firewood burning for tobacco curing accounted for about 3117, 3565, and 3264 tCO2e, fertilizer application accounted for 754, 3251, and 4761 tCO2e in 2009, 2010, and 2011, respectively. Among the industrial activities, fossil fuels consumption in stationary sources accounted for 15,582, 12,733, and 13,203 tCO2e, fossil fuels used in mobile sources contributed to 2693, 3038, and 3260 tCO2e, and purchased electricity consumed resulted in 15,177, 13,556, and 11,380 tCO2e in 2009, 2010, and 2011, respectively. The GHG emissions related to the transportation of raw materials and processed tobacco amounted to 6800, 6301, and 7317 respectively in 2009, 2010, and 2011. GHG emissions from energy use in the industrial activities constituted the largest emissions (i.e., over 80%) of GHG emissions as PTC relies on fossil fuels and fossil fuel based electrical power in industrial processes. The total emissions of carbon footprint (CFP) from PTC production were 0.647 tCO2e per million cigarettes produced in 2009, 0.675 tCO2e per million cigarettes in 2010 and 0.59 tCO2e per million cigarettes in 2011. Potential strategies for GHG emissions reductions for PTC production chain include energy efficiency, reducing reliance on fossil fuels in non-mobile sources, adoption of renewable fuels including solar energy, energy from crop residues, and promotion of organic

Poisoning of bees by industrial arsenic emissions

Energy Technology Data Exchange (ETDEWEB)

Jaroslav, S

1962-01-01

Massive poisoning of bees by industrial arsenic emissions in Czechoslovakia are reviewed. Arsenic emissions from an ore processing plant in Tesin were responsible for massive bee deaths after World War I. Massive death of bees was observed in 1938 in the Krompach region around a copper ore smelting plant which emitted arsenic. Other accidents were reported in 1954 and 1957 in areas around industrial plants and power plants using arsenopyrite-containing low-grade coal or lignite. Arsenic was emitted bound in fly-ash in the form of arsenic trioxide or, in the case of coals containing alkaline chlorides, in the form of arsenic trichloride. The arsenic contamination extended to areas within a radius of 3 to 7 km. Settled fly-ash contained 0.0004 to 0.75 percent arsenic, which was soluble in a citrate-hydrochloric acid solution of pH 3.9, which corresponds to the gastric acid of bees. The arsenic uptake by the bees from pollen was calculated to amount to 1 microgram daily, against a toxic dose of 0.37 microgram. The toxic effect of arsenic on bees can be abated by adding colloidal iron hydroxide to the sugar solution which they are fed.

Poisoning of bees by industrial arsenic emissions

Energy Technology Data Exchange (ETDEWEB)

Svoboda, J

1962-01-01

Massive poisoning of bees by industrial arsenic emissions in Czechoslovakia are reviewed. Arsenic emissions from an ore processing plant in Tesin were responsible for massive bee deaths after World War I. Massive death of bees was observed in 1938 in the Krompach region around a copper ore smelting plant which emitted arsenic. Other accidents were reported in 1954 and 1957 in areas around industrial plants and power plants using arsenopyrite-containing low-grade coal or lignite. Arsenic was emitted bound in fly-ash in the form of arsenic trioxide or, in the case of coals containing alkaline chlorides, in the form of arsenic trichloride. The arsenic contamination extended to areas within a radius of 3-7 km. Settled fly-ash contained 0.0004-0.75% arsenic, which was soluble in a citrate-hydrochloric acid solution of pH 3.9, which corresponds to the gastric acid of bees. The arsenic uptake by the bees from pollen was calculated to amount to 1 microgram daily, against a toxic dose of 0.37 microgram. The toxic effect of arsenic on bees can be abated by adding colloidal iron hydroxide to the sugar solution which they are fed. 5 references.

A Narrative about a “Resurrected Woman” in the Reception of D.V. Batov, an Old Believer of Tula

Directory of Open Access Journals (Sweden)

Alexander V. Pigin

2017-12-01

Full Text Available The article deals with one of the genres of Russian folklore, the so-called obmiraniye narratives about a human soul visiting the other world during the lethargy state. It dis- cusses the problem of perception of such texts on the example of the following case study. At the turn of the century, a famous Tula-based Old Believer and publisher D.V. Batov (1825–1910 wrote a short article “On the Reading of Brochure Phrases” (reprinted as “On the Reading of Fictitious Brochures”. In this article, he strongly criticized the nar- rative about a “resurrected woman” recorded by Archimandrite Macarius (Glukharyov of Altai in the early 1830s. In this narrative, a local Cossack’s wife sank into lethargy and was ascended to heaven where she met the Lord who heard the prayers for her and let her go back but instead ordered to bring him the soul of a different woman bearing the same name. D.V. Batov interpreted this obmiraniye narrative as sheer fiction circulated by the dominant church, alongside other fictitious stories, and causing damage to the faith. The article examines other D.V. Batov’s arguments against this text: the main one is dis- crepancy between the narrative and the Orthodox doctrine of the soul’s afterlife ordeals as represented in the Byzantine Life of Vassily Novy (10 th century. The Old Believer of Tula reads a text belonging to folk culture through the lenses of church literature and bookish topoi. Thus, the process of text verification by the bearer of religious conscious- ness consists in its juxtaposing with the tradition that the recipient sees as the only true one. The article also analyzes the actual obmiraniye narrative recorded by Archimandrite Macarius and finds its parallels in oral and written texts of the visionary genre.

PM 10 emission inventory of industrial and road transport vehicles in ...

African Journals Online (AJOL)

Rapid development in industrial and road transportation sector in developing countries has contributing the environmental issue. Determining the estimated PM10 emission in Klang Valley, Malaysia is based on the best available resources. Emission of PM10 from both sources was estimated particularly from numbers of ...

Fugitive emission inventory from Brazilian oil and gas industry (2000-2005) and discussion of mitigation measures

Energy Technology Data Exchange (ETDEWEB)

Carloni, Flavia A.; D' Avignon, Alexandre; La Rovere, Emilio L. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Centro Clima

2008-07-01

The objective of this work is to evaluate current emissions of GHGs within the Brazilian oil and gas industry, specifically the fugitive emissions arising from exploration and production. Besides, projects for mitigating these emissions and opportunities for the national industry are investigated. Results show that N{sub 2}O contributes little to fugitive emissions from the oil and gas industry, principally from gas sector. NMVOC emissions are significant, principally from the oil sector. In relation to CO{sub 2} and CH{sub 4} emissions, the oil sector emits more CO{sub 2} while the gas sector contributes more to CH{sub 4} emissions. In both sectors flaring is the activity that emits most CO{sub 2}. In relation to CH{sub 4} the principal contribution to emissions are from exploration and production onshore, although offshore activities as a whole play a greater part in the national industry. The results make it clear that the use of gas from flaring activity is a great opportunity for emission mitigation projects. From a business point of view, methane emissions could mean lost opportunities in selling natural gas. The Kyoto Protocol mechanisms, as the Clean Development Mechanism and Joint Implementation actions, provide the opportunity to stimulate investments in projects for reducing flaring and venting of associated gas. (author)

HANFORD SITE RIVER CORRIDOR CLEANUP

International Nuclear Information System (INIS)

BAZZELL, K.D.

2006-01-01

In 2005, the US Department of Energy (DOE) launched the third generation of closure contracts, including the River Corridor Closure (RCC) Contract at Hanford. Over the past decade, significant progress has been made on cleaning up the river shore that bordes Hanford. However, the most important cleanup challenges lie ahead. In March 2005, DOE awarded the Hanford River Corridor Closure Contract to Washington Closure Hanford (WCH), a limited liability company owned by Washington Group International, Bechtel National and CH2M HILL. It is a single-purpose company whose goal is to safely and efficiently accelerate cleanup in the 544 km 2 Hanford river corridor and reduce or eliminate future obligations to DOE for maintaining long-term stewardship over the site. The RCC Contract is a cost-plus-incentive-fee closure contract, which incentivizes the contractor to reduce cost and accelerate the schedule. At $1.9 billion and seven years, WCH has accelerated cleaning up Hanford's river corridor significantly compared to the $3.2 billion and 10 years originally estimated by the US Army Corps of Engineers. Predictable funding is one of the key features of the new contract, with funding set by contract at $183 million in fiscal year (FY) 2006 and peaking at $387 million in FY2012. Another feature of the contract allows for Washington Closure to perform up to 40% of the value of the contract and subcontract the balance. One of the major challenges in the next few years will be to identify and qualify sufficient subcontractors to meet the goal

A disaggregated analysis of the environmental Kuznets curve for industrial CO_2 emissions in China

International Nuclear Information System (INIS)

Wang, Yuan; Zhang, Chen; Lu, Aitong; Li, Li; He, Yanmin; ToJo, Junji; Zhu, Xiaodong

2017-01-01

Highlights: • The existence of EKC hypothesis for industrial carbon emissions is tested for China. • A semi-parametric panel regression is used along with the STIRPAT model. • The validity of the EKC hypothesis varies across industry sectors. • The EKC relation to income exists in the electricity and heat production sector. • The EKC relation to urbanization exists in the manufacturing sector. - Abstract: The present study concentrates on a Chinese context and attempts to explicitly examine the impacts of economic growth and urbanization on various industrial carbon emissions through investigation of the existence of an environmental Kuznets curve. Within the Stochastic Impacts by Regression on Population, Affluence and Technology framework, this is the first attempt to simultaneously explore the income/urbanization and disaggregated industrial carbon dioxide emissions nexus, using panel data together with semi-parametric panel fixed effects regression. Our dataset is referred to a provincial panel of China spanning the period 2000–2013. With this information, we find evidence in support of an inverted U-shaped curve relationship between economic growth and carbon dioxide emissions in the electricity and heat production sector, but a similar inference only for urbanization and those emissions in the manufacturing sector. The heterogeneity in the EKC relationship across industry sectors implies that there is urgent need to design more specific policies related to carbon emissions reduction for various industry sectors. Also, these findings contribute to advancing the emerging literature on the development-pollution nexus.

The impact of international trade on China's industrial carbon emissions since its entry into WTO

International Nuclear Information System (INIS)

Ren, Shenggang; Yuan, Baolong; Ma, Xie; Chen, Xiaohong

2014-01-01

This paper employs the input–output (IO) approach to analyze the scale and structure of embodied carbon emissions of China's 19 industry sectors during 2001–2011 and constructs a regression model to establish the relationship between energy intensity, per capita output, trade openness, foreign direct investment (FDI), trade comparative advantage, environmental regulation, technology, and CO 2 emission intensity. Our results suggest that: China's international embodied carbon emission balance has been in a state of continuous growth for the period 2001–2011, and China has become a pollution haven; the relationship between per capita output and CO 2 emission is inverse N-typed and China's industries are in the rising stage of the curve; FDI and trade comparative advantage are two main elements boosting China's carbon emissions; trade openness, environmental regulation, and technology will lower the growth rate of China's industrial carbon emissions (ICEs). Consequently, China's policies should center on adjusting the industry structure and scale of FDI inflows, transforming industries with trade comparative advantages into a clean type, facilitating environmental regulation level, and bringing in and developing low-carbon technology to avert China from being a pollution haven. - Highlights: • We first employ a panel dataset of 19 industry sectors in China. • The relationship between per capita output and CO 2 emission is inverse N-typed. • China’s industries are in the rising stage of the inverse N-typed curve. • FDI and trade comparative advantage increase industrial carbon emissions in China

METHANE EMISSIONS FROM THE NATURAL GAS INDUSTRY VOLUME 1: EXECUTIVE SUMMARY

Science.gov (United States)

The 15-volume report summarizes the results of a comprehensive program to quantify methane (CH4) emissions from the U.S. natural gas industry for the base year. The objective was to determine CH4 emissions from the wellhead and ending downstream at the customer's meter. The accur...

Energy Futures Synthesis for West-Wide Section 368 Energy Corridors

Energy Technology Data Exchange (ETDEWEB)

O' Neill, Barbara L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Gagne, Douglas A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cook, Jeffrey J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Greco, Tessa M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-05-01

To comply with Section 368(a) of the Energy Policy Act of 2005 (EPAct), the U.S. Bureau of Land Management (BLM) and the U.S. Forest Service designated 6,000 miles of energy corridors on public and national forest lands in the western United States in 2009. The corridors, commonly referred to as 'West-wide' or 'Section 368' energy corridors, are intended as preferred locations for future siting of electric transmission and distribution lines and for oil, gas, and hydrogen pipelines. In response to a lawsuit filed by several organizations over the corridor designations, the BLM, Forest Service, and the U.S. Department of Energy entered into a Settlement Agreement, directing the formation of the Section 368 Interagency Workgroup to periodically review the energy corridors on a regional basis. In conducting the reviews, the Workgroup identifies new, relevant, existing, publicly available information to make recommendations for revisions, deletions, and additions to the Section 368 energy corridors. This report synthesizes information in available contemporary transmission, pipeline, and energy future studies to inform the regional reviews by providing a snapshot of what the western energy and transmission system will look like generally 10-15 years in the future. After an overview of the western grid implications, the analysis narrows to Region 2 and Region 3 of the BLM Section 368 energy corridors and focuses on the implications of potential developments in the oil, natural gas, and electricity markets in Colorado, New Mexico, Utah, and portions of Arizona and Nevada that could inform the current regional review. This analysis will help inform the Workgroup on potential development within existing corridors and the need for new corridors that have not yet been designated.

KPI Building Blocks For Successful Green Transport Corridor Implementation

Directory of Open Access Journals (Sweden)

Prause Gunnar

2015-12-01

Full Text Available The green transport corridor concept represents a cornerstone in the development of integrated and sustainable transport solutions. Important properties of green corridors are their transnational character and their high involvement of large numbers of public and private stakeholders, including political level, requiring sophisticated approaches for implementation, management and governance. The current scientific discussion focusses on Key Performance Indicators (KPI for monitoring and management of green transport corridor performance emphasizing the operational aspects.

Exergy analysis on industrial boiler energy conservation and emission evaluation applications

Science.gov (United States)

Li, Henan

2017-06-01

Industrial boiler is one of the most energy-consuming equipments in china, the annual consumption of energy accounts for about one-third of the national energy consumption. Industrial boilers in service at present have several severe problems such as small capacity, low efficiency, high energy consumption and causing severe pollution on environment. In recent years, our country in the big scope, long time serious fog weather, with coal-fired industrial boilers is closely related to the regional characteristics of high strength and low emissions [1]. The energy-efficient and emission-reducing of industry boiler is of great significance to improve China’s energy usage efficiency and environmental protection. Difference in thermal equilibrium theory is widely used in boiler design, exergy analysis method is established on the basis of the first law and second law of thermodynamics, by studying the cycle of the effect of energy conversion and utilization, to analyze its influencing factors, to reveal the exergy loss of location, distribution and size, find out the weak links, and a method of mining system of the boiler energy saving potential. Exergy analysis method is used for layer combustion boiler efficiency and pollutant emission characteristics analysis and evaluation, and can more objectively and accurately the energy conserving potential of the mining system of the boiler, find out the weak link of energy consumption, and improve equipment performance to improve the industrial boiler environmental friendliness.

Modelling of energy / technology actions and measures for reducing greenhouse gas emissions in the industrial sector (the industry challenge)

International Nuclear Information System (INIS)

Nyboer, J.; Bailie, A.J.; Sadownik, B.

2001-01-01

The potential in Canadian industry for the reduction of greenhouse gas emissions is assessed in this report. The analysis is aimed at providing a comprehensive and integrated evaluation of a wide spectrum of technology and energy actions available to the industrial sector in Canada, providing estimates of greenhouse gas emissions reductions, costs and cost effectiveness for different actions by 2010, and simulating industry response to defined measures approved by representatives of the industry sector sub-table. The impacts of a set of measures was determined using in-house models. Four measures were tested against several actions including primary fossil and electricity consumption, using regionally specific energy prices, a discount rate approximating 40 per cent and growth rates derived from the Analysis and Modelling Group. Enhancement of voluntary initiatives, enhanced cogeneration, financial incentives for capital investment to improve efficiency and carbon dioxide emissions reduction, and a set of cost-of-carbon-dioxide simulations were the measures tested. Total energy consumption and carbon dioxide emissions by sector and in aggregate are provided as well as the costs. An indication of the total cost of reduction per tonne, some sense of the cost of the permit and the quantity of a subsidy required to induce decision-makers to purchase the more efficient technology are also provided. 9 refs., tabs

Environmental indexes for the aggregation of emissions of industrial sectors; Milieu-indexen voor het aggregeren van emissies van bedrijfstakken

Energy Technology Data Exchange (ETDEWEB)

Smeets, E.; Weterings, R. [TNO Studiecentrum voor Technologie en Beleid, Delft (Netherlands); Klein, A.; Pulles, M.P.J. [TNO Milieuwetenschappen, Delft (Netherlands)

1995-01-01

The Dutch Emission Registration is an integral information system which contains data on the emissions of circa 900 materials of more than 700 businesses in the Netherlands. In this report attention is paid to how data from the Emission Registration can be presented such that specific groups of businesses and industrial sectors can be stimulated to reduce their emissions. Thereto, an index has been developed which gives an indication of the environmental load (emission in the year of registration) and the environmental performance (trends in emissions during a number of years) of groups of businesses and industrial sectors. Based on the results of a literature study six possible environmental indexes were investigated and compared for two randomly chosen groups of businesses (building materials, ceramics and glass industry and metal products industry) and two randomly chosen industrial sectors (fertilizer industry, and medicine and bandages industry). The indexes were calculated for the years 1988, 1990 and 1992. The index, which is based on a unweighted aggregation of emissions of a business group or industrial class, divided by the national emission and corrected for the number of laborers, appeared to be the most favorable. 9 refs.

CO_2 emission trends of China's primary aluminum industry: A scenario analysis using system dynamics model

International Nuclear Information System (INIS)

Li, Qiang; Zhang, Wenjuan; Li, Huiquan; He, Peng

2017-01-01

China announced its promise on CO_2 emission peak. When and what level of CO_2 emission peak China's primary aluminum industry will reach is in suspense. In this paper, a system dynamic model is established, with five subsystems of economy development, primary aluminum production, secondary aluminum production, CO_2 emission intensity and policies making involved. The model is applied to examine potential CO_2 emission trends of China's primary aluminum industry in next fifteen years with three scenarios of “no new policies”, “13th five-year plan” and “additional policies”. Simulation results imply that: merely relying on rapid expansion of domestic scarps recycling and reuse could not mitigate CO_2 emission continuously. Combination of energy-saving technology application and electrolytic technology innovation, as well as promoting hydropower utilization in primary aluminum industry are necessary for long term low-carbon development. From a global prospective, enhancing international cooperation on new primary aluminum capacity construction in other countries, especially with rich low-carbon energy, could bring about essential CO_2 emission for both China's and global primary aluminum industry. - Highlights: • A system dynamic model is established for future CO_2 emission trend of China's primary aluminum industry. • Three potential policy scenarios are simulated. • The impacts of potential policies implication on the CO_2 emission trend are discussed.

Planning of transport corridors by use of GIS

DEFF Research Database (Denmark)

Kronbak, Jacob; Moshøj, Claus Rehfeld; Grevy, Bo

1998-01-01

The paper adresses principles for the application of geographical information systems (GIS) as a tool in the planning of transport corridors. Specifically, the paper describes the COPE (corridor planning and evaluation) model that has been developed within the EU 4th FP Strategic Transport projects...

Spirit of place of Merdeka corridor in Selatpanjang City

Science.gov (United States)

Aldy, Pedia; Dharma, S. Mira

2018-03-01

Historical city area was developing by an accumulation of developmental stages which influenced by various factors. The factors are political, economic, social, cultural, and modernization. The research will discuss the spirit of place of Merdeka corridor in Selatpanjang city, Meranti Islands. The purpose is to identify the spirit of place of Merdeka corridor and to find out the tourism concept by characters that support urban tourism in Selatpanjang city. The research method used is qualitative research method with the rationalistic paradigm. Based on cultural history, physical building, and spatial pattern, Merdeka corridor has unique characteristic, and it persists if compared by another in Selatpanjang city. However, damage of corridor, physical changes, and functions can slowly happen due to modernization and cannot avoid.

System dynamic modelling of industrial growth and landscape ecology in China.

Science.gov (United States)

Xu, Jian; Kang, Jian; Shao, Long; Zhao, Tianyu

2015-09-15

With the rapid development of large industrial corridors in China, the landscape ecology of the country is currently being affected. Therefore, in this study, a system dynamic model with multi-dimensional nonlinear dynamic prediction function that considers industrial growth and landscape ecology is developed and verified to allow for more sustainable development. Firstly, relationships between industrial development and landscape ecology in China are examined, and five subsystems are then established: industry, population, urban economy, environment and landscape ecology. The main influencing factors are then examined for each subsystem to establish flow charts connecting those factors. Consequently, by connecting the subsystems, an overall industry growth and landscape ecology model is established. Using actual data and landscape index calculated based on GIS of the Ha-Da-Qi industrial corridor, a typical industrial corridor in China, over the period 2005-2009, the model is validated in terms of historical behaviour, logical structure and future prediction, where for 84.8% of the factors, the error rate of the model is less than 5%, the mean error rate of all factors is 2.96% and the error of the simulation test for the landscape ecology subsystem is less than 2%. Moreover, a model application has been made to consider the changes in landscape indices under four industrial development modes, and the optimal industrial growth plan has been examined for landscape ecological protection through the simulation prediction results over 2015-2020. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effects of vegetation, corridor width and regional land use on early successional birds on powerline corridors.

Directory of Open Access Journals (Sweden)

Robert A Askins

Full Text Available Powerline rights-of-way (ROWs often provide habitat for early successional bird species that have suffered long-term population declines in eastern North America. To determine how the abundance of shrubland birds varies with habitat within ROW corridors and with land use patterns surrounding corridors, we ran Poisson regression models on data from 93 plots on ROWs and compared regression coefficients. We also determined nest success rates on a 1-km stretch of ROW. Seven species of shrubland birds were common in powerline corridors. However, the nest success rates for prairie warbler (Dendroica discolor and field sparrow (Spizella pusilla were <21%, which is too low to compensate for estimated annual mortality. Some shrubland bird species were more abundant on narrower ROWs or at sites with lower vegetation or particular types of vegetation, indicating that vegetation management could be refined to favor species of high conservation priority. Also, several species were more abundant in ROWs traversing unfragmented forest than those near residential areas or farmland, indicating that corridors in heavily forested regions may provide better habitat for these species. In the area where we monitored nests, brood parasitism by brown-headed cowbirds (Molothrus ater occurred more frequently close to a residential area. Although ROWs support dense populations of shrubland birds, those in more heavily developed landscapes may constitute sink habitat. ROWs in extensive forests may contribute more to sustaining populations of early successional birds, and thus may be the best targets for habitat management.

Comprehensive highway corridor planning with sustainability indicators : [research summary].

Science.gov (United States)

2013-04-01

The Maryland State Highway Administration (SHA) has initiated major planning : efforts to improve transportation efficiency, safety and sustainability on critical : highway corridors through its Comprehensive Highway Corridor (CHC) program. : It is i...

Variable input parameter influence on river corridor prediction

NARCIS (Netherlands)

Zerfu, T.; Beevers, L.; Crosato, A.; Wright, N.

2015-01-01

This paper considers the erodible river corridor, which is the area in which the main river channel is free to migrate over a period of time. Due to growing anthropogenic pressure, predicting the corridor width has become increasingly important for the planning of development along rivers. Several

Iron Ore Industry Emissions as a Potential Ecological Risk Factor for Tropical Coastal Vegetation

Science.gov (United States)

Kuki, Kacilda N.; Oliva, Marco A.; Pereira, Eduardo G.

2008-07-01

In the coastal zone of the Espírito Santo state, Brazil, fragments of restinga, which form a natural ecosystem, share their space with an increasing number of iron ore industries. The iron ore dust and SO2 originating from the industry processing activities can interfere with the vegetation of the adjacent ecosystems at various levels. This study was undertaken in order to evaluate the effects of industry emissions on representative members of the restinga flora, by measuring physiological and phenological parameters. Foliar samples of Ipomoea pes caprae, Canavalia rosea, Sophora tomentosa, and Schinus terebinthifolius were collected at three increasing distances from an ore industry (1.0, 5.0, and 15.0 km), and were assessed for their dust deposition, chlorophyll, and Fe content. Phenological monitoring was focused on the formation of shoots, flowers, and fruits and was also performed throughout the course of a year. The results showed that the edaphic characteristics and the mineral constitutions of the plants were affected by industry emissions. In addition, the chlorophyll content of the four species increased with proximity to the industry. Phenological data revealed that the reproductive effort, as measured by fruit production, was affected by emissions and S. tomentosa was the most affected species. The use of an integrative approach that combines biochemical and ecological data indicates that the restinga flora is under stress due to industry emissions, which on a long-term basis may put the ecosystem at risk.

Using LMDI method to analyze the change of China's industrial CO2 emissions from final fuel use: An empirical analysis

International Nuclear Information System (INIS)

Liu Lancui; Fan Ying; Wu Gang; Wei Yiming

2007-01-01

Based on time series decomposition of the Log-Mean Divisia Index (LMDI), this paper analyzes the change of industrial carbon emissions from 36 industrial sectors in China over the period 1998-2005. The changes of industrial CO 2 emission are decomposed into carbon emissions coefficients of heat and electricity, energy intensity, industrial structural shift, industrial activity and final fuel shift. Our results clearly show that raw chemical materials and chemical products, nonmetal mineral products and smelting and pressing of ferrous metals account for 59.31% of total increased industrial CO 2 emissions. The overwhelming contributors to the change of China's industrial sectors' carbon emissions in the period 1998-2005 were the industrial activity and energy intensity; the impact of emission coefficients of heat and electricity, fuel shift and structural shift was relatively small. Over the year 1998-2002, the energy intensity change in some energy-intensive sectors decreased industrial emissions, but increased emissions over the period 2002-2005. The impact of structural shift on emissions have varied considerably over the years without showing any clear trend, and the final fuel shift increased industrial emissions because of the increase of electricity share and higher emissions coefficient. Therefore, raw chemical materials and chemical products, nonmetal mineral products and smelting and pressing of ferrous metals should be among the top priorities for enhancing energy efficiency and driving their energy intensity close to the international advanced level. To some degree, we should reduce the products waste of these sectors, mitigate the growth of demand for their products through avoiding the excessive investment highly related to these sectors, increasing imports or decreasing the export in order to avoid expanding their share in total industrial value added. However, all these should integrate economic growth to harmonize industrial development and CO 2

Estimation of methane emission from California natural gas industry.

Science.gov (United States)

Kuo, Jeff; Hicks, Travis C; Drake, Brian; Chan, Tat Fu

2015-07-01

Energy generation and consumption are the main contributors to greenhouse gases emissions in California. Natural gas is one of the primary sources of energy in California. A study was recently conducted to develop current, reliable, and California-specific source emission factors (EFs) that could be used to establish a more accurate methane emission inventory for the California natural gas industry. Twenty-five natural gas facilities were surveyed; the surveyed equipment included wellheads (172), separators (131), dehydrators (17), piping segments (145), compressors (66), pneumatic devices (374), metering and regulating (M&R) stations (19), hatches (34), pumps (2), and customer meters (12). In total, 92,157 components were screened, including flanges (10,101), manual valves (10,765), open-ended lines (384), pressure relief valves (358), regulators (930), seals (146), threaded connections (57,061), and welded connections (12,274). Screening values (SVs) were measured using portable monitoring instruments, and Hi-Flow samplers were then used to quantify fugitive emission rates. For a given SV range, the measured leak rates might span several orders of magnitude. The correlation equations between the leak rates and SVs were derived. All the component leakage rate histograms appeared to have the same trend, with the majority of leakage ratesGas Research Institute (EPA/GRI) study. Twenty-five natural gas facilities in California were surveyed to develop current, reliable, and California-specific source emission factors (EFs) for the natural gas industry. Screening values were measured by using portable monitoring instruments, and Hi-Flow samplers were then used to quantify fugitive emission rates. The component-level average EFs derived in this study are often smaller than the corresponding ones in the 1996 EPA/GRI study. The smaller EF values from this study might be partially attributable to the employment of the leak detection and repair program by most, if not all

Economic analysis of the reduction of dehydrator emissions in the natural gas industry

International Nuclear Information System (INIS)

Chalifoux, C.

1999-01-01

Under the Canadian Environmental Protection Act benzene has been designated as toxic, and after gasoline combustion, the natural gas extraction industry is the largest source of benzene emissions to the environment. The study's objective is to present a profile of the natural gas industry and to analyze the costs to the private sector of complying with the various benzene reduction targets. Also outlined is a profile of the natural gas extraction industry. A description is included of the method used to extrapolate the results obtained from the sample of 370 sites to the industry as a whole. Two scenarios studied are described in section four including: (1) scenario one in which the environmental requirements would have to be applied across-the-board to all emitting sites, which would have to comply with maximum benzene reductions, and (2) scenario two in which the environmental requirements would only be applied to high-emission sites, which would have to comply with specific requirements. A compilation is made in the fifth section for each scenario of the cost to the industry and the benzene emission reductions for each scenario for the sample of 370 sites to the industry as a whole. The aim of developing the two scenarios used to analyze various benzene emissions reduction levels at the sample of 370 sites was to determine: capital costs required, additional annual costs as additional annual operating costs plus annualized capital costs, number of sites affected, and total benzene reductions expressed in tonnes per year. 10 tabs

Energy and emission analysis for industrial motors in Malaysia

International Nuclear Information System (INIS)

Saidur, R.; Rahim, N.A.; Ping, H.W.; Jahirul, M.I.; Mekhilef, S.; Masjuki, H.H.

2009-01-01

The industrial sector is the largest user of energy in Malaysia. Industrial motors account for a major segment of total industrial energy use. Since motors are the principle energy users, different energy savings strategies have been applied to reduce their energy consumption and associated emissions released into the atmosphere. These strategies include using highly efficient motors, variable speed drive (VSD), and capacitor banks to improve the power factor. It has been estimated that there can be a total energy savings of 1765, 2703 and 3605 MWh by utilizing energy-efficient motors for 50%, 75% and 100% loads, respectively. It was also found that for different motor loads, an estimated US$115,936 US$173,019 and US$230,693 can be saved in anticipated energy costs. Similarly, it is hypothesized that a significant amount of energy can be saved using VSD and capacitor banks to reduce speed and improve the power factor, thus cutting energy costs. Moreover, a substantial reduction in the amount of emissions can be effected together with the associated energy savings for different energy savings strategies. In addition, the payback period for different energy savings strategies has been found to be reasonable in some cases.

Volatile organic compounds (VOCs) emission characteristics and control strategies for a petrochemical industrial area in middle Taiwan.

Science.gov (United States)

Yen, Chia-Hsien; Horng, Jao-Jia

2009-11-01

This study investigated VOC emissions from the largest petrochemical industrial district in Taiwan and recommended some control measures to reduce VOC emissions. In addition to the petrochemical industry, the district encompasses a chemical and fiber industry, a plastics industry and a harbor, which together produce more than 95% of the VOC emissions in the area. The sequence of VOC emission was as follows: components (e.g., valves, flanges, and pumps) (47%) > tanks (29%) > stacks (15%) > wastewater treatment facility (6%) > loading (2%) > flares (1%). Other plants producing high-density polyethylene (HDPE), styrene, ethylene glycol (EG), gas oil, and iso-nonyl-alchol (INA) were measured to determine the VOC leaching in the district. The VOC emissions of these 35 plants (90% of all plants) were less than 100 tons/year. About 74% of the tanks were fixed-roof tanks that leached more VOCs than the other types of tanks. To reduce leaching, the components should be checked periodically, and companies should be required to follow the Taiwan EPA regulations. A VOC emission management system was developed in state implementation plans (SIPs) to inspect and reduce emissions in the industrial district.

Training plan : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2013-01-01

The Dallas Area Rapid Transit (DART) is leading the US 75 Integrated Corridor Management (ICM) Demonstration Project for the Dallas region. Coordinated corridor operations and management is predicated on being able to share transportation information...

Test report : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2015-05-01

The Dallas Area Rapid Transit (DART) is leading the US 75 Integrated Corridor Management (ICM) : Demonstration Project for the Dallas region. Coordinated corridor operations and management is : predicated on being able to share transportation informa...

Final report : Dallas Integrated Corridor Management (ICM) Demonstration Project.

Science.gov (United States)

2015-08-01

The Dallas Area Rapid Transit (DART) is leading the US-75 Integrated Corridor Management (ICM) Demonstration Project for the Dallas region. Coordinated corridor operations and management is predicated on being able to share transportation information...

Industrial CO2 emissions from energy use in Korea: A structural decomposition analysis

International Nuclear Information System (INIS)

Lim, Hea-Jin; Yoo, Seung-Hoon; Kwak, Seung-Jun

2009-01-01

This paper attempts to quantify energy consumption and CO 2 emissions in the industrial sectors of Korea. The sources of the changes in CO 2 emissions for the years 1990-2003 are investigated, in terms of a total of eight factors, through input-output structural decomposition analysis: changes in emission coefficient (caused by shifts in energy intensity and carbon intensity); changes in economic growth; and structural changes (in terms of shifts in domestic final demand, exports, imports of final and intermediate goods, and production technology). The results show that the rate of growth of industrial CO 2 emissions has drastically decreased since the 1998 financial crisis in Korea. The effect on emission reductions due to changes in energy intensity and domestic final demand surged in the second period (1995-2000), while the impact of exports steeply rose in the third period (2000-2003). Of all the individual factors, economic growth accounted for the largest increase in CO 2 emissions. The results of this analysis can be used to infer the potential for emission-reduction in Korea

Energy conservation and emission reduction policies for the electric power industry in China

International Nuclear Information System (INIS)

Li Li; Tan Zhongfu; Wang Jianhui; Xu Jun; Cai Chengkai; Hou Yong

2011-01-01

Because of China's increasingly limited energy supplies and serious environmental pollution, much attention has been paid to conserving energy and reducing emissions to help the country's economy achieve sustainable development. As the electric power industry is the largest consumer of coal resources in China and also emits high levels of air pollutants each year, the Chinese government has enacted many technical and economic policies for energy conservation and emission reduction in the last few years. These policies are summarized in this paper, along with relevant laws and medium- and long-term plans, all of which address ideas such as adjusting the power generation mix, promoting demand-side management, introducing energy-efficient scheduling, and installing desulfurization units. The paper also assesses the results of these policies by analyzing several key indicators of energy consumption and emissions. The analysis shows that although some progress has been made in conserving energy and reducing emissions, substantial work is still required for China to catch up with developed countries. Some suggestions for future work are provided. - Highlights: → China has made many policies for reducing the power industries' energy consumption and emissions. → Progress has been made in conserving energy and reducing emission of the electric power industry. → Substantial works need to be done for China to catch up with the level of developed country. → Market mechanisms for conserving energy and reducing emission should be constructed in the future.

Final report: Prototyping a combustion corridor; FINAL

International Nuclear Information System (INIS)

Rutland, Christopher J.; Leach, Joshua

2001-01-01

The Combustion Corridor is a concept in which researchers in combustion and thermal sciences have unimpeded access to large volumes of remote computational results. This will enable remote, collaborative analysis and visualization of state-of-the-art combustion science results. The Engine Research Center (ERC) at the University of Wisconsin - Madison partnered with Lawrence Berkeley National Laboratory, Argonne National Laboratory, Sandia National Laboratory, and several other universities to build and test the first stages of a combustion corridor. The ERC served two important functions in this partnership. First, we work extensively with combustion simulations so we were able to provide real world research data sets for testing the Corridor concepts. Second, the ERC was part of an extension of the high bandwidth based DOE National Laboratory connections to universities

ENERGY SOURCES AND CARBON EMISSIONS IN THE IRON AND STEEL INDUSTRY SECTOR IN SOUTH ASIA

Directory of Open Access Journals (Sweden)

Tapan Sarker

2013-01-01

Full Text Available This paper examines CO2 emissions from electricity and fuel consumption of different energy sources consumed in the Iron and Steel Industry sector (non-ferrous included, also known as basic metal in five South Asian countries including Bangladesh, India, Nepal, Sri Lanka and Pakistan. The study finds that about 30% of the total energy in the manufacturing industry is used in this sector, which is about 11% of total industrial input, contributing approximately 13% to the Manufacturing Value Added (MVA. Electricity, on the other hand, shares almost 60% of total energy consumption in the five countries in South Asia, followed by natural gas, coal, kerosene and diesel. The study also finds that CO2 emissions vary across sectors in countries in which the study was conducted. For instance, while in Bangladesh CO2 emissions are primarily caused by electricity generation, in India the majority of CO2 emissions are originated from coal. On the contrary, CO2 emissions in Nepal are mostly generated through other fuels such as Charcoal, Diesel and Kerosene. This study provides some policy recommendations, which could help reduce CO2 emissions in the Iron and Steel Industry sector in the South Asian region.

Bipole III transmission line Henday-Riel: Alternative corridors status report

International Nuclear Information System (INIS)

1991-01-01

As part of expansion plans in the Manitoba Hydro system, it is proposed to build a 850-km high voltage dc transmission line from the Henday converter station on the Nelson River to a new converter station near Winnipeg. A review is provided of work done on the first stage of route selection and environmental assessment for this project. Right-of-way requirements are outlined and environmental impact issues are discussed in the areas of employment and business opportunities, effects on wilderness areas and aesthetics, electric and magnetic field effects, and land use. The four zones, east and west of Lake Winnipeg, that were studied in the selection of potential corridors are described along with the corridor siting criteria. Five discrete corridor alternatives are identified and evaluated. A route east of Lake Winnipeg has been selected as the preferred corridor. Feedback from public consultations will assist in preparation of a final corridor selection study which is to be submitted to federal and provincial environmental review. 12 figs

Introducing renewable energy and industrial restructuring to reduce GHG emission: Application of a dynamic simulation model

International Nuclear Information System (INIS)

Song, Junnian; Yang, Wei; Higano, Yoshiro; Wang, Xian’en

2015-01-01

Highlights: • Renewable energy development is expanded and introduced into socioeconomic activities. • A dynamic optimization simulation model is developed based on input–output approach. • Regional economic, energy and environmental impacts are assessed dynamically. • Industrial and energy structure is adjusted optimally for GHG emission reduction. - Abstract: Specifying the renewable energy development as new energy industries to be newly introduced into current socioeconomic activities, this study develops a dynamic simulation model with input–output approach to make comprehensive assessment of the impacts on economic development, energy consumption and GHG emission under distinct levels of GHG emission constraints involving targeted GHG emission reduction policies (ERPs) and industrial restructuring. The model is applied to Jilin City to conduct 16 terms of dynamic simulation work with GRP as objective function subject to mass, value and energy balances aided by the extended input–output table with renewable energy industries introduced. Simulation results indicate that achievement of GHG emission reduction target is contributed by renewable energy industries, ERPs and industrial restructuring collectively, which reshape the terminal energy consumption structure with a larger proportion of renewable energy. Wind power, hydropower and biomass combustion power industries account for more in the power generation structure implying better industrial prospects. Mining, chemical, petroleum processing, non-metal, metal and thermal power industries are major targets for industrial restructuring. This method is crucial for understanding the role of renewable energy development in GHG mitigation efforts and other energy-related planning settings, allowing to explore the optimal level for relationships among all socioeconomic activities and facilitate to simultaneous pursuit of economic development, energy utilization and environmental preservation

Response of Wolves to Corridor Restoration and Human Use Management

Directory of Open Access Journals (Sweden)

Brenda Shepherd

2006-12-01

Full Text Available Corridor restoration is increasingly being used to connect habitat in mountainous areas where rugged topography and increasing human activity fragment habitat. Wolves (Canis lupus are a conservation priority because they avoid areas with high levels of human use and are ecologically important predators. We examined how corridor restoration through a golf course changes the distribution of wolves and their prey in Jasper National Park, Alberta, Canada. We followed and recorded wolf paths in the snow both within the corridor and in the surrounding landscape before and after a corridor was re-established. Track transects were used to estimate prey abundance and snow depths, and trail counters measured human activity. We compared resources on wolf paths to available movement routes using conditional logistic regression and also compared resources used by wolves before and after restoration. We addressed potential confounding effects of prey abundance, snow depths, and levels of human use by testing for changes in these variables. Prior to restoration, wolves traveled around the golf course and used the mountainside to connect valley-bottom habitat. Conversely, elk (Cervus elaphus densities were highest in the golf course. After restoration, wolves shifted most of their movement to the golf course corridor, whereas elk dispersed along the corridor and mountainside. When traveling through the study area, wolves selected for areas with high prey abundance, low elevations, and low levels of human activity. Corridor restoration increased the area of high quality habitat available to wolves and increased their access to elk and deer at low elevations. Our results corroborate other studies suggesting that wolves and elk quickly adapt to landscape changes and that corridor restoration can improve habitat quality and reduce habitat fragmentation.

Revisiting the emissions-energy-trade nexus: evidence from the newly industrializing countries.

Science.gov (United States)

Ahmed, Khalid; Shahbaz, Muhammad; Kyophilavong, Phouphet

2016-04-01

This paper applies Pedroni's panel cointegration approach to explore the causal relationship between trade openness, carbon dioxide emissions, energy consumption, and economic growth for the panel of newly industrialized economies (i.e., Brazil, India, China, and South Africa) over the period of 1970-2013. Our panel cointegration estimation results found majority of the variables cointegrated and confirm the long-run association among the variables. The Granger causality test indicates bidirectional causality between carbon dioxide emissions and energy consumption. A unidirectional causality is found running from trade openness to carbon dioxide emission and energy consumption and economic growth to carbon dioxide emissions. The results of causality analysis suggest that the trade liberalization in newly industrialized economies induces higher energy consumption and carbon dioxide emissions. Furthermore, the causality results are checked using an innovative accounting approach which includes forecast-error variance decomposition test and impulse response function. The long-run coefficients are estimated using fully modified ordinary least square (FMOLS) method, and results conclude that the trade openness and economic growth reduce carbon dioxide emissions in the long run. The results of FMOLS test sound the existence of environmental Kuznets curve hypothesis. It means that trade liberalization induces carbon dioxide emission with increased national output, but it offsets that impact in the long run with reduced level of carbon dioxide emissions.

Adverse effects of the automotive industry on carbon dioxide emissions

OpenAIRE

Mpho Bosupeng

2016-01-01

This study aims to determine the effects of the automotive industry on carbon dioxide emissions for the period from 1997 to 2010 for diverse economies, as well as the relationships between carbon dioxide discharges and output. The study applies cointegration and causality tests to validate these associations. The results of the Johansen cointegration test depict long-run associations between the quantity of passenger cars and carbon dioxide emissions in France, Sweden, Spain, Hungary and Japa...

78 FR 7477 - Multistate Corridor Operations and Management Program

Science.gov (United States)

2013-02-01

... in the Multistate Corridor Operations and Management Program authorized by the Safe, Accountable... projects to improve multimodal transportation system management and operations. This notice seeks... Multistate Corridor Operations and Management (MCOM) programs and projects. The purpose of these investments...

Industrial Process Cooling Towers: National Emission Standards for Hazardous Air Pollutants

Science.gov (United States)

Standards limiting discharge of chromium compound air emissions from industrial process cooling towers (IPCT's). Includes rule history, Federal Registry citations, implementation information and additional resources.

Working group report: methane emissions from fuel combustion and industrial processes

International Nuclear Information System (INIS)

Berdowski, J.J.M.; Beck, L.; Piccot, S.; Olivier, J.G.J.; Veldt, C.

1993-01-01

This paper lists the source categories which are currently recognised as minor sources of methane. These fall into five broad groups: stationary fuel combustion (residential combustion of fuels, solid waste incineration at home sites, on-site agricultural waste burning, industrial and utility combustion of coal, wood, oil and gas, commercial and industrial waste incineration); mobile fuel combustion; non-combustion industrial processes (primary metals production, chemical manufacturing processes, petroleum refining, commercial charcoal manufacturing waste treatments); minor energy production sources (storage and distribution of automotive fuels, geothermal energy production; peat mining operations, oil shale mining operations); and miscellaneous sources. The paper also presents a preliminary estimate of global methane emissions from these minor sources and the results of the working group's discussion on recommendations for the IPCC/OECD methodology and specific research needs. A list of control options for emissions from minor sources is provided. 2 tabs

Curbing Air Pollution and Greenhouse Gas Emissions from Industrial Boilers in China

Energy Technology Data Exchange (ETDEWEB)

Shen, Bo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Lynn K [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lu, Hongyou [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Liu, Xu [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tsen, Katherine [Univ. of California, Berkeley, CA (United States); Xiangyang, Wei [National Energy Conservation Center (China); Yunpeng, Zhang [National Energy Conservation Center (China); Jian, Guan [China Special Equipment Inspection & Test Inst. (China); Rui, Hou [China Machinery Industry Conservation & Resource Utilization Center (China); Junfeng, Zhang [China National Offshore Oil Corp. (China); Yuqun, Zhuo [Tsinghua Univ., Beijing (China); Shumao, Xia [China Energy Conservation & Environmental Protection Group (China); Yafeng, Han [Xi' an Jiatong Univ. (China); Manzhi, Liu [China Univ. of Mining and Technology (China)

2015-10-28

China’s industrial boiler systems consume 700 million tons of coal annually, accounting for 18% of the nation’s total coal consumption. Together these boiler systems are one of the major sources of China’s greenhouse gas (GHG) emissions, producing approximately 1.3 gigatons (Gt) of carbon dioxide (CO₂) annually. These boiler systems are also responsible for 33% and 27% of total soot and sulfur dioxide (SO2) emissions in China, respectively, making a substantial contribution to China’s local environmental degradation. The Chinese government - at both the national and local level - is taking actions to mitigate the significant greenhouse gas (GHG) emissions and air pollution related to the country’s extensive use of coal-fired industrial boilers. The United States and China are pursuing a collaborative effort under the U.S.-China Climate Change Working Group to conduct a comprehensive assessment of China’s coal-fired industrial boilers and to develop an implementation roadmap that will improve industrial boiler efficiency and maximize fuel-switching opportunities. Two Chinese cities – Ningbo and Xi’an – have been selected for the assessment. These cities represent coastal areas with access to liquefied natural gas (LNG) imports and inland regions with access to interprovincial natural gas pipelines, respectively.

Energy-Efficiency and Air-Pollutant Emissions-Reduction Opportunities for the Ammonia Industry in China

Energy Technology Data Exchange (ETDEWEB)

Ma, Ding [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chen, Wenying [Tsinghua Univ., Beijing (China)

2015-06-01

As one of the most energy-intensive and polluting industries, ammonia production is responsible for significant carbon dioxide (CO₂) and air-pollutant emissions. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate greenhouse gas emissions and improve air quality, lack of understanding of the cost-effectiveness of such improvements has been a barrier to implementing these measures. Assessing the costs, benefits, and cost-effectiveness of different energy-efficiency measures is essential to advancing this understanding. In this study, a bottom-up energy conservation supply curve model is developed to estimate the potential for energy savings and emissions reductions from 26 energy-efficiency measures that could be applied in China’s ammonia industry. Cost-effective implementation of these measures saves a potential 271.5 petajoules/year for fuel and 5,443 gigawatt-hours/year for electricity, equal to 14% of fuel and 14% of electricity consumed in China’s ammonia industry in 2012. These reductions could mitigate 26.7 million tonnes of CO₂ emissions. This study also quantifies the co-benefits of reducing air-pollutant emissions and water use that would result from saving energy in China’s ammonia industry. This quantitative analysis advances our understanding of the cost-effectiveness of energy-efficiency measures and can be used to augment efforts to reduce energy use and environmental impacts.

CORRIDOR-TYPE BAFFLED MIXING BASIN WITH CROSS POROUS BARRIERS

Directory of Open Access Journals (Sweden)

S. M. Epoyan

2018-02-01

Full Text Available Purpose. The paper hightlights the increase in operational efficiency of corridor-type baffled mixing basin by installing of cross porous barriers made of gravel (or other materials and epoxy resin, grade ED-20 (ED-16 with the hardener polyethylenepolyamine (PEPA, approved by Ukrainian Ministry of Health in systems of utility and drinking water supply. Methodology. The first stage of the experiments was performed on the model of the proposed mixer in scale 1:4 in order to determine the local resistance of the porous barrier, which is made of gravel with a size of 10-15 mm (average diameter 12.5 mm and thickness of 50 mm. The local resistance of the barrier was measured using piezometers installed before and after the porous barrier. The velocity of water motion in the corridor of the mixer was determined depending on the water consumption, incoming on the mixer accordingly to the water meter and by the volumetric method. Findings. In accordance with researches when the water flows at a velocity of 0.1 m/s in the corridor of the mixer, the head losses in the porous barrier is 17 cm (0.17 m, and at a velocity of 0.2 m/s–0.68 m. The resistance coefficient (ξ, which is equal to 333.2 for the investigated barrier, was determined experimentally. It allows determining the head losses in the porous barrier at other velocities of water motion. When the velocity of water motion in the corridors of the mixer is from 0.7 up to 0.5 m/s, head losses increase almost fourfold. The conducted researches allowed to develop a calculation methodology for corridor-type baffled mixing basin with porous polymer-concrete barriers. Originality. Authors developed and investigated the corridor-type baffled mixing basin with porous polymer-concrete barriers. These barriers allow increasing and regulating the intensity and time of reagents mixing with the initial water exactly in the barriers, improving the distribution of the flow through the section of the mixer

78 FR 23815 - Northeast Corridor Safety Committee; Notice of Meeting

Science.gov (United States)

2013-04-22

.... 6] Northeast Corridor Safety Committee; Notice of Meeting AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Announcement of the Northeast Corridor Safety Committee (NECSC) Meeting. [[Page 23816

METHANE EMISSIONS FROM THE NATURAL GAS INDUSTRY VOLUME 13: CHEMICAL INJECTION PUMPS

Science.gov (United States)

The 15-volume report summarizes the results of a comprehensive program to quantify methane (CH4) emissions from the U.S. natural gas industry for the base year. The objective was to determine CH4 emissions from the wellhead and ending downstream at the customer's meter. The accur...

Acid emissions monitoring needs in ceramic tile industry: challenges derived from new policy trends

Science.gov (United States)

Celades, Irina; Gomar, Salvador; Romero, Fernando; Chauhan, Amisha; Delpech, Bertrand; Jouhara, Hussam

2017-11-01

The emission of acid compounds during the manufacture of ceramic tiles is strongly related to the presence of precursors in the raw materials and/or fuels used, with some exceptions such as the production of thermal NOX. The stages with the potential to produce significant emissions of these compounds have been identified as the suspension spray drying and tile firing stages. The monitoring of emission levels of acid pollutants in these stages has turned in a great importance issue from a regulatory and industrial aspect. The DREAM project (https://www.spire2030.eu/dream) will tackle the regulation of acidic emissions focusing in the firing stage. The initial stages of the project have made it possible to identify the design requirements for the monitoring system. This will allow the control of acid pollutants emissions and other key parameters such as pressure, flow, temperature and humidity. One of the tasks developed has been the review and compilation of current emissions monitoring systems detailing technical specifications such as: position (in situ or extractive), measurement principle and frequency. The future policy trends in air pollution are encouraging the continuous monitoring across the European industry. The present document assesses the advantages regarding environmental impact control, highlighting the main challenges for the ceramic tile industry.

Benchmarking energy use and greenhouse gas emissions in Singapore's hotel industry

International Nuclear Information System (INIS)

Wu Xuchao; Priyadarsini, Rajagopalan; Eang, Lee Siew

2010-01-01

Hotel buildings are reported in many countries as one of the most energy intensive building sectors. Besides the pressure posed on energy supply, they also have adverse impact on the environment through greenhouse gas emissions, wastewater discharge and so on. This study was intended to shed some light on the energy and environment related issues in hotel industry. Energy consumption data and relevant information collected from hotels were subjected to rigorous statistical analysis. A regression-based benchmarking model was established, which takes into account, the difference in functional and operational features when hotels are compared with regard to their energy performance. In addition, CO 2 emissions from the surveyed hotels were estimated based on a standard procedure for corporate GHG emission accounting. It was found that a hotel's carbon intensity ranking is rather sensitive to the normalizing denominator chosen. Therefore, carbon intensity estimated for the hotels must not be interpreted arbitrarily, and industry specific normalizing denominator should be sought in future studies.

Étude de l'impact d'une industrie cimentière sur la composition ...

African Journals Online (AJOL)

Study of the cement factory impact on the rainwater physico-chimical composition in the central part of Oujda-Taourirt corridor (Eastern Morocco). In the central part of Oujda-Taourirt corridor (Morocco), Holcim-Oujda cement factory constitutes the main industrial unit can participates in the atmospheric pollution. It is located ...

The Thirty Years’ Results of Radiation Hygienic Monitoring of Tula Region territories contaminated due to the Chernobyl NPP accident

Directory of Open Access Journals (Sweden)

V. V. Boldyreva

2016-01-01

Full Text Available Over 50% of Tula Region areas were contaminated after the Chernobyl NPP accident. The article provides the thirty years’ results of radiation hygienic monitoring of the Chernobyl accidental fallout - affected areas in Tula Region. The radiation situation is assessed at the initial accidental period and at the current stage. The initial levels of gamma - radiation dose intensity (up to 35 mcSv/hr are identified for the period of the “iodine” hazard along with the tabular data on the dose intensity relative stabilization by the beginning of August 1986 due to iodine-131 decay. The information is presented regarding iodine-131 tentative maximum permissible level exceedance in the dairy products of the two most contaminated regional areas - Plavskoye and Arsenievskoye. The article also provides the laboratory data on the total beta - activity in the foodstuffs in 1986-1987 and cesium-137 maximum permissible level exceedence in 1986. The radionuclide maximum permissible level exceedances in foodstuffs were registered only in 1986 due to the plants surface contamination whereas in the forest mushrooms those exceedances were repeatedly found until 2004. The black earths and grey forest soils had a benign impact upon the intensity of the radionuclide transfer into plants which resulted in the formation of internal radiation doses.At the current stage, the content of cesium-137 and strontium- 90 in the foodstuffs can only be quantified by a radiochemical method. The table covers all the districts within the boundaries of radiation contaminated zones. The radiochemical studies indicate the main dose - forming products. The article contains the table of internal and external radiation doses of the population in Plavsk town over 1986-1990 and displays the factors impacting population’s internal and external exposure. The Chernobyl - affected exposure dose of the population is mostly attributed to the external radiation and, for over twenty years, it

Air Pollution Studies in Central Russia (Tula Region) Using Moss Biomonitoring Technique, NAA and AAS

CERN Document Server

Ermakova, E V; Steinnes, E

2002-01-01

For the first time the moss biomonitoring technique has been applied to air pollution monitoring in Central Russia (Tula Region). Moss samples were collected from 83 sites in accordance with the sampling strategy of European projects on biomonitoring of atmospheric deposition. Neutron activation analysis (NAA) at the IBR-2 reactor has made it possible to determine the concentration of 33 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Br, Rb, Sr, Mo, Sb, I, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Th, U) over a large concentration range (from 10000 mg/kg for K to 0.001 mg/kg for Tb and Ta). In addition to NAA, flame AAS (atomic absorption spectrometry) was applied to determine the concentration of Cd, Cu and Pb. Factor analysis was applied to determine possible sources of elements detected in the investigated mosses. Eight factors were identified. The geographical distribution of factor scores is presented. The interpretation of the factor analysis findings points to natural as well as anthr...

Heavy Metals and Trace Elements Atmospheric Deposition Studies in Tula Region Using Moss Biomonitors Technique

CERN Document Server

Ermakova, E V; Steinnes, E

2002-01-01

For the first time the moss biomonitors technique was used in air pollution studies in Tula Region (Central Russia), applying NAA, AAS. Moss samples were collected at 83 sites in accordance with the sampling strategy adopted in European projects on biomonitoring atmospheric deposition. A wide set of trace elements in mosses was determined. The method of epithermal neutron activation at IBR-2 reactor of FLNP JINR has made it possible to identify 33 elements (Na, Mg, Al, Cl, K, Ca, Sc, V, Cr, Mn, Fe, Co, Ni, Zn, As, Br, Rb, Sr, Mo, Sb, I, Cs, Ba, La, Ce, Sm, Tb, Yb, Hf, Ta, W, Th, U) in the large-scale concentration range - from 10000 ppm for K to 0,001 ppm for Tb and Ta. Cu, Cd and Pb were determined by the flame AAS in the Norwegian Institute of Science and Technology. Using the graphical technique and principal component analysis allowed to separate plant, crustal and general pollution components in the moss. The obtained data will be used for constructing coloured maps of the distribution of elements over t...

Multi-sectoral decomposition in decoupling industrial growth from carbon emissions in the developed Jiangsu Province, China

International Nuclear Information System (INIS)

Lu, Qinli; Yang, Hong; Huang, Xianjin; Chuai, Xiaowei; Wu, Changyan

2015-01-01

ICE (Industrial carbon emission) is one of most important sources of anthropogenic carbon emissions. To reduce the carbon emissions, many countries, particularly China, have adjusted their industrial structures and improved energy efficiency. The complete decomposition technique and decoupling method were used to investigate and quantitatively analyze the main factors influencing the energy-related ICE in Jiangsu, the Chinese province with the largest energy consumption and carbon emissions. The importance of the sectoral dimension was taken into account by dividing the industry into three main departments consisting of 38 sub-sectors. The results indicated that the industry of Jiangsu was in a weak decoupling state from 2005 to 2012. The industrial output growth was the biggest driver of the increase in ICE, while energy efficiency advancement was the main cause for the reduction, in a weakening trend. The year of 2008 was an important breaking point when the optimization of industry structure came into play and global financial crisis took place. The biggest dilemma in Jiangsu is heavy industry is still dominant, especially the five sectors of them made the biggest contribution (88.2%) to ICE. Thankfully, there were five manufacturing industries had achieved low carbon economy at various degrees. - Highlights: • Multi-sectoral decomposition and decoupling were conducted to evaluate the ICE. • The industry of Jiangsu was in a weak decoupling state with an increasing trend. • The industrial output growth was the biggest driver for ICE from 2005 to 2012. • The optimization of industry structure came into play for the reduction since 2008. • Five backward and advanced industries were identified

Realizing CO2 emission reduction through industrial symbiosis: A cement production case study for Kawasaki

OpenAIRE

Hashimoto, Shizuka; Fujita, Tsuyoshi; Geng, Yong; Nagasawa, Emiri

2010-01-01

This article is one effort to examine the present and potential performances of CO2 emission reduction though industrial symbiosis by employing a case study approach and life cycle CO2 analysis for alternative industrial symbiosis scenarios. As one of the first and the best-known eco-town projects, Kawasaki Eco-town was chosen as a case study area. First, the current industrial symbiosis practices in this area are introduced. To evaluate the potential of reducing the total CO2 emission throug...

77 FR 73734 - Northeast Corridor Safety Committee; Notice of Meeting

Science.gov (United States)

2012-12-11

.... 5] Northeast Corridor Safety Committee; Notice of Meeting AGENCY: Federal Railroad Administration (FRA), Department of Transportation (DOT). ACTION: Announcement of a Northeast Corridor Safety... Committee is made up of stakeholders operating on the [[Page 73735

Concept of operations : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2010-06-01

This concept of operations (Con Ops) for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US : Department of Transportation Integrated Corridor Management Initiative, which is an innovative research initiative ...

Comprehensive evaluation of industrial CO2 emission (1989-2004) in Taiwan by input-output structural decomposition

International Nuclear Information System (INIS)

Chang, Yih F.; Lewis, Charles; Lin, Sue J.

2008-01-01

Taiwan currently emits approximately 1% of the world's CO 2 - ranking it 22nd among nations. Herein, we use the input-output (I-O) structural decomposition method to examine the changes in CO 2 emission over a 15-year period. By decomposing the CO 2 emission changes into nine factors for the periods of 1989-1994, 1994-1999, and 1999-2004, we have identified the key factors causing the emission changes, as well as the most important trends regarding the industrial development process in Taiwan. The 5-year increment with the largest increase of CO 2 emission was that of 1999-2004, due to the rapid increase of electricity consumption. From the decomposition, the industrial energy coefficient and the CO 2 emission factors were identified as the most important parameters for the determination of the highway, petrochemical materials, iron and steel, the commercial sector, and electric machinery as the major sources of increased CO 2 emission during the past 15 years. From 1989 to 2004, the level of exports and the level of domestic final demand were the largest contributors to the increase in the total increment of CO 2 change. During 1989-2004, the industrial energy coefficient and CO 2 emission factors, being minimally significant during 1989-1994, became extremely important, joining the domestic final demand and the level of exports factors as the major causes of the increase increment of CO 2 . This indicates a heavy reliance upon high-energy (and CO 2 ) intensity for Taiwanese industries; therefore, continuous efforts to improve energy intensity and fuel mix toward lower carbon are important for CO 2 reduction, especially for the electricity and power generation sectors. Relevant strategies for reducing carbon dioxide emissions from major industries are also highlighted. (author)

High-speed surface transportation corridor : a conceptual framework, final report.

Science.gov (United States)

2009-10-08

Efficient transportation is indispensable for economic growth and prosperity. In this study we propose the development of a high-speed surface corridor and compatible vehicles. We present a conceptual framework for this corridor and vehicle. This pro...

Spatiotemporal Changes of Built-Up Land Expansion and Carbon Emissions Caused by the Chinese Construction Industry.

Science.gov (United States)

Chuai, Xiaowei; Huang, Xianjin; Lu, Qinli; Zhang, Mei; Zhao, Rongqin; Lu, Junyu

2015-11-03

China is undergoing rapid urbanization, enlarging the construction industry, greatly expanding built-up land, and generating substantial carbon emissions. We calculated both the direct and indirect carbon emissions from energy consumption (anthropogenic emissions) in the construction sector and analyzed built-up land expansion and carbon storage losses from the terrestrial ecosystem. According to our study, the total anthropogenic carbon emissions from the construction sector increased from 3,905×10(4) to 103,721.17×10(4) t from 1995 to 2010, representing 27.87%-34.31% of the total carbon emissions from energy consumption in China. Indirect carbon emissions from other industrial sectors induced by the construction sector represented approximately 97% of the total anthropogenic carbon emissions of the sector. These emissions were mainly concentrated in seven upstream industry sectors. Based on our assumptions, built-up land expansion caused 3704.84×10(4) t of carbon storage loss from vegetation between 1995 and 2010. Cropland was the main built-up land expansion type across all regions. The study shows great regional differences. Coastal regions showed dramatic built-up land expansion, greater carbon storage losses from vegetation, and greater anthropogenic carbon emissions. These regional differences were the most obvious in East China followed by Midsouth China. These regions are under pressure for strong carbon emissions reduction.

Economic benefits of reducing emissions from the cement industry

International Nuclear Information System (INIS)

El-Fadel, M.; Metni, M.; Nuwayhid, M.I.; Kobrossi, R.

1999-01-01

Full text.Air pollution has recently been a growing concern in Lebanon particularly around industrial facilities and in urban areas. The cement industry constitutes a major polluting source and its impacts have historically raised considerable local public concern, as was previously the case in many developed countries. In this context, the town of Chekka, which is the site of four cement factories, has been the subject of long-lived controversy with respect to emissions and potential adverse environmental impacts. While field observations and public health complains support the presence of such impacts., scientific data are almost non-existent to adequately evaluate the actual situation. This paper describes recent efforts conducted towards a proper air quality characterization in order to shed light on the extent and nature of the impact of the cement industry in the Chekka region on its immediate vicinity. For this purpose, continuous monitoring of selected air pollutants (particulate matter, nitrogen dioxide, and carbon monoxide) was conducted during a limited period. In addition, pollutant dispersion modeling was performed to better define exposure areas. Field measurements coupled with simulation results were linked to a survey questionnaire to assess potential health and material damage on a sample area. The economic benefits of emissions reduction of selected pollutants are presented in the context of the results obtained during this study

Industry in the 5th Environmental Outlook. Background information and final conclusions on the future development of environmental pressure (emissions) due to industrial production in the Netherlands

International Nuclear Information System (INIS)

Wesselink, L.G.; Elzenga, H.E.; Booij, H.; Peek, K.; Thomas, R.; Duvoort, G.L.; Van Schijndel, M.W.

2001-01-01

The present and future development of environmental pressure (here emissions) due to industrial production in the Netherlands are discussed. Results were - strongly aggregated - also presented in the 5th Environmental Outlook. We studied developments in production levels, energy use and emissions of Dutch industry and the effect of environmental policy measures, in the period 1980-2020. We used monitoring data for the period 1980-1998 en two scenarios (Global Competition and European Coordination) for the subsequent 1998-2020 period. It is concluded, that future CO2 emissions due to industrial production will continue to increase, that emissions of fluorinated (Kyoto) gasses will strongly decrease and that emissions of NOx, SO2, VOS en fine particles will continue to decrease. Yet, current environmental policy is insufficient to meet national Dutch emission targets of NOx, SO2, VOS in 2010

Ammonia emissions from livestock industries in Canada: Feasibility of abatement strategies

International Nuclear Information System (INIS)

Carew, Richard

2010-01-01

An updated national ammonia (NH 3 ) emissions inventory was employed to study the relationship between NH 3 emissions and livestock industries in Canada. Emissions from animal agriculture accounted for 322 kilotonnes (kt) or 64% of Canadian NH 3 emissions in 2002. Cattle and swine accounted for the bulk of livestock emissions. The provinces of Alberta, Ontario, Quebec, and Saskatchewan accounted for 28.1%, 22.0%, 18.7%, and 13.1% of total livestock emissions, respectively. Emissions from Ontario and Quebec were attributed to the intensive production of dairy, hogs and poultry. Dairy cattle emissions per hectolitre of milk were higher in Ontario and Quebec than in other provinces, while swine emissions per livestock unit were higher than either beef or dairy cattle. A review of the abatement literature indicated diet manipulation to improve N efficiency and land spreading methods are very effective techniques to lower NH 3 emissions. Future research is required to evaluate the feasibility of biofilters and feces/urine separation methods. - Livestock NH 3 emissions are higher in areas characterized by intensive livestock production with diet manipulation and land spreading offering the greatest potential for NH 3 abatement options.

Does the high–tech industry consistently reduce CO{sub 2} emissions? Results from nonparametric additive regression model

Energy Technology Data Exchange (ETDEWEB)

Xu, Bin [School of Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013 (China); Research Center of Applied Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013 (China); Lin, Boqiang, E-mail: bqlin@xmu.edu.cn [Collaborative Innovation Center for Energy Economics and Energy Policy, China Institute for Studies in Energy Policy, Xiamen University, Xiamen, Fujian 361005 (China)

2017-03-15

China is currently the world's largest carbon dioxide (CO{sub 2}) emitter. Moreover, total energy consumption and CO{sub 2} emissions in China will continue to increase due to the rapid growth of industrialization and urbanization. Therefore, vigorously developing the high–tech industry becomes an inevitable choice to reduce CO{sub 2} emissions at the moment or in the future. However, ignoring the existing nonlinear links between economic variables, most scholars use traditional linear models to explore the impact of the high–tech industry on CO{sub 2} emissions from an aggregate perspective. Few studies have focused on nonlinear relationships and regional differences in China. Based on panel data of 1998–2014, this study uses the nonparametric additive regression model to explore the nonlinear effect of the high–tech industry from a regional perspective. The estimated results show that the residual sum of squares (SSR) of the nonparametric additive regression model in the eastern, central and western regions are 0.693, 0.054 and 0.085 respectively, which are much less those that of the traditional linear regression model (3.158, 4.227 and 7.196). This verifies that the nonparametric additive regression model has a better fitting effect. Specifically, the high–tech industry produces an inverted “U–shaped” nonlinear impact on CO{sub 2} emissions in the eastern region, but a positive “U–shaped” nonlinear effect in the central and western regions. Therefore, the nonlinear impact of the high–tech industry on CO{sub 2} emissions in the three regions should be given adequate attention in developing effective abatement policies. - Highlights: • The nonlinear effect of the high–tech industry on CO{sub 2} emissions was investigated. • The high–tech industry yields an inverted “U–shaped” effect in the eastern region. • The high–tech industry has a positive “U–shaped” nonlinear effect in other regions. • The linear impact

Voluntary initiatives for managing greenhouse gas emissions : How is industry doing?

International Nuclear Information System (INIS)

Peirce, C.

1998-01-01

This paper attempted to show that energy industries in Canada have been constructively engaged in global warming issues of legitimate concern to Canadians for many years. As an example, the Canadian Association of Petroleum Producers (CAPP) was the first industry association to commit to the Voluntary Challenge and Registry (VCR) program to stabilize greenhouse gas emissions at 1990 levels by year 2000. CAPP supports improvements in energy efficiency, conservation, research, public education and technology transfer to developing countries. Since the VCR program was implemented in 1995, industry has reduced emissions by almost nine million tonnes. The implications of the Kyoto Protocol for Canada were also reviewed. It was stated that achieving the target of 20-25 per cent reductions from 'business as usual' by 2008-2012 will affect all energy consumers in all regions of the country. It was emphasized that it will be crucial to encourage action before 2008. In evolving from the present voluntary action to flexible but binding action it will be necessary to clearly define credit for early action, promote research and technology, focus on Canadian needs in designing flexibility instruments. The flexibility instruments in the Kyoto Protocol are: (1) emissions trading within annex 1 countries, (2) a clean development mechanism, and (3) carbon sinks. All of these instruments have been ill-defined up-to-now and there is much uncertainty regarding rules, modalities and guidelines

Control Strategies for Corridor Management

Science.gov (United States)

2016-06-28

Integrated management of travel corridors comprising of freeways and adjacent arterial streets can potentially improve the performance of the highway facilities. However, several research gaps exist in data collection and performance measurement, ana...

Tracking industrial energy efficiency and CO2 emissions

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-06-25

Industry accounts for about one-third of global energy demand. Most of that energy is used to produce raw materials: chemicals, iron and steel, non-metallic minerals, pulp and paper and non-ferrous metals. Just how efficiently is this energy put to work? This question was on the minds of the G8 leaders at their summit in Gleneagles in 2005, when they set a 'Plan of Action for Climate Change, Clean Energy and Sustainable Development'. They called upon the International Energy Agency to provide information and advice in a number of areas including special attention to the industrial sector. Tracking Industrial Energy Efficiency and CO2 Emissions responds to the G8 request. This major new analysis shows how industrial energy efficiency has improved dramatically over the last 25 years. Yet important opportunities for additional gains remain, which is evident when the efficiencies of different countries are compared. This analysis identifies the leaders and the laggards. It explains clearly a complex issue for non-experts. With new statistics, groundbreaking methodologies, thorough analysis and advice, and substantial industry consultation, this publication equips decision makers in the public and private sectors with the essential information that is needed to reshape energy use in manufacturing in a more sustainable manner.

Tracking industrial energy efficiency and CO2 emissions

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-06-25

Industry accounts for about one-third of global energy demand. Most of that energy is used to produce raw materials: chemicals, iron and steel, non-metallic minerals, pulp and paper and non-ferrous metals. Just how efficiently is this energy put to work? This question was on the minds of the G8 leaders at their summit in Gleneagles in 2005, when they set a 'Plan of Action for Climate Change, Clean Energy and Sustainable Development'. They called upon the International Energy Agency to provide information and advice in a number of areas including special attention to the industrial sector. Tracking Industrial Energy Efficiency and CO2 Emissions responds to the G8 request. This major new analysis shows how industrial energy efficiency has improved dramatically over the last 25 years. Yet important opportunities for additional gains remain, which is evident when the efficiencies of different countries are compared. This analysis identifies the leaders and the laggards. It explains clearly a complex issue for non-experts. With new statistics, groundbreaking methodologies, thorough analysis and advice, and substantial industry consultation, this publication equips decision makers in the public and private sectors with the essential information that is needed to reshape energy use in manufacturing in a more sustainable manner.

Spatial Assessment of Cancer Incidences and the Risks of Industrial Wastewater Emission in China

Directory of Open Access Journals (Sweden)

Yingru Li

2016-05-01

Full Text Available China’s rapid economic growth and social transitions have deteriorated environmental conditions and caused further public health issues in last three decades. This study examines the complex mechanisms of how socioeconomic transitions and physical environmental conditions impact public health, especially with respect to increasing cancer incidences in mainland China from a spatial-temporal perspective. Specifically, (1 spatial variations of seven types of cancer incidences were analyzed in relation to heavy metal emissions from industrial wastewater at the prefecture-level city scale from 2004 to 2009. Additionally; (2 spatial statistical methods were employed to explore the associations between health outcome, heavy metal emissions from industrial wastewater (arsenic, chromium, cadmium, mercury, lead, as well as socioeconomic transitions (industrialization, urbanization, globalization and physical environmental factors (hydrology and vegetation coverage. Results showed a significant increase of cancer incidences between 2004 and 2009. Consistent with the spatial pattern of heavy metal emissions, cancer patient clusters were identified in both traditional industrial bases and newly industrialized economic zones, especially in major cities located at downstream watersheds, including Beijing, Shanghai, Guangzhou, Shenyang, and Wuhan. The results also revealed the double-edged effects of industrialization, economic growth, and urbanization on natural environment and human health. The findings provide informative knowledge of heavy metal pollution and cancer outbreaks in China and therefore offer valuable reference for authorities formulating regulations.

Methods for decreasing dust emission in the mining chemistry industry

Energy Technology Data Exchange (ETDEWEB)

Gal' perin, V I

1981-01-01

Examination is made of the problems concerning the protection of the atmosphere from pollution caused by dust emission from phosphate enterprises. Presentation is made of the results of tests and industrial assimilation of devices, designed for an increase in the effectiveness of dust catching systems.

Emissions trading for business and industry. A new instrument to achieve environmental goals

International Nuclear Information System (INIS)

2001-05-01

Key components of the Kyoto Protocol are the flexible instruments or mechanisms: namely trading emissions, Joint Implementation and the Clean Development Mechanism. These mechanisms make it possible to trade in CO2 emissions or emission permits, thereby enabling the Kyoto Protocol targets that have been imposed on all states, to be attained in the most cost-effective way. Although the Kyoto targets are binding only on states, it is likely that governments will pass responsibility for meeting them on to specific target groups and impose absolute or relative (energy efficiency or CO2 per unit) targets on them. Flexible instruments, especially Joint Implementation (JI) and the Clean Development Mechanism (CDM), can also be used by companies to achieve their emission targets. Until now, the VNO-NCW Confederation of Netherlands Industry has generally been positive about the use of flexible instruments. However, various developments have persuaded the VNO-NCW that it is a good idea to examine more specific questions with regard to flexible instruments. First, the CO2 trade committee (the Vogtlaender Committee) has been asked to issue recommendations concerning the possibilities inherent in a national system for emissions trading. A basic variant will be explored, in which protected sectors (households, the service industry, small industrial enterprises) will be assigned absolute ceilings and internationally operating companies will be assigned with relative targets. Second, in March 2000 the European Commission published a Green Paper on trade in greenhouse gas emissions within the European Union in order to launch an European Union (EU)-wide debate on the introduction of an EU system for trade in emissions in 2005. In common with the Netherlands, various EU member states are studying the possibilities for phasing in a system of trade in CO2 emissions; only in Denmark has such a system actually been introduced. In industry, too, many initiatives have been taken in

Project management plan : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2010-12-01

The Dallas Integrated Corridor Management System Demonstration Project is a multi-agency, de-centralized operation which will utilize a set of regional systems to integrate the operations of the corridor. The purpose of the Dallas ICM System is to im...

Microstructural characterization of archaeological materials from the Chapatongo-Los Cerritos, Tula, Hidalgo site through Sem and XRD

International Nuclear Information System (INIS)

Rodriguez L, V.; Espinosa P, M.; Fournier, P.

2004-01-01

In one of the main epiclase s establishments of the region of Tula, they have been carried out extensive excavations recently in several sectors. Among the funeral offerings, as well as among the waste materials and recovered in architectural fillers of the place of Chapatongo-Los Cerritos. Diverse stony materials are included stone-beads fundamentally; and they were characterized through Scanning Electron Microscopy (MEB), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (DRX). Morphologies with habits were identified as grooved with great ruggedness that present particles like inclusions of metallic oxides, surfaces with great porosity, lamellar structures, agglomerates, fibers of great extension. Likewise the constituent crystalline phases of the samples were identified: calcite, aragonite, calcium and potassium aluminosilicates, microcline and quartz. In the case of the crystalline phases like omphacite, nacrite and dickite are characteristic of the green stone-beads, these belong to the family of the jadeite phase, considered as precious materials in the pre hispanic world. (Author) 20 refs., 20 tabs., 23 figs

Site-occupany of bats in relation to forested corridors

Science.gov (United States)

Chris D Hein; Steven B Castleberry; Karl V. Miller

2009-01-01

Although use of corridors by some wildlife species has been extensively examined, use by bats is poorly understood. From 1 June to 31 August (2004~200S), we used Anabat II detectors to examine bat activity and species occupancy relative to forested corridors on an intensively managed forest landscape in southern South Carolina, USA. We...

20th-century industrial black carbon emissions altered Arctic climate forcing.

Science.gov (United States)

McConnell, Joseph R; Edwards, Ross; Kok, Gregory L; Flanner, Mark G; Zender, Charles S; Saltzman, Eric S; Banta, J Ryan; Pasteris, Daniel R; Carter, Megan M; Kahl, Jonathan D W

2007-09-07

Black carbon (BC) from biomass and fossil fuel combustion alters chemical and physical properties of the atmosphere and snow albedo, yet little is known about its emission or deposition histories. Measurements of BC, vanillic acid, and non-sea-salt sulfur in ice cores indicate that sources and concentrations of BC in Greenland precipitation varied greatly since 1788 as a result of boreal forest fires and industrial activities. Beginning about 1850, industrial emissions resulted in a sevenfold increase in ice-core BC concentrations, with most change occurring in winter. BC concentrations after about 1951 were lower but increasing. At its maximum from 1906 to 1910, estimated surface climate forcing in early summer from BC in Arctic snow was about 3 watts per square meter, which is eight times the typical preindustrial forcing value.

Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies

International Nuclear Information System (INIS)

Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

1999-01-01

The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications

METHANE EMISSIONS FROM THE NATURAL GAS INDUSTRY VOLUME 15: GAS-ASSISTED GLYCOL PUMPS

Science.gov (United States)

The 15-volume report summarizes the results of a comprehensive program to quantify methane (CH4) emissions from the U.S. natural gas industry for the base year. The objective was to determine CH4 emissions from the wellhead and ending downstream at the customer's meter. The accur...

Perceptions of transport corridors and intermodal transport - as ways to control the space of freight transport flows

DEFF Research Database (Denmark)

Hansen, Leif Gjesing

2009-01-01

This paper presents empirical findings and results from a study conducted as a part of an INTERREG IIIB project on intermodal transport solutions and corridors in the North Sea Region (SUTRANET - Sustainable Transport Research & Development Network in the North Sea Region (Hansen et.al., 2007......; Kristiansen et.al., 2005 and http://www.sutranet.org/ ). The aim of the study has been to explore possibilities and barriers for the development of intermodal transport solutions in selected corridors in the North Sea Region. The North Sea Region is one among several regions appointed by the EU......-Commission to exemplify the operationalisation of the concept Motorways of the Sea (European Commission, 2004). The policies of promoting Motorways of the Sea is aiming at revitalise the short-sea-shipping within Europe as a transport industry, but also to relieve the heavily congested road network in central regions...

Methodology for Collision Risk Assessment of an Airspace Flow Corridor Concept

Science.gov (United States)

Zhang, Yimin

This dissertation presents a methodology to estimate the collision risk associated with a future air-transportation concept called the flow corridor. The flow corridor is a Next Generation Air Transportation System (NextGen) concept to reduce congestion and increase throughput in en-route airspace. The flow corridor has the potential to increase throughput by reducing the controller workload required to manage aircraft outside the corridor and by reducing separation of aircraft within corridor. The analysis in this dissertation is a starting point for the safety analysis required by the Federal Aviation Administration (FAA) to eventually approve and implement the corridor concept. This dissertation develops a hybrid risk analysis methodology that combines Monte Carlo simulation with dynamic event tree analysis. The analysis captures the unique characteristics of the flow corridor concept, including self-separation within the corridor, lane change maneuvers, speed adjustments, and the automated separation assurance system. Monte Carlo simulation is used to model the movement of aircraft in the flow corridor and to identify precursor events that might lead to a collision. Since these precursor events are not rare, standard Monte Carlo simulation can be used to estimate these occurrence rates. Dynamic event trees are then used to model the subsequent series of events that may lead to collision. When two aircraft are on course for a near-mid-air collision (NMAC), the on-board automated separation assurance system provides a series of safety layers to prevent the impending NNAC or collision. Dynamic event trees are used to evaluate the potential failures of these layers in order to estimate the rare-event collision probabilities. The results show that the throughput can be increased by reducing separation to 2 nautical miles while maintaining the current level of safety. A sensitivity analysis shows that the most critical parameters in the model related to the overall

Mapping mountain torrent hazards in the Hexi Corridor using an evidential reasoning approach

Science.gov (United States)

Ran, Youhua; Liu, Jinpeng; Tian, Feng; Wang, Dekai

2017-02-01

The Hexi Corridor is an important part of the Silk Road Economic Belt and a crucial channel for westward development in China. Many important national engineering projects pass through the corridor, such as highways, railways, and the West-to-East Gas Pipeline. The frequent torrent disasters greatly impact the security of infrastructure and human safety. In this study, an evidential reasoning approach based on Dempster-Shafer theory is proposed for mapping mountain torrent hazards in the Hexi Corridor. A torrent hazard map for the Hexi Corridor was generated by integrating the driving factors of mountain torrent disasters including precipitation, terrain, flow concentration processes, and the vegetation fraction. The results show that the capability of the proposed method is satisfactory. The torrent hazard map shows that there is high potential torrent hazard in the central and southeastern Hexi Corridor. The results are useful for engineering planning support and resource protection in the Hexi Corridor. Further efforts are discussed for improving torrent hazard mapping and prediction.

Collision risk-capacity tradeoff analysis of an en-route corridor model

Directory of Open Access Journals (Sweden)

Ye Bojia

2014-02-01

Full Text Available Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities, and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.

What is The Role of Land Value in The Urban Corridor?

Science.gov (United States)

Rakhmatulloh, A. R.; Buchori, I.; Pradoto, W.; Riyanto, B.; Winarendri, J.

2018-02-01

The high movement causes traffic congestion and indicates high movement intensity along the corridor. The higher attraction of the land use will encourage the higher attraction of movement and economic values in the location. This attraction is also affected by the high mobility in the corridor supported by available transport infrastructure. Thus this causes land values become increase significantly. Land use along the corridor can be seen as commercial function because this activity is able to survive in the premium location. The purpose of this research is to identify the effect of land use change toward land values in the commercial corridor. This research used positivistic method with descriptive analysis. The result shows that the land values change in commercial use in the corridor has different pattern of land use change pattern according to physical condition and land use which causes highly economic attraction. The new commercial land is influenced by the distance to city centre or CBD (Central Business District). Land use and public facilities that have local and city scope services do not give the significant impact to land values change.

Mapping urban porosity and roughness characteristics as a mean of defining urban ventilation corridors

Science.gov (United States)

Wicht, Marzena; Wicht, Andreas; Osińska-Skotak, Katarzyna

2017-10-01

Cities can be characterized with the roughest aerodynamic boundaries, which results in the enhanced turbulent motion and increased drag effect. This leads to reduced wind speeds and directly increases negative effects of living within urban areas. Urban Heat Island, decreased air quality or densely built-up residential/industrial areas occur in many cities, both in temperate and tropical regions, and are included in these negative effects. This case study investigates Warsaw, the capital of Poland, representing a dense, urban environment, located in the temperate zone. It suffers from immense air pollution levels, as well as Urban Heat Island, and the local government is seeking ways to resolve these issues. Among many mitigation techniques, air restoration and exchange system were suggested as appropriate measures, as they address many of the aforementioned issues. The essential elements of such system are ventilation corridors. This paper describes mapping these corridors utilizing the morphometric methods of urban roughness aided by remote sensing data. We focus especially on the terrain topology and texture of single elements, including high vegetation canopy layer. This study considers DSM and different porosity of obstacles, deriving a new outlook at the morphometric methods as a way to improve them. The mapped areas of low roughness characteristics might be appointed as ventilation corridors and play a crucial role in air restoration and exchange system. They may also be included in further planning processes by the local government as preservation areas.

Comprehensive development of industrial symbiosis for the response of greenhouse gases emission mitigation: Challenges and opportunities in China

International Nuclear Information System (INIS)

Liu, Zhe; Adams, Michelle; Cote, Raymond P.; Geng, Yong; Chen, Qinghua; Liu, Weili; Sun, Lu; Yu, Xiaoman

2017-01-01

Although not yet a global consensus, there is widespread agreement that climate change is the result of anthropogenic sources of greenhouse gases (GHG) emissions. In order to respond to this issue, society has applied such strategies as clean energy development, improving industrial resource efficiency etc. Despite this, GHG emissions are still pursuing an upward trend. As the largest global GHG emitter, China faces a considerable challenge in responding to its agreed target of 40–45% GHG emission mitigation per unit gross domestic production (GDP) by 2020 as compared to 2005 levels. How to practically achieve this is still largely undecided. Comprehensive development of industrial symbiosis around nationwide is considered part of the solution. However, few researchers have studied how to actually implement a comprehensive development of industrial symbiosis for the purpose of GHG emission mitigation. This work intends to address this gap through highlighting the opportunities to develop such an approach for particular application to GHG emissions reduction in China. In addition, this study will also address the challenges ahead associated with the implementation of such a strategy, and outlines the where future research could be focused. Policy implications like establishing industrial symbiosis indicators associated with GHG emission mitigation are proposed. - Highlights: • Urgent issue of GHG mitigation and background of industrial symbiosis are introduced. • The challenges like lack of indicator, investigating methodologies and regional disparity are analyzed. • Opportunities for GHG mitigation through comprehensive development of industrial symbiosis are detailed. • Policy implications for responding GHG mitigation through industrial symbiosis are proposed.

EU energy-intensive industries and emissions trading: losers becoming winners?

Energy Technology Data Exchange (ETDEWEB)

Wettestad, Joergen

2008-11-15

The EU Emissions Trading System (ETS) initially treated power producers and energy-intensive industries similarly, despite clear structural differences between these industries regarding pass through of costs and vulnerability to global competition. Hence, the energy-intensive industries could be seen as losing out in the internal distribution. In the January 2008 proposal for a reformed ETS post-2012, a differentiated system was proposed where the energy-intensive industries come out relatively much better. What is the explanation for the change taking place? Although power producers still have a dominant position in the system, the increasing consensus about windfall profits has weakened their standing. Conversely, the energy-intensive industries have become better organised and more active. This balance shift is first and foremost noticeable in several important EU-level stake holder consultation processes. Energy-intensive industries have, however, also successfully utilised the national pathway to exert influence on Brussels policy-making. Finally, growing fear of lax global climate policies and related carbon leakage has strengthened the case of these industries further. The latter dimension indicates that although energy-intensive industries have managed to reduce internal distribution anomalies, external challenges remain. (author). 9 refs

Climate change and sea ice: Shipping accessibility on the marine transportation corridor through Hudson Bay and Hudson Strait (1980–2014

Directory of Open Access Journals (Sweden)

Jonathan Andrews

2017-03-01

Full Text Available Shipping traffic has been increasing in Hudson Strait and Hudson Bay and the shipping route through these waters to the Port of Churchill may soon become a federally-designated transportation corridor. A dataset on passive microwave-based sea ice concentration was used to characterize the timing of the ice on the shipping corridor to the Port between 1980 and 2014. Efforts were made to produce results in a readily accessible format for stakeholders of the shipping industry; for example, open water was defined using a sea ice concentration threshold of ≤ 15% and results are presented in terms of real dates instead of anomalies. Between 1980 and 2014, the average breakup date on the corridor was July 4, the average freeze-up date was November 25, and the average length of the open water season was 145 days. However, each of these three variables exhibited significant long-term trends and spatial variability over the 34-year time period. Regression analysis revealed significant linear trends towards earlier breakup (–0.66 days year–1, later freeze-up (+0.52 days year–1, and a longer open water season (+1.14 days year–1 along the shipping corridor between 1980 and 2014. Moreover, the section of the corridor passing through Hudson Strait displayed significantly stronger trends than the two sections in Hudson Bay (i.e., “Hudson Islands” and “Hudson Bay”. As a result, sea ice timing in the Hudson Strait section of the corridor has diverged from the timing in the Hudson Bay sections. For example, the 2010–2014 median length of the open water season was 177 days in Hudson Strait and 153 days in the Hudson Bay sections. Finally, significant linear relationships were observed amongst breakup, freeze-up, and the length of the open water season for all sections of the corridor; correlation analysis suggests that these relationships have greatest impact in Hudson Strait.

Site Outcomes Baseline Multi Year Work Plan Volume 1, River Corridor Restoration Baseline

International Nuclear Information System (INIS)

Wintczak, T.M.

2001-01-01

The River Corridor Restoration volume is a compilation of Hanford Site scope, which excludes the approximately 194 km 2 Central Plateau. The River Corridor scope is currently contractually assigned to Fluor Hanford, Bechtel Hanford, inc., DynCorp, and Pacific Northwest National Laboratory, and others. The purpose of this project specification is to provide an overall scoping document for the River Corridor Restoration volume, and to provide a link with the overall Hanford Site River Corridor scope. Additionally, this specification provides an integrated and consolidated source of information for the various scopes, by current contract, for the River Corridor Restoration Baseline. It identifies the vision, mission, and goals, as well as the operational history of the Hanford Site, along with environmental setting and hazards

Comparing projections of industrial energy demand and greenhouse gas emissions in long-term energy models

NARCIS (Netherlands)

Edelenbosch, O. Y.|info:eu-repo/dai/nl/412493373; Kermeli, K.|info:eu-repo/dai/nl/411260553; Crijns-Graus, W.|info:eu-repo/dai/nl/308005015; Worrell, E.|info:eu-repo/dai/nl/106856715; Bibas, R.; Fais, B.; Fujimori, S.; Kyle, P.; Sano, F.; van Vuuren, Detlef|info:eu-repo/dai/nl/11522016X

2017-01-01

The industry sector is a major energy consumer and GHG emitter. Effective climate change mitigation strategies will require a significant reduction of industrial emissions. To better understand the variations in the projected industrial pathways for both baseline and mitigation scenarios, we compare

Model for calculating regional energy use, industrial production and greenhouse gas emissions for evaluating global climate scenarios

International Nuclear Information System (INIS)

Vries, H.J.M. de; Olivier, J.G.J.; Wijngaart, R.A. van den; Kreileman, G.J.J.; Toet, A.M.C.

1994-01-01

In the integrated IMAGE 2.0 model the 'Energy-Industry System' is implemented as a set of models to develop global scenarios for energy use and industrial processes and for the related emissions of greenhouse gases on a region specific basis. The Energy-Economy model computes total energy use, with a focus on final energy consumption in end-use sectors, based on economic activity levels and the energy conservation potential (end-use approach). The Industrial Production and Consumption model computes the future levels of activities other than energy use, which lead to greenhouse gas emissions, based on relations with activities defined in the Energy-Economy model. These two models are complemented by two emissions models, to compute the associated emissions by using emission factors per compound and per activity defined. For investigating energy conservation and emissions control strategy scenarios various techno-economic coefficients in the model can be modified. In this paper the methodology and implementation of the 'Energy-Industry System' models is described as well as results from their testing against data for the period 1970-1990. In addition, the application of the models is presented for a specific scenario calculation. Future extensions of the models are in preparation. 59 refs., 17 figs., 21 tabs

Long-term results of the corridor operation for atrial fibrillation

NARCIS (Netherlands)

van Hemel, N. M.; Defauw, J. J.; Kingma, J. H.; Jaarsma, W.; Vermeulen, F. E.; de Bakker, J. M.; Guiraudon, G. M.

1994-01-01

To investigate the long-term results of the corridor operation in the treatment of symptomatic atrial fibrillation refractory to drug treatment. The corridor operation is designed to isolate from the left and right atrium a conduit of atrial tissue connecting the sinus node area with the

Problems of protection of urban ambient air pollution from industrial dust emissions

Directory of Open Access Journals (Sweden)

Azarov Valeriy

2017-01-01

Full Text Available The development of large cities accompanied by the development of the industry hashistorically led to the fact that now residential areas are located side by side with the industrial production. For instance, exactly this situation has developed in the city of Volgograd, as well as in other Russian cities, where sometimes the distance from large enterprises to a living area is 100 m or less. In addition, small-scale entrepreneurs usually place their production directly in their past places of residence. As a result, the content of harmful substances in the air of city blocks is much higher than the standards of hygiene require. It is obvious that the current situation can be improved through the use of modern, more advanced technologies. However, increasing the efficiency of air systems to protect the city from pollution and industrial emissions is an urgent task. The authors propose a version of the system layout, designed to reduce dust emissions in urban air.

The Probability of Tax Charges for Industrial Emission of Carbon Dioxide

International Nuclear Information System (INIS)

Arief-Goeritno

2000-01-01

Generally, although all industrial by product can be toxic and non-toxic pollutant that have potential hazard for human being and environmental. One of these pollutants is carbon dioxide that has potential contribution for greenhouse effect. Although carbon dioxide can be absorbed by plants at the forest but quantity of this emission more higher than quantity of forest area. For this reason rehabilitation of the forest and diversifications and energy saving can be used for decreasing of greenhouse effect. The synergy action such as economical instrumentation (specially microeconomics) can be implemented base on regulators, taxing and incentive and effluent charge by deeper assessment on environmental economics. By identification of quality and quantity fossil fuels that was burned in the industrial process so with stoichiometry calculation will be found quantity of carbon dioxide emission and the taxes can be estimated. (author)

Inventory and Policy Reduction Potential of Greenhouse Gas and Pollutant Emissions of Road Transportation Industry in China

Directory of Open Access Journals (Sweden)

Ye Li

2016-11-01

Full Text Available In recent years, emissions from the road transportation industry in China have been increasing rapidly. To evaluate the reduction potential of greenhouse gas and pollutant emissions of the industry in China, its emission inventory was calculated and scenario analysis was created for the period between 2012 and 2030 in this paper. Based on the Long-range Energy Alternatives Planning System (LEAP model, the development of China’s road transportation industry in two scenarios (the business-as-usual (BAU scenario and the comprehensive-mitigation (CM scenario was simulated. In the Comprehensive Mitigation scenario, there are nine various measures which include Fuel Economy Standards, Auto Emission Standards, Energy-saving Technology, Tax Policy, Eco-driving, Logistics Informatization, Vehicle Liquidation, Electric Vehicles, and Alternative Fuels. The cumulative energy and emission reductions of these specific measures were evaluated. Our results demonstrate that China’s road transportation produced 881 million metric tons of CO2 and emitted 1420 thousand tons of CO, 2150 thousand tons of NOx, 148 thousand tons of PM10, and 745 thousand tons of HC in 2012. The reduction potential is quite large, and road freight transportation is the key mitigation subsector, accounting for 85%–92% of the total emission. For energy conservation and carbon emission mitigation, logistics informatization is the most effective method, potentially reducing 1.80 billion tons of coal equivalent and 3.83 billion tons of CO2 from 2012 to 2030. In terms of air pollutant emission mitigation, the auto emission standards measure performs best with respect to NOx, PM10, and HC emission mitigation, and logistic informatization measure is the best in CO emission reduction. In order to maximize the mitigation potential of China’s road transportation industry, the government needs to implement various measures in a timely and strict fashion.

Grizzly bears and calving caribou: What is the relation with river corridors?

Science.gov (United States)

Young, Donald D.; McCabe, Thomas R.

1998-01-01

Researchers have debated the effect of the Trans-Alaska Pipeline (TAP) and associated developments to caribou (Rangifer tarandus) of the central Arctic herd (CAH) since the 1970s. Several studies have demonstrated that cows and calves of the CAH avoided the TAP corridor because of disturbance associated with the pipeline, whereas others have indicated that female caribou of the CAH avoided riparian habitats closely associated with the pipeline. This avoidance was explained as a predator-avoidance strategy. We investigated the relation between female caribou and grizzly bear (Ursus arctos) use of river corridors on the yet undisturbed calving grounds of the Porcupine caribou herd (PCH) in northeastern Alaska. On the coastal plain, caribou were closer to river corridors than expected (P = 0.038), but bear use of river corridors did not differ from expected (P = 0.740). In the foothills, caribou use of river corridors did not differ from expected (P = 0.520), but bears were farther from rivers than expected (P = 0.001). Our results did not suggest an avoidance of river corridors by calving caribou or a propensity for bears to be associated with riparian habitats, presumably for stalking or ambush cover. We propose that PCH caribou reduce the risks of predation to neonates by migrating to a common calving grounds, where predator swamping is the operational antipredator strategy. Consequently, we hypothesize that nutritional demands, not predator avoidance strategies, ultimately regulate habitat use patterns (e.g., use of river corridors) of calving PCH caribou.

Comprehensive evaluation of industrial CO{sub 2} emission (1989-2004) in Taiwan by input-output structural decomposition

Energy Technology Data Exchange (ETDEWEB)

Chang, Yih F. [Department of Tourism and Management, Chia-Nan University of Pharmacy and Science, Tainan 717 (China); Lewis, Charles [Department of Resources Engineering, National Cheng Kung University, Tainan 701 (China); Lin, Sue J. [Department of Environmental Engineering, National Cheng Kung University, Tainan 701 (China)

2008-07-15

Taiwan currently emits approximately 1% of the world's CO{sub 2} - ranking it 22nd among nations. Herein, we use the input-output (I-O) structural decomposition method to examine the changes in CO{sub 2} emission over a 15-year period. By decomposing the CO{sub 2} emission changes into nine factors for the periods of 1989-1994, 1994-1999, and 1999-2004, we have identified the key factors causing the emission changes, as well as the most important trends regarding the industrial development process in Taiwan. The 5-year increment with the largest increase of CO{sub 2} emission was that of 1999-2004, due to the rapid increase of electricity consumption. From the decomposition, the industrial energy coefficient and the CO{sub 2} emission factors were identified as the most important parameters for the determination of the highway, petrochemical materials, iron and steel, the commercial sector, and electric machinery as the major sources of increased CO{sub 2} emission during the past 15 years. From 1989 to 2004, the level of exports and the level of domestic final demand were the largest contributors to the increase in the total increment of CO{sub 2} change. During 1989-2004, the industrial energy coefficient and CO{sub 2} emission factors, being minimally significant during 1989-1994, became extremely important, joining the domestic final demand and the level of exports factors as the major causes of the increase increment of CO{sub 2}. This indicates a heavy reliance upon high-energy (and CO{sub 2}) intensity for Taiwanese industries; therefore, continuous efforts to improve energy intensity and fuel mix toward lower carbon are important for CO{sub 2} reduction, especially for the electricity and power generation sectors. Relevant strategies for reducing carbon dioxide emissions from major industries are also highlighted. (author)

System acceptance test plan : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2013-02-01

The Dallas Area Rapid Transit (DART) is leading the US 75 Integrated Corridor Management (ICM) : Demonstration Project for the Dallas region. Coordinated corridor operations and management is : predicated on being able to share transportation informa...

Transportation of Dangerous Goods in Green Transport Corridors - Conclusions from Baltic Sea Region

Directory of Open Access Journals (Sweden)

Schröder Meike

2016-12-01

Full Text Available The Green Corridor concept represents a cornerstone in the development and implementation of integrated and sustainable transport solutions based on trans-nationality, multi-modality and a high involvement of public and private stakeholders, including the political level. Despite the fact that the Green Transport Corridor (GTC concept is founded on the three dimensions of sustainability with a strong emphasis on environmental aspects, the corridor hubs as well as the whole transport corridors have to find ways to handle and transport dangerous goods by keeping the high sustainability standards.

Co-controlling CO2 and NOx emission in China's cement industry: An optimal development pathway study

Directory of Open Access Journals (Sweden)

Xiang-Zhao Feng

2018-03-01

Full Text Available It is of important practical significance to reduce NOx emission and CO2 emission in China's cement industry. This paper firstly identifies key factors that influence China's future cement demand, and then uses the Gompertz model to project China's future cement demand and production. Furthermore, the multi-pollutant abatement planning model (MAP was developed based on the TIMES model to analyze the co-benefits of CO2 and NOx control in China's cement industry. During modeling analysis, three scenarios such as basic as usual scenario (BAU, moderately low carbon scenario (MLC, and radically low carbon scenario (RLC, were built according to different policy constraints and emission control goals. Moreover, the benefits of co-controlling NOx and CO2 emission in China's cement industry have been estimated. Finally, this paper proposes a cost-efficient, green, and low carbon development roadmap for the Chinese cement sector, and puts forwards countermeasures as follows: first, different ministries should enhance communication and coordination about how to promote the co-control of NOx and CO2 in cement industry. Second, co-control technology list should be issued timely for cement industry, and the R&D investment on new technologies and demonstration projects should be increased. Third, the phase-out of old cement capacity needs to be continued at policy level. Fourth, it is important to scientifically evaluate the relevant environmental impact and adverse motivation of ammonia production by NOx removal requirement in cement industry. Keywords: Cement industry, CO2 abatement, NOx reduction, Co-benefit analysis

Request for Correction 12003 Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

Science.gov (United States)

Request for Correction by the U.S. Chamber of Commerce for information in Greenhouse Gas Emissions Reporting from the Petroleum Gas Industry that regarding methane emissions, volatile organic compounds, and hazardous air pollutants.

Assessment of the impact of the European CO2 emissions trading scheme on the Portuguese chemical industry

International Nuclear Information System (INIS)

Tomas, R.A.F.; Ramoa Ribeiro, F.; Santos, V.M.S.; Gomes, J.F.P.; Bordado, J.C.M.

2010-01-01

This paper describes an assessment of the impact of the enforcement of the European carbon dioxide (CO 2 ) emissions trading scheme on the Portuguese chemical industry, based on cost structure, CO 2 emissions, electricity consumption and allocated allowances data from a survey to four Portuguese representative units of the chemical industry sector, and considering scenarios that allow the estimation of increases on both direct and indirect production costs. These estimated cost increases were also compared with similar data from other European Industries, found in the references and with conclusions from simulation studies. Thus, it was possible to ascertain the impact of buying extra CO 2 emission permits, which could be considered as limited. It was also found that this impact is somewhat lower than the impacts for other industrial sectors.

[Perception and attitude of rural community to the construction of Asian elephant conservation corridors in Xishuangbanna].

Science.gov (United States)

Li, Zheng-Ling; Chen, Ming-Yong; Wu, Zhao-Lu; Wang, Qian; Dong, Yong-Hua

2009-06-01

By using contingent valuation method (CVM), an investigation was made from November 2007 to March 2008 on the perception and attitude of 196 households in 5 villages within 2 planned Asian elephant conservation corridors in Xishuangbanna to the construction of the corridors. 80.61% of the interviewees conditionally supported the corridors construction. The main factors affecting the interviewees' support willingness included their education level, per capita income, and perceptions to Asian elephant protection, human-elephant relations, and corridor utilization patterns and its beneficiaries, among which, the interviewees' awareness of Asian elephant conservation, corridor utilization patterns, and corridor beneficiaries had strong influence on the support willingness, with the correlation coefficient being 0.231, 0.236, and -0.304, respectively. The rural community holding the land tenure played a key role in the corridors construction. To effectively design and planning the construction of biological conservation corridor, it is necessary to have a deep understanding on the perceptions and attitudes of rural community to the construction of the corridor and to obtain their support and participation for this construction.

Generation and Use of Thermal Energy in the U.S. Industrial Sector and Opportunities to Reduce its Carbon Emissions

Energy Technology Data Exchange (ETDEWEB)

McMillan, Colin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center; Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-11-01

The industrial sector was the third-largest source of direct U.S. greenhouse gas (GHG) emissions in 2014 behind electricity generation and transportation and accounted for roughly 20% of total emissions (EPA 2016). The Energy Information Administration (EIA) projects that total U.S. energy consumption will grow to about 108 exajoules (1 EJ = 10¹⁸ J) or 102 quads (1 quad = 10¹⁵ British thermal units) in 2025, with nearly all of the growth coming from the industrial sector (DOE 2015b). Energy consumption in the industrial sector is forecast to increase to 39.5 EJ (37.4 quads)—a 22% increase, exceeding 36% of total energy consumption in the United States. Therefore, it is imperative that industrial GHG emissions be considered in any strategy intent on achieving deep decarbonization of the energy sector as a whole. It is important to note that unlike the transportation sector and electrical grid, energy use by industry often involves direct conversion of primary energy sources to thermal and electrical energy at the point of consumption. About 52% of U.S. industrial direct GHG emissions are the result of fuel combustion (EPA 2016) to produce hot gases and steam for process heating, process reactions, and process evaporation, concentration, and drying. The heterogeneity and variations in scale of U.S. industry and the complexity of modern industrial firms’ global supply chains are among the sector’s unique challenges to minimizing its GHG emissions. A combination of varied strategies—such as energy efficiency, material efficiency, and switching to low-carbon fuels—can help reduce absolute industrial GHG emissions. This report provides a complement to process-efficiency improvement to consider how clean energy delivery and use by industry could reduce GHG emissions. Specifically, it considers the possibility of replacing fossil-fuel combustion in industry with nuclear (specifically small modular reactors [SMRs]), solar thermal (referred to

Regional Ecological Corridors - MLCCS derived 2008

Data.gov (United States)

Minnesota Department of Natural Resources — Identification of potential ecological corridors between the MLCCS derived ecological patches (ear_eco08py3). This was generated using cost / distance analysis,...

ERA Ranger tailings corridor review. Supervising Scientist report 154

International Nuclear Information System (INIS)

Merz, S.K.

2000-01-01

Sinclair Knight Merz (SKM) were commissioned by the Office of the Supervising Scientist on 25 May 2000 to undertake a review and complete a report on the tailings corridor at the ERA Ranger Mine. The objective of the study was to undertake an 'as is' and to some extent historic and look ahead, review of the corridor system sufficient to: assess the current suitability of key aspects of the design; assess the suitability of current operating, maintenance and system development regimes and responsibilities; and record any recommended actions or further investigations arising out of the review; in order to ensure the adequacy of the design, operation and maintenance. The scope of the study report was limited to the corridor itself, its associated sump and sump contents discharge and the branch corridors carrying pipelines to Pit 1. A representative report contents was discussed and agreed with the Office of the Supervising Scientist prior to commencement of the study and this is included as appendix A to this report. The originally agreed content is, with only minor amendment, reflected in this report. The study methodology comprised a review and assessment by SKM of the design of the existing system and current operations documentation and information obtained from investigations on site and discussions with ERA site personnel. Whilst, a number of modifications affecting the corridor are recommended for further consideration, the main findings of the report relate to operating and maintenance practices which should be adopted for the remainder of the mine/mill life

A competitive carbon emissions scheme with hybrid fiscal incentives: The evidence from a taxi industry

International Nuclear Information System (INIS)

Liu, Yang; Han, Liyan; Yin, Ziqiao; Luo, Kongyi

2017-01-01

As two major approaches to reduce carbon emissions, command-and-control instruments and market-based carbon trading systems have their own weaknesses. Our paper first proposes a type of endogenous equilibrium methodology to dynamically derive the industrial carbon emissions standards. At the equilibrium, the sum of all carbon assets and liabilities is zero in the considered industry. Moreover, the standards fall over time with low-carbon technological advance. Most importantly, combining Pigou's and Coase's ideas, we construct a fiscal instrument accounting for both carbon taxes and allowances based on the dynamically improved emissions standards and carbon trading prices. This “No revenue for government” method implements a self-operated ecology for carbon trading market. Finally, considering the “Waterloo” recession of carbon prices, we introduce an adjustment factor into the model, which generates a negative-feedback mechanism with carbon prices. To support our idea, we present the application to Beijing taxi industry in detail and raise relative policy implications based on the evidence. - Highlights: • Dynamic endogenous equilibrium standards for carbon emissions. • A public policy oriented market mechanism combining command-and-control instruments and carbon trading. • Hybrid incentives to emission reduction combining carbon taxes and allowances. • The adjustment coefficient generating a negative feedback mechanism with carbon prices.

76 FR 29290 - Environmental Impact Statement: Interstate 64 Hampton Roads Bridge Tunnel Corridor, Virginia

Science.gov (United States)

2011-05-20

...: Interstate 64 Hampton Roads Bridge Tunnel Corridor, Virginia AGENCY: Federal Highway Administration (FHWA... Interstate 64 Hampton Roads Bridge Tunnel (HRBT) corridor in Virginia. FOR FURTHER INFORMATION CONTACT... Interstate 64 Hampton Roads Bridge Tunnel (HRBT) corridor in Virginia. The approximate limits of the study...

A STRATEGIC PROGRAM TO REDUCE GREENHOUSE GASES EMISSIONS PRODUCED FROM FOOD INDUSTRY

Energy Technology Data Exchange (ETDEWEB)

A. Kilic [Faculty of Science, Department of Biology, University of Nigde, Nigde (Turkey); A. Midilli [Faculty of Engineering, Department of Mechanical Engineering, Nigde (Turkey); I. Dincer [Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, Oshawa, ON (Canada)

2008-09-30

Greenhouse gases (GHGs) emissions are at every stage of conventional food production (planting, harvesting, irrigation, food production, transportation, and application of pesticides and fertilizers, etc.). In this study, a strategic program is proposed to reduce GHGs emissions resulting during conventional food production. The factors which form the basis of this strategic program are energy, environment and sustainability. The results show that the application of sustainable food processing technologies can significantly reduce GHGs emissions resulting from food industry. Moreover, minimizing the utilization of fossil-fuel energy sources and maximizing the utilization of renewable energy sources results in the reduction of GHGs emissions during food production, which in turn reduces the effect of global warming.

End-user GHG emissions from energy. Reallocation of emissions from energy industries to end users 2005-2009

Energy Technology Data Exchange (ETDEWEB)

Fernandez, R. (European Environment Agency (EEA), Copenhagen (Denmark)); Watterson, J. (AEA Technology plc - EEA' s European Topic Centre on Air Pollution and Climate Change Mitigation (ETC/ACM) (United Kingdom))

2011-12-15

The objective of this report is to help improve the understanding of past greenhouse gas (GHG) emission trends in the energy sector from the demand or end-user side. To do this, the report develops a methodology to redistributes emissions from energy industries to the final users (by sector) of that energy. This reallocation is done on the basis of Eurostat's energy balances and GHG inventories for the energy sector as reported to the United Nations Framework Convention on Climate Change (UNFCCC), for the period 2005-2009. (Author)

End-user GHG emissions from energy. Reallocation of emissions from energy industries to end users 2005-2010

Energy Technology Data Exchange (ETDEWEB)

Fernandez, R. [European Environment Agency (EEA), Copenhagen (Denmark); Watterson, J. [AEA Technology plc - EEA' s European Topic Centre on Air Pollution and Climate Change Mitigation (ETC/ACM) (United Kingdom)

2012-12-15

The objective of this report is to help improve the understanding of past GHG emission trends in the energy sector from the demand or end-user side. To do this, the report develops a methodology to redistributes emissions from energy industries to the final users (by sector) of that energy. This reallocation is done on the basis of Eurostat's energy balances and GHG inventories for the energy sector as reported to the United Nations Framework Convention on Climate Change (UNFCCC), for the period 2005-2010. (Author)

[Emission characteristics of PM10 from coal-fired industrial boiler].

Science.gov (United States)

Li, Chao; Li, Xing-Hua; Duan, Lei; Zhao, Meng; Duan, Jing-Chun; Hao, Ji-Ming

2009-03-15

Through ELPI (electrical low-pressure impactor) based dilution sampling system, the emission characteristics of PM10 and PM2.5 was studied experimentally at the inlet and outlet of dust catchers at eight different coal-fired industrial boilers. Results showed that a peak existed at around 0.12-0.20 microm of particle size for both number size distribution and mass size distribution of PM10 emitted from most of the boilers. Chemical composition analysis indicated that PM2.5 was largely composed of organic carbon, elementary carbon, and sulfate, with mass fraction of 3.7%-21.4%, 4.2%-24.6%, and 1.5%-55.2% respectively. Emission factors of PM10 and PM2.5 measured were 0.13-0.65 kg x t(-1) and 0.08-0.49 kg x t(-1) respectively for grate boiler using raw coal, and 0.24 kg x t(-1) and 0.22 kg x t(-1) for chain-grate boiler using briquette. In comparison, the PM2.5 emission factor of fluidized bed boiler is 1.14 kg x t(-1), much her than that of grate boiler. Due to high coal consumption and low efficiency of dust separator, coal-fired industrial boiler may become the most important source of PM10, and should be preferentially controlled in China.

Assessment of Dust Emission and Working Conditions in the Bamboo and Wooden Furniture Industries in Malaysia

Directory of Open Access Journals (Sweden)

Jegatheswaran Ratnasingam

2015-12-01

Full Text Available A study was carried out to assess the dust emission and working conditions in the bamboo and rubberwood furniture manufacturing industries in Malaysia. The emission of wood dust arising from these industries was measured in each main work station in the mills. Meanwhile, a questionnaire-based survey was conducted among 5900 workers in 45 companies to obtain information on the occupational accidents that occurred in the mills. The data were collected, compiled, and analyzed using the SPSS package. The highest dust emission from the sanding operation resulted in respiratory ailments among workers. The occurrence of injuries particularly to the hand, wrist, fingers and forearm was due to the prevailing working conditions, safety climate and workers characteristics. The dust exposure levels and working conditions were much more severe in the bamboo furniture manufacturing industry. As a result, a review of existing of dust exposure levels in the woodworking industry is warranted.

Temporal trends and spatial variation characteristics of primary air pollutants emissions from coal-fired industrial boilers in Beijing, China

International Nuclear Information System (INIS)

Xue, Yifeng; Tian, Hezhong; Yan, Jing; Zhou, Zhen; Wang, Junling; Nie, Lei; Pan, Tao; Zhou, Junrui; Hua, Shenbing; Wang, Yong; Wu, Xiaoqing

2016-01-01

Coal-fired combustion is recognized as a significant anthropogenic source of atmospheric compounds in Beijing, causing heavy air pollution events and associated deterioration in visibility. Obtaining an accurate understanding of the temporal trends and spatial variation characteristics of emissions from coal-fired industrial combustion is essential for predicting air quality changes and evaluating the effectiveness of current control measures. In this study, an integrated emission inventory of primary air pollutants emitted from coal-fired industrial boilers in Beijing is developed for the period of 2007–2013 using a technology-based approach. Future emission trends are projected through 2030 based on current energy-related and emission control policies. Our analysis shows that there is a general downward trend in primary air pollutants emissions because of the implementation of stricter local emission standards and the promotion by the Beijing municipal government of converting from coal-fired industrial boilers to gas-fired boilers. However, the ratio of coal consumed by industrial boilers to total coal consumption has been increasing, raising concerns about the further improvement of air quality in Beijing. Our estimates indicate that the total emissions of PM 10 , PM 2.5 , SO 2 , NO x , CO and VOCs from coal-fired industrial boilers in Beijing in 2013 are approximately 19,242 t, 13,345 t, 26,615 t, 22,965 t, 63,779 t and 1406 t, respectively. Under the current environmental policies and relevant energy savings and emission control plans, it may be possible to reduce NO x and other air pollutant emissions by 94% and 90% by 2030, respectively, if advanced flue gas purification technologies are implemented and coal is replaced with natural gas in the majority of existing boilers. - Highlights: • A unit-based emission inventory of coal-fired industrial boilers is developed. • Temporal trend of historical period 2007–2013 and the future till 2030 is

Technologies for utilization of industrial excess heat: Potentials for energy recovery and CO2 emission reduction

International Nuclear Information System (INIS)

Broberg Viklund, Sarah; Johansson, Maria T.

2014-01-01

Highlights: • Technologies for recovery and use of industrial excess heat were investigated. • Heat harvesting, heat storage, heat utilization, and heat conversion technologies. • Heat recovery potential for Gävleborg County in Sweden was calculated. • Effects on global CO 2 emissions were calculated for future energy market scenarios. - Abstract: Industrial excess heat is a large untapped resource, for which there is potential for external use, which would create benefits for industry and society. Use of excess heat can provide a way to reduce the use of primary energy and to contribute to global CO 2 mitigation. The aim of this paper is to present different measures for the recovery and utilization of industrial excess heat and to investigate how the development of the future energy market can affect which heat utilization measure would contribute the most to global CO 2 emissions mitigation. Excess heat recovery is put into a context by applying some of the excess heat recovery measures to the untapped excess heat potential in Gävleborg County in Sweden. Two different cases for excess heat recovery are studied: heat delivery to a district heating system and heat-driven electricity generation. To investigate the impact of excess heat recovery on global CO 2 emissions, six consistent future energy market scenarios were used. Approximately 0.8 TWh/year of industrial excess heat in Gävleborg County is not used today. The results show that with the proposed recovery measures approximately 91 GWh/year of district heating, or 25 GWh/year of electricity, could be supplied from this heat. Electricity generation would result in reduced global CO 2 emissions in all of the analyzed scenarios, while heat delivery to a DH system based on combined heat and power production from biomass would result in increased global CO 2 emissions when the CO 2 emission charge is low

Simulation Study of Single Photon Emission Computed Tomography for Industrial Applications

International Nuclear Information System (INIS)

Roy, Tushar; Sarkar, P. S.; Sinha, Amar

2008-01-01

SPECT (Single Photon Emission Computed Tomography) provides for an invaluable non-invasive technique for the characterization and activity distribution of the gamma-emitting source. For many applications of radioisotopes for medical and industrial application, not only the positional information of the distribution of radioisotopes is needed but also its strength. The well-established X-ray radiography or transmission tomography techniques do not yield sufficient quantitative information about these objects. Emission tomography is one of the important methods for such characterization. Application of parallel beam, fan beam and 3D cone beam emission tomography methods have been discussed in this paper. Simulation studies to test these algorithms have been carried out to validate the technique.

Development of a United States-Mexico Emissions Inventory for the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study.

Science.gov (United States)

Kuhns, Hampden; Knipping, Eladio M; Vukovich, Jeffrey M

2005-05-01

The Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study was commissioned to investigate the sources of haze at Big Bend National Park in southwest Texas. The modeling domain of the BRAVO Study includes most of the continental United States and Mexico. The BRAVO emissions inventory was constructed from the 1999 National Emission Inventory for the United States, modified to include finer-resolution data for Texas and 13 U.S. states in close proximity. The first regional-scale Mexican emissions inventory designed for air-quality modeling applications was developed for 10 northern Mexican states, the Tula Industrial Park in the state of Hidalgo, and the Popocatépetl volcano in the state of Puebla. Emissions data were compiled from numerous sources, including the U.S. Environmental Protection Agency (EPA), the Texas Natural Resources Conservation Commission (now Texas Commission on Environmental Quality), the Eastern Research Group, the Minerals Management Service, the Instituto Nacional de Ecología, and the Instituto Nacional de Estadistica Geografía y Informática. The inventory includes emissions for CO, nitrogen oxides, sulfur dioxide, volatile organic compounds (VOCs), ammonia, particulate matter (PM) < 10 microm in aerodynamic diameter, and PM < 2.5 microm in aerodynamic diameter. Wind-blown dust and biomass burning were not included in the inventory, although high concentrations of dust and organic PM attributed to biomass burning have been observed at Big Bend National Park. The SMOKE modeling system was used to generate gridded emissions fields for use with the Regional Modeling System for Aerosols and Deposition (REMSAD) and the Community Multiscale Air Quality model modified with the Model of Aerosol Dynamics, Reaction, Ionization and Dissolution (CMAQ-MADRID). The compilation of the inventory, supporting model input data, and issues encountered during the development of the inventory are documented. A comparison of the BRAVO emissions

An emissions trading scheme design for power industries facing price regulation

International Nuclear Information System (INIS)

Kim, Yong-Gun; Lim, Jong-Soo

2014-01-01

The electricity market, monopolistic in nature, with government price regulation, poses a serious challenge for policy makers with respect to the cost-effectiveness of emissions trading, particularly in Asian countries. This paper argues that a cap-and-trade regulatory system for indirect emissions combined with a rate-based allocation system for direct emissions can achieve market efficiency even in the presence of price and quantity controls in the electricity market. This particular policy mix could provide appropriate incentives for industries to reduce their electricity consumption while inducing power producers to reduce their direct carbon emissions cost-effectively in conditions where there is strict government control of electricity prices. Another advantage of the suggested policy mix is that it allows carbon leakage in cross-border power trades to be effectively eliminated. - Highlights: • A rate-based allocation induces power producers to minimize direct emissions. • A cap-and-trade on indirect emission induces firms to reduce electricity consumption. • These two can jointly achieve market efficiency even in the regulated power market

Monitoring of fogwater chemistry in the gulf coast urban industrial corridor: Baton Rouge (louisiana).

Science.gov (United States)

Raja, S; Ravikrishna, R; Kommalapati, R R; Valsaraj, K T

2005-11-01

Seventeen fog events were sampled in Baton Rouge, Louisiana during 2002-2004 as part of characterizing wet deposition by fogwater in the heavily industrialized corridor along the Louisiana Gulf Coast in the United States. These samples were analyzed for chemical characteristics such as pH, conductivity, total organic and inorganic carbon, total metals and the principal ion concentrations. The dominant ionic species in all samples were NH4+, NO3-, Cl- and SO4(2-). The pH of the fogwater sampled had a mean value of 6.7 with two cases of acidic pH of 4.7. Rainwater and fogwater pH were similar in this region. The acidity of fogwater was a result of NO3- but partly offset by high NH4+. The measured gaseous SO2 accounted for a small percentage of the observed sulfate concentration, indicating additional gas-to-particle conversion of SO2 to sulfate in fogwater. The gaseous NOx accounted for most of the dissolved nitrate and nitrite concentration in fogwater. The high chloride concentration was attributable to the degradation of chlorinated organics in the atmosphere. The metal composition was traced directly to soil-derived aerosol precursors in the air. The major metals observed in fogwater were Na, K, Ca, Fe, Al, Mg and Zn. Of these Na, K, Ca and Mg were predominant with mean concentrations > 100 microM. Al, Fe and Zn were present in the samples, at mean concentrations fogwaters, and these were shown to result from particulates (PM2.5) in the atmosphere. The contribution to both ions and metals from the marine sources in the Louisiana Gulf Coast was minimal. The concentrations of all principal ionic species and metals in fogwater were 1-2 orders of magnitude larger than in rainwater. Several linear alkane organic compounds were observed in the fogwater, representing the contributions from petroleum products at concentrations far exceeding their aqueous solubility. A pesticide (atrazine) was also observed in fogwater, representing the contribution from the agricultural

Reduction of emissions and geological storage of CO2. Innovation an industrial stakes

International Nuclear Information System (INIS)

Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B.

2005-01-01

An international symposium on the reduction of emissions and geological storage of CO 2 was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO 2 emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO 2 and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO 2 emissions. The global and regional scenarios: Alternative scenarios for energy use and CO 2 emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO 2 emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO 2 emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO 2 capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO 2 emission reductions in the energy and transport sectors. Reducing CO 2 emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO 2 emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO 2 emissions in the transport sector: Sustainable transport systems by P. Wiederkehr (EST International), The prospects for reducing

Decomposition of toxicity emission changes on the demand and supply sides: empirical study of the US industrial sector

Science.gov (United States)

Fujii, Hidemichi; Okamoto, Shunsuke; Kagawa, Shigemi; Managi, Shunsuke

2017-12-01

This study investigated the changes in the toxicity of chemical emissions from the US industrial sector over the 1998-2009 period. Specifically, we employed a multiregional input-output analysis framework and integrated a supply-side index decomposition analysis (IDA) with a demand-side structural decomposition analysis (SDA) to clarify the main drivers of changes in the toxicity of production- and consumption-based chemical emissions. The results showed that toxic emissions from the US industrial sector decreased by 83% over the studied period because of pollution abatement efforts adopted by US industries. A variety of pollution abatement efforts were used by different industries, and cleaner production in the mining sector and the use of alternative materials in the manufacture of transportation equipment represented the most important efforts.

China Pakistan Economic Corridor (CPEC): Benefits For Pakistan And Comparison With Suez And Panama Canals

Science.gov (United States)

2017-12-01

ECONOMIC CORRIDOR (CPEC): BENEFITS FOR PAKISTAN AND COMPARISON WITH SUEZ AND PANAMA CANALS by Hanif Ullah Khan December 2017 Thesis...DATE December 2017 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE CHINA PAKISTAN ECONOMIC CORRIDOR (CPEC): BENEFITS FOR...The China Pakistan Economic Corridor (CPEC) is part of China’s “One Belt, One Road” initiative and joins two major economic corridors: The Silk Road

Identifying key factors and strategies for reducing industrial CO2 emissions from a non-Kyoto protocol member's (Taiwan) perspective

International Nuclear Information System (INIS)

Lin, Sue J.; Lu, I.J.; Lewis, Charles

2006-01-01

In this study we use Divisia index approach to identify key factors affecting CO 2 emission changes of industrial sectors in Taiwan. The changes of CO 2 emission are decomposed into emission coefficient, energy intensity, industrial structure and economic growth. Furthermore, comparisons with USA, Japan, Germany, the Netherlands and South Korea are made to have a better understanding of emission tendency in these countries and to help formulate our CO 2 reduction strategies for responding to the international calls for CO 2 cuts. The results show that economic growth and high energy intensity were two key factors for the rapid increase of industrial CO 2 emission in Taiwan, while adjustment of industrial structure was the main component for the decrease. Although economic development is important, Taiwan must keep pace with the international trends for CO 2 reduction. Among the most important strategies are continuous efforts to improve energy intensity, fuel mix toward lower carbon, setting targets for industrial CO 2 cuts, and advancing green technology through technology transfer. Also, the clean development mechanism (CDM) is expected to play an important role in the future

Exergetic assessment for resources input and environmental emissions by Chinese industry during 1997-2006.

Science.gov (United States)

Zhang, Bo; Peng, Beihua; Liu, Mingchu

2012-01-01

This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997-2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from "three wastes" emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002-2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

Application research on big data in energy conservation and emission reduction of transportation industry

Science.gov (United States)

Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

2017-06-01

In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

Economic implications of reducing carbon emissions from energy use and industrial processes in Brazil.

Science.gov (United States)

Chen, Y-H Henry; Timilsina, Govinda R; Landis, Florian

2013-11-30

This study assesses the economy-wide impacts of cutting CO2 emissions on the Brazilian economy. It finds that in 2040, the business-as-usual CO2 emissions from energy use and industrial processes would be almost three times as high as those in 2010 and would account for more than half of total national CO2 emissions. The current policy aims to reduce deforestation by 70 percent by 2017 and lower emissions intensity of the overall economy by 36-39 percent by 2020. If the policy were implemented as planned and continued to 2040, there would be no need to cut CO2 emissions from energy use and industrial processes until 2035, as emissions reduction through controlling deforestation would be enough to meet the voluntary carbon mitigation target of Brazil. The study also finds that using the carbon tax revenue to subsidize wind power can effectively increase the country's wind power output if that is the policy priority. Further, it finds evidence supporting the double dividend hypothesis, i.e., using revenue from a hypothetical carbon tax to finance a cut in labor income tax can significantly lower the GDP impacts of the carbon tax. Copyright © 2013 Elsevier Ltd. All rights reserved.

Value of semi-open corridors for simultaneously connecting open and wooded habitats: a case study with ground beetles.

Science.gov (United States)

Eggers, Britta; Matern, Andrea; Drees, Claudia; Eggers, Jan; Härdtle, Werner; Assmann, Thorsten

2010-02-01

To counteract habitat fragmentation, the connectivity of a landscape should be enhanced. Corridors are thought to facilitate movement between disconnected patches of habitat, and linear strips of habitat connecting isolated patches are a popular type of corridor. On the other hand, the creation of new corridors can lead to fragmentation of the surrounding habitat. For example, heathland corridors connect patches of heathland and alternatively hedgerows connect patches of woodland. Nevertheless, these corridors themselves also break up previously connected patches of their surrounding habitat and in so doing fragment another type of habitat (heathland corridors fragment woodlands and woodland strips or hedgerows fragment heathlands). To overcome this challenge we propose the use of semi-open habitats (a mixture of heathland and woodland vegetation) as conservation corridors to enable dispersal of both stenotopic heathland and woodland species. We used two semi-open corridors with a mosaic of heathland and woody vegetation to investigate the efficiency of semi-open corridors for species dispersal and to assess whether these corridors might be a suitable approach for nature conservation. We conducted a mark-recapture study on three stenotopic flightless carabid beetles of heathlands and woodlands and took an inventory of all the carabid species in two semi-open corridors. Both methodological approaches showed simultaneous immigration of woodland and heathland species in the semi-open corridor. Detrended correspondence analysis showed a clear separation of the given habitats and affirmed that semi-open corridors are a good strategy for connecting woodlands and heathlands. The best means of creating and preserving semi-open corridors is probably through extensive grazing.

Impacts of EU carbon emission trade directive on energy-intensive industries. Indicative micro-economic analyses

International Nuclear Information System (INIS)

Lund, Peter

2007-01-01

The cost impacts from the European emission trading system (ETS) on energy-intensive manufacturing industries have been investigated. The effects consist of direct costs associated to the CO 2 reduction requirements stated in the EU Directive, and of indirect costs of comparable magnitude that originate from a higher electricity price triggered by the ETS in the power sector. The total cost impacts remain below 2% of the production value for most industries within the ETS in the Kyoto period. In the post-Kyoto phase assuming a 30% CO 2 reduction, the total cost impact may raise up to 8% of production value in the heaviest industry sectors. In steel and cement industries the cost impacts are 3-4 fold compared to the least affected pulp and paper and oil refining. Electricity-intensive industries outside the ETS will also be affected, for example in aluminum and chlorine production the indirect cost impacts from ETS could come up to 10% of production value already in the Kyoto period. As industry sectors are affected differently by the ETS some correcting mechanisms may be worthwhile to consider in securing the operation of the most electricity-intensive sectors, e.g. balancing taxation schemes that may include as income source a levy on the wind-fall profits of the power sector due to ETS. A future improvement in ETS for industries within the scheme could be scaling of the emission reduction requirement so that the relative total emission reduction costs are at about the same level. (author)

Identification of functional corridors with movement characteristics of brown bears on the Kenai Peninsula, Alaska

Science.gov (United States)

Graves, T.A.; Farley, S.; Goldstein, M.I.; Servheen, C.

2007-01-01

We identified primary habitat and functional corridors across a landscape using Global Positioning System (GPS) collar locations of brown bears (Ursus arctos). After deriving density, speed, and angular deviation of movement, we classified landscape function for a group of animals with a cluster analysis. We described areas with high amounts of sinuous movement as primary habitat patches and areas with high amounts of very directional, fast movement as highly functional bear corridors. The time between bear locations and scale of analysis influenced the number and size of corridors identified. Bear locations should be collected at intervals ???6 h to correctly identify travel corridors. Our corridor identification technique will help managers move beyond the theoretical discussion of corridors and linkage zones to active management of landscape features that will preserve connectivity. ?? 2007 Springer Science+Business Media, Inc.

Instruments to reduce pollutant emissions of the existing inland vessel fleet. Position paper for international workshop 'Emissions from the Legacy Fleet'

Energy Technology Data Exchange (ETDEWEB)

Den Boer, E.

2011-11-15

Inland waterway transport (IWT) has a key performance on the GHG emissions per tonne kilometre shipped. Due to its potential to limit climate change, the recent EU Transport White Paper has set high goals for the non-road modes. The Ports of Rotterdam (NL), Antwerp (BE) and others strive to increase the use of IWT in their hinterland transport. The Port of Rotterdam authority has imposed a modal split on the newly built container terminals, thus increasing the use of rail and IWT. The growth is estimated to result in a quadrupling of inland barge container traffic on the Rhine corridor in the timeframe 2010-2035. Local air quality is another environmental issue, however, that plays a key role. Due to reasons of long ship engine lifetimes and progress made in road transport emissions, IWT needs to improve its air pollution profile. To turn the potential of IWT into real growth, it is important to: improve the air pollutant profile of inland shipping; take responsibility to maintain the air quality levels along inland waterway corridors over Europe, especially in urban areas where road transport, industry and IWT contribute to levels that will need to be in accordance with the EU air quality directive 2008/51. A new set of standards for new engines will shortly be proposed by the European Commission to be introduced in 2016. However, these will probably not be as tight as the Euro-VI standards for road transport. In addition, the long lifetime of inland barge engines (30,000 to over 200,000 hours, depending on the engine type) will result in a slow uptake of the phase-IV engines in the fleet. The German and Dutch authorities have the opinion that not only the air pollutant emissions of new engines need to be curbed, but deliberate over the development of instruments that will reduce the pollutant emissions of the existing fleet (legacy fleet), in addition to the limitedly effective subsidy schemes applied in recent years. This paper demonstrates the need for measures

[The concentration and distribution of 137Cs in soils of forest and agricultural ecosystems of Tula Region].

Science.gov (United States)

Lipatov, D N; Shcheglov, A I; Tsvetnova, O B

2007-01-01

The paper deals with a comparative study of 137Cs contamination in forest, old arable and cultivated soils of Tula Region. Initial interception of Chernobyl derived 137Cs is higher in forest ecosystems: oak-forest > birch-forest > pine-forest > agricultural ecosystems. Vertical migration of 137Cs in deeper layers of soils was intensive in agricultural ecosystems: cultivated soils > old arable soils > birch-forest soils > oak-forest soils > pine-forest soils. In study have been evaluated spatial variability of 137Cs in soil and asymmetrical distribution, that is a skew to the right. Spatial heterogeneity of 137Cs in agricultural soils is much lower than in forest soils. For cultivated soil are determined the rate of resuspension, which equal to 6.1 x 10(-4) day(-1). For forest soils are described the 137Cs concentration in litter of different ecosystems. The role of main accumulation and barrier of 137Cs retain higher layers of soils (horizon A1(A1E) in forest, horizon Ap in agricultural ecosystems) in long-term forecast after Chernobyl accident.

The role of green corridors for wildlife conservation in urban landscape: A literature review

International Nuclear Information System (INIS)

Aziz, H A; Rasidi, M H

2014-01-01

Green corridors are an attempt to mitigate negative effects of the built environment of cities and towns. The corridors act as conservation for rapidly extreme intervention and development of the urban environment. Most importantly, it enables dispersal movement of animals within city areas. Issues relate to wildlife conservation in urban areas has been studied for many years and thus, the research makes a review for how the green corridors contribute to the conservation of urban wildlife. This study reviews groups of articles in disciplines of urban landscape planning and biology conservation to discuss the relationship between elements of green corridors and urban wildlife dispersal movement behaviour in Malaysian context. Accordingly, this research is purposely studied to give understanding on how green corridors contribute to the animals' ability of moving and dispersing within the built-up areas. In advance, it is found that there are three factors contribute to the capability of colonization among urban wildlife which are individual, physical and social factor. Green corridor has been defined as one of the physical factor that influence urban wildlife behaviour movement. Consequently, safety area indicating to animals species for traversing in any time such as at night can be defined as the primary potential corridor

Greenhouse gas emissions and sinks in the Swedish forest industry; Svenska skogsindustrins emissioner och upptag av vaexthusgaser

Energy Technology Data Exchange (ETDEWEB)

Hagberg, Linus; Karlsson, Per-Erik; Stripple, Haakan; Ek, Mats; Zetterberg, Therese; Zetterberg, Lars

2008-06-15

In this study, the greenhouse gas uptake and emissions are estimated for activities associated with the Swedish forest industry. The study is intended as an update of a previous emission inventory from 1994. The inventory includes uptake and emissions of carbon dioxide (CO{sub 2}), nitrous oxide (N{sub 2}O) and methane (CH{sub 4}) in the forest ecosystem (all productive forest land in Sweden) and in the forest industrial production system, which here includes forestry and logging, manufacturing industries (pulp and paper industry, the sawmill industry and board industry), and transport of forest raw material and forest products in Sweden. The study shows that the overall net result of the Swedish forest industry activities is an annual removals of greenhouse gases equivalent to 1.6 million tonnes of CO{sub 2} equivalents. The result is however beset with considerable uncertainties, especially with regard to changes in carbon stocks in the forest ecosystem. The overall results of the calculations are also dependent on how forest industry activities delineated. The study shows that the issues in the forest industrial production system has decreased by about 40% since the early 1990s from the equivalent 5.8 million tonnes CO{sub 2} equivalents to 3.5 million tonnes of CO{sub 2} equivalent, despite increased production. The study also shows that the forest industry total contributions to the Swedish forest constitutes a net sink of greenhouse gases, which we estimated at 5.2 million tonnes of CO{sub 2} equivalents. This is due primarily to a continued net growth in the Swedish forest, which is the result of an active and sustainable Forestry. Most of the forest land represents a significant lowering of CO{sub 2}, while the organogenic soils, which accounts for a smaller proportion of forest areas, probably account for a significant emission of CO{sub 2}. Above all, included in the calculations of gas exchange in the forest ecosystem, is a large emission of CO{sub 2

Evaluation of Efficiency Activities in the Industrial Sector Undertaken in Response to Greenhouse Gas Emission Reduction Targets

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; de la Rue du Can, Stephane; Lu, Hongyou; Horvath, Arpad

2010-05-21

The 2006 California Global Warming Solutions Act calls for reducing greenhouse gas (GHG) emissions to 1990 levels by 2020. Meeting this target will require action from all sectors of the California economy, including industry. The industrial sector consumes 25% of the energy used and emits 28% of the carbon dioxide (CO{sub 2}) produced in the state. Many countries around the world have national-level GHG reduction or energy-efficiency targets, and comprehensive programs focused on implementation of energy efficiency and GHG emissions mitigation measures in the industrial sector are essential for achieving their goals. A combination of targets and industry-focused supporting programs has led to significant investments in energy efficiency as well as reductions in GHG emissions within the industrial sectors in these countries. This project has identified program and policies that have effectively targeted the industrial sector in other countries to achieve real energy and CO{sub 2} savings. Programs in Ireland, France, The Netherlands, Denmark, and the UK were chosen for detailed review. Based on the international experience documented in this report, it is recommended that companies in California's industrial sector be engaged in a program to provide them with support to meet the requirements of AB32, The Global Warming Solution Act. As shown in this review, structured programs that engage industry, require members to evaluate their potential efficiency measures, plan how to meet efficiency or emissions reduction goals, and provide support in achieving the goals, can be quite effective at assisting companies to achieve energy efficiency levels beyond those that can be expected to be achieved autonomously.

Assessment of the impact of the European CO{sub 2} emissions trading scheme on the Portuguese chemical industry

Energy Technology Data Exchange (ETDEWEB)

Tomas, R.A.F. [Artenius Sines, Zona Industrial, 7520 Sines (Portugal); Ramoa Ribeiro, F.; Bordado, J.C.M. [Centro de Engenharia Quimica e Biologica, IBB-Instituto de Biotecnologia e Bioengenharia, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Santos, V.M.S. [Instituto Superior de Economia e Gestao, R. do Quelhas, 6, 1200-781 Lisboa (Portugal); Gomes, J.F.P. [Centro de Engenharia Quimica e Biologica, IBB-Instituto de Biotecnologia e Bioengenharia, Instituto Superior Tecnico, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Departamento de Engenharia Quimica, Instituto Superior de Engenharia de Lisboa, R. Conselheiro Emidio Navarro 1949-014 Lisboa (Portugal)

2010-01-15

This paper describes an assessment of the impact of the enforcement of the European carbon dioxide (CO{sub 2}) emissions trading scheme on the Portuguese chemical industry, based on cost structure, CO{sub 2} emissions, electricity consumption and allocated allowances data from a survey to four Portuguese representative units of the chemical industry sector, and considering scenarios that allow the estimation of increases on both direct and indirect production costs. These estimated cost increases were also compared with similar data from other European Industries, found in the references and with conclusions from simulation studies. Thus, it was possible to ascertain the impact of buying extra CO{sub 2} emission permits, which could be considered as limited. It was also found that this impact is somewhat lower than the impacts for other industrial sectors. (author)

FRACOR-software toolbox for deterministic mapping of fracture corridors in oil fields on AutoCAD platform

Science.gov (United States)

Ozkaya, Sait I.

2018-03-01

Fracture corridors are interconnected large fractures in a narrow sub vertical tabular array, which usually traverse entire reservoir vertically and extended for several hundreds of meters laterally. Fracture corridors with their huge conductivities constitute an important element of many fractured reservoirs. Unlike small diffuse fractures, actual fracture corridors must be mapped deterministically for simulation or field development purposes. Fracture corridors can be identified and quantified definitely with borehole image logs and well testing. However, there are rarely sufficient image logs or well tests, and it is necessary to utilize various fracture corridor indicators with varying degrees of reliability. Integration of data from many different sources, in turn, requires a platform with powerful editing and layering capability. Available commercial reservoir characterization software packages, with layering and editing capabilities, can be cost intensive. CAD packages are far more affordable and may easily acquire the versatility and power of commercial software packages with addition of a small software toolbox. The objective of this communication is to present FRACOR, a software toolbox which enables deterministic 2D fracture corridor mapping and modeling on AutoCAD platform. The FRACOR toolbox is written in AutoLISPand contains several independent routines to import and integrate available fracture corridor data from an oil field, and export results as text files. The resulting fracture corridor maps consists mainly of fracture corridors with different confidence levels from combination of static and dynamic data and exclusion zones where no fracture corridor can exist. The exported text file of fracture corridors from FRACOR can be imported into an upscaling programs to generate fracture grid for dual porosity simulation or used for field development and well planning.

CO_2 emissions reduction of Chinese light manufacturing industries: A novel RAM-based global Malmquist–Luenberger productivity index

International Nuclear Information System (INIS)

Emrouznejad, Ali; Yang, Guo-liang

2016-01-01

Climate change has become one of the most challenging issues facing the world. Chinese government has realized the importance of energy conservation and prevention of the climate changes for sustainable development of China's economy and set targets for CO_2 emissions reduction in China. In China industry contributes 84.2% of the total CO_2 emissions, especially manufacturing industries. Data envelopment analysis (DEA) and Malmquist productivity (MP) index are the widely used mathematical techniques to address the relative efficiency and productivity of a group of homogenous decision making units, e.g. industries or countries. However, in many real applications, especially those related to energy efficiency, there are often undesirable outputs, e.g. the pollutions, waste and CO_2 emissions, which are produced inevitably with desirable outputs in the production. This paper introduces a novel Malmquist–Luenberger productivity (MLP) index based on directional distance function (DDF) to address the issue of productivity evolution of DMUs in the presence of undesirable outputs. The new RAM (Range-adjusted measure)-based global MLP index has been applied to evaluate CO_2 emissions reduction in Chinese light manufacturing industries. Recommendations for policy makers have been discussed. - Highlights: •CO_2 emissions reduction in Chinese light manufacturing industries are measured. •A novel RAM based Malmquist–Luenberger productivity index has been developed. •Recommendation to policy makers for reducing CO_2 reduction in China are given.

Uncovering driving forces on greenhouse gas emissions in China’ aluminum industry from the perspective of life cycle analysis

International Nuclear Information System (INIS)

Liu, Zhe; Geng, Yong; Adams, Michelle; Dong, Liang; Sun, Lina; Zhao, Jingjing; Dong, Huijuan; Wu, Jiao; Tian, Xu

2016-01-01

Highlights: • Energy-related GHG emission trajectories, features and driving forces of CAI are analyzed from the perspective of LCA. • CAI experienced a rapid growth of energy-related GHG emissions from 2004 to 2013. • Energy-scale effect is the main driving force for energy-related GHG emissions increase in CAI. • Construction and transportation-related activities account for more than 40% of the total embodied emissions. • Policy implications such as developing secondary aluminum industry, improving energy mix etc, are raised. - Abstract: With the rapid growth of aluminum production, reducing greenhouse gas (GHG) emissions in China’s aluminum industry (CAI) is posing a significant challenge. In this study, the energy-related GHG emission trajectories, features and driving forces of CAI are analyzed from the perspective of life cycle analysis (LCA) from 2004 to 2013. Results indicate that CAI experienced a rapid growth of energy-related GHG emissions with an average annual growth of 28.5 million tons CO_2e from 2004 to 2013. Energy-scale effect is the main driving force for energy-related GHG emissions increase in CAI, while emission-factor effect of secondary aluminum production plays a marginal effect. Construction and transportation-related activities account for the bulk of the embodied emissions, accounting for more than 40% of the total embodied emissions from CAI. Policy implications for GHG mitigation within the CAI, such as developing secondary aluminum industry, improving energy mix and optimizing resource efficiency of production, are raised.

Trade-offs and efficiencies in optimal budget-constrained multispecies corridor networks

Science.gov (United States)

Bistra Dilkina; Rachel Houtman; Carla P. Gomes; Claire A. Montgomery; Kevin S. McKelvey; Katherine Kendall; Tabitha A. Graves; Richard Bernstein; Michael K. Schwartz

2016-01-01

Conservation biologists recognize that a system of isolated protected areas will be necessary but insufficient to meet biodiversity objectives. Current approaches to connecting core conservation areas through corridors consider optimal corridor placement based on a single optimization goal: commonly, maximizing the movement for a target species across a...

NO2 and SO2 dispersion modeling and relative roles of emission sources over Map Ta Phut industrial area, Thailand.

Science.gov (United States)

Chusai, Chatinai; Manomaiphiboon, Kasemsan; Saiyasitpanich, Phirun; Thepanondh, Sarawut

2012-08-01

Map Ta Phut industrial area (MA) is the largest industrial complex in Thailand. There has been concern about many air pollutants over this area. Air quality management for the area is known to be difficult, due to lack of understanding of how emissions from different sources or sectors (e.g., industrial, power plant, transportation, and residential) contribute to air quality degradation in the area. In this study, a dispersion study of NO2 and SO2 was conducted using the AERMOD model. The area-specific emission inventories of NOx and SO2 were prepared, including both stack and nonstack sources, and divided into 11 emission groups. Annual simulations were performed for the year 2006. Modeled concentrations were evaluated with observations. Underestimation of both pollutants was Jbund, and stack emission estimates were scaled to improve the modeled results before quantifying relative roles of individual emission groups to ambient concentration overfour selected impacted areas (two are residential and the others are highly industrialized). Two concentration measures (i.e., annual average area-wide concentration or AC, and area-wide robust highest concentration or AR) were used to aggregately represent mean and high-end concentrations Jbfor each individual area, respectively. For AC-NO2, on-road mobile emissions were found to be the largest contributor in the two residential areas (36-38% of total AC-NO2), while petrochemical-industry emissions play the most important role in the two industrialized areas (34-51%). For AR-NO2, biomass burning has the most influence in all impacted areas (>90%) exceptJor one residential area where on-road mobile is the largest (75%). For AC-SO2, the petrochemical industry contributes most in all impacted areas (38-56%). For AR-SO2, the results vary. Since the petrochemical industry was often identified as the major contributor despite not being the largest emitter, air quality workers should pay special attention to this emission group

Hazardous emissions, operating practices, and air regulations at industrial wood-fired facilities in Wisconsin

International Nuclear Information System (INIS)

Hubbard, A.J.

1993-01-01

Since October of 1988 the State of Wisconsin Department of Natural Resources has regulated over four hundred substances as hazardous air pollutants. The rule regulates new as well as existing sources of air pollution in Wisconsin. Consequently, all permits to operate an air pollution source in Wisconsin must address the hazardous air emissions potential of the source. While widely perceived as a clean-burning fuel, wood is often burned in a manner which clearly results in significant emissions of very hazardous air pollutants. Research conducted on a 20 million BTU per hour wood-fired spreader stoker boiler in northern Wisconsin showed that this boiler has the potential to emit 0.022 pound of benzene and 0.012 pound of formaldehyde per ton (lb/ton) of wood fired. Recent stack tests at more than a dozen other small industrial wood-fired facilities in Wisconsin show a range of formaldehyde emissions of 0.0007--0.1950 lb/ton. Work at Birchwood Lumber ampersand Veneer showed that the benzene and formaldehyde emission rates under good firing conditions are an order of magnitude lower than the benzene and formaldehyde emission rates under poor firing conditions. This finding has supported Wisconsin's regulatory approach of encouraging wood-fired facilities to enhance the quality of the combustion process as a technique to minimize the hazardous air pollution potential of industrial wood combustion. The Wisconsin strategy is to define open-quotes good combustion technologyclose quotes through easily measurable combustion parameters rather than emission standards. This paper presents several techniques in use in Wisconsin to comply with open-quotes good combustion technologyclose quotes for industrial wood-fired furnaces. These techniques include fuel blending overfire air, furnace insulation, and proper grate design

US uranium mining industry: background information on economics and emissions

Energy Technology Data Exchange (ETDEWEB)

Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

1984-03-01

A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U/sub 3/O/sub 8/ production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U/sub 3/O/sub 8/ production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U/sub 3/O/sub 8/ respectively. U/sub 3/O/sub 8/ production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future /sup 222/Rn emission levels for a group of 27 uranium mines. It is shown that /sup 222/Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total /sup 222/Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total /sup 222/Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate.

US uranium mining industry: background information on economics and emissions

International Nuclear Information System (INIS)

Bruno, G.A.; Dirks, J.A.; Jackson, P.O.; Young, J.K.

1984-03-01

A review of the US uranium mining industry has revealed a generally depressed industry situation. The 1982 U 3 O 8 production from both open-pit and underground mines declined to 3800 and 6300 tons respectively with the underground portion representing 46% of total production. US exploration and development has continued downward in 1982. Employment in the mining and milling sectors has dropped 31% and 17% respectively in 1982. Representative forecasts were developed for reactor fuel demand and U 3 O 8 production for the years 1983 and 1990. Reactor fuel demand is estimated to increase from 15,900 tons to 21,300 tons U 3 O 8 respectively. U 3 O 8 production, however, is estimated to decrease from 10,600 tons to 9600 tons respectively. A field examination was conducted of 29 selected underground uranium mines that represent 84% of the 1982 underground production. Data was gathered regarding population, land ownership and private property valuation. An analysis of the increased cost to production resulting from the installation of 20-meter high exhaust borehole vent stacks was conducted. An assessment was made of the current and future 222 Rn emission levels for a group of 27 uranium mines. It is shown that 222 Rn emission rates are increasing from 10 individual operating mines through 1990 by 1.2 to 3.8 times. But for the group of 27 mines as a whole, a reduction of total 222 Rn emissions is predicted due to 17 of the mines being shutdown and sealed. The estimated total 222 Rn emission rate for this group of mines will be 105 Ci/yr by year end 1983 or 70% of the 1978-79 measured rate and 124 Ci/yr by year end 1990 or 83% of the 1978-79 measured rate

Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry

International Nuclear Information System (INIS)

Wang Ke; Wang Can; Lu Xuedu; Chen Jining

2007-01-01

The international climate community has begun to assess a range of possible options for strengthening the international climate change effort after 2012. Analysis of the potential for sector-based emissions reduction and relevant mitigation options will provide the necessary background information for the debate. In order to assess the CO 2 abatement potential of China's steel industry, a model was developed using LEAP software to generate 3 different CO 2 emission scenarios for the industry from 2000 to 2030. The abatement potentials of different scenarios were compared, and their respective feasibilities were assessed according to the cost information. High priority abatement measures were then identified. The results show that the average CO 2 abatement per year in the Recent Policy scenario and in the New Policy scenario, compared with the reference scenario, are 51 and 107 million tons, respectively. The corresponding total incremental costs are 9.34 and 80.95 billion dollars. It is concluded that there is great potential for CO 2 abatement in China's steel industry. Adjusting the structure of the industry and technological advancement will play an important role in emissions reduction. Successful implementation of current sustainable development policies and measures will result in CO 2 abatement at a low cost. However, to achieve higher levels of abatement, the cost will increase dramatically. In the near future, specific energy conservation technologies such as dry coke quenching, exhaust gas and heat recovery equipment will be of great significance. However, taking a long term perspective, emissions reduction will rely more on the adjustment of production processes and the application of more modern large scale plants. Advanced blast furnace technology will inevitably play an important role

Industrial strategies for improving energy efficiency and reducing greenhouse gas emissions: Examples from the Climate Wise program

International Nuclear Information System (INIS)

Buhsmer, K.; Nelson, H.; Wayman, A.; Winkelman, S.; Milmoe, P.H.

1997-01-01

Climate Wise is a partnership initiative between the US Environmental Protection Agency (EPA), the US Department of Energy (DOE), and industry designed to stimulate the voluntary reduction of greenhouse gas emissions among participating manufacturing companies. Climate Wise works with the manufacturing sector, which comprises 25 to 30 percent of the total US energy consumption, to promote the continued and increased implementation of energy efficiency and other pollution prevention measures. This paper reviews the energy use and CO 2 emissions profiles of the following three energy intensive industries: cement, petroleum, and iron and steel. The paper also identifies what a typical Action Plan for a company from each of these industries might look like and the types of savings (energy, CO 2 emissions, and energy costs) which might be achieved. The measures featured in these Action Plans are widely applicable and are likely to offer relatively short payback times. In addition, the paper describes other measures and existing or emerging technologies that may be available to these industries

Carbon-14 based determination of the biogenic fraction of industrial CO2 emissions : Application and validation

NARCIS (Netherlands)

Palstra, S. W. L.; Meijer, H. A. J.

The C-14 method is a very reliable and sensitive method for industrial plants, emission authorities and emission inventories to verify data estimations of biogenic fractions of CO2 emissions. The applicability of the method is shown for flue gas CO2 samples that have been sampled in I-h intervals at

Model-based corridor performance analysis – An application to a European case

DEFF Research Database (Denmark)

Panagakos, George; Psaraftis, Harilaos N.

2017-01-01

to a number of Key Performance Indicators (KPIs). It consists of decomposing the corridor into transport chains, selecting a sample of typical chains, assessing these chains through a set of KPIs, and then aggregating the chain-level KPIs to corridor-level ones using proper weights. A critical feature...... refinement and verification. The sample construction part of the methodology was tested on GreCOR, a green corridor project in the North Sea Region, using the Danish National Traffic Model as the principal source of information for both sample construction and KPI estimation. The results show that...

Identifying Corridors among Large Protected Areas in the United States.

Directory of Open Access Journals (Sweden)

R Travis Belote

Full Text Available Conservation scientists emphasize the importance of maintaining a connected network of protected areas to prevent ecosystems and populations from becoming isolated, reduce the risk of extinction, and ultimately sustain biodiversity. Keeping protected areas connected in a network is increasingly recognized as a conservation priority in the current era of rapid climate change. Models that identify suitable linkages between core areas have been used to prioritize potentially important corridors for maintaining functional connectivity. Here, we identify the most "natural" (i.e., least human-modified corridors between large protected areas in the contiguous Unites States. We aggregated results from multiple connectivity models to develop a composite map of corridors reflecting agreement of models run under different assumptions about how human modification of land may influence connectivity. To identify which land units are most important for sustaining structural connectivity, we used the composite map of corridors to evaluate connectivity priorities in two ways: (1 among land units outside of our pool of large core protected areas and (2 among units administratively protected as Inventoried Roadless (IRAs or Wilderness Study Areas (WSAs. Corridor values varied substantially among classes of "unprotected" non-core land units, and land units of high connectivity value and priority represent diverse ownerships and existing levels of protections. We provide a ranking of IRAs and WSAs that should be prioritized for additional protection to maintain minimal human modification. Our results provide a coarse-scale assessment of connectivity priorities for maintaining a connected network of protected areas.

Effects of corridors on home range sizes and interpatch movements of three small mammal species.

Energy Technology Data Exchange (ETDEWEB)

Mabry, Karen, E.; Barrett, Gary, W.

2002-04-30

Mabry, K.E., and G.W. Barrett. 2002. Effects of corridors on home range sizes and interpatch movements of three small mammal species. Landscape Ecol. 17:629-636. Corridors are predicted to benefit populations in patchy habitats by promoting movement, which should increase population densities, gene flow, and recolonization of extinct patch populations. However, few investigators have considered use of the total landscape, particularly the possibility of interpatch movement through matrix habitat, by small mammals. This study compares home range sizes of 3 species of small mammals, the cotton mouse, old field mouse and cotton rat between patches with and without corridors. Corridor presence did not have a statistically significant influence on average home range size. Habitat specialization and sex influenced the probability of an individual moving between 2 patches without corridors. The results of this study suggest that small mammals may be more capable of interpatch movement without corridors than is frequently assumed.

CO2 emissions abatement in the Nordic carbon-intensive industry – An end-game in sight?

International Nuclear Information System (INIS)

Rootzén, Johan; Johnsson, Filip

2015-01-01

Analysing different future trajectories of technological developments we assess the prospects for Nordic carbon-intensive industries to significantly reduce direct CO 2 emissions in the period 2010–2050. This analysis covers petroleum refining, integrated iron and steel production, and cement manufacturing in the four largest Nordic countries of Denmark, Finland, Norway, and Sweden. Our results show that the implementation of currently available abatement measures will not be enough to meet the ambitious emissions reduction targets envisaged for the Year 2050. We show how an extensive deployment of CCS (carbon capture and storage) could result in emissions reductions that are in line with such targets. However, large-scale introduction of CCS would come at a significant price in terms of energy use and the associated flows of captured CO 2 would place high requirements on timely planning of infrastructure for the transportation and storage of CO 2 . Further the assessment highlights the importance of, especially in the absence of successful deployment of CO 2 capture, encouraging increased use of biomass in the cement and integrated iron and steel industries, and of promoting the utilisation of alternative raw materials in cement manufacturing to complement efforts to improve energy efficiency. - Highlights: • Scenarios exploring the potential for reducing CO 2 emissions in Nordic industry. • Current measures not sufficient to comply with stringent emission reduction targets. • CCS enables carbon-intensive industries to comply with stringent reduction targets. • CCS would come at a high price in terms of energy use. • Without CO 2 capture increased use of biomass and alternative raw materials vital

Emissions trading and innovation in the German electricity industry

Energy Technology Data Exchange (ETDEWEB)

Cames, Martin

2010-07-01

One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of allowances

Emissions trading and innovation in the German electricity industry

Energy Technology Data Exchange (ETDEWEB)

Cames, Martin

2010-07-01

One major objective of the introduction of emissions trading in the European Union was to promote innovation towards mitigating climate change. Focusing on the German electricity industry, the extent to which this objective has been achieved up to now and how the design of the trading scheme could be improved towards achieving the intended objective shall be analyzed in this thesis. These questions are tackled in the thesis from a theoretical and an empirical perspective. The theoretical analysis was largely based on neoclassical environmental economics by using an algebraic model which allowed for comparison of the relevant companies' profits under various configurations of the analyzed design options. The empirical analysis was grounded on two surveys of the electricity industry - one before the start of emissions trading, the other after two and a half years of experience - which enabled identification of the concrete changes in the companies' perceptions and attitudes towards innovation due to the introduction of emissions trading. The analysis reveals some indications that the instrument has basically functioned as originally intended although it has certainly not yet developed its full potential in terms of promoting innovation towards a more climate friendly electricity system. From an environmental innovation perspective the following improvements are essential: (1) Closure provisions should be abolished as soon as possible because they basically extend the lifetime of old installations and thus rather delay innovation. (2) Fuel-specific allocation to new entrants should also be abandoned since it eliminates - at least partly - the incentives to shift investments towards technologies which use more carbon friendly fuels such as natural gas or biomass. (3) Introducing full auctioning for the electricity industry would remedy both of the above-mentioned weaknesses and at the same time eliminate the windfall profit generated by free allocation of

Air pollution from industrial waste gas emissions is associated with cancer incidences in Shanghai, China.

Science.gov (United States)

Cong, Xiaowei

2018-05-01

Outdoor air pollution may be associated with cancer risk at different sites. This study sought to investigate outdoor air pollution from waste gas emission effects on multiple cancer incidences in a retrospective population-based study in Shanghai, China. Trends in cancer incidence for males and females and trends in waste gas emissions for the total waste gas, industrial waste gas, other waste gas, SO 2 , and soot were investigated between 1983 and 2010 in Shanghai, China. Regression models after adjusting for confounding variables were constructed to estimate associations between waste gas emissions and multiple cancer incidences in the whole group and stratified by sex, Engel coefficient, life expectancy, and number of doctors per 10,000 populations to further explore whether changes of waste gas emissions were associated with multiple cancer incidences. More than 550,000 new cancer patients were enrolled and reviewed. Upward trends in multiple cancer incidences for males and females and in waste gas emissions were observed from 1983 to 2010 in Shanghai, China. Waste gas emissions came mainly from industrial waste gas. Waste gas emissions was significantly positively associated with cancer incidence of salivary gland, small intestine, colorectal, anus, gallbladder, thoracic organs, connective and soft tissue, prostate, kidney, bladder, thyroid, non-Hodgkin's lymphoma, lymphatic leukemia, myeloid leukemia, and other unspecified sites (all p emissions and the esophagus cancer incidence was observed (p emissions was associated with multiple cancer incidences.

Generation and Use of Thermal Energy in the U.S. Industrial Sector and Opportunities to Reduce its Carbon Emissions

Energy Technology Data Exchange (ETDEWEB)

McMillan, Colin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2016-12-01

This report quantifies greenhouse gas (GHG) emissions from the industrial sector and identifies opportunities for non-GHG-emitting thermal energy sources to replace the most significant GHG-emitting U.S. industries based on targeted, process-level analysis of industrial heat requirements. The intent is to provide a basis for projecting opportunities for clean energy use. This provides a prospectus for small modular nuclear reactors (including nuclear-renewable hybrid energy systems), solar industrial process heat, and geothermal energy. This report provides a complement to analysis of process-efficiency improvement by considering how clean energy delivery and use by industry could reduce GHG emissions.

Does trade openness affect CO2 emissions: evidence from ten newly industrialized countries?

Science.gov (United States)

Zhang, Shun; Liu, Xuyi; Bae, Junghan

2017-07-01

This paper examines whether the hypothetical environmental Kuznet curve (EKC) exists or not and investigates how trade openness affects CO 2 emissions, together with real GDP and total primary energy consumption. The study sample comprises ten newly industrialized countries (NICs-10) from 1971 to 2013. The results support the existence of hypothetical EKC and indicate that trade openness negatively and significantly affects emissions, while real GDP and energy do positive effects of emissions. Moreover, the empirical results of short-run causalities indicate feedback hypothetical linkage of real GDP and trade, unidirectional linkages from energy to emissions, and from trade to energy. The error correction terms (ECTs) reveal in the long run, feedback linkages of emissions, real GDP, and trade openness, while energy Granger causes emissions, real GDP, and trade, respectively. The study recommendations are that our policymakers should encourage and expand the trade openness in these countries, not only to restrain CO 2 emissions but also to boost their growth.

EMISSION AND TRENDS IN RECLAIMING WASTE HEAT IN INDUSTRIAL INSTALATIONS

Directory of Open Access Journals (Sweden)

Lech Hys

2013-04-01

Full Text Available The article presents the analysis of waste heat emission in a typical industrial installation. On the basis of the process monitoring system, periodic analyses of fumes composition, installation process manual and the conducted measurements of the heat fluxes from individual sources emitting heat on the way of natural convection from the devices’ coats and forced convection in the fumes flux were calculated. According to the authors the heat of temperature 140–155 °C and surface power density 860–970 W/m2 emitted by devices’ covers can be reclaimed in ORC techniques, Peltier’s modules and the systems realising Stirling cycle. Part of the waste heat included in fumes, which makes c.a. 76% of the total emission from the installation, should be returned to the process of fuel oxidation, what will reduce the emission by c.a. 18% and the volume of consumed fuel by c.a. 25 m3 CH4/h, according to the presented calculations.

Reducing information asymmetry in the power industry: Mandatory and voluntary information disclosure regulations of sulfur dioxide emission

International Nuclear Information System (INIS)

Zhu Xufeng; Zhang Chao

2012-01-01

This paper focuses on the institutional framework for sulfur dioxide emission information disclosure (SDEID) in power industries. The authors argue that mandatory and voluntary SDEID are two complementary regulatory instruments for emission reduction in the power industry. An analytical framework of SDEID with six facets is suggested in this paper to demonstrate relevant legal provisions and regulatory policies of mandatory and voluntary SDEID of power industries in the US. Empirical research shows that mandatory and voluntary SDEID of the power industry have been regulated simultaneously in the US. The foundation of power companies' willingness to disclose emission information voluntarily is the combination of mandatory scientific monitoring with market regulation in the current SDEID system in the US. In comparison, the SDEID of power industries has yet to be widely implemented in developing countries. Finally, the paper provides some implications to developing countries that plan to learn institutional arrangements from developed countries. - Highlights: ► Mandatory and voluntary SDEID are two complementary regulatory instruments. ► An analytical framework is suggested to demonstrate SDEID of power industry in the US. ► Voluntary disclosure can be attributed to scientific monitoring and market regulation. ► We provide implications to developing countries learning from developed countries.

Seasonal Dynamics of River Corridor Exchange Across the Continental United States

Science.gov (United States)

Gomez-Velez, J. D.; Harvey, J. W.; Scott, D.; Boyer, E. W.; Schmadel, N. M.

2017-12-01

River corridors store and convey mass and energy from landscapes to the ocean, altering water quality and ecosystem functioning at the local, reach, and watershed scales. As water moves through river corridors from headwaters streams to coastal estuaries, dynamic exchange between the river channel and its adjacent riparian, floodplain, and hyporheic zones, combined with ponded waters such as lakes and reservoirs, results in the emergence of hot spots and moments for biogeochemical transformations. In this work, we used the model Networks with EXchange and Subsurface Storage (NEXSS) to estimate seasonal variations in river corridor exchange fluxes and residence times along the continental United States. Using a simple routing scheme, we translate these estimates into a cumulative measure of river corridor connectivity at the watershed scale, differentiating the contributions of hyporheic zones, floodplains, and ponded waters. We find that the relative role of these exchange subsystems changes seasonally, driven by the intra-seasonal variability of discharge. In addition, we find that seasonal variations in discharge and the biogeochemical potential of hyporheic zones are out of phase. This behavior results in a significant reduction in hyporheic water quality functions during high flows and emphasizes the potential importance of reconnecting floodplains for managing water quality during seasonal high flows. Physical parameterizations of river corridor processes are critical to model and predict water quality and to sustainably manage water resources under present and future socio-economic and climatic conditions. Parsimonious models like NEXSS can play a key role in the design, implementation, and evaluation of sustainable management practices that target both water quantity and quality at the scale of the nation. This research is a product of the John Wesley Powell Center River Corridor Working Group.

Building a Cultural Heritage Corridor Based on Geodesign Theory and Methodology

Directory of Open Access Journals (Sweden)

Yang Chen

Full Text Available ABSTRACT: Geodesign is a type of methodology that integrates dynamic environment modeling based on GIS with planning and design in order to support relevant decision making. It has substantially changed the dominant ways of thinking in planning and design, and has solved spatial issues relating to cultural and natural resources from a new perspective. Taking the Qionglai section of the Southern Silk Road as an example, the present study implemented geodesign theory and methods to investigate the technical approach to building a cultural heritage corridor based on GIS spatial analysis and overlay analysis.Firstly, we analyzed the various data layers of the cultural and natural features in the planning region. We organized all the data based on the principle of classification, organizing it into categories such as natural, cultural, and recreational data. Therefore, we defined the theme of the Southern Silk Road as a historical cultural heritage corridor. Secondly, based on the background, the heritage corridor boundary was defined according to its natural, cultural, and administrative spatial characteristics, with the three thematic boundaries overlaid in order to define a boundary location area covering about 852 square kilometers. Next, we divided all of the resources into three categories: natural heritage resources, cultural heritage resources, and intangible heritage resources and recreational spaces. The elements which could be used to build up the cultural heritage corridor were selected by evaluation and spatial analysis. In this way, we obtained some conclusive spatial information, such as element structures, the heritage density distribution, and the heritage number distribution. Finally, within the heritage boundary, we connected the tangible and intangible heritage resources to form various kinds of linear spaces, with the aim of obtaining the spatial pattern of the heritage corridor. KEYWORDS: Geodesign, heritage corridor, heritage

Effects of weighting schemes on the identification of wildlife corridors generated with least-cost methods

Science.gov (United States)

Sean A. Parks; Kevin S. McKelvey; Michael K. Schwartz

2012-01-01

The importance of movement corridors for maintaining connectivity within metapopulations of wild animals is a cornerstone of conservation. One common approach for determining corridor locations is least-cost corridor (LCC) modeling, which uses algorithms within a geographic information system to search for routes with the lowest cumulative resistance between target...

Geographical Detector Model for Influencing Factors of Industrial Sector Carbon Dioxide Emissions in Inner Mongolia, China

Directory of Open Access Journals (Sweden)

Rina Wu

2016-02-01

Full Text Available Studying the influencing factors of carbon dioxide emissions is not only practically but also theoretically crucial for establishing regional carbon-reduction policies, developing low-carbon economy and solving the climate problems. Therefore, we used a geographical detector model which is consists of four parts, i.e., risk detector, factor detector, ecological detector and interaction detector to analyze the effect of these social economic factors, i.e., GDP, industrial structure, urbanization rate, economic growth rate, population and road density on the increase of energy consumption carbon dioxide emissions in industrial sector in Inner Mongolia northeast of China. Thus, combining with the result of four detectors, we found that GDP and population more influence than economic growth rate, industrial structure, urbanization rate and road density. The interactive effect of any two influencing factors enhances the increase of the carbon dioxide emissions. The findings of this research have significant policy implications for regions like Inner Mongolia.

Reducing Carbon Dioxide Emissions from the EU Power and Industry Sectors. An assessment of key technologies and measures

Energy Technology Data Exchange (ETDEWEB)

Rootzen, Johan

2012-11-01

In February 2011, the European Council reconfirmed the goal of reducing EU greenhouse gas emissions by at least 80 % by 2050, as compared to the levels in 1990. The power and industrial sectors currently account for almost half of the total GHG emissions in the EU. The overall objective of the work presented in this thesis is to provide a technology-based perspective on the feasibility of significant reductions in CO{sub 2} emissions in the EU power and industrial sectors, with the emphasis on expected turnover in the capital stock of the existing infrastructure. Three sectors of industry are included: petroleum refining; iron and steel production; and cement manufacturing. The analysis is based on a thorough description and characterization of the current industry infrastructure and of the key mitigation technologies and measures in each sector. The analysis comprises investigations of how specific factors, such as the age structure of the capital stock, technology and fuel mix, and spatial distribution of the plant stock, contribute to facilitating or hindering the shift towards less-emission-intensive production processes. The results presented here are the synthesis of the results described in the following three papers: Paper I investigates the potential for CCS in industrial applications in the EU by considering branch- and plant-specific conditions; Paper II assesses strategies for CO{sub 2} abatement in the European petroleum refining industry; and Paper III explores in a scenario analysis the limits for CO{sub 2} emission abatement within current production processes in the power and industrial sectors. Together, the three papers provide a comprehensive assessment of the roles of technologies and measures that are commercially available today, as well as those of emerging technologies that are still in their early phases of development. The results presented in Paper III show that the EU goal for emissions reductions in the sectors covered by the EU ETS, i

Energy transport corridors: the potential role of Federal lands in states identified by the Energy Policy Act of 2005, section 368(b).

Energy Technology Data Exchange (ETDEWEB)

Krummel, J.; Hlohowskyj, I.; Kuiper, J.; Kolpa, R.; Moore, R.; May, J.; VanKuiken, J.C.; Kavicky, J.A.; McLamore, M.R.; Shamsuddin, S. (Decision and Information Sciences); ( EVS)

2011-09-01

106 of the National Historic Preservation Act (NHPA). Under Section 368, Congress divided the United States into two groups of states: the 11 contiguous western states and the remaining states. Direction for energy transportation corridor analysis and selection in the 11 western states was addressed in Section 368(a) of EPAct, while direction for energy transportation corridor analysis and selection in all other states was addressed under Section 368(b) of EPAct. It was clearly the priority of Congress to conduct corridor location studies and designation first on federal lands in the western states. Under Section 368(a), the Agencies produced a programmatic environmental impact statement (EIS), Designation of Energy Corridors on Federal Land in the 11 Western States (DOE and DOI 2008), that was used in part as the basis for designating more than 6,000 mi (9,656 km) of energy transportation corridors on federal land in 11 western states. Under Section 368(a) of EPAct, Congress clearly stated the Agencies needed to (1) designate energy transportation corridors on federal land, (2) conduct the necessary environmental review of the designated corridors, and (3) incorporate the designated corridors into the appropriate land use plans. Congressional direction under Section 368(b) of EPAct differs from that provided under Section 368(a). Specifically, Section 368(b) requires the secretaries of the Agencies, in consultation with the Federal Energy Regulatory Commission (FERC), affected utility industries, and other interested persons, to jointly: (1) Identify corridors for oil, gas, and hydrogen pipelines and electricity transmission and distribution facilities on federal land in states other than the 11 western states identified under Section 368(a) of EPAct, and (2) Schedule prompt action to identify, designate, and incorporate the corridors into the applicable land use plans. While Section 368(a) clearly directs designation as a necessary first step for energy

The influence of forest shelterbelts on 137Cs fallout in Chernobyl affected areas (Tula region, Russia).

Science.gov (United States)

Ivanov, Maxim; Shamshurina, Eugeniya; Tatyana, Paramonova; Vladimir, Belyaev; Angelina, Gavruchenkova; Nikolai, Lugovoy; Konstantinov, Pavel

2015-04-01

The radioactive fallout after Chernobyl accident caused serious contamination by 137Cs along extensive area of East-European plain.Cs137 fall down on earth surface in two ways: gravitational - "dry" and rainfall - "wet" way. "Dry" fallout is a result of direct deposition of radionuclides from atmosphere with average speed of about 0.1-1 mm/sec. The fate of "dry fall"is far less than rainfall mechanism. Erupted water steam of reactor zone full of radioactive material enriched precipitation with 137Cs. Therefore, the derived spatial structure of contamination was under control of rainfall pattern in May-June 1986. On the areas affected by rainfall fallout was the Southern part of Tula region in Middle Russia. It got name as "Plava hot spot" by the town in the center of this area. Tula is a traditional rural region, the vast areas covered by chernozem soils are cultivated for centuries. During cultivation forest cover was reduced that urged growth of wind erosion and loss of soil fertility. Hence, in the middle of 20 the century large arrangements for creation of forest shelterbelts were conducted. High efficiency of shelterbelts made them a widely provided part of new human-transformed landscape. Usually shelterbelts are set as a regular network across main direction of winds in particular region. Such organization help to reduce speed of air steam in the lowest 20-30 m layer of atmosphere. In addition, shelterbelts are very good collectors of snow in winter time which increase total moisture of soil and its fertility. Represented investigation is conducted to find out any correlation between shelterbelts and fallout of radionuclides. If such correlation is significant, it has to be taken into account for further environmental surveys. Two shelterbelts on the interfluve positions were chosen for detailed examination. Both selected objects emerged before 1986 but have different width, floristic composition, orientation and type of construction. One of shelterbelts is

VT Electric Transmission Line Corridors - substation points

Data.gov (United States)

Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

Science.gov (United States)

Kitikun, Medhawin

This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario

75 FR 70962 - California Green Trade Corridor Transportation Investment Generating Economic Recovery (TIGER)

Science.gov (United States)

2010-11-19

... DEPARTMENT OF TRANSPORTATION Maritime Administration [Docket Number 2010-0103] California Green Trade Corridor Transportation Investment Generating Economic Recovery (TIGER) AGENCY: Department of... California Green Trade Corridor Transportation Investment Generating Economic Recovery (TIGER) grant. An...

Exergetic Assessment for Resources Input and Environmental Emissions by Chinese Industry during 1997–2006

Directory of Open Access Journals (Sweden)

Bo Zhang

2012-01-01

Full Text Available This paper presents an overview of the resources use and environmental impact of the Chinese industry during 1997–2006. For the purpose of this analysis the thermodynamic concept of exergy has been employed both to quantify and aggregate the resources input and the environmental emissions arising from the sector. The resources input and environmental emissions show an increasing trend in this period. Compared with 47568.7 PJ in 1997, resources input in 2006 increased by 75.4% and reached 83437.9 PJ, of which 82.5% came from nonrenewable resources, mainly from coal and other energy minerals. Furthermore, the total exergy of environmental emissions was estimated to be 3499.3 PJ in 2006, 1.7 times of that in 1997, of which 93.4% was from GHG emissions and only 6.6% from “three wastes” emissions. A rapid increment of the nonrenewable resources input and GHG emissions over 2002–2006 can be found, owing to the excessive expansion of resource- and energy-intensive subsectors. Exergy intensities in terms of resource input intensity and environmental emission intensity time-series are also calculated, and the trends are influenced by the macroeconomic situation evidently, particularly by the investment-derived economic development in recent years. Corresponding policy implications to guide a more sustainable industry system are addressed.

On the origin and magnitude of pre-industrial anthropogenic CO[sub 2] and CH[sub 4] emissions

Energy Technology Data Exchange (ETDEWEB)

Kammen, D.M.; Marino, B.D. (Harvard University, Cambridge, MA (USA). Dept. of Physics)

Little is known of the origin and magnitude of anthropogenic non-fossil emissions, although this activity currently contributes up to 40% of the global CO[sub 2] emissions. Here we provide estimates of CO[sub 2] and CH[sub 4] emissions resulting from pre-industrial societies by combining historical demographic and archaeological data. Combustion of non-fossil carbon for domestic needs, small-scale industrial/craft activities and resulting from agricultural land management was significant, reaching about 1 Gt of carbon (Gtc) as CO[sub 2] yr[sup -1] and 10 g Tg of carbon CH[sub 4] yr[sup -1] by 1800 A.D. This data implies a significant anthropogenic source of pre-industrial atmospheric greenhouse gases, consistent with estimates derived from carbon cycle model. We illustrate the contribution of archaeological data with two case studies: (1) estimates of CH[sub 4] emissions from agricultural activity from the Maya Lowlands; and (2) evidence of correlations between climatic and socio-economic conditions in North Atlanic Norse settlements. 47 refs., 3 figs., 2 tabs.

Aeolian process of the dried-up riverbeds of the Hexi Corridor, China: a wind tunnel experiment.

Science.gov (United States)

Zhang, Caixia; Wang, Xunming; Dong, Zhibao; Hua, Ting

2017-08-01

Wind tunnel studies, which remain limited, are an important tool to understand the aeolian processes of dried-up riverbeds. The particle size, chemical composition, and the mineral contents of sediments arising from the dried river beds are poorly understood. Dried-up riverbeds cover a wide area in the Hexi Corridor, China, and comprise a complex synthesis of different land surfaces, including aeolian deposits, pavement surfaces, and Takyr crust. The results of the present wind tunnel experiment suggest that aeolian transport from the dried-up riverbeds of the Hexi Corridor ranges from 0 to 177.04 g/m 2 /min and that dry riverbeds could be one of the main sources of dust emissions in this region. As soon as the wind velocity reaches 16 m/s and assuming that there are abundant source materials available, aeolian transport intensity increases rapidly. The dried-up riverbed sediment and the associated aeolian transported material were composed mainly of fine and medium sands. However, the transported samples were coarser than the bed samples, because of the sorting effect of the aeolian processes on the sediment. The aeolian processes also led to regional elemental migration and mineral composition variations.

The Australian coal industry: now, and the future under carbon dioxide emission restrictions

International Nuclear Information System (INIS)

Cain, D.A.

1990-01-01

Coal produces more carbon dioxide per unit of combustion energy than other fossil fuels. Therefore, reducing coal consumption is commonly advocated as one way to control greenhouse gas emissions and hence predicted global warming. Australia is highly dependent on coal, both as a primary energy source and as a major export commodity. Action to reduce carbon dioxide emissions by substantially decreasing coal consumption would have a very serious impact on the Australian coal industry and the Australian economy. Australia's dependence on coal and the potential conflict between the objective of further processing Australia's mineral exports and calls to limit carbon dioxide emissions is described. The effect on coal consumption of one scenario for reducing Australia's carbon dioxide emissions from electricity generation and possible effects of global carbon dioxide emission reductions on world coal trade are discussed. 24 refs., 2 tabs., 4 figs

Toxic emissions during co-combustion of biomass-waste wood-lignite blends in an industrial boiler.

Science.gov (United States)

Samaras, P; Skodras, G; Sakellaropoulos, G P; Blumenstock, M; Schramm, K W; Kettrup, A

2001-01-01

The objectives of this work were to study the PCDD/F emissions during the co-combustion of waste wood/coal co-combustion in an industrial boiler and to determine the relation of the toxic emissions to the fuel properties. Co-combustion experiments were performed in a 13.8 MWthermal industrial moving grate combustor. The fuels which were examined in this study included Greek lignite, natural uncontaminated wood, power poles and medium density fibers (MDFs) which were by-products of the plant production process. Fuel blends were prepared by mixing single components in various concentrations. PCDD/F emissions were collected during experimental runs and were analyzed according to standard methods. Low PCDD/F emissions were obtained during the co-combustion tests, lower than the limit value of 0.1 ng TEQ/Nm3. The lowest values were observed during the combustion of fuel blends containing MDF, possibly due to the inhibitory action of some of the N-containing MDF ingredients, such as urea. No direct correlation was found between the PCDD/F and the copper emissions, while examination of the PCDD/F homologue patterns revealed the predominance of the lower chlorinated isomers over the higher ones.

Integrated corridor management : implementation guide and lessons learned (final report version 2.0).

Science.gov (United States)

2015-09-01

This implementation guide is intended for use by adopters of integrated corridor management (ICM) approaches and strategies to address congestion and travel time reliability issues within specific travel corridors. It introduces the topic of ICM and ...

Rail transportation corridor analysis report: Deaf Smith County location in the Palo Duro Basin, Texas

International Nuclear Information System (INIS)

1986-10-01

An environmental data base was developed for the purpose of preliminary siting of potential rail access corridors between existing rail lines and the potential repository site in Deaf Smith County, Texas. The categories of the data base were environmental conditions considered significant in rail line construction and operation. These included land cover, population areas, slope, surface hydrology, cultivated prime agricultural lands, cultural features, and utility rights-of-way. The categories were divided into avoidance, constraint, and opportunity features, and the constraint features were then weighted for environmental impact potential. An environmental screening analysis using the computerized Geographical Information System (GIS) was then performed. The analysis involved applying the GIS overlay process to the various constraint data categories to produce a composite constraint map of the study area. The composite constraint map, color coded for various levels of constraint to corridor siting, was subsequently used as a guide for the selection of a series of alternative corridors. By means of a further application of GIS procedures, the corridor alternatives were statistically analyzed for adherence to corridor selection guidelines. In addition, a supplementary analysis was performed to compare the alternatives in terms of four impact categories: road crossings, construction costs, degree of land disruption, and population impact. The statistical and supplementary impact analyses led to a preliminary selection of a preferred corridor. The corridor assessment process indicated the importance of analyzing alternative trade-offs, as well as the need for more detailed investigation of certain conditions and a detailed comparison of alternatives prior to final corridor siting

Nitrogen retention in river corridors: European perspective

Energy Technology Data Exchange (ETDEWEB)

Haycock, N [Dept. of Agriculture and Water Management, Silsoe College, Cranfield Institute of Technology (United Kingdom); Pinay, G [CERR/CNRS, Toulouse (France); Walker, Charles [SBEG, Inst. of Ecology, Lund Univ. (Sweden)

1993-01-01

The problem of nitrogen pollution in European surface- and groundwaters has become a focus of recent European and Scandinavian directives, with legislation calling for a 50% reduction of N losses by the years 1995 and 2000, respectively. This paper provides a conceptual framework upon which management strategies to reduce losses of diffuse nitrogen pollution to surface waters may be based. The control of nitrogen pollution may take place through an increase in the complexity of the landscape, not throughout the catchment area, but rather in specific zones, the river corridor in particular. Within river corridors, riparian areas have been recognized globally for their value as nutrient removal ''buffer systems''. Studies have identified vegetation uptake and microbial denitrification as the primary mechanisms responsible for N removal in these systems. For these processes to function optimally on an annual basis, both vegetation and water regime must be managed. The establishment and management of riparian buffer zones in suitable places within river corridors, will provide a stable and sustainable water-protection function. This will complement future nitrogen input control strategies, needed for both the long-term protection of groundwater and surface waters in Europe as a whole, and for the proposed 50% reduction in nitrogen loading to the Baltic and North Sea coastal waters by the turn of the century. 52 refs, 5 figs

The Western Energy Corridor Initiative: Unconventional Fuel Development Issues, Impacts, and Management Assessment

Science.gov (United States)

Wolfsberg, A.; Hagood, M.; Pasqualini, D.; Wood, T.; Wilson, C.; Witkowski, M.; Levitt, D.; Pawar, R.; Keating, G.; Ziock, H.

2008-12-01

The United States is increasingly dependent on imported oil and gas; commodities for which other nations are competing and for which future supply may be inadequate to support our transportation fuel needs. Therefore, a renewed interest in 'harder-to-get' unconventional fuels has emerged in both industry and government with directed focus on world class hydrocarbon resources within a corridor extending from Canada southward through the Rocky Mountain States. Within this Western Energy Corridor, co-located with significant conventional hydrocarbon and renewable energy resources, lie some of the world's richest unconventional hydrocarbon resources in oil shales, oil sands and coal for coal-to-liquid conversion. However, development of these resources poses substantial environmental concerns as well as increasing competition for limited resources of water and habitat. With large-scale energy development in the predominantly rural region, local communities, infrastructures, and economies will face increasing demands for roads, electricity, law enforcement, labor, and other support services. The Western Energy Corridor Initiative (WECI) seeks to develop an integrated assessment of the impacts of unconventional fuel development, the interrelationships of planned energy developments in different basins, and the resultant demands placed on the region. This initial WECI study focuses on two of the most important current issues for industry, regulators, and stakeholders -- the assessment of carbon and water resources issues, impacts, and management strategies. Through scenario analyses using coupled systems and process level models, this study investigates the viability of integrated development of multiple energy resources in a carbon neutral and environmentally acceptable manner, and the interrelationships of various energy resource development plans. The modeling framework is designed to extend to include infrastructure, employment, training, fiscal and economic demands

Attractive Mobile Corridors - The Power of Light Rail Infrastructures

DEFF Research Database (Denmark)

Olesen, Mette; Lassen, Claus

2013-01-01

Light rail is a popular tool in urban development strategies in many European cities. One argument for choosing a rail-based solution is that it signals stability to investors and will attract development and investments in the corridor. The choice of corridor in the various light rail cities...... and redistributes urban space. Furthermore light rail is not only a physical infrastructure but also an infrastructure of power that is carefully planned and designed creating both mental and physical patterns of mobilities and immobilities. Hence it is important to underline that mobility systems, such as light...

How green are the TEN-T core network corridors?

DEFF Research Database (Denmark)

Panagakos, George; Psaraftis, Harilaos N.

defining this concept, identified the characteristics that distinguish a green corridor from an otherwise efficient one. The main thesis of this paper is that the „core network corridors‟ of the new TEN-T guidelines exhibit all these qualities and the vision of a green corridor network in Europe is close...... to reality. To support this thesis, and in continuation of the work of SuperGreen, the paper examines the proposed new „guidelines‟ for the development of the TEN-T after presenting a brief history of transport network development in Europe....

A System of Tradable Permits to Control Emission of Greenhouse Gases in Norway. Challenges for the Petroleum Industry

Energy Technology Data Exchange (ETDEWEB)

Schreiner, Per

1998-07-01

This presentation discusses the instruments of climate policy, comments on carbon taxes, outlines a tradable permits system, tradable permits and the petroleum industry, revenue from the offshore, and clarifies impact for the petroleum industry. Measures to reduce emissions are grouped into four: (1) Taxes on the emitted quantity, (2) Regulations that force companies to use certain processes or technologies, (3) Emission permits, (4) Information.

Factors affecting buccal corridor space in Angle′s Class II Division 1 malocclusion

Directory of Open Access Journals (Sweden)

Rashmi Bhat

2014-01-01

Full Text Available Background and Objectives: Buccal corridor space has been thought of primarily in terms of maxillary width, but there is also evidence that they are heavily influenced by the antero-posterior position of maxilla. The present study was undertaken with an aim of evaluating and comparing the dental and skeletal factors related to buccal corridor space in individuals having Class I and Class II Division 1 malocclusions. Materials and Methods: A total of 80 subjects of which 40 were males and 40 were females in the age group of 20-30 years were selected as per inclusion criteria and were grouped as Group I having Class I malocclusion and as Group II having Class II malocclusions based on angle ANB. 12 linear and 2 angular cephalometric measurements and 4 study cast measurements were used to correlate with the buccal corridor linear ratio (BCLR, calculated on smile photograph using the Adobe Photoshop 7.0 software (Adobe Systems Inc., San Jose, California, USA. The data obtained was statistically evaluated using independent t-test and multiple linear regression analysis. Result: Buccal corridor space is larger in individuals with Class II Division 1 malocclusion when compared with individuals with Class I malocclusions. There exists a significant difference in buccal corridor space between males and females. Conclusion: The present study helps in establishing the correlation between certain factors and the amount of buccal corridor space in individuals having skeletal Class II pattern.

Emissions trading in international aviation. Possible design options for an emissions trading scheme and their impact on climate change and the aviation industry

International Nuclear Information System (INIS)

Deuber, Odette; Cames, Martin

2003-01-01

According to the Intergovernmental Panel on Climate Change (IPCC), the contribution of aviation to global warm-ing was 3.5 % in 1992. Considering the average growth rate of 4 % per year, the share might be more than doubled by the end of the first commitment period of the Kyoto Protocol (2012). However, due to difficulties in allocating emissions from international aviation to individual countries, these emissions are exempt from commitments under the Kyoto Protocol, although in Article 2.2 the Parties to the Protocol are obliged to stabilize and reduce greenhouse gas emissions from international aviation. To comply with this obligation, the introduction of emissions trading in international aviation is being discussed within the International Civil Aviation Organisation (ICAO). This paper analyses the design options of such an emissions trading scheme and its impact on climate change and the aviation industry. Among other matters, it discusses issues such as open and closed emissions trading schemes, coverage of gases, initial allocation of allowances and possible caps for the aviation industry. It is based on a re-search project that has been carried out on behalf of the German Federal Environmental Agency. The paper reveals that despite complex tropospheric and stratospheric interactions, as well as allocation problems, there are adequate structural options for the design of an emissions trading scheme. Given an adequate structure, emissions trading offers a great incentive to optimise flight routes not only according to economic but also to climatic factors. Consequently, the system would effectively reduce the contribution of aviation to climate change

Recent trends of the emission characteristics from the road construction industry.

Science.gov (United States)

Chauhan, Sippy K; Sharma, Sangita; Shukla, Anuradha; Gangopadhyay, S

2010-11-01

Bitumen is a black, thermoplastic, hydrocarbon material derived from the processing of crude oil. At ambient temperature, bitumen is solid and does not present any health/environmental risks. This is one of the main reasons that bitumen is widely used for road construction all over the world. But during manufacturing/modification according to its application, storage, transportation, and use of bitumen is heated giving off various hydrocarbons emissions. In recent years, there has been increasing interest in investigating the potential of bitumen emissions to cause health effects. This is mainly because of the reason that bitumen has small amount of poly-aromatic hydrocarbons, along with some other volatiles like benzene, toluene, etc., which are known to be carcinogenic in nature. Thus, assessment of the emission characteristics and health hazards of bitumen fumes may have far reaching industrial economic and public health implications. In this review, we will discuss about the emission characteristics from bitumen, asphalts, or road construction, which is mainly contributed by bitumen fumes. Sampling strategies and analytical methods employed are also described briefly.

Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Arens, Marlene [Fraunhofer Inst. for Systems and Innovation Research (ISI), Karlsruhe (Germany)

2013-01-31

Iron and steel manufacturing is among the most energy-intensive industries and accounts for the largest share, approximately 27 percent, of global carbon dioxide (CO₂) emissions from the manufacturing sector. The ongoing increase in world steel demand means that this industry’s energy use and CO₂ emissions continue to grow, so there is significant incentive to develop, commercialize and adopt emerging energy-efficiency and CO₂ emissions-reduction technologies for steel production. Although studies from around the world have identified a wide range of energy-efficiency technologies applicable to the steel industry that have already been commercialized, information is limited and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on 56 emerging iron and steel industry technologies, with the intent of providing a well-structured database of information on these technologies for engineers, researchers, investors, steel companies, policy makers, and other interested parties. For each technology included, we provide information on energy savings and environmental and other benefits, costs, and commercialization status; we also identify references for more information.

Emission of PCDD/Fs and dioxin-like PCBs from metallurgy industries in S. Korea.

Science.gov (United States)

Yu, Byeong-Woon; Jin, Guang-Zhu; Moon, Young-Hoon; Kim, Min-Kwan; Kyoung, Jong-Dai; Chang, Yoon-Seok

2006-01-01

The metallurgy industry and municipal waste incinerators are considered the main sources of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) in many countries. This study investigated the emission factors and total emissions of PCDD/Fs and dioxin-like polychlorinated biphenyls (PCBs) emitted from metallurgy industries (including ferrous and nonferrous foundries) in Korea. The toxic equivalency (TEQ) emission factor of PCDD/Fs was the highest for secondary copper production, at 24451 ng I-TEQ/ton. The total estimated emissions of PCDD/Fs from these sources were 35.259 g I-TEQ/yr, comprising 0.088 g I-TEQ/yr from ferrous foundries, 31.713 g I-TEQ/yr from copper production, 1.716 g I-TEQ/yr from lead production, 0.111 g I-TEQ/yr from zinc production, and 1.631 g I-TEQ/yr from aluminum production. The total estimated annual amounts of dioxin-like PCBs emitted from these sources were 13.260 g WHO-TEQ/yr, comprising 0.014 g WHO-TEQ/yr from ferrous foundries, 12.675 g WHO-TEQ/yr from copper production, 0.170 g WHO-TEQ/yr from lead production, 0.017 g WHO-TEQ/yr from zinc production, and 0.384 g WHO-TEQ/yr from aluminum production. The highest emission factor was found for secondary copper smelting, at 9770 ng WHO-TEQ/ton.

Indirect Validation of Probe Speed Data on Arterial Corridors

Energy Technology Data Exchange (ETDEWEB)

Eshragh, Sepideh [Center for Advanced Transportation Technology, University of Maryland, College Park, 5000 College Avenue, Suite 2206, College Park, MD 20742; Young, Stanley E. [National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, CO 80401; Sharifi, Elham [Center for Advanced Transportation Technology, University of Maryland, College Park, 5000 College Avenue, Suite 2206, College Park, MD 20742; Hamedi, Masoud [Center for Advanced Transportation Technology, University of Maryland, College Park, 5000 College Avenue, Suite 2206, College Park, MD 20742; Sadabadi, Kaveh Farokhi [Center for Advanced Transportation Technology, University of Maryland, College Park, 5000 College Avenue, Suite 2206, College Park, MD 20742

2017-01-01

This study aimed to estimate the accuracy of probe speed data on arterial corridors on the basis of roadway geometric attributes and functional classification. It was assumed that functional class (medium and low) along with other road characteristics (such as weighted average of the annual average daily traffic, average signal density, average access point density, and average speed) were available as correlation factors to estimate the accuracy of probe traffic data. This study tested these factors as predictors of the fidelity of probe traffic data by using the results of an extensive validation exercise. This study showed strong correlations between these geometric attributes and the accuracy of probe data when they were assessed by using average absolute speed error. Linear models were regressed to existing data to estimate appropriate models for medium- and low-type arterial corridors. The proposed models for medium- and low-type arterials were validated further on the basis of the results of a slowdown analysis. These models can be used to predict the accuracy of probe data indirectly in medium and low types of arterial corridors.

CRITERIA POLLUTANT EMISSIONS FROM INTERNAL COMBUSTION ENGINES IN THE NATURAL GAS INDUSTRY VOLUME 1. TECHNICAL REPORT

Science.gov (United States)

The report summarizes emission factors for criteria pollutants (NOx, CO, CH4, C2H6, THC, NMHC, and NMEHC) from stationary internal combustion engines and gas turbines used in the natural gas industry. The emission factors were calculated from test results from five test campaigns...

The significance of the Danube ecological corridor in the proceedings of implementing ecological networks in Serbia

Directory of Open Access Journals (Sweden)

Filipović Dejan

2015-01-01

Full Text Available With the modern processes for exploiting land people have altered the original appearance of areas and created cultural environments. The remaining natural environments, whether protected or not, take up a relatively small portion of space and represent isolated islands which in itself can not be sufficient for the preservation of biodiversity or for the fulfillment of national, regional or international goals and commitments related to their preservation. In order to secure the preservation of biodiversity, the strengthening of integrity and the natural processes, such as animal migrations, succession of vegetation and evolution processes, the communication between natural habitats is imperative. Ecological corridors, as integral elements of ecological networks, ensure the preservation of vital ecological interactions by providing a connection between different habitats or areas. Depending on a range of factors, from the fulfillment of demands of different species to the connecting of regions, corridors of local, sub-regional, regional and international importance are identified. The Danube ecological corridor is one of the most significant corridors of international importance which encompasses a large number of habitats which are part of the natural watercourse of the corridor. There are numerous protected areas in the Danube coastal area on Serbia's territory which present themselves as central areas for forming the ecological network, such as: Gornje Podunavlje, Karađorđevo, Fruška Gora, Titelski Breg hill, Kovalski rit marsh, Dunavski loess bluffs, the Sava mouth, Labudovo okno, Deliblato sands, Đerdap and Mala Vrbica. The diverse and mosaic vegetation of the floodplain, as well as the consistency of the protected areas within the Danube corridor have a direct influence on the quality and functionality of this corridor. The goal of this paper is to show the significance of the Danube ecological corridor in the process of implementing

Maxillary arch width and buccal corridor changes with Damon and conventional brackets: A retrospective analysis.

Science.gov (United States)

Shook, Corey; Kim, Sohyon Michelle; Burnheimer, John

2016-07-01

To evaluate the effect of Damon self-ligating and conventional bracket systems on buccal corridor widths and areas. A retrospective sample of consecutively treated patients using either conventional (CG, n  =  45) or Damon self-ligating (SL, n  =  39) brackets was analyzed to determine any differences in buccal corridor widths and areas both within and between groups. Pretreatment and posttreatment frontal photographs were transferred to Photoshop CC, standardized using intercanthal width, and linear and area measurements were performed with tools in Photoshop CC. Ratios were then calculated for statistical analysis. Relationships between arch widths and buccal corridors were also examined. There were no significant differences in the posttreatment intercanine or intermolar widths either within or between the CG and SL groups. There were no significant differences in any buccal corridor width or area measurement either within or between the CG and SL groups. There were strong correlations with the intercanine width and the corresponding buccal corridor smile width measurements. There was an inverse correlation with the buccal corridor area in relation to the canine and the total smile width. It is likely that posttreatment increases in arch width can be seen in patients treated with either a conventional bracket system or the Damon system. It is highly unlikely that there is any significant difference in buccal corridor width or area in patients treated with the Damon self-ligating system or a conventional bracket system.

Industrial processes inventory. Sector 2

International Nuclear Information System (INIS)

1994-01-01

The work objective is to conduct a greenhouse gas emission inventory of the industrial processes in Lebanon for the year 1994. The Lebanese industry has emitted 1924.063 Gg (1.924.063 tons) of Carbon dioxide CO 2 ; 0.0003 Gg (0.3 tons) of carbon monoxide CO; 0.01112 Gg of nitrogen oxide NO; 273.888 tons of non-methane volatile organic compounds and 3.382 Gg (3.382 tons) of sulphur dioxide SO 2 . The cement industry is the major source of CO 2 emissions among the industrial processes in Lebanon. The cement industry is responsible for 76.1% of the total emissions followed by the iron and steel industry which produces 21.68% of the total CO 2 emissions from industrial processes. The NMVOC emissions are mainly produced by the use of asphalt for road paving (98.5% of total emissions by industry) followed by the food and beverage industry (1.2%). The emissions of sulphur dioxide SO 2 come from three industrial sources: the first come from the production of sulphuric acid (69.9% of total industrial emissions), the second from the cement industry (26.4% of total industrial emissions) and the third from the iron and steel mills (3.7% of total industrial emissions). Figures are presented to show the percentage distribution of various industrial sources contributions to CO 2 , NMVOC and SO 2 emissions in Lebanon. Carbon monoxide CO emissions in the industrial sector are very small. The major source is iron and steel mills and the minor source is asphalt-roofing production

Emerging biorefinery technologies for Indian forest industry to reduce GHG emissions.

Science.gov (United States)

Sharma, Naman; Nainwal, Shubham; Jain, Shivani; Jain, Siddharth

2015-11-01

The production of biofuels as alternative energy source over fossil fuels has gained immense interest over the years as it can contribute significantly to reduce the greenhouse gas (GHG) emissions from energy production and utilization. Also with rapidly increasing fuel price and fall in oil wells, the present scenario forces us to look for an alternative source of energy that will help us in the operation of industrial as well as the transportation sector. The pulp mills in India are one of the many options. The pulp mills in India can help us to produce bio-fuels by thermo-chemical/biochemical conversion of black liquor and wood residues. These technologies include extraction of hemi-cellulose from wooden chips and black liquor, lignin from black liquor, methanol from evaporator condensates, biogas production from waste sludge, syngas production from biomass using gasification and bio-oil production from biomass using pyrolysis. The objective of this paper is to overview these emerging bio-refinery technologies that can be implemented in Indian Forest Industry to get bio-fuels, bio-chemicals and bio-energy to reduce GHG emissions. Copyright © 2015 Elsevier Inc. All rights reserved.

A contribution to the characterisation of natural and industrial crystalline emissions using electron beam and X-ray techniques

International Nuclear Information System (INIS)

Riedel, F.N.

1980-01-01

In this work the composition of dusts of different origin is studied based on the assumption that natural and industrial emissions sources may possibly be differentiated by the emission of characteristic minerals and compounds. Only if some of these compounds or certain groups of compounds can be associated with a distinct emission source, such compounds may be considered as guiding compounds or guiding minerals. In this case the emission sources should be identified unambiguously even over large distances. In the air pollution studies performed in the past, the emphasis has been laid mainly on gases like SO 2 , CO, CO 2 , NOsub(x), and HF, without paying much attention to the crystalline and amorphous components, which are present simultaneously. This study is restricted to the dust-like component of natural and industrial emission sources to get more information on its composition. In part these emissions are less dangerous in the compound state, as for example fluorine in the mica type mineral muskovite (KAl 2 [(OH,F) 2 AlSi 3 O 10 ]. As a working hypothesis it has been assumed that based on a series of investigations these compounds can be identified using electron miscroscopy and electron diffraction. In the presence of larger quantities of emission materials also X-ray techniques as Debye-Scherrer- or gonio methods can be applied. Reliable results can only be obtained by an investigation covering a broad area of industrial production. (orig./RW) [de

Dynamic network expansion, contraction, and connectivity in the river corridor of mountain stream network

Science.gov (United States)

Ward, A. S.; Schmadel, N.; Wondzell, S. M.

2017-12-01

River networks are broadly recognized to expand and contract in response to hydrologic forcing. Additionally, the individual controls on river corridor dynamics of hydrologic forcing and geologic setting are well recognized. However, we currently lack tools to integrate our understanding of process dynamics in the river corridor and make predictions at the scale of river networks. In this study, we develop a perceptual model of the river corridor in mountain river networks, translate this into a reduced-complexity mechanistic model, and implement the model in a well-studied headwater catchment. We found that the river network was most sensitive to hydrologic dynamics under the lowest discharges (Qgauge managers of water resources who need to estimate connectivity and flow initiation location along the river corridor over broad, unstudied catchments.

I-15 integrated corridor management : system requirements.

Science.gov (United States)

2011-07-01

This document is intended as a listing and discussion of the Requirements for the I-15 Integrated Corridor Management System : (ICMS) Demonstration Project in San Diego. This document describes what the system is to do (the functional requirements), ...

RISK CORRIDORS AND REINSURANCE IN HEALTH INSURANCE MARKETPLACES: Insurance for Insurers

OpenAIRE

LAYTON, TIMOTHY J.; MCGUIRE, THOMAS G.; SINAIKO, ANNA D.

2016-01-01

In order to encourage entry and lower prices, most regulated markets for health insurance include policies that seek to reduce the uncertainty faced by insurers. In addition to risk adjustment of premiums paid to plans, the Health Insurance Marketplaces established by the Affordable Care Act implement reinsurance and risk corridors. Reinsurance limits insurer costs associated with specific individuals, while risk corridors protect against aggregate losses. Both tighten the insurer's distribut...

40 CFR 63.1583 - What are the emission points and control requirements for an industrial POTW treatment plant?

Science.gov (United States)

2010-07-01

... control requirements for an industrial POTW treatment plant? 63.1583 Section 63.1583 Protection of... Pollutants: Publicly Owned Treatment Works Industrial Potw Treatment Plant Description and Requirements § 63.1583 What are the emission points and control requirements for an industrial POTW treatment plant? (a...

Center for the Polyurethanes Industry summary of unpublished industrial hygiene studies related to the evaluation of emissions of spray polyurethane foam insulation.

Science.gov (United States)

Wood, Richard D

2017-09-01

Spray polyurethane foam (SPF) insulation is used as thermal insulation for residential and commercial buildings. It has many advantages over other forms insulation; however, concerns have been raised related to chemical emissions during and after application. The American Chemistry Council's (ACC's) Center for the Polyurethanes Industry (CPI) has gathered previously unpublished industrial hygiene air sampling studies submitted by member companies that were completed during an eight-year period from 2007-2014. These studies address emissions from medium density closed cell and low density open cell formulations. This article summarizes the results of personal and area air samples collected during application and post application of SPF to interior building surfaces in both laboratory and field environments. Chemicals of interest included: Volatile Organic Compounds (VOCs), methylene diphenyl diisocyanate (MDI), flame retardants, amine catalysts, blowing agents, and aldehydes. Overall, the results indicate that SPF applicators and workers in close proximity to the application are potentially exposed to MDI in excess of recommended and governmental occupational exposure limits and should use personal protective equipment (PPE) consisting of air supplied respirators and full-body protective clothing to reduce exposure. Catalyst emissions can be reduced by using reactive catalysts in SPF formulations, and mechanical ventilation is important in controlling emissions during and after application.

Transportation policy and governance in the northeast corridor : an overview of major public agencies.

Science.gov (United States)

2009-08-01

One of the most consistent topics of discussion about the Northeast Corridor (hereafter : NEC or the Corridor), particularly the central portion between Boston and Washington, : D.C., is the viability and efficiency of its transportation ...

Denitrification capacity and greenhouse gas emissions of soils in channelized and restored reaches along an Alpine river corridor

Science.gov (United States)

Shrestha, Juna; Niklaus, Pascal; Samaritani, Emanuela; Frossard, Emmanuel; Tockner, Klement; Luster, Jörg

2010-05-01

In order to assess the effects of river restoration on water and air quality, the biogeochemical functions of channelized and restored river reaches have to be quantified. The objective of this study was to compare denitrification potential and greenhouse gas emissions of functional processing zones (FPZ) in a channelized and a recently restored reach of the alpine river Thur in north-eastern Switzerland. The study was part of the project cluster RECORD of the ETH domain, Switzerland, which was initiated to increase the mechanistic understanding of coupled hydrological and ecological processes in river corridors. The denitrification potential represents an important aspect of the soil filter function related to water quality. Besides, it also contributes to the emission of greenhouse gases. Extensively used pasture growing on a sandy loam is the characteristic FPZ of the channelized section. The restored section encompasses five FPZ: (i) bare gravel bars sparsely colonized by plants, (ii) gravel bars densely colonized by grass (mainly canary reed grass with up to 80 cm sandy deposits), (iii) mixed forest dominated by ash and maple, (iv) riparian forest dominated by willow (Salix alba), (v) older overbank sediments stabilized during restoration with young willows separating the forests from the river-gravel bar system (willow bush). The FPZ were sampled in January, April, August and October 2009. In addition, in June and July 2009 two flood events were monitored in the restored section with more frequent samplings. At each date, topsoil samples were collected in each FPZ (four replicates per samples) and analyzed for denitrifier enzyme activity (DEA). In addition, gas samples were taken in-situ using the closed chamber technique to measure soil respiration as well as N2O and CH4 fluxes. In all FPZ, the denitrification potential was mainly governed by soil moisture. It was highest in the willow forest exhibiting low spatial variability. The DEA in pasture, grass zone

Quantifying the uncertainties of China's emission inventory for industrial sources: From national to provincial and city scales

Science.gov (United States)

Zhao, Yu; Zhou, Yaduan; Qiu, Liping; Zhang, Jie

2017-09-01

A comprehensive uncertainty analysis was conducted on emission inventories for industrial sources at national (China), provincial (Jiangsu), and city (Nanjing) scales for 2012. Based on various methods and data sources, Monte-Carlo simulation was applied at sector level for national inventory, and at plant level (whenever possible) for provincial and city inventories. The uncertainties of national inventory were estimated at -17-37% (expressed as 95% confidence intervals, CIs), -21-35%, -19-34%, -29-40%, -22-47%, -21-54%, -33-84%, and -32-92% for SO2, NOX, CO, TSP (total suspended particles), PM10, PM2.5, black carbon (BC), and organic carbon (OC) emissions respectively for the whole country. At provincial and city levels, the uncertainties of corresponding pollutant emissions were estimated at -15-18%, -18-33%, -16-37%, -20-30%, -23-45%, -26-50%, -33-79%, and -33-71% for Jiangsu, and -17-22%, -10-33%, -23-75%, -19-36%, -23-41%, -28-48%, -45-82%, and -34-96% for Nanjing, respectively. Emission factors (or associated parameters) were identified as the biggest contributors to the uncertainties of emissions for most source categories except iron & steel production in the national inventory. Compared to national one, uncertainties of total emissions in the provincial and city-scale inventories were not significantly reduced for most species with an exception of SO2. For power and other industrial boilers, the uncertainties were reduced, and the plant-specific parameters played more important roles to the uncertainties. Much larger PM10 and PM2.5 emissions for Jiangsu were estimated in this provincial inventory than other studies, implying the big discrepancies on data sources of emission factors and activity data between local and national inventories. Although the uncertainty analysis of bottom-up emission inventories at national and local scales partly supported the ;top-down; estimates using observation and/or chemistry transport models, detailed investigations and

Potential for energy conservation and reduction of CO2 emissions in the Brazilian cement industry through 2015

International Nuclear Information System (INIS)

Soares, J.B.; Tolmasquim, M.T.

1999-01-01

The cement industry is characterized by intensive energy consumption throughout its production stages which, together with the calcination of its raw materials, accounts for significant amounts of greenhouse gases (GHG) emissions. In 1996, the Brazilian cement industry consumed 4.3% of the energy required by the industrial sector, contributing over 22 Mtons (Million of tons) of CO 2 . The prospects for growth in this sector in Brazil indicate rising demands for fossil fuels, with a consequent upsurge in emissions. The purpose of this article is to present the prospects for energy conservation in the Brazilian cement industry through to 2015, taking into account the introduction of new production technologies in this sector, the use of waste and low-grade fuels, cogeneration, the use of additives, and other measures, based on a technical and economic energy demand simulation model

Regulatory and economic instruments in order to reduce emissions of greenhouse gases by 2050: financial impacts on industry?

International Nuclear Information System (INIS)

Taithe, Alexandre

2013-06-01

Industrial groups will be exposed to increasingly stringent regulation measures against GHG emissions. Uncertainties over the form and extent of international cooperation on climate change should not begin to weaken the European voluntarism otherwise than concerning the targets level of ambition. Therefore, the degree of restraint will remain strong. Halving global emissions between 1990 and 2050 will involve a reduction by a factor of 4 of those in developed countries. However, given the difficulty of achieving such a goal in the diffuse sectors (households, agriculture, transport...), the European industry will most likely reduce its GHG emissions by a factor of 5 to 6. (author)

Wild felid species richness affected by a corridor in the Lacandona forest, Mexico

Directory of Open Access Journals (Sweden)

Gil–Fernández, M.

2017-02-01

Full Text Available Wild felids are one of the most vulnerable species due to habitat loss caused by fragmentation of ecosystems. We analyzed the effect of a structural corridor, defined as a strip of vegetation connecting two habitat patches, on the richness and habitat occupancy of felids on three sites in Marqués de Comillas, Chiapas, one with two isolated forest patches, the second with a structural corridor, and the third inside the Montes Azules Biosphere Reserve. We found only two species (L. pardalis and H. yagouaroundi in the isolated forest patches, five species in the structural corridor, and four species inside the Reserve. The corridor did not significantly affect occupancy, but due to the low detection rates, further investigation is needed to rule out differences. Our results highlight the need to manage habitat connectivity in the remaining forests in order to preserve the felid community of Marqués de Comillas, Chiapas, México.

Louisiana Speaks Regional Vision Transit Corridors, UTM Zone 15N NAD 83, Louisiana Recovery Authority (2007), [louisiana_speaks_vision_transit_corridors

Data.gov (United States)

Louisiana Geographic Information Center — This GIS shapefile data illustrates the primary and secondary transit corridors included in the Louisiana Speaks Regional Plan Vision. This network accommodates a...

FOSSIL FUEL INDUSTRIES

Science.gov (United States)

The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Worrell, Ernst; Khrushch, Marta

1999-09-01

Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions.

Sector trends and driving forces of global energy use and greenhouse gas emissions: focus in industry and buildings

International Nuclear Information System (INIS)

Price, Lynn; Worrell, Ernst; Khrushch, Marta

1999-01-01

Disaggregation of sectoral energy use and greenhouse gas emissions trends reveals striking differences between sectors and regions of the world. Understanding key driving forces in the energy end-use sectors provides insights for development of projections of future greenhouse gas emissions. This report examines global and regional historical trends in energy use and carbon emissions in the industrial, buildings, transport, and agriculture sectors, with a more detailed focus on industry and buildings. Activity and economic drivers as well as trends in energy and carbon intensity are evaluated. The authors show that macro-economic indicators, such as GDP, are insufficient for comprehending trends and driving forces at the sectoral level. These indicators need to be supplemented with sector-specific information for a more complete understanding of future energy use and greenhouse gas emissions

Swift fox survey along Heartland Expressway Corridor.

Science.gov (United States)

2015-05-01

The swift fox (Vulpes velox) is a small canid classified as endangered within the : state of Nebraska. Future construction of the Heartland Expressway Corridor (HEC), a : 300 km road expansion project in the panhandle of the state, may impact the res...

Are Emissions Trading Policies Sustainable? A Study of the Petrochemical Industry in Korea

Directory of Open Access Journals (Sweden)

Yongrok Choi

2016-10-01

Full Text Available In 2015, Korea inaugurated an emissions trading scheme (ETS. In this regard, many studies have considered the sustainable performance and efficiency of industries that emit carbon; however, few have examined ETS at company level. This paper focuses on companies’ data related to Korean ETS in the petrochemical industry. Based on the non-radial, nonparametric directional distance function (DDF, the paper evaluates the governance factors related to ETS policies and sustainable performance in terms of carbon technical efficiency (CTE, the shadow price of carbon emissions, and Morishima elasticity between the input and undesirable output of carbon emissions. Using a dual model, the paper shows that Korean ETS has huge potential for participating companies to improve CTE. If all companies consider the production possibility frontier, they could potentially improve efficiency by 52.8%. Further, Morishima elasticity shows strong substitutability between capital and energy, implying that green technology investment should bring a higher degree of energy-saving performance. Unfortunately, however, the market price of carbon emissions is far too low compared with its shadow price, suggesting that the Korean government’s price-oriented market intervention has resulted in the ETS producing poor sustainable performance. As the title suggests, ETS of Korea is not sustainable at the current stage, but with more efforts on the transition period, all the developing countries should support the governance factors of the ETS in terms of the more effective green investment with easier access to the green technology.

The critical role of the industrial sector in reaching long-term emission reduction, energy efficiency and renewable targets

International Nuclear Information System (INIS)

Fais, Birgit; Sabio, Nagore; Strachan, Neil

2016-01-01

Highlights: • A new industrial modelling approach in a whole energy systems model is developed. • The contribution of UK industry to long-term energy policy targets is analysed. • Emission reductions of up to 77% can be achieved in the UK industry until 2050. • The UK industry sector is essential for achieving the overall efficiency commitments. • UK industry can make a moderate contribution to the expansion of renewable energies. - Abstract: This paper evaluates the critical contribution of the industry sector to long-term decarbonisation, efficiency and renewable energy policy targets. Its methodological novelty is the incorporation of a process-oriented modelling approach based on a comprehensive technology database for the industry sector in a national energy system model for the UK (UKTM), allowing quantification of the role of both decarbonisation of upstream energy vectors and of mitigation options in the industrial sub-categories. This enhanced model is then applied in a comparative policy scenario analysis that explores various target dimensions on emission mitigation, renewable energy and energy efficiency at both a national and European level. The results show that ambitious emission cuts in the industry sector of up to 77% until 2050 compared to 2010 can be achieved. Moreover, with a reduction in industrial energy demand of up to 31% between 2010 and 2050, the sector is essential for achieving the overall efficiency commitments. The industry sector also makes a moderate contribution to the expansion of renewable energies mostly through the use of biomass for low-temperature heating services. However, additional sub-targets on renewable sources and energy efficiency need to be assessed critically, as they can significantly distort the cost-efficiency of the long-term mitigation pathway.

Modeling and Computation of Transboundary Industrial Pollution with Emission Permits Trading by Stochastic Differential Game.

Science.gov (United States)

Chang, Shuhua; Wang, Xinyu; Wang, Zheng

2015-01-01

Transboundary industrial pollution requires international actions to control its formation and effects. In this paper, we present a stochastic differential game to model the transboundary industrial pollution problems with emission permits trading. More generally, the process of emission permits price is assumed to be stochastic and to follow a geometric Brownian motion (GBM). We make use of stochastic optimal control theory to derive the system of Hamilton-Jacobi-Bellman (HJB) equations satisfied by the value functions for the cooperative and the noncooperative games, respectively, and then propose a so-called fitted finite volume method to solve it. The efficiency and the usefulness of this method are illustrated by the numerical experiments. The two regions' cooperative and noncooperative optimal emission paths, which maximize the regions' discounted streams of the net revenues, together with the value functions, are obtained. Additionally, we can also obtain the threshold conditions for the two regions to decide whether they cooperate or not in different cases. The effects of parameters in the established model on the results have been also examined. All the results demonstrate that the stochastic emission permits prices can motivate the players to make more flexible strategic decisions in the games.

Variables affecting energy efficiency and CO2 emissions in the steel industry

International Nuclear Information System (INIS)

Siitonen, Sari; Tuomaala, Mari; Ahtila, Pekka

2010-01-01

Specific energy consumption (SEC) is an energy efficiency indicator widely used in industry for measuring the energy efficiency of different processes. In this paper, the development of energy efficiency and CO 2 emissions of steelmaking is studied by analysing the energy data from a case mill. First, the specific energy consumption figures were calculated using different system boundaries, such as the process level, mill level and mill site level. Then, an energy efficiency index was developed to evaluate the development of the energy efficiency at the mill site. The effects of different production conditions on specific energy consumption and specific CO 2 emissions were studied by PLS analysis. As theory expects, the production rate of crude steel and the utilisation of recycled steel were shown to affect the development of energy efficiency at the mill site. This study shows that clearly defined system boundaries help to clarify the role of on-site energy conversion and make a difference between the final energy consumption and primary energy consumption of an industrial plant with its own energy production.

US-75 ICM system as-built design : Dallas Integrated Corridor Management (ICM) demonstration project.

Science.gov (United States)

2015-05-01

This As-Built document for the US-75 Integrated Corridor Management (ICM) Program has been developed as part of the US Department of Transportation Integrated Corridor Management Initiative. The basic premise behind the ICM initiative is that indepen...

Siliguri: A Geopolitical Manoeuvre Corridor in the Eastern Himalayan Region for China and India

Directory of Open Access Journals (Sweden)

Hasan Yaser Malik

2015-12-01

Full Text Available Siliguri Corridor being part of Indian West Bengal is a diplomatic manoeuvre place located between Nepal, Bhutan, Bangladesh, India’s Seven Sister States and Chumbi Hills in the Eastern Himalayan Region. Being located at the crossroads and centrally situated between all the neighbouring countries the landlocked Siliguri has an especially economic and political value for the regional countries. The corridor being in close proximity to China and India’s Seven Sister States has added to the diplomatic mosaic of the Eastern Himalayan Region. The region consists of beautiful landscape, mountains and rivers which not only add to topographical diversity but also demographic mixture. Despite its geopolitical significance the area could not advance for not only being a northeastern border region but also for being a gateway to the Seven Sister States. Peripheral development of Siliguri Corridor is one of the reasons for illegal practices like smuggling and terrorism. In year 2002 Nepal, Bhutan and Bangladesh discussed a proposal to form a free trade corridor to simplify the goods transportation through Siliguri Corridor but no such pact could be concluded that would have avoided the activities like smuggling and terrorism mainly through economic and diplomatic ventures.

The Padanian LiMeS. Spatial Interpretation of Local GHG Emission Data

Directory of Open Access Journals (Sweden)

Michèle Pezzagno

2015-04-01

Full Text Available The relevant role of spatial planning in the enforcement of climate change mitigation, managing the development of new low-carbon infrastructures and increasing system-wide efficiencies across sectors, has been addressed at global level (IPCC, 2014 WGIII. In this context, local GHG inventories appear a relevant tool toward the definition of a coherent, inter-sectorial background for local planning, mitigation, and adaptation policies.Taking advantage of consistent GHG emissions data availability in the Lombard context, local maps of direct GHG emissions have been linked with geographic data, including municipal boundaries, population data, and land-use information, produced and organized within the research PRIN 2007 From metropolitan city to metropolitan corridor: the case of the Po Valley Corridor.The results of this mapping exercise have been evaluated on the background of consolidated knowledge about northern Italy urban patterns, including the Linear Metropolitan System – LiMeS – and preliminary observations about characteristics, potential, and limits of the tool are proposed.

Landuse Types within Channel Corridor and River Channel Morphology of River Ona, Ibadan, Nigeria

Directory of Open Access Journals (Sweden)

Olutoyin Fashae

2017-12-01

Full Text Available The importance of river a corridor warrants a well thought out and balanced management approach because it helps in improving or maintaining water quality, protecting wetlands, etc. Hence, this study seeks to identify major landuse types within the River Ona Corridor; examine the impact of these landuse types within the River Ona corridor on its channel morphology and understand the risk being posed by these landuse types. The study is designed by selecting two reaches of six times the average width from each of the four major landuse types that exist along the river corridor. This study revealed that along the downstream section of Eleyele Dam of River Ona, natural forest stabilizes river channel banks, thereby presenting a narrow and shallow width and depth respectively but the widest of all is found at the agricultural zones.

Magnetic characteristics of industrial dust from different sources of emission: A case study of Poland

Science.gov (United States)

Szuszkiewicz, Marcin; Magiera, Tadeusz; Kapička, Aleš; Petrovský, Eduard; Grison, Hanna; Gołuchowska, Beata

2015-05-01

Dust emission and deposition in topsoil have negative effect on individual components of the ecosystem. In addition to routine geochemical analyses, magnetic measurements may provide useful complementary information related to the type, concentration and grain-size distribution of the technogenic magnetic particles (TMPs) and thus the degree of contamination of the environment. The aim of this contribution is to use magnetic parameters in distinguishing dust from a wide range of sources of air pollution (power industry, cement, coke, ceramic industries and biomass combustion). We measured magnetic susceptibility, hysteresis parameters and thermomagnetic curves. Our results suggest that predominant component in tested samples is magnetite, only dust from coking plant and the combustion of lignite contained also maghemite and/or hematite. Mixture of sizes, ranging from fine single-domain to coarse multi-domain grains, was detected. Our results indicate that industrial dusts from various sources of emissions have different specific magnetic properties and magnetic measurements may provide very helpful information.

78 FR 73559 - Moose-Wilson Corridor Comprehensive Management Plan, Environmental Impact Statement, Grand Teton...

Science.gov (United States)

2013-12-06

...-Wilson Corridor Comprehensive Management Plan, Environmental Impact Statement, Grand Teton National Park... is preparing a Comprehensive Management Plan and Environmental Impact Statement (EIS) for the Moose...; (2) distinguish the corridor's fundamental and other important resources and values; (3) clearly...

Report of study group 8.1 ''methane emissions caused by the gas industry world-wide''; Rapport du groupe d'etude 8.1 ''emissions de methane causees par l'industrie du gaz sur le plan international''

Energy Technology Data Exchange (ETDEWEB)

Altfeld, K.

2000-07-01

This report details the work undertaken by the WOC 8 Study Group 8.1 (methane emissions) in the triennium 1997 to 2000. The objective is to identify the major methane emission sources within the natural gas chain and to estimate from that the global methane emissions caused by the natural gas industry with a reasonable accuracy. Against the background of substantial uncertainties and insufficient data, a conservative approach has been adopted. The results presented in this report are based on a commonly agreed method using reasonable emission factors, on data provided by the operators inside the natural gas industry and on reliable data from literature. The total methane emissions caused by the gas industry world-wide were some 20,000 kt in 1995. This figure neither includes the methane emissions connected with the production of crude oil nor the methane emissions connected with associated gas which occurs during oil production and is not fed into a gas grid. More than half of the methane emissions can be attributed to three countries: USA, Canada and Russia, producing more than 50 % of the world natural gas. Related to the world's natural gas net production of approx. 79,000 PJ (net calorific value) the specific methane emission is approx. 0.26 kt/PJ (0.92 g/kWh). (Assuming - as a 'worst case' scenario - that natural gas is purely methane, a specific emission factor of 0.92 g/kWh corresponds to a leakage rate of 1.3 %). (author)

Modeling of the quality of water of River Tula, state of Hidalgo, Mexico

International Nuclear Information System (INIS)

Montelongo Casanova, Rosalba; Gordillo Martinez, Alberto Jose; Otazo Sanchez, Elena Maria; Villagomez Ibarra, Jose Roberto; Acevedo Sandoval, Otilio Arturo; Prieto Garcia, Francisco

2008-01-01

The central objective of this work is to model the quality of the water of Tula River, from the central emitter to their confluence with the Endho Dam. It was evaluated during two years, considering a length of 50 km in 4 zones and 35 sites of sampling. The central emitter contributes to the greater amount of organic matter, water without treatment of the city of Mexico and co urbane zone. The values of DBO varied from 1.16 up to 486.81 mg O 2 /L; the oxygen dissolved between 1.52 and 5.82 mg/L. This implies affectation for the development of the aquatic life. The alkalinity exceeded the ecological criteria of quality as a source of potable water with value of 458.01 mg. the fats displayed variations from 0.9 mg/l up to 18.1 mg/l and ammoniacal nitrogen outside the limits established for protection of the aquatic life with values from 0.09 a 64 mg/L; nitrates (6.24 mg/L) and nitrites (0.5-1.304 mg/L) exceed the ecological criteria. The metals cadmium, lead, iron, manganese and zinc are in concentrations over the permissible rank and in some sections mercury presence was reported. The fecal coliforms were detected in values from 2.1x10 4 up to 2.40x10 1 1 NMP/100 milliliters. In general, the toxicity in the residual water unloading demonstrated that all appears of moderate to high. Only there were three monitored stations (19%) with excellent quality, 3 smaller or equal DBOs to mg/L, which is considered like water no contaminated by biodegradable organic matter

Regional Distribution of Metals and C and N Stable Isotopes in the Epiphytic Ball Moss (Tillandsia Recurvata) at the Mezquital Valley, Hidalgo State

Science.gov (United States)

Zambrano-Garcia, A.; López-Veneroni, D.; Rojas, A.; Torres, A.; Sosa, G.

2007-05-01

As a part of the MILAGRO Field Campaign 2006, the influence of anthropogenic sources to metal air pollution in the Mezquital Valley, Hidalgo State, was explored by biomonitoring techniques. This valley is a major industrial- agriculture area located in central Mexico. An oil refinery, an electrical power plant, several cement plants with open-pit mines, as well as intensive wastewater-based agricultural areas, all within a 50 km radius, are some of the most important local sources of particulate air pollution. The concentrations of 25 metals and elements were determined by ICP-AES (EPA 610C method) for triplicate composite samples of the "ball moss" (T. recurvata ) collected at 50 sites. In addition, the ratios of two stable isotopes ((13C/12C and 15N/14N) were determined by continuous-flow isotope-ratio mass spectrometry in order to assess their potential as tracers for industrial emissions. Preliminary results showed high to very high average contents of several metals in the biomonitor compared to values from similar studies in other world regions, indicating a high degree of local air pollution. In contrast, most samples had Ag, As, Be, Se and Tl contents below detection levels (DL = 0.05 mg/kg of sample dry weight) indicating low levels of pollution by these metals. Metals such as Al, Ba, Ca, Fe, Li, Mo, Ni, Sr, Ti, V and Zn concentrated the most at the South portion of the valley, where the Tepeji-Tula-Apaxco industrial corridor is located. A transect parallel to the along-wind direction (N-S) showed a higher concentration of metals farther away from the sources relative to a cross-wind transect, which is consistent with the eolian transport of metal-enriched particles. Regional distribution maps of metals in the biomonitor showed that Al, Ba, Fe, Mo, Ni, Sr, Ti and V had higher levels at the industrial sampling sites; whereas K, Na and P were more abundant near to agriculture areas. Vanadium, a common element of crude oil, reflected better the influence from

A Model for Assessing Pedestrian Corridors. Application to Vitoria-Gasteiz City (Spain

Directory of Open Access Journals (Sweden)

Javier Delso

2017-03-01

Full Text Available From a mobility perspective, walking is considered to be the most sustainable transport mode. One of the consequences of motor-oriented urban configuration on pedestrian mobility is urban fragmentation, which affects sustainability in cities. In this paper, we use a natural-based approach to landscape fragmentation and connectivity (inherited from landscape ecology for pedestrian mobility planning. Our aim is to design a useful methodology to identify priority pedestrian corridors, and to assess the effects of implementing barrier-free pedestrian corridors in the city. For this purpose, we developed a method that integrates Geographical Information Systems (GIS network analysis with kernel density methods, which are commonly used for designating habitat corridors. It was applied to Vitoria-Gasteiz (Spain. Pedestrian mobility was assessed by comparison of travel times between different scenarios. Results show that the implementation of pedestrian corridors reduces travel time by approximately 6%. Thus, an intervention in a small percentage of the city’s street network could considerably reduce pedestrian travel times. The proposed methodology is a useful tool for urban and transport planners to improve pedestrian mobility and manage motorised traffic.

CRITERIA POLLUTANT EMISSIONS FROM INTERNAL COMBUSTION ENGINES IN THE NATURAL GAS INDUSTRY VOLUME II. APPENDICES A-I

Science.gov (United States)

The report summarizes emission factors for criteria pollutants (NOx, CO, CH4, C2H6, THC, NMHC, and NMEHC) from stationary internal combustion engines and gas turbines used in the natural gas industry. The emission factors were calculated from test results from five test campaigns...

Decoupling and Decomposition Analysis of Carbon Emissions from Industry: A Case Study from China

Directory of Open Access Journals (Sweden)

Qiang Wang

2016-10-01

Full Text Available China has overtaken the United States as the world’s largest producer of carbon dioxide, with industrial carbon emissions (ICE accounting for approximately 65% of the country’s total emissions. Understanding the ICE decoupling patterns and factors influencing the decoupling status is a prerequisite for balancing economic growth and carbon emissions. This paper provides an overview of ICE based on decoupling elasticity and the Tapio decoupling model. Furthermore, the study identifies the factors contributing to ICE changes in China, using the Kaya identity and Log Mean Divisia Index (LMDI techniques. Based on the effects and contributions of ICE, we close with a number of recommendations. The results revealed a significant upward trend of ICE during the study period 1994 to 2013, with a total amount of 11,147 million tons. Analyzing the decoupling relationship indicates that “weak decoupling” and “expansive decoupling” were the main states during the study period. The decomposition analysis showed that per capita wealth associated with industrial outputs and energy intensity are the main driving force of ICE, while energy intensity of industrial output and energy structure are major determinants for ICE reduction. The largest contributing cumulative effect to ICE is per capita wealth, at 1.23 in 2013. This factor is followed by energy intensity, with a contributing cumulative effect of −0.32. The cumulative effects of energy structure and population are relatively small, at 0.01 and 0.08, respectively.

The effect of urbanization and industrialization on carbon emissions in Turkey: evidence from ARDL bounds testing procedure.

Science.gov (United States)

Pata, Ugur Korkut

2018-03-01

This paper examines the dynamic short- and long-term relationship between per capita GDP, per capita energy consumption, financial development, urbanization, industrialization, and per capita carbon dioxide (CO 2 ) emissions within the framework of the environmental Kuznets curve (EKC) hypothesis for Turkey covering the period from 1974 to 2013. According to the results of the autoregressive distributed lag bounds testing approach, an increase in per capita GDP, per capita energy consumption, financial development, urbanization, and industrialization has a positive effect on per capita CO 2 emissions in the long term, and also the variables other than urbanization increase per capita CO 2 emissions in the short term. In addition, the findings support the validity of the EKC hypothesis for Turkey in the short and long term. However, the turning points obtained from long-term regressions lie outside the sample period. Therefore, as the per capita GDP increases in Turkey, per capita CO 2 emissions continue to increase.

Which industry is greener? An empirical study of nine industries in OECD countries

International Nuclear Information System (INIS)

Fujii, Hidemichi; Managi, Shunsuke

2013-01-01

This study analyzed the relationship between the CO 2 emissions of different industries and economic growth in OECD countries from 1970 to 2005. We tested an environmental Kuznets curve (EKC) hypothesis and found that total CO 2 emissions from nine industries show an N-shaped trend instead of an inverted U or monotonic increasing trend with increasing income. The EKC hypothesis for sector-level CO 2 emissions was supported in the (1) paper, pulp, and printing industry; (2) wood and wood products industry; and (3) construction industry. We also found that emissions from coal and oil increase with economic growth in the steel and construction industries. In addition, the non-metallic minerals, machinery, and transport equipment industries tend to have increased emissions from oil and electricity with economic growth. Finally, the EKC turning point and the relationship between GDP per capita and sectoral CO 2 emissions differ among industries according to the fuel type used. Therefore, environmental policies for CO 2 reduction must consider these differences in industrial characteristics. - Highlights: ► We analyze the relationship between CO 2 emissions and economic growth by industry. ► Wood, paper, and construction industries have an inverted U-shaped relationship. ► The turning points differ among industries according to the fuel type used. ► The policies for CO 2 reduction must consider differences in industrial characteristics

Carbon-14 based determination of the biogenic fraction of industrial CO(2) emissions - application and validation.

Science.gov (United States)

Palstra, S W L; Meijer, H A J

2010-05-01

The (14)C method is a very reliable and sensitive method for industrial plants, emission authorities and emission inventories to verify data estimations of biogenic fractions of CO(2) emissions. The applicability of the method is shown for flue gas CO(2) samples that have been sampled in 1-h intervals at a coal- and wood-fired power plant and a waste incineration plant. Biogenic flue gas CO(2) fractions of 5-10% and 48-50% have been measured at the power plant and the waste incineration plant, respectively. The reliability of the method has been proven by comparison of the power plant results with those based on carbon mass input and output data of the power plant. At industrial plants with relatively low biogenic CO(2) fraction (<10%) the results need to be corrected for sampled (14)CO(2) from atmospheric air. Copyright 2009 Elsevier Ltd. All rights reserved.

Urban Power Line Corridors as Novel Habitats for Grassland and Alien Plant Species in South-Western Finland.

Directory of Open Access Journals (Sweden)

Jussi Lampinen

Full Text Available Regularly managed electric power line corridors may provide habitats for both early-successional grassland plant species and disturbance-dependent alien plant species. These habitats are especially important in urban areas, where they can help conserve native grassland species and communities in urban greenspace. However, they can also provide further footholds for potentially invasive alien species that already characterize urban areas. In order to implement power line corridors into urban conservation, it is important to understand which environmental conditions in the corridors favor grassland species and which alien species. Likewise it is important to know whether similar environmental factors in the corridors control the species composition of the two groups. We conducted a vegetation study in a 43 kilometer long urban power line corridor network in south-western Finland, and used generalized linear models and distance-based redundancy analysis to determine which environmental factors best predict the occurrence and composition of grassland and alien plant species in the corridors. The results imply that old corridors on dry soils and steep slopes characterized by a history as open areas and pastures are especially suitable for grassland species. Corridors suitable for alien species, in turn, are characterized by productive soils and abundant light and are surrounded by a dense urban fabric. Factors controlling species composition in the two groups are somewhat correlated, with the most important factors including light abundance, soil moisture, soil calcium concentration and soil productivity. The results have implications for grassland conservation and invasive alien species control in urban areas.

Noise source emissions, Richton Dome site, Mississippi

International Nuclear Information System (INIS)

1987-01-01

Noise source data and use factors for modeling the environmental noise environment expected from salt-site repository activity were provided by Battelle Columbus Division. This report has been prepared for the purpose of documenting the development of the data provided to the Repository Project Management (RPM) organization. The data provided encompasses all phases of activity, from site preparation through construction of the exploratory shaft facility (ESF). Noise environments expected from construction and operation of transportation corridors associated with the activity were also modeled. Data for the construction of transportation corridors were provided. The equipment inventory, including sound-power levels for each item is included as Appendix A. Emission source terms provided by Parsons Brinckerhoff/PB-KBB for the ESF were used as a basis for the noise source emission inventory development. Where available, research results containing complete spectra were used. In cases where complete data were not available, a sound-pressure spectrum was synthesized from a characteristic spectrum shape from a similar piece of equipment. For example, a front-shovel excavator might be approximated by data from a front-end loader of similar horsepower range. Sound-power-level spectra were then calculated from the sound-pressure-level data. 14 refs

Contribution of Fugitive Emissions for PM10 Concentrations in an Industrial Area of Portugal

Science.gov (United States)

Marta Almeida, Susana; Viana Silva, Alexandra; Garcia, Silvia; Miranda, Ana Isabel

2013-04-01

Significant atmospheric dust arises from the mechanical disturbance of granular material exposed to the air. Dust generated from these open sources is termed "fugitive" because it is not discharged to the atmosphere in a confined flow stream. Common sources of fugitive dust include unpaved roads, agricultural tilling operations, aggregate storage piles, heavy construction and harbor operations. The objective of this work was to identify the likeliness and extend of the PM10 limit value exceedences due to fugitive emissions in a particularly zone where PM fugitive emissions are a core of environmental concerns - Mitrena, Portugal. Mitrena, is an industrial area that coexists with a high-density urban region (Setúbal) and areas with an important environmental concern (Sado Estuary and Arrábida which belongs to the protected area Natura 2000 Network). Due to the typology of industry sited in Mitrena (e.g. power plant, paper mill, cement, pesticides and fertilized productions), there are a large uncontrolled PM fugitive emissions, providing from heavy traffic and handling and storage of raw material on uncover stockyards in the harbor and industries. Dispersion modeling was performed with the software TAPM (The Air Pollution Model) and results were mapped over the study area, using GIS (Geographic Information Systems). Results showed that managing local particles concentrations can be a frustrating affair because the weight of fugitive sources is very high comparing with the local anthropogenic stationary sources. In order to ensure that the industry can continue to meet its commitments in protecting air quality, it is essential to warrant that the characteristics of releases from all fugitive sources are fully understood in order to target future investments in those areas where maximum benefit will be achieved.

Industry

Energy Technology Data Exchange (ETDEWEB)

Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

2007-12-01

This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

Size distribution and concentrations of heavy metals in atmospheric aerosols originating from industrial emissions as predicted by the HYSPLIT model

Science.gov (United States)

Chen, Bing; Stein, Ariel F.; Maldonado, Pabla Guerrero; Sanchez de la Campa, Ana M.; Gonzalez-Castanedo, Yolanda; Castell, Nuria; de la Rosa, Jesus D.

2013-06-01

This study presents a description of the emission, transport, dispersion, and deposition of heavy metals contained in atmospheric aerosols emitted from a large industrial complex in southern Spain using the HYSPLIT model coupled with high- (MM5) and low-resolution (GDAS) meteorological simulations. The dispersion model was configured to simulate eight size fractions (17 μm) of metals based on direct measurements taken at the industrial emission stacks. Twelve stacks in four plants were studied and the stacks showed considerable differences for both emission fluxes and size ranges of metals. We model the dispersion of six major metals; Cr, Co, Ni, La, Zn, and Mo, which represent 77% of the total mass of the 43 measured elements. The prediction shows that the modeled industrial emissions produce an enrichment of heavy metals by a factor of 2-5 for local receptor sites when compared to urban and rural background areas in Spain. The HYSPLIT predictions based on the meteorological fields from MM5 show reasonable consistence with the temporal evolution of concentrations of Cr, Co, and Ni observed at three sites downwind of the industrial area. The magnitude of concentrations of metals at two receptors was underestimated for both MM5 (by a factor of 2-3) and GDAS (by a factor of 4-5) meteorological runs. The model prediction shows that heavy metal pollution from industrial emissions in this area is dominated by the ultra-fine (<0.66 μm) and fine (<2.5 μm) size fractions.

Developing transit-oriented corridors: insights from Tokyo

NARCIS (Netherlands)

Chorus, P.; Bertolini, L.

2016-01-01

Various studies have pointed out that a successful integration of public transport and land use requires plans covering the entire metropolitan region that are consistent over a long period of time. The proposition that is explored in this article is that railway corridors can offer an effective

Retrospective of CO{sub 2} emissions of the Mexican industrial sector; Retrospectiva de emisiones de CO{sub 2} del sector industrial mexicano

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Domingo; Martinez, Manuel [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

The carbon dioxide emissions of the Mexican Industrial Sector throughout the period of 1965-2003 are analyzed, in terms of 16 branches of the industrial economic activity, as it is marked by the proposed disintegration of the Sistema de Cuentas Nacionales of the Intituto Nacional de Estadistica, Geografia e Informatica (INEGI) and the National Balance of Energy 2003 (BNE-2003). The CO{sub 2} emissions by the energy use have a behavior very similar to the one of the consumption of the final energy, which reflects that non significant changes in the composition of used fuels have existed. During this period the CO{sub 2} emissions increased 230%. The industrial branches that have shown significant changes in the CO{sub 2} emission are Construction, Bottled Water, Rubber, Cement, Beer and Malta and Chemistry. In order to evaluate the effects of the Activity, Structure, Power Intensity, fuel Mixture of final use and fuel Mixture used in electricity generation the decomposition model of CO{sub 2} is used based on the Laspeyres index. The calculated effects show that the main increase of total carbon dioxide of the SIM is referred to the Activity with an average rate of annual growth (TMCA) of 4.32%; whereas the effect that mitigates more the CO{sub 2} emission is the one described by the power Intensity and is equivalent to a TMCA of -0.85%. [Spanish] Se analizan las emisiones de bioxido de carbono del Sector Industrial Mexicano a lo largo del periodo de 1965-2003, en termino de 16 ramas de actividad economica industrial como lo marca la desagregacion propuesta por el Sistema de Cuentas Nacionales del Instituto Nacional de Estadistica, Geografia e Informatica (INEGI) y el Balance Nacional de Energia 2003 (BNE-2003). Las emisiones de CO{sub 2} por el uso de energia tienen un comportamiento muy similar al de consumo de energia final, lo que refleja que no han existido cambios significativos en la composicion de los combustibles empleados. Durante este periodo las

Emissions of volatile organic compounds (VOCs) from the food and drink industries of the European community

Science.gov (United States)

Passant, Neil R.; Richardson, Stephen J.; Swannell, Richard P. J.; Gibson, N.; Woodfield, M. J.; van der Lugt, Jan Pieter; Wolsink, Johan H.; Hesselink, Paul G. M.

Estimates were made of the amounts of volatile organic compounds (VOCs) released into the atmosphere as a result of the industrial manufacture and processing of food and drink in the European Community. The estimates were based on a review of literature sources, industrial and government contacts and recent measurements. Data were found on seven food manufacturing sectors (baking, vegetable oil extraction, solid fat processing, animal rendering, fish meal processing, coffee production and sugar beet processing) and three drink manufacturing sectors (brewing, spirit production and wine making). The principle of a data quality label is advocated to illustrate the authors' confidence in the data, and to highlight areas for further research. Emissions of ethanol from bread baking and spirit maturation were found to be the principle sources. However, significant losses of hexane and large quantities of an ill-defined mixture of partially oxidized hydrocarbons were noted principally from seed oil extraction and the drying of plant material, respectively. This latter mixture included low molecular weight aldehydes, carboxylic acids, ketones, amines and esters. However, the precise composition of many emissions were found to be poorly understood. The total emission from the food and drink industry in the EC was calculated as 260 kt yr -1. However, many processes within the target industry were found to be completely uncharacterized and therefore not included in the overall estimate (e.g. soft drink manufacture, production of animal food, flavourings, vinegar, tea, crisps and other fried snacks). Moreover, the use of data quality labels illustrated the fact that many of our estimates were based on limited data. Hence, further emissions monitoring is recommended from identified sources (e.g. processing of sugar beet, solid fat and fish meal) and from uncharacterized sources.

Modeling and Computation of Transboundary Industrial Pollution with Emission Permits Trading by Stochastic Differential Game.

Directory of Open Access Journals (Sweden)

Shuhua Chang

Full Text Available Transboundary industrial pollution requires international actions to control its formation and effects. In this paper, we present a stochastic differential game to model the transboundary industrial pollution problems with emission permits trading. More generally, the process of emission permits price is assumed to be stochastic and to follow a geometric Brownian motion (GBM. We make use of stochastic optimal control theory to derive the system of Hamilton-Jacobi-Bellman (HJB equations satisfied by the value functions for the cooperative and the noncooperative games, respectively, and then propose a so-called fitted finite volume method to solve it. The efficiency and the usefulness of this method are illustrated by the numerical experiments. The two regions' cooperative and noncooperative optimal emission paths, which maximize the regions' discounted streams of the net revenues, together with the value functions, are obtained. Additionally, we can also obtain the threshold conditions for the two regions to decide whether they cooperate or not in different cases. The effects of parameters in the established model on the results have been also examined. All the results demonstrate that the stochastic emission permits prices can motivate the players to make more flexible strategic decisions in the games.