Sample records for tsukatta yugen taisekiho
-
Energy Technology Data Exchange (ETDEWEB)
Kawashima, H. [Ship Research Inst., Tokyo (Japan); Miyata, H. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering
1996-12-31
With an objective to clarify possibility of application of time-advancing calculated fluid dynamic (CFD) simulation by using a finite volume method with moving grid system, a simulation was performed on motion of a ship with hydrofoils including the control system therein. The simulation consists of a method that couples a moving grid system technology, an equation of motion, and the control system. Complex interactions between wings and with free surface may be considered automatically by directly deriving fluid force from a flow field by using the CFD. In addition, two-dimensional flows around tandem hydrofoils were calculated to solve the motion problem within a vertical plane. As a result, the following results were obtained: a finite volume method using a dynamic moving grid system method was applied to problems in non-steady tandem hydrofoils to show its usefulness; a method that couples the CFD with the equation of motion was applied to the control problems in the tandem hydrofoils to show possibility of a new technology for simulating motions; and a simulation that considers such wing interference as wave creation, discharged vortices, and associated flows was shown useful to understand characteristics of the tandem hydrofoils. 13 refs., 14 figs.
-
Resistivity tomography using line electrode; Sendenryugen wo tsukatta hiteiko tomography
Energy Technology Data Exchange (ETDEWEB)
Sugimoto, Y [Dia Consultants Company, Tokyo (Japan)
1996-10-01
Resistivity tomography (RT) using line electrode was studied. Although line electrode is available even for RT, in casing line electrode, only one kind of electrode data is obtained. The calculation method of potential and sensitivity distributions based on line electrode is not yet established. Since various data in various measurement arrangements are required for analysis of RT, the new measurement method was devised which measures resistivities while successively changing the tip depth of line electrode. Until now, although potential has been calculated under the assumption that outflow current per unit length of line electrode is uniform, this assumption is incorrect. The new potential distribution calculation method was thus proposed. Sensitivity distribution calculation for inverse analysis is also described. RT using line electrode could precisely obtain deep information which couldn`t be obtained only by measurement along the surface measuring line. Although RT is poorer in accuracy than the previous point electrode method, it will be probably improved by 3-electrode arrangement. RT is also useful in the case difficult to apply point electrode method. 3 refs., 10 figs.
-
Plant growth regulation by the light of LEDs; LED ko wo tsukatta shokubutsu saibai gijutsu
Energy Technology Data Exchange (ETDEWEB)
Watanabe, H. [Mitsubishi Chemical Co., Tokyo (Japan). Yokohama Research Center
1996-03-01
Light Emitting Diode (LED) has not only an excellent display function for the luminescent device but also a superior feature without other lamps as light source for plant growth. It was National Aeronautics and Space Administration (NASA) to find out such merit for this light source for plant growth and try at first to use for plant growth at the space. They began to examine the LED application to the light source for the plant growth at the space since a stage at high cost of the LED, to develop some researches centered at cultivation of lettuce, wheat, and others. Finding out future possibility of cost-down of the LEDs on the cost/performance and large merits of the LEDs for control of the plant growth and plant physiology, authors have conducted some cultivation experiments of the plants using the LEDs for light source some years ago. In this papers, characterizations, actual possibility, and future developments of the LEDs for the light sources of the plant growth, are introduced. 5 refs., 4 figs.
-
Shadows alter facial expressions of Noh masks.
Directory of Open Access Journals (Sweden)
Nobuyuki Kawai
Full Text Available BACKGROUND: A Noh mask, worn by expert actors during performance on the Japanese traditional Noh drama, conveys various emotional expressions despite its fixed physical properties. How does the mask change its expressions? Shadows change subtly during the actual Noh drama, which plays a key role in creating elusive artistic enchantment. We here describe evidence from two experiments regarding how attached shadows of the Noh masks influence the observers' recognition of the emotional expressions. METHODOLOGY/PRINCIPAL FINDINGS: In Experiment 1, neutral-faced Noh masks having the attached shadows of the happy/sad masks were recognized as bearing happy/sad expressions, respectively. This was true for all four types of masks each of which represented a character differing in sex and age, even though the original characteristics of the masks also greatly influenced the evaluation of emotions. Experiment 2 further revealed that frontal Noh mask images having shadows of upward/downward tilted masks were evaluated as sad/happy, respectively. This was consistent with outcomes from preceding studies using actually tilted Noh mask images. CONCLUSIONS/SIGNIFICANCE: Results from the two experiments concur that purely manipulating attached shadows of the different types of Noh masks significantly alters the emotion recognition. These findings go in line with the mysterious facial expressions observed in Western paintings, such as the elusive qualities of Mona Lisa's smile. They also agree with the aesthetic principle of Japanese traditional art "yugen (profound grace and subtlety", which highly appreciates subtle emotional expressions in the darkness.
-
Shadows Alter Facial Expressions of Noh Masks
Kawai, Nobuyuki; Miyata, Hiromitsu; Nishimura, Ritsuko; Okanoya, Kazuo
2013-01-01
Background A Noh mask, worn by expert actors during performance on the Japanese traditional Noh drama, conveys various emotional expressions despite its fixed physical properties. How does the mask change its expressions? Shadows change subtly during the actual Noh drama, which plays a key role in creating elusive artistic enchantment. We here describe evidence from two experiments regarding how attached shadows of the Noh masks influence the observers’ recognition of the emotional expressions. Methodology/Principal Findings In Experiment 1, neutral-faced Noh masks having the attached shadows of the happy/sad masks were recognized as bearing happy/sad expressions, respectively. This was true for all four types of masks each of which represented a character differing in sex and age, even though the original characteristics of the masks also greatly influenced the evaluation of emotions. Experiment 2 further revealed that frontal Noh mask images having shadows of upward/downward tilted masks were evaluated as sad/happy, respectively. This was consistent with outcomes from preceding studies using actually tilted Noh mask images. Conclusions/Significance Results from the two experiments concur that purely manipulating attached shadows of the different types of Noh masks significantly alters the emotion recognition. These findings go in line with the mysterious facial expressions observed in Western paintings, such as the elusive qualities of Mona Lisa’s smile. They also agree with the aesthetic principle of Japanese traditional art “yugen (profound grace and subtlety)”, which highly appreciates subtle emotional expressions in the darkness. PMID:23940748
-
Energy Technology Data Exchange (ETDEWEB)
NONE
1999-07-30
Takano bamboo industry sold the style material 'Takebayashi, Saga' for the residence where bamboo charcoal was used. It is said that it can get equal effect in the amount of about 1 in three minutes even if it is compared with charcoal by the thing which it made use of the nature of the bamboo charcoal which it begins to vomit if water is inhaled and it is low for if humidity is pure. A back with the bamboo charcoal 1kg is laid 6 per 1m. It is laid under the floor of the house residence and the condominium, and it can be used easily in the errand, the existent residence as well. It was the space when the air humidity was 40-90%, and indoor humidity showed the numerical value, which faced though there was a change and which became stable in 60-70% as a result of actually doing an experiment in the house residence condominium. (translated by NEDO)
-
Energy Technology Data Exchange (ETDEWEB)
Akimoto, H. [Tottori University, Tottori (Japan). Faculty of Engineering
1997-06-01
A new simulation code WISDAM-7 is developed to simulate performance of a sailing boat moving three-dimensionally on a free surface. It adequately predicts forces acting on each element, such as hull, sail, keel and rudder, and use them as the inputs to solve equations of hull motion of 6 freedoms. Its major features are the grid system fit for both free and hull surfaces, generation of discrete space by the finite-volume method, handling of the velocity vectors directly as those in the Descartes system, velocity and pressure placed at the cell center, use of the moving grid system for free and object surfaces, and use of equations of hull motion of 6 freedoms. It is confirmed by comparing simulated motion of an IACC class yacht with the observed surface pressure distributions in the test tank that the new method satisfies the basic requirements for simulation of sailing boat motion and expands the applicable range of CFD to general motion conditions. 8 refs., 18 figs.
-
Energy Technology Data Exchange (ETDEWEB)
Furukawa, Y; Tomono, K; Takahashi, H; Uchida, T [Honda R and D Co. Ltd., Tokyo (Japan)
1997-10-01
A model of the belt analyzed by-ABAQUS (: a general nonlinear finite element program) successfully confirmed the mechanism that generates the belt cord stress. A quite good agreement between experimental and computed results for the stress distribution of the belt cord. It is found that maximum stress of the cords occurs near the root of the tooth by calculation, where the belt cords break off. 3 refs., 9 figs.
-
Energy Technology Data Exchange (ETDEWEB)
Neki, I.; Tada, T. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)
1996-12-31
This paper reports a method to develop a new finite element by source (FES) for a two-dimensional plane problem and a three-dimensional solid problem as a method to analyze ship body structures. The paper describes development of a plate bending element by using a similar method, and the fundamental principle thereof. The present method can prepare a finite element of an arbitrary shape by simply providing a contact point only on a boundary. It can also derive good calculation accuracy with less number of contact points and elements. These facts are shown by examples of analyses on a square plate, a triangle plate and a semi-circular plate. Particularly, since a plate bending problem has a large order of differential calculus in a governing equation, this method being a semi-analytical method derives a result with very good accuracy even with less number of contact points. A hypothetical boundary method or a hypothetical electric charge method presents not a very high accuracy even if a large number of contact points are provided. This is because the method hypothesizes only a bending moment vertical to the boundary, but does not consider a source of the moment relative to the boundary. In contrast, the present method hypothesizes both of bending and twisting as the sources, hence its accuracy is better than with the above two methods. 5 refs., 11 figs., 7 tabs.
-
Energy Technology Data Exchange (ETDEWEB)
Neki, I; Tada, T [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)
1997-12-31
This paper reports a method to develop a new finite element by source (FES) for a two-dimensional plane problem and a three-dimensional solid problem as a method to analyze ship body structures. The paper describes development of a plate bending element by using a similar method, and the fundamental principle thereof. The present method can prepare a finite element of an arbitrary shape by simply providing a contact point only on a boundary. It can also derive good calculation accuracy with less number of contact points and elements. These facts are shown by examples of analyses on a square plate, a triangle plate and a semi-circular plate. Particularly, since a plate bending problem has a large order of differential calculus in a governing equation, this method being a semi-analytical method derives a result with very good accuracy even with less number of contact points. A hypothetical boundary method or a hypothetical electric charge method presents not a very high accuracy even if a large number of contact points are provided. This is because the method hypothesizes only a bending moment vertical to the boundary, but does not consider a source of the moment relative to the boundary. In contrast, the present method hypothesizes both of bending and twisting as the sources, hence its accuracy is better than with the above two methods. 5 refs., 11 figs., 7 tabs.
-
Energy Technology Data Exchange (ETDEWEB)
Sanada, Y; Ashida, Y; Sassa, K [Kyoto University, Kyoto (Japan)
1996-10-01
3-D numerical modeling by FDTD method was studied for ground penetrating radar. Radar radiates electromagnetic wave, and determines the existence and distance of objects by reflection wave. Ground penetrating radar uses the above functions for underground surveys, however, its resolution and velocity analysis accuracy are problems. In particular, propagation characteristics of electromagnetic wave in media such as heterogeneous and anisotropic soil and rock are essential. The behavior of electromagnetic wave in the ground could be precisely reproduced by 3-D numerical modeling using FDTD method. FDTD method makes precise analysis in time domain and electric and magnetic fields possible by sequentially calculating the difference equation of Maxwell`s equation. Because of the high calculation efficiency of FDTD method, more precise complicated analysis can be expected by using the latest advanced computers. The numerical model and calculation example are illustrated for surface type electromagnetic pulse ground penetrating radar assuming the survey of steel pipes of 1m deep. 4 refs., 3 figs., 1 tab.
-
Energy Technology Data Exchange (ETDEWEB)
Takatori, O. [Japan Automobile Research Institute Inc., Tsukuba (Japan)
2000-01-01
The objective of this study is to analyze the crash characteristics of vehicles under the condition of real-world accidents. This paper pays attention to the differences in the crash characteristics of a vehicle colliding with a vehicle which is a different type. Vehicles on the market can be divided broadly into two vehicle structures, monocoque structure and frame structure. Monocoque structure is mainly used for passenger vehicles and frame structure is for recreational vehicles (RV). In recent years, RV has been a large seller on the market. So accidents between passenger vehicles and a RVs occur frequently. The analysis of experimental data and computer simulation, which is predicated on the experimental data, was carried out for this study. In the analysis of experimental data, barrier force data from the New Car Assessment Program (NCAP) were analyzed. The FE passenger vehicle model which is based on systematic validation tests was used for the computer simulation of car-to-car collisions. (author)
-
Energy Technology Data Exchange (ETDEWEB)
Fujikubo, M.; Yao, T.; Oida, H. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering
1996-12-31
Formulation was made on a one-dimensional beam finite element which is effective in analyzing structural response of very large floating structures by modeling them on beams on an elastic foundation. This element allows strict solution of vibration response in the beams on the elastic foundation to be calculated efficiently for a case where mass and rigidity change in the longitudinal direction. This analysis method was used to analyze structural response of a large pontoon-type floating structure to investigate mass in the end part for the structural response and the effect of decay while passing the structure. With a pontoon-type floating structure, reduction in bends and bending stress in the end part of the floating structure is important in designing the structure. Reducing the mass in the end part is effective as a means to avoid resonance in these responses and reduce the responses. Increase in rigidity of a floating structure shifts the peak in quasi-static response to lower frequency side, and reduces response in resonance, hence it is advantageous for improving the response. Since incident waves decay while passing through the floating structure, response in the lower wave side decreases. The peak frequency in the quasi-static response also decreases at the end part of the structure in the upper wave side due to decay in wave force. 7 refs., 11 figs., 1 tab.
-
Energy Technology Data Exchange (ETDEWEB)
Fujikubo, M; Yao, T; Oida, H [Hiroshima University, Hiroshima (Japan). Faculty of Engineering
1997-12-31
Formulation was made on a one-dimensional beam finite element which is effective in analyzing structural response of very large floating structures by modeling them on beams on an elastic foundation. This element allows strict solution of vibration response in the beams on the elastic foundation to be calculated efficiently for a case where mass and rigidity change in the longitudinal direction. This analysis method was used to analyze structural response of a large pontoon-type floating structure to investigate mass in the end part for the structural response and the effect of decay while passing the structure. With a pontoon-type floating structure, reduction in bends and bending stress in the end part of the floating structure is important in designing the structure. Reducing the mass in the end part is effective as a means to avoid resonance in these responses and reduce the responses. Increase in rigidity of a floating structure shifts the peak in quasi-static response to lower frequency side, and reduces response in resonance, hence it is advantageous for improving the response. Since incident waves decay while passing through the floating structure, response in the lower wave side decreases. The peak frequency in the quasi-static response also decreases at the end part of the structure in the upper wave side due to decay in wave force. 7 refs., 11 figs., 1 tab.
-
Energy Technology Data Exchange (ETDEWEB)
Sasaki, Y [Kyushu University, Fukuoka (Japan). Faculty of Engineering
1997-05-27
To enhance the reliability of electromagnetic/magnetotelluric (MT) survey, calculation results of finite-element methods (FEMs) and finite difference methods (FDMs) were compared. Accuracy of individual methods and convergence of repitition solution were examined. As a result of the investigation, it was found that appropriate accuracy can be obtained from the edge FEM and FDM for the example of vertical magnetic dipole, and that the best accuracy can be obtained from the FDM among four methods for the example of MT survey. It was revealed that the ICBCG (incomplete Cholesky bi-conjugate gradient) method is an excellent method as a solution method of simultaneous equations from the viewpoint of accuracy and calculation time. For the joint FEM, solutions of SOR method converged for both the examples. It was concluded that the cause of error is not due to the error of numerical calculation, but due to the consideration without discontinuity of electric field. The conditions of coefficient matrix increased with decreasing the frequency, which resulted in the unstable numerical calculation. It would be required to incorporate the constraint in a certain form. 4 refs., 12 figs.
-
Energy Technology Data Exchange (ETDEWEB)
NONE
2000-03-01
For a combination with COP3 Clean Development Mechanism (CDM), the paper reported the FY 1999 survey of the cogeneration project of Beijing Yanshan Petrochemical Co. The existing two heavy oil fueled boilers (steam output: 240t/h) are dismantled, and two gas turbines and two waste heat boilers (steam output: 241t/h, electricity output: 136.9MW) are installed. The energy conservation effect is approximately 0.91 million tons/year of crude oil. The effect of reduction in greenhouse gas emissions is CO2 2.83 million tons/year. A plan on system interconnection, distribution, electricity, instrumentation control was drawn up. The construction term is planned to be about two and a half years. The initial investment amount is 700 million yuan {+-} 100 million yuan. The expense vs. energy conservation effect was calculated as 98t (crude oil conversion)/year/million yen, and the expense vs. greenhouse gas emission reduction effect 302t-CO2/year/million yen. Concerning the profitability, the generating cost was 0.4 yuan/kWh which dropped from the selling power cost of the Yanshan area, 0.45 yuan/kWh. As candidates of the natural gas fueled cogeneration, there are possibilities of 10 sites and 550MW scale only in the Beijing area. (NEDO)
-
Energy Technology Data Exchange (ETDEWEB)
NONE
2000-03-01
An energy saving survey is conducted for the above named plant under a project expected to be linked to the clean development mechanism of COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). Supply/demand balance is poor at various utilities in this refinery, with surplus steam in summer and with hydrogen rich surplus off gas (flare combustion, discharge into the air) from the respective devices causing numerous problems about energy efficiency. Under the project, hydrogen will be recovered from the refinery off gas for utilization, systems related to fuel, steam, and power will be improved, and a surplus gas fired turbine power generating facility will be installed. Power generation of 29MW is feasible, which elevates the percentage of private power generation to the total demand for power from 25% to 71%. The purchase of power from external coal fired power stations will decrease greatly, contributing to energy saving. A yearly amount of 136-thousand tons of CO2 will be reduced thanks to the hydrogen recovery system and the gas turbine power generating facility to be newly installed. The Chinese party, much interested in the project, intends to be a participant as a joint implementer. The Japanese party has received a request for technological and financial assistance. (NEDO)
-
Energy Technology Data Exchange (ETDEWEB)
NONE
2001-03-01
For the purpose of conserving energy and reducing greenhouse effect gas emission, an investigational study was conducted for the project on the effective utilization of high-sulfur petroleum coke at Fujian Petrochemical Co., Fujian Province, China. In the project, IGCC (integrated gasification combined cycle) power generation facilities are introduced to the refinery of Fujian Petrochemical Co. By gasifying the residues produced from the refinery as raw material, the gas clean the same as natural gas is produced and is used as power generation use fuel. As a result of the study, the energy conservation amount was 94,300 toe/y, and was 1,414,500 toe in cumulative amount during 15 years. Further, the amount of greenhouse effect gas reduction was 291,600 t-CO2/y, and was 4,374,000 t-CO2 in cumulative amount during 15 years. The construction cost of the project is approximately 29.7 billion yen. The annual profit to be obtained from the project is approximately 8.66 billion yen, which is indicated by difference between before and after the implementation of the project. The calculated years required for return of investment were 3.4. (NEDO)